Short-term Canadian natural gas deliverability 2005-2007 : an energy market assessment

International Nuclear Information System (INIS)

2005-10-01

This document examined the factors that influence gas supply in the short-term and presented an outlook for deliverability from 2005 to 2007. Recent trends in the production characteristics of the Western Canada Sedimentary Basin (WCSB) and the east coast offshore provide a better understanding of the short-term gas supply situation. High natural gas prices have resulted in record levels of drilling in Canada's natural gas exploration and production industry. Drilling levels are expected to remain high as industry will continue to maximize efforts to increase production. However, due to the maturity of the WCSB, the effort will result in only a modest increase in production over the next 2 years. The low decline characteristics of natural gas from coal (NGC) wells will have a stabilizing effect on WCSB deliverability over the long-term. It was noted that approximately 98 per cent of Canadian gas is produced from the WCSB with Alberta accounting for 80 per cent of the output. This assessment provided separate deliverability estimates for conventional gas in the WCSB, NGC, and offshore Nova Scotia. The contribution from offshore Nova Scotia will likely remain in the range of 10 to 11 million cubic metres per day until late 2006, and rise to an average of 13 million cubic metres per day in 2007 with added compression. It was concluded that Canadian deliverability will increase slightly through an increase in drilling activity. It was also noted that the province of Alberta and the petroleum industry are addressing the issue of drilling density, access to resources, noise and other environmental aspects of the expected increase in NGC activity. 3 tabs., 16 figs., 3 appendices

Evidence of Construct Validity for Work Values

Science.gov (United States)

Leuty, Melanie E.; Hansen, Jo-Ida C.

2011-01-01

Despite the importance of work values in the process of career adjustment (Dawis, 2002), little empirical research has focused on articulating the domains represented within the construct of work values and the examination of evidence of validity for the construct has been limited. Furthermore, the larger number of work values measures has made it…

20 CFR 638.300 - Eligibility for funds and eligible deliverers.

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Eligibility for funds and eligible deliverers. 638.300 Section 638.300 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR JOB CORPS PROGRAM UNDER TITLE IV-B OF THE JOB TRAINING PARTNERSHIP ACT Funding, Site Selection...

LANL12-RS-107J PYTHON Radiography Analysis Tool (PyRAT). Mid-Year Deliverable Report for FY15

International Nuclear Information System (INIS)

Temple, Brian Allen; Armstrong, Jerawan Chudoung

2015-01-01

This document is a mid-year report on a deliverable for the PYTHON Radiography Analysis Tool (PyRAT) for project LANL12-RS-107J in FY15. The deliverable is deliverable number 2 in the work package and is titled ''Add the ability to read in more types of image file formats in PyRAT''. Right now PyRAT can only read in uncompressed TIF files (tiff files). It is planned to expand the file formats that can be read by PyRAT, making it easier to use in more situations. A summary of the file formats added include jpeg, jpg, png and formatted ASCII files.

Evaluation of state of the art technologies, GLOBEMEN Deliverable D411

DEFF Research Database (Denmark)

van den Berg, Roel; Hannus, Matti; Pedersen, Jens Dahl

2000-01-01

topics such as tools, methods, and models, and can range from as wide as reference architectures to middleware technology. This document is organised as follows. The next chapter contains some requirements as defined by the industrial partners in Globemen. Chapter 3 contains virtual enterprise concepts...... and constructs for background information. The frame for the remainder of the document is set in chapter 4, where ALIVE (Architecture for Layered Integration of Virtual Enterprises) is introduced. Each of the components in ALIVE is subsequently discussed in detail in the chapters 6 to 10. Chapter 5 discusses...... reference architectures and methodologies, which should guide a user to fill in the various types of integration as indicated by ALIVE. The first type of integration, inter-enterprise coordination, is not described in this deliverable, but in the various WP1-3 deliverables. The topic of modelling languages...

Monitoring framework and description of indicators. Deliverable D5.1

NARCIS (Netherlands)

Holtzer, A.C.G.; Giessen, A.M. van der; Munck, S.G.E. de; Poel, M.A.; Smets, R.C.J.

2012-01-01

This deliverable describes the monitoring framework that will be used to monitor and evaluate the GEN6 project and its nine pilots. The main topics are IPv6 uptake and governance, as described by the EC. Monitoring and evaluation will be done during the course of the project. This report describes

Deliverable 1.2.7: Cross-cultural benefit segmentation of consumers

NARCIS (Netherlands)

Reinders, M.J.; Onwezen, M.C.; Sijtsema, S.J.; Zimmermann, K.L.; Berg, van den I.; Jasiulewicz, A.; Guardia, M.D.; Guerrero, L.

2010-01-01

The present report, deliverable D.1.2.7, gives a final view of the work done in ISAFruit Work Package (WP) 1.2. Average Europe fruit consumption is below the recommended level and moreover the consumption level is still decreasing in Europe. A large survey was carried out in four European countries

Driving simulator test results Deliverable no D6.3. Final draft

NARCIS (Netherlands)

Weiland, J.; Mattes, S.; Kuhn, F.; Gelau, Ch.; Schindhelm, R.; Hoedemaeker, D.D.M.

2003-01-01

Deliverable 6.3 reports the procedure and results from a driving simulator study. This study was carried out to test the efficiency of the principles of the in-vehicle information manager, which was developed within the Comunicar project. Thirty-six subjects were tested in a fixed-base driving

The Italian validation of the Salford-Scott Nursing Values Questionnaire.

Science.gov (United States)

Mecugni, Daniela; Albinelli, Patrizia; Pellegrin, Joellemarie; Finotto, Stefano

2015-03-01

To properly direct nursing training and to improve the professional practice to become more effective, it is important to understand students' values. Literature review has shown that there have been changes in students' values in the last 20 years. In contemporary students, a general decrease in altruism has been observed, but also a larger appreciation for honesty toward patients has been declared. The analyzed literature did not find validated tools available in Italian that explore personal and professional values of nursing students. This study was an Italian linguistic and cultural adaptation of a research tool. The authors aimed to validate, for the Italian context, the Salford-Scott Nursing Values Questionnaire, enhanced by Johnson to explore the nursing profession's values. The Beaton Model was used as well as Valmi's. These models require five phases, with the goal of producing a pre-final version of the instrument for it to then be administered to a sample of the target and expert population. The study was approved by the Council of the Nursing Degree University course of the Modena and Reggio Emilia University, Reggio Emilia site, and the identity of the subjects was protected at every moment of the testing. Face validation was achieved since the clarity percentile for each item was 100%. Content validity was also reached, measured from the content validity index and the scale validity index. The study has confirmed the reliability of the instrument's internal consistence with a value of Cronbach's alpha on 0.95 of total of items. The reliability of the test-retest confirms the stability of the instrument in time (r = 0.908; p = 0.01). The study concludes that the instrument is ready to be administered to the target population, a sample group of nursing students. © The Author(s) 2014.

Road Safety Data, Collection, Transfer and Analysis DaCoTa. Deliverable 1.2: Road safety management investigation model and questionnaire.

NARCIS (Netherlands)

Dupont, H. Martensen, H. Papadimitriou, E. Yannis, G. Muhlrad, N. Jähi, H. Vallet, G. Giustiniani, G. Tripodi, A. Usami, D. Bax, C. Wijnen, W. Schöne, M.-L. Machata, K. Buttler, I. Zysinska, M. Talbot, R. Gitelman, V. & Hakkert, S. & Muhlrad, N. Gitelman, V. & Buttler, I. (Eds.)

2012-01-01

The aim of the DaCoTA Work Package 1 is to investigate road safety policy-making and management processes in Europe. In the Deliverables released previously, the Work Package 1 assessed the experts’ needs in terms of road safety knowledge, data and decision support tools (Deliverable 1.1/4.1), as

Test results evaluation: Pilot evaluations Deliverable no D6.5. Final draft

NARCIS (Netherlands)

Hoedemaeker, D.M.; Dangelmaier, M.; Gelau, C.; Mattes, S.; Montanari, R.

2003-01-01

This deliverable describes the User Centred Design approach that has been adopted within the COMUNICAR project. In this design approach several iterative steps were taken to design and evaluate the multimedia Human Machine Interface that is able to manage all the information exchanges between the

Modeling & Simulation Education for the Acquisition and T&E Workforce: FY07 Deliverable Package

National Research Council Canada - National Science Library

Olwell, David H; Johnson, Jean; Few, Stephanie; Didoszak, Jarema M

2007-01-01

This technical report presents the deliverables for calendar year 2007 for the "Educating the Modeling and Simulation Workforce" project performed for the DoD Modeling and Simulation Steering Committee...

SU-F-T-333: Deliverability Considerations in Modulated Photon Radiotherapy (XMRT)

Energy Technology Data Exchange (ETDEWEB)

McGeachy, P [Department of Medical Physics, CancerCare Manitoba, Winnipeg, MB (Canada); Weppler, S; Villarreal-Barajas, J [Department of Physics and Astronomy, University of Calgary, Calgary, Alberta (Canada); Department of Medical Physics, Tom Baker Cancer Center, Calgary, AB (Canada); Zinchenko, Y [Department of Mathematics and Statistics, University of Calgary, Calgary, Alberta (Canada); Khan, R [Department of Radiation Oncology, Washington University School of Medicine, St. Louis, MO (United States)

2016-06-15

Purpose: Modulated Photon Radiotherapy (XMRT), which simultaneously optimizes photon beamlet energy (6 and 18 MV) and fluence, has shown dosimetric improvements for fluence map optimization (FMO) when compared to conventional single-energy intensity modulated radiotherapy. However, generating deliverable multi-leaf collimator (MLC) sequences for XMRT needs to be explored. Therefore, two problems were investigated: 1) The ability to generate MLC-sequenced fluence maps from FMO XMRT solutions for a prostate case 2) The impact of fluence smoothening constraints imposed in the FMO on the deliverability and dose distribution. Methods: XMRT FMO solutions for a clinical prostate case employing standard dosimetric constraints, prescriptions, and a seven coplanar beam arrangement were generated. Smoothening constraints in the FMO utilized a sum of positive gradients approach. Sequenced maps were generated using an in-house optimization algorithm (MLCSO). The maximum leaf speed, minimum leaf separation, and transmission through MLC leaves were set to 2.5 mm/s, 1 mm, and 1%, respectively. The resulting sequenced maps for each field were compared with the original FMO solutions through gamma analysis (0.5%/0.5 mm) and root mean square error (RMSE). This comparison was done for both the smoothed and unsmoothed XMRT solutions. Results: Average RMSE and gamma agreement of 0.44, 93%and 0.36, 95% were obtained for unsmoothed 6 and 18 MV contributions from XMRT sequenced maps. The sequenced maps with smoothening constraints had better agreement with their respective optimal fluences, with RMSEs of 0 and gamma pass rates of 100% for all comparisons. This improved smoothening led to increased dose to critical structures (rectum, bladder, and femoral heads); however solutions were still clinically acceptable. Conclusion: For a clinical prostate case, XMRT FMO fluence maps were suitable for conversion into deliverable MLC sequences. Imposing smoothening constraints during FMO resulted

Opening the SMS platform to users : Deliverable D7.2 - RISIS project

NARCIS (Netherlands)

van den Besselaar, P.A.A.; Khalili, A.; de Graaf, K.A.; Idrissou, O.A.K.; van Harmelen, Frank

2017-01-01

In this deliverable we describe the SMS (Semantically Mapping Science) data integration platform (http://sms.risis.eu), the technical core within the RISIS data infrastructure for Science, Technology and Innovation Studies (STI). The aim of the platform is to produce richer data to be used in social

Stakeholder Values and Ecosystems

OpenAIRE

Sveinsdottir, Thordis; Wessels, Bridgette; Smallwood, Rod; Linde, Peter; Kalla, Vasso; Tsoukala, Victoria; Sondervan, Jeroen

2013-01-01

This report is the deliverable for Work Package 1 (WP1), Stakeholder Values and Ecosystems, of the EU FP7 funded project RECODE (Grant Agreement No: 321463), which focuses on developing Policy Recommendations for Open Access to Research Data in Europe. WP1 focuses on understanding stakeholder values and ecosystems in Open Access, dissemination and preservation in the area of scientific and scholarly data (thus not government data). The objectives of this WP are as follows: • Identify and map ...

Plug-in hybrid electric vehicle value proposition study. Phase 1, task 2, select value proposition/business model for further study

Science.gov (United States)

2008-04-01

The objective of Task 2 is to identify the combination of value propositions that is : believed to be achievable by 2030 and collectively hold promise for a sustainable : PHEV market by 2030. This deliverable outlines what the project team (with inpu...

Reliability and validity of the Salford-Scott Nursing Values Questionnaire in Turkish.

Science.gov (United States)

Ulusoy, Hatice; Güler, Güngör; Yıldırım, Gülay; Demir, Ecem

2018-02-01

Developing professional values among nursing students is important because values are a significant predictor of the quality care that will be provided, the clients' recognition, and consequently the nurses' job satisfaction. The literature analysis showed that there is only one validated tool available in Turkish that examines both the personal and the professional values of nursing students. The aim of this study was to assess the reliability and validity of the Salford-Scott Nursing Values Questionnaire in Turkish. This study was a Turkish linguistic and cultural adaptation of a research tool. Participants and research context: The sample of this study consisted of 627 undergraduate nursing students from different geographical areas of Turkey. Two questionnaires were used for data collection: a socio-demographic form and the Salford-Scott Nursing Values Questionnaire. For the Salford-Scott Nursing Values Questionnaire, construct validity was examined using factor analyses. Ethical considerations: The study was approved by the Cumhuriyet University Faculty of Medicine Research Ethics Board. Students were informed that participation in the study was entirely voluntary and anonymous. Item content validity index ranged from 0.66 to 1.0, and the total content validity index was 0.94. The Kaiser-Meyer-Olkin measure of sampling was 0.870, and Bartlett's test of sphericity was statistically significant (x 2 = 3108.714, p < 0.001). Construct validity was examined using factor analyses and the six factors were identified. Cronbach's alpha was used to assess the internal consistency reliability and the value of 0.834 was obtained. Our analyses showed that the Turkish version of Salford-Scott Nursing Values Questionnaire has high validity and reliability.

Short-term Canadian natural gas deliverability 2008-2010 : an energy market assessment

International Nuclear Information System (INIS)

2008-10-01

This document examined the factors that affect gas supply in the short term and presented an outlook for deliverability through 2010. Its primary purpose was to advance public understanding of the short-term gas supply situation in Canada. For the past several years, Canadian natural gas has provided about 25 per cent of combined Canadian and U.S. production. Canadian gas deliverability remained within a narrow range from 2000 to mid-2007 at around 483 million cubic metres and has since begun to decline. About 98 per cent of the Canadian volume comes from the Western Canada Sedimentary Basin (WCSB), with most of the rest coming from Atlantic Canada. Although drilling and development activity in the WCSB has depended on the price of natural gas relative to costs, that price was influenced by uncertainties such as weather-driven market demand, changes in natural gas supply, cost, attractiveness of other basins, availability of imported liquefied natural gas and possible supply disruptions in the Gulf of Mexico. Shale gas and tight gas prospects in the Horn River and Montney plays of northeast British Columbia have attracted considerable interest from Canada's upstream industry. Early stages of shale gas development are also underway in Quebec and the Maritimes. However, the viability of large scale commercial development of shale gas in Canada has yet to be proven. In order to reflect the short-term uncertainty of the North American natural gas market, this report project deliverability under 3 cases that reflect different levels of drilling investment, namely reference case, high case and low case scenarios. 4 tabs., 12 figs

Short-term Canadian natural gas deliverability 2008-2010 : an energy market assessment

Energy Technology Data Exchange (ETDEWEB)

NONE

2008-10-15

This document examined the factors that affect gas supply in the short term and presented an outlook for deliverability through 2010. Its primary purpose was to advance public understanding of the short-term gas supply situation in Canada. For the past several years, Canadian natural gas has provided about 25 per cent of combined Canadian and U.S. production. Canadian gas deliverability remained within a narrow range from 2000 to mid-2007 at around 483 million cubic metres and has since begun to decline. About 98 per cent of the Canadian volume comes from the Western Canada Sedimentary Basin (WCSB), with most of the rest coming from Atlantic Canada. Although drilling and development activity in the WCSB has depended on the price of natural gas relative to costs, that price was influenced by uncertainties such as weather-driven market demand, changes in natural gas supply, cost, attractiveness of other basins, availability of imported liquefied natural gas and possible supply disruptions in the Gulf of Mexico. Shale gas and tight gas prospects in the Horn River and Montney plays of northeast British Columbia have attracted considerable interest from Canada's upstream industry. Early stages of shale gas development are also underway in Quebec and the Maritimes. However, the viability of large scale commercial development of shale gas in Canada has yet to be proven. In order to reflect the short-term uncertainty of the North American natural gas market, this report project deliverability under 3 cases that reflect different levels of drilling investment, namely reference case, high case and low case scenarios. 4 tabs., 12 figs.

SU-G-BRC-02: A Novel Multi-Criteria Optimization Approach to Generate Deliverable Intensity-Modulated Radiation Therapy (IMRT) Treatment Plans

Energy Technology Data Exchange (ETDEWEB)

Kirlik, G; D’Souza, W; Zhang, H [University of Maryland School of Medicine, Baltimore, MD (United States)

2016-06-15

Purpose: To present a novel multi-criteria optimization (MCO) solution approach that generates treatment plans with deliverable apertures using column generation. Methods: We demonstrate our method with 10 locally advanced head-and-neck cancer cases retrospectively. In our MCO formulation, we defined an objective function for each structure in the treatment volume. This resulted in 9 objective functions, including 3 distinct objectives for primary target volume, high-risk and low-risk target volumes, 5 objectives for each of the organs-at-risk (OARs) (two parotid glands, spinal cord, brain stem and oral cavity), and one for the non-target non-OAR normal tissue. Conditional value-at-risk (CVaR) constraints were utilized to ensure at least certain fraction of the target volumes receiving the prescription doses. To directly generate deliverable plans, column generation algorithm was embedded within our MCO approach for aperture shape generation. Final dose distributions for all plans were generated using a Monte Carlo kernel-superposition dose calculation. We compared the MCO plans with the clinical plans, which were created by clinicians. Results: At least 95% target coverage was achieved by both MCO plans and clinical plans. However, the average conformity indices of clinical plans and the MCO plans were 1.95 and 1.35, respectively (31% reduction, p<0.01). Compared to the conventional clinical plan, the proposed MCO method achieved average reductions in left parotid mean dose of 5% (p=0.06), right parotid mean dose of 18% (p<0.01), oral cavity mean dose of 21% (p=0.03), spinal cord maximum dose of 20% (p<0.01), brain stem maximum dose of 61% (p<0.01), and normal tissue maximum dose of 5% (p<0.01), respectively. Conclusion: We demonstrated that the proposed MCO method was able to obtain deliverable IMRT treatment plans while achieving significant improvements in dosimetric plan quality.

Deliverability on the interstate natural gas pipeline system

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-05-01

Deliverability on the Interstate Natural Gas Pipeline System examines the capability of the national pipeline grid to transport natural gas to various US markets. The report quantifies the capacity levels and utilization rates of major interstate pipeline companies in 1996 and the changes since 1990, as well as changes in markets and end-use consumption patterns. It also discusses the effects of proposed capacity expansions on capacity levels. The report consists of five chapters, several appendices, and a glossary. Chapter 1 discusses some of the operational and regulatory features of the US interstate pipeline system and how they affect overall system design, system utilization, and capacity expansions. Chapter 2 looks at how the exploration, development, and production of natural gas within North America is linked to the national pipeline grid. Chapter 3 examines the capability of the interstate natural gas pipeline network to link production areas to market areas, on the basis of capacity and usage levels along 10 corridors. The chapter also examines capacity expansions that have occurred since 1990 along each corridor and the potential impact of proposed new capacity. Chapter 4 discusses the last step in the transportation chain, that is, deliverability to the ultimate end user. Flow patterns into and out of each market region are discussed, as well as the movement of natural gas between States in each region. Chapter 5 examines how shippers reserve interstate pipeline capacity in the current transportation marketplace and how pipeline companies are handling the secondary market for short-term unused capacity. Four appendices provide supporting data and additional detail on the methodology used to estimate capacity. 32 figs., 15 tabs.

Natural gas market assessment. Natural gas supply, western Canada: Recent developments (1982-1992), [and] short-term deliverability outlook (1993-1996)

International Nuclear Information System (INIS)

1993-11-01

A review is presented of the evolution of gas supply from western Canada over the last ten years and a short-term forecast of gas deliverability. To illustrate the changed supply conditions, selected trends and market developments are summarized, including trends in excess deliverability, changes in reserves, the regional distribution of cumulative production, the pace of tieing-in of previously discovered pools for production, the expansion in deliverability from gas storage reservoirs, and recent increases in drilling activity. On the basis of analyses and observations, it is concluded that estimated productive capacity is likely to exceed pipeline capacity on a peak-day basis by a narrow margin over 1993-96. Increasing deliverability from gas storage reservoirs located in the producing provinces is an important factor in handling peak day requirements. From time to time, high demand due to extreme weather conditions could result in pronounced tightness and price fluctuations similar to those seen in winter 1992/93. A strong economic recovery could also result in market tightness, depending on the speed and size of supply response. The growing estimates of resource potential in the western Canada sedimentary basin provide an encouraging indication of the availability of future supply. 29 figs., 3 tabs

VALUE - Validating and Integrating Downscaling Methods for Climate Change Research

Science.gov (United States)

Maraun, Douglas; Widmann, Martin; Benestad, Rasmus; Kotlarski, Sven; Huth, Radan; Hertig, Elke; Wibig, Joanna; Gutierrez, Jose

2013-04-01

Our understanding of global climate change is mainly based on General Circulation Models (GCMs) with a relatively coarse resolution. Since climate change impacts are mainly experienced on regional scales, high-resolution climate change scenarios need to be derived from GCM simulations by downscaling. Several projects have been carried out over the last years to validate the performance of statistical and dynamical downscaling, yet several aspects have not been systematically addressed: variability on sub-daily, decadal and longer time-scales, extreme events, spatial variability and inter-variable relationships. Different downscaling approaches such as dynamical downscaling, statistical downscaling and bias correction approaches have not been systematically compared. Furthermore, collaboration between different communities, in particular regional climate modellers, statistical downscalers and statisticians has been limited. To address these gaps, the EU Cooperation in Science and Technology (COST) action VALUE (www.value-cost.eu) has been brought into life. VALUE is a research network with participants from currently 23 European countries running from 2012 to 2015. Its main aim is to systematically validate and develop downscaling methods for climate change research in order to improve regional climate change scenarios for use in climate impact studies. Inspired by the co-design idea of the international research initiative "future earth", stakeholders of climate change information have been involved in the definition of research questions to be addressed and are actively participating in the network. The key idea of VALUE is to identify the relevant weather and climate characteristics required as input for a wide range of impact models and to define an open framework to systematically validate these characteristics. Based on a range of benchmark data sets, in principle every downscaling method can be validated and compared with competing methods. The results of

Predictive value and construct validity of the work functioning screener-healthcare (WFS-H).

Science.gov (United States)

Boezeman, Edwin J; Nieuwenhuijsen, Karen; Sluiter, Judith K

2016-05-25

To test the predictive value and convergent construct validity of a 6-item work functioning screener (WFS-H). Healthcare workers (249 nurses) completed a questionnaire containing the work functioning screener (WFS-H) and a work functioning instrument (NWFQ) measuring the following: cognitive aspects of task execution and general incidents, avoidance behavior, conflicts and irritation with colleagues, impaired contact with patients and their family, and level of energy and motivation. Productivity and mental health were also measured. Negative and positive predictive values, AUC values, and sensitivity and specificity were calculated to examine the predictive value of the screener. Correlation analysis was used to examine the construct validity. The screener had good predictive value, since the results showed that a negative screener score is a strong indicator of work functioning not hindered by mental health problems (negative predictive values: 94%-98%; positive predictive values: 21%-36%; AUC:.64-.82; sensitivity: 42%-76%; and specificity 85%-87%). The screener has good construct validity due to moderate, but significant (ppredictive value and good construct validity. Its score offers occupational health professionals a helpful preliminary insight into the work functioning of healthcare workers.

Value-Eroding Teacher Behaviors Scale: A Validity and Reliability Study

Science.gov (United States)

Arseven, Zeynep; Kiliç, Abdurrahman; Sahin, Seyma

2016-01-01

In the present study, it is aimed to develop a valid and reliable scale for determining value-eroding behaviors of teachers, hence their values of judgment. The items of the "Value-eroding Teacher Behaviors Scale" were designed in the form of 5-point likert type rating scale. The exploratory factor analysis (EFA) was conducted to…

Super's Work Values Inventory-Revised Scale Validation for African Americans

Science.gov (United States)

Hammond, Marie S.; Betz, Nancy E.; Multon, Karen D.; Irvin, Tawana

2010-01-01

The psychometric properties of Super's Work Values Inventory-Revised (SWVI-R) were examined in a sample of 213 African American college students. Results indicated that the 12-values scales were as reliable and as valid in a sample of African Americans as has been demonstrated within a predominantly White college student sample. Values of…

Deliverable D.8.4. Social data visualization and navigation services -3rd Year Update-

NARCIS (Netherlands)

Bitter-Rijpkema, Marlies; Brouns, Francis; Drachsler, Hendrik; Fazeli, Soude; Sanchez-Alonso, Salvador; Rajabi, Enayat; Kolovou, Lamprini

2015-01-01

Within the Open Discovery Space our study (T.8.4) focused on ”Enhanced Social Data Visualization & Navigation Services. This deliverable provides the prototype report regarding the deployment of adapted visualization and navigation services to be integrated in the ODS Social Data Management Layer.

Record of principal work activities/deliverables

International Nuclear Information System (INIS)

1989-09-01

Over the five year period of performance, thirteen task assignments were issued by the DOE to ARINC Research. During the two year base period seven tasks were assigned. Two task assignments were issued for each of the three consecutive one year option periods. Associated with all task assignments were multiple subtasks, some of which required significant effort. These subtasks are appropriately cited in this report under their respective task assignments as principal work activities or deliverables. The technical and management support provided to the DOE under this contract focused on two general areas: (1) appraisal activities and (2) non-appraisal activities. Support to appraisals included planning, document review, developing lines-of-inquiry, interviewing, data collection, report writing, and follow-up. Such work was executed both on-site at the DOE facility under review and off-site. Non-appraisal support was varied and included such areas as document review, data base development, technical assessments. statistical analysis, policy analysis, reliability engineering, and workshop and conference planning and execution

Predictive value and construct validity of the work functioning screener-healthcare (WFS-H)

Science.gov (United States)

Boezeman, Edwin J.; Nieuwenhuijsen, Karen; Sluiter, Judith K.

2016-01-01

Objectives: To test the predictive value and convergent construct validity of a 6-item work functioning screener (WFS-H). Methods: Healthcare workers (249 nurses) completed a questionnaire containing the work functioning screener (WFS-H) and a work functioning instrument (NWFQ) measuring the following: cognitive aspects of task execution and general incidents, avoidance behavior, conflicts and irritation with colleagues, impaired contact with patients and their family, and level of energy and motivation. Productivity and mental health were also measured. Negative and positive predictive values, AUC values, and sensitivity and specificity were calculated to examine the predictive value of the screener. Correlation analysis was used to examine the construct validity. Results: The screener had good predictive value, since the results showed that a negative screener score is a strong indicator of work functioning not hindered by mental health problems (negative predictive values: 94%-98%; positive predictive values: 21%-36%; AUC:.64-.82; sensitivity: 42%-76%; and specificity 85%-87%). The screener has good construct validity due to moderate, but significant (pvalue and good construct validity. Its score offers occupational health professionals a helpful preliminary insight into the work functioning of healthcare workers. PMID:27010085

Fluctuations and predictability of wind and hydropower. Deliverable 2.1

DEFF Research Database (Denmark)

Giebel, Gregor; Holttinen, H.; Söder, L.

2004-01-01

The report forms the deliverable D2.1 of the EU supported project Wind Power Integration in a Liberalised Electricity Market (WILMAR). The handling and generation of the necessary wind and hydro time series for the project’s power system planningsimulation model is described. The wind power...... and the hydro power time series on hourly basis are generated on basis of real data for all the geographical regions included in the analysis in order to realistically represent the various correlations intime and displacement. Models have been developed to generate various realistic future time series based...

Ecodriver. D23.1: Report on test scenarios for val-idation of on-line vehicle algorithms

NARCIS (Netherlands)

Seewald, P.; Ivens, T.W.T.; Spronkmans, S.

2014-01-01

This deliverable provides a description of test scenarios that will be used for validation of WP22’s on-line vehicle algorithms. These algorithms consist of the two modules VE³ (Vehicle Energy and Environment Estimator) and RSG (Reference Signal Genera-tor) and will be tested using the

Measuring striving for understanding and learning value of geometry: a validity study

Science.gov (United States)

Ubuz, Behiye; Aydınyer, Yurdagül

2017-11-01

The current study aimed to construct a questionnaire that measures students' personality traits related to striving for understanding and learning value of geometry and then examine its psychometric properties. Through the use of multiple methods on two independent samples of 402 and 521 middle school students, two studies were performed to address this issue to provide support for its validity. In Study 1, exploratory factor analysis indicated the two-factor model. In Study 2, confirmatory factor analysis indicated the better fit of two-factor model compared to one or three-factor model. Convergent and discriminant validity evidence provided insight into the distinctiveness of the two factors. Subgroup validity evidence revealed gender differences for striving for understanding geometry trait favouring girls and grade level differences for learning value of geometry trait favouring the sixth- and seventh-grade students. Predictive validity evidence demonstrated that the striving for understanding geometry trait but not learning value of geometry trait was significantly correlated with prior mathematics achievement. In both studies, each factor and the entire questionnaire showed satisfactory reliability. In conclusion, the questionnaire was psychometrically sound.

Data needs and computational requirements for ST decision making. Internal deliverable ID6.2.1

DEFF Research Database (Denmark)

Clement, Rémy; Tournebise, Pascal; Perkin, Samuel

The objective of this deliverable is to present the requirements for adapting available tools/models and identifying data needs for probabilistic reliability analysis and optimal decision-making in the short-term decision making process. It will serve as a basis for the next tasks of GARPUR work ...

Possibilities for a valorisation of geomorphologic research deliverables

Science.gov (United States)

Geilhausen, M.; Götz, J.; Otto, J.-C.; Schrott, L.

2009-04-01

Many geomorphological studies focus on fundamental research questions in large parts, although there are lots of applied fields like landslide hazard assessment or water framework directive. As fundamental research is a common property, their outcomes should be more "open" and accessible to the public. This means that scientists have to find new ways presenting their results and outcomes besides publishing in scientific journals. This paper shows possibilities for a valorisation of geomorphologic research deliverables using print as well as digital media. Geotrails explain remarkable and exciting landscape features using information boards and become more and more popular and important for tourism in many parts of the world. With the growing interest in environmental change and outdoor activities, print media like field guides reach an increasing number of people. Field guides and Geotrails can be coupled in order to arise awareness about geomorphological landforms and to deliver more specific information on the site beyond the information given on the boards in the field. As field guides are designed for the general public they can be used for educational purposes as well. Today, this information can also be found in the internet offering virtual trips through landscapes using dynamic maps. Here, server side GIS technologies (WebGIS) using standardised interfaces provide new possibilities to show geomorphic data to the public and to share them with the scientific community. Furthermore, data formats like XML or KML are powerful tools for data exchange and can be used in interactive data viewers like Google Earth. We will present the Geotrail "Geomorphologischer Lehrpfad am Fuße der Zugspitze. Das Reintal - Eine Wanderung durch Raum und Zeit" (Bavarian Alps, Germany). Additionally, three geomorphologic WebGIS applications (Geomorphologic map Turtmanntal, Permafrostmap of Austria, Geomorphologic maps of Germany) will exemplify how geomorphologic information and

TRANSIT WP3 deliverable D3.2 – “A first prototype of TSI theory”

DEFF Research Database (Denmark)

Haxeltine, Alex; Kemp, René; Dumitru, Adina

2015-01-01

The purpose of this deliverable (D3. 2) of the TRANSIT research project is to report on the development of a 'first prototype'of a middle-range theory of transformative social innovation. The 'prototype'is presented here in the form a framework for Transformative Social Innovation, which at this ...

Capabilities and costs for ancillary services provision by wind power plants. Deliverable D 3.1

DEFF Research Database (Denmark)

Faiella, Mariano; Hennig, Tobias; Cutululis, Nicolaos Antonio

This report is the deliverable of the third work package of the REserviceS project and describes the technical options and related costs for the provision of ancillary services specifically from wind energy technologies. It is focused on the set of ancillary services defined in the previous work...

An Improved Fuzzy Based Missing Value Estimation in DNA Microarray Validated by Gene Ranking

Directory of Open Access Journals (Sweden)

Sujay Saha

2016-01-01

Full Text Available Most of the gene expression data analysis algorithms require the entire gene expression matrix without any missing values. Hence, it is necessary to devise methods which would impute missing data values accurately. There exist a number of imputation algorithms to estimate those missing values. This work starts with a microarray dataset containing multiple missing values. We first apply the modified version of the fuzzy theory based existing method LRFDVImpute to impute multiple missing values of time series gene expression data and then validate the result of imputation by genetic algorithm (GA based gene ranking methodology along with some regular statistical validation techniques, like RMSE method. Gene ranking, as far as our knowledge, has not been used yet to validate the result of missing value estimation. Firstly, the proposed method has been tested on the very popular Spellman dataset and results show that error margins have been drastically reduced compared to some previous works, which indirectly validates the statistical significance of the proposed method. Then it has been applied on four other 2-class benchmark datasets, like Colorectal Cancer tumours dataset (GDS4382, Breast Cancer dataset (GSE349-350, Prostate Cancer dataset, and DLBCL-FL (Leukaemia for both missing value estimation and ranking the genes, and the results show that the proposed method can reach 100% classification accuracy with very few dominant genes, which indirectly validates the biological significance of the proposed method.

CRISP. Functional Specifications of electric Networks with high degrees of distributed generation. Deliverable D1.1

International Nuclear Information System (INIS)

Fontela, M.; Bacha, S.; Hadsjaid, N.; Andrieu, C.

2007-09-01

The deliverable D 1.1 is the first step in the project. This D 1.1 deliverable treats the different components: networks, generation sources and also the actors present in the energy market. The French system is usually commented but comments about the other countries uses are also mentioned. Special attention has been paid to the Dutch system, and a comparison is made between the French and the Dutch system. The main goal of this work is to describe the electric system and its components. Also a benchmarking model is proposed in order to start the studies of the different work package. This benchmarking model implies: the transmission, sub-transmission and distribution electric sub-systems. From this model, different scenarios of perturbations are studied. These scenarios correspond to different framework times (transient and steady states) and they could become fatal for the system operation

Identification of preferred dipole design options and cost estimates: Deliverable D5.2

CERN Document Server

Tommasini, Davide

2017-01-01

This document contains a description of the preferred 16 Tesla dipole magnet baseline design with its expected performances. The document also includes an analysis of the individual merits and risks of the different, initial design options and gives a justification for the selection of the baseline design. The deliverable includes expected field levels, field errors and a cost estimate, which serve as input for the arc design consolidation.

SU-F-P-64: The Impact of Plan Complexity Parameters On the Plan Quality and Deliverability of Volumetric Modulated Arc Therapy with Canonical Correlation Analysis

Energy Technology Data Exchange (ETDEWEB)

Jin, X; Yi, J; Xie, C [The 1st Affiliated Hospital of Wenzhou Medical University, Wenzhou, Zhejiang (China)

2016-06-15

Purpose: To evaluate the impact of complexity indices on the plan quality and deliverability of volumetric modulated arc therapy (VMAT), and to determine the most significant parameters in the generation of an ideal VMAT plan. Methods: A multi-dimensional exploratory statistical method, canonical correlation analysis (CCA) was adopted to study the correlations between VMAT parameters of complexity, quality and deliverability, as well as their contribution weights with 32 two-arc VMAT nasopharyngeal cancer (NPC) patients and 31 one-arc VMAT prostate cancer patients. Results: The MU per arc (MU/Arc) and MU per control point (MU/CP) of NPC were 337.8±25.2 and 3.7±0.3, respectively, which were significantly lower than those of prostate cancer patients (MU/Arc : 506.9±95.4, MU/CP : 5.6±1.1). The plan complexity indices indicated that two-arc VMAT plans were more complex than one-arc VMAT plans. Plan quality comparison confirmed that one-arc VMAT plans had a high quality than two-arc VMAT plans. CCA results implied that plan complexity parameters were highly correlated with plan quality with the first two canonical correlations of 0.96, 0.88 (both p<0.001) and significantly correlated with deliverability with the first canonical correlation of 0.79 (p<0.001), plan quality and deliverability was also correlated with the first canonical correlation of 0.71 (p=0.02). Complexity parameters of MU/CP, segment area (SA) per CP, percent of MU/CP less 3 and planning target volume (PTV) were weighted heavily in correlation with plan quality and deliveability . Similar results obtained from individual NPC and prostate CCA analysis. Conclusion: Relationship between complexity, quality, and deliverability parameters were investigated with CCA. MU, SA related parameters and PTV volume were found to have strong effect on the plan quality and deliverability. The presented correlation among different quantified parameters could be used to improve the plan quality and the efficiency

Discrepancies between selected Pareto optimal plans and final deliverable plans in radiotherapy multi-criteria optimization.

Science.gov (United States)

Kyroudi, Archonteia; Petersson, Kristoffer; Ghandour, Sarah; Pachoud, Marc; Matzinger, Oscar; Ozsahin, Mahmut; Bourhis, Jean; Bochud, François; Moeckli, Raphaël

2016-08-01

Multi-criteria optimization provides decision makers with a range of clinical choices through Pareto plans that can be explored during real time navigation and then converted into deliverable plans. Our study shows that dosimetric differences can arise between the two steps, which could compromise the clinical choices made during navigation. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Assessment Report Sandia National Laboratories Fuel Cycle Technologies Quality Assurance Evaluation of FY15 SNL FCT M2 Milestone Deliverables

International Nuclear Information System (INIS)

Appel, Gordon John

2016-01-01

Sandia National Laboratories (SNL) Fuel Cycle Technologies (FCT) program activities are conducted in accordance with FCT Quality Assurance Program Document (FCT-QAPD) requirements. The FCT-QAPD interfaces with SNL approved Quality Assurance Program Description (SNL-QAPD) as explained in the Sandia National Laboratories QA Program Interface Document for FCT Activities (Interface Document). This plan describes SNL's FY16 assessment of SNL's FY15 FCT M2 milestone deliverable's compliance with program QA requirements, including SNL R&A requirements. The assessment is intended to confirm that SNL's FY15 milestone deliverables contain the appropriate authenticated review documentation and that there is a copy marked with SNL R&A numbers.

Assessment Report Sandia National Laboratories Fuel Cycle Technologies Quality Assurance Evaluation of FY15 SNL FCT M2 Milestone Deliverables

Energy Technology Data Exchange (ETDEWEB)

Appel, Gordon John [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2016-05-01

Sandia National Laboratories (SNL) Fuel Cycle Technologies (FCT) program activities are conducted in accordance with FCT Quality Assurance Program Document (FCT-QAPD) requirements. The FCT-QAPD interfaces with SNL approved Quality Assurance Program Description (SNL-QAPD) as explained in the Sandia National Laboratories QA Program Interface Document for FCT Activities (Interface Document). This plan describes SNL's FY16 assessment of SNL's FY15 FCT M2 milestone deliverable's compliance with program QA requirements, including SNL R&A requirements. The assessment is intended to confirm that SNL's FY15 milestone deliverables contain the appropriate authenticated review documentation and that there is a copy marked with SNL R&A numbers.

Critical Values for Lawshe's Content Validity Ratio: Revisiting the Original Methods of Calculation

Science.gov (United States)

Ayre, Colin; Scally, Andrew John

2014-01-01

The content validity ratio originally proposed by Lawshe is widely used to quantify content validity and yet methods used to calculate the original critical values were never reported. Methods for original calculation of critical values are suggested along with tables of exact binomial probabilities.

Validating the breeding value for maternal preweaning gain in beef ...

African Journals Online (AJOL)

The objective of this research was to validate the maternal breeding value for preweaning gain as a predictor of genetic differences in milk production. Phenotypic variation in preweaning gain and in milk production measured by the weigh-suckle-weigh method was partitioned into genetic and non-genetic components.

Validation of Theory of Consumption Values Scales for Deal Sites

DEFF Research Database (Denmark)

Sudzina, Frantisek

2016-01-01

Deal sites became a widely used artefact. But there is still only a limited number of papers investigating their adoption and use. Most of the research published on the topic is qualitative. It is typical for an early stage of investigation of any new artefact. The Theory of Consumption Values ex...... explains purchase behavior. The aim of this paper is to validate scales for the Theory of Consumption Values for deal sites. This should pave a way for quantitative investigation of motives for purchasing using deal sites....

Measuring Children's Environmental Attitudes and Values in Northwest Mexico: Validating a Modified Version of Measures to Test the Model of Ecological Values (2-MEV)

Science.gov (United States)

Schneller, A. J.; Johnson, B.; Bogner, F. X.

2015-01-01

This paper describes the validation process of measuring children's attitudes and values toward the environment within a Mexican sample. We applied the Model of Ecological Values (2-MEV), which has been shown to be valid and reliable in 20 countries, including one Spanish speaking culture. Items were initially modified to fit the regional dialect,…

Dosimetric quality, accuracy, and deliverability of modulated radiotherapy treatments for spinal metastases

Energy Technology Data Exchange (ETDEWEB)

Kairn, Tanya, E-mail: t.kairn@gmail.com [Genesis Cancer Care Queensland, Auchenflower (Australia); School of Chemistry, Physics, and Mechanical Engineering, Queensland University of Technology, Brisbane (Australia); Papworth, Daniel [Genesis Cancer Care Queensland, Auchenflower (Australia); Crowe, Scott B. [School of Chemistry, Physics, and Mechanical Engineering, Queensland University of Technology, Brisbane (Australia); Cancer Care Services, Royal Brisbane and Women' s Hospital, Herston (Australia); Anderson, Jennifer [Genesis Cancer Care Queensland, Auchenflower (Australia); Christie, David R.H. [Genesis Cancer Care Queensland, Auchenflower (Australia); School of Medicine, Bond University, Robina (Australia)

2016-10-01

Cancer often metastasizes to the vertebra, and such metastases can be treated successfully using simple, static posterior or opposed-pair radiation fields. However, in some cases, including when re-irradiation is required, spinal cord avoidance becomes necessary and more complex treatment plans must be used. This study evaluated 16 sample intensity-modulated radiation therapy (IMRT) and volumetric-modulated arc therapy (VMAT) treatment plans designed to treat 6 typical vertebral and paraspinal volumes using a standard prescription, with the aim of investigating the advantages and limitations of these treatment techniques and providing recommendations for their optimal use in vertebral treatments. Treatment plan quality and beam complexity metrics were evaluated using the Treatment And Dose Assessor (TADA) code. A portal-imaging–based quality assurance (QA) system was used to evaluate treatment delivery accuracy, and radiochromic film measurements were used to provide high-resolution verification of treatment plan dose accuracy, especially in the steep dose gradient regions between each vertebral target and spinal cord. All treatment modalities delivered approximately the same doses and the same levels of dose heterogeneity to each planning target volume (PTV), although the minimum PTV doses in the vertebral plans were substantially lower than the prescription, because of the requirement that the plans meet a strict constraint on the dose to the spinal cord and cord planning risk volume (PRV). All plans met required dose constraints on all organs at risk, and all measured PTV-cord dose gradients were steeper than planned. Beam complexity analysis suggested that the IMRT treatment plans were more deliverable (less complex, leading to greater QA success) than the VMAT treatment plans, although the IMRT plans also took more time to deliver. The accuracy and deliverability of VMAT treatment plans were found to be substantially increased by limiting the number of

Rethinking the Business Model in Construction by the Use of Off-Site System Deliverance: Case of the Shaft Project

DEFF Research Database (Denmark)

Thuesen, Christian; Hvam, Lars

2013-01-01

This paper presents a set of insights to be used in the development of business models for off-site system deliveries contributing to the development of Off-Site Manufacturing practices (OSM). The theoretical offset for discussing the development of business models is the blue ocean strategy...... of installation shafts. Findings from the development and production of the installation shaft show that system deliveries represent a promising strategy for moving from red ocean competitive environment with the predominant cost+ business model, to a blue ocean situation in which the competition emerges...... in the constant pursue of value creation and cost reduction. On the basis of that system deliverances represent a promising strategy in the future development and application of off-site manufacturing practices. The application of system deliveries is however demanding as it represents a fundamental shift...

Shuttle orbiter Ku-band radar/communications system design evaluation. Deliverable test equipment evaluation

Science.gov (United States)

Maronde, R. G.

1980-07-01

The Ku-band test equipment, known as the Deliverable System Test equipment (DSTE), is reviewed and evaluated. The DSTE is semiautomated and computer programs were generated for 14 communication mode tests and 17 radar mode tests. The 31 test modules provide a good cross section of tests with which to exercise the Ku-band system; however, it is very limited when being used to verify Ku-band system performance. More detailed test descriptions are needed, and a major area of concern is the DSTE sell-off procedure which is inadequate.

'Archers' of the Blessed City: City's Deliverance in the Coinage of Early Hellenistic Olbia

DEFF Research Database (Denmark)

Stolba, Vladimir

2015-01-01

Despite continuous and thorough studies of Olbian coinage, the chronology of some coin series produced by this Pontic city and the messages communicated by their types remain obscure. One such controversial issue, standing out from the total mass, is the so-called ‘archers’, the early Hellenistic...... with the major turning point in the city’s history, namely its deliverance from the siege laid by Macedonian troops in the course of Zopyrion’s campaign against the Scythians around 331 BC....

A Validity and Reliability Study on the Development of the Values Scale in Turkey

Science.gov (United States)

Dilmac, Bulent; Aricak, Osman Tolga; Cesur, Sevim

2014-01-01

The purpose of the present study is to examine the initial psychometric properties of the Values Scale for adults. While developing the first stage of the Values Scale, open-ended data on the values held by 216 university students were obtained. During the second stage, the validity and reliability studies of the 60-item Values Scale obtained by…

Bioclim Deliverable D7: continuous climate evolution scenarios over western Europe (1000 km scale)

International Nuclear Information System (INIS)

2003-01-01

The overall aim of BIOCLIM is to assess the possible long term impacts due to climate change on the safety of radioactive waste repositories in deep formations. This aim is addressed through the following specific objectives: - Development of practical and innovative strategies for representing sequential climatic changes to the geosphere-biosphere system for existing sites over central Europe, addressing the timescale of one million years, which is relevant to the geological disposal of radioactive waste. - Exploration and evaluation of the potential effects of climate change on the nature of the biosphere systems used to assess the environmental impact. - Dissemination of information on the new methodologies and the results obtained from the project among the international waste management community for use in performance assessments of potential or planned radioactive waste repositories. A key point of the project is therefore to develop strategies for representing sequential long-term climatic changes by addressing time scales of relevance to geological disposal of solid radioactive wastes. The integrated strategy, which first step is described in this deliverable (D7), consists of building an integrated, dynamic climate model, to represent all the known important mechanisms for long term climatic variations. The time-dependent results will then be interpreted in terms of regional climate using rule-based and statistical down-scaling approaches. Therefore, the continuous simulation of the climate evolution of the next 200 000 years selected for study is a major objective of the BIOCLIM project. This requires models that account for the simultaneous evolution of the atmosphere, biosphere, land-ice and the ocean. To be able to perform several 200 000-yearlong transient climate simulations, the models have to include all these components, but also need to be simple enough to run fast. Therefore, climate models of intermediate complexity have been chosen to

The ethical hack a framework for business value penetration testing

CERN Document Server

Tiller, James S

2004-01-01

INTRODUCTIONPerspectives of ValueSECURITY AND HACKINGInformation SecuritySecurity ArchitectureHacking ImpactsTHE FRAMEWORKBusiness Planning and OperationsReconnaissanceEnumerationVulnerability AnalysisExploitationFinal AnalysisDeliverableIntegration INFORMATION SECURITY PROGRAMScope of Information Security ProgramsThe Process of Information SecurityComponent Parts of Information Security ProgramsBUSINESS PLANNING AND OPERATIONSBusiness ObjectivesSecurity PolicyPrevious Test ResultsBusiness ChallengesThe Business of SecurityReasoningOverall ExpectationsHow Deep is Deep Enough?Timing is Everythi

Deliverable 3.3.2 Specification of tests and test groups

DEFF Research Database (Denmark)

Peterson, Carrie Beth; Mitseva, Anelia; Harpur, Jill

2009-01-01

Deliverable 3.3.2: Specification of tests and test groups One of the main goals of the ISISEMD project is to offer innovative ICT services to improve the quality of life of elderly persons with cognitive problems or mild dementia and their informal and formal caregivers who provide every day care...... for them. This will be done via integrating intelligent scalable ICT services which will be tested for a period of 12 months under realistic conditions. Offering the services could not be complete without evaluating quality of life improvement, user acceptance and user satisfaction with a representative...... group of the target user groups. This document is devoted to describing important aspects of services evaluation such as: who the test participants will be, inclusion and exclusion criterion, selection standards, how the test participants will be recruited, ethical considerations, etc. Test methodology...

SiteChar. Characterisation of European CO2 storage. Deliverable D8.1. Qualitative and quantitative social site characterisations

Energy Technology Data Exchange (ETDEWEB)

Brunsting, S.; Pol, M.; Paukovic, M. [ECN Policy Studies, Energy research Centre of the Netherlands ECN, Amsterdam (Netherlands); Kaiser, M.; Zimmer, R. [Unabhaengiges Institut fuer Umweltfragen UfU, Berlin (Germany); Shackley, S.; Mabon, L. [Scottish Carbon Capture and Storage SCCS, Edinburg, Scotland (United Kingdom); Hepplewhite, F.; Loveridge, R. [Energy Markets Unit, Scottish Government, Edinburg, Scotland (United Kingdom); Mazurowski, M.; Polak-Osiniak, D. [Polish Oil and Gas Company PGNiG, Warszawa (Poland); Rybicki, C. [AGH University of Science and Technology, Krakow (Poland)

2012-10-15

At local level, public support has proven crucial to the implementation of CO2 capture and storage (CCS) demonstration projects. Whereas no method exists to guarantee public acceptability of any project, a constructive stakeholder engagement process does increase the likelihood thereof. Social site characterisation can be used as an instrument to explore, plan and evaluate a process of active and constructive local stakeholder engagement in a prospective CCS project as a parallel activity to technical site characterisation. It roughly consists of a formative research phase to get acquainted with the area followed by a series of public information and engagement activities. This deliverable presents results from the first phase for the social site characterisations of a prospective CCS site in Poland (onshore) and the UK (offshore), using qualitative as well as quantitative research methods, as a first step to planning of local public engagement activities and evaluation of these activities that will be undertaken by this consortium at both sites in the near future. Although the term social site characterisation actually refers to the entire process of formative research and subsequent public outreach, and hence to the complete package of awareness work undertaken as part of SiteChar, in the present deliverable the term only refers to the formative research activities as undertaken up to now and as described in this deliverable. The qualitative part of the social site characterisation consisted of (1) a description of relevant social site characteristics such as local history; (2) interviews with relevant local stakeholders; (3) a media analysis of local newspapers. The quantitative part of the social site characterisation consisted of surveys using representative samples to characterise the local population in terms of awareness, knowledge and perceptions of CCS, felt involvement in decision making, extent of local activism, level of trust in representatives and

Multidimensional correlation among plan complexity, quality and deliverability parameters for volumetric-modulated arc therapy using canonical correlation analysis.

Science.gov (United States)

Shen, Lanxiao; Chen, Shan; Zhu, Xiaoyang; Han, Ce; Zheng, Xiaomin; Deng, Zhenxiang; Zhou, Yongqiang; Gong, Changfei; Xie, Congying; Jin, Xiance

2018-03-01

A multidimensional exploratory statistical method, canonical correlation analysis (CCA), was applied to evaluate the impact of complexity parameters on the plan quality and deliverability of volumetric-modulated arc therapy (VMAT) and to determine parameters in the generation of an ideal VMAT plan. Canonical correlations among complexity, quality and deliverability parameters of VMAT, as well as the contribution weights of different parameters were investigated with 71 two-arc VMAT nasopharyngeal cancer (NPC) patients, and further verified with 28 one-arc VMAT prostate cancer patients. The average MU and MU per control point (MU/CP) for two-arc VMAT plans were 702.6 ± 55.7 and 3.9 ± 0.3 versus 504.6 ± 99.2 and 5.6 ± 1.1 for one-arc VMAT plans, respectively. The individual volume-based 3D gamma passing rates of clinical target volume (γCTV) and planning target volume (γPTV) for NPC and prostate cancer patients were 85.7% ± 9.0% vs 92.6% ± 7.8%, and 88.0% ± 7.6% vs 91.2% ± 7.7%, respectively. Plan complexity parameters of NPC patients were correlated with plan quality (P = 0.047) and individual volume-based 3D gamma indices γ(IV) (P = 0.01), in which, MU/CP and segment area (SA) per control point (SA/CP) were weighted highly in correlation with γ(IV) , and SA/CP, percentage of CPs with SA plan quality with coefficients of 0.98, 0.68 and -0.99, respectively. Further verification with one-arc VMAT plans demonstrated similar results. In conclusion, MU, SA-related parameters and PTV volume were found to have strong effects on the plan quality and deliverability.

Ensuring on-time quality data management deliverables from global clinical data management teams

Directory of Open Access Journals (Sweden)

Zia Haque

2010-01-01

Full Text Available The growing emphasis on off-site and off-shore clinical data management activities mandates a paramount need for adequate solutions geared toward on-time, quality deliverables. The author has been leading large teams that have been involved in successful global clinical data management endeavors. While each study scenario is unique and has to be approached as such, there are several elements in defining strategy and team structure in global clinical data management that can be applied universally. In this article, key roles, practices, and high-level procedures are laid out as a road map to ensure success with the model.

Summary of FY 17 Assessments Sandia National Laboratories: Evaluation of FY16 SNL FCT M2 Milestone Deliverables

Energy Technology Data Exchange (ETDEWEB)

Appel, Gordon John

2017-03-01

This report is the milestone deliverable M4FT-17SN111102091 “Summary of Assessments Performed FY17 by SNL QA POC” for work package FT-17SN11110209 titled “Quality Assurance – SNL”. This report summarizes the FY17 assessment performed on Fuel Cycle Technologies / Spent Fuel and Waste Disposition efforts.

Accuracies of genomic breeding values in American Angus beef cattle using K-means clustering for cross-validation.

Science.gov (United States)

Saatchi, Mahdi; McClure, Mathew C; McKay, Stephanie D; Rolf, Megan M; Kim, JaeWoo; Decker, Jared E; Taxis, Tasia M; Chapple, Richard H; Ramey, Holly R; Northcutt, Sally L; Bauck, Stewart; Woodward, Brent; Dekkers, Jack C M; Fernando, Rohan L; Schnabel, Robert D; Garrick, Dorian J; Taylor, Jeremy F

2011-11-28

Genomic selection is a recently developed technology that is beginning to revolutionize animal breeding. The objective of this study was to estimate marker effects to derive prediction equations for direct genomic values for 16 routinely recorded traits of American Angus beef cattle and quantify corresponding accuracies of prediction. Deregressed estimated breeding values were used as observations in a weighted analysis to derive direct genomic values for 3570 sires genotyped using the Illumina BovineSNP50 BeadChip. These bulls were clustered into five groups using K-means clustering on pedigree estimates of additive genetic relationships between animals, with the aim of increasing within-group and decreasing between-group relationships. All five combinations of four groups were used for model training, with cross-validation performed in the group not used in training. Bivariate animal models were used for each trait to estimate the genetic correlation between deregressed estimated breeding values and direct genomic values. Accuracies of direct genomic values ranged from 0.22 to 0.69 for the studied traits, with an average of 0.44. Predictions were more accurate when animals within the validation group were more closely related to animals in the training set. When training and validation sets were formed by random allocation, the accuracies of direct genomic values ranged from 0.38 to 0.85, with an average of 0.65, reflecting the greater relationship between animals in training and validation. The accuracies of direct genomic values obtained from training on older animals and validating in younger animals were intermediate to the accuracies obtained from K-means clustering and random clustering for most traits. The genetic correlation between deregressed estimated breeding values and direct genomic values ranged from 0.15 to 0.80 for the traits studied. These results suggest that genomic estimates of genetic merit can be produced in beef cattle at a young age but

Development and validation of a measure of food choice values.

Science.gov (United States)

Lyerly, Jordan E; Reeve, Charlie L

2015-06-01

Food choice values (FCVs) are factors that individuals consider when deciding which foods to purchase and/or consume. Given the potentially important implications for health, it is critical for researchers to have access to a validated measure of FCV. Though there is an existing measure of FCV, this measure was developed 20 years ago and recent research suggests additional FCVs exist that are not included in this measure. A series of four studies was conducted to develop a new expanded measure of FCV. An eight-factor model of FCV was supported and confirmed. In aggregate, results from the four studies indicate that the measure is content valid, and has internally consistent scales that also demonstrated acceptable temporal stability and convergent validity. In addition, the eight scales of the measures were independent of social desirability, met criteria for measurement invariance across income groups, and predicted dietary intake. The development of this new measure of FCV may be useful for researchers examining FCVs (FCVs) in the future, as well as for use in intervention and prevention efforts targeting dietary choices. Copyright © 2015 Elsevier Ltd. All rights reserved.

Accuracies of genomic breeding values in American Angus beef cattle using K-means clustering for cross-validation

Directory of Open Access Journals (Sweden)

Saatchi Mahdi

2011-11-01

Full Text Available Abstract Background Genomic selection is a recently developed technology that is beginning to revolutionize animal breeding. The objective of this study was to estimate marker effects to derive prediction equations for direct genomic values for 16 routinely recorded traits of American Angus beef cattle and quantify corresponding accuracies of prediction. Methods Deregressed estimated breeding values were used as observations in a weighted analysis to derive direct genomic values for 3570 sires genotyped using the Illumina BovineSNP50 BeadChip. These bulls were clustered into five groups using K-means clustering on pedigree estimates of additive genetic relationships between animals, with the aim of increasing within-group and decreasing between-group relationships. All five combinations of four groups were used for model training, with cross-validation performed in the group not used in training. Bivariate animal models were used for each trait to estimate the genetic correlation between deregressed estimated breeding values and direct genomic values. Results Accuracies of direct genomic values ranged from 0.22 to 0.69 for the studied traits, with an average of 0.44. Predictions were more accurate when animals within the validation group were more closely related to animals in the training set. When training and validation sets were formed by random allocation, the accuracies of direct genomic values ranged from 0.38 to 0.85, with an average of 0.65, reflecting the greater relationship between animals in training and validation. The accuracies of direct genomic values obtained from training on older animals and validating in younger animals were intermediate to the accuracies obtained from K-means clustering and random clustering for most traits. The genetic correlation between deregressed estimated breeding values and direct genomic values ranged from 0.15 to 0.80 for the traits studied. Conclusions These results suggest that genomic estimates

Validation of the Professional Identity and Values Scale Among an Athletic Trainer Population.

Science.gov (United States)

Eason, Christianne M; Mazerolle, Stephanie M; Denegar, Craig R; Burton, Laura; McGarry, Jennifer

2018-01-01

  Forming a professional identity is a process by which an individual achieves an awareness of his or her own self-concept in the context of the profession. Identity in relation to an individual's profession includes the ability to articulate one's role as a professional and professional philosophy. Professional identity has been studied extensively in other fields, but currently no professional identity scales have been validated within the athletic training profession.   To validate the Professional Identity and Values Scale (PIVS) among an athletic trainer population.   Cross-sectional study.   Web-based questionnaire.   Athletic trainers employed in National Collegiate Athletic Association Division I, II, III, or National Association of Intercollegiate Athletics colleges or universities (n = 299, 56.5% female, 43.5% male). The average age of the participants was 33.6 ± 8.3 years, and they had 10.3 ± 7.6 years of experience.   Participants were asked to complete a demographic questionnaire and the 32-item PIVS. The variables included demographics and the PIVS (Professional Orientation and Values subscale [18 items] and the Professional Development subscale [14 items]).   Exploratory factor analysis reduced the survey from 32 to 20 items and revealed 6 factors. Three factors emerged from the Professional Development subscale and emphasized professional insecurities during the early career stages, the importance of mentors during the intermediate stages, and self-confidence and awareness during the later stages of professional development. An additional 3 factors emerged from the Professional Orientation and Values subscale: (1) patient care and advocacy, (2) professional engagement and collaboration, and (3) personal wellness and values. A Cronbach α of 0.80 indicated good internal consistency.   A modified PIVS is a valid and reliable measure of professional identity among athletic trainers employed in the collegiate setting.

Measuring Nursing Value from the Electronic Health Record.

Science.gov (United States)

Welton, John M; Harper, Ellen M

2016-01-01

We report the findings of a big data nursing value expert group made up of 14 members of the nursing informatics, leadership, academic and research communities within the United States tasked with 1. Defining nursing value, 2. Developing a common data model and metrics for nursing care value, and 3. Developing nursing business intelligence tools using the nursing value data set. This work is a component of the Big Data and Nursing Knowledge Development conference series sponsored by the University Of Minnesota School Of Nursing. The panel met by conference calls for fourteen 1.5 hour sessions for a total of 21 total hours of interaction from August 2014 through May 2015. Primary deliverables from the bit data expert group were: development and publication of definitions and metrics for nursing value; construction of a common data model to extract key data from electronic health records; and measures of nursing costs and finance to provide a basis for developing nursing business intelligence and analysis systems.

Anti-pancreatic cancer deliverables from sea: first-hand evidence on the efficacy, molecular targets and mode of action for multifarious polyphenols from five different brown-algae.

Directory of Open Access Journals (Sweden)

Sheeja Aravindan

Full Text Available Pancreatic cancer (PC remains the fourth leading cause of cancer death with an unacceptable survival that has remained relatively unchanged over the past 25 years. The presence of occult or clinical metastases at the time of diagnosis together with the lack of effective chemotherapies pose a dire need for designing new and targeted therapeutic deliverables that favors the clinical outcome. Herein, we investigated the anti-tumorigenic potential of polyphenols from five different brown-algae in human PC cells (MiaPaCa-2, Panc-1, BXPC-3 and Panc-3.27. Total anti-oxidant capacity (TAC analysis on stepwise polyphenol separations with increasing polarity (Hexane-DCM-EA-methanol identified high levels of TAC in DCM and EA extractions across all seaweeds assessed. All DCM and EA separated polyphenols induced a dose-dependent and sustained (time-independent inhibition of cell proliferation and viability. Further, these polyphenols profoundly enhanced DNA damage (acridine orange/Ethidium bromide staining and DNA fragmentation in all the cell lines investigated. More importantly, luciferase reporter assay revealed a significant inhibition of NFκB transcription in cells treated with polyphenols. Interestingly, QPCR analysis identified a differential yet definite regulation of pro-tumorigenic EGFR, VEGFA, AKT, hTERT, kRas, Bcl2, FGFα and PDGFα transcription in cells treated with DCM and EA polyphenols. Immunoblotting validates the inhibitory potential of seaweed polyphenols in EGFR phosphorylation, kRas, AurKβ and Stat3. Together, these data suggest that intermediate polarity based fractions of seaweed polyphenols may significantly potentiate tumor cell killing and may serve as potential drug deliverable for PC cure. More Studies dissecting out the active constituents in potent fractions, mechanisms of action and synergism, if any, are warranted and are currently in process.

Towards transparent, proportionate and deliverable regulation for geological disposal

International Nuclear Information System (INIS)

2010-01-01

As part of its activities, the Regulators' Forum of the NEA Radioactive Waste Management Committee has been examining the regulatory criteria for the long-term performance of geological disposal. In this context, it organised a workshop entitled 'Towards Transparent, Proportionate and Deliverable Regulation for Geological Disposal', which served to verify current status and needs. Participants included regulators, implementers, policy makers, R and D specialists and academics. Themes addressed included duties to future generations, timescales for regulation, stepwise decision making, roles of optimisation and best available techniques (BAT), multiple lines of reasoning, safety and performance indicators, recognition of uncertainties and the importance of stakeholder interactions. The workshop highlighted the significant amount of work accomplished over the past decade, but also identified important differences between national regulations even if these are not in contradiction with international guidance. Also highlighted was the importance of R and D carried out on behalf of the regulator. In addition to the contributed papers, these proceedings trace the numerous discussions that formed an integral part of the workshop. They constitute an important and unique documentary basis for researchers and radioactive waste management specialists

Preliminary guidelines for priority setting between measures, Deliverable 3.4 of the H2020 project SafetyCube (Safety CaUsation, Benefits and Efficiency).

NARCIS (Netherlands)

Martensen, H. Van den Berghe, W. Wijnen, W. Weijermars, W.A.M. Carnis, L. & Elvik, R.

2017-01-01

The present deliverable describes the economic assessment of counter measures. Cost-effectiveness analysis and cost-utility analysis are compared to cost-benefit analysis. Cost-effectiveness analysis helps to estimate the costs per prevented fatality or injury. To evaluate the effectiveness in terms

How the NDA Provides Transparency and Visibility of the Technical Deliverability of the R and D Programme - 13303

International Nuclear Information System (INIS)

Seed, Ian; James, Paula; Brownridge, Melanie; McMinn, Mervin

2013-01-01

The Nuclear Decommissioning Authority (NDA) was created under the UK Energy Act 2004 to ensure the UK historic civil public sector nuclear legacy sites are decommissioned safely, securely, cost effectively and in ways that protect the environment. The delivery will involve carrying out many unique projects within a high hazard environment requiring the very highest standards in safety, security and environmental management. Unique problems require unique solutions and there is a substantial amount of research and development required for each project. The NDA's R and D strategic objective is to ensure that delivery of the NDA's mission is technically underpinned by sufficient and appropriate research and development. This drives a requirement to provide transparency and visibility of the technical deliverability of the programme through the technical baseline and accompanying research and development requirements. The NDA need to have confidence in the technical deliverability of the Site License Companies (SLCs) plans, provide overall visibility of R and D across the NDA Estate and ensure that appropriate R and D is being carried out in a timely manner. They need to identify where coordinated R and D programmes may be advantageous as a result of common needs, risks and opportunities and ensure key R and D needs across NDA are identified, prioritised and work programmes are costed and scheduled in the Lifetime Plans for individual sites and SLCs. Evidence of the Site License Company's approach and their corresponding technical underpinning programmes is achieved through submission of a number of outputs collectively known as TBuRDs (Technical Baseline and Underpinning Research and Development Requirements). This paper is a summary of the information generated by an independent review of those TBuRDs. It highlights some of the key messages, synergies and common R and D activities across the estate. It demonstrates the value of a consistent approach to collecting R

Supply chain integration scales validation and benchmark values

Directory of Open Access Journals (Sweden)

Juan A. Marin-Garcia

2013-06-01

Full Text Available Purpose: The clarification of the constructs of the supply chain integration (clients, suppliers, external and internal, the creation of a measurement instrument based on a list of items taken from earlier papers, the validation of these scales and a preliminary benchmark to interpret the scales by percentiles based on a set of control variables (size of the plant, country, sector and degree of vertical integration. Design/methodology/approach: Our empirical analysis is based on the HPM project database (2005-2007 timeframe. The international sample is made up of 266 plants across ten countries: Austria, Canada, Finland, Germany, Italy, Japan, Korea, Spain, Sweden and the USA. In each country. We analized the descriptive statistics, internal consistency testing to purify the items (inter-item correlations, Cronbach’s alpha, squared multiple correlation, corrected item-total correlation, exploratory factor analysis, and finally, a confirmatory factor analysis to check the convergent and discriminant validity of the scales. The analyses will be done with the SPSS and EQS programme using the maximum likelihood parameter estimation method. Findings: The four proposed scales show excellent psychometric properties. Research limitations/implications: with a clearer and more concise designation of the supply chain integration measurement scales more reliable and accurate data could be taken to analyse the relations between these constructs with other variables of interest to the academic l fields. Practical implications: providing scales that are valid as a diagnostic tool for best practices, as well as providing a benchmark with which to compare the score for each individual plant against a collection of industrial companies from the machinery, electronics and transportation sectors. Originality/value: supply chain integration may be a major factor in explaining the performance of companies. The results are nevertheless inconclusive, the vast range

Construct validity of SF-6D health state utility values in an employed population.

Science.gov (United States)

Baxter, Siyan; Sanderson, Kristy; Venn, Alison; Otahal, Petr; Palmer, Andrew J

2015-04-01

Health utility values permit cost utility analysis in workplace health promotion; however, utility measures of working populations have not been validated. To investigate construct validity of SF-6D health utility in a public service workforce. SF-12v2 Health Survey was administered to 3,408 randomly selected public service employees in Australia in 2010. SF-12 scores were converted to SF-6D health utility values. Associations and correlates of SF-6D with health, socio-demographic and work characteristics [comorbidities, body mass index (BMI), Kessler-10 psychological distress (K10), education, salary, effort-reward imbalance (ERI), absenteeism] were explored. Ceiling effects were analysed. Nationally representative employee SF-6D values from the Household, Income and Labour Dynamics in Australia (HILDA) survey (n = 11,234) were compared. All analyses were stratified by sex. Mean (SE) age was 45.7 (0.35) males; 44.5 (0.22) females. Females represented 72 % of the sample. Mean (SE) health utility 0.792 (0.004); 0.771 (0.003) was higher in males. SF-6D demonstrated both a significant inverse association (p negative correlations (female; male) with K10 (r = -0.63; r = -0.66), comorbidity count (r = -0.40; r = -0.33), ERI (r = -0.37; r = -0.34) and absenteeism (p imbalance and absenteeism are negatively associated with employee health. SF-6D is a valid measure of perceived health states in working populations.

Deliverable 7.1: Legal Framework and Legal Barriers to an Offshore HVDC Electricity Grid in the North Sea : Intermediate Report for Stakeholder Review

NARCIS (Netherlands)

Nieuwenhout, C.T.

The present deliverable elaborates the current legal framework for offshore wind and grid development on international, European and national level. It is shown that often, the legal framework needs to be adapted in order to facilitate the development of a meshed offshore electricity grid. This is

Identification of road user related risk factors, Deliverable 5.1 of the H2020 project SafetyCube (Safety CaUsation, Benefits and Efficiency).

NARCIS (Netherlands)

Filtness, A. & Papadimitriou, E. (Eds.) Leskovšek, B. Focant, N. Martensen, H. Sgarra, V. Usami, D.S. Soteropoulos, A. Stadlbauer, S. Theofilatos, A. Yannis, G. Ziakopoulos, A. Diamandouros, K. Durso, C. Goldenbeld, C. Loenis, B. Schermers, G. Petegem, J.-H. van Elvik, R. Hesjevoll, I.S. Quigley, C. & Papazikou, E.

2017-01-01

The present Deliverable (D5.1) describes the identification and evaluation of infrastructure related risk factors. It outlines the results of Task 5.1 of WP5 of SafetyCube, which aimed to identify and evaluate infrastructure related risk factors and related road safety problems by (i) presenting a

The validity and reliability of value-added and target-setting procedures with special reference to Key Stage 3

OpenAIRE

Moody, Ian Robin

2003-01-01

The validity of value-added systems of measurement is crucially dependent upon there being a demonstrably unambiguous relationship between the so-called baseline, or intake measures, and any subsequent measure of performance at a later stage. The reliability of such procedures is dependent on the relationships between these two measures being relatively stable over time. A number of questions arise with regard to both the validity and reliability of value-added procedures at any level in educ...

The reliability, validity, sensitivity, specificity and predictive values of the Chinese version of the Rowland Universal Dementia Assessment Scale.

Science.gov (United States)

Chen, Chia-Wei; Chu, Hsin; Tsai, Chia-Fen; Yang, Hui-Ling; Tsai, Jui-Chen; Chung, Min-Huey; Liao, Yuan-Mei; Chi, Mei-Ju; Chou, Kuei-Ru

2015-11-01

The purpose of this study was to translate the Rowland Universal Dementia Assessment Scale into Chinese and to evaluate the psychometric properties (reliability and validity) and the diagnostic properties (sensitivity, specificity and predictive values) of the Chinese version of the Rowland Universal Dementia Assessment Scale. The accurate detection of early dementia requires screening tools with favourable cross-cultural linguistic and appropriate sensitivity, specificity, and predictive values, particularly for Chinese-speaking populations. This was a cross-sectional, descriptive study. Overall, 130 participants suspected to have cognitive impairment were enrolled in the study. A test-retest for determining reliability was scheduled four weeks after the initial test. Content validity was determined by five experts, whereas construct validity was established by using contrasted group technique. The participants' clinical diagnoses were used as the standard in calculating the sensitivity, specificity, positive predictive value and negative predictive value. The study revealed that the Chinese version of the Rowland Universal Dementia Assessment Scale exhibited a test-retest reliability of 0.90, an internal consistency reliability of 0.71, an inter-rater reliability (kappa value) of 0.88 and a content validity index of 0.97. Both the patients and healthy contrast group exhibited significant differences in their cognitive ability. The optimal cut-off points for the Chinese version of the Rowland Universal Dementia Assessment Scale in the test for mild cognitive impairment and dementia were 24 and 22, respectively; moreover, for these two conditions, the sensitivities of the scale were 0.79 and 0.76, the specificities were 0.91 and 0.81, the areas under the curve were 0.85 and 0.78, the positive predictive values were 0.99 and 0.83 and the negative predictive values were 0.96 and 0.91 respectively. The Chinese version of the Rowland Universal Dementia Assessment Scale

Risk of injury by driving with alcohol and other drugs. Driving under the Influence of Drugs, Alcohol and Medicines DRUID, Deliverable 2.3.5.

NARCIS (Netherlands)

Hels, T. Bernhoft, I.M. Lyckegaard, A. Houwing, S. Hagenzieker, M.P. Legrand, S.-A. Isalberti, C. Van der Linden, T. & Verstraete, A.

2011-01-01

The objective of this deliverable is to assess the risk of driving with alcohol, illicit drugs and medicines in various European countries. In total nine countries participated in the study on relative risk of serious injury/fatality while positive for psychoactive substances. Six countries

Bioclim Deliverable D8b: development of the physical/statistical down-scaling methodology and application to climate model Climber for BIOCLIM Work-package 3

International Nuclear Information System (INIS)

2003-01-01

The overall aim of BIOCLIM is to assess the possible long term impacts due to climate change on the safety of radioactive waste repositories in deep formations. The main aim of this deliverable is to provide time series of climatic variables at the high resolution as needed by performance assessment (PA) of radioactive waste repositories, on the basis of coarse output from the CLIMBER-GREMLINS climate model. The climatological variables studied here are long-term (monthly) mean temperature and precipitation, as these are the main variables of interest for performance assessment. CLIMBER-GREMLINS is an earth-system model of intermediate complexity (EMIC), designed for long climate simulations (glacial cycles). Thus, this model has a coarse resolution (about 50 degrees in longitude) and other limitations which are sketched in this report. For the purpose of performance assessment, the climatological variables are required at scales pertinent for the knowledge of the conditions at the depository site. In this work, the final resolution is that of the best available global gridded present-day climatology, which is 1/6 degree in both longitude and latitude. To obtain climate-change information at this high resolution on the basis of the climate model outputs, a 2-step down-scaling method is designed. First, physical considerations are used to define variables which are expected to have links which climatological values; secondly a statistical model is used to find the links between these variables and the high-resolution climatology of temperature and precipitation. Thus the method is termed as 'physical/statistical': it involves physically based assumptions to compute predictors from model variables and then relies on statistics to find empirical links between these predictors and the climatology. The simple connection of coarse model results to regional values can not be done on a purely empirical way because the model does not provide enough information - it is both

Bioclim Deliverable D4/5: global climatic characteristics, including vegetation and seasonal cycles over Europe, for snapshots over the next 200,000 years

International Nuclear Information System (INIS)

2003-01-01

The aim of the BIOCLIM project is to develop and present techniques that can be used to develop self-consistent patterns of possible future climate changes over the next million years (climate scenarios), and to demonstrate how these climate scenarios can be used in assessments of the long-term safety of nuclear waste repository sites. Within the project, two strategies are implemented to predict climate change. The first is the hierarchical strategy, in which a hierarchy of climate models is used to investigate the evolution of climate over the period of interest. These models vary from very simple 2-D and threshold models, which simulate interactions between only a few aspects of the earth system, through general circulation models (GCMs) and vegetation models, which simulate in great detail the dynamics and physics of the atmosphere, ocean, and biosphere, to regional models, which focus in particular on the European region and the specific areas of interest. The second strategy is the integrated strategy, in which intermediate complexity climate models are developed, and used to consecutively simulate the development of the earth system over many millennia. Although these models are relatively simple compared to a GCM, they are more advanced than 2D models, and do include physical descriptions of the biosphere, cryo-sphere, atmosphere and ocean. This deliverable, D4/5, focuses on the hierarchical strategy, and in particular the GCM and vegetation model simulation of possible future climates. Deliverable D3 documented the first step in this strategy. The Louvain-la-Neuve 2-D climate model (LLN-2D) was used to estimate (among other variables) annual mean temperatures and ice volume in the Northern Hemisphere over the next 1 million years. It was driven by the calculated evolution of orbital parameters, and plausible scenarios of CO 2 concentration. From the results, 3 future time periods within the next 200,000 years were identified as being extreme, that is

Validity of Basic Electronic 1 Module Integrated Character Value Based on Conceptual Change Teaching Model to Increase Students Physics Competency in STKIP PGRI West Sumatera

Science.gov (United States)

Hidayati, A.; Rahmi, A.; Yohandri; Ratnawulan

2018-04-01

The importance of teaching materials in accordance with the characteristics of students became the main reason for the development of basic electronics I module integrated character values based on conceptual change teaching model. The module development in this research follows the development procedure of Plomp which includes preliminary research, prototyping phase and assessment phase. In the first year of this research, the module is validated. Content validity is seen from the conformity of the module with the development theory in accordance with the demands of learning model characteristics. The validity of the construct is seen from the linkage and consistency of each module component developed with the characteristic of the integrated learning model of character values obtained through validator assessment. The average validation value assessed by the validator belongs to a very valid category. Based on the validator assessment then revised the basic electronics I module integrated character values based on conceptual change teaching model.

From Field Work to Deliverables. Experiences on the Tin House Courtyard Documentation

Science.gov (United States)

Bello Caballero, L.; Mezzino, D.; Federman, A.; Santana Quintero, M.

2017-08-01

The Tin House Courtyard is a property of the National Capital Commission (NCC) in Ottawa, Canada. The site is located within the `Mile of History', a historical route running from Parliament Hill to the Governor General's residence. Currently, existing assets are under intervention works that include several preservation and renewal actions. Within the broader project, one of the tasks before construction works started was the documentation of the set of facades. The Carleton Immersive Media Studio (CIMS) at Carleton University in Ottawa was commissioned by NCC to conduct the recording of the area. This paper describes the process undertaken from field work to the final deliverable to the client, as well as the issues faced in between. Nowadays, up to date surveying technologies have revolutionized the methodologies for cultural heritage documentation. In this regard, the recording strategy employed encompassed the use of photogrammetry, laser scanner, total station, as well as different pre and post processing software in order to generate the desired outcomes.

Standard values and relationship-specific validity of the Bielefeld Relationship Expectations Questionnaire (BFPE)

Science.gov (United States)

2010-01-01

Background The Bielefeld Partnership Expectations Questionnaire (BFPE) is a tool to assess attachment in the romantic relationships of adults. The attachment styles are operationalized as configuration patterns of scale scores. While convergent validity has already been investigated, discriminant validity is still lacking confirmation. Methods The present sample (n = 1509) is representative for the German population aged 18 to 50. The mean age was 34.6 years. Most of the participants lived in a relationship (77.3 %). Discriminant validity was analyzed using a marital quality questionnaire (PFB), a social support questionnaire (F-Soz-U K-14), and a life satisfaction questionnaire (FLZ). Results All the BFPE scales have a satisfying internal consistency between r = .79 and .86. Those individuals who showed a secure pattern, i.e. increased "Readiness for Self-Disclosure" and "Conscious Need for Care" as well as reduced "Fear of Rejection" experienced their partner as socially supportive, reported higher marital quality in all of its facets, and were more satisfied within the life-domains "family/children" and "relationship/sexuality". Standard values for each scale are presented. Conclusions The BFPE has repeatedly been verified as a short, reliable, and valid instrument applicable to research practice with healthy individuals as well as within clinical contexts. PMID:20942905

Report of Case Studies on Gender Equality as a Focus Point of National and Nativist Discourses (Deliverable 9.7)

OpenAIRE

Siim, Birte; Kriszan, Andrea; Ámon, Kata; Knijn, Trudie; Broek, Hans Peter van den; Caponia, Tiziana; Gal, John; Halevy, Dana; Sipic, Josip; Unger, Brigitte

2016-01-01

The overall aim of WP9.7 is to analyse ‘cross-national case studies on gender equality as the focus of national and nativist discourses’. This deliverable is based on the national reports on the rhetoric of populist radical right parties from the seven selected countries, i.e. Croatia, Denmark, the Netherlands, Hungary, Germany, Italy and Spain, together with Israel. The objective of this synthesis report is to identify similarities and divergences in framing migration, mobility, gender and f...

Value-Added Models for Teacher Preparation Programs: Validity and Reliability Threats, and a Manageable Alternative

Science.gov (United States)

Brady, Michael P.; Heiser, Lawrence A.; McCormick, Jazarae K.; Forgan, James

2016-01-01

High-stakes standardized student assessments are increasingly used in value-added evaluation models to connect teacher performance to P-12 student learning. These assessments are also being used to evaluate teacher preparation programs, despite validity and reliability threats. A more rational model linking student performance to candidates who…

CO2-emission trading and green markets for renewable electricity. Wilmar - deliverable 4.1

DEFF Research Database (Denmark)

Azuma-Dicke, N.; Morthorst, Poul Erik; Ravn, H.F.

2004-01-01

This report is Deliverable 4.1 of the EU project “Wind Power Integration in Liberalised Electricity Markets” (WILMAR) and describes the application of two policy instruments, Tradable Emissions Permits (TEP’s) and Tradable Green Certificates (TGC’s) forelectricity produced from renewable energy...... sources in the European Union and the implications for implementation in the Wilmar model. The introduction of a common emission-trading system in the EU is expected to have an upward effect on the spot pricesat the electricity market. The variations of the spot price imply that some types of power...... generation may change the situation from earning money to losing money despite the increasing spot price. Heavy restrictions on emissions penalise thefossil-fuelled technologies significantly, and the associated increase in the spot price need not compensate for this. Therefore, a market of TEP’s is expected...

Measuring Students' Perceptions of Institutional Identity: Validating the DePaul Mission and Values Inventory at a Franciscan University

Science.gov (United States)

Matteo, Elizabeth K.; Bottom, Todd L.; Ferrari, Joseph R.

2013-01-01

The "DePaul Mission and Values Inventory" ("DMV") was validated based on the mission, identity, and values of a large, urban, Catholic, Vincentian institution. We examined the suitability of the "DMV" at a small, suburban, Catholic, Franciscan university. A sample of 275 undergraduates (218 women, 57 men:…

Supplement to ACUMEN deliverable 5.4a: Description and comparison of indicators in Google Scholar and Web of Science

DEFF Research Database (Denmark)

Wildgaard, Lorna Elizabeth; Larsen, Birger; Schneider, Jesper

2014-01-01

of individual researchers. In this report we begin by comparing database coverage, coverage at seniority and gender-level and then the performance of four basic indicators computed in both databases. In the main deliverable 5.4a, we investigate in a cluster analysis the performance of our previously identified......We collected publication and citation data in two databases to investigate the extent performance of author-level indicators are effected by choice of database, the stability of indicators across databases and ultimately to illustrate how differences in the computed indicators change our perception...

SiteChar. Characterisation of European CO2 storage. Deliverable D8.2. Trust building and raising public awareness

Energy Technology Data Exchange (ETDEWEB)

Brunsting, S.; Pol, M.; Mastop, E.A. [ECN Policy Studies, Energy research Centre of the Netherlands ECN, Amsterdam (Netherlands); Kaiser, M.; Zimmer, R. [Unabhaengiges Institut fuer Umweltfragen UfU, Berlin (Germany); Shackley, S.; Mabon, L.; Howell, R. [Scottish Carbon Capture and Storage SCCS, Edinburg, Scotland (United Kingdom)

2012-08-15

At local level, public support has proven crucial to the implementation of CO2 capture and storage (CCS) demonstration projects. Whereas no method exists to guarantee public acceptability of any project, a constructive stakeholder and community engagement process does increase the likelihood thereof. This deliverable is a follow-up to deliverable D8.1 'Social site characterisation'. Social site characterisation can be used as an instrument to explore, plan and evaluate a process of active and constructive local stakeholder and citizen engagement in a prospective CCS project as a parallel activity to technical site characterisation. It serves as an analytical tool to describe the local social circumstances in the area and to design and evaluate stakeholder and community engagement efforts with the aims of building trust and raising public awareness. Using results from the social site characterisation of the area, the present deliverable focuses on the second purpose. It presents results from public engagement activities designed to raise public awareness and inform public opinion of a prospective CCS site in Poland (onshore) and the UK (offshore): focus conferences. Furthermore, by initiating an enhanced cooperation in planning of new storage sites between project developers, authorities and the local public, focus conferences aim to serve as a 'hinge' between social site characterisation as a research effort and application to real-life project settings. The focus conferences are part of a range of public engagement activities including the setup of public information websites on generic and site-specific CCS, information meetings. A second survey eventually shall evaluate the results of the public engagement activities. The aim of the focus conferences was to raise public awareness and assist public opinion forming processes of a prospective CCS site in Poland (onshore) and the UK (offshore). At the same time, it aimed to present and test a

The Value of Qualitative Methods in Social Validity Research

Science.gov (United States)

Leko, Melinda M.

2014-01-01

One quality indicator of intervention research is the extent to which the intervention has a high degree of social validity, or practicality. In this study, I drew on Wolf's framework for social validity and used qualitative methods to ascertain five middle schoolteachers' perceptions of the social validity of System 44®--a phonics-based reading…

Outlook for B.C. gas production and deliverability in relation to domestic and export markets

International Nuclear Information System (INIS)

Phelps, M.E.J.

1993-01-01

The business outlook for natural gas in British Columbia is discussed. Drilling activity in B.C. is increasing, and it is predicted that reserve additions over 1993-1998 will total 3.4 terra cubic feet. Deliverability in 1993 is 1.9 billion cubic feet/d, and this is expected to rise 30% by 1998. Westcoast is doubling raw gas capacity at the Pine River plant and is constructing new raw gas transmission lines. Growth is expected to continue at 6%/y for the next five years. In the deregulated environment, short term fluctuations in price are to be expected, however consumers are reluctant to tolerate price increases when levels of disposable income are static or decreasing. Regular, predictable and sustained increases in prices are preferable to sudden, significant oscillations, especially for residental customers

Assessment of the Value, Impact, and Validity of the Jobs and Economic Development Impacts (JEDI) Suite of Models

Energy Technology Data Exchange (ETDEWEB)

Billman, L.; Keyser, D.

2013-08-01

The Jobs and Economic Development Impacts (JEDI) models, developed by the National Renewable Energy Laboratory (NREL) for the U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EERE), use input-output methodology to estimate gross (not net) jobs and economic impacts of building and operating selected types of renewable electricity generation and fuel plants. This analysis provides the DOE with an assessment of the value, impact, and validity of the JEDI suite of models. While the models produce estimates of jobs, earnings, and economic output, this analysis focuses only on jobs estimates. This validation report includes an introduction to JEDI models, an analysis of the value and impact of the JEDI models, and an analysis of the validity of job estimates generated by JEDI model through comparison to other modeled estimates and comparison to empirical, observed jobs data as reported or estimated for a commercial project, a state, or a region.

SU-F-BRB-07: A Plan Comparison Tool to Ensure Robustness and Deliverability in Online-Adaptive Radiotherapy

International Nuclear Information System (INIS)

Hill, P; Labby, Z; Bayliss, R A; Geurts, M; Bayouth, J

2015-01-01

Purpose: To develop a plan comparison tool that will ensure robustness and deliverability through analysis of baseline and online-adaptive radiotherapy plans using similarity metrics. Methods: The ViewRay MRIdian treatment planning system allows export of a plan file that contains plan and delivery information. A software tool was developed to read and compare two plans, providing information and metrics to assess their similarity. In addition to performing direct comparisons (e.g. demographics, ROI volumes, number of segments, total beam-on time), the tool computes and presents histograms of derived metrics (e.g. step-and-shoot segment field sizes, segment average leaf gaps). Such metrics were investigated for their ability to predict that an online-adapted plan reasonably similar to a baseline plan where deliverability has already been established. Results: In the realm of online-adaptive planning, comparing ROI volumes offers a sanity check to verify observations found during contouring. Beyond ROI analysis, it has been found that simply editing contours and re-optimizing to adapt treatment can produce a delivery that is substantially different than the baseline plan (e.g. number of segments increased by 31%), with no changes in optimization parameters and only minor changes in anatomy. Currently the tool can quickly identify large omissions or deviations from baseline expectations. As our online-adaptive patient population increases, we will continue to develop and refine quantitative acceptance criteria for adapted plans and relate them historical delivery QA measurements. Conclusion: The plan comparison tool is in clinical use and reports a wide range of comparison metrics, illustrating key differences between two plans. This independent check is accomplished in seconds and can be performed in parallel to other tasks in the online-adaptive workflow. Current use prevents large planning or delivery errors from occurring, and ongoing refinements will lead to

A Practical Measure of Student Motivation: Establishing Validity Evidence for the Expectancy-Value-Cost Scale in Middle School

Science.gov (United States)

Kosovich, Jeff J.; Hulleman, Chris S.; Barron, Kenneth E.; Getty, Steve

2015-01-01

We present validity evidence for the Expectancy-Value-Cost (EVC) Scale of student motivation. Using a brief, 10-item scale, we measured middle school students' expectancy, value, and cost for their math and science classes in the Fall and Winter of the same academic year. Confirmatory factor analyses supported the three-factor structure of the EVC…

Measuring the Value of New Drugs: Validity and Reliability of 4 Value Assessment Frameworks in the Oncology Setting.

Science.gov (United States)

Bentley, Tanya G K; Cohen, Joshua T; Elkin, Elena B; Huynh, Julie; Mukherjea, Arnab; Neville, Thanh H; Mei, Matthew; Copher, Ronda; Knoth, Russell; Popescu, Ioana; Lee, Jackie; Zambrano, Jenelle M; Broder, Michael S

2017-06-01

Several organizations have developed frameworks to systematically assess the value of new drugs. To evaluate the convergent validity and interrater reliability of 4 value frameworks to understand the extent to which these tools can facilitate value-based treatment decisions in oncology. Eight panelists used the American Society of Clinical Oncology (ASCO), European Society for Medical Oncology (ESMO), Institute for Clinical and Economic Review (ICER), and National Comprehensive Cancer Network (NCCN) frameworks to conduct value assessments of 15 drugs for advanced lung and breast cancers and castration-refractory prostate cancer. Panelists received instructions and published clinical data required to complete the assessments, assigning each drug a numeric or letter score. Kendall's Coefficient of Concordance for Ranks (Kendall's W) was used to measure convergent validity by cancer type among the 4 frameworks. Intraclass correlation coefficients (ICCs) were used to measure interrater reliability for each framework across cancers. Panelists were surveyed on their experiences. Kendall's W across all 4 frameworks for breast, lung, and prostate cancer drugs was 0.560 (P= 0.010), 0.562 (P = 0.010), and 0.920 (P fair to excellent, increasing with clinical benefit subdomain concordance and simplicity of drug trial data. Interrater reliability, highest for ASCO and ESMO, improved with clarity of instructions and specificity of score definitions. Continued use, analyses, and refinements of these frameworks will bring us closer to the ultimate goal of using value-based treatment decisions to improve patient care and outcomes. This work was funded by Eisai Inc. Copher and Knoth are employees of Eisai Inc. Bentley, Lee, Zambrano, and Broder are employees of Partnership for Health Analytic Research, a health services research company paid by Eisai Inc. to conduct this research. For this study, Cohen, Huynh, and Neville report fees from Partnership for Health Analytic Research

Police Enforcement Policy and Programmes on European Roads (PEPPER). Deliverable 4a: Good practice in data, data collection and data use for monitoring and evaluating Traffic Law Enforcement.

NARCIS (Netherlands)

Schagen, I.N.L.G. Bernhoft, I.M. Erke, A. Ewert, U. Kallberg, V.-P. & Skladana, P.

2008-01-01

This report is the Deliverable of task 4.3a of the PEPPER project. It describes the good practice requirements regarding data, data collection and data use for monitoring and evaluating Traffic Law Enforcement (TLE). The aim is that, eventually, individual police forces/countries put the identified

Evaluation of dose prediction errors and optimization convergence errors of deliverable-based head-and-neck IMRT plans computed with a superposition/convolution dose algorithm

International Nuclear Information System (INIS)

Mihaylov, I. B.; Siebers, J. V.

2008-01-01

The purpose of this study is to evaluate dose prediction errors (DPEs) and optimization convergence errors (OCEs) resulting from use of a superposition/convolution dose calculation algorithm in deliverable intensity-modulated radiation therapy (IMRT) optimization for head-and-neck (HN) patients. Thirteen HN IMRT patient plans were retrospectively reoptimized. The IMRT optimization was performed in three sequential steps: (1) fast optimization in which an initial nondeliverable IMRT solution was achieved and then converted to multileaf collimator (MLC) leaf sequences; (2) mixed deliverable optimization that used a Monte Carlo (MC) algorithm to account for the incident photon fluence modulation by the MLC, whereas a superposition/convolution (SC) dose calculation algorithm was utilized for the patient dose calculations; and (3) MC deliverable-based optimization in which both fluence and patient dose calculations were performed with a MC algorithm. DPEs of the mixed method were quantified by evaluating the differences between the mixed optimization SC dose result and a MC dose recalculation of the mixed optimization solution. OCEs of the mixed method were quantified by evaluating the differences between the MC recalculation of the mixed optimization solution and the final MC optimization solution. The results were analyzed through dose volume indices derived from the cumulative dose-volume histograms for selected anatomic structures. Statistical equivalence tests were used to determine the significance of the DPEs and the OCEs. Furthermore, a correlation analysis between DPEs and OCEs was performed. The evaluated DPEs were within ±2.8% while the OCEs were within 5.5%, indicating that OCEs can be clinically significant even when DPEs are clinically insignificant. The full MC-dose-based optimization reduced normal tissue dose by as much as 8.5% compared with the mixed-method optimization results. The DPEs and the OCEs in the targets had correlation coefficients greater

Validation of mean glandular dose values provided by a digital breast tomosynthesis system in Brazil

International Nuclear Information System (INIS)

Beraldo O, B.; Paixao, L.; Donato da S, S.; Araujo T, M. H.; Nogueira, M. S.

2014-08-01

Digital breast tomosynthesis (DBT) is an emerging imaging modality that provides quasi-three-dimensional structural information of the breast and has strong promise to improve the differentiation of normal tissue and suspicious masses reducing the tissue overlaps. DBT images are reconstructed from a sequence of low-dose X-ray projections of the breast acquired at a small number of angles over a limited angular range. The Ho logic Selen ia Dimensions system is equipped with an amorphous Selenium (a-Se) detector layer of 250 μm thickness and a 70 μm pixel pitch. Studies are needed to determine the radiation dose of patients that are undergoing this emerging procedure to compare with the results obtained in DBT images. The mean glandular dose (D G ) is the dosimetric quantity used in quality control of the mammographic systems. The aim of this work is to validate D G values for different breast thicknesses provided by a Ho logic Selen ia Dimensions system using a DBT mode in comparison with the same results obtained by a calibrated 90 X 5-6M-model Radcal ionization chamber. D G values were derived from the incident air kerma (K i ) measurements and tabulated conversion coefficients that are dependent on the half value layer (HVL) of the X-ray spectrum. Voltage and tube loading values were recorded in irradiations using W/Al anode/filter combination, automatic exposure control mode and polymethyl methacrylate (PMMA) slabs which simulate different breast thicknesses. For K i measurements, the ionization chamber was positioned at 655 mm from the focus and the same radiographic technique values were selected with the manual mode. D G values for a complete procedure ranged from 0.9 ± 0.1 to 3.7 ± 0.4 mGy. The results for different breast thicknesses are in accordance with values obtained by DBT images and with acceptable levels established by the Commission of the European Communities (Cec) and the International Atomic Energy Agency (IAEA). This work contributes to

Validation of mean glandular dose values provided by a digital breast tomosynthesis system in Brazil

Energy Technology Data Exchange (ETDEWEB)

Beraldo O, B.; Paixao, L.; Donato da S, S. [Centro de Desenvolvimento da Tecnologia Nuclear / CNEN, Post-graduation in Sciences and Technology of Radiations Minerals and Materials, Pte. Antonio Carlos 6627, 31270-901 Belo Horizonte (Brazil); Araujo T, M. H. [Dr Maria Helena Araujo Teixeira Clinic, Guajajaras 40, 30180-100 Belo Horizonte (Brazil); Nogueira, M. S., E-mail: bbo@cdtn.br [Centro de Desenvolvimento da Tecnologia Nuclear / CNEN, Pte. Antonio Carlos 6627, 31270-901 Belo Horizonte (Brazil)

2014-08-15

Digital breast tomosynthesis (DBT) is an emerging imaging modality that provides quasi-three-dimensional structural information of the breast and has strong promise to improve the differentiation of normal tissue and suspicious masses reducing the tissue overlaps. DBT images are reconstructed from a sequence of low-dose X-ray projections of the breast acquired at a small number of angles over a limited angular range. The Ho logic Selen ia Dimensions system is equipped with an amorphous Selenium (a-Se) detector layer of 250 μm thickness and a 70 μm pixel pitch. Studies are needed to determine the radiation dose of patients that are undergoing this emerging procedure to compare with the results obtained in DBT images. The mean glandular dose (D{sub G}) is the dosimetric quantity used in quality control of the mammographic systems. The aim of this work is to validate D{sub G} values for different breast thicknesses provided by a Ho logic Selen ia Dimensions system using a DBT mode in comparison with the same results obtained by a calibrated 90 X 5-6M-model Radcal ionization chamber. D{sub G} values were derived from the incident air kerma (K{sub i}) measurements and tabulated conversion coefficients that are dependent on the half value layer (HVL) of the X-ray spectrum. Voltage and tube loading values were recorded in irradiations using W/Al anode/filter combination, automatic exposure control mode and polymethyl methacrylate (PMMA) slabs which simulate different breast thicknesses. For K{sub i} measurements, the ionization chamber was positioned at 655 mm from the focus and the same radiographic technique values were selected with the manual mode. D{sub G} values for a complete procedure ranged from 0.9 ± 0.1 to 3.7 ± 0.4 mGy. The results for different breast thicknesses are in accordance with values obtained by DBT images and with acceptable levels established by the Commission of the European Communities (Cec) and the International Atomic Energy Agency (IAEA

Virtual Enterprise Reference Architecture and Methodology (VERAM), Joint D41/D43 deliverable of GLOBEMEN

DEFF Research Database (Denmark)

Tølle, Martin; Zwegers, Arian; Vesterager, Johan

2003-01-01

. IMS Globemen is an inter-regional project aiming to develop methods, tools and architectures to support inter-enterprise operations in one-of-kind industries, in different lifecycle phases. This deliverable describes an architectural framework VERAM including a description/elaboration of its elements......-of-a-kind-production”, the concept of the Virtual Enterprise (VE) and the Virtual Enterprise Reference Architecture (VERA) developed in GLOBEMEN. - In Chapter 4 a so-called life history example is presented to give a possible scenario about how an enterprise network could evolve over time, and to point out the need for preparing...... and setting up networks and VEs. The life history example in Chapter 4 highlights the potential for preparing and reusing existing knowledge related to enterprise networks and VEs. - As a means to structure relevant knowledge GLOBEMEN developed the VERAM (Virtual Enterprise Reference Architecture...

The Study of Validity and Reliability of the Perceived Value Scale of Prospective Teachers in Terms of Teaching Profession

Science.gov (United States)

Demir, Engin; Budak, Yusuf; Demir, Cennet Gologlu

2017-01-01

The aim of this study was to develop "Perceived Value Scale in regard to Teaching Profession of Prospective Teachers." The validity and reliability analysis of the scale, developed for prospective elementary school teachers, was performed. In order to determine the values of the teaching profession, first of all, the related literature…

Validity of High School Physic Module With Character Values Using Process Skill Approach In STKIP PGRI West Sumatera

Science.gov (United States)

Anaperta, M.; Helendra, H.; Zulva, R.

2018-04-01

This study aims to describe the validity of physics module with Character Oriented Values Using Process Approach Skills at Dynamic Electrical Material in high school physics / MA and SMK. The type of research is development research. The module development model uses the development model proposed by Plomp which consists of (1) preliminary research phase, (2) the prototyping phase, and (3) assessment phase. In this research is done is initial investigation phase and designing. Data collecting technique to know validation is observation and questionnaire. In the initial investigative phase, curriculum analysis, student analysis, and concept analysis were conducted. In the design phase and the realization of module design for SMA / MA and SMK subjects in dynamic electrical materials. After that, the formative evaluation which include self evaluation, prototyping (expert reviews, one-to-one, and small group. At this stage validity is performed. This research data is obtained through the module validation sheet, which then generates a valid module.

Validation of an online replanning technique for prostate adaptive radiotherapy

Energy Technology Data Exchange (ETDEWEB)

Peng Cheng; Chen Guangpei; Ahunbay, Ergun; Wang Dian; Lawton, Colleen; Li, X Allen, E-mail: ali@mcw.edu [Department of Radiation Oncology, Medical College of Wisconsin, Milwaukee, WI (United States)

2011-06-21

We have previously developed an online adaptive replanning technique to rapidly adapt the original plan according to daily CT. This paper reports the quality assurance (QA) developments in its clinical implementation for prostate cancer patients. A series of pre-clinical validation tests were carried out to verify the overall accuracy and consistency of the online replanning procedure. These tests include (a) phantom measurements of 22 individual patient adaptive plans to verify their accuracy and deliverability and (b) efficiency and applicability of the online replanning process. A four-step QA procedure was established to ensure the safe and accurate delivery of an adaptive plan, including (1) offline phantom measurement of the original plan, (2) online independent monitor unit (MU) calculation for a redundancy check, (3) online verification of plan-data transfer using an in-house software and (4) offline validation of actually delivered beam parameters. The pre-clinical validations demonstrate that the newly implemented online replanning technique is dosimetrically accurate and practically efficient. The four-step QA procedure is capable of identifying possible errors in the process of online adaptive radiotherapy and to ensure the safe and accurate delivery of the adaptive plans. Based on the success of this work, the online replanning technique has been used in the clinic to correct for interfractional changes during the prostate radiation therapy.

Validation of an online replanning technique for prostate adaptive radiotherapy

International Nuclear Information System (INIS)

Peng Cheng; Chen Guangpei; Ahunbay, Ergun; Wang Dian; Lawton, Colleen; Li, X Allen

2011-01-01

We have previously developed an online adaptive replanning technique to rapidly adapt the original plan according to daily CT. This paper reports the quality assurance (QA) developments in its clinical implementation for prostate cancer patients. A series of pre-clinical validation tests were carried out to verify the overall accuracy and consistency of the online replanning procedure. These tests include (a) phantom measurements of 22 individual patient adaptive plans to verify their accuracy and deliverability and (b) efficiency and applicability of the online replanning process. A four-step QA procedure was established to ensure the safe and accurate delivery of an adaptive plan, including (1) offline phantom measurement of the original plan, (2) online independent monitor unit (MU) calculation for a redundancy check, (3) online verification of plan-data transfer using an in-house software and (4) offline validation of actually delivered beam parameters. The pre-clinical validations demonstrate that the newly implemented online replanning technique is dosimetrically accurate and practically efficient. The four-step QA procedure is capable of identifying possible errors in the process of online adaptive radiotherapy and to ensure the safe and accurate delivery of the adaptive plans. Based on the success of this work, the online replanning technique has been used in the clinic to correct for interfractional changes during the prostate radiation therapy.

Cross-National Validation of Prognostic Models Predicting Sickness Absence and the Added Value of Work Environment Variables

NARCIS (Netherlands)

Roelen, Corne A. M.; Stapelfeldt, Christina M.; Heymans, Martijn W.; van Rhenen, Willem; Labriola, Merete; Nielsen, Claus V.; Bultmann, Ute; Jensen, Chris

Purpose To validate Dutch prognostic models including age, self-rated health and prior sickness absence (SA) for ability to predict high SA in Danish eldercare. The added value of work environment variables to the models' risk discrimination was also investigated. Methods 2,562 municipal eldercare

Cross-National Validation of Prognostic Models Predicting Sickness Absence and the Added Value of Work Environment Variables

NARCIS (Netherlands)

Roelen, C.A.M.; Stapelfeldt, C.M.; Heijmans, M.W.; van Rhenen, W.; Labriola, M.; Nielsen, C.V.; Bultmann, U.; Jensen, C.

2015-01-01

Purpose To validate Dutch prognostic models including age, self-rated health and prior sickness absence (SA) for ability to predict high SA in Danish eldercare. The added value of work environment variables to the models’ risk discrimination was also investigated. Methods 2,562 municipal eldercare

TU-C-17A-06: Evaluating IMRT Plan Deliverability Via PTV Shape and MLC Motion

International Nuclear Information System (INIS)

McGurk, R; Smith, VA; Price, M

2014-01-01

Purpose: For step-and-shoot intensity-modulated radiation therapy (IMRT) plans, the dosimetry and deliverability can be affected by the number and shape of the segments used. Thus, plan deliverability is likely related to target volume and shape. We investigated whether the sphericity of target volumes and the previously proposed Modulation Complexity Score (MCS) could be used together to improve the detection of IMRT fields that failed quality assurance (QA). Methods: 526 and 353 IMRT fields from 32 prostate and 28 head-and-neck (H'N) patients, respectively, were analyzed. MCS was used to quantify the complexity of multi-leaf collimator shapes and motion patterns for each field. Sphericity was calculated using the surface area and volume of each patient’s planning target volume (PTV). Logistic regression models with MCS-alone or MCS and sphericity terms were fit to PlanUNC IMRT pass/fail results (5% dose difference, 4mm distance-to-agreement criteria) using SAS 9.3 (Cary, NC). Model concordance, discordance and area under the curve (AUC) were used to quantify model accuracy. Results: Mean (±1 standard deviation) MCS for prostate and H'N were 0.58(±0.15) and 0.40 (±0.14), respectively. Mean sphericity scores were 0.75(±0.05) for prostate and 0.63 (±0.12) for H'N. Both metrics were significantly different between treatment locations (p<0.01, Wilcoxon Rank Sum Test) indicating greater complexity in shape and variations for H'N PTVs. For prostate, concordance, discordance and AUC using MCS alone were 80.8%, 18.7% and 0.811. Including sphericity in the model improved these to 81.7%, 17.7% and 0.820. For H'N, the original concordance, discordance and AUC were of 72.9%, 26.9% and 0.729. Including sphericity into the model improved these metrics to 76.5%, 23.2% and 0.729. Conclusion: Sphericity provides a quantitative measure of PTV shape. While improvement in IMRT QA failure detection was modest for both prostate and H'N plans

Data needs and computational requirements for asset management decision making. Internal deliverable ID5.2.1

DEFF Research Database (Denmark)

Catrinu-Renstrom, Maria; Clement, Rémy; Tournebise, Pascal

addressing to the requirements of RMAC criterion developed in work package 2. The report has been written by several partners, three of them being European TSOs, and the three other being academic partners. Special attention has been paid to address every topic in asset management decision making process......The objective of this deliverable is to present the requirements for adapting available tools/models and identifying data needs for reliability analysis and optimal decision-making for asset management decision making process. It will serve as a basis for the next tasks of GARPUR work package 5...... decision making process, as described in work package 2. Some advanced models exist in scientific literature to characterize the spatio-temporal variation and correlations of relevant factors. Some of these models have been proposed in academia, and offer improved representation with respect to those...

Positive predictive value of infective endocarditis in the Danish National Patient Registry: a validation study.

Science.gov (United States)

Østergaard, Lauge; Adelborg, Kasper; Sundbøll, Jens; Pedersen, Lars; Loldrup Fosbøl, Emil; Schmidt, Morten

2018-05-30

The positive predictive value of an infective endocarditis diagnosis is approximately 80% in the Danish National Patient Registry. However, since infective endocarditis is a heterogeneous disease implying long-term intravenous treatment, we hypothesiszed that the positive predictive value varies by length of hospital stay. A total of 100 patients with first-time infective endocarditis in the Danish National Patient Registry were identified from January 2010 - December 2012 at the University hospital of Aarhus and regional hospitals of Herning and Randers. Medical records were reviewed. We calculated the positive predictive value according to admission length, and separately for patients with a cardiac implantable electronic device and a prosthetic heart valve using the Wilson score method. Among the 92 medical records available for review, the majority of the patients had admission length ⩾2 weeks. The positive predictive value increased with length of admission. In patients with admission length value was 65% while it was 90% for admission length ⩾2 weeks. The positive predictive value was 81% for patients with a cardiac implantable electronic device and 87% for patients with a prosthetic valve. The positive predictive value of the infective endocarditis diagnosis in the Danish National Patient Registry is high for patients with admission length ⩾2 weeks. Using this algorithm, the Danish National Patient Registry provides a valid source for identifying infective endocarditis for research.

Integration and validation of a data grid software

Science.gov (United States)

Carenton-Madiec, Nicolas; Berger, Katharina; Cofino, Antonio

2014-05-01

The Earth System Grid Federation (ESGF) Peer-to-Peer (P2P) is a software infrastructure for the management, dissemination, and analysis of model output and observational data. The ESGF grid is composed with several types of nodes which have different roles. About 40 data nodes host model outputs and datasets using thredds catalogs. About 25 compute nodes offer remote visualization and analysis tools. About 15 index nodes crawl data nodes catalogs and implement faceted and federated search in a web interface. About 15 Identity providers nodes manage accounts, authentication and authorization. Here we will present an actual size test federation spread across different institutes in different countries and a python test suite that were started in December 2013. The first objective of the test suite is to provide a simple tool that helps to test and validate a single data node and its closest index, compute and identity provider peer. The next objective will be to run this test suite on every data node of the federation and therefore test and validate every single node of the whole federation. The suite already implements nosetests, requests, myproxy-logon, subprocess, selenium and fabric python libraries in order to test both web front ends, back ends and security services. The goal of this project is to improve the quality of deliverable in a small developers team context. Developers are widely spread around the world working collaboratively and without hierarchy. This kind of working organization context en-lighted the need of a federated integration test and validation process.

Silver deposited carboxymethyl chitosan-grafted magnetic nanoparticles as dual action deliverable antimicrobial materials.

Science.gov (United States)

Vo, Duc-Thang; Sabrina, Sabrina; Lee, Cheng-Kang

2017-04-01

Carboxymethyl chitosan (CMCS) was known to have a much better antimicrobial activity than chitosan due to the increased cationic -NH 3 + groups resulted from the intra- and intermolecular interactions between the carboxyl and amino groups. CMCS was grafted onto the surface of silica coated magnetic nanoparticles (MNPs) to obtain magnetically retrievable and deliverable antimicrobial nanoparticles (MNPs@CMCS). The presence of carboxylate groups in CMCS not only enhanced antimicrobial activity but also enabled Ag ions chelating ability to induce the in situ formation of Ag nanoparticles (AgNPs). The deposition of AgNPs on the surface of MNPs@CMCS could significantly increase its antimicrobial activity against planktonic cells due to the dual action of CMCS and AgNPs. Due to its high magnetism, the as-prepared MNPs@CMCS-Ag could be efficiently delivered into an existing biofilm under the guidance of an applied magnetic field. Without direct contact, the Ag ions and/or radical oxygen species (ROS) released from the deposited Ag nanoparticles could effectively kill the bacteria embedded in the extracellular polymeric substances (EPS) matrix of biofilm. Copyright © 2016 Elsevier B.V. All rights reserved.

Designing equitable workplace dietary interventions: perceptions of intervention deliverers.

Science.gov (United States)

Smith, Sarah A; Visram, Shelina; O'Malley, Claire; Summerbell, Carolyn; Araujo-Soares, Vera; Hillier-Brown, Frances; Lake, Amelia A

2017-10-16

Workplaces are a good setting for interventions that aim to support workers in achieving a healthier diet and body weight. However, little is known about the factors that impact on the feasibility and implementation of these interventions, and how these might vary by type of workplace and type of worker. The aim of this study was to explore the views of those involved in commissioning and delivering the Better Health at Work Award, an established and evidence-based workplace health improvement programme. One-to-one semi-structured interviews were conducted with 11 individuals in North East England who had some level of responsibility for delivering workplace dietary interventions. Interviews were transcribed verbatim and analysed using thematic framework analysis. A number of factors were felt to promote the feasibility and implementation of interventions. These included interventions that were cost-neutral (to employee and employer), unstructured, involved colleagues for support, took place at lunchtimes, and were well-advertised and communicated via a variety of media. Offering incentives, not necessarily monetary, was perceived to increase recruitment rates. Factors that militate against feasibility and implementation of interventions included worksites that were large in size and remote, working patterns including shifts and working outside of normal working hours that were not conducive to workers being able to access intervention sessions, workplaces without appropriate provision for healthy food on site, and a lack of support from management. Intervention deliverers perceived that workplace dietary interventions should be equally and easily accessible (in terms of cost and timing of sessions) for all staff, regardless of their job role. Additional effort should be taken to ensure those staff working outside normal working hours, and those working off-site, can easily engage with any intervention, to avoid the risk of intervention-generated inequalities (IGIs).

Numerical modeling and experimental testing of a wave energy converter: deliverable D4.2

Energy Technology Data Exchange (ETDEWEB)

Zurkinden, A.S.; Kramer, M.; Ferri, F.; Kofoed, J.P.

2013-05-15

The objective of this document is to summarize the outcome of the research which has been carried out during the period May 2011 until June 2012 i.e. during the first year of the PhD study. The work has been done in collaboration with the co-authors. The aim of the project was primarily to provide numerical values for comparison with the experimental test results which were carried out in the same time. It is for this reason why Chapter 4 does consist exclusively of numerical values. Experimental values and measured time series of wave elevations have been used throughout the report in order to a) validate the numerical model and b) preform stochastic analysis. The latter technique is introduced in order to optimize the control parameters of the power take off system. (Author)

Development and validation of optimal cut-off value in inter-arm systolic blood pressure difference for prediction of cardiovascular events.

Science.gov (United States)

Hirono, Akira; Kusunose, Kenya; Kageyama, Norihito; Sumitomo, Masayuki; Abe, Masahiro; Fujinaga, Hiroyuki; Sata, Masataka

2018-01-01

An inter-arm systolic blood pressure difference (IAD) is associated with cardiovascular disease. The aim of this study was to develop and validate the optimal cut-off value of IAD as a predictor of major adverse cardiac events in patients with arteriosclerosis risk factors. From 2009 to 2014, 1076 patients who had at least one cardiovascular risk factor were included in the analysis. We defined 700 randomly selected patients as a development cohort to confirm that IAD was the predictor of cardiovascular events and to determine optimal cut-off value of IAD. Next, we validated outcomes in the remaining 376 patients as a validation cohort. The blood pressure (BP) of both arms measurements were done simultaneously using the ankle-brachial blood pressure index (ABI) form of automatic device. The primary endpoint was the cardiovascular event and secondary endpoint was the all-cause mortality. During a median period of 2.8 years, 143 patients reached the primary endpoint in the development cohort. In the multivariate Cox proportional hazards analysis, IAD was the strong predictor of cardiovascular events (hazard ratio: 1.03, 95% confidence interval: 1.01-1.05, p=0.005). The receiver operating characteristic curve revealed that 5mmHg was the optimal cut-off point of IAD to predict cardiovascular events (p<0.001). In the validation cohort, the presence of a large IAD (IAD ≥5mmHg) was significantly associated with the primary endpoint (p=0.021). IAD is significantly associated with future cardiovascular events in patients with arteriosclerosis risk factors. The optimal cut-off value of IAD is 5mmHg. Copyright © 2017 Japanese College of Cardiology. Published by Elsevier Ltd. All rights reserved.

Coordinating bracket torque and incisor inclination : Part 3: Validity of bracket torque values in achieving norm inclinations.

Science.gov (United States)

Zimmer, Bernd; Sino, Hiba

2018-03-19

To analyze common values of bracket torque (Andrews, Roth, MBT, Ricketts) for their validity in achieving incisor inclinations that are considered normal by different cephalometric standards. Using the equations developed in part 1 (eU1 (BOP) = 90° - BT (U1) - TCA (U1) + α 1 - α 2 and eL1 (BOP) = 90° - BT (L1) - TCA (L1) + β 1 - β 2 ) (abbreviations see part 1) and the mean values (± SD) obtained as statistical measures in parts 1 and 2 of the study (α 1 and β 1 [1.7° ± 0.7°], α 2 [3.6° ± 0.3°], β 2 [3.2° ± 0.4°], TCA (U1) [24.6° ± 3.6°] and TCA (L1) [22.9° ± 4.3°]) expected (= theoretically anticipated) values were calculated for upper and lower incisors (U1 and L1) and compared to targeted (= cephalometric norm) values. For U1, there was no overlapping between the ranges of expected and targeted values, as the lowest targeted value of (58.3°; Ricketts) was higher than the highest expected value (56.5°; Andrews) relative to the bisected occlusal plane (BOP). Thus all of these torque systems will aim for flatter inclinations than prescribed by any of the norm values. Depending on target values, the various bracket systems fell short by 1.8-5.5° (Andrews), 6.8-10.5° (Roth), 11.8-15.5° (MBT), or 16.8-20.5° (Ricketts). For L1, there was good agreement of the MBT system with the Ricketts and Björk target values (Δ0.1° and Δ-0.8°, respectively), and both the Roth and Ricketts systems came close to the Bergen target value (both Δ2.3°). Depending on target values, the ranges of deviation for L1 were 6.3-13.2° for Andrews (Class II prescription), 2.3°-9.2° for Roth, -3.7 to -3.2° for MBT, and 2.3-9.2° for Ricketts. Common values of upper incisor bracket torque do not have acceptable validity in achieving normal incisor inclinations. A careful selection of lower bracket torque may provide satisfactory matching with some of the targeted norm values.

Verification and validation of control system software

International Nuclear Information System (INIS)

Munro, J.K. Jr.; Kisner, R.A.; Bhadtt, S.C.

1991-01-01

The following guidelines are proposed for verification and validation (V ampersand V) of nuclear power plant control system software: (a) use risk management to decide what and how much V ampersand V is needed; (b) classify each software application using a scheme that reflects what type and how much V ampersand V is needed; (c) maintain a set of reference documents with current information about each application; (d) use Program Inspection as the initial basic verification method; and (e) establish a deficiencies log for each software application. The following additional practices are strongly recommended: (a) use a computer-based configuration management system to track all aspects of development and maintenance; (b) establish reference baselines of the software, associated reference documents, and development tools at regular intervals during development; (c) use object-oriented design and programming to promote greater software reliability and reuse; (d) provide a copy of the software development environment as part of the package of deliverables; and (e) initiate an effort to use formal methods for preparation of Technical Specifications. The paper provides background information and reasons for the guidelines and recommendations. 3 figs., 3 tabs

The Validity of Value-Added Estimates from Low-Stakes Testing Contexts: The Impact of Change in Test-Taking Motivation and Test Consequences

Science.gov (United States)

Finney, Sara J.; Sundre, Donna L.; Swain, Matthew S.; Williams, Laura M.

2016-01-01

Accountability mandates often prompt assessment of student learning gains (e.g., value-added estimates) via achievement tests. The validity of these estimates have been questioned when performance on tests is low stakes for students. To assess the effects of motivation on value-added estimates, we assigned students to one of three test consequence…

Encounters in an online brand community: development and validation of a metric for value co-creation by customers.

Science.gov (United States)

Hsieh, Pei-Ling

2015-05-01

Recent developments in service marketing have demonstrated the potential value co-creation by customers who participate in online brand communities (OBCs). Therefore, this study forecasts the co-created value by understanding the participation/behavior of customers in a multi-stakeholder OBC. This six-phase qualitative and quantitative investigation conceptualizes, constructs, refines, and tests a 12-item three-dimensional scale for measuring key factors that are related to the experience, interpersonal interactions, and social relationships that affect the value co-creation by customers in an OBC. The scale captures stable psychometric properties, measured using various reliability and validity tests, and can be applied across various industries. Finally, the utility implications and limitations of the proposed scale are discussed, and potential future research directions considered.

Building Evidence of Validity: The Relation between Work Values, Interests, Personality, and Personal Values

Science.gov (United States)

Leuty, Melanie E.; Hansen, Jo-Ida C.

2013-01-01

The current study used work values components (WVC) to examine the relationship between work values, vocational interests, personality, and personal values. Most intercorrelations between work values and other constructs were in the small effect range. Overall correlations between scale scores provided evidence of convergent and discriminant…

An editorial approach: Mike Nelson’s corridors and The Deliverance and The Patience

Directory of Open Access Journals (Sweden)

Helen Hughes

2015-06-01

Full Text Available This essay contrasts the contemporary British artist Mike Nelson’s approach to constructing his large, multi-room installations with his approach to editing the numerous artist books that he has produced since 2000. This comparison reveals several compositional symmetries between the two, namely pertaining to narrative non-linearity and meta-fictionality. The logic of montage is shown to similarly underscore both the books and the installations. This essay argues that the corridors connecting the different rooms of Nelson’s installations function in a similar way to the logic of montage: they play an integral role as the support that binds the structure of the installation (its multiple rooms together as a whole. This essay argues that the corridor is the primary viewing framework of the installation for the viewer, and that this vantage point is significant because the necessarily partial vision of the installation from the space of the corridor demonstrates the logic of installation art more broadly. I conclude by mapping the key compositional elements of Nelson’s artist books onto his installations, taking the 2001 work The Deliverance and The Patience as a case study, to show that the books do not exemplify the artwork as with traditional exhibition catalogues, but rather parallel it. That is, a structural continuity is established between these two facets of his work.

Validation of the Long- and Short-Form of the Ethical Values Assessment (EVA): A Questionnaire Measuring the Three Ethics Approach to Moral Psychology

Science.gov (United States)

Padilla-Walker, Laura Maria; Jensen, Lene Arnett

2016-01-01

Moral psychology has been moving toward consideration of multiple kinds of moral concepts and values, such as the Ethics of Autonomy, Community, and Divinity. While these three ethics have commonly been measured qualitatively, the current study sought to validate the long and short forms of the Ethical Values Assessment (EVA), which is a…

TH-AB-202-03: A Novel Tool for Computing Deliverable Doses in Dynamic MLC Tracking Treatments

Energy Technology Data Exchange (ETDEWEB)

Fast, M; Kamerling, C; Menten, M; Nill, S; Oelfke, U [The Institute of Cancer Research and The Royal Marsden NHS Foundation Trust, London (United Kingdom); Crijns, S; Raaymakers, B [University Medical Center Utrecht, Utrecht (Netherlands)

2016-06-15

Purpose: In tracked dynamic multi-leaf collimator (MLC) treatments, segments are continuously adapted to the target centroid motion in beams-eye-view. On-the-fly segment adaptation, however, potentially induces dosimetric errors due to the finite MLC leaf width and non-rigid target motion. In this study, we outline a novel tool for computing the 4d dose of lung SBRT plans delivered with MLC tracking. Methods: The following automated workflow was developed: A) centroid tracking, where the initial segments are morphed to each 4dCT phase based on the beams-eye-view GTV shift (followed by a dose calculation on each phase); B) re-optimized tracking, in which all morphed initial plans from (A) are further optimised (“warm-started”) in each 4dCT phase using the initial optimisation parameters but phase-specific volume definitions. Finally, both dose sets are accumulated to the reference phase using deformable image registration. Initial plans were generated according to the RTOG-1021 guideline (54Gy, 3-Fx, equidistant 9-beam IMRT) on the peak-exhale (reference) phase of a phase-binned 4dCT. Treatment planning and delivery simulations were performed in RayStation (research v4.6) using our in-house segment-morphing algorithm, which directly links to RayStation through a native C++ interface. Results: Computing the tracking plans and 4d dose distributions via the in-house interface takes 5 and 8 minutes respectively for centroid and re-optimized tracking. For a sample lung SBRT patient with 14mm peak-to-peak motion in sup-inf direction, mainly perpendicular leaf motion (0-collimator) resulted in small dose changes for PTV-D95 (−13cGy) and GTV-D98 (+18cGy) for the centroid tracking case compared to the initial plan. Modest reductions of OAR doses (e.g. spinal cord D2: −11cGy) were achieved in the idealized tracking case. Conclusion: This study presents an automated “1-click” workflow for computing deliverable MLC tracking doses in RayStation. Adding a non-deliverable

TH-AB-202-03: A Novel Tool for Computing Deliverable Doses in Dynamic MLC Tracking Treatments

International Nuclear Information System (INIS)

Fast, M; Kamerling, C; Menten, M; Nill, S; Oelfke, U; Crijns, S; Raaymakers, B

2016-01-01

Purpose: In tracked dynamic multi-leaf collimator (MLC) treatments, segments are continuously adapted to the target centroid motion in beams-eye-view. On-the-fly segment adaptation, however, potentially induces dosimetric errors due to the finite MLC leaf width and non-rigid target motion. In this study, we outline a novel tool for computing the 4d dose of lung SBRT plans delivered with MLC tracking. Methods: The following automated workflow was developed: A) centroid tracking, where the initial segments are morphed to each 4dCT phase based on the beams-eye-view GTV shift (followed by a dose calculation on each phase); B) re-optimized tracking, in which all morphed initial plans from (A) are further optimised (“warm-started”) in each 4dCT phase using the initial optimisation parameters but phase-specific volume definitions. Finally, both dose sets are accumulated to the reference phase using deformable image registration. Initial plans were generated according to the RTOG-1021 guideline (54Gy, 3-Fx, equidistant 9-beam IMRT) on the peak-exhale (reference) phase of a phase-binned 4dCT. Treatment planning and delivery simulations were performed in RayStation (research v4.6) using our in-house segment-morphing algorithm, which directly links to RayStation through a native C++ interface. Results: Computing the tracking plans and 4d dose distributions via the in-house interface takes 5 and 8 minutes respectively for centroid and re-optimized tracking. For a sample lung SBRT patient with 14mm peak-to-peak motion in sup-inf direction, mainly perpendicular leaf motion (0-collimator) resulted in small dose changes for PTV-D95 (−13cGy) and GTV-D98 (+18cGy) for the centroid tracking case compared to the initial plan. Modest reductions of OAR doses (e.g. spinal cord D2: −11cGy) were achieved in the idealized tracking case. Conclusion: This study presents an automated “1-click” workflow for computing deliverable MLC tracking doses in RayStation. Adding a non-deliverable

The Value Relevance Of Value Added And Stakeholder Compensation Across Business Cultures

OpenAIRE

John Darcy

2011-01-01

This research performed a partial test of the instrumental validity of the stakeholder model by examining the value relevance of value added relative to income and the incremental value relevance of two stakeholder compensation components of value added, wages and interest for Japan, Germany, United States, and United Kingdom.

Stability, reliability and validity of social value orientation

NARCIS (Netherlands)

Bekkers, René

2004-01-01

Social value orientations are often regarded as stable individual differences in otherregarding preferences - the concern for equality and joint outcomes - affecting the propensity to cooperate in experimental social dilemma situations. Despite the widespread use of measures of social value

The iTREN-2030 reference scenario until 2030. Deliverable D4

Energy Technology Data Exchange (ETDEWEB)

Fiorello, Davide; De Stasio, Claudia; Koehler, Jonathan; Kraft, Markus; Netwon, Sean; Purwanto, Joko; Schade, Burkhard; Schade, Wolfgang; Szimba, Eckhard

2009-07-01

The basic objective of iTREN-2030 is to extend the forecasting and assessment capabilities of the TRANS-TOOLS transport model to the new policy issues arising from the technology, environment and energy fields. This is achieved by couplin the TRANS-TOOLS model with three other models, ASTRA, POLES and TREMOVE covering these new policy issues. The TRANS-TOOLS transport network model has been developed to constitute the reference tool for supporting transport policy in the EU and currently is being developed in several European projects. The scenario set-up to be developed in iTREN-2030 has been modified, so that the projects develops a reference scenario and an integrated scenario. For the reference scenario, the three other modelling tools are harmonised with TRANS-TOOLS and made consistent with each other. This results in a coherent scenario for Europe until 2030 for technology, transport, energy, environment and economic development. The integrated scenario will consider the changing framework conditions until 2030, inparticular the policy pressure coming from climate policy and the increasing scarcity of fossil fuels as well as the impact of the financial and economic crisis. Within the iTREN-2030 project, the overall objective of Work Package 4 (WP4) producing tis deliverable is to develop the reference scenario for the quantitative projections using the four modelling tools involved in the project. The main aims of WP4 are to (a) define a consistent framework for using the different tools in an integrated way; (b) calibrate models with exchanged input to a coherent joint reference; (c) implement external input from WP3 and running models for projections; (d) produce output procedures and templates to facilitate assessment in WP5.

A new method to model electroconvulsive therapy in rats with increased construct validity and enhanced translational value.

Science.gov (United States)

Theilmann, Wiebke; Löscher, Wolfgang; Socala, Katarzyna; Frieling, Helge; Bleich, Stefan; Brandt, Claudia

2014-06-01

Electroconvulsive therapy is the most effective therapy for major depressive disorder (MDD). The remission rate is above 50% in previously pharmacoresistant patients but the mechanisms of action are not fully understood. Electroconvulsive stimulation (ECS) in rodents mimics antidepressant electroconvulsive therapy (ECT) in humans and is widely used to investigate the underlying mechanisms of ECT. For the translational value of findings in animal models it is essential to establish models with the highest construct, face and predictive validity possible. The commonly used model for ECT in rodents does not meet the demand for high construct validity. For ECT, cortical surface electrodes are used to induce therapeutic seizures whereas ECS in rodents is exclusively performed by auricular or corneal electrodes. However, the stimulation site has a major impact on the type and spread of the induced seizure activity and its antidepressant effect. We propose a method in which ECS is performed by screw electrodes placed above the motor cortex of rats to closely simulate the clinical situation and thereby increase the construct validity of the model. Cortical ECS in rats induced reliably seizures comparable to human ECT. Cortical ECS was more effective than auricular ECS to reduce immobility in the forced swim test. Importantly, auricular stimulation had a negative influence on the general health condition of the rats with signs of fear during the stimulation sessions. These results suggest that auricular ECS in rats is not a suitable ECT model. Cortical ECS in rats promises to be a valid method to mimic ECT. Copyright © 2014 Elsevier Ltd. All rights reserved.

Adaptation and validation of the psychosocial values questionnaire to the context of Brazilian and Portuguese teenagers

Directory of Open Access Journals (Sweden)

Samuel Lins

2016-01-01

Full Text Available Abstract The aim of this work was to adapt and validate the Psychosocial Values Questionnaire (PVQ-24 for application to Portuguese and Brazilian adolescents and to test the content, structure and compatibility hypotheses of the societal approach to values. A total of 730 adolescents participated in the study, 482 Brazilian (213 boys and 269 girls with average age of 15 years (SD= 1.1 and 238 Portuguese (117 boys and 121 girls with average age of 15.4 years (SD= 1.8. In both samples, the PVQ-24 showed satisfactory internal consistency, and the proposed factor structure was confirmed (four systems: materialistic, religious, hedonistic, and post-materialist. The post-materialist system was organized into three subsystems: social well-being, individual well-being and occupational well-being. In both samples, confirmatory factor analysis and multidimensional scaling supported the hypotheses regarding content (four systems and three subsystems, structure (two dimensions and compatibility (positive correlations between systems.

Bioclim deliverable D8a: development of the rule-based down-scaling methodology for BIOCLIM Work-package 3

International Nuclear Information System (INIS)

2003-01-01

The BIOCLIM project on modelling sequential Biosphere systems under Climate change for radioactive waste disposal is part of the EURATOM fifth European framework programme. The project was launched in October 2000 for a three-year period. The project aims at providing a scientific basis and practical methodology for assessing the possible long term impacts on the safety of radioactive waste repositories in deep formations due to climate and environmental change. Five work packages (WP) have been identified to fulfill the project objectives. One of the tasks of BIOCLIM WP3 was to develop a rule-based approach for down-scaling from the MoBidiC model of intermediate complexity in order to provide consistent estimates of monthly temperature and precipitation for the specific regions of interest to BIOCLIM (Central Spain, Central England and Northeast France, together with Germany and the Czech Republic). A statistical down-scaling methodology has been developed by Philippe Marbaix of CEA/LSCE for use with the second climate model of intermediate complexity used in BIOCLIM - CLIMBER-GREMLINS. The rule-based methodology assigns climate states or classes to a point on the time continuum of a region according to a combination of simple threshold values which can be determined from the coarse scale climate model. Once climate states or classes have been defined, monthly temperature and precipitation climatologies are constructed using analogue stations identified from a data base of present-day climate observations. The most appropriate climate classification for BIOCLIM purposes is the Koeppen/Trewartha scheme. This scheme has the advantage of being empirical, but only requires monthly averages of temperature and precipitation as input variables. Section 2 of this deliverable (D8a) outline how each of the eight methodological steps have been undertaken for each of the three main BIOCLIM study regions (Central England, Northeast France and Central Spain) using Mo

Estimating patient dose from CT exams that use automatic exposure control: Development and validation of methods to accurately estimate tube current values.

Science.gov (United States)

McMillan, Kyle; Bostani, Maryam; Cagnon, Christopher H; Yu, Lifeng; Leng, Shuai; McCollough, Cynthia H; McNitt-Gray, Michael F

2017-08-01

The vast majority of body CT exams are performed with automatic exposure control (AEC), which adapts the mean tube current to the patient size and modulates the tube current either angularly, longitudinally or both. However, most radiation dose estimation tools are based on fixed tube current scans. Accurate estimates of patient dose from AEC scans require knowledge of the tube current values, which is usually unavailable. The purpose of this work was to develop and validate methods to accurately estimate the tube current values prescribed by one manufacturer's AEC system to enable accurate estimates of patient dose. Methods were developed that took into account available patient attenuation information, user selected image quality reference parameters and x-ray system limits to estimate tube current values for patient scans. Methods consistent with AAPM Report 220 were developed that used patient attenuation data that were: (a) supplied by the manufacturer in the CT localizer radiograph and (b) based on a simulated CT localizer radiograph derived from image data. For comparison, actual tube current values were extracted from the projection data of each patient. Validation of each approach was based on data collected from 40 pediatric and adult patients who received clinically indicated chest (n = 20) and abdomen/pelvis (n = 20) scans on a 64 slice multidetector row CT (Sensation 64, Siemens Healthcare, Forchheim, Germany). For each patient dataset, the following were collected with Institutional Review Board (IRB) approval: (a) projection data containing actual tube current values at each projection view, (b) CT localizer radiograph (topogram) and (c) reconstructed image data. Tube current values were estimated based on the actual topogram (actual-topo) as well as the simulated topogram based on image data (sim-topo). Each of these was compared to the actual tube current values from the patient scan. In addition, to assess the accuracy of each method in estimating

Short-term Canadian natural gas deliverability 2006-2008 : an energy market assessment

International Nuclear Information System (INIS)

2006-10-01

This report presented an assessment of the expected capability of Canadian gas production through to the year 2008. Strong natural gas prices have led to record drilling levels in Canada's natural gas industry. North American natural gas prices reached a peak near the end of 2005. The rise in prices during 2005 reflected high world crude oil prices, a tight balance between natural gas supply and demand, and disruptions to United States gas supply from 2 hurricanes. In response to rising prices, western Canada drilling activity achieved new highs in early 2006. Higher drilling rates also reflected rising costs for key inputs of steel, fuel, and labour. Gas prices have since softened due to a storage overhang resulting from a mild winter. The combination of rising costs and softening prices has impacted margins for Canadian gas producers. In response, some producers have reduced drilling expansion plans in coalbed methane (CBM) and shallow gas plays in the Western Canadian Sedimentary Basin (WCSB). Increases in deeper gas drilling have been maintained. Total gas drilling for 2006 is expected to rise by 3 per cent compared to 2005. The report projected a small increase in Canada's total annual gas production from 484 million m 3 /d in 2005 to 491 million m 3 /d in 2008. Annual average deliverability of conventional gas is expected to decline slightly over the projection period. The decrease is expected to be more than offset by growth in CBM production in western Canada, which is expected to increase from 8 million m 3 /d in 2005 to 27 million m 3 /d in 2008. 5 tabs., 5 figs

Recording Cultural Heritage Using Terrestrial Laserscanning - Dealing with the System, the Huge Datasets they Create and Ways to Extract the Necessary Deliverables you can Work with

Science.gov (United States)

Christofori, E.; Bierwagen, J.

2013-07-01

Recording Cultural Heritage objects using terrestrial laserscanning becomes more and more popular over the last years. Since terrestrial Laserscanning System (TLS) Manufacturers have strongly increased the amount and speed of data captured with a single scan at each system upgrade and cutting down system costs the use of TLS Systems for recording cultural heritage is an option for recording worth to think about beside traditional methods like Photogrammetric. TLS Systems can be a great tool for capturing complex cultural heritage object within a short amount of time beside the traditional methods but can be a nightmare to handle for further process if not used right while capturing. Furthermore TLS Systems still have to be recognized as survey equipment, even though some of the manufactures promote them as everyday tool. They have to be used in an intelligent way having in mind the clients and the individual cultural objects needs. Thus the efficient way to use TLS Systems for data recording becomes a relevant topic to deal with the huge Amount of data the Systems collect while recording. Already small projects can turn into huge Pointcloud Datasets that End user, like Architects or Archaeologist neither can't deal with as their technical equipment doesn't fit the requirements of the Dataset nor do they have the software tools to use the Data as the current software tools still are high prized. Even the necessary interpretation of the Dataset can be a tough task if the people who have to work on with the Pointcloud aren't educated right in order to understand TLS and the results it creates. The use of TLS Systems has to have in mind the project requirements of the individual Heritage Object, like the required accuracy, standards for Levels of Details (e.g. "Empfehlungen für die Baudokumentation, Günther Eckstein, Germany"), the required kind of Deliverables (Visualization, 2D Drawings, True Deformation Drawings, 3D Models, BIM or 4D - Animations) as well as the

Empirical Data and Results of the Construct Vadility Studies

NARCIS (Netherlands)

Ravaja, N.; de Kort, Y.A.W.; IJsselsteijn, W.A.; Klimmt, C.; Lindley, C.; Mathiak, K.; Turpeinen, M.

2007-01-01

In this deliverable, the WP5 partners present the results of the FUGA construct validity studies. The objective of the WP5 was to establish the construct validity of the different potential measures of game experience based on the different measurement techniques. This was the first step to ensure

Cross-national validation of prognostic models predicting sickness absence and the added value of work environment variables.

Science.gov (United States)

Roelen, Corné A M; Stapelfeldt, Christina M; Heymans, Martijn W; van Rhenen, Willem; Labriola, Merete; Nielsen, Claus V; Bültmann, Ute; Jensen, Chris

2015-06-01

To validate Dutch prognostic models including age, self-rated health and prior sickness absence (SA) for ability to predict high SA in Danish eldercare. The added value of work environment variables to the models' risk discrimination was also investigated. 2,562 municipal eldercare workers (95% women) participated in the Working in Eldercare Survey. Predictor variables were measured by questionnaire at baseline in 2005. Prognostic models were validated for predictions of high (≥30) SA days and high (≥3) SA episodes retrieved from employer records during 1-year follow-up. The accuracy of predictions was assessed by calibration graphs and the ability of the models to discriminate between high- and low-risk workers was investigated by ROC-analysis. The added value of work environment variables was measured with Integrated Discrimination Improvement (IDI). 1,930 workers had complete data for analysis. The models underestimated the risk of high SA in eldercare workers and the SA episodes model had to be re-calibrated to the Danish data. Discrimination was practically useful for the re-calibrated SA episodes model, but not the SA days model. Physical workload improved the SA days model (IDI = 0.40; 95% CI 0.19-0.60) and psychosocial work factors, particularly the quality of leadership (IDI = 0.70; 95% CI 053-0.86) improved the SA episodes model. The prognostic model predicting high SA days showed poor performance even after physical workload was added. The prognostic model predicting high SA episodes could be used to identify high-risk workers, especially when psychosocial work factors are added as predictor variables.

Handling missing values in the MDS-UPDRS.

Science.gov (United States)

Goetz, Christopher G; Luo, Sheng; Wang, Lu; Tilley, Barbara C; LaPelle, Nancy R; Stebbins, Glenn T

2015-10-01

This study was undertaken to define the number of missing values permissible to render valid total scores for each Movement Disorder Society Unified Parkinson's Disease Rating Scale (MDS-UPDRS) part. To handle missing values, imputation strategies serve as guidelines to reject an incomplete rating or create a surrogate score. We tested a rigorous, scale-specific, data-based approach to handling missing values for the MDS-UPDRS. From two large MDS-UPDRS datasets, we sequentially deleted item scores, either consistently (same items) or randomly (different items) across all subjects. Lin's Concordance Correlation Coefficient (CCC) compared scores calculated without missing values with prorated scores based on sequentially increasing missing values. The maximal number of missing values retaining a CCC greater than 0.95 determined the threshold for rendering a valid prorated score. A second confirmatory sample was selected from the MDS-UPDRS international translation program. To provide valid part scores applicable across all Hoehn and Yahr (H&Y) stages when the same items are consistently missing, one missing item from Part I, one from Part II, three from Part III, but none from Part IV can be allowed. To provide valid part scores applicable across all H&Y stages when random item entries are missing, one missing item from Part I, two from Part II, seven from Part III, but none from Part IV can be allowed. All cutoff values were confirmed in the validation sample. These analyses are useful for constructing valid surrogate part scores for MDS-UPDRS when missing items fall within the identified threshold and give scientific justification for rejecting partially completed ratings that fall below the threshold. © 2015 International Parkinson and Movement Disorder Society.

Liver stiffness value-based risk estimation of late recurrence after curative resection of hepatocellular carcinoma: development and validation of a predictive model.

Directory of Open Access Journals (Sweden)

Kyu Sik Jung

Full Text Available Preoperative liver stiffness (LS measurement using transient elastography (TE is useful for predicting late recurrence after curative resection of hepatocellular carcinoma (HCC. We developed and validated a novel LS value-based predictive model for late recurrence of HCC.Patients who were due to undergo curative resection of HCC between August 2006 and January 2010 were prospectively enrolled and TE was performed prior to operations by study protocol. The predictive model of late recurrence was constructed based on a multiple logistic regression model. Discrimination and calibration were used to validate the model.Among a total of 139 patients who were finally analyzed, late recurrence occurred in 44 patients, with a median follow-up of 24.5 months (range, 12.4-68.1. We developed a predictive model for late recurrence of HCC using LS value, activity grade II-III, presence of multiple tumors, and indocyanine green retention rate at 15 min (ICG R15, which showed fairly good discrimination capability with an area under the receiver operating characteristic curve (AUROC of 0.724 (95% confidence intervals [CIs], 0.632-0.816. In the validation, using a bootstrap method to assess discrimination, the AUROC remained largely unchanged between iterations, with an average AUROC of 0.722 (95% CIs, 0.718-0.724. When we plotted a calibration chart for predicted and observed risk of late recurrence, the predicted risk of late recurrence correlated well with observed risk, with a correlation coefficient of 0.873 (P<0.001.A simple LS value-based predictive model could estimate the risk of late recurrence in patients who underwent curative resection of HCC.

Transcriptome Profiling of Neovascularized Corneas Reveals miR-204 as a Multi-target Biotherapy Deliverable by rAAVs

Directory of Open Access Journals (Sweden)

Yi Lu

2018-03-01

Full Text Available Corneal neovascularization (NV is the major sight-threatening pathology caused by angiogenic stimuli. Current drugs that directly target pro-angiogenic factors to inhibit or reverse the disease require multiple rounds of administration and have limited efficacies. Here, we identify potential anti-angiogenic corneal microRNAs (miRNAs and demonstrate a framework that employs discovered miRNAs as biotherapies deliverable by recombinant adeno-associated viruses (rAAVs. By querying differentially expressed miRNAs in neovascularized mouse corneas induced by alkali burn, we have revealed 39 miRNAs that are predicted to target more than 5,500 differentially expressed corneal mRNAs. Among these, we selected miR-204 and assessed its efficacy and therapeutic benefit for treating injured corneas. Our results show that delivery of miR-204 by rAAV normalizes multiple novel target genes and biological pathways to attenuate vascularization of injured mouse cornea. Importantly, this gene therapy treatment alternative is efficacious and safe for mitigating corneal NV. Overall, our work demonstrates the discovery of potential therapeutic miRNAs in corneal disorders and their translation into viable treatment alternatives.

RECORDING CULTURAL HERITAGE USING TERRESTRIAL LASERSCANNING – DEALING WITH THE SYSTEM, THE HUGE DATASETS THEY CREATE AND WAYS TO EXTRACT THE NECESSARY DELIVERABLES YOU CAN WORK WITH

Directory of Open Access Journals (Sweden)

E. Christofori

2013-07-01

Full Text Available Recording Cultural Heritage objects using terrestrial laserscanning becomes more and more popular over the last years. Since terrestrial Laserscanning System (TLS Manufacturers have strongly increased the amount and speed of data captured with a single scan at each system upgrade and cutting down system costs the use of TLS Systems for recording cultural heritage is an option for recording worth to think about beside traditional methods like Photogrammetric. TLS Systems can be a great tool for capturing complex cultural heritage object within a short amount of time beside the traditional methods but can be a nightmare to handle for further process if not used right while capturing. Furthermore TLS Systems still have to be recognized as survey equipment, even though some of the manufactures promote them as everyday tool. They have to be used in an intelligent way having in mind the clients and the individual cultural objects needs. Thus the efficient way to use TLS Systems for data recording becomes a relevant topic to deal with the huge Amount of data the Systems collect while recording. Already small projects can turn into huge Pointcloud Datasets that End user, like Architects or Archaeologist neither can't deal with as their technical equipment doesn't fit the requirements of the Dataset nor do they have the software tools to use the Data as the current software tools still are high prized. Even the necessary interpretation of the Dataset can be a tough task if the people who have to work on with the Pointcloud aren't educated right in order to understand TLS and the results it creates. The use of TLS Systems has to have in mind the project requirements of the individual Heritage Object, like the required accuracy, standards for Levels of Details (e.g. "Empfehlungen für die Baudokumentation, Günther Eckstein, Germany", the required kind of Deliverables (Visualization, 2D Drawings, True Deformation Drawings, 3D Models, BIM or 4D �

The effect of stent coating on stent deliverability: direct randomised comparison of drug eluting and bare metal stents using the same stent platform.

Science.gov (United States)

Siminiak, Tomasz; Link, Rafał; Wołoszyn, Maciej; Kałmucki, Piotr; Baszko, Artur

2012-01-01

There is certain experimental and clinical evidence indicating that the covering of bare metal stents (BMS) with drug eluting polymers to produce drug eluting stents (DES) results in increased stent stiffness and modifies the mechanical properties of the stent platform. In addition, it has been speculated that the mechanical performance of DES, compared to BMS, may be related to the type of polymer used to cover stents. We aimed at evaluating the deliverability of DES with a lactate based biodegradable polymer and BMS in patients with stable coronary artery disease in a prospective randomised study. One hundred eleven consecutive patients (age: 36-77, mean 58.8 years) scheduled for routine angioplasty due to stable coronary disease were randomised to receive BMS (Chopin II(TM), Balton, Poland) or paclitaxel eluting stent (Chopin Luc(TM), Balton, Poland) using the same metal platform. Only patients scheduled for angioplasty using the direct implantation technique of a single stent were randomised. The exclusion criteria included patients 〉 80 years, multivessel disease and reference diameter of the target vessel 〉 3.5 mm. In the BMS group (n = 55; 35 males and 20 females), the mean diameter of implanted stents was 3.09 ± 0.40 and the mean length was 11.37 ± 2.80, whereas in the DES group (n = 56; 34 males and 22 females) the mean stent sizes were 3.02 ± 0.34 and 17.90 ± 7.38 mm, respectively (p 〉 0.05 for length). The groups did not significantly differ regarding the frequency of stent implantation to particular coronary vessels. The direct stenting technique was attempted and failed, leading to the stents' implantation after predilatation in five patients in the BMS group and six patients in the DES group. Failure of stent implantation and subsequent implantation of another stent type was observed in no BMS patients and in one DES patient (NS). Although stent covering with lactate based drug eluting polymer may increase its stiffness, it does not affect

User Requirements for PN to Drive the Definition of a Valid Architecture

DEFF Research Database (Denmark)

Olesen, H.; Jiang, B.; Butkus, A.

This deliverable presents a comprehensive survey of all the user scenarios, cases and case studies that have been analysed and proposed within the first year of the MAGNET project. Among the 11 cases presented in this report, 5 of them are presented in separate chapters with a catalogue of scenario...

Deliverable 6.2 - Software: upgraded MC simulation tools capable of simulating a complete in-beam ET experiment, from the beam to the detected events. Report with the description of one (or few) reference clinical case(s), including the complete patient model and beam characteristics

CERN Document Server

The ENVISION Collaboration

2014-01-01

Deliverable 6.2 - Software: upgraded MC simulation tools capable of simulating a complete in-beam ET experiment, from the beam to the detected events. Report with the description of one (or few) reference clinical case(s), including the complete patient model and beam characteristics

Advantages and limitations of navigation-based multicriteria optimization (MCO) for localized prostate cancer IMRT planning

International Nuclear Information System (INIS)

McGarry, Conor K.; Bokrantz, Rasmus; O’Sullivan, Joe M.; Hounsell, Alan R.

2014-01-01

Efficacy of inverse planning is becoming increasingly important for advanced radiotherapy techniques. This study’s aims were to validate multicriteria optimization (MCO) in RayStation (v2.4, RaySearch Laboratories, Sweden) against standard intensity-modulated radiation therapy (IMRT) optimization in Oncentra (v4.1, Nucletron BV, the Netherlands) and characterize dose differences due to conversion of navigated MCO plans into deliverable multileaf collimator apertures. Step-and-shoot IMRT plans were created for 10 patients with localized prostate cancer using both standard optimization and MCO. Acceptable standard IMRT plans with minimal average rectal dose were chosen for comparison with deliverable MCO plans. The trade-off was, for the MCO plans, managed through a user interface that permits continuous navigation between fluence-based plans. Navigated MCO plans were made deliverable at incremental steps along a trajectory between maximal target homogeneity and maximal rectal sparing. Dosimetric differences between navigated and deliverable MCO plans were also quantified. MCO plans, chosen as acceptable under navigated and deliverable conditions resulted in similar rectal sparing compared with standard optimization (33.7 ± 1.8 Gy vs 35.5 ± 4.2 Gy, p = 0.117). The dose differences between navigated and deliverable MCO plans increased as higher priority was placed on rectal avoidance. If the best possible deliverable MCO was chosen, a significant reduction in rectal dose was observed in comparison with standard optimization (30.6 ± 1.4 Gy vs 35.5 ± 4.2 Gy, p = 0.047). Improvements were, however, to some extent, at the expense of less conformal dose distributions, which resulted in significantly higher doses to the bladder for 2 of the 3 tolerance levels. In conclusion, similar IMRT plans can be created for patients with prostate cancer using MCO compared with standard optimization. Limitations exist within MCO regarding conversion of navigated plans to

APOLLON. Multi-APprOach for high efficiency integrated and inteLLigent cONcentrating PV modules (Systems). Deliverable 7.10. Publication of environmental LCI dataset

Energy Technology Data Exchange (ETDEWEB)

Olson, C.L. [ECN Solar Energy, Petten (Netherlands)

2013-10-15

This deliverable makes available the life-cycle inventory used to calculate the energy payback time and the carbon footprint of the Apollon final concentrating photovoltaics (CPV) design developed.. The data below relates to one Apollon module. The results are to be published in Environmental Science and Technology, in a paper, 'Sustainability of Materials and Costs of Materials in a Mirror-based Concentrating Photovoltaic System'. Reference is made to the results for the Spectrolab triple junction solar cell in the following two studies: (1) 'Life cycle assessment of high-concentration photovoltaic systems' (Prog. Photovolt: Res. Appl., vol. 21, pp. 379-388, 2013), and (2) 'Life Cycle Analysis of Two New Concentrator PV Systems', in 23rd European Photovoltaic Solar Energy Conference, Valencia, Spain, 2008.

Report on the model developments in the sectoral assessments

DEFF Research Database (Denmark)

Iglesias, Ana; Termansen, Mette; Bouwer, Laurens

2014-01-01

into the economic assessments. At the same time, the models will link to the case studies in two ways. First, they use the data in the case studies for model validation and then they provide information to inform stakeholders on adaptation strategies. Therefore, Deliverable 3.2 aims to address three main questions......The Objective of this Deliverable D3.2 is to describe the models developed in BASE that is, the experimental setup for the sectoral modelling. The model development described in this deliverable will then be implemented in the adaptation and economic analysis in WP6 in order to integrate adaptation......: How to address climate adaptation options with the sectoral bottom-up models? - This includes a quantification of the costs of adaptation with the sectoral models, in monetary terms or in other measures of costs. The benefits in this framework will be the avoided damages, therefore a measure...

Conclusions and summaries of feed-back comments from participating countries. Deliverable D18

International Nuclear Information System (INIS)

Drottz Sjoeberg, Britt-Marie; Richardson, Phil; Pritrsky, Jozef

2009-12-01

Deliverable 18 is focused on the principal components of risk communication strategies and based on actual experiences from different cultural settings in relation to nuclear waste management (NWM) issues. Essentially it describes how the ideas were presented and developed within the 3rd year of the ARGONA project, in sub-workpackage 4.1. The intention of this work was to delineate good risk communication approaches across national borders, as well as to specify the circumstances that require more specific and unique national or group considerations. Our aim was to provide an in-depth analysis of societal patterns and trends regarding the management of nuclear wastes on the basis of a number of individual participants' understanding and open discussion of the issue between themselves and across the heterogeneous groups represented. To meet these goals we involved a number of stakeholders from ARGONA participating countries (UK, Sweden, Slovakia, Czech Republic) in a one-day focus group in September 2009. Their task was to provide comments on the strategies for risk communication that have emanated from the various interest groups within the different countries. Another reason for their engagement was to elicit their comments on the central features of existing materials and thus point to any strengths and weaknesses associated with various risk communication techniques and more composite risk communication strategies. The results obtained reflect the opinions and sentiments related to risks and safety of various groups in civil society within the participating countries. We also believe that the work performed in D18 fits well into the transparency framework provided in the RISCOM model. This model was successfully used in Sweden and has actually also been applied in the Czech Republic within the ARGONA project. It was shown that if applied in practice this model has a high potential for improving transparency related to consensus building in the NWM area

Community Solar Value Project

Energy Technology Data Exchange (ETDEWEB)

Powers, John T [Extensible Energy; Cliburn, Jill [Cliburn and Associates

2017-11-30

The Community Solar Value Project (CSVP) is designed to assist electric utilities in designing better community solar programs. Better programs seek new sources of value to promote “win-win” solutions between utilities and their customers. The CSVP focused on five “challenge areas” in identifying new sources of value: - Strategic solar design for community solar projects (including technology choices, siting, orientation, and related issues) - Market research and targeted marketing approaches (for program design and for customer recruitment) - Procurement and financing (for establishing best practices that can bring economies of scale and economies of expertise) - Integration of “companion measures” (such as storage and demand-response options that can benefit customer and utility net load shapes) - Pricing in program design (including best practices for integration of identified value in program prices or credits) The CSVP directly engaged the Sacramento Municipal Utility District (SMUD), the Public Service Company of New Mexico (PNM), and more than a dozen other utilities to develop improved community solar program designs. The outcomes include a plan at SMUD for over 100 MW or more of community and shared solar and support for new or expanded programs at 15 other utilities so far. Resulting best-practice solutions have not only informed program applications, but also have generated discussion among experts and industry associations about the new opportunities and challenges CSVP has brought forth. In these ways, the CSVP has impacted community solar programs and DER plans, competitive innovations and policies nationwide. The CSVP team has been led by Extensible Energy under John Powers, President and CEO. Jill Cliburn, of Santa Fe, NM-based Cliburn and Associates, has served as Principal Investigator. The team also benefitted from expertise from Navigant, Olivine Inc. and Millennium Energy, LLC, in addition to the collaborative and cost

A theory of cross-validation error

OpenAIRE

Turney, Peter D.

1994-01-01

This paper presents a theory of error in cross-validation testing of algorithms for predicting real-valued attributes. The theory justifies the claim that predicting real-valued attributes requires balancing the conflicting demands of simplicity and accuracy. Furthermore, the theory indicates precisely how these conflicting demands must be balanced, in order to minimize cross-validation error. A general theory is presented, then it is developed in detail for linear regression and instance-bas...

A fundamental special-relativistic theory valid for all real-valued speeds

Directory of Open Access Journals (Sweden)

Vedprakash Sewjathan

1984-01-01

Full Text Available This paper constitutes a fundamental rederivation of special relativity based on the c-invariance postulate but independent of the assumption ds′2=±ds2 (Einstein [1], Kittel et al [2], Recami [3], the equivalence principle, homogeneity of space-time, isotropy of space, group properties and linearity of space-time transformations or the coincidence of the origins of inertial space-time frames. The mathematical formalism is simpler than Einstein's [4] and Recami's [3]. Whilst Einstein's subluminal and Recami's superluminal theories are rederived in this paper by further assuming the equivalence principle and “mathematical inverses” [4,3], this paper derives (independent of these assumptions with physico-mathematical motivation an alternate singularity-free special-relativistic theory which replaces Einstein's factor [1/(1−V2/c2]12 and Recami's extended-relativistic factor [1/(V2/c2−1]12 by [(1−(V2/c2n/(1−V2/c2]12, where n equals the value of (m(V/m02 as |V|→c. In this theory both Newton's and Einstein's subluminal theories are experimentally valid on account of negligible terms. This theory implies that non-zero rest mass luxons will not be detected as ordinary non-zero rest mass bradyons because of spatial collapse, and non-zero rest mass tachyons are undetectable because they exist in another cosmos, resulting in a supercosmos of matter, with the possibility of infinitely many such supercosmoses, all moving forward in time. Furthermore this theory is not based on any assumption giving rise to the twin paradox controversy. The paper concludes with a discussion of the implications of this theory for general relativity.

Validation of equations and proposed reference values to estimate fat mass in Chilean university students.

Science.gov (United States)

Gómez Campos, Rossana; Pacheco Carrillo, Jaime; Almonacid Fierro, Alejandro; Urra Albornoz, Camilo; Cossío-Bolaños, Marco

2018-03-01

(i) To propose regression equations based on anthropometric measures to estimate fat mass (FM) using dual energy X-ray absorptiometry (DXA) as reference method, and (ii)to establish population reference standards for equation-derived FM. A cross-sectional study on 6,713 university students (3,354 males and 3,359 females) from Chile aged 17.0 to 27.0years. Anthropometric measures (weight, height, waist circumference) were taken in all participants. Whole body DXA was performed in 683 subjects. A total of 478 subjects were selected to develop regression equations, and 205 for their cross-validation. Data from 6,030 participants were used to develop reference standards for FM. Equations were generated using stepwise multiple regression analysis. Percentiles were developed using the LMS method. Equations for men were: (i) FM=-35,997.486 +232.285 *Weight +432.216 *CC (R 2 =0.73, SEE=4.1); (ii)FM=-37,671.303 +309.539 *Weight +66,028.109 *ICE (R2=0.76, SEE=3.8), while equations for women were: (iii)FM=-13,216.917 +461,302 *Weight+91.898 *CC (R 2 =0.70, SEE=4.6), and (iv) FM=-14,144.220 +464.061 *Weight +16,189.297 *ICE (R 2 =0.70, SEE=4.6). Percentiles proposed included p10, p50, p85, and p95. The developed equations provide valid and accurate estimation of FM in both sexes. The values obtained using the equations may be analyzed from percentiles that allow for categorizing body fat levels by age and sex. Copyright © 2017 SEEN y SED. Publicado por Elsevier España, S.L.U. All rights reserved.

Validation philosophy

International Nuclear Information System (INIS)

Vornehm, D.

1994-01-01

To determine when a set of calculations falls within an umbrella of an existing validation documentation, it is necessary to generate a quantitative definition of range of applicability (our definition is only qualitative) for two reasons: (1) the current trend in our regulatory environment will soon make it impossible to support the legitimacy of a validation without quantitative guidelines; and (2) in my opinion, the lack of support by DOE for further critical experiment work is directly tied to our inability to draw a quantitative open-quotes line-in-the-sandclose quotes beyond which we will not use computer-generated values

Validation of Shear Wave Elastography Cutoff Values on the Supersonic Aixplorer for Practical Clinical Use in Liver Fibrosis Staging.

Science.gov (United States)

Dhyani, Manish; Grajo, Joseph R; Bhan, Atul K; Corey, Kathleen; Chung, Raymond; Samir, Anthony E

2017-06-01

The purpose of this study was to determine the validity of previously established ultrasound shear wave elastography (SWE) cut-off values (≥F2 fibrosis) on an independent cohort of patients with chronic liver disease. In this cross-sectional study, approved by the institutional review board and compliant with the Health Insurance Portability and Accountability Act, 338 patients undergoing liver biopsy underwent SWE using an Aixplorer ultrasound machine (SuperSonic Imagine, Aix-en-Provence, France). Median SWE values were calculated from sets of 10 elastograms. A single blinded pathologist evaluated METAVIR fibrosis staging as the gold standard. The study analyzed 277 patients with a mean age of 48 y. On pathologic examination, 212 patients (76.5%) had F0-F1 fibrosis, whereas 65 (23.5%) had ≥F2 fibrosis. Spearman's correlation of fibrosis with SWE was 0.456 (p Aixplorer SWE system. Copyright © 2017 World Federation for Ultrasound in Medicine & Biology. Published by Elsevier Inc. All rights reserved.

Effects of Formation Damage on Productivity of Underground Gas Storage Reservoirs

Directory of Open Access Journals (Sweden)

C.I.C. Anyadiegwu

2013-12-01

Full Text Available Analysis of the effects of formation damage on the productivity of gas storage reservoirs was performed with depleted oil reservoir (OB-02, located onshore, Niger Delta, Nigeria. Information on the reservoir and the fluids from OB-02 were collected and used to evaluate the deliverabilities of the gas storage reservoir over a 10-year period of operation. The results obtained were used to plot graphs of deliverability against permeability and skin respectively. The graphs revealed that as the permeability decreased, the skin increased, and hence a decrease in deliverability of gas from the reservoir during gas withdrawal. Over the ten years of operating the reservoir for gas storage, the deliverability and permeability which were initially 2.7 MMscf/d and 50 mD, with a skin of 0.2, changed to new values of 0.88 MMscf/d and 24 mD with the skin as 4.1 at the tenth year.

Measuring Values in Environmental Research: A Test of an Environmental Portrait Value Questionnaire

Science.gov (United States)

Bouman, Thijs; Steg, Linda; Kiers, Henk A. L.

2018-01-01

Four human values are considered to underlie individuals’ environmental beliefs and behaviors: biospheric (i.e., concern for environment), altruistic (i.e., concern for others), egoistic (i.e., concern for personal resources) and hedonic values (i.e., concern for pleasure and comfort). These values are typically measured with an adapted and shortened version of the Schwartz Value Survey (SVS), to which we refer as the Environmental-SVS (E-SVS). Despite being well-validated, recent research has indicated some concerns about the SVS methodology (e.g., comprehensibility, self-presentation biases) and suggested an alternative method of measuring human values: The Portrait Value Questionnaire (PVQ). However, the PVQ has not yet been adapted and applied to measure values most relevant to understand environmental beliefs and behaviors. Therefore, we tested the Environmental-PVQ (E-PVQ) – a PVQ variant of E-SVS –and compared it with the E-SVS in two studies. Our findings provide strong support for the validity and reliability of both the E-SVS and E-PVQ. In addition, we find that respondents slightly preferred the E-PVQ over the E-SVS (Study 1). In general, both scales correlate similarly to environmental self-identity (Study 1), energy behaviors (Studies 1 and 2), pro-environmental personal norms, climate change beliefs and policy support (Study 2). Accordingly, both methodologies show highly similar results and seem well-suited for measuring human values underlying environmental behaviors and beliefs. PMID:29743874

A Validation Study of the Impression Replica Technique.

Science.gov (United States)

Segerström, Sofia; Wiking-Lima de Faria, Johanna; Braian, Michael; Ameri, Arman; Ahlgren, Camilla

2018-04-17

To validate the well-known and often-used impression replica technique for measuring fit between a preparation and a crown in vitro. The validation consisted of three steps. First, a measuring instrument was validated to elucidate its accuracy. Second, a specimen consisting of male and female counterparts was created and validated by the measuring instrument. Calculations were made for the exact values of three gaps between the male and female. Finally, impression replicas were produced of the specimen gaps and sectioned into four pieces. The replicas were then measured with the use of a light microscope. The values received from measuring the specimen were then compared with the values received from the impression replicas, and the technique was thereby validated. The impression replica technique overvalued all measured gaps. Depending on location of the three measuring sites, the difference between the specimen and the impression replicas varied from 47 to 130 μm. The impression replica technique overestimates gaps within the range of 2% to 11%. The validation of the replica technique enables the method to be used as a reference when testing other methods for evaluating fit in dentistry. © 2018 by the American College of Prosthodontists.

Does an eye-hand coordination test have added value as part of talent identification in table tennis? A validity and reproducibility study.

Science.gov (United States)

Faber, Irene R; Oosterveld, Frits G J; Nijhuis-Van der Sanden, Maria W G

2014-01-01

This study investigated the added value, i.e. discriminative and concurrent validity and reproducibility, of an eye-hand coordination test relevant to table tennis as part of talent identification. Forty-three table tennis players (7-12 years) from national (n = 13), regional (n = 11) and local training centres (n = 19) participated. During the eye-hand coordination test, children needed to throw a ball against a vertical positioned table tennis table with one hand and to catch the ball correctly with the other hand as frequently as possible in 30 seconds. Four different test versions were assessed varying the distance to the table (1 or 2 meter) and using a tennis or table tennis ball. 'Within session' reproducibility was estimated for the two attempts of the initial tests and ten youngsters were retested after 4 weeks to estimate 'between sessions' reproducibility. Validity analyses using age as covariate showed that players from the national and regional centres scored significantly higher than players from the local centre in all test versions (ptalent identification appears to be the version with a table tennis ball at 1 meter regarding the psychometric characteristics evaluated. Longitudinal studies are necessary to evaluate the predictive value of this test.

The diagnostic value of specific IgE to Ara h 2 to predict peanut allergy in children is comparable to a validated and updated diagnostic prediction model.

Science.gov (United States)

Klemans, Rob J B; Otte, Dianne; Knol, Mirjam; Knol, Edward F; Meijer, Yolanda; Gmelig-Meyling, Frits H J; Bruijnzeel-Koomen, Carla A F M; Knulst, André C; Pasmans, Suzanne G M A

2013-01-01

A diagnostic prediction model for peanut allergy in children was recently published, using 6 predictors: sex, age, history, skin prick test, peanut specific immunoglobulin E (sIgE), and total IgE minus peanut sIgE. To validate this model and update it by adding allergic rhinitis, atopic dermatitis, and sIgE to peanut components Ara h 1, 2, 3, and 8 as candidate predictors. To develop a new model based only on sIgE to peanut components. Validation was performed by testing discrimination (diagnostic value) with an area under the receiver operating characteristic curve and calibration (agreement between predicted and observed frequencies of peanut allergy) with the Hosmer-Lemeshow test and a calibration plot. The performance of the (updated) models was similarly analyzed. Validation of the model in 100 patients showed good discrimination (88%) but poor calibration (P original model: sex, skin prick test, peanut sIgE, and total IgE minus sIgE. When building a model with sIgE to peanut components, Ara h 2 was the only predictor, with a discriminative ability of 90%. Cutoff values with 100% positive and negative predictive values could be calculated for both the updated model and sIgE to Ara h 2. In this way, the outcome of the food challenge could be predicted with 100% accuracy in 59% (updated model) and 50% (Ara h 2) of the patients. Discrimination of the validated model was good; however, calibration was poor. The discriminative ability of Ara h 2 was almost comparable to that of the updated model, containing 4 predictors. With both models, the need for peanut challenges could be reduced by at least 50%. Copyright © 2012 American Academy of Allergy, Asthma & Immunology. Published by Mosby, Inc. All rights reserved.

Tank 241-BY-112, cores 174 and 177 analytical results for the final report

International Nuclear Information System (INIS)

Nuzum, J.L.

1997-01-01

Results from bulk density tests ranged from 1.03 g/mL to 1.86 g/mL. The highest bulk density result of 1.86 g/mL was used to calculate the solid total alpha activity notification limit for this tank (33.1 uCi/g), Total Alpha (AT) Analysis. Attachment 2 contains the Data Verification and Deliverable (DVD) Summary Report for AT analyses. This report summarizes results from AT analyses and provides data qualifiers and total propagated uncertainty (TPU) values for results. The TPU values are based on the uncertainties inherent in each step of the analysis process. They may be used as an additional reference to determine reasonable RPD values which may be used to accept valid data that do not meet the TSAP acceptance criteria. A report guide is provided with the report to assist in understanding this summary report

Reliabilities of genomic estimated breeding values in Danish Jersey

DEFF Research Database (Denmark)

Thomasen, Jørn Rind; Guldbrandtsen, Bernt; Su, Guosheng

2012-01-01

In order to optimize the use of genomic selection in breeding plans, it is essential to have reliable estimates of the genomic breeding values. This study investigated reliabilities of direct genomic values (DGVs) in the Jersey population estimated by three different methods. The validation methods...... were (i) fivefold cross-validation and (ii) validation on the most recent 3 years of bulls. The reliability of DGV was assessed using squared correlations between DGV and deregressed proofs (DRPs). In the recent 3-year validation model, estimated reliabilities were also used to assess the reliabilities...... of DGV. The data set consisted of 1003 Danish Jersey bulls with conventional estimated breeding values (EBVs) for 14 different traits included in the Nordic selection index. The bulls were genotyped for Single-nucleotide polymorphism (SNP) markers using the Illumina 54 K chip. A Bayesian method was used...

Strategy for Ranking the Science Value of the Surface of Asteroid 101955 Bennu for Sample Site Selection for Osiris-REx

Science.gov (United States)

Nakamura-Messenger, K.; Connolly, H. C., Jr.; Lauretta, D. S.

2014-01-01

OSRIS-REx is NASA's New Frontiers 3 sample return mission that will return at least 60 g of pristine surface material from near-Earth asteroid 101955 Bennu in September 2023. The scientific value of the sample increases enormously with the amount of knowledge captured about the geological context from which the sample is collected. The OSIRIS-REx spacecraft is highly maneuverable and capable of investigating the surface of Bennu at scales down to the sub-cm. The OSIRIS-REx instruments will characterize the overall surface geology including spectral properties, microtexture, and geochemistry of the regolith at the sampling site in exquisite detail for up to 505 days after encountering Bennu in August 2018. The mission requires at the very minimum one acceptable location on the asteroid where a touch-and-go (TAG) sample collection maneuver can be successfully per-formed. Sample site selection requires that the follow-ing maps be produced: Safety, Deliverability, Sampleability, and finally Science Value. If areas on the surface are designated as safe, navigation can fly to them, and they have ingestible regolith, then the scientific value of one site over another will guide site selection.

Supply chain finance, its practical relevance and strategic value : the supply chain finance essential knowledge series

NARCIS (Netherlands)

Ronald de Boer; Michiel Steeman; Matthijs van Bergen

2015-01-01

This paper is a deliverable of the research program called SCF 2.0 and supported by TKI-Dinalog1. The foundation setting nature of this paper reflects the ambition of this research project that aims to accele-rate the understanding, development and adoption of supply chain finance models. The goal

Safety at Work : Research Methodology

NARCIS (Netherlands)

Beurden, van K. (Karin); Boer, de J. (Johannes); Brinks, G. (Ger); Goering-Zaburnenko, T. (Tatiana); Houten, van Y. (Ynze); Teeuw, W. (Wouter)

2012-01-01

In this document, we provide the methodological background for the Safety atWork project. This document combines several project deliverables as defined inthe overall project plan: validation techniques and methods (D5.1.1), performanceindicators for safety at work (D5.1.2), personal protection

Work Values of Mortuary Science Students

Science.gov (United States)

Shaw, Thomas; Duys, David K.

2005-01-01

This article describes a descriptive study in an area significantly lacking validation. The focus of the study was the work values held by mortuary science students from 3 educational programs in the Midwest. The Values Scale (D. Nevill & D. Super, 1989) was used to measure the career-related values of a sample group of 116. According to…

Value management : functional expression of the need and functional performance specification : requirements for expressing and validating the need to be satisfied within the process of purchasing or obtaining a product

CERN Document Server

Association Française de Normalisation. Paris

2013-01-01

Value management : functional expression of the need and functional performance specification : requirements for expressing and validating the need to be satisfied within the process of purchasing or obtaining a product

Combined analysis of 19 common validated type 2 diabetes susceptibility gene variants shows moderate discriminative value and no evidence of gene-gene interaction

DEFF Research Database (Denmark)

Sparsø, T; Grarup, N; Andreasen, C.

2009-01-01

study; and additional type 2 diabetic patients and glucose-tolerant individuals. The case-control studies involved 4,093 type 2 diabetic patients and 5,302 glucose-tolerant individuals. RESULTS: Single-variant analyses demonstrated allelic odds ratios ranging from 1.04 (95% CI 0.98-1.11) to 1.33 (95% CI...... analysis of the 19 validated variants enables detection of subgroups at substantially increased risk of type 2 diabetes; however, the discrimination between glucose-tolerant and type 2 diabetes individuals is still too inaccurate to achieve clinical value.......AIMS/HYPOTHESIS: The list of validated type 2 diabetes susceptibility variants has recently been expanded from three to 19. The variants identified are common and have low penetrance in the general population. The aim of the study is to investigate the combined effect of the 19 variants by applying...

Assessment of values in university students

Directory of Open Access Journals (Sweden)

Francisco Manuel MORALES RODRÍGUEZ

2014-03-01

Full Text Available This paper reports the results of a questionnaire for assessing social values in university students (VASOL. Increasingly, society demands that its professionals must know how to cope with complexity, considering the human and social aspects of such situations. The European Higher Education Area (ehea has emphasized the interest in training future professionals as agents of social change, not only as regards the creation and management of new knowledge but also in the action of citizens who contribute to greater social cohesion. This research team has developed a new questionnaire to assess social justice and solidarity values. The questionnaire revealed a unifactorial configuration coherent with the theory. A sample of 945 university students completed the VASOL and these were subjected to a series of instruments aimed at evaluating the validity of the questionnaire. The VASOL proved to be a reliable and valid instrument. We discuss the usefulness of this new instrument for the screening of social justice and solidarity values, specifically for their detection, and for assessing social or interpersonal skills in the current model of the ehea and validation of psycho-educational programs.

Shapley Value for Constant-sum Games

NARCIS (Netherlands)

Khmelnitskaya, A.B.

2002-01-01

It is proved that Young's axiomatization for the Shapley value by marginalism, efficiency, and symmetry is still valid for the Shapley value defined on the class of nonnegative constant-sum games and on the entire class of constant-sum games as well. To support an interest to study the class of

The δ13C Value of Fingerstick Blood Is a Valid, Reliable, and Sensitive Biomarker of Sugar-Sweetened Beverage Intake in Children and Adolescents.

Science.gov (United States)

MacDougall, Carly R; Hill, Catelyn E; Jahren, A Hope; Savla, Jyoti; Riebl, Shaun K; Hedrick, Valisa E; Raynor, Hollie A; Dunsmore, Julie C; Frisard, Madlyn I; Davy, Brenda M

2018-01-01

Reliance on self-reported dietary intake methods is a commonly cited research limitation, and dietary misreporting is a particular problem in children and adolescents. Objective indicators of dietary intake, such as dietary biomarkers, are needed to overcome this research limitation. The added sugar (AS) biomarker δ13C, which measures the relative abundance of 13C to 12C, has demonstrated preliminary validity in adults. The purpose of this investigation was to determine the comparative validity, test-retest reliability, and sensitivity of the δ13C biomarker to detect AS and sugar-sweetened beverage (SSB) intake using fingerstick blood samples in children and adolescents. Children (aged 6-11 y, n = 126, 56% male, mean ± SD age: 9 ± 2 y) and adolescents (aged 12-18 y, n = 200, 44% male, mean ± SD age: 15 ± 2 y) completed 4 testing sessions within a 3-wk period. Participants' height, weight, demographic characteristics, and health history were determined at the first session; 24-h recalls were obtained at each visit and fingerstick blood samples were collected at visits 1 and 3. Samples were analyzed for δ13C value using natural abundance stable isotope mass spectrometry. δ13C value was compared with dietary outcomes in the full sample, and in child and adolescent subgroups. t Tests and correlational analyses were used to assess biomarker validity and reliability, whereas logistic regression and area under the receiver-operator characteristic curve (AUC) were used to evaluate sensitivity. Reported mean ± SD AS consumption was 82.2 ± 35.8 g/d and 329 ± 143 kcal/d, and SSB consumption was 222 ± 243 mL/d and 98 ± 103 kcal/d. Mean δ13C value was -19.65 ± 0.69‰, and was lower in children than in adolescents (-19.80 ± 0.67‰ compared with -19.56 ± 0.67‰, P = 0.002). δ13C values were similar across sessions (visit 1: -19.66 ± 0.68‰; visit 3: -19.64 ± 0.68‰; r = 0.99, P AUC (0.75 and 0.62, respectively). The δ13C biomarker is a promising

Development of a Values Conflict Resolution Assessment.

Science.gov (United States)

Kinnier, Richard T.

1987-01-01

Describes the development of a Values Conflict Resolution Assessment (VCRA) and reports on validation and reliability. Items were constructed from theoretical criteria in values clarification and decision making with "ethical-emotional" and "rational-behavioral" components. VCRA scores correlated negatively with…

CRISP. Dependable ICT Support of Power Grid Operations

Energy Technology Data Exchange (ETDEWEB)

Gustavsson, R.; Mellstrand, P.; Tornqvist, B. [Blekinge Institute of Technology BTH, Karlskrona (Sweden); Akkermans, H. [EnerSearch, Malmoe (Sweden)

2005-03-15

This deliverable D2.4 Dependable ICT support 0f Power Grid Operations is a link between deliverable D1.6 Information security models and their economics and planned activities in WP III, that is, Implementation, Experiments and Tests. Background CRISP material includes deliverables of D2.2 Design document and multi-agent simulation tool for distributed demand-supply matching and D2.3 Design document and simulation tool for diagnostics of high-DG power networks. Furthermore there are links between this document and the deliverable D1.7 Report on distributed network architectures and D1.8 Reports on case study simulations and results. In short, this document specifies and extends the general background on security models and dependability models of deliverable D1.6 with CRISP specific material of D2.2 and D2.4 towards the experiments and tests of WP III. The focus of this deliverable is on dependable ICT support of power grid operation. By recasting the three CRISP experiments into three Scenarios in Chapter 2 we claim that we have a good description of benefits and challenges related to future virtual utilities. Among the challenges are securing trustworthy operation from a technical operation side (avoid disturbances such as blackouts) as wee as from a user-centric business point of view (value added power related services). Our investigation on proper means to safeguard operations of future virtual utilities begins with an assessment of lessons learned from recent (2003) big blackouts worldwide in Chapter 3. We propose an accident diagnosis and repair model (STAMP in Section 3.2) suitable for the complex socio-technical system we envisage for future cell-based virtual utilities. From this analysis and the background material from deliverable D1.6 Information security models and their economics, we then reassess the dependability concerns related to the CRISP related scenarios of Chapter 2. The deliverable provides some novel ideas and models that we claim are

CRISP. Dependable ICT Support of Power Grid Operations

International Nuclear Information System (INIS)

Gustavsson, R.; Mellstrand, P.; Tornqvist, B.; Akkermans, H.

2005-03-01

This deliverable D2.4 Dependable ICT support 0f Power Grid Operations is a link between deliverable D1.6 Information security models and their economics and planned activities in WP III, that is, Implementation, Experiments and Tests. Background CRISP material includes deliverables of D2.2 Design document and multi-agent simulation tool for distributed demand-supply matching and D2.3 Design document and simulation tool for diagnostics of high-DG power networks. Furthermore there are links between this document and the deliverable D1.7 Report on distributed network architectures and D1.8 Reports on case study simulations and results. In short, this document specifies and extends the general background on security models and dependability models of deliverable D1.6 with CRISP specific material of D2.2 and D2.4 towards the experiments and tests of WP III. The focus of this deliverable is on dependable ICT support of power grid operation. By recasting the three CRISP experiments into three Scenarios in Chapter 2 we claim that we have a good description of benefits and challenges related to future virtual utilities. Among the challenges are securing trustworthy operation from a technical operation side (avoid disturbances such as blackouts) as wee as from a user-centric business point of view (value added power related services). Our investigation on proper means to safeguard operations of future virtual utilities begins with an assessment of lessons learned from recent (2003) big blackouts worldwide in Chapter 3. We propose an accident diagnosis and repair model (STAMP in Section 3.2) suitable for the complex socio-technical system we envisage for future cell-based virtual utilities. From this analysis and the background material from deliverable D1.6 Information security models and their economics, we then reassess the dependability concerns related to the CRISP related scenarios of Chapter 2. The deliverable provides some novel ideas and models that we claim are

Different Diagnosis, Shared Vulnerabilities: The Value of Cross Disorder Validation of Capacity to Consent.

Science.gov (United States)

Rosen, Allyson; Weitlauf, Julie C

2015-01-01

A screening measure of capacity to consent can provide an efficient method of determining the appropriateness of including individuals from vulnerable patient populations in research, particularly in circumstances in which no caregiver is available to provide surrogate consent. Seaman et al. (2015) cross-validate a measure of capacity to consent to research developed by Jeste et al. (2007). They provide data on controls, caregivers, and patients with mild cognitive impairment and dementia. The study demonstrates the importance of validating measures across disorders with different domains of incapacity, as well as the need for timely and appropriate follow-up with potential participants who yield positive screens. Ultimately clinical measures need to adapt to the dimensional diagnostic approaches put forward in DSM 5. Integrative models of constructs, such as capacity to consent, will make this process more efficient by avoiding the need to test measures in each disorder. Until then, cross-validation studies, such as the work by Seaman et al. (2015) are critical.

The validity and value of inclusive fitness theory.

Science.gov (United States)

Bourke, Andrew F G

2011-11-22

Social evolution is a central topic in evolutionary biology, with the evolution of eusociality (societies with altruistic, non-reproductive helpers) representing a long-standing evolutionary conundrum. Recent critiques have questioned the validity of the leading theory for explaining social evolution and eusociality, namely inclusive fitness (kin selection) theory. I review recent and past literature to argue that these critiques do not succeed. Inclusive fitness theory has added fundamental insights to natural selection theory. These are the realization that selection on a gene for social behaviour depends on its effects on co-bearers, the explanation of social behaviours as unalike as altruism and selfishness using the same underlying parameters, and the explanation of within-group conflict in terms of non-coinciding inclusive fitness optima. A proposed alternative theory for eusocial evolution assumes mistakenly that workers' interests are subordinate to the queen's, contains no new elements and fails to make novel predictions. The haplodiploidy hypothesis has yet to be rigorously tested and positive relatedness within diploid eusocial societies supports inclusive fitness theory. The theory has made unique, falsifiable predictions that have been confirmed, and its evidence base is extensive and robust. Hence, inclusive fitness theory deserves to keep its position as the leading theory for social evolution.

ADAM adaptation and mitigation strategies: supporting European climate policy. Deliverable D3 of work package M1 (code D-M1.3). ADAM 2-degree scenario for Europe - policies and impacts

Energy Technology Data Exchange (ETDEWEB)

Schade, Wolfgang; Jochem, Eberhard; Barker, Terry [and others

2009-07-31

ADAM research identifies and appraises existing and new policy options that can contribute to different combinations of adaptation and mitigation strategies. These options address the demands a changing climate will place on protecting citizens and valuable ecosystems - i.e., adaptation - as well as addressing the necessity to restrain/control humankind's perturbation to global climate to a desirable level - i.e., mitigation. The work package Mitigation 1 (Ml) has the core objective to simulate mitigation options and their related costs for Europe until 2050 and 2100 respectively. The focus of this deliverable is on the period 2005 to 2050. The long-term period until 2100 is covered in the previous deliverable D2, applying the POLES model for this time horizon. The analysis constitutes basically a techno-economic analysis. Depending on the sector analyzed it is either directly combined with a policy analysis (e.g. in the transport sector, renewables sector) or the policy analysis is performed qualitatively as a subsequent and independent step after the techno-economic analysis is completed (e.g. in the residential and service sectors). The book includes the following chapters: scenarios and macroeconomic assumptions; methodological issues analyzing mitigation options; the integrated global energy model POLES and its projections for the reference and 2 deg C scenarios; forest and basic materials sector; residential sector in Europe; the service (tertiary) and the primary sectors in Europe; basic products and other manufacturing industry sectors; transport sectors in Europe; renewable sector in Europe; conversion sector in Europe; syntheses and sectoral analysis in Europe; macroeconomic impacts of climate policy in the EU; the effects of the financial crisis on baseline simulations with implications for climate policy modeling: an analysis using the global model E3MG 2008-2012; conclusions and policy recommendations.

ADAM adaptation and mitigation strategies: supporting European climate policy. Deliverable D3 of work package M1 (code D-M1.3). ADAM 2-degree scenario for Europe - policies and impacts

Energy Technology Data Exchange (ETDEWEB)

Schade, Wolfgang; Jochem, Eberhard; Barker, Terry (and others)

2009-07-31

ADAM research identifies and appraises existing and new policy options that can contribute to different combinations of adaptation and mitigation strategies. These options address the demands a changing climate will place on protecting citizens and valuable ecosystems - i.e., adaptation - as well as addressing the necessity to restrain/control humankind's perturbation to global climate to a desirable level - i.e., mitigation. The work package Mitigation 1 (Ml) has the core objective to simulate mitigation options and their related costs for Europe until 2050 and 2100 respectively. The focus of this deliverable is on the period 2005 to 2050. The long-term period until 2100 is covered in the previous deliverable D2, applying the POLES model for this time horizon. The analysis constitutes basically a techno-economic analysis. Depending on the sector analyzed it is either directly combined with a policy analysis (e.g. in the transport sector, renewables sector) or the policy analysis is performed qualitatively as a subsequent and independent step after the techno-economic analysis is completed (e.g. in the residential and service sectors). The book includes the following chapters: scenarios and macroeconomic assumptions; methodological issues analyzing mitigation options; the integrated global energy model POLES and its projections for the reference and 2 deg C scenarios; forest and basic materials sector; residential sector in Europe; the service (tertiary) and the primary sectors in Europe; basic products and other manufacturing industry sectors; transport sectors in Europe; renewable sector in Europe; conversion sector in Europe; syntheses and sectoral analysis in Europe; macroeconomic impacts of climate policy in the EU; the effects of the financial crisis on baseline simulations with implications for climate policy modeling: an analysis using the global model E3MG 2008-2012; conclusions and policy recommendations.

The smartphone addiction scale: development and validation of a short version for adolescents.

Directory of Open Access Journals (Sweden)

Min Kwon

Full Text Available OBJECTIVE: This study was designed to investigate the revised and short version of the smartphone addiction scale and the proof of its validity in adolescents. In addition, it suggested cutting off the values by gender in order to determine smartphone addiction and elaborate the characteristics of smartphone usage in adolescents. METHOD: A set of questionnaires were provided to a total of 540 selected participants from April to May of 2013. The participants consisted of 343 boys and 197 girls, and their average age was 14.5 years old. The content validity was performed on a selection of shortened items, while an internal-consistency test was conducted for the verification of its reliability. The concurrent validity was confirmed using SAS, SAPS and KS-scale. Receiver operating characteristics analysis was conducted to suggest cut-off. RESULTS: The 10 final questions were selected using content validity. The internal consistency and concurrent validity of SAS were verified with a Cronbach's alpha of 0.911. The SAS-SV was significantly correlated with the SAS, SAPS and KS-scale. The SAS-SV scores of gender (p<.001 and self-evaluation of smartphone addiction (p<.001 showed significant difference. The ROC analysis results showed an area under a curve (AUC value of 0.963(0.888-1.000, a cut-off value of 31, sensitivity value of 0.867 and specificity value of 0.893 in boys while an AUC value of 0.947(0.887-1.000, a cut-off value of 33, sensitivity value of 0.875, and a specificity value of 0.886 in girls. CONCLUSIONS: The SAS-SV showed good reliability and validity for the assessment of smartphone addiction. The smartphone addiction scale short version, which was developed and validated in this study, could be used efficiently for the evaluation of smartphone addiction in community and research areas.

Statistical validation of normal tissue complication probability models

NARCIS (Netherlands)

Xu, Cheng-Jian; van der Schaaf, Arjen; van t Veld, Aart; Langendijk, Johannes A.; Schilstra, Cornelis

2012-01-01

PURPOSE: To investigate the applicability and value of double cross-validation and permutation tests as established statistical approaches in the validation of normal tissue complication probability (NTCP) models. METHODS AND MATERIALS: A penalized regression method, LASSO (least absolute shrinkage

The Air Warrior's Value of National Security Space

National Research Council Canada - National Science Library

Loftis, J

2003-01-01

...) approach was used to elicit values from air combat experts with operational experience. An initial Gold Standard value model was constructed and validated by air combat experts with recent experience in joint air operations...

tracing uganda's global primary organic pineapple value chain

African Journals Online (AJOL)

ACSS

2016-02-22

Feb 22, 2016 ... methods were used to validate results obtained from the .... TABLE 2. Agronomic information on organic pineapple production in Uganda ..... management, which makes the value chain expensive ..... A handbook for value ...

The development of a self-administered dementia checklist: the examination of concurrent validity and discriminant validity.

Science.gov (United States)

Miyamae, Fumiko; Ura, Chiaki; Sakuma, Naoko; Niikawa, Hirotoshi; Inagaki, Hiroki; Ijuin, Mutsuo; Okamura, Tsuyoshi; Sugiyama, Mika; Awata, Shuichi

2016-01-01

The present study aims to develop a self-administered dementia checklist to enable community-residing older adults to realize their declining functions and start using necessary services. A previous study confirmed the factorial validity and internal reliability of the checklist. The present study examined its concurrent validity and discriminant validity. The authors conducted a 3-step study (a self-administered survey including the checklist, interviews by nurses, and interviews by doctors and psychologists) of 7,682 community-residing individuals who were over 65 years of age. The authors calculated Spearman's correlation coefficients between the scores of the checklist and the results of a psychological test to examine the concurrent validity. They also compared the average total scores of the checklist between groups with different Clinical Dementia Rating (CDR) scores to examine discriminant validity and conducted a receiver operating characteristic analysis to examine the discriminative power for dementia. The authors analyzed the data of 131 respondents who completed all 3 steps. The checklist scores were significantly correlated with the respondents' Mini-Mental State Examination and Frontal Assessment Battery scores. The checklist also significantly discriminated the patients with dementia (CDR = 1+) from those without dementia (CDR = 0 or 0.5). The optimal cut-off point for the two groups was 17/18 (sensitivity, 72.0%; specificity, 69.2%; positive predictive value, 69.2%; negative predictive value, 72.0%). This study confirmed the concurrent validity and discriminant validity of the self-administered dementia checklist. However, due to its insufficient discriminative power as a screening tool for older people with declining cognitive functions, the checklist is only recommended as an educational and public awareness tool.

Backtesting Value-at-Risk

DEFF Research Database (Denmark)

Pajhede, Thor

2017-01-01

Testing the validity of value-at-risk (VaR) forecasts, or backtesting, is an integral part of modern market risk management and regulation. This is often done by applying independence and coverage tests developed by Christoffersen (International Economic Review, 1998; 39(4), 841–862) to so...

School Values Across Three Cultures

Directory of Open Access Journals (Sweden)

Ella Daniel

2013-04-01

Full Text Available A new typology of school-level values is reported in three cultural contexts. School values were assessed by aggregating the scores of 862 students, (ages 15-19 in 32 Jewish and Arab Israeli schools (Study 1, and 1,541 students (ages 11-21 from 8 European schools and 163 teachers from 6 of these schools (Study 2, using Schwartz’s Portrait Values Questionnaire. Six school values emerged in both studies: achievement, autonomy, egalitarianism, harmony, compliance, and dominance. The importance of studying school-level values was demonstrated by relating the values of compliance and dominance to violence, and harmony values to student support measures (Study 1. Strong (minimal r = .64 school-level correlations between students of different ages and teachers supported the validity of the findings (Study 2.

Validation of models with multivariate output

International Nuclear Information System (INIS)

Rebba, Ramesh; Mahadevan, Sankaran

2006-01-01

This paper develops metrics for validating computational models with experimental data, considering uncertainties in both. A computational model may generate multiple response quantities and the validation experiment might yield corresponding measured values. Alternatively, a single response quantity may be predicted and observed at different spatial and temporal points. Model validation in such cases involves comparison of multiple correlated quantities. Multiple univariate comparisons may give conflicting inferences. Therefore, aggregate validation metrics are developed in this paper. Both classical and Bayesian hypothesis testing are investigated for this purpose, using multivariate analysis. Since, commonly used statistical significance tests are based on normality assumptions, appropriate transformations are investigated in the case of non-normal data. The methodology is implemented to validate an empirical model for energy dissipation in lap joints under dynamic loading

Validation of New Cancer Biomarkers

DEFF Research Database (Denmark)

Duffy, Michael J; Sturgeon, Catherine M; Söletormos, Georg

2015-01-01

BACKGROUND: Biomarkers are playing increasingly important roles in the detection and management of patients with cancer. Despite an enormous number of publications on cancer biomarkers, few of these biomarkers are in widespread clinical use. CONTENT: In this review, we discuss the key steps...... in advancing a newly discovered cancer candidate biomarker from pilot studies to clinical application. Four main steps are necessary for a biomarker to reach the clinic: analytical validation of the biomarker assay, clinical validation of the biomarker test, demonstration of clinical value from performance...... of the biomarker test, and regulatory approval. In addition to these 4 steps, all biomarker studies should be reported in a detailed and transparent manner, using previously published checklists and guidelines. Finally, all biomarker studies relating to demonstration of clinical value should be registered before...

The triad value function

DEFF Research Database (Denmark)

Vedel, Mette

2016-01-01

the triad value function. Next, the applicability and validity of the concept is examined in a case study of four closed vertical supply chain triads. Findings - The case study demonstrates that the triad value function facilitates the analysis and understanding of an apparent paradox; that distributors...... are not dis-intermediated in spite of their limited contribution to activities in the triads. The results indicate practical adequacy of the triad value function. Research limitations/implications - The triad value function is difficult to apply in the study of expanded networks as the number of connections...... expands exponentially with the number of ties in the network. Moreover, it must be applied in the study of service triads and open vertical supply chain triads to further verify the practical adequacy of the concept. Practical implications - The triad value function cannot be used normatively...

Development and validation of the Japanese version of the Decisional Conflict Scale to investigate the value of pharmacists' information: a before and after study.

Science.gov (United States)

Kawaguchi, Takashi; Azuma, Kanako; Yamaguchi, Takuhiro; Soeda, Hiroshi; Sekine, Yusuke; Koinuma, Masayoshi; Takeuchi, Hironori; Akashi, Takao; Unezaki, Sakae

2013-04-17

The information provided in patient-centered care and shared decision-making influences patients' concerns and adherence to treatment. In the decision-making process, patients experience decisional conflict. The Decisional Conflict Scale (DCS) is a 16-item, self-administered questionnaire consisting of 5 subscales developed to assess patients' decisional conflict. This study aimed to develop the Japanese version of the DCS and to clarify the influence of the information provided by pharmacists' on decisional conflict among patients with cancer. We developed the Japanese version of the DCS by using the forward-backward translation method. One hundred patients who were recommended a new chemotherapy regimen were recruited. The psychometric properties of the Japanese DCS, including internal consistency, convergent validity, discriminant validity, and construct validity, were examined. We assessed the decisional conflict of patients before and after the pharmacists' provision of information. Ninety-four patients, predominately female, with an average age of 58.1 years were sampled. The scores on the 5 subscales of the DCS showed high internal consistency (Cronbach's alpha = 0.84-0.96). Multi-trait scaling analysis and cluster analysis showed strong validity. The mean total DCS score decreased significantly from 40.2 to 31.7 after patients received information from the pharmacists (p informed, values clarity, support, and effective decision, also significantly improved (p information was able to decrease decisional conflict among patients with cancer who were recommended a new chemotherapy regimen.

Nursing values and a changing nurse workforce: values, age, and job stages.

Science.gov (United States)

McNeese-Smith, Donna K; Crook, Mary

2003-05-01

To identify the extent values are associated with age group and job stage; job satisfaction, productivity, and organizational commitment; as well as education, generation, ethnicity, gender, and role. Values direct the priorities we live by and are related to employee loyalty and commitment. Lack of congruency between a nurse's personal values and those of the organization decrease satisfaction and effectiveness and may lead to burnout and turnover. Little research has been done on whether values differ by age, generations, or job stages. Nurses in all roles (N = 412) in three hospitals in Los Angeles County were randomly surveyed, using valid and reliable instruments to measure the variables of interest. Nurses in the top third for job satisfaction, organizational commitment, and productivity showed higher scores for many values including their associates, creativity, esthetics, and management, while those in the bottom third scored higher in economic returns only. Nurses in different generations differed little; younger generations placed higher values on economic returns and variety. Management strategies to meet nurses' values and increase their satisfaction and retention are presented.

An instrument to assess subjective task value beliefs regarding the decision to pursue postgraduate training.

Science.gov (United States)

Hagemeier, Nicholas E; Murawski, Matthew M

2014-02-12

To develop and validate an instrument to assess subjective ratings of the perceived value of various postgraduate training paths followed using expectancy-value as a theoretical framework; and to explore differences in value beliefs across type of postgraduate training pursued and type of pharmacy training completed prior to postgraduate training. A survey instrument was developed to sample 4 theoretical domains of subjective task value: intrinsic value, attainment value, utility value, and perceived cost. Retrospective self-report methodology was employed to examine respondents' (N=1,148) subjective task value beliefs specific to their highest level of postgraduate training completed. Exploratory and confirmatory factor analytic techniques were used to evaluate and validate value belief constructs. Intrinsic, attainment, utility, cost, and financial value constructs resulted from exploratory factor analysis. Cross-validation resulted in a 26-item instrument that demonstrated good model fit. Differences in value beliefs were noted across type of postgraduate training pursued and pharmacy training characteristics. The Postgraduate Training Value Instrument demonstrated evidence of reliability and construct validity. The survey instrument can be used to assess value beliefs regarding multiple postgraduate training options in pharmacy and potentially inform targeted recruiting of individuals to those paths best matching their own value beliefs.

The value of electricity distribution networks

International Nuclear Information System (INIS)

De Paoli, L.

2000-01-01

This article presents the results of a study aimed at evaluating parts of the distribution network of ENEL, in charge of distributing and supplying electricity to its captive market, that could be sold as a separate entity. To determine the asset value of these hypothetical companies, the discounted cash flow method has been used applied to the 147 ENEL's distributing zones. The econometric analysis shows that the relevant variables are the quantity sold to non residential and non big industrial consumers and the length of medium voltage lines. According to the available data and to the methodology chosen, the per client value of the distribution zones of ENEL varies substantially. The maximum value is bout three times the mean value and the minimum value is largely negative. The article maintains that changes in regulation could greatly modify the asset value of distribution networks. The main regulatory risks are linked to the degree of market opening, the introduction of compensation mechanisms between different distributors and the allowed maximum revenue fixed by energy Authority for a given period of time. This point is developed in the appendix where it is shown that the price cap method is decided on the basis of a rate of return which is valid at the moment of the cap fixing but that could be no longer valid if the rate of inflation varies [it

A systematic review of the reliability and validity of discrete choice experiments in valuing non-market environmental goods

DEFF Research Database (Denmark)

Rokotonarivo, Sarobidy; Schaafsma, Marije; Hockley, Neal

2016-01-01

reliability measures. DCE results were generally consistent with those of other stated preference techniques (convergent validity), but hypothetical bias was common. Evidence supporting theoretical validity (consistency with assumptions of rational choice theory) was limited. In content validity tests, 2...

The Math–Biology Values Instrument: Development of a Tool to Measure Life Science Majors’ Task Values of Using Math in the Context of Biology

Science.gov (United States)

Andrews, Sarah E.; Runyon, Christopher; Aikens, Melissa L.

2017-01-01

In response to calls to improve the quantitative training of undergraduate biology students, there have been increased efforts to better integrate math into biology curricula. One challenge of such efforts is negative student attitudes toward math, which are thought to be particularly prevalent among biology students. According to theory, students’ personal values toward using math in a biological context will influence their achievement and behavioral outcomes, but a validated instrument is needed to determine this empirically. We developed the Math–Biology Values Instrument (MBVI), an 11-item college-level self-­report instrument grounded in expectancy-value theory, to measure life science students’ interest in using math to understand biology, the perceived usefulness of math to their life science career, and the cost of using math in biology courses. We used a process that integrates multiple forms of validity evidence to show that scores from the MBVI can be used as a valid measure of a student’s value of math in the context of biology. The MBVI can be used by instructors and researchers to help identify instructional strategies that influence math–biology values and understand how math–biology values are related to students’ achievement and decisions to pursue more advanced quantitative-based courses. PMID:28747355

Bioclim Deliverable D3: global climatic features over the next million years and recommendation for specific situations to be considered

International Nuclear Information System (INIS)

2001-01-01

The BIOCLIM project aims at assessing the possible long-term impacts of climate change on the safety of waste repositories in deep formations using climate simulations of the long-term climate in various European areas. One of the objectives of the project is to develop two strategies for representing sequential climatic changes to the geosphere-biosphere system for different sites over Europe, addressing the time scale of one million years. The results of this work will be interpreted in terms of global or regional changes of climate and of vegetation. The first strategy (hierarchical strategy) will use the full hierarchy of existing climate models (a climate model is a numerical simplified representation of the climate system behaviour and evolution). Simple models (LLN 2-D NH and threshold models; see the description here after) will simulate the overall long-term evolution of the global climate. Their results will then be used as inputs to more complex models (LMD climate models possibly coupled with vegetation models, either SECHIBA or ORCHIDE) and finally climate and vegetation cover will be determined for specific sites at specific times. A second strategy (integrated strategy) will consist in building an integrated climate model, which represents most of the physical mechanisms for studying long-term climatic variations. The results will then be interpreted on a regional scale. This deliverable is the first step of the hierarchical strategy. The purpose of this deliverable is to identify and justify some specific climatic situations amongst different long-term simulations that are of interest for assessing the safety of radioactive waste repository sites and that will be further studied with GCMs (General Circulation Model). The simple threshold (or multi-state) climate model is a modified version of the model from Paillard. It describes the time evolution of the ice volume and the CO 2 concentration. It has two distinct regimes (interglacial and glacial

Development and Preliminary Validation of a New Measure of Values in Scientific Work.

Science.gov (United States)

English, Tammy; Antes, Alison L; Baldwin, Kari A; DuBois, James M

2018-04-01

In this paper we describe the development and initial psychometric evaluation of a new measure, the values in scientific work (VSW). This scale assesses the level of importance that investigators attach to different VSW. It taps a broad range of intrinsic, extrinsic, and social values that motivate the work of scientists, including values specific to scientific work (e.g., truth and integrity) and more classic work values (e.g., security and prestige) in the context of science. Notably, the values represented in this scale are relevant to scientists regardless of their career stage and research focus. We administered the VSW and a measure of global values to 203 NIH-funded investigators. Exploratory factor analyses suggest the delineation of eight VSW, including autonomy, research ethics, social impact, income, collaboration, innovation and growth, conserving relationships, and job security. These VSW showed predictable and distinct associations with global values. Implications of these findings for work on research integrity and scientific misconduct are discussed.

Validation and Application of the Survey of Teaching Beliefs and Practices for Undergraduates (STEP-U): Identifying Factors Associated with Valuing Important Workplace Skills among Biology Students

Science.gov (United States)

Marbach-Ad, Gili; Rietschel, Carly; Thompson, Katerina V.

2016-01-01

We present a novel assessment tool for measuring biology students’ values and experiences across their undergraduate degree program. Our Survey of Teaching Beliefs and Practices for Undergraduates (STEP-U) assesses the extent to which students value skills needed for the workplace (e.g., ability to work in groups) and their experiences with teaching practices purported to promote such skills (e.g., group work). The survey was validated through factor analyses in a large sample of biology seniors (n = 1389) and through response process analyses (five interviewees). The STEP-U skills items were characterized by two underlying factors: retention (e.g., memorization) and transfer (e.g., knowledge application). Multiple linear regression models were used to examine relationships between classroom experiences, values, and student characteristics (e.g., gender, cumulative grade point average [GPA], and research experience). Student demographic and experiential factors predicted the extent to which students valued particular skills. Students with lower GPAs valued retention skills more than those with higher GPAs. Students with research experience placed greater value on scientific writing and interdisciplinary understanding. Greater experience with specific teaching practices was associated with valuing the corresponding skills more highly. The STEP-U can provide feedback vital for designing curricula that better prepare students for their intended postgraduate careers. PMID:27856547

Deliverable D4.2. Report on Standards and Regulations Compliance

OpenAIRE

Duzha, Armend; Polemi, Nineta; Gouvas, Panagiotis; Karantjias, Athanasis; Papastergious, Spyros; Patsakis, Constantinos; Douligeris, Christios; Glykos, Stamatios; Exarchou, Georgios

2016-01-01

Despite the importance of Critical Information Infrastructures (CIIs) and dynamic ICT-based maritime supply chains (SCs) for port operations, state-of-the-art Risk Management (RM) methodologies for maritime environments pay limited attention to cyber-security and do not adequately address security processes for international SCs. Motivated by these limitations, MITIGATE will introduce, integrate, validate and commercialize a novel RM system, which will empower stakeholders’ collaboration for ...

Report on Stakeholder Evaluation of Aquatic Resources. Deliverable 5.2

DEFF Research Database (Denmark)

Nguyen, Thi Dieu Phuong; Lund, Søren; Banta, Gary Thomas

The present report on stakeholder evaluation of highland aquatic resources provides an overview of completed research activities undertaken within the HighARCS project on the value ascribed by users, local communities and stakeholders to functions, goods and services (including non-use values......) derived from the aquatic resources in the Northern and Central of Vietnam. The perceived impact of factors such as environmental degradation, changing demand for goods and services and modified highland aquatic resources management practices on these values has also been assessed....

A systematic review of the reliability and validity of discrete choice experiments in valuing non-market environmental goods.

Science.gov (United States)

Rakotonarivo, O Sarobidy; Schaafsma, Marije; Hockley, Neal

2016-12-01

While discrete choice experiments (DCEs) are increasingly used in the field of environmental valuation, they remain controversial because of their hypothetical nature and the contested reliability and validity of their results. We systematically reviewed evidence on the validity and reliability of environmental DCEs from the past thirteen years (Jan 2003-February 2016). 107 articles met our inclusion criteria. These studies provide limited and mixed evidence of the reliability and validity of DCE. Valuation results were susceptible to small changes in survey design in 45% of outcomes reporting reliability measures. DCE results were generally consistent with those of other stated preference techniques (convergent validity), but hypothetical bias was common. Evidence supporting theoretical validity (consistency with assumptions of rational choice theory) was limited. In content validity tests, 2-90% of respondents protested against a feature of the survey, and a considerable proportion found DCEs to be incomprehensible or inconsequential (17-40% and 10-62% respectively). DCE remains useful for non-market valuation, but its results should be used with caution. Given the sparse and inconclusive evidence base, we recommend that tests of reliability and validity are more routinely integrated into DCE studies and suggest how this might be achieved. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Measurement invariance of the Portrait Values Questionnaire across 25 European countries

DEFF Research Database (Denmark)

Scholderer, Joachim

The Portrait Values Questionnaire (PVQ) is tested for cross-cultural validity. Measurement characteristics are compared across representative consumer samples from 25 European countries (total N = 37,592) using multi-group confirmatory factor analysis with structured means. The results suggest....... Hence, most direct comparisons of PVQ raw scores and sample statistics between European countries are valid without correction. Furthermore, it can be concluded that the ten values measured by the PVQ are invariant across European countries in terms of their relative position on the quasi......-circumplex hypothesised by the theory of basic human values....

Validity of Management Control Topoi

DEFF Research Database (Denmark)

Nørreklit, Lennart; Nørreklit, Hanne; Israelsen, Poul

2004-01-01

The validity of research and company topoi for constructing/analyzing relaity is analyzed as the integration of the four aspects (dimensions): fact, possibility (logic), value and comunication. Main stream, agency theory and social constructivism are critizied for reductivism (incomplete integrat...

Attempt to validate breakpoint MIC values estimated from pharmacokinetic data obtained during oxolinic acid therapy of winter ulcer disease in Atlantic salmon ( Salmo salar )

DEFF Research Database (Denmark)

Coyne, R.; Bergh, Ø.; Samuelsen, O.

2004-01-01

Concentrations of oxolinic acid (OXA) were measured in the plasma, muscle, liver, and kidney of 48 Atlantic salmons (Salmo salar) 1 day after the end of an oral administration. OXA was administered over a period of 13 days to control an outbreak of winter ulcer disease in a commercial marine farm...... administration of OXA. A numerical description of the concentration of the antimicrobial agent achieved in therapy is necessary to determine the resistance or sensitivity of the bacteria involved in the infection. The degree of fish-to-fish variation in the concentrations of OXA, both within the healthy fish...... a useful parameter for describing the concentrations of agents achieved during therapy. The plasma data from this investigation were used to estimate clinically relevant breakpoint minimum inhibitory concentration (MIC) values. The validity of these breakpoint values was discussed with reference...

Modified Cut-Off Value of the Urine Protein-To-Creatinine Ratio Is Helpful for Identifying Patients at High Risk for Chronic Kidney Disease: Validation of the Revised Japanese Guideline.

Science.gov (United States)

Yamamoto, Hiroyuki; Yamamoto, Kyoko; Yoshida, Katsumi; Shindoh, Chiyohiko; Takeda, Kyoko; Monden, Masami; Izumo, Hiroko; Niinuma, Hiroyuki; Nishi, Yutaro; Niwa, Koichiro; Komatsu, Yasuhiro

2015-11-01

Chronic kidney disease (CKD) is a global public health issue, and strategies for its early detection and intervention are imperative. The latest Japanese CKD guideline recommends that patients without diabetes should be classified using the urine protein-to-creatinine ratio (PCR) instead of the urine albumin-to-creatinine ratio (ACR); however, no validation studies are available. This study aimed to validate the PCR-based CKD risk classification compared with the ACR-based classification and to explore more accurate classification methods. We analyzed two previously reported datasets that included diabetic and/or cardiovascular patients who were classified into early CKD stages. In total, 860 patients (131 diabetic patients and 729 cardiovascular patients, including 193 diabetic patients) were enrolled. We assessed the CKD risk classification of each patient according to the estimated glomerular filtration rate and the ACR-based or PCR-based classification. The use of the cut-off value recommended in the current guideline (PCR 0.15 g/g creatinine) resulted in risk misclassification rates of 26.0% and 16.6% for the two datasets. The misclassification was primarily caused by underestimation. Moderate to substantial agreement between each classification was achieved: Cohen's kappa, 0.56 (95% confidence interval, 0.45-0.69) and 0.72 (0.67-0.76) in each dataset, respectively. To improve the accuracy, we tested various candidate PCR cut-off values, showing that a PCR cut-off value of 0.08-0.10 g/g creatinine resulted in improvement in the misclassification rates and kappa values. Modification of the PCR cut-off value would improve its efficacy to identify high-risk populations who will benefit from early intervention.

Materials and process engineering projects for the Sandia National Laboratories/Newly Independent States Industrial Partnering Program. Volume 1

Energy Technology Data Exchange (ETDEWEB)

Zanner, F.J.; Moffatt, W.C.

1995-07-01

In July, 1994, a team of materials specialists from Sandia and U S Industry traveled to Russia and the Ukraine to select and fund projects in materials and process technology in support of the Newly Independent States/Industrial Partnering Program (NIS/IPP). All of the projects are collaborations with scientists and Engineers at NIS Institutes. Each project is scheduled to last one year, and the deliverables are formatted to supply US Industry with information which will enable rational decisions to be made regarding the commercial value of these technologies. This work is an unedited interim compilation of the deliverables received to date.

Materials and process engineering projects for the Sandia National Laboratories/Newly Independent States Industrial Partnering Program. Volume 2

International Nuclear Information System (INIS)

Zanner, F.J.; Moffatt, W.C.

1995-07-01

In July, 1994, a team of materials specialists from Sandia and US. Industry traveled to Russia and the Ukraine to select and fund projects in materials and process technology in support of the Newly Independent States/Industrial Partnering Program (NIS/IPP). All of the projects are collaborations with scientists and Engineers at NIS Institutes. Each project is scheduled to last one year, and the deliverables are formatted to supply US. Industry with information which will enable rational decisions to be made regarding the commercial value of these technologies. This work is an unedited interim compilation of the deliverables received to date

Materials and process engineering projects for the Sandia National Laboratories/Newly Independent States Industrial Partnering Program. Volume 2

Energy Technology Data Exchange (ETDEWEB)

Zanner, F.J.; Moffatt, W.C.

1995-07-01

In July, 1994, a team of materials specialists from Sandia and US. Industry traveled to Russia and the Ukraine to select and fund projects in materials and process technology in support of the Newly Independent States/Industrial Partnering Program (NIS/IPP). All of the projects are collaborations with scientists and Engineers at NIS Institutes. Each project is scheduled to last one year, and the deliverables are formatted to supply US. Industry with information which will enable rational decisions to be made regarding the commercial value of these technologies. This work is an unedited interim compilation of the deliverables received to date.

Validation of Serious Games

Directory of Open Access Journals (Sweden)

Katinka van der Kooij

2015-09-01

Full Text Available The application of games for behavioral change has seen a surge in popularity but evidence on the efficacy of these games is contradictory. Anecdotal findings seem to confirm their motivational value whereas most quantitative findings from randomized controlled trials (RCT are negative or difficult to interpret. One cause for the contradictory evidence could be that the standard RCT validation methods are not sensitive to serious games’ effects. To be able to adapt validation methods to the properties of serious games we need a framework that can connect properties of serious game design to the factors that influence the quality of quantitative research outcomes. The Persuasive Game Design model [1] is particularly suitable for this aim as it encompasses the full circle from game design to behavioral change effects on the user. We therefore use this model to connect game design features, such as the gamification method and the intended transfer effect, to factors that determine the conclusion validity of an RCT. In this paper we will apply this model to develop guidelines for setting up validation methods for serious games. This way, we offer game designers and researchers handles on how to develop tailor-made validation methods.

Suggested Guidelines for Transparency and Participation in Nuclear Waste Management Programmes. Deliverable 22

International Nuclear Information System (INIS)

Jonsson, Josefin Paeivioe; Andersson, Kjell; Bolado, Ricardo; Drottz Sjoeberg, Britt-Marie; Elam, Mark; Sundqvist, Goeran; Kojo, Matti; Meskens, Gaston; Pritrsky, Jozef; Richardson, Phil; Soneryd, Linda; Steinerova, Lucie; Szerszynski, Bronislaw; Wene, Clas-Otto; Vojtechova, Hana

2010-02-01

. Annex 2 gives references for the various sections of the guidelines to more background information in ARGONA deliverables and in the ARGONA Final Report. These guidelines concern nuclear waste management, however, this issue represents only one part of society's concerns in complex and controversial matters. The ARGONA participants believe that many of the following suggested guidelines should be of relevance in a much wider context than nuclear waste management only

Analyzing the determinants of willingness-to-pay values for testing the validity of the contingent valuation method. Application to home care compared to hospital care

OpenAIRE

Marie-Odile Carrère; Nathalie Havet; Magali Morelle; Raphaël Remonnay

2008-01-01

Working paper GATE 08-20; The contingent valuation (CV) method is an attractive approach for comparing home care to hospital care in which the only difference is patients' well-being during the treatment process and not health outcomes. We considered the empirical situation of blood transfusion (BT) in cancer patients and collected willingness to pay (WTP) values among BT users. Our main objective was to test the validity of the CV method, namely its ability to elicit true preferences. Firstl...

Protective aprons in imaging departments: manufacturer stated lead equivalence values require validation

International Nuclear Information System (INIS)

Finnerty, M.; Brennan, P.C.

2005-01-01

The composition of protective aprons worn by X-ray personnel to shield against secondary radiation is changing. Lead is being replaced by either lead-free or composite (lead with other high atomic numbered elements) materials. These newer aprons are categorised by manufacturers in terms of lead equivalent values, but it is unclear how these stated values compare with actual lead equivalent values. In this work, the actual lead equivalence of 41 protective aprons from four manufacturers, all specified as having 0.25 mm lead equivalence, were investigated with transmission experiments at 70 and 100 kVp. All aprons were in current use. The aprons were screened for defects, and age, weight and design was recorded along with details of associated quality assurance (QA). Out of the 41 protective aprons examined for actual lead equivalence, 73% were outside tolerance levels, with actual levels in some aprons demonstrating less than half of the nominal values. The lack of compatibility between actual and nominal lead equivalent values was demonstrated by aprons from three of the four manufacturers investigated. The area of the defects found on screening of the protective aprons were within recommendations. The results highlight the need for acceptancy and ongoing checks of protective aprons to ensure that radiation exposure of imaging personnel is kept to a minimum. (orig.)

Texture analysis on the fluence map to evaluate the degree of modulation for volumetric modulated arc therapy

International Nuclear Information System (INIS)

Park, So-Yeon; Kim, Il Han; Ye, Sung-Joon; Carlson, Joel

2014-01-01

Purpose: Texture analysis on fluence maps was performed to evaluate the degree of modulation for volumetric modulated arc therapy (VMAT) plans. Methods: A total of six textural features including angular second moment, inverse difference moment, contrast, variance, correlation, and entropy were calculated for fluence maps generated from 20 prostate and 20 head and neck VMAT plans. For each of the textural features, particular displacement distances (d) of 1, 5, and 10 were adopted. To investigate the deliverability of each VMAT plan, gamma passing rates of pretreatment quality assurance, and differences in modulating parameters such as multileaf collimator (MLC) positions, gantry angles, and monitor units at each control point between VMAT plans and dynamic log files registered by the Linac control system during delivery were acquired. Furthermore, differences between the original VMAT plan and the plan reconstructed from the dynamic log files were also investigated. To test the performance of the textural features as indicators for the modulation degree of VMAT plans, Spearman’s rank correlation coefficients (r s ) with the plan deliverability were calculated. For comparison purposes, conventional modulation indices for VMAT including the modulation complexity score for VMAT, leaf travel modulation complexity score, and modulation index supporting station parameter optimized radiation therapy (MI SPORT ) were calculated, and their correlations were analyzed in the same way. Results: There was no particular textural feature which always showed superior correlations with every type of plan deliverability. Considering the results comprehensively, contrast (d = 1) and variance (d = 1) generally showed considerable correlations with every type of plan deliverability. These textural features always showed higher correlations to the plan deliverability than did the conventional modulation indices, except in the case of modulating parameter differences. The r s values

Final Report on Pilot Studies / Final Report on Classroom Research with STEM and TESL Assessment

DEFF Research Database (Denmark)

Biel, Carmen; Wake, Jo Dugstad; Hesse, Friedrich

This Deliverable is the final report on pilot studies within the NEXT-TELL project (D6.7) and furthermore comprises the Deliverable on Classroom Research with STEM and TESL Assessment (D2.9) in order to avoid redundancies between those two Deliverables.......This Deliverable is the final report on pilot studies within the NEXT-TELL project (D6.7) and furthermore comprises the Deliverable on Classroom Research with STEM and TESL Assessment (D2.9) in order to avoid redundancies between those two Deliverables....

The Politics and Statistics of Value-Added Modeling for Accountability of Teacher Preparation Programs

Science.gov (United States)

Lincove, Jane Arnold; Osborne, Cynthia; Dillon, Amanda; Mills, Nicholas

2014-01-01

Despite questions about validity and reliability, the use of value-added estimation methods has moved beyond academic research into state accountability systems for teachers, schools, and teacher preparation programs (TPPs). Prior studies of value-added measurement for TPPs test the validity of researcher-designed models and find that measuring…

Value orientations and environmental beliefs in five countries - Validity of an instrument to measure egoistic, altruistic and biospheric value orientations

NARCIS (Netherlands)

de Groot, Judith I. M.; Steg, Linda

Various scholars argue that egoistic, altruistic, and biospheric value orientations are important for understanding environmental beliefs and behavior. However, little empirical evidence has been provided for the distinction between altruistic and biospheric values. This study examines whether this

Model Validation Using Coordinate Distance with Performance Sensitivity

Directory of Open Access Journals (Sweden)

Jiann-Shiun Lew

2008-01-01

Full Text Available This paper presents an innovative approach to model validation for a structure with significant parameter variations. Model uncertainty of the structural dynamics is quantified with the use of a singular value decomposition technique to extract the principal components of parameter change, and an interval model is generated to represent the system with parameter uncertainty. The coordinate vector, corresponding to the identified principal directions, of the validation system is computed. The coordinate distance between the validation system and the identified interval model is used as a metric for model validation. A beam structure with an attached subsystem, which has significant parameter uncertainty, is used to demonstrate the proposed approach.

Statistical validation of normal tissue complication probability models.

Science.gov (United States)

Xu, Cheng-Jian; van der Schaaf, Arjen; Van't Veld, Aart A; Langendijk, Johannes A; Schilstra, Cornelis

2012-09-01

To investigate the applicability and value of double cross-validation and permutation tests as established statistical approaches in the validation of normal tissue complication probability (NTCP) models. A penalized regression method, LASSO (least absolute shrinkage and selection operator), was used to build NTCP models for xerostomia after radiation therapy treatment of head-and-neck cancer. Model assessment was based on the likelihood function and the area under the receiver operating characteristic curve. Repeated double cross-validation showed the uncertainty and instability of the NTCP models and indicated that the statistical significance of model performance can be obtained by permutation testing. Repeated double cross-validation and permutation tests are recommended to validate NTCP models before clinical use. Copyright © 2012 Elsevier Inc. All rights reserved.

Statistical Validation of Normal Tissue Complication Probability Models

Energy Technology Data Exchange (ETDEWEB)

Xu Chengjian, E-mail: c.j.xu@umcg.nl [Department of Radiation Oncology, University of Groningen, University Medical Center Groningen, Groningen (Netherlands); Schaaf, Arjen van der; Veld, Aart A. van' t; Langendijk, Johannes A. [Department of Radiation Oncology, University of Groningen, University Medical Center Groningen, Groningen (Netherlands); Schilstra, Cornelis [Department of Radiation Oncology, University of Groningen, University Medical Center Groningen, Groningen (Netherlands); Radiotherapy Institute Friesland, Leeuwarden (Netherlands)

2012-09-01

Purpose: To investigate the applicability and value of double cross-validation and permutation tests as established statistical approaches in the validation of normal tissue complication probability (NTCP) models. Methods and Materials: A penalized regression method, LASSO (least absolute shrinkage and selection operator), was used to build NTCP models for xerostomia after radiation therapy treatment of head-and-neck cancer. Model assessment was based on the likelihood function and the area under the receiver operating characteristic curve. Results: Repeated double cross-validation showed the uncertainty and instability of the NTCP models and indicated that the statistical significance of model performance can be obtained by permutation testing. Conclusion: Repeated double cross-validation and permutation tests are recommended to validate NTCP models before clinical use.

Critical serum creatinine values in very preterm newborns.

Directory of Open Access Journals (Sweden)

Alexandra Bruel

Full Text Available BACKGROUND: Renal failure in neonates is associated with an increased risk of mortality and morbidity. But critical values are not known. OBJECTIVE: To define critical values for serum creatinine levels by gestational age in preterm infants, as a predictive factor for mortality and morbidity. STUDY DESIGN: This was a retrospective study of all preterm infants born before 33 weeks of gestational age, hospitalized in Nantes University Hospital NICU between 2003 and 2009, with serum creatinine levels measured between postnatal days 3 to 30. Children were retrospectively randomized into either training or validation set. Critical creatinine values were defined within the training set as the 90(th percentile values of highest serum creatinine (HSCr in infants with optimal neurodevelopmental at two years of age. The relationship between these critical creatinine values and neonatal mortality, and non-optimal neural development at two years, was then assessed in the validation set. RESULTS AND CONCLUSION: The analysis involved a total of 1,461 infants (gestational ages of 24-27 weeks (n=322, 28-29 weeks (n=336, and 30-32 weeks (803, and 14,721 creatinine assessments. The critical values determined in the training set (n=485 were 1.6, 1.1 and 1.0 mg/dL for each gestational age group, respectively. In the validation set (n=976, a serum creatinine level above the critical value was significantly associated with neonatal mortality (Odds ratio: 8.55 (95% confidence interval: 4.23-17.28; p<0.01 after adjusting for known renal failure risk factors, and with non-optimal neurodevelopmental outcome at two years (odds ratio: 2.06 (95% confidence interval: 1.26-3.36; p=0.004 before adjustment. Creatinine values greater than 1.6, 1.1 and 1.0 mg/dL respectively at 24-27, 28-29, 30-32 weeks of gestation were associated with mortality before and after adjustment for risk factors, and with non-optimal neurodevelopmental outcome, before adjustment.

Evaluation of Isotopic Measurements and Burn-up Value of Sample GU3 of ARIANE Project

Energy Technology Data Exchange (ETDEWEB)

Tore, C.; Rodriguez Rivada, A.

2014-07-01

Estimation of the burn-up value of irradiated fuel and its isotopic composition are important for criticality analysis, spent fuel management and source term estimation. The practical way to estimate the irradiated fuel composition and burn.up value is calculation with validated code and nuclear data. Such validation of the neutronic codes and nuclear data requires the benchmarking with measured values. (Author)

Player Monitoring in Indoor Team Sports: Concurrent Validity of Inertial Measurement Units to Quantify Average and Peak Acceleration Values

Directory of Open Access Journals (Sweden)

Mareike Roell

2018-02-01

Full Text Available The increasing interest in assessing physical demands in team sports has led to the development of multiple sports related monitoring systems. Due to technical limitations, these systems primarily could be applied to outdoor sports, whereas an equivalent indoor locomotion analysis is not established yet. Technological development of inertial measurement units (IMU broadens the possibilities for player monitoring and enables the quantification of locomotor movements in indoor environments. The aim of the current study was to validate an IMU measuring by determining average and peak human acceleration under indoor conditions in team sport specific movements. Data of a single wearable tracking device including an IMU (Optimeye S5, Catapult Sports, Melbourne, Australia were compared to the results of a 3D motion analysis (MA system (Vicon Motion Systems, Oxford, UK during selected standardized movement simulations in an indoor laboratory (n = 56. A low-pass filtering method for gravity correction (LF and two sensor fusion algorithms for orientation estimation [Complementary Filter (CF, Kalman-Filter (KF] were implemented and compared with MA system data. Significant differences (p < 0.05 were found between LF and MA data but not between sensor fusion algorithms and MA. Higher precision and lower relative errors were found for CF (RMSE = 0.05; CV = 2.6% and KF (RMSE = 0.15; CV = 3.8% both compared to the LF method (RMSE = 1.14; CV = 47.6% regarding the magnitude of the resulting vector and strongly emphasize the implementation of orientation estimation to accurately describe human acceleration. Comparing both sensor fusion algorithms, CF revealed slightly lower errors than KF and additionally provided valuable information about positive and negative acceleration values in all three movement planes with moderate to good validity (CV = 3.9 – 17.8%. Compared to x- and y-axis superior results were found for the z-axis. These findings demonstrate that

Capacity Development and Strengthening for Energy Policy formulation and implementation of Sustainable Energy Projects in Indonesia CASINDO. Deliverable No. 27. Biogas Construction Plan in Segoroyoso Village Yogyakarta Region

Energy Technology Data Exchange (ETDEWEB)

Lesmana, Surya Budi; Putra, Sri Atmaja [Muhammadiyah University of Yogyakarta, Yogyakarta (Indonesia)

2011-10-15

The overall objective of the CASINDO programme is to establish a self-sustaining and self-developing structure at both the national and regional level to build and strengthen human capacity to enable the provinces of North Sumatra, Yogyakarta, Central Java, West Nusa Tenggara (WNT) and Papua to formulate sound policies for renewable energy and energy efficiency and to develop and implement sustainable energy projects. To achieve the CASINDO objective seven Technical Working Groups have been established with the aim to conduct the technical activities under the various work packages and to produce the agreed deliverables. This report presents results from Technical Working Group IV on Renewable Energy project development. Its main aims were: To identify suitable non-hydro RE projects that can be developed in the province; To conduct an energy needs assessment in a selected location; To develop a business plan for a proposed solution to the identified main energy problem of the target community; To identify potential investors; To construct the project.

Wellhead deliverabilty of natural gas - assembling the evidence. Final report

International Nuclear Information System (INIS)

Hughes, W.R.

1995-09-01

This report presents information about the wellhead delivery of natural gas--the amount of gas the supply industry can produce and deliver to the pipeline. It is designed to help power industry planners evaluate essential aspects of gas supply as part of their overall assessment and utilization of gas-fired power generation. Low prices caused by excess deliverability have led to minimal exploration for new supplies, with the open-quotes bubbleclose quotes of excess deliverability ending. The report examines the facts pertinent to assessing the outlook for deliverability over the intermediate term. It develops deliverability concepts and relates deliverability to reserves and resources. It assesses the available information for measuring and monitoring availability and suggests improvements in available data. The regional outlook for deliverability growth in the Gulf of Mexico and other leading producing regions is also discussed. The report reviews the historical background of present deliverability trends and discusses the industry dynamics that affect development of future deliverability: lead times for increasing deliverability, the declining base of skilled exploration manpower, advancing gas supply technology, and prices required to encourage exploration and development

Measuring Value in Internal Medicine Residency Training Hospitals Using Publicly Reported Measures.

Science.gov (United States)

Schickedanz, Adam; Gupta, Reshma; Arora, Vineet M; Braddock, Clarence H

2018-03-01

Graduate medical education (GME) lacks measures of resident preparation for high-quality, cost-conscious practice. The authors used publicly reported teaching hospital value measures to compare internal medicine residency programs on high-value care training and to validate these measures against program director perceptions of value. Program-level value training scores were constructed using Centers for Medicare & Medicaid Services Value-Based Purchasing (VBP) Program hospital quality and cost-efficiency data. Correlations with Association of Program Directors in Internal Medicine Annual Survey high-value care training measures were examined using logistic regression. For every point increase in program-level VBP score, residency directors were more likely to agree that GME programs have a responsibility to contain health care costs (adjusted odds ratio [aOR] 1.18, P = .04), their faculty model high-value care (aOR 1.07, P = .03), and residents are prepared to make high-value medical decisions (aOR 1.07, P = .09). Publicly reported clinical data offer valid measures of GME value training.

SU-E-T-161: Characterization and Validation of CT Simulator Hounsfield Units to Relative Stopping Power Values for Proton Treatment Planning

International Nuclear Information System (INIS)

Schnell, E; Ahmad, S; De La Fuente Herman, T

2015-01-01

Purpose: To develop a calibration curve that includes and minimizes the variations of Hounsfield Unit (HU) from a CT scanner to Relative Stopping Power (RSP) of tissues along the proton beam path. The variations are due to scanner and proton energy, technique, phantom size and placement, and tissue arrangement. Methods: A CIRS 062 M phantom with 10 plugs of known relative electron density (RED) was scanned through a 16 slice GE Discovery CT Simulator scanner. Three setup combinations of plug distributions and techniques clinically implemented for five treatment regions were scanned with energies of 100, 120, and 140 kV. Volumetric HU values were measured for each plug and scan. The RSP values derived through the Bethe-Bloch formula are currently being verified with parallel-plate ionization chamber measurements in water using 80, 150, and 225 MeV proton beam. Typical treatment plans for treatment regions of brain, head-&-neck, chest, abdomen, and pelvis are being planned and dose delivered will be compared with film and Optically Stimulated Luminescence (OSL) measurements. Results: Percentage variations were determined for each variable. For tissues close to water, variations were <1% from any given parameter. Tissues far from water equivalence (lung and bone) showed the greatest sensitivity to change (7.4% maximum) with scanner energy and up to 5.3% with positioning of the phantom. No major variations were observed for proton energies within the treatment range. Conclusion: When deriving a calibration curve, attention should be placed to low and high HU values. A thorough verification process of calculated vs. water-phantom measured RSP values at different proton energies, followed by dose validation of planned vs. measured doses in phantom with film and OSL detectors are currently being undertaken

An Evaluation Framework for Lossy Compression of Genome Sequencing Quality Values

OpenAIRE

Alberti, Claudio; Daniels, Noah; Hernaez, Mikel; Voges, Jan; Goldfeder, Rachel L.; Hernandez-Lopez, Ana A.; Mattavelli, Marco; Berger, Bonnie

2016-01-01

This paper provides the specification and an initial validation of an evaluation framework for the comparison of lossy compressors of genome sequencing quality values. The goal is to define reference data, test sets, tools and metrics that shall be used to evaluate the impact of lossy compression of quality values on human genome variant calling. The functionality of the framework is validated referring to two state-of-the-art genomic compressors. This work has been spurred by the current act...

Measuring value sensitivity in medicine.

Science.gov (United States)

Ineichen, Christian; Christen, Markus; Tanner, Carmen

2017-01-28

Value sensitivity - the ability to recognize value-related issues when they arise in practice - is an indispensable competence for medical practitioners to enter decision-making processes related to ethical questions. However, the psychological competence of value sensitivity is seldom an explicit subject in the training of medical professionals. In this contribution, we outline the traditional concept of moral sensitivity in medicine and its revised form conceptualized as value sensitivity and we propose an instrument that measures value sensitivity. We developed an instrument for assessing the sensitivity for three value groups (moral-related values, values related to the principles of biomedical ethics, strategy-related values) in a four step procedure: 1) value identification (n = 317); 2) value representation (n = 317); 3) vignette construction and quality evaluation (n = 37); and 4) instrument validation by comparing nursing professionals with hospital managers (n = 48). We find that nursing professionals recognize and ascribe importance to principle-related issues more than professionals from hospital management. The latter are more likely to recognize and ascribe importance to strategy-related issues. These hypothesis-driven results demonstrate the discriminatory power of our newly developed instrument, which makes it useful not only for health care professionals in practice but for students and people working in the clinical context as well.

Validation of second trimester miscarriages and spontaneous deliveries

DEFF Research Database (Denmark)

Sundtoft, Iben Blaabjerg; Sneider, Kirstine; Christiansen, Ole Bjarne

2015-01-01

OBJECTIVE: To validate the diagnosis of second trimester miscarriages/deliveries (16+0 weeks to 27+6 weeks of gestation) recorded as miscarriages in the Danish National Patient Registry or spontaneous deliveries in the Danish Medical Birth Registry, and asses the validity of risk factors, pregnancy...... information and calculated positive predictive values of the registry diagnoses stratified by type of registry, as well as sensitivity, specificity, positive predictive value, and kappa coefficients of risk factors, pregnancy complications, and cerclage. RESULTS: Miscarriage/spontaneous delivery in the second......-based information on pregnancy complications need to be improved. We recommend that all pregnancies ending spontaneously beyond the first trimester are included in the national birth registry and described by appropriate variables....

Doubtful outcome of the validation of the Rome II questionnaire: validation of a symptom based diagnostic tool

Directory of Open Access Journals (Sweden)

Nylin Henry BO

2009-12-01

Full Text Available Abstract Background Questionnaires are used in research and clinical practice. For gastrointestinal complaints the Rome II questionnaire is internationally known but not validated. The aim of this study was to validate a printed and a computerized version of Rome II, translated into Swedish. Results from various analyses are reported. Methods Volunteers from a population based colonoscopy study were included (n = 1011, together with patients seeking general practice (n = 45 and patients visiting a gastrointestinal specialists' clinic (n = 67. The questionnaire consists of 38 questions concerning gastrointestinal symptoms and complaints. Diagnoses are made after a special code. Our validation included analyses of the translation, feasibility, predictability, reproducibility and reliability. Kappa values and overall agreement were measured. The factor structures were confirmed using a principal component analysis and Cronbach's alpha was used to test the internal consistency. Results and Discussion Translation and back translation showed good agreement. The questionnaire was easy to understand and use. The reproducibility test showed kappa values of 0.60 for GERS, 0.52 for FD, and 0.47 for IBS. Kappa values and overall agreement for the predictability when the diagnoses by the questionnaire were compared to the diagnoses by the clinician were 0.26 and 90% for GERS, 0.18 and 85% for FD, and 0.49 and 86% for IBS. Corresponding figures for the agreement between the printed and the digital version were 0.50 and 92% for GERS, 0.64 and 95% for FD, and 0.76 and 95% for IBS. Cronbach's alpha coefficient for GERS was 0.75 with a span per item of 0.71 to 0.76. For FD the figures were 0.68 and 0.54 to 0.70 and for IBS 0.61 and 0.56 to 0.66. The Rome II questionnaire has never been thoroughly validated before even if diagnoses made by the Rome criteria have been compared to diagnoses made in clinical practice. Conclusion The accuracy of the Swedish version of

Deliverable D7.5 - Best Practices for Replicability and Wider Use

OpenAIRE

Karantjias, Thanos; Papastergiou, Spyros; Zacharias, Marios; Purcarea, Razvan; Cocor, Gabriel; Chatzikou, Menia; Douligeris, Christos; Negkas, Dimitrios; Mitropoulos, Sarantis; Daikos, Lampros; Bosse, Claudia

2018-01-01

Despite the importance of Critical Information Infrastructures (CIIs) and dynamic ICT‐based maritime supply chains (SCs) for port operations, state‐of‐the‐art Risk Management (RM) methodologies for maritime environments pay limited attention to cyber‐security and do not adequately address security processes for international SCs. Motivated by these limitations, MITIGATE will introduce, integrate, validate and commercialize a novel RM system, which will empower stakeholders’ collaboration for ...

Towards Validating Risk Indicators Based on Measurement Theory (Extended version)

NARCIS (Netherlands)

Morali, A.; Wieringa, Roelf J.

Due to the lack of quantitative information and for cost-efficiency, most risk assessment methods use partially ordered values (e.g. high, medium, low) as risk indicators. In practice it is common to validate risk indicators by asking stakeholders whether they make sense. This way of validation is

Learning Approaches - Final Report Sub-Project 4

DEFF Research Database (Denmark)

Dirckinck-Holmfeld, Lone; Rodríguez Illera, José Luis; Escofet, Anna

2007-01-01

The overall aim of Subproject 4 is to apply learning approaches that are appropriate and applicable using ICT. The task is made up of two components 4.1 dealing with learning approaches (see deliverable 4.1), and component 4.2 application of ICT (see deliverable 4.2, deliverable 4.3 & deliverable...

Texture analysis on the fluence map to evaluate the degree of modulation for volumetric modulated arc therapy

Energy Technology Data Exchange (ETDEWEB)

Park, So-Yeon [Department of Radiation Oncology, Seoul National University Hospital, Seoul 110-744 (Korea, Republic of); Institute of Radiation Medicine, Seoul National University Medical Research Center, Seoul 110-744 (Korea, Republic of); Biomedical Research Institute, Seoul National University College of Medicine, Seoul 110-744 (Korea, Republic of); Interdisciplinary Program in Radiation Applied Life Science, Seoul National University College of Medicine, Seoul 110-799 (Korea, Republic of); Kim, Il Han [Department of Radiation Oncology, Seoul National University Hospital, Seoul 110-744 (Korea, Republic of); Institute of Radiation Medicine, Seoul National University Medical Research Center, Seoul 110-744 (Korea, Republic of); Biomedical Research Institute, Seoul National University College of Medicine, Seoul 110-744 (Korea, Republic of); Department of Radiation Oncology, Seoul National University College of Medicine, Seoul 110-744 (Korea, Republic of); Ye, Sung-Joon [Department of Radiation Oncology, Seoul National University Hospital, Seoul 110-744, (Korea, Republic of); Institute of Radiation Medicine, Seoul National University Medical Research Center, Seoul 110-744 (Korea, Republic of); Biomedical Research Institute, Seoul National University College of Medicine, Seoul 110-744 (Korea, Republic of); Program in Biomedical Radiation Sciences, Department of Transdisciplinary Studies, Seoul National University Graduate School of Convergence Science and Technology, Suwon 433-270 (Korea, Republic of); Carlson, Joel [Biomedical Research Institute, Seoul National University College of Medicine, Seoul 110-744 (Korea, Republic of); Program in Biomedical Radiation Sciences, Department of Transdisciplinary Studies, Seoul National University Graduate School of Convergence Science and Technology, Suwon 433-270 (Korea, Republic of); and others

2014-11-01

{sub s} values of contrast to the global gamma passing rates with criteria of 2%/2 mm, 2%/1 mm, and 1%/2 mm were 0.536, 0.473, and 0.718, respectively. The respective values for variance were 0.551, 0.481, and 0.688. In the case of local gamma passing rates, the r{sub s} values of contrast were 0.547, 0.578, and 0.620, respectively, and those of variance were 0.519, 0.527, and 0.569. All of the r{sub s} values in those cases were statistically significant (p < 0.003). In the cases of global and local gamma passing rates, MI{sub SPORT} showed the highest correlations among the conventional modulation indices. For global passing rates, r{sub s} values of MI{sub SPORT} were −0.420, −0.330, and −0.632, respectively, and those for local passing rates were −0.455, −0.490 and −0.502. The values of r{sub s} of contrast, variance, and MI{sub SPORT} with the MLC errors were −0.863, −0.828, and 0.795, respectively, all with statistical significances (p < 0.001). The correlations with statistical significances between variance and dose-volumetric differences were observed more frequently than the others. Conclusions: The contrast (d = 1) and variance (d = 1) calculated from fluence maps of VMAT plans showed considerable correlations with the plan deliverability, indicating their potential use as indicators for assessing the degree of modulation of VMAT plans. Both contrast and variance consistently showed better performance than the conventional modulation indices for VMAT.

Assessing Discriminative Performance at External Validation of Clinical Prediction Models.

Directory of Open Access Journals (Sweden)

Daan Nieboer

Full Text Available External validation studies are essential to study the generalizability of prediction models. Recently a permutation test, focusing on discrimination as quantified by the c-statistic, was proposed to judge whether a prediction model is transportable to a new setting. We aimed to evaluate this test and compare it to previously proposed procedures to judge any changes in c-statistic from development to external validation setting.We compared the use of the permutation test to the use of benchmark values of the c-statistic following from a previously proposed framework to judge transportability of a prediction model. In a simulation study we developed a prediction model with logistic regression on a development set and validated them in the validation set. We concentrated on two scenarios: 1 the case-mix was more heterogeneous and predictor effects were weaker in the validation set compared to the development set, and 2 the case-mix was less heterogeneous in the validation set and predictor effects were identical in the validation and development set. Furthermore we illustrated the methods in a case study using 15 datasets of patients suffering from traumatic brain injury.The permutation test indicated that the validation and development set were homogenous in scenario 1 (in almost all simulated samples and heterogeneous in scenario 2 (in 17%-39% of simulated samples. Previously proposed benchmark values of the c-statistic and the standard deviation of the linear predictors correctly pointed at the more heterogeneous case-mix in scenario 1 and the less heterogeneous case-mix in scenario 2.The recently proposed permutation test may provide misleading results when externally validating prediction models in the presence of case-mix differences between the development and validation population. To correctly interpret the c-statistic found at external validation it is crucial to disentangle case-mix differences from incorrect regression coefficients.

CVTresh: R Package for Level-Dependent Cross-Validation Thresholding

Directory of Open Access Journals (Sweden)

Donghoh Kim

2006-04-01

Full Text Available The core of the wavelet approach to nonparametric regression is thresholding of wavelet coefficients. This paper reviews a cross-validation method for the selection of the thresholding value in wavelet shrinkage of Oh, Kim, and Lee (2006, and introduces the R package CVThresh implementing details of the calculations for the procedures. This procedure is implemented by coupling a conventional cross-validation with a fast imputation method, so that it overcomes a limitation of data length, a power of 2. It can be easily applied to the classical leave-one-out cross-validation and K-fold cross-validation. Since the procedure is computationally fast, a level-dependent cross-validation can be developed for wavelet shrinkage of data with various sparseness according to levels.

CVTresh: R Package for Level-Dependent Cross-Validation Thresholding

Directory of Open Access Journals (Sweden)

Donghoh Kim

2006-04-01

Full Text Available The core of the wavelet approach to nonparametric regression is thresholding of wavelet coefficients. This paper reviews a cross-validation method for the selection of the thresholding value in wavelet shrinkage of Oh, Kim, and Lee (2006, and introduces the R package CVThresh implementing details of the calculations for the procedures.This procedure is implemented by coupling a conventional cross-validation with a fast imputation method, so that it overcomes a limitation of data length, a power of 2. It can be easily applied to the classical leave-one-out cross-validation and K-fold cross-validation. Since the procedure is computationally fast, a level-dependent cross-validation can be developed for wavelet shrinkage of data with various sparseness according to levels.

Estimation of value at risk and conditional value at risk using normal mixture distributions model

Science.gov (United States)

Kamaruzzaman, Zetty Ain; Isa, Zaidi

2013-04-01

Normal mixture distributions model has been successfully applied in financial time series analysis. In this paper, we estimate the return distribution, value at risk (VaR) and conditional value at risk (CVaR) for monthly and weekly rates of returns for FTSE Bursa Malaysia Kuala Lumpur Composite Index (FBMKLCI) from July 1990 until July 2010 using the two component univariate normal mixture distributions model. First, we present the application of normal mixture distributions model in empirical finance where we fit our real data. Second, we present the application of normal mixture distributions model in risk analysis where we apply the normal mixture distributions model to evaluate the value at risk (VaR) and conditional value at risk (CVaR) with model validation for both risk measures. The empirical results provide evidence that using the two components normal mixture distributions model can fit the data well and can perform better in estimating value at risk (VaR) and conditional value at risk (CVaR) where it can capture the stylized facts of non-normality and leptokurtosis in returns distribution.

System of tactical assessment in Soccer (FUT-SAT: Development and preliminary validation

Directory of Open Access Journals (Sweden)

I.T. Costa

2011-01-01

Full Text Available The purpose of this paper was to report the development and preliminary validation of tactical assessment system in Soccer and highlight its advantages. The validation process followed five perspectives of the concept of validity that consider the value of heuristic methods and the importance of the description of behavior performed in playing situations. Thus, the process of validation was focused on four points: i acceptability and reasonableness of the test perceived by players; ii analysis of content of assessment tool through a panel of experts; iii potential of the assessment tool to discriminate the quality of the performance of players; iv observation reliability. The results displayed values higher than 0.63 for correlation between the evaluations of coaches and the system. It shows the potential of this system to distinguish the performances of players based on the evaluations of coaches. The players who performed the field test agreed with its physical demands and spatial and normative configurations. All experts endorsed the categories and variables of this system. The reliabilities showed values higher than 0.79 for intra and inter-observers. Therefore, it is possible to conclude that the system is valid and reliable for the assessment of the tactical behavior of soccer players.

Simulation of Porous Medium Hydrogen Storage - Estimation of Storage Capacity and Deliverability for a North German anticlinal Structure

Science.gov (United States)

Wang, B.; Bauer, S.; Pfeiffer, W. T.

2015-12-01

Large scale energy storage will be required to mitigate offsets between electric energy demand and the fluctuating electric energy production from renewable sources like wind farms, if renewables dominate energy supply. Porous formations in the subsurface could provide the large storage capacities required if chemical energy carriers such as hydrogen gas produced during phases of energy surplus are stored. This work assesses the behavior of a porous media hydrogen storage operation through numerical scenario simulation of a synthetic, heterogeneous sandstone formation formed by an anticlinal structure. The structural model is parameterized using data available for the North German Basin as well as data given for formations with similar characteristics. Based on the geological setting at the storage site a total of 15 facies distributions is generated and the hydrological parameters are assigned accordingly. Hydraulic parameters are spatially distributed according to the facies present and include permeability, porosity relative permeability and capillary pressure. The storage is designed to supply energy in times of deficiency on the order of seven days, which represents the typical time span of weather conditions with no wind. It is found that using five injection/extraction wells 21.3 mio sm³ of hydrogen gas can be stored and retrieved to supply 62,688 MWh of energy within 7 days. This requires a ratio of working to cushion gas of 0.59. The retrievable energy within this time represents the demand of about 450000 people. Furthermore it is found that for longer storage times, larger gas volumes have to be used, for higher delivery rates additionally the number of wells has to be increased. The formation investigated here thus seems to offer sufficient capacity and deliverability to be used for a large scale hydrogen gas storage operation.

Development and Validation of an Automated Step Ergometer

Directory of Open Access Journals (Sweden)

C. de Sousa Maria do Socorro

2014-12-01

Full Text Available Laboratory ergometers have high costs, becoming inaccessible for most of the population, hence, it is imperative to develop affordable devices making evaluations like cardiorespiratory fitness feasible and easier. The objective of this study was to develop and validate an Automated Step Ergometer (ASE, adjusted according to the height of the subject, for predicting VO2max through a progressive test. The development process was comprised by three steps, the theoretical part, the prototype assembly and further validation. The ASE consists in an elevating platform that makes the step at a higher or lower level as required for testing. The ASE validation was obtained by comparing the values of predicted VO2max (equation and direct gas analysis on the prototype and on a, treadmill. For the validation process 167 subjects with average age of 31.24 ± 14.38 years, of both genders and different degrees of cardiorespiratory fitness, were randomized and divided by gender and training condition, into untrained (n=106, active (n=24 and trained (n=37 subjects. Each participant performed a progressive test on which the ASE started at the same height (20 cm for all. Then, according to the subject’s height, it varied to a maximum of 45 cm. Time in each stage and rhythm was chosen in accordance with training condition from lowest to highest (60-180 s; 116-160 bpm, respectively. Data was compared with the student’s t test and ANOVA; correlations were tested with Pearson’s r. The value of α was set at 0.05. No differences were found between the predicted VO2max and the direct gas analysis VO2max, nor between the ASE and treadmill VO2max (p= 0.365 with high correlation between ergometers (r= 0.974. The values for repeatability, reproducibility, and reliability of male and female groups measures were, respectively, 4.08 and 5.02; 0.50 and 1.11; 4.11 and 5.15. The values of internal consistency (Cronbach’s alpha among measures were all >0.90. It was verified

Does an eye-hand coordination test have added value as part of talent identification in table tennis? A validity and reproducibility study.

Directory of Open Access Journals (Sweden)

Irene R Faber

Full Text Available This study investigated the added value, i.e. discriminative and concurrent validity and reproducibility, of an eye-hand coordination test relevant to table tennis as part of talent identification. Forty-three table tennis players (7-12 years from national (n = 13, regional (n = 11 and local training centres (n = 19 participated. During the eye-hand coordination test, children needed to throw a ball against a vertical positioned table tennis table with one hand and to catch the ball correctly with the other hand as frequently as possible in 30 seconds. Four different test versions were assessed varying the distance to the table (1 or 2 meter and using a tennis or table tennis ball. 'Within session' reproducibility was estimated for the two attempts of the initial tests and ten youngsters were retested after 4 weeks to estimate 'between sessions' reproducibility. Validity analyses using age as covariate showed that players from the national and regional centres scored significantly higher than players from the local centre in all test versions (p<0.05. The tests at 1 meter demonstrated better discriminative ability than those at 2 meter. While all tests but one had a positive significant association with competition outcome, which were corrected for age influences, the version with a table tennis ball at 1 meter showed the highest association (r = 0.54; p = 0.001. Differences between the first and second attempts were comparable for all test versions (between -8 and +7 repetitions with ICC's ranging from 0.72 to 0.87. The smallest differences were found for the test with a table tennis ball at 1 meter (between -3 and +3 repetitions. Best test version as part of talent identification appears to be the version with a table tennis ball at 1 meter regarding the psychometric characteristics evaluated. Longitudinal studies are necessary to evaluate the predictive value of this test.

Nickel quantification in serum by a validated sector-field inductively coupled plasma mass spectrometry method: Assessment of tentative reference values for an Italian population.

Science.gov (United States)

Bocca, Beatrice; Forte, Giovanni; Ronchi, Anna; Gaggeri, Raffaella; Alimonti, Alessandro; Minoia, Claudio

2006-01-01

The daily exposure to Ni from food, industrial processes, jewellery and coins makes the determination of Ni in human serum an important way to monitor the health status in non-occupationally exposed subjects. To this end, a method based on sector-field inductively coupled plasma mass spectrometry was developed and validated. The limits of detection (LoD) and quantification (LoQ), sensitivity, linearity range, trueness, repeatability, within-laboratory reproducibility and robustness were the considered issues of the validation process. The uncertainty associated with the measurements was also calculated, according to the Eurachem/Citac Guide. The method LoD and LoQ were 0.03 and 0.09 ng mL(-1), linearity was over two order of magnitude, trueness was -3.57%, and the repeatability and reproducibility showed relative standard deviations equal to 4.56% and 6.52%, respectively. The relative expanded uncertainty was 21.8% at the Ni levels found in the general population. The tentative reference value for serum Ni was 0.466 +/- 0.160 ng mL(-1) with a related interval between 0.226 and 1.026 ng mL(-1). Copyright 2006 John Wiley & Sons, Ltd.

Diabetes ongoing sustainable care and treatment (DOST): A strategy for informational deliverance through visual dynamic modules sustained by near peer mentoring.

Science.gov (United States)

Joshi, Ankur; Arutagi, Vishwanath; Nahar, Nitin; Tiwari, Sharad; Singh, Daneshwar; Sethia, Soumitra

2016-01-01

The informational continuity for a diabetic patient is of paramount importance. This study on a pilot basis explores the process utility of structured educational modular sessions grounded on the principle of near-peer mentoring. Visual modules were prepared for diabetic patients. These modules were instituted to 25 diabetic patients in logical sequences. In the next phase, 4 persons of these 25 patients were designated as diabetic-diabetes ongoing sustainable care and treatment (DOST). Each diabetic-DOST was clubbed with two patients for modular session and informational deliverance during the next 7 days. Process analysis was performed with "proxy-indicators," namely, monthly glycemic status, knowledge assessment scores, and quality of life. Data were analyzed by interval estimates and through nonparametric analysis. Nonparametric analysis indicated a significant improvement in glycemic status in terms with fasting blood sugar (W = 78 z = 3.04, P = 0.002), 2 h-postprandial blood sugar (W = 54, z = 2.01, P = 0.035), and in knowledge score (χ 2 = 19.53, df = 3; P = 0.0002). Quality of life score showed significant improvement in 2 out of 7 domains, namely, satisfaction with treatment ([difference in mean score = 1.40 [1.94 to 0.85]) and symptom botherness (difference in mean score = 0.98 [1.3-0.65]). Because of inherent methodological limitations and innate biases, at this juncture no conclusive statement can be drawn. Although, primitive process evidences indicate the promising role of the diabetic-DOST strategy.

The Math-Biology Values Instrument: Development of a Tool to Measure Life Science Majors' Task Values of Using Math in the Context of Biology.

Science.gov (United States)

Andrews, Sarah E; Runyon, Christopher; Aikens, Melissa L

2017-01-01

In response to calls to improve the quantitative training of undergraduate biology students, there have been increased efforts to better integrate math into biology curricula. One challenge of such efforts is negative student attitudes toward math, which are thought to be particularly prevalent among biology students. According to theory, students' personal values toward using math in a biological context will influence their achievement and behavioral outcomes, but a validated instrument is needed to determine this empirically. We developed the Math-Biology Values Instrument (MBVI), an 11-item college-level self--report instrument grounded in expectancy-value theory, to measure life science students' interest in using math to understand biology, the perceived usefulness of math to their life science career, and the cost of using math in biology courses. We used a process that integrates multiple forms of validity evidence to show that scores from the MBVI can be used as a valid measure of a student's value of math in the context of biology. The MBVI can be used by instructors and researchers to help identify instructional strategies that influence math-biology values and understand how math-biology values are related to students' achievement and decisions to pursue more advanced quantitative-based courses. © 2017 S. E. Andrews et al. CBE—Life Sciences Education © 2017 The American Society for Cell Biology. This article is distributed by The American Society for Cell Biology under license from the author(s). It is available to the public under an Attribution–Noncommercial–Share Alike 3.0 Unported Creative Commons License (http://creativecommons.org/licenses/by-nc-sa/3.0).

Validation of heat transfer models for gap cooling

International Nuclear Information System (INIS)

Okano, Yukimitsu; Nagae, Takashi; Murase, Michio

2004-01-01

For severe accident assessment of a light water reactor, models of heat transfer in a narrow annular gap between overheated core debris and a reactor pressure vessel are important for evaluating vessel integrity and accident management. The authors developed and improved the models of heat transfer. However, validation was not sufficient for applicability of the gap heat flux correlation to the debris cooling in the vessel lower head and applicability of the local boiling heat flux correlations to the high-pressure conditions. Therefore, in this paper, we evaluated the validity of the heat transfer models and correlations by analyses for ALPHA and LAVA experiments where molten aluminum oxide (Al 2 O 3 ) at about 2700 K was poured into the high pressure water pool in a small-scale simulated vessel lower head. In the heating process of the vessel wall, the calculated heating rate and peak temperature agreed well with the measured values, and the validity of the heat transfer models and gap heat flux correlation was confirmed. In the cooling process of the vessel wall, the calculated cooling rate was compared with the measured value, and the validity of the nucleate boiling heat flux correlation was confirmed. The peak temperatures of the vessel wall in ALPHA and LAVA experiments were lower than the temperature at the minimum heat flux point between film boiling and transition boiling, so the minimum heat flux correlation could not be validated. (author)

Social value and information quality in online health information search

OpenAIRE

Hameed, Tahir; Swar, Bobby

2016-01-01

This paper extends and validates a model of value-driven online healthcare information search in online shared contexts. Perceived value is an important factor behind users' decisions concerning search, consumption and reuse of products and services. The role of utilitarian, hedonic and epistemic value of information in user satisfaction and intention to repeat online search is well recognized, but little support has been found for social value affecting user satisfaction critical for such de...

Symptomatic peripheral arterial disease: the value of a validated questionnaire and a clinical decision rule

NARCIS (Netherlands)

Bendermacher, Bianca L. W.; Teijink, Joep A. W.; Willigendael, Edith M.; Bartelink, Marie-Louise; Büller, Harry R.; Peters, Ron J. G.; Boiten, Jelis; Langenberg, Machteld; Prins, Martin H.

2006-01-01

BACKGROUND: If a validated questionnaire, when applied to patients reporting with symptoms of intermittent claudication, could adequately discriminate between those with and without peripheral arterial disease, GPs could avoid the diagnostic measurement of the ankle brachial index. AIM: To

What is the value of Values Based Recruitment for nurse education programmes?

Science.gov (United States)

Groothuizen, Johanna E; Callwood, Alison; Gallagher, Ann

2018-05-01

A discussion of issues associated with Values Based Recruitment (VBR) for nurse education programmes. Values Based Recruitment is a mandatory element in selection processes of students for Higher Education healthcare courses in England, including all programmes across nursing. Students are selected on the basis that their individual values align with those presented in the Constitution of the National Health Service. However, there are issues associated with the use of values as selection criteria that have been insufficiently addressed. These are discussed. Discussion paper. This article is based on documents published on the website of the executive body responsible for the implementation of a policy regarding VBR in Higher Education Institutions up until June 2017 and our evaluation of the conceptualisation of VBR, underpinned by contemporary theory and literature. Values Based Recruitment influences who is accepted onto a nurse education programme, but there has been limited critical evaluation regarding the effectiveness of employing values as selection criteria. Values are subject to interpretation and evidence regarding whether or how VBR will improve practice and care is lacking. The issues discussed in this article show that Higher Education Institutions offering nursing courses, whether in England or in other countries, should be critical and reflective regarding the implementation of VBR methods. We call for a debate regarding the meaning and implications of VBR and further research regarding its validity and effectiveness. © 2017 John Wiley & Sons Ltd.

Validation of epilepsy diagnoses in the Danish National Hospital Register

DEFF Research Database (Denmark)

Christensen, Jakob; Vestergaard, Mogens; Olsen, Jørn

2007-01-01

PURPOSE: To validate the diagnosis of epilepsy in the Danish National Hospital Register. METHODS: We randomly selected 200 patients registered with epilepsy in the Danish National Hospital Register between 1977 and 2002 and validated the diagnosis according to the guidelines developed...... by the International League Against Epilepsy. RESULTS: We reviewed the medical records of 188 (94%) persons from 57 departments at 41 hospitals. The epilepsy diagnoses were confirmed in 153 patients, providing a positive predictive value for epilepsy of 81% (95% confidence interval (95% CI): 75-87%). Among the 35...... for syndrome classification was 60% (95% CI: 44-74%) for epilepsy with complex focal seizures and 35% (95% CI: 22-51%) for primary generalized epilepsy. CONCLUSION: The validity of the epilepsy diagnoses in the Danish National Hospital Register has a moderate to high positive predictive value for epilepsy...

Value of risk management

OpenAIRE

Vik, Marie Amdal

2012-01-01

Master's thesis in Risk management The overall aim of this study was to discuss the validity of the hypothesis that risk management contributes with added value to projects and the enterprise holding the projects, and consequently to the enterprise’s stakeholders. To examine this hypothesis, a case study of three projects taken from the same portfolio at Statoil was selected. The projects were said to have an active risk management. Data was collected from the project’s documentation as...

Frankenstein's Validity Monster: The Value of Keeping Politics and Science Separated

Science.gov (United States)

Borsboom, Denny; Wijsen, Lisa D.

2016-01-01

The distinction between facts and moral values is highly desirable: science and politics should keep to their own territories. Traditionally speaking, science can be seen as an ivory tower, which attempts to do its job in isolation of external influences. Politics does not mandate methods of scientific research or standards of justification;…

Validation and Application of the Survey of Teaching Beliefs and Practices for Undergraduates (STEP-U): Identifying Factors Associated with Valuing Important Workplace Skills among Biology Students.

Science.gov (United States)

Marbach-Ad, Gili; Rietschel, Carly; Thompson, Katerina V

2016-01-01

We present a novel assessment tool for measuring biology students' values and experiences across their undergraduate degree program. Our Survey of Teaching Beliefs and Practices for Undergraduates (STEP-U) assesses the extent to which students value skills needed for the workplace (e.g., ability to work in groups) and their experiences with teaching practices purported to promote such skills (e.g., group work). The survey was validated through factor analyses in a large sample of biology seniors (n = 1389) and through response process analyses (five interviewees). The STEP-U skills items were characterized by two underlying factors: retention (e.g., memorization) and transfer (e.g., knowledge application). Multiple linear regression models were used to examine relationships between classroom experiences, values, and student characteristics (e.g., gender, cumulative grade point average [GPA], and research experience). Student demographic and experiential factors predicted the extent to which students valued particular skills. Students with lower GPAs valued retention skills more than those with higher GPAs. Students with research experience placed greater value on scientific writing and interdisciplinary understanding. Greater experience with specific teaching practices was associated with valuing the corresponding skills more highly. The STEP-U can provide feedback vital for designing curricula that better prepare students for their intended postgraduate careers. © 2016 G. Marbach-Ad et al. CBE—Life Sciences Education © 2016 The American Society for Cell Biology. This article is distributed by The American Society for Cell Biology under license from the author(s). It is available to the public under an Attribution–Noncommercial–Share Alike 3.0 Unported Creative Commons License (http://creativecommons.org/licenses/by-nc-sa/3.0).

Analysis within the systems development life-cycle

CERN Document Server

Rock-Evans, Rosemary

1987-01-01

Analysis within the Systems Development Life-Cycle, Book 3: Activity Analysis - The Deliverables provides a comprehensive coverage of the deliverables of activity analysis. The book also details purpose of each deliverable in the context of the next tasks in the systems development cycle (SDC). The text first covers the concept of deliverables and the benefits of making deliverables visible. In the second chapter, the book introduces the main concepts and diagrammatic techniques of activity analysis. The third chapter deals with the important classes or categories of concept, while the fourth

Epidemiological cut-off values for Flavobacterium psychrophilum MIC data generated by a standard test protocol.

Science.gov (United States)

Smith, P; Endris, R; Kronvall, G; Thomas, V; Verner-Jeffreys, D; Wilhelm, C; Dalsgaard, I

2016-02-01

Epidemiological cut-off values were developed for application to antibiotic susceptibility data for Flavobacterium psychrophilum generated by standard CLSI test protocols. The MIC values for ten antibiotic agents against Flavobacterium psychrophilum were determined in two laboratories. For five antibiotics, the data sets were of sufficient quality and quantity to allow the setting of valid epidemiological cut-off values. For these agents, the cut-off values, calculated by the application of the statistically based normalized resistance interpretation method, were ≤16 mg L(-1) for erythromycin, ≤2 mg L(-1) for florfenicol, ≤0.025 mg L(-1) for oxolinic acid (OXO), ≤0.125 mg L(-1) for oxytetracycline and ≤20 (1/19) mg L(-1) for trimethoprim/sulphamethoxazole. For ampicillin and amoxicillin, the majority of putative wild-type observations were 'off scale', and therefore, statistically valid cut-off values could not be calculated. For ormetoprim/sulphadimethoxine, the data were excessively diverse and a valid cut-off could not be determined. For flumequine, the putative wild-type data were extremely skewed, and for enrofloxacin, there was inadequate separation in the MIC values for putative wild-type and non-wild-type strains. It is argued that the adoption of OXO as a class representative for the quinolone group would be a valid method of determining susceptibilities to these agents. © 2014 John Wiley & Sons Ltd.

Tank waste remediation system retrieval and disposal mission readiness-to-proceed guidance and requirements to deliverables crosswalk

International Nuclear Information System (INIS)

Hall, C.E.

1998-01-01

In September 1996, the US Department of Energy, Richland Operations Office (RL) initiated the first of a two-phase program to remediate waste storage in tanks at the Hanford Site in Washington State. Initiating the first phase, RL signed contracts with two private companies who agreed to receive and vitrify a portion of the tank waste in a demonstration and to return the vitrified product and by-products to the Project Management Hanford Contract (PHMC) team for disposition. The first phase of the overall remediation effort is a demonstration of treatment concepts, and the second phase includes treatment of the remaining tank wastes. The demonstration phase, Phase 1 of the project, is further subdivided into two parts, A and B. During Phase 1A, the vitrification contractors are to establish the technical, operational, regulatory, business, and financial elements required to provide treatment services on a fixed unit price basis. Phase 1A deliverables will be evaluated by RL to determine whether it is in the best interest of the government to have one or more vitrification contractors proceed with Phase 1B, in which 6% to 13% of the tank waste would be treated in the demonstration. In addition, before RL can authorize proceeding with Phase 1B, the PHMC team must demonstrate its readiness to retrieve and deliver the waste to the private contractor(s) and to receive and dispose of the products and by-products returned from the treatment. The PHMC team has organized their plans for providing these vitrification-support services into the Retrieval and Disposal Mission within the Tank Waste Remediation System (TWRS) Project. Three RL core teams were established to assist in evaluating the PHMC team's readiness specifically in regard to three task areas: Waste feed delivery; Infrastructure and by-products delivery; and Immobilized products. The core teams each developed a set of criteria and plans to be used in evaluating the PHMC team's readiness to proceed (RTP)

Method validation for uranium content analysis using a potentiometer T-90

International Nuclear Information System (INIS)

Torowati; Ngatijo; Rahmiati

2016-01-01

An experimental method validation has been conducted for uranium content analysis using Potentiometer T-90. The method validation experiment was performed in the quality control laboratory of Experiment Fuel Element Installation, PTBBN - BATAN. The objective is to determine the level of precision and accuracy of analytical results for uranium analysis referring to the latest American Standard Test Method (ASTM) of ASTM C1267-11, which is a modified reference method by reducing of reagent consumption by 10% of the amount used by the original method. The ASTM C 1267-11 reference is a new ASTM as a substitute for the older ASTM namely ASTM C799, Vol.12.01, 2003. It is, therefore, necessary to validate the renewed method. The tool used for the analysis of uranium was potentiometer T-90 and the material used was standard uranium oxide powder CRM (Certificate Reference Material). Validation of the method was done by analyzing standard uranium powder by 7 times weighing and 7 times analysis. Analysis results were used to determine the level of accuracy, precision, Relative Standard Deviation (RSD) and Horwitz coefficient Variation and limit detection and quantitation. The average uranium obtained for this method validation is 84.36% with Standard Deviation (SD) of 0.12%, Relative Standard Deviation (RSD) 0.14% and 2/3 Horwitz coefficient Variation (CV Horwitz) 2.05%. The results show that RSD value is smaller than the value of (2/3) CV Horwitz, which means that this method has a high precision. The accuracy value obtained is 0.48%, and since the acceptance limit of high level of accuracy is when the accuracy value is <2.00%, this method is regarded as having a high degree of accuracy [1]. The limit of detection (LOD) and and the limit of quantitation (LOQ) are 0.0145 g/L and 0.0446 g/L respectively. It is concluded that the ASTM C 1267-11 reference method is valid for use. (author)

Validating Acquisition IS Integration Readiness with Drills

DEFF Research Database (Denmark)

Wynne, Peter J.

2017-01-01

To companies, mergers and acquisitions are important strategic tools, yet they often fail to deliver their expected value. Studies have shown the integration of information systems is a significant roadblock to the realisation of acquisition benefits, and for an IT department to be ready......), to understand how an IT department can use them to validate their integration plans. The paper presents a case study of two drills used to validate an IT department’s readiness to carry out acquisition IS integration, and suggests seven acquisition IS integration drill characteristics others could utilise when...

Predictive value of stroke discharge diagnoses in the Danish National Patient Register.

Science.gov (United States)

Lühdorf, Pernille; Overvad, Kim; Schmidt, Erik B; Johnsen, Søren P; Bach, Flemming W

2017-08-01

To determine the positive predictive values for stroke discharge diagnoses, including subarachnoidal haemorrhage, intracerebral haemorrhage and cerebral infarction in the Danish National Patient Register. Participants in the Danish cohort study Diet, Cancer and Health with a stroke discharge diagnosis in the National Patient Register between 1993 and 2009 were identified and their medical records were retrieved for validation of the diagnoses. A total of 3326 records of possible cases of stroke were reviewed. The overall positive predictive value for stroke was 69.3% (95% confidence interval (CI) 67.8-70.9%). The predictive values differed according to hospital characteristics, with the highest predictive value of 87.8% (95% CI 85.5-90.1%) found in departments of neurology and the lowest predictive value of 43.0% (95% CI 37.6-48.5%) found in outpatient clinics. The overall stroke diagnosis in the Danish National Patient Register had a limited predictive value. We therefore recommend the critical use of non-validated register data for research on stroke. The possibility of optimising the predictive values based on more advanced algorithms should be considered.

Fair Value Accounting for Financial Instruments – Conceptual Approach and Implications

OpenAIRE

Dumitru MATIS; Carmen Giorgiana BONACI

2008-01-01

This study complements the growing literature on the value relevance of fair value by examining the validity of the hypothesis that fair value is more informative than historical cost as a financial reporting standard for financial instruments. We therefore compare the relative explanatory power of fair value and historical cost in explaining equity values. In order to reflect fair values’ role in offering the fair view where financial instruments are concerned we briefly reviewed capital mar...

Linguistic validation of stigmatisation degree, self-esteem and knowledge questionnaire among asthma patients using Rasch analysis.

Science.gov (United States)

Ahmad, Sohail; Ismail, Ahmad Izuanuddin; Khan, Tahir Mehmood; Akram, Waqas; Mohd Zim, Mohd Arif; Ismail, Nahlah Elkudssiah

2017-04-01

The stigmatisation degree, self-esteem and knowledge either directly or indirectly influence the control and self-management of asthma. To date, there is no valid and reliable instrument that can assess these key issues collectively. The main aim of this study was to test the reliability and validity of the newly devised and translated "Stigmatisation Degree, Self-Esteem and Knowledge Questionnaire" among adult asthma patients using the Rasch measurement model. This cross-sectional study recruited thirty adult asthma patients from two respiratory specialist clinics in Selangor, Malaysia. The newly devised self-administered questionnaire was adapted from relevant publications and translated into the Malay language using international standard translation guidelines. Content and face validation was done. The data were extracted and analysed for real item reliability and construct validation using the Rasch model. The translated "Stigmatisation Degree, Self-Esteem and Knowledge Questionnaire" showed high real item reliability values of 0.90, 0.86 and 0.89 for stigmatisation degree, self-esteem, and knowledge of asthma, respectively. Furthermore, all values of point measure correlation (PTMEA Corr) analysis were within the acceptable specified range of the Rasch model. Infit/outfit mean square values and Z standard (ZSTD) values of each item verified the construct validity and suggested retaining all the items in the questionnaire. The reliability analyses and output tables of item measures for construct validation proved the translated Malaysian version of "Stigmatisation Degree, Self-Esteem and Knowledge Questionnaire" as a valid and highly reliable questionnaire.

Turkish Version of Kolcaba's Immobilization Comfort Questionnaire: A Validity and Reliability Study.

Science.gov (United States)

Tosun, Betül; Aslan, Özlem; Tunay, Servet; Akyüz, Aygül; Özkan, Hüseyin; Bek, Doğan; Açıksöz, Semra

2015-12-01

The purpose of this study was to determine the validity and reliability of the Turkish version of the Immobilization Comfort Questionnaire (ICQ). The sample used in this methodological study consisted of 121 patients undergoing lower extremity arthroscopy in a training and research hospital. The validity study of the questionnaire assessed language validity, structural validity and criterion validity. Structural validity was evaluated via exploratory factor analysis. Criterion validity was evaluated by assessing the correlation between the visual analog scale (VAS) scores (i.e., the comfort and pain VAS scores) and the ICQ scores using Spearman's correlation test. The Kaiser-Meyer-Olkin coefficient and Bartlett's test of sphericity were used to determine the suitability of the data for factor analysis. Internal consistency was evaluated to determine reliability. The data were analyzed with SPSS version 15.00 for Windows. Descriptive statistics were presented as frequencies, percentages, means and standard deviations. A p value ≤ .05 was considered statistically significant. A moderate positive correlation was found between the ICQ scores and the VAS comfort scores; a moderate negative correlation was found between the ICQ and the VAS pain measures in the criterion validity analysis. Cronbach α values of .75 and .82 were found for the first and second measurements, respectively. The findings of this study reveal that the ICQ is a valid and reliable tool for assessing the comfort of patients in Turkey who are immobilized because of lower extremity orthopedic problems. Copyright © 2015. Published by Elsevier B.V.

Explicit validation of a surface shortwave radiation balance model over snow-covered complex terrain

Science.gov (United States)

Helbig, N.; Löwe, H.; Mayer, B.; Lehning, M.

2010-09-01

A model that computes the surface radiation balance for all sky conditions in complex terrain is presented. The spatial distribution of direct and diffuse sky radiation is determined from observations of incident global radiation, air temperature, and relative humidity at a single measurement location. Incident radiation under cloudless sky is spatially derived from a parameterization of the atmospheric transmittance. Direct and diffuse sky radiation for all sky conditions are obtained by decomposing the measured global radiation value. Spatial incident radiation values under all atmospheric conditions are computed by adjusting the spatial radiation values obtained from the parametric model with the radiation components obtained from the decomposition model at the measurement site. Topographic influences such as shading are accounted for. The radiosity approach is used to compute anisotropic terrain reflected radiation. Validations of the shortwave radiation balance model are presented in detail for a day with cloudless sky. For a day with overcast sky a first validation is presented. Validation of a section of the horizon line as well as of individual radiation components is performed with high-quality measurements. A new measurement setup was designed to determine terrain reflected radiation. There is good agreement between the measurements and the modeled terrain reflected radiation values as well as with incident radiation values. A comparison of the model with a fully three-dimensional radiative transfer Monte Carlo model is presented. That validation reveals a good agreement between modeled radiation values.

Ensuring the Validity of the Micro Foundation in DSGE Models

DEFF Research Database (Denmark)

Andreasen, Martin Møller

& Primiceri (American Economic Review, forth- coming) and Fernández-Villaverde & Rubio-Ramírez (Review of Economic Studies, 2007) do not satisfy these sufficient conditions, or any other known set of conditions ensuring finite values for the objective functions. Thus, the validity of the micro foundation......The presence of i) stochastic trends, ii) deterministic trends, and/or iii) stochastic volatil- ity in DSGE models may imply that the agents' objective functions attain infinite values. We say that such models do not have a valid micro foundation. The paper derives sufficient condi- tions which...... ensure that the objective functions of the households and the firms are finite even when various trends and stochastic volatility are included in a standard DSGE model. Based on these conditions we test the validity of the micro foundation in six DSGE models from the literature. The models of Justiniano...

Use of the recognition heuristic depends on the domain's recognition validity, not on the recognition validity of selected sets of objects.

Science.gov (United States)

Pohl, Rüdiger F; Michalkiewicz, Martha; Erdfelder, Edgar; Hilbig, Benjamin E

2017-07-01

According to the recognition-heuristic theory, decision makers solve paired comparisons in which one object is recognized and the other not by recognition alone, inferring that recognized objects have higher criterion values than unrecognized ones. However, success-and thus usefulness-of this heuristic depends on the validity of recognition as a cue, and adaptive decision making, in turn, requires that decision makers are sensitive to it. To this end, decision makers could base their evaluation of the recognition validity either on the selected set of objects (the set's recognition validity), or on the underlying domain from which the objects were drawn (the domain's recognition validity). In two experiments, we manipulated the recognition validity both in the selected set of objects and between domains from which the sets were drawn. The results clearly show that use of the recognition heuristic depends on the domain's recognition validity, not on the set's recognition validity. In other words, participants treat all sets as roughly representative of the underlying domain and adjust their decision strategy adaptively (only) with respect to the more general environment rather than the specific items they are faced with.

Generalized algebra-valued models of set theory

NARCIS (Netherlands)

Löwe, B.; Tarafder, S.

2015-01-01

We generalize the construction of lattice-valued models of set theory due to Takeuti, Titani, Kozawa and Ozawa to a wider class of algebras and show that this yields a model of a paraconsistent logic that validates all axioms of the negation-free fragment of Zermelo-Fraenkel set theory.

Suitability of faecal near-infrared reflectance spectroscopy (NIRS) predictions for estimating gross calorific value

Energy Technology Data Exchange (ETDEWEB)

De la Roza-Delgado, B.; Modroño, S.; Vicente, F.; Martínez-Fernández, A.; Soldado, A.

2015-07-01

A total of 220 faecal pig and poultry samples, collected from different experimental trials were employed with the aim to demonstrate the suitability of Near Infrared Reflectance Spectroscopy (NIRS) technology for estimation of gross calorific value on faeces as output products in energy balances studies. NIR spectra from dried and grounded faeces samples were analyzed using a Foss NIRSystem 6500 instrument, scanning over the wavelength range 400-2500 nm. Validation studies for quantitative analytical models were carried out to estimate the relevance of method performance associated to reference values to obtain an appropriate, accuracy and precision. The results for prediction of gross calorific value (GCV) of NIRS calibrations obtained for individual species showed high correlation coefficients comparing chemical analysis and NIRS predictions, ranged from 0.92 to 0.97 for poultry and pig. For external validation, the ratio between the standard error of cross validation (SECV) and the standard error of prediction (SEP) varied between 0.73 and 0.86 for poultry and pig respectively, indicating a sufficiently precision of calibrations. In addition a global model to estimate GCV in both species was developed and externally validated. It showed correlation coefficients of 0.99 for calibration, 0.98 for cross-validation and 0.97 for external validation. Finally, relative uncertainty was calculated for NIRS developed prediction models with the final value when applying individual NIRS species model of 1.3% and 1.5% for NIRS global prediction. This study suggests that NIRS is a suitable and accurate method for the determination of GCV in faeces, decreasing cost, timeless and for convenient handling of unpleasant samples.. (Author)

PSYCHOMETRIC ANALYSIS OF TWO ANALOGOUS VALUE ASSESSMENT TOOLS: «TERMINAL VALUES QUESTIONNAIRE» BY I.G. SENIN AND «AXIOLOGICAL ORIENTATION OF THE PERSONALITY» QUESTIONNAIRE BY A.V. KAPTSOV & L.V. KARPUSHINA

Directory of Open Access Journals (Sweden)

Aleksey Yur’evich Kalugin

2015-03-01

Full Text Available The increase in the number of psychodiagnostic methods, aimed at the study of the value-semantic sphere confronts researchers with the task of selecting the most reliable and valid instruments. We set the task to conduct psychometric studies of two analogous tools that measure axiological sphere of personality: «Terminal values questionnaire» by I.G. Senin, «Axiological orientation of the personality» test by A.V. Kaptsov & L.V. Karpushina. Scales were checked for internal consistency, and construct validity of questionnaires was studied in greater detail. We offer an approach to the study of construct validity through comparing empirically obtained constructs with theoretical constructs on the basis of objective indicators of interrelations between them.

CO2-emission trading and green markets for renewable electricity. WILMAR - deliverable 4.1

International Nuclear Information System (INIS)

Azuma-Dicke, N.; Weber, C.; Morthorst, P.E.; Ravn, H.F.; Schmidt, R.

2004-06-01

This report is Deliverable 4.1 of the EU project 'Wind Power Integration in Liberalised Electricity Markets' (WILMAR) and de-scribes the application of two policy instruments, Tradable Emissions Permits (TEPs) and Tradable Green Certificates (TGCs) for electricity produced from renewable energy sources in the European Union and the implications for implementation in the Wilmar model. The introduction of a common emission-trading system in the EU is expected to have an upward effect on the spot prices at the electric-ity market. The variations of the spot price imply that some types of power generation may change the situation from earning money to losing money despite the increasing spot price. Heavy restrictions on emissions penalise the fossil-fuelled technologies significantly, and the associated increase in the spot price need not compensate for this. Therefore, a market of TEPs is expected to have a significant influence on the electricity spot price. However, the expected price level of TEPs are met with great uncertainty and a study of a number of economical studies shows a price span between zero and 270 USD per ton of CO 2 depending on the participation or non-participation of countries in the scheme. The price-determination at the TGC market is expected to be closely related to the price at the power spot market as the RE-producers of electricity will have expectations to the total price paid for the energy produced, i.e., for the price of electricity at the spot market plus the price per kWh obtained at the green certificate mar-ket. In the Wilmar model, the TGC market can either be handled exogenously, i.e., the increase in renewable capacity and an average annual TGC price are determined outside the model, or a simple TGC module is developed, including the long-term supply functions for the most relevant renewable technologies and an overall TGC quota. Both solutions are rather simple, but to develop a more advanced model for the TGC market seems to be

Diabetes ongoing sustainable care and treatment (DOST: A strategy for informational deliverance through visual dynamic modules sustained by near peer mentoring

Directory of Open Access Journals (Sweden)

Ankur Joshi

2016-01-01

Full Text Available Background: The informational continuity for a diabetic patient is of paramount importance. This study on a pilot basis explores the process utility of structured educational modular sessions grounded on the principle of near-peer mentoring. Methodology: Visual modules were prepared for diabetic patients. These modules were instituted to 25 diabetic patients in logical sequences. In the next phase, 4 persons of these 25 patients were designated as diabetic-diabetes ongoing sustainable care and treatment (DOST. Each diabetic-DOST was clubbed with two patients for modular session and informational deliverance during the next 7 days. Process analysis was performed with “proxy-indicators,” namely, monthly glycemic status, knowledge assessment scores, and quality of life. Data were analyzed by interval estimates and through nonparametric analysis. Results: Nonparametric analysis indicated a significant improvement in glycemic status in terms with fasting blood sugar (W = 78 z = 3.04, P = 0.002, 2 h-postprandial blood sugar (W = 54, z = 2.01, P = 0.035, and in knowledge score (c2 = 19.53, df = 3; P = 0.0002. Quality of life score showed significant improvement in 2 out of 7 domains, namely, satisfaction with treatment ([difference in mean score = 1.40 [1.94 to 0.85] and symptom botherness (difference in mean score = 0.98 [1.3–0.65]. Conclusion: Because of inherent methodological limitations and innate biases, at this juncture no conclusive statement can be drawn. Although, primitive process evidences indicate the promising role of the diabetic-DOST strategy.

Testing relationships between values and food-related lifestyle:

DEFF Research Database (Denmark)

Brunsø, Karen; Scholderer, Joachim; Grunert, Klaus G.

2004-01-01

The value survey developed by Shalom Schwartz (1992) has been applied in many countries with different purposes. In this study we present a new way of analysing the theoretically assumed circumplex structure of Schwartz value survey and its relationships to other constructs, here the instrument...... food-related lifestyle. In two countries; Germany and Spain, data were collected. In each country 1000 interviews were carried out where consumers were asked about their value priorities and about their food-related lifestyle. The study provides new insights into the way values influence peoples' food......-related lifestyle in Germany and Spain, and the results validate both the Schwartz value survey and the food-related lifestyle instrument in a nomological sense, since significant and meaningful relationships were found between the two constructs....

Chinese adaptation and validation of the patellofemoral pain severity scale.

Science.gov (United States)

Cheung, Roy T H; Ngai, Shirley P C; Lam, Priscillia L; Chiu, Joseph K W; Fung, Eric Y H

2013-05-01

This study validated the Patellofemoral Pain Severity Scale translated into Chinese. The Chinese Patellofemoral Pain Severity Scale was translated from the original English version following standard forward and backward translation procedures recommended by the International Society for Pharmacoeconomics and Outcomes Research. The survey was then conducted in clinical settings by a questionnaire comprising the Chinese Patellofemoral Pain Severity Scale, Kujala Scale and Western Ontario and McMaster Universities (WOMAC) Osteoarthritis Index. Eighty-four Chinese reading patients with patellofemoral pain were recruited from physical therapy clinics. Internal consistency of the translated instrument was measured by Cronbach alpha. Convergent validity was examined by Spearman rank correlation coefficient (rho) tests by comparing its score with the validated Chinese version of the Kujala Scale and the WOMAC Osteoarthritis Index while the test-retest reliability was evaluated by administering the questionnaires twice. Cronbach alpha values of individual questions and their overall value were above 0.85. Strong association was found between the Chinese Patellofemoral Pain Severity Scale and the Kujala Scale (rho = -0.72, p coefficient = 0.98) was demonstrated. The Chinese translated version of the Patellofemoral Pain Severity Scale is a reliable and valid instrument for patients with patellofemoral pain.

Applying the Expectancy-Value Model to understand health values.

Science.gov (United States)

Zhang, Xu-Hao; Xie, Feng; Wee, Hwee-Lin; Thumboo, Julian; Li, Shu-Chuen

2008-03-01

% and 28% in separate MLR models (P values became small and explanatory power of EVM was reduced to a range between 8% and 23%. EVM was useful in explaining variances of health values and predicting important factors. Its power to explain small variances might be restricted due to limitations of 7-point Likert scale to measure AAs accurately. With further improvement and validation of a compatible continuous scale for more accurate measurement, EVM is expected to explain health values to a larger extent.

Human rights – local value or universal norm?

Directory of Open Access Journals (Sweden)

Grigory Gutner

2011-03-01

Full Text Available The article argues for the universal character of human rights. It is demonstrated that they are not of specific value of Western culture but are a universal norm. This norm is valid not only for political practices but, first of all, for the morality and practice of argumentation. Human rights are strictly correlated with Kantian Categorical Imperative and can be substantiated by means of transcendental­pragmatic argument (K.­O. Apel. The difference between values and norms are also considered. It is demonstrated that values are always subjective and arbitrary meanwhile final justification is possible for norms.  

An Evaluation Framework for Lossy Compression of Genome Sequencing Quality Values.

Science.gov (United States)

Alberti, Claudio; Daniels, Noah; Hernaez, Mikel; Voges, Jan; Goldfeder, Rachel L; Hernandez-Lopez, Ana A; Mattavelli, Marco; Berger, Bonnie

2016-01-01

This paper provides the specification and an initial validation of an evaluation framework for the comparison of lossy compressors of genome sequencing quality values. The goal is to define reference data, test sets, tools and metrics that shall be used to evaluate the impact of lossy compression of quality values on human genome variant calling. The functionality of the framework is validated referring to two state-of-the-art genomic compressors. This work has been spurred by the current activity within the ISO/IEC SC29/WG11 technical committee (a.k.a. MPEG), which is investigating the possibility of starting a standardization activity for genomic information representation.

THE ANALYSIS OF ORGANIZATIONAL CULTURE VALUES IN PUBLIC SECTORS IN LATVIA

OpenAIRE

Ivanova, Maija; Kokina, Irēna

2016-01-01

Organizational culture is an important issue because of its` big influence on enterprises’ productivity and consequently on realization of their objectives and goals. The validation and harmonization of organizational values and employees’ values has an important role in increasing operational efficiency. It has long been established that enterprises and organizations, where creative and interested employees who support and understand the organizational values of the company wo...

Validity and reliability of a method for assessment of cervical vertebral maturation.

Science.gov (United States)

Zhao, Xiao-Guang; Lin, Jiuxiang; Jiang, Jiu-Hui; Wang, Qingzhu; Ng, Sut Hong

2012-03-01

To evaluate the validity and reliability of the cervical vertebral maturation (CVM) method with a longitudinal sample. Eighty-six cephalograms from 18 subjects (5 males and 13 females) were selected from the longitudinal database. Total mandibular length was measured on each film; an increased rate served as the gold standard in examination of the validity of the CVM method. Eleven orthodontists, after receiving intensive training in the CVM method, evaluated all films twice. Kendall's W and the weighted kappa statistic were employed. Kendall's W values were higher than 0.8 at both times, indicating strong interobserver reproducibility, but interobserver agreement was documented twice at less than 50%. A wide range of intraobserver agreement was noted (40.7%-79.1%), and substantial intraobserver reproducibility was proved by kappa values (0.53-0.86). With regard to validity, moderate agreement was reported between the gold standard and observer staging at the initial time (kappa values 0.44-0.61). However, agreement seemed to be unacceptable for clinical use, especially in cervical stage 3 (26.8%). Even though the validity and reliability of the CVM method proved statistically acceptable, we suggest that many other growth indicators should be taken into consideration in evaluating adolescent skeletal maturation.

Likelihood ratio data to report the validation of a forensic fingerprint evaluation method

Directory of Open Access Journals (Sweden)

Daniel Ramos

2017-02-01

Full Text Available Data to which the authors refer to throughout this article are likelihood ratios (LR computed from the comparison of 5–12 minutiae fingermarks with fingerprints. These LRs data are used for the validation of a likelihood ratio (LR method in forensic evidence evaluation. These data present a necessary asset for conducting validation experiments when validating LR methods used in forensic evidence evaluation and set up validation reports. These data can be also used as a baseline for comparing the fingermark evidence in the same minutiae configuration as presented in (D. Meuwly, D. Ramos, R. Haraksim, [1], although the reader should keep in mind that different feature extraction algorithms and different AFIS systems used may produce different LRs values. Moreover, these data may serve as a reproducibility exercise, in order to train the generation of validation reports of forensic methods, according to [1]. Alongside the data, a justification and motivation for the use of methods is given. These methods calculate LRs from the fingerprint/mark data and are subject to a validation procedure. The choice of using real forensic fingerprint in the validation and simulated data in the development is described and justified. Validation criteria are set for the purpose of validation of the LR methods, which are used to calculate the LR values from the data and the validation report. For privacy and data protection reasons, the original fingerprint/mark images cannot be shared. But these images do not constitute the core data for the validation, contrarily to the LRs that are shared.

Experimental validation of GASDECOM for High Heating Value Processed Gas mixtures (58 MJ/m3) by specialized shock tube

International Nuclear Information System (INIS)

Botros, K.K.; Geerligs, J.; Carlson, L.; Reed, M.

2013-01-01

One of the fundamental requirements of the design of pipelines is the control of propagating ductile fracture, in which the Battelle two-curve method still forms the basis of the analytical framework used throughout the industry. The GASDECOM (GAS DECOMpression) tool is typically used for calculating decompression wave speed, which is one of these two curves. It uses the BWRS (Benedict–Webb–Rubin–Starling) equation of state to idealize the decompression process as isentropic and one-dimensional. While this equation of state was developed and validated against a quite restricted range of gas compositions, GASDECOM continues to perform relatively well for compositions slightly outside the original range of BWRS. The present research was focused on examining the performance of GASDECOM for mixture compositions up to a High (gross) Heating Value (HHV) of 58 MJ/m 3 . Four tests were conducted using a specialized high pressure shock tube (42 m long, I.D. = 38.1 mm) to experimentally determine the decompression wave speeds and compare them to the predictions by GASDECOM. Two tests were conducted on a gas mixture of HHV = 52 MJ/m 3 and the other two on even richer gas mixture of HHV = 58 MJ/m 3 , all were from nominal initial pressures of 15 MPa and initial temperatures of 40 °C. The results from these tests show that decompression wave speeds are consistent with predictions of GASDECOM for gases of HHV typical of the previously validated range of BWRS. Predictions of the saturation pressure represented by the plateau pressure in the decompression wave speed curve were also in good agreement with measurements despite the fact that they occurred close to the critical point of the respective mixture compositions. -- Highlights: • Performance of GASDECOM for mixture up to HHV of 58 MJ/m3 was examined. • Experiments were conducted using a specialized high pressure shock. • Results show that decompression speeds are consistent with predictions of GASDECOM. �

Value-based metrics and Internet-based enterprises

Science.gov (United States)

Gupta, Krishan M.

2001-10-01

Within the last few years, a host of value-based metrics like EVA, MVA, TBR, CFORI, and TSR have evolved. This paper attempts to analyze the validity and applicability of EVA and Balanced Scorecard for Internet based organizations. Despite the collapse of the dot-com model, the firms engaged in e- commerce continue to struggle to find new ways to account for customer-base, technology, employees, knowledge, etc, as part of the value of the firm. While some metrics, like the Balance Scorecard are geared towards internal use, others like EVA are for external use. Value-based metrics are used for performing internal audits as well as comparing firms against one another; and can also be effectively utilized by individuals outside the firm looking to determine if the firm is creating value for its stakeholders.

Relationships Between Service Personal Values, Service Value, Satisfaction, and Loyalty: A Study Regarding Services of Private and State Hospitals in Turkey

Directory of Open Access Journals (Sweden)

Metin Argan

2017-06-01

Full Text Available Service and value are the two inseparable concepts in experiential service environment. Service personal value is a concept that is subjectively assessed from a consumer perspective, and is associated with service value, consumer satisfaction and loyalty. In this context, the purpose of this study was to examine the relationships between services personal values, service value, satisfaction, and loyalty. Data were collected from persons (996 receiving services from private hospitals and state hospitals using convenience sampling method. The scales of service personal values, service value, satisfaction and loyalty were adapted from literature. Confirmatory factor analysis (CFA was used to investigate validity and reliability of the scales. Then, a structural equation model (SEM was developed and tested using data with Lisrel 8.80 software. The results of the study indicate significant relationships between services personal values, service value, satisfaction, and loyalty. The results of the study have significant implications as to how well private hospital managers design strategies of health service, satisfaction, and loyalty.

Psychometric Validation of the BODY-Q in Danish Patients Undergoing Weight Loss and Body Contouring Surgery

DEFF Research Database (Denmark)

Poulsen, Lotte; Klassen, Anne; Rose, Michael

2017-01-01

study aims to psychometrically validate the BODY-Q for use in Danish patients. Methods: The process consisted of 3 stages: translation and linguistic validation, field-test, and data analysis. The translation was performed in accordance with the International Society for Pharmacoeconomics and Outcomes...... assessments with an overall response rate at 76%. Cronbach α values were ≥ 0.90, and person separation index values were in general high. The Rasch Measurement Theory analysis provided broad support for the reliability and validity of the Danish version of the BODY-Q scales. Item fit was outside the criteria...... for 34 of 138 items, and of these, 21 had a significant chi-square P value after Bonferroni adjustment. Most items (128 of 138) had ordered thresholds, indicating that response options worked as intended. Conclusion: The Danish version of the BODY-Q is a reliable and valid patient-reported outcome...

ATRIUM™ 11 – Validation of performanceand value for BWR operations

Energy Technology Data Exchange (ETDEWEB)

Colet, S.; Garner, N.L.; Graebert, R.; Koch, R.; Mollard, P.

2015-07-01

AREVA’s ATRIUM™ 11 advanced fuel design for Boiling Water Reactors (BWRs) is the result of a product development program designed to realize a strict set of performance and reliability objectives complying with the industry market demand. The validation of ATRIUM™ 11 performance is given by the now completed out of pile thermal hydraulic and mechanical tests, the results of poolside examinations of initiated lead fuel assembly programs as well as the results of fuel cycle analyses taking benefit of enhanced fuel reliability and operational flexibility. The coming three years will complete the in-service qualification program leading to the anticipated reload deliveries in Europe in 2018 and leading to reload readiness in the US in 2019. The ATRIUM™ 11 Lead Fuel Assembly program is running in Europe since 2012 and in the USA since 2015 and the first irradiation experience data give as-expected results in term of mechanical and thermal-mechanical behavior as well as levels of corrosion. The large gains in term of fuel cycle economy by switching from 10x10 fuel to ATRIUM™ 11 fuel are illustrated specifically for a 1300 MWe US type reactor featuring a symmetric lattice and operated on a 24 month basis. The analytical tools necessary to support cycle design and licensing were initiated in parallel with the product development and, where required by regulatory authorities, submitted for review in time to allow for approval in parallel with the completion of the in-service qualification program. (Author)

Automatic validation of numerical solutions

DEFF Research Database (Denmark)

Stauning, Ole

1997-01-01

This thesis is concerned with ``Automatic Validation of Numerical Solutions''. The basic theory of interval analysis and self-validating methods is introduced. The mean value enclosure is applied to discrete mappings for obtaining narrow enclosures of the iterates when applying these mappings...... differential equations, but in this thesis, we describe how to use the methods for enclosing iterates of discrete mappings, and then later use them for discretizing solutions of ordinary differential equations. The theory of automatic differentiation is introduced, and three methods for obtaining derivatives...... are described: The forward, the backward, and the Taylor expansion methods. The three methods have been implemented in the C++ program packages FADBAD/TADIFF. Some examples showing how to use the three metho ds are presented. A feature of FADBAD/TADIFF not present in other automatic differentiation packages...

The interplay between value and service quality experience: e-loyalty development process through the eTailQ scale and value perception

OpenAIRE

Li, Honglei; Aham-Anyanwu, Nnanyelugo; Tevrizci, Cemal; Luo, Xin

2015-01-01

This research aims to investigate the process and factors relevant for developing customer e-loyalty from an e-service quality experience perspective. Based on previously published loyalty studies and e-commerce literature, an integrated model of e-loyalty development process is proposed by including and validating value perception and the e-service quality scale eTailQ scale. The eTailQ scale consists of website design, security/privacy, value perception, reliability and customer support and...

Validation of behaviour measurement instrument of patients with diabetes mellitus and hypertension

Science.gov (United States)

Saputri, G. Z.; Akrom; Dini, S. M.

2017-11-01

Non-adherence to the treatment of chronic diseases such as hypertension and Diabetes Mellitus (DM) is a major obstacle in achieving patient therapy targets and quality of life of patients. A comprehensive approach involving pharmacists counselling has shown influences on changes in health behaviour and patient compliance. Behaviour changes in patients are one of the parameters to assess the effectiveness of counselling and education by pharmacists. Therefore, it is necessary to develop questionnaires of behaviour change measurement in DM-hypertension patients. This study aims to develop a measurement instrument in the form of questionnaires in assessing the behaviour change of DM-hypertension patients. Preparation of question items from the questionnaire research instrument refers to some guidelines and previous research references. Test of questionnaire instrument valid was done with expert validation, followed by pilot testing on 10 healthy respondents, and 10 DM-hypertension patients included in the inclusion criteria. Furthermore, field validation test was conducted on 37 patients who had undergone outpatient care at the PKU Muhammadiyah Yogyakarta City Hospital and The Gading Clinic in Yogyakarta. The inclusion criteria were male and female patients, aged 18-65, diagnosed with type 2 diabetes with hypertension who received oral antidiabetic drugs and antihypertensives, and who were not illiterate and co-operative. The data were collected by questionnaire interviews by a standardized pharmacist. The result of validation test using Person correlation shows the value of 0.33. The results of the questionnaire validation test on 37 patients showed 5 items of invalid questions with the value of r 0.33. The reliability value is shown from the Cronbach's alpha value of 0.722 (> 0.6), implying that the questionnaire is reliable for DM-hypertension patients. This Behavioural change questionnaire can be used on DM-hypertension patients, and an FGD approach is required

Methods for Geometric Data Validation of 3d City Models

Science.gov (United States)

Wagner, D.; Alam, N.; Wewetzer, M.; Pries, M.; Coors, V.

2015-12-01

Geometric quality of 3D city models is crucial for data analysis and simulation tasks, which are part of modern applications of the data (e.g. potential heating energy consumption of city quarters, solar potential, etc.). Geometric quality in these contexts is however a different concept as it is for 2D maps. In the latter case, aspects such as positional or temporal accuracy and correctness represent typical quality metrics of the data. They are defined in ISO 19157 and should be mentioned as part of the metadata. 3D data has a far wider range of aspects which influence their quality, plus the idea of quality itself is application dependent. Thus, concepts for definition of quality are needed, including methods to validate these definitions. Quality on this sense means internal validation and detection of inconsistent or wrong geometry according to a predefined set of rules. A useful starting point would be to have correct geometry in accordance with ISO 19107. A valid solid should consist of planar faces which touch their neighbours exclusively in defined corner points and edges. No gaps between them are allowed, and the whole feature must be 2-manifold. In this paper, we present methods to validate common geometric requirements for building geometry. Different checks based on several algorithms have been implemented to validate a set of rules derived from the solid definition mentioned above (e.g. water tightness of the solid or planarity of its polygons), as they were developed for the software tool CityDoctor. The method of each check is specified, with a special focus on the discussion of tolerance values where they are necessary. The checks include polygon level checks to validate the correctness of each polygon, i.e. closeness of the bounding linear ring and planarity. On the solid level, which is only validated if the polygons have passed validation, correct polygon orientation is checked, after self-intersections outside of defined corner points and edges

Validation of a virtual reality-based simulator for shoulder arthroscopy.

Science.gov (United States)

Rahm, Stefan; Germann, Marco; Hingsammer, Andreas; Wieser, Karl; Gerber, Christian

2016-05-01

This study was to determine face and construct validity of a new virtual reality-based shoulder arthroscopy simulator which uses passive haptic feedback. Fifty-one participants including 25 novices (100 shoulder arthroscopies) completed two tests: for assessment of face validity, a questionnaire was filled out concerning quality of simulated reality and training potential using a 7-point Likert scale (range 1-7). Construct validity was tested by comparing simulator metrics (operation time in seconds, camera and grasper pathway in centimetre and grasper openings) between novices and experts test results. Overall simulated reality was rated high with a median value of 5.5 (range 2.8-7) points. Training capacity scored a median value of 5.8 (range 3-7) points. Experts were significantly faster in the diagnostic test with a median of 91 (range 37-208) s than novices with 1177 (range 81-383) s (p < 0.0001) and in the therapeutic test 102 (range 58-283) s versus 229 (range 114-399) s (p < 0.0001). Similar results were seen in the other metric values except in the camera pathway in the therapeutic test. The tested simulator achieved high scores in terms of realism and training capability. It reliably discriminated between novices and experts. Further improvements of the simulator, especially in the field of therapeutic arthroscopy, might improve its value as training and assessment tool for shoulder arthroscopy skills. II.

Acceptance Probability (P a) Analysis for Process Validation Lifecycle Stages.

Science.gov (United States)

Alsmeyer, Daniel; Pazhayattil, Ajay; Chen, Shu; Munaretto, Francesco; Hye, Maksuda; Sanghvi, Pradeep

2016-04-01

This paper introduces an innovative statistical approach towards understanding how variation impacts the acceptance criteria of quality attributes. Because of more complex stage-wise acceptance criteria, traditional process capability measures are inadequate for general application in the pharmaceutical industry. The probability of acceptance concept provides a clear measure, derived from specific acceptance criteria for each quality attribute. In line with the 2011 FDA Guidance, this approach systematically evaluates data and scientifically establishes evidence that a process is capable of consistently delivering quality product. The probability of acceptance provides a direct and readily understandable indication of product risk. As with traditional capability indices, the acceptance probability approach assumes that underlying data distributions are normal. The computational solutions for dosage uniformity and dissolution acceptance criteria are readily applicable. For dosage uniformity, the expected AV range may be determined using the s lo and s hi values along with the worst case estimates of the mean. This approach permits a risk-based assessment of future batch performance of the critical quality attributes. The concept is also readily applicable to sterile/non sterile liquid dose products. Quality attributes such as deliverable volume and assay per spray have stage-wise acceptance that can be converted into an acceptance probability. Accepted statistical guidelines indicate processes with C pk > 1.33 as performing well within statistical control and those with C pk  1.33 is associated with a centered process that will statistically produce less than 63 defective units per million. This is equivalent to an acceptance probability of >99.99%.

Doppler lidar mounted on a wind turbine nacelle - UPWIND deliverable D6.7.1

Energy Technology Data Exchange (ETDEWEB)

Angelou, N.; Mann, J.; Courtney, M.; Sjoeholm, M.

2010-12-15

A ZephIR prototype wind lidar manufactured by QinetiQ was mounted on the nacelle of a Vestas V27 wind turbine and measurements of the incoming wind flow towards the rotor of the wind turbine were acquired for approximately 3 months (April - June 2009). The objective of this experiment was the investigation of the turbulence attenuation induced in the lidar measurements. In this report are presented results from data analysis over a 21-hour period (2009-05-05 12:00 - 2009-05-06 09:00). During this period the wind turbine was not operating and the line-of-sight of the lidar was aligned with the wind direction. The analysis included a correlation study between the ZephIR lidar and a METEK sonic anemometer. The correlation analysis was performed using both 10 minutes and 10 Hz wind speed values. The spectral transfer function which describes the turbulence attenuation, which is induced in the lidar measurements, was estimated by means of spectral analysis. An attempt to increase the resolution of the wind speed measurements of a cw lidar was performed, through the deconvolution of the lidar signal. A theoretical model of such a procedure is presented in this report. A simulation has validated the capability of the algorithm to deconvolve and consequently increase the resolution of the lidar system. However the proposed method was not efficient when applied to real lidar wind speed measurements, probably due to the effect, that the wind direction fluctuations along the lidar's line-of-sight have, on the lidar measurements. (Author)

An empirical analysis of online gamers' perceptions of game items: modified theory of consumption values approach.

Science.gov (United States)

Park, Bong-Won; Lee, Kun Chang

2011-01-01

The aims of this article are (1) to propose a modified theory of consumption values (MTCV) for investigation of online gamer perceptions of the value of purchasable game items and (2) to apply the developed MTCV to multiple game genres and player age groups. To address these aims, 327 valid questionnaires were obtained and analyzed. The original theory of consumption values (TCV) was modified to apply to the specific characteristics of online games. The original TCV specifies five types of consumption values: functional value, social value, emotional value, conditional value, and epistemic value. After revising the TCV to apply to the examination of online games, we proposed that the MTCV be composed of character competency value, enjoyment value, visual authority value, and monetary value. The validity of the MTCV was proven by statistically analyzing the responses provided by the 327 valid questionnaires. To examine the second aim, experiments were conducted to examine the MTCV in three online game genres-massive multiplayer online role-playing games, first-person shooters games, and casual games. The second aim was also studied via questionnaires that examined the ages of online gamers. It was determined that massive multiplayer online role-playing games players regard visual authority value and monetary value as more important than do casual gamers. It was also determined that younger gamers tend to be more interested in visual authority, whereas older gamers tend to be more interested in character competency. This research provides a foundation for future studies to extend the MTCV to consider other user factors, such as cultural effects.

Validation of intensive care unit-acquired infection surveillance in the Italian SPIN-UTI network.

Science.gov (United States)

Masia, M D; Barchitta, M; Liperi, G; Cantù, A P; Alliata, E; Auxilia, F; Torregrossa, V; Mura, I; Agodi, A

2010-10-01

Validity is one of the most critical factors concerning surveillance of nosocomial infections (NIs). This article describes the first validation study of the Italian Nosocomial Infections Surveillance in Intensive Care Units (ICUs) project (SPIN-UTI) surveillance data. The objective was to validate infection data and thus to determine the sensitivity, specificity, and positive and negative predictive values of NI data reported on patients in the ICUs participating in the SPIN-UTI network. A validation study was performed at the end of the surveillance period. All medical records including all clinical and laboratory data were reviewed retrospectively by the trained physicians of the validation team and a positive predictive value (PPV), a negative predictive value (NPV), sensitivity and specificity were calculated. Eight ICUs (16.3%) were randomly chosen from all 49 SPIN-UTI ICUs for the validation study. In total, the validation team reviewed 832 patient charts (27.3% of the SPIN-UTI patients). The PPV was 83.5% and the NPV was 97.3%. The overall sensitivity was 82.3% and overall specificity was 97.2%. Over- and under-reporting of NIs were related to misinterpretation of the case definitions and deviations from the protocol despite previous training and instructions. The results of this study are useful to identify methodological problems within a surveillance system and have been used to plan retraining for surveillance personnel and to design and implement the second phase of the SPIN-UTI project. Copyright 2010 The Hospital Infection Society. Published by Elsevier Ltd. All rights reserved.

Bioclim Deliverable D6b: application of statistical down-scaling within the BIOCLIM hierarchical strategy: methods, data requirements and underlying assumptions

International Nuclear Information System (INIS)

2004-01-01

The overall aim of BIOCLIM is to assess the possible long term impacts due to climate change on the safety of radioactive waste repositories in deep formations. The coarse spatial scale of the Earth-system Models of Intermediate Complexity (EMICs) used in BIOCLIM compared with the BIOCLIM study regions and the needs of performance assessment creates a need for down-scaling. Most of the developmental work on down-scaling methodologies undertaken by the international research community has focused on down-scaling from the general circulation model (GCM) scale (with a typical spatial resolution of 400 km by 400 km over Europe in the current generation of models) using dynamical down-scaling (i.e., regional climate models (RCMs), which typically have a spatial resolution of 50 km by 50 km for models whose domain covers the European region) or statistical methods (which can provide information at the point or station scale) in order to construct scenarios of anthropogenic climate change up to 2100. Dynamical down-scaling (with the MAR RCM) is used in BIOCLIM WP2 to down-scale from the GCM (i.e., IPSL C M4 D ) scale. In the original BIOCLIM description of work, it was proposed that UEA would apply statistical down-scaling to IPSL C M4 D output in WP2 as part of the hierarchical strategy. Statistical down-scaling requires the identification of statistical relationships between the observed large-scale and regional/local climate, which are then applied to large-scale GCM output, on the assumption that these relationships remain valid in the future (the assumption of stationarity). Thus it was proposed that UEA would investigate the extent to which it is possible to apply relationships between the present-day large-scale and regional/local climate to the relatively extreme conditions of the BIOCLIM WP2 snapshot simulations. Potential statistical down-scaling methodologies were identified from previous work performed at UEA. Appropriate station data from the case

Non-Linear Slosh Damping Model Development and Validation

Science.gov (United States)

Yang, H. Q.; West, Jeff

2015-01-01

Propellant tank slosh dynamics are typically represented by a mechanical model of spring mass damper. This mechanical model is then included in the equation of motion of the entire vehicle for Guidance, Navigation and Control (GN&C) analysis. For a partially-filled smooth wall propellant tank, the critical damping based on classical empirical correlation is as low as 0.05%. Due to this low value of damping, propellant slosh is potential sources of disturbance critical to the stability of launch and space vehicles. It is postulated that the commonly quoted slosh damping is valid only under the linear regime where the slosh amplitude is small. With the increase of slosh amplitude, the critical damping value should also increase. If this nonlinearity can be verified and validated, the slosh stability margin can be significantly improved, and the level of conservatism maintained in the GN&C analysis can be lessened. The purpose of this study is to explore and to quantify the dependence of slosh damping with slosh amplitude. Accurately predicting the extremely low damping value of a smooth wall tank is very challenging for any Computational Fluid Dynamics (CFD) tool. One must resolve thin boundary layers near the wall and limit numerical damping to minimum. This computational study demonstrates that with proper grid resolution, CFD can indeed accurately predict the low damping physics from smooth walls under the linear regime. Comparisons of extracted damping values with experimental data for different tank sizes show very good agreements. Numerical simulations confirm that slosh damping is indeed a function of slosh amplitude. When slosh amplitude is low, the damping ratio is essentially constant, which is consistent with the empirical correlation. Once the amplitude reaches a critical value, the damping ratio becomes a linearly increasing function of the slosh amplitude. A follow-on experiment validated the developed nonlinear damping relationship. This discovery can

The reliability and validity of multiple mini interviews (MMIs) in values based recruitment to nursing, midwifery and paramedic practice programmes: Findings from an evaluation study.

Science.gov (United States)

Callwood, Alison; Cooke, Debbie; Bolger, Sarah; Lemanska, Agnieszka; Allan, Helen

2018-01-01

Universities in the United Kingdom (UK) are required to incorporate values based recruitment (VBR) into their healthcare student selection processes. This reflects an international drive to strengthen the quality of healthcare service provision. This paper presents novel findings in relation to the reliability and predictive validity of multiple mini interviews (MMIs); one approach to VBR widely being employed by universities. To examine the reliability (internal consistency) and predictive validity of MMIs using end of Year One practice outcomes of under-graduate pre-registration adult, child, mental health nursing, midwifery and paramedic practice students. Cross-discipline evaluation study. One university in the United Kingdom. Data were collected in two streams: applicants to A) The September 2014 and 2015 Midwifery Studies programmes; B) September 2015 adult; Child and Mental Health Nursing and Paramedic Practice programmes. Fifty-seven midwifery students commenced their programme in 2014 and 69 in 2015; 47 and 54 agreed to participate and completed Year One respectively. 333 healthcare students commenced their programmes in September 2015. Of these, 281 agreed to participate and completed their first year (180 adult, 33 child and 34 mental health nursing and 34 paramedic practice students). Stream A featured a seven station four-minute model with one interviewer at each station and in Stream B a six station model was employed. Cronbach's alpha was used to assess MMI station internal consistency and Pearson's moment correlation co-efficient to explore associations between participants' admission MMI score and end of Year one clinical practice outcomes (OSCE and mentor grading). Stream A: Significant correlations are reported between midwifery applicant's MMI scores and end of Year One practice outcomes. A multivariate linear regression model demonstrated that MMI score significantly predicted end of Year One practice outcomes controlling for age and academic

Commentary: moving toward cost-effectiveness in using psychophysiological measures in clinical assessment: validity, decision making, and adding value.

Science.gov (United States)

Youngstrom, Eric A; De Los Reyes, Andres

2015-01-01

Psychophysiological measures offer a variety of potential advantages, including more direct assessment of certain processes, as well as provision of information that may contrast with other sources. The role of psychophysiological measures in clinical practice will be best defined when researchers (a) switch to research designs and statistical models that better approximate how clinicians administer assessments and make clinical decisions in practice, (b) systematically compare the validity of psychophysiological measures to incumbent methods for assessing similar criteria, (c) test whether psychophysiological measures show either greater validity or clinically meaningful incremental validity, and (d) factor in fiscal costs as well as the utilities that the client attaches to different assessment outcomes. The statistical methods are now readily available, along with the interpretive models for integrating assessment results into client-centered decision making. These, combined with technology reducing the cost of psychophysiological measurement and improving ease of interpretation, poise the field for a rapid transformation of assessment practice, but only if we let go of old habits of research.

Thermal hydraulics of accelerator driven system: validation and analysis

International Nuclear Information System (INIS)

Kumari, I.; Khanna, A.

2014-01-01

This paper presents validation of RELAP5/Mod4.0 code modified to incorporate Lead Bismuth Eutectic (LBE)fluid properties for simulation of Accelerator Driven System (ADS) against Barone's NACIE facility.Results of mass flow rates (MFR), Reynolds number, heat transfer coefficients, temperatures and temperature difference for three powers (10.8, 21.7 and 32.5 kW) under natural circulation of LBE match with Barone's values within 7%,18%,37%, 5% and 8% of relative error respectively. After this validation Indian ADS for thermal power of 15 kW has been simulated. Simulated profiles of temperature, MFR and pressure drop LBE and air are reported. Air and LBE temperatures of present work match with literature design values within 5% of relative error. (author)

Qualitative Validation of the IMM Model for ISS and STS Programs

Science.gov (United States)

Kerstman, E.; Walton, M.; Reyes, D.; Boley, L.; Saile, L.; Young, M.; Arellano, J.; Garcia, Y.; Myers, J. G.

2016-01-01

To validate and further improve the Integrated Medical Model (IMM), medical event data were obtained from 32 ISS and 122 STS person-missions. Using the crew characteristics from these observed missions, IMM v4.0 was used to forecast medical events and medical resource utilization. The IMM medical condition incidence values were compared to the actual observed medical event incidence values, and the IMM forecasted medical resource utilization was compared to actual observed medical resource utilization. Qualitative comparisons of these parameters were conducted for both the ISS and STS programs. The results of these analyses will provide validation of IMM v4.0 and reveal areas of the model requiring adjustments to improve the overall accuracy of IMM outputs. This validation effort should result in enhanced credibility of the IMM and improved confidence in the use of IMM as a decision support tool for human space flight.

The recreational value of river inflows into South African estuaries ...

African Journals Online (AJOL)

For the 37 estimates deemed reliable (but not necessarily valid), the average of the predicted median values of river inflow into estuaries was calculated to be 3.4 c/m3 (South African cents, ZAR) and standard deviation 3.84 c/m3. The average of the predicted mean values was calculated to be 7.4 c/m3 and the standard ...

Segmentation of culturally diverse visitors' values in forest recreation management

Science.gov (United States)

C. Li; H.C. Zinn; G.E. Chick; J.D. Absher; A.R. Graefe; Y. Hsu

2007-01-01

The purpose of this study was to examine the potential utility of HOFSTEDE’s measure of cultural values (1980) for group segmentation in an ethnically diverse population in a forest recreation context, and to validate the values segmentation, if any, via socio-demographic and service quality related variables. In 2002, the visitors to the Angeles National Forest (ANF)...

Ranking Exponential Trapezoidal Fuzzy Numbers by Median Value

Directory of Open Access Journals (Sweden)

S. Rezvani

2013-12-01

Full Text Available In this paper, we want represented a method for ranking of two exponential trapezoidal fuzzy numbers. A median value is proposed for the ranking of exponential trapezoidal fuzzy numbers. For the validation the results of the proposed approach are compared with different existing approaches.

Measuring the value of intangibles

DEFF Research Database (Denmark)

Clausen, Saskia; Hirth, Stefan

2016-01-01

We propose a new earnings-based measure for the value of intangibles. To validate this measure, we compare it to commonly used proxies for intangible intensity, such as R&D expenses. While R&D expenses measure the investment in new intangibles, our new measure gauges the productivity of already e...... of our intangible-intensity measure in the context of capital structure. We find that more intangible-intensive firms have lower leverage. © 2016 Elsevier B.V....

SU-E-T-106: Development of a Collision Prediction Algorithm for Determining Problematic Geometry for SBRT Treatments Using a Stereotactic Body Frame

Energy Technology Data Exchange (ETDEWEB)

Wagar, M; Friesen, S; Mannarino, E [Dana-Farber/Brigham and Women' s Cancer Center, Boston, MA (United States); Hacker, F [Dana-Farber/Brigham and Women' s Cancer Center, Boston, MA (United States); Harvard Medical School, Boston, MA (United States)

2014-06-01

Purpose: Collision between the gantry and the couch or patient during Radiotherapy is not a common concern for conventional RT (static fields or arc). With the increase in the application of stereotactic planning techniques to the body, collisions have become a greater concern. Non-coplanar beam geometry is desirable in stereotatic treatments in order to achieve sharp gradients and a high conformality. Non-coplanar geometry is less intuitive in the body and often requires an iterative process of planning and dry runs to guarantee deliverability. Methods: Purpose written software was developed in order to predict the likelihood of collision between the head of the gantry and the couch, patient or stereotatic body frame. Using the DICOM plan and structures set, exported by the treatment planning system, this software is able to predict the possibility of a collision. Given the plan's isocenter, treatment geometry and exterior contours, the software is able to determine if a particular beam/arc is clinically deliverable or if collision is imminent. Results: The software was tested on real world treatment plans with untreatable beam geometry. Both static non-coplanar and VMAT plans were tested. Of these, the collision prediction software could identify all as having potentially problematic geometry. Re-plans of the same cases were also tested and validated as deliverable. Conclusion: This software is capable of giving good initial indication of deliverability for treatment plans that utilize complex geometry (SBRT) or have lateral isocenters. This software is not intended to replace the standard pre-treatment QA dry run. The effectiveness is limited to those portions of the patient and immobilization devices that have been included in the simulation CT and contoured in the planning system. It will however aid the planner in reducing the iterations required to create complex treatment geometries necessary to achieve ideal conformality and organ sparing.

Development of a corrosion detection experiment to evaluate conventional and advanced NDI techniques

Energy Technology Data Exchange (ETDEWEB)

Roach, D.

1995-12-31

The Aging Aircraft NDI Validation Center (AANC) was established by the Federal Aviation Administration Technical Center (FAATC) at Sandia National Laboratories in August of 1991. The goal of the AANC is to provide independent validation of technologies intended to enhance the structural inspection of aging commuter and transport aircraft. The deliverables from the AANC`s validation activities are assessments of the reliability of existing and emerging inspection technologies as well as analyses of the cost benefits to be derived from their implementation. This paper describes the methodology developed by the AANC to assess the performance of NDI techniques. In particular, an experiment being developed to evaluate corrosion detection devices will be presented. The experiment uses engineered test specimens, as well as complete aircraft test beds to provide metrics for NDI validation.

Anoxic and aerobic values for the yield coefficient of the ...

African Journals Online (AJOL)

2008-04-15

Apr 15, 2008 ... Simulations with dual values (aerobic and anoxic conditions) for heterotrophic yield (modified ... mittently aerated processes can achieve a significant nitrate ...... dynamic calibration and long-term validation for an intermittently.

Assessing choice making among children with multiple disabilities.

OpenAIRE

Sigafoos, J; Dempsey, R

1992-01-01

Some learners with multiple disabilities display idiosyncratic gestures that are interpreted as a means of making choices. In the present study, we assessed the validity of idiosyncratic choice-making behaviors of 3 children with multiple disabilities. Opportunities for each child to choose between food and drink were provided under two conditions. In one condition, the children were given the food or drink item corresponding to their prior choice. In the other condition, the teacher delivere...

Technical Leadership Development Program-Year 3

Science.gov (United States)

2012-08-30

be subject to a penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. 1. REPORT...NASA6, Nokia , BAE Systems, the DoD, and the Australian government to develop our initial competency model. These models were discussed in deliverable...UNCLASSIFIED 17 solutions to pursue and why they should be built. 2. Help teams solve technical problems holistically, overcoming technical and non

Validation of Inhibition Effect in the Cellulose Hydrolysis: a Dynamic Modelling Approach

DEFF Research Database (Denmark)

Morales Rodriguez, Ricardo; Tsai, Chien-Tai; Meyer, Anne S.

2011-01-01

Enzymatic hydrolysis is one of the main steps in the processing of bioethanol from lignocellulosic raw materials. However, complete understanding of the underlying phenomena is still under development. Hence, this study has focused on validation of the inhibition effects in the cellulosic biomass...... for parameter estimation (calibration) and validation purposes. The model predictions using calibrated parameters have shown good agreement with the validation data sets, which provides credibility to the model structure and the parameter values....

Validation of asthma recording in electronic health records: a systematic review

Directory of Open Access Journals (Sweden)

Nissen F

2017-12-01

Full Text Available Francis Nissen,1 Jennifer K Quint,2 Samantha Wilkinson,1 Hana Mullerova,3 Liam Smeeth,1 Ian J Douglas1 1Department of Non-Communicable Disease Epidemiology, London School of Hygiene and Tropical Medicine, London, UK; 2National Heart and Lung Institute, Imperial College, London, UK; 3RWD & Epidemiology, GSK R&D, Uxbridge, UK Objective: To describe the methods used to validate asthma diagnoses in electronic health records and summarize the results of the validation studies. Background: Electronic health records are increasingly being used for research on asthma to inform health services and health policy. Validation of the recording of asthma diagnoses in electronic health records is essential to use these databases for credible epidemiological asthma research.Methods: We searched EMBASE and MEDLINE databases for studies that validated asthma diagnoses detected in electronic health records up to October 2016. Two reviewers independently assessed the full text against the predetermined inclusion criteria. Key data including author, year, data source, case definitions, reference standard, and validation statistics (including sensitivity, specificity, positive predictive value [PPV], and negative predictive value [NPV] were summarized in two tables.Results: Thirteen studies met the inclusion criteria. Most studies demonstrated a high validity using at least one case definition (PPV >80%. Ten studies used a manual validation as the reference standard; each had at least one case definition with a PPV of at least 63%, up to 100%. We also found two studies using a second independent database to validate asthma diagnoses. The PPVs of the best performing case definitions ranged from 46% to 58%. We found one study which used a questionnaire as the reference standard to validate a database case definition; the PPV of the case definition algorithm in this study was 89%. Conclusion: Attaining high PPVs (>80% is possible using each of the discussed validation

Validation of a case definition to define hypertension using administrative data.

Science.gov (United States)

Quan, Hude; Khan, Nadia; Hemmelgarn, Brenda R; Tu, Karen; Chen, Guanmin; Campbell, Norm; Hill, Michael D; Ghali, William A; McAlister, Finlay A

2009-12-01

We validated the accuracy of case definitions for hypertension derived from administrative data across time periods (year 2001 versus 2004) and geographic regions using physician charts. Physician charts were randomly selected in rural and urban areas from Alberta and British Columbia, Canada, during years 2001 and 2004. Physician charts were linked with administrative data through unique personal health number. We reviewed charts of approximately 50 randomly selected patients >35 years of age from each clinic within 48 urban and 16 rural family physician clinics to identify physician diagnoses of hypertension during the years 2001 and 2004. The validity indices were estimated for diagnosed hypertension using 3 years of administrative data for the 8 case-definition combinations. Of the 3,362 patient charts reviewed, the prevalence of hypertension ranged from 18.8% to 33.3%, depending on the year and region studied. The administrative data hypertension definition of "2 claims within 2 years or 1 hospitalization" had the highest validity relative to the other definitions evaluated (sensitivity 75%, specificity 94%, positive predictive value 81%, negative predictive value 92%, and kappa 0.71). After adjustment for age, sex, and comorbid conditions, the sensitivities between regions, years, and provinces were not significantly different, but the positive predictive value varied slightly across geographic regions. These results provide evidence that administrative data can be used as a relatively valid source of data to define cases of hypertension for surveillance and research purposes.

Exploring experiential value in online mobile gaming adoption.

Science.gov (United States)

Okazaki, Shintaro

2008-10-01

Despite the growing importance of the online mobile gaming industry, little research has been undertaken to explain why consumers engage in this ubiquitous entertainment. This study attempts to develop an instrument to measure experiential value in online mobile gaming adoption. The proposed scale consists of seven first-order factors of experiential value: intrinsic enjoyment, escapism, efficiency, economic value, visual appeal, perceived novelty, and perceived risklessness. The survey obtained 164 usable responses from Japanese college students. The empirical data fit our first-order model well, indicating a high level of reliability as well as convergent and discriminant validity. The single second-order model also shows an acceptable model fit.

Incorporating multi-leaf collimator leaf sequencing into iterative IMRT optimization

International Nuclear Information System (INIS)

Siebers, Jeffrey V.; Lauterbach, Marc; Keall, Paul J.; Mohan, Radhe

2002-01-01

Intensity modulated radiation therapy (IMRT) treatment planning typically considers beam optimization and beam delivery as separate tasks. Following optimization, a multi-leaf collimator (MLC) or other beam delivery device is used to generate fluence patterns for patient treatment delivery. Due to limitations and characteristics of the MLC, the deliverable intensity distributions often differ from those produced by the optimizer, leading to differences between the delivered and the optimized doses. Objective function parameters are then adjusted empirically, and the plan is reoptimized to achieve a desired deliverable dose distribution. The resulting plan, though usually acceptable, may not be the best achievable. A method has been developed to incorporate the MLC restrictions into the optimization process. Our in-house IMRT system has been modified to include the calculation of the deliverable intensity into the optimizer. In this process, prior to dose calculation, the MLC leaf sequencer is used to convert intensities to dynamic MLC sequences, from which the deliverable intensities are then determined. All other optimization steps remain the same. To evaluate the effectiveness of deliverable-based optimization, 17 patient cases have been studied. Compared with standard optimization plus conversion to deliverable beams, deliverable-based optimization results show improved isodose coverage and a reduced dose to critical structures. Deliverable-based optimization results are close to the original nondeliverable optimization results, suggesting that IMRT can overcome the MLC limitations by adjusting individual beamlets. The use of deliverable-based optimization may reduce the need for empirical adjustment of objective function parameters and reoptimization of a plan to achieve desired results

Collateral missing value imputation: a new robust missing value estimation algorithm for microarray data.

Science.gov (United States)

Sehgal, Muhammad Shoaib B; Gondal, Iqbal; Dooley, Laurence S

2005-05-15

Microarray data are used in a range of application areas in biology, although often it contains considerable numbers of missing values. These missing values can significantly affect subsequent statistical analysis and machine learning algorithms so there is a strong motivation to estimate these values as accurately as possible before using these algorithms. While many imputation algorithms have been proposed, more robust techniques need to be developed so that further analysis of biological data can be accurately undertaken. In this paper, an innovative missing value imputation algorithm called collateral missing value estimation (CMVE) is presented which uses multiple covariance-based imputation matrices for the final prediction of missing values. The matrices are computed and optimized using least square regression and linear programming methods. The new CMVE algorithm has been compared with existing estimation techniques including Bayesian principal component analysis imputation (BPCA), least square impute (LSImpute) and K-nearest neighbour (KNN). All these methods were rigorously tested to estimate missing values in three separate non-time series (ovarian cancer based) and one time series (yeast sporulation) dataset. Each method was quantitatively analyzed using the normalized root mean square (NRMS) error measure, covering a wide range of randomly introduced missing value probabilities from 0.01 to 0.2. Experiments were also undertaken on the yeast dataset, which comprised 1.7% actual missing values, to test the hypothesis that CMVE performed better not only for randomly occurring but also for a real distribution of missing values. The results confirmed that CMVE consistently demonstrated superior and robust estimation capability of missing values compared with other methods for both series types of data, for the same order of computational complexity. A concise theoretical framework has also been formulated to validate the improved performance of the CMVE

Development and validation of multivariable predictive model for thromboembolic events in lymphoma patients.

Science.gov (United States)

Antic, Darko; Milic, Natasa; Nikolovski, Srdjan; Todorovic, Milena; Bila, Jelena; Djurdjevic, Predrag; Andjelic, Bosko; Djurasinovic, Vladislava; Sretenovic, Aleksandra; Vukovic, Vojin; Jelicic, Jelena; Hayman, Suzanne; Mihaljevic, Biljana

2016-10-01

Lymphoma patients are at increased risk of thromboembolic events but thromboprophylaxis in these patients is largely underused. We sought to develop and validate a simple model, based on individual clinical and laboratory patient characteristics that would designate lymphoma patients at risk for thromboembolic event. The study population included 1,820 lymphoma patients who were treated in the Lymphoma Departments at the Clinics of Hematology, Clinical Center of Serbia and Clinical Center Kragujevac. The model was developed using data from a derivation cohort (n = 1,236), and further assessed in the validation cohort (n = 584). Sixty-five patients (5.3%) in the derivation cohort and 34 (5.8%) patients in the validation cohort developed thromboembolic events. The variables independently associated with risk for thromboembolism were: previous venous and/or arterial events, mediastinal involvement, BMI>30 kg/m(2) , reduced mobility, extranodal localization, development of neutropenia and hemoglobin level 3). For patients classified at risk (intermediate and high-risk scores), the model produced negative predictive value of 98.5%, positive predictive value of 25.1%, sensitivity of 75.4%, and specificity of 87.5%. A high-risk score had positive predictive value of 65.2%. The diagnostic performance measures retained similar values in the validation cohort. Developed prognostic Thrombosis Lymphoma - ThroLy score is more specific for lymphoma patients than any other available score targeting thrombosis in cancer patients. Am. J. Hematol. 91:1014-1019, 2016. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Development and Validation of the Mathematical Resilience Scale

Science.gov (United States)

Kooken, Janice; Welsh, Megan E.; McCoach, D. Betsy; Johnston-Wilder, Sue; Lee, Clare

2016-01-01

The Mathematical Resilience Scale measures students' attitudes toward studying mathematics, using three correlated factors: Value, Struggle, and Growth. The Mathematical Resilience Scale was developed and validated using exploratory and confirmatory factor analyses across three samples. Results provide a new approach to gauge the likelihood of…

Emotional Value Judgment and Achievement in Basic Science ...

African Journals Online (AJOL)

The study sought to examine emotional value judgment on student achievement in Basic Science. The study was carried out in Ijebu-North Local Government Area of Ogun State. Data were collected through valid questionnaire sent to five secondary schools within the local Government. One Hundred Junior Secondary II ...

Analysis of energy consumption, indoor climate, occupant satisfaction and overall evaluation of the project

DEFF Research Database (Denmark)

Zanghirella, Fabio; Thomsen, Kirsten Engelund; Knudsen, Henrik Nellemose

. Deliverable 23 Deliverable 23 is a deliverable produced as part of the final reporting of the project. It is meant to provide an overview of energy consumption analysis, indoor climate and occupants satisfaction investigations and an overall evaluation of the project. The distribution is public....

Reliability and Validity of Athletes Disability Index Questionnaire.

Science.gov (United States)

Noormohammadpour, Pardis; Hosseini Khezri, Alireza; Farahbakhsh, Farzin; Mansournia, Mohammad Ali; Smuck, Matthew; Kordi, Ramin

2018-03-01

The purpose of this study was to evaluate validity and reliability of a new proposed questionnaire for assessment of functional disability in athletes with low back pain (LBP). Validity and reliability study. Elite athletes participating in different fields of sports. Participants were 165 male and female athletes (between 12 and 50 years old) with LBP. Athlete Disability Index (ADI) Questionnaire which is developed by the authors for assessing LBP-related disability in athletes, Oswestry Disability Index (ODI), and the Roland-Morris Disability Questionnaire (RDQ). Self-reported responses were collected regarding LBP-related disability through ADI, ODI, and RDQ. The test-retest reliability was strong, and intraclass correlation value ranged between 0.74 and 0.94. The Cronbach alpha coefficient value of 0.91 (P visual analog scale was r = 0.626 (P disability levels were mild in the large majority of subjects (91.5% and 86.0%, respectively). Alternatively, disability assessments by the ADI did not cluster at the mild level and ranged more broadly from mild to very high. The ADI is a reliable and valid instrument for assessing disability in athletes with LBP. Compared with the available LBP disability questionnaires used in the general population, ADI can more precisely stratify the disability levels of athletes due to LBP.

Electrostatic discharges and their effect on the validity of registered values in intracranial pressure monitors

DEFF Research Database (Denmark)

Andresen, Morten; Thomsen, Ole Cornelius; Juhler, Marianne

2013-01-01

Object Intracranial pressure (ICP) monitoring is used extensively in clinical practice, and as such, the accuracy of registered ICP values is paramount. Clinical observations of nonphysiological changes in ICP have called into question the accuracy of registered ICP values. Subsequently, the auth......Object Intracranial pressure (ICP) monitoring is used extensively in clinical practice, and as such, the accuracy of registered ICP values is paramount. Clinical observations of nonphysiological changes in ICP have called into question the accuracy of registered ICP values. Subsequently......, the authors have tried to determine if the ICP monitors from major manufacturers were affected by electrostatic discharges (ESDs), if the changes were permanent or transient in nature, and if the changes were modified by the addition of different electrical appliances normally used in the neurointensive care....... Results Five pressure monitors from 4 manufacturers were evaluated. Three monitors containing electrical circuitry at the tip of the transducer were all affected by ESDs. Clinically significant permanent changes in the reported ICP values for 1 pressure monitor were observed, as well as temporary...

The Conceptualization of Value in the Value Proposition of New Health Technologies; Comment on “Providing Value to New Health Technology: The Early Contribution of Entrepreneurs, Investors, and Regulatory Agencies”

Directory of Open Access Journals (Sweden)

Sandra C. Buttigieg

2018-02-01

Full Text Available Lehoux et al provide a highly valid contribution in conceptualizing value in value propositions for new health technologies and developing an analytic framework that illustrates the interplay between health innovation supply-side logic (the logic of emergence and demand-side logic (embedding in the healthcare system. This commentary brings forth several considerations on this article. First, a detailed stakeholder analysis provides the necessary premonition of potential hurdles in the development, implementation and dissemination of a new technology. This can be achieved by categorizing potential stakeholder groups on the basis of the potential impact of future technology. Secondly, the conceptualization of value in value propositions of new technologies should not only embrace business/economic and clinical values but also ethical, professional and cultural values, as well as factoring in the notion of usability and acceptance of new technology. As a final note, the commentary emphasises the point that technology should facilitate delivery of care without negatively affecting doctorpatient communications, physical examination skills, and development of clinical knowledge.

Creative Industries, Value Theory and Michael Heinrich’s New Reading of Marx

Directory of Open Access Journals (Sweden)

Frederick H. Pitts

2015-06-01

Full Text Available This article utilises the new reading of Marx found in the work of Michael Heinrich to analyse the creative industries. It considers the role played in the production of value by the labour that takes place in the sphere of circulation. The specific focus is on creative industries such as graphic design, advertising and branding. It applies Heinrich's conceptualisation of 'social validation' to these sectors. This suggests that valorisation depends upon goods and services attaining commodity status by selling for money. Value is subject to this validation. The capitalist use of advertising, graphic design and branding guarantees the possibility of this validation. Using Heinrich, it reevaluates claims made about the creative industries and cognate fields in three main respects. First, it exposes as inadequate certain Marxist understandings of productive and unproductive labour and the place of circulation activities within this distinction. Second, it refutes autonomist Marxist claims as to the immeasurability of immaterial labour and the redundancy of the law of value. Third, it suggests that creative industries possess a significant role in a capitalist economy blighted by a necessity towards the overproduction of commodities.

A Systematic Review on the Validity of Teledentistry.

Science.gov (United States)

Alabdullah, Jafar H; Daniel, Susan J

2018-01-05

The aim of this systematic review was to evaluate the validity of using teledentistry in oral care examination and diagnosis. In June 2016, a systematic search of the literature was conducted without time restrictions in three electronic databases (Ebscohost, Pubmed, and Scopus). Two reviewers screened the retrieved articles first by title and then by abstract to determine relevant articles for full text review. Studies included were as follows: (1) related to teledentistry, (2) available in full text and English, (3) compared teledentistry application to a gold standard, and (4) provided clear statistical tests for validity. The methodological quality of studies was determined using the "Quality Assessment of Studies of Diagnostic Accuracy (QUADAS)." Seventy-nine studies met the initial search criteria. Following removal of duplicate articles, only 58 were remaining and reviewed by title and abstract, yielding 14 full-text articles. Nine of the full-text articles met the inclusion criteria. Results of the QUADAS assessment varied from 9 to 13 out of 14 items; therefore, studies demonstrated high quality (>60%). Validity of teledentistry varied and is reported by range for the following statistics: sensitivity (n = 8, 25-100%), specificity (n = 7, 68-100%), positive predictive value (n = 5, 57-100%), and negative predictive value (n = 5, 50-100%). Kappa statistics were also reported for evaluation of reliability between gold standard and teledentistry examination (n = 6, 46-93%). Teledentistry could be comparable to face-to-face for oral screening, especially in school-based programs, rural areas and areas with limited access to care, and long-term care facilities. Identification of oral diseases, referrals, and teleconsultations are possible and valid. The need for methodologically designed studies with appropriate statistical tests to determine the validity of teledentistry exists.

Perception of competence in middle school physical education: instrument development and validation.

Science.gov (United States)

Scrabis-Fletcher, Kristin; Silverman, Stephen

2010-03-01

Perception of Competence (POC) has been studied extensively in physical activity (PA) research with similar instruments adapted for physical education (PE) research. Such instruments do not account for the unique PE learning environment. Therefore, an instrument was developed and the scores validated to measure POC in middle school PE. A multiphase design was used consisting of an intensive theoretical review, elicitation study, prepilot study, pilot study, content validation study, and final validation study (N=1281). Data analysis included a multistep iterative process to identify the best model fit. A three-factor model for POC was tested and resulted in root mean square error of approximation = .09, root mean square residual = .07, goodness offit index = .90, and adjusted goodness offit index = .86 values in the acceptable range (Hu & Bentler, 1999). A two-factor model was also tested and resulted in a good fit (two-factor fit indexes values = .05, .03, .98, .97, respectively). The results of this study suggest that an instrument using a three- or two-factor model provides reliable and valid scores ofPOC measurement in middle school PE.

Medical Students' Personal Qualities and Values as Correlates of Primary Care Interest

Science.gov (United States)

Borges, Nicole J.; Jones, Bonnie J.

2004-01-01

Medical schools must use selection methods that validly measure applicants' noncognitive qualities, but primary-care (PC) schools have a particular need. This study correlated entering students' personality and values scores with their professed interest in PC. 93 medical students completed instruments assessing personality (16PF & PSP), values,…

Reliability and validity of the visual analogue scale for disability in patients with chronic musculoskeletal pain.

Science.gov (United States)

Boonstra, Anne M; Schiphorst Preuper, Henrica R; Reneman, Michiel F; Posthumus, Jitze B; Stewart, Roy E

2008-06-01

To determine the reliability and concurrent validity of a visual analogue scale (VAS) for disability as a single-item instrument measuring disability in chronic pain patients was the objective of the study. For the reliability study a test-retest design and for the validity study a cross-sectional design was used. A general rehabilitation centre and a university rehabilitation centre was the setting for the study. The study population consisted of patients over 18 years of age, suffering from chronic musculoskeletal pain; 52 patients in the reliability study, 344 patients in the validity study. Main outcome measures were as follows. Reliability study: Spearman's correlation coefficients (rho values) of the test and retest data of the VAS for disability; validity study: rho values of the VAS disability scores with the scores on four domains of the Short-Form Health Survey (SF-36) and VAS pain scores, and with Roland-Morris Disability Questionnaire scores in chronic low back pain patients. Results were as follows: in the reliability study rho values varied from 0.60 to 0.77; and in the validity study rho values of VAS disability scores with SF-36 domain scores varied from 0.16 to 0.51, with Roland-Morris Disability Questionnaire scores from 0.38 to 0.43 and with VAS pain scores from 0.76 to 0.84. The conclusion of the study was that the reliability of the VAS for disability is moderate to good. Because of a weak correlation with other disability instruments and a strong correlation with the VAS for pain, however, its validity is questionable.

Concurrent Validation of Experimental Army Enlisted Personnel Selection and Classification Measures

National Research Council Canada - National Science Library

Knapp, Deirdre J; Tremble, Trueman R

2007-01-01

.... This report documents the method and results of the criterion-related validation. The predictor set includes measures of cognitive ability, temperament, psychomotor skills, values, expectations...

Protean and boundaryless career attitudes scales: Spanish translation and validation Protean and boundaryless career attitudes scales: Spanish translation and validation Protean and boundaryless career attitudes scales: Spanish translation and validation

Directory of Open Access Journals (Sweden)

Oriol Lordan

2012-04-01

Full Text Available Purpose: The aim of this paper is to translate into Spanish and examine the psychometric properties of the resulting Spanish version of Briscoe, Hall and DeMuth (2006’s Protean and Boundayless Career Attitude Scale, encompassing: Self-Direction, Values-driven predispositions, Boundaryless mindset and Organizational Mobility Preference. Design/methodology/approach: Translation of the Protean and Boundayless Career Attitude Scale was carried out using a back-translation procedure and cognitive interviews were conducted to ensure an accurate interpretation of questionnaire items. The validity and reliability of the scale were evaluated using exploratory factor analysis and Cronbach’s alpha coefficients. Finally, confirmatory factor analysis was performed to evaluate the factor structure of the modified version of the scale, which consists in those items with higher factor loadings.Findings: The reliability coefficients of the modified scale are consistent with those reported by Briscoe et al. (2006. Nevertheless, the values-driven attitudes scale seem to measure two latent traits: strong core beliefs regarding one’s definition of career success and individual emphasis of core personal values through work (reliance on personal values when individual and organizational values do not match.Originality/value: This is the first study which provides a Spanish translation of the Protean and Boundaryless Career Attitude Scale.Purpose: The aim of this paper is to translate into Spanish and examine the psychometric properties of the resulting Spanish version of Briscoe, Hall and DeMuth (2006’s Protean and Boundayless Career Attitude Scale, encompassing: Self-Direction, Values-driven predispositions, Boundaryless mindset and Organizational Mobility Preference.Design/methodology/approach: Translation of the Protean and Boundayless Career Attitude Scale was carried out using a back-translation procedure and cognitive interviews were conducted to

Validity of the equivalent-photon approximation for the production of massive spin-1 particles

International Nuclear Information System (INIS)

Jayaraman, T.

1986-01-01

It is pointed out that the equivalent-photon approximation (EPA) for processes with massive spin-1 particles in the final state would have validity in a more restricted kinematic domain than for processes where it is commonly applied, viz., those with spin-1/2 or spin-0 particles in the final state. The criterion for the validity of EPA for the two-photon production of a pair of charged, massive, point-like spin-1 particles V ± , each of mass M and with a standard magnetic moment (k=1) is obtained. In a process in which one of the photons is real and the other virtual with four-momentum q, the condition for the validity of EPA is absolute value of q 2 2 , in addition to the usual condition absolute value of q 2 2 , W being the V + V - invariant mass. In a process in which both photons are virtual (with four-momenta q and q'), the condition is absolute value of q 2 absolute value of q' 2 W 4 8 , in addition to absolute value of q 2 2 , absolute value of q' 2 2 and absolute value of q 2 2 , absolute value of q' 2 2 . Even when these extra conditions permitting the use of EPA are not fulfilled, convenient approximate expressions may still be obtained assuming merely absolute value of q 2 2 and absolute value of q' 2 2 . It is also discussed how the extra conditions are altered when the vector bosons are incorporated in a spontaneously broken gauge theory. Examples of W boson production in Weinberg-Salam model are considered for which the condition absolute value of q 2 absolute value of q' 2 W 4 8 is shown to be removed. (author)

WSRC approach to validation of criticality safety computer codes

International Nuclear Information System (INIS)

Finch, D.R.; Mincey, J.F.

1991-01-01

Recent hardware and operating system changes at Westinghouse Savannah River Site (WSRC) have necessitated review of the validation for JOSHUA criticality safety computer codes. As part of the planning for this effort, a policy for validation of JOSHUA and other criticality safety codes has been developed. This policy will be illustrated with the steps being taken at WSRC. The objective in validating a specific computational method is to reliably correlate its calculated neutron multiplication factor (K eff ) with known values over a well-defined set of neutronic conditions. Said another way, such correlations should be: (1) repeatable; (2) demonstrated with defined confidence; and (3) identify the range of neutronic conditions (area of applicability) for which the correlations are valid. The general approach to validation of computational methods at WSRC must encompass a large number of diverse types of fissile material processes in different operations. Special problems are presented in validating computational methods when very few experiments are available (such as for enriched uranium systems with principal second isotope 236 U). To cover all process conditions at WSRC, a broad validation approach has been used. Broad validation is based upon calculation of many experiments to span all possible ranges of reflection, nuclide concentrations, moderation ratios, etc. Narrow validation, in comparison, relies on calculations of a few experiments very near anticipated worst-case process conditions. The methods and problems of broad validation are discussed

Uncertainty of Monetary Valued Ecosystem Services - Value Transfer Functions for Global Mapping.

Directory of Open Access Journals (Sweden)

Stefan Schmidt

Full Text Available Growing demand of resources increases pressure on ecosystem services (ES and biodiversity. Monetary valuation of ES is frequently seen as a decision-support tool by providing explicit values for unconsidered, non-market goods and services. Here we present global value transfer functions by using a meta-analytic framework for the synthesis of 194 case studies capturing 839 monetary values of ES. For 12 ES the variance of monetary values could be explained with a subset of 93 study- and site-specific variables by utilizing boosted regression trees. This provides the first global quantification of uncertainties and transferability of monetary valuations. Models explain from 18% (water provision to 44% (food provision of variance and provide statistically reliable extrapolations for 70% (water provision to 91% (food provision of the terrestrial earth surface. Although the application of different valuation methods is a source of uncertainty, we found evidence that assuming homogeneity of ecosystems is a major error in value transfer function models. Food provision is positively correlated with better life domains and variables indicating positive conditions for human well-being. Water provision and recreation service show that weak ownerships affect valuation of other common goods negatively (e.g. non-privately owned forests. Furthermore, we found support for the shifting baseline hypothesis in valuing climate regulation. Ecological conditions and societal vulnerability determine valuation of extreme event prevention. Valuation of habitat services is negatively correlated with indicators characterizing less favorable areas. Our analysis represents a stepping stone to establish a standardized integration of and reporting on uncertainties for reliable and valid benefit transfer as an important component for decision support.

The Attitude Determination Scale for Value Acquisition: A Validity and Reliability Study

Science.gov (United States)

Cetin, Saban

2017-01-01

This study aims to develop a measurement tool having measurement reliability with the aim of determining attitudes for values acquisition of secondary school students. The study was conducted on totally 325 high school senior students as 200 female and 125 male students in spring semester of 2014-2015 educational year. In the study, expert opinion…

Validation of bioelectrical impedance analysis in Ethiopian adults with HIV

DEFF Research Database (Denmark)

Hegelund, Maria H; Wells, Jonathan C; Girma, Tsinuel

2017-01-01

in populations of different ethnic origin and health status. The aim of the present study was to test the validity of BIA in Ethiopian antiretroviral-naive HIV patients. BIA was validated against the 2H dilution technique by comparing fat-free mass (FFM) measured by the two methods using paired t tests and Bland...... % were underweight with a BMI below 18·5 kg/m2. There were no differences in FFM between the methods. Overall, BIA slightly underestimated FFM by 0·1 kg (-0·1, 95 % CI -0·3, 0·2 kg). The Bland-Altman plot indicated acceptable agreement with an upper limit of agreement of 4·5 kg and a lower limit...... of agreement of -4·6 kg, but with a small correlation between the mean difference and the average FFM. BIA slightly overestimated FFM at low values compared with the 2H dilution technique, while it slightly underestimated FFM at high values. In conclusion, BIA proved to be valid in this population and may...

Empirical validation and proof of added value of MUSICA's tropospheric δD remote sensing products

Science.gov (United States)

Schneider, M.; González, Y.; Dyroff, C.; Christner, E.; Wiegele, A.; Barthlott, S.; García, O. E.; Sepúlveda, E.; Hase, F.; Andrey, J.; Blumenstock, T.; Guirado, C.; Ramos, R.; Rodríguez, S.

2015-01-01

The project MUSICA (MUlti-platform remote Sensing of Isotopologues for investigating the Cycle of Atmospheric water) integrates tropospheric water vapour isotopologue remote sensing and in situ observations. This paper presents a first empirical validation of MUSICA's H2O and δD remote sensing products, generated from ground-based FTIR (Fourier transform infrared), spectrometer and space-based IASI (infrared atmospheric sounding interferometer) observation. The study is made in the area of the Canary Islands in the subtropical northern Atlantic. As reference we use well calibrated in situ measurements made aboard an aircraft (between 200 and 6800 m a.s.l.) by the dedicated ISOWAT instrument and on the island of Tenerife at two different altitudes (at Izaña, 2370 m a.s.l., and at Teide, 3550 m a.s.l.) by two commercial Picarro L2120-i water isotopologue analysers. The comparison to the ISOWAT profile measurements shows that the remote sensors can well capture the variations in the water vapour isotopologues, and the scatter with respect to the in situ references suggests a δD random uncertainty for the FTIR product of much better than 45‰ in the lower troposphere and of about 15‰ for the middle troposphere. For the middle tropospheric IASI δD product the study suggests a respective uncertainty of about 15‰. In both remote sensing data sets we find a positive δD bias of 30-70‰. Complementing H2O observations with δD data allows moisture transport studies that are not possible with H2O observations alone. We are able to qualitatively demonstrate the added value of the MUSICA δD remote sensing data. We document that the δD-H2O curves obtained from the different in situ and remote sensing data sets (ISOWAT, Picarro at Izaña and Teide, FTIR, and IASI) consistently identify two different moisture transport pathways to the subtropical north eastern Atlantic free troposphere.

Inculcation of Values across the School Curriculum: Development and Validation of Teachers' Orientation Scale

OpenAIRE

Mohamad Sahari; Abdul Aziz Mohd Sultan; Mohd Tahrim Raffor; Ismail Sheikh Ahmad; Ahmad Marzuki Hj. Zainuddin; Zainurin Abdul Rahman; Tunku Badariah Tunku Ahmad; Haniza Rais

1999-01-01

Teacher orientation to the inculcation of values across school curriculum-a function of the teacher knowledge and attitudes-has been conceptualised as his or her (1) identification with the goals of the curriculum, and (2) conformity with the predetermined instructional behaviours. Based on this framework, the study explored the construct of teacher orientation to the inculcation of values across school subjects. More specifically, the study examined the likelihood of two underlying dimension...

Improved validation of IDP ensembles by one-bond Cα–Hα scalar couplings

Energy Technology Data Exchange (ETDEWEB)

Gapsys, Vytautas [Max Planck Institute for Biophysical Chemistry, Computational Biomolecular Dynamics Group (Germany); Narayanan, Raghavendran L.; Xiang, ShengQi [Max Planck Institute for Biophysical Chemistry, Department for NMR-Based Structural Biology (Germany); Groot, Bert L. de [Max Planck Institute for Biophysical Chemistry, Computational Biomolecular Dynamics Group (Germany); Zweckstetter, Markus, E-mail: markus.zweckstetter@dzne.de [Max Planck Institute for Biophysical Chemistry, Department for NMR-Based Structural Biology (Germany)

2015-11-15

Intrinsically disordered proteins (IDPs) are best described by ensembles of conformations and a variety of approaches have been developed to determine IDP ensembles. Because of the large number of conformations, however, cross-validation of the determined ensembles by independent experimental data is crucial. The {sup 1}J{sub CαHα} coupling constant is particularly suited for cross-validation, because it has a large magnitude and mostly depends on the often less accessible dihedral angle ψ. Here, we reinvestigated the connection between {sup 1}J{sub CαHα} values and protein backbone dihedral angles. We show that accurate amino-acid specific random coil values of the {sup 1}J{sub CαHα} coupling constant, in combination with a reparameterized empirical Karplus-type equation, allow for reliable cross-validation of molecular ensembles of IDPs.

Classifying snakebite in South Africa: Validating a scoring system

African Journals Online (AJOL)

In addition, coagulopathy may not be identified until the patient manifests with ... To develop and validate a scoring system for managing snakebites in South Africa (SA). Methods. ... that its greatest value is in identifying those patients who do ...

A study on construction, validation and determination of normalization of adolescents depression scale

Directory of Open Access Journals (Sweden)

Khadijeh Babakhani

2014-01-01

Full Text Available This paper presents an empirical investigation to construct, to validate and to determine normalization factors associated with adolescents depression scale. The study is performed among 750 randomly selected guided and high school students, 364 male and 386 female, who live in city of Zanjan, Iran. Validity of Beck Depression Inventory (BDI, Validity of Simpson-Angus Scale (SAS and divergence validity of the Coopersmith self- esteem coefficients are 0.72, 0.37 and -0.71, respectively. Result suggests that adolescents’ depression test is a reliable and valid tool for assessing depression, with utility in both research and clinical settings, counseling centers. In addition, the results of correlation test indicate there are some meaningful differences between depression levels of female and male students. In fact, our survey indicates that female students have more depression than male students do (F-value = 33.06, Sig. = 0.000. In addition, there are some meaningful differences between depression levels in various educational levels (F-value = 8.59, Sig. = 0.000. However, the study does not find sufficient evidence to believe there is any meaningful correlation between educational backgrounds and gender.

Site characterization and validation - Tracer migration experiment in the validation drift, report 2, Part 2: breakthrough curves in the validation drift appendices 5-9

International Nuclear Information System (INIS)

Birgersson, L.; Widen, H.; Aagren, T.; Neretnieks, I.; Moreno, L.

1992-01-01

Flowrate curves for the 53 sampling areas in the validation drift with measureable flowrates are given. The sampling area 267 is treated as three separate sampling areas; 267:1, 267:2 and 267:3. The total flowrate for these three sampling areas is given in a separate plot. The flowrates are given in ml/h. The time is given in hours since April 27 00:00, 1990. Disturbances in flowrates are observed after 8500 hours due to opening of boreholes C1 and W1. Results from flowrate measurements after 8500 hours are therefore excluded. The tracer breakthrough curves for 38 sampling areas in the validation drift are given as concentration values versus time. The sampling area 267 is treated as three separate sampling areas; 267:1, 267:2 and 267:3. This gives a total of 40 breakthrough curves for each tracer. (au)

Model Validation and Verification of Data Mining from the ...

African Journals Online (AJOL)

Michael Horsfall

In this paper, we seek to present a hybrid method for Model Validation and Verification of Data Mining from the ... This model generally states the numerical value of knowledge .... procedures found in the field of software engineering should be ...

Improved Harmony Search Algorithm with Chaos for Absolute Value Equation

Directory of Open Access Journals (Sweden)

Shouheng Tuo

2013-11-01

Full Text Available In this paper, an improved harmony search with chaos (HSCH is presented for solving NP-hard absolute value equation (AVE Ax - |x| = b, where A is an arbitrary square matrix whose singular values exceed one. The simulation results in solving some given AVE problems demonstrate that the HSCH algorithm is valid and outperforms the classical HS algorithm (CHS and HS algorithm with differential mutation operator (HSDE.

Toward a Measure of Accountability in Nursing: A Three-Stage Validation Study.

Science.gov (United States)

Drach-Zahavy, Anat; Leonenko, Marina; Srulovici, Einav

2018-06-04

To develop and psychometrically evaluate a three-dimensional questionnaire suitable for evaluating personal and organizational accountability in nurses. Accountability is defined as a three-dimensional value, directing professionals to take responsibility for their decisions and actions, to be willing to explain them (transparency) and to be judged according to society's accepted values (answerability). Despite the relatively clear definition, measurement of accountability lags well behind. Existing self-report questionnaires do not fully capture the complexity of the concept; nor do they capture the different sources of accountability (e.g., personal accountability, organizational accountability). A three-stage measure development. Data were collected during 2015-2016. In Phase 1, an initial database of items (N = 74) was developed, based on literature review and qualitative study, establishing face and content validity. In Phase 2, the face, content, construct and criterion-related validity of the initial questionnaires (19 items for personal and organizational accountability questionnaire) was established with a sample of 229 nurses. In Phase 3, the final questionnaires (19 items each) were validated with a new sample of 329 nurses and established construct validity. The final version of the instruments comprised 19 items, suitable for assessing personal and organizational accountability. The questionnaire referred to the dimensions of responsibility, transparency and answerability. The findings established the instrument's content, construct and criterion-related validity, as well as good internal reliability. The questionnaire portrays accountability in nursing, by capturing nurses' subjective perceptions of accountability dimensions (responsibility, transparency, answerability), as demonstrated by personal and organizational values. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

[Validation of the portuguese version of the Mini-Social Phobia Inventory (Mini-SPIN)].

Science.gov (United States)

D'El Rey, Gustavo José Fonseca; Matos, Cláudia Wilmor

2009-01-01

Social phobia (also known as social anxiety disorder) is a severe mental disorder that brings distress and disability. The aim of this study was validate to the Portuguese language the Mini-Social Phobia Inventory (Mini-SPIN) in a populational sample. We performed a discriminative validity study of the Mini-SPIN in a sample of 644 subjects (Mini-SPIN positive group: n = 218 and control/negative group: n = 426) of a study of anxiety disorders' prevalence in the city of Santo André-SP. The Portuguese version of the Mini-SPIN (with score of 6 points, suggested in the original English version) demonstrated a sensitivity of 95.0%, specificity of 80.3%, positive predictive value of 52.8%, negative predictive value of 98.6% and incorrect classification rate of 16.9%. With score of 7 points, was observed an increase in the specificity and positive predictive value (88.6% and 62.7%), while the sensitivity and negative predictive value (84.8% and 96.2%) remained high. The Portuguese version of the Mini-SPIN showed satisfactory psychometric qualities in terms of discriminative validity. In this study, the cut-off of 7, was considered to be the most suitable to screening of the generalized social phobia.

Improving Value for Patients with Eczema.

Science.gov (United States)

Block, Julie

2018-04-01

Chronic diseases now represent a cost majority in the United States health care system. Contributing factors to rising costs include expensive novel and emerging therapies, under-treatment of disease, under-management of comorbidities, and patient dissatisfaction with care results. Critical to identifying replicable improvement methods is a reliable model to measure value. If we understand value within healthcare consumerism to be equal to a patient's health outcome improvement over costs associated with care (Value=Outcomes/Costs), we can use this equation to measure the improvement of value. Research and literature show that patient activation-the skills and confidence that equip patients to become actively engaged in their health care-impact health outcomes, costs, and patient experience. Reaching patient activation through engagement methods including shared decision-making (SDM) lead to improved value of care received. The National Eczema Association (NEA) Shared Decision-Making Resource Center can be a transformative strategy to measure and evaluate value of health care interventions for eczema patients to advance a value-driven health care system in the United States. Through this Resource Center, NEA will measure patient value through their own perceptions using validated PRO instruments and other patient-generated health data. Assessment of this data will reveal findings that can assist researchers in evaluating the impact this care framework on patient-perceived value across other chronic diseases. Copyright © 2018 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Design for validation: An approach to systems validation

Science.gov (United States)

Carter, William C.; Dunham, Janet R.; Laprie, Jean-Claude; Williams, Thomas; Howden, William; Smith, Brian; Lewis, Carl M. (Editor)

1989-01-01

Every complex system built is validated in some manner. Computer validation begins with review of the system design. As systems became too complicated for one person to review, validation began to rely on the application of adhoc methods by many individuals. As the cost of the changes mounted and the expense of failure increased, more organized procedures became essential. Attempts at devising and carrying out those procedures showed that validation is indeed a difficult technical problem. The successful transformation of the validation process into a systematic series of formally sound, integrated steps is necessary if the liability inherent in the future digita-system-based avionic and space systems is to be minimized. A suggested framework and timetable for the transformtion are presented. Basic working definitions of two pivotal ideas (validation and system life-cyle) are provided and show how the two concepts interact. Many examples are given of past and present validation activities by NASA and others. A conceptual framework is presented for the validation process. Finally, important areas are listed for ongoing development of the validation process at NASA Langley Research Center.

Bayesian risk-based decision method for model validation under uncertainty

International Nuclear Information System (INIS)

Jiang Xiaomo; Mahadevan, Sankaran

2007-01-01

This paper develops a decision-making methodology for computational model validation, considering the risk of using the current model, data support for the current model, and cost of acquiring new information to improve the model. A Bayesian decision theory-based method is developed for this purpose, using a likelihood ratio as the validation metric for model assessment. An expected risk or cost function is defined as a function of the decision costs, and the likelihood and prior of each hypothesis. The risk is minimized through correctly assigning experimental data to two decision regions based on the comparison of the likelihood ratio with a decision threshold. A Bayesian validation metric is derived based on the risk minimization criterion. Two types of validation tests are considered: pass/fail tests and system response value measurement tests. The methodology is illustrated for the validation of reliability prediction models in a tension bar and an engine blade subjected to high cycle fatigue. The proposed method can effectively integrate optimal experimental design into model validation to simultaneously reduce the cost and improve the accuracy of reliability model assessment

Orthorexia nervosa: validation of a diagnosis questionnaire.

Science.gov (United States)

Donini, L M; Marsili, D; Graziani, M P; Imbriale, M; Cannella, C

2005-06-01

To validate a questionnaire for the diagnosis of orhorexia oervosa, an eating disorder defined as "maniacal obsession for healthy food". 525 subjects were enrolled. Then they were randomized into two samples (sample of 404 subjects for the construction of the test for the diagnosis of orthorexia ORTO-15; sample of 121 subjects for the validation of the test). The ORTO-15 questionnaire, validated for the diagnosis of orthorexia, is made-up of 15 multiple-choice items. The test we proposed for the diagnosis of orthorexia (ORTO 15) showed a good predictive capability at a threshold value of 40 (efficacy 73.8%, sensitivity 55.6% and specificity 75.8%) also on verification with a control sample. However, it has a limit in identifying the obsessive disorder. For this reason we maintain that further investigation is necessary and that new questions useful for the evaluation of the obsessive-compulsive behavior should be added to the ORTO-15 questionnaire.

Structural Validity of the Polish Adaptation of the Picture-Based Value Survey for Children (PBVS-C)

Science.gov (United States)

Cieciuch, Jan; Harasimczuk, Justyna; Doring, Anna K.

2013-01-01

Recent years have witnessed an increasing number of studies, also in the field of educational psychology, on values within the framework proposed by Schwartz, involving younger and younger respondents. A fresh impetus to studies on children's values was given by the Picture-Based Value Survey for Children (PBVS-C), which was developed by Doring…

On-line caloric value sensor and validation of dynamic models applied to municipal solid waste

NARCIS (Netherlands)

Kessel, van L.B.M.; Leskens, M.; Brem, G.

2002-01-01

This paper deals with two aspects concerning the optimization of municipal solid waste combustion (MSWC) processes. First of all, an on-line calorific value sensor is discussed by means of which the calorific value of the waste can be estimated from actual process data. Experimental results on a

Development and external validation of a new PTA assessment scale

Directory of Open Access Journals (Sweden)

Jacobs Bram

2012-08-01

Full Text Available Abstract Background Post-traumatic amnesia (PTA is a key symptom of traumatic brain injury (TBI. Accurate assessment of PTA is imperative in guiding clinical decision making. Our aim was to develop and externally validate a short, examiner independent and practical PTA scale, by selecting the most discriminative items from existing scales and using a three-word memory test. Methods Mild, moderate and severe TBI patients and control subjects were assessed in two separate cohorts, one for derivation and one for validation, using a questionnaire comprised of items from existing PTA scales. We tested which individual items best discriminated between TBI patients and controls, represented by sensitivity and specificity. We then created our PTA scale based on these results. This new scale was externally evaluated for its discriminative value using Receiver Operating Characteristic (ROC analysis and compared to existing PTA scales. Results The derivation cohort included 126 TBI patients and 31 control subjects; the validation cohort consisted of 132 patients and 30 controls. A set of seven items was eventually selected to comprise the new PTA scale: age, name of hospital, time, day of week, month, mode of transport and recall of three words. This scale demonstrated adequate discriminative values compared to existing PTA scales on three consecutive administrations in the validation cohort. Conclusion We introduce a valid, practical and examiner independent PTA scale, which is suitable for mild TBI patients at the emergency department and yet still valuable for the follow-up of more severely injured TBI patients.

Spanish validation of the Negative Symptom Assessment-16 (NSA-16) in patients with schizophrenia.

Science.gov (United States)

Garcia-Alvarez, Leticia; Garcia-Portilla, María Paz; Saiz, Pilar Alejandra; Fonseca-Pedrero, Eduardo; Bobes-Bascaran, María Teresa; Gomar, Jesús; Muñiz, José; Bobes, Julio

2018-04-05

Negative symptoms are prevalent in schizophrenia and associated with a poorer outcome. Validated newer psychometric instruments could contribute to better assessment and improved treatment of negative symptoms. The Negative Symptom Assessment-16 (NSA-16) has been shown to have strong psychometric properties, but there is a need for validation in non-English languages. This study aimed to examine the psychometric properties of a Spanish version of the NSA-16 (Sp-NSA-16). Observational, cross-sectional validation study in a sample of 123 outpatients with schizophrenia. NSA-16, PANSS, HDRS, CGI-SCH and PSP. The results indicate appropriate psychometric properties, high internal consistency (Cronbach's alpha=0.86), convergent validity (PANSS negative scale, PANSS Marder Negative Factor and CGI-negative symptoms r values between 0.81 and 0.94) and divergent validity (PANSS positive scale and the HDRS r values between 0.10 and 0.34). In addition, the NSA-16 also exhibited discriminant validity (ROC curve=0.97, 95% CI=0.94 to 1.00; 94.3% sensitivity and 83.3% specificity). The Sp-NSA-16 is reliable and valid for measuring negative symptoms in patients with schizophrenia. This provides Spanish clinicians with a new tool for clinical practice and research. However, it is necessary to provide further information about its inter-rater reliability. Copyright © 2018 SEP y SEPB. Publicado por Elsevier España, S.L.U. All rights reserved.

Development, validation and psychometric properties of the Arabic version of the Orofacial Esthetic Scale: OES-Ar.

Science.gov (United States)

Alhajj, Mohammed Nasser; Amran, Abdullah Ghalib; Halboub, Esam; Al-Basmi, Abdulghani Ali; Al-Ghabri, Fawaz Abdullah

2017-07-01

This study aimed at developing the Arabic version of the Orofacial Esthetic Scale (OES-Ar) and to investigate its psychometric properties among Arabic-speaking population with and without esthetic impairments. Translation and cross-cultural adaptation was done according to the standard guidelines. Internal consistency was assessed on 230 participants. For test-retest reliability, 50 subjects with natural teeth were recalled within a period of 2 weeks. Validity of the OES-Ar was tested by construct, convergent, and discriminant validity tests. Responsiveness to esthetic changes was assessed in 60 patients. The results showed excellent internal consistency with Cronbach's alpha value of 0.92 and inter-item correlation average value of 0.60. The ICC values ranged from 0.87 to 0.96 which indicated excellent agreement. Construct validity of the OES-Ar was confirmed to be one-factor structure (one-dimensional). For convergent validity, a significant correlation was found between OES summary score and overall impression of the orofacial esthetic as well as between OES summary score and the summary score of the three questions of the OHIP-49Ar related to esthetic. The discriminant validity test revealed significant differences between different study groups (Pesthetics in Arabic-speaking patients. Copyright © 2016 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

A silicon sol-gel approach to the development of forensic blood substitutes: Design Considerations for Research and Training

Science.gov (United States)

Stotesbury, Theresa E.

The research and development of synthetic blood substitutes is a reported need within the forensic community. This work contributes to the growing body of knowledge in bloodstain pattern analysis by offering a materials science approach to designing, producing and testing synthetic forensic blood substitutes. A key deliverable from this research is the creation of a robust silicon-based material using the solution-gelation technique that has been validated for controlled passive drip and spatter simulation. The work investigates the physical properties (viscosity, surface tension and density) of forensic blood substitute formulations and describes the similarity in the spreading dynamics of the optimized material to whole human blood. It then explores how blood and other fluids behave in impact simulation using high-speed video analysis and supports the use of the optimized material for spatter simulation. Finally, the work highlights the practical value of the material as an educational tool for both basic and advanced bloodstain experimentation and training.

Bayesian leave-one-out cross-validation approximations for Gaussian latent variable models

DEFF Research Database (Denmark)

Vehtari, Aki; Mononen, Tommi; Tolvanen, Ville

2016-01-01

The future predictive performance of a Bayesian model can be estimated using Bayesian cross-validation. In this article, we consider Gaussian latent variable models where the integration over the latent values is approximated using the Laplace method or expectation propagation (EP). We study...... the properties of several Bayesian leave-one-out (LOO) cross-validation approximations that in most cases can be computed with a small additional cost after forming the posterior approximation given the full data. Our main objective is to assess the accuracy of the approximative LOO cross-validation estimators...

Validation of internal dosimetry protocols based on stochastic method

International Nuclear Information System (INIS)

Mendes, Bruno M.; Fonseca, Telma C.F.; Almeida, Iassudara G.; Trindade, Bruno M.; Campos, Tarcisio P.R.

2015-01-01

Computational phantoms adapted to Monte Carlo codes have been applied successfully in radiation dosimetry fields. NRI research group has been developing Internal Dosimetry Protocols - IDPs, addressing distinct methodologies, software and computational human-simulators, to perform internal dosimetry, especially for new radiopharmaceuticals. Validation of the IDPs is critical to ensure the reliability of the simulations results. Inter comparisons of data from literature with those produced by our IDPs is a suitable method for validation. The aim of this study was to validate the IDPs following such inter comparison procedure. The Golem phantom has been reconfigured to run on MCNP5. The specific absorbed fractions (SAF) for photon at 30, 100 and 1000 keV energies were simulated based on the IDPs and compared with reference values (RV) published by Zankl and Petoussi-Henss, 1998. The SAF average differences from RV and those obtained in IDP simulations was 2.3 %. The SAF largest differences were found in situations involving low energy photons at 30 keV. The Adrenals and thyroid, i.e. the lowest mass organs, had the highest SAF discrepancies towards RV as 7.2 % and 3.8 %, respectively. The statistic differences of SAF applying our IDPs from reference values were considered acceptable at the 30, 100 and 1000 keV spectra. We believe that the main reason for the discrepancies in IDPs run, found in lower masses organs, was due to our source definition methodology. Improvements of source spatial distribution in the voxels may provide outputs more consistent with reference values for lower masses organs. (author)

Validation of internal dosimetry protocols based on stochastic method

Energy Technology Data Exchange (ETDEWEB)

Mendes, Bruno M.; Fonseca, Telma C.F., E-mail: bmm@cdtn.br [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil); Almeida, Iassudara G.; Trindade, Bruno M.; Campos, Tarcisio P.R., E-mail: tprcampos@yahoo.com.br [Universidade Federal de Minas Gerais (DEN/UFMG), Belo Horizonte, MG (Brazil). Departamento de Engenharia Nuclear

2015-07-01

Computational phantoms adapted to Monte Carlo codes have been applied successfully in radiation dosimetry fields. NRI research group has been developing Internal Dosimetry Protocols - IDPs, addressing distinct methodologies, software and computational human-simulators, to perform internal dosimetry, especially for new radiopharmaceuticals. Validation of the IDPs is critical to ensure the reliability of the simulations results. Inter comparisons of data from literature with those produced by our IDPs is a suitable method for validation. The aim of this study was to validate the IDPs following such inter comparison procedure. The Golem phantom has been reconfigured to run on MCNP5. The specific absorbed fractions (SAF) for photon at 30, 100 and 1000 keV energies were simulated based on the IDPs and compared with reference values (RV) published by Zankl and Petoussi-Henss, 1998. The SAF average differences from RV and those obtained in IDP simulations was 2.3 %. The SAF largest differences were found in situations involving low energy photons at 30 keV. The Adrenals and thyroid, i.e. the lowest mass organs, had the highest SAF discrepancies towards RV as 7.2 % and 3.8 %, respectively. The statistic differences of SAF applying our IDPs from reference values were considered acceptable at the 30, 100 and 1000 keV spectra. We believe that the main reason for the discrepancies in IDPs run, found in lower masses organs, was due to our source definition methodology. Improvements of source spatial distribution in the voxels may provide outputs more consistent with reference values for lower masses organs. (author)

RELIABILITY AND VALIDITY OF SUBJECTIVE ASSESSMENT OF LUMBAR LORDOSIS IN CONVENTIONAL RADIOGRAPHY.

Science.gov (United States)

Ruhinda, E; Byanyima, R K; Mugerwa, H

2014-10-01

Reliability and validity studies of different lumbar curvature analysis and measurement techniques have been documented however there is limited literature on the reliability and validity of subjective visual analysis. Radiological assessment of lumbar lordotic curve aids in early diagnosis of conditions even before neurologic changes set in. To ascertain the level of reliability and validity of subjective assessment of lumbar lordosis in conventional radiography. A blinded, repeated-measures diagnostic test was carried out on lumbar spine x-ray radiographs. Radiology Department at Joint Clinical Research Centre (JCRC), Mengo-Kampala-Uganda. Seventy (70) lateral lumbar x-ray films were used for this study and were obtained from the archive of JCRC radiology department at Butikiro house, Mengo-Kampala. Poor observer agreement, both inter- and intra-observer, with kappa values of 0.16 was found. Inter-observer agreement was poorer than intra-observer agreement. Kappa values significantly rose when the lumbar lordosis was clustered into four categories without grading each abnormality. The results confirm that subjective assessment of lumbar lordosis has low reliability and validity. Film quality has limited influence on the observer reliability. This study further shows that fewer scale categories of lordosis abnormalities produce better observer reliability.

Uncertainty of Monetary Valued Ecosystem Services – Value Transfer Functions for Global Mapping

Science.gov (United States)

Schmidt, Stefan; Manceur, Ameur M.; Seppelt, Ralf

2016-01-01

Growing demand of resources increases pressure on ecosystem services (ES) and biodiversity. Monetary valuation of ES is frequently seen as a decision-support tool by providing explicit values for unconsidered, non-market goods and services. Here we present global value transfer functions by using a meta-analytic framework for the synthesis of 194 case studies capturing 839 monetary values of ES. For 12 ES the variance of monetary values could be explained with a subset of 93 study- and site-specific variables by utilizing boosted regression trees. This provides the first global quantification of uncertainties and transferability of monetary valuations. Models explain from 18% (water provision) to 44% (food provision) of variance and provide statistically reliable extrapolations for 70% (water provision) to 91% (food provision) of the terrestrial earth surface. Although the application of different valuation methods is a source of uncertainty, we found evidence that assuming homogeneity of ecosystems is a major error in value transfer function models. Food provision is positively correlated with better life domains and variables indicating positive conditions for human well-being. Water provision and recreation service show that weak ownerships affect valuation of other common goods negatively (e.g. non-privately owned forests). Furthermore, we found support for the shifting baseline hypothesis in valuing climate regulation. Ecological conditions and societal vulnerability determine valuation of extreme event prevention. Valuation of habitat services is negatively correlated with indicators characterizing less favorable areas. Our analysis represents a stepping stone to establish a standardized integration of and reporting on uncertainties for reliable and valid benefit transfer as an important component for decision support. PMID:26938447

School system evaluation by value added analysis under endogeneity.

Science.gov (United States)

Manzi, Jorge; San Martín, Ernesto; Van Bellegem, Sébastien

2014-01-01

Value added is a common tool in educational research on effectiveness. It is often modeled as a (prediction of a) random effect in a specific hierarchical linear model. This paper shows that this modeling strategy is not valid when endogeneity is present. Endogeneity stems, for instance, from a correlation between the random effect in the hierarchical model and some of its covariates. This paper shows that this phenomenon is far from exceptional and can even be a generic problem when the covariates contain the prior score attainments, a typical situation in value added modeling. Starting from a general, model-free definition of value added, the paper derives an explicit expression of the value added in an endogeneous hierarchical linear Gaussian model. Inference on value added is proposed using an instrumental variable approach. The impact of endogeneity on the value added and the estimated value added is calculated accurately. This is also illustrated on a large data set of individual scores of about 200,000 students in Chile.

Inculcation of Values across the School Curriculum: Development and Validation of Teachers' Orientation Scale

Directory of Open Access Journals (Sweden)

Mohamad Sahari

1999-12-01

Full Text Available Teacher orientation to the inculcation of values across school curriculum-a function of the teacher knowledge and attitudes-has been conceptualised as his or her (1 identification with the goals of the curriculum, and (2 conformity with the predetermined instructional behaviours. Based on this framework, the study explored the construct of teacher orientation to the inculcation of values across school subjects. More specifically, the study examined the likelihood of two underlying dimensions explaining the presence of variability in teacher orientation and the reliability of the dimensions. Using a 15-item instrument developed earlier for a descriptive inquiry, the present study measured and analysed responses from 103 secondary school teachers from two randomly selected schools. To arrive at the conclusions, the study applied principal component analysis and Cronbach's alpha procedures. The results suggested that teacher orientation to value inculcation is a multidimensional construct. The more reliable dimensions of Teacher Orientation were found to be goal identification, conformity to planning tasks, and conformity to delivery tasks. The results add new information to, and may serve as a guide for future research.

Validating Machine Learning Algorithms for Twitter Data Against Established Measures of Suicidality.

Science.gov (United States)

Braithwaite, Scott R; Giraud-Carrier, Christophe; West, Josh; Barnes, Michael D; Hanson, Carl Lee

2016-05-16

One of the leading causes of death in the United States (US) is suicide and new methods of assessment are needed to track its risk in real time. Our objective is to validate the use of machine learning algorithms for Twitter data against empirically validated measures of suicidality in the US population. Using a machine learning algorithm, the Twitter feeds of 135 Mechanical Turk (MTurk) participants were compared with validated, self-report measures of suicide risk. Our findings show that people who are at high suicidal risk can be easily differentiated from those who are not by machine learning algorithms, which accurately identify the clinically significant suicidal rate in 92% of cases (sensitivity: 53%, specificity: 97%, positive predictive value: 75%, negative predictive value: 93%). Machine learning algorithms are efficient in differentiating people who are at a suicidal risk from those who are not. Evidence for suicidality can be measured in nonclinical populations using social media data.

[Evaluation of Suicide Risk Levels in Hospitals: Validity and Reliability Tests].

Science.gov (United States)

Macagnino, Sandro; Steinert, Tilman; Uhlmann, Carmen

2018-05-01

Examination of in-hospital suicide risk levels concerning their validity and their reliability. The internal suicide risk levels were evaluated in a cross sectional study of in 163 inpatients. A reliability check was performed via determining interrater-reliability of senior physician, therapist and the responsible nurse. Within the scope of the validity check, we conducted analyses of criterion validity and construct validity. For the total sample an "acceptable" to "good" interrater-reliability (Kendalls W = .77) of suicide risk levels were obtained. Schizophrenic disorders showed the lowest values, for personality disorders we found the highest level of interrater-reliability. When examining the criterion validity, Item-9 of the BDI-II is substantial correlated to our suicide risk levels (ρ m  = .54, p validity check, affective disorders showed the highest correlation (ρ = .77), compatible also with "convergent validity". They differed with schizophrenic disorders which showed the least concordance (ρ = .43). In-hospital suicide risk levels may represent an important contribution to the assessment of suicidal behavior of inpatients experiencing psychiatric treatment due to their overall good validity and reliability. © Georg Thieme Verlag KG Stuttgart · New York.

Cross validation for the classical model of structured expert judgment

International Nuclear Information System (INIS)

Colson, Abigail R.; Cooke, Roger M.

2017-01-01

We update the 2008 TU Delft structured expert judgment database with data from 33 professionally contracted Classical Model studies conducted between 2006 and March 2015 to evaluate its performance relative to other expert aggregation models. We briefly review alternative mathematical aggregation schemes, including harmonic weighting, before focusing on linear pooling of expert judgments with equal weights and performance-based weights. Performance weighting outperforms equal weighting in all but 1 of the 33 studies in-sample. True out-of-sample validation is rarely possible for Classical Model studies, and cross validation techniques that split calibration questions into a training and test set are used instead. Performance weighting incurs an “out-of-sample penalty” and its statistical accuracy out-of-sample is lower than that of equal weighting. However, as a function of training set size, the statistical accuracy of performance-based combinations reaches 75% of the equal weight value when the training set includes 80% of calibration variables. At this point the training set is sufficiently powerful to resolve differences in individual expert performance. The information of performance-based combinations is double that of equal weighting when the training set is at least 50% of the set of calibration variables. Previous out-of-sample validation work used a Total Out-of-Sample Validity Index based on all splits of the calibration questions into training and test subsets, which is expensive to compute and includes small training sets of dubious value. As an alternative, we propose an Out-of-Sample Validity Index based on averaging the product of statistical accuracy and information over all training sets sized at 80% of the calibration set. Performance weighting outperforms equal weighting on this Out-of-Sample Validity Index in 26 of the 33 post-2006 studies; the probability of 26 or more successes on 33 trials if there were no difference between performance

THE FAIR VALUE – REPRESENTATION OF THE MARKET VALUE IN ACCOUNTING. TRENDS AND PERSPECTIVES IN ROMANIAN ACCOUNTING PRACTICE

Directory of Open Access Journals (Sweden)

Marinela-Daniela Manea

2011-06-01

Full Text Available The market value, as a method of measuring the right value, also provides the highest objectivity due to the fact that it is based on information exterior to the entity, impossible to influence in anyway. For the fair value of a product to be equivalent to the market value, a prerequisite needs to be followed: the market must be perfect, namely organized and active. In this case, the evaluation’s type is mark et to market. In certain fields, the active’s market existence is clearly difficult (for instance for the derived products or specialized, unique assets etc. In such situations – imperfect market – we will valorize that specific good by calculating its fair value by using an evaluation technique, an alternative technique in the absence of a price set by the market. There are two possible approaches: the first one belongs to the analogy method; the second approach belongs to valuing an asset using the modeling technique also known as market to model. The method of determining the value of an asset by analogy or similarity is theoretically valid, but in practice this is difficult, since the notion of similar characteristics is often difficult to establish and prove. This article proposes a valuation of the market value concept based on Romanian realities - legal, accounting practices in that area,and taking into account the existing fiscal limitations.

Validity of a jump training apparatus using Wii Balance Board.

Science.gov (United States)

Yamamoto, Keizo; Matsuzawa, Mamoru

2013-05-01

The dynamic quantification of jump ability is useful for sports performance evaluation. We developed a force measurement system using the Wii Balance Board (WBB). This study was conducted to validate the system in comparison with a laboratory-grade force plate (FP). For a static validation, weights of 10-180kg were put progressively on the WBB put on the FP. The vertical component of the ground reaction force (vGRF) was measured using both devices and compared. For the dynamic validation, 10 subjects without lower limb pathology participated in the study and performed vertical jumping twice on the WBB on the FP. The range of analysis was set from the landing after the first jump to taking off of the second jump. The peak values during the landing phase and jumping phase were obtained and the force-time integral (force impulse) was measured. The relations of the values measured using each device were compared using Pearson's correlation coefficient test and Bland-Altman plots (BAP). Significant correlation (P<.01, r=.99) was found between the values of both devices in the static and the dynamic test. Examination of the BAP revealed a proportion error in the landing phase and showed no relation in the jumping phase between the difference and the mean in the dynamic test. The WBB detects the vGRF in the jumping phase with high precision. Copyright © 2012 Elsevier B.V. All rights reserved.

Understanding Project Based Production through Socio-technical Modularity

DEFF Research Database (Denmark)

Thuesen, Christian Langhoff

This paper develops an approach for understanding Project Based Production. This form of production is characterized by unique deliverables, high complexity, high value, high risk, profound uncertainty and many stakeholders and is increasingly important the postmodern society. Common to the pract......This paper develops an approach for understanding Project Based Production. This form of production is characterized by unique deliverables, high complexity, high value, high risk, profound uncertainty and many stakeholders and is increasingly important the postmodern society. Common...... to the practices of PBP and other production practices is the goal of balancing the dilemma between creativity and productivity. In response to industrialized production, the concept of modularity gained popularity for addressing this dilemma by exploring product, process and organization structures. However...... with the starting point in system theory and a strong bias towards industrial production, the predominant understanding of modularity faces difficulty in explaining practices of Project Based Production in both social – technical and dynamic – stable aspects. Illustrated by a case the paper addresses this gap...

Validation of NAA Method for Urban Particulate Matter

International Nuclear Information System (INIS)

Woro Yatu Niken Syahfitri; Muhayatun; Diah Dwiana Lestiani; Natalia Adventini

2009-01-01

Nuclear analytical techniques have been applied in many countries for determination of environmental pollutant. Method of NAA (neutron activation analysis) representing one of nuclear analytical technique of that has low detection limits, high specificity, high precision, and accuracy for large majority of naturally occurring elements, and ability of non-destructive and simultaneous determination of multi-elemental, and can handle small sample size (< 1 mg). To ensure quality and reliability of the method, validation are needed to be done. A standard reference material, SRM NIST 1648 Urban Particulate Matter, has been used to validate NAA method. Accuracy and precision test were used as validation parameters. Particulate matter were validated for 18 elements: Ti, I, V, Br, Mn, Na, K, Cl, Cu, Al, As, Fe, Co, Zn, Ag, La, Cr, and Sm,. The result showed that the percent relative standard deviation of the measured elemental concentrations are found to be within ranged from 2 to 14,8% for most of the elements analyzed whereas Hor rat value in range 0,3-1,3. Accuracy test results showed that relative bias ranged from -11,1 to 3,6%. Based on validation results, it can be stated that NAA method is reliable for characterization particulate matter and other similar matrix samples to support air quality monitoring. (author)

Enhancing High Value Care in Gastroenterology Practice.

Science.gov (United States)

Camilleri, Michael; Katzka, David A

2016-10-01

The objective of this review is to identify common areas in gastroenterology practice where studies performed provide an opportunity for enhancing value or lowering costs. We provide examples of topics in gastroenterology where clinicians could enhance value by either using less invasive testing, choosing a single best test, or by using patient symptoms to guide additional testing. The topics selected for review are selected in esophageal, pancreatic, and colorectal cancer; functional gastrointestinal diseases (irritable bowel syndrome, bacterial overgrowth, constipation); immune-mediated gastrointestinal diseases; and pancreaticobiliary pathology. We propose guidance to alter practice based on current evidence. These studies support the need to review current practice and to continue performing research to further validate the proposed guidance to enhance value of care in gastroenterology and hepatology. Copyright © 2016 AGA Institute. Published by Elsevier Inc. All rights reserved.

Benchmark validation of statistical models: Application to mediation analysis of imagery and memory.

Science.gov (United States)

MacKinnon, David P; Valente, Matthew J; Wurpts, Ingrid C

2018-03-29

This article describes benchmark validation, an approach to validating a statistical model. According to benchmark validation, a valid model generates estimates and research conclusions consistent with a known substantive effect. Three types of benchmark validation-(a) benchmark value, (b) benchmark estimate, and (c) benchmark effect-are described and illustrated with examples. Benchmark validation methods are especially useful for statistical models with assumptions that are untestable or very difficult to test. Benchmark effect validation methods were applied to evaluate statistical mediation analysis in eight studies using the established effect that increasing mental imagery improves recall of words. Statistical mediation analysis led to conclusions about mediation that were consistent with established theory that increased imagery leads to increased word recall. Benchmark validation based on established substantive theory is discussed as a general way to investigate characteristics of statistical models and a complement to mathematical proof and statistical simulation. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Construct Validity and Case Validity in Assessment

Science.gov (United States)

Teglasi, Hedwig; Nebbergall, Allison Joan; Newman, Daniel

2012-01-01

Clinical assessment relies on both "construct validity", which focuses on the accuracy of conclusions about a psychological phenomenon drawn from responses to a measure, and "case validity", which focuses on the synthesis of the full range of psychological phenomena pertaining to the concern or question at hand. Whereas construct validity is…

Enhancing Established Counting Routines to Promote Place-Value Understanding: An Empirical Study in Early Elementary Classrooms

Science.gov (United States)

Fraivillig, Judith L.

2018-01-01

Understanding place value is a critical and foundational competency for elementary mathematics. Classroom teachers who endeavor to promote place-value development adopt a variety of established practices to varying degrees of effectiveness. In parallel, researchers have validated models of how young children acquire place-value understanding.…

Validation of 2 commercial Neospora caninum antibody enzyme linked immunosorbent assays

Science.gov (United States)

Wu, John T.Y.; Dreger, Sally; Chow, Eva Y.W.; Bowlby, Evelyn E.

2002-01-01

Abstract This is a validation study of 2 commercially available enzyme linked immunosorbent assays (ELISA) for the detection of antibodies against Neospora caninum in bovine serum. The results of the reference sera (n = 30) and field sera from an infected beef herd (n = 150) were tested by both ELISAs and the results were compared statistically. When the immunoblotting results of the reference bovine sera were compared to the ELISA results, the same identity score (96.67%) and kappa values (K) (0.93) were obtained for both ELISAs. The sensitivity and specificity values for the IDEXX test were 100% and 93.33% respectively. For the Biovet test 93.33% and 100% were obtained. The corresponding positive (PV+) and negative predictive (PV−) values for the 2 assays were 93.75% and 100% (IDEXX), and 100% and 93.75% (Biovet). In the 2nd study, competitive inhibition ELISA (c-ELISA) results on bovine sera from an infected herd were compared to the 2 sets of ELISA results. The identity scores of the 2 ELISAs were 98% (IDEXX) and 97.33% (Biovet). The K values calculated were 0.96 (IDEXX) and 0.95 (Biovet). For the IDEXX test the sensitivity and specificity were 97.56% and 98.53%, whereas for the Biovet assay 95.12% and 100% were recorded, respectively. The corresponding PV+ and PV− values were 98.77% and 97.1% (IDEXX), and 100% and 94.44% (Biovet). Our validation results showed that the 2 ELISAs worked equally well and there was no statistically significant difference between the performance of the 2 tests. Both tests showed high reproducibility, repeatability and substantial agreement with results from 2 other laboratories. A quality assurance based on the requirement of the ISO/IEC 17025 standards has been adopted throughout this project for test validation procedures. PMID:12418782

Establishment of Valid Laboratory Case Definition for Human Leptospirosis

NARCIS (Netherlands)

M.G.A. Goris (Marga); M.M.G. Leeflang (Mariska); K.R. Boer (Kimberly); M. Goeijenbier (Marco); E.C.M. van Gorp (Eric); J.F.P. Wagenaar (Jiri); R.A. Hartskeerl (Rudy)

2011-01-01

textabstractLaboratory case definition of leptospirosis is scarcely de ned by a solid evaluation that determines cut-off values in the tests that are applied. This study describes the process of determining optimal cut-off titers of laboratory tests for leptospirosis for a valid case definition of

The Predictive Value of Germline Polymorphisms in Patients with NSCLC

DEFF Research Database (Denmark)

Nygaard, Anneli Dowler; Spindler, Karen-Lise Garm; Andersen, Rikke Fredslund

2010-01-01

urgently needed. Single Nucleotide Polymorphisms (SNPs) are stable markers of potential clinical value and the study aimed at evaluating their use in lung cancer patients given standard chemotherapy. Genomic DNA was extracted from a pre-treatment blood sample drawn from patients with advanced Non....... Haplotypes were estimated and analyzed when relevant. There were no significant associations between SNPs in the EGF system or the DNA-repair system and RR, PFS or OS. In contrast, the VEGF+405, VEGF-460 and VEGF-2579, heterozygous patients had a higher response rate and longer PFS than homozygous patients....... Haplotype analysis of the VEGF+405 and VEGF- 460 supported our findings. These results were, however, not confirmed in the validation cohort. Although significant results regarding VEGF related SNPs, in the primary analysis, no predictive value of a broad panel of SNPs in NSCLC was found in the validation...

Extracting and analyzing ejection fraction values from electronic echocardiography reports in a large health maintenance organization.

Science.gov (United States)

Xie, Fagen; Zheng, Chengyi; Yuh-Jer Shen, Albert; Chen, Wansu

2017-12-01

The left ventricular ejection fraction value is an important prognostic indicator of cardiovascular outcomes including morbidity and mortality and is often used clinically to indicate severity of heart disease. However, it is usually reported in free-text echocardiography reports. We developed and validated a computerized algorithm to extract ejection fraction values from echocardiography reports and applied the algorithm to a large volume of unstructured echocardiography reports between 1995 and 2011 in a large health maintenance organization. A total of 621,856 echocardiography reports with a description of ejection fraction values or systolic functions were identified, of which 70 percent contained numeric ejection fraction values and the rest (30%) were text descriptions explicitly indicating the systolic left ventricular function. The 12.1 percent (16.0% for male and 8.4% for female) of these extracted ejection fraction values are <45 percent. Validation conducted based on a random sample of 200 reports yielded 95.0 percent sensitivity and 96.9 percent positive predictive value.

Validity of a cross-specialty test in basic laparoscopic techniques (TABLT)

DEFF Research Database (Denmark)

Thinggaard, Ebbe; Bjerrum, Flemming; Strandbygaard, Jeanett

2015-01-01

. The aim of this study was to establish validity evidence for the Training and Assessment of Basic Laparoscopic Techniques (TABLT) test, a tablet-based training system. METHODS: Laparoscopic surgeons and trainees were recruited from departments of general surgery, gynaecology and urology. Participants...... included novice, intermediate and experienced surgeons. All participants performed the TABLT test. Performance scores were calculated based on time taken and errors made. Evidence of validity was explored using a contemporary framework of validity. RESULTS: Some 60 individuals participated. The TABLT...... was shown to be reliable, with an intraclass correlation coefficient of 0·99 (P value of 0·73 (P 

Validity of Willingness to Pay Measures under Preference Uncertainty.

Science.gov (United States)

Braun, Carola; Rehdanz, Katrin; Schmidt, Ulrich

2016-01-01

Recent studies in the marketing literature developed a new method for eliciting willingness to pay (WTP) with an open-ended elicitation format: the Range-WTP method. In contrast to the traditional approach of eliciting WTP as a single value (Point-WTP), Range-WTP explicitly allows for preference uncertainty in responses. The aim of this paper is to apply Range-WTP to the domain of contingent valuation and to test for its theoretical validity and robustness in comparison to the Point-WTP. Using data from two novel large-scale surveys on the perception of solar radiation management (SRM), a little-known technique for counteracting climate change, we compare the performance of both methods in the field. In addition to the theoretical validity (i.e. the degree to which WTP values are consistent with theoretical expectations), we analyse the test-retest reliability and stability of our results over time. Our evidence suggests that the Range-WTP method clearly outperforms the Point-WTP method.

Validity of Willingness to Pay Measures under Preference Uncertainty.

Directory of Open Access Journals (Sweden)

Carola Braun

Full Text Available Recent studies in the marketing literature developed a new method for eliciting willingness to pay (WTP with an open-ended elicitation format: the Range-WTP method. In contrast to the traditional approach of eliciting WTP as a single value (Point-WTP, Range-WTP explicitly allows for preference uncertainty in responses. The aim of this paper is to apply Range-WTP to the domain of contingent valuation and to test for its theoretical validity and robustness in comparison to the Point-WTP. Using data from two novel large-scale surveys on the perception of solar radiation management (SRM, a little-known technique for counteracting climate change, we compare the performance of both methods in the field. In addition to the theoretical validity (i.e. the degree to which WTP values are consistent with theoretical expectations, we analyse the test-retest reliability and stability of our results over time. Our evidence suggests that the Range-WTP method clearly outperforms the Point-WTP method.

Examining the construct validity of the positive coping behavioural inventory

Directory of Open Access Journals (Sweden)

Melinde Coetzee

2017-09-01

  Research purpose: The present study examined the usefulness and validity of the factor structure of the positive coping behavioural inventory (PCBI with the view to further refine the scale and increase its usefulness and application value in the South African workplace. Motivation for the study: Valid and reliable multidimensional measures of positive psychological constructs are considered important in understanding the array of personal resources that help employees cope constructively with work–life stressors in today’s fastpaced and more turbulent work environment. Research design, approach and method: A cross-sectional survey design was utilised to collect primary data from a sample of (N = 525 male and female employees from white and black ethnicity origin in the services industry. The participants’ self-evaluations of their positive coping behaviour were measured by means of the PCBI. Confirmatory factor analysis was performed to examine the construct validity of the PCBI. Main findings: The convergent validity and internal consistency reliability of the PCBI as a measure of three higher-order dimensions of positive coping behaviour (inventive, engaging and intentional coping behaviours were demonstrated in this study. Practical and managerial implications: Researchers may confidently use the three-factor solution of the PCBI to measure employees’ self-evaluations of their capacity to demonstrate positive coping behaviour in the workplace. Contribution and value-add: This study contributed to the emerging body of knowledge on the assessment of positive psychology constructs that contribute to employees’ well-being and flourishing in the South African workplace. The results provide preliminary evidence of the usefulness of the PCBI as a valid and reliable multidimensional measure that integrates a wide array of positive psychology attributes in a single measure.

Something of value Governance of Projects in the Project-Based Organisation

DEFF Research Database (Denmark)

Riis, Eva

2013-01-01

The paper presents a conceptual framework for studying Governance of Projects and issues of value in the project-based organisation. Attempts at exploring and conceptualising the issues in the current literature are reviewed. Issues pertinent to gaining value by Governance of Projects have mainly...... for a better understanding of Governance of Projects and value contribution. The findings presented here form the conceptual foundation for subsequent empirical studies of value by Governance of Projects....... been explored from the perspective of economic theory. Models found in the literature are not typically concerned with value for the implementing organisation as a whole; their scope is limited to the time just after project completion. No valid, empirically-based models of value creation by Governance...

Exact finite volume expectation values of local operators in excited states

Energy Technology Data Exchange (ETDEWEB)

Pozsgay, B. [MTA-BME “Momentum” Statistical Field Theory Research Group,Budafoki út 8, 1111 Budapest (Hungary); Szécsényi, I.M. [Department of Mathematical Sciences, Durham University, South Road, Durham, DH1 3LE (United Kingdom); Institute of Theoretical Physics, Eötvös Loránd University,Pázmány Péter sétány 1/A, 1117 Budapest (Hungary); Takács, G. [MTA-BME “Momentum” Statistical Field Theory Research Group,Budafoki út 8, 1111 Budapest (Hungary); Department of Theoretical Physics, Budapest University of Technology and Economics,Budafoki út 8, 1111 Budapest (Hungary)

2015-04-07

We present a conjecture for the exact expression of finite volume expectation values in excited states in integrable quantum field theories, which is an extension of an earlier conjecture to the case of general diagonal factorized scattering with bound states and a nontrivial bootstrap structure. The conjectured expression is a spectral expansion which uses the exact form factors and the excited state thermodynamic Bethe Ansatz as building blocks. The conjecture is proven for the case of the trace of the energy-moment tensor. Concerning its validity for more general operators, we provide numerical evidence using the truncated conformal space approach. It is found that the expansion fails to be well-defined for small values of the volume in cases when the singularity structure of the TBA equations undergoes a non-trivial rearrangement under some critical value of the volume. Despite these shortcomings, the conjectured expression is expected to be valid for all volumes for most of the excited states, and as an expansion above the critical volume for the rest.

Exact finite volume expectation values of local operators in excited states

International Nuclear Information System (INIS)

Pozsgay, B.; Szécsényi, I.M.; Takács, G.

2015-01-01

We present a conjecture for the exact expression of finite volume expectation values in excited states in integrable quantum field theories, which is an extension of an earlier conjecture to the case of general diagonal factorized scattering with bound states and a nontrivial bootstrap structure. The conjectured expression is a spectral expansion which uses the exact form factors and the excited state thermodynamic Bethe Ansatz as building blocks. The conjecture is proven for the case of the trace of the energy-moment tensor. Concerning its validity for more general operators, we provide numerical evidence using the truncated conformal space approach. It is found that the expansion fails to be well-defined for small values of the volume in cases when the singularity structure of the TBA equations undergoes a non-trivial rearrangement under some critical value of the volume. Despite these shortcomings, the conjectured expression is expected to be valid for all volumes for most of the excited states, and as an expansion above the critical volume for the rest.

Increasing Personal Value Congruence in Computerized Decision Support Using System Feedback

Directory of Open Access Journals (Sweden)

Bryan Hosack

2014-02-01

Full Text Available The Theory of Universals in Values (TUV, a reliable and validated conceptualization of personal values used in psychology, is used to examine the effect of system feedback delivered by a Decision Support System (DSS on personal values. The results indicate that value-based decision-making behavior can be influenced by DSS feedback to address value congruence in decision-making. User behavior was shown to follow the outcomes expected by operant theory when feedback was supportive and to follow the outcomes of reactance theory when feedback was challenging. This result suggests that practitioners and Information System (IS researchers should consider user values when designing computerized decision feedback to adjust a system’s design such that the potential user backlash is avoided or congruence between organizational and personal values is achieved.

Assessing the Value of Real-life Brands in Virtual Worlds

DEFF Research Database (Denmark)

Mattsson, Jan; Barnes, Stuart; Hartley, Nicole

2015-01-01

World. A key finding is the difficulty in creating emotional brand value in Second Life which has serious implications for the sustainability of current real-life brands in Virtual Worlds. The paper rounds off with conclusions and implications for future research and practice in this very new area.......Virtual Worlds are a significant new market environment for brand-building through experiential customer service interactions. Using value theory, this paper aims to assess the experiential brand value of real-life brands that have moved to the Virtual World of Second Life. A key premise...... is that current brand offerings in Virtual Worlds do not offer consumers adequate experiential value. The results demonstrate both the validity of an axiological approach to examining brand value, and highlight significant problems in consumer perceptions of the experiential value of brands within the Virtual...

REVISITING SCHEIN (1965 STUDY ON THE MANAGERIAL VALUES AND ATTITUDES OF MBA STUDENTS

Directory of Open Access Journals (Sweden)

A. Gonul Demirel

2015-04-01

Full Text Available As schools are organized networks of socializing experiences which prepare individuals to act in society, MBA programs are the socializing media to prepare the future managers. Our study is “a partial replication” of the study done by Schein (1965. The same constructs are used in the questionnaire of the present study. Assuming that what is valued by managers influences how those individuals make business decisions, we aim to find out the managerial values and attitudes of MBA students. We also aim to draw the attention of the faculty members to think about what attitudes, beliefs, and values MBA students are learning and what might the faculty contributions be to the transfer of managerial values. Therefore, the main question of our study is “What are the major managerial values and attitudes of our MBA students?” A second intended contribution of this study is the validation of the scales. The goal of science is empirical generalization, or knowledge development. Systematically conducted replications with extensions facilitate this goal. Keeping this in mind our reconsidering the original constructs of the Schein (1965 study contributes to the validation of at least some of these original constructs.

Normative values for a functional capacity evaluation.

Science.gov (United States)

Soer, Remko; van der Schans, Cees P; Geertzen, Jan H; Groothoff, Johan W; Brouwer, Sandra; Dijkstra, Pieter U; Reneman, Michiel F

2009-10-01

Soer R, van der Schans CP, Geertzen JH, Groothoff JW, Brouwer S, Dijkstra PU, Reneman MF. Normative values for a functional capacity evaluation. To establish normative values for a functional capacity evaluation (FCE) of healthy working subjects. Descriptive. Rehabilitation center. Healthy working subjects (N=701; 448 men, 253 women) between 20 and 60 years of age, working in more than 180 occupations. Subjects performed a 2-hour FCE consisting of 12 work-related tests. Subjects were classified into categories based on physical demands according to the Dictionary of Occupational Titles. Means, ranges, SDs, and percentiles were provided for normative values of FCE, and a regression analysis for outcome of the 12 tests was performed. Normative FCE values were established for 4 physical demand categories. The normative values enable comparison of patients' performances to these values. If a patient's performance exceeds the lowest scores in his/her corresponding demand category, then the patient's capacity is very likely to be sufficient to meet the workload. Further, clinicians can make more precise return-to-work recommendations and set goals for rehabilitation programs. A comparison of the normative values can be useful to the fields of rehabilitation, occupational, and insurance medicine. Further research is needed to test the validity of the normative values with respect to workplace assessments and return-to-work recommendations.

Validation of satellite-derived tropical cyclone heat potential with in situ observations in the North Indian Ocean

Digital Repository Service at National Institute of Oceanography (India)

Nagamani, P.V.; Ali, M.M.; Goni, G.J.; Dinezio, P.N.; Pezzullo, J.C.; UdayaBhaskar, T.V.S.; Gopalakrishna, V.V.; Nisha, K.

validation with in situ estimations for quantification of their reliability and consistency. Once the validation has been carried out, the satellite-derived TCHP values with their improved tempo- ral and spatial properties can be conveniently used...

Internal Cluster Validation on Earthquake Data in the Province of Bengkulu

Science.gov (United States)

Rini, D. S.; Novianti, P.; Fransiska, H.

2018-04-01

K-means method is an algorithm for cluster n object based on attribute to k partition, where k < n. There is a deficiency of algorithms that is before the algorithm is executed, k points are initialized randomly so that the resulting data clustering can be different. If the random value for initialization is not good, the clustering becomes less optimum. Cluster validation is a technique to determine the optimum cluster without knowing prior information from data. There are two types of cluster validation, which are internal cluster validation and external cluster validation. This study aims to examine and apply some internal cluster validation, including the Calinski-Harabasz (CH) Index, Sillhouette (S) Index, Davies-Bouldin (DB) Index, Dunn Index (D), and S-Dbw Index on earthquake data in the Bengkulu Province. The calculation result of optimum cluster based on internal cluster validation is CH index, S index, and S-Dbw index yield k = 2, DB Index with k = 6 and Index D with k = 15. Optimum cluster (k = 6) based on DB Index gives good results for clustering earthquake in the Bengkulu Province.

Cadmium risks to freshwater life: derivation and validation of low-effect criteria values using laboratory and field studies

Science.gov (United States)

Mebane, Christopher A.

2006-01-01

' criterion) was calculated as 0.75 mug/L cadmium using the hardness-dependent equation CMC = e(0.8403 ? ln(hardness)-3.572) where the 'ln hardness' is the natural logarithm of the water hardness. Likewise, the criterion continuous concentration (CCC, or 'chronic' criterion) was calculated as 0.37 mug/L cadmium using the hardness-dependent equation CCC = (e(0.6247 ? ln(hardness)-3.384)) ? (1.101672 - ((ln hardness) ? 0.041838))). Using data that were independent of those used to derive the criteria, the criteria concentrations were evaluated to estimate whether adverse effects were expected to the biological integrity of natural waters or to selected species listed as threatened or endangered. One species was identified that would not be fully protected by the derived CCC, the amphipod Hyalella azteca. Exposure to CCC conditions likely would lead to population decreases in Hyalella azteca, the food web consequences of which probably would be slight if macroinvertebrate communities were otherwise diverse. Some data also suggested adverse behavioral changes are possible in fish following long-term exposures to low levels of cadmium, particularly in char (genus Salvelinus). Although ambiguous, these data indicate a need to periodically review the literature on behavioral changes in fish following metals exposure as more information becomes available. Most data reviewed indicated that criteria conditions were unlikely to contribute to overt adverse effects to either biological integrity or listed species. If elevated cadmium concentrations that approach the chronic criterion values occur in ambient waters, careful biological monitoring of invertebrate and fish assemblages would be prudent to validate the prediction that the assemblages would not be adversely affected by cadmium at criterion concentrations.

Saph Pani deliverables

OpenAIRE

Saph Pani

2016-01-01

Summary Saph Pani was an India-EU collaborative project with a duration of three years. The project aimed to improve natural water treatment systems such as bank filtration (BF), managed aquifer recharge (MAR) and natural treatment systems (NTS) for wastewater treatment (e.g. constructed wetlands) in India by building on a combination of local and international expertise. An enhancement of water resources and water supply, particularly in water stressed urban and peri-urban areas was targ...

Deliverable 2.2

DEFF Research Database (Denmark)

Tarabanis, Konstantinos; Efthimios, Tambouris; Zotou, Maria

2016-01-01

etc. The report also presents the OD-PBL design pathway, which is a further development of the OD-PBL methodological recommendations presented in the D2.1. This design pathway aims to guide educators when designing learning processes that aim to teach OD by utilizing the PBL learning strategy......The work carried out resulted in the description of the LA field and in the presentation of a total of 18 LA tools that can analyse educational data that can be utilized in the project to support multiple PBL aspects, such as feedback, reflection, self-driven learning, collaboration, application....... The pathway consists of 6 main steps, i.e. Analysis, Gathering of inputs, Design, Development, Implementation and Reflection. Each step provides guidelines on how to plan an OD course and learning processes, and combines all previous project results from D1.1, D1.2, D1.3 and D2.1. Finally, the report presents...

Discriminant Validity Assessment: Use of Fornell & Larcker criterion versus HTMT Criterion

Science.gov (United States)

Hamid, M. R. Ab; Sami, W.; Mohmad Sidek, M. H.

2017-09-01

Assessment of discriminant validity is a must in any research that involves latent variables for the prevention of multicollinearity issues. Fornell and Larcker criterion is the most widely used method for this purpose. However, a new method has emerged for establishing the discriminant validity assessment through heterotrait-monotrait (HTMT) ratio of correlations method. Therefore, this article presents the results of discriminant validity assessment using these methods. Data from previous study was used that involved 429 respondents for empirical validation of value-based excellence model in higher education institutions (HEI) in Malaysia. From the analysis, the convergent, divergent and discriminant validity were established and admissible using Fornell and Larcker criterion. However, the discriminant validity is an issue when employing the HTMT criterion. This shows that the latent variables under study faced the issue of multicollinearity and should be looked into for further details. This also implied that the HTMT criterion is a stringent measure that could detect the possible indiscriminant among the latent variables. In conclusion, the instrument which consisted of six latent variables was still lacking in terms of discriminant validity and should be explored further.

Validation of the Beck Hopelessness Scale in patients with suicide risk.

Science.gov (United States)

Rueda-Jaimes, German Eduardo; Castro-Rueda, Vanessa Alexandra; Rangel-Martínez-Villalba, Andrés Mauricio; Moreno-Quijano, Catalina; Martinez-Salazar, Gustavo Adolfo; Camacho, Paul Anthony

Only a few scales have been validated in Spanish for the assessment of suicide risk, and none of them have achieved predictive validity. To determine the validity and reliability of the Beck Hopelessness Scale in patients with suicide risk attending the specialist clinic. The Beck Hopelessness Scale, reasons for living inventory, and the suicide behaviour questionnaire were applied in patients with suicide risk attending the psychiatric clinic and the emergency department. A new assessment was made 30 days later to determine the predictive validity of suicide or suicide attempt. The evaluation included a total of 244 patients, with a mean age of 30.7±13.2 years, and the majority were women. The internal consistency was .9 (Kuder-Richardson formula 20). Four dimensions were found which accounted for 50% of the variance. It was positively correlated with the suicidal behaviour questionnaire (Spearman .48, P<.001), number of suicide attempts (Spearman .25, P<.001), severity of suicide risk (Spearman .23, P<.001). The correlation with the reasons for living inventory was negative (Spearman -.52, P<.001). With a cut-off ≥12, the negative predictive value was 98.4% (95% CI: 94.2-99.8), and the positive predictive value was 14.8% (95% CI: 6.6-27.1). The Beck Hopelessness Scale in Colombian patients with suicidality shows results similar to the original version, with adequate reliability and moderate concurrent and predictive validity. Copyright © 2016 SEP y SEPB. Publicado por Elsevier España, S.L.U. All rights reserved.

Why do we buy luxury experiences?: Measuring value perceptions of luxury hospitality services

OpenAIRE

Mattila, Anna S.; Yang, Wan

2015-01-01

Abstract The luxury segment of the hospitality industry has experienced substantial growth in the past decade. Unfortunately, the notion of perceived luxury values has received scant attention, and there is a lack of a valid framework to capture consumers' value perceptions in the context of luxury hospitality services. Using luxury restaurant as an example of luxury hospitality services, this paper aims to establish the structure of luxury hospitality values and their measures and to inve...

Is BMI a valid measure of obesity in postmenopausal women?

Science.gov (United States)

Banack, Hailey R; Wactawski-Wende, Jean; Hovey, Kathleen M; Stokes, Andrew

2018-03-01

Body mass index (BMI) is a widely used indicator of obesity status in clinical settings and population health research. However, there are concerns about the validity of BMI as a measure of obesity in postmenopausal women. Unlike BMI, which is an indirect measure of obesity and does not distinguish lean from fat mass, dual-energy x-ray absorptiometry (DXA) provides a direct measure of body fat and is considered a gold standard of adiposity measurement. The goal of this study is to examine the validity of using BMI to identify obesity in postmenopausal women relative to total body fat percent measured by DXA scan. Data from 1,329 postmenopausal women participating in the Buffalo OsteoPerio Study were used in this analysis. At baseline, women ranged in age from 53 to 85 years. Obesity was defined as BMI ≥ 30 kg/m and body fat percent (BF%) greater than 35%, 38%, or 40%. We calculated sensitivity, specificity, positive predictive value, and negative predictive value to evaluate the validity of BMI-defined obesity relative BF%. We further explored the validity of BMI relative to BF% using graphical tools, such as scatterplots and receiver-operating characteristic curves. Youden's J index was used to determine the empirical optimal BMI cut-point for each level of BF% defined obesity. The sensitivity of BMI-defined obesity was 32.4% for 35% body fat, 44.6% for 38% body fat, and 55.2% for 40% body fat. Corresponding specificity values were 99.3%, 97.1%, and 94.6%, respectively. The empirical optimal BMI cut-point to define obesity is 24.9 kg/m for 35% BF, 26.49 kg/m for 38% BF, and 27.05 kg/m for 40% BF according to the Youden's index. Results demonstrate that a BMI cut-point of 30 kg/m does not appear to be an appropriate indicator of true obesity status in postmenopausal women. Empirical estimates of the validity of BMI from this study may be used by other investigators to account for BMI-related misclassification in older women.

[Design and validation of an oral health questionnaire for preoperative anaesthetic evaluation].

Science.gov (United States)

Ruíz-López Del Prado, Gema; Blaya-Nováková, Vendula; Saz-Parkinson, Zuleika; Álvarez-Montero, Óscar Luis; Ayala, Alba; Muñoz-Moreno, Maria Fe; Forjaz, Maria João

Dental injuries incurred during endotracheal intubation are more frequent in patients with previous oral pathology. The study objectives were to develop an oral health questionnaire for preanaesthesia evaluation, easy to apply for personnel without special dental training; and establish a cut-off value for detecting persons with poor oral health. Validation study of a self-administered questionnaire, designed according to a literature review and an expert group's recommendations. The questionnaire was applied to a sample of patients evaluated in a preanaesthesia consultation. Rasch analysis of the questionnaire psychometric properties included viability, acceptability, content validity and reliability of the scale. The sample included 115 individuals, 50.4% of men, with a median age of 58 years (range: 38-71). The final analysis of 11 items presented a Person Separation Index of 0.861 and good adjustment of data to the Rasch model. The scale was unidimensional and its items were not biased by sex, age or nationality. The oral health linear measure presented good construct validity. The cut-off value was set at 52 points. The questionnaire showed sufficient psychometric properties to be considered a reliable tool, valid for measuring the state of oral health in preoperative anaesthetic evaluations. Copyright © 2016 Sociedade Brasileira de Anestesiologia. Publicado por Elsevier Editora Ltda. All rights reserved.

Design and validation of an oral health questionnaire for preoperative anaesthetic evaluation

Directory of Open Access Journals (Sweden)

Gema Ruíz-López del Prado

Full Text Available Abstract Background and objectives: Dental injuries incurred during endotracheal intubation are more frequent in patients with previous oral pathology. The study objectives were to develop an oral health questionnaire for preanaesthesia evaluation, easy to apply for personnel without special dental training; and establish a cut-off value for detecting persons with poor oral health. Methods: Validation study of a self-administered questionnaire, designed according to a literature review and an expert group's recommendations. The questionnaire was applied to a sample of patients evaluated in a preanaesthesia consultation. Rasch analysis of the questionnaire psychometric properties included viability, acceptability, content validity and reliability of the scale. Results: The sample included 115 individuals, 50.4% of men, with a median age of 58 years (range: 38-71. The final analysis of 11 items presented a Person Separation Index of 0.861 and good adjustment of data to the Rasch model. The scale was unidimensional and its items were not biased by sex, age or nationality. The oral health linear measure presented good construct validity. The cut-off value was set at 52 points. Conclusions: The questionnaire showed sufficient psychometric properties to be considered a reliable tool, valid for measuring the state of oral health in preoperative anaesthetic evaluations.

Validity test and its consistency in the construction of patient loyalty model

Science.gov (United States)

Yanuar, Ferra

2016-04-01

The main objective of this present study is to demonstrate the estimation of validity values and its consistency based on structural equation model. The method of estimation was then implemented to an empirical data in case of the construction the patient loyalty model. In the hypothesis model, service quality, patient satisfaction and patient loyalty were determined simultaneously, each factor were measured by any indicator variables. The respondents involved in this study were the patients who ever got healthcare at Puskesmas in Padang, West Sumatera. All 394 respondents who had complete information were included in the analysis. This study found that each construct; service quality, patient satisfaction and patient loyalty were valid. It means that all hypothesized indicator variables were significant to measure their corresponding latent variable. Service quality is the most measured by tangible, patient satisfaction is the most mesured by satisfied on service and patient loyalty is the most measured by good service quality. Meanwhile in structural equation, this study found that patient loyalty was affected by patient satisfaction positively and directly. Service quality affected patient loyalty indirectly with patient satisfaction as mediator variable between both latent variables. Both structural equations were also valid. This study also proved that validity values which obtained here were also consistence based on simulation study using bootstrap approach.

Design and validation of an oral health questionnaire for preoperative anaesthetic evaluation.

Science.gov (United States)

Ruíz-López Del Prado, Gema; Blaya-Nováková, Vendula; Saz-Parkinson, Zuleika; Álvarez-Montero, Óscar Luis; Ayala, Alba; Muñoz-Moreno, Maria Fe; Forjaz, Maria João

Dental injuries incurred during endotracheal intubation are more frequent in patients with previous oral pathology. The study objectives were to develop an oral health questionnaire for preanaesthesia evaluation, easy to apply for personnel without special dental training; and establish a cut-off value for detecting persons with poor oral health. Validation study of a self-administered questionnaire, designed according to a literature review and an expert group's recommendations. The questionnaire was applied to a sample of patients evaluated in a preanaesthesia consultation. Rasch analysis of the questionnaire psychometric properties included viability, acceptability, content validity and reliability of the scale. The sample included 115 individuals, 50.4% of men, with a median age of 58 years (range: 38-71). The final analysis of 11 items presented a Person Separation Index of 0.861 and good adjustment of data to the Rasch model. The scale was unidimensional and its items were not biased by sex, age or nationality. The oral health linear measure presented good construct validity. The cut-off value was set at 52 points. The questionnaire showed sufficient psychometric properties to be considered a reliable tool, valid for measuring the state of oral health in preoperative anaesthetic evaluations. Copyright © 2016 Sociedade Brasileira de Anestesiologia. Published by Elsevier Editora Ltda. All rights reserved.

Spatial and Semantic Validation of Secondary Food Source Data

DEFF Research Database (Denmark)

Lyseen, Anders Knørr; Hansen, Henning Sten

2014-01-01

Governmental and commercial lists of food retailers are often used to measure food environments and foodscapes for health and nutritional research. Information about the validity of such secondary food source data is relevant to understanding the potential and limitations of its application....... This study assesses the validity of two government lists of food retailer locations and types by comparing them to direct field observations, including an assessment of whether pre-classification of the directories can reduce the need for field observation. Lists of food retailers were obtained from......-classification was measured through the calculation of PPV, sensitivity and negative prediction value (NPV). The application of either CVR or Smiley as a measure of the food environment would result in a misrepresentation. The pre-classification based on the food retailer names was found to be a valid method for identifying...

Validity of dementia diagnoses in the danish hospital registers

DEFF Research Database (Denmark)

Phung, T.K.T.; Andersen, B.B.; Phung, T.K.T.

2007-01-01

.24-0.48). Conclusion: The validity of dementia syndrome in the Danish hospital registers was high and allows for epidemiological studies about dementia. Alzheimer's disease, although underregistered, also had a good validity once the diagnosis was registered. In general, other ICD-10 dementia subtypes in the registers......Background:The validity of dementia diagnoses in the Danish nationwide hospital registers was evaluated to determine the value of these registers in epidemiological research about dementia. Methods: Two hundred patients were randomly selected from 4,682 patients registered for the first time...... with a dementia diagnosis in the last 6 months of 2003. The patients' medical journals were reviewed to evaluate if they fulfilled ICD-10 and/or DSM-IV criteria for dementia and specific dementia subtypes. The patients who were still alive in 2006 were invited to an interview. Results: One hundred and ninety...

The management of production value stream factors in a foundry

Directory of Open Access Journals (Sweden)

S. Borkowski

2010-01-01

Full Text Available Connection of two value streams: production and human resources were proposed as a new approach to the production process. To assess the factors of production value streams the elements of the top of the Toyota's house as well as fourth and sixth Toyota's managing principles were used. On the basis of the feedback from respondents –the foundry workers, there can be determined the validity of series of decisive factors' importance that equalizes the work load and requires the standardization.

Explicating Validity

Science.gov (United States)

Kane, Michael T.

2016-01-01

How we choose to use a term depends on what we want to do with it. If "validity" is to be used to support a score interpretation, validation would require an analysis of the plausibility of that interpretation. If validity is to be used to support score uses, validation would require an analysis of the appropriateness of the proposed…

Accumulation of Content Validation Evidence for the Critical Thinking Self-Assessment Scale.

Science.gov (United States)

Nair, Girija Gopinathan; Hellsten, Laurie-Ann M; Stamler, Lynnette Leeseberg

2017-04-01

Critical thinking skills (CTS) are essential for nurses; assessing students' acquisition of these skills is a mandate of nursing curricula. This study aimed to develop a self-assessment instrument of critical thinking skills (Critical Thinking Self-Assessment Scale [CTSAS]) for students' self-monitoring. An initial pool of 196 items across 6 core cognitive skills and 16 subskills were generated using the American Philosophical Association definition of CTS. Experts' content review of the items and their ratings provided evidence of content relevance using the item-level content validity index (I-CVI) and Aiken's content validity coefficient (VIk). 115 items were retained (range of I-CVI values = .70 to .94 and range of VIk values = .69-.95; significant at pself-assessment purposes.

Serum free light chain reference values: a critical approach.

Science.gov (United States)

Altinier, Sara; Seguso, Mara; Zaninotto, Martina; Varagnolo, Mariacristina; Adami, Fausto; Angeli, Paolo; Plebani, Mario

2013-05-01

The clinical usefulness of serum free light chain (FLC) measurement in the management of patients with plasma cell proliferative disorders has been reported in several papers, and most clinical studies use the reference ranges declared by the manufacturer. The aim of the present study was to evaluate the reproducibility of FLCs immunoassay and to validate the reference range, before introducing it in routine setting. Internal quality control materials and a pool of fresh serum samples were used to evaluate imprecision; 162 fresh sera from healthy blood donors were analyzed to evaluate the reference range for FLCs. In order to verify the κ/λ FLC ratio, 43 sera from patients with polyclonal hypergammaglobulinemia were tested. The FLC immunoassay was performed using a nephelometer with the Freelite reagents. The imprecision studies performed using a serum pool tested with two different lots of reagents showed a mean CV of 16.09% for κFLC and of 16.72% for λFLC. Lower CV%s and different mean values were found by calculating the results from each specific lot separately, while different results were obtained using the control materials provided by the manufacturer. In reference subjects, the 2.5-97.5th percentiles were found to be 4.52-22.33 and 4.84-21.88mg/L for κFLC and λFLC, respectively. The range for κ/λ ratio (0.65-2.36) was validated with the values obtained from subjects with polyclonal hypergammaglobulinemia. In retesting 15 samples from blood donor subjects with a different lot of reagents, mean bias percentages of 17.60 for κFLC and 15.26 for λFLC were obtained. These findings confirm the lot-to-lot variability of the FLC assays also in the measurement of polyclonal light chains, as well as the need to carefully validate the reference values. Published by Elsevier Inc.

Validation of main nuclear libraries used in thorium reactors using the Serpent code

International Nuclear Information System (INIS)

Faga, Lucas J.

2017-01-01

The purpose of this work is to validate the library of the Serpent standard database for systems containing U-233, U-235, Th-232, Pu-239 and Pu-240. The project will support the other projects of the newly created study group of Nuclear Engineering Center (CEN) of Instituto de Pesquisas Energéticas e Nucleares (IPEN), linked to the study of several types of reactors and their application in thorium cycles, a subject that gains more and more visibility, due to strong and potential promises of energy revolution. The results obtained at the end of the simulations were satisfactory, with the multiplication factors being effective close to 100 PCM of the values provided by the benchmarks, as expected for a validated library. The minimum distance between these values was 2 PCM and the maximum of 280 PCM. The final analysis demonstrates that the ENDF / B-VII library has validated nuclear data for the isotopes of interest and may be used in future thorium study group projects

Values-Based Self-Reflective Action Research for Promoting Gender Equality: Some Unexpected Lessons

Science.gov (United States)

Wood, Lesley

2014-01-01

The idea of using values as a means of guiding our research decisions and judging the validity of our claims of knowledge is well established in literature on the self-reflective genre of action research. Values in action research should always result in virtuous behaviour--to promote the general social good. However, ideas of what constitutes the…

Validity and reliability of balance assessment software using the Nintendo Wii balance board: usability and validation.

Science.gov (United States)

Park, Dae-Sung; Lee, GyuChang

2014-06-10

A balance test provides important information such as the standard to judge an individual's functional recovery or make the prediction of falls. The development of a tool for a balance test that is inexpensive and widely available is needed, especially in clinical settings. The Wii Balance Board (WBB) is designed to test balance, but there is little software used in balance tests, and there are few studies on reliability and validity. Thus, we developed a balance assessment software using the Nintendo Wii Balance Board, investigated its reliability and validity, and compared it with a laboratory-grade force platform. Twenty healthy adults participated in our study. The participants participated in the test for inter-rater reliability, intra-rater reliability, and concurrent validity. The tests were performed with balance assessment software using the Nintendo Wii balance board and a laboratory-grade force platform. Data such as Center of Pressure (COP) path length and COP velocity were acquired from the assessment systems. The inter-rater reliability, the intra-rater reliability, and concurrent validity were analyzed by an intraclass correlation coefficient (ICC) value and a standard error of measurement (SEM). The inter-rater reliability (ICC: 0.89-0.79, SEM in path length: 7.14-1.90, SEM in velocity: 0.74-0.07), intra-rater reliability (ICC: 0.92-0.70, SEM in path length: 7.59-2.04, SEM in velocity: 0.80-0.07), and concurrent validity (ICC: 0.87-0.73, SEM in path length: 5.94-0.32, SEM in velocity: 0.62-0.08) were high in terms of COP path length and COP velocity. The balance assessment software incorporating the Nintendo Wii balance board was used in our study and was found to be a reliable assessment device. In clinical settings, the device can be remarkably inexpensive, portable, and convenient for the balance assessment.

How it outsourcing impacts on value creation of manufacturer?

Directory of Open Access Journals (Sweden)

Chen Li-Shan

2017-01-01

Full Text Available A growing concern among the manufacturers who are actively involved in Information Technology outsourcing is post-contract management and the ensuing development of what many practitioners have coined the ‘outsourcing partnership’. Over the past few decades, information technology outsourcing has become a widely used and researched means for manufacturers to enhance their performance. Increasing attention has been paid to building successful partnerships in information systems outsourcing. This study employs strategic social positioning, customer participation, customer orientation, and communication culture to develop research model. The quantitative method will be used to validate the research model and test hypotheses developed. This study uses survey method to collect data, and analysis of the reliability, validity and test the proposed hypotheses by Smart Partial Least Squares. The purpose of this study is to use above four factors to produce value co-creation between outsourcing vendors and manufacturers. The final aim is for the future collaboration. This combination will allow manufacturers and information technology outsourcing vendors to increase their value co-creations in the fields of these factors.

Model validation and calibration based on component functions of model output

International Nuclear Information System (INIS)

Wu, Danqing; Lu, Zhenzhou; Wang, Yanping; Cheng, Lei

2015-01-01

The target in this work is to validate the component functions of model output between physical observation and computational model with the area metric. Based on the theory of high dimensional model representations (HDMR) of independent input variables, conditional expectations are component functions of model output, and the conditional expectations reflect partial information of model output. Therefore, the model validation of conditional expectations tells the discrepancy between the partial information of the computational model output and that of the observations. Then a calibration of the conditional expectations is carried out to reduce the value of model validation metric. After that, a recalculation of the model validation metric of model output is taken with the calibrated model parameters, and the result shows that a reduction of the discrepancy in the conditional expectations can help decrease the difference in model output. At last, several examples are employed to demonstrate the rationality and necessity of the methodology in case of both single validation site and multiple validation sites. - Highlights: • A validation metric of conditional expectations of model output is proposed. • HDRM explains the relationship of conditional expectations and model output. • An improved approach of parameter calibration updates the computational models. • Validation and calibration process are applied at single site and multiple sites. • Validation and calibration process show a superiority than existing methods

Validation of KENO-based criticality calculations at Rocky Flats

International Nuclear Information System (INIS)

Felsher, P.D.; McKamy, J.N.; Monahan, S.P.

1992-01-01

In the absence of experimental data, it is necessary to rely on computer-based computational methods in evaluating the criticality condition of a nuclear system. The validity of the computer codes is established in a two-part procedure as outlined in ANSI/ANS 8.1. The first step, usually the responsibility of the code developer, involves verification that the algorithmic structure of the code is performing the intended mathematical operations correctly. The second step involves an assessment of the code's ability to realistically portray the governing physical processes in question. This is accomplished by determining the code's bias, or systematic error, through a comparison of computational results to accepted values obtained experimentally. In this paper, the authors discuss the validation process for KENO and the Hansen-Roach cross sections in use at EG and G Rocky Flats. The validation process at Rocky Flats consists of both global and local techniques. The global validation resulted in a maximum k eff limit of 0.95 for the limiting-accident scanarios of a criticality evaluation

Distributed Trust Management for Validating SLA Choreographies

Science.gov (United States)

Haq, Irfan Ul; Alnemr, Rehab; Paschke, Adrian; Schikuta, Erich; Boley, Harold; Meinel, Christoph

For business workflow automation in a service-enriched environment such as a grid or a cloud, services scattered across heterogeneous Virtual Organizations (VOs) can be aggregated in a producer-consumer manner, building hierarchical structures of added value. In order to preserve the supply chain, the Service Level Agreements (SLAs) corresponding to the underlying choreography of services should also be incrementally aggregated. This cross-VO hierarchical SLA aggregation requires validation, for which a distributed trust system becomes a prerequisite. Elaborating our previous work on rule-based SLA validation, we propose a hybrid distributed trust model. This new model is based on Public Key Infrastructure (PKI) and reputation-based trust systems. It helps preventing SLA violations by identifying violation-prone services at service selection stage and actively contributes in breach management at the time of penalty enforcement.

Value engineering study final report on -- Spallation Neutron Source, Oak Ridge, Tennessee

International Nuclear Information System (INIS)

None

1999-01-01

The SNS Project has had numerous DOE/SC reviews to validate the technical baseline, management approach, cost, schedule, and Conceptual Design Report. As a result, in FY 1999 the SNS received $130 million and approval FR-om Congress to initiate Title 1 design and construction activities. Since this funding was less than requested for FY 1999 ($157 million) and validated in previous reviews, and because of improved costing information, the SNS Project team will reassess the cost and schedule baselines in an upcoming DOE review in January 1999. In preparation for this reassessment, the SNS has initiated a value engineering process to improve the design and to recover cost and contingency. Value engineering will continue throughout the life of the project, but the results described in this report are our initial efforts

Validity of parent-reported weight and height of preschool children measured at home or estimated without home measurement: a validation study

Directory of Open Access Journals (Sweden)

Cox Bianca

2011-07-01

Full Text Available Abstract Background Parental reports are often used in large-scale surveys to assess children's body mass index (BMI. Therefore, it is important to know to what extent these parental reports are valid and whether it makes a difference if the parents measured their children's weight and height at home or whether they simply estimated these values. The aim of this study is to compare the validity of parent-reported height, weight and BMI values of preschool children (3-7 y-old, when measured at home or estimated by parents without actual measurement. Methods The subjects were 297 Belgian preschool children (52.9% male. Participation rate was 73%. A questionnaire including questions about height and weight of the children was completed by the parents. Nurses measured height and weight following standardised procedures. International age- and sex-specific BMI cut-off values were employed to determine categories of weight status and obesity. Results On the group level, no important differences in accuracy of reported height, weight and BMI were identified between parent-measured or estimated values. However, for all 3 parameters, the correlations between parental reports and nurse measurements were higher in the group of children whose body dimensions were measured by the parents. Sensitivity for underweight and overweight/obesity were respectively 73% and 47% when parents measured their child's height and weight, and 55% and 47% when parents estimated values without measurement. Specificity for underweight and overweight/obesity were respectively 82% and 97% when parents measured the children, and 75% and 93% with parent estimations. Conclusions Diagnostic measures were more accurate when parents measured their child's weight and height at home than when those dimensions were based on parental judgements. When parent-reported data on an individual level is used, the accuracy could be improved by encouraging the parents to measure weight and height

Validation of the Reflux Disease Questionnaire into Greek

Directory of Open Access Journals (Sweden)

Eirini Oikonomidou

2012-09-01

Full Text Available Primary care physicians face challenges in diagnosing and managing gastroesophageal reflux disease (GERD. The Reflux Disease Questionnaire (RDQ meets the standards of validity, reliability, and practicability. This paper reports on the validation of the Greek translation of the RDQ. RDQ is a condition specific instrument. For the validation of the questionnaire, the internal consistency of its items was established using the alpha coefficient of Chronbach. The reproducibility (test-retest reliability was measured by kappa correlation coefficient and the criterion of validity was calculated against the diagnosis of another questionnaire already translated and validated into Greek (IDGP using kappa correlation coefficient. A factor analysis was also performed. Greek RDQ showed a high overall internal consistency (alpha value: 0.91 for individual comparison. All 8 items regarding heartburn and regurgitation, GERD, had good reproducibility (Cohen’s κ 0.60-0.79, while the remaining 4 items about dyspepsia had a moderate reproducibility (Cohen’s κ=’ 0.40-0.59 The kappa coefficient for criterion validity for GERD was rather poor (0.20, 95% CI: 0.04, 0.36 and the overall agreement between the results of the RDQ questionnaire and those based on the IDGP questionnaire was 70.5%. Factor analysis indicated 3 factors with Eigenvalue over 1.0, and responsible for 76.91% of variance. Regurgitation items correlated more strongly with the third component but pain behind sternum and upper stomach pain correlated with the second component. The Greek version of RDQ seems to be a reliable and valid instrument following the pattern of the original questionnaire, and could be used in primary care research in Greece.

Validation in the cytopathology laboratory: its time has come.

Science.gov (United States)

Haack, Lori A; Shalkham, John

2007-08-01

The cytology laboratory has traditionally performed a relatively small variety of tests. The testing processes employed were generally manually performed and included preparation of glass slide materials, staining of these slides, coverslipping, and microscopic evaluation of the cellular material. Instrumentation in the cytology laboratory was very limited and included a centrifuge, membrane filtration system, and possibly an automated staining machine. If instruments were added, for example, a liquid based preparation device or an automated coverslipping device; the instruments were rarely checked to assure they were operating properly before implementation into clinical practice. In addition, little documentation was maintained with regards to the instrument performance evaluation process. Increasing automation and expansion of testing options have changed how cytopathology is practiced. There are many new devices employed for the preparation of specimens, staining and coverslipping of slides, and evaluation of cellular material. The increasing use of molecular testing methods in cytopathology further adds to the changing landscape of cytopathology. New instrumentation and testing methods are routinely being introduced and the cytopathology laboratory must assure that the testing performed is accurate and consistent. Cytopathology laboratory professionals need to appreciate the value of validation of the tests we perform and the instruments we use in order to best serve the patient. Our clinical laboratory colleagues have traditionally performed validation on both instruments and test methods before using them for clinical testing. If cytopathology wants to perform the complex testing being introduced and effectively utilize new instrumentation, we need to understand the value of validation and how we apply validation to our laboratory practice. Copyright 2007 Wiley-Liss, Inc.

Clinical validation of the Tempus xO assay

Science.gov (United States)

Beaubier, Nike; Tell, Robert; Huether, Robert; Bontrager, Martin; Bush, Stephen; Parsons, Jerod; Shah, Kaanan; Baker, Tim; Selkov, Gene; Taxter, Tim; Thomas, Amber; Bettis, Sam; Khan, Aly; Lau, Denise; Lee, Christina; Barber, Matthew; Cieslik, Marcin; Frankenberger, Casey; Franzen, Amy; Weiner, Ali; Palmer, Gary; Lonigro, Robert; Robinson, Dan; Wu, Yi-Mi; Cao, Xuhong; Lefkofsky, Eric; Chinnaiyan, Arul; White, Kevin P.

2018-01-01

We have developed a clinically validated NGS assay that includes tumor, germline and RNA sequencing. We apply this assay to clinical specimens and cell lines, and we demonstrate a clinical sensitivity of 98.4% and positive predictive value of 100% for the clinically actionable variants measured by the assay. We also demonstrate highly accurate copy number measurements and gene rearrangement identification. PMID:29899824

Goodwill, Excess Returns, and Determinants of Value Creation and Overpayment

NARCIS (Netherlands)

Lycklama a Nijeholt, M.; Grift, Y.K.|info:eu-repo/dai/nl/073586358

2007-01-01

In this article we have investigated whether the determinants of excess returns (especially of target excess returns) are valid for purchased goodwill as well. Among them are acquirer’s and target’s Tobin’s q, and debt assets ratio, that explain value creation of acquisitions, and relative size,

Why and how multinational enterprises can be value-creating organizations

NARCIS (Netherlands)

Hennart, J.M.A.

2015-01-01

Rugman made the valid point that Multinational Enterprises are value-creating organizations but in this piece I question his explanation of why this is the case. I argue that it is not, as Rugman proposed, because MNEs are better at safeguarding their firm-specific advantages (FSAs) but because

The Conceptualization of Value in the Value Proposition of New Health Technologies Comment on "Providing Value to New Health Technology: The Early Contribution of Entrepreneurs, Investors, and Regulatory Agencies".

Science.gov (United States)

Buttigieg, Sandra C; Hoof, Joost van

2017-07-03

Lehoux et al provide a highly valid contribution in conceptualizing value in value propositions for new health technologies and developing an analytic framework that illustrates the interplay between health innovation supply-side logic (the logic of emergence) and demand-side logic (embedding in the healthcare system). This commentary brings forth several considerations on this article. First, a detailed stakeholder analysis provides the necessary premonition of potential hurdles in the development, implementation and dissemination of a new technology. This can be achieved by categorizing potential stakeholder groups on the basis of the potential impact of future technology. Secondly, the conceptualization of value in value propositions of new technologies should not only embrace business/economic and clinical values but also ethical, professional and cultural values, as well as factoring in the notion of usability and acceptance of new technology. As a final note, the commentary emphasises the point that technology should facilitate delivery of care without negatively affecting doctor-patient communications, physical examination skills, and development of clinical knowledge. © 2018 The Author(s); Published by Kerman University of Medical Sciences. This is an open-access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Quantitative validation of a habitat suitability index for oyster restoration

Directory of Open Access Journals (Sweden)

Seth eTheuerkauf

2016-05-01

Full Text Available Habitat suitability index (HSI models provide spatially explicit information on the capacity of a given habitat to support a species of interest, and their prevalence has increased dramatically in recent years. Despite caution that the reliability of HSIs must be validated using independent, quantitative data, most HSIs intended to inform terrestrial and marine species management remain unvalidated. Furthermore, of the eight HSI models developed for eastern oyster (Crassostrea virginica restoration and fishery production, none has been validated. Consequently, we developed, calibrated, and validated an HSI for the eastern oyster to identify optimal habitat for restoration in a tributary of Chesapeake Bay, the Great Wicomico River (GWR. The GWR harbors a high density, restored oyster population, and therefore serves as an excellent model system for assessing the validity of the HSI. The HSI was derived from GIS layers of bottom type, salinity, and water depth (surrogate for dissolved oxygen, and was tested using live adult oyster density data from a survey of high vertical relief reefs (HRR and low vertical relief reefs (LRR in the sanctuary network. Live adult oyster density was a statistically-significant sigmoid function of the HSI, which validates the HSI as a robust predictor of suitable oyster reef habitat for rehabilitation or restoration. In addition, HRR had on average 103-116 more adults m^−2 than LRR at a given level of the HSI. For HRR, HSI values ≥0.3 exceeded the accepted restoration target of 50 live adult oysters m^−2. For LRR, the HSI was generally able to predict live adult oyster densities that meet or exceed the target at HSI values ≥0.3. The HSI indicated that there remain large areas of suitable habitat for restoration in the GWR. This study provides a robust framework for HSI model development and validation, which can be refined and applied to other systems and previously developed HSIs to improve the efficacy of

Lecture Notes on Criticality Safety Validation Using MCNP & Whisper

Energy Technology Data Exchange (ETDEWEB)

Brown, Forrest B. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Rising, Michael Evan [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Alwin, Jennifer Louise [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2016-03-11

Training classes for nuclear criticality safety, MCNP documentation. The need for, and problems surrounding, validation of computer codes and data area considered first. Then some background for MCNP & Whisper is given--best practices for Monte Carlo criticality calculations, neutron spectra, S(α,β) thermal neutron scattering data, nuclear data sensitivities, covariance data, and correlation coefficients. Whisper is computational software designed to assist the nuclear criticality safety analyst with validation studies with the Monte Carlo radiation transport package MCNP. Whisper's methodology (benchmark selection – C_k's, weights; extreme value theory – bias, bias uncertainty; MOS for nuclear data uncertainty – GLLS) and usage are discussed.

Beyond cost-of-energy, the value-of-energy metric and value-centric approaches to design, operations, and maintenance of wind turbines

Science.gov (United States)

Fernandes, Kevin

This thesis is oriented toward developers, owners, operators and investors of renewable energy projects. With increasing demand of renewables, our energy dependence comes down to reducing costs associated with this sector so as to compete with the existing sources. One way of valuing investment potential is to determine and then compare the overall value derived by investing in a particular project. Several engineering and financial levers, one of which is operation and maintenance, affect this value. This thesis provides a useful visual aid to owners and operators by which they can operate and maintain their wind farm so as to achieve maximum value throughout its lifetime. All the necessary components that go into developing a business model of a wind farm project will be discussed. Finally, this tool is valid within the assumptions that are explicitly stated. Real world data and trends are used to provide a practical approach to the optimization.

Highly Efficient Training, Refinement, and Validation of a Knowledge-based Planning Quality-Control System for Radiation Therapy Clinical Trials

Energy Technology Data Exchange (ETDEWEB)

Li, Nan; Carmona, Ruben [Department of Radiation Medicine and Applied Sciences, University of California San Diego, La Jolla, California (United States); Sirak, Igor; Kasaova, Linda [Department of Oncology and Radiotherapy, University Hospital, Hradec Kralove (Czech Republic); Followill, David [Department of Radiation Physics, University of Texas MD Anderson Cancer Center, Houston, Texas (United States); Michalski, Jeff; Bosch, Walter; Straube, William [Department of Radiation Oncology, Washington University in St Louis, St Louis, Missouri (United States); Mell, Loren K. [Department of Radiation Medicine and Applied Sciences, University of California San Diego, La Jolla, California (United States); Moore, Kevin L., E-mail: kevinmoore@ucsd.edu [Department of Radiation Medicine and Applied Sciences, University of California San Diego, La Jolla, California (United States)

2017-01-01

Purpose: To demonstrate an efficient method for training and validation of a knowledge-based planning (KBP) system as a radiation therapy clinical trial plan quality-control system. Methods and Materials: We analyzed 86 patients with stage IB through IVA cervical cancer treated with intensity modulated radiation therapy at 2 institutions according to the standards of the INTERTECC (International Evaluation of Radiotherapy Technology Effectiveness in Cervical Cancer, National Clinical Trials Network identifier: 01554397) protocol. The protocol used a planning target volume and 2 primary organs at risk: pelvic bone marrow (PBM) and bowel. Secondary organs at risk were rectum and bladder. Initial unfiltered dose-volume histogram (DVH) estimation models were trained using all 86 plans. Refined training sets were created by removing sub-optimal plans from the unfiltered sample, and DVH estimation models… and DVH estimation models were constructed by identifying 30 of 86 plans emphasizing PBM sparing (comparing protocol-specified dosimetric cutpoints V{sub 10} (percentage volume of PBM receiving at least 10 Gy dose) and V{sub 20} (percentage volume of PBM receiving at least 20 Gy dose) with unfiltered predictions) and another 30 of 86 plans emphasizing bowel sparing (comparing V{sub 40} (absolute volume of bowel receiving at least 40 Gy dose) and V{sub 45} (absolute volume of bowel receiving at least 45 Gy dose), 9 in common with the PBM set). To obtain deliverable KBP plans, refined models must inform patient-specific optimization objectives and/or priorities (an auto-planning “routine”). Four candidate routines emphasizing different tradeoffs were composed, and a script was developed to automatically re-plan multiple patients with each routine. After selection of the routine that best met protocol objectives in the 51-patient training sample (KBP{sub FINAL}), protocol-specific DVH metrics and normal tissue complication probability were compared for original

Validation of data and indicators in the Danish Cholecystectomy Database

DEFF Research Database (Denmark)

Harboe, Kirstine Moll; Anthonsen, Kristian; Bardram, Linda

2009-01-01

and postoperative complications RESEARCH DESIGN AND SUBJECTS: Data from 1360 medical records of patients undergoing cholecystectomy were compared to the relevant administrative data from the National Patient Registry. The medical records served as the "gold standard". The association between the individual...... indicators and the occurrence of a postoperative complication was assessed. MEASURES: Validation of administrative data against the gold standard was done by the calculation of per cent agreement (including kappa-values) sensitivity/specificity and predictive values. The association between indicators...

e-Learning quality: Scale development and validation in Indian context

Directory of Open Access Journals (Sweden)

Arun Kumar Agariya

2012-12-01

Full Text Available The aim of this paper is to develop a reliable and valid e-learning quality measurement scales from the learner as well as faculty perspectives in Indian context. Exploratory factor analysis followed by confirmatory factor analysis was done which is presented in two forms; covariance model and the structural model. The covariance model shows that the factors namely collaboration, industry acceptance and value addition are important from the learner’s point of view whereas the factors namely transparency in assessment, technical know-how and engagement (from students are important from faculty point of view. Factors namely course content and design structures (technology/website design are found equally important for learner’s as well as faculty’s perspective. The structural models validate the previously extracted factors along with their indicators. The findings of this study validate the long held belief that e-learning quality is a multidimensional construct and serves as a critical success factor. The proposed scale will help in identifying issues that contribute towards e-learning quality in Indian context and thereby formulating strategies accordingly, resulting in efficient (in terms of cost and effective (outcomes e-learning practices, which is the necessity of the hour for the economic development of the country. A fair amount of literature on e-learning dealt with identifying factors explaining the constructs of quality, perceived value and satisfaction. But there is paucity of research pertaining to e-learning quality scale development and validation from the learner as well as faculty perspective. This study is an attempt to bridge this gap in the existing literature.

Different top-down approaches to estimate measurement uncertainty of whole blood tacrolimus mass concentration values.

Science.gov (United States)

Rigo-Bonnin, Raül; Blanco-Font, Aurora; Canalias, Francesca

2018-05-08

Values of mass concentration of tacrolimus in whole blood are commonly used by the clinicians for monitoring the status of a transplant patient and for checking whether the administered dose of tacrolimus is effective. So, clinical laboratories must provide results as accurately as possible. Measurement uncertainty can allow ensuring reliability of these results. The aim of this study was to estimate measurement uncertainty of whole blood mass concentration tacrolimus values obtained by UHPLC-MS/MS using two top-down approaches: the single laboratory validation approach and the proficiency testing approach. For the single laboratory validation approach, we estimated the uncertainties associated to the intermediate imprecision (using long-term internal quality control data) and the bias (utilizing a certified reference material). Next, we combined them together with the uncertainties related to the calibrators-assigned values to obtain a combined uncertainty for, finally, to calculate the expanded uncertainty. For the proficiency testing approach, the uncertainty was estimated in a similar way that the single laboratory validation approach but considering data from internal and external quality control schemes to estimate the uncertainty related to the bias. The estimated expanded uncertainty for single laboratory validation, proficiency testing using internal and external quality control schemes were 11.8%, 13.2%, and 13.0%, respectively. After performing the two top-down approaches, we observed that their uncertainty results were quite similar. This fact would confirm that either two approaches could be used to estimate the measurement uncertainty of whole blood mass concentration tacrolimus values in clinical laboratories. Copyright © 2018 The Canadian Society of Clinical Chemists. Published by Elsevier Inc. All rights reserved.

Fostering creativity in product and service development: validation in the domain of information technology.

Science.gov (United States)

Zeng, Liang; Proctor, Robert W; Salvendy, Gavriel

2011-06-01

This research is intended to empirically validate a general model of creative product and service development proposed in the literature. A current research gap inspired construction of a conceptual model to capture fundamental phases and pertinent facilitating metacognitive strategies in the creative design process. The model also depicts the mechanism by which design creativity affects consumer behavior. The validity and assets of this model have not yet been investigated. Four laboratory studies were conducted to demonstrate the value of the proposed cognitive phases and associated metacognitive strategies in the conceptual model. Realistic product and service design problems were used in creativity assessment to ensure ecological validity. Design creativity was enhanced by explicit problem analysis, whereby one formulates problems from different perspectives and at different levels of abstraction. Remote association in conceptual combination spawned more design creativity than did near association. Abstraction led to greater creativity in conducting conceptual expansion than did specificity, which induced mental fixation. Domain-specific knowledge and experience enhanced design creativity, indicating that design can be of a domain-specific nature. Design creativity added integrated value to products and services and positively influenced customer behavior. The validity and value of the proposed conceptual model is supported by empirical findings. The conceptual model of creative design could underpin future theory development. Propositions advanced in this article should provide insights and approaches to facilitate organizations pursuing product and service creativity to gain competitive advantage.

Safe current injection strategies for a STATCOM under asymmetrical grid faults

DEFF Research Database (Denmark)

Rodriguez, Pedro; Medeiros, Gustavo; Luna, Alvaro

2010-01-01

This paper explores different strategies to set the reference current of a STATCOM under unbalanced grid voltage conditions and determines the maximum deliverable reactive power in each case to guarantee the injected current is permanently within the STATCOM secure operation limits. The paper...... presents a comprehensive derivation of the proposed STATCOM control strategies to set the reactive current reference under unbalanced grid faults, together with an extensive evaluation using simulation and experimental results from a low-scale laboratory setup in order to verify and validate the dynamic...

Validation of diabetes mellitus and hypertension diagnosis in computerized medical records in primary health care

Directory of Open Access Journals (Sweden)

Abánades-Herranz Juan C

2011-10-01

Full Text Available Abstract Background Computerized Clinical Records, which are incorporated in primary health care practice, have great potential for research. In order to use this information, data quality and reliability must be assessed to prevent compromising the validity of the results. The aim of this study is to validate the diagnosis of hypertension and diabetes mellitus in the computerized clinical records of primary health care, taking the diagnosis criteria established in the most prominently used clinical guidelines as the gold standard against which what measure the sensitivity, specificity, and determine the predictive values. The gold standard for diabetes mellitus was the diagnostic criteria established in 2003 American Diabetes Association Consensus Statement for diabetic subjects. The gold standard for hypertension was the diagnostic criteria established in the Joint National Committee published in 2003. Methods A cross-sectional multicentre validation study of diabetes mellitus and hypertension diagnoses in computerized clinical records of primary health care was carried out. Diagnostic criteria from the most prominently clinical practice guidelines were considered for standard reference. Sensitivity, specificity, positive and negative predictive values, and global agreement (with kappa index, were calculated. Results were shown overall and stratified by sex and age groups. Results The agreement for diabetes mellitus with the reference standard as determined by the guideline was almost perfect (κ = 0.990, with a sensitivity of 99.53%, a specificity of 99.49%, a positive predictive value of 91.23% and a negative predictive value of 99.98%. Hypertension diagnosis showed substantial agreement with the reference standard as determined by the guideline (κ = 0.778, the sensitivity was 85.22%, the specificity 96.95%, the positive predictive value 85.24%, and the negative predictive value was 96.95%. Sensitivity results were worse in patients who

High Turbidity Solis Clear Sky Model: Development and Validation

Directory of Open Access Journals (Sweden)

Pierre Ineichen

2018-03-01

Full Text Available The Solis clear sky model is a spectral scheme based on radiative transfer calculations and the Lambert–Beer relation. Its broadband version is a simplified fast analytical version; it is limited to broadband aerosol optical depths lower than 0.45, which is a weakness when applied in countries with very high turbidity such as China or India. In order to extend the use of the original simplified version of the model for high turbidity values, we developed a new version of the broadband Solis model based on radiative transfer calculations, valid for turbidity values up to 7, for the three components, global, beam, and diffuse, and for the four aerosol types defined by Shettle and Fenn. A validation of low turbidity data acquired in Geneva shows slightly better results than the previous version. On data acquired at sites presenting higher turbidity data, the bias stays within ±4% for the beam and the global irradiances, and the standard deviation around 5% for clean and stable condition data and around 12% for questionable data and variable sky conditions.

Reliability and Validity Study of the Attitude towards Mathematics Instruments Short Form

Directory of Open Access Journals (Sweden)

Güney HACIÖMEROĞLU

2017-05-01

Full Text Available Purpose of this study was to investigate the reliability and validity of the Turkish form of the Attitude Towards Mathematics Instrument Short Form developed by Lim and Chapman (2013. In this study, data gathered from 310 elementary students were utilized for Exploratory and Confirmatory Factor Analysis to determine the structure of factor loading. The factor loading among the sub-scales were different from original. Confirmatory Factor analysis revealed that the model was acceptable. There were three sub-scales, value, self-confidence, enjoyment and motivation. Cronbach’s alpha coefficient for the overall instrument was calculated as .84, respectively. The adapted instrument includes three sub-scales: value (α=.91, self-confidence (α=.86, enjoyment and motivation (α=.82. Turkish adaptation of the questionnaire is valid and reliable and appropriate to use in Turkish culture.

Preliminary Psychometric Analysis of the Modified Perceived Value of Certification Tool for the Nurse Educator.

Science.gov (United States)

Barbe, Tammy

2015-01-01

The purpose of this study was to examine psychometric properties of the Perceived Value of Certification Tool© with a focus on nurse educator certification (PVCT-NE) in a sample of nurse educators. Greater understanding of faculty perceptions of certification is necessary to facilitate a strong cadre of nursing faculty; however, research around nurse educator certification is limited by a lack of reliable and valid instruments to measure such perceptions. Twenty-four nursing faculty from one university participated in the psychometric study, which involved completion of the PVCT-NE in a web-based survey format. Internal consistency reliability was excellent. Cronbach's alpha for the total PVCT-NE was .94 (.93 for the intrinsic subscale and .86 for the extrinsic subscale). A content validity index of .95 was obtained. There is preliminary evidence that the PVCT-NE is a reliable and valid instrument to measure perceived value of certification in nurse educators.

A Comparison of EQ-5D-3L Index Scores Using Malaysian, Singaporean, Thai, and UK Value Sets in Indonesian Cervical Cancer Patients.

Science.gov (United States)

Endarti, Dwi; Riewpaiboon, Arthorn; Thavorncharoensap, Montarat; Praditsitthikorn, Naiyana; Hutubessy, Raymond; Kristina, Susi Ari

2018-05-01

To gain insight into the most suitable foreign value set among Malaysian, Singaporean, Thai, and UK value sets for calculating the EuroQol five-dimensional questionnaire index score (utility) among patients with cervical cancer in Indonesia. Data from 87 patients with cervical cancer recruited from a referral hospital in Yogyakarta province, Indonesia, from an earlier study of health-related quality of life were used in this study. The differences among the utility scores derived from the four value sets were determined using the Friedman test. Performance of the psychometric properties of the four value sets versus visual analogue scale (VAS) was assessed. Intraclass correlation coefficients and Bland-Altman plots were used to test the agreement among the utility scores. Spearman ρ correlation coefficients were used to assess convergent validity between utility scores and patients' sociodemographic and clinical characteristics. With respect to known-group validity, the Kruskal-Wallis test was used to examine the differences in utility according to the stages of cancer. There was significant difference among utility scores derived from the four value sets, among which the Malaysian value set yielded higher utility than the other three value sets. Utility obtained from the Malaysian value set had more agreements with VAS than the other value sets versus VAS (intraclass correlation coefficients and Bland-Altman plot tests results). As for the validity, the four value sets showed equivalent psychometric properties as those that resulted from convergent and known-group validity tests. In the absence of an Indonesian value set, the Malaysian value set was more preferable to be used compared with the other value sets. Further studies on the development of an Indonesian value set need to be conducted. Copyright © 2018. Published by Elsevier Inc.

Validity and Reliability Testing of an e-learning Questionnaire for Chemistry Instruction

Science.gov (United States)

Guspatni, G.; Kurniawati, Y.

2018-04-01

The aim of this paper is to examine validity and reliability of a questionnaire used to evaluate e-learning implementation in chemistry instruction. 48 questionnaires were filled in by students who had studied chemistry through e-learning system. The questionnaire consisted of 20 indicators evaluating students’ perception on using e-learning. Parametric testing was done as data were assumed to follow normal distribution. Item validity of the questionnaire was examined through item-total correlation using Pearson’s formula while its reliability was assessed with Cronbach’s alpha formula. Moreover, convergent validity was assessed to see whether indicators building a factor had theoretically the same underlying construct. The result of validity testing revealed 19 valid indicators while the result of reliability testing revealed Cronbach’s alpha value of .886. The result of factor analysis showed that questionnaire consisted of five factors, and each of them had indicators building the same construct. This article shows the importance of factor analysis to get a construct valid questionnaire before it is used as research instrument.

Validation of Spanish versions of the Pelvic Floor Distress Inventory (PFDI) and Pelvic Floor Impact Questionnaire (PFIQ): a multicenter validation randomized study.

Science.gov (United States)

Omotosho, Tola B; Hardart, Anne; Rogers, Rebecca G; Schaffer, Joseph I; Kobak, William H; Romero, Audrey A

2009-06-01

The purpose of this study is to validate Spanish versions of the Pelvic Floor Distress Inventory (PFDI) and Pelvic Floor Impact Questionnaire (PFIQ). Spanish versions were developed using back translation and validation was performed by randomizing bilingual women to complete the Spanish or English versions of the questionnaires first. Weighted kappa statistics assessed agreement for individual questions; interclass correlation coefficients (ICC) compared primary and subscale scores. Cronbach's alpha assessed internal consistency of Spanish versions. To detect a 2.7 point difference in scores with 80% power and alpha of 0.05, 44 bilingual subjects were required. Individual questions showed good to excellent agreement (kappa > 0.6) for all but eight questions on the PFIQ. ICCs of primary and subscale scores for both questionnaires showed excellent agreement. (All ICC > 0.79). All Cronbach's alpha values were excellent (>0.84) for the primary scales of both questionnaires. Valid and reliable Spanish versions of the PFIQ and PFDI have been developed.

Cross Validation Through Two-Dimensional Solution Surface for Cost-Sensitive SVM.

Science.gov (United States)

Gu, Bin; Sheng, Victor S; Tay, Keng Yeow; Romano, Walter; Li, Shuo

2017-06-01

Model selection plays an important role in cost-sensitive SVM (CS-SVM). It has been proven that the global minimum cross validation (CV) error can be efficiently computed based on the solution path for one parameter learning problems. However, it is a challenge to obtain the global minimum CV error for CS-SVM based on one-dimensional solution path and traditional grid search, because CS-SVM is with two regularization parameters. In this paper, we propose a solution and error surfaces based CV approach (CV-SES). More specifically, we first compute a two-dimensional solution surface for CS-SVM based on a bi-parameter space partition algorithm, which can fit solutions of CS-SVM for all values of both regularization parameters. Then, we compute a two-dimensional validation error surface for each CV fold, which can fit validation errors of CS-SVM for all values of both regularization parameters. Finally, we obtain the CV error surface by superposing K validation error surfaces, which can find the global minimum CV error of CS-SVM. Experiments are conducted on seven datasets for cost sensitive learning and on four datasets for imbalanced learning. Experimental results not only show that our proposed CV-SES has a better generalization ability than CS-SVM with various hybrids between grid search and solution path methods, and than recent proposed cost-sensitive hinge loss SVM with three-dimensional grid search, but also show that CV-SES uses less running time.

Convergent validity test, construct validity test and external validity test of the David Liberman algorithm

Directory of Open Access Journals (Sweden)

David Maldavsky

2013-08-01

Full Text Available The author first exposes a complement of a previous test about convergent validity, then a construct validity test and finally an external validity test of the David Liberman algorithm.  The first part of the paper focused on a complementary aspect, the differential sensitivity of the DLA 1 in an external comparison (to other methods, and 2 in an internal comparison (between two ways of using the same method, the DLA.  The construct validity test exposes the concepts underlined to DLA, their operationalization and some corrections emerging from several empirical studies we carried out.  The external validity test examines the possibility of using the investigation of a single case and its relation with the investigation of a more extended sample.

Interobserver and intraobserver reliability and validity of the Vancouver classification system of periprosthetic femoral fractures after hip arthroplasty.

LENUS (Irish Health Repository)

Naqvi, Gohar A

2012-06-01

The Vancouver classification system of periprosthetic fractures has been revalidated in this study, using the radiographs of 45 patients. Three consultants and 3 trainees reviewed the radiographs independently, on 2 separate occasions, at least 2 weeks apart. Interobserver and intraobserver agreement and validity were analyzed, using weighted κ statistics. The mean κ value for interobserver agreement was found to be 0.69 (0.63-0.72) for consultants and 0.61 (0.56-0.65) for the trainees, both representing substantial agreement. Intraobserver κ values ranged from 0.74 to 0.90, showing substantial agreement. Validity analysis of 37 type B cases revealed 81% agreement within B1, B2, and B3 subgroups with a κ value of 0.68 (substantial agreement). This study has reconfirmed the reliability and validity of the Vancouver classification while it also emphasizes the intraoperative assessment of implant stability.

Geostatistical validation and cross-validation of magnetometric measurements of soil pollution with Potentially Toxic Elements in problematic areas

Science.gov (United States)

Fabijańczyk, Piotr; Zawadzki, Jarosław

2016-04-01

Field magnetometry is fast method that was previously effectively used to assess the potential soil pollution. One of the most popular devices that are used to measure the soil magnetic susceptibility on the soil surface is a MS2D Bartington. Single reading using MS2D device of soil magnetic susceptibility is low time-consuming but often characterized by considerable errors related to the instrument or environmental and lithogenic factors. In this connection, measured values of soil magnetic susceptibility have to be usually validated using more precise, but also much more expensive, chemical measurements. The goal of this study was to analyze validation methods of magnetometric measurements using chemical analyses of a concentration of elements in soil. Additionally, validation of surface measurements of soil magnetic susceptibility was performed using selected parameters of a distribution of magnetic susceptibility in a soil profile. Validation was performed using selected geostatistical measures of cross-correlation. The geostatistical approach was compared with validation performed using the classic statistics. Measurements were performed at selected areas located in the Upper Silesian Industrial Area in Poland, and in the selected parts of Norway. In these areas soil magnetic susceptibility was measured on the soil surface using a MS2D Bartington device and in the soil profile using MS2C Bartington device. Additionally, soil samples were taken in order to perform chemical measurements. Acknowledgment The research leading to these results has received funding from the Polish-Norwegian Research Programme operated by the National Centre for Research and Development under the Norwegian Financial Mechanism 2009-2014 in the frame of Project IMPACT - Contract No Pol-Nor/199338/45/2013.

SiteChar. Characterisation of European CO2 storage. Deliverable 8.4. Quantitative social site characterisations

Energy Technology Data Exchange (ETDEWEB)

Brunsting, S.; Mastop, E.A. [ECN Policy Studies, Energy research Centre of the Netherlands ECN, Amsterdam (Netherlands); Kaiser, M.; Zimmer, R. [Unabhaengiges Institut fuer Umweltfragen UfU, Berlin (Germany)

2013-06-15

This report describes the results of the last stage of the in-depth social site characterisation activities at two prospective CCS sites as part of the SiteChar project: a CCS onshore site and a CCS offshore site. The onshore site is the Zalecze and Zuchlow site application (Poland - WP5) and the offshore site is the North Sea Moray Firth site (UK - WP3). This deliverable describes the results from a repeated quantitative measurement of local awareness, knowledge, and perceptions of CCS at both sites using representative surveys. For comparison and discussion of all SiteChar WP8 results we refer to the final summary report D8.5. The 2nd survey showed some interesting results. First of all, awareness of CCS was still very low. While in the UK around half of the respondents had at least heard of local plans for CCS, in Poland this was only 21%. It seems that awareness in the UK was mostly induced by specific plans in the area that were abandoned in the course of the SiteChar project. Second, it seems that on the whole the local publics were rather positive about CCS. Most respondents expected a positive impact of CCS on the region. In the UK, arguments for that were mainly economic, while in Poland arguments were mainly related to environmental concerns. Although there are some worries about risks of leakage, especially at the onshore site in Poland, people think that authorities will properly regulate CCS and monitor the safety of CCS. Expectations were mostly that it would be good for the country and that it will help reach international targets for CO2 reduction and buy time to develop renewable energy. Respondents seemed uncertain about the costs of using CCS and whether the technique is ready for widespread use. Especially in Poland people seemed to agree that CCS is essential for tackling climate change. Most differences between the two sites may be attributed to the proximity of the site to the local community. The Polish site is onshore and therefore much

View Estimation Based on Value System

Science.gov (United States)

Takahashi, Yasutake; Shimada, Kouki; Asada, Minoru

Estimation of a caregiver's view is one of the most important capabilities for a child to understand the behavior demonstrated by the caregiver, that is, to infer the intention of behavior and/or to learn the observed behavior efficiently. We hypothesize that the child develops this ability in the same way as behavior learning motivated by an intrinsic reward, that is, he/she updates the model of the estimated view of his/her own during the behavior imitated from the observation of the behavior demonstrated by the caregiver based on minimizing the estimation error of the reward during the behavior. From this view, this paper shows a method for acquiring such a capability based on a value system from which values can be obtained by reinforcement learning. The parameters of the view estimation are updated based on the temporal difference error (hereafter TD error: estimation error of the state value), analogous to the way such that the parameters of the state value of the behavior are updated based on the TD error. Experiments with simple humanoid robots show the validity of the method, and the developmental process parallel to young children's estimation of its own view during the imitation of the observed behavior of the caregiver is discussed.

The social value of clinical research.

Science.gov (United States)

Habets, Michelle G J L; van Delden, Johannes J M; Bredenoord, Annelien L

2014-09-05

International documents on ethical conduct in clinical research have in common the principle that potential harms to research participants must be proportional to anticipated benefits. The anticipated benefits that can justify human research consist of direct benefits to the research participant, and societal benefits, also called social value. In first-in-human research, no direct benefits are expected and the benefit component of the risks-benefit assessment thus merely exists in social value. The concept social value is ambiguous by nature and is used in numerous ways in the research ethics literature. Because social value justifies involving human participants, especially in early human trials, this is problematic. Our analysis and interpretation of the concept social value has led to three proposals. First, as no direct benefits are expected for the research participants in first-in-human trials, we believe it is better to discuss a risk- value assessment instead of a risk - benefit assessment. This will also make explicit the necessity to have a clear and common use for the concept social value. Second, to avoid confusion we propose to limit the concept social value to the intervention tested. It is the expected improvement the intervention can bring to the wellbeing of (future) patients or society that is referred to when we speak about social value. For the sole purpose of gaining knowledge, we should not expose humans to potential harm; the ultimate justification of involving humans in research lies in the anticipated social value of the intervention. Third, at the moment only the validity of the clinical research proposal is a prerequisite for research to take place. We recommend making the anticipated social value a prerequisite as well. In this paper we analyze the use of the concept social value in research ethics. Despite its unavoidable ambiguity, we aim to find a best use of the concept, subject to its role in justifying involving humans in first

The validation of the turnover intention scale

Directory of Open Access Journals (Sweden)

Chris F.C. Bothma

2013-04-01

Full Text Available Orientation: Turnover intention as a construct has attracted increased research attention in the recent past, but there are seemingly not many valid and reliable scales around to measure turnover intention. Research purpose: This study focused on the validation of a shortened, six-item version of the turnover intention scale (TIS-6. Motivation for the study: The research question of whether the TIS-6 is a reliable and a valid scale for measuring turnover intention and for predicting actual turnover was addressed in this study. Research design, approach and method: The study was based on a census-based sample (n= 2429 of employees in an information, communication and technology (ICT sector company (N= 23 134 where the TIS-6 was used as one of the criterion variables. The leavers (those who left the company in this sample were compared with the stayers (those who remained in the employ of the company in this sample in respect of different variables used in the study. Main findings: It was established that the TIS-6 could measure turnover intentions reliably (α= 0.80. The TIS-6 could significantly distinguish between leavers and stayers (actual turnover, thereby confirming its criterion-predictive validity. The scale also established statistically significant differences between leavers and stayers in respect of a number of the remaining theoretical variables used in the study, thereby also confirming its differential validity. These comparisons were conducted for both the 4-month and the 4-year period after the survey was conducted. Practical/managerial implications: Turnover intention is related to a number of variables in the study which necessitates a reappraisal and a reconceptualisation of existing turnover intention models. Contribution/value-add: The TIS-6 can be used as a reliable and valid scale to assess turnover intentions and can therefore be used in research to validly and reliably assess turnover intentions or to

An Ethical Issue Scale for Community Pharmacy Setting (EISP): Development and Validation.

Science.gov (United States)

Crnjanski, Tatjana; Krajnovic, Dusanka; Tadic, Ivana; Stojkov, Svetlana; Savic, Mirko

2016-04-01

Many problems that arise when providing pharmacy services may contain some ethical components and the aims of this study were to develop and validate a scale that could assess difficulties of ethical issues, as well as the frequency of those occurrences in everyday practice of community pharmacists. Development and validation of the scale was conducted in three phases: (1) generating items for the initial survey instrument after qualitative analysis; (2) defining the design and format of the instrument; (3) validation of the instrument. The constructed Ethical Issue scale for community pharmacy setting has two parts containing the same 16 items for assessing the difficulty and frequency thereof. The results of the 171 completely filled out scales were analyzed (response rate 74.89%). The Cronbach's α value of the part of the instrument that examines difficulties of the ethical situations was 0.83 and for the part of the instrument that examined frequency of the ethical situations was 0.84. Test-retest reliability for both parts of the instrument was satisfactory with all Interclass correlation coefficient (ICC) values above 0.6, (for the part that examines severity ICC = 0.809, for the part that examines frequency ICC = 0.929). The 16-item scale, as a self assessment tool, demonstrated a high degree of content, criterion, and construct validity and test-retest reliability. The results support its use as a research tool to asses difficulty and frequency of ethical issues in community pharmacy setting. The validated scale needs to be further employed on a larger sample of pharmacists.

Construct validity of a continuous metabolic syndrome score in children

Directory of Open Access Journals (Sweden)

Eisenmann Joey C

2010-01-01

Full Text Available Abstract Objective The primary purpose of this study was to examine the construct validity of a continuous metabolic syndrome score (cMetS in children. The secondary purpose was to identify a cutpoint value(s for an adverse cMetS based on receiver operating characteristic (ROC curve analysis. Methods 378 children aged 7 to 9 years were assessed for the metabolic syndrome which was determined by age-modified cutpoints. High-density-lipoprotein cholesterol, triglycerides, the homeostasis assessment model of insulin resistance, mean arterial pressure, and waist circumference were used to create a cMetS for each subject. Results About half of the subjects did not possess any risk factors while about 5% possessed the metabolic syndrome. There was a graded relationship between the cMetS and the number of adverse risk factors. The cMetS was lowest in the group with no adverse risk factors (-1.59 ± 1.76 and highest in those possessing the metabolic syndrome (≥3 risk factors (7.05 ± 2.73. The cutoff level yielding the maximal sensitivity and specificity for predicting the presence of the metabolic syndrome was a cMetS of 3.72 (sensitivity = 100%, specificity = 93.9%, and the area of the curve = 0.978 (0.957-0.990, 95% confidence intervals. Conclusion The results demonstrate the construct validity for the cMetS in children. Since there are several drawbacks to identifying a single cut-point value for the cMetS based on this sample, we urge researchers to use the approach herein to validate and create a cMetS that is specific to their study population.

Workplace nutrition knowledge questionnaire: psychometric validation and application.

Science.gov (United States)

Guadagnin, Simone C; Nakano, Eduardo Y; Dutra, Eliane S; de Carvalho, Kênia M B; Ito, Marina K

2016-11-01

Workplace dietary intervention studies in low- and middle-income countries using psychometrically sound measures are scarce. This study aimed to validate a nutrition knowledge questionnaire (NQ) and its utility in evaluating the changes in knowledge among participants of a Nutrition Education Program (NEP) conducted at the workplace. A NQ was tested for construct validity, internal consistency and discriminant validity. It was applied in a NEP conducted at six workplaces, in order to evaluate the effect of an interactive or a lecture-based education programme on nutrition knowledge. Four knowledge domains comprising twenty-three items were extracted in the final version of the NQ. Internal consistency of each domain was significant, with Kuder-Richardson formula values>0·60. These four domains presented a good fit in the confirmatory factor analysis. In the discriminant validity test, both the Expert and Lay groups scored>0·52, but the Expert group scores were significantly higher than those of the Lay group in all domains. When the NQ was applied in the NEP, the overall questionnaire scores increased significantly because of the NEP intervention, in both groups (Pnutrition knowledge among participants of NEP at the workplace. According to the NQ, an interactive nutrition education had a higher impact on nutrition knowledge than a lecture programme.

Bank Value: Comparing Customer and Employee Perceptions

Directory of Open Access Journals (Sweden)

Jelena Titko

2012-06-01

Full Text Available In the modern competitive environment, banks create the value generally using the relational capital. Thus, customer satisfaction and loyalty are the main components of bank success in a market. In turn, customer satisfaction is affected by bank service quality that determines bank’s value perceived by clients. The main goal of the research is to determine factors affecting bank value perceived by customers to examine the gaps in customers’ and employees’ perceptions of these factors. The goal of the paper is to prepare a theoretical basis for the survey and to describe and theoretically validate the design of the research instrument. To achieve the goal the brief literature review was conducted in the fields of relationship value management, service quality and customer buying behaviour. The statements of the questionnaire were developed based on Kotler’s concept of a customer perceived value and different variations of the SERVQUAL model. To purify the developed questionnaires, the authors conducted focus group interview. We believe that bank performance depends directly on the bank’s ability to capture and retain clients and on customer-employee relationships. Thus, it is crucial to know factors affecting customer perceived bank value. Using our developed instrument it is possible to measure the level of service quality in Latvian banks and to examine the difference between customers’ and employees’ viewpoints on the quality of bank services.

High historical values of foEs—Reality or artefact?

Science.gov (United States)

Laštovička, J.; Boška, J.; Burešová, D.; Kouba, D.

2012-01-01

Very high values of foEs had sometimes been reported in the past. These values, as well as all other ionogram-scaled values, had been derived from ionograms under the assumption of the vertical reflection of ordinary mode of sounding radio waves. In the past it was impossible to check the validity of this assumption. However, modern digisondes determine clearly the oblique or extraordinary mode reflections. To test the assumption of the vertical reflection of ordinary mode for high values of foEs, seven summers (June 2004-August 2010) from a midlatitude station Pruhonice are chosen. All hourly values of foEs≥6.0 MHz are selected from this data set, altogether 282 values. In 90% of cases the “classical” way of evaluation of foEs provides values higher than “true” values from modern digisonde (average difference about 1 MHz). 38% of “classical” foEs are oblique reflections, which however do not occur in direction perpendicular to geomagnetic field. The occurrence of high values of foEs varies very much from year to year between 0 and 130 events per year. As for diurnal variation, a pronounced maximum occurs at ˜10:00LT and 16:00LT (secondary), and a minimum after midnight.

Earth Observation for Citizen Science Validation, or Citizen Science for Earth Observation Validation? The Role of Quality Assurance of Volunteered Observations

Directory of Open Access Journals (Sweden)

Didier G. Leibovici

2017-10-01

Full Text Available Environmental policy involving citizen science (CS is of growing interest. In support of this open data stream of information, validation or quality assessment of the CS geo-located data to their appropriate usage for evidence-based policy making needs a flexible and easily adaptable data curation process ensuring transparency. Addressing these needs, this paper describes an approach for automatic quality assurance as proposed by the Citizen OBservatory WEB (COBWEB FP7 project. This approach is based upon a workflow composition that combines different quality controls, each belonging to seven categories or “pillars”. Each pillar focuses on a specific dimension in the types of reasoning algorithms for CS data qualification. These pillars attribute values to a range of quality elements belonging to three complementary quality models. Additional data from various sources, such as Earth Observation (EO data, are often included as part of the inputs of quality controls within the pillars. However, qualified CS data can also contribute to the validation of EO data. Therefore, the question of validation can be considered as “two sides of the same coin”. Based on an invasive species CS study, concerning Fallopia japonica (Japanese knotweed, the paper discusses the flexibility and usefulness of qualifying CS data, either when using an EO data product for the validation within the quality assurance process, or validating an EO data product that describes the risk of occurrence of the plant. Both validation paths are found to be improved by quality assurance of the CS data. Addressing the reliability of CS open data, issues and limitations of the role of quality assurance for validation, due to the quality of secondary data used within the automatic workflow, are described, e.g., error propagation, paving the route to improvements in the approach.

Historical Medical Value of Donguibogam

Directory of Open Access Journals (Sweden)

Bong-Keun Song

2016-03-01

Full Text Available Oriental medicine, since its origin in China, has had a long history extending over 2000 years. Today, it comprises several types of medicine predominately practiced in East Asia, including traditional Chinese, traditional Korean, and Kampo medicine. The distinctive medical system of traditional Korean medicine was established shortly after the publication of Donguibogam by Dr. Heo Jun in 1613. Donguibogam is highly acclaimed across East Asia; in 2009, in light of its historical medical value, the United Nations Educational, Scientific, and Cultural Organization registered the book on its cultural heritage list. Here, we review the historical medical value of Donguibogam. The findings confirm that Donguibogam developed a unique and independent form of traditional Korean medicine and innovatively reformed the disease classification system. Moreover, Donguibogam emphasized the importance of disease prevention and medical pragmatism. This book also accelerated the development of folk medicine. Owing to its historical medical value, Donguibogam is now considered the 'bible' of Oriental medicine. Its wide acceptance has contributed to the expansion of Korean medicine utilization among the general public. Donguibogam has also played an important role in the establishment of traditional Korean medicine as a universally valid and original form of medicine, independent of traditional Chinese medicine.

Robustness study in SSNTD method validation: indoor radon quality

Energy Technology Data Exchange (ETDEWEB)

Dias, D.C.S.; Silva, N.C.; Bonifácio, R.L., E-mail: danilacdias@gmail.com [Comissao Nacional de Energia Nuclear (LAPOC/CNEN), Pocos de Caldas, MG (Brazil). Laboratorio de Pocos de Caldas

2017-07-01

Quality control practices are indispensable to organizations aiming to reach analytical excellence. Method validation is an essential component to quality systems in laboratories, serving as a powerful tool for standardization and reliability of outcomes. This paper presents a study of robustness conducted over a SSNTD technique validation process, with the goal of developing indoor radon measurements at the highest level of quality. This quality parameter indicates how well a technique is able to provide reliable results in face of unexpected variations along the measurement. In this robustness study, based on the Youden method, 7 analytical conditions pertaining to different phases of the SSNTD technique (with focus on detector etching) were selected. Based on the ideal values for each condition as reference, extreme levels regarded as high and low were prescribed to each condition. A partial factorial design of 8 unique etching procedures was defined, where each presented their own set of high and low condition values. The Youden test provided 8 indoor radon concentration results, which allowed percentage estimations that indicate the potential influence of each analytical condition on the SSNTD technique. As expected, detector etching factors such as etching solution concentration, temperature and immersion time were identified as the most critical parameters to the technique. Detector etching is a critical step in the SSNTD method – one that must be carefully designed during validation and meticulously controlled throughout the entire process. (author)

Robustness study in SSNTD method validation: indoor radon quality

International Nuclear Information System (INIS)

Dias, D.C.S.; Silva, N.C.; Bonifácio, R.L.

2017-01-01

Quality control practices are indispensable to organizations aiming to reach analytical excellence. Method validation is an essential component to quality systems in laboratories, serving as a powerful tool for standardization and reliability of outcomes. This paper presents a study of robustness conducted over a SSNTD technique validation process, with the goal of developing indoor radon measurements at the highest level of quality. This quality parameter indicates how well a technique is able to provide reliable results in face of unexpected variations along the measurement. In this robustness study, based on the Youden method, 7 analytical conditions pertaining to different phases of the SSNTD technique (with focus on detector etching) were selected. Based on the ideal values for each condition as reference, extreme levels regarded as high and low were prescribed to each condition. A partial factorial design of 8 unique etching procedures was defined, where each presented their own set of high and low condition values. The Youden test provided 8 indoor radon concentration results, which allowed percentage estimations that indicate the potential influence of each analytical condition on the SSNTD technique. As expected, detector etching factors such as etching solution concentration, temperature and immersion time were identified as the most critical parameters to the technique. Detector etching is a critical step in the SSNTD method – one that must be carefully designed during validation and meticulously controlled throughout the entire process. (author)

Validation of measured friction by process tests

DEFF Research Database (Denmark)

Eriksen, Morten; Henningsen, Poul; Tan, Xincai

The objective of sub-task 3.3 is to evaluate under actual process conditions the friction formulations determined by simulative testing. As regards task 3.3 the following tests have been used according to the original project plan: 1. standard ring test and 2. double cup extrusion test. The task...... has, however, been extended to include a number of new developed process tests: 3. forward rod extrusion test, 4. special ring test at low normal pressure, 5. spike test (especially developed for warm and hot forging). Validation of the measured friction values in cold forming from sub-task 3.1 has...... been made with forward rod extrusion, and very good agreement was obtained between the measured friction values in simulative testing and process testing....

Member checking: a tool to enhance trustworthiness or merely a nod to validation?

OpenAIRE

Birt, Linda; Scott, Suzanne; Cavers, Deborah; Campbell, Christine; Walter, Fiona M

2016-01-01

The trustworthiness of results is the bedrock of high quality qualitative research. Member checking, also known as participant or respondent validation, is a technique for exploring the credibility of results. Data or results are returned to participants to check for accuracy and resonance with their experiences. Member checking is often mentioned as one in a list of validation techniques. This simplistic reporting might not acknowledge the value of using the method, nor its juxtaposition wit...

The Prognostic and Predictive Value of Soluble Type IV Collagen in Colorectal Cancer

DEFF Research Database (Denmark)

Rolff, Hans Christian; Christensen, Ib Jarle; Vainer, Ben

2016-01-01

PURPOSE: To investigate the prognostic and predictive biomarker value of type IV collagen in colorectal cancer. EXPERIMENTAL DESIGN: Retrospective evaluation of two independent cohorts of patients with colorectal cancer included prospectively in 2004-2005 (training set) and 2006-2008 (validation....... RESULTS: High levels of type IV collagen showed independent prognostic significance in both cohorts with hazard ratios (HRs; for a one-unit change on the log base 2 scale) of 2.25 [95% confidence intervals (CIs), 1.78-2.84; P ... and validation set, respectively. The prognostic impact was present both in patients with metastatic and nonmetastatic disease. The predictive value of the marker was investigated in stage II and III patients. In the training set, type IV collagen was prognostic both in the subsets of patients receiving...

Multilingual Validation of the Questionnaire for Verifying Stroke-Free Status in West Africa.

Science.gov (United States)

Sarfo, Fred; Gebregziabher, Mulugeta; Ovbiagele, Bruce; Akinyemi, Rufus; Owolabi, Lukman; Obiako, Reginald; Akpa, Onoja; Armstrong, Kevin; Akpalu, Albert; Adamu, Sheila; Obese, Vida; Boa-Antwi, Nana; Appiah, Lambert; Arulogun, Oyedunni; Mensah, Yaw; Adeoye, Abiodun; Tosin, Aridegbe; Adeleye, Osimhiarherhuo; Tabi-Ajayi, Eric; Phillip, Ibinaiye; Sani, Abubakar; Isah, Suleiman; Tabari, Nasir; Mande, Aliyu; Agunloye, Atinuke; Ogbole, Godwin; Akinyemi, Joshua; Laryea, Ruth; Melikam, Sylvia; Uvere, Ezinne; Adekunle, Gregory; Kehinde, Salaam; Azuh, Paschal; Dambatta, Abdul; Ishaq, Naser; Saulson, Raelle; Arnett, Donna; Tiwari, Hemnant; Jenkins, Carolyn; Lackland, Dan; Owolabi, Mayowa

2016-01-01

The Questionnaire for Verifying Stroke-Free Status (QVSFS), a method for verifying stroke-free status in participants of clinical, epidemiological, and genetic studies, has not been validated in low-income settings where populations have limited knowledge of stroke symptoms. We aimed to validate QVSFS in 3 languages, Yoruba, Hausa and Akan, for ascertainment of stroke-free status of control subjects enrolled in an on-going stroke epidemiological study in West Africa. Data were collected using a cross-sectional study design where 384 participants were consecutively recruited from neurology and general medicine clinics of 5 tertiary referral hospitals in Nigeria and Ghana. Ascertainment of stroke status was by neurologists using structured neurological examination, review of case records, and neuroimaging (gold standard). Relative performance of QVSFS without and with pictures of stroke symptoms (pictograms) was assessed using sensitivity, specificity, positive predictive value, and negative predictive value. The overall median age of the study participants was 54 years and 48.4% were males. Of 165 stroke cases identified by gold standard, 98% were determined to have had stroke, whereas of 219 without stroke 87% were determined to be stroke-free by QVSFS. Negative predictive value of the QVSFS across the 3 languages was 0.97 (range, 0.93-1.00), sensitivity, specificity, and positive predictive value were 0.98, 0.82, and 0.80, respectively. Agreement between the questionnaire with and without the pictogram was excellent/strong with Cohen k=0.92. QVSFS is a valid tool for verifying stroke-free status across culturally diverse populations in West Africa. © 2015 American Heart Association, Inc.

British Values and British Identity: Muddles, Mixtures, and Ways Ahead

Science.gov (United States)

Richardson, Robin

2015-01-01

In the final eleven months of its five-year term, the Coalition Government placed much emphasis in the education system on what it called fundamental British values (FBV). The phrase had its origins in counter-terrorism strategies that were of dubious validity both conceptually and operationally, and the trigger for its introduction into the…

Validation of the Paranoid Thoughts Scale in Iranian Population

Directory of Open Access Journals (Sweden)

Karim Abdolmohammadi

2016-11-01

Full Text Available Abstract Background and Objectives: Considering that paranoid thought has one-dimensional approach, use of long questionnaires has no clinical and research application, therefore use of short questionnaires seems necessary. The Green et al. paranoid thought scale is a short self-assessment tool for assessing paranoid thought in non-clinical and clinical group. This research was conducted to validate this questionnaire in Iranian population. Methods: In this cross-sectional survey, 356 students were selected using stratified sampling method and assessed by GPTS and Minnesota multiphasic paranoid inventory (MMPI in 2015. Validity was assessed simultaneously with MMPI testing. Results: The correlation coefficient of GPTS and MMPI scores was α=0.71 and significant (p<0.001. Internal consistency value was estimated to be 0.81 according to Cronbach's alpha coefficient. Conclusion: GPTS is an appropriate and short tool for screening in paranoid thought-related researches. Keywords: Paranoid disorders; Personality tests; Validation studies.

Recognizing vocal emotions in Mandarin Chinese: a validated database of Chinese vocal emotional stimuli.

Science.gov (United States)

Liu, Pan; Pell, Marc D

2012-12-01

To establish a valid database of vocal emotional stimuli in Mandarin Chinese, a set of Chinese pseudosentences (i.e., semantically meaningless sentences that resembled real Chinese) were produced by four native Mandarin speakers to express seven emotional meanings: anger, disgust, fear, sadness, happiness, pleasant surprise, and neutrality. These expressions were identified by a group of native Mandarin listeners in a seven-alternative forced choice task, and items reaching a recognition rate of at least three times chance performance in the seven-choice task were selected as a valid database and then subjected to acoustic analysis. The results demonstrated expected variations in both perceptual and acoustic patterns of the seven vocal emotions in Mandarin. For instance, fear, anger, sadness, and neutrality were associated with relatively high recognition, whereas happiness, disgust, and pleasant surprise were recognized less accurately. Acoustically, anger and pleasant surprise exhibited relatively high mean f0 values and large variation in f0 and amplitude; in contrast, sadness, disgust, fear, and neutrality exhibited relatively low mean f0 values and small amplitude variations, and happiness exhibited a moderate mean f0 value and f0 variation. Emotional expressions varied systematically in speech rate and harmonics-to-noise ratio values as well. This validated database is available to the research community and will contribute to future studies of emotional prosody for a number of purposes. To access the database, please contact pan.liu@mail.mcgill.ca.

Neural networks for predicting breeding values and genetic gains