Assessing the potential of residential HVAC systems for demand-side management

NARCIS (Netherlands)

van der Klauw, Thijs; Hoogsteen, Gerwin; Gerards, Marco Egbertus Theodorus; Hurink, Johann L.; Feng, Xianyong; Hebner, Robert E.

This paper investigates the potential of residential heating, ventilation and air conditioning systems to contribute to dynamic demand-side management. Thermal models for seven houses in Austin, Texas are developed with the goal of using them in a planning based demand-side management methodology.

US EPA's photovoltaic demand-side management project. Report for September 1992-July 1993

International Nuclear Information System (INIS)

Kern, E.C.; Spiegel, R.J.

1993-01-01

The paper discusses an investigation of how photovoltaics (PV) may be used as both a pollution-mitigating energy replacement for fossil fuels and a demand-side management (DSM) option to reduce peak electrical demands of commercial and residential buildings. Eleven electric utilities are partners in this first nationwide demonstration of PV DSM. The approach is to install and monitor standardized PV systems in diverse geographic areas with varying solar energy resource and electric power demand, production, and cost conditions. The systems are being monitored for a year to record direct and diffuse irradiance, ambient air temperature, PV power generation, and building loads. Utilities are providing the electric system operations data needed to determine the pollution mitigation and peak demand reduction that can result from the PV electrical power generation

Data model for Demand Side Management

Directory of Open Access Journals (Sweden)

Simona-Vasilica OPREA

2017-08-01

Full Text Available Demand Side Management (DSM is a portfolio of measures to improve the energy system mainly at the consumption level. In this paper we propose a data model for DSM stating from the optimization methods approach in SMARTRADE project from different perspectives of several entities that include: Transmission System Operator (TSO/Distribution System Operators (DSOs perspectives in case of security/reliability concerns: minimum amount of load (or generation shedding; aggregators perspective in case of demand or generation shedding request: Which demand (or generators should be shed?; consumers perspective: load shifting (time-of-use (ToU tariffs and optimum contract strategies with the aggregators (also known as balancing responsible parties- BRP for load shedding.

Demand-side management and demand response in the Ontario energy sectors

International Nuclear Information System (INIS)

2004-01-01

A directive from the former Minister of Energy was received by the Ontario Energy Board (OEB), directing the Board to consult with stakeholders on options for the delivery of demand-side management (DSM) and demand response (DR) activities within the electricity sector, including the role of local distribution companies in such activities. The implementation costs were to be balanced with the benefits to both consumers and the entire system. The scope of the review was expanded by the Board to include the role of gas distribution companies in DSM. A consultation process was implemented and stakeholders were invited to participate. A series of recommendations was made, including: (1) a hybrid framework utilizing market-based and public-policy approaches should deliver DSM and DR activities in Ontario's energy markets, (2) DSM and DR activities should come under the responsibility of a central agency, (3) DSM and DR activities should be coordinated through cooperation between the Ministry of Energy, the Independent Electricity Market Operator (IMO) and the Ontario Energy Board, (4) regulatory mechanisms to induce gas distributors, electricity transmitters and electricity distributors to reduce distribution system losses should be put in place, (5) all electricity consumers should fund electricity DSM and some retail DR initiatives through a transparent, non-bypassable consumption charge, and (6) the Board should design, develop and deliver information to consumers regarding energy conservation, energy efficiency, load management, and cleaner sources of energy. refs., 4 figs

DSM [demand-side management] opportunities in Alberta: An economist's perspective

International Nuclear Information System (INIS)

Woodward, R.S.

1990-01-01

In Alberta, utility companies are placing increasing attention on demand-side management (DSM) as one option for meeting future demand. Some basic economic principles are provided to yield a guideline on how much a utility should be spending on DSM initiatives. For the case of financial incentives to customers, it is shown that subsidies based on sound economic principles will enable the utility to charge lower overall rates to customers receiving the subsidy without raising other customers' rates. Moving outside of a well-understood market-based system and into a fully centralized planning approach to DSM eliminates a critical link between utilities and their customers. In Alberta, DSM measures appropriate in other regions will not be appropriate due to the province's unique supply and demand characteristics. Most of Alberta's electricity supply comes from low-cost coal-fired plants. On the demand-side, there is a significant concentration of large industrial and commercial consumers, notably in the oil and gas industry, and there is essentially no demand for electric heating in homes since natural gas is very abundant. The Alberta integrated power system currently operates at a load factor of ca 77%, reflecting the large industrial demand and the absence of a winter peaking effect associated with electrical heating requirements. A relatively small difference in embedded and incremental electricity supply costs means that utilities have little to spend on DSM programs. The identification of cost-effective DSM opportunities, most of which are likely to be found in the industrial sector, requires a considerable amount of detailed information on consumer behavior and close collaboration between utility and customer

Electricity decision-making: New techniques for calculating statewide economic impacts from new power supply and demand-side management programs

Science.gov (United States)

Tegen, Suzanne Isabel Helmholz

This dissertation introduces new techniques for calculating and comparing statewide economic impacts from new coal, natural gas and wind power plants, as well as from demand-side management programs. The impetus for this work was two-fold. First, reviews of current literature and projects revealed that there was no standard way to estimate statewide economic impacts from new supply- and demand-side electricity options. Second, decision-makers who were interviewed stated that they were overwhelmed with data in general, but also lacked enough specific information about economic development impacts to their states from electricity, to make informed choices. This dissertation includes chapters on electricity decision-making and on economic impacts from supply and demand. The supply chapter compares different electricity options in three states which vary in natural resource content: Arizona, Colorado and Michigan. To account for differing capacity factors, resources are compared on a per-megawatt-hour basis. The calculations of economic impacts from new supply include: materials and labor for construction, operations, maintenance, fuel extraction, fuel transport, as well as property tax, financing and landowner revenues. The demand-side chapter compares residential, commercial and industrial programs in Iowa. Impact calculations include: incremental labor and materials for program planning, installation and operations, as well as sales taxes and electricity saved. Results from supply-side calculations in the three states analyzed indicate that adding new wind power can have a greater impact to a state's economy than adding new gas or coal power due to resource location, taxes and infrastructure. Additionally, demand-side management programs have a higher relative percentage of in-state dollar flow than supply-side solutions, though demand-side programs typically involve fewer MWh and dollars than supply-side generation. Methods for this dissertation include researching

Determining optimum levels of DSM [demand-side management] as a supply-side resource

International Nuclear Information System (INIS)

Giles, S.H.; Mitchell, E.D.

1990-01-01

San Diego Gas and Electric Company (SDGE) recommends the evaluation of demand-side management as a supply-side resource. The advantages of concurrent economic analysis of DSM options with other traditional sources represents a significant improvement over analysis either before or after the development of a resource plan. The evaluation of utility-sponsored DSM programs that provide system benefits that include deferment of capacity additions and improvements in more efficient system operation should be evaluated side-by-side with traditional resources that provide similar benefits. The utility decision to either provide capital costs to construct a power plant or make demand payments for a power purchase is directly analogous to the decision to provide funding for a DSM program that would defer these same investments. Both types of decision represent utility control over investment decisions that allow the utility to provide reliable, low-cost power to its customers. SDGE has also had experience with using generation expansion scenarios to test different levels of pre-selected packages of DSM programs, attempting to evaluate the total costs of system expansion for each of the different packages. This method was fraught with problems, and the best information that could be gained was if the selection of DSM packages happened to bracket a lower cost scenario, when it could reasonably be assumed that both smaller and larger levels of DSM were not as cost effective as the intermediate level. However, in many cases the selection of DSM programs did not produce this result and the important question of whether individual DSM programs were worthwhile when evaluated individually, or whether the lowest cost scenario would be improved with more or less DSM, could not be answered

Internet of Things, Challenges for Demand Side Management

Directory of Open Access Journals (Sweden)

Simona-Vasilica OPREA

2017-01-01

Full Text Available The adoption of any new product means also the apparition of new issues and challenges, and this is especially true when we talk about a mass adoption. The advent of Internet of Things (IoT devices will be, in the authors of this paper opinion, the largest and the fastest product adoption yet to be seen, as several early sources were predicting a volume of 50 billion IoT devices to be active by 2020 [1][2]. While later forecasts reduced the predicted amount to about 20-30 billion devices [3], even for such “reduced” number, demand side management issues are foreseeable, for the potential economic impact of IoT applications in 2025 will be between 3.9 and $11.1 trillion USD [4]. Not only that new patterns will emerge in energy consumption and Internet traffic, but we predict that the sheer amount of data produced by this quantity of IoT devices will give birth to a new sort of demand side management, the demand side management of IoT data. How will this work is yet to be seen but, at the current moment, one can at least identify the bits and pieces that will constitute it. This paper is intended to serve as short guide regarding the possible challenges raised by the adoption of IoT devices. The data types and structures, lifecycle and patterns will be briefly discussed throughout the following article.

Demand Side Management: An approach to peak load smoothing

Science.gov (United States)

Gupta, Prachi

A preliminary national-level analysis was conducted to determine whether Demand Side Management (DSM) programs introduced by electric utilities since 1992 have made any progress towards their stated goal of reducing peak load demand. Estimates implied that DSM has a very small effect on peak load reduction and there is substantial regional and end-user variability. A limited scholarly literature on DSM also provides evidence in support of a positive effect of demand response programs. Yet, none of these studies examine the question of how DSM affects peak load at the micro-level by influencing end-users' response to prices. After nearly three decades of experience with DSM, controversy remains over how effective these programs have been. This dissertation considers regional analyses that explore both demand-side solutions and supply-side interventions. On the demand side, models are estimated to provide in-depth evidence of end-user consumption patterns for each North American Electric Reliability Corporation (NERC) region, helping to identify sectors in regions that have made a substantial contribution to peak load reduction. The empirical evidence supports the initial hypothesis that there is substantial regional and end-user variability of reductions in peak demand. These results are quite robust in rapidly-urbanizing regions, where air conditioning and lighting load is substantially higher, and regions where the summer peak is more pronounced than the winter peak. It is also evident from the regional experiences that active government involvement, as shaped by state regulations in the last few years, has been successful in promoting DSM programs, and perhaps for the same reason we witness an uptick in peak load reductions in the years 2008 and 2009. On the supply side, we estimate the effectiveness of DSM programs by analyzing the growth of capacity margin with the introduction of DSM programs. The results indicate that DSM has been successful in offsetting the

Balancing islanded residential microgrids using demand side management

NARCIS (Netherlands)

Hoogsteen, Gerwin; van der Klauw, Thijs; Molderink, Albert; Hurink, Johann L.; Smit, Gerardus Johannes Maria; Feng, Xianyong; Hebner, Robert E.

2016-01-01

Now that the internet of things is emerging, control of domestic assets within the smart micro grids is also gaining interest. Furthermore, these micro grids may operate in islanded mode for short periods. Various demand side management approaches are presented in literature to control these assets.

Using demand-side management to decrease transformer ageing

NARCIS (Netherlands)

van der Klauw, Thijs; Gerards, Marco Egbertus Theodorus; Hurink, Johann L.

2016-01-01

The introduction of local, often uncontrollable, generation units as well as larger loads such as electric vehicles (EVs) causes an increasing amount of stress on our energy supply chain, specifically on the distribution grids. Demand-side management (DSM) is often seen as a potential technology to

Real-Time Demand Side Management Algorithm Using Stochastic Optimization

Directory of Open Access Journals (Sweden)

Moses Amoasi Acquah

2018-05-01

Full Text Available A demand side management technique is deployed along with battery energy-storage systems (BESS to lower the electricity cost by mitigating the peak load of a building. Most of the existing methods rely on manual operation of the BESS, or even an elaborate building energy-management system resorting to a deterministic method that is susceptible to unforeseen growth in demand. In this study, we propose a real-time optimal operating strategy for BESS based on density demand forecast and stochastic optimization. This method takes into consideration uncertainties in demand when accounting for an optimal BESS schedule, making it robust compared to the deterministic case. The proposed method is verified and tested against existing algorithms. Data obtained from a real site in South Korea is used for verification and testing. The results show that the proposed method is effective, even for the cases where the forecasted demand deviates from the observed demand.

Energy efficiency and demand side management. Complement or contradiction? The impact of energy efficiency measures on the potential for demand side management; Energieeffizienz und Lastflexibilisierung. Partner oder Gegenspieler? Der Einfluss von Energieeffizienzmassnahmen auf das Lastflexibilisierungspotenzial

Energy Technology Data Exchange (ETDEWEB)

Peraus, Sebastian [TU Muenchen (Germany). Maschinenwesen; Gruber, Anna; Roon, Serafin von [Forschungsgesellschaft fuer Energiewirtschaft mbH, Muenchen (Germany)

2013-02-01

The success of the so called ''Energiewende'' in Germany is based on two major elements: the improvements in energy efficiency and the increase of renewable energy sources (RES). But the supply of RES cannot always be regulated according to the electricity demand. As a result both flexible electricity generation and demand side management will become increasingly important. Consequently, it has to be discussed, whether the improvement of energy efficiency and demand side management could interfere. This publication will illustrate the possible impact of energy efficiency measures on the potential for demand side management.

An energy service company's perspective on demand-side management

International Nuclear Information System (INIS)

Bullock, C.G.

1993-01-01

In 1985, Massachusetts Electric Company held a bid for demand reduction to be supplied by energy service companies (ESCOs). It was one of the first demand-side management (DSM) bidding programs held in the United States. Since then, several DSM auctions have been held. Many people expected DSM bidding to be a key component in integrated resource planning. Many observed similarities with supply side bidding, and expected DSM bidding to grow according. Today, more than $2 billion annually is being spent by utilities on DSM programs. Less than $100 million is spent with ESCOs. This chapter explores some of the reasons for the current situation and suggests some alternatives, which could benefit all of the players

Demand-side mitigation options of the agricultural sector: potential, barriers and ways forward

Directory of Open Access Journals (Sweden)

Brunelle Thierry

2017-01-01

Full Text Available This paper reviews the potential and barriers of demand-side mitigation options in the agricultural sector based on the recent academic literature and on a survey conducted on a sample of 788 respondents living in France. The mitigation potential of such measures as reducing losses in the food supply chain and shifting diets toward less animal products is estimated to be particularly high, higher, in particular, than supply-side mitigation options. However, to ensure that these measures do not entail a reduction in protein intake, these estimations should consider both caloric and protein units, and take into account the digestibility differentials between protein sources. Our survey shows that people are relatively reluctant to eat more sustainably, preferring to reduce their emissions in other areas such as housing or equipment. This relative reluctance is mainly due to individual perceptions linked to health concerns, taste or habits. Some obstacles could easily be overcome through well-designed policies aiming to, for example, advertise a lower consumption of red meat for health benefits. National governments are, however, rather inactive on this topic, leaving the initiative to the civil society.

Report of the advisory group on demand-side management and demand response in Ontario in response to the Minister's directive to the Ontario Energy Board

International Nuclear Information System (INIS)

2003-01-01

The Ontario Energy Board was directed in June 2003 to consult with stakeholders to identify and review options for the delivery of demand-side management (DSM) and demand response (DR) activities within the electricity sector, including the role of local distribution companies (distributors) in such activities. A total of 118 stakeholders participated in the consultation process, and 31 representatives from all sectors were then invited to take part in an advisory working group to develop options to be considered by the Board when preparing the recommendations to the Minister. This report presents a consolidation of the Group's working documents and the results of deliberations both as a unit and in small groups. The best way to present the many newly developed models was as a single Central Agency model demonstrating variations in the role of the Central Agency and other players in the electricity market. The paper was divided into the following six sections: introduction; market issues; demand response framework option; central agency framework-alternative models; Ontario Energy Board-wires companies DSM framework; and, general issues

Impact of Demand Side Management in Active Distribution Networks

DEFF Research Database (Denmark)

Ponnaganti, Pavani; Bak-Jensen, Birgitte; Pillai, Jayakrishnan Radhakrishna

2017-01-01

Demand Side Management (DSM) is an efficient flexible program which helps distribution network operators to meet the future critical peak demand. It is executed in cases of not only technical issues like voltage sag or swell, transformer burdening, cable congestions, but also to increase the degree...... of visibility in the electricity markets. The aim of this paper is to find the optimal flexible demands that can be shifted to another time in order to operate the active distribution system within secure operating limits. A simple mechanism is proposed for finding the flexibility of the loads where electric...

An Enhanced System Architecture for Optimized Demand Side Management in Smart Grid

Directory of Open Access Journals (Sweden)

Anzar Mahmood

2016-04-01

Full Text Available Demand Side Management (DSM through optimization of home energy consumption in the smart grid environment is now one of the well-known research areas. Appliance scheduling has been done through many different algorithms to reduce peak load and, consequently, the Peak to Average Ratio (PAR. This paper presents a Comprehensive Home Energy Management Architecture (CHEMA with integration of multiple appliance scheduling options and enhanced load categorization in a smart grid environment. The CHEMA model consists of six layers and has been modeled in Simulink with an embedded MATLAB code. A single Knapsack optimization technique is used for scheduling and four different cases of cost reduction are modeled at the second layer of CHEMA. Fault identification and electricity theft control have also been added in CHEMA. Furthermore, carbon footprint calculations have been incorporated in order to make the users aware of environmental concerns. Simulation results prove the effectiveness of the proposed model.

Load building versus conservation as demand-side management objectives

International Nuclear Information System (INIS)

Kexel, D.T.

1994-01-01

This paper examines the economics of load building versus conservation as demand-side management objectives. Economic criteria to be used in evaluating each type of program from the perspectives of all impacted parties are provided. The impact of DSM programs on electric rates is shown to be a key focal point of a thorough evaluation

A future Demand Side Management (DSM) opportunity for utility as variable renewable penetrate scale up using agriculture.

Science.gov (United States)

Ines, A.; Bhattacharjee, A.; Modi, V.; Robertson, A. W.; Lall, U.; Kocaman Ayse, S.; Chaudhary, S.; Kumar, A.; Ganapathy, A.; Kumar, A.; Mishra, V.

2015-12-01

Energy demand management, also known as demand side management (DSM), is the modification of consumer demand for energy through various methods such as smart metering, incentive based schemes, payments for turning off loads or rescheduling loads. Usually, the goal of demand side management is to encourage the consumer to use less power during periods of peak demand, or to move the time of energy use to off-peak times. Peak demand management does not necessarily decrease total energy consumption, but could be expected to reduce the need for investments in networks and/or power plants for meeting peak demands. Electricity use can vary dramatically on short and medium time frames, and the pricing system may not reflect the instantaneous cost as additional higher-cost that are brought on-line. In addition, the capacity or willingness of electricity consumers to adjust to prices by altering elasticity of demand may be low, particularly over short time frames. In the scenario of Indian grid setup, the retail customers do not follow real-time pricing and it is difficult to incentivize the utility companies for continuing the peak demand supply. A question for the future is how deeper penetration of renewable will be handled? This is a challenging problem since one has to deal with high variability, while managing loss of load probabilities. In the case of managing the peak demand using agriculture, in the future as smart metering matures with automatic turn on/off for a pump, it will become possible to provide an ensured amount of water or energy to the farmer while keeping the grid energized for 24 hours. Supply scenarios will include the possibility of much larger penetration of solar and wind into the grid. While, in absolute terms these sources are small contributors, their role will inevitably grow but DSM using agriculture could help reduce the capital cost. The other option is of advancing or delaying pump operating cycle even by several hours, will still ensure

Impact of realistic communications for fast-acting demand side management

DEFF Research Database (Denmark)

Dambrauskas, Paulius; Syed, Mazheruddin H.; Blair, Steven M.

2017-01-01

The rising penetration of intermittent energy resources is increasing the need for more diverse electrical energy resources that are able to support ancillary services. Demand side management (DSM) has a significant potential to fulfil this role, but several challenges are still impeding the wide...

Modeling and Analysis of Commercial Building Electrical Loads for Demand Side Management

Science.gov (United States)

Berardino, Jonathan

In recent years there has been a push in the electric power industry for more customer involvement in the electricity markets. Traditionally the end user has played a passive role in the planning and operation of the power grid. However, many energy markets have begun opening up opportunities to consumers who wish to commit a certain amount of their electrical load under various demand side management programs. The potential benefits of more demand participation include reduced operating costs and new revenue opportunities for the consumer, as well as more reliable and secure operations for the utilities. The management of these load resources creates challenges and opportunities to the end user that were not present in previous market structures. This work examines the behavior of commercial-type building electrical loads and their capacity for supporting demand side management actions. This work is motivated by the need for accurate and dynamic tools to aid in the advancement of demand side operations. A dynamic load model is proposed for capturing the response of controllable building loads. Building-specific load forecasting techniques are developed, with particular focus paid to the integration of building management system (BMS) information. These approaches are tested using Drexel University building data. The application of building-specific load forecasts and dynamic load modeling to the optimal scheduling of multi-building systems in the energy market is proposed. Sources of potential load uncertainty are introduced in the proposed energy management problem formulation in order to investigate the impact on the resulting load schedule.

Air pollution impacts from demand-side management

International Nuclear Information System (INIS)

Hall, D.C.; Sandii Win, M.; Hall, J.V.

1995-01-01

Air-polluting emission rates and energy-efficiency ratings vary widely among power plants, depending on location, age and whether the power plant is repowered. Traditional regulations require installation of specified emission control equipment that varies among power plants. These regulations do not specify that utilities first dispatch the cleanest power plants as demand varies from peak to off-peak periods. This empirical analysis shows, for 2 years out of 20, that demand-side management (DSM) programs increase air pollution. One reason for this result is that regulations require installation of specific emission-control technology but do not provide the incentive to take actual emissions or their air quality impacts into account when operating the system. For certain types of air pollutants and in some regions, regulatory programs now include markets for tradable emission credits. Such programs may alter this incentive. (author)

The impact of demand side management strategies in the penetration of renewable electricity

International Nuclear Information System (INIS)

Pina, André; Silva, Carlos; Ferrão, Paulo

2012-01-01

High fuel costs, increasing energy security and concerns with reducing emissions have pushed governments to invest in the use of renewable energies for electricity generation. However, the intermittence of most renewable resources when renewable energy provides a significant share of the energy mix can create problems to electricity grids, which can be minimized by energy storage systems that are usually not available or expensive. An alternative solution consists on the use of demand side management strategies, which can have the double effect of reducing electricity consumption and allowing greater efficiency and flexibility in the grid management, namely by enabling a better match between supply and demand. This work analyzes the impact of demand side management strategies in the evolution of the electricity mix of Flores Island in the Azores archipelago which is characterized by high shares of renewable energy and therefore the introduction of more renewable energy sources makes it an interesting case study for testing innovative solutions. The electricity generation system is modeled in TIMES, a software which optimizes the investment and operation of wind and hydro plants until 2020 based on scenarios for demand growth, deployment of demand response technologies in the domestic sector and promotion of behavioral changes to eliminate standby power. The results show that demand side management strategies can lead to a significant delay in the investment on new generation capacity from renewable resources and improve the operation of the existing installed capacity. -- Highlights: ► Energy efficiency can help reduce the need for investment in more renewable energy. ► Dynamic demand helps increase the use of renewable energy in low demand periods. ► Around 40% of total consumption by domestic appliances is used as dynamic demand. ► The load of domestic appliances is mainly shifted to the 5:00 to 9:00 period.

A System Architecture for Autonomous Demand Side Load Management in Smart Buildings

DEFF Research Database (Denmark)

Costanzo, Giuseppe Tommaso; Zhu, Guchuan; Anjos, Miguel F.

2012-01-01

This paper presents a system architecture for load management in smart buildings which enables autonomous demand side load management in the smart grid. Being of a layered structure composed of three main modules for admission control, load balancing, and demand response management...... in multiple time-scales and allows seamless integration of diverse techniques for online operation control, optimal scheduling, and dynamic pricing. The design of a home energy manager based on this architecture is illustrated and the simulation results with Matlab/Simulink confirm the viability...

Demand side management program evaluation based on industrial and commercial field data

International Nuclear Information System (INIS)

Eissa, M.M.

2011-01-01

Demand Response is increasingly viewed as an important tool for use by the electric utility industry in meeting the growing demand for electricity. There are two basic categories of demand response options: time varying retail tariffs and incentive Demand Response Programs. is applying the time varying retail tariffs program, which is not suitable according to the studied load curves captured from the industrial and commercial sectors. Different statistical studies on daily load curves for consumers connected to 22 kV lines are classified. The load curve criteria used for classification is based on peak ratio and night ratio. The data considered here is a set of 120 annual load curves corresponding to the electric power consumption (the western area in the King Saudi Arabia (KSA)) of many clients in winter and some months in the summer (peak period). The study is based on real data from several Saudi customer sectors in many geographical areas with larger commercial and industrial customers. The study proved that the suitable Demand Response for the ESC is the incentive program. - Highlights: → Study helps in selecting the proper demand side program. → A credit will be given for the customers during summer months. → Reduction in the electric bill. → Monthly bill credit is decreased based on customers' peak load reduction. → Guide for applying the proper demand side program suitable for the utility and customers.

Neural network controller for Active Demand-Side Management with PV energy in the residential sector

International Nuclear Information System (INIS)

Matallanas, E.; Castillo-Cagigal, M.; Gutiérrez, A.; Monasterio-Huelin, F.; Caamaño-Martín, E.; Masa, D.; Jiménez-Leube, J.

2012-01-01

Highlights: ► We have developed a neural controller for Active Demand-Side Management. ► The controller consists of Multilayer Perceptrons evolved with a genetic algorithm. ► The architecture of the controller is distributed and modular. ► The simulations show that the electrical local behavior improves. ► Active Demand-Side Management helps users to control his energy behaviour. -- Abstract: In this paper, we describe the development of a control system for Demand-Side Management in the residential sector with Distributed Generation. The electrical system under study incorporates local PV energy generation, an electricity storage system, connection to the grid and a home automation system. The distributed control system is composed of two modules: a scheduler and a coordinator, both implemented with neural networks. The control system enhances the local energy performance, scheduling the tasks demanded by the user and maximizing the use of local generation.

Experimental determination of demand side management potential of wet appliances in the Netherlands

NARCIS (Netherlands)

Staats, M. R.; de Boer-Meulman, P. D M; van Sark, W. G J H M

2017-01-01

The potential of demand side management (DSM) of wet appliances (washing machine, dishwasher and tumble dryer) in households with photovoltaic (PV) systems is studied experimentally focusing on evening peak demand reduction and increase in PV self-consumption. In a sample of 100 Dutch households the

New vision of demand side management strategy as the main tool in cooperation suppliers and consumers of electrical energy

International Nuclear Information System (INIS)

Szkutnik, J.

2012-01-01

The paper presents the complex proposal for the implementation of the demand side management in the Polish energy sector. The issue of demand side management is well known in the world, European and domestic dimensions. The experience of western countries shows that at least to some extent, the demand side management strategy is already implemented there. However, Polish experience is far too insufficient. Demand side management consists in efficient management of energy demand as well as adoption of this demand i.e. changing the load. The decrease of energy consumption in the moment of its peak demand leads to the balance between the demand and supply in the system, which influences the market price of energy. If certain mechanisms are implemented that will cause that final receivers will be willing to adjust their demand for energy, we will create the Demand Response, which is an efficient tool in the demand side management strategy. It is assumed that electronic meters will bring a real quality change. The undertakings based on initiatives of the Polish Energy Regulatory Office that promote the concept of implementation of electronic metering in the Polish energy sector prove that Poland is determined to improve its energy efficiency. The report describes the concept of the electronic meters that enables the realisation of the demand side management strategy as well as other complementary solutions that make the strategy even more efficient. In this field, it is planned to establish a dedicated loyalty programmes for energy receivers. The concept includes also the combination of the model solutions with the campaign 'energy efficiency' organised by the Ministry of Economy, which aims at fulfilling the requirements of the directive 2006/32/EC on energy end-use efficiency and energy services. As complementary solution in this new vision to add the system of recycling of waste heat home appliance devices. (Author)

Industrial demand side management: A status report

Energy Technology Data Exchange (ETDEWEB)

Hopkins, M.F.; Conger, R.L.; Foley, T.J. [and others

1995-05-01

This report provides an overview of and rationale for industrial demand side management (DSM) programs. Benefits and barriers are described, and data from the Manufacturing Energy Consumption Survey are used to estimate potential energy savings in kilowatt hours. The report presents types and examples of programs and explores elements of successful programs. Two in-depth case studies (from Boise Cascade and Eli Lilly and Company) illustrate two types of effective DSM programs. Interviews with staff from state public utility commissions indicate the current thinking about the status and future of industrial DSM programs. A comprehensive bibliography is included, technical assistance programs are listed and described, and a methodology for evaluating potential or actual savings from projects is delineated.

Accurate Estimation of Target amounts Using Expanded BASS Model for Demand-Side Management

Science.gov (United States)

Kim, Hyun-Woong; Park, Jong-Jin; Kim, Jin-O.

2008-10-01

The electricity demand in Korea has rapidly increased along with a steady economic growth since 1970s. Therefore Korea has positively propelled not only SSM (Supply-Side Management) but also DSM (Demand-Side Management) activities to reduce investment cost of generating units and to save supply costs of electricity through the enhancement of whole national energy utilization efficiency. However study for rebate, which have influence on success or failure on DSM program, is not sufficient. This paper executed to modeling mathematically expanded Bass model considering rebates, which have influence on penetration amounts for DSM program. To reflect rebate effect more preciously, the pricing function using in expanded Bass model directly reflects response of potential participants for rebate level.

A Novel Prosumer-Based Energy Sharing and Management (PESM) Approach for Cooperative Demand Side Management (DSM) in Smart Grid

OpenAIRE

Sohail Razzaq; Rehman Zafar; Naveed Ahmed Khan; Asif Raza Butt; Anzar Mahmood

2016-01-01

Increasing population and modern lifestyle have raised energy demands globally. Demand Side Management (DSM) is one important tool used to manage energy demands. It employs an advanced power infrastructure along with bi-directional information flow among utilities and users in order to achieve a balanced load curve and minimize demand-supply mismatch. Traditionally, this involves shifting the electricity demand from peak hours to other times of the day in an optimized manner. Multiple users e...

Modulation strategies of integrated HVAC systems used in residential buildings for demand-side management at different scales

OpenAIRE

Georges, Emeline

2017-01-01

The integration of renewable energy sources in the electricity production mix has an important impact on the management of the electricity grid, due to their intermittency. In particular, to ensure grid balancing, there is a rising need for flexibility, both on the supply and demand sides. A possible solution to help achieve grid balancing is the smart modulation of the electrical load in a "demand following supply" scheme through demand-side management. In this context, the objective of...

Optimal Multi-scale Demand-side Management for Continuous Power-Intensive Processes

Science.gov (United States)

Mitra, Sumit

With the advent of deregulation in electricity markets and an increasing share of intermittent power generation sources, the profitability of industrial consumers that operate power-intensive processes has become directly linked to the variability in energy prices. Thus, for industrial consumers that are able to adjust to the fluctuations, time-sensitive electricity prices (as part of so-called Demand-Side Management (DSM) in the smart grid) offer potential economical incentives. In this thesis, we introduce optimization models and decomposition strategies for the multi-scale Demand-Side Management of continuous power-intensive processes. On an operational level, we derive a mode formulation for scheduling under time-sensitive electricity prices. The formulation is applied to air separation plants and cement plants to minimize the operating cost. We also describe how a mode formulation can be used for industrial combined heat and power plants that are co-located at integrated chemical sites to increase operating profit by adjusting their steam and electricity production according to their inherent flexibility. Furthermore, a robust optimization formulation is developed to address the uncertainty in electricity prices by accounting for correlations and multiple ranges in the realization of the random variables. On a strategic level, we introduce a multi-scale model that provides an understanding of the value of flexibility of the current plant configuration and the value of additional flexibility in terms of retrofits for Demand-Side Management under product demand uncertainty. The integration of multiple time scales leads to large-scale two-stage stochastic programming problems, for which we need to apply decomposition strategies in order to obtain a good solution within a reasonable amount of time. Hence, we describe two decomposition schemes that can be applied to solve two-stage stochastic programming problems: First, a hybrid bi-level decomposition scheme with

Generation of flexible domestic load profiles to evaluate demand side management approaches

NARCIS (Netherlands)

Hoogsteen, Gerwin; Molderink, Albert; Hurink, Johann L.; Smit, Gerardus Johannes Maria

2016-01-01

Various Demand Side Management (DSM) approaches have been developed the last couple of years to avoid costly grid upgrades. However, evaluation of these DSM methodologies is usually restricted to a use-case specific example, making comparison between different DSM approaches hard. This paper

A novel microgrid demand-side management system for manufacturing facilities

Science.gov (United States)

Harper, Terance J.

Thirty-one percent of annual energy consumption in the United States occurs within the industrial sector, where manufacturing processes account for the largest amount of energy consumption and carbon emissions. For this reason, energy efficiency in manufacturing facilities is increasingly important for reducing operating costs and improving profits. Using microgrids to generate local sustainable power should reduce energy consumption from the main utility grid along with energy costs and carbon emissions. Also, microgrids have the potential to serve as reliable energy generators in international locations where the utility grid is often unstable. For this research, a manufacturing process that had approximately 20 kW of peak demand was matched with a solar photovoltaic array that had a peak output of approximately 3 KW. An innovative Demand-Side Management (DSM) strategy was developed to manage the process loads as part of this smart microgrid system. The DSM algorithm managed the intermittent nature of the microgrid and the instantaneous demand of the manufacturing process. The control algorithm required three input signals; one from the microgrid indicating the availability of renewable energy, another from the manufacturing process indicating energy use as a percent of peak production, and historical data for renewable sources and facility demand. Based on these inputs the algorithm had three modes of operation: normal (business as usual), curtailment (shutting off non-critical loads), and energy storage. The results show that a real-time management of a manufacturing process with a microgrid will reduce electrical consumption and peak demand. The renewable energy system for this research was rated to provide up to 13% of the total manufacturing capacity. With actively managing the process loads with the DSM program alone, electrical consumption from the utility grid was reduced by 17% on average. An additional 24% reduction was accomplished when the microgrid

Exploring Tradeoffs in Demand-Side and Supply-Side Management of Urban Water Resources Using Agent-Based Modeling and Evolutionary Computation

Directory of Open Access Journals (Sweden)

Lufthansa Kanta

2015-11-01

Full Text Available Urban water supply systems may be managed through supply-side and demand-side strategies, which focus on water source expansion and demand reductions, respectively. Supply-side strategies bear infrastructure and energy costs, while demand-side strategies bear costs of implementation and inconvenience to consumers. To evaluate the performance of demand-side strategies, the participation and water use adaptations of consumers should be simulated. In this study, a Complex Adaptive Systems (CAS framework is developed to simulate consumer agents that change their consumption to affect the withdrawal from the water supply system, which, in turn influences operational policies and long-term resource planning. Agent-based models are encoded to represent consumers and a policy maker agent and are coupled with water resources system simulation models. The CAS framework is coupled with an evolutionary computation-based multi-objective methodology to explore tradeoffs in cost, inconvenience to consumers, and environmental impacts for both supply-side and demand-side strategies. Decisions are identified to specify storage levels in a reservoir that trigger: (1 increases in the volume of water pumped through inter-basin transfers from an external reservoir; and (2 drought stages, which restrict the volume of water that is allowed for residential outdoor uses. The proposed methodology is demonstrated for Arlington, Texas, water supply system to identify non-dominated strategies for an historic drought decade. Results demonstrate that pumping costs associated with maximizing environmental reliability exceed pumping costs associated with minimizing restrictions on consumer water use.

Demand-side management process evaluations - the management perspective

International Nuclear Information System (INIS)

Perrault, G.A.; Barrett, L.B.

1993-01-01

A demand-side management (DSM) process evaluation is a qualitative, expert assessment of how a utility marketing program is being conducted. It reviews the efficiency and effectiveness in which a utility plans, manages, executes, and monitors the delivery of DSM programs to its marketplace. Process evaluations,which includes load impact, customer satisfaction and cost-effectiveness analysis, are becoming an increasingly significant component. The process evaluation focus is on the program planning and delivery process as opposed to the energy impacts resulting from the specific measures or products of the program. Because of this process-oriented focus, such evaluations can identify important opportunities for improving the cost-effectiveness of a program without significantly changing product lines. The evaluation may identify administrative or delivery process improvements. In addition, the evaluation may identify ways of improving the degree to which the customer is satisfied with the program or the utility. Since process evaluations are usually conducted as part of a utility's mandated DSM measurement and evaluation plan, they tend to focus mainly on the stated needs of the regulator as opposed to company management. This can be a problem. Although the regulatory perspective is important, in an increasingly competitive business environment, utilities must not overlook management's business and operational needs for specific information regarding DSM program planning, control, execution, and evaluation. This paper discusses some of the conflicts that exist between the regulator's and management's needs for DSM program evaluation results and presents some approaches for assuring that both needs are met. It is organized to first discuss the scope of a process evaluation, then the evaluation issues, the management concerns, and finally reporting of results

Demand-side management and European environmental and energy goals: An optimal complementary approach

International Nuclear Information System (INIS)

Bergaentzlé, Claire; Clastres, Cédric; Khalfallah, Haikel

2014-01-01

Demand side management (DSM) in electricity markets could improve energy efficiency and achieve environmental targets through controlled consumption. For the past 10 years or so DSM programmes have registered significant results. However, detailed analysis of its real impact as observed by a large number of pilot studies suggests that such programmes need to be fine-tuned to suit clearly identified conditions. This study aims to provide recommendations for the instruments to be used to prompt demand response with a view to maximizing energy and environmental efficiencies of various countries. The present study suggests that different DSM models should be deployed depending on the specific generation mix in any given country. Beside the natural benefits from cross-borders infrastructures, DSM improves the flexibility and reliability of the energy system, absorbing some shock on generation mix. We show efficiency increases with demand response but at a decreasing rate. So, according to rebound and report effects, simple DSM tools could be preferred. - Highlights: • Demand side management could improve energy and environmental efficiency. • Several instruments should be used to achieve significant load-shedding. • DSM models should be deployed depending on generation mix. • Efficiency increases with demand response but at a decreasing rate. • Rebound and report effects reduce positive impacts

Indirect Control for Demand Side Management – A Conceptual Introduction

DEFF Research Database (Denmark)

Heussen, Kai; You, Shi; Biegel, Benjamin

2012-01-01

The concept of “indirect control” has become a relevant discussion term in relation to activation distributed and small-scale demand and generation units to provide resources for power system balancing. The term and its association with price signals has, however caused some confusion as to its...... correct definition, either as a control or a market concept. This paper aims to provide a conceptual introduction to "indirect control" for management of small and distributed demand side resources. A review of control concepts and an analysis of "indirectness" features are provided to create a framework...... for systematic classification of indirect control strategies. The concepts developed then enable a discussion of control performance and valuation of direct- and indirect control strategies....

A distributed algorithm for demand-side management: Selling back to the grid.

Science.gov (United States)

Latifi, Milad; Khalili, Azam; Rastegarnia, Amir; Zandi, Sajad; Bazzi, Wael M

2017-11-01

Demand side energy consumption scheduling is a well-known issue in the smart grid research area. However, there is lack of a comprehensive method to manage the demand side and consumer behavior in order to obtain an optimum solution. The method needs to address several aspects, including the scale-free requirement and distributed nature of the problem, consideration of renewable resources, allowing consumers to sell electricity back to the main grid, and adaptivity to a local change in the solution point. In addition, the model should allow compensation to consumers and ensurance of certain satisfaction levels. To tackle these issues, this paper proposes a novel autonomous demand side management technique which minimizes consumer utility costs and maximizes consumer comfort levels in a fully distributed manner. The technique uses a new logarithmic cost function and allows consumers to sell excess electricity (e.g. from renewable resources) back to the grid in order to reduce their electric utility bill. To develop the proposed scheme, we first formulate the problem as a constrained convex minimization problem. Then, it is converted to an unconstrained version using the segmentation-based penalty method. At each consumer location, we deploy an adaptive diffusion approach to obtain the solution in a distributed fashion. The use of adaptive diffusion makes it possible for consumers to find the optimum energy consumption schedule with a small number of information exchanges. Moreover, the proposed method is able to track drifts resulting from changes in the price parameters and consumer preferences. Simulations and numerical results show that our framework can reduce the total load demand peaks, lower the consumer utility bill, and improve the consumer comfort level.

Communications technologies for demand side management, DSM, and European utility communications architecture, EurUCA

Energy Technology Data Exchange (ETDEWEB)

Kaerkkaeinen, S.; Kekkonen, V. [VTT Energy, Espoo (Finland); Rissanen, P. [Tietosavo Oy (Finland)

1996-12-31

In this project the main target is to develop and assess methods for DSM (Demand Side Management) and distribution automation planning from the utility`s point of view. The final goal is to integrate these methods for the strategic planning of electric utilities. In practice the project is divided into four main parts: The development and assessment of DSM/IRP planning methods and cost/benefit analysis as a part of international co-operation (IEA DSM Agreement: Annex IV, European Cost/Benefit analysis of DSM, EUBC, and Finnish SAVE-project started in 1995 in co-operation with SRC International and six electric utilities in Finland); Development of PC-based DSM planning and assessment tools at VTT; Development of a decision support system of distribution network planning including DSM options at Tietosavo Oy and Integration of DSM planning and network planning tools in co-operation with VTT Energy and Tietosavo Oy

Communications technologies for demand side management, DSM, and European utility communications architecture, EurUCA

Energy Technology Data Exchange (ETDEWEB)

Kaerkkaeinen, S; Kekkonen, V [VTT Energy, Espoo (Finland); Rissanen, P [Tietosavo Oy (Finland)

1997-12-31

In this project the main target is to develop and assess methods for DSM (Demand Side Management) and distribution automation planning from the utility`s point of view. The final goal is to integrate these methods for the strategic planning of electric utilities. In practice the project is divided into four main parts: The development and assessment of DSM/IRP planning methods and cost/benefit analysis as a part of international co-operation (IEA DSM Agreement: Annex IV, European Cost/Benefit analysis of DSM, EUBC, and Finnish SAVE-project started in 1995 in co-operation with SRC International and six electric utilities in Finland); Development of PC-based DSM planning and assessment tools at VTT; Development of a decision support system of distribution network planning including DSM options at Tietosavo Oy and Integration of DSM planning and network planning tools in co-operation with VTT Energy and Tietosavo Oy

Demand side management. Benefits and challenges

International Nuclear Information System (INIS)

Strbac, Goran

2008-01-01

In this paper, the major benefits and challenges of electricity demand side management (DSM) are discussed in the context of the UK electricity system. The relatively low utilisation of generation and networks (of about 50%) means that there is significant scope for DSM to contribute to increasing the efficiency of the system investment. The importance of the diversity of electricity load is discussed and the negative effects of DSM on load diversity illustrated. Ageing assets, the growth in renewable and other low-carbon generation technologies and advances in information and communication technologies are identified as major additional drivers that could lead to wider applications of DSM in the medium term. Potential benefits of DSM are discussed in the context of generation and of transmission and distribution networks. The provision of back-up capacity by generation may not be efficient as it will be needed relatively infrequently, and DSM may be better placed to support security. We also present an analysis of the value of DSM in balancing generation and demand in a future UK electricity system with significant variable renewable generation. We give a number of reasons for the relatively slow uptake of DSM, particularly in the residential, commercial and small business sectors. They include a lack of metering, information and communication infrastructure, lack of understanding of the benefits of DSM, problems with the competitiveness of DSM when compared with traditional approaches, an increase in the complexity of system operation and inappropriate market incentives. (author)

Decision support program for congestion management using demand side flexibility

DEFF Research Database (Denmark)

Esmat, Ayman; Pinson, Pierre; Usaola, Julio

2017-01-01

In the past decades, Distribution System Operators (DSOs) have been mitigating distribution networks (DNs) contingencies by opting to grid reinforcements. However, this approach is not always cost and time efficient. Demand Side Flexibility (DSF) is one of the recent alternatives used in DNs cong...... effect is taken into consideration as well as the uncertain behavior of customers. Finally, the distribution grid of the Danish Bornholm Island is used to illustrate the merits of the DSP. The total cost incurred by the DSO is calculated and presented.......In the past decades, Distribution System Operators (DSOs) have been mitigating distribution networks (DNs) contingencies by opting to grid reinforcements. However, this approach is not always cost and time efficient. Demand Side Flexibility (DSF) is one of the recent alternatives used in DNs...... congestion management. Consequently, new market players such as aggregators are needed to handle DSF transaction between customers and DSOs. This paper proposes and models a decision support program (DSP) to optimize the total cost charged by the DSO for using DSF services. Moreover, the energy rebound...

Energy management in microgrid based on the multi objective stochastic programming incorporating portable renewable energy resource as demand response option

International Nuclear Information System (INIS)

Tabar, Vahid Sohrabi; Jirdehi, Mehdi Ahmadi; Hemmati, Reza

2017-01-01

Renewable energy resources are often known as cost-effective and lucrative resources and have been widely developed due to environmental-economic issues. Renewable energy utilization even in small scale (e.g., microgrid networks) has attracted significant attention. Energy management in microgrid can be carried out based on the generating side management or demand side management. In this paper, portable renewable energy resource are modeled and included in microgrid energy management as a demand response option. Utilizing such resources could supply the load when microgrid cannot serve the demand. This paper addresses energy management and scheduling in microgrid including thermal and electrical loads, renewable energy sources (solar and wind), CHP, conventional energy sources (boiler and micro turbine), energy storage systems (thermal and electrical ones), and portable renewable energy resource (PRER). Operational cost of microgrid and air pollution are considered as objective functions. Uncertainties related to the parameters are incorporated to make a stochastic programming. The proposed problem is expressed as a constrained, multi-objective, linear, and mixed-integer programing. Augmented Epsilon-constraint method is used to solve the problem. Final results and calculations are achieved using GAMS24.1.3/CPLEX12.5.1. Simulation results demonstrate the viability and effectiveness of the proposed method in microgrid energy management. - Highlights: • Introducing portable renewable energy resource (PRER) and considering effect of them. • Considering reserve margin and sensitivity analysis for validate robustness. • Multi objective and stochastic management with considering various loads and sources. • Using augmented Epsilon-constraint method to solve multi objective program. • Highly decreasing total cost and pollution with PRER in stochastic state.

Demand Side Management for the European Supergrid: Occupancy variances of European single-person households

International Nuclear Information System (INIS)

Torriti, Jacopo

2012-01-01

The prospect of a European Supergrid calls for research on aggregate electricity peak demand and Europe-wide Demand Side Management. No attempt has been made as yet to represent a time-related demand curve of residential electricity consumption at the European level. This article assesses how active occupancy levels of single-person households vary in single-person household in 15 European countries. It makes use of occupancy time-series data from the Harmonised European Time Use Survey database to build European occupancy curves; identify peak occupancy periods; construct time-related electricity demand curves for TV and video watching activities and assess occupancy variances of single-person households. - Highlights: ► Morning peak occupancies of European single households tale place between 7h30 and 7h40. ► Evening peaks take place between 20h10 and 20h20. ► TV and video activities during evening peaks make up about 3.1 GWh of European peak electricity load. ► Baseline and peak occupancy variances vary across countries. ► Baseline and peak occupancy variances can be used as input for Demand Side Management choices.

Evaluation of demand-side management programs

International Nuclear Information System (INIS)

Kolbe, A.L.; O'Loughlin, M.P.

1990-01-01

Over the past few years, the attention accorded to demand-side management (DSM) measures has called into question the traditional cost minimization approach for evaluating such programs. Two broad approaches to DSM seem to be generally used: one examining the problem from multiple perspectives and the other including various practical methods used in-house by utility planners. Whatever the standard used to evaluate DSM, there remains at least one problem which cannot be quantified. The customers who participate in a DSM program cannot only take into account the effects of DSM on their electricity bills; their comfort can also be affected. This lowering of comfort constitutes a legitimate cost which can explain why some apparently sensible DSM measures are not adopted. A method is proposed to incorporate this cost. It establishes a way to evaluate DSM program tradeoffs that, from the perspective of standard economic theory, maximizes social welfare; explains why at least one of the perspectives in the multiple perspective approach needs to be modified to incorporate all customer costs; and outlines how the proposed standard can be implemented. 8 refs

Distributed Demand Side Management with Battery Storage for Smart Home Energy Scheduling

Directory of Open Access Journals (Sweden)

Omowunmi Mary Longe

2017-01-01

Full Text Available The role of Demand Side Management (DSM with Distributed Energy Storage (DES has been gaining attention in recent studies due to the impact of the latter on energy management in the smart grid. In this work, an Energy Scheduling and Distributed Storage (ESDS algorithm is proposed to be installed into the smart meters of Time-of-Use (TOU pricing consumers possessing in-home energy storage devices. Source of energy supply to the smart home appliances was optimized between the utility grid and the DES device depending on energy tariff and consumer demand satisfaction information. This is to minimize consumer energy expenditure and maximize demand satisfaction simultaneously. The ESDS algorithm was found to offer consumer-friendly and utility-friendly enhancements to the DSM program such as energy, financial, and investment savings, reduced/eliminated consumer dissatisfaction even at peak periods, Peak-to-Average-Ratio (PAR demand reduction, grid energy sustainability, socio-economic benefits, and other associated benefits such as environmental-friendliness.

A distributed algorithm for demand-side management: Selling back to the grid

Directory of Open Access Journals (Sweden)

Milad Latifi

2017-11-01

Full Text Available Demand side energy consumption scheduling is a well-known issue in the smart grid research area. However, there is lack of a comprehensive method to manage the demand side and consumer behavior in order to obtain an optimum solution. The method needs to address several aspects, including the scale-free requirement and distributed nature of the problem, consideration of renewable resources, allowing consumers to sell electricity back to the main grid, and adaptivity to a local change in the solution point. In addition, the model should allow compensation to consumers and ensurance of certain satisfaction levels. To tackle these issues, this paper proposes a novel autonomous demand side management technique which minimizes consumer utility costs and maximizes consumer comfort levels in a fully distributed manner. The technique uses a new logarithmic cost function and allows consumers to sell excess electricity (e.g. from renewable resources back to the grid in order to reduce their electric utility bill. To develop the proposed scheme, we first formulate the problem as a constrained convex minimization problem. Then, it is converted to an unconstrained version using the segmentation-based penalty method. At each consumer location, we deploy an adaptive diffusion approach to obtain the solution in a distributed fashion. The use of adaptive diffusion makes it possible for consumers to find the optimum energy consumption schedule with a small number of information exchanges. Moreover, the proposed method is able to track drifts resulting from changes in the price parameters and consumer preferences. Simulations and numerical results show that our framework can reduce the total load demand peaks, lower the consumer utility bill, and improve the consumer comfort level. Keywords: Energy, Systems engineering, Electrical engineering

Renewable generation versus demand-side management. A comparison for the Spanish market

International Nuclear Information System (INIS)

Roldán Fernández, Juan Manuel; Burgos Payán, Manuel; Riquelme Santos, Jesús Manuel; Trigo García, Ángel Luis

2016-01-01

Conventionally the required instantaneous balance generation-load is achieved by adjusting production to fit variable consumer demand. Nowadays, a significant and increasing segment of generation is renewable. But renewable production cannot be scheduled on request since its generation is dependent on nature (wind, sun, …). In this context, demand-side management (DSM) would help since it would be advisable for part of the flexibility to be provided by the demand. The integration of renewable production and demand-side management (DSM), are compared in this work for Spain throughout 2008–2014. First a qualitative model, based on the linearization of the wholesale market, is employed to explore some hypotheses. A set of scenarios are then examined to quantify the main effects on the market. The results show that DSM exhibits the best performance in terms of economic efficiency and environmental sustainability, as well as for the reduction of load peaks and losses in the system, what suggests the convenience of promoting plans for the replacement of equipment with other more efficient as well as the implementation of real-time tariffs. - Highlights: •The impact of the integration of renewable production versus DSM has been compared. •Merit-order effect related to energy efficiency and to load-shifting is identified. •Large industries achieve energy efficiency with less CAPEX than renewable generation. •Load-shifting cycle yields a reduction of the traded energy and the economic volume.

Province gets serious about demand management

International Nuclear Information System (INIS)

Anon

2003-01-01

Directives from the Minister to the Ontario Energy Board to review options for demand-side management and demand reduction activities, and discussion papers describing the policy framework needed to implement demand management, are indications of renewed interest by the provincial government in demand-side management of Ontario's electric power supply. This renewed interest comes on the hills of a 5.5 per cent increase in electricity use, a 33 per cent increase in imports, and consumption records broken in 10 of the last 12 months. A 117-page study was released in April by Navigant Consulting, entitled 'Demand response blueprint for Ontario' which estimates that if the Ontario market had 250 MW of additional demand response, customers providing the demand response would have saved $20 million by reducing their demand when HOEP was greater than $120/MWh, while other customers would have saved $170 million due to lower HOEP, and would have enjoyed greater reliability as a result of the increase in reserve margins. Other than price signals to induce customers to save, the Navigant report suggest paying customers not to consume during peak periods. The report estimates that such a policy could generate a total demand response of 350 MW and a $235 million reduction in revenue to generators. The Navigan report also includes a large number of detailed analysis and recommendations. One among them is for the extensive use of interval meters for customers with loads over 200 kW. The report tends to be critical of the recent price freeze ordered by the Ontario government, claiming that the freeze could increase consumption, making prices more volatile and increasing the cost to the government even more. Successful demand response programs from California, New York and the New England states are cited as examples for Ontario to emulate

Development of assessment model for demand-side management investment programs in Korea

International Nuclear Information System (INIS)

Lee, Deok Ki; Park, Sang Yong; Park, Soo Uk

2007-01-01

The goal of this study is the development of the assessment model for demand-side management investment programs (DSMIPs) in the areas of natural gas and district heating. Demand-side management (DSM) is the process of managing the consumption of energy to optimize available and planned generation resources and DSMIPs are the actions conducted by energy suppliers to promote investment in the DSM. In this research, the analytic hierarchy process (AHP) method was used to develop a scientific and rational assessment model for DSMIPs. To apply the AHP method, assessment indicators for the assessment have been identified by using the concept of 'plan, do, see' and the decision-making hierarchy was established. Then AHP model was developed to set up the priorities of assessment indicators and a survey of experts from government and energy suppliers was carried out. Finally, the priorities of assessment indicators were calculated based on the result of survey using the AHP method. The assessment model developed from this research will actually be used to assess the results of DSMIPs, which is being carried out by Korea gas corporation (KOGAS) and Korea district heating corporation (KDHC). The use of the assessment model developed by this research is expected to contribute to enhance efficiency in planning, execution, and assessment of DSMIPs

A scoping study: demand side measures on the UK electrical system

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-07-01

The study is intended to eventually bring about a number of improvements in the UK electrical system, particularly in regard to Demand Side Management (DSM). Among the benefits envisaged are (a) increased security of supply when the network is under stress; (b) reduction in costs; (c) simpler outage management; (d) carbon saving and (e) increased energy efficiency. So far, these potential benefits have attracted little attention in the residential and small business sectors of the market: suggested reasons for this are listed. Taking into account the experience of other countries, three options are presented for a UK DSM programme: they are (i) customer initiated; (ii) supplier initiated and (iii) distributor initiated. At present, all the suggested options need further study and to aid the development for small customers, five possible initiatives are suggested. This final report (95 pages) includes a detailed description of the research required and a tender process for a customer-initiated programme. The report was prepared by KEMA Limited under contract to the DTI.

A scoping study: demand side measures on the UK electrical system

International Nuclear Information System (INIS)

2005-01-01

The study is intended to eventually bring about a number of improvements in the UK electrical system, particularly in regard to Demand Side Management (DSM). Among the benefits envisaged are (a) increased security of supply when the network is under stress; (b) reduction in costs; (c) simpler outage management; (d) carbon saving and (e) increased energy efficiency. So far, these potential benefits have attracted little attention in the residential and small business sectors of the market: suggested reasons for this are listed. Taking into account the experience of other countries, three options are presented for a UK DSM programme: they are (i) customer initiated; (ii) supplier initiated and (iii) distributor initiated. At present, all the suggested options need further study and to aid the development for small customers, five possible initiatives are suggested. This final report (95 pages) includes a detailed description of the research required and a tender process for a customer-initiated programme. The report was prepared by KEMA Limited under contract to the DTI

Demand side participation for frequency containment in the web of cells architecture

NARCIS (Netherlands)

Syed, M.H.; Burt, G.M.; Kok, J.K.; Hulst, R. d

2015-01-01

A large number of demand side management schemes have been proposed in literature for provision of frequency control ancillary services to the network. However, it is assumed that all the flexible devices within the network are managed and controlled under one demand side management (DSM) scheme. In

Intelligent demand side management of residential building energy systems

Science.gov (United States)

Sinha, Maruti N.

Advent of modern sensing technologies, data processing capabilities and rising cost of energy are driving the implementation of intelligent systems in buildings and houses which constitute 41% of total energy consumption. The primary motivation has been to provide a framework for demand-side management and to improve overall reliability. The entire formulation is to be implemented on NILM (Non-Intrusive Load Monitoring System), a smart meter. This is going to play a vital role in the future of demand side management. Utilities have started deploying smart meters throughout the world which will essentially help to establish communication between utility and consumers. This research is focused on investigation of a suitable thermal model of residential house, building up control system and developing diagnostic and energy usage forecast tool. The present work has considered measurement based approach to pursue. Identification of building thermal parameters is the very first step towards developing performance measurement and controls. The proposed identification technique is PEM (Prediction Error Method) based, discrete state-space model. The two different models have been devised. First model is focused toward energy usage forecast and diagnostics. Here one of the novel idea has been investigated which takes integral of thermal capacity to identify thermal model of house. The purpose of second identification is to build up a model for control strategy. The controller should be able to take into account the weather forecast information, deal with the operating point constraints and at the same time minimize the energy consumption. To design an optimal controller, MPC (Model Predictive Control) scheme has been implemented instead of present thermostatic/hysteretic control. This is a receding horizon approach. Capability of the proposed schemes has also been investigated.

Development of planning methods for demand-side management (DSM)

International Nuclear Information System (INIS)

Kaerkkaeinen, S.; Kekkonen, V.; Rissanen, P.

1995-01-01

The interest of utilities and governmental agencies in Demand-side management (IDSM) and Integrated Resource Planning (IRP) has increased during recent years also in Finland. From the governmental point of view, the main reason for this has been concern about the environmental effects of electricity supply and consumption. Utilities are mainly interested in cost reductions in electricity supply and distribution caused by DSM. Also improved service to the customer due to DSM has increasing value to utilities. In this project, the main target has been to develop and assess methods for DSM planning from the utility point of view. The final goal is to integrate these methods into the strategic planning of electric utilities

A Smart Grid Framework for Optimally Integrating Supply-Side, Demand-Side and Transmission Line Management Systems

Directory of Open Access Journals (Sweden)

Chukwuka Monyei

2018-04-01

Full Text Available A coordinated centralized energy management system (ConCEMS is presented in this paper that seeks to integrate for optimal grid operation—the supply side energy management system (SSEMS, home energy management system (HEMS and transmission line management system (TLMS. ConCEMS in ensuring the optimal operation of an IEEE 30-bus electricity network harmonizes the individual objective function of SSEMS, HEMS and TLMS to evolve an optimal dispatch of participating demand response (DR loads that does not violate transmission line ampacity limits (TLMS constraint while minimizing consumer cost (HEMS constraint and supply side operations cost (SSEMS constraint. An externally constrained genetic algorithm (ExC-GA that is influenced by feedback from TLMS is also presented that intelligently varies the dispatch time of participating DR loads to meet the individual objective functions. Hypothetical day ahead dynamic pricing schemes (Price1, Price2 and Price3 have also been adopted alongside an existing time of use (Price0 pricing scheme for comparison and discussion while a dynamic thermal line rating (DTLR algorithm has also been incorporated to dynamically compute power limits based on real time associated data.

Modeling Supermarket Refrigeration Systems for Demand-Side Management

Directory of Open Access Journals (Sweden)

Jakob Stoustrup

2013-02-01

Full Text Available Modeling of supermarket refrigeration systems for supervisory control in the smart grid is presented in this paper. A modular modeling approach is proposed in which each module is modeled and identified separately. The focus of the work is on estimating the power consumption of the system while estimating the cold reservoir temperatures as well. The models developed for each module as well as for the overall integrated system are validated by real data collected from a supermarket in Denmark. The results show that the model is able to estimate the actual electrical power consumption with a high fidelity. Moreover a simulation benchmark is introduced based on the produced model for demand-side management in smart grid. Finally, a potential application of the proposed benchmark in direct control of the power/energy consumption is presented by a simple simulation example.

Metering systems and demand-side management models applied to hybrid renewable energy systems in micro-grid configuration

International Nuclear Information System (INIS)

Blasques, L.C.M.; Pinho, J.T.

2012-01-01

This paper proposes a demand-side management model integrated to a metering system for hybrid renewable energy systems in micro-grid configuration. The proposal is based on the management problems verified in most of this kind of renewable hybrid systems installed in Brazil. The main idea is the implementation of a pre-paid metering system with some control functions that directly act on the consumer demand, restricting the consumption proportionally to the monthly availability of renewable energy. The result is a better distribution of the electricity consumption by month and by consumer, preventing that only one user, with larger purchasing power, consumes all the renewable energy available at some time period. The proportionality between the consumption and the renewable energy's availability has the objective to prevent a lack of energy stored and a high use of the diesel generator-set on months of low renewable potential. This paper also aims to contribute to the Brazilian regulation of renewable energy systems supplying micro-grids. - Highlights: ► Review of the Brazilian electricity regulation for small-scale isolated systems. ► Renewable systems are the most feasible option in several isolated communities. ► One proposal is to guarantee government subsidies for renewable energy systems. ► Smart electronic meters to create electricity restrictions for the consumers.

Hawaii demand-side management resource assessment. Final report: DSM opportunity report

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-08-01

The Hawaii Demand-Side Management Resource Assessment was the fourth of seven projects in the Hawaii Energy Strategy (HES) program. HES was designed by the Department of Business, Economic Development, and Tourism (DBEDT) to produce an integrated energy strategy for the State of Hawaii. The purpose of Project 4 was to develop a comprehensive assessment of Hawaii`s demand-side management (DSM) resources. To meet this objective, the project was divided into two phases. The first phase included development of a DSM technology database and the identification of Hawaii commercial building characteristics through on-site audits. These Phase 1 products were then used in Phase 2 to identify expected energy impacts from DSM measures in typical residential and commercial buildings in Hawaii. The building energy simulation model DOE-2.1E was utilized to identify the DSM energy impacts. More detailed information on the typical buildings and the DOE-2.1E modeling effort is available in Reference Volume 1, ``Building Prototype Analysis``. In addition to the DOE-2.1E analysis, estimates of residential and commercial sector gas and electric DSM potential for the four counties of Honolulu, Hawaii, Maui, and Kauai through 2014 were forecasted by the new DBEDT DSM Assessment Model. Results from DBEDTs energy forecasting model, ENERGY 2020, were linked with results from DOE-2.1E building energy simulation runs and estimates of DSM measure impacts, costs, lifetime, and anticipated market penetration rates in the DBEDT DSM Model. Through its algorithms, estimates of DSM potential for each forecast year were developed. Using the load shape information from the DOE-2.1E simulation runs, estimates of electric peak demand impacts were developed. 10 figs., 55 tabs.

Supply shortage forecast in Ontario: The significance of demand-side management (DSM); its tools and techniques

International Nuclear Information System (INIS)

Saini, S.

2004-01-01

Aspects of the recent report by the Ontario Electricity Conservation and Supply Task Force and Independent Market Operator which forecasts acute power supply shortages in Ontario, are discussed. Immediate action is recommended to avert the problem. The principal recommendation concerns the adoption of Demand Side Management as a tool to reduce the widening gap between supply and demand, citing supply shortage, imports, high prices, deregulated market and environmental concerns as the driving forces which push for the adoption of DSM. It is claimed that DSM, through its tools such as Demand/Load Response Programs and Time-of-Use rates has the capacity to create the necessary balance between supply and demand more efficiently, and in a more timely fashion than supply side management. The demand for adoption of DSM is justified on the basis of a careful examination of the magnitude and significance of each of the driving forces affecting the electricity supply in Ontario, as well as the benefits and techniques of DSM designed to manage power shortages. Energy Conservation and Efficiency and Demand/Load Response Programs are discussed as the principal DSM techniques, while Dynamic/Real Time Pricing, Time-of-Use Rates, Automated /Smart Metering, Web-based/Communication Systems, Reliability-based Programs, Market/Price-based programs, and Types of Load Control are described as the principal tools used by DSM. DSM program approaches and strategies are also reviewed, along with a brief list of successful examples of DSM applications. 3 figs

Supply shortage forecast in Ontario: The significance of demand-side management (DSM); its tools and techniques

Energy Technology Data Exchange (ETDEWEB)

Saini, S.

2004-06-01

Aspects of the recent report by the Ontario Electricity Conservation and Supply Task Force and Independent Market Operator which forecasts acute power supply shortages in Ontario, are discussed. Immediate action is recommended to avert the problem. The principal recommendation concerns the adoption of Demand Side Management as a tool to reduce the widening gap between supply and demand, citing supply shortage, imports, high prices, deregulated market and environmental concerns as the driving forces which push for the adoption of DSM. It is claimed that DSM, through its tools such as Demand/Load Response Programs and Time-of-Use rates has the capacity to create the necessary balance between supply and demand more efficiently, and in a more timely fashion than supply side management. The demand for adoption of DSM is justified on the basis of a careful examination of the magnitude and significance of each of the driving forces affecting the electricity supply in Ontario, as well as the benefits and techniques of DSM designed to manage power shortages. Energy Conservation and Efficiency and Demand/Load Response Programs are discussed as the principal DSM techniques, while Dynamic/Real Time Pricing, Time-of-Use Rates, Automated /Smart Metering, Web-based/Communication Systems, Reliability-based Programs, Market/Price-based programs, and Types of Load Control are described as the principal tools used by DSM. DSM program approaches and strategies are also reviewed, along with a brief list of successful examples of DSM applications. 3 figs.

Optimization Models and Methods for Demand-Side Management of Residential Users: A Survey

Directory of Open Access Journals (Sweden)

Antimo Barbato

2014-09-01

Full Text Available The residential sector is currently one of the major contributors to the global energy balance. However, the energy demand of residential users has been so far largely uncontrollable and inelastic with respect to the power grid conditions. With the massive introduction of renewable energy sources and the large variations in energy flows, also the residential sector is required to provide some flexibility in energy use so as to contribute to the stability and efficiency of the electric system. To address this issue, demand management mechanisms can be used to optimally manage the energy resources of customers and their energy demand profiles. A very promising technique is represented by demand-side management (DSM, which consists in a proactive method aimed at making users energy-efficient in the long term. In this paper, we survey the most relevant studies on optimization methods for DSM of residential consumers. Specifically, we review the related literature according to three axes defining contrasting characteristics of the schemes proposed: DSM for individual users versus DSM for cooperative consumers, deterministic DSM versus stochastic DSM and day-ahead DSM versus real-time DSM. Based on this classification, we provide a big picture of the key features of different approaches and techniques and discuss future research directions.

The energy efficiency and demand side management programs as implemented by the energy efficiency division of the department of energy

International Nuclear Information System (INIS)

Anunciacion, Jesus C.

1997-01-01

The thrust of the Philippine energy sector. specifically the government side, is to involve the active participation of not only all the government agencies involved in energy activities but the private sector as well. This participation shall mean technical and financial participation, directly and indirectly. The Department of Energy is on the process involving the continuing update and development of a Philippine Energy Plan (PEP) which has a 30-year time scope, which will help the country monitor and determine energy supply and demand vis-a-vis the growing demands of an industrializing country like the Philippines. Among the most vital component of the PEP is the thrust to pursue national programs for energy efficiency and demand-side management. Seven energy efficiency sub-programs have been identified for implementation, with a target savings of 623 million barrels of fuel oil equivalent (MMBFOE). A cumulative net savings of 237 billion pesos shall be generated against a total investment cost of 54.5 billion pesos. The Philippine energy sector will continue to develop and implement strategies to promote the efficient utilization of energy which will cover all aspects of the energy industry. The plan is focussed on the training and education of the various sectors on the aspects involved in the implementation of energy efficiency and demand-side management elements on a more aggressive note. The implementation of technical strategies by the department will continue on a higher and more extensive level, these are: energy utilization monitoring, consultancy and engineering services, energy efficiency testing and labelling program, and demand-side management programs for each sector. In summary, the PEP, as anchored in energy efficiency and demand-side management tools, among others, will ensure a continuous energy supply at affordable prices while incorporating environmental and social considerations. (author)

DEMONSTRATION OF THE ENVIRONMENTAL AND DEMAND-SIDE MANAGEMENT BENEFITS OF GRID-CONNECTED PHOTOVOLTAIC POWER SYSTEMS

Science.gov (United States)

This study investigated the pollutant emission reduction and demand-side management potential of 16 photovoltaic (PV) systems installed across the U.S. in 1993 and 1994. The project was sponsored by the U.S. Environmental Protection Agency (EPA) and 11 electric utilities. This ar...

Who should pay for demand-side management programs?

International Nuclear Information System (INIS)

Flaim, T.

1992-01-01

Traditional utility resource planning involves taking the load forecast as a given and then determining the additional supply resources expected to serve that load at minimum cost and optimal levels of reliability. With integrated planning, the goal is still to balance supply and demand, but in a way that is most cost effective given all possible ways to serve customers' energy service needs. The new element in integrated resource planning is demand side management (DSM) or activities aimed at altering the quantity of energy customers use and/or the timing of their consumption. This paper discusses how DSM works to accomplish energy conservation and how it affects the rate structure. It also goes on to discuss how a utility can optimize the participation in a conservation program so that no particular group might have to carry the brunt of a rate increase. These suggestions include aligning rates to accurately reflect marginal costs; require participating customers to pay as many program costs as are possible; where participating customers can't pay full cost of a program, restrict costs to those groups who are eligible to participate; and offer a 'reverse shared-savings' program to the largest customers. The paper goes on to discuss electric-to-gas fuel switching and what customers should carry the cost burden for this type of switching

Simulation of the Demand Side Management impacts: resolution enhancement of the input parameters at the local scale

International Nuclear Information System (INIS)

Imbert, P.

2011-01-01

Following the integrated energy planning paradigm in the 90's and the recent renewal of decentralized energy planning interests, Demand Side Management (DSM) actions are expected to take a significant role on energy planning activities in the future. Indeed the DSM actions represent a relevant option to achieve environmental and energy commitments or to alleviate some specific problems of electricity supply. DSM actions at the local scale at least in the French context is observed today. There is a need for appropriate methods and tools to assess the impacts of such MDE programs at local level. The local scale involves taking into account the specificities of the territories (physical, social, geographical, economical, institutional, etc.) The objective of this thesis is to improve the spatial resolution of input variables for the use in DSM action simulation tools. Based on a case study in France (PREMIO project: smart architecture for load management applied to a district) and an existing simulation tool we will study the impacts of this local experience to several municipalities. (author)

Demand-Side Energy Management Based on Nonconvex Optimization in Smart Grid

Directory of Open Access Journals (Sweden)

Kai Ma

2017-10-01

Full Text Available Demand-side energy management is used for regulating the consumers’ energy usage in smart grid. With the guidance of the grid’s price policy, the consumers can change their energy consumption in response. The objective of this study is jointly optimizing the load status and electric supply, in order to make a tradeoff between the electric cost and the thermal comfort. The problem is formulated into a nonconvex optimization model. The multiplier method is used to solve the constrained optimization, and the objective function is transformed to the augmented Lagrangian function without constraints. Hence, the Powell direction acceleration method with advance and retreat is applied to solve the unconstrained optimization. Numerical results show that the proposed algorithm can achieve the balance between the electric supply and demand, and the optimization variables converge to the optimum.

Distributed Optimisation Algorithm for Demand Side Management in a Grid-Connected Smart Microgrid

Directory of Open Access Journals (Sweden)

Omowunmi Mary Longe

2017-06-01

Full Text Available The contributions of Distributed Energy Generation (DEG and Distributed Energy Storage (DES for Demand Side Management (DSM purposes in a smart macrogrid or microgrid cannot be over-emphasised. However, standalone DEG and DES can lead to under-utilisation of energy generation by consumers and financial investments; in grid-connection mode, though, DEG and DES can offer arbitrage opportunities for consumers and utility provider(s. A grid-connected smart microgrid comprising heterogeneous (active and passive smart consumers, electric vehicles and a large-scale centralised energy storage is considered in this paper. Efficient energy management by each smart entity is carried out by the proposed Microgrid Energy Management Distributed Optimisation Algorithm (MEM-DOA installed distributively within the network according to consumer type. Each smart consumer optimises its energy consumption and trading for comfort (demand satisfaction and profit. The proposed model was observed to yield better consumer satisfaction, higher financial savings, and reduced Peak-to-Average-Ratio (PAR demand on the utility grid. Other associated benefits of the model include reduced investment on peaker plants, grid reliability and environmental benefits. The MEM-DOA also offered participating smart consumers energy and tariff incentives so that passive smart consumers do not benefit more than active smart consumers, as was the case with some previous energy management algorithms.

Adaptive heat pump and battery storage demand side energy management

Science.gov (United States)

Sobieczky, Florian; Lettner, Christian; Natschläger, Thomas; Traxler, Patrick

2017-11-01

An adaptive linear model predictive control strategy is introduced for the problem of demand side energy management, involving a photovoltaic device, a battery, and a heat pump. Moreover, the heating influence of solar radiation via the glass house effect is considered. Global sunlight radiation intensity and the outside temperature are updated by weather forecast data. The identification is carried out after adapting to a time frame witch sufficiently homogeneous weather. In this way, in spite of the linearity an increase in precision and cost reduction of up to 46% is achieved. It is validated for an open and closed loop version of the MPC problem using real data of the ambient temperature and the global radiation.

Ensuring the security of electricity supply in Ontario: is demand-side management the answer?

International Nuclear Information System (INIS)

Chuddy, B.

2004-01-01

This paper examines the issues relating to ensuring the security of electricity supply in Ontario. In particular, it focuses on demand-side management as a means of achieving these objectives. The solution involves both conservation and supply. It is therefore critical that there be investment in new supply with multiple buyers/sellers. regulatory environment and pricing could encourage conservation

Optimal Load Response to Time-of-Use Power Price for Demand Side Management in Denmark

DEFF Research Database (Denmark)

Hu, Weihao; Chen, Zhe; Bak-Jensen, Birgitte

2010-01-01

-of-use power price for demand side management in order to save the energy costs as much as possible. 3 typical different kinds of loads (industrial load, residential load and commercial load) in Denmark are chosen as study cases. The energy costs decrease up to 9.6% with optimal load response to time......-of-use power price for different loads. Simulation results show that the optimal load response to time-of-use power price for demand side management generates different load profiles and reduces the load peaks. This kind of load patterns may also have significant effects on the power system normal operation.......Since the hourly spot market price is available one day ahead in Denmark, the price could be transferred to the consumers and they may shift their loads from high price periods to the low price periods in order to save their energy costs. This paper presents a load optimization method to time...

A Novel Prosumer-Based Energy Sharing and Management (PESM Approach for Cooperative Demand Side Management (DSM in Smart Grid

Directory of Open Access Journals (Sweden)

Sohail Razzaq

2016-10-01

Full Text Available Increasing population and modern lifestyle have raised energy demands globally. Demand Side Management (DSM is one important tool used to manage energy demands. It employs an advanced power infrastructure along with bi-directional information flow among utilities and users in order to achieve a balanced load curve and minimize demand-supply mismatch. Traditionally, this involves shifting the electricity demand from peak hours to other times of the day in an optimized manner. Multiple users equipped with renewable resources work in coordination with each other in order to achieve mutually beneficial energy management. This, in turn, has generated the concept of cooperative DSM. Such users, called prosumers, consume and produce energy using renewable resources (solar, wind etc.. Prosumers with surplus energy sell to the grid as well as to other consumers. In this paper, a novel Prosumer-based Energy Sharing and Management (PESM scheme for cooperative DSM has been proposed. A simulation model has been developed for testing the proposed method. Different variations of the proposed methodology have been experimented with different criteria. The results show that the proposed energy sharing scheme achieves DSM purposes in a useful manner.

Demand side management scheme in smart grid with cloud computing approach using stochastic dynamic programming

Directory of Open Access Journals (Sweden)

S. Sofana Reka

2016-09-01

Full Text Available This paper proposes a cloud computing framework in smart grid environment by creating small integrated energy hub supporting real time computing for handling huge storage of data. A stochastic programming approach model is developed with cloud computing scheme for effective demand side management (DSM in smart grid. Simulation results are obtained using GUI interface and Gurobi optimizer in Matlab in order to reduce the electricity demand by creating energy networks in a smart hub approach.

Employee retention and integrated disability management practices as demand side factors.

Science.gov (United States)

Habeck, Rochelle; Hunt, Allan; Rachel, Colleen Head; Kregel, John; Chan, Fong

2010-12-01

Demand-side employment research on company policies and practices related to retention and absence and disability management (ADM) can contribute to our understanding of employment issues related to people with disabilities from the employers' perspective. To examine company ADM and retention practices and their effectiveness, as well as how these company policies and practices might influence hiring of people with disabilities. Disability Management Employer Coalition employer members (N = 650) were surveyed by internet and the survey data were analyzed using descriptive statistics, correlation, and multiple regression. Ninety-five participants responded to the survey resulting in a response rate of 14%. Retention practice was found to be associated with retention effectiveness (r = .39, P ideas and involvement of employees, and assuring they know how their work and performance support the mission. ADM practice was related to improving health and managing health conditions (r = .26, P companies.

Using Demand Side Management to Adapt to Water Scarcity and ...

International Development Research Centre (IDRC) Digital Library (Canada)

The Saiss is a sub-basin of the Sebou basin in Northern Morocco. Due to decreased precipitation and increased water demand, the surface waters of the Saiss basin have been greatly reduced. At the current rate of exploitation, the aquifer will be depleted within 25 years. This project will examine whether demand-side ...

Barriers and Opportunities to Broader Adoption of Integrated Demand Side Management at Electric Utilities: A Scoping Study

Energy Technology Data Exchange (ETDEWEB)

Potter, Jennifer [Hawaii Natural Energy Institute, Honolulu, HI (United States); Stuart, Elizabeth [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Energy Analysis and Environmental Impacts Div.; Cappers, P [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Energy Analysis and Environmental Impacts Div.

2018-02-13

Integrated demand-side management (IDSM) is a strategic approach to designing and delivering a portfolio of demand side management (DSM) programs to customers. IDSM typically delivers customer centric strategies with the goal of increasing the amount of DSM in the field, but doing so in a way that integrates various measures and technologies to improve their collective performance and/or penetration. Specifically, IDSM can be defined as the integrated or coordinated delivery of three or more of: (1) energy efficiency (EE), (2) demand response (DR), (3) distributed generation (DG), (4) storage, (5) electric vehicle (EV) technologies, and (6) time-based rate programs to residential and commercial electric utility customers. The electric industry’s limited experience deploying IDSM to date suggests that significant barriers may exist. A Berkeley Lab report “Barriers and Opportunities to Broader Adoption of Integrated Demand Side Management at Electric Utilities: A Scoping Study” explores recent electric utility experience with IDSM to provide an assessment of the barriers and potential benefits perceived or experienced by program administrators in their attempts to implement integrated programs. The research draws on surveys and interviews with eleven staff from a sample of eight DSM program administrators and program implementers who were currently implementing or had previously attempted to implement an IDSM program or initiative. Respondents provided their perspectives on drivers for IDSM and barriers to broader deployment. They also reported on actions they had undertaken to promote expanded delivery of IDSM and provided their assessments of the most important under-tapped opportunities for expanding IDSM efforts, both for program administrator and regulatory organizations.

Feasibility and potential of thermal demand side management in residential buildings considering different developments in the German energy market

International Nuclear Information System (INIS)

Wolisz, Henryk; Punkenburg, Carl; Streblow, Rita; Müller, Dirk

2016-01-01

Highlights: • A scenario analysis for the German energy market in the year 2030 is performed. • Growing demand for flexible electric capacities is identified in all scenarios. • Significant potential for domestic demand side management is identified. • A distinct potential for dynamic operation of domestic supply systems is found. • The necessity for a quick introduction of smart metering and control is found. - Abstract: A transition in the electricity market is required to manage the volatility of increasing renewable energy generation. These fluctuations can be faced with flexible consumption through Demand Side Management (DSM), establishment of further centralized storage capacities and provisioning of dynamic back up generation capacities. At least the latter two options can impose large establishment and operation costs upon the electricity market. Therefore, the feasibility and the resulting potential of coupling the electricity grid with the thermal supply of residential buildings is analysed in this paper. Thereby, inexpensive and widespread thermal storage capacities could be used to improve the integration of dynamic renewable electricity generation. In this paper the technical and economical key impact factors for such thermal DSM approach are elaborated. Based on a literature review, the identified key factors are aggregated to form consistent scenarios of the German “Energiewende” (turnaround in energy policy). The practicability and possible magnitude of the intended DSM is then analysed based on the identified scenarios. All resulting scenarios highlight the growing demand for a flexible electricity market. Especially in scenarios with strong growth of renewable electricity generation, up to 45 GW of flexible electric capacities would be required in Germany by the year 2030. Furthermore, the analysis demonstrates that independently of the energy market development, it is very likely that electricity coupled supply systems will

DSM [demand-side management] financing: Risks and incentives

International Nuclear Information System (INIS)

Dayton, D.S.

1992-01-01

Opportunities to make investments in demand side management (DSM) are widespread, especially among large, complex, energy-intensive customers. Acceptable economics are found for energy efficiency improvements, new construction or renovation, replacement of failing or obsolete equipment, and retrofit of existing facilities with more efficient equipment and operations. Market imperfections and technical limitations intrude on the DSM investment process. These intrusions are examined from a financial viewpoint by considering the return on investment and risks faced by the three potential investors in DSM opportunities: the customer, the utility, and the third party contractor or financier. These risks are illustrated by examining the cash flow of a typical project depicting a comprehensive energy efficiency installation in a medium to large industrial or institutional facility. The spread between the customer's risk/return ratio and that of the other two investors is shown to be surprisingly large. A utility role in marketing and financing, as opposed to direct subsidizing of customers or direct purchase of DSM resources from third parties, is explored as an efficient response to these realities. 2 figs., 3 tabs

Impact on energy requirements and emissions of heat pumps and micro-cogenerators participating in demand side management

International Nuclear Information System (INIS)

Cooper, Samuel J.G.; Hammond, Geoffrey P.; McManus, Marcelle C.; Rogers, John G.

2014-01-01

The potential impacts of participating in demand side management (DSM) on the performance of air source heat pumps (ASHP) and micro-combined heat and power (mCHP) units are considered by this study. As significant consumers and generators of electricity at the distribution level, large numbers of heat pumps and micro-cogenerators would provide considerable scope for participation in DSM systems. However, it is possible that operating regimes which are optimised for grid considerations will not achieve the maximum performance that is possible from the units. Modelling has been conducted to investigate the significance of this effect, considering the case where local distribution constraints are the main driver for demand side interventions. A model of domestic electrical demand has been adapted to consider a neighbourhood of 128 dwellings in order to identify when interventions are necessary. This has been combined with dynamic models of two combustion engine micro-cogenerators, a solid oxide fuel cell micro-cogenerator and two ASHPs. A simple thermal model of each building is combined with a range of user preferences in order to determine the preferred operating profiles of the heating units. The DSM scheme analysed here is likely to have minimal impact on the emissions and energy requirements associated with each heating unit. Its effect is similar to that which occurs without DSM if the control system gain is relaxed such that equivalent thermal comfort is achieved. DSM can reduce the peak electrical demand of the neighbourhood. However, in the scenarios investigated, it is unlikely that the peaks can be reduced sufficiently such that they do not exceed the capacity of the local distribution transformer if ASHPs are used in all dwellings. By using a combination of mCHP units with ASHPs, it is possible to supply heating to all dwellings without exceeding this capacity. In this case, the use of DSM can increase the ratio of ASHPs used. In the context of a low

A Midwest utility's perspective of DSM [demand-side management]: Balancing the needs of customers, shareholders and the environment

International Nuclear Information System (INIS)

Collins, G.F.

1990-01-01

PSI Energy, a predominately coal-burning Indiana electric utility, is very concerned about the environment and is using demand-side management (DSM) as part of a strategy to balance the sometimes conflicting interests of the environment, the economy, customers and shareholders. Faced with slow growth within its service territory, an abundance of low-cost, high sulfur coal burning baseload capacity, massive future expenditures for acid rain mitigation and a weakened financial state due to a cancelled nuclear project, PSI Energy has taken a novel approach to preserving value for customers, shareholders, the economy and environment. To accomodate Indiana's goal of least cost utility planning, PSI initiated an all-source bidding program in which it solicited bids for peaking capacity or the equivalent. Four parallel but separate solicitations were pursued: combustion turbine manufacturers for PSI owned and operated capacity, other utilities and non-utility generators for purchased power and third parties for demand-side management. PSI's philosophy with respect to bidding can be expressed as: simplicity, flexibility, creativity, partnerships, expeditious and fairness. There is a minimum bid of 5 MW of summer peak demand reduction, and the minimum contract length is 10 years. The entire 550 MW capacity block available to be filled in the program is open to demand-side resources. The ten major evaluation criteria involved in the program are: price, sponsor qualifications, operational impact, marketing plan, technology, financing plan, verification and measurement, form of security, project management plan, and project cost estimates

Managing Sustainable Demand-side Infrastructure for Power System Ancillary Services

Science.gov (United States)

Parkinson, Simon Christopher

Widespread access to renewable electricity is seen as a viable method to mitigate carbon emissions, although problematic are the issues associated with the integration of the generation systems within current power system configurations. Wind power plants are the primary large-scale renewable generation technology applied globally, but display considerable short-term supply variability that is difficult to predict. Power systems are currently not designed to operate under these conditions, and results in the need to increase operating reserve in order to guarantee stability. Often, operating conventional generation as reserve is both technically and economically inefficient, which can overshadow positive benefits associated with renewable energy exploitation. The purpose of this thesis is to introduce and assess an alternative method of enhancing power system operations through the control of electric loads. In particular, this thesis focuses on managing highly-distributed sustainable demand-side infrastructure, in the form of heat pumps, electric vehicles, and electrolyzers, as dispatchable short-term energy balancing resources. The main contribution of the thesis is an optimal control strategy capable of simultaneously balancing grid- and demand-side objectives. The viability of the load control strategy is assessed through model-based simulations that explicitly track end-use functionality of responsive devices within a power systems analysis typically implemented to observe the effects of integrated wind energy systems. Results indicate that there is great potential for the proposed method to displace the need for increased reserve capacity in systems considering a high penetration of wind energy, thereby allowing conventional generation to operate more efficiently and avoid the need for possible capacity expansions.

Impacts of Demand-Side Management on Electrical Power Systems: A Review

Directory of Open Access Journals (Sweden)

Hussein Jumma Jabir

2018-04-01

Full Text Available Electricity demand has grown over the past few years and will continue to grow in the future. The increase in electricity demand is mainly due to industrialization and the shift from a conventional to a smart-grid paradigm. The number of microgrids, renewable energy sources, plug-in electric vehicles and energy storage systems have also risen in recent years. As a result, future electricity grids have to be revamped and adapt to increasing load levels. Thus, new complications associated with future electrical power systems and technologies must be considered. Demand-side management (DSM programs offer promising solutions to these issues and can considerably improve the reliability and financial performances of electrical power systems. This paper presents a review of various initiatives, techniques, impacts and recent developments of the DSM of electrical power systems. The potential benefits derived by implementing DSM in electrical power networks are presented. An extensive literature survey on the impacts of DSM on the reliability of electrical power systems is also provided for the first time. The research gaps within the broad field of DSM are also identified to provide directions for future work.

The Demand Side in Economic Models of Energy Markets: The Challenge of Representing Consumer Behavior

Energy Technology Data Exchange (ETDEWEB)

Krysiak, Frank C., E-mail: frank.krysiak@unibas.ch; Weigt, Hannes [Department of Business and Economics, University of Basel, Basel (Switzerland)

2015-05-19

Energy models play an increasing role in the ongoing energy transition processes either as tools for forecasting potential developments or for assessments of policy and market design options. In recent years, these models have increased in scope and scale and provide a reasonable representation of the energy supply side, technological aspects and general macroeconomic interactions. However, the representation of the demand side and consumer behavior has remained rather simplistic. The objective of this paper is twofold. First, we review existing large-scale energy model approaches, namely bottom-up and top-down models, with respect to their demand-side representation. Second, we identify gaps in existing approaches and draft potential pathways to account for a more detailed demand-side and behavior representation in energy modeling.

The Demand Side in Economic Models of Energy Markets: The Challenge of Representing Consumer Behavior

Directory of Open Access Journals (Sweden)

Frank eKrysiak

2015-05-01

Full Text Available Energy models play an increasing role in the ongoing energy transition processes either as tools for forecasting potential developments or for assessments of policy and market design options. In recent years these models have increased in scope and scale and provide a reasonable representation of the energy supply side, technological aspects and general macroeconomic interactions. However, the representation of the demand side and consumer behavior has remained rather simplistic. The objective of this paper is twofold. First, we review existing large scale energy model approaches, namely bottom-up and top-down models, with respect to their demand side representation. Second, we identify gaps in existing approaches and draft potential pathways to account for a more detailed demand side and behavior representation in energy modeling.

The Demand Side in Economic Models of Energy Markets: The Challenge of Representing Consumer Behavior

International Nuclear Information System (INIS)

Krysiak, Frank C.; Weigt, Hannes

2015-01-01

Energy models play an increasing role in the ongoing energy transition processes either as tools for forecasting potential developments or for assessments of policy and market design options. In recent years, these models have increased in scope and scale and provide a reasonable representation of the energy supply side, technological aspects and general macroeconomic interactions. However, the representation of the demand side and consumer behavior has remained rather simplistic. The objective of this paper is twofold. First, we review existing large-scale energy model approaches, namely bottom-up and top-down models, with respect to their demand-side representation. Second, we identify gaps in existing approaches and draft potential pathways to account for a more detailed demand-side and behavior representation in energy modeling.

Cost benefit analysis of the demand side management programs; Analise de custos e beneficios economicos de programas de gerencia pelo lado da demanda

Energy Technology Data Exchange (ETDEWEB)

Schechtman, R; Baum, M [PROMON Engenharia SA, Rio de Janeiro, RJ (Brazil)

1990-12-31

The several cost and benefit components of the demand side management programs for the society groups, including the concessionaire, consumers and society as a whole are studied. The rule evaluations of management programs by demand side, used by North American concessionaire are also discussed. Finally, the numerical examples, that consolidating the concepts and rules evaluation are presented. (C.G.C.). 5 refs, 1 fig, 3 tabs.

Principles concerning the progress of the gas demand side management in Romania

International Nuclear Information System (INIS)

Leca, A.; Statie, E.; Nistoran, D.

1996-01-01

The consequences of the application of demand side management (DSM) and integrated resources planning (IRP) notions for natural gas are analysed. Present socio-economic context in Romania - from a geopolitical point of view - obviously highlights a set of difficult gas supply problems in our country related to: the impossibility of satisfying the consumption demand from internal resources; the necessity of ensuring by imports of an important quantity of gas, which entails an important foreign currency expenditure and possible political pressures which an unique supplier could exert; the requirement of alignment to the western European country legislation, at an institutional and economical practice level. Each of these problems related to the gas-based power production and all together impose the tackling of DSM and IRP requirements from a strategic point of view. Some conclusions and proposals are presented. (author) 1 fig., 4 refs

The Wisconsin experience with incentives for demand-side management

International Nuclear Information System (INIS)

Landgren, D.A.

1990-01-01

It has been noted that, within traditional regulatory frameworks for electric utilities, factors exist which discourage demand side management (DSM) and that there is a lack of positive incentives for DSM. Regulatory agencies should therefore make it possible for DSM measures to benefit from the same treatment as supply-side measures. The Wisconsin Public Service Commission (WPSC) has recognized this need and has adopted various measures accordingly. The need for efficiency incentives is described according to the particular experience of Wisconsin Electric concerning their recourse to a DSM incentive and according to new incentive models being tested in collaboration with other electricity suppliers in Wisconsin. The WPSC has concluded that the fact of considering the costs relating to DSM as expenses or capitalizing them within the rate base does not motivate the utility to promote DSM programs. The WPSC has thus decided to experiment with energy efficiency incentives in order to evaluate their eventual impact. The choice of the type of incentive had an objective of starting the process in an area where the lack of experience has created, from the regulatory point of view, a reticence on the part of utilities to engage in DSM programs. The WPSC has designed a variety of incentive models which have been adapted to each utility's own situation. Specific incentive programs developed for three Wisconsin utilities are reviewed

Market based generation: A promising market management option

International Nuclear Information System (INIS)

Siddiqi, R.

1992-01-01

It is proposed to ease the tension between demand management and supply side management at electric utilities through the introduction of a concept called market management. Market management provides a framework for developing and evaluating the attractiveness of new products and services such as dispersed generation hardware, implementation services, and complementary pricing structures. A market management strategy is the definition of market segments, creating products for those segments, evaluation of the profitability of the product-segment combinations, commitment of resources to those segments, and development of product and marketing plans for those segments. A brief analysis of backup generation is presented as an example of market management. In this example, the customer that is backed up shares some portion of the capital and maintenance costs of the backup unit through priority service rates; the utility and customers that are not backed up can obtain the use of the generating resource but pay only a portion of its costs. Backup generation programs have been found to provide utilities with the ability to meet peak load requirements more cheaply than by investing in peaking capacity. Other benefits for utilities include protection of market share, more efficient rates, and a new source of revenues. With the advances in the technology of small-scale generation, utilities can examine bundling various pricing options with market based generation to offer alternative value-added service options to customer segments with demand characteristics that make these technologies attractive. 3 figs

Energy Refurbishment of an Office Building with Hybrid Photovoltaic System and Demand-Side Management

Directory of Open Access Journals (Sweden)

Giovani Almeida Dávi

2017-08-01

Full Text Available On-site photovoltaic (PV and battery systems intend to improve buildings energy performance, however battery costs and monetary incentives are a major drawback for the introduction of these technologies into the electricity grids. This paper proposes an energy refurbishment of an office building based on multi-objective simulations. An innovative demand-side management approach is analyzed through the PV and battery control with the purpose of reducing grid power peaks and grid imported energy, as well as improving the project economy. Optimization results of load matching and grid interaction parameters, complemented with an economic analysis, are investigated in different scenarios. By means of battery use, the equivalent use of the grid connection is reduced by 12%, enhancing the grid interaction potential, and 10% of load matching rates can be increased. Project improvements indicate the grid connection capacity can be reduced by 13% and significant savings of up to 48% are achieved on yearly bills. The economy demonstrates the grid parity is only achieved for battery costs below 100 €/kWh and the payback period is large: 28 years. In the case with only PV system, the grid parity achieves better outcomes and the payback time is reduced by a half, making this a more attractive option.

Bulk electric system reliability evaluation incorporating wind power and demand side management

Science.gov (United States)

Huang, Dange

correlations and the interactive effects of wind power and load forecast uncertainty on system reliability are examined. The concept of the security cost associated with operating in the marginal state in the well-being framework is incorporated in the economic analyses associated with system expansion planning including wind power and load forecast uncertainty. Overall reliability cost/worth analyses including security cost concepts are applied to select an optimal wind power injection strategy in a bulk electric system. The effects of the various demand side management measures on system reliability are illustrated using the system, load point, and well-being indices, and the reliability index probability distributions. The reliability effects of demand side management procedures in a bulk electric system including wind power and load forecast uncertainty considerations are also investigated. The system reliability effects due to specific demand side management programs are quantified and examined in terms of their reliability benefits.

Economic profitability analysis of demand side management program

International Nuclear Information System (INIS)

Sheen, J.N.

2005-01-01

This study considers both the internal and external costs of the utility in deriving the avoided capacity cost (ACC) and avoided operating cost (AOC) induced in an electric utility caused by the implementation of a demand side management program (DSM). In calculating the ACC, a multiple objective linear programming model is developed. Meanwhile, the AOC is calculated by considering the differences between the total and specific time period energy consumption ratios before and after the implementation of the DSM program. This study also develops an economic analysis method using Net Present Value and Pay Back Year models to assess the economic profitability of implementing a DSM program from a participant's point of view. The design and construction of a partial load leveling eutectic salt Cooling Energy Storage (CES) air conditioning system in a target office building in Kaohsiung, Taiwan, is discussed in order to simulate the cost benefit of the CES system from the perspective of the utility and from that of the participant. The results confirm the effectiveness of the developed models in simulating the economic benefits of implementing a DSM program from the perspectives of both the utility and the participant

Demand-Side Management and European environmental and energy goals. An optimal complementary approach

International Nuclear Information System (INIS)

Bergaentzle, Claire; Clastres, Cedric; Khalfallah, Haikel

2013-12-01

Demand side management (DSM) in electricity markets could improve energy efficiency and achieve environmental targets through controlled consumption. For the past 10 years or so DSM programs have registered significant results. However, detailed analysis of its real impact as observed by a large number of pilot studies suggests that such programs need to be fine-tuned to suit clearly identified conditions. This study aims to provide recommendations for the instruments to be used to prompt demand response with a view to maximizing energy and environmental efficiencies of various countries. The present study suggests that different DSM models should be deployed depending on the specific generation mix in any given country. Beside the natural benefits from cross-borders infrastructures, DSM improves the flexibility and reliability of the energy system, absorbing some shock on generation mix. We show efficiency increases with demand response but at a decreasing rate. So, according to rebound and report effects, simple DSM tools could be preferred. (authors)

Impact of realistic communications for fast-acting demand side management

DEFF Research Database (Denmark)

Dambrauskas, Paulius; Syed, Mazheruddin H.; Blair, Steven M.

2017-01-01

The rising penetration of intermittent energy resources is increasing the need for more diverse electrical energy resources that are able to support ancillary services. Demand side management (DSM) has a significant potential to fulfil this role, but several challenges are still impeding the wide......-scale integration of DSM. One of the major challenges is ensuring the performance of the networks that enable communications between control centres and the end DSM resources. This study presents an analysis of all communications networks that typically participate in the activation of DSM, and provides an estimate...... for the overall latency that these networks incur. The most significant sources of delay from each of the components of the communications network are identified which allows the most critical aspects to be determined. This analysis, therefore, offers a detailed evaluation of the performance of DSM resources...

Primary Control by ON/OFF Demand-Side Devices

DEFF Research Database (Denmark)

Biegel, Benjamin; Hansen, Lars Henrik; Andersen, Palle

2013-01-01

We consider an aggregator managing a portfolio of ON/OFF demand-side devices. The devices are able to shift con- sumption in time within certain energy limitations; moreover, the devices are able to measure the system frequency and switch ON and OFF accordingly. We show how the aggregator can...

Incentive-compatible demand-side management for smart grids based on review strategies

Science.gov (United States)

Xu, Jie; van der Schaar, Mihaela

2015-12-01

Demand-side load management is able to significantly improve the energy efficiency of smart grids. Since the electricity production cost depends on the aggregate energy usage of multiple consumers, an important incentive problem emerges: self-interested consumers want to increase their own utilities by consuming more than the socially optimal amount of energy during peak hours since the increased cost is shared among the entire set of consumers. To incentivize self-interested consumers to take the socially optimal scheduling actions, we design a new class of protocols based on review strategies. These strategies work as follows: first, a review stage takes place in which a statistical test is performed based on the daily prices of the previous billing cycle to determine whether or not the other consumers schedule their electricity loads in a socially optimal way. If the test fails, the consumers trigger a punishment phase in which, for a certain time, they adjust their energy scheduling in such a way that everybody in the consumer set is punished due to an increased price. Using a carefully designed protocol based on such review strategies, consumers then have incentives to take the socially optimal load scheduling to avoid entering this punishment phase. We rigorously characterize the impact of deploying protocols based on review strategies on the system's as well as the users' performance and determine the optimal design (optimal billing cycle, punishment length, etc.) for various smart grid deployment scenarios. Even though this paper considers a simplified smart grid model, our analysis provides important and useful insights for designing incentive-compatible demand-side management schemes based on aggregate energy usage information in a variety of practical scenarios.

Smart grid dispatch strategy for on/off demand-side devices

DEFF Research Database (Denmark)

Biegel, Benjamin; Andersen, Palle; Pedersen, Tom S.

2013-01-01

We consider an aggregator managing a portfolio of runtime and downtime constrained ON/OFF demand-side devices. The devices are able to shift consumption in time within certain energy limitations. We show how the aggregator can manage the portfolio of devices to collectively provide upward...

Managing the side effects of multiple sclerosis therapy: pharmacotherapy options for patients.

Science.gov (United States)

Rommer, Paulus S; Zettl, Uwe K

2018-04-01

Multiple sclerosis (MS) is an immune-mediated and neurodegenerative disease with an unpredictable outcome. Immune-modulatory treatment aims at decreasing long-term disability. With the increasing number of treatment options, it is essential to fully digest the possible side effects of the available therapeutics and to monitor patients is essential. Areas covered: All approved disease-modifying drugs (DMD) for MS are discussed in this review. Mode of action, adverse effects, reported risks for infections and malignancies, and pregnancy related issues are discussed in the review. The authors also provide suggestions for monitoring therapy. For all approved DMDs the pivotal studies have been included for possible side effects, as well as reports by health authorities. For this manuscript, PubMed was checked for reports on side effects for various drugs. Expert opinion: Treatment options in MS are manifold, each carrying different risks. The safety-risk profile for approved agents is favorable. Knowing and monitoring these possible side effects is essential to minimize risks associated with treatment. Presently, the long-term experience for some of these therapies is missing and this must be addressed.

Demand-side management project for Tenaga Nasional Berhad. Energy efficiency guidelines. Progress report No. 3. Volume 1. Final report. Export trade information

Energy Technology Data Exchange (ETDEWEB)

NONE

1993-05-01

This study, conducted by the California Energy Commission, was funded by the U.S. Trade and Development Agency. The report summarizes a demand-side management study performed for the Tenaga Nasional Berhad Headquarters Building. The purpose of the study was to identify and evaluate demand side management measures (DSMs) that would reduce energy costs of the facility. Volume 1 is divided into the following sections: (1.0) Executive Summary; (2.0) Facility Background; (3.0) Ventilating and Air Conditioning Systems Description; (4.0) Lightning System Description; Figures, Tables, and Appendices.

Linking meters and markets: Roles and incentives to support a flexible demand side

DEFF Research Database (Denmark)

Katz, Jonas

2014-01-01

wholesale market participants to the demand side is mostly infeasible, resulting in flexibility tasks being aggregated and delegated to balancing responsible wholesale traders. This analysis focuses on whether current incentives and roles are appropriate and where the design could be improved to establish......Present trends in the development of electricity systems are expected to generate a growing need for flexibility in decentralised resources, including demand response. In order to enable decentralised actors to create value, the organisation of markets and incentives should incorporate these new...... a flexible demand side with a particular focus on the Danish case. Design-related barriers are identified that affect expected value, associated risks, and the distribution of responsibilities. This serves as a basis to define policy options in the context of Nordic electricity markets. © 2014 Elsevier Ltd...

Impact of energy storage in buildings on electricity demand side management

International Nuclear Information System (INIS)

Qureshi, Waqar A.; Nair, Nirmal-Kumar C.; Farid, Mohammad M.

2011-01-01

Research highlights: → Phase change material (PCM) application for space heating has been implemented and assessed for built environment. → Real-Time Pricing (RTP) is assessed as tool to implement Demand Side Management programs effectively. → Two buildings, with and without PCM, have been compared for space heating using RTP in functional electricity market. → PCM found to offer peak load shifting, energy conservation, and reduction in price of electricity. -- Abstract: This paper assesses impact of using phase change materials (PCM) in buildings to leverage its thermal energy storage capability. The emphasis is from an electricity demand side perspective with case studies that incorporates wholesale electricity market data of New Zealand. The results presented in this paper show that for space heating application significant advantages could be obtained using PCM built structures. These positive impacts include peak load shifting, energy conservation and reduction in peak demand for network line companies and potential reduction in electricity consumption and savings for residential customers. This paper uses a testing facility that consists of two identically designed and shaped offices built at Tamaki Campus location of the University of Auckland, New Zealand. The walls and ceilings of one office are finished with ordinary gypsum boards while the interior of the other office is finished with PCM impregnated gypsum boards. Controlled heating facility is provided in both the offices for maintaining temperature within the range of human comfort. This facility is equipped with advanced data acquisition equipment for data monitoring and archiving both locally within the offices and also remotely. Through actual observations and analysis this paper demonstrates two major impacts of DSM. First, the application of phase change material (PCM) in building environment enabling efficient thermal storage to achieve some reduction in the overall electrical energy

Demand side management for remote area power supply systems incorporating solar irradiance model

International Nuclear Information System (INIS)

Al-Alawi, A.; Islam, S.M.

2004-01-01

This paper presents a technique for generating the daily electricity load profile for remote areas in the Middle East from first principles, using diversified demand. The generated load profile includes the energy required to run a small desalination unit to provide the necessary freshwater. Demand side management (DSM) is used in this study to smooth out the daily peaks and fill valleys in the load curve to make the most efficient use of energy resources. Finally, the load profile is compared with real data for six houses collected from Safri area in the Sultanate of Oman. These data may be used as the basis to obtain load profiles of other remote areas of the Middle East since the weather and social factors are similar. The modified hourly variation factor based on weather and economic and social factors of the Middle East is obtained. (author)

Demand-side management project for Tenaga Nasional Berhad. Progress report No. 4. Export trade information

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-03-01

This study, conducted by the California Energy Commission, was funded by the U.S. Trade and Development Agency. Progress Report No. 4 is divided into the following contents: April 6, 1994 Training Mission Delegation Itinerary; April 6, 1994 Training Mission Workshop Information Package; Letter to Chairman of Tenaga Nasional Berhad Requesting Demonstration Project Funding; Design/Build Construction Bid Proposal for Energy Efficient Electric Technology Demontration Project; Final Draft of Demand-Side Management Plan for Tenaga Nasional Berhad; Attachments.

A Virtual Power Plant Architecture for the Demand-Side Management of Smart Prosumers

Directory of Open Access Journals (Sweden)

Marco Pasetti

2018-03-01

Full Text Available In this paper, we present a conceptual study on a Virtual Power Plant (VPP architecture for the optimal management of Distributed Energy Resources (DERs owned by prosumers participating in Demand-Side Management (DSM programs. Compared to classical VPP architectures, which aim to aggregate several DERs dispersed throughout the electrical grid, in the proposed VPP architecture the supervised physical domain is limited to single users, i.e., to single Points of Delivery (PODs of the distribution network. The VPP architecture is based on a service-oriented approach, where multiple agents cooperate to implement the optimal management of the prosumer’s assets, by also considering different forms of Demand Response (DR requests. The considered DR schemes range from Price-Based DRs to Event-Based DRs, covering both the normal operating functions and the emergency control requests applied in modern distribution networks. With respect to centralized approaches, in this study the control perspective is moved from the system level to the single prosumer’s level, who is allowed to independently provide flexible power profiles through the aggregation of multiple DERs. A generalized optimization model, formulated as a Mixed-Integer Linear Programming (MILP problem, is also introduced. Such a model is able to compute the optimal scheduling of a prosumer’s assets by considering both DR requests and end-users’ requirements in terms of comfort levels while minimizing the costs.

Physiological and skill demands of 'on-side' and 'off-side' games.

Science.gov (United States)

Gabbett, Tim J; Jenkins, David G; Abernethy, Bruce

2010-11-01

This study investigated the physiological and skill demands of 'on-side' and 'off-side' games in elite rugby league players. Sixteen male rugby league players participated in 'on-side' and 'off-side' games. Both small-sided games were played in a 40- × 40-m playing area. The 'off-side' game permitted players to have 3 'plays' while in possession of the ball. Players were permitted to pass backward or forward (to an 'off-side' player). The 'on-side' game also permitted players to have 3 'plays' while in possession of the ball. However, players were only permitted to pass backward to players in an 'on-side' position. Heart rate and movement patterns (via global positioning system) were recorded continuously throughout both games. Data were collected on the distance covered, number of high-acceleration and velocity efforts, and recovery between efforts. Video footage was also taken to track the performance of the players. Post hoc inspection of the footage was undertaken to count the number of possessions and the number and quality of disposals. In comparison to 'on-side' games, 'off-side' games had a greater number of involvements ("touches"), passes, and effective passes. However, the cognitive demands of 'on-side' games were greater than 'off-side' games. 'Off-side' games resulted in a greater total distance covered, greater distance covered in mild and moderate accelerations, and greater distance covered in low, moderate, and high-velocity efforts. There were also a greater number of short duration recovery periods between efforts in 'off-side' games. The results of this study demonstrate that 'off-side' games provide greater physiological and skill demands than 'on-side' games. 'Off-side' games may provide a practical alternative to 'on-side' games for the development of skill and fitness in elite rugby league players.

Financial treatment of demand management expenditures at Ontario Hydro

International Nuclear Information System (INIS)

Ariss, D.G.

1990-01-01

Ontario Hydro's demand side management (DSM) plan comprises reduction of load, load shifting, and peak shaving. It includes an accounting policy applied only to measures which reduce demand by the increase in the efficiency of electricity of utilization or by the shifting of load from peak periods to off-peak periods. In order to choose the pertinent periods for which the DSM expenditures should be recovered, the utility has considered three accounting options: expensing all DSM expenditures as incurred; deferring all DSM expenditures; or deferring only those DSM expenditures that meet specified criteria. Ontario Hydro has chosen the last option, since it is in conformity with generally accepted accounting principles. This option is based on the matching principle, under which costs and revenues that are linked to each other in a cause-and-effect relationship should be recognized in the same accounting period. It has also been judged advantageous to amortize the deferred expenses corresponding to each measure over appropriate periods. It has also been established that the amortization period should begin immediately after each measure has been put into operation. This accounting policy ensures that expenses relating to DSM are accounted in a pertinent and uniform manner. 6 refs

DEMONSTRATION OF THE ENVIRONMENTAL AND DEMAND-SIDE MANAGEMENT BENEFITS OF GRID-CONNECTED PHOTOVOLTAIC POWER SYSTEMS SITED ON MILITARY BASES

Science.gov (United States)

The report gives results of an investigation into the pollutant emission reduction and demand-side management potential of three photovoltaic (PV) systems installed at Ft. Huachuca, AZ, Ft. Dix, NJ, and Hickam Air Force Base, HI, which began operation between January and July 199...

2005 resource options report

International Nuclear Information System (INIS)

Morris, T.

2005-01-01

This resource options report (ROR) fulfils regulatory requirements in British Columbia's two-year resource planning process. It identifies a wide range of resources and technologies that could be used to meet BC Hydro's future electricity demand. As such, it facilitates a transparent public review of resource options which include both supply-side and demand-side options. The resource options that will be used in the 2005 integrated electricity plan (IEP) were characterized. This ROR also documents where there is a general agreement or disagreement on the resource type characterization, based on the First Nations and Stakeholder engagement. BC Hydro used current information to provide realistic ranges on volume and cost to characterize environmental and social attributes. The BC Hydro system was modelled to assess the benefit and cost of various resource options. The information resulting from this ROR and IEP will help in making decisions on how to structure competitive acquisition calls and to determine the level of transmission services needed to advance certain BC Hydro projects. The IEP forecasts the nature and quantity of domestic resources required over the next 20 years. A strategic direction on how those needs will be met has been created to guide the management of BC Hydro's energy resources. Supply-side options include near-commercial technologies such as energy storage, ocean waves, tidal, fuel cells and integrated coal gasification combined cycle technology. Supply-side options also include natural gas, coal, biomass, geothermal, wind, and hydro. 120 refs., 39 tabs., 21 figs., 6 appendices

Demand side management for commercial buildings using an in line heat pump water heating methodology

International Nuclear Information System (INIS)

Rankin, Riaan; Rousseau, Pieter G.; Eldik, Martin van

2004-01-01

Most of the sanitary hot water used in South African buildings is heated by means of direct electrical resistance heaters. This is one of the major contributors to the undesirably high morning and afternoon peaks imposed on the national electricity supply grid. For this reason, water heating continues to be of concern to the electricity supplier, ESCOM. Previous studies, conducted by the Potchefstroom University for Christian Higher Education in South Africa, indicated that extensive application of the so called inline heat pump water heating methodology in commercial buildings could result in significant demand side management savings to ESKOM. Furthermore, impressive paybacks can be obtained by building owners who choose to implement the design methodology on existing or new systems. Currently, a few examples exist where the design methodology has been successfully implemented. These installations are monitored with a fully web centric monitoring system that allows 24 h access to data from each installation. Based on these preliminary results, a total peak demand reduction of 108 MW can be achieved, which represents 18% of the peak load reduction target set by ESKOM until the year 2015. This represents an avoided cost of approximately MR324 (ZAR) [Int J Energy Res 25(4) (1999) 2000]. Results based on actual data from the monitored installations shows a significant peak demand reduction for each installation. In one installation, a hotel with an occupancy of 220 people, the peak demand contribution of the hot water installation was reduced by 86%, realizing a 36% reduction in peak demand for the whole building. The savings incurred by the building owner also included significant energy consumption savings due to the superior energy efficiency of the heat pump water heater. The combined savings result in a conservatively calculated straight payback period of 12.5 months, with an internal rate of return of 98%. The actual cost of water heating is studied by

Towards demand-side solutions for mitigating climate change

Science.gov (United States)

Creutzig, Felix; Roy, Joyashree; Lamb, William F.; Azevedo, Inês M. L.; Bruine de Bruin, Wändi; Dalkmann, Holger; Edelenbosch, Oreane Y.; Geels, Frank W.; Grubler, Arnulf; Hepburn, Cameron; Hertwich, Edgar G.; Khosla, Radhika; Mattauch, Linus; Minx, Jan C.; Ramakrishnan, Anjali; Rao, Narasimha D.; Steinberger, Julia K.; Tavoni, Massimo; Ürge-Vorsatz, Diana; Weber, Elke U.

2018-04-01

Research on climate change mitigation tends to focus on supply-side technology solutions. A better understanding of demand-side solutions is missing. We propose a transdisciplinary approach to identify demand-side climate solutions, investigate their mitigation potential, detail policy measures and assess their implications for well-being.

Communications technologies for demand side management, DSM, and European utility communications architecture, EurUCA

Energy Technology Data Exchange (ETDEWEB)

Uuspaeae, P. [VTT Energy, Espoo (Finland)

1996-12-31

The scope of this research is data communications for electric utilities. Demand Side Management (DSM) calls for communication between the Electric Utility and the Customer. The communication capacity needed will depend on the functions that are chosen for DSM, and on the number of customers. Some functions may be handled with one-way communications, some functions require two-way communication. Utility Communication Architecture looks for an overall view of the communications needs and communication systems in an electric utility. The objective is to define and specify suitable and compatible communications procedures within the Utility and also to outside parties. (27 refs.)

Communications technologies for demand side management, DSM, and European utility communications architecture, EurUCA

Energy Technology Data Exchange (ETDEWEB)

Uuspaeae, P [VTT Energy, Espoo (Finland)

1997-12-31

The scope of this research is data communications for electric utilities. Demand Side Management (DSM) calls for communication between the Electric Utility and the Customer. The communication capacity needed will depend on the functions that are chosen for DSM, and on the number of customers. Some functions may be handled with one-way communications, some functions require two-way communication. Utility Communication Architecture looks for an overall view of the communications needs and communication systems in an electric utility. The objective is to define and specify suitable and compatible communications procedures within the Utility and also to outside parties. (27 refs.)

Comparing Demand Side Management approaches

NARCIS (Netherlands)

Molderink, Albert; Bakker, Vincent; Hurink, Johann L.; Smit, Gerardus Johannes Maria

2012-01-01

Due to increasing energy prices and the greenhouse effect, a more efficient energy supply is desirable, preferably based on renewable sources. To cope with the decrease of flexibility due to the introduction of renewables in production side of the supply chain, a more flexible consumer side is

Effects of utility demand-side management programs on uncertainty

International Nuclear Information System (INIS)

Hirst, E.

1994-01-01

Electric utilities face a variety of uncertainties that complicate their long-term resource planning. These uncertainties include future economic and load growths, fuel prices, environmental and economic regulations, performance of existing power plants, cost and availability of purchased power, and the costs and performance of new demand and supply resources. As utilities increasingly turn to demand-side management (DSM) programs to provide resources, it becomes more important to analyze the interactions between these programs and the uncertainties facing utilities. This paper uses a dynamic planning model to quantify the uncertainty effects of supply-only vs DSM + supply resource portfolios. The analysis considers four sets of uncertainties: economic growth, fuel prices, the costs to build new power plants, and the costs to operate DSM programs. The two types of portfolios are tested against these four sets of uncertainties for the period 1990 to 2010. Sensitivity, scenario, and worst-case analysis methods are used. The sensitivity analyses show that the DSM + supply resource portfolio is less sensitive to unanticipated changes in economic growth, fuel prices, and power-plant construction costs than is the supply-only portfolio. The supply-only resource mix is better only with respect to uncertainties about the costs of DSM programs. The base-case analysis shows that including DSM programs in the utility's resource portfolio reduces the net present value of revenue requirements (NPV-RR) by 490 million dollars. The scenario-analysis results show an additional 30 million dollars (6%) in benefits associated with reduction in these uncertainties. In the worst-case analysis, the DSM + supply portfolio again reduces the cost penalty associated with guessing wrong for both cases, when the utility plans for high needs and learns it has low needs and vice versa. 20 refs

Developing a demand side management strategic framework through a collaborative [process

International Nuclear Information System (INIS)

Kostler, J.

1992-01-01

Alberta Power Ltd. is developing a demand side management (DSM) strategic framework through a collaborative process that began in September 1991. The process is seen to have the advantages of involving customers in DSM issues, giving them the opportunity to determine the outcome, being less confrontational, and having the capability of arriving at solutions unattainable through other processes. Issues being considered in the collaborative process include cost effectiveness, externalities, screening and analyzing of DSM measures, cost allocation and recovery, DSM lost revenues, the utility role in DSM, measurement criteria, and incentives. The process includes day-long meetings of a 12-member collaborative group comprising representatives from Alberta Power, government agencies, industry and municipal associations, and environmental and consumer organizations. A professional facilitator and an expert consultant from outside Alberta Power were employed to support the collaborative process. The process is working well and is on track to present the utility with a strategic framework to deal with DSM

General equilibrium effects of a supply side GHG mitigation option under the Clean Development Mechanism.

Science.gov (United States)

Timilsina, Govinda R; Shrestha, Ram M

2006-09-01

The Clean Development Mechanism (CDM) under the Kyoto Protocol to the United Nations Framework Convention on Climate Change is considered a key instrument to encourage developing countries' participation in the mitigation of global climate change. Reduction of greenhouse gas (GHG) emissions through the energy supply and demand side activities are the main options to be implemented under the CDM. This paper analyses the general equilibrium effects of a supply side GHG mitigation option-the substitution of thermal power with hydropower--in Thailand under the CDM. A static multi-sector general equilibrium model has been developed for the purpose of this study. The key finding of the study is that the substitution of electricity generation from thermal power plants with that from hydropower plants would increase economic welfare in Thailand. The supply side option would, however, adversely affect the gross domestic product (GDP) and the trade balance. The percentage changes in economic welfare, GDP and trade balance increase with the level of substitution and the price of certified emission reduction (CER) units.

Why strategic pricing is the most powerful DSM [demand-side management] tool

International Nuclear Information System (INIS)

LeBlanc, W.

1990-01-01

Strategic pricing has long been under-utilized as a strategic tool by the electric utility industry. Ways by which utility, customer and regulatory interests can and should overlap with reference to strategic planning, and how the electric industry could enhance its ability to continue providing premier energy services to its customers and society are examined. Strategic pricing in the airline, banking, automobile and telephone industries are examined and compared. Strategic pricing can help utilities segment markets to improve service value, define products, create customer incentives to purchase/consume desirable goods and services, and signal competitors. Each of these benefits is illustrated with an example that closely integrates strategic pricing with demand-side management. Pricing strategically takes many steps, but can be broken down into: meet common challenges of business and marketing objectives; gain regulatory acceptance; and energize the organization to accept, adopt and implement strategic pricing

An Overview of Demand Side Management Control Schemes for Buildings in Smart Grids

DEFF Research Database (Denmark)

Kosek, Anna Magdalena; Costanzo, Giuseppe Tommaso; Bindner, Henrik W.

2013-01-01

The increasing share of distributed energy resources and renewable energy in power systems results in a highly variable and less controllable energy production. Therefore, in order to ensure stability and to reduce the infrastructure and operation cost of the power grid, flexible and controllable...... of the power sector in mind and thus can differ significantly in their architecture, their integration into the various markets, their integration into distribution network operation and several other aspects. This paper proposes a classification of load control policies for demand side management in smart...... buildings, based on external behavior: direct, indirect, transactional and autonomous control; internal operation: decision support system scope, control strategy, failure handling and architecture. This classification assists in providing an overview of the control schemes as well as different ways...

Demand-side management (DSM) in the context of China's on-going power sector reform

International Nuclear Information System (INIS)

Zhang, Sufang; Jiao, Yiqian; Chen, Wenjun

2017-01-01

As an approach to manage power demand-side resources, DSM plays an important role in electric power system. Though DSM was introduced into China in the early 1990s, its benefits have been underutilized. Using literature study, interview methods and three data sources, this paper examines the likely impacts of China's on-going power sector reform on its DSM. It finds that the major constraints to DSM in China are the insufficient and improper market-based DSM mechanism, grid companies’ low motivations for DSM due to their traditional business model, the underdeveloped energy service industry, and electricity end-users’ low motivation for DSM. China's on-going power sector reform will change power transmission and distribution pricing and grid companies’ business model and introduce competition into retail-side. Drawing on these findings, it is concluded that the likely impacts of the new reform on DSM are: governments may attach more importance to DSM; grid companies may have more motivations for DSM investment; electricity end-users’ motivations for DSM may be both enhanced and dampened; electricity retailers’ motivations for DSM may be dampened; demand response application may be enhanced, and more DSM business models may be developed. Finally, policy implications are provided. - Highlights: • Mechanism of and constraints to DSM in China are examined. • China’s on-going power sector reform is overviewed. • DSM is likely to be enhanced under China's on-going power sector reform. • Policy implications are provided.

Proceedings of the CEATI demand side management workshop on understanding customer response. CD-ROM ed.

International Nuclear Information System (INIS)

2006-01-01

Demand for electricity continues to increase in the midst of environmental concerns, deregulation and the rapid evolution of technology. In order to succeed in a changing environment, utilities must be both adaptive and innovative. Growing concerns over supply and the environmental effects of rising consumption rates have led many utilities to establish demand side management (DSM) programs. However, some utilities have failed to consider the importance of customer behaviour in the success of DSM programs. This conference examined various successful initiatives to encourage customers to reduce their individual or corporate demands for energy. The influence of branding, technology, information prices signals and various other strategies were explored. Issues concerning energy efficiency and customer feedback were discussed. The effect of alternative pricing regimes on DSM programs was investigated. Various information system tools were also examined, and the value of real time electricity monitoring was evaluated. Various DSM initiatives in North America were used to establish benchmarks for the successful implementation of DSM strategies. The conference was divided into 3 sessions: (1) involving the customer in reducing demand; (2) the success of energy efficiency and demand response programs : the impact of branding and the impact of price signals; and (3) the technologies and innovations needed to make it work. The conference featured 13 presentations, of which 8 have been catalogued separately for inclusion in this database. refs., tabs., figs

Proceedings of the CEATI demand side management workshop on understanding customer response. CD-ROM ed.

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-07-01

Demand for electricity continues to increase in the midst of environmental concerns, deregulation and the rapid evolution of technology. In order to succeed in a changing environment, utilities must be both adaptive and innovative. Growing concerns over supply and the environmental effects of rising consumption rates have led many utilities to establish demand side management (DSM) programs. However, some utilities have failed to consider the importance of customer behaviour in the success of DSM programs. This conference examined various successful initiatives to encourage customers to reduce their individual or corporate demands for energy. The influence of branding, technology, information prices signals and various other strategies were explored. Issues concerning energy efficiency and customer feedback were discussed. The effect of alternative pricing regimes on DSM programs was investigated. Various information system tools were also examined, and the value of real time electricity monitoring was evaluated. Various DSM initiatives in North America were used to establish benchmarks for the successful implementation of DSM strategies. The conference was divided into 3 sessions: (1) involving the customer in reducing demand; (2) the success of energy efficiency and demand response programs : the impact of branding and the impact of price signals; and (3) the technologies and innovations needed to make it work. The conference featured 13 presentations, of which 8 have been catalogued separately for inclusion in this database. refs., tabs., figs.

Hawaii demand-side management resource assessment. Final report, Reference Volume 1: Building prototype analysis

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-04-01

This report provides a detailed description of, and the baseline assumptions and simulation results for, the building prototype simulations conducted for the building types designated in the Work Plan for Demand-side Management Assessment of Hawaii`s Demand-Side Resources (HES-4, Phase 2). This report represents the second revision to the initial building prototype description report provided to DBEDT early in the project. Modifications and revisions to the prototypes, based on further calibration efforts and on comments received from DBEDT Staff have been incorporated into this final version. These baseline prototypes form the basis upon which the DSM measure impact estimates and the DSM measure data base were developed for this project. This report presents detailed information for each of the 17 different building prototypes developed for use with the DOE-21E program (23 buildings in total, including resorts and hotels defined separately for each island) to estimate the impact of the building technologies and measures included in this project. The remainder of this section presents some nomenclature and terminology utilized in the reports, tables, and data bases developed from this project to denote building type and vintage. Section 2 contains a more detailed discussion of the data sources, the definition of the residential sector building prototypes, and results of the DOE-2 analysis. Section 3 provides a similar discussion for the commercial sector. The prototype and baseline simulation results are presented in a separate section for each building type. Where possible, comparison of the baseline simulation results with benchmark data from the ENERGY 2020 model or other demand forecasting models specific to Hawaii is included for each building. Appendix A contains a detailed listing of the commercial sector baseline indoor lighting technologies included in the existing and new prototypes by building type.

Demand-Side Flexibility for Energy Transitions: Ensuring the Competitive Development of Demand Response Options

OpenAIRE

Nursimulu, Anjali; Florin, Marie-Valentine; Vuille, François

2015-01-01

This report provides an overview of the current debates about demand response development, focusing primarily on Europe, with some comparisons to the United States. ‘Demand response’ includes strategies that involve end-use customers adapting or altering their electricity demand in response to grid conditions or market prices. It is viewed as a multi-purpose power-system resource that enhances the energy system’s capacity to cope with increasing demand, rising costs of conventional transmissi...

Electricity deregulation, spot price patterns and demand-side management

International Nuclear Information System (INIS)

Li, Y.; Flynn, P.C.

2006-01-01

This paper examines extensive hourly or half-hourly power price data from 14 deregulated power markets. It analyzes average diurnal patterns, relationship to system load, volatility, and consistency over time. Diurnal patterns indicate the average price spread between off-peak and on-peak and weekend vs. weekday power consumption. Volatility is measured by price velocity: the average normalized hourly change in power price, calculated daily. The calculated price velocity is broken down into an expected component that arises from the diurnal pattern and an unexpected component that arises from unknown factors. The analysis reveals significant differences among markets, suggesting that demand-side management (DSM) of power consumption is far more difficult in some markets than in others. At one extreme, Spain, Britain and Scandinavia show consistent diurnal price patterns, a stable relationship between price and system load, and a low unexplained component of price volatility. A power consumer in these markets could form a reasonable expectation of a reward for DSM of elective power consumption. At the other extreme, two markets in Australia show erratic diurnal price patterns from year to year, low correlation between price and system load, and a high amount of unexpected price velocity. A power consumer in these markets would have far greater difficulty in realizing a benefit from DSM. Markets that experienced one period of very high prices without a clear external cause, such as California and Alberta, appear to have a significant longer-term erosion of public support for deregulation. (author)

Demand-side management project for Tenaga Nasional Berhad. Progress report No. 3. Volume 2. Export trade information

Energy Technology Data Exchange (ETDEWEB)

NONE

1993-09-01

The objective of this work is identify and encompass those utility demand-side management (DSM) activities that influence customer electricity use to produce customer savings while favorably modifying the utility load. These activities can help utilities operate more efficiently and effectively in uncertain and competitive business environments. This work authorization will initiate the following: Provide descriptive information on the operating characteristics, applicability, specifications, costs, and benefits of DSM/end-use technologies; Characterize the marketing methods used to encourage customer acceptance of these technologies.

An Improved Fuzzy C-Means Algorithm for the Implementation of Demand Side Management Measures

Directory of Open Access Journals (Sweden)

Ioannis Panapakidis

2017-09-01

Full Text Available Load profiling refers to a procedure that leads to the formulation of daily load curves and consumer classes regarding the similarity of the curve shapes. This procedure incorporates a set of unsupervised machine learning algorithms. While many crisp clustering algorithms have been proposed for grouping load curves into clusters, only one soft clustering algorithm is utilized for the aforementioned purpose, namely the Fuzzy C-Means (FCM algorithm. Since the benefits of soft clustering are demonstrated in a variety of applications, the potential of introducing a novel modification of the FCM in the electricity consumer clustering process is examined. Additionally, this paper proposes a novel Demand Side Management (DSM strategy for load management of consumers that are eligible for the implementation of Real-Time Pricing (RTP schemes. The DSM strategy is formulated as a constrained optimization problem that can be easily solved and therefore, making it a useful tool for retailers’ decision-making framework in competitive electricity markets.

Distributed demand-side management optimisation for multi-residential users with energy production and storage strategies

Directory of Open Access Journals (Sweden)

Emmanuel Chifuel Manasseh

2014-12-01

Full Text Available This study considers load control in a multi-residential setup where energy scheduler (ES devices installed in smart meters are employed for demand-side management (DSM. Several residential end-users share the same energy source and each residential user has non-adjustable loads and adjustable loads. In addition, residential users may have storage devices and renewable energy sources such as wind turbines or solar as well as dispatchable generators. The ES devices exchange information automatically by executing an iterative distributed algorithm to locate the optimal energy schedule for each end-user. This will reduce the total energy cost and the peak-to-average ratio (PAR in energy demand in the electric power distribution. Users possessing storage devices and dispatchable generators strategically utilise their resources to minimise the total energy cost together with the PAR. Simulation results are provided to evaluate the performance of the proposed game theoretic-based distributed DSM technique.

Analysis of Cool Roof Coatings for Residential Demand Side Management in Tropical Australia

Directory of Open Access Journals (Sweden)

Wendy Miller

2015-06-01

Full Text Available Cool roof coatings have a beneficial impact on reducing the heat load of a range of building types, resulting in reduced cooling energy loads. This study seeks to understand the extent to which cool roof coatings could be used as a residential demand side management (DSM strategy for retrofitting existing housing in a constrained network area in tropical Australia where peak electrical demand is heavily influenced by residential cooling loads. In particular this study seeks to determine whether simulation software used for building regulation purposes can provide networks with the ‘impact certainty’ required by their DSM principles. The building simulation method is supported by a field experiment. Both numerical and experimental data confirm reductions in total consumption (kWh and energy demand (kW. The nature of the regulated simulation software, combined with the diverse nature of residential buildings and their patterns of occupancy, however, mean that simulated results cannot be extrapolated to quantify benefits to a broader distribution network. The study suggests that building data gained from regulatory simulations could be a useful guide for potential impacts of widespread application of cool roof coatings in this region. The practical realization of these positive impacts, however, would require changes to the current business model for the evaluation of DSM strategies. The study provides seven key recommendations that encourage distribution networks to think beyond their infrastructure boundaries, recognising that the broader energy system also includes buildings, appliances and people.

Design of demand side response model in energy internet demonstration park

Science.gov (United States)

Zhang, Q.; Liu, D. N.

2017-08-01

The implementation of demand side response can bring a lot of benefits to the power system, users and society, but there are still many problems in the actual operation. Firstly, this paper analyses the current situation and problems of demand side response. On this basis, this paper analyses the advantages of implementing demand side response in the energy Internet demonstration park. Finally, the paper designs three kinds of feasible demand side response modes in the energy Internet demonstration park.

Demand Side Management in an Integrated Electricity Market: What are the Impacts on Generation and Environmental Concerns?

International Nuclear Information System (INIS)

Bergaentzle, Claire; Clastres, Cedric

2013-05-01

Smart Grid technology appears necessary to succeed in activating the demand through demand side management (DSM) programs. This would in turn improve energy efficiency and achieve environmental targets through controlled consumption. The many pilot projects led worldwide involving smart grids technology, brought quantitative evaluations of DSM measures on electricity load. Efficient DSM instruments must be fine-tuned to respond to very specific issues arising from the generation mix, the integration of intermittent energies or the level of outage risks faced during peak period. Efficient DSM strategies are illustrated through a model involving five countries that carry these different features and under the assumptions of isolated and fully interconnected markets. This paper aims at bringing recommendations regarding the instruments that should be implemented to maximize the benefits of smart grids technology and demand response. Finally, it tends to emphasis the issue of homogenized energy efficiency policies, critical in the building of internal energy markets such as the one the European Union is envisioning. (authors)

Why commercial customers are SIC of DSM [demand-side management] marketing

International Nuclear Information System (INIS)

Lewis, L.E.

1990-01-01

Studies have shown that the success of demand management programs, which have demonstrated economic benefits, depends on the level of customer participation. In order to have a better understanding of the decisionmaking process of commercial customers with respect to demand management programs, a study was undertaken to determine the preferences and the behavior of this class of clientele. This clientele, whose power consumption has been increasing at a faster rate than that of other sectors, represents a vast range of enterprises producing and supplying all kinds of products. Many of them operate from numerous geographic points on local, regional, national, and even world scales and are generally hierarchically organized. Because of these characteristics, their decisionmaking processes and their needs are equally complex, more so than in the residential sector. A multidimensional approach has been adopted to ensure that their needs are determined according to a quantitative and qualitative research method. The conclusions of the quantitative research have demonstrated that the frameworks representing different organizations respond differently to questions on their needs. It is also noted that certain commercial enterprises are of a cohesive nature (i.e. there is a consistency in understanding of corporate strategic and operational requirements at all hierarchical levels), while others are more diffuse. Those responsible for marketing demand management programs therefore must improve their understanding of the strategic and operational needs of their commercial customers in order to make their demand management programs productive in the view of the appropriate personnel at the hierarchical level applicable to the company concerned

Power System Transient Stability Improvement Using Demand Side Management in Competitive Electricity Markets

DEFF Research Database (Denmark)

Hu, Weihao; Wang, Chunqi; Chen, Zhe

2012-01-01

Since the hourly spot market price is available one day ahead in Denmark, the price could be transferred to the consumers and they may shift some of their loads from high price periods to the low price periods in order to save their energy costs. The optimal load response to an electricity price...... for demand side management generates different load profiles and may provide an opportunity to improve the transient stability of power systems with high wind power penetrations. In this paper, the idea of the power system transient stability improvement by using optimal load response to the electricity...... price is proposed. A 102-bus power system which represents a simplified model of the western Danish power system is chosen as the study case. Simulation results show that the optimal load response to electricity prices is an effective measure to improve the power system transient stability with high...

Electric power market liberalization and demand-side management (DSM); Denryoku shijo jiyuka to DSM

Energy Technology Data Exchange (ETDEWEB)

Yajima, M. [Central Research Institute of Electric Power Industry, Tokyo (Japan)

1997-01-30

This paper explains effects of market liberalization which will lead to introducing competition in electric power business on demand-side management (DSM), by quoting examples mainly in the United States. The paper also describes the future outlook thereon. The DSM program in the United States has expanded for the period between 1989 through 1994. However, during the last few years, the movements of electric power market liberalization have come to force electric power business entities to change their management strategies and reduction in expense. This situation has resulted in reduction in the DSM budget. Future DSM programs are thought to diversify into the following types: a program such as load management which has effect of reducing expenses and investments in investment time periods of 5 to 10 years, a program effective for users such as high-efficiency motors which have effects of reducing expenses and improving efficiency in investment time periods of 3 to 5 years, a program which will be effective enough if market barriers are removed after the market conversions, but requires subsidies and purchase guarantees, and a social program intended for environmental effects and low-income users. 4 refs., 1 tab.

Transactive Demand Side Management Programs in Smart Grids with High Penetration of EVs

Directory of Open Access Journals (Sweden)

Poria Hasanpor Divshali

2017-10-01

Full Text Available Due to environmental concerns, economic issues, and emerging new loads, such as electrical vehicles (EVs, the importance of demand side management (DSM programs has increased in recent years. DSM programs using a dynamic real-time pricing (RTP method can help to adaptively control the electricity consumption. However, the existing RTP methods, particularly when they consider the EVs and the power system constraints, have many limitations, such as computational complexity and the need for centralized control. Therefore, a new transactive DSM program is proposed in this paper using an imperfect competition model with high EV penetration levels. In particular, a heuristic two-stage iterative method, considering the influence of decisions made independently by customers to minimize their own costs, is developed to find the market equilibrium quickly in a distributed manner. Simulations in the IEEE 37-bus system with 1141 customers and 670 EVs are performed to demonstrate the effectiveness of the proposed method. The results show that the proposed method can better manage the EVs and elastic appliances than the existing methods in terms of power constraints and cost. Also, the proposed method can solve the optimization problem quick enough to run in real-time.

An Integrated Decentralized Energy Planning Model considering Demand-Side Management and Environmental Measures

Directory of Open Access Journals (Sweden)

Seyed Mahmood Kazemi

2013-01-01

Full Text Available Decentralized energy planning (DEP is looked upon as an indisputable opportunity for energy planning of villages, isolated islands, and far spots. Nonetheless, at this decentralized planning level, the value of demand-side resources is not fairly examined, despite enjoying great advantages. Therefore, the core task of this study is to integrate demand-side resources, as a competing solution against supply-side alternatives, with decentralized energy planning decisions and demonstrate the rewarding role it plays. Moreover, sustainability indicators (SIs are incorporated into DEP attempts in order to attain sustainable development. It is emphasized that unless these indicators are considered at lower energy planning levels, they will be ignored at higher planning levels as well. Hence, to the best knowledge of the authors, this study for the first time takes into account greenhouse gas (GHG emissions produced by utilization of renewable energies in DEP optimization models. To address the issues mentioned previously, multiobjective linear programming model along with a min-max goal programming approach is employed. Finally, using data taken from the literature, the model is solved, and the obtained results are discussed. The results show that DSM policies have remarkably contributed to significant improvements especially in terms of environmental indicators.

Preliminary guidelines for electricity distributor conservation and demand management activities : a guide for conservation and demand management investment

International Nuclear Information System (INIS)

2004-01-01

In May 2004, electricity distributors in Ontario were asked to submit deferral accounts to the Ontario Energy Board to track expenditures on conservation and demand management initiatives. The deferral accounts must be established before the distributor could recover the costs through the next installment of the allowable return on equity in March 2004. The Board will determine the appropriateness of the actual expenditures. These guidelines offer short-term assistance to distributors in establishing conservation and demand management plans and initiatives. The following specific measures may be supported by the Board: energy efficiency; operational changes to smart control systems; load management measures which facilitate interruptible and dispatchable loads, dual fuel applications, thermal storage and demand response; fuel switching measures; programs targeted to low income and hard to reach consumers; and, distributed energy options such as tri-generation, cogeneration, ground source heat pumps, wind and biomass systems. These guidelines described the regulatory treatment of conservation and demand management investments along with cost effectiveness, allocation of costs, monitoring, evaluation, and implementation. 1 appendix

Potential of Demand Side Management to Reduce Carbon Dioxide Emissions Associated with the Operation of Heat Pumps

Directory of Open Access Journals (Sweden)

Samuel J. G. Cooper

2013-06-01

Full Text Available This work considers the potential reduction in the carbon dioxide emissions associated with the operation of Air Source Heat Pump which could be achieved by using demand side management. In order to achieve significant reductions in carbon dioxide emissions, it is widely envisioned that electrification of the heating sector will need to be combined with decarbonisation of the electrical supply. By influencing the times at when electric heat pumps operate such that they coincide more with electricity generation which has a low marginal carbon emissions factor, it has been suggested that these emissions could be reduced further. In order to investigate this possibility, models of the UK electrical grid based on scenarios for 2020 to 2050 have been combined with a dynamic model of an air source heat pump unit and thermal models of a population of dwellings. The performance and carbon dioxide emissions associated with the heat pumps are compared both with and without demand side management interventions intended to give preference to operation when the marginal emissions factor of the electricity being generated is low. It is found that these interventions are unlikely to be effective at achieving further reductions in emissions. A reduction of around 3% was observed in scenarios based around 2035 but in other scenarios the reduction was insignificant. In the scenarios with high wind generation (2050, the DSM scheme considered here tends to improve thermal comfort (with minimal increases in emissions rather than achieving a decrease in emissions. The reasons for this are discussed and further recommendations are made.

Multicriteria evaluation of demand side management (DSM) implementation strategies in the Indian power sector

Energy Technology Data Exchange (ETDEWEB)

Vashishtha, Sanjay [Centre for Renewable Energy and Environmental Development (CREED), BITS, Pilani, Rajasthan 333031 (India); Ramachandran, M. [BITS Pilani Dubai Centre, Dubai (United Arab Emirates)

2006-09-15

In recent years, demand side management (DSM) has emerged as an efficient utility planning strategy for reducing capacity shortages and improving system load factors. The Indian government is adopting various policies to implement DSM programs. DSM implementation involves a variety of interests with conflicting objectives, and a range of possible implementation strategies with varying implications for effectiveness, cost, feasibility, efficiency and stakeholder acceptance. This necessitates a critical comparison of the strategies to determine a preferred strategy or combination of strategies from each specific stakeholder's point of view. The present study evaluates DSM implementation strategies from a multiobjective perspective using the Analytic Hierarchy Process (AHP). Eight strategies and six criteria were considered. Forty utility, regulator, and consumer stakeholders were surveyed. The most highly ranked strategies involved creating dedicated funds and providing technical support to end users for effective implementation of DSM. (author)

Smart grids and power systems efficiency: regulatory tools and demand-side management impacts

International Nuclear Information System (INIS)

Bergaentzle, Claire

2015-01-01

The physical architecture of electricity grids and the organizational structure of power systems implemented after the reforms have traditionally be achieved according to the characteristics of the transmission infrastructures and power mixes. However, the new challenges related to energy transition favor a greater participation of decentralized generation and final consumers to system exploitation and competitive markets. This latter participation is made possible thanks to recent innovations in the fields of communication and remote control technologies. Significant evolutions are expected in power industries that share common characteristics. First, these evolutions suppose massive capital investments to modernize and adapt current power distribution grids. Second, it is expected the activation of distribution grids and final consumers will unleash substantial unexploited economic efficiency gains as well as impose new constraints. Taking these simple facts as a starting point, the objective of the thesis is twofold. In the first place, we provide a theoretical analysis of the regulatory instruments that monitor the system operators' expenses. Relying on the literature, we aim at characterizing what regulatory tools and incitation are suitable for investing in smart grids technologies. Since it is necessary to compare theoretical formulation to facts, we use an empirical approach that allows us to designate key benefits pursued by the development of smart grids and to compare our theoretical results with practical regulatory applications. Our findings eventually allow us to formulate recommendations. In the second place, the thesis focuses on the impacts of demand-side management during peak periods. We structure our approach around two general observations. Large benefits should be generated in lowering substantially peak demand. However, such situation also creates losses of profit for generators. We provide an estimation of efficiency gains and revenue losses

Demand side management at Enbridge and best practices in Canada

Energy Technology Data Exchange (ETDEWEB)

Hunt, K.; Griffin, B. [Enbridge Gas Distribution, Toronto, ON (Canada)

2004-07-01

In 1994, the Ontario Energy Board required that gas utilities implement DSM programs for all customers. Enbridge began delivering demand side management (DSM) programs in 1995. DSM is now fully integrated with marketing. DSM programs are delivered across the residential, commercial, industrial, and multi-residential sectors. In 1997, Enbridge introduced the Steam Saver Program for customers who own mid-sized and large steam boilers. The program is now saving customers over 41 million cubic metres of gas per year, representing over $10 million annually. Steam boiler plants burn 30 per cent of all fuel in Ontario. They include natural gas, oil, wood or coal. This paper included a table listing the annual fuel consumption and cost for 1,200 boiler plants in Ontario. The Steam Saver Program identified steam efficiency projects in the customer's plant, provided a business case for the customer and provided technical and financial help to implement the project. The average financial payback on steam efficiency projects is 1.7 years. This paper also described Enbridge's Natural Gas Construction Heater Program for new residential construction markets. The program promotes the benefits of natural gas construction heaters as an alternative to propane salamanders for curing concrete walls in basements, drywall drying, and thawing soil for basement floors before pouring concrete. The natural gas construction heaters are also more suitable for heating the home before a central furnace system is activated. 3 tabs., 6 figs.

Implementation of a demand elasticity model in the building energy management system

NARCIS (Netherlands)

Ożadowicz, A.; Grela, J.; Babar, M.

2016-01-01

Nowadays, crucial part of modern Building Automation and Control Systems (BACS) is electric energy management. An active demand side management is very important feature of a Building Energy Management Systems (BEMS) integrated within the BACS. Since demand value changes in time and depends on

Designing Pareto-superior demand-response rate options

International Nuclear Information System (INIS)

Horowitz, I.; Woo, C.K.

2006-01-01

We explore three voluntary service options-real-time pricing, time-of-use pricing, and curtailable/interruptible service-that a local distribution company might offer its customers in order to encourage them to alter their electricity usage in response to changes in the electricity-spot-market price. These options are simple and practical, and make minimal information demands. We show that each of the options is Pareto-superior ex ante, in that it benefits both the participants and the company offering it, while not affecting the non-participants. The options are shown to be Pareto-superior ex post as well, except under certain exceptional circumstances. (author)

Research on electricity market operation mechanism and its benefit of demand side participation

Science.gov (United States)

Han, Shuai; Yan, Xu; Qin, Li-juan; Lin, Xi-qiao; Zeng, Bo

2017-08-01

Demand response plays an important role in maintaining the economic stability of the system, and has the characteristics of high efficiency, low cost, fast response, good environmental benefits and so on. Demand side resource is an important part of electricity market. The research of demand side resources in our country is still in the initial stage, but the opening of the electricity sales side provides a broad prospect for the development of electricity market. This paper summarizes the main types of demand side resources in our country, analyzes the economic principle of demand response from the micro perspective, puts forward some suggestions on the operation mechanism of China’s demand side resources participating in the electricity market under the condition of electricity sales side opening, analyzes the current situation of pricing in the electricity wholesale market and sets up the pricing strategy of the centralized wholesale market with the demand side power supply participating in quotation, which makes the social and economic benefits reach the maximum.

Emergency Management of Malignant Acute Left-Sided Colonic Obstruction

Science.gov (United States)

Trompetas, Vasileios

2008-01-01

INTRODUCTION The management of acute left-sided colonic obstruction still remains a challenging problem despite significant progress. METHODS A literature search was undertaken using PubMed and the Cochrane Library regarding the options in emergency management of left-sided colonic obstruction focusing on outcomes such as mortality, morbidity, long-term prognosis and cost effectiveness. DISCUSSION Colonic stenting is the best option either for palliation or as a bridge to surgery. It reduces morbidity and mortality rate and the need for colostomy formation. Stenting is likely to be cost effective, but data are variable depending on the individual healthcare system. Nevertheless, surgical management remains relevant as colonic stenting has a small rate of failure, and it is not always available. There are various surgical options. One-stage primary resection and anastomosis is the preferred choice for low-risk patients. Intra-operative colonic irrigation has no proven benefit. Subtotal colectomy is useful in cases of proximal bowel damage or synchronous tumours. Hartmann's procedure should be reserved for high-risk patients. Simple colostomy has no role other than for use in very ill patients who are not fit for any other procedure. PMID:18430330

Low-enthalpy geothermal resources for electricity production: A demand-side management study for intelligent communities

DEFF Research Database (Denmark)

Xydis, George A.; Nanaki, Evanthia A.; Koroneos, Christopher J.

2013-01-01

The geological conditions in Greece contributed to the creation of important low-enthalpy geothermal energy resources (LEGERs). The resources are divided into low, medium and high enthalpy, or temperature, based on criteria that are generally based on the energy content of the fluid. LEGERs...... and northern part of the country, as well as in many of the Aegean Islands. The aim of this work is to review the options for managing wind load by using low-enthalpy geothermal energy for electricity (through heat pump utilisation) according to the local energy demand....... are those sources of the hot water whose temperature is between 25 and 100°C, which are used for heating residences and in the agricultural or industrial sector. The investigation for the exploitation of low-enthalpy geothermal fluids, which began around 1980, intensified in the last two decades. The low...

Exploring Community-Oriented Approaches in Demand Side Management Projects in Europe

Directory of Open Access Journals (Sweden)

Anna Mengolini

2016-12-01

Full Text Available This paper seeks to investigate if the theoretical and political trends towards a more collective dimension of energy use are reflected in the design and development of demand side management (DSM pilot projects in Europe. Specifically, the paper analyses DSM projects in the database of the Joint Research Centre (JRC of the European Commission to capture signs of a new attention towards the wider context in which consumers live and towards the social dimension associated with energy consumption. To this end, the paper investigates the projects’ scope (in terms of project’s partners, end-use sectors and targeted services as well as the consumer engagement strategies that projects use. These elements reflect the projects’ consideration for the socio-economic dimension of the community where the pilots take place and their inclination to build on community dynamics. The analysis shows that DSM projects in the EU are increasingly being designed and developed with a collegial approach to energy consumption in mind, although an integrated approach is still missing. In addition, research is still needed to link the use of this innovative approach to project results. A closer look at the developments and results of these projects can help to identify what works and what doesn’t in real life experiences, thus supporting effective policy making at the EU and national level.

Marketing demand management in the commercial sector

International Nuclear Information System (INIS)

Fraser, M.E.

1990-01-01

Ontario Hydro has a marketing strategy for designing and implementing demand side management (DSM) programs, which marks a turnaround from previous years when marketing efforts were concentrated on selling electricity. Starting in the 1980s, marketing activities consisted, in effect, of coordinating relations between the customer, the market, and the utility. To achieve a better understanding of the needs of customers, the nature of the energy market, and the utilization of energy, the utility conducted research on the decision-making process associated with consumer choices of energy systems. To develop relations with its clientele in the commercial sector, the utility published an information bulletin and prepared an energy guide. Along with this initiative, the number of energy advisers to the commercial sector was increased in Ontario Hydro's regional offices. To improve understanding of each segment of the commercial market, the utility contacted organizations representing each segment as well as broader based organizations with the objective of creating opportunities to address this market, for example at conferences. Because of this philosophy of satisfying and understanding customer needs, Ontario Hydro has been in the process of commercializing demand-side management. Its high-efficiency lighting program is a good example in this regard. From a strategy which focused on a simple reduction in lighting in the 1970s, the utility has turned toward promoting efficient high-quality lighting which better responds to industry needs, to the point where industry itself has begun to promote the program. Such a strategy benefits industry, customers, and Ontario Hydro's demand-side management programs

Supply-side and demand-side policies for biosimilars: an overview in 10 European member states.

Science.gov (United States)

Rémuzat, Cécile; Kapuśniak, Anna; Caban, Aleksandra; Ionescu, Dan; Radière, Guerric; Mendoza, Cyril; Toumi, Mondher

2017-01-01

This study aimed to provide an overview of biosimilar policies in 10 EU MSs. Methods : Ten EU MS pharmaceutical markets (Belgium, France, Germany, Greece, Hungary, Italy, Poland, Spain, Sweden, and the UK) were selected. A comprehensive literature review was performed to identify supply-side and demand-side policies in place in the selected countries. Results : Supply-side policies for biosimilars commonly include price linkage, price re-evaluation, and tendering; the use of internal or external reference pricing varies between countries; health technology assessment is conducted in six countries. Regarding demand-side policies, pharmaceutical prescription budgets or quotas and monitoring of prescriptions (with potential financial incentives or penalties) are in place in eight and in seven countries respectively. Switching is generally allowed, but is solely the physician's responsibility. Automatic substitution is not recommended, or even forbidden, in most EU MSs. Prescription conditions or guidelines that apply to biosimilars are established in nearly all surveyed EU MSs. Conclusions : Important heterogeneity in policies on biosimilars was seen between (and even within) selected countries, which may partly explain variations in biosimilar uptake. Supply-side policies targeting price have been reported to limit biosimilar penetration in the long term, despite short-term savings, while demand-side policies are considered to positively impact uptake.

A Hybrid Genetic Wind Driven Heuristic Optimization Algorithm for Demand Side Management in Smart Grid

Directory of Open Access Journals (Sweden)

Nadeem Javaid

2017-03-01

Full Text Available In recent years, demand side management (DSM techniques have been designed for residential, industrial and commercial sectors. These techniques are very effective in flattening the load profile of customers in grid area networks. In this paper, a heuristic algorithms-based energy management controller is designed for a residential area in a smart grid. In essence, five heuristic algorithms (the genetic algorithm (GA, the binary particle swarm optimization (BPSO algorithm, the bacterial foraging optimization algorithm (BFOA, the wind-driven optimization (WDO algorithm and our proposed hybrid genetic wind-driven (GWD algorithm are evaluated. These algorithms are used for scheduling residential loads between peak hours (PHs and off-peak hours (OPHs in a real-time pricing (RTP environment while maximizing user comfort (UC and minimizing both electricity cost and the peak to average ratio (PAR. Moreover, these algorithms are tested in two scenarios: (i scheduling the load of a single home and (ii scheduling the load of multiple homes. Simulation results show that our proposed hybrid GWD algorithm performs better than the other heuristic algorithms in terms of the selected performance metrics.

Climate-related electricity demand-side management in oil-exporting countries--the case of the United Arab Emirates

International Nuclear Information System (INIS)

Al-Iriani, Mahmoud A.

2005-01-01

The oil crisis of the 1970s has increased the concern about the continuity of oil imports flow to major oil-importing developed countries. Numerous policy measures including electricity demand-side management (DSM) programs have been adopted in such countries. These measures aim at reducing the growing need for electricity power that increases the dependency on imported foreign oil and damages the environment. On the other hand, the perception that energy can be obtained at very low cost in oil-rich countries led to less attention being paid to the potential of DSM policies in these countries. This paper discusses such potential using the case of the United Arab Emirates (UAE). Since air conditioning is a major source of electric energy consumption, the relationship between climate conditions and electric energy consumption is considered. An electricity demand model is constructed using time series techniques. The fitted model seems to represent these relationships rather well. Forecasts for electricity consumption using the estimated model indicate that a small reduction in cooling degrees requirement might induce a significant reduction in electric energy demand. Hence, a DSM program is proposed with policy actions to include, among others, measures to reduce cooling degrees requirement

Demand Side Management in Nearly Zero Energy Buildings Using Heuristic Optimizations

Directory of Open Access Journals (Sweden)

Nadeem Javaid

2017-08-01

Full Text Available Today’s buildings are responsible for about 40% of total energy consumption and 30–40% of carbon emissions, which are key concerns for the sustainable development of any society. The excessive usage of grid energy raises sustainability issues in the face of global changes, such as climate change, population, economic growths, etc. Traditionally, the power systems that deliver this commodity are fuel operated and lead towards high carbon emissions and global warming. To overcome these issues, the recent concept of the nearly zero energy building (nZEB has attracted numerous researchers and industry for the construction and management of the new generation buildings. In this regard, this paper proposes various demand side management (DSM programs using the genetic algorithm (GA, teaching learning-based optimization (TLBO, the enhanced differential evolution (EDE algorithm and the proposed enhanced differential teaching learning algorithm (EDTLA to manage energy and comfort, while taking the human preferences into consideration. Power consumption patterns of shiftable home appliances are modified in response to the real-time price signal in order to get monetary benefits. To further improve the cost and user discomfort objectives along with reduced carbon emission, renewable energy sources (RESs are also integrated into the microgrid (MG. The proposed model is implemented in a smart residential complex of multiple homes under a real-time pricing environment. We figure out two feasible regions: one for electricity cost and the other for user discomfort. The proposed model aims to deal with the stochastic nature of RESs while introducing the battery storage system (BSS. The main objectives of this paper include: (1 integration of RESs; (2 minimization of the electricity bill (cost and discomfort; and (3 minimizing the peak to average ratio (PAR and carbon emission. Additionally, we also analyze the tradeoff between two conflicting objectives

Review of US utility demand-side bidding programs

International Nuclear Information System (INIS)

Goldman, C.A.; Kito, M.S.

1995-01-01

In this study, we review utility experiences with demand-side management (DSM) bidding programs. Since 1987, about 35 US utilities have signed long-term contracts with developers of DSM resources (ie energy service companies and customers) to provide a quantity of demand and energy savings at specified prices. Total resource costs range between 5.4 and 8 cents/kWh for DSM bidding programs where complete information on program costs is available. Almost all DSM bidding programs have been cost-effective compared with the utility's own supply-side alternatives, although there is substantial disagreement regarding the value of these programs compared with the utility's own DSM programs. In most bidding programs, payments to bidders account for between 70 and 90% of total program costs. Variation in winning bid prices is influenced primarily by DSM bid ceiling prices, differences in the mix of measures and markets targeted by developers, and the degree of performance risk borne by the DSM developer. Bids targeting residential customers averaged 6.2 cents/kWh compared with about 5.0 cents/kWh for commercial/industrial bids. We also compared the costs of acquiring lighting savings in DSM bidding contracts with a sample of 20 utility sponsored commercial/industrial lighting programs. We found that, on average total resource costs were slightly higher in bidding programs (6.1 vs 5.6 cents/kWh), although ratepayers bear significantly less performance risk in bidding programs compared with traditional utility-sponsored DSM programs. (author)

Designing cost effective water demand management programs in Australia.

Science.gov (United States)

White, S B; Fane, S A

2002-01-01

This paper describes recent experience with integrated resource planning (IRP) and the application of least cost planning (LCP) for the evaluation of demand management strategies in urban water. Two Australian case studies, Sydney and Northern New South Wales (NSW) are used in illustration. LCP can determine the most cost effective means of providing water services or alternatively the cheapest forms of water conservation. LCP contrasts to a traditional approach of evaluation which looks only at means of increasing supply. Detailed investigation of water usage, known as end-use analysis, is required for LCP. End-use analysis allows both rigorous demand forecasting, and the development and evaluation of conservation strategies. Strategies include education campaigns, increasing water use efficiency and promoting wastewater reuse or rainwater tanks. The optimal mix of conservation strategies and conventional capacity expansion is identified based on levelised unit cost. IRP uses LCP in the iterative process, evaluating and assessing options, investing in selected options, measuring the results, and then re-evaluating options. Key to this process is the design of cost effective demand management programs. IRP however includes a range of parameters beyond least economic cost in the planning process and program designs, including uncertainty, benefit partitioning and implementation considerations.

Supply-side and demand-side policies for biosimilars: an overview in 10 European member states

Science.gov (United States)

Rémuzat, Cécile; Kapuśniak, Anna; Caban, Aleksandra; Ionescu, Dan; Radière, Guerric; Mendoza, Cyril; Toumi, Mondher

2017-01-01

ABSTRACT Objective: This study aimed to provide an overview of biosimilar policies in 10 EU MSs. Methods: Ten EU MS pharmaceutical markets (Belgium, France, Germany, Greece, Hungary, Italy, Poland, Spain, Sweden, and the UK) were selected. A comprehensive literature review was performed to identify supply-side and demand-side policies in place in the selected countries. Results: Supply-side policies for biosimilars commonly include price linkage, price re-evaluation, and tendering; the use of internal or external reference pricing varies between countries; health technology assessment is conducted in six countries. Regarding demand-side policies, pharmaceutical prescription budgets or quotas and monitoring of prescriptions (with potential financial incentives or penalties) are in place in eight and in seven countries respectively. Switching is generally allowed, but is solely the physician’s responsibility. Automatic substitution is not recommended, or even forbidden, in most EU MSs. Prescription conditions or guidelines that apply to biosimilars are established in nearly all surveyed EU MSs. Conclusions: Important heterogeneity in policies on biosimilars was seen between (and even within) selected countries, which may partly explain variations in biosimilar uptake. Supply-side policies targeting price have been reported to limit biosimilar penetration in the long term, despite short-term savings, while demand-side policies are considered to positively impact uptake. PMID:28740617

Deep Neural Network Based Demand Side Short Term Load Forecasting

Directory of Open Access Journals (Sweden)

Seunghyoung Ryu

2016-12-01

Full Text Available In the smart grid, one of the most important research areas is load forecasting; it spans from traditional time series analyses to recent machine learning approaches and mostly focuses on forecasting aggregated electricity consumption. However, the importance of demand side energy management, including individual load forecasting, is becoming critical. In this paper, we propose deep neural network (DNN-based load forecasting models and apply them to a demand side empirical load database. DNNs are trained in two different ways: a pre-training restricted Boltzmann machine and using the rectified linear unit without pre-training. DNN forecasting models are trained by individual customer’s electricity consumption data and regional meteorological elements. To verify the performance of DNNs, forecasting results are compared with a shallow neural network (SNN, a double seasonal Holt–Winters (DSHW model and the autoregressive integrated moving average (ARIMA. The mean absolute percentage error (MAPE and relative root mean square error (RRMSE are used for verification. Our results show that DNNs exhibit accurate and robust predictions compared to other forecasting models, e.g., MAPE and RRMSE are reduced by up to 17% and 22% compared to SNN and 9% and 29% compared to DSHW.

Effect of demand management on regulated and deregulated electricity sectors

International Nuclear Information System (INIS)

Fahrioglu, Murat

2016-01-01

Our society derives a quantifiable benefit from electric power. In particular, forced outages or blackouts have enormous consequences on society, one of which is loss of economic surplus. The society relies on having a continuous supply of electrical energy. Some customers may willingly risk this continuous supply and participate in demand management programs for electrical power. If the power system grid is in trouble, electric utilities need to have demand relief. Customers willing to reduce their demand to help the system can receive an incentive fee for helping the utilities. Demand relief can be system wide or location specific. Sometimes it can be more effective to fix the electrical demand vs. supply imbalance from the demand side. The value of demand management contracts is greatly affected by customer location. Inclusion of locational attributes into the contract design procedure increases the effectiveness of the contracts by helping a utility get more value from its demand management programs. Independent System Operators and regulators, among others, can also benefit from effective demand management. This paper will investigate how this type of demand management contracts can help the electricity sector both in regulated and deregulated environments. - Highlights: • Demand management can help prevent forced electricity outages. • Both electric utilities and ISOs can use demand management. • Regulated and deregulated electricity sectors can benefit from demand management. • Demand management contracts can be effectively used in power system grids.

From demand side management (DSM) to energy efficiency services: A Finnish case study

International Nuclear Information System (INIS)

Apajalahti, Eeva-Lotta; Lovio, Raimo; Heiskanen, Eva

2015-01-01

Energy conservation is expected to contribute significantly to climate change mitigation and energy security. Traditionally, energy companies have had strong role in providing Demand Side Management (DSM) measures. However, after energy market liberalization in Europe, energy companies' DSM activities declined. In response, the EU issued Directive (2006/32/EC) on energy end-use efficiency and energy services (ESD) to motivate energy companies to promote energy efficiency and conservation, closely followed by Directive (2012/27/EU) on energy efficiency (EED), requiring the setting up energy efficiency obligation schemes. Despite strong political and economic motivation, energy companies struggle to develop energy efficiency services in liberalised energy markets due to conflicting institutional demands, which arise from contradicting policy requirements and customer relations. The main challenges in developing new innovative energy efficiency services, evidenced by an in-depth case study, were (1) the unbundling of energy company operations, which makes it difficult to develop services when the contribution of several business units is required and (2) the distrust among energy end-users, which renders the business logic of energy saving contract models self-contradictory. On the basis of the research, avenues out of these dilemmas are suggested. -- Highlights: •Energy companies struggle to become energy service provides •We explore the development of new energy saving business solutions •Dispersed organisational structure leaves energy saving business as isolated function •Strong consumer scepticism towards energy companies as providers of energy saving •More emphasis on the changing company-customer relationship is needed

Challenges of using model predictive control for active demand side management

DEFF Research Database (Denmark)

Zong, Yi; You, Shi; Hu, Junjie

2015-01-01

When there is a high penetration of renewables in the power system, it requires coordinated management of large numbers of distributed and demand response resources, intermittent resources to maintain the grid reliability and improve operational economics. This paper presents a hierarchical...... and dynamic power price signals....

Financial incentives for DSM [demand-side management]: Theory and practice

International Nuclear Information System (INIS)

Reid, M.W.

1990-01-01

Recent efforts to provide incentives for electric utilities in the USA to undertake demand-side management (DSM) programs are reviewed. The major need for incentives is seen as the overcoming of disincentives inherent in traditional regulation that affect utilities' interest in, and motivation for, DSM programs. These disincentives include the failure to recover all program costs, loss of revenues, and loss of financial opportunity. In addition, utilities seldom perceive DSM as a low-risk proposition; principal areas of concern include regulatory risk, competitive risk, and balance sheet risk. In view of these disincentives and risks, any DSM program therefore should provide for full and timely recovery of all program costs; adjust for DSM-induced revenue losses; and counterbalance risk and loss of financial opportunity by providing a bonus above cost. Three utility-specific incentive proposals are presented for the case of utilities in New York, Massachusetts, and Pennsylvania. Each of these programs meets the goal of overcoming the disincentives that surround utility DSM programs. The most significant differences across the mechanisms are found in the bonus component. Mechanisms that reduce the utility's uncertainty about the receipt of a bonus by providing it in a lump sum will likely prove more powerful motivators than those that spread the bonus out over a period of years. Use of preapproved per-unit or per-customer impact measurements reduces uncertainty and thus increases the apparent value of the bonus. Annual review of program plans and assumed impacts, supported by continuing evaluation activities, minimizes the risk that the utilities will gamble with the system or receive excessive awards. 6 refs

Demand side management in a day-ahead wholesale market: A comparison of industrial & social welfare approaches

International Nuclear Information System (INIS)

Jiang, Bo; Farid, Amro M.; Youcef-Toumi, Kamal

2015-01-01

Highlights: • We compare two demand side management in a day-ahead electricity wholesale market. • We develop and reconcile social welfare & industrial DSM mathematical models. • We show the industrial netload has an additional forecast quantity of baseline. • We analytically and numerically show the model equivalence with accurate baseline. • We numerically demonstrate the baseline errors lead to higher and costlier dispatch. - Abstract: The intermittent nature of renewable energy has been discussed in the context of the operational challenges that it brings to electrical grid reliability. Demand side management (DSM) with its ability to allow customers to adjust electricity consumption in response to market signals has often been recognized as an efficient way to mitigate the variable effects of renewable energy as well as to increase system efficiency and reduce system costs. However, the academic & industrial literature have taken divergent approaches to DSM implementation. While the popular approach among academia adopts a social welfare maximization formulation, the industrial practice compensates customers according to their load reduction from a predefined electricity consumption baseline that would have occurred without DSM. This paper rigorously compares these two different approaches in a day-ahead wholesale market context analytically and in a test case using the same system configuration and mathematical formalism. The comparison of the two models showed that a proper reconciliation of the two models might make them mitigate the stochastic netload in fundamentally the same way, but only under very specific conditions which are rarely met in practice. While the social welfare model uses a stochastic net load composed of two terms, the industrial DSM model uses a stochastic net load composed of three terms including the additional baseline term. DSM participants are likely to manipulate the baseline in order to receive greater financial

An assessment of energy options for a remote first nation community. Paper no. IGEC-1-055

International Nuclear Information System (INIS)

Ianniciello, C.; Wild, P.; Pitt, L.; Artz, S.

2005-01-01

Development of renewable energy systems for remote communities is gaining interest among government, utilities, NGOs and the communities themselves as a means of improving lifestyles of community members and showcasing renewable energy systems. The Huu-ay-aht First Nation, whose traditional territory is located on the west side of Vancouver Island in British Columbia, is a community which has energy related problems and energy related opportunities. The objective of this study is to assess possible energy options for the Huu-ay-aht First Nation traditional territory. Current and future energy services within the territory were used as the starting point for developing energy system options. Extensive consultation with community members was instrumental in clearly defining the objectives of the study and understanding the territory's energy demand. The energy demand assessment included an estimation of the electric, heating and transportation loads in the community, an assessment of efficiency and demand side management (DSM) options, and an estimation of potential future demand scenarios. Energy resources were assessed, with viable ones retained for consideration in potential energy system options. The information from the community consultations, demand estimates and resource assessments are being used in the development and analysis of energy system options to support the Huu-ay-aht's energy needs and community goals. (author)

Economy of conservation options in industry and developed environment. Part 2

International Nuclear Information System (INIS)

1994-03-01

To determine the optimal situation for the energy supply in the working area of the IJsselmij and Sep the study on the title subject was carried out. To influence the energy demand demand-side management (DSM) as part of integrated resource planning (IRP) is applied. Several scenarios to determine whether new production capacity must be installed or conservation options and activities should be realized are elaborated and calculated by means of the COMPASS model. E3T compiled input data for the demand-side of the model: energy consumption and energy conservation, investment cost and operational cost per user, number of installations and the development of the penetration of the conservation options between 1990 and 2010, and required subsidies and promotional costs of the IJsselmij to introduce such options. Six of the options were selected and elaborated in detail. The results are presented in this report for the options: coverage of cooling and freezing equipment at night, frequency control of electric motors, decentralized heat production by means of advanced burners, indoor climate control in the built environment, reflectors for TL-lighting systems in the built environment, and behavioral change in industrial companies. In part 1 an overview is given of the economics, the selection and elaboration of the energy conservation options. 9 figs., 53 tabs., 71 refs., 1 appendix

Optimal energy efficiency policies and regulatory demand-side management tests: How well do they match?

International Nuclear Information System (INIS)

Brennan, Timothy J.

2010-01-01

Under conventional models, subsidizing energy efficiency requires electricity to be priced below marginal cost. Its benefits increase when electricity prices increase to finance the subsidy. With high prices, subsidies are counterproductive unless consumers fail to make efficiency investments when private benefits exceed costs. If the gain from adopting efficiency is only reduced electricity spending, capping revenues from energy sales may induce a utility to substitute efficiency for generation when the former is less costly. This goes beyond standard 'decoupling' of distribution revenues from sales, requiring complex energy price regulation. The models' results are used to evaluate tests in the 2002 California Standard Practice Manual for assessing demand-side management programs. Its 'Ratepayer Impact Measure' test best conforms to the condition that electricity price is too low. Its 'Total Resource Cost' and 'Societal Cost' tests resemble the condition for expanded decoupling. No test incorporates optimality conditions apart from consumer choice failure.

Demand-Side Flexibility for Energy Transitions: Policy Recommendations for Developing Demand Response

OpenAIRE

Nursimulu, Anjali; Florin, Marie-Valentine; Vuille, François

2016-01-01

As a follow-up to IRGC's report on demand-side flexibility for energy transitions, this Policy Brief highlights that increasing flexibility in power systems is needed to accommodate higher shares of non-controllable and intermittent renewable generation, and that this requires changes to the market design and regulatory framework, to facilitate the development and deployment of appropriate technologies and market-based instruments (e.g. taxes and subsidies). The Policy Brief focuses on demand...

A Multi-Objective Demand Side Management Considering ENS Cost in Smart Grids

DEFF Research Database (Denmark)

Yousefi Khanghah, Babak; Ghassemzadeh, Saeid; Hosseini, Seyed Hossein

2017-01-01

In this paper a new method is presented to achieve economic exploitation and proper usage of network capacity by exerting controlling actions over flexible loads and energy storage (ES) equipment. Multi-objective planning for demand response programs (DRP) and battery management policies is carried...... out by considering energy not supplied (ENS). In order to achieve an optimal scheduling, charge/discharge control for batteries, demand response programs and dispatch of controllable distributed generations (DGs) are also considered. Then, the balanced cost and benefits of participants are evaluated...

Economy of conservation options in the industry and the built environment. Part 1

International Nuclear Information System (INIS)

1994-03-01

To determine the optimal situation for the energy supply in the working area of the IJsselmij and Sep the study on the title subject was carried out. To influence the energy demand demand-side management (DSM) as part of integrated resource planning (IRP) is applied. Several scenarios to determine whether new production capacity must be installed or conservation options and activities should be realized are elaborated and calculated by means of the COMPASS model. E3T compiled input data for the demand-side of the model: energy consumption and energy conservation, investment cost and operational cost per user, number of installations and the development of the penetration of the conservation options between 1990 and 2010, and required subsidies and promotional costs of the IJsselmij to introduce such options. The economics of the energy conservation options are given in chapter 2. Six of the options were selected and elaborated in detail in a separate publication (part 2): coverage of cooling and freezing equipment at night, frequency control of electric motors, decentralized heat production by means of advanced burners, indoor climate control in the built environment, reflectors for TL-lighting systems in the built environment, and behavioral change in industrial companies. 2 figs., 7 tabs., 7 refs., 4 appendices

Coordinating Demand-Side Efficiency Evaluation, Measurement and Verification Among Western States: Options for Documenting Energy and Non-Energy Impacts for the Power Sector

Energy Technology Data Exchange (ETDEWEB)

Schiller, Steven R. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Schwartz, Lisa C. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2016-06-22

Demand-side energy efficiency (efficiency) represents a low-cost opportunity to reduce electricity consumption and demand and provide a wide range of non-energy benefits, including avoiding air pollution. Efficiency-related energy and non-energy impacts are determined and documented by implementing evaluation, measurement and verification (EM&V) systems. This technical brief describes efficiency EM&V coordination strategies that Western states can consider taking on together, outlines EM&V-related products that might be appropriate for multistate coordination, and identifies some implications of coordination. Coordinating efficiency EM&V activities can save both time and costs for state agencies and stakeholders engaged in efficiency activities and can be particularly beneficial for multiple states served by the same utility. First, the brief summarizes basic information on efficiency, its myriad potential benefits and EM&V for assessing those benefits. Second, the brief introduces the concept of multistate EM&V coordination in the context of assessing such benefits, including achievement of state and federal goals to reduce air pollutants.1 Next, the brief presents three coordination strategy options for efficiency EM&V: information clearinghouse/exchange, EM&V product development, and a regional energy efficiency tracking system platform. The brief then describes five regional EM&V products that could be developed on a multistate basis: EM&V reporting formats, database of consistent deemed electricity savings values, glossary of definitions and concepts, efficiency EM&V methodologies, and EM&V professional standards or accreditation processes. Finally, the brief discusses options for next steps that Western states can take to consider multistate coordination on efficiency EM&V. Appendices provide background information on efficiency and EM&V, as well as definitions and suggested resources on the covered topics. This brief is intended to inform state public

Lessons learned from new construction utility demand side management programs and their implications for implementing building energy codes

Energy Technology Data Exchange (ETDEWEB)

Wise, B.K.; Hughes, K.R.; Danko, S.L.; Gilbride, T.L.

1994-07-01

This report was prepared for the US Department of Energy (DOE) Office of Codes and Standards by the Pacific Northwest Laboratory (PNL) through its Building Energy Standards Program (BESP). The purpose of this task was to identify demand-side management (DSM) strategies for new construction that utilities have adopted or developed to promote energy-efficient design and construction. PNL conducted a survey of utilities and used the information gathered to extrapolate lessons learned and to identify evolving trends in utility new-construction DSM programs. The ultimate goal of the task is to identify opportunities where states might work collaboratively with utilities to promote the adoption, implementation, and enforcement of energy-efficient building energy codes.

The electric energy demand-side planning: necessity and possibilities of execution

International Nuclear Information System (INIS)

Sposito, E.S.

1991-05-01

Aiming at reducing the level of investments, is presented a demand-side planning approach, divided into two parts. The first part is an analysis on the actual need of our demand-side approaching. In view of this, is showed a set of data and comments both on economic and technological aspects concerning the electric network and sector, as well as evaluation of the social, ecological and financial aspects which could act against the full expansion of the electric system. In the second part, a demand-side planning methodology is introduced, as well as its main concepts, its variables and its instruments of affecting the demand: energy conservation, replacement of sources, reduction of losses and electric power decentralized generation. Each of them is fully detailed in a set of planning policies and actions. Concluding is presented the basic elements of a National Electric Energy Substitution and Conservation Plan - PLANSCON. (author)

Impact of Demand-Side Management on Thermal Comfort and Energy Costs in a Residential nZEB

Directory of Open Access Journals (Sweden)

Thibault Q. Péan

2017-05-01

Full Text Available In this study, simulation work has been carried out to investigate the impact of a demand-side management control strategy in a residential nZEB. A refurbished apartment within a multi-family dwelling representative of Mediterranean building habits was chosen as a study case and modelled within a simulation framework. A flexibility strategy based on set-point modulation depending on the energy price was applied to the building. The impact of the control strategy on thermal comfort was studied in detail with several methods retrieved from the standards or other literature, differentiating the effects on day and night living zones. It revealed a slight decrease of comfort when implementing flexibility, although this was not prejudicial. In addition, the applied strategy caused a simultaneous increase of the electricity used for heating by up to 7% and a reduction of the corresponding energy costs by up to around 20%. The proposed control thereby constitutes a promising solution for shifting heating loads towards periods of lower prices and is able to provide benefits for both the user and the grid sides. Beyond that, the activation of energy flexibility in buildings (nZEB in the present case will participate in a more successful integration of renewable energy sources (RES in the energy mix.

On the Mobile Communication Requirements for the Demand-Side Management of Electric Vehicles

Directory of Open Access Journals (Sweden)

Stefano Rinaldi

2018-05-01

Full Text Available The rising concerns about global warming and environmental pollution are increasingly pushing towards the replacement of road vehicles powered by Internal Combustion Engines (ICEs. Electric Vehicles (EVs are generally considered the best candidates for this transition, however, existing power grids and EV management systems are not yet ready for a large penetration of EVs, and the current opinion of the scientific community is that further research must be done in this field. The so-called Vehicle-to-Grid (V2G concept plays a relevant role in this scenario by providing the communication capabilities required by advanced control and Demand-Side Management (DSM strategies. Following this research trend, in this paper the communication requirements for the DSM of EVs in urban environments are discussed, by focusing on the mobile communication among EVs and smart grids. A specific system architecture for the DSM of EVs moving inside urban areas is proposed and discussed in terms of the required data throughput. In addition, the use of a Low-Power Wide-Area Network (LPWAN solution—the Long-Range Wide Area Network (LoRaWAN technology—is proposed as a possible alternative to cellular-like solutions, by testing an experimental communication infrastructure in a real environment. The results show that the proposed LPWAN technology is capable to handle an adequate amount of information for the considered application, and that one LoRa base station is able to serve up to 438 EVs per cell, and 1408 EV charging points.

Market modeling for assessment of demand side programs using the marginal cost

International Nuclear Information System (INIS)

Papastamatiou, Panagiotis; Psarras, John

2000-01-01

Demand side management is nowadays considered as a functional step in the energy planning process. The criteria proposed for the assessment of the demand side programs (DSPs) are usually based on the balance between the marginal supply cost and the mean DSP cost. These criteria could not support the allotting of the invested capital to incentives for the consumers and advertising. This paper presents a methodology to support the utility planning at this point with more reliability. It proposes the expansion of the assessment criteria with the use of the marginal cost of the DSP. For the calculation of the DSP marginal cost, a dynamic model is developed and it is used for the simulation of the penetration of a DS Program. Using the 'least-cost' criterion as the decision rule for the simulation, the planner has a distribution of the available investment capital throughout the whole planning period. The use of the 'most-value' criterion supports the separation of the invested capital between incentives for the consumers and supportive expenses, e.g. advertising, marketing cost, etc. (Author)

New Real-Time Market Facilitating Demand-Side Resources for System Balancing

DEFF Research Database (Denmark)

Feng, Donghan; Nyeng, Preben; Xie, Jun

2011-01-01

Many demand side resources have the potential to provide fast and low cost balancing services. Switching these devices on and off can be executed in seconds and have limited consequences for the customers if the duration is not long. With carefully designed market rules, tens of thousands...... the participation of demand-side resources. In light of the future environment of increasing intermittent renewable power and distributed energy/storage resources, stochastic time-series and Monte-Carlo simulation are used to analyze the relationship between balancing requirement and generation/demand uncertainties...

The past, present, and future of U.S. utility demand-side management programs

International Nuclear Information System (INIS)

Eto, J.

1996-12-01

Demand-side management or DSM refers to active efforts by electric and gas utilities to modify customers' energy use patterns. The experience in the US shows that utilities, when provided with appropriate incentives, can provide a powerful stimulus to energy efficiency in the private sector. This paper describes the range and history of DSM programs offered by US electric utilities, with a focus on the political, economic, and regulatory events that have shaped their evolution. It also describes the changes these programs are undergoing as a result of US electricity industry restructuring. DSM programs began modestly in the 1970s in response to growing concerns about dependence on foreign sources of oil and environmental consequences of electricity generation, especially nuclear power. The foundation for the unique US partnership between government and utility interests can be traced first to the private-ownership structure of the vertically integrated electricity industry and second to the monopoly franchise granted by state regulators. Electricity industry restructuring calls into question both of these basic conditions, and thus the future of utility DSM programs for the public interest. Future policies guiding ratepayer-funded energy-efficiency DSM programs will need to pay close attention to the specific market objectives of the programs and to the balance between public and private interests

The past, present, and future of U.S. utility demand-side management programs

Energy Technology Data Exchange (ETDEWEB)

Eto, J. [Lawrence Berkeley National Lab., CA (United States). Environmental Energy Technologies Div.

1996-12-01

Demand-side management or DSM refers to active efforts by electric and gas utilities to modify customers` energy use patterns. The experience in the US shows that utilities, when provided with appropriate incentives, can provide a powerful stimulus to energy efficiency in the private sector. This paper describes the range and history of DSM programs offered by US electric utilities, with a focus on the political, economic, and regulatory events that have shaped their evolution. It also describes the changes these programs are undergoing as a result of US electricity industry restructuring. DSM programs began modestly in the 1970s in response to growing concerns about dependence on foreign sources of oil and environmental consequences of electricity generation, especially nuclear power. The foundation for the unique US partnership between government and utility interests can be traced first to the private-ownership structure of the vertically integrated electricity industry and second to the monopoly franchise granted by state regulators. Electricity industry restructuring calls into question both of these basic conditions, and thus the future of utility DSM programs for the public interest. Future policies guiding ratepayer-funded energy-efficiency DSM programs will need to pay close attention to the specific market objectives of the programs and to the balance between public and private interests.

Controlling market power and price spikes in electricity networks: Demand-side bidding.

Science.gov (United States)

Rassenti, Stephen J; Smith, Vernon L; Wilson, Bart J

2003-03-04

In this article we report an experiment that examines how demand-side bidding can discipline generators in a market for electric power. First we develop a treatment without demand-side bidding; two large firms are allocated baseload and intermediate cost generators such that either firm might unilaterally withhold the capacity of its intermediate cost generators from the market to benefit from the supracompetitive prices that would result from only selling its baseload units. In a converse treatment, ownership of some of the intermediate cost generators is transferred from each of these firms to two other firms such that no one firm could unilaterally restrict output to spawn supracompetitive prices. Having established a well controlled data set with price spikes paralleling those observed in the naturally occurring economy, we also extend the design to include demand-side bidding. We find that demand-side bidding completely neutralizes the exercise of market power and eliminates price spikes even in the presence of structural market power.

Domestic demand-side management (DSM): Role of heat pumps and thermal energy storage (TES) systems

International Nuclear Information System (INIS)

Arteconi, A.; Hewitt, N.J.; Polonara, F.

2013-01-01

Heat pumps are seen as a promising technology for load management in the built environment, in combination with the smart grid concept. They can be coupled with thermal energy storage (TES) systems to shift electrical loads from high-peak to off-peak hours, thus serving as a powerful tool in demand-side management (DSM). This paper analyzes heat pumps with radiators or underfloor heating distribution systems coupled with TES with a view to showing how a heat pump system behaves and how it influences the building occupants' thermal comfort under a DSM strategy designed to flatten the shape of the electricity load curve by switching off the heat pump during peak hours (16:00–19:00). The reference scenario for the analysis was Northern Ireland (UK). The results showed that the heat pump is a good tool for the purposes of DSM, also thanks to the use of TES systems, in particular with heating distribution systems that have a low thermal inertia, e.g. radiators. It proved possible to achieve a good control of the indoor temperature, even if the heat pump was turned off for 3 h, and to reduce the electricity bill if a “time of use” tariff structure was adopted. -- Highlights: ► Heat pump heating systems with thermal energy storage are considered. ► System behavior is investigated during a DSM strategy for reducing peak energy demand. ► Heat pump heating systems demonstrate to be able to have an active role in DSM programs. ► A TES system must be coupled with the heat pump in presence of low thermal inertia heating distribution systems. ► Central role played by incentives schemes to promote this technology

Modeling storage and demand management in power distribution grids

International Nuclear Information System (INIS)

Schroeder, Andreas

2011-01-01

Grahical abstract: The model informs an optimal investment sizing decision as regards specific 'smart grid' applications such as storage facilities and meters enabling load control. Results indicate that central storage facilities are a more promising option for generation cost reductions as compared to demand management. Highlights: → Stochastic versus deterministic model increases investment efficiency up to 5%. → Deterministic model under-estimates value of load control and storage. → Battery storage is beneficial at investment cost below 850 EUR/MW h. → Demand management equipment is not beneficial at cost beyond 200 EUR. → The stylized 10 kV grid constitutes no shortage factor. -- Abstract: Storage devices and demand control may constitute beneficial tools to optimize electricity generation with a large share of intermittent resources through inter-temporal substitution of load. This paper quantifies the related cost reductions in a simulation model of a simplified stylized medium-voltage grid (10 kV) under uncertain demand and wind output. Benders Decomposition Method is applied to create a two-stage stochastic optimization program. The model informs an optimal investment sizing decision as regards specific 'smart' applications such as storage facilities and meters enabling load control. Model results indicate that central storage facilities are a more promising option for generation cost reductions as compared to demand management. Grid extensions are not appropriate in any of the scenarios. A sensitivity analysis is applied with respect to the market penetration of uncoordinated Plug-In Electric Vehicles which are found to strongly encourage investment into load control equipment for 'smart' charging and slightly improve the case for central storage devices.

Demand side resource operation on the Irish power system with high wind power penetration

International Nuclear Information System (INIS)

Keane, A.; Tuohy, A.; Meibom, P.; Denny, E.; Flynn, D.; Mullane, A.; O'Malley, M.

2011-01-01

The utilisation of demand side resources is set to increase over the coming years with the advent of advanced metering infrastructure, home area networks and the promotion of increased energy efficiency. Demand side resources are proposed as an energy resource that, through aggregation, can form part of the power system plant mix and contribute to the flexible operation of a power system. A model for demand side resources is proposed here that captures its key characteristics for commitment and dispatch calculations. The model is tested on the all island Irish power system, and the operation of the model is simulated over one year in both a stochastic and deterministic mode, to illustrate the impact of wind and load uncertainty. The results illustrate that demand side resources can contribute to the efficient, flexible operation of systems with high penetrations of wind by replacing some of the functions of conventional peaking plant. Demand side resources are also shown to be capable of improving the reliability of the system, with reserve capability identified as a key requirement in this respect. - Highlights: → Demand side resource model presented for use in unit commitment and dispatch calculations. → Benefits of demand side aggregation demonstrated specifically as a peaking unit and provider of reserve. → Potential to displace or defer construction of conventional peaking units.

Supply-side and demand-side policies for biosimilars: an overview in 10 European member states

OpenAIRE

R?muzat, C?cile; Kapu?niak, Anna; Caban, Aleksandra; Ionescu, Dan; Radi?re, Guerric; Mendoza, Cyril; Toumi, Mondher

2017-01-01

ABSTRACT Objective: This study aimed to provide an overview of biosimilar?policies in 10 EU MSs. Methods: Ten EU MS pharmaceutical markets (Belgium, France, Germany, Greece, Hungary, Italy, Poland, Spain, Sweden, and the UK) were selected. A comprehensive literature review?was performed to identify supply-side and demand-side policies in place in the selected countries. Results: Supply-side policies for biosimilars commonly include price linkage, price re-evaluation, and tendering; the use of...

Directed graph based carbon flow tracing for demand side carbon obligation allocation

DEFF Research Database (Denmark)

Sun, Tao; Feng, Donghan; Ding, Teng

2016-01-01

In order to achieve carbon emission abatement, some researchers and policy makers have cast their focus on demand side carbon abatement potentials. This paper addresses the problem of carbon flow calculation in power systems and carbon obligation allocation at demand side. A directed graph based...... method for tracing carbon flow is proposed. In a lossy network, matrices such as carbon losses, net carbon intensity (NCI) and footprint carbon intensity (FCI) are obtained with the proposed method and used to allocate carbon obligation at demand side. Case studies based on realistic distribution...... and transmission systems are provided to demonstrate the effectiveness of the proposed method....

Unlocking the potential for efficiency and demand response throughadvanced metering

Energy Technology Data Exchange (ETDEWEB)

Levy, Roger; Herter, Karen; Wilson, John

2004-06-30

Reliance on the standard cumulative kilowatt-hour meter substantially compromises energy efficiency and demand response programs. Without advanced metering, utilities cannot support time-differentiated rates or collect the detailed customer usage information necessary to (1)educate the customer to the economic value of efficiency and demand response options, or (2) distribute load management incentives proportional to customer contribution. These deficiencies prevent the customer feedback mechanisms that would otherwise encourage economically sound demand-side investments and behaviors. Thus, the inability to collect or properly price electricity usage handicaps the success of almost all efficiency and demand response options. Historically, implementation of the advanced metering infrastructure (AMI) necessary for the successful efficiency and demand response programs has been prevented by inadequate cost-benefit analyses. A recent California effort has produced an expanded cost-effectiveness methodology for AMI that introduces previously excluded benefits. In addition to utility-centric costs and benefits, the new model includes qualitative and quantitative costs and benefits that accrue to both customers and society.

Side Effects (Management)

Science.gov (United States)

... cancer care is relieving side effects, called symptom management, palliative care, or supportive care. It is important ... treat them. To learn about the symptoms and management of the long-term side effects of cancer ...

Predictive Control of Demand Side Units Participating in the Primary Frequency Reserve Market

DEFF Research Database (Denmark)

Biegel, Benjamin; Stoustrup, Jakob; Andersen, Palle

2013-01-01

We consider an aggregator controlling a mixed portfolio of conventional power generators and demand side units. The generators are controllable within certain power and ramp limitations while the demand side units are characterized by flexible consumptions and therefore can be treated as energy...

Margin Requirements and Equity Option Returns

DEFF Research Database (Denmark)

Hitzemann, Steffen; Hofmann, Michael; Uhrig-Homburg, Marliese

In equity option markets, traders face margin requirements both for the options themselves and for hedging-related positions in the underlying stock market. We show that these requirements carry a significant margin premium in the cross-section of equity option returns. The sign of the margin...... premium depends on demand pressure: If end-users are on the long side of the market, option returns decrease with margins, while they increase otherwise. Our results are statistically and economically significant and robust to different margin specifications and various control variables. We explain our...... findings by a model of funding-constrained derivatives dealers that require compensation for satisfying end-users’ option demand....

Margin Requirements and Equity Option Returns

DEFF Research Database (Denmark)

Hitzemann, Steffen; Hofmann, Michael; Uhrig-Homburg, Marliese

In equity option markets, traders face margin requirements both for the options themselves and for hedging-related positions in the underlying stock market. We show that these requirements carry a significant "margin premium" in the cross-section of equity option returns. The sign of the margin...... premium depends on demand pressure: If end-users are on the long side of the market, option returns decrease with margins, while they increase otherwise. Our results are statistically and economically significant and robust to different margin specifications and various control variables. We explain our...... findings by a model of funding-constrained derivatives dealers that require compensation for satisfying end-users’ option demand....

Efficacy of a Targeted Drug Delivery on-Demand Bolus Option for Chronic Pain.

Science.gov (United States)

Bolash, Robert B; Niazi, Tariq; Kumari, Meera; Azer, Gerges; Mekhail, Nagy

2018-03-01

Intrathecal targeted drug delivery systems historically required physician office visits for dose adjustment to manage fluctuating pain. A wireless device now enables patients to supplement their basal intrathecal infusion with a programmed on-demand bolus dose. We sought to quantify the change in oral breakthrough opioid need associated with the use of an intrathecal bolus in comparison to those treated with the basal infusion alone. Demographic, dosage, bolus usage and longevity data were extracted from the historical medical record of 69 patients (18/51 bolus/nonbolus) followed continuously at our center. Medication consumption and Pain Disability Index measures were obtained at baseline and most recent follow-up. Among patients with the bolus option, only 2 (11%; confidence interval [CI] 0% to 26%) continued to require oral opiates to manage breakthrough pain compared to 29 (57%; CI 43% to 71%) without the bolus option. The Pain Disability Index score decreased by 19% in patients with the bolus option and by 25% in those with the basal infusion. Total daily intrathecal opioid intake was 34% lower in the group with the bolus device. Utilizing an intrathecal bolus to treat incident pain was a safe way to manage unpredictable breakthrough pain and may represent a cost-saving opportunity by eliminating the need for oral analgesic medications. © 2017 World Institute of Pain.

Hawaii demand-side management resource assessment. Final report, Reference Volume 3 -- Residential and commercial sector DSM analyses: Detailed results from the DBEDT DSM assessment model; Part 1, Technical potential

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-04-01

The Hawaii Demand-Side Management Resource Assessment was the fourth of seven projects in the Hawaii Energy Strategy (HES) program. HES was designed by the Department of Business, Economic Development, and Tourism (DBEDT) to produce an integrated energy strategy for the State of Hawaii. The purpose of Project 4 was to develop a comprehensive assessment of Hawaii`s demand-side management (DSM) resources. To meet this objective, the project was divided into two phases. The first phase included development of a DSM technology database and the identification of Hawaii commercial building characteristics through on-site audits. These Phase 1 products were then used in Phase 2 to identify expected energy impacts from DSM measures in typical residential and commercial buildings in Hawaii. The building energy simulation model DOE-2.1E was utilized to identify the DSM energy impacts. More detailed information on the typical buildings and the DOE-2.1E modeling effort is available in Reference Volume 1, ``Building Prototype Analysis``. In addition to the DOE-2.1E analysis, estimates of residential and commercial sector gas and electric DSM potential for the four counties of Honolulu, Hawaii, Maui, and Kauai through 2014 were forecasted by the new DBEDT DSM Assessment Model. Results from DBEDTs energy forecasting model, ENERGY 2020, were linked with results from DOE-2.1E building energy simulation runs and estimates of DSM measure impacts, costs, lifetime, and anticipated market penetration rates in the DBEDT DSM Model. Through its algorithms, estimates of DSM potential for each forecast year were developed. Using the load shape information from the DOE-2.1E simulation runs, estimates of electric peak demand impacts were developed. Numerous tables and figures illustrating the technical potential for demand-side management are included.

Individual-motivational factors in the acceptability of demand-side and supply-side measures to reduce carbon emissions

International Nuclear Information System (INIS)

Poortinga, Wouter; Spence, Alexa; Demski, Christina; Pidgeon, Nick F.

2012-01-01

As more than a third of all carbon dioxide emissions in the UK are generated by the domestic sector, individuals need to make drastic changes to their current lifestyle in order to play their part in climate change mitigation. Not only do they need to change their personal behaviour, they also have to accept new low-carbon technologies in order to decarbonise the energy they are using. This study uses an adapted version of the Value–Belief-Norm (VBN) model () to examine individual-motivational factors in the acceptability of demand-side and supply-side strategies to reduce carbon emissions. The study found that environmental identity, climate change concern, and personal norms are all significantly associated with the acceptability of both demand-side measures and supply-side technologies. While personal values were also important, their associations were mediated by more specific factors. Overall, the adapted VBN model was better able to explain the acceptability of low-carbon behaviours than of low-carbon energy-supply technologies. Concern about energy security appeared to be of limited importance. It was negatively associated with the willingness to engage in low-carbon behaviours, suggesting that a shift in focus towards energy security issues may not necessarily help a transition to a low-carbon society. - Highlights: ► An adapted VBN model is proposed to study environmentally significant behaviour.► Environmental identity is important for both demand-side and supply-side measures.► Energy security concern is of limited importance to support for supply-side measures.► Energy security concern reduces the willingness to engage in low-carbon behaviours.

Demand side integration aspects in active distribution planning

DEFF Research Database (Denmark)

Silvestro, Federico; Baitch, Alex; Pilo, Fabrizio

2013-01-01

will be implemented in practice? How will regulatory frameworks and connection agreements evolve to support ADSs? The present work provides some information about the closer and closer integration between network planning and Demand Side Integration that is foreseen in the future and shows the necessity to develop...

Emission impacts of demand-side programs: What have we achieved so far and how will recent policy decision change program choices?

International Nuclear Information System (INIS)

Tempchin, R.S.; Van den Berg, A.J.; Geba, V.B.; Felix, C.S.; Goldsmith, M.W.

1990-01-01

Congress and many state legislatures have been discussing the possibility of regulating carbon dioxide (CO 2 ), Sulfur dioxide (SO 2 ), nitrogen oxides (NO x ), chlorofluorocarbons (CFC's) and other emissions. Key to these discussions is the recommendation that energy efficiency, and specifically electric utility demand-side management (DSM) programs, be used as an emission control option. Methods for incorporating the social or external costs of energy production into utility planning are being developed, and estimates of potential emission impacts attributed to DSM programs have been calculated. However, little research has calculated the actual emission impacts from existing DSM programs. The increasing need for electric energy services and fossil fuel generation create an apparent conflict with the risks and regulations associated with global climate change and clean air. Electric utility DSM programs can be used to resolve these conflicts by providing equal or better energy services and a net reduction in emissions. This paper summarizes three separate related research projects. The first study, Impacts of Electric Utility Demand-Side Management Programs on Power Plant Emissions, collects utility and state data on existing DSM programs to approximate the level of SO 2 , NO x , and CO 2 reductions on a regional and national basis. Phase 1 of this study is a completed survey of DSM savings by state. The second and third studies, Carbon Dioxide Reduction Through Electrification of the Industrial and Transportation Sectors, and Carbon Dioxide Reduction Through Electrification of the Residential and Commercial Sectors, compare selected high efficiency electric technologies with fossil-fueled alternatives to determine CO 2 emissions. Through these studies, the authors have begun to quantify the emissions impacts from utility DSM programs and efficient electric equipment

Definitional-mission report: Demand-side management program for the Tenaga Nasional Berhad in Malaysia. Export trade information

Energy Technology Data Exchange (ETDEWEB)

1992-03-01

A definitional mission evaluated the prospects of the US Trade and Development Program (TDP) funding a market demonstration of a Demand Side Management (DSM) program being developed by the Tenaga Nasional Berhad (TNB) in Malaysia. TNB is the national electric utility of Malaysia with the responsibility to promote economically efficient supply of electricity needed for the economic development of Peninsular Malaysia. DSM is a utility-financed program to affect energy savings at the enduse level thereby reducing peak and base loads. Historically, TNB has taken the peak load and the load duration curves as given in planning and implementing the least-cost generation expansion strategy. It has refrained from influencing the pattern of energy use by the customer through any means other than tariff structures and levels. The experience of many utilities with DSM in the U.S. offers TNB an opportunity to develop a suitable DSM program for Malaysia.

Electric Boiler and Heat Pump Thermo-Electrical Models for Demand Side Management Analysis in Low Voltage Grids

DEFF Research Database (Denmark)

Diaz de Cerio Mendaza, Iker; Bak-Jensen, Birgitte; Chen, Zhe

2013-01-01

The last fifteen years many European countries have integrated large percentage of renewable energy on their electricity generation mix. In Denmark the 21.3% of the electricity consumed nowadays is produced by the wind, and it has planned to be the 50% by 2025. In order to front future challenges...... on the power system control and operation, created by this unstable way of generation, Demand Side Management turns to be a promising solution. The storage capacity from thermo-electric units, like electric boilers and heat pumps, allows operating them with certain freedom. Hence they can be employed under...... certain coordination, to actively respond to the power system fluctuations. The following paper presents two simple thermo-electrical models of an electrical boiler and an air-source CO2 heat pump system. The purpose is using them in low voltage grids analysis to assess their capacity and flexibility...

Co-optimization of Energy and Demand-Side Reserves in Day-Ahead Electricity Markets

Science.gov (United States)

Surender Reddy, S.; Abhyankar, A. R.; Bijwe, P. R.

2015-04-01

This paper presents a new multi-objective day-ahead market clearing (DAMC) mechanism with demand-side reserves/demand response (DR) offers, considering realistic voltage-dependent load modeling. The paper proposes objectives such as social welfare maximization (SWM) including demand-side reserves, and load served error (LSE) minimization. In this paper, energy and demand-side reserves are cleared simultaneously through co-optimization process. The paper clearly brings out the unsuitability of conventional SWM for DAMC in the presence of voltage-dependent loads, due to reduction of load served (LS). Under such circumstances multi-objective DAMC with DR offers is essential. Multi-objective Strength Pareto Evolutionary Algorithm 2+ (SPEA 2+) has been used to solve the optimization problem. The effectiveness of the proposed scheme is confirmed with results obtained from IEEE 30 bus system.

Low-enthalpy geothermal resources for electricity production: A demand-side management study for intelligent communities

International Nuclear Information System (INIS)

Xydis, George A.; Nanaki, Evanthia A.; Koroneos, Christopher J.

2013-01-01

The geological conditions in Greece contributed to the creation of important low-enthalpy geothermal energy resources (LEGERs). The resources are divided into low, medium and high enthalpy, or temperature, based on criteria that are generally based on the energy content of the fluid. LEGERs are those sources of the hot water whose temperature is between 25 and 100 °C, which are used for heating residences and in the agricultural or industrial sector. The investigation for the exploitation of low-enthalpy geothermal fluids, which began around 1980, intensified in the last two decades. The low-enthalpy geothermal potential in Greece is rather significant as most of the geothermal fields have been found in regions with favourable developmental conditions, and it seems that they do not present serious environmental or technical exploitation problems. LEGER areas are abundant in Greece, mainly in the eastern and northern part of the country, as well as in many of the Aegean Islands. The aim of this work is to review the options for managing wind load by using low-enthalpy geothermal energy for electricity (through heat pump utilisation) according to the local energy demand. -- Highlights: •Approximately 45.43 GWh per year of electricity can be covered from low-enthalpy geothermal energy resources (LEGERs). •In particular, 10% of the electricity demand can be covered from the LEGER N. Kessani (NK). •The needs for LEGER contribution were increased when wind turbine (WT) production was low. •In winter, where there is abundance of wind, LEGER can be used mostly for heating. •During summer, LEGER can assist more in electricity when heating is not needed

Dynamics of energy-related CO2 emissions in China during 1980-2002: the relative importance of energy supply-side and demand-side effects

International Nuclear Information System (INIS)

Libo Wu; Kaneko, Shinji; Matsuoka, Shunji

2006-01-01

Based on a newly developed model that integrates energy production, transformation and consumption processes, this paper compares the relative importance of some traditionally recognized factors operating on the energy demand side with a body of newly defined factors on the supply side, in terms of their contribution to trends in China's CO 2 emissions related to the total primary energy supply (C-TPES). Before 1996, changes in China's C-TPES were mainly driven by changes on the energy demand side. Factors operating on the energy supply side played trivial roles. During the period 1996-2000, however, increasing demand-side effects declined dramatically and at the same time decreasing effects from supply side expanded significantly. Such changes resulted directly in a decline in the C-TPES. The decreasing effects from international trade as well as statistical imbalances between supply and demand reinforced the declining trend. The shrinkage of demand side effects mainly arose from the slowdown of economic growth and speed of decrease in energy intensity. The expansion of supply-side effects was principally attributed to the speed of decrease in gross unit consumption in transformation sectors, especially in electricity sector. Therefore, the acceleration of efficiency improvements in end-use and transformation sectors accounted for the decline in the C-TPES over the period 1996-2000. (author)

A sustainable development of a city electrical grid via a non-contractual Demand-Side Management

Science.gov (United States)

Samoylenko, Vladislav O.; Pazderin, Andrew V.

2017-06-01

An increasing energy consumption of large cities as well as an extreme high density of city electrical loads leads to the necessity to search for an alternative approaches to city grid development. The ongoing implementation of the energy accounting tariffs with differentiated rates depending upon the market conditions and changing in a short-term perspective, provide the possibility to use it as a financial incentive base of a Demand-Side Management (DSM). Modern hi-technology energy metering and accounting systems with a large number of functions and consumer feedback are supposed to be the good means of DSM. Existing systems of Smart Metering (SM) billing usually provide general information about consumption curve, bills and compared data, but not the advanced statistics about the correspondence of financial and electric parameters. Also, consumer feedback is usually not fully used. So, the efforts to combine the market principle, Smart Metering and a consumer feedback for an active non-contractual load control are essential. The paper presents the rating-based multi-purpose system of mathematical statistics and algorithms of DSM efficiency estimation useful for both the consumers and the energy companies. The estimation is performed by SM Data processing systems. The system is aimed for load peak shaving and load curve smoothing. It is focused primarily on a retail market support. The system contributes to the energy efficiency and a distribution process improvement by the manual management or by the automated Smart Appliances interaction.

Game Demands of Seven-A-Side Soccer in Young Players.

Science.gov (United States)

Barbero-Alvarez, José C; Gómez-López, Maite; Castagna, Carlo; Barbero-Alvarez, Verónica; Romero, David V; Blanchfield, Anthony W; Nakamura, Fábio Y

2017-07-01

Barbero-Alvarez, JC, Gómez-López, M, Castagna, C, Barbero-Alvarez, V, Romero, DV, Blanchfield, AW, and Nakamura, FY. Game demands of seven-a-side soccer in young players. J Strength Cond Res 31(7): 1771-1779, 2017-The aim of this study was to examine the activity patterns and physiological demands of 7-a-side youth soccer matches across 2 chronological age categories (U12 and U14). Twenty-two soccer players of a national youth soccer academy were investigated. Players of each age category performed 2 training matches (2 × 25 minutes) and were monitored by global positioning system and heart rate monitor units. Players of both categories covered similar total distance (5,348 ± 307 m), at similar mean heart rate values (86 ± 4% of maximum). However, the number of high-intensity runs (82.5 ± 17.4 vs. 69.7 ± 15.2) and total distance covered during sprints (264 ± 207 vs. 128 ± 74 m) were significantly (p ≤ 0.05) higher in U14 compared with U12. The results suggest a highly demanding nature of 7-a-side soccer for skilled players, with physical maturity possibly influencing the match-related high-intensity performance at these ages.

Intelligent Demand Side Management within production systems. Towards Industrial Smart Grids; Intelligente Lastverschiebung in der Produktionstechnik. Ein Weg zum Industrial Smart Grid

Energy Technology Data Exchange (ETDEWEB)

Schriegel, Sebastian; Pethig, Florian; Jasperneite, Juergen [Fraunhofer-Anwendungszentrum Industrial Automation (IOSB-INA), Lemgo (Germany)

2012-07-01

Demand Side Management is a key technology of smart grids. Consumers adjust their energy consumption at current time-volatile energy generation capacity. The currently used energy consumption optimizations, such as the use of energy efficient actuators, pause functions and peak load management should be supplemented by a dynamic real-time energy management. For industrial consumers, such an energy management may be established at various levels of the automation pyramid. On plant level energy optimization is based on predictions, on control and field level optimization is based on process variables. The taxonomy of potential energy optimization differentiates between organizational, synchronization and single parameter optimization. This potential can be exploited with intelligent control technology based on qualified process models and tunable control programs. An Industrial Smart Grid results by interlinking the former mentioned intelligent control technologies with the plant infrastructure and thereby provides an optimal energy consumption behavior and a perfect integration into and interaction with the smart grid. (orig.)

Impact of Demand Side Response on a Commercial Retail Refrigeration System

Directory of Open Access Journals (Sweden)

Ibrahim M. Saleh

2018-02-01

Full Text Available The UK National Grid has placed increased emphasis on the development of Demand Side Response (DSR tariff mechanisms to manage load at peak times. Refrigeration systems, along with HVAC, are estimated to consume 14% of the UK’s electricity and could have a significant role for DSR application. However, characterized by relatively low individual electrical loads and massive asset numbers, multiple low power refrigerators need aggregation for inclusion in these tariffs. In this paper, the impact of the Demand Side Response (DSR control mechanisms on food retailing refrigeration systems is investigated. The experiments are conducted in a test-rig built to resemble a typical small supermarket store. The paper demonstrates how the temperature and pressure profiles of the system, the active power and the drawn current of the compressors are affected following a rapid shut down and subsequent return to normal operation as a response to a DSR event. Moreover, risks and challenges associated with primary and secondary Firm Frequency Response (FFR mechanisms, where the load is rapidly shed at high speed in response to changes in grid frequency, is considered. For instance, measurements are included that show a significant increase in peak inrush currents of approx. 30% when the system returns to normal operation at the end of a DSR event. Consideration of how high inrush currents after a DSR event can produce voltage fluctuations of the supply and we assess risks to the local power supply system.

Free energy option and its relevance to improve domestic energy demands in southern Nigeria

Directory of Open Access Journals (Sweden)

Moses Eterigho Emetere

2016-11-01

Full Text Available The aim of this paper is to seek an energy option that would benefit the growing energy demands. Domestic energy demands in southern Nigeria had increased greatly due to failing power programs and seasonal migrations. The fossil fuel option is gradually fading away due to environmental pollution and recent dynamic cost. The renewable energy option had been celebrated with little success in the coastal area of southern Nigeria. At the moment, the renewable energy option is very expensive with little guarantee on its efficiency with time. The data set used for this study was obtained from the Davis weather installation in Covenant University. The free energy option was considered. The cost and its environmental implication for domestic use were comparatively discussed alongside other energy options — using the Life cycle cost analysis. It was found out that free energy option is more affordable and efficient for domestic use.

A semi-distributed electric demand-side management system with PV generation for self-consumption enhancement

International Nuclear Information System (INIS)

Castillo-Cagigal, M.; Gutierrez, A.; Monasterio-Huelin, F.; Caamano-Martin, E.; Masa, D.; Jimenez-Leube, J.

2011-01-01

Highlights: → We have developed a DSM system with PV electricity and battery storage. → To implement the DSM system, we have developed a modular architecture. → Simulations and real experiments have been executed for different weather conditions. → The use of theses technologies increase the self-consumed energy. -- Abstract: This paper presents the operation of an Electrical Demand-Side Management (EDSM) system in a real solar house. The use of EDSM is one of the most important action lines to improve the grid electrical efficiency. The combination between the EDSM and the PV generation performs a new control level in the local electric behavior and allows new energy possibilities. The solar house used as test-bed for the EDSM system owns a PV generator, a lead-acid battery storage system and a grid connection. The electrical appliances are controllable from an embedded computer. The EDSM is implemented by a control system which schedules the tasks commanded by the user. By using the control system, we define the house energy policy and improve the energy behavior with regard to a selected energy criterion, self-consumption. The EDSM system favors self-consumption with regard to a standard user behavior and reduces the energy load from the grid.

An analysis of the factors influencing demand-side management activity in the electric utility industry

Science.gov (United States)

Bock, Mark Joseph

Demand-side management (DSM), defined as the "planning, implementation, and monitoring of utility activities designed to encourage consumers to modify their pattern of electricity usage, including the timing and level of electricity demand," is a relatively new concept in the U.S. electric power industry. Nevertheless, in twenty years since it was first introduced, utility expenditures on DSM programs, as well as the number of such programs, have grown rapidly. At first glance, it may seem peculiar that a firm would actively attempt to reduce demand for its primary product. There are two primary explanations as to why a utility might pursue DSM: regulatory mandate, and self-interest. The purpose of this dissertation is to determine the impact these influences have on the amount of DSM undertaken by utilities. This research is important for two reasons. First, it provides insight into whether DSM will continue to exist as competition becomes more prevalent in the industry. Secondly, it is important because no one has taken a comprehensive look at firm-level DSM activity on an industry-wide basis. The primary data set used in this dissertation is the U.S. Department of Energy's Annual Electric Utility Report, Form EIA-861, which represents the most comprehensive data set available for analyzing DSM activity in the U.S. There are four measures of DSM activity in this data set: (1) utility expenditures on DSM programs; (2) energy savings by DSM program participants; and (3) the actual and (4) the potential reductions in peak load resulting from utility DSM measures. Each is used as the dependent variable in an econometric analysis where independent variables include various utility characteristics, regulatory characteristics, and service territory and customer characteristics. In general, the results from the econometric analysis suggest that in 1993, DSM activity was primarily the result of regulatory pressure. All of the evidence suggests that if DSM continues to

Joint Planning Of Energy Storage and Transmission Considering Wind-Storage Combined System and Demand Side Response

Science.gov (United States)

Huang, Y.; Liu, B. Z.; Wang, K. Y.; Ai, X.

2017-12-01

In response to the new requirements of the operation mode of wind-storage combined system and demand side response for transmission network planning, this paper presents a joint planning of energy storage and transmission considering wind-storage combined system and demand side response. Firstly, the charge-discharge strategy of energy storage system equipped at the outlet of wind farm and demand side response strategy are analysed to achieve the best comprehensive benefits through the coordination of the two. Secondly, in the general transmission network planning model with wind power, both energy storage cost and demand side response cost are added to the objective function. Not only energy storage operation constraints and but also demand side response constraints are introduced into the constraint condition. Based on the classical formulation of TEP, a new formulation is developed considering the simultaneous addition of the charge-discharge strategy of energy storage system equipped at the outlet of the wind farm and demand side response strategy, which belongs to a typical mixed integer linear programming model that can be solved by mature optimization software. The case study based on the Garver-6 bus system shows that the validity of the proposed model is verified by comparison with general transmission network planning model. Furthermore, the results demonstrate that the joint planning model can gain more economic benefits through setting up different cases.

Methodology for the analysis and characterization of the demand side energy resources; Metodologia para analise e caracterizacao dos recursos energeticos do lado da demanda

Energy Technology Data Exchange (ETDEWEB)

Baitelo, Ricardo Lacerda; Udaeta, Miguel Edgar Morales [Universidade de Sao Paulo (USP), SP (Brazil). Dept. de Energia e Automacao Eletricas. Grupo de Energia; Burani, Geraldo Francisco; Grimoni, Jose Aquiles Baesso [Universidade de Sao Paulo (USP), SP (Brazil). Inst. de Energia e Eletrotecnica

2006-07-01

This abstract aims at describing briefly a model for the assessment of demand side energy resources This model intends to comprehend every kind of action and measure related to demand side management and energy conservation, evaluating them in a holistic way, into four dimensions: technical-economical, environmental, social and political. Different aspects regarding the resources are also accounted, such as energetic potentials (theoretical, accomplishable and economic). At last, scenarios concerning the introduction of evaluated resources through a period of time are elaborated. (author)

Economic and environmental impacts from the implementation of an intelligent demand side management system at the European level

International Nuclear Information System (INIS)

Papagiannis, G.; Dagoumas, A.; Lettas, N.; Dokopoulos, P.

2008-01-01

This paper presents the results of an analysis on the economic and environmental impacts of the application of an intelligent demand side management system, called the Energy Consumption Management System (ECMS), in the European countries. The ECMS can be applied for the control of individual, widely distributed electric loads, using the power distribution network as the command communication channel. The system can be applied in public lighting, in the tertiary and residential sectors, as well as in the industry. A top-down analysis investigates the possible penetration levels in each application area. The long-term impacts following the application of system are evaluated using the LEAP2006 platform. The WASP IV model is also used for the optimization of the power generation expansion and the corresponding calibration of LEAP2006. Several operational strategies combining variable market penetration of the ECMS and expected energy savings are examined. Results show that, under a logical market penetration, a reduction of 1-4% in primary energy, of 1.5-5% in CO 2 emissions and a 2-8% saving in investment costs for power generation expansion is to be expected for the EU-15. The results also justify that innovative devices may be attractive to end users and also help in the implementation of global energy-saving policies

Demand side resource operation on the Irish power system with high wind power penetration

DEFF Research Database (Denmark)

Keane, A.; Tuohy, A.; Meibom, Peter

2011-01-01

part of the power system plant mix and contribute to the flexible operation of a power system. A model for demand side resources is proposed here that captures its key characteristics for commitment and dispatch calculations. The model is tested on the all island Irish power system, and the operation...... of the functions of conventional peaking plant. Demand side resources are also shown to be capable of improving the reliability of the system, with reserve capability identified as a key requirement in this respect....... of the model is simulated over one year in both a stochastic and deterministic mode, to illustrate the impact of wind and load uncertainty. The results illustrate that demand side resources can contribute to the efficient, flexible operation of systems with high penetrations of wind by replacing some...

How to introduce demand side resources in the design of low-carbon power systems in China

Science.gov (United States)

Zhou, Pengcheng; Liu, Yiqun; Zeng, Ming; Sun, Chenjun

2018-04-01

Nowadays, China's energy demand sustained rapid growth, and the coal-based energy structure has adverse effects on the environment. The flexibility of demand side resource (DSR) will be greatly improved, and DSR can reduce electricity consumption actively and temporarily, and realize energy saving and emission reduction. But there are still some problems to introduce DSR in China. This paper proposes three practices for introducing demand side resources to improve the flexibility of power systems through demand resources.

Ketamine for Pain Management-Side Effects & Potential Adverse Events.

Science.gov (United States)

Allen, Cheryl A; Ivester, Julius R

2017-12-01

An old anesthetic agent, ketamine is finding new use in lower doses for analgesic purposes. There are concerns stemming from its potential side effects-specifically psychomimetic effects. These side effects are directly related to dose amount. The doses used for analgesic purposes are much lower than those used for anesthesia purposes. A literature review was performed to ascertain potential side effects and/or adverse events when using ketamine for analgesia purposes. The search included CINAHL, PubMed, and Ovid using the search terms "ketamine," "ketamine infusion," "pain," "adverse events," "practice guideline," and "randomized controlled trial." Searches were limited to full-text, peer-reviewed articles and systematic reviews. Initially 1,068 articles were retrieved. The search was then narrowed by using the Boolean connector AND with various search term combinations. After adjusting for duplication, article titles and abstracts were reviewed, leaving 25 articles for an in-depth analysis. Specific exclusion criteria were then applied. The literature supports the use of ketamine for analgesic purposes, and ketamine offers a nonopioid option for the management of some pain conditions. Because ketamine is still classified as an anesthetic agent, health care institutions should develop their own set of policies and protocols for the administration of ketamine. By using forethought and understanding of the properties of ketamine, appropriate care may be planned to mitigate potential side effects and adverse events so that patients are appropriately cared for and their pain effectively managed. Copyright © 2017 American Society for Pain Management Nursing. Published by Elsevier Inc. All rights reserved.

Mining residential water and electricity demand data in Southern California to inform demand management strategies

Science.gov (United States)

Cominola, A.; Spang, E. S.; Giuliani, M.; Castelletti, A.; Loge, F. J.; Lund, J. R.

2016-12-01

Demand side management strategies are key to meet future water and energy demands in urban contexts, promote water and energy efficiency in the residential sector, provide customized services and communications to consumers, and reduce utilities' costs. Smart metering technologies allow gathering high temporal and spatial resolution water and energy consumption data and support the development of data-driven models of consumers' behavior. Modelling and predicting resource consumption behavior is essential to inform demand management. Yet, analyzing big, smart metered, databases requires proper data mining and modelling techniques, in order to extract useful information supporting decision makers to spot end uses towards which water and energy efficiency or conservation efforts should be prioritized. In this study, we consider the following research questions: (i) how is it possible to extract representative consumers' personalities out of big smart metered water and energy data? (ii) are residential water and energy consumption profiles interconnected? (iii) Can we design customized water and energy demand management strategies based on the knowledge of water- energy demand profiles and other user-specific psychographic information? To address the above research questions, we contribute a data-driven approach to identify and model routines in water and energy consumers' behavior. We propose a novel customer segmentation procedure based on data-mining techniques. Our procedure consists of three steps: (i) extraction of typical water-energy consumption profiles for each household, (ii) profiles clustering based on their similarity, and (iii) evaluation of the influence of candidate explanatory variables on the identified clusters. The approach is tested onto a dataset of smart metered water and energy consumption data from over 1000 households in South California. Our methodology allows identifying heterogeneous groups of consumers from the studied sample, as well as

The long term challenges of energy management: keeping all options open

International Nuclear Information System (INIS)

Moisan, F.

2003-01-01

Before the end of the 21. century, the global energy sector will need to face up to two challenges: climate warming due to greenhouse gas emissions and the increasing scarcity of traditional hydrocarbons. The likely scenarios expected by 2030 demonstrate that we are in the process of witnessing strong growth in the consumption of energy and in CO 2 emissions while at the same time climate experts warn us that we need to achieve a 75 % reduction of emissions in the industrialized nations by 2050. Several technological options may be envisaged in order to meet these challenges including a view generation nuclear power, renewable energy, the storage of carbon dioxide or managing energy consumption, and we need to keep all options open because none of these alone can solve all the problems. The time required for technologies to emerge following research and their penetration into the marketplace can often be several decades. The 2050 deadline is therefore not so at away and we need to stem and reverse the growth in demand from today onwards, something we should da without any misgivings when we consider the considerable uncertainties surrounding supply-side technologies. This profound transformation of our production and consumption methods also involves a change in our lifestyle and our behaviour: our efforts in the field of technological development must be accompanied by a commitment by all citizens to creating a more rational society where energy is concerned. (author)

An Algorithmic Game Approach for Demand Side Management in Smart Grid with Distributed Renewable Power Generation and Storage

Directory of Open Access Journals (Sweden)

Ren-Shiou Liu

2016-08-01

Full Text Available In this paper, the problem of minimizing electricity cost and the peak system load in smart grids with distributed renewable energy resources is studied. Unlike prior research works that either assume all of the jobs are interruptible or power-shiftable, this paper focuses on more challenging scenarios in which jobs are non-interruptible and non-power-shiftable. In addition, as more and more newly-built homes have rooftop solar arrays, it is assumed that all users are equipped with a solar-plus-battery system in this paper. Thus, power can be drawn from the battery as needed to reduce the cost of electricity or to lower the overall system load. With a quadratic load-dependent cost function, this paper first shows that the electricity cost minimization problem in such a setting is NP-hard and presents a distributed demand-side management algorithm, called DDSM, to solve this. Experimental results show that the proposed DDSM algorithm is effective, scalable and converges to a Nash equilibrium in finite rounds.

Model Predictive Controller for Active Demand Side Management with PV Self-consumption in an Intelligent Building

DEFF Research Database (Denmark)

Zong, Yi; Mihet-Popa, Lucian; Kullmann, Daniel

2012-01-01

This paper presents a Model Predictive Controller (MPC) for electrical heaters’ predictive power consumption including maximizing the use of local generation (e.g. solar power) in an intelligent building. The MPC is based on dynamic power price and weather forecast, considering users’ comfort...... settings to meet an optimization objective such as minimum cost and minimum reference temperature error. It demonstrates that this MPC strategy can realize load shifting, and maximize the PV self-consumption in the residential sector. With this demand side control study, it is expected that MPC strategy...

An integrated approach to energy supply and demand: The role of nuclear energy in Southern Africa

Energy Technology Data Exchange (ETDEWEB)

Neethling, D C; Bredell, J H; Basson, J A [National Energy Council, Lynnwood Ridge (South Africa)

1990-06-01

The importance of an integrated approach to the development of an electricity strategy for Southern Africa is emphasized in view of the numerous options and initiatives that are available for supply and demand side management. Apart from present uncertainties concerning future electricity demand, other factors such as the availability of coal and uranium and the comparative costs of nuclear and coal-based electricity are regarded as the most important parameters which have as yet not been sufficiently quantified to decide on the timing and extent of nuclear energy in Southern Africa. (author)

An integrated approach to energy supply and demand: The role of nuclear energy in Southern Africa

International Nuclear Information System (INIS)

Neethling, D.C.; Bredell, J.H.; Basson, J.A.

1990-01-01

The importance of an integrated approach to the development of an electricity strategy for Southern Africa is emphasized in view of the numerous options and initiatives that are available for supply and demand side management. Apart from present uncertainties concerning future electricity demand, other factors such as the availability of coal and uranium and the comparative costs of nuclear and coal-based electricity are regarded as the most important parameters which have as yet not been sufficiently quantified to decide on the timing and extent of nuclear energy in Southern Africa. (author)

An Auto Tuning Substation Peak Shaving Controller for Congestion Management Using Flexible Demand

DEFF Research Database (Denmark)

Sossan, Fabrizio; Marinelli, Mattia

2013-01-01

A closed loop substation peak shaving/congestion management controller for radial distribution networks is presented. The controller it uses an individual control signal in order to shift the consumption of a population of demand side resources, DSRs. The controller auto tunes its parameters on...

Utilizing a programmatic focus on energy efficiency and customer feedback to improve the effectiveness of demand side management

International Nuclear Information System (INIS)

Smith, S.; Tharp, A.

2006-01-01

A project to encourage effective demand side management (DSM) programs through price-responsive load management was presented. The project was conducted through literature searches, surveys of utility programs and interviews with experts. National security, environmental awareness and economic factors were identified as the primary drivers for DSM. A overview of DSM strategies included details of: price responsive programs; power buyback; direct load control; and conservation-based rebates. Target sectors for DSM programs were divided into 4 sectors: (1) residential; (2) agricultural; (3) commercial/industrial; and (4) institutional. A customer decision cycle for DSM was presented, and various programs were evaluated. A comparison between DR and energy efficiency programs in the United States suggested that an increased focus on energy efficiency will benefit DR programs. However, perception of risk due to pricing exposure and the potential for loss of comfort are significant barriers to effective DSM. Studies have shown that DSM is most effective when participants receive direct feedback on consumption. Simple mechanisms for alerting participants of peak periods were recommended, as well as disaggregation tools to highlight areas of high energy usage and spotlight corrective measures. National and regional coordination of DSM activities was also recommended. It was concluded that DSM programs are successful when both customers and suppliers have an equal stake in their success. refs., tabs., figs

On the importance of the supply side in demand-side management

International Nuclear Information System (INIS)

Fischer, Carolyn

2005-01-01

We discuss how the structure of market supply affects the evaluation of policies to promote energy efficiency in household appliances. If competitive markets offer the levels that consumers demand, product standards inefficiently restrict choice. If suppliers price discriminate, minimum standards can restrict the inefficient use of energy intensity to segment consumers. We also compare the effects of average intensity standards, energy prices and innovation, and consider what the different behavioral predictions imply for empirical studies of energy efficiency. Good policymaking requires knowing not only how consumers value energy efficiency in their decision-making, but also how producers respond to those values

On the importance of the supply side in demand-side management

International Nuclear Information System (INIS)

Fischer, C.

2005-01-01

We discuss how the structure of market supply affects the evaluation of policies to promote energy efficiency in household appliances. If competitive markets offer the levels that consumers demand, product standards inefficiently restrict choice. If suppliers price discriminate, minimum standards can restrict the inefficient use of energy intensity to segment consumers. We also compare the effects of average intensity standards, energy prices and innovation, and consider what the different behavioral predictions imply for empirical studies of energy efficiency. Good policy making requires knowing not only how consumers value energy efficiency in their decision-making, but also how producers respond to those values. (author)

Market architecture and power demand management

International Nuclear Information System (INIS)

Rious, Vincent; Roques, Fabien

2014-12-01

Demand response is a cornerstone problem in electricity markets considering climate change constraint. Most liberalized electricity markets have a poor track record at developing demand response. In Europe, different models are considered for demand response, from a development under a regulated regime to a development under competitive perspectives. In this paper, focusing on demand response for mid-size and small consumers, we investigate which types of market signals should be sent to demand response aggregators to see demand response emerge as a competitive activity. Using data from the French power system over eight years, we compare the possible market design options to allow demand response to develop. Our simulations demonstrate that with the current market rules, demand response is not a profitable activity in the French electricity industry. Introducing a capacity remuneration could bring additional revenues to demand response aggregators if the power system has no over-capacity

Water demand management in Mediterranean regions

OpenAIRE

Giulio Querini; Salvo Creaco

2005-01-01

Water sustainability needs a balance between demand and availability: 1) Water demand management: demand may be managed by suppliers and regulations responsible persons, using measures like invoicing, consumptions measurement and users education in water conservation measures; 2) Augmentation of water supply: availibility may be augmented by infrastructural measures, waste water reuse, non-conventional resources and losses reduction. Water Demand Management is about achieving a reduction in t...

Demand side management in South Africa at industrial residence water heating systems using in line water heating methodology

International Nuclear Information System (INIS)

Rankin, R.; Rousseau, P.G.

2008-01-01

The South African electrical utility, ESKOM, currently focuses its demand side management (DSM) initiatives on controlling electrical load between 18:00 and 20:00 each day, which is the utility's peak demand period. Funding is provided to energy service companies (ESCo's) to implement projects that can achieve load shifting out of this period. This paper describes how an improved in line water heating concept developed in previous studies was implemented into several real life industrial sanitary water heating systems to obtain the DSM load shift required by ESKOM. Measurements from a selection of these plants are provided to illustrate the significant load reductions that are being achieved during 18:00-20:00. The measured results also show that the peak load reduction is achieved without adversely affecting the availability of sufficient hot water to the persons using the showering and washing facilities served by the water heating system. A very good correlation also exists between these measured results and simulations that were done beforehand to predict the DSM potential of the project. The in line water heater concept provides an improved solution for DSM at sanitary water heating systems due to the stratified manner in which hot water is supplied to the tanks. This provides an improved hot water supply to users when compared to conventional in tank heating systems, even with load shifting being done. It also improves the storage efficiency of a plant, thereby allowing the available storage capacity of a plant to be utilized to its full extent for load shifting purposes

Institutional barriers to DSM (demand side management): Reviewing the regulatory bargain

Energy Technology Data Exchange (ETDEWEB)

Warwick, W.M.

1990-09-01

The paper discusses traditional arguments for utility regulation in the context of the current utility environment. It reviews several DSM delivery options using a matrix of key financial considerations for utilities and consumers. The strengths and weaknesses of each option are discussed and an assessment of current prospects for DSM implementation is provided. The premise of the paper is that adoption of DSM by utilities and consumers has lagged because of technical and behavioral uncertainties. In addition, regulatory practices and DSM delivery mechanisms have not provided adequate means to extract the benefits of DSM and allocate the risks in a way that offers clear advantages over generating options. The paper concludes with a brief discussion of the potential for value of service approaches to resolve these problems.

Survey of Models on Demand, Customer Base-Line and Demand Response and Their Relationships in the Power Market

OpenAIRE

Heshmati, Almas

2012-01-01

The increasing use of demand-side management as a tool to reliably meet electricity demand at peak time has stimulated interest among researchers, consumers and producer organizations, managers, regulators and policymakers, This research reviews the growing literature on models used to study demand, consumer baseline (CBL) and demand response in the electricity market. After characterizing the general demand models, it reviews consumer baseline based on which further study the demand response...

A Simulation of Rainwater Harvesting Design and Demand-Side Controls for Large Hospitals

Directory of Open Access Journals (Sweden)

Lawrence V. Fulton

2018-05-01

Full Text Available Inpatient health buildings in the United States are the most intensive users of water among large commercial buildings. Large facilities (greater than 1 million square feet consume an average of 90 million gallons per building per year. The distribution and treatment of water imposes a significant electrical power demand, which may be the single largest energy requirement for various states. Supply and demand-side solutions are needed, particularly in arid and semi-arid regions where water is scarce. This study uses continuous simulations based on 71 years of historical data to estimate how rainwater harvesting systems and demand-side interventions (e.g., low-flow devices, xeriscaping would offset the demand for externally-provided water sources in a semi-arid region. Simulations from time series models are used to generate alternative rainfall models to account for potential non-stationarity and volatility. Results demonstrate that hospital external water consumption might be reduced by approximately 25% using conservative assumptions and depending on the design of experiment parameters associated with rainfall capture area, building size, holding tank specifications, and conservation efforts.

Demand side management—A simulation of household behavior under variable prices

International Nuclear Information System (INIS)

Gottwalt, Sebastian; Ketter, Wolfgang; Block, Carsten; Collins, John; Weinhardt, Christof

2011-01-01

Within the next years, consumer households will be increasingly equipped with smart metering and intelligent appliances. These technologies are the basis for households to better monitor electricity consumption and to actively control loads in private homes. Demand side management (DSM) can be adopted to private households. We present a simulation model that generates household load profiles under flat tariffs and simulates changes in these profiles when households are equipped with smart appliances and face time-based electricity prices. We investigate the impact of smart appliances and variable prices on electricity bills of a household. We show that for households the savings from equipping them with smart appliances are moderate compared to the required investment. This finding is quite robust with respect to variation of tariff price spreads and to different types of appliance utilization patterns. Finally, our results indicate that electric utilities may face new demand peaks when day-ahead hourly prices are applied. However, a considerable amount of residential load is available for shifting, which is interesting for the utilities to balance demand and supply. - Highlights: ► Our model generates residential load profiles that are based on real world data. ► We simulate changes in load profiles when smart appliances and time-of-use tariffs are applied. ► The economic incentive for households to invest in smart appliances is low. ► Time-of-use tariffs create new, even higher peaks. ► Electric utilities have a large amount of the hourly load available for shifting.

An Efficient Demand Side Management System with a New Optimized Home Energy Management Controller in Smart Grid

Directory of Open Access Journals (Sweden)

Hafiz Majid Hussain

2018-01-01

Full Text Available The traditional power grid is inadequate to overcome modern day challenges. As the modern era demands the traditional power grid to be more reliable, resilient, and cost-effective, the concept of smart grid evolves and various methods have been developed to overcome these demands which make the smart grid superior over the traditional power grid. One of the essential components of the smart grid, home energy management system (HEMS enhances the energy efficiency of electricity infrastructure in a residential area. In this aspect, we propose an efficient home energy management controller (EHEMC based on genetic harmony search algorithm (GHSA to reduce electricity expense, peak to average ratio (PAR, and maximize user comfort. We consider EHEMC for a single home and multiple homes with real-time electricity pricing (RTEP and critical peak pricing (CPP tariffs. In particular, for multiple homes, we classify modes of operation for the appliances according to their energy consumption with varying operation time slots. The constrained optimization problem is solved using heuristic algorithms: wind-driven optimization (WDO, harmony search algorithm (HSA, genetic algorithm (GA, and proposed algorithm GHSA. The proposed algorithm GHSA shows higher search efficiency and dynamic capability to attain optimal solutions as compared to existing algorithms. Simulation results also show that the proposed algorithm GHSA outperforms the existing algorithms in terms of reduction in electricity cost, PAR, and maximize user comfort.

Grey-box Modelling of a Household Refrigeration Unit Using Time Series Data in Application to Demand Side Management

DEFF Research Database (Denmark)

Sossan, Fabrizio; Lakshmanan, Venkatachalam; Costanzo, Giuseppe Tommaso

2016-01-01

This paper describes the application of stochastic grey-box modeling to identify electrical power consumption-to-temperature models of a domestic freezer using experimental measurements. The models are formulated using stochastic differential equations (SDEs), estimated by maximum likelihood......) to shift the electricity consumption of a freezer in demand response experiments, thereby addressing the model selection problem also from the application point of view and showing in an experimental context the ability of MPC to exploit the freezer as a demand side resource (DSR)....... estimation (MLE), validated through the model residuals analysis and cross-validated to detect model over-fitting. A nonlinear model based on the reversed Carnot cycle is also presented and included in the modeling performance analysis. As an application of the models, we apply model predictive control (MPC...

Low-Carbon Warehousing: Examining Impacts of Building and Intra-Logistics Design Options on Energy Demand and the CO2 Emissions of Logistics Centers

Directory of Open Access Journals (Sweden)

Julia Freis

2016-05-01

Full Text Available Logistics centers contribute to CO2 emissions in the building and logistics sector and therefore share a responsibility to decarbonize not only the supply chain. Synergy effects in both building and intra-logistics should be considered as suitable levers to lower energy demand and related CO2 emissions. This research develops firs t with a systemic approach an integrated analytical model for energy calculation and reference building models for different types of logistics centers to provide basic knowledge and a methodological framework for planners and managers to aid in the selection of different intra-logistics and building design options for optimum energy efficiency. It then determines the energy demand in reference building models and performs parameter studies to examine interrelations and impacts of design options for intra-logistics, building technology, and building skin on energy demand. It combines these to optimized reference building models to show the extent to which energy and CO2 emission savings can be reached. The results show that it is possible to significantly lower CO2 emissions. However, there are clear differences between the different types of logistics centers and the impacts of different design options.

Mixed waste management options

International Nuclear Information System (INIS)

Owens, C.B.; Kirner, N.P.

1992-01-01

Currently, limited storage and treatment capacity exists for commercial mixed waste streams. No commercial mixed waste disposal is available, and it has been estimated that if and when commercial mixed waste disposal becomes available, the costs will be high. If high disposal fees are imposed, generators may be willing to apply extraordinary treatment or regulatory approaches to properly dispose of their mixed waste. This paper explores the feasibility of several waste management scenarios and management options. Existing data on commercially generated mixed waste streams are used to identify the realm of mixed waste known to be generated. Each waste stream is evaluated from both a regulatory and technical perspective in order to convert the waste into a strictly low-level radioactive or a hazardous waste. Alternative regulatory approaches evaluated in this paper include a delisting petition) no migration petition) and a treatability variance. For each waste stream, potentially available treatment options are identified that could lead to these variances. Waste minimization methodology and storage for decay are also considered. Economic feasibility of each option is discussed broadly. Another option for mixed waste management that is being explored is the feasibility of Department of Energy (DOE) accepting commercial mixed waste for treatment, storage, and disposal. A study has been completed that analyzes DOE treatment capacity in comparison with commercial mixed waste streams. (author)

43 CFR 30.268 - May I demand a hearing regarding the tribal purchase option decision?

Science.gov (United States)

2010-10-01

... tribal purchase option decision? 30.268 Section 30.268 Public Lands: Interior Office of the Secretary of the Interior INDIAN PROBATE HEARINGS PROCEDURES Tribal Purchase of Interests Under Special Statutes § 30.268 May I demand a hearing regarding the tribal purchase option decision? Yes. You may file with...

THE TECHNOLOGY ASSESSMENT OF DEMAND SIDE BIDDING IN THE SOUTH AFRICAN CONTEXT*

Directory of Open Access Journals (Sweden)

H.K. Grover

2012-01-01

Full Text Available

ENGLISH ABSTRACT:South Africa is currently in the grip of a severe power supply capacity constraint. January 2007 saw blackouts throughout the country, and worse was expected in the months to come. As a measure of immediate remedy Eskom has turned to demand side bidding (DSB, a methodology whereby the demand side has an opportunity to sell back flexible load to the supply side. This paper assesses DSB with the aim of evaluating and gauging the current and potential future standing of DSB as a technology product within the South African context.

AFRIKAANSE OPSOMMING: Suid-Afrika ervaar tans ’n ernstige vraagstuk in elektrisiteitsvoorsiening. Vanaf Januarie 2007 kom gereelde kragonderbrekings voor, en volgens alle aanduidings lê die ergste nog voor. As ’n korttermynmaatreël beoog ESKOM ’n strategie van aanvraagbestuur en spesifiek aanvraag-bie, ’n metodologie waarvolgens verbruikers die geleentheid kry om elektrisiteit aan die verskaffer terug te verkoop. Hierdie artikel assesseer die metodologie ten einde die huidige en toekomstige gebruikersmoontlikhede daarvan as ’n tegnologieproduk binne Suid-Afrikaanse konteks te bepaal.

Research on Simulation Requirements and Business Architecture of Automated Demand Response in Power Sales Side Market Liberalization

Science.gov (United States)

Liu, Yiqun; Zhou, Pengcheng; Zeng, Ming; Chen, Songsong

2018-01-01

With the gradual reform of the electricity market, the power sale side liberalization has become the focus of attention as the key task of reform. The open power market provides a good environment for DR (Demand Response). It is of great significance to research the simulation requirements and business architecture of ADR (Automatic Demand Response) in power sale side market liberalization. Firstly, this paper analyzes the simulation requirements of ADR. Secondly, it analyzes the influence factors that the business development of ADR from five aspects after power sale side market liberalization. Finally, Based on ADR technology support system, the business architecture of ADR after power sale side market liberalization is constructed.

Demand Side Management in a competitive European market: Who should be responsible for its implementation?

International Nuclear Information System (INIS)

Didden, Marcel H.; D'Haeseleer, William D.

2003-01-01

Demand side management (DSM), more specifically energy efficiency, is standing in the spotlight due to the Kyoto commitments. An additional factor, the liberalization of the electricity markets, causes every country to review its own DSM activities. Especially in Europe, where the directive for opening the electricity market has a direct impact on the current DSM frameworks, governments will have to consider a change in this framework. In order to achieve this, much research has been done in the past years on how to change the DSM framework in a way that the requirements of both liberalization and the Kyoto Protocol will be met. In this paper, we review the current DSM activities and ongoing research from the starting point 'who should be responsible for implementing DSM'. We conclude that countries have to make explicit choices on how to arrange their DSM activities for the different customers groups. They have to be aware of the fact that some combinations of DSM activities will lead to counter-productive results and therefore inefficiency. This paper also investigates which of these DSM activities fits best in the open market; a critical review of Integrated Resource Planning (IRP) is used as a starting point. We agree with various proponents of IRP that planning towards minimal societal costs is theoretically appropriate, looking from a societal point of view. We also indicate in this paper that the planning process IRP is partly applicable in the open market. But looking at the practical application of IRP in the past, we must conclude that there are better alternatives for achieving energy efficient goals in a liberalized market

The Demand Side Response to Multi-zone Tariffs. Consumer Test Results

Directory of Open Access Journals (Sweden)

Adam Olszewski

2015-12-01

Full Text Available Advanced Metering Infrastructure (AMI is a technologically advanced solution currently implemented by the most innovative distribution system operators. ENERGA-OPERATOR SA set about preparing for smart metering implementation in 2010. So far the company has installed over 400,000 meters in its area, and plans to install a further 450,000 in 2015. Kalisz, the first fully AMI-covered city in Poland, was chosen for an in-depth analysis of the system. In particular, a consumer test was conducted there with the intention of answering the question about the strength of the demand side response to multi-zone tariffs and power reduction. Conclusions from the year-long test show the demand side response to multi-zone tariffs – i.e. the maximum temporary percentage reduction of energy consumption in the time zone with the tariff raised by a min. of 80% – stays within the 5–15% range. In the case of power reduction (the maximum temporary reduction of energy consumption in the time zone when the power available to a household is limited to 1 kW – the demand side response stays within the 10–30% range. An additional effect of tariff diversification and smart metering is a reduction in electricity consumption by 1–4% on working days (i.e. this is the effect of either the consumption reduction or shifting it to weekends. During the test energy consumers were subjected to both price incentives and education. Due to the fact that it is difficult to separate the effects of education and tariff structures, the company plans to continue the research related to verifying the effectiveness of individual activation tools in reducing electricity consumption by households.

Mitigation options for the industrial sector in Egypt

Energy Technology Data Exchange (ETDEWEB)

Gelil, I.A.; El-Touny, S.; Korkor, H. [Organization for Energy Conservation and Planning (OECP), Cairo (Egypt)

1996-12-31

Though its contribution to the global Greenhouse gases emission is relatively small, Egypt has signed and ratified the United Nations Framework Convention on Climate Change (UN FCCC) and has been playing an active role in the international efforts to deal with such environmental challenges. Energy efficiency has been one of the main strategies that Egypt has adopted to improve environmental quality and enhance economic competitiveness. This paper highlights three initiatives currently underway to improve energy efficiency of the Egyptian industry. The first is a project that has been recently completed by OECP to assess potential GHG mitigation options available in Egypt`s oil refineries. The second initiative is an assessment of GHG mitigation potential in the Small and Medium size Enterprises (SME) in the Mediterranean city of Alexandria. The third one focuses on identifying demand side management options in some industrial electricity consumers in the same city.

Understanding the side effects of emission trading: implications for waste management.

Science.gov (United States)

Braschel, Nina; Posch, Alfred; Pierer, Magdalena

2014-01-01

The trading of emission allowances is an important market instrument in climate policy. However, the inclusion of certain branches of industry in the trading system not only provides incentives for emission reduction, it also entails unwanted side effects. Thus, the objective of the present study is to identify such side effects-positive and negative-by examining the potential impact of waste management inclusion in the European Union Emissions Trading Scheme (EU ETS). Desk research was supplemented with qualitative and quantitative empirical analysis (based on expert interviews and a questionnaire) in order to analyse the related perceptions and expectations of actors and stakeholders. The impact of waste management inclusion in the EU ETS is analysed in terms of the following three areas: (i) costs and cost pass-through, (ii), competitiveness and market position, and (iii) carbon leakage. Concerning expectations in the area of costs, both the interviewed experts and the practitioners surveyed thought that costs were likely to increase or that they could be passed on to customers. However, experts and practitioners differed with respect to the possibility of carbon leakage. Clearly, increased knowledge of the possible impact arising from inclusion of the waste sector in the EU ETS would enable managers to become more proactive and to manage waste streams and treatment options more economically.

Renewable generation and demand response integration in micro-grids. Development of a new energy management and control system

Energy Technology Data Exchange (ETDEWEB)

Alvarez-Bel, C.; Escriva-Escriva, G.; Alcazar-Ortega, M. [Institute for Energy Engineering, Universitat Politecnica de Valencia, Valencia (Spain)

2013-11-15

The aim of this research resides in the development of an energy management and control system to control a micro-grid based on the use of renewable generation and demand resources to introduce the application of demand response concepts to the management of micro-grids in order to effectively integrate the demand side as an operation resource for the grid and improve energy efficiency of the elements. As an additional result, the evaluation of reductions in the total amount of CO2 emitted into the atmosphere due to the improvement of the energy efficiency of the system is assessed.

Novel algorithm for aggregated demand response strategy for smart distribution network

NARCIS (Netherlands)

Babar, M.; Ahamed, I.; Shah, A.; Al-Ammar, E.A.; Malik, N.H.

2013-01-01

Advancement in demand side management strategies enables smart grid to cope with the ever increasing energy demand and provide economic benefit to all of it's stakeholders. Moreover, emerging concept of smart pricing and advances in load control can provide new business opportunities for demand side

Demonstration project: Load management on the user side at power shortages

International Nuclear Information System (INIS)

Lindskoug, Stefan

2005-10-01

The risk for power shortages during extreme cold weather has increased in Sweden. Comments are made that high electricity spot prices are important for holding down the demand. Through the consumers' higher price sensitivity, the electricity system can be operated with lower reserve capacity. The objective of the demonstration project is to show methods for reducing the electricity demand at the national level at high spot prices. An important prerequisite is that the measures must be profitable for all parties involved. Four separate studies were made, two concerning households, one industry and one for the district heating sector. The conclusion from the studies is that load management on the customer's side is an economic alternative to investment in new production capacity

The role of LDCs in conservation and demand management in 2007 : the Ontario Clean Air Alliance's response to the Ontario Power Authority's options paper

International Nuclear Information System (INIS)

Gibbons, J.

2006-01-01

A response to The Ontario Power Authority (OPA) discussion paper on the role of local distribution companies (LDC) was presented, with reference to conservation and demand management (CDM). This paper examined 2 implicit issues raised by the OPA paper: (1) the appropriate role of the OPA with respect to conservation and demand management, and (2) the role of the Ontario Energy Board (OEB) in streamlining its CDM regulatory approval process. It was suggested that LDCs are ideal agencies for the delivery of CDM as they are trusted sources of energy information and have existing business relationships with electricity consumers. Local electric utilities understand local conditions and needs and are better placed to meet them. Ontario's electric utilities are now eligible for conservation profit bonuses equal to 5 per cent of the bill savings that their energy efficiency programs create for customers. It was noted that the benefits of CDM programs have already been demonstrated. The establishment of CDM budget targets was advised. Options to finance CDM programs were reviewed, as well as various energy efficiency programs. It was suggested that the OPA should continue to be a strong public advocate for CDM, and promote stricter provincial and federal energy efficiency standards. Recommendations for streamlining the OEB's CDM regulatory approval process were presented. It was concluded that marginalizing the role of Ontario's electric utilities in the delivery of CDM programs will short-circuit Ontario's efforts to develop a conservation culture. 13 refs

Integrated modeling of water supply and demand under management options and climate change scenarios in Chifeng City, China

Science.gov (United States)

Lu Hao; Ge Sun; Yongqiang Liu; Hong Qian

2015-01-01

Water resource management is becoming increasingly challenging in northern China because of the rapid increase in water demand and decline in water supply due to climate change. We provide a case study demonstrating the importance of integrated watershed management in sustaining water resources in Chifeng City, northern China. We examine the consequences of various...

Simple models of district heating systems for load and demand side management and operational optimisation; Simple modeller for fjernvarmesystemer med henblik pae belastningsudjaevning og driftsoptimering

Energy Technology Data Exchange (ETDEWEB)

Boehm, B. [Technical Univ. of Denmark, Dept. of Mechanical Engineering, Kgs. Lyngby (Denmark); Larsen, H.V. [Risoe National Lab., System Analysis Dept., Roskilde (DK)

2004-12-01

The purpose of this research project has been to further develop and test simple (aggregated) models of district heating (DH) systems for simulation and operational optimization, and to investigate the influence of Load Management and Demand Side Management (DMS) on the total operational costs. The work is based on physical-mathematical modelling and simulation of DH systems, and is a continuation of previous EFP-96 work. In the present EFP-2001 project the goals have been to improve the Danish method of aggregation by addressing the problem of aggregation of pressure losses, and to test the methods on a much larger data set than in the EFP-1996 project. In order to verify the models it is crucial to have good data at disposal. Full information on the heat loads and temperatures not only at the DH plant but also at every consumer (building) is needed, and therefore only a few DH systems in Denmark can supply such data. (BA)

Electronic Health Records Prospects in Egypt: A Demand-Side Perspective

OpenAIRE

Badran; Mona Farid

2017-01-01

The present study sheds light on the expected factors that would impact the Electronic Health Records (EHR) service in Egypt from the demand-side perspective, i.e. the health care consumer. This empirical study is motivated by the widespread use of EHR as a method of promoting health services globally, where it is considered as an efficiency enhancing, cost effective technology. Moreover, the healthcare sector in Egypt is gaining momentum, especially that the comprehensive healthcare and soci...

Estimating option values of solar radiation management assuming that climate sensitivity is uncertain.

Science.gov (United States)

Arino, Yosuke; Akimoto, Keigo; Sano, Fuminori; Homma, Takashi; Oda, Junichiro; Tomoda, Toshimasa

2016-05-24

Although solar radiation management (SRM) might play a role as an emergency geoengineering measure, its potential risks remain uncertain, and hence there are ethical and governance issues in the face of SRM's actual deployment. By using an integrated assessment model, we first present one possible methodology for evaluating the value arising from retaining an SRM option given the uncertainty of climate sensitivity, and also examine sensitivities of the option value to SRM's side effects (damages). Reflecting the governance challenges on immediate SRM deployment, we assume scenarios in which SRM could only be deployed with a limited degree of cooling (0.5 °C) only after 2050, when climate sensitivity uncertainty is assumed to be resolved and only when the sensitivity is found to be high (T2x = 4 °C). We conduct a cost-effectiveness analysis with constraining temperature rise as the objective. The SRM option value is originated from its rapid cooling capability that would alleviate the mitigation requirement under climate sensitivity uncertainty and thereby reduce mitigation costs. According to our estimates, the option value during 1990-2049 for a +2.4 °C target (the lowest temperature target level for which there were feasible solutions in this model study) relative to preindustrial levels were in the range between $2.5 and $5.9 trillion, taking into account the maximum level of side effects shown in the existing literature. The result indicates that lower limits of the option values for temperature targets below +2.4 °C would be greater than $2.5 trillion.

Promoting healthcare innovation on the demand side

Science.gov (United States)

Eisenberg, Rebecca S.

2017-01-01

Abstract Innovation policy often focuses on fortifying the incentives of firms that develop and sell new products by offering them lucrative rights to exclude competitors from the market. Regulators also rely on these same firms—and on similar incentives—to develop information about the effects of their products in patients, despite their obvious conflict of interest. The result may be a distorted understanding that leads to overuse of expensive new medical technologies. Recent technological advances have put healthcare payers in an excellent position to play a larger role in future innovation to improve healthcare and reduce its costs. Insurance companies and integrated healthcare providers have custody of treasure troves of data about healthcare provision and outcomes that can yield valuable insights about the effects of medical treatment without the need to conduct costly clinical trials. Some integrated healthcare systems have seized upon this advantage to make notable discoveries about the effects of particular products that have changed the standard of care. Moreover, to the extent that healthcare payers can profit from reducing costs, they will seek to avoid inappropriate use of costly technologies. Greater involvement of payers in healthcare innovation thus offers a potential counterweight to the incentives of product sellers to promote excessive use of costly new products. In recent years, the federal government has sought to promote innovation through analysis of healthcare records in a series of initiatives; some picture insurers as passive data repositories, while others provide opportunities for insurers to take a more active role in innovation. In this paper, we examine the role of health insurers in developing new knowledge about the provision and effects of healthcare—what we call ‘demand-side innovation’. We address the contours of this underexplored area of innovation and describe the behavior of participating firms. We examine the

Water Demand Management Policy Brief No

International Development Research Centre (IDRC) Digital Library (Canada)

Bob Stanley

Water demand management ― WDM ― can be hard to define. More an issue of policy than of technology, it is about managing and moderating our demands for good quality fresh water. It is less a matter of piping and pumps and more a tool ...

A Danish Heat Atlas for Supply Strategies and Demand Side Management

DEFF Research Database (Denmark)

Möller, Bernd

The expansion of district heating, the assessment of the impact of heat supply strategies, as well as the analysis of significant heat demand savings require sound decision support at high detail. Data is needed to continuously quantify potentials and costs of measures in the end-use and supply...... heat demand and possible savings. The location of each building relative to heat supply technologies is mapped and used for the assessment of supply strategies by potentials, costs and environmental impact. Both elements can furthermore be used to balance investments in supply with investments...

Orchestrating utility supply and demand in real-time via the Internet, home networks, and smart appliances

Energy Technology Data Exchange (ETDEWEB)

Cruickshank, R.F. III [Power Networks, Big Indian, NY (United States)

2008-07-01

This paper presented a model to illustrate the efficient coordination between the supply-side and demand-side of household electricity use and the magnitude of demand that can be managed using real-time pricing. In real-time supply and demand side management, a variable price for service is sent via Internet from the supply-side to the demand-side. The 3 benefits to this type of demand-side management are that traditional fossil-fuelled electrical capacity can operate less of the time and more efficiently; renewable electrical capacity such as wind and solar power can be put to use more efficiently when it becomes available; and additional means are available to protect the transmission and distribution infrastructure of the utility. A critical requirement is that pricing should change frequently throughout the day so that budget conscious consumers do not have to wait too long for favourable pricing to use their appliances. 12 refs., 9 figs.

Demand side load management using a three step optimization methodology

NARCIS (Netherlands)

Bakker, Vincent; Bosman, M.G.C.; Molderink, Albert; Hurink, Johann L.; Smit, Gerardus Johannes Maria

2010-01-01

In order to keep a proper functional electricity grid and to prevent large investments in the current grid, the creation, transmission and consumption of electricity needs to be controlled and organized in a different way as done nowadays. Smart meters, distributed generation and -storage and demand

Waste Management Options for Long-Duration Space Missions: When to Reject, Reuse, or Recycle

Science.gov (United States)

Linne, Diane L.; Palaszewski, Bryan A.; Gokoglu, Suleyman; Gallo, Christopher A.; Balasubramaniam, Ramaswamy; Hegde, Uday G.

2014-01-01

The amount of waste generated on long-duration space missions away from Earth orbit creates the daunting challenge of how to manage the waste through reuse, rejection, or recycle. The option to merely dispose of the solid waste through an airlock to space was studied for both Earth-moon libration point missions and crewed Mars missions. Although the unique dynamic characteristics of an orbit around L2 might allow some discarded waste to intersect the lunar surface before re-impacting the spacecraft, the large amount of waste needed to be managed and potential hazards associated with volatiles recondensing on the spacecraft surfaces make this option problematic. A second option evaluated is to process the waste into useful gases to be either vented to space or used in various propulsion systems. These propellants could then be used to provide the yearly station-keeping needs at an L2 orbit, or if processed into oxygen and methane propellants, could be used to augment science exploration by enabling lunar mini landers to the far side of the moon.

Integrating Demand-Side Resources into the Electric Grid: Economic and Environmental Considerations

Science.gov (United States)

Fisher, Michael J.

Demand-side resources are taking an increasingly prominent role in providing essential grid services once provided by thermal power plants. This thesis considers the economic feasibility and environmental effects of integrating demand-side resources into the electric grid with consideration given to the diversity of market and environmental conditions that can affect their behavior. Chapter 2 explores the private economics and system-level carbon dioxide reduction when using demand response for spinning reserve. Steady end uses like lighting are more than twice as profitable as seasonal end uses because spinning reserve is needed year-round. Avoided carbon emission damages from using demand response instead of fossil fuel generation for spinning reserve are sufficient to justify incentives for demand response resources. Chapter 3 quantifies the system-level net emissions rate and private economics of behind-the-meter energy storage. Net emission rates are lower than marginal emission rates for power plants and in-line with estimates of net emission rates from grid-level storage. The economics are favorable for many buildings in regions with high demand charges like California and New York, even without subsidies. Future penetration into regions with average charges like Pennsylvania will depend greatly on installation cost reductions and wholesale prices for ancillary services. Chapter 4 outlines a novel econometric model to quantify potential revenues from energy storage that reduces demand charges. The model is based on a novel predictive metric that is derived from the building's load profile. Normalized revenue estimates are independent of the power capacity of the battery holding other performance characteristics equal, which can be used to calculate the profit-maximizing storage size. Chapter 5 analyzes the economic feasibility of flow batteries in the commercial and industrial market. Flow batteries at a 4-hour duration must be less expensive on a dollar per

Improving Water Demand Management Addressing Socioeconomic ...

International Development Research Centre (IDRC) Digital Library (Canada)

2012-01-20

Jan 20, 2012 ... Efforts to conserve water by improving water demand management policies in the Middle East and North Africa are often slowed or even thwarted by a lack of political consensus and support for water demand management from key powerful stakeholders with vested interest in the status quo. This policy ...

Improving Water Demand Management Addressing Socioeconomic ...

International Development Research Centre (IDRC) Digital Library (Canada)

Efforts to conserve water by improving water demand management policies in the Middle East and North Africa are often slowed or even thwarted by a lack of political consensus and support for water demand management from key powerful stakeholders with vested interest in the status quo. This policy brief based on ...

Equity Portfolio Management Using Option Price Information

DEFF Research Database (Denmark)

Christoffersen, Peter; Pan, Xuhui (Nick)

We survey the recent academic literature that uses option-implied information to construct equity portfolios. Studies show that equity managers can earn a positive alpha by using information in individual equity options, by using stocks' exposure to information in market index options, and by using...... stocks' exposure to crude oil option information. Option-implied information can also help construct better mean-variance portfolios and better estimates of market beta....

A demand-based management option to address boat congestion at ...

African Journals Online (AJOL)

2015-07-04

speed boating and jet skiing represent. 20%, 65%, 7.5% and 7.5%, respectively. This implies 4.6 angling boats, 48.75 leisure boats, 0.675 water skiers or speed boaters ..... Theory and Application to Travel Demand. MIT Press ...

Real-Time Congestion Management in Distribution Networks by Flexible Demand Swap

DEFF Research Database (Denmark)

Huang, Shaojun; Wu, Qiuwei

2017-01-01

In addition to the day-ahead congestion management in distribution networks, the real-time congestion management is very important because many unforeseen events can occur at the real operation time, e.g. loss of generation of distributed energy resources (DERs) or inaccurate forecast of energy...... pumps (HPs) for real time congestion management. The swap method can maintain the power balance of the system and avoid the imbalance cost of activating the flexibility service. An algorithm for forming swaps through optimal power flow (OPF) and mixed integer linear programming (MILP) is proposed...... consumption or production. Flexibility service from demand will be a good option to solve the real-time congestions if the cost of activating the flexibility service is fully addressed. This paper proposes a new method, namely “swap”, to employ the flexibility service from electric vehicles (EVs) and heat...

Equity Portfolio Management Using Option Price Information

DEFF Research Database (Denmark)

Christoffersen, Peter; Pan, Xuhui (Nick)

We survey the recent academic literature that uses option-implied information to construct equity portfolios. Studies show that equity managers can earn a positive alpha by using information in individual equity options, by using stocks' exposure to information in market index options, and by usi...

Coordinated Demand Response and Distributed Generation Management in Residential Smart Microgrids

DEFF Research Database (Denmark)

Anvari-Moghaddam, Amjad; Mokhtari, Ghassem; Guerrero, Josep M.

2016-01-01

potentials to increase the functionality of a typical demand-side management (DSM) strategy, and typical implementation of building-level DERs by integrating them into a cohesive, networked package that fully utilizes smart energy-efficient end-use devices, advanced building control/automation systems......Nowadays with the emerging of small-scale integrated energy systems (IESs) in form of residential smart microgrids (SMGs), a large portion of energy can be saved through coordinated scheduling of smart household devices and management of distributed energy resources (DERs). There are significant......, and an integrated communications architecture to efficiently manage energy and comfort at the end-use location. By the aid of such technologies, residential consumers have also the capability to mitigate their energy costs and satisfy their own requirements paying less attention to the configuration of the energy...

A socio-technical investigation of the smart grid: Implications for demand-side activities of electricity service providers

Science.gov (United States)

Corbett, Jacqueline Marie

Enabled by advanced communication and information technologies, the smart grid represents a major transformation for the electricity sector. Vast quantities of data and two-way communications abilities create the potential for a flexible, data-driven, multi-directional supply and consumption network well equipped to meet the challenges of the next century. For electricity service providers ("utilities"), the smart grid provides opportunities for improved business practices and new business models; however, a transformation of such magnitude is not without risks. Three related studies are conducted to explore the implications of the smart grid on utilities' demand-side activities. An initial conceptual framework, based on organizational information processing theory, suggests that utilities' performance depends on the fit between the information processing requirements and capacities associated with a given demand-side activity. Using secondary data and multiple regression analyses, the first study finds, consistent with OIPT, a positive relationship between utilities' advanced meter deployments and demand-side management performance. However, it also finds that meters with only data collection capacities are associated with lower performance, suggesting the presence of information waste causing operational inefficiencies. In the second study, interviews with industry participants provide partial support for the initial conceptual model, new insights are gained with respect to information processing fit and information waste, and "big data" is identified as a central theme of the smart grid. To derive richer theoretical insights, the third study employs a grounded theory approach examining the experience of one successful utility in detail. Based on interviews and documentary data, the paradox of dynamic stability emerges as an essential enabler of utilities' performance in the smart grid environment. Within this context, the frames of opportunity, control, and data

Empowering Variable Renewables - Options for Flexible Electricity Systems

Energy Technology Data Exchange (ETDEWEB)

Chandler, Hugo [Renewable Energy Unit, International Energy Agency, Paris (France)

2008-07-01

A flexible electricity system is one that can respond reliably, and rapidly, to large fluctuations in supply and demand. Flexibility is already present in all power systems, in order to manage fluctuations in demand, and it is crucial for high performance and economic and reliable operation. This paper looks at measures to increase flexibility. but careful cost/benefit analysis is essential, and specific national and regional circumstances will influence the choice of option(s).

The Dark Side of Management

DEFF Research Database (Denmark)

Hanlon, Gerard; Dunne, Stephen; Johnsen, Christian Garmann

2017-01-01

Towards the end of 2015, the ephemera collective organised, chaired and participated within two separate Q+A panels celebrating the launch of Gerard Hanlon’s The dark side of management: A secret history of management theory. The events took place in The University of Leicester’s School of Manage...... of Management and Copenhagen Business School’s Management, Politics and Philosophy Department. Each of the events were recorded, transcribed, edited and amalgamated into the following feature....

Proceedings of the Management options information seminar

International Nuclear Information System (INIS)

2002-01-01

This seminar was held in order to provide an opportunity to participants to broaden their knowledge concerning the numerous management options that are available when dealing with emissions generated by the electric power sector. It also represented an opportunity to gather information with regard to a host of different options to support the Electricity Project Team. The presentations centred on topics such as assessment, design and development of management options for the emissions of the electric power industry in Alberta. The legal, economic, social and environmental aspects were considered by the speakers for the options, and the perspectives included experience gained from hands on projects and initiatives. The reasons underlying the selection of options were revealed and lessons learned examined. Of the 14 presentations and the closing remarks speech, two presentations were included in this database. refs., tabs., figs

Performance Assessment of Aggregation Control Services for Demand Response

DEFF Research Database (Denmark)

Bondy, Daniel Esteban Morales; Costanzo, Giuseppe Tommaso; Heussen, Kai

2014-01-01

Aggregation algorithms that provide services to the grid via demand side management are moving from research ideas to the market. With the diversity of the technology delivering such services, it becomes essential to establish transparent performance standards from a service delivery perspective...... of the quality of service provided by an aggregation control algorithm. By a detailed case study we present and an application of the index, comparing the performance of two different control architectures for demand side management delivering a distribution grid service....

Fast demand response in support of the active distribution network

NARCIS (Netherlands)

MacDougall, P.; Heskes, P.; Crolla, P.; Burt, G.; Warmer, C.

2013-01-01

Demand side management has traditionally been investigated for "normal" operation services such as balancing and congestion management. However they potentially could be utilized for Distributed Network Operator (DNO) services. This paper investigates and validates the use of a supply and demand

Local government involvement in long term resource planning for community energy systems. Demand side management

Energy Technology Data Exchange (ETDEWEB)

1992-03-01

A program was developed to coordinate governmental, research, utility, and business energy savings efforts, and to evaluate future potential actions, based on actual field data obtained during the implementation of Phase I of the State Resource Plan. This has lead to the establishment of a state conservation and energy efficiency fund for the purpose of establishing a DSM Program. By taking a state wide perspective on resource planning, additional savings, including environmental benefits, can be achieved through further conservation and demand management. This effort has already blossomed into a state directive for DSM programs for the natural gas industry.

Social demand for multiple benefits provided by Aleppo pine forest management in Catalonia, Spain

DEFF Research Database (Denmark)

Varela, Elsa; Jacobsen, Jette Bredahl; Mavsar, Robert

2017-01-01

This paper estimates the social demand for key benefits provided by Aleppo pine forests in Catalonia that can be enhanced by management. These so-called externalities are the side effects of forest management on citizens’ welfare and can be either positive or negative. The externalities addressed...... are: biodiversity (measured as the number of tree species), accessibility for practicing recreational activities, CO2 sequestration and annual burned area by wildfires. By the use of a choice experiment, an economic valuation method, we estimate in a joint manner people’s preferences...

Managing AVN following internal fixation: treatment options and clinical results.

Science.gov (United States)

Hoskinson, Simon; Morison, Zachary; Shahrokhi, Shahram; Schemitsch, Emil H

2015-03-01

Avascular necrosis (AVN) after internal fixation of intracapsular hip fractures is a progressive multifactorial disease that ultimately results in local ischemia with ensuing osteocyte necrosis and structural compromise. This disease can cause significant clinical morbidity and affects patients of any age, including young and active patients. Effective treatment of this condition among young adults is challenging due to their high functional demands. The aim of managing AVN is to relieve pain, preserve range of movement and improve function. Treatment methods vary depending on the stage of the disease and can be broadly categorised into two options, hip preserving surgery and hip arthroplasty. Although, hip preserving techniques are attractive in the young adult, they may alter the morphology of the proximal femur and make subsequent arthroplasty more challenging. Conversely, arthroplasty in the young adult may require repeat revision procedures throughout the patient's life. Current evidence suggests that modifications of prevailing treatments, in addition to new technologies, have led to the development of management strategies that may be able to alter the course of femoral head osteonecrosis. This review aims to summarise the options available for treatment of AVN in the young adult and review the clinical results. Copyright © 2014 Elsevier Ltd. All rights reserved.

Oh and by the way, you get meter readings too : a look at distribution automation, intelligent grids, and demand side management : getting the real value from your AMI

Energy Technology Data Exchange (ETDEWEB)

Summerlin, T. [Gestalt, Camden, NJ (United States); Ferguson, P.D. [Newmarket Hydro Ltd., Newmarket, ON (Canada)

2006-07-01

The full value of smart metering programs will be realized when information and communication capabilities are used to enable distribution automation, intelligent grids, and sufficient data management that will transform interval meter data into useful information. By leveraging and managing meter data effectively, utilities can increase their operational efficiency, improve their understanding of customers' needs, and develop more effective demand side management programs. This presentation examined some of the changing priorities of advanced metering infrastructure (AMI) strategies, and provided details of meter data management (MDM) technologies developed to help utilities increase efficiency, cut costs and provide better service to their customers. An MDM system is the set of data bases and applications required to provide utilities with a solution for the data retention, analysis and storage repository gaps that will be created when monthly manual meter readings are replaced with AMI systems. In order to resolve storage, functionality and legacy integration gaps, MDM systems must be scalable systems that can support large and small quantities of meter data, and must also conform to industry standard data warehouse designs. Data structure in the systems must support both regulated and deregulated markets, and be capable of providing extensive graphical, tabular and Excel export of the metered and totalized data from the interval to system level. MDM systems can provide improved support for demand response decision-making processes; distribution planning and reliability; outage management; revenue assurance; forecasting; and curtailment. It was concluded that MDM systems can be used to improve processes and provide additional benefits well beyond the meter reading and billing process benefits originally identified by utilities as a primary goal of implementing AMI. refs., tabs., figs.

Predictive Control of a Domestic Freezer for Real-Time Demand Response Applications

NARCIS (Netherlands)

Baghina, N.G.; Lampropoulos, I.; Asare-Bediako, B.; Kling, W.L.; Ribeiro, P.F.

2012-01-01

Demand side management and demand response aim to maximize the efficiency of the electricity delivery process by exploiting the flexibility of customers. At residential level, demand response can be applied only to a limited number of appliances, through load management, due to user intervention or

Maximizing Energy Savings Reliability in BC Hydro Industrial Demand-side Management Programs: An Assessment of Performance Incentive Models

Science.gov (United States)

Gosman, Nathaniel

For energy utilities faced with expanded jurisdictional energy efficiency requirements and pursuing demand-side management (DSM) incentive programs in the large industrial sector, performance incentive programs can be an effective means to maximize the reliability of planned energy savings. Performance incentive programs balance the objectives of high participation rates with persistent energy savings by: (1) providing financial incentives and resources to minimize constraints to investment in energy efficiency, and (2) requiring that incentive payments be dependent on measured energy savings over time. As BC Hydro increases its DSM initiatives to meet the Clean Energy Act objective to reduce at least 66 per cent of new electricity demand with DSM by 2020, the utility is faced with a higher level of DSM risk, or uncertainties that impact the costeffective acquisition of planned energy savings. For industrial DSM incentive programs, DSM risk can be broken down into project development and project performance risks. Development risk represents the project ramp-up phase and is the risk that planned energy savings do not materialize due to low customer response to program incentives. Performance risk represents the operational phase and is the risk that planned energy savings do not persist over the effective measure life. DSM project development and performance risks are, in turn, a result of industrial economic, technological and organizational conditions, or DSM risk factors. In the BC large industrial sector, and characteristic of large industrial sectors in general, these DSM risk factors include: (1) capital constraints to investment in energy efficiency, (2) commodity price volatility, (3) limited internal staffing resources to deploy towards energy efficiency, (4) variable load, process-based energy saving potential, and (5) a lack of organizational awareness of an operation's energy efficiency over time (energy performance). This research assessed the capacity

Achieving demand side management through eco-industrial networks

International Nuclear Information System (INIS)

Knight, N.

2002-01-01

This Power Point presentation describes the progress made by the Greater Vancouver Regional District (GVRD) in achieving sustainable development. The GVRD provides regional level infrastructure for drinking water, liquid waste treatment and solid waste management. Member municipalities provide the complementary services to businesses and residents of the communities. Particular emphasis has been given to protecting the green zone, building complete communities, achieving a compact Metropolitain region, and increasing transportation choices. The GVRD has also adopted a Livable Region Strategic Plan (LRSP) which encompasses economic, social and environmental issues. All member municipalities of the GVRD have prepared statements that indicate how their local policies will help achieve the LRSP goals. This presentation also includes a review of the region's air quality in order to emphasize the link between air quality and the pattern of urban development and transportation choices. The GVRD air quality management is unique in Canada. tabs., figs

“Souls of the ancestor that knock us out” and other tales. A qualitative study to identify demand-side factors influencing malaria case management in Cambodia

Directory of Open Access Journals (Sweden)

O’Connell Kathryn A

2012-10-01

Full Text Available Abstract Background Appropriate case management of suspected malaria in Cambodia is critical given anti-malarial drug resistance in the region. Improving diagnosis and the use of recommended malarial treatments is a challenge in Cambodia where self-treatment and usage of drug cocktails is widespread, a notable difference from malaria treatment seeking in other countries. This qualitative study adds to the limited evidence base on Cambodian practices, aiming to understand the demand-side factors influencing treatment-seeking behaviour, including the types of home treatments, perceptions of cocktail medicines and reasons for diagnostic testing. The findings may help guide intervention design. Methods The study used in-depth interviews (IDIs (N = 16 and focus group discussions (FGDs (N = 12 with Cambodian adults from malaria-endemic areas who had experienced malaria fever in the previous two weeks. Data were analysed using NVivo software. Results Findings suggest that Cambodians initially treat suspected malaria at home with home remedies and traditional medicines. When seeking treatment outside the home, respondents frequently reported receiving a cocktail of medicines from trusted providers. Cocktails are perceived as less expensive and more effective than full-course, pre-packaged medicines. Barriers to diagnostic testing include a belief in the ability to self-diagnose based on symptoms, cost and reliance on providers to recommend a test. Factors that facilitate testing include recommendation by trusted providers and a belief that anti-malarial treatment for illnesses other than malaria can be harmful. Conclusions Treatment-seeking behaviour for malaria in Cambodia is complex, driven by cultural norms, practicalities and episode-related factors. Effective malaria treatment programmes will benefit from interventions and communication materials that leverage these demand-side factors, promoting prompt visits to facilities for suspected

Demand-side financing measures to increase maternal health service utilisation and improve health outcomes: a systematic review of evidence from low- and middle-income countries.

Science.gov (United States)

Murray, Susan F; Hunter, Benjamin M; Bisht, Ramila; Ensor, Tim; Bick, Debra

2012-01-01

, observational and descriptive), qualitative studies (including designs based on phenomenology, grounded theory, ethnography, action research and feminist research), and economic studies (cost-effectiveness, cost-utility and costs studies). The Joanna Briggs Institute methodology for mixed-method systematic reviews was adopted. A three-step systematic search strategy was used to: 1) identify key terms, 2) search bibliographic databases and 3) retrieve additional publications from reference lists and sources of grey literature. Data were extracted from papers included in the review using the standardised data extraction tools for quantitative, qualitative and economic data from the Joanna Briggs Institute System for the Unified Management, Assessment and Review of Information. The quantitative and economic findings are presented in narrative form. Qualitative research findings were pooled using the Joanna Briggs Institute Qualitative Assessment and Review Instrument. This involved the aggregation or synthesis of findings to generate a set of statements that represent that aggregation, through assembling the findings (Level 1 findings), and categorising these findings on the basis of similarity in meaning (Level 2 findings). These categories were then subjected to a meta-synthesis in order to produce a single comprehensive set of synthesised findings (Level 3 findings) that can be used as a basis for evidence-based practice or policy. Seventy-two studies were included in the review. Drawing on work from several continents, many of the included studies were reports and evaluations for relevant government or funding agencies and represented important lesson-learning about implementation issues. However, fewer than half were published in peer reviewed journals and few were of high research quality.For three modes of demand-side financing (conditional cash transfers, payments to offset costs of access to maternal healthcare, and vouchers for maternity services) we found evidence

Hazardous landfill management, control options

International Nuclear Information System (INIS)

Corbin, M.H.; Lederman, P.B.

1982-01-01

The land disposal of hazardous wastes has been a common practice over the last half century. The industrial and environmental communities, as well as the public, have an immediate challenge to control the contaminants that may be released from waste land disposal facilities. At the same time, land disposal continues to be, in many cases, the only available disposal technique that can be utilized in the next five years. Thus, it is extremely important that environmentally sound landfill management and control techniques be utilized, both for inactive and active sites. There are a number of key steps in developing a sound management and control plan. These include problem definition, personnel safety, characterization, evaluation of control options, cost-effectiveness analysis and development of an integrated control plan. A number of control options, including diversion, regrading, sealing, and leachate treatment are available and more cost effective in most cases than waste removal. These and other options, as well as the methodology to develop an integrated control plan, are discussed, together with examples. (Auth.)

Modeling and managing urban water demand through smart meters: Benefits and challenges from current research and emerging trends

Science.gov (United States)

Cominola, A.; Giuliani, M.; Castelletti, A.; Piga, D.; Rizzoli, A. E.

2015-12-01

Urban population growth, climate and land use change are expected to boost residential water demand in urban contexts in the next decades. In such a context, developing suitable demand-side management strategies is essential to meet future water demands, pursue water savings, and reduce the costs for water utilities. Yet, the effectiveness of water demand management strategies (WDMS) relies on our understanding of water consumers' behavior, their consumption habits, and the water use drivers. While low spatial and temporal resolution water consumption data, as traditionally gathered for billing purposes, hardly support this understanding, the advent of high-resolution, smart metering technologies allowed for quasi real-time monitoring water consumption at the single household level. This, in turn, is advancing our ability in characterizing consumers' behavior, modeling, and designing user-oriented residential water demand management strategies. Several water smart metering programs have been rolled-out in the last two decades worldwide, addressing one or more of the following water demand management phases: (i) data gathering, (ii) water end-uses characterization, (iii) user modeling, (iv) design and implementation of personalized WDMS. Moreover, the number of research studies in this domain is quickly increasing and big economic investments are currently being devoted worldwide to smart metering programs. With this work, we contribute the first comprehensive review of more than 100 experiences in the field of residential water demand modeling and management, and we propose a general framework for their classification. We revise consolidated practices, identify emerging trends and highlight the challenges and opportunities for future developments given by the use of smart meters advancing residential water demand management. Our analysis of the status quo of smart urban water demand management research and market constitutes a structured collection of information

Innovation and Demand

DEFF Research Database (Denmark)

Andersen, Esben Sloth

2007-01-01

the demand-side of markets in the simplest possible way. This strategy has allowed a gradual increase in the sophistication of supply-side aspects of economic evolution, but the one-sided focus on supply is facing diminishing returns. Therefore, demand-side aspects of economic evolution have in recent years...... received increased attention. The present paper argues that the new emphasis on demand-side factors is quite crucial for a deepened understanding of economic evolution. The major reasons are the following: First, demand represents the core force of selection that gives direction to the evolutionary process....... Second, firms' innovative activities relate, directly or indirectly, to the structure of expected and actual demand. Third, the demand side represents the most obvious way of turning to the much-needed analysis of macro-evolutionary change of the economic system....

Blockchain Based Decentralized Management of Demand Response Programs in Smart Energy Grids

Science.gov (United States)

Pop, Claudia; Cioara, Tudor; Antal, Marcel; Anghel, Ionut; Salomie, Ioan; Bertoncini, Massimo

2018-01-01

In this paper, we investigate the use of decentralized blockchain mechanisms for delivering transparent, secure, reliable, and timely energy flexibility, under the form of adaptation of energy demand profiles of Distributed Energy Prosumers, to all the stakeholders involved in the flexibility markets (Distribution System Operators primarily, retailers, aggregators, etc.). In our approach, a blockchain based distributed ledger stores in a tamper proof manner the energy prosumption information collected from Internet of Things smart metering devices, while self-enforcing smart contracts programmatically define the expected energy flexibility at the level of each prosumer, the associated rewards or penalties, and the rules for balancing the energy demand with the energy production at grid level. Consensus based validation will be used for demand response programs validation and to activate the appropriate financial settlement for the flexibility providers. The approach was validated using a prototype implemented in an Ethereum platform using energy consumption and production traces of several buildings from literature data sets. The results show that our blockchain based distributed demand side management can be used for matching energy demand and production at smart grid level, the demand response signal being followed with high accuracy, while the amount of energy flexibility needed for convergence is reduced. PMID:29315250

Blockchain Based Decentralized Management of Demand Response Programs in Smart Energy Grids.

Science.gov (United States)

Pop, Claudia; Cioara, Tudor; Antal, Marcel; Anghel, Ionut; Salomie, Ioan; Bertoncini, Massimo

2018-01-09

In this paper, we investigate the use of decentralized blockchain mechanisms for delivering transparent, secure, reliable, and timely energy flexibility, under the form of adaptation of energy demand profiles of Distributed Energy Prosumers, to all the stakeholders involved in the flexibility markets (Distribution System Operators primarily, retailers, aggregators, etc.). In our approach, a blockchain based distributed ledger stores in a tamper proof manner the energy prosumption information collected from Internet of Things smart metering devices, while self-enforcing smart contracts programmatically define the expected energy flexibility at the level of each prosumer, the associated rewards or penalties, and the rules for balancing the energy demand with the energy production at grid level. Consensus based validation will be used for demand response programs validation and to activate the appropriate financial settlement for the flexibility providers. The approach was validated using a prototype implemented in an Ethereum platform using energy consumption and production traces of several buildings from literature data sets. The results show that our blockchain based distributed demand side management can be used for matching energy demand and production at smart grid level, the demand response signal being followed with high accuracy, while the amount of energy flexibility needed for convergence is reduced.

Blockchain Based Decentralized Management of Demand Response Programs in Smart Energy Grids

Directory of Open Access Journals (Sweden)

Claudia Pop

2018-01-01

Full Text Available In this paper, we investigate the use of decentralized blockchain mechanisms for delivering transparent, secure, reliable, and timely energy flexibility, under the form of adaptation of energy demand profiles of Distributed Energy Prosumers, to all the stakeholders involved in the flexibility markets (Distribution System Operators primarily, retailers, aggregators, etc.. In our approach, a blockchain based distributed ledger stores in a tamper proof manner the energy prosumption information collected from Internet of Things smart metering devices, while self-enforcing smart contracts programmatically define the expected energy flexibility at the level of each prosumer, the associated rewards or penalties, and the rules for balancing the energy demand with the energy production at grid level. Consensus based validation will be used for demand response programs validation and to activate the appropriate financial settlement for the flexibility providers. The approach was validated using a prototype implemented in an Ethereum platform using energy consumption and production traces of several buildings from literature data sets. The results show that our blockchain based distributed demand side management can be used for matching energy demand and production at smart grid level, the demand response signal being followed with high accuracy, while the amount of energy flexibility needed for convergence is reduced.

Demand chain management - The evolution

Directory of Open Access Journals (Sweden)

D Ericsson

2011-06-01

Full Text Available The concepts of Supply Chain Management (SCM and Demand Chain Management (DCM are among the new and debated topics concerning logistics in the literature. The question considered in this paper is: “Are these concepts needed or will they just add to the confusion?” Lasting business concepts have always evolved in close interaction between business and academia. Different approaches start out in business and they are then, more or less si- multaneously, aligned, integrated, systemised and structured in academia. In this way a terminology (or language is provided that helps in further diffusion of the concepts. There is a lack of consensus on the definition of the concept of SCM. This may be one of the major reasons for the difficulty in advancing the science and measuring the results of implementation in business. Relationships in SCM span from rather loose coalitions to highly structured virtual network integrations. DCM is a highly organised chain in which the key is mutual interdependence and partnership. The purpose is to create a distinctive competence for the chain as a whole that helps to identify and satisfy customer needs and wishes. The classical research concerning vertical marketing systems is very helpful in systemising the rather unstructured discussions in current SCM research. The trend lies in increasing competition between channels rather than between companies, which in turn leads to the creation of channels with a high degree of partnership and mutual interdependence between members. These types of channels are known as organised vertical marketing systems in the classic marketing channel research. The behaviour in these types of channels, as well as the formal and informal structures, roles in the network, power and dependence relations, etc. are well covered topics in the literature. The concept of vertical marketing systems lies behind the definition of demand chains and demand chain management proposed in this paper. A

A review on technological options of waste to energy for effective management of municipal solid waste.

Science.gov (United States)

Kumar, Atul; Samadder, S R

2017-11-01

Approximately one-fourth population across the world rely on traditional fuels (kerosene, natural gas, biomass residue, firewood, coal, animal dung, etc.) for domestic use despite significant socioeconomic and technological development. Fossil fuel reserves are being exploited at a very fast rate to meet the increasing energy demands, so there is a need to find alternative sources of energy before all the fossil fuel reserves are depleted. Waste to energy (WTE) can be considered as a potential alternative source of energy, which is economically viable and environmentally sustainable. The present study reviewed the current global scenario of WTE technological options (incineration, pyrolysis, gasification, anaerobic digestion, and landfilling with gas recovery) for effective energy recovery and the challenges faced by developed and developing countries. This review will provide a framework for evaluating WTE technological options based on case studies of developed and developing countries. Unsanitary landfilling is the most commonly practiced waste disposal option in the developing countries. However, developed countries have realised the potential of WTE technologies for effective municipal solid waste management (MSWM). This review will help the policy makers and the implementing authorities involved in MSWM to understand the current status, challenges and barriers for effective management of municipal solid waste. This review concluded WTE as a potential renewable source of energy, which will partly meet the energy demand and ensure effective MSWM. Copyright © 2017 Elsevier Ltd. All rights reserved.

Novel effects of demand side management data on accuracy of electrical energy consumption modeling and long-term forecasting

International Nuclear Information System (INIS)

Ardakani, F.J.; Ardehali, M.M.

2014-01-01

Highlights: • Novel effects of DSM data on electricity consumption forecasting is examined. • Optimal ANN models based on IPSO and SFL algorithms are developed. • Addition of DSM data to socio-economic indicators data reduces MAPE by 36%. - Abstract: Worldwide implementation of demand side management (DSM) programs has had positive impacts on electrical energy consumption (EEC) and the examination of their effects on long-term forecasting is warranted. The objective of this study is to investigate the effects of historical DSM data on accuracy of EEC modeling and long-term forecasting. To achieve the objective, optimal artificial neural network (ANN) models based on improved particle swarm optimization (IPSO) and shuffled frog-leaping (SFL) algorithms are developed for EEC forecasting. For long-term EEC modeling and forecasting for the U.S. for 2010–2030, two historical data types used in conjunction with developed models include (i) EEC and (ii) socio-economic indicators, namely, gross domestic product, energy imports, energy exports, and population for 1967–2009 period. Simulation results from IPSO-ANN and SFL-ANN models show that using socio-economic indicators as input data achieves lower mean absolute percentage error (MAPE) for long-term EEC forecasting, as compared with EEC data. Based on IPSO-ANN, it is found that, for the U.S. EEC long-term forecasting, the addition of DSM data to socio-economic indicators data reduces MAPE by 36% and results in the estimated difference of 3592.8 MBOE (5849.9 TW h) in EEC for 2010–2030

Partitioning and transmutation: Radioactive waste management option

International Nuclear Information System (INIS)

Stanculescu, A.

2005-01-01

Growing world population with increasing energy needs, especially in the developing countries, Threat of global warming due to CO 2 emissions demands non-fossil electricity production. Nuclear will have to be part of a sustainable mix of energy production options Figures show that 350 GWe worldwide capacity is 'nuclear'. Present worldwide spent fuel (containing high Pu inventory) and HLW would need large repositories. In view of the previous facts this lecture deals Partitioning and transmutation as radioactive waste management option. Partitioning and transmutation (P and T) is a complex technology i.e. advanced reprocessing, and demand transuranics fuel fabrication plants, as well as innovative and/or dedicated transmutation reactors. In addition to U, Pu, and 129 I, 'partitioning' extracts from the liquid high level waste the minor actinides (MA) and the long-lived fission products (LLFP) 99-Tc, 93-Zr, 135-Cs, 107-Pd, and 79-Se). 'Transmutation' requires fully new fuel fabrication plants and reactor technologies to be developed and implemented on industrial scale. Present LWRs are not suited for MA and LLFP transmutation (safety consideration, plant operation, poor incineration capability). Only specially licensed LWRs can cope with MOX fuel; for increased Pu loadings (up to 100%), special reactor designs (e.g., ABB80+) are required; a combination of these reactor types could allow Pu inventory stabilization. Long-term waste radiotoxicity can be effectively reduced only if transuranics are 'incinerated' through fission with very hard neutron spectra. New reactor concepts (dedicated fast reactors, Accelerator Driven Systems (ADS), fusion/fission hybrid reactors) have been proposed as transmuters/incinerators. Significant Pu+MAs incineration rates can be achieved in symbiotic scenarios: LWR-MOX and dedicated fast reactors; fast neutron spectrum ADS mainly for MA incineration; very high thermal flux ADS concepts could also provide a significant transuranics

The demand-side innovation policies in the context of small EU member country. Nõudluspoolsed innovatsioonipoliitikad Euroopa Liidu väikese liikmesriigi kontekstis

Directory of Open Access Journals (Sweden)

Tõnu Roolaht

2013-01-01

Full Text Available Demand-side innovation policies, in the form of regulations, public procurement, subsidies for private demand, and other measures, are often viewed as valuable additions to more traditional supply-side policies. The demand-side innovation policies should enable to facilitate the emergence of vital and sustainable links between innovation outputs and various markets. However, without sufficient institutional framework and policy experiences such measures could also contribute to new market distortions or crowding-out effects, which do not facilitate sustainable growth in innovations. The charting of possible risks of such policies should help to outline the criteria for aiming at sustainable effects. The purpose of this contribution is to offer suggestions about preconditions and policy characteristics, which should help to avoid the misuse of demand-side measures and facilitate the sustainability of desired changes in society. It is predominantly conceptual contribution but draws also extensively on case evidence about the effects of relevant policies and their discontinuation

Multi-objective demand side scheduling considering the operational safety of appliances

International Nuclear Information System (INIS)

Du, Y.F.; Jiang, L.; Li, Y.Z.; Counsell, J.; Smith, J.S.

2016-01-01

Highlights: • Operational safety of appliances is introduced in multi-objective scheduling. • Relationships between operational safety and other objectives are investigated. • Adopted Pareto approach is compared with Weigh and Constraint approaches. • Decision making of Pareto approach is proposed for final appliances’ scheduling. - Abstract: The safe operation of appliances is of great concern to users. The safety risk increases when the appliances are in operation during periods when users are not at home or when they are asleep. In this paper, multi-objective demand side scheduling is investigated with consideration to the appliances’ operational safety together with the electricity cost and the operational delay. The formulation of appliances’ operational safety is proposed based on users’ at-home status and awake status. Then the relationships between the operational safety and the other two objectives are investigated through the approach of finding the Pareto-optimal front. Moreover, this approach is compared with the Weigh and Constraint approaches. As the Pareto-optimal front consists of a set of optimal solutions, this paper proposes a method to make the final scheduling decision based on the relationships among the multiple objectives. Simulation results demonstrate that the operational safety is improved with the sacrifice of the electricity cost and the operational delay, and that the approach of finding the Pareto-optimal front is effective in presenting comprehensive optimal solutions of the multi-objective demand side scheduling.

Review of options for managing iodine-125 wastes

International Nuclear Information System (INIS)

Lock, P.J.; Wakerley, M.W.

1991-01-01

Data on the nature, radioactive content and management options used for I-125 wastes that are produced in England and Wales and fall within the provisions of the Radioactive Substances Act 1960 have been collated. The options for, and impacts of the disposal of these wastes have been reviewed and discussed. In addition storage for decay has been reviewed. The necessary storage requirements and methods of storage for the various waste forms have been examined. Conclusions are drawn with respect to the potential/suitability of the various waste management options. (author)

Demand Response Spinning Reserve Demonstration

Energy Technology Data Exchange (ETDEWEB)

Eto, Joseph H.; Nelson-Hoffman, Janine; Torres, Carlos; Hirth,Scott; Yinger, Bob; Kueck, John; Kirby, Brendan; Bernier, Clark; Wright,Roger; Barat, A.; Watson, David S.

2007-05-01

The Demand Response Spinning Reserve project is a pioneeringdemonstration of how existing utility load-management assets can providean important electricity system reliability resource known as spinningreserve. Using aggregated demand-side resources to provide spinningreserve will give grid operators at the California Independent SystemOperator (CAISO) and Southern California Edison (SCE) a powerful, newtool to improve system reliability, prevent rolling blackouts, and lowersystem operating costs.

Balancing supply and demand resources

International Nuclear Information System (INIS)

Sinha, J.; Saleeby, R.G.

1990-01-01

This article deals with using demand-side management (DSM) resources as an effective means of balancing supply and demand as a part of least-cost planning. The authors present a more sophisticated application of the load forecast adjustment method that reduces the number of DSM programs that need to be evaluated and provides blocks large enough to eliminate resolution problems in production costing models

Options analysis of managed care contracting and regulation: theory and evidence.

Science.gov (United States)

McLean, R A; Magiera, F T

2000-08-01

Managed care contracts can be represented as bundles of options. In particular, the managed care provider is short a call option. To hedge the risk involved in such contracts, managed care contractors can construct several types of virtual put options, among them the ownership of facilities. Agency theory and options theory suggest that for-profit managed care plans, in the presence of debt, will engage in less hedging activity than will other managed care plans. Here, the authors test that hypothesis, using data for Florida HMOs in 1995, and they reject the null hypothesis. That managed care organizations act as if they are short a call option raises interesting regulatory issues, including the possibility of using a hedge-based regulatory scheme in place of a net-worth-based scheme.

Decisions on Energy Demand Response Option Contracts in Smart Grids Based on Activity-Based Costing and Stochastic Programming

Directory of Open Access Journals (Sweden)

Alfred J. Hildreth

2013-01-01

Full Text Available Smart grids enable a two-way energy demand response capability through which a utility company offers its industrial customers various call options for energy load curtailment. If a customer has the capability to accurately determine whether to accept an offer or not, then in the case of accepting an offer, the customer can earn both an option premium to participate, and a strike price for load curtailments if requested. However, today most manufacturing companies lack the capability to make the correct contract decisions for given offers. This paper proposes a novel decision model based on activity-based costing (ABC and stochastic programming, developed to accurately evaluate the impact of load curtailments and determine as to whether or not to accept an energy load curtailment offer. The proposed model specifically targets state-transition flexible and Quality-of-Service (QoS flexible energy use activities to reduce the peak energy demand rate. An illustrative example with the proposed decision model under a call-option based energy demand response scenario is presented. As shown from the example results, the proposed decision model can be used with emerging smart grid opportunities to provide a competitive advantage to the manufacturing industry.

Satisfying the Energy Demand of a Rural Area by Considering the Investment on Renewable Energy Alternatives and Depreciation Costs

Directory of Open Access Journals (Sweden)

Masoud Rabbani

2014-01-01

Full Text Available In this paper, a fuzzy multiobjective model which chooses the best mix of renewable energy options and determines the optimal amount of energy to be transferred from each resource to each end use is proposed. The depreciation of equipment along with time value of money has been taken into account in the first objective function while the second and the third objective functions minimize the greenhouse gas emissions and water consumption, respectively. Also, this study is one of the pioneer works that has considered demand-side management (DSM as a competitive option against supply-side alternatives for making apt energy planning decisions. Moreover, the intrinsic uncertainty of demand parameter is considered and modeled by fuzzy numbers. To convert the proposed fuzzy multiobjective formulation to a crisp single-objective formulation the well-known fuzzy goal programming approach together with Jimenez defuzzifying technique is employed. The model is validated through setting up a diversity of datasets whose data were mostly derived from the literature. The obtained results show that DSM programs have greatly contributed to cost reductions in the network. Also, it is concluded that the model is capable of solving even large-scaled instances of problems in negligible central processing unit (CPU times using Lingo 8.0 software.

Reconciling biofuels, sustainability and commodities demand. Pitfalls and policy options

International Nuclear Information System (INIS)

Uslu, A.; Bole, T.; Londo, M.; Pelkmans, L.; Berndes, G.; Prieler, S.; Fischer, G.; Cueste Cabal, H.

2010-06-01

also demanded by other sectors, particularly the energy sector to produce renewable electricity and heat, and the forest-based industries to produce wood products. Yet, policy support and initiatives can stimulate the synergies between the stationary energy sector and biofuels and the forest industry can include biofuels among the wide range of products already produced. One possible option is to stimulate supply side development by promoting dedicated biomass plantations to achieve learning and cost reduction in the production of short rotation woody plants and perennial herbaceous plants. This can for instance be done by linking credits for green electricity from co-firing applications with the requirement that a certain share of the biomass fuel is derived from production of such plants within EU. The integration of gasification-based biofuel plants in district heating systems is one option for increasing the energy efficiency and improving the economic competitiveness of such biofuels. Integration initiatives may involve cooperation between actors that earlier have not invested in biofuel production, such as municipalities having large district heating networks and power companies that see new opportunities for optimizing their production and improving resource use efficiency. In an increasingly globalized economy, decreasing negative impacts of biofuels on commodity markets and the environment require not only integration of various policy domains but also strategies that are internationally recognized. The early stimulation and learning in new biomass supply systems and the involvement of new types of actors cooperating in biofuel production can facilitate a positive development by reducing strains between sectors and offering opportunities for improving economic and resource use efficiency.

Mixed Waste Management Options: 1995 Update. National Low-Level Waste Management Program

Energy Technology Data Exchange (ETDEWEB)

Kirner, N.; Kelly, J.; Faison, G.; Johnson, D. [Foster Wheeler Environmental Corp. (United States)

1995-05-01

In the original mixed Waste Management Options (DOE/LLW-134) issued in December 1991, the question was posed, ``Can mixed waste be managed out of existence?`` That study found that most, but not all, of the Nation`s mixed waste can theoretically be managed out of existence. Four years later, the Nation is still faced with a lack of disposal options for commercially generated mixed waste. However, since publication of the original Mixed Waste Management Options report in 1991, limited disposal capacity and new technologies to treat mixed waste have become available. A more detailed estimate of the Nation`s mixed waste also became available when the US Environmental Protection Agency (EPA) and the US Nuclear Regulatory Commission (NRC) published their comprehensive assessment, titled National Profile on Commercially Generated Low-Level Radioactive Mixed Waste (National Profile). These advancements in our knowledge about mixed waste inventories and generation, coupled with greater treatment and disposal options, lead to a more applied question posed for this updated report: ``Which mixed waste has no treatment option?`` Beyond estimating the volume of mixed waste requiring jointly regulated disposal, this report also provides a general background on the Atomic Energy Act (AEA) and the Resource Conservation and Recovery Act (RCRA). It also presents a methodical approach for generators to use when deciding how to manage their mixed waste. The volume of mixed waste that may require land disposal in a jointly regulated facility each year was estimated through the application of this methodology.

Mixed Waste Management Options: 1995 Update. National Low-Level Waste Management Program

International Nuclear Information System (INIS)

Kirner, N.; Kelly, J.; Faison, G.; Johnson, D.

1995-05-01

In the original mixed Waste Management Options (DOE/LLW-134) issued in December 1991, the question was posed, ''Can mixed waste be managed out of existence?'' That study found that most, but not all, of the Nation's mixed waste can theoretically be managed out of existence. Four years later, the Nation is still faced with a lack of disposal options for commercially generated mixed waste. However, since publication of the original Mixed Waste Management Options report in 1991, limited disposal capacity and new technologies to treat mixed waste have become available. A more detailed estimate of the Nation's mixed waste also became available when the US Environmental Protection Agency (EPA) and the US Nuclear Regulatory Commission (NRC) published their comprehensive assessment, titled National Profile on Commercially Generated Low-Level Radioactive Mixed Waste (National Profile). These advancements in our knowledge about mixed waste inventories and generation, coupled with greater treatment and disposal options, lead to a more applied question posed for this updated report: ''Which mixed waste has no treatment option?'' Beyond estimating the volume of mixed waste requiring jointly regulated disposal, this report also provides a general background on the Atomic Energy Act (AEA) and the Resource Conservation and Recovery Act (RCRA). It also presents a methodical approach for generators to use when deciding how to manage their mixed waste. The volume of mixed waste that may require land disposal in a jointly regulated facility each year was estimated through the application of this methodology

Enabling technologies for demand management: Transport

International Nuclear Information System (INIS)

Smith, Roderick A.

2008-01-01

Rising transport demand is likely to be the biggest hurdle to reducing our greenhouse gas emissions. Globally and nationally, transport is consuming an ever increasing share of our total energy use. Furthermore, the bulk of energy used in transport comes from the burning of petroleum products. This brief paper summarises options arising from the two routes to reduce energy demand in transport: improved and more efficient use of existing and possible new transport modes, and the reduction of transport demand. In both areas, the prospects in the immediate and longer-term future are hedged with difficulties. Automobiles and aircraft have improved considerably in recent decades, but future improvements are likely to be incremental. The introduction of hydrogen as a fuel is appealing, but there are technical problems to be solved. Active reduction of demand for transport will require a decoupling of the link between demand and growth in gross domestic product. Globally, this will be very difficult to achieve. Various modes of public transport exist that are efficient in terms of their energy use per passenger kilometre. But they need large investments to make them more attractive than the automobile. However, population concentration in mega-cities, allied with congestion, will make such innovation essential. Policy measures can be assisted in their implementation by new technology, but will remain politically problematic

Smart grids, demand-side management and decentralised electricity production: Mounting a national R and D programme

International Nuclear Information System (INIS)

2010-01-01

of investment RTE, ERDF and EDF-R and D dispose of teams that can identify future R and D needs, pilot and conduct research, and integrate the results, often obtained in collaboration with other parties, in innovative demonstration projects set up by operators. This is no longer the case for many of their European counterparts where research teams have shrunk to a minimum, following cost-cutting decisions and 'rationalisation' of grid activities (decisions made on the basis of short-term business policies, often encouraged by regulators 3). These encouraging observations notwithstanding, transmission and distribution grid operators in France consider that they must acquire further knowledge pertaining to the sizing and operation of electricity networks. Five policy options underlie this vision extending to 2020, a vision aimed at validating new directions for the evolution of these networks: 1 - Strengthen the capacity of the transmission grid to integrate an energy bouquet that complies with European commitments for de-carbonising electricity generation, via the development of renewable energy, 2 - Make the distribution grid flexible and reliable enough to meet the consumer demand and the requirements of energy service vendors, 3 - Coordinate interaction between transmission operators and distributors so as to reinforce the reliability of the grid in France, optimise its energy performance and contribute to building the single electricity market in Europe, 4 - Encourage electricity demand management as an additional source of supply and economic competitiveness, 5 - Expand decentralised generation, particularly to help further reduce energy demand in commercial and residential buildings

Increasing access to institutional deliveries using demand and supply side incentives: early results from a quasi-experimental study

Directory of Open Access Journals (Sweden)

Serwadda David

2011-03-01

Full Text Available Abstract Background Geographical inaccessibility, lack of transport, and financial burdens are some of the demand side constraints to maternal health services in Uganda, while supply side problems include poor quality services related to unmotivated health workers and inadequate supplies. Most public health interventions in Uganda have addressed only selected supply side issues, and universities have focused their efforts on providing maternal services at tertiary hospitals. To demonstrate how reforms at Makerere University College of Health Sciences (MakCHS can lead to making systemic changes that can improve maternal health services, a demand and supply side strategy was developed by working with local communities and national stakeholders. Methods This quasi-experimental trial is conducted in two districts in Eastern Uganda. The supply side component includes health worker refresher training and additions of minimal drugs and supplies, whereas the demand side component involves vouchers given to pregnant women for motorcycle transport and the payment to service providers for antenatal, delivery, and postnatal care. The trial is ongoing, but early analysis from routine health information systems on the number of services used is presented. Results Motorcyclists in the community organized themselves to accept vouchers in exchange for transport for antenatal care, deliveries and postnatal care, and have become actively involved in ensuring that women obtain care. Increases in antenatal, delivery, and postnatal care were demonstrated, with the number of safe deliveries in the intervention area immediately jumping from Conclusions Transport and service vouchers appear to be a viable strategy for rapidly increasing maternal care. MakCHS can design strategies together with stakeholders using a learning-by-doing approach to take advantage of community resources.

Demand management in Multi-Stage Distribution Chain

NARCIS (Netherlands)

de Kok, T.; Janssen, F.B.S.L.P.

1996-01-01

In this paper we discuss demand management problems in a multi-stage distribution chain.We focus on distribution chains where demand processes have high variability due to a few large customer orders.We give a possible explanation, and suggest two simple procedures that help to smooth demand.It is

Institutions for Effective Water Demand Management

International Development Research Centre (IDRC) Digital Library (Canada)

2010-12-14

Dec 14, 2010 ... The paper also describes the state of South African WDM to highlight ... Download the PDF: Working Paper 4: Institutions for Effective Water Demand Management ​ ... Managing flood risk through collaborative governance.

Demand management implementation in Southeast Asia

Energy Technology Data Exchange (ETDEWEB)

Tanaboriboon, Y.

1995-12-31

The need to apply transportation system management, to developing countries is urgent. Attempts to alleviate severe traffic congestion in their metropolises have so far failed to provide adequate solutions. The countries are faced with many difficulties because of the lack of sufficient financial resources together with their complex internal administrative and political problems. They are incapable of providing sufficient road space to cope with the escalating demand in private automobiles. This has led to excessive delays in urban traveling, environmental pollution problems, decline of road-based public transit services and deterioration of the quality of life in these metropolises. Demand management, in use for decades in the Western world, has also been recognized in Singapore`s famous area licensing scheme (ALS) making other Southeast Asian Metropolises aware of its advantages as an alternative in solving their chaotic traffic problems. However, realization is far different from implementation and still many metropolises are not able to apply the technique. Singapore and Thailand, two leaders among many other Southeast Asian regions in economics, tourism, trade and industry handle their problems far differently, especially the traffic congestion problem. While a number of demand management schemes have been implemented successfully in Singapore since 1975, Bangkok is still struggling to implement such measures to alleviate severe traffic congestion problems. This article intends to high light the successful practices and unsuccessful attempts of demand management techniques applied in Singapore and Bangkok.

A multi-criteria decision analysis assessment of waste paper management options

Energy Technology Data Exchange (ETDEWEB)

Hanan, Deirdre [Department of Design, Development, Environment and Materials, The Open University, Walton Hall, Milton Keynes, MK7 6AA (United Kingdom); Burnley, Stephen, E-mail: s.j.burnley@open.ac.uk [Department of Design, Development, Environment and Materials, The Open University, Walton Hall, Milton Keynes, MK7 6AA (United Kingdom); Cooke, David [Department of Design, Development, Environment and Materials, The Open University, Walton Hall, Milton Keynes, MK7 6AA (United Kingdom)

2013-03-15

Highlights: ► Isolated communities have particular problems in terms of waste management. ► An MCDA tool allowed a group of non-experts to evaluate waste management options. ► The group preferred local waste management solutions to export to the mainland. ► Gasification of paper was the preferred option followed by recycling. ► The group concluded that they could be involved in the decision making process. - Abstract: The use of Multi-criteria Decision Analysis (MCDA) was investigated in an exercise using a panel of local residents and stakeholders to assess the options for managing waste paper on the Isle of Wight. Seven recycling, recovery and disposal options were considered by the panel who evaluated each option against seven environmental, financial and social criteria. The panel preferred options where the waste was managed on the island with gasification and recycling achieving the highest scores. Exporting the waste to the English mainland for incineration or landfill proved to be the least preferred options. This research has demonstrated that MCDA is an effective way of involving community groups in waste management decision making.

A multi-criteria decision analysis assessment of waste paper management options

International Nuclear Information System (INIS)

Hanan, Deirdre; Burnley, Stephen; Cooke, David

2013-01-01

Highlights: ► Isolated communities have particular problems in terms of waste management. ► An MCDA tool allowed a group of non-experts to evaluate waste management options. ► The group preferred local waste management solutions to export to the mainland. ► Gasification of paper was the preferred option followed by recycling. ► The group concluded that they could be involved in the decision making process. - Abstract: The use of Multi-criteria Decision Analysis (MCDA) was investigated in an exercise using a panel of local residents and stakeholders to assess the options for managing waste paper on the Isle of Wight. Seven recycling, recovery and disposal options were considered by the panel who evaluated each option against seven environmental, financial and social criteria. The panel preferred options where the waste was managed on the island with gasification and recycling achieving the highest scores. Exporting the waste to the English mainland for incineration or landfill proved to be the least preferred options. This research has demonstrated that MCDA is an effective way of involving community groups in waste management decision making

An Economic Evalution of Demand-side Energy Storage Systems by using a Multi-agent based Electricity Market

Science.gov (United States)

Furusawa, Ken; Sugihara, Hideharu; Tsuji, Kiichiro

Opened wholesale electric power market in April 2005, deregulation of electric power industry in Japan has faced a new competitive environment. In the new environment, Independent Power Producer (: IPP), Power Producer and Supplier (: PPS), Load Service Entity (: LSE) and electric utility can trade electric energy through both bilateral contracts and single-price auction at the electricity market. In general, the market clearing price (: MCP) is largely changed by amount of total load demand in the market. The influence may cause price spike, and consequently the volatility of MCP will make LSEs and their customers to face a risk of revenue and cost. DSM is attracted as a means of load leveling, and has effect on decreasing MCP at peak load period. Introducing Energy Storage systems (: ES) is one of DSM in order to change demand profile at customer-side. In case that customers decrease their own demand at jumped MCP, a bidding strategy of generating companies may be changed their strategy. As a result, MCP is changed through such complex mechanism. In this paper the authors evaluate MCP by multi-agent. It is considered that customer-side ES has an effect on MCP fluctuation. Through numerical examples, this paper evaluates the influence on MCP by controlling customer-side ES corresponding to variation of MCP.

Carbon footprint and energy use of food waste management options for fresh fruit and vegetables from supermarkets.

Science.gov (United States)

Eriksson, Mattias; Spångberg, Johanna

2017-02-01

Food waste is a problem with economic, environmental and social implications, making it both important and complex. Previous studies have addressed food waste management options at the less prioritised end of the waste hierarchy, but information on more prioritised levels is also needed when selecting the best available waste management options. Investigating the global warming potential and primary energy use of different waste management options offers a limited perspective, but is still important for validating impacts from the waste hierarchy in a local context. This study compared the effect on greenhouse gas emissions and primary energy use of different food waste management scenarios in the city of Växjö, Sweden. A life cycle assessment was performed for four waste management scenarios (incineration, anaerobic digestion, conversion and donation), using five food products (bananas, tomatoes, apples, oranges and sweet peppers) from the fresh fruit and vegetables department in two supermarkets as examples when treated as individual waste streams. For all five waste streams, the established waste hierarchy was a useful tool for prioritising the various options, since the re-use options (conversion and donation) reduced the greenhouse gas emissions and the primary energy use to a significantly higher degree than the energy recovery options (incineration and anaerobic digestion). The substitution of other products and services had a major impact on the results in all scenarios. Re-use scenarios where food was replaced therefore had much higher potential to reduce environmental impact than the energy recovery scenarios where fossil fuel was replaced. This is due to the high level of resources needed to produce food compared with production of fossil fuels, but also to fresh fruit and vegetables having a high water content, making them inefficient as energy carriers. Waste valorisation measures should therefore focus on directing each type of food to the waste

Criteria for demand response systems

NARCIS (Netherlands)

Lampropoulos, I.; Kling, W.L.; Bosch, van den P.P.J.; Ribeiro, P.F.; Berg, van den J.

2013-01-01

The topic of demand side management is currently becoming more important than ever, in parallel with the further deregulation of the electricity sector, and the increasing integration of renewable energy sources. A historical review of automation integration in power system control assists in

Managing Chemotherapy Side Effects: Constipation

Science.gov (United States)

N ational C ancer I nstitute Managing Chemotherapy Side Effects Constipation Take these steps: Eat high-fiber foods such as: ● ● Whole-grain breads and cereals ● ● Fruits and vegetables ● ● Nuts and seeds Turn this ...

Increasing access to institutional deliveries using demand and supply side incentives: early results from a quasi-experimental study.

Science.gov (United States)

Ekirapa-Kiracho, Elizabeth; Waiswa, Peter; Rahman, M Hafizur; Makumbi, Fred; Kiwanuka, Noah; Okui, Olico; Rutebemberwa, Elizeus; Bua, John; Mutebi, Aloysius; Nalwadda, Gorette; Serwadda, David; Pariyo, George W; Peters, David H

2011-03-09

Geographical inaccessibility, lack of transport, and financial burdens are some of the demand side constraints to maternal health services in Uganda, while supply side problems include poor quality services related to unmotivated health workers and inadequate supplies. Most public health interventions in Uganda have addressed only selected supply side issues, and universities have focused their efforts on providing maternal services at tertiary hospitals. To demonstrate how reforms at Makerere University College of Health Sciences (MakCHS) can lead to making systemic changes that can improve maternal health services, a demand and supply side strategy was developed by working with local communities and national stakeholders. This quasi-experimental trial is conducted in two districts in Eastern Uganda. The supply side component includes health worker refresher training and additions of minimal drugs and supplies, whereas the demand side component involves vouchers given to pregnant women for motorcycle transport and the payment to service providers for antenatal, delivery, and postnatal care. The trial is ongoing, but early analysis from routine health information systems on the number of services used is presented. Motorcyclists in the community organized themselves to accept vouchers in exchange for transport for antenatal care, deliveries and postnatal care, and have become actively involved in ensuring that women obtain care. Increases in antenatal, delivery, and postnatal care were demonstrated, with the number of safe deliveries in the intervention area immediately jumping from Voucher revenues have been used to obtain needed supplies to improve quality and to pay health workers, ensuring their availability at a time when workloads are increasing. Transport and service vouchers appear to be a viable strategy for rapidly increasing maternal care. MakCHS can design strategies together with stakeholders using a learning-by-doing approach to take advantage of

When the 'soft-path' gets hard: demand management and financial instability for water utilities

Science.gov (United States)

Zeff, H. B.; Characklis, G. W.

2014-12-01

In the past, cost benefit analysis (CBA) has been viewed as an effective means of evaluating water utility strategies, particularly those that were dependent on the construction of new supply infrastructure. As water utilities have begun to embrace 'soft-path' approaches as a way to reduce the need for supply-centric development, CBA fails to recognize some important financial incentives affected by reduced water consumption. Demand management, both as a short-term response to drought and in longer-term actions to accommodate demand growth, can introduce revenue risks that adversely affect a utility's ability to repay debt, re-invest in aging infrastructure, or maintain reserve funds for use in a short-term emergency. A utility that does not generate sufficient revenue to support these functions may be subject to credit rating downgrades, which in turn affect the interest rate it pays on its debt. Interest rates are a critical consideration for utility managers in the capital-intensive water sector, where debt payments for infrastructure often account for a large portion of a utility's overall costs. Even a small increase in interest rates can add millions of dollars to the cost of new infrastructure. Recent studies have demonstrated that demand management techniques can lead to significant revenue variability, and credit rating agencies have begun to take notice of drought response plans when evaluating water utility credit ratings, providing utilities with a disincentive to fully embrace soft-path approaches. This analysis examines the impact of demand management schemes on key credit rating metrics for a water utility in Raleigh, North Carolina. The utility's consumer base is currently experiencing rapid population growth, and demand management has the potential to reduce the dependence on costly new supply infrastructure but could lead to financial instability that will significantly increase the costs of financing future projects. This work analyzes how 'soft

Flexible Demand Management under Time-Varying Prices

Science.gov (United States)

Liang, Yong

In this dissertation, the problem of flexible demand management under time-varying prices is studied. This generic problem has many applications, which usually have multiple periods in which decisions on satisfying demand need to be made, and prices in these periods are time-varying. Examples of such applications include multi-period procurement problem, operating room scheduling, and user-end demand scheduling in the Smart Grid, where the last application is used as the main motivating story throughout the dissertation. The current grid is experiencing an upgrade with lots of new designs. What is of particular interest is the idea of passing time-varying prices that reflect electricity market conditions to end users as incentives for load shifting. One key component, consequently, is the demand management system at the user-end. The objective of the system is to find the optimal trade-off between cost saving and discomfort increment resulted from load shifting. In this dissertation, we approach this problem from the following aspects: (1) construct a generic model, solve for Pareto optimal solutions, and analyze the robust solution that optimizes the worst-case payoffs, (2) extend to a distribution-free model for multiple types of demand (appliances), for which an approximate dynamic programming (ADP) approach is developed, and (3) design other efficient algorithms for practical purposes of the flexible demand management system. We first construct a novel multi-objective flexible demand management model, in which there are a finite number of periods with time-varying prices, and demand arrives in each period. In each period, the decision maker chooses to either satisfy or defer outstanding demand to minimize costs and discomfort over a certain number of periods. We consider both the deterministic model, models with stochastic demand or prices, and when only partial information about the stochastic demand or prices is known. We first analyze the stochastic

How to optimize tourism destination supply: A case in Shanghai from perspective of supplier and demand side perception

Science.gov (United States)

Xue, Huaju; Fang, Chengjiang

2018-02-01

It is vital to assess the regional tourist supply capability by suppliers and demand groups. The supply side’s evaluation of the regional supply capacity determines the direction of the supply investment in future, the demand side’s evaluation indicates their satisfaction degree of the destination supply and also effects their revisit the tourism destination. Therefore, the assessment of the supply and demand sides is an important reference for the reform of destination supply side, which helps us find the shortage of the destination supply factors and optimize tourism destination supply promptly. This paper through investigating tourism supply and demand groups in Shanghai, used the survey data and constructed tourism supply optimization model, analyzed the current situation of tourism supply factors in Shanghai. Results showed that the environment of Shanghai should be improved first, including improving urban air and water quality, up-grading public sanitation and increasing urban green coverage. Other supply factors improved priority were information and marketing, we should improve the information consultation of scenic spots, increase the intensity of tourism promotion and provide more free travel publicity brochures.

Economic analysis of emerald ash borer (Coleoptera: Buprestidae) management options.

Science.gov (United States)

Vannatta, A R; Hauer, R H; Schuettpelz, N M

2012-02-01

Emerald ash borer, Agrilus planipennis (Fairmaire) (Coleoptera: Buprestidae), plays a significant role in the health and extent of management of native North American ash species in urban forests. An economic analysis of management options was performed to aid decision makers in preparing for likely future infestations. Separate ash tree population valuations were derived from the i-Tree Streets program and the Council of Tree and Landscape Appraisers (CTLA) methodology. A relative economic analysis was used to compare a control option (do-nothing approach, only removing ash trees as they die) to three distinct management options: 1) preemptive removal of all ash trees over a 5 yr period, 2) preemptive removal of all ash trees and replacement with comparable nonash trees, or 3) treating the entire population of ash trees with insecticides to minimize mortality. For each valuation and management option, an annual analysis was performed for both the remaining ash tree population and those lost to emerald ash borer. Retention of ash trees using insecticide treatments typically retained greater urban forest value, followed by doing nothing (control), which was better than preemptive removal and replacement. Preemptive removal without tree replacement, which was the least expensive management option, also provided the lowest net urban forest value over the 20-yr simulation. A "no emerald ash borer" scenario was modeled to further serve as a benchmark for each management option and provide a level of economic justification for regulatory programs aimed at slowing the movement of emerald ash borer.

Efficient Trajectory Options Allocation for the Collaborative Trajectory Options Program

Science.gov (United States)

Rodionova, Olga; Arneson, Heather; Sridhar, Banavar; Evans, Antony

2017-01-01

The Collaborative Trajectory Options Program (CTOP) is a Traffic Management Initiative (TMI) intended to control the air traffic flow rates at multiple specified Flow Constrained Areas (FCAs), where demand exceeds capacity. CTOP allows flight operators to submit the desired Trajectory Options Set (TOS) for each affected flight with associated Relative Trajectory Cost (RTC) for each option. CTOP then creates a feasible schedule that complies with capacity constraints by assigning affected flights with routes and departure delays in such a way as to minimize the total cost while maintaining equity across flight operators. The current version of CTOP implements a Ration-by-Schedule (RBS) scheme, which assigns the best available options to flights based on a First-Scheduled-First-Served heuristic. In the present study, an alternative flight scheduling approach is developed based on linear optimization. Results suggest that such an approach can significantly reduce flight delays, in the deterministic case, while maintaining equity as defined using a Max-Min fairness scheme.

Improving the cost effectiveness of financial incentives in managing travel demand management (TDM).

Science.gov (United States)

2013-10-01

Providing financial incentives to commuters to use alternative modes is a common element of managing transportation demand. Although these incentives have become common during the past two decades as elements of transportation demand management (TDM)...

Supply side energy management for sustainable energy ( development in Pakistan

International Nuclear Information System (INIS)

Uqaili, M.A.; Harijan, K.; Memon, M.

2005-01-01

Pakistan is an energy deficient country. Indigenous reserves of oil and gas are limited and the country heavily depends on imported energy. The indigenous coal is of poor quality. Environmental pollution and greenhouse gas emissions from energy use are becoming significant environmental issues in the country. Sustainability is regarded as a major consideration for both urban and rural development in Pakistan. People in the country have been exploiting the natural resources with no consideration to the effects-both short term (environmental) and long term (resource crunch). The urban areas of the country depend to a large extent on commercial energy sources. The rural areas use non-commercial sources like firewood, agricultural wastes and animal dung. Even this is decreasing over the years, with the villagers wanting to adopt the ready to use sophisticated technology. The debate now is to identify a suitable via media. The option that fills this gap aptly is the renewable energy source. This paper analyses the supply side management of energy resources in relation to sustainable energy development. The present study shows that for achieving long-term environmental sustainable development, renewable energy is the major option that could meet the growing energy needs in Pakistan. (author)

Demonstrating a small utility approach to demand-side program implementation

International Nuclear Information System (INIS)

1991-01-01

The US DOE awarded a grant to the Burlington Electric Department (B.E.D.) to test a demand-side management (DSM) demonstration program designed to quickly save a significant amount of power with little disruption to the utility's customers or its normal operations. B.E.D. is a small municipal utility located in northern Vermont, with a lengthy history of successful DSM involvement. In our grant application, we proposed to develop a replicable program and approach to DSM that might be useful to other small utilities and to write a report to enable such replication. We believe that this DSM program and/or individual program components are replicable. This report is designed to allow other utilities interested in DSM to replicate this program or specific program design features to meet their DSM goals. We also wanted to use the opportunity of this grant to test the waters of residential heating fuel-switching. We hoped to test the application of one fuel-switching technology, and to benefit from the lessons learned in developing a full-scale DSM program for this end- use. To this end the pilot effort has been very successful. In the pilot pressure we installed direct-vent gas fired space heaters sized as supplemental heating units in 44 residences heated solely by electric resistance heat. We installed the gas space heating units at no cost to the owners or residents. We surveyed participating customers. The results of those surveys are included in this report and preliminary estimates of winter peak capacity load reductions are also noted in this report

Demonstrating a small utility approach to demand-side program implementation

Energy Technology Data Exchange (ETDEWEB)

1991-10-01

The US DOE awarded a grant to the Burlington Electric Department (B.E.D.) to test a demand-side management (DSM) demonstration program designed to quickly save a significant amount of power with little disruption to the utility's customers or its normal operations. B.E.D. is a small municipal utility located in northern Vermont, with a lengthy history of successful DSM involvement. In our grant application, we proposed to develop a replicable program and approach to DSM that might be useful to other small utilities and to write a report to enable such replication. We believe that this DSM program and/or individual program components are replicable. This report is designed to allow other utilities interested in DSM to replicate this program or specific program design features to meet their DSM goals. We also wanted to use the opportunity of this grant to test the waters of residential heating fuel-switching. We hoped to test the application of one fuel-switching technology, and to benefit from the lessons learned in developing a full-scale DSM program for this end- use. To this end the pilot effort has been very successful. In the pilot pressure we installed direct-vent gas fired space heaters sized as supplemental heating units in 44 residences heated solely by electric resistance heat. We installed the gas space heating units at no cost to the owners or residents. We surveyed participating customers. The results of those surveys are included in this report and preliminary estimates of winter peak capacity load reductions are also noted in this report.

Demand Management Based on Model Predictive Control Techniques

Directory of Open Access Journals (Sweden)

Yasser A. Davizón

2014-01-01

Full Text Available Demand management (DM is the process that helps companies to sell the right product to the right customer, at the right time, and for the right price. Therefore the challenge for any company is to determine how much to sell, at what price, and to which market segment while maximizing its profits. DM also helps managers efficiently allocate undifferentiated units of capacity to the available demand with the goal of maximizing revenue. This paper introduces control system approach to demand management with dynamic pricing (DP using the model predictive control (MPC technique. In addition, we present a proper dynamical system analogy based on active suspension and a stability analysis is provided via the Lyapunov direct method.

Shungnak Energy Configuration Options.

Energy Technology Data Exchange (ETDEWEB)

Rosewater, David Martin [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Eddy, John P. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-10-01

Power systems in rural Alaska villages face a unique combination of challenges that can increase the cost of energy and lowers energy supply reliability. In the case of the remote village of Shungnak, diesel and heating fuel is either shipped in by barge or flown in by aircraft. This report presents a technical analysis of several energy infrastructure upgrade and modification options to reduce the amount of fuel consumed by the community of Shungnak. Reducing fuel usage saves money and makes the village more resilient to disruptions in fuel supply. The analysis considers demand side options, such as energy efficiency, alongside the installation of wind and solar power generation options. Some novel approaches are also considered including battery energy storage and the use of electrical home heating stoves powered by renewable generation that would otherwise be spilled and wasted. This report concludes with specific recommendations for Shungnak based on economic factors, and fuel price sensitivity. General conclusions are also included to support future work analyzing similar energy challenges in remote arctic regions.

[Institutional demands and care demands in the management of nurses in an emergency unit].

Science.gov (United States)

Montezelli, Juliana Helena; Peres, Aida Maris; Bernardino, Elizabeth

2011-01-01

To characterize the registered nurse's management activities in an emergency department. Qualitative research, implemented from February to April 2009 by a semi-structured interview with eight nurses from an emergency department at a university hospital in Curitiba, PR. Brazil. The data was submitted to content analyses. Two categories emerged: Management focused on meeting the institutional demands that emphasizes the Registered Nurses' bureaucratic activities required by the hospital; and Management focused on meeting the nursing care demands that prioritizes the care as the main management activity. The study reached its objective and joined the literature findings that the division between care and management does not match with the registered nurse's performance at an emergency department.

Does Knowledge Contribute to the Acceptance of Demand Response?

Directory of Open Access Journals (Sweden)

Salla Annala

2014-03-01

Full Text Available More flexible demand side would benefit the electricity markets, networks and sustainable power generation in many ways. The success of demand response programs, however, relies on consumer acceptance. This paper reviews previous studies about acceptability of different kinds of residential demand response programs. Furthermore, it discusses whether consumers who are more aware of the principles and benefits of demand response have more positive attitudes towards demand response programs. The results of the literature review and two survey studies suggest that price and security of supply are currently bigger motives to change consumption behaviour than environmental issues and that the savings expected to trigger any action (and to lead to lasting change in behaviour may be relatively high. Therefore, the framing of demand response programs goals may affect the acceptance. Additionally, consumers seem to prefer simple price structures that remain constant for a long time to more dynamic options.

Evaluation of flexible demand-side load-following reserves in power systems with high wind generation penetration

NARCIS (Netherlands)

Paterakis, N.G.; Catalao, J.P.S.; Ntomaris, A.V.; Erdinc, O.

2015-01-01

In this study, a two-stage stochastic programming joint energy and reserve day-ahead market structure is proposed in order to procure the required load-following reserves to tackle with wind power production uncertainty. Reserves can be procured both from generation and demand-side. Responsive

Flexible investment under uncertainty in smart distribution networks with demand side response: Assessment framework and practical implementation

International Nuclear Information System (INIS)

Schachter, Jonathan A.; Mancarella, Pierluigi; Moriarty, John; Shaw, Rita

2016-01-01

Classical deterministic models applied to investment valuation in distribution networks may not be adequate for a range of real-world decision-making scenarios as they effectively ignore the uncertainty found in the most important variables driving network planning (e.g., load growth). As greater uncertainty is expected from growing distributed energy resources in distribution networks, there is an increasing risk of investing in too much or too little network capacity and hence causing the stranding and inefficient use of network assets; these costs are then passed on to the end-user. An alternative emerging solution in the context of smart grid development is to release untapped network capacity through Demand-Side Response (DSR). However, to date there is no approach able to quantify the value of ‘smart’ DSR solutions against ‘conventional’ asset-heavy investments. On these premises, this paper presents a general real options framework and a novel probabilistic tool for the economic assessment of DSR for smart distribution network planning under uncertainty, which allows the modeling and comparison of multiple investment strategies, including DSR and capacity reinforcements, based on different cost and risk metrics. In particular the model provides an explicit quantification of the economic value of DSR against alternative investment strategies. Through sensitivity analysis it is able to indicate the maximum price payable for DSR service such that DSR remains economically optimal against these alternatives. The proposed model thus provides Regulators with clear insights for overseeing DSR contractual arrangements. Further it highlights that differences exist in the economic perspective of the regulated DNO business and of customers. Our proposed model is therefore capable of highlighting instances where a particular investment strategy is favorable to the DNO but not to its customers, or vice-versa, and thus aspects of the regulatory framework which may

Erectile dysfunction management options in Nigeria.

Science.gov (United States)

Afolayan, Anthony Jide; Yakubu, Musa Toyin

2009-04-01

In Nigeria, the prevalence of erectile dysfunction (ED) among patients attending primary care clinics, age-standardized to the U.S. population in 2000 is 57.4%. This is considered high enough to warrant the attention of scientist for critical studies and analysis. The high ED prevalence is associated with etiologies such as psychosexual factors, chronic medical conditions, and some lifestyles. ED constitutes a major public health problem, influencing the patient's well-being and quality of life. It also leads to broken homes and marriages, psychological, social, and physical morbidity. To give an account of various ED management options in Nigeria. Review of peer-reviewed literature, questionnaire, and ethnobotanical survey to some indigenous herb sellers and herbalists. Cross cultural perspectives of ED management in Nigeria. The review suggests that traditional (phytotherapy, zootherapy, and occultism) and nontraditional, orthodox practice (drug therapy, psychological, and behavioral counseling) are applicable to ED management in Nigeria. This review should help in creating awareness into various options available for managing ED in the country, but does not recommend self medication of any form, be it the use of orthodox or herbal remedy.

A multi-criteria decision analysis assessment of waste paper management options.

Science.gov (United States)

Hanan, Deirdre; Burnley, Stephen; Cooke, David

2013-03-01

The use of Multi-criteria Decision Analysis (MCDA) was investigated in an exercise using a panel of local residents and stakeholders to assess the options for managing waste paper on the Isle of Wight. Seven recycling, recovery and disposal options were considered by the panel who evaluated each option against seven environmental, financial and social criteria. The panel preferred options where the waste was managed on the island with gasification and recycling achieving the highest scores. Exporting the waste to the English mainland for incineration or landfill proved to be the least preferred options. This research has demonstrated that MCDA is an effective way of involving community groups in waste management decision making. Copyright © 2012 Elsevier Ltd. All rights reserved.

Water Demand Management Policy Brief No

International Development Research Centre (IDRC) Digital Library (Canada)

Bob Stanley

Fair share: Water Demand Management can help provide fair access to water for the poor. Water Policy. Brief no.2 ... management (WDM) can help spread water more equitably, providing a measure of opportunity, security and ... improving health and quality of life for families. WDM measures can improve the efficiency of.

Australia's long-term electricity demand forecasting using deep neural networks

OpenAIRE

Hamedmoghadam, Homayoun; Joorabloo, Nima; Jalili, Mahdi

2018-01-01

Accurate prediction of long-term electricity demand has a significant role in demand side management and electricity network planning and operation. Demand over-estimation results in over-investment in network assets, driving up the electricity prices, while demand under-estimation may lead to under-investment resulting in unreliable and insecure electricity. In this manuscript, we apply deep neural networks to predict Australia's long-term electricity demand. A stacked autoencoder is used in...

Comparative evaluation of radioactive waste management options. Final report

International Nuclear Information System (INIS)

Appel, D.; Kreusch, J.; Neumann, W.

2001-05-01

A comprehensive presentation of the various radioactive waste options under debate has not been made so far, let alone a comparative evaluation of the options with respect to their substantiated or assumed advantages or drawbacks. However, any appropriate discussion about the pros and cons of the specific options for final decision making has to be based on a comprehensive knowledge base drawn from profound comparative evaluation of essential options. Therefore, the study reported in this publication was to serve three major purposes: Presentation of the conditions and waste management policies and approaches in selected countries, in order to compile information about the various policy goals and the full scope of argumentation, as well as the range of individual arguments used for or against specific options. - Derivation of a methodology for evaluation, including development of criteria for a comparative and qualitative evaluation of options. - Identification of possible implications for a waste management strategy for Germany, derived from the results of the comparative evaluation and the examination of the reasonings and argumentation used in the various countries. (orig./CB) [de

Managing Chemotherapy Side Effects: Bleeding Problems

Science.gov (United States)

... C ancer I nstitute Managing Chemotherapy Side Effects Bleeding Problems “My nurse said that chemotherapy could make ... with a clean cloth. Keep pressing until the bleeding stops. If you bruise: Put ice on the ...

Regulatory frameworks for Natural Gas DSM in Canada : exploring design options, influences and characteristics of success

International Nuclear Information System (INIS)

Simon, J.

2005-11-01

There are 6 natural gas distribution companies in Canada with formal, ratepayer-funded demand side management (DSM) programs. However, the general characteristics and regulatory environment of these companies varies greatly. With the exception of Enbridge Gas and Union Gas, each company is located in a different province, which means that companies face different energy regulations and energy efficiency policies. An introduction to DSM and its regulation in Canada was presented, as well as an overview of common models in Canada, and the general considerations involved in designing a regulatory framework were discussed. Regulatory design options for natural gas demand-side management regulatory frameworks were evaluated. The major factors that influence the frameworks were analyzed, and the characteristics of a successful DSM program were outlined. The research methodology for this paper consisted of telephone interviews with policy-makers, regulators, non-governmental organizations and regulatory affairs personnel from local distribution companies. Results indicated the importance of a clear policy framework that provides direction for DSM designers. The common elements for a successful regulatory framework were considered to be a systems approach to the definition of DSM; clear regulatory rules; a long-term predictable source and level of DSM funding that reflected the maturity of the DSM market; an alignment of government energy policies and DSM regulatory frameworks; and recognition and capturing of the broad range of DSM benefits

Measuring and controlling unfairness in decentralized planning of energy demand

NARCIS (Netherlands)

Pournaras, E.; Vasirani, M.; Kooij, R.E.; Aberer, K.

2014-01-01

Demand-side energy management improves robustness and efficiency in Smart Grids. Load-adjustment and load-shifting are performed to match demand to available supply. These operations come at a discomfort cost for consumers as their lifestyle is influenced when they adjust or shift in time their

Low-level radioactive waste management options

International Nuclear Information System (INIS)

Schmalz, R.F.

1989-01-01

This paper discusses the non-technical problems associated with the social and political obstacles to the secure disposal of low level radioactive waste. The author reviews thirty years' experience managing non-military wastes. The merits of available options are considered

Demand Management in E-Fulfillment

NARCIS (Netherlands)

N.A.H. Agatz (Niels)

2009-01-01

textabstractInternet retailers are in a unique position to adjust, in real-time, the product and service offering to the customer and to change the corresponding prices. Although this flexibility provides a vast potential for demand management to enhance profitability, standard practices and models

Demand-side bidding in Brazil; Leilao de eficiencia energetica no Brasil

Energy Technology Data Exchange (ETDEWEB)

Garcia, Agenor Gomes Pinto

2008-01-15

Since the New Electric Sector Model's conception an energy-efficiency auction, like the ones used to buy new energy, was considered. Recently, the subject has been frequently commented in studies and meetings. This thesis discuss the main issues about its implementation in Brazil and proposes a model for this. The first chapter shows the history and the Electric Sector actual frame, with emphasis in the energy planning, resumed after the 2001 electricity shortage, the structure created for the system expansion and analyses the results of the new energy's auctions until now. The second chapter studies how the energy-efficiency auction can affect agents and consumers and presents the auction theory, which is growing fast in recent years, and how it can be applied to the present case, showing the possible agents' behavior - ESCOs, larger consumers and appliance manufacturers, and its implication on the auction shape. The third chapter shows the past world experience in energy-efficiency selling - the USA DSB (demand-side bidding) and its actual results and an IEA (International Energy Agency) study about this market mechanism of energy-efficiency promotion. 'The DSB works but it's not simple' (Geller, 2006) sums up the main conclusion about DSB - it develops the M and V techniques and the ESCO industry, making energy-efficiency as good as new generation for system's growing. The fourth chapter presents a proposal for the energy-efficiency auction's implementation in Brazil - its opportunity, resources source, regional aspects and the steps to get there. The fifth chapter analyses the M and V 's techniques and shows examples of the four options for projects - the M and V is essential for the auction success and its development, on the other hand, can leverage the energy-efficiency market in Brazil. Finally, the last chapter concludes that the energy-efficiency auction can make a great contribution for energy efficiency and energy planning, but it can't be the only

An Intuitive Definition of Demand Flexibility in Direct Load Control

DEFF Research Database (Denmark)

Tahersima, Fatemeh; Madsen, Per Printz; Andersen, Palle

2013-01-01

Two control approaches: direct and indirect control of demand side energy management in a smart grid are studied. Indirect control of energy demands is based on economic incentives. In this approach, consumers will shift their energy consumption with the benefit of a cut down in the electricity b...

Water Demand Management for Social Justice | IDRC - International ...

International Development Research Centre (IDRC) Digital Library (Canada)

2012-01-18

Jan 18, 2012 ... Water Demand Management for Social Justice ... Women play larger role in Latin America's commercial urban waste management ... the management of solid waste in Latin America, according to research supported by IDRC.

Tapping Alternatives: The Benefits of Managing Urban Water Demands.

Science.gov (United States)

Dziegielewski, Benedykt; Baumann, Duane D.

1992-01-01

Presents the California plan for water demand management. Water conservation techniques are used to balance demand with supply. Discusses the implementation process: (1) water-use and service area analysis; (2) water-use forecasts; (3) benefit-cost analysis; (4) and development of a long-term water management plan. (17 references) (MCO)

Economic assumptions for evaluating reactor-related options for managing plutonium

International Nuclear Information System (INIS)

Rothwell, G.

1996-01-01

This paper discusses the economic assumptions in the U.S. National Academy of Sciences' report, Management and Disposition of Excess Weapons Plutonium: Reactor-Related Options (1995). It reviews the Net Present Value approach for discounting and comparing the costs and benefits of reactor-related options. It argues that because risks associated with the returns to plutonium management are unlikely to be constant over time, it is preferable to use a real risk-free rate to discount cash flows and explicitly describe the probability distributions for costs and benefits, allowing decision makers to determine the risk premium of each option. As a baseline for comparison, it assumes that one economic benefit of changing the current plutonium management system is a reduction in on-going Surveillance and Maintenance (S and M) costs. This reduction in the present value of S and M costs can be compared with the discounted costs of each option. These costs include direct construction costs, indirect costs, operating costs minus revenues, and decontamination and decommissioning expenses. The paper also discusses how to conduct an uncertainty analysis. It finishes by summarizing conclusions and recommendations and discusses how these recommendations might apply to the evaluation of Russian plutonium management options. (author)

Electricity demand in France: what's at stake for the energy transition?

International Nuclear Information System (INIS)

Berghmans, Nicolas

2017-02-01

This study identifies five key issues linked to electricity consumption to be taken into consideration in the management of the French power system transition: articulating the building stock renovation strategy and electricity consumption; integrating demand for electricity stemming from the development of electric vehicles; addressing winter 'peak' demand with specific demand-side policies; establishing energy demand management economic models as a flexible solution for the power system; identifying the impact of the emergence of a power system that is decentralised, balanced locally and connected with other energy carriers on the nature of demand for power from the grid. In the context of weak economic and demographic growth, the recent stabilization of electricity demand in France can be attributed to 'structural' factors, i.e. the continued expansion of the tertiary sector in the economy and the acceleration in energy efficiency gains. This evolution was poorly anticipated by stakeholders in the sector, which contributed to an imbalance between electricity demand and supply in Europe. In the absence of a major disruption, planning for transition in the electrical system should be made assuming relatively stable demand. However, major transformations will change the nature of the requirements placed on the electricity system: the times at which energy is consumed, the ability to manage the demand side of the system, and the geographical location of electricity demand within the network. Five key challenges are identified to anticipate the development of electricity consumption patterns: the role of electricity in satisfying building sector heating requirements, the integration of electric vehicle charging, the evolution of the winter demand peak, the development of demand-side management, and the emergence of an electric system based on local-level balancing. Too often considered an exogenous factor, the development in electricity consumption is in fact central

Power plants 2020+. Power plant options for the future and the related demand for research

International Nuclear Information System (INIS)

2010-01-01

This short overview already demonstrates that in the foreseeable future all generation options - nuclear power, fossil-fired power plants and renewable sources of energy - will continue to be applied. If, however, due to climate protection targets, energy conversion processes are to be to switched to CO 2 -free or -low carbon energy sources, comprehensive research endeavours will be required in order to advance existing technology options and to adjust them to changing conditions. This paper is bound to recommend individual fields of research from the viewpoint of the VGB Scientific Advisory Board for the period 2020 and beyond. Firstly, the generation structure in the European high-voltage grid and its development until 2020 will be considered, then the research demand for - Hard coal- and lignite-fired power plants, - Renewables-based electricity generation (wind, solar energy) and - Nuclear-based electricity generation will be outlined briefly, listing the main technology issues to be answered by researchers in order to increase efficiency and to settle any ''loose ends''. Apart from generation technologies, the options for storing electrical energy will also be dealt with. These options can contribute to make the feed-in of renewables-based electricity more permanent and sustainable. (orig.)

Conceptual framework for load controlling : with demand reduction bidding & consumer retention

NARCIS (Netherlands)

Babar, M.; Ahamed, I.; Al-Ammar, E.A.

2013-01-01

Advancement in demand side management strategies enables smart grid to cope with the increasing energy demand and provide economic benefit to all of its stakeholders. Moreover, emerging concept of smart pricing and advances in load control and communication generate new business opportunities as a

Options for change in the NHS consultant contract.

Science.gov (United States)

Clarke, R W; Gray, C

The lead negotiators for the management and consultant sides in an NHS trust in northern England responded to debate in their trust about consultant contracts by offering to research the attitudes of their peers towards a variety of contract options. The options tested included the current contract; models already examined in the trust and elsewhere, such as time sensitive and mild performance related contracts; and some more radical and speculative possibilities, including consultants franchising their services to the trust. Beyond the predictable conclusion that consultants would prefer no change while managers desired it, a time sensitive contract emerged as having potential for successful negotiation. On the other hand, neither consultants nor managers favoured a strict performance related contract or a fee for service contract. There was a strong similarity of opinion between the two groups on the relative salary values of the options, though the consultants consistently priced these higher than the managers.

The design of optimal electric power demand management contracts

Science.gov (United States)

Fahrioglu, Murat

1999-11-01

Our society derives a quantifiable benefit from electric power. In particular, forced outages or blackouts have enormous consequences on society, one of which is loss of economic surplus. Electric utilities try to provide reliable supply of electric power to their customers. Maximum customer benefit derives from minimum cost and sufficient supply availability. Customers willing to share in "availability risk" can derive further benefit by participating in controlled outage programs. Specifically, whenever utilities foresee dangerous loading patterns, there is a need for a rapid reduction in demand either system-wide or at specific locations. The utility needs to get relief in order to solve its problems quickly and efficiently. This relief can come from customers who agree to curtail their loads upon request in exchange for an incentive fee. This thesis shows how utilities can get efficient load relief while maximizing their economic benefit. This work also shows how estimated customer cost functions can be calibrated, using existing utility data, to help in designing efficient demand management contracts. In order to design such contracts, optimal mechanism design is adopted from "Game Theory" and applied to the interaction between a utility and its customers. The idea behind mechanism design is to design an incentive structure that encourages customers to sign up for the right contract and reveal their true value of power. If a utility has demand management contracts with customers at critical locations, most operational problems can be solved efficiently. This thesis illustrates how locational attributes of customers incorporated into demand management contract design can have a significant impact in solving system problems. This kind of demand management contracts can also be used by an Independent System Operator (ISO). During times of congestion a loss of economic surplus occurs. When the market is too slow or cannot help relieve congestion, demand management

Generation and Demand Scheduling for a Grid-Connected Hybrid Microgrid Considering Price-based Incentives

DEFF Research Database (Denmark)

Hernández, Adriana Carolina Luna; Aldana, Nelson Leonardo Diaz; Savaghebi, Mehdi

2017-01-01

Microgrids rely on energy management levels to optimally schedule their components. Conventionally, the research in this field has been focused on the optimal formulation of the generation or the demand side management separately without considering real case scenarios and validated only...... by simulation. This paper presents the power scheduling of a real site microgrid under a price-based demand response program defined in Shanghai, China managing generation and demand simultaneously. The proposed optimization problem aims to minimize operating cost by managing renewable energy sources as well...

The demand-side innovation policies and sustainable development in the small EU country. Nõudluspoolsed innovatsioonipoliitikad ja jätkusuutlik areng Euroopa Liidu väikeriigis

Directory of Open Access Journals (Sweden)

Tõnu Roolaht

2012-01-01

Full Text Available Various regulations, standards, public procurement activities, subsidies for private demand, and other similar support measures form the demand-side innovation policies. In the modern era, countries and governments dedicate more and more attention to the economic, social, and environmental sustainability of development and entrepreneurship. Sustainable development aims to meet human needs so that economic and social conditions will improve or at least not deteriorate and environment is preserved in order to allow future generations to meet their needs as well. Several demand-side innovation policy measures target also sustainability either as primary or secondary goal. Such policy measures tend to suffer from overshooting effects or fail to influence the behaviour in a desired manner. The purpose of this study is to offer suggestions concerning demand-side policy measures in order to improve their impact on the sustainability of development

Web-based energy information systems for energy management and demand response in commercial buildings

Energy Technology Data Exchange (ETDEWEB)

Motegi, Naoya; Piette, Mary Ann; Kinney, Satkartar; Herter, Karen

2003-04-18

Energy Information Systems (EIS) for buildings are becoming widespread in the U.S., with more companies offering EIS products every year. As a result, customers are often overwhelmed by the quickly expanding portfolio of EIS feature and application options, which have not been clearly identified for consumers. The object of this report is to provide a technical overview of currently available EIS products. In particular, this report focuses on web-based EIS products for large commercial buildings, which allow data access and control capabilities over the Internet. EIS products combine software, data acquisition hardware, and communication systems to collect, analyze and display building information to aid commercial building energy managers, facility managers, financial managers and electric utilities in reducing energy use and costs in buildings. Data types commonly processed by EIS include energy consumption data; building characteristics; building system data, such as heating, ventilation, and air-conditioning (HVAC) and lighting data; weather data; energy price signals; and energy demand-response event information. This project involved an extensive review of research and trade literature to understand the motivation for EIS technology development. This study also gathered information on currently commercialized EIS. This review is not an exhaustive analysis of all EIS products; rather, it is a technical framework and review of current products on the market. This report summarizes key features available in today's EIS, along with a categorization framework to understand the relationship between EIS, Energy Management and Control Systems (EMCSs), and similar technologies. Four EIS types are described: Basic Energy Information Systems (Basic-EIS); Demand Response Systems (DRS); Enterprise Energy Management (EEM); and Web-based Energy Management and Control Systems (Web-EMCS). Within the context of these four categories, the following characteristics of EIS

What determines how top managers value their stock options?

NARCIS (Netherlands)

Sautner, Z.; Weber, M.

2008-01-01

What determines how top managers value their executive stock options? We explore this question empirically by using a unique survey data set which combines subjective option valuation data with a wide set of individual-level variables. Inconsistent with the predictions of theory, individuals in our

Comparison of the marketing of demand response capacity and of power plant capacity in the minutes reserve market; Vergleich der Vermarktung von Demand-Response- und Kraftwerksleistung auf dem Minutenreservemarkt

Energy Technology Data Exchange (ETDEWEB)

Marz, Waldemar; Tzscheutschler, Peter [Technische Univ. Muenchen (Germany). Lehrstuhl fuer Energiewirtschaft und Anwendungstechnik; Henle, Markus [Stadtwerke Muenchen (Germany). Energiewirtschaft

2013-03-15

The greatest challenge in integrating renewable energies into the German and European power supply system lies in levelling out the imbalances between the fluctuating supply of energy from the wind and sun on the one side and the steady demand of the consumers on the other. Aside from the expansion of supra-regional transmission systems and storage power plants one instrument that has raised great hopes is the possibility of adapting demand to supply. These methods are known by the names of demand response (DR) or demand side management (DSM) and are at the core of the ''smart grid'' concept.

41 CFR 102-194.5 - What is the Standard and Optional Forms Management Program?

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false What is the Standard and Optional Forms Management Program? 102-194.5 Section 102-194.5 Public Contracts and Property Management... PROGRAMS 194-STANDARD AND OPTIONAL FORMS MANAGEMENT PROGRAM § 102-194.5 What is the Standard and Optional...

Simulation-based Strategies for Smart Demand Response

Directory of Open Access Journals (Sweden)

Ines Leobner

2018-03-01

Full Text Available Demand Response can be seen as one effective way to harmonize demand and supply in order to achieve high self-coverage of energy consumption by means of renewable energy sources. This paper presents two different simulation-based concepts to integrate demand-response strategies into energy management systems in the customer domain of the Smart Grid. The first approach is a Model Predictive Control of the heating and cooling system of a low-energy office building. The second concept aims at industrial Demand Side Management by integrating energy use optimization into industrial automation systems. Both approaches are targeted at day-ahead planning. Furthermore, insights gained into the implications of the concepts onto the design of the model, simulation and optimization will be discussed. While both approaches share a similar architecture, different modelling and simulation approaches were required by the use cases.

Increased demand-side flexibility: market effects and impacts on variable renewable energy integration

Directory of Open Access Journals (Sweden)

Åsa Grytli Tveten

2016-12-01

Full Text Available This paper investigates the effect of increased demand-side flexibility (DSF on integration and market value of variable renewable energy sources (VRE. Using assumed potentials, system-optimal within-day shifts in demand are investigated for the Northern European power markets in 2030, applying a comprehensive partial equilibrium model with high temporal and spatial resolution. Increased DSF is found to cause only a minor (less than 3% reduction in consumers’ cost of electricity. VRE revenues are found to increase (up to 5% and 2% for wind and solar power, respectively, and total VRE curtailment decreases by up to 7.2 TWh. Increased DSF causes only limited reductions in GHG emissions. The emission reduction is, however, sensitive to underlying assumptions. We conclude that increased DSF is a promising measure for improving VRE integration. However, low consumers’ savings imply that policies stimulating DFS will be needed to fully use the potential benefits of DSF for VRE integration

Tadalafil - a therapeutic option in the management of BPH-LUTS.

Science.gov (United States)

Carson, C C; Rosenberg, M; Kissel, J; Wong, D G

2014-01-01

Men with signs of benign prostatic hyperplasia (BPH) may experience lower urinary tract symptoms (LUTS) such as urinary frequency, urgency, intermittence, nocturia, straining, incomplete emptying or a weak urinary stream. The effective management of LUTS suggestive of BPH (BPH-LUTS) requires careful consideration of several factors, including the severity of a patient's symptoms, concurrent or other coexisting medical conditions, the ability to improve symptoms and impact quality of life (QOL), as well as the potential side effects of available treatment options. Several clinical studies have assessed phosphodiesterase type 5 (PDE5) inhibitors in reducing LUTS; however, tadalafil is the only PDE5 inhibitor approved for the treatment of signs and symptoms of BPH, as well as in men with both erectile dysfunction (ED) and the signs and symptoms of BPH. This review examined articles that assessed tadalafil in patients with signs and symptoms of BPH, with or without erectile dysfunction (ED), which led to regulatory approval in the United States and Europe. In dose-ranging and confirmatory studies, results demonstrate that tadalafil significantly improved total International Prostate Symptom Score (IPSS) following 12 weeks of treatment with once daily tadalafil 5 mg. Statistically significant improvements in Benign Prostatic Hyperplasia Impact Index (BII), IPSS subscores, IPSS QOL and International Index of Erectile Function (IIEF) were also observed. Improvement in urinary symptoms occurred regardless of age, previous treatment with an α1 -adrenergic blocker, BPH-LUTS severity at baseline or ED status. While tadalafil is most frequently recognised as a standard treatment option for men with ED, it also represents a well-tolerated and effective treatment option in men with moderate to severe BPH-LUTS. © 2013 John Wiley & Sons Ltd.

Natural options for management of melasma, a review.

Science.gov (United States)

Nomakhosi, Mpofana; Heidi, Abrahamse

2018-02-20

A blemish free, even-toned skin is universally associated with healthy skin. This reasoning makes people desire to have a flawless skin. Melanin is a naturally occurring pigment in humans. This pigment is responsible for skin, hair, and eye color, therefore determines our race and phenotypic appearance. On darker skin types, it is common that melanin production processes malfunctions. These malfunctions often lead to overproduction and secretion of melanin. As a result, unwanted pigmentary problems such melasma occur. Due to unknown etiology and its recurrence in nature, melasma is challenging to treat. The current available melasma treatment options often produce undesired side effects and suboptimum results. First-line topical treatments usually involve hydroquinone or topical steroids. Apart from the irritant reactions, this treatment mode is not suitable for all skin types. Skin care specialists are in search of an effective long-term cosmetics and cosmeceuticals to address hypermelanosis problems. Understanding of naturally occurring depigmenting agents provides an opportunity for more effective ways to manage melasma in all skin types. This review considers the benefits of naturally occurring ingredients which could help address skin pigmentation problems and broaden the choice for skin-lightening treatments.

Management options in the food chain for accidental radionuclide deposition

International Nuclear Information System (INIS)

Rantavaara, A.

2005-12-01

Finland with four other countries participated in the European Union's network project FARMING in 2000 - 2004. The aim of the project was to invite participants from each country representing the food supply chain in a stakeholder group and advance with the groups the networking in building preparedness for accidental contamination of the food production systems. The task of the groups was to evaluate the practicability of management options suggested for reduction of radiation exposure through foodstuffs, and for disposal of waste generated in implementation of these options. The criteria for practicability were effectiveness in reduction of radiation exposure through foodstuffs, technical feasibility, capacity, costs for implementation, secondary costs for waste disposal, socio-economic impact, and acceptability concerning ecology and protection of environment and landscape. Practicable management options aimed at sustainable restoration of food production systems after accidental contamination. The Finnish stakeholder group represented farm production, processing industry, food marketing, catering, advisor organisations for households and agriculture, consumers, nature conservation, the media, experts on environmental impact and authorities responsible for production, safety and security of foodstuffs, food supply and feedstuffs. The group was expected to examine the effect of the Finnish, and, also more generally, northern production conditions on the practicability of the suggested management options. The stakeholder group members first familiarized themselves with intervention after accidental contamination of a large milk production area and thereafter with practicability of individual management options. The evaluation was based on the group members' complementary expertise that very well covered the chain 'from field to fork' whether the issue was related to legislation, production methods, logistics, environmental impacts, or the issues of consumers and

Future internet concepts for demand management

CSIR Research Space (South Africa)

Madhoo, H

2015-04-01

Full Text Available research and experimental initiative linked to the Future Internet (TRESCIMO) which facilitates the validity of using these technologies as base for energy demand management. The initiative utilises a philosophy of informing customers about their energy...

Improving Water Demand Management by Addressing ...

International Development Research Centre (IDRC) Digital Library (Canada)

IDRC CRDI

Efforts to conserve water by improving water demand management policies .... First, ensure fair access to sustainable water supply, as well as, responsible water use. ... Water policy can also mandate reducing the loss of quantity or quality of ...

Calcific tendinitis of the rotator cuff: management options.

Science.gov (United States)

Suzuki, Kentaro; Potts, Aaron; Anakwenze, Oke; Singh, Anshu

2014-11-01

Calcific tendinitis of the rotator cuff tendons is a common cause of shoulder pain in adults and typically presents as activity-related shoulder pain. It is thought to be an active, cell-mediated process, although the exact pathophysiology remains unclear. Nonsurgical management continues to be the mainstay of treatment; most patients improve with modalities such as oral anti-inflammatory medication, physical therapy, and corticosteroid injections. Several options are available for patients who fail nonsurgical treatment, including extracorporeal shock wave therapy, ultrasound-guided needle lavage, and surgical débridement. These modalities alleviate pain by eliminating the calcific deposit, and several recent studies have demonstrated success with the use of these treatment options. Surgical management options include arthroscopic procedures to remove calcific deposits and subacromial decompression; however, the role of subacromial decompression and repair of rotator cuff defects created by removing these deposits remains controversial. Copyright 2014 by the American Academy of Orthopaedic Surgeons.

Energy supply and demand in California

Science.gov (United States)

Griffith, E. D.

1978-01-01

The author expresses his views on future energy demand on the west coast of the United States and how that energy demand translates into demand for major fuels. He identifies the major uncertainties in determining what future demands may be. The major supply options that are available to meet projected demands and the policy implications that flow from these options are discussed.

The benefits and barriers associated with prices to manage industrial demand

International Nuclear Information System (INIS)

Dominie, A.E.; Brunetto, T.

1990-01-01

Implementation of demand-side management (DSM) programs for the industrial sector is not the same as for the commercial or residental sectors. This difference is derived from sectoral characteristics such as global competition, uniqueness of production facilities, cash flow and budget constraints, and the relationship and trust of a customer with an electric utility. Experience has shown the success of DSM programs in industry to depend on factors such as market philosophies emphasizing fulfilling the needs of customers, the ability to measure and reward performance for achieving specific conservation and load management goals, technical expertise, short-term payback, size of risk, and degree of operational disturbance caused by the program. Time-of-use pricing for the industrial sector has been the subject of very few studies in Canada. Most of these studies show that hourly rate differentiation was not beneficial and that seasonal time-of-use rates would provide little benefit due to the nature of the load and the utility system. An outline is presented of time-of-use concepts in current Canadian utility rate structures. 1 tab

Managing Chemotherapy Side Effects: Swelling (Fluid Retention)

Science.gov (United States)

N ational C ancer I nstitute Managing Chemotherapy Side Effects Swelling (Fluid retention) “My hands and feet were swollen and puffy. My nurse helped me understand why I had to stop eating salty ...

Managing Chemotherapy Side Effects: Nausea and Vomiting

Science.gov (United States)

N ational C ancer I nstitute Managing Chemotherapy Side Effects U.S. DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institutes of Health Nausea and Vomiting “I take medicine so I won’t feel sick ...

A Framework for Understanding and Generating Integrated Solutions for Residential Peak Energy Demand

Science.gov (United States)

Buys, Laurie; Vine, Desley; Ledwich, Gerard; Bell, John; Mengersen, Kerrie; Morris, Peter; Lewis, Jim

2015-01-01

Supplying peak energy demand in a cost effective, reliable manner is a critical focus for utilities internationally. Successfully addressing peak energy concerns requires understanding of all the factors that affect electricity demand especially at peak times. This paper is based on past attempts of proposing models designed to aid our understanding of the influences on residential peak energy demand in a systematic and comprehensive way. Our model has been developed through a group model building process as a systems framework of the problem situation to model the complexity within and between systems and indicate how changes in one element might flow on to others. It is comprised of themes (social, technical and change management options) networked together in a way that captures their influence and association with each other and also their influence, association and impact on appliance usage and residential peak energy demand. The real value of the model is in creating awareness, understanding and insight into the complexity of residential peak energy demand and in working with this complexity to identify and integrate the social, technical and change management option themes and their impact on appliance usage and residential energy demand at peak times. PMID:25807384

Demand chain management | The evolution | Ericsson | ORiON

African Journals Online (AJOL)

The concepts of Supply Chain Management (SCM) and Demand Chain Management ... Dierent approaches start out in business and they are then, more or less ... The classical research concerning vertical marketing systems is very helpful in ...

Demand-Side Financing in Education: a Critical Examination of a Girls' Scholarship Program in Malawi--(Case Study)

Science.gov (United States)

Sineta, Abraham

2012-01-01

Despite the push for universal education, many disadvantaged and poor children in developing countries still do not have access to basic education. This among other reasons is due to poverty where poor families cannot afford the cost of basic education even when it is "free" of tuition (McDonald, 2007). Demand-side financing…

Current and future groundwater withdrawals: Effects, management and energy policy options for a semi-arid Indian watershed

Science.gov (United States)

Sishodia, Rajendra P.; Shukla, Sanjay; Graham, Wendy D.; Wani, Suhas P.; Jones, James W.; Heaney, James

2017-12-01

Effects of future expansion/intensification of irrigated agriculture on groundwater and surface water levels and availability in a semi-arid watershed were evaluated using an integrated hydrologic model (MIKE SHE/MIKE 11) in conjunction with biophysical measurements. Improved water use efficiency, water storage, and energy policy options were evaluated for their ability to sustain the future (2035) increased groundwater withdrawals. Three future withdrawal scenarios (low = 20, medium = 30, high = 50 wells/100 km2/year) based on the historical rate of growth of irrigation wells were formulated. While well drying from falling groundwater levels was limited to drought and consecutive below average rainfall years, under the current (2015) withdrawals, significant increases in frequency and duration (17-97 days/year) of well drying along with 13-26% (19-37 mm) reductions in surface flows were predicted under the future withdrawals. Higher (27-108%) energy demands of existing irrigation pumps due to declining groundwater levels and reduced hydroelectric generation due to decreased surface flows would create a vicious water-food-energy nexus in the future. Crop failure, one of the main causes of farmers' emotional distress and death in the region, is predicted to exacerbate under the future withdrawal scenarios. Shift to negative net recharge (-63 mm) and early and prolonged drying of wells under the high scenario will reduce the groundwater availability and negatively affect crop production in more than 60% and 90% of cropped areas in the Rabi (November-February) and summer (March-May) seasons, respectively during a drought year. Individual and combined demand (drip irrigation and reduced farm electricity subsidy) and supply (water storage) management options improved groundwater levels and reduced well drying by 55-97 days/year compared to business-as-usual management under the high scenario. The combined management (50% drip conversion, 50% reduction in subsidy, and

Demand- and supply-side determinants of diphtheria-pertussis-tetanus nonvaccination and dropout in rural India.

Science.gov (United States)

Ghosh, Arpita; Laxminarayan, Ramanan

2017-02-15

Although 93% of 12- to 23-month-old children in India receive at least one vaccine, typically Bacillus Calmette-Guérin, only 75% complete the recommended three doses of diphtheria-pertussis-tetanus (DPT, also referred to as DTP) vaccine. Determinants can be different for nonvaccination and dropout but have not been examined in earlier studies. We use the three-dose DPT series as a proxy for the full sequence of recommended childhood vaccines and examine the determinants of DPT nonvaccination and dropout between doses 1 and 3. We analyzed data on 75,728 6- to 23-month-old children in villages across India to study demand- and supply-side factors determining nonvaccination with DPT and dropout between DPT doses 1 and 3, using a multilevel approach. Data come from the District Level Household and Facility Survey 3 (2007-08). Individual- and household-level factors were associated with both DPT nonvaccination and dropout between doses 1 and 3. Children whose mothers had no schooling were 2.3 times more likely not to receive any DPT vaccination and 1.5 times more likely to drop out between DPT doses 1 and 3, compared with children whose mothers had 10 or more years of schooling. Although supply-side factors related to availability of public health facilities and immunization-related health workers in villages were not correlated with dropout between DPT doses 1 and 3, children in districts where 46% or more villages had a healthcare subcentre were 1.5 times more likely to receive at least one dose of DPT vaccine compared with children in districts where 30% or fewer villages had subcentres. Nonvaccination with DPT in India is influenced by village- and district-level contextual factors over and above individuals' background characteristics. Dropout between DPT doses 1 and 3 is associated more strongly with demand-side factors than with village- and district-level supply-side factors. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

Managing Chemotherapy Side Effects: Hair Loss (Alopecia)

Science.gov (United States)

... C ancer I nstitute Managing Chemotherapy Side Effects Hair Loss (Alopecia) “Losing my hair was hard at first. ... and anywhere on your body may fall out. Hair loss is called alopecia. When will my hair start ...

Management of Water Demand in Africa and the Middle East ...

International Development Research Centre (IDRC) Digital Library (Canada)

Management of Water Demand in Africa and the Middle East : Current Practices and Future Needs. Couverture du livre Management of Water Demand in Africa and the Middle East : Current Practices. Directeur(s) : David B. Brooks, Eglal Rached et Maurice Saade. Maison(s) d'édition : CRDI. 1 janvier 1997. ISBN : Épuisé.

Management of Water Demand in Africa and the Middle East ...

International Development Research Centre (IDRC) Digital Library (Canada)

1997-01-01

Management of Water Demand in Africa and the Middle East : Current Practices and Future Needs. Couverture du livre Management of Water Demand in Africa and the Middle East : Current Practices. Editor(s):. David B. Brooks, Eglal Rached et Maurice Saade. Publisher(s):. CRDI. January 1, 1997. ISBN: Épuisé. 78 pages.

Demand-side bidding in Brazil; Leilao de eficiencia energetica no Brasil

Energy Technology Data Exchange (ETDEWEB)

Garcia, Agenor Gomes Pinto

2008-01-15

Since the New Electric Sector Model's conception an energy-efficiency auction, like the ones used to buy new energy, was considered. Recently, the subject has been frequently commented in studies and meetings. This thesis discuss the main issues about its implementation in Brazil and proposes a model for this. The first chapter shows the history and the Electric Sector actual frame, with emphasis in the energy planning, resumed after the 2001 electricity shortage, the structure created for the system expansion and analyses the results of the new energy's auctions until now. The second chapter studies how the energy-efficiency auction can affect agents and consumers and presents the auction theory, which is growing fast in recent years, and how it can be applied to the present case, showing the possible agents' behavior - ESCOs, larger consumers and appliance manufacturers, and its implication on the auction shape. The third chapter shows the past world experience in energy-efficiency selling - the USA DSB (demand-side bidding) and its actual results and an IEA (International Energy Agency) study about this market mechanism of energy-efficiency promotion. 'The DSB works but it's not simple' (Geller, 2006) sums up the main conclusion about DSB - it develops the M and V techniques and the ESCO industry, making energy-efficiency as good as new generation for system's growing. The fourth chapter presents a proposal for the energy-efficiency auction's implementation in Brazil - its opportunity, resources source, regional aspects and the steps to get there. The fifth chapter analyses the M and V 's techniques and shows examples of the four options for projects - the M and V is essential for the auction success and its development, on the other hand, can leverage the energy-efficiency market in Brazil. Finally, the last chapter concludes that the energy-efficiency auction can make a great contribution for energy efficiency and

Water Demand Management Policy Brief No

International Development Research Centre (IDRC) Digital Library (Canada)

Bob Stanley

Water demand management (WDM) programs have been widely implemented across the MENA region and elsewhere, with varying degrees of success. The criteria below are intended to help policymakers determine how best to develop institutions with the capacity and capability to design, implement and monitor WDM ...

ICT Solutions for Highly-Customized Water Demand Management Strategies

Science.gov (United States)

Giuliani, M.; Cominola, A.; Castelletti, A.; Fraternali, P.; Guardiola, J.; Barba, J.; Pulido-Velazquez, M.; Rizzoli, A. E.

2016-12-01

The recent deployment of smart metering networks is opening new opportunities for advancing the design of residential water demand management strategies (WDMS) relying on improved understanding of water consumers' behaviors. Recent applications showed that retrieving information on users' consumption behaviors, along with their explanatory and/or causal factors, is key to spot potential areas where targeting water saving efforts, and to design user-tailored WDMS. In this study, we explore the potential of ICT-based solutions in supporting the design and implementation of highly customized WDMS. On one side, the collection of consumption data at high spatial and temporal resolutions requires big data analytics and machine learning techniques to extract typical consumption features from the metered population of water users. On the other side, ICT solutions and gamifications can be used as effective means for facilitating both users' engagement and the collection of socio-psychographic users' information. This latter allows interpreting and improving the extracted profiles, ultimately supporting the customization of WDMS, such as awareness campaigns or personalized recommendations. Our approach is implemented in the SmartH2O platform and demonstrated in a pilot application in Valencia, Spain. Results show how the analysis of the smart metered consumption data, combined with the information retrieved from an ICT gamified web user portal, successfully identify the typical consumption profiles of the metered users and supports the design of alternative WDMS targeting the different users' profiles.

Time management behavior as a moderator for the job demand-control interaction

NARCIS (Netherlands)

Peeters, M.A.G.; Rutte, C.G.

2005-01-01

The interaction effects of time management, work demands, and autonomy on burnout were investigated in a survey study of 123 elementary teachers. A 3-way interaction between time management, work demands, and autonomy was hypothesized: The combination of high work demands and low autonomy was

Latin American electric power developments and hydrocarbon demands

International Nuclear Information System (INIS)

Sierra, G.S.

1994-01-01

Energy sectors in Latin American countries are undergoing a series of far-reaching changes in institutional arrangements and roles. These changes will have a decisive influence on energy sector evolution in coming decades. The results of two decades of mismanagement in the region's energy sector are outlined, showing stagnation in the electric power and petroleum industries caused by such factors as bureaucratic management, preferential treatment given to public enterprises, the adoption of objectives other than economic profitability, insufficient self-generation of resources due to tariffs not reflecting economic costs, and heavy debt burdens. If forecasts of future energy demand in Latin America are correct, the region's hydrocarbon sector will have to invest ca US$20 billion/y and the electric power sector nearly the same amount. This is considered beyond the capacity of the region's industries. Private sector participation is expected to raise the efficiency level of the hydrocarbon and power industries through such initiatives as privatization (complete or partial), joint government-private ventures, subcontracting, direct investment, and opening of monopolies such as power distribution to third-party competition. The state role in this process will be to create a suitable environment for private enterprise including clear and stable rules and regulatory frameworks. Financing options are discussed along with ways to reduce investment requirements. It is especially possible to reduce such requirements in the power sector through such means as retrofitting of plants with more modern equipment, reducing power losses, improved metering and billing, energy substitution, demand-side management, and energy conservation programs

DEVELOPMENT OF THE E-GOVERNMENT MARKET IN THE EUROPEAN UNION: AN ANALYSIS OF THE SUPPLY VERSUS DEMAND SIDES

Directory of Open Access Journals (Sweden)

Veghes Calin

2011-07-01

Full Text Available E-government represents one of the most palpable results of the dynamic development of the information and communication technology. Defined mostly as an intensive use of information technologies to provide public services, e-government has been approached in the literature rather from a technological perspective, with a significant importance given to the supply and a lower attention paid to the demand side. The increasing interest in taking into consideration the demand side in the development of the e-government initiatives and projects has created the foundation for a shift in the way the conceptual framework for e-government planning and implementation is defined, from the technology infrastructure and costs to the customer-centric character of all the efforts done. The European Union put e-government on its agenda aiming to improve access to the public information and services, increase transparency of public administration, exploit effectively the information technology within public administration, and establishing e-procurement. The development of the e-government services in the Member States, as it is expressed by the data regarding the supply and demand side, has been conducted in a more or less different manner that led, at the Unions level, to a relatively high availability but a rather low usage of the specific services. The paper explores the relationship between the e-government supply and demand based on the secondary data referring to the public services available to the citizens (as these are defined by the Eurostat methodology and the usage of these services by the individuals, integrating them through an analytical matrix inspired by the BCG model. Probably the most important conclusion of this analysis states that development of the e-government services has not been accompanied by measures meant to stimulate their usage in the most of the European Union Member States. The analytical matrix allowed also the identification

An Appreciative View of the Brighter Side of Terror Management Processes

OpenAIRE

Kenneth E. Vail, III; Jacob Juhl

2015-01-01

Physical death is an inevitable part of life. From the perspective of terror management theory (TMT), people’s efforts to manage the awareness of death can sometimes have harmful social consequences. However, those negative consequences are merely one side of the existential coin. In considering the other side of the coin, the present article highlights the more beneficial trajectories of the terror management process. For example, the awareness of mortality can motivate people to prioritize ...

Demand side management in recycling and electricity retail pricing

Science.gov (United States)

Kazan, Osman

This dissertation addresses several problems from the recycling industry and electricity retail market. The first paper addresses a real-life scheduling problem faced by a national industrial recycling company. Based on their practices, a scheduling problem is defined, modeled, analyzed, and a solution is approximated efficiently. The recommended application is tested on the real-life data and randomly generated data. The scheduling improvements and the financial benefits are presented. The second problem is from electricity retail market. There are well-known patterns in daily usage in hours. These patterns change in shape and magnitude by seasons and days of the week. Generation costs are multiple times higher during the peak hours of the day. Yet most consumers purchase electricity at flat rates. This work explores analytic pricing tools to reduce peak load electricity demand for retailers. For that purpose, a nonlinear model that determines optimal hourly prices is established based on two major components: unit generation costs and consumers' utility. Both are analyzed and estimated empirically in the third paper. A pricing model is introduced to maximize the electric retailer's profit. As a result, a closed-form expression for the optimal price vector is obtained. Possible scenarios are evaluated for consumers' utility distribution. For the general case, we provide a numerical solution methodology to obtain the optimal pricing scheme. The models recommended are tested under various scenarios that consider consumer segmentation and multiple pricing policies. The recommended model reduces the peak load significantly in most cases. Several utility companies offer hourly pricing to their customers. They determine prices using historical data of unit electricity cost over time. In this dissertation we develop a nonlinear model that determines optimal hourly prices with parameter estimation. The last paper includes a regression analysis of the unit generation cost

Integrated design and evaluation of biomass energy system taking into consideration demand side characteristics

International Nuclear Information System (INIS)

Ren, Hongbo; Zhou, Weisheng; Nakagami, Ken'ichi; Gao, Weijun

2010-01-01

In this paper, a linear programming model has been developed for the design and evaluation of biomass energy system, while taking into consideration demand side characteristics. The objective function to be minimized is the total annual cost of the energy system for a given customer equipped with a biomass combined cooling, heating and power (CCHP) plant, as well as a backup boiler fueled by city gas. The results obtained from the implementation of the model demonstrate the optimal system capacities that customers could employ given their electrical and thermal demands. As an illustrative example, an investigation addresses the optimal biomass CCHP system for a residential area located in Kitakyushu Science and Research Park, Japan. In addition, sensitivity analyses have been elaborated in order to show how the optimal solutions would vary due to changes of some key parameters including electricity and city gas tariffs, biogas price, electricity buy-back price, as well as carbon tax rate. (author)

Addressing maternal healthcare through demand side financial incentives: experience of Janani Suraksha Yojana program in India.

Science.gov (United States)

Gopalan, Saji S; Durairaj, Varatharajan

2012-09-15

Demand side financing (DSF) is a widely employed strategy to enhance utilization of healthcare. The impact of DSF on health care seeking in general and that of maternal care in particular is already known. Yet, its effect on financial access to care, out-of-pocket spending (OOPS) and provider motivations is not considerably established. Without such evidence, DSFs may not be recommendable to build up any sustainable healthcare delivery approach. This study explores the above aspects on India's Janani Suraksha Yojana (JSY) program. This study employed design and was conducted in three districts of Orissa, selected through a three-stage stratified sampling. The quantitative method was used to review the Health Management Information System (HMIS). The qualitative methods included focus groups discussions with beneficiaries (n = 19) and community intermediaries (n = 9), and interviews (n = 7) with Ministry of Health officials. HMIS data enabled to review maternal healthcare utilization. Group discussions and interviews explored the perceived impact of JSY on in-facility delivery, OOPS, healthcare costs, quality of care and performance motivation of community health workers. The number of institutional deliveries, ante-and post-natal care visits increased after the introduction of JSY with an annual net growth of 18.1%, 3.6% and 5% respectively. The financial incentive provided partial financial risk-protection as it could cover only 25.5% of the maternal healthcare cost of the beneficiaries in rural areas and 14.3% in urban areas. The incentive induced fresh out-of-pocket spending for some mothers and it could not address maternal care requirements comprehensively. An activity-based community worker model was encouraging to augment maternal healthcare consumption. However, the existing level of financial incentives and systemic support were inadequate to motivate the volunteers optimally on their performance. Demand side financial incentive could enhance financial

13 CFR 107.250 - Exclusion of stock options issued by Licensee from Management Expenses.

Science.gov (United States)

2010-01-01

... Sbic § 107.250 Exclusion of stock options issued by Licensee from Management Expenses. Stock options... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Exclusion of stock options issued by Licensee from Management Expenses. 107.250 Section 107.250 Business Credit and Assistance SMALL...

The benefits and barriers associated with using prices to manage industrial demand

International Nuclear Information System (INIS)

Dominie, A.E.; Brunetto, T.

1990-01-01

Implementation of demand-side management (DSM) programs for the industrial sector is not the same as for the commercial or residental sectors. This difference is derived from sectoral characteristics such as global competition, uniqueness of production facilities, cash flow and budget constraints, and the relationship and trust of a customer with an electric utility. Experience has shown the success of DSM programs in industry to depend on factors such as market philosophies emphasizing fulfilling the needs of customers, the ability to measure and reward performance for achieving specific conservation and load management goals, technical expertise, short-term payback, size of risk, and degree of operational disturbance caused by the program. Time-of-use pricing for the industrial sector has been the subject of very few studies in Canada. Most of these studies show that hourly rate differentiation was not beneficial and that seasonal time-of-use rates would provide little benefit due to the nature of the load and the utility system. An outline is presented of time-of-use concepts in current Canadian utility rate structures. 1 tab

Optimal supply and demand investments in municipal energy systems

International Nuclear Information System (INIS)

Rolfsman, Bjoern

2004-01-01

In many municipalities, there are district heating networks, which are quite commonly supplied by combined heat and power plants (CHP). A district heating network contains buildings of different types. In this paper, one such municipal energy system is analysed. In order to provide space heating and domestic hot water, investments could be made on the supply side in power plants, or on the demand side in the buildings, for example in the form of extra wall insulation. The electricity from the CHP plants is supplied to the municipality but can also be sold to the electricity market, and electricity can, of course, also be bought from the market. The variation in price on the spot market over any given day is significant. The need for district heat in the building stock also varies, for example due to climatic conditions. The energy system in the case study is analysed with a mixed integer linear programming model. The model has 3 h time steps in order to reflect diurnal variations, and an entire year is analysed. A case study is presented for the city of Linkoeping in Sweden. On the demand side, the options are: extra wall insulation, extra attic insulation and better types of windows. The building stock is divided into nine categories

Blood banks meet the paradox of Gabriel's Horn: what are the options to maintain supply as demand decreases?

Science.gov (United States)

Beckman, N; Yazer, M; Land, K; Chesneau, S; Caulfield, J

2016-06-01

Blood services worldwide have observed a decline in the demand for red blood cells (RBC). Despite this general decline, the demand profile has changed significantly with the demand for O D negative RBCs being maintained; whereas B D positive and AB D positive RBC demand has been reduced. In 2015, the blood type O D negative was seen in 6·3% of the combined first time donors among the five American Blood Centres involved in this study and 7·4% of first time Australian donors in 2014/2015, whereas O D negative distributions accounted for 10·5% of all red cell units issued by the American centres and 13·9% by the Australian centres. Inventory can therefore be of sufficient overall quantity but may not be adequate for the demand for units with specific blood types. Recruitment of new donors may need to become more targeted and/or financial or inventory control measures could also be required to ensure inventory matches demand. Blood Services will need to consider the available options in order to ensure that sufficiency of supply is secure and the donor panel is optimised to meet the new demand paradigm. © 2016 British Blood Transfusion Society.

Technological options for the management of biosolids.

Science.gov (United States)

Wang, Hailong; Brown, Sally L; Magesan, Guna N; Slade, Alison H; Quintern, Michael; Clinton, Peter W; Payn, Tim W

2008-06-01

provide a complete management for biosolids. A number of advanced thermal conversion technologies (e.g., supercritical water oxidation process and pyrolysis) are under development for biosolids management with a goal to generate useful products, such as higher quality fuels and recovery of phosphorus. With an ever-increasing demand for renewable energy, growing bioenergy crops and forests using biosolids as a fertilizer and soil amendment can not only contribute to the low-carbon economy but also maximize the nutrient and carbon value of the biosolids. Land application of biosolids achieves a complete reuse of its nutrients and organic carbon at a relatively low cost. Therefore, land application should become a preferred management option where there is available land, the quality of biosolids meet regulatory requirements, and it is socially acceptable. Intensive energy cropping and forest production using biosolids can help us meet the ever-increasing demand for renewable energy, which can eliminate the contamination potential for food sources, a common social concern about land application of biosolids. In recent years, increasing numbers of national and local governments have adopted more stringent regulations toward biosolid management. Under such a political climate, biosolids producers will have to develop multireuse strategies for biosolids to avoid being caught because a single route management practice might be under pressure at a short notice. Conventional incineration systems for biosolids management generally consume more energy than they produce and, although by-products may be used in manufacturing, this process cannot be regarded as a beneficial use of biosolids. However, biosolids are likely to become a source of renewable energy and produce 'carbon credits' under the increasingly popular, low-carbon economy policy. To manage biosolids in a sustainable manner, there is a need for further research in the following areas: achieving a higher degree of public

Option managing for radioactive metallic waste from the decommissioning of Kori Unit 1

Energy Technology Data Exchange (ETDEWEB)

Kessel, David S.; Kim, Chagn Lak [KEPCO International Nuclear Graduate School (KINGS), Ulsan (Korea, Republic of)

2017-06-15

The purpose of this paper is to evaluate several leading options for the management of radioactive metallic waste against a set of general criteria including safety, cost effectiveness, radiological dose to workers and volume reduction. Several options for managing metallic waste generated from decommissioning are evaluated in this paper. These options include free release, controlled reuse, and direct disposal of radioactive metallic waste. Each of these options may involve treatment of the metal waste for volume reduction by physical cutting or melting. A multi-criteria decision analysis was performed using the Analytic Hierarchy Process (AHP) to rank the options. Melting radioactive metallic waste to produce metal ingots with controlled reuse or free release is found to be the most effective option.

Simulation of demand side participation in Spanish short term electricity markets

International Nuclear Information System (INIS)

Valencia-Salazar, I.; Alvarez, C.; Escriva-Escriva, G.; Alcazar-Ortega, M.

2011-01-01

Highlights: → Benefits from customer active participation can be obtained with a proper generation of bids and offers. → Simulation of Spanish customers' participation is shown in daily, intra-daily and balancing markets. → Market efficiency and economics profits arise in balancing markets by using customer load reductions. → Real market prices and real customers' consumptions profiles are used in the simulations. -- Abstract: Demand response resources management is one of the most investigated solutions oriented to improve the efficiency in electricity markets. In this paper, the capability of customers to participate in short term markets is analyzed. An available methodology to analyze the daily and monthly energy consumptions of large customers is used to create energy offers and bids. This allows customers to participate in energy markets in order to buy, as first step, the usual electricity consumption and, additionally, to offer demand reductions in the short term electricity markets. Additionally, this paper shows the customer potential to participate in the Spanish electricity markets.

A Novel Technique to Enhance Demand Responsiveness

DEFF Research Database (Denmark)

Farashbashi-Astaneh, Seyed-Mostafa; Bhattarai, Bishnu Prasad; Bak-Jensen, Birgitte

2015-01-01

In this study, a new pricing approach is proposed to increase demand responsiveness. The proposed approach considers two well-known demand side management techniques, namely peak shaving and valley filling. This is done by incentivising consumers by magnifying price difference between peak and off......-peak hours. The usefulness of the suggested method is then investigated by its combination with an electric vehicle optimal scheduling methodology which captures both economic valuation and grid technical constraints. This case is chosen in this study to address network congestion issues, namely under...

French programs for advanced waste management options

Energy Technology Data Exchange (ETDEWEB)

Salvatores, M [CEA-DRN (France); Schapira, J P [CNRS-IN2P3 (France); Mouney, H [EDF-DE (France)

1997-11-01

Several organisms (CEA, CNRS, EdF, etc.) are cooperating in France on Accelerator-Driven Systems (ADS). The major motivation is the investigation of innovative options for the radioactive waste management. The paper describes the ongoing activities and future directions of this cooperative effort in the field of ADS. 11 refs, 3 figs.

Using real options analysis to support strategic management decisions

Science.gov (United States)

Kabaivanov, Stanimir; Markovska, Veneta; Milev, Mariyan

2013-12-01

Decision making is a complex process that requires taking into consideration multiple heterogeneous sources of uncertainty. Standard valuation and financial analysis techniques often fail to properly account for all these sources of risk as well as for all sources of additional flexibility. In this paper we explore applications of a modified binomial tree method for real options analysis (ROA) in an effort to improve decision making process. Usual cases of use of real options are analyzed with elaborate study on the applications and advantages that company management can derive from their application. A numeric results based on extending simple binomial tree approach for multiple sources of uncertainty are provided to demonstrate the improvement effects on management decisions.

Municipal solid waste options : integrating organics management and residual disposal treatment : executive summary

Energy Technology Data Exchange (ETDEWEB)

Cant, M. (comp.) [Totten Sims Hubicki Associates Ltd., Calgary, AB (Canada); Van der Werf, P. [2cg Inc., Edmonton, AB (Canada); Kelleher, M. [Kelleher Environmental, Toronto, ON (Canada); Merriman, D. [MacViro Consultants, Markham, ON (Canada); Fitcher, K. [Gartner Lee Ltd., Toronto, ON (Canada); MacDonald, N. [CH2M Hill Engineering Ltd., Calgary, AB (Canada)

2006-04-15

The Municipal Solid Waste (MSW) Options Report explored different MSW management options for 3 community sizes: 20,000, 80,000 and 200,0000 people. It was released at a time when many communities were developing waste management plans to cost-effectively reduce environmental impacts and conserve landfill capacity. The purpose of this report was to provide a greater understanding on the environmental, social, economic, energy recovery/utilization and greenhouse gas (GHG) considerations of MSW management. The report also demonstrated the interrelationships between the management of organics and residuals. It was based on information from existing waste diversion and organics management options and emerging residual treatment technology options. The following organics management and residual treatment disposal options were evaluated: composting; anaerobic digestion; sanitary landfills; bioreactor landfills; and thermal treatment. Composting was examined with reference to both source separated organics (SSO) and mixed waste composting. SSO refers to the separation of materials suitable for composting solid waste from households, while mixed waste composting refers to the manual or mechanical removal of recyclable material from the waste, including compost. The composting process was reviewed along with available technologies such as non-reactor windrow; aerated static pile; reactor enclosed channel; and, container tunnel. An evaluation of SSO and mixed waste composting was then presented in terms of environmental, social, financial and GHG impacts. refs., tabs., figs.

Potential transportation demand management programs and measures

Energy Technology Data Exchange (ETDEWEB)

Litman, T. [Victoria Transport Policy Institute, Victoria, BC (Canada)

1997-02-07

The advantages of transportation demand management (TDM) programs were discussed. TDM includes several policies, programs and measures designed to change travel patterns. TDM programs include commute trip reductions, pricing policies, land use management strategies, and programs to support alternative modes of transportation such as public transit, carpooling, bicycling, walking and telecommuting. TDM programs are designed to reduce traffic congestion and air pollution. Some other TDM programs and measures include: enabling programs, alternative mode encouragement, driving disincentives, parking programs, marginalizing user costs, reducing automobile ownership, and land use management.

Solar + Storage Synergies for Managing Commercial-Customer Demand Charges

Energy Technology Data Exchange (ETDEWEB)

Gagnon, Pieter J. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Govindarajan, Anand [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Bird, Lori A. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Barbose, Galen [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Darghouth, Naim [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Mills, Andrew [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2017-10-24

We study the synergies between behind-the-meter solar and storage in reducing commercial-customer demand charges. This follows two previous studies that examined demand charge savings for stand-alone solar in both the residential and commercial sectors. In this study we show that solar and storage show consistent synergies for demand charge management, that the magnitude of reductions are highly customer-specific, and that the magnitude of savings is influenced by the design of the electricity tariff.

A PC-based software package for modeling DOE mixed-waste management options

International Nuclear Information System (INIS)

Abashian, M.S.; Carney, C.; Schum, K.

1995-02-01

The U.S. Department of Energy (DOE) Headquarters and associated contractors have developed an IBM PC-based software package that estimates costs, schedules, and public and occupational health risks for a range of mixed-waste management options. A key application of the software package is the comparison of various waste-treatment options documented in the draft Site Treatment Plans prepared in accordance with the requirements of the Federal Facility Compliance Act of 1992. This automated Systems Analysis Methodology consists of a user interface for configuring complexwide or site-specific waste-management options; calculational algorithms for cost, schedule and risk; and user-selected graphical or tabular output of results. The mixed-waste management activities modeled in the automated Systems Analysis Methodology include waste storage, characterization, handling, transportation, treatment, and disposal. Analyses of treatment options identified in the draft Site Treatment Plans suggest potential cost and schedule savings from consolidation of proposed treatment facilities. This paper presents an overview of the automated Systems Analysis Methodology

Side Stream Filtration for Cooling Towers

Energy Technology Data Exchange (ETDEWEB)

None

2012-10-20

This technology evaluation assesses side stream filtration options for cooling towers, with an objective to assess key attributes that optimize energy and water savings along with providing information on specific technology and implementation options. This information can be used to assist Federal sites to determine which options may be most appropriate for their applications. This evaluation provides an overview of the characterization of side stream filtration technology, describes typical applications, and details specific types of filtration technology.

Time management behavior as a moderator for the job demand-control interaction.

Science.gov (United States)

Peeters, Miranda A G; Rutte, Christel G

2005-01-01

The interaction effects of time management, work demands, and autonomy on burnout were investigated in a survey study of 123 elementary teachers. A 3-way interaction between time management, work demands, and autonomy was hypothesized: The combination of high work demands and low autonomy was predicted to lead to burnout for teachers low in time management and not, or to a lesser extent, for those high in time management. This hypothesis is confirmed for emotional exhaustion, the most predictive dimension of teacher burnout, and partly confirmed for the personal accomplishment dimension. Generalizability to other contactual occupations is discussed. ((c) 2005 APA, all rights reserved).

Evaluating Nitrogen Management Options for Reducing Nitrate Leaching from Northeast U.S. Pastures

Directory of Open Access Journals (Sweden)

William L. Stout

2001-01-01

Full Text Available Substantial amounts of nitrate nitrogen NO3-N can leach from intensively grazed pasture in the northeast U.S. where there is about 30 cm of groundwater recharge, annually. Management options for reducing NO3-N leaching were evaluated for this environment using the Cornell Net Carbohydrate and Protein System Model and a recently developed nitrogen leaching index. Management options utilizing energy supplementation of grazing dairy cows could improve nitrogen efficiency within the cow, but would not necessarily reduce NO3-N leaching at the pasture scale if stocking rate was not controlled. The management option of using white clover to supply nitrogen to the pasture decreased NO3-N leaching, but produced less dry matter yield, which in turn reduced stocking rate. The economic returns of reducing NO3-N with these options need to be evaluated in light of milk prices and commodity and fertilizer nitrogen costs. At current prices and costs, the economic benefit from the energy supplementation options is substantial.

THE CONCEPT OF REFLEXIVE MANAGEMENT OF CONSUMER DEMAND

Directory of Open Access Journals (Sweden)

Maryna Mavrina

2017-11-01

Full Text Available Development of theoretical approaches of demand management is conducted from the moment of awareness of the importance of this concept. Many models of individual consumers were developed. However, to predict the reaction of consumers to the commercial policy of the enterprise, exact methods do not exist yet because the available ones are mostly empirical in nature. Models of behaviour often do not provide the expected result because they use an erroneous approach to the analysis of the mechanism of demand formation. The subject of the research is the theoretical and methodological basis, methods of assessment, and reflexive management of consumer demand of commercial enterprises. The purpose of the paper is developing a concept of reflexive management of consumer demand. To achieve the research goal, the following tasks are set and solved: to substantiate the theoretical and methodological foundations of reflexive consumer management, to analyse existing approaches to the modelling of consumer behaviour; to improve the model of consumer behaviour; to develop a concept of reflexive management of consumer behaviour. Methodology. In the paper, we use such methods and approaches to research as: reflexive approach (phenomenological method, behavioural economic theory, marketing approach, abstract-logical analysis, analysis of theoretical approaches to the modelling of consumer behaviour. Results. Modern approaches to modelling of consumer behaviour are mostly empirical in nature and have shortcomings of general models. In them, there is no description of specific situations of the purchase of goods. They cannot be quantified. Therefore, they cannot be practical models. But they have a weighty advantage in a comprehensive look at motivated purchases, what makes it possible to evaluate the relevance of individual variables and to understand the fundamental processes of consumer behaviour. It makes possible to identify the variables necessary for the

Energy options

International Nuclear Information System (INIS)

Hampton, Michael

1999-01-01

This chapter focuses on energy options as a means of managing exposure to energy prices. An intuitive approach to energy options is presented, and traditional definitions of call and put options are given. The relationship between options and swaps, option value and option exercises, commodity options, and option pricing are described. An end-user's guide to energy option strategy is outlined, and straight options, collars, participating swaps and collars, bull and bear spreads, and swaption are examined. Panels explaining the defining of basis risk, and discussing option pricing and the Greeks, delta hedging, managing oil options using the Black-Scholes model, caps, floors and collars, and guidelines on hedging versus speculation with options are included in the paper

Addressing Energy Demand through Demand Response. International Experiences and Practices

Energy Technology Data Exchange (ETDEWEB)

Shen, Bo [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Ghatikar, Girish [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Ni, Chun Chun [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Dudley, Junqiao [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Martin, Phil [Enernoc, Inc., Boston, MA (United States); Wikler, Greg

2012-06-01

Demand response (DR) is a load management tool which provides a cost-effective alternative to traditional supply-side solutions to address the growing demand during times of peak electrical load. According to the US Department of Energy (DOE), demand response reflects “changes in electric usage by end-use customers from their normal consumption patterns in response to changes in the price of electricity over time, or to incentive payments designed to induce lower electricity use at times of high wholesale market prices or when system reliability is jeopardized.” 1 The California Energy Commission (CEC) defines DR as “a reduction in customers’ electricity consumption over a given time interval relative to what would otherwise occur in response to a price signal, other financial incentives, or a reliability signal.” 2 This latter definition is perhaps most reflective of how DR is understood and implemented today in countries such as the US, Canada, and Australia where DR is primarily a dispatchable resource responding to signals from utilities, grid operators, and/or load aggregators (or DR providers).

Water brief — Wastewater Reuse for Water Demand Management ...

International Development Research Centre (IDRC) Digital Library (Canada)

2011-01-04

Jan 4, 2011 ... Water Demand Management (WDM) is a water management approach that aims to ... WDM is simply defined as 'getting the most of the water that we have', while taking into ... Villages in Nepal prepare for weather extremes.

Intermittent Renewable Management Pilot Phase 2

Energy Technology Data Exchange (ETDEWEB)

Kiliccote, Sila [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Homan, Gregory [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Anderson, Robert [Olivine, Inc., San Ramon, CA (United States); Hernandez, John [Pacific Gas & Electric Company, San Francisco, CA (United States)

2015-04-01

The Intermittent Renewable Management Pilot - Phase 2 (IRM2) was designed to study the feasibility of demand-side resources to participate into the California Independent System Operator (CAISO) wholesale market as proxy demand resources (PDR). The pilot study focused on understanding the issues related with direct participation of third-parties and customers including customer acceptance; market transformation challenges (wholesale market, technology); technical and operational feasibility; and value to the rate payers, DR resource owners and the utility on providing an enabling mechanism for DR resources into the wholesale markets. The customer had the option of committing to either three contiguous hour blocks for 24 days or six contiguous hours for 12 days a month with day-ahead notification that aligned with the CAISO integrated forward market. As a result of their being available, the customer was paid $10/ kilowatt (kW)-month for capacity in addition to CAISO energy settlements. The participants were limited to no more than a 2 megawatt (MW) capacity with a six-month commitment. Four participants successfully engaged in the pilot. In this report, we provide the description of the pilot, participant performance results, costs and value to participants as well as outline some of the issues encountered through the pilot. Results show that participants chose to participate with storage and the value of CAISO settlements were significantly lower than the capacity payments provided by the utility as incentive payments. In addition, this pilot revealed issues both on the participant side and system operations side. These issues are summarized in the report.The Intermittent Renewable Management Pilot - Phase 2 (IRM2) was designed to study the feasibility of demand-side resources to participate into the California Independent System Operator (CAISO) wholesale market as proxy demand resources (PDR). The pilot study focused on understanding the issues related with

Nursing-led management of side effects of radiation: evidence-based recommendations for practice