WorldWideScience

Sample records for demonstrated continuing support

  1. Palpability Support Demonstrated

    DEFF Research Database (Denmark)

    Brønsted, Jeppe; Grönvall, Erik; Fors, David

    2007-01-01

    is based on the Active Surfaces concept in which therapists rehabilitate physically and mentally impaired children by means of an activity that stimulates the children both physically and cognitively. In this paper we demonstrate how palpability can be supported in a prototype of the Active Surfaces...

  2. Decision support software technology demonstration plan

    Energy Technology Data Exchange (ETDEWEB)

    SULLIVAN,T.; ARMSTRONG,A.

    1998-09-01

    The performance evaluation of innovative and alternative environmental technologies is an integral part of the US Environmental Protection Agency's (EPA) mission. Early efforts focused on evaluating technologies that supported the implementation of the Clean Air and Clean Water Acts. In 1986 the Agency began to demonstrate and evaluate the cost and performance of remediation and monitoring technologies under the Superfund Innovative Technology Evaluation (SITE) program (in response to the mandate in the Superfund Amendments and Reauthorization Act of 1986 (SARA)). In 1990, the US Technology Policy was announced. This policy placed a renewed emphasis on making the best use of technology in achieving the national goals of improved quality of life for all Americans, continued economic growth, and national security. In the spirit of the technology policy, the Agency began to direct a portion of its resources toward the promotion, recognition, acceptance, and use of US-developed innovative environmental technologies both domestically and abroad. Decision Support Software (DSS) packages integrate environmental data and simulation models into a framework for making site characterization, monitoring, and cleanup decisions. To limit the scope which will be addressed in this demonstration, three endpoints have been selected for evaluation: Visualization; Sample Optimization; and Cost/Benefit Analysis. Five topics are covered in this report: the objectives of the demonstration; the elements of the demonstration plan; an overview of the Site Characterization and Monitoring Technology Pilot; an overview of the technology verification process; and the purpose of this demonstration plan.

  3. Security Support in Continuous Deployment Pipeline

    DEFF Research Database (Denmark)

    Ullah, Faheem; Raft, Adam Johannes; Shahin, Mojtaba

    2017-01-01

    Continuous Deployment (CD) has emerged as a new practice in the software industry to continuously and automatically deploy software changes into production. Continuous Deployment Pipeline (CDP) supports CD practice by transferring the changes from the repository to production. Since most of the C...

  4. Demonstration of Decision Support Tools for Sustainable Development

    Energy Technology Data Exchange (ETDEWEB)

    Shropshire, David Earl; Jacobson, Jacob Jordan; Berrett, Sharon; Cobb, D. A.; Worhach, P.

    2000-11-01

    The Demonstration of Decision Support Tools for Sustainable Development project integrated the Bechtel/Nexant Industrial Materials Exchange Planner and the Idaho National Engineering and Environmental Laboratory System Dynamic models, demonstrating their capabilities on alternative fuel applications in the Greater Yellowstone-Teton Park system. The combined model, called the Dynamic Industrial Material Exchange, was used on selected test cases in the Greater Yellow Teton Parks region to evaluate economic, environmental, and social implications of alternative fuel applications, and identifying primary and secondary industries. The test cases included looking at compressed natural gas applications in Teton National Park and Jackson, Wyoming, and studying ethanol use in Yellowstone National Park and gateway cities in Montana. With further development, the system could be used to assist decision-makers (local government, planners, vehicle purchasers, and fuel suppliers) in selecting alternative fuels, vehicles, and developing AF infrastructures. The system could become a regional AF market assessment tool that could help decision-makers understand the behavior of the AF market and conditions in which the market would grow. Based on this high level market assessment, investors and decision-makers would become more knowledgeable of the AF market opportunity before developing detailed plans and preparing financial analysis.

  5. Supporting curriculum development by visualizing a continuous learning pathway

    NARCIS (Netherlands)

    Schoonenboom, Judith; Oud, Wil

    2006-01-01

    Please, cite this publication as: Schoonenboom, J., & Oud, W. (2006). Supporting curriculum development by visualizing a continuous learning pathway. Proceedings of International Workshop in Learning Networks for Lifelong Competence Development, TENCompetence Conference. March 30th-31st, Sofia, Bulg

  6. Goal-oriented requirement engineering support for business continuity planning

    OpenAIRE

    Arenas, Alvaro; Massonet, Philippe; Ponsard, Christophe; Aziz, Benjamin

    2015-01-01

    Business continuity is a key management process that aims to maintain and rapidly recover an organizations key business functions in the face of serious incidents. The resulting business continuity plan must identify the key business functions that must be resilient, define recovery of critical business functions and define contingency measures when recovery is not possible. This paper argues that the process of business continuity planning can be efficiently supported by a goal-oriented requ...

  7. Supporting relationships between family and staff in continuing care settings.

    Science.gov (United States)

    Austin, Wendy; Goble, Erika; Strang, Vicki; Mitchell, Agnes; Thompson, Elizabeth; Lantz, Helen; Balt, Linda; Lemermeyer, Gillian; Vass, Kelly

    2009-08-01

    In this Canadian study, a participatory action research approach was used to examine the relationships between families of residents of traditional continuing care facilities and the health care team. The objectives were to (a) explore the formation and maintenance of family-staff relationships, with attention paid to the relational elements of engagement and mutual respect; (b) explore family and staff perspectives of environmental supports and constraints; and (c) identify practical ways to support and enhance these relationships. Results indicate that the resource-constrained context of continuing care has directly impacted family and staff relationships. The nature of these relationships are discussed using the themes of "Everybody Knows Your Name," "Loss and Laundry," "It's the Little Things That Count," and "The Chasm of Us Versus Them." Families' and staff's ideas of behaviors that support or undermine relationships are identified, as are concrete suggestions for improving family- staff relationships in traditional continuing care settings in Canada.

  8. Non-unity molecular heritability demonstrated by continuous evolution in vitro

    Science.gov (United States)

    Schmitt, T.; Lehman, N.

    1999-01-01

    INTRODUCTION: When catalytic RNA is evolved in vitro, the molecule's chemical reactivity is usually the desired selection target. Sometimes the phenotype of a particular RNA molecule cannot be unambiguously determined from its genotype, however. This can occur if a nucleotide sequence can adopt multiple folded states, an example of non-unity heritability (i.e. one genotype gives rise to more than one phenotype). In these cases, more rounds of selection are required to achieve a phenotypic shift. We tested the influence of non-unity heritability at the molecular level by selecting for variants of a ligase ribozyme via continuous evolution. RESULTS: During 20 bursts of continuous evolution of a 152-nucleotide ligase ribozyme in which the Mg2+ concentration was periodically lowered, a nine-error variant of the starting 'wild-type' molecule became dominant in the last eight bursts. This variant appears to be more active than the wild type. Kinetic analyses of the mutant suggest that it may not possess a higher first-order catalytic rate constant, however. Examination of the multiple RNA conformations present under the continuous evolution conditions suggests that the mutant is superior to the wild type because it is less likely to misfold into inactive conformers. CONCLUSIONS: The evolution of genotypes that are more likely to exhibit a particular phenotype is an epiphenomenon usually ascribed only to complex living systems. We show that this can occur at the molecular level, demonstrating that in vitro systems may have more life-like characteristics than previously thought, and providing additional support for an RNA world.

  9. Non-unity molecular heritability demonstrated by continuous evolution in vitro

    Science.gov (United States)

    Schmitt, T.; Lehman, N.

    1999-01-01

    INTRODUCTION: When catalytic RNA is evolved in vitro, the molecule's chemical reactivity is usually the desired selection target. Sometimes the phenotype of a particular RNA molecule cannot be unambiguously determined from its genotype, however. This can occur if a nucleotide sequence can adopt multiple folded states, an example of non-unity heritability (i.e. one genotype gives rise to more than one phenotype). In these cases, more rounds of selection are required to achieve a phenotypic shift. We tested the influence of non-unity heritability at the molecular level by selecting for variants of a ligase ribozyme via continuous evolution. RESULTS: During 20 bursts of continuous evolution of a 152-nucleotide ligase ribozyme in which the Mg2+ concentration was periodically lowered, a nine-error variant of the starting 'wild-type' molecule became dominant in the last eight bursts. This variant appears to be more active than the wild type. Kinetic analyses of the mutant suggest that it may not possess a higher first-order catalytic rate constant, however. Examination of the multiple RNA conformations present under the continuous evolution conditions suggests that the mutant is superior to the wild type because it is less likely to misfold into inactive conformers. CONCLUSIONS: The evolution of genotypes that are more likely to exhibit a particular phenotype is an epiphenomenon usually ascribed only to complex living systems. We show that this can occur at the molecular level, demonstrating that in vitro systems may have more life-like characteristics than previously thought, and providing additional support for an RNA world.

  10. 40 CFR 63.9808 - How do I monitor and collect data to demonstrate continuous compliance?

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 14 2010-07-01 2010-07-01 false How do I monitor and collect data to demonstrate continuous compliance? 63.9808 Section 63.9808 Protection of Environment ENVIRONMENTAL PROTECTION... include out of control continuous monitoring systems (CMS), such as a CPMS. Any averaging period for...

  11. On the Gabor frame set for compactly supported continuous functions

    DEFF Research Database (Denmark)

    Christensen, Ole; Kim, Hong Oh; Kim, Rae Young

    2016-01-01

    for a function to belong to the class are derived, and it is shown that the B-splines BN, N≥2, and certain ‘continuous and truncated’ versions of several classical functions (e.g., the Gaussian and the two-sided exponential function) belong to the class. The sufficient conditions for the frame property......We identify a class of continuous compactly supported functions for which the known part of the Gabor frame set can be extended. At least for functions with support on an interval of length two, the curve determining the set touches the known obstructions. Easy verifiable sufficient conditions...

  12. Continuous use of intermittent bladder catheterization - can social support contribute?

    Science.gov (United States)

    Lopes, Marjoyre Anne Lindozo; Lima, Elenice Dias Ribeiro de Paula

    2014-01-01

    Objective to investigate the factors affecting the adequate continuous use of intermittent catheterization and its relation with social support. Method sectional, descriptive and correlational study involving 49 patients with neuropathic bladder caused by spinal cord injury. Results almost all (92%) participants continued the intermittent catheterization, but 46.9% made some changes in the technique. The complications (28.6% of the sample) were mainly infection and vesicolithiasis. There were high scores for social support in relation to people that were part of the patient's social support. Conclusion All of them noticed great support from the family, but not from the society in general. The difficulties were related to the lack of equipment and inadequate infrastructure, leading to changes that increased urologic complications. PMID:25029058

  13. Continuous use of intermittent bladder catheterization - can social support contribute?

    Directory of Open Access Journals (Sweden)

    Marjoyre Anne Lindozo Lopes

    2014-06-01

    Full Text Available OBJECTIVE: to investigate the factors affecting the adequate continuous use of intermittent catheterization and its relation with social support.METHOD: sectional, descriptive and correlational study involving 49 patients with neuropathic bladder caused by spinal cord injury.RESULTS: almost all (92% participants continued the intermittent catheterization, but 46.9% made some changes in the technique. The complications (28.6% of the sample were mainly infection and vesicolithiasis. There were high scores for social support in relation to people that were part of the patient's social support.CONCLUSION: All of them noticed great support from the family, but not from the society in general. The difficulties were related to the lack of equipment and inadequate infrastructure, leading to changes that increased urologic complications.

  14. Founders' Continuing Roles in Schools Supporting Self-Directed Learning

    Science.gov (United States)

    Nash, Carol

    2014-01-01

    What should be the continuing role of founders in schools supporting self-directed learning? To answer this, the founders' views of two North American schools for self-directed learners will be compared. One school is exam-focused and private; the other is, test-free and public. The founders of both schools have comparable beliefs regarding the…

  15. Using Short Message Service (SMS) to Support Business Continuity

    CERN Document Server

    Abdel-qader, Maher; AL-Hamami, Alaa

    2011-01-01

    Now a day's many organizations are required to communicate online on a daily basis, 24-hour, seven-days-a-week, to gain the desired competitive advantages and profits; although there are a variety of disruptions that may occur within business application such as broken (off-line) database-links and unhanded database exceptions. Such cases will end the automated business work, and force business users to continue business procedures and functionalities via paper work, which causes additional resources with less business competitive advantages. In this paper, we will propose a new model in which we embed short message services (SMS) within business applications using the SMS Gateway such as "Ozeki Message Server", and programmed application packages. By using our proposed model, we can maintain business continuity when a partial disruption occurs and then switch to our application model. As a result to the experimental work, we conclude that our model supports business continuity since it supports the account b...

  16. Experimental demonstration of continuous variable cloning with phase-conjugate inputs

    DEFF Research Database (Denmark)

    Sabuncu, Metin; Andersen, Ulrik Lund; Leuchs, G.

    2007-01-01

    We report the first experimental demonstration of continuous variable cloning of phase-conjugate coherent states as proposed by Cerf and Iblisdir [Phys. Rev. Lett. 87, 247903 (2001)]. In contrast to this proposal, the cloning transformation is accomplished using only linear optical components......, homodyne detection, and feedforward. As a result of combining phase conjugation with a joint measurement strategy, superior cloning is demonstrated with cloning fidelities reaching 89%....

  17. Plutonium Speciation in Support of Oxidative-Leaching Demonstration Test

    Energy Technology Data Exchange (ETDEWEB)

    Sinkov, Sergey I.

    2007-10-31

    Bechtel National, Inc. (BNI) is evaluating the plutonium speciation in caustic solutions that reasonably represent the process streams from the oxidative-leaching demonstration test. Battelle—Pacific Northwest Division (PNWD) was contracted to develop a spectrophotometric method to measure plutonium speciation at submicromolar (< 10-6 M) concentrations in alkaline solutions in the presence of chromate and carbonate. Data obtained from the testing will be used to identify the oxidation state of Pu(IV), Pu(V), and Pu(VI) species, which potentially could exist in caustic leachates. Work was initially conducted under contract number 24590-101-TSA-W000-00004 satisfying the needs defined in Appendix C of the Research and Technology Plan TSS A-219 to evaluate the speciation of chromium, plutonium, and manganese before and after oxidative leaching. In February 2007, the contract mechanism was switched to Pacific Northwest National Laboratory (PNNL) Operating Contract MOA: 24590-QL-HC9-WA49-00001.

  18. Technical support to the Solvent Refined Coal (SRC) demonstration projects: assessment of current research and development

    Energy Technology Data Exchange (ETDEWEB)

    Edwards, M.S.; Rodgers, B.R.; Brown, C.H.; Carlson, P.K.; Gambill, W.R.; Gilliam, T.M.; Holmes, J.M.; Krishnan, R.P.; Parsly, L.F.

    1980-12-01

    A program to demonstrate Solvent Refined Coal (SRC) technology has been initiated by the US Department of Energy (DOE) in partnership with two industrial groups. Project management responsibility has been assigned to the Oak Ridge Operations Office (ORO) of DOE. ORO requested that the Oak Ridge National Laboratory assess current research and development (R and D) activities and develop recommendations for those activities that might contribute to successful completion of the SRC demonstration plant projects. The objectives of this final report are to discuss in detail the problem areas in SRC; to discuss the current and planned R and D investigations relevant to the problems identified; and to suggest appropriate R and D activities in support of designs for the SRC demonstration plants. Four types of R and D activities are suggested: continuation of present and planned activities; coordination of activities and results, present and proposed; extension/redirection of activities not involving major equipment purchase or modifications; and new activities. Important examples of the first type of activity include continuation of fired heater, slurry rheology, and slurry mixing studies at Ft. Lewis. Among the second type of activity, coordination of data acquisition and interpretation is recommended in the areas of heat transfer, vapor/liquid equilibria, and physical properties. Principal examples of recommendations for extension/redirection include screening studies at laboratory scale on the use of carbonaceous precoat (e.g., anthracite) infiltration, and 15- to 30-day continuous tests of the Texaco gasifier at the Texaco Montebello facility (using SRC residues).

  19. Demonstration of Cluster State Shaping and Quantum Erasure for Continuous Variables

    CERN Document Server

    Miwa, Yoshichika; Yoshikawa, Jun-ichi; Filip, Radim; van Loock, Peter; Furusawa, Akira

    2010-01-01

    We demonstrate experimentally how to remove an arbitrary node from a continuous-variable cluster state and how to shorten any quantum wires of such a state. These two basic operations, performed in an unconditional fashion, are a manifestation of quantum erasure and can be employed to obtain various graph states from an initial cluster state. Starting with a sufficiently large cluster, the resulting graph states can then be used for universal quantum information processing. In the experiment, all variations of this cluster-shaping are demonstrated on a four-mode linear cluster state through homodyne measurements and feedforward.

  20. How to Sustain Change and Support Continuous Quality Improvement.

    Science.gov (United States)

    Silver, Samuel A; McQuillan, Rory; Harel, Ziv; Weizman, Adam V; Thomas, Alison; Nesrallah, Gihad; Bell, Chaim M; Chan, Christopher T; Chertow, Glenn M

    2016-05-06

    To achieve sustainable change, quality improvement initiatives must become the new way of working rather than something added on to routine clinical care. However, most organizational change is not maintained. In this next article in this Moving Points in Nephrology feature on quality improvement, we provide health care professionals with strategies to sustain and support quality improvement. Threats to sustainability may be identified both at the beginning of a project and when it is ready for implementation. The National Health Service Sustainability Model is reviewed as one example to help identify issues that affect long-term success of quality improvement projects. Tools to help sustain improvement include process control boards, performance boards, standard work, and improvement huddles. Process control and performance boards are methods to communicate improvement results to staff and leadership. Standard work is a written or visual outline of current best practices for a task and provides a framework to ensure that changes that have improved patient care are consistently and reliably applied to every patient encounter. Improvement huddles are short, regular meetings among staff to anticipate problems, review performance, and support a culture of improvement. Many of these tools rely on principles of visual management, which are systems transparent and simple so that every staff member can rapidly distinguish normal from abnormal working conditions. Even when quality improvement methods are properly applied, the success of a project still depends on contextual factors. Context refers to aspects of the local setting in which the project operates. Context affects resources, leadership support, data infrastructure, team motivation, and team performance. For these reasons, the same project may thrive in a supportive context and fail in a different context. To demonstrate the practical applications of these quality improvement principles, these principles are

  1. Andrei Sakharov Prize Talk: Supporting Repressed Scientists: Continuing Efforts

    Science.gov (United States)

    Birman, Joseph L.

    2010-02-01

    Some years ago, Max Perutz asked ``By What Right Do We Scientists Invoke Human Rights?" My presentation will start with mentioning actions of the international community which relate to this question. Such action as the creation in 1919 of the International Research Council, and continuing on to the present with the UN sanctioned International Council of Scientific Unions [ICSU], and other Committees such as those formed by APS, CCS, NYAS, AAAS which give support to repressed scientists around the world now. My own work has attempted to combine my individual initiatives with work as a member and officer of these groups. Together with like minded colleagues who are deeply affected when colleagues are discharged from their positions, exiled, imprisoned and subject to brutal treatment, often after mock ``trials", we react. On visits in 1968 to conferences in Budapest, and then in 1969 to Moscow, Tallin and Leningrad I became personally and deeply touched by the lives of colleagues who were seriously constrained by living under dictatorships. I could move freely into and out of their countries,speak openly about my work or any other matter. They could not, under penalty of possibly serious punishment. Yet, I felt these people were like my extended family. If my grandparents had not left Eastern Europe for the USA in the late 189Os our situations could have been reversed. A little later in the 197O's, ``refusenik" and ``dissident" scientists in the USSR needed support. Colleagues like Andrei Sakharov, Naum Meiman, Mark Azbel, Yakov Alpert, Yuri Orlov and others were being punished for exercising their rights under the UN sanctioned international protocals on ``Universality of Science and Free Circulation of Scientists". Their own governments [which signed these agreements] ignored the very protections they had supported. On frequent trips to the USSR during the 7Os,and 8Os I also seized the opportunity for ``individual initiative" to help these colleagues. I asked for

  2. Demonstration of a Controlled-Phase Gate for Continuous-Variable One-Way Quantum Computation

    CERN Document Server

    Ukai, Ryuji; Yoshikawa, Jun-ichi; van Loock, Peter; Furusawa, Akira

    2011-01-01

    We experimentally demonstrate a controlled-phase gate for continuous variables in a fully measurement-based fashion. In our scheme, the two independent input states of the gate, encoded in two optical modes, are teleported into a four-mode Gaussian cluster state. As a result, one of the entanglement links present in the initial cluster state appears in the two unmeasured output modes as the corresponding entangling gate acting on the input states. The genuine quantum character of this gate becomes manifest and is verified through the presence of entanglement at the output for a product two-mode coherent input state. By combining our controlled-phase gate with the recently reported module for universal single-mode Gaussian operations [R. Ukai et al., Phys. Rev. Lett. 106, 240504 (2011)], it is possible to implement universal Gaussian operations on arbitrary multi-mode quantum optical states in form of a fully measurement-based one-way quantum computation.

  3. Analysis of occludin trafficking, demonstrating continuous endocytosis, degradation, recycling and biosynthetic secretory trafficking.

    Directory of Open Access Journals (Sweden)

    Sarah J Fletcher

    Full Text Available Tight junctions (TJs link adjacent cells and are critical for maintenance of apical-basolateral polarity in epithelial monolayers. The TJ protein occludin functions in disparate processes, including wound healing and Hepatitis C Virus infection. Little is known about steady-state occludin trafficking into and out of the plasma membrane. Therefore, we determined the mechanisms responsible for occludin turnover in confluent Madin-Darby canine kidney (MDCK epithelial monolayers. Using various biotin-based trafficking assays we observed continuous and rapid endocytosis of plasma membrane localised occludin (the majority internalised within 30 minutes. By 120 minutes a significant reduction in internalised occludin was observed. Inhibition of lysosomal function attenuated the reduction in occludin signal post-endocytosis and promoted co-localisation with the late endocytic system. Using a similar method we demonstrated that ∼20% of internalised occludin was transported back to the cell surface. Consistent with these findings, significant co-localisation between internalised occludin and recycling endosomal compartments was observed. We then quantified the extent to which occludin synthesis and transport to the plasma membrane contributes to plasma membrane occludin homeostasis, identifying inhibition of protein synthesis led to decreased plasma membrane localised occludin. Significant co-localisation between occludin and the biosynthetic secretory pathway was demonstrated. Thus, under steady-state conditions occludin undergoes turnover via a continuous cycle of endocytosis, recycling and degradation, with degradation compensated for by biosynthetic exocytic trafficking. We developed a mathematical model to describe the endocytosis, recycling and degradation of occludin, utilising experimental data to provide quantitative estimates for the rates of these processes.

  4. Demonstration of the waste tire pyrolysis process on pilot scale in a continuous auger reactor

    Energy Technology Data Exchange (ETDEWEB)

    Martínez, Juan Daniel, E-mail: juand.martinez@upb.edu.co [Instituto de Carboquímica, ICB-CSIC, Miguel Luesma Castán 4, 50018, Zaragoza (Spain); Grupo de Investigaciones Ambientales, Instituto de Energía, Materiales y Medio Ambiente, Universidad Pontificia Bolivariana, Circular 1 N°70-01, Bloque 11, piso 2, Medellín (Colombia); Murillo, Ramón; García, Tomás; Veses, Alberto [Instituto de Carboquímica, ICB-CSIC, Miguel Luesma Castán 4, 50018, Zaragoza (Spain)

    2013-10-15

    Highlights: • The continuous pyrolysis of waste tire has been demonstrated at pilot scale in an auger reactor. • More than 500 kg of waste tires were processed in 100 operational hours. • The yields and characteristics of the pyrolysis products remained constant. • Mass and energy balances for an industrial scale plant are provided. • The reaction enthalpy necessary to perform the waste tire pyrolysis was determined. -- Abstract: This work shows the technical feasibility for valorizing waste tires by pyrolysis using a pilot scale facility with a nominal capacity of 150 kW{sub th}. A continuous auger reactor was operated to perform thirteen independent experiments that conducted to the processing of more than 500 kg of shredded waste tires in 100 h of operation. The reaction temperature was 550 °C and the pressure was 1 bar in all the runs. Under these conditions, yields to solid, liquid and gas were 40.5 ± 0.3, 42.6 ± 0.1 and 16.9 ± 0.3 wt.% respectively. Ultimate and proximate analyses as well as heating value analysis were conducted for both the solid and liquid fraction. pH, water content, total acid number (TAN), viscosity and density were also assessed for the liquid and compared to the specifications of marine fuels (standard ISO 8217). Gas chromatography was used to calculate the composition of the gaseous fraction. It was observed that all these properties remained practically invariable along the experiments without any significant technical problem. In addition, the reaction enthalpy necessary to perform the waste tire pyrolysis process (907.1 ± 40.0 kJ/kg) was determined from the combustion and formation enthalpies of waste tire and conversion products. Finally, a mass balance closure was performed showing an excellent reliability of the data obtained from the experimental campaign.

  5. Cigarette continuity programs and social support for smoking.

    Science.gov (United States)

    Sumner, W; Dunaway, M; Dillman, D G

    1998-01-01

    To describe smokers' participation in cigarette continuity programs and the prevalence and structure of cooperative teams of smokers. Cross-sectional survey of smoking histories and continuity-program participation by individuals and their family members in a convenience sample of 176 current smokers at the University of Kentucky Chandler Medical Center, Lexington. Fisher exact test or chi2 tests were used to compare proportions. One of 3 smokers collected coupons for a continuity program. Three quarters of the collectors redeemed their own coupons, and one quarter gave coupons to another collector. Coupon collectors reported an average team size of more than 2 members. One fifth of collectors were teammates with another generation of family members, and one quarter of collectors aged 24 to 35 years were teammates with their children. Smokers were often aware of their relatives' coupon-collecting habits. Continuity programs have been a popular means of reinforcing smoking, especially within families and groups of friends. Continuity programs are novel in encouraging smoking and brand loyalty between generations. Continuity-program participants need to be aware of the risk of promoting smoking initiation by their children. Health advocates could use similar strategies to promote smoking cessation and prevention within families and other social groups.

  6. MELiSSA Pilot Plant: A facility for ground demonstration of a closed life support system

    Science.gov (United States)

    Godia, Francesc; Fossen, Arnaud; Peiro, Enrique; Gerbi, Olivier; Dussap, Gilles; Leys, Natalie; Arnau, Carolina; Milian, Ernest

    MELiSSA (Micro Ecological Life Support System Alternative) is an international collaborative effort focused on the development of a Life Support System for long-term Space missions. The goals of the MELiSSA loop are the recovery of food, water and oxygen from wastes, i.e. CO2 and organic wastes, using light as a source of energy. It is conceived as a series of compartments, each one performing a specific function within this cycle, inspired in the terrestrial ecological systems. Each one of the compartments is colonized with specific bacteria or higher plants depending on its dedicated function. Therefore, its design and operational conditions should guarantee that only a given specific biological activity takes place in each compartment. Moreover, this has to be done in a controlled manner, both at the subsystems level (i.e., compartments) and at the overall system level (i.e., complete loop). In order to achieve the complete operation of such a Closed Ecological System, in a first step each compartment has to be developed at individual level, and its operation demonstrated under its associated control law. In a second step, the complete loop needs to be integrated by the connection of the different compartments in the gas, loop and solid phases. An extensive demonstration of MELiSSA loop under terrestrial conditions is a mandatory step in the process of its adaptation to space. This is the main goal of the MPP. The demonstration scenario for the MPP is the respiration equivalent of a human being, and production of 20 percent of the diet of one person. To serve this goal, the different compartments of the MELiSSA loop have been designed and sized at the pilot scale level, and further characterized. Nowadays, the focus of the MELiSSA Pilot Plant is on the integration of its compartments. To this end, the integration challenge is concentrated in three compartments devoted to the following functions: nitrification (Compartment 3, an axenic co-culture of Nitrosomonas

  7. Cognitive Support for Learning Computer-Based Tasks Using Animated Demonstration

    Science.gov (United States)

    Chen, Chun-Ying

    2016-01-01

    This study investigated the influence of cognitive support for learning computer-based tasks using animated demonstration (AD) on instructional efficiency. Cognitive support included (1) segmentation and learner control introducing interactive devices that allow content sequencing through a navigational menu, and content pacing through stop and…

  8. A model supporting Business Continuity auditing & planning in Information Systems

    NARCIS (Netherlands)

    Zambon, Emmanuele; Bolzoni, D.; Etalle, Sandro; Salvato, Marco

    2007-01-01

    One of the main tasks of IT business continuity planing (BCP) is guaranteeing that incidents affecting the IT infrastructure do not affect the availability of IT-dependent business processes beyond a given acceptable extent. Carrying out BCP of information systems is particularly challenging because

  9. A model supporting Business Continuity auditing & planning in Information Systems

    NARCIS (Netherlands)

    Zambon, Emmanuele; Bolzoni, D.; Etalle, Sandro; Salvato, Marco

    2007-01-01

    One of the main tasks of IT business continuity planning (BCP) is to guarantee that incidents affecting the IT infrastructure do not affect the availability of IT-dependent business processes beyond a given acceptable extent. Carrying out BCP of information systems is particularly challenging,

  10. A model supporting Business Continuity auditing & planning in Information Systems

    NARCIS (Netherlands)

    Zambon, Emmanuele; Bolzoni, Damiano; Etalle, Sandro; Salvato, Marco

    2007-01-01

    One of the main tasks of IT business continuity planning (BCP) is to guarantee that incidents affecting the IT infrastructure do not affect the availability of IT-dependent business processes beyond a given acceptable extent. Carrying out BCP of information systems is particularly challenging, becau

  11. A model supporting Business Continuity auditing & planning in Information Systems

    NARCIS (Netherlands)

    Zambon, Emmanuele; Bolzoni, Damiano; Etalle, Sandro; Salvato, Marco

    2007-01-01

    One of the main tasks of IT business continuity planing (BCP) is guaranteeing that incidents affecting the IT infrastructure do not affect the availability of IT-dependent business processes beyond a given acceptable extent. Carrying out BCP of information systems is particularly challenging because

  12. Experimentally supported mathematical modeling of continuous baking processes

    DEFF Research Database (Denmark)

    Stenby Andresen, Mette

    The scope of the PhD project was to increase knowledge on the process-to-product interactions in continuous tunnel ovens. The work has focused on five main objectives. These objectives cover development of new experimental equipment for pilot plant baking experiments, mathematical modeling of heat...... in this thesis. The oven was successfully validated against a 10 m tunnel oven. Besides the ability to emulate the baking conditions in a tunnel oven, the new batch oven is designed and constructed for experimental research work. In the design options to follow the product continuously (especially weight...... and temperature) and control the process (air flow, temperature, and humidity) are therefore emphasized. The oven is furthermore designed to work outside the range of standard tunnel ovens, making it interesting for manufacturers of both baking products and baking equipment. A mathematical model describing...

  13. Autotrophic Nitrogen Removal in a Membrane-Aerated Biofilm Reactor Under Continuous Aeration: A Demonstration

    DEFF Research Database (Denmark)

    Gilmore, Kevin R.; Terada, Akihiko; Smets, Barth F.

    2013-01-01

    This work describes the successful coupling of partial nitrification (nitritation) and anaerobic ammonium oxidation in a membrane-aerated biofilm reactor (MABR) with continuous aeration. Controlling the relative surface loadings of oxygen versus ammonium prevented complete nitrite oxidation and a...

  14. 40 CFR 63.5890 - How do I calculate an organic HAP emissions factor to demonstrate compliance for continuous...

    Science.gov (United States)

    2010-07-01

    ... emissions factor to demonstrate compliance for continuous lamination/casting operations? 63.5890 Section 63...) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES National Emissions Standards for Hazardous Air Pollutants: Reinforced Plastic Composites Production Testing and Initial...

  15. Dynamic Radioactive Source for Evaluating and Demonstrating Time-dependent Performance of Continuous Air Monitors.

    Science.gov (United States)

    McLean, Thomas D; Moore, Murray E; Justus, Alan L; Hudston, Jonathan A; Barbé, Benoît

    2016-11-01

    Evaluation of continuous air monitors in the presence of a plutonium aerosol is time intensive, expensive, and requires a specialized facility. The Radiation Protection Services Group at Los Alamos National Laboratory has designed a Dynamic Radioactive Source, intended to replace plutonium aerosol challenge testing. The Dynamic Radioactive Source is small enough to be inserted into the sampler filter chamber of a typical continuous air monitor. Time-dependent radioactivity is introduced from electroplated sources for real-time testing of a continuous air monitor where a mechanical wristwatch motor rotates a mask above an alpha-emitting electroplated disk source. The mask is attached to the watch's minute hand, and as it rotates, more of the underlying source is revealed. The measured alpha activity increases with time, simulating the arrival of airborne radioactive particulates at the air sampler inlet. The Dynamic Radioactive Source allows the temporal behavior of puff and chronic release conditions to be mimicked without the need for radioactive aerosols. The new system is configurable to different continuous air monitor designs and provides an in-house testing capability (benchtop compatible). It is a repeatable and reusable system and does not contaminate the tested air monitor. Test benefits include direct user control, realistic (plutonium) aerosol spectra, and iterative development of continuous air monitor alarm algorithms. Data obtained using the Dynamic Radioactive Source has been used to elucidate alarm algorithms and to compare the response time of two commercial continuous air monitors.

  16. Continuous recycling of enzymes during production of lignocellulosic bioethanol in demonstration scale

    DEFF Research Database (Denmark)

    Haven, Mai Østergaard; Lindedam, Jane; Jeppesen, Martin D.;

    2015-01-01

    Recycling of enzymes in production of lignocellulosic bioethanol has been tried for more than 30 years. So far, the successes have been few and the experiments have been carried out at conditions far from those in an industrially feasible process. Here we have tested continuous enzyme recycling a...

  17. 40 CFR 63.8615 - How do I monitor and collect data to demonstrate continuous compliance?

    Science.gov (United States)

    2010-07-01

    ... periods of monitor malfunctions, associated repairs, and required quality assurance or control activities... monitoring malfunctions, associated repairs, out-of-control periods, or required quality assurance or control... SOURCE CATEGORIES (CONTINUED) National Emission Standards for Hazardous Air Pollutants for Clay Ceramics...

  18. Continuous Theta-Burst Stimulation Demonstrates a Causal Role of Premotor Homunculus in Action Understanding

    DEFF Research Database (Denmark)

    Michael, John; Sandberg, Kristian; Skewes, Joshua

    2014-01-01

    Although it is well established that regions of premotor cortex (PMC) are active during action observation, it remains controversial whether they play a causal role in action understanding. In the experiment reported here, we used offline continuous theta-burst stimulation (cTBS) to investigate...

  19. Continuous Theta-Burst Stimulation Demonstrates a Causal Role of Premotor Homunculus in Action Understanding

    DEFF Research Database (Denmark)

    Michael, John; Sandberg, Kristian; Skewes, Joshua

    2014-01-01

    Although it is well established that regions of premotor cortex (PMC) are active during action observation, it remains controversial whether they play a causal role in action understanding. In the experiment reported here, we used offline continuous theta-burst stimulation (cTBS) to investigate t...

  20. 40 CFR Table 4 of Subpart Bbbbbbb... - Continuous Compliance Demonstration Methods With the Emission Reduction and PM Concentration...

    Science.gov (United States)

    2010-07-01

    ... Methods With the Emission Reduction and PM Concentration Requirements 4 Table 4 of Subpart BBBBBBB of Part... Concentration Requirements If you are demonstrating compliance with the * * * You must demonstrate continuous...) or an outlet concentration of 0.03 gr/dscf or less Using one of the following monitoring methods:a. A...

  1. Coal demonstration plants. Quarterly report, January-March 1979. [US DOE-supported

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-01-01

    Progress in US DOE-supported demonstration plants for the gasification and liquefaction of coal is reported: company, contract number, process description and flowsheet, history and progress in the current quarter. Related projects involve coal feeders, lock hoppers, values, etc. for feeding coal into high pressure systems, coal grinding equipment and measuring and process control instrumentation. (LTN)

  2. Continuous-flow stirred-tank reactor 20-L demonstration test: Final report

    Energy Technology Data Exchange (ETDEWEB)

    Lee, D.D.; Collins, J.L.

    2000-02-01

    One of the proposed methods of removing the cesium, strontium, and transuranics from the radioactive waste storage tanks at Savannah River is the small-tank tetraphenylborate (TPB) precipitation process. A two-reactor-in-series (15-L working volume each) continuous-flow stirred-tank reactor (CSTR) system was designed, constructed, and installed in a hot cell to test the Savannah River process. The system also includes two cross-flow filtration systems to concentrate and wash the slurry produced in the process, which contains the bulk of radioactivity from the supernatant processed through the system. Installation, operational readiness reviews, and system preparation and testing were completed. The first test using the filtration systems, two CSTRs, and the slurry concentration system was conducted over a 61-h period with design removal of Cs, Sr, and U achieved. With the successful completion of Test 1a, the following tests, 1b and 1c, were not required.

  3. Feasibility and design study of continuously variable capacity refrigeration plant. A demonstration at Safeway plc

    Energy Technology Data Exchange (ETDEWEB)

    1991-01-01

    This report concerns a feasibility and design study carried out on a new type of high efficiency refrigeration system for use in supermarkets. The study compared the performance of Margaux Continuously Variable Capacity (CVC) refrigeration equipment with conventional supermarket plant. The tests were carried out at a Presto store in Stanley near Newcastle-upon-Tyne from August 1988 to February 1989. They involved assessment of systems for both chilled food (HT) and frozen food (LT). Significant energy savings were achieved by the CVC equipment. The HT system reduced energy consumption by 56% compared with conventional plant. Measured LT savings were only 13%, although adjustments made for monitoring problems and improved temperature control indicate savings of around 30%. (author)

  4. Continuing Professional Education, Organizational Support, and Professional Competence: Dilemmas of Rural Nurses.

    Science.gov (United States)

    Beatty, Rebecca M.

    2001-01-01

    Responses from 199 rural Pennsylvania nurses showed that 86% had participated in recent continuing education. Deterrents included lack of support from supervisors/spouses, inflexible schedules, money, time, and travel. Administrators believed nurses were supported for professional development. Little money was available for continuing education.…

  5. Demonstration of the waste tire pyrolysis process on pilot scale in a continuous auger reactor.

    Science.gov (United States)

    Martínez, Juan Daniel; Murillo, Ramón; García, Tomás; Veses, Alberto

    2013-10-15

    This work shows the technical feasibility for valorizing waste tires by pyrolysis using a pilot scale facility with a nominal capacity of 150 kWth. A continuous auger reactor was operated to perform thirteen independent experiments that conducted to the processing of more than 500 kg of shredded waste tires in 100 h of operation. The reaction temperature was 550°C and the pressure was 1 bar in all the runs. Under these conditions, yields to solid, liquid and gas were 40.5 ± 0.3, 42.6 ± 0.1 and 16.9 ± 0.3 wt.% respectively. Ultimate and proximate analyses as well as heating value analysis were conducted for both the solid and liquid fraction. pH, water content, total acid number (TAN), viscosity and density were also assessed for the liquid and compared to the specifications of marine fuels (standard ISO 8217). Gas chromatography was used to calculate the composition of the gaseous fraction. It was observed that all these properties remained practically invariable along the experiments without any significant technical problem. In addition, the reaction enthalpy necessary to perform the waste tire pyrolysis process (907.1 ± 40.0 kJ/kg) was determined from the combustion and formation enthalpies of waste tire and conversion products. Finally, a mass balance closure was performed showing an excellent reliability of the data obtained from the experimental campaign.

  6. Demonstration of a GaAs-based 1550-nm continuous wave photomixer

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, W.-D., E-mail: weidong.zhang@wright.edu; Brown, E. R. [Terahertz Sensor Laboratory, Departments of Physics and Electrical Engineering, Wright State University, Dayton, Ohio 45435 (United States); Middendorf, J. R. [Mound Laser and Photonics Center, Inc., Kettering, Ohio 45420 (United States)

    2015-01-12

    An Er:GaAs-based 1550-nm CW photomixer is demonstrated. The related mechanism is extrinsic photoconductivity with optical absorption between the localized deep levels created by the Er and the extended states above the conduction band edge of GaAs. With the power boost made possible by a fiber-coupled erbium-doped-fiber amplifier, the Er:GaAs photomixers, operating at 1550 nm, radiate THz power levels easily measured by a Golay cell, and display a power spectrum having a −3 dB roll-off frequency of 307 GHz. This corresponds to a photocarrier lifetime of 520 fs, in good agreement with a previous measurement of the bandwidth of the same material in a photoconductive switch.

  7. Electric Ground Support Equipment Advanced Battery Technology Demonstration Project at the Ontario Airport

    Energy Technology Data Exchange (ETDEWEB)

    Tyler Gray; Jeremy Diez; Jeffrey Wishart; James Francfort

    2013-07-01

    The intent of the electric Ground Support Equipment (eGSE) demonstration is to evaluate the day-to-day vehicle performance of electric baggage tractors using two advanced battery technologies to demonstrate possible replacements for the flooded lead-acid (FLA) batteries utilized throughout the industry. These advanced battery technologies have the potential to resolve barriers to the widespread adoption of eGSE deployment. Validation testing had not previously been performed within fleet operations to determine if the performance of current advanced batteries is sufficient to withstand the duty cycle of electric baggage tractors. This report summarizes the work performed and data accumulated during this demonstration in an effort to validate the capabilities of advanced battery technologies. This report summarizes the work performed and data accumulated during this demonstration in an effort to validate the capabilities of advanced battery technologies. The demonstration project also grew the relationship with Southwest Airlines (SWA), our demonstration partner at Ontario International Airport (ONT), located in Ontario, California. The results of this study have encouraged a proposal for a future demonstration project with SWA.

  8. Theoretical pattern of supporting continuity in physical education of students' personality.

    Directory of Open Access Journals (Sweden)

    Vovk V.M.

    2011-04-01

    Full Text Available Methodological approaches and principles on which theoretical pattern of supporting of continuity in physical education of senior pupil and students' personality are considered. It is proved that effective process of continuity in physical education is impossible without construction of patterns. It is ascertained that continuity is a condition and mechanism of realization for others principles in teaching process that represent itself as major factors in realization of continuity in physical education.

  9. Effects of continuous midwifery labour support for women with severe fear of childbirth

    OpenAIRE

    Sydsjö, Gunilla; Blomberg, Marie; Palmquist, Sofie; Angerbjörn, Louise; Bladh, Marie; Josefsson, Ann

    2015-01-01

    Background: Continuous support by a midwife during childbirth has shown positive effects on the duration of active labour, use of pain relief and frequency of caesarean section (CS) in women without fear of childbirth (FOC). We have evaluated how continuous support by a specially assigned midwife during childbirth affects birth outcome and the subjective experience of women with severe FOC. Methods: A case-control pilot study with an index group of 14 women with severe FOC and a reference gro...

  10. Healthy birth practice #3: bring a loved one, friend, or doula for continuous support.

    Science.gov (United States)

    Green, Jeanne; Hotelling, Barbara A

    2014-01-01

    All women should be allowed and encouraged to bring a loved one, friend, or doula to their birth without financial or cultural barriers. Continuous labor support offers benefits to mothers and their babies with no known harm. This article is an updated evidence-based review of the "Lamaze International Care Practices that Promote Normal Birth, Care Practice #3: Continuous Labor Support," published in The Journal of Perinatal Education, 16(3), 2007.

  11. Healthy Birth Practice #3: Bring a Loved One, Friend, or Doula for Continuous Support

    OpenAIRE

    Green, Jeanne; Hotelling, Barbara A.

    2014-01-01

    All women should be allowed and encouraged to bring a loved one, friend, or doula to their birth without financial or cultural barriers. Continuous labor support offers benefits to mothers and their babies with no known harm. This article is an updated evidence-based review of the “Lamaze International Care Practices that Promote Normal Birth, Care Practice #3: Continuous Labor Support,” published in The Journal of Perinatal Education, 16(3), 2007.

  12. Biological support media influence the bacterial biofouling community in reverse osmosis water reclamation demonstration plants.

    Science.gov (United States)

    Ferrera, Isabel; Mas, Jordi; Taberna, Elisenda; Sanz, Joan; Sánchez, Olga

    2015-01-01

    The diversity of the bacterial community developed in different stages of two reverse osmosis (RO) water reclamation demonstration plants designed in a wastewater treatment plant (WWTP) in Tarragona (Spain) was characterized by applying 454-pyrosequencing of the 16S rRNA gene. The plants were fed by secondary treated effluent to a conventional pretreatment train prior to the two-pass RO system. Plants differed in the material used in the filtration process, which was sand in one demonstration plant and Scandinavian schists in the second plant. The results showed the presence of a highly diverse and complex community in the biofilms, mainly composed of members of the Betaproteobacteria and Bacteroidetes in all stages, with the presence of some typical wastewater bacteria, suggesting a feed water origin. Community similarities analyses revealed that samples clustered according to filter type, highlighting the critical influence of the biological supporting medium in biofilm community structure.

  13. Demonstrating Reliable High Level Waste Slurry Sampling Techniques to Support Hanford Waste Processing

    Energy Technology Data Exchange (ETDEWEB)

    Kelly, Steven E.

    2013-11-11

    The Hanford Tank Operations Contractor (TOC) and the Hanford Waste Treatment and Immobilization Plant (WTP) contractor are both engaged in demonstrating mixing, sampling, and transfer system capability using simulated Hanford High-Level Waste (HL W) formulations. This work represents one of the remaining technical issues with the high-level waste treatment mission at Hanford. The TOC must demonstrate the ability to adequately mix and sample high-level waste feed to meet the WTP Waste Acceptance Criteria and Data Quality Objectives. The sampling method employed must support both TOC and WTP requirements. To facilitate information transfer between the two facilities the mixing and sampling demonstrations are led by the One System Integrated Project Team. The One System team, Waste Feed Delivery Mixing and Sampling Program, has developed a full scale sampling loop to demonstrate sampler capability. This paper discusses the full scale sampling loops ability to meet precision and accuracy requirements, including lessons learned during testing. Results of the testing showed that the Isolok(R) sampler chosen for implementation provides precise, repeatable results. The Isolok(R) sampler accuracy as tested did not meet test success criteria. Review of test data and the test platform following testing by a sampling expert identified several issues regarding the sampler used to provide reference material used to judge the Isolok's accuracy. Recommendations were made to obtain new data to evaluate the sampler's accuracy utilizing a reference sampler that follows good sampling protocol.

  14. Leading Learning: The Role of School Leaders in Supporting Continuous Professional Development

    Science.gov (United States)

    Stevenson, Michael; Hedberg, John G.; O'Sullivan, Kerry-Ann; Howe, Cathie

    2016-01-01

    In contemporary school settings, leaders seeking to support professional development are faced with many challenges. These challenges call for educators who can undertake professional learning that is continuous and adaptive to change. As a term, continuous professional development (CPD) reflects many different forms of professional development in…

  15. Moral Support, Strategic Reasoning, or Domestic Politics: America’s Continual Support to Israel

    Science.gov (United States)

    2007-12-01

    3Stephen Zunes, “The Israel Lobby: How Powerful is it Really?” (FPIF, 2006); Nadav Safran , Israel The Embattled Ally...better relations with Arabs.57 As time went on, according to Nadav Safran , “Nasser and the Soviets used the American sympathy and support for...57 Safran , 578. 58 Safran , 579. 21 Israel and using the Middle East to help offset the Soviet threat created a

  16. Pharmacokinetics of continuous-infusion meropenem in a pediatric patient receiving extracorporeal life support.

    Science.gov (United States)

    Cies, Jeffrey J; Moore, Wayne S; Dickerman, Mindy J; Small, Christine; Carella, Dominick; Chopra, Arun; Parker, Jason

    2014-10-01

    Meropenem, a broad-spectrum carbapenem, is commonly used for empirical and definitive therapy in the pediatric intensive care unit (ICU). Pharmacokinetic data to guide dosing in children, however, are limited to healthy volunteers or patients who are not in the ICU. Adult data demonstrate that pharmacokinetic parameters such as the volume of distribution and clearance can be significantly altered in individuals receiving extracorporeal membrane oxygenation (ECMO). Alterations in the volume of distribution and clearance of antimicrobials in patients with sepsis and septic shock have also been documented, and these patients have demonstrated lower than expected antimicrobial serum concentrations based on standard dosing regimens. Therefore, an understanding of the pharmacokinetic changes in critically ill children receiving ECMO is crucial to determining the most appropriate dose and dosing interval selection for any antimicrobial therapy. In this case report, we describe the pharmacokinetics of a continuous infusion of meropenem in a pediatric cardiac ICU patient who was receiving concurrent extracorporeal life support. The patient was an 8-month-old male infant who underwent a Glenn procedure and pulmonary artery reconstruction. Postoperatively, he required ECMO with a total run of 21 days. On day 11 of ECMO, a bronchoalveolar lavage was performed, and blood cultures from days 11 and 12 of ECMO grew Pseudomonas aeruginosa, with a meropenem minimum inhibitory concentration (MIC) of 0.5 μg/ml. On ECMO day 13, meropenem was initiated with a loading dose of 40 mg/kg and infused over 30 minutes, followed by a continuous infusion of 200 mg/kg/day. A meropenem serum concentration measured 8 hours after the start of the infusion was 46 μg/ml. Repeat levels were measured on days 3 and 9 of meropenem therapy and were 39 and 42 μg/ml, respectively. Repeat blood and respiratory cultures remained negative. This meropenem regimen (40-mg/kg bolus followed by a

  17. JPL Table Mountain Facility Support of the Ground/Orbiter Lasercomm Demonstration

    Science.gov (United States)

    Gillam, S. D.; Young, J. W.; Sidwell, D. R.

    1996-01-01

    On 23 nights between October 30, 1995, and January 13, 1996, the JPL Table Mountain Facility (TMF) was the site of the ground stations of the Ground/Orbiter Lasercomm Demonstration (GOLD). These 0.6-m and 1.2-m telescopes acted as terminals in a bent-pipe optical communications link. This link went from the ground to an optical communications transceiver terminal on the Japanese Engineering Test Satellite (ETS-VI) and back to the ground. This article describes how the TMF supported this novel optical communications experiment. This experiment was a collaborative effort between JPL, NASA's Deep Space Network (DSN), the Japanese National Aeronautics and Space Development Agency (NASDA), and the Japanese Communications Research Laboratory (CRL), which operates the ETS-VI. The 0.6-m telescope, in the coude configuration, was used to uplink a 514-nm modulated laser to the transceiver on the ETS-VI communications satellite. The 1.2-m telescope, in the Cassegrain configuration, was used to detect an 830-nm diode laser signal downlinked from the ETS-VI terminal. The downlink was sent only if the uplink beam was detected. The uplink beam had to be kept within a box 5 arcsec on a side and centered on the position of the ETS-VI. This required that the 0.6-m telescope track the ETS-VI to a precision of ~2 arcsec. The 1.2-m telescope was required to track to a precision of 4{5 arcsec because the downlink detector had an aperture with a 13-arcsec-diameter field of view. This article describes how the above tracking performance was met by both telescopes. Equipment designed for the experiment at the transmitter and receiver stations, acquisition methods, and software developed to support this project are discussed, as are experiments performed to establish the suitability of the TMF telescopes for this demonstration. This article discusses upgrades to the TMF electrical power system needed to support GOLD; mechanical, optical, and servo-control aspects of the transmitter and

  18. A Foundation for Vital Academic and Social Support in Clerkships: Learning Through Peer Continuity.

    Science.gov (United States)

    Chou, Calvin L; Teherani, Arianne

    2017-07-01

    Most medical students on clerkships currently experience lack of continuity of patient care, disjointed learning, and frequent changes in supervisors. Clerkship programs with continuity of care, curriculum, and supervisors appear to benefit student learning and patient-centeredness. A fourth form of continuity is proposed: continuity of peers, in which a stable cohort of students frequently meets to process their experiences on clerkships. This structure builds on benefits previously seen in peer-assisted learning, including enhanced knowledge, technical skills, and collegial peer relationships. Additional advantages of peer continuity in clerkships include facilitated integration into the workplace, social support, and enhanced clinical and professional learning. Practical components required for a successful peer continuity structure include intentional formation of peer cohorts; regular meetings that cover didactic or clinical skills learning; frequent opportunities for reflection on patient care, professional development, and well-being; and skilled facilitators without evaluative roles. Theoretical support for peer continuity comes from social cognitive theory, communities of clinical practice, and social comparison theory. Therefore, in conjunction with empirical programs that have shown benefits of developing these structures, peer continuity should become a formalized educational structure in clerkships.

  19. First application of supported ionic liquid phase (SILP) catalysis for continuous methanol carbonylation

    DEFF Research Database (Denmark)

    Riisager, Anders; Jørgensen, Betina; Wasserscheid, Peter

    2006-01-01

    A solid, silica-supported ionic liquid phase (SILP) rhodium iodide Monsanto-type catalyst system, [BMIM][Rh(CO)(2)I-2]-[BMIM]I -SiO2, exhibits excellent activity and selectivity towards acetyl products in fixed-bed, continuous gas-phase methanol carbonylation.......A solid, silica-supported ionic liquid phase (SILP) rhodium iodide Monsanto-type catalyst system, [BMIM][Rh(CO)(2)I-2]-[BMIM]I -SiO2, exhibits excellent activity and selectivity towards acetyl products in fixed-bed, continuous gas-phase methanol carbonylation....

  20. Development of analytical cell support for vitrification at the West Valley Demonstration Project. Topical report

    Energy Technology Data Exchange (ETDEWEB)

    Barber, F.H.; Borek, T.T.; Christopher, J.Z. [and others

    1997-12-01

    Analytical and Process Chemistry (A&PC) support is essential to the high-level waste vitrification campaign at the West Valley Demonstration Project (WVDP). A&PC characterizes the waste, providing information necessary to formulate the recipe for the target radioactive glass product. High-level waste (HLW) samples are prepared and analyzed in the analytical cells (ACs) and Sample Storage Cell (SSC) on the third floor of the main plant. The high levels of radioactivity in the samples require handling them in the shielded cells with remote manipulators. The analytical hot cells and third floor laboratories were refurbished to ensure optimal uninterrupted operation during the vitrification campaign. New and modified instrumentation, tools, sample preparation and analysis techniques, and equipment and training were required for A&PC to support vitrification. Analytical Cell Mockup Units (ACMUs) were designed to facilitate method development, scientist and technician training, and planning for analytical process flow. The ACMUs were fabricated and installed to simulate the analytical cell environment and dimensions. New techniques, equipment, and tools could be evaluated m in the ACMUs without the consequences of generating or handling radioactive waste. Tools were fabricated, handling and disposal of wastes was addressed, and spatial arrangements for equipment were refined. As a result of the work at the ACMUs the remote preparation and analysis methods and the equipment and tools were ready for installation into the ACs and SSC m in July 1995. Before use m in the hot cells, all remote methods had been validated and four to eight technicians were trained on each. Fine tuning of the procedures has been ongoing at the ACs based on input from A&PC technicians. Working at the ACs presents greater challenges than had development at the ACMUs. The ACMU work and further refinements m in the ACs have resulted m in a reduction m in analysis turnaround time (TAT).

  1. Pharmacokinetics of Continuous Infusion Meropenem With Concurrent Extracorporeal Life Support and Continuous Renal Replacement Therapy: A Case Report.

    Science.gov (United States)

    Cies, Jeffrey J; Moore, Wayne S; Conley, Susan B; Dickerman, Mindy J; Small, Christine; Carella, Dominick; Shea, Paul; Parker, Jason; Chopra, Arun

    2016-01-01

    Pharmacokinetic parameters can be significantly altered for both extracorporeal life support (ECLS) and continuous renal replacement therapy (CRRT). This case report describes the pharmacokinetics of continuous-infusion meropenem in a patient on ECLS with concurrent CRRT. A 2.8-kg, 10-day-old, full-term neonate born via spontaneous vaginal delivery presented with hypothermia, lethargy, and a ~500-g weight loss from birth. She progressed to respiratory failure on hospital day 2 (HD 2) and developed sepsis, disseminated intravascular coagulation, and liver failure as a result of disseminated adenoviral infection. By HD 6, acute kidney injury was evident, with progressive fluid overload >1500 mL (+) for the admission. On HD 6 venoarterial ECLS was instituted for lung protection and fluid removal. On HD 7 she was initiated on CRRT. On HD 12, a blood culture returned positive and subsequently grew Pseudomonas aeruginosa with a minimum inhibitory concentration (MIC) for meropenem of 0.25 mg/L. She was started on vancomycin, meropenem, and amikacin. A meropenem bolus of 40 mg/kg was given, followed by a continuous infusion of 10 mg/kg/hr (240 mg/kg/day). On HD 15 (ECLS day 9) a meropenem serum concentration of 21 mcg/mL was obtained, corresponding to a clearance of 7.9 mL/kg/min. Repeat cultures from HDs 13 to 15 (ECLS days 7-9) were sterile. This meropenem regimen was successful in providing a target attainment of 100% for serum concentrations above the MIC for ≥40% of the dosing interval and was associated with a sterilization of blood in this complex patient on concurrent ECLS and CRRT circuits.

  2. Forest classification trees and forest support vector machines algorithms: Demonstration using microarray data.

    Science.gov (United States)

    Zintzaras, Elias; Kowald, Axel

    2010-05-01

    Classification into multiple classes when the measured variables are outnumbered is a major methodological challenge in -omics studies. Two algorithms that overcome the dimensionality problem are presented: the forest classification tree (FCT) and the forest support vector machines (FSVM). In FCT, a set of variables is randomly chosen and a classification tree (CT) is grown using a forward classification algorithm. The process is repeated and a forest of CTs is derived. Finally, the most frequent variables from the trees with the smallest apparent misclassification rate (AMR) are used to construct a productive tree. In FSVM, the CTs are replaced by SVMs. The methods are demonstrated using prostate gene expression data for classifying tissue samples into four tumor types. For threshold split value 0.001 and utilizing 100 markers the productive CT consisted of 29 terminal nodes and achieved perfect classification (AMR=0). When the threshold value was set to 0.01, a tree with 17 terminal nodes was constructed based on 15 markers (AMR=7%). In FSVM, reducing the fraction of the forest that was used to construct the best classifier from the top 80% to the top 20% reduced the misclassification to 25% (when using 200 markers). The proposed methodologies may be used for identifying important variables in high dimensional data. Furthermore, the FCT allows exploring the data structure and provides a decision rule.

  3. Highly Selective Continuous Gas-Phase Methoxycarbonylation of Ethylene with Supported Ionic Liquid Phase (SILP) Catalysts

    DEFF Research Database (Denmark)

    Khokarale, Santosh Govind; Garcia Suárez, Eduardo José; Fehrmann, Rasmus

    2017-01-01

    Supported ionic liquid phase (SILP) technology was applied for the first time to the Pd-catalyzed continuous, gas-phase methoxycarbonylation of ethylene to selectively produce methyl propanoate (MP) in high yields. The influence of catalyst and reaction parameters such as, for example, ionic liqu...

  4. Supported Rh-phosphine complex catalysts for continuous gas-phase decarbonylation of aldehydes

    DEFF Research Database (Denmark)

    Malcho, Phillip; Garcia-Suarez, Eduardo J.; Mentzel, Uffe Vie;

    2014-01-01

    Heterogeneous silica supported rhodium-phosphine complex catalysts are employed for the first time in the catalytic decarbonylation of aldehydes in continuous gas-phase. The reaction protocol is exemplified for the decarbonylation of p-tolualdehyde to toluene and further extended to other aromatic...

  5. Continuous gas-phase hydroformylation of 1-butene using supported ionic liquid phase (SILP) catalysts

    DEFF Research Database (Denmark)

    Haumann, Marco; Dentler, Katharina; Joni, Joni;

    2007-01-01

    The concept of supported ionic liquid phase (SILP) catalysis has been extended to 1-butene hydroformylation. A rhodium-sulfoxantphos complex was dissolved in [BMIM][n-C8H17OSO3] and this solution was highly dispersed on silica. Continuous gas-phase experiments in a fixed-bed reactor revealed...

  6. The Internet: The Battle Continues. Organizations Join together to Support Free Speech.

    Science.gov (United States)

    Hall, H. L.; Wilson, Bradley

    1998-01-01

    Reports on continuing efforts to block free access to the Internet, and describes how several national organizations have formed an alliance to support free speech on the Internet. Includes the Internet Free Expression Alliance's mission statement and URLs for seven organizations that provide information on this issue. (SR)

  7. Development of an automated system for continuous monitoring of powered roof support in longwall panel

    Institute of Scientific and Technical Information of China (English)

    ATUL Kumar; DHEERAJ Kumar; SINGH U.K.; GUPTA P.S.

    2010-01-01

    Described the development of an Intrinsically Safe System for continuous monitoring of load and convergence of powered roof supports installed at longwall faces.The system developed for monitoring of behavior of a powered support in a mechanized longwall sublevel caving face. The logging system can be programmed for logging the data from the sensors at different logging intervals ranging from 16 h to 1 ms for logging variation in hydraulic pressures in legs and convergence of the support during progressive face advance. For recording dynamic loads, the data logger can be programmed to start fast logging, say at 10 ms intervals, when the pressure in a leg reaches a pre-specified threshold value, and continue fast logging until the pressure drops below this threshold value. This fast logging automatically stops when the pressure drops below this threshold value.

  8. FEATURES OF LONG-TERM MECHANICAL CIRCULATORY SUPPORT WITH CONTINUOUS-FLOW PUMP

    Directory of Open Access Journals (Sweden)

    G. P. Itkin

    2012-01-01

    Full Text Available In a review of the comparative analysis of methods and tools for long-term mechanical circulatory support with continuous flow and pulsatile flow implantable pumps. Particular attention is paid to the choice of the optimal modes of the operation of pumps based on the physical principles of the interaction between a the steady flow of blood to the pulsatile mechanics of the heart chambers. 

  9. Demonstration of the BNL Continuous Dual Trap Analyzer to Detect Perfluorocarbon Tracers for the Tag, Track and Location Program

    Energy Technology Data Exchange (ETDEWEB)

    Heiser,J.H.; Adams, J.; Dietz, R..; Milian, L.; Watson, T.

    2008-10-07

    The Tag, Track and Location System (TTL) Program is investigating methods of tracking an asset using perfluorocarbon tracers (PFT). The success of any TTL method requires sound detection/location instrumentation. Tracer Detection Technologies Corp (TDT), through a contract with the Office of Naval Research (ONR), is investigating different detection systems. The detections systems generally fall into two categories; proximity detectors and standoff detectors. Proximity detectors, as the name implies, need to be in close proximity (e.g., meter to 10's of meters) to the PFT source. Standoff detection searches for the PFT from a greater distance away from the source (e.g., 100's of meters to kilometers). Gas Chromatographs (GC) are generally considered a proximity detection systems, but in the case of PFTs should be considered for both proximity and standoff detection with the caveat that in standoff use the GC needs to be somewhere in the PFT plume, i.e., generally downwind of the source. With a properly sized PFT source, the right GC can afford fairly large standoff (distance from the source) distances; 100's of meters to kilometers downwind. Brookhaven National Laboratory (BNL) has such a GC system and offered to demonstrate the CDTA for TTL as a no cost addition to the TDTTTL project, of which BNL was a participant. BNL is a leading authority on the sampling, collection, release and detection of PFTs. In addition, the BNL team has extensive background in atmospheric dispersion, the application of PFTs to such studies and the development of applications utilizing PFTs such as building infiltration measurements, control room integrity determination, leak location and environmental investigations. This experience and expertise is essential in developing any PFT application were dispersion, dilution and overcoming environmental conditions and interferences are integral to success. BNL has developed sophisticated gas chromatography methods and

  10. Supporting continuous learning in a large organization: the role of group and organizational perspectives

    Energy Technology Data Exchange (ETDEWEB)

    Mulholland, Paul; Zdrahal, Zdenek; Domingue, John [Open Univ., Knowledge Media Inst., Milton Keynes (United Kingdom)

    2005-03-01

    Many organizations recognize the need to continuously adapt and learn in order to survive and remain competitive. Learning and therefore change in organizations is driven in two ways. First, there is strategically driven learning, motivated by high-level factors such as market changes, company mergers and newly emerging approaches to organizational management and workplace learning. These changes reveal themselves in the introduction of new training programmes, recruitment strategies and knowledge management methodologies. Second, there is local, continuous learning occurring from the ground up. This is revealed as workers become more adept at their job through experience and collaboration with colleagues. Continuous learning is more gradual and requires local autonomy. This paper describes an experiment in supporting local, continuous learning, and its dissemination, but driven by a strategic initiative of the organization. This work raised many issues concerning the difficulty of integrating local and global organizational influences on learning. We outline lessons learned and suggestions as to the extent to which it is possible to align continuous learning with a company-wide perspective. (Author)

  11. Supporting patients with type 1 diabetes using continuous subcutaneous insulin infusion therapy: Difficulties, disconnections, and disarray.

    Science.gov (United States)

    Perry, Lin; James, Steven; Gallagher, Robyn; Dunbabin, Janet; Steinbeck, Katharine; Lowe, Julia

    2017-08-01

    Use of continuous subcutaneous insulin infusion therapy in type 1 diabetes management is high. However, the incorporation of this technology into self-care is not without challenges, and the support of an appropriately skilled health care team is recommended. This study aimed to examine the support context for patients using continuous subcutaneous insulin infusion therapy from the health care professional perspective, as well as contextual influences for health care professionals and their patients. This ethnographic qualitative study was undertaken in New South Wales, Australia. Recruitment occurred using a snowball sampling technique, beginning with members of an established diabetes service group. Data were collected through the use of semistructured interviews undertaken by telephone and analysed using thematic analysis. Data were obtained from 26 interviews with staff from diverse professional backgrounds. An overarching theme of difficulties, disconnections, and disarray emerged, with findings indicating that participants perceived difficulties in relation to shortages of health care professional continuous subcutaneous insulin infusion-related expertise, and disconnected and disarrayed service structures and process, with barriers to access to these devices. Individual health care professionals were left to manage somehow or opted not to engage with related care. Findings provide insights from health care professionals' perspectives into the complexity of providing support for patients using continuous subcutaneous insulin infusion therapy across diverse contexts, and provide a platform for further research and service development. The need for consistent and coordinated care, and the infrastructure to facilitate this, flags an opportunity to drive integration of care and teamworking across as well as within settings and disciplines. © 2017 John Wiley & Sons, Ltd.

  12. Numerical simulations in support of the in situ bioremediation demonstration at Savannah River

    Energy Technology Data Exchange (ETDEWEB)

    Travis, B.J.; Rosenberg, N.D.

    1994-06-01

    This report assesses the performance of the in situ bioremediation technology demonstrated at the Savannah River Integrated Demonstration (SRID) site in 1992--1993. The goal of the technology demonstration was to stimulate naturally occurring methanotrophic bacteria at the SRID site with injection of methane, air and air-phase nutrients (nitrogen and phosphate) such that significant amounts of the chlorinated solvent present in the subsurface would be degraded. Our approach is based on site-specific numerical simulations using the TRAMP computer code. In this report, we discuss the interactions among the physical and biochemical processes involved in in situ bioremediation. We also investigate improvements to technology performance, make predictions regarding the performance of this technology over long periods of time and at different sites, and compare in situ bioremediation with other remediation technologies.

  13. "Dedicated To The Continued Education, Training and Demonstration of PEM Fuel Cell Powered Lift Trucks In Real-World Applications."

    Energy Technology Data Exchange (ETDEWEB)

    Dever, Thomas J.

    2011-11-29

    operating large fleets. As a long-standing lift truck dealership, LiftOne was able to introduce the fuel cells to such companies in the demanding applications. Accomplishments vs Objectives: We were successful in respect to the stated objectives. The Education Segment's H2 Education Sessions were able to introduce fuel cell technology to many companies and reached the intended broad audience. Also, demos of the lift truck at the sessions as well as the conferences; expos and area events provided great additional exposure. The Deployments were successful in allowing the 6 participating companies to test the 2 fuel cell powered lift trucks in their demanding applications. One of the 6 sites (BMW) eventually adopted over 80 fuel cells from Plug Power. LiftOne was one of the 3 fuel cell demonstrators at BMW for this trial and played a major role in helping to prove the viability and efficiency of this alternative form of energy for BMW. The other 5 companies that participated in the project's deployments were encouraged by the trials and while not converting over to fuel cell power at this time, expressed the desire to revisit acquisition scenarios in the near future as the cost of fuel cells and infrastructure continue to improve. The Education sessions began in March of 2009 at the 7 LiftOne Branches and continued throughout the duration of the project. Attendees came from a large base of lift truck users in North Carolina, South Carolina and Virginia. The sessions were free and invitations were sent out to potential users and companies with intrigue. In addition to the Education content at the sessions (which was offered in a 'H2 101' format), LiftOne was able to demonstrate a working fuel cell powered lift truck, which proved to be a big draw with the 'hands on' experience. LiftOne also demo'd the fuel cell lift trucks at many conferences, expos, professional association meetings, trade shows and 'Green' events in major cities

  14. [Characteristics and operation of enhanced continuous bio-hydrogen production reactor using support carrier].

    Science.gov (United States)

    Ren, Nan-qi; Tang, Jing; Gong, Man-li

    2006-06-01

    A kind of granular activated carbon, whose granular size is no more than 2mm and specific gravity is 1.54g/cm3, was used as the support carrier to allow retention of activated sludge within a continuous stirred-tank reactor (CSTR) using molasses wastewater as substrate for bio-hydrogen production. Continuous operation characteristics and operational controlling strategy of the enhanced continuous bio-hydrogen production system were investigated. It was indicated that, support carriers could expand the activity scope of hydrogen production bacteria, make the system fairly stable in response to organic load impact and low pH value (pH reactor at low HRT. The reactor with ethanol-type fermentation achieved an optimal hydrogen production rate of 0.37L/(g x d), while the pH value ranged from 3.8 to 4.4, and the hydrogen content was approximately 40% approximately 57% of biogas. It is effective to inhibit the methanogens by reducing the pH value of the bio-hydrogen production system, consequently accelerate the start-up of the reactor.

  15. Implementation and Demonstration of Grid Frequency Support by V2G Enabled Electric Vehicle

    DEFF Research Database (Denmark)

    Martinenas, Sergejus; Marinelli, Mattia; Andersen, Peter Bach

    2014-01-01

    of electric vehicles - faster and with better precision, using Vehicle-to-Grid technology. This paper explores the implementation of a system that demonstrates the use of the electric vehicles for providing frequency regulation in the Danish power grid. The system is tested with the use case of Primary...

  16. Continuous daylight in the high-Arctic summer supports high plankton respiration rates compared to those supported in the dark

    KAUST Repository

    Mesa, Elena

    2017-04-21

    Plankton respiration rate is a major component of global CO2 production and is forecasted to increase rapidly in the Arctic with warming. Yet, existing assessments in the Arctic evaluated plankton respiration in the dark. Evidence that plankton respiration may be stimulated in the light is particularly relevant for the high Arctic where plankton communities experience continuous daylight in spring and summer. Here we demonstrate that plankton community respiration evaluated under the continuous daylight conditions present in situ, tends to be higher than that evaluated in the dark. The ratio between community respiration measured in the light (Rlight) and in the dark (Rdark) increased as the 2/3 power of Rlight so that the Rlight:Rdark ratio increased from an average value of 1.37 at the median Rlight measured here (3.62 µmol O2 L-1 d-1) to an average value of 17.56 at the highest Rlight measured here (15.8 µmol O2 L-1 d-1). The role of respiratory processes as a source of CO2 in the Arctic has, therefore, been underestimated and is far more important than previously believed, particularly in the late spring, with 24 h photoperiods, when community respiration rates are highest.

  17. A solid-supported organocatalyst for continuous-flow enantioselective aldol reactions.

    Science.gov (United States)

    Ayats, Carles; Henseler, Andrea H; Pericàs, Miquel A

    2012-02-13

    Asymmetric aldol reactions catalyzed by a novel polystyrene-immobilized proline derivative occur in short reaction times with excellent diastereo- and enantioselectivity. The catalyst can be recovered by simple filtration and shows very high reusability. The high activity depicted by the supported catalyst and its chemical and mechanical stability have allowed its application in packed-bed reactors for continuous flow processing. This system can produce enantio- and diastereomerically pure aldol adducts under continuous flow conditions with a residence time of 26 min. Furthermore, the reactor allowed processing of four different aldol products in sequence without any decrease in both catalytic activity and optical purity. The effective catalyst loading could be reduced to 1.6% (six-fold reduction of catalyst loading compared to the corresponding batch process).

  18. "Dedicated To The Continued Education, Training and Demonstration of PEM Fuel Cell Powered Lift Trucks In Real-World Applications."

    Energy Technology Data Exchange (ETDEWEB)

    Dever, Thomas J.

    2011-11-29

    operating large fleets. As a long-standing lift truck dealership, LiftOne was able to introduce the fuel cells to such companies in the demanding applications. Accomplishments vs Objectives: We were successful in respect to the stated objectives. The Education Segment's H2 Education Sessions were able to introduce fuel cell technology to many companies and reached the intended broad audience. Also, demos of the lift truck at the sessions as well as the conferences; expos and area events provided great additional exposure. The Deployments were successful in allowing the 6 participating companies to test the 2 fuel cell powered lift trucks in their demanding applications. One of the 6 sites (BMW) eventually adopted over 80 fuel cells from Plug Power. LiftOne was one of the 3 fuel cell demonstrators at BMW for this trial and played a major role in helping to prove the viability and efficiency of this alternative form of energy for BMW. The other 5 companies that participated in the project's deployments were encouraged by the trials and while not converting over to fuel cell power at this time, expressed the desire to revisit acquisition scenarios in the near future as the cost of fuel cells and infrastructure continue to improve. The Education sessions began in March of 2009 at the 7 LiftOne Branches and continued throughout the duration of the project. Attendees came from a large base of lift truck users in North Carolina, South Carolina and Virginia. The sessions were free and invitations were sent out to potential users and companies with intrigue. In addition to the Education content at the sessions (which was offered in a 'H2 101' format), LiftOne was able to demonstrate a working fuel cell powered lift truck, which proved to be a big draw with the 'hands on' experience. LiftOne also demo'd the fuel cell lift trucks at many conferences, expos, professional association meetings, trade shows and 'Green' events in major cities

  19. Development of a Supporting System of the Business Continuity Plan (BCP) for Construction Companies

    Science.gov (United States)

    Mano, Kouhei; Shiraki, Wataru; Inomo, Hitoshi; Kuyama, Hironori; Isouchi, Chikako

    Recently, the natural disaster and the accident have happened frequently. Thus, many companies and local organizations had been suffered such as discontinuity of business, loss of profits, customers' confidence decrease, and tremendous damage out of business. Especially the business stop of construction companies are influenced the recovery activities, so that it could be late the rescue activities. In this study, a supporting system of the business continuity plan (BCP) for construction companies is developed using the web server and database, and then some ideas for the user's friendly system are considered.

  20. Self-similar continuous cascades supported by random Cantor sets. Application to rainfall data

    CERN Document Server

    Muzy, J F

    2016-01-01

    We introduce a variant of continuous random cascade models that extends former constructions introduced by Barral-Mandelbrot and Bacry-Muzy in the sense that they can be supported by sets of arbitrary fractal dimension. The so introduced sets are exactly self-similar stationary versions of random Cantor sets formerly introduced by Mandelbrot as "random cutouts". We discuss the main mathematical properties of our construction and compute its scaling properties. We then illustrate our purpose on several numerical examples and we consider a possible application to rainfall data. We notably show that our model allows us to reproduce remarkably the distribution of dry period durations.

  1. Demonstration of Isothermal Compressed Air Energy Storage to Support Renewable Energy Production

    Energy Technology Data Exchange (ETDEWEB)

    Bollinger, Benjamin [Sustainx, Incorporated, Seabrook, NH (United States)

    2015-01-02

    This project develops and demonstrates a megawatt (MW)-scale Energy Storage System that employs compressed air as the storage medium. An isothermal compressed air energy storage (ICAESTM) system rated for 1 MW or more will be demonstrated in a full-scale prototype unit. Breakthrough cost-effectiveness will be achieved through the use of proprietary methods for isothermal gas cycling and staged gas expansion implemented using industrially mature, readily-available components.The ICAES approach uses an electrically driven mechanical system to raise air to high pressure for storage in low-cost pressure vessels, pipeline, or lined-rock cavern (LRC). This air is later expanded through the same mechanical system to drive the electric motor as a generator. The approach incorporates two key efficiency-enhancing innovations: (1) isothermal (constant temperature) gas cycling, which is achieved by mixing liquid with air (via spray or foam) to exchange heat with air undergoing compression or expansion; and (2) a novel, staged gas-expansion scheme that allows the drivetrain to operate at constant power while still allowing the stored gas to work over its entire pressure range. The ICAES system will be scalable, non-toxic, and cost-effective, making it suitable for firming renewables and for other grid applications.

  2. 20 CFR 10.502 - How does OWCP evaluate evidence in support of continuing receipt of compensation benefits?

    Science.gov (United States)

    2010-04-01

    ... continuing receipt of compensation benefits? 10.502 Section 10.502 Employees' Benefits OFFICE OF WORKERS... THE FEDERAL EMPLOYEES' COMPENSATION ACT, AS AMENDED Continuing Benefits Rules and Evidence § 10.502 How does OWCP evaluate evidence in support of continuing receipt of compensation benefits? In...

  3. 20 CFR 10.501 - What medical evidence is necessary to support continuing receipt of compensation benefits?

    Science.gov (United States)

    2010-04-01

    ... continuing receipt of compensation benefits? 10.501 Section 10.501 Employees' Benefits OFFICE OF WORKERS... THE FEDERAL EMPLOYEES' COMPENSATION ACT, AS AMENDED Continuing Benefits Rules and Evidence § 10.501 What medical evidence is necessary to support continuing receipt of compensation benefits? (a) The...

  4. Labour-based construction, testing and monitoring of proof-of-concept ultrathin continuously reinforced concrete pavement technology demonstrators

    CSIR Research Space (South Africa)

    Dlamini, N

    2011-09-01

    Full Text Available presentation to the RRA board of directors that outlined the advantages of Ultrathin Continuously Reinforced Concrete Pavements (UTCRCP). From this presentation the board initiated a meeting between the members of the RRA namely SIRDC, CSIR and BOTEC. Aurecon...

  5. 76 FR 12081 - Notice of Two-Year Continuation of Disease Management Demonstration Project for TRICARE Standard...

    Science.gov (United States)

    2011-03-04

    ... failure, diabetes, COPD, depression, anxiety, and cancer, have been included in the current program... identified with the disease states of asthma, heart failure, and diabetes. TMA now intends to continue the... have included, but have not been limited to: Clinical preventive examinations, patient education...

  6. An educational intervention on promotion of breast feeding complemented by continuing support.

    Science.gov (United States)

    Neyzi, O; Güleçyüz, M; Dinçer, Z; Olgun, P; Kutluay, T; Uzel, N; Saner, G

    1991-07-01

    The study, aiming to document the effect of continued support for mothers on frequency of exclusive breast feeding, was carried out by inclusion of breast feeding counselling in the context of well-baby care. One hundred and forty-six mothers who had been exposed to two educational sessions on breast feeding after delivery were given appointments to bring their baby to the paediatric hospital for well-baby care. The mother-infant pairs were followed by the same two residents for 4 months. Mean number of visits was six. A conscious effort was made during all visits to influence the mothers and their close relatives towards exclusive breast feeding. It was observed that in a large proportion of the infants, breast milk was being supplemented with water at the time of the first visit and no further effort was made to change this traditional behaviour. Comparison of the results with a group of mothers who had been exposed to similar educational sessions after delivery but without further support showed a striking increase in frequency of exclusive breast feeding (breast milk and water) in the supported group.

  7. First demonstration and performance of an injection locked continuous wave magnetron to phase control a superconducting cavity

    Energy Technology Data Exchange (ETDEWEB)

    A.C. Dexter, G. Burt, R.G. Carter, I. Tahir, H. Wang, K. Davis, R. Rimmer

    2011-03-01

    The applications of magnetrons to high power proton and cw electron linacs are discussed. An experiment is described where a 2.45 GHz magnetron has been used to drive a single cell superconducting cavity. With the magnetron injection locked, a modest phase control accuracy of 0.95° rms has been demonstrated. Factors limiting performance have been identified.

  8. Demonstration of shield-type longwall supports at York Canyon Mine of Kaiser Steel Corporation. Final technical report A

    Energy Technology Data Exchange (ETDEWEB)

    Lawrence, R.G.; King, R.

    1980-04-01

    This report represents work on a program that was originated by the USBM of the Department of the Interior and was transferred to the Department of Energy on October 1, 1977. A demonstration with the Government funded Hemscheidt 320 HSL caliper type shield supports was conducted at three longwall panels of Kaiser Steel Corporation's York Canyon Mine. The purpose of this longwall demonstration was to provide the US coal industry with information on all aspects of shield longwall mining in high seams. The demonstration provided a working model for the coal industry and during the project, 350 people from the industry, schools, and government agencies visited the demonstration. They were provided with a first hand knowledge of a working shield longwall. The demonstration showed that the control of large coal lumps may be a problem in the mining of coal seam thicker than 8 feet. Mining with shield type supports provided good working conditions and a safe working environment. The shield requires very little maintenance and has a high mechanical availability.

  9. Device-Related Thrombosis in Continuous-Flow Left Ventricular Assist Device Support.

    Science.gov (United States)

    Doligalski, Christina Teeter; Jennings, Douglas L

    2016-02-01

    Advanced heart failure therapy has been revolutionized with the advent of continuous-flow ventricular assist devices (CF-LVADs) which have improved both survival and quality of life. Despite this, support with CF-LVADs is frequently complicated, with 70% of recipients experiencing a major complication in the first year of durable support. The most concerning of these complications to emerge is device-related thrombosis, which is associated with increased morbidity and mortality. Pathophysiology and diagnosis are multifaceted and complex, with pump-specific and patient-specific factors to be considered. Incidence estimates are evolving with increases seen in the past 2 years compared with earlier implant data. Evidence for treatment is limited to case series and reports, which are subject to significant publication bias. Finally, appropriate primary and secondary prophylaxis is imprecise with multiple antiplatelet and antithrombotic strategies described. This review seeks to summarize the current literature surrounding the pathophysiology, diagnosis, and management of thrombosis in CF-LVAD recipients.

  10. Palpability Support Demonstrated

    DEFF Research Database (Denmark)

    Brønsted, Jeppe; Grönvall, Erik; Fors, David

    2007-01-01

    In ubiquitous computing, as more and more devices are embedded into the environment, there is a risk that the user loses the understanding of the system. In normal use this is not always a problem, but when breakdowns occur it is crucial that the user understands the system to be able to handle...

  11. Noninvasive respiratory support of juvenile rabbits by high-amplitude bubble continuous positive airway pressure.

    Science.gov (United States)

    Diblasi, Robert M; Zignego, Jay C; Tang, Dennis M; Hildebrandt, Jack; Smith, Charles V; Hansen, Thomas N; Richardson, C Peter

    2010-06-01

    Bubble continuous positive airway pressure (B-CPAP) applies small-amplitude, high-frequency oscillations in airway pressure (DeltaPaw) that may improve gas exchange in infants with respiratory disease. We developed a device, high-amplitude B-CPAP (HAB-CPAP), which provides greater DeltaPaw than B-CPAP provides. We studied the effects of different operational parameters on DeltaPaw and volumes of gas delivered to a mechanical infant lung model. In vivo studies tested the hypothesis that HAB-CPAP provides noninvasive respiratory support greater than that provided by B-CPAP. Lavaged juvenile rabbits were stabilized on ventilator nasal CPAP. The animals were then supported at the same mean airway pressure, bias flow, and fraction of inspired oxygen (FiO2) required for stabilization, whereas the bubbler angle was varied in a randomized crossover design at exit angles, relative to vertical, of 0 (HAB-CPAP0; equivalent to conventional B-CPAP), 90 (HAB-CPAP90), and 135 degrees (HAB-CPAP135). Arterial blood gases and pressure-rate product (PRP) were measured after 15 min at each bubbler angle. Pao2 levels were higher (p<0.007) with HAB-CPAP135 than with conventional B-CPAP. PaCO2 levels did not differ (p=0.073) among the three bubbler configurations. PRP with HAB-CPAP135 were half of the PRP with HAB-CPAP0 or HAB-CPAP90 (p=0.001). These results indicate that HAB-CPAP135 provides greater respiratory support than conventional B-CPAP does.

  12. Continuous assessment of land mapping accuracy at High Resolution from global networks of atmospheric and field observatories -concept and demonstration

    Science.gov (United States)

    Sicard, Pierre; Martin-lauzer, François-regis

    2017-04-01

    In the context of global climate change and adjustment/resilience policies' design and implementation, there is a need not only i. for environmental monitoring, e.g. through a range of Earth Observations (EO) land "products" but ii. for a precise assessment of uncertainties of the aforesaid information that feed environmental decision-making (to be introduced in the EO metadata) and also iii. for a perfect handing of the thresholds which help translate "environment tolerance limits" to match detected EO changes through ecosystem modelling. Uncertainties' insight means precision and accuracy's knowledge and subsequent ability of setting thresholds for change detection systems. Traditionally, the validation of satellite-derived products has taken the form of intensive field campaigns to sanction the introduction of data processors in Payload Data Ground Segments chains. It is marred by logistical challenges and cost issues, reason why it is complemented by specific surveys at ground-based monitoring sites which can provide near-continuous observations at a high temporal resolution (e.g. RadCalNet). Unfortunately, most of the ground-level monitoring sites, in the number of 100th or 1000th, which are part of wider observation networks (e.g. FLUXNET, NEON, IMAGINES) mainly monitor the state of the atmosphere and the radiation exchange at the surface, which are different to the products derived from EO data. In addition they are "point-based" compared to the EO cover to be obtained from Sentinel-2 or Sentinel-3. Yet, data from these networks, processed by spatial extrapolation models, are well-suited to the bottom-up approach and relevant to the validation of vegetation parameters' consistency (e.g. leaf area index, fraction of absorbed photosynthetically active radiation). Consistency means minimal errors on spatial and temporal gradients of EO products. Test of the procedure for land-cover products' consistency assessment with field measurements delivered by worldwide

  13. Long-term costs and health impact of continued global fund support for antiretroviral therapy.

    Directory of Open Access Journals (Sweden)

    John Stover

    Full Text Available BACKGROUND: By the end of 2011 Global Fund investments will be supporting 3.5 million people on antiretroviral therapy (ART in 104 low- and middle-income countries. We estimated the cost and health impact of continuing treatment for these patients through 2020. METHODS AND FINDINGS: Survival on first-line and second-line ART regimens is estimated based on annual retention rates reported by national AIDS programs. Costs per patient-year were calculated from country-reported ARV procurement prices, and expenditures on laboratory tests, health care utilization and end-of-life care from in-depth costing studies. Of the 3.5 million ART patients in 2011, 2.3 million will still need treatment in 2020. The annual cost of maintaining ART falls from $1.9 billion in 2011 to $1.7 billion in 2020, as a result of a declining number of surviving patients partially offset by increasing costs as more patients migrate to second-line therapy. The Global Fund is expected to continue being a major contributor to meeting this financial need, alongside other international funders and domestic resources. Costs would be $150 million less in 2020 with an annual 5% decline in first-line ARV prices and $150-370 million less with a 5%-12% annual decline in second-line prices, but $200 million higher in 2020 with phase out of stavudine (d4T, or $200 million higher with increased migration to second-line regimens expected if all countries routinely adopted viral load monitoring. Deaths postponed by ART correspond to 830,000 life-years saved in 2011, increasing to around 2.3 million life-years every year between 2015 and 2020. CONCLUSIONS: Annual patient-level direct costs of supporting a patient cohort remain fairly stable over 2011-2020, if current antiretroviral prices and delivery costs are maintained. Second-line antiretroviral prices are a major cost driver, underscoring the importance of investing in treatment quality to improve retention on first-line regimens.

  14. Evaluating a Program Designed to Demonstrate Continuous Improvement in Teaching at an AACSB-Accredited College of Business at a Regional University: A Case Study

    Science.gov (United States)

    Pritchard, Robert E.; Saccucci, Michael S.; Potter, Gregory C.

    2010-01-01

    This article provides a detailed statistical analysis of a process intended to demonstrate continuous improvement in teaching at an AACSB accredited college of business. The Educational Testing Service's SIR II student evaluation instrument was used to measure teaching effectiveness. A six-year longitudinal analysis of the SIR II results does not…

  15. Parent Support and Stress among First-Generation and Continuing-Generation Female Students during the Transition to College

    Science.gov (United States)

    Sy, Susan R.; Fong, Kristen; Carter, Rebecca; Boehme, Julia; Alpert, Amy

    2012-01-01

    This study compares first-generation and continuing-generation female college students in terms of: (a) level of parents' emotional and informational support; (b) level of students' stress; and (c) the relationship between both types of parent support and students' stress during the transition to college. We collected survey data from an…

  16. Parent Support and Stress among First-Generation and Continuing-Generation Female Students during the Transition to College

    Science.gov (United States)

    Sy, Susan R.; Fong, Kristen; Carter, Rebecca; Boehme, Julia; Alpert, Amy

    2012-01-01

    This study compares first-generation and continuing-generation female college students in terms of: (a) level of parents' emotional and informational support; (b) level of students' stress; and (c) the relationship between both types of parent support and students' stress during the transition to college. We collected survey data from an…

  17. Continued Advancement of Supported Liquid Membranes for Carbon Dioxide Control in Extravehicular Activity Applications

    Science.gov (United States)

    Wickham, David T.; Gleason, Kevin J.; Engel, Jeffrey R.; Cowley, Scott W.; Chullen, Cinda

    2015-01-01

    The Development of a new, robust, portable life support system (PLSS) is currently a high NASA priority in order to support longer and safer extravehicular activity (EVA) missions that will be necessary as space travel extends to near-Earth asteroids and eventually Mars. One of the critical PLSS functions is maintaining the carbon dioxide (CO2) concentration in the suit at acceptable levels. The Metal Oxide (MetOx) canister has a finite CO2 adsorption capacity and therefore in order to extend mission times, the unit would have to be larger and heavier, which is undesirable; therefore new CO2 control technologies must be developed. While recent work has centered on the use of alternating sorbent beds that can be regenerated during the EVA, this strategy increases the system complexity and power consumption. A simpler approach is to use a membrane that vents CO2 to space but retains oxygen(O2). A membrane has many advantages over current technology: it is a continuous system with no theoretical capacity limit, it requires no consumables, and it requires no hardware for switching beds between absorption and regeneration. Conventional gas separation membranes do not have adequate selectivity for use in the PLSS, but the required performance could be obtained with a supported liquid membrane (SLM), which consists of a microporous film filled with a liquid that selectively reacts with CO2 over oxygen (O2). In a recently completed Phase II Small Business Innovative Research project, Reaction Systems developed a new reactive liquid that has effectively zero vapor pressure, making it an ideal candidate for use in an SLM. Results obtained with the SLM in a flat sheet configuration with representative pressures of CO2, O2, and water (H2O) have shown that the CO2 permeation rate and CO2/O2 selectivity requirements have been met. In addition, the SLM vents moisture to space very effectively. The SLM has also been prepared and tested in a hollow fiber form, which will be

  18. A study of different supports for the catalytic reduction of nitrates from natural water with a continuous reactor

    OpenAIRE

    Palomares, A.E.; Franch, C.; Corma,A.

    2011-01-01

    The aim of this work is to study the activity for the nitrate catalytic reduction in natural water, using a continuous stirred tank reactor, of Pd/Cu and Pd/Sn catalysts supported on different materials. The studied supports are: -Al2O3 (commercial), active carbon, graphite, hydrotalcite and alumina synthesized in our laboratory with a high surface area. The activity and selectivity of the catalysts supported on these materials have been compared. The best results have been obtain...

  19. The proliferation of multidisciplinary team meetings (MDTMs): how can radiology departments continue to support them all?

    Energy Technology Data Exchange (ETDEWEB)

    Balasubramaniam, Ravivarma; Subesinghe, Manil; Smith, Jonathan T. [St. James' University Hospital, Leeds Teaching Hospitals NHS Trust, Department of Clinical Radiology, Leeds (United Kingdom)

    2015-12-15

    To quantify the changes in multidisciplinary team meeting (MDTM) workload for consultant radiologists working in a single UK tertiary referral cancer institution, assess its impact and suggest solutions to these challenges. The annual number of MDTM cases was collated over a 5-year period (2009 - 2013). Qualitative information was obtained through questionnaire-based interviews of 47 consultant radiologists. Data analysed included number of MDTMs involved with, type of MDTM (oncological or non-oncological), time allocation for preparation and perceived deficiencies in the current MDTM. Thirteen thousand and forty-nine cases were discussed in MDTMs in 2009 with a continued yearly increase over the 5-year period. Fifty-five percent of MDTM attendances were at oncological MDTMs. Consultant radiologists attended a median of two MDTMs per week, each requiring 4 hours time commitment; 60 % used out-of-hours time for MDTM preparation. The most frequently cited MDTM deficiency was lack of sufficient clinical input. The MDTM is a challenging but worthwhile demand on the modern radiologist's time. Solutions to the increasing MDTM workload include demonstration of the benefits of MDTMs to hospital administrators to justify additional resources required, improving MDTM efficiency and ensuring this increased workload is accurately represented and remunerated in individual job plans. (orig.)

  20. Demonstration for the Applicability of the EPRI ETSS on the SG Tube Wear Defects Formed at the Tube Support Structure

    Energy Technology Data Exchange (ETDEWEB)

    Shin, Ki Seok; Cheon, Keun Young; Nam, Min Woo [Korea Hydro and Nuclear Power Co. Ltd, Daejeon (Korea, Republic of); Min, Kyong Mahn [Universal Monitoring and Inspection Inc., Daejeon (Korea, Republic of)

    2013-10-15

    In this paper, the authorized EPRI ETSS 27906.2 applied to the detection of tapered wear volumetric indications and depth sizing within the free span area, loose part not present was reviewed and applied to the site SG tubes for getting the actual value of the wear depth and providing structural integrity interpretation based on engineering evaluation. The experiment to demonstrate the applicability of EPRI ETSS was performed by the employment of the newly prepared STD tube and resulted in ensuring the effectiveness and equivalency of the EPRI ETSS as well. The authorized EPRI ETSS 27906.2 for getting the actual value of the wear depth and providing structural integrity interpretation based on engineering evaluation was reviewed and applied to the site SG tubes. The testing results were reviewed with the influences of SG tube material and the support structure. The impact of the tube materials was insignificant and that of the tube support structure showed somewhat conservative results. The testing resulted in successful demonstration of applicability of the EPRI ETSS on the SG tube wear defects at the tube support. One of the major flaw mechanisms detected in the currently operating domestic OPR-1000 pressurized water reactors(PWR's) steam generator(SG) tubes is wear defect. In general, wear defect has been constantly detected in the upper tube bundle imposed to the flow induced vibration interaction between tube and its support structure, and the quantity of the affected tubes has also shown the tendency to increase as plant operation life is added. In order to take appropriate measures and maintain the structural integrity for the SG tubes, wear defect is currently categorized as active damage mechanism and the tubes containing 40% or greater wear depth of the nominal tube wall thickness shall be plugged per SGMP(SG Management Program) Recently, a fairly large amplitude of wear defects on the Batwing(BW), one of the upper tube support structures in the SG

  1. Scale-up of counter-current chromatography: demonstration of predictable isocratic and quasi-continuous operating modes from the test tube to pilot/process scale.

    Science.gov (United States)

    Sutherland, Ian; Hewitson, Peter; Ignatova, Svetlana

    2009-12-11

    Predictable scale-up from test tube derived distribution ratios and analytical-scale sample loading optimisation is demonstrated using a model sample system of benzyl alcohol and p-cresol in a heptane:ethyl acetate:methanol:water phase system with the new 18 L Maxi counter-current chromatography centrifuge. The versatility of having a liquid stationary phase with its high loading capacity and flexible operating modes is demonstrated at two different scales by separating and concentrating target compounds using a mixture of caffeine, vanillin, naringenin and carvone using a quasi-continuous technique called intermittent counter-current extraction.

  2. SUPPORT FOR THE COMPLETION OF THE ARM PROJECT AND DEVELOPMENT OF A FIELD DEMONSTRATION OF THE GWIS MODEL FOR A VIRTUAL ENTERPRISE

    Energy Technology Data Exchange (ETDEWEB)

    F. DAVID MARTIN; MARK B. MURPHY - STRATEGIC TECHNOLOGY RESOURCES, LLC

    1999-12-31

    Strategic Technology Resources, L.L.C. (STR) provided work for Los Alamos National Laboratory (LANL) in response to Request for Proposal 005BZ0019-35. The objectives of the work in this project were to: (1) support the completion of the Advanced Reservoir Management (ARM) cooperative research and development agreement (CRADA) LA9502037, and (2) support the development of a field demonstration of the LANL-developed Global Weapons Information System (GWIS) model for virtual enterprises. The second objective was contingent upon DOE approval of the Advanced Information Management (AIM) CRADA. At the request of the LANL Technical Representative, the project was granted a no-cost extension to November 30, 1999. As part of the project, STR provided managerial support for the ARM CRADA by: (1) assessing the data resources of the participating companies, (2) facilitating the transfer of technical data to LANL, (3) preparing reports, (4) managing communications between the parties to the ARM CRADA, and (5) assisting with the dissemination of information between the parties to technical professional societies and trade associations. The first phase of the current project was to continue to engage subcontractors to perform tasks in the ARM CRADA for which LANL expertise was lacking. All of the ARM field studies required of the project were completed, and final reports for all of the project studies are appended to this final report. The second phase of the current project was to support the field demonstration of the GWIS model for virtual enterprises in an oilfield setting. STR developed a hypertext Webpage that describes the concept and implementation of a virtual enterprise for reservoir management in the petroleum industry. Contents of the hypertext document are included in this report on the project.

  3. Development of virtual research environment for regional climatic and ecological studies and continuous education support

    Science.gov (United States)

    Gordov, Evgeny; Lykosov, Vasily; Krupchatnikov, Vladimir; Bogomolov, Vasily; Gordova, Yulia; Martynova, Yulia; Okladnikov, Igor; Titov, Alexander; Shulgina, Tamara

    2014-05-01

    Volumes of environmental data archives are growing immensely due to recent models, high performance computers and sensors development. It makes impossible their comprehensive analysis in conventional manner on workplace using in house computing facilities, data storage and processing software at hands. One of possible answers to this challenge is creation of virtual research environment (VRE), which should provide a researcher with an integrated access to huge data resources, tools and services across disciplines and user communities and enable researchers to process structured and qualitative data in virtual workspaces. VRE should integrate data, network and computing resources providing interdisciplinary climatic research community with opportunity to get profound understanding of ongoing and possible future climatic changes and their consequences. Presented are first steps and plans for development of VRE prototype element aimed at regional climatic and ecological monitoring and modeling as well as at continuous education and training support. Recently developed experimental software and hardware platform aimed at integrated analysis of heterogeneous georeferenced data "Climate" (http://climate.scert.ru/, Gordov et al., 2013; Shulgina et al., 2013; Okladnikov et al., 2013) is used as a VRE element prototype and approach test bench. VRE under development will integrate on the base of geoportal distributed thematic data storage, processing and analysis systems and set of models of complex climatic and environmental processes run on supercomputers. VRE specific tools are aimed at high resolution rendering on-going climatic processes occurring in Northern Eurasia and reliable and found prognoses of their dynamics for selected sets of future mankind activity scenaria. Currently the VRE element is accessible via developed geoportal at the same link (http://climate.scert.ru/) and integrates the WRF and «Planet Simulator» models, basic reanalysis and instrumental

  4. Individual Patient Support on Lower Leg Orthoses by Continuous Control over the Whole Gait Cycle

    DEFF Research Database (Denmark)

    Matthias Braun, Jan; Manoonpong, Poramate; Wörgötter, Florentin

    2016-01-01

    with gait samples. It allows continuous control over the whole gait cycle based on the tracking of gait progress and makes no assumption on the patient’s abilities. We conclude that the smoothness and linearity of the gait progress tracking allows continuous control which enhances the patient group....

  5. Therapeutic drug monitoring of continuous-infusion acylovir for disseminated herpes simplex virus infection in a neonate receiving concurrent extracorporeal life support and continuous renal replacement therapy.

    Science.gov (United States)

    Cies, Jeffrey J; Moore, Wayne S; Miller, Kyle; Small, Christine; Carella, Dominick; Conley, Susan; Parker, Jason; Shea, Paul; Chopra, Arun

    2015-02-01

    Disseminated herpes simplex virus (HSV) infection in neonates represents a devastating entity that yields high mortality. Acyclovir is the primary antiviral agent used to treat life-threatening HSV infections in neonates; however, even though the agent has reduced morbidity overall from these infections, mortality with disseminated disease remains high. Currently, to our knowledge, no data exist regarding therapeutic drug monitoring of acyclovir in the setting of extracorporeal life support (ECLS) or continuous renal replacement therapy (CRRT) coupled with ECLS. We describe the case of a 14-day-old female with disseminated HSV-1 infection that progressed to fulminant hepatic and renal failure, necessitating the use of ECLS for hemodynamic support and CRRT as a treatment modality for hepatic and renal failure. The standard dosage of acyclovir 20 mg/kg/dose intravenously every 8 hours had been initiated, but after conversion to ECLS and CRRT, the patient's dosage was increased to 30 mg/kg/dose every 8 hours. After a repeat viral load remained unchanged from the initial viral load at 1 × 10(8)  copies/ml, the patient was transitioned from intermittent dosing to a continuous infusion of acyclovir added to the dialysate solution for CRRT at a concentration of 5.5 mg/L. To provide an optimal outcome, dosing was designed to maintain acyclovir plasma concentrations of at least 3 mg/L in order to maintain an acyclovir concentration of at least 1 mg/L in the cerebrospinal fluid. The patient's acyclovir serum concentrations measured at 24 and 72 hours after starting continuous-infusion acyclovir via the dialysate were 8.8 and 5.3 mg/L, respectively, allowing for a continuous serum concentration above 3 mg/L. Unfortunately, before a repeat viral load could be obtained to assess the efficacy of the continuous infusion acyclovir, the patient experienced an intracerebral hemorrhage as a complication related to ECLS after which technological support was withdrawn

  6. Effect of nonlinearity of restrainer and supports on the elasto-plastic seismic response of continuous girder bridge

    Directory of Open Access Journals (Sweden)

    Wang Changfeng

    2014-10-01

    Full Text Available During an earthquake, the nonlinearity of the bridge structure mainly occurs at the supports, bridge piers and restrainers. When entering nonlinear stage, members of the bridge structure affect the elasto-plastic seismic response of the whole structure to a certain extent; for multi-span continuous bridges, longitudinal restrainers can be installed on the movable piers to optimise the distribution of seismic force and enable the movable piers to bear a certain amount of seismic effect. In order to evaluate the effect of nonlinearity of restrainer and supports on the elasto-plastic seismic response of continuous girder bridge, analytical models of continuous girder bridge structure considering the nonlinearity of movable supports, restrainers and bridge piers were built and the nonlinear time history analysis was conducted to evaluate the effect of nonlinearity of restraining devices and supports on the elasto-plastic seismic response of continuous girder bridge. Relevant structural measures and recommendation were made to reduce the seismic response of the fixed piers of the continuous girder bridge.

  7. Assessment of Carbon Tetrachloride Groundwater Transport in Support of the Hanford Carbon Tetrachloride Innovative Technology Demonstration Program

    Energy Technology Data Exchange (ETDEWEB)

    Truex, Michael J.; Murray, Christopher J.; Cole, Charles R.; Cameron, Richard J.; Johnson, Michael D.; Skeen, Rodney S.; Johnson, Christian D.

    2001-07-13

    Groundwater modeling was performed in support of the Hanford Carbon Tetrachloride Innovative Treatment Remediation Demonstration (ITRD) Program. The ITRD program is facilitated by Sandia National Laboratory for the Department of Energy Office of Science and Technology. This report was prepared to document the results of the modeling effort and facilitate discussion of characterization and remediation options for the carbon tetrachloride plume among the ITRD participants. As a first step toward implementation of innovative technologies for remediation of the carbon tetrachloride (CT) plume underlying the 200-West Area, this modeling was performed to provide an indication of the potential impact of the CT source on the compliance boundary approximately 5000 m distant. The primary results of the modeling bracket the amount of CT source that will most likely result in compliance/non-compliance at the boundary and the relative influence of the various modeling parameters.

  8. HeartWare third-generation implantable continuous flow pump as biventricular support: mid-term follow-up.

    Science.gov (United States)

    Loforte, Antonio; Monica, Paola Lilla Della; Montalto, Andrea; Musumeci, Francesco

    2011-03-01

    A long-term mechanical biventricular support by HeartWare HVAS third-generation continuous flow pump (HeartWare, Inc, Miramar, FL, USA) was implanted in a Korean patient with a small chest size for treatment of a refractory end-stage heart failure due to an idiopathic dilative cardiomyopathy. We report our experience with a single patient and the early mid-term follow-up results with such a mechanical ventricular support.

  9. An Approach to Continuous Approximation of Pareto Front Using Geometric Support Vector Regression for Multi-objective Optimization of Fermentation Process

    Institute of Scientific and Technical Information of China (English)

    Jiahuan Wu; Jianlin Wang; Tao Yu; Liqiang Zhao

    2014-01-01

    The approaches to discrete approximation of Pareto front using multi-objective evolutionary algorithms have the problems of heavy computation burden, long running time and missing Pareto optimal points. In order to overcome these problems, an approach to continuous approximation of Pareto front using geometric support vector regression is presented. The regression model of the small size approximate discrete Pareto front is constructed by geometric support vector regression modeling and is described as the approximate continuous Pareto front. In the process of geometric support vector regression modeling, considering the distribution characteristic of Pareto optimal points, the separable augmented training sample sets are constructed by shifting original training sample points along multiple coordinated axes. Besides, an interactive decision-making (DM) procedure, in which the continuous approximation of Pareto front and decision-making is performed interactive-ly, is designed for improving the accuracy of the preferred Pareto optimal point. The correctness of the continuous approximation of Pareto front is demonstrated with a typical multi-objective optimization problem. In addition, combined with the interactive decision-making procedure, the continuous approximation of Pareto front is applied in the multi-objective optimization for an industrial fed-batch yeast fermentation process. The experi-mental results show that the generated approximate continuous Pareto front has good accuracy and complete-ness. Compared with the multi-objective evolutionary algorithm with large size population, a more accurate preferred Pareto optimal point can be obtained from the approximate continuous Pareto front with less compu-tation and shorter running time. The operation strategy corresponding to the final preferred Pareto optimal point generated by the interactive DM procedure can improve the production indexes of the fermentation process effectively.

  10. Demonstration of Decision Support Tools for Sustainable Development - An Application on Alternative Fuels in the Greater Yellowstone-Teton Region

    Energy Technology Data Exchange (ETDEWEB)

    Shropshire, D.E.; Cobb, D.A.; Worhach, P.; Jacobson, J.J.; Berrett, S.

    2000-12-30

    The Demonstration of Decision Support Tools for Sustainable Development project integrated the Bechtel/Nexant Industrial Materials Exchange Planner and the Idaho National Engineering and Environmental Laboratory System Dynamic models, demonstrating their capabilities on alternative fuel applications in the Greater Yellowstone-Teton Park system. The combined model, called the Dynamic Industrial Material Exchange, was used on selected test cases in the Greater Yellow Teton Parks region to evaluate economic, environmental, and social implications of alternative fuel applications, and identifying primary and secondary industries. The test cases included looking at compressed natural gas applications in Teton National Park and Jackson, Wyoming, and studying ethanol use in Yellowstone National Park and gateway cities in Montana. With further development, the system could be used to assist decision-makers (local government, planners, vehicle purchasers, and fuel suppliers) in selecting alternative fuels, vehicles, and developing AF infrastructures. The system could become a regional AF market assessment tool that could help decision-makers understand the behavior of the AF market and conditions in which the market would grow. Based on this high level market assessment, investors and decision-makers would become more knowledgeable of the AF market opportunity before developing detailed plans and preparing financial analysis.

  11. Sustaining Lesson Study: Resources and Factors that Support and Constrain Mathematics Teachers' Ability to Continue After the Grant Ends

    Science.gov (United States)

    Druken, Bridget Kinsella

    Lesson study, a teacher-led vehicle for inquiring into teacher practice through creating, enacting, and reflecting on collaboratively designed research lessons, has been shown to improve mathematics teacher practice in the United States, such as improving knowledge about mathematics, changing teacher practice, and developing communities of teachers. Though it has been described as a sustainable form of professional development, little research exists on what might support teachers in continuing to engage in lesson study after a grant ends. This qualitative and multi-case study investigates the sustainability of lesson study as mathematics teachers engage in a district scale-up lesson study professional experience after participating in a three-year California Mathematics Science Partnership (CaMSP) grant to improve algebraic instruction. To do so, I first provide a description of material (e.g. curricular materials and time), human (attending district trainings and interacting with mathematics coaches), and social (qualities like trust, shared values, common goals, and expectations developed through relationships with others) resources present in the context of two school districts as reported by participants. I then describe practices of lesson study reported to have continued. I also report on teachers' conceptions of what it means to engage in lesson study. I conclude by describing how these results suggest factors that supported and constrained teachers' in continuing lesson study. To accomplish this work, I used qualitative methods of grounded theory informed by a modified sustainability framework on interview, survey, and case study data about teachers, principals, and Teachers on Special Assignment (TOSAs). Four cases were selected to show the varying levels of lesson study practices that continued past the conclusion of the grant. Analyses reveal varying levels of integration, linkage, and synergy among both formally and informally arranged groups of

  12. Development of continuous pharmaceutical production processes supported by process systems engineering methods and tools

    DEFF Research Database (Denmark)

    Gernaey, Krist; Cervera Padrell, Albert Emili; Woodley, John

    2012-01-01

    The pharmaceutical industry is undergoing a radical transition towards continuous production processes. Systematic use of process systems engineering (PSE) methods and tools form the key to achieve this transition in a structured and efficient way....

  13. Validation of Loss and Continuation Rate Models to Support Navy Community Management

    Science.gov (United States)

    2014-02-01

    are a function of the optimization embedded in the software . The proposed models are ‘relatively’ standard; differences in results due to estimation... software used are unlikely, but possible. 8. Following CNA, continuation rates, (CR) for paygrades, (PG), E1-E3 were combined into one category. 9...2011), Forecasting Navy Continuation Rates: An Exploratory Analysis, Center for Naval Analysis, CRM D0023555.A2 Schmitz, E., Kraus, A., Sutton, W

  14. Staff attitudes towards continuation of life-support in newborns with major congenital anomalies

    NARCIS (Netherlands)

    Hazebroek, FWJ; Bos, AP; Ouwens, C; Tibboel, D; Molenaar, JC

    1996-01-01

    This study was conducted to gain insight into the attitudes of medical staff towards life-support of newborns with life-threatening problems, seen against the background of these children's expected morbidity and quality of life. The opinions about the mode of life-support were determined by questio

  15. Continuous CO2 capture in a circulating fluidized bed using supported amine sorbents

    NARCIS (Netherlands)

    Veneman, R.; Li, Z.; Hogendoorn, J.A.; Kersten, S.R.A.; Brilman, D.W.F.

    2012-01-01

    In this work, supported amine sorbents were prepared by physical impregnation of silica and polymethylmethacrylate (PMMA) with tetraethylenepentamine (TEPA) and studied for post-combustion CO2 capture purposes in a lab scale circulating fluidized bed (CFB) reactor. Sorbent amine loading and support

  16. Reassessing the Racial Divide in Support for Capital Punishment: The Continuing Significance of Race

    Science.gov (United States)

    Unnever, James D.; Cullen, Francis T.

    2007-01-01

    This project investigates the racial divide in support for capital punishment. The authors examine whether race has a direct effect on support for capital punishment and test whether the influence of race varies across class, being a native southerner, confidence in government officials, political orientation, and religious affiliation. Using data…

  17. Program Support and Value of Training in Mentors' Satisfaction and Anticipated Continuation of School-Based Mentoring Relationships

    Science.gov (United States)

    McQuillin, Samuel D.; Straight, Gerald G.; Saeki, Elina

    2015-01-01

    In this study, we tested a theoretical model of training practices in school-based mentoring by comparing the differences between two mentoring programs on mentor-reported program support, value of training, relationship satisfaction, and plans to continue mentoring. The two mentoring programs that we compared were conducted at the same school and…

  18. Continuous Reductive Amination of Biomass-Derived Molecules over Carbonized Filter Paper-Supported FeNi Alloy.

    Science.gov (United States)

    Chieffi, Gianpaolo; Braun, Max; Esposito, Davide

    2015-11-01

    This paper reports the continuous reductive amination of different molecules, including biomass-related compounds, over carbon-supported FeNi nanoparticles obtained on the basis of inexpensive and abundant metal precursors and cellulose. A biorefinery case study for the preparation of pyrrolidones via acid-catalyzed hydrolysis of glucose followed by reductive amination of the obtained levulinic acid is described.

  19. Program Support and Value of Training in Mentors' Satisfaction and Anticipated Continuation of School-Based Mentoring Relationships

    Science.gov (United States)

    McQuillin, Samuel D.; Straight, Gerald G.; Saeki, Elina

    2015-01-01

    In this study, we tested a theoretical model of training practices in school-based mentoring by comparing the differences between two mentoring programs on mentor-reported program support, value of training, relationship satisfaction, and plans to continue mentoring. The two mentoring programs that we compared were conducted at the same school and…

  20. Proposing a Continuous Professional Development Model to Support and Enhance Professional Learning of Teachers in Special Schools in South Africa

    Science.gov (United States)

    Kempen, M.; Steyn, G. M.

    2016-01-01

    A collaborative continuous professional (CPD) model was implemented and evaluated in six special schools in Gauteng, South Africa in order to support teachers in their professional capacity. The study which reports on a two year study aimed to establish the value of the CPD programme on teachers' learning, students' outcomes and whole school…

  1. Dynamic value assessments in oncology supported by the PACE Continuous Innovation Indicators.

    Science.gov (United States)

    Paddock, Silvia; Goodman, Clifford; Shortenhaus, Scott; Grainger, David; Zummo, Jacqueline; Thomas, Samuel

    2017-07-26

    Several recently developed frameworks aim to assess the value of cancer treatments, but the most appropriate metrics remain uncertain. We use data from the Patient Access to Cancer care Excellence Continuous Innovation Indicators to examine the relationship between hazard ratios (HRs) from clinical trials and dynamic therapeutic value accumulating over time. Our analysis shows that HRs from initial clinical trials poorly predict the eventual therapeutic value of cancer treatments. Relying strongly on HRs from registration trials to predict the long-term success of treatments leaves a lot of the variance unexplained. The Continuous Innovation Indicators offer a complementing, dynamic method to track the therapeutic value of cancer treatments and continuously update value assessments as additional evidence accumulates.

  2. Child behaviors as a moderator: Examining the relationship between foster parent supports, satisfaction, and intent to continue fostering.

    Science.gov (United States)

    Cooley, Morgan E; Farineau, Heather M; Mullis, Ann K

    2015-07-01

    Foster parents need access to supports and resources in order to be satisfied with their caregiving role and continue providing foster care services. However, they often experience multiple demands in their role as a substitute caregiver that could lead to stress. Child behaviors especially may be a significant factor when considering sources of strain and may be a potential risk factor for negative outcomes such as dissatisfaction or the decision to discontinue providing foster care. The purpose of this study was to examine whether child disruptive behaviors moderated or influenced the nature or strength of the relationship between foster parent supports and satisfaction as a caregiver as well as intent to continue fostering. The sample consisted of 155 licensed foster caregivers from across the United States. Child behaviors served as a significant moderator between some types of supports and satisfaction. Implications for future research, practice, and policy are discussed.

  3. Next Generation Life Support (NGLS): Continuous Electrochemical Gas Separator (CEGS) Element

    Data.gov (United States)

    National Aeronautics and Space Administration — Life support systems on human spacecraft are designed to provide a safe, habitable environment for the astronauts, and one of the most significant challenges is...

  4. Continuous flow room temperature reductive aqueous homo-coupling of aryl halides using supported Pd catalysts

    National Research Council Canada - National Science Library

    Feiz, Afsaneh; Bazgir, Ayoob; Balu, Alina M; Luque, Rafael

    2016-01-01

    .... A simple reductive homo-coupling Ullmann-type reaction was performed in an H-Cube mini using commercially available supported Pd catalysts under mild reaction conditions, with quantitative conversion to target products...

  5. Laboratory grey cast iron continuous casting line with electromagnetic forced convection support

    Directory of Open Access Journals (Sweden)

    J. Szajnar

    2010-07-01

    Full Text Available The article describes the construction of a 20 mm diameter grey cast iron ingots continuous casting laboratory line. This line is made ofthree main units: melting unit (induction furnace, casting unit and the pulling unit. In order to improve the homogeneity of themicrostructure of ingots (by applying forced convection of liquid metal during the crystallization process in this case a crystallizer system generating the forced movement of liquid metal based on a system of electrical power windings of the AC specific frequency. Thissolution allowed to obtain a homogeneous microstructure of the continuous casting of cast iron EN-GJL-200 species.

  6. A Time-Space Diagram as Controller Support Tool for Closed Path Continuous Descent Operations

    NARCIS (Netherlands)

    De Leege, A.M.P.; In 't Veld, A.C.; Mulder, M.; Van Paassen, M.M.

    2011-01-01

    Tactical control during a closed-path Continuous Descent Operation stops the aircraft from following its optimized descent. To mitigate tactical control, air traffic controllers apply arbitrary large spacing buffers to account for the unpredictability of the aircraft trajectory from the controller’s

  7. Space-time continuous models of swarm robotic systems supporting global-to-local programming

    CERN Document Server

    Hamann, Heiko; Nakamura, Yoshihiko

    2010-01-01

    Space-Time Continuous Models of Swarm Robotic Systems presents a control-algorithm-based model that predicts the behavior of large self-organizing robot groups, or robot swarms. Readers will find an extensive look into the interdisciplinary research field of swarm robotics.

  8. Sanitary landfill local-scale flow and transport modeling in support of alternative concentrations limit demonstrations, Savannah River Site

    Energy Technology Data Exchange (ETDEWEB)

    Kelly, V.A.; Beach, J.A.; Statham, W.H.; Pickens, J.F. [INTERA, Inc., Austin, TX (United States)

    1993-02-19

    The Savannah River Site (SRS) is a Department of Energy (DOE) facility located near Aiken, South Carolina which is currently operated and managed by Westinghouse Savannah River Company (WSRC). The Sanitary Landfill (Sanitary Landfill) at the SRS is located approximately 2,000 feet Northwest of Upper Three Runs Creek (UTRC) on an approximately 70 acre site located south of Road C between the SRS B-Area and UTRC. The Sanitary Landfill has been receiving wastes since 1974 and operates as an unlined trench and fill operation. The original landfill site was 32 acres. This area reached its capacity around 1987 and a Northern Expansion of 16 acres and a Southern Expansion of 22 acres were added in 1987. The Northern Expansion has not been used for waste disposal to date and the Southern Expansion is expected to reach capacity in 1992 or 1993. The waste received at the Sanitary Landfill is predominantly paper, plastics, rubber, wood, metal, cardboard, rags saturated with degreasing solvents, pesticide bags, empty cans, and asbestos in bags. The landfill is not supposed to receive any radioactive wastes. However, tritium has been detected in the groundwater at the site. Gross alpha and gross beta are also evaluated at the landfill. The objectives of this modeling study are twofold: (1) to create a local scale Sanitary Landfill flow model to study hydraulic effects resulting from capping the Sanitary Landfill; and (2) to create a Sanitary Landfill local scale transport model to support ACL Demonstrations for a RCRA Part B Permit Renewal.

  9. Hemodynamic stress echocardiography in patients supported with a continuous-flow left ventricular assist device

    DEFF Research Database (Denmark)

    Andersen, Mads; Gustafsson, Finn; Madsen, Per Lav

    2010-01-01

    Functional assessment of continuous-flow left ventricular assist devices (LVADs) is usually performed with the patient at rest. This study compared echocardiographic indices of contraction and filling pressure with invasive measures in 12 ambulatory LVAD patients undergoing symptom-limited bicycl...... parallel with cardiac output) and diastolic E/e' ratio decreased (correlating inversely with diastolic pulmonary artery pressure). These findings emphasize the potential role of exercise echocardiography in studying exercise hemodynamics in LVAD patients....

  10. Laboratory grey cast iron continuous casting line with electromagnetic forced convection support

    OpenAIRE

    2010-01-01

    The article describes the construction of a 20 mm diameter grey cast iron ingots continuous casting laboratory line. This line is made ofthree main units: melting unit (induction furnace), casting unit and the pulling unit. In order to improve the homogeneity of themicrostructure of ingots (by applying forced convection of liquid metal during the crystallization process) in this case a crystallizer system generating the forced movement of liquid metal based on a system of electrical power win...

  11. A global finite-element shallow-water model supporting continuous and discontinuous elements

    Directory of Open Access Journals (Sweden)

    P. A. Ullrich

    2014-08-01

    Full Text Available This paper presents a novel nodal finite element method for either continuous and discontinuous elements, as applied to the 2-D shallow-water equations on the cubed-sphere. The cornerstone of this method is the construction of a robust derivative operator which can be applied to compute discrete derivatives even over a discontinuous function space. A key advantage of the robust derivative is that it can be applied to partial differential equations in either conservative or non-conservative form. However, it is also shown that discontinuous penalization is required to recover the correct order of accuracy for discontinuous elements. Two versions with discontinuous elements are examined, using either the g1 and g2 flux correction function for distribution of boundary fluxes and penalty across nodal points. Scalar and vector hyperviscosity operators valid for both continuous and discontinuous elements are also derived for stabilization and removal of grid-scale noise. This method is validated using three standard shallow-water test cases, including geostrophically balanced flow, a mountain-induced Rossby wave train and a barotropic instability. The results show that although the discontinuous basis requires a smaller time step size than that required for continuous elements, the method exhibits better stability and accuracy properties in the absence of hyperviscosity.

  12. Dynamic metabolism modelling of urban water services--demonstrating effectiveness as a decision-support tool for Oslo, Norway.

    Science.gov (United States)

    Venkatesh, G; Sægrov, Sveinung; Brattebø, Helge

    2014-09-15

    Urban water services are challenged from many perspectives and different stakeholders demand performance improvements along economic, social and environmental dimensions of sustainability. In response, urban water utilities systematically give more attention to criteria such as water safety, climate change adaptation and mitigation, environmental life cycle assessment (LCA), total cost efficiency, and on how to improve their operations within the water-energy-carbon nexus. The authors of this paper collaborated in the development of a 'Dynamic Metabolism Model' (DMM). The model is developed for generic use in the sustainability assessment of urban water services, and it has been initially tested for the city of Oslo, Norway. The purpose has been to adopt a holistic systemic perspective to the analysis of metabolism and environmental impacts of resource flows in urban water and wastewater systems, in order to offer a tool for the examination of future strategies and intervention options in such systems. This paper describes the model and its application to the city of Oslo for the analysis time period 2013-2040. The external factors impacting decision-making and interventions are introduced along with realistic scenarios developed for the testing, after consultation with officials at the Oslo Water and Wastewater Works (Norway). Possible interventions that the utility intends to set in motion are defined and numerically interpreted for incorporation into the model, and changes in the indicator values over the time period are determined. This paper aims to demonstrate the effectiveness and usefulness of the DMM, as a decision-support tool for water-wastewater utilities. The scenarios considered and interventions identified do not include all possible scenarios and interventions that can be relevant for water-wastewater utilities. Copyright © 2014 Elsevier Ltd. All rights reserved.

  13. Continuous fixed-bed gas-phase hydroformylation using supported ionic liquid-phase (SILP) Rh catalysts

    DEFF Research Database (Denmark)

    Riisager, Anders; Wasserscheid, Peter; Van Hal, R.

    2003-01-01

    Continuous flow gas-phase hydroformylation of propene was performed using novel supported ionic liquid-phase (SILP) catalysts containing immobilized Rh complexes of the biphosphine ligand sulfoxantphos in the ionic liquids 1-n-butyl-3-methylimidazolium hexafluorophosphate and halogen-free 1-n......-butyl-3-methylimidazolium n-octylsulfate on silica support. The Rh-sulfoxantphos SILP catalysts proved to be more regioselective than catalysts without ligand and the analogous ionic liquid-free catalysts, giving up to 96% linear product. Furthermore, the performance of the catalysts was generally...

  14. Assessment of vocational opportunities and continuing job placement for persons with mental disabilities: factors indicating levels of necessary support.

    Science.gov (United States)

    Suzuki, Yoshiko; Kikuchi, Emiko; Watanabe, Shu

    2008-01-01

    We determined primary factors in allocating support for vocational opportunities and continuing job placement for clients with mental disabilities. The study analyzed 29 items regarding work attitudes and vocational skills for 70 clients as assessed by the Tokyo Metropolitan Rehabilitation Center for the Physically and Mentally Disabled. The evaluations were performed using the situational assessment approach with a 3-point support scale system assigned through observation of behavior. The results of these evaluations placed 35 clients in employment groups (A and B) and 35 clients in a sheltered workshop group (C). The data was analyzed by multivariate analysis. Predictions of success and functional differences among the groups were indicated by the data. Differences were found among the three groups in work attitudes and skills such as "self-direction" and "directions for social participation". Out of the 35 clients currently employed, 11 were recognized as needing ongoing assistance from supported employment offices. For the supported employment group (B), the major work attitudes and skills for which they required continuous services for maintaining stable jobs were 'emotional stability' and 'learning of working skills and accomplishment of work.' In a previous study, the major differences between the competitive employment group (A) and the sheltered workshop group (C) were in areas of 'responsibilities,' 'goals for life,' 'motivation for the work and understanding of contents for work,' and 'safety during work.' Our study supports these findings. In addition, transition from the sheltered workshop to supported employment required training to improve skills and support for 'responsibilities,' 'goals for life,' 'participation in leisure activities and community-based activities,' and 'preparation and cleaning for work.'

  15. Continuous Water Quality Monitoring in the Sacramento-San Joaquin Delta to support Ecosystem Science

    Science.gov (United States)

    Downing, B. D.; Bergamaschi, B. A.; Pellerin, B. A.; Saraceno, J.; Sauer, M.; Kraus, T. E.; Burau, J. R.; Fujii, R.

    2013-12-01

    Characterizing habitat quality and nutrient availability to food webs is an essential step for understanding and predicting the success of pelagic organisms in the Sacramento-San Joaquin Delta (Delta). The difficulty is that water quality and nutrient supply changes continuously as tidal and wind-driven currents move new water parcels to and from comparatively static geomorphic settings. Understanding interactions between nutrient cycling, suspended sediment, and plankton dynamics with flow and tidal range relative to position in the estuary is critical to predicting and managing bottom up effects on aquatic habitat in the Delta. Historically, quantifying concentrations and loads in the Delta has relied on water quality data collected at monthly intervals. Current in situ optical sensors for nutrients, dissolved organic matter (DOM) and algal pigments (chlorophyll-A, phycocyanin) allow for real-time, high-frequency measurements on time scales of seconds, and extending up to years. Such data is essential for characterizing changes in water quality over short and long term temporal scales as well as over broader spatial scales. High frequency water quality data have been collected at key stations in the Delta since 2012. Sensors that continuously measure nitrate, DOM, algal pigments and turbidity have been co-located at pre-existing Delta flow monitoring stations. Data from the stations are telemetered to USGS data servers and are designed to run autonomously with a monthly service interval, where sensors are cleaned and checked against calibration standards. The autonomous system is verified against discrete samples taken monthly and intensively over periodic ebb to flood tidal cycles. Here we present examples of how coupled optical and acoustic data from the sensor network to improve our understanding of nutrient and DOM dynamics and fluxes. The data offer robust quantitative estimates of concentrations and constituent fluxes needed to investigate biogeochemical

  16. Continued Development of Compact Multi-gas Monitor for Life Support Systems Control in Space

    Science.gov (United States)

    Delgado-Alonso, Jesús; Phillips, Straun; Chullen, Cinda; Quinn, Gregory

    2016-01-01

    Miniature optic gas sensors (MOGS) based on luminescent materials have shown great potential as alternatives to Near-Infrared-based gas sensor systems for the advanced space suit portable life support system (PLSS). The unique capability of MOGS for carbon dioxide and oxygen monitoring under wet conditions has been reported, as has the fast recovery of MOGS humidity sensors after long periods of being wet. Lower volume and power requirements are also potential advantages of MOGS over both traditional and advanced Non-Dispersive Infrared (NDIR) gas sensors, which have shown so far longer life than luminescent sensors. This paper presents the most recent results in the development and analytical validation of a compact multi-gas sensor unit based on luminescent sensors for the PLSS. Results of extensive testing are presented, including studies conducted at Intelligent Optical Systems laboratories, a United Technology Corporation Aerospace Systems (UTAS) laboratory, and a Johnson Space Center laboratory. The potential of this sensor technology for gas monitoring in PLSSs and other life support systems and the advantages and limitations found through detailed sensor validation are discussed.

  17. Alternative technique for implantation of biventricular support with HeartWare implantable continuous flow pump.

    Science.gov (United States)

    Krabatsch, Thomas; Stepanenko, Alexander; Schweiger, Martin; Kukucka, Marian; Ewert, Peter; Hetzer, Roland; Potapov, Evgenij

    2011-01-01

    In this case report, we describe a modification of the biventricular implantation of the HeartWare HVAD. A 28-year-old man with dilative cardiomyopathy presented with biventricular decompensation. The patient underwent implantation of two HeartWare HVADs for biventricular support. Because of low flow of the right pump (2 L/min), a right ventricular angiogram and repeated transesophageal echocardiography (TEE) were done and showed that the pump was compressing the right ventricle. Operative revision was performed, resulting in removal of the right pump and placement into the right atrium, so that it was located in the right pleural cavity. The HVAD fixation ring on the free wall of the right ventricle was left in place, and the opening was closed with an individually designed titanium plug. The findings of this case are that implantation of the HeartWare HVAD for right ventricular (RV) support may be safely performed in atrial position, with individually designed plugs allowing safe and quick removal of the HeartWare pump. This might be used as a "bail-out" strategy when necessary.

  18. Using a "small wind" demonstration project to support public extension and education in renewable energy and STEM disciplines

    Science.gov (United States)

    O'brien-gayes, P. T.

    2012-12-01

    The City of North Myrtle Beach SC has erected three small-scale wind turbines for educational purposes. These turbines are tied directly into the local power grid. This allows for a unique study opportunity through which to teach renewable energy strategies. The study focuses on inter-site variability spread out over four miles of beach. Each location is subject to different wind fields responding to local structures. The study focuses on inter-site variability to cross reference energy production with the wind and weather conditions. Public and K-12 outreach is a primary objective of the program. Using demonstration turbines and by analyzing the wind, weather and site conditions outreach efforts are focused on highlighting renewable energy concepts. This also allows focus on STEM disciplines and critical thinking in analyzing data to compare the sites and different turbine production. Engaging in the STEM disciplines the projects crosses over science, technology, engineering, and mathematical boundaries creating an interdisciplinary scientific experience for students. In addition, this allows for introduction of techniques and developing technologies. It also allows students to consider challenges and possible solutions to issues of increased power production and cost efficiency. Through connecting the touchstone of experiential learning; a hands-on experience actively engages students in experimental application and problem solving. By looking locally at renewable energy in Horry County South Carolina students are engaged in seeing how projects impact science and economic development in the region. The Congressional Research Service (CRS) Report for Congress reports a considerable need expand and enhance the o preparation of students, teachers and practitioners in the areas of science, technology, engineering and mathematics. "When compared to other nations, the math and science achievement of U.S. pupils and the rates of STEM degree attainment appear

  19. Post-Combustion CO2 Capture Demonstration Using Supported Amine Sorbents: Design and Evaluation of 200 kWth Pilot

    NARCIS (Netherlands)

    Zhao, Wenying; Veneman, Rens; Chen, Denggao; Li, Zhenshan; Cai, Ningsheng; Brilmana, Derk W.F.

    2014-01-01

    CO2 capture using supported amine sorbents is a promising post-combustion capture technology. With regard to supported amine sorbents, the most important issues exist in the regeneration process. In this paper, various regeneration strategies including thermal regeneration in pure CO2 stream, vacuum

  20. Type D personality, illness perception, social support and quality of life in continuous ambulatory peritoneal dialysis patients.

    Science.gov (United States)

    Li, Jianying; Wu, Xiaofeng; Lin, Jianxiong; Zou, Dongmei; Yang, Xiao; Cheng, Shouzhen; Guo, Qunying

    2017-02-01

    The previous studies reported Type D was associated with poor quality of life (QoL), increased psychological distress, and impaired health status in cardiac patients. The aim of this study is to assess the relationships among Type D personality, illness perception, social support, and investigate the impact of Type D personality on QoL in continuous ambulatory peritoneal dialysis (CAPD) patients. Type D personality was assessed by the Chinese 14-item Type D Personality Scale (DS14). Illness perceptions were assessed using the Chinese version of the Brief Illness Perception Questionnaire (B-IPQ). Social support status was assessed by the well-validated social support rating scale (SSRS). Patients' QoL was assessed by using Medical Outcomes Short Form 36 (SF-36), respectively. The Type Ds had significantly lower objective support score (8.18 ± 2.56 vs. 9.67 ± 3.28, p = 0.0001), subjective support score (6.71 ± 2.0 vs. 7.62 ± 1.93, p = 0.0001) and utilization of social support score (6.76 ± 2.0 vs. 7.61 ± 1.94, p = 0.0001) than that of the non-type Ds. Type Ds believed their illness had much more serious consequences (7.67 ± 2.64 vs. 6.27 ± 3.45, p social support (r = -0.24, p perceptions, social support and QoL in CAPD patients. The worse illness perceptions and lower social support level therefore represent possible mechanisms to explain the link between Type D and poor QoL in CAPD patients.

  1. Continuation of research into software for space operations support, volume 1

    Science.gov (United States)

    Collier, Mark D.; Killough, Ronnie; Martin, Nancy L.

    1990-01-01

    A prototype workstation executive called the Hardware Independent Software Development Environment (HISDE) was developed. Software technologies relevant to workstation executives were researched and evaluated and HISDE was used as a test bed for prototyping efforts. New X Windows software concepts and technology were introduced into workstation executives and related applications. The four research efforts performed included: (1) Research into the usability and efficiency of Motif (an X Windows based graphic user interface) which consisted of converting the existing Athena widget based HISDE user interface to Motif demonstrating the usability of Motif and providing insight into the level of effort required to translate an application from widget to another; (2) Prototype a real time data display widget which consisted of research methods for and prototyping the selected method of displaying textual values in an efficient manner; (3) X Windows performance evaluation which consisted of a series of performance measurements which demonstrated the ability of low level X Windows to display textural information; (4) Convert the Display Manager to X Window/Motif which is the application used by NASA for data display during operational mode.

  2. Disrupting intergenerational continuity in harsh parenting: Self-control and a supportive partner.

    Science.gov (United States)

    Schofield, Thomas J; Conger, Rand D; Conger, Kathi J

    2016-12-22

    Harsh, abusive, and rejecting behavior by parents toward their children is associated with increased risk for many developmental problems for youth. Children raised by harsh parents are also more likely to treat their own children harshly. The present study addresses conditions that would break this intergenerational cycle of harsh parenting. Data come from a three-generation study of a cohort of 290 adolescents (Generation 2 [G2], 52% female) grown to adulthood and their parents (Generation 1 [G1]). During adolescence, observers rated G1 harsh parenting to G2. Several years later observers rated G2 harsh parenting toward their oldest child (Generation 3 [G3]). Several adaptive systems fundamental to human resilience attenuate intergenerational continuity in harshness. G2 parents were relatively less harsh to G3 children (notwithstanding a history of harshness from G1) when G2's romantic partner (a) communicated positively with G2 and (b) had a good relationship with G3, and (c) when G2 was high on self-control. Interventions that target all of these protective factors may not only break but also reverse the intergenerational cycle of child maltreatment.

  3. Strategies to support engagement and continuity of activity during mealtimes for families living with dementia; a qualitative study.

    Science.gov (United States)

    Keller, Heather H; Martin, Lori Schindel; Dupuis, Sherry; Reimer, Holly; Genoe, Rebecca

    2015-10-09

    Mealtimes are an essential part of living and quality of life for everyone, including persons living with dementia. A longitudinal qualitative study provided understanding of the meaning of mealtimes for persons with dementia and their family care partners. Strategies were specifically described by families to support meaningful mealtimes. The purpose of this manuscript is to describe the strategies devised and used by these families living with dementia. A longitudinal qualitative study was undertaken to explore the meaning and experience of mealtimes for families living with dementia over a three-year period. 27 families [older person with dementia and at least one family care partner] were originally recruited from the community of South-Western Ontario. Individual and dyad interviews were conducted each year. Digitally recorded transcripts were analyzed using grounded theory methodology. Strategies were identified and categorized. Strategies to support quality mealtimes were devised by families as they adapted to their evolving lives. General strategies such as living in the moment, as well as strategies specific to maintaining social engagement and continuity of mealtime activities were reported. In addition to nutritional benefit, family mealtimes provide important opportunities for persons with dementia and their family care partners to socially engage and continue meaningful roles. Strategies identified by participants provide a basis for further education and support to families living with dementia.

  4. Continuing medical and dental education on the global stage: the nexus of supporting international Christian healthcare workers and developing educators

    Directory of Open Access Journals (Sweden)

    Lyubov D Slashcheva

    2016-01-01

    Full Text Available One of the challenges facing international healthcare missionaries is that of maintaining up-to-date knowledge and staying current with professional certification. Since 1978, annual programs by the Christian Medical and Dental Associations have offered professional continuing education to thousands of US healthcare professionals serving as missionaries in the regions of Africa, Asia, and, in more recent years, globally. In addition, conference programming is designed to prepare, train, and support healthcare missionaries to, in turn, serve as educators in their places of ministry. The program is designed for both professional education and personal encouragement. Utilizing historical documents from program facilitation and interviews from those involved with its implementation, this paper describes the history, vision, and favorable quantitative growth and qualitative impact on participants. The program continues to grow as healthcare missionaries are educated near their places of service, while reinforcing their own roles as educators.

  5. ERMHAN: A Context-Aware Service Platform to Support Continuous Care Networks for Home-Based Assistance.

    Science.gov (United States)

    Paganelli, Federica; Spinicci, Emilio; Giuli, Dino

    2008-01-01

    Continuous care models for chronic diseases pose several technology-oriented challenges for home-based continuous care, where assistance services rely on a close collaboration among different stakeholders such as health operators, patient relatives, and social community members. Here we describe Emilia Romagna Mobile Health Assistance Network (ERMHAN) a multichannel context-aware service platform designed to support care networks in cooperating and sharing information with the goal of improving patient quality of life. In order to meet extensibility and flexibility requirements, this platform has been developed through ontology-based context-aware computing and a service oriented approach. We also provide some preliminary results of performance analysis and user survey activity.

  6. ERMHAN: A Context-Aware Service Platform to Support Continuous Care Networks for Home-Based Assistance

    Directory of Open Access Journals (Sweden)

    Federica Paganelli

    2008-01-01

    Full Text Available Continuous care models for chronic diseases pose several technology-oriented challenges for home-based continuous care, where assistance services rely on a close collaboration among different stakeholders such as health operators, patient relatives, and social community members. Here we describe Emilia Romagna Mobile Health Assistance Network (ERMHAN a multichannel context-aware service platform designed to support care networks in cooperating and sharing information with the goal of improving patient quality of life. In order to meet extensibility and flexibility requirements, this platform has been developed through ontology-based context-aware computing and a service oriented approach. We also provide some preliminary results of performance analysis and user survey activity.

  7. Use of 13C Labeled Carbon Tetrachloride to Demonstrate the Transformation to Carbon Dioxide under Anaerobic Conditions in a Continuous Flow Column

    Science.gov (United States)

    Semprini, L.; Azizian, M.

    2012-12-01

    The demonstration of transformation of chlorinated aliphatic compounds (CAHs) in the subsurface is a challenge, especially when the products are carbon dioxide (CO2) and chloride ion. The groundwater contaminant carbon tetrachloride (CT) is of particular interest since a broad range of transformation products can be potentially formed under anaerobic conditions. The ability to demonstrate the transformation of CT to CO2 as a non toxic endproduct, is also of great interest. Results will be presented from a continuous flow column study where 13C labeled CT was used to demonstrate its transformation to CO2. The column was packed with a quartz sand and bioaugmented the Evanite Culture (EV) that is capable of transforming tetrachloroethene (PCE) to ethene. The column was continously fed a synthetic groundwater that was amended with PCE (0.10 mM) and either formate (1.5 mM) or lactate (1.1 mM), which ferments to produce hydrogen (H2) as the ultimate electron donor. Earlier CT transformation studies with the column, in the absence of sulfate reduction, and with formate added as a donor found CT (0.015 mM) was over 98% transformed with about 20% converted to chloroform (CF) (0.003 mM) and with a transient detection of chloromethane (CM). Methane and carbon disulfide, as potential products, were not detected. Neither CT nor CF inhibited the reductive dehalogenation of PCE to ethene. A series of transient studies conducted after these initial CT transformation tests, but in the absence of CT, showed formate remained an effective substrate for maintaining sulfate reduction and PCE transformation. Lactate, which was effectively fermented prior to CT addition, was not effectively fermented, with propionate accumulating as a fermentation product. When lactate was added, PCE was mainly transformed to cis-dichloroethene (cis-DCE) and VC, and sulfate reduction did not occur. In order to restore effective lactate fermentation the column was then bioaugmented with an EV culture that

  8. A polystyrene-supported 9-amino(9-deoxy)epi quinine derivative for continuous flow asymmetric Michael reactions.

    Science.gov (United States)

    Izquierdo, Javier; Ayats, Carles; Henseler, Andrea H; Pericàs, Miquel A

    2015-04-14

    A polystyrene (PS)-supported 9-amino(9-deoxy)epi quinine derivative catalyzes Michael reactions affording excellent levels of conversion and enantioselectivity using different nucleophiles and structurally diverse enones. The highly recyclable, immobilized catalyst has been used to implement a single-pass, continuous flow process (residence time: 40 min) that can be operated for 21 hours without significant decrease in conversion and with improved enantioselectivity with respect to batch operation. The flow process has also been used for the sequential preparation of a small library of enantioenriched Michael adducts.

  9. Solar Europe industry initiative: research technology development and demonstration in support of 2020 and long-term targets

    NARCIS (Netherlands)

    Sinke, W.C.; Fraile Montoro, D.; Despotou, E.; Nowak, S.; Perezagua, E.

    2010-01-01

    The European Union has set an ambitious target for the implementation of renewable energy technologies by 2020, i.e. a share of 20% of the total energy consumption. In support of these targets the Strategic Energy Technology (SET) Plan has been initiated by the European Commission. One of the key co

  10. Solar Europe industry initiative: research technology development and demonstration in support of 2020 and long-term targets

    NARCIS (Netherlands)

    Sinke, W.C.; Fraile Montoro, D.; Despotou, E.; Nowak, S.; Perezagua, E.

    2010-01-01

    The European Union has set an ambitious target for the implementation of renewable energy technologies by 2020, i.e. a share of 20% of the total energy consumption. In support of these targets the Strategic Energy Technology (SET) Plan has been initiated by the European Commission. One of the key co

  11. Continuous preparation of carbon-nanotube-supported platinum catalysts in a flow reactor directly heated by electric current

    Directory of Open Access Journals (Sweden)

    Alicja Schlange

    2011-10-01

    Full Text Available In this contribution we present for the first time a continuous process for the production of highly active Pt catalysts supported by carbon nanotubes by use of an electrically heated tubular reactor. The synthesized catalysts show a high degree of dispersion and narrow distributions of cluster sizes. In comparison to catalysts synthesized by the conventional oil-bath method a significantly higher electrocatalytic activity was reached, which can be attributed to the higher metal loading and smaller and more uniformly distributed Pt particles on the carbon support. Our approach introduces a simple, time-saving and cost-efficient method for fuel cell catalyst preparation in a flow reactor which could be used at a large scale.

  12. Commercial support of continuing medical education in the United States: the politics of doubt, the value of studies.

    Science.gov (United States)

    Mazmanian, Paul E

    2009-01-01

    The continuing medical education (CME) system of the United States is being questioned for its integrity. Leaders in medicine and in government are asking about the effectiveness of CME, the influence of commercial support, and the value of CME credit and accreditation in assuring CME courses offer valid content, free of commercial bias. Nationally accredited CME organizations received $1.2B in commercial support during 2007, much of it associated with CME in formats shown to be less effective for improving clinical behavior and patient outcomes. There are few reliable data to respond to careful criticism. In 2007, U.S. expenditures for health exceed $2.2 trillion, with physicians responsible for clinical decisions that account for a large part of the spending. Approximately $4013 was spent per physician on CME. Rigorous studies are required to describe and explain relationships of CME accreditation and credit to better education and improved patient outcomes.

  13. The Continuously Operating Caribbean Observational Network (COCONet): Supporting Regional Development of Geoscience Research Across the Circum-Caribbean

    Science.gov (United States)

    Braun, J.; Miller, M. M.; Mattioli, G. S.; Wang, G.; Feaux, K.; Rowan, L.; La Femina, P. C.

    2014-12-01

    The Continuously Operating Caribbean Observational Network (COCONet) is a National Science Foundation (NSF) funded infrastructure project that stretches across the circum-Caribbean to include Central America and the northern portions of South America. Its objective is to develop a large-scale network of geodetic and atmospheric infrastructure to support a broad range of geoscience and atmospheric investigations and enable research on process-oriented science with direct relevance to geo-hazards. The network includes over 60 new and refurbished continuously operating Global Positioning System (GPS) and surface meterology stations. It will also include data from at least 60 existing stations that are being operated by one of our more than 40 regional partners. As COCONet approaches the completion of its build-out phase, it is appropriate to evaluate the activities associated with the project that facilitate capacity building. These activities include three workshops to solicit feedback from regional partners regarding science objectives, station location, and long-term network operation. COCONet graduate research fellowships have been used to support nine students, with seven from countries within the COCONet footprint. The establishment of three regional data and archive centers to foster access to data and promote free and open data standards. Lastly, two Pan American Advanced Studies Institute (PASI) workshops on topics that are central to the main goals of COCONet were also organized to engage early career scientists who are interested in working on topics that are directly relevant to the region. Perhaps the most significant effort on expanding capacity in the region is the recent deployment of a station in Camaguey, Cuba with full support from both the U.S. and Cuban governments. This presentation summarizes the activities of the COCONet project to enhance and support both the human resource development and technical capabilities within the region.

  14. Preliminary test results from a free-piston Stirling engine technology demonstration program to support advanced radioisotope space power applications

    Science.gov (United States)

    White, Maurice A.; Qiu, Songgang; Augenblick, Jack E.

    2000-01-01

    Free-piston Stirling engines offer a relatively mature, proven, long-life technology that is well-suited for advanced, high-efficiency radioisotope space power systems. Contracts from DOE and NASA are being conducted by Stirling Technology Company (STC) for the purpose of demonstrating the Stirling technology in a configuration and power level that is representative of an eventual space power system. The long-term objective is to develop a power system with an efficiency exceeding 20% that can function with a high degree of reliability for up to 15 years on deep space missions. The current technology demonstration convertors (TDC's) are completing shakedown testing and have recently demonstrated performance levels that are virtually identical to projections made during the preliminary design phase. This paper describes preliminary test results for power output, efficiency, and vibration levels. These early results demonstrate the ability of the free-piston Stirling technology to exceed objectives by approximately quadrupling the efficiency of conventional radioisotope thermoelectric generators (RTG's). .

  15. Unlocking the potential of supported liquid phase catalysts with supercritical fluids: low temperature continuous flow catalysis with integrated product separation.

    Science.gov (United States)

    Franciò, Giancarlo; Hintermair, Ulrich; Leitner, Walter

    2015-12-28

    Solution-phase catalysis using molecular transition metal complexes is an extremely powerful tool for chemical synthesis and a key technology for sustainable manufacturing. However, as the reaction complexity and thermal sensitivity of the catalytic system increase, engineering challenges associated with product separation and catalyst recovery can override the value of the product. This persistent downstream issue often renders industrial exploitation of homogeneous catalysis uneconomical despite impressive batch performance of the catalyst. In this regard, continuous-flow systems that allow steady-state homogeneous turnover in a stationary liquid phase while at the same time effecting integrated product separation at mild process temperatures represent a particularly attractive scenario. While continuous-flow processing is a standard procedure for large volume manufacturing, capitalizing on its potential in the realm of the molecular complexity of organic synthesis is still an emerging area that requires innovative solutions. Here we highlight some recent developments which have succeeded in realizing such systems by the combination of near- and supercritical fluids with homogeneous catalysts in supported liquid phases. The cases discussed exemplify how all three levels of continuous-flow homogeneous catalysis (catalyst system, separation strategy, process scheme) must be matched to locate viable process conditions.

  16. InterTechnology Corporation cost/benefit analysis report and supporting opinion survey commerical buildings National Solar Demonstration program

    Energy Technology Data Exchange (ETDEWEB)

    None

    1976-01-19

    Under the Solar Heating and Cooling Demonstration program, solar heated and cooled commercial buildings are to be constructed throughout the nation to show the technical and economic feasibility of solar energy systems and, most importantly, to establish an economically viable solar industry. The questions arise: How many solar energy systems must be installed and where should they be installed to meet these objectives. This report presents an answer to these questions.

  17. Survey of Branch Support Methods Demonstrates Accuracy, Power, and Robustness of Fast Likelihood-based Approximation Schemes

    Science.gov (United States)

    Anisimova, Maria; Gil, Manuel; Dufayard, Jean-François; Dessimoz, Christophe; Gascuel, Olivier

    2011-01-01

    Phylogenetic inference and evaluating support for inferred relationships is at the core of many studies testing evolutionary hypotheses. Despite the popularity of nonparametric bootstrap frequencies and Bayesian posterior probabilities, the interpretation of these measures of tree branch support remains a source of discussion. Furthermore, both methods are computationally expensive and become prohibitive for large data sets. Recent fast approximate likelihood-based measures of branch supports (approximate likelihood ratio test [aLRT] and Shimodaira–Hasegawa [SH]-aLRT) provide a compelling alternative to these slower conventional methods, offering not only speed advantages but also excellent levels of accuracy and power. Here we propose an additional method: a Bayesian-like transformation of aLRT (aBayes). Considering both probabilistic and frequentist frameworks, we compare the performance of the three fast likelihood-based methods with the standard bootstrap (SBS), the Bayesian approach, and the recently introduced rapid bootstrap. Our simulations and real data analyses show that with moderate model violations, all tests are sufficiently accurate, but aLRT and aBayes offer the highest statistical power and are very fast. With severe model violations aLRT, aBayes and Bayesian posteriors can produce elevated false-positive rates. With data sets for which such violation can be detected, we recommend using SH-aLRT, the nonparametric version of aLRT based on a procedure similar to the Shimodaira–Hasegawa tree selection. In general, the SBS seems to be excessively conservative and is much slower than our approximate likelihood-based methods. PMID:21540409

  18. Continuous Decision Support

    Science.gov (United States)

    2015-12-24

    overcoming the sense of “researcher animosity ” associated with the perception that the project is being “graded.” It is indicative however of again...difference between two alternatives whose Vmin scores exceed α if one consumes a substantial portion of available resources while the other’s resource...likely to select an alternative which scores well but consumes a large portion of the available resources, preferring instead those that offer a greater

  19. Field-trial demonstration of an extended-reach GPON-supporting 60-GHz indoor wireless access

    Science.gov (United States)

    Giannoulis, G.; Moraitis, N.; Argyris, N.; Dris, S.; Lessi, C.; Perdikouris, S.; Kostikidou, L.; Apostolopoulos, D.; Spatharakis, C.; Papafili, I.; Agapiou, G.; Panagopoulos, A. D.; Avramopoulos, H.

    2017-02-01

    The 5G era is nearly upon us, and poses several challenges for system designers; one important question is how the (soon to be standardized) mmWave bands of wireless mobile access can coexist harmoniously with optical links in fixed telecom networks. To this end, we present a Radio-over-Fiber (RoF) backhauling concept, interfaced to a 60-GHz indoor femto-cell via a field-installed optical fiber link. We successfully demonstrate generation of a RoF signal up to 1 Gb/s and transmit it optically over 43 km of deployed Single Mode Fiber (SMF), as well as investigate the performance of the 60-GHz access link as a function of distance. The optical link introduces negligible degradation, contrasting the effect of multipath fading in the 60-GHz wireless channel; the latter requires adaptive equalization using offline DSP. The proposed scheme is further validated by demonstration of a 60-GHz Remote Antenna Unit (RAU) concept, handling real traffic from commercial Gigabit Passive Optical Network (GPON) equipment. Proper RAU operation at 1.25 Gb/s is achieved, accommodating true data packets from a Media Converter emitting at 1310 nm through an in-building fiber link. System performance is confirmed through Bit Error Rate (BER) and Error Vector Magnitude (EVM) measurements. EVMs of 11 and 19% are achieved with BPSK signals, for distances of 1 and 2 m respectively. As standardization of mmWave technologies moves from 5G testbeds to field-trial prototypes, successful demonstration of such 60-GHz wireless access scenarios over a telecom operator's commercial fiber infrastructure is even more relevant.

  20. ICT Demonstration

    DEFF Research Database (Denmark)

    Jensen, Tine Wirenfeldt; Bay, Gina

    In this demonstration we present and discuss two interrelated on-line learning resources aimed at supporting international students at Danish universities in building study skills (the Study Metro) and avoiding plagiarism (Stopplagiarism). We emphasize the necessity of designing online learning r...

  1. Remission of chronic anthracycline-induced heart failure with support from a continuous-flow left ventricular assist device.

    Science.gov (United States)

    Khan, Nadeem; Husain, Syed Arman; Husain, Syed Iman; Khalaf, Natalia; George, Joggy; Raissi, Farshad; Segura, Ana Maria; Kar, Biswajit; Bogaev, Roberta C; Frazier, O H

    2012-01-01

    We report the case of a patient who had chronic anthracycline-induced cardiomyopathy that was reversed after treatment with a left ventricular assist device. A 29-year-old woman had undergone anthracycline-based chemotherapy as a teenager in 1991 and 1992 and received a diagnosis of dilated cardiomyopathy 10 years later. Optimal medical therapy had initially controlled the symptoms of heart failure. However, in June 2006, the symptoms worsened to New York Heart Association functional class IV status. We implanted a continuous-flow left ventricular assist device as a bridge to cardiac transplantation; of note, a left ventricular core biopsy at that time showed no replacement fibrosis. The patient's clinical status improved thereafter, enabling left ventricular assist device ex-plantation after 17 months. To our knowledge, this is the first report of the use of left ventricular assist device support to reverse chronic anthracycline-induced heart failure.

  2. Supporting business continuity during a highly pathogenic avian influenza outbreak: a collaboration of industry, academia, and government.

    Science.gov (United States)

    Hennessey, Morgan; Lee, Brendan; Goldsmith, Timothy; Halvorson, Dave; Hueston, William; McElroy, Kristina; Waters, Katherine

    2010-03-01

    Since 2006, a collaborative group of egg industry, state, federal, and academia representatives have worked to enhance preparedness in highly pathogenic avian influenza (HPAI) planning. The collaborative group has created a draft egg product movement protocol, which calls for realistic, science-based contingency plans, biosecurity assessments, commodity risk assessments, and real-time reverse transcriptase-PCR testing to support the continuity of egg operations while also preventing and eradicating an HPAI outbreak. The work done by this group serves as an example of how industry, government, and academia can work together to achieve better preparedness in the event of an animal health emergency. In addition, in the event of an HPAI outbreak in domestic poultry, U.S. consumers will be assured that their egg products come from healthy chickens.

  3. A Java-based enterprise system architecture for implementing a continuously supported and entirely Web-based exercise solution.

    Science.gov (United States)

    Wang, Zhihui; Kiryu, Tohru

    2006-04-01

    Since machine-based exercise still uses local facilities, it is affected by time and place. We designed a web-based system architecture based on the Java 2 Enterprise Edition that can accomplish continuously supported machine-based exercise. In this system, exercise programs and machines are loosely coupled and dynamically integrated on the site of exercise via the Internet. We then extended the conventional health promotion model, which contains three types of players (users, exercise trainers, and manufacturers), by adding a new player: exercise program creators. Moreover, we developed a self-describing strategy to accommodate a variety of exercise programs and provide ease of use to users on the web. We illustrate our novel design with examples taken from our feasibility study on a web-based cycle ergometer exercise system. A biosignal-based workload control approach was introduced to ensure that users performed appropriate exercise alone.

  4. Differentiation and Distribution of Marrow Stem Cells in Flex-Flow Environments Demonstrate Support of the Valvular Phenotype.

    Directory of Open Access Journals (Sweden)

    Sasmita Rath

    Full Text Available For treatment of critical heart valve diseases, prosthetic valves perform fairly well in most adults; however, for pediatric patients, there is the added requirement that the replacement valve grows with the child, thus extremely limiting current treatment options. Tissue engineered heart valves (TEHV, such as those derived from autologous bone marrow stem cells (BMSCs, have the potential to recapitulate native valve architecture and accommodate somatic growth. However, a fundamental pre-cursor in promoting directed integration with native tissues rather than random, uncontrolled growth requires an understanding of BMSC mechanobiological responses to valve-relevant mechanical environments. Here, we report on the responses of human BMSC-seeded polymer constructs to the valve-relevant stress states of: (i steady flow alone, (ii cyclic flexure alone, and (iii the combination of cyclic flexure and steady flow (flex-flow. BMSCs were seeded onto a PGA: PLLA polymer scaffold and cultured in static culture for 8 days. Subsequently, the aforementioned mechanical conditions, (groups consisting of steady flow alone-850ml/min, cyclic flexure alone-1 Hz, and flex-flow-850ml/min and 1 Hz were applied for an additional two weeks. We found samples from the flex-flow group exhibited a valve-like distribution of cells that expressed endothelial (preference to the surfaces and myofibroblast (preference to the intermediate region phenotypes. We interpret that this was likely due to the presence of both appreciable fluid-induced shear stress magnitudes and oscillatory shear stresses, which were concomitantly imparted onto the samples. These results indicate that flex-flow mechanical environments support directed in vitro differentiation of BMSCs uniquely towards a heart valve phenotype, as evident by cellular distribution and expression of specific gene markers. A priori guidance of BMSC-derived, engineered tissue growth under flex-flow conditions may serve to

  5. Operational Decision Support for Material Management in Continuous Mining Systems: From Simulation Concept to Practical Full-Scale Implementations

    Directory of Open Access Journals (Sweden)

    Masoud Soleymani Shishvan

    2017-07-01

    Full Text Available Material management in opencast mines is concerned with planning, organizing, and control of the flow of materials from their extraction points to destinations. It can be strongly affected by operational decisions that have to be made during the production process. To date, little research has focused on the application of simulation modeling as a powerful supportive tool for decision making in such systems. Practical experiences from implementing a simulation model of a mine for the operational support on an industrial scale are not known to the authors. This paper presents the extension of a developed stochastic simulation model by the authors from a conceptual stage (TRL4 to a new Technology Readiness Level (TRL 6 by implementing it in an industrially relevant environment. A framework for modeling, simulation, and validation of the simulation model applied to two large opencast lignite mines is presented in detail. Operational implementation issues, experiences, and challenges in practical applications are discussed. Furthermore, the strength of applying the simulation modeling as an operational decision support for material management in coal mining is demonstrated. Results of the case studies are used to describe the details of the framework, and to illustrate the strength and limitations of its application.

  6. Short and long term outcomes of 200 patients supported by continuous-flow left ventricular assist devices

    Institute of Scientific and Technical Information of China (English)

    Athanasios; Tsiouris; Gaetano; Paone; Hassan; W; Nemeh; Jamil; Borgi; Celeste; T; Williams; David; E; Lanfear; Jeffrey; A; Morgan

    2015-01-01

    AIM: To study the institutional experience over 8 years with 200 continuous-flow(CF)- left ventricular assist devices(LVAD).METHODS: We evaluated our institution’s LVAD database and analyzed all patients who received a CF LVAD as a bridge to transplant(BTT) or destination therapy from March 2006 until June 2014. We identified 200 patients, of which 179 were implanted with a Heart Mate II device(Thoratec Corp., Pleasanton, CA) and 21 received a Heartware HVAD(Heart Ware Inc., Framingham, MA).RESULTS: The mean age of our LVAD recipients was 59.3 years(range 17-81), 76%(152/200) were males, and 49% were implanted for the indication of BTT. The survival rate for our LVAD patients at 30 d, 6 mo, 12 mo, 2 years, 3 years, and 4 years was 94%, 86%, 78%, 71%, 62% and 45% respectively. The mean duration of LVAD support was 581 d(range 2-2595 d). Gastrointestinal bleeding(was the most common adverse event(43/200, 21%), followed by right ventricular failure(38/200, 19%), stroke(31/200, 15%), re exploration for bleeding(31/200, 15%),ventilator dependent respiratory failure(19/200, 9%) and pneumonia(15/200, 7%). Our driveline infection rate was 7%. Pump thrombosis occurred in 6% of patients. Device exchanged was needed in 6% of patients. On multivariate analysis, preoperative liver dysfunction, ventilator dependent respiratory failure, tracheostomy and right ventricular failure requiring right ventricular assist device support were significant predictors of post LVAD survival.CONCLUSION: Short and long term survival for patients on LVAD support are excellent, although outcomes still remain inferior compared to heart transplantation. The incidence of driveline infections, pump thrombosis and pump exchange have declined significantly in recent years.

  7. Adsorptive removal of arsenate from aqueous solutions by biochar supported zero-valent iron nanocomposite: Batch and continuous flow tests

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Shengsen [Department of Agricultural and Biological Engineering, University of Florida, Gainesville, FL 32611 (United States); Gao, Bin, E-mail: bg55@ufl.edu [Department of Agricultural and Biological Engineering, University of Florida, Gainesville, FL 32611 (United States); Li, Yuncong [Tropical Research and Education Center, University of Florida, Homestead, FL 33031 (United States); Creamer, Anne Elise [Department of Agricultural and Biological Engineering, University of Florida, Gainesville, FL 32611 (United States); He, Feng [College of Biological and Environmental Engineering, Zhejiang University of Technology, Hangzhou, Zhejiang 310014 (China)

    2017-01-15

    Highlights: • Biochar supported nZVI (nZVI/BC) was synthesized. • nZVI/BC showed excellent As(V) removal efficiency in batch and CMR experiments. • 100% removal efficiency was achieved in CMRs. • Surface adsorption was the dominant removal mechanism. - Abstract: Arsenate (As(V)) removal ability by nanoscale zero-valent iron (nZVI) is compromised by aggregation of nZVI particles. In this work, pine derived biochar (PB) was used as a supporting material to stabilize nZVI for As(V) removal. The biochar supported nZVI (nZVI/BC) was synthesized by precipitating the nanoparticles on carbon surfaces. Experiments using batch and continuous flow, completely mixed reactors (CMRs) were carried out to investigate the removal of As(V) by the nZVI/BC from aqueous solutions. Batch experiments showed that nZVI/BC had high As(V) removal capacity in a wide range of pH (3–8). Kinetic data revealed that equilibrium was reached within 1 h and the isotherm data showed that the Langmuir maximum adsorption capacity of the nZVI/BC for As(V) at pH 4.1 was 124.5 g kg{sup −1}. As(V) (100 mg L{sup −1}) adsorption in anoxic condition was about 8% more than in oxic conditions, where As(V) reduction was observed in anoxic condition. The performance of the nZVI/BC in flowing condition was evaluated in CMRs at influent As(V) concentrations of 2.1 and 5.5 mg L{sup −1} and the adsorbent removed 100% and 90% of the As(V), respectively. Furthermore, the nZVI/BC composite is magnetic which facilitates collection from aqueous solutions.

  8. Correlations Between Hysteretic Categorical and Continuous Judgments of Perceptual Stimuli Supporting a Unified Dynamical Systems Approach to Perception.

    Science.gov (United States)

    Kim, S; Frank, T D

    2017-01-01

    We report from two variants of a figure-ground experiment that is known in the literature to involve a bistable perceptual domain. The first variant was conducted as a two-alternative forced-choice experiment and in doing so tested participants on a categorical measurement scale. The second variant involved a Likert scale measure that was considered to represent a continuous measurement scale. The two variants were conducted as a single within-subjects experiment. Measures of bistability operationalized in terms of hysteresis size scores showed significant positive correlations across the two response conditions. The experimental findings are consistent with a dualistic interpretation of self-organizing perceptual systems when they are described on a macrolevel by means of so-called amplitude equations. This is explicitly demonstrated for a Lotka-Volterra-Haken amplitude equation model of task-related brain activity. As a by-product, the proposed dynamical systems perspective also sheds new light on the anchoring problem of producing numerical, continuous judgments.

  9. ICDP supported coring in IDDP-2 at Reykjanes - the DEEPEGS demonstrator in Iceland - Supercritical conditions reached below 4.6 km depth.

    Science.gov (United States)

    Ómar Friðleifsson, Guðmundur; Elders, Wilfred A.; Zierenberg, Robert; Steafánsson, Ari; Sigurðsson, Ómar; Gíslason, Þór; Weisenberger, Tobias B.; Harðarson, Björn S.; Mesfin, Kiflom G.

    2017-04-01

    days partial heating-up. The injectivity index proved to be 1.7 (kg/s)/bar. Supercritical conditions were measured at the bottom, 427°C at 340 bar pressure. The T-log showed the main permeable zones to be at around 3360m, 4200m, 4370m and 4550m depth. Estimates suggest that 30% of 40 L/s injected into the well are received by the three deepest feed zones. This can possibly be enhanced by massive soft stimulation, which is a part of the DEEPEGS plan to be executed later this year. The DEEPEGS project is a demonstration project, supported by the European Commission, Horizon 2020. The goal is to demonstrate the feasibility of enhanced geothermal systems (EGS) for delivering energy from renewable resources in Europe. It is a four-year project coordinated by HS Orka, Iceland, in cooperation with partners from Iceland, France, Germany, Italy, and Norway. The project will demonstrate advanced technologies in three types of geothermal reservoirs, (i) in high enthalpy resource beneath existing hydrothermal field at Reykjanes with temperature up to 550°C, and (ii) in two very deep hydrothermal reservoirs in France with temperatures up to 220°C.

  10. Propene and l-octene hydroformylation with silica-supported, ionic liquid-phase (SILP) Rh-phosphine catalysts in continuous fixed-bed mode

    DEFF Research Database (Denmark)

    Riisager, Anders; Eriksen, Kim Michael; Wasserscheid, Peter

    2003-01-01

    Supported ionic liquid-phase (SILP) catalysts were made by immobilizing Rh-monophosphine complexes of bis(m-phenylguanidinium) phenylphosphine 1 and NORBOS 2 ligands in 1-n-butyl-3-methylimidazolium hexafluorophosphate, [BMIM] [PF6], on a silica support. The catalysts were active in continuous ga...

  11. Continuing professional development: researching non-technical competencies can support cognitive reappraisal and reduced stress in clinicians.

    Science.gov (United States)

    Kinnison, Tierney; May, Stephen

    2017-09-09

    Generic professional capabilities (non-technical competencies) are increasingly valued for their links to patient outcomes and clinician well-being. This study explores the emotional change, and practice-related outcomes, of participants of a veterinary professional key skills (PKS) continuing professional development (CPD) module. Reflective summaries produced by participants were analysed. A change in emotion, from 'negative' to 'positive', was the focus of analysis. Sections regarding these emotions were thematically analysed. Analysis was performed on 46 summaries. Three themes were identified: 'the PKS module' (centred on reluctance becoming surprise and stimulation), 'developing non-technical competencies' (unease to confidence) and 'stress and coping through a reflective focus' (anxiety to harmony). The changing emotions were connected to positive cognitive reappraisal and often behaviour changes, benefitting self, practice, clients and patients. The PKS module teaches participants to reflect; a new and challenging concept. The consequences of this enabled participants to understand the importance of professional topics, to be appreciative as well as critical, and to enjoy their job. Importantly, the module stimulated coping responses. Better understanding of roles led to participants having more reasonable expectations of themselves, more appreciation of their work and reduced stress. This research supports more attention to professional skills CPD for health professions. © British Veterinary Association (unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  12. Operations Support of Phase 2 Integrated Demonstration In Situ Bioremediation. Volume 1, Final report: Final report text data in tabular form, Disk 1

    Energy Technology Data Exchange (ETDEWEB)

    Hazen, T.C. [Westinghouse Savannah River Co., Aiken, SC (United States)

    1993-09-01

    This project was designed to demonstrate in situ bioremediation of ground water and sediment contaminated with chlorinated solvents. Indigenous microorganisms were stimulated to degrade trichlorethylene (TCE), tetrachloroethylene (PCE) and their daughter products in situ by addition of nutrients to the contaminated aquifer and adjacent vadose zone. The principle carbon/energy source nutrient used in this demonstration was methane (natural gas). In situ biodegradation is a highly attractive technology for remediation because contaminants are destroyed, not simply moved to another location or immobilized, thus decreasing costs, risks, and time, while increasing efficiency, safety, and public and regulatory acceptability. This report describes the preliminary results of the demonstration and provides conclusions only for those measures that the Bioremediation Technical Support Group felt were so overwhelmingly convincing that they do not require further analyses. Though this report is necessarily superficial it does intend to provide a basis for further evaluating the technology and for practitioners to immediately apply some parts of the technology.

  13. Opportunistic pathogens and elements of the resistome that are common in bottled mineral water support the need for continuous surveillance.

    Directory of Open Access Journals (Sweden)

    Maria Fernanda Falcone-Dias

    Full Text Available Several differences concerning bacterial species, opportunistic pathogens, elements of the resistome as well as variations concerning the CFU/mL counts were identified in some of the five most marketed bottled mineral water from Araraquara city, São Paulo, Brazil. Two out of five brands tested were confirmed as potential source of opportunistic pathogens, including Mycobacterium gordonae, Ralstonia picketti and Burkholderia cepacia complex (Bcc. A total of one hundred and six isolates were recovered from four of these bottled mineral water brands. Betaproteobacteria was predominant followed by Alphaproteobacteria, Gammaproteobacteria and Firmicutes. Ninety percent of the bacteria isolated demonstrated resistance to seventeen of the nineteen antimicrobials tested. These antimicrobials included eight different classes, including 3rd and 4th generation cephalosporins, carbapenems and fluoroquinolones. Multidrug resistant bacteria were detected for fifty-nine percent of isolates in three water brands at counts up to 103 CFU/ml. Of major concern, the two bottled mineral water harboring opportunistic pathogens were also source of elements of the resistome that could be directly transferred to humans. All these differences found among brands highlight the need for continuous bacteriological surveillance of bottled mineral water.

  14. Opportunistic pathogens and elements of the resistome that are common in bottled mineral water support the need for continuous surveillance.

    Science.gov (United States)

    Falcone-Dias, Maria Fernanda; Centrón, Daniela; Pavan, Fernando; Moura, Adriana Candido da Silva; Naveca, Felipe Gomes; de Souza, Victor Costa; Farache Filho, Adalberto; Leite, Clarice Queico Fujimura

    2015-01-01

    Several differences concerning bacterial species, opportunistic pathogens, elements of the resistome as well as variations concerning the CFU/mL counts were identified in some of the five most marketed bottled mineral water from Araraquara city, São Paulo, Brazil. Two out of five brands tested were confirmed as potential source of opportunistic pathogens, including Mycobacterium gordonae, Ralstonia picketti and Burkholderia cepacia complex (Bcc). A total of one hundred and six isolates were recovered from four of these bottled mineral water brands. Betaproteobacteria was predominant followed by Alphaproteobacteria, Gammaproteobacteria and Firmicutes. Ninety percent of the bacteria isolated demonstrated resistance to seventeen of the nineteen antimicrobials tested. These antimicrobials included eight different classes, including 3rd and 4th generation cephalosporins, carbapenems and fluoroquinolones. Multidrug resistant bacteria were detected for fifty-nine percent of isolates in three water brands at counts up to 103 CFU/ml. Of major concern, the two bottled mineral water harboring opportunistic pathogens were also source of elements of the resistome that could be directly transferred to humans. All these differences found among brands highlight the need for continuous bacteriological surveillance of bottled mineral water.

  15. Time-varying Reeb Graphs: A Topological Framework Supporting the Analysis of Continuous Time-varying Data

    Energy Technology Data Exchange (ETDEWEB)

    Mascarenhas, Ajith Arthur [Univ. of North Carolina, Chapel Hill, NC (United States)

    2006-01-01

    I present time-varying Reeb graphs as a topological framework to support the analysis of continuous time-varying data. Such data is captured in many studies, including computational fluid dynamics, oceanography, medical imaging, and climate modeling, by measuring physical processes over time, or by modeling and simulating them on a computer. Analysis tools are applied to these data sets by scientists and engineers who seek to understand the underlying physical processes. A popular tool for analyzing scientific datasets is level sets, which are the points in space with a fixed data value s. Displaying level sets allows the user to study their geometry, their topological features such as connected components, handles, and voids, and to study the evolution of these features for varying s. For static data, the Reeb graph encodes the evolution of topological features and compactly represents topological information of all level sets. The Reeb graph essentially contracts each level set component to a point. It can be computed efficiently, and it has several uses: as a succinct summary of the data, as an interface to select meaningful level sets, as a data structure to accelerate level set extraction, and as a guide to remove noise. I extend these uses of Reeb graphs to time-varying data. I characterize the changes to Reeb graphs over time, and develop an algorithm that can maintain a Reeb graph data structure by tracking these changes over time. I store this sequence of Reeb graphs compactly, and call it a time-varying Reeb graph. I augment the time-varying Reeb graph with information that records the topology of level sets of all level values at all times, that maintains the correspondence of level set components over time, and that accelerates the extraction of level sets for a chosen level value and time. Scientific data sampled in space-time must be extended everywhere in this domain using an interpolant. A poor choice of interpolant can create degeneracies that are

  16. IDegLira Improves Both Fasting and Postprandial Glucose Control as Demonstrated Using Continuous Glucose Monitoring and a Standardized Meal Test

    DEFF Research Database (Denmark)

    Holst, Jens J; Buse, John B; Rodbard, Helena W

    2016-01-01

    : In this substudy, 260 (15.6%) of the original 1663 patients with inadequate glycemic control participating in a 26-week, open-label trial (DUAL I) were randomized 2:1:1 to once-daily IDegLira, insulin degludec or liraglutide. Continuous glucose monitoring (CGM) for 72 hours and a meal test were performed. RESULTS......: At week 26, IDegLira produced a significantly greater decrease from baseline in mean PPG increment (normalized iAUC0-4h) than insulin degludec (estimated treatment difference [ETD] -12.79 mg/dl [95% CI: -21.08; -4.68], P = .0023) and a similar magnitude of decrease as liraglutide (ETD -1.62 mg/dl [95% CI......: -10.09; 6.67], P = .70). CGM indicated a greater reduction in change from baseline in PPG increment (iAUC0-4h) for IDegLira versus insulin degludec over all 3 main meals (ETD -6.13 mg/dl [95% CI: -10.27, -1.98], P = .0047) and similar reductions versus liraglutide (ETD -1.80 mg/dl [95% CI: -2.52, 5...

  17. Continuous blood pressure monitoring via non-invasive radial artery applanation tonometry and invasive arterial catheter demonstrates good agreement in patients undergoing colon carcinoma surgery.

    Science.gov (United States)

    Sun, Jing; Chen, Hanjian; Zheng, Jun; Mao, Bin; Zhu, Shengmei; Feng, Jingyi

    2016-12-20

    Radial artery applanation tonometry (RAAT) has been developed and utilized for continuous arterial pressure monitoring. However, evidence is lacking to clinically verify the RAAT technology and identify appropriate patient groups before routine clinical use. This study aims to evaluate the RAAT technology by comparing systolic blood pressure (SBP), mean blood pressure (MBP) and diastolic blood pressure (DBP) values in patients undergoing colon carcinoma surgery. Blood Pressure (BP) values obtained via RAAT (TL-300, Tensys Medical Inc., San Diego, CA, USA) and conventional arterial catheterization from 30 colon carcinoma surgical patients were collected and compared via Bland-Atman method, linear regression and 4-quadrant plot concordance analysis. For SBPs, MBPs and DBPs, means of the differences (±standard deviation; 95% limits of agreement) were -0.9 (±7.6; -15.7 to 13.9) mmHg, 3.1 (±6.5; -9.6 to 15.8) mmHg and 4.3 (±7.4; -10.3 to 18.8) mmHg, respectively. Linear regression coefficients of determination were 0.8706 for SBPs, 0.8353 for MBPs and 0.6858 for DBPs. Four-quadrant concordance correlation coefficients were 0.8740, 0.8522 and 0.7108 for SBPs, MBPs and DBPs, respectively. A highly selected patient collective undergoing colon carcinoma surgery was studied. BP measurements obtained via the TL-300 had clinically acceptable agreement with that acquired invasively using an arterial catheter. For use in clinical routine, it is necessary to take measures for improvement regarding movement artifacts and dilution of noise. A large sample size of patients under various conditions is also needed to further evaluate the RAAT technology before clinically routine use.

  18. A quasi-positive family of continuous Darcy-flux finite-volume schemes with full pressure support

    Science.gov (United States)

    Edwards, Michael G.; Zheng, Hongwen

    2008-11-01

    A new family of flux-continuous, locally conservative, finite-volume schemes is presented for solving the general tensor pressure equation of subsurface flow in porous media. The new schemes have full pressure continuity imposed across control-volume faces. Previous families of flux-continuous schemes are point-wise continuous in pressure and flux. When applying the earlier point-wise flux-continuous schemes to strongly anisotropic full-tensor fields their failure to satisfy a maximum principle (as with other FEM and finite-volume methods) can result in loss of local stability for high anisotropy ratios which can cause strong spurious oscillations in the numerical pressure solution. An M-matrix analysis reveals the upper limits for guaranteeing a maximum principle for general 9-point schemes and aids in the design of schemes that minimize the occurrence of spurious oscillations in the discrete pressure field. The full pressure continuity schemes are shown to possess a larger range of flux-continuous schemes, than the previous point-wise counter parts. For strongly anisotropic full-tensor cases it is shown that the full quadrature range possessed by the new schemes permits these schemes to exploit quadrature points (previously out of range) that are shown to minimize spurious oscillations in discrete pressure solutions. The new formulation leads to a more robust quasi-positive family of flux-continuous schemes applicable to general discontinuous full-tensor fields.

  19. Hamilton--Jacobi theory for continuation of magnetic field across a toroidal surface supporting a plasma pressure discontinuity

    CERN Document Server

    McGann, M; Dewar, R L; von Nessi, G

    2010-01-01

    The vanishing of the divergence of the total stress tensor (magnetic plus kinetic) in a neighborhood of an equilibrium plasma containing a toroidal surface of discontinuity gives boundary and jump conditions that strongly constrain allowable continuations of the magnetic field across the surface. The boundary conditions allow the magnetic fields on either side of the discontinuity surface to be described by surface magnetic potentials, reducing the continuation problem to that of solving a Hamilton--Jacobi equation. The characteristics of this equation obey Hamiltonian equations of motion, and a necessary condition for the existence of a continued field across a general toroidal surface is that there exist invariant tori in the phase space of this Hamiltonian system. It is argued from the Birkhoff theorem that existence of such an invariant torus is also, in general, sufficient for continuation to be possible. An important corollary is that the rotational transform of the continued field on a surface of disco...

  20. Expert System Shells for Rapid Clinical Decision Support Module Development: An ESTA Demonstration of a Simple Rule-Based System for the Diagnosis of Vaginal Discharge.

    Science.gov (United States)

    Kamel Boulos, Maged N

    2012-12-01

    This study demonstrates the feasibility of using expert system shells for rapid clinical decision support module development. A readily available expert system shell was used to build a simple rule-based system for the crude diagnosis of vaginal discharge. Pictures and 'canned text explanations' are extensively used throughout the program to enhance its intuitiveness and educational dimension. All the steps involved in developing the system are documented. The system runs under Microsoft Windows and is available as a free download at http://healthcybermap.org/vagdisch.zip (the distribution archive includes both the program's executable and the commented knowledge base source as a text document). The limitations of the demonstration system, such as the lack of provisions for assessing uncertainty or various degrees of severity of a sign or symptom, are discussed in detail. Ways of improving the system, such as porting it to the Web and packaging it as an app for smartphones and tablets, are also presented. An easy-to-use expert system shell enables clinicians to rapidly become their own 'knowledge engineers' and develop concise evidence-based decision support modules of simple to moderate complexity, targeting clinical practitioners, medical and nursing students, as well as patients, their lay carers and the general public (where appropriate). In the spirit of the social Web, it is hoped that an online repository can be created to peer review, share and re-use knowledge base modules covering various clinical problems and algorithms, as a service to the clinical community.

  1. Incidence of ventricular arrhythmias in patients on long-term support with a continuous-flow assist device (HeartMate II)

    DEFF Research Database (Denmark)

    Andersen, Mads; Videbaek, Regitze; Boesgaard, Søren;

    2009-01-01

    The incidence of ventricular tachycardia (VT) or ventricular fibrillation (VF) in patients supported with a continuous-flow left ventricular assist device (LVAD) has not been investigated in detail. In 23 consecutive recipients of a HeartMate II, we analyzed the incidence of VT/VF during a total...

  2. Continuous traffic flow modeling of driver support systems in multiclass traffic with inter-vehicle communication and drivers in the loop

    NARCIS (Netherlands)

    Tampere, C.M.J.; Hoogendoorn, S.P.; Arem, B. van

    2009-01-01

    This paper presents a continuous traffic-flow model for the explorative analysis of advanced driver-assistance systems (ADASs). Such systems use technology (sensors and intervehicle communication) to support the task of the driver, who retains full control over the vehicle. Based on a review of diff

  3. Offshore code comparison collaboration continuation (OC4), phase I - Results of coupled simulations of an offshore wind turbine with jacket support structure

    DEFF Research Database (Denmark)

    Popko, Wojciech; Vorpahl, Fabian; Zuga, Adam;

    2012-01-01

    In this paper, the exemplary results of the IEA Wind Task 30 "Offshore Code Comparison Collaboration Continuation" (OC4) Project - Phase I, focused on the coupled simulation of an offshore wind turbine (OWT) with a jacket support structure, are presented. The focus of this task has been...

  4. DEVELOPMENT AND DEMONSTRATION OF A PILOT SCALE FACILITY FOR FABRICATION AND MARKETING OF LIGHTWEIGHT-COAL COMBUSTION BYPRODUCTS-BASED SUPPORTS AND MINE VENTILATION BLOCKS FOR UNDERGROUND MINES

    Energy Technology Data Exchange (ETDEWEB)

    Yoginder P. Chugh

    2002-10-01

    The overall goal of this program was to develop a pilot scale facility, and design, fabricate, and market CCBs-based lightweight blocks for mine ventilation control devices, and engineered crib elements and posts for use as artificial supports in underground mines to replace similar wooden elements. This specific project was undertaken to (1) design a pilot scale facility to develop and demonstrate commercial production techniques, and (2) provide technical and marketing support to Fly Lite, Inc to operate the pilot scale facility. Fly Lite, Inc is a joint venture company of the three industrial cooperators who were involved in research into the development of CCBs-based structural materials. The Fly-Lite pilot scale facility is located in McLeansboro, Illinois. Lightweight blocks for use in ventilation stoppings in underground mines have been successfully produced and marketed by the pilot-scale facility. To date, over 16,000 lightweight blocks (30-40 pcf) have been sold to the mining industry. Additionally, a smaller width (6-inch) full-density block was developed in August-September 2002 at the request of a mining company. An application has been submitted to Mine Safety and Health Administration for the developed block approval for use in mines. Commercialization of cribs and posts has also been accomplished. Two generations of cribs have been developed and demonstrated in the field. MSHA designated them suitable for use in mines. To date, over 2,000 crib elements have been sold to mines in Illinois. Two generations of posts were also demonstrated in the field and designated as suitable for use in mines by MSHA. Negotiations are currently underway with a mine in Illinois to market about 1,000 posts per year based on a field demonstration in their mine. It is estimated that 4-5 million tons CCBs (F-fly ash or FBC fly ash) may be utilized if the developed products can be commercially implemented in U.S. coal and non-coal mines.

  5. Maui Smart Grid Demonstration Project Managing Distribution System Resources for Improved Service Quality and Reliability, Transmission Congestion Relief, and Grid Support Functions

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2014-09-30

    The Maui Smart Grid Project (MSGP) is under the leadership of the Hawaii Natural Energy Institute (HNEI) of the University of Hawaii at Manoa. The project team includes Maui Electric Company, Ltd. (MECO), Hawaiian Electric Company, Inc. (HECO), Sentech (a division of SRA International, Inc.), Silver Spring Networks (SSN), Alstom Grid, Maui Economic Development Board (MEDB), University of Hawaii-Maui College (UHMC), and the County of Maui. MSGP was supported by the U.S. Department of Energy (DOE) under Cooperative Agreement Number DE-FC26-08NT02871, with approximately 50% co-funding supplied by MECO. The project was designed to develop and demonstrate an integrated monitoring, communications, database, applications, and decision support solution that aggregates renewable energy (RE), other distributed generation (DG), energy storage, and demand response technologies in a distribution system to achieve both distribution and transmission-level benefits. The application of these new technologies and procedures will increase MECO’s visibility into system conditions, with the expected benefits of enabling more renewable energy resources to be integrated into the grid, improving service quality, increasing overall reliability of the power system, and ultimately reducing costs to both MECO and its customers.

  6. Continuous Medication Monitoring (CoMM): A foundational model to support the clinical work of community pharmacists.

    Science.gov (United States)

    Goedken, Amber M; Butler, Christine M; McDonough, Randal P; Deninger, Michael J; Doucette, William R

    2017-01-02

    Under the Continuous Medication Monitoring (CoMM) approach, community pharmacists prevent, identify, resolve, and document drug therapy problems during the dispensing process. To describe the patients receiving CoMM interventions and the pattern of delivery of CoMM interventions. Pharmacy dispensing and clinical records were reviewed for patients filling at least one prescription and receiving at least one continuous medication monitoring intervention at a community pharmacy from April 2014 through March 2015. The proportion of patients receiving an intervention type and the number of interventions per patient were computed. Nearly 2500 patients received 16,986 continuous medication monitoring interventions over the year. The average age of the patients receiving the interventions was 59.1 years, and they filled an average of 8.0 unique medications. An average of 6.8 interventions was delivered to each patient. About half (49.7%) of interventions addressed drug therapy problems. The pharmacists delivered 3.0 patient counseling and education and 3.4 drug therapy problem interventions per patient on average. There are many opportunities to improve patients' medication use that can be identified and addressed under a Continuous Medication Monitoring model. Movement to this model of practice is desirable, but changes are needed to facilitate the shift. Copyright © 2017 Elsevier Inc. All rights reserved.

  7. Neurohormonal activation and exercise tolerance in patients supported with a continuous-flow left ventricular assist device

    DEFF Research Database (Denmark)

    Jung, Mette Holme; Goetze, Jens Peter; Boesgaard, Soeren;

    2016-01-01

    BACKGROUND: Neurohormones play a key role in regulating hemodynamics in heart failure (HF) both at rest and during exercise. In contrast, little is known about the importance of neurohormonal regulation for exercise capacity in continuous-flow left ventricular assist device (CF-LVAD) patients...

  8. Understanding the continuous renal replacement therapy circuit for acute renal failure support: a quality issue in the intensive care unit.

    Science.gov (United States)

    Boyle, Martin; Baldwin, Ian

    2010-01-01

    Delivery of renal replacement therapy is now a core competency of intensive care nursing. The safe and effective delivery of this form of therapy is a quality issue for intensive care, requiring an understanding of the principles underlying therapy and the functioning of machines used. Continuous hemofiltration, first described in 1977, used a system where blood flowed from arterial to venous cannulas through a small-volume, low-resistance, and high-flux filter. Monitoring of these early systems was limited, and without a machine interface, less nursing expertise was required. Current continuous renal replacement therapy machines offer user-friendly interfaces, cassette-style circuits, and comprehensive circuit diagnostics and monitoring. Although these machines conceal complexity behind a user-friendly interface, it remains important that nurses have sufficient knowledge for their use and the ability to compare and contrast circuit setups and functions for optimal and efficient treatment.

  9. Protocol Development for the NASA-JSC Lunar-Mars Life Support Test Project (LMLSTP) Phase 3 Project: A Report on Baseline Studies at KSC for Continuous Salad Production

    Science.gov (United States)

    Goins, G. D.; Yorio, N. C.; Vivenzio, H. R.

    1998-01-01

    The Phase 3 Lunar-Mars Life Support Test Project (LMLSTP) was conducted in a 20-foot chamber at Johnson Space Center. The overall objective of the Phase 3 project was to conduct a 90-day regenerative life support system test involving 4 human subjects to demonstrate an integrated biological and physicochemical life support system. A secondary objective of the Phase 3 LMLSTP was to demonstrate the ability to produce salad-type vegetable by integration of a small benchtop growth chamber located within the crew habitat area. This small chamber, commercially manufactured as the Controlled Environment Research Ecosystem (CERES 2010(TM)), functioned as a means to continuously provide fresh lettuce crops for crew members. The CERES 2010(TM) growth chamber utilized hardware components developed for effective plant biomass production in spaceflight applications. These components included: (1) LED lighting; (2) Astroculture(TM) Root Trays; and (3) Zeoponic media. In planning for the LMLSTP Phase 3, a request was put forward for KSC scientists to generate a protocol for successful continuous planting, culturing, and harvesting of the salad-crop, lettuce. By conducting baseline tests with components of the CERES 2010(TM), a protocol was developed.

  10. Social Support as a Neglected E-Learning Motivator Affecting Trainee's Decisions of Continuous Intentions of Usage

    Science.gov (United States)

    Weng, Cathy; Tsai, Chin-Chung; Weng, Apollo

    2015-01-01

    Drawing from the social influence theory and acknowledging that the others' support within the work context affects employees' learning, values, and behaviours, an alternative framework was proposed to explain employees' learning satisfaction and future intention to participate in e-training programs in the current study. 578 survey data collected…

  11. Longitudinal structural, functional, and cellular myocardial alterations with chronic centrifugal continuous-flow left ventricular assist device support.

    Science.gov (United States)

    Muthiah, Kavitha; Humphreys, David T; Robson, Desiree; Dhital, Kumud; Spratt, Phillip; Jansz, Paul; Macdonald, Peter S; Hayward, Christopher S

    2017-07-01

    Left ventricular assist device (LVAD) support triggers adaptations within failing hearts. The HeartWare (HeartWare International, Inc., Framingham, MA) LVAD exhibits different flow profiles and afterload dependence compared with previous-generation devices, which may alter remodelling patterns. We sought to characterize myocardial adaptation to third-generation centrifugal-flow LVADs at a functional, hemodynamic, and structural level in addition to profiling transcriptomal changes using next-generation sequencing platforms. We studied 37 patients supported with the HeartWare device with paired measurements of invasive hemodynamics, serial longitudinal left ventricular (LV) and right ventricular (RV) 3-dimensional echocardiography, and N-terminal of the prohormone brain natriuretic peptide (NT-proBNP) measurements. Paired samples for comparison of histologic myocardial cellular size and transcriptomal profiling were performed on specimens taken at pump implant and transplantation. The mean support duration was 280 ± 163 days. Mechanical unloading after HeartWare support resulted in reduced filling pressures (mean pulmonary capillary wedge pressure 27.1 ± 6.6 to 14.8 ± 5.1 mm Hg, p hypertrophy, and an improvement in LV and RV ejection fractions. Crown Copyright © 2017. Published by Elsevier Inc. All rights reserved.

  12. Supporting Children's Thinking in the Foundation Stage: Practitioners' Views on the Role of Initial Training and Continuing Professional Development

    Science.gov (United States)

    Robson, Sue

    2006-01-01

    The English "Curriculum Guidance for the Foundation Stage" refers to the importance of supporting the development of young children's thinking, a teaching role that Kite suggests should be seen as the major focus for education. This paper draws on data from the Froebel Research Fellowship Project, "Ownership and Autonomy in Early…

  13. Social Support as a Neglected E-Learning Motivator Affecting Trainee's Decisions of Continuous Intentions of Usage

    Science.gov (United States)

    Weng, Cathy; Tsai, Chin-Chung; Weng, Apollo

    2015-01-01

    Drawing from the social influence theory and acknowledging that the others' support within the work context affects employees' learning, values, and behaviours, an alternative framework was proposed to explain employees' learning satisfaction and future intention to participate in e-training programs in the current study. 578 survey data collected…

  14. Myocardial changes in patients with end-stage heart failure during continuous flow left ventricular assist device support

    NARCIS (Netherlands)

    Lok, S.I.|info:eu-repo/dai/nl/370140508

    2013-01-01

    With respect to the clinical outcome, cf-LVADs provide sufficient ventricular unloading and circulatory support. The post-operative mortality and morbidity in our centre are comparable with other recent experiences with this device. Based on these data, Heart Mate II (HM II) LVAD therapy can be cons

  15. Anthrax vaccine adsorbed: further evidence supporting continuing the vaccination series rather than restarting the series when doses are delayed.

    Science.gov (United States)

    Pittman, Phillip R; Cavicchia, M A; Kingsbury, J L; Johnson, N A; Barrera-Oro, J G; Schmader, T; Korman, L; Quinn, X; Ranadive, M

    2014-09-03

    Whether to restart or continue the series when anthrax vaccine doses are missed is a frequent medical management problem. We applied the noninferiority analysis model to this prospective study comparing the Bacillus anthracis protective antigen (PA) IgG antibody response and lethal toxin neutralization activity at day 28 to the anthrax vaccine adsorbed (AVA) (Biothrax®) administered on schedule or delayed. A total of 600 volunteers were enrolled: 354 in the on-schedule cohort; 246 in the delayed cohort. Differences were noted in immune responses between cohorts (panthrax vaccine are delayed as long as 5 or more years.

  16. Strategies to support engagement and continuity of activity during mealtimes for families living with dementia; a qualitative study

    OpenAIRE

    2015-01-01

    Background Mealtimes are an essential part of living and quality of life for everyone, including persons living with dementia. A longitudinal qualitative study provided understanding of the meaning of mealtimes for persons with dementia and their family care partners. Strategies were specifically described by families to support meaningful mealtimes. The purpose of this manuscript is to describe the strategies devised and used by these families living with dementia. Methods A longitudinal qua...

  17. Linux-based File System Supporting the Continuous Media%基于Linux的文件系统对连续媒体的支持

    Institute of Scientific and Technical Information of China (English)

    王光彩; 黄清华; 顾君忠

    2001-01-01

    For techniques on compress and network and multimedia are developed rapidly, audio & video media become popular. However present operating systems can support the continuous media only on the layer of applications, not in the layer of foundation. In this paper, considerating on the operating system, we discuss how to support the continuous media on the base layer. Then we depict clearly the design and implementation of BLOB ( Binary Large Object) file system which is based on Lin ux.%从操作系统角度考虑了底层文件系统对连续媒体的支持,并详细介绍了在Linux下设计和实现的BLOB(Binary Large Object)文件系统的设计思想及其实现技术细节,并讨论它对连续媒体的支持情况.

  18. Ruthenium carbenes supported on mesoporous silicas as highly active and selective hybrid catalysts for olefin metathesis reactions under continuous flow.

    Science.gov (United States)

    Bru, Miriam; Dehn, Richard; Teles, J Henrique; Deuerlein, Stephan; Danz, Manuel; Müller, Imke B; Limbach, Michael

    2013-08-26

    In the search for a highly active and selective heterogenized metathesis catalyst, we systematically varied the pore geometry and size of various silica-based mesoporous (i.e., MCM-41, MCM-48, and SBA-15) and microporous (ZSM-5 and MWW) versus macroporous materials (D11-10 and Aerosil 200), besides other process parameters (temperature, dilution, and mean residence time). The activity and, especially, selectivity of such "linker-free" supports for ruthenium metathesis catalysts were evaluated in the cyclodimerization of cis-cyclooctene to form 1,9-cyclohexadecadiene, a valuable intermediate in the flavor and fragrance industry. The optimized material showed not only exceptionally high selectivity to the valuable product, but also turned out to be a truly heterogeneous catalyst with superior activity relative to the unsupported homogeneous complex.

  19. Tested Demonstrations.

    Science.gov (United States)

    Sands, Robert; And Others

    1982-01-01

    Procedures for two demonstrations are provided. The solubility of ammonia gas in water is demonstrated by introducing water into a closed can filled with the gas, collapsing the can. The second demonstration relates scale of standard reduction potentials to observed behavior of metals in reactions with hydrogen to produce hydrogen gas. (Author/JN)

  20. High molecular weight FGF2 isoforms demonstrate canonical receptor-mediated activity and support human embryonic stem cell self-renewal

    Directory of Open Access Journals (Sweden)

    Denis Kole

    2017-05-01

    Full Text Available Basic fibroblast growth factor (FGF2 is a highly pleiotropic member of a large family of growth factors with a broad range of activities, including mitogenesis and angiogenesis (Ornitz et al., 1996; Zhang et al., 2006, and it is known to be essential for maintenance of balance between survival, proliferation, and self-renewal in human pluripotent stem cells (Eiselleova et al., 2009; Zoumaro-Djayoon et al., 2011. A single FGF2 transcript can be translated into five FGF2 protein isoforms, an 18 kDa low molecular weight (LMW isoform and four larger high molecular weight (HMW isoforms (Arese et al., 1999; Arnaud et al., 1999. As they are not generally secreted, high molecular weight (HMW FGF2 isoforms have predominantly been investigated intracellularly; only a very limited number of studies have investigated their activity as extracellular factors. Here we report over-expression, isolation, and biological activity of all recombinant human FGF2 isoforms. We show that HMW FGF2 isoforms can support self-renewal of human embryonic stem cells (hESCs in vitro. Exogenous supplementation with HMW FGF2 isoforms also activates the canonical FGFR/MAPK pathway and induces mitogenic activity in a manner similar to that of the 18 kDa FGF2 isoform. Though all HMW isoforms, when supplemented exogenously, are able to recapitulate LMW FGF2 activity to some degree, it appears that certain isoforms tend to do so more poorly, demonstrating a lesser functional response by several measures. A better understanding of isoform-specific FGF2 effects will lead to a better understanding of developmental and pathological FGF2 signaling.

  1. Coupled Hydro-Mechanical Simulations of CO2 Storage Supported by Pressure Management Demonstrate Synergy Benefits from Simultaneous Formation Fluid Extraction

    Directory of Open Access Journals (Sweden)

    Kempka Thomas

    2015-04-01

    Full Text Available We assessed the synergetic benefits of simultaneous formation fluid extraction during CO2 injection for reservoir pressure management by coupled hydro-mechanical simulations at the prospective Vedsted storage site located in northern Denmark. Effectiveness of reservoir pressure management was investigated by simulation of CO2 storage without any fluid extraction as well as with 66% and 100% equivalent volume formation fluid extraction from four wells positioned for geothermal heat recovery. Simulation results demonstrate that a total pressure reduction of up to about 1.1 MPa can be achieved at the injection well. Furthermore, the areal pressure perturbation in the storage reservoir can be significantly decreased compared to the simulation scenario without any formation fluid extraction. Following a stress regime analysis, two stress regimes were considered in the coupled hydro-mechanical simulations indicating that the maximum ground surface uplift is about 0.24 m in the absence of any reservoir pressure management. However, a ground uplift mitigation of up to 37.3% (from 0.24 m to 0.15 m can be achieved at the injection well by 100% equivalent volume formation fluid extraction. Well-based adaptation of fluid extraction rates can support achieving zero displacements at the proposed formation fluid extraction wells located close to urban infrastructure. Since shear and tensile failure do not occur under both stress regimes for all investigated scenarios, it is concluded that a safe operation of CO2 injection with simultaneous formation fluid extraction for geothermal heat recovery can be implemented at the Vedsted site.

  2. Progress report: Continued development of an integrated sounding system in support of the DOE/ARM experimental program

    Energy Technology Data Exchange (ETDEWEB)

    Edgeworth R. Westwater; Kenneth S. Gage; Yong Han; Joseph A. Shaw; Jim H. Churnside

    1996-09-06

    From January 6 to February 28, 1993, the second phase of the Prototype Radiation Observation Experiment (PROBE) was conducted in Kavieng, Papua New Guinea. Data taken during PROBE included frequent radiosondes, 915 MHz Wind profiler/Radio Acoustic Sounding System (RASS) observations of winds and temperatures, and lidar measurements of cloud-base heights. In addition, a dual-channel Microwave Water Substance Radiometer (MWSR) at 23.87 and 31.65 GHz and a Fourier Transform Infrared Radiometer (FTIR) were operated. The FTIR operated between 500 and 2000 cm{sup -1} and measured some of the first high spectral resolution (1 cm{sup -1}) radiation data taken in the tropics. The microwave radiometer provided continuous measurements with 30-second resolution of precipitable water vapor (PWV) and integrated cloud liquid (ICL), the RASS measured virtual temperature profiles every 30 minutes, and the cloud lidar provided episodic measurements of clouds every minute. The RASS, MWSR, and FTIR data taken during PROBE were compared with radiosonde data. Broadband longwave and shortwave irradiance data and lidar data were used to identify the presence of cirrus clouds and clear conditions. Comparisons were made between measured and calculated radiance during clear conditions, using radiosonde data as input to a Line-By-Line Radiative Transfer Model. Comparisons of RASS-measured virtual temperature with radiosonde data revealed a significant cold bias below 500 m.

  3. Elective nasal continuous positive airway pressure to support respiration after prolonged ventilation in infants after congenital cardiac surgery

    Science.gov (United States)

    Gandhi, Hemang; Mishra, Amit; Thosani, Rajesh; Acharya, Himanshu; Shah, Ritesh; Surti, Jigar; Sarvaia, Alpesh

    2017-01-01

    Background: We sought to compare the effectiveness of oxygen (O2) treatment administered by an O2 mask and nasal continuous positive airway pressure (NCPAP) in infants after congenital cardiac surgery. Methods: In this retrospective observational study, 54 infants undergoing corrective cardiac surgery were enrolled. According to the anesthesiologist's preference, the patients ventilated for more than 48 h were either put on NCPAP or O2 mask immediately after extubation. From pre-extubation to 24 h after treatment, arterial blood gas and hemodynamic data were measured. Results: After 24 h of NCPAP institution, the patients showed a significant improvement in oxygenation compared to O2 mask group. Respiratory rate (per minute) decreased from 31.67 ± 4.55 to 24.31 ± 3.69 (P < 0.0001), PO2 (mmHg) increased from 112.12 ± 22.83 to 185.74 ± 14.81 (P < 0.0001), and PCO2 (mmHg) decreased from 42.88 ± 5.01 to 37.00 ± 7.22 (P < 0.0076) in patients on NCPAP. In this group, mean pediatric cardiac surgical Intensive Care Unit (PCSICU) stay was 4.72 ± 1.60 days, with only 2 (11.11%) patients requiring re-intubation. Conclusion: NCPAP can be used safely and effectively in infants undergoing congenital cardiac surgery to improve oxygenation/ventilation. It also reduces the work of breathing, PCSICU stay, and may reduce the likelihood of re-intubation. PMID:28163425

  4. Exercise hemodynamics during extended continuous flow left ventricular assist device support: the response of systemic cardiovascular parameters and pump performance.

    Science.gov (United States)

    Martina, Jerson; de Jonge, Nicolaas; Rutten, Marcel; Kirkels, J Hans; Klöpping, Corinne; Rodermans, Ben; Sukkel, Eveline; Hulstein, Nelienke; Mol, Bas; Lahpor, Jaap

    2013-09-01

    Patients on continuous flow left ventricular assist devices (cf-LVADs) are able to return to an active lifestyle and perform all sorts of physical activities. This study aims to evaluate exercise hemodynamics in patients with a HeartMate II cf-LVAD (HM II). Thirty (30) patients underwent a bicycle exercise test. Along with exercise capacity, systemic cardiovascular responses and pump performance were evaluated at 6 and 12 months after HM II implantation. From rest to maximum exercise, heart rate increased from 87 ± 14 to 140 ± 32 beats/minute (bpm) (P<0.01), while systolic arterial blood pressure increased from 93 ± 12 to 116 ± 21 mm Hg (P<0.01). Total cardiac output (TCO) increased from 4.1 ± 1.1 to 8.5 ± 2.8 L/min (P<0.01) while pump flow increased less, from 5.1 ± 0.7 to 6.4 ± 0.6 L/min (P<0.01). Systemic vascular resistance (SVR) decreased from 1776 ± 750 to 1013 ± 83 dynes.s/cm(5) (P<0.001) and showed the strongest correlation with TCO (r= -0.72; P<0.01). Exercise capacity was affected by older age, while blood pressure increased significantly in men compared with women. Exercise capacity remained consistent at 6 and 12 months after HM II implantation, 51% ± 13% and 52% ± 13% of predicted VO2 max for normal subjects corrected for age and gender. In conclusion, pump flow of the HM II may contribute partially to TCO during exercise, while SVR was the strongest determinant of TCO.

  5. Supported Photocatalyst for Removal of Emerging Contaminants from Wastewater in a Continuous Packed-Bed Photoreactor Configuration

    Directory of Open Access Journals (Sweden)

    Mª Emma Borges

    2015-02-01

    Full Text Available Water pollution from emerging contaminants (ECs or emerging pollutants is an important environmental problem. Heterogeneous photocatalytic treatment, as advanced oxidation treatment of wastewater effluents, has been proposed to solve this problem. In this paper, a heterogeneous photocatalytic process was studied for emergent contaminants removal using paracetamol as a model contaminant molecule. TiO2 photocatalytic activity was evaluated using two photocatalytic reactor configurations: Photocatalyst solid suspension in wastewater in a stirred photoreactor and TiO2 supported on glass spheres (TGS configuring a packed bed photoreactor. The surface morphology and texture of the TGS were monitored by scanning electron microscope (SEM. The influence of photocatalyst amount and wastewater pH were evaluated in the stirred photoreactor and the influence of wastewater flowrate was tested in the packed bed photoreactor, in order to obtain the optimal operation conditions. Moreover, results obtained were compared with those obtained from photolysis and adsorption studies, using the optimal operation conditions. Good photocatalytic activities have been observed and leads to the conclusion that the heterogeneous photocatalytic system in a packed bed is an effective method for removal of emerging pollutants.

  6. Continuous reporting of new cases in Spain supports the relationship between Herbalife® products and liver injury.

    Science.gov (United States)

    Manso, Gloria; López-Rivas, Laureano; Salgueiro, M Esther; Duque, Jose M; Jimeno, Francisco J; Andrade, Raúl J; Lucena, M Isabel

    2011-10-01

    Previous publications have linked Herbalife® products to hepatotoxicity. The identification of earlier cases in which the culprit agent could not be established raised the hypothesis of a possible contamination of some specific batches of Herbalife products. We searched the Spanish Pharmacovigilance Centres' database of adverse reactions for reports of liver injury associated with the use of Herbalife products from 2003, when the first case was submitted, through September 2010. The search resulted in 20 reports of liver damage (mean age, 49 years; 16 women), with 12 patients (60%) requiring hospitalization. Hepatocellular damage predominated, and nine (53%) of the hepatocellular cases with bilirubin values were jaundiced, fulfilling the Hy's law criteria, which increases the risk for serious outcomes. Two patients experienced a positive rechallenge. One patient developed cirrhosis, whereas all the others recovered. Causality assessment by the Karch and Lasagna modified algorithm showed a category of definite in 1 case, probable in 14, and possible in 5. Analysis of the different Herbalife products that each patient had taken did not enable us to identify any commonly known hepatotoxic ingredient. Our results support the relationship between the consumption of Herbalife products and hepatotoxicity, underscore the concern regarding the liver-related safety of this dietary supplement, and emphasize the need to establish further regulatory measures. Copyright © 2011 John Wiley & Sons, Ltd.

  7. The Social Interaction Phobia Scale: Continued support for the psychometric validity of the SIPS using clinical and non-clinical samples.

    Science.gov (United States)

    Menatti, Alison R; Weeks, Justin W; Carleton, R Nicholas; Morrison, Amanda S; Heimberg, Richard G; Hope, Debra A; Blanco, Carlos; Schneier, Franklin R; Liebowitz, Michael R

    2015-05-01

    The present study sought to extend findings supporting the psychometric validity of a promising measure of social anxiety (SA) symptoms, the Social Interaction Phobia Scale (SIPS; Carleton et al., 2009). Analyses were conducted using three samples: social anxiety disorder (SAD) patients, generalized anxiety disorder (GAD) patients, and healthy controls. SIPS scores of SAD patients demonstrated internal consistency and construct validity, and the previously demonstrated three-factor structure of the SIPS was replicated. Further, the SIPS total score uniquely predicted SA symptoms, and SIPS scores were significantly higher for SAD patients than GAD patients or controls. Two cut-off scores that discriminated SAD patients from GAD patients and from healthy controls were identified. The current study is the first to replicate the SIPS three-factor model in a large, treatment-seeking sample of SAD patients and establish a cut-off score discriminating SAD from GAD patients. Findings support the SIPS as a valid, SAD-specific assessment instrument.

  8. Tested Demonstrations.

    Science.gov (United States)

    Gilbert, George L., Ed.

    1983-01-01

    Free radical chlorination of methane is used in organic chemistry to introduce free radical/chain reactions. In spite of its common occurrence, demonstrations of the reaction are uncommon. Therefore, such a demonstration is provided, including background information, preparation of reactants/reaction vessel, introduction of reactants, irradiation,…

  9. Tested Demonstrations.

    Science.gov (United States)

    Gilbert, George L., Ed.

    1983-01-01

    Discusses a supplement to the "water to rose" demonstration in which a pink color is produced. Also discusses blood buffer demonstrations, including hydrolysis of sodium bicarbonate, simulated blood buffer, metabolic acidosis, natural compensation of metabolic acidosis, metabolic alkalosis, acidosis treatment, and alkalosis treatment. Procedures…

  10. Complete Demonstration.

    Science.gov (United States)

    Yelon, Stephen; Maddocks, Peg

    1986-01-01

    Describes four-step approach to educational demonstration: tell learners they will have to perform; what they should notice; describe each step before doing it; and require memorization of steps. Examples illustrate use of this process to demonstrate a general mental strategy, and industrial design, supervisory, fine motor, and specific…

  11. Tested Demonstrations.

    Science.gov (United States)

    Gilbert, George L., Ed.

    1987-01-01

    Describes two laboratory demonstrations in chemistry. One uses dry ice, freon, and freezer bags to demonstrate volume changes, vapor-liquid equilibrium, a simulation of a rain forest, and vaporization. The other uses the clock reaction technique to illustrate fast reactions and kinetic problems in releasing carbon dioxide during respiration. (TW)

  12. Tested Demonstrations.

    Science.gov (United States)

    Gilbert, George L., Ed.

    1986-01-01

    Outlines a simple, inexpensive way of demonstrating electroplating using the reaction between nickel ions and copper metal. Explains how to conduct a demonstration of the electrolysis of water by using a colored Na2SO4 solution as the electrolyte so that students can observe the pH changes. (TW)

  13. HTA decision support system for sustainable business continuity management in hospitals. The case of surgical activity at the University Hospital in Florence.

    Science.gov (United States)

    Miniati, Roberto; Dori, Fabrizio; Cecconi, Giulio; Gusinu, Roberto; Niccolini, Fabrizio; Gentili, Guido Biffi

    2013-01-01

    A fundamental element of the social and safety function of a health structure is the need to guarantee continuity of clinical activity through the continuity of technology. This paper aims to design a Decision Support System (DSS) for medical technology evaluations based on the use of Key Performance Indicators (KPI) in order to provide a multi-disciplinary valuation of a technology in a health structure. The methodology used in planning the DSS followed the following key steps: the definition of relevant KPIs, the development of a database to calculate the KPIs, the calculation of the defined KPIs and the resulting study report. Finally, the clinical and economic validation of the system was conducted though a case study of Business Continuity applied in the operating department of the Florence University Hospital AOU Careggi in Italy. A web-based support system was designed for HTA in health structures. The case study enabled Business Continuity Management (BCM) to be implemented in a hospital department in relation to aspects of a single technology and the specific clinical process. Finally, an economic analysis of the procedure was carried out. The system is useful for decision makers in that it precisely defines which equipment to include in the BCM procedure, using a scale analysis of the specific clinical process in which the equipment is used. In addition, the economic analysis shows how the cost of the procedure is completely covered by the indirect costs which would result from the expenses incurred from a broken device, hence showing the complete auto-sustainability of the methodology.

  14. Self-supported chiral titanium cluster (SCTC) as a robust catalyst for the asymmetric cyanation of imines under batch and continuous flow at room temperature.

    Science.gov (United States)

    Seayad, Abdul M; Ramalingam, Balamurugan; Chai, Christina L L; Li, Chuanzhao; Garland, Marc V; Yoshinaga, Kazuhiko

    2012-04-27

    A robust heterogeneous self-supported chiral titanium cluster (SCTC) catalyst and its application in the enantioselective imine-cyanation/Strecker reaction is described under batch and continuous processes. One of the major hurdles in the asymmetric Strecker reaction is the lack of availability of efficient and reusable heterogeneous catalysts that work at room temperature. We exploited the readily hydrolyzable nature of titanium alkoxide to synthesize a self-supported chiral titanium cluster (SCTC) catalyst by the controlled hydrolysis of a preformed chiral titanium-alkoxide complex. The isolated SCTC catalysts were remarkably stable and showed up to 98 % enantioselectivity (ee) with complete conversion of the imine within 2 h for a wide variety of imines at room temperature. The heterogeneous catalysts were recyclable more than 10 times without any loss in activity or selectivity. The robustness, high performance, and recyclability of the catalyst enabled it to be used in a packed-bed reactor to carry out the cyanation under continuous flow. Up to 97 % ee and quantitative conversion with a throughput of 45 mg h(-1) were achieved under optimized flow conditions at room temperature in the case of benzhydryl imine. Furthermore, a three-component Strecker reaction was performed under continuous flow by using the corresponding aldehydes and amines instead of the preformed imines. A good product distribution was obtained for the formation of amino nitriles with ee values of up to 98 %. Synthetically useful ee values were also obtained for challenging α-branched aliphatic aldehyde by using the three-component continuous Strecker reaction. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. Offshore code comparison collaboration continuation (OC4), phase I - Results of coupled simulations of an offshore wind turbine with jacket support structure

    DEFF Research Database (Denmark)

    Popko, Wojciech; Vorpahl, Fabian; Zuga, Adam

    2012-01-01

    In this paper, the exemplary results of the IEA Wind Task 30 "Offshore Code Comparison Collaboration Continuation" (OC4) Project - Phase I, focused on the coupled simulation of an offshore wind turbine (OWT) with a jacket support structure, are presented. The focus of this task has been the verif...... such as the buoyancy calculation and methods of accounting for additional masses (such as hydrodynamic added mass). Finally, recommendations concerning the modeling of the jacket are given. Copyright © 2012 by the International Society of Offshore and Polar Engineers (ISOPE)....

  16. Tested Demonstrations.

    Science.gov (United States)

    Gilbert, George L.

    1990-01-01

    Included are three demonstrations that include the phase change of ice when under pressure, viscoelasticity and colloid systems, and flame tests for metal ions. The materials, procedures, probable results, and applications to real life situations are included. (KR)

  17. Tested Demonstrations.

    Science.gov (United States)

    Gilbert, George L., Ed.

    1980-01-01

    Presented is a Corridor Demonstration which can be set up in readily accessible areas such as hallways or lobbies. Equipment is listed for a display of three cells (solar cells, fuel cells, and storage cells) which develop electrical energy. (CS)

  18. Tested Demonstrations.

    Science.gov (United States)

    Gilbert, George L., Ed.

    1987-01-01

    Presents three demonstrations suitable for undergraduate chemistry classes. Focuses on experiments with calcium carbide, the induction by iron of the oxidation of iodide by dichromate, and the classical iodine clock reaction. (ML)

  19. Understanding exercise uptake and adherence for people with chronic conditions: a new model demonstrating the importance of exercise identity, benefits of attending and support.

    Science.gov (United States)

    Pentecost, C; Taket, A

    2011-10-01

    Understanding the factors influencing uptake and adherence to exercise for people with chronic conditions from different ages, genders and ethnicities is important for planning exercise services. This paper presents evidence supporting a new model of exercise uptake and adherence applicable to people with chronic conditions from diverse socio-demographic backgrounds. The study is based on 130 semi-structured interviews with people with chronic conditions, including both those who did and those who did not attend exercise services, and supporters of those who attended. Analysis followed the guidelines of 'framework analysis'. Results show that three factors were particularly important in influencing adherence behavior: (i) exercise identity, (ii) support and (iii) perceived benefits of attending. Social and cultural identities impacted on willingness to exercise, importance of exercise and perceived appropriateness of exercising. Having at least one supporter providing different types of support was associated with high levels of attendance. Those people who valued the social and psychological benefits of attending were more likely to be high attenders. The new model illustrates interaction between these three factors and discusses how these can be taken into account when planning exercise services for people with chronic conditions drawn from diverse socio-demographic groups.

  20. Tested Demonstrations.

    Science.gov (United States)

    Gilbert, George L., Ed.

    1987-01-01

    Describes two demonstrations to illustrate characteristics of substances. Outlines a method to detect the changes in pH levels during the electrolysis of water. Uses water pistols, one filled with methane gas and the other filled with water, to illustrate the differences in these two substances. (TW)

  1. ISSUES AND FEASIBILITY DEMONSTRATION OF CLIC SUPPORTING SYSTEM CHAIN ACTIVE PRE-ALIGNMENT USING A MULTI-MODULE TEST SETUP (MOCK-UP)

    CERN Document Server

    Sosin, Mateusz

    2016-01-01

    The implementation study of the CLIC (Compact LInear Collider) is under way at CERN with a focus on the challenging issues. The pre-alignment precision and accuracy requirements are part of these technical challenges: the permissible transverse position errors of the linac components are typically 14 micrometers over sliding windows of 200m. To validate the proposed methods and strategies, the Large Scale Metrology section at CERN has performed campaigns of measurements on the CLIC Two Beam Test Modules, focusing inter alia on the alignment performance of the CLIC “snake”- girders configuration and the Main Beam Quadrupoles supporting structures. This paper describes the activities and results of tests which were performed on the test mock-up for the qualification of the CLIC supporting system chain for active pre-alignment. The lessons learnt (“know how”), the issues encountered in the girder position determination as well as the behaviour of the mechanical components are presented.

  2. Pilot's Automated Weather Support System (PAWSS) concepts demonstration project. Phase 1: Pilot's weather information requirements and implications for weather data systems design

    Science.gov (United States)

    Crabill, Norman L.; Dash, Ernie R.

    1991-01-01

    The weather information requirements for pilots and the deficiencies of the current aviation weather support system in meeting these requirements are defined. As the amount of data available to pilots increases significantly in the near future, expert system technology will be needed to assist pilots in assimilating that information. Some other desirable characteristics of an automation-assisted system for weather data acquisition, dissemination, and assimilation are also described.

  3. Continuous-flow left ventricular assist device support in patients with advanced heart failure: points of interest for the daily management.

    Science.gov (United States)

    Felix, S E A; Martina, J R; Kirkels, J H; Klöpping, C; Nathoe, H; Sukkel, E; Hulstein, N; Ramjankhan, F Z; Doevendans, P A F M; Lahpor, J R; de Jonge, Nicholaas

    2012-04-01

    Today, continuous-flow left ventricular assist devices (cf-LVADs) are implanted more often in patients with end-stage heart failure. Because of greater durability they can be implanted for an extended period of time. As a result of increased numbers of patients on cf-LVAD support, healthcare professionals should be aware of the potential complications inherent to this therapy. Both bleeding and thrombosis may occur, and also complications related either to the device itself or to the ensuing altered haemodynamics, valvular pathology, and rhythm disturbances such as ventricular tachycardias and fibrillation. Accurate clinical evaluation, together with an electrocardiogram and, if necessary, combined with an echocardiogram, is obligatory in these situations. This review summarizes common complications complemented by a few clinical cases.

  4. ICT Demonstration

    DEFF Research Database (Denmark)

    Jensen, Tine Wirenfeldt; Bay, Gina

    the consequences students can expect if they do plagiarize. The second section presents the basic tools for ensuring academic integrity by introducing the basic concepts necessary to avoid plagiarism: quotations, in-text citations and summarizing. A quiz allows students to test their knowledge about plagiarism......., and the designer of the Study Metro shares an educational developer’s perspective on the concept of plagiarism in a podcast in ‘Stop Plagiarism’. Both learning resources reflect a holistic understanding of the academic learning process which views finding information, handling sources, choosing a topic......, formulating a research problem as well as writing techniques as deeply integrated elements of the academic work process. The importance of creating an engaging and supportive learning environment: When teaching subjects such as plagiarism and study skills, the student can easily be constructed as a cheater...

  5. From the Lindlar catalyst to supported ligand-modified palladium nanoparticles: selectivity patterns and accessibility constraints in the continuous-flow three-phase hydrogenation of acetylenic compounds.

    Science.gov (United States)

    Vilé, Gianvito; Almora-Barrios, Neyvis; Mitchell, Sharon; López, Núria; Pérez-Ramírez, Javier

    2014-05-12

    Site modification and isolation through selective poisoning comprise an effective strategy to enhance the selectivity of palladium catalysts in the partial hydrogenation of triple bonds in acetylenic compounds. The recent emergence of supported hybrid materials matching the stereo- and chemoselectivity of the classical Lindlar catalyst holds promise to revolutionize palladium-catalyzed hydrogenations, and will benefit from an in-depth understanding of these new materials. In this work, we compare the performance of bare, lead-poisoned, and ligand-modified palladium catalysts in the hydrogenation of diverse alkynes. Catalytic tests, conducted in a continuous-flow three-phase reactor, coupled with theoretical calculations and characterization methods, enable elucidation of the structural origins of the observed selectivity patterns. Distinctions in the catalytic performance are correlated with the relative accessibility of the active site to the organic substrate, and with the adsorption configuration and strength, depending on the ensemble size and surface potentials. This explains the role of the ligand in the colloidally prepared catalysts in promoting superior performance in the hydrogenation of terminal and internal alkynes, and short-chain alkynols. In contrast, the greater accessibility of the active surface of the Pd-Pb alloy and the absence of polar groups are shown to be favorable in the conversion of alkynes containing long aliphatic chains and/or ketone groups. These findings provide detailed insights for the advanced design of supported nanostructured catalysts.

  6. Better Ira Remsen Demonstration

    Science.gov (United States)

    Dalby, David K.; Maynard, James H.; Moore, John W.

    2011-01-01

    Many versions of the classic Ira Remsen experience involving copper and concentrated nitric acid have been used as lecture demonstrations. Remsen's original reminiscence from 150 years ago is included in the Supporting Information, and his biography can be found on the Internet. This article presents a new version that makes the demonstration more…

  7. Issues and Feasibility Demonstration of Positioning Closed Loop Control for the CLIC Supporting System Using a Test Mock-up with Five Degrees of Freedom

    CERN Document Server

    Sosin, M; Chritin, N; Griffet, S; Kemppinen, J; Mainaud Durand, H; Rude, V; Sterbini, G

    2012-01-01

    Since several years, CERN is studying the feasibility of building a high energy e+ e- linear collider: the CLIC (Compact LInear Collider). One of the challenges of such a collider is the pre-alignment precision and accuracy requirement on the transverse positions of the linac components, which is typically 14 μm over a window of 200 m. To ensure the possibility of positioning within such tight constraints, CERN Beams Department’s Survey team has worked intensively at developing the methods and technology needed to achieve that objective. This paper describes activities which were performed on a test bench (mock-up) with five degrees of freedom (DOF) for the qualification of control algorithms for the CLIC supporting system active-pre-alignment. Present understanding, lessons learned (“know how”), issues of sensors noise and mechanical components nonlinearities are presented.

  8. Persistent blood stream infection in patients supported with a continuous-flow left ventricular assist device is associated with an increased risk of cerebrovascular accidents.

    Science.gov (United States)

    Trachtenberg, Barry H; Cordero-Reyes, Andrea M; Aldeiri, Molham; Alvarez, Paulino; Bhimaraj, Arvind; Ashrith, Guha; Elias, Barbara; Suarez, Erik E; Bruckner, Brian; Loebe, Matthias; Harris, Richard L; Zhang, J Yi; Torre-Amione, Guillermo; Estep, Jerry D

    2015-02-01

    Common adverse events in patients supported with Continuous-flow left ventricular assist devices (CF-LVAD) include infections and cerebrovascular accidents (CVA). Some studies have suggested a possible association between blood stream infection (BSI) and CVA. Medical records of patients who received Heartmate II (HMII) CF-LVADs in 2008-2012 at a single center were reviewed. CVA was categorized as either hemorrhagic (HCVA) or ischemic (ICVA). BSI was divided into persistent (pBSI) and nonpersistent (non-pBSI). pBSI was defined as BSI with the same organism on repeated blood culture >72 hours from initial blood culture despite antibiotics. Univariate and multivariate analyses were performed to determine predictors. A total of 149 patients had HMII implanted; 76% were male, and the overall mean age was 55.4 ± 13 years. There were a total of 19 (13%) patients who had CVA (7 HCVA and 12 ICVA) at a median of 295 days (range 5-1,096 days) after implantation. There were a total of 28 (19%) patients with pBSI and 17 (11%) patients with non-pBSI. Patients with pBSI had a trend toward greater BMI (31 kg/m(2) vs 27 kg/m(2); P = .09), and longer duration of support (1,019 d vs 371 d; P CVA on multivariate analysis (odds ratio [OR] 5.97; P = .003) as well as persistent Pseudomonas aeruginosa infection (OR 4.54; P = .048). Persistent BSI is not uncommon in patients supported by CF-LVAD and is highly associated with all-cause CVA and increased all-cause mortality. Copyright © 2015 Elsevier Inc. All rights reserved.

  9. Complete abdominal aortic aneurysm thrombosis and obstruction of both common iliac arteries with intrathrombotic pressures demonstrating a continuing risk of rupture: a case report and review of the literature

    Directory of Open Access Journals (Sweden)

    Kotzadimitriou Aikaterini

    2009-01-01

    Full Text Available Abstract Introduction Although mural thrombus in an abdominal aortic aneurysm is frequent and its role has been studied extensively, complete thrombosis of an abdominal aneurysm is extremely rare and its natural history in relation to the risk of rupture is not known. The case of a patient with a completely thrombosed infrarenal aneurysm is presented along with a literature review. Case presentation We report the case of a 56-year-old Caucasian man with an infrarenal abdominal aortic aneurysm, presenting at our hospital due to critical ischemia of his right lower limb. Computed tomography and angiography demonstrated complete aneurysm thrombosis and obstruction of both common iliac arteries. Conclusion During the operation, systolic and mean intrathrombotic pressures, measured in different levels, constituted 74.5-90.2% and 77.5-92.5% of systolic and mean intraluminal pressure and 73-88.4% and 76.5-91.3% of systemic pressure, respectively. Our findings show that there may be a continuing risk of rupture in cases of a thrombosed abdominal aortic aneurysm.

  10. GASIS demonstration

    Energy Technology Data Exchange (ETDEWEB)

    Vidas, E.H. [Energy and Environmental Analysis, Inc., Arlington, VA (United States)

    1995-04-01

    A prototype of the GASIS database and retrieval software has been developed and is the subject of this poster session and computer demonstration. The prototype consists of test or preliminary versions of the GASIS Reservoir Data System and Source Directory datasets and the software for query and retrieval. The prototype reservoir database covers the Rocky Mountain region and contains the full GASIS data matrix (all GASIS data elements) that will eventually be included on the CD-ROM. It is populated for development purposes primarily by the information included in the Rocky Mountain Gas Atlas. The software has been developed specifically for GASIS using Foxpro for Windows. The application is an executable file that does not require Foxpro to run. The reservoir database software includes query and retrieval, screen display, report generation, and data export functions. Basic queries by state, basin, or field name will be assisted by scrolling selection lists. A detailed query screen will allow record selection on the basis of any data field, such as depth, cumulative production, or geological age. Logical operators can be applied to any-numeric data element or combination of elements. Screen display includes a {open_quotes}browse{close_quotes} display with one record per row and a detailed single record display. Datasets can be exported in standard formats for manipulation with other software packages. The Source Directory software will allow record retrieval by database type or subject area.

  11. Detailed workplan for innovative technology demonstrations to support existing treatment operations at the Installation Logistics Center, DSERTS Site FTLE-33, Fort Lewis, Washington

    Energy Technology Data Exchange (ETDEWEB)

    Liikala, T.L.

    1998-07-01

    This workplan is an assemblage of documents for use by Pacific Northwest National Laboratory (PNNL) to direct and control project activities at Fort Lewis, Washington. Fort Lewis is a FORSCOM installation, whose Logistics Center (DSERTS Site FTLE-33) was placed on the National priorities List (NPL) in December 1989, as a result of trichloroethene (TCE) contamination in groundwater beneath the site. Site background information and brief descriptions of the Fort Lewis project and the main supporting documents, which will be used to direct and control the project activities, are provided. These are followed by a summary of the Work Breakdown Structure (WBS) elements, a general project schedule, a list of major deliverables, and a budget synopsis. Test plans for specific elements (Bench-Scale Testing) will be developed separately as those elements are initiated. If additional activities not specifically addressed in the Project Management Plan (Attachment 1) are added to the work scope, addendums to this workplan will be prepared to cover those activities.

  12. LAB-SCALE DEMONSTRATION OF PLUTONIUM PURIFICATION BY ANION EXCHANGE, PLUTONIUM (IV) OXALATE PRECIPITATION, AND CALCINATION TO PLUTONIUM OXIDE TO SUPPORT THE MOX FEED MISSION

    Energy Technology Data Exchange (ETDEWEB)

    Crowder, M.; Pierce, R.

    2012-08-22

    presence of oxalate by thermogravimetric analysis-mass spectrometry (TGA-MS). To use the TGA-MS for carbon or oxalate content, some method development will be required. However, the TGA-MS is already used for moisture measurements. Therefore, SRNL initiated method development for the TGA-MS to allow quantification of oxalate or total carbon. That work continues at this time and is not yet ready for use in this study. However, the collected test data can be reviewed later as those analysis tools are available.

  13. Plate Boundary Observatory East Region Update and Status: Supporting New Science Through Enhanced Telemetry, Monument Evaluation, and Continued Operations and Maintenance

    Science.gov (United States)

    Dittmann, S. T.

    2012-12-01

    The EarthScope Plate Boundary Observatory (PBO) - East Region consists of 280 continuously operating GPS sites in a region that extends from the western border of California to the East Coast of the U.S. We present a number of highlights from the operations and maintenance (O&M) of the network in FY2012. One goal for 2012 was to replace poorly performing stations and another was to fill in some of the gaps in the eastern region of PBO. Accordingly, new GPS sites were installed at several locations across the mid-west, including in Wisconsin and South Dakota. CAYU, a GPS station at Cayuga College, New York also was incorporated into the PBO data flow to replace the poorly performing PBO station, LOZ1. UNAVCO now manages over 20 PBO GPS stations east of the Rocky Mountains, including 2 GPS stations installed in November 2011 as part of an NSF-funded RAPID project to the study of the post-rupture crustal relaxation resulting from the M5.8 Mineral, VA earthquake. PBO engineers also are constructing two additional monuments at five existing PBO sites to compare the performance of different monument types in different geological and tectonic settings. In addition, PBO engineers are upgrading GPS stations in Colorado and New Mexico, which comprise the semi-permanent Rio Grande Rift GPS network, and which have been downloaded manually for over 6 years, to cellular data communications. Lastly, engineers from the PBO-East region continued to support special projects from EarthScope-funded PIs, including Dr. Kristine Larson, who is advancing the use of GPS multipath observations to estimate snow depth (PBO H20) and vegetation growth. In summary, the PBO East Region sub-network state of health remained consistently above 97% throughout 2012, a testament to network hardening completed during the last three years of PBO O&M.

  14. Preoperative Proteinuria and Reduced Glomerular Filtration Rate Predicts Renal Replacement Therapy in Patients Supported With Continuous-Flow Left Ventricular Assist Devices.

    Science.gov (United States)

    Topkara, Veli K; Coromilas, Ellie J; Garan, Arthur Reshad; Li, Randall C; Castagna, Francesco; Jennings, Douglas L; Yuzefpolskaya, Melana; Takeda, Koji; Takayama, Hiroo; Sladen, Robert N; Mancini, Donna M; Naka, Yoshifumi; Radhakrishnan, Jai; Colombo, Paolo C

    2016-12-01

    Renal failure requiring renal replacement therapy (RRT) has detrimental effects on quality of life and survival of patients with continuous-flow left ventricular assist devices (CF-LVADs). Current guidelines do not offer a decision-making algorithm for CF-LVAD candidates with poor baseline renal function. Objective of this study was to identify risk factors associated with RRT after CF-LVAD implantation. Three hundred and eighty-nine consecutive patients underwent contemporary CF-LVAD implantation at the Columbia University Medical Center between January 2004 and August 2015. Baseline demographics, comorbid conditions, clinical risk scores, and renal function were analyzed in patients with or without RRT after CF-LVAD implantation. Time-dependent receiver-operating characteristic curve analysis was performed to define optimal cutoffs for continuous risk factors. Forty-four patients (11.6%) required RRT during a median follow-up of 9.9 months. Patients requiring RRT had significantly worse renal function, lower hemoglobin, and increased proteinuria at baseline. Low estimated glomerular filtration rate (proteinuria (urine protein to creatinine ratio ≥0.55 mg/mg) were significant predictors of RRT after CF-LVAD support. Dipstick proteinuria was also a significant predictor of RRT after CF-LVAD implantation. Patients with both low estimated glomerular filtration rate and proteinuria had highest risk of RRT (63.6%) compared with those with either low estimated glomerular filtration rate or proteinuria (18.7%) and those with neither of these risk factors (2.7%) at 1-year follow-up (log-rank Pproteinuria are predictors RRT after CF-LVAD implantation and should be routinely assessed in CF-LVAD candidates to guide decision making. © 2016 American Heart Association, Inc.

  15. COMPARISONS OF THE FINITE-ELEMENT-WITH-DISCONTIGUOUS-SUPPORT METHOD TO CONTINUOUS-ENERGY MONTE CARLO FOR PIN-CELL PROBLEMS

    Energy Technology Data Exchange (ETDEWEB)

    A. T. Till; M. Hanuš; J. Lou; J. E. Morel; M. L. Adams

    2016-05-01

    The standard multigroup (MG) method for energy discretization of the transport equation can be sensitive to approximations in the weighting spectrum chosen for cross-section averaging. As a result, MG often inaccurately treats important phenomena such as self-shielding variations across a material. From a finite-element viewpoint, MG uses a single fixed basis function (the pre-selected spectrum) within each group, with no mechanism to adapt to local solution behavior. In this work, we introduce the Finite-Element-with-Discontiguous-Support (FEDS) method, whose only approximation with respect to energy is that the angular flux is a linear combination of unknowns multiplied by basis functions. A basis function is non-zero only in the discontiguous set of energy intervals associated with its energy element. Discontiguous energy elements are generalizations of bands and are determined by minimizing a norm of the difference between snapshot spectra and their averages over the energy elements. We begin by presenting the theory of the FEDS method. We then compare to continuous-energy Monte Carlo for one-dimensional slab and two-dimensional pin-cell problem. We find FEDS to be accurate and efficient at producing quantities of interest such as reaction rates and eigenvalues. Results show that FEDS converges at a rate that is approximately first-order in the number of energy elements and that FEDS is less sensitive to weighting spectrum than standard MG.

  16. Neutron radiation embrittlement studies in support of continued operation, and validation by sampling of Magnox reactor steel pressure vessels and components

    Energy Technology Data Exchange (ETDEWEB)

    Jones, R.B.; Bolton, C.J. [Magnox Electric plc, Berkeley Centre, Glos (United Kingdom)

    1997-02-01

    Magnox steel reactor pressure vessels differ significantly from US LWR vessels in terms of the type of steel used, as well as their operating environment (dose level, exposure temperature range, and neutron spectra). The large diameter ferritic steel vessels are constructed from C-Mn steel plates and forgings joined together with manual metal and submerged-arc welds which are stress-relieved. All Magnox vessels are now at least thirty years old and their continued operation is being vigorously pursued. Vessel surveillance and other programmes are summarized which support this objective. The current understanding of the roles of matrix irradiation damage, irradiation-enhanced copper impurity precipitation and intergranular embrittlement effects is described in so far as these influence the form of the embrittlement and hardening trend curves for each material. An update is given on the influence of high temperature exposure, and on the role of differing neutron spectra. Finally, the validation offered by the results of an initial vessel sampling exercise is summarized together with the objectives of a more extensive future sampling programme.

  17. A fast-initiating ionically tagged ruthenium complex: a robust supported pre-catalyst for batch-process and continuous-flow olefin metathesis.

    Science.gov (United States)

    Borré, Etienne; Rouen, Mathieu; Laurent, Isabelle; Magrez, Magaly; Caijo, Fréderic; Crévisy, Christophe; Solodenko, Wladimir; Toupet, Loic; Frankfurter, René; Vogt, Carla; Kirschning, Andreas; Mauduit, Marc

    2012-12-14

    In this study, a new pyridinium-tagged Ru complex was designed and anchored onto sulfonated silica, thereby forming a robust and highly active supported olefin-metathesis pre-catalyst for applications under batch and continuous-flow conditions. The involvement of an oxazine-benzylidene ligand allowed the reactivity of the formed Ru pre-catalyst to be efficiently controlled through both steric and electronic activation. The oxazine scaffold facilitated the introduction of the pyridinium tag, thereby affording the corresponding cationic pre-catalyst in good yield. Excellent activities in ring-closing (RCM), cross (CM), and enyne metathesis were observed with only 0.5 mol % loading of the pre-catalyst. When this powerful pre-catalyst was immobilized onto a silica-based cationic-exchange resin, a versatile catalytically active material for batch reactions was generated that also served as fixed-bed material for flow reactors. This system could be reused at 1 mol % loading to afford metathesis products in high purity with very low ruthenium contamination under batch conditions (below 5 ppm). Scavenging procedures for both batch and flow processes were conducted, which led to a lowering of the ruthenium content to as little as one tenth of the original values.

  18. Multi-objective Numeric Association Rules Mining via Ant Colony Optimization for Continuous Domains without Specifying Minimum Support and Minimum Confidence

    Directory of Open Access Journals (Sweden)

    Parisa Moslehi

    2011-09-01

    Full Text Available Currently, all search algorithms which use discretization of numeric attributes for numeric association rule mining, work in the way that the original distribution of the numeric attributes will be lost. This issue leads to loss of information, so that the association rules which are generated through this process are not precise and accurate. Based on this fact, algorithms which can natively handle numeric attributes would be interesting. Since association rule mining can be considered as a multi-objective problem, rather than a single objective one, a new multi-objective algorithm for numeric association rule mining is presented in this paper, using Ant Colony Optimization for Continuous domains (ACOR. This algorithm mines numeric association rules without any need to specify minimum support and minimum confidence, in one step. In order to do this we modified ACOR for generating rules. The results show that we have more precise and accurate rules after applying this algorithm and the number of rules is more than the ones resulted from previous works.

  19. Continuation calculus

    Directory of Open Access Journals (Sweden)

    Bram Geron

    2013-09-01

    Full Text Available Programs with control are usually modeled using lambda calculus extended with control operators. Instead of modifying lambda calculus, we consider a different model of computation. We introduce continuation calculus, or CC, a deterministic model of computation that is evaluated using only head reduction, and argue that it is suitable for modeling programs with control. It is demonstrated how to define programs, specify them, and prove them correct. This is shown in detail by presenting in CC a list multiplication program that prematurely returns when it encounters a zero. The correctness proof includes termination of the program. In continuation calculus we can model both call-by-name and call-by-value. In addition, call-by-name functions can be applied to call-by-value results, and conversely.

  20. Education Payload Operation - Demonstrations

    Science.gov (United States)

    Keil, Matthew

    2009-01-01

    Education Payload Operation - Demonstrations (EPO-Demos) are recorded video education demonstrations performed on the International Space Station (ISS) by crewmembers using hardware already onboard the ISS. EPO-Demos are videotaped, edited, and used to enhance existing NASA education resources and programs for educators and students in grades K-12. EPO-Demos are designed to support the NASA mission to inspire the next generation of explorers.

  1. Building a global business continuity programme.

    Science.gov (United States)

    Lazcano, Michael

    2014-01-01

    Business continuity programmes provide an important function within organisations, especially when aligned with and supportive of the organisation's goals, objectives and organisational culture. Continuity programmes for large, complex international organisations, unlike those for compact national companies, are more difficult to design, build, implement and maintain. Programmes for international organisations require attention to structural design, support across organisational leadership and hierarchy, seamless integration with the organisation's culture, measured success and demonstrated value. This paper details practical, but sometimes overlooked considerations for building successful global business continuity programmes.

  2. Continued Follow-Up of Phambili Phase 2b Randomized HIV-1 Vaccine Trial Participants Supports Increased HIV-1 Acquisition among Vaccinated Men.

    Directory of Open Access Journals (Sweden)

    Zoe Moodie

    Full Text Available The Phase 2b double-blinded, randomized Phambili/HVTN 503 trial evaluated safety and efficacy of the MRK Ad5 gag/pol/nef subtype B HIV-1 preventive vaccine vs placebo in sexually active HIV-1 seronegative participants in South Africa. Enrollment and vaccinations stopped and participants were unblinded but continued follow-up when the Step study evaluating the same vaccine in the Americas, Caribbean, and Australia was unblinded for non-efficacy. Final Phambili analyses found more HIV-1 infections amongst vaccine than placebo recipients, impelling the HVTN 503-S recall study.HVTN 503-S sought to enroll all 695 HIV-1 uninfected Phambili participants, provide HIV testing, risk reduction counseling, physical examination, risk behavior assessment and treatment assignment recall. After adding HVTN 503-S data, HIV-1 infection hazard ratios (HR vaccine vs. placebo were estimated by Cox models.Of the 695 eligible, 465 (67% enrolled with 230 from the vaccine group and 235 from the placebo group. 38% of the 184 Phambili dropouts were enrolled. Enrollment did not differ by treatment group, gender, or baseline HSV-2. With the additional 1286 person years of 503-S follow-up, the estimated HR over Phambili and HVTN 503-S follow-up was 1.52 (95% CI 1.08-2.15, p = 0.02, 82 vaccine/54 placebo infections. The HR was significant for men (HR = 2.75, 95% CI 1.49, 5.06, p = 0.001 but not for women (HR = 1.12, 95% CI 0.73, 1.72, p = 0.62.The additional follow-up from HVTN 503-S supported the Phambili finding of increased HIV-1 acquisition among vaccinated men and strengthened the evidence of lack of vaccine effect among women.clinicaltrials.gov NCT00413725 SA National Health Research Database DOH-27-0207-1539.

  3. The application of continuous wavelet transform and least squares support vector machine for the simultaneous quantitative spectrophotometric determination of Myricetin, Kaempferol and Quercetin as flavonoids in pharmaceutical plants.

    Science.gov (United States)

    Sohrabi, Mahmoud Reza; Darabi, Golnaz

    2016-01-05

    Flavonoids are γ-benzopyrone derivatives, which are highly regarded in these researchers for their antioxidant property. In this study, two new signals processing methods been coupled with UV spectroscopy for spectral resolution and simultaneous quantitative determination of Myricetin, Kaempferol and Quercetin as flavonoids in Laurel, St. John's Wort and Green Tea without the need for any previous separation procedure. The developed methods are continuous wavelet transform (CWT) and least squares support vector machine (LS-SVM) methods integrated with UV spectroscopy individually. Different wavelet families were tested by CWT method and finally the Daubechies wavelet family (Db4) for Myricetin and the Gaussian wavelet families for Kaempferol (Gaus3) and Quercetin (Gaus7) were selected and applied for simultaneous analysis under the optimal conditions. The LS-SVM was applied to build the flavonoids prediction model based on absorption spectra. The root mean square errors for prediction (RMSEP) of Myricetin, Kaempferol and Quercetin were 0.0552, 0.0275 and 0.0374, respectively. The developed methods were validated by the analysis of the various synthetic mixtures associated with a well- known flavonoid contents. Mean recovery values of Myricetin, Kaempferol and Quercetin, in CWT method were 100.123, 100.253, 100.439 and in LS-SVM method were 99.94, 99.81 and 99.682, respectively. The results achieved by analyzing the real samples from the CWT and LS-SVM methods were compared to the HPLC reference method and the results were very close to the reference method. Meanwhile, the obtained results of the one-way ANOVA (analysis of variance) test revealed that there was no significant difference between the suggested methods.

  4. The application of continuous wavelet transform and least squares support vector machine for the simultaneous quantitative spectrophotometric determination of Myricetin, Kaempferol and Quercetin as flavonoids in pharmaceutical plants

    Science.gov (United States)

    Sohrabi, Mahmoud Reza; Darabi, Golnaz

    2016-01-01

    Flavonoids are γ-benzopyrone derivatives, which are highly regarded in these researchers for their antioxidant property. In this study, two new signals processing methods been coupled with UV spectroscopy for spectral resolution and simultaneous quantitative determination of Myricetin, Kaempferol and Quercetin as flavonoids in Laurel, St. John's Wort and Green Tea without the need for any previous separation procedure. The developed methods are continuous wavelet transform (CWT) and least squares support vector machine (LS-SVM) methods integrated with UV spectroscopy individually. Different wavelet families were tested by CWT method and finally the Daubechies wavelet family (Db4) for Myricetin and the Gaussian wavelet families for Kaempferol (Gaus3) and Quercetin (Gaus7) were selected and applied for simultaneous analysis under the optimal conditions. The LS-SVM was applied to build the flavonoids prediction model based on absorption spectra. The root mean square errors for prediction (RMSEP) of Myricetin, Kaempferol and Quercetin were 0.0552, 0.0275 and 0.0374, respectively. The developed methods were validated by the analysis of the various synthetic mixtures associated with a well- known flavonoid contents. Mean recovery values of Myricetin, Kaempferol and Quercetin, in CWT method were 100.123, 100.253, 100.439 and in LS-SVM method were 99.94, 99.81 and 99.682, respectively. The results achieved by analyzing the real samples from the CWT and LS-SVM methods were compared to the HPLC reference method and the results were very close to the reference method. Meanwhile, the obtained results of the one-way ANOVA (analysis of variance) test revealed that there was no significant difference between the suggested methods.

  5. Support of NASA ADR/ Cross-Enterprise NRA Advanced Adiabatic Demagnetization Refrigerators for Continuous Cooling from 10K to 50mK, Development of a Heat Switch

    Science.gov (United States)

    Richards, Paul L.

    2005-01-01

    Mechanical heat switches are used in conjunction with sorption refrigerators, adiabatic demagnetization refrigerators and for other cryogenic tasks including the pre-cooling cryogenic systems. They use a mechanical actuator which closes Au plated Cu jaws on an Au plated Cu bar. The thermal conductance in the closed position is essentially independent of the area of the jaws and proportional to the force applied. It varies linearly with T. It is approximately 10mW/K for 200 N at 1.5K. In some applications, the heat switch can be driven from outside the cryostat by a rotating rod and a screw. Such heat switches are available commercially from several sources. In other applications, including systems for space, it is desirable to drive the switch using a cold linear motor, or solenoid. Superconducting windings are used at temperatures s 4.2K to minimize power dissipation, but are not appropriate for pre-cooling a system at higher temperatures. This project was intended to improve the design of solenoid activated mechanical heat switches and to provide such switches as required to support the development of Advanced Adiabatic Demagnetization Refrigerators for Continuous Cooling from 10 K to 50 mK at GSFC. By the time funding began in 5/1/01, the immediate need for mechanical heat switches at GSFC had subsided but, at the same time, the opportunity had arisen to improve the design of mechanical heat switching by incorporating a "latching solenoid". In this device, the solenoid current is required only for changing the state of the switch and not during the whole time that the switch is closed.

  6. Long-term, repeated dose in vitro neurotoxicity of the glutamate receptor antagonist L-AP3, demonstrated in rat hippocampal slice cultures by using continuous propidium iodide incubation

    DEFF Research Database (Denmark)

    Kristensen, Bjarne W; Blaabjerg, Morten; Noraberg, Jens

    2007-01-01

    ), which is known to be toxic in vivo after subchronic, but not acute, administration. Degenerative effects were monitored by measuring the cellular uptake of propidium iodide (PI; continuously present in the medium) and lactate dehydrogenase (LDH) leakage, and by using a panel of histological stains...

  7. Gigashot Optical Laser Demonstrator

    Energy Technology Data Exchange (ETDEWEB)

    Deri, R. J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2015-10-13

    The Gigashot Optical Laser Demonstrator (GOLD) project has demonstrated a novel optical amplifier for high energy pulsed lasers operating at high repetition rates. The amplifier stores enough pump energy to support >10 J of laser output, and employs conduction cooling for thermal management to avoid the need for expensive and bulky high-pressure helium subsystems. A prototype amplifier was fabricated, pumped with diode light at 885 nm, and characterized. Experimental results show that the amplifier provides sufficient small-signal gain and sufficiently low wavefront and birefringence impairments to prove useful in laser systems, at repetition rates up to 60 Hz.

  8. Long-term, repeated dose in vitro neurotoxicity of the glutamate receptor antagonist L-AP3, demonstrated in rat hippocampal slice cultures by using continuous propidium iodide incubation

    DEFF Research Database (Denmark)

    Kristensen, Bjarne W; Blaabjerg, Morten; Noraberg, Jens

    2007-01-01

    Most in vitro models are only used to assess short-term effects of test compounds. However, as demonstrated here, hippocampal slice cultures can be used for long-term studies. The test compound used was the metabotropic glutamate receptor antagonist, L(+)-2-amino-3-phosphonopropionic acid (L-AP3...

  9. Continuous auditing & continuous monitoring : Continuous value?

    NARCIS (Netherlands)

    van Hillo, Rutger; Weigand, Hans; Espana, S; Ralyte, J; Souveyet, C

    2016-01-01

    Advancements in information technology, new laws and regulations and rapidly changing business conditions have led to a need for more timely and ongoing assurance with effectively working controls. Continuous Auditing (CA) and Continuous Monitoring (CM) technologies have made this possible by obtain

  10. Continuous auditing & continuous monitoring : Continuous value?

    NARCIS (Netherlands)

    van Hillo, Rutger; Weigand, Hans; Espana, S; Ralyte, J; Souveyet, C

    2016-01-01

    Advancements in information technology, new laws and regulations and rapidly changing business conditions have led to a need for more timely and ongoing assurance with effectively working controls. Continuous Auditing (CA) and Continuous Monitoring (CM) technologies have made this possible by obtain

  11. Continuous auditing & continuous monitoring : Continuous value?

    NARCIS (Netherlands)

    van Hillo, Rutger; Weigand, Hans; Espana, S; Ralyte, J; Souveyet, C

    2016-01-01

    Advancements in information technology, new laws and regulations and rapidly changing business conditions have led to a need for more timely and ongoing assurance with effectively working controls. Continuous Auditing (CA) and Continuous Monitoring (CM) technologies have made this possible by

  12. Nucla CFB Demonstration Project

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-01

    This report documents Colorado-Ute Electric Association's Nucla Circulating Atmospheric Fluidized-Bed Combustion (AFBC) demonstration project. It describes the plant equipment and system design for the first US utility-size circulating AFBC boiler and its support systems. Included are equipment and system descriptions, design/background information and appendices with an equipment list and selected information plus process flow and instrumentation drawings. The purpose of this report is to share the information gathered during the Nucla circulating AFBC demonstration project and present it so that the general public can evaluate the technical feasibility and cost effectiveness of replacing pulverized or stoker-fired boiler units with circulating fluidized-bed boiler units. (VC)

  13. Relation Between Pressure and Volume Unloading During Ramp Testing in Patients Supported with a Continuous-Flow Left Ventricular Assist Device

    DEFF Research Database (Denmark)

    Jung, Mette H; Hassager, Christian; Balling, Louise;

    2015-01-01

    Pulmonary capillary wedge pressure (PCWP) is the key to describing left ventricular (LV) unloading, however, the relation between pressure and the echocardiography-derived surrogate of LV volume (left ventricular end-diastolic diameter (LVEDD)) as a function of pump speed (RPM) in continuous......-flow left ventricular assist device (CF-LVAD) patients is unknown. In this study the pressure-volume relationship as a function of RPM during ramp testing was investigated by simultaneously measuring PCWP by Swan-Ganz catheter and LVEDD by echocardiography. The ramp protocol started at usual pump setting...

  14. The Continued Need for USAF Light Attack post OEF/OIF: A Survey of West African Infrastructure to Support Tactical Air Operations

    Science.gov (United States)

    2013-04-01

    16 Figure5: Algeria ….…………………………………………………………………………18 Abstract As the USAF transitions to post-OIF/OEF operations there is a continued...Since then AQIM’s area of operation has expanded beyond Algeria to include Mali, Mauritania, Tunisia and Morocco.5 AQIM also operates along the...western boarder of Niger and may have links there to the local Tuareg group Mouvement des Nigerians pour la Justice.6 In 2010 AQIM announced its

  15. The Care management Information system for the home Care Network (SI GESCAD): support for care coordination and continuity of care in the Brazilian Unified health system (SUS).

    Science.gov (United States)

    Pires, Maria Raquel Gomes Maia; Gottems, Leila Bernarda Donato; Vasconcelos Filho, José Eurico; Silva, Kênia Lara; Gamarski, Ricardo

    2015-06-01

    The present article describes the development of the initial version of the Brazilian Care Management Information System for the Home Care Network (SI GESCAD). This system was created to enhance comprehensive care, care coordination and the continuity of care provided to the patients, family and caretakers of the Home Care (HC) program. We also present a reflection on the contributions, limitations and possibilities of the SI GESCAD within the scope of the Home Care Network of the Brazilian Unified Health System (RAS-AD). This was a study on technology production based on a multi-method protocol. It discussed software engineering and human-computer interaction (HCI) based on user-centered design, as well as evolutionary and interactive software process (prototyping and spiral). A functional prototype of the GESCAD was finalized, which allowed for the management of HC to take into consideration the patient's social context, family and caretakers. The system also proved to help in the management of activities of daily living (ADLs), clinical care and the monitoring of variables associated with type 2 HC. The SI GESCAD allowed for a more horizontal work process for HC teams at the RAS-AD/SUS level of care, with positive repercussions on care coordination and continuity of care.

  16. Genome-wide CNV analysis replicates the association between GSTM1 deletion and bladder cancer: a support for using continuous measurement from SNP-array data

    Directory of Open Access Journals (Sweden)

    Marenne Gaëlle

    2012-07-01

    Full Text Available Abstract Background Structural variations such as copy number variants (CNV influence the expression of different phenotypic traits. Algorithms to identify CNVs through SNP-array platforms are available. The ability to evaluate well-characterized CNVs such as GSTM1 (1p13.3 deletion provides an important opportunity to assess their performance. Results 773 cases and 759 controls from the SBC/EPICURO Study were genotyped in the GSTM1 region using TaqMan, Multiplex Ligation-dependent Probe Amplification (MLPA, and Illumina Infinium 1 M SNP-array platforms. CNV callings provided by TaqMan and MLPA were highly concordant and replicated the association between GSTM1 and bladder cancer. This was not the case when CNVs were called using Illumina 1 M data through available algorithms since no deletion was detected across the study samples. In contrast, when the Log R Ratio (LRR was used as a continuous measure for the 5 probes contained in this locus, we were able to detect their association with bladder cancer using simple regression models or more sophisticated methods such as the ones implemented in the CNVtools package. Conclusions This study highlights an important limitation in the CNV calling from SNP-array data in regions of common aberrations and suggests that there may be added advantage for using LRR as a continuous measure in association tests rather than relying on calling algorithms.

  17. Vibrational spectroscopy to support the link between rheology and continuous twin-screw melt granulation on molecular level: A case study.

    Science.gov (United States)

    Monteyne, Tinne; Heeze, Liza; Oldörp, Klaus; Vervaet, Chris; Remon, Jean-Paul; De Beer, Thomas

    2016-06-01

    Twin screw hot melt granulation (TSHMG) is an innovative and continuous drug formulation process allowing granulation of moisture sensitive drugs. However, due to the lack of experience and in-depth process understanding, this technique is not yet widely used. During the TSHMG process, the microstructure of the granules is generated and modified and strongly depends on the flow behavior of the material. Hence, rheology might be a suitable tool to simulate and examine this process. However, chemical interactions of the material are influencing the physical properties leading to the microstructure. In this research project it is spectroscopically investigated whether the heat applied in a rheometer induces the same molecular effects as these occurring during TSHMG of the model formulation caffeine anhydrous/Soluplus®. Hence, it is evaluated whether rheology can be used as a simulation tool to improve the understanding of the material behavior at molecular level during continuous melt granulation. Therefore, in-line Raman spectroscopy is executed during TSHMG and in situ Fourier Transform Infra-red (FTIR) during oscillatory rheological experiments. The results from the in-line Raman monitoring revealed polymorph transition of caffeine anhydrous during twin screw melt granulation with Soluplus® which is stimulated depending on the binder concentration and/or granulation temperature. A correlation was seen between the FTIR spectra obtained during the rheological temperature ramp and the in-line collected Raman spectra during the melt granulation runs. The polymorphic conversion of caffeine anhydrous could be detected in the same temperature range with both techniques, proving the comparability of plate-plate rheometry and hot melt granulation (HMG) for this case with the used parameter settings. Process simulation using rheology combined with in situ FTIR seems a promising approach to increase process understanding and to facilitate binder and parameter selection for

  18. Immobilised lipase on structured supports containing covalently attached ionic liquids for the continuous synthesis of biodiesel in scCO2.

    Science.gov (United States)

    Lozano, Pedro; García-Verdugo, Eduardo; Bernal, Juana M; Izquierdo, Diana F; Burguete, M Isabel; Sánchez-Gómez, Gregorio; Luis, Santiago V

    2012-04-01

    Different nanostructured supports, based on 1-decyl-2-methyimidazolium cations covalently attached to a polystyrene divinylbenzene porous matrix, were used as carriers to immobilise Candida antarctica lipase B. The suitability of these immobilised lipase derivatives for the synthesis of biodiesel (methyl oleate) by the methanolysis of triolein has been tested in both tert-butanol and supercritical (sc)CO(2) (18 MPa, 45 °C) as reaction media. The use of modified supports with low ionic-liquid loading covalently attached to the main polymeric backbone chains provide structured materials that led to the best biodiesel yields (up to 95 %) and operational stability (85 % biodiesel yield after 45 cycles of 8-4 h) in scCO(2) (45 °C, 18 MPa). The presence of tert-butanol as an inert cosolvent in the scCO(2) phase at the same concentration as triolein was key to avoid poisoning the biocatalyst through the blockage of its active sites by the polar byproduct (glycerol) produced in the biodiesel synthesis.

  19. Effects of conventional physiotherapy, continuous positive airway pressure and non-invasive ventilatory support with bilevel positive airway pressure after coronary artery bypass grafting.

    Science.gov (United States)

    Matte, P; Jacquet, L; Van Dyck, M; Goenen, M

    2000-01-01

    Coronary artery bypass graft (CABG) surgery with the use of mammary arteries is associated with severe alteration of lung function parameters. The purpose of the present study was to compare the effect on lung function tests of conventional physiotherapy using incentive spirometry (IS) with non-invasive ventilation on continuous positive airway pressure (CPAP) and with non-invasive ventilation on bilevel positive airway pressure (BiPAP or NIV-2P), METHODS: Ninety-six patients were randomly assigned to 1 of 3 groups: NIV-2P (1 h/3 h), CPAP (1 h/3 h) and IS (20/2 h). Pulmonary function tests and arterial blood gases analyses were obtained before surgery. On the 1st and 2nd postoperative days, these parameters were collected together with cardiac output and calculation of venous admixture. For the 3 groups a severe restrictive pulmonary defect was observed during the 1st postoperative day. On the 2nd postoperative day, in opposition to IS, intensive use of CPAP and NIV-2P reduced significantly the venous admixture (Ppreventive use of NIV can be considered as an effective means to decrease the negative effect of coronary surgery on pulmonary function.

  20. Development of the TLALOCNet GPS-Met Network in Northwestern Mexico: Supporting Continuous Water Vapor Observations of the North American Monsoon

    Science.gov (United States)

    Galetzka, J.; Feaux, K.; Cabral, E.; Salazar-Tlaczani, L.; Adams, D. K.; Serra, Y. L.; Mattioli, G. S.; Miller, M. M.

    2014-12-01

    TLALOCNet is a combined atmospheric and tectonic cGPS-Met network in Mexico designed for the investigation of climate, atmospheric processes, the earthquake cycle, and tectonics. While EarthScope-Plate Boundary Observatory (conterminous US, Alaska, Puerto Rico) is among the networks poised to become a nucleus for hemisphere-scale GPS observations, the completion of TLALOCNet at the end of 2015 will close a gap between PBO and other Latin American GPS networks that include COCONet (Central America, Caribbean, and Northern South America), CAnTO, CAP, and IGS extending from Alaska to Patagonia. The National Science Foundation funded the construction and operation of TLALOCNet, with significant matching funds and resources provided by the Universidad Nacional Autónoma de México (UNAM). The project will involve the construction or refurbishment of 38 cGPS-Met stations in Mexico built to PBO standards. The first three TLALOCNet stations were installed in the northern Mexican states of Sonora and Chihuahua in July 2014, following the North American Monsoon GPS Transect Experiment 2013. Together these observations better characterize critical components of water transport in the region. Data from these stations are now available through the UNAVCO data archive and can be downloaded from http://facility.unavco.org/data/dai2/app/dai2.html#. By the end of 2014, TLALOCNet data, together with complementary data from other regional cGPS networks in Mexico, will also be openly available through a Mexico-based data center. We will present the status of the project to date, including an overview of the station hardware, data communications, data flow, construction schedule, and science objectives. We will also present some of the challenges encountered, including regional logistics, shipping and importation, site security, and other issues associated with the construction and operation of a large continuous GPS network.

  1. 灵活部署COM组件保障业务的连续性%Flexible Deployment of COM Components to Support Business Continuity

    Institute of Scientific and Technical Information of China (English)

    徐金建

    2011-01-01

    Objective To reduce the impact of failure caused by the COM component failure to ihe conlinuity of the entire system for the COM component application system based on 3-layer structure. Methods The system took variety methods for the COM components management deployment. Contrast of their respective advantages and disadvantages were made so that the deployment of the COM component-based application would be more flexible and rational. Reaulto Business continuity and system stability were improved. ^*?M*hifM" The deployment of the COM component should be flexible according to the practical component-based application. This plays the crucial role for the whole system's suslainabilily and usability.[Chinese Medical Equipment Journal,2011,32(10) :59-60J%目的:对基于3层结构的COM组件的应用系统,尽可能降低由于COM组件故障而影响整个系统业务的连续性故障发生.方法:系统采用多种COM组件管理部署方法,并进行了详细的对比,给出了各自的优、缺点,使得COM组件应用部署更具灵活性、合理性.结果:提高了业务连续性、实时性及系统稳定性.结论:基于组件的应用系统,应根据实际应用情况灵活部署COM组件,对整个系统的持续性、可用性起到决定作用.

  2. Continuous aerobic treatment of dairy waste waters. Supported reactor; Depuracion aerobia de aguas residuales de industrias lacteas en regimen continuo. Reactor con soporte

    Energy Technology Data Exchange (ETDEWEB)

    Carta, F.; Romeero, F.; Pereda, J.; Alvarez, P. [Universidad de Sevilla (Spain)

    1998-12-31

    Experiences in continuous flow been carried out to achieve effluents with low COD and a minimum ammonium nitrogen concentration. A 80 liter reactor with rectangular cross-section (width 25 cm and depth 30 cm) and length 150 cm was used thermostated. The system was aerated by air injection the air passed through perforated tubes settled at the bottom and covered by a plastic mesh. The liquor (water and milk) temperature was near 30 degree centigree Mixtures of milk and water, with pH of 11 and containing 3500 mg COD/1 (as sewage from Dairy Center`s) were fed into the reactor. A mixed cultive constituted of cultives isolated from Dairy Center`s effluent adapted to 30 degree centigree for 19 days, and mixed with sludge from a domestic wastewater treatment plant was used as inoculum. The influent flow rates were 81/d, 101/d and 12,6 L/d. The experiences went on up to stationary-state. In all the experience, the pH values become stabilized over 8,5 and the nitrite and nitrate nitrogen concentrations were insignificant. It was observed that when flow rate rises, the average COD values and the ammonium nitrogen concentrations (achieved at the end of experiences) decreased in a parallel way up to a certain flow rate value at which they are almost constant with the increase of the flow rate. The sludge analysis showed a composition of 5,4 gN and 2,4 gP in 100 g biomass. (Author) 16 refs.

  3. Continuous degradation of maltose: improvement in stability and catalytic properties of maltase (α-glucosidase) through immobilization using agar-agar gel as a support.

    Science.gov (United States)

    Nawaz, Muhammad Asif; Karim, Asad; Aman, Afsheen; Marchetti, Roberta; Qader, Shah Ali Ul; Molinaro, Antonio

    2015-04-01

    Maltose degrading enzyme was immobilized within agar-agar support via entrapment method due to its industrial utilization. The maximum immobilization efficiency (82.77%) was achieved using 4.0% agar-agar keeping the diameter of bead up to 3.0 mm. The matrix entrapment showed maximum catalytic activity at pH 7.0 and temperature 65 °C. Substrate saturation kinetics showed that the K m of immobilized enzyme increased from 1.717 to 2.117 mM ml(-1) where as Vmax decreased from 8,411 to 7,450 U ml(-1 )min(-1) as compared to free enzyme. The immobilization significantly increased the stability of maltase against various temperatures and immobilized maltase retain 100% of its original activity after 2 h at 50 °C, whereas the free maltase only showed 60% residual activity under same condition. The reusability of entrapped maltase showed activity up to 12 cycles and retained 50% of activity even after 5th cycle. Storage stability of agar entrapped maltase retain 73% of its initial activity even after 2 months when stored at 30 °C while free enzyme showed only 37% activity at same storage conditions.

  4. Discussion about decision support systems using continuous multi-criteria methods for planning in areas with hydro-basins, agriculture and forests, from examples in Argentine.

    Science.gov (United States)

    Anton, J. M.; Grau, J. B.; Tarquis, A. M.; Andina, D.; Cisneros, J. M.; Sanchez, E.

    2012-04-01

    The authors were involved last years in projects considering diverse decision problems on the use of some regions in Argentine, and also related to rivers or rural services in them. They used sets of multi-criteria decision methods, first discrete when the problem included few distinct alternatives, such as e.g. forestry, traditional or intensive agriculture. For attributes they were different effects, classified then in environmental, economic and social criteria. Extending to other gentler areas, such as at South of the Province of Córdoba, Arg., they have balanced more delicately effects of continuous levels of actions, with a combination of Goal Programming linked methods, and they adopted compromises to have precise solutions. That has shown, and in part open, a line of research, as the setting of such models require various kinds of definitions and valuations, including optimizations, goals with penalties in deviations and restrictions. That can be in diverse detail level and horizon, in presence of various technical and human horizons, and that can influence politics of use of terrain and production that will require public and private agents. The research will consider consideration of use and conservation of soils, human systems and agro productions, and hence models for optimization, preferably in such Goal Programming ways. That will require considering various systems of models, first in theory to be reliable, and then in different areas to evaluate the quality of conclusions, and maybe that successively if results are found advantageous. The Bayesian ways will be considered, but they would require a prospective of sets of precise future states of nature or markets with elicited probabilities, which are neither evident nor decisive for the moment, as changes may occur in years but will be very unexpected or uncertain. The results will be lines of models to aid to establish policies of use of territories, by public agencies setting frames for private

  5. Supported ionic liquid-phase (SILP) catalysis

    DEFF Research Database (Denmark)

    Riisager, Anders; Fehrmann, Rasmus; Wasserscheid, P.

    2005-01-01

    The concept of supported ionic liquid-phase (SILP) catalysis has been demonstrated for gas- and liquid-phase continuous fixed-bed reactions using rhodium phosphine catalyzed hydroformylation of propene and 1-octene as examples. The nature of the support had important influence on both the catalytic...

  6. Intergenerational Continuity and Discontinuity in Harsh Parenting

    Science.gov (United States)

    Conger, Rand D.; Schofield, Thomas J.; Neppl, Tricia K.

    2012-01-01

    SYNOPSIS The Family Transitions Project began in 1989 to see how rural families in Iowa were coping with the severe economic downturn in agriculture at that time. In this report we show that cohort members who were treated harshly by their parents tended to emulate these behaviors with their children. However, if they co-parented with a partner who demonstrated a warm and supportive parenting style, intergenerational continuity was disrupted. PMID:22754400

  7. Continuity theory

    CERN Document Server

    Nel, Louis

    2016-01-01

    This book presents a detailed, self-contained theory of continuous mappings. It is mainly addressed to students who have already studied these mappings in the setting of metric spaces, as well as multidimensional differential calculus. The needed background facts about sets, metric spaces and linear algebra are developed in detail, so as to provide a seamless transition between students' previous studies and new material. In view of its many novel features, this book will be of interest also to mature readers who have studied continuous mappings from the subject's classical texts and wish to become acquainted with a new approach. The theory of continuous mappings serves as infrastructure for more specialized mathematical theories like differential equations, integral equations, operator theory, dynamical systems, global analysis, topological groups, topological rings and many more. In light of the centrality of the topic, a book of this kind fits a variety of applications, especially those that contribute to ...

  8. Continuous Markovian Logics

    DEFF Research Database (Denmark)

    Mardare, Radu Iulian; Cardelli, Luca; Larsen, Kim Guldstrand

    2012-01-01

    Continuous Markovian Logic (CML) is a multimodal logic that expresses quantitative and qualitative properties of continuous-time labelled Markov processes with arbitrary (analytic) state-spaces, henceforth called continuous Markov processes (CMPs). The modalities of CML evaluate the rates...... characterizes stochastic bisimilarity and it supports the definition of a quantified extension of the satisfiability relation that measures the "compatibility" between a model and a property. In this context, the metaproperties allows us to prove two robustness theorems for the logic stating that one can...

  9. Mobile Learning Application in Continuing Education:the Coherence,Application Mode and Support Conditions%移动学习应用与成人教育:契合点、应用模式与支撑条件

    Institute of Scientific and Technical Information of China (English)

    徐和平; 吴小建

    2014-01-01

    移动学习作为一种新型的数字化学习模式,其移动性、高效性、交互性、虚拟性以及其强大的扩展性的特点契合了成人教育的学习方式,通过分析移动学习应用与成人教育的模式,提出了要实现成人移动学习需要有理论支撑、技术支撑和资源支撑,同时还需要建立统一的标准。%As a new way of digital learning ,mobile learning has the characteristics of mobility ,high effi-ciency ,interactivity ,virtuality and powerful extensibility ,which are coherent with the features of continuing education . Through analyzing mobile learning applications and continuing education mode , the article proposes that there should be support in theory ,technology and resources to realize the continuing mobile education .Meanwhile ,unified standards should also be established .

  10. Supporting Continuous Improvement in California's Education System

    Science.gov (United States)

    Darling-Hammond, Linda; Plank, David N.

    2015-01-01

    California's new accountability system originated in the radical decentralization of power and authority from Sacramento to local schools and their communities brought about by the Legislature's adoption of the Local Control Funding Formula (LCFF) in 2013. Under California's previous accountability policies and the federal "No Child Left…

  11. Continuing Support of the ASA Standards Program

    Science.gov (United States)

    1993-05-20

    0 U, U,~ ~ U) ZGc Zw S31368 COMMITTEE CORRESPONDENCE ATTACHMENT C-1 Tom Frank, Ph.D. 5-A Moore Building Department of Communication Disorders Penn...Chair ’s Circulated-by: A. Brenig, ASA Standard na igkf Reference Document(s): ATTACHMEN rvision of ANSI S1.1-1960 (R 1976) DOC/Lb ýNj’ P8 cou ical...the following address. Tomasz R. Letowski, Ph.D. 5-B Moore Building Department of Communication Disorders Penn State University University Park, PA 16802 Phone: 814/863-2018; FAX: 814/863-3759

  12. Nuclear power demonstrating

    Energy Technology Data Exchange (ETDEWEB)

    Basmajian, V. V.; Haldeman, C. W.

    1980-08-12

    Apparatus for demonstrating the operation of a closed loop nuclear steam electric generating plant includes a transparent boiler assembly having immersion heating elements, which may be quartz lamps or stainless steel encased resistive immersion heating units with a quartz iodide lamp providing a source of visible radiation when using the encased immersion heating units. A variable voltage autotransformer is geared to a support rod for simulated reactor control rods for controlling the energy delivered to the heating elements and arranged so that when the voltage is high, the rods are withdrawn from the boiler to produce increased heating and illumination proportional to rod position, thereby simulating nuclear reaction. A relief valve, steam outlet pipe and water inlet pipe are connected to the boiler with a small stainless steel resistive heating element in the steam outlet pipe providing superheat. This heater is connected in series with a rheostat mounted on the front panel to provide superheat adjustments and an interlock switch that prevents the superheater from being energized when the steam valve is off with with no flow through the superheater. A heavy blue plastic radiation shield surrounds the boiler inside a bell jar.

  13. A Demonstration of Lusail

    KAUST Repository

    Mansour, Essam

    2017-05-10

    There has been a proliferation of datasets available as interlinked RDF data accessible through SPARQL endpoints. This has led to the emergence of various applications in life science, distributed social networks, and Internet of Things that need to integrate data from multiple endpoints. We will demonstrate Lusail; a system that supports the need of emerging applications to access tens to hundreds of geo-distributed datasets. Lusail is a geo-distributed graph engine for querying linked RDF data. Lusail delivers outstanding performance using (i) a novel locality-aware query decomposition technique that minimizes the intermediate data to be accessed by the subqueries, and (ii) selectivityawareness and parallel query execution to reduce network latency and to increase parallelism. During the demo, the audience will be able to query actually deployed RDF endpoints as well as large synthetic and real benchmarks that we have deployed in the public cloud. The demo will also show that Lusail outperforms state-of-the-art systems by orders of magnitude in terms of scalability and response time.

  14. LIMB Demonstration Project Extension and Coolside Demonstration

    Energy Technology Data Exchange (ETDEWEB)

    Goots, T.R.; DePero, M.J.; Nolan, P.S.

    1992-11-10

    This report presents results from the limestone Injection Multistage Burner (LIMB) Demonstration Project Extension. LIMB is a furnace sorbent injection technology designed for the reduction of sulfur dioxide (SO[sub 2]) and nitrogen oxides (NO[sub x]) emissions from coal-fired utility boilers. The testing was conducted on the 105 Mwe, coal-fired, Unit 4 boiler at Ohio Edison's Edgewater Station in Lorain, Ohio. In addition to the LIMB Extension activities, the overall project included demonstration of the Coolside process for S0[sub 2] removal for which a separate report has been issued. The primary purpose of the DOE LIMB Extension testing, was to demonstrate the generic applicability of LIMB technology. The program sought to characterize the S0[sub 2] emissions that result when various calcium-based sorbents are injected into the furnace, while burning coals having sulfur content ranging from 1.6 to 3.8 weight percent. The four sorbents used included calcitic limestone, dolomitic hydrated lime, calcitic hydrated lime, and calcitic hydrated lime with a small amount of added calcium lignosulfonate. The results include those obtained for the various coal/sorbent combinations and the effects of the LIMB process on boiler and plant operations.

  15. Coal demonstration plants. Quarterly report, July-September 1979

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-07-01

    The status of two coal liquefaction demonstration plants and of four coal gasification demonstration plants is reviewed under the following headings: company involved, contract number, funding, process name, process description, flowsheet, schedule, history and progress during the July-September quarter, 1979. Supporting projects in coal feeding systems, valves, grinding equipment, instrumentation, process control and water treatment are discussed in a similar way. Conceptual design work on commercial plants for coal to methanol and for a HYGAS high BTU gas plant were continued. (LTN)

  16. Buried Waste Integrated Demonstration Plan

    Energy Technology Data Exchange (ETDEWEB)

    Kostelnik, K.M.

    1991-12-01

    This document presents the plan of activities for the Buried Waste Integrated Demonstration (BWID) program which supports the environmental restoration (ER) objectives of the Department of Energy (DOE) Complex. Discussed in this plan are the objectives, organization, roles and responsibilities, and the process for implementing and managing BWID. BWID is hosted at the Idaho National Engineering Laboratory (INEL), but involves participants from throughout the DOE Complex, private industry, universities, and the international community. These participants will support, demonstrate, and evaluate a suite of advanced technologies representing a comprehensive remediation system for the effective and efficient remediation of buried waste. The processes for identifying technological needs, screening candidate technologies for applicability and maturity, selecting appropriate technologies for demonstration, field demonstrating, evaluation of results and transferring technologies to environmental restoration programs are also presented. This document further describes the elements of project planning and control that apply to BWID. It addresses the management processes, operating procedures, programmatic and technical objectives, and schedules. Key functions in support of each demonstration such as regulatory coordination, safety analyses, risk evaluations, facility requirements, and data management are presented.

  17. Operations Support of Phase 2 Integrated Demonstration In Situ Bioremediation. Volume 4, Final report: Averaged data in tabular form, Disks 3,4; Averaged data in graphical form, Disks 1,2,3,4

    Energy Technology Data Exchange (ETDEWEB)

    Hazen, T.C. [Westinghouse Savannah River Co., Aiken, SC (United States)

    1993-09-01

    This report contains experimental data collected during the demonstration of in situ bioremediation at the Savannah River Site. This project was designed to demonstrate in situ bioremediation of ground water and sediment contaminated with chlorinated solvents. Indigenous microorganisms were stimulated to degrade trichloroethylene, tetrachloroethylene, and their daughter products in situ by addition of nutrients to the contaminated aquifer and adjacent vadose zone. The principle carbon/energy source nutrient used in this demonstration was methane. In situ biodegradation is a highly attractive technology for remediation because contaminants are destroyed, not simply moved to another location or immobilized, thus decreasing costs, risks, and time, while increasing efficiency, safety, and public and regulatory acceptability.

  18. Effect of increasing pump speed during exercise on peak oxygen uptake in heart failure patients supported with a continuous-flow left ventricular assist device. A double-blind randomized study

    DEFF Research Database (Denmark)

    Jung, Mette Holme; Hansen, Peter Bo; Sander, Kaare

    2014-01-01

    AIMS: Continuous-flow left ventricular assist device (CF-LVAD) implantation is associated with improved quality of life, but the effect on exercise capacity is less well documented. It is uncertain whether a fixed CF-LVAD pump speed, which allows for sufficient circulatory support at rest, remains...... adequate during exercise. The aim of this study was to evaluate the effects of fixed versus incremental pump speed on peak oxygen uptake (peak VO2) during a maximal exercise test. METHODS AND RESULTS: In CF-LVAD (HeartMate II) patients exercise testing measuring peak oxygen uptake (VO2) was performed...... on an ergometer bike twice in one day: once with fixed pump speed (testfix) and once with incremental pump speed (testinc). The order of testfix and testinc in each patient was determined by randomization. During testinc pump speed was increased from the baseline value by 400 rpm/2 min. Fourteen patients (aged 23...

  19. Topological Photonics for Continuous Media

    Science.gov (United States)

    Silveirinha, Mario

    Photonic crystals have revolutionized light-based technologies during the last three decades. Notably, it was recently discovered that the light propagation in photonic crystals may depend on some topological characteristics determined by the manner how the light states are mutually entangled. The usual topological classification of photonic crystals explores the fact that these structures are periodic. The periodicity is essential to ensure that the underlying wave vector space is a closed surface with no boundary. In this talk, we prove that it is possible calculate Chern invariants for a wide class of continuous bianisotropic electromagnetic media with no intrinsic periodicity. The nontrivial topology of the relevant continuous materials is linked with the emergence of edge states. Moreover, we will demonstrate that continuous photonic media with the time-reversal symmetry can be topologically characterized by a Z2 integer. This novel classification extends for the first time the theory of electronic topological insulators to a wide range of photonic platforms, and is expected to have an impact in the design of novel photonic systems that enable a topologically protected transport of optical energy. This work is supported in part by Fundacao para a Ciencia e a Tecnologia Grant Number PTDC/EEI-TEL/4543/2014.

  20. Research on Continuous Transformation and Reinforcement for Old Simply Supported Hollow Slab Bridge%旧空心板简支梁桥的连续化改造加固研究

    Institute of Scientific and Technical Information of China (English)

    韦建刚; 黄蕾; 李佩元; 吴庆雄

    2014-01-01

    In order to improve bearing capacity and safety margin of the old simply supported hollow slab bridge in service ,the authors applied the system transformation thought that was used in the construction of transforming a simply supported bridge structure into a continuous one to the reinforcement of the old simply supported hollow slab bridge in service ,and put forward a method that could reinforce the old bridge and improve their bearing capacity of simply supported continuous transformation .Meanwhile ,the implementation method of this reinforced technology was introduced .The effect of load ,shrinkage and creep of the new and old concrete after simply supported continuous transformation was analyzed .The results indicate that the largest bending moment in the mid‐span is decreased by 13 .8% under the most unfavorable conditions ,and the maximum shear in the edge across the lateral pivot is reduced by 7 .6% ,and the deflection in the mid‐span is even decreased by 42% .T he bending moment led by the shrinkage and creep of the new and old concrete with different ages on pier top is positive bending moment ,which is harmful to the force in cross section .T he bending moment in the cross section of the secondary side span across is the biggest increase by 3 .9% .Negative bending moment value on pier top decreased at the same time ,the biggest decrease of that in the side span is 4 .3% ,so the effects are not signifi‐cant .%为提高既有旧空心板简支梁桥的承载能力和安全储备,将先简支后连续施工方法中的体系转换思想运用到旧空心板简支梁桥的加固改造上,提出了一种旧桥改造提载加固方案———简支连续化改造,并对此加固技术的实施方法进行了介绍;对简支连续化改造后的荷载效应以及连续化后新、旧混凝土收缩徐变效应进行了分析计算。结果表明:最不利工况下跨中最大弯矩下降了13.8%,边跨外侧支点最大剪力降低7.6

  1. Polarized Light Corridor Demonstrations.

    Science.gov (United States)

    Davies, G. R.

    1990-01-01

    Eleven demonstrations of light polarization are presented. Each includes a brief description of the apparatus and the effect demonstrated. Illustrated are strain patterns, reflection, scattering, the Faraday Effect, interference, double refraction, the polarizing microscope, and optical activity. (CW)

  2. Ce-Zr-La/Al2O3 prepared in a continuous stirred-tank reactor: a highly thermostable support for an efficient Rh-based three-way catalyst.

    Science.gov (United States)

    Wang, Su-Ning; Lan, Li; Hua, Wei-Bo; Shi, Zhong-Hua; Chen, Yao-Qiang; Gong, Mao-Chu; Zhong, Lin

    2015-12-21

    Two Ce-Zr-La/Al2O3 composite oxides, CZLA-C and CZLA-B, were synthesized using a co-precipitation method in a continuous stirred-tank reactor (CSTR) and a batch reactor (BR), respectively. Two Rh-based three-way catalysts (TWCs), Rh/CZLA-C and Rh/CZLA-B were obtained by a wet-impregnation method using the two composites as the supports. The physicochemical properties of the samples before and after thermal treatment at 1000 °C were characterized by N2 adsorption-desorption, X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), H2-temperature programmed reduction (H2-TPR) and CO chemisorption. The results indicated that CZLA-C shows higher thermal stability than CZLA-B due to a sparsely-agglomerated morphology. Compared with Rh/CZLA-B, Rh/CZLA-C displayed better reducibility and higher thermal stability and exhibited significantly higher activity in the catalytic removal of the simulated gasoline vehicle exhaust emission (NO, CO and C3H8). Our work can provide a facile and economical synthesis route to advanced support materials and catalysts for exhaust emission control.

  3. The POSEIDON Demonstrator

    NARCIS (Netherlands)

    Laar, P.J.L.J. van de

    2013-01-01

    In this chapter, we discuss the Poseidon demonstrator: a demonstrator that integrates the individual research results of all partners of the Poseidon project. After describing how the Poseidon demonstrator was built, deployed, and operated, we will not only show many results obtained from the demons

  4. Overhead Projector Demonstrations.

    Science.gov (United States)

    Kolb, Doris, Ed.

    1988-01-01

    Details two demonstrations for use with an overhead projector in a chemistry lecture. Includes "A Very Rapidly Growing Silicate Crystal" and "A Colorful Demonstration to Simulate Orbital Hybridization." The materials and directions for each demonstration are included as well as a brief explanation of the essential learning involved. (CW)

  5. Fragility analysis of long span continuous rigid frame bridge under multi-support excitations%多点地震激励下大跨连续钢构桥易损性分析

    Institute of Scientific and Technical Information of China (English)

    李吉涛; 杨庆山; 刘阳冰

    2013-01-01

    Due to wave passage effect, incoherence effect, local effect and other factors in seismic ground motion, the internal force and deformation of long span continuous rigid framed bridges will be error-estimated when seismic responses analysis is performed under identical support ground motion excitations. A Monte Carlo simulation method was used to establish the random sample for the system of large-span continuous rigid frame bridge under ground motion excitation, by means of considering the uncertainties of structural material and ground motion, both for identical support ground motion excitations and multiple support ground motion excitations. The ductility ratio of piers was defined as the index of damage state of the bridge. The seismic fragility analysis was carried out under the two different modes of excitations and the fragility curves of the bridge were given based on the damage state definition. The peak acceleration relationship between the two different modes of excitations was obtained under the same level damage.%针对地震动存在行波效应、场地效应、不相干效应等因素,分析大跨连续钢构桥在一致地震激励输入响应时结构内力和变形会被偏估问题,考虑结构及地震动不确定性,采用蒙特卡罗方法建立一致激励与多点激励两种工况下大跨连续钢构桥-地震动系统随机样本.以桥墩位移延性比表示桥梁破坏状态阶段,对桥梁易损性进行分析,给出大跨连续钢构桥结构的易损性曲线,得到同样程度破坏的多点地震激励与一致地震激励下加速度峰值关系.

  6. Humidified High Flow Nasal Cannula versus Nasal Continuous Positive Airway Pressure as an Initial Respiratory Support in Preterm Infants with Respiratory Distress: a Randomized, Controlled Non-Inferiority Trial.

    Science.gov (United States)

    Shin, Jeonghee; Park, Kyuhee; Lee, Eun Hee; Choi, Byung Min

    2017-04-01

    Heated, humidified, high-flow nasal cannula (HHFNC) is frequently used as a noninvasive respiratory support for preterm infants with respiratory distress. But there are limited studies that compares HHFNC with nasal continuous positive airway pressure (nCPAP) only as the initial treatment of respiratory distress in preterm infants immediately after birth. The aim of this study is to assess the effectiveness and safety of HHFNC compared to nCPAP for the initial treatment of preterm infants with respiratory distress. Preterm infants at between 30 and 35 weeks of gestational age were randomized to HHFNC or nCPAP when they showed respiratory distress in less than 24 hours of age postnatally. Preterm infants who needed invasive respiratory supports were excluded. Primary outcome was the incidence of treatment failure (defined as need for the intubation or mechanical ventilation). Eighty-five infants were analyzed. Sixteen of 42 infants randomized to HHFNC showed treatment failure compared to 9 of 43 infants using nCPAP (Risk difference 17.17 [-1.90-36.23]; P = 0.099). In terms of the reason for treatment failure, the frequency of hypoxia was significantly higher in the HHFNC group than in the nCPAP group (P = 0.020). There was no difference between the 2 groups in terms of respiratory and clinical outcomes and complications. Although HHFNC is safe compared to nCPAP, it is not certain that HHFNC is effective compared to nCPAP non-inferiorly as an initial respiratory support in preterm infants with respiratory distress.

  7. Strategy Guideline: Demonstration Home

    Energy Technology Data Exchange (ETDEWEB)

    Savage, C.; Hunt, A.

    2012-12-01

    This guideline will provide a general overview of the different kinds of demonstration home projects, a basic understanding of the different roles and responsibilities involved in the successful completion of a demonstration home, and an introduction into some of the lessons learned from actual demonstration home projects. Also, this guideline will specifically look at the communication methods employed during demonstration home projects. And lastly, we will focus on how to best create a communication plan for including an energy efficient message in a demonstration home project and carry that message to successful completion.

  8. Strategy Guideline. Demonstration Home

    Energy Technology Data Exchange (ETDEWEB)

    Hunt, A.; Savage, C.

    2012-12-01

    This guideline will provide a general overview of the different kinds of demonstration home projects, a basic understanding of the different roles and responsibilities involved in the successful completion of a demonstration home, and an introduction into some of the lessons learned from actual demonstration home projects. Also, this guideline will specifically look at the communication methods employed during demonstration home projects. And lastly, we will focus on how to best create a communication plan for including an energy efficient message in a demonstration home project and carry that message to successful completion.

  9. Manufacturing Demonstration Facility (MDF)

    Data.gov (United States)

    Federal Laboratory Consortium — The U.S. Department of Energy Manufacturing Demonstration Facility (MDF) at Oak Ridge National Laboratory (ORNL) provides a collaborative, shared infrastructure to...

  10. Toy Demonstrator's "VISIT" Handbook.

    Science.gov (United States)

    Levenstein, Phyllis

    The role of the toy demonstrator in a home-based, mother-involved intervention effort (Verbal Interaction Project) is presented in this handbook for staff members. It is believed that the prerequisites for functioning in the toy demonstrator's role are a sense of responsibility, patience with the children and their mothers, and willingness to be…

  11. Levitation Kits Demonstrate Superconductivity.

    Science.gov (United States)

    Worthy, Ward

    1987-01-01

    Describes the "Project 1-2-3" levitation kit used to demonstrate superconductivity. Summarizes the materials included in the kit. Discusses the effect demonstrated and gives details on how to obtain kits. Gives an overview of the documentation that is included. (CW)

  12. Kinetics and Catalysis Demonstrations.

    Science.gov (United States)

    Falconer, John L.; Britten, Jerald A.

    1984-01-01

    Eleven videotaped kinetics and catalysis demonstrations are described. Demonstrations include the clock reaction, oscillating reaction, hydrogen oxidation in air, hydrogen-oxygen explosion, acid-base properties of solids, high- and low-temperature zeolite reactivity, copper catalysis of ammonia oxidation and sodium peroxide decomposition, ammonia…

  13. Levitation Kits Demonstrate Superconductivity.

    Science.gov (United States)

    Worthy, Ward

    1987-01-01

    Describes the "Project 1-2-3" levitation kit used to demonstrate superconductivity. Summarizes the materials included in the kit. Discusses the effect demonstrated and gives details on how to obtain kits. Gives an overview of the documentation that is included. (CW)

  14. Space Solar Power Demonstrations: Challenges and Progress

    Science.gov (United States)

    Howell, Joe T.; Mankins, John C.; Lavoie, Anthony R. (Technical Monitor)

    2002-01-01

    The prospects of using electrical power beamed from space are coming closer to reality with the continued pursuit and improvements in the supporting space solar research and technology. Space Solar Power (SSP) has been explored off and on for approximately three decades as a viable alternative and clean energy source. Results produced through the more recent Space Solar Power Exploratory Research and Technology (SERT) program involving extensive participation by industry, universities, and government has provided a sound technical basis for believing that technology can be improved to the extent that SSP systems can be built, economically feasible, and successfully deployed in space. Considerable advancements have been made in conceptual designs and supporting technologies including solar power generation, wireless power transmission, power management distribution, thermal management and materials, and the integrated systems engineering assessments. Basic technologies have progressed to the point were the next logical step is to formulate and conduct sophisticated demonstrations involving prototype hardware as final proof of concepts and identify high end technology readiness levels in preparation for full scale SSP systems designs. In addition to continued technical development issues, environmental and safety issues must be addressed and appropriate actions taken to reassure the public and prepare them for the future use of this alternative renewable energy resource. Accomplishing these objectives will allow informed future decisions regarding further SSP and related R&D investments by both NASA management and prospective external partners. In particular, accomplishing these objectives will also guide further definition of SSP and related technology roadmaps including performance objectives, resources and schedules; including 'multi-purpose' applications (terrestrial markets, science, commercial development of space, and other government missions).

  15. Continuous parallel coordinates.

    Science.gov (United States)

    Heinrich, Julian; Weiskopf, Daniel

    2009-01-01

    Typical scientific data is represented on a grid with appropriate interpolation or approximation schemes,defined on a continuous domain. The visualization of such data in parallel coordinates may reveal patterns latently contained in the data and thus can improve the understanding of multidimensional relations. In this paper, we adopt the concept of continuous scatterplots for the visualization of spatially continuous input data to derive a density model for parallel coordinates. Based on the point-line duality between scatterplots and parallel coordinates, we propose a mathematical model that maps density from a continuous scatterplot to parallel coordinates and present different algorithms for both numerical and analytical computation of the resulting density field. In addition, we show how the 2-D model can be used to successively construct continuous parallel coordinates with an arbitrary number of dimensions. Since continuous parallel coordinates interpolate data values within grid cells, a scalable and dense visualization is achieved, which will be demonstrated for typical multi-variate scientific data.

  16. Status of the Majorana Demonstrator

    Energy Technology Data Exchange (ETDEWEB)

    Cuesta, C.; Buuck, M.; Detwiler, J. A.; Gruszko, J.; Guinn, I. S.; Leon, J.; Robertson, R. G. H. [Center for Experimental Nuclear Physics and Astrophysics, and Department of Physics, University of Washington, Seattle, WA (United States); Abgrall, N.; Bradley, A. W.; Chan, Y.-D.; Mertens, S.; Poon, A. W. P. [Nuclear Science Division, Lawrence Berkeley National Laboratory, Berkeley, CA (United States); Arnquist, I. J.; Hoppe, E. W.; Kouzes, R. T.; LaFerriere, B. D.; Orrell, J. L. [Pacific Northwest National Laboratory, Richland, WA (United States); Avignone, F. T. [Department of Physics and Astronomy, University of South Carolina, Columbia, SC (United States); Oak Ridge National Laboratory, Oak Ridge, TN (United States); Baldenegro-Barrera, C. X.; Bertrand, F. E. [Oak Ridge National Laboratory, Oak Ridge, TN (United States); and others

    2015-10-28

    The MAJORANA Collaboration is constructing the MAJORANA DEMONSTRATOR, an ultra-low background, modular, HPGe detector array with a mass of 44-kg (29 kg {sup 76}Ge and 15 kg {sup nat}Ge) to search for neutrinoless double beta decay in {sup 76}Ge. The next generation of tonne-scale Ge-based neutrinoless double beta decay searches will probe the neutrino mass scale in the inverted-hierarchy region. The MAJORANA DEMONSTRATOR is envisioned to demonstrate a path forward to achieve a background rate at or below 1 count/tonne/year in the 4 keV region of interest around the Q-value of 2039 keV. The MAJORANA DEMONSTRATOR follows a modular implementation to be easily scalable to the next generation experiment. First, the prototype module was assembled; it has been continuously taking data from July 2014 to June 2015. Second, Module 1 with more than half of the total enriched detectors and some natural detectors has been assembled and it is being commissioned. Finally, the assembly of Module 2, which will complete MAJORANA DEMONSTRATOR, is already in progress.

  17. Status of the MAJORANA DEMONSTRATOR

    CERN Document Server

    Cuesta, C; Arnquist, I J; Avignone, F T; Baldenegro-Barrera, C X; Barabash, A S; Bertrand, F E; Bradley, A W; Brudanin, V; Busch, M; Buuck, M; Byram, D; Caldwell, A S; Chan, Y-D; Christofferson, C D; Chu, P -H; Detwiler, J A; Efremenko, Yu; Ejiri, H; Elliott, S R; Galindo-Uribarri, A; Gilliss, T; Giovanetti, G K; Goett, J; Green, M P; Gruszko, J; Guinn, I S; Guiseppe, V E; Henning, R; Hoppe, E W; Howard, S; Howe, M A; Jasinski, B R; Keeter, K J; Kidd, M F; Konovalov, S I; Kouzes, R T; LaFerriere, B D; Leon, J; MacMullin, J; Martin, R D; Massarczyk, R; Meijer, S J; Mertens, S; Orrell, J L; O'Shaughnessy, C; Poon, A W P; Radford, D C; Rager, J; Rielage, K; Robertson, R G H; Romero-Romero, E; Shanks, B; Shirchenko, M; Snyder, N; Suriano, A M; Tedeschi, D; Trimble, J E; Varner, R L; Vasilyev, S; Vetter, K; Vorren, K; White, B R; Wilkerson, J F; Wiseman, C; Xu, W; Yakushev, E; Yu, C -H; Yumatov, V; Zhitnikov, I

    2015-01-01

    The MAJORANA Collaboration is constructing the MAJORANA DEMONSTRATOR, an ultra-low background, modular, HPGe detector array with a mass of 44-kg (29 kg 76Ge and 15 kg natGe) to search for neutrinoless double beta decay in Ge-76. The next generation of tonne-scale Ge-based neutrinoless double beta decay searches will probe the neutrino mass scale in the inverted-hierarchy region. The MAJORANA DEMONSTRATOR is envisioned to demonstrate a path forward to achieve a background rate at or below 1 count/tonne/year in the 4 keV region of interest around the Q-value of 2039 keV. The MAJORANA DEMONSTRATOR follows a modular implementation to be easily scalable to the next generation experiment. First, the prototype module was assembled; it has been continuously taking data from July 2014 to June 2015. Second, Module 1 with more than half of the total enriched detectors and some natural detectors has been assembled and it is being commissioned. Finally, the assembly of Module 2, which will complete MAJORANA DEMONSTRATOR, ...

  18. Methanol Cannon Demonstrations Revisited.

    Science.gov (United States)

    Dolson, David A.; And Others

    1995-01-01

    Describes two variations on the traditional methanol cannon demonstration. The first variation is a chain reaction using real metal chains. The second example involves using easily available components to produce sequential explosions that can be musical in nature. (AIM)

  19. TENCompetence tool demonstration

    NARCIS (Netherlands)

    Kluijfhout, Eric

    2010-01-01

    Kluijfhout, E. (2009). TENCompetence tool demonstration. Presented at Zorgacademie Parkstad (Health Academy Parkstad), Limburg Leisure Academy, Life Long Learning Limburg and a number of regional educational institutions. May, 18, 2009, Heerlen, The Netherlands: Open University of the Netherlands, T

  20. Land Management Research Demonstration

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — In 2002, Neal Smith National Wildlife Refuge became one of the first Land Management and Research Demonstration (LMRD) sites. These sites are intended to serve as...

  1. 40 CFR 264.272 - Treatment demonstration.

    Science.gov (United States)

    2010-07-01

    ... Section 264.272 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) STANDARDS FOR OWNERS AND OPERATORS OF HAZARDOUS WASTE TREATMENT, STORAGE, AND DISPOSAL FACILITIES Land Treatment § 264.272 Treatment demonstration. (a) For each waste that will be applied to...

  2. Pancreaticopleural fistula : CT demonstration

    Energy Technology Data Exchange (ETDEWEB)

    Hahm, Jin Kyeung [Chuncheon Medical Center, ChunChon (Korea, Republic of)

    1997-03-01

    In patients with chronic pancreatitis, the pancreaticopleural fistula is known to cause recurrent exudative or hemorrhagic pleural effusions. These are often large in volume and require treatment, unlike the effusions in acute pancreatitis. Diagnosis can be made either by the finding of elevated pleural fluid amylase level or, using imaging studies, by the direct demonstration of the fistulous tract. We report two cases of pancreaticopleural fistula demonstrated by computed tomography.

  3. Edible Astronomy Demonstrations

    Science.gov (United States)

    Lubowich, Donald A.

    2007-12-01

    Astronomy demonstrations with edible ingredients are an effective way to increase student interest and knowledge of astronomical concepts. This approach has been successful with all age groups from elementary school through college students - and the students remember these demonstrations after they are presented. In this poster I describe edible demonstrations I have created to simulate the expansion of the universe (using big-bang chocolate chip cookies); differentiation during the formation of the Earth and planets (using chocolate or chocolate milk with marshmallows, cereal, candy pieces or nuts); and radioactivity/radioactive dating (using popcorn). Other possible demonstrations include: plate tectonics (crackers with peanut butter and jelly); convection (miso soup or hot chocolate); mud flows on Mars (melted chocolate poured over angel food cake); formation of the Galactic disk (pizza); formation of spiral arms (coffee with cream); the curvature of Space (Pringles); constellations patterns with chocolate chips and chocolate chip cookies; planet shaped cookies; star shaped cookies with different colored frostings; coffee or chocolate milk measurement of solar radiation; Oreo cookie lunar phases. Sometimes the students eat the results of the astronomical demonstrations. These demonstrations are an effective teaching tool and can be adapted for cultural, culinary, and ethnic differences among the students.

  4. Continuous Fiber Ceramic Composites

    Energy Technology Data Exchange (ETDEWEB)

    None

    2002-09-01

    Fiber-reinforced ceramic composites demonstrate the high-temperature stability of ceramics--with an increased fracture toughness resulting from the fiber reinforcement of the composite. The material optimization performed under the continuous fiber ceramic composites (CFCC) included a series of systematic optimizations. The overall goals were to define the processing window, to increase the robustinous of the process, to increase process yield while reducing costs, and to define the complexity of parts that could be fabricated.

  5. Solar renovation demonstration projects

    Energy Technology Data Exchange (ETDEWEB)

    Bruun Joergensen, O. [ed.

    1998-10-01

    In the framework of the IEA SHC Programme, a Task on building renovation was initiated, `Task 20, Solar Energy in Building Renovation`. In a part of the task, Subtask C `Design of Solar Renovation Projects`, different solar renovation demonstration projects were developed. The objective of Subtask C was to demonstrate the application of advanced solar renovation concepts on real buildings. This report documents 16 different solar renovation demonstration projects including the design processes of the projects. The projects include the renovation of houses, schools, laboratories, and factories. Several solar techniques were used: building integrated solar collectors, glazed balconies, ventilated solar walls, transparent insulation, second skin facades, daylight elements and photovoltaic systems. These techniques are used in several simple as well as more complex system designs. (au)

  6. Prospects of implant with locking plate in fixation of subtrochanteric fracture: experimental demonstration of its potential benefits on synthetic femur model with supportive hierarchical nonlinear hyperelastic finite element analysis

    Directory of Open Access Journals (Sweden)

    Latifi Mohammed

    2012-04-01

    Full Text Available Abstract Background Effective fixation of fracture requires careful selection of a suitable implant to provide stability and durability. Implant with a feature of locking plate (LP has been used widely for treating distal fractures in femur because of its favourable clinical outcome, but its potential in fixing proximal fractures in the subtrochancteric region has yet to be explored. Therefore, this comparative study was undertaken to demonstrate the merits of the LP implant in treating the subtrochancteric fracture by comparing its performance limits against those obtained with the more traditional implants; angle blade plate (ABP and dynamic condylar screw plate (DCSP. Materials and Methods Nine standard composite femurs were acquired, divided into three groups and fixed with LP (n = 3, ABP (n = 3 and DCSP (n = 3. The fracture was modeled by a 20 mm gap created at the subtrochanteric region to experimentally study the biomechanical response of each implant under both static and dynamic axial loading paradigms. To confirm the experimental findings and to understand the critical interactions at the boundaries, the synthetic femur/implant systems were numerically analyzed by constructing hierarchical finite element models with nonlinear hyperelastic properties. The predictions from the analyses were then compared against the experimental measurements to demonstrate the validity of each numeric model, and to characterize the internal load distribution in the femur and load bearing properties of each implant. Results The average measurements indicated that the constructs with ABP, DCPS and LP respectively had overall stiffness values of 70.9, 110.2 and 131.4 N/mm, and exhibited reversible deformations of 12.4, 4.9 and 4.1 mm when the applied dynamic load was 400 N and plastic deformations of 11.3, 2.4 and 1.4 mm when the load was 1000 N. The corresponding peak cyclic loads to failure were 1100, 1167 and 1600 N. The errors

  7. Demonstrating marketing accountability.

    Science.gov (United States)

    Gombeski, William R; Britt, Jason; Taylor, Jan; Riggs, Karen; Wray, Tanya; Adkins, Wanda; Springate, Suzanne

    2008-01-01

    Pressure on health care marketers to demonstrate effectiveness of their strategies and show their contribution to organizational goals is growing. A seven-tiered model based on the concepts of structure (having the right people, systems), process (doing the right things in the right way), and outcomes (results) is discussed. Examples of measures for each tier are provided and the benefits of using the model as a tool for measuring, organizing, tracking, and communicating appropriate information are provided. The model also provides a framework for helping management understand marketing's value and can serve as a vehicle for demonstrating marketing accountability.

  8. Demonstrating Supernova Remnant Evolution

    Science.gov (United States)

    Leahy, Denis A.; Williams, Jacqueline

    2017-01-01

    We have created a software tool to calculate at display supernova remnant evolution which includes all stages from early ejecta dominated phase to late-time merging with the interstellar medium. The software was created using Python, and can be distributed as Python code, or as an executable file. The purpose of the software is to demonstrate the different phases and transitions that a supernova remnant undergoes, and will be used in upper level undergraduate astrophysics courses as a teaching tool. The usage of the software and its graphical user interface will be demonstrated.

  9. Monty Roberts’ public demonstrations

    NARCIS (Netherlands)

    Loftus, Loni; Marks, Kelly; Jones-McVey, Rosie; Gonzales, Jose L.; Fowler, Veronica L.

    2016-01-01

    Effective training of horses relies on the trainer’s awareness of learning theory and equine ethology, and should be undertaken with skill and time. Some trainers, such as Monty Roberts, share their methods through the medium of public demonstrations. This paper describes the opportunistic analys

  10. Arctic Craft Demonstration Report

    Science.gov (United States)

    2012-11-01

    it received a lot of attention from the local population. Demonstration personnel, both Coast Guard and contractors, were asked to be receptive to...www.uscg.mil/top/missions/ . Counter-Drug Interdiction and Alien Migrant Interdiction operations are currently not included. In the non-Polar regions

  11. Participatory Lecture Demonstrations.

    Science.gov (United States)

    Battino, Rubin

    1979-01-01

    The use of participatory lecture demonstrations in the classroom is described. Examples are given for the following topics: chromatography, chemical kinetics, balancing equations, the gas laws, kinetic molecular theory, Henry's law of gas solubility, electronic energy levels in atoms, and translational, vibrational, and rotational energies of…

  12. Demonstrating the Gas Laws.

    Science.gov (United States)

    Holko, David A.

    1982-01-01

    Presents a complete computer program demonstrating the relationship between volume/pressure for Boyle's Law, volume/temperature for Charles' Law, and volume/moles of gas for Avagadro's Law. The programing reinforces students' application of gas laws and equates a simulated moving piston to theoretical values derived using the ideal gas law.…

  13. Polarized Light: Three Demonstrations.

    Science.gov (United States)

    Goehmann, Ruth; Welty, Scott

    1984-01-01

    Describes three demonstrations used in the Chicago Museum of Science and Industry polarized light show. The procedures employed are suitable for the classroom by using smaller polarizers and an overhead projector. Topic areas include properties of cellophane tape, nondisappearing arrows, and rope through a picket fence. (JN)

  14. Passive damping technology demonstration

    Science.gov (United States)

    Holman, Robert E.; Spencer, Susan M.; Austin, Eric M.; Johnson, Conor D.

    1995-05-01

    A Hughes Space Company study was undertaken to (1) acquire the analytical capability to design effective passive damping treatments and to predict the damped dynamic performance with reasonable accuracy; (2) demonstrate reasonable test and analysis agreement for both baseline and damped baseline hardware; and (3) achieve a 75% reduction in peak transmissibility and 50% reduction in rms random vibration response. Hughes Space Company teamed with CSA Engineering to learn how to apply passive damping technology to their products successfully in a cost-effective manner. Existing hardware was selected for the demonstration because (1) previous designs were lightly damped and had difficulty in vibration test; (2) multiple damping concepts could be investigated; (3) the finite element model, hardware, and test fixture would be available; and (4) damping devices could be easily implemented. Bracket, strut, and sandwich panel damping treatments that met the performance goals were developed by analysis. The baseline, baseline with damped bracket, and baseline with damped strut designs were built and tested. The test results were in reasonable agreement with the analytical predictions and demonstrated that the desired reduction in dynamic response could be achieved. Having successfully demonstrated this approach, it can now be used with confidence for future designs as a means for reducing weight and enhancing reliability.

  15. PHARUS ASAR demonstrator

    NARCIS (Netherlands)

    Smith, A.J.E.; Bree, R.J.P. van; Calkoen, C.J.; Dekker, R.J.; Otten, M.P.G.; Rossum, W.L. van

    2001-01-01

    PHARUS is a polarimetric phased array C-band Synthetic Aperture Radar (SAR), designed and built for airborne use. Advanced SAR (ASAR) data in image and alternating polarization mode have been simulated with PHARUS to demonstrate the use of Envisat for a number of typical SAR applications that are no

  16. Distance Learning Environment Demonstration.

    Science.gov (United States)

    1996-11-01

    The Distance Learning Environment Demonstration (DLED) was a comparative study of distributed multimedia computer-based training using low cost high...measurement. The DLED project provides baseline research in the effective use of distance learning and multimedia communications over a wide area ATM/SONET

  17. Calculus Demonstrations Using MATLAB

    Science.gov (United States)

    Dunn, Peter K.; Harman, Chris

    2002-01-01

    The note discusses ways in which technology can be used in the calculus learning process. In particular, five MATLAB programs are detailed for use by instructors or students that demonstrate important concepts in introductory calculus: Newton's method, differentiation and integration. Two of the programs are animated. The programs and the…

  18. Polarized Light: Three Demonstrations.

    Science.gov (United States)

    Goehmann, Ruth; Welty, Scott

    1984-01-01

    Describes three demonstrations used in the Chicago Museum of Science and Industry polarized light show. The procedures employed are suitable for the classroom by using smaller polarizers and an overhead projector. Topic areas include properties of cellophane tape, nondisappearing arrows, and rope through a picket fence. (JN)

  19. Association of Oxidative Stress and Platelet Receptor Glycoprotein GPIbα and GPVI Shedding During Nonsurgical Bleeding in Heart Failure Patients With Continuous-Flow Left Ventricular Assist Device Support.

    Science.gov (United States)

    Mondal, Nandan K; Chen, Zengsheng; Trivedi, Jaimin R; Sorensen, Erik N; Pham, Si M; Slaughter, Mark S; Griffith, Bartley P; Wu, Zhongjun J

    2017-09-26

    Nonsurgical bleeding (NSB) in heart failure (HF) patients with continuous-flow left ventricular assist device (CF-LVAD) support is the most common clinical complication. The aim of this study was to investigate the association between oxidative stress and platelet glycoproteins GPIbα and GPVI shedding on the incidence of NSB in CF-LVAD patients. Fifty-one HF patients undergoing CF-LVAD implantation and 11 healthy volunteers were recruited. Fourteen patients developed NSB (bleeder group) during 1 month follow-up duration, while others were considered nonbleeder group (n = 37). Several biomarkers of oxidative stress were quantified at baseline and weekly intervals in all patients. Surface expression and plasma elements of platelet receptor glycoproteins GPIbα and GPVI were measured. Oxidative stress biomarkers and platelet GPIbα and GPVI receptor-shedding (decreased surface expression and higher plasma levels) were found to be preexisting conditions in baseline samples of both groups of HF patients when compared with healthy volunteers. Significantly elevated oxidative stress biomarkers and platelet glycoprotein receptor shedding were observed in postimplant bleeder group temporarily when compared with nonbleeder group. Strong significant associations between biomarkers of oxidative stress and platelet glycoprotein receptor shedding were observed, suggesting a possible role of oxidative stress in platelet integrin shedding leading to NSB in CF-LVAD patients. Receiver operating characteristic analyses of GPIbα and GPVI indicated that the likelihood of NSB had a predictive power of bleeding complication in CF-LVAD patients. In conclusion, elevated oxidative stress may play a role in GPIbα and GPVI shedding in the event of NSB. Thus, oxidative stress and GPIbα and GPVI shedding may be used as potential biomarkers for bleeding risk stratification in those patients.

  20. 简直转连续斜箱梁桥单梁静载试验分析%PRESTRESSED REINFORCED CONCRETE SIMPLY SUPPORTED-CONTINUOUS BOX GIRDER SINGLE STATIC LOAD EXPERIMENT AND ANALYSIS

    Institute of Scientific and Technical Information of China (English)

    张宏祥; 曹岩

    2013-01-01

    The single static load experiment is one of the important means to identify whether the bridges can be normal operationed or not during the normal operation period. We can detect whether single static structure performance meets the requirements of design documents and specifications and guarantee the safety of bridge after the completion of the bridge by the single static load experiment This paper unifies some prestressed reinforced concrete box example. It introduced the experiment examination content, the testing sequence, and the test result analysis of the prestressed reinforced concrete box girder simply supported - continuous static load testing. We can make a correct evaluation of prestressed reinforced concrete box girder, and provide the basis for future tests by summarizing the results of static loading test%单梁静载试验是检验桥梁在正常运营期间能否保证桥梁正常运营的一个重要手段,通过对单梁静载试验,检测单梁的结构性能是否达到设计文件和规范要求,保证成桥后桥梁的安全.结合某预应力混凝土斜箱梁实例,介绍预应力钢筋混凝土简直转连续单梁静载试验的检测内容、试验步骤和试验结果分析.总结单梁静载试验结果,对预应力钢筋混凝土简直转连续梁桥作出正确的质量评估,为以后的试验提供理论依据.

  1. IGCC technology and demonstration

    Energy Technology Data Exchange (ETDEWEB)

    Palonen, J. [A. Ahlstrom Corporation, Karhula (Finland). Hans Ahlstrom Lab.; Lundqvist, R.G. [A. Ahlstrom Corporation, Helsinki (Finland); Staahl, K. [Sydkraft AB, Malmoe (Sweden)

    1996-12-31

    Future energy production will be performed by advanced technologies that are more efficient, more environmentally friendly and less expensive than current technologies. Integrated gasification combined cycle (IGCC) power plants have been proposed as one of these systems. Utilising biofuels in future energy production will also be emphasised since this lowers substantially carbon dioxide emissions into the atmosphere due to the fact that biomass is a renewable form of energy. Combining advanced technology and biomass utilisation is for this reason something that should and will be encouraged. A. Ahlstrom Corporation of Finland and Sydkraft AB of Sweden have as one part of company strategies adopted this approach for the future. The companies have joined their resources in developing a biomass-based IGCC system with the gasification part based on pressurised circulating fluidized-bed technology. With this kind of technology electrical efficiency can be substantially increased compared to conventional power plants. As a first concrete step, a decision has been made to build a demonstration plant. This plant, located in Vaernamo, Sweden, has already been built and is now in commissioning and demonstration stage. The system comprises a fuel drying plant, a pressurised CFB gasifier with gas cooling and cleaning, a gas turbine, a waste heat recovery unit and a steam turbine. The plant is the first in the world where the integration of a pressurised gasifier with a gas turbine will be realised utilising a low calorific gas produced from biomass. The capacity of the Vaernamo plant is 6 MW of electricity and 9 MW of district heating. Technology development is in progress for design of plants of sizes from 20 to 120 MWe. The paper describes the Bioflow IGCC system, the Vaernamo demonstration plant and experiences from the commissioning and demonstration stages. (orig.)

  2. The Majorana Demonstrator

    CERN Document Server

    Aguayo, E; Hoppe, E W; Keillor, M E; Kephart, J D; Kouzes, R T; LaFerriere, B D; Merriman, J; Orrell, J L; Overman, N R; Avignone, F T; Back, H O; Combs, D C; Leviner, L E; Young, A R; Barabash, A S; Konovalov, S I; Vanyushin, I; Yumatov, V; Bergevin, M; Chan, Y-D; Detwiler, J A; Loach, J C; Martin, R D; Poon, A W P; Prior, G; Vetter, K; Bertrand, F E; Cooper, R J; Radford, D C; Varner, R L; Yu, C -H; Boswell, M; Elliott, S R; Gehman, V M; Hime, A; Kidd, M F; LaRoque, B H; Rielage, K; Ronquest, M C; Steele, D; Brudanin, V; Egorov, V; Gusey, K; Kochetov, O; Shirchenko, M; Timkin, V; Yakushev, E; Busch, M; Esterline, J; Tornow, W; Christofferson, C D; Horton, M; Howard, S; Sobolev, V; Collar, J I; Fields, N; Creswick, R J; Doe, P J; Johnson, R A; Knecht, A; Leon, J; Marino, M G; Miller, M L; Robertson, R G H; Schubert, A G; Wolfe, B A; Efremenko, Yu; Ejiri, H; Hazama, R; Nomachi, M; Shima, T; Finnerty, P; Fraenkle, F M; Giovanetti, G K; Green, M P; Henning, R; Howe, M A; MacMullin, S; Phillips, D G; Snavely, K J; Strain, J; Vorren, K; Guiseppe, V E; Keller, C; Mei, D -M; Perumpilly, G; Thomas, K; Zhang, C; Hallin, A L; Keeter, K J; Mizouni, L; Wilkerson, J F

    2011-01-01

    A brief review of the history and neutrino physics of double beta decay is given. A description of the MAJORANA DEMONSTRATOR research and development program including background reduction techniques is presented in some detail. The application of point contact (PC) detectors to the experiment is discussed, including the effectiveness of pulse shape analysis. The predicted sensitivity of a PC detector array enriched to 86% in 76Ge is given.

  3. The Majorana Demonstrator

    Energy Technology Data Exchange (ETDEWEB)

    Aguayo, Estanislao; Fast, James E.; Hoppe, Eric W.; Keillor, Martin E.; Kephart, Jeremy D.; Kouzes, Richard T.; LaFerriere, Brian D.; Merriman, Jason H.; Orrell, John L.; Overman, Nicole R.; Avignone, Frank T.; Back, Henning O.; Combs, Dustin C.; Leviner, L.; Young, A.; Barabash, Alexander S.; Konovalov, S.; Vanyushin, I.; Yumatov, Vladimir; Bergevin, M.; Chan, Yuen-Dat; Detwiler, Jason A.; Loach, J. C.; Martin, R. D.; Poon, Alan; Prior, Gersende; Vetter, Kai; Bertrand, F.; Cooper, R. J.; Radford, D. C.; Varner, R. L.; Yu, Chang-Hong; Boswell, M.; Elliott, S.; Gehman, Victor M.; Hime, Andrew; Kidd, M. F.; LaRoque, B. H.; Rielage, Keith; Ronquest, M. C.; Steele, David; Brudanin, V.; Egorov, Viatcheslav; Gusey, K.; Kochetov, Oleg; Shirchenko, M.; Timkin, V.; Yakushev, E.; Busch, Matthew; Esterline, James H.; Tornow, Werner; Christofferson, Cabot-Ann; Horton, Mark; Howard, S.; Sobolev, V.; Collar, J. I.; Fields, N.; Creswick, R.; Doe, Peter J.; Johnson, R. A.; Knecht, A.; Leon, Jonathan D.; Marino, Michael G.; Miller, M. L.; Robertson, R. G. H.; Schubert, Alexis G.; Wolfe, B. A.; Efremenko, Yuri; Ejiri, H.; Hazama, R.; Nomachi, Masaharu; Shima, T.; Finnerty, P.; Fraenkle, Florian; Giovanetti, G. K.; Green, M.; Henning, Reyco; Howe, M. A.; MacMullin, S.; Phillips, D.; Snavely, Kyle J.; Strain, J.; Vorren, Kris R.; Guiseppe, Vincente; Keller, C.; Mei, Dong-Ming; Perumpilly, Gopakumar; Thomas, K.; Zhang, C.; Hallin, A. L.; Keeter, K.; Mizouni, Leila; Wilkerson, J. F.

    2011-09-03

    A brief review of the history and neutrino physics of double beta decay is given. A description of the MAJORANA DEMONSTRATOR research and development program, including background reduction techniques, is presented in some detail. The application of point contact (PC) detectors to the experiment is discussed, including the effectiveness of pulse shape analysis. The predicted sensitivity of a PC detector array enriched to 86% to 76Ge is given.

  4. Continuous Reinforced Concrete Beams

    DEFF Research Database (Denmark)

    Hoang, Cao Linh; Nielsen, Mogens Peter

    1996-01-01

    This report deals with stress and stiffness estimates of continuous reinforced concrete beams with different stiffnesses for negative and positive moments e.g. corresponding to different reinforcement areas in top and bottom. Such conditions are often met in practice.The moment distribution...... at the limit state of serviceability is in some simple cases determined by setting up the statical and the compatibility conditions.With these moment distributions, the maximum deflection and the reinforcement stresses at the span middle and at a support are calculated.The results are compared with results...

  5. Continuous Shearlet Tight Frames

    KAUST Repository

    Grohs, Philipp

    2010-10-22

    Based on the shearlet transform we present a general construction of continuous tight frames for L2(ℝ2) from any sufficiently smooth function with anisotropic moments. This includes for example compactly supported systems, piecewise polynomial systems, or both. From our earlier results in Grohs (Technical report, KAUST, 2009) it follows that these systems enjoy the same desirable approximation properties for directional data as the previous bandlimited and very specific constructions due to Kutyniok and Labate (Trans. Am. Math. Soc. 361:2719-2754, 2009). We also show that the representation formulas we derive are in a sense optimal for the shearlet transform. © 2010 Springer Science+Business Media, LLC.

  6. Learning From Demonstration?

    DEFF Research Database (Denmark)

    Koch, Christian; Bertelsen, Niels Haldor

    2014-01-01

    . This paper reports on an early demonstration project, the Building of a passive house dormitory in the Central Region of Denmark in 2006-2009. The project was supposed to deliver value, lean design, prefabrication, quality in sustainability, certification according to German standards for passive houses...... of control, driven by such challenges as complying with cost goals, the need to choose a German prefab supplier, and local contractors. Energy calculations, indoor climate, issues related to square meter requirements, and the hydrogen element became problematic. The aim to obtain passive house certification...

  7. Learning From Demonstration?

    DEFF Research Database (Denmark)

    Koch, Christian; Bertelsen, Niels Haldor

    2014-01-01

    , and micro combined heat and power using hydrogen. Using sociological and business economic theories of innovation, the paper discusses how early movers of innovation tend to obtain only partial success when demonstrating their products and often feel obstructed by minor details. The empirical work...... encompasses both an evaluation of the design and Construction process as well as a post-occupancy evaluation. Process experiences include the use of a multidisciplinary competence group and performance measurement. The commencement of the project was enthusiastic, but it was forced into more traditional forms...

  8. Visual Electricity Demonstrator

    Science.gov (United States)

    Lincoln, James

    2017-09-01

    The Visual Electricity Demonstrator (VED) is a linear diode array that serves as a dynamic alternative to an ammeter. A string of 48 red light-emitting diodes (LEDs) blink one after another to create the illusion of a moving current. Having the current represented visually builds an intuitive and qualitative understanding about what is happening in a circuit. In this article, I describe several activities for this device and explain how using this technology in the classroom can enhance the understanding and appreciation of physics.

  9. Exploration Medical System Demonstration

    Science.gov (United States)

    Rubin, D. A.; Watkins, S. D.

    2014-01-01

    BACKGROUND: Exploration class missions will present significant new challenges and hazards to the health of the astronauts. Regardless of the intended destination, beyond low Earth orbit a greater degree of crew autonomy will be required to diagnose medical conditions, develop treatment plans, and implement procedures due to limited communications with ground-based personnel. SCOPE: The Exploration Medical System Demonstration (EMSD) project will act as a test bed on the International Space Station (ISS) to demonstrate to crew and ground personnel that an end-to-end medical system can assist clinician and non-clinician crew members in optimizing medical care delivery and data management during an exploration mission. Challenges facing exploration mission medical care include limited resources, inability to evacuate to Earth during many mission phases, and potential rendering of medical care by non-clinicians. This system demonstrates the integration of medical devices and informatics tools for managing evidence and decision making and can be designed to assist crewmembers in nominal, non-emergent situations and in emergent situations when they may be suffering from performance decrements due to environmental, physiological or other factors. PROJECT OBJECTIVES: The objectives of the EMSD project are to: a. Reduce or eliminate the time required of an on-orbit crew and ground personnel to access, transfer, and manipulate medical data. b. Demonstrate that the on-orbit crew has the ability to access medical data/information via an intuitive and crew-friendly solution to aid in the treatment of a medical condition. c. Develop a common data management framework that can be ubiquitously used to automate repetitive data collection, management, and communications tasks for all activities pertaining to crew health and life sciences. d. Ensure crew access to medical data during periods of restricted ground communication. e. Develop a common data management framework that

  10. NAVAJO ELECTRIFICATION DEMONSTRATION PROJECT

    Energy Technology Data Exchange (ETDEWEB)

    Terry W. Battiest

    2008-06-11

    The Navajo Electrification Demonstration Project (NEDP) is a multi-year project which addresses the electricity needs of the unserved and underserved Navajo Nation, the largest American Indian tribe in the United States. The program serves to cumulatively provide off-grid electricty for families living away from the electricty infrastructure, line extensions for unserved families living nearby (less than 1/2 mile away from) the electricity, and, under the current project called NEDP-4, the construction of a substation to increase the capacity and improve the quality of service into the central core region of the Navajo Nation.

  11. Education Demonstration Equipment

    Science.gov (United States)

    Nagy, A.; Lee, R. L.

    2003-10-01

    The General Atomics fusion education program ``Scientist in the Classroom" (SIC) now in its sixth year, uses scientists and engineers to present plasma as a state of matter to students in the classroom. Using hands-on equipment, students see how magnets, gas pressure changes, and different gases are turned into plasmas. A piston, sealed volume, and vacuum chamber illuminate ideal gas laws. Liquid nitrogen is used to explore thermodynamic temperature effects and changes in states of matter. Light bulbs are excited with a Tesla coil to ionize gases, thus becoming an inexpensive plasma devices and a plasma tube shows magnetic interactions with plasma. The demonstration equipment used in this program is built with simple designs and common commercial equipment keeping in mind a teacher's tight budget. The SIC program ( ˜25 school presentations per year) has become very popular and has acquired an enthusiastic group of regular teacher clientele requesting repeat visits. In addition, three very popular and successful ``Build-It" days, sponsored by the General Atomics Fusion Education Outreach Program, enables teachers to build and keep in their classroom some of this equipment. The demonstration devices will be presented along with their ``build-it" details.

  12. Inseparable phone books demonstration

    Science.gov (United States)

    Balta, Nuri; Çetin, Ali

    2017-05-01

    This study is aimed at first introducing a well-known discrepant event; inseparable phone books and second, turning it into an experiment for high school or middle school students. This discrepant event could be used especially to indicate how friction force can be effective in producing an unexpected result. Demonstration, discussion, explanation and experiment steps are presented on how to turn a simple discrepant event into an instructional activity. Results showed the relationships between number of pages and force, as well as between amounts of interleave and force. In addition to these, the mathematical equation for the total force between all interleaved pages is derived. As a conclusion, this study demonstrated that not only can phone books be used, but also ordinary books, to investigate this discrepant event. This experiment can be conducted as an example to show the agreement between theoretical and experimental results along with the confounding variables. This discrepant event can be used to create a cognitive conflict in students’ minds about the concepts of ‘force and motion’ and ‘friction force’.

  13. PFBC Utility Demonstration Project

    Energy Technology Data Exchange (ETDEWEB)

    1992-11-01

    This report provides a summary of activities by American Electric Power Service Corporation during the first budget period of the PFBC Utility Demonstration Project. In April 1990, AEP signed a Cooperative Agreement with the US Department of Energy to repower the Philip Sporn Plant, Units 3 4 in New Haven, West Virginia, with a 330 KW PFBC plant. The purpose of the program was to demonstrate and verify PFBC in a full-scale commercial plant. The technical and cost baselines of the Cooperative Agreement were based on a preliminary engineering and design and a cost estimate developed by AEP subsequent to AEP's proposal submittal in May 1988, and prior to the signing of the Cooperative Agreement. The Statement of Work in the first budget period of the Cooperative Agreement included a task to develop a preliminary design and cost estimate for erecting a Greenfield plant and to conduct a comparison with the repowering option. The comparative assessment of the options concluded that erecting a Greenfield plant rather than repowering the existing Sporn Plant could be the technically and economically superior alternative. The Greenfield plant would have a capacity of 340 MW. The ten additional MW output is due to the ability to better match the steam cycle to the PFBC system with a new balance of plant design. In addition to this study, the conceptual design of the Sporn Repowering led to several items which warranted optimization studies with the goal to develop a more cost effective design.

  14. Smart Grid Demonstration Project

    Energy Technology Data Exchange (ETDEWEB)

    Miller, Craig [National Rural Electric Cooperative Association, Arlington, VA (United States); Carroll, Paul [National Rural Electric Cooperative Association, Arlington, VA (United States); Bell, Abigail [National Rural Electric Cooperative Association, Arlington, VA (United States)

    2015-03-11

    The National Rural Electric Cooperative Association (NRECA) organized the NRECA-U.S. Department of Energy (DOE) Smart Grid Demonstration Project (DE-OE0000222) to install and study a broad range of advanced smart grid technologies in a demonstration that spanned 23 electric cooperatives in 12 states. More than 205,444 pieces of electronic equipment and more than 100,000 minor items (bracket, labels, mounting hardware, fiber optic cable, etc.) were installed to upgrade and enhance the efficiency, reliability, and resiliency of the power networks at the participating co-ops. The objective of this project was to build a path for other electric utilities, and particularly electrical cooperatives, to adopt emerging smart grid technology when it can improve utility operations, thus advancing the co-ops’ familiarity and comfort with such technology. Specifically, the project executed multiple subprojects employing a range of emerging smart grid technologies to test their cost-effectiveness and, where the technology demonstrated value, provided case studies that will enable other electric utilities—particularly electric cooperatives— to use these technologies. NRECA structured the project according to the following three areas: Demonstration of smart grid technology; Advancement of standards to enable the interoperability of components; and Improvement of grid cyber security. We termed these three areas Technology Deployment Study, Interoperability, and Cyber Security. Although the deployment of technology and studying the demonstration projects at coops accounted for the largest portion of the project budget by far, we see our accomplishments in each of the areas as critical to advancing the smart grid. All project deliverables have been published. Technology Deployment Study: The deliverable was a set of 11 single-topic technical reports in areas related to the listed technologies. Each of these reports has already been submitted to DOE, distributed to co-ops, and

  15. Fuel Cell Demonstration Program

    Energy Technology Data Exchange (ETDEWEB)

    Gerald Brun

    2006-09-15

    In an effort to promote clean energy projects and aid in the commercialization of new fuel cell technologies the Long Island Power Authority (LIPA) initiated a Fuel Cell Demonstration Program in 1999 with six month deployments of Proton Exchange Membrane (PEM) non-commercial Beta model systems at partnering sites throughout Long Island. These projects facilitated significant developments in the technology, providing operating experience that allowed the manufacturer to produce fuel cells that were half the size of the Beta units and suitable for outdoor installations. In 2001, LIPA embarked on a large-scale effort to identify and develop measures that could improve the reliability and performance of future fuel cell technologies for electric utility applications and the concept to establish a fuel cell farm (Farm) of 75 units was developed. By the end of October of 2001, 75 Lorax 2.0 fuel cells had been installed at the West Babylon substation on Long Island, making it the first fuel cell demonstration of its kind and size anywhere in the world at the time. Designed to help LIPA study the feasibility of using fuel cells to operate in parallel with LIPA's electric grid system, the Farm operated 120 fuel cells over its lifetime of over 3 years including 3 generations of Plug Power fuel cells (Lorax 2.0, Lorax 3.0, Lorax 4.5). Of these 120 fuel cells, 20 Lorax 3.0 units operated under this Award from June 2002 to September 2004. In parallel with the operation of the Farm, LIPA recruited government and commercial/industrial customers to demonstrate fuel cells as on-site distributed generation. From December 2002 to February 2005, 17 fuel cells were tested and monitored at various customer sites throughout Long Island. The 37 fuel cells operated under this Award produced a total of 712,635 kWh. As fuel cell technology became more mature, performance improvements included a 1% increase in system efficiency. Including equipment, design, fuel, maintenance

  16. Jennings Demonstration PLant

    Energy Technology Data Exchange (ETDEWEB)

    Russ Heissner

    2010-08-31

    Verenium operated a demonstration plant with a capacity to produce 1.4 million gallons of cellulosic ethanol from agricultural resiues for about two years. During this time, the plant was able to evaluate the technical issues in producing ethanol from three different cellulosic feedstocks, sugar cane bagasse, energy cane, and sorghum. The project was intended to develop a better understanding of the operating parameters that would inform a commercial sized operation. Issues related to feedstock variability, use of hydrolytic enzymes, and the viability of fermentative organisms were evaluated. Considerable success was achieved with pretreatment processes and use of enzymes but challenges were encountered with feedstock variability and fermentation systems. Limited amounts of cellulosic ethanol were produced.

  17. Force Allocation Modeling in Support of Contingency Operations - Demonstration Study.

    Science.gov (United States)

    2007-11-02

    a in task t for mission m • Capu = total number of units of type u available for assignment • Cu = cost for each unit u deployed The model to...x^ < Capu for each unit u (3.3) m x^ > 0 integer for each (u, m) pair (3.4) (3.1) represents the objective of minimizing system cost. We...scenario s • Ratsm = minimum requirement of action a in task t for mission m, scenario s 14 • Capu = total number of units of type u available for

  18. LFR Demonstrator Materials Viability

    Energy Technology Data Exchange (ETDEWEB)

    Caro, M

    2006-08-02

    Interest in fast reactor development has increased with the Department of Energy's introduction of the Global Nuclear Energy Partnership (GNEP) [1]. The GNEP program plans development of a sodium cooled Advanced Burner Reactor (ABR) that can be used to reduce the amount spent LWR fuel in storage and the number of high level waste sites needed for expansion of nuclear power throughout the world over the 21st century. In addition, the program proposes to make nuclear power more available while reducing the proliferation concerns by revising policies and technology for control of weapons useable materials. This would be accomplished with establishment of new institutional arrangements based on selective siting of reprocessing, enrichment and waste disposal facilities. The program would also implement development of small reactors suitable for use in developing countries or remote regions with small power grids. Over the past several years, under the Department of Energy (DOE) NERI and GEN IV programs research has been conducted on small lead cooled reactors. The Small Secure Transportable Autonomous Reactor (SSTAR) [2] is the most recent version of this type of reactor and research is continuing on it in the GEN IV program in parallel with GNEP. SSTAR is a small (10MWe-100MWe) reactor that is fueled once for life. It complements the GNEP program very well in that it serves one of the world markets not currently addressed by large reactors and its development requirements are similar to those for the ABRs. In particular, the fuel and structural materials for these fast spectrum reactors share common thermal and neutron environments. The coolants, sodium in ABR and lead or lead-bismuth eutectic (LBE) in SSTAR, are the major developmental difference. This report discusses the status of structural materials for fast reactor core and primary system components and selected aspects of their development.

  19. Smart Sensor Demonstration Payload

    Science.gov (United States)

    Schmalzel, John; Bracey, Andrew; Rawls, Stephen; Morris, Jon; Turowski, Mark; Franzl, Richard; Figueroa, Fernando

    2010-01-01

    Sensors are a critical element to any monitoring, control, and evaluation processes such as those needed to support ground based testing for rocket engine test. Sensor applications involve tens to thousands of sensors; their reliable performance is critical to achieving overall system goals. Many figures of merit are used to describe and evaluate sensor characteristics; for example, sensitivity and linearity. In addition, sensor selection must satisfy many trade-offs among system engineering (SE) requirements to best integrate sensors into complex systems [1]. These SE trades include the familiar constraints of power, signal conditioning, cabling, reliability, and mass, and now include considerations such as spectrum allocation and interference for wireless sensors. Our group at NASA s John C. Stennis Space Center (SSC) works in the broad area of integrated systems health management (ISHM). Core ISHM technologies include smart and intelligent sensors, anomaly detection, root cause analysis, prognosis, and interfaces to operators and other system elements [2]. Sensor technologies are the base fabric that feed data and health information to higher layers. Cost-effective operation of the complement of test stands benefits from technologies and methodologies that contribute to reductions in labor costs, improvements in efficiency, reductions in turn-around times, improved reliability, and other measures. ISHM is an active area of development at SSC because it offers the potential to achieve many of those operational goals [3-5].

  20. NASA Bioreactor Demonstration System

    Science.gov (United States)

    2002-01-01

    Leland W. K. Chung (left), Director, Molecular Urology Therapeutics Program at the Winship Cancer Institute at Emory University, is principal investigator for the NASA bioreactor demonstration system (BDS-05). With him is Dr. Jun Shu, an assistant professor of Orthopedics Surgery from Kuming Medical University China. The NASA Bioreactor provides a low turbulence culture environment which promotes the formation of large, three-dimensional cell clusters. Due to their high level of cellular organization and specialization, samples constructed in the bioreactor more closely resemble the original tumor or tissue found in the body. The Bioreactor is rotated to provide gentle mixing of fresh and spent nutrient without inducing shear forces that would damage the cells. The work is sponsored by NASA's Office of Biological and Physical Research. The bioreactor is managed by the Biotechnology Cell Science Program at NASA's Johnson Space Center (JSC). NASA-sponsored bioreactor research has been instrumental in helping scientists to better understand normal and cancerous tissue development. In cooperation with the medical community, the bioreactor design is being used to prepare better models of human colon, prostate, breast and ovarian tumors. Cartilage, bone marrow, heart muscle, skeletal muscle, pancreatic islet cells, liver and kidney are just a few of the normal tissues being cultured in rotating bioreactors by investigators. Credit: Emory University.

  1. Tidd PFBC demonstration project

    Energy Technology Data Exchange (ETDEWEB)

    Marrocco, M. [American Electric Power, Columbus, OH (United States)

    1997-12-31

    The Tidd project was one of the first joint government-industry ventures to be approved by the US Department of Energy (DOE) in its Clean Coal Technology Program. In March 1987, DOE signed an agreement with the Ohio Power Company, a subsidiary of American Electric Power, to refurbish the then-idle Tidd plant on the banks of the Ohio River with advanced pressurized fluidized bed technology. Testing ended after 49 months of operation, 100 individual tests, and the generation of more than 500,000 megawatt-hours of electricity. The demonstration plant has met its objectives. The project showed that more than 95 percent of sulfur dioxide pollutants could be removed inside the advanced boiler using the advanced combustion technology, giving future power plants an attractive alternative to expensive, add-on scrubber technology. In addition to its sulfur removal effectiveness, the plant`s sustained periods of steady-state operation boosted its availability significantly above design projections, heightening confidence that pressurized fluidized bed technology will be a reliable, baseload technology for future power plants. The technology also controlled the release of nitrogen oxides to levels well below the allowable limits set by federal air quality standards. It also produced a dry waste product that is much easier to handle than wastes from conventional power plants and will likely have commercial value when produced by future power plants.

  2. Supplemental grant to continue cooperative agreements with 10 predictor variables grantees and their research coordinating center. CSAP, SAMHSA, HHS. Supplement to support an additional year of intervention follow-up and data collection among the Predictor Variables by Developmental Stage grantees and their Research Coordinating Center.

    Science.gov (United States)

    1999-04-29

    This notice is to inform the public that an estimated $1.65 million will be available to support up to 11 supplemental awards to 10 existing Predictor Variables Study Sites and one existing Research Coordinating Center in FY 1999. The purpose of the award is to support enhancement of current programs and allow the collection and analyses of additional follow-up data for children currently included in these studies. CSAP will make the awards based on the recommendations of the initial review group and the CSAP National Advisory Council. Supplemental awards will be made in Fiscal Year 1999, by September 30, 1999. The studies funded under this supplement are projected to end September 30, 2000. Eligibility is limited to existing SAMHSA/CSAP's Predictor Variables by Developmental Stage study sites, and their Research Coordinating Center. All currently active Predictor Variables grantees are eligible to apply for supplemental funds under this GFA. Given the short implementation time frame and limited funds available for this activity, as well as existing research protocols that limit the scope of new activities that could be introduced at this point in the study, the existing Predictor Variables projects are the only projects that can effectively implement the required booster sessions and follow-up data collection activities. These studies have already demonstrated that they can make a positive impact on children within selected developmental parameters. It is important to document that this impact on these same children can be maintained as they enter the next developmental stages. The Research Coordinating Center has put considerable effort into developing cross-site rapport and collecting process data from the individual sites; an effort that would be redundant and not cost-effective if attempted by another entity at this point in the project. Additionally, it is important to the continuity of the study that the Research Coordinating Center be able to continue its

  3. Airway support using a pediatric intubation tube in adult patients with atrial fibrillation: A simple and unique method to prevent heart movement during catheter ablation under continuous deep sedation

    Directory of Open Access Journals (Sweden)

    Masateru Takigawa, MD

    2017-08-01

    Conclusion: This unique airway management technique using a pediatric intubation tube for CA procedures performed in adult patients with AF under continuous deep sedation was easy, safe, and effective.

  4. Does continuous trusted adult support in childhood impart life-course resilience against adverse childhood experiences - a retrospective study on adult health-harming behaviours and mental well-being.

    Science.gov (United States)

    Bellis, Mark A; Hardcastle, Katie; Ford, Kat; Hughes, Karen; Ashton, Kathryn; Quigg, Zara; Butler, Nadia

    2017-03-23

    Adverse childhood experiences (ACEs) including child abuse and household problems (e.g. domestic violence) increase risks of poor health and mental well-being in adulthood. Factors such as having access to a trusted adult as a child may impart resilience against developing such negative outcomes. How much childhood adversity is mitigated by such resilience is poorly quantified. Here we test if access to a trusted adult in childhood is associated with reduced impacts of ACEs on adoption of health-harming behaviours and lower mental well-being in adults. Cross-sectional, face-to-face household surveys (aged 18-69 years, February-September 2015) examining ACEs suffered, always available adult (AAA) support from someone you trust in childhood and current diet, smoking, alcohol consumption and mental well-being were undertaken in four UK regions. Sampling used stratified random probability methods (n = 7,047). Analyses used chi squared, binary and multinomial logistic regression. Adult prevalence of poor diet, daily smoking and heavier alcohol consumption increased with ACE count and decreased with AAA support in childhood. Prevalence of having any two such behaviours increased from 1.8% (0 ACEs, AAA support, most affluent quintile of residence) to 21.5% (≥4 ACEs, lacking AAA support, most deprived quintile). However, the increase was reduced to 7.1% with AAA support (≥4 ACEs, most deprived quintile). Lower mental well-being was 3.27 (95% CIs, 2.16-4.96) times more likely with ≥4 ACEs and AAA support from someone you trust in childhood (vs. 0 ACE, with AAA support) increasing to 8.32 (95% CIs, 6.53-10.61) times more likely with ≥4 ACEs but without AAA support in childhood. Multiple health-harming behaviours combined with lower mental well-being rose dramatically with ACE count and lack of AAA support in childhood (adjusted odds ratio 32.01, 95% CIs 18.31-55.98, ≥4 ACEs, without AAA support vs. 0 ACEs, with AAA support). Adverse childhood experiences

  5. Test and Demonstration Assets of New Mexico

    Energy Technology Data Exchange (ETDEWEB)

    None

    2008-03-31

    This document was developed by the Arrowhead Center of New Mexico State University as part of the National Security Preparedness Project (NSPP), funded by a DOE/NNSA grant. The NSPP has three primary components: business incubation, workforce development, and technology demonstration and validation. The document contains a survey of test and demonstration assets in New Mexico available for external users such as small businesses with security technologies under development. Demonstration and validation of national security technologies created by incubator sources, as well as other sources, are critical phases of technology development. The NSPP will support the utilization of an integrated demonstration and validation environment.

  6. Expedited demonstration of molten salt mixed waste treatment technology. Addendum 1

    Energy Technology Data Exchange (ETDEWEB)

    Holtz, E.H. von; Hopper, R.W.; Adamson, M.G.

    1995-04-27

    The Final Forms portion (Section 4) of the TTP SF-2410-03 final report was incomplete. This was noted under the subsection ``Task Variances.`` The present report documents the work that was unfinished at that time, arranged in accord with the subsections of the Final Report. An assessment of the overall immobilization efficacy of polymer microencapsulation, as supported by this study, has been added. The study and demonstration of the polyethylene microencapsulation of salt residues is continuing under other auspices. A stand-alone report combining the results of the continuation with the contents of this memorandum and of Section 4 of the Final Report will be issued in later this year.

  7. "If I Wasn't Learning Anything New about Teaching I Would Have Left It by Now!": How History Teachers Can Support Their Own and Others' Continued Professional Learning

    Science.gov (United States)

    Burn, Katharine

    2012-01-01

    Katharine Burn has a long-standing interest in history teachers' professional learning--not just the ways in which experienced teachers can support beginners, but how teachers at all stages of their career can be encouraged to go developing their practice. In this article, which draws on a number of small-scale research projects, she illustrates…

  8. LANL continuity of operations plan

    Energy Technology Data Exchange (ETDEWEB)

    Senutovitch, Diane M [Los Alamos National Laboratory

    2010-12-22

    The Los Alamos National Laboratory (LANL) is a premier national security research institution, delivering scientific and engineering solutions for the nation's most crucial and complex problems. Our primary responsibility is to ensure the safety, security, and reliability of the nation's nuclear stockpile. LANL emphasizes worker safety, effective operational safeguards and security, and environmental stewardship, outstanding science remains the foundation of work at the Laboratory. In addition to supporting the Laboratory's core national security mission, our work advances bioscience, chemistry, computer science, earth and environmental sciences, materials science, and physics disciplines. To accomplish LANL's mission, we must ensure that the Laboratory EFs continue to be performed during a continuity event, including localized acts of nature, accidents, technological or attack-related emergencies, and pandemic or epidemic events. The LANL Continuity of Operations (COOP) Plan documents the overall LANL COOP Program and provides the operational framework to implement continuity policies, requirements, and responsibilities at LANL, as required by DOE 0 150.1, Continuity Programs, May 2008. LANL must maintain its ability to perform the nation's PMEFs, which are: (1) maintain the safety and security of nuclear materials in the DOE Complex at fixed sites and in transit; (2) respond to a nuclear incident, both domestically and internationally, caused by terrorist activity, natural disaster, or accident, including mobilizing the resources to support these efforts; and (3) support the nation's energy infrastructure. This plan supports Continuity of Operations for Los Alamos National Laboratory (LANL). This plan issues LANL policy as directed by the DOE 0 150.1, Continuity Programs, and provides direction for the orderly continuation of LANL EFs for 30 days of closure or 60 days for a pandemic/epidemic event. Initiation of COOP operations may

  9. Continuous Lunches Are Not Free

    OpenAIRE

    Vose, Michael D.

    2015-01-01

    Stemming from a paper of Auger and Teytaud, there is a common misconception that for continuous domains No Free Lunch (NFL) does not hold. However, Rowe, Vose, and Wright have demonstrated that NFL holds for arbitrary domains and co-domains. This paper resolves the apparent contradiction.

  10. Unconditional Continuous Variable Dense Coding

    CERN Document Server

    Ralph, T C

    2002-01-01

    We investigate the conditions under which unconditional dense coding can be achieved using continuous variable entanglement. We consider the effect of entanglement impurity and detector efficiency and discuss experimental verification. We conclude that the requirements for a strong demonstration are not as stringent as previously thought and are within the reach of present technology.

  11. Evaluating preceptor perception of support using educational podcasts.

    Science.gov (United States)

    Blum, Cynthia A

    2014-03-11

    After their initial training, preceptors report a lack of ongoing support specifically in dealing with preceptor-identified areas of unsafe practice: the inability to demonstrate knowledge and skills, attitude problems, unprofessional behavior, and poor communication skills. The purpose of this staff development study was to test the use of educational technology in the form of podcasts, demonstrating how a preceptor could constructively approach difficult situations using caring behaviors to engage novice nurses and to examine the relationship between preceptor support and role commitment. A correlational research design was used to examine the effects of the podcasts, continuously available through common web sites. Findings include a significant increase in the preceptor's perception of support especially among participants who had less training or experience with precepting. A strong correlation between the preceptor's perception of support and commitment to their role was also demonstrated. Preceptors suggest development of additional podcasts for ongoing educational support.

  12. Biogas and reduction of organic matter in anaerobic reactor with continuous flow means support; Producao de biogas e reducao de materia organica em reatores anaerobicos de fluxo continuo com meio suporte

    Energy Technology Data Exchange (ETDEWEB)

    Kunzler, Kathia Regina; Gomes, Simone Damasceno; Goncalves, Jefferson Luiz; Kuczman, Osvaldo [Universidade Estadual do Oeste do Parana (PGEAGRI/UNIOESTE), Cascavel, PR (Brazil). Programa de Pos-Graduacao em Engenharia Agricola], Emails: kathiark@yahoo.com.br, simoned@unioeste.br; Piana, Pitagoras Augusto [Universidade Estadual do Oeste do Parana (UNIOESTE), Toledo, PR (Brazil)

    2010-07-01

    Starch processing industries are to obtain cassava starch. Its main residue is the effluent resulting from pressing the roots, Manipueira, high organic load and toxic. In this study, we compared the removal efficiency of organic loading and biogas production in anaerobic reactors, with the support means bamboo in different relations width: height. The first lesion diameter of 15 cm and a length of 90 cm, a ratio 1:6 and the second with a diameter of 20 cm and 60 cm long, ratio of 1:3. The support medium consisted of rings of bamboo with 10 cm length and diameters between 1.7 and 2.5 cm. The loads applied were 0.519, 1.156, 1.471, 3.813, 4.347, 4.708 and 5.601gDQO/L.day. To evaluate the removal efficiency of organic matter, the samples were subjected to analysis of DQO biogas production was assessed in terms of organic load removed. Bamboo as a support allowed the application of higher loads. The higher efficiency in the production of biogas was produced in the reactor with the highest ratio width: height, being more significant for the organic load of 5, 601 gCOD/L.day, showing more stability this. (author)

  13. Marketing Plan for Demonstration and Validation Assets

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2008-05-30

    The National Security Preparedness Project (NSPP), is to be sustained by various programs, including technology demonstration and evaluation (DEMVAL). This project assists companies in developing technologies under the National Security Technology Incubator program (NSTI) through demonstration and validation of technologies applicable to national security created by incubators and other sources. The NSPP also will support the creation of an integrated demonstration and validation environment. This report documents the DEMVAL marketing and visibility plan, which will focus on collecting information about, and expanding the visibility of, DEMVAL assets serving businesses with national security technology applications in southern New Mexico.

  14. Buried Waste Integrated Demonstration Plan. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    Kostelnik, K.M.

    1991-12-01

    This document presents the plan of activities for the Buried Waste Integrated Demonstration (BWID) program which supports the environmental restoration (ER) objectives of the Department of Energy (DOE) Complex. Discussed in this plan are the objectives, organization, roles and responsibilities, and the process for implementing and managing BWID. BWID is hosted at the Idaho National Engineering Laboratory (INEL), but involves participants from throughout the DOE Complex, private industry, universities, and the international community. These participants will support, demonstrate, and evaluate a suite of advanced technologies representing a comprehensive remediation system for the effective and efficient remediation of buried waste. The processes for identifying technological needs, screening candidate technologies for applicability and maturity, selecting appropriate technologies for demonstration, field demonstrating, evaluation of results and transferring technologies to environmental restoration programs are also presented. This document further describes the elements of project planning and control that apply to BWID. It addresses the management processes, operating procedures, programmatic and technical objectives, and schedules. Key functions in support of each demonstration such as regulatory coordination, safety analyses, risk evaluations, facility requirements, and data management are presented.

  15. [Community-based rehabilitation and outpatient care for patients with acquired brain injury and chronic neurological disability in Germany: continuing support for social participation and re-integration in the neurological care system?].

    Science.gov (United States)

    Reuther, P; Hendrich, A; Kringler, W; Vespo, E

    2012-12-01

    In Germany a number of patients who are suffering from acquired brain injury and chronic neurological disability are either undersupplied or exposed to inappropriate care in their social environment. The number of these patients is increasing due to the changes in the procedures of care and due to demographic factors. While acute medical care and early rehabilitative treatment is accessible throughout the German health care system the necessary multimodal and competent care is rare or absent in the social participative sites such as life and occupational environments of the patients. The complex impairment of the brain, the central organ for sensorial, executive and other cognitive functions of human beings, renders the affected patient an exception in the system of medical and social care - this has only inadequately been considered in the past. The authors explain the necessity to disclose the status of a "human-with acquired-brain damage (Mensch-mit-erworbener-Hirnschädigung, MeH)" explicitly as severely disabled. The paper recommends a number of structural and procedural elements that have proven to overcome the insufficient or inappropriate support in integrating the patients suffering from acquired brain injury and chronic neurological disability in their social environment as well as for a demand-focused support with sustainable rehabilitative and ambulant follow-up procedures. Comparisons with other developed health care systems and international guidelines show that with organizing of early-supported-discharge, community-ambulation, shared-care and community-based-rehabilitation these problems have long since been identified elsewhere. Community-based and resident-oriented concepts have already been systematically implemented. In order to achieve the necessary support for the individual patient, a nation-wide development is necessary in Germany to perform the principles of the German social code and the principles of the Convention on the Rights of

  16. Rapid Energy Modeling Workflow Demonstration

    Science.gov (United States)

    2013-10-31

    sustainable building . Models produced through the REM process can be updated and accessed continually, thus allowing energy managers to continuously explore...time and cost of audits 4. Review the energy analysis findings under the High Performance and Sustainable Building Guiding Principles Compliance

  17. Monolithic Microwave Integrated Circuit (MMIC) Phased Array Demonstrated With ACTS

    Science.gov (United States)

    1996-01-01

    Monolithic Microwave Integrated Circuit (MMIC) arrays developed by the NASA Lewis Research Center and the Air Force Rome Laboratory were demonstrated in aeronautical terminals and in mobile or fixed Earth terminals linked with NASA's Advanced Communications Technology Satellite (ACTS). Four K/Ka-band experimental arrays were demonstrated between May 1994 and May 1995. Each array had GaAs MMIC devices at each radiating element for electronic beam steering and distributed power amplification. The 30-GHz transmit array used in uplinks to ACTS was developed by Lewis and Texas Instruments. The three 20-GHz receive arrays used in downlinks from ACTS were developed in cooperation with the Air Force Rome Laboratory, taking advantage of existing Air Force integrated-circuit, active-phased-array development contracts with the Boeing Company and Lockheed Martin Corporation. Four demonstrations, each related to an application of high interest to both commercial and Department of Defense organizations, were conducted. The location, type of link, and the data rate achieved for each of the applications is shown. In one demonstration-- an aeronautical terminal experiment called AERO-X--a duplex voice link between an aeronautical terminal on the Lewis Learjet and ACTS was achieved. Two others demonstrated duplex voice links (and in one case, interactive video links as well) between ACTS and an Army high-mobility, multipurpose wheeled vehicle (HMMWV, or "humvee"). In the fourth demonstration, the array was on a fixed mount and was electronically steered toward ACTS. Lewis served as project manager for all demonstrations and as overall system integrator. Lewis engineers developed the array system including a controller for open-loop tracking of ACTS during flight and HMMWV motion, as well as a laptop data display and recording system used in all demonstrations. The Jet Propulsion Laboratory supported the AERO-X program, providing elements of the ACTS Mobile Terminal. The successful

  18. 论构建互动持续综合支持戒毒(康复)模式%ABOUT THE ESTABLISHING OF DRUG DETOXIFICATION AND REHABILITATION MODEL WITH INTERACTIVE, CONTINUOUS AND COMPREHENSIVE SUPPORT

    Institute of Scientific and Technical Information of China (English)

    孙安清

    2011-01-01

    本文从复吸毒品的多因素分析为切入点,探索强化决心、互动帮教、家庭协同、社会综合、同伴互助、适时跟进支持等方法,构建持续综合支持戒毒康复模式,以改变过去较单一的戒毒康复模式,提高戒毒康复效果,降低复吸率.%This paper cut - in with the analysis of the reasons for drug relapse explained the model of drug detoxification and rehabilitation with the skills of strengthening motivation, interactive education, family cooperation, social integration, peer education, timely follow -up support to make changes in the former treatment methods. The aim is to improve drug treatment effects and reduce drug relapse.

  19. Clean Coal Technology Demonstration Program: Program update 1993

    Energy Technology Data Exchange (ETDEWEB)

    1994-03-01

    The Clean Coal Technology Demonstration Program (also referred to as the CCT Program) is a $6.9 billion cost-shared industry/government technology development effort. The program is to demonstrate a new generation of advanced coal-based technologies, with the most promising technologies being moved into the domestic and international marketplace. Technology has a vital role in ensuring that coal can continue to serve U.S. energy interests and enhance opportunities for economic growth and employment while meeting the national committment to a clean and healthy global environment. These technologies are being advanced through the CCT Program. The CCT Program supports three substantive national objectives: ensuring a sustainable environment through technology; enhancing energy efficiency and reliability; providing opportunities for economic growth and employment. The technologies being demonstrated under the CCT Program reduce the emissions of sulfur oxides, nitrogen oxides, greenhouse gases, hazardous air pollutants, solid and liquid wastes, and other emissions resulting from coal use or conversion to other fuel forms. These emissions reductions are achieved with efficiencies greater than or equal to currently available technologies.

  20. A narrow pH range supports butanol, hexanol, and octanol production from syngas in a continuous co-culture of Clostridium ljungdahlii and Clostridium kluyveri with in-line product extraction

    Directory of Open Access Journals (Sweden)

    Hanno Richter

    2016-11-01

    Full Text Available Carboxydotrophic bacteria (CTB have received attention due to their ability to synthesize commodity chemicals from producer gas and synthesis gas (syngas. CTB have an important advantage of a high product selectivity compared to chemical catalysts. However, the product spectrum of wild-type CTB is narrow. Our objective was to investigate whether a strategy of combining two wild-type bacterial strains into a single, continuously fed bioprocessing step would be promising to broaden the product spectrum. Here, we have operated a syngas-fermentation process with Clostridium ljungdahlii and Clostridium kluyveri with in-line product extraction through gas stripping and product condensing within the syngas recirculation line. The main products from C. ljungdahlii fermentation at a pH of 6.0 were ethanol and acetate at net volumetric production rates of 65.5 and 431 mmol C•L-1•d-1, respectively. An estimated 2/3 of total ethanol produced was utilized by C. kluyveri to chain elongate with the reverse β-oxidation pathway, resulting in n-butyrate and n-caproate at net rates of 129 and 70 mmol C•L-1•d-1, respectively. C. ljungdahlii likely reduced the produced carboxylates to their corresponding alcohols with the reductive power from syngas. This resulted in the longer-chain alcohols n-butanol, n-hexanol, and n-octanol at net volumetric production rates of 39.2, 31.7, and 0.045 mmol C•L-1•d-1, respectively. The continuous production of the longer-chain alcohols occurred only within a narrow pH spectrum of 5.7-6.4 due to the pH discrepancy between the two strains. Regardless whether other wild-type strains could overcome this pH discrepancy, the specificity (mol carbon in product per mol carbon in all other liquid products for each longer-chain alcohol may never be high in a single bioprocessing step. This, because two bioprocesses compete for intermediates (i.e., carboxylates: 1 chain elongation; and 2 biological reduction. This innate

  1. A thought-provoking demonstration

    Science.gov (United States)

    Cowley, E. Roger; Holton, Brian; Horton, George K.

    1998-01-01

    We present and discuss a physics demonstration, similar to, but distinct from, the ballistic-pendulum demonstration, one that illustrates all three conservation laws of mechanics (for energy, momentum, and angular momentum) simultaneously.

  2. Teleoperation for learning by demonstration

    DEFF Research Database (Denmark)

    Kukliński, Kamil; Fischer, Kerstin; Marhenke, Ilka

    2014-01-01

    Learning by demonstration is a useful technique to augment a robot's behavioral inventory, and teleoperation allows lay users to demonstrate novel behaviors intuitively to the robot. In this paper, we compare two modes of teleoperation of an industrial robot, the demonstration by means of a data...... glove and by means of a control object (peg). Experiments with 16 lay users, performing assembly task on the Cranfield benchmark objects, show that the control peg leads to more success, more efficient demonstration and fewer errors....

  3. Teleoperation for learning by demonstration

    DEFF Research Database (Denmark)

    Kukliński, Kamil; Fischer, Kerstin; Marhenke, Ilka;

    2014-01-01

    Learning by demonstration is a useful technique to augment a robot's behavioral inventory, and teleoperation allows lay users to demonstrate novel behaviors intuitively to the robot. In this paper, we compare two modes of teleoperation of an industrial robot, the demonstration by means of a data...... glove and by means of a control object (peg). Experiments with 16 lay users, performing assembly task on the Cranfield benchmark objects, show that the control peg leads to more success, more efficient demonstration and fewer errors....

  4. Doula birth support for incarcerated pregnant women.

    Science.gov (United States)

    Schroeder, Carole; Bell, Janice

    2005-01-01

    The objective of this study was to provide trained labor support (doulas) to pregnant women in jail. A multiagency intervention project provided doula birth services to pregnant women in urban jails. Program evaluation included interviews with women and written satisfaction surveys of providers and correctional officers. A convenience sample of 18 incarcerated women received doula services. A doula visited each woman in jail antepartum to review expectations for labor and birth; during hospitalization, the doula provided continuous support throughout labor and birth. Doulas visited women postpartum to review birth events. Surveys administered to providers and officers demonstrated high satisfaction with the program. Qualitative interviews with 14 women indicated unanimous support for the services and documented women's major concerns. Findings support offering doula services to all pregnant women in custody and expanding doula services to include early and comprehensive intervention coordinated by nurses.

  5. Discretization of Continuous Frame

    Indian Academy of Sciences (India)

    A Fattahi; H Javanshiri

    2012-05-01

    In this paper we consider the notion of continuous frame of subspaces and define a new concept of continuous frame, entitled continuous atomic resolution of identity, for arbitrary Hilbert space $\\mathcal{H}$ which has a countable reconstruction formula. Among the other results, we characterize the relationship between this new concept and other known continuous frames. Finally, we state and prove the assertions of the stability of perturbation in this concept.

  6. Continuous Markovian Logics

    DEFF Research Database (Denmark)

    Mardare, Radu Iulian; Cardelli, Luca; Larsen, Kim Guldstrand

    2012-01-01

    Continuous Markovian Logic (CML) is a multimodal logic that expresses quantitative and qualitative properties of continuous-time labelled Markov processes with arbitrary (analytic) state-spaces, henceforth called continuous Markov processes (CMPs). The modalities of CML evaluate the rates of the ...

  7. Plants under continuous light

    NARCIS (Netherlands)

    Velez Ramirez, A.I.; Ieperen, van W.; Vreugdenhill, D.; Millenaar, F.F.

    2011-01-01

    Continuous light is an essential tool for understanding the plant circadian clock. Additionally, continuous light might increase greenhouse food production. However, using continuous light in research and practice has its challenges. For instance, most of the circadian clock-oriented experiments wer

  8. Buried Waste Integrated Demonstration stakeholder involvement model

    Energy Technology Data Exchange (ETDEWEB)

    Kaupanger, R.M.; Kostelnik, K.M.; Milam, L.M.

    1994-04-01

    The Buried Waste Integrated Demonstration (BWID) is a program funded by the US Department of Energy (DOE) Office of Technology Development. BWID supports the applied research, development, demonstration, and evaluation of a suite of advanced technologies that together form a comprehensive remediation system for the effective and efficient remediation of buried waste. Stakeholder participation in the DOE Environmental Management decision-making process is critical to remediation efforts. Appropriate mechanisms for communication with the public, private sector, regulators, elected officials, and others are being aggressively pursued by BWID to permit informed participation. This document summarizes public outreach efforts during FY-93 and presents a strategy for expanded stakeholder involvement during FY-94.

  9. Development and Demonstration of Ultrafiltration Simulants

    Energy Technology Data Exchange (ETDEWEB)

    Russell, Renee L.; Billing, Justin M.; Peterson, Reid A.; Rinehart, Donald E.; Smith, Harry D.

    2009-02-24

    According to Bechtel National, Inc. (BNI) Test Specification 24590-PTF-TSP-RT-06-006, Rev 0, Simulant Development to Support the Development and Demonstration of Leaching and Ultrafiltration Pretreatment Processes,” simulants for boehmite, gibbsite, and filtration are to be developed that can be used in subsequent bench and integrated testing of the leaching/filtration processes for the waste treatment plant (WTP). These simulants will then be used to demonstrate the leaching process and to help refine processing conditions which may impact safety basis considerations (Smith 2006). This report documents the results of the filtration simulant development.

  10. Environmental management technology demonstration and commercialization

    Energy Technology Data Exchange (ETDEWEB)

    Daly, D.J.; Erickson, T.A.; Groenewold, G.H. [Energy & Environmental Research Center, Grand Forks, ND (United States)] [and others

    1995-10-01

    The Energy & Environmental Research Center (EERC), a contract-supported organization focused on technology research, development, demonstration, and commercialization (RDD&C), is entering its second year of a Cooperative Agreement with the U.S. Department of Energy (DOE) Morgantown Energy Technology Center (METC) to facilitate the development, demonstration, and commercialization of innovative environmental management (EM) technologies in support of the activities of DOE`s Office of Environmental Science and Technology (EM-50) under DOE`s EM Program. This paper reviews the concept and approach of the program under the METC-EERC EM Cooperative Agreement and profiles the role the program is playing in the commercialization of five EM technologies.

  11. Laser Communications Relay Demonstration Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Laser Communications Relay Demonstration project will advance optical communications technology, expanding industry’s capability to produce competitive,...

  12. Preparation Of A 100 F Supercapacitor Demonstrator

    Energy Technology Data Exchange (ETDEWEB)

    Barbieri, O.; Hahn, M.; Gallay, R. [Maxwell SA(Switzerland); Koetz, R.

    2005-03-01

    Within the Top Nano 21 project 'Synthesis of supported, nano structured, high porosity carbon as electrode material', a cooperation with the University Fribourg, EMPA in Duebendorf, Maxwell Technologies SA in Rossens and Timcal SA in Bodio, we investigated and optimized different carbons as electrode materials for supercapacitors. As a deliverable in this project a demonstrator was successfully built and tested. (author)

  13. Continuous evaluation of evolving behavioral intervention technologies.

    Science.gov (United States)

    Mohr, David C; Cheung, Ken; Schueller, Stephen M; Hendricks Brown, C; Duan, Naihua

    2013-10-01

    Behavioral intervention technologies (BITs) are web-based and mobile interventions intended to support patients and consumers in changing behaviors related to health, mental health, and well-being. BITs are provided to patients and consumers in clinical care settings and commercial marketplaces, frequently with little or no evaluation. Current evaluation methods, including RCTs and implementation studies, can require years to validate an intervention. This timeline is fundamentally incompatible with the BIT environment, where technology advancement and changes in consumer expectations occur quickly, necessitating rapidly evolving interventions. However, BITs can routinely and iteratively collect data in a planned and strategic manner and generate evidence through systematic prospective analyses, thereby creating a system that can "learn." A methodologic framework, Continuous Evaluation of Evolving Behavioral Intervention Technologies (CEEBIT), is proposed that can support the evaluation of multiple BITs or evolving versions, eliminating those that demonstrate poorer outcomes, while allowing new BITs to be entered at any time. CEEBIT could be used to ensure the effectiveness of BITs provided through deployment platforms in clinical care organizations or BIT marketplaces. The features of CEEBIT are described, including criteria for the determination of inferiority, determination of BIT inclusion, methods of assigning consumers to BITs, definition of outcomes, and evaluation of the usefulness of the system. CEEBIT offers the potential to collapse initial evaluation and postmarketing surveillance, providing ongoing assurance of safety and efficacy to patients and consumers, payers, and policymakers.

  14. A Comprehensive General Chemistry Demonstration

    Science.gov (United States)

    Sweeder, Ryan D.; Jeffery, Kathleen A.

    2013-01-01

    This article describes the use of a comprehensive demonstration suitable for a high school or first-year undergraduate introductory chemistry class. The demonstration involves placing a burning candle in a container adjacent to a beaker containing a basic solution with indicator. After adding a lid, the candle will extinguish and the produced…

  15. Teaching and Demonstrating Classical Conditioning.

    Science.gov (United States)

    Sparrow, John; Fernald, Peter

    1989-01-01

    Discusses classroom demonstrations of classical conditioning and notes tendencies to misrepresent Pavlov's procedures. Describes the design and construction of the conditioner that is used for demonstrating classical conditioning. Relates how students experience conditioning, generalization, extinction, discrimination, and spontaneous recovery.…

  16. A Comprehensive General Chemistry Demonstration

    Science.gov (United States)

    Sweeder, Ryan D.; Jeffery, Kathleen A.

    2013-01-01

    This article describes the use of a comprehensive demonstration suitable for a high school or first-year undergraduate introductory chemistry class. The demonstration involves placing a burning candle in a container adjacent to a beaker containing a basic solution with indicator. After adding a lid, the candle will extinguish and the produced…

  17. Optics Demonstrations Using Cylindrical Lenses

    Science.gov (United States)

    Ivanov, Dragia; Nikolov, Stefan

    2015-01-01

    In this paper we consider the main properties of cylindrical lenses and propose several demonstrational experiments that can be performed with them. Specifically we use simple glasses full of water to demonstrate some basic geometrical optics principles and phenomena. We also present some less standard experiments that can be performed with such…

  18. Confined zone dispersion flue gas desulfurization demonstration

    Energy Technology Data Exchange (ETDEWEB)

    1993-01-15

    This is the sixth quarterly report for this project and it covers work performed on Phase 3a of the project from February 1, 1992 through April 30, 1992. Extension of the parametric test period through June 1992 provides an opportunity to regain most of the schedule slippage, but only if the modifications needed for continuous operation of the CZD system are installed concurrent with the extended test period. These modifications include automation of the lime preparation and transfer system, automatic injection control, and related instrumentation and controls as necessary to integrate the operation of the CZD system with Seward Station Boiler No. 15. Early installation of these modifications would permit testing, debugging and adjustment of the automatic control system during the parametric test period. Results of current testing indicate that considerable testing and adjustment will be required to optimize operation of the CZD system after it is automated for continuous operation. Therefore, we intend to incorporate in Phase 3a(parametric testing) the system modifications needed for continuous automatic operation that were originally included in Phase 3b. Phase 3b would then be limited only to the one-year continuous demonstration.

  19. Demonstrative and non-demonstrative reasoning by analogy

    OpenAIRE

    Ippoliti, Emiliano

    2008-01-01

    The paper analizes a set of issues related to analogy and analogical reasoning, namely: 1) The problem of analogy and its duplicity; 2) The role of analogy in demonstrative reasoning; 3) The role of analogy in non-demonstrative reasoning; 4) The limits of analogy; 5) The convergence, particularly in multiple analogical reasoning, of these two apparently distinct aspects and its methodological and philosophical consequences. The paper, using example from number theory, argues for an heuristc c...

  20. Continuity in Discrete Sets

    CERN Document Server

    Burgin, Mark

    2010-01-01

    Continuous models used in physics and other areas of mathematics applications become discrete when they are computerized, e.g., utilized for computations. Besides, computers are controlling processes in discrete spaces, such as films and television programs. At the same time, continuous models that are in the background of discrete representations use mathematical technology developed for continuous media. The most important example of such a technology is calculus, which is so useful in physics and other sciences. The main goal of this paper is to synthesize continuous features and powerful technology of the classical calculus with the discrete approach of numerical mathematics and computational physics. To do this, we further develop the theory of fuzzy continuous functions and apply this theory to functions defined on discrete sets. The main interest is the classical Intermediate Value theorem. Although the result of this theorem is completely based on continuity, utilization of a relaxed version of contin...

  1. On barely continuous functions

    Directory of Open Access Journals (Sweden)

    Richard Stephens

    1988-01-01

    Full Text Available The term barely continuous is a topological generalization of Baire-1 according to F. Gerlits of the Mathematical Institute of the Hungarian Academy of Sciences, and thus worthy of further study. This paper compares barely continuous functions and continuous functions on an elementary level. Knowing how the continuity of the identity function between topologies on a given set yields the lattice structure for those topologies, the barely continuity of the identity function between topologies on a given set is investigated and used to add to the structure of that lattice. Included are certain sublattices generated by the barely continuity of the identity function between those topologies. Much attention is given to topologies on finite sets.

  2. Cutting Out Continuations

    DEFF Research Database (Denmark)

    Bahr, Patrick; Hutton, Graham

    2016-01-01

    In the field of program transformation, one often transforms programs into continuation-passing style to make their flow of control explicit, and then immediately removes the resulting continuations using defunctionalisation to make the programs first-order. In this article, we show how these two...... transformations can be fused together into a single transformation step that cuts out the need to first introduce and then eliminate continuations. Our approach is calculational, uses standard equational reasoning techniques, and is widely applicable....

  3. Business Continuity Management Plan

    Science.gov (United States)

    2014-12-01

    uninterrupted power supply WSS Weapons System Support xvi THIS PAGE INTENTIONALLY LEFT BLANK xvii ACKNOWLEDGMENTS We...equipment, including components supporting ReMAD, is linked to an uninterruptible power supply (UPS) that can provide 45 minutes to 1 hour of power during...Framework.pdf Hynosky, J. (2010). Naval Supply Systems Command (NAVSUP), Weapon Systems Support (WSS) Allowancing power point presentation. Power

  4. Manufacturing Demonstration Facility: Low Temperature Materials Synthesis

    Energy Technology Data Exchange (ETDEWEB)

    Graham, David E. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Moon, Ji-Won [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Armstrong, Beth L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Datskos, Panos G. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Duty, Chad E. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Gresback, Ryan [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Ivanov, Ilia N. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Jacobs, Christopher B. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Jellison, Gerald Earle [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Jang, Gyoung Gug [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Joshi, Pooran C. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Jung, Hyunsung [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Meyer, III, Harry M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Phelps, Tommy [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2015-06-30

    The Manufacturing Demonstration Facility (MDF) low temperature materials synthesis project was established to demonstrate a scalable and sustainable process to produce nanoparticles (NPs) for advanced manufacturing. Previous methods to chemically synthesize NPs typically required expensive, high-purity inorganic chemical reagents, organic solvents and high temperatures. These processes were typically applied at small laboratory scales at yields sufficient for NP characterization, but insufficient to support roll-to-roll processing efforts or device fabrication. The new NanoFermentation processes described here operated at a low temperature (~60 C) in low-cost, aqueous media using bacteria that produce extracellular NPs with controlled size and elemental stoichiometry. Up-scaling activities successfully demonstrated high NP yields and quality in a 900-L pilot-scale reactor, establishing this NanoFermentation process as a competitive biomanufacturing strategy to produce NPs for advanced manufacturing of power electronics, solid-state lighting and sensors.

  5. Offsite demonstrations for MWLID technologies

    Energy Technology Data Exchange (ETDEWEB)

    Williams, C. [Sandia National Labs., Albuquerque, NM (United States); Gruebel, R. [Tech. Reps., Inc., Albuquerque, NM (United States)

    1995-04-01

    The goal of the Offsite Demonstration Project for Mixed Waste Landfill Integrated Demonstration (MWLID)-developed environmental site characterization and remediation technologies is to facilitate the transfer, use, and commercialization of these technologies to the public and private sector. The meet this goal, the project identified environmental restoration needs of mixed waste and/or hazardous waste landfill owners (Native American, municipal, DOE, and DoD); documenting potential demonstration sites and the contaminants present at each site; assessing the environmental regulations that would effect demonstration activities; and evaluating site suitability for demonstrating MWLID technologies at the tribal and municipal sites identified. Eighteen landfill sites within a 40.2-km radius of Sandia National Laboratories are listed on the CERCLIS Site/Event Listing for the state of New Mexico. Seventeen are not located within DOE or DoD facilities and are potential offsite MWLID technology demonstration sites. Two of the seventeen CERCLIS sites, one on Native American land and one on municipal land, were evaluated and identified as potential candidates for off-site demonstrations of MWLID-developed technologies. Contaminants potentially present on site include chromium waste, household/commercial hazardous waste, volatile organic compounds, and petroleum products. MWLID characterization technologies applicable to these sites include Magnetometer Towed Array, Cross-borehole Electromagnetic Imaging, SitePlanner {trademark}/PLUME, Hybrid Directional Drilling, Seamist{trademark}/Vadose Zone Monitoring, Stripping Analyses, and x-ray Fluorescence Spectroscopy for Heavy Metals.

  6. Crafting a Gauss Gun Demonstration

    Science.gov (United States)

    Blodgett, Matthew E.; Blodgett, E. D.

    2006-12-01

    A Gauss Gun launches a ferromagnetic projectile using a pulsed electromagnet. This demonstration provides a nice counterpoint to the popular Thompson's jumping ring demonstration, which launches a nonferromagnetic ring via repulsion of an induced current. The pulsed current must be short enough in duration so that the projectile is not retarded by lingering current in the launch solenoid, but also large enough to provide a suitably impressive velocity. This project involved an iterative design process, as we worked through balancing all the different design criteria. We recommend it as a very nice electronics design project which will produce a very portable and enjoyable demonstration. AAPT sponsor Earl Blodgett.

  7. Intergovernmental Advanced Stationary PEM Fuel Cell System Demonstration Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Rich Chartrand

    2011-08-31

    A program to complete the design, construction and demonstration of a PEMFC system fuelled by Ethanol, LPG or NG for telecom applications was initiated in October 2007. Early in the program the economics for Ethanol were shown to be unfeasible and permission was given by DOE to focus on LPG only. The design and construction of a prototype unit was completed in Jun 2009 using commercially available PEM FC stack from Ballard Power Systems. During the course of testing, the high pressure drop of the stack was shown to be problematic in terms of control and stability of the reformer. Also, due to the power requirements for air compression the overall efficiency of the system was shown to be lower than a similar system using internally developed low pressure drop FC stack. In Q3 2009, the decision was made to change to the Plug power stack and a second prototype was built and tested. Overall net efficiency was shown to be 31.5% at 3 kW output. Total output of the system is 6 kW. Using the new stack hardware, material cost reduction of 63% was achieved over the previous Alpha design. During a November 2009 review meeting Plug Power proposed and was granted permission, to demonstrate the new, commercial version of Plug Power's telecom system at CERL. As this product was also being tested as part of a DOE Topic 7A program, this part of the program was transferred to the Topic 7A program. In Q32008, the scope of work of this program was expanded to include a National Grid demonstration project of a micro-CHP system using hightemperature PEM technology. The Gensys Blue system was cleared for unattended operation, grid connection, and power generation in Aug 2009 at Union College in NY state. The system continues to operate providing power and heat to Beuth House. The system is being continually evaluated and improvements to hardware and controls will be implemented as more is learned about the system's operation. The program is instrumental in improving the

  8. TRIDEC Natural Crisis Management Demonstrator for Tsunamis

    Science.gov (United States)

    Hammitzsch, M.; Necmioglu, O.; Reißland, S.; Lendholt, M.; Comoglu, M.; Ozel, N. M.; Wächter, J.

    2012-04-01

    The management of natural crises is an important application field of the technology developed in the project Collaborative, Complex, and Critical Decision-Support in Evolving Crises (TRIDEC), co-funded by the European Commission in its Seventh Framework Programme. TRIDEC is based on the development of the German Indonesian Tsunami Early Warning System (GITEWS) and the Distant Early Warning System (DEWS) providing a service platform for both sensor integration and warning dissemination. In TRIDEC new developments in Information and Communication Technology (ICT) are used to extend the existing platform realising a component-based technology framework for building distributed tsunami warning systems for deployment, e.g. in the North-eastern Atlantic, the Mediterranean and Connected Seas (NEAM) region. The Kandilli Observatory and Earthquake Research Institute (KOERI), representing the Tsunami National Contact (TNC) and Tsunami Warning Focal Point (TWFP) for Turkey, is one of the key partners in TRIDEC. KOERI is responsible for the operation of a National Tsunami Warning Centre (NTWC) for Turkey and establishes Candidate Tsunami Watch Provider (CTWP) responsibilities for the NEAM region. Based on this profound experience, KOERI is contributing valuable requirements to the overall TRIDEC system and is responsible for the definition and development of feasible tsunami-related scenarios. However, KOERI's most important input focuses on testing and evaluating the TRIDEC system according to specified evaluation and validation criteria. The TRIDEC system will be implemented in three phases, each with a demonstrator. Successively, the demonstrators are addressing challenges, such as the design and implementation of a robust and scalable service infrastructure supporting the integration and utilisation of existing resources with accelerated generation of large volumes of data. These include sensor systems, geo-information repositories, simulation tools and data fusion tools

  9. Let Continuous Outcome Variables Remain Continuous

    Directory of Open Access Journals (Sweden)

    Enayatollah Bakhshi

    2012-01-01

    Full Text Available The complementary log-log is an alternative to logistic model. In many areas of research, the outcome data are continuous. We aim to provide a procedure that allows the researcher to estimate the coefficients of the complementary log-log model without dichotomizing and without loss of information. We show that the sample size required for a specific power of the proposed approach is substantially smaller than the dichotomizing method. We find that estimators derived from proposed method are consistently more efficient than dichotomizing method. To illustrate the use of proposed method, we employ the data arising from the NHSI.

  10. CT Demonstration of Caput Medusae

    Science.gov (United States)

    Weber, Edward C.; Vilensky, Joel A.

    2009-01-01

    Maximum intensity and volume rendered CT displays of caput medusae are provided to demonstrate both the anatomy and physiology of this portosystemic shunt associated with portal hypertension. (Contains 2 figures.)

  11. Status of the MAJORANA Demonstrator

    CERN Document Server

    Cuesta, C; Arnquist, I J; Avignone, F T; Barabash, A S; Bertrand, F E; Brudanin, V; Busch, M; Buuck, M; Byram, D; Caldwell, A S; Chan, Y-D; Christofferson, C D; Detwiler, J A; Efremenko, Yu; Ejiri, H; Elliott, S R; Galindo-Uribarri, A; Giovanetti, G K; Goett, J; Greenn, M P; Gruszko, J; Guinn, I S; Guiseppe, V E; Henning, R; Hoppe, E W; Howard, S; Howe, M A; Jasinski, B R; Keeter, K J; Kidd, M F; Konovalov, S I; Kouzes, R T; LaFerriere, B D; Leon, J; MacMullin, J; Martin, R D; Meijer, S J; Mertens, S; Orrell, J L; O'Shaughnessy, C; Overman, N R; Poon, A W P; Radford, D C; Rager, J; Rielage, K; Robertson, R G H; Romero-Romero, E; Schmitt, C; Shanks, B; Shirchenko, M; Snyder, N; Suriano, A M; Tedeschi, D; Timkin, V; Trimble, J E; Varner, R L; Vasilyev, S; Vetter, K; Vorren, K; White, B R; Wilkerson, J F; Wiseman, C; Xu, W; Yakushev, E; Yu, C -H; Yumatov, V

    2014-01-01

    The MAJORANA Collaboration is constructing the MAJORANA Demonstrator, an ultra-low background, 40-kg modular high purity Ge detector array to search for neutrinoless double-beta decay in Ge. In view of the next generation of tonne-scale Ge-based neutrinoless double-beta decay searches that will probe the neutrino mass scale in the inverted-hierarchy region, a major goal of the Demonstrator is to demonstrate a path forward to achieving a background rate at or below 1 count/tonne/year in the 4 keV region of interest around the Q-value at 2039 keV. The current status of the Demonstrator is discussed, as are plans for its completion.

  12. Demonstration of Cauchy: Understanding Algebraic

    Directory of Open Access Journals (Sweden)

    T.L. Costa

    2012-11-01

    Full Text Available ABSTRACT: In this study we present some considerations about the End of Course Work undergraduate Full Degree in Mathematics / UFMT, drafted in 2011, and by taking title "A story about Cauchy and Euler's theorem on polyhedra" that gave birth to our research project Master of Education, begun in 2012, on the approaches of Euler's theorem on polyhedra in mathematics textbooks. At work in 2011 presented some considerations about the history of Euler's theorem for polyhedra which focus the demonstration presented by Cauchy (1789-1857, who tries to generalize it, relying on assumptions not observable in Euclidean geometry. Therefore, we seek the accessible literature on the history of mathematics; relate some aspects of the demonstration Cauchy with historical events on the development of mathematics in the nineteenth century, which allowed the acceptance of such a demonstration by mathematicians of his time.Keywords: History of Mathematics. Euler's Theorem on Polyhedra. Demonstration of Cauchy.

  13. Status of the Majorana Demonstrator

    Energy Technology Data Exchange (ETDEWEB)

    Cuesta, C.; Abgrall, N.; Arnquist, Isaac J.; Avignone, Frank T.; Barabash, Alexander S.; Bertrand, F.; Brudanin, V.; Busch, Matthew; Buuck, M.; Byram, D.; Caldwell, A. S.; Chan, Yuen-Dat; Christofferson, Cabot-Ann; Detwiler, Jason A.; Efremenko, Yuri; Ejiri, H.; Elliott, S. R.; Galindo-Uribarri, A.; Giovanetti, G. K.; Goett, J.; Green, M. P.; Gruszko, J.; Guinn, I.; Guiseppe, V. E.; Henning, R.; Hoppe, Eric W.; Howard, Stanley; Howe, M. A.; Jasinski, B. R.; Keeter, K.; Kidd, M. F.; Konovalov, S.; Kouzes, Richard T.; Laferriere, Brian D.; Leon, Jonathan D.; MacMullin, J.; Martin, R. D.; Meijer, S. J.; Mertens, S.; Orrell, John L.; O' Shaughnessy, C.; Overman, Nicole R.; Poon, Alan; Radford, D. C.; Rager, J.; Rielage, Keith; Robertson, R. G. H.; Romero-Romero, E.; Schmitt, C.; Shanks, B.; Shirchenko, M.; Snyder, N.; Suriano, Anne-Marie; Tedeschi, D.; Timkin, V.; Trimble, J. E.; Varner, R. L.; Vasilyev, Sergey; Vetter, Kai; Vorren, Kris R.; White, Brandon R.; Wilkerson, J. F.; Wiseman, C.; Xu, W.; Yakushev, E.; Yu, Chang-Hong; Yumatov, Vladimir

    2015-06-09

    The Majorana Collaboration is constructing the Majorana Demonstrator, an ultra-low background, 40-kg modular high purity Ge detector array to search for neutrinoless double-beta decay in 76Ge. In view of the next generation of tonne-scale Ge-based neutrinoless double-beta decay searches that will probe the neutrino mass scale in the inverted hierarchy region, a major goal of the Demonstrator is to demonstrate a path forward to achieving a background rate at or below 1 count/tonne/year in the 4 keV region of interest around the Q-value at 2039 keV. The current status of the Demonstrator is discussed, as are plans for its completion.

  14. Teacher Training: The Demonstration Lesson

    Science.gov (United States)

    Moore, Alan C.

    1977-01-01

    A teacher training technique is discussed involving a demonstration class given by a local teacher and observed by prospective teachers. After the class a discussion is held analyzing lesson content and teaching techniques. (CHK)

  15. Fuel Gas Demonstration Plant Program. Volume I. Demonstration plant

    Energy Technology Data Exchange (ETDEWEB)

    1979-01-01

    The objective of this project is for Babcock Contractors Inc. (BCI) to provide process designs, and gasifier retort design for a fuel gas demonstration plant for Erie Mining Company at Hoyt Lake, Minnesota. The fuel gas produced will be used to supplement natural gas and fuel oil for iron ore pellet induration. The fuel gas demonstration plant will consist of five stirred, two-stage fixed-bed gasifier retorts capable of handling caking and non-caking coals, and provisions for the installation of a sixth retort. The process and unit design has been based on operation with caking coals; however, the retorts have been designed for easy conversion to handle non-caking coals. The demonstration unit has been designed to provide for expansion to a commercial plant (described in Commercial Plant Package) in an economical manner.

  16. Residential Continuing Education.

    Science.gov (United States)

    Houle, Cyril O.

    The theme of this discursive essay is residential continuing education: its definition, its development along somewhat different lines in Europe and in America, and its practice in university centers in the United States. Continuing education includes any learning or teaching program that is based on the assumptions that the learners have studied…

  17. On continued fraction algorithms

    NARCIS (Netherlands)

    Smeets, Ionica

    2010-01-01

    Is there a good continued fraction approximation between every two bad ones? What is the entropy of the natural extension for alpha-Rosen fractions? How do you find multi-dimensional continued fractions with a guaranteed quality in polynomial time? These, and many more, questions are answered in thi

  18. On continued fraction algorithms

    NARCIS (Netherlands)

    Smeets, Ionica

    2010-01-01

    Is there a good continued fraction approximation between every two bad ones? What is the entropy of the natural extension for alpha-Rosen fractions? How do you find multi-dimensional continued fractions with a guaranteed quality in polynomial time? These, and many more, questions are answered in thi

  19. Slant Borehole Demonstration Summary Report

    Energy Technology Data Exchange (ETDEWEB)

    GARDNER, M.G.

    2000-07-19

    This report provides a summary of the demonstration project for development of a slant borehole to retrieve soil samples from beneath the SX-108 single-shell tank. It provides a summary of the findings from the demonstration activities and recommendations for tool selection and methods to deploy into the SX Tank Farm. Daily work activities were recorded on Drilling and Sampling Daily Work Record Reports. The work described in this document was performed during March and April 2000.

  20. Orcc's Compa-Backend demonstration

    OpenAIRE

    Oliva, Yaset; Casseau, Emmanuel; Martin, Kevin; Bomel, Pierre; Diguet, Jean-Philippe; Yviquel, Hervé; Raulet, Mickael; Raffin, Erwan; Morin, Laurent

    2014-01-01

    International audience; This paper presents the implementation of a video decoding application starting from its dataflow and CAL representations. Our objective is to demonstrate the ability of the Open RVC-CAL Compiler (Orcc) to generate code for embedded systems. For the demonstration, the video application will be an MPEG-4 Part2 decoder. The targeted architecture is a multi-core heterogeneous system deployed onto the Zynq platform from Xilinx.

  1. Advanced Demonstration and Test Reactor Options Study

    Energy Technology Data Exchange (ETDEWEB)

    Petti, David Andrew [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hill, R. [Argonne National Lab. (ANL), Argonne, IL (United States); Gehin, J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Gougar, Hans David [Idaho National Lab. (INL), Idaho Falls, ID (United States); Strydom, Gerhard [Idaho National Lab. (INL), Idaho Falls, ID (United States); Heidet, F. [Argonne National Lab. (ANL), Argonne, IL (United States); Kinsey, J. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Grandy, Christopher [Argonne National Lab. (ANL), Argonne, IL (United States); Qualls, A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Brown, Nicholas [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Powers, J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Hoffman, E. [Argonne National Lab. (ANL), Argonne, IL (United States); Croson, D. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2017-01-01

    Global efforts to address climate change will require large-scale decarbonization of energy production in the United States and elsewhere. Nuclear power already provides 20% of electricity production in the United States (U.S.) and is increasing in countries undergoing rapid growth around the world. Because reliable, grid-stabilizing, low emission electricity generation, energy security, and energy resource diversity will be increasingly valued, nuclear power’s share of electricity production has a potential to grow. In addition, there are non electricity applications (e.g., process heat, desalination, hydrogen production) that could be better served by advanced nuclear systems. Thus, the timely development, demonstration, and commercialization of advanced nuclear reactors could diversify the nuclear technologies available and offer attractive technology options to expand the impact of nuclear energy for electricity generation and non-electricity missions. The purpose of this planning study is to provide transparent and defensible technology options for a test and/or demonstration reactor(s) to be built to support public policy, innovation and long term commercialization within the context of the Department of Energy’s (DOE’s) broader commitment to pursuing an “all of the above” clean energy strategy and associated time lines. This planning study includes identification of the key features and timing needed for advanced test or demonstration reactors to support research, development, and technology demonstration leading to the commercialization of power plants built upon these advanced reactor platforms. This planning study is consistent with the Congressional language contained within the fiscal year 2015 appropriation that directed the DOE to conduct a planning study to evaluate “advanced reactor technology options, capabilities, and requirements within the context of national needs and public policy to support innovation in nuclear energy

  2. South Africa: defiance campaign continues.

    Science.gov (United States)

    2002-03-01

    The Treatment Action Campaign (TAC) has continued its "defiance campaign against patent abuse and AIDS profiteering." In partnership with Médecins Sans Frontières (Doctors Without Borders), and with the support of Oxfam and the Council of South African Trade Unions (COSATU), on 28 January 2002 three TAC members returned to South Africa from Brazil carrying generic versions of the antiretroviral drugs zidovudine (AZT), lamivudine (3TC), and nevirapine (NVP). Some of the imported capsules contain a combination of AZT and 3TC.

  3. All-optical delay technique for supporting multiple antennas in a hybrid optical - wireless transmission system

    DEFF Research Database (Denmark)

    Prince, Kamau; Chiuchiarelli, A; Presi, M

    2008-01-01

    We introduce a novel continuously-variable optical delay technique to support beam-forming wireless communications systems using antenna arrays. We demonstrate delay with 64-QAM modulated signals at a rate of 15 Msymbol/sec with 2.5 GHz carrier frequency.......We introduce a novel continuously-variable optical delay technique to support beam-forming wireless communications systems using antenna arrays. We demonstrate delay with 64-QAM modulated signals at a rate of 15 Msymbol/sec with 2.5 GHz carrier frequency....

  4. Demonstration of Active Combustion Control

    Science.gov (United States)

    Lovett, Jeffrey A.; Teerlinck, Karen A.; Cohen, Jeffrey M.

    2008-01-01

    The primary objective of this effort was to demonstrate active control of combustion instabilities in a direct-injection gas turbine combustor that accurately simulates engine operating conditions and reproduces an engine-type instability. This report documents the second phase of a two-phase effort. The first phase involved the analysis of an instability observed in a developmental aeroengine and the design of a single-nozzle test rig to replicate that phenomenon. This was successfully completed in 2001 and is documented in the Phase I report. This second phase was directed toward demonstration of active control strategies to mitigate this instability and thereby demonstrate the viability of active control for aircraft engine combustors. This involved development of high-speed actuator technology, testing and analysis of how the actuation system was integrated with the combustion system, control algorithm development, and demonstration testing in the single-nozzle test rig. A 30 percent reduction in the amplitude of the high-frequency (570 Hz) instability was achieved using actuation systems and control algorithms developed within this effort. Even larger reductions were shown with a low-frequency (270 Hz) instability. This represents a unique achievement in the development and practical demonstration of active combustion control systems for gas turbine applications.

  5. Patient adherence to multi-component continuing care discharge plans.

    Science.gov (United States)

    Proctor, Steven L; Wainwright, Jaclyn L; Herschman, Philip L

    2017-09-01

    Intuitively, it is assumed that greater patient adherence to treatment recommendations in substance use disorder (SUD) treatment is associated with favorable outcomes, but surprisingly, there is limited research systematically examining the adherence-outcome relationship in the context of the continuing care phase post-discharge from residential treatment. This study sought to determine the effect of adherence to multi-component continuing care plans on long-term outcomes among patients following the primary treatment episode. Data were abstracted from electronic medical records for 271 patients (59.0% male) discharged from a U.S. residential program between 2013 and 2015. Patients were categorized based on their level of adherence to their individualized continuing care discharge plan, and studied through retrospective record review for 12months post-discharge. 12-month outcomes included past 30-day and continuous abstinence, re-admission, and quality of life. With the exception of re-admission rate, fully adherent patients demonstrated significantly better results on all study outcomes at 12months compared to patients who were partially or non-adherent. Fully adherent patients were 9.46 times (95% CI: 5.07-17.62) more likely to be continuously abstinent through 12months relative to the other adherence groups. Fully adherent patients were 7.53 times (95% CI: 2.41-23.50) more likely to report a positive quality of life at 12months relative to the other adherence groups. The findings support the widely held contention that greater adherence to continuing care discharge plans is associated with favorable long-term outcomes, and provide insight into realistic outcomes expectations for patients who are adherent to their multi-component continuing care discharge plans. Copyright © 2017 Elsevier Inc. All rights reserved.

  6. Demonstration of blind quantum computing.

    Science.gov (United States)

    Barz, Stefanie; Kashefi, Elham; Broadbent, Anne; Fitzsimons, Joseph F; Zeilinger, Anton; Walther, Philip

    2012-01-20

    Quantum computers, besides offering substantial computational speedups, are also expected to preserve the privacy of a computation. We present an experimental demonstration of blind quantum computing in which the input, computation, and output all remain unknown to the computer. We exploit the conceptual framework of measurement-based quantum computation that enables a client to delegate a computation to a quantum server. Various blind delegated computations, including one- and two-qubit gates and the Deutsch and Grover quantum algorithms, are demonstrated. The client only needs to be able to prepare and transmit individual photonic qubits. Our demonstration is crucial for unconditionally secure quantum cloud computing and might become a key ingredient for real-life applications, especially when considering the challenges of making powerful quantum computers widely available.

  7. SECURES: Austin, Texas demonstration results

    Science.gov (United States)

    Lewis, Glynn; Shaw, Scott; Scharf, Peter; Stellingworth, Bob

    2003-09-01

    The Law Enforcement technology development community has a growing interest in the technologies associated with gunshot detection and localization. These interests revolve around community-oriented policing. Technologies of interest include those associated with muzzle blast and bullet shockwave detection and the inter-netting of these acoustic sensors with electro-optic sensors. To date, no one sensor technology has proven totally effective for a complete solution. PSI has a muzzle blast detection and localization product which is wireless, highly mobile and reconfigurable, with a user-friendly laptop processor and display unit, which completed a one-year demonstration in Austin, Texas on July 6, 2002. This demonstration was conducted under a Cooperative Agreement with the National Institute of Justice and in cooperation with the Austin Police Department. This paper will discuss the details of the demonstrations, provide a summarized evaluation, elucidate the lessons learned, make recommendations for future deployments and discuss the developmental directions indicated for the future.

  8. Propane Vehicle Demonstration Grant Program

    Energy Technology Data Exchange (ETDEWEB)

    Jack Mallinger

    2004-08-27

    Project Description: Propane Vehicle Demonstration Grants The Propane Vehicle Demonstration Grants was established to demonstrate the benefits of new propane equipment. The US Department of Energy, the Propane Education & Research Council (PERC) and the Propane Vehicle Council (PVC) partnered in this program. The project impacted ten different states, 179 vehicles, and 15 new propane fueling facilities. Based on estimates provided, this project generated a minimum of 1,441,000 new gallons of propane sold for the vehicle market annually. Additionally, two new off-road engines were brought to the market. Projects originally funded under this project were the City of Portland, Colorado, Kansas City, Impco Technologies, Jasper Engines, Maricopa County, New Jersey State, Port of Houston, Salt Lake City Newspaper, Suburban Propane, Mutual Liquid Propane and Ted Johnson.

  9. Impact of Continuous Competition on Operations and Support Costs

    Science.gov (United States)

    2011-05-01

    private firms, not the government. Aircraft Net Cost Growth B737-400 0.76 B757-200ER 0.80 A310-300 0.98 A320 0.92 A330-300 0.86 DC10-30 0.83 MD...Analysis. (1989). Results of Navy Competition. Nolte, P., Quackenbush, et al. (2008). Sustainment key performance parameter and the RAM-C manual ...of Defense. (2009). Department of Defense reliability, availability, maintainability, and cost rationale report manual . Washington, DC: Department of

  10. Introducing Corporate Reputation Continuity To Support Organizational Resilience Against Crises

    National Research Council Canada - National Science Library

    Epaminondas Koronis; Stavros T Ponis

    2012-01-01

      As Corporate Reputation (CR) evolves into an important asset for organizations, crises, disasters and other supply chain disruptive events, stand as threats to the preservation of the reputation capital since they usually result...

  11. [On National Demonstration Areas: a cluster analysis].

    Science.gov (United States)

    Mao, F; Jiang, Y Y; Dong, W L; Ji, N; Dong, J Q

    2017-04-10

    Objective: To understand the 'backward' provinces and the relatively poor work among the construction of National Demonstration Area, so as to promote communication and future visions among different regions. Methods: Methods on Cluster analysis were used to compare the development of National Demonstration Area in different provinces, including the coverage of National Demonstration Area and the scores of non-communicable disease (NCDs) prevention and control work based on a standardized indicating system. Results: According to the results from the construction of National Demonstration Area, all the 29 provinces and the Xinjiang Production and Construction Corps (except Tibet and Qinghai) were classified into 6 categories: Shanghai; Beijing, Zhejiang, Chongqing; Tianjin, Shandong, Guangdong and Xinjiang Production and Construction Corps; Hebei, Fujian, Hubei, Jiangsu, Liaoning, Xinjiang, Hunan and Guangxi; Shanxi, Jilin, Henan, Hainan,Sichuan, Anhui and Jiangxi; Inner Mongolia, Shaanxi, Ningxia, Guizhou, Yunnan, Gansu and Heilongjiang. Based on the scores gathered from this study, 24 items that representing the achievements from the NCDs prevention and control endeavor were classified into 4 categories: Manpower, special day on NCD, information materials development, policy/strategy support, financial support, mass media, enabled environment, community fitness campaign, health promotion for children and teenage, institutional structure and patient self-management; healthy diet, risk factors on NCDs surveillance, tobacco control and community diagnosis; intervention of high-risk groups, identification of high-risk groups, reporting system on cardiovascular and cerebrovascular events, popularization of basic public health service, workplace intervention programs, construction of demonstration units and mortality surveillance; oral hygiene and tumor registration. Contents including oral hygiene, tumor registration, intervention on high-risk groups, identification of

  12. Probability of Detection Demonstration Transferability

    Science.gov (United States)

    Parker, Bradford H.

    2008-01-01

    The ongoing Mars Science Laboratory (MSL) Propellant Tank Penetrant Nondestructive Evaluation (NDE) Probability of Detection (POD) Assessment (NESC activity) has surfaced several issues associated with liquid penetrant POD demonstration testing. This presentation lists factors that may influence the transferability of POD demonstration tests. Initial testing will address the liquid penetrant inspection technique. Some of the factors to be considered in this task are crack aspect ratio, the extent of the crack opening, the material and the distance between the inspection surface and the inspector's eye.

  13. 京沪高速铁路大跨混凝土连续梁分段支架现浇施工技术%On-site Cast Construction Techniques for Segmental Support of Large-Span Continuous Concrete Beams on Beijing-Shanghai High Speed Railway

    Institute of Scientific and Technical Information of China (English)

    李志荣

    2011-01-01

    Based on the construction of continuous concrete beams of Hanzhuang canal bridge (60 + 100 + 60) m on Beijing-Shanghai high speed railway, the segmental support on-site cast plan and its construction organization design are illus- trated, and the support design solution, finite element mechanics analysis of the construction processes and technique re- quirement are explained in detail. Theory analysis indicates that the construction process is safe, reliable and controllable based on the FEM mechanics analysis. Successful construction of the bridge shows segmental support on site cast for con- crete continuous beam bridge techniques is feasible in technological and economical term. The method can be a reference for similar construction projects.%以京沪高速铁路韩庄运河特大桥混凝土连续梁桥的施工为例,阐述了支架法分段现浇施工方案及其施工组织设计,并详细介绍了支架设计方案、施工过程有限元力学分析及其技术要求。理论分析表明,施工过程安全可靠、可控。成功的实践进一步表明,采用支架法分段现浇施工技术完成混凝土连续梁桥的施工,技术可行,经济效果显著,施工方法可供同类型工程施工参考。

  14. Measuring business continuity programmes in large organisations.

    Science.gov (United States)

    Green, Christopher

    2014-01-01

    In the field of business continuity management, organisations commit sums of money (often very large sums) to develop and maintain their continuity capability. Despite this, there is almost no measurement of whether this expense offers value for money, or whether it is targeted in the right areas. This paper will explain some methods of measuring components of a business continuity programme. The important outputs from this measurement activity are to demonstrate that an organisation's continuity capability is improving over time, and to identify areas of weakness that should be targeted during future work.

  15. Commercial Demonstration of Wood Recovery, Recycling, and Value Adding Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Auburn Machinery, Inc.

    2004-07-15

    This commercial demonstration project demonstrated the technical feasibility of converting low-value, underutilized and waste stream solid wood fiber material into higher valued products. With a growing need to increase product/production yield and reduce waste in most sawmills, few recovery operations and practically no data existed to support the viability of recovery operations. Prior to our efforts, most all in the forest products industry believed that recovery was difficult, extremely labor intensive, not cost effective, and that recovered products had low value and were difficult to sell. This project provided an opportunity for many within the industry to see through demonstration that converting waste stream material into higher valued products does in fact offer a solution. Our work, supported by the U.S. Department of Energy, throughout the project aimed to demonstrate a reasonable approach to reducing the millions of recoverable solid wood fiber tons that are annually treated as and converted into low value chips, mulch and fuel. Consequently sawmills continue to suffer from reduced availability of forest resources, higher raw material costs, growing waste disposal problems, increased global competition, and more pressure to operate in an Environmentally Friendly manner. It is our belief (based upon the experience of this project) that the successful mainstreaming of the recovery concept would assist in alleviating this burden as well as provide for a realistically achievable economic benefit to those who would seriously pursue the concept and tap into the rapidly growing ''GREEN'' building marketplace. Ultimately, with participation and aggressive pursuit of the recovery concept, the public would benefit in that: (1) Landfill/disposal waste volume could be reduced adding greater life to existing municipal landfill sites thereby minimizing the need to prematurely license and open added facilities. Also, there would be a cost

  16. LIMB Demonstration Project Extension and Coolside Demonstration. [Final report

    Energy Technology Data Exchange (ETDEWEB)

    Goots, T.R.; DePero, M.J.; Nolan, P.S.

    1992-11-10

    This report presents results from the limestone Injection Multistage Burner (LIMB) Demonstration Project Extension. LIMB is a furnace sorbent injection technology designed for the reduction of sulfur dioxide (SO{sub 2}) and nitrogen oxides (NO{sub x}) emissions from coal-fired utility boilers. The testing was conducted on the 105 Mwe, coal-fired, Unit 4 boiler at Ohio Edison`s Edgewater Station in Lorain, Ohio. In addition to the LIMB Extension activities, the overall project included demonstration of the Coolside process for S0{sub 2} removal for which a separate report has been issued. The primary purpose of the DOE LIMB Extension testing, was to demonstrate the generic applicability of LIMB technology. The program sought to characterize the S0{sub 2} emissions that result when various calcium-based sorbents are injected into the furnace, while burning coals having sulfur content ranging from 1.6 to 3.8 weight percent. The four sorbents used included calcitic limestone, dolomitic hydrated lime, calcitic hydrated lime, and calcitic hydrated lime with a small amount of added calcium lignosulfonate. The results include those obtained for the various coal/sorbent combinations and the effects of the LIMB process on boiler and plant operations.

  17. Nocturnal continuous glucose monitoring

    DEFF Research Database (Denmark)

    Bay, Christiane; Kristensen, Peter Lommer; Pedersen-Bjergaard, Ulrik;

    2013-01-01

    Abstract Background: A reliable method to detect biochemical nocturnal hypoglycemia is highly needed, especially in patients with recurrent severe hypoglycemia. We evaluated reliability of nocturnal continuous glucose monitoring (CGM) in patients with type 1 diabetes at high risk of severe...

  18. Continuous-time signals

    CERN Document Server

    Shmaliy, Yuriy

    2006-01-01

    Gives a modern description of continuous-time deterministic signals Signal formation techniquesTime vs. frequency and frequency vs. time analysisCorrelation and energy analysisNarrowband signals and sampling.

  19. Continuous ethanol fermentors

    Energy Technology Data Exchange (ETDEWEB)

    1983-08-03

    A continuous EtOH fermentor was developed. In the 1st stage of the fermentor, EtOH fermentation medium is contacted with an EtOH-producing bacterium (e.g. Zymomonas mobilis) attached to a carrier material (e.g., vermiculite powder) and with brewers' bottom yeast in the 2nd stage. This system does not require any special cell separator for continuous operation.

  20. Continuous Time Model Estimation

    OpenAIRE

    Carl Chiarella; Shenhuai Gao

    2004-01-01

    This paper introduces an easy to follow method for continuous time model estimation. It serves as an introduction on how to convert a state space model from continuous time to discrete time, how to decompose a hybrid stochastic model into a trend model plus a noise model, how to estimate the trend model by simulation, and how to calculate standard errors from estimation of the noise model. It also discusses the numerical difficulties involved in discrete time models that bring about the unit ...

  1. Weed Identification Field Training Demonstrations.

    Science.gov (United States)

    Murdock, Edward C.; And Others

    1986-01-01

    Reviews efforts undertaken in weed identification field training sessions for agriprofessionals in South Carolina. Data over a four year period (1980-1983) revealed that participants showed significant improvement in their ability to identify weeds. Reaffirms the value of the field demonstration technique. (ML)

  2. Phenolphthalein-Pink Tornado Demonstration

    Science.gov (United States)

    Prall, Bruce R.

    2008-01-01

    The titration of HCl with NaOH has traditionally been used to introduce beginning chemistry students to the concepts of acid-base chemistry and stoichiometry. The demonstration described in this article utilizes this reaction as a means of providing students an opportunity to observe the dynamic motion associated with a swirling vortex and its…

  3. Weed Identification Field Training Demonstrations.

    Science.gov (United States)

    Murdock, Edward C.; And Others

    1986-01-01

    Reviews efforts undertaken in weed identification field training sessions for agriprofessionals in South Carolina. Data over a four year period (1980-1983) revealed that participants showed significant improvement in their ability to identify weeds. Reaffirms the value of the field demonstration technique. (ML)

  4. Demonstrating Fermat's Principle in Optics

    Science.gov (United States)

    Paleiov, Orr; Pupko, Ofir; Lipson, S. G.

    2011-01-01

    We demonstrate Fermat's principle in optics by a simple experiment using reflection from an arbitrarily shaped one-dimensional reflector. We investigated a range of possible light paths from a lamp to a fixed slit by reflection in a curved reflector and showed by direct measurement that the paths along which light is concentrated have either…

  5. SunJammer Technology Demonstration

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Sunjammer Project is a NASA funded contract to L?Garde Inc. to fly a solar sail demonstration for a period of approximately one year. L?Garde is also partnered...

  6. Launch Vehicle Dynamics Demonstrator Model

    Science.gov (United States)

    1963-01-01

    Launch Vehicle Dynamics Demonstrator Model. The effect of vibration on launch vehicle dynamics was studied. Conditions included three modes of instability. The film includes close up views of the simulator fuel tank with and without stability control. [Entire movie available on DVD from CASI as Doc ID 20070030984. Contact help@sti.nasa.gov

  7. Phenolphthalein-Pink Tornado Demonstration

    Science.gov (United States)

    Prall, Bruce R.

    2008-01-01

    The titration of HCl with NaOH has traditionally been used to introduce beginning chemistry students to the concepts of acid-base chemistry and stoichiometry. The demonstration described in this article utilizes this reaction as a means of providing students an opportunity to observe the dynamic motion associated with a swirling vortex and its…

  8. Demonstration of melatonin in amphibia

    NARCIS (Netherlands)

    Veerdonk, F.C.G. van de

    1967-01-01

    The presence of melatonin in the amphibian epiphysis has been ascertained earlier by several indirect methods, demonstrating the synthesizing enzyme or precursors of the compound. This communication describes the presence of melatonin in amphibian brain in a direct way, using dextran gel chromatogra

  9. Nutritional Support

    Science.gov (United States)

    Nutritional support is therapy for people who cannot get enough nourishment by eating or drinking. You may ... absorb nutrients through your digestive system You receive nutritional support through a needle or catheter placed in ...

  10. Launch Vehicle Demonstrator Using Shuttle Assets

    Science.gov (United States)

    Threet, Grady E., Jr.; Creech, Dennis M.; Philips, Alan D.; Water, Eric D.

    2011-01-01

    The Marshall Space Flight Center Advanced Concepts Office (ACO) has the leading role for NASA s preliminary conceptual launch vehicle design and performance analysis. Over the past several years the ACO Earth-to-Orbit Team has evaluated thousands of launch vehicle concept variations for a multitude of studies including agency-wide efforts such as the Exploration Systems Architecture Study (ESAS), Constellation, Heavy Lift Launch Vehicle (HLLV), Heavy Lift Propulsion Technology (HLPT), Human Exploration Framework Team (HEFT), and Space Launch System (SLS). NASA plans to continue human space exploration and space station utilization. Launch vehicles used for heavy lift cargo and crew will be needed. One of the current leading concepts for future heavy lift capability is an inline one and a half stage concept using solid rocket boosters (SRB) and based on current Shuttle technology and elements. Potentially, the quickest and most cost-effective path towards an operational vehicle of this configuration is to make use of a demonstrator vehicle fabricated from existing shuttle assets and relying upon the existing STS launch infrastructure. Such a demonstrator would yield valuable proof-of-concept data and would provide a working test platform allowing for validated systems integration. Using shuttle hardware such as existing RS-25D engines and partial MPS, propellant tanks derived from the External Tank (ET) design and tooling, and four-segment SRB s could reduce the associated upfront development costs and schedule when compared to a concept that would rely on new propulsion technology and engine designs. There are potentially several other additional benefits to this demonstrator concept. Since a concept of this type would be based on man-rated flight proven hardware components, this demonstrator has the potential to evolve into the first iteration of heavy lift crew or cargo and serve as a baseline for block upgrades. This vehicle could also serve as a demonstration

  11. Natural Hazard Demonstrations for Teaching

    Science.gov (United States)

    Malamud, B. D.

    2005-12-01

    This paper presents several demonstrations that have been developed or gathered from other sources in the general area of natural hazards (e.g. landslides, earthquakes, volcanoes, wildfires, tsunamis, mass movements, asteroid impacts, etc.). There are many methods of teaching, but as university lecturers, particularly for large class sizes, we find ourselves too often presenting material to students by direct speaking, or some combination of blackboard/whiteboard/slide projector/digital projector. There are certainly a number of techniques to more actively involve students, so that teaching is not just `receiving of information', including breaking up students into small group discussions, encouraging students to actively participate in class through comments and questions, and/or some combination of hands-on activities and demonstrations. It is this latter which is concentrated on here. As a teaching tool, the students themselves became much more excited about what they are learning if use is made of 5--10 minute demonstrations, even if only peripherally related to the subject at hand. The resultant discussion with questions and comments by students keeps both the students and the lecturer (in this case the author) motivated and intrigued about the subjects being discussed. Days, weeks, and months later, the students remember these `demonstrations', but to set these up takes time, effort, and resources of equipment, although not necessarily a large amount of the latter. Several natural hazards demonstrations are presented here, most inexpensive, that have been used in front of large university classes and smaller `break-out groups', and which can also be adapted for secondary-school students.

  12. Experimental demonstration of the induction synchrotron.

    Science.gov (United States)

    Takayama, Ken; Arakida, Yoshio; Dixit, Tanuja; Iwashita, Taiki; Kono, Tadaaki; Nakamura, Eiji; Otsuka, Kazunori; Shimosaki, Yoshito; Torikai, Kota; Wake, Masayoshi

    2007-02-01

    We report an experimental demonstration of the induction synchrotron, the concept of which has been proposed as a future accelerator for the second generation of neutrino factory or hadron collider. The induction synchrotron supports a superbunch and a superbunch permits more charge to be accelerated while observing the constraints of the transverse space-charge limit. By using a newly developed induction acceleration system instead of radio-wave acceleration devices, a single proton bunch injected from the 500 MeV booster ring and captured by the barrier bucket created by the induction step voltages was accelerated to 6 GeV in the KEK proton synchrotron.

  13. Irvine Smart Grid Demonstration, a Regional Smart Grid Demonstration Project

    Energy Technology Data Exchange (ETDEWEB)

    Yinger, Robert [Southern California Edison Company, Rosemead, CA (United States); Irwin, Mark [Southern California Edison Company, Rosemead, CA (United States)

    2015-12-29

    ISGD was a comprehensive demonstration that spanned the electricity delivery system and extended into customer homes. The project used phasor measurement technology to enable substation-level situational awareness, and demonstrated SCE’s next-generation substation automation system. It extended beyond the substation to evaluate the latest generation of distribution automation technologies, including looped 12-kV distribution circuit topology using URCIs. The project team used DVVC capabilities to demonstrate CVR. In customer homes, the project evaluated HAN devices such as smart appliances, programmable communicating thermostats, and home energy management components. The homes were also equipped with energy storage, solar PV systems, and a number of energy efficiency measures (EEMs). The team used one block of homes to evaluate strategies and technologies for achieving ZNE. A home achieves ZNE when it produces at least as much renewable energy as the amount of energy it consumes annually. The project also assessed the impact of device-specific demand response (DR), as well as load management capabilities involving energy storage devices and plug-in electric vehicle charging equipment. In addition, the ISGD project sought to better understand the impact of ZNE homes on the electric grid. ISGD’s SENet enabled end-to-end interoperability between multiple vendors’ systems and devices, while also providing a level of cybersecurity that is essential to smart grid development and adoption across the nation. The ISGD project includes a series of sub-projects grouped into four logical technology domains: Smart Energy Customer Solutions, Next-Generation Distribution System, Interoperability and Cybersecurity, and Workforce of the Future. Section 2.3 provides a more detailed overview of these domains.

  14. The MAJORANA Demonstrator Radioassay Program

    Energy Technology Data Exchange (ETDEWEB)

    Abgrall, N.; Arnquist, Isaac J.; Avignone, F. T.; Back, Henning O.; Barabash, Alexander S.; Bertrand, F.; Boswell, M.; Bradley, A. W.; Brudanin, V.; Busch, Matthew; Buuck, M.; Byram, D.; Caldwell, A. S.; Chan, Yuen-Dat; Christofferson, C. D.; Chu, P. H.; Cuesta, C.; Detwiler, Jason A.; Dunmore, J. A.; Efremenko, Yuri; Ejiri, H.; Elliott, S.; Finnerty, P.; Galindo-Uribarri, A.; Gehman, Victor M.; Gilliss, T.; Giovanetti, G. K.; Goett, J.; Green, M. P.; Gruszko, J.; Guinn, I.; Guiseppe, V. E.; Henning, R.; Hoppe, Eric W.; Howard, S.; Howe, M. A.; Jasinski, B. R.; Johnson, R. A.; Keeter, K.; Kidd, M. F.; Kochetov, Oleg; Konovalov, S.; Kouzes, Richard T.; Laferriere, Brian D.; Leon, Jonathan D.; Loach, J. C.; MacMullin, J.; MacMullin, S.; Martin, R. D.; Massarcyk, R.; Meijer, S. J.; Mertens, S.; Miller, M. L.; Orrell, John L.; O' Shaughnessy, C.; Overman, Nicole R.; Poon, Alan W.; Pushkin, K.; Radford, D. C.; Rager, J.; Rielage, Keith; Robertson, R. G. H.; Romero-Romero, E.; Ronquest, M. C.; Schubert, Alexis G.; Shanks, B.; Shirchenko, M.; Snavely, Kyle J.; Snyder, N.; Steele, David; Suriano, Anne-Marie; Tedeschi, D.; Trimble, J. E.; Varner, R. L.; Vasilyev, Sergey; Vetter, K.; Vorren, Kris R.; White, B. R.; Wilkerson, J. F.; Wiseman, C.; Xu, W.; Yakushev, E.; Yu, Chang-Hong; Yumatov, Vladimir; Zhitnikov, I.

    2016-05-03

    The Majorana collaboration is constructing the Majorana Demonstrator at the Sanford Underground Research Facility at the Homestake gold mine, in Lead, SD. The apparatus will use Ge detectors, enriched in isotope 76Ge, to demonstrate the feasibility of a large-scale Ge detector experiment to search for neutrinoless double beta decay. The long half-life of this postulated process requires that the apparatus be extremely low in radioactive isotopes whose decays may produce backgrounds to the search. The radioassay program conducted by the collaboration to ensure that the materials comprising the apparatus are suffciently pure is described. The resulting measurements of the radioactiveisotope contamination for a number of materials studied for use in the detector are reported.

  15. The MAJORANA DEMONSTRATOR radioassay program

    Energy Technology Data Exchange (ETDEWEB)

    Abgrall, N. [Nuclear Science Division, Lawrence Berkeley National Laboratory, Berkeley, CA (United States); Shanghai Jiao Tong University, Shanghai (China); Arnquist, I.J. [Pacific Northwest National Laboratory, Richland, WA (United States); Avignone, F.T. [Department of Physics and Astronomy, University of South Carolina, Columbia, SC (United States); Oak Ridge National Laboratory, Oak Ridge, TN (United States); Back, H.O. [Department of Physics, North Carolina State University, Raleigh, NC (United States); Triangle Universities Nuclear Laboratory, Durham, NC (United States); Barabash, A.S. [National Research Center, “Kurchatov Institute” Institute for Theoretical and Experimental Physics, Moscow (Russian Federation); Bertrand, F.E. [Oak Ridge National Laboratory, Oak Ridge, TN (United States); Boswell, M. [Los Alamos National Laboratory, Los Alamos, NM (United States); Bradley, A.W. [Nuclear Science Division, Lawrence Berkeley National Laboratory, Berkeley, CA (United States); Brudanin, V. [Joint Institute for Nuclear Research, Dubna (Russian Federation); Busch, M. [Department of Physics, Duke University, Durham, NC (United States); Triangle Universities Nuclear Laboratory, Durham, NC (United States); Buuck, M. [Center for Experimental Nuclear Physics and Astrophysics, and Department of Physics, University of Washington, Seattle, WA (United States); Byram, D. [Department of Physics, University of South Dakota, Vermillion, SD (United States); Caldwell, A.S. [South Dakota School of Mines and Technology, Rapid City, SD (United States); Chan, Y.-D. [Nuclear Science Division, Lawrence Berkeley National Laboratory, Berkeley, CA (United States); Christofferson, C.D. [South Dakota School of Mines and Technology, Rapid City, SD (United States); Chu, P.-H. [Los Alamos National Laboratory, Los Alamos, NM (United States); and others

    2016-08-21

    The MAJORANA collaboration is constructing the MAJORANA DEMONSTRATOR at the Sanford Underground Research Facility at the Homestake gold mine, in Lead, SD. The apparatus will use Ge detectors, enriched in isotope {sup 76}Ge, to demonstrate the feasibility of a large-scale Ge detector experiment to search for neutrinoless double beta decay. The long half-life of this postulated process requires that the apparatus be extremely low in radioactive isotopes whose decays may produce backgrounds to the search. The radioassay program conducted by the collaboration to ensure that the materials comprising the apparatus are sufficiently pure is described. The resulting measurements from gamma-ray counting, neutron activation and mass spectroscopy of the radioactive-isotope contamination for the materials studied for use in the detector are reported. We interpret these numbers in the context of the expected background for the experiment.

  16. The MAJORANA DEMONSTRATOR radioassay program

    Science.gov (United States)

    Abgrall, N.; Arnquist, I. J.; Avignone, F. T.; Back, H. O.; Barabash, A. S.; Bertrand, F. E.; Boswell, M.; Bradley, A. W.; Brudanin, V.; Busch, M.; Buuck, M.; Byram, D.; Caldwell, A. S.; Chan, Y.-D.; Christofferson, C. D.; Chu, P.-H.; Cuesta, C.; Detwiler, J. A.; Dunmore, J. A.; Efremenko, Yu.; Ejiri, H.; Elliott, S. R.; Finnerty, P.; Galindo-Uribarri, A.; Gehman, V. M.; Gilliss, T.; Giovanetti, G. K.; Goett, J.; Green, M. P.; Gruszko, J.; Guinn, I. S.; Guiseppe, V. E.; Henning, R.; Hoppe, E. W.; Howard, S.; Howe, M. A.; Jasinski, B. R.; Johnson, R. A.; Keeter, K. J.; Kidd, M. F.; Kochetov, O.; Konovalov, S. I.; Kouzes, R. T.; LaFerriere, B. D.; Leon, J.; Loach, J. C.; MacMullin, J.; MacMullin, S.; Martin, R. D.; Massarczyk, R.; Meijer, S.; Mertens, S.; Miller, M. L.; Orrell, J. L.; O'Shaughnessy, C.; Overman, N. R.; Poon, A. W. P.; Pushkin, K.; Radford, D. C.; Rager, J.; Rielage, K.; Robertson, R. G. H.; Romero-Romero, E.; Ronquest, M. C.; Schubert, A. G.; Shanks, B.; Shirchenko, M.; Snavely, K. J.; Snyder, N.; Steele, D.; Suriano, A. M.; Tedeschi, D.; Trimble, J. E.; Varner, R. L.; Vasilyev, S.; Vetter, K.; Vorren, K.; White, B. R.; Wilkerson, J. F.; Wiseman, C.; Xu, W.; Yakushev, E.; Yu, C.-H.; Yumatov, V.; Zhitnikov, I.

    2016-08-01

    The MAJORANA collaboration is constructing the MAJORANA DEMONSTRATOR at the Sanford Underground Research Facility at the Homestake gold mine, in Lead, SD. The apparatus will use Ge detectors, enriched in isotope 76Ge, to demonstrate the feasibility of a large-scale Ge detector experiment to search for neutrinoless double beta decay. The long half-life of this postulated process requires that the apparatus be extremely low in radioactive isotopes whose decays may produce backgrounds to the search. The radioassay program conducted by the collaboration to ensure that the materials comprising the apparatus are sufficiently pure is described. The resulting measurements from gamma-ray counting, neutron activation and mass spectroscopy of the radioactive-isotope contamination for the materials studied for use in the detector are reported. We interpret these numbers in the context of the expected background for the experiment.

  17. Performance demonstration by ROC method

    Science.gov (United States)

    Wessel, Hannelore; Nockemann, Christina; Tillack, Gerd-Rüdiger; Mattis, Arne

    1994-12-01

    The question of the efficiency of a material testing system is important, when a competing or advanced system appears at the market. The comparison of the different systems can be done partly by the comparison of the technical specification of the systems, but not all parameters can be expressed by measured values, especially not the influence of human inspectors. A testing system in the field of NDT - for example weld inspection - often consists of several different devices and components (radiographic film, its irradiation and development, conventional inspection with a light box, human inspector). The demonstration of the performance of such a system with similar or advanced methods can be done by a statistical method, the ROC method. This quantitative measure for testing performance allows the comparison of complex NDT systems which will be demonstrated in detail by the comparison of conventional weld inspection with inspection of welds using the digitised image of the radiographs.

  18. Structural Assembly Demonstration Experiment (SADE)

    Science.gov (United States)

    Akin, David L.; Mills, Raymond A.; Bowden, Mary L.

    1987-01-01

    The purpose of the Structural Assembly Demonstration Experiment (SADE) was to create a near-term Shuttle flight experiment focusing on the deployment and erection of structural truss elements. The activities of the MIT Space Systems Laboratory consist of three major areas: preparing and conducting neutral buoyancy simulation test series; producing a formal SADE Experiment plan; and studying the structural dynamics issues of the truss structure. Each of these areas is summarized.

  19. Solar heating demonstration. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Bonicatto, L.; Kozak, C.

    1980-01-01

    The demonstration involved a 4-panel solar collector mounted on the industrial arts building. A 120 gallon storage tank supplements a 66 gallon electric hot water heater which supplies hot water for 5 shop wash basins, girl's and boy's lavatories, and a pressure washer in the auto shop. The installation and educational uses of the system are described. (MHR)

  20. Electric thermal storage demonstration program

    Energy Technology Data Exchange (ETDEWEB)

    1992-02-01

    In early 1989, MMWEC, a joint action agency comprised of 30 municipal light departments in Massachusetts and on affiliate in Rhode Island, responded to a DOE request to proposal for the Least Cost Utility Planning program. The MMWEC submission was for the development of a program, focused on small rural electric utilities, to promote the use of electric thermal storage heating systems in residential applications. This report discusses the demonstration of ETS equipment at four member light departments.

  1. Electric thermal storage demonstration program

    Energy Technology Data Exchange (ETDEWEB)

    1992-01-01

    In early 1989, MMWEC, a joint action agency comprised of 30 municipal light departments in Massachusetts and on affiliate in Rhode Island, responded to a DOE request to proposal for the Least Cost Utility Planning program. The MMWEC submission was for the development of a program, focused on small rural electric utilities, to promote the use of electric thermal storage heating systems in residential applications. This report discusses the demonstration of ETS equipment at four member light departments.

  2. Final report for the cryogenic retrieval demonstration

    Energy Technology Data Exchange (ETDEWEB)

    Valentich, D.J.; Yokuda, E.L.

    1992-09-01

    This report documents a demonstration of a proposed buried transuranic waste retrieval concept that uses cryogenic ground freezing and remote excavation. At the Idaho National Engineering Laboratory (INEL), there are over 8 million ft[sup 3] of intermingled soil and transuranic (TRU) wastes in shallow land burial, and retrieval of the material is one of the options being considered by the Buried Waste Integrated Demonstration for the Environmental Restoration program. Cryogenically freezing contaminated soil and buried waste has been proposed as a way to greatly reduce or eliminate the climate the threat of contamination spread during retrieval activities. In support of this idea, a demonstration of an innovative ground freezing and retrieval technology was performed at the INEL. This initial demonstration was held near the Radioactive Waste Management Complex at a cold test pit'' that was built in 1988 as a test bed for the demonstration of retrieval contamination control technologies. This pit is not contaminated with any radioactive or hazardous wastes. Barrels and boxes filled with metals, plastics, tools, paper, cloth, etc. configured in the same manner as expected in contaminated pits and trenches are buried at the cold test pit. After design, fabrication, and shop testing, Sonsub mobilized to the field in early July 1992 to perform the field demonstration. It was planned to freeze and extract four pits, each 9 [times] 9 [times] 10 ft. Each pit represented a different configuration of buried waste (stacked boxes, stacked barrels, random dumped barrels and boxes, and random dumped barrels). Sonsub's proposed technology consisted of driving a series of freeze pipes into the soil and waste, using liquid nitrogen to freeze the mass, and extracting the soil and debris using a series of remote operated, bridge crane mounted tools. In conjunction with the freezing and removal activities, temperature and moisture measurements, and air monitoring were

  3. Final report for the cryogenic retrieval demonstration

    Energy Technology Data Exchange (ETDEWEB)

    Valentich, D.J.; Yokuda, E.L.

    1992-09-01

    This report documents a demonstration of a proposed buried transuranic waste retrieval concept that uses cryogenic ground freezing and remote excavation. At the Idaho National Engineering Laboratory (INEL), there are over 8 million ft{sup 3} of intermingled soil and transuranic (TRU) wastes in shallow land burial, and retrieval of the material is one of the options being considered by the Buried Waste Integrated Demonstration for the Environmental Restoration program. Cryogenically freezing contaminated soil and buried waste has been proposed as a way to greatly reduce or eliminate the climate the threat of contamination spread during retrieval activities. In support of this idea, a demonstration of an innovative ground freezing and retrieval technology was performed at the INEL. This initial demonstration was held near the Radioactive Waste Management Complex at a ``cold test pit`` that was built in 1988 as a test bed for the demonstration of retrieval contamination control technologies. This pit is not contaminated with any radioactive or hazardous wastes. Barrels and boxes filled with metals, plastics, tools, paper, cloth, etc. configured in the same manner as expected in contaminated pits and trenches are buried at the cold test pit. After design, fabrication, and shop testing, Sonsub mobilized to the field in early July 1992 to perform the field demonstration. It was planned to freeze and extract four pits, each 9 {times} 9 {times} 10 ft. Each pit represented a different configuration of buried waste (stacked boxes, stacked barrels, random dumped barrels and boxes, and random dumped barrels). Sonsub`s proposed technology consisted of driving a series of freeze pipes into the soil and waste, using liquid nitrogen to freeze the mass, and extracting the soil and debris using a series of remote operated, bridge crane mounted tools. In conjunction with the freezing and removal activities, temperature and moisture measurements, and air monitoring were performed.

  4. Environmental analysis for pipeline gas demonstration plants

    Energy Technology Data Exchange (ETDEWEB)

    Stinton, L.H.

    1978-09-01

    The Department of Energy (DOE) has implemented programs for encouraging the development and commercialization of coal-related technologies, which include coal gasification demonstration-scale activities. In support of commercialization activities the Environmental Analysis for Pipeline Gas Demonstration Plants has been prepared as a reference document to be used in evaluating potential environmental and socioeconomic effects from construction and operation of site- and process-specific projects. Effluents and associated impacts are identified for six coal gasification processes at three contrasting settings. In general, impacts from construction of a high-Btu gas demonstration plant are similar to those caused by the construction of any chemical plant of similar size. The operation of a high-Btu gas demonstration plant, however, has several unique aspects that differentiate it from other chemical plants. Offsite development (surface mining) and disposal of large quantities of waste solids constitute important sources of potential impact. In addition, air emissions require monitoring for trace metals, polycyclic aromatic hydrocarbons, phenols, and other emissions. Potential biological impacts from long-term exposure to these emissions are unknown, and additional research and data analysis may be necessary to determine such effects. Possible effects of pollutants on vegetation and human populations are discussed. The occurrence of chemical contaminants in liquid effluents and the bioaccumulation of these contaminants in aquatic organisms may lead to adverse ecological impact. Socioeconomic impacts are similar to those from a chemical plant of equivalent size and are summarized and contrasted for the three surrogate sites.

  5. Acquisition of Turkish demonstrative pronouns in children

    Directory of Open Access Journals (Sweden)

    Meltem Muşlu

    2015-01-01

    Full Text Available Joint focus of attention is one of the most crucial elements in effective communication. Demonstrative pronouns (DPs have an important role in providing this joint focus of attention. Although demonstratives are a prevalent topic, not many studies are conducted to find out the developmental stages of them. Therefore, the current study attempts to find out children’s comprehension of DPs in Turkish. Based on the results of the study, children’s developmental stages in different age groups are provided. Turkish has a three-way distinction in its demonstrative pronoun system: bu (this, şu (this/that and o (that. The subjects of the study were 12 children of ages 3,4 and 5. The results of the study were intriguing and they showed that learning the demonstrative system in Turkish might follow U-shaped learning pattern. Also, the results seem to support egocentrism hypothesis that children under the age of six had difficulty in shifting the deictic center when they and the experimenter have a different perspective. The use of şu at the age of 4 also showed surprising results.

  6. From 'sense of number' to 'sense of magnitude' - The role of continuous magnitudes in numerical cognition.

    Science.gov (United States)

    Leibovich, Tali; Katzin, Naama; Harel, Maayan; Henik, Avishai

    2016-08-17

    In this review, we are pitting two theories against each other: the more accepted theory-the 'number sense' theory-suggesting that a sense of number is innate and non-symbolic numerosity is being processed independently of continuous magnitudes (e.g., size, area, density); and the newly emerging theory suggesting that (1) both numerosities and continuous magnitudes are processed holistically when comparing numerosities, and (2) a sense of number might not be innate. In the first part of this review, we discuss the 'number sense' theory. Against this background, we demonstrate how the natural correlation between numerosities and continuous magnitudes makes it nearly impossible to study non-symbolic numerosity processing in isolation from continuous magnitudes, and therefore the results of behavioral and imaging studies with infants, adults and animals can be explained, at least in part, by relying on continuous magnitudes. In the second part, we explain the 'sense of magnitude' theory and review studies that directly demonstrate that continuous magnitudes are more automatic and basic than numerosities. Finally, we present outstanding questions. Our conclusion is that there is not enough convincing evidence to support the number sense theory anymore. Therefore, we encourage researchers not to assume that number sense is simply innate, but to put this hypothesis to the test, and to consider if such an assumption is even testable in light of the correlation of numerosity and continuous magnitudes.

  7. DOE`s annealing prototype demonstration projects

    Energy Technology Data Exchange (ETDEWEB)

    Warren, J.; Nakos, J.; Rochau, G.

    1997-02-01

    One of the challenges U.S. utilities face in addressing technical issues associated with the aging of nuclear power plants is the long-term effect of plant operation on reactor pressure vessels (RPVs). As a nuclear plant operates, its RPV is exposed to neutrons. For certain plants, this neutron exposure can cause embrittlement of some of the RPV welds which can shorten the useful life of the RPV. This RPV embrittlement issue has the potential to affect the continued operation of a number of operating U.S. pressurized water reactor (PWR) plants. However, RPV material properties affected by long-term irradiation are recoverable through a thermal annealing treatment of the RPV. Although a dozen Russian-designed RPVs and several U.S. military vessels have been successfully annealed, U.S. utilities have stated that a successful annealing demonstration of a U.S. RPV is a prerequisite for annealing a licensed U.S. nuclear power plant. In May 1995, the Department of Energy`s Sandia National Laboratories awarded two cost-shared contracts to evaluate the feasibility of annealing U.S. licensed plants by conducting an anneal of an installed RPV using two different heating technologies. The contracts were awarded to the American Society of Mechanical Engineers (ASME) Center for Research and Technology Development (CRTD) and MPR Associates (MPR). The ASME team completed its annealing prototype demonstration in July 1996, using an indirect gas furnace at the uncompleted Public Service of Indiana`s Marble Hill nuclear power plant. The MPR team`s annealing prototype demonstration was scheduled to be completed in early 1997, using a direct heat electrical furnace at the uncompleted Consumers Power Company`s nuclear power plant at Midland, Michigan. This paper describes the Department`s annealing prototype demonstration goals and objectives; the tasks, deliverables, and results to date for each annealing prototype demonstration; and the remaining annealing technology challenges.

  8. Aerospace Communications Security Technologies Demonstrated

    Science.gov (United States)

    Griner, James H.; Martzaklis, Konstantinos S.

    2003-01-01

    In light of the events of September 11, 2001, NASA senior management requested an investigation of technologies and concepts to enhance aviation security. The investigation was to focus on near-term technologies that could be demonstrated within 90 days and implemented in less than 2 years. In response to this request, an internal NASA Glenn Research Center Communications, Navigation, and Surveillance Aviation Security Tiger Team was assembled. The 2-year plan developed by the team included an investigation of multiple aviation security concepts, multiple aircraft platforms, and extensively leveraged datalink communications technologies. It incorporated industry partners from NASA's Graphical Weather-in-the-Cockpit research, which is within NASA's Aviation Safety Program. Two concepts from the plan were selected for demonstration: remote "black box," and cockpit/cabin surveillance. The remote "black box" concept involves real-time downlinking of aircraft parameters for remote monitoring and archiving of aircraft data, which would assure access to the data following the loss or inaccessibility of an aircraft. The cockpit/cabin surveillance concept involves remote audio and/or visual surveillance of cockpit and cabin activity, which would allow immediate response to any security breach and would serve as a possible deterrent to such breaches. The datalink selected for the demonstrations was VDL Mode 2 (VHF digital link), the first digital datalink for air-ground communications designed for aircraft use. VDL Mode 2 is beginning to be implemented through the deployment of ground stations and aircraft avionics installations, with the goal of being operational in 2 years. The first demonstration was performed December 3, 2001, onboard the LearJet 25 at Glenn. NASA worked with Honeywell, Inc., for the broadcast VDL Mode 2 datalink capability and with actual Boeing 757 aircraft data. This demonstration used a cockpitmounted camera for video surveillance and a coupling to

  9. Nuclear Systems (NS): Technology Demonstration Unit (TDU) Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Nuclear Systems Project demonstrates nuclear power technology readiness to support the goals of NASA’s Space Technology Mission Directorate. To this end,...

  10. Demonstration projects : learning by experience : the Seabird Island demonstration project

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    2009-10-15

    This article described the Seabird Island sustainable community housing demonstration project near Agassiz, British Columbia. The project provides a sustainable, affordable place for 7 families and demonstrates a new way to build and design communities using renewable energy technologies to provide residents with better quality, energy efficient housing while reducing costs and minimizing environmental impacts. The design integrates renewable energy sources such as wind, solar and geothermal energy to save on heating and lighting costs. This article noted some of the dubious design features that could have been screened out at the design stage if careful analysis had been carried out. It described features such as the solar orientation; climatic factors that influenced the form and details of the building; the high-efficiency, condensing, natural gas water heater for space heating combined with a forced-air and radiant-floor heating system; solariums that provided solar preheating of domestic hot water; ventilation air preheating; the solar roof; an earth-tube ventilation system; and 3 wind turbines to generate electricity to offset conventional electricity sources. Canada Mortgage and Housing Corporation has monitored several of the systems in order to evaluate the extent to which these features have influenced the performance of the dwelling units. The energy use in all 7 units was documented along with indoor air quality. An energy performance rating of EnerGuide 80 was achieved, which is comparable to R-2000. The monitoring study revealed that wind energy at this location was not sufficient to justify the installation of the wind turbines. The solar steel roof/solarium energy system did not perform as expected. In addition, the earth-tube ventilation system provided little heat and its overall contribution to ventilation was uncertain. Other deficiencies were also noted, such as leaky ductwork, non-operational dampers and poorly integrated control systems. The

  11. 40 CFR 63.2270 - How do I monitor and collect data to demonstrate continuous compliance?

    Science.gov (United States)

    2010-07-01

    ... SOURCE CATEGORIES National Emission Standards for Hazardous Air Pollutants: Plywood and Composite Wood... periods described in paragraphs (b) and (c) of this section). (e) For dry rotary dryer and veneer...

  12. The IT user support bookshop is moving and diversifying

    CERN Multimedia

    Jutta Megies & Roger Woolnough ( IT ), Jens Vigen ( DSU )

    2005-01-01

    The IT user support bookshop in Building 513 will officially close on 11th July before re-opening at its new location in the Central Library area on 25th July. The future choice of books will naturally continue to include a large selection of IT titles but will also include physics, engineering and other subjects to be decided according to demand. We will also continue to sell IT CDs. The initial selection of physics books for the launch will be based on input from the Library. We should like to thank you for your continued support in this move, which was stimulated by the heavy demand demonstrated at last year's highly successful book fair. Jutta Megies & Roger Woolnough ( IT ), Jens Vigen ( DSU )

  13. Introduction to Continuous Optimization

    DEFF Research Database (Denmark)

    Andreasson, Niclas; Evgrafov, Anton; Patriksson, Michael

    optimal solutions for continuous optimization models. The main part of the mathematical material therefore concerns the analysis and linear algebra that underlie the workings of convexity and duality, and necessary/sufficient local/global optimality conditions for continuous optimization problems. Natural...... algorithms are then developed from these optimality conditions, and their most important convergence characteristics are analyzed. The book answers many more questions of the form “Why?” and “Why not?” than “How?”. We use only elementary mathematics in the development of the book, yet are rigorous throughout...

  14. Continuous Platform Development

    DEFF Research Database (Denmark)

    Nielsen, Ole Fiil

    low risks and investments but also with relatively fuzzy results. When looking for new platform projects, it is important to make sure that the company and market is ready for the introduction of platforms, and to make sure that people from marketing and sales, product development, and downstream......, but continuous product family evolution challenges this strategy. The concept of continuous platform development is based on the fact that platform development should not be a one-time experience but rather an ongoing process of developing new platforms and updating existing ones, so that product family...

  15. 2015 Workshop on Continuations

    DEFF Research Database (Denmark)

    his volume contains the papers presented at WoC 2015, the Workshop on Continuations held at ETAPS 2015. There were four submissions. Each of them was reviewed by, on the average, three PC members. The committee decided to accept three papers. The program also includes one invited talk. It also...... documents the depth, variety, and richness of continuations with four distilled tutorials. Thanks are due to the local organizers of ETAPS 2015 for the infras- tructure and to the general chairman of WoC 2015, Ugo de'Liguoro, for initiating this workshop and making it happen...

  16. Strategic Energy Planning for Renewable Energy Demonstration Center

    Energy Technology Data Exchange (ETDEWEB)

    Ross, Becky [Cabazon Band of Mission Indians; Crandell, George

    2014-04-10

    The focus of this project is to support the addition of renewable energy technologies to the existing CBMI resource recovery park, known as the Cabazon Resource Recovery Park (CRRP) in Mecca, California. The concept approved for this project was to determine if the resources and the needs existed for the addition of a Renewable Energy Demonstration Center (REDC) at the CRRP. The REDC concept is envisioned to support the need of startup renewable companies for a demonstration site that reduces their development costs.

  17. Exploration Medical System Demonstration Project

    Science.gov (United States)

    Chin, D. A.; McGrath, T. L.; Reyna, B.; Watkins, S. D.

    2011-01-01

    A near-Earth Asteroid (NEA) mission will present significant new challenges including hazards to crew health created by exploring a beyond low earth orbit destination, traversing the terrain of asteroid surfaces, and the effects of variable gravity environments. Limited communications with ground-based personnel for diagnosis and consultation of medical events require increased crew autonomy when diagnosing conditions, creating treatment plans, and executing procedures. Scope: The Exploration Medical System Demonstration (EMSD) project will be a test bed on the International Space Station (ISS) to show an end-to-end medical system assisting the Crew Medical Officers (CMO) in optimizing medical care delivery and medical data management during a mission. NEA medical care challenges include resource and resupply constraints limiting the extent to which medical conditions can be treated, inability to evacuate to Earth during many mission phases, and rendering of medical care by a non-clinician. The system demonstrates the integration of medical technologies and medical informatics tools for managing evidence and decision making. Project Objectives: The objectives of the EMSD project are to: a) Reduce and possibly eliminate the time required for a crewmember and ground personnel to manage medical data from one application to another. b) Demonstrate crewmember's ability to access medical data/information via a software solution to assist/aid in the treatment of a medical condition. c) Develop a common data management architecture that can be ubiquitously used to automate repetitive data collection, management, and communications tasks for all crew health and life sciences activities. d) Develop a common data management architecture that allows for scalability, extensibility, and interoperability of data sources and data users. e) Lower total cost of ownership for development and sustainment of peripheral hardware and software that use EMSD for data management f) Provide

  18. The Edgewater Coolside process demonstration

    Energy Technology Data Exchange (ETDEWEB)

    McCoy, D.C.; Scandrol, R.O.; Statnick, R.M.; Stouffer, M.R.; Winschel, R.A.; Withum, J.A.; Wu, M.M.; Yoon, H. [CONSOL, Inc., Pittsburgh, PA (United States)

    1992-02-01

    The Edgewater Coolside process demonstration met the program objectives which were to determine Coolside SO{sub 2} removal performance, establish short-term process operability, and evaluate the economics of the process versus a limestone wet scrubber. On a flue gas produced from the combustion of 3% sulfur coal, the Coolside process achieved 70% SO{sub 2} removal using commercially-available hydrated lime as the sorbent. The operating conditions were Ca/S mol ratio 2.0, Na/Ca mol ratio 0.2, and 20{degree}F approach to adiabatic saturation temperature ({del}T). During tests using fresh plus recycle sorbent, the recycle sorbent exhibited significant capacity for additional SO{sub 2} removal. The longest steady state operation was eleven days at nominally Ca/S = 2, Na/Ca = 0.22, {del}T = 20--22{degree}F, and 70% SO{sub 2} removal. The operability results achieved during the demonstration indicate that with the recommended process modifications, which are discussed in the Coolside process economic analysis, the process could be designed as a reliable system for utility application. Based on the demonstration program, the Coolside process capital cost for a hypothetical commercial installation was minimized. The optimization consisted of a single, large humidifier, no spare air compressor, no isolation dampers, and a 15 day on-site hydrated lime storage. The levelized costs of the Coolside and the wet limestone scrubbing processes were compared. The Coolside process is generally economically competitive with wet scrubbing for coals containing up to 2.5% sulfur and plants under 350 MWe. Site-specific factors such as plant capacity factor, SO{sub 2} emission limit, remaining plant life, retrofit difficulty, and delivered sorbent cost affect the scrubber-Coolside process economic comparison.

  19. The Edgewater Coolside process demonstration

    Energy Technology Data Exchange (ETDEWEB)

    McCoy, D.C.; Scandrol, R.O.; Statnick, R.M.; Stouffer, M.R.; Winschel, R.A.; Withum, J.A.; Wu, M.M.; Yoon, H. (CONSOL, Inc., Pittsburgh, PA (United States))

    1992-02-01

    The Edgewater Coolside process demonstration met the program objectives which were to determine Coolside SO[sub 2] removal performance, establish short-term process operability, and evaluate the economics of the process versus a limestone wet scrubber. On a flue gas produced from the combustion of 3% sulfur coal, the Coolside process achieved 70% SO[sub 2] removal using commercially-available hydrated lime as the sorbent. The operating conditions were Ca/S mol ratio 2.0, Na/Ca mol ratio 0.2, and 20[degree]F approach to adiabatic saturation temperature ([del]T). During tests using fresh plus recycle sorbent, the recycle sorbent exhibited significant capacity for additional SO[sub 2] removal. The longest steady state operation was eleven days at nominally Ca/S = 2, Na/Ca = 0.22, [del]T = 20--22[degree]F, and 70% SO[sub 2] removal. The operability results achieved during the demonstration indicate that with the recommended process modifications, which are discussed in the Coolside process economic analysis, the process could be designed as a reliable system for utility application. Based on the demonstration program, the Coolside process capital cost for a hypothetical commercial installation was minimized. The optimization consisted of a single, large humidifier, no spare air compressor, no isolation dampers, and a 15 day on-site hydrated lime storage. The levelized costs of the Coolside and the wet limestone scrubbing processes were compared. The Coolside process is generally economically competitive with wet scrubbing for coals containing up to 2.5% sulfur and plants under 350 MWe. Site-specific factors such as plant capacity factor, SO[sub 2] emission limit, remaining plant life, retrofit difficulty, and delivered sorbent cost affect the scrubber-Coolside process economic comparison.

  20. Charge sniffer for electrostatics demonstrations

    Science.gov (United States)

    Dinca, Mihai P.

    2011-02-01

    An electronic electroscope with a special design for demonstrations and experiments on static electricity is described. It operates as an electric charge sniffer by detecting slightly charged objects when they are brought to the front of its sensing electrode. The sniffer has the advantage of combining high directional sensitivity with a logarithmic bar display. It allows for the identification of electric charge polarity during charge separation by friction, peeling, electrostatic induction, batteries, or secondary coils of power transformers. Other experiments in electrostatics, such as observing the electric field of an oscillating dipole and the distance dependence of the electric field generated by simple charge configurations, are also described.

  1. Engineered Geothermal System Demonstration Project

    Energy Technology Data Exchange (ETDEWEB)

    Petty, Susan

    2014-06-19

    In June 2009, AltaRock Energy began field work on a project supported by the U.S. Department of Energy entitled “Use of Multiple Stimulations to Improve Economics of Engineered Geothermal Systems in Shallow High Temperature Intrusives.” The goal of the project was to develop an Engineered Geothermal System (EGS) in the portion of The Geysers geothermal field operated by the Northern California Power Agency (NCPA). The project encountered several problems while deepening Well E-7 which culminated in the suspension of field activities in September 2009. Some of the problems encountered are particular to The Geysers area, while others might be encountered in any geothermal field, and they might be avoided in future operations.

  2. Demonstration Telescopes Using "Dollar Optics"

    Science.gov (United States)

    Ross, Paul

    2008-05-01

    I propose a poster that illustrates the use of "dollar optics” for experimentation and for the creation of demonstration telescopes. Handling a variety of lenses and mirrors provides an opportunity for discovering practical optics. Some part of this path of exploration must have been traveled by Galileo as he experimented with spectacle lenses. "Dollar optics” include reading glasses (positive meniscus lenses), convex and concave mirrors, Fresnel sheets, magnifying lenses, and eye loupes. Unwanted distance spectacles (negative meniscus lenses) are available at second-hand stores. Galileo telescopes, "long” 17th century telescopes, and useful demonstration models of Newtonian reflectors can be made with "dollar” optics. The poster will illustrate practical information about "dollar optics” and telescopes: magnification, focal length, and "diopters” disassembling spectacles; creating cheap mounts for spectacle lenses; the importance of optical axes and alignment; eyepieces; and focusing. (A table would be useful with the poster to set out a hands-on display of "dollar optic” telescopes.) Educators, experimenters, and those concerned with astronomy outreach might be interested in this poster. Working with "dollar optics” requires facility with simple tools, interest in planning projects, patience, imagination, and the willingness to invest some time and effort. "Dollar optics” may help to foster creativity and hands-on enthusiasm - as did Galileo's work with simple lenses 400 years ago. "Oh! When will there be an end put to the new observations and discoveries of this admirable instrument?” - Galileo Galilei as quoted by Henry C. King, The History of the Telescope.

  3. Parker Hybrid Hydraulic Drivetrain Demonstration

    Energy Technology Data Exchange (ETDEWEB)

    Collett, Raymond [Parker-Hannifin Corporation, Cleveland, OH (United States); Howland, James [Parker-Hannifin Corporation, Cleveland, OH (United States); Venkiteswaran, Prasad [National Energy Technology Lab. (NETL), Morgantown, WV (United States)

    2014-03-31

    This report examines the benefits of Parker Hannifin hydraulic hybrid brake energy recovery systems used in commercial applications for vocational purposes. A detailed background on the problem statement being addressed as well as the solution set specific for parcel delivery will be provided. Objectives of the demonstration performed in high start & stop applications included opportunities in fuel usage reduction, emissions reduction, vehicle productivity, and vehicle maintenance. Completed findings during the demonstration period and parallel investigations with NREL, CALSTART, along with a literature review will be provided herein on this research area. Lastly, results identified in the study by third parties validated the savings potential in fuel reduction of on average of 19% to 52% over the baseline in terms of mpg (Lammert, 2014, p11), Parker data for parcel delivery vehicles in the field parallels this at a range of 35% - 50%, emissions reduction of 17.4% lower CO2 per mile and 30.4% lower NOx per mile (Gallo, 2014, p15), with maintenance improvement in the areas of brake and starter replacement, while leaving room for further study in the area of productivity in terms of specific metrics that can be applied and studied.

  4. Bentonite mat demonstration. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Serrato, M.G.

    1994-12-30

    The Bentonite Mat Demonstration was developed to provide the Environmental Restoration Department with field performance characteristics and engineering data for an alternative closure cover system configuration. The demonstration was initiated in response to regulatory concerns regarding the use of an alternative cover system for future design configurations. These design considerations are in lieu of the US Environmental Protection Agency (EPA) Recommended Design for Closure Cover Systems and specifically a single compacted kaolin clay layer with a hydraulic conductivity of 1 {times} 10{sup {minus}7} cm/sec. This alternative configuration is a composite geosynthetic material hydraulic barrier consisting from bottom to top: 2 ft compacted sandy clay layer (typical local Savannah River Site soil type) that is covered by a bentonite mat--geosynthetic clay liner (GCL) and is overlaid by a 40 mil High Density Polyethylene (HDPE) geomembrane--flexible membrane liner. This effort was undertaken to obtain and document the necessary field performance/engineering data for future designs and meet regulatory technical requirements for an alternative cover system configuration. The composite geosynthetic materials hydraulic barrier is the recommended alternative cover system configuration for containment of hazardous and low level radiological waste layers that have a high potential of subsidence to be used at the Savannah River Site (SRS). This alternative configuration mitigates subsidence effects in providing a flexible, lightweight cover system to maintain the integrity of the closure. The composite geosynthetic materials hydraulic barrier is recommended for the Sanitary Landfill and Low Level Radiological Waste Disposal Facility (LLRWDF) Closures.

  5. Newberry Volcano EGS Demonstration - Phase I Results

    Energy Technology Data Exchange (ETDEWEB)

    Osborn, William L. [AltaRock Energy, Inc., Seattle, WA (United States); Petty, Susan [AltaRock Energy, Inc., Seattle, WA (United States); Cladouhos, Trenton T. [AltaRock Energy, Inc., Seattle, WA (United States); Iovenitti, Joe [AltaRock Energy, Inc., Seattle, WA (United States); Nofziger, Laura [AltaRock Energy, Inc., Seattle, WA (United States); Callahan, Owen [AltaRock Energy, Inc., Seattle, WA (United States); Perry, Douglas S. [Davenport Newberry Holdings LLC, Stamford, CT (United States); Stern, Paul L. [PLS Environmental, LLC, Boulder, CO (United States)

    2011-10-23

    Phase I of the Newberry Volcano Enhanced Geothermal System (EGS) Demonstration included permitting, community outreach, seismic hazards analysis, initial microseismic array deployment and calibration, final MSA design, site characterization, and stimulation planning. The multi-disciplinary Phase I site characterization supports stimulation planning and regulatory permitting, as well as addressing public concerns including water usage and induced seismicity. A review of the project's water usage plan by an independent hydrology consultant found no expected impacts to local stakeholders, and recommended additional monitoring procedures. The IEA Protocol for Induced Seismicity Associated with Enhanced Geothermal Systems was applied to assess site conditions, properly inform stakeholders, and develop a comprehensive mitigation plan. Analysis of precision LiDAR elevation maps has concluded that there is no evidence of recent faulting near the target well. A borehole televiewer image log of the well bore revealed over three hundred fractures and predicted stress orientations. No natural, background seismicity has been identified in a review of historic data, or in more than seven months of seismic data recorded on an array of seven seismometers operating around the target well. A seismic hazards and induced seismicity risk assessment by an independent consultant concluded that the Demonstration would contribute no additional risk to residents of the nearest town of La Pine, Oregon. In Phase II of the demonstration, an existing deep hot well, NWG 55-29, will be stimulated using hydroshearing techniques to create an EGS reservoir. The Newberry Volcano EGS Demonstration is allowing geothermal industry and academic experts to develop, validate and enhance geoscience and engineering techniques, and other procedures essential to the expansion of EGS throughout the country. Successful development will demonstrate to the American public that EGS can play a significant role

  6. Continuous Reinforced Concrete Beams

    DEFF Research Database (Denmark)

    Hoang, Cao Linh; Nielsen, Mogens Peter

    1996-01-01

    This report deals with stress and stiffness estimates of continuous reinforced concrete beams with different stiffnesses for negative and positive moments e.g. corresponding to different reinforcement areas in top and bottom. Such conditions are often met in practice.The moment distribution...

  7. Continuous Personal Improvement.

    Science.gov (United States)

    Emiliani, M. L.

    1998-01-01

    Suggests that continuous improvement tools used in the workplace can be applied to self-improvement. Explains the use of such techniques as one-piece flow, kanban, visual controls, and total productive maintenance. Points out misapplications of these tools and describes the use of fishbone diagrams to diagnose problems. (SK)

  8. Reparametrizations of Continuous Paths

    DEFF Research Database (Denmark)

    Fahrenberg, Uli; Raussen, Martin

    2007-01-01

    compare it to the distributive lattice of countable subsets of the unit interval. The results obtained are used to analyse the space of traces in a topological space, i.e., the space of continuous paths up to reparametrization equivalence. This space is shown to be homeomorphic to the space of regular...

  9. Promoting Continuing Education Programs.

    Science.gov (United States)

    Hendrickson, Gayle A.

    This handbook is intended for use by institutions in marketing their continuing education programs. A section on "Devising Your Strategy" looks at identifying a target audience, determining the marketing approach, and developing a marketing plan and promotional techniques. A discussion of media options looks at the advantages and…

  10. Continuous venovenous haemodialysis

    DEFF Research Database (Denmark)

    Bistrup, C; Pedersen, R S; Jensen, Dorte Møller

    1996-01-01

    . Standard solutions for peritoneal dialysis are administered in a single-pass manner countercurrent to the blood flow. To control the dialysate flow through the filter, two separate pumps designed for intravenous infusion are used. Anticoagulation is achieved by means of continuous heparin infusion...

  11. Continuing professional development

    NARCIS (Netherlands)

    Collin, K.; Heijden, van der B.I.J.M.; Lewis, P.

    2012-01-01

    Continuing professional development (CPD), when provided formally, is something that is easy to recognize but perhaps rather more difficult to define. Theoretical and empirical controversy surrounds the scope and understanding of the concept. Definition is made more elusive by the different conceptu

  12. Continuous Personal Improvement.

    Science.gov (United States)

    Emiliani, M. L.

    1998-01-01

    Suggests that continuous improvement tools used in the workplace can be applied to self-improvement. Explains the use of such techniques as one-piece flow, kanban, visual controls, and total productive maintenance. Points out misapplications of these tools and describes the use of fishbone diagrams to diagnose problems. (SK)

  13. Demonstration of the Ability of RCAS to Model Wind Turbines

    Energy Technology Data Exchange (ETDEWEB)

    Jonkman, J.; Cotrell, J.

    2003-08-01

    In recent years, the wind industry has sponsored the development, verification, and validation of comprehensive aeroelastic simulators, which are used for wind turbine design, certification, and research. Unfortunately, as wind turbines continue to grow in size and sometimes exhibit unconventional design characteristics, the existing codes do not always support the additional analysis features required for proper design. The development history, functionality, and advanced nature of RCAS (Rotorcraft Comprehensive Analysis System) make this code a sensible option. RCAS is an aeroelastic simulator developed over a 4-year cooperative effort amongst the U.S. Army's Aeroflightdynamics Directorate, Advanced Rotorcraft Technology (ART), Inc., and the helicopter industry. As its name suggests, RCAS was created for the rotorcraft industry but developed as a general purpose code for modeling the aerodynamic and structural response of any system with rotating and nonrotating subsystems (such as wind turbines). To demonstrate that RCAS can analyze wind turbines, models of a conventional, 1.5-MW, 3-bladed, upwind, horizontal axis wind turbine (HAWT) are created in RCAS and wind turbine analysis codes FAST (Fatigue, Aerodynamics, Structures, and Turbulence) and ADAMS (Automatic Dynamic Analysis of Mechanical Systems). Using these models, a side-by-side comparison of structural response predictions is performed under several test scenarios.

  14. Energy 2007. Research, development, demonstration; Energi 07. Forskning, udvikling, demonstration

    Energy Technology Data Exchange (ETDEWEB)

    Byriel, I.P.; Justesen, Helle; Beck, A.; Borup Jensen, J.; Rosenfeldt Jakobsen, Kl; Jacobsen, Steen Hartvig (eds.)

    2007-08-10

    Danish energy research is in an exciting and challenging situation. Rising oil prices, unstable energy supply, climate policy responsibilities and globalization have brought development of new environmentally friendly and more efficient energy technologies into focus. Promising international markets for newly developed energy technologies are emerging, and at the same time well established Danish positions of strength are challenged by new strong actors on the global market. The Danish government has set to work on its vision of an appreciable strengthening of public energy research funding through the recent law on the energy technological development and demonstration programme EUDP and the realization of globalization funds. The interaction between basic and applied research must be kept intact. In this report the various Danish energy research programmes administered by Energinet.dk, Danish Energy Authority, Danish Energy Association, Danish Council for Strategic Research's Programme Commission on Energy and Environment and Danish National Advanced Technology Foundation, coordinate their annual reports for the first time. The aim of Energy 2007 is to give the reader an idea of how the energy research programmes collaborate on solving the major energy technology challenges - also in an international context. (BA)

  15. Demonstration of 5MW PAFC power plant

    Energy Technology Data Exchange (ETDEWEB)

    Usami, Yutaka [Phosphoric Acid Fuel Cell Technology Research Association, Osaka (Japan); Takae, Toshio [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1996-12-31

    Phosphoric Acid Fuel Cell Technology Research Association, established in May 1991 by Japanese 10 electric power and 4 gas companies, started a new project in 1991 FY, with the object of PAFC realization and aiming the development of 5MW- class PAFC. power plant for urban energy center and 1 MW- class power plant for onsite use. This project is carried out as 6 years plan jointly with New Energy and Industrial Technology Development Organization. The targets of the project are to evaluate and resolve the development task, such as a high reliability, compactness and cost reduction throughout the engineering, manufacturing and field testing of PAFC power plants. PAC tests and power generating test operations of 5MW plant were completed in 1994. Conducting the 2 years continuous operations and studies since 1995, the plant operational performance, system control characteristics, waste heat recovery and environmental advantage will be demonstrated.

  16. A demonstrator for bolometric interferometry

    CERN Document Server

    Ghribi, Adnan; Galli, Silvia; Piat, Michel; Breelle, Eric; Hamilton, Jean-Christophe; Spinelli, Sebastiano; Gervasi, Massimo; Zannoni, Mario

    2009-01-01

    Bolometric Interferometry (BI) is one of the most promising techniques for precise measurements of the Cosmic Microwave Background polarization. In this paper, we present the results of DIBO (Demonstrateur d'Interferometrie Bolometrique), a single-baseline demonstrator operating at 90 GHz, built to proof the validity of the BI concept applied to a millimeter-wave interferometer. This instrument has been characterized in the laboratory with a detector at room temperature and with a 4 K bolometer. This allowed us to measure interference patterns in a clean way, both (1) rotating the source and (2) varying with time the phase shift among the two interferometer's arms. Detailed modelisation has also been performed and validated with measurements.

  17. Pilot Scale Advanced Fogging Demonstration

    Energy Technology Data Exchange (ETDEWEB)

    Demmer, Rick L. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Fox, Don T. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Archiblad, Kip E. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-01-01

    Experiments in 2006 developed a useful fog solution using three different chemical constituents. Optimization of the fog recipe and use of commercially available equipment were identified as needs that had not been addressed. During 2012 development work it was noted that low concentrations of the components hampered coverage and drying in the United Kingdom’s National Nuclear Laboratory’s testing much more so than was evident in the 2006 tests. In fiscal year 2014 the Idaho National Laboratory undertook a systematic optimization of the fogging formulation and conducted a non-radioactive, pilot scale demonstration using commercially available fogging equipment. While not as sophisticated as the equipment used in earlier testing, the new approach is much less expensive and readily available for smaller scale operations. Pilot scale testing was important to validate new equipment of an appropriate scale, optimize the chemistry of the fogging solution, and to realize the conceptual approach.

  18. Clean Coal Diesel Demonstration Project

    Energy Technology Data Exchange (ETDEWEB)

    Robert Wilson

    2006-10-31

    A Clean Coal Diesel project was undertaken to demonstrate a new Clean Coal Technology that offers technical, economic and environmental advantages over conventional power generating methods. This innovative technology (developed to the prototype stage in an earlier DOE project completed in 1992) enables utilization of pre-processed clean coal fuel in large-bore, medium-speed, diesel engines. The diesel engines are conventional modern engines in many respects, except they are specially fitted with hardened parts to be compatible with the traces of abrasive ash in the coal-slurry fuel. Industrial and Municipal power generating applications in the 10 to 100 megawatt size range are the target applications. There are hundreds of such reciprocating engine power-plants operating throughout the world today on natural gas and/or heavy fuel oil.

  19. The Liquid Argon Purity Demonstrator

    CERN Document Server

    Adamowski, M; Dvorak, E; Hahn, A; Jaskierny, W; Johnson, C; Jostlein, H; Kendziora, C; Lockwitz, S; Pahlka, B; Plunkett, R; Pordes, S; Rebel, B; Schmitt, R; Stancari, M; Tope, T; Voirin, E; Yang, T

    2014-01-01

    The Liquid Argon Purity Demonstrator was an R&D test stand designed to determine if electron drift lifetimes adequate for large neutrino detectors could be achieved without first evacuating the cryostat. We describe here the cryogenic system, its operations, and the apparatus used to determine the contaminant levels in the argon and to measure the electron drift lifetime. The liquid purity obtained by this system was facilitated by a gaseous argon purge. Additionally, gaseous impurities from the ullage were prevented from entering the liquid at the gas-liquid interface by condensing the gas and filtering the resulting liquid before returning to the cryostat. The measured electron drift lifetime in this test was greater than 6 ms, sustained over several periods of many weeks. Measurements of the temperature profile in the argon, to assess convective flow and boiling, were also made and are compared to simulation.

  20. The Liquid Argon Purity Demonstrator

    Energy Technology Data Exchange (ETDEWEB)

    Adamowski, M.; Carls, B.; Dvorak, E.; Hahn, A.; Jaskierny, W.; Johnson, C.; Jostlein, H.; Kendziora, C.; Lockwitz, S.; Pahlka, B.; Plunkett, R.; Pordes, S.; Rebel, B.; Schmitt, R.; Stancari, M.; Tope, T.; Voirin, E.; Yang, T.

    2014-07-01

    The Liquid Argon Purity Demonstrator was an R&D test stand designed to determine if electron drift lifetimes adequate for large neutrino detectors could be achieved without first evacuating the cryostat. We describe here the cryogenic system, its operations, and the apparatus used to determine the contaminant levels in the argon and to measure the electron drift lifetime. The liquid purity obtained by this system was facilitated by a gaseous argon purge. Additionally, gaseous impurities from the ullage were prevented from entering the liquid at the gas-liquid interface by condensing the gas and filtering the resulting liquid before returning to the cryostat. The measured electron drift lifetime in this test was greater than 6 ms, sustained over several periods of many weeks. Measurements of the temperature profile in the argon, to assess convective flow and boiling, were also made and are compared to simulation.

  1. Visualization by Demonstration: An Interaction Paradigm for Visual Data Exploration.

    Science.gov (United States)

    Saket, Bahador; Kim, Hannah; Brown, Eli T; Endert, Alex

    2017-01-01

    Although data visualization tools continue to improve, during the data exploration process many of them require users to manually specify visualization techniques, mappings, and parameters. In response, we present the Visualization by Demonstration paradigm, a novel interaction method for visual data exploration. A system which adopts this paradigm allows users to provide visual demonstrations of incremental changes to the visual representation. The system then recommends potential transformations (Visual Representation, Data Mapping, Axes, and View Specification transformations) from the given demonstrations. The user and the system continue to collaborate, incrementally producing more demonstrations and refining the transformations, until the most effective possible visualization is created. As a proof of concept, we present VisExemplar, a mixed-initiative prototype that allows users to explore their data by recommending appropriate transformations in response to the given demonstrations.

  2. Contaminant analysis automation demonstration proposal

    Energy Technology Data Exchange (ETDEWEB)

    Dodson, M.G.; Schur, A.; Heubach, J.G.

    1993-10-01

    The nation-wide and global need for environmental restoration and waste remediation (ER&WR) presents significant challenges to the analytical chemistry laboratory. The expansion of ER&WR programs forces an increase in the volume of samples processed and the demand for analysis data. To handle this expanding volume, productivity must be increased. However. The need for significantly increased productivity, faces contaminant analysis process which is costly in time, labor, equipment, and safety protection. Laboratory automation offers a cost effective approach to meeting current and future contaminant analytical laboratory needs. The proposed demonstration will present a proof-of-concept automated laboratory conducting varied sample preparations. This automated process also highlights a graphical user interface that provides supervisory, control and monitoring of the automated process. The demonstration provides affirming answers to the following questions about laboratory automation: Can preparation of contaminants be successfully automated?; Can a full-scale working proof-of-concept automated laboratory be developed that is capable of preparing contaminant and hazardous chemical samples?; Can the automated processes be seamlessly integrated and controlled?; Can the automated laboratory be customized through readily convertible design? and Can automated sample preparation concepts be extended to the other phases of the sample analysis process? To fully reap the benefits of automation, four human factors areas should be studied and the outputs used to increase the efficiency of laboratory automation. These areas include: (1) laboratory configuration, (2) procedures, (3) receptacles and fixtures, and (4) human-computer interface for the full automated system and complex laboratory information management systems.

  3. Ground test for vibration control demonstrator

    Science.gov (United States)

    Meyer, C.; Prodigue, J.; Broux, G.; Cantinaud, O.; Poussot-Vassal, C.

    2016-09-01

    In the objective of maximizing comfort in Falcon jets, Dassault Aviation is developing an innovative vibration control technology. Vibrations of the structure are measured at several locations and sent to a dedicated high performance vibration control computer. Control laws are implemented in this computer to analyse the vibrations in real time, and then elaborate orders sent to the existing control surfaces to counteract vibrations. After detailing the technology principles, this paper focuses on the vibration control ground demonstration that was performed by Dassault Aviation in May 2015 on Falcon 7X business jet. The goal of this test was to attenuate vibrations resulting from fixed forced excitation delivered by shakers. The ground test demonstrated the capability to implement an efficient closed-loop vibration control with a significant vibration level reduction and validated the vibration control law design methodology. This successful ground test was a prerequisite before the flight test demonstration that is now being prepared. This study has been partly supported by the JTI CleanSky SFWA-ITD.

  4. Controlled Hydrogen Fleet and Infrastructure Demonstration Project

    Energy Technology Data Exchange (ETDEWEB)

    Dr. Scott Staley

    2010-03-31

    This program was undertaken in response to the US Department of Energy Solicitation DE-PS30-03GO93010, resulting in this Cooperative Agreement with the Ford Motor Company and BP to demonstrate and evaluate hydrogen fuel cell vehicles and required fueling infrastructure. Ford initially placed 18 hydrogen fuel cell vehicles (FCV) in three geographic regions of the US (Sacramento, CA; Orlando, FL; and southeast Michigan). Subsequently, 8 advanced technology vehicles were developed and evaluated by the Ford engineering team in Michigan. BP is Ford's principal partner and co-applicant on this project and provided the hydrogen infrastructure to support the fuel cell vehicles. BP ultimately provided three new fueling stations. The Ford-BP program consists of two overlapping phases. The deliverables of this project, combined with those of other industry consortia, are to be used to provide critical input to hydrogen economy commercialization decisions by 2015. The program's goal is to support industry efforts of the US President's Hydrogen Fuel Initiative in developing a path to a hydrogen economy. This program was designed to seek complete systems solutions to address hydrogen infrastructure and vehicle development, and possible synergies between hydrogen fuel electricity generation and transportation applications. This project, in support of that national goal, was designed to gain real world experience with Hydrogen powered Fuel Cell Vehicles (H2FCV) 'on the road' used in everyday activities, and further, to begin the development of the required supporting H2 infrastructure. Implementation of a new hydrogen vehicle technology is, as expected, complex because of the need for parallel introduction of a viable, available fuel delivery system and sufficient numbers of vehicles to buy fuel to justify expansion of the fueling infrastructure. Viability of the fuel structure means widespread, affordable hydrogen which can return a reasonable profit to

  5. The Robert Wood Johnson Foundation Diabetes Initiative: demonstration projects emphasizing self-management.

    Science.gov (United States)

    Fisher, Edwin B; Brownson, Carol A; O'Toole, Mary L; Shetty, Gowri; Anwuri, Victoria V; Fazzone, Patricia; Housemann, Robyn A; Hampton, Andrea D; Kamerow, Douglas B; McCormack, Lauren A; Burton, Joseph A; Orleans, C Tracy; Bazzarre, Terry L

    2007-01-01

    The purpose of the Diabetes Initiative of the Robert Wood Johnson Foundation is to demonstrate feasible and sustainable approaches to promoting diabetes self-management in primary care and community settings. The Diabetes Initiative of the Robert Wood Johnson Foundation includes 14 demonstration projects in primary care settings and in community-clinical partnerships. Projects serve predominantly indigent populations from varied cultural and linguistic backgrounds in urban, rural, and frontier settings around the United States. This report describes the Initiative, its ecological perspective on self-management, and implications for program development, sustainability, and dissemination. Ecological perspectives stress varied levels of influence ranging from individuals to communities and policies. Based on this, the Initiative has identified key resources and supports for self-management (individualized assessment, collaborative goal setting, enhancing skills, follow-up and support, community resources, and continuity of quality clinical care). Lessons learned include the central roles of community health workers, integration of healthy coping and attention to negative emotion and depression in self-management, community partnerships, approaches to ongoing follow-up and support, organizational factors in sustaining programs, and the utility of a collaborative learning network for program development. Sustainability stresses organizational and policy supports for the program. Dissemination of lessons learned will stress collaboration among interested parties, stimulating consumer understanding and demand for self-management services as central to diabetes care. The Diabetes Initiative demonstrates that effective self-management programs and supports can be implemented in real-world clinical and community settings, providing models of worthwhile, sustainable programs.

  6. Nanofiber adsorbents for high productivity continuous downstream processing.

    Science.gov (United States)

    Hardick, Oliver; Dods, Stewart; Stevens, Bob; Bracewell, Daniel G

    2015-11-10

    An ever increasing focus is being placed on the manufacturing costs of biotherapeutics. The drive towards continuous processing offers one opportunity to address these costs through the advantages it offers. Continuous operation presents opportunities for real-time process monitoring and automated control with potential benefits including predictable product specification, reduced labour costs, and integration with other continuous processes. Specifically to chromatographic operations continuous processing presents an opportunity to use expensive media more efficiently while reducing their size and therefore cost. Here for the first time we show how a new adsorbent material (cellulosic nanofibers) having advantageous convective mass transfer properties can be combined with a high frequency simulated moving bed (SMB) design to provide superior productivity in a simple bioseparation. Electrospun polymeric nanofiber adsorbents offer an alternative ligand support surface for bioseparations. Their non-woven fiber structure with diameters in the sub-micron range creates a remarkably high surface area material that allows for rapid convective flow operations. A proof of concept study demonstrated the performance of an anion exchange nanofiber adsorbent based on criteria including flow and mass transfer properties, binding capacity, reproducibility and life-cycle performance. Binding capacities of the DEAE adsorbents were demonstrated to be 10mg/mL, this is indeed only a fraction of what is achievable from porous bead resins but in combination with a very high flowrate, the productivity of the nanofiber system is shown to be significant. Suitable packing into a flow distribution device has allowed for reproducible bind-elute operations at flowrates of 2,400 cm/h, many times greater than those used in typical beaded systems. These characteristics make them ideal candidates for operation in continuous chromatography systems. A SMB system was developed and optimised to

  7. Continuous coal processing method

    Science.gov (United States)

    Ryason, P. R.

    1980-06-01

    A coal pump is provided in which solid coal is heated in the barrel of an extruder under pressure to a temperature at which the coal assumes plastic properties. The coal is continuously extruded, without static zones, using, for example, screw extrusion preferably without venting through a reduced diameter die to form a dispersed spray. As a result, the dispersed coal may be continuously injected into vessels or combustors at any pressure up to the maximum pressure developed in the extrusion device. The coal may be premixed with other materials such as desulfurization aids or reducible metal ores so that reactions occur, during or after conversion to its plastic state. Alternatively, the coal may be processed and caused to react after extrusion, through the die, with, for example, liquid oxidizers, whereby a coal reactor is provided.

  8. Demonstration of an instrumented patch

    Science.gov (United States)

    Martinez, M.; Renaud, G.; Backman, D.; Genest, M.; Delannoy, M.

    2007-04-01

    The primary objective of this study was to demonstrate the effectiveness of various strain measurement techniques at detecting the disbonding of a composite repair patch and then using this information to validate a new capacitance based disbond detection technique. The instrumented repair patch was parametrically designed with the help of Finite Element Analysis (FEA) software to have a stress concentration at its tip. This stress concentration was designed to produce a disbond during fatigue testing, without the need for the introduction of any foreign material to create an artificial disbond condition. The aluminum substrate was grit blasted and the instrumented patch was bonded using FM ®73 adhesive, and was cured following the recommendations of the manufacturer. The geometric characteristics of the patch followed standard repair guidelines for such variables as material selection, taper angles and loading conditions, with the exception of the area designed for premature disbond. All test specimens were inspected using non-destructive testing technique (ultrasound pulse echo) to guarantee that no disbonding had occurred during curing of the specimen. The specimens were placed under fatigue loading to induce a disbond condition between the aluminum substrate and the patch. The specimens were cyclically loaded and strain gauges bonded to strategic locations on the aluminum and composite patch surface to be able to measure changes in surface strains as the disbond progressed. A Digital Image Correlation (DIC) system was also used to measure full field strains over the gauge length of the coupon. The DIC results were compared with the strain gauge data and were used to provide a qualitative measure of the load transfer in the bonded specimen, which clearly demonstrated the change in surface strain that occurred as the composite patch disbonded from the aluminum substrate. Thermoelastic Stress Analysis (TSA) was also used to measure surface strains on the

  9. Sensor Network Demonstration for In Situ Decommissioning - 13332

    Energy Technology Data Exchange (ETDEWEB)

    Lagos, L.; Varona, J.; Awwad, A. [Applied Research Center, Florida International University, 10555 West Flagler Street, Suite 2100, Miami, FL 33174 (United States); Rivera, J.; McGill, J. [Department of Energy - DOE, Environmental Management Office (United States)

    2013-07-01

    Florida International University's (FIU's) Applied Research Center is currently supporting the Department of Energy's (DOE) Environmental Management Office of D and D and Facility Engineering program. FIU is supporting DOE's initiative to improve safety, reduce technical risks, and limit uncertainty within D and D operations by identifying technologies suitable to meet specific facility D and D requirements, assessing the readiness of those technologies for field deployment, and conducting feasibility studies and large scale demonstrations of promising technologies. During FY11, FIU collaborated with Savannah River National Laboratory in the development of an experimental test site for the demonstration of multiple sensor systems for potential use in the in situ decommissioning process. In situ decommissioning is a process in which the above ground portion of a facility is dismantled and removed, and the underground portion is filled with a cementious material such as grout. In such a scenario, the question remains on how to effectively monitor the structural health of the grout (cracking, flexing, and sinking), as well as track possible migration of contaminants within and out of the grouted monolith. The right types of sensors can aid personnel in better understanding the conditions within the entombed structure. Without sensors embedded in and around the monolith, it will be very difficult to estimate structural integrity and contaminant transport. Yet, to fully utilize the appropriate sensors and the provided data, their performance and reliability must be evaluated outside a laboratory setting. To this end, a large scale experimental setup and demonstration was conducted at FIU. In order to evaluate a large suite of sensor systems, FIU personnel designed and purchased a pre-cast concrete open-top cube, which served as a mock-up of an in situ DOE decommissioned facility. The inside of the cube measures 10 ft x 10 ft x 8 ft. In order to

  10. The application of Dempster-Shafer theory demonstrated with justification provided by legal evidence

    Directory of Open Access Journals (Sweden)

    Shawn P. Curley

    2007-10-01

    Full Text Available In forecasting and decision making, people can and often do represent a degree of belief in some proposition. At least two separate constructs capture such degrees of belief: likelihoods capturing evidential balance and support capturing evidential weight. This paper explores the weight or justification that evidence affords propositions, with subjects communicating using a belief function in hypothetical legal situations, where justification is a relevant goal. Subjects evaluated the impact of sets of 1--3 pieces of evidence, varying in complexity, within a hypothetical legal situation. The study demonstrates the potential usefulness of this evidential weight measure as an alternative or complement to the more-studied probability measure. Subjects' responses indicated that weight and likelihood were distinguished; that subjects' evidential weight tended toward single elements in a targeted fashion; and, that there were identifiable individual differences in reactions to conflicting evidence. Specifically, most subjects reacted to conflicting evidence that supported disjoint sets of suspects with continued support in the implicated sets, although an identifiable minority reacted by pulling back their support, expressing indecisiveness. Such individuals would likely require a greater amount of evidence than the others to counteract this tendency in support. Thus, the study identifies the value of understanding evidential weight as distinct from likelihood, informs our understanding of the psychology of individuals' judgments of evidential weight, and furthers the application and meaningfulness of belief functions as a communication language.

  11. Safety Campaign Continues

    CERN Multimedia

    2002-01-01

    If you see this poster, stop and read it! This is the third poster produced by TIS Division as part of its information campaign on health and safety in the workplace. It provides statistics on occupational accidents at CERN. You will see that, as in the rest of Europe, falls, slips and trips continue to be the main cause of accident. So, eyes open and take care! For more information : http://safety.cern.ch/

  12. The ideal hydrogen demonstration platform

    Energy Technology Data Exchange (ETDEWEB)

    Alt, J. [Village Technology, Annapolis, MD (United States)

    2007-07-01

    This paper suggested that the best platform to demonstrate hydrogen's capability as an emission-free fuel regime is an urban pedestrian system. The on-grade bi-directional downtown people-mover was designed to fit in existing street-scapes without eliminating traffic lanes. The system is comprised of rubber-tired tram-buses that are synchronized to arrive at stop-boarding areas at the same time in order to provide a seamless headway along a single, dedicated guide-lane. The system was designed to operate along strategic urban corridors in order to reduce traffic congestion and air pollution. The vehicles are inductively charged with fixed fuel cell generators at stop-boarding areas. A single people-mover has the capacity to replace several thousand car trips and parking movements per day, or 8000 tonnes of carbon dioxide (CO{sub 2}). It was concluded that the system was designed to dovetail with fuel cell generator stations planned for private vehicles as they begin to be converted in the future. 8 figs.

  13. Demonstration of superconducting micromachined cavities

    Energy Technology Data Exchange (ETDEWEB)

    Brecht, T., E-mail: teresa.brecht@yale.edu; Reagor, M.; Chu, Y.; Pfaff, W.; Wang, C.; Frunzio, L.; Devoret, M. H.; Schoelkopf, R. J. [Department of Applied Physics, Yale University, New Haven, Connecticut 06511 (United States)

    2015-11-09

    Superconducting enclosures will be key components of scalable quantum computing devices based on circuit quantum electrodynamics. Within a densely integrated device, they can protect qubits from noise and serve as quantum memory units. Whether constructed by machining bulk pieces of metal or microfabricating wafers, 3D enclosures are typically assembled from two or more parts. The resulting seams potentially dissipate crossing currents and limit performance. In this letter, we present measured quality factors of superconducting cavity resonators of several materials, dimensions, and seam locations. We observe that superconducting indium can be a low-loss RF conductor and form low-loss seams. Leveraging this, we create a superconducting micromachined resonator with indium that has a quality factor of two million, despite a greatly reduced mode volume. Inter-layer coupling to this type of resonator is achieved by an aperture located under a planar transmission line. The described techniques demonstrate a proof-of-principle for multilayer microwave integrated quantum circuits for scalable quantum computing.

  14. Developmental Continuity? Crawling, Cruising, and Walking

    Science.gov (United States)

    Adolph, Karen E.; Berger, Sarah E.; Leo, Andrew J.

    2011-01-01

    This research examined developmental continuity between "cruising" (moving sideways holding onto furniture for support) and walking. Because cruising and walking involve locomotion in an upright posture, researchers have assumed that cruising is functionally related to walking. Study 1 showed that most infants crawl and cruise concurrently prior…

  15. Software Tools Used for Continuous Assessment

    Directory of Open Access Journals (Sweden)

    Corina SBUGHEA

    2016-04-01

    Full Text Available he present paper addresses the subject of continuous evaluation and of the IT tools that support it. The approach starts from the main concepts and methods used in the teaching process, according to the assessment methodology and, then, it focuses on their implementation in the Wondershare QuizCreator software.

  16. Atmospheric Aerosol Chemistry Analyzer: Demonstration of feasibility

    Energy Technology Data Exchange (ETDEWEB)

    Mroz, E.J.; Olivares, J.; Kok, G.

    1996-04-01

    This is the final report of a three-year, Laboratory-Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). The project objective was to demonstrate the technical feasibility of an Atmospheric Aerosol Chemistry Analyzer (AACA) that will provide a continuous, real-time analysis of the elemental (major, minor and trace) composition of atmospheric aerosols. The AACA concept is based on sampling the atmospheric aerosol through a wet cyclone scrubber that produces an aqueous suspension of the particles. This suspension can then be analyzed for elemental composition by ICP/MS or collected for subsequent analysis by other methods. The key technical challenge was to develop a wet cyclone aerosol sampler suitable for respirable particles found in ambient aerosols. We adapted an ultrasonic nebulizer to a conventional, commercially available, cyclone aerosol sampler and completed collection efficiency tests for the unit, which was shown to efficiently collect particles as small as 0.2 microns. We have completed the necessary basic research and have demonstrated the feasibility of the AACA concept.

  17. Camp Sacajawea Passive Solar Demonstration Project

    Energy Technology Data Exchange (ETDEWEB)

    1983-08-31

    The intent of the Passive Solar Demonstration Project was to have: an actual demonstration of the effectiveness of a passive solar design and working automatic shading devices; accurate data of energy saved by the passive design and shading devices; a brochure distributed to architects, builders, and consumers, with the monitoring data and information about the project; and the continued monitoring of the building to help explain to those who are using the building the value of the system; this would not only include the 7000 members, bu visitors and other users of the facility. To accomplish these goals, a monitoring system was installed in the recently build Passive Solar Lodge at Camp Sacajawea on Casper Mountain south of Casper, Wyoming. The building was monitored continously for the remainder of the project. The installation of the automatic shading device, a curtain wall was accomplished but had some difficulty. The results indicate there is some effectiveness of the Curtain Wall, but a quantitative value would be impossible at this time.

  18. Magnetic Launch Assist Demonstration Test

    Science.gov (United States)

    2001-01-01

    This image shows a 1/9 subscale model vehicle clearing the Magnetic Launch Assist System, formerly referred to as the Magnetic Levitation (MagLev), test track during a demonstration test conducted at the Marshall Space Flight Center (MSFC). Engineers at MSFC have developed and tested Magnetic Launch Assist technologies. To launch spacecraft into orbit, a Magnetic Launch Assist System would use magnetic fields to levitate and accelerate a vehicle along a track at very high speeds. Similar to high-speed trains and roller coasters that use high-strength magnets to lift and propel a vehicle a couple of inches above a guideway, a launch-assist system would electromagnetically drive a space vehicle along the track. A full-scale, operational track would be about 1.5-miles long and capable of accelerating a vehicle to 600 mph in 9.5 seconds. This track is an advanced linear induction motor. Induction motors are common in fans, power drills, and sewing machines. Instead of spinning in a circular motion to turn a shaft or gears, a linear induction motor produces thrust in a straight line. Mounted on concrete pedestals, the track is 100-feet long, about 2-feet wide and about 1.5-feet high. The major advantages of launch assist for NASA launch vehicles is that it reduces the weight of the take-off, the landing gear, the wing size, and less propellant resulting in significant cost savings. The US Navy and the British MOD (Ministry of Defense) are planning to use magnetic launch assist for their next generation aircraft carriers as the aircraft launch system. The US Army is considering using this technology for launching target drones for anti-aircraft training.

  19. Exoplanets: The Hunt Continues!

    Science.gov (United States)

    2001-04-01

    Swiss Telescope at La Silla Very Successful Summary The intensive and exciting hunt for planets around other stars ( "exoplanets" ) is continuing with great success in both hemispheres. Today, an international team of astronomers from the Geneva Observatory and other research institutes [1] is announcing the discovery of no less than eleven new, planetary companions to solar-type stars, HD 8574, HD 28185, HD 50554, HD 74156, HD 80606, HD 82943, HD 106252, HD 141937, HD 178911B, HD 141937, among which two new multi-planet systems . The masses of these new objects range from slightly less than to about 10 times the mass of the planet Jupiter [2]. The new detections are based on measured velocity changes of the stars [3], performed with the CORALIE spectrometer on the Swiss 1.2-m Leonard Euler telescope at the ESO La Silla Observatory , as well as with instruments on telescopes at the Haute-Provence Observatory and on the Keck telescopes on Mauna Kea (Hawaii, USA). Some of the new planets are unusual: * a two-planet system (around the star HD 82943) in which one orbital period is nearly exactly twice as long as the other - cases like this (refered to as "orbital resonance") are well known in our own solar system; * another two-planet system (HD 74156), with a Jupiter-like planet and a more massive planet further out; * a planet with the most elongated orbit detected so far (HD 80606), moving between 5 and 127 million kilometers from the central star; * a giant planet moving in an orbit around its Sun-like central star that is very similar to the one of the Earth and whose potential satellites (in theory, at least) might be "habitable". At this moment, there are 63 know exoplanet candidates with minimum masses below 10 Jupiter masses, and 67 known objects with minimum masses below 17 Jupiter masses. The present team of astronomers has detected about half of these. PR Photo 13a/01 : Radial-velocity measurements of HD 82943, a two-planet system . PR Photo 13b/01 : Radial

  20. Medium Duty Electric Vehicle Demonstration Project

    Energy Technology Data Exchange (ETDEWEB)

    Mackie, Robin J. D. [Smith Electric Vehicles Corporation, Kansas City, MO (United States)

    2015-05-31

    The Smith Electric Vehicle Demonstration Project (SDP) was integral to the Smith business plan to establish a manufacturing base in the United States (US) and produce a portfolio of All Electric Vehicles (AEV’s) for the medium duty commercial truck market. Smith focused on the commercial depot based logistics market, as it represented the market that was most ready for the early adoption of AEV technology. The SDP enabled Smith to accelerate its introduction of vehicles and increase the size of its US supply chain to support early market adoption of AEV’s that were cost competitive, fully met the needs of a diverse set of end users and were compliant with Federal safety and emissions requirements. The SDP accelerated the development and production of various electric drive vehicle systems to substantially reduce petroleum consumption, reduce vehicular emissions of greenhouse gases (GHG), and increase US jobs.