WorldWideScience

Sample records for demand side measures

  1. Individual-motivational factors in the acceptability of demand-side and supply-side measures to reduce carbon emissions

    International Nuclear Information System (INIS)

    Poortinga, Wouter; Spence, Alexa; Demski, Christina; Pidgeon, Nick F.

    2012-01-01

    As more than a third of all carbon dioxide emissions in the UK are generated by the domestic sector, individuals need to make drastic changes to their current lifestyle in order to play their part in climate change mitigation. Not only do they need to change their personal behaviour, they also have to accept new low-carbon technologies in order to decarbonise the energy they are using. This study uses an adapted version of the Value–Belief-Norm (VBN) model () to examine individual-motivational factors in the acceptability of demand-side and supply-side strategies to reduce carbon emissions. The study found that environmental identity, climate change concern, and personal norms are all significantly associated with the acceptability of both demand-side measures and supply-side technologies. While personal values were also important, their associations were mediated by more specific factors. Overall, the adapted VBN model was better able to explain the acceptability of low-carbon behaviours than of low-carbon energy-supply technologies. Concern about energy security appeared to be of limited importance. It was negatively associated with the willingness to engage in low-carbon behaviours, suggesting that a shift in focus towards energy security issues may not necessarily help a transition to a low-carbon society. - Highlights: ► An adapted VBN model is proposed to study environmentally significant behaviour.► Environmental identity is important for both demand-side and supply-side measures.► Energy security concern is of limited importance to support for supply-side measures.► Energy security concern reduces the willingness to engage in low-carbon behaviours.

  2. Energy efficiency and demand side management. Complement or contradiction? The impact of energy efficiency measures on the potential for demand side management; Energieeffizienz und Lastflexibilisierung. Partner oder Gegenspieler? Der Einfluss von Energieeffizienzmassnahmen auf das Lastflexibilisierungspotenzial

    Energy Technology Data Exchange (ETDEWEB)

    Peraus, Sebastian [TU Muenchen (Germany). Maschinenwesen; Gruber, Anna; Roon, Serafin von [Forschungsgesellschaft fuer Energiewirtschaft mbH, Muenchen (Germany)

    2013-02-01

    The success of the so called ''Energiewende'' in Germany is based on two major elements: the improvements in energy efficiency and the increase of renewable energy sources (RES). But the supply of RES cannot always be regulated according to the electricity demand. As a result both flexible electricity generation and demand side management will become increasingly important. Consequently, it has to be discussed, whether the improvement of energy efficiency and demand side management could interfere. This publication will illustrate the possible impact of energy efficiency measures on the potential for demand side management.

  3. An Integrated Decentralized Energy Planning Model considering Demand-Side Management and Environmental Measures

    Directory of Open Access Journals (Sweden)

    Seyed Mahmood Kazemi

    2013-01-01

    Full Text Available Decentralized energy planning (DEP is looked upon as an indisputable opportunity for energy planning of villages, isolated islands, and far spots. Nonetheless, at this decentralized planning level, the value of demand-side resources is not fairly examined, despite enjoying great advantages. Therefore, the core task of this study is to integrate demand-side resources, as a competing solution against supply-side alternatives, with decentralized energy planning decisions and demonstrate the rewarding role it plays. Moreover, sustainability indicators (SIs are incorporated into DEP attempts in order to attain sustainable development. It is emphasized that unless these indicators are considered at lower energy planning levels, they will be ignored at higher planning levels as well. Hence, to the best knowledge of the authors, this study for the first time takes into account greenhouse gas (GHG emissions produced by utilization of renewable energies in DEP optimization models. To address the issues mentioned previously, multiobjective linear programming model along with a min-max goal programming approach is employed. Finally, using data taken from the literature, the model is solved, and the obtained results are discussed. The results show that DSM policies have remarkably contributed to significant improvements especially in terms of environmental indicators.

  4. An Improved Fuzzy C-Means Algorithm for the Implementation of Demand Side Management Measures

    Directory of Open Access Journals (Sweden)

    Ioannis Panapakidis

    2017-09-01

    Full Text Available Load profiling refers to a procedure that leads to the formulation of daily load curves and consumer classes regarding the similarity of the curve shapes. This procedure incorporates a set of unsupervised machine learning algorithms. While many crisp clustering algorithms have been proposed for grouping load curves into clusters, only one soft clustering algorithm is utilized for the aforementioned purpose, namely the Fuzzy C-Means (FCM algorithm. Since the benefits of soft clustering are demonstrated in a variety of applications, the potential of introducing a novel modification of the FCM in the electricity consumer clustering process is examined. Additionally, this paper proposes a novel Demand Side Management (DSM strategy for load management of consumers that are eligible for the implementation of Real-Time Pricing (RTP schemes. The DSM strategy is formulated as a constrained optimization problem that can be easily solved and therefore, making it a useful tool for retailers’ decision-making framework in competitive electricity markets.

  5. A scoping study: demand side measures on the UK electrical system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    The study is intended to eventually bring about a number of improvements in the UK electrical system, particularly in regard to Demand Side Management (DSM). Among the benefits envisaged are (a) increased security of supply when the network is under stress; (b) reduction in costs; (c) simpler outage management; (d) carbon saving and (e) increased energy efficiency. So far, these potential benefits have attracted little attention in the residential and small business sectors of the market: suggested reasons for this are listed. Taking into account the experience of other countries, three options are presented for a UK DSM programme: they are (i) customer initiated; (ii) supplier initiated and (iii) distributor initiated. At present, all the suggested options need further study and to aid the development for small customers, five possible initiatives are suggested. This final report (95 pages) includes a detailed description of the research required and a tender process for a customer-initiated programme. The report was prepared by KEMA Limited under contract to the DTI.

  6. A scoping study: demand side measures on the UK electrical system

    International Nuclear Information System (INIS)

    2005-01-01

    The study is intended to eventually bring about a number of improvements in the UK electrical system, particularly in regard to Demand Side Management (DSM). Among the benefits envisaged are (a) increased security of supply when the network is under stress; (b) reduction in costs; (c) simpler outage management; (d) carbon saving and (e) increased energy efficiency. So far, these potential benefits have attracted little attention in the residential and small business sectors of the market: suggested reasons for this are listed. Taking into account the experience of other countries, three options are presented for a UK DSM programme: they are (i) customer initiated; (ii) supplier initiated and (iii) distributor initiated. At present, all the suggested options need further study and to aid the development for small customers, five possible initiatives are suggested. This final report (95 pages) includes a detailed description of the research required and a tender process for a customer-initiated programme. The report was prepared by KEMA Limited under contract to the DTI

  7. Evaluating demand side measures in simulation models for the power market

    International Nuclear Information System (INIS)

    Wolfgang, Ove; Doorman, Gerard

    2011-01-01

    Increased energy efficiency is one of the pillars for reducing CO 2 emissions. However, in models for the electricity market like unit commitment and dispatch models, increased efficiency of demand results in a paradoxical apparent reduction of the total economic surplus. The reason is that these are partial models for the electricity market, which do not take into account the effect of the changes in other markets. This paper shows how the calculation of the consumer surplus in the electricity market should be corrected to take into account the effect in other markets. In different cases we study shifts in the demand curve that are caused by increased energy efficiency, reduced cost for substitutes to electricity and real-time monitoring of demand, and we derive the necessary correction. The correction can easily be included in existing simulation models, and makes it possible to assess the effect of changes in demand on economic surplus. (author)

  8. Comparing Demand Side Management approaches

    NARCIS (Netherlands)

    Molderink, Albert; Bakker, Vincent; Hurink, Johann L.; Smit, Gerardus Johannes Maria

    2012-01-01

    Due to increasing energy prices and the greenhouse effect, a more efficient energy supply is desirable, preferably based on renewable sources. To cope with the decrease of flexibility due to the introduction of renewables in production side of the supply chain, a more flexible consumer side is

  9. Towards demand-side solutions for mitigating climate change

    Science.gov (United States)

    Creutzig, Felix; Roy, Joyashree; Lamb, William F.; Azevedo, Inês M. L.; Bruine de Bruin, Wändi; Dalkmann, Holger; Edelenbosch, Oreane Y.; Geels, Frank W.; Grubler, Arnulf; Hepburn, Cameron; Hertwich, Edgar G.; Khosla, Radhika; Mattauch, Linus; Minx, Jan C.; Ramakrishnan, Anjali; Rao, Narasimha D.; Steinberger, Julia K.; Tavoni, Massimo; Ürge-Vorsatz, Diana; Weber, Elke U.

    2018-04-01

    Research on climate change mitigation tends to focus on supply-side technology solutions. A better understanding of demand-side solutions is missing. We propose a transdisciplinary approach to identify demand-side climate solutions, investigate their mitigation potential, detail policy measures and assess their implications for well-being.

  10. Data model for Demand Side Management

    Directory of Open Access Journals (Sweden)

    Simona-Vasilica OPREA

    2017-08-01

    Full Text Available Demand Side Management (DSM is a portfolio of measures to improve the energy system mainly at the consumption level. In this paper we propose a data model for DSM stating from the optimization methods approach in SMARTRADE project from different perspectives of several entities that include: Transmission System Operator (TSO/Distribution System Operators (DSOs perspectives in case of security/reliability concerns: minimum amount of load (or generation shedding; aggregators perspective in case of demand or generation shedding request: Which demand (or generators should be shed?; consumers perspective: load shifting (time-of-use (ToU tariffs and optimum contract strategies with the aggregators (also known as balancing responsible parties- BRP for load shedding.

  11. Communication technologies for demand side management

    Energy Technology Data Exchange (ETDEWEB)

    Uuspaeae, P [VTT Energy, Espoo (Finland)

    1998-08-01

    The scope of this research is data communications for electric utilities, specifically for the purposes of Demand Side Management (DSM). Demand Side Management has the objective to change the customer`s end use of energy in a manner that benefits both the customer and the utility. For example, peak demand may be reduced, and the peak demand may be relocated to off peak periods. Thus additional investments in generation and network may be avoided. A number of Demand Side Management functions can be implemented if a communication system is available between the Electric Utility and the Customer. The total communication capacity that is needed, will depend on several factors, such as the functions that are chosen for DSM, and on the number and type of customers. Some functions may be handled with one-way communications, while some other functions need to have two-way communication

  12. Emerging technologies for demand side management. Demand side management jitsugen no tame no saishin gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, H; Iyoda, I [Mitsubishi Electric Corp., Tokyo (Japan)

    1993-11-05

    This paper explains the latest situation in hardware technologies to realize the demand side management, divided into the following technologies: communications technology, measurement technology, client information system technology, load controlling technology, home automation technology, and energy storing and saving technologies. Speaking of the communications technology, information exchange between the supply side and the demand side is important in the demand side management, whereas a technology intended of automatic power distribution and automatic meter-reading is advancing in development. The technology covers transmissions using from power lines and telephone lines to optical cables and wireless communications. Power line communications using power transmission lines as communication lines are simple and economical, but weak against noise, and not suitable for long-distance communications. Wireless communications have been drawing attentions along with the development of mobile communication device technologies. These technologies will give benefits to electric power companies in the initial stage of their use, such as for load investigation and general automation in power distribution. They would shift to benefiting users in about 2010 covering from security information such as about power interruption to publicity information and educations. 8 refs., 8 figs., 1 tab.

  13. Demand Side Management for Multiple Devices

    NARCIS (Netherlands)

    Molderink, Albert; Bakker, Vincent; Smit, Gerardus Johannes Maria

    Steering a heterogeneous set of devices in a Smart Grid using cost functions: Demand Side Management (DSM) is an important element in smart grids. DSM is already in operation for large consumers, but thorough research is required into DSM on a building level within the distribution grid.

  14. Demand side management using profile steering

    NARCIS (Netherlands)

    Gerards, Marco Egbertus Theodorus; Toersche, Hermen; Hoogsteen, Gerwin; van der Klauw, Thijs; Hurink, Johann L.; Smit, Gerardus Johannes Maria

    2015-01-01

    Many Demand Side Management (DSM) approaches use energy prices as steering signals. This paper shows that such steering signals may result in power quality problems and high losses. As an alternative, this paper proposes to use desired (e.g., flat) power profiles as steering signals and presents an

  15. Evaluation of demand-side management programs

    International Nuclear Information System (INIS)

    Kolbe, A.L.; O'Loughlin, M.P.

    1990-01-01

    Over the past few years, the attention accorded to demand-side management (DSM) measures has called into question the traditional cost minimization approach for evaluating such programs. Two broad approaches to DSM seem to be generally used: one examining the problem from multiple perspectives and the other including various practical methods used in-house by utility planners. Whatever the standard used to evaluate DSM, there remains at least one problem which cannot be quantified. The customers who participate in a DSM program cannot only take into account the effects of DSM on their electricity bills; their comfort can also be affected. This lowering of comfort constitutes a legitimate cost which can explain why some apparently sensible DSM measures are not adopted. A method is proposed to incorporate this cost. It establishes a way to evaluate DSM program tradeoffs that, from the perspective of standard economic theory, maximizes social welfare; explains why at least one of the perspectives in the multiple perspective approach needs to be modified to incorporate all customer costs; and outlines how the proposed standard can be implemented. 8 refs

  16. Multiple policies to enhance prescribing efficiency for established medicines in Europe with a particular focus on demand-side measures: findings and future implications

    Directory of Open Access Journals (Sweden)

    Brian eGodman

    2014-06-01

    Full Text Available Introduction: The appreciable growth in pharmaceutical expenditure has resulted in multiple initiatives across Europe to lower generic prices and enhance their utilisation. However, considerable variation in their use and prices. Objective: Assess the influence of multiple supply and demand-side initiatives across Europe for established medicines to enhance prescribing efficiency before a decision to prescribe a particular medicine. Subsequently utilise the findings to suggest potential future initiatives that countries could consider. Method: Analysis of different methodologies involving cross national and single country retrospective observational studies on reimbursed use and expenditure of PPIs, statins and renin-angiotensin inhibitor drugs among European countries. Results: Nature and intensity of the various initiatives appreciably influenced prescribing behaviour and expenditure, e.g. multiple measures resulted in reimbursed expenditure for PPIs in Scotland in 2010 56% below 2001 levels despite a 3 fold increase in utilisation and in the Netherlands, PPI expenditure fell by 58% in 2010 vs. 2000 despite a 3-fold increase in utilisation. A similarly picture was seen with prescribing restrictions, i.e. (i more aggressive follow-up of prescribing restrictions for patented statins and ARBs resulted in a greater reduction in the utilisation of patented statins in Austria vs. Norway and lower utilisation of patented ARBs vs. generic ACEIs in Croatia than Austria. However, limited impact of restrictions on esomeprazole in Norway with the first prescription or recommendation in hospital where restrictions do not apply. Similar findings when generic losartan became available in Western Europe. Conclusions: Multiple demand-side measures are needed to influence prescribing patterns. When combined with supply-side measures, activities can realise appreciable savings. Health authorities cannot rely on a ‘spill over’ effect between classes to affect

  17. Industrial demand side management: A status report

    Energy Technology Data Exchange (ETDEWEB)

    Hopkins, M.F.; Conger, R.L.; Foley, T.J. [and others

    1995-05-01

    This report provides an overview of and rationale for industrial demand side management (DSM) programs. Benefits and barriers are described, and data from the Manufacturing Energy Consumption Survey are used to estimate potential energy savings in kilowatt hours. The report presents types and examples of programs and explores elements of successful programs. Two in-depth case studies (from Boise Cascade and Eli Lilly and Company) illustrate two types of effective DSM programs. Interviews with staff from state public utility commissions indicate the current thinking about the status and future of industrial DSM programs. A comprehensive bibliography is included, technical assistance programs are listed and described, and a methodology for evaluating potential or actual savings from projects is delineated.

  18. Primary Control by ON/OFF Demand-Side Devices

    DEFF Research Database (Denmark)

    Biegel, Benjamin; Hansen, Lars Henrik; Andersen, Palle

    2013-01-01

    We consider an aggregator managing a portfolio of ON/OFF demand-side devices. The devices are able to shift con- sumption in time within certain energy limitations; moreover, the devices are able to measure the system frequency and switch ON and OFF accordingly. We show how the aggregator can...

  19. Demand side management. Benefits and challenges

    International Nuclear Information System (INIS)

    Strbac, Goran

    2008-01-01

    In this paper, the major benefits and challenges of electricity demand side management (DSM) are discussed in the context of the UK electricity system. The relatively low utilisation of generation and networks (of about 50%) means that there is significant scope for DSM to contribute to increasing the efficiency of the system investment. The importance of the diversity of electricity load is discussed and the negative effects of DSM on load diversity illustrated. Ageing assets, the growth in renewable and other low-carbon generation technologies and advances in information and communication technologies are identified as major additional drivers that could lead to wider applications of DSM in the medium term. Potential benefits of DSM are discussed in the context of generation and of transmission and distribution networks. The provision of back-up capacity by generation may not be efficient as it will be needed relatively infrequently, and DSM may be better placed to support security. We also present an analysis of the value of DSM in balancing generation and demand in a future UK electricity system with significant variable renewable generation. We give a number of reasons for the relatively slow uptake of DSM, particularly in the residential, commercial and small business sectors. They include a lack of metering, information and communication infrastructure, lack of understanding of the benefits of DSM, problems with the competitiveness of DSM when compared with traditional approaches, an increase in the complexity of system operation and inappropriate market incentives. (author)

  20. Applying demand side management using a generalised grid supportive approach

    NARCIS (Netherlands)

    Blaauwbroek, N.; Nguyen, H.P.; Slootweg, J.G.

    2017-01-01

    Demand side management is often seen as a promising tool for distribution network operators to mitigate network operation limit violations. Many demand side management applications have been proposed, each with their own objectives and methodology. Quite often, these demand side management

  1. Promoting healthcare innovation on the demand side

    Science.gov (United States)

    Eisenberg, Rebecca S.

    2017-01-01

    Abstract Innovation policy often focuses on fortifying the incentives of firms that develop and sell new products by offering them lucrative rights to exclude competitors from the market. Regulators also rely on these same firms—and on similar incentives—to develop information about the effects of their products in patients, despite their obvious conflict of interest. The result may be a distorted understanding that leads to overuse of expensive new medical technologies. Recent technological advances have put healthcare payers in an excellent position to play a larger role in future innovation to improve healthcare and reduce its costs. Insurance companies and integrated healthcare providers have custody of treasure troves of data about healthcare provision and outcomes that can yield valuable insights about the effects of medical treatment without the need to conduct costly clinical trials. Some integrated healthcare systems have seized upon this advantage to make notable discoveries about the effects of particular products that have changed the standard of care. Moreover, to the extent that healthcare payers can profit from reducing costs, they will seek to avoid inappropriate use of costly technologies. Greater involvement of payers in healthcare innovation thus offers a potential counterweight to the incentives of product sellers to promote excessive use of costly new products. In recent years, the federal government has sought to promote innovation through analysis of healthcare records in a series of initiatives; some picture insurers as passive data repositories, while others provide opportunities for insurers to take a more active role in innovation. In this paper, we examine the role of health insurers in developing new knowledge about the provision and effects of healthcare—what we call ‘demand-side innovation’. We address the contours of this underexplored area of innovation and describe the behavior of participating firms. We examine the

  2. Market-pull report. Measures on the demand side accelerate development and market introduction of energy-saving technologies. Swiss examples in the international context

    International Nuclear Information System (INIS)

    Bachmann, C.; Aebischer, B.

    1995-09-01

    International Energy Agency (IEA) experts met in Zurich in order to further develop international projects for the coordinated procurement of energy-saving technologies. On the occasion of this meeting, Swiss specialists from business and administrative circles presented examples of how the market can be purposefully influenced by implementing measures on the demand side. In order to ensure success, it is vital that all parties concerned - from the manufacturers to the consumers - are taken into account, and that tools are applied that have been adapted to each individual market. An international coordination of activities that are aimed at bringing about a change in procurement behaviour contributes considerably to an acceleration of the various processes. For the manufacturers, most of whom are active on an international level, it becomes simpler and more worthwhile to react. This applies in particular when instruments such as quality seals (labels) and target values are applied. (author) figs., tabs

  3. Demand Side Management: An approach to peak load smoothing

    Science.gov (United States)

    Gupta, Prachi

    A preliminary national-level analysis was conducted to determine whether Demand Side Management (DSM) programs introduced by electric utilities since 1992 have made any progress towards their stated goal of reducing peak load demand. Estimates implied that DSM has a very small effect on peak load reduction and there is substantial regional and end-user variability. A limited scholarly literature on DSM also provides evidence in support of a positive effect of demand response programs. Yet, none of these studies examine the question of how DSM affects peak load at the micro-level by influencing end-users' response to prices. After nearly three decades of experience with DSM, controversy remains over how effective these programs have been. This dissertation considers regional analyses that explore both demand-side solutions and supply-side interventions. On the demand side, models are estimated to provide in-depth evidence of end-user consumption patterns for each North American Electric Reliability Corporation (NERC) region, helping to identify sectors in regions that have made a substantial contribution to peak load reduction. The empirical evidence supports the initial hypothesis that there is substantial regional and end-user variability of reductions in peak demand. These results are quite robust in rapidly-urbanizing regions, where air conditioning and lighting load is substantially higher, and regions where the summer peak is more pronounced than the winter peak. It is also evident from the regional experiences that active government involvement, as shaped by state regulations in the last few years, has been successful in promoting DSM programs, and perhaps for the same reason we witness an uptick in peak load reductions in the years 2008 and 2009. On the supply side, we estimate the effectiveness of DSM programs by analyzing the growth of capacity margin with the introduction of DSM programs. The results indicate that DSM has been successful in offsetting the

  4. Demand-side financing measures to increase maternal health service utilisation and improve health outcomes: a systematic review of evidence from low- and middle-income countries.

    Science.gov (United States)

    Murray, Susan F; Hunter, Benjamin M; Bisht, Ramila; Ensor, Tim; Bick, Debra

    2012-01-01

    In many countries financing for health services has traditionally been disbursed directly from governmental and non-governmental funding agencies to providers of services: the 'supply-side' of healthcare markets. Demand-side financing offers a supplementary model in which some funds are instead channelled through, or to, prospective users. In this review we considered evidence on five forms of demand-side financing that have been used to promote maternal health in developing countries: OBJECTIVES: The overall review objective was to assess the effects of demand-side financing interventions on maternal health service utilisation and on maternal health outcomes in low- and middle-income countries. Broader effects on perinatal and infant health, the situation of underprivileged women and the health care system were also assessed. This review considered poor, rural or socially excluded women of all ages who were either pregnant or within 42 days of the conclusion of pregnancy, the limit for postnatal care as defined by the World Health Organization. The review also considered the providers of services.The intervention of interest was any programme that incorporated demand-side financing as a mechanism to increase the consumption of goods and services that could impact on maternal health outcomes. This included the direct consumption of maternal health care goods and services as well as related 'merit goods' such as improved nutrition. We included systems in which potential users of maternal health services are financially empowered to make restricted decisions on buying maternal health-related goods or services - sometimes known as consumer-led demand-side financing. We also included programmes that provided unconditional cash benefits to pregnant women (for example in the form of maternity allowances), or to families with children under five years of age where there was evidence concerning maternal health outcomes.We aimed to include quantitative studies (experimental

  5. Coordinating Demand-Side Efficiency Evaluation, Measurement and Verification Among Western States: Options for Documenting Energy and Non-Energy Impacts for the Power Sector

    Energy Technology Data Exchange (ETDEWEB)

    Schiller, Steven R. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Schwartz, Lisa C. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2016-06-22

    Demand-side energy efficiency (efficiency) represents a low-cost opportunity to reduce electricity consumption and demand and provide a wide range of non-energy benefits, including avoiding air pollution. Efficiency-related energy and non-energy impacts are determined and documented by implementing evaluation, measurement and verification (EM&V) systems. This technical brief describes efficiency EM&V coordination strategies that Western states can consider taking on together, outlines EM&V-related products that might be appropriate for multistate coordination, and identifies some implications of coordination. Coordinating efficiency EM&V activities can save both time and costs for state agencies and stakeholders engaged in efficiency activities and can be particularly beneficial for multiple states served by the same utility. First, the brief summarizes basic information on efficiency, its myriad potential benefits and EM&V for assessing those benefits. Second, the brief introduces the concept of multistate EM&V coordination in the context of assessing such benefits, including achievement of state and federal goals to reduce air pollutants.1 Next, the brief presents three coordination strategy options for efficiency EM&V: information clearinghouse/exchange, EM&V product development, and a regional energy efficiency tracking system platform. The brief then describes five regional EM&V products that could be developed on a multistate basis: EM&V reporting formats, database of consistent deemed electricity savings values, glossary of definitions and concepts, efficiency EM&V methodologies, and EM&V professional standards or accreditation processes. Finally, the brief discusses options for next steps that Western states can take to consider multistate coordination on efficiency EM&V. Appendices provide background information on efficiency and EM&V, as well as definitions and suggested resources on the covered topics. This brief is intended to inform state public

  6. Cost benefit analysis of the demand side management programs

    International Nuclear Information System (INIS)

    Schechtman, R.; Baum, M.

    1989-01-01

    The several cost and benefit components of the demand side management programs for the society groups, including the concessionaire, consumers and society as a whole are studied. The rule evaluations of management programs by demand side, used by North American concessionaire are also discussed. Finally, the numerical examples, that consolidating the concepts and rules evaluation are presented. (C.G.C.). 5 refs, 1 fig, 3 tabs

  7. Using Demand Side Management to Adapt to Water Scarcity and ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    The Saiss is a sub-basin of the Sebou basin in Northern Morocco. Due to decreased precipitation and increased water demand, the surface waters of the Saiss basin have been greatly reduced. At the current rate of exploitation, the aquifer will be depleted within 25 years. This project will examine whether demand-side ...

  8. Physiological and skill demands of 'on-side' and 'off-side' games.

    Science.gov (United States)

    Gabbett, Tim J; Jenkins, David G; Abernethy, Bruce

    2010-11-01

    This study investigated the physiological and skill demands of 'on-side' and 'off-side' games in elite rugby league players. Sixteen male rugby league players participated in 'on-side' and 'off-side' games. Both small-sided games were played in a 40- × 40-m playing area. The 'off-side' game permitted players to have 3 'plays' while in possession of the ball. Players were permitted to pass backward or forward (to an 'off-side' player). The 'on-side' game also permitted players to have 3 'plays' while in possession of the ball. However, players were only permitted to pass backward to players in an 'on-side' position. Heart rate and movement patterns (via global positioning system) were recorded continuously throughout both games. Data were collected on the distance covered, number of high-acceleration and velocity efforts, and recovery between efforts. Video footage was also taken to track the performance of the players. Post hoc inspection of the footage was undertaken to count the number of possessions and the number and quality of disposals. In comparison to 'on-side' games, 'off-side' games had a greater number of involvements ("touches"), passes, and effective passes. However, the cognitive demands of 'on-side' games were greater than 'off-side' games. 'Off-side' games resulted in a greater total distance covered, greater distance covered in mild and moderate accelerations, and greater distance covered in low, moderate, and high-velocity efforts. There were also a greater number of short duration recovery periods between efforts in 'off-side' games. The results of this study demonstrate that 'off-side' games provide greater physiological and skill demands than 'on-side' games. 'Off-side' games may provide a practical alternative to 'on-side' games for the development of skill and fitness in elite rugby league players.

  9. Assessment of utility side financial benefits of demand side management considering environmental impacts

    Science.gov (United States)

    Abeygunawardane, Saranga Kumudu

    2018-02-01

    Any electrical utility prefers to implement demand side management and change the shape of the demand curve in a beneficial manner. This paper aims to assess the financial gains (or losses) to the generating sector through the implementation of demand side management programs. An optimization algorithm is developed to find the optimal generation mix that minimizes the daily total generating cost. This daily total generating cost includes the daily generating cost as well as the environmental damage cost. The proposed optimization algorithm is used to find the daily total generating cost for the base case and for several demand side management programs using the data obtained from the Sri Lankan power system. Results obtained for DSM programs are compared with the results obtained for the base case to assess the financial benefits of demand side management to the generating sector.

  10. History of demand side management and classification of demand response control schemes

    NARCIS (Netherlands)

    Lampropoulos, I.; Kling, W.L.; Ribeiro, P.F.; Berg, van den J.

    2013-01-01

    The scope of this paper is to provide a review on the topic of demand side management. A historical overview provides a critical insight to applied cases, while the discovery of new evidence calls for reconsideration of the design of demand response control schemes. The developments at the demand

  11. The Wisconsin experience with incentives for demand-side management

    International Nuclear Information System (INIS)

    Landgren, D.A.

    1990-01-01

    It has been noted that, within traditional regulatory frameworks for electric utilities, factors exist which discourage demand side management (DSM) and that there is a lack of positive incentives for DSM. Regulatory agencies should therefore make it possible for DSM measures to benefit from the same treatment as supply-side measures. The Wisconsin Public Service Commission (WPSC) has recognized this need and has adopted various measures accordingly. The need for efficiency incentives is described according to the particular experience of Wisconsin Electric concerning their recourse to a DSM incentive and according to new incentive models being tested in collaboration with other electricity suppliers in Wisconsin. The WPSC has concluded that the fact of considering the costs relating to DSM as expenses or capitalizing them within the rate base does not motivate the utility to promote DSM programs. The WPSC has thus decided to experiment with energy efficiency incentives in order to evaluate their eventual impact. The choice of the type of incentive had an objective of starting the process in an area where the lack of experience has created, from the regulatory point of view, a reticence on the part of utilities to engage in DSM programs. The WPSC has designed a variety of incentive models which have been adapted to each utility's own situation. Specific incentive programs developed for three Wisconsin utilities are reviewed

  12. Intelligent demand side management of residential building energy systems

    Science.gov (United States)

    Sinha, Maruti N.

    Advent of modern sensing technologies, data processing capabilities and rising cost of energy are driving the implementation of intelligent systems in buildings and houses which constitute 41% of total energy consumption. The primary motivation has been to provide a framework for demand-side management and to improve overall reliability. The entire formulation is to be implemented on NILM (Non-Intrusive Load Monitoring System), a smart meter. This is going to play a vital role in the future of demand side management. Utilities have started deploying smart meters throughout the world which will essentially help to establish communication between utility and consumers. This research is focused on investigation of a suitable thermal model of residential house, building up control system and developing diagnostic and energy usage forecast tool. The present work has considered measurement based approach to pursue. Identification of building thermal parameters is the very first step towards developing performance measurement and controls. The proposed identification technique is PEM (Prediction Error Method) based, discrete state-space model. The two different models have been devised. First model is focused toward energy usage forecast and diagnostics. Here one of the novel idea has been investigated which takes integral of thermal capacity to identify thermal model of house. The purpose of second identification is to build up a model for control strategy. The controller should be able to take into account the weather forecast information, deal with the operating point constraints and at the same time minimize the energy consumption. To design an optimal controller, MPC (Model Predictive Control) scheme has been implemented instead of present thermostatic/hysteretic control. This is a receding horizon approach. Capability of the proposed schemes has also been investigated.

  13. Examining the potential of natural gas demand-side measures to benefit customers, the distribution utility, and the environment: two case studies from Europe

    International Nuclear Information System (INIS)

    Almeida, A.T. de; Carvalho, A.; Mariano, J.; Broege, M.

    2004-01-01

    The aim of this paper is to demonstrate how integrated resource planning (IRP) oriented to the gas sector can be applied both in new networks and in mature networks, and to present the advantages of its application. One case study is described, in the western central region of Portugal, to illustrate the results of a pilot project on natural gas IRP implementation in a new network in the European Union (EU). The city of Burg, Germany, with a mature gas network with district heating was also analysed in terms of IRP potential. The most important phases of the integrated resource plan definition and implementation (especially those oriented to the demand-side) are presented, namely, the definition of the most efficient technologies (including solar energy), fuel-switching possibilities, a detailed study of the impacts in the economy, environment and society, and the policy incentives necessary to motivate the gas utility companies to perform IRP. In the main case study, the suggested implementation plan would lead to a reduction of around 4.7% in natural gas consumption. Additionally, 13.3% of cost-effective fuel switching from other competing forms of energy to natural gas can be achieved. A proposed EU energy services directive on mandatory energy-efficiency activities for gas and electricity distribution utilities in the EU, will promote the large-scale implementation of the proposed approach in Europe. (author)

  14. U.S. electric utility demand-side management 1995

    International Nuclear Information System (INIS)

    1997-01-01

    The US Electric Utility Demand-Side Management report is prepared by the Coal and Electric Data and Renewables Division; Office of Coal, Nuclear, Electric and Alternative Fuels; Energy Information Administration (EIA); US Department of Energy. The report presents comprehensive information on electric power industry demand-side management (DSM) activities in the US at the national, regional, and utility levels. The objective of the publication is to provide industry decision makers, government policy makers, analysts, and the general public with historical data that may be used in understanding DSM as it relates to the US electric power industry. The first chapter, ''Profile: US Electric Utility Demand-Side Management'', presents a general discussion of DSM, its history, current issues, and a review of key statistics for the year. Subsequent chapters present discussions and more detailed data on energy savings, peak load reductions and costs attributable to DSM. 9 figs., 24 tabs

  15. Real-Time Demand Side Management Algorithm Using Stochastic Optimization

    Directory of Open Access Journals (Sweden)

    Moses Amoasi Acquah

    2018-05-01

    Full Text Available A demand side management technique is deployed along with battery energy-storage systems (BESS to lower the electricity cost by mitigating the peak load of a building. Most of the existing methods rely on manual operation of the BESS, or even an elaborate building energy-management system resorting to a deterministic method that is susceptible to unforeseen growth in demand. In this study, we propose a real-time optimal operating strategy for BESS based on density demand forecast and stochastic optimization. This method takes into consideration uncertainties in demand when accounting for an optimal BESS schedule, making it robust compared to the deterministic case. The proposed method is verified and tested against existing algorithms. Data obtained from a real site in South Korea is used for verification and testing. The results show that the proposed method is effective, even for the cases where the forecasted demand deviates from the observed demand.

  16. Review of US utility demand-side bidding programs

    International Nuclear Information System (INIS)

    Goldman, C.A.; Kito, M.S.

    1995-01-01

    In this study, we review utility experiences with demand-side management (DSM) bidding programs. Since 1987, about 35 US utilities have signed long-term contracts with developers of DSM resources (ie energy service companies and customers) to provide a quantity of demand and energy savings at specified prices. Total resource costs range between 5.4 and 8 cents/kWh for DSM bidding programs where complete information on program costs is available. Almost all DSM bidding programs have been cost-effective compared with the utility's own supply-side alternatives, although there is substantial disagreement regarding the value of these programs compared with the utility's own DSM programs. In most bidding programs, payments to bidders account for between 70 and 90% of total program costs. Variation in winning bid prices is influenced primarily by DSM bid ceiling prices, differences in the mix of measures and markets targeted by developers, and the degree of performance risk borne by the DSM developer. Bids targeting residential customers averaged 6.2 cents/kWh compared with about 5.0 cents/kWh for commercial/industrial bids. We also compared the costs of acquiring lighting savings in DSM bidding contracts with a sample of 20 utility sponsored commercial/industrial lighting programs. We found that, on average total resource costs were slightly higher in bidding programs (6.1 vs 5.6 cents/kWh), although ratepayers bear significantly less performance risk in bidding programs compared with traditional utility-sponsored DSM programs. (author)

  17. Impact of Demand Side Management in Active Distribution Networks

    DEFF Research Database (Denmark)

    Ponnaganti, Pavani; Bak-Jensen, Birgitte; Pillai, Jayakrishnan Radhakrishna

    2017-01-01

    Demand Side Management (DSM) is an efficient flexible program which helps distribution network operators to meet the future critical peak demand. It is executed in cases of not only technical issues like voltage sag or swell, transformer burdening, cable congestions, but also to increase the degree...... of visibility in the electricity markets. The aim of this paper is to find the optimal flexible demands that can be shifted to another time in order to operate the active distribution system within secure operating limits. A simple mechanism is proposed for finding the flexibility of the loads where electric...

  18. Balancing islanded residential microgrids using demand side management

    NARCIS (Netherlands)

    Hoogsteen, Gerwin; van der Klauw, Thijs; Molderink, Albert; Hurink, Johann L.; Smit, Gerardus Johannes Maria; Feng, Xianyong; Hebner, Robert E.

    2016-01-01

    Now that the internet of things is emerging, control of domestic assets within the smart micro grids is also gaining interest. Furthermore, these micro grids may operate in islanded mode for short periods. Various demand side management approaches are presented in literature to control these assets.

  19. Load building versus conservation as demand-side management objectives

    International Nuclear Information System (INIS)

    Kexel, D.T.

    1994-01-01

    This paper examines the economics of load building versus conservation as demand-side management objectives. Economic criteria to be used in evaluating each type of program from the perspectives of all impacted parties are provided. The impact of DSM programs on electric rates is shown to be a key focal point of a thorough evaluation

  20. Using demand-side management to decrease transformer ageing

    NARCIS (Netherlands)

    van der Klauw, Thijs; Gerards, Marco Egbertus Theodorus; Hurink, Johann L.

    2016-01-01

    The introduction of local, often uncontrollable, generation units as well as larger loads such as electric vehicles (EVs) causes an increasing amount of stress on our energy supply chain, specifically on the distribution grids. Demand-side management (DSM) is often seen as a potential technology to

  1. Demand side integration aspects in active distribution planning

    DEFF Research Database (Denmark)

    Silvestro, Federico; Baitch, Alex; Pilo, Fabrizio

    2013-01-01

    will be implemented in practice? How will regulatory frameworks and connection agreements evolve to support ADSs? The present work provides some information about the closer and closer integration between network planning and Demand Side Integration that is foreseen in the future and shows the necessity to develop...

  2. Essays on measurement and evaluation of demand side management programs in the electricity industry, and impacts of firm strategy on stock price in the biotechnology industry

    Science.gov (United States)

    Bandres Motola, Miguel A.

    Essay one estimates changes in small business customer energy consumption (kWh) patterns resulting from a seasonally differentiated pricing structure. Econometric analysis leverages cross-sectional time series data across the entire population of affected customers, from 2007 through the present. Observations include: monthly energy usage (kWh), relevant customer segmentations, local daily temperature, energy price, and region-specific economic conditions, among other variables. The study identifies the determinants of responsiveness to seasonal price differentiation. In addition, estimated energy consumption changes occurring during the 2010 summer season are reported for the average customer and in aggregate grouped by relevant customer segments, climate zone, and total customer base. Essay two develops an econometric modeling methodology to evaluate load impacts for short duration demand response events. The study analyzes time series data from a season of direct load control program tests aimed at integrating demand response into the wholesale electricity market. I have combined "fuzzy logic" with binary variables to create "fuzzy indicator variables" that allow for measurement of short duration events while using industry standard model specifications. Typically, binary variables for every hour are applied in load impact analysis of programs dispatched in hourly intervals. As programs evolve towards integration with the wholesale market, event durations become irregular and often occur for periods of only a few minutes. This methodology is innovative in that it conserves the degrees of freedom in the model while allowing for analysis of high frequency data using fixed effects. Essay three examines the effects of strategies, intangibles, and FDA news on the stocks of young biopharmaceutical firms. An event study methodology is used to explore those effects. This study investigates 20,839 announcements from 1990 to 2005. Announcements on drug development

  3. An energy service company's perspective on demand-side management

    International Nuclear Information System (INIS)

    Bullock, C.G.

    1993-01-01

    In 1985, Massachusetts Electric Company held a bid for demand reduction to be supplied by energy service companies (ESCOs). It was one of the first demand-side management (DSM) bidding programs held in the United States. Since then, several DSM auctions have been held. Many people expected DSM bidding to be a key component in integrated resource planning. Many observed similarities with supply side bidding, and expected DSM bidding to grow according. Today, more than $2 billion annually is being spent by utilities on DSM programs. Less than $100 million is spent with ESCOs. This chapter explores some of the reasons for the current situation and suggests some alternatives, which could benefit all of the players

  4. Electricity deregulation, spot price patterns and demand-side management

    International Nuclear Information System (INIS)

    Li, Y.; Flynn, P.C.

    2006-01-01

    This paper examines extensive hourly or half-hourly power price data from 14 deregulated power markets. It analyzes average diurnal patterns, relationship to system load, volatility, and consistency over time. Diurnal patterns indicate the average price spread between off-peak and on-peak and weekend vs. weekday power consumption. Volatility is measured by price velocity: the average normalized hourly change in power price, calculated daily. The calculated price velocity is broken down into an expected component that arises from the diurnal pattern and an unexpected component that arises from unknown factors. The analysis reveals significant differences among markets, suggesting that demand-side management (DSM) of power consumption is far more difficult in some markets than in others. At one extreme, Spain, Britain and Scandinavia show consistent diurnal price patterns, a stable relationship between price and system load, and a low unexplained component of price volatility. A power consumer in these markets could form a reasonable expectation of a reward for DSM of elective power consumption. At the other extreme, two markets in Australia show erratic diurnal price patterns from year to year, low correlation between price and system load, and a high amount of unexpected price velocity. A power consumer in these markets would have far greater difficulty in realizing a benefit from DSM. Markets that experienced one period of very high prices without a clear external cause, such as California and Alberta, appear to have a significant longer-term erosion of public support for deregulation. (author)

  5. Internet of Things, Challenges for Demand Side Management

    Directory of Open Access Journals (Sweden)

    Simona-Vasilica OPREA

    2017-01-01

    Full Text Available The adoption of any new product means also the apparition of new issues and challenges, and this is especially true when we talk about a mass adoption. The advent of Internet of Things (IoT devices will be, in the authors of this paper opinion, the largest and the fastest product adoption yet to be seen, as several early sources were predicting a volume of 50 billion IoT devices to be active by 2020 [1][2]. While later forecasts reduced the predicted amount to about 20-30 billion devices [3], even for such “reduced” number, demand side management issues are foreseeable, for the potential economic impact of IoT applications in 2025 will be between 3.9 and $11.1 trillion USD [4]. Not only that new patterns will emerge in energy consumption and Internet traffic, but we predict that the sheer amount of data produced by this quantity of IoT devices will give birth to a new sort of demand side management, the demand side management of IoT data. How will this work is yet to be seen but, at the current moment, one can at least identify the bits and pieces that will constitute it. This paper is intended to serve as short guide regarding the possible challenges raised by the adoption of IoT devices. The data types and structures, lifecycle and patterns will be briefly discussed throughout the following article.

  6. Demand-Side Flexibility for Energy Transitions: Policy Recommendations for Developing Demand Response

    OpenAIRE

    Nursimulu, Anjali; Florin, Marie-Valentine; Vuille, François

    2016-01-01

    As a follow-up to IRGC's report on demand-side flexibility for energy transitions, this Policy Brief highlights that increasing flexibility in power systems is needed to accommodate higher shares of non-controllable and intermittent renewable generation, and that this requires changes to the market design and regulatory framework, to facilitate the development and deployment of appropriate technologies and market-based instruments (e.g. taxes and subsidies). The Policy Brief focuses on demand...

  7. Demand-side management process evaluations - the management perspective

    International Nuclear Information System (INIS)

    Perrault, G.A.; Barrett, L.B.

    1993-01-01

    A demand-side management (DSM) process evaluation is a qualitative, expert assessment of how a utility marketing program is being conducted. It reviews the efficiency and effectiveness in which a utility plans, manages, executes, and monitors the delivery of DSM programs to its marketplace. Process evaluations,which includes load impact, customer satisfaction and cost-effectiveness analysis, are becoming an increasingly significant component. The process evaluation focus is on the program planning and delivery process as opposed to the energy impacts resulting from the specific measures or products of the program. Because of this process-oriented focus, such evaluations can identify important opportunities for improving the cost-effectiveness of a program without significantly changing product lines. The evaluation may identify administrative or delivery process improvements. In addition, the evaluation may identify ways of improving the degree to which the customer is satisfied with the program or the utility. Since process evaluations are usually conducted as part of a utility's mandated DSM measurement and evaluation plan, they tend to focus mainly on the stated needs of the regulator as opposed to company management. This can be a problem. Although the regulatory perspective is important, in an increasingly competitive business environment, utilities must not overlook management's business and operational needs for specific information regarding DSM program planning, control, execution, and evaluation. This paper discusses some of the conflicts that exist between the regulator's and management's needs for DSM program evaluation results and presents some approaches for assuring that both needs are met. It is organized to first discuss the scope of a process evaluation, then the evaluation issues, the management concerns, and finally reporting of results

  8. Indirect Control for Demand Side Management – A Conceptual Introduction

    DEFF Research Database (Denmark)

    Heussen, Kai; You, Shi; Biegel, Benjamin

    2012-01-01

    The concept of “indirect control” has become a relevant discussion term in relation to activation distributed and small-scale demand and generation units to provide resources for power system balancing. The term and its association with price signals has, however caused some confusion as to its...... correct definition, either as a control or a market concept. This paper aims to provide a conceptual introduction to "indirect control" for management of small and distributed demand side resources. A review of control concepts and an analysis of "indirectness" features are provided to create a framework...... for systematic classification of indirect control strategies. The concepts developed then enable a discussion of control performance and valuation of direct- and indirect control strategies....

  9. Air pollution impacts from demand-side management

    International Nuclear Information System (INIS)

    Hall, D.C.; Sandii Win, M.; Hall, J.V.

    1995-01-01

    Air-polluting emission rates and energy-efficiency ratings vary widely among power plants, depending on location, age and whether the power plant is repowered. Traditional regulations require installation of specified emission control equipment that varies among power plants. These regulations do not specify that utilities first dispatch the cleanest power plants as demand varies from peak to off-peak periods. This empirical analysis shows, for 2 years out of 20, that demand-side management (DSM) programs increase air pollution. One reason for this result is that regulations require installation of specific emission-control technology but do not provide the incentive to take actual emissions or their air quality impacts into account when operating the system. For certain types of air pollutants and in some regions, regulatory programs now include markets for tradable emission credits. Such programs may alter this incentive. (author)

  10. Decision support program for congestion management using demand side flexibility

    DEFF Research Database (Denmark)

    Esmat, Ayman; Pinson, Pierre; Usaola, Julio

    2017-01-01

    In the past decades, Distribution System Operators (DSOs) have been mitigating distribution networks (DNs) contingencies by opting to grid reinforcements. However, this approach is not always cost and time efficient. Demand Side Flexibility (DSF) is one of the recent alternatives used in DNs cong...... effect is taken into consideration as well as the uncertain behavior of customers. Finally, the distribution grid of the Danish Bornholm Island is used to illustrate the merits of the DSP. The total cost incurred by the DSO is calculated and presented.......In the past decades, Distribution System Operators (DSOs) have been mitigating distribution networks (DNs) contingencies by opting to grid reinforcements. However, this approach is not always cost and time efficient. Demand Side Flexibility (DSF) is one of the recent alternatives used in DNs...... congestion management. Consequently, new market players such as aggregators are needed to handle DSF transaction between customers and DSOs. This paper proposes and models a decision support program (DSP) to optimize the total cost charged by the DSO for using DSF services. Moreover, the energy rebound...

  11. Deep Neural Network Based Demand Side Short Term Load Forecasting

    Directory of Open Access Journals (Sweden)

    Seunghyoung Ryu

    2016-12-01

    Full Text Available In the smart grid, one of the most important research areas is load forecasting; it spans from traditional time series analyses to recent machine learning approaches and mostly focuses on forecasting aggregated electricity consumption. However, the importance of demand side energy management, including individual load forecasting, is becoming critical. In this paper, we propose deep neural network (DNN-based load forecasting models and apply them to a demand side empirical load database. DNNs are trained in two different ways: a pre-training restricted Boltzmann machine and using the rectified linear unit without pre-training. DNN forecasting models are trained by individual customer’s electricity consumption data and regional meteorological elements. To verify the performance of DNNs, forecasting results are compared with a shallow neural network (SNN, a double seasonal Holt–Winters (DSHW model and the autoregressive integrated moving average (ARIMA. The mean absolute percentage error (MAPE and relative root mean square error (RRMSE are used for verification. Our results show that DNNs exhibit accurate and robust predictions compared to other forecasting models, e.g., MAPE and RRMSE are reduced by up to 17% and 22% compared to SNN and 9% and 29% compared to DSHW.

  12. Adaptive heat pump and battery storage demand side energy management

    Science.gov (United States)

    Sobieczky, Florian; Lettner, Christian; Natschläger, Thomas; Traxler, Patrick

    2017-11-01

    An adaptive linear model predictive control strategy is introduced for the problem of demand side energy management, involving a photovoltaic device, a battery, and a heat pump. Moreover, the heating influence of solar radiation via the glass house effect is considered. Global sunlight radiation intensity and the outside temperature are updated by weather forecast data. The identification is carried out after adapting to a time frame witch sufficiently homogeneous weather. In this way, in spite of the linearity an increase in precision and cost reduction of up to 46% is achieved. It is validated for an open and closed loop version of the MPC problem using real data of the ambient temperature and the global radiation.

  13. Development of planning methods for demand-side management (DSM)

    International Nuclear Information System (INIS)

    Kaerkkaeinen, S.; Kekkonen, V.; Rissanen, P.

    1995-01-01

    The interest of utilities and governmental agencies in Demand-side management (IDSM) and Integrated Resource Planning (IRP) has increased during recent years also in Finland. From the governmental point of view, the main reason for this has been concern about the environmental effects of electricity supply and consumption. Utilities are mainly interested in cost reductions in electricity supply and distribution caused by DSM. Also improved service to the customer due to DSM has increasing value to utilities. In this project, the main target has been to develop and assess methods for DSM planning from the utility point of view. The final goal is to integrate these methods into the strategic planning of electric utilities

  14. Modeling Supermarket Refrigeration Systems for Demand-Side Management

    Directory of Open Access Journals (Sweden)

    Jakob Stoustrup

    2013-02-01

    Full Text Available Modeling of supermarket refrigeration systems for supervisory control in the smart grid is presented in this paper. A modular modeling approach is proposed in which each module is modeled and identified separately. The focus of the work is on estimating the power consumption of the system while estimating the cold reservoir temperatures as well. The models developed for each module as well as for the overall integrated system are validated by real data collected from a supermarket in Denmark. The results show that the model is able to estimate the actual electrical power consumption with a high fidelity. Moreover a simulation benchmark is introduced based on the produced model for demand-side management in smart grid. Finally, a potential application of the proposed benchmark in direct control of the power/energy consumption is presented by a simple simulation example.

  15. Demand-side management: The perspective of a combination utility

    International Nuclear Information System (INIS)

    Packard, C.P.

    1993-01-01

    During the 1980's, Baltimore Gas ampersand Electric (BG ampersand E) met part of the rapid growth in demand for electricity in its service territory by implementing cost-effective demand-side management (DSM) programs--specifically, peak shaving and load shifting strategies. BG ampersand E's focus in the 1990's has been expanded to include all DSM options with an increasing emphasis on those which promote overall 1 energy efficiency or strategic conservation. This change in focus is being driven by Federal legislation, state regulatory requirements and the perceived potential benefits for both the customer and the Company. Current activities related to DSM include involvement in a Collaborative Process to design cost-effective electric and gas conservation programs for all customer classes--low-income, residential, commercial and industrial. Program design consists of four steps: (1) data gathering and technology assessment; (2) development of program concepts; (3) detailed program design and (4) monitoring and evaluation. Significant reductions in the projected peaks as well as in sales in future years are the anticipated results of our efforts. As a combination utility, unique opportunities and challenges face BG ampersand E: fuel switching, eligibility of non-full requirements customers, and energy options for customers

  16. Who should pay for demand-side management programs?

    International Nuclear Information System (INIS)

    Flaim, T.

    1992-01-01

    Traditional utility resource planning involves taking the load forecast as a given and then determining the additional supply resources expected to serve that load at minimum cost and optimal levels of reliability. With integrated planning, the goal is still to balance supply and demand, but in a way that is most cost effective given all possible ways to serve customers' energy service needs. The new element in integrated resource planning is demand side management (DSM) or activities aimed at altering the quantity of energy customers use and/or the timing of their consumption. This paper discusses how DSM works to accomplish energy conservation and how it affects the rate structure. It also goes on to discuss how a utility can optimize the participation in a conservation program so that no particular group might have to carry the brunt of a rate increase. These suggestions include aligning rates to accurately reflect marginal costs; require participating customers to pay as many program costs as are possible; where participating customers can't pay full cost of a program, restrict costs to those groups who are eligible to participate; and offer a 'reverse shared-savings' program to the largest customers. The paper goes on to discuss electric-to-gas fuel switching and what customers should carry the cost burden for this type of switching

  17. Demand-side management pricing options in electric utilities

    International Nuclear Information System (INIS)

    Sardana, P.; Herman, P.

    1990-01-01

    In 1989 Ontario Hydro implemented optional time-of-use (TOU) rates at the wholesale level for all municipal utilities in the province. At the same time, mandatory TOU rates were implemented for large users (customers with loads in excess of 5 MW) served by municipal utilities and Ontario Hydro's direct customers. To fully explore the potential of rate structures as demand-side management (DSM) tools, Ontario Hydro retained a consulting firm to carry out a survey of innovative rate structures in other jurisdications. The survey was intended to identify: the status quo of rate structures in other jurisdictions that were designed specifically to encourage DSM; a profile of the cost basis of the rate structures, for example whether traditional embedded cost of service analyses or contentious methods such as marginal cost pricing were used; whether innovative rates have been successful, and customer reactions and attitudes; and how innovative rates fit into the overall strategy of the utilities. It was found that TOU, interruptible and end-use targeted rates are the rate structures of choice for many utilities. Most are concerned with deferring capacity, reducing peak demand, and shifting load out of peak periods. Most utilities report success with their programs and satisfaction with the present form of the programs. 5 tabs

  18. Design of demand side response model in energy internet demonstration park

    Science.gov (United States)

    Zhang, Q.; Liu, D. N.

    2017-08-01

    The implementation of demand side response can bring a lot of benefits to the power system, users and society, but there are still many problems in the actual operation. Firstly, this paper analyses the current situation and problems of demand side response. On this basis, this paper analyses the advantages of implementing demand side response in the energy Internet demonstration park. Finally, the paper designs three kinds of feasible demand side response modes in the energy Internet demonstration park.

  19. Determining optimum levels of DSM [demand-side management] as a supply-side resource

    International Nuclear Information System (INIS)

    Giles, S.H.; Mitchell, E.D.

    1990-01-01

    San Diego Gas and Electric Company (SDGE) recommends the evaluation of demand-side management as a supply-side resource. The advantages of concurrent economic analysis of DSM options with other traditional sources represents a significant improvement over analysis either before or after the development of a resource plan. The evaluation of utility-sponsored DSM programs that provide system benefits that include deferment of capacity additions and improvements in more efficient system operation should be evaluated side-by-side with traditional resources that provide similar benefits. The utility decision to either provide capital costs to construct a power plant or make demand payments for a power purchase is directly analogous to the decision to provide funding for a DSM program that would defer these same investments. Both types of decision represent utility control over investment decisions that allow the utility to provide reliable, low-cost power to its customers. SDGE has also had experience with using generation expansion scenarios to test different levels of pre-selected packages of DSM programs, attempting to evaluate the total costs of system expansion for each of the different packages. This method was fraught with problems, and the best information that could be gained was if the selection of DSM packages happened to bracket a lower cost scenario, when it could reasonably be assumed that both smaller and larger levels of DSM were not as cost effective as the intermediate level. However, in many cases the selection of DSM programs did not produce this result and the important question of whether individual DSM programs were worthwhile when evaluated individually, or whether the lowest cost scenario would be improved with more or less DSM, could not be answered

  20. Demand-side management and demand response in the Ontario energy sectors

    International Nuclear Information System (INIS)

    2003-01-01

    In June 2003, the Ontario Energy Board was asked by the Minister of Energy to identify and review options for the delivery of demand-side management (DSM) and demand response (DR) activities within the electricity sector, by consulting with stakeholders. The role of local distribution company (distributor) in such activities was also to be determined. The objective was to balance implementation costs with the benefits to consumers and the entire system. The preliminary research and ideas were presented in this discussion paper. Definitions of both DSM and DR were provided, followed by an overview of economic theory and competitive markets. The framework for discussion was presented, along with a list of issues and other considerations. A spectrum of potential approaches to a DSM and DR framework was included and jurisdictional examples provided. A brief overview of the concept of load aggregation was presented and the next steps for consultations were outlined. 30 refs., 7 tabs

  1. Effects of utility demand-side management programs on uncertainty

    International Nuclear Information System (INIS)

    Hirst, E.

    1994-01-01

    Electric utilities face a variety of uncertainties that complicate their long-term resource planning. These uncertainties include future economic and load growths, fuel prices, environmental and economic regulations, performance of existing power plants, cost and availability of purchased power, and the costs and performance of new demand and supply resources. As utilities increasingly turn to demand-side management (DSM) programs to provide resources, it becomes more important to analyze the interactions between these programs and the uncertainties facing utilities. This paper uses a dynamic planning model to quantify the uncertainty effects of supply-only vs DSM + supply resource portfolios. The analysis considers four sets of uncertainties: economic growth, fuel prices, the costs to build new power plants, and the costs to operate DSM programs. The two types of portfolios are tested against these four sets of uncertainties for the period 1990 to 2010. Sensitivity, scenario, and worst-case analysis methods are used. The sensitivity analyses show that the DSM + supply resource portfolio is less sensitive to unanticipated changes in economic growth, fuel prices, and power-plant construction costs than is the supply-only portfolio. The supply-only resource mix is better only with respect to uncertainties about the costs of DSM programs. The base-case analysis shows that including DSM programs in the utility's resource portfolio reduces the net present value of revenue requirements (NPV-RR) by 490 million dollars. The scenario-analysis results show an additional 30 million dollars (6%) in benefits associated with reduction in these uncertainties. In the worst-case analysis, the DSM + supply portfolio again reduces the cost penalty associated with guessing wrong for both cases, when the utility plans for high needs and learns it has low needs and vice versa. 20 refs

  2. DSM [demand-side management] financing: Risks and incentives

    International Nuclear Information System (INIS)

    Dayton, D.S.

    1992-01-01

    Opportunities to make investments in demand side management (DSM) are widespread, especially among large, complex, energy-intensive customers. Acceptable economics are found for energy efficiency improvements, new construction or renovation, replacement of failing or obsolete equipment, and retrofit of existing facilities with more efficient equipment and operations. Market imperfections and technical limitations intrude on the DSM investment process. These intrusions are examined from a financial viewpoint by considering the return on investment and risks faced by the three potential investors in DSM opportunities: the customer, the utility, and the third party contractor or financier. These risks are illustrated by examining the cash flow of a typical project depicting a comprehensive energy efficiency installation in a medium to large industrial or institutional facility. The spread between the customer's risk/return ratio and that of the other two investors is shown to be surprisingly large. A utility role in marketing and financing, as opposed to direct subsidizing of customers or direct purchase of DSM resources from third parties, is explored as an efficient response to these realities. 2 figs., 3 tabs

  3. Economic profitability analysis of demand side management program

    International Nuclear Information System (INIS)

    Sheen, J.N.

    2005-01-01

    This study considers both the internal and external costs of the utility in deriving the avoided capacity cost (ACC) and avoided operating cost (AOC) induced in an electric utility caused by the implementation of a demand side management program (DSM). In calculating the ACC, a multiple objective linear programming model is developed. Meanwhile, the AOC is calculated by considering the differences between the total and specific time period energy consumption ratios before and after the implementation of the DSM program. This study also develops an economic analysis method using Net Present Value and Pay Back Year models to assess the economic profitability of implementing a DSM program from a participant's point of view. The design and construction of a partial load leveling eutectic salt Cooling Energy Storage (CES) air conditioning system in a target office building in Kaohsiung, Taiwan, is discussed in order to simulate the cost benefit of the CES system from the perspective of the utility and from that of the participant. The results confirm the effectiveness of the developed models in simulating the economic benefits of implementing a DSM program from the perspectives of both the utility and the participant

  4. Demand side management at Enbridge and best practices in Canada

    Energy Technology Data Exchange (ETDEWEB)

    Hunt, K.; Griffin, B. [Enbridge Gas Distribution, Toronto, ON (Canada)

    2004-07-01

    In 1994, the Ontario Energy Board required that gas utilities implement DSM programs for all customers. Enbridge began delivering demand side management (DSM) programs in 1995. DSM is now fully integrated with marketing. DSM programs are delivered across the residential, commercial, industrial, and multi-residential sectors. In 1997, Enbridge introduced the Steam Saver Program for customers who own mid-sized and large steam boilers. The program is now saving customers over 41 million cubic metres of gas per year, representing over $10 million annually. Steam boiler plants burn 30 per cent of all fuel in Ontario. They include natural gas, oil, wood or coal. This paper included a table listing the annual fuel consumption and cost for 1,200 boiler plants in Ontario. The Steam Saver Program identified steam efficiency projects in the customer's plant, provided a business case for the customer and provided technical and financial help to implement the project. The average financial payback on steam efficiency projects is 1.7 years. This paper also described Enbridge's Natural Gas Construction Heater Program for new residential construction markets. The program promotes the benefits of natural gas construction heaters as an alternative to propane salamanders for curing concrete walls in basements, drywall drying, and thawing soil for basement floors before pouring concrete. The natural gas construction heaters are also more suitable for heating the home before a central furnace system is activated. 3 tabs., 6 figs.

  5. Demand side management in households. Potentials and restraints of short-term power supply; Demand Side Management in Haushalten. Potenziale und Hemmnisse fuer kurzfristige Leistungsbereitstellung

    Energy Technology Data Exchange (ETDEWEB)

    Roon, Serafin von; Gobmaier, Thomas [FfE Forschungsstelle fuer Energiewirtschaft e.V., Muenchen (Germany); Huck, Malte

    2010-07-01

    Within the project ''Wind energy - balancing forecast errors'' we examine potentials, restraints and costs of various options for balancing forecast errors of wind power generation. One possibility of providing this backup power could be to practice Demand Side Management (DSM) of household appliances. The integration of these appliances in a DSM network is facilitated by standardized data transmission procedures and the increasing deployment of microprocessors. Due to the low power consumption of the switchable devices no DSM measures are implemented in the household sector so far, despite the numerous appliances. (orig.)

  6. R and D options for demand side management in Japanese electric utilities

    International Nuclear Information System (INIS)

    Yamamoto, T.

    1995-01-01

    Japanese electric utilities are facing several problems: increasing construction cost of power facilities, siting constraints and the environmental issue of greenhouse gas emissions. To overcome these problems, electric utilities have been promoting demand-side-management (DSM) activities as well as supplier-side measures, with some presently being carried out through promoting energy conservation technologies and introducing tariff options for residential/commercial and industrial consumers. R and D works have been carried out on various fields such as energy storage and heat storage which contribute to the improvement of the load factor. 5 figs., 2 tabs

  7. Demand-side management and demand response in the Ontario energy sectors

    International Nuclear Information System (INIS)

    2004-01-01

    A directive from the former Minister of Energy was received by the Ontario Energy Board (OEB), directing the Board to consult with stakeholders on options for the delivery of demand-side management (DSM) and demand response (DR) activities within the electricity sector, including the role of local distribution companies in such activities. The implementation costs were to be balanced with the benefits to both consumers and the entire system. The scope of the review was expanded by the Board to include the role of gas distribution companies in DSM. A consultation process was implemented and stakeholders were invited to participate. A series of recommendations was made, including: (1) a hybrid framework utilizing market-based and public-policy approaches should deliver DSM and DR activities in Ontario's energy markets, (2) DSM and DR activities should come under the responsibility of a central agency, (3) DSM and DR activities should be coordinated through cooperation between the Ministry of Energy, the Independent Electricity Market Operator (IMO) and the Ontario Energy Board, (4) regulatory mechanisms to induce gas distributors, electricity transmitters and electricity distributors to reduce distribution system losses should be put in place, (5) all electricity consumers should fund electricity DSM and some retail DR initiatives through a transparent, non-bypassable consumption charge, and (6) the Board should design, develop and deliver information to consumers regarding energy conservation, energy efficiency, load management, and cleaner sources of energy. refs., 4 figs

  8. R and D options for demand side management in Japanese electric utilities

    International Nuclear Information System (INIS)

    Yamamoto, Takahiko

    1996-01-01

    Japanese electric demand has been steadily increasing in accordance with the economic growth. However, Japanese electric utilities are facing several problems; increasing construction cost of power facilities, siting constraints and the environmental issue of greenhouse gas emissions. To overcome these problems, electric utilities have been promoting demand-side-management (DSM) activities as well as supplier-side measures, with some presently being carried out through promoting energy conservation technologies and introducing electric tariff options of specific contracts for residential/commercial and industrial consumers. Japanese electric utilities have been carrying out R and D for the future, in particular, energy storage and heat storage which contribute to the improvement of load factor. In this paper, I would like to outline the R and D options for DSM in Japan. (author)

  9. Impacts of Demand-Side Resources on Electric Transmission Planning

    Energy Technology Data Exchange (ETDEWEB)

    Hadley, Stanton W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Sanstad, Alan H. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2015-01-01

    Will demand resources such as energy efficiency (EE), demand response (DR), and distributed generation (DG) have an impact on electricity transmission requirements? Five drivers for transmission expansion are discussed: interconnection, reliability, economics, replacement, and policy. With that background, we review the results of a set of transmission studies that were conducted between 2010 and 2013 by electricity regulators, industry representatives, and other stakeholders in the three physical interconnections within the United States. These broad-based studies were funded by the US Department of Energy and included scenarios of reduced load growth due to EE, DR, and DG. While the studies were independent and used different modeling tools and interconnect-specific assumptions, all provided valuable results and insights. However, some caveats exist. Demand resources were evaluated in conjunction with other factors, and limitations on transmission additions between scenarios made understanding the role of demand resources difficult. One study, the western study, included analyses over both 10- and 20-year planning horizons; the 10-year analysis did not show near-term reductions in transmission, but the 20-year indicated fewer transmission additions, yielding a 36percent capital cost reduction. In the eastern study the reductions in demand largely led to reductions in local generation capacity and an increased opportunity for low-cost and renewable generation to export to other regions. The Texas study evaluated generation changes due to demand, and is in the process of examining demand resource impacts on transmission.

  10. Supply-side and demand-side policies for biosimilars: an overview in 10 European member states

    OpenAIRE

    R?muzat, C?cile; Kapu?niak, Anna; Caban, Aleksandra; Ionescu, Dan; Radi?re, Guerric; Mendoza, Cyril; Toumi, Mondher

    2017-01-01

    ABSTRACT Objective: This study aimed to provide an overview of biosimilar?policies in 10 EU MSs. Methods: Ten EU MS pharmaceutical markets (Belgium, France, Germany, Greece, Hungary, Italy, Poland, Spain, Sweden, and the UK) were selected. A comprehensive literature review?was performed to identify supply-side and demand-side policies in place in the selected countries. Results: Supply-side policies for biosimilars commonly include price linkage, price re-evaluation, and tendering; the use of...

  11. Demand side participation for frequency containment in the web of cells architecture

    NARCIS (Netherlands)

    Syed, M.H.; Burt, G.M.; Kok, J.K.; Hulst, R. d

    2015-01-01

    A large number of demand side management schemes have been proposed in literature for provision of frequency control ancillary services to the network. However, it is assumed that all the flexible devices within the network are managed and controlled under one demand side management (DSM) scheme. In

  12. Assessing the potential of residential HVAC systems for demand-side management

    NARCIS (Netherlands)

    van der Klauw, Thijs; Hoogsteen, Gerwin; Gerards, Marco Egbertus Theodorus; Hurink, Johann L.; Feng, Xianyong; Hebner, Robert E.

    This paper investigates the potential of residential heating, ventilation and air conditioning systems to contribute to dynamic demand-side management. Thermal models for seven houses in Austin, Texas are developed with the goal of using them in a planning based demand-side management methodology.

  13. Predictive Control of Demand Side Units Participating in the Primary Frequency Reserve Market

    DEFF Research Database (Denmark)

    Biegel, Benjamin; Stoustrup, Jakob; Andersen, Palle

    2013-01-01

    We consider an aggregator controlling a mixed portfolio of conventional power generators and demand side units. The generators are controllable within certain power and ramp limitations while the demand side units are characterized by flexible consumptions and therefore can be treated as energy...

  14. Demand side load management using a three step optimization methodology

    NARCIS (Netherlands)

    Bakker, Vincent; Bosman, M.G.C.; Molderink, Albert; Hurink, Johann L.; Smit, Gerardus Johannes Maria

    2010-01-01

    In order to keep a proper functional electricity grid and to prevent large investments in the current grid, the creation, transmission and consumption of electricity needs to be controlled and organized in a different way as done nowadays. Smart meters, distributed generation and -storage and demand

  15. Distributed MPC applied to power demand side control

    NARCIS (Netherlands)

    Larsen, G.K.H.; Pons, J.; Achterop, S.; Scherpen, J.M.A.

    2013-01-01

    In the future, global energy balance of a smart grid system can be achieved by its agents deciding on their own power demand locally and the exchange of these decisions. In this paper, we model a network of households with washing machine programs that can be shifted in time so that the overall

  16. Industrial demand-side management in Canada. In the market for competition

    International Nuclear Information System (INIS)

    Fleming, A.

    1995-01-01

    The requirement for demand-side management brought on by increased competitiveness, a consequence of the deregulation of Canadian electric utilities, was discussed. Options for demand-side management were presented. The effect of deregulation on making demand-side management and energy efficiency high priorities in industry was discussed. Coordinated efforts of Power Smart Inc. and utilities in promoting energy efficiency were claimed to be the key to the success of demand-side management in the electric power industry in Canada. Demand-side management programs were expected to enhance productivity of industry by maximizing the value of plant energy use, and by providing industrial customers with a higher level of customer service

  17. DSM [demand-side management] opportunities in Alberta: An economist's perspective

    International Nuclear Information System (INIS)

    Woodward, R.S.

    1990-01-01

    In Alberta, utility companies are placing increasing attention on demand-side management (DSM) as one option for meeting future demand. Some basic economic principles are provided to yield a guideline on how much a utility should be spending on DSM initiatives. For the case of financial incentives to customers, it is shown that subsidies based on sound economic principles will enable the utility to charge lower overall rates to customers receiving the subsidy without raising other customers' rates. Moving outside of a well-understood market-based system and into a fully centralized planning approach to DSM eliminates a critical link between utilities and their customers. In Alberta, DSM measures appropriate in other regions will not be appropriate due to the province's unique supply and demand characteristics. Most of Alberta's electricity supply comes from low-cost coal-fired plants. On the demand-side, there is a significant concentration of large industrial and commercial consumers, notably in the oil and gas industry, and there is essentially no demand for electric heating in homes since natural gas is very abundant. The Alberta integrated power system currently operates at a load factor of ca 77%, reflecting the large industrial demand and the absence of a winter peaking effect associated with electrical heating requirements. A relatively small difference in embedded and incremental electricity supply costs means that utilities have little to spend on DSM programs. The identification of cost-effective DSM opportunities, most of which are likely to be found in the industrial sector, requires a considerable amount of detailed information on consumer behavior and close collaboration between utility and customer

  18. Austria's Energy Perspectives - It's the Demand Side, Stupid

    International Nuclear Information System (INIS)

    Lechner, H.

    2009-01-01

    During the last decade Austria made remarkable progress in developing renewable energy sources. But at the same time energy demand has steadily increased so that the share of renewables in the energy mix has remained more or less stable over the years. Rising energy demand and import dependence is also forecast in a business-as-usual scenario for the future. If Austria is to fulfill the EU obligatory target to increase the share of renewables up to 34% in 2020 (recently 25%) and to move on a sustainable, low-carbon track it will have to decrease energy consumption or at least stabilise it at the level of 2005. This requires considerable efforts to boost energy efficiency, especially in the building and transport sector.(author).

  19. Evidence is growing on demand side of an oil peak

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-07-15

    After years of continued growth, the number of miles driven by Americans started falling in December 2007. Not only are the number of miles driven falling, but as cars become more fuel efficient, they go further on fewer gallons - further reducing demand for gasoline. This trend is expected to accelerate. Drivers include, along with higher-efficiency cars, mass transit, reversal in urban sprawl, biofuels, and plug-in hybrid vehicles.

  20. Demand-Side Flexibility for Energy Transitions: Ensuring the Competitive Development of Demand Response Options

    OpenAIRE

    Nursimulu, Anjali; Florin, Marie-Valentine; Vuille, François

    2015-01-01

    This report provides an overview of the current debates about demand response development, focusing primarily on Europe, with some comparisons to the United States. ‘Demand response’ includes strategies that involve end-use customers adapting or altering their electricity demand in response to grid conditions or market prices. It is viewed as a multi-purpose power-system resource that enhances the energy system’s capacity to cope with increasing demand, rising costs of conventional transmissi...

  1. Supply-side and demand-side policies for biosimilars: an overview in 10 European member states.

    Science.gov (United States)

    Rémuzat, Cécile; Kapuśniak, Anna; Caban, Aleksandra; Ionescu, Dan; Radière, Guerric; Mendoza, Cyril; Toumi, Mondher

    2017-01-01

    This study aimed to provide an overview of biosimilar policies in 10 EU MSs. Methods : Ten EU MS pharmaceutical markets (Belgium, France, Germany, Greece, Hungary, Italy, Poland, Spain, Sweden, and the UK) were selected. A comprehensive literature review was performed to identify supply-side and demand-side policies in place in the selected countries. Results : Supply-side policies for biosimilars commonly include price linkage, price re-evaluation, and tendering; the use of internal or external reference pricing varies between countries; health technology assessment is conducted in six countries. Regarding demand-side policies, pharmaceutical prescription budgets or quotas and monitoring of prescriptions (with potential financial incentives or penalties) are in place in eight and in seven countries respectively. Switching is generally allowed, but is solely the physician's responsibility. Automatic substitution is not recommended, or even forbidden, in most EU MSs. Prescription conditions or guidelines that apply to biosimilars are established in nearly all surveyed EU MSs. Conclusions : Important heterogeneity in policies on biosimilars was seen between (and even within) selected countries, which may partly explain variations in biosimilar uptake. Supply-side policies targeting price have been reported to limit biosimilar penetration in the long term, despite short-term savings, while demand-side policies are considered to positively impact uptake.

  2. Supply-side and demand-side policies for biosimilars: an overview in 10 European member states

    Science.gov (United States)

    Rémuzat, Cécile; Kapuśniak, Anna; Caban, Aleksandra; Ionescu, Dan; Radière, Guerric; Mendoza, Cyril; Toumi, Mondher

    2017-01-01

    ABSTRACT Objective: This study aimed to provide an overview of biosimilar policies in 10 EU MSs. Methods: Ten EU MS pharmaceutical markets (Belgium, France, Germany, Greece, Hungary, Italy, Poland, Spain, Sweden, and the UK) were selected. A comprehensive literature review was performed to identify supply-side and demand-side policies in place in the selected countries. Results: Supply-side policies for biosimilars commonly include price linkage, price re-evaluation, and tendering; the use of internal or external reference pricing varies between countries; health technology assessment is conducted in six countries. Regarding demand-side policies, pharmaceutical prescription budgets or quotas and monitoring of prescriptions (with potential financial incentives or penalties) are in place in eight and in seven countries respectively. Switching is generally allowed, but is solely the physician’s responsibility. Automatic substitution is not recommended, or even forbidden, in most EU MSs. Prescription conditions or guidelines that apply to biosimilars are established in nearly all surveyed EU MSs. Conclusions: Important heterogeneity in policies on biosimilars was seen between (and even within) selected countries, which may partly explain variations in biosimilar uptake. Supply-side policies targeting price have been reported to limit biosimilar penetration in the long term, despite short-term savings, while demand-side policies are considered to positively impact uptake. PMID:28740617

  3. Demand side resource operation on the Irish power system with high wind power penetration

    International Nuclear Information System (INIS)

    Keane, A.; Tuohy, A.; Meibom, P.; Denny, E.; Flynn, D.; Mullane, A.; O'Malley, M.

    2011-01-01

    The utilisation of demand side resources is set to increase over the coming years with the advent of advanced metering infrastructure, home area networks and the promotion of increased energy efficiency. Demand side resources are proposed as an energy resource that, through aggregation, can form part of the power system plant mix and contribute to the flexible operation of a power system. A model for demand side resources is proposed here that captures its key characteristics for commitment and dispatch calculations. The model is tested on the all island Irish power system, and the operation of the model is simulated over one year in both a stochastic and deterministic mode, to illustrate the impact of wind and load uncertainty. The results illustrate that demand side resources can contribute to the efficient, flexible operation of systems with high penetrations of wind by replacing some of the functions of conventional peaking plant. Demand side resources are also shown to be capable of improving the reliability of the system, with reserve capability identified as a key requirement in this respect. - Highlights: → Demand side resource model presented for use in unit commitment and dispatch calculations. → Benefits of demand side aggregation demonstrated specifically as a peaking unit and provider of reserve. → Potential to displace or defer construction of conventional peaking units.

  4. Research on electricity market operation mechanism and its benefit of demand side participation

    Science.gov (United States)

    Han, Shuai; Yan, Xu; Qin, Li-juan; Lin, Xi-qiao; Zeng, Bo

    2017-08-01

    Demand response plays an important role in maintaining the economic stability of the system, and has the characteristics of high efficiency, low cost, fast response, good environmental benefits and so on. Demand side resource is an important part of electricity market. The research of demand side resources in our country is still in the initial stage, but the opening of the electricity sales side provides a broad prospect for the development of electricity market. This paper summarizes the main types of demand side resources in our country, analyzes the economic principle of demand response from the micro perspective, puts forward some suggestions on the operation mechanism of China’s demand side resources participating in the electricity market under the condition of electricity sales side opening, analyzes the current situation of pricing in the electricity wholesale market and sets up the pricing strategy of the centralized wholesale market with the demand side power supply participating in quotation, which makes the social and economic benefits reach the maximum.

  5. THE TECHNOLOGY ASSESSMENT OF DEMAND SIDE BIDDING IN THE SOUTH AFRICAN CONTEXT*

    Directory of Open Access Journals (Sweden)

    H.K. Grover

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT:South Africa is currently in the grip of a severe power supply capacity constraint. January 2007 saw blackouts throughout the country, and worse was expected in the months to come. As a measure of immediate remedy Eskom has turned to demand side bidding (DSB, a methodology whereby the demand side has an opportunity to sell back flexible load to the supply side. This paper assesses DSB with the aim of evaluating and gauging the current and potential future standing of DSB as a technology product within the South African context.

    AFRIKAANSE OPSOMMING: Suid-Afrika ervaar tans ’n ernstige vraagstuk in elektrisiteitsvoorsiening. Vanaf Januarie 2007 kom gereelde kragonderbrekings voor, en volgens alle aanduidings lê die ergste nog voor. As ’n korttermynmaatreël beoog ESKOM ’n strategie van aanvraagbestuur en spesifiek aanvraag-bie, ’n metodologie waarvolgens verbruikers die geleentheid kry om elektrisiteit aan die verskaffer terug te verkoop. Hierdie artikel assesseer die metodologie ten einde die huidige en toekomstige gebruikersmoontlikhede daarvan as ’n tegnologieproduk binne Suid-Afrikaanse konteks te bepaal.

  6. Directed graph based carbon flow tracing for demand side carbon obligation allocation

    DEFF Research Database (Denmark)

    Sun, Tao; Feng, Donghan; Ding, Teng

    2016-01-01

    In order to achieve carbon emission abatement, some researchers and policy makers have cast their focus on demand side carbon abatement potentials. This paper addresses the problem of carbon flow calculation in power systems and carbon obligation allocation at demand side. A directed graph based...... method for tracing carbon flow is proposed. In a lossy network, matrices such as carbon losses, net carbon intensity (NCI) and footprint carbon intensity (FCI) are obtained with the proposed method and used to allocate carbon obligation at demand side. Case studies based on realistic distribution...... and transmission systems are provided to demonstrate the effectiveness of the proposed method....

  7. Increased demand-side flexibility: market effects and impacts on variable renewable energy integration

    Directory of Open Access Journals (Sweden)

    Åsa Grytli Tveten

    2016-12-01

    Full Text Available This paper investigates the effect of increased demand-side flexibility (DSF on integration and market value of variable renewable energy sources (VRE. Using assumed potentials, system-optimal within-day shifts in demand are investigated for the Northern European power markets in 2030, applying a comprehensive partial equilibrium model with high temporal and spatial resolution. Increased DSF is found to cause only a minor (less than 3% reduction in consumers’ cost of electricity. VRE revenues are found to increase (up to 5% and 2% for wind and solar power, respectively, and total VRE curtailment decreases by up to 7.2 TWh. Increased DSF causes only limited reductions in GHG emissions. The emission reduction is, however, sensitive to underlying assumptions. We conclude that increased DSF is a promising measure for improving VRE integration. However, low consumers’ savings imply that policies stimulating DFS will be needed to fully use the potential benefits of DSF for VRE integration

  8. Demand side management in recycling and electricity retail pricing

    Science.gov (United States)

    Kazan, Osman

    This dissertation addresses several problems from the recycling industry and electricity retail market. The first paper addresses a real-life scheduling problem faced by a national industrial recycling company. Based on their practices, a scheduling problem is defined, modeled, analyzed, and a solution is approximated efficiently. The recommended application is tested on the real-life data and randomly generated data. The scheduling improvements and the financial benefits are presented. The second problem is from electricity retail market. There are well-known patterns in daily usage in hours. These patterns change in shape and magnitude by seasons and days of the week. Generation costs are multiple times higher during the peak hours of the day. Yet most consumers purchase electricity at flat rates. This work explores analytic pricing tools to reduce peak load electricity demand for retailers. For that purpose, a nonlinear model that determines optimal hourly prices is established based on two major components: unit generation costs and consumers' utility. Both are analyzed and estimated empirically in the third paper. A pricing model is introduced to maximize the electric retailer's profit. As a result, a closed-form expression for the optimal price vector is obtained. Possible scenarios are evaluated for consumers' utility distribution. For the general case, we provide a numerical solution methodology to obtain the optimal pricing scheme. The models recommended are tested under various scenarios that consider consumer segmentation and multiple pricing policies. The recommended model reduces the peak load significantly in most cases. Several utility companies offer hourly pricing to their customers. They determine prices using historical data of unit electricity cost over time. In this dissertation we develop a nonlinear model that determines optimal hourly prices with parameter estimation. The last paper includes a regression analysis of the unit generation cost

  9. Winning end users active support to demand side response

    Energy Technology Data Exchange (ETDEWEB)

    Osorio, Jose [Rede Electrica Nacional, S.A., Lisbon (Portugal); Estanqueiro, Ana [Laboratorio Nacional de Energia e Geologia (LNEG), Lisbon (Portugal)

    2012-07-01

    While objectives proposed for Smart Grids and Smart metering may seem to be able to win easily end user's supports, a considerable amount of studies on social behavior concerning energy efficiency and sustainability show the gap between the values people would like to fulfill and their real life performance. As TSOs envision here a source of System Ancillary Services, measures to make the source really dependable, so that an adequate market design may really work are pointed out. (orig.)

  10. Hawaii demand-side management resource assessment. Final report, Reference Volume 1: Building prototype analysis

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-04-01

    This report provides a detailed description of, and the baseline assumptions and simulation results for, the building prototype simulations conducted for the building types designated in the Work Plan for Demand-side Management Assessment of Hawaii`s Demand-Side Resources (HES-4, Phase 2). This report represents the second revision to the initial building prototype description report provided to DBEDT early in the project. Modifications and revisions to the prototypes, based on further calibration efforts and on comments received from DBEDT Staff have been incorporated into this final version. These baseline prototypes form the basis upon which the DSM measure impact estimates and the DSM measure data base were developed for this project. This report presents detailed information for each of the 17 different building prototypes developed for use with the DOE-21E program (23 buildings in total, including resorts and hotels defined separately for each island) to estimate the impact of the building technologies and measures included in this project. The remainder of this section presents some nomenclature and terminology utilized in the reports, tables, and data bases developed from this project to denote building type and vintage. Section 2 contains a more detailed discussion of the data sources, the definition of the residential sector building prototypes, and results of the DOE-2 analysis. Section 3 provides a similar discussion for the commercial sector. The prototype and baseline simulation results are presented in a separate section for each building type. Where possible, comparison of the baseline simulation results with benchmark data from the ENERGY 2020 model or other demand forecasting models specific to Hawaii is included for each building. Appendix A contains a detailed listing of the commercial sector baseline indoor lighting technologies included in the existing and new prototypes by building type.

  11. Experimental determination of demand side management potential of wet appliances in the Netherlands

    NARCIS (Netherlands)

    Staats, M. R.; de Boer-Meulman, P. D M; van Sark, W. G J H M

    2017-01-01

    The potential of demand side management (DSM) of wet appliances (washing machine, dishwasher and tumble dryer) in households with photovoltaic (PV) systems is studied experimentally focusing on evening peak demand reduction and increase in PV self-consumption. In a sample of 100 Dutch households the

  12. Hawaii demand-side management resource assessment. Final report: DSM opportunity report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-08-01

    The Hawaii Demand-Side Management Resource Assessment was the fourth of seven projects in the Hawaii Energy Strategy (HES) program. HES was designed by the Department of Business, Economic Development, and Tourism (DBEDT) to produce an integrated energy strategy for the State of Hawaii. The purpose of Project 4 was to develop a comprehensive assessment of Hawaii`s demand-side management (DSM) resources. To meet this objective, the project was divided into two phases. The first phase included development of a DSM technology database and the identification of Hawaii commercial building characteristics through on-site audits. These Phase 1 products were then used in Phase 2 to identify expected energy impacts from DSM measures in typical residential and commercial buildings in Hawaii. The building energy simulation model DOE-2.1E was utilized to identify the DSM energy impacts. More detailed information on the typical buildings and the DOE-2.1E modeling effort is available in Reference Volume 1, ``Building Prototype Analysis``. In addition to the DOE-2.1E analysis, estimates of residential and commercial sector gas and electric DSM potential for the four counties of Honolulu, Hawaii, Maui, and Kauai through 2014 were forecasted by the new DBEDT DSM Assessment Model. Results from DBEDTs energy forecasting model, ENERGY 2020, were linked with results from DOE-2.1E building energy simulation runs and estimates of DSM measure impacts, costs, lifetime, and anticipated market penetration rates in the DBEDT DSM Model. Through its algorithms, estimates of DSM potential for each forecast year were developed. Using the load shape information from the DOE-2.1E simulation runs, estimates of electric peak demand impacts were developed. 10 figs., 55 tabs.

  13. Impact of Demand Side Response on a Commercial Retail Refrigeration System

    Directory of Open Access Journals (Sweden)

    Ibrahim M. Saleh

    2018-02-01

    Full Text Available The UK National Grid has placed increased emphasis on the development of Demand Side Response (DSR tariff mechanisms to manage load at peak times. Refrigeration systems, along with HVAC, are estimated to consume 14% of the UK’s electricity and could have a significant role for DSR application. However, characterized by relatively low individual electrical loads and massive asset numbers, multiple low power refrigerators need aggregation for inclusion in these tariffs. In this paper, the impact of the Demand Side Response (DSR control mechanisms on food retailing refrigeration systems is investigated. The experiments are conducted in a test-rig built to resemble a typical small supermarket store. The paper demonstrates how the temperature and pressure profiles of the system, the active power and the drawn current of the compressors are affected following a rapid shut down and subsequent return to normal operation as a response to a DSR event. Moreover, risks and challenges associated with primary and secondary Firm Frequency Response (FFR mechanisms, where the load is rapidly shed at high speed in response to changes in grid frequency, is considered. For instance, measurements are included that show a significant increase in peak inrush currents of approx. 30% when the system returns to normal operation at the end of a DSR event. Consideration of how high inrush currents after a DSR event can produce voltage fluctuations of the supply and we assess risks to the local power supply system.

  14. New Real-Time Market Facilitating Demand-Side Resources for System Balancing

    DEFF Research Database (Denmark)

    Feng, Donghan; Nyeng, Preben; Xie, Jun

    2011-01-01

    Many demand side resources have the potential to provide fast and low cost balancing services. Switching these devices on and off can be executed in seconds and have limited consequences for the customers if the duration is not long. With carefully designed market rules, tens of thousands...... the participation of demand-side resources. In light of the future environment of increasing intermittent renewable power and distributed energy/storage resources, stochastic time-series and Monte-Carlo simulation are used to analyze the relationship between balancing requirement and generation/demand uncertainties...

  15. The Demand Side in Economic Models of Energy Markets: The Challenge of Representing Consumer Behavior

    International Nuclear Information System (INIS)

    Krysiak, Frank C.; Weigt, Hannes

    2015-01-01

    Energy models play an increasing role in the ongoing energy transition processes either as tools for forecasting potential developments or for assessments of policy and market design options. In recent years, these models have increased in scope and scale and provide a reasonable representation of the energy supply side, technological aspects and general macroeconomic interactions. However, the representation of the demand side and consumer behavior has remained rather simplistic. The objective of this paper is twofold. First, we review existing large-scale energy model approaches, namely bottom-up and top-down models, with respect to their demand-side representation. Second, we identify gaps in existing approaches and draft potential pathways to account for a more detailed demand-side and behavior representation in energy modeling.

  16. The Demand Side in Economic Models of Energy Markets: The Challenge of Representing Consumer Behavior

    Energy Technology Data Exchange (ETDEWEB)

    Krysiak, Frank C., E-mail: frank.krysiak@unibas.ch; Weigt, Hannes [Department of Business and Economics, University of Basel, Basel (Switzerland)

    2015-05-19

    Energy models play an increasing role in the ongoing energy transition processes either as tools for forecasting potential developments or for assessments of policy and market design options. In recent years, these models have increased in scope and scale and provide a reasonable representation of the energy supply side, technological aspects and general macroeconomic interactions. However, the representation of the demand side and consumer behavior has remained rather simplistic. The objective of this paper is twofold. First, we review existing large-scale energy model approaches, namely bottom-up and top-down models, with respect to their demand-side representation. Second, we identify gaps in existing approaches and draft potential pathways to account for a more detailed demand-side and behavior representation in energy modeling.

  17. The Demand Side in Economic Models of Energy Markets: The Challenge of Representing Consumer Behavior

    Directory of Open Access Journals (Sweden)

    Frank eKrysiak

    2015-05-01

    Full Text Available Energy models play an increasing role in the ongoing energy transition processes either as tools for forecasting potential developments or for assessments of policy and market design options. In recent years these models have increased in scope and scale and provide a reasonable representation of the energy supply side, technological aspects and general macroeconomic interactions. However, the representation of the demand side and consumer behavior has remained rather simplistic. The objective of this paper is twofold. First, we review existing large scale energy model approaches, namely bottom-up and top-down models, with respect to their demand side representation. Second, we identify gaps in existing approaches and draft potential pathways to account for a more detailed demand side and behavior representation in energy modeling.

  18. Co-optimization of Energy and Demand-Side Reserves in Day-Ahead Electricity Markets

    Science.gov (United States)

    Surender Reddy, S.; Abhyankar, A. R.; Bijwe, P. R.

    2015-04-01

    This paper presents a new multi-objective day-ahead market clearing (DAMC) mechanism with demand-side reserves/demand response (DR) offers, considering realistic voltage-dependent load modeling. The paper proposes objectives such as social welfare maximization (SWM) including demand-side reserves, and load served error (LSE) minimization. In this paper, energy and demand-side reserves are cleared simultaneously through co-optimization process. The paper clearly brings out the unsuitability of conventional SWM for DAMC in the presence of voltage-dependent loads, due to reduction of load served (LS). Under such circumstances multi-objective DAMC with DR offers is essential. Multi-objective Strength Pareto Evolutionary Algorithm 2+ (SPEA 2+) has been used to solve the optimization problem. The effectiveness of the proposed scheme is confirmed with results obtained from IEEE 30 bus system.

  19. Neural network controller for Active Demand-Side Management with PV energy in the residential sector

    International Nuclear Information System (INIS)

    Matallanas, E.; Castillo-Cagigal, M.; Gutiérrez, A.; Monasterio-Huelin, F.; Caamaño-Martín, E.; Masa, D.; Jiménez-Leube, J.

    2012-01-01

    Highlights: ► We have developed a neural controller for Active Demand-Side Management. ► The controller consists of Multilayer Perceptrons evolved with a genetic algorithm. ► The architecture of the controller is distributed and modular. ► The simulations show that the electrical local behavior improves. ► Active Demand-Side Management helps users to control his energy behaviour. -- Abstract: In this paper, we describe the development of a control system for Demand-Side Management in the residential sector with Distributed Generation. The electrical system under study incorporates local PV energy generation, an electricity storage system, connection to the grid and a home automation system. The distributed control system is composed of two modules: a scheduler and a coordinator, both implemented with neural networks. The control system enhances the local energy performance, scheduling the tasks demanded by the user and maximizing the use of local generation.

  20. The electric energy demand-side planning: necessity and possibilities of execution

    International Nuclear Information System (INIS)

    Sposito, E.S.

    1991-05-01

    Aiming at reducing the level of investments, is presented a demand-side planning approach, divided into two parts. The first part is an analysis on the actual need of our demand-side approaching. In view of this, is showed a set of data and comments both on economic and technological aspects concerning the electric network and sector, as well as evaluation of the social, ecological and financial aspects which could act against the full expansion of the electric system. In the second part, a demand-side planning methodology is introduced, as well as its main concepts, its variables and its instruments of affecting the demand: energy conservation, replacement of sources, reduction of losses and electric power decentralized generation. Each of them is fully detailed in a set of planning policies and actions. Concluding is presented the basic elements of a National Electric Energy Substitution and Conservation Plan - PLANSCON. (author)

  1. Developing a demand side management strategic framework through a collaborative [process

    International Nuclear Information System (INIS)

    Kostler, J.

    1992-01-01

    Alberta Power Ltd. is developing a demand side management (DSM) strategic framework through a collaborative process that began in September 1991. The process is seen to have the advantages of involving customers in DSM issues, giving them the opportunity to determine the outcome, being less confrontational, and having the capability of arriving at solutions unattainable through other processes. Issues being considered in the collaborative process include cost effectiveness, externalities, screening and analyzing of DSM measures, cost allocation and recovery, DSM lost revenues, the utility role in DSM, measurement criteria, and incentives. The process includes day-long meetings of a 12-member collaborative group comprising representatives from Alberta Power, government agencies, industry and municipal associations, and environmental and consumer organizations. A professional facilitator and an expert consultant from outside Alberta Power were employed to support the collaborative process. The process is working well and is on track to present the utility with a strategic framework to deal with DSM

  2. On the importance of the supply side in demand-side management

    International Nuclear Information System (INIS)

    Fischer, Carolyn

    2005-01-01

    We discuss how the structure of market supply affects the evaluation of policies to promote energy efficiency in household appliances. If competitive markets offer the levels that consumers demand, product standards inefficiently restrict choice. If suppliers price discriminate, minimum standards can restrict the inefficient use of energy intensity to segment consumers. We also compare the effects of average intensity standards, energy prices and innovation, and consider what the different behavioral predictions imply for empirical studies of energy efficiency. Good policymaking requires knowing not only how consumers value energy efficiency in their decision-making, but also how producers respond to those values

  3. On the importance of the supply side in demand-side management

    International Nuclear Information System (INIS)

    Fischer, C.

    2005-01-01

    We discuss how the structure of market supply affects the evaluation of policies to promote energy efficiency in household appliances. If competitive markets offer the levels that consumers demand, product standards inefficiently restrict choice. If suppliers price discriminate, minimum standards can restrict the inefficient use of energy intensity to segment consumers. We also compare the effects of average intensity standards, energy prices and innovation, and consider what the different behavioral predictions imply for empirical studies of energy efficiency. Good policy making requires knowing not only how consumers value energy efficiency in their decision-making, but also how producers respond to those values. (author)

  4. Measurement of biological oxygen demand sandy beaches

    African Journals Online (AJOL)

    Measurements of biological oxygen demand in a sandy beach using conventional .... counting the cells present in a sample of aged seawater and comparing this with .... This activity peaked at 71 % above the undisturbed level after 16 hours.

  5. THE DILEMMA OF DEMAND SIDE POLICIES VERSUS SUPPLY SIDE POLICIES FOR RELAUNCHING CAPITALIST ECONOMIES

    Directory of Open Access Journals (Sweden)

    PETRE PRISECARU

    2014-11-01

    Full Text Available The first important economic recession in this century started in USA with the burst of real estate bubble followed by the bankruptcy of some investment and commercial banks and the collapse of capital market. The financial-banking crisis spilt over the world economy and caused the second deepest economic recession in the last 80 years. The financial crisis has badly affected almost all market economies and was the result of a combination between market failures and mistakes made in macroeconomic policies. In the financial sector there was not enough regulation and supervision of corporate governance while in goods industry the pressure of over-regulation led to higher factor costs and supply contraction. The direct result of supply side policies and particularly of monetarist instruments is seen now clearly in the USA: large deficits, huge debts, reduced savings, heavy dependence on foreign money (capital and resources, relatively low domestic output and supply.

  6. Optimal energy efficiency policies and regulatory demand-side management tests: How well do they match?

    International Nuclear Information System (INIS)

    Brennan, Timothy J.

    2010-01-01

    Under conventional models, subsidizing energy efficiency requires electricity to be priced below marginal cost. Its benefits increase when electricity prices increase to finance the subsidy. With high prices, subsidies are counterproductive unless consumers fail to make efficiency investments when private benefits exceed costs. If the gain from adopting efficiency is only reduced electricity spending, capping revenues from energy sales may induce a utility to substitute efficiency for generation when the former is less costly. This goes beyond standard 'decoupling' of distribution revenues from sales, requiring complex energy price regulation. The models' results are used to evaluate tests in the 2002 California Standard Practice Manual for assessing demand-side management programs. Its 'Ratepayer Impact Measure' test best conforms to the condition that electricity price is too low. Its 'Total Resource Cost' and 'Societal Cost' tests resemble the condition for expanded decoupling. No test incorporates optimality conditions apart from consumer choice failure.

  7. Power System Transient Stability Improvement Using Demand Side Management in Competitive Electricity Markets

    DEFF Research Database (Denmark)

    Hu, Weihao; Wang, Chunqi; Chen, Zhe

    2012-01-01

    Since the hourly spot market price is available one day ahead in Denmark, the price could be transferred to the consumers and they may shift some of their loads from high price periods to the low price periods in order to save their energy costs. The optimal load response to an electricity price...... for demand side management generates different load profiles and may provide an opportunity to improve the transient stability of power systems with high wind power penetrations. In this paper, the idea of the power system transient stability improvement by using optimal load response to the electricity...... price is proposed. A 102-bus power system which represents a simplified model of the western Danish power system is chosen as the study case. Simulation results show that the optimal load response to electricity prices is an effective measure to improve the power system transient stability with high...

  8. Demand-side mitigation options of the agricultural sector: potential, barriers and ways forward

    Directory of Open Access Journals (Sweden)

    Brunelle Thierry

    2017-01-01

    Full Text Available This paper reviews the potential and barriers of demand-side mitigation options in the agricultural sector based on the recent academic literature and on a survey conducted on a sample of 788 respondents living in France. The mitigation potential of such measures as reducing losses in the food supply chain and shifting diets toward less animal products is estimated to be particularly high, higher, in particular, than supply-side mitigation options. However, to ensure that these measures do not entail a reduction in protein intake, these estimations should consider both caloric and protein units, and take into account the digestibility differentials between protein sources. Our survey shows that people are relatively reluctant to eat more sustainably, preferring to reduce their emissions in other areas such as housing or equipment. This relative reluctance is mainly due to individual perceptions linked to health concerns, taste or habits. Some obstacles could easily be overcome through well-designed policies aiming to, for example, advertise a lower consumption of red meat for health benefits. National governments are, however, rather inactive on this topic, leaving the initiative to the civil society.

  9. The future of the photovoltaic market (demand side/supply side)

    International Nuclear Information System (INIS)

    Zahedi, A.

    1998-01-01

    At present the main PV application market sectors are communications, leisure, boating, solar home systems, and water pumping. It is predicted that in the future, the largest photovoltaic market segments will be solar home photovoltaic systems, grid-connected small-scale photovoltaic systems, grid-connected medium-to-large scale photovoltaic systems, the communications sector and in the electrification of remote and isolated areas. The main factors favoring photovoltaic technology in remote and isolated areas result from: the high costs of conventional energy sources in remote locations; the loss of a scale-economy effect, which means specific costs of small photovoltaic systems are not much higher than those of larger photovoltaic systems; price of fuel, fuel transportation and spare part supplies. The major factors inhibiting the photovoltaic technology include high initial costs, lack of skilled man power, lack of good quality data and social acceptance. A roof top mounted photovoltaic system is one type of PV system which has attracted lots of interest among the people of north America and Europe. The generation of electricity by this system is attractive because: generation is on-site. This results in reduction of transmission costs and transmission losses; the cost of roofing tiles can be eliminated by using mounted PV systems instead; there is no need for additional land for power generation; visual impacts are limited. The objective of this paper is to review the development of the photovoltaic market in the recent 10 year period and discuss the future markets for this technology with respect to supply and demand

  10. Demand side resource operation on the Irish power system with high wind power penetration

    DEFF Research Database (Denmark)

    Keane, A.; Tuohy, A.; Meibom, Peter

    2011-01-01

    part of the power system plant mix and contribute to the flexible operation of a power system. A model for demand side resources is proposed here that captures its key characteristics for commitment and dispatch calculations. The model is tested on the all island Irish power system, and the operation...... of the functions of conventional peaking plant. Demand side resources are also shown to be capable of improving the reliability of the system, with reserve capability identified as a key requirement in this respect....... of the model is simulated over one year in both a stochastic and deterministic mode, to illustrate the impact of wind and load uncertainty. The results illustrate that demand side resources can contribute to the efficient, flexible operation of systems with high penetrations of wind by replacing some...

  11. Bulk electric system reliability evaluation incorporating wind power and demand side management

    Science.gov (United States)

    Huang, Dange

    correlations and the interactive effects of wind power and load forecast uncertainty on system reliability are examined. The concept of the security cost associated with operating in the marginal state in the well-being framework is incorporated in the economic analyses associated with system expansion planning including wind power and load forecast uncertainty. Overall reliability cost/worth analyses including security cost concepts are applied to select an optimal wind power injection strategy in a bulk electric system. The effects of the various demand side management measures on system reliability are illustrated using the system, load point, and well-being indices, and the reliability index probability distributions. The reliability effects of demand side management procedures in a bulk electric system including wind power and load forecast uncertainty considerations are also investigated. The system reliability effects due to specific demand side management programs are quantified and examined in terms of their reliability benefits.

  12. Supply- and demand-side effects of power sector planning with demand-side management options and SO2 emission constraints

    International Nuclear Information System (INIS)

    Shrestha, R.M.; Marpaung, C.O.P.

    2005-01-01

    This paper examines the implications of SO 2 emission mitigation constraints in the power sector planning in Indonesia--a developing country--during 2003-2017 from a long term integrated resource planning perspective. A decomposition model is developed to assess the contributions of supply- and demand-side effects to the total changes in CO 2 , SO 2 and NO x emissions from the power sector due to constraints on SO 2 emissions. The results of the study show that both the supply- and demand-side effects would act towards the reduction of CO 2 , SO 2 and NO x emissions. However, the supply-side effect would play the dominant role in emission mitigations from the power sector in Indonesia. The average incremental SO 2 abatement cost would increase from US$ 970 to US$ 1271 per ton of SO 2 , while electricity price would increase by 2-18% if the annual SO 2 emission reduction target is increased from 10% to 25%

  13. Side abutment pressure distribution by field measurement

    Energy Technology Data Exchange (ETDEWEB)

    Lian-guo Wang; Yang Song; Xing-hua He; Jian Zhang [State Key Laboratory for Geomechanics and Deep Underground Engineering, Xuzhou (China)

    2008-12-15

    Given the 7123 working face in the Qidong Coal Mine of the Wanbei Mining Group, nine dynamic roof monitors were installed in the crossheading to measure the amount and velocity of roof convergence in different positions and at different times and three steel bored stress sensors were installed in the return airway to measure rock stress at depth. On the basis of this arrangement, the rule of change of the distribution of the side abutment pressure with the advance of the working face and movement of overlying strata was studied. The rule of change and the stability of rock stress at depth were measured. Secondly, the affected area and stability time of the side abutment pressure were also studied. The results show that: 1) During working, the face advanced distance was from 157 m to 99 m, the process was not effected by mining induced pressure. When the distance was 82 m, the position of peak stress was 5 m away from the coal wall. When the distance was 37 m, the position of peak stress away from the coal wall was about 15 m to 20 m and finally reached a steady state; 2) the time and the range of the peak of side rock pressure obtained from stress sensors were consistent with the results from the dynamic roof monitors; 3) the position of the peak pressure was 25 m away from the coal wall. 14 refs., 6 figs.

  14. Demand side management scheme in smart grid with cloud computing approach using stochastic dynamic programming

    Directory of Open Access Journals (Sweden)

    S. Sofana Reka

    2016-09-01

    Full Text Available This paper proposes a cloud computing framework in smart grid environment by creating small integrated energy hub supporting real time computing for handling huge storage of data. A stochastic programming approach model is developed with cloud computing scheme for effective demand side management (DSM in smart grid. Simulation results are obtained using GUI interface and Gurobi optimizer in Matlab in order to reduce the electricity demand by creating energy networks in a smart hub approach.

  15. The impact of demand side management strategies in the penetration of renewable electricity

    International Nuclear Information System (INIS)

    Pina, André; Silva, Carlos; Ferrão, Paulo

    2012-01-01

    High fuel costs, increasing energy security and concerns with reducing emissions have pushed governments to invest in the use of renewable energies for electricity generation. However, the intermittence of most renewable resources when renewable energy provides a significant share of the energy mix can create problems to electricity grids, which can be minimized by energy storage systems that are usually not available or expensive. An alternative solution consists on the use of demand side management strategies, which can have the double effect of reducing electricity consumption and allowing greater efficiency and flexibility in the grid management, namely by enabling a better match between supply and demand. This work analyzes the impact of demand side management strategies in the evolution of the electricity mix of Flores Island in the Azores archipelago which is characterized by high shares of renewable energy and therefore the introduction of more renewable energy sources makes it an interesting case study for testing innovative solutions. The electricity generation system is modeled in TIMES, a software which optimizes the investment and operation of wind and hydro plants until 2020 based on scenarios for demand growth, deployment of demand response technologies in the domestic sector and promotion of behavioral changes to eliminate standby power. The results show that demand side management strategies can lead to a significant delay in the investment on new generation capacity from renewable resources and improve the operation of the existing installed capacity. -- Highlights: ► Energy efficiency can help reduce the need for investment in more renewable energy. ► Dynamic demand helps increase the use of renewable energy in low demand periods. ► Around 40% of total consumption by domestic appliances is used as dynamic demand. ► The load of domestic appliances is mainly shifted to the 5:00 to 9:00 period.

  16. Demand side management program evaluation based on industrial and commercial field data

    International Nuclear Information System (INIS)

    Eissa, M.M.

    2011-01-01

    Demand Response is increasingly viewed as an important tool for use by the electric utility industry in meeting the growing demand for electricity. There are two basic categories of demand response options: time varying retail tariffs and incentive Demand Response Programs. is applying the time varying retail tariffs program, which is not suitable according to the studied load curves captured from the industrial and commercial sectors. Different statistical studies on daily load curves for consumers connected to 22 kV lines are classified. The load curve criteria used for classification is based on peak ratio and night ratio. The data considered here is a set of 120 annual load curves corresponding to the electric power consumption (the western area in the King Saudi Arabia (KSA)) of many clients in winter and some months in the summer (peak period). The study is based on real data from several Saudi customer sectors in many geographical areas with larger commercial and industrial customers. The study proved that the suitable Demand Response for the ESC is the incentive program. - Highlights: → Study helps in selecting the proper demand side program. → A credit will be given for the customers during summer months. → Reduction in the electric bill. → Monthly bill credit is decreased based on customers' peak load reduction. → Guide for applying the proper demand side program suitable for the utility and customers.

  17. Smart grid dispatch strategy for on/off demand-side devices

    DEFF Research Database (Denmark)

    Biegel, Benjamin; Andersen, Palle; Pedersen, Tom S.

    2013-01-01

    We consider an aggregator managing a portfolio of runtime and downtime constrained ON/OFF demand-side devices. The devices are able to shift consumption in time within certain energy limitations. We show how the aggregator can manage the portfolio of devices to collectively provide upward...

  18. Impact of realistic communications for fast-acting demand side management

    DEFF Research Database (Denmark)

    Dambrauskas, Paulius; Syed, Mazheruddin H.; Blair, Steven M.

    2017-01-01

    The rising penetration of intermittent energy resources is increasing the need for more diverse electrical energy resources that are able to support ancillary services. Demand side management (DSM) has a significant potential to fulfil this role, but several challenges are still impeding the wide...

  19. Ensuring the security of electricity supply in Ontario: is demand-side management the answer?

    International Nuclear Information System (INIS)

    Chuddy, B.

    2004-01-01

    This paper examines the issues relating to ensuring the security of electricity supply in Ontario. In particular, it focuses on demand-side management as a means of achieving these objectives. The solution involves both conservation and supply. It is therefore critical that there be investment in new supply with multiple buyers/sellers. regulatory environment and pricing could encourage conservation

  20. Generation of flexible domestic load profiles to evaluate demand side management approaches

    NARCIS (Netherlands)

    Hoogsteen, Gerwin; Molderink, Albert; Hurink, Johann L.; Smit, Gerardus Johannes Maria

    2016-01-01

    Various Demand Side Management (DSM) approaches have been developed the last couple of years to avoid costly grid upgrades. However, evaluation of these DSM methodologies is usually restricted to a use-case specific example, making comparison between different DSM approaches hard. This paper

  1. Controlling market power and price spikes in electricity networks: Demand-side bidding.

    Science.gov (United States)

    Rassenti, Stephen J; Smith, Vernon L; Wilson, Bart J

    2003-03-04

    In this article we report an experiment that examines how demand-side bidding can discipline generators in a market for electric power. First we develop a treatment without demand-side bidding; two large firms are allocated baseload and intermediate cost generators such that either firm might unilaterally withhold the capacity of its intermediate cost generators from the market to benefit from the supracompetitive prices that would result from only selling its baseload units. In a converse treatment, ownership of some of the intermediate cost generators is transferred from each of these firms to two other firms such that no one firm could unilaterally restrict output to spawn supracompetitive prices. Having established a well controlled data set with price spikes paralleling those observed in the naturally occurring economy, we also extend the design to include demand-side bidding. We find that demand-side bidding completely neutralizes the exercise of market power and eliminates price spikes even in the presence of structural market power.

  2. The demand-side innovation policies in the context of small EU member country. Nõudluspoolsed innovatsioonipoliitikad Euroopa Liidu väikese liikmesriigi kontekstis

    Directory of Open Access Journals (Sweden)

    Tõnu Roolaht

    2013-01-01

    Full Text Available Demand-side innovation policies, in the form of regulations, public procurement, subsidies for private demand, and other measures, are often viewed as valuable additions to more traditional supply-side policies. The demand-side innovation policies should enable to facilitate the emergence of vital and sustainable links between innovation outputs and various markets. However, without sufficient institutional framework and policy experiences such measures could also contribute to new market distortions or crowding-out effects, which do not facilitate sustainable growth in innovations. The charting of possible risks of such policies should help to outline the criteria for aiming at sustainable effects. The purpose of this contribution is to offer suggestions about preconditions and policy characteristics, which should help to avoid the misuse of demand-side measures and facilitate the sustainability of desired changes in society. It is predominantly conceptual contribution but draws also extensively on case evidence about the effects of relevant policies and their discontinuation

  3. Linking meters and markets: Roles and incentives to support a flexible demand side

    DEFF Research Database (Denmark)

    Katz, Jonas

    2014-01-01

    wholesale market participants to the demand side is mostly infeasible, resulting in flexibility tasks being aggregated and delegated to balancing responsible wholesale traders. This analysis focuses on whether current incentives and roles are appropriate and where the design could be improved to establish......Present trends in the development of electricity systems are expected to generate a growing need for flexibility in decentralised resources, including demand response. In order to enable decentralised actors to create value, the organisation of markets and incentives should incorporate these new...... a flexible demand side with a particular focus on the Danish case. Design-related barriers are identified that affect expected value, associated risks, and the distribution of responsibilities. This serves as a basis to define policy options in the context of Nordic electricity markets. © 2014 Elsevier Ltd...

  4. A Midwest utility's perspective of DSM [demand-side management]: Balancing the needs of customers, shareholders and the environment

    International Nuclear Information System (INIS)

    Collins, G.F.

    1990-01-01

    PSI Energy, a predominately coal-burning Indiana electric utility, is very concerned about the environment and is using demand-side management (DSM) as part of a strategy to balance the sometimes conflicting interests of the environment, the economy, customers and shareholders. Faced with slow growth within its service territory, an abundance of low-cost, high sulfur coal burning baseload capacity, massive future expenditures for acid rain mitigation and a weakened financial state due to a cancelled nuclear project, PSI Energy has taken a novel approach to preserving value for customers, shareholders, the economy and environment. To accomodate Indiana's goal of least cost utility planning, PSI initiated an all-source bidding program in which it solicited bids for peaking capacity or the equivalent. Four parallel but separate solicitations were pursued: combustion turbine manufacturers for PSI owned and operated capacity, other utilities and non-utility generators for purchased power and third parties for demand-side management. PSI's philosophy with respect to bidding can be expressed as: simplicity, flexibility, creativity, partnerships, expeditious and fairness. There is a minimum bid of 5 MW of summer peak demand reduction, and the minimum contract length is 10 years. The entire 550 MW capacity block available to be filled in the program is open to demand-side resources. The ten major evaluation criteria involved in the program are: price, sponsor qualifications, operational impact, marketing plan, technology, financing plan, verification and measurement, form of security, project management plan, and project cost estimates

  5. Measuring inaccuracy in travel demand forecasting

    DEFF Research Database (Denmark)

    Flyvbjerg, Bent

    2005-01-01

    as the basis for measurement. This paper presents the case against both objections. First, if one is interested in learning whether decisions about building transport infrastructure are based on reliable information, then it is exactly the traffic forecasted at the time of making the decision to build......Project promoters, forecasters, and managers sometimes object to two things in measuring inaccuracy in travel demand forecasting: (1)using the forecast made at the time of making the decision to build as the basis for measuring inaccuracy and (2)using traffic during the first year of operations...... that is of interest. Second, although ideally studies should take into account so-called demand ??ramp up?? over a period of years, the empirical evidence and practical considerations do not support this ideal requirement, at least not for large- N studies. Finally, the paper argues that large samples of inaccuracy...

  6. US EPA's photovoltaic demand-side management project. Report for September 1992-July 1993

    International Nuclear Information System (INIS)

    Kern, E.C.; Spiegel, R.J.

    1993-01-01

    The paper discusses an investigation of how photovoltaics (PV) may be used as both a pollution-mitigating energy replacement for fossil fuels and a demand-side management (DSM) option to reduce peak electrical demands of commercial and residential buildings. Eleven electric utilities are partners in this first nationwide demonstration of PV DSM. The approach is to install and monitor standardized PV systems in diverse geographic areas with varying solar energy resource and electric power demand, production, and cost conditions. The systems are being monitored for a year to record direct and diffuse irradiance, ambient air temperature, PV power generation, and building loads. Utilities are providing the electric system operations data needed to determine the pollution mitigation and peak demand reduction that can result from the PV electrical power generation

  7. Modeling and Analysis of Commercial Building Electrical Loads for Demand Side Management

    Science.gov (United States)

    Berardino, Jonathan

    In recent years there has been a push in the electric power industry for more customer involvement in the electricity markets. Traditionally the end user has played a passive role in the planning and operation of the power grid. However, many energy markets have begun opening up opportunities to consumers who wish to commit a certain amount of their electrical load under various demand side management programs. The potential benefits of more demand participation include reduced operating costs and new revenue opportunities for the consumer, as well as more reliable and secure operations for the utilities. The management of these load resources creates challenges and opportunities to the end user that were not present in previous market structures. This work examines the behavior of commercial-type building electrical loads and their capacity for supporting demand side management actions. This work is motivated by the need for accurate and dynamic tools to aid in the advancement of demand side operations. A dynamic load model is proposed for capturing the response of controllable building loads. Building-specific load forecasting techniques are developed, with particular focus paid to the integration of building management system (BMS) information. These approaches are tested using Drexel University building data. The application of building-specific load forecasts and dynamic load modeling to the optimal scheduling of multi-building systems in the energy market is proposed. Sources of potential load uncertainty are introduced in the proposed energy management problem formulation in order to investigate the impact on the resulting load schedule.

  8. The demand-side innovation policies and sustainable development in the small EU country. Nõudluspoolsed innovatsioonipoliitikad ja jätkusuutlik areng Euroopa Liidu väikeriigis

    Directory of Open Access Journals (Sweden)

    Tõnu Roolaht

    2012-01-01

    Full Text Available Various regulations, standards, public procurement activities, subsidies for private demand, and other similar support measures form the demand-side innovation policies. In the modern era, countries and governments dedicate more and more attention to the economic, social, and environmental sustainability of development and entrepreneurship. Sustainable development aims to meet human needs so that economic and social conditions will improve or at least not deteriorate and environment is preserved in order to allow future generations to meet their needs as well. Several demand-side innovation policy measures target also sustainability either as primary or secondary goal. Such policy measures tend to suffer from overshooting effects or fail to influence the behaviour in a desired manner. The purpose of this study is to offer suggestions concerning demand-side policy measures in order to improve their impact on the sustainability of development

  9. How to introduce demand side resources in the design of low-carbon power systems in China

    Science.gov (United States)

    Zhou, Pengcheng; Liu, Yiqun; Zeng, Ming; Sun, Chenjun

    2018-04-01

    Nowadays, China's energy demand sustained rapid growth, and the coal-based energy structure has adverse effects on the environment. The flexibility of demand side resource (DSR) will be greatly improved, and DSR can reduce electricity consumption actively and temporarily, and realize energy saving and emission reduction. But there are still some problems to introduce DSR in China. This paper proposes three practices for introducing demand side resources to improve the flexibility of power systems through demand resources.

  10. Demand-side management and European environmental and energy goals: An optimal complementary approach

    International Nuclear Information System (INIS)

    Bergaentzlé, Claire; Clastres, Cédric; Khalfallah, Haikel

    2014-01-01

    Demand side management (DSM) in electricity markets could improve energy efficiency and achieve environmental targets through controlled consumption. For the past 10 years or so DSM programmes have registered significant results. However, detailed analysis of its real impact as observed by a large number of pilot studies suggests that such programmes need to be fine-tuned to suit clearly identified conditions. This study aims to provide recommendations for the instruments to be used to prompt demand response with a view to maximizing energy and environmental efficiencies of various countries. The present study suggests that different DSM models should be deployed depending on the specific generation mix in any given country. Beside the natural benefits from cross-borders infrastructures, DSM improves the flexibility and reliability of the energy system, absorbing some shock on generation mix. We show efficiency increases with demand response but at a decreasing rate. So, according to rebound and report effects, simple DSM tools could be preferred. - Highlights: • Demand side management could improve energy and environmental efficiency. • Several instruments should be used to achieve significant load-shedding. • DSM models should be deployed depending on generation mix. • Efficiency increases with demand response but at a decreasing rate. • Rebound and report effects reduce positive impacts

  11. Demand Side Management for the European Supergrid: Occupancy variances of European single-person households

    International Nuclear Information System (INIS)

    Torriti, Jacopo

    2012-01-01

    The prospect of a European Supergrid calls for research on aggregate electricity peak demand and Europe-wide Demand Side Management. No attempt has been made as yet to represent a time-related demand curve of residential electricity consumption at the European level. This article assesses how active occupancy levels of single-person households vary in single-person household in 15 European countries. It makes use of occupancy time-series data from the Harmonised European Time Use Survey database to build European occupancy curves; identify peak occupancy periods; construct time-related electricity demand curves for TV and video watching activities and assess occupancy variances of single-person households. - Highlights: ► Morning peak occupancies of European single households tale place between 7h30 and 7h40. ► Evening peaks take place between 20h10 and 20h20. ► TV and video activities during evening peaks make up about 3.1 GWh of European peak electricity load. ► Baseline and peak occupancy variances vary across countries. ► Baseline and peak occupancy variances can be used as input for Demand Side Management choices.

  12. A System Architecture for Autonomous Demand Side Load Management in Smart Buildings

    DEFF Research Database (Denmark)

    Costanzo, Giuseppe Tommaso; Zhu, Guchuan; Anjos, Miguel F.

    2012-01-01

    This paper presents a system architecture for load management in smart buildings which enables autonomous demand side load management in the smart grid. Being of a layered structure composed of three main modules for admission control, load balancing, and demand response management...... in multiple time-scales and allows seamless integration of diverse techniques for online operation control, optimal scheduling, and dynamic pricing. The design of a home energy manager based on this architecture is illustrated and the simulation results with Matlab/Simulink confirm the viability...

  13. From demand side management (DSM) to energy efficiency services: A Finnish case study

    International Nuclear Information System (INIS)

    Apajalahti, Eeva-Lotta; Lovio, Raimo; Heiskanen, Eva

    2015-01-01

    Energy conservation is expected to contribute significantly to climate change mitigation and energy security. Traditionally, energy companies have had strong role in providing Demand Side Management (DSM) measures. However, after energy market liberalization in Europe, energy companies' DSM activities declined. In response, the EU issued Directive (2006/32/EC) on energy end-use efficiency and energy services (ESD) to motivate energy companies to promote energy efficiency and conservation, closely followed by Directive (2012/27/EU) on energy efficiency (EED), requiring the setting up energy efficiency obligation schemes. Despite strong political and economic motivation, energy companies struggle to develop energy efficiency services in liberalised energy markets due to conflicting institutional demands, which arise from contradicting policy requirements and customer relations. The main challenges in developing new innovative energy efficiency services, evidenced by an in-depth case study, were (1) the unbundling of energy company operations, which makes it difficult to develop services when the contribution of several business units is required and (2) the distrust among energy end-users, which renders the business logic of energy saving contract models self-contradictory. On the basis of the research, avenues out of these dilemmas are suggested. -- Highlights: •Energy companies struggle to become energy service provides •We explore the development of new energy saving business solutions •Dispersed organisational structure leaves energy saving business as isolated function •Strong consumer scepticism towards energy companies as providers of energy saving •More emphasis on the changing company-customer relationship is needed

  14. An analysis of the factors influencing demand-side management activity in the electric utility industry

    Science.gov (United States)

    Bock, Mark Joseph

    Demand-side management (DSM), defined as the "planning, implementation, and monitoring of utility activities designed to encourage consumers to modify their pattern of electricity usage, including the timing and level of electricity demand," is a relatively new concept in the U.S. electric power industry. Nevertheless, in twenty years since it was first introduced, utility expenditures on DSM programs, as well as the number of such programs, have grown rapidly. At first glance, it may seem peculiar that a firm would actively attempt to reduce demand for its primary product. There are two primary explanations as to why a utility might pursue DSM: regulatory mandate, and self-interest. The purpose of this dissertation is to determine the impact these influences have on the amount of DSM undertaken by utilities. This research is important for two reasons. First, it provides insight into whether DSM will continue to exist as competition becomes more prevalent in the industry. Secondly, it is important because no one has taken a comprehensive look at firm-level DSM activity on an industry-wide basis. The primary data set used in this dissertation is the U.S. Department of Energy's Annual Electric Utility Report, Form EIA-861, which represents the most comprehensive data set available for analyzing DSM activity in the U.S. There are four measures of DSM activity in this data set: (1) utility expenditures on DSM programs; (2) energy savings by DSM program participants; and (3) the actual and (4) the potential reductions in peak load resulting from utility DSM measures. Each is used as the dependent variable in an econometric analysis where independent variables include various utility characteristics, regulatory characteristics, and service territory and customer characteristics. In general, the results from the econometric analysis suggest that in 1993, DSM activity was primarily the result of regulatory pressure. All of the evidence suggests that if DSM continues to

  15. Addressing maternal healthcare through demand side financial incentives: experience of Janani Suraksha Yojana program in India.

    Science.gov (United States)

    Gopalan, Saji S; Durairaj, Varatharajan

    2012-09-15

    Demand side financing (DSF) is a widely employed strategy to enhance utilization of healthcare. The impact of DSF on health care seeking in general and that of maternal care in particular is already known. Yet, its effect on financial access to care, out-of-pocket spending (OOPS) and provider motivations is not considerably established. Without such evidence, DSFs may not be recommendable to build up any sustainable healthcare delivery approach. This study explores the above aspects on India's Janani Suraksha Yojana (JSY) program. This study employed design and was conducted in three districts of Orissa, selected through a three-stage stratified sampling. The quantitative method was used to review the Health Management Information System (HMIS). The qualitative methods included focus groups discussions with beneficiaries (n = 19) and community intermediaries (n = 9), and interviews (n = 7) with Ministry of Health officials. HMIS data enabled to review maternal healthcare utilization. Group discussions and interviews explored the perceived impact of JSY on in-facility delivery, OOPS, healthcare costs, quality of care and performance motivation of community health workers. The number of institutional deliveries, ante-and post-natal care visits increased after the introduction of JSY with an annual net growth of 18.1%, 3.6% and 5% respectively. The financial incentive provided partial financial risk-protection as it could cover only 25.5% of the maternal healthcare cost of the beneficiaries in rural areas and 14.3% in urban areas. The incentive induced fresh out-of-pocket spending for some mothers and it could not address maternal care requirements comprehensively. An activity-based community worker model was encouraging to augment maternal healthcare consumption. However, the existing level of financial incentives and systemic support were inadequate to motivate the volunteers optimally on their performance. Demand side financial incentive could enhance financial

  16. Addressing maternal healthcare through demand side financial incentives: experience of Janani Suraksha Yojana program in India

    Directory of Open Access Journals (Sweden)

    Gopalan Saji S

    2012-09-01

    performance. Conclusion Demand side financial incentive could enhance financial access to maternal healthcare. However, it did not adequately protect households from financial risks. An effective integration of JSY with similar social protection or financial risk-protection measures may protect mothers substantially from potential out-of-pocket spending. Further, this integrated approach may help upholding more awareness on maternal health rights and entitlements. It can also address maternal health beyond ‘maternal healthcare’ and ensure sustainability through pooled financial and non-financial resources.

  17. Accurate Estimation of Target amounts Using Expanded BASS Model for Demand-Side Management

    Science.gov (United States)

    Kim, Hyun-Woong; Park, Jong-Jin; Kim, Jin-O.

    2008-10-01

    The electricity demand in Korea has rapidly increased along with a steady economic growth since 1970s. Therefore Korea has positively propelled not only SSM (Supply-Side Management) but also DSM (Demand-Side Management) activities to reduce investment cost of generating units and to save supply costs of electricity through the enhancement of whole national energy utilization efficiency. However study for rebate, which have influence on success or failure on DSM program, is not sufficient. This paper executed to modeling mathematically expanded Bass model considering rebates, which have influence on penetration amounts for DSM program. To reflect rebate effect more preciously, the pricing function using in expanded Bass model directly reflects response of potential participants for rebate level.

  18. Optimal Load Response to Time-of-Use Power Price for Demand Side Management in Denmark

    DEFF Research Database (Denmark)

    Hu, Weihao; Chen, Zhe; Bak-Jensen, Birgitte

    2010-01-01

    -of-use power price for demand side management in order to save the energy costs as much as possible. 3 typical different kinds of loads (industrial load, residential load and commercial load) in Denmark are chosen as study cases. The energy costs decrease up to 9.6% with optimal load response to time......-of-use power price for different loads. Simulation results show that the optimal load response to time-of-use power price for demand side management generates different load profiles and reduces the load peaks. This kind of load patterns may also have significant effects on the power system normal operation.......Since the hourly spot market price is available one day ahead in Denmark, the price could be transferred to the consumers and they may shift their loads from high price periods to the low price periods in order to save their energy costs. This paper presents a load optimization method to time...

  19. A Smart Grid Framework for Optimally Integrating Supply-Side, Demand-Side and Transmission Line Management Systems

    Directory of Open Access Journals (Sweden)

    Chukwuka Monyei

    2018-04-01

    Full Text Available A coordinated centralized energy management system (ConCEMS is presented in this paper that seeks to integrate for optimal grid operation—the supply side energy management system (SSEMS, home energy management system (HEMS and transmission line management system (TLMS. ConCEMS in ensuring the optimal operation of an IEEE 30-bus electricity network harmonizes the individual objective function of SSEMS, HEMS and TLMS to evolve an optimal dispatch of participating demand response (DR loads that does not violate transmission line ampacity limits (TLMS constraint while minimizing consumer cost (HEMS constraint and supply side operations cost (SSEMS constraint. An externally constrained genetic algorithm (ExC-GA that is influenced by feedback from TLMS is also presented that intelligently varies the dispatch time of participating DR loads to meet the individual objective functions. Hypothetical day ahead dynamic pricing schemes (Price1, Price2 and Price3 have also been adopted alongside an existing time of use (Price0 pricing scheme for comparison and discussion while a dynamic thermal line rating (DTLR algorithm has also been incorporated to dynamically compute power limits based on real time associated data.

  20. Demand-side management project for Tenaga Nasional Berhad. Progress report No. 4. Export trade information

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    This study, conducted by the California Energy Commission, was funded by the U.S. Trade and Development Agency. Progress Report No. 4 is divided into the following contents: April 6, 1994 Training Mission Delegation Itinerary; April 6, 1994 Training Mission Workshop Information Package; Letter to Chairman of Tenaga Nasional Berhad Requesting Demonstration Project Funding; Design/Build Construction Bid Proposal for Energy Efficient Electric Technology Demontration Project; Final Draft of Demand-Side Management Plan for Tenaga Nasional Berhad; Attachments.

  1. Electronic Health Records Prospects in Egypt: A Demand-Side Perspective

    OpenAIRE

    Badran; Mona Farid

    2017-01-01

    The present study sheds light on the expected factors that would impact the Electronic Health Records (EHR) service in Egypt from the demand-side perspective, i.e. the health care consumer. This empirical study is motivated by the widespread use of EHR as a method of promoting health services globally, where it is considered as an efficiency enhancing, cost effective technology. Moreover, the healthcare sector in Egypt is gaining momentum, especially that the comprehensive healthcare and soci...

  2. Potential transportation demand management programs and measures

    Energy Technology Data Exchange (ETDEWEB)

    Litman, T. [Victoria Transport Policy Institute, Victoria, BC (Canada)

    1997-02-07

    The advantages of transportation demand management (TDM) programs were discussed. TDM includes several policies, programs and measures designed to change travel patterns. TDM programs include commute trip reductions, pricing policies, land use management strategies, and programs to support alternative modes of transportation such as public transit, carpooling, bicycling, walking and telecommuting. TDM programs are designed to reduce traffic congestion and air pollution. Some other TDM programs and measures include: enabling programs, alternative mode encouragement, driving disincentives, parking programs, marginalizing user costs, reducing automobile ownership, and land use management.

  3. Game Demands of Seven-A-Side Soccer in Young Players.

    Science.gov (United States)

    Barbero-Alvarez, José C; Gómez-López, Maite; Castagna, Carlo; Barbero-Alvarez, Verónica; Romero, David V; Blanchfield, Anthony W; Nakamura, Fábio Y

    2017-07-01

    Barbero-Alvarez, JC, Gómez-López, M, Castagna, C, Barbero-Alvarez, V, Romero, DV, Blanchfield, AW, and Nakamura, FY. Game demands of seven-a-side soccer in young players. J Strength Cond Res 31(7): 1771-1779, 2017-The aim of this study was to examine the activity patterns and physiological demands of 7-a-side youth soccer matches across 2 chronological age categories (U12 and U14). Twenty-two soccer players of a national youth soccer academy were investigated. Players of each age category performed 2 training matches (2 × 25 minutes) and were monitored by global positioning system and heart rate monitor units. Players of both categories covered similar total distance (5,348 ± 307 m), at similar mean heart rate values (86 ± 4% of maximum). However, the number of high-intensity runs (82.5 ± 17.4 vs. 69.7 ± 15.2) and total distance covered during sprints (264 ± 207 vs. 128 ± 74 m) were significantly (p ≤ 0.05) higher in U14 compared with U12. The results suggest a highly demanding nature of 7-a-side soccer for skilled players, with physical maturity possibly influencing the match-related high-intensity performance at these ages.

  4. Renewable generation versus demand-side management. A comparison for the Spanish market

    International Nuclear Information System (INIS)

    Roldán Fernández, Juan Manuel; Burgos Payán, Manuel; Riquelme Santos, Jesús Manuel; Trigo García, Ángel Luis

    2016-01-01

    Conventionally the required instantaneous balance generation-load is achieved by adjusting production to fit variable consumer demand. Nowadays, a significant and increasing segment of generation is renewable. But renewable production cannot be scheduled on request since its generation is dependent on nature (wind, sun, …). In this context, demand-side management (DSM) would help since it would be advisable for part of the flexibility to be provided by the demand. The integration of renewable production and demand-side management (DSM), are compared in this work for Spain throughout 2008–2014. First a qualitative model, based on the linearization of the wholesale market, is employed to explore some hypotheses. A set of scenarios are then examined to quantify the main effects on the market. The results show that DSM exhibits the best performance in terms of economic efficiency and environmental sustainability, as well as for the reduction of load peaks and losses in the system, what suggests the convenience of promoting plans for the replacement of equipment with other more efficient as well as the implementation of real-time tariffs. - Highlights: •The impact of the integration of renewable production versus DSM has been compared. •Merit-order effect related to energy efficiency and to load-shifting is identified. •Large industries achieve energy efficiency with less CAPEX than renewable generation. •Load-shifting cycle yields a reduction of the traded energy and the economic volume.

  5. A Simulation of Rainwater Harvesting Design and Demand-Side Controls for Large Hospitals

    Directory of Open Access Journals (Sweden)

    Lawrence V. Fulton

    2018-05-01

    Full Text Available Inpatient health buildings in the United States are the most intensive users of water among large commercial buildings. Large facilities (greater than 1 million square feet consume an average of 90 million gallons per building per year. The distribution and treatment of water imposes a significant electrical power demand, which may be the single largest energy requirement for various states. Supply and demand-side solutions are needed, particularly in arid and semi-arid regions where water is scarce. This study uses continuous simulations based on 71 years of historical data to estimate how rainwater harvesting systems and demand-side interventions (e.g., low-flow devices, xeriscaping would offset the demand for externally-provided water sources in a semi-arid region. Simulations from time series models are used to generate alternative rainfall models to account for potential non-stationarity and volatility. Results demonstrate that hospital external water consumption might be reduced by approximately 25% using conservative assumptions and depending on the design of experiment parameters associated with rainfall capture area, building size, holding tank specifications, and conservation efforts.

  6. Demand-Side Management and European environmental and energy goals. An optimal complementary approach

    International Nuclear Information System (INIS)

    Bergaentzle, Claire; Clastres, Cedric; Khalfallah, Haikel

    2013-12-01

    Demand side management (DSM) in electricity markets could improve energy efficiency and achieve environmental targets through controlled consumption. For the past 10 years or so DSM programs have registered significant results. However, detailed analysis of its real impact as observed by a large number of pilot studies suggests that such programs need to be fine-tuned to suit clearly identified conditions. This study aims to provide recommendations for the instruments to be used to prompt demand response with a view to maximizing energy and environmental efficiencies of various countries. The present study suggests that different DSM models should be deployed depending on the specific generation mix in any given country. Beside the natural benefits from cross-borders infrastructures, DSM improves the flexibility and reliability of the energy system, absorbing some shock on generation mix. We show efficiency increases with demand response but at a decreasing rate. So, according to rebound and report effects, simple DSM tools could be preferred. (authors)

  7. Dynamics of energy-related CO2 emissions in China during 1980-2002: the relative importance of energy supply-side and demand-side effects

    International Nuclear Information System (INIS)

    Libo Wu; Kaneko, Shinji; Matsuoka, Shunji

    2006-01-01

    Based on a newly developed model that integrates energy production, transformation and consumption processes, this paper compares the relative importance of some traditionally recognized factors operating on the energy demand side with a body of newly defined factors on the supply side, in terms of their contribution to trends in China's CO 2 emissions related to the total primary energy supply (C-TPES). Before 1996, changes in China's C-TPES were mainly driven by changes on the energy demand side. Factors operating on the energy supply side played trivial roles. During the period 1996-2000, however, increasing demand-side effects declined dramatically and at the same time decreasing effects from supply side expanded significantly. Such changes resulted directly in a decline in the C-TPES. The decreasing effects from international trade as well as statistical imbalances between supply and demand reinforced the declining trend. The shrinkage of demand side effects mainly arose from the slowdown of economic growth and speed of decrease in energy intensity. The expansion of supply-side effects was principally attributed to the speed of decrease in gross unit consumption in transformation sectors, especially in electricity sector. Therefore, the acceleration of efficiency improvements in end-use and transformation sectors accounted for the decline in the C-TPES over the period 1996-2000. (author)

  8. A Novel Prosumer-Based Energy Sharing and Management (PESM) Approach for Cooperative Demand Side Management (DSM) in Smart Grid

    OpenAIRE

    Sohail Razzaq; Rehman Zafar; Naveed Ahmed Khan; Asif Raza Butt; Anzar Mahmood

    2016-01-01

    Increasing population and modern lifestyle have raised energy demands globally. Demand Side Management (DSM) is one important tool used to manage energy demands. It employs an advanced power infrastructure along with bi-directional information flow among utilities and users in order to achieve a balanced load curve and minimize demand-supply mismatch. Traditionally, this involves shifting the electricity demand from peak hours to other times of the day in an optimized manner. Multiple users e...

  9. Smart grids and power systems efficiency: regulatory tools and demand-side management impacts

    International Nuclear Information System (INIS)

    Bergaentzle, Claire

    2015-01-01

    induced by peak shedding. To this end, we develop and use a linear optimization model and expand our analysis to interconnected countries endowed with differentiated generation means. The thesis shows dominant regulatory frameworks are unsuited to provide the necessary sets of incentive to efficiently develop smart technologies. This can cause delays in their integration to power grids. The quantitative evaluation of the impacts generated by demand-side management shows significant efficiency gains are achievable through final consumers' flexibility. However, such measures create new discrepancies regarding installed capacities profitability, future capacity adequacy, and highlight potential antagonism between missing money for flexible peak capacities and the development of low carbon energies. It is clear the issues raised by the development of smart grids call for informed public debate as power industries are essential to our societies. Among the considerable amount of elements to discuss, issues relative to financing the investment projects and the inclusion of the new sources of flexibility induced by the technology in competitive markets will be of priority. (author) [fr

  10. A distributed algorithm for demand-side management: Selling back to the grid.

    Science.gov (United States)

    Latifi, Milad; Khalili, Azam; Rastegarnia, Amir; Zandi, Sajad; Bazzi, Wael M

    2017-11-01

    Demand side energy consumption scheduling is a well-known issue in the smart grid research area. However, there is lack of a comprehensive method to manage the demand side and consumer behavior in order to obtain an optimum solution. The method needs to address several aspects, including the scale-free requirement and distributed nature of the problem, consideration of renewable resources, allowing consumers to sell electricity back to the main grid, and adaptivity to a local change in the solution point. In addition, the model should allow compensation to consumers and ensurance of certain satisfaction levels. To tackle these issues, this paper proposes a novel autonomous demand side management technique which minimizes consumer utility costs and maximizes consumer comfort levels in a fully distributed manner. The technique uses a new logarithmic cost function and allows consumers to sell excess electricity (e.g. from renewable resources) back to the grid in order to reduce their electric utility bill. To develop the proposed scheme, we first formulate the problem as a constrained convex minimization problem. Then, it is converted to an unconstrained version using the segmentation-based penalty method. At each consumer location, we deploy an adaptive diffusion approach to obtain the solution in a distributed fashion. The use of adaptive diffusion makes it possible for consumers to find the optimum energy consumption schedule with a small number of information exchanges. Moreover, the proposed method is able to track drifts resulting from changes in the price parameters and consumer preferences. Simulations and numerical results show that our framework can reduce the total load demand peaks, lower the consumer utility bill, and improve the consumer comfort level.

  11. A distributed algorithm for demand-side management: Selling back to the grid

    Directory of Open Access Journals (Sweden)

    Milad Latifi

    2017-11-01

    Full Text Available Demand side energy consumption scheduling is a well-known issue in the smart grid research area. However, there is lack of a comprehensive method to manage the demand side and consumer behavior in order to obtain an optimum solution. The method needs to address several aspects, including the scale-free requirement and distributed nature of the problem, consideration of renewable resources, allowing consumers to sell electricity back to the main grid, and adaptivity to a local change in the solution point. In addition, the model should allow compensation to consumers and ensurance of certain satisfaction levels. To tackle these issues, this paper proposes a novel autonomous demand side management technique which minimizes consumer utility costs and maximizes consumer comfort levels in a fully distributed manner. The technique uses a new logarithmic cost function and allows consumers to sell excess electricity (e.g. from renewable resources back to the grid in order to reduce their electric utility bill. To develop the proposed scheme, we first formulate the problem as a constrained convex minimization problem. Then, it is converted to an unconstrained version using the segmentation-based penalty method. At each consumer location, we deploy an adaptive diffusion approach to obtain the solution in a distributed fashion. The use of adaptive diffusion makes it possible for consumers to find the optimum energy consumption schedule with a small number of information exchanges. Moreover, the proposed method is able to track drifts resulting from changes in the price parameters and consumer preferences. Simulations and numerical results show that our framework can reduce the total load demand peaks, lower the consumer utility bill, and improve the consumer comfort level. Keywords: Energy, Systems engineering, Electrical engineering

  12. Proceedings of the CEATI demand side management workshop on understanding customer response. CD-ROM ed.

    International Nuclear Information System (INIS)

    2006-01-01

    Demand for electricity continues to increase in the midst of environmental concerns, deregulation and the rapid evolution of technology. In order to succeed in a changing environment, utilities must be both adaptive and innovative. Growing concerns over supply and the environmental effects of rising consumption rates have led many utilities to establish demand side management (DSM) programs. However, some utilities have failed to consider the importance of customer behaviour in the success of DSM programs. This conference examined various successful initiatives to encourage customers to reduce their individual or corporate demands for energy. The influence of branding, technology, information prices signals and various other strategies were explored. Issues concerning energy efficiency and customer feedback were discussed. The effect of alternative pricing regimes on DSM programs was investigated. Various information system tools were also examined, and the value of real time electricity monitoring was evaluated. Various DSM initiatives in North America were used to establish benchmarks for the successful implementation of DSM strategies. The conference was divided into 3 sessions: (1) involving the customer in reducing demand; (2) the success of energy efficiency and demand response programs : the impact of branding and the impact of price signals; and (3) the technologies and innovations needed to make it work. The conference featured 13 presentations, of which 8 have been catalogued separately for inclusion in this database. refs., tabs., figs

  13. Proceedings of the CEATI demand side management workshop on understanding customer response. CD-ROM ed.

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    Demand for electricity continues to increase in the midst of environmental concerns, deregulation and the rapid evolution of technology. In order to succeed in a changing environment, utilities must be both adaptive and innovative. Growing concerns over supply and the environmental effects of rising consumption rates have led many utilities to establish demand side management (DSM) programs. However, some utilities have failed to consider the importance of customer behaviour in the success of DSM programs. This conference examined various successful initiatives to encourage customers to reduce their individual or corporate demands for energy. The influence of branding, technology, information prices signals and various other strategies were explored. Issues concerning energy efficiency and customer feedback were discussed. The effect of alternative pricing regimes on DSM programs was investigated. Various information system tools were also examined, and the value of real time electricity monitoring was evaluated. Various DSM initiatives in North America were used to establish benchmarks for the successful implementation of DSM strategies. The conference was divided into 3 sessions: (1) involving the customer in reducing demand; (2) the success of energy efficiency and demand response programs : the impact of branding and the impact of price signals; and (3) the technologies and innovations needed to make it work. The conference featured 13 presentations, of which 8 have been catalogued separately for inclusion in this database. refs., tabs., figs.

  14. Modulation strategies of integrated HVAC systems used in residential buildings for demand-side management at different scales

    OpenAIRE

    Georges, Emeline

    2017-01-01

    The integration of renewable energy sources in the electricity production mix has an important impact on the management of the electricity grid, due to their intermittency. In particular, to ensure grid balancing, there is a rising need for flexibility, both on the supply and demand sides. A possible solution to help achieve grid balancing is the smart modulation of the electrical load in a "demand following supply" scheme through demand-side management. In this context, the objective of...

  15. Financial incentives for DSM [demand-side management]: Theory and practice

    International Nuclear Information System (INIS)

    Reid, M.W.

    1990-01-01

    Recent efforts to provide incentives for electric utilities in the USA to undertake demand-side management (DSM) programs are reviewed. The major need for incentives is seen as the overcoming of disincentives inherent in traditional regulation that affect utilities' interest in, and motivation for, DSM programs. These disincentives include the failure to recover all program costs, loss of revenues, and loss of financial opportunity. In addition, utilities seldom perceive DSM as a low-risk proposition; principal areas of concern include regulatory risk, competitive risk, and balance sheet risk. In view of these disincentives and risks, any DSM program therefore should provide for full and timely recovery of all program costs; adjust for DSM-induced revenue losses; and counterbalance risk and loss of financial opportunity by providing a bonus above cost. Three utility-specific incentive proposals are presented for the case of utilities in New York, Massachusetts, and Pennsylvania. Each of these programs meets the goal of overcoming the disincentives that surround utility DSM programs. The most significant differences across the mechanisms are found in the bonus component. Mechanisms that reduce the utility's uncertainty about the receipt of a bonus by providing it in a lump sum will likely prove more powerful motivators than those that spread the bonus out over a period of years. Use of preapproved per-unit or per-customer impact measurements reduces uncertainty and thus increases the apparent value of the bonus. Annual review of program plans and assumed impacts, supported by continuing evaluation activities, minimizes the risk that the utilities will gamble with the system or receive excessive awards. 6 refs

  16. Barriers and Opportunities to Broader Adoption of Integrated Demand Side Management at Electric Utilities: A Scoping Study

    Energy Technology Data Exchange (ETDEWEB)

    Potter, Jennifer [Hawaii Natural Energy Institute, Honolulu, HI (United States); Stuart, Elizabeth [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Energy Analysis and Environmental Impacts Div.; Cappers, P [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Energy Analysis and Environmental Impacts Div.

    2018-02-13

    Integrated demand-side management (IDSM) is a strategic approach to designing and delivering a portfolio of demand side management (DSM) programs to customers. IDSM typically delivers customer centric strategies with the goal of increasing the amount of DSM in the field, but doing so in a way that integrates various measures and technologies to improve their collective performance and/or penetration. Specifically, IDSM can be defined as the integrated or coordinated delivery of three or more of: (1) energy efficiency (EE), (2) demand response (DR), (3) distributed generation (DG), (4) storage, (5) electric vehicle (EV) technologies, and (6) time-based rate programs to residential and commercial electric utility customers. The electric industry’s limited experience deploying IDSM to date suggests that significant barriers may exist. A Berkeley Lab report “Barriers and Opportunities to Broader Adoption of Integrated Demand Side Management at Electric Utilities: A Scoping Study” explores recent electric utility experience with IDSM to provide an assessment of the barriers and potential benefits perceived or experienced by program administrators in their attempts to implement integrated programs. The research draws on surveys and interviews with eleven staff from a sample of eight DSM program administrators and program implementers who were currently implementing or had previously attempted to implement an IDSM program or initiative. Respondents provided their perspectives on drivers for IDSM and barriers to broader deployment. They also reported on actions they had undertaken to promote expanded delivery of IDSM and provided their assessments of the most important under-tapped opportunities for expanding IDSM efforts, both for program administrator and regulatory organizations.

  17. Demand side management for commercial buildings using an in line heat pump water heating methodology

    International Nuclear Information System (INIS)

    Rankin, Riaan; Rousseau, Pieter G.; Eldik, Martin van

    2004-01-01

    Most of the sanitary hot water used in South African buildings is heated by means of direct electrical resistance heaters. This is one of the major contributors to the undesirably high morning and afternoon peaks imposed on the national electricity supply grid. For this reason, water heating continues to be of concern to the electricity supplier, ESCOM. Previous studies, conducted by the Potchefstroom University for Christian Higher Education in South Africa, indicated that extensive application of the so called inline heat pump water heating methodology in commercial buildings could result in significant demand side management savings to ESKOM. Furthermore, impressive paybacks can be obtained by building owners who choose to implement the design methodology on existing or new systems. Currently, a few examples exist where the design methodology has been successfully implemented. These installations are monitored with a fully web centric monitoring system that allows 24 h access to data from each installation. Based on these preliminary results, a total peak demand reduction of 108 MW can be achieved, which represents 18% of the peak load reduction target set by ESKOM until the year 2015. This represents an avoided cost of approximately MR324 (ZAR) [Int J Energy Res 25(4) (1999) 2000]. Results based on actual data from the monitored installations shows a significant peak demand reduction for each installation. In one installation, a hotel with an occupancy of 220 people, the peak demand contribution of the hot water installation was reduced by 86%, realizing a 36% reduction in peak demand for the whole building. The savings incurred by the building owner also included significant energy consumption savings due to the superior energy efficiency of the heat pump water heater. The combined savings result in a conservatively calculated straight payback period of 12.5 months, with an internal rate of return of 98%. The actual cost of water heating is studied by

  18. Integrating Demand-Side Resources into the Electric Grid: Economic and Environmental Considerations

    Science.gov (United States)

    Fisher, Michael J.

    Demand-side resources are taking an increasingly prominent role in providing essential grid services once provided by thermal power plants. This thesis considers the economic feasibility and environmental effects of integrating demand-side resources into the electric grid with consideration given to the diversity of market and environmental conditions that can affect their behavior. Chapter 2 explores the private economics and system-level carbon dioxide reduction when using demand response for spinning reserve. Steady end uses like lighting are more than twice as profitable as seasonal end uses because spinning reserve is needed year-round. Avoided carbon emission damages from using demand response instead of fossil fuel generation for spinning reserve are sufficient to justify incentives for demand response resources. Chapter 3 quantifies the system-level net emissions rate and private economics of behind-the-meter energy storage. Net emission rates are lower than marginal emission rates for power plants and in-line with estimates of net emission rates from grid-level storage. The economics are favorable for many buildings in regions with high demand charges like California and New York, even without subsidies. Future penetration into regions with average charges like Pennsylvania will depend greatly on installation cost reductions and wholesale prices for ancillary services. Chapter 4 outlines a novel econometric model to quantify potential revenues from energy storage that reduces demand charges. The model is based on a novel predictive metric that is derived from the building's load profile. Normalized revenue estimates are independent of the power capacity of the battery holding other performance characteristics equal, which can be used to calculate the profit-maximizing storage size. Chapter 5 analyzes the economic feasibility of flow batteries in the commercial and industrial market. Flow batteries at a 4-hour duration must be less expensive on a dollar per

  19. The Demand Side Response to Multi-zone Tariffs. Consumer Test Results

    Directory of Open Access Journals (Sweden)

    Adam Olszewski

    2015-12-01

    Full Text Available Advanced Metering Infrastructure (AMI is a technologically advanced solution currently implemented by the most innovative distribution system operators. ENERGA-OPERATOR SA set about preparing for smart metering implementation in 2010. So far the company has installed over 400,000 meters in its area, and plans to install a further 450,000 in 2015. Kalisz, the first fully AMI-covered city in Poland, was chosen for an in-depth analysis of the system. In particular, a consumer test was conducted there with the intention of answering the question about the strength of the demand side response to multi-zone tariffs and power reduction. Conclusions from the year-long test show the demand side response to multi-zone tariffs – i.e. the maximum temporary percentage reduction of energy consumption in the time zone with the tariff raised by a min. of 80% – stays within the 5–15% range. In the case of power reduction (the maximum temporary reduction of energy consumption in the time zone when the power available to a household is limited to 1 kW – the demand side response stays within the 10–30% range. An additional effect of tariff diversification and smart metering is a reduction in electricity consumption by 1–4% on working days (i.e. this is the effect of either the consumption reduction or shifting it to weekends. During the test energy consumers were subjected to both price incentives and education. Due to the fact that it is difficult to separate the effects of education and tariff structures, the company plans to continue the research related to verifying the effectiveness of individual activation tools in reducing electricity consumption by households.

  20. Demand side management for remote area power supply systems incorporating solar irradiance model

    International Nuclear Information System (INIS)

    Al-Alawi, A.; Islam, S.M.

    2004-01-01

    This paper presents a technique for generating the daily electricity load profile for remote areas in the Middle East from first principles, using diversified demand. The generated load profile includes the energy required to run a small desalination unit to provide the necessary freshwater. Demand side management (DSM) is used in this study to smooth out the daily peaks and fill valleys in the load curve to make the most efficient use of energy resources. Finally, the load profile is compared with real data for six houses collected from Safri area in the Sultanate of Oman. These data may be used as the basis to obtain load profiles of other remote areas of the Middle East since the weather and social factors are similar. The modified hourly variation factor based on weather and economic and social factors of the Middle East is obtained. (author)

  1. Integrated design and evaluation of biomass energy system taking into consideration demand side characteristics

    International Nuclear Information System (INIS)

    Ren, Hongbo; Zhou, Weisheng; Nakagami, Ken'ichi; Gao, Weijun

    2010-01-01

    In this paper, a linear programming model has been developed for the design and evaluation of biomass energy system, while taking into consideration demand side characteristics. The objective function to be minimized is the total annual cost of the energy system for a given customer equipped with a biomass combined cooling, heating and power (CCHP) plant, as well as a backup boiler fueled by city gas. The results obtained from the implementation of the model demonstrate the optimal system capacities that customers could employ given their electrical and thermal demands. As an illustrative example, an investigation addresses the optimal biomass CCHP system for a residential area located in Kitakyushu Science and Research Park, Japan. In addition, sensitivity analyses have been elaborated in order to show how the optimal solutions would vary due to changes of some key parameters including electricity and city gas tariffs, biogas price, electricity buy-back price, as well as carbon tax rate. (author)

  2. Principles concerning the progress of the gas demand side management in Romania

    International Nuclear Information System (INIS)

    Leca, A.; Statie, E.; Nistoran, D.

    1996-01-01

    The consequences of the application of demand side management (DSM) and integrated resources planning (IRP) notions for natural gas are analysed. Present socio-economic context in Romania - from a geopolitical point of view - obviously highlights a set of difficult gas supply problems in our country related to: the impossibility of satisfying the consumption demand from internal resources; the necessity of ensuring by imports of an important quantity of gas, which entails an important foreign currency expenditure and possible political pressures which an unique supplier could exert; the requirement of alignment to the western European country legislation, at an institutional and economical practice level. Each of these problems related to the gas-based power production and all together impose the tackling of DSM and IRP requirements from a strategic point of view. Some conclusions and proposals are presented. (author) 1 fig., 4 refs

  3. Demand-Side Energy Management Based on Nonconvex Optimization in Smart Grid

    Directory of Open Access Journals (Sweden)

    Kai Ma

    2017-10-01

    Full Text Available Demand-side energy management is used for regulating the consumers’ energy usage in smart grid. With the guidance of the grid’s price policy, the consumers can change their energy consumption in response. The objective of this study is jointly optimizing the load status and electric supply, in order to make a tradeoff between the electric cost and the thermal comfort. The problem is formulated into a nonconvex optimization model. The multiplier method is used to solve the constrained optimization, and the objective function is transformed to the augmented Lagrangian function without constraints. Hence, the Powell direction acceleration method with advance and retreat is applied to solve the unconstrained optimization. Numerical results show that the proposed algorithm can achieve the balance between the electric supply and demand, and the optimization variables converge to the optimum.

  4. Communications technologies for demand side management, DSM, and European utility communications architecture, EurUCA

    Energy Technology Data Exchange (ETDEWEB)

    Uuspaeae, P. [VTT Energy, Espoo (Finland)

    1996-12-31

    The scope of this research is data communications for electric utilities. Demand Side Management (DSM) calls for communication between the Electric Utility and the Customer. The communication capacity needed will depend on the functions that are chosen for DSM, and on the number of customers. Some functions may be handled with one-way communications, some functions require two-way communication. Utility Communication Architecture looks for an overall view of the communications needs and communication systems in an electric utility. The objective is to define and specify suitable and compatible communications procedures within the Utility and also to outside parties. (27 refs.)

  5. Communications technologies for demand side management, DSM, and European utility communications architecture, EurUCA

    Energy Technology Data Exchange (ETDEWEB)

    Uuspaeae, P [VTT Energy, Espoo (Finland)

    1997-12-31

    The scope of this research is data communications for electric utilities. Demand Side Management (DSM) calls for communication between the Electric Utility and the Customer. The communication capacity needed will depend on the functions that are chosen for DSM, and on the number of customers. Some functions may be handled with one-way communications, some functions require two-way communication. Utility Communication Architecture looks for an overall view of the communications needs and communication systems in an electric utility. The objective is to define and specify suitable and compatible communications procedures within the Utility and also to outside parties. (27 refs.)

  6. Optimization Models and Methods for Demand-Side Management of Residential Users: A Survey

    Directory of Open Access Journals (Sweden)

    Antimo Barbato

    2014-09-01

    Full Text Available The residential sector is currently one of the major contributors to the global energy balance. However, the energy demand of residential users has been so far largely uncontrollable and inelastic with respect to the power grid conditions. With the massive introduction of renewable energy sources and the large variations in energy flows, also the residential sector is required to provide some flexibility in energy use so as to contribute to the stability and efficiency of the electric system. To address this issue, demand management mechanisms can be used to optimally manage the energy resources of customers and their energy demand profiles. A very promising technique is represented by demand-side management (DSM, which consists in a proactive method aimed at making users energy-efficient in the long term. In this paper, we survey the most relevant studies on optimization methods for DSM of residential consumers. Specifically, we review the related literature according to three axes defining contrasting characteristics of the schemes proposed: DSM for individual users versus DSM for cooperative consumers, deterministic DSM versus stochastic DSM and day-ahead DSM versus real-time DSM. Based on this classification, we provide a big picture of the key features of different approaches and techniques and discuss future research directions.

  7. Distributed Demand Side Management with Battery Storage for Smart Home Energy Scheduling

    Directory of Open Access Journals (Sweden)

    Omowunmi Mary Longe

    2017-01-01

    Full Text Available The role of Demand Side Management (DSM with Distributed Energy Storage (DES has been gaining attention in recent studies due to the impact of the latter on energy management in the smart grid. In this work, an Energy Scheduling and Distributed Storage (ESDS algorithm is proposed to be installed into the smart meters of Time-of-Use (TOU pricing consumers possessing in-home energy storage devices. Source of energy supply to the smart home appliances was optimized between the utility grid and the DES device depending on energy tariff and consumer demand satisfaction information. This is to minimize consumer energy expenditure and maximize demand satisfaction simultaneously. The ESDS algorithm was found to offer consumer-friendly and utility-friendly enhancements to the DSM program such as energy, financial, and investment savings, reduced/eliminated consumer dissatisfaction even at peak periods, Peak-to-Average-Ratio (PAR demand reduction, grid energy sustainability, socio-economic benefits, and other associated benefits such as environmental-friendliness.

  8. A novel microgrid demand-side management system for manufacturing facilities

    Science.gov (United States)

    Harper, Terance J.

    Thirty-one percent of annual energy consumption in the United States occurs within the industrial sector, where manufacturing processes account for the largest amount of energy consumption and carbon emissions. For this reason, energy efficiency in manufacturing facilities is increasingly important for reducing operating costs and improving profits. Using microgrids to generate local sustainable power should reduce energy consumption from the main utility grid along with energy costs and carbon emissions. Also, microgrids have the potential to serve as reliable energy generators in international locations where the utility grid is often unstable. For this research, a manufacturing process that had approximately 20 kW of peak demand was matched with a solar photovoltaic array that had a peak output of approximately 3 KW. An innovative Demand-Side Management (DSM) strategy was developed to manage the process loads as part of this smart microgrid system. The DSM algorithm managed the intermittent nature of the microgrid and the instantaneous demand of the manufacturing process. The control algorithm required three input signals; one from the microgrid indicating the availability of renewable energy, another from the manufacturing process indicating energy use as a percent of peak production, and historical data for renewable sources and facility demand. Based on these inputs the algorithm had three modes of operation: normal (business as usual), curtailment (shutting off non-critical loads), and energy storage. The results show that a real-time management of a manufacturing process with a microgrid will reduce electrical consumption and peak demand. The renewable energy system for this research was rated to provide up to 13% of the total manufacturing capacity. With actively managing the process loads with the DSM program alone, electrical consumption from the utility grid was reduced by 17% on average. An additional 24% reduction was accomplished when the microgrid

  9. Visualized study on specific points on demand curves and flow patterns in a single-side heated narrow rectangular channel

    International Nuclear Information System (INIS)

    Wang Junfeng; Huang Yanping; Wang Yanlin

    2011-01-01

    Highlights: → Specific points on the demand curve and flow patterns are visually studied. → Bubbly, churn, and annular flows were observed. → Onset of flow instability and bubbly-churn transition occurs at the same time. → The evolution of specific points and flow pattern transitions were examined. - Abstract: A simultaneous visualization and measurement study on some specific points on demand curves, such as onset of nucleate boiling (ONB), onset of significant void (OSV), onset of flow instability (OFI), and two-phase flow patterns in a single-side heated narrow rectangular channel, having a width of 40 mm and a gap of 3 mm, was carried out. New experimental approaches were adopted to identify OSV and OFI in a narrow rectangular channel. Under experimental conditions, the ONB could be predicted well by the Sato and Matsumura model. The OSV model of Bowring can reasonably predict the OSV if the single-side heated condition is considered. The OFI was close to the saturated boiling point and could be described accurately by Kennedy's correlation. The two-phase flow patterns observed in this experiment could be classified into bubbly, churn, and annular flow. Slug flow was never observed. The OFI always occurred when the bubbles at the channel exit began to coalesce, which corresponded to the beginning of the bubbly-churn transition in flow patterns. Finally, the evolution of specific points and flow pattern transitions were examined in a single-side heated narrow rectangular channel.

  10. New vision of demand side management strategy as the main tool in cooperation suppliers and consumers of electrical energy

    International Nuclear Information System (INIS)

    Szkutnik, J.

    2012-01-01

    The paper presents the complex proposal for the implementation of the demand side management in the Polish energy sector. The issue of demand side management is well known in the world, European and domestic dimensions. The experience of western countries shows that at least to some extent, the demand side management strategy is already implemented there. However, Polish experience is far too insufficient. Demand side management consists in efficient management of energy demand as well as adoption of this demand i.e. changing the load. The decrease of energy consumption in the moment of its peak demand leads to the balance between the demand and supply in the system, which influences the market price of energy. If certain mechanisms are implemented that will cause that final receivers will be willing to adjust their demand for energy, we will create the Demand Response, which is an efficient tool in the demand side management strategy. It is assumed that electronic meters will bring a real quality change. The undertakings based on initiatives of the Polish Energy Regulatory Office that promote the concept of implementation of electronic metering in the Polish energy sector prove that Poland is determined to improve its energy efficiency. The report describes the concept of the electronic meters that enables the realisation of the demand side management strategy as well as other complementary solutions that make the strategy even more efficient. In this field, it is planned to establish a dedicated loyalty programmes for energy receivers. The concept includes also the combination of the model solutions with the campaign 'energy efficiency' organised by the Ministry of Economy, which aims at fulfilling the requirements of the directive 2006/32/EC on energy end-use efficiency and energy services. As complementary solution in this new vision to add the system of recycling of waste heat home appliance devices. (Author)

  11. Grey-box Modelling of a Household Refrigeration Unit Using Time Series Data in Application to Demand Side Management

    DEFF Research Database (Denmark)

    Sossan, Fabrizio; Lakshmanan, Venkatachalam; Costanzo, Giuseppe Tommaso

    2016-01-01

    This paper describes the application of stochastic grey-box modeling to identify electrical power consumption-to-temperature models of a domestic freezer using experimental measurements. The models are formulated using stochastic differential equations (SDEs), estimated by maximum likelihood......) to shift the electricity consumption of a freezer in demand response experiments, thereby addressing the model selection problem also from the application point of view and showing in an experimental context the ability of MPC to exploit the freezer as a demand side resource (DSR)....... estimation (MLE), validated through the model residuals analysis and cross-validated to detect model over-fitting. A nonlinear model based on the reversed Carnot cycle is also presented and included in the modeling performance analysis. As an application of the models, we apply model predictive control (MPC...

  12. Market modeling for assessment of demand side programs using the marginal cost

    International Nuclear Information System (INIS)

    Papastamatiou, Panagiotis; Psarras, John

    2000-01-01

    Demand side management is nowadays considered as a functional step in the energy planning process. The criteria proposed for the assessment of the demand side programs (DSPs) are usually based on the balance between the marginal supply cost and the mean DSP cost. These criteria could not support the allotting of the invested capital to incentives for the consumers and advertising. This paper presents a methodology to support the utility planning at this point with more reliability. It proposes the expansion of the assessment criteria with the use of the marginal cost of the DSP. For the calculation of the DSP marginal cost, a dynamic model is developed and it is used for the simulation of the penetration of a DS Program. Using the 'least-cost' criterion as the decision rule for the simulation, the planner has a distribution of the available investment capital throughout the whole planning period. The use of the 'most-value' criterion supports the separation of the invested capital between incentives for the consumers and supportive expenses, e.g. advertising, marketing cost, etc. (Author)

  13. Development of assessment model for demand-side management investment programs in Korea

    International Nuclear Information System (INIS)

    Lee, Deok Ki; Park, Sang Yong; Park, Soo Uk

    2007-01-01

    The goal of this study is the development of the assessment model for demand-side management investment programs (DSMIPs) in the areas of natural gas and district heating. Demand-side management (DSM) is the process of managing the consumption of energy to optimize available and planned generation resources and DSMIPs are the actions conducted by energy suppliers to promote investment in the DSM. In this research, the analytic hierarchy process (AHP) method was used to develop a scientific and rational assessment model for DSMIPs. To apply the AHP method, assessment indicators for the assessment have been identified by using the concept of 'plan, do, see' and the decision-making hierarchy was established. Then AHP model was developed to set up the priorities of assessment indicators and a survey of experts from government and energy suppliers was carried out. Finally, the priorities of assessment indicators were calculated based on the result of survey using the AHP method. The assessment model developed from this research will actually be used to assess the results of DSMIPs, which is being carried out by Korea gas corporation (KOGAS) and Korea district heating corporation (KDHC). The use of the assessment model developed by this research is expected to contribute to enhance efficiency in planning, execution, and assessment of DSMIPs

  14. Demand-side management (DSM) in the context of China's on-going power sector reform

    International Nuclear Information System (INIS)

    Zhang, Sufang; Jiao, Yiqian; Chen, Wenjun

    2017-01-01

    As an approach to manage power demand-side resources, DSM plays an important role in electric power system. Though DSM was introduced into China in the early 1990s, its benefits have been underutilized. Using literature study, interview methods and three data sources, this paper examines the likely impacts of China's on-going power sector reform on its DSM. It finds that the major constraints to DSM in China are the insufficient and improper market-based DSM mechanism, grid companies’ low motivations for DSM due to their traditional business model, the underdeveloped energy service industry, and electricity end-users’ low motivation for DSM. China's on-going power sector reform will change power transmission and distribution pricing and grid companies’ business model and introduce competition into retail-side. Drawing on these findings, it is concluded that the likely impacts of the new reform on DSM are: governments may attach more importance to DSM; grid companies may have more motivations for DSM investment; electricity end-users’ motivations for DSM may be both enhanced and dampened; electricity retailers’ motivations for DSM may be dampened; demand response application may be enhanced, and more DSM business models may be developed. Finally, policy implications are provided. - Highlights: • Mechanism of and constraints to DSM in China are examined. • China’s on-going power sector reform is overviewed. • DSM is likely to be enhanced under China's on-going power sector reform. • Policy implications are provided.

  15. Multi-objective demand side scheduling considering the operational safety of appliances

    International Nuclear Information System (INIS)

    Du, Y.F.; Jiang, L.; Li, Y.Z.; Counsell, J.; Smith, J.S.

    2016-01-01

    Highlights: • Operational safety of appliances is introduced in multi-objective scheduling. • Relationships between operational safety and other objectives are investigated. • Adopted Pareto approach is compared with Weigh and Constraint approaches. • Decision making of Pareto approach is proposed for final appliances’ scheduling. - Abstract: The safe operation of appliances is of great concern to users. The safety risk increases when the appliances are in operation during periods when users are not at home or when they are asleep. In this paper, multi-objective demand side scheduling is investigated with consideration to the appliances’ operational safety together with the electricity cost and the operational delay. The formulation of appliances’ operational safety is proposed based on users’ at-home status and awake status. Then the relationships between the operational safety and the other two objectives are investigated through the approach of finding the Pareto-optimal front. Moreover, this approach is compared with the Weigh and Constraint approaches. As the Pareto-optimal front consists of a set of optimal solutions, this paper proposes a method to make the final scheduling decision based on the relationships among the multiple objectives. Simulation results demonstrate that the operational safety is improved with the sacrifice of the electricity cost and the operational delay, and that the approach of finding the Pareto-optimal front is effective in presenting comprehensive optimal solutions of the multi-objective demand side scheduling.

  16. Research on Simulation Requirements and Business Architecture of Automated Demand Response in Power Sales Side Market Liberalization

    Science.gov (United States)

    Liu, Yiqun; Zhou, Pengcheng; Zeng, Ming; Chen, Songsong

    2018-01-01

    With the gradual reform of the electricity market, the power sale side liberalization has become the focus of attention as the key task of reform. The open power market provides a good environment for DR (Demand Response). It is of great significance to research the simulation requirements and business architecture of ADR (Automatic Demand Response) in power sale side market liberalization. Firstly, this paper analyzes the simulation requirements of ADR. Secondly, it analyzes the influence factors that the business development of ADR from five aspects after power sale side market liberalization. Finally, Based on ADR technology support system, the business architecture of ADR after power sale side market liberalization is constructed.

  17. Measuring and controlling unfairness in decentralized planning of energy demand

    NARCIS (Netherlands)

    Pournaras, E.; Vasirani, M.; Kooij, R.E.; Aberer, K.

    2014-01-01

    Demand-side energy management improves robustness and efficiency in Smart Grids. Load-adjustment and load-shifting are performed to match demand to available supply. These operations come at a discomfort cost for consumers as their lifestyle is influenced when they adjust or shift in time their

  18. Optimal Multi-scale Demand-side Management for Continuous Power-Intensive Processes

    Science.gov (United States)

    Mitra, Sumit

    With the advent of deregulation in electricity markets and an increasing share of intermittent power generation sources, the profitability of industrial consumers that operate power-intensive processes has become directly linked to the variability in energy prices. Thus, for industrial consumers that are able to adjust to the fluctuations, time-sensitive electricity prices (as part of so-called Demand-Side Management (DSM) in the smart grid) offer potential economical incentives. In this thesis, we introduce optimization models and decomposition strategies for the multi-scale Demand-Side Management of continuous power-intensive processes. On an operational level, we derive a mode formulation for scheduling under time-sensitive electricity prices. The formulation is applied to air separation plants and cement plants to minimize the operating cost. We also describe how a mode formulation can be used for industrial combined heat and power plants that are co-located at integrated chemical sites to increase operating profit by adjusting their steam and electricity production according to their inherent flexibility. Furthermore, a robust optimization formulation is developed to address the uncertainty in electricity prices by accounting for correlations and multiple ranges in the realization of the random variables. On a strategic level, we introduce a multi-scale model that provides an understanding of the value of flexibility of the current plant configuration and the value of additional flexibility in terms of retrofits for Demand-Side Management under product demand uncertainty. The integration of multiple time scales leads to large-scale two-stage stochastic programming problems, for which we need to apply decomposition strategies in order to obtain a good solution within a reasonable amount of time. Hence, we describe two decomposition schemes that can be applied to solve two-stage stochastic programming problems: First, a hybrid bi-level decomposition scheme with

  19. Impact of energy storage in buildings on electricity demand side management

    International Nuclear Information System (INIS)

    Qureshi, Waqar A.; Nair, Nirmal-Kumar C.; Farid, Mohammad M.

    2011-01-01

    Research highlights: → Phase change material (PCM) application for space heating has been implemented and assessed for built environment. → Real-Time Pricing (RTP) is assessed as tool to implement Demand Side Management programs effectively. → Two buildings, with and without PCM, have been compared for space heating using RTP in functional electricity market. → PCM found to offer peak load shifting, energy conservation, and reduction in price of electricity. -- Abstract: This paper assesses impact of using phase change materials (PCM) in buildings to leverage its thermal energy storage capability. The emphasis is from an electricity demand side perspective with case studies that incorporates wholesale electricity market data of New Zealand. The results presented in this paper show that for space heating application significant advantages could be obtained using PCM built structures. These positive impacts include peak load shifting, energy conservation and reduction in peak demand for network line companies and potential reduction in electricity consumption and savings for residential customers. This paper uses a testing facility that consists of two identically designed and shaped offices built at Tamaki Campus location of the University of Auckland, New Zealand. The walls and ceilings of one office are finished with ordinary gypsum boards while the interior of the other office is finished with PCM impregnated gypsum boards. Controlled heating facility is provided in both the offices for maintaining temperature within the range of human comfort. This facility is equipped with advanced data acquisition equipment for data monitoring and archiving both locally within the offices and also remotely. Through actual observations and analysis this paper demonstrates two major impacts of DSM. First, the application of phase change material (PCM) in building environment enabling efficient thermal storage to achieve some reduction in the overall electrical energy

  20. Analysis of Cool Roof Coatings for Residential Demand Side Management in Tropical Australia

    Directory of Open Access Journals (Sweden)

    Wendy Miller

    2015-06-01

    Full Text Available Cool roof coatings have a beneficial impact on reducing the heat load of a range of building types, resulting in reduced cooling energy loads. This study seeks to understand the extent to which cool roof coatings could be used as a residential demand side management (DSM strategy for retrofitting existing housing in a constrained network area in tropical Australia where peak electrical demand is heavily influenced by residential cooling loads. In particular this study seeks to determine whether simulation software used for building regulation purposes can provide networks with the ‘impact certainty’ required by their DSM principles. The building simulation method is supported by a field experiment. Both numerical and experimental data confirm reductions in total consumption (kWh and energy demand (kW. The nature of the regulated simulation software, combined with the diverse nature of residential buildings and their patterns of occupancy, however, mean that simulated results cannot be extrapolated to quantify benefits to a broader distribution network. The study suggests that building data gained from regulatory simulations could be a useful guide for potential impacts of widespread application of cool roof coatings in this region. The practical realization of these positive impacts, however, would require changes to the current business model for the evaluation of DSM strategies. The study provides seven key recommendations that encourage distribution networks to think beyond their infrastructure boundaries, recognising that the broader energy system also includes buildings, appliances and people.

  1. Impacts of Demand-Side Management on Electrical Power Systems: A Review

    Directory of Open Access Journals (Sweden)

    Hussein Jumma Jabir

    2018-04-01

    Full Text Available Electricity demand has grown over the past few years and will continue to grow in the future. The increase in electricity demand is mainly due to industrialization and the shift from a conventional to a smart-grid paradigm. The number of microgrids, renewable energy sources, plug-in electric vehicles and energy storage systems have also risen in recent years. As a result, future electricity grids have to be revamped and adapt to increasing load levels. Thus, new complications associated with future electrical power systems and technologies must be considered. Demand-side management (DSM programs offer promising solutions to these issues and can considerably improve the reliability and financial performances of electrical power systems. This paper presents a review of various initiatives, techniques, impacts and recent developments of the DSM of electrical power systems. The potential benefits derived by implementing DSM in electrical power networks are presented. An extensive literature survey on the impacts of DSM on the reliability of electrical power systems is also provided for the first time. The research gaps within the broad field of DSM are also identified to provide directions for future work.

  2. Distributed Optimisation Algorithm for Demand Side Management in a Grid-Connected Smart Microgrid

    Directory of Open Access Journals (Sweden)

    Omowunmi Mary Longe

    2017-06-01

    Full Text Available The contributions of Distributed Energy Generation (DEG and Distributed Energy Storage (DES for Demand Side Management (DSM purposes in a smart macrogrid or microgrid cannot be over-emphasised. However, standalone DEG and DES can lead to under-utilisation of energy generation by consumers and financial investments; in grid-connection mode, though, DEG and DES can offer arbitrage opportunities for consumers and utility provider(s. A grid-connected smart microgrid comprising heterogeneous (active and passive smart consumers, electric vehicles and a large-scale centralised energy storage is considered in this paper. Efficient energy management by each smart entity is carried out by the proposed Microgrid Energy Management Distributed Optimisation Algorithm (MEM-DOA installed distributively within the network according to consumer type. Each smart consumer optimises its energy consumption and trading for comfort (demand satisfaction and profit. The proposed model was observed to yield better consumer satisfaction, higher financial savings, and reduced Peak-to-Average-Ratio (PAR demand on the utility grid. Other associated benefits of the model include reduced investment on peaker plants, grid reliability and environmental benefits. The MEM-DOA also offered participating smart consumers energy and tariff incentives so that passive smart consumers do not benefit more than active smart consumers, as was the case with some previous energy management algorithms.

  3. A Danish Heat Atlas for Supply Strategies and Demand Side Management

    DEFF Research Database (Denmark)

    Möller, Bernd

    The expansion of district heating, the assessment of the impact of heat supply strategies, as well as the analysis of significant heat demand savings require sound decision support at high detail. Data is needed to continuously quantify potentials and costs of measures in the end-use and supply...... heat demand and possible savings. The location of each building relative to heat supply technologies is mapped and used for the assessment of supply strategies by potentials, costs and environmental impact. Both elements can furthermore be used to balance investments in supply with investments...

  4. Joint Planning Of Energy Storage and Transmission Considering Wind-Storage Combined System and Demand Side Response

    Science.gov (United States)

    Huang, Y.; Liu, B. Z.; Wang, K. Y.; Ai, X.

    2017-12-01

    In response to the new requirements of the operation mode of wind-storage combined system and demand side response for transmission network planning, this paper presents a joint planning of energy storage and transmission considering wind-storage combined system and demand side response. Firstly, the charge-discharge strategy of energy storage system equipped at the outlet of wind farm and demand side response strategy are analysed to achieve the best comprehensive benefits through the coordination of the two. Secondly, in the general transmission network planning model with wind power, both energy storage cost and demand side response cost are added to the objective function. Not only energy storage operation constraints and but also demand side response constraints are introduced into the constraint condition. Based on the classical formulation of TEP, a new formulation is developed considering the simultaneous addition of the charge-discharge strategy of energy storage system equipped at the outlet of the wind farm and demand side response strategy, which belongs to a typical mixed integer linear programming model that can be solved by mature optimization software. The case study based on the Garver-6 bus system shows that the validity of the proposed model is verified by comparison with general transmission network planning model. Furthermore, the results demonstrate that the joint planning model can gain more economic benefits through setting up different cases.

  5. Exploring Tradeoffs in Demand-Side and Supply-Side Management of Urban Water Resources Using Agent-Based Modeling and Evolutionary Computation

    Directory of Open Access Journals (Sweden)

    Lufthansa Kanta

    2015-11-01

    Full Text Available Urban water supply systems may be managed through supply-side and demand-side strategies, which focus on water source expansion and demand reductions, respectively. Supply-side strategies bear infrastructure and energy costs, while demand-side strategies bear costs of implementation and inconvenience to consumers. To evaluate the performance of demand-side strategies, the participation and water use adaptations of consumers should be simulated. In this study, a Complex Adaptive Systems (CAS framework is developed to simulate consumer agents that change their consumption to affect the withdrawal from the water supply system, which, in turn influences operational policies and long-term resource planning. Agent-based models are encoded to represent consumers and a policy maker agent and are coupled with water resources system simulation models. The CAS framework is coupled with an evolutionary computation-based multi-objective methodology to explore tradeoffs in cost, inconvenience to consumers, and environmental impacts for both supply-side and demand-side strategies. Decisions are identified to specify storage levels in a reservoir that trigger: (1 increases in the volume of water pumped through inter-basin transfers from an external reservoir; and (2 drought stages, which restrict the volume of water that is allowed for residential outdoor uses. The proposed methodology is demonstrated for Arlington, Texas, water supply system to identify non-dominated strategies for an historic drought decade. Results demonstrate that pumping costs associated with maximizing environmental reliability exceed pumping costs associated with minimizing restrictions on consumer water use.

  6. Demand-side management project for Tenaga Nasional Berhad. Energy efficiency guidelines. Progress report No. 3. Volume 1. Final report. Export trade information

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-05-01

    This study, conducted by the California Energy Commission, was funded by the U.S. Trade and Development Agency. The report summarizes a demand-side management study performed for the Tenaga Nasional Berhad Headquarters Building. The purpose of the study was to identify and evaluate demand side management measures (DSMs) that would reduce energy costs of the facility. Volume 1 is divided into the following sections: (1.0) Executive Summary; (2.0) Facility Background; (3.0) Ventilating and Air Conditioning Systems Description; (4.0) Lightning System Description; Figures, Tables, and Appendices.

  7. Methodology for the analysis and characterization of the demand side energy resources; Metodologia para analise e caracterizacao dos recursos energeticos do lado da demanda

    Energy Technology Data Exchange (ETDEWEB)

    Baitelo, Ricardo Lacerda; Udaeta, Miguel Edgar Morales [Universidade de Sao Paulo (USP), SP (Brazil). Dept. de Energia e Automacao Eletricas. Grupo de Energia; Burani, Geraldo Francisco; Grimoni, Jose Aquiles Baesso [Universidade de Sao Paulo (USP), SP (Brazil). Inst. de Energia e Eletrotecnica

    2006-07-01

    This abstract aims at describing briefly a model for the assessment of demand side energy resources This model intends to comprehend every kind of action and measure related to demand side management and energy conservation, evaluating them in a holistic way, into four dimensions: technical-economical, environmental, social and political. Different aspects regarding the resources are also accounted, such as energetic potentials (theoretical, accomplishable and economic). At last, scenarios concerning the introduction of evaluated resources through a period of time are elaborated. (author)

  8. Measuring Money Demand Function in Pakistan

    OpenAIRE

    Hassan, Shahid; Ali, Umbreen; Dawood, Mamoon

    2016-01-01

    This study investigates the factors such as interest rate, GDP per capita, exchange rate, fiscal deficit, urban and rural population to determine money demand function for Pakistan over the period from 1972-2013. We use ARDL Bound Testing approach in order to test long run relation between money demand and its factors whereas both long and short run coefficients will be found using similar approach. The results show that real interest rate exerts significant and negative effect upon money dem...

  9. Impact of realistic communications for fast-acting demand side management

    DEFF Research Database (Denmark)

    Dambrauskas, Paulius; Syed, Mazheruddin H.; Blair, Steven M.

    2017-01-01

    The rising penetration of intermittent energy resources is increasing the need for more diverse electrical energy resources that are able to support ancillary services. Demand side management (DSM) has a significant potential to fulfil this role, but several challenges are still impeding the wide......-scale integration of DSM. One of the major challenges is ensuring the performance of the networks that enable communications between control centres and the end DSM resources. This study presents an analysis of all communications networks that typically participate in the activation of DSM, and provides an estimate...... for the overall latency that these networks incur. The most significant sources of delay from each of the components of the communications network are identified which allows the most critical aspects to be determined. This analysis, therefore, offers a detailed evaluation of the performance of DSM resources...

  10. Why strategic pricing is the most powerful DSM [demand-side management] tool

    International Nuclear Information System (INIS)

    LeBlanc, W.

    1990-01-01

    Strategic pricing has long been under-utilized as a strategic tool by the electric utility industry. Ways by which utility, customer and regulatory interests can and should overlap with reference to strategic planning, and how the electric industry could enhance its ability to continue providing premier energy services to its customers and society are examined. Strategic pricing in the airline, banking, automobile and telephone industries are examined and compared. Strategic pricing can help utilities segment markets to improve service value, define products, create customer incentives to purchase/consume desirable goods and services, and signal competitors. Each of these benefits is illustrated with an example that closely integrates strategic pricing with demand-side management. Pricing strategically takes many steps, but can be broken down into: meet common challenges of business and marketing objectives; gain regulatory acceptance; and energize the organization to accept, adopt and implement strategic pricing

  11. Communications technologies for demand side management, DSM, and European utility communications architecture, EurUCA

    Energy Technology Data Exchange (ETDEWEB)

    Kaerkkaeinen, S.; Kekkonen, V. [VTT Energy, Espoo (Finland); Rissanen, P. [Tietosavo Oy (Finland)

    1996-12-31

    In this project the main target is to develop and assess methods for DSM (Demand Side Management) and distribution automation planning from the utility`s point of view. The final goal is to integrate these methods for the strategic planning of electric utilities. In practice the project is divided into four main parts: The development and assessment of DSM/IRP planning methods and cost/benefit analysis as a part of international co-operation (IEA DSM Agreement: Annex IV, European Cost/Benefit analysis of DSM, EUBC, and Finnish SAVE-project started in 1995 in co-operation with SRC International and six electric utilities in Finland); Development of PC-based DSM planning and assessment tools at VTT; Development of a decision support system of distribution network planning including DSM options at Tietosavo Oy and Integration of DSM planning and network planning tools in co-operation with VTT Energy and Tietosavo Oy

  12. Employee retention and integrated disability management practices as demand side factors.

    Science.gov (United States)

    Habeck, Rochelle; Hunt, Allan; Rachel, Colleen Head; Kregel, John; Chan, Fong

    2010-12-01

    Demand-side employment research on company policies and practices related to retention and absence and disability management (ADM) can contribute to our understanding of employment issues related to people with disabilities from the employers' perspective. To examine company ADM and retention practices and their effectiveness, as well as how these company policies and practices might influence hiring of people with disabilities. Disability Management Employer Coalition employer members (N = 650) were surveyed by internet and the survey data were analyzed using descriptive statistics, correlation, and multiple regression. Ninety-five participants responded to the survey resulting in a response rate of 14%. Retention practice was found to be associated with retention effectiveness (r = .39, P ideas and involvement of employees, and assuring they know how their work and performance support the mission. ADM practice was related to improving health and managing health conditions (r = .26, P companies.

  13. An Overview of Demand Side Management Control Schemes for Buildings in Smart Grids

    DEFF Research Database (Denmark)

    Kosek, Anna Magdalena; Costanzo, Giuseppe Tommaso; Bindner, Henrik W.

    2013-01-01

    The increasing share of distributed energy resources and renewable energy in power systems results in a highly variable and less controllable energy production. Therefore, in order to ensure stability and to reduce the infrastructure and operation cost of the power grid, flexible and controllable...... of the power sector in mind and thus can differ significantly in their architecture, their integration into the various markets, their integration into distribution network operation and several other aspects. This paper proposes a classification of load control policies for demand side management in smart...... buildings, based on external behavior: direct, indirect, transactional and autonomous control; internal operation: decision support system scope, control strategy, failure handling and architecture. This classification assists in providing an overview of the control schemes as well as different ways...

  14. An Enhanced System Architecture for Optimized Demand Side Management in Smart Grid

    Directory of Open Access Journals (Sweden)

    Anzar Mahmood

    2016-04-01

    Full Text Available Demand Side Management (DSM through optimization of home energy consumption in the smart grid environment is now one of the well-known research areas. Appliance scheduling has been done through many different algorithms to reduce peak load and, consequently, the Peak to Average Ratio (PAR. This paper presents a Comprehensive Home Energy Management Architecture (CHEMA with integration of multiple appliance scheduling options and enhanced load categorization in a smart grid environment. The CHEMA model consists of six layers and has been modeled in Simulink with an embedded MATLAB code. A single Knapsack optimization technique is used for scheduling and four different cases of cost reduction are modeled at the second layer of CHEMA. Fault identification and electricity theft control have also been added in CHEMA. Furthermore, carbon footprint calculations have been incorporated in order to make the users aware of environmental concerns. Simulation results prove the effectiveness of the proposed model.

  15. Multicriteria evaluation of demand side management (DSM) implementation strategies in the Indian power sector

    Energy Technology Data Exchange (ETDEWEB)

    Vashishtha, Sanjay [Centre for Renewable Energy and Environmental Development (CREED), BITS, Pilani, Rajasthan 333031 (India); Ramachandran, M. [BITS Pilani Dubai Centre, Dubai (United Arab Emirates)

    2006-09-15

    In recent years, demand side management (DSM) has emerged as an efficient utility planning strategy for reducing capacity shortages and improving system load factors. The Indian government is adopting various policies to implement DSM programs. DSM implementation involves a variety of interests with conflicting objectives, and a range of possible implementation strategies with varying implications for effectiveness, cost, feasibility, efficiency and stakeholder acceptance. This necessitates a critical comparison of the strategies to determine a preferred strategy or combination of strategies from each specific stakeholder's point of view. The present study evaluates DSM implementation strategies from a multiobjective perspective using the Analytic Hierarchy Process (AHP). Eight strategies and six criteria were considered. Forty utility, regulator, and consumer stakeholders were surveyed. The most highly ranked strategies involved creating dedicated funds and providing technical support to end users for effective implementation of DSM. (author)

  16. Communications technologies for demand side management, DSM, and European utility communications architecture, EurUCA

    Energy Technology Data Exchange (ETDEWEB)

    Kaerkkaeinen, S; Kekkonen, V [VTT Energy, Espoo (Finland); Rissanen, P [Tietosavo Oy (Finland)

    1997-12-31

    In this project the main target is to develop and assess methods for DSM (Demand Side Management) and distribution automation planning from the utility`s point of view. The final goal is to integrate these methods for the strategic planning of electric utilities. In practice the project is divided into four main parts: The development and assessment of DSM/IRP planning methods and cost/benefit analysis as a part of international co-operation (IEA DSM Agreement: Annex IV, European Cost/Benefit analysis of DSM, EUBC, and Finnish SAVE-project started in 1995 in co-operation with SRC International and six electric utilities in Finland); Development of PC-based DSM planning and assessment tools at VTT; Development of a decision support system of distribution network planning including DSM options at Tietosavo Oy and Integration of DSM planning and network planning tools in co-operation with VTT Energy and Tietosavo Oy

  17. Incentive-compatible demand-side management for smart grids based on review strategies

    Science.gov (United States)

    Xu, Jie; van der Schaar, Mihaela

    2015-12-01

    Demand-side load management is able to significantly improve the energy efficiency of smart grids. Since the electricity production cost depends on the aggregate energy usage of multiple consumers, an important incentive problem emerges: self-interested consumers want to increase their own utilities by consuming more than the socially optimal amount of energy during peak hours since the increased cost is shared among the entire set of consumers. To incentivize self-interested consumers to take the socially optimal scheduling actions, we design a new class of protocols based on review strategies. These strategies work as follows: first, a review stage takes place in which a statistical test is performed based on the daily prices of the previous billing cycle to determine whether or not the other consumers schedule their electricity loads in a socially optimal way. If the test fails, the consumers trigger a punishment phase in which, for a certain time, they adjust their energy scheduling in such a way that everybody in the consumer set is punished due to an increased price. Using a carefully designed protocol based on such review strategies, consumers then have incentives to take the socially optimal load scheduling to avoid entering this punishment phase. We rigorously characterize the impact of deploying protocols based on review strategies on the system's as well as the users' performance and determine the optimal design (optimal billing cycle, punishment length, etc.) for various smart grid deployment scenarios. Even though this paper considers a simplified smart grid model, our analysis provides important and useful insights for designing incentive-compatible demand-side management schemes based on aggregate energy usage information in a variety of practical scenarios.

  18. Managing Sustainable Demand-side Infrastructure for Power System Ancillary Services

    Science.gov (United States)

    Parkinson, Simon Christopher

    Widespread access to renewable electricity is seen as a viable method to mitigate carbon emissions, although problematic are the issues associated with the integration of the generation systems within current power system configurations. Wind power plants are the primary large-scale renewable generation technology applied globally, but display considerable short-term supply variability that is difficult to predict. Power systems are currently not designed to operate under these conditions, and results in the need to increase operating reserve in order to guarantee stability. Often, operating conventional generation as reserve is both technically and economically inefficient, which can overshadow positive benefits associated with renewable energy exploitation. The purpose of this thesis is to introduce and assess an alternative method of enhancing power system operations through the control of electric loads. In particular, this thesis focuses on managing highly-distributed sustainable demand-side infrastructure, in the form of heat pumps, electric vehicles, and electrolyzers, as dispatchable short-term energy balancing resources. The main contribution of the thesis is an optimal control strategy capable of simultaneously balancing grid- and demand-side objectives. The viability of the load control strategy is assessed through model-based simulations that explicitly track end-use functionality of responsive devices within a power systems analysis typically implemented to observe the effects of integrated wind energy systems. Results indicate that there is great potential for the proposed method to displace the need for increased reserve capacity in systems considering a high penetration of wind energy, thereby allowing conventional generation to operate more efficiently and avoid the need for possible capacity expansions.

  19. A Virtual Power Plant Architecture for the Demand-Side Management of Smart Prosumers

    Directory of Open Access Journals (Sweden)

    Marco Pasetti

    2018-03-01

    Full Text Available In this paper, we present a conceptual study on a Virtual Power Plant (VPP architecture for the optimal management of Distributed Energy Resources (DERs owned by prosumers participating in Demand-Side Management (DSM programs. Compared to classical VPP architectures, which aim to aggregate several DERs dispersed throughout the electrical grid, in the proposed VPP architecture the supervised physical domain is limited to single users, i.e., to single Points of Delivery (PODs of the distribution network. The VPP architecture is based on a service-oriented approach, where multiple agents cooperate to implement the optimal management of the prosumer’s assets, by also considering different forms of Demand Response (DR requests. The considered DR schemes range from Price-Based DRs to Event-Based DRs, covering both the normal operating functions and the emergency control requests applied in modern distribution networks. With respect to centralized approaches, in this study the control perspective is moved from the system level to the single prosumer’s level, who is allowed to independently provide flexible power profiles through the aggregation of multiple DERs. A generalized optimization model, formulated as a Mixed-Integer Linear Programming (MILP problem, is also introduced. Such a model is able to compute the optimal scheduling of a prosumer’s assets by considering both DR requests and end-users’ requirements in terms of comfort levels while minimizing the costs.

  20. Demand side management—A simulation of household behavior under variable prices

    International Nuclear Information System (INIS)

    Gottwalt, Sebastian; Ketter, Wolfgang; Block, Carsten; Collins, John; Weinhardt, Christof

    2011-01-01

    Within the next years, consumer households will be increasingly equipped with smart metering and intelligent appliances. These technologies are the basis for households to better monitor electricity consumption and to actively control loads in private homes. Demand side management (DSM) can be adopted to private households. We present a simulation model that generates household load profiles under flat tariffs and simulates changes in these profiles when households are equipped with smart appliances and face time-based electricity prices. We investigate the impact of smart appliances and variable prices on electricity bills of a household. We show that for households the savings from equipping them with smart appliances are moderate compared to the required investment. This finding is quite robust with respect to variation of tariff price spreads and to different types of appliance utilization patterns. Finally, our results indicate that electric utilities may face new demand peaks when day-ahead hourly prices are applied. However, a considerable amount of residential load is available for shifting, which is interesting for the utilities to balance demand and supply. - Highlights: ► Our model generates residential load profiles that are based on real world data. ► We simulate changes in load profiles when smart appliances and time-of-use tariffs are applied. ► The economic incentive for households to invest in smart appliances is low. ► Time-of-use tariffs create new, even higher peaks. ► Electric utilities have a large amount of the hourly load available for shifting.

  1. Demand Side Management in an Integrated Electricity Market: What are the Impacts on Generation and Environmental Concerns?

    International Nuclear Information System (INIS)

    Bergaentzle, Claire; Clastres, Cedric

    2013-05-01

    Smart Grid technology appears necessary to succeed in activating the demand through demand side management (DSM) programs. This would in turn improve energy efficiency and achieve environmental targets through controlled consumption. The many pilot projects led worldwide involving smart grids technology, brought quantitative evaluations of DSM measures on electricity load. Efficient DSM instruments must be fine-tuned to respond to very specific issues arising from the generation mix, the integration of intermittent energies or the level of outage risks faced during peak period. Efficient DSM strategies are illustrated through a model involving five countries that carry these different features and under the assumptions of isolated and fully interconnected markets. This paper aims at bringing recommendations regarding the instruments that should be implemented to maximize the benefits of smart grids technology and demand response. Finally, it tends to emphasis the issue of homogenized energy efficiency policies, critical in the building of internal energy markets such as the one the European Union is envisioning. (authors)

  2. DEVELOPMENT OF THE E-GOVERNMENT MARKET IN THE EUROPEAN UNION: AN ANALYSIS OF THE SUPPLY VERSUS DEMAND SIDES

    Directory of Open Access Journals (Sweden)

    Veghes Calin

    2011-07-01

    Full Text Available E-government represents one of the most palpable results of the dynamic development of the information and communication technology. Defined mostly as an intensive use of information technologies to provide public services, e-government has been approached in the literature rather from a technological perspective, with a significant importance given to the supply and a lower attention paid to the demand side. The increasing interest in taking into consideration the demand side in the development of the e-government initiatives and projects has created the foundation for a shift in the way the conceptual framework for e-government planning and implementation is defined, from the technology infrastructure and costs to the customer-centric character of all the efforts done. The European Union put e-government on its agenda aiming to improve access to the public information and services, increase transparency of public administration, exploit effectively the information technology within public administration, and establishing e-procurement. The development of the e-government services in the Member States, as it is expressed by the data regarding the supply and demand side, has been conducted in a more or less different manner that led, at the Unions level, to a relatively high availability but a rather low usage of the specific services. The paper explores the relationship between the e-government supply and demand based on the secondary data referring to the public services available to the citizens (as these are defined by the Eurostat methodology and the usage of these services by the individuals, integrating them through an analytical matrix inspired by the BCG model. Probably the most important conclusion of this analysis states that development of the e-government services has not been accompanied by measures meant to stimulate their usage in the most of the European Union Member States. The analytical matrix allowed also the identification

  3. Measuring side effects after radiotherapy for pharynx cancer

    DEFF Research Database (Denmark)

    Jensen, Kenneth

    2007-01-01

    Data on side effects after radiotherapy is needed to establish the benefits and drawbacks of new treatments, but side effects are not quantified as easily as survival or local control. Side effects may be quantified using physical measures. Unfortunately, only few endpoints exist where a physical...... measure is obtainable, and the case of a patient-relevant measure is even rarer. Radiotherapy is often followed by complex symptoms not easily quantifiable by the observer. Quantitative patient reported side effects can be retrieved using validated questionnaires, but this kind of data is often difficult...... to interpret and the correlation with clinically observable or measurable changes not straightforward. The exploitation of the possibilities of highly conformal radiotherapy and multimodality treatment depends on a better understanding of the correlation between dose, volume, modifying factors, and side...

  4. Domestic demand-side management (DSM): Role of heat pumps and thermal energy storage (TES) systems

    International Nuclear Information System (INIS)

    Arteconi, A.; Hewitt, N.J.; Polonara, F.

    2013-01-01

    Heat pumps are seen as a promising technology for load management in the built environment, in combination with the smart grid concept. They can be coupled with thermal energy storage (TES) systems to shift electrical loads from high-peak to off-peak hours, thus serving as a powerful tool in demand-side management (DSM). This paper analyzes heat pumps with radiators or underfloor heating distribution systems coupled with TES with a view to showing how a heat pump system behaves and how it influences the building occupants' thermal comfort under a DSM strategy designed to flatten the shape of the electricity load curve by switching off the heat pump during peak hours (16:00–19:00). The reference scenario for the analysis was Northern Ireland (UK). The results showed that the heat pump is a good tool for the purposes of DSM, also thanks to the use of TES systems, in particular with heating distribution systems that have a low thermal inertia, e.g. radiators. It proved possible to achieve a good control of the indoor temperature, even if the heat pump was turned off for 3 h, and to reduce the electricity bill if a “time of use” tariff structure was adopted. -- Highlights: ► Heat pump heating systems with thermal energy storage are considered. ► System behavior is investigated during a DSM strategy for reducing peak energy demand. ► Heat pump heating systems demonstrate to be able to have an active role in DSM programs. ► A TES system must be coupled with the heat pump in presence of low thermal inertia heating distribution systems. ► Central role played by incentives schemes to promote this technology

  5. The Problems of Estonian R&D and Innovation Strategy and the Demand-Side Innovation Policies

    Directory of Open Access Journals (Sweden)

    Tõnu Roolaht

    2012-12-01

    Full Text Available The second larger Estonian R&D and Innovation Strategy ‘Knowledge-based Estonia 2007-2013’ is aimed at continuing the advancement of research and development efforts towards an innovative knowledge-based society and economic system in Estonia. Fostering of knowledge-based high-tech industries is seen as paramount for retaining country’s competitive advantage. However, the mid-term evaluations indicate that several goals of the strategy might not be achievable by 2013. In fact, the policy measures have been much more successful in developing scientific research, as indicated by increased international publication, number of patents, and number of researchers and engineers. The advances in development of high-tech products and services through innovations are noticeable but less prominent. The purpose of this study is to suggest the role for demand-side innovation policies in helping to advance commercial development and innovation

  6. Measuring the security of energy exports demand in OPEC economies

    International Nuclear Information System (INIS)

    Dike, Jude Chukwudi

    2013-01-01

    One of the objectives of OPEC is the security of demand for the crude oil exports of its members. Achieving this objective is imperative with the projected decline in OECD countries' crude oil demand among other crude oil demand shocks. This paper focuses on determining the external crude oil demand security risks of OPEC member states. In assessing these risks, this study introduces two indexes. The first index, Risky Energy Exports Demand (REED), indicates the level of energy export demand security risks for OPEC members. It combines measures of export dependence, economic dependence, monopsony risk and transportation risk. The second index, Contribution to OPEC Risk Exposure (CORE), indicates the individual contribution of the OPEC members to OPEC's risk exposure. This study utilises the disaggregated index approach in measuring energy demand security risks for crude oil and natural gas and involves a country level analysis. With the disaggregated approach, the study shows that OPEC's energy export demand security risks differ across countries and energy types. - Highlights: • REED and CORE indexes are suitable measures for energy exports demand security risk. • The indexes show that energy demand security risk is different for each OPEC country. • The countries contribution to OPEC's energy demand security risk is also different. • The outcome is necessary for OPEC's common energy and climate change policies. • The outcome makes a case for oil demand security as a topical issue in the literature

  7. Exploring Community-Oriented Approaches in Demand Side Management Projects in Europe

    Directory of Open Access Journals (Sweden)

    Anna Mengolini

    2016-12-01

    Full Text Available This paper seeks to investigate if the theoretical and political trends towards a more collective dimension of energy use are reflected in the design and development of demand side management (DSM pilot projects in Europe. Specifically, the paper analyses DSM projects in the database of the Joint Research Centre (JRC of the European Commission to capture signs of a new attention towards the wider context in which consumers live and towards the social dimension associated with energy consumption. To this end, the paper investigates the projects’ scope (in terms of project’s partners, end-use sectors and targeted services as well as the consumer engagement strategies that projects use. These elements reflect the projects’ consideration for the socio-economic dimension of the community where the pilots take place and their inclination to build on community dynamics. The analysis shows that DSM projects in the EU are increasingly being designed and developed with a collegial approach to energy consumption in mind, although an integrated approach is still missing. In addition, research is still needed to link the use of this innovative approach to project results. A closer look at the developments and results of these projects can help to identify what works and what doesn’t in real life experiences, thus supporting effective policy making at the EU and national level.

  8. Can demand-side policies stop the tobacco industry's damage? Lessons from Turkey.

    Science.gov (United States)

    Gultekin-Karakas, Derya

    2015-01-01

    Trade and investment liberalisation in the post-1980 period allowed the penetration of transnational tobacco companies into the Turkish market. State control over the market was gradually removed and tobacco farming, manufacturing, trade and consumption were reshaped in line with the needs of transnational tobacco companies. The resultant increase in product proliferation and aggressive marketing strategies led to a dramatic rise in cigarette consumption in the 1990s, making Turkey a market with one of the sharpest consumption increases in the world. While Turkey implemented demand-side tobacco control policies to reduce consumption after 1996, it continued to stimulate manufacturing and trade in a conflicting way. The Turkish case verifies that the liberalisation process facilitated by the state under the auspices of international institutions conflicts with tobacco control. Liberalisation paves the way for market expansions of transnational tobacco companies that resist tobacco control in their drive for profit. Current global tobacco control policies, with no interest in controlling manufacturing, have limited effect on consumption. The Turkish case indicates the necessity of establishing public control over tobacco manufacturing and trade from a public health perspective.

  9. Transactive Demand Side Management Programs in Smart Grids with High Penetration of EVs

    Directory of Open Access Journals (Sweden)

    Poria Hasanpor Divshali

    2017-10-01

    Full Text Available Due to environmental concerns, economic issues, and emerging new loads, such as electrical vehicles (EVs, the importance of demand side management (DSM programs has increased in recent years. DSM programs using a dynamic real-time pricing (RTP method can help to adaptively control the electricity consumption. However, the existing RTP methods, particularly when they consider the EVs and the power system constraints, have many limitations, such as computational complexity and the need for centralized control. Therefore, a new transactive DSM program is proposed in this paper using an imperfect competition model with high EV penetration levels. In particular, a heuristic two-stage iterative method, considering the influence of decisions made independently by customers to minimize their own costs, is developed to find the market equilibrium quickly in a distributed manner. Simulations in the IEEE 37-bus system with 1141 customers and 670 EVs are performed to demonstrate the effectiveness of the proposed method. The results show that the proposed method can better manage the EVs and elastic appliances than the existing methods in terms of power constraints and cost. Also, the proposed method can solve the optimization problem quick enough to run in real-time.

  10. The past, present, and future of U.S. utility demand-side management programs

    International Nuclear Information System (INIS)

    Eto, J.

    1996-12-01

    Demand-side management or DSM refers to active efforts by electric and gas utilities to modify customers' energy use patterns. The experience in the US shows that utilities, when provided with appropriate incentives, can provide a powerful stimulus to energy efficiency in the private sector. This paper describes the range and history of DSM programs offered by US electric utilities, with a focus on the political, economic, and regulatory events that have shaped their evolution. It also describes the changes these programs are undergoing as a result of US electricity industry restructuring. DSM programs began modestly in the 1970s in response to growing concerns about dependence on foreign sources of oil and environmental consequences of electricity generation, especially nuclear power. The foundation for the unique US partnership between government and utility interests can be traced first to the private-ownership structure of the vertically integrated electricity industry and second to the monopoly franchise granted by state regulators. Electricity industry restructuring calls into question both of these basic conditions, and thus the future of utility DSM programs for the public interest. Future policies guiding ratepayer-funded energy-efficiency DSM programs will need to pay close attention to the specific market objectives of the programs and to the balance between public and private interests

  11. A Hybrid Genetic Wind Driven Heuristic Optimization Algorithm for Demand Side Management in Smart Grid

    Directory of Open Access Journals (Sweden)

    Nadeem Javaid

    2017-03-01

    Full Text Available In recent years, demand side management (DSM techniques have been designed for residential, industrial and commercial sectors. These techniques are very effective in flattening the load profile of customers in grid area networks. In this paper, a heuristic algorithms-based energy management controller is designed for a residential area in a smart grid. In essence, five heuristic algorithms (the genetic algorithm (GA, the binary particle swarm optimization (BPSO algorithm, the bacterial foraging optimization algorithm (BFOA, the wind-driven optimization (WDO algorithm and our proposed hybrid genetic wind-driven (GWD algorithm are evaluated. These algorithms are used for scheduling residential loads between peak hours (PHs and off-peak hours (OPHs in a real-time pricing (RTP environment while maximizing user comfort (UC and minimizing both electricity cost and the peak to average ratio (PAR. Moreover, these algorithms are tested in two scenarios: (i scheduling the load of a single home and (ii scheduling the load of multiple homes. Simulation results show that our proposed hybrid GWD algorithm performs better than the other heuristic algorithms in terms of the selected performance metrics.

  12. Comparing the physical demands of friendly matches and small-sided games in semiprofessional soccer players.

    Science.gov (United States)

    Casamichana, David; Castellano, Julen; Castagna, Carlo

    2012-03-01

    This study compared the physical demands of friendly matches (FMs) and small-sided games (SGs) in semiprofessional soccer players by means of global positioning system technology. Twenty-seven semiprofessional soccer players were monitored during 7 FMs and 9 sessions involving different SGs. Their physical profile was described on the basis of 20 variables related to distances and frequencies at different running speeds, the number of accelerations, and through global indicators of workload such as the work:rest ratio, player workload, and the exertion index. Results showed significant differences (p FM); the distribution of the distance covered in the speed zones 7.0-12.9 km·h(-1) (SG > FM) and >21 km·h(-1) (FM > SG); the distribution of time spent in certain speed zones (FM > SG: 0.0-6.9 and >21 km·h(-1); FM > SG: 7.0-12.9 km·h(-1)). More sprints per hour of play were performed during FMs, with greater mean durations and distances, greater maximum durations and distances, and a greater frequency per hour of play for sprints of 10-40 and >40 m (p < 0.01). The frequency of repeated high-intensity efforts was higher during FM (p < 0.01). The results show that coaches and strength and conditioning professionals should consider FMs during their training routine to foster specific adaptations in the domain of high-intensity effort.

  13. Electric power market liberalization and demand-side management (DSM); Denryoku shijo jiyuka to DSM

    Energy Technology Data Exchange (ETDEWEB)

    Yajima, M. [Central Research Institute of Electric Power Industry, Tokyo (Japan)

    1997-01-30

    This paper explains effects of market liberalization which will lead to introducing competition in electric power business on demand-side management (DSM), by quoting examples mainly in the United States. The paper also describes the future outlook thereon. The DSM program in the United States has expanded for the period between 1989 through 1994. However, during the last few years, the movements of electric power market liberalization have come to force electric power business entities to change their management strategies and reduction in expense. This situation has resulted in reduction in the DSM budget. Future DSM programs are thought to diversify into the following types: a program such as load management which has effect of reducing expenses and investments in investment time periods of 5 to 10 years, a program effective for users such as high-efficiency motors which have effects of reducing expenses and improving efficiency in investment time periods of 3 to 5 years, a program which will be effective enough if market barriers are removed after the market conversions, but requires subsidies and purchase guarantees, and a social program intended for environmental effects and low-income users. 4 refs., 1 tab.

  14. Energy Refurbishment of an Office Building with Hybrid Photovoltaic System and Demand-Side Management

    Directory of Open Access Journals (Sweden)

    Giovani Almeida Dávi

    2017-08-01

    Full Text Available On-site photovoltaic (PV and battery systems intend to improve buildings energy performance, however battery costs and monetary incentives are a major drawback for the introduction of these technologies into the electricity grids. This paper proposes an energy refurbishment of an office building based on multi-objective simulations. An innovative demand-side management approach is analyzed through the PV and battery control with the purpose of reducing grid power peaks and grid imported energy, as well as improving the project economy. Optimization results of load matching and grid interaction parameters, complemented with an economic analysis, are investigated in different scenarios. By means of battery use, the equivalent use of the grid connection is reduced by 12%, enhancing the grid interaction potential, and 10% of load matching rates can be increased. Project improvements indicate the grid connection capacity can be reduced by 13% and significant savings of up to 48% are achieved on yearly bills. The economy demonstrates the grid parity is only achieved for battery costs below 100 €/kWh and the payback period is large: 28 years. In the case with only PV system, the grid parity achieves better outcomes and the payback time is reduced by a half, making this a more attractive option.

  15. The past, present, and future of U.S. utility demand-side management programs

    Energy Technology Data Exchange (ETDEWEB)

    Eto, J. [Lawrence Berkeley National Lab., CA (United States). Environmental Energy Technologies Div.

    1996-12-01

    Demand-side management or DSM refers to active efforts by electric and gas utilities to modify customers` energy use patterns. The experience in the US shows that utilities, when provided with appropriate incentives, can provide a powerful stimulus to energy efficiency in the private sector. This paper describes the range and history of DSM programs offered by US electric utilities, with a focus on the political, economic, and regulatory events that have shaped their evolution. It also describes the changes these programs are undergoing as a result of US electricity industry restructuring. DSM programs began modestly in the 1970s in response to growing concerns about dependence on foreign sources of oil and environmental consequences of electricity generation, especially nuclear power. The foundation for the unique US partnership between government and utility interests can be traced first to the private-ownership structure of the vertically integrated electricity industry and second to the monopoly franchise granted by state regulators. Electricity industry restructuring calls into question both of these basic conditions, and thus the future of utility DSM programs for the public interest. Future policies guiding ratepayer-funded energy-efficiency DSM programs will need to pay close attention to the specific market objectives of the programs and to the balance between public and private interests.

  16. Albedo and vegetation demand-side management options for warm climates

    International Nuclear Information System (INIS)

    Hall, Darwin C.

    1997-01-01

    For electric utilities, demand-side management (DSM) can reduce electric load and shift load from peak to off-peak periods. In general, the investor in DSM collects the reward with lower electric bills, excepting a positive externality because of reduced tropospheric and stratospheric air pollution from fossil fuel power plants. In warm climates, DSM options include increasing albedo and vegetation, respectively, by painting surfaces white and planting trees; these DSM options are distinguished from all other DSM options because of ecosystem effects. Ambient temperature falls, mitigating the urban 'heat island', which reduces electric load and ozone formation. The investor in albedo and vegetation DSM options does not collect all of the reward from lower electric bills, since the lower ambient temperature provides savings to all customers who use electricity for air conditioning and refrigeration. Similar to other DSM options, air pollution is also reduced as a result of lower power plant emissions. Complex airshed models and electric utility system dispatch models are applied in this paper to account for some of these ecosystem effects. Unaccounted ecosystem effects remain, stymieing cost effectiveness analysis

  17. The energy efficiency and demand side management programs as implemented by the energy efficiency division of the department of energy

    International Nuclear Information System (INIS)

    Anunciacion, Jesus C.

    1997-01-01

    The thrust of the Philippine energy sector. specifically the government side, is to involve the active participation of not only all the government agencies involved in energy activities but the private sector as well. This participation shall mean technical and financial participation, directly and indirectly. The Department of Energy is on the process involving the continuing update and development of a Philippine Energy Plan (PEP) which has a 30-year time scope, which will help the country monitor and determine energy supply and demand vis-a-vis the growing demands of an industrializing country like the Philippines. Among the most vital component of the PEP is the thrust to pursue national programs for energy efficiency and demand-side management. Seven energy efficiency sub-programs have been identified for implementation, with a target savings of 623 million barrels of fuel oil equivalent (MMBFOE). A cumulative net savings of 237 billion pesos shall be generated against a total investment cost of 54.5 billion pesos. The Philippine energy sector will continue to develop and implement strategies to promote the efficient utilization of energy which will cover all aspects of the energy industry. The plan is focussed on the training and education of the various sectors on the aspects involved in the implementation of energy efficiency and demand-side management elements on a more aggressive note. The implementation of technical strategies by the department will continue on a higher and more extensive level, these are: energy utilization monitoring, consultancy and engineering services, energy efficiency testing and labelling program, and demand-side management programs for each sector. In summary, the PEP, as anchored in energy efficiency and demand-side management tools, among others, will ensure a continuous energy supply at affordable prices while incorporating environmental and social considerations. (author)

  18. Demonstrating a small utility approach to demand-side program implementation

    Energy Technology Data Exchange (ETDEWEB)

    1991-10-01

    The US DOE awarded a grant to the Burlington Electric Department (B.E.D.) to test a demand-side management (DSM) demonstration program designed to quickly save a significant amount of power with little disruption to the utility's customers or its normal operations. B.E.D. is a small municipal utility located in northern Vermont, with a lengthy history of successful DSM involvement. In our grant application, we proposed to develop a replicable program and approach to DSM that might be useful to other small utilities and to write a report to enable such replication. We believe that this DSM program and/or individual program components are replicable. This report is designed to allow other utilities interested in DSM to replicate this program or specific program design features to meet their DSM goals. We also wanted to use the opportunity of this grant to test the waters of residential heating fuel-switching. We hoped to test the application of one fuel-switching technology, and to benefit from the lessons learned in developing a full-scale DSM program for this end- use. To this end the pilot effort has been very successful. In the pilot pressure we installed direct-vent gas fired space heaters sized as supplemental heating units in 44 residences heated solely by electric resistance heat. We installed the gas space heating units at no cost to the owners or residents. We surveyed participating customers. The results of those surveys are included in this report and preliminary estimates of winter peak capacity load reductions are also noted in this report.

  19. On the Mobile Communication Requirements for the Demand-Side Management of Electric Vehicles

    Directory of Open Access Journals (Sweden)

    Stefano Rinaldi

    2018-05-01

    Full Text Available The rising concerns about global warming and environmental pollution are increasingly pushing towards the replacement of road vehicles powered by Internal Combustion Engines (ICEs. Electric Vehicles (EVs are generally considered the best candidates for this transition, however, existing power grids and EV management systems are not yet ready for a large penetration of EVs, and the current opinion of the scientific community is that further research must be done in this field. The so-called Vehicle-to-Grid (V2G concept plays a relevant role in this scenario by providing the communication capabilities required by advanced control and Demand-Side Management (DSM strategies. Following this research trend, in this paper the communication requirements for the DSM of EVs in urban environments are discussed, by focusing on the mobile communication among EVs and smart grids. A specific system architecture for the DSM of EVs moving inside urban areas is proposed and discussed in terms of the required data throughput. In addition, the use of a Low-Power Wide-Area Network (LPWAN solution—the Long-Range Wide Area Network (LoRaWAN technology—is proposed as a possible alternative to cellular-like solutions, by testing an experimental communication infrastructure in a real environment. The results show that the proposed LPWAN technology is capable to handle an adequate amount of information for the considered application, and that one LoRa base station is able to serve up to 438 EVs per cell, and 1408 EV charging points.

  20. Demonstrating a small utility approach to demand-side program implementation

    International Nuclear Information System (INIS)

    1991-01-01

    The US DOE awarded a grant to the Burlington Electric Department (B.E.D.) to test a demand-side management (DSM) demonstration program designed to quickly save a significant amount of power with little disruption to the utility's customers or its normal operations. B.E.D. is a small municipal utility located in northern Vermont, with a lengthy history of successful DSM involvement. In our grant application, we proposed to develop a replicable program and approach to DSM that might be useful to other small utilities and to write a report to enable such replication. We believe that this DSM program and/or individual program components are replicable. This report is designed to allow other utilities interested in DSM to replicate this program or specific program design features to meet their DSM goals. We also wanted to use the opportunity of this grant to test the waters of residential heating fuel-switching. We hoped to test the application of one fuel-switching technology, and to benefit from the lessons learned in developing a full-scale DSM program for this end- use. To this end the pilot effort has been very successful. In the pilot pressure we installed direct-vent gas fired space heaters sized as supplemental heating units in 44 residences heated solely by electric resistance heat. We installed the gas space heating units at no cost to the owners or residents. We surveyed participating customers. The results of those surveys are included in this report and preliminary estimates of winter peak capacity load reductions are also noted in this report

  1. Demand Side Management in a competitive European market: Who should be responsible for its implementation?

    International Nuclear Information System (INIS)

    Didden, Marcel H.; D'Haeseleer, William D.

    2003-01-01

    Demand side management (DSM), more specifically energy efficiency, is standing in the spotlight due to the Kyoto commitments. An additional factor, the liberalization of the electricity markets, causes every country to review its own DSM activities. Especially in Europe, where the directive for opening the electricity market has a direct impact on the current DSM frameworks, governments will have to consider a change in this framework. In order to achieve this, much research has been done in the past years on how to change the DSM framework in a way that the requirements of both liberalization and the Kyoto Protocol will be met. In this paper, we review the current DSM activities and ongoing research from the starting point 'who should be responsible for implementing DSM'. We conclude that countries have to make explicit choices on how to arrange their DSM activities for the different customers groups. They have to be aware of the fact that some combinations of DSM activities will lead to counter-productive results and therefore inefficiency. This paper also investigates which of these DSM activities fits best in the open market; a critical review of Integrated Resource Planning (IRP) is used as a starting point. We agree with various proponents of IRP that planning towards minimal societal costs is theoretically appropriate, looking from a societal point of view. We also indicate in this paper that the planning process IRP is partly applicable in the open market. But looking at the practical application of IRP in the past, we must conclude that there are better alternatives for achieving energy efficient goals in a liberalized market

  2. Demand Side Management in Nearly Zero Energy Buildings Using Heuristic Optimizations

    Directory of Open Access Journals (Sweden)

    Nadeem Javaid

    2017-08-01

    Full Text Available Today’s buildings are responsible for about 40% of total energy consumption and 30–40% of carbon emissions, which are key concerns for the sustainable development of any society. The excessive usage of grid energy raises sustainability issues in the face of global changes, such as climate change, population, economic growths, etc. Traditionally, the power systems that deliver this commodity are fuel operated and lead towards high carbon emissions and global warming. To overcome these issues, the recent concept of the nearly zero energy building (nZEB has attracted numerous researchers and industry for the construction and management of the new generation buildings. In this regard, this paper proposes various demand side management (DSM programs using the genetic algorithm (GA, teaching learning-based optimization (TLBO, the enhanced differential evolution (EDE algorithm and the proposed enhanced differential teaching learning algorithm (EDTLA to manage energy and comfort, while taking the human preferences into consideration. Power consumption patterns of shiftable home appliances are modified in response to the real-time price signal in order to get monetary benefits. To further improve the cost and user discomfort objectives along with reduced carbon emission, renewable energy sources (RESs are also integrated into the microgrid (MG. The proposed model is implemented in a smart residential complex of multiple homes under a real-time pricing environment. We figure out two feasible regions: one for electricity cost and the other for user discomfort. The proposed model aims to deal with the stochastic nature of RESs while introducing the battery storage system (BSS. The main objectives of this paper include: (1 integration of RESs; (2 minimization of the electricity bill (cost and discomfort; and (3 minimizing the peak to average ratio (PAR and carbon emission. Additionally, we also analyze the tradeoff between two conflicting objectives

  3. DEMONSTRATION OF THE ENVIRONMENTAL AND DEMAND-SIDE MANAGEMENT BENEFITS OF GRID-CONNECTED PHOTOVOLTAIC POWER SYSTEMS

    Science.gov (United States)

    This study investigated the pollutant emission reduction and demand-side management potential of 16 photovoltaic (PV) systems installed across the U.S. in 1993 and 1994. The project was sponsored by the U.S. Environmental Protection Agency (EPA) and 11 electric utilities. This ar...

  4. Demand-Side Financing in Education: a Critical Examination of a Girls' Scholarship Program in Malawi--(Case Study)

    Science.gov (United States)

    Sineta, Abraham

    2012-01-01

    Despite the push for universal education, many disadvantaged and poor children in developing countries still do not have access to basic education. This among other reasons is due to poverty where poor families cannot afford the cost of basic education even when it is "free" of tuition (McDonald, 2007). Demand-side financing…

  5. Evaluation of flexible demand-side load-following reserves in power systems with high wind generation penetration

    NARCIS (Netherlands)

    Paterakis, N.G.; Catalao, J.P.S.; Ntomaris, A.V.; Erdinc, O.

    2015-01-01

    In this study, a two-stage stochastic programming joint energy and reserve day-ahead market structure is proposed in order to procure the required load-following reserves to tackle with wind power production uncertainty. Reserves can be procured both from generation and demand-side. Responsive

  6. Demand side management in South Africa at industrial residence water heating systems using in line water heating methodology

    International Nuclear Information System (INIS)

    Rankin, R.; Rousseau, P.G.

    2008-01-01

    The South African electrical utility, ESKOM, currently focuses its demand side management (DSM) initiatives on controlling electrical load between 18:00 and 20:00 each day, which is the utility's peak demand period. Funding is provided to energy service companies (ESCo's) to implement projects that can achieve load shifting out of this period. This paper describes how an improved in line water heating concept developed in previous studies was implemented into several real life industrial sanitary water heating systems to obtain the DSM load shift required by ESKOM. Measurements from a selection of these plants are provided to illustrate the significant load reductions that are being achieved during 18:00-20:00. The measured results also show that the peak load reduction is achieved without adversely affecting the availability of sufficient hot water to the persons using the showering and washing facilities served by the water heating system. A very good correlation also exists between these measured results and simulations that were done beforehand to predict the DSM potential of the project. The in line water heater concept provides an improved solution for DSM at sanitary water heating systems due to the stratified manner in which hot water is supplied to the tanks. This provides an improved hot water supply to users when compared to conventional in tank heating systems, even with load shifting being done. It also improves the storage efficiency of a plant, thereby allowing the available storage capacity of a plant to be utilized to its full extent for load shifting purposes

  7. Supply shortage forecast in Ontario: The significance of demand-side management (DSM); its tools and techniques

    International Nuclear Information System (INIS)

    Saini, S.

    2004-01-01

    Aspects of the recent report by the Ontario Electricity Conservation and Supply Task Force and Independent Market Operator which forecasts acute power supply shortages in Ontario, are discussed. Immediate action is recommended to avert the problem. The principal recommendation concerns the adoption of Demand Side Management as a tool to reduce the widening gap between supply and demand, citing supply shortage, imports, high prices, deregulated market and environmental concerns as the driving forces which push for the adoption of DSM. It is claimed that DSM, through its tools such as Demand/Load Response Programs and Time-of-Use rates has the capacity to create the necessary balance between supply and demand more efficiently, and in a more timely fashion than supply side management. The demand for adoption of DSM is justified on the basis of a careful examination of the magnitude and significance of each of the driving forces affecting the electricity supply in Ontario, as well as the benefits and techniques of DSM designed to manage power shortages. Energy Conservation and Efficiency and Demand/Load Response Programs are discussed as the principal DSM techniques, while Dynamic/Real Time Pricing, Time-of-Use Rates, Automated /Smart Metering, Web-based/Communication Systems, Reliability-based Programs, Market/Price-based programs, and Types of Load Control are described as the principal tools used by DSM. DSM program approaches and strategies are also reviewed, along with a brief list of successful examples of DSM applications. 3 figs

  8. Supply shortage forecast in Ontario: The significance of demand-side management (DSM); its tools and techniques

    Energy Technology Data Exchange (ETDEWEB)

    Saini, S.

    2004-06-01

    Aspects of the recent report by the Ontario Electricity Conservation and Supply Task Force and Independent Market Operator which forecasts acute power supply shortages in Ontario, are discussed. Immediate action is recommended to avert the problem. The principal recommendation concerns the adoption of Demand Side Management as a tool to reduce the widening gap between supply and demand, citing supply shortage, imports, high prices, deregulated market and environmental concerns as the driving forces which push for the adoption of DSM. It is claimed that DSM, through its tools such as Demand/Load Response Programs and Time-of-Use rates has the capacity to create the necessary balance between supply and demand more efficiently, and in a more timely fashion than supply side management. The demand for adoption of DSM is justified on the basis of a careful examination of the magnitude and significance of each of the driving forces affecting the electricity supply in Ontario, as well as the benefits and techniques of DSM designed to manage power shortages. Energy Conservation and Efficiency and Demand/Load Response Programs are discussed as the principal DSM techniques, while Dynamic/Real Time Pricing, Time-of-Use Rates, Automated /Smart Metering, Web-based/Communication Systems, Reliability-based Programs, Market/Price-based programs, and Types of Load Control are described as the principal tools used by DSM. DSM program approaches and strategies are also reviewed, along with a brief list of successful examples of DSM applications. 3 figs.

  9. Demand-side bidding in Brazil; Leilao de eficiencia energetica no Brasil

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, Agenor Gomes Pinto

    2008-01-15

    Since the New Electric Sector Model's conception an energy-efficiency auction, like the ones used to buy new energy, was considered. Recently, the subject has been frequently commented in studies and meetings. This thesis discuss the main issues about its implementation in Brazil and proposes a model for this. The first chapter shows the history and the Electric Sector actual frame, with emphasis in the energy planning, resumed after the 2001 electricity shortage, the structure created for the system expansion and analyses the results of the new energy's auctions until now. The second chapter studies how the energy-efficiency auction can affect agents and consumers and presents the auction theory, which is growing fast in recent years, and how it can be applied to the present case, showing the possible agents' behavior - ESCOs, larger consumers and appliance manufacturers, and its implication on the auction shape. The third chapter shows the past world experience in energy-efficiency selling - the USA DSB (demand-side bidding) and its actual results and an IEA (International Energy Agency) study about this market mechanism of energy-efficiency promotion. 'The DSB works but it's not simple' (Geller, 2006) sums up the main conclusion about DSB - it develops the M and V techniques and the ESCO industry, making energy-efficiency as good as new generation for system's growing. The fourth chapter presents a proposal for the energy-efficiency auction's implementation in Brazil - its opportunity, resources source, regional aspects and the steps to get there. The fifth chapter analyses the M and V 's techniques and shows examples of the four options for projects - the M and V is essential for the auction success and its development, on the other hand, can leverage the energy-efficiency market in Brazil. Finally, the last chapter concludes that the energy-efficiency auction can make a great contribution for energy efficiency and energy planning, but it can't be the only

  10. Demand-side bidding in Brazil; Leilao de eficiencia energetica no Brasil

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, Agenor Gomes Pinto

    2008-01-15

    Since the New Electric Sector Model's conception an energy-efficiency auction, like the ones used to buy new energy, was considered. Recently, the subject has been frequently commented in studies and meetings. This thesis discuss the main issues about its implementation in Brazil and proposes a model for this. The first chapter shows the history and the Electric Sector actual frame, with emphasis in the energy planning, resumed after the 2001 electricity shortage, the structure created for the system expansion and analyses the results of the new energy's auctions until now. The second chapter studies how the energy-efficiency auction can affect agents and consumers and presents the auction theory, which is growing fast in recent years, and how it can be applied to the present case, showing the possible agents' behavior - ESCOs, larger consumers and appliance manufacturers, and its implication on the auction shape. The third chapter shows the past world experience in energy-efficiency selling - the USA DSB (demand-side bidding) and its actual results and an IEA (International Energy Agency) study about this market mechanism of energy-efficiency promotion. 'The DSB works but it's not simple' (Geller, 2006) sums up the main conclusion about DSB - it develops the M and V techniques and the ESCO industry, making energy-efficiency as good as new generation for system's growing. The fourth chapter presents a proposal for the energy-efficiency auction's implementation in Brazil - its opportunity, resources source, regional aspects and the steps to get there. The fifth chapter analyses the M and V 's techniques and shows examples of the four options for projects - the M and V is essential for the auction success and its development, on the other hand, can leverage the energy-efficiency market in Brazil. Finally, the last chapter concludes that the energy-efficiency auction can make a great contribution for energy efficiency and

  11. Measuring the financial impact of demand response for electricity retailers

    International Nuclear Information System (INIS)

    Feuerriegel, Stefan; Neumann, Dirk

    2014-01-01

    Due to the integration of intermittent resources of power generation such as wind and solar, the amount of supplied electricity will exhibit unprecedented fluctuations. Electricity retailers can partially meet the challenge of matching demand and volatile supply by shifting power demand according to the fluctuating supply side. The necessary technology infrastructure such as Advanced Metering Infrastructures for this so-called Demand Response (DR) has advanced. However, little is known about the economic dimension and further effort is strongly needed to realistically quantify the financial impact. To succeed in this goal, we derive an optimization problem that minimizes procurement costs of an electricity retailer in order to control Demand Response usage. The evaluation with historic data shows that cost volatility can be reduced by 7.74%; peak costs drop by 14.35%; and expenditures of retailers can be significantly decreased by 3.52%. - Highlights: • Ex post simulation to quantify financial impacts of demand response. • Effects of Demand Response are simulated based on real-world data. • Procurement costs of an average electricity retailer decrease by 3.4%. • Retailers can cut hourly peak expenditures by 12.1%. • Cost volatility is reduced by 12.2%

  12. Evaluation of Orange and Rockland Utilities, Inc.`s competitive bidding program for demand-side resources. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Peters, J.S.; Stucky, L.; Seratt, P.; Darden-Butler, D. [Barakat and Chamberlin, Inc., Portland, OR (United States)

    1993-02-01

    The process evaluation reports on the implementation of Orange and Rockland Utilities demand-side bidding program in New York State during 1991 and 1992. The program is implemented by two energy service companies in Orange and rockland`s New York State service territory. The process evaluation methodology included interviews with utility staff (3), energy service company staff (2), and participating (6) and nonparticipating (7) utility customers. The two energy service companies had enrolled 14 customers in the program by summer 1992. One company had achieved 90% of their 2.75 MW bid and the other had achieved less than 90% of their 6.9 MW bid. Critical factors in success were determination of a reasonable bid amount for the market and marketing to the appropriate customers. Customers most interested in the program included those with limited access to capital and medium-sized firms with poor cash flows, particularly schools and hospitals. The findings also show that due to the incentive structure and associated need for substantial customer contributions, lighting measures dominate all installations. Customers, however, were interested in the potential savings and six of the nonparticipants chose to either install measures on their own or enroll in the utility`s rebate program.

  13. Increasing access to institutional deliveries using demand and supply side incentives: early results from a quasi-experimental study

    Directory of Open Access Journals (Sweden)

    Serwadda David

    2011-03-01

    Full Text Available Abstract Background Geographical inaccessibility, lack of transport, and financial burdens are some of the demand side constraints to maternal health services in Uganda, while supply side problems include poor quality services related to unmotivated health workers and inadequate supplies. Most public health interventions in Uganda have addressed only selected supply side issues, and universities have focused their efforts on providing maternal services at tertiary hospitals. To demonstrate how reforms at Makerere University College of Health Sciences (MakCHS can lead to making systemic changes that can improve maternal health services, a demand and supply side strategy was developed by working with local communities and national stakeholders. Methods This quasi-experimental trial is conducted in two districts in Eastern Uganda. The supply side component includes health worker refresher training and additions of minimal drugs and supplies, whereas the demand side component involves vouchers given to pregnant women for motorcycle transport and the payment to service providers for antenatal, delivery, and postnatal care. The trial is ongoing, but early analysis from routine health information systems on the number of services used is presented. Results Motorcyclists in the community organized themselves to accept vouchers in exchange for transport for antenatal care, deliveries and postnatal care, and have become actively involved in ensuring that women obtain care. Increases in antenatal, delivery, and postnatal care were demonstrated, with the number of safe deliveries in the intervention area immediately jumping from Conclusions Transport and service vouchers appear to be a viable strategy for rapidly increasing maternal care. MakCHS can design strategies together with stakeholders using a learning-by-doing approach to take advantage of community resources.

  14. Increasing access to institutional deliveries using demand and supply side incentives: early results from a quasi-experimental study.

    Science.gov (United States)

    Ekirapa-Kiracho, Elizabeth; Waiswa, Peter; Rahman, M Hafizur; Makumbi, Fred; Kiwanuka, Noah; Okui, Olico; Rutebemberwa, Elizeus; Bua, John; Mutebi, Aloysius; Nalwadda, Gorette; Serwadda, David; Pariyo, George W; Peters, David H

    2011-03-09

    Geographical inaccessibility, lack of transport, and financial burdens are some of the demand side constraints to maternal health services in Uganda, while supply side problems include poor quality services related to unmotivated health workers and inadequate supplies. Most public health interventions in Uganda have addressed only selected supply side issues, and universities have focused their efforts on providing maternal services at tertiary hospitals. To demonstrate how reforms at Makerere University College of Health Sciences (MakCHS) can lead to making systemic changes that can improve maternal health services, a demand and supply side strategy was developed by working with local communities and national stakeholders. This quasi-experimental trial is conducted in two districts in Eastern Uganda. The supply side component includes health worker refresher training and additions of minimal drugs and supplies, whereas the demand side component involves vouchers given to pregnant women for motorcycle transport and the payment to service providers for antenatal, delivery, and postnatal care. The trial is ongoing, but early analysis from routine health information systems on the number of services used is presented. Motorcyclists in the community organized themselves to accept vouchers in exchange for transport for antenatal care, deliveries and postnatal care, and have become actively involved in ensuring that women obtain care. Increases in antenatal, delivery, and postnatal care were demonstrated, with the number of safe deliveries in the intervention area immediately jumping from Voucher revenues have been used to obtain needed supplies to improve quality and to pay health workers, ensuring their availability at a time when workloads are increasing. Transport and service vouchers appear to be a viable strategy for rapidly increasing maternal care. MakCHS can design strategies together with stakeholders using a learning-by-doing approach to take advantage of

  15. Utilizing a programmatic focus on energy efficiency and customer feedback to improve the effectiveness of demand side management

    International Nuclear Information System (INIS)

    Smith, S.; Tharp, A.

    2006-01-01

    A project to encourage effective demand side management (DSM) programs through price-responsive load management was presented. The project was conducted through literature searches, surveys of utility programs and interviews with experts. National security, environmental awareness and economic factors were identified as the primary drivers for DSM. A overview of DSM strategies included details of: price responsive programs; power buyback; direct load control; and conservation-based rebates. Target sectors for DSM programs were divided into 4 sectors: (1) residential; (2) agricultural; (3) commercial/industrial; and (4) institutional. A customer decision cycle for DSM was presented, and various programs were evaluated. A comparison between DR and energy efficiency programs in the United States suggested that an increased focus on energy efficiency will benefit DR programs. However, perception of risk due to pricing exposure and the potential for loss of comfort are significant barriers to effective DSM. Studies have shown that DSM is most effective when participants receive direct feedback on consumption. Simple mechanisms for alerting participants of peak periods were recommended, as well as disaggregation tools to highlight areas of high energy usage and spotlight corrective measures. National and regional coordination of DSM activities was also recommended. It was concluded that DSM programs are successful when both customers and suppliers have an equal stake in their success. refs., tabs., figs

  16. Supply- and Demand-Side Factors Influencing Utilization of Infant and Young Child Feeding Counselling Services in Viet Nam.

    Science.gov (United States)

    Nguyen, Phuong H; Kim, Sunny S; Nguyen, Tuan T; Tran, Lan M; Hajeebhoy, Nemat; Frongillo, Edward A; Ruel, Marie T; Rawat, Rahul; Menon, Purnima

    2016-01-01

    Adequate utilization of services is critical to maximize the impact of counselling on infant and young child feeding (IYCF), but little is known about factors affecting utilization. Our study examined supply- and demand-side factors associated with the utilization of IYCF counselling services in Viet Nam. We used survey data from mothers with children Viet Nam, and may be relevant for increasing and sustaining use of nutrition services in similar contexts.

  17. An Economic Evalution of Demand-side Energy Storage Systems by using a Multi-agent based Electricity Market

    Science.gov (United States)

    Furusawa, Ken; Sugihara, Hideharu; Tsuji, Kiichiro

    Opened wholesale electric power market in April 2005, deregulation of electric power industry in Japan has faced a new competitive environment. In the new environment, Independent Power Producer (: IPP), Power Producer and Supplier (: PPS), Load Service Entity (: LSE) and electric utility can trade electric energy through both bilateral contracts and single-price auction at the electricity market. In general, the market clearing price (: MCP) is largely changed by amount of total load demand in the market. The influence may cause price spike, and consequently the volatility of MCP will make LSEs and their customers to face a risk of revenue and cost. DSM is attracted as a means of load leveling, and has effect on decreasing MCP at peak load period. Introducing Energy Storage systems (: ES) is one of DSM in order to change demand profile at customer-side. In case that customers decrease their own demand at jumped MCP, a bidding strategy of generating companies may be changed their strategy. As a result, MCP is changed through such complex mechanism. In this paper the authors evaluate MCP by multi-agent. It is considered that customer-side ES has an effect on MCP fluctuation. Through numerical examples, this paper evaluates the influence on MCP by controlling customer-side ES corresponding to variation of MCP.

  18. A future Demand Side Management (DSM) opportunity for utility as variable renewable penetrate scale up using agriculture.

    Science.gov (United States)

    Ines, A.; Bhattacharjee, A.; Modi, V.; Robertson, A. W.; Lall, U.; Kocaman Ayse, S.; Chaudhary, S.; Kumar, A.; Ganapathy, A.; Kumar, A.; Mishra, V.

    2015-12-01

    Energy demand management, also known as demand side management (DSM), is the modification of consumer demand for energy through various methods such as smart metering, incentive based schemes, payments for turning off loads or rescheduling loads. Usually, the goal of demand side management is to encourage the consumer to use less power during periods of peak demand, or to move the time of energy use to off-peak times. Peak demand management does not necessarily decrease total energy consumption, but could be expected to reduce the need for investments in networks and/or power plants for meeting peak demands. Electricity use can vary dramatically on short and medium time frames, and the pricing system may not reflect the instantaneous cost as additional higher-cost that are brought on-line. In addition, the capacity or willingness of electricity consumers to adjust to prices by altering elasticity of demand may be low, particularly over short time frames. In the scenario of Indian grid setup, the retail customers do not follow real-time pricing and it is difficult to incentivize the utility companies for continuing the peak demand supply. A question for the future is how deeper penetration of renewable will be handled? This is a challenging problem since one has to deal with high variability, while managing loss of load probabilities. In the case of managing the peak demand using agriculture, in the future as smart metering matures with automatic turn on/off for a pump, it will become possible to provide an ensured amount of water or energy to the farmer while keeping the grid energized for 24 hours. Supply scenarios will include the possibility of much larger penetration of solar and wind into the grid. While, in absolute terms these sources are small contributors, their role will inevitably grow but DSM using agriculture could help reduce the capital cost. The other option is of advancing or delaying pump operating cycle even by several hours, will still ensure

  19. How to optimize tourism destination supply: A case in Shanghai from perspective of supplier and demand side perception

    Science.gov (United States)

    Xue, Huaju; Fang, Chengjiang

    2018-02-01

    It is vital to assess the regional tourist supply capability by suppliers and demand groups. The supply side’s evaluation of the regional supply capacity determines the direction of the supply investment in future, the demand side’s evaluation indicates their satisfaction degree of the destination supply and also effects their revisit the tourism destination. Therefore, the assessment of the supply and demand sides is an important reference for the reform of destination supply side, which helps us find the shortage of the destination supply factors and optimize tourism destination supply promptly. This paper through investigating tourism supply and demand groups in Shanghai, used the survey data and constructed tourism supply optimization model, analyzed the current situation of tourism supply factors in Shanghai. Results showed that the environment of Shanghai should be improved first, including improving urban air and water quality, up-grading public sanitation and increasing urban green coverage. Other supply factors improved priority were information and marketing, we should improve the information consultation of scenic spots, increase the intensity of tourism promotion and provide more free travel publicity brochures.

  20. A Multi-Objective Demand Side Management Considering ENS Cost in Smart Grids

    DEFF Research Database (Denmark)

    Yousefi Khanghah, Babak; Ghassemzadeh, Saeid; Hosseini, Seyed Hossein

    2017-01-01

    In this paper a new method is presented to achieve economic exploitation and proper usage of network capacity by exerting controlling actions over flexible loads and energy storage (ES) equipment. Multi-objective planning for demand response programs (DRP) and battery management policies is carried...... out by considering energy not supplied (ENS). In order to achieve an optimal scheduling, charge/discharge control for batteries, demand response programs and dispatch of controllable distributed generations (DGs) are also considered. Then, the balanced cost and benefits of participants are evaluated...

  1. Impact on energy requirements and emissions of heat pumps and micro-cogenerators participating in demand side management

    International Nuclear Information System (INIS)

    Cooper, Samuel J.G.; Hammond, Geoffrey P.; McManus, Marcelle C.; Rogers, John G.

    2014-01-01

    The potential impacts of participating in demand side management (DSM) on the performance of air source heat pumps (ASHP) and micro-combined heat and power (mCHP) units are considered by this study. As significant consumers and generators of electricity at the distribution level, large numbers of heat pumps and micro-cogenerators would provide considerable scope for participation in DSM systems. However, it is possible that operating regimes which are optimised for grid considerations will not achieve the maximum performance that is possible from the units. Modelling has been conducted to investigate the significance of this effect, considering the case where local distribution constraints are the main driver for demand side interventions. A model of domestic electrical demand has been adapted to consider a neighbourhood of 128 dwellings in order to identify when interventions are necessary. This has been combined with dynamic models of two combustion engine micro-cogenerators, a solid oxide fuel cell micro-cogenerator and two ASHPs. A simple thermal model of each building is combined with a range of user preferences in order to determine the preferred operating profiles of the heating units. The DSM scheme analysed here is likely to have minimal impact on the emissions and energy requirements associated with each heating unit. Its effect is similar to that which occurs without DSM if the control system gain is relaxed such that equivalent thermal comfort is achieved. DSM can reduce the peak electrical demand of the neighbourhood. However, in the scenarios investigated, it is unlikely that the peaks can be reduced sufficiently such that they do not exceed the capacity of the local distribution transformer if ASHPs are used in all dwellings. By using a combination of mCHP units with ASHPs, it is possible to supply heating to all dwellings without exceeding this capacity. In this case, the use of DSM can increase the ratio of ASHPs used. In the context of a low

  2. Why commercial customers are SIC of DSM [demand-side management] marketing

    International Nuclear Information System (INIS)

    Lewis, L.E.

    1990-01-01

    Studies have shown that the success of demand management programs, which have demonstrated economic benefits, depends on the level of customer participation. In order to have a better understanding of the decisionmaking process of commercial customers with respect to demand management programs, a study was undertaken to determine the preferences and the behavior of this class of clientele. This clientele, whose power consumption has been increasing at a faster rate than that of other sectors, represents a vast range of enterprises producing and supplying all kinds of products. Many of them operate from numerous geographic points on local, regional, national, and even world scales and are generally hierarchically organized. Because of these characteristics, their decisionmaking processes and their needs are equally complex, more so than in the residential sector. A multidimensional approach has been adopted to ensure that their needs are determined according to a quantitative and qualitative research method. The conclusions of the quantitative research have demonstrated that the frameworks representing different organizations respond differently to questions on their needs. It is also noted that certain commercial enterprises are of a cohesive nature (i.e. there is a consistency in understanding of corporate strategic and operational requirements at all hierarchical levels), while others are more diffuse. Those responsible for marketing demand management programs therefore must improve their understanding of the strategic and operational needs of their commercial customers in order to make their demand management programs productive in the view of the appropriate personnel at the hierarchical level applicable to the company concerned

  3. Challenges of using model predictive control for active demand side management

    DEFF Research Database (Denmark)

    Zong, Yi; You, Shi; Hu, Junjie

    2015-01-01

    When there is a high penetration of renewables in the power system, it requires coordinated management of large numbers of distributed and demand response resources, intermittent resources to maintain the grid reliability and improve operational economics. This paper presents a hierarchical...... and dynamic power price signals....

  4. Dynamic Behaviour of a Population of Controlled-by-price Demand Side Resources

    DEFF Research Database (Denmark)

    Sossan, Fabrizio; Han, Xue; Bindner, Henrik W.

    2014-01-01

    It is described that controlling or shedding by price the power consumption of a population of thermostatic loads introduces in the aggregate consumption dynamic effects th at cannot be disregarded if electrical flexible demand is meant to supply power system services. It is shown that inducing...

  5. Report of the advisory group on demand-side management and demand response in Ontario in response to the Minister's directive to the Ontario Energy Board

    International Nuclear Information System (INIS)

    2003-01-01

    The Ontario Energy Board was directed in June 2003 to consult with stakeholders to identify and review options for the delivery of demand-side management (DSM) and demand response (DR) activities within the electricity sector, including the role of local distribution companies (distributors) in such activities. A total of 118 stakeholders participated in the consultation process, and 31 representatives from all sectors were then invited to take part in an advisory working group to develop options to be considered by the Board when preparing the recommendations to the Minister. This report presents a consolidation of the Group's working documents and the results of deliberations both as a unit and in small groups. The best way to present the many newly developed models was as a single Central Agency model demonstrating variations in the role of the Central Agency and other players in the electricity market. The paper was divided into the following six sections: introduction; market issues; demand response framework option; central agency framework-alternative models; Ontario Energy Board-wires companies DSM framework; and, general issues

  6. A Novel Prosumer-Based Energy Sharing and Management (PESM Approach for Cooperative Demand Side Management (DSM in Smart Grid

    Directory of Open Access Journals (Sweden)

    Sohail Razzaq

    2016-10-01

    Full Text Available Increasing population and modern lifestyle have raised energy demands globally. Demand Side Management (DSM is one important tool used to manage energy demands. It employs an advanced power infrastructure along with bi-directional information flow among utilities and users in order to achieve a balanced load curve and minimize demand-supply mismatch. Traditionally, this involves shifting the electricity demand from peak hours to other times of the day in an optimized manner. Multiple users equipped with renewable resources work in coordination with each other in order to achieve mutually beneficial energy management. This, in turn, has generated the concept of cooperative DSM. Such users, called prosumers, consume and produce energy using renewable resources (solar, wind etc.. Prosumers with surplus energy sell to the grid as well as to other consumers. In this paper, a novel Prosumer-based Energy Sharing and Management (PESM scheme for cooperative DSM has been proposed. A simulation model has been developed for testing the proposed method. Different variations of the proposed methodology have been experimented with different criteria. The results show that the proposed energy sharing scheme achieves DSM purposes in a useful manner.

  7. Aggregation of demand side flexibility in a smart grid: A review for European market design

    OpenAIRE

    Eid , Cherrelle; Codani , Paul; Chen , Yurong; Perez , Yannick; Hakvoort , Rudi

    2015-01-01

    International audience; The increased share of renewable generation and the integration of Distributed Generation (DG) require more electricity system flexibility. One way to increase this flexibility is to use the potentials of demand response (DR). In order to activate the full range of customers in DR, a new market intermediary actor is needed to aggregate the resources in an adequate technical and economical format. These actors, so called " aggregators " , can act as flexibility provider...

  8. Maximizing Energy Savings Reliability in BC Hydro Industrial Demand-side Management Programs: An Assessment of Performance Incentive Models

    Science.gov (United States)

    Gosman, Nathaniel

    For energy utilities faced with expanded jurisdictional energy efficiency requirements and pursuing demand-side management (DSM) incentive programs in the large industrial sector, performance incentive programs can be an effective means to maximize the reliability of planned energy savings. Performance incentive programs balance the objectives of high participation rates with persistent energy savings by: (1) providing financial incentives and resources to minimize constraints to investment in energy efficiency, and (2) requiring that incentive payments be dependent on measured energy savings over time. As BC Hydro increases its DSM initiatives to meet the Clean Energy Act objective to reduce at least 66 per cent of new electricity demand with DSM by 2020, the utility is faced with a higher level of DSM risk, or uncertainties that impact the costeffective acquisition of planned energy savings. For industrial DSM incentive programs, DSM risk can be broken down into project development and project performance risks. Development risk represents the project ramp-up phase and is the risk that planned energy savings do not materialize due to low customer response to program incentives. Performance risk represents the operational phase and is the risk that planned energy savings do not persist over the effective measure life. DSM project development and performance risks are, in turn, a result of industrial economic, technological and organizational conditions, or DSM risk factors. In the BC large industrial sector, and characteristic of large industrial sectors in general, these DSM risk factors include: (1) capital constraints to investment in energy efficiency, (2) commodity price volatility, (3) limited internal staffing resources to deploy towards energy efficiency, (4) variable load, process-based energy saving potential, and (5) a lack of organizational awareness of an operation's energy efficiency over time (energy performance). This research assessed the capacity

  9. Flexible investment under uncertainty in smart distribution networks with demand side response: Assessment framework and practical implementation

    International Nuclear Information System (INIS)

    Schachter, Jonathan A.; Mancarella, Pierluigi; Moriarty, John; Shaw, Rita

    2016-01-01

    Classical deterministic models applied to investment valuation in distribution networks may not be adequate for a range of real-world decision-making scenarios as they effectively ignore the uncertainty found in the most important variables driving network planning (e.g., load growth). As greater uncertainty is expected from growing distributed energy resources in distribution networks, there is an increasing risk of investing in too much or too little network capacity and hence causing the stranding and inefficient use of network assets; these costs are then passed on to the end-user. An alternative emerging solution in the context of smart grid development is to release untapped network capacity through Demand-Side Response (DSR). However, to date there is no approach able to quantify the value of ‘smart’ DSR solutions against ‘conventional’ asset-heavy investments. On these premises, this paper presents a general real options framework and a novel probabilistic tool for the economic assessment of DSR for smart distribution network planning under uncertainty, which allows the modeling and comparison of multiple investment strategies, including DSR and capacity reinforcements, based on different cost and risk metrics. In particular the model provides an explicit quantification of the economic value of DSR against alternative investment strategies. Through sensitivity analysis it is able to indicate the maximum price payable for DSR service such that DSR remains economically optimal against these alternatives. The proposed model thus provides Regulators with clear insights for overseeing DSR contractual arrangements. Further it highlights that differences exist in the economic perspective of the regulated DNO business and of customers. Our proposed model is therefore capable of highlighting instances where a particular investment strategy is favorable to the DNO but not to its customers, or vice-versa, and thus aspects of the regulatory framework which may

  10. Demand-Side Contribution to Primary Frequency Control With Wind Farm Auxiliary Control

    DEFF Research Database (Denmark)

    Gomez-Lazaro, Emilio; Munoz-Benavente, Irene; Hansen, Anca Daniela

    2014-01-01

    Maintaining a close balance between power generation and demand is essential for sustaining the quality and reliability of a power system. Currently, due to increased renewable energy generation, frequency deviations and power fluctuations of greater concern are being introduced to the grid...... to the primary frequency control together with an auxiliary frequency control, which is carried out by variable-speed wind turbines through an additional control loop that synthesizes virtual inertia. We have evaluated both the suitability of these two additional control actions counteracting frequency deviation...

  11. Local government involvement in long term resource planning for community energy systems. Demand side management

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    A program was developed to coordinate governmental, research, utility, and business energy savings efforts, and to evaluate future potential actions, based on actual field data obtained during the implementation of Phase I of the State Resource Plan. This has lead to the establishment of a state conservation and energy efficiency fund for the purpose of establishing a DSM Program. By taking a state wide perspective on resource planning, additional savings, including environmental benefits, can be achieved through further conservation and demand management. This effort has already blossomed into a state directive for DSM programs for the natural gas industry.

  12. Decomposition of toxicity emission changes on the demand and supply sides: empirical study of the US industrial sector

    Science.gov (United States)

    Fujii, Hidemichi; Okamoto, Shunsuke; Kagawa, Shigemi; Managi, Shunsuke

    2017-12-01

    This study investigated the changes in the toxicity of chemical emissions from the US industrial sector over the 1998-2009 period. Specifically, we employed a multiregional input-output analysis framework and integrated a supply-side index decomposition analysis (IDA) with a demand-side structural decomposition analysis (SDA) to clarify the main drivers of changes in the toxicity of production- and consumption-based chemical emissions. The results showed that toxic emissions from the US industrial sector decreased by 83% over the studied period because of pollution abatement efforts adopted by US industries. A variety of pollution abatement efforts were used by different industries, and cleaner production in the mining sector and the use of alternative materials in the manufacture of transportation equipment represented the most important efforts.

  13. Measurement system analysis for one-sided tolerance

    Directory of Open Access Journals (Sweden)

    Szemik Kamil

    2017-01-01

    Full Text Available Measurement system analysis is carried out in order to determine if a capability to perform measurements in terms of product and process control is sufficient, indicating that the type I and the type II appraisal errors probability are acceptable. Statistical analyses for measurement system evaluation presented in the literature and the industrial manuals are not applicable for all complex and unusual applications. Therefore, the purpose of this study was to develop a robust statistical analysis method for measurement system variability analysis, in terms of product control scenario applied to one-sided tolerance. In the hereby presented study, the authors presented the theoretical principles of statistical techniques for measurement variations evaluation. Subsequently, the formula of gauge repeatability and reproducibility in terms of lower specification limit was proposed. The research hypothesis was tested using the statistical analysis.

  14. Distributed demand-side management optimisation for multi-residential users with energy production and storage strategies

    Directory of Open Access Journals (Sweden)

    Emmanuel Chifuel Manasseh

    2014-12-01

    Full Text Available This study considers load control in a multi-residential setup where energy scheduler (ES devices installed in smart meters are employed for demand-side management (DSM. Several residential end-users share the same energy source and each residential user has non-adjustable loads and adjustable loads. In addition, residential users may have storage devices and renewable energy sources such as wind turbines or solar as well as dispatchable generators. The ES devices exchange information automatically by executing an iterative distributed algorithm to locate the optimal energy schedule for each end-user. This will reduce the total energy cost and the peak-to-average ratio (PAR in energy demand in the electric power distribution. Users possessing storage devices and dispatchable generators strategically utilise their resources to minimise the total energy cost together with the PAR. Simulation results are provided to evaluate the performance of the proposed game theoretic-based distributed DSM technique.

  15. One-sided measurement-device-independent quantum key distribution

    Science.gov (United States)

    Cao, Wen-Fei; Zhen, Yi-Zheng; Zheng, Yu-Lin; Li, Li; Chen, Zeng-Bing; Liu, Nai-Le; Chen, Kai

    2018-01-01

    Measurement-device-independent quantum key distribution (MDI-QKD) protocol was proposed to remove all the detector side channel attacks, while its security relies on the trusted encoding systems. Here we propose a one-sided MDI-QKD (1SMDI-QKD) protocol, which enjoys detection loophole-free advantage, and at the same time weakens the state preparation assumption in MDI-QKD. The 1SMDI-QKD can be regarded as a modified MDI-QKD, in which Bob's encoding system is trusted, while Alice's is uncharacterized. For the practical implementation, we also provide a scheme by utilizing coherent light source with an analytical two decoy state estimation method. Simulation with realistic experimental parameters shows that the protocol has a promising performance, and thus can be applied to practical QKD applications.

  16. Simulation of demand side participation in Spanish short term electricity markets

    International Nuclear Information System (INIS)

    Valencia-Salazar, I.; Alvarez, C.; Escriva-Escriva, G.; Alcazar-Ortega, M.

    2011-01-01

    Highlights: → Benefits from customer active participation can be obtained with a proper generation of bids and offers. → Simulation of Spanish customers' participation is shown in daily, intra-daily and balancing markets. → Market efficiency and economics profits arise in balancing markets by using customer load reductions. → Real market prices and real customers' consumptions profiles are used in the simulations. -- Abstract: Demand response resources management is one of the most investigated solutions oriented to improve the efficiency in electricity markets. In this paper, the capability of customers to participate in short term markets is analyzed. An available methodology to analyze the daily and monthly energy consumptions of large customers is used to create energy offers and bids. This allows customers to participate in energy markets in order to buy, as first step, the usual electricity consumption and, additionally, to offer demand reductions in the short term electricity markets. Additionally, this paper shows the customer potential to participate in the Spanish electricity markets.

  17. Model Predictive Controller for Active Demand Side Management with PV Self-consumption in an Intelligent Building

    DEFF Research Database (Denmark)

    Zong, Yi; Mihet-Popa, Lucian; Kullmann, Daniel

    2012-01-01

    This paper presents a Model Predictive Controller (MPC) for electrical heaters’ predictive power consumption including maximizing the use of local generation (e.g. solar power) in an intelligent building. The MPC is based on dynamic power price and weather forecast, considering users’ comfort...... settings to meet an optimization objective such as minimum cost and minimum reference temperature error. It demonstrates that this MPC strategy can realize load shifting, and maximize the PV self-consumption in the residential sector. With this demand side control study, it is expected that MPC strategy...

  18. Demand-side management project for Tenaga Nasional Berhad. Progress report No. 3. Volume 2. Export trade information

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-09-01

    The objective of this work is identify and encompass those utility demand-side management (DSM) activities that influence customer electricity use to produce customer savings while favorably modifying the utility load. These activities can help utilities operate more efficiently and effectively in uncertain and competitive business environments. This work authorization will initiate the following: Provide descriptive information on the operating characteristics, applicability, specifications, costs, and benefits of DSM/end-use technologies; Characterize the marketing methods used to encourage customer acceptance of these technologies.

  19. Differences in strength and speed demands between 4v4 and 8v8 small-sided football games

    DEFF Research Database (Denmark)

    Rebelo, António Natal Campos; Silva, Pedro; Rago, Vincenzo

    2016-01-01

    The aims of this study were (i) to characterise the acceleration demands of two different formats of small-sided game (SSG), i.e., 4v4 + goalkeepers (4v4 + GK) and 8v8 + goalkeepers (8v8 + GK); (ii) to analyse the correlation between performance in power-based tests and acceleration-based physica...... to repetitions and fatigue development of muscle power-based actions than 8v8 + GK. It may therefore be logical to use the former type of SSG to target development of power-related football actions....

  20. How Tobacco Control Measures and Smuggling Influence Demand ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    How Tobacco Control Measures and Smuggling Influence Demand in Panama. Panama's tobacco epidemic demonstrates ... Their goal: establish a new threshold for increasing the luxury tax on tobacco products, including cigarettes, based on the monthly evolution of cigarette sales. The researchers will survey brands in ...

  1. Optometry services in Ontario: supply - and demand-side factors from 2011 to 2036.

    Science.gov (United States)

    Leonard, Philip Sj; Sweetman, Arthur; Zhang, Xue Helen

    2014-01-01

    Optometric labour market projections are provided. First, population growth and ageing-based estimates of the rate of increase of eye-care services in Ontario from 2011 to 2$ are presented, holding the age-sex structure of utilization constant. Then, using data on the 2011 supply and working hours of Ontario's optometrists, the number of optometrists needed to keep the level of optometric services per age-sex-adjusted person comparable over time is estimated. The projections suggest that the number of Ontario optometrists should grow by approximately 30-40 full-time equivalents per year; to offset retirements and account for decreasing work hours, this suggests 77-90 new practitioners are required each year. However, in recent years, the number of Ontario optometrists has been growing faster than this, suggesting either that demand has exceeded supply and/or surpluses will accumulate if this trend continues. Copyright © 2014 Longwoods Publishing.

  2. Benefits of Demand Side Response in Providing Frequency Response Service in the Future GB Power System

    Directory of Open Access Journals (Sweden)

    Fei eTeng

    2015-08-01

    Full Text Available The demand for ancillary service is expected to increase significantly in the future GB electricity system due to high penetration of wind. In particular, the need for frequency response, required to deal with sudden frequency drops following a loss of generator, will increase because of the limited inertia capability of wind plants. This paper quantifies the requirements for primary frequency response and analyses the benefits of frequency response provision from DSR. The results show dramatic changes in frequency response requirements driven by high penetration of wind. Case studies carried out by using an advanced stochastic generation scheduling model suggest that the provision of frequency response from DSR could greatly reduce the system operation cost, wind curtailment and carbon emissions in the future GB system characterised by high penetration of wind. Furthermore, the results demonstrate that the benefit of DSR shows significant diurnal and seasonal variation, whereas an even more rapid (instant delivery of frequency response from DSR could provide significant additional value. Our studies also indicate that the competing technologies to DSR, namely battery storage and more flexible generation could potentially reduce its value by up to 35%, still leaving significant room to deploy DSR as frequency response provider.

  3. How to tackle energy saving and load leveling. Energy saving towards 2000 and measures for the coming winter (energy-saving activities by California`s SCE, demand side management activities); Sho energy fuka heijunka ni do torikumuka. Seireki 2000 nen ni muketa sho energy to konto no shoene taisaku, Kashu SCE no sho energy (DSM katsudo wo saguru)

    Energy Technology Data Exchange (ETDEWEB)

    Nasu, S. [The Energy Conservation Center Japan, Tokyo (Japan)

    1997-02-01

    Tokyo Electric Power has realized a peak shift of 5% for the maximum power demand by various measures to cope with increasing power demand and differential rate by time zone, including expansion of the differential rate system and heat-storage systems. Some of more notable recent techniques are eco-ice and eco-vendor systems, the former storing ice in the heat-storage tanks and the latter strongly cooling vending machines during nighttime. The NAS battery system is being developed as the new technique for load leveling. The energy-related advisory organ for Minister of International Trade and Industry asks each industrial unit to save at least 1% of power on the annual average as the energy-saving measure towards 2000. The energy-saving measures promoted by the government for the coming winter are controlled release of wastes, efficient use of power, setting room temperature at 19{degree}C or lower and voluntarily refrain from commuting by cars. The US power industry is abandoning the concept of DSM in the midst of deregulation and increased competition, and cutting budgets for new energy development. California`s SCE is promoting energy-saving through expanded use of high-efficiency motors, accurate grasp of customers` needs and publicity activities through internet systems. 4 figs., 1 tab.

  4. Understanding international postgraduate studies. Drivers from the supply and the demand side.

    Science.gov (United States)

    Delgado-Serrano, M M; Gomez-Bruque, J L; Ambrosio-Albala, M J; Llamas-Moreno, B

    2010-01-01

    Changes in the global political and socioeconomic scenario are fostering the internationalization of master and doctoral programme as one of the current priorities for Universities. Changes in European higher education such as those stimulated by the Bologna process and the introduction of double, multiple or joint Master degree programmes together with the Erasmus Mundus programme are enhancing the competition of European universities in the global education market place. Universities compete to attract the best students, both national and international, to their postgraduate programmes. However, the design and launch of international masters or doctorates imply working with a different logic to the one used in national programmes. Complexity, diversity and differentiation are drivers of international education and as happens in complex systems the properties and features of the final products are different from the existing in the individual components. The aim of this paper is to understand international studies as complex systems and to analyze and identify factors affecting to the different components involved in the implementation of these programmes. The new approaches and the interrelations in aspects such as academic, administrative or economic management, quality assurance and marketing issues are examined and drivers, challenges and good practices where possible are identified. The analysis has been carried out considering the point of view of both Universities (supply-led approach) and students and employers (demand-led approach). From the analysis have emerged important questions that show the interrelation pattern and that can be useful when designing and implementing international postgraduate studies. Universities and students tend to agree about many issues however, some divergences have also been identified which make the results of the research more valuable.

  5. A demand-side approach to the optimal deployment of electric vehicle charging stations in metropolitan areas

    International Nuclear Information System (INIS)

    Andrenacci, N.; Ragona, R.; Valenti, G.

    2016-01-01

    Highlights: • A demand-side approach to the location of charging infrastructure problem is discussed in the paper. • The analysis is based on a large data-set of private vehicle travels within the urban area of Rome. • Cluster analysis is applied to the data to find the optimal location zones for charging infrastructures. • The daily energy demand and the average number of users per day are calculated for each and every charging infrastructure. - Abstract: Despite all the acknowledged advantages in terms of environmental impact reduction, energy efficiency and noise reduction, the electric mobility market is below expectations. In fact, electric vehicles have limitations that pose several important challenges for achieving a sustainable mobility system: among them, the availability of an adequate charging infrastructure is recognized as a fundamental requirement and appropriate approaches to optimize public and private investments in this field are to be delineated. In this paper we consider actual data on conventional private vehicle usage in the urban area of Rome to carry out a strategy for the optimal allocation of charging infrastructures into portions (subareas) of the urban area, based on an analysis of a driver sample under the assumption of a complete switch to an equivalent fleet of electric vehicles. Moreover, the energy requirement for each one of the subareas is estimated in terms of the electric energy used by the equivalent fleet of electric vehicles to reach their destination. The model can be easily generalized to other problems regarding facility allocation based on user demand.

  6. Climate-related electricity demand-side management in oil-exporting countries--the case of the United Arab Emirates

    International Nuclear Information System (INIS)

    Al-Iriani, Mahmoud A.

    2005-01-01

    The oil crisis of the 1970s has increased the concern about the continuity of oil imports flow to major oil-importing developed countries. Numerous policy measures including electricity demand-side management (DSM) programs have been adopted in such countries. These measures aim at reducing the growing need for electricity power that increases the dependency on imported foreign oil and damages the environment. On the other hand, the perception that energy can be obtained at very low cost in oil-rich countries led to less attention being paid to the potential of DSM policies in these countries. This paper discusses such potential using the case of the United Arab Emirates (UAE). Since air conditioning is a major source of electric energy consumption, the relationship between climate conditions and electric energy consumption is considered. An electricity demand model is constructed using time series techniques. The fitted model seems to represent these relationships rather well. Forecasts for electricity consumption using the estimated model indicate that a small reduction in cooling degrees requirement might induce a significant reduction in electric energy demand. Hence, a DSM program is proposed with policy actions to include, among others, measures to reduce cooling degrees requirement

  7. Cost benefit analysis of the demand side management programs; Analise de custos e beneficios economicos de programas de gerencia pelo lado da demanda

    Energy Technology Data Exchange (ETDEWEB)

    Schechtman, R; Baum, M [PROMON Engenharia SA, Rio de Janeiro, RJ (Brazil)

    1990-12-31

    The several cost and benefit components of the demand side management programs for the society groups, including the concessionaire, consumers and society as a whole are studied. The rule evaluations of management programs by demand side, used by North American concessionaire are also discussed. Finally, the numerical examples, that consolidating the concepts and rules evaluation are presented. (C.G.C.). 5 refs, 1 fig, 3 tabs.

  8. Hunger and the Externalities of Dietary Preferences: Demand-Side Considerations of the Current Dietary Paradigm

    OpenAIRE

    Anastasia Pseiridis

    2012-01-01

    World hunger and the latest increases in global food prices are mainly dealt with by measures aimed at boosting supply and allowing markets to function more effectively. Motivated by the persistence of world hunger, we do not intend to contribute to either theory or empirical analysis in economics; we rather aim to show that current research and policies are locked in a sort of scientific paradigm which takes as given our dietary preferences, which are in fact fundamental in creating resource...

  9. A socio-technical investigation of the smart grid: Implications for demand-side activities of electricity service providers

    Science.gov (United States)

    Corbett, Jacqueline Marie

    Enabled by advanced communication and information technologies, the smart grid represents a major transformation for the electricity sector. Vast quantities of data and two-way communications abilities create the potential for a flexible, data-driven, multi-directional supply and consumption network well equipped to meet the challenges of the next century. For electricity service providers ("utilities"), the smart grid provides opportunities for improved business practices and new business models; however, a transformation of such magnitude is not without risks. Three related studies are conducted to explore the implications of the smart grid on utilities' demand-side activities. An initial conceptual framework, based on organizational information processing theory, suggests that utilities' performance depends on the fit between the information processing requirements and capacities associated with a given demand-side activity. Using secondary data and multiple regression analyses, the first study finds, consistent with OIPT, a positive relationship between utilities' advanced meter deployments and demand-side management performance. However, it also finds that meters with only data collection capacities are associated with lower performance, suggesting the presence of information waste causing operational inefficiencies. In the second study, interviews with industry participants provide partial support for the initial conceptual model, new insights are gained with respect to information processing fit and information waste, and "big data" is identified as a central theme of the smart grid. To derive richer theoretical insights, the third study employs a grounded theory approach examining the experience of one successful utility in detail. Based on interviews and documentary data, the paradox of dynamic stability emerges as an essential enabler of utilities' performance in the smart grid environment. Within this context, the frames of opportunity, control, and data

  10. Demand- and supply-side determinants of diphtheria-pertussis-tetanus nonvaccination and dropout in rural India.

    Science.gov (United States)

    Ghosh, Arpita; Laxminarayan, Ramanan

    2017-02-15

    Although 93% of 12- to 23-month-old children in India receive at least one vaccine, typically Bacillus Calmette-Guérin, only 75% complete the recommended three doses of diphtheria-pertussis-tetanus (DPT, also referred to as DTP) vaccine. Determinants can be different for nonvaccination and dropout but have not been examined in earlier studies. We use the three-dose DPT series as a proxy for the full sequence of recommended childhood vaccines and examine the determinants of DPT nonvaccination and dropout between doses 1 and 3. We analyzed data on 75,728 6- to 23-month-old children in villages across India to study demand- and supply-side factors determining nonvaccination with DPT and dropout between DPT doses 1 and 3, using a multilevel approach. Data come from the District Level Household and Facility Survey 3 (2007-08). Individual- and household-level factors were associated with both DPT nonvaccination and dropout between doses 1 and 3. Children whose mothers had no schooling were 2.3 times more likely not to receive any DPT vaccination and 1.5 times more likely to drop out between DPT doses 1 and 3, compared with children whose mothers had 10 or more years of schooling. Although supply-side factors related to availability of public health facilities and immunization-related health workers in villages were not correlated with dropout between DPT doses 1 and 3, children in districts where 46% or more villages had a healthcare subcentre were 1.5 times more likely to receive at least one dose of DPT vaccine compared with children in districts where 30% or fewer villages had subcentres. Nonvaccination with DPT in India is influenced by village- and district-level contextual factors over and above individuals' background characteristics. Dropout between DPT doses 1 and 3 is associated more strongly with demand-side factors than with village- and district-level supply-side factors. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

  11. Feasibility and potential of thermal demand side management in residential buildings considering different developments in the German energy market

    International Nuclear Information System (INIS)

    Wolisz, Henryk; Punkenburg, Carl; Streblow, Rita; Müller, Dirk

    2016-01-01

    Highlights: • A scenario analysis for the German energy market in the year 2030 is performed. • Growing demand for flexible electric capacities is identified in all scenarios. • Significant potential for domestic demand side management is identified. • A distinct potential for dynamic operation of domestic supply systems is found. • The necessity for a quick introduction of smart metering and control is found. - Abstract: A transition in the electricity market is required to manage the volatility of increasing renewable energy generation. These fluctuations can be faced with flexible consumption through Demand Side Management (DSM), establishment of further centralized storage capacities and provisioning of dynamic back up generation capacities. At least the latter two options can impose large establishment and operation costs upon the electricity market. Therefore, the feasibility and the resulting potential of coupling the electricity grid with the thermal supply of residential buildings is analysed in this paper. Thereby, inexpensive and widespread thermal storage capacities could be used to improve the integration of dynamic renewable electricity generation. In this paper the technical and economical key impact factors for such thermal DSM approach are elaborated. Based on a literature review, the identified key factors are aggregated to form consistent scenarios of the German “Energiewende” (turnaround in energy policy). The practicability and possible magnitude of the intended DSM is then analysed based on the identified scenarios. All resulting scenarios highlight the growing demand for a flexible electricity market. Especially in scenarios with strong growth of renewable electricity generation, up to 45 GW of flexible electric capacities would be required in Germany by the year 2030. Furthermore, the analysis demonstrates that independently of the energy market development, it is very likely that electricity coupled supply systems will

  12. An electric vehicle dispatch module for demand-side energy participation

    International Nuclear Information System (INIS)

    Zhou, Bowen; Yao, Feng; Littler, Tim; Zhang, Huaguang

    2016-01-01

    Highlights: • Real-time measurement and assessment to calculate EV initial state-of-charge (SOC). • Flexible EV charging allocation using measured available time duration (ATD). • Owner participation using mobile phone apps and a new EV dispatch module. • Online algorithm for real-time calculation of maximum and minimum adjustable limits. • Business-trading models with data security, trending and commercial impacts of EV. - Abstract: The penetration of the electric vehicle (EV) has increased rapidly in recent years mainly as a consequence of advances in transport technology and power electronics and in response to global pressure to reduce carbon emissions and limit fossil fuel consumption. It is widely acknowledged that inappropriate provision and dispatch of EV charging can lead to negative impacts on power system infrastructure. This paper considers EV requirements and proposes a module which uses owner participation, through mobile phone apps and on-board diagnostics II (OBD-II), for scheduled vehicle charging. A multi-EV reference and single-EV real-time response (MRS2R) online algorithm is proposed to calculate the maximum and minimum adjustable limits of necessary capacity, which forms part of decision-making support in power system dispatch. The proposed EV dispatch module is evaluated in a case study and the influence of the mobile app, EV dispatch trending and commercial impact is explored.

  13. Lessons learned from new construction utility demand side management programs and their implications for implementing building energy codes

    Energy Technology Data Exchange (ETDEWEB)

    Wise, B.K.; Hughes, K.R.; Danko, S.L.; Gilbride, T.L.

    1994-07-01

    This report was prepared for the US Department of Energy (DOE) Office of Codes and Standards by the Pacific Northwest Laboratory (PNL) through its Building Energy Standards Program (BESP). The purpose of this task was to identify demand-side management (DSM) strategies for new construction that utilities have adopted or developed to promote energy-efficient design and construction. PNL conducted a survey of utilities and used the information gathered to extrapolate lessons learned and to identify evolving trends in utility new-construction DSM programs. The ultimate goal of the task is to identify opportunities where states might work collaboratively with utilities to promote the adoption, implementation, and enforcement of energy-efficient building energy codes.

  14. Electric Boiler and Heat Pump Thermo-Electrical Models for Demand Side Management Analysis in Low Voltage Grids

    DEFF Research Database (Denmark)

    Diaz de Cerio Mendaza, Iker; Bak-Jensen, Birgitte; Chen, Zhe

    2013-01-01

    The last fifteen years many European countries have integrated large percentage of renewable energy on their electricity generation mix. In Denmark the 21.3% of the electricity consumed nowadays is produced by the wind, and it has planned to be the 50% by 2025. In order to front future challenges...... on the power system control and operation, created by this unstable way of generation, Demand Side Management turns to be a promising solution. The storage capacity from thermo-electric units, like electric boilers and heat pumps, allows operating them with certain freedom. Hence they can be employed under...... certain coordination, to actively respond to the power system fluctuations. The following paper presents two simple thermo-electrical models of an electrical boiler and an air-source CO2 heat pump system. The purpose is using them in low voltage grids analysis to assess their capacity and flexibility...

  15. Definitional-mission report: Demand-side management program for the Tenaga Nasional Berhad in Malaysia. Export trade information

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    A definitional mission evaluated the prospects of the US Trade and Development Program (TDP) funding a market demonstration of a Demand Side Management (DSM) program being developed by the Tenaga Nasional Berhad (TNB) in Malaysia. TNB is the national electric utility of Malaysia with the responsibility to promote economically efficient supply of electricity needed for the economic development of Peninsular Malaysia. DSM is a utility-financed program to affect energy savings at the enduse level thereby reducing peak and base loads. Historically, TNB has taken the peak load and the load duration curves as given in planning and implementing the least-cost generation expansion strategy. It has refrained from influencing the pattern of energy use by the customer through any means other than tariff structures and levels. The experience of many utilities with DSM in the U.S. offers TNB an opportunity to develop a suitable DSM program for Malaysia.

  16. What side effects are problematic for patients prescribed antipsychotic medication? The Maudsley Side Effects (MSE) measure for antipsychotic medication.

    Science.gov (United States)

    Wykes, T; Evans, J; Paton, C; Barnes, T R E; Taylor, D; Bentall, R; Dalton, B; Ruffell, T; Rose, D; Vitoratou, S

    2017-10-01

    Capturing service users' perspectives can highlight additional and different concerns to those of clinicians, but there are no up to date, self-report psychometrically sound measures of side effects of antipsychotic medications. Aim To develop a psychometrically sound measure to identify antipsychotic side effects important to service users, the Maudsley Side Effects (MSE) measure. An initial item bank was subjected to a Delphi exercise (n = 9) with psychiatrists and pharmacists, followed by service user focus groups and expert panels (n = 15) to determine item relevance and language. Feasibility and comprehensive psychometric properties were established in two samples (N43 and N50). We investigated whether we could predict the three most important side effects for individuals from their frequency, severity and life impact. MSE is a 53-item measure with good reliability and validity. Poorer mental and physical health, but not psychotic symptoms, was related to side-effect burden. Seventy-nine percent of items were chosen as one of the three most important effects. Severity, impact and distress only predicted 'putting on weight' which was more distressing, more severe and had more life impact in those for whom it was most important. MSE is a self-report questionnaire that identifies reliably the side-effect burden as experienced by patients. Identifying key side effects important to patients can act as a starting point for joint decision making on the type and the dose of medication.

  17. Trade-Induced Atmospheric Mercury Deposition over China and Implications for Demand-Side Controls.

    Science.gov (United States)

    Chen, Long; Meng, Jing; Liang, Sai; Zhang, Haoran; Zhang, Wei; Liu, Maodian; Tong, Yindong; Wang, Huanhuan; Wang, Wei; Wang, Xuejun; Shu, Jiong

    2018-02-20

    Mercury (Hg) is of global concern because of its adverse effects on humans and the environment. In addition to long-range atmospheric transport, Hg emissions can be geographically relocated through economic trade. Here, we investigate the effect of China's interregional trade on atmospheric Hg deposition over China, using an atmospheric transport model and multiregional input-output analysis. In general, total atmospheric Hg deposition over China is 408.8 Mg yr -1 , and 32% of this is embodied in China's interregional trade, with the hotspots occurring over Gansu, Henan, Hebei, and Yunnan provinces. Interprovincial trade considerably redistributes atmospheric Hg deposition over China, with a range in deposition flux from -104% to +28%. Developed regions, such as the Yangtze River Delta (Shanghai, Jiangsu, and Zhejiang) and Guangdong, avoid Hg deposition over their geographical boundaries, instead causing additional Hg deposition over developing provinces. Bilateral interaction among provinces is strong over some regions, suggesting a need for joint mitigation, such as the Jing-Jin-Ji region (Beijing, Tianjin, and Hebei) and the Yangtze River Delta. Transferring advanced technology from developed regions to their developing trade partners would be an effective measure to mitigate China's Hg pollution. Our findings are relevant to interprovincial efforts to reduce trans-boundary Hg pollution in China.

  18. Potential of Demand Side Management to Reduce Carbon Dioxide Emissions Associated with the Operation of Heat Pumps

    Directory of Open Access Journals (Sweden)

    Samuel J. G. Cooper

    2013-06-01

    Full Text Available This work considers the potential reduction in the carbon dioxide emissions associated with the operation of Air Source Heat Pump which could be achieved by using demand side management. In order to achieve significant reductions in carbon dioxide emissions, it is widely envisioned that electrification of the heating sector will need to be combined with decarbonisation of the electrical supply. By influencing the times at when electric heat pumps operate such that they coincide more with electricity generation which has a low marginal carbon emissions factor, it has been suggested that these emissions could be reduced further. In order to investigate this possibility, models of the UK electrical grid based on scenarios for 2020 to 2050 have been combined with a dynamic model of an air source heat pump unit and thermal models of a population of dwellings. The performance and carbon dioxide emissions associated with the heat pumps are compared both with and without demand side management interventions intended to give preference to operation when the marginal emissions factor of the electricity being generated is low. It is found that these interventions are unlikely to be effective at achieving further reductions in emissions. A reduction of around 3% was observed in scenarios based around 2035 but in other scenarios the reduction was insignificant. In the scenarios with high wind generation (2050, the DSM scheme considered here tends to improve thermal comfort (with minimal increases in emissions rather than achieving a decrease in emissions. The reasons for this are discussed and further recommendations are made.

  19. Demand side management in a day-ahead wholesale market: A comparison of industrial & social welfare approaches

    International Nuclear Information System (INIS)

    Jiang, Bo; Farid, Amro M.; Youcef-Toumi, Kamal

    2015-01-01

    Highlights: • We compare two demand side management in a day-ahead electricity wholesale market. • We develop and reconcile social welfare & industrial DSM mathematical models. • We show the industrial netload has an additional forecast quantity of baseline. • We analytically and numerically show the model equivalence with accurate baseline. • We numerically demonstrate the baseline errors lead to higher and costlier dispatch. - Abstract: The intermittent nature of renewable energy has been discussed in the context of the operational challenges that it brings to electrical grid reliability. Demand side management (DSM) with its ability to allow customers to adjust electricity consumption in response to market signals has often been recognized as an efficient way to mitigate the variable effects of renewable energy as well as to increase system efficiency and reduce system costs. However, the academic & industrial literature have taken divergent approaches to DSM implementation. While the popular approach among academia adopts a social welfare maximization formulation, the industrial practice compensates customers according to their load reduction from a predefined electricity consumption baseline that would have occurred without DSM. This paper rigorously compares these two different approaches in a day-ahead wholesale market context analytically and in a test case using the same system configuration and mathematical formalism. The comparison of the two models showed that a proper reconciliation of the two models might make them mitigate the stochastic netload in fundamentally the same way, but only under very specific conditions which are rarely met in practice. While the social welfare model uses a stochastic net load composed of two terms, the industrial DSM model uses a stochastic net load composed of three terms including the additional baseline term. DSM participants are likely to manipulate the baseline in order to receive greater financial

  20. Handbook of evaluation of utility DSM programs. [Demand-Side Management (DSM)

    Energy Technology Data Exchange (ETDEWEB)

    Hirst, E.; Reed, J. (eds.); Bronfman, B.; Fitzpatrick, G.; Hicks, E.; Hirst, E.; Hoffman, M.; Keating, K.; Michaels, H.; Nadel, S.; Peters, J.; Reed, J.; Saxonis, W.; Schoen, A.; Violette, D.

    1991-12-01

    Program evaluation has become a central issue in the world of utility integrated resource planning. The DSM programs that utilities were operating to meet federal requirements or to improve customer relations are now becoming big business. DSM is being considered an important resource in a utility's portfolio of options. In the last five years, the amount of money that utilities have invested in DSM has grown exponentially in most regulatory jurisdictions. Market analysts are now talking about DSM being a $30 billion industry by the end of the decade. If the large volume of DSM-program investments was not enough to highlight the importance of evaluation, then the introduction of regulatory incentives has really focused the spotlight. This handbook was developed through a process that involved many of those people who represent the diverse constituencies of DSM-program evaluation. We have come to recognize the many technical disciplines that must be employed to evaluate DSM programs. An analysis might start out based on the principles of utility load research to find out what happened, but a combination of engineering and statistical methods must be used to triangulate'' an estimate of what would have happened without the program. The difference, of course, is that elusive but prized result of evaluation: what happened as the direct result of the DSM program. Technical performance of DSM measures is not the sole determinant of the answer, either. We also recognize the importance of such behavioral attributes of DSM as persistence and free ridership. Finally, DSM evaluation is meaningless without attention to planning an approach, communicating results to relevant decision-makers, and focusing as much on the process as the impacts of the program. These topics are all covered in this handbook.

  1. Impact of Demand-Side Management on Thermal Comfort and Energy Costs in a Residential nZEB

    Directory of Open Access Journals (Sweden)

    Thibault Q. Péan

    2017-05-01

    Full Text Available In this study, simulation work has been carried out to investigate the impact of a demand-side management control strategy in a residential nZEB. A refurbished apartment within a multi-family dwelling representative of Mediterranean building habits was chosen as a study case and modelled within a simulation framework. A flexibility strategy based on set-point modulation depending on the energy price was applied to the building. The impact of the control strategy on thermal comfort was studied in detail with several methods retrieved from the standards or other literature, differentiating the effects on day and night living zones. It revealed a slight decrease of comfort when implementing flexibility, although this was not prejudicial. In addition, the applied strategy caused a simultaneous increase of the electricity used for heating by up to 7% and a reduction of the corresponding energy costs by up to around 20%. The proposed control thereby constitutes a promising solution for shifting heating loads towards periods of lower prices and is able to provide benefits for both the user and the grid sides. Beyond that, the activation of energy flexibility in buildings (nZEB in the present case will participate in a more successful integration of renewable energy sources (RES in the energy mix.

  2. Metering systems and demand-side management models applied to hybrid renewable energy systems in micro-grid configuration

    International Nuclear Information System (INIS)

    Blasques, L.C.M.; Pinho, J.T.

    2012-01-01

    This paper proposes a demand-side management model integrated to a metering system for hybrid renewable energy systems in micro-grid configuration. The proposal is based on the management problems verified in most of this kind of renewable hybrid systems installed in Brazil. The main idea is the implementation of a pre-paid metering system with some control functions that directly act on the consumer demand, restricting the consumption proportionally to the monthly availability of renewable energy. The result is a better distribution of the electricity consumption by month and by consumer, preventing that only one user, with larger purchasing power, consumes all the renewable energy available at some time period. The proportionality between the consumption and the renewable energy's availability has the objective to prevent a lack of energy stored and a high use of the diesel generator-set on months of low renewable potential. This paper also aims to contribute to the Brazilian regulation of renewable energy systems supplying micro-grids. - Highlights: ► Review of the Brazilian electricity regulation for small-scale isolated systems. ► Renewable systems are the most feasible option in several isolated communities. ► One proposal is to guarantee government subsidies for renewable energy systems. ► Smart electronic meters to create electricity restrictions for the consumers.

  3. Benefits of Demand-Side Response in Providing Frequency Response Service in the Future GB Power System

    Energy Technology Data Exchange (ETDEWEB)

    Teng, Fei, E-mail: fei.teng09@imperial.ac.uk; Aunedi, Marko; Pudjianto, Danny; Strbac, Goran [Department of Electrical and Electronic Engineering, Imperial College London, London (United Kingdom)

    2015-08-18

    The demand for ancillary service is expected to increase significantly in the future Great Britain (GB) electricity system due to high penetration of wind. In particular, the need for frequency response, required to deal with sudden frequency drops following a loss of generator, will increase because of the limited inertia capability of wind plants. This paper quantifies the requirements for primary frequency response and analyses the benefits of frequency response provision from demand-side response (DSR). The results show dramatic changes in frequency response requirements driven by high penetration of wind. Case studies carried out by using an advanced stochastic generation scheduling model suggest that the provision of frequency response from DSR could greatly reduce the system operation cost, wind curtailment, and carbon emissions in the future GB system characterized by high penetration of wind. Furthermore, the results demonstrate that the benefit of DSR shows significant diurnal and seasonal variation, whereas an even more rapid (instant) delivery of frequency response from DSR could provide significant additional value. Our studies also indicate that the competing technologies to DSR, namely battery storage, and more flexible generation could potentially reduce its value by up to 35%, still leaving significant room to deploy DSR as frequency response provider.

  4. Benefits of Demand-Side Response in Providing Frequency Response Service in the Future GB Power System

    International Nuclear Information System (INIS)

    Teng, Fei; Aunedi, Marko; Pudjianto, Danny; Strbac, Goran

    2015-01-01

    The demand for ancillary service is expected to increase significantly in the future Great Britain (GB) electricity system due to high penetration of wind. In particular, the need for frequency response, required to deal with sudden frequency drops following a loss of generator, will increase because of the limited inertia capability of wind plants. This paper quantifies the requirements for primary frequency response and analyses the benefits of frequency response provision from demand-side response (DSR). The results show dramatic changes in frequency response requirements driven by high penetration of wind. Case studies carried out by using an advanced stochastic generation scheduling model suggest that the provision of frequency response from DSR could greatly reduce the system operation cost, wind curtailment, and carbon emissions in the future GB system characterized by high penetration of wind. Furthermore, the results demonstrate that the benefit of DSR shows significant diurnal and seasonal variation, whereas an even more rapid (instant) delivery of frequency response from DSR could provide significant additional value. Our studies also indicate that the competing technologies to DSR, namely battery storage, and more flexible generation could potentially reduce its value by up to 35%, still leaving significant room to deploy DSR as frequency response provider.

  5. Optimisation of key performance measures in air cargo demand management

    OpenAIRE

    Alexander May; Adrian Anslow; Udechukwu Ojiako; Yue Wu; Alasdair Marshall; Maxwell Chipulu

    2014-01-01

    This article sought to facilitate the optimisation of key performance measures utilised for demand management in air cargo operations. The focus was on the Revenue Management team at Virgin Atlantic Cargo and a fuzzy group decision-making method was used. Utilising intelligent fuzzy multi-criteria methods, the authors generated a ranking order of ten key outcome-based performance indicators for Virgin Atlantic air cargo Revenue Management. The result of this industry-driven study showed that ...

  6. Consumer-led demand side financing in health and education and its relevance for low and middle income countries.

    Science.gov (United States)

    Ensor, Tim

    2004-01-01

    There is increasing awareness that supply subsidies for health and education services often fail to benefit those that are most vulnerable in a community. This recognition has led to a growing interest in and experimentation with, consumer-led demand side financing systems (CL-DSF). These mechanisms place purchasing power in the hands of consumers to spend on specific services at accredited facilities. International evidence in education and health sectors suggest a limited success of CL-DSF in raising the consumption of key services amongst priority groups. There is also some evidence that vouchers can be used to improve targeting of vulnerable groups. There is very little positive evidence on the effect of CL-DSF on service quality as a consequence of greater competition. Location of services relative to population means that areas with more provider choice, particularly in the private sector, tend to be dominated by higher and middle-income households. Extending CL-DSF in low-income countries requires the development of capacity in administering these financing schemes and also accrediting providers. Schemes could focus primarily on fixed packages of key services aimed at easily identifiable groups. Piloting and robust evaluation is required to fill the evidence gap on the impact of these mechanisms. Extending demand financing to less predictable services, such as hospital coverage for the population, is likely to require the development of a voucher scheme to purchase insurance. This suggests an already developed insurance market and is unlikely to be appropriate in most low-income countries for some time.

  7. A sustainable development of a city electrical grid via a non-contractual Demand-Side Management

    Science.gov (United States)

    Samoylenko, Vladislav O.; Pazderin, Andrew V.

    2017-06-01

    An increasing energy consumption of large cities as well as an extreme high density of city electrical loads leads to the necessity to search for an alternative approaches to city grid development. The ongoing implementation of the energy accounting tariffs with differentiated rates depending upon the market conditions and changing in a short-term perspective, provide the possibility to use it as a financial incentive base of a Demand-Side Management (DSM). Modern hi-technology energy metering and accounting systems with a large number of functions and consumer feedback are supposed to be the good means of DSM. Existing systems of Smart Metering (SM) billing usually provide general information about consumption curve, bills and compared data, but not the advanced statistics about the correspondence of financial and electric parameters. Also, consumer feedback is usually not fully used. So, the efforts to combine the market principle, Smart Metering and a consumer feedback for an active non-contractual load control are essential. The paper presents the rating-based multi-purpose system of mathematical statistics and algorithms of DSM efficiency estimation useful for both the consumers and the energy companies. The estimation is performed by SM Data processing systems. The system is aimed for load peak shaving and load curve smoothing. It is focused primarily on a retail market support. The system contributes to the energy efficiency and a distribution process improvement by the manual management or by the automated Smart Appliances interaction.

  8. Simulation of the Demand Side Management impacts: resolution enhancement of the input parameters at the local scale

    International Nuclear Information System (INIS)

    Imbert, P.

    2011-01-01

    Following the integrated energy planning paradigm in the 90's and the recent renewal of decentralized energy planning interests, Demand Side Management (DSM) actions are expected to take a significant role on energy planning activities in the future. Indeed the DSM actions represent a relevant option to achieve environmental and energy commitments or to alleviate some specific problems of electricity supply. DSM actions at the local scale at least in the French context is observed today. There is a need for appropriate methods and tools to assess the impacts of such MDE programs at local level. The local scale involves taking into account the specificities of the territories (physical, social, geographical, economical, institutional, etc.) The objective of this thesis is to improve the spatial resolution of input variables for the use in DSM action simulation tools. Based on a case study in France (PREMIO project: smart architecture for load management applied to a district) and an existing simulation tool we will study the impacts of this local experience to several municipalities. (author)

  9. An Algorithmic Game Approach for Demand Side Management in Smart Grid with Distributed Renewable Power Generation and Storage

    Directory of Open Access Journals (Sweden)

    Ren-Shiou Liu

    2016-08-01

    Full Text Available In this paper, the problem of minimizing electricity cost and the peak system load in smart grids with distributed renewable energy resources is studied. Unlike prior research works that either assume all of the jobs are interruptible or power-shiftable, this paper focuses on more challenging scenarios in which jobs are non-interruptible and non-power-shiftable. In addition, as more and more newly-built homes have rooftop solar arrays, it is assumed that all users are equipped with a solar-plus-battery system in this paper. Thus, power can be drawn from the battery as needed to reduce the cost of electricity or to lower the overall system load. With a quadratic load-dependent cost function, this paper first shows that the electricity cost minimization problem in such a setting is NP-hard and presents a distributed demand-side management algorithm, called DDSM, to solve this. Experimental results show that the proposed DDSM algorithm is effective, scalable and converges to a Nash equilibrium in finite rounds.

  10. Economic and environmental impacts from the implementation of an intelligent demand side management system at the European level

    International Nuclear Information System (INIS)

    Papagiannis, G.; Dagoumas, A.; Lettas, N.; Dokopoulos, P.

    2008-01-01

    This paper presents the results of an analysis on the economic and environmental impacts of the application of an intelligent demand side management system, called the Energy Consumption Management System (ECMS), in the European countries. The ECMS can be applied for the control of individual, widely distributed electric loads, using the power distribution network as the command communication channel. The system can be applied in public lighting, in the tertiary and residential sectors, as well as in the industry. A top-down analysis investigates the possible penetration levels in each application area. The long-term impacts following the application of system are evaluated using the LEAP2006 platform. The WASP IV model is also used for the optimization of the power generation expansion and the corresponding calibration of LEAP2006. Several operational strategies combining variable market penetration of the ECMS and expected energy savings are examined. Results show that, under a logical market penetration, a reduction of 1-4% in primary energy, of 1.5-5% in CO 2 emissions and a 2-8% saving in investment costs for power generation expansion is to be expected for the EU-15. The results also justify that innovative devices may be attractive to end users and also help in the implementation of global energy-saving policies

  11. A semi-distributed electric demand-side management system with PV generation for self-consumption enhancement

    International Nuclear Information System (INIS)

    Castillo-Cagigal, M.; Gutierrez, A.; Monasterio-Huelin, F.; Caamano-Martin, E.; Masa, D.; Jimenez-Leube, J.

    2011-01-01

    Highlights: → We have developed a DSM system with PV electricity and battery storage. → To implement the DSM system, we have developed a modular architecture. → Simulations and real experiments have been executed for different weather conditions. → The use of theses technologies increase the self-consumed energy. -- Abstract: This paper presents the operation of an Electrical Demand-Side Management (EDSM) system in a real solar house. The use of EDSM is one of the most important action lines to improve the grid electrical efficiency. The combination between the EDSM and the PV generation performs a new control level in the local electric behavior and allows new energy possibilities. The solar house used as test-bed for the EDSM system owns a PV generator, a lead-acid battery storage system and a grid connection. The electrical appliances are controllable from an embedded computer. The EDSM is implemented by a control system which schedules the tasks commanded by the user. By using the control system, we define the house energy policy and improve the energy behavior with regard to a selected energy criterion, self-consumption. The EDSM system favors self-consumption with regard to a standard user behavior and reduces the energy load from the grid.

  12. Vouchers as demand side financing instruments for health care: a review of the Bangladesh maternal voucher scheme.

    Science.gov (United States)

    Schmidt, Jean-Olivier; Ensor, Tim; Hossain, Atia; Khan, Salam

    2010-07-01

    Demand side financing (DSF) mechanisms transfer purchasing power to specified groups for defined goods and services in order to increase access to specified services. This is an important innovation in health care systems where access remains poor despite substantial subsidies towards the supply side. In Bangladesh, a maternal health DSF pilot in 33 sub-districts was launched in 2007. We report the results of a rapid review of this scheme undertaken during 2008 after 1 year of its setup. Quantitative data collected by DSF committees, facilities and national information systems were assessed alongside qualitative data, i.e. key informant interviews and focus group discussions with beneficiaries and health service providers on the operation of the scheme in 6 sub-districts. The scheme provides vouchers to women distributed by health workers that entitle mainly poor women to receive skilled care at home or a facility and also provide payments for transport and food. After initial setbacks voucher distribution rose quickly. The data also suggest that the rise in facility based delivery appeared to be more rapid in DSF than in other non-DSF areas, although the methods do not allow for a strict causal attribution as there might be co-founding effects. Fears that the financial incentives for surgical delivery would lead to an over emphasis on Caesarean section appear to be unfounded although the trends need further monitoring. DSF provides substantial additional funding to facilities but remains complex to administer, requiring a parallel administrative mechanism putting additional work burden on the health workers. There is little evidence that the mechanism encourages competition due to the limited provision of health care services. The main question outstanding is whether the achievements of the DSF scheme could be achieved more efficiently by adapting the regular government funding rather than creating an entirely new mechanism. Also, improving the quality of health

  13. Construct Validity of Measures of Becker's Side Bet Theory.

    Science.gov (United States)

    Shore, Lynn M.; Tetrick, Lois E.; Shore, Ted H.; Barksdale, Kevin

    2000-01-01

    Becker's side bet theory (remaining in a job because of perceived costs of leaving) was tested using data from 327 working business students. Three factors were most consistent with the theory: bureaucratic organization, nonwork-related concerns, and adjustment to social position. Attachment to the organization was significantly linked to tangible…

  14. An evaluation of two large scale demand side financing programs for maternal health in India: the MATIND study protocol

    Directory of Open Access Journals (Sweden)

    Sidney Kristi

    2012-08-01

    Full Text Available Abstract Background High maternal mortality in India is a serious public health challenge. Demand side financing interventions have emerged as a strategy to promote access to emergency obstetric care. Two such state run programs, Janani Suraksha Yojana (JSYand Chiranjeevi Yojana (CY, were designed and implemented to reduce financial access barriers that preclude women from obtaining emergency obstetric care. JSY, a conditional cash transfer, awards money directly to a woman who delivers in a public health facility. This will be studied in Madhya Pradesh province. CY, a voucher based program, empanels private obstetricians in Gujarat province, who are reimbursed by the government to perform deliveries of socioeconomically disadvantaged women. The programs have been in operation for the last seven years. Methods/designs The study outlined in this protocol will assess and compare the influence of the two programs on various aspects of maternal health care including trends in program uptake, institutional delivery rates, maternal and neonatal outcomes, quality of care, experiences of service providers and users, and cost effectiveness. The study will collect primary data using a combination of qualitative and quantitative methods, including facility level questionnaires, observations, a population based survey, in-depth interviews, and focus group discussions. Primary data will be collected in three districts of each province. The research will take place at three levels: the state health departments, obstetric facilities in the districts and among recently delivered mothers in the community. Discussion The protocol is a comprehensive assessment of the performance and impact of the programs and an economic analysis. It will fill existing evidence gaps in the scientific literature including access and quality to services, utilization, coverage and impact. The implementation of the protocol will also generate evidence to facilitate decision making

  15. Novel effects of demand side management data on accuracy of electrical energy consumption modeling and long-term forecasting

    International Nuclear Information System (INIS)

    Ardakani, F.J.; Ardehali, M.M.

    2014-01-01

    Highlights: • Novel effects of DSM data on electricity consumption forecasting is examined. • Optimal ANN models based on IPSO and SFL algorithms are developed. • Addition of DSM data to socio-economic indicators data reduces MAPE by 36%. - Abstract: Worldwide implementation of demand side management (DSM) programs has had positive impacts on electrical energy consumption (EEC) and the examination of their effects on long-term forecasting is warranted. The objective of this study is to investigate the effects of historical DSM data on accuracy of EEC modeling and long-term forecasting. To achieve the objective, optimal artificial neural network (ANN) models based on improved particle swarm optimization (IPSO) and shuffled frog-leaping (SFL) algorithms are developed for EEC forecasting. For long-term EEC modeling and forecasting for the U.S. for 2010–2030, two historical data types used in conjunction with developed models include (i) EEC and (ii) socio-economic indicators, namely, gross domestic product, energy imports, energy exports, and population for 1967–2009 period. Simulation results from IPSO-ANN and SFL-ANN models show that using socio-economic indicators as input data achieves lower mean absolute percentage error (MAPE) for long-term EEC forecasting, as compared with EEC data. Based on IPSO-ANN, it is found that, for the U.S. EEC long-term forecasting, the addition of DSM data to socio-economic indicators data reduces MAPE by 36% and results in the estimated difference of 3592.8 MBOE (5849.9 TW h) in EEC for 2010–2030

  16. An evaluation of two large scale demand side financing programs for maternal health in India: the MATIND study protocol.

    Science.gov (United States)

    Sidney, Kristi; de Costa, Ayesha; Diwan, Vishal; Mavalankar, Dileep V; Smith, Helen

    2012-08-27

    High maternal mortality in India is a serious public health challenge. Demand side financing interventions have emerged as a strategy to promote access to emergency obstetric care. Two such state run programs, Janani Suraksha Yojana (JSY)and Chiranjeevi Yojana (CY), were designed and implemented to reduce financial access barriers that preclude women from obtaining emergency obstetric care. JSY, a conditional cash transfer, awards money directly to a woman who delivers in a public health facility. This will be studied in Madhya Pradesh province. CY, a voucher based program, empanels private obstetricians in Gujarat province, who are reimbursed by the government to perform deliveries of socioeconomically disadvantaged women. The programs have been in operation for the last seven years. The study outlined in this protocol will assess and compare the influence of the two programs on various aspects of maternal health care including trends in program uptake, institutional delivery rates, maternal and neonatal outcomes, quality of care, experiences of service providers and users, and cost effectiveness. The study will collect primary data using a combination of qualitative and quantitative methods, including facility level questionnaires, observations, a population based survey, in-depth interviews, and focus group discussions. Primary data will be collected in three districts of each province. The research will take place at three levels: the state health departments, obstetric facilities in the districts and among recently delivered mothers in the community. The protocol is a comprehensive assessment of the performance and impact of the programs and an economic analysis. It will fill existing evidence gaps in the scientific literature including access and quality to services, utilization, coverage and impact. The implementation of the protocol will also generate evidence to facilitate decision making among policy makers and program managers who currently work with or

  17. DEMONSTRATION OF THE ENVIRONMENTAL AND DEMAND-SIDE MANAGEMENT BENEFITS OF GRID-CONNECTED PHOTOVOLTAIC POWER SYSTEMS SITED ON MILITARY BASES

    Science.gov (United States)

    The report gives results of an investigation into the pollutant emission reduction and demand-side management potential of three photovoltaic (PV) systems installed at Ft. Huachuca, AZ, Ft. Dix, NJ, and Hickam Air Force Base, HI, which began operation between January and July 199...

  18. Demand-Side Financing--A Focus on Vouchers in Post-Compulsory Education and Training: Discussion Paper and Case Studies. CEDEFOP Dossier.

    Science.gov (United States)

    West, Anne; Sparkes, Jo; Balabanov, Todor

    The use of demand-side financing mechanisms and vouchers for postcompulsory secondary-level education was examined through case studies of funding practices in the following countries: Austria; France; the United Kingdom; the United States; and Wallonia (the French community of Belgium). Different models of voucher use were identified in the…

  19. Electricity decision-making: New techniques for calculating statewide economic impacts from new power supply and demand-side management programs

    Science.gov (United States)

    Tegen, Suzanne Isabel Helmholz

    This dissertation introduces new techniques for calculating and comparing statewide economic impacts from new coal, natural gas and wind power plants, as well as from demand-side management programs. The impetus for this work was two-fold. First, reviews of current literature and projects revealed that there was no standard way to estimate statewide economic impacts from new supply- and demand-side electricity options. Second, decision-makers who were interviewed stated that they were overwhelmed with data in general, but also lacked enough specific information about economic development impacts to their states from electricity, to make informed choices. This dissertation includes chapters on electricity decision-making and on economic impacts from supply and demand. The supply chapter compares different electricity options in three states which vary in natural resource content: Arizona, Colorado and Michigan. To account for differing capacity factors, resources are compared on a per-megawatt-hour basis. The calculations of economic impacts from new supply include: materials and labor for construction, operations, maintenance, fuel extraction, fuel transport, as well as property tax, financing and landowner revenues. The demand-side chapter compares residential, commercial and industrial programs in Iowa. Impact calculations include: incremental labor and materials for program planning, installation and operations, as well as sales taxes and electricity saved. Results from supply-side calculations in the three states analyzed indicate that adding new wind power can have a greater impact to a state's economy than adding new gas or coal power due to resource location, taxes and infrastructure. Additionally, demand-side management programs have a higher relative percentage of in-state dollar flow than supply-side solutions, though demand-side programs typically involve fewer MWh and dollars than supply-side generation. Methods for this dissertation include researching

  20. Facultative Stabilization Pond: Measuring Biological Oxygen Demand using Mathematical Approaches

    Science.gov (United States)

    Wira S, Ihsan; Sunarsih, Sunarsih

    2018-02-01

    Pollution is a man-made phenomenon. Some pollutants which discharged directly to the environment could create serious pollution problems. Untreated wastewater will cause contamination and even pollution on the water body. Biological Oxygen Demand (BOD) is the amount of oxygen required for the oxidation by bacteria. The higher the BOD concentration, the greater the organic matter would be. The purpose of this study was to predict the value of BOD contained in wastewater. Mathematical modeling methods were chosen in this study to depict and predict the BOD values contained in facultative wastewater stabilization ponds. Measurements of sampling data were carried out to validate the model. The results of this study indicated that a mathematical approach can be applied to predict the BOD contained in the facultative wastewater stabilization ponds. The model was validated using Absolute Means Error with 10% tolerance limit, and AME for model was 7.38% (< 10%), so the model is valid. Furthermore, a mathematical approach can also be applied to illustrate and predict the contents of wastewater.

  1. Optimisation of key performance measures in air cargo demand management

    Directory of Open Access Journals (Sweden)

    Alexander May

    2014-04-01

    Full Text Available This article sought to facilitate the optimisation of key performance measures utilised for demand management in air cargo operations. The focus was on the Revenue Management team at Virgin Atlantic Cargo and a fuzzy group decision-making method was used. Utilising intelligent fuzzy multi-criteria methods, the authors generated a ranking order of ten key outcome-based performance indicators for Virgin Atlantic air cargo Revenue Management. The result of this industry-driven study showed that for Air Cargo Revenue Management, ‘Network Optimisation’ represents a critical outcome-based performance indicator. This collaborative study contributes to existing logistics management literature, especially in the area of Revenue Management, and it seeks to enhance Revenue Management practice. It also provides a platform for Air Cargo operators seeking to improve reliability values for their key performance indicators as a means of enhancing operational monitoring power.

  2. Conceptualizing and measuring demand for recreation on national forests: a review and synthesis.

    Science.gov (United States)

    Brian E. Garber-Yonts

    2005-01-01

    This analysis examines the problem of measuring demand for recreation on national forests and other public lands. Current measures of recreation demand in Forest Service resource assessments and planning emphasize population-level participation rates and activity-based economic values for visitor days. Alternative measures and definitions of recreation demand are...

  3. Manual or automated measuring of antipsychotics' chemical oxygen demand.

    Science.gov (United States)

    Pereira, Sarah A P; Costa, Susana P F; Cunha, Edite; Passos, Marieta L C; Araújo, André R S T; Saraiva, M Lúcia M F S

    2018-05-15

    Antipsychotic (AP) drugs are becoming accumulated in terrestrial and aqueous resources due to their actual consumption. Thus, the search of methods for assessing the contamination load of these drugs is mandatory. The COD is a key parameter used for monitoring water quality upon the assessment of the effect of polluting agents on the oxygen level. Thus, the present work aims to assess the chemical oxygen demand (COD) levels of several typical and atypical antipsychotic drugs in order to obtain structure-activity relationships. It was implemented the titrimetric method with potassium dichromate as oxidant and a digestion step of 2h, followed by the measurement of remained unreduced dichromate by titration. After that, an automated sequential injection analysis (SIA) method was, also, used aiming to overcome some drawbacks of the titrimetric method. The results obtained showed a relationship between the chemical structures of antipsychotic drugs and their COD values, where the presence of aromatic rings and oxidable groups give higher COD values. It was obtained a good compliance between the results of the reference batch procedure and the SIA system, and the APs were clustered in two groups, with the values ratio between the methodologies, of 2 or 4, in the case of lower or higher COD values, respectively. The SIA methodology is capable of operating as a screening method, in any stage of a synthetic process, being also more environmentally friendly, and cost-effective. Besides, the studies presented open promising perspectives for the improvement of the effectiveness of pharmaceutical removal from the waste effluents, by assessing COD values. Copyright © 2018 Elsevier Inc. All rights reserved.

  4. Small-Sided Games : An Optimal Training Tool to Represent Tactical Match Demands in Elite-Standard Youth Soccer Players?

    NARCIS (Netherlands)

    Olthof, S. B. H.; Frencken, W. G. P.; Lemmink, K. A. P. M.

    2016-01-01

    Small-sided games are an often used training tool in soccer practices. It has proven to provide a simultaneous physical, technical and tactical training stimulus for soccer players[1]. Small-sided games replicate the tactical character of a match, but in a simplified format with reductions in number

  5. Response of residential electricity demand to price: The effect of measurement error

    International Nuclear Information System (INIS)

    Alberini, Anna; Filippini, Massimo

    2011-01-01

    In this paper we present an empirical analysis of the residential demand for electricity using annual aggregate data at the state level for 48 US states from 1995 to 2007. Earlier literature has examined residential energy consumption at the state level using annual or monthly data, focusing on the variation in price elasticities of demand across states or regions, but has failed to recognize or address two major issues. The first is that, when fitting dynamic panel models, the lagged consumption term in the right-hand side of the demand equation is endogenous. This has resulted in potentially inconsistent estimates of the long-run price elasticity of demand. The second is that energy price is likely mismeasured. To address these issues, we estimate a dynamic partial adjustment model using the Kiviet corrected Least Square Dummy Variables (LSDV) (1995) and the Blundell-Bond (1998) estimators. We find that the long-term elasticities produced by the Blundell-Bond system GMM methods are largest, and that from the bias-corrected LSDV are greater than that from the conventional LSDV. From an energy policy point of view, the results obtained using the Blundell-Bond estimator where we instrument for price imply that a carbon tax or other price-based policy may be effective in discouraging residential electricity consumption and hence curbing greenhouse gas emissions in an electricity system mainly based on coal and gas power plants. - Research Highlights: → Updated information on price elasticities for the US energy policy. → Taking into account measurement error in the price variable increase price elasticity. → Room for discouraging residential electricity consumption using price increases.

  6. Response of residential electricity demand to price: The effect of measurement error

    Energy Technology Data Exchange (ETDEWEB)

    Alberini, Anna [Department of Agricultural Economics, University of Maryland (United States); Centre for Energy Policy and Economics (CEPE), ETH Zurich (Switzerland); Gibson Institute and Institute for a Sustainable World, School of Biological Sciences, Queen' s University Belfast, Northern Ireland (United Kingdom); Filippini, Massimo, E-mail: mfilippini@ethz.ch [Centre for Energy Policy and Economics (CEPE), ETH Zurich (Switzerland); Department of Economics, University of Lugano (Switzerland)

    2011-09-15

    In this paper we present an empirical analysis of the residential demand for electricity using annual aggregate data at the state level for 48 US states from 1995 to 2007. Earlier literature has examined residential energy consumption at the state level using annual or monthly data, focusing on the variation in price elasticities of demand across states or regions, but has failed to recognize or address two major issues. The first is that, when fitting dynamic panel models, the lagged consumption term in the right-hand side of the demand equation is endogenous. This has resulted in potentially inconsistent estimates of the long-run price elasticity of demand. The second is that energy price is likely mismeasured. To address these issues, we estimate a dynamic partial adjustment model using the Kiviet corrected Least Square Dummy Variables (LSDV) (1995) and the Blundell-Bond (1998) estimators. We find that the long-term elasticities produced by the Blundell-Bond system GMM methods are largest, and that from the bias-corrected LSDV are greater than that from the conventional LSDV. From an energy policy point of view, the results obtained using the Blundell-Bond estimator where we instrument for price imply that a carbon tax or other price-based policy may be effective in discouraging residential electricity consumption and hence curbing greenhouse gas emissions in an electricity system mainly based on coal and gas power plants. - Research Highlights: > Updated information on price elasticities for the US energy policy. > Taking into account measurement error in the price variable increase price elasticity. > Room for discouraging residential electricity consumption using price increases.

  7. Current status of and problems in ice heat storage systems contributing to improving load rate. Positive development of proliferation and expanded use measures as support of demand side management (DSM) activity (Tokyo Electric Power Co. Inc.); Fukaritsu kaizen ni kokensuru kori chikunetsu system no genjo to kadai. DSM katsudo no hashira to shite fukyu kakudaisaku wo sekkyoku tenkai (Tokyo Denryoku)

    Energy Technology Data Exchange (ETDEWEB)

    Masuda, H. [Tokyo Electric Power Co. Inc., Tokyo (Japan)

    1998-02-01

    This paper introduces activities performed by Tokyo Electric Power Co., Inc. on ice heat storage systems. In the summer power peak in the Tokyo Electric Power area during fiscal 1996, the peak time, in which power was consumed in excess of 57 million kW, was only nine hours out of the annual supply time of 8760 hours. In other words, power generated by two large power plants is necessary for the nine hours, reducing the operation rate (load rate) of the power supply facilities. Therefore, Tokyo Electric Power has positioned the heat storage type air conditioning system as the center of the DSM activity, and is working on its proliferation and expanded use. An ice heat storage multi-air conditioner and a package air conditioner which can be installed in small buildings, and can deal with needs of individual discrete air conditioning were developed jointly with other electric power companies and device manufacturers. As a result, a commercial product called `Eco-Ice` made a debut. Since June 1997, the facilities subjected to commission in the `heat storage commission system` have been expanded to the heat source side facilities at customers to reduce initial capital investment. 5 figs., 1 tab.

  8. Film cooling adiabatic effectiveness measurements of pressure side trailing edge cooling configurations

    Directory of Open Access Journals (Sweden)

    R. Becchi

    2015-12-01

    Full Text Available Nowadays total inlet temperature of gas turbine is far above the permissible metal temperature; as a consequence, advanced cooling techniques must be applied to protect from thermal stresses, oxidation and corrosion the components located in the high pressure stages, such as the blade trailing edge. A suitable design of the cooling system for the trailing edge has to cope with geometric constraints and aerodynamic demands; state-of-the-art of cooling concepts often use film cooling on blade pressure side: the air taken from last compressor stages is ejected through discrete holes or slots to provide a cold layer between hot mainstream and the blade surface. With the goal of ensuring a satisfactory lifetime of blades, the design of efficient trailing edge film cooling schemes and, moreover, the possibility to check carefully their behavior, are hence necessary to guarantee an appropriate metal temperature distribution. For this purpose an experimental survey was carried out to investigate the film covering performance of different pressure side trailing edge cooling systems for turbine blades. The experimental test section consists of a scaled-up trailing edge model installed in an open loop suction type test rig. Measurements of adiabatic effectiveness distributions were carried out on three trailing edge cooling system configurations. The baseline geometry is composed by inclined slots separated by elongated pedestals; the second geometry shares the same cutback configuration, with an additional row of circular film cooling holes located upstream; the third model is equipped with three rows of in-line film cooling holes. Experiments have been performed at nearly ambient conditions imposing several blowing ratio values and using carbon dioxide as coolant in order to reproduce a density ratio close to the engine conditions (DR=1.52. To extend the validity of the survey a comparison between adiabatic effectiveness measurements and a prediction by

  9. The making of a market. Supply- and demand-side perspectives on institutional innovation in Sweden's wood fuel use

    International Nuclear Information System (INIS)

    2001-01-01

    This thesis documents and analyses the rapidly increasing wood fuel use in Sweden in five separate studies of prominent actors in the making of the wood fuel market. These studies report government policy, forest owners' incentives, and district heating companies' experiences. The development of wood fuel use is examined as a story of technological and institutional change initially prompted by government policy. The change has involved dedicated action among all of the actors, with the Swedish government initiating new policies, legislation, and information activities, with district heating companies investing in new technology and trading, and with forest owners making new decisions on forest management practices. Institutional change in the wood fuel sector, in other words, is the result of innovation on the part of the actors involved. The papers included in the study identify and analyse concerns of the actors involved in making the wood fuel market. Within the district heating sector, transaction costs, as measured by problems to trade perceived by managements, have decreased with learning. Transformation costs, due to technical problems, are not perceived to have followed this trend. Technical investments in heat production have a long technical life time and demand large investment costs. This in turn means long planning and decision periods. Investments are made for a number of company-specific reasons, perhaps most importantly simply to increase heat and/or electricity generation capacity. Policy instruments may tip a decision in favor of wood fuels, but they could not be the single parameter determining company investments. Two kinds of forest owners selling wood fuels were identified, a forest manager type who acts more on his/her own initiative, and another kind, who relies more on the advice of the traditional timber buyer. Forest owners selling wood fuels contemplating whether to sell wood fuels or not are strongly influenced by soil fertility

  10. Measuring political polarization: Twitter shows the two sides of Venezuela

    Science.gov (United States)

    Morales, A. J.; Borondo, J.; Losada, J. C.; Benito, R. M.

    2015-03-01

    We say that a population is perfectly polarized when divided in two groups of the same size and opposite opinions. In this paper, we propose a methodology to study and measure the emergence of polarization from social interactions. We begin by proposing a model to estimate opinions in which a minority of influential individuals propagate their opinions through a social network. The result of the model is an opinion probability density function. Next, we propose an index to quantify the extent to which the resulting distribution is polarized. Finally, we apply the proposed methodology to a Twitter conversation about the late Venezuelan president, Hugo Chávez, finding a good agreement between our results and offline data. Hence, we show that our methodology can detect different degrees of polarization, depending on the structure of the network.

  11. Participation in Non-Formal Learning in EU-15 and EU-8 Countries: Demand and Supply Side Factors

    Science.gov (United States)

    Roosmaa, Eve-Liis; Saar, Ellu

    2012-01-01

    The main purpose of this paper is to provide an in-depth analysis of participation in non-formal learning in different European Union member states. The paper also seeks to extend analysis of the training gap by pursuing the distinction between the supply and the demand for skills. We use aggregate data from the Adult Education Survey (Eurostat)…

  12. Hawaii demand-side management resource assessment. Final report, Reference Volume 3 -- Residential and commercial sector DSM analyses: Detailed results from the DBEDT DSM assessment model; Part 1, Technical potential

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-04-01

    The Hawaii Demand-Side Management Resource Assessment was the fourth of seven projects in the Hawaii Energy Strategy (HES) program. HES was designed by the Department of Business, Economic Development, and Tourism (DBEDT) to produce an integrated energy strategy for the State of Hawaii. The purpose of Project 4 was to develop a comprehensive assessment of Hawaii`s demand-side management (DSM) resources. To meet this objective, the project was divided into two phases. The first phase included development of a DSM technology database and the identification of Hawaii commercial building characteristics through on-site audits. These Phase 1 products were then used in Phase 2 to identify expected energy impacts from DSM measures in typical residential and commercial buildings in Hawaii. The building energy simulation model DOE-2.1E was utilized to identify the DSM energy impacts. More detailed information on the typical buildings and the DOE-2.1E modeling effort is available in Reference Volume 1, ``Building Prototype Analysis``. In addition to the DOE-2.1E analysis, estimates of residential and commercial sector gas and electric DSM potential for the four counties of Honolulu, Hawaii, Maui, and Kauai through 2014 were forecasted by the new DBEDT DSM Assessment Model. Results from DBEDTs energy forecasting model, ENERGY 2020, were linked with results from DOE-2.1E building energy simulation runs and estimates of DSM measure impacts, costs, lifetime, and anticipated market penetration rates in the DBEDT DSM Model. Through its algorithms, estimates of DSM potential for each forecast year were developed. Using the load shape information from the DOE-2.1E simulation runs, estimates of electric peak demand impacts were developed. Numerous tables and figures illustrating the technical potential for demand-side management are included.

  13. Technical and physical demands of small vs. large sided games in relation to playing position in elite soccer

    DEFF Research Database (Denmark)

    Dellal, A; Owen, A; Wong, D P

    2012-01-01

    positional roles participated in the study (25.3±2.4years, 182.4±2.3cm, 77.3±4.1kg; M±SD). Players completed three different conditioned small-sided 4 vs. 4 games (1 ball touch=1T, 2 ball touches=2T and Free Play=FP) as well as two friendly matches. Heart rate (HR), blood lactate ([La]), ratings of perceived...

  14. THE CONTENT OF AN ECONOMIC CATEGORY AND THE MEASUREMENT OF THE MARKET DEMAND

    Directory of Open Access Journals (Sweden)

    Anatoly V. Korotkov

    2014-01-01

    Full Text Available The aim of the article is to study the economic and statistical categories and levels of consumer demand. There is no uniformity in the interpretation of the content of an economic category and demand level in the literature on the economic theory and applied research of the market. We want to conduct the verification of the demand category, a consolidation of the wording of measuring the level of demand, the classification of demand. Theoretical basis of the conducted research is the methodology of the economic theory and the general theory of statistics.

  15. Influence of the Type of Marking and the Number of Players on Physiological and Physical Demands During Sided Games in Soccer

    Directory of Open Access Journals (Sweden)

    Casamichana David

    2015-09-01

    Full Text Available The aim of this research was to examine the influence of two variables, the type of marking (with or without man-marking and the number of players per team (3, 6, or 9 on the physical and physiological demands of sided games in soccer. Eighteen amateur players were monitored with GPS and heart rate devices. The following variables were analyzed: a maximum heart rate, a mean heart rate, time spent in each intensity range, total distance covered and distance covered in different speed ranges, a player load, maximum speed reached, and a work:rest ratio. The results showed that the type of marking influenced the physical demands of players, with greater total distance, a player load and a work:rest ratio when man-marking was used in the 3 vs. 3 (737 m, 95 Arbitrary Units (AU and 3.4 AU, respectively and 6 vs. 6 (783 m, 95 AU and 5.3 AU, respectively games (p<0.05. The number of players also had an effect on physiological intensity, with more time being spent at the <80%HRmax during the 9 vs. 9 and 6 vs. 6 games (more than 30% compared with the 3 vs. 3 format (less than 15% (p<0.05. These findings could help coaches to understand how the modification of different variables in sided games influences the physical and physiological demands of players.

  16. Objective assessment of actual chewing side by measurement of bilateral masseter muscle electromyography.

    Science.gov (United States)

    Yamasaki, Yo; Kuwatsuru, Rika; Tsukiyama, Yoshihiro; Matsumoto, Hiroshi; Oki, Kyosuke; Koyano, Kiyoshi

    2015-12-01

    The aim of this study was to examine the validity of objective assessment of actual chewing side by measurement of electromyographic (EMG) activity of the bilateral masseter muscles upon chewing test foods. The sample consisted of 19 healthy, dentate individuals. The subjects were asked to chew three types of test foods (peanuts, beef jerky, and chewing gum) for 10 strokes on the right side and then on the left side, and instructed to perform maximum voluntary clenching for 3s, three times. EMG activity from the bilateral masseter muscles was recorded. The data were collected in three different days. The root mean square EMG amplitude obtained from the maximum clenching task was used as the maximum voluntary contraction (MVC). Then, the level of amplitude against the MVC (%MVC) was calculated for the right and left sides on each stroke. The side with the larger %MVC value was judged as the chewing side, and the concordance rates (CRs) for the instructed chewing side (ICS) and the judged chewing side (JCS) were calculated. Intraclass correlation coefficients (ICCs) of the CRs were calculated to evaluate the reproducibility of the method. High CRs between the ICS and JCS for each test food were recognized. There were significant ICCs for beef jerky (R=0.761, Pchewing gum (R=0.785, Pchewing side during mastication. Copyright © 2015 Elsevier Ltd. All rights reserved.

  17. How are investment decisions in the steam coal market affected by demand uncertainty and buyer-side market power?

    Energy Technology Data Exchange (ETDEWEB)

    Paulus, Moritz

    2012-02-15

    During the last decade, China has evolved into the largest consumer by far and one of the largest importers of coal. The main driver for the increase in coal demand in China has been economic growth. Future Chinese growth rates, and therefore coal consumption and coal imports, are highly uncertain, which may affect profitability of new investments of international mining companies. Furthermore, China has actively employed an array of instruments to control coal trade flows in the last years. In this paper, we analyse the potential impact of increased Chinese coal import volatility and of potential exertion of Chinese market power on global mining investment decisions. For this purpose, we develop a multi-stage stochastic equilibrium model which is able to simulate investments under uncertainty and a monopolistic player in addition to a competitive fringe. We find that accounting for Chinese demand uncertainty yields significant costs for investors and also leads to a delay in investments. Additionally, the exertion of Chinese market power further reduces overall investment activity.

  18. An Efficient Demand Side Management System with a New Optimized Home Energy Management Controller in Smart Grid

    Directory of Open Access Journals (Sweden)

    Hafiz Majid Hussain

    2018-01-01

    Full Text Available The traditional power grid is inadequate to overcome modern day challenges. As the modern era demands the traditional power grid to be more reliable, resilient, and cost-effective, the concept of smart grid evolves and various methods have been developed to overcome these demands which make the smart grid superior over the traditional power grid. One of the essential components of the smart grid, home energy management system (HEMS enhances the energy efficiency of electricity infrastructure in a residential area. In this aspect, we propose an efficient home energy management controller (EHEMC based on genetic harmony search algorithm (GHSA to reduce electricity expense, peak to average ratio (PAR, and maximize user comfort. We consider EHEMC for a single home and multiple homes with real-time electricity pricing (RTEP and critical peak pricing (CPP tariffs. In particular, for multiple homes, we classify modes of operation for the appliances according to their energy consumption with varying operation time slots. The constrained optimization problem is solved using heuristic algorithms: wind-driven optimization (WDO, harmony search algorithm (HSA, genetic algorithm (GA, and proposed algorithm GHSA. The proposed algorithm GHSA shows higher search efficiency and dynamic capability to attain optimal solutions as compared to existing algorithms. Simulation results also show that the proposed algorithm GHSA outperforms the existing algorithms in terms of reduction in electricity cost, PAR, and maximize user comfort.

  19. How are investment decisions in the steam coal market affected by demand uncertainty and buyer-side market power?

    International Nuclear Information System (INIS)

    Paulus, Moritz

    2012-01-01

    During the last decade, China has evolved into the largest consumer by far and one of the largest importers of coal. The main driver for the increase in coal demand in China has been economic growth. Future Chinese growth rates, and therefore coal consumption and coal imports, are highly uncertain, which may affect profitability of new investments of international mining companies. Furthermore, China has actively employed an array of instruments to control coal trade flows in the last years. In this paper, we analyse the potential impact of increased Chinese coal import volatility and of potential exertion of Chinese market power on global mining investment decisions. For this purpose, we develop a multi-stage stochastic equilibrium model which is able to simulate investments under uncertainty and a monopolistic player in addition to a competitive fringe. We find that accounting for Chinese demand uncertainty yields significant costs for investors and also leads to a delay in investments. Additionally, the exertion of Chinese market power further reduces overall investment activity.

  20. Low-enthalpy geothermal resources for electricity production: A demand-side management study for intelligent communities

    DEFF Research Database (Denmark)

    Xydis, George A.; Nanaki, Evanthia A.; Koroneos, Christopher J.

    2013-01-01

    The geological conditions in Greece contributed to the creation of important low-enthalpy geothermal energy resources (LEGERs). The resources are divided into low, medium and high enthalpy, or temperature, based on criteria that are generally based on the energy content of the fluid. LEGERs...... and northern part of the country, as well as in many of the Aegean Islands. The aim of this work is to review the options for managing wind load by using low-enthalpy geothermal energy for electricity (through heat pump utilisation) according to the local energy demand....... are those sources of the hot water whose temperature is between 25 and 100°C, which are used for heating residences and in the agricultural or industrial sector. The investigation for the exploitation of low-enthalpy geothermal fluids, which began around 1980, intensified in the last two decades. The low...

  1. Spatial heterogeneity in utilities, equity and collective efficiency: the case of rural electrification and demand side management

    International Nuclear Information System (INIS)

    Nadaud, F.

    2005-11-01

    This thesis has for object the evolution of the economic optimum in the electric industry under spatial equity constraint that present a strong spatial heterogeneity of its supply conditions. One analyses the evolution of the rural electrification regime in France both in terms of economic and social efficiency. We examine the rationality of extending the sectoral optimization under equity constraint to the rationalization of electricity end-uses in the heterogeneous space of rural electricity supply. To this question are given two responses. The firsts pertains to modify the incentives in the institutional regime of rural electrification so the MDE may be integrated in the strategies of rural electrification syndicates. One inspire from incentives mechanisms of the anglo-saxon DSM practice. The second is statistical zoning method of demand and distribution grid whose object is to localize action basins for large scale MDE projects. (author)

  2. Low-enthalpy geothermal resources for electricity production: A demand-side management study for intelligent communities

    International Nuclear Information System (INIS)

    Xydis, George A.; Nanaki, Evanthia A.; Koroneos, Christopher J.

    2013-01-01

    The geological conditions in Greece contributed to the creation of important low-enthalpy geothermal energy resources (LEGERs). The resources are divided into low, medium and high enthalpy, or temperature, based on criteria that are generally based on the energy content of the fluid. LEGERs are those sources of the hot water whose temperature is between 25 and 100 °C, which are used for heating residences and in the agricultural or industrial sector. The investigation for the exploitation of low-enthalpy geothermal fluids, which began around 1980, intensified in the last two decades. The low-enthalpy geothermal potential in Greece is rather significant as most of the geothermal fields have been found in regions with favourable developmental conditions, and it seems that they do not present serious environmental or technical exploitation problems. LEGER areas are abundant in Greece, mainly in the eastern and northern part of the country, as well as in many of the Aegean Islands. The aim of this work is to review the options for managing wind load by using low-enthalpy geothermal energy for electricity (through heat pump utilisation) according to the local energy demand. -- Highlights: •Approximately 45.43 GWh per year of electricity can be covered from low-enthalpy geothermal energy resources (LEGERs). •In particular, 10% of the electricity demand can be covered from the LEGER N. Kessani (NK). •The needs for LEGER contribution were increased when wind turbine (WT) production was low. •In winter, where there is abundance of wind, LEGER can be used mostly for heating. •During summer, LEGER can assist more in electricity when heating is not needed

  3. Smart grids, demand-side management and decentralised electricity production: Mounting a national R and D programme

    International Nuclear Information System (INIS)

    2010-01-01

    of investment RTE, ERDF and EDF-R and D dispose of teams that can identify future R and D needs, pilot and conduct research, and integrate the results, often obtained in collaboration with other parties, in innovative demonstration projects set up by operators. This is no longer the case for many of their European counterparts where research teams have shrunk to a minimum, following cost-cutting decisions and 'rationalisation' of grid activities (decisions made on the basis of short-term business policies, often encouraged by regulators 3). These encouraging observations notwithstanding, transmission and distribution grid operators in France consider that they must acquire further knowledge pertaining to the sizing and operation of electricity networks. Five policy options underlie this vision extending to 2020, a vision aimed at validating new directions for the evolution of these networks: 1 - Strengthen the capacity of the transmission grid to integrate an energy bouquet that complies with European commitments for de-carbonising electricity generation, via the development of renewable energy, 2 - Make the distribution grid flexible and reliable enough to meet the consumer demand and the requirements of energy service vendors, 3 - Coordinate interaction between transmission operators and distributors so as to reinforce the reliability of the grid in France, optimise its energy performance and contribute to building the single electricity market in Europe, 4 - Encourage electricity demand management as an additional source of supply and economic competitiveness, 5 - Expand decentralised generation, particularly to help further reduce energy demand in commercial and residential buildings

  4. Residential Consumer-Centric Demand-Side Management Based on Energy Disaggregation-Piloting Constrained Swarm Intelligence: Towards Edge Computing

    Science.gov (United States)

    Hu, Yu-Chen

    2018-01-01

    The emergence of smart Internet of Things (IoT) devices has highly favored the realization of smart homes in a down-stream sector of a smart grid. The underlying objective of Demand Response (DR) schemes is to actively engage customers to modify their energy consumption on domestic appliances in response to pricing signals. Domestic appliance scheduling is widely accepted as an effective mechanism to manage domestic energy consumption intelligently. Besides, to residential customers for DR implementation, maintaining a balance between energy consumption cost and users’ comfort satisfaction is a challenge. Hence, in this paper, a constrained Particle Swarm Optimization (PSO)-based residential consumer-centric load-scheduling method is proposed. The method can be further featured with edge computing. In contrast with cloud computing, edge computing—a method of optimizing cloud computing technologies by driving computing capabilities at the IoT edge of the Internet as one of the emerging trends in engineering technology—addresses bandwidth-intensive contents and latency-sensitive applications required among sensors and central data centers through data analytics at or near the source of data. A non-intrusive load-monitoring technique proposed previously is utilized to automatic determination of physical characteristics of power-intensive home appliances from users’ life patterns. The swarm intelligence, constrained PSO, is used to minimize the energy consumption cost while considering users’ comfort satisfaction for DR implementation. The residential consumer-centric load-scheduling method proposed in this paper is evaluated under real-time pricing with inclining block rates and is demonstrated in a case study. The experimentation reported in this paper shows the proposed residential consumer-centric load-scheduling method can re-shape loads by home appliances in response to DR signals. Moreover, a phenomenal reduction in peak power consumption is achieved

  5. Residential Consumer-Centric Demand-Side Management Based on Energy Disaggregation-Piloting Constrained Swarm Intelligence: Towards Edge Computing

    Directory of Open Access Journals (Sweden)

    Yu-Hsiu Lin

    2018-04-01

    Full Text Available The emergence of smart Internet of Things (IoT devices has highly favored the realization of smart homes in a down-stream sector of a smart grid. The underlying objective of Demand Response (DR schemes is to actively engage customers to modify their energy consumption on domestic appliances in response to pricing signals. Domestic appliance scheduling is widely accepted as an effective mechanism to manage domestic energy consumption intelligently. Besides, to residential customers for DR implementation, maintaining a balance between energy consumption cost and users’ comfort satisfaction is a challenge. Hence, in this paper, a constrained Particle Swarm Optimization (PSO-based residential consumer-centric load-scheduling method is proposed. The method can be further featured with edge computing. In contrast with cloud computing, edge computing—a method of optimizing cloud computing technologies by driving computing capabilities at the IoT edge of the Internet as one of the emerging trends in engineering technology—addresses bandwidth-intensive contents and latency-sensitive applications required among sensors and central data centers through data analytics at or near the source of data. A non-intrusive load-monitoring technique proposed previously is utilized to automatic determination of physical characteristics of power-intensive home appliances from users’ life patterns. The swarm intelligence, constrained PSO, is used to minimize the energy consumption cost while considering users’ comfort satisfaction for DR implementation. The residential consumer-centric load-scheduling method proposed in this paper is evaluated under real-time pricing with inclining block rates and is demonstrated in a case study. The experimentation reported in this paper shows the proposed residential consumer-centric load-scheduling method can re-shape loads by home appliances in response to DR signals. Moreover, a phenomenal reduction in peak power

  6. Residential Consumer-Centric Demand-Side Management Based on Energy Disaggregation-Piloting Constrained Swarm Intelligence: Towards Edge Computing.

    Science.gov (United States)

    Lin, Yu-Hsiu; Hu, Yu-Chen

    2018-04-27

    The emergence of smart Internet of Things (IoT) devices has highly favored the realization of smart homes in a down-stream sector of a smart grid. The underlying objective of Demand Response (DR) schemes is to actively engage customers to modify their energy consumption on domestic appliances in response to pricing signals. Domestic appliance scheduling is widely accepted as an effective mechanism to manage domestic energy consumption intelligently. Besides, to residential customers for DR implementation, maintaining a balance between energy consumption cost and users’ comfort satisfaction is a challenge. Hence, in this paper, a constrained Particle Swarm Optimization (PSO)-based residential consumer-centric load-scheduling method is proposed. The method can be further featured with edge computing. In contrast with cloud computing, edge computing—a method of optimizing cloud computing technologies by driving computing capabilities at the IoT edge of the Internet as one of the emerging trends in engineering technology—addresses bandwidth-intensive contents and latency-sensitive applications required among sensors and central data centers through data analytics at or near the source of data. A non-intrusive load-monitoring technique proposed previously is utilized to automatic determination of physical characteristics of power-intensive home appliances from users’ life patterns. The swarm intelligence, constrained PSO, is used to minimize the energy consumption cost while considering users’ comfort satisfaction for DR implementation. The residential consumer-centric load-scheduling method proposed in this paper is evaluated under real-time pricing with inclining block rates and is demonstrated in a case study. The experimentation reported in this paper shows the proposed residential consumer-centric load-scheduling method can re-shape loads by home appliances in response to DR signals. Moreover, a phenomenal reduction in peak power consumption is achieved

  7. Significance of the agreement and results of the Bonn and Marrakesh Conventions with respect to long-term reduction of greenhouse gases. An analysis of supply-side and demand-side aspects; Bedeutung des Bonner Beschlusses und der Ergebnisse aus Marrakesch fuer die langfristige Senkung der Treibhausgasemissionen. Eine Analyse der Angebots- und Nachfrageseite

    Energy Technology Data Exchange (ETDEWEB)

    Wartmann, S.C.; Cremer, C.; Betz, R. [Fraunhofer Institut Systemtechnik und Innovationsforschung, Karlsruhe (Germany)

    2001-07-01

    The article examines in great detail the Bonn resolution and the results of the Marrakesh Convention of the Parties to the UNFCCC with respect to the achievable contributions to a global reduction of greenhouse emissions. The analysis looks at the most important action plans and the relevant mechanisms agreed upon and derives global demand-side and national supply-side estimates and develops relevant projections of lasting greenhouse gas reductions, also indicating further required measures. (orig./CB) [German] Es wird untersucht, inwiefern die Regelungen des Bonner Beschlusses und der Konferenz in Marrakesch tatsaechlich auf das urspruengliche Ziel der Klimarahmenkonvention, langfristige Treibhausgasminderungen, abzielen. Zunaechst werden die wichtigsten Ergebnisse dieser Konferenzen erlaeutert. Anschliessend kann die internationale Nachfrage bzw. das entsprechende Angebot an Emissionsminderungen in Bezug auf Treibhausgasminderungen abgeschaetzt werden. Es ergibt sich ein Ueberblick, ob und in welchem Masse eigene Anstrengungen der verpflichteten Staaten noch notwendig sind. (orig./CB)

  8. Simple models of district heating systems for load and demand side management and operational optimisation; Simple modeller for fjernvarmesystemer med henblik pae belastningsudjaevning og driftsoptimering

    Energy Technology Data Exchange (ETDEWEB)

    Boehm, B. [Technical Univ. of Denmark, Dept. of Mechanical Engineering, Kgs. Lyngby (Denmark); Larsen, H.V. [Risoe National Lab., System Analysis Dept., Roskilde (DK)

    2004-12-01

    The purpose of this research project has been to further develop and test simple (aggregated) models of district heating (DH) systems for simulation and operational optimization, and to investigate the influence of Load Management and Demand Side Management (DMS) on the total operational costs. The work is based on physical-mathematical modelling and simulation of DH systems, and is a continuation of previous EFP-96 work. In the present EFP-2001 project the goals have been to improve the Danish method of aggregation by addressing the problem of aggregation of pressure losses, and to test the methods on a much larger data set than in the EFP-1996 project. In order to verify the models it is crucial to have good data at disposal. Full information on the heat loads and temperatures not only at the DH plant but also at every consumer (building) is needed, and therefore only a few DH systems in Denmark can supply such data. (BA)

  9. Intelligent Demand Side Management within production systems. Towards Industrial Smart Grids; Intelligente Lastverschiebung in der Produktionstechnik. Ein Weg zum Industrial Smart Grid

    Energy Technology Data Exchange (ETDEWEB)

    Schriegel, Sebastian; Pethig, Florian; Jasperneite, Juergen [Fraunhofer-Anwendungszentrum Industrial Automation (IOSB-INA), Lemgo (Germany)

    2012-07-01

    Demand Side Management is a key technology of smart grids. Consumers adjust their energy consumption at current time-volatile energy generation capacity. The currently used energy consumption optimizations, such as the use of energy efficient actuators, pause functions and peak load management should be supplemented by a dynamic real-time energy management. For industrial consumers, such an energy management may be established at various levels of the automation pyramid. On plant level energy optimization is based on predictions, on control and field level optimization is based on process variables. The taxonomy of potential energy optimization differentiates between organizational, synchronization and single parameter optimization. This potential can be exploited with intelligent control technology based on qualified process models and tunable control programs. An Industrial Smart Grid results by interlinking the former mentioned intelligent control technologies with the plant infrastructure and thereby provides an optimal energy consumption behavior and a perfect integration into and interaction with the smart grid. (orig.)

  10. Emission impacts of demand-side programs: What have we achieved so far and how will recent policy decision change program choices?

    International Nuclear Information System (INIS)

    Tempchin, R.S.; Van den Berg, A.J.; Geba, V.B.; Felix, C.S.; Goldsmith, M.W.

    1990-01-01

    Congress and many state legislatures have been discussing the possibility of regulating carbon dioxide (CO 2 ), Sulfur dioxide (SO 2 ), nitrogen oxides (NO x ), chlorofluorocarbons (CFC's) and other emissions. Key to these discussions is the recommendation that energy efficiency, and specifically electric utility demand-side management (DSM) programs, be used as an emission control option. Methods for incorporating the social or external costs of energy production into utility planning are being developed, and estimates of potential emission impacts attributed to DSM programs have been calculated. However, little research has calculated the actual emission impacts from existing DSM programs. The increasing need for electric energy services and fossil fuel generation create an apparent conflict with the risks and regulations associated with global climate change and clean air. Electric utility DSM programs can be used to resolve these conflicts by providing equal or better energy services and a net reduction in emissions. This paper summarizes three separate related research projects. The first study, Impacts of Electric Utility Demand-Side Management Programs on Power Plant Emissions, collects utility and state data on existing DSM programs to approximate the level of SO 2 , NO x , and CO 2 reductions on a regional and national basis. Phase 1 of this study is a completed survey of DSM savings by state. The second and third studies, Carbon Dioxide Reduction Through Electrification of the Industrial and Transportation Sectors, and Carbon Dioxide Reduction Through Electrification of the Residential and Commercial Sectors, compare selected high efficiency electric technologies with fossil-fueled alternatives to determine CO 2 emissions. Through these studies, the authors have begun to quantify the emissions impacts from utility DSM programs and efficient electric equipment

  11. The side-effects to CPAP treatment inventory: the development and initial validation of a new tool for the measurement of side-effects to CPAP treatment.

    Science.gov (United States)

    Broström, Anders; Arestedt, Kristofer Franzén; Nilsen, Per; Strömberg, Anna; Ulander, Martin; Svanborg, Eva

    2010-12-01

    Continuous positive airway pressure (CPAP) is the treatment of choice for obstructive sleep apnoea syndrome (OSAS), but side-effects are common. No validated self-rating scale measuring side-effects to CPAP treatment exists today. The aim was to develop the side-effects to CPAP treatment inventory (SECI), and investigate the validity and reliability of the instrument among patients with OSAS. SECI was developed on the basis of: (1) in-depth interviews with 23 patients; (2) examination of the scientific literature and (3) consensus agreement of a multi-professional expert panel. This yielded 15 different types of side-effects related to CPAP treatment. Each side-effect has three sub-questions (scales): perceived frequency (a) and magnitude (b) of the side-effect, as well as its perceived impact on CPAP use (c). A cross-sectional descriptive design was used. A total of 329 patients with OSAS with an average use of CPAP treatment for 39 months (2 weeks to 182 months) were recruited. Data were collected with SECI, and obtained from medical records (clinical variables and data related to CPAP treatment). Construct validity was confirmed with factor analysis (principal component analysis with orthogonal rotation). A logical two-factor solution, the device subscale and symptom subscale, emerged across all three scales. The symptom subscale describing physical and psychological side-effects and the device subscale described mask and device-related side-effects. Internal consistency reliability of the three scales was good (Cronbach's α = 0.74-0.86) and acceptable for the subscales (Cronbach's α = 0.62-0.86). The satisfactory measurement properties of this new instrument are promising and indicate that SECI can be used to measure side-effects to CPAP treatment. © 2010 European Sleep Research Society.

  12. Side Effects of Minocycline Treatment in Patients with Fragile X Syndrome and Exploration of Outcome Measures

    Science.gov (United States)

    Utari, Agustini; Chonchaiya, Weerasak; Rivera, Susan M.; Schneider, Andrea; Hagerman, Randi J.; Faradz, Sultana M. H.; Ethell, Iryna M.; Nguyen, Danh V.

    2010-01-01

    Minocycline can rescue the dendritic spine and synaptic structural abnormalities in the fragile X knock-out mouse. This is a review and preliminary survey to document side effects and potential outcome measures for minocycline use in the treatment of individuals with fragile X syndrome. We surveyed 50 patients with fragile X syndrome who received…

  13. A study protocol: using demand-side financing to meet the birth spacing needs of the underserved in Punjab Province in Pakistan.

    Science.gov (United States)

    Azmat, Syed Khurram; Ali, Moazzam; Hameed, Waqas; Mustafa, Ghulam; Abbas, Ghazanfer; Ishaque, Muhammad; Bilgrami, Mohsina; Temmerman, Marleen

    2014-05-30

    High fertility rates, unwanted pregnancies, low modern contraceptive prevalence and a huge unmet need for contraception adversely affect women's health in Pakistan and this problem is compounded by limited access to reliable information and quality services regarding birth spacing especially in rural and underserved areas. This paper presents a study protocol that describes an evaluation of a demand-side financing (DSF) voucher approach which aims to increase the uptake of modern contraception among women of the lowest two wealth quintiles in Punjab Province, Pakistan. This study will use quasi-experimental design with control arm and be implemented in: six government clinics from the Population Welfare Department; 24 social franchise facilities branded as 'Suraj' (Sun), led by Marie Stopes Society (a local non-governmental organization); and 12 private sector clinics in Chakwal, Mianwali and Bhakkar districts. The study respondents will be interviewed at baseline and endline subject to voluntary acceptance and medical eligibility. In addition, health service data will record each client visit during the study period. The study will examine the impact of vouchers in terms of increasing the uptake of modern contraception by engaging private and public sector service providers (mid-level and medical doctors). If found effective, this approach can be a viable solution to satisfying the current demand and meeting the unmet need for contraception, particularly among the poorest socio-economic group.

  14. A study protocol: using demand-side financing to meet the birth spacing needs of the underserved in Punjab Province in Pakistan

    Science.gov (United States)

    2014-01-01

    Background High fertility rates, unwanted pregnancies, low modern contraceptive prevalence and a huge unmet need for contraception adversely affect women’s health in Pakistan and this problem is compounded by limited access to reliable information and quality services regarding birth spacing especially in rural and underserved areas. This paper presents a study protocol that describes an evaluation of a demand-side financing (DSF) voucher approach which aims to increase the uptake of modern contraception among women of the lowest two wealth quintiles in Punjab Province, Pakistan. Methods/Design This study will use quasi-experimental design with control arm and be implemented in: six government clinics from the Population Welfare Department; 24 social franchise facilities branded as ‘Suraj’ (Sun), led by Marie Stopes Society (a local non-governmental organization); and 12 private sector clinics in Chakwal, Mianwali and Bhakkar districts. The study respondents will be interviewed at baseline and endline subject to voluntary acceptance and medical eligibility. In addition, health service data will record each client visit during the study period. Discussion The study will examine the impact of vouchers in terms of increasing the uptake of modern contraception by engaging private and public sector service providers (mid-level and medical doctors). If found effective, this approach can be a viable solution to satisfying the current demand and meeting the unmet need for contraception, particularly among the poorest socio-economic group. PMID:24885657

  15. “Souls of the ancestor that knock us out” and other tales. A qualitative study to identify demand-side factors influencing malaria case management in Cambodia

    Directory of Open Access Journals (Sweden)

    O’Connell Kathryn A

    2012-10-01

    Full Text Available Abstract Background Appropriate case management of suspected malaria in Cambodia is critical given anti-malarial drug resistance in the region. Improving diagnosis and the use of recommended malarial treatments is a challenge in Cambodia where self-treatment and usage of drug cocktails is widespread, a notable difference from malaria treatment seeking in other countries. This qualitative study adds to the limited evidence base on Cambodian practices, aiming to understand the demand-side factors influencing treatment-seeking behaviour, including the types of home treatments, perceptions of cocktail medicines and reasons for diagnostic testing. The findings may help guide intervention design. Methods The study used in-depth interviews (IDIs (N = 16 and focus group discussions (FGDs (N = 12 with Cambodian adults from malaria-endemic areas who had experienced malaria fever in the previous two weeks. Data were analysed using NVivo software. Results Findings suggest that Cambodians initially treat suspected malaria at home with home remedies and traditional medicines. When seeking treatment outside the home, respondents frequently reported receiving a cocktail of medicines from trusted providers. Cocktails are perceived as less expensive and more effective than full-course, pre-packaged medicines. Barriers to diagnostic testing include a belief in the ability to self-diagnose based on symptoms, cost and reliance on providers to recommend a test. Factors that facilitate testing include recommendation by trusted providers and a belief that anti-malarial treatment for illnesses other than malaria can be harmful. Conclusions Treatment-seeking behaviour for malaria in Cambodia is complex, driven by cultural norms, practicalities and episode-related factors. Effective malaria treatment programmes will benefit from interventions and communication materials that leverage these demand-side factors, promoting prompt visits to facilities for suspected

  16. Demand-side financing for maternal and newborn health: what do we know about factors that affect implementation of cash transfers and voucher programmes?

    Science.gov (United States)

    Hunter, Benjamin M; Murray, Susan F

    2017-08-31

    Demand-side financing (DSF) interventions, including cash transfers and vouchers, have been introduced to promote maternal and newborn health in a range of low- and middle-income countries. These interventions vary in design but have typically been used to increase health service utilisation by offsetting some financial costs for users, or increasing household income and incentivising 'healthy behaviours'. This article documents experiences and implementation factors associated with use of DSF in maternal and newborn health. A secondary analysis (using an adapted Supporting the Use of Research Evidence framework - SURE) was performed on studies that had previously been identified in a systematic review of evidence on DSF interventions in maternal and newborn health. The article draws on findings from 49 quantitative and 49 qualitative studies. The studies give insights on difficulties with exclusion of migrants, young and multiparous women, with demands for informal fees at facilities, and with challenges maintaining quality of care under increasing demand. Schemes experienced difficulties if communities faced long distances to reach participating facilities and poor access to transport, and where there was inadequate health infrastructure and human resources, shortages of medicines and problems with corruption. Studies that documented improved care-seeking indicated the importance of adequate programme scope (in terms of programme eligibility, size and timing of payments and voucher entitlements) to address the issue of concern, concurrent investments in supply-side capacity to sustain and/or improve quality of care, and awareness generation using community-based workers, leaders and women's groups. Evaluations spanning more than 15 years of implementation of DSF programmes reveal a complex picture of experiences that reflect the importance of financial and other social, geographical and health systems factors as barriers to accessing care. Careful design of DSF

  17. Bayesian reconstruction of seafloor shape from side-scan sonar measurements using a Markov Random Field

    OpenAIRE

    Woock, P.; Pak, Alexey

    2014-01-01

    To explore the seafloor, a side-scan sonar emits a directed acoustic signal and then records the returning (reflected) signal intensity as a function of time. The inversion of that process is not unique: multiple shapes may lead to identical measured responses. In this work, we suggest a Bayesian approach to reconstructing the 3D shape of the seafloor from multiple sonar measurements, inspired by the state-of-the-art methods of inverse raytracing that originated in computer vision. The space ...

  18. SERVICE QUALITY MEASUREMENT AND DEMAND FOR INSURANCE: AN EMPIRICAL STUDY FROM NIGERIAN INSURANCE INDUSTRY

    Directory of Open Access Journals (Sweden)

    Abass, OlufemiAdebowale

    2016-11-01

    Full Text Available Insurance provides financial protection to the insured, though; its acceptance by Nigerian insuring public is still low. This can sharply be traced to low awareness of insurance service. More importantly, quality of service to the few who embraced it had been low. Therefore, insuring public perceives insurance service as defective because customers’ expectations are not met. The objective of this research is to find out whether application of service quality measurement will drive demand for insurance products. Hypothesis was tested to find out whether SERVQUAL measurement is not significantly related to demand for insurance products in Nigeria. The study adopts descriptive research design; hypothesis was tested using regression analysis. The study reveals that there is a significant relationship between application of SERVQUAL measurement and demand for insurance. It is recommended that insurance companies operating in Nigeria should adopt SERVQUAL measurement which will further increase customer retention and loyalty.

  19. Failing Tests: Commentary on "Adapting Educational Measurement to the Demands of Test-Based Accountability"

    Science.gov (United States)

    Thissen, David

    2015-01-01

    In "Adapting Educational Measurement to the Demands of Test-Based Accountability" Koretz takes the time-honored engineering approach to educational measurement, identifying specific problems with current practice and proposing minimal modifications of the system to alleviate those problems. In response to that article, David Thissen…

  20. Heat demand profiles of energy conservation measures in buildings and their impact on a district heating system

    International Nuclear Information System (INIS)

    Lundström, Lukas; Wallin, Fredrik

    2016-01-01

    Highlights: • Energy savings impact on an low CO 2 emitting district heating system. • Heat profiles of eight building energy conservation measures. • Exhaust air heat pump, heat recovery ventilation, electricity savings etc. • Heat load weather normalisation with segmented multivariable linear regression. - Abstract: This study highlights the forthcoming problem with diminishing environmental benefits from heat demand reducing energy conservation measures (ECM) of buildings within district heating systems (DHS), as the supply side is becoming “greener” and more primary energy efficient. In this study heat demand profiles and annual electricity-to-heat factors of ECMs in buildings are computed and their impact on system efficiency and greenhouse gas emissions of a Swedish biomass fuelled and combined heat and power utilising DHS are assessed. A weather normalising method for the DHS heat load is developed, combining segmented multivariable linear regressions with typical meteorological year weather data to enable the DHS model and the buildings model to work under the same weather conditions. Improving the buildings’ envelope insulation level and thereby levelling out the DHS heat load curve reduces greenhouse gas emissions and improves primary energy efficiency. Reducing household electricity use proves to be highly beneficial, partly because it increases heat demand, allowing for more cogeneration of electricity. However the other ECMs considered may cause increased greenhouse gas emissions, mainly because of their adverse impact on the cogeneration of electricity. If biomass fuels are considered as residuals, and thus assigned low primary energy factors, primary energy efficiency decreases when implementing ECMs that lower heat demand.

  1. Electrical network capacity support from demand side response: Techno-economic assessment of potential business cases for small commercial and residential end-users

    International Nuclear Information System (INIS)

    Martínez Ceseña, Eduardo A.; Good, Nicholas; Mancarella, Pierluigi

    2015-01-01

    Demand Side Response (DSR) is recognised for its potential to bring economic benefits to various electricity sector actors, such as energy retailers, Transmission System Operators (TSOs) and Distribution Network Operators (DNOs). However, most DSR is provided by large industrial and commercial consumers, and little research has been directed to the quantification of the value that small (below 100 kW) commercial and residential end-users could accrue by providing DSR services. In particular, suitable models and studies are needed to quantify potential business cases for DSR from small commercial and residential end-users. Such models and studies should consider the technical and physical characteristics of the power system and demand resources, together with the economic conditions of the power market. In addition, the majority of research focuses on provision of energy arbitrage or ancillary services, with very little attention to DSR services for network capacity support. Accordingly, this paper presents comprehensive techno-economic methodologies for the quantification of three capacity-based business cases for DSR from small commercial and residential end-users. Case study results applied to a UK context indicate that, if the appropriate regulatory framework is put in place, services for capacity support to both DNOs and TSOs can result into potentially attractive business cases for DSR from small end-users with minimum impact on their comfort level. -- Highlights: •We present three business cases for DSR from domestic and commercial end-users. •A comprehensive techno-economic methodology is proposed for the quantification of each DSR business cases. •The regulatory implications associated with each business case are discussed

  2. Oh and by the way, you get meter readings too : a look at distribution automation, intelligent grids, and demand side management : getting the real value from your AMI

    Energy Technology Data Exchange (ETDEWEB)

    Summerlin, T. [Gestalt, Camden, NJ (United States); Ferguson, P.D. [Newmarket Hydro Ltd., Newmarket, ON (Canada)

    2006-07-01

    The full value of smart metering programs will be realized when information and communication capabilities are used to enable distribution automation, intelligent grids, and sufficient data management that will transform interval meter data into useful information. By leveraging and managing meter data effectively, utilities can increase their operational efficiency, improve their understanding of customers' needs, and develop more effective demand side management programs. This presentation examined some of the changing priorities of advanced metering infrastructure (AMI) strategies, and provided details of meter data management (MDM) technologies developed to help utilities increase efficiency, cut costs and provide better service to their customers. An MDM system is the set of data bases and applications required to provide utilities with a solution for the data retention, analysis and storage repository gaps that will be created when monthly manual meter readings are replaced with AMI systems. In order to resolve storage, functionality and legacy integration gaps, MDM systems must be scalable systems that can support large and small quantities of meter data, and must also conform to industry standard data warehouse designs. Data structure in the systems must support both regulated and deregulated markets, and be capable of providing extensive graphical, tabular and Excel export of the metered and totalized data from the interval to system level. MDM systems can provide improved support for demand response decision-making processes; distribution planning and reliability; outage management; revenue assurance; forecasting; and curtailment. It was concluded that MDM systems can be used to improve processes and provide additional benefits well beyond the meter reading and billing process benefits originally identified by utilities as a primary goal of implementing AMI. refs., tabs., figs.

  3. Application of advanced one sided stress wave velocity measurement in concrete

    International Nuclear Information System (INIS)

    Lee, Joon Hyun; Song, Won Joon; Popovices, J. S.; Achenbach, J. D.

    1997-01-01

    It is of interest to reliably measure the velocity of stress waves in concrete. At present, reliable measurement is not possible for dispersive and attenuating materials such as concrete when access to only one surface of the structure is available, such as in the case of pavement structures. In this paper, a new method for one-sided stress wave velocity determination in concrete is applied to investigate the effects of composition, age and moisture content. This method uses a controlled impact as a stress wave source and two sensitive receivers mounted on the same surface as the impact sites. The novel aspect of the technique is the data collection system which automatically determines the arrival of the generated longitudinal and surface wave arrivals. A conventional ultrasonic through transmission method is used to compare with the results determined by the one-sided method.

  4. Measurement of longitudinal and rayleigh wave velocities by advanced one-sided technique in concrete

    International Nuclear Information System (INIS)

    Lee, Joon Hyun; Song, Won Joon; Popovics, J. S.; Achenbach, J. D.

    1997-01-01

    A new procedure for the advanced one-sided measurement of longitudinal wave and surface wave velocities in concrete is presented in this paper. Stress waves are generated in a consistent fashion with a DC solenoid. Two piezoelectric accelerometers are mounted on the surface of a specimen as receivers. Stress waves propagate along the surface of the specimen and are detected by the receivers. In order to reduce the large incoherent noise levels of the signals, signals are collected and manipulated by a computer program for each velocity measurement. For a known distance between the two receivers and using the measured flight times, the velocities of the longitudinal wave and the surface wave are measured. The velocities of the longitudinal wave determined by this method are compared with those measured by conventional methods on concrete, PMMA and steel.

  5. Investigating risk and robustness measures for supply chain network design under demand uncertainty

    DEFF Research Database (Denmark)

    Govindan, Kannan; Fattahi, Mohammad

    2017-01-01

    to obtain risk-averse and robust solutions, respectively. Computational results are presented on a real-life case study to illustrate the applicability of the proposed approaches. To compare these different decision-making situations, a simulation approach is used. Furthermore, by several test problems......-variable demands. To deal with the stochastic demands, a Latin Hypercube Sampling method is applied to generate a fan of scenarios and then, a backward scenario reduction technique reduces the number of scenarios. Weighted mean-risk objectives by using different risk measures and minimax objective are examined...

  6. Direct measurements of particle flux along gap sides in castellated plasma facing component in COMPASS

    International Nuclear Information System (INIS)

    Dejarnac, Renaud; Dimitrova, Miglena; Komm, Michael; Schweer, Bernd; Terra, Alexis; Martin, Aurelien; Boizante, Gontran; Gunn, James P.; Panek, Radomir

    2014-01-01

    Highlights: •We designed a probe to measure plasma deposition into gaps during tokamak discharges. •Isat profiles are measured on both side of the gap for different gap orientations. •Ion current is measured at the bottom of the gap in the toroidal orientation. •Kinetic simulations reproduce well experimental profiles qualitatively. -- Abstract: In this paper, we report results of a dedicated experiment that gives the plasma penetration profiles inside a gap of a tokamak castellated plasma-facing component. A specially designed probe that recreates a gap between two tiles has been built for the purpose of this study. It allows to measure ion saturation profiles along the 2 sides and at the bottom of the gap for both poloidal and toroidal orientations. The novelty of such experiment is the real time measurement of the plasma flux inside the gap during a tokamak D-shaped discharge compared to previous experimental studies which were mainly post-mortem. This experiment was performed in the COMPASS tokamak and results are compared with particle-in-cell simulations. The plasma deposition is found to be asymmetric in both orientations with a stronger effect in poloidal gaps. The Larmor radius of the incoming ions plays a role in the plasma penetration only in poloidal gaps but seems to have little impact in toroidal gaps. Profiles are qualitatively well reproduced by simulations. Ion current is recorded at the bottom of a toroidal gap under certain conditions

  7. Quantifying the physical demands of collision sports: does microsensor technology measure what it claims to measure?

    Science.gov (United States)

    Gabbett, Tim J

    2013-08-01

    The physical demands of rugby league, rugby union, and American football are significantly increased through the large number of collisions players are required to perform during match play. Because of the labor-intensive nature of coding collisions from video recordings, manufacturers of wearable microsensor (e.g., global positioning system [GPS]) units have refined the technology to automatically detect collisions, with several sport scientists attempting to use these microsensors to quantify the physical demands of collision sports. However, a question remains over the validity of these microtechnology units to quantify the contact demands of collision sports. Indeed, recent evidence has shown significant differences in the number of "impacts" recorded by microtechnology units (GPSports) and the actual number of collisions coded from video. However, a separate study investigated the validity of a different microtechnology unit (minimaxX; Catapult Sports) that included GPS and triaxial accelerometers, and also a gyroscope and magnetometer, to quantify collisions. Collisions detected by the minimaxX unit were compared with video-based coding of the actual events. No significant differences were detected in the number of mild, moderate, and heavy collisions detected via the minimaxX units and those coded from video recordings of the actual event. Furthermore, a strong correlation (r = 0.96, p sports. Until such validation research is completed, sport scientists should be circumspect of the ability of other units to perform similar functions.

  8. Measurement of the Rise-Time in a Single Sided Ladder Detector

    International Nuclear Information System (INIS)

    Gerber, C.E.

    1997-01-01

    In this note we report on the measurement of the preamplifier output rise time for a SVXII chip mounted on a D0 single sided ladder. The measurements were performed on the ladder 001-883-L, using the laser test stand of Lab D. The rise time was measured for different values of the response (or bandwidth) of the preamplifier. As a bigger bandwidth results in longer rise times and therefore in less noise, the largest possible bandwidth consistent with the time between bunch crossings should be chosen to operate the detectors. The rise time is defined as the time elapsed between 10% and 90% of the charge is collected. It is also interesting to measure the time for full charge collection and the percentage of charge collected in 132 ns and 396 ns. The results are shown in table 1, for bandwidths between 2 and 63 (binary numbers). The uncertainty on the time measurement is considered to be ∼ 10 ns. Figure 1 schematically defines the four quantities measured: rise time, time of full charge collection, and percentage of charge collected in 132 ns and 396 ns. Figures 2 to 8 are the actual measurements for bandwidths of 2, 4, 8, 12, 24, 32 and 63. Figure 9 is a second measurement for BW=24, used as a consistency check of the system and the time measurement performed on the plots. The data indicate that the single sided ladders can be operated at BW=63 for 396 ns and BW=12 for 132 ns, achieving full charge collection. This will result in smaller noise than originally anticipated.

  9. Linking promotion strategies for RES-E and for demand-side conservation in a dynamic European electricity market: Lessons from the EU projects OPTRES, FORRES and GREEN-X. Volume 1

    International Nuclear Information System (INIS)

    Faber, Thomas; Resch, Gustav; Haas, Reinhard; Huber, Claus; Ragwitz, Mario

    2007-01-01

    The objective of this paper is to describe the derivation of least-cost strategies for an significant increase of electricity generation from renewables (RES-E) with minimal costs for European citizens and to investigate the role of accompanying demand-side conservation (DSC) activities. The analyses are conducted by using the model GREEN-X funded by the EC. It allows analyses for both, the EU as a whole as well as for every single member state. Within the model the most important RES-E (e.g. biomass, wind-onshore and off-shore, geothermal, PV, solar thermal ...) technologies are described for every EU-15 country by means of dynamic cost-resource curves. Demand-side conservation measures are considered by aggregated cost-resource curves. To analyse various scenarios different policy schemes can be selected, (e.g. feed-in tariffs, tendering systems, investment subsidies, tax incentives, quotas, tradable certificates) and modelled in a dynamic framework. The corresponding costs and benefits for companies and consumers are an output.The major result is that DSC plays an important role for increasing the share of RES-E. E.g. the same deployment of RES in a conservation scenario leads to 28 % of RES-E by 2020 while in the BAU-scenario this share is only 20 %. Moreover, a certain quota of RES - e.g. 20 % - can be reached much cheaper if a certain share of money is invested in DSC. The core conclusion of this analysis is: On EU level it is of superior importance to introduce integrated policies - policies focusing on the promotion of RES and on energy conservation simultaneously - to reap the utmost benefits from public money invested

  10. Antiepileptic Drug Behavioral Side Effects in Individuals with Mental Retardation and the Use of Behavioral Measurement Techniques.

    Science.gov (United States)

    Kalachnik, John E.; And Others

    1995-01-01

    Behavioral psychology measurement methods helped assess antiepileptic drug behavioral side effects in five individuals with mental retardation who could not verbally communicate presence of side effects. When the suspected antiepileptic drug was altered, an 81% reduction of maladaptive behaviors occurred. The measurement methods enabled systematic…

  11. Charge correlation measurements of double-sided direct-coupled silicon mirostrip detectors

    International Nuclear Information System (INIS)

    Wood, M.L.; Kuehler, J.F.; Kalbfleisch, G.R.; Kaplan, D.H.; Skubic, P.; Lucas, A.D.; Wilburn, C.D.

    1991-01-01

    Charge correlation measurements of several Micron 38 mm by 58 mm by 300 micron thick double-sided DC-coupled microstripe detectors have been made. They have been bench tested with a Sr-90 source, with the detectors operated at -22C. The correlation of the charges collected from both the diode ('holes') and the ohmic ('electrons') stripes are equal within a signal to noise resolution of 20:1 (i.e., 1,200 electrons noise) using common-mode subtracted double-correlated sampling with the Berkeley SVXD readout chip

  12. Heat transfer and pressure measurements for the SSME fuel-side turbopump

    Science.gov (United States)

    Dunn, Michael G.

    1990-01-01

    A measurement program is currently underway at the Calspan-UB Research Center (CUBRC) which utilizes the Rocketdyne two-state fuel-side turbine with the engine geometric configuration reproduced. This is a full two-state turbine for which the vane rows and the blades are the engine hardware currently used on the Space Shuttle turbopump. A status report is provided for the experimental program and a description of the instrumentation and the measurements to be performed. The specific items that will be illustrated and described are as follows: (1) the gas flow path, (2) the heat-flux instrumentation, (3) the surface-pressure instrumentation, (4) the experimental conditions for which data will be obtained, and (5) the specific measurements that will be performed.

  13. Evaluating Job Demands and Control Measures for Use in Farm Worker Health Surveillance

    Science.gov (United States)

    Alterman, Toni; Gabbard, Susan; Grzywacz, Joseph G.; Shen, Rui; Li, Jia; Nakamoto, Jorge; Carroll, Daniel J.; Muntaner, Carles

    2015-01-01

    Workplace stress likely plays a role in health disparities; however, applying standard measures to studies of immigrants requires thoughtful consideration. The goal of this study was to determine the appropriateness of two measures of occupational stressors (‘decision latitude’ and ‘job demands’) for use with mostly immigrant Latino farm workers. Cross-sectional data from a pilot module containing a four-item measure of decision latitude and a two-item measure of job demands were obtained from a subsample (N = 409) of farm workers participating in the National Agricultural Workers Survey. Responses to items for both constructs were clustered toward the low end of the structured response-set. Percentages of responses of ‘very often’ and ‘always’ for each of the items were examined by educational attainment, birth country, dominant language spoken, task, and crop. Cronbach’s α, when stratified by subgroups of workers, for the decision latitude items were (0.65–0.90), but were less robust for the job demands items (0.25–0.72). The four-item decision latitude scale can be applied to occupational stress research with immigrant farm workers, and potentially other immigrant Latino worker groups. The short job demands scale requires further investigation and evaluation before suggesting widespread use. PMID:25138138

  14. Analysis of energy demand, and evaluation of energy conservation measures in urban districts

    International Nuclear Information System (INIS)

    Nakamura, H.; Yoshida, N.

    1994-01-01

    Mitsubishi Research Institute has analyzed the energy demand of a typical Japanese city, Yokohama, as well as the distribution of fossil-energy flow, and the final consumption by sectors. It has evaluated the effectiveness of various energy conservation measures, (e.g., cogeneration, electric cars, insulation,...) in countering the global warming trend. This study defines a viable methodology which may be utilized, in the future, in examining the effectiveness of environmental policies. (TEC). 1 tab., 4 figs

  15. Two way assessment of other physical work demands while measuring the whole body vibration magnitude

    Science.gov (United States)

    Tiemessen, Ivo J. H.; Hulshof, Carel T. J.; Frings-Dresen, Monique H. W.

    2008-03-01

    Direct observation, instead of using self-administered questionnaires might give more reliable and specific information about physical work demands at the workplace. This information is of use in a population already at risk of developing low back pain (LBP) due to whole body vibration (WBV) exposure. The aims of this study are to assess the WBV exposure in an exposed population and to assess other physical work demands in two ways, by direct observation and with the use of a self-administered questionnaire. We therefore assessed the WBV magnitude and 5 WBV-related physical work demands by using the PalmTrac system and a self-administered questionnaire in a group of drivers ( N=10). The main findings are 7 out of 10 drivers are exceeding the EU action value. About 50% of the drivers under-estimated the time 'bending', 60% the time 'walking+standing' and 60% over-estimated the time when 'lifting.' We concluded that 7 drivers from this group are at risk of developing LBP and substantial differences exists for the 5 physical work demands comparing the PalmTrac method with the questionnaire. Direct observational assessment in WBV measurements yields extra information. This is useful for preventive activities necessary as drivers are exceeding the EU action value.

  16. Analytical calculation on the determination of steep side wall angles from far field measurements

    Science.gov (United States)

    Cisotto, Luca; Pereira, Silvania F.; Urbach, H. Paul

    2018-06-01

    In the semiconductor industry, the performance and capabilities of the lithographic process are evaluated by measuring specific structures. These structures are often gratings of which the shape is described by a few parameters such as period, middle critical dimension, height, and side wall angle (SWA). Upon direct measurement or retrieval of these parameters, the determination of the SWA suffers from considerable inaccuracies. Although the scattering effects that steep SWAs have on the illumination can be obtained with rigorous numerical simulations, analytical models constitute a very useful tool to get insights into the problem we are treating. In this paper, we develop an approach based on analytical calculations to describe the scattering of a cliff and a ridge with steep SWAs. We also propose a detection system to determine the SWAs of the structures.

  17. Innovation and Demand

    DEFF Research Database (Denmark)

    Andersen, Esben Sloth

    2007-01-01

    the demand-side of markets in the simplest possible way. This strategy has allowed a gradual increase in the sophistication of supply-side aspects of economic evolution, but the one-sided focus on supply is facing diminishing returns. Therefore, demand-side aspects of economic evolution have in recent years...... received increased attention. The present paper argues that the new emphasis on demand-side factors is quite crucial for a deepened understanding of economic evolution. The major reasons are the following: First, demand represents the core force of selection that gives direction to the evolutionary process....... Second, firms' innovative activities relate, directly or indirectly, to the structure of expected and actual demand. Third, the demand side represents the most obvious way of turning to the much-needed analysis of macro-evolutionary change of the economic system....

  18. Soft Measurement Modeling Based on Chaos Theory for Biochemical Oxygen Demand (BOD

    Directory of Open Access Journals (Sweden)

    Junfei Qiao

    2016-12-01

    Full Text Available The precision of soft measurement for biochemical oxygen demand (BOD is always restricted due to various factors in the wastewater treatment plant (WWTP. To solve this problem, a new soft measurement modeling method based on chaos theory is proposed and is applied to BOD measurement in this paper. Phase space reconstruction (PSR based on Takens embedding theorem is used to extract more information from the limited datasets of the chaotic system. The WWTP is first testified as a chaotic system by the correlation dimension (D, the largest Lyapunov exponents (λ1, the Kolmogorov entropy (K of the BOD and other water quality parameters time series. Multivariate chaotic time series modeling method with principal component analysis (PCA and artificial neural network (ANN is then adopted to estimate the value of the effluent BOD. Simulation results show that the proposed approach has higher accuracy and better prediction ability than the corresponding modeling approaches not based on chaos theory.

  19. Inline Monitors for Measuring Cs-137 in the SRS Caustic Side Solvent Extraction Process

    Energy Technology Data Exchange (ETDEWEB)

    Casella, V

    2006-04-24

    The Department of Energy (DOE) selected Caustic-Side Solvent Extraction (CSSX) as the preferred technology for the removal of radioactive cesium from High-Level Waste (HLW) at the Savannah River Site (SRS). Before the full-scale Salt Waste Processing Facility (SWPF) becomes operational, a portion of dissolved saltcake waste will be processed through a Modular CSSX Unit (MCU). The MCU employs the CSSX process, a continuous process that uses a novel solvent to extract cesium from waste and concentrate it in dilute nitric acid. Of primary concern is Cs-137 which makes the solution highly radioactive. Since the MCU does not have the capacity to wait for sample results while continuing to operate, the Waste Acceptance Strategy is to perform inline analyses. Gamma-ray monitors are used to: measure the Cs-137 concentration in the decontaminated salt solution (DSS) before entering the DSS Hold Tank; measure the Cs-137 concentration in the strip effluent (SE) before entering the SE Hold Tank; and verify proper operation of the solvent extraction system by verifying material balance within the process. Since this gamma ray monitoring system application is unique, specially designed shielding was developed and software was written and acceptance tested by Savannah River National Laboratory (SRNL) personnel. The software is a LabView-based application that serves as a unified interface for controlling the monitor hardware and communicating with the host Distributed Control System. This paper presents the design, fabrication and implementation of this monitoring system.

  20. French bio-diesel demand and promoting measures analysis by 2010

    International Nuclear Information System (INIS)

    Bernard, F.

    2008-02-01

    The researches presented aim at assessing bio-diesel promoting measures under consideration in France by 2010. This assessment is based on a deep study of French bio-diesel demand. The use of a linear model for optimizing the whole French refining industry costs allow us to take into account the physicochemical characteristics of bio-diesel useful for gas oil blending operation. This researches show that bio-diesel can be incorporated up to 27% blend in volume to diesel fuel without major technical problem. A decomposition of the value allotted to the bio-diesel by French refiners according to its physicochemical characteristics shows that energy content is the most disadvantageous characteristics for bio-diesel incorporation and, up to 17%, density become also constraining. However, the low bio-diesel sulphur content could become interesting from now to 2010. On the basis of this bio-diesel demand analysis, we proceed to an external coupling of an agro-industrial model of bio-diesel supply with the French refining model. Thus, we study the impact of the 2010 French bio-diesel consumption objective on agricultural surface need, the competitiveness of the bio-diesel, the reduction of greenhouse gases emissions and the trade balance of the petroleum products. On this basis, we propose a critical analysis of French bio-diesel promoting measures under consideration by 2010. (author)

  1. Demand as Frequency Controlled Reserve

    DEFF Research Database (Denmark)

    Xu, Zhao; Østergaard, Jacob; Togeby, Mikael

    2011-01-01

    Relying on generation side alone is deemed insufficient to fulfill the system balancing needs for future Danish power system, where a 50% wind penetration is outlined by the government for year 2025. This paper investigates using the electricity demand as frequency controlled reserve (DFR) as a new...... balancing measure, which has a high potential and can provide many advantages. Firstly, the background of the research is reviewed, including conventional power system reserves and the electricity demand side potentials. Subsequently, the control logics and corresponding design considerations for the DFR...

  2. Numerical studies and measurements on the side-coupled drift tube linac (SCDTL) accelerating structure

    International Nuclear Information System (INIS)

    Picardi, L.; Ronsivalle, C.; Spataro, B.

    2000-01-01

    The 3 GHz linac section designed for the low energy (7-65 MeV) part of TOP (therapy oncological protons) linac (Picardi et al., 1997, 1996), operating at 3 GHz frequency and in π/2 mode, consists of eight modules of the structure SCDTL (side-coupled drift tube linac). The first module is designed to accelerate 7 MeV protons up to 13.4 MeV, and a prototype is presently under construction. Electromagnetic field calculations of the non-axisymmetric cavities carried out by using MAFIA 3D code (Weiland, 1986) gave the RF wall losses and the full mode spectrum. Two prototypes, an aluminium model of the first quintuplet and a copper model of the last triplet of the module, were built in order to check the complex 3D properties of the structure, and to refine the tuning procedure. This paper reports the results of the 3D numerical simulations about the RF properties of the first module and of some RF measurements on the prototypes. The beam dynamics study results in the SCDTL section are discussed as well

  3. Thickness measurement by two-sided step-heating thermal imaging

    Science.gov (United States)

    Li, Xiaoli; Tao, Ning; Sun, J. G.; Zhang, Cunlin; Zhao, Yuejin

    2018-01-01

    Infrared thermal imaging is a promising nondestructive technique for thickness prediction. However, it is usually thought to be only appropriate for testing the thickness of thin objects or near-surface structures. In this study, we present a new two-sided step-heating thermal imaging method which employed a low-cost portable halogen lamp as the heating source and verified it with two stainless steel step wedges with thicknesses ranging from 5 mm to 24 mm. We first derived the one-dimensional step-heating thermography theory with the consideration of warm-up time of the lamp, and then applied the nonlinear regression method to fit the experimental data by the derived function to determine the thickness. After evaluating the reliability and accuracy of the experimental results, we concluded that this method is capable of testing thick objects. In addition, we provided the criterions for both the required data length and the applicable thickness range of the testing material. It is evident that this method will broaden the thermal imaging application for thickness measurement.

  4. Understanding energy consumption behaviors in order to adapt demand response measures

    Energy Technology Data Exchange (ETDEWEB)

    Vassileva, Iana; Wallin, Fredrik; Dahlquist, Erik [Malardalen University (Sweden)], email: iana.vassileva@mdh.se, email: fredrik.wallin@mdh.se, email: erik.dahlquist@mdh.se

    2011-07-01

    When new price strategies and other demand-response measures are being established, it is important that amounts of electricity consumed and the potential for consumer participation be given serious consideration. It is important to encourage consumers to use less electricity if sustainable use of energy is to be achieved. Demand-response is a key component of the smart grids concept. So it is vital to get a comprehensive understanding of how different processes and factors influence the end use of energy. This paper presents an in-depth analysis of questionnaire responses from 2000 households in Vaxjo, Sweden. It sheds new light on the energy consumption behaviors of Swedish householders. Since 2008 Vaxjo householder customers have been able to check their own daily electricity consumption and get advice and tips, via a website provided by the local energy company, on how to lower the use of electricity. At the present time, of those responding to the questionnaire, this website is visited more frequently by people who live in houses than in apartments.

  5. Non-residential water demand model validated with extensive measurements and surveys

    NARCIS (Netherlands)

    Pieterse-Quirijns, I.; Blokker, E.J.M.; van der Blom, E.C.; Vreeburg, J.H.G.

    2013-01-01

    Existing Dutch guidelines for the design of the drinking water and hot water system of nonresidential buildings are based on outdated assumptions on peak water demand or on unfounded assumptions on hot water demand. They generally overestimate peak demand values required for the design of an

  6. Descentralizacion de la educacion: Financiamiento basado en la demanda. Tendencias del Desarrollo. (Decentralization of Education: Demand-Side Financing. Directions in Development.)

    Science.gov (United States)

    Patrinos, Harry Anthony; Ariasingam, David Lakshmanan

    Central government's supply-side expansions of schooling have not equally benefited all members of society, especially girls, indigenous peoples, tribal groups, disadvantaged minorities, and the poor. Public spending on education is often inefficient, higher education is subsidized at primary education's expense, and costs are becoming…

  7. Mapping and linking supply-and demand-side measures in climate-smart agriculture. A review

    NARCIS (Netherlands)

    Scherer, L.A.; Verburg, P.H.

    2017-01-01

    Climate change and food security are two of humanity’s greatest challenges and are highly interlinked. On the one hand, climate change puts pressure on food security. On the other hand, farming significantly contributes to anthropogenic greenhouse gas emissions. This calls for climate-smart

  8. PIV measurements of acoustic flow-induced vibration in a rectangular channel with co-axial side branches

    International Nuclear Information System (INIS)

    Li, Yanrong; Someya, Satoshi; Okamoto, Koji

    2010-01-01

    Systems with closed side-branches are liable to an excitation of sound, as called cavity tone. In this study, flow-induced acoustic resonances of piping systems containing closed side-branches were investigated experimentally. The present investigation on the coaxial closed side-branches is the first rudimentary study to measure the pressure at the downstream side opening of the cavity by microphone and to visualize the fluid flow in the cross-section by using PIV. High-time-resolved PIV has a possibility to analyze the velocity field and the relation between sound propagation and flow field. The fluid flows at different points in the cavity interact with some phase differences and the relation can be clarified. (author)

  9. Side-of-onset of Parkinson's disease in relation to neuropsychological measures.

    Science.gov (United States)

    Modestino, Edward J; Amenechi, Chioma; Reinhofer, AnnaMarie; O'Toole, Patrick

    2017-01-01

    Parkinson's disease (PD) usually emerges with a unilateral side-of-onset (left-onset: LOPD; right-onset: ROPD; Marinus & van Hilten, 2015) due to an asymmetrical degeneration of striatal dopaminergic neurons (Donnemiller et al., Brain , 135, 2012, 3348). This has led to a body of research exploring the cognitive, neuropsychological, and clinical differences between LOPD and ROPD (e.g., Verreyt et al., Neuropsychology Review , 21, 2011, 405). Thirty ROPD and 14 LOPD cases were drawn from a Boston clinic specializing in PD. Various cognitive and neuropsychological measures were used in an attempt to discover if there were indeed any differences between LOPD and ROPD in this cohort. For LOPD, duration of illness was found to be significantly greater than that of ROPD. However, further testing was able to confirm that despite this difference, it was not the cause of the other significant differences found. Furthermore, this increased duration was consistent with a previous study (Munhoz et al., Parkinsonism and Related Disorders , 19, 2013, 77). Performance on the Digit Span Backward (DSB) was found to be significantly poorer in LOPD than ROPD, suggesting compromised executive function in LOPD. Additionally, LOPD had significantly greater anxiety on the DASS Anxiety scales than ROPD. However, unlike Foster et al ( Cognitive and Behavioral Neurology , 23, 2010, 4), this increased anxiety could not account for the poorer performance on the DSB for LOPD. Finally, ROPD had significantly greater magical ideation than LOPD, which can be explained by the theory put forth by Brugger and Graves ( European Archives of Psychiatry , 247, 1997, 55). Clear and significant differences between LOPD and ROPD were found within our cohort. LOPD showed greater impairment of working memory, greater anxiety, and greater duration of illness-all independent of one another; whereas, those with ROPD had greater magical ideation, also independent of any other variables.

  10. Investigating Efficiency of Vector-Valued Intensity Measures in Seismic Demand Assessment of Concrete Dams

    Directory of Open Access Journals (Sweden)

    Mohammad Alembagheri

    2018-01-01

    Full Text Available The efficiency of vector-valued intensity measures for predicting the seismic demand in gravity dams is investigated. The Folsom gravity dam-reservoir coupled system is selected and numerically analyzed under a set of two-hundred actual ground motions. First, the well-defined scalar IMs are separately investigated, and then they are coupled to form two-parameter vector IMs. After that, IMs consisting of spectral acceleration at the first-mode natural period of the dam-reservoir system along with a measure of the spectral shape (the ratio of spectral acceleration at a second period to the first-mode spectral acceleration value are considered. It is attempted to determine the optimal second period by categorizing the spectral acceleration at the first-mode period of vibration. The efficiency of the proposed vector IMs is compared with scalar ones considering various structural responses as EDPs. Finally, the probabilistic seismic behavior of the dam is investigated by calculating its fragility curves employing scalar and vector IMs considering the effect of zero response values.

  11. Potential errors in optical density measurements due to scanning side in EBT and EBT2 Gafchromic film dosimetry.

    Science.gov (United States)

    Desroches, Joannie; Bouchard, Hugo; Lacroix, Frédéric

    2010-04-01

    The purpose of this study is to determine the effect on the measured optical density of scanning on either side of a Gafchromic EBT and EBT2 film using an Epson (Epson Canada Ltd., Toronto, Ontario) 10000XL flat bed scanner. Calibration curves were constructed using EBT2 film scanned in landscape orientation in both reflection and transmission mode on an Epson 10000XL scanner. Calibration curves were also constructed using EBT film. Potential errors due to an optical density difference from scanning the film on either side ("face up" or "face down") were simulated. Scanning the film face up or face down on the scanner bed while keeping the film angular orientation constant affects the measured optical density when scanning in reflection mode. In contrast, no statistically significant effect was seen when scanning in transmission mode. This effect can significantly affect relative and absolute dose measurements. As an application example, the authors demonstrate potential errors of 17.8% by inverting the film scanning side on the gamma index for 3%-3 mm criteria on a head and neck intensity modulated radiotherapy plan, and errors in absolute dose measurements ranging from 10% to 35% between 2 and 5 Gy. Process consistency is the key to obtaining accurate and precise results in Gafchromic film dosimetry. When scanning in reflection mode, care must be taken to place the film consistently on the same side on the scanner bed.

  12. Technical Note: Potential errors in optical density measurements due to scanning side in EBT and EBT2 Gafchromic film dosimetry

    International Nuclear Information System (INIS)

    Desroches, Joannie; Bouchard, Hugo; Lacroix, Frederic

    2010-01-01

    Purpose: The purpose of this study is to determine the effect on the measured optical density of scanning on either side of a Gafchromic EBT and EBT2 film using an Epson (Epson Canada Ltd., Toronto, Ontario) 10000XL flat bed scanner. Methods: Calibration curves were constructed using EBT2 film scanned in landscape orientation in both reflection and transmission mode on an Epson 10000XL scanner. Calibration curves were also constructed using EBT film. Potential errors due to an optical density difference from scanning the film on either side (''face up'' or ''face down'') were simulated. Results: Scanning the film face up or face down on the scanner bed while keeping the film angular orientation constant affects the measured optical density when scanning in reflection mode. In contrast, no statistically significant effect was seen when scanning in transmission mode. This effect can significantly affect relative and absolute dose measurements. As an application example, the authors demonstrate potential errors of 17.8% by inverting the film scanning side on the gamma index for 3%--3 mm criteria on a head and neck intensity modulated radiotherapy plan, and errors in absolute dose measurements ranging from 10% to 35% between 2 and 5 Gy. Conclusions: Process consistency is the key to obtaining accurate and precise results in Gafchromic film dosimetry. When scanning in reflection mode, care must be taken to place the film consistently on the same side on the scanner bed.

  13. Movement disorders in patients with schizophrenia and in their siblings: symptoms, side effects and mechanical measurements

    NARCIS (Netherlands)

    Koning, J.P.F.

    2011-01-01

    This thesis focuses on several aspects of movement disorders in patients with schizophrenia and in their unaffected siblings. The main hypothesis is that movement disorders are not just side effects of antipsychotic medication but may also be symptoms of the illness itself and are related to the

  14. French bio-diesel demand and promoting measures analysis by 2010; Analyse de la demande et des mesures de promotion francaises du biodiesel a l'horizon 2010

    Energy Technology Data Exchange (ETDEWEB)

    Bernard, F

    2008-02-15

    The researches presented aim at assessing bio-diesel promoting measures under consideration in France by 2010. This assessment is based on a deep study of French bio-diesel demand. The use of a linear model for optimizing the whole French refining industry costs allow us to take into account the physicochemical characteristics of bio-diesel useful for gas oil blending operation. This researches show that bio-diesel can be incorporated up to 27% blend in volume to diesel fuel without major technical problem. A decomposition of the value allotted to the bio-diesel by French refiners according to its physicochemical characteristics shows that energy content is the most disadvantageous characteristics for bio-diesel incorporation and, up to 17%, density become also constraining. However, the low bio-diesel sulphur content could become interesting from now to 2010. On the basis of this bio-diesel demand analysis, we proceed to an external coupling of an agro-industrial model of bio-diesel supply with the French refining model. Thus, we study the impact of the 2010 French bio-diesel consumption objective on agricultural surface need, the competitiveness of the bio-diesel, the reduction of greenhouse gases emissions and the trade balance of the petroleum products. On this basis, we propose a critical analysis of French bio-diesel promoting measures under consideration by 2010. (author)

  15. The bright side of snow cover effects on PV production - How to lower the seasonal mismatch between electricity supply and demand in a fully renewable Switzerland

    Science.gov (United States)

    Kahl, Annelen; Dujardin, Jérôme; Dupuis, Sonia; Lehning, Michael

    2017-04-01

    One of the major problems with solar PV in the context of a fully renewable electricity production at mid-latitudes is the trend of higher production in summer and lower production in winter. This trend is most often exactly opposite to demand patterns, causing a seasonal mismatch that requires extensive balancing power from other production sources or large storage capacities. Which possibilities do we have to bring PV production into closer correlation with demand? This question motivated our research and in response we investigated the effects of placing PV panels at different tilt angles in regions with extensive snow cover to increase winter production from ground reflected short wave radiation. The aim of this project is therefore to quantify the effect of varying snow cover duration (SCD) and of panel tilt angle on the annual total production and on production during winter months when electricity is most needed. We chose Switzerland as ideal test site, because it has a wide range of snow cover conditions and a high potential for renewable electricity production. But methods can be applied to other regions of comparable conditions for snow cover and irradiance. Our analysis can be separated into two steps: 1. A systematic, GIS and satellite-based analysis for all of Switzerland: We use time series of satellite-derived irradiance, and snow cover characteristics together with land surface cover types and elevation information to quantify the environmental conditions and to estimate potential production and ideal tilt angles. 2. A scenario-based analysis that contrasts the production patterns of different placement scenarios for PV panels in urban, rural and mountainous areas. We invoke a model of a fully renewable electricity system (including Switzerland's large hydropower system) at national level to compute the electricity import and storage capacity that will be required to balance the remaining mismatch between production and demand to further illuminate

  16. Application of one-sided stress wave velocity measurement technique to evaluate freeze-thaw damage in concrete

    International Nuclear Information System (INIS)

    Lee, Joon Hyun; Park, Won Su

    1998-01-01

    It is well recognized that damage resulting from freeze-thaw cycles is a serious problems causing deterioration and degradation of concrete. In general, freeze-thaw cycles change the microstructure of the concrete ultimately leading to internal stresses and cracking. In this study, a new method for one-sided stress wave velocity measurement has been applied to evaluate freeze-thaw damage in concrete by monitoring the velocity change of longitudinal and surface waves. The freeze-thaw damage was induced in a 400 x 150 x 100 mm concrete specimen in accordance with ASTM C666 using s commercial testing apparatus. A cycle consisted of a variation of the temperature from -14 to 4 degrees Celsius. A cycle takes 4-5 hours with approximately equal times devoted to freezing-thawing. Measurement of longitudinal and surface wave velocities based on one-sided stress wave velocity measurement technique was made every 5 freeze-thaw cycle. The variation of longitudinal and surface wave velocities due to increasing freeze-thaw damage is demonstrated and compared to determine which one is more effective to monitor freeze-thaw cyclic damage progress. The variation in longitudinal wave velocity measured by one-sided technique is also compared with that measured by the conventional through transmission technique.

  17. Inkwells for on-demand deposition rate measurement in aerosol-jet based 3D printing

    International Nuclear Information System (INIS)

    Gu, Yuan; Das, Siddhartha; Gutierrez, David; Hines, D R

    2017-01-01

    Aerosol-jet printing (AJP) is an important direct-write printing technology based on additive manufacturing methods. Numerous research groups have utilized AJP for the fabrication of electronic circuits and devices. However, there has not been any real-time or even any on-demand method for quantitatively measuring and/or setting the deposition rate of an AJ ink stream. In this paper, we present a method for measuring the deposition rate of an AJ ink stream by printing into an array of inkwells that were fabricated using photolithography and were characterized using x-ray tomography and optical profilometry. These inkwell arrays were then used to establish a set of deposition rates namely 0.0011, 0.0024, 0.0035, 0.0046 and 0.0059 mm 3 s −1 that were subsequently compared with independently-measured deposition rates obtained by printing the ink stream into a weighing pan for a specified time and calculating the resulting deposition rate from the weight of the printed sample. From this comparison, it is observed that, for a human operator, the error in setting a specific deposition rate is less for inkwell fill times greater than 3 s and greater for fill times less than 3 s. This observation indicates that the average volume of an inkwell array should be at least three times the desired deposition rate ( V inkwell   >  3 R ). It was also observed that when the diameter of the inkwell was only slightly larger than the ink stream diameter, the ink uniformly wets the sidewall of the inkwell and results in a well filled inkwell for which the point at which it is just fully filled is easily observable. Finally, the interactions of the ink with both ‘philic’ and ‘phobic’ inkwells were studied illustrating the ability to use inkwells of various materials for setting the desired deposition rates for a variety of AJ printable inks. (technical note)

  18. Individual and work-unit measures of psychological demands and decision latitude and the use of antihypertensive medication

    DEFF Research Database (Denmark)

    Daugaard, S; Andersen, J H; Grynderup, Matias Brødsgaard

    2015-01-01

    were associated with the purchase of prescribed antihypertensive medication among women. This effect was present on both the work-unit and the individual level. Among men there were no associations. The lack of interaction between psychological demands and decision latitude did not support the job......PURPOSE: To analyse whether psychological demands and decision latitude measured on individual and work-unit level were related to prescription of antihypertensive medication. METHODS: A total of 3,421 women and 897 men within 388 small work units completed a questionnaire concerning psychological...... working conditions according to the job strain model. Mean levels of psychological demands and decision latitude were computed for each work unit to obtain exposure measures that were less influenced by reporting bias. Dispensed antihypertensive medication prescriptions were identified in The Danish...

  19. Spectral-Domain Measurement of Strain Sensitivity of a Two-Mode Birefringent Side-Hole Fiber

    Directory of Open Access Journals (Sweden)

    Waclaw Urbanczyk

    2012-09-01

    Full Text Available The strain sensitivity of a two-mode birefringent side-hole fiber is measured in the spectral domain. In a simple experimental setup comprising a broadband source, a polarizer, a two-mode birefringent side-hole fiber under varied elongations, an analyzer and a compact spectrometer, the spectral interferograms are resolved. These are characterized by the equalization wavelength at which spectral interference fringes have the highest visibility (the largest period due to the zero group optical path difference between the fundamental, the LP01 mode and the higher-order, the LP11 mode. The spectral interferograms with the equalization wavelength are processed to retrieve the phase as a function of the wavelength. From the retrieved phase functions corresponding to different elongations of a two-mode birefringent side-hole fiber under test, the spectral strain sensitivity is obtained. Using this approach, the intermodal spectral strain sensitivity was measured for both x and y polarizations. Moreover, the spectral polarimetric sensitivity to strain was measured for the fundamental mode when a birefringent delay line was used in tandem with the fiber. Its spectral dependence was also compared with that obtained from a shift of the spectral interferograms not including the equalization wavelength, and good agreement was confirmed.

  20. Comparison of two self-reported measures of physical work demands in hospital personnel: A cross-sectional study

    Directory of Open Access Journals (Sweden)

    Jensen Jette N

    2008-04-01

    Full Text Available Abstract Background Low back pain (LBP is a frequent health complaint among health care personnel. Several work tasks and working postures are associated with an increased risk of LBP. The aim of this study was to compare two self-reported measures of physical demands and their association with LBP (the daily number of patient handling tasks and Hollmann's physical load index. Methods A questionnaire was distributed to 535 hospital employees in a psychiatric and an orthopedic ward in a Danish hospital. Of these 411 (77% filled in and returned the questionnaire. Only the 373 respondents who had non-missing values on both measures of physical demands were included in the analyses. The distribution of physical demands in different job groups and wards are presented, variance analysis models are employed, and logistic regression analysis is used to analyze the association between measures of physical demands and LBP. Results In combination, hospital ward and job category explained 56.6% and 23.3% of the variance in the self-reported physical demands measured as the daily number of patient handling tasks and as the score on the physical load index, respectively. When comparing the 6% with the highest exposure the prevalence odds ratio (POR for LBP was 5.38 (95% CI 2.03–14.29 in the group performing more than 10 patient handling tasks per day and 2.29 (95% CI 0.93–5.66 in the group with the highest score on the physical load index. Conclusion In specialized hospital wards the daily number of patient handling tasks seems to be a more feasible measure of exposure when assessing the risk of LBP compared to more advanced measures of physical load on the lower lumbar spine.

  1. Derivation of confidence intervals of service measures in a base-stock inventory control system with low-frequent demand

    DEFF Research Database (Denmark)

    Larsen, Christian

    We explore a base-stock system with backlogging where the demand process is a compound renewal process and the compound element is a delayed geometric distribution. For this setting it is proven in [4] that the long-run average service measures order fill rate (OFR) and volume fill rate (VFR) are...

  2. Derivation of confidence intervals of service measures in a base-stock inventory control system with low-frequent demand

    DEFF Research Database (Denmark)

    Larsen, Christian

    2011-01-01

    We explore a base-stock system with backlogging where the demand process is a compound renewal process and the compound element is a delayed geometric distribution. For this setting it holds that the long-run average service measures order fill rate (OFR) and volume fill rate (VFR) are equal in v...

  3. Measuring the impact of negative demand shocks on car dealer networks

    NARCIS (Netherlands)

    Albuquerque, P.; Bronnenberg, B.J.

    2012-01-01

    The goal of this paper is to study the behavior of consumers, dealers, and manufacturers in the car sector and present an approach that can be used by managers and policy makers to investigate the impact of significant demand shocks on profits, prices, and dealer networks. More specifically, we

  4. Strategic planning of building stock. Adjusting quality of demand and supply focusing on energy saving measures

    International Nuclear Information System (INIS)

    2007-06-01

    This working book aims at supporting the strategic supply management and the associated daily practice of housing management, from vision to implementation. Strategic supply management is defined as offering living qualities that are in demand now and in the future. [mk] [nl

  5. Demand side management project for Tenaga Nasional Berhad: Energy efficiency study: Jabatan Kerja Raya (JKR) complex. Final report. Export trade information

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    This study, conducted by the California Energy Commission, was funded by the U.S. Trade and Development Agency. The report focuses on energy efficiency and conservation measures at the Jabatan Kerja Raya (JKR) Complex in Malaysia for Tenaga Nasional Berhad (TNB). The study is divided into the following contents: Preface; (1.0) Executive Summary; (2.0) Facility Background and Site Information; (3.0) Site Energy Use; (4.0) Energy Using Systems; (5.0) On-Site Electricity and Energy Generation; (6.0) Technical Project Summary; Figures, Tables, and Appendices.

  6. Demand-side management project for Tenaga Nasional Berhad: Energy efficiency study: Institut Teknologi Mara (ITM) complex. Final report. Export trade information

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    This study, conducted by the California Energy Commission, was funded by the U.S. Trade and Development Agency. The report focuses on energy efficiency and conservation measures at the Institut Teknologi Mara (ITM) Complex for Tenaga Nasional Berhad in Malaysia. The study is divided into the following sections: Preface; (1.0) Executive Summary; (2.0) Facility Background and Site Information; (3.0) Site Energy Use; (4.0) Energy Using Systems; (5.0) On-Site Electricity and Energy Generation; (6.0) Technical Project Summary; Figures, Tables, Appendices.

  7. Measurement of in-bore side loads and comparison to first maximum yaw

    Directory of Open Access Journals (Sweden)

    Donald E. Carlucci

    2016-04-01

    Full Text Available In-bore yaw of a projectile in a gun tube has been shown to result in range loss if the yaw is significant. An attempt was made to determine if relationships between in-bore yaw and projectile First Maximum Yaw (FMY were observable. Experiments were conducted in which pressure transducers were mounted near the muzzle of a 155 mm cannon in three sets of four. Each set formed a cruciform pattern to obtain a differential pressure across the projectile. These data were then integrated to form a picture of what the overall pressure distribution was along the side of the projectile. The pressure distribution was used to determine a magnitude and direction of the overturning moment acting on the projectile. This moment and its resulting angular acceleration were then compared to the actual first maximum yaw observed in the test. The degree of correlation was examined using various statistical techniques. Overall uncertainty in the projectile dynamics was between 20% and 40% of the mean values of FMY.

  8. Indirect two-sided relative ranking: a robust similarity measure for gene expression data

    Directory of Open Access Journals (Sweden)

    Licamele Louis

    2010-03-01

    Full Text Available Abstract Background There is a large amount of gene expression data that exists in the public domain. This data has been generated under a variety of experimental conditions. Unfortunately, these experimental variations have generally prevented researchers from accurately comparing and combining this wealth of data, which still hides many novel insights. Results In this paper we present a new method, which we refer to as indirect two-sided relative ranking, for comparing gene expression profiles that is robust to variations in experimental conditions. This method extends the current best approach, which is based on comparing the correlations of the up and down regulated genes, by introducing a comparison based on the correlations in rankings across the entire database. Because our method is robust to experimental variations, it allows a greater variety of gene expression data to be combined, which, as we show, leads to richer scientific discoveries. Conclusions We demonstrate the benefit of our proposed indirect method on several datasets. We first evaluate the ability of the indirect method to retrieve compounds with similar therapeutic effects across known experimental barriers, namely vehicle and batch effects, on two independent datasets (one private and one public. We show that our indirect method is able to significantly improve upon the previous state-of-the-art method with a substantial improvement in recall at rank 10 of 97.03% and 49.44%, on each dataset, respectively. Next, we demonstrate that our indirect method results in improved accuracy for classification in several additional datasets. These datasets demonstrate the use of our indirect method for classifying cancer subtypes, predicting drug sensitivity/resistance, and classifying (related cell types. Even in the absence of a known (i.e., labeled experimental barrier, the improvement of the indirect method in each of these datasets is statistically significant.

  9. Side Effects

    Science.gov (United States)

    Side effects are problems that occur when cancer treatment affects healthy tissues or organs. Learn about side effects caused by cancer treatment. Know what signs and symptoms to call your doctor about. Learn about treatments for side effects.

  10. Study of Train-Side Passive Magnetic Measurements with Applications to Train Localization

    Directory of Open Access Journals (Sweden)

    Oliver Heirich

    2017-01-01

    Full Text Available Passive magnetic sensors measure the magnetic field density in three axes and are often integrated on a single chip. These low-cost sensors are widely used in car navigation as well as in battery powered navigation equipment such as smartphones as part of an electronic compass. We focus on a train localization application with multiple, exclusively onboard sensors and a track map. This approach is considered as a base technology for future railway applications such as collision avoidance systems or autonomous train driving. In this paper, we address the following question: how beneficial are passive magnetic measurements for train localization? We present and analyze measurements of two different magnetometers recorded on a regional train at regular passenger service. We show promising correlations of the measurements with the track positions and the traveled switch way. The processed data reveals that the railway environment has repeatable, location-dependent magnetic signatures. This is considered as a novel approach to train localization, as the use of these magnetic signals at first view is not obvious. The proposed methods based on passive magnetic measurements show a high potential to be integrated in new and existing train localization approaches.

  11. A facile electrode preparation method for accurate electrochemical measurements of double-side-coated electrode from commercial Li-ion batteries

    Science.gov (United States)

    Zhou, Ge; Wang, Qiyu; Wang, Shuo; Ling, Shigang; Zheng, Jieyun; Yu, Xiqian; Li, Hong

    2018-04-01

    The post mortem electrochemical analysis, including charge-discharge and electrochemical impedance spectroscopy (EIS) measurements, are critical steps for revealing the failure mechanisms of commercial lithium-ion batteries (LIBs). These post measurements usually require the reassembling of coin-cell with electrode which is often double-side-coated in commercial LIBs. It is difficult to use such double-side-coated electrode to perform accurate electrochemical measurements because the back side of the electrode is coated with active materials, rather than single-side-coated electrode that is often used in coin-cell measurements. In this study, we report a facile tape-covering sample preparation method, which can effectively suppress the influence of back side of the double-side-coated electrodes on capacity and EIS measurements in coin-cells. By tape-covering the unwanted side, the areal capacity of the desired investigated side of the electrode has been accurately measured with an experimental error of about 0.5% at various current densities, and accurate EIS measurements and analysis have been conducted as well.

  12. A portable single-sided magnet system for remote NMR measurements of pulmonary function.

    Science.gov (United States)

    Dabaghyan, Mikayel; Muradyan, Iga; Hrovat, Alan; Butler, James; Frederick, Eric; Zhou, Feng; Kyriazis, Angelos; Hardin, Charles; Patz, Samuel; Hrovat, Mirko

    2014-12-01

    In this work, we report initial results from a light-weight, low field magnetic resonance device designed to make relative pulmonary density measurements at the bedside. The development of this device necessarily involves special considerations for the magnet, RF and data acquisition schemes as well as a careful analysis of what is needed to provide useful information in the ICU. A homogeneous field region is created remotely from the surface of the magnet such that when the magnet is placed against the chest, an NMR signal is measured from a small volume in the lung. In order to achieve portability, one must trade off field strength and therefore spatial resolution. We report initial measurements from a ping-pong ball size region in the lung as a function of lung volume. As expected, we measured decreased signal at larger lung volumes since lung density decreases with increasing lung volume. Using a CPMG sequence with ΔTE=3.5 ms and a 20 echo train, a signal to noise ratio ~1100 was obtained from an 8.8mT planar magnet after signal averaging for 43 s. This is the first demonstration of NMR measurements made on a human lung with a light-weight planar NMR device. We argue that very low spatial resolution measurements of different lobar lung regions will provide useful diagnostic information for clinicians treating Acute Respiratory Distress Syndrome as clinicians want to avoid ventilator pressures that cause either lung over distension (too much pressure) or lung collapse (too little pressure). Copyright © 2014 John Wiley & Sons, Ltd.

  13. Validity and usefulness of a single-item measure of patient-reported bother from side effects of cancer therapy.

    Science.gov (United States)

    Pearman, Timothy P; Beaumont, Jennifer L; Mroczek, Daniel; O'Connor, Mary; Cella, David

    2018-03-01

    The improving efficacy of cancer treatment has resulted in an increasing array of treatment-related symptoms and associated burdens imposed on individuals undergoing aggressive treatment of their disease. Often, clinical trials compare therapies that have different types, and severities, of adverse effects. Whether rated by clinicians or patients themselves, it can be difficult to know which side effect profile is more disruptive or bothersome to patients. A simple summary index of bother can help to adjudicate the variability in adverse effects across treatments being compared with each other. Across 4 studies, a total of 5765 patients enrolled in cooperative group studies and industry-sponsored clinical trials were the subjects of the current study. Patients were diagnosed with a range of primary cancer sites, including bladder, brain, breast, colon/rectum, head/neck, hepatobiliary, kidney, lung, ovary, pancreas, and prostate as well as leukemia and lymphoma. All patients were administered the Functional Assessment of Cancer Therapy-General version (FACT-G). The single item "I am bothered by side effects of treatment" (GP5), rated on a 5-point Likert scale, is part of the FACT-G. To determine its validity as a useful summary measure from the patient perspective, it was correlated with individual and aggregated clinician-rated adverse events and patient reports of their general ability to enjoy life. Analyses of pharmaceutical trials demonstrated that mean GP5 scores ("I am bothered by side effects of treatment") significantly differed by maximum adverse event grade (PEffect sizes ranged from 0.13 to 0.46. Analyses of cooperative group trials demonstrated a significant correlation between GP5 and item GF3 ("I am able to enjoy life") in the predicted direction. The single FACT-G item "I am bothered by side effects of treatment" is significantly associated with clinician-reported adverse events and with patients' ability to enjoy their lives. It has promise as an

  14. Dew as an Adaptation Measure to Meet Agricultural and Reforestation Water Demand in a Changing Climate

    Science.gov (United States)

    Tomaszkiewicz, Marlene; Abou Najm, Majdi; Alameddine, Ibrahim; El Fadel, Mutasem

    2014-05-01

    Dew harvesting, believed to be an ancient technique, has recently re-emerged as a viable and sustainable water resource. Nightly yields are relatively low, yet non-negligible, and dew events occur more frequently than rainfall promoting its effectiveness, particularly in arid and semi-arid regions. In this study, we demonstrate how dew can be harvested and subsequently used for small-scale irrigation to meet agricultural and reforestation water demand. Polyethylene dew harvesting systems were constructed and placed in the field. Dew was harvested as a result of the radiative cooling during the night, thus allowing dew formation under conditions of high humidity. Condensed dew formed upon the planar surface was collected by gravity. Water demand for selected crops and trees within a pilot study area (Lebanon) was estimated using a deficit irrigation model. Simulations of water demand requirements of various plants and surfaces were performed and compared to dew volumes to assess the ability of the system to meet all or in part the plant water demands across seasons. Data from the polyethylene low-cost dew condensers have shown that within the pilot study, average nightly dew yields were 0.1 L m-2 of condensing surface with a maximum yield of 0.4 L m-2. Dew events occurred generally more frequently than precipitation events, with an estimated 40% of nights producing dew condensate. This translates to 50 mm of equivalent rainfall on average (during dew nights), with a maximum of 200 mm in one night, if one assumes using drip irrigation over a seedling within a 20 cm2 area. Using a simple deficit irrigation model, it was demonstrated that crops such as the tomato plant, which typically has a growing season during the dry summer, can potentially be irrigated solely by dew, thus eliminating the need for traditional irrigation sources. Similarly, young tree seedlings, such as the cedar tree, can depend upon dew as a primary water resource. Moreover, based on similar

  15. Demand response policies for the implementation of smart grids

    NARCIS (Netherlands)

    Koliou, E.

    2016-01-01

    With the grasp of a smart grid in sight, discussions have shifted the focus of system security measures away from generation capacity; apart from modifying the supply side, demand may also be exploited to keep the system in balance. Specifically, Demand Response (DR) is the concept of consumer load

  16. 'A thorn in the side of European geodesy': measuring Paris-Greenwich longitude by electric telegraph.

    Science.gov (United States)

    Kershaw, Michael

    2014-12-01

    The difference in longitude between the observatories of Paris and Greenwich was long of fundamental importance to geodesy, navigation and timekeeping. Measured many times and by many different means since the seventeenth century, the preferred method of the later nineteenth and early twentieth centuries made use of the electric telegraph. I describe here for the first time the four Paris-Greenwich telegraphic longitude determinations made between 1854 and 1902. Despite contemporary faith in the new technique, the first was soon found to be inaccurate; the second was a failure, ending in Anglo-French dispute over whose result was to be trusted; the third failed in exactly the same way; and when eventually the fourth was presented as a success, the evidence for that success was far from clear-cut. I use this as a case study in precision measurement, showing how mutual grounding between different measurement techniques, in the search for agreement between them, was an important force for change and improvement. I also show that better precision had more to do with the gradually improving methods of astronomical, time determination than with the singular innovation of the telegraph, thus emphasizing the importance of what have been described as 'observatory techniques' to nineteenth-century practices of precision measurement.

  17. Magnification-temperature correlation: The dark side of integrated Sachs-Wolfe measurements

    International Nuclear Information System (INIS)

    LoVerde, Marilena; Hui, Lam; Gaztanaga, Enrique

    2007-01-01

    Integrated Sachs-Wolfe (ISW) measurements, which involve cross-correlating the microwave background anisotropies with the foreground large-scale structure (e.g. traced by galaxies/quasars), have proven to be an interesting probe of dark energy. We show that magnification bias, which is the inevitable modulation of the foreground number counts by gravitational lensing, alters both the scale dependence and amplitude of the observed ISW signal. This is true especially at high redshifts because (1) the intrinsic galaxy-temperature signal diminishes greatly back in the matter-dominated era, (2) the lensing efficiency increases with redshift and (3) the number count slope generally steepens with redshift in a magnitude limited sample. At z > or approx. 2, the magnification-temperature correlation dominates over the intrinsic galaxy-temperature correlation and causes the observed ISW signal to increase with redshift, despite dark energy subdominance--a result of the fact that magnification probes structures all the way from the observer to the sources. Ignoring magnification bias therefore can lead to (significantly) erroneous conclusions about dark energy. While the lensing modulation opens up an interesting high z window for ISW measurements, high redshift measurements are not expected to add much new information to low redshift ones if dark energy is indeed the cosmological constant. This is because lensing introduces significant covariance across redshifts. The most compelling reasons for pursuing high redshift ISW measurements are to look for potential surprises such as early dark energy domination or signatures of modified gravity. We conclude with a discussion of existing measurements, the highest redshift of which is at the margin of being sensitive to the magnification effect. We also develop a formalism which might be of more general interest: to predict biases in estimating parameters when certain physical effects are ignored in interpreting observations

  18. Effects of two hospital bed design features on physical demands and usability during brake engagement and patient transportation: a repeated measures experimental study.

    Science.gov (United States)

    Kim, Sunwook; Barker, Linsey M; Jia, Bochen; Agnew, Michael J; Nussbaum, Maury A

    2009-03-01

    Work-related musculoskeletal disorders (WMSDs) are prevalent among healthcare workers worldwide. While existing research has focused on patient-handling techniques during activities which require direct patient contact (e.g., patient transfer), nursing tasks also involve other patient-handling activities, such as engaging bed brakes and transporting patients in beds, which could render healthcare workers at risk of developing WMSDs. Effectiveness of hospital bed design features (brake pedal location and steering-assistance) was evaluated in terms of physical demands and usability during brake engagement and patient transportation tasks. Two laboratory-based studies were conducted. In simulated brake engagement tasks, three brake pedal locations (head-end vs. foot-end vs. side of a bed) and two hands conditions (hands-free vs. hands-occupied) were manipulated. Additionally, both in-room and corridor patient transportation tasks were simulated, in which activation of steering-assistance features (5th wheel and/or front wheel caster lock) and two patient masses were manipulated. Nine novice participants were recruited from the local student population and community for each study. During brake engagement, trunk flexion angle, task completion time, and questionnaires were used to quantify postural comfort and usability. For patient transportation, dependent measures were hand forces and questionnaire responses. Brake pedal locations and steering-assistance features in hospital beds had significant effects on physical demands and usability during brake engagement and patient transportation tasks. Specifically, a brake pedal at the head-end of a bed increased trunk flexion by 74-224% and completion time by 53-74%, compared to other pedal locations. Participants reported greater overall perceived difficulty and less postural comfort with the brake pedal at the head-end. During in-room transportation, participants generally reported "Neither Low nor High" physical demands

  19. Demand side management of electric car charging

    DEFF Research Database (Denmark)

    Finn, P.; Fitzpatrick, C.; Connolly, David

    2012-01-01

    the purchase of alternative energy vehicles in an effort to achieve 10% EV (electric vehicle) penetration in the country's road fleet by 2020. The replacement of ICE (internal combustion engine) vehicles with EV equivalents poses challenges for grid operators while simultaneously offering opportunities...

  20. Demand Side Management in the Smart Grid

    DEFF Research Database (Denmark)

    Costanzo, Giuseppe Tommaso

    . Therefore it does not guarantee optimality in the long run. Two approaches are investigated within predictive control: the first is based on grey-box modelling and quadratic Model Predictive Control (MPC), while the second is based on Artificial Intelligence modelling and gradient-free optimisation......, together with the growing urbanisation, the in- creasing popularity of electricity-based climate control systems and electricity-based private transportation, challenges the distribution systems operators to run the low voltage grids with small safety margins. Depending on the customer and the specific...

  1. Demand side management for smart district heating

    DEFF Research Database (Denmark)

    Big, Oovidiu; Li, Hongwei; Svendsen, Svend

    2016-01-01

    between 25% and 35%. By making the light renovation, the heating system needs a minimum supply water temperature of 58ºC in order to cover the thermal comfort. Through extensive renovation, the supply water temperature could be reduced to 50ºC which makes it possible to transform the District Heating...... Temperature into Low Temperature. The building time constant for the extensive renovation is 86 hours which is double than a light building renovation and 53 hours higher than a non-renovated building. In the end of the paper is developed a formula which has the purpose to validate the results of virtual...... simulations. The relative percentage difference between the theoretical calculation and the virtual simulation results are between 2.5% and 17.5%....

  2. Measuring the Non-Observed Economy: A Survey-Based Study of Demand in the Korean Prostitution Market

    OpenAIRE

    KIM, WONSOON

    2013-01-01

    Illegal activities are by their nature difficult to measure, despite the potentially important role they play in the economy. Their inclusion in Korea’s GDP is necessary to reflect Korea’s national economy more precisely. In this paper, I use a variety of survey methods to provide an estimate of the incidence of prostitution. I estimate the demand for prostitution services in Korea by conducting stratified random sampling surveys of 671 Korean adult males. Because the survey topic was sensiti...

  3. Water and Climate Impacts on Power System Operations: The Importance of Cooling Systems and Demand Response Measures

    Energy Technology Data Exchange (ETDEWEB)

    Macknick, Jordan [National Renewable Energy Lab. (NREL), Golden, CO (United States); Zhou, Ella [National Renewable Energy Lab. (NREL), Golden, CO (United States); O' Connell, Matthew [National Renewable Energy Lab. (NREL), Golden, CO (United States); Brinkman, Gregory [National Renewable Energy Lab. (NREL), Golden, CO (United States); Miara, Ariel [City College of New York, NY (United States); Ibanez, Eduardo [GE Energy Connections, Atlanta, GA (United States); Hummon, Marissa [Tendril, Denver, CO (United States)

    2016-12-01

    The U.S. electricity sector is highly dependent upon water resources; changes in water temperatures and water availability can affect operational costs and the reliability of power systems. Despite the importance of water for power system operations, the effects of changes in water characteristics on multiple generators in a system are generally not modeled. Moreover, demand response measures, which can change the magnitude and timing of loads and can have beneficial impacts on power system operations, have not yet been evaluated in the context of water-related power vulnerabilities. This effort provides a first comprehensive vulnerability and cost analysis of water-related impacts on a modeled power system and the potential for demand response measures to address vulnerability and cost concerns. This study uniquely combines outputs and inputs of a water and power plant system model, production cost, model, and relative capacity value model to look at variations in cooling systems, policy-related thermal curtailments, and demand response measures to characterize costs and vulnerability for a test system. Twenty-five scenarios over the course of one year are considered: a baseline scenario as well as a suite of scenarios to evaluate six cooling system combinations, the inclusion or exclusion of policy-related thermal curtailments, and the inclusion or exclusion of demand response measures. A water and power plant system model is utilized to identify changes in power plant efficiencies resulting from ambient conditions, a production cost model operating at an hourly scale is used to calculate generation technology dispatch and costs, and a relative capacity value model is used to evaluate expected loss of carrying capacity for the test system.

  4. A one-item workability measure mediates work demands, individual resources and health in the prediction of sickness absence.

    Science.gov (United States)

    Thorsen, Sannie Vester; Burr, Hermann; Diderichsen, Finn; Bjorner, Jakob Bue

    2013-10-01

    The study tested the hypothesis that a one-item workability measure represented an assessment of the fit between resources (the individuals' physical and mental health and functioning) and workplace demands and that this resource/demand fit was a mediator in the prediction of sickness absence. We also estimated the relative importance of health and work environment for workability and sickness absence. Baseline data were collected within a Danish work and health survey (3,214 men and 3,529 women) and followed up in a register of sickness absence. Probit regression analysis with workability as mediator was performed for a binary outcome of sickness absence. The predictors in the analysis were as follows: age, social class, physical health, mental health, number of diagnoses, ergonomic exposures, occupational noise, exposure to risks, social support from supervisor, job control and quantitative demands. High age, poor health and ergonomic exposures were associated with low workability and mediated by workability to sickness absence for both genders. Low social class and low quantitative demands were associated with low workability and mediated to sickness absence among men. The mediated part was from 11 to 63 % of the total effect for the significant predictors. Workability mediated health, age, social class and ergonomic exposures in the prediction of sickness absence. The health predictors had the highest association with both workability and sickness absence; physical work environment was higher associated with the outcomes than psychosocial work environment. However, the explanatory value of the predictors for the variance in the model was low.

  5. Reliability and validity of a novel Kinect-based software program for measuring posture, balance and side-bending.

    Science.gov (United States)

    Grooten, Wilhelmus Johannes Andreas; Sandberg, Lisa; Ressman, John; Diamantoglou, Nicolas; Johansson, Elin; Rasmussen-Barr, Eva

    2018-01-08

    Clinical examinations are subjective and often show a low validity and reliability. Objective and highly reliable quantitative assessments are available in laboratory settings using 3D motion analysis, but these systems are too expensive to use for simple clinical examinations. Qinematic™ is an interactive movement analyses system based on the Kinect camera and is an easy-to-use clinical measurement system for assessing posture, balance and side-bending. The aim of the study was to test the test-retest the reliability and construct validity of Qinematic™ in a healthy population, and to calculate the minimal clinical differences for the variables of interest. A further aim was to identify the discriminative validity of Qinematic™ in people with low-back pain (LBP). We performed a test-retest reliability study (n = 37) with around 1 week between the occasions, a construct validity study (n = 30) in which Qinematic™ was tested against a 3D motion capture system, and a discriminative validity study, in which a group of people with LBP (n = 20) was compared to healthy controls (n = 17). We tested a large range of psychometric properties of 18 variables in three sections: posture (head and pelvic position, weight distribution), balance (sway area and velocity in single- and double-leg stance), and side-bending. The majority of the variables in the posture and balance sections, showed poor/fair reliability (ICC validity (Spearman reliability (ICC =0.898), excellent validity (r = 0.943), and Qinematic™ could differentiate between LPB and healthy individuals (p = 0.012). This paper shows that a novel software program (Qinematic™) based on the Kinect camera for measuring balance, posture and side-bending has poor psychometric properties, indicating that the variables on balance and posture should not be used for monitoring individual changes over time or in research. Future research on the dynamic tasks of Qinematic™ is warranted.

  6. Measuring the bright side of being blue: a new tool for assessing analytical rumination in depression.

    Directory of Open Access Journals (Sweden)

    Skye P Barbic

    Full Text Available BACKGROUND: Diagnosis and management of depression occurs frequently in the primary care setting. Current diagnostic and management of treatment practices across clinical populations focus on eliminating signs and symptoms of depression. However, there is debate that some interventions may pathologize normal, adaptive responses to stressors. Analytical rumination (AR is an example of an adaptive response of depression that is characterized by enhanced cognitive function to help an individual focus on, analyze, and solve problems. To date, research on AR has been hampered by the lack of theoretically-derived and psychometrically sound instruments. This study developed and tested a clinically meaningful measure of AR. METHODS: Using expert panels and an extensive literature review, we developed a conceptual framework for AR and 22 candidate items. Items were field tested to 579 young adults; 140 of whom completed the items at a second time point. We used Rasch measurement methods to construct and test the item set; and traditional psychometric analyses to compare items to existing rating scales. RESULTS: Data were high quality (0.81; evidence for divergent validity. Evidence of misfit for 2 items suggested that a 20-item scale with 4-point response categories best captured the concept of AR, fitting the Rasch model (χ2 = 95.26; df = 76, p = 0.07, with high reliability (rp = 0.86, ordered response scale structure, and no item bias (gender, age, time. CONCLUSION: Our study provides evidence for a 20-item Analytical Rumination Questionnaire (ARQ that can be used to quantify AR in adults who experience symptoms of depression. The ARQ is psychometrically robust and a clinically useful tool for the assessment and improvement of depression in the primary care setting. Future work is needed to establish the validity of this measure in people with major depression.

  7. Comparative evaluation of preventive measures against primary side stress corrosion cracking of mill annealed Inconel 600 steam generator tubes

    International Nuclear Information System (INIS)

    Frederick, G.; Hernalsteen, P.

    1986-01-01

    Significant amounts of primary side cracking have been reported in the mechanically expanded area of the tubes of PWR steam generators in Europe, in Japan and to a lesser extent in the USA. The Belgian utilities are faced with the same problem. At Doel 2, where the tubes are rolled for only a part of the tubesheet, primary side cracking appeared in the roll transition. The Doel 3 and Tihange 2 steam generators, whose tubes are expanded for the full depth of the tube sheet, have experienced cracking after about 10 000 h of operation not only in the roll transition but also at roll overlaps. While some leaks and eddy current indications are associated with tubesheet or rolling anomalies, many of them are found on normal tubes. A programme was launched by the Belgian utilities and was further co-sponsored by the Electric Power Research Institute (EPRI) to develop preventive actions applicable not only to hot steam generators but also to cold steam generators already installed on site. These preventive measures include stress relaxation and metallurgical improvement of the material by an in situ heat treatment of the whole tube sheet (a steam generator model was used to evaluate the feasibility of this treatment), and the introduction of residual compressive stresses on ID by rotopeening or shotpeening without inducing unacceptable tensile stresses on OD. A comparative evaluation of these measures was established on the basis of tests performed on representative mock-ups and specimens. (author)

  8. Right-sided cardiac function in healthy volunteers measured by first-pass radionuclide ventriculography and gated blood-pool SPECT: comparison with cine MRI

    DEFF Research Database (Denmark)

    Kjaer, Andreas; Lebech, Anne-Mette; Hesse, Birger

    2005-01-01

    for evaluation of right-sided cardiac function. The aim of our study was to compare the agreement between these methods when measuring right-sided cardiac function. METHODS: Twenty-four healthy volunteers were included. Mean age was 44 years (range: 25-60) and 29% were females. All participants had FP, GBPS...

  9. The dark side of galaxy colour: evidence from new SDSS measurements of galaxy clustering and lensing

    Energy Technology Data Exchange (ETDEWEB)

    Hearin, Andrew P. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States). Fermilab Center for Particle Astrophysics; Watson, Douglas F. [Univ. of Chicago, IL (United States). Kavli Inst. for Cosmological Physics (KICP); Becker, Matthew R. [Univ. of Chicago, IL (United States). Kavli Inst. for Cosmological Physics (KICP); KICP, Stanford, CA (United States); SLAC National Accelerator Lab., Menlo Park, CA (United States); Reyes, Reinabelle [Univ. of Chicago, IL (United States). Kavli Inst. for Cosmological Physics (KICP); Berlind, Andreas A. [Vanderbilt Univ., Nashville, TN (United States). Dept. of Physics and Astronomy; Zentner, Andrew R. [Pittsburgh Particle Physics, Astrophysics, and Cosmology Center (PITT PACC), PA (United States)

    2014-08-12

    The age matching model has recently been shown to predict correctly the luminosity L and g-r color of galaxies residing within dark matter halos. The central tenet of the model is intuitive: older halos tend to host galaxies with older stellar populations. In this paper, we demonstrate that age matching also correctly predicts the g-r color trends exhibited in a wide variety of statistics of the galaxy distribution for stellar mass M* threshold samples. In particular, we present new measurements of the galaxy two-point correlation function and the galaxy-galaxy lensing signal as a function of M* and g-r color from the Sloan Digital Sky Survey, and show that age matching exhibits remarkable agreement with these and other statistics of low-redshift galaxies. In so doing, we also demonstrate good agreement between the galaxy-galaxy lensing observed by SDSS and the signal predicted by abundance matching, a new success of this model. We describe how age matching is a specific example of a larger class of Conditional Abundance Matching models (CAM), a theoretical framework we introduce here for the first time. CAM provides a general formalism to study correlations at fixed mass between any galaxy property and any halo property. The striking success of our simple implementation of CAM provides compelling evidence that this technique has the potential to describe the same set of data as alternative models, but with a dramatic reduction in the required number of parameters. CAM achieves this reduction by exploiting the capability of contemporary N-body simulations to determine dark matter halo properties other than mass alone, which distinguishes our model from conventional approaches to the galaxy-halo connection.

  10. The dark side of galaxy colour: evidence from new SDSS measurements of galaxy clustering and lensing

    Science.gov (United States)

    Hearin, Andrew P.; Watson, Douglas F.; Becker, Matthew R.; Reyes, Reinabelle; Berlind, Andreas A.; Zentner, Andrew R.

    2014-10-01

    The age-matching model has recently been shown to predict correctly the luminosity L and g - r colour of galaxies residing within dark matter haloes. The central tenet of the model is intuitive: older haloes tend to host galaxies with older stellar populations. In this paper, we demonstrate that age matching also correctly predicts the g - r colour trends exhibited in a wide variety of statistics of the galaxy distribution for stellar mass M* threshold samples. In particular, we present new Sloan Digital Sky Survey (SDSS) measurements of galaxy clustering and the galaxy-galaxy lensing signal ΔΣ as a function of M* and g - r colour, and show that age matching exhibits remarkable agreement with these and other statistics of low-redshift galaxies. In so doing, we also demonstrate good agreement between the galaxy-galaxy lensing observed by SDSS and the ΔΣ signal predicted by abundance matching, a new success of this model. We describe how age matching is a specific example of a larger class of conditional abundance matching models (CAM), a theoretical framework we introduce here for the first time. CAM provides a general formalism to study correlations at fixed mass between any galaxy property and any halo property. The striking success of our simple implementation of CAM suggests that this technique has the potential to describe the same set of data as alternative models, but with a dramatic reduction in the required number of parameters. CAM achieves this reduction by exploiting the capability of contemporary N-body simulations to determine dark matter halo properties other than mass alone, which distinguishes our model from conventional approaches to the galaxy-halo connection.

  11. Optimisation of a Swedish district heating system with reduced heat demand due to energy efficiency measures in residential buildings

    International Nuclear Information System (INIS)

    Åberg, M.; Henning, D.

    2011-01-01

    The development towards more energy efficient buildings, as well as the expansion of district heating (DH) networks, is generally considered to reduce environmental impact. But the combined effect of these two progressions is more controversial. A reduced heat demand (HD) due to higher energy efficiency in buildings might hamper co-production of electricity and DH. In Sweden, co-produced electricity is normally considered to displace electricity from less efficient European condensing power plants. In this study, a potential HD reduction due to energy efficiency measures in the existing building stock in the Swedish city Linköping is calculated. The impact of HD reduction on heat and electricity production in the Linköping DH system is investigated by using the energy system optimisation model MODEST. Energy efficiency measures in buildings reduce seasonal HD variations. Model results show that HD reductions primarily decrease heat-only production. The electricity-to-heat output ratio for the system is increased for HD reductions up to 30%. Local and global CO 2 emissions are reduced. If co-produced electricity replaces electricity from coal-fired condensing power plants, a 20% HD reduction is optimal for decreasing global CO 2 emissions in the analysed DH system. - Highlights: ► A MODEST optimisation model of the Linköping district heating system is used. ► The impact of heat demand reduction on heat and electricity production is examined. ► Model results show that heat demand reductions decrease heat-only production. ► Local and global CO 2 emissions are reduced. ► The system electricity-to-heat output increases for reduced heat demand up to 30%.

  12. Measuring diffusion-relaxation correlation maps using non-uniform field gradients of single-sided NMR devices.

    Science.gov (United States)

    Nogueira d'Eurydice, Marcel; Galvosas, Petrik

    2014-11-01

    Single-sided NMR systems are becoming a relevant tool in industry and laboratory environments due to their low cost, low maintenance and capacity to evaluate quantity and quality of hydrogen based materials. The performance of such devices has improved significantly over the last decade, providing increased field homogeneity, field strength and even controlled static field gradients. For a class of these devices, the configuration of the permanent magnets provides a linear variation of the magnetic field and can be used in diffusion measurements. However, magnet design depends directly on its application and, according to the purpose, the field homogeneity may significantly be compromised. This may prevent the determination of diffusion properties of fluids based on the natural inhomogeneity of the field using known techniques. This work introduces a new approach that extends the applicability of diffusion-editing CPMG experiments to NMR devices with highly inhomogeneous magnetic fields, which do not vary linearly in space. Herein, we propose a method to determine a custom diffusion kernel based on the gradient distribution, which can be seen as a signature of each NMR device. This new diffusion kernel is then utilised in the 2D inverse Laplace transform (2D ILT) in order to determine diffusion-relaxation correlation maps of homogeneous multi-phasic fluids. The experiments were performed using NMR MObile Lateral Explore (MOLE), which is a single-sided NMR device designed to maximise the volume at the sweet spot with enhanced depth penetration. Copyright © 2014 Elsevier Inc. All rights reserved.

  13. Aggregated Demand Modelling Including Distributed Generation, Storage and Demand Response

    OpenAIRE

    Marzooghi, Hesamoddin; Hill, David J.; Verbic, Gregor

    2014-01-01

    It is anticipated that penetration of renewable energy sources (RESs) in power systems will increase further in the next decades mainly due to environmental issues. In the long term of several decades, which we refer to in terms of the future grid (FG), balancing between supply and demand will become dependent on demand actions including demand response (DR) and energy storage. So far, FG feasibility studies have not considered these new demand-side developments for modelling future demand. I...

  14. Exploring the Factor Structure of the Job Demands-Resources Measure With Patient Violence on Direct Care Workers in the Home Setting.

    Science.gov (United States)

    Byon, Ha Do; Harrington, Donna; Storr, Carla L; Lipscomb, Jane

    2017-08-01

    Workplace violence research in health care settings using the Job Demands-Resources (JD-R) framework is hindered by the lack of comprehensive examination of the factor structure of the JD-R measure when it includes patient violence. Is patient violence a component of job demands or its own factor as an occupational outcome? Exploratory factor analysis and confirmatory factor analysis were conducted using a sample of direct care workers in the home setting (n = 961). The overall 2-construct JD-R structure persisted. Patient violence was not identified as a separate factor from job demands; rather, two demand factors emerged: violence/emotional and workload/physical demands. Although the three-factor model fits the data, the two-factor model with patient violence being a component of job demands is a parsimonious and effective measurement framework.

  15. IGA/SCC propagation rate measurements on alloy 600 steam generator tubing using a side stream model boiler

    International Nuclear Information System (INIS)

    Takamatsu, H.; Matsueda, K.; Matsunaga, T.; Kitera, T.; Arioka, K.; Tsuruta, T.; Okamoto, S.

    1993-01-01

    IGA/SCC crack propagation rate measurements using various types of IGA/SCC predefected ALloy 600 tubing were tested in model boilers, a side stream model boiler at Ohi Unit 1 and similar model boilers in the laboratory. Types of IGA/SCC predefects introduced from the outside of the tubing were as follows. (1) Actual IGA/SCC predefect introduced by high temperature caustic environments; (2) Longitudinal predefect by electrodischarge machining (EDM) method, and then crack tip fatigue was introduced to serve as the marker on the fractured surface (EDM slit + fatigue). IGA/SCC crack propagation rate was measured after the destructive examination by Cr concentration profile on fracture surface for (1), and observation of intergranular fractured surface propagated from the marked fatigue was employed for (2) and (3) after the model boiler tests. As for the water chemistry conditions, mainly AVT (high N 2 H 4 ) + boric acid (5-10ppm as B in SGs) treatment for both model boilers, and some of the tests for the model boiler in the laboratory employed AVT (high N 2 H 4 ) without boric acid. The results of IGA/SCC crack propagation rate measurements were compared with each other, and the three methods employed showed a good coincidence with the rate of ca. 1 x 10 -5 mm/Hr for AVT (high N 2 H 4 ) + boric acid treatment condition, in the case that crack tip boron intensity (B/O value by IMMA analysis) of more than 1 was observed

  16. [Health as utopia. Grounds and causes of lack of demand for early diagnostic measures (author's transl)].

    Science.gov (United States)

    Buser, K; Oeter, K

    1981-11-27

    The quite obvious neglect of prophylactic measures cannot be attributed to a single cause only. Ground are rather to be found both in the psychic disposition and in the social stratum of the population as well as in the nature of the prophylaxis available. A synopsis leads to the conclusion that effective prevention requires not only changing the attitude of the patient or the population but also that of the supplier of the health promoting services.

  17. Measuring the consumer welfare effects of carbon penalties: theory and applications to household energy demand

    International Nuclear Information System (INIS)

    Dumagan, J.C.; Mount, T.D.

    1992-01-01

    Increased attention is being devoted to the analysis of environmental externalities generated by economic activities. For example, the emissions of sulphur dioxide, nitrogen oxides and carbon from the generation of electricity are central issues in the discussion of externalities in the New York State bidding process. Furthermore, there is increasing interest nationally and internationally in policy proposals to reduce carbon emissions. The taxation of carbon emissions is one way for society to internalize environmental externalities relative to global warming by imposing monetary penalties per unit of carbon emitted from all fuels. This contrasts with the bidding process because the latter adds cost to electricity generation only. However, in both cases electric utilities are in a position to pass on these charges to their customers through increased rates. Consequently, there are inevitable effects on the welfare of consumers, and the monetary measurement of these welfare effects is the primary focus of this paper. (author)

  18. Assess the feasibility of the high-speed railway construction in China by measuring the traffic demand elastic

    Science.gov (United States)

    Yu, Nan; Cao, Yu

    2017-05-01

    The traffic demand elastic is proposed as a new indicator in this study to measure the feasibility of the high-speed railway construction in a more intuitive way. The Matrix Completion (MC) and Semi-Supervised Support Vector Machine (S3VM) are used to realize the measurement and prediction of this index on the basis of the satisfaction investigation on the 326 inter-city railways in china. It is demonstrated that instead of calculating the economic benefits brought by the construction of high-speed railway, this indicator can find the most urgent railways to be improved by directly evaluate the existing railway facilities from the perspective of transportation service improvement requirements.

  19. Effects of Operating Parameters on Measurements of Biochemical Oxygen Demand Using a Mediatorless Microbial Fuel Cell Biosensor

    Directory of Open Access Journals (Sweden)

    Min-Chi Hsieh

    2015-12-01

    Full Text Available The conventional Biochemical Oxygen Demand (BOD method takes five days to analyze samples. A microbial fuel cell (MFC may be an alternate tool for rapid BOD determination in water. However, a MFC biosensor for continuous BOD measurements of water samples is still unavailable. In this study, a MFC biosensor inoculated with known mixed cultures was used to determine the BOD concentration. Effects of important parameters on establishing a calibration curve between the BOD concentration and output signal from the MFC were evaluated. The results indicate monosaccharides were good fuel, and methionine, phenylalanine, and ethanol were poor fuels for electricity generation by the MFC. Ions in the influent did not significantly affect the MFC performance. CN− in the influent could alleviate the effect of antagonistic electron acceptors on the MFC performance. The regression equation for BOD concentration and current density of the biosensor was y = 0.0145x + 0.3317. It was adopted to measure accurately and continuously the BOD concentration in actual water samples at an acceptable error margin. These results clearly show the developed MFC biosensor has great potential as an alternative BOD sensing device for online measurements of wastewater BOD.

  20. Inkjet metrology: high-accuracy mass measurements of microdroplets produced by a drop-on-demand dispenser.

    Science.gov (United States)

    Verkouteren, R Michael; Verkouteren, Jennifer R

    2009-10-15

    We describe gravimetric methods for measuring the mass of droplets generated by a drop-on-demand (DOD) microdispenser. Droplets are deposited, either continuously at a known frequency or as a burst of known number, into a cylinder positioned on a submicrogram balance. Mass measurements are acquired precisely by computer, and results are corrected for evaporation. Capabilities are demonstrated using isobutyl alcohol droplets. For ejection rates greater than 100 Hz, the repeatability of droplet mass measurements was 0.2%, while the combined relative standard uncertainty (u(c)) was 0.9%. When bursts of droplets were dispensed, the limit of quantitation was 72 microg (1490 droplets) with u(c) = 1.0%. Individual droplet size in a burst was evaluated by high-speed videography. Diameters were consistent from the tenth droplet onward, and the mass of an individual droplet was best estimated by the average droplet mass with a combined uncertainty of about 1%. Diameters of the first several droplets were anomalous, but their contribution was accounted for when dispensing bursts. Above the limits of quantitation, the gravimetric methods provided statistically equivalent results and permit detailed study of operational factors that influence droplet mass during dispensing, including the development of reliable microassays and standard materials using DOD technologies.

  1. Evaluating the comparative effectiveness of different demand side interventions to increase maternal health service utilization and practice of birth spacing in South Kivu, Democratic Republic of Congo: an innovative, mixed methods approach.

    Science.gov (United States)

    Dumbaugh, Mari; Bapolisi, Wyvine; van de Weerd, Jennie; Zabiti, Michel; Mommers, Paula; Balaluka, Ghislain Bisimwa; Merten, Sonja

    2017-07-03

    In this protocol we describe a mixed methods study in the province of South Kivu, Democratic Republic of Congo evaluating the effectiveness of different demand side strategies to increase maternal health service utilization and the practice of birth spacing. Conditional service subsidization, conditional cash transfers and non-monetary incentives aim to encourage women to use maternal health services and practice birth spacing in two different health districts. Our methodology will comparatively evaluate the effectiveness of different approaches against each other and no intervention. This study comprises four main research activities: 1) Formative qualitative research to determine feasibility of planned activities and inform development of the quantitative survey; 2) A community-based, longitudinal survey; 3) A retrospective review of health facility records; 4) Qualitative exploration of intervention acceptability and emergent themes through in-depth interviews with program participants, non-participants, their partners and health providers. Female community health workers are engaged as core members of the research team, working in tandem with female survey teams to identify women in the community who meet eligibility criteria. Female community health workers also act as key informants and community entry points during methods design and qualitative exploration. Main study outcomes are completion of antenatal care, institutional delivery, practice of birth spacing, family planning uptake and intervention acceptability in the communities. Qualitative methods also explore decision making around maternal health service use, fertility preference and perceptions of family planning. The innovative mixed methods design allows quantitative data to inform the relationships and phenomena to be explored in qualitative collection. In turn, qualitative findings will be triangulated with quantitative findings. Inspired by the principles of grounded theory, qualitative

  2. Demand response in energy markets

    International Nuclear Information System (INIS)

    Skytte, K.; Birk Mortensen, J.

    2004-11-01

    Improving the ability of energy demand to respond to wholesale prices during critical periods of the spot market can reduce the total costs of reliably meeting demand, and the level and volatility of the prices. This fact has lead to a growing interest in the short-run demand response. There has especially been a growing interest in the electricity market where peak-load periods with high spot prices and occasional local blackouts have recently been seen. Market concentration at the supply side can result in even higher peak-load prices. Demand response by shifting demand from peak to base-load periods can counteract the market power in the peak-load. However, demand response has so far been modest since the current short-term price elasticity seems to be small. This is also the case for related markets, for example, green certificates where the demand is determined as a percentage of the power demand, or for heat and natural gas markets. This raises a number of interesting research issues: 1) Demand response in different energy markets, 2) Estimation of price elasticity and flexibility, 3) Stimulation of demand response, 4) Regulation, policy and modelling aspects, 5) Demand response and market power at the supply side, 6) Energy security of supply, 7) Demand response in forward, spot, ancillary service, balance and capacity markets, 8) Demand response in deviated markets, e.g., emission, futures, and green certificate markets, 9) Value of increased demand response, 10) Flexible households. (BA)

  3. Response of bean (Vicia faba L.) plants to low sink demand by measuring the gas exchange rates and chlorophyll a fluorescence kinetics.

    Science.gov (United States)

    Yan, Bo-Fang; Duan, Wei; Liu, Guo-Tian; Xu, Hong-Guo; Wang, Li-Jun; Li, Shao-Hua

    2013-01-01

    The decline of photosynthesis in plants under low sink demand is well known. Previous studies focused on the relationship between stomatal conductance (gs) and net photosynthetic rate (Pn). These studies investigated the effect of changes in Photosystem II (PSII) function on the Pn decline under low sink demand. However, little is known about its effects on different limiting steps of electron transport chain in PSII under this condition. Two-month-old bean plants were processed by removing pods and flowers (low sink demand). On the 1(st) day after low sink demand treatment, a decline of Pn was accompanied by a decrease in gs and internal-to-ambient CO2 concentration ratio (Ci/Ca). From the 3(rd) to 9(th) day, Pn and gs declined continuously while Ci/Ca ratio remained stable in the treatment. Moreover, these values were lower than that of control. Wk (a parameter reflecting the damage to oxygen evolving complex of the donor side of PSII) values in the treatment were significantly higher than their corresponding control values. However, RCQA (a parameter reflecting the number of active RCs per excited cross-section of PSII) values in the treatment were significantly lower than control from the 5(th) day. From the 11(th) to 21(st) day, Pn and gs of the treatment continued to decline and were lower than control. This was accompanied by a decrease of RCQA, and an increase of Wk. Furthermore, the quantum yield parameters φPo, φEo and ψEo in the treatment were lower than in control; however, Ci/Ca values in the treatment gradually increased and were significantly higher than control on the 21(st) day. Stomatal limitation during the early stage, whereas a combination of stomatal and non-stomatal limitation during the middle stage might be responsible for the reduction of Pn under low sink demand. Non-stomatal limitation during the late stages after the removal of the sink of roots and pods may also cause Pn reduction. The non-stomatal limitation was associated with the

  4. Single-sided NMR

    CERN Document Server

    Casanova, Federico; Blümich, Bernhard

    2011-01-01

    Single-Sided NMR describes the design of the first functioning single-sided tomograph, the related measurement methods, and a number of applications. One of the key advantages to this method is the speed at which the images are obtained.

  5. Demand Uncertainty

    DEFF Research Database (Denmark)

    Nguyen, Daniel Xuyen

    This paper presents a model of trade that explains why firms wait to export and why many exporters fail. Firms face uncertain demands that are only realized after the firm enters the destination. The model retools the timing of uncertainty resolution found in productivity heterogeneity models....... This retooling addresses several shortcomings. First, the imperfect correlation of demands reconciles the sales variation observed in and across destinations. Second, since demands for the firm's output are correlated across destinations, a firm can use previously realized demands to forecast unknown demands...... in untested destinations. The option to forecast demands causes firms to delay exporting in order to gather more information about foreign demand. Third, since uncertainty is resolved after entry, many firms enter a destination and then exit after learning that they cannot profit. This prediction reconciles...

  6. Upward pricing pressure in two-sided markets

    NARCIS (Netherlands)

    Affeldt, P.; Filistrucchi, L.; Klein, T.J.

    2013-01-01

    Measuring upward pricing pressure (UPP) has recently been proposed by Farrell and Shapiro (2010) as an alternative screening device for horizontal mergers. We extend the concept of UPP to two-sided markets. Examples of such markets are the newspaper market, where the demand for advertising is

  7. Chapter 10: Peak Demand and Time-Differentiated Energy Savings Cross-Cutting Protocol. The Uniform Methods Project: Methods for Determining Energy Efficiency Savings for Specific Measures

    Energy Technology Data Exchange (ETDEWEB)

    Kurnik, Charles W [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Stern, Frank [Navigant, Boulder, CO (United States); Spencer, Justin [Navigant, Boulder, CO (United States)

    2017-10-03

    Savings from electric energy efficiency measures and programs are often expressed in terms of annual energy and presented as kilowatt-hours per year (kWh/year). However, for a full assessment of the value of these savings, it is usually necessary to consider the measure or program's impact on peak demand as well as time-differentiated energy savings. This cross-cutting protocol describes methods for estimating the peak demand and time-differentiated energy impacts of measures implemented through energy efficiency programs.

  8. Comparison of two self-reported measures of physical work demands in hospital personnel: a cross-sectional study

    DEFF Research Database (Denmark)

    Nabe-Nielsen, Kirsten; Fallentin, Nils; Christensen, Karl B

    2008-01-01

    daily number of patient handling tasks and Hollmann's physical load index). METHODS: A questionnaire was distributed to 535 hospital employees in a psychiatric and an orthopedic ward in a Danish hospital. Of these 411 (77%) filled in and returned the questionnaire. Only the 373 respondents who had non...... the prevalence odds ratio (POR) for LBP was 5.38 (95% CI 2.03-14.29) in the group performing more than 10 patient handling tasks per day and 2.29 (95% CI 0.93-5.66) in the group with the highest score on the physical load index. CONCLUSION: In specialized hospital wards the daily number of patient handling tasks......BACKGROUND: Low back pain (LBP) is a frequent health complaint among health care personnel. Several work tasks and working postures are associated with an increased risk of LBP. The aim of this study was to compare two self-reported measures of physical demands and their association with LBP (the...

  9. Advances in LWD pressure measurements: smart, time optimized pretests and on demand real-time transmission applications

    Energy Technology Data Exchange (ETDEWEB)

    Serafim, Robson; Ferraris, Paolo [Schlumberger, Rio de Janeiro, RJ (Brazil)

    2008-07-01

    The StethoScope Logging While Drilling (LWD) Pressure Measurement, introduced in Brazil in 2005, has been extensively used in deep water environment to provide reservoir pressure and mobility in real-time. In the last three years the StethoScope service was further enhanced to allow better real time monitoring using a larger transmission rate, higher RT data resolution and remote visualization. In order to guarantee stable formation pressures with a limited test duration under a wide range of conditions, Time Optimized Pretests (TOP) were developed. These tests adjust automatically drawdown and buildup parameters as a function of formation characteristics (pressure/mobility) without requiring any input from the operator. On-demand frame (ODF), an advanced telemetry triggered automatically during the pressure tests, allowed to increase equivalent transmission rate and resolution and to include quality indices computed downhole. This paper is focused on the TOP and ODF Field Test results in Brazil, which proved to be useful and reliable options for better real-time decisions together with remote monitoring visualization implemented by the RTMonitor program. (author)

  10. Fabrication and measurement of a 10x scale model of a double-sided planar mm-wave linac cavity structure

    International Nuclear Information System (INIS)

    Kang, Y.W.; Matthews, P.; Nassiri, A.; Kustom, R.L.

    1994-01-01

    A double-sided planar mm-wave linear accelerating cavity, structure has been investigated. An 80-cell constant impedance structure working with 2π/3-mode traveling wave was chosen as an accelerator section. A 10x scale model of the structure has been fabricated and the basic electrical performances have been tested. The nodal shift measurement technique with a rectangular detuning plunger was used to measure the phase advance between the cells with a vector network analyzer

  11. Assessing the ability of potential evapotranspiration models in capturing dynamics of evaporative demand across various biomes and climatic regimes with ChinaFLUX measurements

    Science.gov (United States)

    Zheng, Han; Yu, Guirui; Wang, Qiufeng; Zhu, Xianjin; Yan, Junhua; Wang, Huimin; Shi, Peili; Zhao, Fenghua; Li, Yingnian; Zhao, Liang; Zhang, Junhui; Wang, Yanfen

    2017-08-01

    Estimates of atmospheric evaporative demand have been widely required for a variety of hydrological analyses, with potential evapotranspiration (PET) being an important measure representing evaporative demand of actual vegetated surfaces under given metrological conditions. In this study, we assessed the ability of various PET models in capturing long-term (typically 2003-2011) dynamics of evaporative demand at eight ecosystems across various biomes and climatic regimes in China. Prior to assessing PET dynamics, we first examined the reasonability of fourteen PET models in representing the magnitudes of evaporative demand using eddy-covariance actual evapotranspiration (AET) as an indicator. Results showed that the robustness of the fourteen PET models differed somewhat across the sites, and only three PET models could produce reasonable magnitudes of evaporative demand (i.e., PET ≥ AET on average) for all eight sites, including the: (i) Penman; (ii) Priestly-Taylor and (iii) Linacre models. Then, we assessed the ability of these three PET models in capturing dynamics of evaporative demand by comparing the annual and seasonal trends in PET against the equivalent trends in AET and precipitation (P) for particular sites. Results indicated that nearly all the three PET models could faithfully reproduce the dynamics in evaporative demand for the energy-limited conditions at both annual and seasonal scales, while only the Penman and Linacre models could represent dynamics in evaporative demand for the water-limited conditions. However, the Linacre model was unable to reproduce the seasonal switches between water- and energy-limited states for some sites. Our findings demonstrated that the choice of PET models would be essential for the evaporative demand analyses and other related hydrological analyses at different temporal and spatial scales.

  12. Whole field strain measurement in critical thin adhesive layer of single- and double-sided repaired CFRP panel using DIC

    Science.gov (United States)

    Kashfuddoja, Mohammad; Ramji, M.

    2015-03-01

    In the present work, the behavior of thin adhesively layer in patch repaired carbon fiber reinforced polymer (CFRP) panel under tensile load is investigated experimentally using digital image correlation (DIC) technique. The panel is made of Carbon/epoxy composite laminate and the stacking sequence in the panel is [0º]4. A circular hole of 10 mm diameter (d) is drilled at the center of the panel to mimic the case of low velocity impact damage removal. The panel with open hole is repaired with double sided (symmetrical) and single sided (unsymmetrical) rectangular patch made of same panel material having stacking sequence of [0º]3. Araldite 2011 is used for bonding the patch onto the panel over the damaged area. The global behavior of thin adhesive layer is examined by analyzing whole field strain distribution using DIC. Longitudinal, peel and shear strain field in both double and single sided repair configuration is studied and a compression is made between them. An estimate of shear transfer length which is an essential parameter in arriving at an appropriate overlap length in patch design is proposed from DIC and FEA. Damage development, failure mechanism and load displacement behavior is also investigated. The experimental results are compared with the numerical predictions.

  13. A DANREF certified reference plastic for measurement of overall migration into the food simulant olive oil by single sided testing

    DEFF Research Database (Denmark)

    Lund, K. H.; Lillemark, L.; Petersen, Jens Højslev

    2000-01-01

    A reference material for the determination of overall migration from a plastic coextrudate into the fatty food simulant olive oil was produced and certified in an interlaboratory study. The analyses were carried out according to the ENV 1186 standard from the European Committee for Standardization...... (CEN) [1, 2, 3] with exposure of the coextrudate to olive oil for 10 days at 40 degrees C. After an initial preliminary interlaboratory study eight laboratories participated in the certification round, and two different methods were used to obtain single sided exposure of the plastic to the oil...

  14. What U.S. data should be used to measure the price elasticity of demand for alcohol?

    Science.gov (United States)

    Ruhm, Christopher J; Jones, Alison Snow; McGeary, Kerry Anne; Kerr, William C; Terza, Joseph V; Greenfield, Thomas K; Pandian, Ravi S

    2012-12-01

    This paper examines how estimates of the price elasticity of demand for beer vary with the choice of alcohol price series examined. Our most important finding is that the commonly used ACCRA price data are unlikely to reliably indicate alcohol demand elasticities-estimates obtained from this source vary drastically and unpredictably. As an alternative, researchers often use beer taxes to proxy for alcohol prices. While the estimated beer taxes elasticities are more stable, there are several problems with using taxes, including difficulties in accounting for cross-price effects. We believe that the most useful estimates reported in this paper are obtained using annual Uniform Product Code (UPC) "barcode" scanner data on grocery store alcohol prices. These estimates suggest relatively low demand elasticity, probably around -0.3, with evidence that the elasticities are considerably overstated in models that control for beer but not wine or spirits prices. Copyright © 2012 Elsevier B.V. All rights reserved.

  15. What U.S. Data Should be Used to Measure the Price Elasticity of Demand for Alcohol?*

    Science.gov (United States)

    Ruhm, Christopher J.; Jones, Alison Snow; McGeary, Kerry Anne; Kerr, William C.; Terza, Joseph V.; Greenfield, Thomas K.; Pandian, Ravi S.

    2012-01-01

    This paper examines how estimates of the price elasticity of demand for beer vary with the choice of alcohol price series examined. Our most important finding is that the commonly used ACCRA price data are unlikely to reliably indicate alcohol demand elasticities—estimates obtained from this source vary drastically and unpredictably. As an alternative, researchers often use beer taxes to proxy for alcohol prices. While the estimated beer taxes elasticities are more stable, there are several problems with using taxes, including difficulties in accounting for cross-price effects. We believe that the most useful estimates reported in this paper are obtained using annual Uniform Product Code (UPC) “barcode” scanner data on grocery store alcohol prices. These estimates suggest relatively low demand elasticity, probably around −0.3, with evidence that the elasticities are considerably overstated in models that control for beer but not wine or spirits prices. PMID:23022631

  16. Measuring cognitive task demands using dual task methodology, subjective self-ratings, and expert judgments : A Validation Study

    NARCIS (Netherlands)

    Révész, Andrea; Michel, Marije; Gilabert, Roger

    2016-01-01

    This study explored the usefulness of dual-task methodology, self-ratings, and expert judgements in assessing task-generated cognitive demands as a way to provide validity evidence for manipulations of task complexity. The participants were 96 students and 61 ESL teachers. The students, 48 English

  17. Test Results for Caustic Demand Measurements on Tank 241-AX-101 and Tank 241-AX-103 Archive Samples

    International Nuclear Information System (INIS)

    Doll, Stephanie R.; Bolling, Stacie D.

    2016-01-01

    Caustic demand testing is used to determine the necessary amount of caustic required to neutralize species present in the Hanford tank waste and obtain a target molarity of free hydroxide for tank corrosion control. The presence and quantity of hydroxide-consuming analytes are just as important in determining the caustic demand as is the amount of free hydroxide present. No single data point can accurately predict whether a satisfactory hydroxide level is being met, as it is dependent on multiple factors (e.g., free hydroxide, buffers, amphoteric metal hydroxides, bicarbonate, etc.). This enclosure contains the caustic demand, scanning electron microscopy (SEM), polarized light microscopy (PLM), and X-ray diffraction (XRD) analysis for the tank 241-AX-101 (AX-101) and 241-AX-103 (AX-103) samples. The work was completed to fulfill a customer request outlined in the test plan, WRPS-1505529, ''Test Plan and Procedure for Caustic Demand Testing on Tank 241-AX-101 and Tank 241-AX-103 Archive Samples.'' The work results will provide a baseline to support planned retrieval of AX-101 and AX-103.

  18. Modeling the Impacts of Changes in Freight Demand, Infrastructure Improvements and Policy Measures on a Metropolitan Region

    Science.gov (United States)

    2018-01-01

    In this research, a policy framework was developed and used as a tool to determine the impacts of change in truck traffic on a regional level as a result of policy change. To achieve the objective, three demand models were used in the framework which...

  19. Effectiveness of measures and implementation strategies in reducing physical work demands due to manual handling at work

    NARCIS (Netherlands)

    van der Molen, Henk F.; Sluiter, Judith K.; Hulshof, Carel T. J.; Vink, Peter; Frings-Dresen, Monique H. W.

    2005-01-01

    This review aimed at producing insight into the effectiveness of interventions to reduce the physical work demands associated with manual (materials) handling in the work situation and musculoskeletal symptoms in the longer term. A systematic electronic literature search between 1990 and February

  20. Test Results for Caustic Demand Measurements on Tank 241-AX-101 and Tank 241-AX-103 Archive Samples

    Energy Technology Data Exchange (ETDEWEB)

    Doll, Stephanie R. [Washington River Protection Solutions, Richland, WA (United States); Bolling, Stacie D. [Washington River Protection Solutions, Richland, WA (United States)

    2016-07-14

    Caustic demand testing is used to determine the necessary amount of caustic required to neutralize species present in the Hanford tank waste and obtain a target molarity of free hydroxide for tank corrosion control. The presence and quantity of hydroxide-consuming analytes are just as important in determining the caustic demand as is the amount of free hydroxide present. No single data point can accurately predict whether a satisfactory hydroxide level is being met, as it is dependent on multiple factors (e.g., free hydroxide, buffers, amphoteric metal hydroxides, bicarbonate, etc.). This enclosure contains the caustic demand, scanning electron microscopy (SEM), polarized light microscopy (PLM), and X-ray diffraction (XRD) analysis for the tank 241-AX-101 (AX-101) and 241-AX-103 (AX-103) samples. The work was completed to fulfill a customer request outlined in the test plan, WRPS-1505529, “Test Plan and Procedure for Caustic Demand Testing on Tank 241-AX-101 and Tank 241-AX-103 Archive Samples.” The work results will provide a baseline to support planned retrieval of AX-101 and AX-103.

  1. Measuring Cognitive Task Demands Using Dual-Task Methodology, Subjective Self-Ratings, and Expert Judgments: A Validation Study

    Science.gov (United States)

    Revesz, Andrea; Michel, Marije; Gilabert, Roger

    2016-01-01

    This study explored the usefulness of dual-task methodology, self-ratings, and expert judgments in assessing task-generated cognitive demands as a way to provide validity evidence for manipulations of task complexity. The participants were 96 students and 61 English as a second language (ESL) teachers. The students, 48 English native speakers and…

  2. Electricity demand in Kazakhstan

    International Nuclear Information System (INIS)

    Atakhanova, Zauresh; Howie, Peter

    2007-01-01

    Properties of electricity demand in transition economies have not been sufficiently well researched mostly due to data limitations. However, information on the properties of electricity demand is necessary for policy makers to evaluate effects of price changes on different consumers and obtain demand forecasts for capacity planning. This study estimates Kazakhstan's aggregate demand for electricity as well as electricity demand in the industrial, service, and residential sectors using regional data. Firstly, our results show that price elasticity of demand in all sectors is low. This fact suggests that there is considerable room for price increases necessary to finance generation and distribution system upgrading. Secondly, we find that income elasticity of demand in the aggregate and all sectoral models is less than unity. Of the three sectors, electricity demand in the residential sector has the lowest income elasticity. This result indicates that policy initiatives to secure affordability of electricity consumption to lower income residential consumers may be required. Finally, our forecast shows that electricity demand may grow at either 3% or 5% per year depending on rates of economic growth and government policy regarding price increases and promotion of efficiency. We find that planned supply increases would be sufficient to cover growing demand only if real electricity prices start to increase toward long-run cost-recovery levels and policy measures are implemented to maintain the current high growth of electricity efficiency

  3. French bio-diesel demand and promoting measures analysis by 2010; Analyse de la demande et des mesures de promotion francaises du biodiesel a l'horizon 2010

    Energy Technology Data Exchange (ETDEWEB)

    Bernard, F

    2008-02-15

    The researches presented aim at assessing bio-diesel promoting measures under consideration in France by 2010. This assessment is based on a deep study of French bio-diesel demand. The use of a linear model for optimizing the whole French refining industry costs allow us to take into account the physicochemical characteristics of bio-diesel useful for gas oil blending operation. This researches show that bio-diesel can be incorporated up to 27% blend in volume to diesel fuel without major technical problem. A decomposition of the value allotted to the bio-diesel by French refiners according to its physicochemical characteristics shows that energy content is the most disadvantageous characteristics for bio-diesel incorporation and, up to 17%, density become also constraining. However, the low bio-diesel sulphur content could become interesting from now to 2010. On the basis of this bio-diesel demand analysis, we proceed to an external coupling of an agro-industrial model of bio-diesel supply with the French refining model. Thus, we study the impact of the 2010 French bio-diesel consumption objective on agricultural surface need, the competitiveness of the bio-diesel, the reduction of greenhouse gases emissions and the trade balance of the petroleum products. On this basis, we propose a critical analysis of French bio-diesel promoting measures under consideration by 2010. (author)

  4. Developement of a same-side kaon tagging algorithm of B^0_s decays for measuring delta m_s at CDF II

    Energy Technology Data Exchange (ETDEWEB)

    Menzemer, Stephanie; /Heidelberg U.

    2006-06-01

    The authors developed a Same-Side Kaon Tagging algorithm to determine the production flavor of B{sub s}{sup 0} mesons. Until the B{sub s}{sup 0} mixing frequency is clearly observed the performance of the Same-Side Kaon Tagging algorithm can not be measured on data but has to be determined on Monte Carlo simulation. Data and Monte Carlo agreement has been evaluated for both the B{sub s}{sup 0} and the high statistics B{sup +} and B{sup 0} modes. Extensive systematic studies were performed to quantify potential discrepancies between data and Monte Carlo. The final optimized tagging algorithm exploits the particle identification capability of the CDF II detector. it achieves a tagging performance of {epsilon}D{sup 2} = 4.0{sub -1.2}{sup +0.9} on the B{sub s}{sup 0} {yields} D{sub s}{sup -} {pi}{sup +} sample. The Same-Side Kaon Tagging algorithm presented here has been applied to the ongoing B{sub s}{sup 0} mixing analysis, and has provided a factor of 3-4 increase in the effective statistical size of the sample. This improvement results in the first direct measurement of the B{sub s}{sup 0} mixing frequency.

  5. Study on the measures of tunnels side-crossing bridge based on sheltering effects of isolation piles

    Science.gov (United States)

    Tang, Jian; Liu, Jun yan; Liu, Yan

    2017-08-01

    Based on the transit line 3, we studied the effect of the bridge piles crossed closely from the side by the shield tunnel. Using the three-dimensional finite element numerical analysis software Midas GTS/NX, we analyzed the effect of shield tunnel on pile deformation, statistics are obtained that under the condition of pile, subgrade reinforcement and ground changes. The calculation results show that in the condition of reinforcement, the new tunnel shield crossing through the pile caused longitudinal disturbance of the tunnel surrounding strata along the tunnel, where the soil over the area is within a certain range of pile and settlement deformation of surface subsidence occurs, changing the surface roughly to the shape of “V”. The maximum value appears above the shield tunnel and the value is high. In combination with engineering geology, hydrogeology and environment factors, this paper adopted isolation pile reinforcement to the pile, and the simulated results show that, pile settlement was significantly reduced under the condition of pile reinforcement. The calculation results show the rationality of the reinforcement scheme to a certain extent, which provides a theoretical basis for the similar tunnel.

  6. Two sides of the same story : measuring different quality perceptions of the dyadic service encounter with the SERVCON instrument

    NARCIS (Netherlands)

    Ruyter, de J.C.; Wetzels, M.G.M.

    1996-01-01

    The measurement of perceived service quality using the well-known SERVQUAL instrument has been criticized by a number of authors recently. This criticism concerns the conceptual basis of this quality measurement tool as well as its empirical operationalization. In this paper, we present a

  7. Consumer Demands

    DEFF Research Database (Denmark)

    Holm-Nielsen, Jens Bo

    1996-01-01

    to farms that supply fresh manure to the digestion process, partly to crop farms in need of organic fertilizers. Environmental and agricultural benefits include savings for farmers as a consequence of improved fertilizer efficiency and thereby reduction  of needs of chemical fertilizers. A side effect...

  8. Supplies should match growing demand

    International Nuclear Information System (INIS)

    Rasmusen, H.J.

    1997-01-01

    The natural gas industry is currently enjoying healthy growth prospects. Not only is the demand for natural gas steadily growing; the outlook for increasing gas reserves is promising as well. The success of natural gas in the marketplace reflects, on one hand, continuous attention paid to public and customer requirements and, on the other hand, the ability of the gas industry to direct technological developments toward the increasing public demand for gas at competitive market prices supplied in a reliable, safe and environmentally friendly manner. In the past, the gas industry has been involved in the development of technologies for everything from gas production to the end user and from borehole to burner tip, and the author believes that the industry must continue or even increase its emphasis on technology in the future in order to capture new market opportunities. He explains this by looking at the supply side, the demand side and the structural side of the business

  9. Analysis on the Electric Power Supply - Demand Measures of Japan in 2011 Summer after Earthquake and Tsunami

    International Nuclear Information System (INIS)

    Lee, Y. E.; Chang, H. S.

    2011-01-01

    Only 12 of 54 nuclear reactors are in operation as of September 1, 2011 in the wake of the earthquake and tsunami in Japan. The share of nuclear power in the nation's installation capacity fell to about 14% in August from about 30% before March 11, 2011. Government or many of research institutes estimated that the power supply system in Japan would fall to the minus reserve margin, if the nuclear power stations could not be restarted as scheduled. However, the current situation of power supply system in Japan is less severe than expected before, because the power companies and public have engaged in various diligent efforts to boost supply capacity or reduce demand in response to the electric power crisis. This paper aims to analyze the how much Japan electric power supply system depends on the nuclear power, what kinds of countermeasures of electric power supply-demand are taken by electricity companies in summer time to avoid the blackouts and why the saving electricity in Japan could be possible unlike Korea. Insights from this paper would be taken into account in the long term energy planning, even though the further study in depth should be followed

  10. Factor structure and longitudinal measurement invariance of the demand control support model: an evidence from the Swedish Longitudinal Occupational Survey of Health (SLOSH).

    Science.gov (United States)

    Chungkham, Holendro Singh; Ingre, Michael; Karasek, Robert; Westerlund, Hugo; Theorell, Töres

    2013-01-01

    To examine the factor structure and to evaluate the longitudinal measurement invariance of the demand-control-support questionnaire (DCSQ), using the Swedish Longitudinal Occupational Survey of Health (SLOSH). A confirmatory factor analysis (CFA) and multi-group confirmatory factor analysis (MGCFA) models within the framework of structural equation modeling (SEM) have been used to examine the factor structure and invariance across time. Four factors: psychological demand, skill discretion, decision authority and social support, were confirmed by CFA at baseline, with the best fit obtained by removing the item repetitive work of skill discretion. A measurement error correlation (0.42) between work fast and work intensively for psychological demands was also detected. Acceptable composite reliability measures were obtained except for skill discretion (0.68). The invariance of the same factor structure was established, but caution in comparing mean levels of factors over time is warranted as lack of intercept invariance was evident. However, partial intercept invariance was established for work intensively. Our findings indicate that skill discretion and decision authority represent two distinct constructs in the retained model. However removing the item repetitive work along with either work fast or work intensively would improve model fit. Care should also be taken while making comparisons in the constructs across time. Further research should investigate invariance across occupations or socio-economic classes.

  11. Factor structure and longitudinal measurement invariance of the demand control support model: an evidence from the Swedish Longitudinal Occupational Survey of Health (SLOSH.

    Directory of Open Access Journals (Sweden)

    Holendro Singh Chungkham

    Full Text Available OBJECTIVES: To examine the factor structure and to evaluate the longitudinal measurement invariance of the demand-control-support questionnaire (DCSQ, using the Swedish Longitudinal Occupational Survey of Health (SLOSH. METHODS: A confirmatory factor analysis (CFA and multi-group confirmatory factor analysis (MGCFA models within the framework of structural equation modeling (SEM have been used to examine the factor structure and invariance across time. RESULTS: Four factors: psychological demand, skill discretion, decision authority and social support, were confirmed by CFA at baseline, with the best fit obtained by removing the item repetitive work of skill discretion. A measurement error correlation (0.42 between work fast and work intensively for psychological demands was also detected. Acceptable composite reliability measures were obtained except for skill discretion (0.68. The invariance of the same factor structure was established, but caution in comparing mean levels of factors over time is warranted as lack of intercept invariance was evident. However, partial intercept invariance was established for work intensively. CONCLUSION: Our findings indicate that skill discretion and decision authority represent two distinct constructs in the retained model. However removing the item repetitive work along with either work fast or work intensively would improve model fit. Care should also be taken while making comparisons in the constructs across time. Further research should investigate invariance across occupations or socio-economic classes.

  12. Work demands and health consequences of organizational and technological measures introduced to enhance the quality of home care services--A subgroup analysis.

    Science.gov (United States)

    Andersen, Gunn Robstad; Bendal, Synne; Westgaard, Rolf H

    2015-11-01

    This study of home care workers in a Norwegian municipality aimed to examine the effect of two measures involving organizational (job checklists) and technological (personal digital assistants) job aids on perceived work demands and musculoskeletal health. Questionnaire data was collected in 2009 (n = 138, response rate 76.2%) and 2011 (n = 80, response rate 54%). Forty-six home care workers responded at both waves. Respondents were assigned into 'high', 'moderate' and 'low' strain groups based on their responses to open and closed survey questions regarding impact of the two measures. One-way ANOVA with post-hoc t-tests and regression analyses investigated group differences and examined development in variables. Perceived work demands and health effects over the two-year study period were unchanged overall, yet significant differences between subgroups were highlighted. Work demands and shoulder-neck pain remained high for high-strain workers, but were reduced for low and moderate strain workers. Management should be aware of diversity in worker responses to rationalizations and give priority to supplementary, targeted measures to counteract adverse effects. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  13. Demand Response Spinning Reserve Demonstration

    Energy Technology Data Exchange (ETDEWEB)

    Eto, Joseph H.; Nelson-Hoffman, Janine; Torres, Carlos; Hirth,Scott; Yinger, Bob; Kueck, John; Kirby, Brendan; Bernier, Clark; Wright,Roger; Barat, A.; Watson, David S.

    2007-05-01

    The Demand Response Spinning Reserve project is a pioneeringdemonstration of how existing utility load-management assets can providean important electricity system reliability resource known as spinningreserve. Using aggregated demand-side resources to provide spinningreserve will give grid operators at the California Independent SystemOperator (CAISO) and Southern California Edison (SCE) a powerful, newtool to improve system reliability, prevent rolling blackouts, and lowersystem operating costs.

  14. Balancing supply and demand resources

    International Nuclear Information System (INIS)

    Sinha, J.; Saleeby, R.G.

    1990-01-01

    This article deals with using demand-side management (DSM) resources as an effective means of balancing supply and demand as a part of least-cost planning. The authors present a more sophisticated application of the load forecast adjustment method that reduces the number of DSM programs that need to be evaluated and provides blocks large enough to eliminate resolution problems in production costing models

  15. Electrical Resistance Measurements and Microstructural Characterization of the Anode/Interconnect Contact in Simulated Anode-Side SOFC Conditions

    DEFF Research Database (Denmark)

    Harthøj, Anders; Alimadadi, Hossein; Holt, Tobias

    2015-01-01

    in phase transformation of the steel and in formation of oxides with a poor electrical conductivity in the anode. In this study, the area specific resistance (ASR) of the steel Crofer 22 APU, in contact with a Ni/YSZ anode with and without a tape casted CeO2 barrier layer was measured in simulated SOFC...... anode conditions at 800◦C. The microstructure in the contact area was characterized using scanning electron microscopy techniques. The ASR was low for the steel in direct contact with the Ni/YSZ anode. Nickel diffusion into the steel resulted in a fine grained zone, which was identified as ferrite...

  16. On energy demand

    International Nuclear Information System (INIS)

    Haefele, W.

    1977-01-01

    Since the energy crisis, a number of energy plans have been proposed, and almost all of these envisage some kind of energy demand adaptations or conservation measures, hoping thus to escape the anticipated problems of energy supply. However, there seems to be no clear explanation of the basis on which our foreseeable future energy problems could be eased. And in fact, a first attempt at a more exact definition of energy demand and its interaction with other objectives, such as economic ones, shows that it is a highly complex concept which we still hardly understand. The article explains in some detail why it is so difficult to understand energy demand

  17. Preoperative cow-side lactatemia measurement predicts negative outcome in Holstein dairy cattle with right abomasal disorders.

    Science.gov (United States)

    Boulay, G; Francoz, D; Doré, E; Dufour, S; Veillette, M; Badillo, M; Bélanger, A-M; Buczinski, S

    2014-01-01

    The objectives of the current study were (1) to determine the gain in prognostic accuracy of preoperative l-lactate concentration (LAC) measured on farm on cows with right displaced abomasum (RDA) or abomasal volvulus (AV) for predicting negative outcome; and (2) to suggest clinically relevant thresholds for such use. A cohort of 102 cows with on-farm surgical diagnostic of RDA or AV was obtained from June 2009 through December 2011. Blood was drawn from coccygeal vessels before surgery and plasma LAC was immediately measured by using a portable clinical analyzer. Dairy producers were interviewed by phone 30 d following surgery and the outcome was determined: a positive outcome if the owner was satisfied of the overall evolution 30 d postoperatively, and a negative outcome if the cow was culled, died, or if the owner reported being unsatisfied 30 d postoperatively. The area under the curve of the receiver operating characteristic curve for LAC was 0.92 and was significantly greater than the area under the curve of the receiver operating characteristic curve of heart rate (HR; 0.77), indicating that LAC, in general, performed better than HR to predict a negative outcome. Furthermore, the ability to predict a negative outcome was significantly improved when LAC measurement was considered in addition to the already available HR data (area under the curve: 0.93 and 95% confidence interval: 0.87, 0.99). Important inflection points of the misclassification cost term function were noted at thresholds of 2 and 6 mmol/L, suggesting the potential utility of these cut-points. The 2 and 6 mmol/L thresholds had a sensitivity, specificity, positive predictive value, and negative predictive value for predicting a negative outcome of 76.2, 82.7, 53.3, and 93.1%, and of 28.6, 97.5, 75, and 84%, respectively. In terms of clinical interpretation, LAC ≤2 mmol/L appeared to be a good indicator of positive outcome and could be used to support a surgical treatment decision. The

  18. Development of "same side" flavour tagging algorithms for measurements of flavour oscillations and $CP$ violation in the $B^0$ mesons system

    CERN Document Server

    Fazzini, Davide; Khanji, Basem

    In this thesis new developments of $\\textit{Flavour Tagging}$ algorithms for the $LHCb$ experiment are presented. The $\\textit{Flavour Tagging}$ is a very usefull tool which allows to determine the flavour of the reconstructed particles, such as the $B^0$ mesons. A correctly identification of the flavour is fundamental in certain measurements such as time-dependent $CP$ violation asymmetries or the $B^0 \\leftrightarrow \\overline{B}^0$ oscillations. Both these type of measurements are exploited by LHCb experiment in the research of new physics beyond the Standard Model. The new developments achieved in this work concern an optimization of the $\\textit{Same Side Tagger}$ algorithms, using protons and pions correlated in charge with the signal $B^0$ to infer its initial flavour. Then two combinations are implemented: the first is a combination of the $\\textit{SS Pion Tagger}$ ($SS\\pi$) and the $\\textit{SS Proton Tagger}$ ($SSp$) in a unique $\\textit{Same Side}$ ($SS$) tagging algorithm; the second one is the fi...

  19. LHCb - First measurements of long-range near-side angular correlations in $\\sqrt {^SNN} = 5$ TeV proton-lead collisions in the forward region

    CERN Multimedia

    Yang, Zhenwei

    2015-01-01

    Two-particle angular correlations are studied in proton-lead collisions at a nucleon-nucleon centre-of-mass energy of $\\sqrt {^SNN} = 5$ TeV, collected with the LHCb detector at the LHC. The analysis is based on data recorded in two opposing beam configurations, in which either the direction of the proton or that of the lead remnant is analysed. The correlations are measured as a function of relative pseudorapidity, $\\Delta \\eta$, and relative azimuthal angle, $\\Delta \\phi$, for events in different classes of event activity and for different bins of particle transverse momentum. In high-activity events a long-range correlation on the near side is observed in the pseudorapidity range $2.0 < \\eta < 4.9$. This is the first measurement of a long-range correlation on the near side in proton-lead collisions in the forward region and extends previous observations in the central region. The correlation increases with growing event activity and is found to be more pronounced in the direction of the lead beam. Wh...

  20. Measurements of long-range near-side angular correlations in $\\sqrt{s_{\\text{NN}}}=5$TeV proton-lead collisions in the forward region

    CERN Document Server

    Aaij, Roel; Adeva, Bernardo; Adinolfi, Marco; Affolder, Anthony; Ajaltouni, Ziad; Akar, Simon; Albrecht, Johannes; Alessio, Federico; Alexander, Michael; Ali, Suvayu; Alkhazov, Georgy; Alvarez Cartelle, Paula; Alves Jr, Antonio Augusto; Amato, Sandra; Amerio, Silvia; Amhis, Yasmine; An, Liupan; Anderlini, Lucio; Anderson, Jonathan; Andreassi, Guido; Andreotti, Mirco; Andrews, Jason; Appleby, Robert; Aquines Gutierrez, Osvaldo; Archilli, Flavio; d'Argent, Philippe; Artamonov, Alexander; Artuso, Marina; Aslanides, Elie; Auriemma, Giulio; Baalouch, Marouen; Bachmann, Sebastian; Back, John; Badalov, Alexey; Baesso, Clarissa; Baldini, Wander; Barlow, Roger; Barschel, Colin; Barsuk, Sergey; Barter, William; Batozskaya, Varvara; Battista, Vincenzo; Bay, Aurelio; Beaucourt, Leo; Beddow, John; Bedeschi, Franco; Bediaga, Ignacio; Bel, Lennaert; Bellee, Violaine; Belloli, Nicoletta; Belyaev, Ivan; Ben-Haim, Eli; Bencivenni, Giovanni; Benson, Sean; Benton, Jack; Berezhnoy, Alexander; Bernet, Roland; Bertolin, Alessandro; Bettler, Marc-Olivier; van Beuzekom, Martinus; Bien, Alexander; Bifani, Simone; Billoir, Pierre; Bird, Thomas; Birnkraut, Alex; Bizzeti, Andrea; Blake, Thomas; Blanc, Frédéric; Blouw, Johan; Blusk, Steven; Bocci, Valerio; Bondar, Alexander; Bondar, Nikolay; Bonivento, Walter; Borghi, Silvia; Borsato, Martino; Bowcock, Themistocles; Bowen, Espen Eie; Bozzi, Concezio; Braun, Svende; Britsch, Markward; Britton, Thomas; Brodzicka, Jolanta; Brook, Nicholas; Buchanan, Emma; Burr, Christopher; Bursche, Albert; Buytaert, Jan; Cadeddu, Sandro; Calabrese, Roberto; Calvi, Marta; Calvo Gomez, Miriam; Campana, Pierluigi; Campora Perez, Daniel; Capriotti, Lorenzo; Carbone, Angelo; Carboni, Giovanni; Cardinale, Roberta; Cardini, Alessandro; Carniti, Paolo; Carson, Laurence; Carvalho Akiba, Kazuyoshi; Casse, Gianluigi; Cassina, Lorenzo; Castillo Garcia, Lucia; Cattaneo, Marco; Cauet, Christophe; Cavallero, Giovanni; Cenci, Riccardo; Charles, Matthew; Charpentier, Philippe; Chefdeville, Maximilien; Chen, Shanzhen; Cheung, Shu-Faye; Chiapolini, Nicola; Chrzaszcz, Marcin; Cid Vidal, Xabier; Ciezarek, Gregory; Clarke, Peter; Clemencic, Marco; Cliff, Harry; Closier, Joel; Coco, Victor; Cogan, Julien; Cogneras, Eric; Cogoni, Violetta; Cojocariu, Lucian; Collazuol, Gianmaria; Collins, Paula; Comerma-Montells, Albert; Contu, Andrea; Cook, Andrew; Coombes, Matthew; Coquereau, Samuel; Corti, Gloria; Corvo, Marco; Couturier, Benjamin; Cowan, Greig; Craik, Daniel Charles; Crocombe, Andrew; Cruz Torres, Melissa Maria; Cunliffe, Samuel; Currie, Robert; D'Ambrosio, Carmelo; Dall'Occo, Elena; Dalseno, Jeremy; David, Pieter; Davis, Adam; De Aguiar Francisco, Oscar; De Bruyn, Kristof; De Capua, Stefano; De Cian, Michel; De Miranda, Jussara; De Paula, Leandro; De Simone, Patrizia; Dean, Cameron Thomas; Decamp, Daniel; Deckenhoff, Mirko; Del Buono, Luigi; Déléage, Nicolas; Demmer, Moritz; Derkach, Denis; Deschamps, Olivier; Dettori, Francesco; Dey, Biplab; Di Canto, Angelo; Di Ruscio, Francesco; Dijkstra, Hans; Donleavy, Stephanie; Dordei, Francesca; Dorigo, Mirco; Dosil Suárez, Alvaro; Dossett, David; Dovbnya, Anatoliy; Dreimanis, Karlis; Dufour, Laurent; Dujany, Giulio; Dupertuis, Frederic; Durante, Paolo; Dzhelyadin, Rustem; Dziurda, Agnieszka; Dzyuba, Alexey; Easo, Sajan; Egede, Ulrik; Egorychev, Victor; Eidelman, Semen; Eisenhardt, Stephan; Eitschberger, Ulrich; Ekelhof, Robert; Eklund, Lars; El Rifai, Ibrahim; Elsasser, Christian; Ely, Scott; Esen, Sevda; Evans, Hannah Mary; Evans, Timothy; Falabella, Antonio; Färber, Christian; Farley, Nathanael; Farry, Stephen; Fay, Robert; Ferguson, Dianne; Fernandez Albor, Victor; Ferrari, Fabio; Ferreira Rodrigues, Fernando; Ferro-Luzzi, Massimiliano; Filippov, Sergey; Fiore, Marco; Fiorini, Massimiliano; Firlej, Miroslaw; Fitzpatrick, Conor; Fiutowski, Tomasz; Fohl, Klaus; Fol, Philip; Fontana, Marianna; Fontanelli, Flavio; Forshaw, Dean Charles; Forty, Roger; Frank, Markus; Frei, Christoph; Frosini, Maddalena; Fu, Jinlin; Furfaro, Emiliano; Gallas Torreira, Abraham; Galli, Domenico; Gallorini, Stefano; Gambetta, Silvia; Gandelman, Miriam; Gandini, Paolo; Gao, Yuanning; García Pardiñas, Julián; Garra Tico, Jordi; Garrido, Lluis; Gascon, David; Gaspar, Clara; Gauld, Rhorry; Gavardi, Laura; Gazzoni, Giulio; Gerick, David; Gersabeck, Evelina; Gersabeck, Marco; Gershon, Timothy; Ghez, Philippe; Gianì, Sebastiana; Gibson, Valerie; Girard, Olivier Göran; Giubega, Lavinia-Helena; Gligorov, V.V.; Göbel, Carla; Golubkov, Dmitry; Golutvin, Andrey; Gomes, Alvaro; Gotti, Claudio; Grabalosa Gándara, Marc; Graciani Diaz, Ricardo; Granado Cardoso, Luis Alberto; Graugés, Eugeni; Graverini, Elena; Graziani, Giacomo; Grecu, Alexandru; Greening, Edward; Gregson, Sam; Griffith, Peter; Grillo, Lucia; Grünberg, Oliver; Gui, Bin; Gushchin, Evgeny; Guz, Yury; Gys, Thierry; Hadavizadeh, Thomas; Hadjivasiliou, Christos; Haefeli, Guido; Haen, Christophe; Haines, Susan; Hall, Samuel; Hamilton, Brian; Han, Xiaoxue; Hansmann-Menzemer, Stephanie; Harnew, Neville; Harnew, Samuel; Harrison, Jonathan; He, Jibo; Head, Timothy; Heijne, Veerle; Heister, Arno; Hennessy, Karol; Henrard, Pierre; Henry, Louis; Hernando Morata, Jose Angel; van Herwijnen, Eric; Heß, Miriam; Hicheur, Adlène; Hill, Donal; Hoballah, Mostafa; Hombach, Christoph; Hulsbergen, Wouter; Humair, Thibaud; Hussain, Nazim; Hutchcroft, David; Hynds, Daniel; Idzik, Marek; Ilten, Philip; Jacobsson, Richard; Jaeger, Andreas; Jalocha, Pawel; Jans, Eddy; Jawahery, Abolhassan; Jing, Fanfan; John, Malcolm; Johnson, Daniel; Jones, Christopher; Joram, Christian; Jost, Beat; Jurik, Nathan; Kandybei, Sergii; Kanso, Walaa; Karacson, Matthias; Karbach, Moritz; Karodia, Sarah; Kecke, Matthieu; Kelsey, Matthew; Kenyon, Ian; Kenzie, Matthew; Ketel, Tjeerd; Khairullin, Egor; Khanji, Basem; Khurewathanakul, Chitsanu; Kirn, Thomas; Klaver, Suzanne; Klimaszewski, Konrad; Kochebina, Olga; Kolpin, Michael; Komarov, Ilya; Koopman, Rose; Koppenburg, Patrick; Kozeiha, Mohamad; Kravchuk, Leonid; Kreplin, Katharina; Kreps, Michal; Krocker, Georg; Krokovny, Pavel; Kruse, Florian; Krzemien, Wojciech; Kucewicz, Wojciech; Kucharczyk, Marcin; Kudryavtsev, Vasily; Kuonen, Axel Kevin; Kurek, Krzysztof; Kvaratskheliya, Tengiz; Lacarrere, Daniel; Lafferty, George; Lai, Adriano; Lambert, Dean; Lanfranchi, Gaia; Langenbruch, Christoph; Langhans, Benedikt; Latham, Thomas; Lazzeroni, Cristina; Le Gac, Renaud; van Leerdam, Jeroen; Lees, Jean-Pierre; Lefèvre, Regis; Leflat, Alexander; Lefrançois, Jacques; Lemos Cid, Edgar; Leroy, Olivier; Lesiak, Tadeusz; Leverington, Blake; Li, Yiming; Likhomanenko, Tatiana; Liles, Myfanwy; Lindner, Rolf; Linn, Christian; Lionetto, Federica; Liu, Bo; Liu, Xuesong; Loh, David; Longstaff, Iain; Lopes, Jose; Lucchesi, Donatella; Lucio Martinez, Miriam; Luo, Haofei; Lupato, Anna; Luppi, Eleonora; Lupton, Oliver; Lusiani, Alberto; Machefert, Frederic; Maciuc, Florin; Maev, Oleg; Maguire, Kevin; Malde, Sneha; Malinin, Alexander; Manca, Giulia; Mancinelli, Giampiero; Manning, Peter Michael; Mapelli, Alessandro; Maratas, Jan; Marchand, Jean François; Marconi, Umberto; Marin Benito, Carla; Marino, Pietro; Marks, Jörg; Martellotti, Giuseppe; Martin, Morgan; Martinelli, Maurizio; Martinez Santos, Diego; Martinez Vidal, Fernando; Martins Tostes, Danielle; Massafferri, André; Matev, Rosen; Mathad, Abhijit; Mathe, Zoltan; Matteuzzi, Clara; Mauri, Andrea; Maurin, Brice; Mazurov, Alexander; McCann, Michael; McCarthy, James; McNab, Andrew; McNulty, Ronan; Meadows, Brian; Meier, Frank; Meissner, Marco; Melnychuk, Dmytro; Merk, Marcel; Michielin, Emanuele; Milanes, Diego Alejandro; Minard, Marie-Noelle; Mitzel, Dominik Stefan; Molina Rodriguez, Josue; Monroy, Ignacio Alberto; Monteil, Stephane; Morandin, Mauro; Morawski, Piotr; Mordà, Alessandro; Morello, Michael Joseph; Moron, Jakub; Morris, Adam Benjamin; Mountain, Raymond; Muheim, Franz; Müller, Dominik; Müller, Janine; Müller, Katharina; Müller, Vanessa; Mussini, Manuel; Muster, Bastien; Naik, Paras; Nakada, Tatsuya; Nandakumar, Raja; Nandi, Anita; Nasteva, Irina; Needham, Matthew; Neri, Nicola; Neubert, Sebastian; Neufeld, Niko; Neuner, Max; Nguyen, Anh Duc; Nguyen, Thi-Dung; Nguyen-Mau, Chung; Niess, Valentin; Niet, Ramon; Nikitin, Nikolay; Nikodem, Thomas; Novoselov, Alexey; O'Hanlon, Daniel Patrick; Oblakowska-Mucha, Agnieszka; Obraztsov, Vladimir; Ogilvy, Stephen; Okhrimenko, Oleksandr; Oldeman, Rudolf; Onderwater, Gerco; Osorio Rodrigues, Bruno; Otalora Goicochea, Juan Martin; Otto, Adam; Owen, Patrick; Oyanguren, Maria Aranzazu; Palano, Antimo; Palombo, Fernando; Palutan, Matteo; Panman, Jacob; Papanestis, Antonios; Pappagallo, Marco; Pappalardo, Luciano; Pappenheimer, Cheryl; Parker, William; Parkes, Christopher; Passaleva, Giovanni; Patel, Girish; Patel, Mitesh; Patrignani, Claudia; Pearce, Alex; Pellegrino, Antonio; Penso, Gianni; Pepe Altarelli, Monica; Perazzini, Stefano; Perret, Pascal; Pescatore, Luca; Petridis, Konstantinos; Petrolini, Alessandro; Petruzzo, Marco; Picatoste Olloqui, Eduardo; Pietrzyk, Boleslaw; Pilař, Tomas; Pinci, Davide; Pistone, Alessandro; Piucci, Alessio; Playfer, Stephen; Plo Casasus, Maximo; Poikela, Tuomas; Polci, Francesco; Poluektov, Anton; Polyakov, Ivan; Polycarpo, Erica; Popov, Alexander; Popov, Dmitry; Popovici, Bogdan; Potterat, Cédric; Price, Eugenia; Price, Joseph David; Prisciandaro, Jessica; Pritchard, Adrian; Prouve, Claire; Pugatch, Valery; Puig Navarro, Albert; Punzi, Giovanni; Qian, Wenbin; Quagliani, Renato; Rachwal, Bartolomiej; Rademacker, Jonas; Rama, Matteo; Rangel, Murilo; Raniuk, Iurii; Rauschmayr, Nathalie; Raven, Gerhard; Redi, Federico; Reichert, Stefanie; Reid, Matthew; dos Reis, Alberto; Ricciardi, Stefania; Richards, Sophie; Rihl, Mariana; Rinnert, Kurt; Rives Molina, Vincente; Robbe, Patrick; Rodrigues, Ana Barbara; Rodrigues, Eduardo; Rodriguez Lopez, Jairo Alexis; Rodriguez Perez, Pablo; Roiser, Stefan; Romanovsky, Vladimir; Romero Vidal, Antonio; Ronayne, John William; Rotondo, Marcello; Rouvinet, Julien; Ruf, Thomas; Ruiz Valls, Pablo; Saborido Silva, Juan Jose; Sagidova, Naylya; Sail, Paul; Saitta, Biagio; Salustino Guimaraes, Valdir; Sanchez Mayordomo, Carlos; Sanmartin Sedes, Brais; Santacesaria, Roberta; Santamarina Rios, Cibran; Santimaria, Marco; Santovetti, Emanuele; Sarti, Alessio; Satriano, Celestina; Satta, Alessia; Saunders, Daniel Martin; Savrina, Darya; Schael, Stefan; Schiller, Manuel; Schindler, Heinrich; Schlupp, Maximilian; Schmelling, Michael; Schmelzer, Timon; Schmidt, Burkhard; Schneider, Olivier; Schopper, Andreas; Schubiger, Maxime; Schune, Marie Helene; Schwemmer, Rainer; Sciascia, Barbara; Sciubba, Adalberto; Semennikov, Alexander; Sergi, Antonino; Serra, Nicola; Serrano, Justine; Sestini, Lorenzo; Seyfert, Paul; Shapkin, Mikhail; Shapoval, Illya; Shcheglov, Yury; Shears, Tara; Shekhtman, Lev; Shevchenko, Vladimir; Shires, Alexander; Siddi, Benedetto Gianluca; Silva Coutinho, Rafael; Silva de Oliveira, Luiz Gustavo; Simi, Gabriele; Sirendi, Marek; Skidmore, Nicola; Skwarnicki, Tomasz; Smith, Edmund; Smith, Eluned; Smith, Iwan Thomas; Smith, Jackson; Smith, Mark; Snoek, Hella; Sokoloff, Michael; Soler, Paul; Soomro, Fatima; Souza, Daniel; Souza De Paula, Bruno; Spaan, Bernhard; Spradlin, Patrick; Sridharan, Srikanth; Stagni, Federico; Stahl, Marian; Stahl, Sascha; Stefkova, Slavomira; Steinkamp, Olaf; Stenyakin, Oleg; Stevenson, Scott; Stoica, Sabin; Stone, Sheldon; Storaci, Barbara; Stracka, Simone; Straticiuc, Mihai; Straumann, Ulrich; Sun, Liang; Sutcliffe, William; Swientek, Krzysztof; Swientek, Stefan; Syropoulos, Vasileios; Szczekowski, Marek; Szumlak, Tomasz; T'Jampens, Stephane; Tayduganov, Andrey; Tekampe, Tobias; Teklishyn, Maksym; Tellarini, Giulia; Teubert, Frederic; Thomas, Christopher; Thomas, Eric; van Tilburg, Jeroen; Tisserand, Vincent; Tobin, Mark; Todd, Jacob; Tolk, Siim; Tomassetti, Luca; Tonelli, Diego; Topp-Joergensen, Stig; Torr, Nicholas; Tournefier, Edwige; Tourneur, Stephane; Trabelsi, Karim; Tran, Minh Tâm; Tresch, Marco; Trisovic, Ana; Tsaregorodtsev, Andrei; Tsopelas, Panagiotis; Tuning, Niels; Ukleja, Artur; Ustyuzhanin, Andrey; Uwer, Ulrich; Vacca, Claudia; Vagnoni, Vincenzo; Valenti, Giovanni; Vallier, Alexis; Vazquez Gomez, Ricardo; Vazquez Regueiro, Pablo; Vázquez Sierra, Carlos; Vecchi, Stefania; van Veghel, Maarten; Velthuis, Jaap; Veltri, Michele; Veneziano, Giovanni; Vesterinen, Mika; Viaud, Benoit; Vieira, Daniel; Vieites Diaz, Maria; Vilasis-Cardona, Xavier; Volkov, Vladimir; Vollhardt, Achim; Volyanskyy, Dmytro; Voong, David; Vorobyev, Alexey; Vorobyev, Vitaly; Voß, Christian; de Vries, Jacco; Waldi, Roland; Wallace, Charlotte; Wallace, Ronan; Walsh, John; Wandernoth, Sebastian; Wang, Jianchun; Ward, David; Watson, Nigel; Websdale, David; Weiden, Andreas; Whitehead, Mark; Wilkinson, Guy; Wilkinson, Michael; Williams, Mark Richard James; Williams, Matthew; Williams, Mike; Williams, Timothy; Wilson, Fergus; Wimberley, Jack; Wishahi, Julian; Wislicki, Wojciech; Witek, Mariusz; Wormser, Guy; Wotton, Stephen; Wright, Simon; Wyllie, Kenneth; Xie, Yuehong; Xu, Zhirui; Yang, Zhenwei; Yu, Jiesheng; Yuan, Xuhao; Yushchenko, Oleg; Zangoli, Maria; Zavertyaev, Mikhail; Zhang, Liming; Zhang, Yanxi; Zhelezov, Alexey; Zhokhov, Anatoly; Zhong, Liang; Zhukov, Valery; Zucchelli, Stefano

    2016-11-10

    Two-particle angular correlations are studied in proton-lead collisions at a nucleon-nucleon centre-of-mass energy of $\\sqrt{s_{\\text{NN}}}=5$TeV, collected with the LHCb detector at the LHC. The analysis is based on data recorded in two beam configurations, in which either the direction of the proton or that of the lead ion is analysed. The correlations are measured as a function of relative pseudorapidity, $\\Delta\\eta$, and relative azimuthal angle, $\\Delta\\phi$, for events in different classes of event activity and for different bins of particle transverse momentum. In high-activity events a long-range correlation on the near side, $\\Delta\\phi \\approx 0$, is observed in the pseudorapidity range $2.0<\\eta<4.9$. This measurement of long-range correlations on the near side in proton-lead collisions extends previous observations into the forward region up to $\\eta=4.9$. The correlation increases with growing event activity and is found to be more pronounced in the direction of the lead beam. However, the...

  1. [Psychoanalysis and Side Effect].

    Science.gov (United States)

    Shirahase, Joichiro

    2015-01-01

    A study of psychoanalysis from the perspective of side effects reveals that its history was a succession of measures to deal with its own side effects. This, however, does not merely suggest that, as a treatment method, psychoanalysis is incomplete and weak: rather, its history is a record of the growth and development of psychoanalysis that discovered therapeutic significance from phenomena that were initially regarded as side effects, made use of these discoveries, and elaborated them as a treatment method. The approach of research seen during the course of these developments is linked to the basic therapeutic approach of psychoanalysis. A therapist therefore does not draw conclusions about a patient's words and behaviors from a single aspect, but continues to make efforts to actively discover a variety of meanings and values from them, and to make the patient's life richer and more productive. This therapeutic approach is undoubtedly one of the unique aspects of psychoanalysis. I discuss the issue of psychoanalysis and side effects with the aim of clarifying this unique characteristic of psychoanalysis. The phenomenon called resistance inevitably emerges during the process of psychoanalytic treatment. Resistance can not only obstruct the progress of therapy; it also carries the risk of causing a variety of disadvantages to the patient. It can therefore be seen as an adverse effect. However, if we re-examine this phenomenon from the perspective of transference, we find that resistance is in fact a crucial tool in psychoanalysis, and included in its main effect, rather than a side effect. From the perspective of minimizing the character of resistance as a side effect and maximizing its character as a main effect, I have reviewed logical organization, dynamic evaluation, the structuring of treatment, the therapist's attitudes, and the training of therapists. I conclude by stating that psychoanalysis has aspects that do not match the perspective known as a side

  2. A new approach to measuring the rebound effect associated to energy efficiency improvements: An application to the US residential energy demand

    International Nuclear Information System (INIS)

    Orea, Luis; Llorca, Manuel; Filippini, Massimo

    2015-01-01

    This paper brings attention to the fact that the energy demand frontier model introduced by Filippini and Hunt (2011, 2012) is closely connected to the measurement of the so-called rebound effect associated with improvements in energy efficiency. In particular, we show that their model implicitly imposes a zero rebound effect, which contradicts most of the available empirical evidence on this issue. We relax this restrictive assumption through the modelling of a rebound-effect function that mitigates or intensifies the effect of an efficiency improvement on energy consumption. We illustrate our model with an empirical application that aims to estimate a US frontier residential aggregate energy demand function using panel data for 48 states over the period 1995 to 2011. Average values of the rebound effect in the range of 56–80% are found. Therefore, policymakers should be aware that most of the expected energy reduction from efficiency improvements may not be achieved. - Highlights: • A new approach to measuring rebound effects in energy consumption is presented. • We illustrate our proposal with an application to US residential energy demand. • Relatively large rebound effects in the range of 56–80% are found. • Energy-inefficient states tend to exhibit low rebound effects. • We identify states where energy-saving policies should be more effective

  3. Road infrastructure and demand induction

    DEFF Research Database (Denmark)

    Nielsen, Thomas Alexander Sick; Hovgesen, Henrik Harder; Lahrmann, Harry

    2006-01-01

    a long screenline is used to measure the development in aggregate demand in selected corridors. The paper analyses demand induction by establishing time series of aggregate demand that is compared with the national traffic index. Significant trend breaks in the association between aggregate demand...... in the corridors and the national index, following the opening of motorways or bridges, indicates demand induction by infrastructure expansion in a number of instances. Lack of significant trend breaks following opening year is found in peripheral areas where major population centres are missing. This indicates...... the necessity of some latent demand within suitable travel range for new infrastructure elements to produce significant amounts of induced demand. Estimates of demand induction as a percentage of the realised demand five years after opening are between 10% and 67% for new motorway sections depending...

  4. In demand

    Energy Technology Data Exchange (ETDEWEB)

    Coleman, B. [Bridgestone Ltd. (United Kingdom)

    2005-11-01

    The paper explains how good relationships can help alleviate potential tyre shortages. Demand for large dump truck tyres (largely for China) has increased by 50% within 12 months. Bridgestone's manufacturing plants are operating at maximum capacity. The company supplies tyres to all vehicles at Scottish Coal's opencast coal mines. Its Tyre Management System (TMS) supplied free of charge to customers helps maximise tyre life and minimise downtime from data on pressure, tread and general conditions fed into the hand-held TMS computer. 3 photos.

  5. Three sides of the same coin: measuring global cognitive impairment with the MMSE, ADAS-cog and CAMCOG.

    Science.gov (United States)

    Wouters, Hans; van Gool, Willem A; Schmand, Ben; Zwinderman, Aeilko H; Lindeboom, Robert

    2010-08-01

    The total scores of the ADAS-cog, MMSE and CAMCOG, comprising various cognitive tasks, are widely used to measure a dimension of global cognitive impairment. It is unknown, however, whether this dimension is common to these instruments. This hampers comparisons when either of these instruments is used. The extent to which these instruments share a common dimension of global cognitive impairment and how their scores relate was examined. Rasch analysis of CAMCOG and MMSE data of participants from a population based study and two memory clinics pooled with ADAS-cog and MMSE data of participants from three RCTs (overall N = 1566) to estimate a common dimension of global cognitive impairment and to examine the goodness of fit of the individual items to this dimension. Using the estimated common dimension of global cognitive impairment, the total scores of the instruments could be related, e.g. a mean level of global cognitive impairment corresponded to a predicted score of 11.4 (ADAS-cog), 72.6 (CAMCOG) and 22.2 (MMSE). When revised according to The Rasch validity analyses, every individual item could be fitted to the dimension. The MMSE, ADAS-cog and CAMCOG reflect a valid common dimension of global cognitive impairment, which enables comparisons of RCTs that use the ADAS-cog and observational studies that use the CAMCOG and MMSE.

  6. Experimental measurements and analytical analysis related to gas turbine heat transfer. Part 1: Time-averaged heat-flux and surface-pressure measurements on the vanes and blades of the SSME fuel-side turbine and comparison with prediction. Part 2: Phase-resolved surface-pressure and heat-flux measurements on the first blade of the SSME fuel-side turbine

    Science.gov (United States)

    1994-01-01

    Time averaged Stanton number and surface-pressure distributions are reported for the first-stage vane row, the first stage blade row, and the second stage vane row of the Rocketdyne Space Shuttle Main Engine two-stage fuel-side turbine. Unsteady pressure envelope measurements for the first blade are also reported. These measurements were made at 10 percent, 50 percent, and 90 percent span on both the pressure and suction surfaces of the first stage components. Additional Stanton number measurements were made on the first stage blade platform blade tip, and shroud, and at 50 percent span on the second vane. A shock tube was used as a short duration source of heated and pressurized air to which the turbine was subjected. Platinum thin-film heat flux gages were used to obtain the heat flux measurements, while miniature silicon-diaphragm flush-mounted pressure transducers were used to obtain the pressure measurements. The first stage vane Stanton number distributions are compared with predictions obtained using a version of STAN5 and a quasi-3D Navier-Stokes solution. This same quasi-3D N-S code was also used to obtain predictions for the first blade and the second vane.

  7. Accounting for response behavior heterogeneity in the measurement of attitudes: an application to demand for electric vehicles

    OpenAIRE

    Glerum, Aurélie; Bierlaire, Michel

    2012-01-01

    Hybrid choice models have proved to be a powerful framework that integrates attitudinal and perceptional data into discrete choice models. However the measurement component of such a framework often fails to exploit individual-specific information that might affect the way subjects answer to indicators of opinion. In this paper we propose an HCM with a measurement model that takes into account heterogeneity in the response behavior. Precisely, we capture effects of exaggeration in answers to ...

  8. Observed side feeding in incomplete fusion dynamics in 16O + 160Gd reaction at energy ∼5.6 MeV/A: Spin distribution measurements

    Science.gov (United States)

    Ali, Rahbar; Afzal Ansari, M.; Singh, D.; Kumar, Rakesh; Singh, D. P.; Sharma, M. K.; Gupta, Unnati; Singh, B. P.; Shidling, P. D.; Negi, Dinesh; Muralithar, S.; Singh, R. P.; Bhowmik, R. K.

    2017-12-01

    Spin distributions of various residues populated via complete fusion (CF) and incomplete fusion (ICF) reactions in the interaction of 16O with 160Gd at the projectile energy Eproj ∼ 5.6 MeV/A have been studied. The experimentally measured spin distributions of the residues associated with the ICF reactions are found to be distinctly different from those populated via the CF reactions. An attempt has been made to extract the side-feeding pattern from the spin distributions of CF and ICF reaction products. It has been observed that the CF products are strongly fed over a broad spin range. But, no side-feeding takes place in the low observed spins as low partial waves are strongly hindered in the fast α-emission channels (associated with ICF) in the forward direction. It has also been observed that the mean input angular momentum for direct α-emitting (ICF) channels is relatively higher than evaporation α-emitting (CF) channels, and it increases with direct α-multiplicity in forward direction.

  9. Characterizing hydrophobicity of amino acid side chains in a protein environment via measuring contact angle of a water nanodroplet on planar peptide network.

    Science.gov (United States)

    Zhu, Chongqin; Gao, Yurui; Li, Hui; Meng, Sheng; Li, Lei; Francisco, Joseph S; Zeng, Xiao Cheng

    2016-11-15

    Hydrophobicity of macroscopic planar surface is conventionally characterized by the contact angle of water droplets. However, this engineering measurement cannot be directly extended to surfaces of proteins, due to the nanometer scale of amino acids and inherent nonplanar structures. To measure the hydrophobicity of side chains of proteins quantitatively, numerous parameters were developed to characterize behavior of hydrophobic solvation. However, consistency among these parameters is not always apparent. Herein, we demonstrate an alternative way of characterizing hydrophobicity of amino acid side chains in a protein environment by constructing a monolayer of amino acids (i.e., artificial planar peptide network) according to the primary and the β-sheet secondary structures of protein so that the conventional engineering measurement of the contact angle of a water droplet can be brought to bear. Using molecular dynamics simulations, contact angles θ of a water nanodroplet on the planar peptide network, together with excess chemical potentials of purely repulsive methane-sized Weeks-Chandler-Andersen solute, are computed. All of the 20 types of amino acids and the corresponding planar peptide networks are studied. Expectedly, all of the planar peptide networks with nonpolar amino acids are hydrophobic due to θ [Formula: see text] 90°, whereas all of the planar peptide networks of the polar and charged amino acids are hydrophilic due to θ [Formula: see text] 90°. Planar peptide networks of the charged amino acids exhibit complete-wetting behavior due to θ [Formula: see text] 0°. This computational approach for characterization of hydrophobicity can be extended to artificial planar networks of other soft matter.

  10. America's Opioid Epidemic: Supply and Demand Considerations.

    Science.gov (United States)

    Clark, David J; Schumacher, Mark A

    2017-11-01

    America is in the midst of an opioid epidemic characterized by aggressive prescribing practices, highly prevalent opioid misuse, and rising rates of prescription and illicit opioid overdose-related deaths. Medical and lay public sentiment have become more cautious with respect to prescription opioid use in the past few years, but a comprehensive strategy to reduce our reliance on prescription opioids is lacking. Addressing this epidemic through reductions in unnecessary access to these drugs while implementing measures to reduce demand will be important components of any comprehensive solution. Key supply-side measures include avoiding overprescribing, reducing diversion, and discouraging misuse through changes in drug formulations. Important demand-side measures center around educating patients and clinicians regarding the pitfalls of opioid overuse and methods to avoid unnecessary exposure to these drugs. Anesthesiologists, by virtue of their expertise in the use of these drugs and their position in guiding opioid use around the time of surgery, have important roles to play in reducing patient exposure to opioids and providing education about appropriate use. Aside from the many immediate steps that can be taken, clinical and basic research directed at understanding the interaction between pain and opioid misuse is critical to identifying the optimal use of these powerful pain relievers in clinical practice.

  11. Criteria for demand response systems

    NARCIS (Netherlands)

    Lampropoulos, I.; Kling, W.L.; Bosch, van den P.P.J.; Ribeiro, P.F.; Berg, van den J.

    2013-01-01

    The topic of demand side management is currently becoming more important than ever, in parallel with the further deregulation of the electricity sector, and the increasing integration of renewable energy sources. A historical review of automation integration in power system control assists in

  12. Self-tuning wireless power transmission scheme based on on-line scattering parameters measurement and two-side power matching.

    Science.gov (United States)

    Luo, Yanting; Yang, Yongmin; Chen, Zhongsheng

    2014-04-10

    Sub-resonances often happen in wireless power transmission (WPT) systems using coupled magnetic resonances (CMR) due to environmental changes, coil movements or component degradations, which is a serious challenge for high efficiency power transmission. Thus self-tuning is very significant to keep WPT systems following strongly magnetic resonant conditions in practice. Traditional coupled-mode ways is difficult to solve this problem. In this paper a two-port power wave model is presented, where power matching and the overall systemic power transmission efficiency are firstly defined by scattering (S) parameters. Then we propose a novel self-tuning scheme based on on-line S parameters measurements and two-side power matching. Experimental results testify the feasibility of the proposed method. These findings suggest that the proposed method is much potential to develop strongly self-adaptive WPT systems with CMR.

  13. Demand Response With Micro-CHP Systems

    NARCIS (Netherlands)

    Houwing, M.; Negenborn, R.R.; De Schutter, B.

    2011-01-01

    With the increasing application of distributed energy resources and novel information technologies in the electricity infrastructure, innovative possibilities to incorporate the demand side more actively in power system operation are enabled. A promising, controllable, residential distributed

  14. The 'CommTech' Methodology: A Demand-Driven Approach to Efficient, Productive and Measurable Technology Transfer

    Science.gov (United States)

    Horsham, Gray A. P.

    1998-01-01

    Market research sources were used to initially gather primary technological problems and needs data from non-aerospace companies in targeted industry sectors. The company-supplied information served as input data to activate or start-up an internal, phased match-making process. This process was based on technical-level relationship exploration followed by business-level agreement negotiations, and culminated with project management and execution. Space Act Agreements represented near-term outputs. Company product or process commercialization derived from Lewis support and measurable economic effects represented far-term outputs.

  15. The Commtech Methodology: A Demand-Driven Approach to Efficient, Productive, and Measurable Technology Transfer and Commercialization

    Science.gov (United States)

    Horsham, Gary A. P.

    1999-01-01

    This paper presents a comprehensive review and assessment of a demonstration technology transfer and commercialization prouram called "CommTech". The pro-ram was conceived and initiated in early to mid-fiscal year 1995, and extended roughly three years into the future. Market research sources were used to initially gather primary technological problems and needs data from non-aerospace companies in three targeted industry sectors: environmental, surface transportation, and bioengineering. Company-supplied information served as input data to activate or start-up an internal, phased matchmaking process. This process was based on technical-level relationship exploration followed by business-level agreement negotiations. and culminated with project management and execution. Space Act Agreements represented near-term outputs. Company product or process commercialization derived from NASA Glenn support and measurable economic effects represented far-term outputs.

  16. Load curve modelling of the residential segment electric power consumption applying a demand side energy management program; Modelagem da curva de carga das faixas de consumo de energia eletrica residencial a partir da aplicacao de um programa de gerenciamento de energia pelo lado da demanda

    Energy Technology Data Exchange (ETDEWEB)

    Rahde, Sergio Barbosa [Pontificia Univ. Catolica do Rio Grande do Sul, Porto Alegre (Brazil). Dept. de Engenharia Mecanica e Mecatronica]. E-mail: sergio@em.pucrs.br; Kaehler, Jose Wagner [Pontificia Univ. Catolica do Rio Grande do Sul, Porto Alegre (Brazil). Faculdade de Engenharia]. E-mail: kaehlerjw@pucrs.br

    2000-07-01

    The dissertation aims to offer a current vision on the use of electrical energy inside CEEE's newly defined area of operation. It also intends to propose different alternatives to set up a Demand Side Management (DSM) project to be carried out on the same market segment, through a Residential Load Management program. Starting from studies developed by DNAEE (the Brazilian federal government's agency for electrical energy), to establish the load curve characteristics, as well as from a research on electrical equipment ownership and electricity consumption habits, along with the contribution supplied by other utilities, especially in the US, an evaluation is offered, concerning several approaches to residential energy management, setting up conditions that simulate the residential segment's scenarios and their influence on the general system's load. (author)

  17. Spatial heterogeneity in utilities, equity and collective efficiency: the case of rural electrification and demand side management; Heterogeneite spatiale d'un service de reseau, equite et efficacite collective: la distribution rurale d'electricite et la maitrise de la demande

    Energy Technology Data Exchange (ETDEWEB)

    Nadaud, F

    2005-11-15

    This thesis has for object the evolution of the economic optimum in the electric industry under spatial equity constraint that present a strong spatial heterogeneity of its supply conditions. One analyses the evolution of the rural electrification regime in France both in terms of economic and social efficiency. We examine the rationality of extending the sectoral optimization under equity constraint to the rationalization of electricity end-uses in the heterogeneous space of rural electricity supply. To this question are given two responses. The firsts pertains to modify the incentives in the institutional regime of rural electrification so the MDE may be integrated in the strategies of rural electrification syndicates. One inspire from incentives mechanisms of the anglo-saxon DSM practice. The second is statistical zoning method of demand and distribution grid whose object is to localize action basins for large scale MDE projects. (author)

  18. Medications and Side Effects

    Science.gov (United States)

    ... to fully work. You might feel some side effects of your medication before your feel the benefits – ... as sleepiness, anxiety or headache) is a side effect or a symptom of your illness. Many side ...

  19. Survey of Models on Demand, Customer Base-Line and Demand Response and Their Relationships in the Power Market

    OpenAIRE

    Heshmati, Almas

    2012-01-01

    The increasing use of demand-side management as a tool to reliably meet electricity demand at peak time has stimulated interest among researchers, consumers and producer organizations, managers, regulators and policymakers, This research reviews the growing literature on models used to study demand, consumer baseline (CBL) and demand response in the electricity market. After characterizing the general demand models, it reviews consumer baseline based on which further study the demand response...

  20. Rapid jetting status inspection and accurate droplet volume measurement for a piezo drop-on-demand inkjet print head using a scanning mirror for display applications

    Science.gov (United States)

    Shin, Dong-Youn; Kim, Minsung

    2017-02-01

    Despite the inherent fabrication simplicity of piezo drop-on-demand inkjet printing, the non-uniform deposition of colourants or electroluminescent organic materials leads to faulty display products, and hence, the importance of rapid jetting status inspection and accurate droplet volume measurement increases from a process perspective. In this work, various jetting status inspections and droplet volume measurement methods are reviewed by discussing their advantages and disadvantages, and then, the opportunities for the developed prototype with a scanning mirror are explored. This work demonstrates that jetting status inspection of 384 fictitious droplets can be performed within 17 s with maximum and minimum measurement accuracies of 0.2 ± 0.5 μ m for the fictitious droplets of 50 μ m in diameter and -1.2 ± 0.3 μ m for the fictitious droplets of 30 μ m in diameter, respectively. In addition to the new design of an inkjet monitoring instrument with a scanning mirror, two novel methods to accurately measure the droplet volume by amplifying a minute droplet volume difference and then converting to other physical properties are suggested and the droplet volume difference of ±0.3% is demonstrated to be discernible using numerical simulations, even with the low measurement accuracy of 1 μ m . When the fact is considered that the conventional vision-based method with a CCD camera requires the optical measurement accuracy less than 25 nm to measure the volume of an in-flight droplet in the nominal diameter of 50 μ m at the same volume measurement accuracy, the suggested method with the developed prototype offers a whole new opportunity to inkjet printing for display applications.

  1. Achieving demand side management through eco-industrial networks

    International Nuclear Information System (INIS)

    Knight, N.

    2002-01-01

    This Power Point presentation describes the progress made by the Greater Vancouver Regional District (GVRD) in achieving sustainable development. The GVRD provides regional level infrastructure for drinking water, liquid waste treatment and solid waste management. Member municipalities provide the complementary services to businesses and residents of the communities. Particular emphasis has been given to protecting the green zone, building complete communities, achieving a compact Metropolitain region, and increasing transportation choices. The GVRD has also adopted a Livable Region Strategic Plan (LRSP) which encompasses economic, social and environmental issues. All member municipalities of the GVRD have prepared statements that indicate how their local policies will help achieve the LRSP goals. This presentation also includes a review of the region's air quality in order to emphasize the link between air quality and the pattern of urban development and transportation choices. The GVRD air quality management is unique in Canada. tabs., figs

  2. Foundation and economic consistency framework for demand side management actions

    International Nuclear Information System (INIS)

    Tabet, J.P.

    1994-01-01

    Since the first oil crisis, energy management constitutes one of the main lines of France's energy policy, together with the development of the national supply and the diversification of the origin of imported energy products. The priority given to petroleum product savings, the effort already made in the field of electro technologies and rational use of electricity, and the temporary surplus of nuclear generation capacity have resulted in less attention given by the players to energy conservation concerning electricity uses, or at least take this into account mainly for competitive uses. The evolution of the stakes involved makes it necessary today to re-examine the role of electricity DSM in the French energy system. This should be done particularly by identifying, through experimentation, the potentials and methods of electricity DSM programs that are desirable from the economic, social and environmental viewpoint. (au)

  3. Demand and Supply Side Management Strategies for Zero Energy Buildings

    DEFF Research Database (Denmark)

    Ghiasi, Mohammad Iman; Hajizadeh, Amin; Aliakbar Golkar, Masoud

    2017-01-01

    operational scenarios. Afterwards, the SSM strategy based on adaptive fuzzy control is proposed to control of power flow between hybrid renewable sources and PEVs of the main building for a short time interval. Moreover, an fuzzy sliding power control strategy for the controlling of battery energy storage...... is introduced to keep the balance between the requested power from building, PEV and output power of hybrid power generation resources. Simulation and experimental results are presented to validate the capability of the proposed power and energy flow control strategy....

  4. Cascaded column generation for scalable predictive demand side management

    NARCIS (Netherlands)

    Toersche, Hermen; Molderink, Albert; Hurink, Johann L.; Smit, Gerardus Johannes Maria

    2014-01-01

    We propose a nested Dantzig-Wolfe decomposition, combined with dynamic programming, for the distributed scheduling of a large heterogeneous fleet of residential appliances with nonlinear behavior. A cascaded column generation approach gives a scalable optimization strategy, provided that the problem

  5. Modeling Supermarket Refrigeration Systems for Demand-Side Management

    DEFF Research Database (Denmark)

    Shafiei, Seyed Ehsan; Rasmussen, Henrik; Stoustrup, Jakob

    2013-01-01

    Modeling of supermarket refrigeration systems for supervisory control in the smart grid is presented in this paper. A modular modeling approach is proposed in which each module is modeled and identified separately. The focus of the work is on estimating the power consumption of the system while...

  6. Strategic Demand-Side Response to Wind Power Integration

    DEFF Research Database (Denmark)

    Daraeepour, Ali; Kazempour, Seyyedjalal; Patiño-Echeverri, Dalia

    2016-01-01

    This paper explores the effects of allowing large, price-responsive consumers to provide reserves in a power system with significant penetration of wind energy. A bilevel optimization model represents the utility maximization problem of a large consumer, subject to a stochastic day-ahead co......-optimization of energy and reserves that a system operator would solve to clear the market while considering wind power uncertainty. An examination of the market outcomes from both an illustrative and a large-scale study using this model allows analysis of a) the effects of the type of behavior of the large consumer (i...

  7. Demand-side management: reflections of an irreverant regulator

    International Nuclear Information System (INIS)

    Katz, M.B.

    1992-01-01

    This paper describes methods of introducing energy conservation as an alternative to additional generation. Such strategies should be followed if conservation costs less than generation. However, many existing utility conservation programmes have not succeeded because they have increased utility costs while reducing utility sales thus resulting in reduced utility profits. Such programmes have also provided inequities for consumers. The paper compares a traditional conservation programme with an innovative program where utilities are able to charge consumers for energy saved as a result of utility conservation investment. This innovative programme eliminates many of the problems associated with the traditional programmes. 4 tabs

  8. Buildings sector demand-side efficiency technology summaries

    Energy Technology Data Exchange (ETDEWEB)

    Koomey, J.G.; Johnson, F.X.; Schuman, J. [and others

    1994-03-01

    This report provides descriptions of the following energy efficiency technologies: energy management systems; electronic fluorescent ballasts; compact fluorescent lamps; lighting controls; room air conditioners; high albedo materials, coatings and paints; solar domestic water heaters; heat pump water heaters; energy-efficient motors; adjustable-speed drives; energy-efficient refrigerators; daylight control glazing; insulating glazing; solar control glazing; switchable glazing; tree planting; and advanced insulation. For each technology, the report provides a description of performance characteristics, consumer utility, development status, technology standards, equipment cost, installation, maintenance, conservation programs, and environmental impacts.

  9. The energy situation and demand side management in Latvia

    International Nuclear Information System (INIS)

    Zebergs, V.; Zeltins, N.; Stuits, I.; Stripnieks, Yu.

    1994-01-01

    Only 12 per cent of the electric energy consumed in Latvia is produced by local energy resources(hydro-, peat, firewood). The rest (50 per cent) is imported or produced from the imported fuel (gas, heavy fuel). After 1991, when Latvia entered the market economy, the fuel prices began to approach the world prices and the production of electric energy decreased. Therefore it is important to work out a correct concept of Energy Development in Latvia corresponding to the market economy. (author)

  10. Competition Leverage : How the Demand Side Affects Optimal Risk Adjustment

    NARCIS (Netherlands)

    Bijlsma, M.; Boone, J.; Zwart, Gijsbert

    2011-01-01

    We study optimal risk adjustment in imperfectly competitive health insurance markets when high-risk consumers are less likely to switch insurer than low-risk consumers. First, we find that insurers still have an incentive to select even if risk adjustment perfectly corrects for cost differences

  11. Measurement of long-range near-side two-particle angular correlations in pp collisions at $\\sqrt{s} =$ 13 TeV

    CERN Document Server

    Khachatryan, Vardan; Tumasyan, Armen; Adam, Wolfgang; Aşılar, Ece; Bergauer, Thomas; Brandstetter, Johannes; Brondolin, Erica; Dragicevic, Marko; Erö, Janos; Flechl, Martin; Friedl, Markus; Fruehwirth, Rudolf; Ghete, Vasile Mihai; Hartl, Christian; Hörmann, Natascha; Hrubec, Josef; Jeitler, Manfred; Knünz, Valentin; König, Axel; Krammer, Manfred; Krätschmer, Ilse; Liko, Dietrich; Matsushita, Takashi; Mikulec, Ivan; Rabady, Dinyar; Rahbaran, Babak; Rohringer, Herbert; Schieck, Jochen; Schöfbeck, Robert; Strauss, Josef; Treberer-Treberspurg, Wolfgang; Waltenberger, Wolfgang; Wulz, Claudia-Elisabeth; Mossolov, Vladimir; Shumeiko, Nikolai; Suarez Gonzalez, Juan; Alderweireldt, Sara; Cornelis, Tom; De Wolf, Eddi A; Janssen, Xavier; Knutsson, Albert; Lauwers, Jasper; Luyckx, Sten; Van De Klundert, Merijn; Van Haevermaet, Hans; Van Mechelen, Pierre; Van Remortel, Nick; Van Spilbeeck, Alex; Abu Zeid, Shimaa; Blekman, Freya; D'Hondt, Jorgen; Daci, Nadir; De Bruyn, Isabelle; Deroover, Kevin; Heracleous, Natalie; Keaveney, James; Lowette, Steven; Moreels, Lieselotte; Olbrechts, Annik; Python, Quentin; Strom, Derek; Tavernier, Stefaan; Van Doninck, Walter; Van Mulders, Petra; Van Onsem, Gerrit Patrick; Van Parijs, Isis; Barria, Patrizia; Brun, Hugues; Caillol, Cécile; Clerbaux, Barbara; De Lentdecker, Gilles; Fasanella, Giuseppe; Favart, Laurent; Grebenyuk, Anastasia; Karapostoli, Georgia; Lenzi, Thomas; Léonard, Alexandre; Maerschalk, Thierry; Marinov, Andrey; Perniè, Luca; Randle-conde, Aidan; Seva, Tomislav; Vander Velde, Catherine; Vanlaer, Pascal; Yonamine, Ryo; Zenoni, Florian; Zhang, Fengwangdong; Beernaert, Kelly; Benucci, Leonardo; Cimmino, Anna; Crucy, Shannon; Dobur, Didar; Fagot, Alexis; Garcia, Guillaume; Gul, Muhammad; Mccartin, Joseph; Ocampo Rios, Alberto Andres; Poyraz, Deniz; Ryckbosch, Dirk; Salva Diblen, Sinem; Sigamani, Michael; Tytgat, Michael; Van Driessche, Ward; Yazgan, Efe; Zaganidis, Nicolas; Basegmez, Suzan; Beluffi, Camille; Bondu, Olivier; Brochet, Sébastien; Bruno, Giacomo; Caudron, Adrien; Ceard, Ludivine; Da Silveira, Gustavo Gil; Delaere, Christophe; Favart, Denis; Forthomme, Laurent; Giammanco, Andrea; Hollar, Jonathan; Jafari, Abideh; Jez, Pavel; Komm, Matthias; Lemaitre, Vincent; Mertens, Alexandre; Musich, Marco; Nuttens, Claude; Perrini, Lucia; Pin, Arnaud; Piotrzkowski, Krzysztof; Popov, Andrey; Quertenmont, Loic; Selvaggi, Michele; Vidal Marono, Miguel; Beliy, Nikita; Hammad, Gregory Habib; Aldá Júnior, Walter Luiz; Alves, Fábio Lúcio; Alves, Gilvan; Brito, Lucas; Correa Martins Junior, Marcos; Hamer, Matthias; Hensel, Carsten; Moraes, Arthur; Pol, Maria Elena; Rebello Teles, Patricia; Belchior Batista Das Chagas, Ewerton; Carvalho, Wagner; Chinellato, Jose; Custódio, Analu; Melo Da Costa, Eliza; De Jesus Damiao, Dilson; De Oliveira Martins, Carley; Fonseca De Souza, Sandro; Huertas Guativa, Lina Milena; Malbouisson, Helena; Matos Figueiredo, Diego; Mora Herrera, Clemencia; Mundim, Luiz; Nogima, Helio; Prado Da Silva, Wanda Lucia; Santoro, Alberto; Sznajder, Andre; Tonelli Manganote, Edmilson José; Vilela Pereira, Antonio; Ahuja, Sudha; Bernardes, Cesar Augusto; De Souza Santos, Angelo; Dogra, Sunil; Tomei, Thiago; De Moraes Gregores, Eduardo; Mercadante, Pedro G; Moon, Chang-Seong; Novaes, Sergio F; Padula, Sandra; Romero Abad, David; Ruiz Vargas, José Cupertino; Aleksandrov, Aleksandar; Hadjiiska, Roumyana; Iaydjiev, Plamen; Rodozov, Mircho; Stoykova, Stefka; Sultanov, Georgi; Vutova, Mariana; Dimitrov, Anton; Glushkov, Ivan; Litov, Leander; Pavlov, Borislav; Petkov, Peicho; Ahmad, Muhammad; Bian, Jian-Guo; Chen, Guo-Ming; Chen, He-Sheng; Chen, Mingshui; Cheng, Tongguang; Du, Ran; Jiang, Chun-Hua; Plestina, Roko; Romeo, Francesco; Shaheen, Sarmad Masood; Spiezia, Aniello; Tao, Junquan; Wang, Chunjie; Wang, Zheng; Zhang, Huaqiao; Asawatangtrakuldee, Chayanit; Ban, Yong; Li, Qiang; Liu, Shuai; Mao, Yajun; Qian, Si-Jin; Wang, Dayong; Xu, Zijun; Avila, Carlos; Cabrera, Andrés; Chaparro Sierra, Luisa Fernanda; Florez, Carlos; Gomez, Juan Pablo; Gomez Moreno, Bernardo; Sanabria, Juan Carlos; Godinovic, Nikola; Lelas, Damir; Puljak, Ivica; Ribeiro Cipriano, Pedro M; Antunovic, Zeljko; Kovac, Marko; Brigljevic, Vuko; Kadija, Kreso; Luetic, Jelena; Micanovic, Sasa; Sudic, Lucija; Attikis, Alexandros; Mavromanolakis, Georgios; Mousa, Jehad; Nicolaou, Charalambos; Ptochos, Fotios; Razis, Panos A; Rykaczewski, Hans; Bodlak, Martin; Finger, Miroslav; Finger Jr, Michael; El-khateeb, Esraa; Elkafrawy, Tamer; Mohamed, Amr; Salama, Elsayed; Calpas, Betty; Kadastik, Mario; Murumaa, Marion; Raidal, Martti; Tiko, Andres; Veelken, Christian; Eerola, Paula; Pekkanen, Juska; Voutilainen, Mikko; Härkönen, Jaakko; Karimäki, Veikko; Kinnunen, Ritva; Lampén, Tapio; Lassila-Perini, Kati; Lehti, Sami; Lindén, Tomas; Luukka, Panja-Riina; Peltola, Timo; Tuominen, Eija; Tuominiemi, Jorma; Tuovinen, Esa; Wendland, Lauri; Talvitie, Joonas; Tuuva, Tuure; Besancon, Marc; Couderc, Fabrice; Dejardin, Marc; Denegri, Daniel; Fabbro, Bernard; Faure, Jean-Louis; Favaro, Carlotta; Ferri, Federico; Ganjour, Serguei; Givernaud, Alain; Gras, Philippe; Hamel de Monchenault, Gautier; Jarry, Patrick; Locci, Elizabeth; Machet, Martina; Malcles, Julie; Rander, John; Rosowsky, André; Titov, Maksym; Zghiche, Amina; Antropov, Iurii; Baffioni, Stephanie; Beaudette, Florian; Busson, Philippe; Cadamuro, Luca; Chapon, Emilien; Charlot, Claude; Davignon, Olivier; Filipovic, Nicolas; Granier de Cassagnac, Raphael; Jo, Mihee; Lisniak, Stanislav; Mastrolorenzo, Luca; Miné, Philippe; Naranjo, Ivo Nicolas; Nguyen, Matthew; Ochando, Christophe; Ortona, Giacomo; Paganini, Pascal; Pigard, Philipp; Regnard, Simon; Salerno, Roberto; Sauvan, Jean-Baptiste; Sirois, Yves; Strebler, Thomas; Yilmaz, Yetkin; Zabi, Alexandre; Agram, Jean-Laurent; Andrea, Jeremy; Aubin, Alexandre; Bloch, Daniel; Brom, Jean-Marie; Buttignol, Michael; Chabert, Eric Christian; Chanon, Nicolas; Collard, Caroline; Conte, Eric; Coubez, Xavier; Fontaine, Jean-Charles; Gelé, Denis; Goerlach, Ulrich; Goetzmann, Christophe; Le Bihan, Anne-Catherine; Merlin, Jeremie Alexandre; Skovpen, Kirill; Van Hove, Pierre; Gadrat, Sébastien; Beauceron, Stephanie; Bernet, Colin; Boudoul, Gaelle; Bouvier, Elvire; Carrillo Montoya, Camilo Andres; Chierici, Roberto; Contardo, Didier; Courbon, Benoit; Depasse, Pierre; El Mamouni, Houmani; Fan, Jiawei; Fay, Jean; Gascon, Susan; Gouzevitch, Maxime; Ille, Bernard; Lagarde, Francois; Laktineh, Imad Baptiste; Lethuillier, Morgan; Mirabito, Laurent; Pequegnot, Anne-Laure; Perries, Stephane; Ruiz Alvarez, José David; Sabes, David; Sgandurra, Louis; Sordini, Viola; Vander Donckt, Muriel; Verdier, Patrice; Viret, Sébastien; Toriashvili, Tengizi; Tsamalaidze, Zviad; Autermann, Christian; Beranek, Sarah; Feld, Lutz; Heister, Arno; Kiesel, Maximilian Knut; Klein, Katja; Lipinski, Martin; Ostapchuk, Andrey; Preuten, Marius; Raupach, Frank; Schael, Stefan; Schulte, Jan-Frederik; Verlage, Tobias; Weber, Hendrik; Zhukov, Valery; Ata, Metin; Brodski, Michael; Dietz-Laursonn, Erik; Duchardt, Deborah; Endres, Matthias; Erdmann, Martin; Erdweg, Sören; Esch, Thomas; Fischer, Robert; Güth, Andreas; Hebbeker, Thomas; Heidemann, Carsten; Hoepfner, Kerstin; Knutzen, Simon; Kreuzer, Peter; Merschmeyer, Markus; Meyer, Arnd; Millet, Philipp; Mukherjee, Swagata; Olschewski, Mark; Padeken, Klaas; Papacz, Paul; Pook, Tobias; Radziej, Markus; Reithler, Hans; Rieger, Marcel; Scheuch, Florian; Sonnenschein, Lars; Teyssier, Daniel; Thüer, Sebastian; Cherepanov, Vladimir; Erdogan, Yusuf; Flügge, Günter; Geenen, Heiko; Geisler, Matthias; Hoehle, Felix; Kargoll, Bastian; Kress, Thomas; Kuessel, Yvonne; Künsken, Andreas; Lingemann, Joschka; Nehrkorn, Alexander; Nowack, Andreas; Nugent, Ian Michael; Pistone, Claudia; Pooth, Oliver; Stahl, Achim; Aldaya Martin, Maria; Asin, Ivan; Bartosik, Nazar; Behnke, Olaf; Behrens, Ulf; Bell, Alan James; Borras, Kerstin; Burgmeier, Armin; Campbell, Alan; Costanza, Francesco; Diez Pardos, Carmen; Dolinska, Ganna; Dooling, Samantha; Dorland, Tyler; Eckerlin, Guenter; Eckstein, Doris; Eichhorn, Thomas; Flucke, Gero; Gallo, Elisabetta; Garay Garcia, Jasone; Geiser, Achim; Gizhko, Andrii; Gunnellini, Paolo; Hauk, Johannes; Hempel, Maria; Jung, Hannes; Kalogeropoulos, Alexis; Karacheban, Olena; Kasemann, Matthias; Katsas, Panagiotis; Kieseler, Jan; Kleinwort, Claus; Korol, Ievgen; Lange, Wolfgang; Leonard, Jessica; Lipka, Katerina; Lobanov, Artur; Lohmann, Wolfgang; Mankel, Rainer; Marfin, Ihar; Melzer-Pellmann, Isabell-Alissandra; Meyer, Andreas Bernhard; Mittag, Gregor; Mnich, Joachim; Mussgiller, Andreas; Naumann-Emme, Sebastian; Nayak, Aruna; Ntomari, Eleni; Perrey, Hanno; Pitzl, Daniel; Placakyte, Ringaile; Raspereza, Alexei; Roland, Benoit; Sahin, Mehmet Özgür; Saxena, Pooja; Schoerner-Sadenius, Thomas; Seitz, Claudia; Spannagel, Simon; Trippkewitz, Karim Damun; Walsh, Roberval; Wissing, Christoph; Blobel, Volker; Centis Vignali, Matteo; Draeger, Arne-Rasmus; Erfle, Joachim; Garutti, Erika; Goebel, Kristin; Gonzalez, Daniel; Görner, Martin; Haller, Johannes; Hoffmann, Malte; Höing, Rebekka Sophie; Junkes, Alexandra; Klanner, Robert; Kogler, Roman; Kovalchuk, Nataliia; Lapsien, Tobias; Lenz, Teresa; Marchesini, Ivan; Marconi, Daniele; Meyer, Mareike; Nowatschin, Dominik; Ott, Jochen; Pantaleo, Felice; Peiffer, Thomas; Perieanu, Adrian; Pietsch, Niklas; Poehlsen, Jennifer; Rathjens, Denis; Sander, Christian; Scharf, Christian; Schettler, Hannes; Schleper, Peter; Schlieckau, Eike; Schmidt, Alexander; Schwandt, Joern; Sola, Valentina; Stadie, Hartmut; Steinbrück, Georg; Tholen, Heiner; Troendle, Daniel; Usai, Emanuele; Vanelderen, Lukas; Vanhoefer, Annika; Vormwald, Benedikt; Barth, Christian; Baur, Sebastian; Baus, Colin; Berger, Joram; Böser, Christian; Butz, Erik; Chwalek, Thorsten; Colombo, Fabio; De Boer, Wim; Descroix, Alexis; Dierlamm, Alexander; Fink, Simon; Frensch, Felix; Friese, Raphael; Giffels, Manuel; Gilbert, Andrew; Haitz, Dominik; Hartmann, Frank; Heindl, Stefan Michael; Husemann, Ulrich; Katkov, Igor; Kornmayer, Andreas; Lobelle Pardo, Patricia; Maier, Benedikt; Mildner, Hannes; Mozer, Matthias Ulrich; Müller, Thomas; Müller, Thomas; Plagge, Michael; Quast, Gunter; Rabbertz, Klaus; Röcker, Steffen; Roscher, Frank; Schröder, Matthias; Sieber, Georg; Simonis, Hans-Jürgen; Stober, Fred-Markus Helmut; Ulrich, Ralf; Wagner-Kuhr, Jeannine; Wayand, Stefan; Weber, Marc; Weiler, Thomas; Williamson, Shawn; Wöhrmann, Clemens; Wolf, Roger; Anagnostou, Georgios; Daskalakis, Georgios; Geralis, Theodoros; Giakoumopoulou, Viktoria Athina; Kyriakis, Aristotelis; Loukas, Demetrios; Psallidas, Andreas; Topsis-Giotis, Iasonas; Agapitos, Antonis; Kesisoglou, Stilianos; Panagiotou, Apostolos; Saoulidou, Niki; Tziaferi, Eirini; Evangelou, Ioannis; Flouris, Giannis; Foudas, Costas; Kokkas, Panagiotis; Loukas, Nikitas; Manthos, Nikolaos; Papadopoulos, Ioannis; Paradas, Evangelos; Strologas, John; Bencze, Gyorgy; Hajdu, Csaba; Hazi, Andras; Hidas, Pàl; Horvath, Dezso; Sikler, Ferenc; Veszpremi, Viktor; Vesztergombi, Gyorgy; Zsigmond, Anna Julia; Beni, Noemi; Czellar, Sandor; Karancsi, János; Molnar, Jozsef; Szillasi, Zoltan; Bartók, Márton; Makovec, Alajos; Raics, Peter; Trocsanyi, Zoltan Laszlo; Ujvari, Balazs; Choudhury, Somnath; Mal, Prolay; Mandal, Koushik; Sahoo, Deepak Kumar; Sahoo, Niladribihari; Swain, Sanjay Kumar; Bansal, Sunil; Beri, Suman Bala; Bhatnagar, Vipin; Chawla, Ridhi; Gupta, Ruchi; Bhawandeep, Bhawandeep; Kalsi, Amandeep Kaur; Kaur, Anterpreet; Kaur, Manjit; Kumar, Ramandeep; Mehta, Ankita; Mittal, Monika; Singh, Jasbir; Walia, Genius; Kumar, Ashok; Bhardwaj, Ashutosh; Choudhary, Brajesh C; Garg, Rocky Bala; Malhotra, Shivali; Naimuddin, Md; Nishu, Nishu; Ranjan, Kirti; Sharma, Ramkrishna; Sharma, Varun; Bhattacharya, Satyaki; Chatterjee, Kalyanmoy; Dey, Sourav; Dutta, Suchandra; Jain, Sandhya; Majumdar, Nayana; Modak, Atanu; Mondal, Kuntal; Mukhopadhyay, Supratik; Roy, Ashim; Roy, Debarati; Roy Chowdhury, Suvankar; Sarkar, Subir; Sharan, Manoj; Abdulsalam, Abdulla; Chudasama, Ruchi; Dutta, Dipanwita; Jha, Vishwajeet; Kumar, Vineet; Mohanty, Ajit Kumar; Pant, Lalit Mohan; Shukla, Prashant; Topkar, Anita; Aziz, Tariq; Banerjee, Sudeshna; Bhowmik, Sandeep; Chatterjee, Rajdeep Mohan; Dewanjee, Ram Krishna; Dugad, Shashikant; Ganguly, Sanmay; Ghosh, Saranya; Guchait, Monoranjan; Gurtu, Atul; Kole, Gouranga; Kumar, Sanjeev; Mahakud, Bibhuprasad; Maity, Manas; Majumder, Gobinda; Mazumdar, Kajari; Mitra, Soureek; Mohanty, Gagan Bihari; Parida, Bibhuti; Sarkar, Tanmay; Sur, Nairit; Sutar, Bajrang; Wickramage, Nadeesha; Chauhan, Shubhanshu; Dube, Sourabh; Kapoor, Anshul; Kothekar, Kunal; Sharma, Seema; Bakhshiansohi, Hamed; Behnamian, Hadi; Etesami, Seyed Mohsen; Fahim, Ali; Goldouzian, Reza; Khakzad, Mohsen; Mohammadi Najafabadi, Mojtaba; Naseri, Mohsen; Paktinat Mehdiabadi, Saeid; Rezaei Hosseinabadi, Ferdos; Safarzadeh, Batool; Zeinali, Maryam; Felcini, Marta; Grunewald, Martin; Abbrescia, Marcello; Calabria, Cesare; Caputo, Claudio; Colaleo, Anna; Creanza, Donato; Cristella, Leonardo; De Filippis, Nicola; De Palma, Mauro; Fiore, Luigi; Iaselli, Giuseppe; Maggi, Giorgio; Maggi, Marcello; Miniello, Giorgia; My, Salvatore; Nuzzo, Salvatore; Pompili, Alexis; Pugliese, Gabriella; Radogna, Raffaella; Ranieri, Antonio; Selvaggi, Giovanna; Silvestris, Lucia; Venditti, Rosamaria; Abbiendi, Giovanni; Battilana, Carlo; Benvenuti, Alberto; Bonacorsi, Daniele; Braibant-Giacomelli, Sylvie; Brigliadori, Luca; Campanini, Renato; Capiluppi, Paolo; Castro, Andrea; Cavallo, Francesca Romana; Chhibra, Simranjit Singh; Codispoti, Giuseppe; Cuffiani, Marco; Dallavalle, Gaetano-Marco; Fabbri, Fabrizio; Fanfani, Alessandra; Fasanella, Daniele; Giacomelli, Paolo; Grandi, Claudio; Guiducci, Luigi; Marcellini, Stefano; Masetti, Gianni; Montanari, Alessandro; Navarria, Francesco; Perrotta, Andrea; Rossi, Antonio; Rovelli, Tiziano; Siroli, Gian Piero; Tosi, Nicolò; Travaglini, Riccardo; Cappello, Gigi; Chiorboli, Massimiliano; Costa, Salvatore; Di Mattia, Alessandro; Giordano, Ferdinando; Potenza, Renato; Tricomi, Alessia; Tuve, Cristina; Barbagli, Giuseppe; Ciulli, Vitaliano; Civinini, Carlo; D'Alessandro, Raffaello; Focardi, Ettore; Gori, Valentina; Lenzi, Piergiulio; Meschini, Marco; Paoletti, Simone; Sguazzoni, Giacomo; Viliani, Lorenzo; Benussi, Luigi; Bianco, Stefano; Fabbri, Franco; Piccolo, Davide; Primavera, Federica; Calvelli, Valerio; Ferro, Fabrizio; Lo Vetere, Maurizio; Monge, Maria Roberta; Robutti, Enrico; Tosi, Silvano; Brianza, Luca; Dinardo, Mauro Emanuele; Fiorendi, Sara; Gennai, Simone; Gerosa, Raffaele; Ghezzi, Alessio; Govoni, Pietro; Malvezzi, Sandra; Manzoni, Riccardo Andrea; Marzocchi, Badder; Menasce, Dario; Moroni, Luigi; Paganoni, Marco; Pedrini, Daniele; Ragazzi, Stefano; Redaelli, Nicola; Tabarelli de Fatis, Tommaso; Buontempo, Salvatore; Cavallo, Nicola; Di Guida, Salvatore; Esposito, Marco; Fabozzi, Francesco; Iorio, Alberto Orso Maria; Lanza, Giuseppe; Lista, Luca; Meola, Sabino; Merola, Mario; Paolucci, Pierluigi; Sciacca, Crisostomo; Thyssen, Filip; Azzi, Patrizia; Bacchetta, Nicola; Benato, Lisa; Bisello, Dario; Boletti, Alessio; Branca, Antonio; Carlin, Roberto; Checchia, Paolo; Dall'Osso, Martino; Dorigo, Tommaso; Dosselli, Umberto; Gasparini, Fabrizio; Gasparini, Ugo; Gonella, Franco; Gozzelino, Andrea; Kanishchev, Konstantin; Lacaprara, Stefano; Margoni, Martino; Meneguzzo, Anna Teresa; Pazzini, Jacopo; Pozzobon, Nicola; Ronchese, Paolo; Simonetto, Franco; Torassa, Ezio; Tosi, Mia; Zanetti, Marco; Zotto, Pierluigi; Zucchetta, Alberto; Zumerle, Gianni; Braghieri, Alessandro; Magnani, Alice; Montagna, Paolo; Ratti, Sergio P; Re, Valerio; Riccardi, Cristina; Salvini, Paola; Vai, Ilaria; Vitulo, Paolo; Alunni Solestizi, Luisa; Bilei, Gian Mario; Ciangottini, Diego; Fanò, Livio; Lariccia, Paolo; Mantovani, Giancarlo; Menichelli, Mauro; Saha, Anirban; Santocchia, Attilio; Androsov, Konstantin; Azzurri, Paolo; Bagliesi, Giuseppe; Bernardini, Jacopo; Boccali, Tommaso; Castaldi, Rino; Ciocci, Maria Agnese; Dell'Orso, Roberto; Donato, Silvio; Fedi, Giacomo; Foà, Lorenzo; Giassi, Alessandro; Grippo, Maria Teresa; Ligabue, Franco; Lomtadze, Teimuraz; Martini, Luca; Messineo, Alberto; Palla, Fabrizio; Rizzi, Andrea; Savoy-Navarro, Aurore; Serban, Alin Titus; Spagnolo, Paolo; Tenchini, Roberto; Tonelli, Guido; Venturi, Andrea; Verdini, Piero Giorgio; Barone, Luciano; Cavallari, Francesca; D'imperio, Giulia; Del Re, Daniele; Diemoz, Marcella; Gelli, Simone; Jorda, Clara; Longo, Egidio; Margaroli, Fabrizio; Meridiani, Paolo; Organtini, Giovanni; Paramatti, Riccardo; Preiato, Federico; Rahatlou, Shahram; Rovelli, Chiara; Santanastasio, Francesco; Traczyk, Piotr; Amapane, Nicola; Arcidiacono, Roberta; Argiro, Stefano; Arneodo, Michele; Bellan, Riccardo; Biino, Cristina; Cartiglia, Nicolo; Costa, Marco; Covarelli, Roberto; Degano, Alessandro; Demaria, Natale; Finco, Linda; Kiani, Bilal; Mariotti, Chiara; Maselli, Silvia; Migliore, Ernesto; Monaco, Vincenzo; Monteil, Ennio; Obertino, Maria Margherita; Pacher, Luca; Pastrone, Nadia; Pelliccioni, Mario; Pinna Angioni, Gian Luca; Ravera, Fabio; Romero, Alessandra; Ruspa, Marta; Sacchi, Roberto; Solano, Ada; Staiano, Amedeo; Belforte, Stefano; Candelise, Vieri; Casarsa, Massimo; Cossutti, Fabio; Della Ricca, Giuseppe; Gobbo, Benigno; La Licata, Chiara; Marone, Matteo; Schizzi, Andrea; Zanetti, Anna; Kropivnitskaya, Anna; Nam, Soon-Kwon; Kim, Dong Hee; Kim, Gui Nyun; Kim, Min Suk; Kong, Dae Jung; Lee, Sangeun; Oh, Young Do; Sakharov, Alexandre; Son, Dong-Chul; Brochero Cifuentes, Javier Andres; Kim, Hyunsoo; Kim, Tae Jeong; Song, Sanghyeon; Choi, Suyong; Go, Yeonju; Gyun, Dooyeon; Hong, Byung-Sik; Kim, Hyunchul; Kim, Yongsun; Lee, Byounghoon; Lee, Kisoo; Lee, Kyong Sei; Lee, Songkyo; Park, Sung Keun; Roh, Youn; Yoo, Hwi Dong; Choi, Minkyoo; Kim, Hyunyong; Kim, Ji Hyun; Lee, Jason Sang Hun; Park, Inkyu; Ryu, Geonmo; Ryu, Min Sang; Choi, Young-Il; Goh, Junghwan; Kim, Donghyun; Kwon, Eunhyang; Lee, Jongseok; Yu, Intae; Dudenas, Vytautas; Juodagalvis, Andrius; Vaitkus, Juozas; Ahmed, Ijaz; Ibrahim, Zainol Abidin; Komaragiri, Jyothsna Rani; Md Ali, Mohd Adli Bin; Mohamad Idris, Faridah; Wan Abdullah, Wan Ahmad Tajuddin; Yusli, Mohd Nizam; Casimiro Linares, Edgar; Castilla-Valdez, Heriberto; De La Cruz-Burelo, Eduard; Heredia-De La Cruz, Ivan; Hernandez-Almada, Alberto; Lopez-Fernandez, Ricardo; Sánchez Hernández, Alberto; Carrillo Moreno, Salvador; Vazquez Valencia, Fabiola; Pedraza, Isabel; Salazar Ibarguen, Humberto Antonio; Morelos Pineda, Antonio; Krofcheck, David; Butler, Philip H; Ahmad, Ashfaq; Ahmad, Muhammad; Hassan, Qamar; Hoorani, Hafeez R; Khan, Wajid Ali; Khurshid, Taimoor; Shoaib, Muhammad; Bialkowska, Helena; Bluj, Michal; Boimska, Bożena; Frueboes, Tomasz; Górski, Maciej; Kazana, Malgorzata; Nawrocki, Krzysztof; Romanowska-Rybinska, Katarzyna; Szleper, Michal; Zalewski, Piotr; Brona, Grzegorz; Bunkowski, Karol; Byszuk, Adrian; Doroba, Krzysztof; Kalinowski, Artur; Konecki, Marcin; Krolikowski, Jan; Misiura, Maciej; Olszewski, Michal; Walczak, Marek; Bargassa, Pedrame; Beirão Da Cruz E Silva, Cristóvão; Di Francesco, Agostino; Faccioli, Pietro; Ferreira Parracho, Pedro Guilherme; Gallinaro, Michele; Leonardo, Nuno; Lloret Iglesias, Lara; Nguyen, Federico; Rodrigues Antunes, Joao; Seixas, Joao; Toldaiev, Oleksii; Vadruccio, Daniele; Varela, Joao; Vischia, Pietro; Afanasiev, Serguei; Bunin, Pavel; Gavrilenko, Mikhail; Golutvin, Igor; Gorbunov, Ilya; Kamenev, Alexey; Karjavin, Vladimir; Lanev, Alexander; Malakhov, Alexander; Matveev, Viktor; Moisenz, Petr; Palichik, Vladimir; Perelygin, Victor; Shmatov, Sergey; Shulha, Siarhei; Skatchkov, Nikolai; Smirnov, Vitaly; Zarubin, Anatoli; Golovtsov, Victor; Ivanov, Yury; Kim, Victor; Kuznetsova, Ekaterina; Levchenko, Petr; Murzin, Victor; Oreshkin, Vadim; Smirnov, Igor; Sulimov, Valentin; Uvarov, Lev; Vavilov, Sergey; Vorobyev, Alexey; Andreev, Yuri; Dermenev, Alexander; Gninenko, Sergei; Golubev, Nikolai; Karneyeu, Anton; Kirsanov, Mikhail; Krasnikov, Nikolai; Pashenkov, Anatoli; Tlisov, Danila; Toropin, Alexander; Epshteyn, Vladimir; Gavrilov, Vladimir; Lychkovskaya, Natalia; Popov, Vladimir; Pozdnyakov, Ivan; Safronov, Grigory; Spiridonov, Alexander; Vlasov, Evgueni; Zhokin, Alexander; Bylinkin, Alexander; Andreev, Vladimir; Azarkin, Maksim; Dremin, Igor; Kirakosyan, Martin; Leonidov, Andrey; Mesyats, Gennady; Rusakov, Sergey V; Baskakov, Alexey; Belyaev, Andrey; Boos, Edouard; Ershov, Alexander; Gribushin, Andrey; Khein, Lev; Klyukhin, Vyacheslav; Kodolova, Olga; Lokhtin, Igor; Lukina, Olga; Miagkov, Igor; Obraztsov, Stepan; Petrushanko, Sergey; Savrin, Viktor; Snigirev, Alexander; Azhgirey, Igor; Bayshev, Igor; Bitioukov, Sergei; Kachanov, Vassili; Kalinin, Alexey; Konstantinov, Dmitri; Krychkine, Victor; Petrov, Vladimir; Ryutin, Roman; Sobol, Andrei; Tourtchanovitch, Leonid; Troshin, Sergey; Tyurin, Nikolay; Uzunian, Andrey; Volkov, Alexey; Adzic, Petar; Cirkovic, Predrag; Milosevic, Jovan; Rekovic, Vladimir; Alcaraz Maestre, Juan; Calvo, Enrique; Cerrada, Marcos; Chamizo Llatas, Maria; Colino, Nicanor; De La Cruz, Begona; Delgado Peris, Antonio; Escalante Del Valle, Alberto; Fernandez Bedoya, Cristina; Fernández Ramos, Juan Pablo; Flix, Jose; Fouz, Maria Cruz; Garcia-Abia, Pablo; Gonzalez Lopez, Oscar; Goy Lopez, Silvia; Hernandez, Jose M; Josa, Maria Isabel; Navarro De Martino, Eduardo; Pérez-Calero Yzquierdo, Antonio María; Puerta Pelayo, Jesus; Quintario Olmeda, Adrián; Redondo, Ignacio; Romero, Luciano; Santaolalla, Javier; Senghi Soares, Mara; Albajar, Carmen; de Trocóniz, Jorge F; Missiroli, Marino; Moran, Dermot; Cuevas, Javier; Fernandez Menendez, Javier; Folgueras, Santiago; Gonzalez Caballero, Isidro; Palencia Cortezon, Enrique; Vizan Garcia, Jesus Manuel; Cabrillo, Iban Jose; Calderon, Alicia; Castiñeiras De Saa, Juan Ramon; De Castro Manzano, Pablo; Fernandez, Marcos; Garcia-Ferrero, Juan; Gomez, Gervasio; Lopez Virto, Amparo; Marco, Jesus; Marco, Rafael; Martinez Rivero, Celso; Matorras, Francisco; Piedra Gomez, Jonatan; Rodrigo, Teresa; Rodríguez-Marrero, Ana Yaiza; Ruiz-Jimeno, Alberto; Scodellaro, Luca; Trevisani, Nicolò; Vila, Ivan; Vilar Cortabitarte, Rocio; Abbaneo, Duccio; Auffray, Etiennette; Auzinger, Georg; Bachtis, Michail; Baillon, Paul; Ball, Austin; Barney, David; Benaglia, Andrea; Bendavid, Joshua; Benhabib, Lamia; Benitez, Jose F; Berruti, Gaia Maria; Bloch, Philippe; Bocci, Andrea; Bonato, Alessio; Botta, Cristina; Breuker, Horst; Camporesi, Tiziano; Castello, Roberto; Cerminara, Gianluca; D'Alfonso, Mariarosaria; D'Enterria, David; Dabrowski, Anne; Daponte, Vincenzo; David Tinoco Mendes, Andre; De Gruttola, Michele; De Guio, Federico; De Roeck, Albert; De Visscher, Simon; Di Marco, Emanuele; Dobson, Marc; Dordevic, Milos; Dorney, Brian; Du Pree, Tristan; Duggan, Daniel; Dünser, Marc; Dupont, Niels; Elliott-Peisert, Anna; Franzoni, Giovanni; Fulcher, Jonathan; Funk, Wolfgang; Gigi, Dominique; Gill, Karl; Giordano, Domenico; Girone, Maria; Glege, Frank; Guida, Roberto; Gundacker, Stefan; Guthoff, Moritz; Hammer, Josef; Harris, Philip; Hegeman, Jeroen; Innocente, Vincenzo; Janot, Patrick; Kirschenmann, Henning; Kortelainen, Matti J; Kousouris, Konstantinos; Krajczar, Krisztian; Lecoq, Paul; Lourenco, Carlos; Lucchini, Marco Toliman; Magini, Nicolo; Malgeri, Luca; Mannelli, Marcello; Martelli, Arabella; Masetti, Lorenzo; Meijers, Frans; Mersi, Stefano; Meschi, Emilio; Moortgat, Filip; Morovic, Srecko; Mulders, Martijn; Nemallapudi, Mythra Varun; Neugebauer, Hannes; Orfanelli, Styliani; Orsini, Luciano; Pape, Luc; Perez, Emmanuelle; Peruzzi, Marco; Petrilli, Achille; Petrucciani, Giovanni; Pfeiffer, Andreas; Pierini, Maurizio; Piparo, Danilo; Racz, Attila; Reis, Thomas; Rolandi, Gigi; Rovere, Marco; Ruan, Manqi; Sakulin, Hannes; Schäfer, Christoph; Schwick, Christoph; Seidel, Markus; Sharma, Archana; Silva, Pedro; Simon, Michal; Sphicas, Paraskevas; Steggemann, Jan; Stieger, Benjamin; Stoye, Markus; Takahashi, Yuta; Treille, Daniel; Triossi, Andrea; Tsirou, Andromachi; Veres, Gabor Istvan; Wardle, Nicholas; Wöhri, Hermine Katharina; Zagoździńska, Agnieszka; Zeuner, Wolfram Dietrich; Bertl, Willi; Deiters, Konrad; Erdmann, Wolfram; Horisberger, Roland; Ingram, Quentin; Kaestli, Hans-Christian; Kotlinski, Danek; Langenegger, Urs; Renker, Dieter; Rohe, Tilman; Bachmair, Felix; Bäni, Lukas; Bianchini, Lorenzo; Casal, Bruno; Dissertori, Günther; Dittmar, Michael; Donegà, Mauro; Eller, Philipp; Grab, Christoph; Heidegger, Constantin; Hits, Dmitry; Hoss, Jan; Kasieczka, Gregor; Lustermann, Werner; Mangano, Boris; Marionneau, Matthieu; Martinez Ruiz del Arbol, Pablo; Masciovecchio, Mario; Meister, Daniel; Micheli, Francesco; Musella, Pasquale; Nessi-Tedaldi, Francesca; Pandolfi, Francesco; Pata, Joosep; Pauss, Felicitas; Perrozzi, Luca; Quittnat, Milena; Rossini, Marco; Schönenberger, Myriam; Starodumov, Andrei; Takahashi, Maiko; Tavolaro, Vittorio Raoul; Theofilatos, Konstantinos; Wallny, Rainer; Aarrestad, Thea Klaeboe; Amsler, Claude; Caminada, Lea; Canelli, Maria Florencia; Chiochia, Vincenzo; De Cosa, Annapaola; Galloni, Camilla; Hinzmann, Andreas; Hreus, Tomas; Kilminster, Benjamin; Lange, Clemens; Ngadiuba, Jennifer; Pinna, Deborah; Rauco, Giorgia; Robmann, Peter; Ronga, Frederic Jean; Salerno, Daniel; Yang, Yong; Cardaci, Marco; Chen, Kuan-Hsin; Doan, Thi Hien; Jain, Shilpi; Khurana, Raman; Konyushikhin, Maxim; Kuo, Chia-Ming; Lin, Willis; Lu, Yun-Ju; Pozdnyakov, Andrey; Yu, Shin-Shan; Kumar, Arun; Bartek, Rachel; Chang, Paoti; Chang, You-Hao; Chang, Yu-Wei; Chao, Yuan; Chen, Kai-Feng; Chen, Po-Hsun; Dietz, Charles; Fiori, Francesco; Grundler, Ulysses; Hou, George Wei-Shu; Hsiung, Yee; Liu, Yueh-Feng; Lu, Rong-Shyang; Miñano Moya, Mercedes; Petrakou, Eleni; Tsai, Jui-fa; Tzeng, Yeng-Ming; Asavapibhop, Burin; Kovitanggoon, Kittikul; Singh, Gurpreet; Srimanobhas, Norraphat; Suwonjandee, Narumon; Adiguzel, Aytul; Cerci, Salim; Demiroglu, Zuhal Seyma; Dozen, Candan; Dumanoglu, Isa; Gecit, Fehime Hayal; Girgis, Semiray; Gokbulut, Gul; Guler, Yalcin; Gurpinar, Emine; Hos, Ilknur; Kangal, Evrim Ersin; Kayis Topaksu, Aysel; Onengut, Gulsen; Ozcan, Merve; Ozdemir, Kadri; Ozturk, Sertac; Tali, Bayram; Topakli, Huseyin; Vergili, Mehmet; Zorbilmez, Caglar; Akin, Ilina Vasileva; Bilin, Bugra; Bilmis, Selcuk; Isildak, Bora; Karapinar, Guler; Yalvac, Metin; Zeyrek, Mehmet; Gülmez, Erhan; Kaya, Mithat; Kaya, Ozlem; Yetkin, Elif Asli; Yetkin, Taylan; Cakir, Altan; Cankocak, Kerem; Sen, Sercan; Vardarlı, Fuat Ilkehan; Grynyov, Boris; Levchuk, Leonid; Sorokin, Pavel; Aggleton, Robin; Ball, Fionn; Beck, Lana; Brooke, James John; Clement, Emyr; Cussans, David; Flacher, Henning; Goldstein, Joel; Grimes, Mark; Heath, Greg P; Heath, Helen F; Jacob, Jeson; Kreczko, Lukasz; Lucas, Chris; Meng, Zhaoxia; Newbold, Dave M; Paramesvaran, Sudarshan; Poll, Anthony; Sakuma, Tai; Seif El Nasr-storey, Sarah; Senkin, Sergey; Smith, Dominic; Smith, Vincent J; Bell, Ken W; Belyaev, Alexander; Brew, Christopher; Brown, Robert M; Calligaris, Luigi; Cieri, Davide; Cockerill, David JA; Coughlan, John A; Harder, Kristian; Harper, Sam; Olaiya, Emmanuel; Petyt, David; Shepherd-Themistocleous, Claire; Thea, Alessandro; Tomalin, Ian R; Williams, Thomas; Worm, Steven; Baber, Mark; Bainbridge, Robert; Buchmuller, Oliver; Bundock, Aaron; Burton, Darren; Casasso, Stefano; Citron, Matthew; Colling, David; Corpe, Louie; Dauncey, Paul; Davies, Gavin; De Wit, Adinda; Della Negra, Michel; Dunne, Patrick; Elwood, Adam; Futyan, David; Hall, Geoffrey; Iles, Gregory; Lane, Rebecca; Lucas, Robyn; Lyons, Louis; Magnan, Anne-Marie; Malik, Sarah; Nash, Jordan; Nikitenko, Alexander; Pela, Joao; Pesaresi, Mark; Petridis, Konstantinos; Raymond, David Mark; Richards, Alexander; Rose, Andrew; Seez, Christopher; Tapper, Alexander; Uchida, Kirika; Vazquez Acosta, Monica; Virdee, Tejinder; Zenz, Seth Conrad; Cole, Joanne; Hobson, Peter R; Khan, Akram; Kyberd, Paul; Leggat, Duncan; Leslie, Dawn; Reid, Ivan; Symonds, Philip; Teodorescu, Liliana; Turner, Mark; Borzou, Ahmad; Call, Kenneth; Dittmann, Jay; Hatakeyama, Kenichi; Liu, Hongxuan; Pastika, Nathaniel; Charaf, Otman; Cooper, Seth; Henderson, Conor; Rumerio, Paolo; Arcaro, Daniel; Avetisyan, Aram; Bose, Tulika; Fantasia, Cory; Gastler, Daniel; Lawson, Philip; Rankin, Dylan; Richardson, Clint; Rohlf, James; St John, Jason; Sulak, Lawrence; Zou, David; Alimena, Juliette; Berry, Edmund; Cutts, David; Ferapontov, Alexey; Garabedian, Alex; Hakala, John; Heintz, Ulrich; Laird, Edward; Landsberg, Greg; Mao, Zaixing; Narain, Meenakshi; Piperov, Stefan; Sagir, Sinan; Syarif, Rizki; Breedon, Richard; Breto, Guillermo; Calderon De La Barca Sanchez, Manuel; Chauhan, Sushil; Chertok, Maxwell; Conway, John; Conway, Rylan; Cox, Peter Timothy; Erbacher, Robin; Funk, Garrett; Gardner, Michael; Ko, Winston; Lander, Richard; Mclean, Christine; Mulhearn, Michael; Pellett, Dave; Pilot, Justin; Ricci-Tam, Francesca; Shalhout, Shalhout; Smith, John; Squires, Michael; Stolp, Dustin; Tripathi, Mani; Wilbur, Scott; Yohay, Rachel; Cousins, Robert; Everaerts, Pieter; Florent, Alice; Hauser, Jay; Ignatenko, Mikhail; Saltzberg, David; Takasugi, Eric; Valuev, Vyacheslav; Weber, Matthias; Burt, Kira; Clare, Robert; Ellison, John Anthony; Gary, J William; Hanson, Gail; Heilman, Jesse; Ivova PANEVA, Mirena; Jandir, Pawandeep; Kennedy, Elizabeth; Lacroix, Florent; Long, Owen Rosser; Luthra, Arun; Malberti, Martina; Olmedo Negrete, Manuel; Shrinivas, Amithabh; Wei, Hua; Wimpenny, Stephen; Yates, Brent; Branson, James G; Cerati, Giuseppe Benedetto; Cittolin, Sergio; D'Agnolo, Raffaele Tito; Derdzinski, Mark; Holzner, André; Kelley, Ryan; Klein, Daniel; Letts, James; Macneill, Ian; Olivito, Dominick; Padhi, Sanjay; Pieri, Marco; Sani, Matteo; Sharma, Vivek; Simon, Sean; Tadel, Matevz; Vartak, Adish; Wasserbaech, Steven; Welke, Charles; Würthwein, Frank; Yagil, Avraham; Zevi Della Porta, Giovanni; Bradmiller-Feld, John; Campagnari, Claudio; Dishaw, Adam; Dutta, Valentina; Flowers, Kristen; Franco Sevilla, Manuel; Geffert, Paul; George, Christopher; Golf, Frank; Gouskos, Loukas; Gran, Jason; Incandela, Joe; Mccoll, Nickolas; Mullin, Sam Daniel; Richman, Jeffrey; Stuart, David; Suarez, Indara; West, Christopher; Yoo, Jaehyeok; Anderson, Dustin; Apresyan, Artur; Bornheim, Adolf; Bunn, Julian; Chen, Yi; Duarte, Javier; Mott, Alexander; Newman, Harvey B; Pena, Cristian; Spiropulu, Maria; Vlimant, Jean-Roch; Xie, Si; Zhu, Ren-Yuan; Andrews, Michael Benjamin; Azzolini, Virginia; Calamba, Aristotle; Carlson, Benjamin; Ferguson, Thomas; Paulini, Manfred; Russ, James; Sun, Menglei; Vogel, Helmut; Vorobiev, Igor; Cumalat, John Perry; Ford, William T; Gaz, Alessandro; Jensen, Frank; Johnson, Andrew; Krohn, Michael; Mulholland, Troy; Nauenberg, Uriel; Stenson, Kevin; Wagner, Stephen Robert; Alexander, James; Chatterjee, Avishek; Chaves, Jorge; Chu, Jennifer; Dittmer, Susan; Eggert, Nicholas; Mirman, Nathan; Nicolas Kaufman, Gala; Patterson, Juliet Ritchie; Rinkevicius, Aurelijus; Ryd, Anders; Skinnari, Louise; Soffi, Livia; Sun, Werner; Tan, Shao Min; Teo, Wee Don; Thom, Julia; Thompson, Joshua; Tucker, Jordan; Weng, Yao; Wittich, Peter; Abdullin, Salavat; Albrow, Michael; Apollinari, Giorgio; Banerjee, Sunanda; Bauerdick, Lothar AT; Beretvas, Andrew; Berryhill, Jeffrey; Bhat, Pushpalatha C; Bolla, Gino; Burkett, Kevin; Butler, Joel Nathan; Cheung, Harry; Chlebana, Frank; Cihangir, Selcuk; Elvira, Victor Daniel; Fisk, Ian; Freeman, Jim; Gottschalk, Erik; Gray, Lindsey; Green, Dan; Grünendahl, Stefan; Gutsche, Oliver; Hanlon, Jim; Hare, Daryl; Harris, Robert M; Hasegawa, Satoshi; Hirschauer, James; Hu, Zhen; Jayatilaka, Bodhitha; Jindariani, Sergo; Johnson, Marvin; Joshi, Umesh; Klima, Boaz; Kreis, Benjamin; Lammel, Stephan; Linacre, Jacob; Lincoln, Don; Lipton, Ron; Liu, Tiehui; Lopes De Sá, Rafael; Lykken, Joseph; Maeshima, Kaori; Marraffino, John Michael; Maruyama, Sho; Mason, David; McBride, Patricia; Merkel, Petra; Mrenna, Stephen; Nahn, Steve; Newman-Holmes, Catherine; O'Dell, Vivian; Pedro, Kevin; Prokofyev, Oleg; Rakness, Gregory; Sexton-Kennedy, Elizabeth; Soha, Aron; Spalding, William J; Spiegel, Leonard; Strobbe, Nadja; Taylor, Lucas; Tkaczyk, Slawek; Tran, Nhan Viet; Uplegger, Lorenzo; Vaandering, Eric Wayne; Vernieri, Caterina; Verzocchi, Marco; Vidal, Richard; Weber, Hannsjoerg Artur; Whitbeck, Andrew; Acosta, Darin; Avery, Paul; Bortignon, Pierluigi; Bourilkov, Dimitri; Carnes, Andrew; Carver, Matthew; Curry, David; Das, Souvik; Field, Richard D; Furic, Ivan-Kresimir; Gleyzer, Sergei V; Konigsberg, Jacobo; Korytov, Andrey; Kotov, Khristian; Ma, Peisen; Matchev, Konstantin; Mei, Hualin; Milenovic, Predrag; Mitselmakher, Guenakh; Rank, Douglas; Rossin, Roberto; Shchutska, Lesya; Snowball, Matthew; Sperka, David; Terentyev, Nikolay; Thom