WorldWideScience

Sample records for demonstrated high internal

  1. Mining 81 Duesseldorf: An international high-rank demonstration of profiency

    Energy Technology Data Exchange (ETDEWEB)

    1981-07-01

    The topical shortage of raw materials and the renaissance of coal have contributed even more to the attractivity of the Bergbau 81 Internationale Fachmesse and Bergbau-Kongress (11th-17th June) held by the Duesseldorfer Messegesellschaft NOWEA. 653 exhibitors from 27 countries - among them for the first time - South America (Peru and Brazil), the USSR, Czechoslovakia, Romania from the Comecon sector, and Ireland - had presented their products. The German mining unions and the institutions related to them had concentrated their big special meetings - usually in different places during certain periods on the 'Bergbau 81' and given a demonstration of their present state of technology.

  2. Relays from Mars demonstrate international interplanetary networking

    Science.gov (United States)

    2004-08-01

    On 4 August at 14:24 CEST, as Mars Express flew over one of NASA’s Mars exploration rovers, Opportunity, it successfully received data previously collected and stored by the rover. The data, including 15 science images from the rover's nine cameras, were then downlinked to ESA’s European Space Operations Centre in Darmstadt (Germany) and immediately relayed to the Mars Exploration Rovers team based at the Jet Propulsion Laboratory in Pasadena, USA. NASA orbiters Mars Odyssey and Mars Global Surveyor have so far relayed most of the data produced by the rovers since they landed in January. Communication compatibility between Mars Express and the rovers had already been demonstrated in February, although at a low rate that did not convey much data. The 4 August session, at a transmit rate of 42.6 megabits in about six minutes, set a new mark for international networking around another planet. The success of this demonstration is the result of years of groundwork and was made possible because both Mars Express and the Mars rovers use the same communication protocol. This protocol, called Proximity-1, was developed by the international Consultative Committee for Space Data Systems, an international partnership for standardising techniques for handling space data. Mars Express was 1400 kilometres above the Martian surface during the 4 August session with Opportunity, with the goal of a reliable transfer of lots of data. Engineers for both agencies plan to repeat this display of international cooperation today, 10 August, with another set of Opportunity images. “We're delighted how well this has been working, and thankful to have Mars Express in orbit,” said Richard Horttor of NASA's Jet Propulsion Laboratory, Pasadena, California, project manager for NASA's role in Mars Express. JPL engineer Gary Noreen of the Mars Network Office said: “the capabilities that our international teamwork is advancing this month could be important in future exploration of Mars

  3. A highly pathogenic avian influenza virus H5N1 with 2009 pandemic H1N1 internal genes demonstrated increased replication and transmission in pigs

    Science.gov (United States)

    This study investigated the pathogenicity and transmissibility of a reverse-genetics derived highly pathogenic avian influenza (HPAI) H5N1 influenza A virus (IAV), A/Iraq/775/06, and a reassortant virus comprised of the HA and NA from A/Iraq/775/06 and the internal genes of a 2009 pandemic H1N1, A/N...

  4. INTERNATIONAL ENVIRONMENTAL TECHNOLOGY IDENTIFICATION, DEVELOPMENT, DEMONSTRATION, DEPLOYMENT AND EXCHANGE

    Energy Technology Data Exchange (ETDEWEB)

    Roy C. Herndon

    2001-02-28

    Cooperative Agreement (DE-FC21-95EW55101) between the U.S. Department of Energy (DOE) and the Florida State University's Institute for International Cooperative Environmental Research (IICER) was designed to facilitate a number of joint programmatic goals of both the DOE and the IICER related to international technology identification, development, demonstration and deployment using a variety of mechanisms to accomplish these goals. These mechanisms included: laboratory and field research; technology demonstrations; international training and technical exchanges; data collection, synthesis and evaluation; the conduct of conferences, symposia and high-level meetings; and other appropriate and effective approaches. The DOE utilized the expertise and facilities of the IICER at Florida State University to accomplish its goals related to this cooperative agreement. The IICER has unique and demonstrated capabilities that have been utilized to conduct the tasks for this cooperative agreement. The IICER conducted activities related to technology identification, development, evaluation, demonstration and deployment through its joint centers which link the capabilities at Florida State University with collaborating academic and leading research institutions in the major countries of Central and Eastern Europe (e.g., Czech Republic, Hungary, Poland) and Russia. The activities and accomplishments for this five-year cooperative agreement are summarized in this Final Technical Report.

  5. Process monitoring in international safeguards for reprocessing plants: A demonstration

    Energy Technology Data Exchange (ETDEWEB)

    Ehinger, M.H.

    1989-01-01

    In the period 1985--1987, the Oak Ridge National Laboratory investigated the possible role of process monitoring for international safeguards applications in fuel reprocessing plants. This activity was conducted under Task C.59, ''Review of Process Monitoring Safeguards Technology for Reprocessing Facilities'' of the US program of Technical Assistance to the International Atomic Energy Agency (IAEA) Safeguards program. The final phase was a demonstration of process monitoring applied in a prototypical reprocessing plant test facility at ORNL. This report documents the demonstration and test results. 35 figs.

  6. High voltage testing for the MAJORANA DEMONSTRATOR

    Energy Technology Data Exchange (ETDEWEB)

    Abgrall, N. [Nuclear Science Division, Lawrence Berkeley National Laboratory, Berkeley, CA (United States); Arnquist, I.J. [Pacific Northwest National Laboratory, Richland, WA (United States); Avignone, F.T. [Department of Physics and Astronomy, University of South Carolina, Columbia, SC (United States); Oak Ridge National Laboratory, Oak Ridge, TN (United States); Barabash, A.S. [National Research Center “Kurchatov Institute” Institute for Theoretical and Experimental Physics, Moscow (Russian Federation); Bertrand, F.E. [Oak Ridge National Laboratory, Oak Ridge, TN (United States); Bradley, A.W. [Nuclear Science Division, Lawrence Berkeley National Laboratory, Berkeley, CA (United States); Brudanin, V. [Joint Institute for Nuclear Research, Dubna (Russian Federation); Busch, M. [Department of Physics, Duke University, Durham, NC (United States); Triangle Universities Nuclear Laboratory, Durham, NC (United States); Buuck, M. [Center for Experimental Nuclear Physics and Astrophysics, and Department of Physics, University of Washington, Seattle, WA (United States); Byram, D. [Department of Physics, University of South Dakota, Vermillion, SD (United States); Caldwell, A.S. [South Dakota School of Mines and Technology, Rapid City, SD (United States); Chan, Y-D. [Nuclear Science Division, Lawrence Berkeley National Laboratory, Berkeley, CA (United States); Christofferson, C.D. [South Dakota School of Mines and Technology, Rapid City, SD (United States); Chu, P.-H. [Los Alamos National Laboratory, Los Alamos, NM (United States); Cuesta, C., E-mail: ccuesta@uw.edu [Center for Experimental Nuclear Physics and Astrophysics, and Department of Physics, University of Washington, Seattle, WA (United States); Detwiler, J.A.; Doe, P.J. [Center for Experimental Nuclear Physics and Astrophysics, and Department of Physics, University of Washington, Seattle, WA (United States); and others

    2016-07-01

    The MAJORANA Collaboration is constructing the MAJORANA DEMONSTRATOR, an ultra-low background, 44-kg modular high-purity Ge (HPGe) detector array to search for neutrinoless double-beta decay in {sup 76}Ge. The phenomenon of surface micro-discharge induced by high-voltage has been studied in the context of the MAJORANA DEMONSTRATOR. This effect can damage the front-end electronics or mimic detector signals. To ensure the correct performance, every high-voltage cable and feedthrough must be capable of supplying HPGe detector operating voltages as high as 5 kV without exhibiting discharge. R&D measurements were carried out to understand the testing system and determine the optimum design configuration of the high-voltage path, including different improvements of the cable layout and feedthrough flange model selection. Every cable and feedthrough to be used at the MAJORANA DEMONSTRATOR was characterized and the micro-discharge effects during the MAJORANA DEMONSTRATOR commissioning phase were studied. A stable configuration has been achieved, and the cables and connectors can supply HPGe detector operating voltages without exhibiting discharge.

  7. High voltage testing for the MAJORANA Demonstrator

    CERN Document Server

    Abgrall, N; Avignone, F T; Barabash, A S; Bertrand, F E; Bradley, A W; Brudanin, V; Busch, M; Buuck, M; Byram, D; Caldwell, A S; Chan, Y-D; Christofferson, C D; Chu, P -H; Cuesta, C; Detwiler, J A; Doe, P J; Dunagan, C; Efremenko, Yu; Ejiri, H; Elliott, S R; Fu, Z; Galindo-Uribarri, A; Giovanetti, G K; Goett, J; Green, M P; Gruszko, J; Guinn, I S; Guiseppe, V E; Henning, R; Hoppe, E W; Howard, S; Howe, M A; Jasinski, B R; Keeter, K J; Kidd, M F; Konovalov, S I; Kouzes, R T; LaFerriere, B D; Leon, J; Li, A; MacMullin, J; Martin, R D; Massarczyk, R; Meijer, S J; Mertens, S; Orrell, J L; O'Shaughnessy, C; Poon, A W P; Radford, D C; Rager, J; Rielage, K; Robertson, R G H; Romero-Romero, E; Shanks, B; Shirchenko, M; Snyder, N; Suriano, A M; Tedeschi, D; Thompson, A; Ton, K T; Trimble, J E; Varner, R L; Vasilyev, S; Vetter, K; Vorren, K; White, B R; Wilkerson, J F; Wiseman, C; Xu, W; Yakushev, E; Yu, C -H; Yumatov, V

    2016-01-01

    The MAJORANA Collaboration is constructing the MAJORANA Demonstrator, an ultra-low background, 44-kg modular high-purity Ge (HPGe) detector array to search for neutrinoless double-beta decay in Ge-76. The phenomenon of surface micro-discharge induced by high-voltage has been studied in the context of the MAJORANA Demonstrator. This eff?ect can damage the front-end electronics or mimic detector signals. To ensure the correct performance, every high-voltage cable and feedthrough must be capable of supplying HPGe detector operating voltages as high as 5 kV without exhibiting discharge. R&D measurements were carried out to understand the testing system and determine the optimum design configuration of the high-voltage path, including diff?erent improvements of the cable layout and feedthrough flange model selection. Every cable and feedthrough to be used at the MAJORANA Demonstrator was characterized and the micro-discharge eff?ects during the MAJORANA Demonstrator commissioning phase were studied. A stable c...

  8. High voltage testing for the MAJORANA DEMONSTRATOR

    Science.gov (United States)

    Abgrall, N.; Arnquist, I. J.; Avignone, F. T.; Barabash, A. S.; Bertrand, F. E.; Bradley, A. W.; Brudanin, V.; Busch, M.; Buuck, M.; Byram, D.; Caldwell, A. S.; Chan, Y.-D.; Christofferson, C. D.; Chu, P.-H.; Cuesta, C.; Detwiler, J. A.; Doe, P. J.; Dunagan, C.; Efremenko, Yu.; Ejiri, H.; Elliott, S. R.; Fu, Z.; Galindo-Uribarri, A.; Giovanetti, G. K.; Goett, J.; Green, M. P.; Gruszko, J.; Guinn, I. S.; Guiseppe, V. E.; Henning, R.; Hoppe, E. W.; Howard, S.; Howe, M. A.; Jasinski, B. R.; Keeter, K. J.; Kidd, M. F.; Konovalov, S. I.; Kouzes, R. T.; LaFerriere, B. D.; Leon, J.; Li, A.; MacMullin, J.; Martin, R. D.; Massarczyk, R.; Meijer, S. J.; Mertens, S.; Orrell, J. L.; O'Shaughnessy, C.; Poon, A. W. P.; Radford, D. C.; Rager, J.; Rielage, K.; Robertson, R. G. H.; Romero-Romero, E.; Shanks, B.; Shirchenko, M.; Snyder, N.; Suriano, A. M.; Tedeschi, D.; Thompson, A.; Ton, K. T.; Trimble, J. E.; Varner, R. L.; Vasilyev, S.; Vetter, K.; Vorren, K.; White, B. R.; Wilkerson, J. F.; Wiseman, C.; Xu, W.; Yakushev, E.; Yu, C.-H.; Yumatov, V.

    2016-07-01

    The MAJORANA Collaboration is constructing the MAJORANA DEMONSTRATOR, an ultra-low background, 44-kg modular high-purity Ge (HPGe) detector array to search for neutrinoless double-beta decay in 76Ge. The phenomenon of surface micro-discharge induced by high-voltage has been studied in the context of the MAJORANA DEMONSTRATOR. This effect can damage the front-end electronics or mimic detector signals. To ensure the correct performance, every high-voltage cable and feedthrough must be capable of supplying HPGe detector operating voltages as high as 5 kV without exhibiting discharge. R&D measurements were carried out to understand the testing system and determine the optimum design configuration of the high-voltage path, including different improvements of the cable layout and feedthrough flange model selection. Every cable and feedthrough to be used at the MAJORANA DEMONSTRATOR was characterized and the micro-discharge effects during the MAJORANA DEMONSTRATOR commissioning phase were studied. A stable configuration has been achieved, and the cables and connectors can supply HPGe detector operating voltages without exhibiting discharge.

  9. High voltage testing for the Majorana Demonstrator

    Energy Technology Data Exchange (ETDEWEB)

    Abgrall, N.; Arnquist, Isaac J.; Avignone, F. T.; Barabash, A.; Bertrand, F.; Bradley, A. W.; Brudanin, V.; Busch, Matthew; Buuck, M.; Byram, D.; Caldwell, A. S.; Chan, Yuen-Dat; Christofferson, C. D.; Chu, Pamela M.; Cuesta, C.; Detwiler, Jason A.; Doe, P. J.; Dunagan, C.; Efremenko, Yuri; Ejiri, H.; Elliott, S. R.; Fu, Z.; Galindo-Uribarri, A.; Giovanetti, G. K.; Goett, J.; Green, M. P.; Gruszko, J.; Guinn, I.; Guiseppe, V. E.; Henning, R.; Hoppe, Eric W.; Howard, S.; Howe, M. A.; Jasinski, B. R.; Keeter, K.; Kidd, M. F.; Konovalov, S.; Kouzes, Richard T.; Laferriere, Brian D.; Leon, Jonathan D.; Li, Alexander D.; MacMullin, J.; Martin, R. D.; Massarcyk, R.; Meijer, S. J.; Mertens, S.; Orrell, John L.; O' Shaughnessy, C.; Poon, Alan W.; Radford, D. C.; Rager, J.; Rielage, Keith; Robertson, R. G. H.; Romero Romo, M.; Shanks, B.; Shirchenko, M.; Snyder, N.; Suriano, Anne-Marie E.; Tedeschi, D.; Thompson, Andrew; Ton, K. T.; Trimble, J. E.; Varner, R. L.; Vasilyev, Sergey; Vetter, Kai; Vorren, Kris R.; White, Brandon R.; Wilkerson, J. F.; Wiseman, C.; Xu, W.; Yakushev, E.; Yu, Chang-Hong; Yumatov, V.

    2016-07-01

    The Majorana Collaboration is constructing theMajorana Demonstrator, an ultra-low background, 44-kg modular high-purity Ge (HPGe) detector array to search for neutrinoless double-beta decay in 76Ge. The phenomenon of surface micro-discharge induced by high-voltage has been studied in the context of theMajorana Demonstrator. This effect can damage the front-end electronics or mimic detector signals. To ensure the correct performance, every high-voltage cable and feedthrough must be capable of supplying HPGe detector operating voltages as high as 5 kV without exhibiting discharge. R&D measurements were carried out to understand the testing system and determine the optimum design configuration of the high-voltage path, including different improvements of the cable layout and feedthrough flange model selection. Every cable and feedthrough to be used at the Majorana Demonstrator was characterized and the micro-discharge effects during theMajorana Demonstrator commissioning phase were studied. A stable configuration has been achieved, and the cables and connectors can supply HPGe detector operating voltages without exhibiting discharge.

  10. High energy laser demonstrators for defense applications

    Science.gov (United States)

    Jung, M.; Riesbeck, Th.; Schmitz, J.; Baumgärtel, Th.; Ludewigt, K.; Graf, A.

    2017-01-01

    Rheinmetall Waffe Munition has worked since 30 years in the area of High Energy Laser (HEL) for defence applications, starting from pulsed CO2 to pulsed glass rods lasers. In the last decade Rheinmetall Waffe Munition changed to diode pumped solid state laser (DPSSL) technology and has successfully developed, realised and tested a variety of versatile HEL weapon demonstrators for air- and ground defence scenarios like countering rocket, artillery, mortar, missile (RAMM), unmanned aerial systems (UAS) and unexploded ordnances clearing. By employing beam superimposing technology and a modular laser weapon concept, the total optical power has been successively increased. Stationary weapon platforms, military vehicles and naval platforms have been equipped with high energy laser effectors. The contribution gives a summary of the most recent development stages of Rheinmetalls HEL weapon program. In addition to the stationary 30 kW laser weapon demonstrator, we present vehicle based HEL demonstrators: the 5 kW class Mobile HEL Effector Track V, the 20 kW class Mobile HEL Effector Wheel XX and the 50 kW class Mobile HEL Effector Container L and the latest 10 kW HEL effector integrated in the naval weapon platform MLG 27. We describe the capabilities of these demonstrators against different potential targets. Furthermore, we will show the capability of the 30 kW stationary Laser Weapon Demonstrator integrated into an existing ground based air defence system to defeat saturated attacks of RAMM and UAS targets.

  11. High dynamic GPS receiver validation demonstration

    Science.gov (United States)

    Hurd, W. J.; Statman, J. I.; Vilnrotter, V. A.

    1985-01-01

    The Validation Demonstration establishes that the high dynamic Global Positioning System (GPS) receiver concept developed at JPL meets the dynamic tracking requirements for range instrumentation of missiles and drones. It was demonstrated that the receiver can track the pseudorange and pseudorange rate of vehicles with acceleration in excess of 100 g and jerk in excess of 100 g/s, dynamics ten times more severe than specified for conventional High Dynamic GPS receivers. These results and analytic extensions to a complete system configuration establish that all range instrumentation requirements can be met. The receiver can be implemented in the 100 cu in volume required by all missiles and drones, and is ideally suited for transdigitizer or translator applications.

  12. High Throughput Bent-Pipe Processor Demonstrator

    Science.gov (United States)

    Tabacco, P.; Vernucci, A.; Russo, L.; Cangini, P.; Botticchio, T.; Angeletti, P.

    2008-08-01

    The work associated to this article is a study initiative sponsored by ESA/ESTEC that responds to the crucial need of developing new Satellite payload aimed at making rapid progresses in handling large amounts of data at a competitive price with respect to terrestrial one in the telecommunication field. Considering the quite limited band allowed to space communications at Ka band, reusing the same band in a large number of beams is mandatory: therefore beam-forming is the right technological answer. Technological progresses - mainly in the digital domain - also help greatly in increasing the satellite capacity. Next Satellite payload target are set in throughput range of 50Gbps. Despite the fact that the implementation of a wideband transparent processor for a high capacity communication payload is a very challenging task, Space Engineering team in the frame of this ESA study proposed an intermediate step of development for a scalable unit able to demonstrate both the capacity and flexibility objectives for different type of Wideband Beamforming antennas designs. To this aim the article describes the features of Wideband HW (analog and digital) platform purposely developed by Space Engineering in the frame of this ESA/ESTEC contract ("WDBFN" contract) with some preliminary system test results. The same platform and part of the associated SW will be used in the development and demonstration of the real payload digital front end Mux and Demux algorithms as well as the Beam Forming and on Board channel switching in frequency domain. At the time of this article writing, despite new FPGA and new ADC and DAC converters have become available as choices for wideband system implementation, the two HW platforms developed by Space Engineering, namely WDBFN ADC and DAC Boards, represent still the most performing units in terms of analog bandwidth, processing capability (in terms of FPGA module density), SERDES (SERiliazer DESerializers) external links density, integration form

  13. Demonstration of direct internal reforming for MCFC power plants

    Energy Technology Data Exchange (ETDEWEB)

    Aasberg-Petersen, K.; Christensen, P.S.; Winther, S.K. [HALDOR TOPSOE A/S, Lynby (Denmark)] [and others

    1996-12-31

    The conversion of methane into hydrogen for an MCFC by steam reforming is accomplished either externally or internally in the stack. In the case of external reforming the plant electrical efficiency is 5% abs. lower mainly because more parasitic power is required for air compression for stack cooling. Furthermore, heat produced in the stack must be transferred to the external reformer to drive the endothermic steam reforming reaction giving a more complex plant lay-out. A more suitable and cost effective approach is to use internal steam reforming of methane. Internal reforming may be accomplished either by Indirect Internal Reforming (DIR) and Direct Internal Reforming (DIR) in series or by DIR-only as illustrated. To avoid carbon formation in the anode compartment higher hydrocarbons in the feedstock are converted into hydrogen, methane and carbon oxides by reaction with steam in ail adiabatic prereformer upstream the fuel cell stack. This paper discusses key elements of the desire of both types of internal reforming and presents data from pilot plants with a combined total of more than 10,000 operating hours. The project is being carried out as part of the activities of the European MCFC Consortium ARGE.

  14. Highly Conducting Graphite Epoxy Composite Demonstrated

    Science.gov (United States)

    Gaier, James R.

    1999-01-01

    Weight savings as high as 80 percent could be achieved if graphite polymer composites could replace aluminum in structures such as electromagnetic interference shielding covers and grounding planes. This could result in significant cost savings, especially for the mobile electronics found in spacecraft, aircraft, automobiles, and hand-held consumer electronics. However, such composites had not yet been fabricated with conductivity sufficient to enable these applications. To address this lack, a partnership of the NASA Lewis Research Center, Manchester College, and Applied Sciences, Inc., fabricated nonmetallic composites with unprecedented electrical conductivity. For these composites, heat-treated, vapor-grown graphite fibers were selected which have a resistivity of about 80 mW-cm, more than 20 times more conductive than typical carbon fibers. These fibers were then intercalated with iodine bromide (IBr). Intercalation is the insertion of guest atoms or molecules between the carbon planes of the graphite fibers. Since the carbon planes are not highly distorted in the process, intercalation has little effect on mechanical and thermal properties. Intercalation does, however, lower the carbon fiber resistivity to less than 10 mW-cm, which is comparable to that of metal fibers. Scaleup of the reaction was required since the initial intercalation experiments would be carried out on 20-mg quantities of fibers, and tens of grams of intercalated fibers would be needed to fabricate even small demonstration composites. The reaction was first optimized through a time and temperature study that yielded fibers with a resistivity of 8.7 2 mW-cm when exposed to IBr vapor at 114 C for 24 hours. Stability studies indicated that the intercalated fibers rapidly lost their conductivity when exposed to temperatures as low as 40 C in air. They were not, however, susceptible to degradation by water vapor in the manner of most graphite intercalation compounds. The 1000-fold scaleup

  15. TAs on TV: Demonstrating Communication Strategies for International Teaching Assistants.

    Science.gov (United States)

    Douglas, Dan; Myers, Cindy

    1989-01-01

    Describes a technique for videotaping classroom performances of native and international teaching assistants (ITA) to teach ITAs about specific, definable English language skills, U.S. academic culture and pedagogical performance, and to help them develop communications strategies for coping with largely undefinable future communicative needs.…

  16. Refractive Secondary Solar Concentrator Demonstrated High-Temperature Operation

    Science.gov (United States)

    Wong, Wayne A.

    2002-01-01

    Space applications that utilize solar thermal energy--such as electric power conversion systems, thermal propulsion systems, and furnaces--require highly efficient solar concentration systems. The NASA Glenn Research Center is developing the refractive secondary concentrator, which uses refraction and total internal reflection to efficiently concentrate and direct solar energy. When used in combination with advanced lightweight primary concentrators, such as inflatable thin films, the refractive secondary concentrator enables very high system concentration ratios and very high temperatures. Last year, Glenn successfully demonstrated a secondary concentrator throughput efficiency of 87 percent, with a projected efficiency of 93 percent using an antireflective coating. Building on this achievement, Glenn recently successfully demonstrated high-temperature operation of the secondary concentrator when it was used to heat a rhenium receiver to 2330 F. The high-temperature demonstration of the concentrator was conducted in Glenn's 68-ft long Tank 6 thermal vacuum facility equipped with a solar simulator. The facility has a rigid panel primary concentrator that was used to concentrate the light from the solar simulator onto the refractive secondary concentrator. NASA Marshall Space Flight Center provided a rhenium cavity, part of a solar thermal propulsion engine, to serve as the high-temperature receiver. The prototype refractive secondary concentrator, measuring 3.5 in. in diameter and 11.2 in. long, is made of single-crystal sapphire. A water-cooled splash shield absorbs spillage light outside of the 3.5-in. concentrator aperture. Multilayer foil insulation composed of tungsten, molybdenum, and niobium is used to minimize heat loss from the hightemperature receiver. A liquid-cooled canister calorimeter is used to measure the heat loss through the multilayer foil insulation.

  17. Thermal performance demonstration of a prototype internally cooled nose tip/forebody/window assembly

    Science.gov (United States)

    Wojciechowski, Carl J.; Brooks, Lori C.; Teal, Gene; Karu, Zain; Kalin, David A.; Jones, Gregory W.; Romero, Harold

    1996-11-01

    Internally liquid cooled apertures (windows) installed in a full size forebody have been characterized under high heat flux conditions representative of endoatmospheric flight. Analysis and test data obtained in the laboratory and at arc heater test facilities at Arnold Engineering Development Center and NASA Ames are presented in this paper. Data for several types of laboratory bench tests are presented: transmission interferometry and imaging, coolant pressurization effects on optical quality, and coolant flow rate calibrations for both the window and other internally cooled components. Initially, using heat transfer calibration models identical in shape to the flight test articles, arc heater facility thermal test environments were obtained at several conditions representative of full flight thermal environments. Subsequent runs tested the full-up flight article including nosetip, forebody and aperture for full flight duplication of surface heating rates and exposure ties. Pretest analyses compared will to test measurements. These data demonstrate a very efficient internal liquid cooling design which can be applied to other applications such as cooled mirrors for high heat flux applications.

  18. Video- Demonstration of Seltzer Tablet in Water Onboard the International Space Station (ISS)

    Science.gov (United States)

    2002-01-01

    Saturday Morning Science, the science of opportunity series of applied experiments and demonstrations, performed aboard the International Space Station (ISS) by Expedition 6 astronaut Dr. Don Pettit, revealed some remarkable findings. In this video clip, Pettit demonstrates dropping an Alka Seltzer tablet into a film of water which becomes a floating ball of activity filled water. Watch the video to see the surprising results!

  19. Optical design and laser ablation of surface textures: demonstrating total internal reflection

    Science.gov (United States)

    Gommans, Hans; Booij, Silvia; Pijlman, Fetze; Krijn, Marcel; de Zwart, Siebe; Sepkhanov, Ruslan; Beaumont, Dave; van der Schaft, Hans; Sanders, Rene

    2015-09-01

    In lighting applications key drivers for optical design of surface textures are integration of optical elements, the disentanglement of optical functionality and appearance and late stage configuration. We investigated excimer laser ablation as a mastering technology for micro textured surfaces, where we targeted an increase in correspondence between surface design and ablated surface for high aspect ratio structures. To achieve this we have improved the photo mask design using a heuristic algorithm that corrects for the angular dependence of the ablation process and the loss of image resolution at ablation depths that exceed the depth of field. Using this approach we have been able to demonstrate close correspondence between designed and ablated facet structures up to 75° inclination at 75 μm depth. These facet design parameters allow for total internal reflection (TIR) as a means of beam deflection which is demonstrated in a range of mono shaped cone arrays in hexagonal tessellation. BSDF analysis was used to characterize the narrow TIR deflection beams that matched the peak positions of the design down to 28° apex. In addition, a single surface TIR-Fresnel lens design with focal distance 5 mm has been manufactured using this photo mask design algorithm and beam collimation up to 12° beam angle and 32° field angle is shown. These outcomes demonstrate that the laser ablation process intrinsically yields sufficient small dispersion in structure and fillet radii for lighting applications.

  20. Precision Information Environment (PIE) for International Safeguards: Pre-Demonstration Development Use Cases

    Energy Technology Data Exchange (ETDEWEB)

    Gastelum, Zoe N.; Henry, Michael J.

    2013-11-13

    In FY2013, the PIE International Safeguards team demonstrated our development progress to U.S. Department of Energy (DOE) staff from the Office of Nonproliferation and International Security (NA-24, our client) and the Office of Defense Nuclear Nonproliferation Research and Development (NA-22). Following the demonstration, the team was asked by our client to complete additional development prior to a planned demonstration at the International Atomic Energy Agency (IAEA), scheduled tentatively for January or spring of 2014. The team discussed four potential areas for development (in priority order), and will develop them as time and funding permit prior to an IAEA demonstration. The four capability areas are: 1. Addition of equipment manuals to PIE-accessible files 2. Optical character recognition (OCR) of photographed text 3. Barcode reader with information look-up from a database 4. Add Facilities to Data Model 5. Geospatial capabilities with information integration Each area will be described below in a use case.

  1. Demonstrating Experimenter "Ineptitude" as a Means of Teaching Internal and External Validity

    Science.gov (United States)

    Treadwell, Kimberli R.H.

    2008-01-01

    Internal and external validity are key concepts in understanding the scientific method and fostering critical thinking. This article describes a class demonstration of a "botched" experiment to teach validity to undergraduates. Psychology students (N = 75) completed assessments at the beginning of the semester, prior to and immediately following…

  2. Hardware demonstration of high-speed networks for satellite applications.

    Energy Technology Data Exchange (ETDEWEB)

    Donaldson, Jonathon W.; Lee, David S.

    2008-09-01

    This report documents the implementation results of a hardware demonstration utilizing the Serial RapidIO{trademark} and SpaceWire protocols that was funded by Sandia National Laboratories (SNL's) Laboratory Directed Research and Development (LDRD) office. This demonstration was one of the activities in the Modeling and Design of High-Speed Networks for Satellite Applications LDRD. This effort has demonstrated the transport of application layer packets across both RapidIO and SpaceWire networks to a common downlink destination using small topologies comprised of commercial-off-the-shelf and custom devices. The RapidFET and NEX-SRIO debug and verification tools were instrumental in the successful implementation of the RapidIO hardware demonstration. The SpaceWire hardware demonstration successfully demonstrated the transfer and routing of application data packets between multiple nodes and also was able reprogram remote nodes using configuration bitfiles transmitted over the network, a key feature proposed in node-based architectures (NBAs). Although a much larger network (at least 18 to 27 nodes) would be required to fully verify the design for use in a real-world application, this demonstration has shown that both RapidIO and SpaceWire are capable of routing application packets across a network to a common downlink node, illustrating their potential use in real-world NBAs.

  3. Experimental demonstration of vortex pancake in high temperature superconductor

    Institute of Scientific and Technical Information of China (English)

    WANG Wei-xian; ZHANG Yu-heng

    2006-01-01

    In order to demonstrate the existence of the vortex pancake in high temperature superconductor experimentally,a configuration in which the current and voltage electrodes lies separately on the top and bottom surface is used.The E-j relation obtained with this electrodes spatial configuration is different from the expected E-j behavior of the stiff vortex line model.Thus,the current results support the existence of the vortex pancake in high temperature superconductor.

  4. Demonstration of deterministic and high fidelity squeezing of quantum information

    DEFF Research Database (Denmark)

    Yoshikawa, J-I.; Hayashi, T-; Akiyama, T.

    2007-01-01

    By employing a recent proposal [R. Filip, P. Marek, and U.L. Andersen, Phys. Rev. A 71, 042308 (2005)] we experimentally demonstrate a universal, deterministic, and high-fidelity squeezing transformation of an optical field. It relies only on linear optics, homodyne detection, feedforward, and an...

  5. GATEWAY Demonstrations: Philadelphia International Airport Apron Lighting: LED System Performance in a Trial Installation

    Energy Technology Data Exchange (ETDEWEB)

    Davis, Robert G. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wilkerson, Andrea M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-10-30

    This report documents a trial installation of LED apron lighting that replaced the existing high-pressure sodium luminaires at Philadelphia International Airport. Such high-mast applications remain challenging for LED technology, and the lessons learned from this project may help facility managers and LED product manufacturers better meet those challenges.

  6. Optical Multi-Gas Monitor Technology Demonstration on the International Space Station

    Science.gov (United States)

    Pilgrim, Jeffrey S.; Wood, William R.; Casias, Miguel E.; Vakhtin, Andrei B.; Johnson, Michael D.; Mudgett, Paul D.

    2014-01-01

    The International Space Station (ISS) employs a suite of portable and permanently located gas monitors to insure crew health and safety. These sensors are tasked with functions ranging from fixed mass spectrometer based major constituents analysis to portable electrochemical sensor based combustion product monitoring. An all optical multigas sensor is being developed that can provide the specificity of a mass spectrometer with the portability of an electrochemical cell. The technology, developed under the Small Business Innovation Research program, allows for an architecture that is rugged, compact and low power. A four gas version called the Multi-Gas Monitor was launched to ISS in November 2013 aboard Soyuz and activated in February 2014. The portable instrument is comprised of a major constituents analyzer (water vapor, carbon dioxide, oxygen) and high dynamic range real-time ammonia sensor. All species are sensed inside the same enhanced path length optical cell with a separate vertical cavity surface emitting laser (VCSEL) targeted at each species. The prototype is controlled digitally with a field-programmable gate array/microcontroller architecture. The optical and electronic approaches are designed for scalability and future versions could add three important acid gases and carbon monoxide combustion product gases to the four species already sensed. Results obtained to date from the technology demonstration on ISS are presented and discussed.

  7. Laser beaming demonstrations to high-orbit satellites

    Science.gov (United States)

    Lipinski, Ronald J.; Meister, Dorothy C.; Tucker, Steve D.; Fugate, Robert Q.; Leatherman, Phillip; Maes, Carl F.; Lange, W. Joseph; Cowan, William D.; Meulenberg, Andrew; Cleis, Richard A.; Spinhirne, James M.; Ruane, Raymond E.; Michie, Robert B.; Vonderhaar, Donald F.

    1994-05-01

    A team of Phillips Laboratory, COMSAT Laboratories, and Sandia National Laboratories plans to demonstrate state-of-the-art laser-beaming demonstrations to high-orbit satellites. The demonstrations will utilize the 1.5-m diameter telescope with adaptive optics at the AFPL Starfire Optical Range (SOR) and a ruby laser provided by the Air Force and Sandia (1 - 50 kW and 6 ms at 694.3 nm). The first targets will be corner-cube retro-reflectors left on the moon by the Apollo 11, 14, and 15 landings. We attempt to use adaptive optics for atmospheric compensation to demonstrate accurate and reliable beam projection with a series of shots over a span of time and shot angle. We utilize the return signal from the retro- reflectors to help determine the beam diameter on the moon and the variations in pointing accuracy caused by atmospheric tilt. This is especially challenging because the retro-reflectors need to be in the lunar shadow to allow detection over background light. If the results from this experiment are encouraging, we will at a later date direct the beam at a COMSAT satellite in geosynchronous orbit as it goes into the shadow of the earth. We utilize an onboard monitor to measure the current generated in the solar panels on the satellite while the beam is present. A threshold irradiance of about 4 W/m2 on orbit is needed for this demonstration.

  8. LIQUIDARMOR CM Flashing and Sealant, High Impact Technology Demonstration

    Energy Technology Data Exchange (ETDEWEB)

    Hun, Diana E [ORNL; Bhandari, Mahabir S [ORNL

    2016-12-01

    Air leakage is responsible for about 1.1 quads of energy or 6% of the total energy used by commercial buildings in the US. Consequently, infiltration and exfiltration are among the largest envelope-related contributors to the heating, ventilation, and air conditioning loads in commercial buildings. New air sealing technologies have recently emerged that aim to improve the performance of air barrier systems by simplifying their installation procedure. LIQUIDARMORTM CM Flashing and Sealant is an example of these new advanced material technologies. This technology is a spray-applied sealant and liquid flashing and can span gaps that are up to ¼ in. wide without a supporting material. ORNL verified the performance of LIQUIDARMORTM CM with field tests and energy simulations from a building in which LIQUIDARMORTM CM was one of components of the air barrier system. The Homeland Security Training Center (HTC) at the College of DuPage in Glen Ellyn, IL, served as the demonstration site. Blower door test results show the average air leakage rate in the demonstration site to be 0.15 cfm/ft2 at 1.57 psf, or 63% lower than the 0.4 cfm at 1.57 psf specified in the 2015 International Energy Conservation Code (IECC). According to simulation results, HTC lowered its annual heating and cooling cost by about $3,000 or 9% compared to a similar building that lacked an air barrier system. This demonstration project serves as an example of the level of building envelope airtightness that can be achieved by using air barrier materials that are properly installed, and illustrates the energy and financial savings that such an airtight envelope could attain.

  9. High-Level Dialogue on International Migration

    Directory of Open Access Journals (Sweden)

    UNHCR

    2006-08-01

    Full Text Available UNHCR wishes to bring the following observations andrecommendations to the attention of the High-LevelDialogue (HLD on International Migration and Development,to be held in New York, 14-15 September 2006:

  10. STARS A Two Stage High Gain Harmonic Generation FEL Demonstrator

    Energy Technology Data Exchange (ETDEWEB)

    M. Abo-Bakr; W. Anders; J. Bahrdt; P. Budz; K.B. Buerkmann-Gehrlein; O. Dressler; H.A. Duerr; V. Duerr; W. Eberhardt; S. Eisebitt; J. Feikes; R. Follath; A. Gaupp; R. Goergen; K. Goldammer; S.C. Hessler; K. Holldack; E. Jaeschke; Thorsten Kamps; S. Klauke; J. Knobloch; O. Kugeler; B.C. Kuske; P. Kuske; A. Meseck; R. Mitzner; R. Mueller; M. Neeb; A. Neumann; K. Ott; D. Pfluckhahn; T. Quast; M. Scheer; Th. Schroeter; M. Schuster; F. Senf; G. Wuestefeld; D. Kramer; Frank Marhauser

    2007-08-01

    BESSY is proposing a demonstration facility, called STARS, for a two-stage high-gain harmonic generation free electron laser (HGHG FEL). STARS is planned for lasing in the wavelength range 40 to 70 nm, requiring a beam energy of 325 MeV. The facility consists of a normal conducting gun, three superconducting TESLA-type acceleration modules modified for CW operation, a single stage bunch compressor and finally a two-stage HGHG cascaded FEL. This paper describes the faciliy layout and the rationale behind the operation parameters.

  11. High Input Voltage, Silicon Carbide Power Processing Unit Performance Demonstration

    Science.gov (United States)

    Bozak, Karin E.; Pinero, Luis R.; Scheidegger, Robert J.; Aulisio, Michael V.; Gonzalez, Marcelo C.; Birchenough, Arthur G.

    2015-01-01

    A silicon carbide brassboard power processing unit has been developed by the NASA Glenn Research Center in Cleveland, Ohio. The power processing unit operates from two sources: a nominal 300 Volt high voltage input bus and a nominal 28 Volt low voltage input bus. The design of the power processing unit includes four low voltage, low power auxiliary supplies, and two parallel 7.5 kilowatt (kW) discharge power supplies that are capable of providing up to 15 kilowatts of total power at 300 to 500 Volts (V) to the thruster. Additionally, the unit contains a housekeeping supply, high voltage input filter, low voltage input filter, and master control board, such that the complete brassboard unit is capable of operating a 12.5 kilowatt Hall effect thruster. The performance of the unit was characterized under both ambient and thermal vacuum test conditions, and the results demonstrate exceptional performance with full power efficiencies exceeding 97%. The unit was also tested with a 12.5kW Hall effect thruster to verify compatibility and output filter specifications. With space-qualified silicon carbide or similar high voltage, high efficiency power devices, this would provide a design solution to address the need for high power electric propulsion systems.

  12. High-Temperature Gas Sensor Array (Electronic Nose) Demonstrated

    Science.gov (United States)

    Hunter, Gary W.

    2002-01-01

    The ability to measure emissions from aeronautic engines and in commercial applications such as automotive emission control and chemical process monitoring is a necessary first step if one is going to actively control those emissions. One single sensor will not give all the information necessary to determine the chemical composition of a high-temperature, harsh environment. Rather, an array of gas sensor arrays--in effect, a high-temperature electronic "nose"--is necessary to characterize the chemical constituents of a diverse, high-temperature environment, such as an emissions stream. The signals produced by this nose could be analyzed to determine the constituents of the emission stream. Although commercial electronic noses for near-room temperature applications exist, they often depend significantly on lower temperature materials or only one sensor type. A separate development effort necessary for a high-temperature electronic nose is being undertaken by the NASA Glenn Research Center, Case Western Reserve University, Ohio State University, and Makel Engineering, Inc. The sensors are specially designed for hightemperature environments. A first-generation high-temperature electronic nose has been demonstrated on a modified automotive engine. This nose sensor array was composed of sensors designed for hightemperature environments fabricated using microelectromechanical-systems- (MEMS-) based technology. The array included a tin-oxide-based sensor doped for nitrogen oxide (NOx) sensitivity, a SiC-based hydrocarbon (CxHy) sensor, and an oxygen sensor (O2). These sensors operate on different principles--resistor, diode, and electrochemical cell, respectively--and each sensor has very different responses to the individual gases in the environment. A picture showing the sensor head for the array is shown in the photograph on the left and the sensors installed in the engine are shown in the photograph on the right. Electronics are interfaced with the sensors for

  13. Low Temperature Combustion Demonstrator for High Efficiency Clean Combustion

    Energy Technology Data Exchange (ETDEWEB)

    Ojeda, William de

    2010-07-31

    The project which extended from November 2005 to May of 2010 demonstrated the application of Low Temperature Combustion (LTC) with engine out NOx levels of 0.2 g/bhp-hr throughout the program target load of 12.6bar BMEP. The project showed that the range of loads could be extended to 16.5bar BMEP, therefore matching the reference lug line of the base 2007 MY Navistar 6.4L V8 engine. Results showed that the application of LTC provided a dramatic improvement over engine out emissions when compared to the base engine. Furthermore LTC improved thermal efficiency by over 5% from the base production engine when using the steady state 13 mode composite test as a benchmark. The key enablers included improvements in the air, fuel injection, and cooling systems made in Phases I and II. The outcome was the product of a careful integration of each component under an intelligent control system. The engine hardware provided the conditions to support LTC and the controller provided the necessary robustness for a stable combustion. Phase III provided a detailed account on the injection strategy used to meet the high load requirements. During this phase, the control strategy was implemented in a production automotive grade ECU to perform cycle-by-cycle combustion feedback on each of the engine cylinders. The control interacted on a cycle base with the injection system and with the Turbo-EGR systems according to their respective time constants. The result was a unique system that could, first, help optimize the combustion system and maintain high efficiency, and secondly, extend the steady state results to the transient mode of operation. The engine was upgraded in Phase IV with a Variable Valve Actuation system and a hybrid EGR loop. The impact of the more versatile EGR loop did not provide significant advantages, however the application of VVA proved to be an enabler to further extend the operation of LTC and gain considerable benefits in fuel economy and soot reduction. Finally

  14. The Demonstration of a Robotic External Leak Locator on the International Space Station

    Science.gov (United States)

    Naids, Adam; Rossetti, Dino; Bond, Tim; Johnson, Brien; Huang, Alvin; Deal, Alexandra; Fox, Katie; Heiser, Michael; Hartman, William; Mikatarian, Ronald

    2017-01-01

    The International Space Station (ISS) and all currently conceivable future manned spacecraft are susceptible to mission impacts due to fluid/gas leaks to the exterior environment. For example, there is a well-known risk of ammonia leaks from the ISS External Thermal Control System loops and currently no method to locate them. It was, therefore, critical to develop a method for detecting and locating leaks to preserve vehicle health. The Robotic External Leak Locator (RELL) was developed and deployed to the ISS to provide this capability. An on-orbit validation and demonstration was successfully completed in December 2016 and leak locating operations occurred in February 2017. This paper discusses the results of those exercises including measurements of the environment around ISS, detection of the small ammonia leak and implementation of leak locating methodologies.

  15. Development of derived investigation levels for use in internal dosimetry at the West Valley Demonstration Project

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, P. [Pittsburgh Univ., PA (United States)

    1991-12-31

    The objective was to determine if the routine intemal dosimetry program at the West Valley Demonstration Project is capable of meeting the performance objective of 1 mSv annual effective dose equivalent due to internal contamination. With the use of the computer code REMedy the annual effective dose equivalent is calculated. Some of the radionuclides of concern result in an annual effective dose equivalent that exceeds the performance objective. Although the results exceed the performance objective, in all but two cases they do not exceed the US DOE regulatory limits. In these instances the Th-232 and Am-241 were determined to exceed the committed dose equivalent limit to their limiting tissue. In order to document the potential missed dose for regulatory compliance, Sr-90 is used as an indicator for Th-232. For Am-241 an investigation as to whether or not the minimum detectable amount can be lowered is performed. The derived investigation levels as a result of this project are 4.9E3 Bq/lung count for Co-60, 2.2E4 Bq/lung count for Cs-137, 1.9 Bq/1 for Sr-90 and for radionuclides other than Sr-90 any value greater than or equal to three standard deviations above their net count is considered to require further investigation.

  16. Plasma etching and ashing: a technique for demonstrating internal structures of helminths using scanning electron microscopy.

    Science.gov (United States)

    Veltkamp, C J; Chubb, J C

    2006-03-01

    Plasma etching and ashing for demonstrating the three-dimensional ultrastructure of the internal organs of helminths is described. Adult worms of the cestode Caryophyllaeides fennica were dehydrated through an ethanol series, critical point dried (Polaron E3000) and sputter coated with 60% gold-palladium (Polaron E5100) and glued to a standard scanning electron microscope (SEM) stub positioned as required for ashing. After initial SEM viewing of worm surfaces for orientation, stubs were placed individually in the reactor chamber of a PT7150 plasma etching and ashing machine. Worms were exposed to a radio frequency (RF) potential in a low pressure (0.2 mbar) oxygen atmosphere at room temperature. The oxidation process was controlled by varying the times of exposure to the RF potential between 2 to 30 min, depending on the depth of surface tissue to be removed to expose target organs or tissues. After each exposure the oxidized layer was blown from the surface with compressed air, the specimen sputter-coated, and viewed by SEM. The procedure was repeated as necessary, to progressively expose successive layers. Fine details of organs, cells within, and cell contents were revealed. Ashing has the advantage of providing three dimensional images of the arrangement of organs that are impossible to visualize by any other procedure, for example facilitating testes counts in cestodes. Both freshly-fixed and long-term stored helminths can be ashed. Ashing times to obtain the desired results were determined by trial so that some duplicate material was needed.

  17. Democritos: preparing demonstrators for high power nuclear electric space propulsion

    OpenAIRE

    Masson, Frederic; Ruault, Jean-Marc; WORMS, Jean-Claude; Detsis, Emmanouil; Beaurain, André; Lassoudiere, Francois; Gaia, Enrico; Tosi, Maria -Christina; Jansen, Frank; Bauer, Waldemar; Semenkin, Alexander; Tinsley, Tim; Hodgson, Zara

    2015-01-01

    The Democritos project aims at preparing demonstrators for a megawatt class nuclearelectric space propulsion. It is funded by Horizon 2020, the R&T program of the European Community. It is a new European and Russian project, including as partners: Nuclear National Laboratory (U.K.), DLR (Germany), The Keldysh Research Center (Russia), Thales Alenia Space Italia (Italy), Snecma (France), ESF (France) and CNES (France). IEAV (Brazil) will join as an observer. Democritos is the follo...

  18. WIAMan Technology Demonstrator Sensor Codes Conforming to International Organization for Standardization/Technical Standard (ISO/TS) 13499

    Science.gov (United States)

    2016-03-01

    Standardization/Technical Standard ( ISO /TS) 13499 by Michael Tegtmeyer Approved for public release; distribution is unlimited. NOTICES Disclaimers The findings...International Organization for Standardization/Technical Standard ( ISO /TS) 13499 by Michael TegtmeyerWIAMan Engineering Office, ARL Approved for public...WIAMan Technology Demonstrator Sensor Codes Conforming to International Organization for Standardization/Technical Standard ( ISO /TS) 13499 Michael

  19. Optical Verification Laboratory Demonstration System for High Security Identification Cards

    Science.gov (United States)

    Javidi, Bahram

    1997-01-01

    Document fraud including unauthorized duplication of identification cards and credit cards is a serious problem facing the government, banks, businesses, and consumers. In addition, counterfeit products such as computer chips, and compact discs, are arriving on our shores in great numbers. With the rapid advances in computers, CCD technology, image processing hardware and software, printers, scanners, and copiers, it is becoming increasingly easy to reproduce pictures, logos, symbols, paper currency, or patterns. These problems have stimulated an interest in research, development and publications in security technology. Some ID cards, credit cards and passports currently use holograms as a security measure to thwart copying. The holograms are inspected by the human eye. In theory, the hologram cannot be reproduced by an unauthorized person using commercially-available optical components; in practice, however, technology has advanced to the point where the holographic image can be acquired from a credit card-photographed or captured with by a CCD camera-and a new hologram synthesized using commercially-available optical components or hologram-producing equipment. Therefore, a pattern that can be read by a conventional light source and a CCD camera can be reproduced. An optical security and anti-copying device that provides significant security improvements over existing security technology was demonstrated. The system can be applied for security verification of credit cards, passports, and other IDs so that they cannot easily be reproduced. We have used a new scheme of complex phase/amplitude patterns that cannot be seen and cannot be copied by an intensity-sensitive detector such as a CCD camera. A random phase mask is bonded to a primary identification pattern which could also be phase encoded. The pattern could be a fingerprint, a picture of a face, or a signature. The proposed optical processing device is designed to identify both the random phase mask and the

  20. High Gradient $Nb_3Sn$ Quadrupole Demonstrator MKQXF Engineering Design

    CERN Document Server

    Kokkinos, C; Karppinen, Mikko; CERN. Geneva. ATS Department

    2016-01-01

    A new mechanical design concept for the $Nb_3Sn$ quadrupoles has been developed with a goal of an accelerator quality magnet that can be industrially produced in large series. This concept can easily be extended to any length and applied on both 1-in-1 and 2-in-1 configurations. It is based on the pole-loading concept and collared coils using dipole-type collars. Detailed design optimisation of a demonstrator magnet based on present base-line HL-LHC IR quadrupole QXF coil geometry has been carried out including the end regions. This report describes the design concept and the fully parametric multi-physics finite element (FE) models that were used to determine the optimal assembly parameters including the effects of the manufacturing tolerances.

  1. Promoting Health Behaviors Using Peer Education: A Demonstration Project between International and American College Students

    Science.gov (United States)

    Yan, Zi; Finn, Kevin; Cardinal, Bradley J.; Bent, Lauren

    2014-01-01

    Background: Peer education has the potential to promote health behaviors and cultural competence for both international and domestic college students. Purpose: The present study examined a peer education program aimed at promoting cultural competence and health behaviors among international and American students in a university setting. Methods:…

  2. SITE PROGRAM DEMONSTRATION ECO LOGIC INTERNATIONAL GAS-PHASE CHEMICAL REDUCTION PROCESS, BAY CITY, MICHIGAN TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    The SITE Program funded a field demonstration to evaluate the Eco Logic Gas-Phase Chemical Reduction Process developed by ELI Eco Logic International Inc. (ELI), Ontario, Canada. The Demonstration took place at the Middleground Landfill in Bay City, Michigan using landfill wa...

  3. Demonstration of a high repetition rate capillary discharge waveguide

    Energy Technology Data Exchange (ETDEWEB)

    Gonsalves, A. J., E-mail: ajgonsalves@lbl.gov; Pieronek, C.; Daniels, J.; Bulanov, S. S.; Waldron, W. L.; Mittelberger, D. E.; Leemans, W. P. [Lawrence Berkeley National Laboratory, Berkeley, California 94720 (United States); Liu, F.; Antipov, S.; Butler, J. E. [Euclid TechLabs, Gaithersburg, Maryland 20879 (United States); Bobrova, N. A.; Sasorov, P. V. [Keldysh Institute of Applied Mathematics, Moscow (Russian Federation)

    2016-01-21

    A hydrogen-filled capillary discharge waveguide operating at kHz repetition rates is presented for parameters relevant to laser plasma acceleration (LPA). The discharge current pulse was optimized for erosion mitigation with laser guiding experiments and MHD simulation. Heat flow simulations and measurements showed modest temperature rise at the capillary wall due to the average heat load at kHz repetition rates with water-cooled capillaries, which is promising for applications of LPAs such as high average power radiation sources.

  4. Demonstration of novel, secure, real-time, portable ultrasound transmission from an austere international location.

    Science.gov (United States)

    Ogedegbe, Chinwe; Morchel, Herman; Hazelwood, Vikki; Hassler, Cynthia; Feldman, Joseph

    2012-01-01

    There is not sufficient access to medical care or medical expertise in many parts of the world. An innovative telemedicine system has been developed to provide expert medical guidance to field caregivers [who have less medical expertise but can reach the patient population in need]. Real-time ultrasound video images have been securely transmitted from the Dominican Republic to Hackensack University Medical Center, Hackensack NJ (HackensackUMC), while the expert physician at HackensackUMC maintained direct voice communication with the field caregiver. Utilizing a portable ultrasound machine (Sonosite) integrated with portable broadcasting device (LiveU), extended Focused Assessment Sonography in Trauma (e-FAST) examinations were performed on healthy volunteers and transmitted via the local cellular network. Additionally, two e-FAST examinations were conducted from a remote location without cellular coverage and transmitted via broad ground area network (BGAN) satellites. The demonstration took the technology "out of the lab" and into a real life, austere environment. The conditions of the Dominican Republic ultrasound mission provided experience on how to manage and utilize this innovative technology in areas where reliable communications and medical coverage are not readily available. The resilient transmission capabilities coupled with the security features deem this portable Telesonography (TS) equipment highly useful in the telemedicine forefront by offering healthcare in underdeveloped areas as well as potentially enhancing throughput in disaster situations.

  5. EPA SITE DEMONSTRATION OF THE INTERNATIONAL WASTE TECHNOLOGIES/GEO-CON IN SITU STABILIZATION/ SOLIDIFICATION PROCESS

    Science.gov (United States)

    This paper presents an EPA evaluation of the first field demonstration of an in situ stabilization/solidification process for contaminated soil under the EPA Superfund Innovative Technology Evaluation (SITE) program. Demonstration of this process was a joint effort of two vendors...

  6. Amendments to the Tlatelolco treaty 1990-1992: a demonstration of international collaboration

    Energy Technology Data Exchange (ETDEWEB)

    Vez, L.; Anaya, R. [Instituto Nacional de Energia Nuclear, Mexico City (Mexico)

    1995-12-31

    The amendments to the Tlatelolco treaty made between 1990-1992, had a major impact on its full enforcement. The paper will analyze the different process for its achievement and their consequences. The first and second amendments were made with the intention of including the Caribbean Countries within the geographical scope of the Treaty; and the third and most important one dealt with the adaptation of the control system foreseen in the Tlatelolco Treaty, to permit the integration of Argentina, Brazil and Chile to it. This work also quotes some facts that implied international collaboration in achieving the complete military denuclearization of Latin America and the Caribbean. (author). 25 refs.

  7. Demonstration of Pelvic Anatomy by Modified Midline Transection that Maintains Intact Internal Pelvic Organs

    Science.gov (United States)

    Steinke, Hanno; Saito, Toshiyuki; Herrmann, Gudrun; Miyaki, Takayoshi; Hammer, Niels; Sandrock, Mara; Itoh, Masahiro; Spanel-Borowski, Katharina

    2010-01-01

    Gross dissection for demonstrating anatomy of the human pelvis has traditionally involved one of two approaches, each with advantages and disadvantages. Classic hemisection in the median plane through the pelvic ring transects the visceral organs but maintains two symmetric pelvic halves. An alternative paramedial transection compromises one side…

  8. An innovative demonstration of high power density in a compact MDH (magnetohydrodynamic) generator

    Science.gov (United States)

    Schmidt, H. J.; Lineberry, J. T.; Chapman, J. N.

    1990-06-01

    The present program was conducted by the University of Tennessee Space Institute (UTSI). It was by its nature a high risk experimental program to demonstrate the feasibility of high power density operation in a laboratory scale combustion driven MHD generator. Maximization of specific energy was not a consideration for the present program, but the results have implications in this regard by virtue of high energy fuel used. The power density is the ratio of the electrical energy output to the internal volume of the generator channel. The MHD process is a volumetric process and the power density is therefore a direct measure of the compactness of the system. Specific energy, is the ratio of the electrical energy output to consumable energy used for its production. The two parameters are conceptually interrelated. To achieve high power density and implied commensurate low system volume and weight, it was necessary to use an energetic fuel. The high energy fuel of choice was a mixture of powdered aluminum and carbon seeded with potassium carbonate and burned with gaseous oxygen. The solid fuel was burned in a hybrid combustion scheme wherein the fuel was cast within a cylindrical combustor in analogy with a solid propellant rocket motor. Experimental data is limited to gross channel output current and voltage, magnetic field strength, fuel and oxidizer flow rates, flow train external temperatures and combustor pressure. Similarly, while instantaneous oxidizer flow rates were measured, only average fuel consumption based on pre and post test component weights and dimensions was possible.

  9. High performance internal reforming unit for high temperature fuel cells

    Science.gov (United States)

    Ma, Zhiwen; Venkataraman, Ramakrishnan; Novacco, Lawrence J.

    2008-10-07

    A fuel reformer having an enclosure with first and second opposing surfaces, a sidewall connecting the first and second opposing surfaces and an inlet port and an outlet port in the sidewall. A plate assembly supporting a catalyst and baffles are also disposed in the enclosure. A main baffle extends into the enclosure from a point of the sidewall between the inlet and outlet ports. The main baffle cooperates with the enclosure and the plate assembly to establish a path for the flow of fuel gas through the reformer from the inlet port to the outlet port. At least a first directing baffle extends in the enclosure from one of the sidewall and the main baffle and cooperates with the plate assembly and the enclosure to alter the gas flow path. Desired graded catalyst loading pattern has been defined for optimized thermal management for the internal reforming high temperature fuel cells so as to achieve high cell performance.

  10. Raven: An On-Orbit Relative Navigation Demonstration Using International Space Station Visiting Vehicles

    Science.gov (United States)

    Strube, Matthew; Henry, Ross; Skeleton, Eugene; Eepoel, John Van; Gill, Nat; McKenna, Reed

    2015-01-01

    Since the last Hubble Servicing Mission five years ago, the Satellite Servicing Capabilities Office (SSCO) at the NASA Goddard Space Flight Center (GSFC) has been focusing on maturing the technologies necessary to robotically service orbiting legacy assets-spacecraft not necessarily designed for in-flight service. Raven, SSCO's next orbital experiment to the International Space Station (ISS), is a real-time autonomous non-cooperative relative navigation system that will mature the estimation algorithms required for rendezvous and proximity operations for a satellite-servicing mission. Raven will fly as a hosted payload as part of the Space Test Program's STP-H5 mission, which will be mounted on an external ExPRESS Logistics Carrier (ELC) and will image the many visiting vehicles arriving and departing from the ISS as targets for observation. Raven will host multiple sensors: a visible camera with a variable field of view lens, a long-wave infrared camera, and a short-wave flash lidar. This sensor suite can be pointed via a two-axis gimbal to provide a wide field of regard to track the visiting vehicles as they make their approach. Various real-time vision processing algorithms will produce range, bearing, and six degree of freedom pose measurements that will be processed in a relative navigation filter to produce an optimal relative state estimate. In this overview paper, we will cover top-level requirements, experimental concept of operations, system design, and the status of Raven integration and test activities.

  11. International test and demonstration of a 1-MW wellhead generator: Helical screw expander power plant

    Science.gov (United States)

    McKay, R. A.

    1984-06-01

    A 1-MW wellhead generator was tested in 1980, 1981, and 1982 by Mexico, Italy, and New Zealand at Cerro Prieto, Cesano, and Broadlands, respectively. The total flow helical screw expander portable power plant, Model 76-1, had been built for the U.S. Government and field-tested in Utah, USA, in 1978 and 1979. The expander had oversized internal clearances designed for self-cleaning operation on fluids that deposit adherent scale normally detrimental to the utiliation of liquid dominated fields. Conditions with which the expander was tested included inlet pressures of 64 to 220 psia, inlet qualities of 0% to 100%, exhaust pressures of 3.1 to 40 psia, electrial loads of idle and 110 to 933 kW, electrical frequencies of 50 and 60 Hz, male rotor speeds of 2500 to 4000 rpm, and fluid characteristics to 310,000 ppm total dissolved solids and noncondensables to 38 wt % of the vapor. Some testing was done on-grid. Typical expander isentropic efficiency was 40% to 50% with the clearances not closed, and 5 percentage points or more higher with the clearances partly closed. The expander efficiency increased approximately logarithmically with shaft power for most operations, while inlet quality, speed, and pressure ratio across the machine had only small effects. These findings are all in agreement with the Utah test results.

  12. ANITA: The European Technology Demonstrator for Trace Gas Monitoring in the International Space Station Atmosphere

    Science.gov (United States)

    Tan, Gijsbert; Mosebach, Herbert; Honne, Atle

    2005-12-01

    The accumulation of toxic or otherwise harmful trace gases in a spacecraft cabin is a very serious concern in terms of health and safety of the crew. Much progress has been made in developing techniques for monitoring the air quality on board and in near-real-time. The technique developed in Europe has reached the state of an in-flight technology demonstrator. ANITA (Analysing Interferometer for Ambient Air) is based on FTIR (Fourier Transform Infra-Red) Spectrometry. ANITA is calibrated to identify and quantify quasi online more than 30 contaminants at low ppm (part per million) or sub-ppm detection limits.ANITA is a European Space Agency (ESA) - National Aeronautics and Space Administration (NASA) cooperative programme.ANITA will be launched with Jules Verne, the maiden flight of the Automatic Transfer Vehicle (ATV) currently scheduled for June 2007.

  13. An innovative demonstration of high power density in a compact MHD (magnetohydrodynamic) generator

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, H.J.; Lineberry, J.T.; Chapman, J.N.

    1990-06-01

    The present program was conducted by the University of Tennessee Space Institute (UTSI). It was by its nature a high risk experimental program to demonstrate the feasibility of high power density operation in a laboratory scale combustion driven MHD generator. Maximization of specific energy was not a consideration for the present program, but the results have implications in this regard by virtue of high energy fuel used. The power density is the ratio of the electrical energy output to the internal volume of the generator channel. The MHD process is a volumetric process and the power density is therefore a direct measure of the compactness of the system. Specific energy, is the ratio of the electrical energy output to consumable energy used for its production. The two parameters are conceptually interrelated. To achieve high power density and implied commensurate low system volume and weight, it was necessary to use an energetic fuel. The high energy fuel of choice was a mixture of powdered aluminum and carbon seeded with potassium carbonate and burned with gaseous oxygen. The solid fuel was burned in a hybrid combustion scheme wherein the fuel was cast within a cylindrical combustor in analogy with a solid propellant rocket motor. Experimental data is limited to gross channel output current and voltage, magnetic field strength, fuel and oxidizer flow rates, flow train external temperatures and combustor pressure. Similarly, while instantaneous oxidizer flow rates were measured, only average fuel consumption based on pre and post test component weights and dimensions was possible. 4 refs., 60 figs., 9 tabs.

  14. Appropriate small dam management for minimizing catchment-wide safety threats: International benchmarked guidelines and demonstrative cases studies

    Science.gov (United States)

    Pisaniello, John D.; Tingey-Holyoak, Joanne; Burritt, Roger L.

    2012-01-01

    Small dam safety is generally being ignored. The potential for dam failure resulting in catastrophic consequences for downstream communities, property, and the environment, warrants exploration of the threats and policy issues associated with the management of small/farm dams. The paper achieves this through a comparative analysis of differing levels of dam safety assurance policy: absent, driven, strong, and model. A strategic review is undertaken to establish international dam safety policy benchmarks and to identify a best practice model. A cost-effective engineering/accounting tool is presented to assist the policy selection process and complement the best practice model. The paper then demonstrates the significance of the small-dam safety problem with a case study of four Australian States,policy-absent South Australia, policy-driven Victoria, policy-strong New South Wales, and policy-modelTasmania. Surveys of farmer behavior practices provide empirical evidence of the importance of policy and its proper implementation. Both individual and cumulative farm dam failure threats are addressed and, with supporting empirical evidence, the need for "appropriate" supervision of small dams is demonstrated. The paper adds to the existing international dam policy literature by identifying acceptable minimum level practice in private/farm dam safety assurance policy as well as updated international best practice policy guidelines while providing case study demonstration of how to apply the guidelines and empirical reinforcement of the need for "appropriate" policy. The policy guidelines, cost-effective technology, and comparative lessons presented can assist any jurisdiction to determine and implement appropriate dam safety policy.

  15. Hall Effect Thruster for High Power Solar Electric Propulsion Technology Demonstration Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Busek proposes to develop a flight version of a high power Hall Effect thruster. While numerous high power Hall Effect thrusters have been demonstrated in the...

  16. High Technology and International Labour Markets.

    Science.gov (United States)

    Carnoy, Martin

    1985-01-01

    The author examines the impact of "high-tech" industries on labor markets, the division of labor and the organization of work, and the policy options open to societies for dealing with the effects. (CT)

  17. High temperature structural, polymeric foams from high internal emulsion polymerization

    Energy Technology Data Exchange (ETDEWEB)

    Hoisington, M.A.; Duke, J.R.; Apen, P.G.

    1996-02-01

    In 1982, a high internal phase emulsion (HIPE) polymerization process to manufacture microcellular, polymeric foam systems was patented by Unilever. This patent discloses a polymerization process that occurs in a water-in-oil emulsion in which the water represents at least 76% of the emulsion by volume. The oil phase consists of vinyl monomers such as styrene and acrylates that are crosslinked by divinyl monomers during polymerization. After polymerization and drying to remove the water phase, the result is a crosslinked polymer foam with an open cell microstructure that is homogeneous throughout in terms of morphology, density, and mechanical properties. Since 1982, numerous patents have examined various HIPE polymerized foam processing techniques and applications that include absorbents for body fluids, cleaning materials, and ion exchange systems. All the published HIPE polymerized foams have concentrated on materials for low temperature applications. Copolymerization of styrene with maleic anhydride and N-substituted maleimides to produce heat resistant thermoplastics has been studied extensively. These investigations have shown that styrene will free radically copolymerize with N-substituted maleimides to create an alternating thermoplastic copolymer with a Tg of approximately 200{degrees}C. However, there are many difficulties in attempting the maleimide styrene copolymerization in a HIPE such as lower polymerization temperatures, maleimide solubility difficulties in both styrene and water, and difficulty obtaining a stable HIPE with a styrene/maleimide oil phase. This work describes the preparation of copolymer foams from N-ethylmaleimide and Bis(3-ethyl-5-methyl-4-maleimide-phenyl)methane with styrene based monomers and crosslinking agents.

  18. Demonstration Program for Low-Cost, High-Energy-Saving Dynamic Windows

    Science.gov (United States)

    2014-09-01

    Design The scope of this project was to demonstrate the impact of dynamic windows via energy savings and HVAC peak-load reduction; to validate the...dominated by the internal thermal loads of office equipment (example AC 7) so the HVAC energy savings are lower in those zones. Figure 8. Plot...of daily HVAC energy consumption in four representative zones, before and after dynamic windows retrofit. Overall, energy savings in all eastern

  19. Case Study: International High School at Langley Park

    Science.gov (United States)

    Wassl, Frishtah; Wilkin, Christine; Ward, Maggie

    2017-01-01

    The International High School at Langley Park (IHSLP) opened during the 2015-2016 school year. By the fourth year of operation, the school will be home to 400 English language learners (ELLs) new to the United States. Working in partnership with the Internationals Network for Public Schools, the school is designed around the "HELLO…

  20. Human endothelial progenitor cells internalize high-density lipoprotein.

    Science.gov (United States)

    Srisen, Kaemisa; Röhrl, Clemens; Meisslitzer-Ruppitsch, Claudia; Ranftler, Carmen; Ellinger, Adolf; Pavelka, Margit; Neumüller, Josef

    2013-01-01

    Endothelial progenitor cells (EPCs) originate either directly from hematopoietic stem cells or from a subpopulation of monocytes. Controversial views about intracellular lipid traffic prompted us to analyze the uptake of human high density lipoprotein (HDL), and HDL-cholesterol in human monocytic EPCs. Fluorescence and electron microscopy were used to investigate distribution and intracellular trafficking of HDL and its associated cholesterol using fluorescent surrogates (bodipy-cholesterol and bodipy-cholesteryl oleate), cytochemical labels and fluorochromes including horseradish peroxidase and Alexa Fluor® 568. Uptake and intracellular transport of HDL were demonstrated after internalization periods from 0.5 to 4 hours. In case of HDL-Alexa Fluor® 568, bodipy-cholesterol and bodipy-cholesteryl oleate, a photooxidation method was carried out. HDL-specific reaction products were present in invaginations of the plasma membrane at each time of treatment within endocytic vesicles, in multivesicular bodies and at longer periods of uptake, also in lysosomes. Some HDL-positive endosomes were arranged in form of "strings of pearl"- like structures. HDL-positive multivesicular bodies exhibited intensive staining of limiting and vesicular membranes. Multivesicular bodies of HDL-Alexa Fluor® 568-treated EPCs showed multilamellar intra-vacuolar membranes. At all periods of treatment, labeled endocytic vesicles and organelles were apparent close to the cell surface and in perinuclear areas around the Golgi apparatus. No HDL-related particles could be demonstrated close to its cisterns. Electron tomographic reconstructions showed an accumulation of HDL-containing endosomes close to the trans-Golgi-network. HDL-derived bodipy-cholesterol was localized in endosomal vesicles, multivesicular bodies, lysosomes and in many of the stacked Golgi cisternae and the trans-Golgi-network Internalized HDL-derived bodipy-cholesteryl oleate was channeled into the lysosomal intraellular

  1. Human endothelial progenitor cells internalize high-density lipoprotein.

    Directory of Open Access Journals (Sweden)

    Kaemisa Srisen

    Full Text Available Endothelial progenitor cells (EPCs originate either directly from hematopoietic stem cells or from a subpopulation of monocytes. Controversial views about intracellular lipid traffic prompted us to analyze the uptake of human high density lipoprotein (HDL, and HDL-cholesterol in human monocytic EPCs. Fluorescence and electron microscopy were used to investigate distribution and intracellular trafficking of HDL and its associated cholesterol using fluorescent surrogates (bodipy-cholesterol and bodipy-cholesteryl oleate, cytochemical labels and fluorochromes including horseradish peroxidase and Alexa Fluor® 568. Uptake and intracellular transport of HDL were demonstrated after internalization periods from 0.5 to 4 hours. In case of HDL-Alexa Fluor® 568, bodipy-cholesterol and bodipy-cholesteryl oleate, a photooxidation method was carried out. HDL-specific reaction products were present in invaginations of the plasma membrane at each time of treatment within endocytic vesicles, in multivesicular bodies and at longer periods of uptake, also in lysosomes. Some HDL-positive endosomes were arranged in form of "strings of pearl"- like structures. HDL-positive multivesicular bodies exhibited intensive staining of limiting and vesicular membranes. Multivesicular bodies of HDL-Alexa Fluor® 568-treated EPCs showed multilamellar intra-vacuolar membranes. At all periods of treatment, labeled endocytic vesicles and organelles were apparent close to the cell surface and in perinuclear areas around the Golgi apparatus. No HDL-related particles could be demonstrated close to its cisterns. Electron tomographic reconstructions showed an accumulation of HDL-containing endosomes close to the trans-Golgi-network. HDL-derived bodipy-cholesterol was localized in endosomal vesicles, multivesicular bodies, lysosomes and in many of the stacked Golgi cisternae and the trans-Golgi-network Internalized HDL-derived bodipy-cholesteryl oleate was channeled into the lysosomal

  2. Re-demonstration without remediation – a missed opportunity? A national survey of internal medicine clerkship directors

    Directory of Open Access Journals (Sweden)

    Mary R. Hawthorne

    2014-12-01

    Full Text Available Background: Many different components factor into the final grade assigned for the internal medicine clerkship. Failure of one or more of these requires consideration of remedial measures. Purpose: To determine which assessment components are used to assign students a passing grade for the clerkship and what remediation measures are required when students do not pass a component. Methods: A national cross-sectional survey of Clerkship Directors in Internal Medicine (CDIM institutional members was conducted in April 2011. The survey included sections on remediation, grading practices, and demographics. The authors analyzed responses using descriptive and comparative statistics. Results: Response rate was 73% (86/113. Medicine clerkships required students to pass the following components: clinical evaluations 83 (97%, NBME subject exam 76 (88%, written assignments 40 (46%, OSCE 35 (41%, in-house written exam 23 (27%, and mini-CEX 19 (22%. When students failed a component of the clerkship for the first time, 55 schools (64% simply allowed students to make up the component, while only 16 (18% allowed a simple make-up for a second failure. Additional ward time was required by 24 schools (28% for a first-time failure of one component of the clerkship and by 49 (57% for a second failure. The presence or absence of true remedial measures in a school was not associated with clerkship director academic rank, grading scheme, or percent of students who failed the clerkship in the previous year. Conclusions: Most schools required passing clinical evaluations and NBME subject exam components to pass the medicine clerkship, but there was variability in other requirements. Most schools allowed students to simply re-take the component for a first-time failure. This study raises the question of whether true remediation is being undertaken before students are asked to re-demonstrate competence in a failed area of the clerkship to be ready for the subinternship

  3. Demonstration of Caustic-Side Solvent Extraction with Savannah River Site High Level Waste

    Energy Technology Data Exchange (ETDEWEB)

    Walker, D.D.

    2001-08-27

    Researchers successfully demonstrated the chemistry and process equipment of the Caustic-Side Solvent Extraction (CSSX) flowsheet for the decontamination of high level waste using a 33-stage, 2-cm centrifugal contactor apparatus at the Savannah River Technology Center. This represents the first CSSX process demonstration using Savannah River Site (SRS) high level waste. Three tests lasting 6, 12, and 48 hours processed simulated average SRS waste, simulated Tank 37H/44F composite waste, and Tank 37H/44F high level waste, respectively.

  4. What leadership behaviors were demonstrated by the principal in a high poverty, high achieving elementary school?

    Directory of Open Access Journals (Sweden)

    E. Hayet J. Woods

    2016-12-01

    Full Text Available Examined through the lens of leadership, were the behaviors of a principal as perceived by stakeholders. The following themes emerged: (1 Educating the Whole Child, with the subthemes: (a providing basic needs; (b academic interventions based on achievement data; (c an emphasis on reading; (d extended academic time; and (e relationships; and (2 Synergy of Expectations, with the subthemes: (a consistent student expectations; (b increased staff accountability; and (c community involvement. The researchers found that the principal by demonstrating behaviors as a change agent, a creator of vision, and a provider of necessary support and strategies, rather than adopting numerous programs, the school personnel were able to increase and sustain academic achievement of the students of poverty as well as their peers. Implications for principal practices, along with leadership preparatory programs are significant.

  5. DEMONSTRATION BULLETIN: HIGH VOLTAGE ELECTRON BEAM TECHNOLOGY - HIGH VOLTAGE ENVIRONMENTAL APPLICATIONS, INC.

    Science.gov (United States)

    The high energy electron beam irradiation technology is a low temperature method for destroying complex mixtures of hazardous organic chemicals in solutions containing solids. The system consists of a computer-automated, portable electron beam accelerator and a delivery system. T...

  6. Internal Ballistics of High Velocity Special Purpose Guns

    Directory of Open Access Journals (Sweden)

    V. K. Gupta

    1976-07-01

    Full Text Available More and more conventional guns are being utilized as special purpose guns to achieve very high velocity by using unconventionally high C/W ratios. The existing methods of internal ballistics give satisfactory results only for low (less than one C/W ratios. In the present paper the basic internal ballistic equations have been modified to cater for non-linear rate of burning, cubical form function and a realistic pressure gradient between breech face and the projectile base. The equations have been numerically solved. The results for low and high C/W ratios have been compared with those obtained by using conventional methods.

  7. Isorefractive high internal phase emulsion organogels for light induced reactions.

    Science.gov (United States)

    Zhang, Tao; Guo, Qipeng

    2016-03-25

    Isorefractive high internal phase emulsion (HIPE) organogels have been fabricated and investigated for light induced reactions. High transparency facilitates both the UV and visible light induced reactions within HIPE organogels. Transparent HIPE organogels are advantageous for light induced polymerizations, accelerating such polymerizations and enabling the preparation of large polyHIPE monoliths.

  8. High Temperature Syngas Cleanup Technology Scale-up and Demonstration Project

    Energy Technology Data Exchange (ETDEWEB)

    Gardner, Ben [Research Triangle Inst. (RTI), Research Triangle Park, NC (United States); Turk, Brian [Research Triangle Inst. (RTI), Research Triangle Park, NC (United States); Denton, David [Research Triangle Inst. (RTI), Research Triangle Park, NC (United States); Gupta, Raghubir [Research Triangle Inst. (RTI), Research Triangle Park, NC (United States)

    2015-09-30

    Gasification is a technology for clean energy conversion of diverse feedstocks into a wide variety of useful products such as chemicals, fertilizers, fuels, electric power, and hydrogen. Existing technologies can be employed to clean the syngas from gasification processes to meet the demands of such applications, but they are expensive to build and operate and consume a significant fraction of overall parasitic energy requirements, thus lowering overall process efficiency. RTI International has developed a warm syngas desulfurization process (WDP) utilizing a transport-bed reactor design and a proprietary attrition-resistant, high-capacity solid sorbent with excellent performance replicated at lab, bench, and pilot scales. Results indicated that WDP technology can improve both efficiency and cost of gasification plants. The WDP technology achieved ~99.9% removal of total sulfur (as either H2S or COS) from coal-derived syngas at temperatures as high as 600°C and over a wide range of pressures (20-80 bar, pressure independent performance) and sulfur concentrations. Based on the success of these tests, RTI negotiated a cooperative agreement with the U.S. Department of Energy for precommercial testing of this technology at Tampa Electric Company’s Polk Power Station IGCC facility in Tampa, Florida. The project scope also included a sweet water-gas-shift process for hydrogen enrichment and an activated amine process for 90+% total carbon capture. Because the activated amine process provides some additional non-selective sulfur removal, the integration of these processes was expected to reduce overall sulfur in the syngas to sub-ppmv concentrations, suitable for most syngas applications. The overall objective of this project was to mitigate the technical risks associated with the scale up and integration of the WDP and carbon dioxide capture technologies, enabling subsequent commercial-scale demonstration. The warm syngas cleanup pre-commercial test unit

  9. High-Lift Propeller System Configuration Selection for NASA's SCEPTOR Distributed Electric Propulsion Flight Demonstrator

    Science.gov (United States)

    Patterson, Michael D.; Derlaga, Joseph M.; Borer, Nicholas K.

    2016-01-01

    Although the primary function of propellers is typically to produce thrust, aircraft equipped with distributed electric propulsion (DEP) may utilize propellers whose main purpose is to act as a form of high-lift device. These \\high-lift propellers" can be placed upstream of wing such that, when the higher-velocity ow in the propellers' slipstreams interacts with the wing, the lift is increased. This technique is a main design feature of a new NASA advanced design project called Scalable Convergent Electric Propulsion Technology Operations Research (SCEPTOR). The goal of the SCEPTOR project is design, build, and y a DEP aircraft to demonstrate that such an aircraft can be much more ecient than conventional designs. This paper provides details into the high-lift propeller system con guration selection for the SCEPTOR ight demonstrator. The methods used in the high-lift propeller system conceptual design and the tradeo s considered in selecting the number of propellers are discussed.

  10. Vascular compression in glossopharyngeal neuralgia: demonstration by high-resolution MRI at 3 tesla

    Energy Technology Data Exchange (ETDEWEB)

    Fischbach, F.; Ricke, J.; Bruhn, H. [Department of Radiology, Charite, Campus Virchow Klinikum, Humboldt-University, Augustenburger Platz 1, 13352, Berlin (Germany); Lehmann, T.N. [Department of Neurosurgery, Charite, Campus Virchow Klinikum, Humboldt-University, Augustenberger Platz 1, 13353, Berlin (Germany)

    2003-11-01

    We report a case of glossopharyngeal neuralgia with vascular compression. High-resolution MRI at 3 tesla demonstrated the posterior inferior cerebellar artery to be closely related to the rootlets of the left glossopharyngeal nerve in a patient who suffered attacks of burning sensation in the left side of the throat. The MRI findings were confirmed at curative surgery. (orig.)

  11. A Simple Demonstration of the High-Temperature Electrical Conductivity of Glass

    Science.gov (United States)

    Chiaverina, Chris

    2014-01-01

    We usually think of glass as a good electrical insulator; this, however, is not always the case. There are several ways to show that glass becomes conducting at high temperatures, but the following approach, devised by Brown University demonstration manager Gerald Zani, may be one of the simplest to perform.

  12. A Simple Demonstration of the High-Temperature Electrical Conductivity of Glass

    Science.gov (United States)

    Chiaverina, Chris

    2014-01-01

    We usually think of glass as a good electrical insulator; this, however, is not always the case. There are several ways to show that glass becomes conducting at high temperatures, but the following approach, devised by Brown University demonstration manager Gerald Zani, may be one of the simplest to perform.

  13. The AX-PET project Demonstration of a high resolution axial 3D PET

    CERN Document Server

    Bolle, E; Casella, C; Chesi, E; Clinthorne, N; Cochran, E; De Leo, R; Dissertori, G; Djambazov, G; Fanti, V; Honscheid, K; Huh, S; Johnson, I; Joram, C; Kagan, H; Lustermann, W; Meddi, F; Nappi, E; Nessi-Tedaldi, F; Oliver, J F; Pauss, P; Rafecas, M; Renker, D; Rudge, A; Schinzel, D; Schneider, T; Seguinot, J; Smith, S; Solevi, P; Stapnes, S; Weilhammer, P

    2010-01-01

    The AX-PET is a new geometrical concept for a high resolution 3D PET scanner, based on matrices of axially oriented LYSO crystals interleaved by stacks of WLS, both individually read out by G-APDs. A PET demonstrator, based on two detector modules used in coincidence, is currently under construction.

  14. Demonstrations of Agency in Contemporary International Children's Literature: An Exploratory Critical Content Analysis across Personal, Social, and Cultural Dimensions

    Science.gov (United States)

    Mathis, Janelle B.

    2015-01-01

    International children's literature has the potential to create global experiences and cultural insights for young people confronted with limited and biased images of the world offered by media. The current inquiry was designed to explore, through a critical content analysis approach, international children's literature in which characters…

  15. Demonstrations of Agency in Contemporary International Children's Literature: An Exploratory Critical Content Analysis across Personal, Social, and Cultural Dimensions

    Science.gov (United States)

    Mathis, Janelle B.

    2015-01-01

    International children's literature has the potential to create global experiences and cultural insights for young people confronted with limited and biased images of the world offered by media. The current inquiry was designed to explore, through a critical content analysis approach, international children's literature in which characters…

  16. Design, Test and Demonstration of Saturable Reactor High-Temperature Superconductor Fault Current Limiters

    Energy Technology Data Exchange (ETDEWEB)

    Darmann, Frank [Zenergy Power, Inc., Burlingame, CA (United States); Lombaerde, Robert [Zenergy Power, Inc., Burlingame, CA (United States); Moriconi, Franco [Zenergy Power, Inc., Burlingame, CA (United States); Nelson, Albert [Zenergy Power, Inc., Burlingame, CA (United States)

    2012-03-01

    Zenergy Power has successfully designed, built, tested, and installed in the US electrical grid a saturable reactor Fault Current Limiter. Beginning in 2007, first as SC Power Systems and from 2008 as Zenergy Power, Inc., ZP used DOE matching grant and ARRA funds to help refine the design of the saturated reactor fault current limiter. ZP ultimately perfected the design of the saturated reactor FCL to the point that ZP could reliably design a suitable FCL for most utility applications. Beginning with a very basic FCL design using 1G HTS for a coil housed in a LN2 cryostat for the DC bias magnet, the technology progressed to a commercial system that was offered for sale internationally. Substantial progress was made in two areas. First, the cryogenics cooling system progressed from a sub-cooled liquid nitrogen container housing the HTS coils to cryostats utilizing dry conduction cooling and reaching temperatures down to less than 20 degrees K. Large, round cryostats with warm bore diameters of 1.7 meters enabled the design of large tanks to hold the AC components. Second, the design of the AC part of the FCL was refined from a six legged spider design to a more compact and lighter design with better fault current limiting capability. Further refinement of the flux path and core shape led to an efficient saturated reactor design requiring less Ampere-turns to saturate the core. In conclusion, the development of the saturable reactor FCL led to a more efficient design not requiring HTS magnets and their associated peripheral equipment, which yielded a more economical product in line with the electric utility industry expectations. The original goal for the DOE funding of the ZP project Design, Test and Demonstration of Saturable Reactor High-Temperature Superconductor Fault Current Limiters was to stimulate the HTS wire industry with, first 1G, then 2G, HTS wire applications. Over the approximately 5 years of ZP's product development program, the amount of HTS

  17. Prototyping of an HV-CMOS demonstrator for the High Luminosity-LHC upgrade

    Science.gov (United States)

    Vilella, E.; Benoit, M.; Casanova, R.; Casse, G.; Ferrere, D.; Iacobucci, G.; Peric, I.; Vossebeld, J.

    2016-01-01

    HV-CMOS sensors can offer important advantages in terms of material budget, granularity and cost for large area tracking systems in high energy physics experiments. This article presents the design and simulated results of an HV-CMOS pixel demonstrator for the High Luminosity-LHC. The pixel demonstrator has been designed in the 0.35 μm HV-CMOS process from ams AG and submitted for fabrication through an engineering run. To improve the response of the sensor, different wafers with moderate to high substrate resistivities are used to fabricate the design. The prototype consists of four large analog and standalone matrices with several pixel flavours, which are all compatible for readout with the FE-I4 ASIC. Details about the matrices and the pixel flavours are provided in this article.

  18. Demonstrating Reliable High Level Waste Slurry Sampling Techniques to Support Hanford Waste Processing

    Energy Technology Data Exchange (ETDEWEB)

    Kelly, Steven E.

    2013-11-11

    The Hanford Tank Operations Contractor (TOC) and the Hanford Waste Treatment and Immobilization Plant (WTP) contractor are both engaged in demonstrating mixing, sampling, and transfer system capability using simulated Hanford High-Level Waste (HL W) formulations. This work represents one of the remaining technical issues with the high-level waste treatment mission at Hanford. The TOC must demonstrate the ability to adequately mix and sample high-level waste feed to meet the WTP Waste Acceptance Criteria and Data Quality Objectives. The sampling method employed must support both TOC and WTP requirements. To facilitate information transfer between the two facilities the mixing and sampling demonstrations are led by the One System Integrated Project Team. The One System team, Waste Feed Delivery Mixing and Sampling Program, has developed a full scale sampling loop to demonstrate sampler capability. This paper discusses the full scale sampling loops ability to meet precision and accuracy requirements, including lessons learned during testing. Results of the testing showed that the Isolok(R) sampler chosen for implementation provides precise, repeatable results. The Isolok(R) sampler accuracy as tested did not meet test success criteria. Review of test data and the test platform following testing by a sampling expert identified several issues regarding the sampler used to provide reference material used to judge the Isolok's accuracy. Recommendations were made to obtain new data to evaluate the sampler's accuracy utilizing a reference sampler that follows good sampling protocol.

  19. Next Generation Fast RF Interlock Module and ATCA Adapter for ILC High Availability RF Test Station Demonstration

    Energy Technology Data Exchange (ETDEWEB)

    Larsen, R

    2009-10-17

    High availability interlocks and controls are required for the ILC (International Linear Collider) L-Band high power RF stations. A new F3 (Fast Fault Finder) VME module has been developed to process both fast and slow interlocks using FPGA logic to detect the interlock trip excursions. This combination eliminates the need for separate PLC (Programmable Logic Controller) control of slow interlocks. Modules are chained together to accommodate as many inputs as needed. In the next phase of development the F3's will be ported to the new industry standard ATCA (Advanced Telecom Computing Architecture) crate (shelf) via a specially designed VME adapter module with IPMI (Intelligent Platform Management Interface). The goal is to demonstrate auto-failover and hot-swap for future partially redundant systems.

  20. Fifth International Conference on High Energy Density Physics

    Energy Technology Data Exchange (ETDEWEB)

    Beg, Farhat

    2017-07-05

    The Fifth International Conference on High Energy Density Physics (ICHED 2015) was held in the Catamaran Hotel in San Diego from August 23-27, 2015. This meeting was the fifth in a series which began in 2008 in conjunction with the April meeting of the American Physical Society (APS). The main goal of this conference has been to bring together researchers from all fields of High Energy Density Science (HEDS) into one, unified meeting.

  1. 2nd International Summer School in High Energy Physics

    CERN Document Server

    Pak, N K; Serin, M; The Standard Model and Beyond

    2008-01-01

    This volume collects the edited tutorial lectures given at The Second International Summer School in High Energy Physics in Mgla, Turkey, in September 2006 - an annual event with international participation and a special focus on work done in the regions of central Asia. With emphasis on the standard model and beyond, lectures were devoted to presenting an introduction and update to many of the relevant topics, such as chiral perturbation theory, the Higgs mechanism, heavy flavour and b physics, CP violation, the AdS/CFT correspondence, ideas on grand unification and neutrino physics and astrophysics

  2. Chemical Analysis of Pottery Demonstrates Prehistoric Origin for High-Altitude Alpine Dairying.

    Science.gov (United States)

    Carrer, Francesco; Colonese, André Carlo; Lucquin, Alexandre; Petersen Guedes, Eduardo; Thompson, Anu; Walsh, Kevin; Reitmaier, Thomas; Craig, Oliver E

    2016-01-01

    The European high Alps are internationally renowned for their dairy produce, which are of huge cultural and economic significance to the region. Although the recent history of alpine dairying has been well studied, virtually nothing is known regarding the origins of this practice. This is due to poor preservation of high altitude archaeological sites and the ephemeral nature of transhumance economic practices. Archaeologists have suggested that stone structures that appear around 3,000 years ago are associated with more intense seasonal occupation of the high Alps and perhaps the establishment of new economic strategies. Here, we report on organic residue analysis of small fragments of pottery sherds that are occasionally preserved both at these sites and earlier prehistoric rock-shelters. Based mainly on isotopic criteria, dairy lipids could only be identified on ceramics from the stone structures, which date to the Iron Age (ca. 3,000-2,500 BP), providing the earliest evidence of this practice in the high Alps. Dairy production in such a marginal environment implies a high degree of risk even by today's standards. We postulate that this practice was driven by population increase and climate deterioration that put pressure on lowland agropastoral systems and the establishment of more extensive trade networks, leading to greater demand for highly nutritious and transportable dairy products.

  3. The study for the high qualification of international nuclear training

    Energy Technology Data Exchange (ETDEWEB)

    Noh, Byong Chull; Kim, Hyun Jin

    2012-12-15

    It is suggested how to reach high qualification of KAERI international nuclear training and how to play a leading role for new paradigm on the international training on the world. 1. The formulation of the core nuclear training framework- The systematic formulation of nuclear training framework based on the existing turning course design 2. Planning and operation of KAERI- Excellent Technology Series training course- The advertisement for KAERI Excellent Technology through the continuous international training and the future market development on the world for the nuclear technology 3. e-Learning training contents development- e-Learning training contents development to play a leading role for new training paradigm on the world and to overcome the limit of time/spacy.

  4. Validation of a highly integrated SiPM readout system with a TOF-PET demonstrator

    Science.gov (United States)

    Niknejad, T.; Setayeshi, S.; Tavernier, S.; Bugalho, R.; Ferramacho, L.; Di Francesco, A.; Leong, C.; Rolo, M. D.; Shamshirsaz, M.; Silva, J. C.; Silva, R.; Silveira, M.; Zorraquino, C.; Varela, J.

    2016-12-01

    We have developed a highly integrated, fast and compact readout electronics for Silicon Photomultiplier (SiPM) based Time of Flight Positron Emission Tomography (TOF-PET) scanners. The readout is based on the use of TOP-PET Application Specific Integrated Circuit (PETsys TOFPET1 ASIC) with 64 channels, each with its amplifier, discriminator, Time to Digital Converter (TDC) and amplitude determination using Time Over Threshold (TOT). The ASIC has 25 ps r.m.s. intrinsic time resolution and fully digital output. The system is optimised for high rates, good timing, low power consumption and low cost. For validating the readout electronics, we have built a technical PET scanner, hereafter called ``demonstrator'', with 2'048 SiPM channels. The PET demonstrator has 16 compact Detector Modules (DM). Each DM has two ASICs reading 128 SiPM pixels in one-to-one coupling to 128 Lutetium Yttrium Orthosilicate (LYSO) crystals measuring 3.1 × 3.1 × 15 mm3 each. The data acquisition system for the demonstrator has two Front End Boards type D (FEB/D), each collecting the data of 1'024 channels (8 DMs), and transmitting assembled data frames through a serial link (4.8 Gbps), to a single Data Acquisition (DAQ) board plugged into the Peripheral Component Interconnect Express (PCIe) bus of the data acquisition PC. Results obtained with this PET demonstrator are presented.

  5. Demonstration of a stable high ionic conductivity solid oxide electrolyte. Final report, November 1993-January 1995

    Energy Technology Data Exchange (ETDEWEB)

    Wachsman, E.D.; Pound, B.G.; Jayaweera, P.; Jiang, N.; Lowe, D.

    1996-01-01

    The overall objective of this project is to develop a novel, low-cost, intermediate temperature, solid oxide fuel cell (SOFC) using currently available highly conducting CeO2 electrolytes. The specific technical objective is to demonstrate that a ceria electrolyte can be modified to obtain stability against reduction by H2 at the anode, as evident by a stable open circuit potential that is higher than could be obtained with an unmodifed ceria electrolyte.

  6. Demonstration of high-Q mid-infrared chalcogenide glass-on-silicon resonators.

    Science.gov (United States)

    Lin, Hongtao; Li, Lan; Zou, Yi; Danto, Sylvain; Musgraves, J David; Richardson, Kathleen; Kozacik, Stephen; Murakowski, Maciej; Prather, Dennis; Lin, Pao T; Singh, Vivek; Agarwal, Anu; Kimerling, Lionel C; Hu, Juejun

    2013-05-01

    We demonstrated high-index-contrast, waveguide-coupled As2Se3 chalcogenide glass resonators monolithically integrated on silicon fabricated using optical lithography and a lift-off process. The resonators exhibited a high intrinsic quality factor of 2×10(5) at 5.2 μm wavelength, which is among the highest values reported in on-chip mid-infrared (mid-IR) photonic devices. The resonator can serve as a key building block for mid-IR planar photonic circuits.

  7. Post Irradiation Examination Plan for High-Burnup Demonstration Project Sister Rods

    Energy Technology Data Exchange (ETDEWEB)

    Scaglione, John M [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Montgomery, Rose [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Bevard, Bruce Balkcom [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-04-01

    This test plan describes the experimental work to be implemented by the U.S. Department of Energy (DOE) Office of Nuclear Energy (NE) to characterize high burnup (HBU) spent nuclear fuel (SNF) in conjunction with the High Burnup Dry Storage Cask Research and Development Project and serves to coordinate and integrate the multi-year experimental program to collect and develop data regarding the continued storage and eventual transport of HBU (i.e., >45 GWd/MTU) SNF. The work scope involves the development, performance, technical integration, and oversight of measurements and collection of relevant data, guided by analyses and demonstration of need.

  8. Demonstration of resonant backward Raman amplification in high-density gas-jet plasma

    Science.gov (United States)

    Wu, Z. H.; Zhou, K. N.; Zheng, X. M.; Wei, X. F.; Zhu, Q. H.; Su, J. Q.; Xie, N.; Jiao, Z. H.; Peng, H.; Wang, X. D.; Sun, L.; Li, Q.; Huang, Z.; Zuo, Y. L.

    2016-10-01

    Backward Raman amplification was observed in a 0.7 mm-long high-density gas jet plasma. The 800 nm 30 fs seed pulse was amplified by a factor  ∼28, with an output energy of 2.8 mJ. The output spectra showed that the waveband around 800 nm was significantly amplified. The experimental result demonstrated that the resonant Raman amplification can be realized in high-density plasma against strong plasma instability.

  9. Real time demonstration of high bitrate quantum random number generation with coherent laser light

    CERN Document Server

    Symul, T; Lam, P K; 10.1063/1.3597793

    2011-01-01

    We present a random number generation scheme that uses broadband measurements of the vacuum field contained in the radio-frequency sidebands of a single-mode laser. Even though the measurements may contain technical noise, we show that suitable algorithms can transform the digitized photocurrents into a string of random numbers that can be made arbitrarily correlated with a subset of the quantum fluctuations (high quantum correlation regime) or arbitrarily immune to environmental fluctuations (high environmental immunity). We demonstrate up to 2 Gbps of real time random number generation that were verified using standard randomness tests.

  10. Demonstration of submersible high-throughput microfluidic immunosensors for underwater explosives detection.

    Science.gov (United States)

    Adams, André A; Charles, Paul T; Deschamps, Jeffrey R; Kusterbeck, Anne W

    2011-11-15

    Significant security threats posed by highly energetic nitroaromatic compounds in aquatic environments and the demilitarization and pending cleanup of areas previously used for munitions manufacture and storage represent a challenge for less expensive, faster, and more sensitive systems capable of analyzing groundwater and seawater samples for trace levels of explosive materials. Presented here is an inexpensive high throughput microfluidic immunosensor (HTMI) platform intended for the rapid, highly selective quantitation of nitroaromatic compounds in the field. Immunoaffinity and fluorescence detection schemes were implemented in tandem on a novel microfluidic device containing 39 parallel microchannels that were 500 μm tall, 250 μm wide, and 2.54 cm long with covalently tethered antibodies that was engineered for high-throughput high-volume sample processing. The devices were produced via a combination of high precision micromilling and hot embossing. Mass transfer limitations were found in conventional microsystems and were minimized due to higher surface area to volume ratios that exceeded those possessed by conventional microdevices and capillaries. Until now, these assays were limited to maximum total volume flow rates of ~1 mL/min due in part to kinetics and high head pressures of single microchannels. In the design demonstrated here, highly parallelized microchannels afforded up to a 100-fold increase in total volume flow rate while maintaining favorable kinetic constraints for efficient antigen-antibody interaction. The assay employed total volume throughput of up to 6 mL/min while yielding signal-to-noise ratios of >15 in all cases. In addition to samples being processed up to 60 times faster than in conventional displacement-based immunoassays, the current system was capable of quantitating 0.01 ng/mL TNT samples without implementing offline preconcentration, thereby, demonstrating the ability to improve sensitivity by as much as 2 orders of magnitude

  11. High-Efficiency Solar Thermal Vacuum Demonstration Completed for Refractive Secondary Concentrator

    Science.gov (United States)

    Wong, Wayne A.

    2001-01-01

    Common to many of the space applications that utilize solar thermal energy--such as electric power conversion, thermal propulsion, and furnaces--is a need for highly efficient, solar concentration systems. An effort is underway at the NASA Glenn Research Center to develop the refractive secondary concentrator, which uses refraction and total internal reflection to efficiently concentrate and direct solar energy. When used in combination with advanced lightweight primary concentrators, the refractive secondary concentrator enables very high system concentration ratios (10,000 to 1) and very high temperatures (>2000 K). The innovative refractive secondary concentrator offers significant advantages over all other types of secondary concentrators. The refractive secondary offers the highest throughput efficiency, provides for flux tailoring, requires no active cooling, relaxes the pointing and tracking requirements of the primary concentrator, and enables very high system concentration ratios. This technology has broad applicability to any system that requires the conversion of solar energy to heat. Glenn initiated the development of the refractive secondary concentrator in support of Shooting Star, a solar thermal propulsion flight experiment, and continued the development in support of Space Solar Power.

  12. Processable high internal phase Pickering emulsions using depletion attraction.

    Science.gov (United States)

    Kim, KyuHan; Kim, Subeen; Ryu, Jiheun; Jeon, Jiyoon; Jang, Se Gyu; Kim, Hyunjun; Gweon, Dae-Gab; Im, Won Bin; Han, Yosep; Kim, Hyunjung; Choi, Siyoung Q

    2017-02-01

    High internal phase emulsions have been widely used as templates for various porous materials, but special strategies are required to form, in particular, particle-covered ones that have been more difficult to obtain. Here, we report a versatile strategy to produce a stable high internal phase Pickering emulsion by exploiting a depletion interaction between an emulsion droplet and a particle using water-soluble polymers as a depletant. This attractive interaction facilitating the adsorption of particles onto the droplet interface and simultaneously suppressing desorption once adsorbed. This technique can be universally applied to nearly any kind of particle to stabilize an interface with the help of various non- or weakly adsorbing polymers as a depletant, which can be solidified to provide porous materials for many applications.

  13. Processable high internal phase Pickering emulsions using depletion attraction

    Science.gov (United States)

    Kim, Kyuhan; Kim, Subeen; Ryu, Jiheun; Jeon, Jiyoon; Jang, Se Gyu; Kim, Hyunjun; Gweon, Dae-Gab; Im, Won Bin; Han, Yosep; Kim, Hyunjung; Choi, Siyoung Q.

    2017-02-01

    High internal phase emulsions have been widely used as templates for various porous materials, but special strategies are required to form, in particular, particle-covered ones that have been more difficult to obtain. Here, we report a versatile strategy to produce a stable high internal phase Pickering emulsion by exploiting a depletion interaction between an emulsion droplet and a particle using water-soluble polymers as a depletant. This attractive interaction facilitating the adsorption of particles onto the droplet interface and simultaneously suppressing desorption once adsorbed. This technique can be universally applied to nearly any kind of particle to stabilize an interface with the help of various non- or weakly adsorbing polymers as a depletant, which can be solidified to provide porous materials for many applications.

  14. Processable high internal phase Pickering emulsions using depletion attraction

    Science.gov (United States)

    Kim, KyuHan; Kim, Subeen; Ryu, Jiheun; Jeon, Jiyoon; Jang, Se Gyu; Kim, Hyunjun; Gweon, Dae-Gab; Im, Won Bin; Han, Yosep; Kim, Hyunjung; Choi, Siyoung Q.

    2017-01-01

    High internal phase emulsions have been widely used as templates for various porous materials, but special strategies are required to form, in particular, particle-covered ones that have been more difficult to obtain. Here, we report a versatile strategy to produce a stable high internal phase Pickering emulsion by exploiting a depletion interaction between an emulsion droplet and a particle using water-soluble polymers as a depletant. This attractive interaction facilitating the adsorption of particles onto the droplet interface and simultaneously suppressing desorption once adsorbed. This technique can be universally applied to nearly any kind of particle to stabilize an interface with the help of various non- or weakly adsorbing polymers as a depletant, which can be solidified to provide porous materials for many applications. PMID:28145435

  15. Benchmarking International High-Technology Research Laboratories' Marketing in Europe

    OpenAIRE

    Salonen, Suvi-Anna

    2014-01-01

    The thesis studies current marketing conventions of international high-technology research laboratories in Europe and is done for the UNELMA-project. UNELMA is a joint project between Finnish and Swedish universities and institutions funded by the European Union, the Provincial Government of Norbotten, Lapin Liitto and Interreg IV A. The project wishes to create a network of professional services which will benefit companies in the Bothnian Arc between Finland and Sweden. The study itself...

  16. Experimental Demonstration of a Highly Efficient Fan-out Polarization Grating.

    Science.gov (United States)

    Wan, Chenhao; Chen, Jian; Tang, Xiahui; Zhan, Qiwen

    2016-12-23

    Highly efficient fan-out elements are crucial in coherent beam combining architectures especially in coupled laser resonators where the beam passes through the fan-out element twice per round trip. Although the theoretical efficiency is usually less than 86%, the Dammann gratings are ubiquitously utilized in a variety of types of coherent beam combining systems due to the facile design and fabrication. In the current paper, we experimentally demonstrate a highly efficient fan-out polarization grating. It is the first time to our knowledge that all the three space-variant parameters of a polarization grating are simultaneously optimized to achieve the function of multi-beam splitting. Besides the high fan-out efficiency, the ability to control the polarization states of individual split beams is another advantage of this polarization grating. The novel polarization grating is promising to find applications in laser beam combining systems.

  17. Demonstration of a High Open-Circuit Voltage GaN Betavoltaic Microbattery

    Institute of Scientific and Technical Information of China (English)

    CHENG Zai-Jun; SAN Hai-Sheng; CHEN Xu-Yuan; LIU Bo; FENG Zhi-Hong

    2011-01-01

    A high open-circuit voltage betavoltaic microbattery based on a GaN p-i-n diode is demonstrated.Under the irradiation of a 4× 4mm2 planar solid 63Ni source with an activity of 2mCi,the open-circuit voltage Voc of the fabricated single 2x2mm2 cell reaches as high as 1.62 V,the short-circuit current density Jsc is measured to be 16nA/cm2.The microbattery has a fill factor of 55%,and the energy conversion effciency of beta radiation into electricity reaches to 1.13%.The results suggest that GaN is a highly promising potential candidate for long-life betavoltaic microbatteries used as power supplies for microelectromechanical system devices.

  18. Test and demonstration of a high performance slot furnace. Progress report, December 1, 1976--June 1, 1977

    Energy Technology Data Exchange (ETDEWEB)

    Bjerklie, J.W.; Most, I.G.

    1977-06-01

    Hague International has embarked upon a two phase program that will verify and demonstrate several methods of energy conservation in the forge industry. A slot furnace was built and installed at Hague International, which incorporates these methods. Tests will be performed on this furnace to demonstrate the effects of the various energy saving devices separately and in combination. This overall project is divided into two phases: test facility preparation and performance tests; and furnace demonstration. Progress through June 1, 1977 on Phase 1 of the overall project is reported. Included is a discussion of the test facility design, instrumentation schedule, furnace modification, burner design, and test program.

  19. Demonstration of Cathode Emittance Dominated High Bunch Charge Beams in a DC gun-based Photoinjector

    CERN Document Server

    Gulliford, Colwyn; Bazarov, Ivan; Dunham, Bruce; Cultrera, Luca

    2015-01-01

    We present the results of transverse emittance and longitudinal current profile measurements of high bunch charge (greater than or equal to 100 pC) beams produced in the DC gun-based Cornell Energy Recovery Linac Photoinjector. In particular, we show that the cathode thermal and core beam emittances dominate the final 95% and core emittance measured at 9-9.5 MeV. Additionally, we demonstrate excellent agreement between optimized 3D space charge simulations and measurement, and show that the quality of the transverse laser distribution limits the optimal simulated and measured emittances. These results, previously thought achievable only with RF guns, demonstrate that DC gun based photoinjectors are capable of delivering beams with sufficient single bunch charge and beam quality suitable for many current and next generation accelerator projects such as Energy Recovery Linacs (ERLs) and Free Electron Lasers (FELs).

  20. Demonstration of ultra-high-Q small mode volume toroid microcavities on a chip

    CERN Document Server

    Kippenberg, T J; Vahala, K J

    2004-01-01

    Optical microcavities confine light spatially and temporally and find application in a wide range of fundamental and applied studies. In many areas, the microcavity figure of merit is not only determined by photon lifetime (or the equivalent quality-factor, Q), but also by simultaneous achievement of small mode volume V . Here we demonstrate ultra-high Q-factor small mode volume toroid microcavities on-a-chip, which exhibit a Q/V factor of more than $10^{6}(\\lambda/n)^{-3}$. These values are the highest reported to date for any chip-based microcavity. A corresponding Purcell factor in excess of 200 000 and a cavity finesse of $2.8\\times10^{6}$ is achieved, demonstrating that toroid microcavities are promising candidates for studies of the Purcell effect, cavity QED or biochemical sensing

  1. Demonstration of ultra-high-Q small mode volume toroid microcavities on a chip

    Science.gov (United States)

    Kippenberg, T. J.; Spillane, S. M.; Vahala, K. J.

    2004-12-01

    Optical microcavities confine light spatially and temporally and find application in a wide range of fundamental and applied studies. In many areas, the microcavity figure of merit is not only determined by photon lifetime (or the equivalent quality-factor, Q), but also by simultaneous achievement of small mode volume (V). Here we demonstrate ultra-high Q-factor small mode volume toroid microcavities on-a-chip, which exhibit a Q/V factor of more than 106(λ/n)-3. These values are the highest reported to date for any chip-based microcavity. A corresponding Purcell factor in excess of 200 000 and a cavity finesse of >2.8×106 is achieved, demonstrating that toroid microcavities are promising candidates for studies of the Purcell effect, cavity QED or biochemical sensing.

  2. Tolosa-Hunt syndrome. A CT demonstration of a high-density lesion

    Energy Technology Data Exchange (ETDEWEB)

    Hirata, Kazuhiro; Muramoto, Masato; Chiba, Yasuhiro; Yagishita, Saburo

    1987-08-01

    CT scan studies of the Tolosa-Hunt syndrome have seldom been reported; positive abnormal findings are especially rare. A 36-year-old man suffered from steady, boring pain behind the left eye for one year. On admission he complained of diplopia on the right lateral gaze and hypesthesea of the first and second divisions of the left trigeminal nerve. A CT scan demonstrated a slightly high-density lesion, which was homogeneously enhanced, in the left cavernous portion and the superior orbital fissure. Carotid angiograms demonstrated no abnormal finding, and the cavernous sinus venography revealed no filling of the left cavernous sinus. A left front-temporal craniotomy was performed for the purpose of biopsy. A histological examination revealed non-specific focal granulomatous pachymeningitis. He responded dramatically to systemic steroid therapy, and he became pain-free by the fourth post-operative day. This diagnosis of the Tolosa-Hunt syndrome was confirmed both clinically and etiologically; however, the CT scan after the treatment demonstrated no definitive change in the lesion. The CT scan is useful for the diagnosis of this syndrome. Considering the stage of the illness, it is possible that the high-resolution CT scan can demonstrate this lesion with an advanced technique. The clinical diagnosis is almost easy, and surgical exploration is not always necessary if there is a prompt remission upon systemic steroid therapy. However, this syndrome should be differentiated from the other causes by appropriate examinations. Some cases similar to ours, especially suspected tumors, need surgical exploration because these angiographic findings are not specific.

  3. Internal conversion in highly-stripped {sup 83}Kr ions

    Energy Technology Data Exchange (ETDEWEB)

    Rehm, K.E.; Ahmad, I.; Gehring, J. [and others

    1995-08-01

    The transition probability per unit time for the decay of a nuclear level via internal conversion (IC), {lambda}IC, depends on the electron environment of the nucleus. For example, inner-shell conversion in highly-charged ions can change appreciably as electrons are successively removed from the ion. Magnetic dipole (Ml) transitions are especially sensitive to this effect since the internal conversion depends strongly on the electron density at the nucleus. Hence, measurements of {lambda}IC,q, the internal conversion rate in an ion with charge state q, can provide good tests of theoretical electron wave functions if the electron configuration in the ions is known. In a previous experiment, a new method which identifies charge-changing events during passage of ion beams through a magnetic spectrometer was used to determine {lambda}IC,q for the 14.4-keV isomer in {sup 57}Fe. This contribution reports measurements made using the same technique for the 9.4-keV isomer in {sup 83}Kr. A beam of {sup 83}Kr with energy 650 MeV bombarded a Au target with a thickness 300 {mu}g cm{sup -2}. Secondary scattered beams were accepted and analyzed by an Enge magnetic spectrometer. The numbers of excited nuclei decaying during passage through the spectrometer and their internal conversion rates were deduced from the pattern of events measured in the spectrometer focal plane.

  4. Demonstration of high-speed multi-user multi-carrier CDMA visible light communication

    Science.gov (United States)

    Yang, Chao; Wang, Yuanquan; Wang, Yiguang; Huang, Xingxing; Chi, Nan

    2015-02-01

    We experimentally demonstrated a high-speed multi-user multi-carrier code-division multiple access (MC-CDMA) visible light communication (VLC) system. By employing a commercially available red light emitting diode (LED) and an avalanche photo diode (APD), we achieved a 16-user VLC system enabled by MC-CDMA, pre- and post-equalization, with an overall bit rate of 750 Mb/s over 1.5 m free-space transmission. The measured bit error ratio (BER) of each user is below the 7% pre-forward-error-correction (pre-FEC) threshold of 3.8×10-3.

  5. Demonstration of a Low-Lift Heat Pump for High-Power Spacecraft Thermal Control

    Science.gov (United States)

    Grzyll, Lawrence R.

    2006-01-01

    This paper describes the development and demonstration of a prototype low-lift heat pump for high-power spacecraft thermal control The low-lift heat pump was designed to provide 25 kW of cooling at 303 K and transport this waste heat to a radiator for heat rejection. To accomplish this, a demonstration heat pump with an evaporation temperature of 298 K and a condensing temperature of 301 K was designed and built. HFC-227ea was the working fluid. This effort resulted in optimization of the centrifugal compressor impeller, diffuser, and shroud designs through extensive experimental testing. The detailed design of a magnetic bearing centrifugal compressor was completed. A prototype heat pump thermal control system was designed and fabricated which contained prototypical cold plate and condenser designs. This prototype system was extensively tested and demonstrated to measure performance parameters such as power consumption, cooling capacity, system size and mass, and other key parameters. Finally, the experimental performance was input into the theoretical trade study allowing for a comparison of the actual performance of the low-lift heat pump to a single-phase pumped loop. Inputting the experimental low-lift heat pump performance into the trade study showed that the low-lift heat pump still has lower system mass than the single-phase pumped loop for all space temperatures considered. The experimental results very closely match the theoretical results used in the trade study.

  6. West Valley demonstration project: alternative processes for solidifying the high-level wastes

    Energy Technology Data Exchange (ETDEWEB)

    Holton, L.K.; Larson, D.E.; Partain, W.L.; Treat, R.L.

    1981-10-01

    In 1980, the US Department of Energy (DOE) established the West Valley Solidification Project as the result of legislation passed by the US Congress. The purpose of this project was to carry out a high level nuclear waste management demonstration project at the Western New York Nuclear Service Center in West Valley, New York. The DOE authorized the Pacific Northwest Laboratory (PNL), which is operated by Battelle Memorial Institute, to assess alternative processes for treatment and solidification of the WNYNSC high-level wastes. The Process Alternatives Study is the suject of this report. Two pretreatment approaches and several waste form processes were selected for evaluation in this study. The two waste treatment approaches were the salt/sludge separation process and the combined waste process. Both terminal and interim waste form processes were studied.

  7. Starlight Demonstration of the Dragonfly Instrument: an Integrated Photonic Pupil Remapping Interferometer for High Contrast Imaging

    CERN Document Server

    Jovanovic, N; Norris, B; Gross, S; Stewart, P; Charles, N; Lacour, S; Ams, M; Lawrence, J S; Lehmann, A; Niel, C; Robertson, J G; Marshall, G D; Ireland, M; Fuerbach, A; Withford, M J

    2012-01-01

    In the two decades since the first extra-solar planet was discovered, the detection and characterization of extra-solar planets has become one of the key endeavors in all of modern science. Recently direct detection techniques such as interferometry or coronography have received growing attention because they reveal the population of exoplanets inaccessible to Doppler or transit techniques, and moreover they allow the faint signal from the planet itself to be investigated. Next-generation stellar interferometers are increasingly incorporating photonic technologies due to the increase in fidelity of the data generated. Here, we report the design, construction and commissioning of a new high contrast imager; the integrated pupil-remapping interferometer; an instrument we expect will find application in the detection of young faint companions in the nearest star-forming regions. The laboratory characterisation of the instrument demonstrated high visibility fringes on all interferometer baselines in addition to s...

  8. Demonstration of large field effect in topological insulator films via a high-κ back gate

    Science.gov (United States)

    Wang, C. Y.; Lin, H. Y.; Yang, S. R.; Chen, K. H. M.; Lin, Y. H.; Chen, K. H.; Young, L. B.; Cheng, C. K.; Fanchiang, Y. T.; Tseng, S. C.; Hong, M.; Kwo, J.

    2016-05-01

    The spintronics applications long anticipated for topological insulators (TIs) has been hampered due to the presence of high density intrinsic defects in the bulk states. In this work we demonstrate the back-gating effect on TIs by integrating Bi2Se3 films 6-10 quintuple layer (QL) thick with amorphous high-κ oxides of Al2O3 and Y2O3. Large gating effect of tuning the Fermi level EF to very close to the band gap was observed, with an applied bias of an order of magnitude smaller than those of the SiO2 back gate, and the modulation of film resistance can reach as high as 1200%. The dependence of the gating effect on the TI film thickness was investigated, and ΔN2D/ΔVg varies with TI film thickness as ˜t-0.75. To enhance the gating effect, a Y2O3 layer thickness 4 nm was inserted into Al2O3 gate stack to increase the total κ value to 13.2. A 1.4 times stronger gating effect is observed, and the increment of induced carrier numbers is in good agreement with additional charges accumulated in the higher κ oxides. Moreover, we have reduced the intrinsic carrier concentration in the TI film by doping Te to Bi2Se3 to form Bi2TexSe1-x. The observation of a mixed state of ambipolar field that both electrons and holes are present indicates that we have tuned the EF very close to the Dirac Point. These results have demonstrated that our capability of gating TIs with high-κ back gate to pave the way to spin devices of tunable EF for dissipationless spintronics based on well-established semiconductor technology.

  9. 3rd International Conference on High Performance Scientific Computing

    CERN Document Server

    Kostina, Ekaterina; Phu, Hoang; Rannacher, Rolf

    2008-01-01

    This proceedings volume contains a selection of papers presented at the Third International Conference on High Performance Scientific Computing held at the Hanoi Institute of Mathematics, Vietnamese Academy of Science and Technology (VAST), March 6-10, 2006. The conference has been organized by the Hanoi Institute of Mathematics, Interdisciplinary Center for Scientific Computing (IWR), Heidelberg, and its International PhD Program ``Complex Processes: Modeling, Simulation and Optimization'', and Ho Chi Minh City University of Technology. The contributions cover the broad interdisciplinary spectrum of scientific computing and present recent advances in theory, development of methods, and applications in practice. Subjects covered are mathematical modelling, numerical simulation, methods for optimization and control, parallel computing, software development, applications of scientific computing in physics, chemistry, biology and mechanics, environmental and hydrology problems, transport, logistics and site loca...

  10. Demonstration of nanoimprinted hyperlens array for high-throughput sub-diffraction imaging

    Science.gov (United States)

    Byun, Minsueop; Lee, Dasol; Kim, Minkyung; Kim, Yangdoo; Kim, Kwan; Ok, Jong G.; Rho, Junsuk; Lee, Heon

    2017-04-01

    Overcoming the resolution limit of conventional optics is regarded as the most important issue in optical imaging science and technology. Although hyperlenses, super-resolution imaging devices based on highly anisotropic dispersion relations that allow the access of high-wavevector components, have recently achieved far-field sub-diffraction imaging in real-time, the previously demonstrated devices have suffered from the extreme difficulties of both the fabrication process and the non-artificial objects placement. This results in restrictions on the practical applications of the hyperlens devices. While implementing large-scale hyperlens arrays in conventional microscopy is desirable to solve such issues, it has not been feasible to fabricate such large-scale hyperlens array with the previously used nanofabrication methods. Here, we suggest a scalable and reliable fabrication process of a large-scale hyperlens device based on direct pattern transfer techniques. We fabricate a 5 cm × 5 cm size hyperlenses array and experimentally demonstrate that it can resolve sub-diffraction features down to 160 nm under 410 nm wavelength visible light. The array-based hyperlens device will provide a simple solution for much more practical far-field and real-time super-resolution imaging which can be widely used in optics, biology, medical science, nanotechnology and other closely related interdisciplinary fields.

  11. The Three-Dimensional Architecture of the Internal Capsule of the Human Brain Demonstrated by Fiber Dissection Technique

    Directory of Open Access Journals (Sweden)

    Cristina Goga

    2015-01-01

    Full Text Available The fiber dissection technique involves peeling away white matter fiber tracts of the brain to display its three-dimensional anatomic arrangement. The intricate three-dimensional configuration and structure of the internal capsule (IC is not well defined. By using the fiber dissection technique, our aim was to expose and study the IC to achieve a clearer conception of its configuration and relationships with neighboring white matter fibers and central nuclei. The lateral and medial aspects of the temporal lobes of twenty, previously frozen, formalin-fixed human brains were dissected under the operating microscope using the fiber dissection technique.

  12. Expanded Hematopoietic Progenitor Cells Reselected for High Aldehyde Dehydrogenase Activity Demonstrate Islet Regenerative Functions.

    Science.gov (United States)

    Seneviratne, Ayesh K; Bell, Gillian I; Sherman, Stephen E; Cooper, Tyler T; Putman, David M; Hess, David A

    2016-04-01

    Human umbilical cord blood (UCB) hematopoietic progenitor cells (HPC) purified for high aldehyde dehydrogenase activity (ALDH(hi) ) stimulate islet regeneration after transplantation into mice with streptozotocin-induced β cell deletion. However, ALDH(hi) cells represent a rare progenitor subset and widespread use of UCB ALDH(hi) cells to stimulate islet regeneration will require progenitor cell expansion without loss of islet regenerative functions. Here we demonstrate that prospectively purified UCB ALDH(hi) cells expand efficiently under serum-free, xeno-free conditions with minimal growth factor supplementation. Consistent with the concept that ALDH-activity is decreased as progenitor cells differentiate, kinetic analyses over 9 days revealed the frequency of ALDH(hi) cells diminished as culture time progressed such that total ALDH(hi) cell number was maximal (increased 3-fold) at day 6. Subsequently, day 6 expanded cells (bulk cells) were sorted after culture to reselect differentiated progeny with low ALDH-activity (ALDH(lo) subset) from less differentiated progeny with high ALDH-activity (ALDH(hi) subset). The ALDH(hi) subset retained primitive cell surface marker coexpression (32.0% ± 7.0% CD34(+) /CD38(-) cells, 37.0% ± 6.9% CD34(+) /CD133(+) cells), and demonstrated increased hematopoietic colony forming cell function compared with the ALDH(lo) subset. Notably, bulk cells or ALDH(lo) cells did not possess the functional capacity to lower hyperglycemia after transplantation into streptozotocin-treated NOD/SCID mice. However, transplantation of the repurified ALDH(hi) subset significantly reduced hyperglycemia, improved glucose tolerance, and increased islet-associated cell proliferation and capillary formation. Thus, expansion and delivery of reselected UCB cells that retain high ALDH-activity after short-term culture represents an improved strategy for the development of cellular therapies to enhance islet regeneration in situ.

  13. ICT Demonstration

    DEFF Research Database (Denmark)

    Jensen, Tine Wirenfeldt; Bay, Gina

    In this demonstration we present and discuss two interrelated on-line learning resources aimed at supporting international students at Danish universities in building study skills (the Study Metro) and avoiding plagiarism (Stopplagiarism). We emphasize the necessity of designing online learning r...

  14. Internal hysteresis experienced on a high pressure syn gas compressor

    Science.gov (United States)

    Zeidan, F. Y.

    1984-01-01

    A vibration instability phenomenon experienced in operating high pressure syn gas centrifugal compressors in two ammonia plants is described. The compressors were monitored by orbit and spectrum analysis for changes from baseline readings. It is found that internal hysteresis was the major destabilizing force; however, the problem was further complicated by seal lockup at the suction end of the compressor. A coupling lockup problem and a coupling fit problem, which frettage of the shaft, are also considered as contributors to the self excited vibrations.

  15. Delusions of expertise: the high standard of proof needed to demonstrate skills at horserace handicapping.

    Science.gov (United States)

    Browne, Matthew; Rockloff, Matthew J; Blaszcynski, Alex; Allcock, Clive; Windross, Allen

    2015-03-01

    Gamblers who participate in skill-oriented games (such as poker and sports-betting) are motivated to win over the long-term, and some monitor their betting outcomes to evaluate their performance and proficiency. In this study of Australian off-track horserace betting, we investigated which levels of sustained returns would be required to establish evidence of skill/expertise. We modelled a random strategy to simulate 'naïve' play, in which equal bets were placed on randomly selected horses using a representative sample of 211 weekend races. Results from a Monte Carlo simulation yielded a distribution of return-on-investments for varying number of bets (N), showing surprising volatility, even after a large number of repeated bets. After adjusting for the house advantage, a gambler would have to place over 10,000 bets in individual races with net returns exceeding 9 % to be reasonably considered an expert punter (α = .05). Moreover, a record of fewer bets would require even greater returns for demonstrating expertise. As such, validated expertise is likely to be rare among race bettors. We argue that the counter-intuitively high threshold for demonstrating expertise by tracking historical performance is likely to exacerbate known cognitive biases in self-evaluation of expertise.

  16. Preliminary Demonstration Reactor Point Design for the Fluoride Salt-Cooled High-Temperature Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Qualls, A. L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Betzler, Benjamin R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Brown, Nicholas R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Carbajo, Juan [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Greenwood, Michael Scott [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Hale, Richard Edward [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Harrison, Thomas J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Powers, Jeffrey J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Robb, Kevin R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Terrell, Jerry W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2015-12-01

    Development of the Fluoride Salt-Cooled High-Temperature Reactor (FHR) Demonstration Reactor (DR) is a necessary intermediate step to enable commercial FHR deployment through disruptive and rapid technology development and demonstration. The FHR DR will utilize known, mature technology to close remaining gaps to commercial viability. Lower risk technologies are included in the initial FHR DR design to ensure that the reactor can be built, licensed, and operated within an acceptable budget and schedule. These technologies include tristructural-isotropic (TRISO) particle fuel, replaceable core structural material, the use of that same material for the primary and intermediate loops, and tube-and-shell heat exchangers. This report provides an update on the development of the FHR DR. At this writing, the core neutronics and thermal hydraulics have been developed and analyzed. The mechanical design details are still under development and are described to their current level of fidelity. It is anticipated that the FHR DR can be operational within 10 years because of the use of low-risk, near-term technology options.

  17. Demonstrating a directional detector based on neon for characterizing high energy neutrons

    CERN Document Server

    Hexley, A; Spitz, J; Conrad, J M

    2015-01-01

    MITPC is a gas-based time projection chamber used for detecting fast, MeV-scale neutrons. The standard version of the detector relies on a mixture of 600~torr gas composed of 87.5% $^4$He and 12.5% CF$_4$ for precisely measuring the energy and direction of neutron-induced nuclear recoils. We describe studies performed with a prototype detector investigating the use of Ne, as a replacement for $^4$He, in the gas mixture. Our discussion focuses on the advantages of Ne as the fast neutron target for high energy neutron events ($\\lesssim$100 MeV) and a demonstration that the mixture will be effective for this event class. We find that the achievable gain and transverse diffusion of drifting electrons in the Ne mixture are acceptable and that the detector uptime lost due to voltage breakdowns in the amplification plane is negligible, compared to $\\sim$ 20% with the $^4$He mixture.

  18. High Density Hydrogen Storage System Demonstration Using NaAlH4 Based Complex Compound Hydrides

    Energy Technology Data Exchange (ETDEWEB)

    Daniel A. Mosher; Xia Tang; Ronald J. Brown; Sarah Arsenault; Salvatore Saitta; Bruce L. Laube; Robert H. Dold; Donald L. Anton

    2007-07-27

    This final report describes the motivations, activities and results of the hydrogen storage independent project "High Density Hydrogen Storage System Demonstration Using NaAlH4 Based Complex Compound Hydrides" performed by the United Technologies Research Center under the Department of Energy Hydrogen Program, contract # DE-FC36-02AL67610. The objectives of the project were to identify and address the key systems technologies associated with applying complex hydride materials, particularly ones which differ from those for conventional metal hydride based storage. This involved the design, fabrication and testing of two prototype systems based on the hydrogen storage material NaAlH4. Safety testing, catalysis studies, heat exchanger optimization, reaction kinetics modeling, thermochemical finite element analysis, powder densification development and material neutralization were elements included in the effort.

  19. Operating experience during high-level waste vitrification at the West Valley Demonstration Project

    Energy Technology Data Exchange (ETDEWEB)

    Valenti, P.J.; Elliott, D.I.

    1999-01-01

    This report provides a summary of operational experiences, component and system performance, and lessons learned associated with the operation of the Vitrification Facility (VF) at the West Valley Demonstration Project (WVDP). The VF was designed to convert stored high-level radioactive waste (HLW) into a stable waste form (borosilicate glass) suitable for disposal in a federal repository. Following successful completion on nonradioactive test, HLW processing began in July 1995. Completion of Phase 1 of HLW processing was reached on 10 June 1998 and represented the processing of 9.32 million curies of cesium-137 (Cs-137) and strontium-90 (Sr-90) to fill 211 canisters with over 436,000 kilograms of glass. With approximately 85% of the total estimated curie content removed from underground waste storage tanks during Phase 1, subsequent operations will focus on removal of tank heel wastes.

  20. Demonstrating a directional detector based on neon for characterizing high energy neutrons

    Science.gov (United States)

    Hexley, Allie

    2016-03-01

    MITPC is a gas-based time projection chamber used for detecting fast, MeV-scale neutrons. The standard version of the detector relies on a mixture of 600 torr gas composed of 87.5% helium-4 and 12.5% tetrafluoromethane for precisely measuring the energy and direction of neutron-induced nuclear recoils. I describe studies performed with a prototype detector investigating the use of neon, as a replacement for helium-4, in the gas mixture. My discussion focuses on the advantages of neon as the fast neutron target for high energy neutron events (100 MeV) and a demonstration that the mixture will be effective for this event class. I show that the achievable gain and transverse diffusion of drifting electrons in the neon mixture are acceptable and that the detector uptime lost due to voltage breakdowns in the amplification plane is negligible, compared to 20% with the helium-4 mixture.

  1. Microflow1, a sheathless fiber-optic flow cytometry biomedical platform: demonstration onboard the international space station.

    Science.gov (United States)

    Dubeau-Laramée, Geneviève; Rivière, Christophe; Jean, Isabelle; Mermut, Ozzy; Cohen, Luchino Y

    2014-04-01

    A fiber-optic based flow cytometry platform was designed to build a portable and robust instrument for space applications. At the core of the Microflow1 is a unique fiber-optic flow cell fitted to a fluidic system and fiber coupled to the source and detection channels. A Microflow1 engineering unit was first tested and benchmarked against a commercial flow cytometer as a reference in a standard laboratory environment. Testing in parabolic flight campaigns was performed to establish Microflow1's performance in weightlessness, before operating the new platform on the International Space Station. Microflow1 had comparable performances to commercial systems, and operated remarkably and robustly in weightlessness (microgravity). Microflow1 supported immunophenotyping as well as microbead-based multiplexed cytokine assays in the space environment and independently of gravity levels. Results presented here provide evidence that this fiber-optic cytometer technology is inherently compatible with the space environment with negligible compromise to analytical performance.

  2. In-flight simulators and fly-by-wirelight demonstrators a historical account of international aeronautical research

    CERN Document Server

    2017-01-01

    This book offers the first complete account of more than sixty years of international research on In-Flight Simulation and related development of electronic and electro-optic flight control system technologies (“Fly-by-Wire” and “Fly-by-Light”). They have provided a versatile and experimental procedure that is of particular importance for verification, optimization, and evaluation of flying qualities and flight safety of manned or unmanned aircraft systems. Extensive coverage is given in the book to both fundamental information related to flight testing and state-of-the-art advances in the design and implementation of electronic and electro-optic flight control systems, which have made In-Flight Simulation possible. Written by experts, the respective chapters clearly show the interdependence between various aeronautical disciplines and in-flight simulation methods. Taken together, they form a truly multidisciplinary book that addresses the needs of not just flight test engineers, but also other aerona...

  3. Waveguide Power Combiner Demonstration for Multiple High Power Millimeter Wave TWTAs

    Science.gov (United States)

    Wintucky, Edwin G.; Simons, Rainee N.; Lesny, Gary G.; Glass, Jeffrey L.

    2004-01-01

    NASA is presently developing nuclear reactor technologies, under Project Prometheus, which will provide spacecraft with greatly increased levels of sustained onboard power and thereby dramatically enhance the capability for future deep space exploration. The first mission planned for use of this high power technology is the Jupiter Icy Moons Orbiter (JIMO). In addition to electric propulsion and science, there will also be unprecedented onboard power available for deep space communications. A 32 GHz transmitter with 1 kW of RF output power is being considered to enable the required very high data transmission rates. One approach to achieving the 1 kW RF power, now being investigated at NASA GRC, is the possible power combining of a number of 100-1 50 W TWTs now under development. The work presented here is the results of a proof-of-concept demonstration of the power combining Ka-band waveguide circuit design and test procedure using two Ka- band TWTAs (Varian model VZA6902V3 and Logimetrics model A440/KA-1066), both of which were previously employed in data uplink evaluation terminals at 29.36 GHz for the NASA Advanced Communications Technology Satellite (ACTS) program. The characterization of the individual TWTAs and power combining demonstration were done over a 500 MHz bandwidth from 29.1 to 29.6 GHz to simulate the Deep Space Network (DSN) bandwidth of 3 1.8 to 32.3 GHz. Figures 1-3 show some of the power transfer and gain measurements of the TWTAs using a swept signal generator (Agilent 83640b) for the RF input. The input and output powers were corrected for circuit insertion losses due to the waveguide components. The RF saturated powers of both ACTS TWTAs were on the order of 120 W, which is comparable to the expected output powers of the 32 GHz TWTs. Additional results for the individual TWTAs will be presented (AM/AM, AM/PM conversion and gain compression), some of which were obtained from swept frequency and power measurements using a vector network

  4. Demonstration of high current carbon nanotube enabled vertical organic field effect transistors at industrially relevant voltages

    Science.gov (United States)

    McCarthy, Mitchell

    lifetime and the potential for an all transparent display. And because carbon nanotubes (CNTs) and organics are used, CN-VFET and CN-VOLET devices are compatible with flexible displays. This dissertation describes the first ever demonstration of CN-VFETs and CN-VOLETs and relates their performance to the specific properties of the CNTs and the new device architecture. In the work that followed, the CN-VFET was systematically optimized overcoming the problems revealed in the demonstration devices. The large undesired hysteresis was decreased by 96%, the on/off ratio was improved three orders of magnitude and the operating voltages were reduced to state of the art values. Additionally, the current output per device area of the CN-VFET was demonstrated to be greater than any other low resolution patterned organic transistor by a factor of 3.9. Moreover, it was demonstrated that the CNTs induce a reorientation of the high mobility plane in small molecule organics like pentacene to coincide with the vertical direction, giving additional explanation for the large currents observed in the CN-VFET. The ability to drive high currents and potentially inexpensive fabrication may provide the solution for the AMOLED backplane problem.

  5. International joint development for demonstration by NEDO. `Research for demonstration of a solar power/micro hydro power bybrid system`; NEDO kokusai kyodo jissho kaihatsu `taiyoko micro suiryoku hybrid system jissho kenkyu`

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-01-10

    As part of the international joint development for demonstration by the New Energy and Industrial Technology Development Organization (NEDO) in fiscal 1997, a `research for demonstration of a solar power/micro hydro power bybrid system` was commissioned. A hybrid system was structured, which consists of a 100-kW class photovoltaic power generating equipment, a 25-kW class micro-hydro power generating equipment, and a battery set to store surplus power. Construction for system installation to perform demonstration operation was launched in Trang Village, Nang Yang Prefecture, Vietnam. This demonstration research is scheduled to execute system design and fabrication as well as the foundation construction for system installation in fiscal 1998, and the installation and adjustment will be completed by some time in the summer of 1999. Thereafter, demonstration operation will be performed for about two years with an objective to evaluate complementary relationship between the photovoltaic power generation and the micro-hydro power generation, the system economy, and electric power quality. (NEDO)

  6. International joint development for demonstration by NEDO. 'Research for demonstration of a solar power/micro hydro power bybrid system'. NEDO kokusai kyodo jissho kaihatsu 'taiyoko micro suiryoku hybrid system jissho kenkyu'

    Energy Technology Data Exchange (ETDEWEB)

    1999-01-10

    As part of the international joint development for demonstration by the New Energy and Industrial Technology Development Organization (NEDO) in fiscal 1997, a 'research for demonstration of a solar power/micro hydro power bybrid system' was commissioned. A hybrid system was structured, which consists of a 100-kW class photovoltaic power generating equipment, a 25-kW class micro-hydro power generating equipment, and a battery set to store surplus power. Construction for system installation to perform demonstration operation was launched in Trang Village, Nang Yang Prefecture, Vietnam. This demonstration research is scheduled to execute system design and fabrication as well as the foundation construction for system installation in fiscal 1998, and the installation and adjustment will be completed by some time in the summer of 1999. Thereafter, demonstration operation will be performed for about two years with an objective to evaluate complementary relationship between the photovoltaic power generation and the micro-hydro power generation, the system economy, and electric power quality. (NEDO)

  7. High-Lift Propeller Noise Prediction for a Distributed Electric Propulsion Flight Demonstrator

    Science.gov (United States)

    Nark, Douglas M.; Buning, Pieter G.; Jones, William T.; Derlaga, Joseph M.

    2017-01-01

    Over the past several years, the use of electric propulsion technologies within aircraft design has received increased attention. The characteristics of electric propulsion systems open up new areas of the aircraft design space, such as the use of distributed electric propulsion (DEP). In this approach, electric motors are placed in many different locations to achieve increased efficiency through integration of the propulsion system with the airframe. Under a project called Scalable Convergent Electric Propulsion Technology Operations Research (SCEPTOR), NASA is designing a flight demonstrator aircraft that employs many "high-lift propellers" distributed upstream of the wing leading edge and two cruise propellers (one at each wingtip). As the high-lift propellers are operational at low flight speeds (take-off/approach flight conditions), the impact of the DEP configuration on the aircraft noise signature is also an important design consideration. This paper describes efforts toward the development of a mulit-fidelity aerodynamic and acoustic methodology for DEP high-lift propeller aeroacoustic modeling. Specifically, the PAS, OVERFLOW 2, and FUN3D codes are used to predict the aerodynamic performance of a baseline high-lift propeller blade set. Blade surface pressure results from the aerodynamic predictions are then used with PSU-WOPWOP and the F1A module of the NASA second generation Aircraft NOise Prediction Program to predict the isolated high-lift propeller noise source. Comparisons of predictions indicate that general trends related to angle of attack effects at the blade passage frequency are captured well with the various codes. Results for higher harmonics of the blade passage frequency appear consistent for the CFD based methods. Conversely, evidence of the need for a study of the effects of increased azimuthal grid resolution on the PAS based results is indicated and will be pursued in future work. Overall, the results indicate that the computational

  8. Demonstration of sulfur solubility determinations in high waste loading, low-activity waste glasses

    Energy Technology Data Exchange (ETDEWEB)

    Fox, K. M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-04-25

    A method recommended by Pacific Northwest National Laboratory (PNNL) for sulfate solubility determinations in simulated low-activity waste glasses was demonstrated using three compositions from a recent Hanford high waste loading glass study. Sodium and sulfate concentrations in the glasses increased after each re-melting step. Visual observations of the glasses during the re-melting process reflected the changes in composition. The measured compositions showed that the glasses met the targeted values. The amount of SO3 retained in the glasses after washing was relatively high, ranging from 1.6 to 2.6 weight percent (wt %). Measured SnO2 concentrations were notably low in all of the study glasses. The composition of the wash solutions should be measured in future work to determine whether SnO2 is present with the excess sulfate washed from the glass. Increases in batch size and the amount of sodium sulfate added did not have a measureable impact on the amount of sulfate retained in the glass, although this was tested for only a single glass composition. A batch size of 250 g and a sodium sulfate addition targeting 7 wt %, as recommended by PNNL, will be used in future experiments.

  9. Demonstration of real-time pattern correction for high-throughput maskless lithography

    Science.gov (United States)

    Hakkennes, E. A.; Wiersma, A. D.; Hoving, M.; Venema, N.; Woutersen, S.; van de Peut, T.; Sanderse, M.; Wieland, M. J.

    2011-04-01

    MAPPER Lithography is developing a maskless lithography technology based on massively-parallel electron-beam writing with high speed optical data transport for switching the electron beams. In this way electron optical columns can be made with a throughput of 10 wafers per hour. The amount of data for each 26mm x 33mm field is 8 Tbyte. The data rate is approximately 3 Tbyte per second. In order to realize overlay the patterns for different fields on the wafer need to be slightly adjusted. Additionally it is beneficial for the electron optics design to be able to correct a number of tool parameters on the data. For this it is desirable to be able to correct the pattern data in real time. By implementing the correction algorithms on an FPGA test board it has been demonstrated that it is possible to perform the corrections on the exposed data real time. By using a pixel size of 3.5nm, a CDu and overlay contribution of smaller than 1nm 3s is obtained. A datapath for 10wph based on an FPGA implementation that stores the switching data uncompressed in DRAM fits in 4 racks of 2 meters high, with a footprint of 600mm x 700mm each. By replacing the FPGA by an ASIC implementation, and by using real time decompression, the footprint can be reduced in a later stage.

  10. Surprise responses in the human brain demonstrate statistical learning under high concurrent cognitive demand

    Science.gov (United States)

    Garrido, Marta Isabel; Teng, Chee Leong James; Taylor, Jeremy Alexander; Rowe, Elise Genevieve; Mattingley, Jason Brett

    2016-06-01

    The ability to learn about regularities in the environment and to make predictions about future events is fundamental for adaptive behaviour. We have previously shown that people can implicitly encode statistical regularities and detect violations therein, as reflected in neuronal responses to unpredictable events that carry a unique prediction error signature. In the real world, however, learning about regularities will often occur in the context of competing cognitive demands. Here we asked whether learning of statistical regularities is modulated by concurrent cognitive load. We compared electroencephalographic metrics associated with responses to pure-tone sounds with frequencies sampled from narrow or wide Gaussian distributions. We showed that outliers evoked a larger response than those in the centre of the stimulus distribution (i.e., an effect of surprise) and that this difference was greater for physically identical outliers in the narrow than in the broad distribution. These results demonstrate an early neurophysiological marker of the brain's ability to implicitly encode complex statistical structure in the environment. Moreover, we manipulated concurrent cognitive load by having participants perform a visual working memory task while listening to these streams of sounds. We again observed greater prediction error responses in the narrower distribution under both low and high cognitive load. Furthermore, there was no reliable reduction in prediction error magnitude under high-relative to low-cognitive load. Our findings suggest that statistical learning is not a capacity limited process, and that it proceeds automatically even when cognitive resources are taxed by concurrent demands.

  11. Demonstration of novel high-power acoustic through-the-wall sensor

    CERN Document Server

    Felber, Franklin

    2015-01-01

    A high-power acoustic sensor, capable of detecting and tracking persons through steel walls of cargo containers, trailer truck bodies, and train cars, has been developed and demonstrated. The sensor is based on a new concept for narrowband mechanical-impact acoustic transmitters and matched resonant receivers. The lightweight, compact, and low-cost transmitters produce high-power acoustic pulses at one or more discrete frequencies with little input power. The energy for each pulse is accumulated over long times at low powers, like a mousetrap, and therefore can be operated with ordinary batteries and no power conditioning. A breadboard impact-transmitter and matched-receiver system that detected human motion through thick walls with only rudimentary signal processing is described, and results are presented. A conceptual design is presented of an acoustic through-the-wall sensor, costing about $10,000 per unit and capable of remotely and non-intrusively scanning steel cargo containers for stowaways at a rate o...

  12. International Discussion Meeting on High-Tc Superconductors

    CERN Document Server

    1988-01-01

    In the past two years conferences on superconductivity have been characterized by the attendance of hundreds of scientists. Consequently, the organizers were forced to schedule numerous parallel sessions and poster presentations with an almost unsurveyable amount of information. It was, therefore, felt that a more informal get-together, providing ample time for a thourough discussion of some topics of current interest in high-temperature superconductivity, was timely and benefitial for leading scientists as well as for newcomers in the field. The present volume contains the majority of papers presented at the International Discussion Meeting on High-Tc Superconductors held at the Mauterndorf Castle in the Austrian Alps from February 7 to 11, 1988. Each subject was introduced in review form by a few invited speakers and then discussed together with the contributed poster presentations. These discussion sessions chaired by selected scientists turned out to be the highlights of the meeting, not only because all ...

  13. Modeling Weather in the Ionosphere using the Navy's Highly Integrated Thermosphere and Ionosphere Demonstration System (HITIDES)

    Science.gov (United States)

    McDonald, S. E.; Sassi, F.; Zawdie, K.; McCormack, J. P.; Coker, C.; Huba, J.; Krall, J.

    2016-12-01

    The Naval Research Laboratory (NRL) has recently developed a ground-to-space atmosphere-ionosphere prediction capability, the Highly Integrated Thermosphere and Ionosphere Demonstration System (HITIDES). HITIDES is the U.S. Navy's first coupled, physics-based, atmosphere-ionosphere model, one in which the atmosphere extends from the ground to the exobase ( 500 km altitude) and the ionosphere reaches several 10,000 km in altitude. HITIDES has been developed by coupling the extended version of the Whole Atmosphere Community Climate Model (WACCM-X) with NRL's ionospheric model, Sami3 is Another Model of the Ionosphere (SAMI3). Integrated into this model are the effects of drivers from atmospheric weather (day-to-day meteorology), the Sun, and the changing high altitude composition. To simulate specific events, HITIDES can be constrained by data analysis products or observations. We have performed simulations of the ionosphere during January-February 2010 in which lower atmospheric weather patterns have been introduced using the Navy Operational Global Atmospheric Prediction System-Advanced Level Physics High Altitude (NOGAPS-ALPHA) data assimilation products. The same time period has also been simulated using the new atmospheric forecast model, the NAVy Global Environmental Model (NAVGEM), which has replaced NOGAPS-ALPHA. The two simulations are compared with each other and with observations of the low latitude ionosphere. We will discuss the importance of including lower atmospheric meteorology in ionospheric simulations to capture day-to-day variability as well as large-scale longitudinal structure in the low-latitude ionosphere. In addition, we examine the effect of the variability on HF radio wave propagation by comparing simulated ionograms calculated from the HITIDES ionospheric specifications to ionosonde measurements.

  14. Fluoride Salt-Cooled High-Temperature Demonstration Reactor Point Design

    Energy Technology Data Exchange (ETDEWEB)

    Qualls, A. L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Brown, Nicholas R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Betzler, Benjamin R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Carbajo, Juan [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Hale, Richard Edward [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Harrison, Thomas J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Powers, Jeffrey J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Robb, Kevin R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Terrell, Jerry W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Wysocki, Aaron J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-02-01

    The fluoride salt-cooled high-temperature reactor (FHR) demonstration reactor (DR) is a concept for a salt-cooled reactor with 100 megawatts of thermal output (MWt). It would use tristructural-isotropic (TRISO) particle fuel within prismatic graphite blocks. FLiBe (2 LiF-BeF2) is the reference primary coolant. The FHR DR is designed to be small, simple, and affordable. Development of the FHR DR is a necessary intermediate step to enable near-term commercial FHRs. Lower risk technologies are purposely included in the initial FHR DR design to ensure that the reactor can be built, licensed, and operated within an acceptable budget and schedule. These technologies include TRISO particle fuel, replaceable core structural material, the use of that same material for the primary and intermediate loops, and tube-and-shell primary-to-intermediate heat exchangers. Several preconceptual and conceptual design efforts that have been conducted on FHR concepts bear a significant influence on the FHR DR design. Specific designs include the Oak Ridge National Laboratory (ORNL) advanced high-temperature reactor (AHTR) with 3400/1500 MWt/megawatts of electric output (MWe), as well as a 125 MWt small modular AHTR (SmAHTR) from ORNL. Other important examples are the Mk1 pebble bed FHR (PB-FHR) concept from the University of California, Berkeley (UCB), and an FHR test reactor design developed at the Massachusetts Institute of Technology (MIT). The MIT FHR test reactor is based on a prismatic fuel platform and is directly relevant to the present FHR DR design effort. These FHR concepts are based on reasonable assumptions for credible commercial prototypes. The FHR DR concept also directly benefits from the operating experience of the Molten Salt Reactor Experiment (MSRE), as well as the detailed design efforts for a large molten salt reactor concept and its breeder variant, the Molten Salt Breeder Reactor. The FHR DR technology is most representative of the 3400 MWt AHTR

  15. Demonstration of a Fiber Optic Regression Probe in a High-Temperature Flow

    Science.gov (United States)

    Korman, Valentin; Polzin, Kurt

    2011-01-01

    empirically anchoring any analysis geared towards lifetime qualification. Erosion rate data over an operating envelope could also be useful in the modeling detailed physical processes. The sensor has been embedded in many regressing media to demonstrate the capabilities in a number of regressing environments. In the present work, sensors were installed in the eroding/regressing throat region of a converging-diverging flow, with the working gas heated to high temperatures by means of a high-pressure arc discharge at steady-state discharge power levels up to 500 kW. The amount of regression observed in each material sample was quantified using a later profilometer, which was compared to the in-situ erosion measurements to demonstrate the efficacy of the measurement technique in very harsh, high-temperature environments.

  16. Demonstrating the capability of the high-performance plasmonic gallium-graphene couple.

    Science.gov (United States)

    Losurdo, Maria; Yi, Congwen; Suvorova, Alexandra; Rubanov, Sergey; Kim, Tong-Ho; Giangregorio, Maria M; Jiao, Wenyuan; Bergmair, Iris; Bruno, Giovanni; Brown, April S

    2014-03-25

    Metal nanoparticle (NP)-graphene multifunctional platforms are of great interest for exploring strong light-graphene interactions enhanced by plasmons and for improving performance of numerous applications, such as sensing and catalysis. These platforms can also be used to carry out fundamental studies on charge transfer, and the findings can lead to new strategies for doping graphene. There have been a large number of studies on noble metal Au-graphene and Ag-graphene platforms that have shown their potential for a number of applications. These studies have also highlighted some drawbacks that must be overcome to realize high performance. Here we demonstrate the promise of plasmonic gallium (Ga) nanoparticle (NP)-graphene hybrids as a means of modulating the graphene Fermi level, creating tunable localized surface plasmon resonances and, consequently, creating high-performance surface-enhanced Raman scattering (SERS) platforms. Four prominent peculiarities of Ga, differentiating it from the commonly used noble (gold and silver) metals are (1) the ability to create tunable (from the UV to the visible) plasmonic platforms, (2) its chemical stability leading to long-lifetime plasmonic platforms, (3) its ability to n-type dope graphene, and (4) its weak chemical interaction with graphene, which preserves the integrity of the graphene lattice. As a result of these factors, a Ga NP-enhanced graphene Raman intensity effect has been observed. To further elucidate the roles of the electromagnetic enhancement (or plasmonic) mechanism in relation to electron transfer, we compare graphene-on-Ga NP and Ga NP-on-graphene SERS platforms using the cationic dye rhodamine B, a drug model biomolecule, as the analyte.

  17. ARC: A compact, high-field, disassemblable fusion nuclear science facility and demonstration power plant

    Science.gov (United States)

    Sorbom, Brandon; Ball, Justin; Palmer, Timothy; Mangiarotti, Franco; Sierchio, Jennifer; Bonoli, Paul; Kasten, Cale; Sutherland, Derek; Barnard, Harold; Haakonsen, Christian; Goh, Jon; Sung, Choongki; Whyte, Dennis

    2014-10-01

    The Affordable, Robust, Compact (ARC) reactor conceptual design aims to reduce the size, cost, and complexity of a combined Fusion Nuclear Science Facility (FNSF) and demonstration fusion pilot power plant. ARC is a 270 MWe tokamak reactor with a major radius of 3.3 m, a minor radius of 1.1 m, and an on-axis magnetic field of 9.2 T. ARC has Rare Earth Barium Copper Oxide (REBCO) superconducting toroidal field coils with joints to allow disassembly, allowing for removal and replacement of the vacuum vessel as a single component. Inboard-launched current drive of 25 MW LHRF power and 13.6 MW ICRF power is used to provide a robust, steady state core plasma far from disruptive limits. ARC uses an all-liquid blanket, consisting of low pressure, slowly flowing Fluorine Lithium Beryllium (FLiBe) molten salt. The liquid blanket acts as a working fluid, coolant, and tritium breeder, and minimizes the solid material that can become activated. The large temperature range over which FLiBe is liquid permits blanket operation at 800-900 K with single phase fluid cooling and allows use of a high-efficiency Brayton cycle for electricity production in the secondary coolant loop.

  18. 5th International Conference on High Performance Scientific Computing

    CERN Document Server

    Hoang, Xuan; Rannacher, Rolf; Schlöder, Johannes

    2014-01-01

    This proceedings volume gathers a selection of papers presented at the Fifth International Conference on High Performance Scientific Computing, which took place in Hanoi on March 5-9, 2012. The conference was organized by the Institute of Mathematics of the Vietnam Academy of Science and Technology (VAST), the Interdisciplinary Center for Scientific Computing (IWR) of Heidelberg University, Ho Chi Minh City University of Technology, and the Vietnam Institute for Advanced Study in Mathematics. The contributions cover the broad interdisciplinary spectrum of scientific computing and present recent advances in theory, development of methods, and practical applications. Subjects covered include mathematical modeling; numerical simulation; methods for optimization and control; parallel computing; software development; and applications of scientific computing in physics, mechanics and biomechanics, material science, hydrology, chemistry, biology, biotechnology, medicine, sports, psychology, transport, logistics, com...

  19. DEMONSTRATION AND EVALUATION OF POTENTIAL HIGH LEVEL WASTE MELTER DECONTAMINATION TECHNOLOGIES FOR SAVANNAH RIVER SITE

    Energy Technology Data Exchange (ETDEWEB)

    Weger, Hans, Ph.D.; Kodanda, Raja Tilek Meruva; Mazumdar, Anindra; Srivastava, Rajiv Ph.D.; Ebadian, M.A. Ph.D.

    2003-02-27

    Four hand-held tools were tested for failed high-level waste melter decontamination and decommissioning (D&D). The forces felt by the tools during operation were measured using a tri-axial accelerometer since they will be operated by a remote manipulator. The efficiency of the tools was also recorded. Melter D&D consists of three parts: (1) glass fracturing: removing from the furnace the melted glass that can not be poured out through normal means, (2) glass cleaning: removing the thin layer of glass that has formed over the surface of the refractory material, and (3) K-3 refractory breakup: removing the K-3 refractory material. Surrogate glass, from a formula provided by the Savannah River Site, was melted in a furnace and poured into steel containers. K-3 refractory material, the same material used in the Defense Waste Processing Facility, was utilized for the demonstrations. Four K-3 blocks were heated at 1150 C for two weeks with a glass layer on top to simulate the hardened glass layer on the refractory surface in the melter. Tools chosen for the demonstrations were commonly used D&D tools, which have not been tested specifically for the different aspects of melter D&D. A jackhammer and a needle gun were tested for glass fracturing; a needle gun and a rotary grinder with a diamond face wheel (diamond grinder) were tested for glass cleaning; and a jackhammer, diamond grinder, and a circular saw with a diamond blade were tested for refractory breakup. The needle gun was not capable of removing or fracturing the surrogate glass. The diamond grinder only had a removal rate of 3.0 x 10-4 kg/s for K-3 refractory breakup and needed to be held firmly against the material. However, the diamond grinder was effective for glass cleaning, with a removal rate of 3.9 cm2/s. The jackhammer was successful in fracturing glass and breaking up the K-3 refractory block. The jackhammer had a glass-fracturing rate of 0.40 kg/s. The jackhammer split the K-3 refractory block into two

  20. Experimental Demonstration of Advanced Palladium Membrane Separators for Central High Purity Hydrogen Production

    Energy Technology Data Exchange (ETDEWEB)

    Sean Emerson; Neal Magdefrau; Susanne Opalka; Ying She; Catherine Thibaud-Erkey; Thoman Vanderspurt; Rhonda Willigan

    2010-06-30

    The overall objectives for this project were to: (1) confirm the high stability and resistance of a PdCu trimetallic alloy to carbon and carbide formation and, in addition, resistance to sulfur, halides, and ammonia; (2) develop a sulfur, halide, and ammonia resistant alloy membrane with a projected hydrogen permeance of 25 m{sup 3}m{sup -2}atm{sup -0.5}h{sup -1} at 400 C and capable of operating at pressures of 12.1 MPa ({approx}120 atm, 1750 psia); and (3) construct and experimentally validate the performance of 0.1 kg/day H{sup 2} PdCu trimetallic alloy membrane separators at feed pressures of 2 MPa (290 psia) in the presence of H{sub 2}S, NH{sub 3}, and HCl. This project successfully increased the technology readiness level of palladium-based metallic membranes for hydrogen separation from coal-biomass gasifier exhaust or similar hydrogen-containing gas streams. The reversible tolerance of palladium-copper (PdCu) alloys was demonstrated for H{sub 2}S concentrations varying from 20 ppmv up to 487 ppmv and NH{sub 3} concentrations up to 9 ppmv. In addition, atomistic modeling validated the resistance of PdCu alloys to carbon formation, irreversible sulfur corrosion, and chlorine attack. The experimental program highlighted two key issues which must be addressed as part of future experimental programs: (1) tube defects and (2) non-membrane materials of construction. Four out of five FCC PdCu separators developed leaks during the course of the experimental program because {approx}10% of the alloy tubes contained a single defect that resulted in a thin, weak point in the tube walls. These defects limited operation of the existing tubes to less than 220 psig. For commercial applications of a PdCu alloy hydrogen separator under high sulfur concentrations, it was determined that stainless steel 316 is not suitable for housing or supporting the device. Testing with sulfur concentrations of 487 {+-} 4 ppmv resulted in severe corrosion of the stainless steel components of

  1. Lung parenchyma changes in ankylosing spondylitis: demonstration with high resolution CT and correlation with disease duration

    Energy Technology Data Exchange (ETDEWEB)

    Senocak, Oezlem E-mail: emine.senocak@deu.edu.tr; Manisali, Metin; Oezaksoy, Dinc; Sevinc, Can; Akalin, Elif

    2003-02-01

    Objective: To analyze the spectrum of the lung parenchyma changes in ankylosing spondylitis (AS) with high resolution computed tomography (HRCT) and correlate the findings with disease duration. Material and methods: Twenty patients (18 male, 2 female) with the diagnosis of AS according to New York criteria were included in the study. None of the patients had history of tuberculosis, prolonged inorganic dust exposure and hospitalization for pneumonia. Seven of the patients were smokers, three patients were ex-smokers, and 10 patients were nonsmokers. The patients were assigned to three groups depending on disease duration. Group 1: patients with disease duration {<=}5 years (n: four patients), group 2: patients with disease duration {>=}6 years but {<=}10 years (n: four patients), group 3: patients with disease duration {>=}11 years (n: 12 patients). HRCT and pulmonary function tests (PFT) were performed in all patients. Results: HRCT demonstrated pathology in 17 patients (85%). Two patients in group 1, 4 patients in group 2 and 11 patients in group 3 had pulmonary parenchyma changes. Emphysema (9/20), septal thickening (9/20) and pleural thickening (9/20) were the most common changes followed by nodule (8/20) and subpleural band formation (7/20). Three patients had apical fibrosis (AF). Septal and pleural thickening (both 4/10) were the most common changes when only nonsmokers were considered. Among nine patients with emphysema three were nonsmokers. Conclusion: There is a wide spectrum in pulmonary parenchyma changes in AS. These changes begin in early stages of the disease and increase with disease duration. Although smoking complicates the spectrum of changes in pulmonary parenchyma, they are predominately in the form of interstitial inflammation.

  2. Bronchial reactivity in hyperresponsive patients and healthy individuals: demonstration with high resolution computed tomography

    Energy Technology Data Exchange (ETDEWEB)

    Schueller, G. E-mail: gerd.schueller@univie.ac.at; Neumann, K.; Helbich, T.; Riemer, H.; Backfrieder, W.; Sertl, K.; Herold, C.J

    2004-11-01

    Objective: High resolution computed tomography (HRCT) was used to assess the extent of bronchial reactivity after inhalative bronchoprovocation and dilation in hyperresponsive patients and healthy subjects. Patients and methods: Patients with mild intermittent asthma, 15 with a >20% decrease in FEV{sub 1} and a >10 mmHg (PC{sub 20}+) in PaO{sub 2}, 12 with a <20% decrease in FEV{sub 1} and a >10 mmHg (PC{sub 20}-) in PaO{sub 2} after provocation, and eight healthy humans were included in the study. Changes in cross-sectional area in a total of 1256 bronchi and in bronchial wall area (792 bronchi) were evaluated after histamine-triggered bronchoprovocation and salbutamol-induced bronchodilation at high lung volumes (FVC 80%). Data were compared with the results of pulmonary function tests (FEV{sub 1}, PaO{sub 2}, PaCO{sub 2}). Results: In all groups, a significant decrease in bronchial cross-sectional area (P<0.001) and a significant increase in bronchial wall area (P<0.001) were observed subsequent to bronchoprovocation. After bronchodilation, the increase in cross-sectional area (P<0.001) and the further increase in airway wall area (P<0.01) were significant in all groups. In PC{sub 20}+ and PC{sub 20}- asthmatics, significant differences (P<0.05) in PaO{sub 2}, >10 mmHg between baseline and provocation were observed. In healthy persons, the PaO{sub 2} decrease was <10 mmHg (P>0.05). After histamine provocation, the decrease in FEV{sub 1} was measured in the PC{sub 20}+ group, whereas a <20% FEV{sub 1} decrease was found in the PC{sub 20}- and the control groups, respectively. No significant correlations were observed between radiological data and the results of pulmonary function tests. Conclusions: HRCT demonstrated bronchial reactivity in hyperresponsive patients and, unexpectedly, in healthy subjects. The applied pulmonary function tests failed to characterize bronchial reactions in the healthy subjects. Based on these results, HRCT is a useful tool by which

  3. The High Altitude Balloon Experiment demonstration of acquisition, tracking, and pointing technologies (HABE-ATP)

    Science.gov (United States)

    Dimiduk, D.; Caylor, M.; Williamson, D.; Larson, L.

    1995-01-01

    The High Altitude Balloon Experiment demonstration of Acquisition, Tracking, and Pointing (HABE-ATP) is a system built around balloon-borne payload which is carried to a nominal 26-km altitude. The goal is laser tracking thrusting theater and strategic missiles, and then pointing a surrogate laser weapon beam, with performance levels end a timeline traceable to operational laser weapon system requirements. This goal leads to an experiment system design which combines hardware from many technology areas: an optical telescope and IR sensors; an advanced angular inertial reference; a flexible multi-level of actuation digital control system; digital tracking processors which incorporate real-time image analysis and a pulsed, diode-pumped solid state tracking laser. The system components have been selected to meet the overall experiment goals of tracking unmodified boosters at 50- 200 km range. The ATP system on HABE must stabilize and control a relative line of sight between the platform and the unmodified target booster to a 1 microrad accuracy. The angular pointing reference system supports both open loop and closed loop track modes; GPS provides absolute position reference. The control system which positions the line of sight for the ATP system must sequence through accepting a state vector handoff, closed-loop passive IR acquisition, passive IR intermediate fine track, active fine track, and then finally aimpoint determination and maintenance modes. Line of sight stabilization to fine accuracy levels is accomplished by actuating wide bandwidth fast steering mirrors (FSM's). These control loops off-load large-amplitude errors to the outer gimbal in order to remain within the limited angular throw of the FSM's. The SWIR acquisition and MWIR intermediate fine track sensors (both PtSi focal planes) image the signature of the rocket plume. After Hard Body Handover (HBHO), active fine tracking is conducted with a visible focal plane viewing the laser-illuminated target

  4. High temperature internal friction measurements of 3YTZP zirconia polycrystals. High temperature background and creep

    OpenAIRE

    Simas, P.; Castillo-Rodríguez, Miguel; Nó, M. L.; De-Bernardi, S.; Gómez-García, D.; Domínguez-Rodríguez, Alejandro; San Juan, J.

    2014-01-01

    This work focuses on the high-temperature mechanic properties of a 3 mol % yttria zirconia polycrystals (3YTZP), fabricated by hot-pressureless sintering. Systematic measurements of mechanical loss as a function of temperature and frequency were performed. An analytical method, based on the generalised Maxwell rheological model, has been used to analyse the high temperature internal friction background (HTB). This method has been previously applied to intermetallic compounds...

  5. NREL/SCE High-Penetration PV Integration Project: Report on Field Demonstration of Advanced Inverter Functionality in Fontana, CA

    Energy Technology Data Exchange (ETDEWEB)

    Mather, B.

    2014-08-01

    The National Renewable Energy Laboratory/Southern California Edison High-Penetration PV Integration Project is (1) researching the distribution system level impacts of high-penetration photovoltaic (PV) integration, (2) determining mitigation methods to reduce or eliminate those impacts, and (3) seeking to demonstrate these mitigation methods on actual high-penetration PV distribution circuits. This report describes a field demonstration completed during the fall of 2013 on the Fontana, California, study circuit, which includes a total of 4.5 MW of interconnected utility-scale rooftop PV systems. The demonstration included operating a 2-MW PV system at an off-unity power factor that had been determined during previously completed distribution system modeling and PV impact assessment analyses. Data on the distribution circuit and PV system operations were collected during the 2-week demonstration period. This demonstration reinforces the findings of previous laboratory testing that showed that utility-scale PV inverters are capable of operating at off-unity power factor to mitigate PV impacts; however, because of difficulties setting and retaining PV inverter power factor set points during the field demonstration, it was not possible to demonstrate the effectiveness of off-unity power factor operation to mitigate the voltage impacts of high-penetration PV integration. Lessons learned from this field demonstration are presented to inform future field demonstration efforts.

  6. Low Cost, High Returns: Getting More from International Partnerships

    Science.gov (United States)

    2014-01-01

    Thacker is Alumni and Outreach Manager for International Programs in the International Student Management Office ( ISMO ) at the National Defense...University. Paul W. Lambert is an Assistant Professor in ISMO . Chairman of the Joint Chiefs of Staff General Martin E. Dempsey addresses students

  7. Collaboration with Williams International to Demonstrate the Characteristics of a Foam-Metal-Liner Installed Over-the-Rotor of a Turbofan Engine

    Science.gov (United States)

    Sutliff, Daniel; Elliott, Dave; Jones, Mike; Hartley, Tom

    2008-01-01

    A Williams International FJ44-3A 3000-lb thrust class turbofan engine was used as a demonstrator for foam-metal liner installed in close proximity to the fan. Two foam metal liner designs were tested and compared to the hardwall. Traditional Single-Degree-of-Freedom liner designs were also evaluated to provide a comparison. Normalized information on farfield acoustics is presented in this paper. The results show that up to 5 dB PWL overall attenuation was achieved in the forward quadrant. In general, the foam-metal liners performed better when the fan tip speed was below sonic.

  8. Plasma Interaction with International Space Station High Voltage Solar Arrays

    Science.gov (United States)

    Heard, John W.

    2002-01-01

    The International Space Station (ISS) is presently being assembled in low-earth orbit (LEO) operating high voltage solar arrays (-160 V max, -140 V typical with respect to the ambient atmosphere). At the station's present altitude, there exists substantial ambient plasma that can interact with the solar arrays. The biasing of an object to an electric potential immersed in plasma creates a plasma "sheath" or non-equilibrium plasma around the object to mask out the electric fields. A positively biased object can collect electrons from the plasma sheath and the sheath will draw a current from the surrounding plasma. This parasitic current can enter the solar cells and effectively "short out" the potential across the cells, reducing the power that can be generated by the panels. Predictions of collected current based on previous high voltage experiments (SAMPIE (Solar Array Module Plasma Interactions Experiment), PASP+ (Photovoltaic Array Space Power) were on the order of amperes of current. However, present measurements of parasitic current are on the order of several milliamperes, and the current collection mainly occurs during an "eclipse exit" event, i.e., when the space station comes out of darkness. This collection also has a time scale, t approx. 1000 s, that is much slower than any known plasma interaction time scales. The reason for the discrepancy between predictions and present electron collection is not understood and is under investigation by the PCU (Plasma Contactor Unit) "Tiger" team. This paper will examine the potential structure within and around the solar arrays, and the possible causes and reasons for the electron collection of the array.

  9. Combined epiretinal and internal limiting membrane peeling facilitated by high dilution indocyanine green negative staining

    Directory of Open Access Journals (Sweden)

    Mark M Kaehr

    2015-01-01

    Full Text Available We describe the utilization of indocyanine green (ICG dye to facilitate combined/en bloc removal of epiretinal membranes (ERM along with internal limiting membranes (ILM. The method utilizes a highly diluted preparation of ICG in dextrose water solvent (D5W. Elimination of fluid air exchange step facilitating staining in the fluid phase and low intensity lighting help minimize potential ICG toxicity. The technique demonstrates how ICG facilitates negative staining of ERMs and how ILM peeling concomitantly can allow complete and efficient ERM removal minimizing surgical time and the necessity for dual or sequential staining.

  10. Demonstrated high performance of gas-filled rugby-shaped hohlraums on Omega

    Science.gov (United States)

    Philippe, F.; Tassin, V.; Depierreux, S.; Gauthier, P.; Masson-Laborde, P. E.; Monteil, M. C.; Seytor, P.; Villette, B.; Lasinski, B.; Park, H. S.; Ross, J. S.; Amendt, P.; Döppner, T.; Hinkel, D. E.; Wallace, R.; Williams, E.; Michel, P.; Frenje, J.; Gatu-Johnson, M.; Li, C. K.; Petrasso, R.; Glebov, V.; Sorce, C.; Stoeckl, C.; Nikroo, A.; Giraldez, E.

    2014-07-01

    A direct experimental comparison of rugby-shaped and cylindrical shaped gas-filled hohlraums on the Omega laser facility demonstrates that higher coupling and minimal backscatter can be achieved in the rugby geometry, leading to significantly enhanced implosion performance. A nearly 50% increase of x-ray drive is associated with earlier bangtime and increase of neutron production. The observed drive enhancement from rugby geometry in this study is almost twice stronger than in previously published results.

  11. Demonstrated high performance of gas-filled rugby-shaped hohlraums on Omega

    Energy Technology Data Exchange (ETDEWEB)

    Philippe, F.; Villette, B. [CEA, DAM, DIF, F-91297 Arpajon (France); Michel, P. [Lawrence Livermore National Laboratory, Livermore, California 94550 (United States); Petrasso, R. [Plasma Science and Fusion Center, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139 (United States); Stoeckl, C. [Laboratory for Laser Energetics, University of Rochester, Rochester, New York 14623 (United States); Giraldez, E. [General Atomics, P.O. Box 85608, San Diego, California 92186-5608 (United States); Tassin, V.; Depierreux, S.; Gauthier, P.; Masson-Laborde, P. E.; Monteil, M. C.; Seytor, P.; Lasinski, B.; Park, H. S.; Ross, J. S.; Amendt, P.; Döppner, T.; Hinkel, D. E.; Wallace, R.; Williams, E.; and others

    2014-07-15

    A direct experimental comparison of rugby-shaped and cylindrical shaped gas-filled hohlraums on the Omega laser facility demonstrates that higher coupling and minimal backscatter can be achieved in the rugby geometry, leading to significantly enhanced implosion performance. A nearly 50% increase of x-ray drive is associated with earlier bangtime and increase of neutron production. The observed drive enhancement from rugby geometry in this study is almost twice stronger than in previously published results.

  12. Demonstrated high performance of gas-filled rugby-shaped hohlraums on Omega

    Energy Technology Data Exchange (ETDEWEB)

    Philippe, F. [Commissariat a l' Energie Atomique et aux Energies Alternatives (CEA), Arpajon (France); Tassin, V. [Commissariat a l' Energie Atomique et aux Energies Alternatives (CEA), Arpajon (France); Depierreux, S. [Commissariat a l' Energie Atomique et aux Energies Alternatives (CEA), Arpajon (France); Gauthier, P. [Commissariat a l' Energie Atomique et aux Energies Alternatives (CEA), Arpajon (France); Masson-Laborde, P. E. [Commissariat a l' Energie Atomique et aux Energies Alternatives (CEA), Arpajon (France); Monteil, M. C. [Commissariat a l' Energie Atomique et aux Energies Alternatives (CEA), Arpajon (France); Seytor, P. [Commissariat a l' Energie Atomique et aux Energies Alternatives (CEA), Arpajon (France); Villette, B. [Commissariat a l' Energie Atomique et aux Energies Alternatives (CEA), Arpajon (France); Lasinski, B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Park, H. S. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Ross, J. S. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Amendt, P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Doeppner, T. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Hinkel, D. E. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Wallace, R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Williams, E. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Michel, P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Frenje, J. [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States). Plasma Science and Fusion Center; Gatu-Johnson, M. [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States). Plasma Science and Fusion Center; Li, C. K. [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States). Plasma Science and Fusion Center; Petrasso, R. [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States). Plasma Science and Fusion Center; Glebov, V. [Univ. of Rochester, NY (United States). Lab. for Laser Energetics; Sorce, C. [Univ. of Rochester, NY (United States). Lab. for Laser Energetics; Stoeckl, C. [Univ. of Rochester, NY (United States). Lab. for Laser Energetics; Nikroo, A. [General Atomics, San Diego, CA (United States); Giraldez, E. [General Atomics, San Diego, CA (United States)

    2014-07-25

    A direct experimental comparison of rugby-shaped and cylindrical shaped gas-filled hohlraums on the Omega laser facility demonstrates that higher coupling and minimal backscatter can be achieved in the rugby geometry, leading to significantly enhanced implosion performance. A nearly 50% increase of x-ray drive is associated with earlier bangtime and increase of neutron production. The observed drive enhancement from rugby geometry in this study is almost twice stronger than in previously published results.

  13. The Waste Isolation Pilot Plant - An International Center of Excellence for ''Training in and Demonstration of Waste Disposal Technologies''

    Energy Technology Data Exchange (ETDEWEB)

    Matthews, Mark L.; Eriksson, Leif G.

    2003-02-25

    The Waste Isolation Pilot Plant (WIPP) site, which is managed and operated by the United States (U.S.) Department of Energy (USDOE) Carlsbad Field Office (CBFO) and located in the State of New Mexico, presently hosts an underground research laboratory (URL) and the world's first certified and operating deep geological repository for safe disposition of long-lived radioactive materials (LLRMs). Both the URL and the repository are situated approximately 650 meters (m) below the ground surface in a 250-million-year-old, 600-m-thick, undisturbed, bedded salt formation, and they have been in operation since 1982 and 1999, respectively. Founded on long-standing CBFO collaborations with international and national radioactive waste management organizations, since 2001, WIPP serves as the Center of Excellence in Rock Salt for the International Atomic Energy Agency's (IAEA's) International Network of Centers on ''Training in and Demonstration of Waste Disposal Technologies in Underground Research Facilities'' (the IAEA Network). The primary objective for the IAEA Network is to foster collaborative projects among IAEA Member States that: supplement national efforts and promote public confidence in waste disposal schemes; contribute to the resolution of key technical issues; and encourage the transfer and preservation of knowledge and technologies.

  14. The NIF: An international high energy density science and inertial fusion user facility

    Directory of Open Access Journals (Sweden)

    Moses E.I.

    2013-11-01

    Full Text Available The National Ignition Facility (NIF, a 1.8-MJ/500-TW Nd:Glass laser facility designed to study inertial confinement fusion (ICF and high-energy-density science (HEDS, is operational at Lawrence Livermore National Laboratory (LLNL. A primary goal of NIF is to create the conditions necessary to demonstrate laboratory-scale thermonuclear ignition and burn. NIF experiments in support of indirect-drive ignition began late in FY2009 as part of the National Ignition Campaign (NIC, an international effort to achieve fusion ignition in the laboratory. To date, all of the capabilities to conduct implosion experiments are in place with the goal of demonstrating ignition and developing a predictable fusion experimental platform in 2012. The results from experiments completed are encouraging for the near-term achievement of ignition. Capsule implosion experiments at energies up to 1.6 MJ have demonstrated laser energetics, radiation temperatures, and symmetry control that scale to ignition conditions. Of particular importance is the demonstration of peak hohlraum temperatures near 300 eV with overall backscatter less than 15%. Important national security and basic science experiments have also been conducted on NIF. Successful demonstration of ignition and net energy gain on NIF will be a major step towards demonstrating the feasibility of laser-driven Inertial Fusion Energy (IFE. This paper will describe the results achieved so far on the path toward ignition, the beginning of fundamental science experiments and the plans to transition NIF to an international user facility providing access to HEDS and fusion energy researchers around the world.

  15. Operational demonstration of a field of high performance flat plate collectors with isothermal heat transport

    Science.gov (United States)

    Merges, V.; Klippel, E.

    1983-12-01

    A solar plant with 21 sq m of highly efficient flat plate collectors and which requires no electricity is described. Heat transport is provided by saturated steam that condenses in a four cubic meter storage tank. The operation temperature is set by the buffer gas pressure between 100 and 140 C, and an absorption chiller is simulated as a heat consumer. The solar collectors were observed to exhibit high performance. Heat transport and temperature control offered high reliability and the thermal stratification in the tank was satisfactory. The positive result permits the design and construction of larger solar plants following the same technical principles.

  16. PREFACE: XIV International Conference on Calorimetry in High Energy Physics

    Science.gov (United States)

    Wang, Yifang

    2011-03-01

    The International Conferences on Calorimetry in High Energy Physics (also known as the Calor Conference series, started in October 1990 at Fermilab) address all aspects of calorimetric particle detection and measurement, with an emphasis on high energy physics experiments. The XIV International Conference on Calorimetry in High Energy Physics (Calor 2010) was held at the campus of the Institute of High Energy Physics, Beijing, China, from May 10-14, 2010. This conference brought together more than 110 participants from 20 countries, including senior scientists and young physicists. During the five days of the conference, 98 presentations were given in seven plenary sessions. The attendees had in-depth discussions on the latest developments and innovations in calorimetry, including the exciting new LHC results. From the presentations, 83 papers were published in this proceedings. The success of the conference was due to the participants' enthusiasm and the excellent talks given by the speakers, and to the conveners for organizing the individual sessions. We would like to thank the International Advisory Committee for giving us the opportunity to host this Conference in Beijing. Finally we would like to thank all the people involved in the organization of the Conference, who have provided valuable local support. Yifang WangChair of Local Organizing Committee International Advisory Committee M DanilovITEP Moscow M DiemozINFN Roma I A EreditatoBern F L FabbriINFN Frascati T KobayashiICEPP Tokyo M LivanPavia University & INFN P LubranoINFN Perugia S MagillANL Argonne A MaioLIPP Lisbon H OberlackMPI Munich A ParaFermilab R WigmansTTU Lubbock R YoshidaANL Argonne R ZhuCaltech Local Organizing Committee Y WangIHEP (Chair) Y GaoTshinghua University T HuIHEP (Scientific secretary) C LiUSTC W LiIHEP J LuIHEP P WangIHEP T XuIHEP L ZhouIHEP Session Conveners 1) Materials and detectors - Junguang Lu (IHEP), Francesca Nessi (CERN) 2) Algorithm and simulation - Nural Akchurin

  17. Demonstrating the potential of yttrium-doped barium zirconate electrolyte for high-performance fuel cells

    Science.gov (United States)

    Bae, Kiho; Jang, Dong Young; Choi, Hyung Jong; Kim, Donghwan; Hong, Jongsup; Kim, Byung-Kook; Lee, Jong-Ho; Son, Ji-Won; Shim, Joon Hyung

    2017-02-01

    In reducing the high operating temperatures (>=800 °C) of solid-oxide fuel cells, use of protonic ceramics as an alternative electrolyte material is attractive due to their high conductivity and low activation energy in a low-temperature regime (fuel cells. However, poor sinterability of yttrium-doped barium zirconate discourages its fabrication as a thin-film electrolyte and integration on porous anode supports, both of which are essential to achieve high performance. Here we fabricate a protonic-ceramic fuel cell using a thin-film-deposited yttrium-doped barium zirconate electrolyte with no impeding grain boundaries owing to the columnar structure tightly integrated with nanogranular cathode and nanoporous anode supports, which to the best of our knowledge exhibits a record high-power output of up to an order of magnitude higher than those of other reported barium zirconate-based fuel cells.

  18. Demonstration of coherent emission from high-$\\beta$ photonic crystal nanolasers at room temperature

    CERN Document Server

    Hostein, Richard; Gratiet, Luc Le; Talneau, Anne; Beaudoin, Gregoire; Robert-Philip, Isabelle; Sagnes, Isabelle; Beveratos, Alexios

    2010-01-01

    We report on lasing at room temperature and at telecommunications wavelength from photonic crystal nanocavities based on InAsP/InP quantum dots. Such laser cavities with a small modal volume and high quality factor display a high spontaneous emission coupling factor beta. Lasing is confirmed by measuring the second order autocorrelation function. A smooth transition from chaotic to coherent emission is observed, and coherent emission is obtained at 8 times the threshold power.

  19. Demonstration of coherent emission from high-beta photonic crystal nanolasers at room temperature.

    Science.gov (United States)

    Hostein, R; Braive, R; Le Gratiet, L; Talneau, A; Beaudoin, G; Robert-Philip, I; Sagnes, I; Beveratos, A

    2010-04-15

    We report on lasing at room temperature and at telecommunications wavelength from photonic crystal nanocavities based on InAsP/InP quantum dots. Such laser cavities with a small modal volume and high quality factor display a high spontaneous emission coupling factor (beta). Lasing is confirmed by measuring the second-order autocorrelation function. A smooth transition from chaotic to coherent emission is observed, and coherent emission is obtained at eight times the threshold power.

  20. Demonstration of short-range wind lidar in a high-performance wind tunnel

    DEFF Research Database (Denmark)

    Pedersen, Anders Tegtmeier; Montes, Belen Fernández; Pedersen, Jens Engholm;

    A short-range continuous-wave coherent laser radar (lidar) has been tested in a high-performance wind tunnel for possible use as a standard component in wind tunnels. The lidar was tested in a low as well as a high speed regime ranging from 5-35 m/s and 40-75 m/s, respectively. In both low and hi...... future for short range lidars as a complement to LDA and other standard equipment in wind tunnels....

  1. Demonstration of short-range wind lidar in a high-performance wind tunnel

    DEFF Research Database (Denmark)

    Pedersen, Anders Tegtmeier; Montes, Belen Fernández; Pedersen, Jens Engholm;

    2012-01-01

    A short-range continuous-wave coherent laser radar (lidar) has been tested in a high-performance wind tunnel for possible use as a standard component in wind tunnels. The lidar was tested in a low as well as a high speed regime ranging from 5-35 m/s and 40-75 m/s, respectively. In both low and hi...... future for short range lidars as a complement to LDA and other standard equipment in wind tunnels....

  2. System integration and demonstration of adhesive bonded high temperature aluminum alloys for aerospace structure, phase 2

    Science.gov (United States)

    Falcone, Anthony; Laakso, John H.

    1993-01-01

    Adhesive bonding materials and processes were evaluated for assembly of future high-temperature aluminum alloy structural components such as may be used in high-speed civil transport aircraft and space launch vehicles. A number of candidate high-temperature adhesives were selected and screening tests were conducted using single lap shear specimens. The selected adhesives were then used to bond sandwich (titanium core) test specimens, adhesive toughness test specimens, and isothermally aged lap shear specimens. Moderate-to-high lap shear strengths were obtained from bonded high-temperature aluminum and silicon carbide particulate-reinforced (SiC(sub p)) aluminum specimens. Shear strengths typically exceeded 3500 to 4000 lb/in(sup 2) and flatwise tensile strengths exceeded 750 lb/in(sup 2) even at elevated temperatures (300 F) using a bismaleimide adhesive. All faceskin-to-core bonds displayed excellent tear strength. The existing production phosphoric acid anodize surface preparation process developed at Boeing was used, and gave good performance with all of the aluminum and silicon carbide particulate-reinforced aluminum alloys investigated. The results of this program support using bonded assemblies of high-temperature aluminum components in applications where bonding is often used (e.g., secondary structures and tear stoppers).

  3. Demonstration and Validation of a High-Performance Floor-Sealant System to Reduce Concrete Degradation

    Science.gov (United States)

    2015-05-01

    System to Reduce Concrete Degradation Final Report on Project F10-AR02 Co ns tr uc tio n En gi ne er in g R es ea rc h La bo ra to ry Clint...of a High-Performance Floor-Sealant System to Reduce Concrete Degradation Final Report on Project F10-AR02 Clint A. Wilson and Susan A. Drozdz...Under Project F10-AR02, “Application of an Innovative, High Performance Concrete Floor Sealant at Hunter Army Airfield, Georgia” ERDC/CERL TR-15-9 ii

  4. Experimental demonstration of a compact epithermal neutron source based on a high power laser

    Science.gov (United States)

    Mirfayzi, S. R.; Alejo, A.; Ahmed, H.; Raspino, D.; Ansell, S.; Wilson, L. A.; Armstrong, C.; Butler, N. M. H.; Clarke, R. J.; Higginson, A.; Kelleher, J.; Murphy, C. D.; Notley, M.; Rusby, D. R.; Schooneveld, E.; Borghesi, M.; McKenna, P.; Rhodes, N. J.; Neely, D.; Brenner, C. M.; Kar, S.

    2017-07-01

    Epithermal neutrons from pulsed-spallation sources have revolutionised neutron science allowing scientists to acquire new insight into the structure and properties of matter. Here, we demonstrate that laser driven fast (˜MeV) neutrons can be efficiently moderated to epithermal energies with intrinsically short burst durations. In a proof-of-principle experiment using a 100 TW laser, a significant epithermal neutron flux of the order of 105 n/sr/pulse in the energy range of 0.5-300 eV was measured, produced by a compact moderator deployed downstream of the laser-driven fast neutron source. The moderator used in the campaign was specifically designed, by the help of MCNPX simulations, for an efficient and directional moderation of the fast neutron spectrum produced by a laser driven source.

  5. An investigation of the influence of reconceptualization of demonstrative experimental activities of optics in high school

    Directory of Open Access Journals (Sweden)

    Jair Lúcio Prados Ribeiro

    2013-08-01

    Full Text Available In this work, we analyze the influence that the use of demonstrative experiments can bring to the learning of optics. It is assumed that the development of experimental activities, when reconceptualized according to Hodson proposal, tends to contribute to the generation of cognitive conflicts when compared to traditional didactic experience. Justifications are given for an analysis of changes under a Piagetian bias, reconciled with Hodson proposal. The methodology used to structure the topics presentations was quasi-experimental, contrasting an experimental group with a control group. The measuring of the effectiveness of the suggested working method was made from a quantitative analysis, which identified some of the topics discussed had better results in learning, being more tied to the experiments carried out.

  6. NASA Environmentally Responsible Aviation's Highly-Loaded Front Block Compressor Demonstration

    Science.gov (United States)

    Celestina, Mark

    2017-01-01

    The ERA project was created in 2009 as part of NASAs Aeronautics Research Mission Directorates (ARMD) Integrated Systems Aviation Program (IASP). The purpose of the ERA project was to explore and document the feasibility, benefit, and technical risk of vehicles concepts and enabling technologies to reduce aviations impact on the environment. The metrics for this technology is given in Figure 1 with the N+2 metrics highlighted in green. It is anticipated that the United States air transportation system will continue to expand significantly over the next few decades thus adversely impacting the environment unless new technology is incorporated to simultaneously reduce nitrous oxides (NOx), noise and fuel consumption. In order to achieve the overall goals and meet the technology insertion challenges, these goals were divided into technical challenges that were to be achieved during the execution of the ERA project. Technical challenges were accomplished through test campaigns conducted by Integrated Technology Demonstration (ITDs). ERAs technical performance period ended in 2015.

  7. High Degree of Plasmodium vivax Diversity in the Peruvian Amazon Demonstrated by Tandem Repeat Polymorphism Analysis

    Science.gov (United States)

    Kosek, Margaret; Yori, Pablo P.; Gilman, Robert H.; Calderon, Maritza; Zimic, Mirko; Chuquiyauri, Raul; Jeri, Cesar; Pinedo-Cancino, Viviana; Matthias, Michael A.; Llanos-Cuentas, Alejandro; Vinetz, Joseph M.

    2012-01-01

    Molecular tools to distinguish strains of Plasmodium vivax are important for studying the epidemiology of malaria transmission. Two sets of markers—tandem repeat (TR) polymorphisms and MSP3α—were used to study Plasmodium vivax in patients in the Peruvian Amazon region of Iquitos. Of 110 patients, 90 distinct haplotypes were distinguished using 9 TR markers. An MSP3α polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) using HhaI and AluI revealed 8 and 9 profiles, respectively, and 36 profiles when analyzed in combination. Combining TR and PCR-RFLP markers, 101 distinct molecular profiles were distinguished among these 110 patients. Nine TR markers arrayed along a 100 kB stretch of a P. vivax chromosome containing the gene for circumsporozoite protein showed non-linear linkage disequilibrium (ISA = 0.03, P = 0.001). These findings demonstrate the potential use of TR markers for molecular epidemiology studies. PMID:22492139

  8. Thermal Properties of Simulated and High-Level Waste Solutions Used for the Solvent Extraction Demonstration

    Energy Technology Data Exchange (ETDEWEB)

    Fondeur, F.F.

    2001-06-27

    Researchers measured the heat capacity and thermal conductivity of supernate from a blend of Tank 37H and 44F, of a simulant of this blend, and of a simulant specifically designed for solvent extraction experiments. The measured heat capacity of the blend from the Tanks 37H and 44F equaled 0.871 cal/(g degrees C). The simulant of this blend produced an identical result. The heat capacity of the simulant designed for solvent extraction testing equaled 0.859 cal/(g degrees C). All three solutions have thermal conductivities in the range of 0.54 to 0.6 Watts/(m degrees C). The slight variation in the thermophysical properties of these solutions successfully explains the different flowmeter readings observed during the real waste demonstration of the solvent extraction technology.

  9. Demonstration of highly efficient forward stimulated Brillouin scattering in partly suspended silicon nanowire racetrack resonators

    Science.gov (United States)

    Zhang, Ruiwen; Sun, Junqiang; Chen, Guodong; Cheng, Ming; Jiang, Jialin

    2017-07-01

    We demonstrate the forward stimulated Brillouin scattering (FSBS) in a partly suspended silicon nanowire racetrack resonator. To realize the tight confinement of the transverse acoustic modes in the nanoscale silicon core, the racetrack resonator is supported by the tiny pillar. The Brillouin amplification of 2.25 dB is achieved with the resonator radius of 100 μm under a low-power pump laser of 8 mW. The influences of the waveguide width and the top width of the tiny pillar on the Brillouin frequency shift and Brillouin gain are presented and analyzed. The Brillouin frequency shift is conveniently manipulated by the changes in waveguide widths. Our proposed approach furnishes an alternative towards harnessing FSBS in integrated photonic circuits.

  10. Demonstrating the potential of yttrium-doped barium zirconate electrolyte for high-performance fuel cells.

    Science.gov (United States)

    Bae, Kiho; Jang, Dong Young; Choi, Hyung Jong; Kim, Donghwan; Hong, Jongsup; Kim, Byung-Kook; Lee, Jong-Ho; Son, Ji-Won; Shim, Joon Hyung

    2017-02-23

    In reducing the high operating temperatures (≥800 °C) of solid-oxide fuel cells, use of protonic ceramics as an alternative electrolyte material is attractive due to their high conductivity and low activation energy in a low-temperature regime (≤600 °C). Among many protonic ceramics, yttrium-doped barium zirconate has attracted attention due to its excellent chemical stability, which is the main issue in protonic-ceramic fuel cells. However, poor sinterability of yttrium-doped barium zirconate discourages its fabrication as a thin-film electrolyte and integration on porous anode supports, both of which are essential to achieve high performance. Here we fabricate a protonic-ceramic fuel cell using a thin-film-deposited yttrium-doped barium zirconate electrolyte with no impeding grain boundaries owing to the columnar structure tightly integrated with nanogranular cathode and nanoporous anode supports, which to the best of our knowledge exhibits a record high-power output of up to an order of magnitude higher than those of other reported barium zirconate-based fuel cells.

  11. A Model Vocational High Technology in Health Care Demonstration Project. Final Performance Report.

    Science.gov (United States)

    Valencia Community Coll., Orlando, FL.

    A unique training program in high tech obstetrical, neonatal, and pediatric nursing care areas was designed to be offered on site at Orlando (Florida) Regional Medical/Arnold Palmer Hospital for Children and Women. The training program offered 16 different courses to 355 employees over the 18-month period of the project. A needs assessment was…

  12. Characteristics of highly talented international business professionals defined : Qualitative study among international business professionals

    NARCIS (Netherlands)

    Heugten, Petra van; Heijne-Penninga, Marjolein; Paans, Wolter; Wolfensberger, Marca

    2016-01-01

    Purpose – The purpose of this paper is to explore the characteristics of talent in relation to international business to facilitate selection and development of talent in human resources (HR) and human resource development (HRD). Design/methodology/approach – A mixed method design was used: focus g

  13. Characteristics of Highly Talented International Business Professionals Defined: Qualitative Study among International Business Professionals

    Science.gov (United States)

    van Heugten, Petra; Heijne-Penninga, Marjolein; Paans, Wolter; Wolfensberger, Marca

    2016-01-01

    Purpose: The purpose of this paper is to explore the characteristics of talent in relation to international business to facilitate selection and development of talent in human resources (HR) and human resource development (HRD). Design/methodology/approach: A mixed method design was used: focus groups with business professionals to identify the…

  14. GEOSAF Part II. Demonstration of the operational and long-term safety of geological disposal facilities for radioactive waste. IAEA international intercomparison and harmonization project

    Energy Technology Data Exchange (ETDEWEB)

    Kumano, Yumiko; Bruno, Gerard [International Atomic Energy Agency, Vienna (Austria). Vienna International Centre; Tichauer, Michael [IRSN, Institut de Radioprotection et de Surete Nucleaire, Fontenay-aux-Roses (France); Hedberg, Bengt [Swedish Radiation Safety Authority, Stockholm (Sweden)

    2015-07-01

    International intercomparison and harmonization projects are one of the mechanisms developed by the IAEA for examining the application and use of safety standards, with a view to ensuring their effectiveness and working towards harmonization of approaches to the safety of radioactive waste management. The IAEA has organized a number of international projects on the safety of radioactive waste management; in particular on the issues related to safety demonstration for radioactive waste management facilities. In 2008, GEOSAF, Demonstration of The Operational and Long-Term Safety of Geological Disposal Facilities for Radioactive Waste, project was initiated. This project was completed in 2011 by delivering a project report focusing on the safety case for geological disposal facilities, a concept that has gained in recent years considerable prominence in the waste management area and is addressed in several international safety standards. During the course of the project, it was recognized that little work was undertaken internationally to develop a common view on the safety approach related to the operational phase of a geological disposal although long-term safety of disposal facility has been discussed for several decades. Upon completion of the first part of the GEOSAF project, it was decided to commence a follow-up project aiming at harmonizing approaches on the safety of geological disposal facilities for radioactive waste through the development of an integrated safety case covering both operational and long-term safety. The new project was named as GEOSAF Part II, which was initiated in 2012 initially as 2-year project, involving regulators and operators. GEOSAF Part II provides a forum to exchange ideas and experience on the development and review of an integrated operational and post-closure safety case for geological disposal facilities. It also aims at providing a platform for knowledge transfer. The project is of particular interest to regulatory

  15. DEMONSTRATION OF 3D EFFECTS WITH HIGH GAIN AND EFFICIENCY IN A UV FEL OSCILLATOR

    Energy Technology Data Exchange (ETDEWEB)

    Stephen Benson; George Biallas; Keith Blackburn; James Boyce; Donald Bullard; James Coleman; Cody Dickover; David Douglas; Forrest Ellingsworth; Pavel Evtushenko; Carlos Hernandez-Garcia; Christopher Gould; Joseph Gubeli; David Hardy; Kevin Jordan; John Klopf; James Kortze; Robert Legg; Matthew Marchlik; Steven Moore; George Neil; Thomas Powers; Daniel Sexton; Michelle D. Shinn; Christopher Tennant; Richard Walker; Anne Watson; Gwyn Williams; Frederick Wilson; Shukui Zhang

    2011-03-01

    We report on the performance of a high gain UV FEL oscillator operating on an energy recovery linac at Jefferson Lab. The high brightness of the electron beam leads to both gain and efficiency that cannot be reconciled with a one-dimensional model. Three-dimensional simulations do predict the performance with reasonable precision. Gain in excess of 100% per pass and an efficiency close to 1/2NW, where NW is the number of wiggler periods, is seen. The laser mirror tuning curves currently permit operation in the wavelength range of 438 to 362 nm. Another mirror set allows operation at longer wavelengths in the red with even higher gain and efficiency.

  16. Demonstration and Validation of Stainless Steel Materials for Critical Above Grade Piping in Highly Corrosive Locations

    Science.gov (United States)

    2017-05-01

    Prepared for Office of the Secretary of Defense (OUSD(AT&L)) Washington, DC 20301-3090 Under Project F07-AR15, “ Advanced Corrosion-Resistant Steel for...world for steel infrastruc- ture . Highly corroded carbon steel pipes at the site were replaced with two grades of stainless steel, and minor corrosion...mitigation modifications were made to pipe supports. After the rehabilitated system was commis- sioned, the pipes were inspected and tested according

  17. Manufacturing Systems Demonstration: Bimetallic Friction STIR Joining of AA6061 and High Hardness Steel

    Science.gov (United States)

    2013-05-31

    tool’s first use. In all tools made of alloy having hafnium carbide, we’ve commonly seen small voids (0.0-1.0 mm dia.) on the surface of machined...distribution unlimited 13. SUPPLEMENTARY NOTES 14. ABSTRACT Focus: HOPE (FH) has developed the process parameters to successfully join AA6061 aluminum alloy ...to successfully join AA6061 aluminum alloy and High Hardness Armor (HHA) steel using the friction stir process (FSP). Metallographic analysis

  18. Demonstrating Nonhexavelent Chrome Steel Conversion Coatings on Stryker High Hard Armor Steel Hatches

    Science.gov (United States)

    2014-01-01

    embrittlement are as follows: 1. Any ferrous -based alloy exhibiting hardness greater than Rc35 (e.g., high-strength steel) requires testing and heat...section is based on the findings from WP-1521. Most of the conversion coating work thus far has focused on the use of TCP on aluminum alloys . In...recent years, TCP has enjoyed good success on aluminum. However, for steel alloys and phosphated surfaces, further development is needed. One of the

  19. Demonstration of Space Optical Transmitter Development for Multiple High Frequency Bands

    Science.gov (United States)

    Nguyen, Hung; Simons, Rainee; Wintucky, Edwin; Freeman, Jon

    2013-01-01

    As the demand for multiple radio frequency carrier bands continues to grow in space communication systems, the design of a cost-effective compact optical transmitter that is capable of transmitting selective multiple RF bands is of great interest, particularly for NASA Space Communications Network Programs. This paper presents experimental results that demonstrate the feasibility of a concept based on an optical wavelength division multiplexing (WDM) technique that enables multiple microwave bands with different modulation formats and bandwidths to be combined and transmitted all in one unit, resulting in many benefits to space communication systems including reduced size, weight and complexity with corresponding savings in cost. Experimental results will be presented including the individual received RF signal power spectra for the L, C, X, Ku, Ka, and Q frequency bands, and measurements of the phase noise associated with each RF frequency. Also to be presented is a swept RF frequency power spectrum showing simultaneous multiple RF frequency bands transmission. The RF frequency bands in this experiment are among those most commonly used in NASA space environment communications.

  20. Demonstration of space optical transmitter development for multiple high-frequency bands

    Science.gov (United States)

    Nguyen, Hung; Simons, Rainee; Wintucky, Edwin; Freeman, Jon

    2013-05-01

    As the demand for multiple radio frequency carrier bands continues to grow in space communication systems, the design of a cost-effective compact optical transmitter that is capable of transmitting selective multiple RF bands is of great interest, particularly for NASA Space Communications Network Programs. This paper presents experimental results that demonstrate the feasibility of a concept based on an optical wavelength division multiplexing (WDM) technique that enables multiple microwave bands with different modulation formats and bandwidths to be combined and transmitted all in one unit, resulting in many benefits to space communication systems including reduced size, weight and complexity with corresponding savings in cost. Experimental results will be presented including the individual received RF signal power spectra for the L, C, X, Ku, Ka, and Q frequency bands, and measurements of the phase noise associated with each RF frequency. Also to be presented is a swept RF frequency power spectrum showing simultaneous multiple RF frequency bands transmission. The RF frequency bands in this experiment are among those most commonly used in NASA space environment communications.

  1. FLUIDIZED BED STEAM REFORMING (FBSR) OF HIGH LEVEL WASTE (HLW) ORGANIC AND NITRATE DESTRUCTION PRIOR TO VITRIFICATION: CRUCIBLE SCALE TO ENGINEERING SCALE DEMONSTRATIONS AND NON-RADIOACTIVE TO RADIOACTIVE DEMONSTRATIONS

    Energy Technology Data Exchange (ETDEWEB)

    Jantzen, C; Michael Williams, M; Gene Daniel, G; Paul Burket, P; Charles Crawford, C

    2009-02-07

    Over a decade ago, an in-tank precipitation process to remove Cs-137 from radioactive high level waste (HLW) supernates was demonstrated at the Savannah River Site (SRS). The full scale demonstration with actual HLW was performed in SRS Tank 48 (T48). Sodium tetraphenylborate (NaTPB) was added to enable Cs-137 extraction as CsTPB. The CsTPB, an organic, and its decomposition products proved to be problematic for subsequent processing of the Cs-137 precipitate in the SRS HLW vitrification facility for ultimate disposal in a HLW repository. Fluidized Bed Steam Reforming (FBSR) is being considered as a technology for destroying the organics and nitrates in the T48 waste to render it compatible with subsequent HLW vitrification. During FBSR processing the T48 waste is converted into organic-free and nitrate-free carbonate-based minerals which are water soluble. The soluble nature of the carbonate-based minerals allows them to be dissolved and pumped to the vitrification facility or returned to the tank farm for future vitrification. The initial use of the FBSR process for T48 waste was demonstrated with simulated waste in 2003 at the Savannah River National Laboratory (SRNL) using a specially designed sealed crucible test that reproduces the FBSR pyrolysis reactions, i.e. carbonate formation, organic and nitrate destruction. This was followed by pilot scale testing of simulants at the Science Applications International Corporation (SAIC) Science & Technology Application Research (STAR) Center in Idaho Falls, ID by Idaho National Laboratory (INL) and SRNL in 2003-4 and then engineering scale demonstrations by THOR{reg_sign} Treatment Technologies (TTT) and SRS/SRNL at the Hazen Research, Inc. (HRI) test facility in Golden, CO in 2006 and 2008. Radioactive sealed crucible testing with real T48 waste was performed at SRNL in 2008, and radioactive Benchscale Steam Reformer (BSR) testing was performed in the SRNL Shielded Cell Facility (SCF) in 2008.

  2. Demonstration of a high sensitivity GNSS software receiver for indoor positioning

    Science.gov (United States)

    Lin, Tao; Ma, Martin; Broumandan, Ali; Lachapelle, Gérard

    2013-03-01

    Advances in signal processing techniques contributed to the significant improvements of GNSS receiver performance in dense multipath environments and created the opportunities for a new category of high-sensitivity GNSS (HS-GNSS) receivers that can provide GNSS location services in indoor environments. The difficulties in improving the availability, reliability, and accuracy of these indoor capable GNSS receivers exceed those of the receivers designed for the most hostile urban canyon environments. The authors of this paper identified the vector tracking schemes, signal propagation statistics, and parallel processing techniques that are critical to a robust HS-GNSS receiver for indoor environments and successfully incorporated them into a fully functional high-sensitivity software receiver. A flexible vector-based receiver architecture is introduced to combine these key indoor signal processing technologies into GSNRx-hs™ - the high sensitivity software navigation receiver developed at the University of Calgary. The resulting receiver can perform multi-mode vector tracking in indoor environment at various levels of location and timing uncertainties. In addition to the obvious improvements in time-to-first-fix (TTFF) and signal sensitivity, the field test results in indoor environments surrounded by wood, glass, and concrete showed that the new techniques effectively improved the performance of indoor GNSS positioning. With fine GNSS timing, the proposed receiver can consistently deliver indoor navigation solution with the horizontal accuracy of 2-15 m depending on the satellite geometry and the indoor environments. If only the coarse GNSS timing is available, the horizontal accuracy of the indoor navigation solution from the proposed receiver is around 30 m depending on the coarse timing accuracy, the satellite geometry, and the indoor environments. From the preliminary field test results, it has been observed that the signal processing sensitivity is the

  3. Design and Demonstration of RSFQ Processor Datapath for High Performance Computing

    Science.gov (United States)

    2014-09-30

    ot·P n n t t·Pc::h·; f’tPrl ;n v,;o lnP <:n t hPv "’"’" h P tnnvPrl t n "’" " nl !’lf’P n n "’ Lb--~ Jb--~ DFFC microphotograph Fig. 2.1. 3...including digital-RF receivers, instrumentation , high performance computing, network switches, sensor systems, etc. [1]-[5]. There were multiple

  4. Inter-island optical link demonstration using high-data-rate pulse-position modulation

    Science.gov (United States)

    Bacher, Michael; Arnold, Felix; Thieme, Björn

    2014-03-01

    The growing data-rate demand on satellite communication systems has led to the increased interest in optical space communication solutions for uplinks and downlinks between satellites and ground stations. As one example for applications that benefit from higher data-rates offered by optical links, RUAG Space studied an uplink scenario from an Unmanned Aerial Vehicle (UAV) to a Geostationary Orbit (GEO), under the European Space Agency project formally known as "Optical Communications Transceiver for Atmospheric Links" (OCTAL). Particularly suitable for optical links through turbulent atmospheres are robust Pulse Position Modulation (PPM) schemes. Communication electronics using a Multi-Pulse PPM (MPPM) scheme have been developed, increasing the data-rate compared to traditional PPM at a constant peak-to-average ratio while allowing a widely configurable data-rate range. The communication system was tested together with a newly developed receiver and transmitter at a wavelength of 1055nm in a field test campaign on the Canary Islands, where the transmitter telescope was located on La Palma while the receiver was installed within the ESA Optical Ground Station on Tenerife. The nearly horizontal link between the two islands with a link distance of 142km allowed validation of relevant system performances under stringent atmospheric conditions. A data-rate of more than 360Mbps could be demonstrated using MPPM, while nearly 220Mbps could be achieved with traditional PPM, well exceeding the targeted data-rate of the studied UAV-to-GEO scenario. Following an introduction on the applied MPPM schemes, the architecture of the test setup is described, different modulation schemes are compared and the test results of this Inter-Island Test Campaign performed in October 2012 are presented.

  5. Laboratory Demonstration of High Contrast Imaging in Multi-Star Systems

    Science.gov (United States)

    Belikov, Ruslan; Bendek, Eduardo; Pluzhnik, Eugene; Sirbu, Dan; Thomas, Sandrine

    2017-01-01

    We show laboratory results advancing the technology readiness of a method to directly image planets and disks in multi-star systems such as Alpha Centauri. This method works with almost any coronagraph (or external occulter with a DM) and requires little or no change to existing and mature hardware. Because of the ubiquity of multistar systems, this method potentially multiplies the science yield of many missions and concepts such as WFIRST, Exo-C/S, HabEx, LUVOIR, and potentially enables the detection of Earth-like planets (if they exist) around our nearest neighbor star, Alpha Centauri, with a small and low-cost space telescope such as ACESat.We identified two main challenges associated with double-star (or multi-star) systems and methods to solve them. “Multi-Star Wavefront Control” (MSWC) enables the independent suppression of starlight from more than one star, and Super-Nyquist Wavefront Control (SNWC) enables extending MSWC to the case where star separation is beyond the Nyquist limit of the deformable mirror (DM).Our lab demonstrations were conducted at the Ames Coronagraph Experiment (ACE) laboratory and proved the basic principles of both MSWC and SNWC. They involved a 32x32 deformable mirror but no coronagraph for simplicity. We used MSWC to suppress starlight independently from two stars by at least an order of magnitude, in monochromatic as well as broadband light as broad as 50%. We also used SNWC to suppress starlight at separations as far as 100 λ/D from the star, surpassing the Nyquist limit of the DM.

  6. Optimization and field demonstration of hybrid hydrogen generator/high efficiency furnace system

    Energy Technology Data Exchange (ETDEWEB)

    Entchev, E.; Coyle, I.; Szadkowski, F. [CANMET Energy Technology Centre, 1 Haanel Dr., Ottawa, Ontario K1A-1M1 (Canada); Manning, M.; Swinton, M. [National Research Council Ottawa, Ontario (Canada); Graydon, J.; Kirk, D. [University of Toronto, Toronto, Ontario (Canada)

    2009-05-15

    Hydrogen is seen as an energy carrier of the future and significant research on hydrogen generation, storage and utilization is accomplished around the world. However, an appropriate intermediate step before wide hydrogen introduction will be blending conventional fuels such as natural gas, oil or diesel with hydrogen and follow up combustion through conventional means. Due to changes in the combustion and flame characteristics of the system additional research is needed to access the limits and the impact of the fuel mix on the combustion systems performance. The hybrid system consists of a 5 kW{sub el} electrolyzer and a residential 15 kW{sub th} high efficiency gas fired furnace. The electrolyzer was integrated with the furnace gas supply and setup to replace 5-25% of the furnace natural gas flow with hydrogen. A mean for proper mixing of hydrogen with natural gas was provided and a control system for safe system operation was developed. Prior to the start of the field trial the hybrid system was investigated in laboratory environment. It was subjected to a variety of steady state and cycling conditions and a detailed performance and optimization analysis was performed with a range of hydrogen/natural gas mixtures. The optimized system was then installed at the Canadian Centre for Housing Technologies (CCHT) Experimental research house. The energy performance of the hybrid system was compared to the energy performance of an identical high efficiency furnace in the Control research house next door. (author)

  7. Demonstrating high reliability on accountability measures at the Johns Hopkins Hospital.

    Science.gov (United States)

    Pronovost, Peter J; Demski, Renee; Callender, Tiffany; Winner, Laura; Miller, Marlene R; Austin, J Matthew; Berenholtz, Sean M

    2013-12-01

    Patients continue to suffer preventable harm from the omission of evidence-based therapies. To remedy this, The Joint Commission developed core measures for therapies with strong evidence and, through the Top Performer on Key Quality Measures program, recognize hospitals that deliver those therapies to 95% of patients. The Johns Hopkins Medicine board of trustees committed to high reliability and to providing > or = 96% of patients with the recommended therapies. The Armstrong Institute for Patient Safety and Quality coordinated the core measures initiative, which targeted nine process measures for the 96% performance goal: eight Joint Commission accountability measures and one Delmarva Foundation core measure. A conceptual model for this initiative included communicating goals, building capacity with Lean Sigma methods, transparently reporting performance and establishing an accountability plan, and developing a sustainability plan. Clinicians and quality improvement staff formed one team for each targeted process measure, and Armstrong Institute staff supported the teams work. The primary performance measure was the percentage of patients who received the recommended process of care, as defined by the specifications for each of The Joint Commission's accountability measures. The > or = 96% performance goal was achieved for 82% of the measures in 2011 and 95% of the measures in 2012. With support from leadership and a conceptual model to communicate goals, use robust improvement methods, and ensure accountability, The Johns Hopkins Hospital achieved high reliability for The Joint Commission accountability measures.

  8. Development and demonstration of a high-altitude atmospheric backscatter Lidar system

    Science.gov (United States)

    Dolash, Thomas M.; Garvey, John; Leonelli, Joseph; Bradford, Mark; Rose, Lynn

    1994-06-01

    Battelle has designed and fabricated an upward-looking atmospheric backscatter lidar for high-altitude airborne applications. The compact, rugged system was assembled and integrated into a cupola on top of a Lear 36 aircraft to provide particle backscatter data and aerosol profile distributions of cirrus clouds occurring between 50,000 and 100,000 ft ASL. The high altitude airborne lidar system consists of a laser transmitter operating at 532 and 1064 nm simultaneously with output energy of 75 mJ at both wavelengths and a collecting telescope aperture of 10 inches in diameter. Laser backscatter energy is collected and directed via a dichroic beamsplitter to two avalanche photodetectors (APD) through narrow bandpass optical filters at 532 and 1064 nm. The outputs of the APDs are digitized by a 10-bit, 100-MHz transient digitizer before being recorded to a 1.2-Gbyte hard disk with IRIG timing for data analysis. This paper describes the lidar system design, predicted performance, and some of the operational challenges.

  9. Demonstration of high contrast with an obscured aperture with the WFIRST-AFTA shaped pupil coronagraph

    CERN Document Server

    Cady, Eric; An, Xin; Balasubramanian, Kunjithapatham; Diaz, Rosemary; Kasdin, N Jeremy; Kern, Brian; Kuhnert, Andreas; Nemati, Bijan; Poberezhskiy, Ilya; Riggs, A J Eldorado; Zimmer, Robert; Zimmerman, Neil

    2015-01-01

    The coronagraph instrument on the WFIRST-AFTA mission study has two coronagraphic architectures, shaped pupil and hybrid Lyot, which may be interchanged for use in different observing scenarios. Each architecture relies on newly-developed mask components to function in the presence of the AFTA aperture, and so both must be matured to a high technology readiness level (TRL) in advance of the mission. A series of milestones were set to track the development of the technologies required for the instrument; in this paper, we report on completion of WFIRST-AFTA Coronagraph Milestone 2---a narrowband $10^{-8}$ contrast test with static aberrations for the shaped pupil---and the plans for the upcoming broadband Coronagraph Milestone 5.

  10. Fluoride Salt-Cooled High-Temperature Reactor Technology Development and Demonstration Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Holcomb, David Eugene [ORNL; Flanagan, George F [ORNL; Mays, Gary T [ORNL; Pointer, William David [ORNL; Robb, Kevin R [ORNL; Yoder Jr, Graydon L [ORNL

    2013-11-01

    Fluoride salt-cooled High-temperature Reactors (FHRs) are an emerging reactor class with potentially advantageous performance characteristics, and fully passive safety. This roadmap describes the principal remaining FHR technology challenges and the development path needed to address the challenges. This roadmap also provides an integrated overview of the current status of the broad set of technologies necessary to design, evaluate, license, construct, operate, and maintain FHRs. First-generation FHRs will not require any technology breakthroughs, but do require significant concept development, system integration, and technology maturation. FHRs are currently entering early phase engineering development. As such, this roadmap is not as technically detailed or specific as would be the case for a more mature reactor class. The higher cost of fuel and coolant, the lack of an approved licensing framework, the lack of qualified, salt-compatible structural materials, and the potential for tritium release into the environment are the most obvious issues that remain to be resolved.

  11. Pea-derived vaccines demonstrate high immunogenicity and protection in rabbits against rabbit haemorrhagic disease virus.

    Science.gov (United States)

    Mikschofsky, Heike; Schirrmeier, Horst; Keil, Günther M; Lange, Bodo; Polowick, Patricia L; Keller, Wilf; Broer, Inge

    2009-08-01

    Vaccines against rabbit haemorrhagic disease virus (RHDV) are commercially produced in experimentally infected rabbits. A genetically engineered and manufactured version of the major structural protein of RHDV (VP60) is considered to be an alternative approach for vaccine production. Plants have the potential to become an excellent recombinant production system, but the low expression level and insufficient immunogenic potency of plant-derived VP60 still hamper its practical use. In this study, we analysed the expression of a novel multimeric VP60-based antigen in four different plant species, including Nicotiana tabacum L., Solanum tuberosum L., Brassica napus L. and Pisum sativum L. Significant differences were detected in the expression patterns of the novel fusion antigen cholera toxin B subunit (CTB)::VP60 (ctbvp60(SEKDEL)) at the mRNA and protein levels. Pentameric CTB::VP60 molecules were only detected in N. tabacum and P. sativum, and displayed equal levels of CTB, at approximately 0.01% of total soluble protein (TSP), and traces of detectable VP60. However, strong enhancement of the CTB protein content via self-fertilization was only observed in P. sativum, where it reached up to 0.7% of TSP. In rabbits, a strong decrease in the protective vaccine dose required from 48-400 microg potato-derived VP60 [Castanon, S., Marin, M.S., Martin-Alonso, J.M., Boga, J.A., Casais, R., Humara, J.M., Ordas, R.J. and Parra, F. (1999) Immunization with potato plants expressing VP60 protein protects against rabbit hemorrhagic disease virus. J. Virol. 73, 4452-4455; Castanon, S., Martin-Alonso, J.M., Marin, M.S., Boga, J.A., Alonso, P., Parra, F. and Ordas, R.J. (2002) The effect of the promoter on expression of VP60 gene from rabbit hemorrhagic disease virus in potato plants. Plant Sci. 162, 87-95] to 0.56-0.28 microg antigenic VP60 (measured with VP60 enzyme-linked immunosorbent assay) of crude CTB::VP60 pea extracts was demonstrated. Rabbits immunized with pea-derived CTB

  12. High temperature range recuperator. Phase II. Prototype demonstration and material and analytical studies. Final report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-04-01

    A summary of the work performed to fully evaluate the commercial potential of a unique ceramic recuperator for use in recovering waste heat from high temperature furnace exhaust gases is presented. The recuperator concept being developed consists of a vertical cylindrical heat exchange column formed from modular sections. Within the column, the gasketed modules form two helical flow passages - one for high temperature exhaust gases and one for pre-heating combustion air. The column is operated in a counterflow mode, with the exhaust gas entering at the bottom and the combustion air entering at the top of the column. Activities included design and procurement of prototype recuperator modules, construction and testing of two prototype recuperator assemblies, exposure and mechanical properties testing of candidate materials, structural analysis of the modules, and assessment of the economic viability of the concept. The results of the project indicated that the proposed recuperator concept was feasible from a technical standpoint. Economic analysis based upon recuperator performance characteristics and module manufacturing costs defined during the program indicated that 3 to 10 years (depending upon pre-heat temperature) would be required to recover the capital cost of the system in combustion air preheat applications. At this stage in the development of the recuperator, many factors in the analysis had to be assumed. Significant changes in some of the assumptions could dramatically affect the economics. For example, utilizing $2.85 per mcf for the natural gas price (as opposed to $2.00 per mcf) could reduce the payback period by more than half in certain cases. In addition, future commercial application will depend upon ceramic component manufacturing technique advances and cost reduction.

  13. High temperature range recuperator. Phase II. Prototype demonstration and material and analytical studies. Final report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-04-01

    A summary of the work performed to fully evaluate the commercial potential of a unique ceramic recuperator for use in recovering waste heat from high temperature furnace exhaust gases is presented. The recuperator concept being developed consists of a vertical cylindrical heat exchange column formed from modular sections. Within the column, the gasketed modules form two helical flow passages - one for high temperature exhaust gases and one for pre-heating combustion air. The column is operated in a counterflow mode, with the exhaust gas entering at the bottom and the combustion air entering at the top of the column. Activities included design and procurement of prototype recuperator modules, construction and testing of two prototype recuperator assemblies, exposure and mechanical properties testing of candidate materials, structural analysis of the modules, and assessment of the economic viability of the concept. The results of the project indicated that the proposed recuperator concept was feasible from a technical standpoint. Economic analysis based upon recuperator performance characteristics and module manufacturing costs defined during the program indicated that 3 to 10 years (depending upon pre-heat temperature) would be required to recover the capital cost of the system in combustion air preheat applications. At this stage in the development of the recuperator, many factors in the analysis had to be assumed. Significant changes in some of the assumptions could dramatically affect the economics. For example, utilizing $2.85 per mcf for the natural gas price (as opposed to $2.00 per mcf) could reduce the payback period by more than half in certain cases. In addition, future commercial application will depend upon ceramic component manufacturing technique advances and cost reduction.

  14. NY-ESO-1 cancer testis antigen demonstrates high immunogenicity in triple negative breast cancer.

    Science.gov (United States)

    Ademuyiwa, Foluso O; Bshara, Wiam; Attwood, Kristopher; Morrison, Carl; Edge, Stephen B; Karpf, Adam R; James, Smith A; Ambrosone, Christine B; O'Connor, Tracey L; Levine, Ellis G; Miliotto, Anthony; Ritter, Erika; Ritter, Gerd; Gnjatic, Sacha; Odunsi, Kunle

    2012-01-01

    NY-ESO-1 cancer testis (CT) antigen is an attractive candidate for immunotherapy as a result of its high immunogenicity. The aim of this study was to explore the potential for NY-ESO-1 antigen directed immunotherapy in triple negative breast cancer (TNBC) by determining the frequency of expression by immunohistochemistry (IHC) and the degree of inherent immunogenicity to NY-ESO-1. 168 TNBC and 47 ER+/HER2- primary breast cancer specimens were used to determine NY-ESO-1 frequency by IHC. As previous studies have shown that patients with a robust innate humoral immune response to CT antigens are more likely to develop CD8 T-cell responses to NY-ESO-1 peptides, we evaluated the degree to which patients with NY-ESO-1 expression had inherent immunogenicity by measuring antibodies. The relationship between NY-ESO-1 expression and CD8+ T lymphocytes was also examined. The frequency of NY-ESO-1 expression in the TNBC cohort was 16% versus 2% in ER+/HER2- patients. A higher NY-ESO-1 score was associated with a younger age at diagnosis in the TNBC patients with NY-ESO-1 expression (p = 0.026). No differences in OS (p = 0.278) or PFS (p = 0.238) by NY-ESO-1 expression status were detected. Antibody responses to NY-ESO-1 were found in 73% of TNBC patients whose tumors were NY-ESO-1 positive. NY-ESO-1 positive patients had higher CD8 counts than negative patients (p = 0.018). NY-ESO-1 is expressed in a substantial subset of TNBC patients and leads to a high humoral immune response in a large proportion of these individuals. Given these observations, patients with TNBC may benefit from targeted therapies directed against NY-ESO-1.

  15. Combined Heat and Power Systems Technology Development and Demonstration 370 kW High Efficiency Microturbine

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2015-10-14

    The C370 Program was awarded in October 2010 with the ambitious goal of designing and testing the most electrically efficient recuperated microturbine engine at a rated power of less than 500 kW. The aggressive targets for electrical efficiency, emission regulatory compliance, and the estimated price point make the system state-of-the-art for microturbine engine systems. These goals will be met by designing a two stage microturbine engine identified as the low pressure spool and high pressure spool that are based on derivative hardware of Capstone’s current commercially available engines. The development and testing of the engine occurred in two phases. Phase I focused on developing a higher power and more efficient engine, that would become the low pressure spool which is based on Capstone’s C200 (200kW) engine architecture. Phase II integrated the low pressure spool created in Phase I with the high pressure spool, which is based on Capstone’s C65 (65 kW) commercially available engine. Integration of the engines, based on preliminary research, would allow the dual spool engine to provide electrical power in excess of 370 kW, with electrical efficiency approaching 42%. If both of these targets were met coupled with the overall CHP target of 85% total combined heating and electrical efficiency California Air Resources Board (CARB) level emissions, and a price target of $600 per kW, the system would represent a step change in the currently available commercial generation technology. Phase I of the C370 program required the development of the C370 low pressure spool. The goal was to increase the C200 engine power by a minimum of 25% — 250 kW — and efficiency from 32% to 37%. These increases in the C200 engine output were imperative to meet the power requirements of the engine when both spools were integrated. An additional benefit of designing and testing the C370 low pressure spool was the possibility of developing a stand-alone product for possible

  16. High-Power Amplifier Compatible Internally Sensed Optical Phased Array for Space Debris Tracking and Maneuvering

    Science.gov (United States)

    Roberts, L.; Francis, S.; Sibley, P.; Ward, R.; Smith, C.; McClelland, D.; Shaddock, D.

    2016-09-01

    Optical phased arrays (OPAs) provide a way to scale optical power beyond the capabilities of conventional CW lasers via coherent beam combination. By stabilising the relative output phase of multiple spatially separate lasers, OPAs form a coherent optical wavefront in the far field. Since the phase of each laser can be controlled independently, OPAs also have the ability to manipulate the distribution of optical power in the far field, and therefore may provide the capability to compensate for atmospheric turbulence. Combined with their inherent scalability and high power handling capabilities, OPAs are a promising technology for CW space debris ranging and manoeuvring. The OPA presented here is unique in its ability to sense the phase of each laser internally, without requiring any external sampling optics between it and the telescope. This allows the internally sensed OPA to be constructed entirely within fibre, utilising high-power fiber amplifiers to scale optical power beyond the limits of any conventional single lasers. The total power that can be delivered by each emitter in the OPA is limited only by the onset of stimulated Brillouin scattering, a non-linear effect that clamps the amount of power that can be delivered through a fiber waveguide. A three element internally sensed OPA developed at the Australian National University has been demonstrated to coherently combine three commercial 15 Watt fiber amplifiers with an output phase stability of one 200th of a wavelength. We have also demonstrated the ability to dynamically manipulate the distribution of optical power in the far-field at a bandwidth of up to 10 kHz. Since the OPA's control system is implemented using field-programmable gate-array technology, the system may be scaled beyond 100 emitters, potentially reaching the kilowatt level optical powers required to perturb the orbit of space debris.

  17. Combined Heat and Power Systems Technology Development and Demonstration 370 kW High Efficiency Microturbine

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2015-10-14

    The C370 Program was awarded in October 2010 with the ambitious goal of designing and testing the most electrically efficient recuperated microturbine engine at a rated power of less than 500 kW. The aggressive targets for electrical efficiency, emission regulatory compliance, and the estimated price point make the system state-of-the-art for microturbine engine systems. These goals will be met by designing a two stage microturbine engine identified as the low pressure spool and high pressure spool that are based on derivative hardware of Capstone’s current commercially available engines. The development and testing of the engine occurred in two phases. Phase I focused on developing a higher power and more efficient engine, that would become the low pressure spool which is based on Capstone’s C200 (200kW) engine architecture. Phase II integrated the low pressure spool created in Phase I with the high pressure spool, which is based on Capstone’s C65 (65 kW) commercially available engine. Integration of the engines, based on preliminary research, would allow the dual spool engine to provide electrical power in excess of 370 kW, with electrical efficiency approaching 42%. If both of these targets were met coupled with the overall CHP target of 85% total combined heating and electrical efficiency California Air Resources Board (CARB) level emissions, and a price target of $600 per kW, the system would represent a step change in the currently available commercial generation technology. Phase I of the C370 program required the development of the C370 low pressure spool. The goal was to increase the C200 engine power by a minimum of 25% — 250 kW — and efficiency from 32% to 37%. These increases in the C200 engine output were imperative to meet the power requirements of the engine when both spools were integrated. An additional benefit of designing and testing the C370 low pressure spool was the possibility of developing a stand-alone product for possible

  18. Structural health monitoring of localized internal corrosion in high temperature piping for oil industry

    Science.gov (United States)

    Eason, Thomas J.; Bond, Leonard J.; Lozev, Mark G.

    2015-03-01

    Crude oil is becoming more corrosive with higher sulfur concentration, chloride concentration, and acidity. The increasing presence of naphthenic acids in oils with various environmental conditions at temperatures between 150°C and 400°C can lead to different internal degradation morphologies in refineries that are uniform, non-uniform, or localized pitting. Improved corrosion measurement technology is needed to better quantify the integrity risk associated with refining crude oils of higher acid concentration. This paper first reports a consolidated review of corrosion inspection technology to establish the foundation for structural health monitoring of localized internal corrosion in high temperature piping. An approach under investigation is to employ flexible ultrasonic thin-film piezoelectric transducer arrays fabricated by the sol-gel manufacturing process for monitoring localized internal corrosion at temperatures up to 400°C. A statistical analysis of sol-gel transducer measurement accuracy using various time of flight thickness calculation algorithms on a flat calibration block is demonstrated.

  19. High Precise Internal Friction Calculation for Force Vibration Mode

    Institute of Scientific and Technical Information of China (English)

    LIANG Li-Min; FEI Guang-Tao; SHUI Jia-Peng; CUI Ping; WU Bing; CHEN Xiao-Ming; LUI Ke-Tao

    2005-01-01

    @@ For the necessity of measuring the small phase difference of internal friction, a detailed comparison is carried out among the fast Fourier transformation (FFT), correlation function and three-parameter sine wave curve-fit methods. The comparison shows that the three-parameter sine wave curve-fit method can obtain more precise phase angle difference than correlation methods. Compared with the FFT algorithm, the three-parameter sine wave curve-fit method can obtain more precise frequency values.

  20. Experimental Demonstration of Optical Switching of Tbit/s Data Packets for High Capacity Short-Range Networks

    DEFF Research Database (Denmark)

    Medhin, Ashenafi Kiros; Kamchevska, Valerija; Hu, Hao;

    2015-01-01

    Record-high 1.28-Tbit/s optical data packets are experimentally switched in the optical domain using a LiNbO3 switch. An in-band notch-filter labeling scheme scalable to 65,536 labels is employed and a 3-km transmission distance is demonstrated.......Record-high 1.28-Tbit/s optical data packets are experimentally switched in the optical domain using a LiNbO3 switch. An in-band notch-filter labeling scheme scalable to 65,536 labels is employed and a 3-km transmission distance is demonstrated....

  1. Progressive FastICA Peel-Off and Convolution Kernel Compensation Demonstrate High Agreement for High Density Surface EMG Decomposition

    Science.gov (United States)

    Chen, Maoqi

    2016-01-01

    Decomposition of electromyograms (EMG) is a key approach to investigating motor unit plasticity. Various signal processing techniques have been developed for high density surface EMG decomposition, among which the convolution kernel compensation (CKC) has achieved high decomposition yield with extensive validation. Very recently, a progressive FastICA peel-off (PFP) framework has also been developed for high density surface EMG decomposition. In this study, the CKC and PFP methods were independently applied to decompose the same sets of high density surface EMG signals. Across 91 trials of 64-channel surface EMG signals recorded from the first dorsal interosseous (FDI) muscle of 9 neurologically intact subjects, there were a total of 1477 motor units identified from the two methods, including 969 common motor units. On average, 10.6 ± 4.3 common motor units were identified from each trial, which showed a very high matching rate of 97.85 ± 1.85% in their discharge instants. The high degree of agreement of common motor units from the CKC and the PFP processing provides supportive evidence of the decomposition accuracy for both methods. The different motor units obtained from each method also suggest that combination of the two methods may have the potential to further increase the decomposition yield. PMID:27642525

  2. Progressive FastICA Peel-Off and Convolution Kernel Compensation Demonstrate High Agreement for High Density Surface EMG Decomposition.

    Science.gov (United States)

    Chen, Maoqi; Holobar, Ales; Zhang, Xu; Zhou, Ping

    2016-01-01

    Decomposition of electromyograms (EMG) is a key approach to investigating motor unit plasticity. Various signal processing techniques have been developed for high density surface EMG decomposition, among which the convolution kernel compensation (CKC) has achieved high decomposition yield with extensive validation. Very recently, a progressive FastICA peel-off (PFP) framework has also been developed for high density surface EMG decomposition. In this study, the CKC and PFP methods were independently applied to decompose the same sets of high density surface EMG signals. Across 91 trials of 64-channel surface EMG signals recorded from the first dorsal interosseous (FDI) muscle of 9 neurologically intact subjects, there were a total of 1477 motor units identified from the two methods, including 969 common motor units. On average, 10.6 ± 4.3 common motor units were identified from each trial, which showed a very high matching rate of 97.85 ± 1.85% in their discharge instants. The high degree of agreement of common motor units from the CKC and the PFP processing provides supportive evidence of the decomposition accuracy for both methods. The different motor units obtained from each method also suggest that combination of the two methods may have the potential to further increase the decomposition yield.

  3. Progressive FastICA Peel-Off and Convolution Kernel Compensation Demonstrate High Agreement for High Density Surface EMG Decomposition

    Directory of Open Access Journals (Sweden)

    Maoqi Chen

    2016-01-01

    Full Text Available Decomposition of electromyograms (EMG is a key approach to investigating motor unit plasticity. Various signal processing techniques have been developed for high density surface EMG decomposition, among which the convolution kernel compensation (CKC has achieved high decomposition yield with extensive validation. Very recently, a progressive FastICA peel-off (PFP framework has also been developed for high density surface EMG decomposition. In this study, the CKC and PFP methods were independently applied to decompose the same sets of high density surface EMG signals. Across 91 trials of 64-channel surface EMG signals recorded from the first dorsal interosseous (FDI muscle of 9 neurologically intact subjects, there were a total of 1477 motor units identified from the two methods, including 969 common motor units. On average, 10.6±4.3 common motor units were identified from each trial, which showed a very high matching rate of 97.85±1.85% in their discharge instants. The high degree of agreement of common motor units from the CKC and the PFP processing provides supportive evidence of the decomposition accuracy for both methods. The different motor units obtained from each method also suggest that combination of the two methods may have the potential to further increase the decomposition yield.

  4. Overview of ERA Integrated Technology Demonstration (ITD) 51A Ultra-High Bypass (UHB) Integration for Hybrid Wing Body (HWB)

    Science.gov (United States)

    Flamm, Jeffrey D.; James, Kevin D.; Bonet, John T.

    2016-01-01

    The NASA Environmentally Responsible Aircraft Project (ERA) was a ve year project broken into two phases. In phase II, high N+2 Technical Readiness Level demonstrations were grouped into Integrated Technology Demonstrations (ITD). This paper describes the work done on ITD-51A: the Vehicle Systems Integration, Engine Airframe Integration Demonstration. Refinement of a Hybrid Wing Body (HWB) aircraft from the possible candidates developed in ERA Phase I was continued. Scaled powered, and unpowered wind- tunnel testing, with and without acoustics, in the NASA LARC 14- by 22-foot Subsonic Tunnel, the NASA ARC Unitary Plan Wind Tunnel, and the 40- by 80-foot test section of the National Full-Scale Aerodynamics Complex (NFAC) in conjunction with very closely coupled Computational Fluid Dynamics was used to demonstrate the fuel burn and acoustic milestone targets of the ERA Project.

  5. RESORBABLE HIGH-STRENGTH ROD FOR FRACTURE INTERNAL FIXATION

    Institute of Scientific and Technical Information of China (English)

    杨团民; 刘淼; 杨爱玲; 石宗利; 邱希江; 李毅; 同志超; 韩月

    2004-01-01

    Objective To find an ideal biomaterial for internal fixation. Methods Forty rabbits with fracture of the femur diaphysis (superiorcondyle) were treated by intramedullary nailing of femur with composites rod of resorbable DL-polylactic acid (PDLLA)-calcium metaphosphate (CMP), while steinmann's pin as control. The fracture healing, the material degradation and its mechanical properties were studied by X-ray films, macroscopic, microscopic and electron microscopic observations. Results No significant inflammatory reaction was found, and all the osteotomies were healed, while material was resorbed. Conclusion The PDLLA-CMP has excellent biocompatibility and mechanical properties, and it can be a promising implant material in orthopaedics surgery.

  6. Small-scale demonstration of high-level radioactive waste processing and solidification using actual SRP waste

    Energy Technology Data Exchange (ETDEWEB)

    Okeson, J K; Galloway, R M; Wilhite, E L; Woolsey, G B; B, Ferguson R

    1980-01-01

    A small-scale demonstration of the high-level radioactive waste solidification process by vitrification in borosilicate glass is being conducted using 5-6 liter batches of actual waste. Equipment performance and processing characteristics of the various unit operations in the process are reported and, where appropriate, are compared to large-scale results obtained with synthetic waste.

  7. George W. Wingate High School, Bilingual Demonstration College Preparatory Program. O.E.E. Evaluation Report, 1982-1983.

    Science.gov (United States)

    Sjostrom, Barbara R.; Sica, Michael

    The Bilingual Demonstration College Preparatory Program, in its second year of funding, provided English as a second language (ESL) and native language instruction, in addition to bilingual instruction in mathematics, social studies, and science, to 120 Spanish-speaking students in grades 9-12 at George W. Wingate High School (Brooklyn, New York).…

  8. High speed and high precision pyramid wavefront sensor: In labs validation and preparation to on sky demonstration

    Science.gov (United States)

    El Hadi, K.; Fusco, T.; Sauvage, J.-F.; Neichel, B.

    2014-07-01

    Since the introduction of the pyramid wavefront sensor [P-WFS] concept (Ragazzoni), numerous investigations have clearly shown its ability to achieve better performance (sensitivity, dynamic range) than the standard Shack-Hartman [SH-WFS]. It has recently been successfully implemented on LBT and has already been provided very interesting results (Esposito et al). Then, most of the future adaptive optics [AO] systems, mainly for ELT instrumentation, will probably integrate one or several pyramidal sensors. However, the pyramid behavior still needs to be extensively studied in order to ensure its optimization in real conditions of operation. So, the coupling in an AO loop and the control of this type of sensor is fundamental for an efficient implementation in the future AO systems. At LAM, we recently carried out in labs demonstration of an extremely performant pyramid sensor (up to 60x60), using particularly an OCAM2 detector (1.5 kHz, RON close to zero). Both modulated and fixed configurations are investigated and compared with numerical models. The P-WFS is being coupled with a dedicated RTC and a 12×12 DM to achieve a first AO closed loop operation. For modulation, a fine control is needed: a specific electronic module, interfaced with the RTC, is being developed to drive the TT mirror (OCAM2 triggering). Then, various TT mirrors are under test to determine a suitable one. After tests of the pyramid specificities (optimiziation, calibration and operation procedures), the P-WFS will be tested on-sky and compared with an already existing SH-WFS (using the same OCAM²) on the ONERA bench.

  9. Observing Exoplanets with High-dispersion Coronagraphy. II. Demonstration of an Active Single-mode Fiber Injection Unit

    Science.gov (United States)

    Mawet, D.; Ruane, G.; Xuan, W.; Echeverri, D.; Klimovich, N.; Randolph, M.; Fucik, J.; Wallace, J. K.; Wang, J.; Vasisht, G.; Dekany, R.; Mennesson, B.; Choquet, E.; Delorme, J.-R.; Serabyn, E.

    2017-04-01

    High-dispersion coronagraphy (HDC) optimally combines high-contrast imaging techniques such as adaptive optics/wavefront control plus coronagraphy to high spectral resolution spectroscopy. HDC is a critical pathway toward fully characterizing exoplanet atmospheres across a broad range of masses from giant gaseous planets down to Earth-like planets. In addition to determining the molecular composition of exoplanet atmospheres, HDC also enables Doppler mapping of atmosphere inhomogeneities (temperature, clouds, wind), as well as precise measurements of exoplanet rotational velocities. Here, we demonstrate an innovative concept for injecting the directly imaged planet light into a single-mode fiber, linking a high-contrast adaptively corrected coronagraph to a high-resolution spectrograph (diffraction-limited or not). Our laboratory demonstration includes three key milestones: close-to-theoretical injection efficiency, accurate pointing and tracking, and on-fiber coherent modulation and speckle nulling of spurious starlight signal coupling into the fiber. Using the extreme modal selectivity of single-mode fibers, we also demonstrated speckle suppression gains that outperform conventional image-based speckle nulling by at least two orders of magnitude.

  10. Arctic Sovereignty Disputes: International Relations Theory in the High North

    Science.gov (United States)

    2011-12-01

    Sea USGS United States Geological Service xii THIS PAGE INTENTIONALLY LEFT BLANK xiii ACKNOWLEDGMENTS I would like to express...Osica, “The High North as a New Area of Cooperation and Rivalry,” Nowa Europa Special Issue, vol. 1, no. 4, 2010. 16 Northwest Passage indicates...Osica, Olaf. “The High North as a New Area of Cooperation and Rivalry.” Nowa Europa Special Issue, vol. I, no. 4, 2010. Regjeringen Norway. “Joint

  11. Simultaneous high-speed internal and external flow measurements for a high-pressure diesel nozzle

    CERN Document Server

    Purwar, Harsh; Méès, Loïc; Rozé, Claude; Blaisot, Jean-Bernard; Michard, Marc; Maligne, David

    2016-01-01

    We present an extensive experimental study focused on understanding the impact of cavitation in a high-pressure diesel nozzle on the macroscopic properties of fuel spray. Several high-speed videos of the liquid flow through a transparent, asymmetric cylindrical nozzle with a single orifice (phi = 0.35 mm) are recorded along with the videos of the resulting spray in the near-nozzle region, issued with an injection pressure of 300 bar at a frame-rate of 75 kHz. The high-repetition images of the internal flow are then used to estimate the onset of cavitation inside the transparent nozzle and the probability of development of cavitation in different regions of the nozzle with an average estimate of the amount of cavitation with time. On the other hand, recorded spray images are used to study spray penetration, cone-angles and velocity from the start of fuel injection. A novel approach is proposed for the measurement of perturbations that occur in form of big liquid structures along the spray boundary.

  12. Defining High-Energy Calibration Standards: IACHEC (International Astronomical Consortium for High-Energy Calibration)

    Science.gov (United States)

    Sembay, S.; Guainazzi, M.; Plucinsky, P.; Nevalainen, J.

    2010-07-01

    The International Astronomical Consortium for High-Energy Calibration (IACHEC) aims to provide standards for high energy calibration and supervise cross-calibration between different X-ray and Gamma-ray observatories. This goal is reached through Working Groups, involving around 40 astronomers worldwide. In these Groups, IACHEC members co-operate to define calibration standards and procedures. Their scope is primarily a practical one: a set of astronomical sources, data and results (eventually published in refereed journals) will be the outcome of a co-ordinated and standardized analysis of reference sources (``high-energy standard candles''). We briefly describe here just two of the many studies undertaken by the IACHEC; a cross-calibration analysis of O and Ne line fluxes from the thermal SNR 1E0102.2-7219, and at higher energies a comparison study of a sample of cluster temperatures and fluxes. A more detailed picture of the activities of the IACHEC is available via the information portal at http://web.mit.edu/iachec/.

  13. INTERNATIONAL CONFERENCE ON ULTRASHORT HIGH-ENERGY RADIATION AND MATTER

    Energy Technology Data Exchange (ETDEWEB)

    Wootton, A J

    2004-01-15

    The workshop is intended as a forum to discuss the latest experimental, theoretical and computational results related to the interaction of high energy radiation with matter. High energy is intended to mean soft x-ray and beyond, but important new results from visible systems will be incorporated. The workshop will be interdisciplinary amongst scientists from many fields, including: plasma physics; x-ray physics and optics; solid state physics and material science; biology ; quantum optics. Topics will include, among other subjects: understanding damage thresholds for x-ray interactions with matter developing {approx} 5 keV x-ray sources to investigate damage; developing {approx} 100 keV Thomsom sources for material studies; developing short pulse (100 fs and less) x-ray diagnostics; developing novel X-ray optics; and developing models for the response of biological samples to ultra intense, sub ps x-rays high-energy radiation.

  14. High-intensity drying processes: Impulse drying. Progress report on furnish evaluations for impulse drying commercialization demonstration

    Energy Technology Data Exchange (ETDEWEB)

    Orloff, D.I.; Phelan, P.M.; Rudman, I.

    1995-02-01

    Laboratory and pilot scale experiments were performed to identify potential furnishes and operating parameters for upcoming high-speed pilot scale trials and commercial demonstration of impulse drying of heavy weight grades of paper. Results indicate that hydrodynamic specific surface is highly dependent on sheet formation and prehandling. Mill refined pulp and machine paper were comparable to laboratory prepared samples in regards to permeability and impulse drying. Process variables such as platen surface coating, felt type, felt moisture, and presteaming temperature profiles were investigated. Substantial improvements in sheet smoothness were achieved.

  15. International Space Station (ISS) Oxygen High Pressure Storage Management

    Science.gov (United States)

    Lewis, John R.; Dake, Jason; Cover, John; Leonard, Dan; Bohannon, Carl

    2004-01-01

    High pressure oxygen onboard the ISS provides support for Extra Vehicular Activities (EVA) and contingency metabolic support for the crew. This high pressure 02 is brought to the ISS by the Space Shuttle and is transferred using the Oxygen Recharge Compressor Assembly (ORCA). There are several drivers that must be considered in managing the available high pressure 02 on the ISS. The amount of O2 the Shuttle can fly up is driven by manifest mass limitations, launch slips, and on orbit Shuttle power requirements. The amount of 02 that is used from the ISS high pressure gas tanks (HPGT) is driven by the number of Shuttle docked and undocked EVAs, the type of EVA prebreath protocol that is used and contingency use of O2 for metabolic support. Also, the use of the ORCA must be managed to optimize its life on orbit and assure that it will be available to transfer the planned amount of O2 from the Shuttle. Management of this resource has required long range planning and coordination between Shuttle manifest on orbit plans. To further optimize the situation hardware options have been pursued.

  16. High-efficiency and high-resolution apertureless plasmonic near-field probe under internal illumination

    Science.gov (United States)

    Jiang, R. H.; Chou, H. C.; Chu, J. Y.; Chen, C.; Yen, T. J.

    2016-09-01

    Near-field scanning optical microscopy (NSOM) offers subwavelength optical resolution beyond the diffraction limit, enabling practical applications in optical imaging, sensing and nanolithography. However, due to the sub-100 nm size of apertures, conventional NSOM aperture probes suffer from the constrains of the strong attenuation of the throughput and limited the spatial resolution. To solve the problem, we designed a novel scheme for apertureless plasmonic probes with radial internal illumination. Employing non-periodic multi-rings geometry for plasmonic excitations, surface plasmons adiabatically nanofocuse energy at tip and the full width at half maximum of the optimal design is 18 nm. The proposed probe was optimized with 2D finite-difference time-domain (FDTD) analysis and realistic parabolic probe geometries. Comprehensive electromagnetic simulation shows that the optimal probe feature obeys Fabry-Pérot condition on the plasmonic metallic wall, giving rise to substantial field enhancement up to 6 orders of magnitude greater than conventional aperture probes without degrading its spatial resolution. We fabricated the proposed probe which possesses apex angle ( 22 degree) and tip radius ( 30 nm). Finally, the proposed near field plasmonic probe effectively combining the high resolution of apertureless probes with high throughput can enable the proposed plasmonic NSOM probe as a practical tool for applications in near field optical microscopy.

  17. BEYOND THE WORK-LIFE BALANCE: FAMILY AND INTERNATIONAL MOBILITY OF THE HIGHLY SKILLED

    Directory of Open Access Journals (Sweden)

    Núria Vergés Bosch

    2013-10-01

    Full Text Available International mobility of the highly skilled has become one of the cornerstones of development in the current knowledge society. Correspondingly, highly skilled personnel are impelled to move abroad in order to improve their competences and build influential professional networks. Mobility implies some advantages involving personal, social and family opportunities when movers experience handicaps in their country of origin. For movers, mobility becomes a new challenge beyond the work-family balance, particularly for women who usually take on the lion’s share of childcare and domestic tasks within the family. The literature exploring the gender dimension in relation to international mobility points to complex outcomes. Firstly, women are taking on a more active role in international mobility processes, even when they have family. Secondly, family and international mobility are interrelated both for men and for women, although family could become a hindrance, particularly for women. Thirdly, international mobility and women’s career development may interfere with family formation or modify traditional family values. Finally, families moving abroad constitute a challenge for public policy, since they present a new area of problems. We aim to analyse the relationship between international mobility and family based on in-depth interviews from a purposive sample of highly skilled personnel in science and technology. The results of our research suggest that international mobility of the highly skilled has effects on the family and vice versa; however, while international mobility and family are compatible, measures and policies to reconcile them are still insufficient.

  18. The 9th Beijing Chitec,Platform for International High & New Technology Communication

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    @@ The 9th China Beijing International High-tech Expo The 9th Chitec, Co-organized by The Ministry of Science and Technology, The Ministry of Commerce, The Ministry of Education, The Ministry of Information Industry, China Council for the Promotion of International Trade, State Intellectual Property office and Beijing Government, was held in Beijing from May 22 to May 27.

  19. Metamaterial Demonstrates Both a High Refractive Index and Extremely Low Reflection in the 0.3-THz Band

    Science.gov (United States)

    Ishihara, Koki; Suzuki, Takehito

    2017-07-01

    Communication and imaging in the terahertz waveband have advanced rapidly in offering industrial applications. However, optical elements such as collimated lenses in the terahertz waveband are bulky compared with the wavelength due to the lack of naturally occurring substances with a high refractive index and low loss. It is essential to miniaturize optical elements in the terahertz waveband for industrial application. Metamaterials consisting of subwavelength structures can arbitrarily control permittivity and permeability and provide a range of refractive indices. Here, we demonstrate a metamaterial with both a high refractive index and extremely low reflection consisting of symmetrically aligned paired cut metal wires with 18,800 units on the front and back surfaces of a dielectric substrate. Measurements by terahertz time-domain spectroscopy (THz-TDS) confirm a high effective refractive index of 6.66 + j0.123, extremely low reflection power of 1.16%, and the unprecedented high figure of merit (FOM = |n real/n imag|) of above 300 in the 0.3-THz band. Components with such specifications would enable miniature, high-performance optical elements in the terahertz waveband such as ultrathin flat antennas with high directivity. Further, the concept of the metamaterial with both a high refractive index and extremely low reflection potentially offers a wide range of attractive applications such as solid immersion lenses and cloaking devices.

  20. Metamaterial Demonstrates Both a High Refractive Index and Extremely Low Reflection in the 0.3-THz Band

    Science.gov (United States)

    Ishihara, Koki; Suzuki, Takehito

    2017-09-01

    Communication and imaging in the terahertz waveband have advanced rapidly in offering industrial applications. However, optical elements such as collimated lenses in the terahertz waveband are bulky compared with the wavelength due to the lack of naturally occurring substances with a high refractive index and low loss. It is essential to miniaturize optical elements in the terahertz waveband for industrial application. Metamaterials consisting of subwavelength structures can arbitrarily control permittivity and permeability and provide a range of refractive indices. Here, we demonstrate a metamaterial with both a high refractive index and extremely low reflection consisting of symmetrically aligned paired cut metal wires with 18,800 units on the front and back surfaces of a dielectric substrate. Measurements by terahertz time-domain spectroscopy (THz-TDS) confirm a high effective refractive index of 6.66 + j0.123, extremely low reflection power of 1.16%, and the unprecedented high figure of merit (FOM = | n real/ n imag|) of above 300 in the 0.3-THz band. Components with such specifications would enable miniature, high-performance optical elements in the terahertz waveband such as ultrathin flat antennas with high directivity. Further, the concept of the metamaterial with both a high refractive index and extremely low reflection potentially offers a wide range of attractive applications such as solid immersion lenses and cloaking devices.

  1. Centrifugal Step Emulsification can Produce Water in Oil Emulsions with Extremely High Internal Volume Fractions

    Directory of Open Access Journals (Sweden)

    Friedrich Schuler

    2015-08-01

    Full Text Available The high throughput preparation of emulsions with high internal volume fractions is important for many different applications, e.g., drug delivery. However, most emulsification techniques reach only low internal volume fractions and need stable flow rates that are often difficult to control. Here, we present a centrifugal high throughput step emulsification disk for the fast and easy production of emulsions with high internal volume fractions above 95%. The disk produces droplets at generation rates of up to 3700 droplets/s and, for the first time, enables the generation of emulsions with internal volume fractions of >97%. The coefficient of variation between droplet sizes is very good (4%. We apply our system to show the in situ generation of gel emulsion. In the future, the recently introduced unit operation of centrifugal step emulsification may be used for the high throughput production of droplets as reaction compartments for clinical diagnostics or as starting material for micromaterial synthesis.

  2. Demonstrating the Model Nature of the High-Temperature Superconductor HgBa2CuO4+d

    Energy Technology Data Exchange (ETDEWEB)

    Barisic, Neven; Li, Yuan; Zhao, Xudong; Cho, Yong-Chan; Chabot-Couture, Guillaume; Yu, Guichuan; Greven, Martin; /SLAC, SSRL /Boskovic Inst., Zagreb /Stanford U., Phys. Dept. /Jilin U. /Stanford U., Appl. Phys. Dept.

    2008-09-30

    The compound HgBa{sub 2}CuO{sub 4+{delta}} (Hg1201) exhibits a simple tetragonal crystal structure and the highest superconducting transition temperature (T{sub c}) among all single Cu-O layer cuprates, with T{sub c} = 97 K (onset) at optimal doping. Due to a lack of sizable single crystals, experimental work on this very attractive system has been significantly limited. Thanks to a recent breakthrough in crystal growth, such crystals have now become available. Here, we demonstrate that it is possible to identify suitable heat treatment conditions to systematically and uniformly tune the hole concentration of Hg1201 crystals over a wide range, from very underdoped (T{sub c} = 47 K, hole concentration p {approx} 0.08) to overdoped (T{sub c} = 64 K, p {approx} 0.22). We then present quantitative magnetic susceptibility and DC charge transport results that reveal the very high-quality nature of the studied crystals. Using XPS on cleaved samples, we furthermore demonstrate that it is possible to obtain large surfaces of good quality. These characterization measurements demonstrate that Hg1201 should be viewed as a model high-temperature superconductor, and they provide the foundation for extensive future experimental work.

  3. Thermodynamic analysis for high burn-up fuel internal chemistry

    Energy Technology Data Exchange (ETDEWEB)

    Fuji, Kensho; Kyoh, Bunkei [Kinki Univ., Higashi-Osaka, Osaka (Japan). Faculty of Science and Technology

    1997-09-01

    Chemical states of fission products and actinide elements in high burn-up LWR fuel pellets have been analyzed thermodynamically using the computer program SOLGASMIX-PV. Calculations with this computer code have been performed for a complex multi-component system, which comprises 54 chemical species. The analysis shows that neither alkali nor alkaline-earth uranates are formed, but alkali and alkaline-earth molybdates exist in irradiated LWR fuel pellets in contrast with their post irradiation examinations. These molybdates tend to increase with increasing oxygen potential in the fuel under operating conditions, whereas the zirconates decrease. (author)

  4. Internalized weight stigma moderates eating behavior outcomes in women with high BMI participating in a healthy living program.

    Science.gov (United States)

    Mensinger, Janell L; Calogero, Rachel M; Tylka, Tracy L

    2016-07-01

    Weight stigma is a significant socio-structural barrier to reducing health disparities and improving quality of life for higher weight individuals. The aim of this study was to examine the impact of internalized weight stigma on eating behaviors after participating in a randomized controlled trial comparing the health benefits of a weight-neutral program to a conventional weight-management program for 80 community women with high body mass index (BMI > 30, age range: 30-45). Programs involved 6 months of facilitator-guided weekly group meetings using structured manuals. Assessments occurred at baseline, post-intervention (6 months), and 24-months post-randomization. Eating behavior outcome measurements included the Eating Disorder Examination-Questionnaire and the Intuitive Eating Scale. Intention-to-treat linear mixed models were used to test for higher-order interactions between internalized weight stigma, group, and time. Findings revealed significant 3-way and 2-way interactions between internalized weight stigma, group, and time for disordered and adaptive eating behaviors, respectively. Only weight-neutral program participants with low internalized weight stigma improved global disordered eating scores. Participants from both programs with low internalized weight stigma improved adaptive eating at 6 months, but only weight-neutral program participants maintained changes at follow-up. Participants with high internalized weight stigma demonstrated no changes in disordered and adaptive eating, regardless of program. In order to enhance the overall benefit from weight-neutral approaches, these findings underscore the need to incorporate more innovative and direct methods to reduce internalized weight stigma for women with high BMI.

  5. Demonstration of 20-Gbit/s high-speed Bessel beam encoding/decoding link with adaptive turbulence compensation.

    Science.gov (United States)

    Chen, Shi; Li, Shuhui; Zhao, Yifan; Liu, Jun; Zhu, Long; Wang, Andong; Du, Jing; Shen, Li; Wang, Jian

    2016-10-15

    By mapping traditional amplitude modulation to spatial modulation and employing adaptive optics compensation technique, we propose and experimentally demonstrate a high-speed Bessel beam encoding/decoding free-space optical link through atmospheric turbulence. The Bessel beam encoding/decoding speed is not limited by the conventional slow switching response of a spatial light modulator (SLM) but is fully determined by the modulation rate of an intensity modulator, which easily supports tens of gigabits per second modulation and resultant encoding/decoding. We use an SLM loaded with a pseudorandom phase mask to emulate atmospheric turbulence in the laboratory environment. An adaptive optics closed loop is used to sense the phase distortion of an extra probe Gaussian beam and then compensate the distorted Bessel beams. A 20-Gbit/s Bessel beam encoding/decoding link with adaptive turbulence compensation is demonstrated in the experiment, showing favorable operation performance.

  6. El Día de la Luz II (The Day of Light II): optics demonstration for high school students

    Science.gov (United States)

    Chaitanya K., S.; Mathew, Manoj; Volpe, Giorgio; Takayama, Osamu; Valencia, Alejandra

    2009-06-01

    Photonics is an upcoming field that offers immense possibilities in frontier science, technology, and industry. The topic needs to be introduced among the young students to motivate their interest and passion for light. However, the potential of optics and photonics as a very exciting part of science is not always fully explored in high school education. With the motivation to contribute an initiative along these lines, a two-hour program was developed and successfully implemented at ICFO-The institute of photonics sciences. Further recent efforts were directed towards the improvement of this program which resulted in the advanced version. This improved version focuses on explaining the ray and wave nature of light, as well as the demonstration of the conservation of energy in relation to optics. The event was organized and the demonstrations were carried out by ICFO PhD students enrolled in the ICFO Optical Society of America (OSA) and SPIE student chapters.

  7. Direct demonstration of insulin receptor internalization. A quantitative electron microscopic study of covalently bound /sup 125/I-photoreactive insulin incubated with isolated hepatocytes

    Energy Technology Data Exchange (ETDEWEB)

    Gorden, P.; Carpentier, J.L.; Moule, M.L.; Yip, C.C.; Orci, L.

    1982-07-01

    When /sup 125/I-insulin is incubated with isolated rodent hepatocytes at 37 degrees C, the ligand initially binds to the plasma membrane of the cell and is subsequently internalized by adsorptive endocytosis. To confirm directly that the insulin receptor is internalized with the ligand, we covalently linked photoreactive /sup 125/I-N sigma B29 (azidobenzoyl) insulin to its specific hepatocyte receptor and followed its fate by quantitative electron microscopic autoradiography. We found that the covalently linked photoreactive insulin is internalized by the cell in fashion analogous to the internalization of ordinary /sup 125/I-insulin, indicating that, at least under these conditions, the insulin receptor is internalized with the ligand.

  8. Flexible and internal series-connected supercapacitors with high working voltage using ultralight porous carbon nanofilms

    Science.gov (United States)

    Li, Xiaoyan; Zhou, Man; Wang, Jun; Ge, Fengyan; Zhao, Yaping; Komarneni, Sridhar; Cai, Zaisheng

    2017-02-01

    Highly flexible carbon nanofibers with hierarchical nanostructure, which provide an excellent distribution of differently functionalized-carbon nanotubes and terephthalic acid, were prepared cost-effectively and demonstrated as binder-free electrodes. Symmetric solid-state supercapacitors were then fabricated and could be operated reversibly in the voltage range of 0-1.8 V with excellent electrochemical performance due to the hierarchical porosity and hybrid architecture. Furthermore, internal series-connected supercapacitors based on the prepared porous carbon nanofibers were designed and fabricated. Such supercapacitors were found to be flexible enough to be rolled up or twisted with constant capacitive performance at a high working voltage of up to 3.6 V and exhibited a 38.9% increase in energy density than that of the single-cell supercapacitor. This one-step approach leads to simplicity of operation and economical efficiency for fabricating lightweight supercapacitors with high working voltage and energy density, which may be beneficial for the development of flexible and wearable energy storage devices.

  9. 5th International conference on High Energy Density Laboratory Astrophysics

    CERN Document Server

    Kyrala, G.A

    2005-01-01

    During the past several years, research teams around the world have developed astrophysics-relevant utilizing high energy-density facilities such as intense lasers and z-pinches. Research is underway in many areas, such as compressible hydrodynamic mixing, strong shock phenomena, radiation flow, radiative shocks and jets, complex opacities, equations o fstat, and relativistic plasmas. Beyond this current research and the papers it is producing, plans are being made for the application, to astrophysics-relevant research, of the 2 MJ National Ignition Facility (NIF) laser at Lawrence Livermore National Laboratory; the 600 kj Ligne d'Intergration Laser (LIL) and the 2 MJ Laser Megajoule (LMJ) in Bordeaux, France; petawatt-range lasers now under construction around the world; and current and future Z pinches. The goal of this conference and these proceedings is to continue focusing and attention on this emerging research area. The conference brought together different scientists interested in this emerging new fi...

  10. High efficiency proportional neutron detector with solid liner internal structures

    Science.gov (United States)

    Kisner, Roger Allen; Holcomb, David Eugene; Brown, Gilbert M.

    2014-08-05

    A tube-style neutron detector, a panel-style neutron detector incorporating a plurality of tube-style neutron detectors, and a panel-style neutron detector including a plurality of anode wires are provided. A plurality of channels is provided in a neutron detector such that each channel has an inner surface of a coating layer including a neutron-absorbing material. A wire anode is provided at end of each channel so that electrons generated by a charged daughter particle generated by a neutron are collected to detect a neutron-matter interaction. Moderator units can be incorporated into a neutron detector to provide improved detection efficiencies and/or to determine neutron energy spectrum. Gas-based proportional response from the neutron detectors can be employed for special nuclear material (SNM) detection. This neutron detector can provide similar performance to .sup.3He-based detectors without requiring .sup.3He and without containing toxic, flammable, or high-pressure materials.

  11. International Asteroid Search Campaign: An Educational Outreach Program in Astronomy for High Schools and Colleges

    Science.gov (United States)

    Miller, J. P.; Juliano, D.; Davis, J. W.; Holmes, R. E.; Devore, H.; Raab, H.; Pennypacker, C. R.; White, G. L.; Gould, A.

    2008-03-01

    The International Asteroid Search Campaign is an Internet-based program for high schools and colleges. Schools receive images, analyzed by students searching for asteroids and NEOs. Students have 71 asteroid discoveries and 1376 NEO observations.

  12. Development and Demonstration of a New Generation High Efficiency 10kW Stationary Fuel Cell System

    Energy Technology Data Exchange (ETDEWEB)

    Howell, Thomas Russell

    2013-04-30

    The overall project objective is to develop and demonstrate a polymer electrolyte membrane fuel cell combined heat and power (PEMFC CHP) system that provides the foundation for commercial, mass produced units which achieve over 40% electrical efficiency (fuel to electric conversion) from 50-100% load, greater than 70% overall efficiency (fuel to electric energy + usable waste heat energy conversion), have the potential to achieve 40,000 hours durability on all major process components, and can be produced in high volumes at under $400/kW (revised to $750/kW per 2011 DOE estimates) capital cost.

  13. International company restructuring and the effects on high-skilled employees in lead companies

    DEFF Research Database (Denmark)

    Hansen, Nana Wesley

    2016-01-01

    insulated from international restructuring processes. However, effects on wage and working conditions vary dependent on the motivation for restructuring, and as companies learn to take advantage of pools of skilled employees abroad. Continued international restructuring appear to challenge the insulation......International company restructuring involving knowledge intensive jobs causes increasing concern about the effect on the globalization of high-skilled employees. Drawing on case studies in four Danish-based companies, this article argues that high-skilled employees in lead companies are rarely...

  14. Initial demonstration of the NRC`s capability to conduct a performance assessment for a High-Level Waste Repository

    Energy Technology Data Exchange (ETDEWEB)

    Codell, R.; Eisenberg, N.; Fehringer, D.; Ford, W.; Margulies, T.; McCartin, T.; Park, J.; Randall, J.

    1992-05-01

    In order to better review licensing submittals for a High-Level Waste Repository, the US Nuclear Regulatory Commission staff has expanded and improved its capability to conduct performance assessments. This report documents an initial demonstration of this capability. The demonstration made use of the limited data from Yucca Mountain, Nevada to investigate a small set of scenario classes. Models of release and transport of radionuclides from a repository via the groundwater and direct release pathways provided preliminary estimates of releases to the accessible environment for a 10,000 year simulation time. Latin hypercube sampling of input parameters was used to express results as distributions and to investigate model sensitivities. This methodology demonstration should not be interpreted as an estimate of performance of the proposed repository at Yucca Mountain, Nevada. By expanding and developing the NRC staff capability to conduct such analyses, NRC would be better able to conduct an independent technical review of the US Department of Energy (DOE) licensing submittals for a high-level waste (HLW) repository. These activities were divided initially into Phase 1 and Phase 2 activities. Additional phases may follow as part of a program of iterative performance assessment at the NRC. The NRC staff conducted Phase 1 activities primarily in CY 1989 with minimal participation from NRC contractors. The Phase 2 activities were to involve NRC contractors actively and to provide for the transfer of technology. The Phase 2 activities are scheduled to start in CY 1990, to allow Sandia National Laboratories to complete development and transfer of computer codes and the Center for Nuclear Waste Regulatory Analyses (CNWRA) to be in a position to assist in the acquisition of the codes.

  15. Factors influencing adjustment of high school students in an international exchange program.

    Science.gov (United States)

    Furukawa, T; Shibayama, T

    1994-12-01

    The present study aims to investigate which psychosocial factors measured before departure are predictive of various aspects of intercultural adjustment among Japanese teenagers enrolled in a foreign exchange student program. A cohort of 188 Japanese high school students, who had been selected to spend 1 year in various countries of the world under the aegis of an international exchange student program, was administered the Maudsley Personality Inventory, the Parental Bonding Instrument, the General Health Questionnaire and the People in Your Life Scale before their departure from Japan. Six months after arrival in the host community, they were again asked to complete the General Health Questionnaire and relevant sections of the People in Your Life Scale. The students showed highly significant and substantial deterioration in all three areas of psychosocial adjustment: they reported more psychiatric symptoms, less availability of social relationships, and less satisfaction with them in their host community than at home. Psychiatric symptoms were best predicted by perceived adequacy of intimate attachments and neuroticism measured before departure, availability of social relationships abroad by availability and adequacy of social relationships and adequacy of attachments at home, and satisfaction with social relationships abroad by satisfaction with attachments at home and by paternal care before age 16. This study thus demonstrates that studying abroad entails deterioration in psychosocial adjustment of the adolescents studied and that different factors are influential in different aspects of adjustment. The importance of a prospective and multifaceted study of intercultural adjustment process is emphasized.

  16. Proof-of-principle demonstration of Nb3Sn superconducting radiofrequency cavities for high Q0 applications

    Science.gov (United States)

    Posen, S.; Liepe, M.; Hall, D. L.

    2015-02-01

    Many future particle accelerators require hundreds of superconducting radiofrequency (SRF) cavities operating with high duty factor. The large dynamic heat load of the cavities causes the cryogenic plant to make up a significant part of the overall cost of the facility. This contribution can be reduced by replacing standard niobium cavities with ones coated with a low-dissipation superconductor such as Nb3Sn. In this paper, we present results for single cell cavities coated with Nb3Sn at Cornell. Five coatings were carried out, showing that at 4.2 K, high Q0 out to medium fields was reproducible, resulting in an average quench field of 14 MV/m and an average 4.2 K Q0 at quench of 8 × 109. In each case, the peak surface magnetic field at quench was well above Hc1, showing that it is not a limiting field in these cavities. The coating with the best performance had a quench field of 17 MV/m, exceeding gradient requirements for state-of-the-art high duty factor SRF accelerators. It is also shown that—taking into account the thermodynamic efficiency of the cryogenic plant—the 4.2 K Q0 values obtained meet the AC power consumption requirements of state-of-the-art high duty factor accelerators, making this a proof-of-principle demonstration for Nb3Sn cavities in future applications.

  17. Internal friction mechanism of Fe-19Mn alloy at low and high strain amplitude

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Shuke, E-mail: huangshuke@163.com [Institute of Machinery Manufacturing Technology, China Academy of Engineering Physics, Mianyang, Sichuan 621900 (China); Huang, Wenrong; Liu, Jianhui [Institute of Machinery Manufacturing Technology, China Academy of Engineering Physics, Mianyang, Sichuan 621900 (China); Teng, Jin; Li, Ning; Wen, Yuhua [School of Manufacturing Science and Engineering, Sichuan University, Chengdu, Sichuan 610065 (China)

    2013-01-10

    Fe-Mn damping alloy, which can decrease the vibrating and noise effectively, will be widely applied to household appliances, automobiles, industrial facilities, etc. In this paper, the internal friction mechanism of Fe-19Mn alloy at low strain amplitude (10{sup -5} range) and high strain amplitude (10{sup -4} range) was investigated. The internal friction was measured using multifunction internal friction equipment and reversal torsion pendulum. The microstructure was observed using scanning electron microscopy. The phase transformation temperatures were determined using differential scanning calorimetry. The results indicated that the internal friction of Fe-19Mn alloy after solution treating was related to strain amplitude. The internal friction mechanism was believed to the movements of four damping sources ({epsilon}-martensite variant boundaries, stacking fault boundaries in {epsilon}-martensite and {gamma}-austenite, {gamma}/{epsilon} interfaces), which could be explained using the interactive movements of Shockley partial dislocations and point defects. At low strain amplitude (10{sup -5} range), the bowing out movements of Shockley partial dislocations are the main moving mode of generating internal friction. At high strain amplitude (10{sup -4} range), however, the breaking away movements of Shockley partial dislocations are the high internal friction mechanism of Fe-19Mn alloy.

  18. Tested Demonstrations.

    Science.gov (United States)

    Sands, Robert; And Others

    1982-01-01

    Procedures for two demonstrations are provided. The solubility of ammonia gas in water is demonstrated by introducing water into a closed can filled with the gas, collapsing the can. The second demonstration relates scale of standard reduction potentials to observed behavior of metals in reactions with hydrogen to produce hydrogen gas. (Author/JN)

  19. A novel SWIR detector with an ultra-high internal gain and negligible excess noise

    Science.gov (United States)

    Mohseni, H.; Memis, O. G.; Kong, S. C.; Katsnelson, A.; Wu, W.

    2007-10-01

    Short wave infrared (SWIR) imaging systems have several advantages due to the spectral content of the nightglow and better discrimination against camouflage. Achieving single photon detection sensitivity can significantly improve the image quality of these systems. However, the internal noise of the detector and readout circuits are significant barriers to achieve this goal. One can prove that the noise limitations of the readout can be alleviated, if the detector exhibits sufficiently high internal gain. Unfortunately, the existing detectors with internal gain have a very high noise as well. Here we present the recent results from our novel FOcalized Carrier aUgmented Sensor (FOCUS). It utilizes very high charge compression into a nano-injector, and subsequent carrier injection to achieve high quantum efficiency and high sensitivity at short infrared at room temperature. We obtain internal gain values exceeding several thousand at bias values of less than 1 volt. The current responsivity at 1.55 μm is more than 1500 A/W, and the noise equivalent power (NEP) is less that 0.5 x10 -15 W/Hz 1/2 at room temperature. These are significantly better than the performance of the existing room temperature devices with internal gain. Also, unlike avalanche-based photodiodes, the measured excess noise factor for our device is near unity, even at very high gain values. The stable gain of the device combined with the low operating voltage are unique advantages of this technology for high-performance SWIR imaging arrays.

  20. Spatiotemporal neurodynamics underlying internally and externally driven temporal prediction: a high spatial resolution ERP study.

    Science.gov (United States)

    Mento, Giovanni; Tarantino, Vincenza; Vallesi, Antonino; Bisiacchi, Patrizia Silvia

    2015-03-01

    Temporal prediction (TP) is a flexible and dynamic cognitive ability. Depending on the internal or external nature of information exploited to generate TP, distinct cognitive and brain mechanisms are engaged with the same final goal of reducing uncertainty about the future. In this study, we investigated the specific brain mechanisms involved in internally and externally driven TP. To this end, we employed an experimental paradigm purposely designed to elicit and compare externally and internally driven TP and a combined approach based on the application of a distributed source reconstruction modeling on a high spatial resolution electrophysiological data array. Specific spatiotemporal ERP signatures were identified, with significant modulation of contingent negative variation and frontal late sustained positivity in external and internal TP contexts, respectively. These different electrophysiological patterns were supported by the engagement of distinct neural networks, including a left sensorimotor and a prefrontal circuit for externally and internally driven TP, respectively.

  1. Investigation and Demonstration of High Speed Full-Optical Hybrid FSO/Fiber Communication System under Light Sand Storm Condition

    KAUST Repository

    Esmail, Maged Abdullah

    2016-12-19

    In contrast to traditional free space optical (FSO) systems, the new generation is aimed to be transparent to optical fiber where protocols, high signal bandwidths, and high data rates over fiber are all maintained. In this paper, we experimentally demonstrate a high speed outdoor full-optical FSO communication system over 100 m link. We first describe the design of our transmitter, which consists of a comb generator and a flexible multiformat transmitter. Our measurements are performed in arid desert area under a light dust storm. In this environment, we use a 12 subcarrier comb generator, each of which is modulated by a quadrature-amplitude modulation (QAM) signal. We achieved a 1.08 Tbps error free data rate with 3.6 b/s/Hz spectral efficiency. We place long optical fiber rolls in the transmitter side and the receiver side to mimic real FSO deployments. Furthermore, we investigated the effect of receiver misalignment in outdoor conditions and the effect of background noise. We find that full-optical FSO system is sensitive to the misalignment effect. However, the background noise has negligible effect. Finally, we find that solar heating of the transceiver causes collimator deviation, which requires using a cooling unit or auto tracking system.

  2. Demonstration of a strategy for product purification by high-gradient magnetic fishing: Recovery of superoxide dismutase from unconditioned whey

    DEFF Research Database (Denmark)

    Meyer, A.; Hansen, D.B.; Goncalves Gomes, Claudia Sofia

    2005-01-01

    A systematic approach for the design of a bioproduct recovery process employing magnetic supports and the technique of high-gradient magnetic fishing (HGMF) is described. The approach is illustrated for the separation of superoxide dismutase (SOD), an antioxidant protein present in low concentrat......A systematic approach for the design of a bioproduct recovery process employing magnetic supports and the technique of high-gradient magnetic fishing (HGMF) is described. The approach is illustrated for the separation of superoxide dismutase (SOD), an antioxidant protein present in low......: product adsorption, support washing, and product elution. Next, the capacity of a novel high-gradient magnetic separator (designed for biotechnological applications) for trapping and holding magnetic supports was determined. Finally, all of the above elements were assembled to deliver a HGMF process...... and solids; (iv) elution of the target protein; and (v) recovery of the eluted supports from the HGMF rig. Efficient recovery of SOD was demonstrated at similar to50-fold increased scale (cf. magnetic rack studies) in three separate HGMF experiments, and in the best of these (run 3) an SOD yield of >85...

  3. Demonstration of a strategy for product purification by high-gradient magnetic fishing: recovery of superoxide dismutase from unconditioned whey.

    Science.gov (United States)

    Meyer, Andrea; Hansen, Dennis B; Gomes, Cláudia S G; Hobley, Timothy J; Thomas, Owen R T; Franzreb, Matthias

    2005-01-01

    A systematic approach for the design of a bioproduct recovery process employing magnetic supports and the technique of high-gradient magnetic fishing (HGMF) is described. The approach is illustrated for the separation of superoxide dismutase (SOD), an antioxidant protein present in low concentrations (ca. 0.15-0.6 mg L(-1)) in whey. The first part of the process design consisted of ligand screening in which metal chelate supports charged with copper(II) ions were found to be the most suitable. The second stage involved systematic and sequential optimization of conditions for the following steps: product adsorption, support washing, and product elution. Next, the capacity of a novel high-gradient magnetic separator (designed for biotechnological applications) for trapping and holding magnetic supports was determined. Finally, all of the above elements were assembled to deliver a HGMF process for the isolation of SOD from crude sweet whey, which consisted of (i) binding SOD using Cu2+ -charged magnetic metal chelator particles in a batch reactor with whey; (ii) recovery of the "SOD-loaded" supports by high-gradient magnetic separation (HGMS); (iii) washing out loosely bound and entrained proteins and solids; (iv) elution of the target protein; and (v) recovery of the eluted supports from the HGMF rig. Efficient recovery of SOD was demonstrated at approximately 50-fold increased scale (cf magnetic rack studies) in three separate HGMF experiments, and in the best of these (run 3) an SOD yield of >85% and purification factor of approximately 21 were obtained.

  4. Analysis on LID for highly urbanized areas' waterlogging control: demonstrated on the example of Caohejing in Shanghai.

    Science.gov (United States)

    Liao, Z L; He, Y; Huang, F; Wang, S; Li, H Z

    2013-01-01

    Although a commonly applied measure across the United States and Europe for alleviating the negative impacts of urbanization on the hydrological cycle, low impact development (LID) has not been widely used in highly urbanized areas, especially in rapidly urbanizing cities in developing countries like China. In this paper, given five LID practices including Bio-Retention, Infiltration Trench, Porous Pavement, Rain Barrels, and Green Swale, an analysis on LID for highly urbanized areas' waterlogging control is demonstrated using the example of Caohejing in Shanghai, China. Design storm events and storm water management models are employed to simulate the total waterlogging volume reduction, peak flow rate reduction and runoff coefficient reduction of different scenarios. Cost-effectiveness is calculated for the five practices. The aftermath shows that LID practices can have significant effects on storm water management in a highly urbanized area, and the comparative results reveal that Rain Barrels and Infiltration Trench are the two most suitable cost-effective measures for the study area.

  5. Analysis of Corrosion Residues Collected from the Aluminum Basket Rails of the High-Burnup Demonstration Cask.

    Energy Technology Data Exchange (ETDEWEB)

    Bryan, Charles R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-03-01

    On September, 2015, an inspection was performed on the TN-32B cask that will be used for the high-burnup demonstration project. During the survey, wooden cribbing that had been placed within the cask eleven years earlier to prevent shifting of the basket during transport was removed, revealing two areas of residue on the aluminum basket rails, where they had contacted the cribbing. The residue appeared to be a corrosion product, and concerns were raised that similar attack could exist at more difficult-to-inspect locations in the canister. Accordingly, when the canister was reopened, samples of the residue were collected for analysis. This report presents the results of that assessment, which determined that the corrosion was due to the presence of the cribbing. The corrosion was associated with fungal material, and fungal activity likely contributed to an aggressive chemical environment. Once the cask has been cleaned, there will be no risk of further corrosion.

  6. Self-assembled core-polyethylene glycol-lipid shell nanoparticles demonstrate high stability in shear flow.

    Science.gov (United States)

    Shen, Zhiqiang; Ye, Huilin; Kröger, Martin; Li, Ying

    2017-05-24

    A core-polyethylene glycol-lipid shell (CPLS) nanoparticle consists of an inorganic core coated with polyethylene glycol (PEG) polymers, surrounded by a lipid bilayer shell. It can be self-assembled from a PEGylated core with surface-tethered PEG chains, where all the distal ends are covalently bonded to lipid molecules. Upon adding free lipids, a complete lipid bilayer shell can be formed on the surface driven by the hydrophobic nature of lipid tails, leading to the formation of a CPLS nanoparticle. The stability of CPLS nanoparticles in shear flow has been systematically studied through large scale dissipative particle dynamics simulations. CPLS nanoparticles demonstrate higher stability and less deformation in shear flow, compared with lipid vesicles. Burst leakage of drug molecules inside lipid vesicles and CPLS NPs can be induced by the large pores at their tips. These pores are initiated by the maximum stress in the waist region. It further grows along with the tank-treading motion of vesicles or CPLS NPs in shear flow. However, due to the constraints applied by PEG polymers, CPLS NPs are less deformed than vesicles with comparable size under the same flow conditions. Thus, the less deformed CPLS NPs express a smaller maximum stress at waists, demonstrating higher stability. Pore formation at waists, evolving into large pores on vesicles, leads to the burst leakage of drug molecules and complete rupture of vesicles. In contrast, although similar drug leakage in CPLS nanoparticles can occur at high shear rates, pores initiated at moderate shear rates tend to be short-lived and close due to the constraints mediated by PEG polymers. This kind of 'self-healing' capability can be observed over a wide range of shear rates for CPLS nanoparticles. Our results suggest self-assembled CPLS nanoparticles to exhibit high stability during blood circulation without rapid drug leakage. These features make CPLS nanoparticles candidates for a promising drug delivery platform.

  7. CHINA-FIRST SUPERPOWER IN INTERNATIONAL TRADE WITH HIGH-TECH PRODUCTS

    OpenAIRE

    Ecaterina Stanculescu

    2013-01-01

    The article tries to make a picture of the last five years of the Chinese international trade with high-technology (HT) products. China is after 2006 the biggest commercial force on the international market for HT products, exceeding EU and USA. Its international trade grew rapidely in the field of exports and more slowly for imports, the ballance sheet going from a negative sold to a positive one from 2007 to 2011 (the analized period of time). China disposes of a great potential both for ex...

  8. STATISTICAL PROPERTIES OF HIGH-FREQUENCY INTERNAL WAVES IN QINGDAO OFFSHORE AREA OF THE YELLOW SEA

    Institute of Scientific and Technical Information of China (English)

    王涛; 高天赋

    2002-01-01

    Densely-sampled thermistor chain data obtained from a shallow-water acoustics experiment in the Yellow Sea off the coast of Qingdao were analyzed to examine the statistical properties of the 6 to 520 cpd frequency band internal waves observed. The negative skewness coefficients and the greater-than-3 kurtosis coefficients indicated non-Gaussianity of the internal waves. The probability distributions were negatively skewed and abnormally high peaks. Nonlinear properties, as exemplified by the asymmetric waveshapes of the internal waves in the offshore area are described quantitatively.

  9. The appearances of oesophageal carcinoma demonstrated on high-resolution, T2-weighted MRI, with histopathological correlation

    Energy Technology Data Exchange (ETDEWEB)

    Riddell, A.M. [Royal Marsden Hospital NHS Foundation Trust, Department of Radiology, London (United Kingdom); Royal Marsden Hospital NHS Foundation Trust, GI Oncology Imaging Research Fellow, Department of Diagnostic Imaging, London (United Kingdom); Allum, W.H.; Thompson, J.N. [Royal Marsden Hospital NHS Foundation Trust, Department of Surgery, London (United Kingdom); Wotherspoon, A.C. [Royal Marsden Hospital NHS Foundation Trust, Department of Histopathology, London (United Kingdom); Richardson, C.; Brown, G. [Royal Marsden Hospital NHS Foundation Trust, Department of Radiology, London (United Kingdom)

    2007-02-15

    This paper describes the spectrum of imaging features of oesophageal adenocarcinoma seen using high-resolution T2-weighted (T2W) magnetic resonance imaging (MRI). Thirty-nine patients with biopsy-proven oesophageal adenocarcinoma were scanned using an external surface coil. A sagittal T2W sequence was used to localise the tumour and to plan axial images perpendicular to the tumour. Fast spin-echo (FSE) T2W axial sequence parameters were: TR/TE, 3,300-5,000 ms/120-80 ms; field of view (FOV) 225 mm, matrix 176 x 512(reconstructed) mm to 256 x 224 mm, giving an in-plane resolution of between 1.28 x 0.44 mm and 0.88 x 1.00 mm, with 3-mm slice thickness. Thirty-three patients underwent resection and the MR images were compared with the histological whole-mount sections. There were four T1, 12 T2, and 17 T3 tumours. The T2W high-resolution MRI sequences produced detailed images of the oesophageal wall and surrounding structures. Analysis of the imaging appearances for different tumour T stages enabled the development of imaging criteria for local staging of oesophageal cancer using high-resolution MRI. Our study illustrates the spectrum of appearances of oesophageal cancer on T2W high-resolution MRI, and using the criteria established in this study, demonstrates the potential of this technique as an alternative non-invasive method for local staging for oesophageal cancer. (orig.)

  10. The 9th Beijing Chitec,Platform for International High & New Technology Communication

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

      The 9th China Beijing International High-tech Expo The 9th Chitec, Co-organized by The Ministry of Science and Technology, The Ministry of Commerce, The Ministry of Education, The Ministry of Information Industry, China Council for the Promotion of International Trade, State Intellectual Property office and Beijing Government, was held in Beijing from May 22 to May 27.……

  11. FIELD DEMONSTRATION OF INNOVATIVE CONDITION ASSESSMENT TECHNOLOGIES FOR WATER MAINS: ACOUSTIC PIPE WALL ASSESSMENT, INTERNAL INSPECTION, AND EXTERNAL INSPECTIONVOLUME 1: TECHNICAL REPORT AND VOLUME 2: APPENDICES

    Science.gov (United States)

    Nine pipe wall integrity assessment technologies were demonstrated on a 76-year-old, 2,057-ft-long portion of a cement-lined, 24-in. cast iron water main in Louisville, KY. This activity was part of a series of field demonstrations of innovative leak detection/location and condi...

  12. Mathematical analysis for internal filtration of convection-enhanced high-flux hemodialyzer.

    Science.gov (United States)

    Lee, Jung Chan; Lee, Kyungsoo; Kim, Hee Chan

    2012-10-01

    Structural modifications using a conventional hemodialyzer improved the internal filtration and clearance of middle molecular weight wastes by enhanced convection effect. In this study, we employed a mathematical model describing the internal filtration rate as well as the hemodynamic and hematologic parameters in highflux dialyzer to interpret the previous reported experimental results. Conventional high-flux hemodialysis and convection-enhanced high-flux hemodialysis were configured in the mathematical forms and integrated into the iterative numerical method to predict the internal filtration phenomena inside the dialyzers during dialysis. The distributions of blood pressure, dialysate pressure, oncotic pressure, blood flow rates, dialysate flow rates, local ultrafiltration, hematocrit, protein concentration and blood viscosity along the axial length of dialyzer were calculated in order to estimate the internal filtration volume. The results show that the filtration volumes by internal filtration is two times higher in a convection-enhanced high-flux hemodialyzer than in a conventional high-flux hemodialzer and explains the experimental result of improved clearance of middle molecular size waste in convection-enhanced high-flux hemodialyzer.

  13. ARC: A compact, high-field, fusion nuclear science facility and demonstration power plant with demountable magnets

    Energy Technology Data Exchange (ETDEWEB)

    Sorbom, B.N., E-mail: bsorbom@mit.edu; Ball, J.; Palmer, T.R.; Mangiarotti, F.J.; Sierchio, J.M.; Bonoli, P.; Kasten, C.; Sutherland, D.A.; Barnard, H.S.; Haakonsen, C.B.; Goh, J.; Sung, C.; Whyte, D.G.

    2015-11-15

    Highlights: • ARC reactor designed to have 500 MW fusion power at 3.3 m major radius. • Compact, simplified design allowed by high magnetic fields and jointed magnets. • ARC has innovative plasma physics solutions such as inboardside RF launch. • High temperature superconductors allow high magnetic fields and jointed magnets. • Liquid immersion blanket and jointed magnets greatly simplify tokamak reactor design. - Abstract: The affordable, robust, compact (ARC) reactor is the product of a conceptual design study aimed at reducing the size, cost, and complexity of a combined fusion nuclear science facility (FNSF) and demonstration fusion Pilot power plant. ARC is a ∼200–250 MWe tokamak reactor with a major radius of 3.3 m, a minor radius of 1.1 m, and an on-axis magnetic field of 9.2 T. ARC has rare earth barium copper oxide (REBCO) superconducting toroidal field coils, which have joints to enable disassembly. This allows the vacuum vessel to be replaced quickly, mitigating first wall survivability concerns, and permits a single device to test many vacuum vessel designs and divertor materials. The design point has a plasma fusion gain of Q{sub p} ≈ 13.6, yet is fully non-inductive, with a modest bootstrap fraction of only ∼63%. Thus ARC offers a high power gain with relatively large external control of the current profile. This highly attractive combination is enabled by the ∼23 T peak field on coil achievable with newly available REBCO superconductor technology. External current drive is provided by two innovative inboard RF launchers using 25 MW of lower hybrid and 13.6 MW of ion cyclotron fast wave power. The resulting efficient current drive provides a robust, steady state core plasma far from disruptive limits. ARC uses an all-liquid blanket, consisting of low pressure, slowly flowing fluorine lithium beryllium (FLiBe) molten salt. The liquid blanket is low-risk technology and provides effective neutron moderation and shielding, excellent

  14. Energy audit of three energy-conserving devices in a steel industry demonstration program. Task III. GTE high temperature recuperation

    Energy Technology Data Exchange (ETDEWEB)

    Holden, F.C.; Hoffman, A.O.; Lownie, H.W.

    1983-06-01

    The Office of Industrial Programs of the Department of Energy has undertaken a program to demonstrate to industry the benefits of installing various energy-conserving devices and equipment. This report presents results on one of those systems, a high-temperature ceramic recuperator designed and manufactured by Sylvania Chemical and Metallurgical Division, GTE Products Corporation of Towanda, Pennsylvania. The ceramic cross-flow recuperator unit recovers waste heat from the hot combustion gases and delivers preheated air to high-temperature burners of various manufacture. Of the 38 host site installations included in the program, sufficient operating data were obtained from 28 sites to evaluate the benefits in terms of energy and economic savings that can be achieved. Performance and cost data are analyzed and presented for those 28 installations, which covered a variety of applications, sizes, and industry types. Except for 5 sites where unusual operating or data-collection problems were encountered, the improvements in performance of the recuperated furnaces equalled or exceeded estimates; the average of the total fuel savings for these 23 sites was 44.0 percent, some portion of which resulted from furnace improvements other than recuperation. Payback times were calculated for both total costs and for recuperator-related costs, using a cumulative annual after-tax cash flow method which includes tax investment credits, estimates of general and fuel-price inflation, and maintenance costs.

  15. ARC: A compact, high-field, fusion nuclear science facility and demonstration power plant with demountable magnets

    CERN Document Server

    Sorbom, B N; Palmer, T R; Mangiarotti, F J; Sierchio, J M; Bonoli, P; Kasten, C; Sutherland, D A; Barnard, H S; Haakonsen, C B; Goh, J; Sung, C; Whyte, D G

    2014-01-01

    The affordable, robust, compact (ARC) reactor conceptual design study aims to reduce the size, cost, and complexity of a combined fusion nuclear science facility (FNSF) and demonstration fusion Pilot power plant. ARC is a 270 MWe tokamak reactor with a major radius of 3.3 m, a minor radius of 1.1 m, and an on-axis magnetic field of 9.2 T. ARC has rare earth barium copper oxide (REBCO) superconducting toroidal field coils, which have joints to enable disassembly. This allows the vacuum vessel to be replaced quickly, mitigating first wall survivability concerns, and permits a single device to test many vacuum vessel designs and divertor materials. The design point has a plasma fusion gain of Q_p~13.6, yet is fully non-inductive, with a modest bootstrap fraction of only ~63%. Thus ARC offers a high power gain with relatively large external control of the current profile. This highly attractive combination is enabled by the ~23 T peak field on coil with newly available REBCO superconductor technology. External cu...

  16. Toward a Serial International Approach of the High Mountain Observatories, within important Dark Sky Value

    Science.gov (United States)

    Cotte, Michel

    2015-08-01

    Practical approach of Dark Sky places as possible WH sites leads some of us to underline the exceptional role of high mountain observatories as “Windows to the Universe” for the Human being. Till today, such places keep very important dark sky properties and consequently important astronomical functions.We have to take count that quality of the sky at a given place and dark sky conservation policy is something very important, but not enough by itself to justify inscription on the WH List. It must be related to important cultural or/and natural value. That means presence of significant heritage features in the field of astronomy and science for listing as WH cultural property, or with other natural attributes of exceptional significance to be listed as WH natural property. Case of both natural and cultural WH high value place is also possible as “mixt WH site”.The Dark Sky place must also meet to a sufficient integrity/authenticity degree for the today tangible heritage of astronomy and to a very significant contribution to the international history of science and astronomy as intangible attribute of the place. That point must be demonstrated by a serious comparative analysis with similar places in the world and in the region. In case of serial nomination as examined there, each individual site must contribute significantly to the Outstanding Universal Value of the global series.First, we intend to give a short account of the today trend for a possible serial nomination of the most significant high mountain observatory keeping important heritage of their major periods for the sky observation (Western Europe, Chile, North America, etc.).Second, communication will present a case study with Pic du Midi in French Pyrenees, coming from the early origin of mountain scientific stations and observatories (end of 19th C) in Europe, with a long, continuous and important astronomical and scientific history till today with active programs of sky and atmosphere

  17. High-Level waste glass dissolution in simulated internal waste package environments

    Energy Technology Data Exchange (ETDEWEB)

    Jain, V.; Pan, Y.M. [Center for Nuclear Waste Regulatory Analyses, Southwest Research Institute, San Antonio (United States)

    2000-07-01

    The rate of radionuclide release as a result of leaching of high-level radioactive waste (HLW) glass is important to the performance of engineered barriers. The modified product consistency test (PCT), with regular leachant exchanges, was used to determine the leaching rate of simulated HLW glasses (West Valley Demonstration Project Reference 6 and Defense Waste Processing Facility Blend 1) in aqueous solutions of FeCl{sub 2} and FeCl{sub 3} at 90 EC. These conditions were selected to simulate an internal waste package (WP) environment containing steel corrosion products and oxidized by radiolysis. Substantially higher initial B and alkali release rates, approximately a factor of 50 to 70 times greater than those in deionized water, were measured in 0.25 M FeCl{sub 3} solutions. The initial leaching rate for B and alkali was found to be pH-dependent and decreased as the leachate pH was increased. While the leach rate for Si did not show any significant change in the pH range studied, the leach rate for Al showed a minimum. The minimum in the leach rate of Al occurred at different pH values. The study indicates that elements in the glass matrix are released incongruently. (authors)

  18. Tested Demonstrations.

    Science.gov (United States)

    Gilbert, George L., Ed.

    1983-01-01

    Free radical chlorination of methane is used in organic chemistry to introduce free radical/chain reactions. In spite of its common occurrence, demonstrations of the reaction are uncommon. Therefore, such a demonstration is provided, including background information, preparation of reactants/reaction vessel, introduction of reactants, irradiation,…

  19. Tested Demonstrations.

    Science.gov (United States)

    Gilbert, George L., Ed.

    1983-01-01

    Discusses a supplement to the "water to rose" demonstration in which a pink color is produced. Also discusses blood buffer demonstrations, including hydrolysis of sodium bicarbonate, simulated blood buffer, metabolic acidosis, natural compensation of metabolic acidosis, metabolic alkalosis, acidosis treatment, and alkalosis treatment. Procedures…

  20. Complete Demonstration.

    Science.gov (United States)

    Yelon, Stephen; Maddocks, Peg

    1986-01-01

    Describes four-step approach to educational demonstration: tell learners they will have to perform; what they should notice; describe each step before doing it; and require memorization of steps. Examples illustrate use of this process to demonstrate a general mental strategy, and industrial design, supervisory, fine motor, and specific…

  1. Tested Demonstrations.

    Science.gov (United States)

    Gilbert, George L., Ed.

    1987-01-01

    Describes two laboratory demonstrations in chemistry. One uses dry ice, freon, and freezer bags to demonstrate volume changes, vapor-liquid equilibrium, a simulation of a rain forest, and vaporization. The other uses the clock reaction technique to illustrate fast reactions and kinetic problems in releasing carbon dioxide during respiration. (TW)

  2. Tested Demonstrations.

    Science.gov (United States)

    Gilbert, George L., Ed.

    1986-01-01

    Outlines a simple, inexpensive way of demonstrating electroplating using the reaction between nickel ions and copper metal. Explains how to conduct a demonstration of the electrolysis of water by using a colored Na2SO4 solution as the electrolyte so that students can observe the pH changes. (TW)

  3. Tested Demonstrations.

    Science.gov (United States)

    Gilbert, George L.

    1990-01-01

    Included are three demonstrations that include the phase change of ice when under pressure, viscoelasticity and colloid systems, and flame tests for metal ions. The materials, procedures, probable results, and applications to real life situations are included. (KR)

  4. Tested Demonstrations.

    Science.gov (United States)

    Gilbert, George L., Ed.

    1980-01-01

    Presented is a Corridor Demonstration which can be set up in readily accessible areas such as hallways or lobbies. Equipment is listed for a display of three cells (solar cells, fuel cells, and storage cells) which develop electrical energy. (CS)

  5. Tested Demonstrations.

    Science.gov (United States)

    Gilbert, George L., Ed.

    1987-01-01

    Presents three demonstrations suitable for undergraduate chemistry classes. Focuses on experiments with calcium carbide, the induction by iron of the oxidation of iodide by dichromate, and the classical iodine clock reaction. (ML)

  6. High-efficiency one-sun photovoltaic module demonstration using solar-grade CZ silicon. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Gee, J.M.

    1996-10-01

    This work was performed jointly by Sandia National Laboratories (Albuquerque, NM) and Siemens Solar Industries (Camarillo, CA) under a Cooperative Research and Development Agreement (CRADA 1248). The work covers the period May 1994 to March 1996. The purpose of the work was to explore the performance potential of commercial, photovoltaic-grade Czochralski (Cz) silicon, and to demonstrate this potential through fabrication of high-efficiency cells and a module. Fabrication of the module was omitted in order to pursue further development of advanced device structures. The work included investigation of response of the material to various fabrication processes, development of advanced cell structures using the commercial material, and investigation of the stability of Cz silicon solar cells. Some important achievements of this work include the following: post-diffusion oxidations were found to be a possible source of material contamination; bulk lifetimes around 75 pts were achieved; efficiencies of 17.6% and 15.7% were achieved for large-area cells using advanced cell structures (back-surface fields and emitter wrap-through); and preliminary investigations into photodegradation in Cz silicon solar cells found that oxygen thermal donors might be involved. Efficiencies around 20% should be possible with commercial, photovoltaic-grade silicon using properly optimized processes and device structures.

  7. High-resolution dynamic angiography using flat-panel volume CT: feasibility demonstration for neuro and lower limb vascular applications

    Energy Technology Data Exchange (ETDEWEB)

    Mehndiratta, Amit [Massachusetts General Hospital, Department of Radiology, Harvard Medical School, Boston, MA (United States); University of Oxford, Institute of Biomedical Engineering and Keble College, Oxford (United Kingdom); Indian Institute of Technology Delhi and All India Institute of Medical Science, Centre for Biomedical Engineering, New Delhi (India); Rabinov, James D. [Massachusetts General Hospital, Interventional Neuroradiology, Harvard Medical School, Boston, MA (United States); Grasruck, Michael [Siemens Medical Solutions, Forchheim (Germany); Liao, Eric C. [Massachusetts General Hospital, Department of Plastic and Reconstructive Surgery and Center for Regenerative Medicine, Harvard Medical School, Boston, MA (United States); Crandell, David [Spaulding Rehabilitation Hospital, Department of Physical Medicine and Rehabilitation, Harvard Medical School, Charlestown, MA (United States); Gupta, Rajiv [Massachusetts General Hospital, Department of Radiology, Harvard Medical School, Boston, MA (United States)

    2015-07-15

    This paper evaluates a prototype flat-panel volume CT (fpVCT) for dynamic in vivo imaging in a variety of neurovascular and lower limb applications. Dynamic CTA was performed on 12 patients (neuro = 8, lower limb = 4) using an fpVCT with 120 kVp, 50 mA, rotation time varying from 8 to 19 s, and field of view of 25 x 25 x 18 cm{sup 3}. Four-dimensional data sets (i.e. 3D images over time) were reconstructed and reviewed. Dynamic CTA demonstrated sufficient spatio-temporal resolution to elucidate first-pass and recirculation dynamics of contrast bolus through neurovasclar pathologies and phasic blood flow though lower-limb vasculature and grafts. The high spatial resolution of fpVCT resulted in reduced partial volume and metal beam-hardening artefacts. This facilitated assessment of vascular lumen in the presence of calcified plaque and evaluation of fractures, especially in the presence of fixation hardware. Evaluation of arteriovenous malformation using dynamic fpVCT angiography was of limited utility. Dynamic CTA using fpVCT can visualize time-varying phenomena in neuro and lower limb vascular applications and has sufficient diagnostic imaging quality to evaluate a number of pathologies affecting these regions. (orig.)

  8. Demonstration of SCR technology for the control of NOx emissions from high-sulfur coal-fired utility boilers

    Energy Technology Data Exchange (ETDEWEB)

    Hinton, W.S. [W.S. Hinton and Associates, Cantonment, FL (United States); Maxwell, J.D.; Healy, E.C.; Hardman, R.R. [Southern Company Services, Inc., Birmingham, AL (United States); Baldwin, A.L. [Dept. of Energy, Pittsburgh, PA (United States)

    1997-12-31

    This paper describes the completed Innovative Clean Coal Technology project which demonstrated SCR technology for reduction of flue gas NO{sub x} emissions from a utility boiler burning US high-sulfur coal. The project was sponsored by the US Department of Energy, managed and co-funded by Southern Company Services, Inc. on behalf of the Southern Company, and also co-funded by the Electric Power Research Institute and Ontario Hydro. The project was located at Gulf Power Company`s Plant Crist Unit 5 (a 75 MW tangentially-fired boiler burning US coals that had a sulfur content ranging from 2.5--2.9%), near Pensacola, Florida. The test program was conducted for approximately two years to evaluate catalyst deactivation and other SCR operational effects. The SCR test facility had nine reactors: three 2.5 MW (5,000 scfm), and operated on low-dust flue gas. The reactors operated in parallel with commercially available SCR catalysts obtained from suppliers throughout the world. Long-term performance testing began in July 1993 and was completed in July 1995. A brief test facility description and the results of the project are presented in this paper.

  9. High-efficiency one-sun photovoltaic module demonstration using solar-grade CZ silicon. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Gee, J.M.

    1996-10-01

    This work was performed jointly by Sandia National Laboratories (Albuquerque, NM) and Siemens Solar Industries (Camarillo, CA) under a Cooperative Research and Development Agreement (CRADA 1248). The work covers the period May 1994 to March 1996. The purpose of the work was to explore the performance potential of commercial, photovoltaic-grade Czochralski (Cz) silicon, and to demonstrate this potential through fabrication of high-efficiency cells and a module. Fabrication of the module was omitted in order to pursue further development of advanced device structures. The work included investigation of response of the material to various fabrication processes, development of advanced cell structures using the commercial material, and investigation of the stability of Cz silicon solar cells. Some important achievements of this work include the following: post-diffusion oxidations were found to be a possible source of material contamination; bulk lifetimes around 75 pts were achieved; efficiencies of 17.6% and 15.7% were achieved for large-area cells using advanced cell structures (back-surface fields and emitter wrap-through); and preliminary investigations into photodegradation in Cz silicon solar cells found that oxygen thermal donors might be involved. Efficiencies around 20% should be possible with commercial, photovoltaic-grade silicon using properly optimized processes and device structures.

  10. News Outreach: Polish physics club reaches out with practical demonstrations Networking: Online workspace helps teachers to share ideas Mauritius: Telescope inspires science specification Fusion: EFDA sparks resources Olympiad: British team enjoys success at the International Physics Olympiad 2009 Nanoscience: 'Quietest' building in the world opens in Bristol, UK Conference: University of Leicester hosts the GIREP EPEC 2009 international conference

    Science.gov (United States)

    2009-11-01

    Outreach: Polish physics club reaches out with practical demonstrations Networking: Online workspace helps teachers to share ideas Mauritius: Telescope inspires science specification Fusion: EFDA sparks resources Olympiad: British team enjoys success at the International Physics Olympiad 2009 Nanoscience: 'Quietest' building in the world opens in Bristol, UK Conference: University of Leicester hosts the GIREP EPEC 2009 international conference

  11. Multilocus sequence typing and rtxA toxin gene sequencing analysis of Kingella kingae isolates demonstrates genetic diversity and international clones.

    Directory of Open Access Journals (Sweden)

    Romain Basmaci

    Full Text Available BACKGROUND: Kingella kingae, a normal component of the upper respiratory flora, is being increasingly recognized as an important invasive pathogen in young children. Genetic diversity of this species has not been studied. METHODS: We analyzed 103 strains from different countries and clinical origins by a new multilocus sequence-typing (MLST schema. Putative virulence gene rtxA, encoding an RTX toxin, was also sequenced, and experimental virulence of representative strains was assessed in a juvenile-rat model. RESULTS: Thirty-six sequence-types (ST and nine ST-complexes (STc were detected. The main STc 6, 14 and 23 comprised 23, 17 and 20 strains respectively, and were internationally distributed. rtxA sequencing results were mostly congruent with MLST, and showed horizontal transfer events. Of interest, all members of the distantly related ST-6 (n = 22 and ST-5 (n = 4 harboured a 33 bp duplication or triplication in their rtxA sequence, suggesting that this genetic trait arose through selective advantage. The animal model revealed significant differences in virulence among strains of the species. CONCLUSION: MLST analysis reveals international spread of ST-complexes and will help to decipher acquisition and evolution of virulence traits and diversity of pathogenicity among K. kingae strains, for which an experimental animal model is now available.

  12. CHRONICLE: International forum on advanced high-power lasers and applications (AHPLA '99)

    Science.gov (United States)

    Afanas'ev, Yurii V.; Zavestovskaya, I. N.; Zvorykin, V. D.; Ionin, Andrei A.; Senatsky, Yu V.; Starodub, Aleksandr N.

    2000-05-01

    A review of reports made on the International Forum on Advanced High-Power Lasers and Applications, which was held at the beginning of November 1999 in Osaka (Japan), is presented. Five conferences were held during the forum on High-Power Laser Ablation, High-Power Lasers in Energy Engineering, High-Power Lasers in Civil Engineering and Architecture, High-Power Lasers in Manufacturing, and Advanced High-Power Lasers. The following trends in the field of high-power lasers and their applications were presented: laser fusion, laser applications in space, laser-triggered lightning, laser ablation of materials by short and ultrashort pulses, application of high-power lasers in manufacturing, application of high-power lasers in mining, laser decommissioning and decontamination of nuclear reactors, high-power solid-state and gas lasers, x-ray and free-electron lasers. One can find complete information on the forum in SPIE, vols. 3885-3889.

  13. Observations of High-frequency Internal Wave Energy Offshore of Point Loma, California

    Science.gov (United States)

    Rhee, K.; Crosby, S. C.; Fiedler, J. W.

    2016-12-01

    As coastally directed internal wave energy shoals in shallow water, the resulting bores can transport cold, dense, nutrient-rich waters shoreward, influencing local fauna and ultimately dissipating tidal energy into heat. Understanding the mechanisms, propagation, and resultant transport is crucial for determining the physical-biological interactions along our coasts. We observed significant internal wave energy offshore of Point Loma, San Diego using a thermistor chain moored in 22m depth. Temperature observations spaced 1.5m apart from 0 to 18m were sampled at 2Hz and recorded for a period of ten days during July 2016. Temperature, salinity, oxygen, and nutrient profiles were obtained at 3 stations further offshore during deployment and recovery cruises. At the time of mooring deployment, thermocline depth was 10 to 20m. During recovery we observed a significant decrease of thermocline depth, which was likely caused by surface mixing during a strong wind event. During the 10-day deployment we observed many high frequency (5 to 10 minute periods) internal waves events. In addition, we noticed rapid temperature changes (4oC in less than a minute) suggestive of internal bores; however, other events appeared to be linear, possibly indicating unbroken internal waves. Here, we examine the critical slope for linear mode-1 propagation, the correlation of these events with tidal ebb and flow, and infer how a deeper mixed layer effects internal wave propagation.

  14. Tested Demonstrations.

    Science.gov (United States)

    Gilbert, George L., Ed.

    1987-01-01

    Describes two demonstrations to illustrate characteristics of substances. Outlines a method to detect the changes in pH levels during the electrolysis of water. Uses water pistols, one filled with methane gas and the other filled with water, to illustrate the differences in these two substances. (TW)

  15. Demonstrating the Uneven Importance of Fine-Scale Forest Structure on Snow Distributions using High Resolution Modeling

    Science.gov (United States)

    Broxton, P. D.; Harpold, A. A.; van Leeuwen, W.; Biederman, J. A.

    2016-12-01

    Quantifying the amount of snow in forested mountainous environments, as well as how it may change due to warming and forest disturbance, is critical given its importance for water supply and ecosystem health. Forest canopies affect snow accumulation and ablation in ways that are difficult to observe and model. Furthermore, fine-scale forest structure can accentuate or diminish the effects of forest-snow interactions. Despite decades of research demonstrating the importance of fine-scale forest structure (e.g. canopy edges and gaps) on snow, we still lack a comprehensive understanding of where and when forest structure has the largest impact on snowpack mass and energy budgets. Here, we use a hyper-resolution (1 meter spatial resolution) mass and energy balance snow model called the Snow Physics and Laser Mapping (SnowPALM) model along with LIDAR-derived forest structure to determine where spatial variability of fine-scale forest structure has the largest influence on large scale mass and energy budgets. SnowPALM was set up and calibrated at sites representing diverse climates in New Mexico, Arizona, and California. Then, we compared simulations at different model resolutions (i.e. 1, 10, and 100 m) to elucidate the effects of including versus not including information about fine scale canopy structure. These experiments were repeated for different prescribed topographies (i.e. flat, 30% slope north, and south-facing) at each site. Higher resolution simulations had more snow at lower canopy cover, with the opposite being true at high canopy cover. Furthermore, there is considerable scatter, indicating that different canopy arrangements can lead to different amounts of snow, even when the overall canopy coverage is the same. This modeling is contributing to the development of a high resolution machine learning algorithm called the Snow Water Artificial Network (SWANN) model to generate predictions of snow distributions over much larger domains, which has implications

  16. Filial Piety and Academic Motivation: High-Achieving Students in an International School in South Korea

    Science.gov (United States)

    Tam, Jonathan

    2016-01-01

    This study uses self-determination theory to explore the mechanisms of filial piety in the academic motivation of eight high-achieving secondary school seniors at an international school in South Korea, resulting in several findings. First, the students attributed their parents' values and expectations as a major source of the students'…

  17. 76 FR 4575 - Safety Zone; Repair of High Voltage Transmission Lines to Logan International Airport, Saugus...

    Science.gov (United States)

    2011-01-26

    ... to Logan International Airport, Saugus River, Saugus, MA AGENCY: Coast Guard, DHS. ACTION: Notice of... of high voltage transmission lines to Logan Airport. This safety zone is required to provide for the... feed Logan Airport. The safety zone will be enforced immediately before, during, and after the start...

  18. High internal phase emulsion gels (HIPE-gels) created through assembly of natural oil bodies

    NARCIS (Netherlands)

    Nikiforidis, C.V.; Scholten, E.

    2015-01-01

    A natural emulsion was used to create a high internal phase emulsion (HIPE) gel with elastic properties, indicated by shear elastic moduli between 102 and 105 Pa. The elasticity of the gel network was provided from a 2D-gel network of proteins which were naturally adsorbed at the interface of an oil

  19. Engineering high refractive index sensitivity through the internal and external composition of bimetallic nanocrystals.

    Science.gov (United States)

    Smith, Alison F; Harvey, Samantha M; Skrabalak, Sara E; Weiner, Rebecca G

    2016-10-14

    High refractive index sensitivity (RIS) of branched Au-Pd nanocrystals (NCs) is engineered through lowering the dielectric dispersion at the NC resonant wavelength with internal or external atomic % Pd. To our knowledge, these NCs display the highest ensemble RIS measurement for colloids with LSPR maximum band positions ≤900 nm, and these results are corroborated with FDTD computations.

  20. Celebrating the International Year of Crystallography with a Wisconsin High School Crystal Growing Competition

    Science.gov (United States)

    Guzei, Ilia A.

    2014-01-01

    In honor of the 2014 International Year of Crystallography, the first Wisconsin Crystal Growing Competition was successfully organized and conducted. High school students from 26 schools across the state competed for prizes by growing large crystals of CuSO[subscript4]·5(H[subscript2]O). This paper describes how the event was planned and carried…

  1. Solid rocket booster internal flow analysis by highly accurate adaptive computational methods

    Science.gov (United States)

    Huang, C. Y.; Tworzydlo, W.; Oden, J. T.; Bass, J. M.; Cullen, C.; Vadaketh, S.

    1991-01-01

    The primary objective of this project was to develop an adaptive finite element flow solver for simulating internal flows in the solid rocket booster. Described here is a unique flow simulator code for analyzing highly complex flow phenomena in the solid rocket booster. New methodologies and features incorporated into this analysis tool are described.

  2. High Retention of Minority and International Faculty through a Formal Mentoring Program

    Science.gov (United States)

    Phillips, Susan L.; Dennison, Susan T.; Davenport, Mark A.

    2016-01-01

    In these economic times, retention of new faculty, particularly minority and international faculty, is a high priority. In this study, retention of new faculty from 2006 to 2013 was compared for participants and nonparticipants in a formal mentoring program. Retention was 92% for participating faculty and 58% for nonparticipating new faculty. For…

  3. Jump Start: International High School Students From Other Countries Earning Early U.S. College Credits

    Science.gov (United States)

    Hu, Jiayi; Hagedorn, Linda Serra

    2015-01-01

    This study analyzes data from one of the larger credit-based college transition programs for international students, the U.S. Bound College Credit Program or USBC2 Program (a pseudonym), mainly offered to high school students around the globe who are planning on attending American colleges or universities. Upon successful program completion, these…

  4. Celebrating the International Year of Crystallography with a Wisconsin High School Crystal Growing Competition

    Science.gov (United States)

    Guzei, Ilia A.

    2014-01-01

    In honor of the 2014 International Year of Crystallography, the first Wisconsin Crystal Growing Competition was successfully organized and conducted. High school students from 26 schools across the state competed for prizes by growing large crystals of CuSO[subscript4]·5(H[subscript2]O). This paper describes how the event was planned and carried…

  5. The High Time Resolution Spectrometer (HTRS) aboard the International X-ray Observatory (IXO)

    NARCIS (Netherlands)

    Barret, Didier; Ravera, Laurent; Bodin, Pierre; Amoros, Carine; Boutelier, Martin; Glorian, Jean-Michel; Godet, Olivier; Orttner, Guillaume; Lacombe, Karine; Pons, Roger; Rambaud, Damien; Ramon, Pascale; Ramchoun, Souad; Biffi, Jean-Marc; Belasic, Marielle; Clédassou, Rodolphe; Faye, Delphine; Pouilloux, Benjamin; Motch, Christian; Michel, Laurent; Lechner, Peter H.; Niculae, Adrian; Strueder, Lothar W.; Distratis, Giuseppe; Kendziorra, Eckhard; Santangelo, Andréa; Tenzer, Christoph; Wende, Henning; Wilms, Joern; Kreykenbohm, Ingo; Schmid, Christian; Paltani, Stéphane; Cadoux, Franck; Fiorini, Carlo; Bombelli, Luca; Méndez, Mariano; Mereghetti, Sandro

    2010-01-01

    The High Time Resolution Spectrometer (HTRS) is one of the five focal plane instruments of the International X-ray Observatory (IXO). The HTRS is the only instrument matching the top level mission requirement of handling a one Crab X-ray source with an efficiency greater than 10%. It will provide IX

  6. Subsurface Signature of the Internal Wave Field Radiated by Submerged High Reynolds Number Stratified Wakes

    Science.gov (United States)

    2014-05-26

    parametric subharmonic instability. 15. SUBJECT TERMS Stratified turbulent wakes, high Reynolds numbers, internal waves, nonlinear effects, harmonics, mean...beam and the potential for parametric subharmonic instability. In all these efforts, a uniform linear stratification was considered. A subset of our...found for all simulated waves. c) For sufficiently high-amplitude beams, a parametric subharmonic instability is observed after a long enough time

  7. 10th International Conference on Spectral and High-Order Methods

    CERN Document Server

    Berzins, Martin; Hesthaven, Jan

    2015-01-01

    The book contains a selection of high quality papers, chosen among the best presentations during the International Conference on Spectral and High-Order Methods (2014), and provides an overview of the depth and breadth of the activities within this important research area.  The carefully reviewed selection of papers will provide the reader with a snapshot of the state-of-the-art and help initiate new research directions through the extensive biography.

  8. Comparison of thermal damage of the internal thoracic artery using ultra high radiofrequency and monopolar diathermy.

    Science.gov (United States)

    Bulat, Cristijan; Pešutić-Pisac, Valdi; Capkun, Vesna; Marović, Zlatko; Pogorelić, Zenon; Družijanić, Nikica

    2014-10-01

    The internal thoracic artery (ITA) has been accepted worldwide as a first choice conduit for myocardial revascularisation. It still remains questionable what is the best method for ITA harvesting in a skeletonized fashion according to structural integrity of artery, as a risk factor of early and late graft failure. The purpose of this study was to determine the impact of the ultra-high radiofrequency energy used for ITA harvesting on arterial structural integrity, in particular on the endothelial layer. Seventy-four ITA specimens were divided into two groups depending on device used for harvesting (radiofrequency-knife (RF) or electrocauter (EC)). Thermal damage on arterial structural integrity was measured using light microscope, morphometric imaging analysis and immunohistochemical methods. Thermal damage of endothelium was 2.8 times higher in EC than in RF group (p = 0.041) and 5 times higher in patients older than 66 years of age (p = 0.002). Extent of endothelial damage (graded from 0 to 3) was significantly higher in EC group (p = 0.03). Also, in EC group, in patients older than 66 years of age higher proportion of extent of endothelial damage was found (p = 0.027). The endothelial damage was more often in EC than in RF group as in the patients older than 66 years of age. Demonstrated results suggest that the radiosurgery in comparison to conventional electrocautery is safe and effective method, and significantly reduces thermal damage to endothelial layer of artery. Copyright © 2013 Royal College of Surgeons of Edinburgh (Scottish charity number SC005317) and Royal College of Surgeons in Ireland. Published by Elsevier Ltd. All rights reserved.

  9. High-power high-efficiency GaAlAs superluminescent diodes with an internal absorber for lasing suppression

    Energy Technology Data Exchange (ETDEWEB)

    Kwong, N.S.K.; Lau, K.Y.; Bar-Chaim, N.

    1989-04-01

    The operation principles of a high-power high-efficiency GaAlAs superluminescent diode based on an internal absorber for lasing suppression will be described. The absorber is based on an unpumped/reverse biased section in the device, and the superluminescent diode characteristic depends heavily on the bias condition on the absorber section. The very high efficiency of the device arises from the strong waveguiding effect of the buried heterostructure. A theory which accurately describes the various device characteristics will be described.

  10. A Ku band internally matched high power GaN HEMT amplifier with over 30% of PAE

    Science.gov (United States)

    Qin, Ge; Xiaojuan, Chen; Weijun, Luo; Tingting, Yuan; Yan, Pu; Xinyu, Liu

    2012-01-01

    We report a high power Ku band internally matched power amplifier (IMPA) with high power added efficiency (PAE) using 0.3 μm AlGaN/GaN high electron mobility transistors (HEMTs) on 6H-SiC substrate. The internal matching circuit is designed to achieve high power output for the developed devices with a gate width of 4 mm. To improve the bandwidth of the amplifier, a T type pre-matching network is used at the input and output circuits, respectively. After optimization by a three-dimensional electromagnetic (3D-EM) simulator, the amplifier demonstrates a maximum output power of 42.5 dBm (17.8 W), PAE of 30% to 36.4% and linear gain of 7 to 9.3 dB over 13.8-14.3 GHz under a 10% duty cycle pulse condition when operated at Vds = 30 V and Vgs = -4 V. At such a power level and PAE, the amplifier exhibits a power density of 4.45 W/mm.

  11. A Ku band internally matched high power GaN HEMT amplifier with over 30%of PAE

    Institute of Scientific and Technical Information of China (English)

    Ge Qin; Chen Xiaoiuan; Luo Weijun; Yuan Tingting; Pu Yan; Liu Xinyu

    2012-01-01

    We report a high power Ku band internally matched power amplifier (IMPA) with high power added efficiency (PAE) using 0.3 μm AlGaN/GaN high electron mobility transistors (HEMTs) on 6H-SiC substrate.The internal matching circuit is designed to achieve high power output for the developed devices with a gate width of 4 mm.To improve the bandwidth of the amplifier,a T type pre-matching network is used at the input and output circuits,respectively.After optimization by a three-dimensional electromagnetic (3D-EM) simulator,the amplifier demonstrates a maximum output power of 42.5 dBm (17.8 W),PAE of 30% to 36.4% and linear gain of 7 to 9.3 dB over 13.8-14.3 GHz under a 10% duty cycle pulse condition when operated at Vds =30 V and Vgs =-4 V.At such a power level and PAE,the amplifier exhibits a power density of 4.45 W/mm.

  12. Demonstration of omnidirectional photoluminescence (ODPL) spectroscopy for precise determination of internal quantum efficiency of radiation in GaN single crystals

    Science.gov (United States)

    Kojima, Kazunobu; Ikeda, Hirotaka; Fujito, Kenji; Chichibu, Shigefusa F.

    2017-07-01

    For rating unambiguous performance of a light-emitting semiconductor material, determination of the absolute quantum efficiency (AQE) of radiation, which is basically a product of internal quantum efficiency (IQE) and light-extraction efficiency, is the most delightful way. Here, we propose the use of omnidirectional photoluminescence (ODPL) spectroscopy for quantifying AQE of the near-band-edge (NBE) emission, in order to evaluate bulk GaN crystals and wafers. When the measurement was carried out in the air, the AQE showed a continuous decrease most likely due to the formation of extrinsic nonradiative recombination channels at the surface by photo-pumping. However, such an influence was suppressed by measuring ODPL in an inert ambient such as nitrogen or in vacuum. Consequently, AQE was revealed to depend on the photo-pumping density. The increase in AQE of the NBE emission caused by the increase in the excess carrier concentration was significant, indicating gradual saturation of nonradiative recombination centers in the bulk of GaN. The highest AQE value (8.22%) ever reported for the NBE emission of GaN at room temperature, which corresponds to IQE of 70.9%, was eventually obtained from the GaN wafer grown by hydride vapor phase epitaxy on a GaN seed crystal manufactured by the acidic ammonothermal method, when the cw photo-pumping density was 66 W/cm2.

  13. China-first superpower in international trade with high-tech products

    Directory of Open Access Journals (Sweden)

    Ecaterina Stanculescu

    2013-05-01

    Full Text Available The article tries to make a picture of the last five years of the Chinese international trade with high-technology (HT products. China is after 2006 the biggest commercial force on the international market for HT products, exceeding EU and USA. Its international trade grew rapidely in the field of exports and more slowly for imports, the ballance sheet going from a negative sold to a positive one from 2007 to 2011 (the analized period of time. China disposes of a great potential both for export and import and it is one of the most important partners of EU in this field. China exports and imports, in different proportions, mainly computers and office machines, electronics and telecommunications apparatus, scientific instruments, electrical machineries and other HT products, the prospects for the years to come being hardly encouraging.

  14. Internal Curing Using Water-releasing Material for High Strength Micro-expansive Concrete

    Institute of Scientific and Technical Information of China (English)

    LU Linnu; YANG Wen; HE Yongjia; WU Jing; HU Shuguang

    2009-01-01

    Due to its low water content,it is difficult for expansive agent to have an effective expansive effect on high strength concrete to compensate its extensive shrinkage and form a certain expansion.To solve this problem,water-releasing material with water storage and releasing characteristics was incorporated into high strength micro-expansive concrete to provide internal curing,and expansive effect of expansive agent was improved.Migration of water from initially saturated water-releasing material to the surrounding hydrating cement paste was investigated.Based on a given efficient diffusion distance of water stored in water-releasing material,the mass and real water-cement ratio of cured cement paste were estimated.At the same time,the effect of internal curing of water-releasing material on the volume deformation of high strength micro-expansive concrete was investigated.

  15. 76 FR 13495 - Extending Provisions of the International Organizations Immunities Act to the Office of the High...

    Science.gov (United States)

    2011-03-11

    ... Provisions of the International Organizations Immunities Act to the Office of the High Representative in... International Organizations Immunities Act (59 Stat. 669, 22 U.S.C. 288), and the Extending Immunities to the..., exemptions, and immunities provided by the International Organizations Act be extended to the Office of...

  16. Internal resonance of an elastic body levitated above high-Tc superconducting bulks

    Energy Technology Data Exchange (ETDEWEB)

    Kokuzawa, T; Toshihiko, S; Yoshizawa, M, E-mail: sugiura@mech.keio.ac.j [Mechanical Engineering, Keio University, 3-14-1 Hiyoshi, Kohoku-ku, Yokohama (Japan)

    2010-06-01

    In high-Tc superconducting magnetic levitation systems, levitated bodies can keep stable levitation with no contact and no control and thus their damping is very small. Thanks to these features, their applications to various apparatus are expected. However, on account of their small damping, the nonlinearity of electromagnetic levitation force can give notable effects upon motion of the levitated bodies. Therefore this nonlinearity must be taken into account to accurately analyze the dynamical behavior of the levitated bodies. Structures of such a levitated body can show elastic deformation if the large electromagnetic force acts on it. Therefore, we need to deal with the model as an elastic body. As mentioned above, nonlinear characteristics easily appear in this elastic vibration on account of the small damping. Especially when the ratio of the natural frequencies of the eigenmodes is integer, internal resonance can occur. This nonlinear resonance is derived from nonlinear interactions among the eigenmodes of the elastic levitated body. This kind of internal resonance of an elastic body appearing in high-Tc superconducting levitation systems has not been studied so far. This research especially deals with internal resonance of a beam supported at both its ends by electromagnetic forces acting on permanent magnets. The governing equation with the nonlinear boundary conditions for the dynamics of a levitated beam has been derived. Numerical results show internal resonance of the 1st mode and the 3rd mode. Experimental results are qualitatively in good agreement with numerical ones.

  17. Internal filtration, filtration fraction, and blood flow resistance in high- and low-flux dialyzers.

    Science.gov (United States)

    Schneditz, Daniel; Zierler, Edda; Vanholder, Raymond; Eloot, Sunny

    2014-01-01

    It was the aim to examine the fluid flow in blood and dialysate compartments of highly permeable hollow fiber dialyzers where internal filtration contributes to solute removal but where excessive filtration bears a risk of cell activation and damage. Flow characteristics of high- (HF) and low-flux (LF) dialyzers were studied in lab-bench experiments using whole bovine blood. Measurements obtained under different operating conditions and under zero net ultrafiltration were compared to theoretical calculations obtained from a mathematical model. Experimental resistances in the blood compartment were within ±2% of those calculated from the model when dialysate was used as a test fluid. With whole blood, the experimental resistances in the blood compartment were only 81.8 ± 2.8% and 83.7 ± 4.3% of those calculated for the LF and HF dialyzer, respectively. Surprisingly, measured blood flow resistance slightly but significantly decreased with increasing flow rate (p filtration fraction, while overall internal filtration increased. The increase in internal filtration when increasing blood flow is associated with a beneficial reduction in internal filtration fraction. Concerns of increased hemoconcentration when increasing blood flow therefore appear to be unwarranted.

  18. High-internal-phase emulsions stabilized by metal-organic frameworks and derivation of ultralight metal-organic aerogels

    Science.gov (United States)

    Zhang, Bingxing; Zhang, Jianling; Liu, Chengcheng; Peng, Li; Sang, Xinxin; Han, Buxing; Ma, Xue; Luo, Tian; Tan, Xiuniang; Yang, Guanying

    2016-01-01

    To design high-internal-phase emulsion (HIPE) systems is of great interest from the viewpoints of both fundamental researches and practical applications. Here we demonstrate for the first time the utilization of metal-organic framework (MOF) for HIPE formation. By stirring the mixture of water, oil and MOF at room temperature, the HIPE stabilized by the assembly of MOF nanocrystals at oil-water interface could be formed. The MOF-stabilized HIPE provides a novel route to produce highly porous metal-organic aerogel (MOA) monolith. After removing the liquids from the MOF-stabilized HIPE, the ultralight MOA with density as low as 0.01 g·cm−3 was obtained. The HIPE approach for MOA formation has unique advantages and is versatile in producing different kinds of ultralight MOAs with tunable porosities and structures. PMID:26892258

  19. Prompt high-energy emission from gamma-ray bursts in the internal shock model

    CERN Document Server

    Bosnjak, Z; Dubus, G

    2008-01-01

    The prompt GRB emission is thought to arise from electrons accelerated in internal shocks propagating within a highly relativistic outflow. The launch of Fermi offers the prospect of observations with unprecedented sensitivity in high-energy (>100 MeV) gamma-rays. The aim is to explore the predictions for HE emission from internal shocks, taking into account both dynamical and radiative aspects, and to deduce how HE observations constrain the properties of the relativistic outflow. The emission is modeled by combining a time-dependent radiative code with a dynamical code giving the evolution of the physical conditions in the shocked regions.Synthetic lightcurves and spectra are compared to observations. The HE emission deviates significantly from analytical estimates, which tend to overpredict the IC component, when the time dependence and full cross-sections are included. The exploration of the parameter space favors the case where the dominant process in the BATSE range is synchrotron emission. The HE compo...

  20. International Conference on Modern Mathematical Methods and High Performance Computing in Science and Technology

    CERN Document Server

    Srivastava, HM; Venturino, Ezio; Resch, Michael; Gupta, Vijay

    2016-01-01

    The book discusses important results in modern mathematical models and high performance computing, such as applied operations research, simulation of operations, statistical modeling and applications, invisibility regions and regular meta-materials, unmanned vehicles, modern radar techniques/SAR imaging, satellite remote sensing, coding, and robotic systems. Furthermore, it is valuable as a reference work and as a basis for further study and research. All contributing authors are respected academicians, scientists and researchers from around the globe. All the papers were presented at the international conference on Modern Mathematical Methods and High Performance Computing in Science & Technology (M3HPCST 2015), held at Raj Kumar Goel Institute of Technology, Ghaziabad, India, from 27–29 December 2015, and peer-reviewed by international experts. The conference provided an exceptional platform for leading researchers, academicians, developers, engineers and technocrats from a broad range of disciplines ...

  1. De-internationalization of small high technology firms: An international entrepreneurship perspective

    DEFF Research Database (Denmark)

    Turcan, Romeo V.

    This study explores the process of de-internationalisation in small high-technology firms. The key research questions are how and why these firms de-internationalise. Being positioned at the intersection of entrepreneurship and international business research paths, the study expressly investigates...... whether de-internationalisation could be viewed as (i) an entrepreneurial activity; and/or (ii) an integral part of a small high-technology firms’ growth process. Driven by the nature of the research questions, a multiple-case study methodology was adopted for the purpose of theory building. Five firms...... by reduction was employed extensively to advance middle-range theories. The study contributes to (i) international business research by developing a process model of de-internationalisation and defining its constructs; (ii) entrepreneurship research by redefining the entrepreneurial orientation construct...

  2. Education Payload Operation - Demonstrations

    Science.gov (United States)

    Keil, Matthew

    2009-01-01

    Education Payload Operation - Demonstrations (EPO-Demos) are recorded video education demonstrations performed on the International Space Station (ISS) by crewmembers using hardware already onboard the ISS. EPO-Demos are videotaped, edited, and used to enhance existing NASA education resources and programs for educators and students in grades K-12. EPO-Demos are designed to support the NASA mission to inspire the next generation of explorers.

  3. GASIS demonstration

    Energy Technology Data Exchange (ETDEWEB)

    Vidas, E.H. [Energy and Environmental Analysis, Inc., Arlington, VA (United States)

    1995-04-01

    A prototype of the GASIS database and retrieval software has been developed and is the subject of this poster session and computer demonstration. The prototype consists of test or preliminary versions of the GASIS Reservoir Data System and Source Directory datasets and the software for query and retrieval. The prototype reservoir database covers the Rocky Mountain region and contains the full GASIS data matrix (all GASIS data elements) that will eventually be included on the CD-ROM. It is populated for development purposes primarily by the information included in the Rocky Mountain Gas Atlas. The software has been developed specifically for GASIS using Foxpro for Windows. The application is an executable file that does not require Foxpro to run. The reservoir database software includes query and retrieval, screen display, report generation, and data export functions. Basic queries by state, basin, or field name will be assisted by scrolling selection lists. A detailed query screen will allow record selection on the basis of any data field, such as depth, cumulative production, or geological age. Logical operators can be applied to any-numeric data element or combination of elements. Screen display includes a {open_quotes}browse{close_quotes} display with one record per row and a detailed single record display. Datasets can be exported in standard formats for manipulation with other software packages. The Source Directory software will allow record retrieval by database type or subject area.

  4. 77 FR 8758 - International Fisheries; Western and Central Pacific Fisheries for Highly Migratory Species; High...

    Science.gov (United States)

    2012-02-15

    .... NMFS data indicate that U.S. albacore troll vessels operating in the Convention Area conduct at-sea.... albacore troll vessels in the area of application of the Convention. It is likely that all of these transshipments took place on the high seas. The available data indicate that no U.S. albacore troll vessel...

  5. Ampicillin in Combination with Ceftaroline, Cefepime, or Ceftriaxone Demonstrates Equivalent Activities in a High-Inoculum Enterococcus faecalis Infection Model.

    Science.gov (United States)

    Luther, Megan K; Rice, Louis B; LaPlante, Kerry L

    2016-05-01

    Ampicillin-ceftriaxone combination therapy has become a predominant treatment for serious Enterococcus faecalis infections, such as endocarditis. Unfortunately, ceftriaxone use is associated with future vancomycin-resistant enterococcus colonization. We evaluated E. faecalis in an in vitro pharmacodynamic model against simulated human concentration-time profiles of ampicillin plus ceftaroline, cefepime, ceftriaxone, or gentamicin. Ampicillin-cefepime and ampicillin-ceftaroline demonstrated activities similar to those of ampicillin-ceftriaxone against E. faecalis.

  6. Demonstration of New, Highly Perchlorate-Selective Ion Exchange Resin Coupled with Resin-Optimized, Single-Vessel Engineering Design

    Science.gov (United States)

    2013-03-01

    this issue less of a risk and concern for the success of the demonstration. Another factor affecting the overall cost performance equation is...aquifers in populated areas and hence entered some potable water sources. Health studies have found that perchlorate can mimic iodine in the human thyroid...entering the top of the vessels and exiting to bottom. This operational mode has two deficiencies . First, the long operating time in the down-flow

  7. A broad G protein-coupled receptor internalization assay that combines SNAP-tag labeling, diffusion-enhanced resonance energy transfer, and a highly emissive terbium cryptate acceptor

    Directory of Open Access Journals (Sweden)

    Angélique eLEVOYE

    2015-11-01

    Full Text Available Although G protein-coupled receptor (GPCR internalization has long been considered a major aspect of the desensitization process that tunes ligand responsiveness, internalization is also involved in receptor resensitization and signaling, as well as the ligand scavenging function of some atypical receptors. Internalization thus contributes to the diversity of GPCR-dependent signaling, and its dynamics and quantification in living cells has generated considerable interest. We developed a robust and sensitive assay to follow and quantify ligand-induced and constitutive GPCR internalization but also receptor recycling in living cells. This assay is based on diffusion-enhanced resonance energy transfer (DERET between cell surface GPCRs labeled with a luminescent terbium cryptate donor and a fluorescein acceptor present in the culture medium. GPCR internalization results in a quantifiable reduction of energy transfer. This method yields a high signal-to-noise ratio due to time-resolved measurements. For various GPCRs belonging to different classes, we demonstrated that constitutive and ligand-induced internalization could be monitored as a function of time and ligand concentration, thus allowing accurate quantitative determination of kinetics of receptor internalization but also half-maximal effective or inhibitory concentrations of compounds. In addition to its selectivity and sensitivity, we provided evidence that DERET-based internalization assay is particularly suitable for characterizing biased ligands. Furthermore, the determination of a Z’-factor value of 0.45 indicates the quality and suitability of DERET-based internalization assay for high-throughput screening (HTS of compounds that may modulate GPCRs internalization.

  8. A Broad G Protein-Coupled Receptor Internalization Assay that Combines SNAP-Tag Labeling, Diffusion-Enhanced Resonance Energy Transfer, and a Highly Emissive Terbium Cryptate.

    Science.gov (United States)

    Levoye, Angélique; Zwier, Jurriaan M; Jaracz-Ros, Agnieszka; Klipfel, Laurence; Cottet, Martin; Maurel, Damien; Bdioui, Sara; Balabanian, Karl; Prézeau, Laurent; Trinquet, Eric; Durroux, Thierry; Bachelerie, Françoise

    2015-01-01

    Although G protein-coupled receptor (GPCR) internalization has long been considered as a major aspect of the desensitization process that tunes ligand responsiveness, internalization is also involved in receptor resensitization and signaling, as well as the ligand scavenging function of some atypical receptors. Internalization thus contributes to the diversity of GPCR-dependent signaling, and its dynamics and quantification in living cells has generated considerable interest. We developed a robust and sensitive assay to follow and quantify ligand-induced and constitutive-induced GPCR internalization but also receptor recycling in living cells. This assay is based on diffusion-enhanced resonance energy transfer (DERET) between cell surface GPCRs labeled with a luminescent terbium cryptate donor and a fluorescein acceptor present in the culture medium. GPCR internalization results in a quantifiable reduction of energy transfer. This method yields a high signal-to-noise ratio due to time-resolved measurements. For various GPCRs belonging to different classes, we demonstrated that constitutive and ligand-induced internalization could be monitored as a function of time and ligand concentration, thus allowing accurate quantitative determination of kinetics of receptor internalization but also half-maximal effective or inhibitory concentrations of compounds. In addition to its selectivity and sensitivity, we provided evidence that DERET-based internalization assay is particularly suitable for characterizing biased ligands. Furthermore, the determination of a Z'-factor value of 0.45 indicates the quality and suitability of DERET-based internalization assay for high-throughput screening (HTS) of compounds that may modulate GPCRs internalization.

  9. Support for the 38th International Conference on High Energy Physics, 3-10 August 2016

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Young-Kee [Univ. of Chicago, IL (United States)

    2017-06-19

    The 38th International Conference on High Energy Physics (ICHEP) held in Chicago from August 3 to 10, 2016 was for physicists from around the world to gather to share the latest advancements in particle physics, astrophysics/cosmology, and accelerator science and to discuss plans for major future facilities. DOE funding provided partial support for space rental audio-visual services for scientific presentations at the conference.

  10. Summary of high field diffusion MRI and microscopy data demonstrate microstructural aberration in chronic mild stress rat brain

    DEFF Research Database (Denmark)

    Khan, Ahmad Raza; Chuhutin, Andrey; Wiborg, Ove

    2016-01-01

    Abstract This data article describes a large, high resolution diffusion MRI data set from fixed rat brain acquired at high field strength. The rat brain samples consist of21adult rat brain hemispheres from animals exposed to chronic mild stress (anhedonic and resilient) and controls. Histology from...

  11. Point of Proof: A Template for Evaluating Early College High Schools and Demonstrating Their Value to the Community

    Science.gov (United States)

    Rochford, Joseph A.

    2011-01-01

    Early College High Schools are unique, almost counter intuitive, creations. By design, they are to enable low income, minority, and even low performing students to earn a high school diploma and up to two years of college or an Associate Degree simultaneously. In order for this to happen youth, often as young as 14 or 15 years of age, must begin…

  12. Biophysical modeling of high field diffusion MRI demonstrates micro-structural aberration in chronic mild stress rat brain

    DEFF Research Database (Denmark)

    Khan, Ahmad Raza; Chuhutin, Andrey; Wiborg, Ove

    2016-01-01

    Abstract Depression is one of the leading causes of disability worldwide. Immense heterogeneity in symptoms of depression causes difficulty in diagnosis, and to date, there are no established biomarkers or imaging methods to examine depression. Unpredictable chronic mild stress (CMS) induced...... anhedonia is considered to be a realistic model of depression in studies of animal subjects. Stereological and neuronal tracing techniques have demonstrated persistent remodeling of microstructure in hippocampus, prefrontal cortex and amygdala of CMS brains. Recent developments in diffusion MRI (d...... changes in CMS rat brains and these parameters might have value in clinical diagnosis of depression and for evaluation of treatment efficacy....

  13. Demonstration of Two-Way Extremely High Frequency (EHF) Satellite Communication (SATCOM) Using Submarine-Survivable Phased Arrays

    Science.gov (United States)

    2009-01-01

    successfully using both the Military Strategic and Tactical Relay (MILSTAR) and Ultra High Frequency Follow-On ( UFO ) military satellites. The antennas...a Navy-qualified submarine FOT and High Power Amplifier (HPA) system, toward a MILSTAR or UFO EHF satellite. FULL-DUPLEX STATIC TESTING...both the K & Q band phased arrays. Both the MILSTAR and UFO satellites were used for this testing, based on availability. Using the Type 8 Mod 3

  14. Internal Anal Sphincter and Late Clinical Outcome in Patients with High Type Anorectal Malformation

    Directory of Open Access Journals (Sweden)

    Mirshemirani Ali Reza

    2009-05-01

    Full Text Available The purpose of this study is to investigate the age -related improvement of defecation function in high type anorectal malformation in relation to the assessment of the internal anal sphincter. The function of defecation was studied every 5 years up to 15 years postoperatively according to the Japanese scoring system in our hospital in 50 patients operated for high type (recto-urethral fistula imperforate anus with posterior sagital anorectoplasty (PSARP procedure in 25 patients, and 25patients with endorectal pull-through (ERPT. The internal anal sphincter was assessed by anorectal manometry and histology, and the results were analyzed with the clinical outcomes. The defecation scores of the PSARP cases exceeded those of ERPT cases at all age groups, the averaged total score were 7.0 in the PSARP cases vs. 4.6 for ERPT cases at 5 years old, 7.5 vs. 5.2 at 10 years old, and 8.0 vs. 6.7 at 15 years old. The anorectal reflex was seen in 17 of 25 (68% PSARP cases examined, whereas seen in 5 (20% of ERPT cases examined. Histologically, the well-developed and thickened internal circular muscle at the rectal end was found only in 40% of the cases, whereas discontinuation and hypoplasty of the muscle were seen in most of the cases examined. The present results indicate that the internal sphincter muscle at the rectal end may be histologically maldeveloped in high type anorectal malformations; however, they can potentially develop after transplanted and contribute to the improvement of passive continence in the late post-operative period.

  15. Research and development on transonic compressor of high pressure ratio turbocharger for vehicle internal combustion engines

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    The pressure ratio required for a turbocharger centrifugal compressor increases with internal combustion engine power density. High pressure ratio causes a transonic flow field at the impeller inducer. Transonic flow narrows the stable flow range and de-teriorates stage efficiency. In this work, an advanced high pressure ratio transonic compressor was designed. The experimental results show that the maximum pressure ratio of this turbocharger is about 4.2, the maximum efficiency is above 80% and the stable flow range at the designed rotating speed is up to 34%. A turbocharger with this transonic compressor has been applied to some vehicle research actually, and improved power density by 40%.

  16. Processing of Ni30Pt20Ti50 High-Temperature Shape-Memory Alloy Into Thin Rod Demonstrated

    Science.gov (United States)

    Noebe, Ronald D.; Draper, Susan L.; Biles, Tiffany A.; Leonhardt, Todd

    2005-01-01

    High-temperature shape-memory alloys (HTSMAs) based on nickel-titanium (NiTi) with significant ternary additions of palladium (Pd), platinum (Pt), gold (Au), or hafnium (Hf) have been identified as potential high-temperature actuator materials for use up to 500 C. These materials provide an enabling technology for the development of "smart structures" used to control the noise, emissions, or efficiency of gas turbine engines. The demand for these high-temperature versions of conventional shape-memory alloys also has been growing in the automotive, process control, and energy industries. However these materials, including the NiPtTi alloys being developed at the NASA Glenn Research Center, will never find widespread acceptance unless they can be readily processed into useable forms.

  17. First Demonstration of Direct Growth of Planar High-In-Composition InGaN Layers on Si

    Science.gov (United States)

    Kumar, Praveen; Rodriguez, Paul E. D. Soto; Gómez, Victor J.; Alvi, Naveed H.; Calleja, Enrique; Nötzel, Richard

    2013-03-01

    We report on the direct growth of high-In-composition InGaN layers on Si(111) by plasma-assisted molecular beam epitaxy without any buffer layers. In a narrow window of growth conditions, laterally extended, micrometer-sized planar areas are formed together with trenches and holes. Detailed structural and optical analyses reveal that the planar areas comprise the InGaN layer with high and uniform In composition, while the trenches and holes are associated with pure GaN and low-In-composition InGaN. Photoluminescence at low temperature is observed from the high-In-composition InGaN layer, which forms an ohmic contact with a p-Si substrate.

  18. PREFACE: International Conference on High Pressure Science and Technology, Joint AIRAPT-22 & HPCJ-50

    Science.gov (United States)

    Viña, Luis; Tejedor, Carlos; Calleja, José M.

    2010-01-01

    The International Joint AIRAPT-22 & HPCJ-50 Conference was held in Odaiba, Tokyo, on 26-31 July 2009. About 480 scientists from 24 countries attended the conference and 464 papers, including 3 plenary lectures, 39 invited talks, and 156 oral presentations, were presented. It is my great pleasure to present this proceedings volume, which is based on the high quality scientific works presented at the conference. The International AIRAPT conference has been held every two years in various countries around the world since 1965, while High Pressure Conference of Japan (HPCJ) has been held annually since 1959 in various Japanese cities. Pressure is a fundamental parameter to control the property of matter. As a result, both AIRAPT and HPCJ have become highly multidisciplinary, and cover Physics, Chemistry, Materials Science, Earth and Planetary Sciences, Biosciences, Food Science, and Technology. Although each discipline has a unique target, they all have high-pressure research in common. This proceedings volume includes about 200 papers of state-of-the-art studies from numerous fields. I hope this proceedings volume provides excellent pieces of information in various fields to further advance high-pressure research. Conference logo Takehiko Yagi Conference Chairman Institute for Solid State Physics The University of Tokyo 7 December 2009 Conference photograph Participants at the conference venue, Tokyo International Exchange Center, Odaiba, Tokyo, Japan. Editor in Chief TAKEMURA Kenichi National Institute for Materials Science, Japan Editorial board Tadashi KONDO Osaka University, Japan Hitoshi MATSUKI The University of Tokushima, Japan Nobuyuki MATUBAYASI Kyoto University, Japan Yoshihisa MORI Okayama University of Science, Japan Osamu OHTAKA Osaka University, Japan Chihiro SEKINE Muroran Institute of Technology, Japan

  19. Materials development and field demonstration of high-recycled-content concrete for energy-efficient building construction

    Energy Technology Data Exchange (ETDEWEB)

    Ostowari, Ken; Nosson, Ali

    2000-09-30

    The project developed high-recycled-content concrete material with balanced structural and thermal attributes for use in energy-efficient building construction. Recycled plastics, tire, wool, steel and concrete were used as replacement for coarse aggregates in concrete and masonry production. With recycled materials the specific heat and thermal conductivity of concrete could be tailored to enhance the energy-efficiency of concrete buildings. A comprehensive field project was implemented which confirmed the benefits of high-recycled-content concrete for energy-efficient building construction.

  20. Summary of high field diffusion MRI and microscopy data demonstrate microstructural aberration in chronic mild stress rat brain

    DEFF Research Database (Denmark)

    Khan, Ahmad Raza; Chuhutin, Andrey; Wiborg, Ove

    2016-01-01

    Abstract This data article describes a large, high resolution diffusion MRI data set from fixed rat brain acquired at high field strength. The rat brain samples consist of21adult rat brain hemispheres from animals exposed to chronic mild stress (anhedonic and resilient) and controls. Histology from...... amygdala of the same brain hemispheres is also included with three different stains: DiI and Hoechst stained microscopic images (confocal microscopy) andALDH1L1 antibody based immunohistochemistry.These stains may be used to evaluate neurite density (DiI), nuclear density (Hoechst) and astrocytic density...

  1. PREFACE: International Conference on Computing in High Energy and Nuclear Physics (CHEP'07)

    Science.gov (United States)

    Sobie, Randall; Tafirout, Reda; Thomson, Jana

    2007-07-01

    The 2007 International Conference on Computing in High Energy and Nuclear Physics (CHEP) was held on 2-7 September 2007 in Victoria, British Columbia, Canada. CHEP is a major series of international conferences for physicists and computing professionals from the High Energy and Nuclear Physics community, Computer Science and Information Technology. The CHEP conference provides an international forum to exchange information on computing experience and needs for the community, and to review recent, ongoing, and future activities. The CHEP'07 conference had close to 500 attendees with a program that included plenary sessions of invited oral presentations, a number of parallel sessions comprising oral and poster presentations, and an industrial exhibition. Conference tracks covered topics in Online Computing, Event Processing, Software Components, Tools and Databases, Software Tools and Information Systems, Computing Facilities, Production Grids and Networking, Grid Middleware and Tools, Distributed Data Analysis and Information Management and Collaborative Tools. The conference included a successful whale-watching excursion involving over 200 participants and a banquet at the Royal British Columbia Museum. The next CHEP conference will be held in Prague in March 2009. We would like thank the sponsors of the conference and the staff at the TRIUMF Laboratory and the University of Victoria who made the CHEP'07 a success. Randall Sobie and Reda Tafirout CHEP'07 Conference Chairs

  2. Developing a high-performance team training framework for internal medicine residents: the ABC'S of teamwork.

    Science.gov (United States)

    Carbo, Alexander R; Tess, Anjala V; Roy, Christopher; Weingart, Saul N

    2011-06-01

    Effective teamwork and communication can prevent error and mitigate harm. High-performance team training was developed in the aviation industry for flight crews and is being incorporated in health care settings, such as emergency departments, operating rooms, and labor and delivery suites. We translated and adapted high-performance teamwork and communication principles from other industries and other disciplines to an inpatient internal medicine environment. We selected key principles from aviation and anesthesia crew training programs in 2004 and organized them into the ABC'S of teamwork. These included appropriate Assertiveness, effective Briefings, Callback and verification, Situational awareness, and Shared mental models. Based on this content, we developed a training session for internal medicine residents and faculty, and evaluated learners' patient safety attitudes and knowledge before and after training with a written survey. More than 50 residents participated in the module. The percentage of correct answers on a question related to key teamwork principles increased from 35% before training to 67% after training (P = 0.03). Before training, 65% of the residents reported that they "would feel comfortable telling a senior clinician his/her plan was unsafe"; this increased to 94% after training (P = 0.005). After the training session, residents were able to provide examples from their clinical practice that emphasized all of the ABC'S of teamwork. Teamwork principles can be adapted from other disciplines and applied to internal medicine. After a single session, residents displayed greater knowledge of teamwork principles and reported changed attitudes toward key teamwork behaviors.

  3. Biophysical modeling of high field diffusion MRI demonstrates micro-structural aberration in chronic mild stress rat brain.

    Science.gov (United States)

    Khan, Ahmad Raza; Chuhutin, Andrey; Wiborg, Ove; Kroenke, Christopher D; Nyengaard, Jens R; Hansen, Brian; Jespersen, Sune Nørhøj

    2016-11-15

    Depression is one of the leading causes of disability worldwide. Immense heterogeneity in symptoms of depression causes difficulty in diagnosis, and to date, there are no established biomarkers or imaging methods to examine depression. Unpredictable chronic mild stress (CMS) induced anhedonia is considered to be a realistic model of depression in studies of animal subjects. Stereological and neuronal tracing techniques have demonstrated persistent remodeling of microstructure in hippocampus, prefrontal cortex and amygdala of CMS brains. Recent developments in diffusion MRI (d-MRI) analyses, such as neurite density and diffusion kurtosis imaging (DKI), are able to capture microstructural changes and are considered to be robust tools in preclinical and clinical imaging. The present study utilized d-MRI analyzed with a neurite density model and the DKI framework to investigate microstructure in the hippocampus, prefrontal cortex, caudate putamen and amygdala regions of CMS rat brains by comparison to brains from normal controls. To validate findings of CMS induced microstructural alteration, histology was performed to determine neurite, nuclear and astrocyte density. d-MRI based neurite density and tensor-based mean kurtosis (MKT) were significantly higher, while mean diffusivity (MD), extracellular diffusivity (Deff) and intra-neurite diffusivity(DL) were significantly lower in the amygdala of CMS rat brains. Deff was also significantly lower in the hippocampus and caudate putamen in stressed groups. Histological neurite density corroborated the d-MRI findings in the amygdala and reductions in nuclear and astrocyte density further buttressed the d-MRI results. The present study demonstrated that the d-MRI based neurite density and MKT can reveal specific microstructural changes in CMS rat brains and these parameters might have value in clinical diagnosis of depression and for evaluation of treatment efficacy.

  4. Highly Stable Tetra-Phenolato Titanium(IV Agent Formulated into Nanoparticles Demonstrates Anti-Tumoral Activity and Selectivity

    Directory of Open Access Journals (Sweden)

    Sigalit Meker

    2015-10-01

    Full Text Available Titanium(IV complexes exhibit high potential as anti-tumor agents, particularly due to their low intrinsic toxicity and cytotoxicity toward cisplatin resistant cells. Nevertheless, Ti(IV complexes generally undergo rapid hydrolysis that previously hampered their utilization as anticancer drugs. We recently overcame this difficulty by developing a highly stable Ti(IV complex that is based on tetra-phenolato, hexadentate ligand, formulated into organic nanoparticles. Herein we investigated the activity of this complex in vitro and in vivo. Although inactive when tested directly due to poor solubility, when formulated, this complex displayed (a high cytotoxicity toward cisplatin resistant human ovarian cells, A2780-cp, with resistance factor of 1.1; (b additive behavior in combination with cisplatin toward ovarian and colon cancer cells; (c selectivity toward cancer cells as implied by its mild activity toward non-cancerous, fibroblast lung cells, MRC-5; (d high stability and durability as manifested by the ability to maintain cytotoxicity, even following one week of incubation in 100% aquatic medium solution; and (e in vivo efficacy toward solid tumors of human colon cancer cells, HT-29, in nude mice without any clinical signs of toxicity. These features support the formulated phenolato Ti(IV complex being an effective and selective anti-tumoral agent.

  5. Preconceptual design study for solidifying high-level waste: Appendices A, B and C West Valley Demonstration Project

    Energy Technology Data Exchange (ETDEWEB)

    Hill, O.F. (comp.)

    1981-04-01

    This report presents a preconceptual design study for processing radioactive high-level liquid waste presently stored in underground tanks at Western New York Nuclear Service Center (WNYNSC) near West Valley, New York, and for incorporating the radionculides in that waste into a solid. The high-level liquid waste accumulated from the operation of a chemical reprocessing plant by the Nuclear Fuel Services, Inc. from 1966 to 1972. The high-level liquid waste consists of approximately 560,000 gallons of alkaline waste from Purex process operations and 12,000 gallons of acidic (nitric acid) waste from one campaign of processing thoria fuels by a modified Thorex process (during this campaign thorium was left in the waste). The alkaline waste contains approximately 30 million curies and the acidic waste contains approximately 2.5 million curies. The reference process described in this report is concerned only with chemically processing the high-level liquid waste to remove radionuclides from the alkaline supernate and converting the radionuclide-containing nonsalt components in the waste into a borosilicate glass.

  6. Hypoxanthine production by ischemic heart demonstrated by high pressure liquid chromatography of blood purine nucleosides and oxypurines

    NARCIS (Netherlands)

    E. Harmsen; J.W. de Jong (Jan Willem); P.W.J.C. Serruys (Patrick)

    1981-01-01

    textabstractAn isocratic high pressure liquid chromatographic system was developed for the estimation of purine nucleosides and oxypurines in blood. Use was made of a reversed-phase column. Nucleotides derived from erythrocytes affected the separation; these compounds were removed with A12O3. The

  7. International biosecurity symposium : securing high consequence pathogens and toxins : symposium summary.

    Energy Technology Data Exchange (ETDEWEB)

    2004-06-01

    The National Nuclear Security Administration (NNSA) Office of Nonproliferation Policy sponsored an international biosecurity symposium at Sandia National Laboratories (SNL). The event, entitled 'Securing High Consequence Pathogens and Toxins', took place from February 1 to February 6, 2004 and was hosted by Dr. Reynolds M. Salerno, Principal Member of the Technical Staff and Program Manager of the Biosecurity program at Sandia. Over 60 bioscience and policy experts from 14 countries gathered to discuss biosecurity, a strategy aimed at preventing the theft and sabotage of dangerous pathogens and toxins from bioscience facilities. Presentations delivered during the symposium were interspersed with targeted discussions that elucidated, among other things, the need for subsequent regional workshops on biosecurity, and a desire for additional work toward developing international biosecurity guidelines.

  8. A commitment to high-value care education from the internal medicine community.

    Science.gov (United States)

    Smith, Cynthia D; Levinson, Wendy S

    2015-05-05

    The Alliance for Academic Internal Medicine, American Board of Internal Medicine (ABIM), ABIM Foundation, and American College of Physicians are collaborating to enhance the education of physicians in high-value care (HVC) and make its practice an essential competency in undergraduate and postgraduate education by 2017. This article serves as the organizations' formal commitment to providing a foundation of HVC education on which others may build. The 5 key targets for HVC education are experiential learning and curriculum, environment and culture, clinical support, regulatory requirements, and sustainability. The goal is to train future health care professionals for whom HVC is part of normal practice, thus providing patients with improved clinical outcomes at a lower cost.

  9. The Creation and Operation of Internal High Performance Modern Enterprises Team

    Institute of Scientific and Technical Information of China (English)

    Shengyu WANG

    2015-01-01

    The future of enterprises mainly depends on product research and development. For the modern enterprises, high performance project team is the most important means of R & D projects. According to the interviews and survey found of a plurality of enterprise project R & D team. the internal high performance team of modern business is good or bad, its key lies in whether the team managers for the team creation and management is in place, this is the most difficult place for the high performance team management system, especially the team leadership. Based on this, this paper discusses on the creation and management of high performance modern enterprise team, aiming to provide valuable reference for the enterprise team management.

  10. A high efficiency C-band internally-matched harmonic tuning GaN power amplifier

    Science.gov (United States)

    Lu, Y.; Zhao, B. C.; Zheng, J. X.; Zhang, H. S.; Zheng, X. F.; Ma, X. H.; Hao, Y.; Ma, P. J.

    2016-09-01

    In this paper, a high efficiency C-band gallium nitride (GaN) internally-matched power amplifier (PA) is presented. This amplifier consists of 2-chips of self-developed GaN high-electron mobility transistors (HEMTs) with 16 mm total gate width on SiC substrate. New harmonic manipulation circuits are induced both in the input and output matching networks for high efficiency matching at fundamental and 2nd-harmonic frequency, respectively. The developed amplifier has achieved 72.1% power added efficiency (PAE) with 107.4 W output power at 5 GHz. To the best of our knowledge, this amplifier exhibits the highest PAE in C-band GaN HEMT amplifiers with over 100 W output power. Additionally, 1000 hours' aging test reveals high reliability for practical applications.

  11. Evolutions and Trends in the International Trade with High-Tech Products

    Directory of Open Access Journals (Sweden)

    Ecaterina Stănculescu

    2009-07-01

    Full Text Available One of the ways for accessing knowledge and, through it, for competitivity on international level, is the world trade with high-tech (HT products. European Union and its Member States (Romania inclusive position on international HT market defines in fact their competitivity in the global economy. Many politics for encourage innovation in a country lead also to stimulate the technological transfer out of that country. Politics that reduce trade barriers and uncertainties in international trade relations have the potential to increase the international technology transfer. The weight of HT products and services in the entire world trade is around of 19-20%, this percentage varying in different studies and statistics due to the products groups considered to be part of this category and to the inclusion of some adjacent services. During 2001-2008, the world HT export value increased in average by 7% per year. The growth rates were fairly high, by one hand, because of the rising of exported/imported products complexity (and of advanced technologies, and by the other hand, due to the evolution of global demand and offer, that influence the prices of these products. The Popular Republic of China was the country that influenced mostly the increase of international trade with HT products. Four economies – China, United States, EU – 27 and Japan – totalize over one half of the world HT exports. USA and EU registered also the most important commercial deficits in the world in this field until 2008. In 2008, USA deficit turns into commercial surplus in HT area because of the decrease of imports following the crisis. As for Romania, the weight of HT products exports and imports in the whole country’s trade differs from about 4%, in exports case, to about 9-10%, in that of imports. Commercial balance in this field was always in the red. During 2001-2008, the greatest weights in the world trade with HT products have had, in order, the groups

  12. Intra-arterial high signals on arterial spin labeling perfusion images predict the occluded internal carotid artery segment

    Energy Technology Data Exchange (ETDEWEB)

    Sogabe, Shu; Satomi, Junichiro; Tada, Yoshiteru; Kanematsu, Yasuhisa; Kuwayama, Kazuyuki; Yagi, Kenji; Yoshioka, Shotaro; Mizobuchi, Yoshifumi; Mure, Hideo; Yamaguchi, Izumi; Kitazato, Keiko T.; Nagahiro, Shinji [Tokushima University Graduate School, Department of Neurosurgery, Tokushima (Japan); Abe, Takashi; Harada, Masafumi [Tokushima University Graduate School, Department of Radiology, Tokushima (Japan); Yamamoto, Nobuaki; Kaji, Ryuji [Tokushima University Graduate School, Department of Clinical Neurosciences, Institute of Biomedical Biosciences, Tokushima (Japan)

    2017-06-15

    Arterial spin labeling (ASL) involves perfusion imaging using the inverted magnetization of arterial water. If the arterial arrival times are longer than the post-labeling delay, labeled spins are visible on ASL images as bright, high intra-arterial signals (IASs); such signals were found within occluded vessels of patients with acute ischemic stroke. The identification of the occluded segment in the internal carotid artery (ICA) is crucial for endovascular treatment. We tested our hypothesis that high IASs on ASL images can predict the occluded segment. Our study included 13 patients with acute ICA occlusion who had undergone angiographic and ASL studies within 48 h of onset. We retrospectively identified the high IAS on ASL images and angiograms and recorded the occluded segment and the number of high IAS-positive slices on ASL images. The ICA segments were classified as cervical (C1), petrous (C2), cavernous (C3), and supraclinoid (C4). Of seven patients with intracranial ICA occlusion, five demonstrated high IASs at C1-C2, suggesting that high IASs could identify stagnant flow proximal to the occluded segment. Among six patients with extracranial ICA occlusion, five presented with high IASs at C3-C4, suggesting that signals could identify the collateral flow via the ophthalmic artery. None had high IASs at C1-C2. The mean number of high IAS-positive slices was significantly higher in patients with intra- than extracranial ICA occlusion. High IASs on ASL images can identify slow stagnant and collateral flow through the ophthalmic artery in patients with acute ICA occlusion and help to predict the occlusion site. (orig.)

  13. Closure of digital arteries in high vascular tone states as demonstrated by measurement of systolic blood pressure in the fingers

    DEFF Research Database (Denmark)

    Krähenbühl, B; Nielsen, S L; Lassen, N A

    1977-01-01

    Finger systolic blood pressure (FSP) was measured indirectly in normal subjects and patients with primary Raynaud phenomenon by applying a thin-walled plastic cuff around the finger and a strain gauge more distally to detect volume changes. Inducing a high vascular tone in one or more fingers...... by direct cooling or intra-arterial noradrenaline infusion caused a marked drop in FSP in the exposed fingers, but not in the non-exposed fingers of the same hand. The fact that the non-exposed fingers retained the normal (arm systolic) pressure level is taken to indicate that palmar arch blood pressure...... also remained normal. In the high vascular tone state, a large transmural pressure difference must apparently be established before the digital arteries are forced open. The lowered opening pressure constitutes a manifestation of the closure phenomenon of the digital arteries described in patients...

  14. Closure of digital arteries in high vascular tone states as demonstrated by measurement of systolic blood pressure in the fingers

    DEFF Research Database (Denmark)

    Krähenbühl, B; Nielsen, S L; Lassen, N A

    1977-01-01

    Finger systolic blood pressure (FSP) was measured indirectly in normal subjects and patients with primary Raynaud phenomenon by applying a thin-walled plastic cuff around the finger and a strain gauge more distally to detect volume changes. Inducing a high vascular tone in one or more fingers...... by direct cooling or intra-arterial noradrenaline infusion caused a marked drop in FSP in the exposed fingers, but not in the non-exposed fingers of the same hand. The fact that the non-exposed fingers retained the normal (arm systolic) pressure level is taken to indicate that palmar arch blood pressure...... also remained normal. In the high vascular tone state, a large transmural pressure difference must apparently be established before the digital arteries are forced open. The lowered opening pressure constitutes a manifestation of the closure phenomenon of the digital arteries described in patients...

  15. Phylogenetic and Functional Analysis of Metagenome Sequence from High-Temperature Archaeal Habitats Demonstrate Linkages between Metabolic Potential and Geochemistry

    DEFF Research Database (Denmark)

    Inskeep, William P; Jay, Zackary J; Herrgard, Markus;

    2013-01-01

    Geothermal habitats in Yellowstone National Park (YNP) provide an unparalleled opportunity to understand the environmental factors that control the distribution of archaea in thermal habitats. Here we describe, analyze, and synthesize metagenomic and geochemical data collected from seven high......-temperature sites that contain microbial communities dominated by archaea relative to bacteria. The specific objectives of the study were to use metagenome sequencing to determine the structure and functional capacity of thermophilic archaeal-dominated microbial communities across a pH range from 2.5 to 6.......4 and to discuss specific examples where the metabolic potential correlated with measured environmental parameters and geochemical processes occurring in situ. Random shotgun metagenome sequence (∼40-45 Mb Sanger sequencing per site) was obtained from environmental DNA extracted from high-temperature sediments and...

  16. Phylogenetic and functional analysis of metagenome sequence from high-temperature archaeal habitats demonstrate linkages between metabolic potential and geochemistry

    Directory of Open Access Journals (Sweden)

    William P. Inskeep

    2013-05-01

    Full Text Available Geothermal habitats in Yellowstone National Park (YNP provide an unparalled opportunity to understand the environmental factors that control the distribution of archaea in thermal habitats. Here we describe, analyze and synthesize metagenomic and geochemical data collected from seven high-temperature sites that contain microbial communities dominated by archaea relative to bacteria. The specific objectives of the study were to use metagenome sequencing to determine the structure and functional capacity of thermophilic archaeal-dominated microbial communities across a pH range from 2.5 to 6.4 and to discuss specific examples where the metabolic potential correlated with measured environmental parameters and geochemical processes occurring in situ. Random shotgun metagenome sequence (~40-45 Mbase Sanger sequencing per site was obtained from environmental DNA extracted from high-temperature sediments and/or microbial mats and subjected to numerous phylogenetic and functional analyses. Analysis of individual sequences (e.g., MEGAN and G+C content and assemblies from each habitat type revealed the presence of dominant archaeal populations in all environments, 10 of whose genomes were largely reconstructed from the sequence data. Analysis of protein family occurrence, particularly of those involved in energy conservation, electron transport and autotrophic metabolism, revealed significant differences in metabolic strategies across sites consistent with differences in major geochemical attributes (e.g., sulfide, oxygen, pH. These observations provide an ecological basis for understanding the distribution of indigenous archaeal lineages across high temperature systems of YNP.

  17. Phylogenetic and Functional Analysis of Metagenome Sequence from High-Temperature Archaeal Habitats Demonstrate Linkages between Metabolic Potential and Geochemistry.

    Science.gov (United States)

    Inskeep, William P; Jay, Zackary J; Herrgard, Markus J; Kozubal, Mark A; Rusch, Douglas B; Tringe, Susannah G; Macur, Richard E; Jennings, Ryan deM; Boyd, Eric S; Spear, John R; Roberto, Francisco F

    2013-01-01

    Geothermal habitats in Yellowstone National Park (YNP) provide an unparalleled opportunity to understand the environmental factors that control the distribution of archaea in thermal habitats. Here we describe, analyze, and synthesize metagenomic and geochemical data collected from seven high-temperature sites that contain microbial communities dominated by archaea relative to bacteria. The specific objectives of the study were to use metagenome sequencing to determine the structure and functional capacity of thermophilic archaeal-dominated microbial communities across a pH range from 2.5 to 6.4 and to discuss specific examples where the metabolic potential correlated with measured environmental parameters and geochemical processes occurring in situ. Random shotgun metagenome sequence (∼40-45 Mb Sanger sequencing per site) was obtained from environmental DNA extracted from high-temperature sediments and/or microbial mats and subjected to numerous phylogenetic and functional analyses. Analysis of individual sequences (e.g., MEGAN and G + C content) and assemblies from each habitat type revealed the presence of dominant archaeal populations in all environments, 10 of whose genomes were largely reconstructed from the sequence data. Analysis of protein family occurrence, particularly of those involved in energy conservation, electron transport, and autotrophic metabolism, revealed significant differences in metabolic strategies across sites consistent with differences in major geochemical attributes (e.g., sulfide, oxygen, pH). These observations provide an ecological basis for understanding the distribution of indigenous archaeal lineages across high-temperature systems of YNP.

  18. Spin-symmetry conversion and internal rotation in high J molecular systems

    Science.gov (United States)

    Mitchell, Justin; Harter, William

    2006-05-01

    Dynamics and spectra of molecules with internal rotation or rovibrational coupling is approximately modeled by rigid or semi-rigid rotors with attached gyroscopes. Using Rotational Energy (RE)^1 surfaces, high resolution molecular spectra for high angular momentum show two distinct but related phenomena; spin-symmetry conversion and internal rotation. For both cases the high total angular momentum allows for transitions that would otherwise be forbidden. Molecular body-frame J-localization effects associated with tight energy level-clusters dominate the rovibronic spectra of high symmetry molecules, particularly spherical tops at J>10. ^2 The effects include large and widespread spin-symmetry mixing contrary to conventional wisdom^3 about weak nuclear moments. Such effects are discussed showing how RE surface plots may predict them even at low J. Classical dynamics of axially constrained rotors are approximated by intersecting rotational-energy-surfaces (RES) that have (J-S).B.(J-S) forms in the limit of constraints that do no work. Semi-classical eigensolutions are compared to those found by direct diagonalization. ^1 W.G Hater, in Handbook of Atomic, Molecular and Optical Physics, edited by G.W.F Drake (Springer, Germany 2006) ^2 W. G. Harter, Phys. Rev. A24,192-262(1981). ^3 G. Herzberg, Infrared and Raman Spectra (VanNostrand 1945) pp. 458,463.

  19. An easily regenerable enzyme reactor prepared from polymerized high internal phase emulsions.

    Science.gov (United States)

    Ruan, Guihua; Wu, Zhenwei; Huang, Yipeng; Wei, Meiping; Su, Rihui; Du, Fuyou

    2016-04-22

    A large-scale high-efficient enzyme reactor based on polymerized high internal phase emulsion monolith (polyHIPE) was prepared. First, a porous cross-linked polyHIPE monolith was prepared by in-situ thermal polymerization of a high internal phase emulsion containing styrene, divinylbenzene and polyglutaraldehyde. The enzyme of TPCK-Trypsin was then immobilized on the monolithic polyHIPE. The performance of the resultant enzyme reactor was assessed according to the conversion ability of Nα-benzoyl-l-arginine ethyl ester to Nα-benzoyl-l-arginine, and the protein digestibility of bovine serum albumin (BSA) and cytochrome (Cyt-C). The results showed that the prepared enzyme reactor exhibited high enzyme immobilization efficiency and fast and easy-control protein digestibility. BSA and Cyt-C could be digested in 10 min with sequence coverage of 59% and 78%, respectively. The peptides and residual protein could be easily rinsed out from reactor and the reactor could be regenerated easily with 4 M HCl without any structure destruction. Properties of multiple interconnected chambers with good permeability, fast digestion facility and easily reproducibility indicated that the polyHIPE enzyme reactor was a good selector potentially applied in proteomics and catalysis areas.

  20. REVIEW: Internal high linear energy transfer (LET) targeted radiotherapy for cancer

    Science.gov (United States)

    Allen, Barry J.

    2006-07-01

    High linear energy transfer (LET) radiation for internal targeted therapy has been a long time coming on to the medical therapy scene. While fundamental principles were established many decades ago, the clinical implementation has been slow. Localized neutron capture therapy, and more recently systemic targeted alpha therapy, are at the clinical trial stage. What are the attributes of these therapies that have led a band of scientists and clinicians to dedicate so much of their careers? High LET means high energy density, causing double strand breaks in DNA, and short-range radiation, sparing adjacent normal tissues. This targeted approach complements conventional radiotherapy and chemotherapy. Such therapies fail on several fronts. Foremost is the complete lack of progress for the control of primary GBM, the holy grail for cancer therapies. Next is the inability to regress metastatic cancer on a systemic basis. This has been the task of chemotherapy, but palliation is the major application. Finally, there is the inability to inhibit the development of lethal metastatic cancer after successful treatment of the primary cancer. This review charts, from an Australian perspective, the developing role of local and systemic high LET, internal radiation therapy.

  1. Demonstration and Radiation Extension mode of Agricultural Technology——A Case of the Science and Technology Project of High Yield in Hebei Province

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    Firstly,relying on the science and technology project of high yield in Hebei Province,connotation of agricultural technology demonstration and extension mode and the high yield grain project in Hebei Province is introduced.Extension mode of agricultural technology demonstration and radiation is constructed.Agricultural technology demonstration and radiation mode includes the radiation center,primary irradiation and secondary irradiation.Secondly,management system and operational mechanism of agricultural technology demonstration and radiation mode are discussed,mainly expressed in establishing leading group in each demonstration county(city),carrying out leader contract responsibility system,establishing expert advisor steering group and setting up core experts group for subject,establishing technical experts group for subject,setting up leading group in the radiation area,carrying out chief expert responsibility system and technician matrix responsibility system,establishing the operating mechanism of "open,flow,competition and collaboration" with "test area-expert two-way selection" as the core content.Finally,countermeasures to improve the agricultural technology demonstration and radiation mode is put forward,such as establishing the rural technology demonstration base,strengthening cooperation with enterprises,and adopting flexible technical training,so as to promote the spread of agricultural high-tech,to increase the contribution rate of agricultural technology,and to offer ideas for agricultural technology extension model at the new era.

  2. Biofluid metabotyping of occupationally exposed subjects to air pollution demonstrates high oxidative stress and deregulated amino acid metabolism

    Science.gov (United States)

    Pradhan, Surya Narayan; Das, Aleena; Meena, Ramovatar; Nanda, Ranjan Kumar; Rajamani, Paulraj

    2016-10-01

    Occupational exposure to air pollution induces oxidative stress and prolonged exposure increases susceptibility to cardiovascular and respiratory diseases in several working groups. Biofluid of these subjects may reflect perturbed metabolic phenotypes. In this study we carried out a comparative molecular profiling study using parallel biofluids collected from subjects (n = 85) belonging to auto rickshaw drivers (ARD), traffic cops (TC) and office workers (OW). Higher levels of oxidative stress and inflammation markers in serum of ARD subjects were observed as compared to OW and TC. Uni and multivariate analyses of metabolites identified in urine by 1H NMR revealed 11 deregulated molecules in ARD subjects and involved in phenylalanine, histidine, arginine and proline metabolism. Despite contribution of confounding factors like exposure period, dietary factors including smoking and alcohol status, our results demonstrate existence of exposure specific metabotypes in biofluids of ARD, OW and TC groups. Monitoring serum oxidative stress and inflammation markers and urine metabolites by NMR may be useful to characterize perturbed metabolic phenotypes in populations exposed to urban traffic air pollution.

  3. Biofluid metabotyping of occupationally exposed subjects to air pollution demonstrates high oxidative stress and deregulated amino acid metabolism

    Science.gov (United States)

    Pradhan, Surya Narayan; Das, Aleena; Meena, Ramovatar; Nanda, Ranjan Kumar; Rajamani, Paulraj

    2016-01-01

    Occupational exposure to air pollution induces oxidative stress and prolonged exposure increases susceptibility to cardiovascular and respiratory diseases in several working groups. Biofluid of these subjects may reflect perturbed metabolic phenotypes. In this study we carried out a comparative molecular profiling study using parallel biofluids collected from subjects (n = 85) belonging to auto rickshaw drivers (ARD), traffic cops (TC) and office workers (OW). Higher levels of oxidative stress and inflammation markers in serum of ARD subjects were observed as compared to OW and TC. Uni and multivariate analyses of metabolites identified in urine by 1H NMR revealed 11 deregulated molecules in ARD subjects and involved in phenylalanine, histidine, arginine and proline metabolism. Despite contribution of confounding factors like exposure period, dietary factors including smoking and alcohol status, our results demonstrate existence of exposure specific metabotypes in biofluids of ARD, OW and TC groups. Monitoring serum oxidative stress and inflammation markers and urine metabolites by NMR may be useful to characterize perturbed metabolic phenotypes in populations exposed to urban traffic air pollution. PMID:27767182

  4. Representation and high-quality annotation of the Physcomitrella patens transcriptome demonstrates a high proportion of proteins involved in metabolism in mosses.

    Science.gov (United States)

    Lang, D; Eisinger, J; Reski, R; Rensing, S A

    2005-05-01

    To gain insight into the transcriptome of the well-used plant model system Physcomitrella patens, several EST sequencing projects have been undertaken. We have clustered, assembled, and annotated all publicly available EST and CDS sequences in order to represent the transcriptome of this non-seed plant. Here, we present our fully annotated knowledge resource for the Physcomitrella patens transcriptome, integrating annotation from the production process of the clustered sequences and from a high-quality annotation pipeline developed during this study. Each transcript is represented as an entity containing full annotations and GO term associations. The whole production, filtering, clustering, and annotation process is being modelled and results in seven datasets, representing the annotated Physcomitrella transcriptome from different perspectives. We were able to annotate 63.4 % of the 26 123 virtual transcripts. The transcript archetype, as covered by our clustered data, is compared to a compilation based on all available Physcomitrella full length CDS. The distribution of the gene ontology annotations (GOA) for the virtual transcriptome of Physcomitrella patens demonstrates consistency in the ratios of the core molecular functions among the plant GOA. However, the metabolism subcategory is over-represented in bryophytes as compared to seed plants. This observation can be taken as an indicator for the wealth of alternative metabolic pathways in moss in comparison to spermatophytes. All resources presented in this study have been made available to the scientific community through a suite of user-friendly web interfaces via www.cosmoss.org and form the basis for assembly and annotation of the moss genome, which will be sequenced in 2005.

  5. Removal of High -Concentration and Refractory Organic Matter from Diosgenin Manufacture Wastewater : a case study of a demonstration project in Hubei Province, P R China

    Science.gov (United States)

    Bao, J.; Wang, L.

    2009-12-01

    Wastewater from diosgenin manufacture is dark brown (3,500 ~4,000 times of the chroma) and acidic(pH=0.8~1.5)with high concentration of organic matter(COD=25,000~38,000 mg/L)and poor biodegradability(BOD5/COD= 0.25~0.30). It is highly toxic to biota due to the water-soluble saponin, tannins and pectin. Therefore removal of the organic matter is of great importance before the discharge of the wastewater into the environment. Here we presented a set of data from a demonstration project in Hubei province, P R China with an improved technics. This technics, focusing on the treatment of diosgenin wastewater, included hydrolytic acidification, internal electrolysis, neutralization, aerating-improved Up-flow Anaerobic Sludge Bed (UASB) and bio-contact oxidation treatment in sequence to remove the organic matter. After 60 days of starting-up, the water quality from hydrolytic acidification reactor was greatly improved. The effluent became clear, indicating the obvious removal of suspended solids in the water; the ratio of BOD/COD increased to 0.44, suggesting an significant increase of biodegradability; the content of volatile fatty acid (VFA) increased from 22.6 mmol/L to 86.8 mmol/L and the volume loading of COD reached 9.48 kg COD/(m3d). Basically at this stage the removal efficiency of COD was stabilized at 25%. Further treatment was conducted on the effluent from hydrolytic acidification reactor through the Improved UASB Reactor after the internal electrolysis and neutralization. The Improved UASB Reactor can start up at room temperature with an influent of 1,500 mg/L COD and inflow rate of 50(m3/d). Then, temperature was increased gradually to 38 oC (± 2 oC) to optimize the growth of the mesophilic anaerobes in the reactor. The content of VFA of the effluent was controlled below 8 mmol/L to guarantee the pH in the range of 6.8~7.2. After 150 days of debugging, the COD of the influent to UASB increased to 9,600 mg/L, hydraulic retaining time (HRT) was around 70 hrs

  6. Strategic business planning for internal medicine.

    Science.gov (United States)

    Ervin, F R

    1996-07-01

    The internal medicine generalist is at market risk with expansion of managed care. The cottage industry of Academic Departments of internal medicine should apply more business tools to the internal medicine business problem. A strength, weakness, opportunity, threat (SWOT) analysis demonstrates high vulnerability to the internal medicine generalist initiative. Recommitment to the professional values of internal medicine and enhanced focus on the master clinician as the competitive core competency of internal medicine will be necessary to retain image and market share.

  7. Over-the-air demonstration of spatial multiplexing at high data rates using real-time base-band processing

    Directory of Open Access Journals (Sweden)

    V. Jungnickel

    2004-01-01

    Full Text Available Over-the-air transmission experiments with a realtime MIMO test-bed are reported. We describe in principle a hardware architecture for spatial multiplexing at high data rates, discuss in detail the implementation on a hybrid FPGA/DSP platform and show measured bit error rates from indoor transmission experiments. Per-antenna rate control and joint transmission are enabled as well using an ideal feed-back link. A functional test of these new techniques is described while detailed transmission experiments are still ongoing.

  8. Design and operating features of the high-level waste vitrification system for the West Valley demonstration project

    Energy Technology Data Exchange (ETDEWEB)

    Siemens, D.H.; Beary, M.M.; Barnes, S.M.; Berger, D.N.; Brouns, R.A.; Chapman, C.C.; Jones, R.M.; Peters, R.D.; Peterson, M.E.

    1986-03-01

    A liquid-fed joule-heated ceramic melter system is the reference process for immobilization of the high-level liquid waste in the US and several foreign countries. This system has been under development for over ten years at Pacific Northwest Laboratory and other national laboratories operated for the US Department of Energy. Pacific Northwest Laboratory contributed to this research through its Nuclear Waste Treatment Program and used applicable data to design and test melters and related systems using remote handling of simulated radioactive wastes. This report describes the equipment designed in support of the high-level waste vitrification program at West Valley, New York. Pacific Northwest Laboratory worked closely with West Valley Nuclear Services Company to design a liquid-fed ceramic melter, a liquid waste preparation and feed tank and pump, an off-gas treatment scrubber, and an enclosed turntable for positioning the waste canisters. Details of these designs are presented including the rationale for the design features and the alternatives considered.

  9. Vinyl Ester Oligomer Crosslinked Porous Polymers Prepared via Surfactant-Free High Internal Phase Emulsions

    Directory of Open Access Journals (Sweden)

    Yun Zhu

    2012-01-01

    Full Text Available Using vinyl ester resin (VER containing styrene (or methyl methacrylate and vinyl ester oligomer (VEO as external phase, Pickering high internal phase emulsions (Pickering HIPEs having internal phase volume fraction of up to 95 vol% were prepared with copolymer particles as sole stabilizer. Polymerizing the external phase of these Pickering HIPEs led to porous polymers (poly-Pickering-HIPEs. Compared to the polystyrene- (PS- based poly-Pickering-HIPEs which were prepared with mixture of styrene and divinylbenzene (DVB as crosslinker, the poly-Pickering-HIPEs herein showed much higher elastic modulus and toughness. The elastic modulus of these poly-Pickering-HIPEs increased with increasing the VEO concentration in the external phase, while it decreased with increasing internal phase volume fraction. Increasing VEO concentration in the external phase also resulted in a decrease in the average void diameter as well as a narrow void diameter distribution of the resulting poly-Pickering-HIPEs. In addition, there were many small pores in the voids surface caused by the volume contraction of VER during the polymerization, which suggests a new method to fabricate porous polymers having a well-defined hierarchical pore structure.

  10. Series multilayer internal electrodes for high energy density glass-ceramic capacitors

    Institute of Scientific and Technical Information of China (English)

    LUO Jun; DU Jun; TANG Qun; MAO ChangHui

    2009-01-01

    The glass-ceramic dielectrics and internal electrode structures are investigated for improving the general energy storage density of capacitors.Calculation indicates that glass-ceramics acquired from glass matrix annealing at 850℃ for 3 hours can be approximately up to 17 J/cm3 in energy storage density.They are appropriately chosen as the dielectrics for preparing high energy storage density capacitors (HESDCs).A series multilayer structure of internal electrode is developed for the HESDCs,in which each layer is a combination of gold film and silver paste.This electrode structure promises the capacitor immune from the residual porosity defects inevitably brought by electrode paste sintering process,and specifically improves the electrical breakdown strength of the capacitor.Based on this new electrode structure,the energy storage densities of capacitors are increased by more than one order of magnitude compared with those traditional ones with only single layer of internal electrode.Thus,HESDCs based on the optimized glass-ceramic dielectrics can potentially achieve 7.5 J/cm3 in energy storage density,even taking into consideration the enlargement of total capacitor volumes while encapsulating practicable capacitors from dielectrics media.

  11. The Interaction of High-Speed Turbulence with Flames: Global Properties and Internal Flame Structure

    CERN Document Server

    Poludnenko, Alexei Y; 10.1016/j.combustflame.2009.11.018

    2011-01-01

    We study the dynamics and properties of a turbulent flame, formed in the presence of subsonic, high-speed, homogeneous, isotropic Kolmogorov-type turbulence in an unconfined system. Direct numerical simulations are performed with Athena-RFX, a massively parallel, fully compressible, high-order, dimensionally unsplit, reactive-flow code. A simplified reaction-diffusion model represents a stoichiometric H2-air mixture. The system being modeled represents turbulent combustion with the Damkohler number Da = 0.05 and with the turbulent velocity at the energy injection scale 30 times larger than the laminar flame speed. The simulations show that flame interaction with high-speed turbulence forms a steadily propagating turbulent flame with a flame brush width approximately twice the energy injection scale and a speed four times the laminar flame speed. A method for reconstructing the internal flame structure is described and used to show that the turbulent flame consists of tightly folded flamelets. The reaction zon...

  12. RADIATION DOSIMETRY OF THE PRESSURE VESSEL INTERNALS OF THE HIGH FLUX BEAM REACTOR.

    Energy Technology Data Exchange (ETDEWEB)

    HOLDEN,N.E.; RECINIELLO,R.N.; HU,J.P.; RORER,D.C.

    2002-08-18

    In preparation for the eventual decommissioning of the High Flux Beam Reactor after the permanent removal of its fuel elements from the Brookhaven National Laboratory, both measurements and calculations of the decay gamma-ray dose rate have been performed for the reactor pressure vessel and vessel internal structures which included the upper and lower thermal shields, the transition plate, and the control rod blades. The measurements were made using Red Perspex{trademark} polymethyl methacrylate high-level film dosimeters, a Radcal ''peanut'' ion chamber, and Eberline's high-range ion chamber. To compare with measured gamma-ray dose rate, the Monte Carlo MCNP code and geometric progressive Microshield code were used to model the gamma transport and dose buildup.

  13. Retractions in general and internal medicine in a high-profile scientific indexing database

    Directory of Open Access Journals (Sweden)

    Renan Moritz Varnier Rodrigues de Almeida

    Full Text Available CONTEXT AND OBJECTIVE: Increased frequency of retractions has recently been observed, and retractions are important events that deserve scientific investigation. This study aimed to characterize cases of retraction within general and internal medicine in a high-profile database, with interest in the country of origin of the article and the impact factor (IF of the journal in which the retraction was made. DESIGN AND SETTING: This study consisted of reviewing retraction notes in the Thomson-Reuters Web of Knowledge (WoK indexing database, within general and internal medicine. METHODS: The retractions were classified as plagiarism/duplication, error, fraud and authorship problems and then aggregated into two categories: "plagiarism/duplication" and "others." The countries of origin of the articles were dichotomized according to the median of the indicator "citations per paper" (CPP, and the IF was dichotomized according to its median within general and internal medicine, also obtained from the WoK database. These variables were analyzed using contingency tables according to CPP (high versus low, IF (high versus low and period (1992-2002 versus 2003-2014. The relative risk (RR and 95% confidence interval (CI were estimated for plagiarism/duplication. RESULTS: A total of 86 retraction notes were identified, and retraction reasons were found for 80 of them. The probability that plagiarism/duplication was the reason for retraction was more than three times higher for the low CPP group (RR: 3.4; 95% CI: [1.9-6.2], and similar results were seen for the IF analysis. CONCLUSION: The study identified greater incidence of plagiarism/duplication among retractions from countries with lower scientific impact.

  14. Alignment of Configuration and Documentation for Highly Engineered Complex Product Configuration Systems: a Demonstration from a Case Study

    DEFF Research Database (Denmark)

    Shafiee, Sara; Kristjansdottir, Katrin; Hvam, Lars

    2015-01-01

    Adequate documentation is critical for successful implementation, maintenance and further developments of product configuration system (PCS) specially in companies making complex and highly engineered products. This article is based on experience of modelling and utilizing a PCS from an Engineer......-To-Order (ETO), where the main focus is on the challenges concerned with the documentation of the PCS, both in the development and production phase. Aligning the development of the PCS with an automatic documentation system creates value. Using the suggested method for documentation facilitates the following...... activities: (1) iterative testing of the system during the development, (2) communication with domain experts, (3) documentation and maintenance, and finally (4) updates without spending a lot of time and resources. This article is supplemented with a case study from an ETO company where the method...

  15. Alignment of Configuration and Documentation for Highly Engineered Complex Product Configuration Systems: a Demonstration from a Case Study

    DEFF Research Database (Denmark)

    Shafiee, Sara; Kristjansdottir, Katrin; Hvam, Lars

    2015-01-01

    Adequate documentation is critical for successful implementation, maintenance and further developments of product configuration system (PCS) specially in companies making complex and highly engineered products. This article is based on experience of modelling and utilizing a PCS from an Engineer......-To-Order (ETO), where the main focus is on the challenges concerned with the documentation of the PCS, both in the development and production phase. Aligning the development of the PCS with an automatic documentation system creates value. Using the suggested method for documentation facilitates the following...... activities: (1) iterative testing of the system during the development, (2) communication with domain experts, (3) documentation and maintenance, and finally (4) updates without spending a lot of time and resources. This article is supplemented with a case study from an ETO company where the method...

  16. Phylogenetic and Functional Analysis of Metagenome Sequence from High-Temperature Archaeal Habitats Demonstrate Linkages between Metabolic Potential and Geochemistry

    DEFF Research Database (Denmark)

    Inskeep, William P; Jay, Zackary J; Herrgard, Markus

    2013-01-01

    from the sequence data. Analysis of protein family occurrence, particularly of those involved in energy conservation, electron transport, and autotrophic metabolism, revealed significant differences in metabolic strategies across sites consistent with differences in major geochemical attributes (e.......4 and to discuss specific examples where the metabolic potential correlated with measured environmental parameters and geochemical processes occurring in situ. Random shotgun metagenome sequence (∼40-45 Mb Sanger sequencing per site) was obtained from environmental DNA extracted from high-temperature sediments and....../or microbial mats and subjected to numerous phylogenetic and functional analyses. Analysis of individual sequences (e.g., MEGAN and G + C content) and assemblies from each habitat type revealed the presence of dominant archaeal populations in all environments, 10 of whose genomes were largely reconstructed...

  17. Integrated analyses of microRNAs demonstrate their widespread influence on gene expression in high-grade serous ovarian carcinoma.

    Directory of Open Access Journals (Sweden)

    Chad J Creighton

    Full Text Available BACKGROUND: The Cancer Genome Atlas (TCGA Network recently comprehensively catalogued the molecular aberrations in 487 high-grade serous ovarian cancers, with much remaining to be elucidated regarding the microRNAs (miRNAs. Here, using TCGA ovarian data, we surveyed the miRNAs, in the context of their predicted gene targets. METHODS AND RESULTS: Integration of miRNA and gene patterns yielded evidence that proximal pairs of miRNAs are processed from polycistronic primary transcripts, and that intronic miRNAs and their host gene mRNAs derive from common transcripts. Patterns of miRNA expression revealed multiple tumor subtypes and a set of 34 miRNAs predictive of overall patient survival. In a global analysis, miRNA:mRNA pairs anti-correlated in expression across tumors showed a higher frequency of in silico predicted target sites in the mRNA 3'-untranslated region (with less frequency observed for coding sequence and 5'-untranslated regions. The miR-29 family and predicted target genes were among the most strongly anti-correlated miRNA:mRNA pairs; over-expression of miR-29a in vitro repressed several anti-correlated genes (including DNMT3A and DNMT3B and substantially decreased ovarian cancer cell viability. CONCLUSIONS: This study establishes miRNAs as having a widespread impact on gene expression programs in ovarian cancer, further strengthening our understanding of miRNA biology as it applies to human cancer. As with gene transcripts, miRNAs exhibit high diversity reflecting the genomic heterogeneity within a clinically homogeneous disease population. Putative miRNA:mRNA interactions, as identified using integrative analysis, can be validated. TCGA data are a valuable resource for the identification of novel tumor suppressive miRNAs in ovarian as well as other cancers.

  18. Functional assessment of the Medicago truncatula NIP/LATD protein demonstrates that it is a high-affinity nitrate transporter.

    Science.gov (United States)

    Bagchi, Rammyani; Salehin, Mohammad; Adeyemo, O Sarah; Salazar, Carolina; Shulaev, Vladimir; Sherrier, D Janine; Dickstein, Rebecca

    2012-10-01

    The Medicago truncatula NIP/LATD (for Numerous Infections and Polyphenolics/Lateral root-organ Defective) gene encodes a protein found in a clade of nitrate transporters within the large NRT1(PTR) family that also encodes transporters of dipeptides and tripeptides, dicarboxylates, auxin, and abscisic acid. Of the NRT1(PTR) members known to transport nitrate, most are low-affinity transporters. Here, we show that M. truncatula nip/latd mutants are more defective in their lateral root responses to nitrate provided at low (250 μm) concentrations than at higher (5 mm) concentrations; however, nitrate uptake experiments showed no discernible differences in uptake in the mutants. Heterologous expression experiments showed that MtNIP/LATD encodes a nitrate transporter: expression in Xenopus laevis oocytes conferred upon the oocytes the ability to take up nitrate from the medium with high affinity, and expression of MtNIP/LATD in an Arabidopsis chl1(nrt1.1) mutant rescued the chlorate susceptibility phenotype. X. laevis oocytes expressing mutant Mtnip-1 and Mtlatd were unable to take up nitrate from the medium, but oocytes expressing the less severe Mtnip-3 allele were proficient in nitrate transport. M. truncatula nip/latd mutants have pleiotropic defects in nodulation and root architecture. Expression of the Arabidopsis NRT1.1 gene in mutant Mtnip-1 roots partially rescued Mtnip-1 for root architecture defects but not for nodulation defects. This suggests that the spectrum of activities inherent in AtNRT1.1 is different from that possessed by MtNIP/LATD, but it could also reflect stability differences of each protein in M. truncatula. Collectively, the data show that MtNIP/LATD is a high-affinity nitrate transporter and suggest that it could have another function.

  19. High internal phase emulsions (HIPEs) and polymerised HIPEs (PolyHIPEs)

    CERN Document Server

    Cameron, N R

    1995-01-01

    High internal phase emulsions (HIPEs) possess an internal phase volume ratio (phi) greater than 0.74. Novel non-aqueous HIPEs can be obtained from a non-polar organic liquid, such as petroleum ether, dispersed in a highly polar medium, such as formamide or dimethylsulfoxide. The system is stabilised with block copolymer surfactants of suitable HLB number. Polymerisation of a HIPE continuous phase leads to a highly porous monolithic material known as PolyHIPE. These polymers often have a completely open-cellular structure. The mechanism for the formation of this morphology was elucidated by performing scanning electron microscopy (SEM) on frozen HIPE samples at various stages of polymerisation. The point of transition from emulsion to open-cell polymer was found to coincide with the gel-point of the system, implying that the interconnected structure forms as a result of contraction of the continuous phase thin films on polymerisation. Novel PolyHIPE materials have been prepared by chemical modification of cros...

  20. PREFACE: XIII International Conference on Calorimetry in High Energy Physics (CALOR 2008)

    Science.gov (United States)

    Livan, Michele

    2009-07-01

    The XIII International Conference on Calorimetry in High Energy Physics was held in Pavia, Italy, 26-30 May 2008, picking up the baton from the 2006 Conference in Chicago. The Conference took place in the unique environment of the Theresian Room of the University Library. The attendees were surrounded by over 40 000 books of general interest and culture, and had the opportunity to see precious volumes written by such people as Galileo, Volta and Faraday. The Workshop brought together more than 120 participants, including senior scientists as well as young physicists, confirming the central and ever-growing role of calorimeters in modern particle physics. The development of these detectors, as stressed by Professor Klaus Pretzl in his lectio magistralis, has made it possible to explore new frontiers in physics, and the present scenario is no exception to this rule. With the LHC experiments almost completely installed and ready to take data, the Conference was an ideal chance to review the status of the different projects, whose development has been followed and discussed throughout the entire Calor series, and to show that they are capable of meeting the design specifications. Other highlights were the performance and physics results of calorimeters installed in currently operating experiments. In the session on astrophysics and neutrinos, the contributions confirmed the key role of calorimeters in this sector and demonstrated their growing application even beyond the field of accelerator physics. Considerable time was devoted to the state-of-the-art techniques in the design and operation of the detectors, while the session on simulation addressed the importance of a thorough understanding of the shower development to meet the demanding requirements of present experiments. Finally, on the R&D side, the particle flow and dual read-out concepts confronted the challenges issued by the next generation of experiments. This complex material was reviewed in 83

  1. Repeated-High-Intensity-Running Activity and Internal Training Load of Elite Rugby Sevens Players During International Matches: A Comparison Between Halves.

    Science.gov (United States)

    Suarez-Arrones, Luis; Núñez, Javier; Sáez de Villareal, Eduardo; Gálvez, Javier; Suarez-Sanchez, Gabriel; Munguía-Izquierdo, Diego

    2016-05-01

    To describe the repeated-high-intensity activity and internal training load of rugby sevens players during international matches and to compare the differences between the 1st and 2nd halves. Twelve international-level male rugby sevens players were monitored during international competitive matches (n = 30 match files) using global positioning system technology and heart-rate monitoring. The relative total distance covered by the players throughout the match was 112.1 ± 8.4 m/ min. As a percentage of total distance, 35.0% (39.2 ± 9.0 m/min) was covered at medium speed and 17.1% (19.2 ± 6.8 m/min) at high speed. A substantial decrease in the distance covered at >14.0 km/h and >18.0 km/h, the number of accelerations of >2.78 m/s and >4.0 m/s, repeated-sprint sequences interspersed with ≤60 s rest, and repeated-acceleration sequences interspersed with ≤30 s or ≤60 s rest was observed in the 2nd half compared with the 1st half. A substantial increase in the mean heart rate (HR), HRmax, percentage of time at >80% HRmax and at >90% HRmax, and Edwards training load was observed in the 2nd half compared with the 1st half. This study provides evidence of a pronounced reduction in high-intensity and repeated-high-intensity activities and increases in internal training load in rugby sevens players during the 2nd half of international matches.

  2. Proposed apparatus for measuring internal friction in rocks at high temperatures and pressures: a design analysis

    Energy Technology Data Exchange (ETDEWEB)

    Bonner, B.P.

    1977-10-03

    An apparatus is described that measures internal friction in rocks at high temperatures (approximately 800/sup 0/C) and pressures (approximately 1.0 GPa). Steady oscillations (approximately 1.0 Hz) are induced in a jacketed sample while coaxial capacitive transducers monitor the resulting radial strain. Sample strains are continuously compared to the deformation of a low-loss standard, which acts as a stress transducer. The stress state produced is uniaxial stress. We use the theory of viscoelasticity to partition the loss into components depending on pure shear and dilatation. The theoretical results emphasize the importance of ultimately measuring each loss independently.

  3. Trends for International Standards of the High Speed Powerline Communication Technologies

    Science.gov (United States)

    Aramaki, Michimasa; Koga, Hisao; Atsuta, Akira

    The high speed powerline communication (PLC) technology is useful for a variety of applications especially for Smart Grid. Although the standardization of this technology has been desired for a long time, recently IEEE P1901 and ITU-T SG15 made significant progress and both of the Standards are expected to be completed by the end of 2010. The frame work of the coexistence mechanism among the different types of PLC technologies is also going to be resolved with the collaborative work between IEEE and ITU-T. In this paper, the authors introduce the summary of the International Standardizations of this technology, and also the future prospects of the Standards.

  4. Clinical phenotyping in selected national networks: demonstrating the need for high-throughput, portable, and computational methods.

    Science.gov (United States)

    Richesson, Rachel L; Sun, Jimeng; Pathak, Jyotishman; Kho, Abel N; Denny, Joshua C

    2016-07-01

    The combination of phenomic data from electronic health records (EHR) and clinical data repositories with dense biological data has enabled genomic and pharmacogenomic discovery, a first step toward precision medicine. Computational methods for the identification of clinical phenotypes from EHR data will advance our understanding of disease risk and drug response, and support the practice of precision medicine on a national scale. Based on our experience within three national research networks, we summarize the broad approaches to clinical phenotyping and highlight the important role of these networks in the progression of high-throughput phenotyping and precision medicine. We provide supporting literature in the form of a non-systematic review. The practice of clinical phenotyping is evolving to meet the growing demand for scalable, portable, and data driven methods and tools. The resources required for traditional phenotyping algorithms from expert defined rules are significant. In contrast, machine learning approaches that rely on data patterns will require fewer clinical domain experts and resources. Machine learning approaches that generate phenotype definitions from patient features and clinical profiles will result in truly computational phenotypes, derived from data rather than experts. Research networks and phenotype developers should cooperate to develop methods, collaboration platforms, and data standards that will enable computational phenotyping and truly modernize biomedical research and precision medicine. Copyright © 2016 Elsevier B.V. All rights reserved.

  5. Continuous assessment of land mapping accuracy at High Resolution from global networks of atmospheric and field observatories -concept and demonstration

    Science.gov (United States)

    Sicard, Pierre; Martin-lauzer, François-regis

    2017-04-01

    In the context of global climate change and adjustment/resilience policies' design and implementation, there is a need not only i. for environmental monitoring, e.g. through a range of Earth Observations (EO) land "products" but ii. for a precise assessment of uncertainties of the aforesaid information that feed environmental decision-making (to be introduced in the EO metadata) and also iii. for a perfect handing of the thresholds which help translate "environment tolerance limits" to match detected EO changes through ecosystem modelling. Uncertainties' insight means precision and accuracy's knowledge and subsequent ability of setting thresholds for change detection systems. Traditionally, the validation of satellite-derived products has taken the form of intensive field campaigns to sanction the introduction of data processors in Payload Data Ground Segments chains. It is marred by logistical challenges and cost issues, reason why it is complemented by specific surveys at ground-based monitoring sites which can provide near-continuous observations at a high temporal resolution (e.g. RadCalNet). Unfortunately, most of the ground-level monitoring sites, in the number of 100th or 1000th, which are part of wider observation networks (e.g. FLUXNET, NEON, IMAGINES) mainly monitor the state of the atmosphere and the radiation exchange at the surface, which are different to the products derived from EO data. In addition they are "point-based" compared to the EO cover to be obtained from Sentinel-2 or Sentinel-3. Yet, data from these networks, processed by spatial extrapolation models, are well-suited to the bottom-up approach and relevant to the validation of vegetation parameters' consistency (e.g. leaf area index, fraction of absorbed photosynthetically active radiation). Consistency means minimal errors on spatial and temporal gradients of EO products. Test of the procedure for land-cover products' consistency assessment with field measurements delivered by worldwide

  6. Internality and externality correlates of potential drivers among high school pupils in Holon (Israel).

    Science.gov (United States)

    Brook, U; Weitzman, A

    1994-01-01

    Car accidents are the leading causes of death and handicap among adolescents and young adults. Thirty-six pupils from the last class in high school (in the age group 17-18 years) have attended lectures with explanations concerning the consequences of car accidents by physicians of rehabilitation centers. They also were taken on a one-day visit to such a center. They have seen and talked with persons who were severely handicapped because of car accidents, and have followed the physical therapists and occupational healing therapists throughout their work day. The pupils completed the Rotter and Montag Internality-Externality Scale questionnaire before and after the meeting and staging with the handicaps, and the results showed an increase of 10.28% in their Internal focus of control. The conclusion is that confrontation of young future drivers with handicaps as a result of car accidents in rehabilitation centers should be a routine and regular habit during the last classes of high school.

  7. Perceptions of International Female Students toward E-Learning in Resolving High Education and Family Role Strain

    Science.gov (United States)

    Kibelloh, Mboni; Bao, Yukun

    2014-01-01

    It is a common phenomenon for many mature female international students enrolled in high education overseas to experience strain from managing conflicting roles of student and family, and difficulties of cross-cultural adjustment. The purpose of this study is to examine perceptions and behavioral intentions of international female students toward…

  8. Thermal Testing and Analysis of an Efficient High-Temperature Multi-Screen Internal Insulation

    Science.gov (United States)

    Weiland, Stefan; Handrick, Karin; Daryabeigi, Kamran

    2007-01-01

    Conventional multi-layer insulations exhibit excellent insulation performance but they are limited to the temperature range to which their components reflective foils and spacer materials are compatible. For high temperature applications, the internal multi-screen insulation IMI has been developed that utilizes unique ceramic material technology to produce reflective screens with high temperature stability. For analytical insulation sizing a parametric material model is developed that includes the main contributors for heat flow which are radiation and conduction. The adaptation of model-parameters based on effective steady-state thermal conductivity measurements performed at NASA Langley Research Center (LaRC) allows for extrapolation to arbitrary stack configurations and temperature ranges beyond the ones that were covered in the conductivity measurements. Experimental validation of the parametric material model was performed during the thermal qualification test of the X-38 Chin-panel, where test results and predictions showed a good agreement.

  9. Internal state variable models for micro- structure in high temperature deformation of titanium alloys

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    There exists an interaction between microstructural evolution and deformation behavior in high temperature deformation of titanium alloys. And the microstruc- ture of titanium alloys is very sensitive to the process parameters of plastic de- formation process. In this paper, on the basis of plastic deformation mechanism of metals and alloys, a microstructural model including dislocation density rate equa- tion and grain growth rate equation is established with the dislocation density rate being an internal state variable. Applying the model to the high temperature de- formation process of Ti60 titanium alloy, the average relative errors of grain sizes between the experiments and the predictions are 9.47% for sampled data, and 13.01% for non-sampled data.

  10. Internal state variable models for micro-structure in high temperature deformation of titanium alloys

    Institute of Scientific and Technical Information of China (English)

    LUO Jiao; LI MiaoQuan; LI XiaoLi

    2008-01-01

    There exists an interaction between microstructural evolution and deformation behavior in high temperature deformation of titanium alloys. And the microstruc-ture of titanium alloys is very sensitive to the process parameters of plastic de-formation process. In this paper, on the basis of plastic deformation mechanism of metals and alloys, a microstructural model including dislocation density rate equa-tion and grain growth rate equation is established with the dislocation density rate being an internal state variable. Applying the model to the high temperature de-formation process of Ti60 titanium alloy, the average relative errors of grain sizes between the experiments and the predictions are 9.47% for sampled data, and 13.01% for non-sampled data.

  11. 7th International Workshop on Parallel Tools for High Performance Computing

    CERN Document Server

    Gracia, José; Nagel, Wolfgang; Resch, Michael

    2014-01-01

    Current advances in High Performance Computing (HPC) increasingly impact efficient software development workflows. Programmers for HPC applications need to consider trends such as increased core counts, multiple levels of parallelism, reduced memory per core, and I/O system challenges in order to derive well performing and highly scalable codes. At the same time, the increasing complexity adds further sources of program defects. While novel programming paradigms and advanced system libraries provide solutions for some of these challenges, appropriate supporting tools are indispensable. Such tools aid application developers in debugging, performance analysis, or code optimization and therefore make a major contribution to the development of robust and efficient parallel software. This book introduces a selection of the tools presented and discussed at the 7th International Parallel Tools Workshop, held in Dresden, Germany, September 3-4, 2013.  

  12. Separation of heavy metals from water by functionalized glycidyl methacrylate poly (high internal phase emulsions).

    Science.gov (United States)

    Huš, Sebastjan; Kolar, Mitja; Krajnc, Peter

    2016-03-11

    Removal of silver, lead and cadmium ions from both model solutions and real contaminated water was achieved, in a flow through manner, by using highly porous functionalized poly(glycidyl methacrylate) materials, prepared by the polymerisation of high internal phase emulsions (polyHIPE), with significant sorption differences between metals allowing for selective removal. PolyHIPEs, initially prepared from glycidyl methacrylate as a functional monomer, were functionalized with pentaerythritol tetrakis(3-mercaptopropionate), 1,9-nonanedithiol and 2-aminobenzenethiol via the epoxy ring opening on the polymer supports and applied in a flow-through manner via encasements into dedicated disk holders. Capacity of 21.7mg Ag per gram of polymer was found for 1,9-nonanedithiol functionalized polymers, while the capacity was decreasing with the decreasing ionic radius of the metal; the dynamics of sorption also depended on metal ion size and furthermore on the thiol used for the polymer functionalization.

  13. The physiology of extremes: Ancel Keys and the International High Altitude Expedition of 1935.

    Science.gov (United States)

    Tracy, Sarah W

    2012-01-01

    This article examines the International High Altitude Expedition of 1935 and its significance in the life and science of Ancel Keys. Both the expedition and Keys's story afford excellent opportunities to explore the growing reach of interwar physiology into extreme climates-whether built or natural. As IHAE scientists assessed human performance and adaptation to hypoxia, low barometric pressure, and cold, they not only illuminated the physiological and psychological processes of high altitude acclimatization, but they also drew borderlines between the normal and the pathological, paved the way for the neocolonial exploitation of natural and human resources in Latin America, and pioneered field methods in physiology that were adapted and adopted by the Allied Forces during the Second World War. This case study in the physiology of place reveals the power and persistence of environmental determinism within biomedicine well into the twentieth century.

  14. 8th International Workshop on Parallel Tools for High Performance Computing

    CERN Document Server

    Gracia, José; Knüpfer, Andreas; Resch, Michael; Nagel, Wolfgang

    2015-01-01

    Numerical simulation and modelling using High Performance Computing has evolved into an established technique in academic and industrial research. At the same time, the High Performance Computing infrastructure is becoming ever more complex. For instance, most of the current top systems around the world use thousands of nodes in which classical CPUs are combined with accelerator cards in order to enhance their compute power and energy efficiency. This complexity can only be mastered with adequate development and optimization tools. Key topics addressed by these tools include parallelization on heterogeneous systems, performance optimization for CPUs and accelerators, debugging of increasingly complex scientific applications, and optimization of energy usage in the spirit of green IT. This book represents the proceedings of the 8th International Parallel Tools Workshop, held October 1-2, 2014 in Stuttgart, Germany – which is a forum to discuss the latest advancements in the parallel tools.

  15. Proceedings of the 1st International Workshop on High-Speed and Intercity Railways

    CERN Document Server

    Ye, Xiao-Wei

    2012-01-01

    This book contains the papers included in the proceedings of the 1st International Workshop on High-speed and Intercity Railways (IWHIR 2011) held in Shenzhen and Hong Kong, China from July 19 to July 22, 2011, which is organized by The Hong Kong Polytechnic University, in collaboration with Southwest Jiaotong University, Beijing Jiaotong University, Dalian Jiaotong University, China Engineering Consultants, Inc., Zhejiang University, and Tsinghua University. Continuing the great initiatives and momentums of the rapid development in high-speed and intercity railways worldwide in recent years, IWHIR 2011 aims at providing a platform for academic scholars and practicing engineers to share knowledge and experience, to promote collaboration, and to strengthen R&D activities related to railway engineering. Engineers, scientists, professors, and students from universities, research institutes, and related industrial companies have been cordially invited to participate in the workshop. These papers have covered ...

  16. 10th International Workshop on Parallel Tools for High Performance Computing

    CERN Document Server

    Gracia, José; Hilbrich, Tobias; Knüpfer, Andreas; Resch, Michael; Nagel, Wolfgang

    2017-01-01

    This book presents the proceedings of the 10th International Parallel Tools Workshop, held October 4-5, 2016 in Stuttgart, Germany – a forum to discuss the latest advances in parallel tools. High-performance computing plays an increasingly important role for numerical simulation and modelling in academic and industrial research. At the same time, using large-scale parallel systems efficiently is becoming more difficult. A number of tools addressing parallel program development and analysis have emerged from the high-performance computing community over the last decade, and what may have started as collection of small helper script has now matured to production-grade frameworks. Powerful user interfaces and an extensive body of documentation allow easy usage by non-specialists.

  17. Proceedings of the 1st International Workshop on High-Speed and Intercity Railways

    CERN Document Server

    Ye, Xiao-Wei

    2012-01-01

    This book contains the papers included in the proceedings of the 1st International Workshop on High-speed and Intercity Railways (IWHIR 2011) held in Shenzhen and Hong Kong, China from July 19 to July 22, 2011, which is organized by The Hong Kong Polytechnic University, in collaboration with Southwest Jiaotong University, Beijing Jiaotong University, Dalian Jiaotong University, China Engineering Consultants, Inc., Zhejiang University, and Tsinghua University. Continuing the great initiatives and momentums of the rapid development in high-speed and intercity railways worldwide in recent years, IWHIR 2011 aims at providing a platform for academic scholars and practicing engineers to share knowledge and experience, to promote collaboration, and to strengthen R&D activities related to railway engineering. Engineers, scientists, professors, and students from universities, research institutes, and related industrial companies have been cordially invited to participate in the workshop. These papers have covered ...

  18. Development of Product System of International Tourist Culture Demonstration Zone in South Anhui%皖南国际旅游文化示范区产品体系开发

    Institute of Scientific and Technical Information of China (English)

    章尚正; 周伟伟; 朱莲

    2012-01-01

    The top priority of "Twelfth Five-year Plan for Anhui tourism" is to promote the construction of "International Tourist Culture Demonstration Zone in South Anhui", while development of product system is the elementary work for the construction of demonstration zone. South Anhui is one of the richest tourist resources in China, so the current work should be focused on development of tourist products hierar- chically and in series, that is, we need to integrate the rich and first-class tourist resources in the zone and develop the international tourist products in series, and we should form the product system made up of leading products, core products, special products, new products as quickly as possible. Based on the Hui Culture, the paper also explores the product strategy, environment support, sales strategy and government guidance in internalization of tourist products.%安徽旅游业“十二五”重中之重是推进“皖南国际旅游文化示范区’’建设,而产品体系开发是皖南示范区建设的基础工程。皖南是我国旅游资源最丰富的地区之一,应该分层次、系列化地开发旅游文化产品体系,即整合区域内丰富多样的高品位旅游资源,开发成系列化、层级化、国际化的旅游产品,尽快形成由龙头产品、核心产品、特色产品、新型产品等组成的产品体系。

  19. PREFACE: 8th International Conference on the Physics of Highly Charged Ions (HCI-96)

    Science.gov (United States)

    Awaya, Yohko; Kambara, Tadashi

    1997-01-01

    These proceedings contain the papers presented at the Eighth International Conference on the Physics of Highly Charged Ions (HCI-96) which was held on September 23-26, 1996 in Omiya, Saitama, Japan, hosted by the Institute of Physical and Chemical Research (RIKEN). The first conference of this series was held in Stockholm, Sweden in 1982. The subject was the "Production and Physics of Highly Charged Ions". The conference has since been held every other year; in Oxford, UK (1984), Groningen, the Netherlands (1986), Grenoble, France (1988), Giessen, Germany (1990), Manhattan, Kansas, USA (1992) and Vienna, Austria (1994). When the first conference of this series was held, various highly charged ions were available from many heavy ion accelerators, which had been constructed since the 1960's, and ion sources such as EBIS and ECRIS, which were then new facilities. Subsequently, many other experimental techniques have been developed to study or to control highly charged ions, such as ion traps, EBIT's, storage rings, high-brilliance synchrotron radiation, and so forth. Now the properties of highly charged ions themselves and their interactions with various kinds of materials can be studied systematically using ions of any element at various collision energies. These studies will result in a deeper insight into their nature as well as giving us important basic data for use in the fields closely related to atomic physics. About 190 scientists from 18 countries registered at the HCI-96. The number of invited talks was 21 and that of contrib- uted papers 215. In these proceedings, 20 papers of invited talks and 116 papers on contributions are included. They are classified into categories of "Structure and Spectroscopy of Highly Charged Ions and Fundamental Aspects", "Highly Charged Ions in Plasmas and Strong Fields", "Interactions of Highly Charged Ions with Atoms and Ions", "Dynamic Processes Related to Molecules and Clusters", "Interactions of Highly Charged Ions with

  20. An easily regenerable enzyme reactor prepared from polymerized high internal phase emulsions

    Energy Technology Data Exchange (ETDEWEB)

    Ruan, Guihua, E-mail: guihuaruan@hotmail.com [Guangxi Key Laboratory of Electrochemical and Magnetochemical Functional Materials, College of Chemistry and Bioengineering, Guilin University of Technology, Guangxi 541004 (China); Guangxi Collaborative Innovation Center for Water Pollution Control and Water Safety in Karst Area, Guilin University of Technology, Guilin 541004 (China); Wu, Zhenwei; Huang, Yipeng; Wei, Meiping; Su, Rihui [Guangxi Key Laboratory of Electrochemical and Magnetochemical Functional Materials, College of Chemistry and Bioengineering, Guilin University of Technology, Guangxi 541004 (China); Du, Fuyou, E-mail: dufu2005@126.com [Guangxi Key Laboratory of Electrochemical and Magnetochemical Functional Materials, College of Chemistry and Bioengineering, Guilin University of Technology, Guangxi 541004 (China); Guangxi Collaborative Innovation Center for Water Pollution Control and Water Safety in Karst Area, Guilin University of Technology, Guilin 541004 (China)

    2016-04-22

    A large-scale high-efficient enzyme reactor based on polymerized high internal phase emulsion monolith (polyHIPE) was prepared. First, a porous cross-linked polyHIPE monolith was prepared by in-situ thermal polymerization of a high internal phase emulsion containing styrene, divinylbenzene and polyglutaraldehyde. The enzyme of TPCK-Trypsin was then immobilized on the monolithic polyHIPE. The performance of the resultant enzyme reactor was assessed according to the conversion ability of N{sub α}-benzoyl-L-arginine ethyl ester to N{sub α}-benzoyl-L-arginine, and the protein digestibility of bovine serum albumin (BSA) and cytochrome (Cyt-C). The results showed that the prepared enzyme reactor exhibited high enzyme immobilization efficiency and fast and easy-control protein digestibility. BSA and Cyt-C could be digested in 10 min with sequence coverage of 59% and 78%, respectively. The peptides and residual protein could be easily rinsed out from reactor and the reactor could be regenerated easily with 4 M HCl without any structure destruction. Properties of multiple interconnected chambers with good permeability, fast digestion facility and easily reproducibility indicated that the polyHIPE enzyme reactor was a good selector potentially applied in proteomics and catalysis areas. - Graphical abstract: Schematic illustration of preparation of hypercrosslinking polyHIPE immobilized enzyme reactor for on-column protein digestion. - Highlights: • A reactor was prepared and used for enzyme immobilization and continuous on-column protein digestion. • The new polyHIPE IMER was quite suit for protein digestion with good properties. • On-column digestion revealed that the IMER was easy regenerated by HCl without any structure destruction.

  1. Human exposure to unconventional natural gas development: A public health demonstration of periodic high exposure to chemical mixtures in ambient air.

    Science.gov (United States)

    Brown, David R; Lewis, Celia; Weinberger, Beth I

    2015-01-01

    Directional drilling and hydraulic fracturing of shale gas and oil bring industrial activity into close proximity to residences, schools, daycare centers and places where people spend their time. Multiple gas production sources can be sited near residences. Health care providers evaluating patient health need to know the chemicals present, the emissions from different sites and the intensity and frequency of the exposures. This research describes a hypothetical case study designed to provide a basic model that demonstrates the direct effect of weather on exposure patterns of particulate matter smaller than 2.5 microns (PM2.5) and volatile organic chemicals (VOCs). Because emissions from unconventional natural gas development (UNGD) sites are variable, a short term exposure profile is proposed that determines 6-hour assessments of emissions estimates, a time scale needed to assist physicians in the evaluation of individual exposures. The hypothetical case is based on observed conditions in shale gas development in Washington County, Pennsylvania, and on estimated emissions from facilities during gas development and production. An air exposure screening model was applied to determine the ambient concentration of VOCs and PM2.5 at different 6-hour periods of the day and night. Hourly wind speed, wind direction and cloud cover data from Pittsburgh International Airport were used to calculate the expected exposures. Fourteen months of daily observations were modeled. Higher than yearly average source terms were used to predict health impacts at periods when emissions are high. The frequency and intensity of exposures to PM2.5 and VOCs at a residence surrounded by three UNGD facilities was determined. The findings show that peak PM2.5 and VOC exposures occurred 83 times over the course of 14 months of well development. Among the stages of well development, the drilling, flaring and finishing, and gas production stages produced higher intensity exposures than the

  2. SCinet Architecture: Featured at the International Conference for High Performance Computing,Networking, Storage and Analysis 2016

    Energy Technology Data Exchange (ETDEWEB)

    Lyonnais, Marc; Smith, Matt; Mace, Kate, P

    2017-02-06

    SCinet is the purpose-built network that operates during the International Conference for High Performance Computing,Networking, Storage and Analysis (Super Computing or SC). Created each year for the conference, SCinet brings to life a high-capacity network that supports applications and experiments that are a hallmark of the SC conference. The network links the convention center to research and commercial networks around the world. This resource serves as a platform for exhibitors to demonstrate the advanced computing resources of their home institutions and elsewhere by supporting a wide variety of applications. Volunteers from academia, government and industry work together to design and deliver the SCinet infrastructure. Industry vendors and carriers donate millions of dollars in equipment and services needed to build and support the local and wide area networks. Planning begins more than a year in advance of each SC conference and culminates in a high intensity installation in the days leading up to the conference. The SCinet architecture for SC16 illustrates a dramatic increase in participation from the vendor community, particularly those that focus on network equipment. Software-Defined Networking (SDN) and Data Center Networking (DCN) are present in nearly all aspects of the design.

  3. Experimental Demonstration of Ideal Noise Shaping in Resonant Tunneling Delta-Sigma Modulator for High Resolution, Wide Band Analog-to-Digital Converters

    Science.gov (United States)

    Maezawa, Koichi; Sakou, Mario; Matsubara, Wataru; Mizutani, Takashi; Matsuzaki, Hideaki

    2006-04-01

    A ΔΣ modulator using a frequency modulation intermediate signal was demonstrated using a resonant tunneling logic gate called a monostable bistable transition logic element (MOBILE). This ΔΣ modulator is based on the nature of an FM signal and suitable for high-speed operation. Experiments using an InP-based MOBILE demonstrate good noise shaping characteristics. Moreover, the operation with a higher FM carrier frequency than the sampling frequency was demonstrated, showing equally good noise shaping performance. This makes the design of the voltage-controlled oscillator, which is a key component of the FM ΔΣ modulator, much easier. Consequently, an FM ΔΣ modulator using MOBILE is promising for high-resolution, wide-band analog-to-digital converters (ADCs).

  4. Complete Maps for the Internal Oxidation of Ideal Ternary Alloys Forming Insoluble Oxides under High Oxidant Pressures

    Institute of Scientific and Technical Information of China (English)

    F.GESMUNDO; S.WANG; Y.NIU

    2009-01-01

    This paper presents an analysis of the conditions of stability of the different forms of internal oxidation of ideal ternary A-B-C alloys, where A is the most noble and C the most reactive component, forming insoluble oxide and exposed to high pressures of a single oxidant. The treatment, based on an extension to ternary alloys of Wagner's criterion for the transition from internal to external oxidation in binary alloys, allows to predict the existence of three different forms of internal oxidation. In fact, in addition to the most common kinds of internal attack, involving the coupled internal oxidation of B+C beneath external AO scales and the internal oxidation of C beneath external BO scales, a third mode, involving the internal oxidation of C beneath external scales composed of mixtures of AO+BO, becomes also possible under special conditions. A combination of the boundary conditions for the existence of these different types of internal oxidation allows to predict three different kinds of complete maps for the internal oxidation in these systems, one of which involves only two modes, while the other two involve all the three possible modes of internal oxidation.

  5. International Olympic Committee consensus statement on thermoregulatory and altitude challenges for high-level athletes.

    Science.gov (United States)

    Bergeron, M F; Bahr, R; Bärtsch, P; Bourdon, L; Calbet, J A L; Carlsen, K H; Castagna, O; González-Alonso, J; Lundby, C; Maughan, R J; Millet, G; Mountjoy, M; Racinais, S; Rasmussen, P; Singh, D G; Subudhi, A W; Young, A J; Soligard, T; Engebretsen, L

    2012-09-01

    Challenging environmental conditions, including heat and humidity, cold, and altitude, pose particular risks to the health of Olympic and other high-level athletes. As a further commitment to athlete safety, the International Olympic Committee (IOC) Medical Commission convened a panel of experts to review the scientific evidence base, reach consensus, and underscore practical safety guidelines and new research priorities regarding the unique environmental challenges Olympic and other international-level athletes face. For non-aquatic events, external thermal load is dependent on ambient temperature, humidity, wind speed and solar radiation, while clothing and protective gear can measurably increase thermal strain and prompt premature fatigue. In swimmers, body heat loss is the direct result of convection at a rate that is proportional to the effective water velocity around the swimmer and the temperature difference between the skin and the water. Other cold exposure and conditions, such as during Alpine skiing, biathlon and other sliding sports, facilitate body heat transfer to the environment, potentially leading to hypothermia and/or frostbite; although metabolic heat production during these activities usually increases well above the rate of body heat loss, and protective clothing and limited exposure time in certain events reduces these clinical risks as well. Most athletic events are held at altitudes that pose little to no health risks; and training exposures are typically brief and well-tolerated. While these and other environment-related threats to performance and safety can be lessened or averted by implementing a variety of individual and event preventative measures, more research and evidence-based guidelines and recommendations are needed. In the mean time, the IOC Medical Commission and International Sport Federations have implemented new guidelines and taken additional steps to mitigate risk even further.

  6. HEGEMONY OF INTERNATIONAL STANDARD EDUCATION AT PUBLIC SENIOR HIGH SCHOOL 78 JAKARTA

    Directory of Open Access Journals (Sweden)

    Tuntun Sinaga

    2014-06-01

    Full Text Available The Act Number 20 of 2003 concerning System of National instructed that international standard education unit be opened in every regency/city in every part of Indonesia as an attempt made to anticipate the globalized era. This study was intended to understand the forms of hegemony of PBI and the factors contributing to it at Public Senior High School 78 Jakarta. In the present study, the Theory of Hegemony, the Theory of Discourse of Power/Knowledge, and the Theory of Social Practice were eclectically used with qualitative approach. The data were taken from documents, brochures, mass media, experts in education, community leaders, teachers, students, parents and the headmaster. The data were taken through interview, observation and documentary study. The data were validated through the process of triangulation which includes data reduction, data presentation, data verification, and interpretation.  The result of the study showed that (1 the hegemony of PBI took place in the forms of the standardization of education, the capitalization of education, the image of international quality, the stratification of education and (2 the factors contributing to the hegemony of PBI were the politics of national education and the discourse of globalism. Hegemony took place in the form of internationalization of eight SNP and “benchmarking” of the quality of education in OECD countries in order to anticipate globalization. It is suggested that the general middle education which reflected the philosophy of national education, Pancasila, need to be reconstructed.

  7. High-latitude ion temperature climatology during the International Polar Year 2007–2008

    Directory of Open Access Journals (Sweden)

    Yamazaki Y.

    2016-01-01

    Full Text Available This article presents the results of an ion temperature climatology study that examined ionospheric measurements from the European Incoherent SCATter (EISCAT Svalbard Radar (ESR: 78.2° N, 16.0° E and the Poker Flat Incoherent Scatter Radar (PFISR: 65.1° N, 212.6° E during the year-long campaign of the International Polar Year (IPY from March 2007 to February 2008. These observations were compared with those of the Thermosphere Ionosphere Electrodynamics General Circulation Model (TIE-GCM, as well as the International Reference Ionosphere 2012 (IRI-2012. Fairly close agreement was found between the observations and TIE-GCM results. Numerical experiments revealed that the daily variation in the high-latitude ion temperature, about 100–200 K, is mainly due to ion frictional heating. The ion temperature was found to increase in response to elevated geomagnetic activity at both ESR and PFISR, which is consistent with the findings of previous studies. At ESR, a strong response occurred during the daytime, which was interpreted as a result of dayside-cusp heating. Neither TIE-GCM nor IRI-2012 reproduced the strong geomagnetic activity response at ESR, underscoring the need for improvement in both models at polar latitudes.

  8. High cell density cultures produced by internal retention: application in continuous ethanol fermentation

    Directory of Open Access Journals (Sweden)

    Berta Carola Pérez

    2007-04-01

    Full Text Available Ethanol has provoked great interest due to its potential as an alternative fuel. Nevertheless, fermentation processes must be developed by increasing the low volumetric productivity achieved in conventional cultures (batch or continuous to make this product become economically competitive. This can be achieved by using techniques leading to high cell concentration and reducing inhibition by the end-product. One of the frequently employed methods involves cell recycling. This work thus developed a membrane reactor incorporating a filtration module with 5 u,m stainless steel tubular units inside a 3L stirred jar fermenter for investigating its application in continuous ethanol production. The effects of cell concentration and transmembrane pressure difference on permeate flux were evaluated for testing the filtration module's performance. The internal cell retention system was operated in Saccharomyces cerevisiae continuous culture derived from sucrose, once fermentation conditions had been selected (30 °C, 1.25 -1.75 vvm, pH 4.5. Filter unit permeability was maintained by applying pulses of air. More than 97% of the grown cells were retained in the fermenter, reaching 51 g/L cell concentration and 8.51 g/L.h average ethanol productivity in culture with internal cell retention; this was twice that obtained in a conventional continuous culture. Key words: Membrane reactor, Saccharomyces cerevisiae, alcoholic fermentation, cell recycling.

  9. An Internal ALD-Based High Voltage Divider and Signal Circuit for MCP-based Photodetectors

    Energy Technology Data Exchange (ETDEWEB)

    Adams, Bernhard W.; Elagin, Andrey; Elam, Jeffrey W.; Frisch, Henry J.; Genat, Jean-Francois; Gregar, Joseph S.; Mane, Anil U.; Minot, Michael J.; Northrup, Richard; Obaid, Razib; Oberla, Eric; Alexander, Vostrikov; Wetstein, Matthew

    2015-04-21

    We describe a pin-less design for the high voltage (HV) resistive divider of the all-glass LAPPD (TM) 8 in,square thin photodetector module. The divider, which distributes high voltage applied to the photocathode to the two micro-channel plates (MCPs) that constitute the amplification stage, is comprised of the two MCPs and three glass mechanical spacers, each of which is coated with a resistive layer using atomic layer deposition (ALD). The three glass grid spacers and the two MCPs form a continuous resistive path between cathode and anode, with the voltages across the MCPs and the spacers determined by the resistance of each. High voltage is applied on an external tab on the top glass window that connects to the photocathode through the metal seal. The DC ground is supplied by microstrips on the bottom glass plate that form the high-bandwidth anode. The microstrips exit the package through the glass-frit seal of the anode base-plate and the package sidewall. The divider is thus completely internal, with no HV pins penetrating the low-profile flat glass package. Measurements of the performance of the divider are presented for the 8 in.-square MCP and spacer package in a custom test fixture and for an assembled externally pumped LAPPD (TM) prototype with an aluminum photocathode. (C) 2015 Elsevier B.V. All rights reserved.

  10. Kinetics and Catalysis Demonstrations.

    Science.gov (United States)

    Falconer, John L.; Britten, Jerald A.

    1984-01-01

    Eleven videotaped kinetics and catalysis demonstrations are described. Demonstrations include the clock reaction, oscillating reaction, hydrogen oxidation in air, hydrogen-oxygen explosion, acid-base properties of solids, high- and low-temperature zeolite reactivity, copper catalysis of ammonia oxidation and sodium peroxide decomposition, ammonia…

  11. Molecular cloning, expression and immunological characterisation of Lol p 5C, a novel allergen isoform of rye grass pollen demonstrating high IgE reactivity.

    Science.gov (United States)

    Suphioglu, C; Mawdsley, D; Schäppi, G; Gruehn, S; de Leon, M; Rolland, J M; O'Hehir, R E

    1999-12-03

    A novel isoform of a major rye grass pollen allergen Lol p 5 was isolated from a cDNA expression library. The new isoform, Lol p 5C, shares 95% amino acid sequence identity with Lol p 5A. Both isoforms demonstrated shared antigenic activity but different allergenic activities. Recombinant Lol p 5C demonstrated 100% IgE reactivity in 22 rye grass pollen sensitive patients. In comparison, recombinant Lol p 5A showed IgE reactivity in less than 64% of the patients. Therefore, Lol p 5C represents a novel and highly IgE-reactive isoform allergen of rye grass pollen.

  12. Generation of high-fidelity four-photon cluster state and quantum-domain demonstration of one-way quantum computing.

    Science.gov (United States)

    Tokunaga, Yuuki; Kuwashiro, Shin; Yamamoto, Takashi; Koashi, Masato; Imoto, Nobuyuki

    2008-05-30

    We experimentally demonstrate a simple scheme for generating a four-photon entangled cluster state with fidelity over 0.860+/-0.015. We show that the fidelity is high enough to guarantee that the produced state is distinguished from Greenberger-Horne-Zeilinger, W, and Dicke types of genuine four-qubit entanglement. We also demonstrate basic operations of one-way quantum computing using the produced state and show that the output state fidelities surpass classical bounds, which indicates that the entanglement in the produced state essentially contributes to the quantum operation.

  13. CAD/CAM/CAI Application for High-Precision Machining of Internal Combustion Engine Pistons

    Directory of Open Access Journals (Sweden)

    V. V. Postnov

    2014-07-01

    Full Text Available CAD/CAM/CAI application solutions for internal combustion engine pistons machining was analyzed. Low-volume technology of internal combustion engine pistons production was proposed. Fixture for CNC turning center was designed.

  14. 9th International Workshop on Parallel Tools for High Performance Computing

    CERN Document Server

    Hilbrich, Tobias; Niethammer, Christoph; Gracia, José; Nagel, Wolfgang; Resch, Michael

    2016-01-01

    High Performance Computing (HPC) remains a driver that offers huge potentials and benefits for science and society. However, a profound understanding of the computational matters and specialized software is needed to arrive at effective and efficient simulations. Dedicated software tools are important parts of the HPC software landscape, and support application developers. Even though a tool is by definition not a part of an application, but rather a supplemental piece of software, it can make a fundamental difference during the development of an application. Such tools aid application developers in the context of debugging, performance analysis, and code optimization, and therefore make a major contribution to the development of robust and efficient parallel software. This book introduces a selection of the tools presented and discussed at the 9th International Parallel Tools Workshop held in Dresden, Germany, September 2-3, 2015, which offered an established forum for discussing the latest advances in paral...

  15. De-internationalization of small high technology firms: An international entrepreneurship perspective

    DEFF Research Database (Denmark)

    Turcan, Romeo V.

    whether de-internationalisation could be viewed as (i) an entrepreneurial activity; and/or (ii) an integral part of a small high-technology firms’ growth process. Driven by the nature of the research questions, a multiple-case study methodology was adopted for the purpose of theory building. Five firms...... were selected and located on the basis of theoretical and snow-ball sampling strategies. To explore companies’ critical events and episodes, the method of critical incident technique was employed. In total, 24 semi-structured in-depth interviews were conducted with company directors...... by reduction was employed extensively to advance middle-range theories. The study contributes to (i) international business research by developing a process model of de-internationalisation and defining its constructs; (ii) entrepreneurship research by redefining the entrepreneurial orientation construct...

  16. Report of feasibility study on international-cooperation in high efficient energy conversion technology

    Science.gov (United States)

    1993-03-01

    With regard to accelerated introduction of high efficient energy conversion technology to developing countries, the paper investigates the countries' thoughts of the introduction of the technology and the status of the introduction bases. The countries for survey are the Philippines, Indonesia, Malaysia and Thailand. The Philippine government expects to develop cogeneration as well as large power sources and to widen effective use of natural energy. In Indonesia, they largely expect effective use of biomass energy using Stirling engines by international cooperation and the promoted local electrification using standalone distributed fuel cells. In Malaysia, they have great expectations of the introduction of air conditioning facilities using Stirling engines and the use of standalone distributed fuel cells for promotion of local electrification. Thailand hopes for the use of Stirling engines to air conditioning systems, and the development of solar Stirling generators with solar energy as a heat source and electric vehicles.

  17. Stability of tokamak plasmas with internal transport barriers against high n ideal magnetohydrodynamic ballooning mode

    Institute of Scientific and Technical Information of China (English)

    Shi Bing-Ren; Qu Wen-Xiao

    2006-01-01

    A ballooning mode equation for tokamak plasma, with the toroidicity and the Shafranov shift effects included, is derived for a shift circular flux tokamak configuration. Using this equation, the stability of the plasma configuration with an internal transport barrier (IT2 against the high n (the toroidal mode number) ideal magnetohydrodynamic (MHD) ballooning mode is analysed. It is shown that both the toroidicity and the Shafranov shift effects are stabilizing.In the ITB region, these effects give rise to a low shear stable channel between the first and the second stability regions.Out of the ITB region towards the plasma edge, the stabilizing effect of the Shafranov shift causes the unstable zone to be significantly narrowed.

  18. International program to study subseabed disposal of high-level radioactive wastes

    Energy Technology Data Exchange (ETDEWEB)

    Carlin, E.M.; Hinga, K.R.; Knauss, J.A.

    1984-01-01

    This report provides an overview of the international program to study seabed disposal of nuclear wastes. Its purpose is to inform legislators, other policy makers, and the general public as to the history of the program, technological requirements necessary for feasibility assessment, legal questions involved, international coordination of research, national policies, and research and development activities. Each of these major aspects of the program is presented in a separate section. The objective of seabed burial, similar to its continental counterparts, is to contain and to isolate the wastes. The subseabed option should not be confuesed with past practices of ocean dumping which have introduced wastes into ocean waters. Seabed disposal refers to the emplacement of solidified high-level radioactive waste (with or without reprocessing) in certain geologically stable sediments of the deep ocean floor. Specially designed surface ships would transport waste canisters from a port facility to the disposal site. Canisters would be buried from a few tens to a few hundreds of meters below the surface of ocean bottom sediments, and hence would not be in contact with the overlying ocean water. The concept is a multi-barrier approach for disposal. Barriers, including waste form, canister, ad deep ocean sediments, will separate wastes from the ocean environment. High-level wastes (HLW) would be stabilized by conversion into a leach-resistant solid form such as glass. This solid would be placed inside a metallic canister or other type of package which represents a second barrier. The deep ocean sediments, a third barrier, are discussed in the Feasibility Assessment section. The waste form and canister would provide a barrier for several hundred years, and the sediments would be relied upon as a barrier for thousands of years. 62 references, 3 figures, 2 tables.

  19. Joint Antarctic School Expedition - An International Collaboration for High School Students and Teachers on Antarctic Science

    Science.gov (United States)

    Botella, J.; Warburton, J.; Bartholow, S.; Reed, L. F.

    2014-12-01

    The Joint Antarctic School Expedition (JASE) is an international collaboration program between high school students and teachers from the United States and Chile aimed at providing the skills required for establishing the scientific international collaborations that our globalized world demands, and to develop a new approach for science education. The National Antarctic Programs of Chile and the United States worked together on a pilot program that brought high school students and teachers from both countries to Punta Arenas, Chile, in February 2014. The goals of this project included strengthening the partnership between the two countries, and building relationships between future generations of scientists, while developing the students' awareness of global scientific issues and expanding their knowledge and interest in Antarctica and polar science. A big component of the project involved the sharing by students of the acquired knowledge and experiences with the general public. JASE is based on the successful Chilean Antarctic Science Fair developed by Chile´s Antarctic Research Institute. For 10 years, small groups of Chilean students, each mentored by a teacher, perform experimental or bibliographical Antarctic research. Winning teams are awarded an expedition to the Chilean research station on King George Island. In 2014, the Chileans invited US participation in this program in order to strengthen science ties for upcoming generations. On King George Island, students have hands-on experiences conducting experiments and learning about field research. While the total number of students directly involved in the program is relatively small, the sharing of the experience by students with the general public is a novel approach to science education. Research experiences for students, like JASE, are important as they influence new direction for students in science learning, science interest, and help increase science knowledge. We will share experiences with the

  20. International distance education and the transition from ISDN to high-bandwidth Internet connectivity.

    Science.gov (United States)

    Vincent, Dale S; Berg, Benjamin W; Chitpatima, Suwicha; Hudson, Donald

    2002-12-01

    The Thailand Hawaii Assessment of Interactive Healthcare Initiative (THAI-HI) is an international distance-education project between two teaching hospitals in Honolulu and Bangkok that uses videoconferencing over three ISDN lines. A 'morning report' format is used to discuss clinical cases primarily covering infectious disease and critical-care topics. An audience response system is used at both sites to add interactivity. From July 2001 to May 2002, 816 health-care providers attended 20 clinical conferences. Audiences rated the conferences as highly relevant and as having high training value. Since the ISDN connection is expensive, we plan to convert the telecommunications to a high-bandwidth Internet connection. The Honolulu site will use a 45 Mbit/s commercial connection to the Hawaii Intranetwork Consortium, which links to the Abilene Network on the US mainland. The Bangkok hospital will use a 155 Mbit/s wireless optical connection to UNINET Thailand, which has a 45 Mbit/s circuit to Abilene.

  1. High rate nitrogen removal by ANAMMOX internal circulation reactor (IC) for old landfill leachate treatment.

    Science.gov (United States)

    Phan, The Nhat; Van Truong, Thi Thanh; Ha, Nhu Biec; Nguyen, Phuoc Dan; Bui, Xuan Thanh; Dang, Bao Trong; Doan, Van Tuan; Park, Joonhong; Guo, Wenshan; Ngo, Huu Hao

    2017-06-01

    This study aimed to evaluate the performance of a high rate nitrogen removal lab-scale ANAMMOX reactor, namely Internal Circulation (IC) reactor, for old landfill leachate treatment. The reactor was operated with pre-treated leachate from a pilot Partial Nitritation Reactor (PNR) using a high nitrogen loading rate ranging from 2 to 10kgNm(-3)d(-1). High rate removal of nitrogen (9.52±1.11kgNm(-3)d(-1)) was observed at an influent nitrogen concentration of 1500mgNL(-1). The specific ANAMMOX activity was found to be 0.598±0.026gN2-NgVSS(-1)d(-1). Analysis of ANAMMOX granules suggested that 0.5-1.0mm size granular sludge was the dominant group. The results of DNA analysis revealed that Candidatus Kueneniastuttgartiensis was the dominant species (37.45%) in the IC reactor, whereas other species like uncultured Bacteroidetes bacterium only constituted 5.37% in the system, but they were still responsible for removing recalcitrant organic matter.

  2. Experimental demonstration of high spectral-efficiency transmission with a novel non-interferometric vector modulator and custom DSP algorithms for coherent PON architectures

    Science.gov (United States)

    Lazarou, I.; Spatharakis, C.; Katopodis, V.; Dris, S.; Bakopoulos, P.; Schrenk, B.; Avramopoulos, H.

    2013-12-01

    We demonstrate a flexible multi-format vector modulator for coherent passive optical network (PON) architectures based on a non-interferometric cascade of a Semiconductor Optical Amplifier (SOA) and an Electro-Absorption Modulator (EAM) that exhibits increased simplicity and high energy-efficiency at low cost. 12- and 16- Quadrature Amplitude Modulation (QAM) constellations are generated, achieving modulation efficiencies of 3.6 and 4 bits/symbol respectively. The presented results demonstrate successful transmission over 25 km of fiber below the Forward Error Correction (FEC) limit, with sufficient compatible loss-budgets, making the proposed modulator concept an attractive candidate for urban network deployments, where high user density demands spectrally efficient formats. In addition, we describe the operation principle of the proposed modulator in detail and finally, the complete set of the digital signal processing (DSP) functionalities and algorithms that follow the standard coherent detection scheme is given, emphasizing on novel methods for QAM signal demodulation with uncommon constellation diagrams.

  3. Demonstration and Comparison Study for V- and W-Band Real-Time High-Definition Video Delivery in Diverse Fiber-Wireless Infrastructure

    DEFF Research Database (Denmark)

    Lebedev, Alexander; Vegas Olmos, Juan José; Pang, Xiaodan;

    2013-01-01

    This article experimentally demonstrates uncompressed high-definition video distribution in V-band (50–75 GHz) and W-band (75–110 GHz) fiber-wireless links achieving 3 m of wireless transmission in both cases. Access architecture is experimentally emulated by deploying single/multi-mode fibers......-band fiber-wireless systems is demonstrated with prospects to pave the way for application-focused fiber-wireless connectivity........ For the W-band, experimental assessment of passive and active approaches for implementation of remote antenna units is reported. The bit error rate performance of the optical and wireless channels is reported. A successful transmission of real-time uncompressed high-definition video in the V- and W...

  4. Fasciola hepatica demonstrates high levels of genetic diversity, a lack of population structure and high gene flow: possible implications for drug resistance.

    Science.gov (United States)

    Beesley, Nicola J; Williams, Diana J L; Paterson, Steve; Hodgkinson, Jane

    2017-01-01

    Fasciola hepatica, the liver fluke, is a trematode parasite of considerable economic importance to the livestock industry and is a re-emerging zoonosis that poses a risk to human health in F. hepatica-endemic areas worldwide. Drug resistance is a substantial threat to the current and future control of F. hepatica, yet little is known about how the biology of the parasite influences the development and spread of resistance. Given that F. hepatica can self-fertilise and therefore inbreed, there is the potential for greater population differentiation and an increased likelihood of recessive alleles, such as drug resistance genes, coming together. This could be compounded by clonal expansion within the snail intermediate host and aggregation of parasites of the same genotype on pasture. Alternatively, widespread movement of animals that typically occurs in the UK could promote high levels of gene flow and prevent population differentiation. We identified clonal parasites with identical multilocus genotypes in 61% of hosts. Despite this, 84% of 1579 adult parasites had unique multilocus genotypes, which supports high levels of genotypic diversity within F. hepatica populations. Our analyses indicate a selfing rate no greater than 2%, suggesting that this diversity is in part due to the propensity for F. hepatica to cross-fertilise. Finally, although we identified high genetic diversity within a given host, there was little evidence for differentiation between populations from different hosts, indicating a single panmictic population. This implies that, once those emerge, anthelmintic resistance genes have the potential to spread rapidly through liver fluke populations.

  5. PREFACE: International Conference on Computing in High Energy and Nuclear Physics (CHEP'09)

    Science.gov (United States)

    Gruntorad, Jan; Lokajicek, Milos

    2010-11-01

    The 17th International Conference on Computing in High Energy and Nuclear Physics (CHEP) was held on 21-27 March 2009 in Prague, Czech Republic. CHEP is a major series of international conferences for physicists and computing professionals from the worldwide High Energy and Nuclear Physics community, Computer Science, and Information Technology. The CHEP conference provides an international forum to exchange information on computing experience and needs for the community, and to review recent, ongoing and future activities. Recent conferences were held in Victoria, Canada 2007, Mumbai, India in 2006, Interlaken, Switzerland in 2004, San Diego, USA in 2003, Beijing, China in 2001, Padua, Italy in 2000. The CHEP'09 conference had 600 attendees with a program that included plenary sessions of invited oral presentations, a number of parallel sessions comprising 200 oral and 300 poster presentations, and an industrial exhibition. We thanks all the presenters, for the excellent scientific content of their contributions to the conference. Conference tracks covered topics on Online Computing, Event Processing, Software Components, Tools and Databases, Hardware and Computing Fabrics, Grid Middleware and Networking Technologies, Distributed Processing and Analysis and Collaborative Tools. The conference included excursions to Prague and other Czech cities and castles and a banquet held at the Zofin palace in Prague. The next CHEP conference will be held in Taipei, Taiwan on 18-22 October 2010. We would like thank the Ministry of Education Youth and Sports of the Czech Republic and the EU ACEOLE project for the conference support, further to commercial sponsors, the International Advisory Committee, the Local Organizing Committee members representing the five collaborating Czech institutions Jan Gruntorad (co-chair), CESNET, z.s.p.o., Prague Andrej Kugler, Nuclear Physics Institute AS CR v.v.i., Rez Rupert Leitner, Charles University in Prague, Faculty of Mathematics and

  6. Demonstration of an optimised focal field with long focal depth and high transmission obtained with the Extended Nijboer-Zernike theory.

    Science.gov (United States)

    Konijnenberg, A P; Wei, L; Kumar, N; Filho, L Couto Correa Pinto; Cisotto, L; Pereira, S F; Urbach, H P

    2014-01-13

    In several optical systems, a specific Point Spread Function (PSF) needs to be generated. This can be achieved by shaping the complex field at the pupil. The Extended Nijboer-Zernike (ENZ) theory relates complex Zernike modes on the pupil directly to functions in the focal region. In this paper, we introduce a method to engineer a PSF using the ENZ theory. In particular, we present an optimization algorithm to design an extended depth of focus with high lateral resolution, while keeping the transmission of light high (over 60%). We also have demonstrated three outcomes of the algorithm using a Spatial Light Modulator (SLM).

  7. Development of a high-value care subscore on the internal medicine in-training examination.

    Science.gov (United States)

    Ryskina, Kira L; Korenstein, Deborah; Weissman, Arlene; Masters, Philip; Alguire, Patrick; Smith, Cynthia D

    2014-11-18

    Although high-value care (HVC) that balances benefits of tests or treatments against potential harms and costs has been a recently emphasized competency for internal medicine (IM) residents, few tools to assess residents' knowledge of HVC are available. To describe the development and initial results of an HVC subscore of the Internal Medicine In-Training Examination (IM-ITE). The HVC concepts were introduced to IM-ITE authors during question development. Three physicians independently reviewed each examination question for selection in the HVC subscore according to 6 HVC principles. The final subscore was determined by consensus. Data from the IM-ITE administered in October 2012 were analyzed at the program level. U.S. IM residency programs. 362 U.S. IM residency programs with IM-ITE data for at least 10 residents. Program-level performance on the HVC subscore was compared with performance on the overall IM-ITE, the Dartmouth Atlas hospital care intensity (HCI) index of the program's primary training hospital, and residents' attitudes about HVC assessed with a voluntary survey. The HVC subscore comprised 38 questions, including 21 (55%) on managing conservatively when appropriate and 14 (37%) on identifying low-value care. Of the 362 U.S. IM programs in the sample, 41% were in a different quartile when ranked based on the HVC subscore compared with overall IM-ITE performance. Rankings by HVC subscore and HCI index were modestly inversely associated, with 30% of programs ranked in the same quartile based on both measures. Knowledge of HVC assessed from examination vignettes may not reflect practice of HVC. Although the HVC subscore has face validity and can contribute to evaluation of residents' HVC knowledge, additional tools are needed to accurately measure residents' proficiency in HVC. None.

  8. High Density Culture of Porphyridium cruentum in a 42 L Internal Airlift Loop Photobioreactor

    Institute of Scientific and Technical Information of China (English)

    王长海; 王逸云; 田志立

    2003-01-01

    The key limiting factors to high-density culture of Porphyridium cruentum are the uptake of light energy and nutrient by the microalgal cells. Under the optimal conditions of carrier culture, both cell mass and cell density were increased significantly up to 5.2 g/L (DW) and 5.2×107/ml. Furthermore,the effects of the liquid circulation velocity, light intensity and initial cell density on cell mass productivity of P. cruentum were investigated in a 42 L internal loop airlift photobioreactor. Although the light intensity was as low as 100 μmol/(m2@s), the light damage or the photoinhibition phenomenon was observed under the culture condition of low initial cell mass (0.10 g/L, DW) and high liquid circulation velocity (0.30 m/s). However, a higher cell growth rate and a high cell mass productivity were achieved with the same conditions only at high initial cell mass (about 0.80 g/L, DW). Under the optimal conditions, the cell specific growth rate, cell mass volumetric and areal output rate reached to 0.95 d-1,0.80 g/(L@d) and 42.5 g/(m2@d) respectively. Finally, a method of nutrient feeding and gradual increase of light intensity in different cultural stages was developed, which further improved the cell mass, cell mass volumetric and areal output rate to 5.9 g/L, 1.2 g/(L@d) and 61.7 g/(m2@d) respectively.

  9. Criteria for internal auditing.

    Science.gov (United States)

    Holder, W W; Clay, R J

    1979-01-01

    An effective, inclusive internal auditing endeavor should help assure hospital managements that (1) an adequate system of internal control exists to assure the safeguarding of assets and the reliability of data produced by the financial information system, (2) uneconomic operating practices are detected promptly so they can be remedied, and (3) program results and effectiveness levels are of sufficiently high quality to demonstrate managerial competence.

  10. PREFACE: International Conference on Computing in High Energy and Nuclear Physics (CHEP 2010)

    Science.gov (United States)

    Lin, Simon C.; Shen, Stella; Neufeld, Niko; Gutsche, Oliver; Cattaneo, Marco; Fisk, Ian; Panzer-Steindel, Bernd; Di Meglio, Alberto; Lokajicek, Milos

    2011-12-01

    The International Conference on Computing in High Energy and Nuclear Physics (CHEP) was held at Academia Sinica in Taipei from 18-22 October 2010. CHEP is a major series of international conferences for physicists and computing professionals from the worldwide High Energy and Nuclear Physics community, Computer Science, and Information Technology. The CHEP conference provides an international forum to exchange information on computing progress and needs for the community, and to review recent, ongoing and future activities. CHEP conferences are held at roughly 18 month intervals, alternating between Europe, Asia, America and other parts of the world. Recent CHEP conferences have been held in Prauge, Czech Republic (2009); Victoria, Canada (2007); Mumbai, India (2006); Interlaken, Switzerland (2004); San Diego, California(2003); Beijing, China (2001); Padova, Italy (2000) CHEP 2010 was organized by Academia Sinica Grid Computing Centre. There was an International Advisory Committee (IAC) setting the overall themes of the conference, a Programme Committee (PC) responsible for the content, as well as Conference Secretariat responsible for the conference infrastructure. There were over 500 attendees with a program that included plenary sessions of invited speakers, a number of parallel sessions comprising around 260 oral and 200 poster presentations, and industrial exhibitions. We thank all the presenters, for the excellent scientific content of their contributions to the conference. Conference tracks covered topics on Online Computing, Event Processing, Software Engineering, Data Stores, and Databases, Distributed Processing and Analysis, Computing Fabrics and Networking Technologies, Grid and Cloud Middleware, and Collaborative Tools. The conference included excursions to various attractions in Northern Taiwan, including Sanhsia Tsu Shih Temple, Yingko, Chiufen Village, the Northeast Coast National Scenic Area, Keelung, Yehliu Geopark, and Wulai Aboriginal Village

  11. Gigashot Optical Laser Demonstrator

    Energy Technology Data Exchange (ETDEWEB)

    Deri, R. J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2015-10-13

    The Gigashot Optical Laser Demonstrator (GOLD) project has demonstrated a novel optical amplifier for high energy pulsed lasers operating at high repetition rates. The amplifier stores enough pump energy to support >10 J of laser output, and employs conduction cooling for thermal management to avoid the need for expensive and bulky high-pressure helium subsystems. A prototype amplifier was fabricated, pumped with diode light at 885 nm, and characterized. Experimental results show that the amplifier provides sufficient small-signal gain and sufficiently low wavefront and birefringence impairments to prove useful in laser systems, at repetition rates up to 60 Hz.

  12. PREFACE: 15th International Conference on the Physics of Highly Charged Ions

    Science.gov (United States)

    Zou, Yaming; Hutton, Roger

    2011-07-01

    This issue contains papers presented at the 15th International Conference on the Physics of Highly Charged Ions, HCI2010. The conference was held at Fudan University, Shanghai, 29 August-3 September 2010. HCI is a biannual conference series going back to the very first conference held in Stockholm, Sweden in 1982. Previous editions in this millennium were held in Berkeley, USA, 2000; Caen, France, 2002; Vilnius, Lithuania, 2004; Belfast, UK, 2006, and Tokyo, Japan, 2008. The physics of highly charged ions, HCIs, is of great interest due to their key role in testing quantum electrodynamics in strong fields, and possible testing of parity non-conservation. However, HCIs also play crucial roles in the physics of hot plasmas, for example those produced in tokamak fusion devices and in inertial confinement fusion experiments. Much of the diagnostics of matter under such extreme environments relies very heavily on high quality atomic data of HCIs. The field of x-ray astronomy hinges almost entirely on the use of spectral lines from HCIs to provide information from distant astrophysical plasmas and objects. Given these fundamental interests and the current rapid developments in fusion and x-ray astronomy, it is clear that the physics of HCIs is a rich area of research with strong and important connections to many important subfields of physics. New application areas of HCI physics are also under development: two examples are (a) to provide 13.5 nm—and later half of this wavelength—radiation for lithography and (b) applications in medical research. The need for high quality atomic data of HCIs is as important now as it has ever been. HCI2010 was attended by over 200 scientists from around 20 countries; see the following table. Over 70 of the participants were students, which is very encouraging for the future of HCI related physics. The academic programme was organized based on the suggestions from the International Advisory Board, and consisted of six review lectures

  13. Cluster analysis of bone microarchitecture from high resolution peripheral quantitative computed tomography demonstrates two separate phenotypes associated with high fracture risk in men and women.

    Science.gov (United States)

    Edwards, M H; Robinson, D E; Ward, K A; Javaid, M K; Walker-Bone, K; Cooper, C; Dennison, E M

    2016-07-01

    Osteoporosis is a major healthcare problem which is conventionally assessed by dual energy X-ray absorptiometry (DXA). New technologies such as high resolution peripheral quantitative computed tomography (HRpQCT) also predict fracture risk. HRpQCT measures a number of bone characteristics that may inform specific patterns of bone deficits. We used cluster analysis to define different bone phenotypes and their relationships to fracture prevalence and areal bone mineral density (BMD). 177 men and 159 women, in whom fracture history was determined by self-report and vertebral fracture assessment, underwent HRpQCT of the distal radius and femoral neck DXA. Five clusters were derived with two clusters associated with elevated fracture risk. "Cluster 1" contained 26 women (50.0% fractured) and 30 men (50.0% fractured) with a lower mean cortical thickness and cortical volumetric BMD, and in men only, a mean total and trabecular area more than the sex-specific cohort mean. "Cluster 2" contained 20 women (50.0% fractured) and 14 men (35.7% fractured) with a lower mean trabecular density and trabecular number than the sex-specific cohort mean. Logistic regression showed fracture rates in these clusters to be significantly higher than the lowest fracture risk cluster [5] (pcluster 5 in women in cluster 1 and 2 (pcluster 2 (pclusters in both men and women which may differ in etiology and response to treatment. As cluster 1 in men does not have low areal BMD, these men may not be identified as high risk by conventional DXA alone. Copyright © 2016. Published by Elsevier Inc.

  14. High throughput detection of Coxiella burnetii by real-time PCR with internal control system and automated DNA preparation

    Directory of Open Access Journals (Sweden)

    Kramme Stefanie

    2008-05-01

    Full Text Available Abstract Background Coxiella burnetii is the causative agent of Q-fever, a widespread zoonosis. Due to its high environmental stability and infectivity it is regarded as a category B biological weapon agent. In domestic animals infection remains either asymptomatic or presents as infertility or abortion. Clinical presentation in humans can range from mild flu-like illness to acute pneumonia and hepatitis. Endocarditis represents the most common form of chronic Q-fever. In humans serology is the gold standard for diagnosis but is inadequate for early case detection. In order to serve as a diagnostic tool in an eventual biological weapon attack or in local epidemics we developed a real-time 5'nuclease based PCR assay with an internal control system. To facilitate high-throughput an automated extraction procedure was evaluated. Results To determine the minimum number of copies that are detectable at 95% chance probit analysis was used. Limit of detection in blood was 2,881 copies/ml [95%CI, 2,188–4,745 copies/ml] with a manual extraction procedure and 4,235 copies/ml [95%CI, 3,143–7,428 copies/ml] with a fully automated extraction procedure, respectively. To demonstrate clinical application a total of 72 specimens of animal origin were compared with respect to manual and automated extraction. A strong correlation between both methods was observed rendering both methods suitable. Testing of 247 follow up specimens of animal origin from a local Q-fever epidemic rendered real-time PCR more sensitive than conventional PCR. Conclusion A sensitive and thoroughly evaluated real-time PCR was established. Its high-throughput mode may show a useful approach to rapidly screen samples in local outbreaks for other organisms relevant for humans or animals. Compared to a conventional PCR assay sensitivity of real-time PCR was higher after testing samples from a local Q-fever outbreak.

  15. PREFACE: International Conference on Computing in High Energy and Nuclear Physics (CHEP 2012)

    Science.gov (United States)

    Ernst, Michael; Düllmann, Dirk; Rind, Ofer; Wong, Tony

    2012-12-01

    The International Conference on Computing in High Energy and Nuclear Physics (CHEP) was held at New York University on 21- 25 May 2012. CHEP is a major series of international conferences for physicists and computing professionals from the High Energy and Nuclear Physics community and related scientific and technical fields. The CHEP conference provides a forum to exchange information on computing progress and needs for the community, and to review recent, ongoing and future activities. CHEP conferences are held at roughly 18-month intervals, alternating between Europe, Asia, the Americas and other parts of the world. Recent CHEP conferences have been held in Taipei, Taiwan (2010); Prague, Czech Republic (2009); Victoria, Canada (2007); Mumbai, India (2006); Interlaken, Switzerland (2004); San Diego, United States (2003); Beijing, China (2001); Padova, Italy (2000). CHEP 2012 was organized by Brookhaven National Laboratory (BNL) and co-sponsored by New York University. The organizational structure for CHEP consists of an International Advisory Committee (IAC) which sets the overall themes of the conference, a Program Organizing Committee (POC) that oversees the program content, and a Local Organizing Committee (LOC) that is responsible for local arrangements (lodging, transportation and social events) and conference logistics (registration, program scheduling, conference site selection and conference proceedings). There were over 500 attendees with a program that included plenary sessions of invited speakers, a number of parallel sessions comprising around 125 oral and 425 poster presentations and industrial exhibitions. We thank all the presenters for the excellent scientific content of their contributions to the conference. Conference tracks covered topics on Online Computing, Event Processing, Distributed Processing and Analysis on Grids and Clouds, Computer Facilities, Production Grids and Networking, Software Engineering, Data Stores and Databases and

  16. A Giant Ovarian Cyst in a Neonate with Classical 21-Hydroxylase Deficiency with Very High Testosterone Levels Demonstrating a High-Dose Hook Effect

    Science.gov (United States)

    Güran, Tülay; Yeşil, Gözde; Güran, Ömer; Cesur, Suna; Bosnalı, Oktav; Celayir, Ayşenur; Topçuoğlu, Sevilay; Bereket, Abdullah

    2012-01-01

    Congenital adrenal hyperplasia (CAH) is a group of disorders affecting the adrenal steroid synthesis. The most common form, 21-hydroxylase deficiency (21-OHD), leads to decreased production of cortisol and aldosterone with increased androgen secretion. In classic CAH, glucocorticoid treatment can be life-saving and serves to bring the symptoms under control. However, the treatment challenge is to effectively control the excess androgen effect by using the lowest possible glucocorticoid dose. Previous studies suggested a relationship between ovarian cyst formation and adrenal androgen excess, but neonatal large ovarian cysts have been very rarely reported in newborns with CAH. Here, we present the unique case of a neonate with classical 21-OHD who underwent surgery for a giant (10x8x7 cm) unilateral solitary ovarian follicular cyst on the 2nd postnatal day. Hormonal evaluation of the patient revealed high-dose hook effect for serum testosterone levels for the first time by a two-site immunoradiometric assay. Possible mechanisms by which androgen excess may cause ovarian cyst formation are discussed. Conflict of interest:None declared. PMID:22664361

  17. Global Monitoring of Mountain Glaciers Using High-Resolution Spotlight Imaging from the International Space Station

    Science.gov (United States)

    Donnellan, A.; Green, J. J.; Bills, B. G.; Goguen, J.; Ansar, A.; Knight, R. L.; Hallet, B.; Scambos, T. A.; Thompson, L. G.; Morin, P. J.

    2013-12-01

    Mountain glaciers around the world are retreating rapidly, contributing about 20% to present-day sea level rise. Numerous studies have shown that mountain glaciers are sensitive to global environmental change. Temperate-latitude glaciers and snowpack provide water for over 1 billion people. Glaciers are a resource for irrigation and hydroelectric power, but also pose flood and avalanche hazards. Accurate mass balance assessments have been made for only 280 glaciers, yet there are over 130,000 in the World Glacier Inventory. The rate of glacier retreat or advance can be highly variable, is poorly sampled, and inadequately understood. Liquid water from ice front lakes, rain, melt, or sea water and debris from rocks, dust, or pollution interact with glacier ice often leading to an amplification of warming and further melting. Many mountain glaciers undergo rapid and episodic events that greatly change their mass balance or extent but are sparsely documented. Events include calving, outburst floods, opening of crevasses, or iceberg motion. Spaceborne high-resolution spotlight optical imaging provides a means of clarifying the relationship between the health of mountain glaciers and global environmental change. Digital elevation models (DEMs) can be constructed from a series of images from a range of perspectives collected by staring at a target during a satellite overpass. It is possible to collect imagery for 1800 targets per month in the ×56° latitude range, construct high-resolution DEMs, and monitor changes in high detail over time with a high-resolution optical telescope mounted on the International Space Station (ISS). Snow and ice type, age, and maturity can be inferred from different color bands as well as distribution of liquid water. Texture, roughness, albedo, and debris distribution can be estimated by measuring bidirectional reflectance distribution functions (BRDF) and reflectance intensity as a function of viewing angle. The non-sun-synchronous orbit

  18. PREFACE: 21st International Conference on Computing in High Energy and Nuclear Physics (CHEP2015)

    Science.gov (United States)

    Sakamoto, H.; Bonacorsi, D.; Ueda, I.; Lyon, A.

    2015-12-01

    The International Conference on Computing in High Energy and Nuclear Physics (CHEP) is a major series of international conferences intended to attract physicists and computing professionals to discuss on recent developments and trends in software and computing for their research communities. Experts from the high energy and nuclear physics, computer science, and information technology communities attend CHEP events. This conference series provides an international forum to exchange experiences and the needs of a wide community, and to present and discuss recent, ongoing, and future activities. At the beginning of the successful series of CHEP conferences in 1985, the latest developments in embedded systems, networking, vector and parallel processing were presented in Amsterdam. The software and computing ecosystem massively evolved since then, and along this path each CHEP event has marked a step further. A vibrant community of experts on a wide range of different high-energy and nuclear physics experiments, as well as technology explorer and industry contacts, attend and discuss the present and future challenges, and shape the future of an entire community. In such a rapidly evolving area, aiming to capture the state-of-the-art on software and computing through a collection of proceedings papers on a journal is a big challenge. Due to the large attendance, the final papers appear on the journal a few months after the conference is over. Additionally, the contributions often report about studies at very heterogeneous statuses, namely studies that are completed, or are just started, or yet to be done. It is not uncommon that by the time a specific paper appears on the journal some of the work is over a year old, or the investigation actually happened in different directions and with different methodologies than originally presented at the conference just a few months before. And by the time the proceedings appear in journal form, new ideas and explorations have

  19. 76 FR 19698 - Safety Zone; Repair of High Voltage Transmission Lines to Logan International Airport, Saugus...

    Science.gov (United States)

    2011-04-08

    ... to Logan International Airport, Saugus River, Saugus, MA AGENCY: Coast Guard, DHS. ACTION: Final rule... to Logan Airport. This safety zone is required to provide for the safety of life on navigable waters... Logan International Airport, Saugus River, Saugus, Massachusetts, in the Federal Register (76 FR...

  20. 76 FR 26183 - Safety Zone; Repair of High Voltage Transmission Lines to Logan International Airport, Saugus...

    Science.gov (United States)

    2011-05-06

    ... to Logan International Airport, Saugus River, Saugus, MA AGENCY: Coast Guard, DHS. ACTION: Temporary... transmission lines to Logan Airport. This safety zone is required to provide for the safety of life on... Lines to Logan International Airport, Saugus River, Saugus, Massachusetts, in the Federal Register...

  1. High resolution feature extraction from optical coherence tomography acquired internal fingerprint

    CSIR Research Space (South Africa)

    Khutlang, Rethabile

    2016-05-01

    Full Text Available coherence tomography (OCT) can be used to scan the internal skin features, up to the depth of the papillary layer. OCT is contactless and scans in three dimensions. The papillary contour represents an internal fingerprint, which does not suffer external skin...

  2. Reduced-mobility layers with high internal mobility in poly(ethylene oxide)-silica nanocomposites

    Science.gov (United States)

    Golitsyn, Yury; Schneider, Gerald J.; Saalwächter, Kay

    2017-05-01

    A series of poly(ethylene oxide) nanocomposites with spherical silica was studied by proton NMR spectroscopy, identifying and characterizing reduced-mobility components arising from either room-temperature lateral adsorption or possibly end-group mediated high-temperature bonding to the silica surface. The study complements earlier neutron-scattering results for some of the samples. The estimated thickness of a layer characterized by significant internal mobility resembling backbone rotation ranges from 2 nm for longer (20 k) chains adsorbed on 42 nm diameter particles to 0.5 nm and below for shorter (2 k) chains on 13 nm particles. In the latter case, even lower adsorbed amounts are found when hydroxy endgroups are replaced by methyl endgroups. Both heating and water addition do not lead to significant changes of the observables, in contrast to other systems such as acrylate polymers adsorbed to silica, where temperature- and solvent-induced softening associated with a glass transition temperature gradient was evidenced. We highlight the actual agreement and complementarity of NMR and neutron scattering results, with the earlier ambiguities mainly arising from different sensitivities to the component fractions and the details of their mobility.

  3. Benefits Of High Internal Work Motivation Comparing Retail Sector To Manufacturing

    Directory of Open Access Journals (Sweden)

    Rickey Casey

    2011-07-01

    Full Text Available The Hackman and Oldhman Model has been tested in several areas with additional testing needed in the service sector.  This study tested the model within a manufacturing company and evaluated several of the dimensions of the model.  This paper will evaluate two of these dimensions; high internal work motivation and task significance.  The plan that was surveyed has a population of 1,000 with 200 sampled.  The company examined is a larger manufacturer of electric motors and the sample was taken from one plant with all three shifts samples.  The plant has a population of 1,000 with 200 sampled.  A comparison study was done in a major retail company.  From the survey sample of 534 employees of the retail company, 330 responses were returned, indicating a 62 percent response rate.  The average age of those responding to the survey was 37.9 years.  Males accounted for 22.7 percent of the respondents’ while 72.7 percent were female.

  4. PREFACE: 14th International Conference on the Physics of Highly Charged Ions (HCI 2008)

    Science.gov (United States)

    Azuma, Toshiyuki; Nakamura, Nobuyuki; Yamada, Chikashi

    2009-07-01

    This volume contains the Proceedings of the 14th International Conference on the Physics of Highly Charged Ions (HCI2008), held at the University of Electro-Communications, Chofu, Tokyo, Japan from 1-5 September 2008. This series of conferences began in Stockholm, Sweden in 1982 and has since been held every other year; in Oxford, UK (1984), Groningen, the Netherlands (1986), Grenoble, France (1988), Giessen, Germany (1990), Manhattan, Kansas, USA (1992), Vienna, Austria (1994), Omiya, Japan (1996), Bensheim, Germany (1998), Berkeley, USA (2000), Caen, France (2002), Vilnius, Lithuania (2004) and Belfast, UK (2006). Highly charged ions (HCI), which are defined as highly ionized (i.e. positively charged atomic) ions here, mainly exist in hot plasmas such as the solar corona and fusion plasmas. It is true that its importance in plasma physics has driven researchers to the spectroscopic studies of HCIs, but the spectroscopy of few-electron ions is not only important for plasmas but also interesting for fundamental atomic physics. Electrons moving fast near a heavy nucleus give a suitable system to test the fundamental atomic theory involving relativistic and quantum electro-dynamic effects in a strong field. Also, the huge potential energy of a HCI induces drastic reaction in the interaction with matter. This unique property of HCIs, coupled with the recent development of efficient ion sources, is opening the possibility to utilize them in new technologies in the field such as nano-fabrication, surface analysis, medical physics, and so on. Hence, this conference is recognized as a valuable gathering place for established practitioners and also for newcomers; we exchange information, we are introduced to the subject itself, and to unexpected interfaces with other fields. On 31 August, the day before the opening of HCI2008, we welcomed the delegates at the university's restaurant—and we were greeted with an unusually heavy summer shower! The conference then opened on

  5. The CALorimetric Electron Telescope (CALET for high-energy astroparticle physics on the International Space Station

    Directory of Open Access Journals (Sweden)

    Adriani O.

    2015-01-01

    Full Text Available The CALorimetric Electron Telescope (CALET is a space experiment, currently under development by Japan in collaboration with Italy and the United States, which will measure the flux of cosmic-ray electrons (and positrons up to 20 TeV energy, of gamma rays up to 10 TeV, of nuclei with Z from 1 to 40 up to 1 PeV energy, and will detect gamma-ray bursts in the 7 keV to 20 MeV energy range during a 5 year mission. These measurements are essential to investigate possible nearby astrophysical sources of high energy electrons, study the details of galactic particle propagation and search for dark matter signatures. The main detector of CALET, the Calorimeter, consists of a module to identify the particle charge, followed by a thin imaging calorimeter (3 radiation lengths with tungsten plates interleaving scintillating fibre planes, and a thick energy measuring calorimeter (27 radiation lengths composed of lead tungstate logs. The Calorimeter has the depth, imaging capabilities and energy resolution necessary for excellent separation between hadrons, electrons and gamma rays. The instrument is currently being prepared for launch (expected in 2015 to the International Space Station ISS, for installation on the Japanese Experiment Module - Exposure Facility (JEM-EF.

  6. CALOR2012 XVth International Conference on Calorimetry in High Energy Physics

    Energy Technology Data Exchange (ETDEWEB)

    Akchurin, Nural .

    2015-05-04

    The International Conferences on Calorimetry in High Energy Physics, or the CALOR series, have always been where the calorimeter experts come together to review the state of calorimetry and bring forth new ideas every two years. The fteenth conference, CALOR2012, in Santa Fe was no exception. Although they were built roughly a decade ago, we are now witnessing the exceptional power of the LHC calorimeters and the crucial role they have been playing in the discovery of the 125 GeV Higgs-like boson. As we ruminate on the coming generation of experiments at the next (linear) collider and on the upgrades at the LHC, we are heartened by the substantial advances we made in calorimetry in the last decade. These advances will certainly help uncover new physics in the years to come, not only at colliders but also in astroparticle experiments that take advantage of natural elements such as air, water, and ice. The proceedings were published by the IOP in Journal of Physics, Vol 404 2011. The conference web site is calor2012.ttu.edu.

  7. High intraindividual variation in internal transcibed spacer sequences in Aeschynanthus (Gesneriaceae): implications for phylogenetics.

    Science.gov (United States)

    Denduangboripant, J; Cronk, Q C

    2000-07-22

    Aeschynanthus (Gesneriaceae) is a large genus of tropical epiphytes that is widely distributed from the Himalayas and China throughout South-East Asia to New Guinea and the Solomon Islands. Polymerase chain reaction (PCR) consensus sequences of the internal transcribed spacers (ITS) of Aeschynanthus nuclear ribosomal DNA showed sequence polymorphism that was difficult to interpret. Cloning individual sequences from the PCR product generated a phylogenetic tree of 23 Aeschynanthus species (two clones per species). The intraindividual clone pairs varied from 0 to 5.01%. We suggest that the high intraindividual sequence variation results from low molecular drive in the ITS of Aeschynanthus. However, this study shows that, despite the variation found within some individuals, it is still possible to use these data to reconstruct phylogenetic relationships of the species, suggesting that clone variation, although persistent, does not pre-date the divergence of Aeschynanthus species. The Aeschynanthus analysis revealed two major clades with different but overlapping geographic distributions and reflected classification based on morphology (particularly seed hair type).

  8. High internal ionic liquid phase emulsion stabilized by metal-organic frameworks.

    Science.gov (United States)

    Li, Zhihao; Zhang, Jianling; Luo, Tian; Tan, Xiuniang; Liu, Chengcheng; Sang, Xinxin; Ma, Xue; Han, Buxing; Yang, Guanying

    2016-11-04

    The emulsification of metal-organic frameworks (MOFs) for the two immiscible phases of water and ionic liquid (IL) was investigated for the first time. It was found that Ni-BDC (BDC = 1,4-dicarboxybenzene) can emulsify water and ILs and favor the formation of high internal phase emulsions (HIPEs) under certain experimental conditions. The microstructures of the HIPEs were characterized by confocal laser scanning microscopy using a fluorescent dye Rhodamine B, which proves that the HIPEs are the IL-in-water type. Further results reveal that the HIPE forms during the IL-in-water to water-in-IL emulsion inversion. The possibilities of the HIPE formation by other MOFs (Cu-BDC and Zn-BDC) were explored and the mechanism for HIPE formation was discussed. The MOF-stabilized HIPE was applied to the in situ synthesis of a MOF/polymer composite by HIPE polymerization. The macroporous MOF/polyacrylamide network and MOF/polystyrene microspheres were obtained from the HIPEs, respectively.

  9. 3rd International Conference on High-energy Physics and Nuclear Structure

    CERN Document Server

    High energy physics and nuclear structure

    1970-01-01

    In preparing the program for this Conference, the third in the series, it soon became evident that it was not possible to in­ clude in a conference of reasonable duration all the topics that might be subsumed under the broad title, "High Energy Physics and Nuclear Structure. " From their initiation, in 1963, it has been as much the aim of these Conferences to provide some bridges between the steadily separating domains of particle and nuclear physics, as to explore thoroughly the borderline territory between the two -­ the sort of no-man's-land that lies unclaimed, or claimed by both sides. The past few years have witnessed the rapid development of many new routes connecting the two major areas of 'elementary par­ ticles' and 'nuclear structure', and these now spread over a great expanse of physics, logically perhaps including the whole of both subjects. (As recently as 1954, an International Conference on 'Nuclear and Meson Physics' did, in fact, embrace both fields!) Since it is not now possibl...

  10. PREFACE: 16th International Conference on Calorimetry in High Energy Physics (CALOR 2014)

    Science.gov (United States)

    Novotny, Rainer W.

    2015-02-01

    The XVIth International Conference on Calorimetry in High Energy Physics - CALOR 2014 - was held in Giessen, Germany from 6-11 April 2014 at the Science Campus of the University. It was hosted by the Justus-Liebig-University and the HIC for FAIR Helmholtz International Center. The series of conferences on calorimetry were started in 1990 at Fermilab and are focusing primarily on operating and future calorimeter systems within the Hadron and High-Energy Physics community without neglecting the impact on other fields such as Astrophysics or Medical Imaging. Confirmed by the impressive list of over 70 oral presentations, 5 posters and over 100 attendees, the field of calorimetry appears alive and attractive. The present volume contains the written contributions of almost all presentations which can be found at http://calor2014.de. Time slots of 15 or 30 minutes including discussion were allocated. The conference was accompanied by a small exhibition of several industrial companies related to the field. The day before the opening of the scientific program, Richard Wigmans gave an excellent and vivid tutorial on basic aspects on calorimetry meant as an introduction for students and conference attendees new in the field. The opening ceremony was used to give an impression of the present and future status and the scientific program of the new FAIR facility nearby at Darmstadt presented by Klaus Peters from GSI. The conference program of the first day was dedicated to the performance and required future upgrade of the LHC experiments, dominated by ATLAS, CMS and LHCb. The program of the next day contained specific aspects on electronics and readout as well as calorimetry in outer space. Several contributions discussed in detail new concepts for hadron calorimeters within the CALICE collaboration completed by a session on sampling calorimeters. The next sections were dedicated to operating and future calorimeters at various laboratories and covering a wide range of

  11. Relativistic electrons high doses at International Space Station and Foton M2/M3 satellites

    Science.gov (United States)

    Dachev, T. P.; Tomov, B.; Matviichuk, Yu.; Dimitrov, Pl.; Bankov, N.

    2009-12-01

    The paper presents observation of relativistic electrons. Data are collected by the Radiation Risk Radiometer-Dosimeters (R3D) B2/B3 modifications during the flights of Foton M2/M3 satellites in 2005 and 2007 as well as by the R3DE instrument at the European Technology Exposure Facility (EuTEF) on the Columbus External Payload Adaptor at the International Space Station (ISS) in the period February 20 - April 28, 2008. On the Foton M2/M3 satellites relativistic electrons are observed more frequently than on the ISS because of higher (62.8°) inclination of the orbit. At both Foton satellites the usual duration of the observations are a few minutes long. On the ISS the duration usually is about 1 min or less. The places of observations of high doses due to relativistic electrons are distributed mainly at latitudes above 50° geographic latitude in both hemispheres on Foton M2/M3 satellites. A very high maximum is found in the southern hemisphere at longitudinal range 0°-60°E. At the ISS the maximums are observed between 45° and 52° geographic latitude in both hemispheres mainly at longitudes equatorward from the magnetic poles. The measured absolute maximums of dose rates generated by relativistic electrons are found to be as follows: 304 μGy h -1 behind 1.75 g cm -2 shielding at Foton M2, 2314 μGy h -1 behind 0.71 g cm -2 shielding at Foton M3 and 19,195 μGy h -1 (Flux is 8363 cm -2 s -1) behind les than 0.4 g cm -2 shielding at ISS.

  12. The 8th International Conference on Highly Frustrated Magnetism (HFM 2016)

    Science.gov (United States)

    Gardner, J. S.; Kao, Y. J.

    2017-04-01

    The 8th International Conference on Highly Frustrated Magnetism 2016 (HFM 2016) took place between the 7th and 11th of September 2016 at the GIS Convention Center at National Taiwan University, Taipei, Taiwan. Over 260 participants from all over the world, attended the meeting making it the largest HFM to-date and revealing the impressive growth in the community since the original meeting in Waterloo, Canada where 80 participants attended. Preceding the meeting a school was held at the National Synchrotron Radiation Research Center to help those new to the field understand the material they were likely to see at HFM2016. Our thanks to the international speakers who attended this school John Chalker, Michel Kenzelmann, Philippe Mendels, Luigi Paolasini, Kirrily Rule, Yixi Su, Isao Watanabe and those from Taiwan W. T. Chen, Y-J, Kao, L. J. Chang and C. S. Ku, for their enlightening presentations. The HFM 2016 conference consisted of five plenary talks by H Takagi, B D Gaulin, L Balents, Y Tokura and S T Bramwell, 20 invited and 40 contributed presentations, and about 160 poster presentations from all aspects of theoretical and experimental frustrated magnetism. During the conference period, many stimulating discussions were held both inside and outside the conference room. Excursions to Taipei 101 and the National Palace Museum, as well as several organized dinners and receptions allowed the participants to initiate collaborations and discuss the hottest issues. The subjects covered in the conference included: · Quantum frustrated magnetism and spin liquids · Novel ordering of geometrically frustrated magnets · Frustration effect on the coupling to lattice, orbital and charge degrees of freedom · Exotic phenomena induced by macroscopic degeneracy · Field effect on frustrated magnetism etc. These proceeding represent a very small, but valuable contribution to the community. I hope you enjoy reading them. In view of the rapid growth of the field, it has been

  13. PREFACE: 17th International Conference on the Physics of Highly Charged Ions

    Science.gov (United States)

    2015-01-01

    The 17th edition of the International Conference on the Physics of Highly Charged Ions (HCI 2014) was held in San Carlos de Bariloche, in the southern region of Argentina known as Patagonia, from August 31 to September 5, 2014. This meeting corresponds to a series of HCI conferences, which has been held every other year since 1982 in cities in Europe, USA, Japan and China. This was the first time that the conference took place in Latin America. This edition was organized by a Local Committee made up of physicists mainly from the cities of Bariloche and Rosario and also from Buenos Aires and Bahía Blanca, all sites where research on Atomic Collisions is developed. The conference was attended by delegates coming from 18 countries, more that 23% of whom were women. The field of highly charged ions has seen in recent years a promising evolution originating from bold progress in theory and significant advances in experimental techniques. The HCI conferences aim at bringing together experimentalists and theoreticians from as wide a range of fields as, for instance, Fundamental Aspects, Structure and Spectroscopy, Collisions with Electrons, Ions, Atoms and Molecules, Interaction with Clusters, Surfaces and Solids, Interactions with Photons and Plasmas, Strong Field Processes, and Production, Experimental Developments and Applications. The Scientific Programme, selected by an International Advisory Board, included 5 Review Lectures, 11 Progress Reports, 1 Local Report and 24 Special Reports. In addition, the results of 132 contributed works were presented as poster communications and a Public Lecture on 'The wonders of the Southern Skies' was delivered by an Argentinean expert. Thus, a wide range of subjects comprising a balanced mix of topics was covered throughout the course of the conference. The HCI 2014 was a resounding success for the international and local communities, from both the scientific and social aspects, considering that the attendees and accompanying

  14. A flexible and high-voltage internal tandem supercapacitor based on graphene-based porous materials with ultrahigh energy density.

    Science.gov (United States)

    Zhang, Fan; Lu, Yanhong; Yang, Xi; Zhang, Long; Zhang, Tengfei; Leng, Kai; Wu, Yingpeng; Huang, Yi; Ma, Yanfeng; Chen, Yongsheng

    2014-06-12

    Pursuing higher working voltage and packaged energy density, an internal tandem supercapacitor has been successfully designed and fabricated based on graphene-based porous carbon hybrid material. Compared with the packaged energy density of 27.2 Wh kgcell (-1) and working voltage of 3.5 V using EMIMBF4 electrolyte for the conventional single-cell supercapacitor, the internal tandem device with the same material achieves a much higher working voltage of 7 V as well as a significantly improved energy density of 36.3 Wh kgcell (-1) (increased by 33%), which is also about 7 times of that of the state-of-art commercial supercapacitors. A flexible internal tandem device is also designed and fabricated and demonstrated similar excellent performance.

  15. The ISON international campaigns for monitoring of faint high altitude objects

    Science.gov (United States)

    Molotov, Igor; Agapov, Vladimir; Rumyantsev, Vasiliy; Biryukov, Vadim; Schildknecht, Thomas; Bakhtigaraev, Nail; Ibrahimov, Mansur; Papushev, Pavel; Minikulov, Nasredin; Andrievsky, Sergei

    The research of the space debris fragments at high orbits is one of the main directions of the International Scientific Optical Network (ISON) activities. Therefore the dedicated ISON subsystem for high altitude faint space debris observations is arranged with the aim of detection and continuous tracking of as large number of unknown high altitude faint objects as possible. The subsystem includes the number of large telescopes that are able to detect the objects down to 20m-21m and the middle-size telescopes for the observations of the space objects of 15m-18m. The 1-m ZIMLAT in Zimmerwald, Switzerland, 1.5-m AZT-33IK in Mondy, Siberia, 64-cm AT- 64 in Nauchniy, Crimea, 60-cm RK-600 in Mayaki near Odessa, Ukraine, 60-cm Zeiss-600 in Maidanak, Uzbekistan, 70-cm AZT-8 in Gissar, Tajikistan are regularly participating in ISON observing campaigns in collaboration with 1-m Zeiss-1000 ESA space debris telescope in Teide, Canaries islands. 2.6-m ZTSh in Nauchniy, Crimea, 2-m Zeiss-2000 in Terskol, North Caucasus, 1-m Zeiss-1000 in Simeiz, Crimea, 1-m Zeiss-1000 in Arkhyz, North Caucasus are joining during few nights per month. The 60-cm Zeiss-600 in Arkhyz, 70-cm AZT-8 in Evpatoria, Crimea, 60-cm Zeiss-600 in Tarija, Bolivia, 80-cm RK-800 in Mayaki, 80-cm K-800 in Terskol, 50-cm in Ussuriysk, Far East will be added to the subsystem during 2008. The observing campaigns are coordinates by the Center on space debris data collection, processing and analysis of the KIAM RAS in cooperation with the AIUB space debris team. 353 faint objects are discovered in GEO region surveys during the last 3 years (about 100000 measurements were collected for this time), including objects with high AMR. Results are publishing monthly by KIAM in High Geocentric Orbit Space Debris Circular. We will discuss the most interesting of obtained results. Many of discovered fragments are associated with space debris clouds appeared as a result of known or suspected fragmentations occurred in GEO region

  16. Demonstration of a Ge/GeSn/Ge quantum-well microdisk resonator on silicon: enabling high-quality Ge(Sn) materials for micro- and nanophotonics.

    Science.gov (United States)

    Chen, Robert; Gupta, Suyog; Huang, Yi-Chiau; Huo, Yijie; Rudy, Charles W; Sanchez, Errol; Kim, Yihwan; Kamins, Theodore I; Saraswat, Krishna C; Harris, James S

    2014-01-08

    We theoretically study and experimentally demonstrate a pseudomorphic Ge/Ge0.92Sn0.08/Ge quantum-well microdisk resonator on Ge/Si (001) as a route toward a compact GeSn-based laser on silicon. The structure theoretically exhibits many electronic and optical advantages in laser design, and microdisk resonators using these structures can be precisely fabricated away from highly defective regions in the Ge buffer using a novel etch-stop process. Photoluminescence measurements on 2.7 μm diameter microdisks reveal sharp whispering-gallery-mode resonances (Q > 340) with strong luminescence.

  17. 1H High Resolution Magic-Angle Coil Spinning (HR-MACS) - NMR Metabolic Profiling of whole Saccharomyces cervisiae cells: A Demonstrative Study

    Science.gov (United States)

    Wong, Alan; Boutin, Celine; Aguiar, Pedro

    2014-06-01

    The low sensitivity of Nuclear Magnetic Resonance (NMR) is its prime shortcoming compared to other analytical methods for metabolomic studies. It relies on large sample volume (30-50 µl for HR-MAS) for rich metabolic profiling, hindering high-throughput screening especially when the sample requires a labor-intensive preparation or is a sacred specimen. This is indeed the case for some living organisms. This study evaluates a 1H HR-MAS approach for metabolic profiling of small volume (250 nl) whole bacterial cells, Saccharomyces cervisiae, using an emerging micro-NMR technology: high-resolution magic-angle coil spinning (HR-MACS). As a demonstrative study for whole cells, we perform two independent metabolomics studies identifying the significant metabolites associated with osmotic stress and aging.

  18. 1H High Resolution Magic-Angle Coil Spinning (HR-MACS µNMR Metabolic Profiling of whole Saccharomyces cervisiae cells: A Demonstrative Study

    Directory of Open Access Journals (Sweden)

    Alan eWong

    2014-06-01

    Full Text Available The low sensitivity of Nuclear Magnetic Resonance (NMR is its prime shortcoming compared to other analytical methods for metabolomic studies. It relies on large sample volume (30–50 µl for HR-MAS for rich metabolic profiling, hindering high-throughput screening especially when the sample requires a labor-intensive preparation or is a sacred specimen. This is indeed the case for some living organisms. This study evaluates a 1H HR-MAS approach for metabolic profiling of small volume (250 nl whole bacterial cells, Saccharomyces cervisiae, using an emerging micro-NMR technology: high-resolution magic-angle coil spinning (HR-MACS. As a demonstrative study for whole cells, we perform two independent metabolomics studies identifying the significant metabolites associated with osmotic stress and aging.

  19. Vitrectomy with internal limiting membrane peeling for macular hole in high myopia eyes

    Directory of Open Access Journals (Sweden)

    Chun-Mei Deng

    2015-08-01

    Full Text Available AIM: To compare the clinical effects between pars plana vitrectomy(PPVand PPV with internal limiting membrane peeling(ILMPfor macular hole in high myopia eyes. METHODS:The clinical data of 33 high myopia with macular hole patients(36 eyeswith or without retinal detachment caused by macular hole were retrospectively analyzed. The patients were divided into two groups according to different operation methods: 15 eyes in groupⅠhad undergone PPV; 21 eyes in groupⅡhad undergone PPV with ILMPP peeling. According to different conditions of patients,different auxiliary methods were accepted, such as silicone oil tamponade, C3F8 tamponade, photocoagulation, condensation, etc. The follow-up period was 3~12mo. Best corrected visual acuity(BCVA, macular hole closure rate and retinal reattachment rate were continuous checked after operation. Then we evaluated the outcome in the two groups by statistical analysis.RESULTS: The postoperative mean BCVA increased by 0.167 in group Ⅰand 0.456 in group Ⅱ than preoperative, the difference was significant(t=2.46,6.753; P=0.027,0.000. And the difference of BCVA improvement was significant between those two groups(t=-2.943, P=0.006. The macular hole closed in 7 eyes(46.67%in group Ⅰ,and 18 eyes(85.71%in group Ⅱ; The difference was significant between those two groups(χ2=6.287,P=0.025.Retinal reattachment was found in 11 eyes(91.67%in group Ⅰ and 19 eyes(94.73%in group Ⅱ. The difference was not significant between the two groups(χ2=0.856, P=0.418. CONCLUSION: PPV with ILMPP peeling for macular hole in high myopia eyes can obviously improve closure of macular hole and postoperative visual acuity. But the difference of retinal reattachment rate was not significant between peeling and unpeeling of ILMP.

  20. A high pressure x-ray photoelectron spectroscopy experimental method for characterization of solid-liquid interfaces demonstrated with a Li-ion battery system

    Energy Technology Data Exchange (ETDEWEB)

    Maibach, Julia; Xu, Chao; Gustafsson, Torbjörn; Edström, Kristina [Department of Chemistry–Ångström Laboratory, Uppsala University, Box 538, SE-751 21 Uppsala (Sweden); Eriksson, Susanna K. [Department of Chemistry–Ångström Laboratory, Uppsala University, Box 523, SE-751 20 Uppsala (Sweden); Åhlund, John [VG Scienta AB, Box 15120, SE-750 15 Uppsala (Sweden); Siegbahn, Hans; Rensmo, Håkan; Hahlin, Maria, E-mail: maria.hahlin@physics.uu.se [Department of Physics and Astronomy, Uppsala University, Box 516, SE-751 20 Uppsala (Sweden)

    2015-04-15

    We report a methodology for a direct investigation of the solid/liquid interface using high pressure x-ray photoelectron spectroscopy (HPXPS). The technique was demonstrated with an electrochemical system represented by a Li-ion battery using a silicon electrode and a liquid electrolyte of LiClO{sub 4} in propylene carbonate (PC) cycled versus metallic lithium. For the first time the presence of a liquid electrolyte was realized using a transfer procedure where the sample was introduced into a 2 mbar N{sub 2} environment in the analysis chamber without an intermediate ultrahigh vacuum (UHV) step in the load lock. The procedure was characterized in detail concerning lateral drop gradients as well as stability of measurement conditions over time. The X-ray photoelectron spectroscopy (XPS) measurements demonstrate that the solid substrate and the liquid electrolyte can be observed simultaneously. The results show that the solid electrolyte interphase (SEI) composition for the wet electrode is stable within the probing time and generally agrees well with traditional UHV studies. Since the methodology can easily be adjusted to various high pressure photoelectron spectroscopy systems, extending the approach towards operando solid/liquid interface studies using liquid electrolytes seems now feasible.

  1. A high-content subtractive screen for selecting small molecules affecting internalization of GPCRs

    CSIR Research Space (South Africa)

    Kwon, Y-J

    2012-03-01

    Full Text Available was screened against seven agonist-induced GPCR internalization cell models as well as transferrin uptake in human embryonic kidney cells. Molecules acting on a single receptor were identified through excluding pan-specific compounds affecting housekeeping...

  2. Distance Learning Environment Demonstration.

    Science.gov (United States)

    1996-11-01

    The Distance Learning Environment Demonstration (DLED) was a comparative study of distributed multimedia computer-based training using low cost high...measurement. The DLED project provides baseline research in the effective use of distance learning and multimedia communications over a wide area ATM/SONET

  3. Characterizing high-temperature deformation of internally heated nuclear fuel element simulators

    Energy Technology Data Exchange (ETDEWEB)

    Belov, A.I.; Fong, R.W.L.; Leitch, B.W.; Nitheanandan, T.; Williams, A., E-mail: alexander.belov@cnl.ca [Canadian Nuclear Laboratories, Chalk River, Ontario (Canada)

    2016-06-15

    The sag behaviour of a simulated nuclear fuel element during high-temperature transients has been investigated in an experiment utilizing an internal indirect heating method. The major motivation of the experiment was to improve understanding of the dominant mechanisms underlying the element thermo-mechanical response under loss-of-coolant accident conditions and to obtain accurate experimental data to support development of 3-D computational fuel element models. The experiment was conducted using an electrically heated CANDU fuel element simulator. Three consecutive thermal cycles with peak temperatures up to ≈1000 {sup o}C were applied to the element. The element sag deflections and sheath temperatures were measured. On heating up to 600 {sup o}C, only minor lateral deflections of the element were observed. Further heating to above 700 {sup o}C resulted in an element multi-rate creep and significant permanent bow. Post-test visual and X-ray examinations revealed a pronounced necking of the sheath at the pellet-to-pellet interface locations. A wall thickness reduction was detected in the necked region that is interpreted as a sheath longitudinal strain localization effect. The sheath cross-sectioning showed signs of a 'hard' pellet-cladding interaction due to the applied cycles. A 3-D model of the experiment was generated using the ANSYS finite element code. As a fully coupled thermal mechanical simulation is computationally expensive, it was deemed sufficient to use the measured sheath temperatures as a boundary condition, and thus an uncoupled mechanical simulation only was conducted. The ANSYS simulation results match the experiment sag observations well up to the point at which the fuel element started cooling down. (author)

  4. International student mobility and highly skilled migration: a comparative study of Canada, the United States, and the United Kingdom.

    Science.gov (United States)

    She, Qianru; Wotherspoon, Terry

    2013-12-01

    Against the backdrop of demographic change and economic reconfiguration, recruiting international students, especially those at tertiary level, has drawn growing attention from advanced economies as part of a broad strategy to manage highly skilled migration. This comparative study focuses on three English speaking countries receiving international students: Canada, the United States, and the United Kingdom. International student policies, in particular entry and immigration regulations, and the trends in student mobility since the late 1990s are examined drawing on secondary data. By exploring the issue from the political economy perspectives, this study identifies distinct national strategies for managing student mobility, determines key factors shaping the environment of student migration in each nation, and addresses the deficiency of human capital theory in the analysis of global competition for high skills.

  5. Demonstration of selective catalytic reduction (SCR) technology for the control of nitrogen oxide (NO sub x ) emissions from high-sulfur coal-fired boilers

    Energy Technology Data Exchange (ETDEWEB)

    1991-08-01

    The objective of this project is to demonstrate and evaluate commercially available Selective Catalytic Reduction (SCR) catalysts from US, Japanese and European catalyst suppliers on a high-sulfur US coal-fired boiler. SCR is a post-combustion nitrogen oxide (NOx) control technology that involves injecting ammonia into the flue gas generated from coal combustion in an electric utility boiler. The flue gas containing ammonia is then passed through a reactor that contains a specialized catalyst. In the presence of the catalyst, the ammonia reacts with NOx to convert it to nitrogen and water vapor, Although SCR is widely practiced in Japan and Europe, there are numerous technical uncertainties associated with applying SCR to US coals. These uncertainties include: (1) potential catalyst deactivation due to poisoning by trace metal species present in US coals that are not present in other fuel performance of the technology and effects on the balance-of-plant equipment in the presence of high amounts of SO{sub 2} and SO{sub 3}. (3) performance of a wide variety of SCR catalyst compositions, geometries and methods of manufacture under typical high-sulfur coal-fired utility operating conditions. These uncertainties will be explored by constructing a series of small-scale SCR reactors and simultaneously exposing different SCR catalysts to flue gas derived from the combustion of high sulfur US coal.

  6. Demonstration of selective catalytic reduction (SCR) technology for the control of nitrogen oxide (NO[sub x]) emissions from high-sulfur coal-fired boilers

    Energy Technology Data Exchange (ETDEWEB)

    1992-08-01

    The objective of this project is to demonstrate and evaluate commercially available Selective Catalytic Reduction (SCR) catalysts from US, Japanese and European catalyst suppliers on a high-sulfur US coal-fired boiler. SCR is a post-combustion nitrogen oxide (NO[sub x]) control technology that involves injecting ammonia into the flue gas generated from coal combustion in an electric utility boiler. The flue gas containing ammonia is then passed through a reactor that contains a specialized catalyst. In the presence of the catalyst, the ammonia reacts with NO[sub x] to convert it to nitrogen and water vapor. Although SCR is widely practiced in Japan and Europe, there are numerous technical uncertainties associated with applying SCR to US coals. These uncertainties include: (1) potential catalyst deactivation due to poisoning by trace metal species present in US coals that are not present in other fuels. (2) performance of the technology and effects on the balance-of-plant equipment in the presence of high amounts of SO[sub 2] and SO[sub 3]. (3) performance of a wide variety of SCR catalyst compositions, geometries and methods of manufacture under typical high-sulfur coal-fired utility operating conditions. These uncertainties will be explored by constructing a series of small-scale SCR reactors and simultaneously exposing different SCR catalysts to flue gas derived from the combustion of high sulfur U. S. coal.

  7. 16th international conference on the physics of highly charged ions

    Science.gov (United States)

    Fritzsche, Stephan; Stöhlker, Thomas; Surzhykov, Andrey

    2013-09-01

    This volume contains the proceedings of the 16th International Conference on the Physics of Highly Charged Ions (HCI 2012) held at the Ruprecht-Karls University in Heidelberg, Germany, 2-7 September 2012 (figure 1). This conference has been part of a biannual conference series that was started in Stockholm in 1982 and, since then, has been organized at various places around the world, with recent venues in Belfast (UK, 2006), Tokyo (Japan, 2008) and Shanghai (China, 2010). The physics of highly charged ions (HCI) is a rapidly developing and attractive field of research with impact upon many other research disciplines. Apart from fundamental studies on the structure and dynamics of matter in extreme fields, or the search for physics beyond the standard model, detailed knowledge about the properties and behavior of HCI is crucial for other areas, from astro- and solar physics to hot plasma and fusion research to extreme ultra-violet and ion lithography, or even to medical research, to name just a few. In fusion research, for example, of whether tokamak, stellarator or confinement fusion facilities, most models and diagnostics deeply rely on the understanding of HCI and the (theoretical) prediction of accurate atomic data for these systems. In life science, moreover, ion therapy or the laser acceleration of ions and electrons may help save and improve the quality of life in the future. Many of these and further topics are addressed in these proceedings. After 30 years, the HCI conference series, and especially the meeting in Heidelberg, is appreciated much as a key forum for bringing together senior experts with students, young researchers and scientists from related disciplines who make use and give back impact upon the research with HCI. More than 250 scientists from 23 countries participated in HCI 2012 and presented the current status of the field. About one third of them were post-graduate students, showing that the field attracts many young and talented

  8. Measurements of internal stresses in bond coating using high energy x-rays from synchrotron radiation source

    CERN Document Server

    Suzuki, K; Akiniwa, Y; Nishio, K; Kawamura, M; Okado, H

    2002-01-01

    Thermal barrier coating (TBC) techniques enable high temperature combustion of turbines made of Ni-base alloy. TBC is made of zirconia top coating on NiCoCrAlY bond coating. The internal stresses in the bond coating play essential role in the delamination or fracture of TBC in service. With the X-rays from laboratory equipments, it is impossible to measure nondestructively the internal stress in the bond coating under the top coating. synchrotron radiations with a high energy and high brightness have a large penetration depth as compared with laboratory X-rays. Using the high energy X-rays from the synchrotron radiation, it is possible to measure the internal stress in the bond coating through the top coating. In this study, the furnace, which can heat a specimen to 1473 K, was developed for the stress measurement of the thermal barrier coatings. The internal stresses in the bond coating were measured at the room temperature, 773 K, 1073 K and 1373 K by using the 311 diffraction from Ni sub 3 Al with about 73...

  9. "If You Need Help, They Are Always There for Us": Education for Refugees in an International High School in NYC

    Science.gov (United States)

    Mendenhall, Mary; Bartlett, Lesley; Ghaffar-Kucher, Ameena

    2017-01-01

    This qualitative study examines how an "international" high school in New York City responds to the needs of refugee students. It asks: "What are the specific academic needs of secondary-level refugee students? How does one school meet their needs, and what challenges are encountered?" To complement one-on-one semi-structured…

  10. The "T-MIDCAB" procedure. Use of extension grafts from the undisturbed internal mammary artery in high-risk patients.

    Science.gov (United States)

    Coulson, A S; Bakhshay, S A

    1998-01-01

    Minimally invasive direct coronary artery bypass grafting (MIDCAB) is an attractive new alternative for revascularizing patients with high perioperative risk for standard coronary surgery. However, limited surgical exposure through a small thoracotomy makes harvesting the full length of the internal mammary artery (IMA) very difficult and time consuming. We are now employing a new alternative with a "T" shaped bridge graft constructed from the undisturbed IMA using a 4 centimeter interposition segment of donor vessel. We prefer this approach in high risk cases in order to reduce the trauma of the thoracotomy, minimize pain and narcotic use, promote early extubation, and achieve immediate post-operative mobilization and recovery in patients who would otherwise be at risk for a poor outcome with conventional grafting techniques. From September 10, 1997 to December 19, 1997 eight high-risk patients underwent at least one "T-MIDCAB" graft from the undisturbed IMA to the coronary artery using a short segment of either radial artery or saphenous vein. All cases were performed using a limited access anterior thoracotomy through the bed of the resected costal cartilage and without intercostal retraction. Five males and three females ranging from 58 to 83 years (average 73 years) were operated using this new concept. Pre-operative ejection fractions ranged from 25% to 80% (mean 43%). Parsonnet scores ranged from 21 to 43 (average 34) with predicted mortalities ranging from 30 to 40%. Eleven "T" grafts were placed (1.38 distals/patient). All 8 patients survived. Postoperative complications were minimal. The average length of stay was only 8 days (range 3 to 9 days). Intensive care unit stay averaged 3 days (range 1 to 4 days). One patient underwent postoperative angiography which demonstrated full patency of the conduit and all anastomoses. "T-MIDCAB" using a bridge graft of free radial artery or saphenous vein appears to be successful in high risk patients. The authors

  11. Internalization mechanism of neuropeptide Y bound to its Y1 receptor investigated by high resolution microscopy

    Science.gov (United States)

    Kempf, Noémie; Didier, Pascal; Postupalenko, Viktoriia; Bucher, Bernard; Mély, Yves

    2015-06-01

    The neuropeptide Y (NPY) plays numerous biological roles that are mediated by a family of G-protein-coupled receptors. Among the latter, the NPY Y1 subtype receptor undergoes a rapid desensitization following agonist exposure. This desensitization was suggested to result from a rapid clathrin-dependent internalization of Y1 and its recycling at the plasma membrane via sorting/early endosomes (SE/EE) and recycling endosomes (RE). Herein, to validate and quantitatively consolidate the mechanism of NPY internalization, we quantitatively investigated the NPY-induced internalization of the Y1 receptor by direct stochastic optical reconstruction microscopy (dSTORM), a super-resolution imaging technique that can resolve EE and SE, which are below the resolution limit of conventional optical microscopes. Using Cy5-labeled NPY, we could monitor with time the internalization and recycling of NPY on HEK293 cells stably expressing eGFP-labeled Y1 receptors. Furthermore, by discriminating the SE/EE from the larger RE by their sizes and monitoring these two populations as a function of time, we could firmly consolidate the kinetic model describing the internalization mechanism of the Y1 receptors as the basis for their rapid desensitization following agonist exposure.

  12. Visual recovery in cortical blindness is limited by high internal noise.

    Science.gov (United States)

    Cavanaugh, Matthew R; Zhang, Ruyuan; Melnick, Michael D; Das, Anasuya; Roberts, Mariel; Tadin, Duje; Carrasco, Marisa; Huxlin, Krystel R

    2015-01-01

    Damage to the primary visual cortex typically causes cortical blindness (CB) in the hemifield contralateral to the damaged hemisphere. Recent evidence indicates that visual training can partially reverse CB at trained locations. Whereas training induces near-complete recovery of coarse direction and orientation discriminations, deficits in fine motion processing remain. Here, we systematically disentangle components of the perceptual inefficiencies present in CB fields before and after coarse direction discrimination training. In seven human CB subjects, we measured threshold versus noise functions before and after coarse direction discrimination training in the blind field and at corresponding intact field locations. Threshold versus noise functions were analyzed within the framework of the linear amplifier model and the perceptual template model. Linear amplifier model analysis identified internal noise as a key factor differentiating motion processing across the tested areas, with visual training reducing internal noise in the blind field. Differences in internal noise also explained residual perceptual deficits at retrained locations. These findings were confirmed with perceptual template model analysis, which further revealed that the major residual deficits between retrained and intact field locations could be explained by differences in internal additive noise. There were no significant differences in multiplicative noise or the ability to process external noise. Together, these results highlight the critical role of altered internal noise processing in mediating training-induced visual recovery in CB fields, and may explain residual perceptual deficits relative to intact regions of the visual field.

  13. Investigation of energy transport in DIII-D High-β P EAST-demonstration discharges with the TGLF turbulent and NEO neoclassical transport models

    Science.gov (United States)

    Pan, C.; Staebler, G. M.; Lao, L. L.; Garofalo, A. M.; Gong, X.; Ren, Q.; McClenaghan, J.; Li, G.; Ding, S.; Qian, J.; Wan, B.; Xu, G. S.; Solomon, W.; Meneghini, O.; Smith, S. P.

    2017-03-01

    Energy transport analyses of the DIII-D high-{β\\text{P}} EAST-demonstration discharges have been performed using the TGYRO transport package with the TGLF turbulent and NEO neoclassical transport models under the OMFIT integrated modeling framework. Ion energy transport is shown to be dominated by neoclassical transport and ion temperature profiles predicted by TGYRO agree closely with the experimental measured profiles for these high-{β\\text{P}} discharges. Ion energy transport is largely insensitive to reductions in the E× B flow shear stabilization. The Shafranov shift is shown to play a role in the suppression of the ion turbulent energy transport below the neoclassical level. Electron turbulent energy transport is under-predicted by TGLF and a significant shortfall in the electron energy transport over the whole core plasma is found with TGLF predictions for these high-{β\\text{P}} discharges. TGYRO can successfully predict the experimental ion and electron temperature profiles by artificially increasing the saturated turbulence level for ETG driven modes used in TGLF.

  14. Demonstration of InAlN/AlGaN high electron mobility transistors with an enhanced breakdown voltage by pulsed metal organic chemical vapor deposition

    Energy Technology Data Exchange (ETDEWEB)

    Xue, JunShuai, E-mail: junshuaixue@hotmail.com; Zhang, JinCheng; Hao, Yue [Key Laboratory of Wide Band Gap Semiconductor Materials and Devices, School of Microelectronics, Xidian University, Xi' an 710071 (China)

    2016-01-04

    In this work, InAlN/AlGaN heterostructures employing wider bandgap AlGaN instead of conventional GaN channel were grown on sapphire substrate by pulsed metal organic chemical vapor deposition, where the nominal Al composition in InAlN barrier and AlGaN channel were chosen to be 83% and 5%, respectively, to achieve close lattice-matched condition. An electron mobility of 511 cm{sup 2}/V s along with a sheet carrier density of 1.88 × 10{sup 13 }cm{sup −2} were revealed in the prepared heterostructures, both of which were lower compared with lattice-matched InAlN/GaN due to increased intrinsic alloy disorder scattering resulting from AlGaN channel and compressively piezoelectric polarization in barrier, respectively. While the high electron mobility transistor (HEMT) processed on these structures not only exhibited a sufficiently high drain output current density of 854 mA/mm but also demonstrated a significantly enhanced breakdown voltage of 87 V, which is twice higher than that of reported InAlN/GaN HEMT with the same device dimension, potential characteristics for high-voltage operation of GaN-based electronic devices.

  15. Demonstration of InAlN/AlGaN high electron mobility transistors with an enhanced breakdown voltage by pulsed metal organic chemical vapor deposition

    Science.gov (United States)

    Xue, JunShuai; Zhang, JinCheng; Hao, Yue

    2016-01-01

    In this work, InAlN/AlGaN heterostructures employing wider bandgap AlGaN instead of conventional GaN channel were grown on sapphire substrate by pulsed metal organic chemical vapor deposition, where the nominal Al composition in InAlN barrier and AlGaN channel were chosen to be 83% and 5%, respectively, to achieve close lattice-matched condition. An electron mobility of 511 cm2/V s along with a sheet carrier density of 1.88 × 1013 cm-2 were revealed in the prepared heterostructures, both of which were lower compared with lattice-matched InAlN/GaN due to increased intrinsic alloy disorder scattering resulting from AlGaN channel and compressively piezoelectric polarization in barrier, respectively. While the high electron mobility transistor (HEMT) processed on these structures not only exhibited a sufficiently high drain output current density of 854 mA/mm but also demonstrated a significantly enhanced breakdown voltage of 87 V, which is twice higher than that of reported InAlN/GaN HEMT with the same device dimension, potential characteristics for high-voltage operation of GaN-based electronic devices.

  16. High consistency forming process for paper making. Part 1. A research, development, and demonstration program plan for the US Papermaking Industry. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1980-04-01

    The subject of research, development, and demonstration (RD and D) of energy conserving technologies applicable to papermaking operations downstream of the pulping process is addressed. An RD and D Program Plan is presented based on a survey of leading representatives of the papermaking industry, equipment manufacturers, consulting engineering firms, the American Paper Institute, and the Technical Association of the Pulp and Paper Industry. For perspective, the program plan is presented against the general background of the industry's current issues and concerns. The second part of the paper, Phase I, final report, deals with papermaking test facilities. The case for a centralized test facility is discussed. The results of a survey of existing pilot paper machines are presented. The energy saving potential of high consistency forming is considered and related to existing evidence. Simple theoretical models for the press nip action and the drying process are developed to predict where high consistency forming will reduce energy consumption. A special dynamic former has been designed, fabricated, and commissioned to allow development of a laboratory high consistency headbox. The design and construction of a low speed headbox has been completed and the complete system operated. Special equipment and techniques for the measurement of the water and air permeability of sheet samples have been developed and are described.

  17. IT-Supported International Subsidiary Establishment Process for the Japanese Market: A Case Study on Finnish High Technology SMEs

    OpenAIRE

    Ojala, Arto; Nahar, Nazmun

    2005-01-01

    The large size of the Japanese IT market makes it attractive to and important for foreign high technology companies. However, the Japanese market is very challenging, highly competitive, and difficult to penetrate for foreign small and medium-sized enterprises (SMEs). Most SMEs fail to penetrate into the Japanese market effectively by using modern IT-tools in the international subsidiary establishment process. No earlier in-depth empirical research exists on the IT-sup...

  18. Pilot Demonstration of Technology for the Production of High Value Materials from the Ultra-Fine (PM 2.5) Fraction of Coal Combustion Ash

    Energy Technology Data Exchange (ETDEWEB)

    T.L. Robl; J.G. Groppo; Robert Rathebone

    2005-12-14

    Work on the project focused on the determination of the hydraulic classification characteristics of the Coleman and Mill Creek ashes. The work utilized the hydraulic classifier developed earlier in the project. Testing included total yield, recovery of <5 {micro}m ash diameter particles and LOI partitioning as functions of dispersant dosage and type, retention time and superficial velocity. Yields as high as 21% with recoveries of up to 2/3 of the <5 {micro}m ash fractions were achieved. Mean particle size (D{sub 50}) of varied from 3.7 to 10 {micro}m. The ashes were tested for there pozzolanic activity in mortars as measured by strength activity index using ASTM criteria. Additional testing included air entrainment reagent demand and water requirements. The classified products all performed well, demonstrating excellent early strength development in the mortars. Some increased air entrainment demand was noted. The conceptual design of a process demonstration unit PDU was also completed. A flexible, trailer-mounted field unit is envisioned.

  19. Demonstration of a diode pumped Nd,Y co-doped SrF2 crystal based, high energy chirped pulse amplification laser system

    Science.gov (United States)

    Chen, Junchi; Peng, Yujie; Zhang, Zongxin; Su, Hongpeng; Leng, Yuxin; Jiang, Dapeng; Ma, Fengkai; Qian, Xiaobo; Tang, Fei; Su, Liangbi

    2017-01-01

    We report, to the best of our knowledge, a chirped pulse amplification laser system based on the Nd,Y:SrF2 crystal for the first time. The incorporation of Y3+ nonactive ions can significantly improve laser properties of Nd:SrF2 crystal, including broader emission linewidth, larger cross-section as well as longer fluorescence lifetime. Pulse laser with 5.1 mJ (uncompressed), 3.7 mJ (compressed) energy, 1.6 ps duration at 5 Hz repetition rate is demonstrated. The results indicate that the Nd,Y:SrF2 crystal is a potential candidate with excellent laser and thermal performance for developing ultra-intense laser with high repetition rate.

  20. Simulation studies for a high resolution time projection chamber at the international linear collider

    Energy Technology Data Exchange (ETDEWEB)

    Muennich, A.

    2007-03-26

    The International Linear Collider (ILC) is planned to be the next large accelerator. The ILC will be able to perform high precision measurements only possible at the clean environment of electron positron collisions. In order to reach this high accuracy, the requirements for the detector performance are challenging. Several detector concepts are currently under study. The understanding of the detector and its performance will be crucial to extract the desired physics results from the data. To optimise the detector design, simulation studies are needed. Simulation packages like GEANT4 allow to model the detector geometry and simulate the energy deposit in the different materials. However, the detector response taking into account the transportation of the produced charge to the readout devices and the effects ofthe readout electronics cannot be described in detail. These processes in the detector will change the measured position of the energy deposit relative to the point of origin. The determination of this detector response is the task of detailed simulation studies, which have to be carried out for each subdetector. A high resolution Time Projection Chamber (TPC) with gas amplification based on micro pattern gas detectors, is one of the options for the main tracking system at the ILC. In the present thesis a detailed simulation tool to study the performance of a TPC was developed. Its goal is to find the optimal settings to reach an excellent momentum and spatial resolution. After an introduction to the present status of particle physics and the ILC project with special focus on the TPC as central tracker, the simulation framework is presented. The basic simulation methods and implemented processes are introduced. Within this stand-alone simulation framework each electron produced by primary ionisation is transferred through the gas volume and amplified using Gas Electron Multipliers (GEMs). The output format of the simulation is identical to the raw data from a

  1. 75 FR 3335 - International Fisheries; Western and Central Pacific Fisheries for Highly Migratory Species...

    Science.gov (United States)

    2010-01-21

    ... Endorsements. This is because of the importance under the Convention of a vessel's international radio call... accordance with the NOAA Finance Handbook to recover the administrative costs of administering the permit... business. Response: The referenced requirement applies in the case that the vessel owner and operator have...

  2. Viscoelastic behavior and durability of steel wire - reinforced polyethylene pipes under a high internal pressure

    NARCIS (Netherlands)

    Ivanov, S.; Anoshkin, A.N.; Zuyko, V.Yu

    2011-01-01

    The strength tests of steel-wire-reinforced polyethylene pipe specimens showed that, under a constant internal pressure exceeding 80% of their short-term ultimate pressure, the fracture of the specimens occurred in less than 24 hours. At pressures slightly lower than this level, some specimens did n

  3. "We Don't Recruit, We Educate": High School Program Marketing and International Baccalaureate Programmes

    Science.gov (United States)

    Donovan, Martha K.; Lakes, Richard D.

    2017-01-01

    Public education reformers have created a widespread expectation of school choice among school consumers. School leaders adopt rigorous academic programs, like the International Baccalaureate (IB) Diploma Programme (DP) and Career Programme (CP), to improve their market position in the competitive landscape. While ample research has investigated…

  4. At the European Physical Society (EPS) 1979 International Conference on High Energy Physics

    CERN Multimedia

    1979-01-01

    To mark CERN's 25th Anniversary this year conference was held in Geneva from 27 June to 4 July, at the International Conference Centre. Here is Abdus Salam addressing theorists (on the first raw from left, Viki Weisskopf, Leon Van Hove, Giuliano Preparata).

  5. High-Speed Measurement of the Internal Diameter of Tubes: A Comparison of Methods

    DEFF Research Database (Denmark)

    Gundtoft, Hans Erik; Agerup, C.C.; Nielsen, N.

    1974-01-01

    The authors have compared various methods of tube measurement and have made the striking conclusion that the continuous measurement of the internal diameter of precision tubes with an air gauge is often useless in practice. The methods selected for experiment were all contactless and so included ...... with ultrasonic immersion testing for flaws to make a complete tube testing facility....

  6. International kidney paired donation transplantations to increase kidney transplant of O group and highly sensitized patient: First report from India

    Science.gov (United States)

    Kute, Vivek B; Patel, Himanshu V; Shah, Pankaj R; Modi, Pranjal R; Shah, Veena R; Rizvi, Sayyed J; Pal, Bipin C; Shah, Priya S; Wakhare, Pavan S; Shinde, Saiprasad G; Ghodela, Vijay A; Varyani, Umesh T; Patel, Minaxi H; Trivedi, Varsha B; Trivedi, Hargovind L

    2017-01-01

    AIM To report the first international living related two way kidney paired donation (KPD) transplantation from India which occurred on 17th February 2015 after legal permission from authorization committee. METHODS Donor recipient pairs were from Portugal and India who were highly sensitized and ABO incompatible with their spouse respectively. The two donor recipient pairs had negative lymphocyte cross-matching, flow cross-match and donor specific antibody in two way kidney exchange with the intended KPD donor. Local KPD options were fully explored for Indian patient prior to embarking on international KPD. RESULTS Both pairs underwent simultaneous uneventful kidney transplant surgeries and creatinine was 1 mg/dL on tacrolimus based immunosuppression at 11 mo follow up. The uniqueness of these transplantations was that they are first international KPD transplantations in our center. CONCLUSION International KPD will increases quality and quantity of living donor kidney transplantation. This could be an important step to solving the kidney shortage with additional benefit of reduced costs, improved quality and increased access for difficult to match incompatible pairs like O blood group patient with non-O donor and sensitized patient. To the best of our knowledge this is first international KPD transplantation from India. PMID:28280697

  7. Demonstration of a high-intensity neutron source based on a liquid-lithium target for Accelerator based Boron Neutron Capture Therapy.

    Science.gov (United States)

    Halfon, S; Arenshtam, A; Kijel, D; Paul, M; Weissman, L; Berkovits, D; Eliyahu, I; Feinberg, G; Kreisel, A; Mardor, I; Shimel, G; Shor, A; Silverman, I; Tessler, M

    2015-12-01

    A free surface liquid-lithium jet target is operating routinely at Soreq Applied Research Accelerator Facility (SARAF), bombarded with a ~1.91 MeV, ~1.2 mA continuous-wave narrow proton beam. The experiments demonstrate the liquid lithium target (LiLiT) capability to constitute an intense source of epithermal neutrons, for Accelerator based Boron Neutron Capture Therapy (BNCT). The target dissipates extremely high ion beam power densities (>3 kW/cm(2), >0.5 MW/cm(3)) for long periods of time, while maintaining stable conditions and localized residual activity. LiLiT generates ~3×10(10) n/s, which is more than one order of magnitude larger than conventional (7)Li(p,n)-based near threshold neutron sources. A shield and moderator assembly for BNCT, with LiLiT irradiated with protons at 1.91 MeV, was designed based on Monte Carlo (MCNP) simulations of BNCT-doses produced in a phantom. According to these simulations it was found that a ~15 mA near threshold proton current will apply the therapeutic doses in ~1h treatment duration. According to our present results, such high current beams can be dissipated in a liquid-lithium target, hence the target design is readily applicable for accelerator-based BNCT.

  8. Demonstration of the postcommissural fibres of the fornix in short-inversion time inversion-recovery imaging on a high-field system

    Energy Technology Data Exchange (ETDEWEB)

    Saeki, N.; Kansaku, K.; Higuchi, Y.; Yamaura, A. [Dept. of Neurological Surgery, Chiba University School of Medicine (Japan); Kawano, K.; Iijima, T. [Electrotechnical Lab., Tsukuba (Japan); Inoue, N. [GE Yokagawa Medical Systems, Tokyo (Japan)

    2001-07-01

    Short-inversion time inversion-recovery (STIR) imaging using a 3 tesla system was assessed to reveal the postcommissural fibres (PF) of the fornix, which have rarely been highlighted neuroradiologically in the clinical setting. We studied 27 normal subjects. Sequence parameters were TR/TE/TI 8000/52/150 ms. STIR was expected to take advantage of the high signal-to-noise ratio of a high-field system, due to the long repetition time. PF were identifiable in axial and coronal slices in all cases. They were bordered anteriorly and superiorly by the anterior commissure and posteriorly and inferiorly by the mamillary body. Behind the anterior commissure, they ran in an arch-shaped posterior and inferior course in the hypothalamic nuclei and joined the mamillary body anterolaterally. They usually extended through three 3-mm slices (with 1 mm interslice gap) in anteroposterior and vertical dimensions. Little variation was observed in their course or size. Demonstration of the PF would provide a more detailed correlation of human neuroanatomy to hypothalamic function and individualised understanding of hypothalamic pathology and influence therapy. (orig.)

  9. Orcc's Compa-Backend demonstration

    OpenAIRE

    Oliva, Yaset; Casseau, Emmanuel; Martin, Kevin; Bomel, Pierre; Diguet, Jean-Philippe; Yviquel, Hervé; Raulet, Mickael; Raffin, Erwan; Morin, Laurent

    2014-01-01

    International audience; This paper presents the implementation of a video decoding application starting from its dataflow and CAL representations. Our objective is to demonstrate the ability of the Open RVC-CAL Compiler (Orcc) to generate code for embedded systems. For the demonstration, the video application will be an MPEG-4 Part2 decoder. The targeted architecture is a multi-core heterogeneous system deployed onto the Zynq platform from Xilinx.

  10. High molecular weight FGF2 isoforms demonstrate canonical receptor-mediated activity and support human embryonic stem cell self-renewal

    Directory of Open Access Journals (Sweden)

    Denis Kole

    2017-05-01

    Full Text Available Basic fibroblast growth factor (FGF2 is a highly pleiotropic member of a large family of growth factors with a broad range of activities, including mitogenesis and angiogenesis (Ornitz et al., 1996; Zhang et al., 2006, and it is known to be essential for maintenance of balance between survival, proliferation, and self-renewal in human pluripotent stem cells (Eiselleova et al., 2009; Zoumaro-Djayoon et al., 2011. A single FGF2 transcript can be translated into five FGF2 protein isoforms, an 18 kDa low molecular weight (LMW isoform and four larger high molecular weight (HMW isoforms (Arese et al., 1999; Arnaud et al., 1999. As they are not generally secreted, high molecular weight (HMW FGF2 isoforms have predominantly been investigated intracellularly; only a very limited number of studies have investigated their activity as extracellular factors. Here we report over-expression, isolation, and biological activity of all recombinant human FGF2 isoforms. We show that HMW FGF2 isoforms can support self-renewal of human embryonic stem cells (hESCs in vitro. Exogenous supplementation with HMW FGF2 isoforms also activates the canonical FGFR/MAPK pathway and induces mitogenic activity in a manner similar to that of the 18 kDa FGF2 isoform. Though all HMW isoforms, when supplemented exogenously, are able to recapitulate LMW FGF2 activity to some degree, it appears that certain isoforms tend to do so more poorly, demonstrating a lesser functional response by several measures. A better understanding of isoform-specific FGF2 effects will lead to a better understanding of developmental and pathological FGF2 signaling.

  11. Effects of High Pressure on Internally Self-Assembled Lipid Nanoparticles

    DEFF Research Database (Denmark)

    Kulkarni, Chandrashekhar V; Yaghmur, Anan; Steinhart, Milos;

    2016-01-01

    We present the first report on the effects of hydrostatic pressure on colloidally stabilized lipid nanoparticles enveloping inverse nonlamellar self-assemblies in their interiors. These internal self-assemblies were systematically tuned into bicontinuous cubic (Pn3m and Im3m), micellar cubic (Fd3m......), hexagonal (H2), and inverse micellar (L2) phases by regulating the lipid/oil ratio as the hydrostatic pressure was varied from atmospheric pressure to 1200 bar and back to atmospheric pressure. The effects of pressure on these lipid nanoparticles were compared with those on their equilibrium bulk...... samples, whereas the internal self-assemblies of the corresponding lipid nanoparticles displayed only pressure-modulated single phases. Interestingly, both the lattice parameters and the linear pressure expansion coefficients were larger for the self-assemblies enveloped inside the lipid nanoparticles...

  12. High Disparity Between Orthopedic Resident Interest and Participation in International Health Electives.

    Science.gov (United States)

    Zhang, Steven; Shultz, Paul; Daniels, Alan; Ackelman, Edward; Kamal, Robin N

    2016-07-01

    Few orthopedic surgical residency programs offer international health electives (IHEs). Efforts to expand these programs have been increasing across medical disciplines. Whether orthopedic residents will participate remains unknown. This study quantified and characterized orthopedic resident interest and barriers to IHEs in US residency programs. A web-based survey was administered to residents from 154 US orthopedic residency programs accredited by the Accreditation Council for Graduate Medical Education 2014 to 2015. Questions assessed demographics and program background, previous medical experience abroad, barriers to participation, and level of interest in participating in an international health elective during their training and beyond. Twenty-seven (17.5%) residency programs responded. Chi-square analysis showed that residents who expressed interest in participating were significantly more likely to have experience abroad compared with those who expressed no interest (Porthopedic residencies (POrthopedics. 2016; 39(4):e680-e686.].

  13. PREFACE: XVth International Conference on Calorimetry in High Energy Physics (CALOR2012)

    Science.gov (United States)

    Akchurin, Nural

    2012-12-01

    The XVth International Conference on Calorimetry in High Energy Physics, CALOR2012, was held in Santa Fe, New Mexico from 4-8 June 2012. The series of conferences on calorimetry started in 1990 at Fermilab, and they have been the premier event for calorimeter aficionados, a trend that CALOR2012 upheld. This year, several presentations focused on the status of the major calorimeter systems, especially at the LHC. Discussions on new and developing techniques in calorimetry took a full day. Excellent updates on uses of calorimeters or about ideas that are deeply rooted in particle physics calorimetry in astrophysics and neutrino physics were followed by talks on algorithms and special triggers that rely on calorimeters. Finally, discussions of promising current developments and ongoing R&D work for future calorimeters capped the conference. The field of calorimetry is alive and well, as evidenced by the more than 100 attendees and the excellent quality of over 80 presentations. You will find the written contributions in this volume. The presentations can be found at calor2012.ttu.edu. The first day of the conference was dedicated to the LHC. In two invited talks, Guillaume Unal (CERN) and Tommaso Tabarelli de Fatis (Universita' & INFN Milano Bicocca) discussed the critical role electromagnetic calorimeters play in the hunt for the Standard Model Higgs boson in ATLAS and CMS, respectively. The enhanced sensitivity for light Higgs in the two-gamma decay channel renders electromagnetic calorimeters indispensible. Much of the higher mass region was already excluded for the SM Higgs by the time of this conference, and after less than a month, on 4 July, CERN announced the discovery of a new boson at 125 GeV, a particle that seems consistent with the Higgs particle so far. Once again, without the electromagnetic calorimeters, this would not have been possible. Professor Geoffrey West from the Santa Fe Institute gave the keynote address. His talk, 'Universal Scaling Laws

  14. Angioplasty of symptomatic high-grade internal carotid artery stenosis with intraluminal thrombus: therapeutic approach

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez, A.; Mayol, A. [Seccion de Neurorradiologia Intervencionista, Servicio de Radiologia, Hospital Universitario Virgen del Rocio, Avenida Manuel Siurot s/n, Avenida Manuel Siurot s/n, 41013, Sevilla (Spain); Gil-Peralta, A.; Gonzalez-Marcos, J.R. [Servicio de Neurologia, Hospital Universitario Virgen del Rocio, Avenida Manuel Siurot s/n, 41013, Sevilla (Spain); Boza, F. [Servicio de Neurofisiologia, Hospital Universitario Virgen del Rocio, Avenida Manuel Siurot s/n, 41013, Sevilla (Spain); Ruano, J. [Unidad de Cuidados Intensivos, Hospital Universitario Virgen del Rocio, Avenida Manuel Siurot s/n, 41013, Sevilla (Spain)

    2004-04-01

    Intraluminal thrombus in the internal carotid artery (ICA) is usually found in patients with severe atheromatous stenosis. Having reviewed 300 carotid angioplasties for symptomatic >70% ICA stenosis, we found three patients (1%) with intraluminal thrombus. Conservative treatment with anticoagulants and double antiplatelet coverage can result in lysis of the thrombus without severe risks. Percutaneous transluminal angioplasty and stenting, preferably with distal protection, can be an excellent alternative to carotid endarterectomy. (orig.)

  15. Damage invariant and high security acquisition of the internal fingerprint using optical coherence tomography

    CSIR Research Space (South Africa)

    Darlow, Luke N

    2016-11-01

    Full Text Available as the stratum corneum. Regardless of any advances in this field, this approach to fingerprint acquisition by scanning the surface skin only is restricted by the input data (the condition of the human fingerprint itself) and the representation afforded (a 2D...CIS-2016 Published by Infonomics Society ISBN: 978-1-908320-66-7 34 Epidermis Papillary Junction (Internal Fingerprint) Dermis Stratum Corneum (Surface Fingerprint) 3mm 512 pixels 10...

  16. High-density SNP screening of the major histocompatibility complex in systemic lupus erythematosus demonstrates strong evidence for independent susceptibility regions.

    Directory of Open Access Journals (Sweden)

    Lisa F Barcellos

    2009-10-01

    Full Text Available A substantial genetic contribution to systemic lupus erythematosus (SLE risk is conferred by major histocompatibility complex (MHC gene(s on chromosome 6p21. Previous studies in SLE have lacked statistical power and genetic resolution to fully define MHC influences. We characterized 1,610 Caucasian SLE cases and 1,470 parents for 1,974 MHC SNPs, the highly polymorphic HLA-DRB1 locus, and a panel of ancestry informative markers. Single-marker analyses revealed strong signals for SNPs within several MHC regions, as well as with HLA-DRB1 (global p = 9.99 x 10(-16. The most strongly associated DRB1 alleles were: *0301 (odds ratio, OR = 2.21, p = 2.53 x 10(-12, *1401 (OR = 0.50, p = 0.0002, and *1501 (OR = 1.39, p = 0.0032. The MHC region SNP demonstrating the strongest evidence of association with SLE was rs3117103, with OR = 2.44 and p = 2.80 x 10(-13. Conditional haplotype and stepwise logistic regression analyses identified strong evidence for association between SLE and the extended class I, class I, class III, class II, and the extended class II MHC regions. Sequential removal of SLE-associated DRB1 haplotypes revealed independent effects due to variation within OR2H2 (extended class I, rs362521, p = 0.006, CREBL1 (class III, rs8283, p = 0.01, and DQB2 (class II, rs7769979, p = 0.003, and rs10947345, p = 0.0004. Further, conditional haplotype analyses demonstrated that variation within MICB (class I, rs3828903, p = 0.006 also contributes to SLE risk independent of HLA-DRB1*0301. Our results for the first time delineate with high resolution several MHC regions with independent contributions to SLE risk. We provide a list of candidate variants based on biologic and functional considerations that may be causally related to SLE risk and warrant further investigation.

  17. Demonstration of a Novel, Integrated, Multi-Scale Procedure for High-Resolution 3D Reservoir Characterization and Improved CO2-EOR/Sequestration Management, SACROC Unit

    Energy Technology Data Exchange (ETDEWEB)

    Scott R. Reeves

    2007-09-30

    The primary goal of this project was to demonstrate a new and novel approach for high resolution, 3D reservoir characterization that can enable better management of CO{sub 2} enhanced oil recovery (EOR) projects and, looking to the future, carbon sequestration projects. The approach adopted has been the subject of previous research by the DOE and others, and relies primarily upon data-mining and advanced pattern recognition approaches. This approach honors all reservoir characterization data collected, but accepts that our understanding of how these measurements relate to the information of most interest, such as how porosity and permeability vary over a reservoir volume, is imperfect. Ideally the data needed for such an approach includes surface seismic to provide the greatest amount of data over the entire reservoir volume of interest, crosswell seismic to fill the resolution gap between surface seismic and wellbore-scale measurements, geophysical well logs to provide the vertical resolution sought, and core data to provide the tie to the information of most interest. These data are combined via a series of one or more relational models to enable, in its most successful application, the prediction of porosity and permeability on a vertical resolution similar to logs at each surface seismic trace location. In this project, the procedure was applied to the giant (and highly complex) SACROC unit of the Permian basin in West Texas, one of the world's largest CO{sub 2}-EOR projects and a potentially world-class geologic sequestration site. Due to operational scheduling considerations on the part of the operator of the field, the crosswell data was not obtained during the period of project performance (it is currently being collected however as part of another DOE project). This compromised the utility of the surface seismic data for the project due to the resolution gap between it and the geophysical well logs. An alternative approach was adopted that utilized a

  18. A high throughput method for quantification of cell surface bound and internalized chitosan nanoparticles.

    Science.gov (United States)

    Tammam, Salma N; Azzazy, Hassan M E; Lamprecht, Alf

    2015-11-01

    Chitosan has become a popular polymer for drug delivery. It's hydro solubility and mild formulation conditions have made it an attractive polymer for macromolecular delivery. Accurate quantification of internalized chitosan nanoparticles (NPs) is imperative for fair assessment of the nano-formulation where it is important to determine the exact amount of drug actually being delivered into the cell, especially for macromolecular drugs where cellular entry is limited by molecule size and/or charge. The preferential affinity of wheat germ agglutinin tagged with fluorescein isothiocyanate (WGA-FITC) to chitosan is exploited in the development of a simple and rapid method for the differentiation between and quantification of cell surface bound and internalized chitosan NPs. The percentage of cell surface bound NPs could be easily determined and corrected NP uptake could be calculated accordingly. The developed method is applicable in several cell lines and has successfully been tested with NPs with different sizes (25 and 150nm) and with very low NP concentrations (20μg/mL). The method will allow for the correct evaluation of chitosan NP uptake and could be further used to evaluate chitosan based nanomedicine and provide guidelines on how to modify NPs for enhanced internalization, and improved drug delivery.

  19. Exploration Medical System Demonstration

    Science.gov (United States)

    Rubin, D. A.; Watkins, S. D.

    2014-01-01

    BACKGROUND: Exploration class missions will present significant new challenges and hazards to the health of the astronauts. Regardless of the intended destination, beyond low Earth orbit a greater degree of crew autonomy will be required to diagnose medical conditions, develop treatment plans, and implement procedures due to limited communications with ground-based personnel. SCOPE: The Exploration Medical System Demonstration (EMSD) project will act as a test bed on the International Space Station (ISS) to demonstrate to crew and ground personnel that an end-to-end medical system can assist clinician and non-clinician crew members in optimizing medical care delivery and data management during an exploration mission. Challenges facing exploration mission medical care include limited resources, inability to evacuate to Earth during many mission phases, and potential rendering of medical care by non-clinicians. This system demonstrates the integration of medical devices and informatics tools for managing evidence and decision making and can be designed to assist crewmembers in nominal, non-emergent situations and in emergent situations when they may be suffering from performance decrements due to environmental, physiological or other factors. PROJECT OBJECTIVES: The objectives of the EMSD project are to: a. Reduce or eliminate the time required of an on-orbit crew and ground personnel to access, transfer, and manipulate medical data. b. Demonstrate that the on-orbit crew has the ability to access medical data/information via an intuitive and crew-friendly solution to aid in the treatment of a medical condition. c. Develop a common data management framework that can be ubiquitously used to automate repetitive data collection, management, and communications tasks for all activities pertaining to crew health and life sciences. d. Ensure crew access to medical data during periods of restricted ground communication. e. Develop a common data management framework that

  20. The effect of stratification and topography on high-frequency internal waves in a continental shelf sea

    Science.gov (United States)

    Domina, Anastasiia; Palmer, Matthew; Vlasenko, Vasil; Sharples, Jonathan; Green, Mattias; Stashchuk, Nataliya

    2017-04-01

    Internal gravity waves (IWs) have been recognised as one of the main drivers of climate controlling circulation, sustaining fisheries in shelf seas and CO2-pump system. High frequency IWs are particularly important to internal mixing in the shelf seas, where they contain an enhanced fraction of the available baroclinic energy. The origin, generation mechanism, propagation and spatial distribution of these waves are unfortunately still poorly understood since they are difficult to measure and simulate, and are therefore not represented in the vast majority of ocean and climate models. In this study we aim to increase our understanding of high frequency IWs dynamics in shelf seas through a combination of observational (from moorings and ocean gliders) and modelling methods (MITgcm), and test the hypothesis that "Solitary waves are responsible for driving a large fraction of the vertical diffusivity at the shelf edge and adjacent shelf region". A new high-resolution (50m horizontal) MITgcm configuration is employed to identify the generation and propagation of IWs in a regional shelf sea and subsequently identify internal wave generation hotspots by using calculated Froude number and body force maps. We assess the likely impact of changing seasonal and climate forcing on IWs with a range of different density structures. Our model suggests that under increasing stratification, the IW field becomes more energetic at all frequencies, however the increase in energy is not evenly distributed. While energy in the dominant low frequency IWs increase by 20-40%, energy associated with high frequency waves increases by as much as 90%. These model results are compared to varying stratification scenarios from observations made during 2012 and 2013 to interpret the impact on continental shelf sea IW generation and propagation. We use the results from a turbulence enabled ocean glider to assess the impact that this varying wavefield has on internal mixing, and discuss the

  1. High refractive index silicone gels for simultaneous total internal reflection fluorescence and traction force microscopy of adherent cells.

    Directory of Open Access Journals (Sweden)

    Edgar Gutierrez

    Full Text Available Substrate rigidity profoundly impacts cellular behaviors such as migration, gene expression, and cell fate. Total Internal Reflection Fluorescence (TIRF microscopy enables selective visualization of the dynamics of substrate adhesions, vesicle trafficking, and biochemical signaling at the cell-substrate interface. Here we apply high-refractive-index silicone gels to perform TIRF microscopy on substrates with a wide range of physiological elastic moduli and simultaneously measure traction forces exerted by cells on the substrate.

  2. Inlet Acoustic Data from a High Bypass Ratio Turbofan Rotor in an Internal Flow Component Test Facility

    Science.gov (United States)

    Bozak, Richard F.

    2017-01-01

    In February 2017, aerodynamic and acoustic testing was completed on a scale-model high bypass ratio turbofan rotor, R4, in an internal flow component test facility. The objective of testing was to determine the aerodynamic and acoustic impact of fan casing treatments designed to reduce noise. The baseline configuration consisted of the R4 rotor with a hardwall fan case. Data are presented for a baseline acoustic run with fan exit instrumentation removed to give a clean acoustic configuration.

  3. The Shandong Shidao Bay 200 MWe High-Temperature Gas-Cooled Reactor Pebble-Bed Module (HTR-PM Demonstration Power Plant: An Engineering and Technological Innovation

    Directory of Open Access Journals (Sweden)

    Zuoyi Zhang

    2016-03-01

    Full Text Available After the first concrete was poured on December 9, 2012 at the Shidao Bay site in Rongcheng, Shandong Province, China, the construction of the reactor building for the world's first high-temperature gas-cooled reactor pebble-bed module (HTR-PM demonstration power plant was completed in June, 2015. Installation of the main equipment then began, and the power plant is currently progressing well toward connecting to the grid at the end of 2017. The thermal power of a single HTR-PM reactor module is 250 MWth, the helium temperatures at the reactor core inlet/outlet are 250/750 °C, and a steam of 13.25 MPa/567 °C is produced at the steam generator outlet. Two HTR-PM reactor modules are connected to a steam turbine to form a 210 MWe nuclear power plant. Due to China's industrial capability, we were able to overcome great difficulties, manufacture first-of-a-kind equipment, and realize series major technological innovations. We have achieved successful results in many aspects, including planning and implementing R&D, establishing an industrial partnership, manufacturing equipment, fuel production, licensing, site preparation, and balancing safety and economics; these obtained experiences may also be referenced by the global nuclear community.

  4. Demonstration of selective catalytic reduction technology for the control of nitrogen oxide emissions from high-sulfur, coal-fired boilers

    Energy Technology Data Exchange (ETDEWEB)

    Hinton, W.S.; Powell, C.A.; Maxwell, J.D.

    1993-11-01

    This paper describes the status of the Innovative Clean Coal Technology project to demonstrate SCR technology for reduction of NO{sub x} emissions from flue gas of utility boilers burning US high-sulfur coal. The funding participants are the US Department of Energy (DOE), Southern Company Services, Inc. (SCS), on behalf of the entire Southern Company, Electric Power Research Institute (EPRI), and Ontario Hydro. SCS is the participant responsible for managing all aspects of the project. The project is being conducted on Gulf Power Company`s Plant Crist Unit 5 (75-MW nominal capacity), located near Pensacola, Florida, on US coals that have a sulfur content near 3.0%. The SCR facility treats a 17,400 scfm slip-stream of flue gas and consists of three 2.5-MW (5000 scfm) and six 0.2-MW (400 scfm) SCR reactors. The reactors operate in parallel with commercially available SCR catalysts obtained from vendors throughout the world. The design engineering and construction have been completed, and the startup/shakedown was completed in June 1993. Long-term performance testing began in July 1993 and will be conducted for two years. Test facility description and test plans, as well as start-up issues and preliminary commissioning test results are reported in this paper.

  5. Demonstration of long-pulse acceleration of high power positive ion beam with JT-60 positive ion source in Japan–Korea joint experiment

    Energy Technology Data Exchange (ETDEWEB)

    Kojima, A., E-mail: kojima.atsushi@jaea.go.jp [Japan Atomic Energy Agency, Naka (Japan); Hanada, M. [Japan Atomic Energy Agency, Naka (Japan); Jeong, S.H. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Bae, Y.S. [National Fusion Research Institute, Daejeon (Korea, Republic of); Chang, D.H.; Kim, T.S.; Lee, K.W.; Park, M.; Jung, B.K. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Mogaki, K.; Komata, M.; Dairaku, M.; Kashiwagi, M.; Tobari, H.; Watanabe, K. [Japan Atomic Energy Agency, Naka (Japan)

    2016-01-15

    The long-pulse acceleration of the high-power positive ion beam has been demonstrated with the JT-60 positive ion source in the joint experiment among Japan Atomic Energy Agency (JAEA), Korea Atomic Energy Research Institute (KAERI) and National Fusion Research Institute (NFRI) under the collaboration program for the development of plasma heating and current drive systems. In this joint experiment, the increase of the heat load and the breakdowns induced by the degradation of the beam optics due to the gas accumulation was one of the critical issues for the long-pulse acceleration. As a result of development of the long-pulse operation techniques of the ion source and facilities of the neutral beam test stand in KAERI, 2 MW 100 s beam has been achieved for the first time. The achieved beam performance satisfies the JT-60SA requirement which is designed to be a 1.94 MW ion beam power from an ion source corresponding to total neutral beam power of 20 MW with 24 ion sources. Therefore, it was found that the JT-60 positive ion sources were applicable in the JT-60SA neutral beam injectors. Moreover, because this ion source is planned to be a backup ion source for KSTAR, the operational region and characteristic has been clarified to apply to the KSTAR neutral beam injector.

  6. Real-Time On-Board Airborne Demonstration of High-Speed On-Board Data Processing for Science Instruments (HOPS)

    Science.gov (United States)

    Beyon, Jeffrey Y.; Ng, Tak-Kwong; Davis, Mitchell J.; Adams, James K.; Bowen, Stephen C.; Fay, James J.; Hutchinson, Mark A.

    2015-01-01

    The project called High-Speed On-Board Data Processing for Science Instruments (HOPS) has been funded by NASA Earth Science Technology Office (ESTO) Advanced Information Systems Technology (AIST) program since April, 2012. The HOPS team recently completed two flight campaigns during the summer of 2014 on two different aircrafts with two different science instruments. The first flight campaign was in July, 2014 based at NASA Langley Research Center (LaRC) in Hampton, VA on the NASA's HU-25 aircraft. The science instrument that flew with HOPS was Active Sensing of CO2 Emissions over Nights, Days, and Seasons (ASCENDS) CarbonHawk Experiment Simulator (ACES) funded by NASA's Instrument Incubator Program (IIP). The second campaign was in August, 2014 based at NASA Armstrong Flight Research Center (AFRC) in Palmdale, CA on the NASA's DC-8 aircraft. HOPS flew with the Multifunctional Fiber Laser Lidar (MFLL) instrument developed by Excelis Inc. The goal of the campaigns was to perform an end-to-end demonstration of the capabilities of the HOPS prototype system (HOPS COTS) while running the most computationally intensive part of the ASCENDS algorithm real-time on-board. The comparison of the two flight campaigns and the results of the functionality tests of the HOPS COTS are presented in this paper.

  7. High-performance liquid chromatofocusing and column affinity chromatography of in vitro 14C-glycated human serum albumin. Demonstration of a glycation-induced anionic heterogeneity.

    Science.gov (United States)

    Vidal, P; Deckert, T; Hansen, B; Welinder, B S

    1989-08-04

    High-performance liquid chromatofocusing of human serum albumin (HSA) after in vitro glycation with purified [14C]glucose has shown that with increasing glycation time a progressive increase in two major anionic fractions (pI 4.8 and 4.65) occurs, while the pI 4.9 fraction decreases in parallel. As early as after 5 days of glycation time, the [14C]glucose content in the anionic fractions was markedly higher than in the pI 4.9 fraction. After 10 and 15 days of glycation, a considerable heterogeneity of 10-15 components could be demonstrated. In addition, phenyl-boronic acid (PBA) affinity chromatography was applied and an enrichment of the more glycated species could be obtained using this method. We conclude that, in contrast to previous reports, glycation of HSA induces anionic heterogeneity (in accordance with the theoretically expected loss of positively charged amino groups) and, although the efficiency in separating non-glycated from monoglycated HSA was found to be very low, an enrichment of these anionic species can be achieved using PBA affinity chromatography.

  8. Characterization of chicken octamer-binding proteins demonstrates that POU domain-containing homeobox transcription factors have been highly conserved during vertebrate evolution

    Energy Technology Data Exchange (ETDEWEB)

    Petryniak, B.; Postema, C.E.; McCormack, W.T.; Thompson, C.B. (Univ. of Michigan Medical Center, Ann Arbor (USA)); Staudt, L.M. (National Cancer Institute, Bethesda, MD (USA))

    1990-02-01

    The DNA sequence motif ATTTGCAT (octamer) or its inverse complement has been identified as an evolutionarily conserved element in the promoter region of immunoglobulin genes. Two major DNA-binding proteins that bind in a sequence-specific manner to the octamer DNA sequence have been identified in mammalian species--a ubiquitously expressed protein (Oct-1) and a lymphoid-specific protein (Oct-2). During characterization of the promoter region of the chicken immunoglobulin light chain gene, the authors identified two homologous octamer-binding proteins in chicken B cells. when the cloning of the human gene for Oct-2 revealed it to be a member of a distinct family of homeobox genes, they sought to determine if the human Oct-2 cDNA could be used to identify homologous chicken homeobox genes. Using a human Oct-2 homeobox-specific DNA probe, they were able to identify 6-10 homeobox-containing genes in the chicken genome, demonstrating that the Oct-2-related subfamily of homeobox genes exists in avian species. DNA sequence analysis revealed it to be the chicken homologue of the human Oct-1 gene. Together, the data show that the POU-containing subfamily of homeobox genes have been highly conserved during vertebrate evolution, apparently as a result of selection for their DNA-binding and transcriptional regulatory properties.

  9. Physical contributors to glenohumeral internal rotation deficit in high school baseball players

    Institute of Scientific and Technical Information of China (English)

    Elizabeth E. Hibberd; Casey E. Shutt; Sakiko Oyama; J. Troy Blackburn; Joseph B. Myers

    2015-01-01

    Background: Glenohumeral internal rotation deficit (GIRD) is a risk factor for shoulder and elbow injury in baseball players. Although this evidence forms a basis for recommending stretching, clinical measures of internal rotation range of motion (ROM) do not differentiate if GIRD is due to muscular, capsuloligamentous, or osseous factors. Understanding the contributions of these structures to GIRD is important for the development of targeted interventions. We hypothesize that the osseous component will have the greatest relative contribution to GIRD, followed by muscle stiffness and posterior capsule thickness. Methods:Internal rotation ROM, muscle stiffness (teres minor, infraspinatus, and posterior deltoid), posterior capsule thickness, and humeral retrotorsion were evaluated on 156 baseball players. A side-to-side difference was calculated for each variable. Variables were entered into a multivariable linear regression to determine the significant predictors of GIRD. Results:The regression model was statistically significant (R2=0.134, F(1, 156)=24.0, p<0.01) with only humeral retrotorsion difference remaining as a significant predictor (β=-0.243, t156=-4.9, p<0.01). A greater humeral retrotorsion side-to-side difference was associated with more GIRD. Conclusion:Humeral retrotorsion accounted for 13.3%of the variance in GIRD. The stiffness of the superficial shoulder muscles and capsular thickness, as measured in this study, were not predictors of GIRD. Factors not assessed in this study, such as deeper muscle stiffness, capsule/ligament laxity, and neuromuscular regulation of muscle stiffness may also contribute to GIRD. Since it is the largest contributor to GIRD, causes of changes in humeral retrotorsion need to be identified. The osseous component only accounted for 13.3% of the variance in GIRD, indicating a large contribution from soft tissues factors that were not addressed in this study. These factors need to be identified to develop evidence

  10. Nontumorous enlargement of the internal auditory canal. A risk factor for sensorineural hearing loss? A high resolution CT-study

    Energy Technology Data Exchange (ETDEWEB)

    Stimmer, H.; Rummeny, E.J. [Technical University Munich, Klinikum rechts der Isar (Germany). Dept. of Radiology; Niedermeyer, H.P. [Technical University Munich, Klinikum rechts der Isar (Germany). ENT-Clinic; Kehl, V. [Technical University Munich, Klinikum rechts der Isar (Germany). Inst. for Medical Statistics and Epidemiology

    2015-06-15

    First aim of the study was to define normal shape and diameter of the internal auditory canal (IAC). In the second part the clinical relevance of IAC-enlargement was analyzed, considering also lesions of the subtle structures at the fundus of the internal auditory canal. 440 high resolution CT-scans of the temporal bone were used for retrospective analysis of the internal auditory canal and its fundus region. The mean value of the IAC diameter in axial and coronal plane was determined. In 20 of 440 patients IAC enlargement was found. In the group with pronounced enlargement (3fold SD) nearly all patients suffered from hearing impairment. In some of them we found structural abnormalities near the IAC fundus in the CSF/perilymph border zone. A new CT-based definition of normal shape and diameter of the internal auditory canal is presented. There is some evidence that a pathologic transmission of CSF-pressure in case of IAC-enlargement and/or abnormal fistulous communications could play an important role in the pathophysiology of hearing loss.

  11. High frequency (hourly) variation in vertical distribution and abundance of meroplanktonic larvae in nearshore waters during strong internal tidal forcing

    Science.gov (United States)

    Liévana MacTavish, A.; Ladah, L. B.; Lavín, M. F.; Filonov, A.; Tapia, Fabian J.; Leichter, J.

    2016-04-01

    We related the vertical distribution and abundance of nearshore meroplankton at hourly time scales with internal tidal wave events. We proposed that significant changes in plankter abundance would occur across internal tidal fronts, and that surface and bottom strata would respond in opposite fashions. First-mode internal tidal bores propagating in the alongshore direction were detected in water-column currents and baroclinic temperature changes. Surface and bottom currents always flowed in opposite directions, and abrupt flow reversals coincided with large temperature changes during arrival of bores. Crab zoeae and barnacle cyprids were more abundant in the bottom strata, whereas barnacle nauplii showed the opposite pattern. Significant changes in vertical distribution and abundance of target meroplankters occurred across internal tidal fronts, especially for crabs at depth, with surface and bottom organisms responding in opposite fashions. Changes in plankter abundance were significantly correlated with current flows in the strata where they were most abundant. The manner in which plankters were affected (increasing or decreasing abundance) appeared to be modulated by their vertical position within the water column. The significant differences found at the high frequencies of this study, maintained across sampling days, suggest that nearshore meroplankton populations may have greater and more consistent temporal and vertical variability than previously considered.

  12. Rational design of MnO/carbon nanopeapods with internal void space for high-rate and long-life li-ion batteries.

    Science.gov (United States)

    Jiang, Hao; Hu, Yanjie; Guo, Shaojun; Yan, Chaoyi; Lee, Pooi See; Li, Chunzhong

    2014-06-24

    Searching the long-life MnO-based materials for lithium ion batteries (LIBs) is still a great challenge because of the issue related to the volumetric expansion of MnO nanoparticles (NPs) or nanowires (NWs) during lithiation. Herein, we demonstrate an unexpected result that a peapod-like MnO/C heterostructure with internal void space can be facilely prepared by annealing the MnO precursor (MnO-P) NW/polydopamine core/shell nanostructure in an inert gas, which is very different from the preparation of typical MnO/C core/shell NWs through annealing MnO NW/C precursor nanostructure. Such peapod-like MnO/C heterostructure with internal void space is highly particular for high-performance LIBs, which can address all the issues related to MnO dissolution, conversion, aggregation and volumetric expansion during the Li(+) insertion/extraction. They are highly stable anode material for LIBs with a very high reversible capacity (as high as 1119 mAh g(-1) at even 500 mA g(-1)) and fast charge and discharge capability (463 mAh g(-1) at 5000 mA g(-1)), which is much better than MnO NWs (38 mAh g(-1) at 5000 mA g(-1)) and MnO/C core/shell NWs (289 mAh g(-1) at 5000 mA g(-1)). Such nanopeapods also show excellent rate capability (charged to 91.6% in 10.6 min using the constant current mode). Most importantly, we found that MnO/C nanopeapods show no capacity fading even after 1000 cycles at a high current density of 2000 mA g(-1), and no morphology change. The present MnO/C nanopeapods are the most efficient MnO-based anode materials ever reported for LIBs.

  13. Demonstration of trivalent actinide partitioning from simulated high-level liquid waste using modifier-free unsymmetrical diglycolamide in n-dodecane

    Energy Technology Data Exchange (ETDEWEB)

    Nayak, P.K.; Kumaresan, R.; Venkatesan, K.A.; Subramanian, G.G.S.; Rajeswari, S.; Antony, M.P.; Vasudeva Rao, P.R. [Indira Gandhi Centre for Atomic Research, Kalpakkam (India). Fuel Chemistry Div.; Chaurasia, Shivkumar; Bhanage, B.M. [Institute of Chemical Technology, Mumbai (India)

    2015-07-01

    Partitioning of trivalent americium from fast-reactor (FR) simulated high-level liquid waste (SHLLW) has been demonstrated, for the first time, using a modifier-free organic phase containing an unsymmetrical diglycolamide, N,N,-didodecyl-N',N'-dioctyl-3-oxapentane-1,5-diamide (D{sup 3}DODGA), in n-dodecane (n-DD). The extraction behavior of various metal ions present in the FR-SHLLW that contained about 3.2 g/L of trivalent metal ions (Am(III) and Ln(III)) was studied using a solution of 0.1 M D{sup 3}DODGA/n-DD, by batch equilibration mode. The extraction of Am(III) was accompanied by the co-extraction of all lanthanides and unwanted metal ions such as Zr(IV), Y(III), and Pd(II) from FR-SHLLW. The co-extraction of unwanted metal ions was minimized by adding a suitable aqueous soluble complexing agents to FR-SHLLW, prior to extraction. As a result, trans-1,2-diaminocyclohexane-N,N,N'N'-tetraacetic acid (CyDTA) was identified as an appropriate reagent for preventing the extraction of zirconium and palladium, that posed problems during recovery of trivalent metal ions from the loaded organic phase. The stripping of behavior of Am(III) and Ln(III) from the loaded organic phase was studied using dilute nitric acid in batch equilibration mode. Based on those results, a counter-current mixer-settler run was performed in a 20-stage mixer-settler. About 99.9% of Am(III), Ln(III) and Y(III) from FR-SHLLW in 0.1 M D{sup 3}DODGA/n-DD was achieved in 20 contacts and the recovery of Am(III) and other trivalents from the loaded organic phase was achieved in 5 contacts using 0.01 M nitric acid. The study demonstrated the possibility of using the modifier-free reagent, D{sup 3}DODGA, for the separation of trivalent actinides from FR-SHLLW.

  14. The Jules Horowitz Reactor - A new High Performance European Material Testing Reactor open to International Users Present Status and Objectives

    Energy Technology Data Exchange (ETDEWEB)

    Iracane, Daniel; Bignan, Gilles [CEA Atomic Energy Commission Saclay Batiment 121- 91191 Gif Sur Yvette (France); Lindbaeck, Jan-Erik; Blomgren, Jan [VATTENFALL AB Nuclear Power Jaemtlandsgatan 99 SE-16287 Stockholm (Sweden)

    2010-07-01

    The development of sustainable nuclear energy requires R and D on fuel and material behaviour under irradiation with a high level of performance in order to meet the needs and challenges for the benefit of industry, research and public bodies. These stakes require a sustainable and secured access to an up-to-date high performance Material Testing Reactor. Following a broad survey within the European Research Area, the international community agreed that the need for Material Test Reactors in support of nuclear power plant safety and operation will continue in the context of sustainable nuclear energy. The Jules Horowitz Reactor project (JHR) copes with this context. JHR is designed as a user facility addressing the needs of the international community. This means: - flexibility with irradiation loops able to reproduce a large variation in operation conditions of different power reactor technologies, - high flux capacity to address Generations II, III, and IV needs. JHR is designed, built and operated as an international user facility because: - Given the maturity and globalization of the industry, domestic tools have no more the required level of economic and technical efficiency. Meanwhile, countries with nuclear energy need an access to high performance irradiation experimental capabilities to support technical skill and guarantee the competitiveness and safety of nuclear energy. - Many research items related to safety or public policy (waste management, etc.) require international cooperation to share costs and benefits of resulting consensus. JHR design is optimised for offering high performance material and fuel irradiation capability for the coming decades. This project is driven and funded by an international consortium gathering vendors, utilities and public stakeholders. This consortium has been set up in March 2007 when the construction began. The construction is in progress and the start of operation is scheduled for 2014. The JHR is a research

  15. First Detections of the [N II] 122 micron Line at High Redshift: Demonstrating the Utility of the Line for Studying Galaxies in the Early Universe

    Science.gov (United States)

    Ferkinhoff, Carl; Brisbin, Drew; Nikola, Thomas; Parshley, Stephen C.; Stacey, Gordon J.; Phillips, Thomas G.; Falgarone, Edith; Benford, Dominic J.; Staguhn, Johannes G.; Tucker, Carol E.

    2011-01-01

    We report the first detections of the [N II] 122 micron line from a high-redshift galaxy. The line was strongly (>6(sigma)) detected from SMMJ02399-0136, and H1413 + 117 (the Cloverleaf QSO) using the Redshift (zeta) and Early Universe Spectrometer on the Caltech Submillimeter Observatory. The lines from both sources are quite bright with line to far-infrared (FIR) continuum luminosity ratios that are approx.7.0 x 10(exp -4) (Cloverleaf) and 2.1 x 10(exo -3) (SMMJ02399). With ratios 2-10 times larger than the average value for nearby galaxies, neither source exhibits the line to continuum deficits seen in nearby sources. The line strengths also indicate large ionized gas fractions, approx.8%-17% of the molecUlar gas mass. The [O III]/[N II] line ratio is very sensitive to the effective temperature of ionizing stars and the ionization parameter for emission arising in the narrow-line region (NLR) of an active galactic nucleus (AGN). Using Our previous detection of the [O III] 88 micron line, the [O III]/[N II]line ratio for SMMJ02399-0136 indicates that the dominant source of the line emission is either stellar H II regions ionized by O9.5 stars, or the NLR of the AGN with ionization parameter log(U) = -3.3 to -4.0. A composite system, where 30%-50% of the FIR lines arise in the NLR also matches the data. The Cloverleaf is best modeled by a superposition of approx.200 M82-like starbursts accounting for all of the FIR emission and 43% of the [N II]line. The remainder may come from the NLR. This war!< demonstrates the utility of the [N II] and [O III] lines in constraining properties of the ionized medium.

  16. First Detections of the [NII] 122 Micrometer Line at High Redshift: Demonstrating the Utility of the Line for Studying Galaxies in the Early Universe

    Science.gov (United States)

    Ferkinhoff, Carl; Brisbin, Drew; Nikola, Thomas; Parshley, Stephen C.; Stacey, Gordon J.; Phillips, Thomas G.; Falgarone, Edith; Benford, Dominic J.; Staguhn, Johannes G.; Tucker, Carol E.

    2011-01-01

    We report the first detections of the [NIl] 122 {\\mu} m line from a high redshift galaxy. The line was strongly (> 6{\\sigma}) detected from SMMJ02399-0136, and HI413+ 117 (the Cloverleaf QSO) using the Redshift(z) and Early Universe Spectrometer (ZEUS) on the CSO. The lines from both sources are quite bright with line-to-FIR continuum luminosity ratios that are approx.7.0x10(exp -4) (Cloverleaf) and 2.1x10(exp -3) (SMMJ02399). With ratios 2-10 times larger than the average value for nearby galaxies, neither source exhibits the line-to-continuum deficits seen in nearby sources. The line strengths also indicate large ionized gas fractions, approx.8 to 17% of the molecular gas mass. The [OIII]/[NII] line ratio is very sensitive to the effective temperature of ionizing stars and the ionization parameter for emission arising in the narrow-line region (NLR) of an AGN. Using our previous detection of the [01II] 88 {\\mu}m line, the [OIII]/ [NIl] line ratio for SMMJ02399-0136 indicates the dominant source of the line emission is either stellar HII regions ionized by 09.5 stars, or the NLR of the AGN with ionization parameter 10g(U) = -3.3 to -4.0. A composite system, where 30 to 50% of the FIR lines arise in the NLR also matches the data. The Cloverleaf is best modeled by a superposition of approx.200 M82like starbursts accounting for all of the FIR emission and 43% of the [NIl] line. The remainder may come from the NLR. This work demonstrates the utility of the [NIl] and [OIII] lines in constraining properties of the ionized medium.

  17. Strand Invasion Based Amplification (SIBA®: a novel isothermal DNA amplification technology demonstrating high specificity and sensitivity for a single molecule of target analyte.

    Directory of Open Access Journals (Sweden)

    Mark J Hoser

    Full Text Available Isothermal nucleic acid amplification technologies offer significant advantages over polymerase chain reaction (PCR in that they do not require thermal cycling or sophisticated laboratory equipment. However, non-target-dependent amplification has limited the sensitivity of isothermal technologies and complex probes are usually required to distinguish between non-specific and target-dependent amplification. Here, we report a novel isothermal nucleic acid amplification technology, Strand Invasion Based Amplification (SIBA. SIBA technology is resistant to non-specific amplification, is able to detect a single molecule of target analyte, and does not require target-specific probes. The technology relies on the recombinase-dependent insertion of an invasion oligonucleotide (IO into the double-stranded target nucleic acid. The duplex regions peripheral to the IO insertion site dissociate, thereby enabling target-specific primers to bind. A polymerase then extends the primers onto the target nucleic acid leading to exponential amplification of the target. The primers are not substrates for the recombinase and are, therefore unable to extend the target template in the absence of the IO. The inclusion of 2'-O-methyl RNA to the IO ensures that it is not extendible and that it does not take part in the extension of the target template. These characteristics ensure that the technology is resistant to non-specific amplification since primer dimers or mis-priming are unable to exponentially amplify. Consequently, SIBA is highly specific and able to distinguish closely-related species with single molecule sensitivity in the absence of complex probes or sophisticated laboratory equipment. Here, we describe this technology in detail and demonstrate its use for the detection of Salmonella.

  18. Beam-test results of 4k pixel CMOS MAPS and high resistivity striplet detectors equipped with digital sparsified readout in the Slim5 low mass silicon demonstrator

    Energy Technology Data Exchange (ETDEWEB)

    Villa, M., E-mail: villa@bo.infn.i [Universita degli Studi di Bologna and INFN-Bologna (Italy); Bruschi, M.; Di Sipio, R.; Fabbri, L.; Giacobbe, B.; Gabrielli, A.; Giorgi, F.; Pellegrini, G.; Sbarra, C.; Semprini, N.; Spighi, R.; Valentinetti, S.; Zoccoli, A. [Universita degli Studi di Bologna and INFN-Bologna (Italy); Avanzini, C.; Batignani, G.; Bettarini, S.; Bosi, F.; Calderini, G.; Ceccanti, M.; Cenci, R. [Universita degli Studi di Pisa and INFN-Pisa (Italy)

    2010-05-21

    The results obtained by the Slim5 collaboration on a low material budget tracking silicon demonstrator put on a 12 GeV/c proton test beam at CERN are reported. Inside a reference telescope, two different and innovative detectors were placed for careful tests. The first was a 4k-Pixel Matrix of Deep N Well MAPS, developed in a 130 nm CMOS Technology, square pixels 50{mu}m wide, thinned down to 100{mu}m and equipped with a digital sparsified readout running up to 50 MHz. The other was a high resistivity double sided silicon detector, 200{mu}m thick, with short strips with 50{mu}m pitch at 45{sup 0} angle to the detector's edge. The detectors were equipped with dedicated fast readout architectures performing on-chip data sparsification and providing the timing information for the hits. The criteria followed in the design of the pixel sensor and of the pixel readout architecture will be reviewed. Preliminary measurements of the pixel charge collection, track detection efficiencies and resolutions of pixel and strip sensors are discussed. The data driven architecture of the readout chips has been fully exploited in the test beam by a data acquisition system able to collect on electronic board up to 2.5 Million events per second before triggering. By using a dedicated Associative Memory board, we were able to perform a level 1 trigger system, with minimal latency, identifying cleanly tracks traversing the detectors. System architecture and main performances are shown.

  19. First Detections of the [N II] 122 micron Line at High Redshift: Demonstrating the Utility of the Line for Studying Galaxies in the Early Universe

    Science.gov (United States)

    Ferkinhoff, Carl; Brisbin, Drew; Nikola, Thomas; Parshley, Stephen C.; Stacey, Gordon J.; Phillips, Thomas G.; Falgarone, Edith; Benford, Dominic J.; Staguhn, Johannes G.; Tucker, Carol E.

    2011-01-01

    We report the first detections of the [N II] 122 micron line from a high-redshift galaxy. The line was strongly (>6(sigma)) detected from SMMJ02399-0136, and H1413 + 117 (the Cloverleaf QSO) using the Redshift (zeta) and Early Universe Spectrometer on the Caltech Submillimeter Observatory. The lines from both sources are quite bright with line to far-infrared (FIR) continuum luminosity ratios that are approx.7.0 x 10(exp -4) (Cloverleaf) and 2.1 x 10(exo -3) (SMMJ02399). With ratios 2-10 times larger than the average value for nearby galaxies, neither source exhibits the line to continuum deficits seen in nearby sources. The line strengths also indicate large ionized gas fractions, approx.8%-17% of the molecUlar gas mass. The [O III]/[N II] line ratio is very sensitive to the effective temperature of ionizing stars and the ionization parameter for emission arising in the narrow-line region (NLR) of an active galactic nucleus (AGN). Using Our previous detection of the [O III] 88 micron line, the [O III]/[N II]line ratio for SMMJ02399-0136 indicates that the dominant source of the line emission is either stellar H II regions ionized by O9.5 stars, or the NLR of the AGN with ionization parameter log(U) = -3.3 to -4.0. A composite system, where 30%-50% of the FIR lines arise in the NLR also matches the data. The Cloverleaf is best modeled by a superposition of approx.200 M82-like starbursts accounting for all of the FIR emission and 43% of the [N II]line. The remainder may come from the NLR. This war!< demonstrates the utility of the [N II] and [O III] lines in constraining properties of the ionized medium.

  20. Sustaining School Improvement through an External and Internal Focus: A Case Study of a High-Need Secondary School in Nepal

    Science.gov (United States)

    Gautam, Chetanath; Alford, Betty J.; Khanal, Manju

    2015-01-01

    A study of a high-need school in Nepal was conducted by members of the International School Leadership Development Network (ISLDN) using the interview protocol developed by members of the high-need school strand of ISLDN. The International School Leadership Development Network is sponsored by the University Council for Educational Administration…