WorldWideScience

Sample records for demand side energy

  1. Demand-Side Energy Management

    NARCIS (Netherlands)

    Molderink, Albert; Iniewski, K.

    2012-01-01

    Concerns about climate change, increasing energy prices and dependability of energy supply ask for drastic changes in the energy supply chain, but also in the current demand-supply philosophy. Current trends in energy consumptions result in an increasing and more fluctuating electricity usage, causi

  2. Intelligent demand side management of residential building energy systems

    Science.gov (United States)

    Sinha, Maruti N.

    Advent of modern sensing technologies, data processing capabilities and rising cost of energy are driving the implementation of intelligent systems in buildings and houses which constitute 41% of total energy consumption. The primary motivation has been to provide a framework for demand-side management and to improve overall reliability. The entire formulation is to be implemented on NILM (Non-Intrusive Load Monitoring System), a smart meter. This is going to play a vital role in the future of demand side management. Utilities have started deploying smart meters throughout the world which will essentially help to establish communication between utility and consumers. This research is focused on investigation of a suitable thermal model of residential house, building up control system and developing diagnostic and energy usage forecast tool. The present work has considered measurement based approach to pursue. Identification of building thermal parameters is the very first step towards developing performance measurement and controls. The proposed identification technique is PEM (Prediction Error Method) based, discrete state-space model. The two different models have been devised. First model is focused toward energy usage forecast and diagnostics. Here one of the novel idea has been investigated which takes integral of thermal capacity to identify thermal model of house. The purpose of second identification is to build up a model for control strategy. The controller should be able to take into account the weather forecast information, deal with the operating point constraints and at the same time minimize the energy consumption. To design an optimal controller, MPC (Model Predictive Control) scheme has been implemented instead of present thermostatic/hysteretic control. This is a receding horizon approach. Capability of the proposed schemes has also been investigated.

  3. Design of demand side response model in energy internet demonstration park

    Science.gov (United States)

    Zhang, Q.; Liu, D. N.

    2017-08-01

    The implementation of demand side response can bring a lot of benefits to the power system, users and society, but there are still many problems in the actual operation. Firstly, this paper analyses the current situation and problems of demand side response. On this basis, this paper analyses the advantages of implementing demand side response in the energy Internet demonstration park. Finally, the paper designs three kinds of feasible demand side response modes in the energy Internet demonstration park.

  4. Prediction-based manufacturing center self-adaptive demand side energy optimization in cyber physical systems

    Science.gov (United States)

    Sun, Xinyao; Wang, Xue; Wu, Jiangwei; Liu, Youda

    2014-05-01

    Cyber physical systems(CPS) recently emerge as a new technology which can provide promising approaches to demand side management(DSM), an important capability in industrial power systems. Meanwhile, the manufacturing center is a typical industrial power subsystem with dozens of high energy consumption devices which have complex physical dynamics. DSM, integrated with CPS, is an effective methodology for solving energy optimization problems in manufacturing center. This paper presents a prediction-based manufacturing center self-adaptive energy optimization method for demand side management in cyber physical systems. To gain prior knowledge of DSM operating results, a sparse Bayesian learning based componential forecasting method is introduced to predict 24-hour electric load levels for specific industrial areas in China. From this data, a pricing strategy is designed based on short-term load forecasting results. To minimize total energy costs while guaranteeing manufacturing center service quality, an adaptive demand side energy optimization algorithm is presented. The proposed scheme is tested in a machining center energy optimization experiment. An AMI sensing system is then used to measure the demand side energy consumption of the manufacturing center. Based on the data collected from the sensing system, the load prediction-based energy optimization scheme is implemented. By employing both the PSO and the CPSO method, the problem of DSM in the manufacturing center is solved. The results of the experiment show the self-adaptive CPSO energy optimization method enhances optimization by 5% compared with the traditional PSO optimization method.

  5. Summary of Characteristics and Energy Efficiency Demand-side Management Programs in the Southeastern United States

    Energy Technology Data Exchange (ETDEWEB)

    Glatt, Sandy [BCS Inc., Laurel, MD (United States)

    2010-04-01

    This report is the first in a series that seeks to characterize energy supply and industrial sector energy consumption, and summarize successful industrial demand-side management (DSM) programs within each of the eight North American Electric Reliability Corporation (NERC) regions.

  6. Co-optimization of Energy and Demand-Side Reserves in Day-Ahead Electricity Markets

    Science.gov (United States)

    Surender Reddy, S.; Abhyankar, A. R.; Bijwe, P. R.

    2015-04-01

    This paper presents a new multi-objective day-ahead market clearing (DAMC) mechanism with demand-side reserves/demand response (DR) offers, considering realistic voltage-dependent load modeling. The paper proposes objectives such as social welfare maximization (SWM) including demand-side reserves, and load served error (LSE) minimization. In this paper, energy and demand-side reserves are cleared simultaneously through co-optimization process. The paper clearly brings out the unsuitability of conventional SWM for DAMC in the presence of voltage-dependent loads, due to reduction of load served (LS). Under such circumstances multi-objective DAMC with DR offers is essential. Multi-objective Strength Pareto Evolutionary Algorithm 2+ (SPEA 2+) has been used to solve the optimization problem. The effectiveness of the proposed scheme is confirmed with results obtained from IEEE 30 bus system.

  7. Distributed Demand Side Management with Battery Storage for Smart Home Energy Scheduling

    Directory of Open Access Journals (Sweden)

    Omowunmi Mary Longe

    2017-01-01

    Full Text Available The role of Demand Side Management (DSM with Distributed Energy Storage (DES has been gaining attention in recent studies due to the impact of the latter on energy management in the smart grid. In this work, an Energy Scheduling and Distributed Storage (ESDS algorithm is proposed to be installed into the smart meters of Time-of-Use (TOU pricing consumers possessing in-home energy storage devices. Source of energy supply to the smart home appliances was optimized between the utility grid and the DES device depending on energy tariff and consumer demand satisfaction information. This is to minimize consumer energy expenditure and maximize demand satisfaction simultaneously. The ESDS algorithm was found to offer consumer-friendly and utility-friendly enhancements to the DSM program such as energy, financial, and investment savings, reduced/eliminated consumer dissatisfaction even at peak periods, Peak-to-Average-Ratio (PAR demand reduction, grid energy sustainability, socio-economic benefits, and other associated benefits such as environmental-friendliness.

  8. An Integrated Decentralized Energy Planning Model considering Demand-Side Management and Environmental Measures

    Directory of Open Access Journals (Sweden)

    Seyed Mahmood Kazemi

    2013-01-01

    Full Text Available Decentralized energy planning (DEP is looked upon as an indisputable opportunity for energy planning of villages, isolated islands, and far spots. Nonetheless, at this decentralized planning level, the value of demand-side resources is not fairly examined, despite enjoying great advantages. Therefore, the core task of this study is to integrate demand-side resources, as a competing solution against supply-side alternatives, with decentralized energy planning decisions and demonstrate the rewarding role it plays. Moreover, sustainability indicators (SIs are incorporated into DEP attempts in order to attain sustainable development. It is emphasized that unless these indicators are considered at lower energy planning levels, they will be ignored at higher planning levels as well. Hence, to the best knowledge of the authors, this study for the first time takes into account greenhouse gas (GHG emissions produced by utilization of renewable energies in DEP optimization models. To address the issues mentioned previously, multiobjective linear programming model along with a min-max goal programming approach is employed. Finally, using data taken from the literature, the model is solved, and the obtained results are discussed. The results show that DSM policies have remarkably contributed to significant improvements especially in terms of environmental indicators.

  9. Public perceptions of demand-side management and a smarter energy future

    Science.gov (United States)

    Spence, Alexa; Demski, Christina; Butler, Catherine; Parkhill, Karen; Pidgeon, Nick

    2015-06-01

    Demand-side management (DSM) is a key aspect of many future energy system scenarios. DSM refers to a range of technologies and interventions designed to create greater efficiency and flexibility on the demand-side of the energy system. Examples include the provision of more information to users to support efficient behaviour and new `smart’ technologies that can be automatically controlled. Key stated outcomes of implementing DSM are benefits for consumers, such as cost savings and greater control over energy use. Here, we use results from an online survey to examine public perceptions and acceptability of a range of current DSM possibilities in a representative sample of the British population (N = 2,441). We show that, although cost is likely to be a significant reason for many people to take up DSM measures, those concerned about energy costs are actually less likely to accept DSM. Notably, individuals concerned about climate change are more likely to be accepting. A significant proportion of people, particularly those concerned about affordability, indicated unwillingness or concerns about sharing energy data, a necessity for many forms of DSM. We conclude substantial public engagement and further policy development is required for widespread DSM implementation.

  10. Energy Demand

    NARCIS (Netherlands)

    Stehfest, E. et al.

    2014-01-01

    Key policy issues – How will energy demand evolve particularly in emerging and medium- and low- income economies? – What is the mix of end-use energy carriers to meet future energy demand? – How can energy efficiency contribute to reducing the growth rate of energy demand and mitigate pressures on t

  11. Integrated design and evaluation of biomass energy system taking into consideration demand side characteristics

    Energy Technology Data Exchange (ETDEWEB)

    Ren, Hongbo [Ritsumeikan Global Innovation Research Organization, Ritsumeikan University, 56-1 Toji-in Kitamachi, Kita-Ku, 603-8577 Kyoto (Japan); Zhou, Weisheng; Nakagami, Ken' ichi [College of Policy Sciences, Ritsumeikan University, 603-8577 Kyoto (Japan); Gao, Weijun [Faculty of Environmental Engineering, The University of Kitakyushu, 808-0135 Kitakyushu (Japan)

    2010-05-15

    In this paper, a linear programming model has been developed for the design and evaluation of biomass energy system, while taking into consideration demand side characteristics. The objective function to be minimized is the total annual cost of the energy system for a given customer equipped with a biomass combined cooling, heating and power (CCHP) plant, as well as a backup boiler fueled by city gas. The results obtained from the implementation of the model demonstrate the optimal system capacities that customers could employ given their electrical and thermal demands. As an illustrative example, an investigation addresses the optimal biomass CCHP system for a residential area located in Kitakyushu Science and Research Park, Japan. In addition, sensitivity analyses have been elaborated in order to show how the optimal solutions would vary due to changes of some key parameters including electricity and city gas tariffs, biogas price, electricity buy-back price, as well as carbon tax rate. (author)

  12. Increased demand-side flexibility: market effects and impacts on variable renewable energy integration

    Directory of Open Access Journals (Sweden)

    Åsa Grytli Tveten

    2016-12-01

    Full Text Available This paper investigates the effect of increased demand-side flexibility (DSF on integration and market value of variable renewable energy sources (VRE. Using assumed potentials, system-optimal within-day shifts in demand are investigated for the Northern European power markets in 2030, applying a comprehensive partial equilibrium model with high temporal and spatial resolution. Increased DSF is found to cause only a minor (less than 3% reduction in consumers’ cost of electricity. VRE revenues are found to increase (up to 5% and 2% for wind and solar power, respectively, and total VRE curtailment decreases by up to 7.2 TWh. Increased DSF causes only limited reductions in GHG emissions. The emission reduction is, however, sensitive to underlying assumptions. We conclude that increased DSF is a promising measure for improving VRE integration. However, low consumers’ savings imply that policies stimulating DFS will be needed to fully use the potential benefits of DSF for VRE integration

  13. Hawaii Energy Strategy: Program guide. [Contains special sections on analytical energy forecasting, renewable energy resource assessment, demand-side energy management, energy vulnerability assessment, and energy strategy integration

    Energy Technology Data Exchange (ETDEWEB)

    1992-09-01

    The Hawaii Energy Strategy program, or HES, is a set of seven projects which will produce an integrated energy strategy for the State of Hawaii. It will include a comprehensive energy vulnerability assessment with recommended courses of action to decrease Hawaii's energy vulnerability and to better prepare for an effective response to any energy emergency or supply disruption. The seven projects are designed to increase understanding of Hawaii's energy situation and to produce recommendations to achieve the State energy objectives of: Dependable, efficient, and economical state-wide energy systems capable of supporting the needs of the people, and increased energy self-sufficiency. The seven projects under the Hawaii Energy Strategy program include: Project 1: Develop Analytical Energy Forecasting Model for the State of Hawaii. Project 2: Fossil Energy Review and Analysis. Project 3: Renewable Energy Resource Assessment and Development Program. Project 4: Demand-Side Management Program. Project 5: Transportation Energy Strategy. Project 6: Energy Vulnerability Assessment Report and Contingency Planning. Project 7: Energy Strategy Integration and Evaluation System.

  14. Demand Side Bidding. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Spahn, Andrew

    2003-12-31

    This document sets forth the final report for a financial assistance award for the National Association of Regulatory Utility Commissioners (NARUC) to enhance coordination between the building operators and power system operators in terms of demand-side responses to Location Based Marginal Pricing (LBMP). Potential benefits of this project include improved power system reliability, enhanced environmental quality, mitigation of high locational prices within congested areas, and the reduction of market barriers for demand-side market participants. NARUC, led by its Committee on Energy Resources and the Environment (ERE), actively works to promote the development and use of energy efficiency and clean distributive energy policies within the framework of a dynamic regulatory environment. Electric industry restructuring, energy shortages in California, and energy market transformation intensifies the need for reliable information and strategies regarding electric reliability policy and practice. NARUC promotes clean distributive generation and increased energy efficiency in the context of the energy sector restructuring process. NARUC, through ERE's Subcommittee on Energy Efficiency, strives to improve energy efficiency by creating working markets. Market transformation seeks opportunities where small amounts of investment can create sustainable markets for more efficient products, services, and design practices.

  15. Energy Refurbishment of an Office Building with Hybrid Photovoltaic System and Demand-Side Management

    Directory of Open Access Journals (Sweden)

    Giovani Almeida Dávi

    2017-08-01

    Full Text Available On-site photovoltaic (PV and battery systems intend to improve buildings energy performance, however battery costs and monetary incentives are a major drawback for the introduction of these technologies into the electricity grids. This paper proposes an energy refurbishment of an office building based on multi-objective simulations. An innovative demand-side management approach is analyzed through the PV and battery control with the purpose of reducing grid power peaks and grid imported energy, as well as improving the project economy. Optimization results of load matching and grid interaction parameters, complemented with an economic analysis, are investigated in different scenarios. By means of battery use, the equivalent use of the grid connection is reduced by 12%, enhancing the grid interaction potential, and 10% of load matching rates can be increased. Project improvements indicate the grid connection capacity can be reduced by 13% and significant savings of up to 48% are achieved on yearly bills. The economy demonstrates the grid parity is only achieved for battery costs below 100 €/kWh and the payback period is large: 28 years. In the case with only PV system, the grid parity achieves better outcomes and the payback time is reduced by a half, making this a more attractive option.

  16. Global energy efficiency improvement in the log term: a demand- and supply-side perspective

    OpenAIRE

    Graus, W.H.J.; Blomen, E.; Worrell, E.

    2011-01-01

    This study assessed technical potentials for energy efficiency improvement in 2050 in a global context. The reference scenario is based on the World Energy Outlook of the International Energy Agency 2007 edition and assumptions regarding gross domestic product developments after 2030. In the reference scenario, worldwide final energy demand almost doubles from 293 EJ in 2005 to 571 EJ in 2050 and primary energy supply increases from 439 EJ in 2005 to 867 EJ in 2050 (excluding non-energy use)....

  17. Energy Demand-Side Management: New Perspectives for a New Era

    Science.gov (United States)

    Carley, Sanya

    2012-01-01

    Over the past decade and a half, state governments have assumed greater responsibility over demand-side management (DSM) operations. Whereas DSM programs formerly were initiated primarily by utilities or state public utility commissions, they are now becoming increasingly state-initiated and incentivized through funding mechanisms or…

  18. Implementation of Demand Side Flexibility from the perspective of Europe’s Energy Directives

    DEFF Research Database (Denmark)

    Edelenbos, Edwin; Togeby, Mikael; Wittchen, Kim Bjarne

    2015-01-01

    Demand Side Flexibility (DSF) is the capacity to change electricity usage by end-users from their normal or current consumption patterns in response to changes in the price of electricity over time, or to incentive payments. These price changes or incentives can be grid related and market related...

  19. Distributed demand-side management optimisation for multi-residential users with energy production and storage strategies

    Directory of Open Access Journals (Sweden)

    Emmanuel Chifuel Manasseh

    2014-12-01

    Full Text Available This study considers load control in a multi-residential setup where energy scheduler (ES devices installed in smart meters are employed for demand-side management (DSM. Several residential end-users share the same energy source and each residential user has non-adjustable loads and adjustable loads. In addition, residential users may have storage devices and renewable energy sources such as wind turbines or solar as well as dispatchable generators. The ES devices exchange information automatically by executing an iterative distributed algorithm to locate the optimal energy schedule for each end-user. This will reduce the total energy cost and the peak-to-average ratio (PAR in energy demand in the electric power distribution. Users possessing storage devices and dispatchable generators strategically utilise their resources to minimise the total energy cost together with the PAR. Simulation results are provided to evaluate the performance of the proposed game theoretic-based distributed DSM technique.

  20. A Novel Prosumer-Based Energy Sharing and Management (PESM Approach for Cooperative Demand Side Management (DSM in Smart Grid

    Directory of Open Access Journals (Sweden)

    Sohail Razzaq

    2016-10-01

    Full Text Available Increasing population and modern lifestyle have raised energy demands globally. Demand Side Management (DSM is one important tool used to manage energy demands. It employs an advanced power infrastructure along with bi-directional information flow among utilities and users in order to achieve a balanced load curve and minimize demand-supply mismatch. Traditionally, this involves shifting the electricity demand from peak hours to other times of the day in an optimized manner. Multiple users equipped with renewable resources work in coordination with each other in order to achieve mutually beneficial energy management. This, in turn, has generated the concept of cooperative DSM. Such users, called prosumers, consume and produce energy using renewable resources (solar, wind etc.. Prosumers with surplus energy sell to the grid as well as to other consumers. In this paper, a novel Prosumer-based Energy Sharing and Management (PESM scheme for cooperative DSM has been proposed. A simulation model has been developed for testing the proposed method. Different variations of the proposed methodology have been experimented with different criteria. The results show that the proposed energy sharing scheme achieves DSM purposes in a useful manner.

  1. Local government involvement in long term resource planning for community energy systems. Demand side management

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    A program was developed to coordinate governmental, research, utility, and business energy savings efforts, and to evaluate future potential actions, based on actual field data obtained during the implementation of Phase I of the State Resource Plan. This has lead to the establishment of a state conservation and energy efficiency fund for the purpose of establishing a DSM Program. By taking a state wide perspective on resource planning, additional savings, including environmental benefits, can be achieved through further conservation and demand management. This effort has already blossomed into a state directive for DSM programs for the natural gas industry.

  2. An Economic Evalution of Demand-side Energy Storage Systems by using a Multi-agent based Electricity Market

    Science.gov (United States)

    Furusawa, Ken; Sugihara, Hideharu; Tsuji, Kiichiro

    Opened wholesale electric power market in April 2005, deregulation of electric power industry in Japan has faced a new competitive environment. In the new environment, Independent Power Producer (: IPP), Power Producer and Supplier (: PPS), Load Service Entity (: LSE) and electric utility can trade electric energy through both bilateral contracts and single-price auction at the electricity market. In general, the market clearing price (: MCP) is largely changed by amount of total load demand in the market. The influence may cause price spike, and consequently the volatility of MCP will make LSEs and their customers to face a risk of revenue and cost. DSM is attracted as a means of load leveling, and has effect on decreasing MCP at peak load period. Introducing Energy Storage systems (: ES) is one of DSM in order to change demand profile at customer-side. In case that customers decrease their own demand at jumped MCP, a bidding strategy of generating companies may be changed their strategy. As a result, MCP is changed through such complex mechanism. In this paper the authors evaluate MCP by multi-agent. It is considered that customer-side ES has an effect on MCP fluctuation. Through numerical examples, this paper evaluates the influence on MCP by controlling customer-side ES corresponding to variation of MCP.

  3. Operation of Battery Energy Storage System in Demand Side using Local Load Forecasting

    Science.gov (United States)

    Hida, Yusuke; Yokoyama, Ryuichi; Shimizukawa, Jun; Iba, Kenji; Tanaka, Kouji; Seki, Tomomichi

    Recently, the various political movements, which reduce CO2-emission, have been proposed against global warming. Therefore, battery energy storage systems (BESSs) such as NAS (sodium and sulfur) battery are attracting attention around the world. The first purpose of BESS was the improvement of load factors. The second purpose is the improvement of power quality, especially against voltage-sag. The recent interest is oriented to utilize BESS to mitigate the intermittency of renewable energy. NAS battery has two operation modes. The first one is a fixed pattern operation, which is time-schedule in advance. The second mode is the load following operation. Although this mode can perform more the flexible operation by adjusting the change of load, it has the risks of shortage/surplus of battery energy. In this paper, an accurate demand forecasting method, which is based on multiple regression models, is proposed. Using this load forecasting, the more advanced control of load following operation for NAS battery is proposed.

  4. Communication technologies for demand side management

    Energy Technology Data Exchange (ETDEWEB)

    Uuspaeae, P. [VTT Energy, Espoo (Finland)

    1998-08-01

    The scope of this research is data communications for electric utilities, specifically for the purposes of Demand Side Management (DSM). Demand Side Management has the objective to change the customer`s end use of energy in a manner that benefits both the customer and the utility. For example, peak demand may be reduced, and the peak demand may be relocated to off peak periods. Thus additional investments in generation and network may be avoided. A number of Demand Side Management functions can be implemented if a communication system is available between the Electric Utility and the Customer. The total communication capacity that is needed, will depend on several factors, such as the functions that are chosen for DSM, and on the number and type of customers. Some functions may be handled with one-way communications, while some other functions need to have two-way communication

  5. Lessons learned from new construction utility demand side management programs and their implications for implementing building energy codes

    Energy Technology Data Exchange (ETDEWEB)

    Wise, B.K.; Hughes, K.R.; Danko, S.L.; Gilbride, T.L.

    1994-07-01

    This report was prepared for the US Department of Energy (DOE) Office of Codes and Standards by the Pacific Northwest Laboratory (PNL) through its Building Energy Standards Program (BESP). The purpose of this task was to identify demand-side management (DSM) strategies for new construction that utilities have adopted or developed to promote energy-efficient design and construction. PNL conducted a survey of utilities and used the information gathered to extrapolate lessons learned and to identify evolving trends in utility new-construction DSM programs. The ultimate goal of the task is to identify opportunities where states might work collaboratively with utilities to promote the adoption, implementation, and enforcement of energy-efficient building energy codes.

  6. Impact of Demand-Side Management on Thermal Comfort and Energy Costs in a Residential nZEB

    Directory of Open Access Journals (Sweden)

    Thibault Q. Péan

    2017-05-01

    Full Text Available In this study, simulation work has been carried out to investigate the impact of a demand-side management control strategy in a residential nZEB. A refurbished apartment within a multi-family dwelling representative of Mediterranean building habits was chosen as a study case and modelled within a simulation framework. A flexibility strategy based on set-point modulation depending on the energy price was applied to the building. The impact of the control strategy on thermal comfort was studied in detail with several methods retrieved from the standards or other literature, differentiating the effects on day and night living zones. It revealed a slight decrease of comfort when implementing flexibility, although this was not prejudicial. In addition, the applied strategy caused a simultaneous increase of the electricity used for heating by up to 7% and a reduction of the corresponding energy costs by up to around 20%. The proposed control thereby constitutes a promising solution for shifting heating loads towards periods of lower prices and is able to provide benefits for both the user and the grid sides. Beyond that, the activation of energy flexibility in buildings (nZEB in the present case will participate in a more successful integration of renewable energy sources (RES in the energy mix.

  7. Global energy efficiency improvement in the log term: a demand- and supply-side perspective

    NARCIS (Netherlands)

    Graus, W.H.J.; Blomen, E.; Worrell, E.

    2011-01-01

    This study assessed technical potentials for energy efficiency improvement in 2050 in a global context. The reference scenario is based on the World Energy Outlook of the International Energy Agency 2007 edition and assumptions regarding gross domestic product developments after 2030. In the referen

  8. The Role of Demand Side in the Transition to a Sustainable Energy System

    DEFF Research Database (Denmark)

    Nørgaard, Jørgen

    1997-01-01

    It is suggested in this paper that radical reduction in energy consumption is a precondition for reaching a sustainable development. This is the case, also in a country like Norway blessed with energy resources, for environmental, economic, and moral reasons. First is presented an overview...

  9. Balancing Renewable Electricity Energy Storage, Demand Side Management, and Network Extension from an Interdisciplinary Perspective

    CERN Document Server

    Droste-Franke, Bert; Rehtanz, Christian; Sauer, Dirk Uwe; Schneider, Jens-Peter; Schreurs, Miranda; Ziesemer, Thomas

    2012-01-01

    A significant problem of integrating renewable energies into the electricity system is the temporally fluctuating energy production by wind and solar power plants. Thus, in order to meet the ambitious long-term targets on CO2 emission reduction, long-term viable low-carbon options for balancing electricity will be needed. This interdisciplinary study analyses published future energy scenarios in order to get an impression of the required balancing capacities and shows which framework conditions should be modified to support their realisation. The authors combine their perspectives from energy engineering, technology assessment, political science, economical science and jurisprudence and address science, politics, actors in the energy sector and the interested public. Respectively, requirements for the balancing systems are analysed, considering the case of Germany as a large country with high ambitions to reduce greenhouse gas emissions. Additionally, an approach to investigate the optimal design of the techn...

  10. Balancing renewable electricity. Energy storage, demand side management, and network extension from an interdisciplinary perspective

    Energy Technology Data Exchange (ETDEWEB)

    Droste-Franke, Bert [Europaeische Akademie zur Erforschung von Folgen Wissenschaftlich-Technischer Entwicklungen GmbH, Bad Neuenahr-Ahrweiler (Germany); Paal, Boris P.; Rehtanz, Christian; Sauer, Dirk Uwe; Schneider, Jens-Peter; Schreurs, Miranda; Ziesemer, Thomas

    2012-07-01

    A significant problem of integrating renewable energies into the electricity system is the temporally fluctuating energy production by wind and solar power plants. Thus, in order to meet the ambitious long-term targets on CO{sub 2} emission reduction, long-term viable low-carbon options for balancing electricity will be needed. This interdisciplinary study analyses published future energy scenarios in order to get an impression of the required balancing capacities and shows which framework conditions should be modified to support their realisation. The authors combine their perspectives from energy engineering, technology assessment, political science, economical science and jurisprudence and address science, politics, actors in the energy sector and the interested public. Respectively, requirements for the balancing systems are analysed, considering the case of Germany as a large country with high ambitions to reduce greenhouse gas emissions. Additionally, an approach to investigate the optimal design of the technical system for balancing electricity over Europe is sketched. Looking at the challenges of a future energy system a mix of complementary technologies will prospectively become prevalent. In order to foster the needed innovation processes adequately, several funding mechanisms and legal regulations should be adapted. The authors give recommendations to handle major challenges in the development of the technical infrastructure, for the design of market conditions and for specific support of the application of balancing technologies. (orig.)

  11. Demand Side Management Using the Internet of Energy Based on LoRaWAN Technology

    DEFF Research Database (Denmark)

    Shahryari, Kolsoom; Anvari-Moghaddam, Amjad; Shahryari, Shadi

    2017-01-01

    The smart grid, as a communication network, allows numerous connected devices such as sensors, relays and actuators to interact and cooperate with each other. An Internet-based solution for electricity that provides bidirectional flow of information and power is internet of energy (IoE) which...

  12. Demand Side Management Using the Internet of Energy based on Fog and Cloud Computing

    DEFF Research Database (Denmark)

    Shahryari, Kolsoom; Anvari-Moghaddam, Amjad

    2017-01-01

    The smart grid, as a communication network, allows numerous connected devices such as sensors, relays and actuators to interact and cooperate with each other. An Internet-based solution for electricity that provides bidirectional flow of information and power is internet of energy (IoE) which...

  13. Towards a demand-side smart domestic electrical energy management system

    CSIR Research Space (South Africa)

    Dlodlo, N

    2013-01-01

    Full Text Available technologies such as the smart phone, cloud, wireless, web server and motes. The research analyses literature on existing smart home energy systems and technologies and draws lessons from the analysis on how the proposed architecture should be structured. When...

  14. Maximizing Energy Savings Reliability in BC Hydro Industrial Demand-side Management Programs: An Assessment of Performance Incentive Models

    Science.gov (United States)

    Gosman, Nathaniel

    For energy utilities faced with expanded jurisdictional energy efficiency requirements and pursuing demand-side management (DSM) incentive programs in the large industrial sector, performance incentive programs can be an effective means to maximize the reliability of planned energy savings. Performance incentive programs balance the objectives of high participation rates with persistent energy savings by: (1) providing financial incentives and resources to minimize constraints to investment in energy efficiency, and (2) requiring that incentive payments be dependent on measured energy savings over time. As BC Hydro increases its DSM initiatives to meet the Clean Energy Act objective to reduce at least 66 per cent of new electricity demand with DSM by 2020, the utility is faced with a higher level of DSM risk, or uncertainties that impact the costeffective acquisition of planned energy savings. For industrial DSM incentive programs, DSM risk can be broken down into project development and project performance risks. Development risk represents the project ramp-up phase and is the risk that planned energy savings do not materialize due to low customer response to program incentives. Performance risk represents the operational phase and is the risk that planned energy savings do not persist over the effective measure life. DSM project development and performance risks are, in turn, a result of industrial economic, technological and organizational conditions, or DSM risk factors. In the BC large industrial sector, and characteristic of large industrial sectors in general, these DSM risk factors include: (1) capital constraints to investment in energy efficiency, (2) commodity price volatility, (3) limited internal staffing resources to deploy towards energy efficiency, (4) variable load, process-based energy saving potential, and (5) a lack of organizational awareness of an operation's energy efficiency over time (energy performance). This research assessed the capacity

  15. Methodology for the analysis and characterization of the demand side energy resources; Metodologia para analise e caracterizacao dos recursos energeticos do lado da demanda

    Energy Technology Data Exchange (ETDEWEB)

    Baitelo, Ricardo Lacerda; Udaeta, Miguel Edgar Morales [Universidade de Sao Paulo (USP), SP (Brazil). Dept. de Energia e Automacao Eletricas. Grupo de Energia; Burani, Geraldo Francisco; Grimoni, Jose Aquiles Baesso [Universidade de Sao Paulo (USP), SP (Brazil). Inst. de Energia e Eletrotecnica

    2006-07-01

    This abstract aims at describing briefly a model for the assessment of demand side energy resources This model intends to comprehend every kind of action and measure related to demand side management and energy conservation, evaluating them in a holistic way, into four dimensions: technical-economical, environmental, social and political. Different aspects regarding the resources are also accounted, such as energetic potentials (theoretical, accomplishable and economic). At last, scenarios concerning the introduction of evaluated resources through a period of time are elaborated. (author)

  16. Industrial demand side management status report - synopsis

    Energy Technology Data Exchange (ETDEWEB)

    Hopkins, M.E.F.; Conger, R.L.; Foley, T.J. [and others

    1996-05-01

    Industrial demand side management (DSM) programs, though not as developed or widely implemented as residential and commercial programs, hold the promise of significant energy savings-savings that will benefit industrial firms, utilities and the environment. This paper is a synopsis of a larger research report, Industrial Demand Side Management: A Status Report, prepared for the U.S. Department of Energy. The report provides an overview of and rationale for DSM programs. Benefits and barriers are described, and data from the Manufacturing Energy Consumption Survey are used to estimate potential electricity savings from industrial energy efficiency measures. Overcoming difficulties to effective program implementation is worthwhile, since rough estimates indicate a substantial potential for electricity savings. The report categorizes types of DSM programs, presents several examples of each type, and explores elements of successful programs. Two in-depth case studies (of Boise Cascade and of Eli Lilly and Company) illustrate two types of effective DSM programs. Interviews with staff from state public utility commissions indicate the current thinking about the status and future of industrial DSM programs. Finally, the research report also includes a comprehensive bibliography, a description of technical assistance programs, and an example of a methodology for evaluating potential or actual savings from projects.

  17. Industrial demand side management status report: Synopsis

    Energy Technology Data Exchange (ETDEWEB)

    Hopkins, M.E.F.; Conger, R.L.; Foley, T.J.; Parker, J.W.; Placet, M.; Sandahl, L.J.; Spanner, G.E.; Woodruff, M.G.; Norland, D.

    1995-08-01

    Industrial demand side management (DSM) programs, though not as developed or widely implemented as residential and commercial programs, hold the promise of significant energy savings-savings that will benefit industrial firms, utilities and the environment. This paper is a synopsis of a larger research report, Industrial Demand Side Management. A Status Report, prepared for the US Department of Energy. The report provides an overview of and rationale for DSM programs. Benefits and barriers are described, and data from the Manufacturing Energy Consumption Survey are used to estimate potential electricity savings from industrial energy efficiency measures. Overcoming difficulties to effective program implementation is worthwhile, since rough estimates indicate a substantial potential for electricity savings. The report categorizes types of DSM programs, presents several examples of each type, and explores elements of successful programs. Two in-depth case studies (of Boise Cascade and of Eli Lilly and Company) illustrate two types of effective DSM programs. Interviews with staff from state public utility commissions indicate the current thinking about the status and future of industrial DSM programs. Finally, the research report also includes a comprehensive bibliography, a description of technical assistance programs, and an example of a methodology for evaluating potential or actual savings from projects.

  18. Impacts of Western Area Power Administration`s power marketing alternatives on utility demand-side management and conservation and renewable energy programs

    Energy Technology Data Exchange (ETDEWEB)

    Cavallo, J.D.; Germer, M.F.; Tompkins, M.M.

    1995-03-01

    The Western Area Power Administration (Western) requires all of its long-term firm power customers to implement programs that promote the conservation of electric energy or facilitate the use of renewable energy resources. Western has also proposed that all customers develop integrated resource plans that include cost-effective demand-side management programs. As part of the preparation of Western`s Electric Power Marketing Environmental Impact Statement, Argonne National Laboratory (ANL) developed estimates of the reductions in energy demand resulting from Western`s conservation and renewable energy activities in its Salt Lake City Area Office. ANL has also estimated the energy-demand reductions from cost-effective, demand-side management programs that could be included in the integrated resource plans of the customers served by Western`s Salt Lake City Area Office. The results of this study have been used to adjust the expected hourly demand for Western`s major systems in the Salt Lake City Area. The expected hourly demand served as the basis for capacity expansion plans develops with ANL`s Production and Capacity Expansion (PACE) model.

  19. Disruptive innovation: the demand side.

    Science.gov (United States)

    Havighurst, Clark C

    2008-01-01

    The notion of disruptive innovation provides a welcome framework for considering the prospects for low-cost alternatives in American medicine. Such innovations as have been seen, however, are largely the result of demand by patients paying their own bills because they have high-deductible coverage or are uninsured. Many other cost-saving innovations are discouraged by financing systems that are themselves largely immune to competition from disruptive innovators.

  20. Deliverable 5 of Changing Behaviour. Interaction Schemes for Successful Energy Demand Side Management. Building blocks for a practicable and conceptual framework

    Energy Technology Data Exchange (ETDEWEB)

    Mourik, R.M.; Feenstra, C.F.J. [ECN Policy Studies, Petten (Netherlands); Heiskanen, E.; Rask, M.; Saastamoinen, M.; Johnson, M. [National Consumer Research Centre NCRC, Helsinki (Finland); Barabanova, Y.; Pariag, J. [Central European University CEU, Budapest (Hungary); Bauknecht, D.; Brohmann, B.; Buerger, V. [Institute for Applied Ecology OEKO, Freiburg (Germany); Hodson, M.; Marvin, S. [The SURF Centre, University of Salford, Manchester (United Kingdom); Jalas, M.; Rinne, S.; Salminnen, J. [Enespa Ltd. (Finland); Maier, P.; Meinel, H. [Verbraucherzentrale Nordrhein-Westfalen e.V. VZ NRW, Duesseldorf (Germany); Robinson, S. [Manchester Knowledge Capital MKC, Manchester Enterprises ME, Manchester (United Kingdom); Valuntiene, I. [Cowi Baltic, Vilnius (Lithuania); Vadovics, E. [GreenDependent Sustainable Solutions Association, Magyarorszag (Hungary)

    2009-10-15

    Changing Behaviour is a project that aims to support change in energy use and energy services by applying social research on technological change to practical use. The focus is on the interaction between energy experts and energy users: How can these different groups learn to understand each other better. D5 presents the comprehensive body of knowledge from theoretical inquiry into relevant social scientific literature; an in depth meta- analysis of 27 energy demand-side management case studies and workshops with external practitioners from various European countries. Particular attention is awarded to the importance of interactions between intermediary practitioners and end users.

  1. Industrial demand side management: A status report

    Energy Technology Data Exchange (ETDEWEB)

    Hopkins, M.F.; Conger, R.L.; Foley, T.J. [and others

    1995-05-01

    This report provides an overview of and rationale for industrial demand side management (DSM) programs. Benefits and barriers are described, and data from the Manufacturing Energy Consumption Survey are used to estimate potential energy savings in kilowatt hours. The report presents types and examples of programs and explores elements of successful programs. Two in-depth case studies (from Boise Cascade and Eli Lilly and Company) illustrate two types of effective DSM programs. Interviews with staff from state public utility commissions indicate the current thinking about the status and future of industrial DSM programs. A comprehensive bibliography is included, technical assistance programs are listed and described, and a methodology for evaluating potential or actual savings from projects is delineated.

  2. U.S. electric utility demand-side management 1993

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-07-01

    This report presents comprehensive information on electric power industry demand-side management activities in the United States at the national, regional, and utility levels. Data is included for energy savings, peakload reductions, and costs.

  3. U.S. electric utility demand-side management 1993

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-07-01

    This report presents comprehensive information on electric power industry demand-side management activities in the United States at the national, regional, and utility levels. Data is included for energy savings, peakload reductions, and costs.

  4. Distributed demand-side optimization in the smart grid

    OpenAIRE

    Atzeni, Italo

    2014-01-01

    The modern power grid is facing major challenges in the transition to a low-carbon energy sector. The growing energy demand and environmental concerns require carefully revisiting how electricity is generated, transmitted, and consumed, with an eye to the integration of renewable energy sources. The envisioned smart grid is expected to address such issues by introducing advanced information, control, and communication technologies into the energy infrastructure. In this context, demand-side m...

  5. Coordinating Demand-Side Efficiency Evaluation, Measurement and Verification Among Western States: Options for Documenting Energy and Non-Energy Impacts for the Power Sector

    Energy Technology Data Exchange (ETDEWEB)

    Schiller, Steven R. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Schwartz, Lisa C. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2016-06-22

    Demand-side energy efficiency (efficiency) represents a low-cost opportunity to reduce electricity consumption and demand and provide a wide range of non-energy benefits, including avoiding air pollution. Efficiency-related energy and non-energy impacts are determined and documented by implementing evaluation, measurement and verification (EM&V) systems. This technical brief describes efficiency EM&V coordination strategies that Western states can consider taking on together, outlines EM&V-related products that might be appropriate for multistate coordination, and identifies some implications of coordination. Coordinating efficiency EM&V activities can save both time and costs for state agencies and stakeholders engaged in efficiency activities and can be particularly beneficial for multiple states served by the same utility. First, the brief summarizes basic information on efficiency, its myriad potential benefits and EM&V for assessing those benefits. Second, the brief introduces the concept of multistate EM&V coordination in the context of assessing such benefits, including achievement of state and federal goals to reduce air pollutants.1 Next, the brief presents three coordination strategy options for efficiency EM&V: information clearinghouse/exchange, EM&V product development, and a regional energy efficiency tracking system platform. The brief then describes five regional EM&V products that could be developed on a multistate basis: EM&V reporting formats, database of consistent deemed electricity savings values, glossary of definitions and concepts, efficiency EM&V methodologies, and EM&V professional standards or accreditation processes. Finally, the brief discusses options for next steps that Western states can take to consider multistate coordination on efficiency EM&V. Appendices provide background information on efficiency and EM&V, as well as definitions and suggested resources on the covered topics. This brief is intended to inform state public

  6. 从需求侧管理谈高校节能减排%Demand Side Management on Reducing Greenhouse Gas Emissions and Energy Saving in University

    Institute of Scientific and Technical Information of China (English)

    刘纯江; 韩俊; 安丽娜

    2011-01-01

    随着高校办学规模日益扩大,能源紧缺现象经常发生.运用需求侧管理高校节能减排,是缓解高校供能紧张的有效方法.建设节约型校园,推动社会和谐发展.%As with the development of university, the energy shortage often occurs.Demand side management is an effective method of reducing greenhouse gas emission and energy saving in university.Constructing conserving campus helps promote social harmony.

  7. Research and Design of Demand Side Energy Efficiency Management and Demand Response System%电力需求侧能效管理与需求响应系统的研究与设计

    Institute of Scientific and Technical Information of China (English)

    闫华光; 陈宋宋; 钟鸣; 蒋利民

    2015-01-01

    为引导需求侧优化用能管理水平、参与电网高峰负荷削减,实现能源利用效率的整体提升,简述了电力需求侧能效管理与需求响应系统建设的背景、意义;概述了系统在监测用户能源消耗数据、控制用户关键用能系统或设备的运行状态、响应电网侧需求响应事件方面功能;提出了系统的层次结构并描述了各层之间的关系;详细设计了系统的物理架构、功能架构,并分析了系统关键技术。本设计方案已应用于国家电力需求侧管理平台、国家电网公司电能服务管理平台的研发建设,为国家电力需求侧管理工作提供了技术支撑。未来,将对为能效管理与需求响应业务在国内的推广实施奠定技术基础。%To guide the optimization of demand side energy utilization management level and to participate the peak load shaving of power grid to overall improve the energy utilization efficiency, both the background and the meaning of constructing the demand side energy efficiency management and demand response system are briefly explained; the functions of the demand side energy efficiency management and demand response system in following aspects such as monitoring user energy consumption data, controlling operating states of user’s key energy utilization system or devices, responding grid-side demand response event are summarized; the hierarchical structure of this system is proposed and the relationship among hierarchies are described; both physical architecture and functional structure of this system are designed in detail and key technologies of this system are analyzed. The design scheme presented in this paper has been applied in the development and construction of national power demand side management platform and electric energy service management platform of China State Power Grid Corp. to provide technical support for national electric power demand side management. In future, the

  8. Demand Side Management for Multiple Devices

    NARCIS (Netherlands)

    Molderink, Albert; Bakker, Vincent; Smit, Gerard J.M.

    2013-01-01

    Steering a heterogeneous set of devices in a Smart Grid using cost functions: Demand Side Management (DSM) is an important element in smart grids. DSM is already in operation for large consumers, but thorough research is required into DSM on a building level within the distribution grid.

  9. Integrated resource strategic planning and power demand-side management

    CERN Document Server

    Hu, Zhaoguang; Wen, Quan

    2013-01-01

    Integrated Resource Strategic Planning and Power Demand-Side Management elaborates two important methods - Integrated Resource Strategic Planning (IRSP) and Demand Side Management (DSM) - in terms of methodology modeling, case studies and lessons learned. This book introduces a prospective and realistic theory of the IRSP method and includes typical best practices of DSM for energy conservation and emission reduction in different countries. It can help energy providers and governmental decision-makers formulate policies and make plans for energy conservation and emission reduction, and can hel

  10. Intelligent energy demand forecasting

    CERN Document Server

    Hong, Wei-Chiang

    2013-01-01

    This book offers approaches and methods to calculate optimal electric energy allocation, using evolutionary algorithms and intelligent analytical tools to improve the accuracy of demand forecasting. Focuses on improving the drawbacks of existing algorithms.

  11. Demand-side management energy saving potential in commercial and governmental/institutional sectors and its impact on power planning : a case study of central grid of Oman

    Energy Technology Data Exchange (ETDEWEB)

    Malik, A.S.; Al-Khrousi, A.R.; Al-Hindi, M.; Al-Mahrouqi, Y. [Sultan Qaboos Univ., Al-Khod (Oman). College of Engineering

    2006-07-01

    The results of Demand-Side Management (DSM) energy saving potential in commercial, government and institutional sectors of Oman were presented along with an evaluation of its impact on generation capacity and energy savings. DSM was defined as electricity demand management by methods such as peak clipping, valley filling, load shifting, and strategic conservation. Peak clipping reduces electricity demand during on-peak periods of the day, thus lowering the peak demand that utilities must meet. In contrast, valley filling increases the electrical load during off-peak periods. Load shifting refers to the movement of loads from peak periods to off-peak periods without any shift in energy use. Strategic load growth aims to increase the load in the future, while strategic conservation aims to decrease the load in the future without any shift in demand to another time. The purpose of DSM is to influence the amount or timing of customers' energy use. It has a positive environmental outlook and provides the best solution between load growth and increasing constraints on new and existing generation, transmission and distribution capacity. Resource options for DSM include energy efficiency options, such as energy efficient appliances, lighting, high efficiency heating, ventilating and air conditioning. Other options include load management and tariffs such as time-of-use incentives. The goal of electricity planning is to meet the load forecast with high reliability at a minimum cost. DSM economic energy savings potential is worked out from both the customer point of view and the electric utility's point of view. The study showed that the use of DSM in commercial and government sectors is economically justified from the customer point of view. DSM programs in the government and commercial sectors reduced the energy consumption to 21 and 38 per cent respectively. The discounted payback period of investment in efficient lighting and air-conditioning was between 4

  12. U.S. electric utility demand-side management 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-01-01

    The US Electric Utility Demand-Side Management report is prepared by the Coal and Electric Data and Renewables Division; Office of Coal, Nuclear, Electric and Alternative Fuels; Energy Information Administration (EIA); US Department of Energy. The report presents comprehensive information on electric power industry demand-side management (DSM) activities in the US at the national, regional, and utility levels. The objective of the publication is to provide industry decision makers, government policy makers, analysts, and the general public with historical data that may be used in understanding DSM as it relates to the US electric power industry. The first chapter, ``Profile: US Electric Utility Demand-Side Management``, presents a general discussion of DSM, its history, current issues, and a review of key statistics for the year. Subsequent chapters present discussions and more detailed data on energy savings, peak load reductions and costs attributable to DSM. 9 figs., 24 tabs.

  13. Implementation and Control of a Residential Electrothermal Microgrid Based on Renewable Energies, a Hybrid Storage System and Demand Side Management

    Directory of Open Access Journals (Sweden)

    Julio Pascual

    2014-01-01

    Full Text Available This paper proposes an energy management strategy for a residential electrothermal microgrid, based on renewable energy sources. While grid connected, it makes use of a hybrid electrothermal storage system, formed by a battery and a hot water tank along with an electrical water heater as a controllable load, which make possible the energy management within the microgrid. The microgrid emulates the operation of a single family home with domestic hot water (DHW consumption, a heating, ventilation and air conditioning (HVAC system as well as the typical electric loads. An energy management strategy has been designed which optimizes the power exchanged with the grid profile in terms of peaks and fluctuations, in applications with high penetration levels of renewables. The proposed energy management strategy has been evaluated and validated experimentally in a full scale residential microgrid built in our Renewable Energy Laboratory, by means of continuous operation under real conditions. The results show that the combination of electric and thermal storage systems with controllable loads is a promising technology that could maximize the penetration level of renewable energies in the electric system.

  14. Using demand-side management to decrease transformer ageing

    NARCIS (Netherlands)

    van der Klauw, Thijs; Gerards, Marco Egbertus Theodorus; Hurink, Johann L.

    2016-01-01

    The introduction of local, often uncontrollable, generation units as well as larger loads such as electric vehicles (EVs) causes an increasing amount of stress on our energy supply chain, specifically on the distribution grids. Demand-side management (DSM) is often seen as a potential technology to

  15. US electric utility demand-side management, 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-26

    The report presents comprehensive information on electric power industry demand-side management (DSM) activities in US at the national, regional, and utility levels. Objective is provide industry decision makers, government policy makers, analysts, and the general public with historical data that may be used in understanding DSM as it relates to the US electric power industry. The first chapter, ``Profile: US Electric Utility Demand-Side Management,`` presents a general discussion of DSM, its history, current issues, and a review of key statistics for the year. Subsequent chapters present discussions and more detailed data on energy savings, peak load reductions, and costs attributable to DSM.

  16. U.S. electric utility demand-side management 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-01

    The US Electric Utility Demand-Side Management report presents comprehensive information on electric power industry demand-side management (DSM) activities in the US at the national, regional, and utility levels. The objective of the publication is to provide industry decision makers, government policy makers, analysts, and the general public with historical data that may be used in understanding DSM as it related to the US electric power industry. The first chapter, ``Profile: U.S. Electric Utility Demand-Side Management,`` presents a general discussion of DSM, its history, current issues, and a review of key statistics for the year. Subsequent chapters present discussions and more detailed data on energy savings, peak load reductions and costs attributable to DSM. 9 figs., 24 tabs.

  17. Demand Side Management in Pellet Production: Internal and External Factors

    Directory of Open Access Journals (Sweden)

    Vigants Haralds

    2014-12-01

    Full Text Available This paper demonstrates a demand side management case study: how to save energy and how research and data analysis help to create an energy management system in a pellet production facility; and shows ways to implement the EU energy efficiency directive in production facilities. The study carried out in this research serves as a far-reaching step that can be taken to improve energy efficiency during the operation mode of technological equipment. The benchmarking methodology is used for analysis of results.

  18. Promoting healthcare innovation on the demand side.

    Science.gov (United States)

    Eisenberg, Rebecca S; Price, W Nicholson

    2017-04-01

    Innovation policy often focuses on fortifying the incentives of firms that develop and sell new products by offering them lucrative rights to exclude competitors from the market. Regulators also rely on these same firms-and on similar incentives-to develop information about the effects of their products in patients, despite their obvious conflict of interest. The result may be a distorted understanding that leads to overuse of expensive new medical technologies. Recent technological advances have put healthcare payers in an excellent position to play a larger role in future innovation to improve healthcare and reduce its costs. Insurance companies and integrated healthcare providers have custody of treasure troves of data about healthcare provision and outcomes that can yield valuable insights about the effects of medical treatment without the need to conduct costly clinical trials. Some integrated healthcare systems have seized upon this advantage to make notable discoveries about the effects of particular products that have changed the standard of care. Moreover, to the extent that healthcare payers can profit from reducing costs, they will seek to avoid inappropriate use of costly technologies. Greater involvement of payers in healthcare innovation thus offers a potential counterweight to the incentives of product sellers to promote excessive use of costly new products. In recent years, the federal government has sought to promote innovation through analysis of healthcare records in a series of initiatives; some picture insurers as passive data repositories, while others provide opportunities for insurers to take a more active role in innovation. In this paper, we examine the role of health insurers in developing new knowledge about the provision and effects of healthcare-what we call 'demand-side innovation'. We address the contours of this underexplored area of innovation and describe the behavior of participating firms. We examine the effects of current legal

  19. Promoting healthcare innovation on the demand side

    Science.gov (United States)

    Eisenberg, Rebecca S.

    2017-01-01

    Abstract Innovation policy often focuses on fortifying the incentives of firms that develop and sell new products by offering them lucrative rights to exclude competitors from the market. Regulators also rely on these same firms—and on similar incentives—to develop information about the effects of their products in patients, despite their obvious conflict of interest. The result may be a distorted understanding that leads to overuse of expensive new medical technologies. Recent technological advances have put healthcare payers in an excellent position to play a larger role in future innovation to improve healthcare and reduce its costs. Insurance companies and integrated healthcare providers have custody of treasure troves of data about healthcare provision and outcomes that can yield valuable insights about the effects of medical treatment without the need to conduct costly clinical trials. Some integrated healthcare systems have seized upon this advantage to make notable discoveries about the effects of particular products that have changed the standard of care. Moreover, to the extent that healthcare payers can profit from reducing costs, they will seek to avoid inappropriate use of costly technologies. Greater involvement of payers in healthcare innovation thus offers a potential counterweight to the incentives of product sellers to promote excessive use of costly new products. In recent years, the federal government has sought to promote innovation through analysis of healthcare records in a series of initiatives; some picture insurers as passive data repositories, while others provide opportunities for insurers to take a more active role in innovation. In this paper, we examine the role of health insurers in developing new knowledge about the provision and effects of healthcare—what we call ‘demand-side innovation’. We address the contours of this underexplored area of innovation and describe the behavior of participating firms. We examine the

  20. Incentives for demand-side management

    Energy Technology Data Exchange (ETDEWEB)

    Reid, M.W.; Brown, J.B. [Barakat and Chamberlin, Inc., Oakland, CA (United States)

    1992-01-01

    This report is the first product of an ongoing project to monitor the efforts of states to remove regulatory barriers to, and provide financial incentives for, utility investment in demand-side management (DSM) resources. The project was commissioned by the National Association of Regulatory Utility Commissioners (NARUC) in response to growing interest among regulators for a comprehensive survey of developments in this area. Each state report beings with an overview of the state`s progress toward removing regulatory barriers and providing incentives for DSM. Information is organized under five headings: status; IRP regulations and practice; current treatment of DSM, directions and trends; commission contact person. Where applicable, each overview is followed by one or more sections that report on specific incentive proposals or mechanisms within the state. Information on each proposal or mechanism is organized under eight headings. A notation on each page identifies the utility or other group associated with the proposal or mechanism. The eight headings are as follows: status; background; treatment of cost recovery; treatment of lost revenues/decoupling; treatment of profitability; other features; issues, and additional observations.

  1. Incentives for demand-side management

    Energy Technology Data Exchange (ETDEWEB)

    Reid, M.W.; Brown, J.B. (Barakat and Chamberlin, Inc., Oakland, CA (United States))

    1992-01-01

    This report is the first product of an ongoing project to monitor the efforts of states to remove regulatory barriers to, and provide financial incentives for, utility investment in demand-side management (DSM) resources. The project was commissioned by the National Association of Regulatory Utility Commissioners (NARUC) in response to growing interest among regulators for a comprehensive survey of developments in this area. Each state report beings with an overview of the state's progress toward removing regulatory barriers and providing incentives for DSM. Information is organized under five headings: status; IRP regulations and practice; current treatment of DSM, directions and trends; commission contact person. Where applicable, each overview is followed by one or more sections that report on specific incentive proposals or mechanisms within the state. Information on each proposal or mechanism is organized under eight headings. A notation on each page identifies the utility or other group associated with the proposal or mechanism. The eight headings are as follows: status; background; treatment of cost recovery; treatment of lost revenues/decoupling; treatment of profitability; other features; issues, and additional observations.

  2. Supply-side-demand-side optimization and cost-environment trade offs for China`s coal and electricity system

    Energy Technology Data Exchange (ETDEWEB)

    Xie Zhijun; Kuby, M. [Boston University, Boston, MA (United States). Dept. of Geography, Center for Energy and Environmental Studies

    1997-02-01

    The authors simultaneously optimize supply-side and demand-size investments for satisfying China`s coal and electricity needs over a 15 year time horizon. The results are compared to equivalent results from a supply-side only optimization assuming a business-as-usual demand scenario. It is estimated that, by shifting investment from energy production and transportation to energy efficiency improvement, China could meet the same energy service demand in 2000 for 7% less cost and 120 million tons (mt) less coal. Alternatively, for greater environmental protection, China could satisfy the same demands at the same cost using 275 mt coal. 27 refs., 6 figs.

  3. Towards a systematic characterization of the potential of demand side management

    CERN Document Server

    Kleinhans, David

    2014-01-01

    With an increasing share of electric energy produced from non-dispatchable renewable sources both energy storage and demand side management might gain tremendously in importance. While there has been significant progress in general properties and technologies of energy storage, the systematic characterization of features particular to demand side management such as its intermittent, time-dependent potential seems to be lagging behind. As a consequence, the development of efficient and sustainable strategies for demand side management and its integration into large-scale energy system models are impeded. This work introduces a novel framework for a systematic time-resolved characterization of the potential for demand side management. It is based on the specification of individual devices both with respect to their scheduled demand and their potential of load shifting. On larger scales sector-specific profiles can straightforwardly be taken into account. The potential for demand side management is then specifie...

  4. Demand side resource operation on the Irish power system with high wind power penetration

    DEFF Research Database (Denmark)

    Keane, A.; Tuohy, A.; Meibom, Peter

    2011-01-01

    The utilisation of demand side resources is set to increase over the coming years with the advent of advanced metering infrastructure, home area networks and the promotion of increased energy efficiency. Demand side resources are proposed as an energy resource that, through aggregation, can form ...

  5. Demand Side Management in Pellet Production: Internal and External Factors

    Science.gov (United States)

    Vigants, Haralds; Blumberga, Dagnija; Veidenbergs, Ivars

    2014-12-01

    This paper demonstrates a demand side management case study: how to save energy and how research and data analysis help to create an energy management system in a pellet production facility; and shows ways to implement the EU energy efficiency directive in production facilities. The study carried out in this research serves as a far-reaching step that can be taken to improve energy efficiency during the operation mode of technological equipment. The benchmarking methodology is used for analysis of results. Internal and external factors and indicators, which affect energy management potential in pellet production are analysed. Analysis of external factors is based on the state legal framework regulating the development of the energy sector. Methodology on the analysis of energy demand includes the internal energy management of an enterprise. The experimental results discussed in this paper show that particular steps, which are oriented to specific use of technological equipment, could play significant role in energy efficiency improvement in industry which is illustrated by the pre-milling process in the pellet production system using power.

  6. Impact of Energy Demands

    Science.gov (United States)

    Cambel, Ali B.

    1970-01-01

    The types of pollutants associated with the process of power production are identified. A nine-point proposal is presented on the ways the increase in power demands might be achieved with the minimum threat to the environment. (PR)

  7. Primary Control by ON/OFF Demand-Side Devices

    DEFF Research Database (Denmark)

    Biegel, Benjamin; Hansen, Lars Henrik; Andersen, Palle

    2013-01-01

    manage the portfolio of devices to collectively provide a primary reserve delivery in an unbundled liberalized electricity market setting under current regulations. Furthermore, we formulate a binary linear optimization problem that minimizes the aggregator’s cost of providing a primary reserve delivery......We consider an aggregator managing a portfolio of ON/OFF demand-side devices. The devices are able to shift con- sumption in time within certain energy limitations; moreover, the devices are able to measure the system frequency and switch ON and OFF accordingly. We show how the aggregator can...

  8. Predictive Control of Demand Side Units Participating in the Primary Frequency Reserve Market

    DEFF Research Database (Denmark)

    Biegel, Benjamin; Stoustrup, Jakob; Andersen, Palle

    2013-01-01

    We consider an aggregator controlling a mixed portfolio of conventional power generators and demand side units. The generators are controllable within certain power and ramp limitations while the demand side units are characterized by flexible consumptions and therefore can be treated as energy...

  9. Demand side management for smart district heating

    DEFF Research Database (Denmark)

    Big, Oovidiu; Li, Hongwei; Svendsen, Svend

    2015-01-01

    The influence on the district heating network design and operation by using the energy storage capability inside the building is studied on different types of buildings under Danish climate. The building envelope has significant role in buildings energy consumption but also in building time const...

  10. Optimal Privacy-Cost Trade-off in Demand-Side Management with Storage

    OpenAIRE

    Tan, Onur; Gündüz, Deniz; Gómez-Vilardebó, Jesús

    2015-01-01

    Demand-side energy storage management is studied from a joint privacy-energy cost optimization perspective. Assuming that the user's power demand profile as well as the electricity prices are known non-causally, the optimal energy management (EM) policy that jointly increases the privacy of the user and reduces his energy cost is characterized. The backward water-filling interpretation is provided for the optimal EM policy. While the energy cost is reduced by requesting more energy when the p...

  11. Demand side management for smart district heating

    DEFF Research Database (Denmark)

    Big, Oovidiu; Li, Hongwei; Svendsen, Svend

    2015-01-01

    constant. The results show that by the extensive renovation the energy consumption and the peak load could be reduced with more than 55% for two heating systems: radiant floor heating and radiators convective heating. Light renovation case has the peak load and energy consumption decreased with values...... between 25% and 35%. By making the light renovation, the heating system needs a minimum supply water temperature of 58ºC in order to cover the thermal comfort. Through extensive renovation, the supply water temperature could be reduced to 50ºC which makes it possible to transform the District Heating...

  12. Demand side management of electric car charging

    DEFF Research Database (Denmark)

    Finn, P.; Fitzpatrick, C.; Connolly, David

    2012-01-01

    the purchase of alternative energy vehicles in an effort to achieve 10% EV (electric vehicle) penetration in the country's road fleet by 2020. The replacement of ICE (internal combustion engine) vehicles with EV equivalents poses challenges for grid operators while simultaneously offering opportunities...

  13. Deep Neural Network Based Demand Side Short Term Load Forecasting

    Directory of Open Access Journals (Sweden)

    Seunghyoung Ryu

    2016-12-01

    Full Text Available In the smart grid, one of the most important research areas is load forecasting; it spans from traditional time series analyses to recent machine learning approaches and mostly focuses on forecasting aggregated electricity consumption. However, the importance of demand side energy management, including individual load forecasting, is becoming critical. In this paper, we propose deep neural network (DNN-based load forecasting models and apply them to a demand side empirical load database. DNNs are trained in two different ways: a pre-training restricted Boltzmann machine and using the rectified linear unit without pre-training. DNN forecasting models are trained by individual customer’s electricity consumption data and regional meteorological elements. To verify the performance of DNNs, forecasting results are compared with a shallow neural network (SNN, a double seasonal Holt–Winters (DSHW model and the autoregressive integrated moving average (ARIMA. The mean absolute percentage error (MAPE and relative root mean square error (RRMSE are used for verification. Our results show that DNNs exhibit accurate and robust predictions compared to other forecasting models, e.g., MAPE and RRMSE are reduced by up to 17% and 22% compared to SNN and 9% and 29% compared to DSHW.

  14. Temperature Effect on Energy Demand

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Young Duk [Korea Energy Economics Institute, Euiwang (Korea)

    1999-03-01

    We provide various estimates of temperature effect for accommodating seasonality in energy demand, particularly natural gas demand. We exploit temperature response and monthly temperature distribution to estimate the temperature effect on natural gas demand. Both local and global smoothed temperature responses are estimated from empirical relationship between hourly temperature and hourly energy consumption data during the sample period (1990 - 1996). Monthly temperature distribution estimates are obtained by kernel density estimation from temperature dispersion within a month. We integrate temperature response and monthly temperature density over all the temperatures in the sample period to estimate temperature effect on energy demand. Then, estimates of temperature effect are compared between global and local smoothing methods. (author). 15 refs., 14 figs., 2 tabs.

  15. Energy demand modeling for Uzbekistan

    Directory of Open Access Journals (Sweden)

    Bobur Khodjaev

    2012-05-01

    Full Text Available The paper is devoted to energy demand forecasting in Uzbekistan. Studies show that in spite of the abundant reserves of hydrocarbons, low energy efficiency can have an adverse impact on energy security in Uzbekistan in the future. Oil and gas are the main primary energy source and they ensure energy security of Uzbekistan. Energy demand forecasting is essential in order to develop an effective energy policy. Such forecast can be useful to plan oil and gas production volumes, to identify priorities for the industrial modernization and to create favorable conditions for sustainable economic development in the future. Author proposes model based on translog function for developing medium-and long-term development programs in energy sector and the modernization and technological re-equipment of industry.

  16. Modeling Supermarket Refrigeration Systems for Demand-Side Management

    Directory of Open Access Journals (Sweden)

    Jakob Stoustrup

    2013-02-01

    Full Text Available Modeling of supermarket refrigeration systems for supervisory control in the smart grid is presented in this paper. A modular modeling approach is proposed in which each module is modeled and identified separately. The focus of the work is on estimating the power consumption of the system while estimating the cold reservoir temperatures as well. The models developed for each module as well as for the overall integrated system are validated by real data collected from a supermarket in Denmark. The results show that the model is able to estimate the actual electrical power consumption with a high fidelity. Moreover a simulation benchmark is introduced based on the produced model for demand-side management in smart grid. Finally, a potential application of the proposed benchmark in direct control of the power/energy consumption is presented by a simple simulation example.

  17. Demand, Energy, and Power Factor

    Science.gov (United States)

    1994-08-01

    demand, but first, let’s talk some more about why electrical demand charges occur. Electric Load Leveling: 5 ** show flip chart of daily utility load (see...and cost savings for energy are available as a result of lowering demand. 3 ’~ show flip chart of block structure (see copy at end of script) Shown... flip chart (see copy at end of script) This is a graphical representation of real, apparent and reactive power in3 an AC circuit. Real power is the power

  18. Demand Side Management Performance Evaluation for Commercial Enterprises

    Directory of Open Access Journals (Sweden)

    Jun Dong

    2016-10-01

    Full Text Available Demand Side Management in power systems plays an important role in ensuring a reliable power supply and protecting the environment. Demand Side Management in the commercial sector is vital for sustainable development during China’s industrial restructuring. A hybrid multi-criteria decision making framework for evaluating Demand Side Management performance of commercial enterprises is proposed from a sustainability perspective. A fuzzy Analytic Hierarchy Process is employed to determine the weights of the criteria and a fuzzy technique for order preference by similarity to an ideal solution is applied to rank Demand Side Management performance. An evaluation index system is built, containing economic, social, environmental and technical criteria associated with 15 sub-criteria. Four groups of expert panels from government departments, research institutions, electricity utilities and commercial enterprises gave judgments on criteria weights and criteria performances for alternatives. The effectiveness of the proposed hybrid framework was demonstrated through a case study in Beijing, in which Demand Side Management performances of four alternatives were ranked. Sensitivity analysis results indicate that the hybrid framework is robust.

  19. Physiological and skill demands of 'on-side' and 'off-side' games.

    Science.gov (United States)

    Gabbett, Tim J; Jenkins, David G; Abernethy, Bruce

    2010-11-01

    This study investigated the physiological and skill demands of 'on-side' and 'off-side' games in elite rugby league players. Sixteen male rugby league players participated in 'on-side' and 'off-side' games. Both small-sided games were played in a 40- × 40-m playing area. The 'off-side' game permitted players to have 3 'plays' while in possession of the ball. Players were permitted to pass backward or forward (to an 'off-side' player). The 'on-side' game also permitted players to have 3 'plays' while in possession of the ball. However, players were only permitted to pass backward to players in an 'on-side' position. Heart rate and movement patterns (via global positioning system) were recorded continuously throughout both games. Data were collected on the distance covered, number of high-acceleration and velocity efforts, and recovery between efforts. Video footage was also taken to track the performance of the players. Post hoc inspection of the footage was undertaken to count the number of possessions and the number and quality of disposals. In comparison to 'on-side' games, 'off-side' games had a greater number of involvements ("touches"), passes, and effective passes. However, the cognitive demands of 'on-side' games were greater than 'off-side' games. 'Off-side' games resulted in a greater total distance covered, greater distance covered in mild and moderate accelerations, and greater distance covered in low, moderate, and high-velocity efforts. There were also a greater number of short duration recovery periods between efforts in 'off-side' games. The results of this study demonstrate that 'off-side' games provide greater physiological and skill demands than 'on-side' games. 'Off-side' games may provide a practical alternative to 'on-side' games for the development of skill and fitness in elite rugby league players.

  20. Energy demand and population change.

    Science.gov (United States)

    Allen, E L; Edmonds, J A

    1981-09-01

    During the post World War 2 years energy consumption has grown 136% while population grew about 51%; per capita consumption of energy expanded, therefore, about 60%. For a given population size, demographic changes mean an increase in energy needs; for instance the larger the group of retirement age people, the smaller their energy needs than are those for a younger group. Estimates indicate that by the year 2000 the energy impact will be toward higher per capita consumption with 60% of the population in the 19-61 age group of workers. Rising female labor force participation will increase the working group even more; it has also been found that income and energy grow at a proportional rate. The authors predict that gasoline consumption within the US will continue to rise with availability considering the larger number of female drivers and higher per capita incomes. The flow of illegal aliens (750,000/year) will have a major impact on income and will use greater amounts of energy than can be expected. A demographic change which will lower energy demands will be the slowdown of the rate of household formation caused by the falling number of young adults. The response of energy demand to price changes is small and slow but incomes play a larger role as does the number of personal automobiles and social changes affecting household formation. Households, commercial space, transportation, and industry are part of every demand analysis and population projections play a major role in determining these factors.

  1. New Real-Time Market Facilitating Demand-Side Resources for System Balancing

    DEFF Research Database (Denmark)

    Feng, Donghan; Nyeng, Preben; Xie, Jun

    2011-01-01

    the participation of demand-side resources. In light of the future environment of increasing intermittent renewable power and distributed energy/storage resources, stochastic time-series and Monte-Carlo simulation are used to analyze the relationship between balancing requirement and generation/demand uncertainties...

  2. Addressing Energy Demand through Demand Response. International Experiences and Practices

    Energy Technology Data Exchange (ETDEWEB)

    Shen, Bo [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Ghatikar, Girish [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Ni, Chun Chun [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Dudley, Junqiao [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Martin, Phil [Enernoc, Inc., Boston, MA (United States); Wikler, Greg

    2012-06-01

    Demand response (DR) is a load management tool which provides a cost-effective alternative to traditional supply-side solutions to address the growing demand during times of peak electrical load. According to the US Department of Energy (DOE), demand response reflects “changes in electric usage by end-use customers from their normal consumption patterns in response to changes in the price of electricity over time, or to incentive payments designed to induce lower electricity use at times of high wholesale market prices or when system reliability is jeopardized.” 1 The California Energy Commission (CEC) defines DR as “a reduction in customers’ electricity consumption over a given time interval relative to what would otherwise occur in response to a price signal, other financial incentives, or a reliability signal.” 2 This latter definition is perhaps most reflective of how DR is understood and implemented today in countries such as the US, Canada, and Australia where DR is primarily a dispatchable resource responding to signals from utilities, grid operators, and/or load aggregators (or DR providers).

  3. Impact of Demand Side Management in Active Distribution Networks

    DEFF Research Database (Denmark)

    Ponnaganti, Pavani; Bak-Jensen, Birgitte; Pillai, Jayakrishnan Radhakrishna

    2017-01-01

    Demand Side Management (DSM) is an efficient flexible program which helps distribution network operators to meet the future critical peak demand. It is executed in cases of not only technical issues like voltage sag or swell, transformer burdening, cable congestions, but also to increase the degree...... of visibility in the electricity markets. The aim of this paper is to find the optimal flexible demands that can be shifted to another time in order to operate the active distribution system within secure operating limits. A simple mechanism is proposed for finding the flexibility of the loads where electric...

  4. Demand side management scheme in smart grid with cloud computing approach using stochastic dynamic programming

    Directory of Open Access Journals (Sweden)

    S. Sofana Reka

    2016-09-01

    Full Text Available This paper proposes a cloud computing framework in smart grid environment by creating small integrated energy hub supporting real time computing for handling huge storage of data. A stochastic programming approach model is developed with cloud computing scheme for effective demand side management (DSM in smart grid. Simulation results are obtained using GUI interface and Gurobi optimizer in Matlab in order to reduce the electricity demand by creating energy networks in a smart hub approach.

  5. Energy supply and demand in California

    Science.gov (United States)

    Griffith, E. D.

    1978-01-01

    The author expresses his views on future energy demand on the west coast of the United States and how that energy demand translates into demand for major fuels. He identifies the major uncertainties in determining what future demands may be. The major supply options that are available to meet projected demands and the policy implications that flow from these options are discussed.

  6. Indirect Control for Demand Side Management – A Conceptual Introduction

    DEFF Research Database (Denmark)

    Heussen, Kai; You, Shi; Biegel, Benjamin

    2012-01-01

    correct definition, either as a control or a market concept. This paper aims to provide a conceptual introduction to "indirect control" for management of small and distributed demand side resources. A review of control concepts and an analysis of "indirectness" features are provided to create a framework......The concept of “indirect control” has become a relevant discussion term in relation to activation distributed and small-scale demand and generation units to provide resources for power system balancing. The term and its association with price signals has, however caused some confusion as to its...

  7. Impacts of Demand-Side Resources on Electric Transmission Planning

    Energy Technology Data Exchange (ETDEWEB)

    Hadley, Stanton W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Sanstad, Alan H. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2015-01-01

    Will demand resources such as energy efficiency (EE), demand response (DR), and distributed generation (DG) have an impact on electricity transmission requirements? Five drivers for transmission expansion are discussed: interconnection, reliability, economics, replacement, and policy. With that background, we review the results of a set of transmission studies that were conducted between 2010 and 2013 by electricity regulators, industry representatives, and other stakeholders in the three physical interconnections within the United States. These broad-based studies were funded by the US Department of Energy and included scenarios of reduced load growth due to EE, DR, and DG. While the studies were independent and used different modeling tools and interconnect-specific assumptions, all provided valuable results and insights. However, some caveats exist. Demand resources were evaluated in conjunction with other factors, and limitations on transmission additions between scenarios made understanding the role of demand resources difficult. One study, the western study, included analyses over both 10- and 20-year planning horizons; the 10-year analysis did not show near-term reductions in transmission, but the 20-year indicated fewer transmission additions, yielding a 36percent capital cost reduction. In the eastern study the reductions in demand largely led to reductions in local generation capacity and an increased opportunity for low-cost and renewable generation to export to other regions. The Texas study evaluated generation changes due to demand, and is in the process of examining demand resource impacts on transmission.

  8. Optimal Load Response to Time-of-Use Power Price for Demand Side Management in Denmark

    DEFF Research Database (Denmark)

    Hu, Weihao; Chen, Zhe; Bak-Jensen, Birgitte

    2010-01-01

    -of-use power price for demand side management in order to save the energy costs as much as possible. 3 typical different kinds of loads (industrial load, residential load and commercial load) in Denmark are chosen as study cases. The energy costs decrease up to 9.6% with optimal load response to time......-of-use power price for different loads. Simulation results show that the optimal load response to time-of-use power price for demand side management generates different load profiles and reduces the load peaks. This kind of load patterns may also have significant effects on the power system normal operation....

  9. Visualisation turns down energy demand

    Energy Technology Data Exchange (ETDEWEB)

    Jensen, Ole Michael [Danish Building and Urban Research, Hoersholm (Denmark)

    2003-07-01

    After many energy saving campaigns, Danish families give the impression that they are conscious of energy consumption. Children have learned to turn off the light and adults to buy low-energy bulbs and household appliances. Questioned about their energy consumption and its fluctuations, the same people nevertheless confess to not really knowing. You pay your energy bill but pay no attention to the current consumption, or its level. Unlike other types of consumption, energy consumption is an almost invisible type of consumption. Nevertheless, as a secondary consumption it is much affected by primary consumption in the form of white goods, appliances, cars, food etc., the main purpose of which usually is visibility. This paper presents the result of an experiment to make the energy consumption visible. Meters in the flats showing actual electricity, heat and water consumption confront tenants with the consequences of their own behaviour. The experiment also investigates different set-ups concerning information and communication about energy consumption. Monthly consumption and levels of consumption compared within the neighbourhood are elements of this information. Also quarterly eco-accounting, with key-figures of consumption and environmental considerations like CO{sub 2} emission, are part of the information set-up. Within the first year of visualisation one case shows a 9% reduction of heat and a 22% reduction of electricity. The other cases seem to follow the same tendency. The philosophy of the experiment is that you must know your position in order to change it. You must know about the level of your own energy consumption in order to turn down energy demand. The visible meters are elements in 'Urban Ecological Renewal of a Housing Block' (Hedebygade Block) in a central district of Copenhagen.

  10. 基于需求侧减排的节能调度及其改进NSGA-Ⅱ算法%Demand-side emission reduction based energy-saving dispatch and the improved NSGA-Ⅱ method

    Institute of Scientific and Technical Information of China (English)

    张鹏; 刘继春; 田伟

    2012-01-01

    提出一种基于需求侧减排的节能调度方法,在此基础上,建立基于火电机组负荷分配和需求控制方案最优的双层优化模型,设计了迭代算法,并利用改进NSGA-Ⅱ法对下层多目标模型进行求解.算例分析表明,该模型在保证电网运行经济性的前提下,能使发电和需求侧的污染物排放水平显著降低,并能提供各发电机组的调度方案及需求的控制方案,具有一定的实用性;所提出的改进NSGA-Ⅱ法与一般NSGA-Ⅱ法、多目标遗传算法相比,能改善帕雷托解集的空间分布,降低迭代次数,因此性能更优.%This paper proposes an energy-saving dispatch method based on emission reduction of demand side, then establishes a bi-level optimization model based on the optimal allocation plan of thermal units and interruptible loads, and solves the problem with the utilization of improved NSGA-II and iteration algorithm. The case study shows that this model can decrease the pollutants at both generation side and demand side significantly with guaranteeing the economic of power grid operation. The model can also give the dispatch schedule of thermal units and interruptible loads accurately and thus has some practical value. The proposed NSGA-II method can uniform spatial distribution of Pareto solutions and reduce iteration number in comparison with normal NSGA-II and multi-objective genetic algorithm.

  11. Distributed MPC applied to power demand side control

    NARCIS (Netherlands)

    Larsen, G.K.H.; Pons, J.; Achterop, S.; Scherpen, J.M.A.

    2013-01-01

    In the future, global energy balance of a smart grid system can be achieved by its agents deciding on their own power demand locally and the exchange of these decisions. In this paper, we model a network of households with washing machine programs that can be shifted in time so that the overall powe

  12. Measuring and controlling unfairness in decentralized planning of energy demand

    NARCIS (Netherlands)

    Pournaras, E.; Vasirani, M.; Kooij, R.E.; Aberer, K.

    2014-01-01

    Demand-side energy management improves robustness and efficiency in Smart Grids. Load-adjustment and load-shifting are performed to match demand to available supply. These operations come at a discomfort cost for consumers as their lifestyle is influenced when they adjust or shift in time their dema

  13. Measuring and controlling unfairness in decentralized planning of energy demand

    NARCIS (Netherlands)

    Pournaras, E.; Vasirani, M.; Kooij, R.E.; Aberer, K.

    2014-01-01

    Demand-side energy management improves robustness and efficiency in Smart Grids. Load-adjustment and load-shifting are performed to match demand to available supply. These operations come at a discomfort cost for consumers as their lifestyle is influenced when they adjust or shift in time their

  14. Smart grid dispatch strategy for on/off demand-side devices

    DEFF Research Database (Denmark)

    Biegel, Benjamin; Andersen, Palle; Pedersen, Tom S.

    2013-01-01

    We consider an aggregator managing a portfolio of runtime and downtime constrained ON/OFF demand-side devices. The devices are able to shift consumption in time within certain energy limitations. We show how the aggregator can manage the portfolio of devices to collectively provide upward and dow...

  15. Modelling Demand Side Kelas Menengah Pemuda Kota Surabaya

    OpenAIRE

    Achmadi Achmadi; Gigih Prihantono

    2014-01-01

    Middle class is an interesting topic in social studies to do a research. Based on Mckenzie, there are currently 45 million people in Indonesia can be categorized as middle class, and in 2030 will reach 135 million people. The middle class is the biggest support of drive economic growth from the demand side. This study aims to perform a simple modeling of middle-class’s cuncumption behavior, which study middle-class subculture in the city of Surabaya. This study uses an econometric tool called...

  16. Demand side integration aspects in active distribution planning

    DEFF Research Database (Denmark)

    Silvestro, Federico; Baitch, Alex; Pilo, Fabrizio

    2013-01-01

    will be implemented in practice? How will regulatory frameworks and connection agreements evolve to support ADSs? The present work provides some information about the closer and closer integration between network planning and Demand Side Integration that is foreseen in the future and shows the necessity to develop......This paper presents an overview of the activities of CIGRE Working Group WG C6.19 (WG), focusing on the planning and optimization of active distribution systems. A key challenge in planning Active Distribution Systems (ADSs) is the uncertainty of the future, i.e., what level of active management...

  17. Distributed demand-side optimization in the smart grid

    OpenAIRE

    Atzeni, Italo

    2014-01-01

    Tesi per compendi de publicacions. DOI els articles publicats per IEEE: 10.1109/TSG.2012.2206060, 10.1109/TSP.2013.2248002, 10.1109/TSP.2014.2307835 The modern power grid is facing major challenges in the transition to a low-carbon energy sector. The growing energy demand and environmental concerns require carefully revisiting how electricity is generated, transmitted, and consumed, with an eye to the integration of renewable energy sources. The envisioned smart grid is expected to address...

  18. Modelling Demand Side Kelas Menengah Pemuda Kota Surabaya

    Directory of Open Access Journals (Sweden)

    Achmadi Achmadi

    2014-05-01

    Full Text Available Middle class is an interesting topic in social studies to do a research. Based on Mckenzie, there are currently 45 million people in Indonesia can be categorized as middle class, and in 2030 will reach 135 million people. The middle class is the biggest support of drive economic growth from the demand side. This study aims to perform a simple modeling of middle-class’s cuncumption behavior, which study middle-class subculture in the city of Surabaya. This study uses an econometric tool called the logistic regression with two purchases decision, impulse buying and planned buying, as dependent variables in the model. Results of this study also show that the income effect variables, motivational variables and variable materialistic values ??consume has a significant and positive effect on impulse buying purchasing decisions. While product involvement variable have positive influence on planned purchases buying behavior.

  19. Modeling and Analysis of Commercial Building Electrical Loads for Demand Side Management

    Science.gov (United States)

    Berardino, Jonathan

    In recent years there has been a push in the electric power industry for more customer involvement in the electricity markets. Traditionally the end user has played a passive role in the planning and operation of the power grid. However, many energy markets have begun opening up opportunities to consumers who wish to commit a certain amount of their electrical load under various demand side management programs. The potential benefits of more demand participation include reduced operating costs and new revenue opportunities for the consumer, as well as more reliable and secure operations for the utilities. The management of these load resources creates challenges and opportunities to the end user that were not present in previous market structures. This work examines the behavior of commercial-type building electrical loads and their capacity for supporting demand side management actions. This work is motivated by the need for accurate and dynamic tools to aid in the advancement of demand side operations. A dynamic load model is proposed for capturing the response of controllable building loads. Building-specific load forecasting techniques are developed, with particular focus paid to the integration of building management system (BMS) information. These approaches are tested using Drexel University building data. The application of building-specific load forecasts and dynamic load modeling to the optimal scheduling of multi-building systems in the energy market is proposed. Sources of potential load uncertainty are introduced in the proposed energy management problem formulation in order to investigate the impact on the resulting load schedule.

  20. Optimization Models and Methods for Demand-Side Management of Residential Users: A Survey

    Directory of Open Access Journals (Sweden)

    Antimo Barbato

    2014-09-01

    Full Text Available The residential sector is currently one of the major contributors to the global energy balance. However, the energy demand of residential users has been so far largely uncontrollable and inelastic with respect to the power grid conditions. With the massive introduction of renewable energy sources and the large variations in energy flows, also the residential sector is required to provide some flexibility in energy use so as to contribute to the stability and efficiency of the electric system. To address this issue, demand management mechanisms can be used to optimally manage the energy resources of customers and their energy demand profiles. A very promising technique is represented by demand-side management (DSM, which consists in a proactive method aimed at making users energy-efficient in the long term. In this paper, we survey the most relevant studies on optimization methods for DSM of residential consumers. Specifically, we review the related literature according to three axes defining contrasting characteristics of the schemes proposed: DSM for individual users versus DSM for cooperative consumers, deterministic DSM versus stochastic DSM and day-ahead DSM versus real-time DSM. Based on this classification, we provide a big picture of the key features of different approaches and techniques and discuss future research directions.

  1. Water supply and demand in an energy supply model

    Energy Technology Data Exchange (ETDEWEB)

    Abbey, D; Loose, V

    1980-12-01

    This report describes a tool for water and energy-related policy analysis, the development of a water supply and demand sector in a linear programming model of energy supply in the United States. The model allows adjustments in the input mix and plant siting in response to water scarcity. Thus, on the demand side energy conversion facilities can substitute more costly dry cooling systems for conventional evaporative systems. On the supply side groundwater and water purchased from irrigators are available as more costly alternatives to unappropriated surface water. Water supply data is developed for 30 regions in 10 Western states. Preliminary results for a 1990 energy demand scenario suggest that, at this level of spatial analysis, water availability plays a minor role in plant siting. Future policy applications of the modeling system are discussed including the evaluation of alternative patterns of synthetic fuels development.

  2. Coordination of Energy Efficiency and Demand Response

    Energy Technology Data Exchange (ETDEWEB)

    Goldman, Charles; Reid, Michael; Levy, Roger; Silverstein, Alison

    2010-01-29

    This paper reviews the relationship between energy efficiency and demand response and discusses approaches and barriers to coordinating energy efficiency and demand response. The paper is intended to support the 10 implementation goals of the National Action Plan for Energy Efficiency's Vision to achieve all cost-effective energy efficiency by 2025. Improving energy efficiency in our homes, businesses, schools, governments, and industries - which consume more than 70 percent of the nation's natural gas and electricity - is one of the most constructive, cost-effective ways to address the challenges of high energy prices, energy security and independence, air pollution, and global climate change. While energy efficiency is an increasingly prominent component of efforts to supply affordable, reliable, secure, and clean electric power, demand response is becoming a valuable tool in utility and regional resource plans. The Federal Energy Regulatory Commission (FERC) estimated the contribution from existing U.S. demand response resources at about 41,000 megawatts (MW), about 5.8 percent of 2008 summer peak demand (FERC, 2008). Moreover, FERC recently estimated nationwide achievable demand response potential at 138,000 MW (14 percent of peak demand) by 2019 (FERC, 2009).2 A recent Electric Power Research Institute study estimates that 'the combination of demand response and energy efficiency programs has the potential to reduce non-coincident summer peak demand by 157 GW' by 2030, or 14-20 percent below projected levels (EPRI, 2009a). This paper supports the Action Plan's effort to coordinate energy efficiency and demand response programs to maximize value to customers. For information on the full suite of policy and programmatic options for removing barriers to energy efficiency, see the Vision for 2025 and the various other Action Plan papers and guides available at www.epa.gov/eeactionplan.

  3. 发电侧如何促进需求侧管理%How to Improve Demand Side Management in Generation Side

    Institute of Scientific and Technical Information of China (English)

    劳德容

    2002-01-01

    Combining with the practice of DSM in China, the paper analyzes the role of engaging demand side management in generation side. Also it deeply studies how to promote demand side management in generation side, which rarelyinvolves in the published literature all over the world. Besides, it discovers the interactions of interdependence and competition between demand side managenent and generation side operation. Lastly it studies the example of demand side management in generation side in Shenzhen.

  4. Challenges of using model predictive control for active demand side management

    DEFF Research Database (Denmark)

    Zong, Yi; You, Shi; Hu, Junjie

    2015-01-01

    architecture design for Model Predictive Controller (MPC), and discusses the challenges encountered during the implementation of MPC for active demand side management. The two different pilot case studies show that energy savings and load shifting can be achieved by applying MPC with weather forecast......When there is a high penetration of renewables in the power system, it requires coordinated management of large numbers of distributed and demand response resources, intermittent resources to maintain the grid reliability and improve operational economics. This paper presents a hierarchical...

  5. Demand-Side Contribution to Primary Frequency Control With Wind Farm Auxiliary Control

    DEFF Research Database (Denmark)

    Gomez-Lazaro, Emilio; Munoz-Benavente, Irene; Hansen, Anca Daniela

    2014-01-01

    , particularly in regions that are weakly interconnected with their surrounding areas, such as small islands. This paper addresses the problem of frequency control in isolated power systems with relevant inclusion of wind power generation. With this aim, we have analyzed the contribution of the demand side......Maintaining a close balance between power generation and demand is essential for sustaining the quality and reliability of a power system. Currently, due to increased renewable energy generation, frequency deviations and power fluctuations of greater concern are being introduced to the grid...

  6. Modelling energy demand of Croatian industry sector

    DEFF Research Database (Denmark)

    Medić, Zlatko Bačelić; Pukšec, Tomislav; Mathiesen, Brian Vad

    2014-01-01

    Industry represents one of the most interesting sectors when analysing Croatian final energy demand. Croatian industry represents 20% of nation's GDP and employs 25% of total labour force making it a significant subject for the economy. Today, with around 60 PJ of final energy demand...

  7. A novel microgrid demand-side management system for manufacturing facilities

    Science.gov (United States)

    Harper, Terance J.

    Thirty-one percent of annual energy consumption in the United States occurs within the industrial sector, where manufacturing processes account for the largest amount of energy consumption and carbon emissions. For this reason, energy efficiency in manufacturing facilities is increasingly important for reducing operating costs and improving profits. Using microgrids to generate local sustainable power should reduce energy consumption from the main utility grid along with energy costs and carbon emissions. Also, microgrids have the potential to serve as reliable energy generators in international locations where the utility grid is often unstable. For this research, a manufacturing process that had approximately 20 kW of peak demand was matched with a solar photovoltaic array that had a peak output of approximately 3 KW. An innovative Demand-Side Management (DSM) strategy was developed to manage the process loads as part of this smart microgrid system. The DSM algorithm managed the intermittent nature of the microgrid and the instantaneous demand of the manufacturing process. The control algorithm required three input signals; one from the microgrid indicating the availability of renewable energy, another from the manufacturing process indicating energy use as a percent of peak production, and historical data for renewable sources and facility demand. Based on these inputs the algorithm had three modes of operation: normal (business as usual), curtailment (shutting off non-critical loads), and energy storage. The results show that a real-time management of a manufacturing process with a microgrid will reduce electrical consumption and peak demand. The renewable energy system for this research was rated to provide up to 13% of the total manufacturing capacity. With actively managing the process loads with the DSM program alone, electrical consumption from the utility grid was reduced by 17% on average. An additional 24% reduction was accomplished when the microgrid

  8. Distributed Optimisation Algorithm for Demand Side Management in a Grid-Connected Smart Microgrid

    Directory of Open Access Journals (Sweden)

    Omowunmi Mary Longe

    2017-06-01

    Full Text Available The contributions of Distributed Energy Generation (DEG and Distributed Energy Storage (DES for Demand Side Management (DSM purposes in a smart macrogrid or microgrid cannot be over-emphasised. However, standalone DEG and DES can lead to under-utilisation of energy generation by consumers and financial investments; in grid-connection mode, though, DEG and DES can offer arbitrage opportunities for consumers and utility provider(s. A grid-connected smart microgrid comprising heterogeneous (active and passive smart consumers, electric vehicles and a large-scale centralised energy storage is considered in this paper. Efficient energy management by each smart entity is carried out by the proposed Microgrid Energy Management Distributed Optimisation Algorithm (MEM-DOA installed distributively within the network according to consumer type. Each smart consumer optimises its energy consumption and trading for comfort (demand satisfaction and profit. The proposed model was observed to yield better consumer satisfaction, higher financial savings, and reduced Peak-to-Average-Ratio (PAR demand on the utility grid. Other associated benefits of the model include reduced investment on peaker plants, grid reliability and environmental benefits. The MEM-DOA also offered participating smart consumers energy and tariff incentives so that passive smart consumers do not benefit more than active smart consumers, as was the case with some previous energy management algorithms.

  9. Minimum Energy Demand Locomotion on Space Station

    Directory of Open Access Journals (Sweden)

    Wing Kwong Chung

    2013-01-01

    Full Text Available The energy of a space station is a precious resource, and the minimization of energy consumption of a space manipulator is crucial to maintain its normal functionalities. This paper first presents novel gaits for space manipulators by equipping a new gripping mechanism. With the use of wheels locomotion, lower energy demand gaits can be achieved. With the use of the proposed gaits, we further develop a global path planning algorithm for space manipulators which can plan a moving path on a space station with a minimum total energy demand. Different from existing approaches, we emphasize both the use of the proposed low energy demand gaits and the gaits composition during the path planning process. To evaluate the performance of the proposed gaits and path planning algorithm, numerous simulations are performed. Results show that the energy demand of both the proposed gaits and the resultant moving path is also minimum.

  10. Exploring Tradeoffs in Demand-side and Supply-side Management of Urban Water Resources using Agent-based Modeling and Evolutionary Computation

    Science.gov (United States)

    Kanta, L.; Berglund, E. Z.

    2015-12-01

    Urban water supply systems may be managed through supply-side and demand-side strategies, which focus on water source expansion and demand reductions, respectively. Supply-side strategies bear infrastructure and energy costs, while demand-side strategies bear costs of implementation and inconvenience to consumers. To evaluate the performance of demand-side strategies, the participation and water use adaptations of consumers should be simulated. In this study, a Complex Adaptive Systems (CAS) framework is developed to simulate consumer agents that change their consumption to affect the withdrawal from the water supply system, which, in turn influences operational policies and long-term resource planning. Agent-based models are encoded to represent consumers and a policy maker agent and are coupled with water resources system simulation models. The CAS framework is coupled with an evolutionary computation-based multi-objective methodology to explore tradeoffs in cost, inconvenience to consumers, and environmental impacts for both supply-side and demand-side strategies. Decisions are identified to specify storage levels in a reservoir that trigger (1) increases in the volume of water pumped through inter-basin transfers from an external reservoir and (2) drought stages, which restrict the volume of water that is allowed for residential outdoor uses. The proposed methodology is demonstrated for Arlington, Texas, water supply system to identify non-dominated strategies for an historic drought decade. Results demonstrate that pumping costs associated with maximizing environmental reliability exceed pumping costs associated with minimizing restrictions on consumer water use.

  11. Demand Side Management behind the meter. Estimation of the potential for preservation; Demand Side Management achter de meter. Raming verduurzamingspotentielen

    Energy Technology Data Exchange (ETDEWEB)

    Kester, J.C.P.; Zondag, H.A. [ECN Energie Gebouwde Omgeving en Netten, Petten (Netherlands)

    2006-12-15

    Insight is given into the technical potential for increasing the sustainability of the built environment by application of advanced control systems. Attention has been focused on control systems using environment adaptive, user adaptive and user educating control, including demand response. The technical potentials estimated are meant for prioritising research and are strongly dependent upon assumptions that could not always be verified within this research. The technical savings potential of advanced control systems in the whole built environment is estimated to be of the order of 190 PJ{sub p} of primary energy per annum (6% of the Dutch total) and 12 Mton CO2 emission reduction per annum (7% of the Dutch total). In the residential sector automated user adaptive control represents about two third of the estimated savings potential, and and user educating control about one third. In the service sector the majority of the potential is covered by improved operation and maintenance through on going monitoring. In addition to the use of advanced control systems for the reduction of primary energy use, it is also possible introduce demand response in the built environment. This does not directly lead to the reduction of the primary energy use, but it will be necessary in future electricity grids with a high penetration of intermittent, renewable energy sources. In the residential sector there is a significant potential for demand response by shifting the electricity demand of various appliances: 34 PJ{sub e} demand response per annum. The additional potential for the service sector could not be estimated due to a lack of data. These estimations of potential were based on the current composition of the building stock and the domestic equipment currently used. Future potentials will depend upon the development of the building characteristics and the domestic equipment used. It is suggested to focus technology development on the following issues: (1) user adaptive control

  12. How to tackle energy saving and load leveling. Energy saving towards 2000 and measures for the coming winter (energy-saving activities by California`s SCE, demand side management activities); Sho energy fuka heijunka ni do torikumuka. Seireki 2000 nen ni muketa sho energy to konto no shoene taisaku, Kashu SCE no sho energy (DSM katsudo wo saguru)

    Energy Technology Data Exchange (ETDEWEB)

    Nasu, S. [The Energy Conservation Center Japan, Tokyo (Japan)

    1997-02-01

    Tokyo Electric Power has realized a peak shift of 5% for the maximum power demand by various measures to cope with increasing power demand and differential rate by time zone, including expansion of the differential rate system and heat-storage systems. Some of more notable recent techniques are eco-ice and eco-vendor systems, the former storing ice in the heat-storage tanks and the latter strongly cooling vending machines during nighttime. The NAS battery system is being developed as the new technique for load leveling. The energy-related advisory organ for Minister of International Trade and Industry asks each industrial unit to save at least 1% of power on the annual average as the energy-saving measure towards 2000. The energy-saving measures promoted by the government for the coming winter are controlled release of wastes, efficient use of power, setting room temperature at 19{degree}C or lower and voluntarily refrain from commuting by cars. The US power industry is abandoning the concept of DSM in the midst of deregulation and increased competition, and cutting budgets for new energy development. California`s SCE is promoting energy-saving through expanded use of high-efficiency motors, accurate grasp of customers` needs and publicity activities through internet systems. 4 figs., 1 tab.

  13. Strengthen Domestic Construction to Satisfy Energy Demand

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    @@ The energy issue is a common concern for all countries in the world and also a challenge to China, and Chinese government attaches great importance to the issue.China's demand for energy rises steadily with its fast economic growth. In face of energy resources shortages, China has to implement a twofold strategy on the energy issue: strenuously consolidating domestic resources construction, and rigorously enforcing energy-saving by improving public awareness of energy conservation.

  14. Energy infrastructure: Mapping future electricity demand

    Science.gov (United States)

    Janetos, Anthony C.

    2016-08-01

    Electricity distribution system planners rely on estimations of future energy demand to build adequate supply, but these are complicated to achieve. An approach that combines spatially resolved projections of population movement and climate change offers a method for building better demand maps to mid-century.

  15. Elasticity of Energy Demand and Challenges for China's Energy Industry

    Institute of Scientific and Technical Information of China (English)

    Jason Zunsheng Yin; David Forrest Gates

    2006-01-01

    The rapid growth of energy demand, the lagging growth of energy production and rising pollution problems have raised concerns in several policy areas, including the availability and cost of energy supply and the possibility of further adverse impacts on the environment. This paper begins with an overview of recent developments in energy demand and supply in China.Using a traditional demand elasticity approach, it analyzes the elasticity of each of four major energy end uses and the potential for adjustments in their relationships. The paper concludes with suggestions for public policy to meet the challenge of growing energy demand and implications for the private sector, including both private and foreign investments.

  16. Demand Response and Energy Storage Integration Study

    Energy Technology Data Exchange (ETDEWEB)

    Ookie Ma, Kerry Cheung

    2016-03-01

    Demand response and energy storage resources present potentially important sources of bulk power system services that can aid in integrating variable renewable generation. While renewable integration studies have evaluated many of the challenges associated with deploying large amounts of variable wind and solar generation technologies, integration analyses have not yet fully incorporated demand response and energy storage resources. This report represents an initial effort in analyzing the potential integration value of demand response and energy storage, focusing on the western United States. It evaluates two major aspects of increased deployment of demand response and energy storage: (1) Their operational value in providing bulk power system services and (2) Market and regulatory issues, including potential barriers to deployment.

  17. Hawaii demand-side management resource assessment. Final report: DSM opportunity report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-08-01

    The Hawaii Demand-Side Management Resource Assessment was the fourth of seven projects in the Hawaii Energy Strategy (HES) program. HES was designed by the Department of Business, Economic Development, and Tourism (DBEDT) to produce an integrated energy strategy for the State of Hawaii. The purpose of Project 4 was to develop a comprehensive assessment of Hawaii`s demand-side management (DSM) resources. To meet this objective, the project was divided into two phases. The first phase included development of a DSM technology database and the identification of Hawaii commercial building characteristics through on-site audits. These Phase 1 products were then used in Phase 2 to identify expected energy impacts from DSM measures in typical residential and commercial buildings in Hawaii. The building energy simulation model DOE-2.1E was utilized to identify the DSM energy impacts. More detailed information on the typical buildings and the DOE-2.1E modeling effort is available in Reference Volume 1, ``Building Prototype Analysis``. In addition to the DOE-2.1E analysis, estimates of residential and commercial sector gas and electric DSM potential for the four counties of Honolulu, Hawaii, Maui, and Kauai through 2014 were forecasted by the new DBEDT DSM Assessment Model. Results from DBEDTs energy forecasting model, ENERGY 2020, were linked with results from DOE-2.1E building energy simulation runs and estimates of DSM measure impacts, costs, lifetime, and anticipated market penetration rates in the DBEDT DSM Model. Through its algorithms, estimates of DSM potential for each forecast year were developed. Using the load shape information from the DOE-2.1E simulation runs, estimates of electric peak demand impacts were developed. 10 figs., 55 tabs.

  18. Electricity Demand and Energy Consumption Management System

    CERN Document Server

    Sarmiento, Juan Ojeda

    2008-01-01

    This project describes the electricity demand and energy consumption management system and its application to the Smelter Plant of Southern Peru. It is composted of an hourly demand-forecasting module and of a simulation component for a plant electrical system. The first module was done using dynamic neural networks, with backpropagation training algorithm; it is used to predict the electric power demanded every hour, with an error percentage below of 1%. This information allows management the peak demand before this happen, distributing the raise of electric load to other hours or improving those equipments that increase the demand. The simulation module is based in advanced estimation techniques, such as: parametric estimation, neural network modeling, statistic regression and previously developed models, which simulates the electric behavior of the smelter plant. These modules allow the proper planning because it allows knowing the behavior of the hourly demand and the consumption patterns of the plant, in...

  19. Industrial electricity demand and energy efficiency policy

    OpenAIRE

    Henriksson, Eva

    2010-01-01

    This dissertation consists of an introduction and five self-contained papers addressing the issues of industrial electricity demand and the role of energy efficiency policy. An important context for the study is the increased interest in so-called voluntary energy efficiency programs in which different types of tax exemptions are granted if the participating firms carry out energy efficiency measures following an energy audit. Paper 1 conceptually analyses the cost-effectiveness of voluntary ...

  20. Energy demand projections for energy [r]evolution 2012

    OpenAIRE

    Graus, W.H.J.; Kermeli, K.

    2012-01-01

    In this study energy demand scenarios are developed for the 2012 update of the Greenpeace/EREC Energy [R]evolution scenario. These scenarios cover energy demand in the period 2009-2050 for ten world regions (OECD Europe, OECD Americas, OECD Asia Oceania, Eastern Europe/Eurasia, China, India, Other non-OECD Asia, Latin America, Africa and Middle East).

  1. Energy demand projections for energy [r]evolution 2012

    NARCIS (Netherlands)

    Graus, W.H.J.; Kermeli, K.

    2012-01-01

    In this study energy demand scenarios are developed for the 2012 update of the Greenpeace/EREC Energy [R]evolution scenario. These scenarios cover energy demand in the period 2009-2050 for ten world regions (OECD Europe, OECD Americas, OECD Asia Oceania, Eastern Europe/Eurasia, China, India, Other n

  2. Energy demand and emissions of the non-energy sector

    NARCIS (Netherlands)

    Daioglou, Vasileios; Faaij, Andre P. C.; Saygin, Deger; Patel, Martin K.; Wicke, Birka; van Vuuren, Detlef P.

    The demand for fossil fuels for non-energy purposes such as production of bulk chemicals is poorly understood. In this study we analyse data on non-energy demand and disaggregate it across key services or products. We construct a simulation model for the main products of non-energy use and project

  3. Power System Transient Stability Improvement Using Demand Side Management in Competitive Electricity Markets

    DEFF Research Database (Denmark)

    Hu, Weihao; Wang, Chunqi; Chen, Zhe

    2012-01-01

    Since the hourly spot market price is available one day ahead in Denmark, the price could be transferred to the consumers and they may shift some of their loads from high price periods to the low price periods in order to save their energy costs. The optimal load response to an electricity price...... for demand side management generates different load profiles and may provide an opportunity to improve the transient stability of power systems with high wind power penetrations. In this paper, the idea of the power system transient stability improvement by using optimal load response to the electricity...

  4. Distributed demand side management via smart appliances contributing to frequency control

    Institute of Scientific and Technical Information of China (English)

    ZHANG Wei-chen

    2015-01-01

    Nowadays renewable energy has become a trend for energy production but its variable nature has made balancing of demand and supply of the power grid difficult. Dynamic demand management using smart appliances is proposed to serve as a way that part of the regulation burden of balancing demand and supply is shifted to the demand side. However, if all appliances respond to the same frequency deviation, they may start to synchronize, causing large power overshoots and instability of the power grid. Therefore, the idea of implementing randomness into the frequency control of the appliances is proposed and this is what we call a stochastic approach. Simulators are built from scratch to model both scenarios. The effect of synchronization is analyzed and the parameters that can affect the synchronization are investigated. It has been found that the larger the contribution from the smart appliances to the power grid, the easier and faster the synchronization takes place. The stochastic approach solves the problem of synchronization and averages out the large power overshoot. However, the overall performance of stochastic operations is unacceptable due to the randomness in the operation though the mean and variance are as expected. More advanced feedback policies and schemes may be designed to achieve a better performance.

  5. Assessing the potential of residential HVAC systems for demand-side management

    NARCIS (Netherlands)

    van der Klauw, Thijs; Hoogsteen, Gerwin; Gerards, Marco Egbertus Theodorus; Hurink, Johann L.; Feng, Xianyong; Hebner, Robert E.

    This paper investigates the potential of residential heating, ventilation and air conditioning systems to contribute to dynamic demand-side management. Thermal models for seven houses in Austin, Texas are developed with the goal of using them in a planning based demand-side management methodology.

  6. Demand side load management using a three step optimization methodology

    NARCIS (Netherlands)

    Bakker, Vincent; Bosman, M.G.C.; Molderink, Albert; Hurink, Johann L.; Smit, Gerardus Johannes Maria

    2010-01-01

    In order to keep a proper functional electricity grid and to prevent large investments in the current grid, the creation, transmission and consumption of electricity needs to be controlled and organized in a different way as done nowadays. Smart meters, distributed generation and -storage and demand

  7. Supply-side and demand-side cost sharing in deregulated social health insurance: which is more effective?

    Science.gov (United States)

    Trottmann, Maria; Zweifel, Peter; Beck, Konstantin

    2012-01-01

    Microeconomic theory predicts that if patients are fully insured and providers are paid fee-for-service, utilization of medical services exceeds the efficient level ('moral hazard effect'). In Switzerland, both demand-side and supply-side cost sharing have been introduced to mitigate this problem. Analyzing a panel dataset of about 160,000 adults, we find both types of cost sharing to be effective in curtailing the use of medical services. However, when moral hazard mitigation is traded off against risk selection, the minimum-deductible, supply-side cost sharing option ranks first, followed by the medium-deductible demand-side alternative, making the supply-side option somewhat more effective.

  8. Analysis of Cool Roof Coatings for Residential Demand Side Management in Tropical Australia

    Directory of Open Access Journals (Sweden)

    Wendy Miller

    2015-06-01

    Full Text Available Cool roof coatings have a beneficial impact on reducing the heat load of a range of building types, resulting in reduced cooling energy loads. This study seeks to understand the extent to which cool roof coatings could be used as a residential demand side management (DSM strategy for retrofitting existing housing in a constrained network area in tropical Australia where peak electrical demand is heavily influenced by residential cooling loads. In particular this study seeks to determine whether simulation software used for building regulation purposes can provide networks with the ‘impact certainty’ required by their DSM principles. The building simulation method is supported by a field experiment. Both numerical and experimental data confirm reductions in total consumption (kWh and energy demand (kW. The nature of the regulated simulation software, combined with the diverse nature of residential buildings and their patterns of occupancy, however, mean that simulated results cannot be extrapolated to quantify benefits to a broader distribution network. The study suggests that building data gained from regulatory simulations could be a useful guide for potential impacts of widespread application of cool roof coatings in this region. The practical realization of these positive impacts, however, would require changes to the current business model for the evaluation of DSM strategies. The study provides seven key recommendations that encourage distribution networks to think beyond their infrastructure boundaries, recognising that the broader energy system also includes buildings, appliances and people.

  9. Building energy demand aggregation and simulation tools

    DEFF Research Database (Denmark)

    Gianniou, Panagiota; Heller, Alfred; Rode, Carsten

    2015-01-01

    Nowadays, the minimization of energy consumption and the optimization of efficiency of the overall energy grid have been in the agenda of most national and international energy policies. At the same time, urbanization has put cities under the microscope towards achieving cost-effective energy...... savings due to their compact and highly dense form. Thus, accurate estimation of energy demand of cities is of high importance to policy-makers and energy planners. This calls for automated methods that can be easily expandable to higher levels of aggregation, ranging from clusters of buildings...... to neighbourhoods and cities. Buildings occupy a key place in the development of smart cities as they represent an important potential to integrate smart energy solutions. Building energy consumption affects significantly the performance of the entire energy network. Therefore, a realistic estimation...

  10. Social obstacles in curbing residential energy demand

    Energy Technology Data Exchange (ETDEWEB)

    Anker-Nilssen, Per [Norwegian School of Management BI, Sandvika (Norway). Centre for Energy and Environment

    2003-07-01

    The continuing growth in residential energy-use does not comply with policy targets for curbing end-user demand. Households are steadily increasing their energy-use, offsetting energy efficiency improvements, to gain time, convenience, comfort and mobility. If sustainable development presupposes lowering demand, it conflicts with present energy-driven changes in life-styles. Environmental degradation due to energy-use gives incentives to raise taxes and duties. The Norwegian experience is that rising income increase households' energy consumption while decreasing its share of total expense. Consequently, higher prices hit low-income households that account for a minor share of total household demand. Since energy represents a purchased input factor to accomplish tasks, the burden is twofold. Energy consumption losses also represent the loss of time and thus money. Additionally, these households have less financial reserves to invest in energy saving. Hence, impact of price hikes (e.g. cold weather) has a regressive social effect. This paper argues that heavy taxation of end-user energy within current practices including tax recycling or deduction, is neither advisable nor politically viable to obtain set targets. Panel data of individual households' electricity use in Oslo suggests that low-income households can not counteract sudden price-hikes but adjust long-term, while the opposite applies to high-income households. In the discussion on environmental policy towards energy-use, the socio-economic effect of measures must be emphasised. New conceptualisations of the world-wide problems in energy and mobility that transforms into agreements on e.g. emission control, can result in added burdens on the poor in industrialised countries rather than the developing countries at large.

  11. Buildings sector demand-side efficiency technology summaries

    Energy Technology Data Exchange (ETDEWEB)

    Koomey, J.G.; Johnson, F.X.; Schuman, J. [and others

    1994-03-01

    This report provides descriptions of the following energy efficiency technologies: energy management systems; electronic fluorescent ballasts; compact fluorescent lamps; lighting controls; room air conditioners; high albedo materials, coatings and paints; solar domestic water heaters; heat pump water heaters; energy-efficient motors; adjustable-speed drives; energy-efficient refrigerators; daylight control glazing; insulating glazing; solar control glazing; switchable glazing; tree planting; and advanced insulation. For each technology, the report provides a description of performance characteristics, consumer utility, development status, technology standards, equipment cost, installation, maintenance, conservation programs, and environmental impacts.

  12. The Demand Side Management Potential to Balance a Highly Renewable European Power System

    Directory of Open Access Journals (Sweden)

    Alexander Kies

    2016-11-01

    Full Text Available Shares of renewables continue to grow in the European power system. A fully renewable European power system will primarily depend on the renewable power sources of wind and photovoltaics (PV, which are not dispatchable but intermittent and therefore pose a challenge to the balancing of the power system. To overcome this issue, several solutions have been proposed and investigated in the past, including storage, backup power, reinforcement of the transmission grid, and demand side management (DSM. In this paper, we investigate the potential of DSM to balance a simplified, fully renewable European power system. For this purpose, we use ten years of weather and historical load data, a power-flow model and the implementation of demand side management as a storage equivalent, to investigate the impact of DSM on the need for backup energy. We show that DSM has the potential to reduce the need for backup energy in Europe by up to one third and can cover the need for backup up to a renewable share of 67%. Finally, it is demonstrated that the optimal mix of wind and PV is shifted by the utilisation of DSM towards a higher share of PV, from 19% to 36%.

  13. Exploring Tradeoffs in Demand-Side and Supply-Side Management of Urban Water Resources Using Agent-Based Modeling and Evolutionary Computation

    Directory of Open Access Journals (Sweden)

    Lufthansa Kanta

    2015-11-01

    Full Text Available Urban water supply systems may be managed through supply-side and demand-side strategies, which focus on water source expansion and demand reductions, respectively. Supply-side strategies bear infrastructure and energy costs, while demand-side strategies bear costs of implementation and inconvenience to consumers. To evaluate the performance of demand-side strategies, the participation and water use adaptations of consumers should be simulated. In this study, a Complex Adaptive Systems (CAS framework is developed to simulate consumer agents that change their consumption to affect the withdrawal from the water supply system, which, in turn influences operational policies and long-term resource planning. Agent-based models are encoded to represent consumers and a policy maker agent and are coupled with water resources system simulation models. The CAS framework is coupled with an evolutionary computation-based multi-objective methodology to explore tradeoffs in cost, inconvenience to consumers, and environmental impacts for both supply-side and demand-side strategies. Decisions are identified to specify storage levels in a reservoir that trigger: (1 increases in the volume of water pumped through inter-basin transfers from an external reservoir; and (2 drought stages, which restrict the volume of water that is allowed for residential outdoor uses. The proposed methodology is demonstrated for Arlington, Texas, water supply system to identify non-dominated strategies for an historic drought decade. Results demonstrate that pumping costs associated with maximizing environmental reliability exceed pumping costs associated with minimizing restrictions on consumer water use.

  14. Research on electricity market operation mechanism and its benefit of demand side participation

    Science.gov (United States)

    Han, Shuai; Yan, Xu; Qin, Li-juan; Lin, Xi-qiao; Zeng, Bo

    2017-08-01

    Demand response plays an important role in maintaining the economic stability of the system, and has the characteristics of high efficiency, low cost, fast response, good environmental benefits and so on. Demand side resource is an important part of electricity market. The research of demand side resources in our country is still in the initial stage, but the opening of the electricity sales side provides a broad prospect for the development of electricity market. This paper summarizes the main types of demand side resources in our country, analyzes the economic principle of demand response from the micro perspective, puts forward some suggestions on the operation mechanism of China’s demand side resources participating in the electricity market under the condition of electricity sales side opening, analyzes the current situation of pricing in the electricity wholesale market and sets up the pricing strategy of the centralized wholesale market with the demand side power supply participating in quotation, which makes the social and economic benefits reach the maximum.

  15. Incentive-compatible demand-side management for smart grids based on review strategies

    Science.gov (United States)

    Xu, Jie; van der Schaar, Mihaela

    2015-12-01

    Demand-side load management is able to significantly improve the energy efficiency of smart grids. Since the electricity production cost depends on the aggregate energy usage of multiple consumers, an important incentive problem emerges: self-interested consumers want to increase their own utilities by consuming more than the socially optimal amount of energy during peak hours since the increased cost is shared among the entire set of consumers. To incentivize self-interested consumers to take the socially optimal scheduling actions, we design a new class of protocols based on review strategies. These strategies work as follows: first, a review stage takes place in which a statistical test is performed based on the daily prices of the previous billing cycle to determine whether or not the other consumers schedule their electricity loads in a socially optimal way. If the test fails, the consumers trigger a punishment phase in which, for a certain time, they adjust their energy scheduling in such a way that everybody in the consumer set is punished due to an increased price. Using a carefully designed protocol based on such review strategies, consumers then have incentives to take the socially optimal load scheduling to avoid entering this punishment phase. We rigorously characterize the impact of deploying protocols based on review strategies on the system's as well as the users' performance and determine the optimal design (optimal billing cycle, punishment length, etc.) for various smart grid deployment scenarios. Even though this paper considers a simplified smart grid model, our analysis provides important and useful insights for designing incentive-compatible demand-side management schemes based on aggregate energy usage information in a variety of practical scenarios.

  16. Cost-effectiveness of trees for demand-side management Washington, DC

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1992-12-01

    Trees can reduce demand for air conditioning to cool buildings by shading residences and lowering summertime air temperatures. During winter, trees can reduce heating needs by lowering wind speeds and thereby reducing infiltration of cold air. On the otherhand, winter shade from improperly located trees can increase heating requirements. Projections from computer simulations indicate that 100 million mature trees in U.S. cities (3 trees for every other single family home) could reduce energy use for heating and cooling by 30 billion kWh and reduce carbon dioxide emissions by as much as 9 million tons per year. This energy analysis is part of a larger study that quantifies costs and benefits of proposed tree plantings in 12 U.S. cities. While energy savings is an important benefit from community forests, other benefits (e.g., air quality improvement, reduced stormwater runoff, increased property values) can have equal or greater value. Tree planting, care, and other costs (e.g., water-sewer line repair, green waste disposal, litigation/liability, program administration) from the cost-benefit study can be used to help estimate costs associated with a tree planting program for demand-side management. Data from this energy analysis should be of direct value to local utilities, urban foresters, planners, landscape designers, and non-profit tree planting groups.

  17. Directed graph based carbon flow tracing for demand side carbon obligation allocation

    DEFF Research Database (Denmark)

    Sun, Tao; Feng, Donghan; Ding, Teng

    2016-01-01

    In order to achieve carbon emission abatement, some researchers and policy makers have cast their focus on demand side carbon abatement potentials. This paper addresses the problem of carbon flow calculation in power systems and carbon obligation allocation at demand side. A directed graph based...... method for tracing carbon flow is proposed. In a lossy network, matrices such as carbon losses, net carbon intensity (NCI) and footprint carbon intensity (FCI) are obtained with the proposed method and used to allocate carbon obligation at demand side. Case studies based on realistic distribution...

  18. Supply-side and demand-side policies for biosimilars: an overview in 10 European member states

    Science.gov (United States)

    Rémuzat, Cécile; Kapuśniak, Anna; Caban, Aleksandra; Ionescu, Dan; Radière, Guerric; Mendoza, Cyril; Toumi, Mondher

    2017-01-01

    ABSTRACT Objective: This study aimed to provide an overview of biosimilar policies in 10 EU MSs. Methods: Ten EU MS pharmaceutical markets (Belgium, France, Germany, Greece, Hungary, Italy, Poland, Spain, Sweden, and the UK) were selected. A comprehensive literature review was performed to identify supply-side and demand-side policies in place in the selected countries. Results: Supply-side policies for biosimilars commonly include price linkage, price re-evaluation, and tendering; the use of internal or external reference pricing varies between countries; health technology assessment is conducted in six countries. Regarding demand-side policies, pharmaceutical prescription budgets or quotas and monitoring of prescriptions (with potential financial incentives or penalties) are in place in eight and in seven countries respectively. Switching is generally allowed, but is solely the physician’s responsibility. Automatic substitution is not recommended, or even forbidden, in most EU MSs. Prescription conditions or guidelines that apply to biosimilars are established in nearly all surveyed EU MSs. Conclusions: Important heterogeneity in policies on biosimilars was seen between (and even within) selected countries, which may partly explain variations in biosimilar uptake. Supply-side policies targeting price have been reported to limit biosimilar penetration in the long term, despite short-term savings, while demand-side policies are considered to positively impact uptake. PMID:28740617

  19. An Enhanced System Architecture for Optimized Demand Side Management in Smart Grid

    Directory of Open Access Journals (Sweden)

    Anzar Mahmood

    2016-04-01

    Full Text Available Demand Side Management (DSM through optimization of home energy consumption in the smart grid environment is now one of the well-known research areas. Appliance scheduling has been done through many different algorithms to reduce peak load and, consequently, the Peak to Average Ratio (PAR. This paper presents a Comprehensive Home Energy Management Architecture (CHEMA with integration of multiple appliance scheduling options and enhanced load categorization in a smart grid environment. The CHEMA model consists of six layers and has been modeled in Simulink with an embedded MATLAB code. A single Knapsack optimization technique is used for scheduling and four different cases of cost reduction are modeled at the second layer of CHEMA. Fault identification and electricity theft control have also been added in CHEMA. Furthermore, carbon footprint calculations have been incorporated in order to make the users aware of environmental concerns. Simulation results prove the effectiveness of the proposed model.

  20. Demand Side Management for Stand-Alone Hybrid Power Systems Based on Load Identification

    Directory of Open Access Journals (Sweden)

    Friederich Kupzog

    2012-11-01

    Full Text Available Within the field of Distributed Generation (DG, stand-alone Hybrid Power Systems (HPS are a suitable solution to provide energy to isolated facilities where the connection to a centralized grid is not affordable. The logical evolution of such systems involves the optimization of power resources and related control strategies, but also enhancements concerning the management of energy loads. This paper introduces Demand Side Management (DSM strategies specially designed for HPS. They are applied on a real and patented HPS that consists of PV panels, a diesel generator, an inverter and a set of batteries. DSM strategies are built up on a framework of distributed endpointdevices connected to a central control application where loads are identified according to their behavior. System network components, load definitions, the control application and DSM strategies are depicted. Finally, simulations show illustrative savings achieved by the application of some of the proposed strategies.

  1. Optimal Demand Response with Energy Storage Management

    OpenAIRE

    Huang, Longbo; Walrand, Jean; Ramchandran, Kannan

    2012-01-01

    In this paper, we consider the problem of optimal demand response and energy storage management for a power consuming entity. The entity's objective is to find an optimal control policy for deciding how much load to consume, how much power to purchase from/sell to the power grid, and how to use the finite capacity energy storage device and renewable energy, to minimize his average cost, being the disutility due to load- shedding and cost for purchasing power. Due to the coupling effect of the...

  2. Strategic Demand-Side Response to Wind Power Integration

    DEFF Research Database (Denmark)

    Daraeepour, Ali; Kazempour, Seyyedjalal; Patiño-Echeverri, Dalia

    2016-01-01

    This paper explores the effects of allowing large, price-responsive consumers to provide reserves in a power system with significant penetration of wind energy. A bilevel optimization model represents the utility maximization problem of a large consumer, subject to a stochastic day-ahead co-optim...

  3. Managing Sustainable Demand-side Infrastructure for Power System Ancillary Services

    Science.gov (United States)

    Parkinson, Simon Christopher

    Widespread access to renewable electricity is seen as a viable method to mitigate carbon emissions, although problematic are the issues associated with the integration of the generation systems within current power system configurations. Wind power plants are the primary large-scale renewable generation technology applied globally, but display considerable short-term supply variability that is difficult to predict. Power systems are currently not designed to operate under these conditions, and results in the need to increase operating reserve in order to guarantee stability. Often, operating conventional generation as reserve is both technically and economically inefficient, which can overshadow positive benefits associated with renewable energy exploitation. The purpose of this thesis is to introduce and assess an alternative method of enhancing power system operations through the control of electric loads. In particular, this thesis focuses on managing highly-distributed sustainable demand-side infrastructure, in the form of heat pumps, electric vehicles, and electrolyzers, as dispatchable short-term energy balancing resources. The main contribution of the thesis is an optimal control strategy capable of simultaneously balancing grid- and demand-side objectives. The viability of the load control strategy is assessed through model-based simulations that explicitly track end-use functionality of responsive devices within a power systems analysis typically implemented to observe the effects of integrated wind energy systems. Results indicate that there is great potential for the proposed method to displace the need for increased reserve capacity in systems considering a high penetration of wind energy, thereby allowing conventional generation to operate more efficiently and avoid the need for possible capacity expansions.

  4. Demand side management in recycling and electricity retail pricing

    Science.gov (United States)

    Kazan, Osman

    This dissertation addresses several problems from the recycling industry and electricity retail market. The first paper addresses a real-life scheduling problem faced by a national industrial recycling company. Based on their practices, a scheduling problem is defined, modeled, analyzed, and a solution is approximated efficiently. The recommended application is tested on the real-life data and randomly generated data. The scheduling improvements and the financial benefits are presented. The second problem is from electricity retail market. There are well-known patterns in daily usage in hours. These patterns change in shape and magnitude by seasons and days of the week. Generation costs are multiple times higher during the peak hours of the day. Yet most consumers purchase electricity at flat rates. This work explores analytic pricing tools to reduce peak load electricity demand for retailers. For that purpose, a nonlinear model that determines optimal hourly prices is established based on two major components: unit generation costs and consumers' utility. Both are analyzed and estimated empirically in the third paper. A pricing model is introduced to maximize the electric retailer's profit. As a result, a closed-form expression for the optimal price vector is obtained. Possible scenarios are evaluated for consumers' utility distribution. For the general case, we provide a numerical solution methodology to obtain the optimal pricing scheme. The models recommended are tested under various scenarios that consider consumer segmentation and multiple pricing policies. The recommended model reduces the peak load significantly in most cases. Several utility companies offer hourly pricing to their customers. They determine prices using historical data of unit electricity cost over time. In this dissertation we develop a nonlinear model that determines optimal hourly prices with parameter estimation. The last paper includes a regression analysis of the unit generation cost

  5. Optimal Demand Response with Energy Storage Management

    CERN Document Server

    Huang, Longbo; Ramchandran, Kannan

    2012-01-01

    In this paper, we consider the problem of optimal demand response and energy storage management for a power consuming entity. The entity's objective is to find an optimal control policy for deciding how much load to consume, how much power to purchase from/sell to the power grid, and how to use the finite capacity energy storage device and renewable energy, to minimize his average cost, being the disutility due to load- shedding and cost for purchasing power. Due to the coupling effect of the finite size energy storage, such problems are challenging and are typically tackled using dynamic programming, which is often complex in computation and requires substantial statistical information of the system dynamics. We instead develop a low-complexity algorithm called Demand Response with Energy Storage Management (DR-ESM). DR-ESM does not require any statistical knowledge of the system dynamics, including the renewable energy and the power prices. It only requires the entity to solve a small convex optimization pr...

  6. Controlling Energy Demand in Mobile Computing Systems

    CERN Document Server

    Ellis, Carla

    2007-01-01

    This lecture provides an introduction to the problem of managing the energy demand of mobile devices. Reducing energy consumption, primarily with the goal of extending the lifetime of battery-powered devices, has emerged as a fundamental challenge in mobile computing and wireless communication. The focus of this lecture is on a systems approach where software techniques exploit state-of-the-art architectural features rather than relying only upon advances in lower-power circuitry or the slow improvements in battery technology to solve the problem. Fortunately, there are many opportunities to i

  7. Experimental determination of demand side management potential of wet appliances in the Netherlands

    NARCIS (Netherlands)

    Staats, M. R.; de Boer-Meulman, P. D M; van Sark, W. G J H M

    2017-01-01

    The potential of demand side management (DSM) of wet appliances (washing machine, dishwasher and tumble dryer) in households with photovoltaic (PV) systems is studied experimentally focusing on evening peak demand reduction and increase in PV self-consumption. In a sample of 100 Dutch households the

  8. Experimental determination of demand side management potential of wet appliances in the Netherlands

    NARCIS (Netherlands)

    Staats, M. R.; de Boer-Meulman, P. D M; van Sark, W. G J H M

    2017-01-01

    The potential of demand side management (DSM) of wet appliances (washing machine, dishwasher and tumble dryer) in households with photovoltaic (PV) systems is studied experimentally focusing on evening peak demand reduction and increase in PV self-consumption. In a sample of 100 Dutch households the

  9. A System Architecture for Autonomous Demand Side Load Management in Smart Buildings

    DEFF Research Database (Denmark)

    Costanzo, Giuseppe Tommaso; Zhu, Guchuan; Anjos, Miguel F.

    2012-01-01

    This paper presents a system architecture for load management in smart buildings which enables autonomous demand side load management in the smart grid. Being of a layered structure composed of three main modules for admission control, load balancing, and demand response management...

  10. Energy demand analysis in the workshop on alternative energy strategies

    Energy Technology Data Exchange (ETDEWEB)

    Carhart, S C

    1978-04-01

    The Workshop on Alternative Energy Strategies, conducted from 1974 through 1977, was an international study group formed to develop consistent national energy alternatives within a common analytical framework and global assumptions. A major component of this activity was the demand program, which involved preparation of highly disaggregated demand estimates based upon estimates of energy-consuming activities and energy requirements per unit of activity reported on a consistent basis for North America, Europe, and Japan. Comparison of the results of these studies reveals that North America requires more energy per unit of activity in many consumption categories, that major improvements in efficiency will move North America close to current European and Japanese efficiencies, and that further improvements in European and Japanese efficiencies may be anticipated as well. When contrasted with expected availabilities of fuels, major shortfalls of oil relative to projected demands emerge in the eighties and nineties. Some approaches to investment in efficiency improvements which will offset these difficulties are discussed.

  11. Optimal Multi-scale Demand-side Management for Continuous Power-Intensive Processes

    Science.gov (United States)

    Mitra, Sumit

    With the advent of deregulation in electricity markets and an increasing share of intermittent power generation sources, the profitability of industrial consumers that operate power-intensive processes has become directly linked to the variability in energy prices. Thus, for industrial consumers that are able to adjust to the fluctuations, time-sensitive electricity prices (as part of so-called Demand-Side Management (DSM) in the smart grid) offer potential economical incentives. In this thesis, we introduce optimization models and decomposition strategies for the multi-scale Demand-Side Management of continuous power-intensive processes. On an operational level, we derive a mode formulation for scheduling under time-sensitive electricity prices. The formulation is applied to air separation plants and cement plants to minimize the operating cost. We also describe how a mode formulation can be used for industrial combined heat and power plants that are co-located at integrated chemical sites to increase operating profit by adjusting their steam and electricity production according to their inherent flexibility. Furthermore, a robust optimization formulation is developed to address the uncertainty in electricity prices by accounting for correlations and multiple ranges in the realization of the random variables. On a strategic level, we introduce a multi-scale model that provides an understanding of the value of flexibility of the current plant configuration and the value of additional flexibility in terms of retrofits for Demand-Side Management under product demand uncertainty. The integration of multiple time scales leads to large-scale two-stage stochastic programming problems, for which we need to apply decomposition strategies in order to obtain a good solution within a reasonable amount of time. Hence, we describe two decomposition schemes that can be applied to solve two-stage stochastic programming problems: First, a hybrid bi-level decomposition scheme with

  12. Communications technologies for demand side management, DSM, and European utility communications architecture, EurUCA

    Energy Technology Data Exchange (ETDEWEB)

    Kaerkkaeinen, S.; Kekkonen, V. [VTT Energy, Espoo (Finland); Rissanen, P. [Tietosavo Oy (Finland)

    1996-12-31

    In this project the main target is to develop and assess methods for DSM (Demand Side Management) and distribution automation planning from the utility`s point of view. The final goal is to integrate these methods for the strategic planning of electric utilities. In practice the project is divided into four main parts: The development and assessment of DSM/IRP planning methods and cost/benefit analysis as a part of international co-operation (IEA DSM Agreement: Annex IV, European Cost/Benefit analysis of DSM, EUBC, and Finnish SAVE-project started in 1995 in co-operation with SRC International and six electric utilities in Finland); Development of PC-based DSM planning and assessment tools at VTT; Development of a decision support system of distribution network planning including DSM options at Tietosavo Oy and Integration of DSM planning and network planning tools in co-operation with VTT Energy and Tietosavo Oy

  13. Demand-side bidding in Brazil; Leilao de eficiencia energetica no Brasil

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, Agenor Gomes Pinto

    2008-01-15

    Since the New Electric Sector Model's conception an energy-efficiency auction, like the ones used to buy new energy, was considered. Recently, the subject has been frequently commented in studies and meetings. This thesis discuss the main issues about its implementation in Brazil and proposes a model for this. The first chapter shows the history and the Electric Sector actual frame, with emphasis in the energy planning, resumed after the 2001 electricity shortage, the structure created for the system expansion and analyses the results of the new energy's auctions until now. The second chapter studies how the energy-efficiency auction can affect agents and consumers and presents the auction theory, which is growing fast in recent years, and how it can be applied to the present case, showing the possible agents' behavior - ESCOs, larger consumers and appliance manufacturers, and its implication on the auction shape. The third chapter shows the past world experience in energy-efficiency selling - the USA DSB (demand-side bidding) and its actual results and an IEA (International Energy Agency) study about this market mechanism of energy-efficiency promotion. 'The DSB works but it's not simple' (Geller, 2006) sums up the main conclusion about DSB - it develops the M and V techniques and the ESCO industry, making energy-efficiency as good as new generation for system's growing. The fourth chapter presents a proposal for the energy-efficiency auction's implementation in Brazil - its opportunity, resources source, regional aspects and the steps to get there. The fifth chapter analyses the M and V 's techniques and shows examples of the four options for projects - the M and V is essential for the auction success and its development, on the other hand, can leverage the energy-efficiency market in Brazil. Finally, the last chapter concludes that the energy-efficiency auction can make a great contribution for energy efficiency and

  14. 混合功能发展与需求侧供能--高密度亚洲城市中心区再发展的节能契机%Mixed Function Development And Demand-Side Energy Supply Energy Saving Opportunity Of High Density Asia City Center Area Redevelopment

    Institute of Scientific and Technical Information of China (English)

    黄林琳

    2015-01-01

    Under condition of energy-saving emission reduction promoting the city urbanization is a major topic in our country. This article tries to analyze correlation from the land use and energy usage types, based on demand-side energy supply modes, such as rapid development efficient use of waste heat in recent years (CCHP or DES) as technical conditions, from energy efficiency to explore energy saving opportunity of high density Asia city center area redevelopment, in order to achieve final maximization of architecture infrastructure service, minimization of urban activities consumption resources and diversification of residents activity types, new mixed function development theory model–EEOD( energy efficiency-oriented development mode).%在节能减排的前提下推进城市化进程是我国当前面临的重大课题。该文尝试从土地利用与用能类型之间的相关性入手,以近年来快速发展的以高效利用余热为特色的需求侧供能模式(CCHP或DES)为技术条件,从能效出发发掘高密度亚洲城市中心区的节能契机,最终架构基础设施服务范围最大化、城市活动消耗资源最小化、居民活动类型多样化的新型“混合功能发展”理论模式——EEOD。

  15. THE DILEMMA OF DEMAND SIDE POLICIES VERSUS SUPPLY SIDE POLICIES FOR RELAUNCHING CAPITALIST ECONOMIES

    Directory of Open Access Journals (Sweden)

    PETRE PRISECARU

    2014-11-01

    Full Text Available The first important economic recession in this century started in USA with the burst of real estate bubble followed by the bankruptcy of some investment and commercial banks and the collapse of capital market. The financial-banking crisis spilt over the world economy and caused the second deepest economic recession in the last 80 years. The financial crisis has badly affected almost all market economies and was the result of a combination between market failures and mistakes made in macroeconomic policies. In the financial sector there was not enough regulation and supervision of corporate governance while in goods industry the pressure of over-regulation led to higher factor costs and supply contraction. The direct result of supply side policies and particularly of monetarist instruments is seen now clearly in the USA: large deficits, huge debts, reduced savings, heavy dependence on foreign money (capital and resources, relatively low domestic output and supply.

  16. Exploring Community-Oriented Approaches in Demand Side Management Projects in Europe

    Directory of Open Access Journals (Sweden)

    Anna Mengolini

    2016-12-01

    Full Text Available This paper seeks to investigate if the theoretical and political trends towards a more collective dimension of energy use are reflected in the design and development of demand side management (DSM pilot projects in Europe. Specifically, the paper analyses DSM projects in the database of the Joint Research Centre (JRC of the European Commission to capture signs of a new attention towards the wider context in which consumers live and towards the social dimension associated with energy consumption. To this end, the paper investigates the projects’ scope (in terms of project’s partners, end-use sectors and targeted services as well as the consumer engagement strategies that projects use. These elements reflect the projects’ consideration for the socio-economic dimension of the community where the pilots take place and their inclination to build on community dynamics. The analysis shows that DSM projects in the EU are increasingly being designed and developed with a collegial approach to energy consumption in mind, although an integrated approach is still missing. In addition, research is still needed to link the use of this innovative approach to project results. A closer look at the developments and results of these projects can help to identify what works and what doesn’t in real life experiences, thus supporting effective policy making at the EU and national level.

  17. The past, present, and future of U.S. utility demand-side management programs

    Energy Technology Data Exchange (ETDEWEB)

    Eto, J. [Lawrence Berkeley National Lab., CA (United States). Environmental Energy Technologies Div.

    1996-12-01

    Demand-side management or DSM refers to active efforts by electric and gas utilities to modify customers` energy use patterns. The experience in the US shows that utilities, when provided with appropriate incentives, can provide a powerful stimulus to energy efficiency in the private sector. This paper describes the range and history of DSM programs offered by US electric utilities, with a focus on the political, economic, and regulatory events that have shaped their evolution. It also describes the changes these programs are undergoing as a result of US electricity industry restructuring. DSM programs began modestly in the 1970s in response to growing concerns about dependence on foreign sources of oil and environmental consequences of electricity generation, especially nuclear power. The foundation for the unique US partnership between government and utility interests can be traced first to the private-ownership structure of the vertically integrated electricity industry and second to the monopoly franchise granted by state regulators. Electricity industry restructuring calls into question both of these basic conditions, and thus the future of utility DSM programs for the public interest. Future policies guiding ratepayer-funded energy-efficiency DSM programs will need to pay close attention to the specific market objectives of the programs and to the balance between public and private interests.

  18. Energy demand on dairy farms in Ireland.

    Science.gov (United States)

    Upton, J; Humphreys, J; Groot Koerkamp, P W G; French, P; Dillon, P; De Boer, I J M

    2013-10-01

    Reducing electricity consumption in Irish milk production is a topical issue for 2 reasons. First, the introduction of a dynamic electricity pricing system, with peak and off-peak prices, will be a reality for 80% of electricity consumers by 2020. The proposed pricing schedule intends to discourage energy consumption during peak periods (i.e., when electricity demand on the national grid is high) and to incentivize energy consumption during off-peak periods. If farmers, for example, carry out their evening milking during the peak period, energy costs may increase, which would affect farm profitability. Second, electricity consumption is identified in contributing to about 25% of energy use along the life cycle of pasture-based milk. The objectives of this study, therefore, were to document electricity use per kilogram of milk sold and to identify strategies that reduce its overall use while maximizing its use in off-peak periods (currently from 0000 to 0900 h). We assessed, therefore, average daily and seasonal trends in electricity consumption on 22 Irish dairy farms, through detailed auditing of electricity-consuming processes. To determine the potential of identified strategies to save energy, we also assessed total energy use of Irish milk, which is the sum of the direct (i.e., energy use on farm) and indirect energy use (i.e., energy needed to produce farm inputs). On average, a total of 31.73 MJ was required to produce 1 kg of milk solids, of which 20% was direct and 80% was indirect energy use. Electricity accounted for 60% of the direct energy use, and mainly resulted from milk cooling (31%), water heating (23%), and milking (20%). Analysis of trends in electricity consumption revealed that 62% of daily electricity was used at peak periods. Electricity use on Irish dairy farms, therefore, is substantial and centered around milk harvesting. To improve the competitiveness of milk production in a dynamic electricity pricing environment, therefore, management

  19. Supply shortage forecast in Ontario: The significance of demand-side management (DSM); its tools and techniques

    Energy Technology Data Exchange (ETDEWEB)

    Saini, S.

    2004-06-01

    Aspects of the recent report by the Ontario Electricity Conservation and Supply Task Force and Independent Market Operator which forecasts acute power supply shortages in Ontario, are discussed. Immediate action is recommended to avert the problem. The principal recommendation concerns the adoption of Demand Side Management as a tool to reduce the widening gap between supply and demand, citing supply shortage, imports, high prices, deregulated market and environmental concerns as the driving forces which push for the adoption of DSM. It is claimed that DSM, through its tools such as Demand/Load Response Programs and Time-of-Use rates has the capacity to create the necessary balance between supply and demand more efficiently, and in a more timely fashion than supply side management. The demand for adoption of DSM is justified on the basis of a careful examination of the magnitude and significance of each of the driving forces affecting the electricity supply in Ontario, as well as the benefits and techniques of DSM designed to manage power shortages. Energy Conservation and Efficiency and Demand/Load Response Programs are discussed as the principal DSM techniques, while Dynamic/Real Time Pricing, Time-of-Use Rates, Automated /Smart Metering, Web-based/Communication Systems, Reliability-based Programs, Market/Price-based programs, and Types of Load Control are described as the principal tools used by DSM. DSM program approaches and strategies are also reviewed, along with a brief list of successful examples of DSM applications. 3 figs.

  20. Linking meters and markets: Roles and incentives to support a flexible demand side

    DEFF Research Database (Denmark)

    Katz, Jonas

    2014-01-01

    participants. The roll-out of smart metering to electricity consumers is an important precondition to establishing a flexible demand side and will provide essential information flows. On the basis of current incentive structures and related risks, however, the pass-through of information and value from...... wholesale market participants to the demand side is mostly infeasible, resulting in flexibility tasks being aggregated and delegated to balancing responsible wholesale traders. This analysis focuses on whether current incentives and roles are appropriate and where the design could be improved to establish...... a flexible demand side with a particular focus on the Danish case. Design-related barriers are identified that affect expected value, associated risks, and the distribution of responsibilities. This serves as a basis to define policy options in the context of Nordic electricity markets. © 2014 Elsevier Ltd...

  1. Visualising the Global Shift in Energy Demand and Supply

    OpenAIRE

    Muhammad Isma'il

    2012-01-01

    The global energy demand depends on supplies from fossil fuels responsible for climate change. The supply of the fossil fuels required to meet the global energy demand depends on production from the available proved reserves of oil, coal and gas unevenly distributed around the world. On the other hand, the energy demand of a country is determined by its economic growth and population dynamics. The industrialised nations accounted for the rising demand in global primary energy. However, a glob...

  2. Load curve modelling of the residential segment electric power consumption applying a demand side energy management program; Modelagem da curva de carga das faixas de consumo de energia eletrica residencial a partir da aplicacao de um programa de gerenciamento de energia pelo lado da demanda

    Energy Technology Data Exchange (ETDEWEB)

    Rahde, Sergio Barbosa [Pontificia Univ. Catolica do Rio Grande do Sul, Porto Alegre (Brazil). Dept. de Engenharia Mecanica e Mecatronica]. E-mail: sergio@em.pucrs.br; Kaehler, Jose Wagner [Pontificia Univ. Catolica do Rio Grande do Sul, Porto Alegre (Brazil). Faculdade de Engenharia]. E-mail: kaehlerjw@pucrs.br

    2000-07-01

    The dissertation aims to offer a current vision on the use of electrical energy inside CEEE's newly defined area of operation. It also intends to propose different alternatives to set up a Demand Side Management (DSM) project to be carried out on the same market segment, through a Residential Load Management program. Starting from studies developed by DNAEE (the Brazilian federal government's agency for electrical energy), to establish the load curve characteristics, as well as from a research on electrical equipment ownership and electricity consumption habits, along with the contribution supplied by other utilities, especially in the US, an evaluation is offered, concerning several approaches to residential energy management, setting up conditions that simulate the residential segment's scenarios and their influence on the general system's load. (author)

  3. Challenges of using model predictive control for active demand side management

    OpenAIRE

    Zong, Yi; You, Shi; Hu, Junjie; Han, Xue; Jiang, Chongxi; Zhang, Yi; Böning, Georg Martin

    2015-01-01

    When there is a high penetration of renewables in the power system, it requires coordinated management of large numbers of distributed and demand response resources, intermittent resources to maintain the grid reliability and improve operational economics. This paper presents a hierarchical architecture design for Model Predictive Controller (MPC), and discusses the challenges encountered during the implementation of MPC for active demand side management. The two different pilot case studies ...

  4. A future Demand Side Management (DSM) opportunity for utility as variable renewable penetrate scale up using agriculture.

    Science.gov (United States)

    Ines, A.; Bhattacharjee, A.; Modi, V.; Robertson, A. W.; Lall, U.; Kocaman Ayse, S.; Chaudhary, S.; Kumar, A.; Ganapathy, A.; Kumar, A.; Mishra, V.

    2015-12-01

    Energy demand management, also known as demand side management (DSM), is the modification of consumer demand for energy through various methods such as smart metering, incentive based schemes, payments for turning off loads or rescheduling loads. Usually, the goal of demand side management is to encourage the consumer to use less power during periods of peak demand, or to move the time of energy use to off-peak times. Peak demand management does not necessarily decrease total energy consumption, but could be expected to reduce the need for investments in networks and/or power plants for meeting peak demands. Electricity use can vary dramatically on short and medium time frames, and the pricing system may not reflect the instantaneous cost as additional higher-cost that are brought on-line. In addition, the capacity or willingness of electricity consumers to adjust to prices by altering elasticity of demand may be low, particularly over short time frames. In the scenario of Indian grid setup, the retail customers do not follow real-time pricing and it is difficult to incentivize the utility companies for continuing the peak demand supply. A question for the future is how deeper penetration of renewable will be handled? This is a challenging problem since one has to deal with high variability, while managing loss of load probabilities. In the case of managing the peak demand using agriculture, in the future as smart metering matures with automatic turn on/off for a pump, it will become possible to provide an ensured amount of water or energy to the farmer while keeping the grid energized for 24 hours. Supply scenarios will include the possibility of much larger penetration of solar and wind into the grid. While, in absolute terms these sources are small contributors, their role will inevitably grow but DSM using agriculture could help reduce the capital cost. The other option is of advancing or delaying pump operating cycle even by several hours, will still ensure

  5. The demand-side management program development process: A utility perspective

    Energy Technology Data Exchange (ETDEWEB)

    Wolfe, A.K. [Oak Ridge National Lab., TN (United States); Yourstone, N.E. [Yourstone (Evelin), Albuquerque, NM (United States)

    1992-03-01

    This report describes an aspect of DSM that has received little attention, namely, how utilities develop DSM programs. The selection of utilities to study purposely was biased in favor of those with reputations for being experienced DSM program developers so as to optimize the chances to obtain detailed information. The DSM planning process is affected by organizational factors and external influences: (1) the location of the demand-side planning department within the utility; (2) the demand-side planning group`s functional responsibilities; (3) upper management participation in the DSM program development process; and (4) the organizational relationship between (or, separation of) supply-side and demand-side planning. Organizational factors reflect utilities` views of DSM programs and thus can affect the adoption of a technology- or customer-oriented approach. Despite repeated claims of the uniqueness of the demand- side planning process and its resistance to standardization, two general approaches to program development were discerned, namely technology- or customer-orientation. Although utilities consider customer related and technological factors in their DSM program development process, utilities can be differentiated by their emphasis on one or the other approach. 25 refs.

  6. The demand-side management program development process: A utility perspective

    Energy Technology Data Exchange (ETDEWEB)

    Wolfe, A.K. (Oak Ridge National Lab., TN (United States)); Yourstone, N.E. (Yourstone (Evelin), Albuquerque, NM (United States))

    1992-03-01

    This report describes an aspect of DSM that has received little attention, namely, how utilities develop DSM programs. The selection of utilities to study purposely was biased in favor of those with reputations for being experienced DSM program developers so as to optimize the chances to obtain detailed information. The DSM planning process is affected by organizational factors and external influences: (1) the location of the demand-side planning department within the utility; (2) the demand-side planning group's functional responsibilities; (3) upper management participation in the DSM program development process; and (4) the organizational relationship between (or, separation of) supply-side and demand-side planning. Organizational factors reflect utilities' views of DSM programs and thus can affect the adoption of a technology- or customer-oriented approach. Despite repeated claims of the uniqueness of the demand- side planning process and its resistance to standardization, two general approaches to program development were discerned, namely technology- or customer-orientation. Although utilities consider customer related and technological factors in their DSM program development process, utilities can be differentiated by their emphasis on one or the other approach. 25 refs.

  7. Dynamic energy-demand models. A comparison

    Energy Technology Data Exchange (ETDEWEB)

    Yi, Feng [Department of Economics, Goeteborg University, Gothenburg (Sweden)

    2000-04-01

    This paper compares two second-generation dynamic energy demand models, a translog (TL) and a general Leontief (GL), in the study of price elasticities and factor substitutions of nine Swedish manufacturing industries: food, textiles, wood, paper, printing, chemicals, non-metallic minerals, base metals and machinery. Several model specifications are tested with likelihood ratio test. There is a disagreement on short-run adjustments; the TL model accepts putty-putty production technology of immediate adjustments, implying equal short- and long-run price elasticities of factors, while the GL model rejects immediate adjustments, giving out short-run elasticities quite different from the long-run. The two models also disagree in substitutability in many cases. 21 refs.

  8. Industrial demand-side management programs: What`s happened, what works, what`s needed

    Energy Technology Data Exchange (ETDEWEB)

    Jordan, J.A.; Nadel, S.M. [American Council for an Energy-Efficient Economy, Washington, DC (United States)

    1993-03-01

    In order to analyze experience to date with industrial demand-side management (DSM), a survey of utilities was conducted and a database of industrial DSM programs was prepared. More than eighty utilities and third-party organizations were interviewed. Data were collected via phone, fax, and/or mail from the utilities and entered into a database. In order to limit the scope of this study, the database contains incentive-based, energy-saving programs and not load management or information-only programs (including technical assistance programs). Programs in the database were divided into four categories: two ``prescriptive rebate`` categories and two ``custom rebate`` categories. The database contains 31 incentive-based, energy-saving industrial DSM programs offered by 17 utilities. The appendix to this report summarizes the results approximately 60 industrial DSM programs. Most of the programs included in the appendix, but not in the database, are either C&I programs for which commercial and industrial data were not disaggregated or new industrial DSM programs for which data are not yet available.

  9. An Overview of Demand Side Management Control Schemes for Buildings in Smart Grids

    DEFF Research Database (Denmark)

    Kosek, Anna Magdalena; Costanzo, Giuseppe Tommaso; Bindner, Henrik W.

    2013-01-01

    of the power sector in mind and thus can differ significantly in their architecture, their integration into the various markets, their integration into distribution network operation and several other aspects. This paper proposes a classification of load control policies for demand side management in smart...

  10. An analysis of the factors influencing demand-side management activity in the electric utility industry

    Science.gov (United States)

    Bock, Mark Joseph

    Demand-side management (DSM), defined as the "planning, implementation, and monitoring of utility activities designed to encourage consumers to modify their pattern of electricity usage, including the timing and level of electricity demand," is a relatively new concept in the U.S. electric power industry. Nevertheless, in twenty years since it was first introduced, utility expenditures on DSM programs, as well as the number of such programs, have grown rapidly. At first glance, it may seem peculiar that a firm would actively attempt to reduce demand for its primary product. There are two primary explanations as to why a utility might pursue DSM: regulatory mandate, and self-interest. The purpose of this dissertation is to determine the impact these influences have on the amount of DSM undertaken by utilities. This research is important for two reasons. First, it provides insight into whether DSM will continue to exist as competition becomes more prevalent in the industry. Secondly, it is important because no one has taken a comprehensive look at firm-level DSM activity on an industry-wide basis. The primary data set used in this dissertation is the U.S. Department of Energy's Annual Electric Utility Report, Form EIA-861, which represents the most comprehensive data set available for analyzing DSM activity in the U.S. There are four measures of DSM activity in this data set: (1) utility expenditures on DSM programs; (2) energy savings by DSM program participants; and (3) the actual and (4) the potential reductions in peak load resulting from utility DSM measures. Each is used as the dependent variable in an econometric analysis where independent variables include various utility characteristics, regulatory characteristics, and service territory and customer characteristics. In general, the results from the econometric analysis suggest that in 1993, DSM activity was primarily the result of regulatory pressure. All of the evidence suggests that if DSM continues to

  11. Economic Optimization and Corresponding Algorithm for Distributed Energy System Compatible With Demand-Side Resources%兼容需求侧可调控资源的分布式能源系统经济优化运行及其求解算法

    Institute of Scientific and Technical Information of China (English)

    曾鸣; 彭丽霖; 孙静惠; 刘伟; 武赓

    2016-01-01

    Starting with research on distributed energy system optimization, this paper builds an economic optimization operation model for distributed energy system considering controllable load resources on demand side. The model involves electric, heating and cooling loads. Secondly, to solve multi-objective nonlinear optimization problem, it proposes quantum fireworks algorithm (QFA). Finally, the proposed model and solution algorithm are applied to an actual case of distributed energy system in Northwest China. The result shows that total system cost is reduced by about 6.17% when distributed energy system is involved in demand-side load management. In addition, the result verifies validity and feasibility of QFA in solving this type of problem.%从分布式能源系统的优化研究着手,建立了兼容需求侧可调控资源的分布式能源系统经济优化运行模型,充分考虑了分布式能源系统中的电负荷、热负荷和冷负荷。其次,为能够解决上述多目标、非线性优化问题,提出了量子烟花算法(quantum fireworks algorithm,QFA)。最后,将所提出的模型及求解算法应用于我国西北地区某分布式能源系统的实际算例中,仿真结果表明:当分布式能源系统参与需求侧负荷优化管理时,系统总成本减少约6.17%;此外,验证了QFA算法求解此类问题的可行性。

  12. Advanced monitoring technologies for the evaluation of demand-side management programs

    Energy Technology Data Exchange (ETDEWEB)

    De Almeida, A.T. [Coimbra Univ. (Portugal). Dept. of Electrical Engineering; Vine, E.L.

    1993-06-01

    This report was commissioned by the California Institute for Energy Efficiency as part of its research mission to advance the energy efficiency and productivity of all end-use sectors in California. The aim of this study is to provide an assessment of the state-of-the-art technologies that can be used for monitoring and evaluating demand-side management (DSM) programs. Additionally, the study points out research, development, and demonstration projects whose implementation can contribute to a more accurate and cost-effective evaluation of the performance of end-use technologies. During the past two decades, technology developments in the fields of microelectronics, computers and communications had a large impact on monitoring equipment. The improvements achieved led to the appearance of increasingly powerful, convenient to use, and flexible equipment, enabling a wider application of end-use metering at a lower cost. Equipment specifications are getting closer and closer to an ``ideal`` monitoring system: Good accuracy, high reliability, moderate cost, large number of monitored end uses, large data storage capacity, flexible communications, non-intrusiveness, powerful preprocessing of data. This report briefly examines the following techniques that can be used for end-use monitoring: field test equipment, general purpose data loggers, run-time data loggers, utility-oriented data loggers, energy management systems, two-way communication, power line carrier techniques, direct and distributed load control, and non-intrusive load monitoring. The report concludes with recommendations for developing new measurement technologies, as well as additional research and development activities to support these efforts.

  13. SmartBuildings. Implementation of demand-side-management systems; SmartBuildings. Implementierung von Lastmanagementsystemen

    Energy Technology Data Exchange (ETDEWEB)

    Jungwirth, Johannes; Saenger, Florian; Grahovac, Milica [TU Muenchen (Germany). Lehrstuhl fuer Energiewirtschaft und Anwendungstechnik; Roessel, Timm; Schneegans, Jakob; Herzog, Simon [TU Muenchen (Germany). Lehrstuhl fuer Bauklimatik und Haustechnik; Mikulovic, Vesna [Siemens Building Technologies Headquarters, Zug (Switzerland)

    2012-07-01

    A transition to flexible consumer load can contribute significantly to the integration of renewable energies. Precisely controllable electrical consumers from the building sector (heating, ventilation, air conditioning) are applicable for demand-side-management by using the thermal inertia of the building. In order to incentivize a load shift scenarios of flexible electricity rates are developed. Flexible users can shift their operation to times of lower prices and therefore minimize their electricity costs. Within a simulation of the building and the building services the impact of modified operation mode on thermal comfort of the room is analyzed and times of operation are optimized. The implementation of resulting theoretical potential of a load shift in a real building necessitates a simulation model of the building. Since the creation of these models is very complex, universally applicable adaptive models of the buildings are developed. After a training process those adaptive models have acquired the skill to predict the building behaviour. Now they are able to forecast effects of various modes of operation and provide a cost-optimized operation schedule for building technology. Neural networks used to build adaptive models deliver promising results. However, initial measurements and training periods are to be optimized. (orig.)

  14. Vaccine demand driven by vaccine side effects: dynamic implications for SIR diseases.

    Science.gov (United States)

    d'Onofrio, Alberto; Manfredi, Piero

    2010-05-21

    For infections for which the perceived risk of serious disease is steadily low, the perceived risk of suffering some vaccine side effects might become the driving force of the vaccine demand. We investigate the dynamics of SIR infections in homogeneously mixing populations where the vaccine uptake is a decreasing function of the current (or past) incidence, or prevalence, of vaccine side effects. We define an appropriate model where vaccine side-effects are modelled as functions of the age since vaccination. It happens that the vaccine uptake follows its own dynamics independent of epidemiological variables. We show the conditions under which the vaccine uptake lands on a globally stable equilibrium, or steadily oscillates, and the implications of such behaviour for the dynamics of epidemiological variables. We finally report some unexpected scenarios caused by trends in vaccine side effects.

  15. Negotiating a demand side bid: City of San Jose case study

    Energy Technology Data Exchange (ETDEWEB)

    1993-06-01

    This report emphasizes the transferability of the gathered information to other local municipal governments. The report provides: general background information on demand side bidding; advantages and disadvantages of participation; alternative and ``ideal`` scenarios for bidding; review of potential pitfalls and lessons learned; and a general framework of information based on this particular request for DSB proposals and the City of San Joe`s response experience.

  16. Analyzing demand-side efficiency in global health: an application to maternal care in Vietnam.

    Science.gov (United States)

    Radin, Elizabeth; Ariana, Proochista; Broekel, Tom; Tran, Toan Khanh

    2016-11-01

    This article investigates demand-side efficiency in global health-or the efficiency with which health system users convert public health resources into health outcomes. We introduce and explain the concept of demand-side efficiency as well as quantitative methods to empirically estimate it. Using a robust nonparametric form of technical efficiency analysis, we estimate demand side efficiency and its social determinants. We pilot these methods looking at how efficiently pregnant women in Northern Vietnam convert public health resources into appropriate maternal care as defined by national policy. We find that women who live in non-mountainous geographies, who are formally employed, who are pregnant with a boy and who are ethnic minorities are all more likely to be efficient at achieving appropriate care. We find no significant association between wealth or education and efficiency. Our results suggest that, in the Vietnamese context, women who are the most likely to achieve appropriate maternal care, are not necessarily the most likely to do so efficiently. Women who live in non-mountainous geographies and who are formally employed are both more likely to achieve appropriate care and to do so efficiently. Yet ethnic minority women, who do not systematically achieve better care, are more likely to be efficient or to achieve better care when compared with those with the same endowment of public health resources. On the methodological level, the pilot highlights that this approach can provide useful information for policy by identifying which groups of people are more and less likely to be efficient. By understanding which groups are more likely to be efficient-and in turn how and why-it may be possible to devise policies to promote the drivers of, or conversely address the constraints to, optimizing demand-side efficiency.

  17. Demand-Side Management and Integrated Resource Planning: Findings from a Survey of 24 Electric Utilities

    Energy Technology Data Exchange (ETDEWEB)

    Schweitzer, M.

    1991-01-01

    Integrated resource planning differs from traditional utility planning practices primarily in its increased attention to demand-side management (DSM) programs and its integration of supply- and demand-side resources into a combined resource portfolio. This report details the findings from an Oak Ridge National Laboratory (ORNL) survey of 24 electric utilities that have well-developed integrated planning processes. These utilities account for roughly one-third of total capacity, electricity generation, and DSM-program expenditures nationwide. The ORNL survey was designed to obtain descriptive data on a national sample of utilities and to test a number of hypothesized relationships between selected utility characteristics and the mix of resources selected for the integrated plan, with an emphasis on the use of DSM resources and the processes by which they are chosen. The survey solicited information on each utility's current and projected resource mix, operating environment, procedures used to screen potential DSM resources, techniques used to obtain public input and to integrate supply- and demand-side options into a unified plan, and procedures used in the final selection of resources for the plan.

  18. Electric Boiler and Heat Pump Thermo-Electrical Models for Demand Side Management Analysis in Low Voltage Grids

    DEFF Research Database (Denmark)

    Diaz de Cerio Mendaza, Iker; Bak-Jensen, Birgitte; Chen, Zhe

    2013-01-01

    The last fifteen years many European countries have integrated large percentage of renewable energy on their electricity generation mix. In Denmark the 21.3% of the electricity consumed nowadays is produced by the wind, and it has planned to be the 50% by 2025. In order to front future challenges...... on the power system control and operation, created by this unstable way of generation, Demand Side Management turns to be a promising solution. The storage capacity from thermo-electric units, like electric boilers and heat pumps, allows operating them with certain freedom. Hence they can be employed under...

  19. Energy efficiency, human behavior, and economic growth: Challenges to cutting energy demand to sustainable levels

    Energy Technology Data Exchange (ETDEWEB)

    Santarius, Tilman, E-mail: tilman@santarius.de [Visiting Scholar, Institute of European Studies and Energy and Resources Group, University of California, Berkeley, 310 Barrows Hall, Berkeley, CA 94720-3050 (United States)

    2015-03-30

    Increasing energy efficiency in households, transportation, industries, and services is an important strategy to reduce energy service demand to levels that allow the steep reduction of greenhouse gases, and a full fledged switch of energy systems to a renewable basis. Yet, technological efficiency improvements may generate so-called rebound effects, which may ‘eat up’ parts of the technical savings potential. This article provides a comprehensive review of existing research on these effects, raises critiques, and points out open questions. It introduces micro-economic rebound effect and suggests extending consumer-side analysis to incorporate potential ‘psychological rebound effects.’ It then discusses meso-economic rebound effects, i.e. producer-side and market-level rebounds, which so far have achieved little attention in the literature. Finally, the article critically reviews evidence for macro-economic rebound effects as energy efficiency-induced economic growth impacts. For all three categories, the article summarizes assessments of their potential quantitative scope, while pointing out remaining methodological weaknesses and open questions. As a rough “rule of thumb”, in the long term and on gross average, only half the technical savings potential of across-the-board efficiency improvements may actually be achieved in the real world. Policies that aim at cutting energy service demand to sustainable levels are well advised to take due note of detrimental behavioral and economic growth impacts, and should foster policies and measures that can contain them.

  20. Energy efficiency, human behavior, and economic growth: Challenges to cutting energy demand to sustainable levels

    Science.gov (United States)

    Santarius, Tilman

    2015-03-01

    Increasing energy efficiency in households, transportation, industries, and services is an important strategy to reduce energy service demand to levels that allow the steep reduction of greenhouse gases, and a full fledged switch of energy systems to a renewable basis. Yet, technological efficiency improvements may generate so-called rebound effects, which may `eat up' parts of the technical savings potential. This article provides a comprehensive review of existing research on these effects, raises critiques, and points out open questions. It introduces micro-economic rebound effect and suggests extending consumer-side analysis to incorporate potential `psychological rebound effects.' It then discusses meso-economic rebound effects, i.e. producer-side and market-level rebounds, which so far have achieved little attention in the literature. Finally, the article critically reviews evidence for macro-economic rebound effects as energy efficiency-induced economic growth impacts. For all three categories, the article summarizes assessments of their potential quantitative scope, while pointing out remaining methodological weaknesses and open questions. As a rough "rule of thumb", in the long term and on gross average, only half the technical savings potential of across-the-board efficiency improvements may actually be achieved in the real world. Policies that aim at cutting energy service demand to sustainable levels are well advised to take due note of detrimental behavioral and economic growth impacts, and should foster policies and measures that can contain them.

  1. Global Energy: Supply, Demand, Consequences, Opportunities (LBNL Summer Lecture Series)

    Energy Technology Data Exchange (ETDEWEB)

    Majumdar, Arun

    2008-07-29

    Summer Lecture Series 2009: Arun Majumdar, Director of the Environmental Energy Technologies Division, discusses current and future projections of economic growth, population, and global energy demand and supply, and explores the implications of these trends for the environment.

  2. Infrastructure of the information society and its energy demand

    Energy Technology Data Exchange (ETDEWEB)

    Souchon, Laetitia; Flipo, Fabrice [INT/ETOS - France Telecom R and D (France); Aebischer, Bernard [ETH Zurich, Centre for Energy Policy and Economics (CEPE) (Switzerland); Roturier, Jacques (retired from Univ. of Bordeaux, France)

    2007-07-01

    Energy demand of ICT end-use equipment, like personal computers, is considered a potentially important topic for almost 20 years. Policy measures, like the Energy Star Label and worldwide campaigns for low standby consumptions, are now successfully implemented in order that the energy demand of ICT end-use equipment is not growing uncontrolled.But what about energy demand of the infrastructure needed to make use of the ICT end-use equipment? Some previous work will be reported in the field of voice centric telecommunication indicating that energy demand of the infrastructure is growing much faster than energy demand of the phone and reaches for mobile communication up to 90 % of total energy demand. Regarding the infrastructure for internet, a much more complex issue, the energy demand data, as found in the literature, are rather uncertain and partially contradictory. The fraction of energy demand for the infrastructure is probably today of the order of 30 % while mobile communication and other trends being expected to steadily increase then installing the infrastructure as the most important element of future energy demand of ICT. In the present paper, a brief survey of several analyses of the energy demand of the infrastructure for ICT is given in section 1. In section 2, preliminary results of ongoing research presently performed by one of us (LS) in the framework of a France Telecom R and D Programme are presented. Finally, section 3 broadens the problematic to the interaction between ICT and contemporary societal and ecological contexts, as they are interlinked.

  3. THE TECHNOLOGY ASSESSMENT OF DEMAND SIDE BIDDING IN THE SOUTH AFRICAN CONTEXT*

    Directory of Open Access Journals (Sweden)

    H.K. Grover

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT:South Africa is currently in the grip of a severe power supply capacity constraint. January 2007 saw blackouts throughout the country, and worse was expected in the months to come. As a measure of immediate remedy Eskom has turned to demand side bidding (DSB, a methodology whereby the demand side has an opportunity to sell back flexible load to the supply side. This paper assesses DSB with the aim of evaluating and gauging the current and potential future standing of DSB as a technology product within the South African context.

    AFRIKAANSE OPSOMMING: Suid-Afrika ervaar tans ’n ernstige vraagstuk in elektrisiteitsvoorsiening. Vanaf Januarie 2007 kom gereelde kragonderbrekings voor, en volgens alle aanduidings lê die ergste nog voor. As ’n korttermynmaatreël beoog ESKOM ’n strategie van aanvraagbestuur en spesifiek aanvraag-bie, ’n metodologie waarvolgens verbruikers die geleentheid kry om elektrisiteit aan die verskaffer terug te verkoop. Hierdie artikel assesseer die metodologie ten einde die huidige en toekomstige gebruikersmoontlikhede daarvan as ’n tegnologieproduk binne Suid-Afrikaanse konteks te bepaal.

  4. Energy. The concept - the resources - the demand

    Energy Technology Data Exchange (ETDEWEB)

    Grawe, Joachim

    2007-04-15

    After giving a short historical review of how mankind has been using natural forces throughout its evolution, Energy elaborates on the physical attributes of energy. The rise in use of fossil and regenerative fuels is the third main subject. A detailed discussion about the interactions between energy requirements and standards of living completes the booklet. [German] Energy arbeitet nach einem kurzen historischen Exkurs, wie Menschen Naturkraefte in ihrer Entstehungsgeschichte nutzten und nutzen, die physi-kalischen Kennzeichen der Energie heraus. Die Entstehung fossiler und regenerativer Energietraeger ist der dritte Schwerpunkt. Abschliessend werden die Wechselwirkungen zwischen Energiebedarf und Lebensstan-dard ausfuehrlich diskutiert.

  5. Implications of Energy Return on Energy Invested on Future Total Energy Demand

    Directory of Open Access Journals (Sweden)

    Shinuo Deng

    2011-12-01

    Full Text Available Human society is now at the beginning of a transition from fossil-fuel based primary energy sources to a mixture of renewable and nuclear based energy sources which have a lower Energy Return On Energy Invested (EROEI than the older fossil based sources. This paper examines the evolution of total energy demand during this transition for a highly idealized energy economy. A simple model is introduced in which the net useful energy output required to operate an economy is assumed to remain fixed while the lower EROEI source gradually replaces the older higher EROEI primary energy source following a logistics substitution model. The results show that, for fixed net useful energy output, total energy demand increases as the ratio EROEInew/EROEIold decreases; total energy demand diverges as EROEInew approaches unity, indicating that the system must collapse in this limit.

  6. Study on the Determinants of Energy Demand in China

    Institute of Scientific and Technical Information of China (English)

    魏巍贤

    2002-01-01

    Based on the modern economic theory and the characteristics of China's energy consumption, this paper analyzes the determinants of energy demand in China, builds up a China's energy demand model, and examines the long-run relationship between China's aggregate energy consumption and the main economic variables such as GDP by using the Johansen multivariate approach. It is found that there exists unique long-run relationship among the variables in the model over the sampling period. An error-correction model provides an appropriate framework for forecasting the short-run fluctuations in the aggregate demand of China.

  7. Analysis of household energy demand in Vietnam

    Energy Technology Data Exchange (ETDEWEB)

    Nguyen Anh Tuan; Lefevre, T. [Institut d`Economie et de Politique de l`Energie, Grenoble (France)

    1996-12-01

    An analysis of household energy consumption in four Vietnamese provinces, Hanoi, Maitay, Haihung and Vinhphu, showed that each province exhibited different energy use patterns but these differences are in a relatively narrow range within urban or rural areas. However, there are big contrasts between rural areas due to availability of resources and income. Coal accounts for 41% of the total energy consumption and fuelwood for 26%, the remainder being kerosene and agricultural residues. Energy consumption for cooking and pigfeed accounts for 91% of total energy use. Households with better incomes are tending to switch from biomass to `modern` fuels with biomass playing a limited role in most urban households. Energy used for cooking was found to increase less readily than income. 21 refs., 3 figs., 11 tabs., 1 app.

  8. New Real-Time Market Facilitating Demand-Side Resources for System Balancing

    DEFF Research Database (Denmark)

    Feng, Donghan; Nyeng, Preben; Xie, Jun;

    2011-01-01

    of such loads can deliver a well-behaved, stable and predictable balancing support. Based on a comprehensive analysis of the current balancing markets, as well as the technical properties of traditional and potential balancing resources, this paper proposes a new real-time balancing market setup facilitating....... This research is potentially useful for designing future balancing markets and utilizing demand response for system services. Copyright (C) 2011 Praise Worthy Prize S.r.l. - All rights reserved.......Many demand side resources have the potential to provide fast and low cost balancing services. Switching these devices on and off can be executed in seconds and have limited consequences for the customers if the duration is not long. With carefully designed market rules, tens of thousands...

  9. Load curve classification for the evaluation of demand side management programs

    Science.gov (United States)

    Yumak, K.; Tosun, G.; Varlik, B.; Bağriyanık, M.

    2016-11-01

    The demand side management of electrical power systems is an issue of growing concern. In this study, annual load curves those have been obtained by field measurements on MV (31.5kV) feeders in an electricity distribution company in Turkey have been studied. Feeders supplying different type of customers (Agricultural irrigation, Commercial & Industrial and Residential) are classified through Peak and Night Ratio for the assessment of convenient incentive or price based methods. Statistical parameters, such as peak-to-average ratio, load factor and standard deviation are calculated. Active power deviations on annual and daily load curves are discussed.

  10. Communications technologies for demand side management, DSM, and European utility communications architecture, EurUCA

    Energy Technology Data Exchange (ETDEWEB)

    Uuspaeae, P. [VTT Energy, Espoo (Finland)

    1996-12-31

    The scope of this research is data communications for electric utilities. Demand Side Management (DSM) calls for communication between the Electric Utility and the Customer. The communication capacity needed will depend on the functions that are chosen for DSM, and on the number of customers. Some functions may be handled with one-way communications, some functions require two-way communication. Utility Communication Architecture looks for an overall view of the communications needs and communication systems in an electric utility. The objective is to define and specify suitable and compatible communications procedures within the Utility and also to outside parties. (27 refs.)

  11. Investment strategy for flexible capacity considering demand-side disruption risk

    Science.gov (United States)

    Meng, Cuicui; Ji, Jianhua; Li, Xinjun

    2016-04-01

    This article considers a firm selling two product families and confronting demand-side disruption risk. The firm has the option to invest in dedicated capacities and flexible capacity. To study the optimal investment strategy, we model the firm's decision as a two-stage stochastic programming problem, in which deviation risk is restricted within a certain level. Our analysis provides the necessary and sufficient conditions for the optimal strategy and the threshold policy for the flexible capacity investment. The results in the context of deviation risk constraint are compared with results derived outside of the context of deviation risk constraint. Furthermore, a numerical example is given to depict the optimal investment strategy.

  12. Demand for oil and energy in developing countries

    Energy Technology Data Exchange (ETDEWEB)

    Wolf, C. Jr.; Relles, D.A.; Navarro, J.

    1980-05-01

    How much of the world's oil and energy supply will the non-OPEC less-developed countries (NOLDCs) demand in the next decade. Will their requirements be small and thus fairly insignificant compared with world demand, or large and relatively important. How will world demand be affected by the economic growth of the NOLDCs. In this report, we try to develop some reasonable forecasts of NOLDC energy demands in the next 10 years. Our focus is mainly on the demand for oil, but we also give some attention to the total commercial energy requirements of these countries. We have tried to be explicit about the uncertainties associated with our forecasts, and with the income and price elasticities on which they are based. Finally, we consider the forecasts in terms of their implications for US policies concerning the NOLDCs and suggest areas of future research on NOLDC energy issues.

  13. Energy Demands and Efficiency Strategies in Data Center Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Shehabi, Arman [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2009-09-01

    for office or residential buildings. Estimates using a material-balance model match well with empirical results, indicating that the dominant particle sources and losses -- ventilation and filtration -- have been characterized. Measurements taken at a data center using economizers show nearly an order of magnitude increase in particle concentration during economizer activity. However, even with the increase, themeasured particle concentrations are still below concentration limits recommended in most industry standards. The research proceeds by exploring the feasibility of using economizers in data centers while simultaneously controlling particle concentrations with high-quality air filtration. Physical and chemical properties of indoor and outdoor particles were analyzed at a data center using economizers and varying levels of air filtration efficiency. Results show that when improved filtration is used in combination with an economizer, the indoor/outdoor concentration ratios for most measured particle types were similar to the measurements when using conventional filtration without economizers. An energy analysis of the data center reveals that, even during the summer months, chiller savings from economizer use greatly outweigh the increase in fan power associated with improved filtration. These findings indicate that economizer use combined with improved filtration couldsignificantly reduce data center energy demand while providing a level of protection from particles of outdoor origin similar to that observed with conventional design. The emphasis of the dissertation then shifts to evaluate the energy benefits of economizer use in data centers under different design strategies. Economizer use with high ventilation rates is compared against an alternative, water-side economizer design that does not affect indoor particle concentrations. Building energy models are employed to estimate energy savings of both economizer designs for data centers in

  14. Ant colony optimization approach to estimate energy demand of Turkey

    Energy Technology Data Exchange (ETDEWEB)

    Duran Toksari, M. [Erciyes University, Kayseri (Turkey). Engineering Faculty, Industrial Engineering Department

    2007-08-15

    This paper attempts to shed light on the determinants of energy demand in Turkey. Energy demand model is first proposed using the ant colony optimization (ACO) approach. It is multi-agent systems in which the behavior of each ant is inspired by the foraging behavior of real ants to solve optimization problem. ACO energy demand estimation (ACOEDE) model is developed using population, gross domestic product (GDP), import and export. All equations proposed here are linear and quadratic. Quadratic{sub A}COEDE provided better-fit solution due to fluctuations of the economic indicators. The ACOEDE model plans the energy demand of Turkey until 2025 according to three scenarios. The relative estimation errors of the ACOEDE model are the lowest when they are compared with the Ministry of Energy and Natural Resources (MENR) projection. (author)

  15. Managing the growing energy demand - The case of Egypt

    Energy Technology Data Exchange (ETDEWEB)

    El-Kholy, Hosni; Faried, Ragy

    2010-09-15

    The electric energy consumption rate in Egypt has an average increase of 7% per year through the last three decades. In order to satisfy the ever increasing energy demand, several actions were, and have to be taken. These actions have to be carried out in parallel. The one having the greatest effect is the measures carried out for energy conservation and loss reduction. Diversifying the energy source such as utilization of Renewable Energy technologies can contribute to satisfying the demand and extending the hydro-carbon reserves life. Regional integration of electrical networks will save expenditures used to build additional power plants.

  16. 新能源电力系统中需求侧响应关键问题及未来研究展望%Key Issues and Research Prospects for Demand-side Response in Alternate Electrical Power Systems with Renewable Energy Sources

    Institute of Scientific and Technical Information of China (English)

    曾博; 杨雍琦; 段金辉; 曾鸣; 欧阳邵杰; 李晨

    2015-01-01

    Fossil energy shortage and the goals of energy-saving and emission reduction are making it imperative to make adjustment in energy development strategies.With the large-scale connection to new energy generation,traditional power grids are evolving into alternate electrical power systems to,challenge their operational control.As a category of virtual controllable resource,introducing demand-side response (DR) can effectively overcome the problem of intermittency of new energy generation,while improving the utilization efficiency in the grids.Therefore,it is an important issue worth further discussion. This paper firstly introduces the basic features and implication of alternate electrical power systems with renewable energy sources.Then the potential contribution and effects of different demand side resources in such systems are treated according to their inherent characteristics.The enabling technologies of DR and the information about their application across the world are also summarized.On this basis,the status quo concerning DR studies in alternate electrical power systems is analyzed from five facets:planning,operation,control,evaluation,and market mechanism.Subsequently,we analyze the nodus that existed and point out the research directions worth further exploration in the above fields.Finally,based on the actual conditions of China,some suggestions are put forward for commercial application of DR and its safeguard mechanism in the context of the new energy era.%化石能源短缺和节能减排的双重压力促使中国能源发展方式亟待转型调整。随着新能源发电的规模化并网应用,传统电网正在逐步向着新能源电力系统方向演变,并对其运行控制带来显著的影响。作为一类虚拟可控资源,在新能源电力系统中考虑需求侧响应(DR)可有效克服新能源发电的间歇性问题,提高电网对新能源的利用效率,实现源荷互动与协同增效。文

  17. Demand Response Resource Quantification with Detailed Building Energy Models

    Energy Technology Data Exchange (ETDEWEB)

    Hale, Elaine; Horsey, Henry; Merket, Noel; Stoll, Brady; Nag, Ambarish

    2017-04-03

    Demand response is a broad suite of technologies that enables changes in electrical load operations in support of power system reliability and efficiency. Although demand response is not a new concept, there is new appetite for comprehensively evaluating its technical potential in the context of renewable energy integration. The complexity of demand response makes this task difficult -- we present new methods for capturing the heterogeneity of potential responses from buildings, their time-varying nature, and metrics such as thermal comfort that help quantify likely acceptability of specific demand response actions. Computed with an automated software framework, the methods are scalable.

  18. Single-Family Houses That Meet The Future Energy Demands

    DEFF Research Database (Denmark)

    Rose, Jørgen; Svendsen, Svend

    2002-01-01

    to examine these consequences thoroughly. The department is presently contributing to this end by participating in quite a few investigative projects, where single-family houses are designed to meet the proposed future energy demands. This paper describes the results obtained from one such project where...... the department, in co-operation with a major building entrepreneur, has developed a single-family house that shows that there are no evident problems in meeting the future energy demands....

  19. Autonomous Hybrid Priority Queueing for Scheduling Residential Energy Demands

    Science.gov (United States)

    Kalimullah, I. Q.; Shamroukh, M.; Sahar, N.; Shetty, S.

    2017-05-01

    The advent of smart grid technologies has opened up opportunities to manage the energy consumption of the users within a residential smart grid system. Demand response management is particularly being employed to reduce the overall load on an electricity network which could in turn reduce outages and electricity costs. The objective of this paper is to develop an intelligible scheduler to optimize the energy available to a micro grid through hybrid queueing algorithm centered around the consumers’ energy demands. This is achieved by shifting certain schedulable load appliances to light load hours. Various factors such as the type of demand, grid load, consumers’ energy usage patterns and preferences are considered while formulating the logical constraints required for the algorithm. The algorithm thus obtained is then implemented in MATLAB workspace to simulate its execution by an Energy Consumption Scheduler (ECS) found within smart meters, which automatically finds the optimal energy consumption schedule tailor made to fit each consumer within the micro grid network.

  20. A Multi-Objective Demand Side Management Considering ENS Cost in Smart Grids

    DEFF Research Database (Denmark)

    Yousefi Khanghah, Babak; Ghassemzadeh, Saeid; Hosseini, Seyed Hossein

    2017-01-01

    In this paper a new method is presented to achieve economic exploitation and proper usage of network capacity by exerting controlling actions over flexible loads and energy storage (ES) equipment. Multi-objective planning for demand response programs (DRP) and battery management policies is carri...... company (DisCo) modifies energy cost as a signal for DGO in order to coordinate with each other. So, behavior of DGO is based on modified energy price applied by upstream system considering ENS price....... out by considering energy not supplied (ENS). In order to achieve an optimal scheduling, charge/discharge control for batteries, demand response programs and dispatch of controllable distributed generations (DGs) are also considered. Then, the balanced cost and benefits of participants are evaluated....... As a whole, the main objective of this paper is to manage the load and energy storage options in a smart grid to reduce ENS, to minimize overall operation cost and to maximize DG operators’ (DGOs) profit. These goals are obtained by considering ENS cost in a multi-objective optimization problem. Distribution...

  1. Design and Implementation of Demand Response Information Interactive Service Platform Based on “Internet Plus” Smart Energy

    Science.gov (United States)

    Cui, Gaoying; Fan, Jie; Qin, Yuchen; Wang, Dong; Chen, Guangyan

    2017-05-01

    In order to promote the effective use of demand response load side resources, promote the interaction between supply and demand, enhance the level of customer service and achieve the overall utilization of energy, this paper briefly explain the background significance of design demand response information platform and current situation of domestic and foreign development; Analyse the new demand of electricity demand response combined with the application of Internet and big data technology; Design demand response information platform architecture, construct demand responsive system, analyse process of demand response strategy formulate and intelligent execution implement; study application which combined with the big data, Internet and demand response technology; Finally, from information interaction architecture, control architecture and function design perspective design implementation of demand response information platform, illustrate the feasibility of the proposed platform design scheme implemented in a certain extent.

  2. Analysis of energy and utility service demands

    Energy Technology Data Exchange (ETDEWEB)

    1978-10-01

    The collection, analysis, and review of existing data on a community's service requirements are documented. The research focused on the analysis of energy-using activities including both micro activities such as space heating, cooking, lighting, and transportation; and macro activities such as providing shelter, health care, education, etc. The technical report describes the analytical framework developed for community description; describes an indexing system by which a catalog of services can be accessed; illustrates the application of the data to an existing community; and provides ancillary information on data availability. A catalog of data is presented which includes several sets of indices which facilitate access of data using various keys. Abstracts of 48 data sources are analyzed. Each abstract includes a description and evaluation of the data, a sampling of that data, an assessment as to how that data may be applied to other analyses, and a reference where the user can secure additional data. (MCW)

  3. Energy efficiency improvement potentials and a low energy demand scenario for the global industrial sector

    NARCIS (Netherlands)

    Kermeli, Katerina; Graus, Wina H J; Worrell, Ernst

    2014-01-01

    The adoption of energy efficiency measures can significantly reduce industrial energy use. This study estimates the future industrial energy consumption under two energy demand scenarios: (1) a reference scenario that follows business as usual trends and (2) a low energy demand scenario that takes i

  4. Energy efficiency improvement potentials and a low energy demand scenario for the global industrial sector

    NARCIS (Netherlands)

    Kermeli, Katerina; Graus, Wina H J; Worrell, Ernst

    2014-01-01

    The adoption of energy efficiency measures can significantly reduce industrial energy use. This study estimates the future industrial energy consumption under two energy demand scenarios: (1) a reference scenario that follows business as usual trends and (2) a low energy demand scenario that takes

  5. A novel domestic electric water heater model for a multi-objective demand side management program

    Energy Technology Data Exchange (ETDEWEB)

    Paull, Liam; Li, Howard; Chang, Liuchen [University of New Brunswick, Department of Electrical Engineering, Fredericton, NB (Canada)

    2010-12-15

    This paper presents a novel domestic hot water heater model to be used in a multi-objective demand side management program. The model incorporates both the thermal losses and the water usage to determine the temperature of the water in the tank. Water heater loads are extracted from household load data and then used to determine the household water usage patterns. The benefits of the model are: (1) the on/off state of the water heater and temperature of the water in the tank can be accurately predicted, and (2) it enables the development of water usage profiles so that users can be classified based on usage behaviour. As a result, the amount of ancillary services and peak shaving that can be achieved are accurately predictable and can be maximized without adversely affecting users. (author)

  6. Multicriteria evaluation of demand side management (DSM) implementation strategies in the Indian power sector

    Energy Technology Data Exchange (ETDEWEB)

    Vashishtha, Sanjay [Centre for Renewable Energy and Environmental Development (CREED), BITS, Pilani, Rajasthan 333031 (India); Ramachandran, M. [BITS Pilani Dubai Centre, Dubai (United Arab Emirates)

    2006-09-15

    In recent years, demand side management (DSM) has emerged as an efficient utility planning strategy for reducing capacity shortages and improving system load factors. The Indian government is adopting various policies to implement DSM programs. DSM implementation involves a variety of interests with conflicting objectives, and a range of possible implementation strategies with varying implications for effectiveness, cost, feasibility, efficiency and stakeholder acceptance. This necessitates a critical comparison of the strategies to determine a preferred strategy or combination of strategies from each specific stakeholder's point of view. The present study evaluates DSM implementation strategies from a multiobjective perspective using the Analytic Hierarchy Process (AHP). Eight strategies and six criteria were considered. Forty utility, regulator, and consumer stakeholders were surveyed. The most highly ranked strategies involved creating dedicated funds and providing technical support to end users for effective implementation of DSM. (author)

  7. An Improved Fuzzy C-Means Algorithm for the Implementation of Demand Side Management Measures

    Directory of Open Access Journals (Sweden)

    Ioannis Panapakidis

    2017-09-01

    Full Text Available Load profiling refers to a procedure that leads to the formulation of daily load curves and consumer classes regarding the similarity of the curve shapes. This procedure incorporates a set of unsupervised machine learning algorithms. While many crisp clustering algorithms have been proposed for grouping load curves into clusters, only one soft clustering algorithm is utilized for the aforementioned purpose, namely the Fuzzy C-Means (FCM algorithm. Since the benefits of soft clustering are demonstrated in a variety of applications, the potential of introducing a novel modification of the FCM in the electricity consumer clustering process is examined. Additionally, this paper proposes a novel Demand Side Management (DSM strategy for load management of consumers that are eligible for the implementation of Real-Time Pricing (RTP schemes. The DSM strategy is formulated as a constrained optimization problem that can be easily solved and therefore, making it a useful tool for retailers’ decision-making framework in competitive electricity markets.

  8. A sustainable development of a city electrical grid via a non-contractual Demand-Side Management

    Science.gov (United States)

    Samoylenko, Vladislav O.; Pazderin, Andrew V.

    2017-06-01

    An increasing energy consumption of large cities as well as an extreme high density of city electrical loads leads to the necessity to search for an alternative approaches to city grid development. The ongoing implementation of the energy accounting tariffs with differentiated rates depending upon the market conditions and changing in a short-term perspective, provide the possibility to use it as a financial incentive base of a Demand-Side Management (DSM). Modern hi-technology energy metering and accounting systems with a large number of functions and consumer feedback are supposed to be the good means of DSM. Existing systems of Smart Metering (SM) billing usually provide general information about consumption curve, bills and compared data, but not the advanced statistics about the correspondence of financial and electric parameters. Also, consumer feedback is usually not fully used. So, the efforts to combine the market principle, Smart Metering and a consumer feedback for an active non-contractual load control are essential. The paper presents the rating-based multi-purpose system of mathematical statistics and algorithms of DSM efficiency estimation useful for both the consumers and the energy companies. The estimation is performed by SM Data processing systems. The system is aimed for load peak shaving and load curve smoothing. It is focused primarily on a retail market support. The system contributes to the energy efficiency and a distribution process improvement by the manual management or by the automated Smart Appliances interaction.

  9. Demand-side mitigation options of the agricultural sector: potential, barriers and ways forward

    Directory of Open Access Journals (Sweden)

    Brunelle Thierry

    2017-01-01

    Full Text Available This paper reviews the potential and barriers of demand-side mitigation options in the agricultural sector based on the recent academic literature and on a survey conducted on a sample of 788 respondents living in France. The mitigation potential of such measures as reducing losses in the food supply chain and shifting diets toward less animal products is estimated to be particularly high, higher, in particular, than supply-side mitigation options. However, to ensure that these measures do not entail a reduction in protein intake, these estimations should consider both caloric and protein units, and take into account the digestibility differentials between protein sources. Our survey shows that people are relatively reluctant to eat more sustainably, preferring to reduce their emissions in other areas such as housing or equipment. This relative reluctance is mainly due to individual perceptions linked to health concerns, taste or habits. Some obstacles could easily be overcome through well-designed policies aiming to, for example, advertise a lower consumption of red meat for health benefits. National governments are, however, rather inactive on this topic, leaving the initiative to the civil society.

  10. Simulation of demand side participation in Spanish short term electricity markets

    Energy Technology Data Exchange (ETDEWEB)

    Valencia-Salazar, I.; Alvarez, C. [Institute for Energy Engineering, Universidad Politecnica de Valencia, Camino de Vera, s/n, edificio 8E, escalera F, 2a planta, 46022 Valencia (Spain); Escriva-Escriva, G., E-mail: guieses@die.upv.e [Institute for Energy Engineering, Universidad Politecnica de Valencia, Camino de Vera, s/n, edificio 8E, escalera F, 2a planta, 46022 Valencia (Spain); Alcazar-Ortega, M. [Institute for Energy Engineering, Universidad Politecnica de Valencia, Camino de Vera, s/n, edificio 8E, escalera F, 2a planta, 46022 Valencia (Spain)

    2011-07-15

    Highlights: {yields} Benefits from customer active participation can be obtained with a proper generation of bids and offers. {yields} Simulation of Spanish customers' participation is shown in daily, intra-daily and balancing markets. {yields} Market efficiency and economics profits arise in balancing markets by using customer load reductions. {yields} Real market prices and real customers' consumptions profiles are used in the simulations. -- Abstract: Demand response resources management is one of the most investigated solutions oriented to improve the efficiency in electricity markets. In this paper, the capability of customers to participate in short term markets is analyzed. An available methodology to analyze the daily and monthly energy consumptions of large customers is used to create energy offers and bids. This allows customers to participate in energy markets in order to buy, as first step, the usual electricity consumption and, additionally, to offer demand reductions in the short term electricity markets. Additionally, this paper shows the customer potential to participate in the Spanish electricity markets.

  11. Scenarios of energy demand and efficiency potential for Bulgaria

    Energy Technology Data Exchange (ETDEWEB)

    Tzvetanov, P.; Ruicheva, M.; Denisiev, M.

    1996-12-31

    The paper presents aggregated results on macroeconomic and final energy demand scenarios developed within the Bulgarian Country Study on Greenhouse Gas Emissions Mitigation, supported by US Country Studies Program. The studies in this area cover 5 main stages: (1) {open_quotes}Baseline{close_quotes} and {open_quotes}Energy Efficiency{close_quotes} socioeconomic and energy policy philosophy; (2) Modeling of macroeconomic and sectoral development till 2020; (3) Expert assessments on the technological options for energy efficiency increase and GHG mitigation in the Production, Transport and Households and Services Sectors; (4) Bottom-up modeling of final energy demand; and (5) Sectoral and overall energy efficiency potential and policy. Within the Bulgarian Country Study, the presented results have served as a basis for the final integration stage {open_quotes}Assessment of the Mitigation Policy and Measures in the Energy System of Bulgaria{close_quotes}.

  12. Energy demand analytics using coupled technological and economic models

    Science.gov (United States)

    Impacts of a range of policy scenarios on end-use energy demand are examined using a coupling of MARKAL, an energy system model with extensive supply and end-use technological detail, with Inforum LIFT, a large-scale model of the us. economy with inter-industry, government, and c...

  13. China's Energy Demand Growth Expected to Slow Down in 2005

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    @@ China's energy consumption rises 15.1 percent China's energy consumption rose 15.1 percent in the first 11 months of 2004, boosted by strong demand from manufacturing industries, according to the reports from the Chinese news media. In the period from January to November, the country consumed a total of 1.95 trillion kilowatt hours.

  14. Impact of selected energy conservation technologies on baseline demands

    Energy Technology Data Exchange (ETDEWEB)

    Doernberg, A

    1977-09-01

    This study is an application of the modeling and demand projection capability existing at Brookhaven National Laboratory to specific options in energy conservation. Baseline energy demands are modified by introducing successively three sets of conservation options. The implementation of improved building standards and the use of co-generation in industry are analyzed in detail and constitute the body of this report. Two further sets of energy demands are presented that complete the view of a low energy use, ''conservation'' scenario. An introduction to the report covers the complexities in evaluating ''conservation'' in view of the ways it is inextricably linked to technology, prices, policy, and the mix of output in the economy. The term as used in this report is narrowly defined, and methodologies are suggested by which these other aspects listed can be studied in the future.

  15. Evaluation of climate change impacts on energy demand

    DEFF Research Database (Denmark)

    Taseska, Verica; Markovska, Natasa; Callaway, John M.

    2012-01-01

    Adaptation Case, in which the optimal electricity generation mix is determined by allowing for endogenous capacity adjustments in the model. This modeling exercise will identify the changes in the energy demand and in electricity generation mix in the Adaptation Case, as well as climate change damages......Although previous climate change research has documented the effects of linking mitigation and adaptation in the energy sector, there is still a lack of integrated assessment, particularly at national level. This paper may contribute to fill this gap, identifying the interactions between climate...... change and the energy demand in Macedonia. The analyses are conducted using the MARKAL (MARKet ALlocation)-Macedonia model, with a focus on energy demand in commercial and residential sectors (mainly for heating and cooling). Three different cases are developed: 1) Base Case, which gives the optimal...

  16. Modelling energy demand in the Norwegian building stock

    Energy Technology Data Exchange (ETDEWEB)

    Sartori, Igor

    2008-07-15

    Energy demand in the building stock in Norway represents about 40% of the final energy consumption, of which 22% goes to the residential sector and 18% to the service sector. In Norway there is a strong dependency on electricity for heating purposes, with electricity covering about 80% of the energy demand in buildings. The building sector can play an important role in the achievement of a more sustainable energy system. The work performed in the articles presented in this thesis investigates various aspects related to the energy demand in the building sector, both in singular cases and in the stock as a whole. The work performed in the first part of this thesis on development and survey of case studies provided background knowledge that was then used in the second part, on modelling the entire stock. In the first part, a literature survey of case studies showed that, in a life cycle perspective, the energy used in the operating phase of buildings is the single most important factor. Design of low-energy buildings is then beneficial and should be pursued, even though it implies a somewhat higher embodied energy. A case study was performed on a school building. First, a methodology using a Monte Carlo method in the calibration process was explored. Then, the calibrated model of the school was used to investigate measures for the achievement of high energy efficiency standard through renovation work. In the second part, a model was developed to study the energy demand in a scenario analysis. The results showed the robustness of policies that included conservation measures against the conflicting effects of the other policies. Adopting conservation measures on a large scale showed the potential to reduce both electricity and total energy demand from present day levels while the building stock keeps growing. The results also highlighted the inertia to change of the building stock, due to low activity levels compared to the stock size. It also became clear that a deeper

  17. Advanced Controls and Communications for Demand Response andEnergy Efficiency in Commercial Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Kiliccote, Sila; Piette, Mary Ann; Hansen, David

    2006-01-17

    Commercial buildings account for a large portion of summer peak demand. Research results show that there is significant potential to reduce peak demand in commercial buildings through advanced control technologies and strategies. However, a better understanding of commercial building's contribution to peak demand and the use of energy management and control systems is required to develop this demand response resource to its full potential. This paper discusses recent research results and new opportunities for advanced building control systems to provide demand response (DR) to improve electricity markets and reduce electric grid problems. The main focus of this paper is the role of new and existing control systems for HVAC and lighting in commercial buildings. A demand-side management framework from building operations perspective with three main features: daily energy efficiency, daily peak load management and event driven, dynamic demand response is presented. A general description of DR, its benefits, and nationwide potential in commercial buildings is outlined. Case studies involving energy management and control systems and DR savings opportunities are presented. The paper also describes results from three years of research in California to automate DR in buildings. Case study results and research on advanced buildings systems in New York are also presented.

  18. Load Reduction, Demand Response and Energy Efficient Technologies and Strategies

    Energy Technology Data Exchange (ETDEWEB)

    Boyd, Paul A.; Parker, Graham B.; Hatley, Darrel D.

    2008-11-19

    The Department of Energy’s (DOE’s) Pacific Northwest National Laboratory (PNNL) was tasked by the DOE Office of Electricity (OE) to recommend load reduction and grid integration strategies, and identify additional demand response (energy efficiency/conservation opportunities) and strategies at the Forest City Housing (FCH) redevelopment at Pearl Harbor and the Marine Corps Base Hawaii (MCBH) at Kaneohe Bay. The goal was to provide FCH staff a path forward to manage their electricity load and thus reduce costs at these FCH family housing developments. The initial focus of the work was at the MCBH given the MCBH has a demand-ratchet tariff, relatively high demand (~18 MW) and a commensurate high blended electricity rate (26 cents/kWh). The peak demand for MCBH occurs in July-August. And, on average, family housing at MCBH contributes ~36% to the MCBH total energy consumption. Thus, a significant load reduction in family housing can have a considerable impact on the overall site load. Based on a site visit to the MCBH and meetings with MCBH installation, FCH, and Hawaiian Electric Company (HECO) staff, recommended actions (including a "smart grid" recommendation) that can be undertaken by FCH to manage and reduce peak-demand in family housing are made. Recommendations are also made to reduce overall energy consumption, and thus reduce demand in FCH family housing.

  19. Modelling energy demand in the buildings sector within the EU

    Energy Technology Data Exchange (ETDEWEB)

    O Broin, Eoin

    2012-11-01

    In the on-going effort within the EU to tackle greenhouse gas emissions and secure future energy supplies, the buildings sector is often referred to as offering a large potential for energy savings. The aim of this thesis is to produce scenarios that highlight the parameters that affect the energy demands and thus potentials for savings of the building sector. Top-down and bottom-up approaches to modelling energy demand in EU buildings are applied in this thesis. The top-down approach uses econometrics to establish the historical contribution of various parameters to energy demands for space and water heating in the residential sectors of four EU countries. The bottom-up approach models the explicit impact of trends in energy efficiency improvement on total energy demand in the EU buildings stock. The two approaches are implemented independently, i.e., the results from the top-down studies do not feed into those from the bottom-up studies or vice versa. The explanatory variables used in the top-down approach are: energy prices; heating degree days, as a proxy for outdoor climate; a linear time trend, as a proxy for technology development; and the lag of energy demand, as a proxy for inertia in the system. In this case, inertia refers to the time it takes to replace space and water heating systems in reaction to price changes. The analysis gives long-term price elasticities of demand as follows: for France, -0.17; for Italy, -0.35; for Sweden, -0.27; and for the UK, -0.35. These results reveal that the price elasticity of demand for space and water heating is inelastic in each of these cases. Nonetheless, scenarios created for the period up to 2050 using these elasticities and an annual price increase of 3 % show that demand can be reduced by more than 1 % per year in France and Sweden and by less than 1 % per year in Italy and the UK. In the bottom-up modelling, varying rates for conversion efficiencies, heating standards for new buildings, end-use efficiency, and

  20. Demand Responsive and Energy Efficient Control Technologies andStrategies in Commercial Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Piette, Mary Ann; Kiliccote, Sila

    2006-09-01

    Commercial buildings account for a large portion of summer peak electric demand. Research results show that there is significant potential to reduce peak demand in commercial buildings through advanced control technologies and strategies. However, a better understanding of commercial buildings contribution to peak demand and the use of energy management and control systems is required to develop this demand response resource to its full potential. The main objectives of the study were: (1) To evaluate the size of contributions of peak demand commercial buildings in the U.S.; (2) To understand how commercial building control systems support energy efficiency and DR; and (3) To disseminate the results to the building owners, facility managers and building controls industry. In order to estimate the commercial buildings contribution to peak demand, two sources of data are used: (1) Commercial Building Energy Consumption Survey (CBECS) and (2) National Energy Modeling System (NEMS). These two sources indicate that commercial buildings noncoincidental peak demand is about 330GW. The project then focused on technologies and strategies that deliver energy efficiency and also target 5-10% of this peak. Based on a building operations perspective, a demand-side management framework with three main features: (1) daily energy efficiency, (2) daily peak load management and (3) dynamic, event-driven DR are outlined. A general description of DR, its benefits, and nationwide DR potential in commercial buildings are presented. Case studies involving these technologies and strategies are described. The findings of this project are shared with building owners, building controls industry, researchers and government entities through a webcast and their input is requested. Their input is presented in the appendix section of this report.

  1. Energy Demand and Supply Analysis and Outlook - Energy Forecast for 2001 and Policy Issues

    Energy Technology Data Exchange (ETDEWEB)

    Na, In Gang; Ryu, Ji Chul [Korea Energy Economics Institute, Euiwang (Korea)

    2000-12-01

    The energy consumption in Korea has grown at impressive rates during the last 3 decades, along with the economic growth. The global concern about the environment issue and the restructuring in Korea energy industry has an effect on the pattern and trend of energy demand in Korea. Under the situation, this research are focusing on the analysis of energy consumption and forecast of energy demand. First of all, we analyze the trends and major characteristics of energy consumption, beginning with 1970s and up to the third quarter of 2000. In the analysis of energy consumption by energy types, we also perform qualitative analysis on the trends and characteristics of each energy types, including institutional analysis. In model section, we start with the brief description of synopsis and outline the survey on empirical models for energy demand. The econometric model used in KEEI's short-term energy forecast is outlined, followed by the result of estimations. The 2001 energy demand forecast is predicted in detail by sectors and energy types. In the year 2001, weak demand is projected to continue through the First Half, and pick up its pace of growth only in the Second Half. Projected total demand is 201.3 million TOE or 4.4% growth. In the last section, the major policy issues are summarized in three sub-sections: the restructuring in energy industry, the security of energy demand and supply, international energy cooperation including south-north energy cooperation. (author). 86 refs., 43 figs., 73 tabs.

  2. Potentials for energy savings and long term energy demands for Croatian households sector

    DEFF Research Database (Denmark)

    Pukšec, Tomislav; Mathiesen, Brian Vad; Duic, Neven

    2011-01-01

    demand in the future, based on careful and rational energy planning. Different financial, legal and technological mechanisms can lead to significant savings in the households sector which also leads to lesser greenhouse gas emissions and lower Croatian dependence on foreign fossil fuels....... relevant. In order to plan future energy systems it is important to know future possibilities and needs regarding energy demand for different sectors. Through this paper long term energy demand projections for Croatian households sector will be shown with a special emphasis on different mechanisms, both...... financial, legal but also technological that will influence future energy demand scenarios. It is important to see how these mechanisms influence, positive or negative, on future energy demand and which mechanism would be most influential. Energy demand predictions in this paper are based upon bottom...

  3. Potentials for energy savings and long term energy demands for Croatian households sector

    DEFF Research Database (Denmark)

    Pukšec, Tomislav; Mathiesen, Brian Vad; Duic, Neven

    2013-01-01

    demand in the future, based on careful and rational energy planning. Different financial, legal and technological mechanisms can lead to significant savings in the households sector which also leads to lesser greenhouse gas emissions and lower Croatian dependence on foreign fossil fuels....... relevant. In order to plan future energy systems it is important to know future possibilities and needs regarding energy demand for different sectors. Through this paper long term energy demand projections for Croatian households sector will be shown with a special emphasis on different mechanisms, both...... financial, legal but also technological that will influence future energy demand scenarios. It is important to see how these mechanisms influence, positive or negative, on future energy demand and which mechanism would be most influential. Energy demand predictions in this paper are based upon bottom...

  4. Addressing maternal healthcare through demand side financial incentives: experience of Janani Suraksha Yojana program in India

    Directory of Open Access Journals (Sweden)

    Gopalan Saji S

    2012-09-01

    Full Text Available Abstract Background Demand side financing (DSF is a widely employed strategy to enhance utilization of healthcare. The impact of DSF on health care seeking in general and that of maternal care in particular is already known. Yet, its effect on financial access to care, out-of-pocket spending (OOPS and provider motivations is not considerably established. Without such evidence, DSFs may not be recommendable to build up any sustainable healthcare delivery approach. This study explores the above aspects on India’s Janani Suraksha Yojana (JSY program. Methods This study employed design and was conducted in three districts of Orissa, selected through a three-stage stratified sampling. The quantitative method was used to review the Health Management Information System (HMIS. The qualitative methods included focus groups discussions with beneficiaries (n = 19 and community intermediaries (n = 9, and interviews (n = 7 with Ministry of Health officials. HMIS data enabled to review maternal healthcare utilization. Group discussions and interviews explored the perceived impact of JSY on in-facility delivery, OOPS, healthcare costs, quality of care and performance motivation of community health workers. Results The number of institutional deliveries, ante-and post-natal care visits increased after the introduction of JSY with an annual net growth of 18.1%, 3.6% and 5% respectively. The financial incentive provided partial financial risk-protection as it could cover only 25.5% of the maternal healthcare cost of the beneficiaries in rural areas and 14.3% in urban areas. The incentive induced fresh out-of-pocket spending for some mothers and it could not address maternal care requirements comprehensively. An activity-based community worker model was encouraging to augment maternal healthcare consumption. However, the existing level of financial incentives and systemic support were inadequate to motivate the volunteers optimally on their

  5. Addressing maternal healthcare through demand side financial incentives: experience of Janani Suraksha Yojana program in India.

    Science.gov (United States)

    Gopalan, Saji S; Durairaj, Varatharajan

    2012-09-15

    Demand side financing (DSF) is a widely employed strategy to enhance utilization of healthcare. The impact of DSF on health care seeking in general and that of maternal care in particular is already known. Yet, its effect on financial access to care, out-of-pocket spending (OOPS) and provider motivations is not considerably established. Without such evidence, DSFs may not be recommendable to build up any sustainable healthcare delivery approach. This study explores the above aspects on India's Janani Suraksha Yojana (JSY) program. This study employed design and was conducted in three districts of Orissa, selected through a three-stage stratified sampling. The quantitative method was used to review the Health Management Information System (HMIS). The qualitative methods included focus groups discussions with beneficiaries (n = 19) and community intermediaries (n = 9), and interviews (n = 7) with Ministry of Health officials. HMIS data enabled to review maternal healthcare utilization. Group discussions and interviews explored the perceived impact of JSY on in-facility delivery, OOPS, healthcare costs, quality of care and performance motivation of community health workers. The number of institutional deliveries, ante-and post-natal care visits increased after the introduction of JSY with an annual net growth of 18.1%, 3.6% and 5% respectively. The financial incentive provided partial financial risk-protection as it could cover only 25.5% of the maternal healthcare cost of the beneficiaries in rural areas and 14.3% in urban areas. The incentive induced fresh out-of-pocket spending for some mothers and it could not address maternal care requirements comprehensively. An activity-based community worker model was encouraging to augment maternal healthcare consumption. However, the existing level of financial incentives and systemic support were inadequate to motivate the volunteers optimally on their performance. Demand side financial incentive could enhance financial

  6. Characterization and Analysis of Energy Demand Patterns in Airports

    Directory of Open Access Journals (Sweden)

    Sergio Ortega Alba

    2017-01-01

    Full Text Available Airports in general have high-energy consumption. Influenced by many factors, the characteristics of airport energy consumption are stochastic, nonlinear and dynamic. In recent years, airport managers have made huge efforts to harmonize airport operation with environmental sustainability by minimizing the environmental impact, with energy conservation and energy efficiency as one of their pillars. A key factor in order to reduce energy consumption at airports is to understand the energy use and consumption behavior, due to the multiple parameters and singularities that are involved. In this article, a 3-step methodology based on monitoring methods is proposed to characterize and analyze energy demand patterns in airports through their electric load profiles, and is applied to the Seve Ballesteros-Santander Airport (Santander, Spain. This methodology can be also used in airports in order to determine the way energy is used, to establish the classification of the electrical charges based on their operation way as well as to determine the main energy consumers and main external influencers. Results show that airport present a daily energy demand pattern since electric load profiles follow a similar curve shape for every day of the year, having a great dependence of the terminal building behavior, the main energy consumer of the airport, and with heating, ventilation and air conditioning (HVAC and lighting being the most energy-intensive facilities, and outside temperature and daylighting the main external influencers.

  7. Evaluation of Orange and Rockland Utilities, Inc.`s competitive bidding program for demand-side resources. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Peters, J.S.; Stucky, L.; Seratt, P.; Darden-Butler, D. [Barakat and Chamberlin, Inc., Portland, OR (United States)

    1993-02-01

    The process evaluation reports on the implementation of Orange and Rockland Utilities demand-side bidding program in New York State during 1991 and 1992. The program is implemented by two energy service companies in Orange and rockland`s New York State service territory. The process evaluation methodology included interviews with utility staff (3), energy service company staff (2), and participating (6) and nonparticipating (7) utility customers. The two energy service companies had enrolled 14 customers in the program by summer 1992. One company had achieved 90% of their 2.75 MW bid and the other had achieved less than 90% of their 6.9 MW bid. Critical factors in success were determination of a reasonable bid amount for the market and marketing to the appropriate customers. Customers most interested in the program included those with limited access to capital and medium-sized firms with poor cash flows, particularly schools and hospitals. The findings also show that due to the incentive structure and associated need for substantial customer contributions, lighting measures dominate all installations. Customers, however, were interested in the potential savings and six of the nonparticipants chose to either install measures on their own or enroll in the utility`s rebate program.

  8. 'Energy landscapes': Meeting energy demands and human aspirations.

    Science.gov (United States)

    Blaschke, Thomas; Biberacher, Markus; Gadocha, Sabine; Schardinger, Ingrid

    2013-08-01

    Renewable energy will play a crucial role in the future society of the 21st century. The various renewable energy sources need to be balanced and their use carefully planned since they are characterized by high temporal and spatial variability that will pose challenges to maintaining a well balanced supply and to the stability of the grid. This article examines the ways that future 'energy landscapes' can be modelled in time and space. Biomass needs a great deal of space per unit of energy produced but it is an energy carrier that may be strategically useful in circumstances where other renewable energy carriers are likely to deliver less. A critical question considered in this article is whether a massive expansion in the use of biomass will allow us to construct future scenarios while repositioning the 'energy landscape' as an object of study. A second important issue is the utilization of heat from biomass energy plants. Biomass energy also has a larger spatial footprint than other carriers such as, for example, solar energy. This article seeks to provide a bridge between energy modelling and spatial planning while integrating research and techniques in energy modelling with Geographic Information Science. This encompasses GIS, remote sensing, spatial disaggregation techniques and geovisualization. Several case studies in Austria and Germany demonstrate a top-down methodology and some results while stepwise calculating potentials from theoretical to technically feasible potentials and setting the scene for the definition of economic potentials based on scenarios and assumptions.

  9. Employee retention and integrated disability management practices as demand side factors.

    Science.gov (United States)

    Habeck, Rochelle; Hunt, Allan; Rachel, Colleen Head; Kregel, John; Chan, Fong

    2010-12-01

    Demand-side employment research on company policies and practices related to retention and absence and disability management (ADM) can contribute to our understanding of employment issues related to people with disabilities from the employers' perspective. To examine company ADM and retention practices and their effectiveness, as well as how these company policies and practices might influence hiring of people with disabilities. Disability Management Employer Coalition employer members (N = 650) were surveyed by internet and the survey data were analyzed using descriptive statistics, correlation, and multiple regression. Ninety-five participants responded to the survey resulting in a response rate of 14%. Retention practice was found to be associated with retention effectiveness (r = .39, P employees at every level, seeking the ideas and involvement of employees, and assuring they know how their work and performance support the mission. ADM practice was related to improving health and managing health conditions (r = .26, P employee-oriented culture (r = .23), safety/risk prevention (r = .21), and very early intervention (r = .21) correlated with delaying/preventing employment exits related to health impairment. Retention practice, ADM practice, retention effectiveness, ADM effectiveness and disability attitudes comprised a model to predict the hiring of people with disabilities. The six-predictor model was significant, F(6, 86) = 13.54, P employees who develop potentially disabling conditions; but they are not directly connected to hiring people with disabilities. These appear to be two different policy and practice issues within most companies.

  10. Electric power market liberalization and demand-side management (DSM); Denryoku shijo jiyuka to DSM

    Energy Technology Data Exchange (ETDEWEB)

    Yajima, M. [Central Research Institute of Electric Power Industry, Tokyo (Japan)

    1997-01-30

    This paper explains effects of market liberalization which will lead to introducing competition in electric power business on demand-side management (DSM), by quoting examples mainly in the United States. The paper also describes the future outlook thereon. The DSM program in the United States has expanded for the period between 1989 through 1994. However, during the last few years, the movements of electric power market liberalization have come to force electric power business entities to change their management strategies and reduction in expense. This situation has resulted in reduction in the DSM budget. Future DSM programs are thought to diversify into the following types: a program such as load management which has effect of reducing expenses and investments in investment time periods of 5 to 10 years, a program effective for users such as high-efficiency motors which have effects of reducing expenses and improving efficiency in investment time periods of 3 to 5 years, a program which will be effective enough if market barriers are removed after the market conversions, but requires subsidies and purchase guarantees, and a social program intended for environmental effects and low-income users. 4 refs., 1 tab.

  11. Can demand-side policies stop the tobacco industry's damage? Lessons from Turkey.

    Science.gov (United States)

    Gultekin-Karakas, Derya

    2015-01-01

    Trade and investment liberalisation in the post-1980 period allowed the penetration of transnational tobacco companies into the Turkish market. State control over the market was gradually removed and tobacco farming, manufacturing, trade and consumption were reshaped in line with the needs of transnational tobacco companies. The resultant increase in product proliferation and aggressive marketing strategies led to a dramatic rise in cigarette consumption in the 1990s, making Turkey a market with one of the sharpest consumption increases in the world. While Turkey implemented demand-side tobacco control policies to reduce consumption after 1996, it continued to stimulate manufacturing and trade in a conflicting way. The Turkish case verifies that the liberalisation process facilitated by the state under the auspices of international institutions conflicts with tobacco control. Liberalisation paves the way for market expansions of transnational tobacco companies that resist tobacco control in their drive for profit. Current global tobacco control policies, with no interest in controlling manufacturing, have limited effect on consumption. The Turkish case indicates the necessity of establishing public control over tobacco manufacturing and trade from a public health perspective.

  12. Industrial operations and maintenance demand-side management resource development: Literature and data review

    Energy Technology Data Exchange (ETDEWEB)

    Parker, S.A.; Gaustad, K.L.; Szydlowski, R.F.; Winiarski, D.W.

    1994-01-01

    Industry in the Pacific Northwest consumes a significant percentage of the total regional electric load; however, industrial demand-side management resource development activities in this sector are underdeveloped. One such opportunity for electricity resource development is through maintenance (O&M) activities. Despite the importance of industry in the Pacific Northwest, little information has been available on the DSM resource potential, particularly through O&M activities. To obtain this information, the Bonneville Power Administration commissioned Pacific Northwest Laboratory to study the DSM resource potential that may be achieved through O&M practices in Pacific Northwest industries. The information from this report will be used to identify one or more specific O&M activities or industries having significant opportunity for reducing electricity consumption for further evaluation in future tasks to this project. The overall goal of this project is to determine, confirm, and develop the conservation resources that can be achieved from O&M practices in Pacific Northwest industries. This project is developmental in nature because its scope involves a sizable task whose path and direction is difficult to define in advance. The primary focus of this report is to summarize the major findings of the literature and datareview. Detailed analysis and use of all data gathered in the review are beyond the scope this study. However, the reported findings in this analysis provide an extensive framework for identifying and estimating the electric resource potential available in the industrial manufacturing sector.

  13. Flow based vs. demand based energy-water modelling

    Science.gov (United States)

    Rozos, Evangelos; Nikolopoulos, Dionysis; Efstratiadis, Andreas; Koukouvinos, Antonios; Makropoulos, Christos

    2015-04-01

    The water flow in hydro-power generation systems is often used downstream to cover other type of demands like irrigation and water supply. However, the typical case is that the energy demand (operation of hydro-power plant) and the water demand do not coincide. Furthermore, the water inflow into a reservoir is a stochastic process. Things become more complicated if renewable resources (wind-turbines or photovoltaic panels) are included into the system. For this reason, the assessment and optimization of the operation of hydro-power systems are challenging tasks that require computer modelling. This modelling should not only simulate the water budget of the reservoirs and the energy production/consumption (pumped-storage), but should also take into account the constraints imposed by the natural or artificial water network using a flow routing algorithm. HYDRONOMEAS, for example, uses an elegant mathematical approach (digraph) to calculate the flow in a water network based on: the demands (input timeseries), the water availability (simulated) and the capacity of the transmission components (properties of channels, rivers, pipes, etc.). The input timeseries of demand should be estimated by another model and linked to the corresponding network nodes. A model that could be used to estimate these timeseries is UWOT. UWOT is a bottom up urban water cycle model that simulates the generation, aggregation and routing of water demand signals. In this study, we explore the potentials of UWOT in simulating the operation of complex hydrosystems that include energy generation. The evident advantage of this approach is the use of a single model instead of one for estimation of demands and another for the system simulation. An application of UWOT in a large scale system is attempted in mainland Greece in an area extending over 130×170 km². The challenges, the peculiarities and the advantages of this approach are examined and critically discussed.

  14. The study on energy demand forecast of Chongqing

    Institute of Scientific and Technical Information of China (English)

    YANGJia; WUXiangsheng

    2003-01-01

    Energy demand forecasting is the base for programming energy system. With the economy development, the increasing amount of energy consumption is in contradiction with the exhausted resource and destroyed environment. For the sake of the sustainable development, the reasonable energy demand forecasting is needed, and it is the scientific reference for establishing energy developing stratagem and energy policy. But the traditional forecasting methods at present have some Jimitations. Artificial neural network(ANN) is a new and developing subject, whose capability of adaptability and self-study is excellent. Based on the analysis as above, the forecasting model with artificial neural network was established. This model is based on the idea of time series. Compared with the traditional algorithm, this model is more friendly and maneuverability, which is not only able to forecast for a short term, but also able to forecast for a long period. Based on the fact of Chongqing, the energy demand of Chongqing is analyzed, and then it is forecasted from 2002 to 2020 with the model, and the forecasting results are reasonable.

  15. Single-Family Houses That Meet The Future Energy Demands

    DEFF Research Database (Denmark)

    Rose, Jørgen; Svendsen, Svend

    2002-01-01

    In 1990 the Danish Government decided to make an effort to reduce the heat demand of new buildings by 50% before the year 2000. In 1995 a new Building Code (Boligministeriet 1995) was introduced, which resulted in a 25% reduction compared to the previous Building Code (Boligministeriet 1988). Bef...... the department, in co-operation with a major building entrepreneur, has developed a single-family house that shows that there are no evident problems in meeting the future energy demands....... to examine these consequences thoroughly. The department is presently contributing to this end by participating in quite a few investigative projects, where single-family houses are designed to meet the proposed future energy demands. This paper describes the results obtained from one such project where...

  16. Structural Breaks, Parameter Stability and Energy Demand Modeling in Nigeria

    Directory of Open Access Journals (Sweden)

    Olusegun A. Omisakin

    2012-08-01

    Full Text Available This paper extends previous studies in modeling and estimating energy demand functions for both gasoline and kerosene petroleum products for Nigeria from 1977 to 2008. In contrast to earlier studies on Nigeria and other developing countries, this study specifically tests for the possibility of structural breaks/regime shifts and parameter instability in the energy demand functions using more recent and robust techniques. In addition, the study considers an alternative model specification which primarily captures the price-income interaction effects on both gasoline and kerosene demand functions. While the conventional residual-based cointegration tests employed fail to identify any meaningful long run relationship in both functions, the Gregory-Hansen structural break cointegration approach confirms the cointegration relationships despite the breakpoints. Both functions are also found to be stable under the period studied.The elasticity estimates also follow the a priori expectation being inelastic both in the long- and short run for the two functions.

  17. Energy Demands and Efficiency Strategies in Data Center Buildings

    Science.gov (United States)

    Shehabi, Arman

    2009-01-01

    Information technology (IT) is becoming increasingly pervasive throughout society as more data is digitally processed, stored, and transferred. The infrastructure that supports IT activity is growing accordingly, and data center energy demands have increased by nearly a factor of four over the past decade. This dissertation investigates how…

  18. Forecasting long-term energy demand of Croatian transport sector

    DEFF Research Database (Denmark)

    Pukšec, Tomislav; Krajačić, Goran; Lulić, Zoran

    2013-01-01

    predictions for the Croatian transport sector are presented. Special emphasis is given to different influencing mechanisms, both legal and financial. The energy demand predictions presented in this paper are based on an end-use simulation model developed and tested with Croatia as a case study. The model...

  19. Testing simulation and structural models with applications to energy demand

    Science.gov (United States)

    Wolff, Hendrik

    2007-12-01

    This dissertation deals with energy demand and consists of two parts. Part one proposes a unified econometric framework for modeling energy demand and examples illustrate the benefits of the technique by estimating the elasticity of substitution between energy and capital. Part two assesses the energy conservation policy of Daylight Saving Time and empirically tests the performance of electricity simulation. In particular, the chapter "Imposing Monotonicity and Curvature on Flexible Functional Forms" proposes an estimator for inference using structural models derived from economic theory. This is motivated by the fact that in many areas of economic analysis theory restricts the shape as well as other characteristics of functions used to represent economic constructs. Specific contributions are (a) to increase the computational speed and tractability of imposing regularity conditions, (b) to provide regularity preserving point estimates, (c) to avoid biases existent in previous applications, and (d) to illustrate the benefits of our approach via numerical simulation results. The chapter "Can We Close the Gap between the Empirical Model and Economic Theory" discusses the more fundamental question of whether the imposition of a particular theory to a dataset is justified. I propose a hypothesis test to examine whether the estimated empirical model is consistent with the assumed economic theory. Although the proposed methodology could be applied to a wide set of economic models, this is particularly relevant for estimating policy parameters that affect energy markets. This is demonstrated by estimating the Slutsky matrix and the elasticity of substitution between energy and capital, which are crucial parameters used in computable general equilibrium models analyzing energy demand and the impacts of environmental regulations. Using the Berndt and Wood dataset, I find that capital and energy are complements and that the data are significantly consistent with duality

  20. Study on energy demand function of korea considering replacement among energy sources and the structural changes of demand behavior

    Energy Technology Data Exchange (ETDEWEB)

    Moon, C.K. [Korea Energy Economics Institute, Euiwang (Korea, Republic of)

    1997-08-01

    If the necessity of careful study on energy function is mentioned, it should be stressed that energy investment not only needs a long gestation period but also, acts as the bottleneck in the production capacity of an economy when investment is not enough. Thereby, the adverse effect of an energy supply shortage is very big. Especially, the replacement/supplemental relationship between energy and capital which corresponds to the movement on the iso-quanta curve is believed to have a direct relation with the answer as to whether long-term economic development would be possible under an energy crisis and its influence on technology selection. Furthermore, the advantages of technological advances which correspond to the movement on the iso-quanta curve has a direct relation with the question whether long-term economic development would be possible under an energy crisis depending on whether its direction is toward energy-saving or energy-consuming. This study tackles the main issues and outlines of the quantitative approach method based on the accounting approach method for modeling energy demand, quantitative economics approach method, and production model. In order to model energy demand of the Korean manufacturing industry, related data was established and a positive analytical model is completed and presented based on these. 122 refs., 10 tabs.

  1. Demonstrating a small utility approach to demand-side program implementation

    Energy Technology Data Exchange (ETDEWEB)

    1991-10-01

    The US DOE awarded a grant to the Burlington Electric Department (B.E.D.) to test a demand-side management (DSM) demonstration program designed to quickly save a significant amount of power with little disruption to the utility's customers or its normal operations. B.E.D. is a small municipal utility located in northern Vermont, with a lengthy history of successful DSM involvement. In our grant application, we proposed to develop a replicable program and approach to DSM that might be useful to other small utilities and to write a report to enable such replication. We believe that this DSM program and/or individual program components are replicable. This report is designed to allow other utilities interested in DSM to replicate this program or specific program design features to meet their DSM goals. We also wanted to use the opportunity of this grant to test the waters of residential heating fuel-switching. We hoped to test the application of one fuel-switching technology, and to benefit from the lessons learned in developing a full-scale DSM program for this end- use. To this end the pilot effort has been very successful. In the pilot pressure we installed direct-vent gas fired space heaters sized as supplemental heating units in 44 residences heated solely by electric resistance heat. We installed the gas space heating units at no cost to the owners or residents. We surveyed participating customers. The results of those surveys are included in this report and preliminary estimates of winter peak capacity load reductions are also noted in this report.

  2. DEMONSTRATION OF THE ENVIRONMENTAL AND DEMAND-SIDE MANAGEMENT BENEFITS OF GRID-CONNECTED PHOTOVOLTAIC POWER SYSTEMS

    Science.gov (United States)

    This study investigated the pollutant emission reduction and demand-side management potential of 16 photovoltaic (PV) systems installed across the U.S. in 1993 and 1994. The project was sponsored by the U.S. Environmental Protection Agency (EPA) and 11 electric utilities. This ar...

  3. An empirical analysis of energy demand in Namibia

    Energy Technology Data Exchange (ETDEWEB)

    De Vita, G. [Oxford Brookes University (United Kingdom). Business School; Endresen, K. [Independent Energy Consultant, Winhoek (Namibia); Hunt, L.C. [University of Surrey, Guildford (United Kingdom). Dept. of Economics

    2006-12-15

    Using a unique database of end-user local energy data and the recently developed Autoregressive Distributed Lag (ARDL) bounds testing approach to cointegration, we estimate the long-run elasticities of the Namibian energy demand function at both aggregated level and by type of energy (electricity, petrol and diesel) for the period 1980-2002. Our main results show that energy consumption responds positively to changes in GDP and negatively to changes in energy price and air temperature. The differences in price elasticities across fuels uncovered by this study have significant implications for energy taxation by Namibian policy makers. We do not find any significant cross-price elasticities between different fuel types. (author)

  4. Low-flow appliances and household water demand: an evaluation of demand-side management policy in Albuquerque, New Mexico.

    Science.gov (United States)

    Price, James I; Chermak, Janie M; Felardo, Jeff

    2014-01-15

    Residential rebate programs for low-flow water devices have become increasingly popular as a means of reducing urban water demand. Although program specifics vary, low-flow rebates are available in most U.S. metropolitan areas, as well as in many smaller municipalities. Despite their popularity, few statistical analyses have been conducted regarding the effects of low-flow rebates on household water use. In this paper, we consider the effects of rebates from the Albuquerque Bernalillo County Water Utility Authority (ABCWUA). Using panel regression techniques with a database of rebate recipients, we estimate the marginal effects of various low-flow devices on household water demand. Results indicate a negative correlation between household water use and the presence of most low-flow devices, after controlling for water price and weather conditions. Low-flow toilets have the greatest impact on water use, while low-flow washing machines, dishwashers, showerheads, and xeriscape have smaller but significant effects. In contrast, air conditioning systems, hot water recirculators, and rain barrels have no significant impact on water use. We also test for possible rebound effects (i.e. whether low-flow appliances become less-effective over time due to poor rates of retention or behavioral changes) and compare the cost effectiveness of each rebate using levelised-costs. We find no evidence of rebound effects and substantial variation in levelised-costs, with low-flow showerheads being the most cost-effective device under the current ABCWUA rebate program. The latter result suggests that water providers can improve the efficiency of rebate programs by targeting the most cost-effective devices.

  5. Supply-side collaboration for energy-efficient renovations

    NARCIS (Netherlands)

    Straub, A.; Mlecnik, E.

    2015-01-01

    The supply side for nearly zero energy building (nZEB) renovation of owner-occupied single-family houses in Europe is suffering from a severe image problem of lack of knowledge and trust, inefficient construction processes, insufficient quality assurance and communication difficulties with home-owne

  6. Supply-side collaboration for energy-efficient renovations

    NARCIS (Netherlands)

    Straub, A.; Mlecnik, E.

    2015-01-01

    The supply side for nearly zero energy building (nZEB) renovation of owner-occupied single-family houses in Europe is suffering from a severe image problem of lack of knowledge and trust, inefficient construction processes, insufficient quality assurance and communication difficulties with home-owne

  7. Supply-side collaboration for energy-efficient renovations

    NARCIS (Netherlands)

    Straub, A.; Mlecnik, E.

    2015-01-01

    The supply side for nearly zero energy building (nZEB) renovation of owner-occupied single-family houses in Europe is suffering from a severe image problem of lack of knowledge and trust, inefficient construction processes, insufficient quality assurance and communication difficulties with

  8. Demand for Energy and Energy Generation: Does Regional Energy Policy Play a Role?

    Directory of Open Access Journals (Sweden)

    Paul OJEAGA

    2014-06-01

    Full Text Available Does regional energy policy play a role in regional energy generation? What does the implication of the current industrialization trend mean for the generation and the supply process across regions? And to what extent does regional energy policy affect energy security (energy supply risks in regions? This study investigates the effect of regional energy policy on regional generation characteristics in seven regions of the World using regional panel data from 1980 to 2010 a period of 31 years although some years of data are missing. It was found that regional energy policy were been shaped by pollution concerns and that cost reduction needs had strong effects on energy security (energy generation resources supply. The method of estimation used is the quantile regression estimation method which provides robust estimates after controlling for heterscedastic errors and is robust in the presence of outliers in the response measurement. Energy policy has strong implication for access to sustainable supply of energy generation resources however it had little or no effect on energy generation itself. Industrial demand for energy particularly in the developed countries were probably also making developed countries depend on more nuclear and hydro energy generation sources.

  9. Seismic Energy Demand of Buckling-Restrained Braced Frames

    Science.gov (United States)

    Choi, Hyunhoon; Kim, Jinkoo

    2008-07-01

    In this study seismic analyses of steel structures were carried out to examine the effect of ground motion characteristics and structural properties on energy demands using 60 earthquake ground motions recorded in different soil conditions, and the results were compared with those of previous works. Analysis results show that ductility ratios and the site conditions have significant influence on input energy. The ratio of hysteretic to input energy is considerably influenced by the ductility ratio and the strong motion duration. It is also observed that as the predominant periods of the input energy spectra are significantly larger than those of acceleration response spectra used in the strength design, the strength demand on a structure designed based on energy should be checked especially in short period structures. For that reason framed structures with buckling-restrained-braces (BRBs) were designed in such a way that all the input energy was dissipated by the hysteretic energy of the BRBs, and the results were compared with those designed by conventional strength-based design procedure.

  10. Deliverable 6 of Changing Behaviour. Conceptual framework and model. Synthesis report tailored for policy makers as target group. A practical and conceptual framework of intermediary demand-side practice

    Energy Technology Data Exchange (ETDEWEB)

    Mourik, R.M.; Feenstra, C.F.J.; Breukers, S. [ECN Policy Studies, Petten (Netherlands); Heiskanen, E.; Rask, M.; Saastamoinen, M.; Johnson, M. [National Consumer Research Centre NCRC, Helsinki (Finland); Barabanova, Y.; Pariag, J. [Central European University CEU, Budapest (Hungary); Bauknecht, D.; Brohmann, B.; Buerger, V. [Institute for Applied Ecology OEKO, Freiburg (Germany); Hodson, M.; Marvin, S. [The SURF Centre, University of Salford, Manchester (United Kingdom); Jalas, M.; Rinne, S.; Salminnen, J. [Enespa Ltd. (Finland); Maier, P.; Meinel, H. [Verbraucherzentrale Nordrhein-Westfalen e.V. VZ NRW, Duesseldorf (Germany); Robinson, S. [Manchester Knowledge Capital MKC, Manchester Enterprises ME, Manchester (United Kingdom); Valuntiene, I. [Cowi Baltic, Vilnius (Lithuania); Vadovics, E. [GreenDependent Sustainable Solutions Association, Magyarorszag (Hungary)

    2009-10-15

    Changing Behaviour is a project that aims to support change in energy use and energy services by applying social research on technological change to practical use. The focus is on the interaction between energy experts and energy users: How can these different groups learn to understand each other better. D6 presents a practical and conceptual framework of intermediary demand-side practice. This framework follows from the comprehensive body of knowledge that has resulted from theoretical investigation and empirical research (D5). D6 conceptualises the relationships that must be taken into account to develop demand side programmes which address context, timing and actors to promote durable behavioural changes. D6 targets policymakers and those working with demand side management projects and includes recommendations for both.

  11. Heating Energy and Peak-Power Demand in a Standard and Low Energy Building

    Directory of Open Access Journals (Sweden)

    Miimu Airaksinen

    2013-01-01

    Full Text Available Building energy efficiency legislation has traditionally focused on space heating energy consumption. This has led to a decrease in energy consumption, especially in space heating. However, in the future when more renewable energy is used both on site and in energy systems, the peak energy demand becomes more important with respect to CO2 emissions and energy security. In this study it was found out the difference between space heating energy consumption was 55%–62% when a low energy and standard building were compared. However, the difference in peak energy demands was only 28%–34%, showing the importance of paying attention to the peak demands as well. 

  12. An Algorithmic Game Approach for Demand Side Management in Smart Grid with Distributed Renewable Power Generation and Storage

    Directory of Open Access Journals (Sweden)

    Ren-Shiou Liu

    2016-08-01

    Full Text Available In this paper, the problem of minimizing electricity cost and the peak system load in smart grids with distributed renewable energy resources is studied. Unlike prior research works that either assume all of the jobs are interruptible or power-shiftable, this paper focuses on more challenging scenarios in which jobs are non-interruptible and non-power-shiftable. In addition, as more and more newly-built homes have rooftop solar arrays, it is assumed that all users are equipped with a solar-plus-battery system in this paper. Thus, power can be drawn from the battery as needed to reduce the cost of electricity or to lower the overall system load. With a quadratic load-dependent cost function, this paper first shows that the electricity cost minimization problem in such a setting is NP-hard and presents a distributed demand-side management algorithm, called DDSM, to solve this. Experimental results show that the proposed DDSM algorithm is effective, scalable and converges to a Nash equilibrium in finite rounds.

  13. ENVIRONMENTAL IMPLICATIONS OF THE INCREASING DEMAND FOR ENERGY

    Directory of Open Access Journals (Sweden)

    Perticas Diana

    2012-07-01

    Full Text Available During human society’s development on large geographical areas, a series of cultural systems have appeared and have determined a certain approach concerning the environment and social relations. These systems of thought persist even today and they are strongly influenced by individuals’ thinking and approaches in that society, thing that requires a specific approach for the implementation of these relatively new concepts (e.g. sustainable development, pollution, ecological approaches on social life. Furthermore, the continuous growth of the demand for energy in the world is seen as an alarm. Between 1970 and 1997 world energy consumption has almost doubled and it is projected to grow by about 57% during 2004-2030 and the thing which should be mentioned is that with the increasing energy demand, pollution levels will increase too. But we must not forget that electric and thermal power represent one of the basic needs of mankind, and when the fulfilment of this need started to affect the climate and implicitly human health this problem turned into a hardly manageable one. We must not forget that the world’s population is growing rapidly and the level of pollution per capita increased we might even say in direct proportion. In many cases, increased pollution has its explanation in the growing number of individuals at global level and also the increasing needs, desires, aspirations, standard of living, of these. This paper intends to objectively analyse the interconnections that arise between the environment and the growth of the demand for energy, emphasizing the devastating effects of pollution created by burning fossil fuels in order to obtain electric and thermal power as well as the current and future possibilities for the replacement of these energy reserves with renewable energy reserves. The whole analysis will be accompanied by case studies and will follow strictly imposed goals by sustainable development.

  14. Demand Response Resources for Energy and Ancillary Services (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Hummon, M.

    2014-04-01

    Demand response (DR) resources present a potentially important source of grid flexibility particularly on future systems with high penetrations of variable wind an solar power generation. However, DR in grid models is limited by data availability and modeling complexity. This presentation focuses on the co-optimization of DR resources to provide energy and ancillary services in a production cost model of the Colorado test system. We assume each DR resource can provide energy services by either shedding load or shifting its use between different times, as well as operating

  15. Evaluation of biomass combustion based energy systems by cumulative energy demand and energy yield coefficient

    Energy Technology Data Exchange (ETDEWEB)

    Nussbaumer, T.; Oser, M.

    2004-07-01

    This final report prepared for the International Energy Agency (IEA) Bioenergy Task 32 presents a method for a comparison of different energy systems with respect to the overall energy yield during their life cycles. For this purpose, the Cumulative Energy Demand (CED) based on primary energy and the Energy Yield Factor (EYC) are introduced and determined for the following scenarios: Log wood, wood chips, and wood pellets for residential heating and - except for log wood - also for district heating. As an alternative to heat production, power production via combustion and use of the electricity for decentralised heat pumps is also looked at. The evaluation and comparison of both the EYC for all fuels and the EYC{sub N}R for the non-renewable part enables a ranking of energy systems without a subjective weighing of non-renewable and renewable fuels to be made. For a sustainable energy supply, it is proposed to implement renewable energy systems in future which achieve an energy yield EYC{sub N}R of at least greater than 2 but favourably greater than 5. The evaluation of the different scenarios presented is proposed as the future basis for the choice of the most efficient energy systems based on biomass combustion.

  16. Demand-driven energy supply from stored biowaste for biomethanisation.

    Science.gov (United States)

    Aichinger, Peter; Kuprian, Martin; Probst, Maraike; Insam, Heribert; Ebner, Christian

    2015-10-01

    Energy supply is a global hot topic. The social and political pressure forces a higher percentage of energy supplied by renewable resources. The production of renewable energy in form of biomethane can be increased by co-substrates such as municipal biowaste. However, a demand-driven energy production or its storage needs optimisation, the option to store the substrate with its inherent energy is investigated in this study. The calorific content of biowaste was found unchanged after 45 d of storage (19.9±0.19 kJ g(-1) total solids), and the methane yield obtained from stored biowaste was comparable to fresh biowaste or even higher (approx. 400 m(3) Mg(-1) volatile solids). Our results show that the storage supports the hydrolysis of the co-substrate via acidification and production of volatile fatty acids. The data indicate that storage of biowaste is an efficient way to produce bioenergy on demand. This could in strengthen the role of biomethane plants for electricity supply the future. Copyright © 2015 Elsevier Ltd. All rights reserved.

  17. Energy demand for materials in an international context.

    Science.gov (United States)

    Worrell, Ernst; Carreon, Jesus Rosales

    2017-06-13

    Materials are everywhere and have determined society. The rapid increase in consumption of materials has led to an increase in the use of energy and release of greenhouse gas (GHG) emissions. Reducing emissions in material-producing industries is a key challenge. If all of industry switched to current best practices, the energy-efficiency improvement potential would be between 20% and 35% for most sectors. While these are considerable potentials, especially for sectors that have historically paid a lot of attention to energy-efficiency improvement, realization of these potentials under current 'business as usual' conditions is slow due to a large variety of barriers and limited efforts by industry and governments around the world. Importantly, the potentials are not sufficient to achieve the deep reductions in carbon emissions that will be necessary to stay within the climate boundaries as agreed in the 2015 Paris Conference of Parties. Other opportunities need to be included in the menu of options to mitigate GHG emissions. It is essential to develop integrated policies combining energy efficiency, renewable energy and material efficiency and material demand reduction, offering the most economically attractive way to realize deep reductions in carbon emissions.This article is part of the themed issue 'Material demand reduction'. © 2017 The Author(s).

  18. Three Essays Examining Household Energy Demand and Behavior

    Science.gov (United States)

    Murray, Anthony G.

    This dissertation consists of three essays examining household energy decisions and behavior. The first essay examines the adoption of energy efficient Energy Star home appliances by U.S. households. Program effectiveness requires that consumers be aware of the labeling scheme and also change their purchase decisions based on label information. The first essay examines the factors associated with consumer awareness of the Energy Star label of recently purchased major appliances and the factors associated with the choice of Energy Star labeled appliances. The findings suggest that eliminating identified gaps in Energy Star appliance adoption would result in house electricity cost savings of $164 million per year and associated carbon emission reductions of about 1.1 million metric tons per year. The second essay evaluates household energy security and the effectiveness of the Low-Income Home Energy Assistance Program (LIHEAP), the single largest energy assistance program available to poor households within the United States. Energy security is conceptually akin to the well-known concept of food security. Rasch models and household responses to energy security questions in the 2005 Residential Energy Consumption Survey are used to generate an energy insecurity index that is consistent with those found in the food insecurity literature. Participating in LIHEAP is found to significantly reduce household energy insecurity score in the index. Further, simulations show that the elimination of the energy assistance safety net currently available to households increases the number of energy insecure house- holds by over 16 percent. The third essay develops a five equation demand system to estimate household own-price, cross-price and income elasticities between electricity, natural gas, food at home, food away from home, and non-durable commodity groups. Household cross-price elasticities between energy and food commodities are of particular importance. Energy price shocks

  19. Increasing access to institutional deliveries using demand and supply side incentives: early results from a quasi-experimental study

    Directory of Open Access Journals (Sweden)

    Serwadda David

    2011-03-01

    Full Text Available Abstract Background Geographical inaccessibility, lack of transport, and financial burdens are some of the demand side constraints to maternal health services in Uganda, while supply side problems include poor quality services related to unmotivated health workers and inadequate supplies. Most public health interventions in Uganda have addressed only selected supply side issues, and universities have focused their efforts on providing maternal services at tertiary hospitals. To demonstrate how reforms at Makerere University College of Health Sciences (MakCHS can lead to making systemic changes that can improve maternal health services, a demand and supply side strategy was developed by working with local communities and national stakeholders. Methods This quasi-experimental trial is conducted in two districts in Eastern Uganda. The supply side component includes health worker refresher training and additions of minimal drugs and supplies, whereas the demand side component involves vouchers given to pregnant women for motorcycle transport and the payment to service providers for antenatal, delivery, and postnatal care. The trial is ongoing, but early analysis from routine health information systems on the number of services used is presented. Results Motorcyclists in the community organized themselves to accept vouchers in exchange for transport for antenatal care, deliveries and postnatal care, and have become actively involved in ensuring that women obtain care. Increases in antenatal, delivery, and postnatal care were demonstrated, with the number of safe deliveries in the intervention area immediately jumping from Conclusions Transport and service vouchers appear to be a viable strategy for rapidly increasing maternal care. MakCHS can design strategies together with stakeholders using a learning-by-doing approach to take advantage of community resources.

  20. What makes health demand-side financing schemes work in low- and middle-income countries? A realist review

    Directory of Open Access Journals (Sweden)

    Saji S. Gopalan

    2014-12-01

    Full Text Available This realist review explored causal pathways of the possible consumer effects of health sector demand-side financial (DSF incentives, their contextual factors and mechanisms in low-and-middle-income countries. We searched six electronic data bases and identified 659 abstracts with different evaluation designs. Based on methodological rigor and content relevance, only 24 studies published up to April 2013 were selected for the final review. A conceptual framework consisting of various program theories on potential context-mechanism-outcome (C-M-O configuration of DSF initiative was designed, tested and adapted during the review. Synthesized results were presented as a C-M-O configuration for each of the consumer-side effect. DSF was effective to improve health seeking behaviour considerably and health status to some extent. The causal pathway of DSF’s functioning and effectiveness was not linear. Key demand-side contextual factors which affected DSF’s consumer-side effects were background characteristics of the beneficiaries including their socio-cultural beliefs, motivations, and level of health awareness. At the supply-side, service availability status and provider incentives were contextual determinants. The mechanisms which enabled the interaction of contextual influence were consumer and provider accountability and consumer trust on providers. In order to enhance DSF programs’ effectiveness, their design and implementation should carefully consider the potential contextual elements that may influence the causal pathways.

  1. Modelling of Sudan’s Energy Supply, Transformation, and Demand

    Directory of Open Access Journals (Sweden)

    Ali A. Rabah

    2016-01-01

    Full Text Available The study aimed to develop energy flow diagram (Sankey diagram of Sudan for the base year 2014. The developed Sankey diagram is the first of its kind in Sudan. The available energy balance for the base year 2012 is a simple line draw and did not count the energy supply by private and mixed sectors such as sugar and oil industries and marine and civil aviation. The private and mixed sectors account for about 7% of the national grid electric power. Four energy modules are developed: resources, transformation, demand, and export and import modules. The data are obtained from relevant Sudanese ministries and directorates and Sudan Central Bank. “e!Sankey 4 pro” software is used to develop the Sankey diagram. The main primary types of energy in Sudan are oil, hydro, biomass, and renewable energy. Sudan has a surplus of gasoline, petroleum coke, and biomass and deficit in electric power, gasoil, jet oil, and LPG. The surplus of gasoline is exported; however, the petroleum coke is kept as reserve. The deficit is covered by import. The overall useful energy is 76% and the loss is 24%. The useful energy is distributed among residential (38%, transportation (33%, industry (12%, services (16%, and agriculture (1% sectors.

  2. Japan's Residential Energy Demand Outlook to 2030 Considering Energy Efficiency Standards"Top-Runner Approach"

    Energy Technology Data Exchange (ETDEWEB)

    Lacommare, Kristina S H; Komiyama, Ryoichi; Marnay, Chris

    2008-05-15

    As one of the measures to achieve the reduction in greenhouse gas emissions agreed to in the"Kyoto Protocol," an institutional scheme for determining energy efficiency standards for energy-consuming appliances, called the"Top-Runner Approach," was developed by the Japanese government. Its goal is to strengthen the legal underpinnings of various energy conservation measures. Particularly in Japan's residential sector, where energy demand has grown vigorously so far, this efficiency standard is expected to play a key role in mitigating both energy demand growth and the associated CO2 emissions. This paper presents an outlook of Japan's residential energy demand, developed by a stochastic econometric model for the purpose of analyzing the impacts of the Japan's energy efficiency standards, as well as the future stochastic behavior of income growth, demography, energy prices, and climate on the future energy demand growth to 2030. In this analysis, we attempt to explicitly take into consideration more than 30 kinds of electricity uses, heating, cooling and hot water appliances in order to comprehensively capture the progress of energy efficiency in residential energy end-use equipment. Since electricity demand, is projected to exhibit astonishing growth in Japan's residential sector due to universal increasing ownership of electric and other appliances, it is important to implement an elaborate efficiency standards policy for these appliances.

  3. Energy demand, energy substitution and economic growth : Evidence from developed and developing countries

    Science.gov (United States)

    Abd Aziz, Azlina

    This thesis contributes to the literature on energy demand in three ways. Firstly, it examines the major determinants of energy demand using a panel of 23 developed countries and 16 developing countries during 1978 to 2003. Secondly, it examines the demand for energy in the industrial sector and the extent of inter-fuel substitution, as well as substitution between energy and non-energy inputs, using data from 5 advanced countries and 5 energy producer's developing countries. Third, the thesis investigates empirically the relationship between energy consumption and economic growth for these groups of countries over a 26-year period. The empirical results of this study confirm the majority of the findings in energy demand analysis. Income and price have shown to be important determinants for energy consumption in both developed and developing countries. Moreover, both economic structure and technical progress appear to exert significant impacts on energy consumption. Income has a positive impact on energy demand and the effect is larger in developing countries. In both developed and developing countries, price has a negative impact but these effects are larger in developed countries than in developing countries. The share of industry in GDP is positive and has a greater impact on energy demand in developing countries, whereas technological progress is found to be energy using in developed countries and energy saving in developing countries. With respect to the analysis of inter-factor and inter-fuel substitution in industrial energy demand, the results provide evidence for substitution possibilities between factor inputs and fuels. Substitutability is observed between capital and energy, capital and labour and labour and energy. These findings confirm previous evidence that production technologies in these countries allow flexibility in the capital-energy, capital-labour and labour-energy mix. In the energy sub-model, the elasticities of substitution show that large

  4. Deliverable 4 of Changing Behaviour. Past 10 year of best and bad practices in demand management. A meta analysis of 27 case studies focusing on conditions explaining success and failure of demand-side management programmes

    Energy Technology Data Exchange (ETDEWEB)

    Mourik, R.M.; Backhaus, J.; Feenstra, C.F.J.; Breukers, S. [ECN Policy Studies, Petten (Netherlands); Heiskanen, E.; Rask, M.; Saastamoinen, M.; Johnson, M. [National Consumer Research Centre NCRC, Helsinki (Finland); Anttonen, M. [Helsinki School of Economics, Helsinki (Finland); Barabanova, Y.; Pariag, J. [Central European University CEU, Budapest (Hungary); Bauknecht, D.; Bern, M.R.; Brohmann, B.; Buerger, V. [Institute for Applied Ecology OEKO, Freiburg (Germany); Hodson, M.; Liang, V.; Marvin, S. [The SURF Centre, University of Salford, Manchester (United Kingdom); Jalas, M.; Rinne, S.; Salminnen, J. [Enespa Ltd. (Finland); Kallaste, T. [Stockholm Environment Institute SEI, Tallinn Centre SEI-T, Tallinn (Estonia); Kamenders, A. [Ekodoma Ltd, Riga (Latvia); Malamatenios, C.; Papandreou, V. [Centre for Renewable Energy Sources CRES, Pikermi Attiki (Greece); Maier, P.; Meinel, H. [Verbraucherzentrale Nordrhein-Westfalen e.V. VZ NRW, Duesseldorf (Germany); Robinson, S. [Manchester Knowledge Capital MKC, Manchester Enterprises ME, Manchester (United Kingdom); Valuntiene, I. [Cowi Baltic, Vilnius (Lithuania); Vadovics, E. [GreenDependent Sustainable Solutions Association, Magyarorszag (Hungary)

    2009-10-15

    Changing Behaviour is a project that aims to support change in energy use and energy services by applying social research on technological change to practical use. The focus is on the interaction between energy experts and energy users: How can these different groups learn to understand each other better. Demand-side programmes have exhibited a range of more and less successful results, but the reasons for success or failure are not fully understood. Deliverable 4 presents a meta-analysis of 27 case studies from various EU countries. It makes an in-depth analysis of causes for success and failure, with a special focus on the role of context, timing and actors.

  5. Energy demand and mix for global welfare and stable ecosystems

    Energy Technology Data Exchange (ETDEWEB)

    Jess, A.; Kern, C.; Kaiser, P.

    2012-07-01

    Social indicators show that an annual energy consumption of 2 tonnes of oil equivalent per capita (toe pc) should be enough to ensure a sufficient global average level of welfare and happiness. Hence, rich countries with currently up to 8 toe pc should reduce and poor should legitimately increase their energy demand until 2 toe pc are reached. At today's global energy mix with 80% fossil fuels, even this optimistic scenario will inevitably lead to a conflict between welfare and stable ecosystems. The population will be 9 billion by 2050 and the ecological footprint would rise from today 1.5 to 2 planet Earths. The only option to reach the desired footprint of one planet Earth is a complete shift from fossil fuels to renewables. (orig.)

  6. Forecast of transportation energy demand through the year 2010

    Energy Technology Data Exchange (ETDEWEB)

    Mintz, M.M.; Vyas, A.D.

    1991-04-01

    Since 1979, the Center for Transportation Research (CTR) at Argonne National Laboratory (ANL) has produced baseline projections of US transportation activity and energy demand. These projections and the methodologies used to compute them are documented in a series of reports and research papers. As the lastest in this series of projections, this report documents the assumptions, methodologies, and results of the most recent projection -- termed ANL-90N -- and compares those results with other forecasts from the current literature, as well as with the selection of earlier Argonne forecasts. This current forecast may be used as a baseline against which to analyze trends and evaluate existing and proposed energy conservation programs and as an illustration of how the Transportation Energy and Emission Modeling System (TEEMS) works. (TEEMS links disaggregate models to produce an aggregate forecast of transportation activity, energy use, and emissions). This report and the projections it contains were developed for the US Department of Energy's Office of Transportation Technologies (OTT). The projections are not completely comprehensive. Time and modeling effort have been focused on the major energy consumers -- automobiles, trucks, commercial aircraft, rail and waterborne freight carriers, and pipelines. Because buses, rail passengers services, and general aviation consume relatively little energy, they are projected in the aggregate, as other'' modes, and used primarily as scaling factors. These projections are also limited to direct energy consumption. Projections of indirect energy consumption, such as energy consumed in vehicle and equipment manufacturing, infrastructure, fuel refining, etc., were judged outside the scope of this effort. The document is organized into two complementary sections -- one discussing passenger transportation modes, and the other discussing freight transportation modes. 99 refs., 10 figs., 43 tabs.

  7. Growing Energy Demand ProvidesImmense Opportunities to Chinese Investors:Minister Naveed Qamar

    Institute of Scientific and Technical Information of China (English)

    Audrey Guo

    2011-01-01

    Fdoeral Minister for Water and wer of Pakistan,Syed Naveed Qamar said that the growing energy demand in Pakistan is a challenge for the government,yet it provides immense opportunities for Chinese investors to contribute towards reducing energy shortage in the country while sharing the benefits on August 2,2011.Leading the Pakistani delegation in the 1st China-Pakistan Joint Energy Working Group (JEWG) meeting in Beijing,the Minister thanked the Chinese government “for extending every possible support to Pakistan at all times,especially in the hours of need.”Qian Zhimin,Deputy Administrator of National Energy Administration (NEA) of the National Development Reform Commission of China led the Chinese side in the largely attended JEWG meeting.

  8. A Danish Heat Atlas for Supply Strategies and Demand Side Management

    DEFF Research Database (Denmark)

    Möller, Bernd

    heat demand and possible savings. The location of each building relative to heat supply technologies is mapped and used for the assessment of supply strategies by potentials, costs and environmental impact. Both elements can furthermore be used to balance investments in supply with investments......The expansion of district heating, the assessment of the impact of heat supply strategies, as well as the analysis of significant heat demand savings require sound decision support at high detail. Data is needed to continuously quantify potentials and costs of measures in the end-use and supply...

  9. Proceedings of the Chinese-American symposium on energy markets and the future of energy demand

    Energy Technology Data Exchange (ETDEWEB)

    Meyers, S. (ed.)

    1988-11-01

    The Symposium was organized by the Energy Research Institute of the State Economic Commission of China, and the Lawrence Berkeley Laboratory and Johns Hopkins University from the United States. It was held at the Johns Hopkins University Nanjing Center in late June 1988. It was attended by about 15 Chinese and an equal number of US experts on various topics related to energy demand and supply. Each presenter is one of the best observers of the energy situation in their field. A Chinese and US speaker presented papers on each topic. In all, about 30 papers were presented over a period of two and one half days. Each paper was translated into English and Chinese. The Chinese papers provide an excellent overview of the emerging energy demand and supply situation in China and the obstacles the Chinese planners face in managing the expected increase in demand for energy. These are matched by papers that discuss the energy situation in the US and worldwide, and the implications of the changes in the world energy situation on both countries. The papers in Part 1 provide historical background and discuss future directions. The papers in Part 2 focus on the historical development of energy planning and policy in each country and the methodologies and tools used for projecting energy demand and supply. The papers in Part 3 examine the pattern of energy demand, the forces driving demand, and opportunities for energy conservation in each of the major sectors in China and the US. The papers in Part 4 deal with the outlook for global and Pacific region energy markets and the development of the oil and natural gas sector in China.

  10. Dynamic Behaviour of a Population of Controlled-by-price Demand Side Resources

    DEFF Research Database (Denmark)

    Sossan, Fabrizio; Han, Xue; Bindner, Henrik W.

    2014-01-01

    It is described that controlling or shedding by price the power consumption of a population of thermostatic loads introduces in the aggregate consumption dynamic effects th at cannot be disregarded if electrical flexible demand is meant to supply power system services. It is shown that inducing...

  11. Research on development of electric power demand side response%电力需求侧响应发展研究综述

    Institute of Scientific and Technical Information of China (English)

    伍伟华; 庞建军; 陈广开; 王薪与

    2014-01-01

    Implementation of demand side response (DR) brings many benefits to the energy consumers,the power system and society. Based on the developing status and related researches of demand side response in the domestic and overseas,the present paper discuses different demand response projects existing in the world, summarizes implementation methods of price-based DR and incentive-based DR programs,illustrates the relationship of this two types in the system operation and generation planning and their effect on the system, introduces demand response 2.0 (DR2.0)in U.S, and at last, makes recommendations to the development of demand response in China.%实施电力需求侧响应(DR)能为用户侧、系统侧和社会带来诸多效益。本文基于国内外的电力需求侧响应(DR)发展现状及相关的研究,对国际上现有的需求侧响应项目进行深入的分类讨论,总结了基于价格和基于激励的需求侧响应项目的实施方法,说明了两类需求侧响应在系统运行与规划时的关系及其对系统的作用,介绍了美国需求侧响应的发展规划(DR2.0)。最后针对我国需求侧响应发展现状提出建议。

  12. Free energy option and its relevance to improve domestic energy demands in southern Nigeria

    Directory of Open Access Journals (Sweden)

    Moses Eterigho Emetere

    2016-11-01

    Full Text Available The aim of this paper is to seek an energy option that would benefit the growing energy demands. Domestic energy demands in southern Nigeria had increased greatly due to failing power programs and seasonal migrations. The fossil fuel option is gradually fading away due to environmental pollution and recent dynamic cost. The renewable energy option had been celebrated with little success in the coastal area of southern Nigeria. At the moment, the renewable energy option is very expensive with little guarantee on its efficiency with time. The data set used for this study was obtained from the Davis weather installation in Covenant University. The free energy option was considered. The cost and its environmental implication for domestic use were comparatively discussed alongside other energy options — using the Life cycle cost analysis. It was found out that free energy option is more affordable and efficient for domestic use.

  13. Satisfying the Energy Demand of a Rural Area by Considering the Investment on Renewable Energy Alternatives and Depreciation Costs

    Directory of Open Access Journals (Sweden)

    Masoud Rabbani

    2014-01-01

    Full Text Available In this paper, a fuzzy multiobjective model which chooses the best mix of renewable energy options and determines the optimal amount of energy to be transferred from each resource to each end use is proposed. The depreciation of equipment along with time value of money has been taken into account in the first objective function while the second and the third objective functions minimize the greenhouse gas emissions and water consumption, respectively. Also, this study is one of the pioneer works that has considered demand-side management (DSM as a competitive option against supply-side alternatives for making apt energy planning decisions. Moreover, the intrinsic uncertainty of demand parameter is considered and modeled by fuzzy numbers. To convert the proposed fuzzy multiobjective formulation to a crisp single-objective formulation the well-known fuzzy goal programming approach together with Jimenez defuzzifying technique is employed. The model is validated through setting up a diversity of datasets whose data were mostly derived from the literature. The obtained results show that DSM programs have greatly contributed to cost reductions in the network. Also, it is concluded that the model is capable of solving even large-scaled instances of problems in negligible central processing unit (CPU times using Lingo 8.0 software.

  14. The scale of infrastructure and economic growth:A perspective from demand side

    Institute of Scientific and Technical Information of China (English)

    刘阳; 秦凤鸣

    2009-01-01

    This paper analyzes the relationship between the stock of infrastructure and income increases using data from 15 typical countries,including China,and measures the gap between China and npper-middlle-income countries using the Euclidean distance.By constructing a domestic infrastructure investment demand model,this paper provides the basis for determining the growth rates for infrastructure investment demand under the given economic development goals and assessing the rationality of such growth rates.The paper finds that,as the per-capita income level increases, the total infrastructure demand rises but different types of infrastructure stock grow at different paces.Using the 2004 domestic infrastructure level as the benchmark for international comparison,we find it imperative for China to further boost resource infrastructure construction in the future and keep resource infrastructure investment growing at an average annual rate of 15%-24%.The infrastructure investment growth rate should be kept above the nominal GDP growth rate.

  15. Supply- and Demand-Side Factors Influencing Utilization of Infant and Young Child Feeding Counselling Services in Viet Nam.

    Science.gov (United States)

    Nguyen, Phuong H; Kim, Sunny S; Nguyen, Tuan T; Tran, Lan M; Hajeebhoy, Nemat; Frongillo, Edward A; Ruel, Marie T; Rawat, Rahul; Menon, Purnima

    2016-01-01

    Adequate utilization of services is critical to maximize the impact of counselling on infant and young child feeding (IYCF), but little is known about factors affecting utilization. Our study examined supply- and demand-side factors associated with the utilization of IYCF counselling services in Viet Nam. We used survey data from mothers with children Higher maternal education was associated with higher utilization both for one-time and repeated use. Being a farmer, belonging to an ethnic minority, and having a wasted child were associated with greater likelihood of achieving the minimum recommended number of visits, whereas child stunting or illness were not. Distance to health center was a barrier to repeated visits. Among supply-side factors, good counselling skills (PR: 1.3-1.8) was the most important factor associated with any service use, whereas longer employment duration and greater work pressure of health center staff were associated with lower utilization. Population attributable risk estimations showed that an additional 25% of the population would have achieved the minimum number of visits if exposed to three demand-generation strategies, and further increased to 49% if the health staff had good counseling skills and low work pressure. Our study provides evidence that demand-generation strategies are essential to increase utilization of facility-based IYCF counselling services in Viet Nam, and may be relevant for increasing and sustaining use of nutrition services in similar contexts.

  16. Visualized study on specific points on demand curves and flow patterns in a single-side heated narrow rectangular channel

    Energy Technology Data Exchange (ETDEWEB)

    Wang Junfeng [CNNC Key Laboratory on Reactor Thermo-Hydraulics Technology, Nuclear Power Institute of China, Chengdu, Sichuan (China); Huang Yanping, E-mail: hypgroup@163.com [CNNC Key Laboratory on Reactor Thermo-Hydraulics Technology, Nuclear Power Institute of China, Chengdu, Sichuan (China); Wang Yanlin [CNNC Key Laboratory on Reactor Thermo-Hydraulics Technology, Nuclear Power Institute of China, Chengdu, Sichuan (China)

    2011-10-15

    Highlights: > Specific points on the demand curve and flow patterns are visually studied. > Bubbly, churn, and annular flows were observed. > Onset of flow instability and bubbly-churn transition occurs at the same time. > The evolution of specific points and flow pattern transitions were examined. - Abstract: A simultaneous visualization and measurement study on some specific points on demand curves, such as onset of nucleate boiling (ONB), onset of significant void (OSV), onset of flow instability (OFI), and two-phase flow patterns in a single-side heated narrow rectangular channel, having a width of 40 mm and a gap of 3 mm, was carried out. New experimental approaches were adopted to identify OSV and OFI in a narrow rectangular channel. Under experimental conditions, the ONB could be predicted well by the Sato and Matsumura model. The OSV model of Bowring can reasonably predict the OSV if the single-side heated condition is considered. The OFI was close to the saturated boiling point and could be described accurately by Kennedy's correlation. The two-phase flow patterns observed in this experiment could be classified into bubbly, churn, and annular flow. Slug flow was never observed. The OFI always occurred when the bubbles at the channel exit began to coalesce, which corresponded to the beginning of the bubbly-churn transition in flow patterns. Finally, the evolution of specific points and flow pattern transitions were examined in a single-side heated narrow rectangular channel.

  17. Low-enthalpy geothermal resources for electricity production: A demand-side management study for intelligent communities

    DEFF Research Database (Denmark)

    Xydis, George A.; Nanaki, Evanthia A.; Koroneos, Christopher J.

    2013-01-01

    The geological conditions in Greece contributed to the creation of important low-enthalpy geothermal energy resources (LEGERs). The resources are divided into low, medium and high enthalpy, or temperature, based on criteria that are generally based on the energy content of the fluid. LEGERs are t...... and northern part of the country, as well as in many of the Aegean Islands. The aim of this work is to review the options for managing wind load by using low-enthalpy geothermal energy for electricity (through heat pump utilisation) according to the local energy demand....

  18. Ex-post evaluation of local energy efficiency and demand-side management operations - State of the art, bottom-up methods, applied examples and approach for the development of an evaluation practical culture; L'evaluation ex-post des operations locales de maitrise de la demande en energie - Etat de l'art, methodes bottom-up, exemples appliques et approche du developpement d'une culture pratique de l'evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Broc, J.S

    2006-12-15

    Energy end-use Efficiency (EE) is a priority for energy policies to face resources exhaustion and to reduce pollutant emissions. At the same time, in France, local level is increasingly involved into the implementation of EE activities, whose frame is changing (energy market liberalization, new policy instruments). Needs for ex-post evaluation of the local EE activities are thus increasing, for regulation requirements and to support a necessary change of scale. Our thesis focuses on the original issue of the ex-post evaluation of local EE operations in France. The state of the art, through the analysis of the American and European experiences and of the reference guidebooks, gives a substantial methodological material and emphasises the key evaluation issues. Concurrently, local EE operations in France are characterized by an analysis of their environment and a work on their segmentation criteria. The combination of these criteria with the key evaluation issues provides an analysis framework used as the basis for the composition of evaluation methods. This also highlights the specific evaluation needs for local operations. A methodology is then developed to complete and adapt the existing material to design evaluation methods for local operations, so that stakeholders can easily appropriate. Evaluation results thus feed a know-how building process with experience feedback. These methods are to meet two main goals: to determine the operation results, and to detect the success/failure factors. The methodology was validated on concrete cases, where these objectives were reached. (author)

  19. The long-term forecast of Taiwan's energy supply and demand: LEAP model application

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Yophy, E-mail: yohuanghaka@gmail.com [Deptartment of Public Finance and Tax Administration, National Taipei College of Business, Taipei Taiwan, 10051 (China); Bor, Yunchang Jeffrey [Deptartment of Economics, Chinese Culture University, Yang-Ming-Shan, Taipei, 11114, Taiwan (China); Peng, Chieh-Yu [Statistics Department, Taoyuan District Court, No. 1 Fazhi Road, Taoyuan City 33053, Taiwan (China)

    2011-11-15

    The long-term forecasting of energy supply and demand is an extremely important topic of fundamental research in Taiwan due to Taiwan's lack of natural resources, dependence on energy imports, and the nation's pursuit of sustainable development. In this article, we provide an overview of energy supply and demand in Taiwan, and a summary of the historical evolution and current status of its energy policies, as background to a description of the preparation and application of a Long-range Energy Alternatives Planning System (LEAP) model of Taiwan's energy sector. The Taiwan LEAP model is used to compare future energy demand and supply patterns, as well as greenhouse gas emissions, for several alternative scenarios of energy policy and energy sector evolution. Results of scenarios featuring 'business-as-usual' policies, aggressive energy-efficiency improvement policies, and on-schedule retirement of Taiwan's three existing nuclear plants are provided and compared, along with sensitivity cases exploring the impacts of lower economic growth assumptions. A concluding section provides an interpretation of the implications of model results for future energy and climate policies in Taiwan. - Research Highlights: > The LEAP model is useful for international energy policy comparison. > Nuclear power plants have significant, positive impacts on CO{sub 2} emission. > The most effective energy policy is to adopt demand-side management. > Reasonable energy pricing provides incentives for energy efficiency and conservation. > Financial crisis has less impact on energy demand than aggressive energy policy.

  20. Stochastic Security and Risk-Constrained Scheduling for an Autonomous Microgrid with Demand Response and Renewable Energy Resources

    DEFF Research Database (Denmark)

    Vahedipour-Dahraie, Mostafa; Rashidizadeh-Kermani, Homa; Najafi, Hamid Reza

    2017-01-01

    Increasing penetration of intermittent renewable energy sources (RESs) and the development of advanced information, give rise to questions on how responsive loads can be managed to optimize the use of resources and assets. In this context, demand response (DR) as a way for modifying the consumption...... procure energy from various sources including local generating units and demand-side resources to serve the customers. The operator sells electricity to customers under real-time pricing (RTP) scheme and the response of customers to electricity prices by adjusting their loads. The objective...

  1. A Multi-Scale Energy Demand Model suggests sharing Market Risks with Intelligent Energy Cooperatives

    NARCIS (Netherlands)

    Methenitis, G.; Kaisers, M.; La Poutré, J.A.

    2015-01-01

    In this paper, we propose a multi-scale model of energy demand that is consistent with observations at a macro scale, in our use-case standard load profiles for (residential) electric loads. We employ the model to study incentives to assume the risk of volatile market prices for intelligent energy c

  2. Pilot Evaluation of Energy Savings from Residential Energy Demand Feedback Devices

    Energy Technology Data Exchange (ETDEWEB)

    Parker, Danny S. [Florida Solar Energy Center, Cocoa, FL (United States); Hoak, David [Florida Solar Energy Center, Cocoa, FL (United States); Cummings, Jamie [Florida Solar Energy Center, Cocoa, FL (United States)

    2008-01-01

    This report discusses instantaneous feedback on household electrical demand has shown promise to reduce energy consumption. This report reviews past research and describes a two year pilot evaluation of a low cost residential energy feedback system installed in twenty case study homes in FL.

  3. Distributed Energy Systems Integration and Demand Optimization for Autonomous Operations and Electric Grid Transactions

    Energy Technology Data Exchange (ETDEWEB)

    Ghatikar, Girish [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Greenlots, San Francisco, CA (United States); Mashayekh, Salman [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Stadler, Michael [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Center for Energy and Innovation Technologies (Austria); Yin, Rongxin [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Liu, Zhenhua [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2015-11-29

    Distributed power systems in the U.S. and globally are evolving to provide reliable and clean energy to consumers. In California, existing regulations require significant increases in renewable generation, as well as identification of customer-side distributed energy resources (DER) controls, communication technologies, and standards for interconnection with the electric grid systems. As DER deployment expands, customer-side DER control and optimization will be critical for system flexibility and demand response (DR) participation, which improves the economic viability of DER systems. Current DER systems integration and communication challenges include leveraging the existing DER and DR technology and systems infrastructure, and enabling optimized cost, energy and carbon choices for customers to deploy interoperable grid transactions and renewable energy systems at scale. Our paper presents a cost-effective solution to these challenges by exploring communication technologies and information models for DER system integration and interoperability. This system uses open standards and optimization models for resource planning based on dynamic-pricing notifications and autonomous operations within various domains of the smart grid energy system. It identifies architectures and customer engagement strategies in dynamic DR pricing transactions to generate feedback information models for load flexibility, load profiles, and participation schedules. The models are tested at a real site in California—Fort Hunter Liggett (FHL). Furthermore, our results for FHL show that the model fits within the existing and new DR business models and networked systems for transactive energy concepts. Integrated energy systems, communication networks, and modeling tools that coordinate supply-side networks and DER will enable electric grid system operators to use DER for grid transactions in an integrated system.

  4. Energy Saving by Chopping off Peak Demand Using Day Light

    Directory of Open Access Journals (Sweden)

    Ashok Kumar Maitra

    2011-08-01

    Full Text Available An artificial intelligent technique has been implemented in this research using real time datas to calculate how much energy can be chopped from peak load demand. The results are based on real time data that are taken from power delivering centers. These datas do reflect the present condition of power and a solution to those critical conditions during the peak period. These are done in such a way such that helps in judicious scheduling of load. The time based load scheduling has been done so as to understand the basic criteria for solving power crisis during morning peak and early evening peak. The sunray availability and percentage of load that will use day light saving (DLS technique has been taken into account in this work. The results shows that about 0.5% to 1% of load can be shedded off from the peak load period which otherwise is reduction of power. Thus it otherwise also means that an equivalent amount of energy is saved which amounts to a large saving of national money. This result is obtained on monthly and even daily basis. Thus this paper justifies DLS gives a new renewable technique to save energy.

  5. Optimal Energy Management of Combined Cooling, Heat and Power in Different Demand Type Buildings Considering Seasonal Demand Variations

    Directory of Open Access Journals (Sweden)

    Akhtar Hussain

    2017-06-01

    Full Text Available In this paper, an optimal energy management strategy for a cooperative multi-microgrid system with combined cooling, heat and power (CCHP is proposed and has been verified for a test case of building microgrids (BMGs. Three different demand types of buildings are considered and the BMGs are assumed to be equipped with their own combined heat and power (CHP generators. In addition, the BMGs are also connected to an external energy network (EEN, which contains a large CHP, an adsorption chiller (ADC, a thermal storage tank, and an electric heat pump (EHP. By trading the excess electricity and heat energy with the utility grid and EEN, each BMG can fulfill its energy demands. Seasonal energy demand variations have been evaluated by selecting a representative day for the two extreme seasons (summer and winter of the year, among the real profiles of year-round data on electricity, heating, and cooling usage of all the three selected buildings. Especially, the thermal energy management aspect is emphasized where, bi-lateral heat trading between the energy supplier and the consumers, so-called energy prosumer concept, has been realized. An optimization model based on mixed integer linear programming has been developed for minimizing the daily operation cost of the EEN while fulfilling the energy demands of the BMGs. Simulation results have demonstrated the effectiveness of the proposed strategy.

  6. Simulated thermal energy demand and actual energy consumption in refurbished and non-refurbished buildings

    Science.gov (United States)

    Ilie, C. A.; Visa, I.; Duta, A.

    2016-08-01

    The EU legal frame imposes the Nearly Zero Energy Buildings (nZEB) status to any new public building starting with January 1st, 2019 and for any other new building starting with 2021. Basically, nZEB represents a Low Energy Building (LEB) that covers more than half of the energy demand by using renewable energy systems installed on or close to it. Thus, two steps have to be followed in developing nZEB: (1) reaching the LEB status through state- of-the art architectural and construction solutions (for the new buildings) or through refurbishing for the already existent buildings, followed by (2) implementing renewables; in Romania, over 65% of the energy demand in a building is directly linked to heating, domestic hot water (DHW), and - in certain areas - for cooling. Thus, effort should be directed to reduce the thermal energy demand to be further covered by using clean and affordable systems: solar- thermal systems, heat pumps, biomass, etc. or their hybrid combinations. Obviously this demand is influenced by the onsite climatic profile and by the building performance. An almost worst case scenario is approached in the paper, considering a community implemented in a mountain area, with cold and long winters and mild summers (Odorheiul Secuiesc city, Harghita county, Romania). Three representative types of buildings are analysed: multi-family households (in blocks of flats), single-family houses and administrative buildings. For the first two types, old and refurbished buildings were comparatively discussed.

  7. DSM的政府行动%Gove ental Behavior in Demand Side Management

    Institute of Scientific and Technical Information of China (English)

    杨志荣; 胡兆光; 周伏秋; 李为正

    2002-01-01

    With the accelerating market-oriented reform process in China, vertically integrated, government centeredenergy conservation administration system and operation mechanism as well as management approach based upon energyconsumption control have all lost ground of existence, and could not work effectively as before. From the perspective of thegovernment, it is necessary to transfer functions, adopt market-oriented operation nechanism and incentive policies, therebyfostering a ever-growing, sustainable energy efficiency market. DSM is a proved energy efficiency management technique andoperation mechanism adequate to narket economy, and a franework of laws, regulations and policies should be created tofacilitate its application.

  8. Security Issues of Solar Energy Harvesting Road Side Unit (RSU

    Directory of Open Access Journals (Sweden)

    Qutaiba I. Ali

    2015-06-01

    Full Text Available Vehicular network security had spanned and covered a wide range of security related issues. Howeversolar energy harvesting Road Side Unit (RSU security was not defined clearly, it is this aspect that is considered in this paper. In this work, we will suggest an RSU security model to protect it against different internal and external threats. The main goal is to protect RSU specific data (needed for its operation as well as its functionality and accessibility. The suggested RSU security model must responds to many objectives, it should ensure that the administrative information exchanged is correct and undiscoverable (information authenticity and privacy, the source (e.g., VANET server is who he claims to be (message integrity and source authentication and the system is robust and available (using Intrusion Detection System (IDS. In this paper, we suggest many techniques to strength RSU security and they were prototyped using an experimental model based on Ubicom IP2022 network processor development kit .

  9. Algorithms for balancing demand-side load and micro-generation in Islanded Operation

    NARCIS (Netherlands)

    Molderink, Albert; Bakker, Vincent; Hurink, Johann L.; Smit, Gerard J.M.

    2008-01-01

    Micro-generators are devices installed in houses pro- ducing electricity at kilowatt level. These appliances can increase energy efficiency significantly, especially when their runtime is optimized. During power outages micro- generators can supply critical systems and decrease dis- comfort. In th

  10. Power System Transient Stability Improvement Using Demand Side Management in Competitive Electricity Markets

    DEFF Research Database (Denmark)

    Hu, Weihao; Wang, Chunqi; Chen, Zhe

    2012-01-01

    Since the hourly spot market price is available one day ahead in Denmark, the price could be transferred to the consumers and they may shift some of their loads from high price periods to the low price periods in order to save their energy costs. The optimal load response to an electricity price ...

  11. Smart grid dispatch strategy for on/off demand-side devices

    DEFF Research Database (Denmark)

    Biegel, Benjamin; Andersen, Palle; Pedersen, Tom S.

    2013-01-01

    and downward regulation. Two control strategies are presented enabling the portfolio to provide regulating power while respecting the runtime, downtime, and energy constraints of the devices. The first strategy is a predictive controller requiring complete device information; this controller is able to utilize...

  12. DEVELOPMENT OF THE E-GOVERNMENT MARKET IN THE EUROPEAN UNION: AN ANALYSIS OF THE SUPPLY VERSUS DEMAND SIDES

    Directory of Open Access Journals (Sweden)

    Veghes Calin

    2011-07-01

    Full Text Available E-government represents one of the most palpable results of the dynamic development of the information and communication technology. Defined mostly as an intensive use of information technologies to provide public services, e-government has been approached in the literature rather from a technological perspective, with a significant importance given to the supply and a lower attention paid to the demand side. The increasing interest in taking into consideration the demand side in the development of the e-government initiatives and projects has created the foundation for a shift in the way the conceptual framework for e-government planning and implementation is defined, from the technology infrastructure and costs to the customer-centric character of all the efforts done. The European Union put e-government on its agenda aiming to improve access to the public information and services, increase transparency of public administration, exploit effectively the information technology within public administration, and establishing e-procurement. The development of the e-government services in the Member States, as it is expressed by the data regarding the supply and demand side, has been conducted in a more or less different manner that led, at the Unions level, to a relatively high availability but a rather low usage of the specific services. The paper explores the relationship between the e-government supply and demand based on the secondary data referring to the public services available to the citizens (as these are defined by the Eurostat methodology and the usage of these services by the individuals, integrating them through an analytical matrix inspired by the BCG model. Probably the most important conclusion of this analysis states that development of the e-government services has not been accompanied by measures meant to stimulate their usage in the most of the European Union Member States. The analytical matrix allowed also the identification

  13. Planning nuclear energy centers under technological and demand uncertainty

    Energy Technology Data Exchange (ETDEWEB)

    Meier, P.M.; Palmedo, P.F.

    1976-01-01

    The question considered is whether new nuclear power plants should be located in nuclear energy centers, or ''power parks'' with co-located fabrication and reprocessing facilities. That issue has been addressed in a recent study by the Nuclear Regulatory Commission and remains under investigation at Brookhaven and elsewhere. So far, however, the advisability of this policy has been analyzed primarily within the framework of a single view of the future. Suggestions of the types of questions that should be asked regarding this policy if it is properly to be viewed as an example of decision making under uncertainty are made. It is concluded that ''A consideration of the various uncertainties involved in the question of dispersed vs. remote siting of energy facilities introduces a number of new elements into the analysis. On balance those considerations provide somewhat greater support for the clustered concept. The NEC approach seems to provide somewhat greater flexibility in accomodating possible future electricity generating technologies. Increased regulatory and construction efficiencies possible in an NEC reduces the impact of demand uncertainty as does the lower costs associated with construction acceleration or deceleration.'' It is also noted that, in the final analysis, ''it is the public's perception of the relative costs and benefits of a measure that determine the acceptability or unacceptability of a particular innovation,'' not the engineer's cost/benefit analysis. It is further noted that if the analysis can identify limits on analytical methods and models, it will not make the job of energy decision-making any easier, but it may make the process more responsive to its impact on society. (MCW)

  14. Understanding international postgraduate studies. Drivers from the supply and the demand side.

    Science.gov (United States)

    Delgado-Serrano, M M; Gomez-Bruque, J L; Ambrosio-Albala, M J; Llamas-Moreno, B

    2010-01-01

    Changes in the global political and socioeconomic scenario are fostering the internationalization of master and doctoral programme as one of the current priorities for Universities. Changes in European higher education such as those stimulated by the Bologna process and the introduction of double, multiple or joint Master degree programmes together with the Erasmus Mundus programme are enhancing the competition of European universities in the global education market place. Universities compete to attract the best students, both national and international, to their postgraduate programmes. However, the design and launch of international masters or doctorates imply working with a different logic to the one used in national programmes. Complexity, diversity and differentiation are drivers of international education and as happens in complex systems the properties and features of the final products are different from the existing in the individual components. The aim of this paper is to understand international studies as complex systems and to analyze and identify factors affecting to the different components involved in the implementation of these programmes. The new approaches and the interrelations in aspects such as academic, administrative or economic management, quality assurance and marketing issues are examined and drivers, challenges and good practices where possible are identified. The analysis has been carried out considering the point of view of both Universities (supply-led approach) and students and employers (demand-led approach). From the analysis have emerged important questions that show the interrelation pattern and that can be useful when designing and implementing international postgraduate studies. Universities and students tend to agree about many issues however, some divergences have also been identified which make the results of the research more valuable.

  15. The demand-side innovation policies in the context of small EU member country. Nõudluspoolsed innovatsioonipoliitikad Euroopa Liidu väikese liikmesriigi kontekstis

    Directory of Open Access Journals (Sweden)

    Tõnu Roolaht

    2013-01-01

    Full Text Available Demand-side innovation policies, in the form of regulations, public procurement, subsidies for private demand, and other measures, are often viewed as valuable additions to more traditional supply-side policies. The demand-side innovation policies should enable to facilitate the emergence of vital and sustainable links between innovation outputs and various markets. However, without sufficient institutional framework and policy experiences such measures could also contribute to new market distortions or crowding-out effects, which do not facilitate sustainable growth in innovations. The charting of possible risks of such policies should help to outline the criteria for aiming at sustainable effects. The purpose of this contribution is to offer suggestions about preconditions and policy characteristics, which should help to avoid the misuse of demand-side measures and facilitate the sustainability of desired changes in society. It is predominantly conceptual contribution but draws also extensively on case evidence about the effects of relevant policies and their discontinuation

  16. Review of Strategies and Technologies for Demand-Side Management on Isolated Mini-Grids

    Energy Technology Data Exchange (ETDEWEB)

    Harper, Meg [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2013-03-01

    This review provides an overview of strategies and currently available technologies used for demandside management (DSM) on mini-grids throughout the world. For the purposes of this review, mini-grids are defined as village-scale electricity distribution systems powered by small local generation sources and not connected to a main grid.1 Mini-grids range in size from less than 1 kW to several hundred kW of installed generation capacity and may utilize different generation technologies, such as micro-hydro, biomass gasification, solar, wind, diesel generators, or a hybrid combination of any of these. This review will primarily refer to AC mini-grids, though much of the discussion could apply to DC grids as well. Many mini-grids include energy storage, though some rely solely on real-time generation.

  17. Supply- and Demand-Side Factors Influencing Utilization of Infant and Young Child Feeding Counselling Services in Viet Nam.

    Directory of Open Access Journals (Sweden)

    Phuong H Nguyen

    Full Text Available Adequate utilization of services is critical to maximize the impact of counselling on infant and young child feeding (IYCF, but little is known about factors affecting utilization. Our study examined supply- and demand-side factors associated with the utilization of IYCF counselling services in Viet Nam. We used survey data from mothers with children <2y (n = 1,008 and health staff (n = 60 from the evaluation of a program that embedded IYCF counseling into the existing government health system. The frequency of never users, one-time users, repeat users, and achievers of the recommended minimum number of visits at health facilities were 45.1%, 13.0%, 28.4% and 13.5%, respectively. Poisson regression showed that demand-generation strategies, especially invitation cards, were the key factors determining one-time use (Prevalence ratio, PR 3.0, 95% CI: 2.2-4.2, repeated use (PR 3.2, 95% CI: 2.4-4.2, and achievement of minimum visits (PR 5.5, 95% CI: 3.6-8.4. Higher maternal education was associated with higher utilization both for one-time and repeated use. Being a farmer, belonging to an ethnic minority, and having a wasted child were associated with greater likelihood of achieving the minimum recommended number of visits, whereas child stunting or illness were not. Distance to health center was a barrier to repeated visits. Among supply-side factors, good counselling skills (PR: 1.3-1.8 was the most important factor associated with any service use, whereas longer employment duration and greater work pressure of health center staff were associated with lower utilization. Population attributable risk estimations showed that an additional 25% of the population would have achieved the minimum number of visits if exposed to three demand-generation strategies, and further increased to 49% if the health staff had good counseling skills and low work pressure. Our study provides evidence that demand-generation strategies are essential to increase

  18. Improving the Model for Energy Consumption Load Demand Forecasting

    Science.gov (United States)

    Bunnoon, Pituk; Chalermyanont, Kusumal; Limsakul, Chusak

    This paper proposes an application of a filter method in preprocessing stage for mid-term load demand forecasting to improve electricity load forecasting and to guarantee satisfactory forecasting accuracy. Case study employs the historical electricity consumption demand data in Thailand which were recorded in the 12 years of 1997 through to 2007. The load demand forecasted value is used for unit commitment and fuel reserve planning in the power system. This method consists of a trend component and a cyclical component decomposed from the original load demand using the Hodrick-Prescott (HP) filter in the preprocessing stage and the forecasting of each component using Double Neural Networks (DNNs) in the forecasting stage. Experimental results show that with preprocessing before forecasting can predict the load demand better than that without preprocessing.

  19. Public sector innovation and the demand-side innovation policies. Summary: Avaliku sektori innovatsioonid ja nõudluspoolsed innovatsioonipoliitikad

    Directory of Open Access Journals (Sweden)

    Tõnu Roolaht

    2013-09-01

    Full Text Available The public sector innovations are important additions to private and social efforts towards development oriented changes in society. These innovations aim at improving the efficiency and societal value of public services. In order to do so, the new organisational arrangements as well as public-private partnerships are often called for. In these situations, the novel service configurations are designed by public policy makers, but the actual service provision might be delegated to private companies or to non-governmental organisations (NGOs. This kind of combined execution creates strong connection between public sector innovations and demandside innovation policies. The purpose of this study is to offer the possible ways to combine public sector innovations with demand-side innovation policies in Estonia. This would allow building strong ties between innovative advances in private and public sectors, thus enhancing the change towards knowledge-based society.

  20. Potential of Demand Side Management to Reduce Carbon Dioxide Emissions Associated with the Operation of Heat Pumps

    Directory of Open Access Journals (Sweden)

    Samuel J. G. Cooper

    2013-06-01

    Full Text Available This work considers the potential reduction in the carbon dioxide emissions associated with the operation of Air Source Heat Pump which could be achieved by using demand side management. In order to achieve significant reductions in carbon dioxide emissions, it is widely envisioned that electrification of the heating sector will need to be combined with decarbonisation of the electrical supply. By influencing the times at when electric heat pumps operate such that they coincide more with electricity generation which has a low marginal carbon emissions factor, it has been suggested that these emissions could be reduced further. In order to investigate this possibility, models of the UK electrical grid based on scenarios for 2020 to 2050 have been combined with a dynamic model of an air source heat pump unit and thermal models of a population of dwellings. The performance and carbon dioxide emissions associated with the heat pumps are compared both with and without demand side management interventions intended to give preference to operation when the marginal emissions factor of the electricity being generated is low. It is found that these interventions are unlikely to be effective at achieving further reductions in emissions. A reduction of around 3% was observed in scenarios based around 2035 but in other scenarios the reduction was insignificant. In the scenarios with high wind generation (2050, the DSM scheme considered here tends to improve thermal comfort (with minimal increases in emissions rather than achieving a decrease in emissions. The reasons for this are discussed and further recommendations are made.

  1. Simulation modeling for analysis of effectiveness and prime movers electrical energy demand of liquid coupled energy recovery systems

    Energy Technology Data Exchange (ETDEWEB)

    Ardehali, M.M. [Power and Energy Management Division, Department of Electrical Engineering, Amirkabir University of Technology (Tehran Polytechnic), Hafez Ave, Tehran (Iran); Torfi, S. [Energy Systems Engineering Division, Department of Mechanical Engineering, KN Toosi University of Technology (Iran)

    2006-09-15

    Realization of anticipated energy efficiency from recuperative liquid coupled run-around energy recovery (LER) systems requires identification of the system components influential parameters and accounting for the prime movers energy requirements. Because simulation modeling is considered as an integral part of the design and economic evaluation of LER systems, it is essential to calibrate the developed models and validate the performance predictions by means of comparison with data from experimental measurements. The objective of this study is to develop a simulation model for a typical LER system that accounts for (a) energy loss from the interconnecting piping, (b) temperature dependency of thermophysical properties, (c) hydraulic pressure drop as a function of liquid Reynolds number and other related physical parameters, such as bends and bypass flow, (d) heat exchangers air side convective transfer coefficients based on recent correlations reported for wavy fins and (e) varying efficiency for prime movers. To achieve the objective, several simplifying assumptions used in previous studies have been relaxed; the interactions between all system components are mathematically modeled; and the latest correlations are utilized. The results from the simulation modeling of this study are found to be within 4% of the experimental data reported in the literature. Because of the dynamics introduced by the operation of the three way valve, controlling the pump and fan motors based on the bypass ratio is recommended, as it would result in better management of the electrical energy demand. (author)

  2. Documentation of an interactive program for projecting space heating energy demand (IPPSHED)

    Energy Technology Data Exchange (ETDEWEB)

    Schneider, Doreen

    1978-08-01

    The model presented here is designed to be a tool for analyzing the effects of conservation strategies in reducing building energy demands. The purpose of the model is to project residential space heating demands for defined structural types. The user obtains energy demand projections, interactively, for different geographic regions. These energy demands are derived by incorporating theoretical building energy loads, projected housing and fuel mixes, and the efficiencies of both the structures and the conversion devices. The User's Guide in Appendix A contains the necessary information for running the model. This section will be published as a separate report.

  3. Promotion COPERNIC Energy and Society the interrogations on the world demand evolution; Promotion COPERNIC Energie et Societe les interrogations sur l'evolution de la demande mondiale

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-12-15

    In the framework of a prospective reflexion emergence on the energy demand, this document presents an analysis of the prospective approach and of recent studies: challenges, interests, limits, validity of the models and hypothesis and results relevance. With this analysis, the authors aim to identify the main interrogations bond to the world energy demand evolution. They then analyse these interrogations in the framework of a sectoral approach (agriculture, industry, transports, residential) in order to detail the demand and to forecast the evolution. Facing the consumption attitudes, they also suggest some new action avenues to favor a sustainable growth. (A.L.B.)

  4. 75 FR 54063 - Demand Response Compensation in Organized Wholesale Energy Markets; Technical Conference

    Science.gov (United States)

    2010-09-03

    ...-000] Demand Response Compensation in Organized Wholesale Energy Markets; Technical Conference AGENCY... address the use of a net benefits test for determining when to compensate demand response providers and the allocation of costs associated with demand response. DATES: The technical conference will be...

  5. Analysis of Energy Demand for Low-Energy Multi-Dwelling Buildings of Different Configuration

    Directory of Open Access Journals (Sweden)

    Giedrė Streckienė

    2014-10-01

    Full Text Available To meet the goals established by Directive 2010/31/EU of the European Parliament and of the Council on the energy performance of buildings, the topics of energy efficiency in new and old buildings must be solved. Research and development of new energy solutions and technology are necessary for increasing energy performance of buildings. Three low-energy multi-dwelling buildings have been modelled and analyzed in the presented study. All multi-dwelling houses are made of similar single-family house cells. However, multi-dwelling buildings are of different geometry, flat number and height. DesignBuilder software was used for simulating and determining heating, cooling and electricity demand for buildings. Three different materials (silicate, ceramic and clay concrete blocks as bearing constructions of external walls have been analyzed. To decrease cooling demand for buildings, the possibility of mounting internal or external louvers has been considered. Primary energy savings for multi-dwelling buildings using passive solar measures have been determined.

  6. Energy demand for elimination of organic micropollutants in municipal wastewater treatment plants.

    Science.gov (United States)

    Mousel, Danièle; Palmowski, Laurence; Pinnekamp, Johannes

    2017-01-01

    Organic micropollutants (OMP), e.g. pharmaceuticals and household/industrial chemicals, are not fully eliminated in state-of-the-art municipal wastewater treatment plants and can potentially harm the aquatic environment. Therefore, several pilot and large-scale investigations on the elimination of organic micropollutants have taken place in recent years. Based on the present findings, the most efficient treatment steps to eliminate organic micropollutants have proven to be ozonation, adsorption on powdered activated carbon (PAC), or filtration through granular activated carbon (GAC). Yet a further treatment step implies an increase in energy demand of the wastewater treatment plant, which has to be considered along with OMP elimination. To this aim, data on energy demand of ten large-scale municipal wastewater treatment plants (WWTP) with processes for OMP elimination was collected and analyzed. Moreover, calculations on energy demand beyond the WWTP for production and transport of ancillary materials were performed to assess the cumulative energy demand of the processes. An assessment of the greenhouse gas emissions of the processes was achieved, which shall facilitate future life cycle analyses. The results show that energy demand of ozonation at the wastewater treatment plant is dependent upon the ozone dosage and is significantly higher than energy demand of PAC addition or GAC filtration (2 to 4 times higher without consideration of delivery heads). Despite uncertainties regarding the energy demand for production of activated carbon, it could be shown that the cumulative energy demand of adsorption steps is significantly higher than the energy demand at the WWTP. Using reactivated GAC can lead to energy and greenhouse gas emissions savings compared to using fresh GAC/PAC. Moreover, energy demand is always plant-specific and depends on different factors (delivery heads, existing filtration or post-treatment etc.). Since processes for elimination of organic

  7. Coupling Motion and Energy Harvesting of Two Side-by-Side Flexible Plates in a 3D Uniform Flow

    Directory of Open Access Journals (Sweden)

    Dibo Dong

    2016-05-01

    Full Text Available The fluid-structure interaction problems of two side-by-side flexible plates with a finite aspect ratio in a three-dimensional (3D uniform flow are numerically studied. The plates’ motions are entirely passive under the force of surrounding fluid. By changing the aspect ratio and transverse distance, the coupling motions, drag force and energy capture performance are analyzed. The mechanisms underlying the plates’ motion and flow characteristics are discussed systematically. The adopted algorithm is verified and validated by the simulation of flow past a square flexible plate. The results show that the plate’s passive flapping behavior contains transverse and spanwise deformation, and the flapping amplitude is proportional to the aspect ratio. In the side-by-side configuration, three distinct coupling modes of the plates’ motion are identified, including single-plate mode, symmetrical flapping mode and decoupled mode. The plate with a lower aspect ratio may suffer less drag force and capture less bending energy than in the isolated situation. The optimized selection for obtaining higher energy conversion efficiency is the plate flapping in single-plate mode, especially the plate with a higher aspect ratio. The findings of this work provide several new physical insights into the understanding of fish schooling and are expected to inspire the developments of underwater robots or energy harvesters.

  8. Scaling and localizing of demand side integration potentials in urban space using GIS based city maps; Bestimmung und Verortung von Demand Side Integration Potenzialen im urbanen Raum mit Hilfe digitaler Stadtgrundkarten

    Energy Technology Data Exchange (ETDEWEB)

    Schaefers, Hans [Hochschule fuer angewandte Wissenschaften, Hamburg (Germany). Center for Demand Side Integration (C4DSI); Kulus, Daniel [Hafencity Univ. Hamburg (Germany). Computer-based Methods in Urban and Regional Planning

    2012-07-01

    An Assessment of the Demand Side Integration Potential from HVAC for whole cities can be achieved through a detailed analysis of the building stock. Using GIS based digital city maps in combination with usage based characteristic data on the typical power installed in buildings for HVAC (such as the VDI 3807-4) an automated approach can be defined to achieve building specific data covering a whole city. This paper discusses a feasibility study for such an approach that was carried out by the university of applied sciences and the harbour city university both of Hamburg. Out of a total of about 340.000 buildings in Hamburg the study defined 832 buildings of office like use with a noteworthy DSI potential from HVAC. The same method could be used to automatically analyse the DSI potential of other sectors of building use for a whole city and/or be transferred to other cities with similar data basis. Because of the inherent connection to a GIS based data set the results can be easily displayed in maps. The paper gives an introduction into the method, shows some results achieved and discusses the approach and its transferability. (orig.)

  9. Effects of atmospheric variability on energy utilization and conservation. [Space heating energy demand modeling; Program HEATLOAD

    Energy Technology Data Exchange (ETDEWEB)

    Reiter, E.R.; Johnson, G.R.; Somervell, W.L. Jr.; Sparling, E.W.; Dreiseitly, E.; Macdonald, B.C.; McGuirk, J.P.; Starr, A.M.

    1976-11-01

    Research conducted between 1 July 1975 and 31 October 1976 is reported. A ''physical-adaptive'' model of the space-conditioning demand for energy and its response to changes in weather regimes was developed. This model includes parameters pertaining to engineering factors of building construction, to weather-related factors, and to socio-economic factors. Preliminary testing of several components of the model on the city of Greeley, Colorado, yielded most encouraging results. Other components, especially those pertaining to socio-economic factors, are still under development. Expansion of model applications to different types of structures and larger regions is presently underway. A CRT-display model for energy demand within the conterminous United States also has passed preliminary tests. A major effort was expended to obtain disaggregated data on energy use from utility companies throughout the United States. The study of atmospheric variability revealed that the 22- to 26-day vacillation in the potential and kinetic energy modes of the Northern Hemisphere is related to the behavior of the planetary long-waves, and that the midwinter dip in zonal available potential energy is reflected in the development of blocking highs. Attempts to classify weather patterns over the eastern and central United States have proceeded satisfactorily to the point where testing of our method for longer time periods appears desirable.

  10. Empirical assessment of the determinants of road energy demand in Greece

    Energy Technology Data Exchange (ETDEWEB)

    Polemis, Michael L. [Athens Univ., Dept. of Economics, Athens (Greece)

    2006-05-15

    This paper attempts to cast light on the determinants of road energy demand in Greece. For this purpose, we used cointegration techniques and vector autoregression (VAR) analysis in order to capture short-run and long-run dynamics for gasoline and diesel demand, respectively. From the empirical analysis that covers the period 1978-2003, we find that in the long-run gasoline energy demand appears to be price and income inelastic while diesel demand appears to be price inelastic and income elastic. We also found that the absence of close substitutes in the road sector denotes the low level of energy switching in Greece. (Author)

  11. Consumer-led demand side financing in health and education and its relevance for low and middle income countries.

    Science.gov (United States)

    Ensor, Tim

    2004-01-01

    There is increasing awareness that supply subsidies for health and education services often fail to benefit those that are most vulnerable in a community. This recognition has led to a growing interest in and experimentation with, consumer-led demand side financing systems (CL-DSF). These mechanisms place purchasing power in the hands of consumers to spend on specific services at accredited facilities. International evidence in education and health sectors suggest a limited success of CL-DSF in raising the consumption of key services amongst priority groups. There is also some evidence that vouchers can be used to improve targeting of vulnerable groups. There is very little positive evidence on the effect of CL-DSF on service quality as a consequence of greater competition. Location of services relative to population means that areas with more provider choice, particularly in the private sector, tend to be dominated by higher and middle-income households. Extending CL-DSF in low-income countries requires the development of capacity in administering these financing schemes and also accrediting providers. Schemes could focus primarily on fixed packages of key services aimed at easily identifiable groups. Piloting and robust evaluation is required to fill the evidence gap on the impact of these mechanisms. Extending demand financing to less predictable services, such as hospital coverage for the population, is likely to require the development of a voucher scheme to purchase insurance. This suggests an already developed insurance market and is unlikely to be appropriate in most low-income countries for some time.

  12. Electric energy demand and supply prospects for California

    Science.gov (United States)

    Jones, H. G. M.

    1978-01-01

    A recent history of electricity forecasting in California is given. Dealing with forecasts and regulatory uncertainty is discussed. Graphs are presented for: (1) Los Angeles Department of Water and Power and Pacific Gas and Electric present and projected reserve margins; (2) California electricity peak demand forecast; and (3) California electricity production.

  13. Energy Consumption and Freight Transport Demand in Denmark

    DEFF Research Database (Denmark)

    Salling, Kim Bang; Bonilla, David

    2008-01-01

    econometric models make use of a deterministic trend to explain fuel intensity and cannot accommodate long-run effects such as asymmetric diesel price effects and relationship between the variables in the freight demand. Our results do not confirm that decoupling truck freight has accelerated in recent years...

  14. Web-based energy information systems for energy management and demand response in commercial buildings

    Energy Technology Data Exchange (ETDEWEB)

    Motegi, Naoya; Piette, Mary Ann; Kinney, Satkartar; Herter, Karen

    2003-04-18

    Energy Information Systems (EIS) for buildings are becoming widespread in the U.S., with more companies offering EIS products every year. As a result, customers are often overwhelmed by the quickly expanding portfolio of EIS feature and application options, which have not been clearly identified for consumers. The object of this report is to provide a technical overview of currently available EIS products. In particular, this report focuses on web-based EIS products for large commercial buildings, which allow data access and control capabilities over the Internet. EIS products combine software, data acquisition hardware, and communication systems to collect, analyze and display building information to aid commercial building energy managers, facility managers, financial managers and electric utilities in reducing energy use and costs in buildings. Data types commonly processed by EIS include energy consumption data; building characteristics; building system data, such as heating, ventilation, and air-conditioning (HVAC) and lighting data; weather data; energy price signals; and energy demand-response event information. This project involved an extensive review of research and trade literature to understand the motivation for EIS technology development. This study also gathered information on currently commercialized EIS. This review is not an exhaustive analysis of all EIS products; rather, it is a technical framework and review of current products on the market. This report summarizes key features available in today's EIS, along with a categorization framework to understand the relationship between EIS, Energy Management and Control Systems (EMCSs), and similar technologies. Four EIS types are described: Basic Energy Information Systems (Basic-EIS); Demand Response Systems (DRS); Enterprise Energy Management (EEM); and Web-based Energy Management and Control Systems (Web-EMCS). Within the context of these four categories, the following characteristics of EIS

  15. Demand for Energy and Energy Generation: Does Regional Energy Policy Play a Role?

    OpenAIRE

    Ojeaga, Paul; Odejimi DEBORAH

    2014-01-01

    Does regional energy policy play a role in regional energy generation? What does the implication of the current industrialization trend mean for the generation and the supply process across regions? And to what extent does regional energy policy affect energy security (energy supply risks) in regions? This study investigates the effect of regional energy policy on regional generation characteristics in seven regions of the World using regional panel data from 1980 to 2010 a period of 31 years...

  16. Dynamic temperature dependence patterns in future energy demand models in the context of climate change

    NARCIS (Netherlands)

    Hekkenberg, M.; Moll, H.C.; Schoot Uiterkamp, A.J.M.

    2009-01-01

    Energy demand depends on outdoor temperature in a 'u' shaped fashion. Various studies have used this temperature dependence to investigate the effects of climate change on energy demand. Such studies contain implicit or explicit assumptions to describe expected socio-economic changes that may affect

  17. Enhancing State Clean Energy Workforce Training to Meet Demand. Issue Brief

    Science.gov (United States)

    Saha, Devashree

    2010-01-01

    Recent state policy and federal funding initiatives are driving the demand for clean energy in both the short and long term. This increased demand has created the need for many more workers trained or retrained in a variety of clean energy jobs. In response, states are utilizing funding under the American Recovery and Reinvestment Act of 2009…

  18. The management from the viewpoint of the demand and the institutional and regulatory details at energy industry; O gerenciamento do lado da demanda e as nuances institucionais e regulatorias na industria energetica

    Energy Technology Data Exchange (ETDEWEB)

    Udaeta, Miguel Edgar Morales; Galvao, Luiz Claudio Ribeiro; Bermann, Celio [Universidade de Sao Paulo (USP), SP (Brazil). Inst. de Eletrotecnica e Energia; Baitelo, Ricardo Lacerda [Universidade de Sao Paulo (GEPEA-USP), SP (Brazil). Escola Politecnica. Dept. de Energia e Automacao Eletricas. Grupo de Energia

    2006-07-01

    Demand Side Management can be described as any activity focused on demand control or energy efficiency improvement, seeking to alter the quantity and the period of energy use. This paper aims at discussing the main points concerning impacts and barriers in the implementation of DSM policies. This identification intends to discuss these issues and suggest possible alternatives towards the implementation of DSM programs. (author)

  19. Climate change, renewable energy and population impact on future energy demand for Burkina Faso build environment

    Science.gov (United States)

    Ouedraogo, B. I.

    This research addresses the dual challenge faced by Burkina Faso engineers to design sustainable low-energy cost public buildings and domestic dwellings while still providing the required thermal comfort under warmer temperature conditions caused by climate change. It was found base don climate change SRES scenario A2 that predicted mean temperature in Burkina Faso will increase by 2oC between 2010 and 2050. Therefore, in order to maintain a thermally comfortable 25oC inside public buildings, the projected annual energy consumption for cooling load will increase by 15%, 36% and 100% respectively for the period between 2020 to 2039, 2040 to 2059 and 2070 to 2089 when compared to the control case. It has also been found that a 1% increase in population growth will result in a 1.38% and 2.03% increase in carbon emission from primary energy consumption and future electricity consumption respectively. Furthermore, this research has investigated possible solutions for adaptation to the severe climate change and population growth impact on energy demand in Burkina Faso. Shading devices could potentially reduce the cooling load by up to 40%. Computer simulation programming of building energy consumption and a field study has shown that adobe houses have the potential of significantly reducing energy demand for cooling and offer a formidable method for climate change adaptation. Based on the Net Present Cost, hybrid photovoltaic (PV) and Diesel generator energy production configuration is the most cost effective local electricity supply system, for areas without electricity at present, with a payback time of 8 years when compared to diesel generator stand-alone configuration. It is therefore a viable solution to increase electricity access to the majority of the population.

  20. A New Method to Plan the Capacity and Location of Battery Swapping Station for Electric Vehicle Considering Demand Side Management

    Directory of Open Access Journals (Sweden)

    Wenxia Liu

    2016-06-01

    Full Text Available Compared to electric vehicle (EV charging mode, battery swapping mode can realize concentrated and orderly charging. Therefore battery swapping stations (BSS can participate in the demand side management (DSM as an integrated form. In this context, a new method to plan the capacity and location of BSS for EV, considering DSM, is proposed in this paper. Firstly, based on the original charging power of BSS with the rule of “First-In First-Out”, a bi-level optimal configuration model of BSS, in which net profit of BSS is maximized in the upper model and operating cost of Distribution Company is minimized in the lower model, is developed to decide the rated power, number of batteries, contract pricing and dispatched power of BSS for DSM. Then, the optimal locating model of BSS with the objective of minimizing network loss is built. A mesh adaptive direct search algorithm with YALMIP toolbox is applied to optimize the bi-level model. Simulation calculation was carried on IEEE-33 nodes distribution system and the results show that participating in DSM can improve the economic benefits of both BSS and distribution network and promote the consumption of distributed generation, verifying the feasibility and effectiveness of the proposed method.

  1. How might residential PV change the energy demand curve in Poland

    Directory of Open Access Journals (Sweden)

    Jurasz Jakub

    2016-01-01

    Full Text Available Photovoltaics (PV in terms of installed capacity play a minor role in the portfolio of renewable energy sources (RES in Poland. However current market tendencies indicate that residential PV installations are gaining on popularity and may in future significantly contribute to covering national energy demand. This study investigates the potential impact of numerous residential PV installations on the shape and statistical properties of the polish energy demand curve. Analysis employed statistical data on mean household energy consumption in different districts, typical energy demand patterns and hourly values of irradiation for the year 2012. Obtained results indicate that there is a possibility to integrate in total as much as 300 000 residential PV installations (0.9 GW from which generated energy will be utilized by households within given district. Further analysis has shown that to some extent increasing number of residential PV decreases the value of energy demand coefficient of variation.

  2. The Outlook for Energy Supply and Demand (1/3)

    CERN Document Server

    CERN. Geneva

    2015-01-01

    These lectures will review the challenges facing energy policy, the outlook for different sources of primary energy (fossil and renewable), how energy is used, and prospects for improved energy efficiency. A colloquium ‘Can Future Energy Needs be Met Sustainably?’, that I will be giving on Tuesday 15 September at 16:30, is part of this course – see separate Abstract for a summary. The lectures will provide more details and address topics that will only be mentioned in passing in the colloquium.

  3. Structural change of the economy, technological progress and long-term energy demand

    DEFF Research Database (Denmark)

    Klinge Jacobsen, Henrik

    ) the effect on energy demand of structural changes exemplified by changes in the energy supply sector and in Danish trade patterns. The report highlights a few aspects of the interaction between structural economic changes and energy demand, but it does not intend to cover a wide range of issues related...... to these topics. In the introductory chapter some discussions and thoughts about issues not covered by the articles are brought forward. The introductory chapter includes an overview of possible relations between longterm energy demand and the economy, technical progress, demography, social conditions...

  4. Forecasting energy demand and CO{sub 2}-emissions from energy production in the forest industry

    Energy Technology Data Exchange (ETDEWEB)

    Malinen, H.

    1997-12-31

    The purpose of this study was to develops new energy forecasting methods for the forest industry energy use. The scenarios have been the most commonly used forecasts, but they require a lot of work. The recent scenarios, which are made for the forest industry, give a wide range of results; e.g. from 27,8 TWh to 38 TWh for electricity use in 2010. There is a need for more simple and accurate methods for forecasting. The time scale for the study is from 1975 to 2010, i.e. 36 years. The basic data for the study is collected from time period 1975 - 1995. It includes the wood use, production of main product categories and energy use in the forest industry. The factors affecting energy use at both industry level and at mill level are presented. The most probable technology trends, which can have an effect on energy production and use and CO{sub 2}-emissions are studied. Recent forecasts for the forest industry energy use till the year 2010 are referred and analysed. Three alternative forecasting methods are studied more closely. These methods are (a) Regression analysis, (b) Growth curves and (c) Delphi-method. Total electricity demand, share of purchased electricity, total fuel demand and share of process-based biofuels are estimated for the time period 1996 - 2010. The results from the different methods are compared to each other and to the recent scenarios. The comparison is made for the results concerning the energy use and the usefulness of the methods in practical work. The average energy consumption given by the forecasts for electricity was 31,6 TWh and for fuel 6,2 Mtoe in 2010. The share of purchased electricity totalled 73 % and process based fuels 77 %. The figures from 1995 are 22,8 TWh, 5,5 Mtoe, 64 % and 68 % respectively. All three methods were suitable for forecasting. All the methods required less working hours and were easier to use than scenarios. The methods gave results with a smaller deviation than scenarios, e.g. with electricity use in 2010 from

  5. Evaluating the sustainability of an energy supply system using renewable energy sources: An energy demand assessment of South Carolina

    Science.gov (United States)

    Green, Cedric Fitzgerald

    Sustainable energy is defined as a dynamic harmony between the equitable availability of energy-intensive goods and services to all people and the preservation of the earth for future generations. Sustainable energy development continues to be a major focus within the government and regulatory governing bodies in the electric utility industry. This is as a result of continued demand for electricity and the impact of greenhouse gas emissions from electricity generating plants on the environment by way of the greenhouse effect. A culmination of increasing concerns about climate change, the nuclear incident in Fukushima four years ago, and discussions on energy security in a world with growing energy demand have led to a movement for increasing the share of power generation from renewable energy sources. This work studies demand for electricity from primarily residential, commercial, agricultural, and industrial customers in South Carolina (SC) and its effect on the environment from coal-fired electricity generating plants. Moreover, this work studies sustainable renewable energy source-options based on the renewable resources available in the state of SC, as viable options to supplement generation from coal-fired electricity generating plants. In addition, greenhouse gas emissions and other pollutants from primarily coal-fired plants will be defined and quantified. Fundamental renewable energy source options will be defined and quantified based on availability and sustainability of SC's natural resources. This work studies the environmental, economic, and technical aspects of each renewable energy source as a sustainable energy option to replace power generation from coal-fired plants. Additionally, social aspect implications will be incorporated into each of the three aspects listed above, as these aspects are explored during the research and analysis. Electricity demand data and alternative energy source-supply data in SC are carried out and are used to develop and

  6. The energy required to produce materials: constraints on energy-intensity improvements, parameters of demand.

    Science.gov (United States)

    Gutowski, Timothy G; Sahni, Sahil; Allwood, Julian M; Ashby, Michael F; Worrell, Ernst

    2013-03-13

    In this paper, we review the energy requirements to make materials on a global scale by focusing on the five construction materials that dominate energy used in material production: steel, cement, paper, plastics and aluminium. We then estimate the possibility of reducing absolute material production energy by half, while doubling production from the present to 2050. The goal therefore is a 75 per cent reduction in energy intensity. Four technology-based strategies are investigated, regardless of cost: (i) widespread application of best available technology (BAT), (ii) BAT to cutting-edge technologies, (iii) aggressive recycling and finally, and (iv) significant improvements in recycling technologies. Taken together, these aggressive strategies could produce impressive gains, of the order of a 50-56 per cent reduction in energy intensity, but this is still short of our goal of a 75 per cent reduction. Ultimately, we face fundamental thermodynamic as well as practical constraints on our ability to improve the energy intensity of material production. A strategy to reduce demand by providing material services with less material (called 'material efficiency') is outlined as an approach to solving this dilemma.

  7. Energy Consumption and Freight Transport Demand in Denmark

    DEFF Research Database (Denmark)

    Salling, Kim Bang; Bonilla, David

    2008-01-01

    Considering the externalities of freight transport activity (energy use, accidents, congestion, its related GHG emissions, and lost oil revenues) this article reviews trends from 1990-2005 in truck freight fuel intensity (energy use per tonne-km moved), on road truck fuel economy (L/ 100 km driven......). We review changes in decoupling truck freight activity from GDP. We examine separately five manufacturing sectors using data from Statistics Denmark on vehicle performance for 1980-2006. Our four major findings are: (1) truck freight energy intensity (mj/tonne-km) continues to grow as well as CO2...... emissions; (2) decoupling has not been large enough to reduce overall energy use of truck; (3) because of the absence of fuel economy regulations, a low average vehicle load, increased hauling distance, overall energy use of truck freight will continue to expand; (4) results show that standard freight...

  8. Vouchers as demand side financing instruments for health care: a review of the Bangladesh maternal voucher scheme.

    Science.gov (United States)

    Schmidt, Jean-Olivier; Ensor, Tim; Hossain, Atia; Khan, Salam

    2010-07-01

    Demand side financing (DSF) mechanisms transfer purchasing power to specified groups for defined goods and services in order to increase access to specified services. This is an important innovation in health care systems where access remains poor despite substantial subsidies towards the supply side. In Bangladesh, a maternal health DSF pilot in 33 sub-districts was launched in 2007. We report the results of a rapid review of this scheme undertaken during 2008 after 1 year of its setup. Quantitative data collected by DSF committees, facilities and national information systems were assessed alongside qualitative data, i.e. key informant interviews and focus group discussions with beneficiaries and health service providers on the operation of the scheme in 6 sub-districts. The scheme provides vouchers to women distributed by health workers that entitle mainly poor women to receive skilled care at home or a facility and also provide payments for transport and food. After initial setbacks voucher distribution rose quickly. The data also suggest that the rise in facility based delivery appeared to be more rapid in DSF than in other non-DSF areas, although the methods do not allow for a strict causal attribution as there might be co-founding effects. Fears that the financial incentives for surgical delivery would lead to an over emphasis on Caesarean section appear to be unfounded although the trends need further monitoring. DSF provides substantial additional funding to facilities but remains complex to administer, requiring a parallel administrative mechanism putting additional work burden on the health workers. There is little evidence that the mechanism encourages competition due to the limited provision of health care services. The main question outstanding is whether the achievements of the DSF scheme could be achieved more efficiently by adapting the regular government funding rather than creating an entirely new mechanism. Also, improving the quality of health

  9. India Energy Outlook: End Use Demand in India to 2020

    Energy Technology Data Exchange (ETDEWEB)

    de la Rue du Can, Stephane; McNeil, Michael; Sathaye, Jayant

    2009-03-30

    Integrated economic models have been used to project both baseline and mitigation greenhouse gas emissions scenarios at the country and the global level. Results of these scenarios are typically presented at the sectoral level such as industry, transport, and buildings without further disaggregation. Recently, a keen interest has emerged on constructing bottom up scenarios where technical energy saving potentials can be displayed in detail (IEA, 2006b; IPCC, 2007; McKinsey, 2007). Analysts interested in particular technologies and policies, require detailed information to understand specific mitigation options in relation to business-as-usual trends. However, the limit of information available for developing countries often poses a problem. In this report, we have focus on analyzing energy use in India in greater detail. Results shown for the residential and transport sectors are taken from a previous report (de la Rue du Can, 2008). A complete picture of energy use with disaggregated levels is drawn to understand how energy is used in India and to offer the possibility to put in perspective the different sources of end use energy consumption. For each sector, drivers of energy and technology are indentified. Trends are then analyzed and used to project future growth. Results of this report provide valuable inputs to the elaboration of realistic energy efficiency scenarios.

  10. Future energy demand in Laos. Scenario alternatives for development

    Energy Technology Data Exchange (ETDEWEB)

    Luukkanen, J.; Kouphokham, K.; Panula-Ontto, J. [and others

    2012-07-01

    Energy production in Laos is still dominated by traditional fuels. Fuelwood in the main source of energy and most of the energy is consumed at households for cooking. Increase in the number of cars and motorbikes is rapidly increasing the use of imported petroleum products. Electrification is one of the central targets of the Lao government. The electrification rate has increased fast in Laos and in the year 2010 over 70 % households had electricity supply. The target is to have 90 % access to electricity by the year 2020. The World Bank regards the electrification of Lao PDR to be a success story. This paper deals with the present and future energy consumption in Laos. First the historical trends of energy use in different sectors are analysed. The future scenarios are constructed using LaoLinda model. Four different future alternative development paths are analysed using the model results. The energy use data source for the analysis is from the Ministry of Energy and Mines (MEM) of Lao PDR. Economic and other data is from the Department of Statistics of Lao PDR.

  11. Opportunities for Energy Efficiency and Automated Demand Response in Industrial Refrigerated Warehouses in California

    Energy Technology Data Exchange (ETDEWEB)

    Lekov, Alex; Thompson, Lisa; McKane, Aimee; Rockoff, Alexandra; Piette, Mary Ann

    2009-05-11

    This report summarizes the Lawrence Berkeley National Laboratory's research to date in characterizing energy efficiency and open automated demand response opportunities for industrial refrigerated warehouses in California. The report describes refrigerated warehouses characteristics, energy use and demand, and control systems. It also discusses energy efficiency and open automated demand response opportunities and provides analysis results from three demand response studies. In addition, several energy efficiency, load management, and demand response case studies are provided for refrigerated warehouses. This study shows that refrigerated warehouses can be excellent candidates for open automated demand response and that facilities which have implemented energy efficiency measures and have centralized control systems are well-suited to shift or shed electrical loads in response to financial incentives, utility bill savings, and/or opportunities to enhance reliability of service. Control technologies installed for energy efficiency and load management purposes can often be adapted for open automated demand response (OpenADR) at little additional cost. These improved controls may prepare facilities to be more receptive to OpenADR due to both increased confidence in the opportunities for controlling energy cost/use and access to the real-time data.

  12. An overview of energy supply and demand in China

    Energy Technology Data Exchange (ETDEWEB)

    Liu, F.; Davis, W.B.; Levine, M.D.

    1992-05-01

    Although China is a poor country, with much of its population still farming for basic subsistence in rural villages, China is rich in energy resources. With the world's largest hydropower potential, and ranking third behind the US and USSR in coal reserves, China is in a better position than many other developing countries when planning for its future energy development and self-sufficiency. China is now the third largest producer and consumer of commercial energy, but its huge populace dilutes this impressive aggregate performance into a per capita figure which is an order of magnitude below the rich industrialized nations. Despite this fact, it is still important to recognize that China's energy system is still one of the largest in the world. A system this size allows risk taking and can capture economies of scale. The Chinese have maintained rapid growth in energy production for several decades. In order to continue and fully utilize its abundant resources however, China must successfully confront development challenges in many areas. For example, the geographic distribution of consumption centers poorly matches the distribution of resources, which makes transportation a vital but often weak link in the energy system. Another example -- capital -- is scarce relative to labor, causing obsolete and inefficiently installed technology to be operated well beyond what would be considered its useful life in the West. Major improvements in industrial processes, buildings, and other energy-using equipment and practices are necessary if China's energy efficiency is to continue to improve. Chinese energy planners have been reluctant to invest in environmental quality at the expense of more tangible production quotas.

  13. An overview of energy supply and demand in China

    Energy Technology Data Exchange (ETDEWEB)

    Liu, F.; Davis, W.B.; Levine, M.D.

    1992-05-01

    Although China is a poor country, with much of its population still farming for basic subsistence in rural villages, China is rich in energy resources. With the world`s largest hydropower potential, and ranking third behind the US and USSR in coal reserves, China is in a better position than many other developing countries when planning for its future energy development and self-sufficiency. China is now the third largest producer and consumer of commercial energy, but its huge populace dilutes this impressive aggregate performance into a per capita figure which is an order of magnitude below the rich industrialized nations. Despite this fact, it is still important to recognize that China`s energy system is still one of the largest in the world. A system this size allows risk taking and can capture economies of scale. The Chinese have maintained rapid growth in energy production for several decades. In order to continue and fully utilize its abundant resources however, China must successfully confront development challenges in many areas. For example, the geographic distribution of consumption centers poorly matches the distribution of resources, which makes transportation a vital but often weak link in the energy system. Another example -- capital -- is scarce relative to labor, causing obsolete and inefficiently installed technology to be operated well beyond what would be considered its useful life in the West. Major improvements in industrial processes, buildings, and other energy-using equipment and practices are necessary if China`s energy efficiency is to continue to improve. Chinese energy planners have been reluctant to invest in environmental quality at the expense of more tangible production quotas.

  14. An overview of energy supply and demand in China

    Energy Technology Data Exchange (ETDEWEB)

    Liu, F.; Davis, W.B.; Levine, M.D.

    1992-05-01

    Although China is a poor country, with much of its population still farming for basic subsistence in rural villages, China is rich in energy resources. With the world's largest hydropower potential, and ranking third behind the US and USSR in coal reserves, China is in a better position than many other developing countries when planning for its future energy development and self-sufficiency. China is now the third largest producer and consumer of commercial energy, but its huge populace dilutes this impressive aggregate performance into a per capita figure which is an order of magnitude below the rich industrialized nations. Despite this fact, it is still important to recognize that China's energy system is still one of the largest in the world. A system this size allows risk taking and can capture economies of scale. The Chinese have maintained rapid growth in energy production for several decades. In order to continue and fully utilize its abundant resources however, China must successfully confront development challenges in many areas. For example, the geographic distribution of consumption centers poorly matches the distribution of resources, which makes transportation a vital but often weak link in the energy system. Another example -- capital -- is scarce relative to labor, causing obsolete and inefficiently installed technology to be operated well beyond what would be considered its useful life in the West. Major improvements in industrial processes, buildings, and other energy-using equipment and practices are necessary if China's energy efficiency is to continue to improve. Chinese energy planners have been reluctant to invest in environmental quality at the expense of more tangible production quotas.

  15. An overview of energy supply and demand in China

    Energy Technology Data Exchange (ETDEWEB)

    Liu, F.; Davis, W.B.; Levine, M.D.

    1992-05-01

    Although China is a poor country, with much of its population still farming for basic subsistence in rural villages, China is rich in energy resources. With the world`s largest hydropower potential, and ranking third behind the US and USSR in coal reserves, China is in a better position than many other developing countries when planning for its future energy development and self-sufficiency. China is now the third largest producer and consumer of commercial energy, but its huge populace dilutes this impressive aggregate performance into a per capita figure which is an order of magnitude below the rich industrialized nations. Despite this fact, it is still important to recognize that China`s energy system is still one of the largest in the world. A system this size allows risk taking and can capture economies of scale. The Chinese have maintained rapid growth in energy production for several decades. In order to continue and fully utilize its abundant resources however, China must successfully confront development challenges in many areas. For example, the geographic distribution of consumption centers poorly matches the distribution of resources, which makes transportation a vital but often weak link in the energy system. Another example -- capital -- is scarce relative to labor, causing obsolete and inefficiently installed technology to be operated well beyond what would be considered its useful life in the West. Major improvements in industrial processes, buildings, and other energy-using equipment and practices are necessary if China`s energy efficiency is to continue to improve. Chinese energy planners have been reluctant to invest in environmental quality at the expense of more tangible production quotas.

  16. Reflections about the Brazilian energy policy from a project of DSM (Demand Side Management) in low-income social strata in the Manaus city, AM, Brazil; Reflexoes sobre a politica energetica brasileira a partir de um projeto de GLD (Gerenciamento pelo Lado da Demanda) em extrato social de baixa renda na cidade de Manaus, AM

    Energy Technology Data Exchange (ETDEWEB)

    Valois, Ilsa; Cartaxo, Elizabeth [Universidade Federal do Amazonas (UFAM), Manaus, AM (Brazil). Fac. de Tecnologia. Nucleo Interdisciplinar de Energia, Meio Ambiente e Agua

    2008-07-01

    Considering the peculiarities of the different Brazilian regions, this article reports a survey developed in the city of Manaus - AM and makes a political analysis about the electric energy and environmental impacts arising. The main objective is to discuss the importance of rational energy consumption in a region where they add, the problems on the depletion of energy resources, the climatic difficulties, geographical and economic interests inherent in the capitalist system. Within this reality this article discuss aspects of a study by the Amazon Federal University, in the context of a project on energy efficiency. The project swapped 66 inefficient air conditioners for equipment with the stamp PROCEL energy efficiency in seven public schools in the Manaus city. Alongside the exchange program, an educational program selected 111 students whose homes were also monitored through the history of consumption during the life of the project. The result s of monitoring was demonstrated an economy of substantial energy (31%) whereas, in homes, there was no exchange of air conditioners. Should be the positive results only to a new position with respect to the final use of electric energy. It was found that the user's public school belongs to the group of low -income consumers and small the opportunity to reduce their consumption. Consequently, the results point to the inefficient application of resources that limit the possibilities for projects with greater economic and social return. (author)

  17. Performance outcomes and unwanted side effects associated with energy drinks.

    Science.gov (United States)

    Mora-Rodriguez, Ricardo; Pallarés, Jesús G

    2014-10-01

    Energy drinks are increasingly popular among athletes and others. Advertising for these products typically features images conjuring great muscle power and endurance; however, the scientific literature provides sparse evidence for an ergogenic role of energy drinks. Although the composition of energy drinks varies, most contain caffeine; carbohydrates, amino acids, herbs, and vitamins are other typical ingredients. This report analyzes the effects of energy drink ingredients on prolonged submaximal (endurance) exercise as well as on short-term strength and power (neuromuscular performance). It also analyzes the effects of energy drink ingredients on the fluid and electrolyte deficit during prolonged exercise. In several studies, energy drinks have been found to improve endurance performance, although the effects could be attributable to the caffeine and/or carbohydrate content. In contrast, fewer studies find an ergogenic effect of energy drinks on muscle strength and power. The existing data suggest that the caffeine dose given in studies of energy drinks is insufficient to enhance neuromuscular performance. Finally, it is unclear if energy drinks are the optimal vehicle to deliver caffeine when high doses are needed to improve neuromuscular performance.

  18. An evaluation of two large scale demand side financing programs for maternal health in India: the MATIND study protocol.

    Science.gov (United States)

    Sidney, Kristi; de Costa, Ayesha; Diwan, Vishal; Mavalankar, Dileep V; Smith, Helen

    2012-08-27

    High maternal mortality in India is a serious public health challenge. Demand side financing interventions have emerged as a strategy to promote access to emergency obstetric care. Two such state run programs, Janani Suraksha Yojana (JSY)and Chiranjeevi Yojana (CY), were designed and implemented to reduce financial access barriers that preclude women from obtaining emergency obstetric care. JSY, a conditional cash transfer, awards money directly to a woman who delivers in a public health facility. This will be studied in Madhya Pradesh province. CY, a voucher based program, empanels private obstetricians in Gujarat province, who are reimbursed by the government to perform deliveries of socioeconomically disadvantaged women. The programs have been in operation for the last seven years. The study outlined in this protocol will assess and compare the influence of the two programs on various aspects of maternal health care including trends in program uptake, institutional delivery rates, maternal and neonatal outcomes, quality of care, experiences of service providers and users, and cost effectiveness. The study will collect primary data using a combination of qualitative and quantitative methods, including facility level questionnaires, observations, a population based survey, in-depth interviews, and focus group discussions. Primary data will be collected in three districts of each province. The research will take place at three levels: the state health departments, obstetric facilities in the districts and among recently delivered mothers in the community. The protocol is a comprehensive assessment of the performance and impact of the programs and an economic analysis. It will fill existing evidence gaps in the scientific literature including access and quality to services, utilization, coverage and impact. The implementation of the protocol will also generate evidence to facilitate decision making among policy makers and program managers who currently work with or

  19. An evaluation of two large scale demand side financing programs for maternal health in India: the MATIND study protocol

    Directory of Open Access Journals (Sweden)

    Sidney Kristi

    2012-08-01

    Full Text Available Abstract Background High maternal mortality in India is a serious public health challenge. Demand side financing interventions have emerged as a strategy to promote access to emergency obstetric care. Two such state run programs, Janani Suraksha Yojana (JSYand Chiranjeevi Yojana (CY, were designed and implemented to reduce financial access barriers that preclude women from obtaining emergency obstetric care. JSY, a conditional cash transfer, awards money directly to a woman who delivers in a public health facility. This will be studied in Madhya Pradesh province. CY, a voucher based program, empanels private obstetricians in Gujarat province, who are reimbursed by the government to perform deliveries of socioeconomically disadvantaged women. The programs have been in operation for the last seven years. Methods/designs The study outlined in this protocol will assess and compare the influence of the two programs on various aspects of maternal health care including trends in program uptake, institutional delivery rates, maternal and neonatal outcomes, quality of care, experiences of service providers and users, and cost effectiveness. The study will collect primary data using a combination of qualitative and quantitative methods, including facility level questionnaires, observations, a population based survey, in-depth interviews, and focus group discussions. Primary data will be collected in three districts of each province. The research will take place at three levels: the state health departments, obstetric facilities in the districts and among recently delivered mothers in the community. Discussion The protocol is a comprehensive assessment of the performance and impact of the programs and an economic analysis. It will fill existing evidence gaps in the scientific literature including access and quality to services, utilization, coverage and impact. The implementation of the protocol will also generate evidence to facilitate decision making

  20. Energy efficient demand controlled ventilation in single family houses

    DEFF Research Database (Denmark)

    Nielsen, Toke Rammer; Drivsholm, Christian

    2010-01-01

    This paper presents a strategy for a simple demand controlled ventilation system for single family houses where all sensors and controls are located in the air handling unit. The strategy is based on sensing CO2-concentration and moisture content in the outdoor air and exhaust air. The CO2......-concentration is used to ensure adequate ventilation during occupancy and the moisture content is used to ensure adequate removal of moisture produced in the house. The ventilation rate can be switched between two flow rates: a high rate and a low rate. The high flow rate is based on existing requirements...... in the Danish building regulations and the low flow rate is based on minimum requirements in indoor air quality standards. Measurements were performed on an existing single family house where the controls were installed on the existing mechanical ventilation system. The results showed that the ventilation can...

  1. For a simultaneous mastery of the energy demand and offer; Pour une maitrise simultanee de la demande et de l'offre d'energie

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-05-01

    This document is a 'white book' written by the French energy-environment technical association (ATEE) in the framework of the national debate on energies. Its aim is to provide arguments, ways of reflexion and proposals of measures and actions in the domain of competence of the ATEE, i.e. energy mastery, renewable energies and cogeneration in the industry sector, the public and private tertiary sector, the collective dwelling and the local organizations. The recommendations of ATEE are based on a balance and sustainable mastery of both the energy demand and the energy offer: 1 - reduction of the demand and improvement of the energy efficiency (reduction of the French energy intensity, consumer information about energy saving and abatement of CO{sub 2} emissions, abatement of energy consumptions in government buildings, allocation of sufficient budgetary means to the French agency of environment and energy mastery (Ademe), implementation of energy mastery programs by energy suppliers, generalization of 'result contracts' by energy service companies and progressive integration of CO{sub 2} emissions, appointment of energy responsible persons in administrations and energy consuming companies, creation of a domestic emission credit market for non-eligible companies, integration of the indirect emissions due to the transports, implementation of the technology procurement purchase method to improve the energy efficiency of common appliances). 2 - mastery of the offer: encouraging cogeneration, revalorization of the repurchase tariffs of the electricity produced from renewable energies, flattening of the administrative, regulatory and contractual obstacles, promotion of the use of renewable heat. The contributions of the 'cogeneration', 'biogas' and 'wood-fuel' associations are given in appendixes. (J.S.)

  2. Control and Optimization Meet the Smart Power Grid - Scheduling of Power Demands for Optimal Energy Management

    CERN Document Server

    Koutsopoulos, Iordanis

    2010-01-01

    The smart power grid aims at harnessing information and communication technologies to enhance reliability and enforce sensible use of energy. Its realization is geared by the fundamental goal of effective management of demand load. In this work, we envision a scenario with real-time communication between the operator and consumers. The grid operator controller receives requests for power demands from consumers, with different power requirement, duration, and a deadline by which it is to be completed. The objective is to devise a power demand task scheduling policy that minimizes the grid operational cost over a time horizon. The operational cost is a convex function of instantaneous power consumption and reflects the fact that each additional unit of power needed to serve demands is more expensive as demand load increases.First, we study the off-line demand scheduling problem, where parameters are fixed and known. Next, we devise a stochastic model for the case when demands are generated continually and sched...

  3. The Integration of Energy Efficiency, Renewable Energy, DemandResponse and Climate Change: Challenges and Opportunities for Evaluatorsand Planners

    Energy Technology Data Exchange (ETDEWEB)

    Vine, Edward

    2007-05-29

    This paper explores the feasibility of integrating energyefficiency program evaluation with the emerging need for the evaluationof programs from different "energy cultures" (demand response, renewableenergy, and climate change). The paper reviews key features andinformation needs of the energy cultures and critically reviews theopportunities and challenges associated with integrating these withenergy efficiency program evaluation. There is a need to integrate thedifferent policy arenas where energy efficiency, demand response, andclimate change programs are developed, and there are positive signs thatthis integration is starting to occur.

  4. Energy Systems Scenario Modelling and Long Term Forecasting of Hourly Electricity Demand

    DEFF Research Database (Denmark)

    Alberg Østergaard, Poul; Møller Andersen, Frits; Kwon, Pil Seok

    2015-01-01

    . The results show that even with a limited short term electric car fleet, these will have a significant effect on the energy system; the energy system’s ability to integrate wind power and the demand for condensing power generation capacity in the system. Charging patterns and flexibility have significant...... or inflexible electric vehicles and individual heat pumps, and in the long term it is investigated what the effects of changes in the load profiles due to changing weights of demand sectors are. The analyses are based on energy systems simulations using EnergyPLAN and demand forecasting using the Helena model...... effects on this. Likewise, individual heat pumps may affect the system operation if they are equipped with heat storages. The analyses also show that the long term changes in electricity demand curve profiles have little impact on the energy system performance. The flexibility given by heat pumps...

  5. Air conditioning versus heating: climate control is more energy demanding in Minneapolis than in Miami

    Science.gov (United States)

    Sivak, Michael

    2013-03-01

    Energy demand for climate control was analyzed for Miami (the warmest large metropolitan area in the US) and Minneapolis (the coldest large metropolitan area). The following relevant parameters were included in the analysis: (1) climatological deviations from the desired indoor temperature as expressed in heating and cooling degree days, (2) efficiencies of heating and cooling appliances, and (3) efficiencies of power-generating plants. The results indicate that climate control in Minneapolis is about 3.5 times as energy demanding as in Miami. This finding suggests that, in the US, living in cold climates is more energy demanding than living in hot climates.

  6. DEMONSTRATION OF THE ENVIRONMENTAL AND DEMAND-SIDE MANAGEMENT BENEFITS OF GRID-CONNECTED PHOTOVOLTAIC POWER SYSTEMS SITED ON MILITARY BASES

    Science.gov (United States)

    The report gives results of an investigation into the pollutant emission reduction and demand-side management potential of three photovoltaic (PV) systems installed at Ft. Huachuca, AZ, Ft. Dix, NJ, and Hickam Air Force Base, HI, which began operation between January and July 199...

  7. Optimization Based Data Mining Approah for Forecasting Real-Time Energy Demand

    Energy Technology Data Exchange (ETDEWEB)

    Omitaomu, Olufemi A [ORNL; Li, Xueping [University of Tennessee, Knoxville (UTK); Zhou, Shengchao [University of Tennessee, Knoxville (UTK)

    2015-01-01

    The worldwide concern over environmental degradation, increasing pressure on electric utility companies to meet peak energy demand, and the requirement to avoid purchasing power from the real-time energy market are motivating the utility companies to explore new approaches for forecasting energy demand. Until now, most approaches for forecasting energy demand rely on monthly electrical consumption data. The emergence of smart meters data is changing the data space for electric utility companies, and creating opportunities for utility companies to collect and analyze energy consumption data at a much finer temporal resolution of at least 15-minutes interval. While the data granularity provided by smart meters is important, there are still other challenges in forecasting energy demand; these challenges include lack of information about appliances usage and occupants behavior. Consequently, in this paper, we develop an optimization based data mining approach for forecasting real-time energy demand using smart meters data. The objective of our approach is to develop a robust estimation of energy demand without access to these other building and behavior data. Specifically, the forecasting problem is formulated as a quadratic programming problem and solved using the so-called support vector machine (SVM) technique in an online setting. The parameters of the SVM technique are optimized using simulated annealing approach. The proposed approach is applied to hourly smart meters data for several residential customers over several days.

  8. Transportation Energy Futures Series: Freight Transportation Demand: Energy-Efficient Scenarios for a Low-Carbon Future

    Energy Technology Data Exchange (ETDEWEB)

    Grenzeback, L. R.; Brown, A.; Fischer, M. J.; Hutson, N.; Lamm, C. R.; Pei, Y. L.; Vimmerstedt, L.; Vyas, A. D.; Winebrake, J. J.

    2013-03-01

    Freight transportation demand is projected to grow to 27.5 billion tons in 2040, and to nearly 30.2 billion tons in 2050. This report describes the current and future demand for freight transportation in terms of tons and ton-miles of commodities moved by truck, rail, water, pipeline, and air freight carriers. It outlines the economic, logistics, transportation, and policy and regulatory factors that shape freight demand, the trends and 2050 outlook for these factors, and their anticipated effect on freight demand. After describing federal policy actions that could influence future freight demand, the report then summarizes the capabilities of available analytical models for forecasting freight demand. This is one in a series of reports produced as a result of the Transportation Energy Futures project, a Department of Energy-sponsored multi-agency effort to pinpoint underexplored strategies for reducing GHGs and petroleum dependence related to transportation.

  9. Transportation Energy Futures Series: Freight Transportation Demand: Energy-Efficient Scenarios for a Low-Carbon Future

    Energy Technology Data Exchange (ETDEWEB)

    Grenzeback, L. R. [Cambridge Systematics Inc., Cambridge, MA (United States); Brown, A. [Cambridge Systematics Inc., Cambridge, MA (United States); Fischer, M. J. [Cambridge Systematics Inc., Cambridge, MA (United States); Hutson, N. [Cambridge Systematics Inc., Cambridge, MA (United States); Lamm, C. R. [Cambridge Systematics Inc., Cambridge, MA (United States); Pei, Y. L. [Cambridge Systematics Inc., Cambridge, MA (United States); Vimmerstedt, L. [Cambridge Systematics Inc., Cambridge, MA (United States); Vyas, A. D. [Cambridge Systematics Inc., Cambridge, MA (United States); Winebrake, J. J. [Cambridge Systematics Inc., Cambridge, MA (United States)

    2013-03-01

    Freight transportation demand is projected to grow to 27.5 billion tons in 2040, and by extrapolation, to nearly 30.2 billion tons in 2050, requiring ever-greater amounts of energy. This report describes the current and future demand for freight transportation in terms of tons and ton-miles of commodities moved by truck, rail, water, pipeline, and air freight carriers. It outlines the economic, logistics, transportation, and policy and regulatory factors that shape freight demand; the possible trends and 2050 outlook for these factors, and their anticipated effect on freight demand and related energy use. After describing federal policy actions that could influence freight demand, the report then summarizes the available analytical models for forecasting freight demand, and identifies possible areas for future action.

  10. An accelerator-driven reactor for meeting future energy demand

    Energy Technology Data Exchange (ETDEWEB)

    Takahashi, Hiroshi; Yang, Y.; Yu, A.

    1997-12-31

    Fissile fuel can be produced at a high rate using an accelerator-driven Pu-fueled subcritical fast reactor which avoids encountering a shortage of Pu during a high growth rate in the production of nuclear energy. Furthermore, the necessity of the early introduction of the fast reactor can be moderated. Subcritical operation provides flexible nuclear energy options along with high neutron economy for producing the fuel, for transmuting high-level waste such as minor actinides, and for efficiently converting excess and military Pu into proliferation-resistant fuel.

  11. Influence Of Building Zoning On Annual Energy Demand

    OpenAIRE

    Rivalin, Lisa; Marchio, Dominique; Stabat, Pascal; Caciolo, Marcello; Cogné, Benoit

    2014-01-01

    Simulation tools are widely used to assess the energy consumption of a building. In the modeling process, some choices should be made by the simulation tool user such as the division of the building into thermal zones. The zoning process is user dependent, which results in some difference in energy consumption results and model set-up and computational times. The aim of this work is to assess the influence of building zoning on the results of the dynamic thermal simulation including airflow a...

  12. The dark side of cosmology: dark matter and dark energy.

    Science.gov (United States)

    Spergel, David N

    2015-03-06

    A simple model with only six parameters (the age of the universe, the density of atoms, the density of matter, the amplitude of the initial fluctuations, the scale dependence of this amplitude, and the epoch of first star formation) fits all of our cosmological data . Although simple, this standard model is strange. The model implies that most of the matter in our Galaxy is in the form of "dark matter," a new type of particle not yet detected in the laboratory, and most of the energy in the universe is in the form of "dark energy," energy associated with empty space. Both dark matter and dark energy require extensions to our current understanding of particle physics or point toward a breakdown of general relativity on cosmological scales.

  13. New views on the low-energy side of gravity

    OpenAIRE

    Piazza, Federico

    2009-01-01

    Common wisdom associates all the unraveled and theoretically challenging aspects of gravity with its UV-completion. However, there appear to be few difficulties afflicting the effective framework for gravity already at low energy, that are likely to be detached from the high-energy structure. Those include the black hole information paradox, the cosmological constant problem and the rather involved and fine tuned model building required to explain our cosmological observations. I review some ...

  14. Watershed Scale Optimization to Meet Sustainable Cellulosic Energy Crop Demand

    Energy Technology Data Exchange (ETDEWEB)

    Chaubey, Indrajeet [Purdue Univ., West Lafayette, IN (United States); Cibin, Raj [Purdue Univ., West Lafayette, IN (United States); Bowling, Laura [Purdue Univ., West Lafayette, IN (United States); Brouder, Sylvie [Purdue Univ., West Lafayette, IN (United States); Cherkauer, Keith [Purdue Univ., West Lafayette, IN (United States); Engel, Bernard [Purdue Univ., West Lafayette, IN (United States); Frankenberger, Jane [Purdue Univ., West Lafayette, IN (United States); Goforth, Reuben [Purdue Univ., West Lafayette, IN (United States); Gramig, Benjamin [Purdue Univ., West Lafayette, IN (United States); Volenec, Jeffrey [Purdue Univ., West Lafayette, IN (United States)

    2017-03-24

    The overall goal of this project was to conduct a watershed-scale sustainability assessment of multiple species of energy crops and removal of crop residues within two watersheds (Wildcat Creek, and St. Joseph River) representative of conditions in the Upper Midwest. The sustainability assessment included bioenergy feedstock production impacts on environmental quality, economic costs of production, and ecosystem services.

  15. Energy management strategy for fuel cell-supercapacitor hybrid vehicles based on prediction of energy demand

    Science.gov (United States)

    Carignano, Mauro G.; Costa-Castelló, Ramon; Roda, Vicente; Nigro, Norberto M.; Junco, Sergio; Feroldi, Diego

    2017-08-01

    Offering high efficiency and producing zero emissions Fuel Cells (FCs) represent an excellent alternative to internal combustion engines for powering vehicles to alleviate the growing pollution in urban environments. Due to inherent limitations of FCs which lead to slow transient response, FC-based vehicles incorporate an energy storage system to cover the fast power variations. This paper considers a FC/supercapacitor platform that configures a hard constrained powertrain providing an adverse scenario for the energy management strategy (EMS) in terms of fuel economy and drivability. Focusing on palliating this problem, this paper presents a novel EMS based on the estimation of short-term future energy demand and aiming at maintaining the state of energy of the supercapacitor between two limits, which are computed online. Such limits are designed to prevent active constraint situations of both FC and supercapacitor, avoiding the use of friction brakes and situations of non-power compliance in a short future horizon. Simulation and experimentation in a case study corresponding to a hybrid electric bus show improvements on hydrogen consumption and power compliance compared to the widely reported Equivalent Consumption Minimization Strategy. Also, the comparison with the optimal strategy via Dynamic Programming shows a room for improvement to the real-time strategies.

  16. Maximum-likelihood, self-consistent side chain free energies with applications to protein molecular dynamics

    CERN Document Server

    Jumper, John M; Sosnick, Tobin R

    2016-01-01

    To address the large gap between time scales that can be easily reached by molecular simulations and those required to understand protein dynamics, we propose a new methodology that computes a self-consistent approximation of the side chain free energy at every integration step. In analogy with the adiabatic Born-Oppenheimer approximation in which the nuclear dynamics are governed by the energy of the instantaneously-equilibrated electronic degrees of freedom, the protein backbone dynamics are simulated as preceding according to the dictates of the free energy of an instantaneously-equilibrated side chain potential. The side chain free energy is computed on the fly; hence, the protein backbone dynamics traverse a greatly smoothed energetic landscape, resulting in extremely rapid equilibration and sampling of the Boltzmann distribution. Because our method employs a reduced model involving single-bead side chains, we also provide a novel, maximum-likelihood type method to parameterize the side chain model using...

  17. Towards managing consumer energy demand with the aid of the internet of things

    CSIR Research Space (South Africa)

    Smith, Andrew C

    2012-05-01

    Full Text Available and designed to be incorporated into the Internet of Things. We describe the technology used and dedicate a section on the potential benefits of making consumer energy demand information available at regional and national levels....

  18. The impact of indoor thermal conditions, system controls and building types on the building energy demand

    Energy Technology Data Exchange (ETDEWEB)

    Corgnati, Stefano Paolo; Fabrizio, Enrico; Filippi, Marco [Dipartimento di Energetica (DENER), Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Torino (Italy)

    2008-07-01

    It is possible to evaluate the energy demand as well as the parameters related to indoor thermal comfort through building energy simulation tools. Since energy demand for heating and cooling is directly affected by the required level of thermal comfort, the investigation of the mutual relationship between thermal comfort and energy demand (and therefore operating costs) is of the foremost importance both to define the benchmarks for energy service contracts and to calibrate the energy labelling according to European Directive 2002/92/CE. The connection between indoor thermal comfort conditions and energy demand for both heating and cooling has been analyzed in this work with reference to a set of validation tests (office buildings) derived from a European draft standard. Once a range of required acceptable indoor operative temperatures had been fixed in accordance with Fanger's theory (e.g. -0.5 < PMV < -0.5), the effective hourly comfort conditions and the energy consumptions were estimated through dynamic simulations. The same approach was then used to quantify the energy demand when the range of acceptable indoor operative temperatures was fixed in accordance with de Dear's adaptive comfort theory. (author)

  19. Energetic and dynamic: how mitochondria meet neuronal energy demands.

    Directory of Open Access Journals (Sweden)

    Dzhamilja Safiulina

    2013-12-01

    Full Text Available Mitochondria are the power houses of the cell, but unlike the static structures portrayed in textbooks, they are dynamic organelles that move about the cell to deliver energy to locations in need. These organelles fuse with each other then split apart; some appear anchored and others more free to move around, and when damaged they are engulfed by autophagosomes. Together, these processes-mitochondrial trafficking, fusion and fission, and mitophagy-are best described by the term "mitochondrial dynamics". The molecular machineries behind these events are relatively well known yet the precise dynamics in neurons remains under debate. Neurons pose a peculiar logistical challenge to mitochondria; how do these energy suppliers manage to traffic down long axons to deliver the requisite energy supply to distant parts of the cell? To date, the majority of neuronal mitochondrial dynamics studies have used cultured neurons, Drosophila larvae, zebrafish embryos, with occasional experiments in resting mouse nerves. However, a new study in this issue of PLOS Biology from Marija Sajic and colleagues provides an in vivo look at mitochondrial dynamics along resting and electrically active neurons of live anaesthetized mice.

  20. Study on the Standard Definitions and Methods of Energy Supply and Demand Statistics

    Energy Technology Data Exchange (ETDEWEB)

    Park, T.S. [Korea Energy Economics Institute, Euiwang (Korea)

    2001-11-01

    It is no doubt that a successful national energy policy depends on how deeply is understood the structure of energy supply and demand. It, however, is quite difficult to make out the precise statistics of the energy supply and demand statistics without the technical knowledge. We need to consider reporting the energy statistics as constructing an infrastructure in its field. With several revisions of reporting data system, the energy statistics have been developed, but they still have many problems due to the shortage of energy statistic data. This study indicates the technical problems of reporting system by energy sources and suggests the improving ways about how to collect and report energy supply and demand statistics. Concerning the statistics of oil supply and demand, this study suggests definition and reporting methods on the annual oil statistics of IEA and shows revised data on the national report submitted to IEA 2000. Also to calculate precise coal supply and demand, coal conversion processes, relationship of inputs of coking coal through coke oven coke, COG and BFG are considered in this study. To include auto-producer electricity and heat for sale in the transformation sector of energy balance, related data are collected and how much is used for electricity generation and heat for sale are estimated. To avoid double counting, it shows how each amount is subtracted from the corresponding sector. In order to a success of establishing energy policies and strategies, they need to be based on the well-framed statistics on energy supply and demand. Therefore we all should keep in mind that continuing interests and supports are necessary to set up the energy data system. And to develop the energy statistical system, more consistent institutional framework is necessary to be established along with the technical solution. (author). 23 refs., 11 figs., 45 tabs.

  1. Holidays in lights: Tracking cultural patterns in demand for energy services

    Science.gov (United States)

    Román, Miguel O.; Stokes, Eleanor C.

    2015-06-01

    Successful climate change mitigation will involve not only technological innovation, but also innovation in how we understand the societal and individual behaviors that shape the demand for energy services. Traditionally, individual energy behaviors have been described as a function of utility optimization and behavioral economics, with price restructuring as the dominant policy lever. Previous research at the macro-level has identified economic activity, power generation and technology, and economic role as significant factors that shape energy use. However, most demand models lack basic contextual information on how dominant social phenomenon, the changing demographics of cities, and the sociocultural setting within which people operate, affect energy decisions and use patterns. Here we use high-quality Suomi-NPP VIIRS nighttime environmental products to: (1) observe aggregate human behavior through variations in energy service demand patterns during the Christmas and New Year's season and the Holy Month of Ramadan and (2) demonstrate that patterns in energy behaviors closely track sociocultural boundaries at the country, city, and district level. These findings indicate that energy decision making and demand is a sociocultural process as well as an economic process, often involving a combination of individual price-based incentives and societal-level factors. While nighttime satellite imagery has been used to map regional energy infrastructure distribution, tracking daily dynamic lighting demand at three major scales of urbanization is novel. This methodology can enrich research on the relative importance of drivers of energy demand and conservation behaviors at fine scales. Our initial results demonstrate the importance of seating energy demand frameworks in a social context.

  2. Energy demand modelling and GHG emission reduction: case study Croatia

    DEFF Research Database (Denmark)

    Pukšec, Tomislav; Mathiesen, Brian Vad; Novosel, Tomislav

    2013-01-01

    In the light of new European energy-climate package and its measures for increasing security of supply, decreasing the impact on environment and stimulating sustainable development with special emphasis on job creation and regional growth, Croatia as a future EU member state, needs to reconsider...... GHG module was assembled and added to the NeD model covering all six sectors and calculating its emissions. The model is based on bottom up approach, where data was available, which combines and process large number of input data at the end use level. NeD model was used to present different future GHG...

  3. A Framework for Understanding and Generating Integrated Solutions for Residential Peak Energy Demand

    Science.gov (United States)

    Buys, Laurie; Vine, Desley; Ledwich, Gerard; Bell, John; Mengersen, Kerrie; Morris, Peter; Lewis, Jim

    2015-01-01

    Supplying peak energy demand in a cost effective, reliable manner is a critical focus for utilities internationally. Successfully addressing peak energy concerns requires understanding of all the factors that affect electricity demand especially at peak times. This paper is based on past attempts of proposing models designed to aid our understanding of the influences on residential peak energy demand in a systematic and comprehensive way. Our model has been developed through a group model building process as a systems framework of the problem situation to model the complexity within and between systems and indicate how changes in one element might flow on to others. It is comprised of themes (social, technical and change management options) networked together in a way that captures their influence and association with each other and also their influence, association and impact on appliance usage and residential peak energy demand. The real value of the model is in creating awareness, understanding and insight into the complexity of residential peak energy demand and in working with this complexity to identify and integrate the social, technical and change management option themes and their impact on appliance usage and residential energy demand at peak times. PMID:25807384

  4. Reducing Demand Charges and Onsite Generation Variability Using Behind-the-Meter Energy Storage

    Energy Technology Data Exchange (ETDEWEB)

    Bhattarai, Bishnu P.; Myers, Kurt S.; Bush, Jason W.

    2017-04-01

    Electric utilities in the United States are increasingly employing demand charges and/or real-time pricing. This directive is bringing potential opportunities in deploying behindthe-meter energy storage (BMES) systems for various grid functionalities. This study quantifies techno-economic benefits of BMES in reducing demand charge and smoothing load/generation intermittencies, and determines how those benefits vary with onsite distributed photovoltaic. We proposed a two-stage control algorithm, whereby the first stage proactively determines costoptimal BMES configuration for reducing peak-demands and demand charges, and the second stage adaptively compensates intermittent generations and short load spikes that may otherwise increase the demand charges. The performance of the proposed algorithm is evaluated through a 24 hours time sweep simulation performed using data from smart microgrid testbed at Idaho National Laboratory (INL). The simulation results demonstrated that this research provides a simple but effective solution for peak shaving, demand charge reductions, and smoothing onsite PV variability.

  5. Energy demand hourly simulations and energy saving strategies in greenhouses for the Mediterranean climate

    Science.gov (United States)

    Priarone, A.; Fossa, M.; Paietta, E.; Rolando, D.

    2017-01-01

    This research has been devoted to the selection of the most favourable plant solutions for ventilation, heating and cooling, thermo-hygrometric control of a greenhouse, in the framework of the energy saving and the environmental protection. The identified plant solutions include shading of glazing surfaces, natural ventilation by means of controlled opening windows, forced convection of external air and forced convection of air treated by the HVAC system for both heating and cooling. The selected solution combines HVAC system to a Ground Coupled Heat Pump (GCHP), which is an innovative renewable technology applied to greenhouse buildings. The energy demand and thermal loads of the greenhouse to fulfil the requested internal design conditions have been evaluated through an hourly numerical simulation, using the Energy Plus (E-plus) software. The overall heat balance of the greenhouse also includes the latent heat exchange due to crop evapotranspiration, accounted through an original iterative calculation procedure that combines the E-plus dynamic simulations and the FAO Penman-Monteith method. The obtained hourly thermal loads have been used to size the borehole field for the geothermal heat pump by using a dedicated GCHP hourly simulation tool.

  6. Function and impact of weather files on energy demand simulations

    Directory of Open Access Journals (Sweden)

    Alex González Cáceres

    2013-12-01

    Full Text Available Actualmente se han desarrollado distintos tipos de archivos climáticos para su uso en simulaciones energéticas, cuyo origen depende principalmente de las estaciones meteorológicas, variables ambientales, algoritmos de interpolación y periodos considerados. En atención a esta diversidad cabe preguntarse cuáles son los más apropiados para su utilización en estudios de esta naturaleza para viviendas en Chile, y en particular, para la ciudad de Concepción. Se presenta un análisis comparativo, desarrollado en el contexto del proyecto Fondef D10I10251 , entre tres fuentes de archivos climáticos para Concepción, el primero obtenido a través de la página web de EERE, (U.S. DOE Energy Efficiency and Renewable Energy, el segundo desarrollado por Meteonorm y el último generado a través de los datos proporcionados por un centro de observación geodésica ubicado en Concepción (TIGO. Se puede observar que el origen y método de obtención de datos para la ciudad de Concepción en Chile puede generar diferencias en la demanda de un 24,8%, que en este caso corresponde a 41,34 kWh/m2.

  7. Structural change of the economy, technological progress and long-term energy demand

    Energy Technology Data Exchange (ETDEWEB)

    Klinge Jacobsen, H. [Risoe National Dept., Roskilde (Denmark). Systems Analysis Dept.

    2000-05-01

    The material included in the report is a collection of papers dealing with different issues related to the topics included in the title. Some of these papers have already either been published or presented at various conferences. Together with a general introduction, they constitute the author's PhD dissertation. The dissertation includes six papers and two shorter notes on different aspects of structural change of the economy and energy demand. Three different issues related to long-term energy demand are discussed: (1) the importance of technological change and its representation in energy-economy modelling, (2) an integration of two different modelling approaches, and (3) the effect on energy demand of structural changes exemplified by changes in the energy supply sector and in Danish trade patterns. The report highlights a few aspects of the interaction between structural economic changes and energy demand, but it does not intend to cover a wide range of issues related to these topics. In the introductory chapter some discussions and thoughts about issues not covered by the articles are brought forward. The introductory chapter includes an overview of possible relations between longterm energy demand and the economy, technical progress demography, social conditions and politics. The first two papers discuss the importance for projections of long-term energy demand of the way in which technological progress is modelled. These papers focus on energy-economy modelling. A paper dealing with two different approaches to energy demand modelling and the possible integration of these approaches in the Danish case follows next. The integrated Danish model, is then used for analysing different revenue recycling principles in relation to a CO{sub 2} tax. The effect of subsidising biomass use is compared with recycling through corporate tax rates. Then a paper follows describing the structural change of a specific sector, namely the energy supply sector, and the

  8. Energy demand management and study on energy information system development for establishing policy of reducing green-house gas

    Energy Technology Data Exchange (ETDEWEB)

    Park, H.C. [Inha University, Inchon (Korea, Republic of)

    1998-05-01

    The development of energy statistics system should precede ahead of drafting rational energy saving or carbon dioxide emission policy. The energy efficiency index can be used as energy policy index by estimating the change of energy use and connecting the causes and the result as a statistical amount that can obtain economic growth and economic structure change from energy unit consumption separately. Energy information system estimates energy saving and potential amount of carbon dioxide emission due to the introduction of energy saving technology / saving plan as a database equipped with extensive technical and economic data on energy system. This study analyzes the development debate of energy efficiency index and energy information system, which is indispensable to energy demand management and policy establishment of carbon dioxide emission reduction as a prerequisite task of developing energy information system that will be started soon and presents the frame of energy information system that is suitable to our conditions. 66 refs., 3 figs., 10 tabs.

  9. Norwegian Residential Energy Demand: Coordinated use of a System Engineering and a Macroeconomic Model

    Directory of Open Access Journals (Sweden)

    Tor A Johnsen

    1996-07-01

    Full Text Available In Norway, the system engineering model MARKAL and the macroeconomic model MSG-EE are both used in studies of national CO2 controlling strategies. MARKAL is a linear programming model that calculates a composite set of technologies necessary to meet demand and environmental constraints at minimised total energy expenditure. MSG-EE is an applied general equilibrium model including the link between economic activity, energy demand and emissions to air. MSG-EE has a theory consistent description of the link between income, prices and energy demand, but the representation of technological improvements is simple. MARKAL has a sophisticated description of future energy technology options, but includes no feedback to the general economy. A project for studying the potential for a coordinated use of these two models was initiated and funded by the Norwegian Research Council (NFR. This paper gives a brief presentation of the two models. Results from independent model calculations show that MARKAL gives a signficant lower residential energy demand than MSG-EE does. This is explained by major differences in modelling approach. A first attempt of coordinating the residential energy demand in the models is reported. This attempt shows that implementing results from MARKAL, in MSG-EE for the residential sector alone gives little impact on the general economy. A further development of an iteration procedure between the models should include all energy using sectors.

  10. ENERGY DEMANDS OF THE EXISTING COLLECTIVE BUILDINGS WITH BEARING STRUCTURE OF LARGE PRECAST CONCRETE PANELS FROM TIMISOARA

    Directory of Open Access Journals (Sweden)

    Pescari S.

    2015-05-01

    Full Text Available One of the targets of EU Directives on the energy performance of buildings is to reduce the energy consumption of the existing buildings by finding efficient solutions for thermal rehabilitation. In order to find the adequate solutions, the first step is to establish the current state of the buildings and to determine their actual energy consumption. The current paper aims to present the energy demands of the existing buildings with bearing structure of large precast concrete panels in the city of Timisoara. Timisoara is one of the most important cities in the west side of Romania, being on the third place in terms of size and economic development. The Census of Population and Housing of 2011 states that Timisoara has about 127841 private dwellings and 60 percent of them are collective buildings. Energy demand values of the existing buildings with bearing structure of large precast concrete panels in Timisoara, in their current condition, are higher than the accepted values provided in the Romanian normative, C107. The difference between these two values can reach up to 300 percent.

  11. Evaluating the impact of demand-side management on water resources under changing climatic conditions and increasing population.

    Science.gov (United States)

    Dawadi, Srijana; Ahmad, Sajjad

    2013-01-15

    This study investigated the effect of increasing population and changing climatic conditions on the water resources of a semi-arid region, the Las Vegas Valley (LVV) in southern Nevada. A system dynamics model was developed for the LVV from 1989 to 2035. The impact of climate change on water demand and the water supply from the Colorado River was modeled, using projections from 16 global climate models for 3 emission scenarios. Variability in water demand and supply under different scenarios of population growth and demand management, including water conservation and water pricing, was evaluated. With the population growth that was projected, if no further demand management policies were implemented, the LVV would not be able to meet the water demand in the near future. However, by combining water conservation and pricing policies, the available supply could last well into the future. The reduction in water demand in 2035 was predicted to be 327 million cubic meters (MCM) for 'status quo' population growth, or 30.6%; 408 MCM for 50% of the projected growth, or 38%; and 511 MCM for no population growth, or 47.8%. Water supply reliability decreased significantly with changing climatic conditions. Therefore, major challenges to water sustainability in the LVV would be due to rapid population growth as well as to climate variability. However, with the combination of reduced population growth rate and water conservation policies, the Colorado River supply could meet the future demand of the LVV most of the time.

  12. Consumption of Energy Drinks Among Lebanese Youth: A Pilot Study on the Prevalence and Side Effects

    OpenAIRE

    Itany, Manal; Diab, Batoul; Rachidi, Samar,; Awada, Sanaa; Al Hajje, Amal; Bawab ,Wafaa; Salameh, Pascale

    2014-01-01

    Background: The new millennium has been together with a variety of synthetic and caffeinated high-energy drinks targeting the youth market. Energy drinks raise the level of energy and their consumption has been increased significantly worldwide. Objectives: This research aimed to determine patterns of energy drink consumption and to assess the prevalence of adverse side effects among energy drink users. Patients and Methods: A pilot cross-sectional study survey was undertaken on students aged...

  13. Consumption of Energy Drinks Among Lebanese Youth: A Pilot Study on the Prevalence and Side Effects

    OpenAIRE

    Itany, Manal; Diab, Batoul; Rachidi, Samar,; Awada, Sanaa; Al Hajje, Amal; Bawab, Wafaa; Salameh, Pascale

    2014-01-01

    Background: The new millennium has been together with a variety of synthetic and caffeinated high-energy drinks targeting the youth market. Energy drinks raise the level of energy and their consumption has been increased significantly worldwide. Objectives: This research aimed to determine patterns of energy drink consumption and to assess the prevalence of adverse side effects among energy drink users. Patients and Methods: A pilot cross-sectional study survey was undertaken on students aged...

  14. Global impacts of energy demand on the freshwater resources of nations

    Science.gov (United States)

    Holland, Robert Alan; Scott, Kate A.; Flörke, Martina; Brown, Gareth; Ewers, Robert M.; Farmer, Elizabeth; Kapos, Valerie; Muggeridge, Ann; Taylor, Gail; Barrett, John; Eigenbrod, Felix

    2015-01-01

    The growing geographic disconnect between consumption of goods, the extraction and processing of resources, and the environmental impacts associated with production activities makes it crucial to factor global trade into sustainability assessments. Using an empirically validated environmentally extended global trade model, we examine the relationship between two key resources underpinning economies and human well-being—energy and freshwater. A comparison of three energy sectors (petroleum, gas, and electricity) reveals that freshwater consumption associated with gas and electricity production is largely confined within the territorial boundaries where demand originates. This finding contrasts with petroleum, which exhibits a varying ratio of territorial to international freshwater consumption, depending on the origin of demand. For example, although the United States and China have similar demand associated with the petroleum sector, international freshwater consumption is three times higher for the former than the latter. Based on mapping patterns of freshwater consumption associated with energy sectors at subnational scales, our analysis also reveals concordance between pressure on freshwater resources associated with energy production and freshwater scarcity in a number of river basins globally. These energy-driven pressures on freshwater resources in areas distant from the origin of energy demand complicate the design of policy to ensure security of fresh water and energy supply. Although much of the debate around energy is focused on greenhouse gas emissions, our findings highlight the need to consider the full range of consequences of energy production when designing policy. PMID:26627262

  15. EVOLUTION OF THE DEMAND AND SUPPLY IN ENERGY RESOURCES

    Directory of Open Access Journals (Sweden)

    Silvestru MAXIMILIAN

    2013-06-01

    Full Text Available Economic, social and political development of human society in recent decades put to the fore the issue of natural resources available to the earth; scientists are asking ever more seriously the question to what extent these resources can support the economic development in the future, can provide food and survival of a growing population and will be able to contribute to the eradication of underdevelopment. The emphasis of major events – the population explosion, the trend of depletion of natural resources, environmental deterioration, underdevelopment etc. – was and it is still discussed with increasing responsibility by specialists, being drafted a large number of forecasts for a variable duration perspective. The trend of depletion of natural resources is another phenomenon of the contemporary world and that will become, certainly, even more pronounced in the near future. Harnessing the increasing exhaustible natural resources with low reserves and a slow recovery of renewable resources raises acutely the issue regarding the conservation of these resources. In recent decades, there is a tendency to waste energy and raw materials in the society. There are produced goods without an absolute utility, being imposed artificially by advertising or fashion swings and many products are designed in such a way that it takes little to compel the buyer to replace them. The "consumption" civilization is characterized as a "society that throws" the population of developed countries (18% of world population dispelling waste form 20 to 25% of the material production of the world. Excessive consumption of raw materials and fuel was favoured by their relatively low prices, maintained under the pressure of interests of transnational companies, prices that disfavoured, however, the developing countries. Consequently, consumption of raw materials and fuel turned to the easily accessible resources that have been heavily exploited, partially abandoning some

  16. Using quantum mechanics to improve estimates of amino acid side chain rotamer energies.

    Science.gov (United States)

    Renfrew, P Douglas; Butterfoss, Glenn L; Kuhlman, Brian

    2008-06-01

    Amino acid side chains adopt a discrete set of favorable conformations typically referred to as rotamers. The relative energies of rotamers partially determine which side chain conformations are more often observed in protein structures and accurate estimates of these energies are important for predicting protein structure and designing new proteins. Protein modelers typically calculate side chain rotamer energies by using molecular mechanics (MM) potentials or by converting rotamer probabilities from the protein database (PDB) into relative free energies. One limitation of the knowledge-based energies is that rotamer preferences observed in the PDB can reflect internal side chain energies as well as longer-range interactions with the rest of the protein. Here, we test an alternative approach for calculating rotamer energies. We use three different quantum mechanics (QM) methods (second order Møller-Plesset (MP2), density functional theory (DFT) energy calculation using the B3LYP functional, and Hartree-Fock) to calculate the energy of amino acid rotamers in a dipeptide model system, and then use these pre-calculated values in side chain placement simulations. Energies were calculated for over 36,000 different conformations of leucine, isoleucine, and valine dipeptides with backbone torsion angles from the helical and strand regions of the Ramachandran plot. In a subset of cases these energies differ significantly from those calculated with standard molecular mechanics potentials or those derived from PDB statistics. We find that in these cases the energies from the QM methods result in more accurate placement of amino acid side chains in structure prediction tests.

  17. Residential demand for energy: A review of the empirical literature and some new results

    Science.gov (United States)

    Kirby, S. N.

    1983-01-01

    Demand for energy is derived from the demand for particular end-use service (e.g., warmth, cooling, clothes drying, etc.). This derivative nature of energy demand gives rise to two major, although interrelated, issues: first, a complete model must consider both the demand for services and the demand for energy-using equipment; second, the essentially dynamic nature of the demand requires a clear delineation between short-run and long-run responses. Because of their durability, appliance stocks will be adjusted only over a period of time. In contrast, the intensity of utilization of a given appliance portfolio can be adjusted fairly rapidly. In the short run, defined as the period of time during which appliance stocks are fixed, households are essentially limited in their ability to respond to changes in fuel prices and income. In the long run, households may alter their stock of energy using equipment to reflect more accurately their desired capital stock. As such, longer run responses will be much larger in magnitude than short run responses.

  18. Calcium signaling as a mediator of cell energy demand and a trigger to cell death.

    Science.gov (United States)

    Bhosale, Gauri; Sharpe, Jenny A; Sundier, Stephanie Y; Duchen, Michael R

    2015-09-01

    Calcium signaling is pivotal to a host of physiological pathways. A rise in calcium concentration almost invariably signals an increased cellular energy demand. Consistent with this, calcium signals mediate a number of pathways that together serve to balance energy supply and demand. In pathological states, calcium signals can precipitate mitochondrial injury and cell death, especially when coupled to energy depletion and oxidative or nitrosative stress. This review explores the mechanisms that couple cell signaling pathways to metabolic regulation or to cell death. The significance of these pathways is exemplified by pathological case studies, such as those showing loss of mitochondrial calcium uptake 1 in patients and ischemia/reperfusion injury.

  19. Model documentation report: Residential sector demand module of the national energy modeling system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-01-01

    This report documents the objectives, analytical approach, and development of the National Energy Modeling System (NEMS) Residential Sector Demand Module. The report catalogues and describes the model assumptions, computational methodology, parameter estimation techniques, and FORTRAN source code. This reference document provides a detailed description for energy analysts, other users, and the public. The NEMS Residential Sector Demand Module is currently used for mid-term forecasting purposes and energy policy analysis over the forecast horizon of 1993 through 2020. The model generates forecasts of energy demand for the residential sector by service, fuel, and Census Division. Policy impacts resulting from new technologies, market incentives, and regulatory changes can be estimated using the module. 26 refs., 6 figs., 5 tabs.

  20. Renewable energy: GIS-based mapping and modelling of potentials and demand

    Science.gov (United States)

    Blaschke, Thomas; Biberacher, Markus; Schardinger, Ingrid.; Gadocha, Sabine; Zocher, Daniela

    2010-05-01

    Worldwide demand of energy is growing and will continue to do so for the next decades to come. IEA has estimated that global primary energy demand will increase by 40 - 50% from 2003 to 2030 (IEA, 2005) depending on the fact whether currently contemplated energy policies directed towards energy-saving and fuel-diversification will be effectuated. The demand for Renewable Energy (RE) is undenied but clear figures and spatially disaggregated potentials for the various energy carriers are very rare. Renewable Energies are expected to reduce pressures on the environment and CO2 production. In several studies in Germany (North-Rhine Westphalia and Lower Saxony) and Austria we studied the current and future pattern of energy production and consumption. In this paper we summarize and benchmark different RE carriers, namely wind, biomass (forest and non-forest, geothermal, solar and hydro power. We demonstrate that GIS-based scalable and flexible information delivery sheds new light on the prevailing metaphor of GIS as a processing engine serving needs of users more on demand rather than through ‘maps on stock'. We compare our finding with those of several energy related EU-FP7 projects in Europe where we have been involved - namely GEOBENE, REACCESS, ENERGEO - and demonstrate that more and more spatial data will become available together with tools that allow experts to do their own analyses and to communicate their results in ways which policy makers and the public can readily understand and use as a basis for their own actions. Geoportals in combination with standardised geoprocessing today supports the older vision of an automated presentation of data on maps, and - if user privileges are given - facilities to interactively manipulate these maps. We conclude that the most critical factor in modelling energy supply and demand remain the economic valuation of goods and services, especially the forecast of future end consumer energy costs.

  1. Modeling future demand for energy resources: A study of residential electricity usage in Thailand

    Science.gov (United States)

    Nilagupta, Prapassara

    1999-12-01

    Thailand has a critical need for effective long-term energy planning because of the country's rapidly increasing energy consumption. In this study, the demand for electricity by the residential sector is modeled using a framework that provides detailed estimates of the timing and spatial distribution of changes in energy demand. A population model was developed based on the Cohort-Component method to provide estimates of population by age, sex and urban/non-urban residency in each province. A residential electricity end user model was developed to estimate future electricity usage in urban and non-urban households of the seventy-six provinces in Thailand during the period 1999--2019. Key variables in this model include population, the number of households, family household size, and characteristics of eleven types of electric household appliance such as usage intensity, input power, and saturation rate. The methodology employed in this study is a trending method which utilizes expert opinion to estimate future variables based on a percentage change from the most current value. This study shows that from 1994 to 2019 Thailand will experience an increase in population from 55.4 to 83.6 million. Large percentage population increases will take place in Bangkok, Nonthaburi, Samut Prakarn, Nakhon Pathom and Chonburi. At a national level, the residential electricity consumption will increase from approximately 19,000 to 8 1,000 GWh annually. Consumption in non-urban households will be larger than in urban households, with respective annual increases of 8.0% and 6.2% in 2019. The percent increase of the average annual electricity consumption will be four times the average annual percent population increase. Increased electricity demand is largely a function of increased population and increased demand for high-energy appliances such as air conditioners. In 1994, air conditioning was responsible for xx% of total residential electricity demand. This study estimates that in

  2. 浅析智能电网下的电力需求侧管理%Analysis of Demand Side Management Tasks in Smart Power Grid

    Institute of Scientific and Technical Information of China (English)

    曹京津; 秦立军

    2014-01-01

    Demand Side Management (DSM) will be one of the most important parts of future smart power grid. The DSM algorithms help consumers to be more active contributors in the power system in order to achieve system objectives by scheduling their shift able load. This paper first introduced the smart grid, then introduces the new change of demand side management under the smart grid, finally discuss the new challenges which DSM may face under the smart grid by dividing it into four important parts.%需求侧管理(Demand Side Management, DSM)是未来智能电网中最重要的一个部分。 DSM算法帮助消费者成为电力系统更积极的贡献者,通过可移动的负载来达到系统调度的目的。文章首先介绍了智能电网,接着概括了智能电网下DSM的新变化,最后通过将DSM分为4个重要部分来探讨了智能电网下它所面临的新的挑战。

  3. Electrical power distribution control methods, electrical energy demand monitoring methods, and power management devices

    Science.gov (United States)

    Chassin, David P.; Donnelly, Matthew K.; Dagle, Jeffery E.

    2006-12-12

    Electrical power distribution control methods, electrical energy demand monitoring methods, and power management devices are described. In one aspect, an electrical power distribution control method includes providing electrical energy from an electrical power distribution system, applying the electrical energy to a load, providing a plurality of different values for a threshold at a plurality of moments in time and corresponding to an electrical characteristic of the electrical energy, and adjusting an amount of the electrical energy applied to the load responsive to an electrical characteristic of the electrical energy triggering one of the values of the threshold at the respective moment in time.

  4. Perspective on the energy future of the Northeast United States. [Reduce demand and develop diversified supplies

    Energy Technology Data Exchange (ETDEWEB)

    Brainard, J.; Davitian, H.; Goettle, R. IV; Palmedo, P.F.

    1976-06-01

    This study was undertaken to examine the implications of alternative energy futures for the northeastern U.S. First, the past and present energy supply and demand patterns for the U.S. and the northeast region are reviewed. Then, on the basis of detailed analyses of present and possible future supply and demand activities, scenarios for the years 1985 and 2000 are constructed and compared to examine the implications of various policies that will affect future supply and demand activities. Economic and environmental consequences are also discussed. The principal findings of the study are these: (1) conservation measures can reduce fuel and resource requirements in the northeast by over 30 percent; (2) oil imports are likely to continue to be a major energy resource for the northeast since only if strong conservation measures are combined with large increases in U.S. energy supplies is there apt to be a substantial decline in oil imports to the region; (3) a shift to coal and other alternate energy supplies, coupled with increased conservation, could compensate for a curtailment in the use of nuclear power in the region; (4) new resource technologies are capable of supplying up to 20 percent of the region's energy requirements in 2000; (5) no single supply technology or single conservation strategy taken alone can reduce the region's increasing dependence on foreign oil. Rather, the creation of an acceptable energy system for the region will require efforts in many directions in terms both of reducing demand and developing reliable, diversified supplies.

  5. A Load Prioritization Model for a Smart Demand Responsive Energy Management System in the Residential Sector

    Directory of Open Access Journals (Sweden)

    Suratsavadee Koonlaboon KORKUA

    2014-01-01

    Full Text Available In order to strengthen energy security while reducing environmental impact, particularly from global warming and greenhouse gas (GHG emissions, the government of Thailand has established a 20-year Energy Efficiency Development Plan (EEDP, aiming to reduce a 20 % share of final energy consumption by 2030. The energy saving potential assessment reveals that the forecasted energy saving by the residential sector holds more than 60 % of the overall electricity saving shares. Therefore, in this paper, the situation of Thailand’s energy is presented and the energy conservation plan is reviewed. Next, a smart demand responsive energy management system under ZigBee/IEEE 802.15.4 based wireless communication is proposed. An analysis of demand response potential in terms of a time-of-use (TOU pricing without enabling technology program in Thailand scenario is also investigated. Finally, by using the proposed load characterization and load prioritization under the concept of a smart energy management system, the bill savings benefits of a demand responsive program can be proved while the target of energy saving is also achieved.

  6. Examining demand response, renewable energy and efficiencies to meet growing electricity needs

    Energy Technology Data Exchange (ETDEWEB)

    Elliot, N.; Eldridge, M.; Shipley, A.M.; Laitner, J.S.; Nadel, S. [American Council for an Energy-Efficient Economy, Washington, DC (United States); Silverstein, A. [A. Silverstein Consultant (United States); Hedman, B. [Energy and Environmental Analysis Inc., Arlington, VA (United States); Sloan, M. [Virtus Energy Research Associates, Inc. Austin, TX (United States)

    2007-04-15

    While Texas has already taken steps to improve its renewable energy portfolio (RPS), and its energy efficiency improvement program (EEIP), the level of savings that utilities can achieve through the EEIP can be greatly increased. This report estimated the size of energy efficiency and renewable energy resources in Texas, and suggested a range of policy options that might be adopted to further extend EEIP. Current forecasts suggest that peak demand in Texas will increase by 2.3 per cent annually from 2007-2012, a level of growth which is threatening the state's ability to maintain grid reliability at reasonable cost. Almost 70 per cent of installed generating capacity is fuelled by natural gas in Texas. Recent polling has suggested that over 70 per cent of Texans are willing support increased spending on energy efficiency. Demand response measures that may be implemented in the state include incentive-based programs that pay users to reduce their electricity consumption during specific times and pricing programs, where customers are given a price signal and are expected to moderate their electricity usage. By 2023, the widespread availability of time-varying retail electric rates and complementary communications and control methods will permanently change the nature of electricity demand in the state. At present, the integrated utilities in Texas offer a variety of direct load control and time-of-use, curtailable, and interruptible rates. However, with the advent of retail competition now available as a result of the structural unbundling of investor-owned utilities, there is less demand response available in Texas. It was concluded that energy efficiency, demand response, and renewable energy resources can meet the increasing demand for electricity in Texas over the next 15 years. 4 figs.

  7. STRATEGIC DEMAND-SIDE BIDDING IN MULTIPRODUCT CONTRACT AUCTIONS OF RENEWABLE ENERGY

    OpenAIRE

    GIULIANA CASSARA DE CASTELLAMMARE SCOTT SICILIANO

    2010-01-01

    Atualmente, o mundo tem se voltado à promoção do desenvolvimento da energia proveniente de fontes renováveis, pois estas aparecem como uma alternativa para a redução do aquecimento global. No Brasil, as principais fontes de geração renováveis de energia são: geração de cogeração à bagaço de cana-deaçúcar (biomassa), eólica e pequenas centrais hidrelétricas (PCH). Atualmente, o grande desafio enfrentado por elas é comercialização de contratos lastreados em perfis de geração q...

  8. Implementation of Demand Side Flexibility from the perspective of Europe’s Energy Directives

    DEFF Research Database (Denmark)

    Edelenbos, Edwin; Togeby, Mikael; Wittchen, Kim Bjarne

    2015-01-01

    in customer changes that may or may not have an impact on the convenience and comfort level of end-users. In general, it is expected that DSF for consumers can only be successful if the impact of DSF on the comfort and convenience level for consumers is minimal. The success of DSF among consumers is likely....... Grid operators may provide customers with grid related signals to manage congestion or to keep the frequency of the network stable. Price signals from the market can come from the wholesale market, e.g. day-ahead or intra-day markets. Suppliers or other commercial parties (such as aggregators...... that collect small quantities of end user flexibility and give those aggregated volumes a value on wholesale markets or as ancillary service) may provide customers with price signals because, e.g. when wholesale prices are very low or extremely high. The price signals or incentives are expected to result...

  9. A Unit Commitment Model with Demand Response for the Integration of Renewable Energies

    OpenAIRE

    IKEDA Yuichi; Ikegami, Takashi; Kataoka, Kazuto; Ogimoto, Kazuhiko

    2011-01-01

    The output of renewable energy fluctuates significantly depending on weather conditions. We develop a unit commitment model to analyze requirements of the forecast output and its error for renewable energies. Our model obtains the time series for the operational state of thermal power plants that would maximize the profits of an electric power utility by taking into account both the forecast of output its error for renewable energies and the demand response of consumers. We consider a power s...

  10. Predicted changes in energy demands for heating and cooling due to climate change

    Science.gov (United States)

    Dolinar, Mojca; Vidrih, Boris; Kajfež-Bogataj, Lučka; Medved, Sašo

    In the last 3 years in Slovenia we experienced extremely hot summers and demand for cooling the buildings have risen significantly. Since climate change scenarios predict higher temperatures for the whole country and for all seasons, we expect that energy demand for heating would decrease while demand for cooling would increase. An analysis for building with permitted energy demand and for low-energy demand building in two typical urban climates in Slovenia was performed. The transient systems simulation program (TRNSYS) was used for simulation of the indoor conditions and the energy use for heating and cooling. Climate change scenarios were presented in form of “future” Test Reference Years (TRY). The time series of hourly data for all meteorological variables for different scenarios were chosen from actual measurements, using the method of highest likelihood. The climate change scenarios predicted temperature rise (+1 °C and +3 °C) and solar radiation increase (+3% and +6%). With the selection of these scenarios we covered the spectra of possible predicted climate changes in Slovenia. The results show that energy use for heating would decrease from 16% to 25% (depends on the intensity of warming) in subalpine region, while in Mediterranean region the rate of change would not be significant. In summer time we would need up to six times more energy for cooling in subalpine region and approximately two times more in Mediterranean region. low-energy building proved to be very economical in wintertime while on average higher energy consumption for cooling is expected in those buildings in summertime. In case of significant warmer and more solar energy intensive climate, the good isolated buildings are more efficient than standard buildings. TRY proved not to be efficient for studying extreme conditions like installed power of the cooling system.

  11. Energy systems scenario modelling and long term forecasting of hourly electricity demand

    Directory of Open Access Journals (Sweden)

    Poul Alberg Østergaard

    2015-06-01

    Full Text Available The Danish energy system is undergoing a transition from a system based on storable fossil fuels to a system based on fluctuating renewable energy sources. At the same time, more of and more of the energy system is becoming electrified; transportation, heating and fuel usage in industry and elsewhere. This article investigates the development of the Danish energy system in a medium year 2030 situation as well as in a long-term year 2050 situation. The analyses are based on scenario development by the Danish Climate Commission. In the short term, it is investigated what the effects will be of having flexible or inflexible electric vehicles and individual heat pumps, and in the long term it is investigated what the effects of changes in the load profiles due to changing weights of demand sectors are. The analyses are based on energy systems simulations using EnergyPLAN and demand forecasting using the Helena model. The results show that even with a limited short-term electric car fleet, these will have a significant effect on the energy system; the energy system’s ability to integrated wind power and the demand for condensing power generation capacity in the system. Charging patterns and flexibility have significant effects on this. Likewise, individual heat pumps may affect the system operation if they are equipped with heat storages. The analyses also show that the long-term changes in electricity demand curve profiles have little impact on the energy system performance. The flexibility given by heat pumps and electric vehicles in the long-term future overshadows any effects of changes in hourly demand curve profiles.

  12. Regional Differences in the Price-Elasticity of Demand for Energy

    Energy Technology Data Exchange (ETDEWEB)

    Bernstein, M. A.; Griffin, J.

    2006-02-01

    At the request of the National Renewable Energy Laboratory (NREL), the RAND Corporation examined the relationship between energy demand and energy prices with the focus on whether the relationships between demand and price differ if these are examined at different levels of data resolution. In this case, RAND compares national, regional, state, and electric utility levels of data resolution. This study is intended as a first step in helping NREL understand the impact that spatial disaggregation of data can have on estimating the impacts of their programs. This report should be useful to analysts in NREL and other national laboratories, as well as to policy nationals at the national level. It may help them understand the complex relationships between demand and price and how these might vary across different locations in the United States.

  13. Urbanization impact on energy demand and CO2 emission in China

    Institute of Scientific and Technical Information of China (English)

    BaorenWEI; HiroshiYAGITA; AtsushiINABA; MasayukiSAGISAKA

    2003-01-01

    Urbanization has been believed a driving force of GDP growth in China. In the other hand, urbanization will atso impose some impact on energy demand and CO2 emissions. The calculation method of this impact is presented in this paper. It has been assumed that in 2003 the urbanization rate in China will have a unit (1 %) growth, GDP growth and its partition in agriculture, secondary industry and tertiary industry are calculated. The corresponding energy demand for GDP growth, household and transportation and CO2 emissions are further calculated. The calculation has been carried out by a computer program NICE Ⅲ developed in LCA Research Center AIST Japan. It has been found that 1 % increase of urbanization rate will cause 1 % of total energy demand and 1.2 % CO2 emissions in China in 2003.

  14. Participation in Non-Formal Learning in EU-15 and EU-8 Countries: Demand and Supply Side Factors

    Science.gov (United States)

    Roosmaa, Eve-Liis; Saar, Ellu

    2012-01-01

    The main purpose of this paper is to provide an in-depth analysis of participation in non-formal learning in different European Union member states. The paper also seeks to extend analysis of the training gap by pursuing the distinction between the supply and the demand for skills. We use aggregate data from the Adult Education Survey (Eurostat)…

  15. Synthesis, surface characterization, and biointeraction studies of low-surface energy side-chain polyetherurethanes

    Science.gov (United States)

    Porter, Stephen Christopher

    1999-10-01

    New segmented polyetherurethanes (PEUs) with low surface energy hydrocarbon and fluorocarbon side-chains attached to the polymer hard segments were synthesized. The surface chemistry of solvent cast polymer films was studied using X-ray photoelectron spectroscopy, time-of-flight secondary ion mass spectrometry, and dynamic contact angle (DCA) measurements. Increases in the overall density and length of the alkyl side-chains within the PEUs resulted in greater side-chain concentrations at the polymer surface. PEUs bearing long alkyl (> C10 ) and perfluorocarbon side-chains were found to posses surfaces with highly enriched side-chain concentrations relative to the bulk polymer. In PEUs with significant side-chain surface enrichment, the relatively polar hard segment blocks were shown to reside in high concentrations just below the side-chain enriched surface layer. Furthermore, DCA measurements demonstrated that the surface of the alkyl side-chain PEUs did not undergo significant rearrangement when placed into an aqueous environment, whereas the surface of a hard segment model polymer bearing C18 sidechains (PEU-C18-HS) did. Hydrogen bonding within the PEUs was examined using FTIR and was shown to be disrupted by the addition of side-chains; an effect dependent on the density but not on the length of the side-chains. Heteropolymer blends comprised of mixtures of high side-chain density and side-chain free PEUs were compared with homopolymers having the same overall side-chain concentration as the blends. Significantly more surface enrichment of side-chains was found in the heteropolymer blends whereas hydrogen bonding nearly the same as in the homopolymers. Adsorption of native and delipidized human serum albumin (HSA) from pure solution and blood plasma; the elutabilty of adsorbed HSA; and static platelet adhesion to plasma preadsorbed surfaces, were all examined on alkyl side-chain PEUs. Several polymers with high C18 side-chain densities displayed increased

  16. Supplementing energy demand of rural households in Bangladesh through appropriate biogas technology

    DEFF Research Database (Denmark)

    Ashekuzzaman, S.M.; Badruzzaman, A.B.M.; Rafiqul Hoque, A.T.M.

    2010-01-01

    This paper has sought to show the potential of energy recovery from rurally available agro and household organic wastes and thus, the possible impact on supplementing energy demand, reducing deforestation, and replacing fossil fuel as well as avoided greenhouse gases. Results show that co......-digestion of a wide range of manure, crop residues and household wastes with cow manure was successful to produce increased gas yield than what would be if cow dung is digested separately and the energy value from this can supplement 57–79% of the rural energy demand, depending on the methane yield from organic waste...... mixtures. However, particularly considering for cooking purpose, it can save 1586–2213 Kg firewood/Household/year. Therefore, the results suggests that implementation of co-digestion in the centralized plant could be a viable solution to produce decentralized energy for the rural households in terms...

  17. Supplementing energy demand of rural households in Bangladesh through appropriate biogas technology

    DEFF Research Database (Denmark)

    Ashekuzzaman, S.M.; Badruzzaman, A.B.M.; Rafiqul Hoque, A.T.M.

    2010-01-01

    This paper has sought to show the potential of energy recovery from rurally available agro and household organic wastes and thus, the possible impact on supplementing energy demand, reducing deforestation, and replacing fossil fuel as well as avoided greenhouse gases. Results show that co......-digestion of a wide range of manure, crop residues and household wastes with cow manure was successful to produce increased gas yield than what would be if cow dung is digested separately and the energy value from this can supplement 57–79% of the rural energy demand, depending on the methane yield from organic waste...... mixtures. However, particularly considering for cooking purpose, it can save 1586–2213 Kg firewood/Household/year. Therefore, the results suggests that implementation of co-digestion in the centralized plant could be a viable solution to produce decentralized energy for the rural households in terms...

  18. Demand response - Non-electric storage devices for electric utilities with a high participation of renewable energy sources; Demand response - Nichtelektrische Speicher fuer Elektrizitaetsversorgungssysteme mit hohem Anteil erneuerbarer Energien

    Energy Technology Data Exchange (ETDEWEB)

    Stadler, I.

    2005-10-15

    Electrical power supply is mainly based on fossil and nuclear fuels. Their availability will be dramatically reduced within the next half century. The only possibility to maintain our high living and economic standard which is based on high energy consumption will be a reorganisation of our supplies towards renewable energies such as wind, photovoltaics and biomass. It is generally accepted that the maximum fraction of stochastically available renewable energies that can be integrated into our electricity supplies is 20 to 25 %. Reasons are stability of the electricity network and absence of possibilities to store large amounts of electricity. The author demonstrates that by integrating already existing intrinsic storage capacities on the demand side into the control of electricity supplies there is no longer an upper limit for integration of renewable energies. The following technologies on the demand side are taken into account: storage heating and electrical water heating, ventilation, refrigeration, circulation pumps and compressed air in industry. Furthermore, changes in user behaviour, compressed air energy storage, and transition to flexible electricity usage by integration of thermal storage are discussed. (orig.)

  19. Mexico's long-term energy outlook : results of a detailed energy supply and demand simulation

    Energy Technology Data Exchange (ETDEWEB)

    Conzelmann, G. [Argonne National Laboratory, Argonne, IL (United States); Quintanilla, J. [Nacional de Autonoma de Mexico Univ., Mexico City (Mexico). Direccion General de Servicios de Computo Academico; Aguilar, V. [Secretaria de Energia, Mexico City (Mexico); Conde, L.A. [Inst. Nacional de Ecologia, Mexico City (Mexico); Fernandez, J. [Comision Federal de Electricidad, Mexico City (Mexico); Mar, E. [Inst. Mexicano del Petroleo, Mexico City (Mexico); Martin del Campo, C.; Serrato, G.; Ortega, R. [Nacional de Autonoma de Mexico Univ., Mexico City (Mexico). Facultad de Ingenieria

    2006-04-15

    This article discussed the results of a bottom-up analysis of Mexico's energy markets which was conducted using an energy and power evaluation program. The program was used to develop energy market forecasts to the year 2025. In the first phase of the study, dynamic optimization software was used to determine the optimal, least-cost generation system expansion path to meet growing demand for electricity. A separate model was used to determine the optimal generating strategy of mixed hydro-thermal electric power systems. In phase 2, a nonlinear market-based approach was used to determine the energy supply and demand balance for the entire energy system, as well as the response of various segments of the energy system to changes in energy price and demand levels. Basic input parameters included information on the energy system structure; base-year energy statistics; and, technical and policy constraints. A total of 14 scenarios were modelled to examine variations in load growth, sensitivities to changes in projected fuel prices, variations in assumed natural gas availability, system reliability targets, and the potential for additional nuclear capacity. Forecasts for the entire energy system were then developed for 4 scenarios: (1) reference case; (2) limited gas scenario; (3) renewable energy; and (4) additional nuclear power generation capacity. Results of the study showed that Mexico's crude oil production is projected to increase annually by 1 per cent to 2025. Imports of petroleum products resulting from the country's rapidly growing transportation sector will increase. Demand for natural gas is expected to outpace projected domestic production. The long-term market outlook for Mexico's electricity industry shows a heavy reliance on natural gas-based generating technologies. It was concluded that alternative results for a constrained-gas scenario showed a substantial shift to coal-based generation and associated effects on the natural gas

  20. Mechanisms of mitochondrial response to variations in energy demand in eukaryotic cells.

    Science.gov (United States)

    Devin, Anne; Rigoulet, Michel

    2007-01-01

    This review focuses on the different mechanisms involved in the adjustment of mitochondrial ATP production to cellular energy demand. The oxidative phosphorylation steady state at constant mitochondrial enzyme content can vary in response to energy demand. However, such an adaptation is tightly linked to a modification in both oxidative phosphorylation yield and phosphate potential and is obviously very limited in eukaryotic cells. We describe the three main mechanisms involved in mitochondrial response to energy demand. In heart cells, a short-term adjustment can be reached mainly through metabolic signaling via phosphotransfer networks by the compartmentalized energy transfer and signal transmission. In such a complex regulatory mechanism, Ca(2+) signaling participates in activation of matricial dehydrogenases as well as mitochondrial ATP synthase. These processes allow a large increase in ATP production rate without an important modification in thermodynamic forces. For a long-term adaptation, two main mechanisms are involved: modulation of the mitochondrial enzyme content as a function of energy demand and/or kinetic regulation by covalent modifications (phosphorylations) of some respiratory chain complex subunits. Regardless of the mechanism involved (kinetic regulation by covalent modification or adjustment of mitochondrial enzyme content), the cAMP signaling pathway plays a major role in molecular signaling, leading to the mitochondrial response. We discuss the energetic advantages of these mechanisms.

  1. Monitoring urban transport air pollution and energy demand in Rawalpindi and Islamabad using leap model

    Energy Technology Data Exchange (ETDEWEB)

    Shabbir, Rabia; Ahmad, Sheikh Saeed [Department of Environmental Sciences, Fatima Jinnah Women University, Rawalpindi (Pakistan)

    2010-05-15

    A research associated with urban transportation was carried out in Rawalpindi and Islamabad to analyze the status of emission of air pollutants and energy demands. The study included a discussion of past trends and future scenarios in order to reduce the future emissions. A simple model of passenger transport has been developed using computer based software called Long-Range Energy Alternatives Planning System (LEAP). The LEAP model was used to estimate total energy demand and the vehicular emissions for the base year 2000 and extrapolated till 2030 for the future predictions. Transport database in Rawalpindi and Islamabad, together with fuel consumption values for the vehicle types and emission factors of NO{sub x}, SO{sub 2} and PM{sub 10} corresponding to the actual vehicle types, formed the basis of the transport demand, energy consumption and total emission calculations. Apart from base scenario, the model was run under three alternative scenarios to study the impact of different urban transport policy initiatives that would reduce energy demand and emissions in transport sector of Rawalpindi and Islamabad. The prime objective was to arrive at an optimal transport policy, which limits the future growth of fuel consumption as well as air pollution. (author)

  2. Impacts of Climate Change on Energy Consumption and Peak Demand in Buildings: A Detailed Regional Approach

    Energy Technology Data Exchange (ETDEWEB)

    Dirks, James A.; Gorrissen, Willy J.; Hathaway, John E.; Skorski, Daniel C.; Scott, Michael J.; Pulsipher, Trenton C.; Huang, Maoyi; Liu, Ying; Rice, Jennie S.

    2015-01-01

    This paper presents the results of numerous commercial and residential building simulations, with the purpose of examining the impact of climate change on peak and annual building energy consumption over the portion of the Eastern Interconnection (EIC) located in the United States. The climate change scenario considered (IPCC A2 scenario as downscaled from the CASCaDE data set) has changes in mean climate characteristics as well as changes in the frequency and duration of intense weather events. This investigation examines building energy demand for three annual periods representative of climate trends in the CASCaDE data set at the beginning, middle, and end of the century--2004, 2052, and 2089. Simulations were performed using the Building ENergy Demand (BEND) model which is a detailed simulation platform built around EnergyPlus. BEND was developed in collaboration with the Platform for Regional Integrated Modeling and Analysis (PRIMA), a modeling framework designed to simulate the complex interactions among climate, energy, water, and land at decision-relevant spatial scales. Over 26,000 building configurations of different types, sizes, vintages, and, characteristics which represent the population of buildings within the EIC, are modeled across the 3 EIC time zones using the future climate from 100 locations within the target region, resulting in nearly 180,000 spatially relevant simulated demand profiles for each of the 3 years. In this study, the building stock characteristics are held constant based on the 2005 building stock in order to isolate and present results that highlight the impact of the climate signal on commercial and residential energy demand. Results of this analysis compare well with other analyses at their finest level of specificity. This approach, however, provides a heretofore unprecedented level of specificity across multiple spectrums including spatial, temporal, and building characteristics. This capability enables the ability to

  3. Demand-side financing measures to increase maternal health service utilisation and improve health outcomes: a systematic review of evidence from low- and middle-income countries.

    Science.gov (United States)

    Murray, Susan F; Hunter, Benjamin M; Bisht, Ramila; Ensor, Tim; Bick, Debra

    2012-01-01

    In many countries financing for health services has traditionally been disbursed directly from governmental and non-governmental funding agencies to providers of services: the 'supply-side' of healthcare markets. Demand-side financing offers a supplementary model in which some funds are instead channelled through, or to, prospective users. In this review we considered evidence on five forms of demand-side financing that have been used to promote maternal health in developing countries: OBJECTIVES: The overall review objective was to assess the effects of demand-side financing interventions on maternal health service utilisation and on maternal health outcomes in low- and middle-income countries. Broader effects on perinatal and infant health, the situation of underprivileged women and the health care system were also assessed. This review considered poor, rural or socially excluded women of all ages who were either pregnant or within 42 days of the conclusion of pregnancy, the limit for postnatal care as defined by the World Health Organization. The review also considered the providers of services.The intervention of interest was any programme that incorporated demand-side financing as a mechanism to increase the consumption of goods and services that could impact on maternal health outcomes. This included the direct consumption of maternal health care goods and services as well as related 'merit goods' such as improved nutrition. We included systems in which potential users of maternal health services are financially empowered to make restricted decisions on buying maternal health-related goods or services - sometimes known as consumer-led demand-side financing. We also included programmes that provided unconditional cash benefits to pregnant women (for example in the form of maternity allowances), or to families with children under five years of age where there was evidence concerning maternal health outcomes.We aimed to include quantitative studies (experimental

  4. Effects of demand-side financing on utilisation, experiences and outcomes of maternity care in low- and middle-income countries: a systematic review.

    Science.gov (United States)

    Murray, Susan F; Hunter, Benjamin M; Bisht, Ramila; Ensor, Tim; Bick, Debra

    2014-01-17

    Demand-side financing, where funds for specific services are channelled through, or to, prospective users, is now employed in health and education sectors in many low- and middle-income countries. This systematic review aimed to critically examine the evidence on application of this approach to promote maternal health in these settings. Five modes were considered: unconditional cash transfers, conditional cash transfers, short-term payments to offset costs of accessing maternity services, vouchers for maternity services, and vouchers for merit goods. We sought to assess the effects of these interventions on utilisation of maternity services and on maternal health outcomes and infant health, the situation of underprivileged women and the healthcare system. The protocol aimed for collection and synthesis of a broad range of evidence from quantitative, qualitative and economic studies. Nineteen health and social policy databases, seven unpublished research databases and 27 websites were searched; with additional searches of Indian journals and websites. Studies were included if they examined demand-side financing interventions to increase consumption of services or goods intended to impact on maternal health, and met relevant quality criteria. Quality assessment, data extraction and analysis used Joanna Briggs Institute standardised tools and software. Outcomes of interest included maternal and infant mortality and morbidity, service utilisation, factors required for successful implementation, recipient and provider experiences, ethical issues, and cost-effectiveness. Findings on Effectiveness, Feasibility, Appropriateness and Meaningfulness were presented by narrative synthesis. Thirty-three quantitative studies, 46 qualitative studies, and four economic studies from 17 countries met the inclusion criteria. Evidence on unconditional cash transfers was scanty. Other demand-side financing modes were found to increase utilisation of maternal healthcare in the index

  5. Influence of the Type of Marking and the Number of Players on Physiological and Physical Demands During Sided Games in Soccer

    Directory of Open Access Journals (Sweden)

    Casamichana David

    2015-09-01

    Full Text Available The aim of this research was to examine the influence of two variables, the type of marking (with or without man-marking and the number of players per team (3, 6, or 9 on the physical and physiological demands of sided games in soccer. Eighteen amateur players were monitored with GPS and heart rate devices. The following variables were analyzed: a maximum heart rate, a mean heart rate, time spent in each intensity range, total distance covered and distance covered in different speed ranges, a player load, maximum speed reached, and a work:rest ratio. The results showed that the type of marking influenced the physical demands of players, with greater total distance, a player load and a work:rest ratio when man-marking was used in the 3 vs. 3 (737 m, 95 Arbitrary Units (AU and 3.4 AU, respectively and 6 vs. 6 (783 m, 95 AU and 5.3 AU, respectively games (p<0.05. The number of players also had an effect on physiological intensity, with more time being spent at the <80%HRmax during the 9 vs. 9 and 6 vs. 6 games (more than 30% compared with the 3 vs. 3 format (less than 15% (p<0.05. These findings could help coaches to understand how the modification of different variables in sided games influences the physical and physiological demands of players.

  6. Impact of kiln thermal energy demand and false air on cement kiln flue gas CO2 capture

    Energy Technology Data Exchange (ETDEWEB)

    Arachchige, Udara S.P.R.; Kawan, Dinesh; Tokheim, Lars-Andre [Telemark University College, Porsgrunn (Norway); Melaaen, Morten C. [Telemark University College, Porsgrunn (Norway); (Tel-Tek, Porsgrunn (Norway)

    2013-07-01

    The present study is focused on the effect of the specific thermal energy demand and the false air factor on carbon capture applied to cement kiln exhaust gases. The carbon capture process model was developed and implemented in Aspen Plus. The model was developed for flue gases from a typical cement clinker manufacturing plant. The specific thermal energy demand as well as the false air factor of the kiln system were varied in order to determine the effect on CO2 capture plant performance, such as the solvent regeneration energy demand. In general, an increase in the mentioned kiln system factors increases the regeneration energy demand. The reboiler energy demand is calculated as 3270, 3428 and 3589 kJ/kg clinker for a specific thermal energy of 3000, 3400 and 3800 kJ/kg clinker, respectively. Setting the false air factor to 25, 50 or 70% gives a reboiler energy demand of 3428, 3476, 3568 kJ/kg clinker, respectively.

  7. Technical and physical demands of small vs. large sided games in relation to playing position in elite soccer

    DEFF Research Database (Denmark)

    Dellal, A; Owen, A; Wong, D P

    2012-01-01

    positional roles participated in the study (25.3±2.4years, 182.4±2.3cm, 77.3±4.1kg; M±SD). Players completed three different conditioned small-sided 4 vs. 4 games (1 ball touch=1T, 2 ball touches=2T and Free Play=FP) as well as two friendly matches. Heart rate (HR), blood lactate ([La]), ratings of perceived...

  8. Information and Communications Systems for Control-by-Price of Distributed Energy Resources and Flexible Demand

    DEFF Research Database (Denmark)

    Nyeng, Preben; Østergaard, Jacob

    2011-01-01

    The control-by-price concept fits well with controlling small-scale generation, storage and demand. In this paper, we investigate the required information and communications systems that are needed to realize the control-by-price concept for such units. We first present a proposal for overall...... distributed energy resources and flexible demand as a regulating resource. Furthermore, the results illustrate and verify the applicability of the concept and the proposed infrastructure for controlling distributed energy resources and flexible demand....... infrastructure and subsystem design and secondly focus on the design and implementation of the end-user price-responsive controller, interfaces, and communications. The design and its applicability on existing devices is verified through laboratory tests with two cases: electric space heating thermostat control...

  9. Economic growth, energy demand and the environment. Empirical insights using time series and decomposition analysis

    Energy Technology Data Exchange (ETDEWEB)

    Boehm, Dirk C.

    2011-07-01

    Industrialization and increasing mobility in developing countries like China and India are resulting in growing energy demand. This hunger for energy is largely satisfied by fossil fuels and thus accompanied by rising emissions. This book aims at empirically giving insights about the relationship between energy consumption, economic growth and CO{sub 2} emissions using recent panel cointegration and decomposition methods. The investigation is carried out for the top energy consumers and CO{sub 2} emitters worldwide with a special emphasis on the European Union and some focus countries for the detailed analysis of the industry and transport sector. The results confirm the need for a more sustainable energy system by implementing measures of energy efficiency and reducing carbon intensity of energy supply by shifting from fossil fuels to renewable energy sources. (orig.)

  10. Theory and key problems for automated demand response of user side considering generalized demand side resources%计及广义需求侧资源的用户侧自动响应机理与关键问题

    Institute of Scientific and Technical Information of China (English)

    汤庆峰; 刘念; 张建华

    2014-01-01

    Automated demand response (Auto-DR) is one of the key technologies in smart grid. When the generalized demand side resources (DSR) are connected to the grid, the implementation of auto-DR on the user side needs more requirements. Firstly, this paper introduces the basic form of smart unit of the electricity consumption on the user side and analyses the applicability of DSR such as controllable load, distributed energy resources, energy storage and electric vehicles. Two operation modes of auto-DR (“Independent users & smart unit” and “collective users & aggregated smart unit”) are proposed, and their related electrical and information structure is also introduced. Secondly, the research status and development of auto-DR on user side are summarized, including system architecture design, load features and forecasting of different type of users, categories of load type and control models, optimization models and methods, etc. Finally, the paper concludes that key problems such as short-term load forecast of users, models of load regulation and planning, optimized operation for auto-DR and comprehensive benefit evaluation still need further research.%自动需求响应是智能电网的关键技术之一,在广义需求侧资源接入的情况下,对用户侧如何实施自动需求响应提出了更高要求。首先,介绍了用户侧的智能用电单元的基本形态,分析了负荷、分布式电源、储能与电动汽车等需求侧资源的适用性;提出了“独立用户+节点型智能用电单元”与“集体用户+聚合型智能用电单元”两种用户自动需求响应运行模式,并给出了相应的电气与信息架构。其次,从系统架构设计、用户负荷特征及负荷预测、负荷可调控性及控制模型、优化模型与方法等多个方面综述了用户侧自动需求响应的国内外研究现状及发展动态。最后,总结分析认为用户侧短期负荷预测、负荷可调控性与可计划

  11. Towards Energy Demand Reduction in Social Housing Buildings: Envelope System Optimization Strategies

    Directory of Open Access Journals (Sweden)

    Paula M. Esquivias

    2012-07-01

    Full Text Available This work evaluates the potential for the reduction of energy demand in residential buildings by acting on the exterior envelope, both in newly constructed buildings and in the retrofitting of existing stock. It focuses on analysing social housing buildings in Mediterranean areas and on quantifying the scope of that reduction in the application of different envelope design strategies, with the purpose of prioritizing their application based on their energy efficiency. The analyses and quantifications were made by means of the generation of energy models with the TRNSYS tool for simple or combined solutions, identifying possible potentials for reduction of the energy demand from 20% to 25%, basically by acting on the windows. The case study was a newly built social housing building of a closed block type located in Seville (Spain. Its constructive techniques and the insulation level of its envelope are standardized for current buildings widespread across Mediterranean Europe.

  12. A revival of the autoregressive distributed lag model in estimating energy demand relationships

    Energy Technology Data Exchange (ETDEWEB)

    Bentzen, J.; Engsted, T.

    1999-07-01

    The findings in the recent energy economics literature that energy economic variables are non-stationary, have led to an implicit or explicit dismissal of the standard autoregressive distribution lag (ARDL) model in estimating energy demand relationships. However, Pesaran and Shin (1997) show that the ARDL model remains valid when the underlying variables are non-stationary, provided the variables are co-integrated. In this paper we use the ARDL approach to estimate a demand relationship for Danish residential energy consumption, and the ARDL estimates are compared to the estimates obtained using co-integration techniques and error-correction models (ECM's). It turns out that both quantitatively and qualitatively, the ARDL approach and the co-integration/ECM approach give very similar results. (au)

  13. New Building Principles In Consequence Of Legislative Demands For Reduced Energy Consumption In Danish Housing

    DEFF Research Database (Denmark)

    Jessen, Rasmus Zederkof; Brohus, Henrik; Kirkegaard, Poul Henning

    2006-01-01

    The increasing restrictions in coming building codes regarding energy consumption in housing generate a need to rethink the building design as well as the building process. This paper discusses the need to change/challenge the way structures are conceived in order to accommodate new legislative...... demands regarding energy consumption. More often than not sustainable aspects like the need for reduced energy consumption are implemented late in the design process. This paper investigates the affect of incorporating aspects like solar heat gain and energy consumption in the initial concept...

  14. 基于需求响应的用户端负荷动态柔性控制%Dynamic Flexible Control Scheme for User Side Load Based on Demand Response

    Institute of Scientific and Technical Information of China (English)

    徐连连; 李东东; 林顺富; 刘翔; 刘洋

    2016-01-01

    为充分挖掘需求侧资源,提升用户侧与电网侧的互动积极性,在对居民负荷分类的基础上,提出一种基于需求响应的用户端负荷动态柔性控制方案。针对空调、热水器、电动汽车,建立负荷的需求响应(demand response,DR)模型,提出优先级、舒适度、功率相似度3类评价指标,按照实时综合满意度高低执行负荷控制决策。仿真结果证实了该方案的可行性,与已有需求响应控制策略相比,该方案能明显改善电网曲线,节约电能与电费,提升用户满意度,适用于智能小区中家庭用户的推广。%In order to fully exploit the demand side resources and improve the interaction between the user side and the grid side, a dynamic flexible control scheme for user side load based on demand response is proposed. Demand response (DR) models of air conditioners, water heaters and electric vehicles (EVs) are established, and three evaluation indexes, including priority index, comfort index and power similarity index, are introduced to calculate the overall satisfaction in real time. To meet the requirements of DR, a load control scheme is performed in accordance with the real-time overall satisfaction index. Simulation results verify the feasibility of the proposed control scheme. The results show that comparing with the existing demand response control strategy, the proposed scheme can significantly improve the curve of power network, achieve significant saving in electric energy and electricity cost, and enhance customer satisfaction. It is suitable to promote the scheme to home users in intelligent community.

  15. Temperature effects on future energy demand in Sub-Saharan Africa

    Science.gov (United States)

    Shivakumar, Abhishek

    2016-04-01

    Climate change is projected to adversely impact different parts of the world to varying extents. Preliminary studies show that Sub-Saharan Africa is particularly vulnerable to climate change impacts, including changes to precipitation levels and temperatures. This work will analyse the effect of changes in temperature on critical systems such as energy supply and demand. Factors that determine energy demand include income, population, temperature (represented by cooling and heating degree days), and household structures. With many countries in Sub-Saharan Africa projected to experience rapid growth in both income and population levels, this study aims to quantify the amplified effects of these factors - coupled with temperature changes - on energy demand. The temperature effects will be studied across a range of scenarios for each of the factors mentioned above, and identify which of the factors is likely to have the most significant impact on energy demand in Sub-Saharan Africa. Results of this study can help set priorities for decision-makers to enhance the climate resilience of critical infrastructure in Sub-Saharan Africa.

  16. Economic feasibility of a wood biomass energy system under evolving demand

    Directory of Open Access Journals (Sweden)

    Giorgio Guariso

    2016-01-01

    Full Text Available In some European regions, particularly in mountainous areas, the demand for energy is evolving due to the decrease of resident population and the adoption of energy efficiency measures. Such changes are rapid enough to significantly impact on the planning process of wood-to-energy chains that are supposed to work for the following 20–25 years. The paper summarizes a study in an Italian pre-alpine district where some municipality shows a declining resident population together with increasing summer tourism. The planning of conversion plants to exploit the local availability of wood is formulated as a mathematical programming problem that maximizes the economic return of the investment, under time-varying parameters that account for the demand evolution. Such a demand is estimated from current trends, while biomass availability and transport is computed from the local cartography, through standard GIS operations. Altogether, the mixed integer optimization problem has 11 possible plant locations of different sizes and technologies taking their feedstock from about 200 parcels. The problem is solved with a commercial software package and shows that the optimal plan changes if one considers the foreseen evolution of the energy demand. As it always happen in this type of biomass-based plants, while the problem formulation is general and may be applied to other cases, the solution obtained is strongly dependent on local values and thus cannot be extrapolated to different contexts.

  17. Energy shift estimation of demand response activation on domestic refrigerators – A field test study

    DEFF Research Database (Denmark)

    Lakshmanan, Venkatachalam; Gudmand-Høyer, Kristian; Marinelli, Mattia;

    2014-01-01

    This paper presents a method to estimate the amount of energy that can be shifted during demand response (DR) activation on domestic refrigerator. Though there are many methods for DR activation like load reduction, load shifting and onsite generation, the method under study is load shifting. Ele...

  18. Comparing demand and consumption. A realistic energy balance; Abgleich von Bedarf und Verbrauch. Realistische Energiebilanz

    Energy Technology Data Exchange (ETDEWEB)

    Jagnow, Kati [Ingenieurbuero fuer Energieberatung, Braunschweig (Germany); Wolff, Dieter [Ostfalia Hochschule fuer Angewandte Wissenschaften, Braunschweig/Wolfenbuettel (Germany)

    2010-07-01

    The new appendix 1 of DIN V 18599 is to help users of the standard to either establish a realistic energy balance or - optimally - even to be able to match the calculated heat demand to the measured real consumption data. (orig.)

  19. Energy Optimization and Management of Demand Response Interactions in a Smart Campus

    Directory of Open Access Journals (Sweden)

    Antimo Barbato

    2016-05-01

    Full Text Available The proposed framework enables innovative power management in smart campuses, integrating local renewable energy sources, battery banks and controllable loads and supporting Demand Response interactions with the electricity grid operators. The paper describes each system component: the Energy Management System responsible for power usage scheduling, the telecommunication infrastructure in charge of data exchanging and the integrated data repository devoted to information storage. We also discuss the relevant use cases and validate the framework in a few deployed demonstrators.

  20. Modeling of Energy Demand in the Greenhouse Using PSO-GA Hybrid Algorithms

    Directory of Open Access Journals (Sweden)

    Jiaoliao Chen

    2015-01-01

    Full Text Available Modeling of energy demand in agricultural greenhouse is very important to maintain optimum inside environment for plant growth and energy consumption decreasing. This paper deals with the identification parameters for physical model of energy demand in the greenhouse using hybrid particle swarm optimization and genetic algorithms technique (HPSO-GA. HPSO-GA is developed to estimate the indistinct internal parameters of greenhouse energy model, which is built based on thermal balance. Experiments were conducted to measure environment and energy parameters in a cooling greenhouse with surface water source heat pump system, which is located in mid-east China. System identification experiments identify model parameters using HPSO-GA such as inertias and heat transfer constants. The performance of HPSO-GA on the parameter estimation is better than GA and PSO. This algorithm can improve the classification accuracy while speeding up the convergence process and can avoid premature convergence. System identification results prove that HPSO-GA is reliable in solving parameter estimation problems for modeling the energy demand in the greenhouse.

  1. A survey on the energy consumption and demand in a tertiary institution

    Directory of Open Access Journals (Sweden)

    Sunday A. Oke

    2008-05-01

    Full Text Available The need for energy supply, particularly electricity, has been on the increase in the last two decades in developing countries such as Nigeria. Economic and industrial developments have led to this increase in demand for electricity. In universities, much of the electricity consumption is consumed in air conditioning systems, which are used to overcome the indoor thermal discomfort during harsh seasons. An amount of electricity is also consumed by laboratory equipment and machinery used for practical and demonstrations. Thus, if universities are to achieve the goals of teaching, research and community service, then proper management of electricity supplied to the system is needed in view of its limited availability. Since electrical energy in Nigeria is highly subsidised by the government, monitoring and controlling the energy consumption pattern in a university is a major aim in the country. However, there is still a lack of information about electricity end-use consumption in Nigerian universities. This paper presents the results of a walk-through energy audit conducted in a university and recommends means of tackling the problem from the demand end by focusing on the areas of potential savings flagged by the energy audit. It was noted that tackling the problem of energy demand from the users’ end is quite challenging, but it might be the only hope of the school in view of inflexibility of supply.

  2. Regional allocation of biomass to U.S. energy demands under a portfolio of policy scenarios.

    Science.gov (United States)

    Mullins, Kimberley A; Venkatesh, Aranya; Nagengast, Amy L; Kocoloski, Matt

    2014-01-01

    The potential for widespread use of domestically available energy resources, in conjunction with climate change concerns, suggest that biomass may be an essential component of U.S. energy systems in the near future. Cellulosic biomass in particular is anticipated to be used in increasing quantities because of policy efforts, such as federal renewable fuel standards and state renewable portfolio standards. Unfortunately, these independently designed biomass policies do not account for the fact that cellulosic biomass can equally be used for different, competing energy demands. An integrated assessment of multiple feedstocks, energy demands, and system costs is critical for making optimal decisions about a unified biomass energy strategy. This study develops a spatially explicit, best-use framework to optimally allocate cellulosic biomass feedstocks to energy demands in transportation, electricity, and residential heating sectors, while minimizing total system costs and tracking greenhouse gas emissions. Comparing biomass usage across three climate policy scenarios suggests that biomass used for space heating is a low cost emissions reduction option, while biomass for liquid fuel or for electricity becomes attractive only as emissions reduction targets or carbon prices increase. Regardless of the policy approach, study results make a strong case for national and regional coordination in policy design and compliance pathways.

  3. How are investment decisions in the steam coal market affected by demand uncertainty and buyer-side market power?

    Energy Technology Data Exchange (ETDEWEB)

    Paulus, Moritz

    2012-02-15

    During the last decade, China has evolved into the largest consumer by far and one of the largest importers of coal. The main driver for the increase in coal demand in China has been economic growth. Future Chinese growth rates, and therefore coal consumption and coal imports, are highly uncertain, which may affect profitability of new investments of international mining companies. Furthermore, China has actively employed an array of instruments to control coal trade flows in the last years. In this paper, we analyse the potential impact of increased Chinese coal import volatility and of potential exertion of Chinese market power on global mining investment decisions. For this purpose, we develop a multi-stage stochastic equilibrium model which is able to simulate investments under uncertainty and a monopolistic player in addition to a competitive fringe. We find that accounting for Chinese demand uncertainty yields significant costs for investors and also leads to a delay in investments. Additionally, the exertion of Chinese market power further reduces overall investment activity.

  4. Estimating the net electricity energy generation and demand using the ant colony optimization approach. Case of Turkey

    Energy Technology Data Exchange (ETDEWEB)

    Toksari, M. Duran [Engineering Faculty, Industrial Engineering Department, Erciyes University, 38039 Kayseri (Turkey)

    2009-03-15

    This paper presents Turkey's net electricity energy generation and demand based on economic indicators. Forecasting model for electricity energy generation and demand is first proposed by the ant colony optimization (ACO) approach. It is multi-agent system in which the behavior of each ant is inspired by the foraging behavior of real ants to solve optimization problem. Ant colony optimization electricity energy estimation (ACOEEE) model is developed using population, gross domestic product (GDP), import and export. All equations proposed here are linear electricity energy generation and demand (linear{sub A}COEEGE and linear ACOEEDE) and quadratic energy generation and demand (quadratic{sub A}COEEGE and quadratic ACOEEDE). Quadratic models for both generation and demand provided better fit solution due to the fluctuations of the economic indicators. The ACOEEGE and ACOEEDE models indicate Turkey's net electricity energy generation and demand until 2025 according to three scenarios. (author)

  5. Estimating the net electricity energy generation and demand using the ant colony optimization approach: Case of Turkey

    Energy Technology Data Exchange (ETDEWEB)

    Toksari, M. Duran [Engineering Faculty, Industrial Engineering Department, Erciyes University, 38039 Kayseri (Turkey)], E-mail: dtoksari@erciyes.edu.tr

    2009-03-15

    This paper presents Turkey's net electricity energy generation and demand based on economic indicators. Forecasting model for electricity energy generation and demand is first proposed by the ant colony optimization (ACO) approach. It is multi-agent system in which the behavior of each ant is inspired by the foraging behavior of real ants to solve optimization problem. Ant colony optimization electricity energy estimation (ACOEEE) model is developed using population, gross domestic product (GDP), import and export. All equations proposed here are linear electricity energy generation and demand (linear{sub A}COEEGE and linear ACOEEDE) and quadratic energy generation and demand (quadratic{sub A}COEEGE and quadratic ACOEEDE). Quadratic models for both generation and demand provided better fit solution due to the fluctuations of the economic indicators. The ACOEEGE and ACOEEDE models indicate Turkey's net electricity energy generation and demand until 2025 according to three scenarios.

  6. The Warburg effect as an adaptation of cancer cells to rapid fluctuations in energy demand

    Science.gov (United States)

    Epstein, Tamir; Gatenby, Robert A.; Brown, Joel S.

    2017-01-01

    To maintain optimal fitness, a cell must balance the risk of inadequate energy reserve for response to a potentially fatal perturbation against the long-term cost of maintaining high concentrations of ATP to meet occasional spikes in demand. Here we apply a game theoretic approach to address the dynamics of energy production and expenditure in eukaryotic cells. Conventionally, glucose metabolism is viewed as a function of oxygen concentrations in which the more efficient oxidation of glucose to CO2 and H2O produces all or nearly all ATP except under hypoxic conditions when less efficient (2 ATP/ glucose vs. about 36ATP/glucose) anaerobic metabolism of glucose to lactic acid provides an emergency backup. We propose an alternative in which energy production is governed by the complex temporal and spatial dynamics of intracellular ATP demand. In the short term, a cell must provide energy for constant baseline needs but also maintain capacity to rapidly respond to fluxes in demand particularly due to external perturbations on the cell membrane. Similarly, longer-term dynamics require a trade-off between the cost of maintaining high metabolic capacity to meet uncommon spikes in demand versus the risk of unsuccessfully responding to threats or opportunities. Here we develop a model and computationally explore the cell’s optimal mix of glycolytic and oxidative capacity. We find the Warburg effect, high glycolytic metabolism even under normoxic conditions, is represents a metabolic strategy that allow cancer cells to optimally meet energy demands posed by stochastic or fluctuating tumor environments. PMID:28922380

  7. Academic training lectures | The outlook for energy supply and demand | 14 - 16 September

    CERN Document Server

    2015-01-01

    Please note that the next series of Academic Training Lectures will take place on the 14, 15 and 16 September. The lectures will be given by by Chris Llewellyn Smith (Director of Energy Research, University of Oxford, President of SESAME Council). The Outlook for Energy Supply and Demand (1/3) on Monday, 14 September from 11.00 a.m. to 12.00 p.m. https://indico.cern.ch/event/388334/ Can Future Energy Needs be Met Sustainably? (2/3) on Tuesday, 15 September from 4.30 p.m. to 5.30 p.m.  (CERN Colloquium) https://indico.cern.ch/event/388335/ The Outlook for Energy Supply and Demand (3/3) on Wednesday, 16 September from 11.00 a.m to 12.00 p.m. https://indico.cern.ch/event/388336/ at CERN, Main Auditorium, in Building 500-1-001. Description: These lectures will review the challenges facing energy policy, the outlook for different sources of primary energy (fossil and renewable), how energy is used, and prospects for improved energy efficiency. A colloquium ‘Can Future Energy Needs be Met ...

  8. Scenario Formation of Energy Demand and CO2 Emissions for Sustainable China

    Institute of Scientific and Technical Information of China (English)

    Wei Baoren; Yagita Hiroshi

    2008-01-01

    Co-integration theory has been employed in this paper and Granger causes are found between urbanization rate and GDP, between capital stock and GDP. Scenario analysis of GDP is performed using the GDP model established in the paper. The energy consumptions in Germany, Japan and other developed countries are analyzed and compared with the energy consumption in China. Environmental friendly scenario of energy demand and CO2 emissions for sustainable China has been formed based on the results of comparison. Under environmental friendly scenario, the primary energy consumption will be 4.31 billion ton coal equivalence (tee) and CO2 emissions will be 1.854 billion t-c in 2050; energy per capital will be 3.06 tce that is 1.8 times of energy consumed in 2005 in China and 51% of consumed energy per capital in Japan in 2003. In 2050, the energy requirement of unit GDP will be 20% lower than that of Germany in 2003, but will be still 37% higher than that in Japan in 2003. It is certain that to fulfill the environmental friendly Scenario of energy demand and CO 2 emissions is a difficult task and it needs long term efforts of the whole society, not only in production sectors but also in service and household sectors.

  9. Energy efficiency and barriers towards meeting energy demand in industries in Nigeria

    Energy Technology Data Exchange (ETDEWEB)

    Unachukwu, Godwin O.; Zarma, I.H.; Sambo, A.S.

    2010-09-15

    Energy is an important production factor and therefore should be managed in parallel with land, labor and capital. Energy efficient production should be seen as a quick and cheaper source of new energy supply as the cost of providing energy can be several times the cost of saving it. Increasingly energy efficiency is deemed to include not only the physical efficiency of the technical equipment and facilities but also the overall economic efficiency of the energy system.

  10. Implications of the Hidden Spatiotemporal Vulnerability of US Building Energy Demand to Climate Change

    Science.gov (United States)

    Huang, J.; Gurney, K. R.

    2015-12-01

    Energy consumption in US buildings, accounting for 41% of primary energy consumption in 2010, is particularly vulnerable to climate change due to the direct relationship between space heating/cooling and outside temperature. Past assessments of climate change impacts on building energy consumption have neglected spatial variations in the "balance point" temperature and the extremes at smaller spatiotemporal scales, making the implications of local-scale vulnerability incomplete. Here we develop state-specific empirical relationships between building energy consumption and temperature to explore the vulnerability of building energy supply and demand under climate change. We find increases in summertime electricity demand exceeding 20% and decreases in wintertime non-electric energy demand of more than 30% in some states by the end of the century. When examined annually at the national scale, these extremes are hidden by numerical cancellation. The financial implications vary spatially with increases in total net building energy expenditures in some states (as much as 3 billion/year) while in others, costs decline (as much as 1 billion/year). Integrated across the contiguous US, these variations result in a net savings of roughly 1.4 billion/year. However, this must be weighed against the cost of adding electricity generation capacity ranging from 13.9 billion/year to 52.2 billion/year in order to maintain the electricity grid's reliability in summer. These results have wide implications for climate policy, the social cost of carbon and energy supply planning. It also demonstrates the importance of representing the climate change impacts on energy consumption at scales relevant to human decisions and actions.Energy consumption in US buildings, accounting for 41% of primary energy consumption in 2010, is particularly vulnerable to climate change due to the direct relationship between space heating/cooling and outside temperature. Past assessments of climate change

  11. Deployment of Behind-The-Meter Energy Storage for Demand Charge Reduction

    Energy Technology Data Exchange (ETDEWEB)

    Neubauer, J. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Simpson, M. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2015-01-01

    This study investigates how economically motivated customers will use energy storage for demand charge reduction, as well as how this changes in the presence of on-site photovoltaic power generation, to investigate the possible effects of incentivizing increased quantities of behind-the-meter storage. It finds that small, short-duration batteries are most cost effective regardless of solar power levels, serving to reduce short load spikes on the order of 2.5% of peak demand. While profitable to the customer, such action is unlikely to adequately benefit the utility as may be desired, thus highlighting the need for modified utility rate structures or properly structured incentives.

  12. Model documentation report: Industrial sector demand module of the National Energy Modeling System

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-01-01

    This report documents the objectives, analytical approach, and development of the National Energy Modeling System (NEMS) Industrial Demand Model. The report catalogues and describes model assumptions, computational methodology, parameter estimation techniques, and model source code. This document serves three purposes. First, it is a reference document providing a detailed description of the NEMS Industrial Model for model analysts, users, and the public. Second, this report meets the legal requirement of the Energy Information Administration (EIA) to provide adequate documentation in support of its models. Third, it facilitates continuity in model development by providing documentation from which energy analysts can undertake model enhancements, data updates, and parameter refinements as future projects. The NEMS Industrial Demand Model is a dynamic accounting model, bringing together the disparate industries and uses of energy in those industries, and putting them together in an understandable and cohesive framework. The Industrial Model generates mid-term (up to the year 2015) forecasts of industrial sector energy demand as a component of the NEMS integrated forecasting system. From the NEMS system, the Industrial Model receives fuel prices, employment data, and the value of industrial output. Based on the values of these variables, the Industrial Model passes back to the NEMS system estimates of consumption by fuel types.

  13. Model documentation report: Industrial sector demand module of the National Energy Modeling System

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-01-01

    This report documents the objectives, analytical approach, and development of the National Energy Modeling System (NEMS) Industrial Demand Model. The report catalogues and describes model assumptions, computational methodology, parameter estimation techniques, and model source code. This document serves three purposes. First, it is a reference document providing a detailed description of the NEMS Industrial Model for model analysts, users, and the public. Second, this report meets the legal requirement of the Energy Information Administration (EIA) to provide adequate documentation in support of its models. Third, it facilitates continuity in model development by providing documentation from which energy analysts can undertake model enhancements, data updates, and parameter refinements as future projects. The NEMS Industrial Demand Model is a dynamic accounting model, bringing together the disparate industries and uses of energy in those industries, and putting them together in an understandable and cohesive framework. The Industrial Model generates mid-term (up to the year 2015) forecasts of industrial sector energy demand as a component of the NEMS integrated forecasting system. From the NEMS system, the Industrial Model receives fuel prices, employment data, and the value of industrial output. Based on the values of these variables, the Industrial Model passes back to the NEMS system estimates of consumption by fuel types.

  14. The energy demand of fast neuronal network oscillations: insights from brain slice preparations

    Directory of Open Access Journals (Sweden)

    Oliver eKann

    2012-01-01

    Full Text Available Fast neuronal network oscillations in the gamma range (30-100 Hz in the cerebral cortex have been implicated in higher cognitive functions such as sensual perception, working memory, and, perhaps, consciousness. However, little is known about the energy demand of gamma oscillations. This is mainly caused by technical limitations that are associated with simultaneous recordings of neuronal activity and energy metabolism in small neuronal networks and at the level of mitochondria in vivo. Thus recent studies have focused on brain slice preparations to address the energy demand of gamma oscillations in vitro. Here, reports will be summarized and discussed that combined electrophysiological recordings, oxygen sensor microelectrodes and live-cell fluorescence imaging in acutely prepared slices and organotypic slice cultures of the hippocampus from both, mouse and rat. These reports consistently show that gamma oscillations can be reliably induced in hippocampal slice preparations by different pharmacological tools. They suggest that gamma oscillations are associated with high energy demand, requiring both rapid adaptation of oxidative energy metabolism and sufficient supply with oxygen and nutrients. These findings might help to explain the exceptional vulnerability of higher cognitive functions during pathological processes of the brain, such as circulatory disturbances, genetic mitochondrial diseases, and neurodegeneration.

  15. Qualitative Screening Method for Impact Assessment of Uncertain Building Geometry on Thermal Energy Demand Predictions

    Science.gov (United States)

    Wate, P.; Coors, V.; Robinson, D.; Iglesias, M.

    2016-10-01

    Virtual 3D models of cities are now being extensively employed for the estimation of thermal energy demand at varying spatial and temporal scales. Efforts in preparing and management of the datasets required for the simulations have reached an advanced stage. Thus allowing to perform city scale simulations using simplified thermal energy balance models. However, the uncertainty inherent in datasets and the reliability of their data sources are often not given due consideration. Such consideration to the uncertainty problem would need a paradigm shift in simulation practices from a single value assignment to uncertainty characterization followed by assessment of qualitative and quantitative impact on the simulation results. The proposed study establishes a mechanism to handle the uncertainty arising from the building geometry reconstruction process and its possible consequences on the thermal energy demand calculations.

  16. Worldwide transportation/energy demand, 1975-2000. Revised Variflex model projections

    Energy Technology Data Exchange (ETDEWEB)

    Ayres, R.U.; Ayres, L.W.

    1980-03-01

    The salient features of the transportation-energy relationships that characterize the world of 1975 are reviewed, and worldwide (34 countries) long-range transportation demand by mode to the year 2000 is reviewed. A worldwide model is used to estimate future energy demand for transportation. Projections made by the forecasting model indicate that in the year 2000, every region will be more dependent on petroleum for the transportation sector than it was in 1975. This report is intended to highlight certain trends and to suggest areas for further investigation. Forecast methodology and model output are described in detail in the appendices. The report is one of a series addressing transportation energy consumption; it supplants and replaces an earlier version published in October 1978 (ORNL/Sub-78/13536/1).

  17. Worldwide transportation/energy demand, 1975-2000. Revised Variflex model projections

    Energy Technology Data Exchange (ETDEWEB)

    Ayres, R.U.; Ayres, L.W.

    1980-03-01

    The salient features of the transportation-energy relationships that characterize the world of 1975 are reviewed, and worldwide (34 countries) long-range transportation demand by mode to the year 2000 is reviewed. A worldwide model is used to estimate future energy demand for transportation. Projections made by the forecasting model indicate that in the year 2000, every region will be more dependent on petroleum for the transportation sector than it was in 1975. This report is intended to highlight certain trends and to suggest areas for further investigation. Forecast methodology and model output are described in detail in the appendices. The report is one of a series addressing transportation energy consumption; it supplants and replaces an earlier version published in October 1978 (ORNL/Sub-78/13536/1).

  18. Domestic energy supply and demand in southwest Asia and northern Africa: Pt. 3. Alternative energies and research priorities

    Energy Technology Data Exchange (ETDEWEB)

    Tasdemiroglu, E. (Middle East Technical Univ., Ankara (TR). Dept. of Mechanical Engineering)

    1989-01-01

    This paper reviews the alternative energies and research priorities in developing countries, with particular emphasis on Egypt and Sudan in northern Africa, and Bangladesh, Indonesia, Jordan, Pakistan, Syrian A.R. and Yemen A.R. in southwest Asia. In discussing alternative energy sources and technologies, the importance of the utilization of improved stoves is indicated and factors, which have prevented their diffusion, are identified. The role of reforestation programs together with other forestry solutions for regular fuel wood supply are studied in detail. Solar, biogas and wind energy technologies are discussed, and R and D activities in these are reviewed for the countries under review. The paper concludes with a discussion of research issues and priorities for the energy sector. Analysis of energy supply and demand patterns, surveys of indigenous energy sources, sectoral analysis of conservation and efficiency improvements, and development of a selected number of renewable energy technologies are listed among the priorities. (author).

  19. Model documentation report: Industrial sector demand module of the national energy modeling system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-01-01

    This report documents the objectives, analytical approach, and development of the National Energy Modeling System (NEMS) Industrial Demand Model. The report catalogues and describes model assumptions, computational methodology, parameter estimation techniques, and model source code. This document serves three purposes. First, it is a reference document providing a detailed description of the NEMS Industrial Model for model analysts, users, and the public. Second, this report meets the legal requirements of the Energy Information Administration (EIA) to provide adequate documentation in support of its model. Third, it facilitates continuity in model development by providing documentation from which energy analysts can undertake model enhancements, data updates, and parameter refinements as future projects.

  20. Statistical analysis regarding energy supply and demand in the EU and Romania between 1990 and 2014

    Directory of Open Access Journals (Sweden)

    Evelina GRADINARU

    2016-07-01

    Full Text Available Climate changes and mankind’s unlimited needs in term of energy, in opposition with the limited nature of our planet energy sources, impose an all new approach regarding the way in which we produce our energy and how efficient we are using it. The European Union is a world leader in promoting sustainability in this field, and Romania, as part of this multi-state organization, follows the same path. We will see further in this paper the evolution of the main statistical indicators regarding energy, with a particular emphasis on electricity, for both the EU and Romania. The starting point will be primary energy production and demand, continuing with the sources of energy, and finishing with electricity and its relevant indicators regarding production and renewable sources. Finally, the relevant conclusions will be drawn.

  1. Prevalence, side effects and awareness about energy drinks among the female university students in Saudi Arabia

    OpenAIRE

    Rahamathulla, Mohamudha Parveen

    2017-01-01

    Objective: To evaluate the consumption, prevalence, side effects and awareness of energy drinks among female university students in Saudi Arabia. Methods: A quantitative research design was implied with sample size of 358 female students, recruited from Prince Sattam bin Abdulaziz University. The data, gathered through self-administered questionnaire, was analyzed through SPSS version 20.0 with p value

  2. The Water Demand of Energy: Implications for Sustainable Energy Policy Development

    Directory of Open Access Journals (Sweden)

    Kaveh Madani

    2013-11-01

    Full Text Available With energy security, climate change mitigation, and sustainable development as three main motives, global energy policies have evolved, now asking for higher shares of renewable energies, shale oil and gas resources in the global energy supply portfolios. Yet, concerns have recently been raised about the environmental impacts of the renewable energy development, supported by many governments around the world. For example, governmental ethanol subsidies and mandates in the U.S. are aimed to increase the biofuel supply while the water footprint of this type of energy might be 70–400 times higher than the water footprint of conventional fossil energy sources. Hydrofracking, as another example, has been recognized as a high water-intensive procedure that impacts the surface and ground water in both quality and quantity. Hence, monitoring the water footprint of the energy mix is significantly important and could have implications for energy policy development. This paper estimates the water footprint of current and projected global energy policies, based on the energy production and consumption scenarios, developed by the International Energy Outlook of the U.S. Energy Information Administration. The outcomes reveal the amount of water required for total energy production in the world will increase by 37%–66% during the next two decades, requiring extensive improvements in water use efficiency of the existing energy production technologies, especially renewables.

  3. Three Essays on National Oil Company Efficiency, Energy Demand and Transportation

    Science.gov (United States)

    Eller, Stacy L.

    This dissertation is composed of three separate essays in the field of energy economics. In the first paper, both data envelopment analysis and stochastic production frontier estimation are employed to provide empirical evidence on the revenue efficiency of national oil companies (NOCs) and private international oil companies (IOCs). Using a panel of 80 oil producing firms, the analysis suggests that NOCs are generally less efficient at generating revenue from a given resource base than IOCs, with some exceptions. Due to differing firm objectives, however, structural and institutional features may help explain much of the inefficiency. The second paper analyzes the relationship between economic development and the demand for energy. Energy consumption is modeled using panel data from 1990 to 2004 for 50 countries spanning all levels of development. We find the relationship between energy consumption and economic development corresponds to the structure of aggregate output and the nature of derived demand for electricity and direct-use fuels in each sector. Notably, the evidence of non-constant income elasticity of demand is much greater for electricity demand than for direct-use fuel consumption. In addition, we show that during periods of rapid economic development, one in which the short-term growth rate exceeds the long-run average, an increase in aggregate output is met by less energy-efficient capital. This is a result of capital being fixed in the short-term. As additional, more efficient capital stock is added to the production process, the short-term increase in energy intensity will diminish. In the third essay, we develop a system of equations to estimate a model of motor vehicle fuel consumption, vehicle miles traveled and implied fuel efficiency for the 67 counties of the State of Florida from 2001 to 2008. This procedure allows us to decompose the factors of fuel demand into elasticities of vehicle driving demand and fuel efficiency. Particular

  4. Oil demand and price elasticity of energy consumption in the GCC countries: A panel cointegration analysis

    Directory of Open Access Journals (Sweden)

    Md Qaiser Alam

    2016-07-01

    Full Text Available This paper examines the cointegrating relationship between oil demand and price elasticity of energy consumption in the Gulf Co-operation Council (GCC countries during the period 1980-2010. The paper has applied the recently developed panel cointegration techniques, Dynamic Ordinary Least Squares (DOLS and panel DOLS in a panel of GCC countries. The region is being recognized as the major region of oil production and export in the global economy. In recent times, the region is emerging as a fastest growing oil consuming region globally. This fast increase in the level of oil consumption in the major oil exporting countries raises the energy security implications in the sphere of the growing oil demand in the world economy. This is likely to bring many pitfalls in the form of price distortions and reduced growth rates in and outside the oil export region. The empirical finding reveals a cointegrating relationship among the variables and indicates an income elastic and price inelastic demand for oil in the long-run in the GCC countries. The outcomes of income elastic and price inelastic demand for oil are also consistent in the short-run. The income and price inelastic demand for oil though exists for a full panel of countries but vary across the GCC countries. The result of the Granger Causality test also depicts a unidirectional causality running from income to oil consumption and bidirectional causality running between oil prices and income in the GCC countries. Moreover, the outcomes reveal that demand for oil varies positively with the growth of income and negatively with the price level in the economy.

  5. Sizing the cannabis market: a demand-side and user-specific approach in seven European countries.

    Science.gov (United States)

    van Laar, Margriet; Frijns, Tom; Trautmann, Franz; Lombi, Linda

    2013-06-01

    Demand-based estimates of total cannabis consumption rarely consider differences among different user types and variation across countries. To describe cannabis consumption patterns and estimate annual consumption for different user types across EU Member States, a web survey in Bulgaria, Czech Republic, Italy, the Netherlands, Portugal, Sweden and United Kingdom (England & Wales) collected data on cannabis use patterns from 3,922 persons who had consumed cannabis at least once in the past year. They were classified into four groups based on their number of use days in the past 12 months: infrequent users or chippers (users (11-50 days), regular users (51-250 days) and intensive users (>250 days). User type specific data on typical amounts consumed were matched with data on numbers of users per user type estimated from existing population surveys, taking differences in mode of consumption, age and gender into account. Estimates were supplemented with data from populations of problem users to compensate for under coverage. Results showed remarkably consistent differences among user groups across countries. Both the average number of units consumed per typical use day and the average amount of cannabis consumed per unit increased across user types of increasing frequency of use. In all countries except Portugal, intensive users formed the smallest group of cannabis users but were responsible for the largest part of total annual cannabis consumption. Annual cannabis consumption varied across countries but confidence intervals were wide. Results are compared with previous estimates and discussed in the context of improving estimation methods.

  6. Managing energy demand through transport policy. What can South Africa learn from Europe?

    Energy Technology Data Exchange (ETDEWEB)

    Vanderschuren, Marianne [Centre for Transport Studies, Faculty of Engineering and the Built Environment, University of Cape Town, Private Bag, 7701 Rondebosch (South Africa); Lane, T.E. [Centre for Transport Studies, University of Cape Town (South Africa); Korver, W. [Goudappel Coffeng BV (Netherlands)

    2010-02-15

    For years, the world has enjoyed the luxury of inexpensive transport fuels, resulting in the continuous expansion of transport demand and vast improvements in mobility levels. The threat of peak oil and other environmental concerns, however, are forcing a paradigm shift in terms of transport planning. In recent times, many developed nations have been investigating alternative ways and means of weaning themselves off oil as the main transport energy source and managing transport energy demand. South Africa is a developing nation that, in terms of transportation technology and policy, lags behind developed countries. This presents South Africa with the opportunity to learn from other countries' triumphs and mistakes and to skip over obsolete investment patterns and in effective policy. It needs to be determined what South Africa can do to bend the stream of continuously growing transport (energy) demand, without hampering growth in mobility. Solutions can potentially be found by looking at the European Union's past and present situation and responses. This paper summarises various European energy management transport policies. These policies are translated into a South African context - pros, cons and implementation viability are identified. (author)

  7. Managing energy demand through transport policy: What can South Africa learn from Europe?

    Energy Technology Data Exchange (ETDEWEB)

    Vanderschuren, Marianne, E-mail: marianne.vanderschuren@uct.ac.z [Centre for Transport Studies, Faculty of Engineering and the Built Environment, University of Cape Town, Private Bag, 7701 Rondebosch (South Africa); Lane, T.E., E-mail: lane.tanya@gmail.co [Centre for Transport Studies, University of Cape Town (South Africa); Korver, W., E-mail: WKorver@goudappel.n [Goudappel Coffeng BV (Netherlands)

    2010-02-15

    For years, the world has enjoyed the luxury of inexpensive transport fuels, resulting in the continuous expansion of transport demand and vast improvements in mobility levels. The threat of peak oil and other environmental concerns, however, are forcing a paradigm shift in terms of transport planning. In recent times, many developed nations have been investigating alternative ways and means of weaning themselves off oil as the main transport energy source and managing transport energy demand. South Africa is a developing nation that, in terms of transportation technology and policy, lags behind developed countries. This presents South Africa with the opportunity to learn from other countries' triumphs and mistakes and to skip over obsolete investment patterns and ineffective policy. It needs to be determined what South Africa can do to bend the stream of continuously growing transport (energy) demand, without hampering growth in mobility. Solutions can potentially be found by looking at the European Union's past and present situation and responses. This paper summarises various European energy management transport policies. These policies are translated into a South African context-pros, cons and implementation viability are identified.

  8. Industrial power monitoring and control : Power management system helps plant reduce energy demand

    Energy Technology Data Exchange (ETDEWEB)

    Crossley, L.E. [E2MS Inc., Whitby, ON (Canada); Demysh, M. [Diversa Cast Technologies, Guelph, ON (Canada)

    2001-05-01

    A power management system, consisting of a real time demand management system designed to allow managers to reduce operating costs via the automatic control of plant furnace loads with interference to production kept to a minimum, was installed at Diversa Cast Technologies in Guelph, Ontario. Diversa Cast Technologies manufactures aluminium, gray and ductile iron automotive lost foam castings. The potential load at the plant is approximately 5000 kW, and comprises two coreless induction melters and supporting equipment. Used for iron batch melting in the off peak hours between 2300 hours and 0700 hours, the first melter is rated at 2750 kW with 8000 lbs capacity. The aluminium heal melting during the on peak hours is handled by the second melter rated at 1250 kW with a 2700 lbs capacity. The electric utility operates on a time-of-use basis which includes penalties for on-peak demand. The installation of the system is described, along with its operation. The software comprises a number of modules to control all the necessary functions associated with data acquisition and analysis. The modules include: communications module, display module, analysis module, report module, database filer, and a system and cost configuration module. Commissioned in February 2000, the system has operated for approximately two months. After the initial period of two weeks where the system was in a monitoring mode to determine the baseline of energy demand and consumption, the demand control was activated. The numerous advantages of the system include better efficiency in the way energy is used, a reduction in the power factor penalties, power factor savings. The payback for this system is less than 8 months. The overall demand was lowered, the productivity improved along with the energy consumption efficiency. 4 figs.

  9. Model documentation report: Commercial Sector Demand Module of the National Energy Modeling System

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-01-01

    This report documents the objectives, analytical approach and development of the National Energy Modeling System (NEMS) Commercial Sector Demand Module. The report catalogues and describes the model assumptions, computational methodology, parameter estimation techniques, model source code, and forecast results generated through the synthesis and scenario development based on these components. The NEMS Commercial Sector Demand Module is a simulation tool based upon economic and engineering relationships that models commercial sector energy demands at the nine Census Division level of detail for eleven distinct categories of commercial buildings. Commercial equipment selections are performed for the major fuels of electricity, natural gas, and distillate fuel, for the major services of space heating, space cooling, water heating, ventilation, cooking, refrigeration, and lighting. The algorithm also models demand for the minor fuels of residual oil, liquefied petroleum gas, steam coal, motor gasoline, and kerosene, the renewable fuel sources of wood and municipal solid waste, and the minor services of office equipment. Section 2 of this report discusses the purpose of the model, detailing its objectives, primary input and output quantities, and the relationship of the Commercial Module to the other modules of the NEMS system. Section 3 of the report describes the rationale behind the model design, providing insights into further assumptions utilized in the model development process to this point. Section 3 also reviews alternative commercial sector modeling methodologies drawn from existing literature, providing a comparison to the chosen approach. Section 4 details the model structure, using graphics and text to illustrate model flows and key computations.

  10. Using high frequency consumption data to identify demand response potential for solar energy integration

    Science.gov (United States)

    Jin, L.; Borgeson, S.; Fredman, D.; Hans, L.; Spurlock, A.; Todd, A.

    2015-12-01

    California's renewable portfolio standard (2012) requires the state to get 33% of its electricity from renewable sources by 2020. Increased share of variable renewable sources such as solar and wind in the California electricity system may require more grid flexibility to insure reliable power services. Such grid flexibility can be potentially provided by changes in end use electricity consumptions in response to grid conditions (demand-response). In the solar case, residential consumption in the late afternoon can be used as reserve capacity to balance the drop in solar generation. This study presents our initial attempt to identify, from a behavior perspective, residential demand response potentials in relation to solar ramp events using a data-driven approach. Based on hourly residential energy consumption data, we derive representative daily load shapes focusing on discretionary consumption with an innovative clustering analysis technique. We aggregate the representative load shapes into behavior groups in terms of the timing and rhythm of energy use in the context of solar ramp events. Households of different behavior groups that are active during hours with high solar ramp rates are identified for capturing demand response potential. Insights into the nature and predictability of response to demand-response programs are provided.

  11. Modeling, Simulations and Analysis of a Demand-Side Management Pilot Project : A collaboration together with Vattenfall R&D

    OpenAIRE

    Viberg, Elin

    2016-01-01

    The increasing number of renewable power sources gives positive outcomes to a more sustainable society. This change does not come without problems, since the power supply from renewable energy sources is intermittent. This leads to uncertainty to keep the balance between production and consumption. One solution could be to make the end-users adapt their consumption to the production. Vattenfall has encountered this problem with a project called Smart Customer Gotland. The purpose of the proje...

  12. Multiple policies to enhance prescribing efficiency for established medicines in Europe with a particular focus on demand-side measures: findings and future implications

    Directory of Open Access Journals (Sweden)

    Brian eGodman

    2014-06-01

    Full Text Available Introduction: The appreciable growth in pharmaceutical expenditure has resulted in multiple initiatives across Europe to lower generic prices and enhance their utilisation. However, considerable variation in their use and prices. Objective: Assess the influence of multiple supply and demand-side initiatives across Europe for established medicines to enhance prescribing efficiency before a decision to prescribe a particular medicine. Subsequently utilise the findings to suggest potential future initiatives that countries could consider. Method: Analysis of different methodologies involving cross national and single country retrospective observational studies on reimbursed use and expenditure of PPIs, statins and renin-angiotensin inhibitor drugs among European countries. Results: Nature and intensity of the various initiatives appreciably influenced prescribing behaviour and expenditure, e.g. multiple measures resulted in reimbursed expenditure for PPIs in Scotland in 2010 56% below 2001 levels despite a 3 fold increase in utilisation and in the Netherlands, PPI expenditure fell by 58% in 2010 vs. 2000 despite a 3-fold increase in utilisation. A similarly picture was seen with prescribing restrictions, i.e. (i more aggressive follow-up of prescribing restrictions for patented statins and ARBs resulted in a greater reduction in the utilisation of patented statins in Austria vs. Norway and lower utilisation of patented ARBs vs. generic ACEIs in Croatia than Austria. However, limited impact of restrictions on esomeprazole in Norway with the first prescription or recommendation in hospital where restrictions do not apply. Similar findings when generic losartan became available in Western Europe. Conclusions: Multiple demand-side measures are needed to influence prescribing patterns. When combined with supply-side measures, activities can realise appreciable savings. Health authorities cannot rely on a ‘spill over’ effect between classes to affect

  13. Multiple policies to enhance prescribing efficiency for established medicines in Europe with a particular focus on demand-side measures: findings and future implications

    Science.gov (United States)

    Godman, Brian; Wettermark, Bjorn; van Woerkom, Menno; Fraeyman, Jessica; Alvarez-Madrazo, Samantha; Berg, Christian; Bishop, Iain; Bucsics, Anna; Campbell, Stephen; Finlayson, Alexander E.; Fürst, Jurij; Garuoliene, Kristina; Herholz, Harald; Kalaba, Marija; Laius, Ott; Piessnegger, Jutta; Sermet, Catherine; Schwabe, Ulrich; Vlahović-Palčevski, Vera V.; Markovic-Pekovic, Vanda; Vončina, Luka; Malinowska, Kamila; Zara, Corinne; Gustafsson, Lars L.

    2014-01-01

    Introduction: The appreciable growth in pharmaceutical expenditure has resulted in multiple initiatives across Europe to lower generic prices and enhance their utilization. However, considerable variation in their use and prices. Objective: Assess the influence of multiple supply and demand-side initiatives across Europe for established medicines to enhance prescribing efficiency before a decision to prescribe a particular medicine. Subsequently utilize the findings to suggest potential future initiatives that countries could consider. Method: An analysis of different methodologies involving cross national and single country retrospective observational studies on reimbursed use and expenditure of PPIs, statins, and renin-angiotensin inhibitor drugs among European countries. Results: Nature and intensity of the various initiatives appreciably influenced prescribing behavior and expenditure, e.g., multiple measures resulted in reimbursed expenditure for PPIs in Scotland in 2010 56% below 2001 levels despite a 3-fold increase in utilization and in the Netherlands, PPI expenditure fell by 58% in 2010 vs. 2000 despite a 3-fold increase in utilization. A similar picture was seen with prescribing restrictions, i.e., (i) more aggressive follow-up of prescribing restrictions for patented statins and ARBs resulted in a greater reduction in the utilization of patented statins in Austria vs. Norway and lower utilization of patented ARBs vs. generic ACEIs in Croatia than Austria. However, limited impact of restrictions on esomeprazole in Norway with the first prescription or recommendation in hospital where restrictions do not apply. Similar findings when generic losartan became available in Western Europe. Conclusions: Multiple demand-side measures are needed to influence prescribing patterns. When combined with supply-side measures, activities can realize appreciable savings. Health authorities cannot rely on a “spill over” effect between classes to affect changes in

  14. Optimization of a polygeneration system for energy demands of a livestock farm

    Directory of Open Access Journals (Sweden)

    Mančić Marko V.

    2016-01-01

    Full Text Available A polygeneration system is an energy system capable of providing multiple utility outputs to meet local demands by application of process integration. This paper addresses the problem of pinpointing the optimal polygeneration energy supply system for the local energy demands of a livestock farm in terms of optimal system configuration and optimal system capacity. The optimization problem is presented and solved for a case study of a pig farm in the paper. Energy demands of the farm, as well as the super-structure of the polygeneration system were modelled using TRNSYS software. Based on the locally available resources, the following polygeneration modules were chosen for the case study analysis: a biogas fired internal combustion engine co-generation module, a gas boiler, a chiller, a ground water source heat pump, solar thermal collectors, photovoltaic collectors, and heat and cold storage. Capacities of the polygeneration modules were used as optimization variables for the TRNSYS-GenOpt optimization, whereas net present value, system primary energy consumption, and CO2 emissions were used as goal functions for optimization. A hybrid system composed of biogas fired internal combustion engine based co-generation system, adsorption chiller solar thermal and photovoltaic collectors, and heat storage is found to be the best option. Optimal heating capacity of the biogas co-generation and adsorption units was found equal to the design loads, whereas the optimal surface of the solar thermal array is equal to the south office roof area, and the optimal surface of the PV array corresponds to the south facing animal housing building rooftop area. [Projekat Ministarstva nauke Republike Srbije, br. III 42006: Research and development of energy and environmentally highly effective polygeneration systems based on using renewable energy sources

  15. Analysis of Changes in Energy Consumption and Demand Trend in China’s Agricultural Production

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    China’s energy consumption for agricultural production has relied on petroleum and coal with relatively low input from power and other types of energy for a long time.Projections indicate that as China’s existing development trend leads to substantial growth of energy demand for agricultural production,such a long term irrational energy consumption pattern would unlikely be able to meet the needs of the country’s developing agricultural sector.As such,it is recommended that China’s agricultural sector should follow the national energy development strategy guideline by gradually increasing the use of wind power,solar energy,biomass and other new energy sources while advancing technological innovations on traditional energy sources.Meanwhile,as the consumption structure of three major energy sources(i.e.petroleum,coal,and power)is optimized,development and application of biomass from agriculture as raw materials for alternative energy should be enhanced.Lastly,the development and application of wind power,solar energy,and hydropower in agricultural production should be increased in areas where appropriate.

  16. Development of an expert system in econometrics. Application to energy demand modelling; Construction d`un systeme expert en econometrie. Application a la demande d`energie

    Energy Technology Data Exchange (ETDEWEB)

    Fauveau, A.

    1993-05-03

    The proper use of econometric softwares requires both statistical and economic skills. The main objective of this thesis is to provide the users of regression programs with assistance in the process of regression analysis by means of expert system technology. We first built an expert system providing general econometric strategy. The running principle of the program is based on a ``estimation - hypothesis check - specification improvement`` cycle. Its econometric expertise is a consistent set of statistical technics and analysis rules for estimating one equation. Then, we considered the inclusion of the economic knowledge required to produce a consistent analysis; we focused on energy demand modelling. The economic knowledge base is independent from the econometric rules, this allow us to update it easily. (author).

  17. Distributed generation and demand response dispatch for a virtual power player energy and reserve provision

    DEFF Research Database (Denmark)

    Faria, Pedro; Soares, Tiago; Vale, Zita

    2014-01-01

    operators, utilities and consumers must adopt strategies and methods to take full advantage of demand response and distributed generation. This requires that all the involved players consider all the market opportunities, as the case of energy and reserve components of electricity markets. The present paper...... proposes a methodology which considers the joint dispatch of demand response and distributed generation in the context of a distribution network operated by a virtual power player. The resources’ participation can be performed in both energy and reserve contexts. This methodology contemplates...... the probability of actually using the reserve and the distribution network constraints. Its application is illustrated in this paper using a 32-bus distribution network with 66 DG units and 218 consumers classified into 6 types of consumers....

  18. Energy demands of diverse spiking cells from the neocortex, hippocampus and thalamus.

    Directory of Open Access Journals (Sweden)

    Abdelmalik eMoujahid

    2014-04-01

    Full Text Available It has long been known that neurons in the brain are not physiologically homogeneous. In response to current stimulus, they can fire several distinct patterns of action potentials that are associated with different physiological classes ranging from regular-spiking cells, fast-spiking cells, intrinsically bursting cells, and low-threshold cells. In this work we show that the high degree of variability in firing characteristics of action potentials among these cells is accompanied with a significant variability in the energy demands required to restore the concentration gradients after an action potential.The values of the metabolic energy were calculated for a wide range of cell temperatures and stimulus intensities following two different approaches. The first one is based on the amount of Na$^+$ load crossing the membrane during a single action potential, while the second one focuses on the electrochemical energy functions deduced from the dynamics of the computational neuron models. The results show that the thalamocortical relay neuron is the most energy-efficient cell consuming between 7 to 18 nJ/cm$^2$ for each spike generated, while both the regular and fast spiking cells from somatosensory cortex and the intrinsically-bursting cell from a cat visual cortex are the least energy-efficient, and can consume up to 100 nJ/cm$^2$ per spike. The lowest values of these energy demands were achieved at higher temperatures and high external stimuli.

  19. A policy study on energy supply and demand of several countries (China, Indonesia, Mexico)

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Byung Ryeal [Korea Energy Economics Institute, Euiwang (Korea)

    1999-03-01

    Korea is depending 97% of primary energy consumption on imports. To have a stable supply of energy required for a continuous growth, it is recommended to utilize international energy market actively for short-term while it is required to reinforce resources diplomacy with other countries with full of resources for mid- and long-term. This study reviewed energy supply and demand and major policies of China, Indonesia and Mexico, which give direct or indirect influence on energy supply and demand of Korea. With the geographical adjacency, Korea imports coal from China and exports petroleum products to China. Furthermore, it is very likely to have a trade related to nuclear power plant and natural gas. Indonesia exports coal, crude oil, and LNG to Korea. Especially LNG is occupied 60% of total amount of imports. It is expected to get help from Mexico because there are many similar aspects between Mexico and Korea such as GNP or a conservative idea on energy industry. (author). 49 refs., 6 figs., 42 tabs.

  20. Correlations between Energy and Displacement Demands for Performance-Based Seismic Engineering

    Science.gov (United States)

    Mollaioli, Fabrizio; Bruno, Silvia; Decanini, Luis; Saragoni, Rodolfo

    2011-01-01

    The development of a scientific framework for performance-based seismic engineering requires, among other steps, the evaluation of ground motion intensity measures at a site and the characterization of their relationship with suitable engineering demand parameters (EDPs) which describe the performance of a structure. In order to be able to predict the damage resulting from earthquake ground motions in a structural system, it is first necessary to properly identify ground motion parameters that are well correlated with structural response and, in turn, with damage. Since structural damage during an earthquake ground motion may be due to excessive deformation or to cumulative cyclic damage, reliable methods for estimating displacement demands on structures are needed. Even though the seismic performance is directly related to the global and local deformations of the structure, energy-based methodologies appear more helpful in concept, as they permit a rational assessment of the energy absorption and dissipation mechanisms that can be effectively accomplished to balance the energy imparted to the structure. Moreover, energy-based parameters are directly related to cycles of response of the structure and, therefore, they can implicitly capture the effect of ground motion duration, which is ignored by conventional spectral parameters. Therefore, the identification of reliable relationships between energy and displacement demands represents a fundamental issue in both the development of more reliable seismic code provisions and the evaluation of seismic vulnerability aimed at the upgrading of existing hazardous facilities. As these two aspects could become consistently integrated within a performance-based seismic design methodology, understanding how input and dissipated energy are correlated with displacement demands emerges as a decisive prerequisite. The aim of the present study is the establishment of functional relationships between input and dissipated energy

  1. Prevalence, side effects and awareness about energy drinks among the female university students in Saudi Arabia.

    Science.gov (United States)

    Rahamathulla, Mohamudha Parveen

    2017-01-01

    To evaluate the consumption, prevalence, side effects and awareness of energy drinks among female university students in Saudi Arabia. A quantitative research design was implied with sample size of 358 female students, recruited from Prince Sattam bin Abdulaziz University. The data, gathered through self-administered questionnaire, was analyzed through SPSS version 20.0 with p value Sattam bin Abdulaziz have reported to consume energy drinks regularly with several adverse effects. The government of Saudi Arabia should take serious initiatives towards organizing effective awareness programs specifically in universities and colleges to control the consumption of energy drinks and educate on the adverse effects.

  2. Water flows, energy demand, and market analysis of the informal water sector in Kisumu, Kenya.

    Science.gov (United States)

    Sima, Laura C; Kelner-Levine, Evan; Eckelman, Matthew J; McCarty, Kathleen M; Elimelech, Menachem

    2013-03-01

    In rapidly growing urban areas of developing countries, infrastructure has not been able to cope with population growth. Informal water businesses fulfill unmet water supply needs, yet little is understood about this sector. This paper presents data gathered from quantitative interviews with informal water business operators (n=260) in Kisumu, Kenya, collected during the dry season. Sales volume, location, resource use, and cost were analyzed by using material flow accounting and spatial analysis tools. Estimates show that over 76% of the city's water is consumed by less than 10% of the population who have water piped into their dwellings. The remainder of the population relies on a combination of water sources, including water purchased directly from kiosks (1.5 million m(3) per day) and delivered by hand-drawn water-carts (0.75 million m(3) per day). Energy audits were performed to compare energy use among various water sources in the city. Water delivery by truck is the highest per cubic meter energy demand (35 MJ/m(3)), while the city's tap water has the highest energy use overall (21,000 MJ/day). We group kiosks by neighborhood and compare sales volume and cost with neighborhood-level population data. Contrary to popular belief, we do not find evidence of price gouging; the lowest prices are charged in the highest-demand low-income area. We also see that the informal sector is sensitive to demand, as the number of private boreholes that serve as community water collection points are much larger where demand is greatest.

  3. Comfort filters in a total energy demand optimization method for the passive design of a building

    OpenAIRE

    2015-01-01

    The effective design of sustainable buildings results from an accurate optimization process of all the interrelated variables. The authors developed a replicable methodology for the optimization of the building envelope design. Following a previous work, where in the pre-processing and the optimization phases the minimization of the total energy demand is performed by coupling TRNSYS® with GenOpt®, this paper is focused on the post-processing phase of the methodology, in which the results are...

  4. Peak Power Demand and Energy Consumption Reduction Strategies for Trains under Moving Block Signalling System

    Directory of Open Access Journals (Sweden)

    Qing Gu

    2013-01-01

    Full Text Available In the moving block signalling (MBS system where the tracking target point of the following train is moving forward with its leading train, overload of the substations occurs when a dense queue of trains starts (or restarts in very close distance interval. This is the peak power demand problem. Several methods have been attempted in the literature to deal with this problem through changing train’s operation strategies. However, most existing approaches reduce the service quality. In this paper, two novel approaches—“Service Headway Braking” (SHB and “Extending Stopping Distance Interval” (ESDI—are proposed according to available and unavailable extra station dwell times, respectively. In these two methods, the restarting times of the trains are staggered and traction periods are reduced, which lead to the reduction of peak power demand and energy consumption. Energy efficient control switching points are seen as the decision parameters. Nonlinear programming method is used to model the process. Simulation results indicate that, compared with ARL, peak power demands are reduced by 40% and 20% by applying SHB and ESDI without any arrival time delay, respectively. At the same time, energy consumptions are also reduced by 77% and 50% by applying SHB and ESDI, respectively.

  5. Time-motion analysis of acceleration demands of 4v4 small-sided soccer games played on different pitch sizes.

    Science.gov (United States)

    Hodgson, Craig; Akenhead, Richard; Thomas, Kevin

    2014-02-01

    We aimed to quantify the time-motion characteristics and technical demands of small-sided soccer games (SSGs) played on small, medium and large pitches using a high frequency non-differential global positioning system (NdGPS) that allowed assessment of acceleration and deceleration patterns. Eight male soccer players competed in SSGs comprising 4×4min quarters (3min recovery) on small (30×20m) medium (40×30m) and large (50×40m) pitch sizes. Time motion analysis using a NdGPS positioning system quantified distance covered sprinting (⩾6.7ms(-1)), high speed running (⩾5.8ms(-1)) and low (1-2ms(-2)), medium (2-3ms(-2)) and high (>3ms(-2)) acceleration. The frequency of common technical actions (passing, turning, dribbling, shooting, tackling, heading and interceptions) was performed using a hand notation system. SSGs played on medium and large pitches had a greater physical demand than on small pitches, with significantly more distance covered in all movement categories. Total distance covered in acceleration categories ranged from 230±111 (small pitch) to 356±72m (medium pitch). The small pitch imposed a greater technical demand on players (more passes, shots and tackles) compared to medium and large pitches. The study provides novel data demonstrating the acceleration patterns observed in SSGs are relatively greater than those observed during professional match play. Thus SSGs might offer a "density" type conditioning stimulus. Practitioners should be aware that changes in pitch size impact both the physical and technical demands of SSGs. Copyright © 2013 Elsevier B.V. All rights reserved.

  6. A Successful Case Study of Small Business Energy Efficiency and Demand Response with Communicating Thermostats

    Energy Technology Data Exchange (ETDEWEB)

    Herter, Karen; Wayland, Seth; Rasin, Josh

    2009-08-12

    This report documents a field study of 78 small commercial customers in the Sacramento Municipal Utility District service territory who volunteered for an integrated energy-efficiency/demand-response (EE-DR) program in the summer of 2008. The original objective for the pilot was to provide a better understanding of demand response issues in the small commercial sector. Early findings justified a focus on offering small businesses (1) help with the energy efficiency of their buildings in exchange for occasional load shed, and (2) a portfolio of options to meet the needs of a diverse customer sector. To meet these expressed needs, the research pilot provided on-site energy efficiency advice and offered participants several program options, including the choice of either a dynamic rate or monthly payment for air-conditioning setpoint control. Overall results show that pilot participants had energy savings of 20%, and the potential for an additional 14% to 20% load drop during a 100 F demand response event. In addition to the efficiency-related bill savings, participants on the dynamic rate saved an estimated 5% on their energy costs compared to the standard rate. About 80% of participants said that the program met or surpassed their expectations, and three-quarters said they would probably or definitely participate again without the $120 participation incentive. These results provide evidence that energy efficiency programs, dynamic rates and load control programs can be used concurrently and effectively in the small business sector, and that communicating thermostats are a reliable tool for providing air-conditioning load shed and enhancing the ability of customers on dynamic rates to respond to intermittent price events.

  7. Demand Response With Micro-CHP Systems

    NARCIS (Netherlands)

    Houwing, M.; Negenborn, R.R.; De Schutter, B.

    2011-01-01

    With the increasing application of distributed energy resources and novel information technologies in the electricity infrastructure, innovative possibilities to incorporate the demand side more actively in power system operation are enabled. A promising, controllable, residential distributed

  8. Demand Response With Micro-CHP Systems

    NARCIS (Netherlands)

    Houwing, M.; Negenborn, R.R.; De Schutter, B.

    2011-01-01

    With the increasing application of distributed energy resources and novel information technologies in the electricity infrastructure, innovative possibilities to incorporate the demand side more actively in power system operation are enabled. A promising, controllable, residential distributed genera

  9. Creating hourly distributions at national level for various energy demands and renewable energy supplies

    DEFF Research Database (Denmark)

    Connolly, David; Drysdale, Dave; Hansen, Kenneth

    2015-01-01

    includes wind, solar (photovoltaic and thermal), and wave power. Distributions are not created for dispatchable plants, such as coal, gas, and nuclear thermal plants, since their output is usually determined by the energy modelling tool rather than by a dependent resource. The methodologies are purposely......In the future, intermittent renewables will provide much larger shares of the primary energy supply compared to today, so accommodating their fluctuations is a key challenge for future energy systems. Many researchers use computer modelling to investigate this challenge, by simulating how...... the energy system will behave with increasing amounts of intermittent renewable energy. To assess this challenge, short-term time steps at an hourly scale are often necessary. Without this, the variations in renewable energy production will be missed, since their production can increase and decrease without...

  10. THERMOCHEMICAL ENERGY STORAGE FOR SEASONAL BALANCE OF SURPLUS ELECTRICITY AND HEAT DEMAND IN DOMESTIC BUILDINGS

    OpenAIRE

    Schmidt, Matthias; Linder, Marc Philipp

    2016-01-01

    Thermochemical storage systems are predestined to store thermal energy for a long time since the storage principle itself is free of losses and allows for very high energy densities. Therefore we developed a new approach where electricity, p. e. from private PV-panels in the summer, is used to charge a thermochemical reaction system. The reaction product then can be stored in an inexpensive tank at room temperature. If there is heat demand during the winter part of the material can be supplie...

  11. Incremental cost of increasing access to maternal health care services: perspectives from a demand and supply side intervention in Eastern Uganda.

    Science.gov (United States)

    Mayora, Chrispus; Ekirapa-Kiracho, Elizabeth; Bishai, David; Peters, David H; Okui, Olico; Baine, Sebastian Olikira

    2014-01-01

    High maternal and infant mortality continue to be major challenges to the attainment of the Millennium Development Goals for many low and middle-income countries. There is now evidence that voucher initiatives can increase access to maternal health services. However, a dearth of knowledge exists on the cost implications of voucher schemes. This paper estimates the incremental costs of a demand and supply side intervention aimed at increasing access to maternal health care services. This costing study was part of a quasi-experimental voucher study conducted in two districts in Eastern Uganda to explore the impact of demand and supply - side incentives on increasing access to maternal health services. The provider's perspective was used and the ingredients approach to costing was employed. Costs were based on market prices as recorded in program records. Total, unit, and incremental costs were calculated. The estimated total financial cost of the intervention for the one year of implementation was US$525,472 (US$1 = 2200UgShs). The major cost drivers included costs for transport vouchers (35.3%), health system strengthening (29.2%) and vouchers for maternal health services (18.2%). The average cost of transport per woman to and from the health facility was US$4.6. The total incremental costs incurred on deliveries (excluding caesarean section) was US$317,157 and US$107,890 for post natal care (PNC). The incremental costs per additional delivery and PNC attendance were US$23.9 and US$7.6 respectively. Subsidizing maternal health care costs through demand and supply - side initiatives may not require significant amounts of resources contrary to what would be expected. With Uganda's Gross Domestic Product (GDP) per capita of US$55` (2012), the incremental cost per additional delivery (US$23.9) represents about 5% of GDP per capita to save a mother and probably her new born. For many low income countries, this may not be affordable, yet reliance on donor funding is often

  12. Model documentation report: Residential sector demand module of the National Energy Modeling System

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-01-01

    This report documents the objectives, analytical approach, and development of the National Energy Modeling System (NEMS) Residential Sector Demand Module. The report catalogues and describes the model assumptions, computational methodology, parameter estimation techniques, and FORTRAN source code. This document serves three purposes. First, it is a reference document that provides a detailed description for energy analysts, other users, and the public. Second, this report meets the legal requirement of the Energy Information Administration (EIA) to provide adequate documentation in support of its statistical and forecast reports according to Public Law 93-275, section 57(b)(1). Third, it facilitates continuity in model development by providing documentation from which energy analysts can undertake model enhancements, data updates, and parameter refinements.

  13. Model documentation report: Residential sector demand module of the National Energy Modeling System

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    This report documents the objectives, analytical approach, and development of the National Energy Modeling System (NEMS) Residential Sector Demand Module. The report catalogues and describes the model assumptions, computational methodology, parameter estimation techniques, and FORTRAN source code. This document serves three purposes. First, it is a reference document providing a detailed description for energy analysts, other users, and the public. Second, this report meets the legal requirement of the Energy Information Administration (EIA) to provide adequate documentation in support of its statistical and forecast reports according to Public Law 93-275, section 57(b)(1). Third, it facilitates continuity in model development by providing documentation from which energy analysts can undertake model enhancements, data updates, and parameter refinements.

  14. How Can China Lighten Up? Urbanization, Industrialization and Energy Demand Scenarios

    Energy Technology Data Exchange (ETDEWEB)

    Aden, Nathaniel T.; Zheng, Nina; Fridley, David G.

    2009-07-01

    Urbanization has re-shaped China's economy, society, and energy system. Between 1990 and 2007 China added 290 million new urban residents, bringing the total urbanization rate to 45%. This population adjustment spurred energy demand for construction of new buildings and infrastructure, as well as additional residential use as rural biomass was replaced with urban commercial energy services. Primary energy demand grew at an average annual rate of 10% between 2000 and 2007. Urbanization's effect on energy demand was compounded by the boom in domestic infrastructure investment, and in the export trade following World Trade Organization (WTO) accession in 2001. Industry energy consumption was most directly affected by this acceleration. Whereas industry comprised 32% of 2007 U.S. energy use, it accounted for 75% of China's 2007 energy consumption. Five sub-sectors accounted for 78% of China's industry energy use in 2007: iron and steel, energy extraction and processing, chemicals, cement, and non-ferrous metals. Ferrous metals alone accounted for 25% of industry and 18% of total primary energy use. The rapid growth of heavy industry has led China to become by far the world's largest producer of steel, cement, aluminum, and other energy-intensive commodities. However, the energy efficiency of heavy industrial production continues to lag world best practice levels. This study uses scenario analysis to quantify the impact of urbanization and trade on industrial and residential energy consumption from 2000 to 2025. The BAU scenario assumed 67% urbanization, frozen export amounts of heavy industrial products, and achievement of world best practices by 2025. The China Lightens Up (CLU) scenario assumed 55% urbanization, zero net exports of heavy industrial products, and more aggressive efficiency improvements by 2025. The five dominant industry sub-sectors were modeled in both scenarios using a LEAP energy end-use accounting model. The results of

  15. Simple models of district heating systems for load and demand side management and operational optimisation; Simple modeller for fjernvarmesystemer med henblik pae belastningsudjaevning og driftsoptimering

    Energy Technology Data Exchange (ETDEWEB)

    Boehm, B. [Technical Univ. of Denmark, Dept. of Mechanical Engineering, Kgs. Lyngby (Denmark); Larsen, H.V. [Risoe National Lab., System Analysis Dept., Roskilde (DK)

    2004-12-01

    The purpose of this research project has been to further develop and test simple (aggregated) models of district heating (DH) systems for simulation and operational optimization, and to investigate the influence of Load Management and Demand Side Management (DMS) on the total operational costs. The work is based on physical-mathematical modelling and simulation of DH systems, and is a continuation of previous EFP-96 work. In the present EFP-2001 project the goals have been to improve the Danish method of aggregation by addressing the problem of aggregation of pressure losses, and to test the methods on a much larger data set than in the EFP-1996 project. In order to verify the models it is crucial to have good data at disposal. Full information on the heat loads and temperatures not only at the DH plant but also at every consumer (building) is needed, and therefore only a few DH systems in Denmark can supply such data. (BA)

  16. Closing data gaps for LCA of food products: estimating the energy demand of food processing.

    Science.gov (United States)

    Sanjuán, Neus; Stoessel, Franziska; Hellweg, Stefanie

    2014-01-21

    Food is one of the most energy and CO2-intensive consumer goods. While environmental data on primary agricultural products are increasingly becoming available, there are large data gaps concerning food processing. Bridging these gaps is important; for example, the food industry can use such data to optimize processes from an environmental perspective, and retailers may use this information for purchasing decisions. Producers and retailers can then market sustainable products and deliver the information demanded by governments and consumers. Finally, consumers are increasingly interested in the environmental information of foods in order to lower their consumption impacts. This study provides estimation tools for the energy demand of a representative set of food process unit operations such as dehydration, evaporation, or pasteurization. These operations are used to manufacture a variety of foods and can be combined, according to the product recipe, to quantify the heat and electricity demand during processing. In combination with inventory data on the production of the primary ingredients, this toolbox will be a basis to perform life cycle assessment studies of a large number of processed food products and to provide decision support to the stakeholders. Furthermore, a case study is performed to illustrate the application of the tools.

  17. What can we learn from North American transport energy demand restraint policies of the 1970s and 1980s and public reactions to them?

    Energy Technology Data Exchange (ETDEWEB)

    Lee-Gosselin, M.E.H. [Ecole Superieure d' Amenagement du territoire et de Developpement regional ESAD and Centre for research on planning and development CRAD, Universite Laval, 1616 Pavillon F-A Savard, Quebec, PQ, G1V 0A6 (Canada)

    2010-05-15

    This paper offers a North American perspective on the possible reaction of the general public to regulatory instruments addressing energy consumption, and by implication, carbon emissions. Its purpose is to reflect on some of the lessons learnt from research on consumer behaviour undertaken by the author and colleagues in the wake of the oil shortages of 1973 (OPEC embargo) and 1979 (interruption of Iranian production). The paper does not, therefore, provide an extensive review of related literature. It first outlines very briefly the policy context of the past 30 years and the classes of transport energy demand restraint policies of the 1970s and 1980s. It then describes some key lessons from our research during those two decades and concludes with some speculation on their relevance to demand-side management that is motivated by concerns over greenhouse gas emissions.

  18. Effectiveness of demand and supply side interventions in promoting institutional deliveries--a quasi-experimental trial from rural north India.

    Science.gov (United States)

    Amudhan, Senthil; Mani, Kalaivani; Rai, Sanjay K; Pandav, Chandrakant S; Krishnan, Anand

    2013-06-01

    We assessed the differential and sequential effects of a Government of India conditional cash transfer scheme for the socio-economically disadvantaged (Janani Suraksha Yojana; JSY) and the strengthening of the primary health centre (PHC) network to provide 24/7 obstetric care in promoting institutional deliveries. This study used 7796 births from the Ballabgarh Health and Demographic Surveillance Site between April 2006 and March 2010 when both schemes were implemented in a staggered manner. The multiple baseline design took advantage of interventions separated by time and geographical zone to compute difference in differences in the rate of institutional deliveries. Logistic regression was used to estimate increases in the odds of institutional deliveries after adjustment for caste and maternal education. Compared with villages with poor access, institutional deliveries nearly doubled among villages with access to 24/7 delivery services; odds ratio (OR) 1.9 [95% confidence interval (CI): 1.3, 2.6]. Introduction of JSY in villages with poor access resulted in a 1.4-fold (95% CI: 1.1, 1.8) increase in institutional deliveries and a 1.1-fold (95% CI: 0.9, 1.4) increase in villages served by PHCs 24/7. However, the introduction of PHC 24/7 care to villages served by JSY doubled the rate of institutional deliveries; OR 2.1 (95% CI: 1.5, 2.8). Among the disadvantaged, institutional deliveries increased by 34.4%, compared with 24.8% among the non-disadvantaged. Introduction of PHC 24/7 care in this group increased institutional deliveries 4-fold; OR 4.2 (95% CI: 1.9, 9.0) compared with 3-fold for JSY alone; OR 3.2 (95% CI: 1.8, 5.6). Both demand and supply side strategies are effective and promote equity. Improving service delivery in a population previously primed by demand side intervention appears to be the most useful.

  19. Automated Demand Response Approaches to Household Energy Management in a Smart Grid Environment

    Science.gov (United States)

    Adika, Christopher Otieno

    The advancement of renewable energy technologies and the deregulation of the electricity market have seen the emergence of Demand response (DR) programs. Demand response is a cost-effective load management strategy which enables the electricity suppliers to maintain the integrity of the power grid during high peak periods, when the customers' electrical load is high. DR programs are designed to influence electricity users to alter their normal consumption patterns by offering them financial incentives. A well designed incentive-based DR scheme that offer competitive electricity pricing structure can result in numerous benefits to all the players in the electricity market. Lower power consumption during peak periods will significantly enhance the robustness of constrained networks by reducing the level of power of generation and transmission infrastructure needed to provide electric service. Therefore, this will ease the pressure of building new power networks as we avoiding costly energy procurements thereby translating into huge financial savings for the power suppliers. Peak load reduction will also reduce the inconveniences suffered by end users as a result of brownouts or blackouts. Demand response will also drastically lower the price peaks associated with wholesale markets. This will in turn reduce the electricity costs and risks for all the players in the energy market. Additionally, DR is environmentally friendly since it enhances the flexibility of the power grid through accommodation of renewable energy resources. Despite its many benefits, DR has not been embraced by most electricity networks. This can be attributed to the fact that the existing programs do not provide enough incentives to the end users and, therefore, most electricity users are not willing to participate in them. To overcome these challenges, most utilities are coming up with innovative strategies that will be more attractive to their customers. Thus, this dissertation presents various

  20. Deregulation of Electricity Market and Drivers of Demand for Electrical Energy in Industry

    Directory of Open Access Journals (Sweden)

    Bojnec Štefan

    2016-09-01

    Full Text Available This paper investigates deregulation of electricity market focusing on electricity prices and drivers of demand for electrical energy in industry in Slovenia. The patterns in evolution of real electricity price developments and the three main components of the electricity price are calculated: liberalized market share for purchased electricity price, regulated infrastructure share for use of electricity network grids and mandatory state charges in the sale of electricity (duty, excise duty and value-added tax. To calculate the real value of electricity prices, producer price index of industrial commodities for electricity prices in industry is used as deflator and implicit deflator of gross domestic product for the size of the economy. In the empirical econometric part is used regression analysis for the amount electricity consumption in the industry depending on the real gross domestic product, direct and cross-price elasticity for natural gas prices in the industry. The results confirmed volatility in real electricity price developments with their increasing tendency and the increasing share of different taxes and state charges in the electricity prices for industry. Demand for electrical energy in industry is positively associated with gross domestic product and price of natural gas as substitute for electrical energy in industry use, and negatively associated with prices of electrical energy for industry.

  1. Understanding energy consumption behaviors in order to adapt demand response measures

    Energy Technology Data Exchange (ETDEWEB)

    Vassileva, Iana; Wallin, Fredrik; Dahlquist, Erik [Malardalen University (Sweden)], email: iana.vassileva@mdh.se, email: fredrik.wallin@mdh.se, email: erik.dahlquist@mdh.se

    2011-07-01

    When new price strategies and other demand-response measures are being established, it is important that amounts of electricity consumed and the potential for consumer participation be given serious consideration. It is important to encourage consumers to use less electricity if sustainable use of energy is to be achieved. Demand-response is a key component of the smart grids concept. So it is vital to get a comprehensive understanding of how different processes and factors influence the end use of energy. This paper presents an in-depth analysis of questionnaire responses from 2000 households in Vaxjo, Sweden. It sheds new light on the energy consumption behaviors of Swedish householders. Since 2008 Vaxjo householder customers have been able to check their own daily electricity consumption and get advice and tips, via a website provided by the local energy company, on how to lower the use of electricity. At the present time, of those responding to the questionnaire, this website is visited more frequently by people who live in houses than in apartments.

  2. Energy demand in solar home systems; Demanda energetica em solar home systems

    Energy Technology Data Exchange (ETDEWEB)

    Trigoso, Federico Morante

    2000-07-01

    The central objective of this work is to understand the relationships between the energy demand and technical, economic, social and cultural factors that could influence it. For this a field research was established with the inclusion of 18 families distributed in four communities located in the South Coast of the Vale da Ribeira, Vale da Ribeira. The energy consumption of these families was measured along more than one year and, to facilitate its execution, it was necessary to develop an equipment capable to supply the daily consumption in units of Ampere-hour. This instrument was coupled to the photovoltaic systems in those communities and, besides, it was materialized a methodology of data obtaining that includes the users participation. The obtaining of data manually sought to provide an inter-relationship among the system, the user and the researcher with the purpose of, besides the data purely technicians, to obtain social and cultural information related with the energy uses. Through this methodology it was possible to verify that the energy demand is related with a series of factors that escape from the previous context. It was verified that the social and cultural behavior of the peoples will be reflected overall in the photovoltaic systems operation. The master thesis shows ways to deep in those studies that will be helpful to design methodology that includes all the parameters involved, still ignored. (author)

  3. Supplying the energy demand in the chicken meat processing poultry with biogas

    Directory of Open Access Journals (Sweden)

    Adriano Henrique Ferrarez

    2016-04-01

    Full Text Available The main use of electrical energy in the chicken meat processing unit is refrigeration. About 70% of the electricity is consumed in the compressors for the refrigeration system. Through this study, the energetic viability of using biogas from poultry litter in supplying the demand for the refrigeration process was found. The meat processing unit studied has the potential to process about a hundred and sixty thousand chickens a day. The potential biogas production from poultry litter is 60,754,298.91 m3.year-1. There will be a surplus of approximately 8,103MWh per month of electric energy generated from biogas. An economic analysis was performed considering a planning horizon of 20 years and the discount rate of 12% per year. The economic analysis was performed considering scenario 1: sale of all electricity generated by the thermoelectric facility, and scenario 2: sale of the surplus electricity generated after complying with the demands of the refrigeration process and all other electrical energy and thermal energy use. Economic indicators obtained for scenarios 1 and 2 were favorable for the project implementation.

  4. Knowledge, Attitudes, and Practices on Energy Drink Consumption and Side Effects in a Cohort of Medical Students.

    Science.gov (United States)

    Casuccio, Alessandra; Bonanno, Valentina; Catalano, Rosanna; Cracchiolo, Manuela; Giugno, Sara; Sciuto, Valentina; Immordino, Palmira

    2015-01-01

    The purpose of this study was to evaluate knowledge, attitudes, and practices concerning energy drink consumption and the prevalence of side effects among medical students. Twenty-two percent of respondents were regular users, particularly men (p energy drinks. Forty-five percent of medical students declared side effects after energy drink consumption, such as palpitations (35%), insomnia (21%), and irritability (20%). The study confirms a large use of energy drinks among students and the occurrence of side effects. The use of energy drinks may influence the ingestion of large amounts of alcohol.

  5. Demand-side Management, Supply-side Management and Current Macro-policy Choic%需求管理、供给管理及当前宏观政策选择

    Institute of Scientific and Technical Information of China (English)

    李义平

    2016-01-01

    纵观市场经济国家从需求管理到供给管理的发展过程,并从需求管理及供给管理理论的特点及旨在解决问题出发,可以看出,我国当前经济面临的主要问题是结构调整和创新问题。选择供给管理的宏观经济政策是必要的。然而,供给管理必须要有适合的制度安排,这个制度的安排实质上是一个制度的变革问题。它包括加大真正的企业的供给、与市场经济相适应的政府职能转变、创新的制度安排等等。%This article explores how the country who uses a market economy walks from the supply side to the demand side on the way of macroeconomic manage-ment based on the problems these two arts or sciences are designed to deal with and an analysis of their characteristics. As the primary issues facing Chi-na’s current state of economy, innovation and structural adjustment, it argues, lead to urgent requirements for reforms on supply - side management and new institutional arrangements relevant to it.

  6. Energy demand and carbon emissions under different development scenarios for Shanghai, China

    Energy Technology Data Exchange (ETDEWEB)

    Li, Li [Institute of Environmental Pollution and Health, School of Environmental and Chemical Engineering, Shanghai University, Shanghai 200444 (China); Shanghai Academy of Environmental Sciences, 508 Qinzhou Road, Shanghai 200233 (China); Chen, Changhong; Huang, Cheng; Cheng, Zhen; Wang, Hongli; Huang, Haiying [Shanghai Academy of Environmental Sciences, 508 Qinzhou Road, Shanghai 200233 (China); Xie, Shichen; Lu, Jun [East China University of Science and Technology, Shanghai 200237 (China); Wang, Yangjun [Institute of Environmental Pollution and Health, School of Environmental and Chemical Engineering, Shanghai University, Shanghai 200444 (China); Dhakal, Shobhakar [Global Carbon Project, National Institute for Environmental Studies, 16-2 Onogawa, Tsukuba 305 8506 (Japan)

    2010-09-15

    In this paper, Shanghai's CO{sub 2} emissions from 1995 to 2006 were estimated following the IPCC guidelines. The energy demand and CO{sub 2} emissions were also projected until 2020, and the CO{sub 2} mitigation potential of the planned government policies and measures that are not yet implemented but will be enacted or adopted by the end of 2020 in Shanghai were estimated. The results show that Shanghai's total CO{sub 2} emissions in 2006 were 184 million tons of CO{sub 2}. During 1995-2006, the annual growth rate of CO{sub 2} emissions in Shanghai was 6.22%. Under a business-as-usual (BAU) scenario, total energy demand in Shanghai will rise to 300 million tons of coal equivalent in 2020, which is 3.91 times that of 2005. Total CO{sub 2} emissions in 2010 and 2020 will reach 290 and 630 million tons, respectively, under the BAU scenario. Under a basic-policy (BP) scenario, total energy demand in Shanghai will be 160 million tons of coal equivalent in 2020, which is 2.06 times that of 2005. Total CO{sub 2} emissions in 2010 and 2020 in Shanghai will be 210 and 330 million tons, respectively, 28% and 48% lower than those of the business-as-usual scenario. The results show that the currently planned energy conservation policies for the future, represented by the basic-policy scenario, have a large CO{sub 2} mitigation potential for Shanghai. (author)

  7. Energy demand and carbon emissions under different development scenarios for Shanghai, China

    Energy Technology Data Exchange (ETDEWEB)

    Li Li [Institute of Environmental Pollution and Health, School of Environmental and Chemical Engineering, Shanghai University, Shanghai 200444 (China); Shanghai Academy of Environmental Sciences, 508 Qinzhou Road, Shanghai 200233 (China); Chen Changhong, E-mail: chench@saes.sh.c [Shanghai Academy of Environmental Sciences, 508 Qinzhou Road, Shanghai 200233 (China); Xie Shichen [East China University of Science and Technology, Shanghai 200237 (China); Huang Cheng; Cheng Zhen; Wang Hongli [Shanghai Academy of Environmental Sciences, 508 Qinzhou Road, Shanghai 200233 (China); Wang Yangjun [Institute of Environmental Pollution and Health, School of Environmental and Chemical Engineering, Shanghai University, Shanghai 200444 (China); Huang Haiying [Shanghai Academy of Environmental Sciences, 508 Qinzhou Road, Shanghai 200233 (China); Lu Jun [East China University of Science and Technology, Shanghai 200237 (China); Dhakal, Shobhakar [Global Carbon Project, National Institute for Environmental Studies, 16-2 Onogawa, Tsukuba 305 8506 (Japan)

    2010-09-15

    In this paper, Shanghai's CO{sub 2} emissions from 1995 to 2006 were estimated following the IPCC guidelines. The energy demand and CO{sub 2} emissions were also projected until 2020, and the CO{sub 2} mitigation potential of the planned government policies and measures that are not yet implemented but will be enacted or adopted by the end of 2020 in Shanghai were estimated. The results show that Shanghai's total CO{sub 2} emissions in 2006 were 184 million tons of CO{sub 2}. During 1995-2006, the annual growth rate of CO{sub 2} emissions in Shanghai was 6.22%. Under a business-as-usual (BAU) scenario, total energy demand in Shanghai will rise to 300 million tons of coal equivalent in 2020, which is 3.91 times that of 2005. Total CO{sub 2} emissions in 2010 and 2020 will reach 290 and 630 million tons, respectively, under the BAU scenario. Under a basic-policy (BP) scenario, total energy demand in Shanghai will be 160 million tons of coal equivalent in 2020, which is 2.06 times that of 2005. Total CO{sub 2} emissions in 2010 and 2020 in Shanghai will be 210 and 330 million tons, respectively, 28% and 48% lower than those of the business-as-usual scenario. The results show that the currently planned energy conservation policies for the future, represented by the basic-policy scenario, have a large CO{sub 2} mitigation potential for Shanghai.

  8. Hierarchical control framework for integrated coordination between distributed energy resources and demand response

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Di; Lian, Jianming; Sun, Yannan; Yang, Tao; Hansen, Jacob

    2017-09-01

    Demand response is representing a significant but largely untapped resource that can greatly enhance the flexibility and reliability of power systems. In this paper, a hierarchical control framework is proposed to facilitate the integrated coordination between distributed energy resources and demand response. The proposed framework consists of coordination and device layers. In the coordination layer, various resource aggregations are optimally coordinated in a distributed manner to achieve the system-level objectives. In the device layer, individual resources are controlled in real time to follow the optimal power generation or consumption dispatched from the coordination layer. For the purpose of practical applications, a method is presented to determine the utility functions of controllable loads by taking into account the real-time load dynamics and the preferences of individual customers. The effectiveness of the proposed framework is validated by detailed simulation studies.

  9. Robust optimization based energy dispatch in smart grids considering demand uncertainty

    Science.gov (United States)

    Nassourou, M.; Puig, V.; Blesa, J.

    2017-01-01

    In this study we discuss the application of robust optimization to the problem of economic energy dispatch in smart grids. Robust optimization based MPC strategies for tackling uncertain load demands are developed. Unexpected additive disturbances are modelled by defining an affine dependence between the control inputs and the uncertain load demands. The developed strategies were applied to a hybrid power system connected to an electrical power grid. Furthermore, to demonstrate the superiority of the standard Economic MPC over the MPC tracking, a comparison (e.g average daily cost) between the standard MPC tracking, the standard Economic MPC, and the integration of both in one-layer and two-layer approaches was carried out. The goal of this research is to design a controller based on Economic MPC strategies, that tackles uncertainties, in order to minimise economic costs and guarantee service reliability of the system.

  10. Costs of integrating demand-based reproductive health commodity model into the Government and NGO service delivery systems in Bangladesh: a supply side perspective.

    Science.gov (United States)

    Islam, Ziaul; Sarker, Abdur Razzaque; Anwar, Shahela; Kabir, Humayun; Gazi, Rukhsana

    2015-01-01

    To estimate additional total cost and average cost of integrating the demand-based reproductive health commodity model into the existing Government and NGO facilities in Bangladesh. Activity based cost analysis was conducted during 2006-2008 in two low performing rural sub-districts (Nabigong and Raipur sub-district) and one urban slum area in Dhaka city, Bangladesh. Activity-based cost data were collected using ingredient approach, which comprised of listing all types of inputs by activity, quantities and prices for each input. Total cost was presented according to capital and recurrent items. The supply side perspective was considered for entire analysis. The total cost of integrating demand-based reproductive health commodity (DBRHC) model into the Government and NGO service delivery system was estimated to BDT 18,667,634 (US$274,524). The proportion of capital cost was 59 % and the recurrent cost was 41 % of the total cost. The average cost per beneficiaries was BDT 230 (US$3.38) only for introducing this model into the existing health system. The built-in interventions of DBRHC model were doable at low-cost at the selected Government and NGO settings at the grass-root level. The model has potential of further cost containment during scaling up-if the intervention costs are adjusted with the existing functionaries of the Government and NGOs.

  11. Model documentation report: Commercial Sector Demand Module of the National Energy Modeling System

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-02-01

    This report documents the objectives, analytical approach and development of the National Energy Modeling System (NEMS) Commercial Sector Demand Module. The report catalogues and describes the model assumptions, computational methodology, parameter estimation techniques, model source code, and forecast results generated through the synthesis and scenario development based on these components. This report serves three purposes. First, it is a reference document providing a detailed description for model analysts, users, and the public. Second, this report meets the legal requirement of the Energy Information Administration (EIA) to provide adequate documentation in support of its statistical and forecast reports (Public Law 93-275, section 57(b)(1)). Third, it facilitates continuity in model development by providing documentation from which energy analysts can undertake model enhancements, data updates, and parameter refinements as future projects.

  12. The rising demand for energy: a potential for optical fiber sensors in the monitoring sector

    Science.gov (United States)

    Bosselmann, Thomas; Willsch, Michael; Ecke, Wolfgang

    2008-03-01

    For a long time electric power was taken as a natural unlimited resource. With globalization the demand for energy has risen. This has brought rising prices for fossil fuels, as well as a diversification of power generation. Besides conventional fossil, nuclear plants are coming up again. Renewable energy sources are gaining importance resulting in recent boom of wind energy plants. In the past reliability and availability and an extremely long lifetime were of paramount importance. Today this has been added by cost, due to the global competition and the high fuel costs. New designs of power components have increased efficiency using lesser material. Higher efficiency causes inevitably higher stress on the materials, of which the machines are built. As a reduction of lifetime is not acceptable and maintenance costs are expected to be at a minimum, condition monitoring systems are going to being used now. This offers potentials for fiber optic sensor applications.

  13. Energy indicators for electricity production : comparing technologies and the nature of the indicators Energy Payback Ratio (EPR), Net Energy Ratio (NER) and Cumulative Energy Demand (CED). [Oestfoldforskning AS

    Energy Technology Data Exchange (ETDEWEB)

    Raadal, Hanne Lerche [Ostfold research, Fredrikstad (Norway); Modahl, Ingunn Saur [Ostfold research, Fredrikstad (Norway); Bakken, Tor Haakon [SINTEF Energy, Trondheim (Norway)

    2012-11-01

    Energy Demand (CED) were chosen to be reviewed and to benchmark technologies for production of electricity. In this report, generic definitions of the different energy indicators are used, making them applicable to different energy products (fuels, heat and electricity). The discussion and conclusions are also made as general as possible when the indicators are compared. In the benchmarking exercise the energy product under study is electricity.Conclusions - Comparing technologies. Hydropower clearly achieves the best energy performance according to the indicators EPR, NER and CED. Wind power achieves the second best performance while thermal power generation technologies based on biomass and fossil fuels give the lowest energy performance. There are large variations between the analysed technologies regarding the amount of primary energy needed to produce 1 kWh of electricity.The sources of primary energy used for producing electricity vary between the technologies. Electricity from hydropower, in particular, has a very high share of renewable energy as the primary source, while also wind power and bio-energy have high shares of renewables. The main energy sources required for producing electricity from coal and natural gas are fossil based.The study shows that second life cycle hydropower plants (which means upgrading and extension of old, existing plants) can have extremely high energy efficiency, measured by EPR. (Such plants are not shown in the figures in the summary, but are part of the results). For hydropower, the losses in waterways, turbines, generators and transformers are crucial for the ranking of cases when considering the whole life cycle (NER and CED). In general, this study gives no indication whether 'large' hydropower installations are more energy efficient than smaller installations, or whether reservoir hydropower plants are more energy efficient than run-of-river plants. Conclusions - Comparing indicators: The main reason for the

  14. Assessing the impact of energy saving measures on the future energy demand and related GHG (greenhouse gas) emission reduction of Croatia

    DEFF Research Database (Denmark)

    Pukšec, Tomislav; Mathiesen, Brian Vad; Novosel, Tomislav;

    2014-01-01

    and renewable energy sources. Croatian long-term energy demand and its effect on the future national GHG (greenhouse gas) emissions are analysed in this paper. For that purpose the NeD model was constructed (National energy demand model). The model is comprised out of six modules, each representing one sector...... to referent (frozen efficiency) scenario. Results obtained in this paper were also compared to the Croatian National Energy Strategy for the years 2020 and 2030. It was shown that if already implemented policies were properly taken into account the actual final energy demand for the year 2030 would be 43...

  15. Demand-side financing for maternal and newborn health: what do we know about factors that affect implementation of cash transfers and voucher programmes?

    Science.gov (United States)

    Hunter, Benjamin M; Murray, Susan F

    2017-08-31

    Demand-side financing (DSF) interventions, including cash transfers and vouchers, have been introduced to promote maternal and newborn health in a range of low- and middle-income countries. These interventions vary in design but have typically been used to increase health service utilisation by offsetting some financial costs for users, or increasing household income and incentivising 'healthy behaviours'. This article documents experiences and implementation factors associated with use of DSF in maternal and newborn health. A secondary analysis (using an adapted Supporting the Use of Research Evidence framework - SURE) was performed on studies that had previously been identified in a systematic review of evidence on DSF interventions in maternal and newborn health. The article draws on findings from 49 quantitative and 49 qualitative studies. The studies give insights on difficulties with exclusion of migrants, young and multiparous women, with demands for informal fees at facilities, and with challenges maintaining quality of care under increasing demand. Schemes experienced difficulties if communities faced long distances to reach participating facilities and poor access to transport, and where there was inadequate health infrastructure and human resources, shortages of medicines and problems with corruption. Studies that documented improved care-seeking indicated the importance of adequate programme scope (in terms of programme eligibility, size and timing of payments and voucher entitlements) to address the issue of concern, concurrent investments in supply-side capacity to sustain and/or improve quality of care, and awareness generation using community-based workers, leaders and women's groups. Evaluations spanning more than 15 years of implementation of DSF programmes reveal a complex picture of experiences that reflect the importance of financial and other social, geographical and health systems factors as barriers to accessing care. Careful design of DSF

  16. “Souls of the ancestor that knock us out” and other tales. A qualitative study to identify demand-side factors influencing malaria case management in Cambodia

    Directory of Open Access Journals (Sweden)

    O’Connell Kathryn A

    2012-10-01

    Full Text Available Abstract Background Appropriate case management of suspected malaria in Cambodia is critical given anti-malarial drug resistance in the region. Improving diagnosis and the use of recommended malarial treatments is a challenge in Cambodia where self-treatment and usage of drug cocktails is widespread, a notable difference from malaria treatment seeking in other countries. This qualitative study adds to the limited evidence base on Cambodian practices, aiming to understand the demand-side factors influencing treatment-seeking behaviour, including the types of home treatments, perceptions of cocktail medicines and reasons for diagnostic testing. The findings may help guide intervention design. Methods The study used in-depth interviews (IDIs (N = 16 and focus group discussions (FGDs (N = 12 with Cambodian adults from malaria-endemic areas who had experienced malaria fever in the previous two weeks. Data were analysed using NVivo software. Results Findings suggest that Cambodians initially treat suspected malaria at home with home remedies and traditional medicines. When seeking treatment outside the home, respondents frequently reported receiving a cocktail of medicines from trusted providers. Cocktails are perceived as less expensive and more effective than full-course, pre-packaged medicines. Barriers to diagnostic testing include a belief in the ability to self-diagnose based on symptoms, cost and reliance on providers to recommend a test. Factors that facilitate testing include recommendation by trusted providers and a belief that anti-malarial treatment for illnesses other than malaria can be harmful. Conclusions Treatment-seeking behaviour for malaria in Cambodia is complex, driven by cultural norms, practicalities and episode-related factors. Effective malaria treatment programmes will benefit from interventions and communication materials that leverage these demand-side factors, promoting prompt visits to facilities for suspected

  17. Joint Real-Time Energy and Demand-Response Management using a Hybrid Coalitional-Noncooperative Game

    Energy Technology Data Exchange (ETDEWEB)

    He, Fulin; Gu, Yi; Hao, Jun; Zhang, Jun Jason; Wei, Jiaolong; Zhang, Yingchen

    2015-11-11

    In order to model the interactions among utility companies, building demands and renewable energy generators (REGs), a hybrid coalitional-noncooperative game framework has been proposed. We formulate a dynamic non-cooperative game to study the energy dispatch within multiple utility companies, while we take a coalitional perspective on REGs and buildings demands through a h