WorldWideScience

Sample records for delamination growth rate

  1. Characterization of delamination onset and growth in a composite laminate

    Science.gov (United States)

    Obrien, T. K.

    1981-01-01

    The onset and growth of delaminations in unnotched (+ or - 30/+ or - 30/90/90 bar) sub S graphite epoxy laminates is described quantitatively. These laminates, designed to delaminate at the edges under tensile loads, were tested and analyzed. Delamination growth and stiffness loss were monitored nondestructively. Laminate stiffness decreased linearly with delamination size. The strain energy release rate, G, associated with delamination growth, was calculated from two analyses. A critical G for delamination onset was determined, and then was used to predict the onset of delaminations in (+45 sub n/-45 sub n/o sub n/90 sub n) sub s (n=1,2,3) laminates. A delamination resistance curve (R curve) was developed to characterize the observed stable delamination growth under quasi static loading. A power law correlation between G and delamination growth rates in fatigue was established.

  2. NUMERICAL ANALYSIS OF DELAMINATION GROWTH FOR STIFFENED COMPOSITE LAMINATED PLATES

    Institute of Scientific and Technical Information of China (English)

    白瑞祥; 陈浩然

    2004-01-01

    A study of postbuckling and delamination propagation behavior in delaminated stiffened composite plates was presented. A methodology was proposed for simulating the multi-failure responses, such as initial and postbuckling, delamination onset and propagation, etc. A finite element analysis was conducted on the basis of the Mindlin first order shear effect theory and the von-Krmn nonlinear deformation assumption. The total energy release rate used as the criteria of delamination growth was estimated with virtual crack closure technique (VCCT). A self-adaptive grid moving technology was adopted to model the delamination growth process. Moreover, the contact effect along delamination front was also considered during the numerical simulation process. By some numerical examples, the influence of distribution and location of stiffener, configuration and size of the delamination, boundary condition and contact effect upon the delamination growth behavior of the stiffened composite plates were investigated. The method and numerical conclusion provided should be of great value to engineers dealing with composite structures.

  3. Characterization of Mode I and Mode II delamination growth and thresholds in AS4/PEEK composites

    Science.gov (United States)

    Martin, Roderick H.; Murri, Gretchen Bostaph

    1990-01-01

    Composite materials often fail by delamination. The onset and growth of delamination in AS4/PEEK, a tough thermoplastic matrix composite, was characterized for mode 1 and mode 2 loadings, using the Double Cantilever Beam (DCB) and the End Notched Flexure (ENF) test specimens. Delamination growth per fatigue cycle, da/dN, was related to strain energy release rate, G, by means of a power law. However, the exponents of these power laws were too large for them to be adequately used as a life prediction tool. A small error in the estimated applied loads could lead to large errors in the delamination growth rates. Hence strain energy release rate thresholds, G sub th, below which no delamination would occur were also measured. Mode 1 and 2 threshold G values for no delamination growth were found by monitoring the number of cycles to delamination onset in the DCB and ENF specimens. The maximum applied G for which no delamination growth had occurred until at least 1,000,000 cycles was considered the threshold strain energy release rate. Comments are given on how testing effects, facial interference or delamination front damage, may invalidate the experimental determination of the constants in the expression.

  4. Characterization of Mode 1 and Mode 2 delamination growth and thresholds in graphite/peek composites

    Science.gov (United States)

    Martin, Roderick H.; Murri, Gretchen B.

    1988-01-01

    Composite materials often fail by delamination. The onset and growth of delamination in AS4/PEEK, a tough thermoplastic matrix composite, was characterized for mode 1 and mode 2 loadings, using the Double Cantilever Beam (DCB) and the End Notched Flexure (ENF) test specimens. Delamination growth per fatigue cycle, da/dN, was related to strain energy release rate, G, by means of a power law. However, the exponents of these power laws were too large for them to be adequately used as a life prediction tool. A small error in the estimated applied loads could lead to large errors in the delamination growth rates. Hence strain energy release rate thresholds, G sub th, below which no delamination would occur were also measured. Mode 1 and 2 threshold G values for no delamination growth were found by monitoring the number of cycles to delamination onset in the DCB and ENF specimens. The maximum applied G for which no delamination growth had occurred until at least 1,000,000 cycles was considered the threshold strain energy release rate. Comments are given on how testing effects, facial interference or delamination front damage, may invalidate the experimental determination of the constants in the expression.

  5. Development of a Benchmark Example for Delamination Fatigue Growth Prediction

    Science.gov (United States)

    Krueger, Ronald

    2010-01-01

    The development of a benchmark example for cyclic delamination growth prediction is presented and demonstrated for a commercial code. The example is based on a finite element model of a Double Cantilever Beam (DCB) specimen, which is independent of the analysis software used and allows the assessment of the delamination growth prediction capabilities in commercial finite element codes. First, the benchmark result was created for the specimen. Second, starting from an initially straight front, the delamination was allowed to grow under cyclic loading in a finite element model of a commercial code. The number of cycles to delamination onset and the number of cycles during stable delamination growth for each growth increment were obtained from the analysis. In general, good agreement between the results obtained from the growth analysis and the benchmark results could be achieved by selecting the appropriate input parameters. Overall, the results are encouraging but further assessment for mixed-mode delamination is required.

  6. Buckling and Delamination Growth Analysis of Composite Laminates Containing Embedded Delaminations

    Science.gov (United States)

    Hosseini-Toudeshky, H.; Hosseini, S.; Mohammadi, B.

    2010-04-01

    The objective of this work is to study the post buckling behavior of composite laminates, containing embedded delamination, under uniaxial compression loading. For this purpose, delamination initiation and propagation is modeled using the softening behavior of interface elements. The full layer-wise plate theory is also employed for approximating the displacement field of laminates and the interface elements are considered as a numerical layer between any two adjacent layers which delamination is expected to propagate. A finite element program was developed and the geometric non-linearity in the von karman sense is incorporated to the strain/displacement relations, to obtain the buckling behavior. It will be shown that, the buckling load, delamination growth process and buckling mode of the composite plates depends on the size of delamination and stacking sequence of the laminates.

  7. Evaluation of Delamination Growth Characterization Methods Under Mode I Fatigue Loading

    Science.gov (United States)

    Murri, Gretchen B.

    2012-01-01

    Reliable delamination characterization data for laminated composites are needed for input to analytical models of structures to predict delamination. The double-cantilevered beam (DCB) specimen is used with laminated composites to measure fracture toughness, G(sub Ic), delamination onset strain energy release rate, and growth rate data under cyclic loading. In the current study, DCB specimens of IM7/8552 graphite/epoxy supplied by two different manufacturers were tested in static and fatigue to compare the measured characterization data from the two sources, and to evaluate a proposed ASTM standard for generating Paris Law equations. Static results were used to generate compliance calibration constants for the fatigue data, and a delamination resistance curve, G(sub IR), which was used to determine the effects of fiber-bridging on delamination growth. Specimens were tested in fatigue at a cyclic G(sub Imax) level equal to 50, 40 or 30% of G(sub Ic), to determine a delamination onset curve and delamination growth rate. The delamination onset curve equations had similar exponents and the same trends. Delamination growth rate was calculated by fitting a Paris Law to the da/dN versus G(sub Imax) data. Both a 2-point and a 7-point data reduction method were used and the Paris Law equations were compared. To determine the effects of fiber-bridging, growth rate results were normalized by the delamination resistance curve for each material and compared to the non-normalized results. Paris Law exponents were found to decrease by 31% to 37% due to normalizing the growth data. Normalizing the data also greatly reduced the amount of scatter between the different specimens. Visual data records from the fatigue testing were used to calculate individual compliance calibration constants from the fatigue data for some of the specimens. The resulting da/dN versus G(sub Imax) plots showed much improved repeatability between specimens. Gretchen

  8. Delamination growth behavior in cross-ply composites under compressive cyclic (fatigue) loading

    Science.gov (United States)

    Pelegri, Assimina A.

    A mode dependent fatigue delamination growth law for anisotropic composite plates is presented in this thesis. The novelty of the presented law lies in the mode dependency of the material and laminate constants m(Psi) and C(Psi). The model describing the mode dependent delamination growth law consists of an initial postbuckling solution accounting for general delaminated composites, i.e. with no restrictive assumptions on the delamination dimensions, and a fracture mechanics solution. A numerical code was developed for the implementation of the closed form solution which gives the loading and geometrical quantities as well as the energy release rates and the mode mixities. The computer code was especially designed for parametric studies. Parameters assigned in this particular investigation were: end conditions, delamination position (h/T), and applied strain. The effect of the end conditions, i.e. clamped-clamped versus simply-supported ends on the initial postbuckling and growth behavior of delaminated plates was also investigated. In conjunction with the previous analysis, a detailed experimental study was designed and carried out in order to validate the proposed model. The tests were designed so that the effect of certain parameters on the delamination growth behavior could be evaluated. The parameters included in the investigation were: initial delamination length, applied strain and delamination position (h/T). Compressive static, compressive fatigue (constant displacement amplitude), and double cantilever beam (DCB) tests were conducted. Data acquisition and analysis for these tests were performed. By comparing analytical and experimental results it is shown that a very good correlation exists, and the presented mode dependent fatigue delamination growth law can accurately predict fatigue lives of delaminated composite structures.

  9. Evaluation of Delamination Onset and Growth Characterization Methods under Mode I Fatigue Loading

    Science.gov (United States)

    Murri, Gretchen B.

    2013-01-01

    Double-cantilevered beam specimens of IM7/8552 graphite/epoxy from two different manufacturers were tested in static and fatigue to compare the material characterization data and to evaluate a proposed ASTM standard for generating Paris Law equations for delamination growth. Static results were used to generate compliance calibration constants for reducing the fatigue data, and a delamination resistance curve, GIR, for each material. Specimens were tested in fatigue at different initial cyclic GImax levels to determine a delamination onset curve and the delamination growth rate. The delamination onset curve equations were similar for the two sources. Delamination growth rate was calculated by plotting da/dN versus GImax on a log-log scale and fitting a Paris Law. Two different data reduction methods were used to calculate da/dN. To determine the effects of fiber-bridging, growth results were normalized by the delamination resistance curves. Paris Law exponents decreased by 31% to 37% after normalizing the data. Visual data records from the fatigue tests were used to calculate individual compliance constants from the fatigue data. The resulting da/dN versus GImax plots showed improved repeatability for each source, compared to using averaged static data. The Paris Law expressions for the two sources showed the closest agreement using the individually fit compliance data.

  10. Development of Benchmark Examples for Delamination Onset and Fatigue Growth Prediction

    Science.gov (United States)

    Krueger, Ronald

    2011-01-01

    An approach for assessing the delamination propagation and growth capabilities in commercial finite element codes was developed and demonstrated for the Virtual Crack Closure Technique (VCCT) implementations in ABAQUS. The Double Cantilever Beam (DCB) specimen was chosen as an example. First, benchmark results to assess delamination propagation capabilities under static loading were created using models simulating specimens with different delamination lengths. For each delamination length modeled, the load and displacement at the load point were monitored. The mixed-mode strain energy release rate components were calculated along the delamination front across the width of the specimen. A failure index was calculated by correlating the results with the mixed-mode failure criterion of the graphite/epoxy material. The calculated critical loads and critical displacements for delamination onset for each delamination length modeled were used as a benchmark. The load/displacement relationship computed during automatic propagation should closely match the benchmark case. Second, starting from an initially straight front, the delamination was allowed to propagate based on the algorithms implemented in the commercial finite element software. The load-displacement relationship obtained from the propagation analysis results and the benchmark results were compared. Good agreements could be achieved by selecting the appropriate input parameters, which were determined in an iterative procedure.

  11. Discrete Spring Model for Predicting Delamination Growth in Z-Fiber Reinforced DCB Specimens

    Science.gov (United States)

    Ratcliffe, James G.; OBrien, T. Kevin

    2004-01-01

    Beam theory analysis was applied to predict delamination growth in Double Cantilever Beam (DCB) specimens reinforced in the thickness direction with pultruded pins, known as Z-fibers. The specimen arms were modeled as cantilever beams supported by discrete springs, which were included to represent the pins. A bi-linear, irreversible damage law was used to represent Z-fiber damage, the parameters of which were obtained from previous experiments. Closed-form solutions were developed for specimen compliance and displacements corresponding to Z-fiber row locations. A solution strategy was formulated to predict delamination growth, in which the parent laminate mode I critical strain energy release rate was used as the criterion for delamination growth. The solution procedure was coded into FORTRAN 90, giving a dedicated software tool for performing the delamination prediction. Comparison of analysis results with previous analysis and experiment showed good agreement, yielding an initial verification for the analytical procedure.

  12. Cathodic delamination: Quantification of ionic transport rates along coating-steel interfaces

    DEFF Research Database (Denmark)

    Sørensen, P.A.; Dam-Johansen, Kim; Weinell, C.E.

    2010-01-01

    and Fick's second law, under the assumption of a transport-controlled mechanism, show qualitative agreement with the observed delamination rates in 0.5 M sodium chloride. This confirms that the rate-determining step of cathodic delamination is the transport of sodium ions along the coating-steel interface....

  13. Cathodic delamination: Quantification of ionic transport rates along coating-steel interfaces

    DEFF Research Database (Denmark)

    Sørensen, Per Aggerholm; Dam-Johansen, Kim; Erik Weinell, Claus

    2010-01-01

    and Fick's second law, under the assumption of a transport controlled mechanism, show qualitative agreement with the observed delamination rates in 0.5 M sodium chloride. This confirms that the rate-determining step of cathodic delamination is the transport of sodium ions along the coating-steel interface...

  14. Development and Application of Benchmark Examples for Mode II Static Delamination Propagation and Fatigue Growth Predictions

    Science.gov (United States)

    Krueger, Ronald

    2011-01-01

    The development of benchmark examples for static delamination propagation and cyclic delamination onset and growth prediction is presented and demonstrated for a commercial code. The example is based on a finite element model of an End-Notched Flexure (ENF) specimen. The example is independent of the analysis software used and allows the assessment of the automated delamination propagation, onset and growth prediction capabilities in commercial finite element codes based on the virtual crack closure technique (VCCT). First, static benchmark examples were created for the specimen. Second, based on the static results, benchmark examples for cyclic delamination growth were created. Third, the load-displacement relationship from a propagation analysis and the benchmark results were compared, and good agreement could be achieved by selecting the appropriate input parameters. Fourth, starting from an initially straight front, the delamination was allowed to grow under cyclic loading. The number of cycles to delamination onset and the number of cycles during delamination growth for each growth increment were obtained from the automated analysis and compared to the benchmark examples. Again, good agreement between the results obtained from the growth analysis and the benchmark results could be achieved by selecting the appropriate input parameters. The benchmarking procedure proved valuable by highlighting the issues associated with choosing the input parameters of the particular implementation. Selecting the appropriate input parameters, however, was not straightforward and often required an iterative procedure. Overall the results are encouraging, but further assessment for mixed-mode delamination is required.

  15. Development of Benchmark Examples for Quasi-Static Delamination Propagation and Fatigue Growth Predictions

    Science.gov (United States)

    Krueger, Ronald

    2012-01-01

    The development of benchmark examples for quasi-static delamination propagation and cyclic delamination onset and growth prediction is presented and demonstrated for Abaqus/Standard. The example is based on a finite element model of a Double-Cantilever Beam specimen. The example is independent of the analysis software used and allows the assessment of the automated delamination propagation, onset and growth prediction capabilities in commercial finite element codes based on the virtual crack closure technique (VCCT). First, a quasi-static benchmark example was created for the specimen. Second, based on the static results, benchmark examples for cyclic delamination growth were created. Third, the load-displacement relationship from a propagation analysis and the benchmark results were compared, and good agreement could be achieved by selecting the appropriate input parameters. Fourth, starting from an initially straight front, the delamination was allowed to grow under cyclic loading. The number of cycles to delamination onset and the number of cycles during delamination growth for each growth increment were obtained from the automated analysis and compared to the benchmark examples. Again, good agreement between the results obtained from the growth analysis and the benchmark results could be achieved by selecting the appropriate input parameters. The benchmarking procedure proved valuable by highlighting the issues associated with choosing the input parameters of the particular implementation. Selecting the appropriate input parameters, however, was not straightforward and often required an iterative procedure. Overall the results are encouraging, but further assessment for mixed-mode delamination is required.

  16. Development of Benchmark Examples for Static Delamination Propagation and Fatigue Growth Predictions

    Science.gov (United States)

    Kruger, Ronald

    2011-01-01

    The development of benchmark examples for static delamination propagation and cyclic delamination onset and growth prediction is presented and demonstrated for a commercial code. The example is based on a finite element model of an End-Notched Flexure (ENF) specimen. The example is independent of the analysis software used and allows the assessment of the automated delamination propagation, onset and growth prediction capabilities in commercial finite element codes based on the virtual crack closure technique (VCCT). First, static benchmark examples were created for the specimen. Second, based on the static results, benchmark examples for cyclic delamination growth were created. Third, the load-displacement relationship from a propagation analysis and the benchmark results were compared, and good agreement could be achieved by selecting the appropriate input parameters. Fourth, starting from an initially straight front, the delamination was allowed to grow under cyclic loading. The number of cycles to delamination onset and the number of cycles during stable delamination growth for each growth increment were obtained from the automated analysis and compared to the benchmark examples. Again, good agreement between the results obtained from the growth analysis and the benchmark results could be achieved by selecting the appropriate input parameters. The benchmarking procedure proved valuable by highlighting the issues associated with the input parameters of the particular implementation. Selecting the appropriate input parameters, however, was not straightforward and often required an iterative procedure. Overall, the results are encouraging but further assessment for mixed-mode delamination is required.

  17. Characterization of Mode I and mixed-mode delamination growth in T300/5208 graphite/epoxy

    Science.gov (United States)

    Ramkumar, R. L.; Whitcomb, J. D.

    1985-01-01

    The roles played by Mode I and Mode II strain-energy release rates (G-I and G-II, respectively) in inducing delamination growth under static and fatigue loading were investigated, using T300/5208 graphite/epoxy specimens. Double cantilever beam (DCB) specimens and cracked lap shear (CLS) specimens were used for pure Mode I and mixed-mode tests, respectively. Fatigue-induced delamination growth was characterized by constant-amplitude fatigue tests at a minimum to maximum cyclic load ratio of 0.05 and a frequency of 10 Hz. During the tests, the maximum and minimum strain-energy release rates (Gmax, Gmin) and the delamination growth rate (da/dN) were monitored. Static tests on mixed-mode CLS specimens measured the total strain-energy release rate, which was broken into G-I and G-II components using finite-element analysis. A power-law relationship between da/dN and G-Imax, and da/dN and Gmax were obtained from fatigue test results on DCB and CLS specimens, respectively. The power law for a pure Mode II delamination was derived from CLS results by subtracting the contribution due to G-I.

  18. Experimental approach for mixed-mode fatigue delamination crack growth with large-scale bridging in polymer composites

    DEFF Research Database (Denmark)

    Holmes, John W.; Liu, Liu; Sørensen, Bent F.

    2014-01-01

    of delaminations in a typical fibre-reinforced polymer composite was investigated under a constant cyclic loading amplitude. Pure mode I, mode II and mixed-mode crack growth conditions were examined. The results, analysed using a J-integral approach, show that the double cantilever beam loaded with uneven bending......An experimental apparatus utilizing double cantilever beam specimens loaded with uneven bending moments was developed to study the mixed-mode fatigue crack growth in composites. The approach is suitable when large-scale bridging of cracks is present. To illustrate the testing method, cyclic growth...... crack growth rate observed. In addition to details concerning the equipment, a general discussion of the development of cyclic bridging laws for delamination growth in the presence of large-scale bridging is provided....

  19. The effect of transverse shear on the postbuckling and growth characteristics of delaminations in composites

    Energy Technology Data Exchange (ETDEWEB)

    Ferrie, C.H.; Sheinman, I.; Kardomateas, G.A.

    1999-10-01

    A geometrically nonlinear formulation for the behavior of composite delaminated beams of arbitrary stacking sequence, and with the effects of transverse shear deformation included, is presented. The formulation is based on a first-order shear deformation kinematic model, which incorporates the bending-stretching coupling effect and also assumes an arbitrary initial imperfection. The nonlinear differential equations are solved by Newton's method using a finite-difference scheme. The growth of the delamination is also studied by applying the J-integral in order to derive a formula for the energy release rate, which includes transverse shear. Results are presented which illustrate the shear effect, especially with respect to the ratio of the in-plane extensional over shear modulus and with respect to the ratio of plate length over thickness. It is seen that transverse shear can affect largely the displacement profiles, rendering the structure more compliant, and can promote growth by increasing the energy release rate, but this latter effect is moderate and mainly noticeable only at the later stages in the postbuckling regime.

  20. Reduction of cathodic delamination rates of anticorrosive coatings using free radical scavengers

    DEFF Research Database (Denmark)

    Sørensen, Per Aggerholm; Weinell, C. E.; Dam-Johansen, Kim

    2010-01-01

    Cathodic delamination is one of the major modes of failure for anticorrosive coatings subjected to a physical damage and immersed in seawater. The cause of cathodic delamination has been reported to be the result of a chemical attack at the coating-steel interface by free radicals and peroxides...... formed as intermediates in the cathodic reaction during the corrosion process. In this study, antioxidants (i.e., free radical scavengers and peroxide decomposers) have been incorporated into various generic types of coatings to investigate the effect of antioxidants on the rate of cathodic delamination...... of epoxy coatings on cold rolled steel. The addition of cathodic delamination by up to 50% during seawater immersion, while peroxide decomposers had a limited effect. Testing using substrates prepared from stainless steel...

  1. Buckling-driven delamination growth in composite laminates: Guidelines for assessing the threat posed by interlaminar matrix delamination

    DEFF Research Database (Denmark)

    Bhushan, Karihaloo; Stang, Henrik

    2008-01-01

    This paper is concerned with development of a simple procedure to assess the threat posed by interlaminar matrix delaminations to the integrity of composite laminates when they are situated in a compressive stress field. Depending upon the size of the delamination, its location below the surface...

  2. Fatigue Crack and Delamination Growth in Fibre Metal Laminates under Variable Amplitude Loading

    NARCIS (Netherlands)

    Khan, S.

    2013-01-01

    This thesis presents the investigation into the fatigue propagation and delamination growth of Fibre Metal Laminates under variable amplitude loading. As explained in the first chapter, the motivation of the research is twofold: first, to obtain a clear understanding and detailed characterization of

  3. Methods for the prediction of fatigue delamination growth in composites and adhesive bonds: A critical review

    NARCIS (Netherlands)

    Pascoe, J.A.; Alderliesten, R.C.; Benedictus, R.

    2013-01-01

    An overview is given of the development of methods for the prediction of fatigue driven delamination growth over the past 40 years. Four categories of methods are identified: stress/strain-based models, fracture mechanics based models, cohesive-zone models, and models using the extended finite eleme

  4. The concept of fatigue fracture toughness in fatigue delamination growth behavior

    NARCIS (Netherlands)

    Yao, L.; Alderliesten, R.C.; Benedictus, R.

    2015-01-01

    This paper provides a study on mode I fatigue delamination growth in composite laminates using energy principles. Experimental data has been obtained from fatigue tests conducted on Double Cantilever Beam (DCB) specimens at various stress ratios. A concept of fatigue fracture toughness is proposed t

  5. Non-destructive evaluation of delamination growth in glass fiber composites using optical coherence tomography

    Science.gov (United States)

    Liu, Ping; Groves, Roger M.; Benedictus, Rinze

    2014-03-01

    Based on low coherence interferometry, a robust optical coherence tomography (OCT) system has been built. The system was used to monitor the growth of a delamination between the middle layers of a glass fiber composite under a static loading. Firstly specimens of the material used for the spar webs in wind turbines were prepared with an interlaminar crack from free edges. Then they were statically loaded by a customized tensile test stage to extend the delamination length and simultaneously scanned by the OCT system. To process the acquired data, an optimized signal processing algorithm was developed. The cross-sectional images clearly show the microstructure and the crack within the specimen. The 3D crack profiles show the application of OCT to determine the evolution of the crack structure inside the composite material during the propagation of the delamination, for the first time to the best of our knowledge.

  6. Influence of Mixed Mode I-Mode II Loading on Fatigue Delamination Growth Characteristics of a Graphite Epoxy Tape Laminate

    Science.gov (United States)

    Ratcliffe, James G.; Johnston, William M., Jr.

    2014-01-01

    Mixed mode I-mode II interlaminar tests were conducted on IM7/8552 tape laminates using the mixed-mode bending test. Three mixed mode ratios, G(sub II)/G(sub T) = 0.2, 0.5, and 0.8, were considered. Tests were performed at all three mixed-mode ratios under quasi-static and cyclic loading conditions, where the former static tests were used to determine initial loading levels for the latter fatigue tests. Fatigue tests at each mixed-mode ratio were performed at four loading levels, Gmax, equal to 0.5G(sub c), 0.4G(sub c), 0.3G(sub c), and 0.2G(sub c), where G(sub c) is the interlaminar fracture toughness of the corresponding mixed-mode ratio at which a test was performed. All fatigue tests were performed using constant-amplitude load control and delamination growth was automatically documented using compliance solutions obtained from the corresponding quasi-static tests. Static fracture toughness data yielded a mixed-mode delamination criterion that exhibited monotonic increase in Gc with mixed-mode ratio, G(sub II)/G(sub T). Fatigue delamination onset parameters varied monotonically with G(sub II)/G(sub T), which was expected based on the fracture toughness data. Analysis of non-normalized data yielded a monotonic change in Paris law exponent with mode ratio. This was not the case when normalized data were analyzed. Fatigue data normalized by the static R-curve were most affected in specimens tested at G(sub II)/G(sub T)=0.2 (this process has little influence on the other data). In this case, the normalized data yielded a higher delamination growth rate compared to the raw data for a given loading level. Overall, fiber bridging appeared to be the dominant mechanism, affecting delamination growth rates in specimens tested at different load levels and differing mixed-mode ratios.

  7. THE INFLUENCE OF THE TOOL POINT ANGLE AND FEED RATE ON THE DELAMINATION AT DRILLING OF PRE-LAMINATED PARTICLEBOARD

    Directory of Open Access Journals (Sweden)

    Mihai ISPAS

    2015-12-01

    Full Text Available Pre-laminated particleboard is a wood based composite extensively used in the furniture industry. Drilling is the most common machining process which prepares the panels for joining using twist/helical drills in the absolute majority of cases. The point angle of the drill bit and the feed speed during drilling play a major role in gaining a good surface quality and minimizing the delamination tendency of the pre-laminated particleboard. The objective of this study was to measure and analyze the influence of the two above-mentioned factors on the processing quality, evaluated by de size of delaminations, both, at the entrance side and the exit side of the drill bit. To assess the defect, two parameters were used: the delamination factor and the effective area of delamination. The results showed that, in general, the combination of small point angle with low feed rate minimizes the delamination of pre-laminated particleboard panels at drilling.

  8. Delamination tolerance studies in laminated composite panels

    Indian Academy of Sciences (India)

    K L Singh; B Dattaguru; T S Ramamurthy; P D Mangalgiri

    2000-08-01

    Determination of levels of tolerance in delaminated composite panels is an important issue in composite structures technology. The primary intention is to analyse delaminated composite panels and estimate Strain Energy Release Rate (SERR) parameters at the delamination front to feed into acceptability criteria. Large deformation analysis is necessary to cater for excessive rotational deformations in the delaminated sublaminate. Modified Virtual Crack Closure Integral (MVCCI) is used to estimate all the three SERR components at the delamination front from the finite element output containing displacements, strains and stresses. The applied loading conditions are particularly critical and compressive loading on the panel could lead to buckling of the delaminated sublaminate and consequent growth of delamination. Numerical results are presented for circular delamination of varioussizes and delamination at various interfaces (varying depth-wise location) between the base- and the sub-laminates. Numerical data are also presented on the effect of bi-axial loading and in particular on compressive loading in both directions. The results can be used to estimate delamination tolerance at various depths (or at various interfaces) in the laminate.

  9. Mode Mixity for Orthotropic Interface Delamination in Laminated Composites

    Institute of Scientific and Technical Information of China (English)

    FAN Xue-ling; SUN Qin; YUAN Mei-ni; Masanori Kikuchi

    2009-01-01

    The mode mixity is defined based on nonoscillatory strain energy release rate components of delamination between two different orthotropic materials to evaluate the delamination behavior of laminated composites.The result showes that the relative location of the delamination through the thickness influences the mode mixity in a relatively well-regulated way,and that the reinforcement directions of the adjacent plies along the delamination front have a more complicated impact on the mode mixity.This is caused by the bending/twist coupling and bending/bending coupling in the stress field at the crack tip for delamination between multidirectional plies,which completely modifies the stress and strain fields ahead of the crack tip.These kinds of couplings account for the non-uniform distribution of mode mixity values along the delamination front.Application of appropriate mode mixity values is necessary for accurate prediction of delamination growth.

  10. In Search of a Time Efficient Approach to Crack and Delamination Growth Predictions in Composites

    Science.gov (United States)

    Krueger, Ronald; Carvalho, Nelson

    2016-01-01

    Analysis benchmarking was used to assess the accuracy and time efficiency of algorithms suitable for automated delamination growth analysis. First, the Floating Node Method (FNM) was introduced and its combination with a simple exponential growth law (Paris Law) and Virtual Crack Closure technique (VCCT) was discussed. Implementation of the method into a user element (UEL) in Abaqus/Standard(Registered TradeMark) was also presented. For the assessment of growth prediction capabilities, an existing benchmark case based on the Double Cantilever Beam (DCB) specimen was briefly summarized. Additionally, the development of new benchmark cases based on the Mixed-Mode Bending (MMB) specimen to assess the growth prediction capabilities under mixed-mode I/II conditions was discussed in detail. A comparison was presented, in which the benchmark cases were used to assess the existing low-cycle fatigue analysis tool in Abaqus/Standard(Registered TradeMark) in comparison to the FNM-VCCT fatigue growth analysis implementation. The low-cycle fatigue analysis tool in Abaqus/Standard(Registered TradeMark) was able to yield results that were in good agreement with the DCB benchmark example. Results for the MMB benchmark cases, however, only captured the trend correctly. The user element (FNM-VCCT) always yielded results that were in excellent agreement with all benchmark cases, at a fraction of the analysis time. The ability to assess the implementation of two methods in one finite element code illustrated the value of establishing benchmark solutions.

  11. Mode I fatigue delamination growth in composite laminates with fibre bridging

    NARCIS (Netherlands)

    Yao, L.

    2015-01-01

    Advanced composite materials have been commonly used in aerospace engineering, because of their good mechanical properties and attractive potential for creating lightweight structures. Susceptibility to delamination is one of the most important issues in the applications of these materials. This

  12. Cathodic delamination of seawater-immersed anticorrosive coatings: Mapping of parameters affecting the rate

    DEFF Research Database (Denmark)

    Sørensen, Per Aggerholm; Dam-Johansen, Kim; Weinell, C. E.

    2010-01-01

    -steel interface, where solid iron is oxidized to ferrous ions and oxygen is reduced to hydroxyl ions. In this work, the effects of various parameters on cathodic delamination have been investigated. The parameters are: permeability of the coating, concentration of dissolved oxygen and cations, polarization...

  13. Mode I fatigue delamination growth in composite laminates with fibre bridging

    NARCIS (Netherlands)

    Yao, L.

    2015-01-01

    Advanced composite materials have been commonly used in aerospace engineering, because of their good mechanical properties and attractive potential for creating lightweight structures. Susceptibility to delamination is one of the most important issues in the applications of these materials. This dis

  14. 湿热载荷下含损伤夹层板分层扩展判定分析%Delamination Growth of Composite Sandwich under Hygrothermal and Mechanical Loads

    Institute of Scientific and Technical Information of China (English)

    张志民; 李向阳

    2001-01-01

    The local buckling may occur in composite sandwich with delamination induced by impact damage. This often causes delamination growth and structure failure. The delamiantion growth is studied by using the variational method of moving boundary, and the formulas of energy release rate G along the delamination front are obtained. By employing Rayleigh-Ritz method, the hygrothermal effect on buckling character of composite sandwich plates containing delamination between two faceplate laminae is studied.%含面板内分层损伤的复合材料夹层板在承受压缩载荷时,很容易发生局部屈曲,导致分层扩展和结构失效,恶劣的湿热环境更是使之加剧.利用可动边界变分问题对分层扩展进行了分析,导出了分层边界的逐点能量释放率表达式,采用Rayleigh-Ritz法研究了任意的湿热环境对含损伤的复合材料夹层板分层扩展性能的影响.

  15. In situ characterization of delamination and crack growth of a CGO–LSM multi-layer ceramic sample investigated by X-ray tomographic microscopy

    DEFF Research Database (Denmark)

    Bjørk, Rasmus; Esposito, Vincenzo; Lauridsen, Erik Mejdal;

    2014-01-01

    The densification, delamination and crack growth behavior in a Ce0.9Gd0.1O1.95 (CGO) and (La0.85Sr0.15)0.9MnO3 (LSM) multi-layer ceramic sample was studied using in situ X-ray tomographic microscopy (microtomography) to investigate the critical dynamics of crack propagation and delamination...... in a multilayered sample. Naturally occurring defects, caused by the sample preparation process, are shown not to be critical in sample degradation. Instead defects are nucleated during the debinding step. Crack growth is significantly faster along the material layers than perpendicular to them, and crack growth...

  16. Energy based study of quasi-static delamination as a low cycle fatigue process

    NARCIS (Netherlands)

    Amaral, L.; Yao, L.; Alderliesten, R.C.; Benedictus, R.

    2015-01-01

    This work proposes to treat quasi-static mode I delamination growth of CFRP as a low-cycle fatigue process. To this end, mode I quasi-static and fatigue delamination tests were performed. An average physical Strain Energy Release Rate (SERR), derived from an energy balance, is used to characterize t

  17. Energy based study of quasi-static delamination as a low cycle fatigue process

    NARCIS (Netherlands)

    Amaral, L.; Yao, L.; Alderliesten, R.C.; Benedictus, R.

    2015-01-01

    This work proposes to treat quasi-static mode I delamination growth of CFRP as a low-cycle fatigue process. To this end, mode I quasi-static and fatigue delamination tests were performed. An average physical Strain Energy Release Rate (SERR), derived from an energy balance, is used to characterize

  18. Frequency Population Growth Rate

    Directory of Open Access Journals (Sweden)

    Nouralah Salehi Asfiji

    2012-10-01

    Full Text Available The Solow growth model assumes that labor force grows exponentially. That is not a realistic assumption. In generalized logistic equations that describes more accurately population growth. Economic growth is not a smooth process. Real GDP has fluctuations in the growth rate. We call these fluctuations business cycles. Business cycle theory came about from the failures of classical economics in being able to illuminate on the causes of the Great Depression. The logistic growth model to explain changes in population growth rates are not. In this paper a new analysis of the population growth rate in the frequency space is described with mathematical logic and economic reasoning, so that, firstly, to a higher level of capital per capita, or at least equal to the Solow growth model reaches Second, the limits of saturation (Carrying-Capacity is not, and ultimately, population growth rates have an impact on long-term per capita amounts. The initial classic assumption is changed in this article based on the available frequencies in the population growth equation.

  19. On the Through-the-Width Multiple Delamination, and Buckling and Postbuckling Behaviors of Symmetric and Unsymmetric Composite Laminates

    Science.gov (United States)

    Liu, P. F.; Zheng, J. Y.

    2013-12-01

    Multiple delamination causes severe degradation of the stiffness and strength of composites. Interactions between multiple delamination, and buckling and postbuckling under compressive loads add the complexity of mechanical properties of composites. In this paper, the buckling, postbuckling and through-the-width multiple delamination of symmetric and unsymmetric composite laminates are studied using 3D FEA, and the virtual crack closure technique with two delamination failure criteria: B-K law and power law is used to predict the delamination growth and to calculate the mixed-mode energy release rate. The compressive load-strain curves, load-central deflection curves and multiple delamination process for eight composite specimens with different initial delamination sizes and their distributions as well as two angle-ply configurations 04//(± θ)6//04 ( θ = 0° and 45°, and "//" denotes the delaminated interface) are comparatively studied. From numerical results, the unsymmetry decreases the local buckling load and initial delamination load, but does not affect the global buckling load compared with the symmetric laminates. Besides, the unsymmetry affects the unstable delamination and buckling behaviors of composite laminates largely when the initial multiple delamination sizes are relatively small.

  20. Cyclic delamination behavior of plasma-sprayed hydroxyapatite coating on Ti-6Al-4V substrates in simulated body fluid.

    Science.gov (United States)

    Otsuka, Yuichi; Kawaguchi, Hayato; Mutoh, Yoshiharu

    2016-10-01

    This study aimed to clarify the effect of a simulated body fluid (SBF) on the cyclic delamination behavior of a plasma-sprayed hydroxapatite (HAp) coating. A HAp coating is deposited on the surfaces of surgical metallic materials in order to enhance the bond between human bone and such surfaces. However, the HAp coating is susceptible to delamination by cyclic loading from the patient's gait. Although hip joints are subjected to both positive and negative moments, only the effects of tensile bending stresses on vertical crack propagation behavior have been investigated. Thus, the cyclic delamination behavior of a HAp coating was observed at the stress ratio R=-1 in order to determine the effects of tensile/compressive loading on the delamination behavior. The delamination growth rate increased with SBF immersion, which decreased the delamination life. Raman spectroscopy analysis revealed that the selective phase dissolution in the HAp coating was promoted at interfaces. Finite element analysis revealed that the energy release rate Gmax showed a positive value even in cases with compressive loading, which is a driving force for the delamination of a HAp coating. A prediction model for the delamination growth life was developed that combines a fracture mechanics parameter with the assumed stress-dependent dissolution rate. The predicted delamination life matched the experimental data well in cases of lower stress amplitudes with SBF. Copyright © 2016 Elsevier B.V. All rights reserved.

  1. Adhesive-Bonded Composite Joint Analysis with Delaminated Surface Ply Using Strain-Energy Release Rate

    Science.gov (United States)

    Chadegani, Alireza; Yang, Chihdar; Smeltzer, Stanley S. III

    2012-01-01

    This paper presents an analytical model to determine the strain energy release rate due to an interlaminar crack of the surface ply in adhesively bonded composite joints subjected to axial tension. Single-lap shear-joint standard test specimen geometry with thick bondline is followed for model development. The field equations are formulated by using the first-order shear-deformation theory in laminated plates together with kinematics relations and force equilibrium conditions. The stress distributions for the adherends and adhesive are determined after the appropriate boundary and loading conditions are applied and the equations for the field displacements are solved. The system of second-order differential equations is solved to using the symbolic computation tool Maple 9.52 to provide displacements fields. The equivalent forces at the tip of the prescribed interlaminar crack are obtained based on interlaminar stress distributions. The strain energy release rate of the crack is then determined by using the crack closure method. Finite element analyses using the J integral as well as the crack closure method are performed to verify the developed analytical model. It has been shown that the results using the analytical method correlate well with the results from the finite element analyses. An attempt is made to predict the failure loads of the joints based on limited test data from the literature. The effectiveness of the inclusion of bondline thickness is justified when compared with the results obtained from the previous model in which a thin bondline and uniform adhesive stresses through the bondline thickness are assumed.

  2. Micromechanical models of delamination in aluminum-lithium alloys

    Science.gov (United States)

    Messner, Mark Christian

    Aluminum lithium (Al-Li) alloys are lighter, stiffer, and tougher than conventional aerospace aluminum alloys. Replacing conventional aluminums with Al-Li could substantially decrease the weight and cost of aerospace structures. However, Al-Li alloys often fracture intergranularly via a mechanism called delamination cracking. While secondary delamination cracks can improve the effective toughness of a component, no current model accurately predicts the initiation and growth of intergranular cracks. Since simulations cannot incorporate delamination into a structural model, designers cannot quantify the effect of delamination cracking on a particular component. This uncertainty limits the application of Al-Li alloys. Previous experiments identify microstructural features linked to delamination. Fractography of failed surfaces indicates plastic void growth triggers intergranular failure. Furthermore, certain types of soft/stiff grain boundaries tend to localize void growth and nucleate delamination cracks. This dissertation develops a mechanism for the initiation of delamination on the microscale that accounts for these experimental observations. Microscale simulations of grain boundaries near a long primary crack explore the delamination mechanism on the mesoscale. In these simulations, a physically-based crystal plasticity (CP) model represents the constitutive response of individual grains. This CP model incorporates plastic voriticity correction terms into a standard objective stress rate integration, to accurately account for the kinematics of lattice deformation. The CP model implements slip system hardening with a modular approach to facilitate quick testing and calibration of different theories of hardening. The microscale models reveal soft/stiff grain boundaries develop elevated mean stress and plastic strain as a consequence of the mechanics of the interface. These elevated stresses and strain drive plastic void growth. The results indicate plastic void

  3. Packaging issues: avoiding delamination.

    Science.gov (United States)

    Hall, R

    2005-10-01

    Manufacturers can minimise delamination occurrence by applying the appropriate packaging design and process features. The end user can minimise the impact of fibre tear and reduce subsequent delamination by careful package opening. The occasional inconvenient delamination is a small price to pay for the high level of sterility assurance that comes with the use of Tyvek.

  4. Thermally induced delamination of multilayers

    DEFF Research Database (Denmark)

    Sørensen, Bent F.; Sarraute, S.; Jørgensen, O.

    1998-01-01

    Steady-state delamination of multilayered structures, caused by stresses arising during processing due to thermal expansion mismatch, is analyzed by a fracture mechanics model based on laminate theory. It is found that inserting just a few interlayers with intermediate thermal expansion coefficie...... coefficients may be an effective way of reducing the delamination energy release rate. Uneven layer thickness and increasing elastic mismatch are shown to raise the energy release rate. Experimental work confirms important trends of the model.......Steady-state delamination of multilayered structures, caused by stresses arising during processing due to thermal expansion mismatch, is analyzed by a fracture mechanics model based on laminate theory. It is found that inserting just a few interlayers with intermediate thermal expansion...

  5. Influence of substrate topography on cathodic delamination of anticorrosive coatings

    DEFF Research Database (Denmark)

    Sørensen, Per Aggerholm; Kiil, Søren; Dam-Johansen, Kim

    2009-01-01

    The cathodic delamination of a commercial magnesium silicate and titanium dioxide pigmented epoxy coating on abrasive cleaned cold rolled steel has been investigated. The rate of delamination was found to depend on interfacial transport from the artificial defect to the delamination front...... and thereby the substrate topography, whereas the coating thickness had little influence. The presence of a significant potential gradient between the anode and the cathode and the dependency of the delamination rate on the tortuosity of the steel surface suggests that cathodic delamination is controlled...... by migration of cations from the defect to the delamination front. This means that abrasive blasting, to some extent, can be applied to control and minimize the observed rate of cathodic delamination. The lifetime of the species causing disbondment suggested that sodium hydroxide or potassium hydroxide...

  6. Internal-Notched Flexure Test for Measurement of Mode II Delamination Resistance of Fibre-Reinforced Polymers

    Directory of Open Access Journals (Sweden)

    Chengye Fan

    2013-01-01

    Full Text Available This paper introduces a new test, method, named internal-notched flexure (INF test, that is designed to measure the critical energy release rate of fibre-reinforced polymers for delamination growth in shear mode (mode II. The INF test generates stable delamination growth, with a monotonic increase of load and displacement in a nearly linear fashion. Values of the mode II delamination toughness were deduced using experimental compliance fitting method. Good repeatability of the results was obtained. Compared with the end-notched flexure (ENF test using the same material, the INF test yielded higher delamination resistance, possibly due to the bridging fibres found between fracture surfaces of the INF test specimens.

  7. Combined effect of matrix cracking and stress-free edge on delamination

    Science.gov (United States)

    Salpekar, S. A.; Obrien, T. K.

    1990-01-01

    The effect of the stress-free edge on the growth of local delaminations initiating from a matrix crack in (0 sub 2/90 sub 4) sub s and (+ or - 45.90 sub 4) sub s glass epoxy laminates is investigated using 3-D finite element analysis. The presence of high interlaminar normal stresses at the intersection (corner) of the matrix crack with the stress-free edge, suggests that a mode I delamination may initiate at the corners. The strain energy release rates (G) were calculated by modeling a uniform through-width delamination and two inclined delaminations at 10.6 deg and 45 deg to the matrix crack. All components of G have high values near the free edges. The mode I component of G is high at small delamination length and becomes zero for a delamination length of one-ply thickness. The total G values near the free edge agreed well with previously derived closed form solution. The quasi-3D solutions agreed well with the 3-D interior solutions.

  8. Delamination of Composite Cylinders

    Science.gov (United States)

    Davies, Peter; Carlsson, Leif A.

    The delamination resistance of filament wound glass/epoxy cylinders has been characterized for a range of winding angles and fracture mode ratios using beam fracture specimens. The results reveal that the delamination fracture resistance increases with increasing winding angle and mode II (shear) fraction (GΠ/G). It was also found that interlaced fiber bundles in the filament wound cylinder wall acted as effective crack arresters in mode I loading. To examine the sensitivity of delamina-tion damage on the strength of the cylinders, external pressure tests were performed on filament-wound glass/epoxy composite cylinders with artificial defects and impact damage. The results revealed that the cylinder strength was insensitive to the presence of single delaminations but impact damage caused reductions in failure pressure. The insensitivity of the failure pressure to a single delamination is attributed to the absence of buckling of the delaminated sublaminates before the cylinder wall collapsed. The impacted cylinders contained multiple delaminations, which caused local reduction in the compressive load capability and reduction in failure pressure. The response of glass/epoxy cylinders was compared to impacted carbon reinforced cylinders. Carbon/epoxy is more sensitive to damage but retains higher implosion resistance while carbon/PEEK shows the opposite trend.

  9. Buckling-driven delamination of carbon nanotube forests

    Science.gov (United States)

    Pour Shahid Saeed Abadi, Parisa; Hutchens, Shelby B.; Greer, Julia R.; Cola, Baratunde A.; Graham, Samuel

    2013-06-01

    We report buckling-driven delamination of carbon nanotube (CNT) forests from their growth substrates when subjected to compression. Macroscale compression experiments reveal local delamination at the CNT forest-substrate interface. Results of microscale flat punch indentations indicate that enhanced CNT interlocking at the top surface of the forest accomplished by application of a metal coating causes delamination of the forest from the growth substrate, a phenomenon not observed in indentation of as-grown CNT forests. We postulate that the post-buckling tensile stresses that develop at the base of the CNT forests serve as the driving force for delamination.

  10. Growth rate for blackhole instabilities

    Science.gov (United States)

    Prabhu, Kartik; Wald, Robert

    2015-04-01

    Hollands and Wald showed that dynamic stability of stationary axisymmetric black holes is equivalent to positivity of canonical energy on a space of linearised axisymmetric perturbations satisfying certain boundary and gauge conditions. Using a reflection isometry of the background, we split the energy into kinetic and potential parts. We show that the kinetic energy is positive. In the case that potential energy is negative, we show existence of exponentially growing perturbations and further obtain a variational formula for the growth rate.

  11. THE EFFECT OF SUPPORT PLATE ON DRILLING-INDUCED DELAMINATION

    Directory of Open Access Journals (Sweden)

    Navid Zarif Karimi

    2016-02-01

    Full Text Available Delamination is considered as a major problem in drilling of composite materials, which degrades the mechanical properties of these materials. The thrust force exerted by the drill is considered as the major cause of delamination; and one practical approach to reduce delamination is to use a back-up plate under the specimen. In this paper, the effect of exit support plate on delamination in twist drilling of glass fiber reinforced composites is studied. Firstly, two analytical models based on linear fracture mechanics and elastic bending theory of plates are described to find critical thrust forces at the beginning of crack growth for drilling with and without back-up plate. Secondly, two series of experiments are carried out on glass fiber reinforced composites to determine quantitatively the effect of drilling parameters on the amount of delamination. Experimental findings verify a large reduction in the amount of delaminated area when a back-up plate is placed under the specimen.

  12. Fractography of composite delamination

    Science.gov (United States)

    Bascom, W. D.

    1990-01-01

    The microdamage that occurs for Mode 1 and Mode 2 delamination was examined by potting delaminated specimens in a clear epoxy, sectioning through the damage, polishing the cut sections and examining using light microscopy. For Mode 1 delamination of unidirectional carbon fiber reinforced plastic (CFRP) composites, the major observation was fiber bridging including large ligaments of fiber bundles. The Mode 2 delamination of unidirectional laminates revealed a very narrow crack opening with only occasional fiber bridging. Impact testing by repetitive impacts with increasing energy was studied and it was found that this technique does not discern changes in the type of damage with increasing cumulative impact energy. Instead, the changes in the impact response, notably stiffness, are the result of changes in the extent of damage. For laminates with a brittle thermoplastic matrix, 3501-6, there were distinct changes in stiffness that corresponded to the development of through the thickness damage and then to the extension of the damage to the specimen edges. For PEEK and polycarbonate, the changes in stiffness were not as abrupt as for the thermoset. None the less, the damage progressed in the same manner.

  13. Compressive behavior of composite panels with deeply embedded delamination%Compressive behavior of composite panels with deeply embedded delamination

    Institute of Scientific and Technical Information of China (English)

    FU Hui-min; PENG Bo

    2012-01-01

    The compressive behavior of laminates with a deeply embedded circular delamination was studied numerically and experimentally.In the finite element analysis(FEA),virtual crack closure technique(VCCT) and B-K law were employed to simulate the delamination growth,and the contact of the two substrates was considered.The effect of the delamination size and through-thickness position on the compressive behavior of laminates with an artificially embedded circular delamination was discussed.It is found that the through-thickness position affects the buckling mode,which then strongly influences delamination growth speed and direction,as well as the dominant component energy release rate(ERR).The numerical results agreed well with the experimental results.

  14. Subduction to Continental Delamination: Insights From Laboratory Experiments

    Science.gov (United States)

    Gogus, O. H.; Corbi, F.; Faccenna, C.; Pysklywec, R. N.

    2009-05-01

    The evolution of the lithosphere through subduction-collision and delamination and its surface/crustal response (topography/deformation) is investigated in this work. We present a series of lithosphere scale two dimensional (2-D) and three dimensional (3-D) laboratory experiments to better understand such processes. In these experiments, an idealized viscously deforming crust-mantle lithosphere-mantle system is configured with silicone putty (representing lithospheric mantle and upper crust) and glucose syrup (representing the upper mantle and lower crust). The initial focus was to investigate the physical development of delamination versus continental subduction without plate convergence. Experiments show that the delamination or continental subduction is strongly dependent on the density of the crust (both crust and mantle lithosphere subducts when crust has a higher density, instead of delamination), while in the investigated range, the viscosity of the weak layer does not have much influence on the process. In all the experiments, the topography is asymmetric with subsidence above the delaminating hinge due to the dynamic vertical pulling driven by the delaminating slab, and uplift above the delaminated region due to the buoyancy of asthenosphere. Our investigation on the oceanic subduction with a convergence rate of ~ 3cm/year plate velocity suggests that subduction -collision - delamination is well defined and at the end, the delaminating crust from the lithosphere is overthrusted on top of the overriding plate. Our results provide integrated insights on the Alpine-Himalayan type orogenies, in particular the neotectonic evolution of Eastern Anatolian plateau.

  15. The Effect of Substrate Topography on Coating Cathodic Delamination

    DEFF Research Database (Denmark)

    Weinell, Claus E.; Sørensen, Per A.; Kiil, Søren

    2011-01-01

    This article describes the effect of steel substrate topography on coating cathodic delamination. The study showed that the surface preparation can be used to control and minimize the rate of cathodic delamination. The coating should have maximum wetting properties so that substrates with high...

  16. Methods of modelling relative growth rate

    Institute of Scientific and Technical Information of China (English)

    Arne Pommerening; Anders Muszta

    2015-01-01

    Background:Analysing and modelling plant growth is an important interdisciplinary field of plant science. The use of relative growth rates, involving the analysis of plant growth relative to plant size, has more or less independently emerged in different research groups and at different times and has provided powerful tools for assessing the growth performance and growth efficiency of plants and plant populations. In this paper, we explore how these isolated methods can be combined to form a consistent methodology for modelling relative growth rates. Methods:We review and combine existing methods of analysing and modelling relative growth rates and apply a combination of methods to Sitka spruce (Picea sitchensis (Bong.) Carr.) stem-analysis data from North Wales (UK) and British Douglas fir (Pseudotsuga menziesi (Mirb.) Franco) yield table data. Results:The results indicate that, by combining the approaches of different plant-growth analysis laboratories and using them simultaneously, we can advance and standardise the concept of relative plant growth. Particularly the growth multiplier plays an important role in modelling relative growth rates. Another useful technique has been the recent introduction of size-standardised relative growth rates. Conclusions:Modelling relative growth rates mainly serves two purposes, 1) an improved analysis of growth performance and efficiency and 2) the prediction of future or past growth rates. This makes the concept of relative growth ideally suited to growth reconstruction as required in dendrochronology, climate change and forest decline research and for interdisciplinary research projects beyond the realm of plant science.

  17. Methods of modelling relative growth rate

    Directory of Open Access Journals (Sweden)

    Arne Pommerening

    2015-03-01

    Full Text Available Background Analysing and modelling plant growth is an important interdisciplinary field of plant science. The use of relative growth rates, involving the analysis of plant growth relative to plant size, has more or less independently emerged in different research groups and at different times and has provided powerful tools for assessing the growth performance and growth efficiency of plants and plant populations. In this paper, we explore how these isolated methods can be combined to form a consistent methodology for modelling relative growth rates. Methods We review and combine existing methods of analysing and modelling relative growth rates and apply a combination of methods to Sitka spruce (Picea sitchensis (Bong. Carr. stem-analysis data from North Wales (UK and British Douglas fir (Pseudotsuga menziesii (Mirb. Franco yield table data. Results The results indicate that, by combining the approaches of different plant-growth analysis laboratories and using them simultaneously, we can advance and standardise the concept of relative plant growth. Particularly the growth multiplier plays an important role in modelling relative growth rates. Another useful technique has been the recent introduction of size-standardised relative growth rates. Conclusions Modelling relative growth rates mainly serves two purposes, 1 an improved analysis of growth performance and efficiency and 2 the prediction of future or past growth rates. This makes the concept of relative growth ideally suited to growth reconstruction as required in dendrochronology, climate change and forest decline research and for interdisciplinary research projects beyond the realm of plant science.

  18. The Optimum Growth Rate for Population Reconsidered

    OpenAIRE

    Jaeger, Klaus; Kuhle, Wolfgang

    2007-01-01

    This article gives exact general conditions for the existence of an interior optimum growth rate for population in the neoclassical two-generations-overlapping model. In an economy where high (low) growth rates of population lead to a growth path which is efficient (inefficient) there always exists an interior optimum growth rate for population. In all other cases there exists no interior optimum. The Serendipity Theorem, however, does in general not hold in an economy with government debt. M...

  19. The evolution of growth trajectories: what limits growth rate?

    Science.gov (United States)

    Dmitriew, Caitlin M

    2011-02-01

    According to life-history theory, growth rates are subject to strong directional selection due to reproductive and survival advantages associated with large adult body size. Yet, growth is commonly observed to occur at rates lower than the maximum that is physiologically possible and intrinsic growth rates often vary among populations. This implies that slower growth is favoured under certain conditions. Realized growth rate is thus the result of a compromise between the costs and advantages of growing rapidly, and the optimal rate of growth is not equivalent to the fundamental maximum rate. The ecological and evolutionary factors influencing growth rate are reviewed, with particular emphasis on how growth might be constrained by direct fitness costs. Costs of accelerating growth might contribute to the variance in fitness that is not attributable to age or size at maturity, as well as to the variation in life-history strategies observed within and among species. Two main approaches have been taken to study the fitness trade-offs relating to growth rate. First, environmental manipulations can be used to produce treatment groups with different rates of growth. Second, common garden experiments can be used to compare fitness correlates among populations with different intrinsic growth rates. Data from these studies reveal a number of potential costs for growth over both the short and long term. In order to acquire the energy needed for faster growth, animals must increase food intake. Accordingly, in many taxa, the major constraint on growth rate appears to arise from the trade-off between predation risk and foraging effort. However, growth rates are also frequently observed to be submaximal in the absence of predation, suggesting that growth trajectories also impact fitness via other channels, such as the reallocation of finite resources between growth and other traits and functions. Despite the prevalence of submaximal growth, even when predators are absent, there

  20. Orogenic delamination - dynamics, effects, and geological expression

    Science.gov (United States)

    Ueda, Kosuke; Gerya, Taras

    2010-05-01

    collision rate, melting and hydration, the latter two incorporating the effects of sediment subduction and phase changes. The drag available for slab retreat scales with the age of the descending oceanic lithosphere; integrated strength of the lithosphere and activation volume for mantle creep additionally control angle and depth of the descent. Fully developed delamination is observed from between 10 to 15 Ma after collision ceases, with following trenchward migration of the delamination front. Consequently, the main maximum extension migrates, while local, partly intermittent compression can be observed on smaller scale. Across the orogen, extension thus has a strongly diachronous main component. We track common surface observables such as heat flow, partially melted rocks (domal migmatites), and predicted geo-/thermochronological ages over the evolving plate boundary. Geochemical projections of our observations confirm potential contamination of reservoirs - although the net delamination level follows the Moho, some crustal remnants along the old slab still sink through the 660-discontinuity. On the other hand, the base of the delaminated domain is not as plain a contact as in concept. Where the contact of asthenosphere with delaminated crust is the location of high-degree melting, also traces of original lithospheric mantle can be entangled. Our results do not fully support the conceptual distinction between convective thinning and blockwise delamination. While the foundering portion initially retains a fairly coherent, slab-like perimeter, the actual separation of layers in a limited process-zone occurs in smaller -scale eddies. Also, convection of the whole uprising asthenosphere wedge is dynamically not discernible from the latter and crucial for the removal of lithospheric mantle. The removed lithosphere does initially not convect, but subsequently shows an increasing tendency to drip down. In the presented case, extension in the axial zone of the orogen is not

  1. The effect of delaminations on local buckling in wind turbine blades

    DEFF Research Database (Denmark)

    Haselbach, Philipp Ulrich; Bitsche, Robert; Branner, Kim

    2015-01-01

    was setup in Abaqus and cohesive elements were chosen for modelling delamination growth. For initial delaminations with a width of 30–50% of the cap width the study showed that delamination close to the surface started to grow in load ranges of normal operation conditions and led to local buckling modes....... The local buckling caused high strains and stresses in the surrounding of the delamination, which exceeded the material design properties and therefore should be considered as dangerous. Delaminations placed near the mid-surface of the cap did not have a significant effect on the blade response under normal...... operation conditions. In the simulations the static load exceeded the design load by more than 40% before delamination growth or cap buckling occurred. It could be concluded that delamination induced near-surface buckling modes have to be considered critical due to an onset of local sublaminate buckling...

  2. Modeling turkey growth with the relative growth rate.

    Science.gov (United States)

    Maruyama, K; Potts, W J; Bacon, W L; Nestor, K E

    1998-01-01

    Six sigmoidal growth curves and two growth curves derived from a two-phase relative growth rate model were evaluated, using an experimental body-weight data from male and female turkeys of two genetic lines; a fast-growing (F) line and a randombred control (RBC) line from which the F line was developed. When their root mean square error was compared to the root mean square error of the local regression smoother, all sigmoidal growth curves: the logistic, Gompertz, von Bertalanffy, Richards, Weibull, and Morgan-Mercer-Flodin growth curves demonstrated a lack of fit. The primary source of the systematic lack of fit was identified with nonparametric estimates of the relative growth rate (the growth rate as a fraction of the body weight) of 20 turkeys. When the relative growth rate was estimated from the above sigmoidal growth curves, none could accommodate features of the nonparametric estimates of the relative growth rate. Based on the feature of the relative growth rate, two new growth curves were derived from a segmented two-phase model. Both models, in which the relative growth rate decreases in two linear phases with slopes of beta1 and beta2 joined together at time=kappa, gave growth curves that fit the experimental data acceptably. The linear-linear model with the smooth transition rendered better fit over the model with the abrupt transition. When the growth curves of male and female turkeys were compared, beta1, beta2, and kappa were smaller in males. When the F line was compared to the RBC line, beta1 and kappa were smaller and beta2 was closer to zero, indicating that the relative growth rate declined rapidly until about 61 days of age in the F line, while it declined less rapidly until about 71 days of age in the RBC line.

  3. Delamination detection using methods of computational intelligence

    Science.gov (United States)

    Ihesiulor, Obinna K.; Shankar, Krishna; Zhang, Zhifang; Ray, Tapabrata

    2012-11-01

    Abstract Reliable delamination prediction scheme is indispensable in order to prevent potential risks of catastrophic failures in composite structures. The existence of delaminations changes the vibration characteristics of composite laminates and hence such indicators can be used to quantify the health characteristics of laminates. An approach for online health monitoring of in-service composite laminates is presented in this paper that relies on methods based on computational intelligence. Typical changes in the observed vibration characteristics (i.e. change in natural frequencies) are considered as inputs to identify the existence, location and magnitude of delaminations. The performance of the proposed approach is demonstrated using numerical models of composite laminates. Since this identification problem essentially involves the solution of an optimization problem, the use of finite element (FE) methods as the underlying tool for analysis turns out to be computationally expensive. A surrogate assisted optimization approach is hence introduced to contain the computational time within affordable limits. An artificial neural network (ANN) model with Bayesian regularization is used as the underlying approximation scheme while an improved rate of convergence is achieved using a memetic algorithm. However, building of ANN surrogate models usually requires large training datasets. K-means clustering is effectively employed to reduce the size of datasets. ANN is also used via inverse modeling to determine the position, size and location of delaminations using changes in measured natural frequencies. The results clearly highlight the efficiency and the robustness of the approach.

  4. Effect of oxidation on delamination of ultrahigh-molecular-weight polyethylene tibial components.

    Science.gov (United States)

    Bell, C J; Walker, P S; Abeysundera, M R; Simmons, J M; King, P M; Blunn, G W

    1998-04-01

    Whether oxidation of ultrahigh-molecular-weight polyethylene (UHMWPE) causes delamination of the plastic in total knee arthroplasties (TKAs) was investigated. Examination of retrieved TKAs has shown that oxidation of UHMWPE can be caused by postirradiation damage leading to a subsurface band or, to a lesser extent, by mechanical forces during use leading to surface oxidation. Delamination cracks propagated through the subsurface oxidized band. In wear tests, delamination occurred in artificially aged UHMWPE where only subsurface oxidized bands had formed. Increased surface wear predominated where oxidation was associated with the surface of the plastic. Similarly, in tensile and fatigue tests of oxidized UHMWPE, there was a significant reduction in the ultimate tensile strength and in the fatigue resistance of specimens that had developed a subsurface band. Oxidation increased fatigue crack growth rate. It was observed that UHMWPE from different manufacturers varied in its resistance to oxidation. This study demonstrates that the effect of oxidation, which results in the development of a subsurface white band, combined with high subsurface shear forces observed in TKAs, is to enhance delamination wear.

  5. Measurements of Protein Crystal Face Growth Rates

    Science.gov (United States)

    Gorti, S.

    2014-01-01

    Protein crystal growth rates will be determined for several hyperthermophile proteins.; The growth rates will be assessed using available theoretical models, including kinetic roughening.; If/when kinetic roughening supersaturations are established, determinations of protein crystal quality over a range of supersaturations will also be assessed.; The results of our ground based effort may well address the existence of a correlation between fundamental growth mechanisms and protein crystal quality.

  6. Role of Rate of Specific Growth Rate in Different Growth Processes: A First Principle Approach

    CERN Document Server

    Biswas, Dibyendu; Patra, Sankar Nayaran

    2015-01-01

    In the present communication, effort is given for the development of a common platform that helps to address several growth processes found in literature. Based on first principle approach, the role of rate of specific growth rate in different growth processes has been considered in an unified manner. It is found that different growth equations can be derived from the same rate equation of specific growth rate. The dependence of growth features of different growth processes on the parameters of the rate equation of specific growth rate has been examined in detail. It is found that competitive environment may increase the saturation level of population size. The exponential growth could also be addressed in terms of two important factors of growth dynamics, as reproduction and competition. These features are, most probably, not reported earlier.

  7. Buckling-driven delamination in layered spherical shells

    Science.gov (United States)

    Sørensen, Kim D.; Jensen, Henrik M.

    An analysis of buckling-driven delamination of a layer in a spherical, layered shell has been carried out. The effects of the substrate having a double curvature compared to previous studies of delamination on cylindrical substrates turn out to be non-trivial in the sense that additional to the effect of the shape of the substrate, a new non-dimensional geometrical parameter enters the conditions for steady-state delamination. It is shown that this additional geometrical parameter in most cases of practical relevance has insignificant influence on the fracture mechanical parameters involved for the problem. The consequence is that solutions need to be mapped as a function of one rather than two dimensionless parameters. Furthermore, the shape of the substrate has profound influence especially on initiation of delamination growth.

  8. Investigating Delamination Migration in Composite Tape Laminates

    Science.gov (United States)

    Ratcliffe, James G.; DeCarvalho, Nelson V.

    2014-01-01

    A modification to a recently developed test specimen designed to investigate migration of a delamination between neighboring ply interfaces in tape laminates is presented. The specimen is a cross-ply laminated beam consisting of 40 plies with a polytetrafluoroethylene insert spanning part way along its length. The insert is located between a lower 0-degree ply (specimen length direction) and a stack of four 90-degree plies (specimen width direction). The modification involved a stacking sequence that promotes stable delamination growth prior to migration, and included a relocation of the insert from the specimen midplane to the interface between plies 14 and 15. Specimens were clamped at both ends onto a rigid baseplate and loaded on their upper surface via a piano hinge assembly, resulting in a predominantly flexural loading condition. Tests were conducted with the load-application point positioned at various locations along a specimen's span. This position affected the sequence of damage events during a test.

  9. Volumetric Growth Rate of Recurrent Pleomorphic Adenoma.

    Science.gov (United States)

    Naunheim, Molly; Wu, Xin; Ryan, William R; Wang, Steven J; Heaton, Chase M

    2017-07-01

    Surgery for recurrent pleomorphic adenoma (PA) can be challenging and may increase the risk of operative complications, particularly facial nerve weakness. As observation may be a viable alternative to surgery for slow-growing tumors, our objective was to assess the growth rate of recurrent PAs. This study is a case series of patients at our tertiary academic medical center with recurrent PA. Two magnetic resonance images (MRI) were compared; total volume (TV) of recurrent tumor on both studies was calculated to obtain our main outcomes of percent change in TV and tumor growth rate. Fourteen patients with recurrent PA had a median interval time between MRI of 12.8 months. Though growth rates were variable, the median continuous compound growth per year was 10.2%. Notably, 3 patients (21%) had no growth, and 2 patients (14%) had a reduction in TV. The median growth rate for enlarging tumors is estimated at 10.2% per year. Due to variability, tumor growth rate should be estimated on an individual patient basis. For slow-growing tumors, physicians may weigh the risk of this slow growth with the morbidity of reoperation.

  10. Impact Analysis of Embedded Delamination Location in Hybrid Curved Laminated Composite Stiffened Panel

    Science.gov (United States)

    Naini, Jeevan Kumar; P, Ramesh Babu

    2016-08-01

    Modern, aero structures are predominantly of curved construction characterized by a skin and stiffeners. The latest generation of large passenger aircraft also uses mostly composite material in their primary structure and there is trend towards the utilization of bonding of subcomponents. The presence of delamination is a major problem in composite laminated panels and so, it is of great concern to both the academic and aeronautical industrial worlds Indeed delamination can strongly affect the material strength and, sometimes, can cause their breaking up in service. A Pre-damaged configuration is loaded to study the delamination location and mode for delamination initiation and propagation. A parametric study is conducted to investigate the effect of the location of the delamination propagation when delamination is embedded inbetween plies of the skin-stiffener interface, with the cases i) delamination located at front and inbetween plies of the skin-stiffener interface ii) delamination located in middle and inbetween plies of the skin-stiffener interface iii) delamination located at the end and inbetween plies of the skin- stiffener interface. Further the influence of the location of the delamination on load carrying capacity of the panel is investigated. The effect of location of debonds on crack growth and collapse behavior is analyzed using analysis tool. An analysis tool is applied that includes an approach for predicting interlaminar damage initiation and interlaminar damage growth as well as in-plane damage mechanisms to predict the design of defect free panel.

  11. Dinosaurian growth patterns and rapid avian growth rates.

    Science.gov (United States)

    Erickson, G M; Rogers, K C; Yerby, S A

    2001-07-26

    Did dinosaurs grow in a manner similar to extant reptiles, mammals or birds, or were they unique? Are rapid avian growth rates an innovation unique to birds, or were they inherited from dinosaurian precursors? We quantified growth rates for a group of dinosaurs spanning the phylogenetic and size diversity for the clade and used regression analysis to characterize the results. Here we show that dinosaurs exhibited sigmoidal growth curves similar to those of other vertebrates, but had unique growth rates with respect to body mass. All dinosaurs grew at accelerated rates relative to the primitive condition seen in extant reptiles. Small dinosaurs grew at moderately rapid rates, similar to those of marsupials, but large species attained rates comparable to those of eutherian mammals and precocial birds. Growth in giant sauropods was similar to that of whales of comparable size. Non-avian dinosaurs did not attain rates like those of altricial birds. Avian growth rates were attained in a stepwise fashion after birds diverged from theropod ancestors in the Jurassic period.

  12. On growth rate hysteresis and catastrophic crystal growth

    Science.gov (United States)

    Ferreira, Cecília; Rocha, Fernando A.; Damas, Ana M.; Martins, Pedro M.

    2013-04-01

    Different crystal growth rates as supersaturation is increasing or decreasing in impure media is a phenomenon called growth rate hysteresis (GRH) that has been observed in varied systems and applications, such as protein crystallization or during biomineralization. We have recently shown that the transient adsorption of impurities onto newly formed active sites for growth (or kinks) is sensitive to the direction and rate of supersaturation variation, thus providing a possible explanation for GRH [6]. In the present contribution, we expand on this concept by deriving the analytical expressions for transient crystal growth based on the energetics of growth hillock formation and kink occupation by impurities. Two types of GRH results are described according to the variation of kink density with supersaturation: for nearly constant density, decreasing or increasing supersaturation induce, respectively, growth promoting or inhibiting effects relative to equilibrium conditions. This is the type of GRH measured by us during the crystallization of egg-white lysozyme. For variable kink density, slight changes in the supersaturation level may induce abrupt variations in the crystal growth rate. Different literature examples of this so-called 'catastrophic' crystal growth are discussed in terms of their fundamental consequences.

  13. Accelerating Growth Rates in Shellfish with Bovine Growth Hormone

    OpenAIRE

    Chang, Ernest

    2002-01-01

    Marine biologist Dr.Ernest Chang of the Bodega Marine Laboratory and colleagues at the University of Hawaii investigated the possibility of using bovine growth hormone to increase growth rates of American lobster (Homarus americanus) and two species of shrimp—a cold-water California rock shrimp (Sicyonia ingentis) and the warm-water Penaeus vannamei.

  14. Edge effects and delamination failures

    Science.gov (United States)

    Herakovich, C. T.

    1989-01-01

    The fundamental relationship between the morphology of a composite laminate and the resulting free edge effects is explored and related to delamination failures. Cross-ply, angle-ply, and quasi-isotropic laminates are discussed in detail. It is shown that the local mismatch in elastic properties of adjacent layers and the global stacking sequence of a laminate both have a significant influence on the interlaminar stresses and delamination failures.

  15. Does slower growth imply lower interest rates?

    OpenAIRE

    2014-01-01

    Over the past two years, both monetary and fiscal policy projections have been based on the view that declines in the long-run potential growth rate of the economy will in turn push down interest rates. In contrast, examination of private-sector professional forecasts and historical data provides little evidence of such a linkage. This suggests a greater risk that future interest rates may be higher than expected.

  16. A subregional model for delamination prediction of rubber composite under fatigue loading

    Institute of Scientific and Technical Information of China (English)

    TIAN Zhen-hui; TAN Hui-feng

    2005-01-01

    Results from fatigue experiments of cross-laminated steel cord-rubber composites (SCRC) indicate that fatigue damage life can be categorized into three regimes. In terms of fatigue modes, a subregional fatigue model is developed to describe the damages evolution of SCRC under fatigue loads. Firstly, finite element analysis is introduced to determine interply stress distribution of the specimen. Then, based on the experimental fatigue data, subregional models are introduced to simulate relations between maximum strain, effective stiffness,delamination shear stress and fatigue cycles. Relations between crack density, delamination length growth rate,macro crack density and cycles are modeled by two semi-empirical models. A reasonable prediction result was achieved by the current model, where model parameters can be determined by basic outputs of fatigue testing.

  17. STUDY ON FAILURE PROCESS OF DELAMINATED STIFFENED COMPOSITE PLATES UNDER COMPRESSION

    Institute of Scientific and Technical Information of China (English)

    陈浩然; 白瑞祥; 王蔓

    2003-01-01

    Failure behavior of the delaminated stiffened composite plates under compression is studied by the finite element method, based on a Global-Local variational model. A virtual crack closure technique and a self-adaptive grid moving scheme are proposed to predict the delamination growth process. The contact effect along the delamination front is considered. The numerical results show that the influences of the distribution and location of the stiffeners, the configuration and size of the delamination, the boundary condition and the contact upon the failure behavior of the plates are significant.

  18. EVIDENCE ON EMPLOYMENT RATE AND ECONOMIC GROWTH

    Directory of Open Access Journals (Sweden)

    Cornelia VĂCEANU

    2014-11-01

    Full Text Available This paper explores a causal relationship between employment rate and economic growth for European Union countries, in general, and produces a structural assessment of employment on the background of labour market dynamics. Economic growth is the key in economic theory and the main source of well-being and quality of life. Since the 2008 financial crisis, most European countries have experienced job shortage and unemployment problem, but today's European economic outlook is strengthening on the bases of a GDP growing momentum. Empirical data shows, regardless the GDP's moderate positive trend, the employment rate did not increase enough. Given this, the present analysis address the question: to what extent the employment rate is affected by economic growth?

  19. Characterizing Delamination Migration in Carbon/Epoxy Tape Laminates

    Science.gov (United States)

    Ratcliffe, James G.; Czabaj, Michael W.; Obrien, Thomas K.

    2012-01-01

    A new test method is presented for the purpose of investigating migration of a delamination between neighboring ply interfaces in fiber-reinforced, polymer matrix tape laminates. The test is a single cantilever beam configuration consisting of a cross-ply laminate with a polytetrafluoroethylene (PTFE) insert implanted at the mid-plane and spanning part way along the length of the specimen. The insert is located between a 0-degree ply (specimen length direction) and a stack of four 90-degree plies (specimen width direction). The specimen is clamped at both ends onto a rigid baseplate and is loaded on its upper surface via a piano hinge. Tests were conducted with the load-application point located on the intact portion of the specimen in order to initiate delamination growth onset followed by migration of the delamination to a neighboring 90/0 ply interface by kinking through the 90- degree ply stack. Varying this position was found to affect the distance relative to the load-application point at which migration initiated. In each specimen, migration initiated by a gradual transition of the delamination at the 0/90 interface into the 90- degree ply stack. In contrast, transition of the kinked crack into the 90/0 interface was sudden. Fractography of the specimens indicated that delamination prior to migration was generally mixed mode-I/II. Inspection of the kink surface revealed mode-I fracture. In general, use of this test allows for the observation of the growth of a delamination followed by migration of the delamination to another ply interface, and should thus provide a means for validating analyses aimed at simulating migration.

  20. Assessment of Static Delamination Propagation Capabilities in Commercial Finite Element Codes Using Benchmark Analysis

    Science.gov (United States)

    Orifici, Adrian C.; Krueger, Ronald

    2010-01-01

    With capabilities for simulating delamination growth in composite materials becoming available, the need for benchmarking and assessing these capabilities is critical. In this study, benchmark analyses were performed to assess the delamination propagation simulation capabilities of the VCCT implementations in Marc TM and MD NastranTM. Benchmark delamination growth results for Double Cantilever Beam, Single Leg Bending and End Notched Flexure specimens were generated using a numerical approach. This numerical approach was developed previously, and involves comparing results from a series of analyses at different delamination lengths to a single analysis with automatic crack propagation. Specimens were analyzed with three-dimensional and two-dimensional models, and compared with previous analyses using Abaqus . The results demonstrated that the VCCT implementation in Marc TM and MD Nastran(TradeMark) was capable of accurately replicating the benchmark delamination growth results and that the use of the numerical benchmarks offers advantages over benchmarking using experimental and analytical results.

  1. Enteric bacterial growth rates in river water.

    Science.gov (United States)

    Hendricks, C W

    1972-08-01

    Enteric bacteria, including stocked strains of pathogenic species and organisms naturally present in the stream, were capable of growth in a chemostat with autoclaved river water taken 750 m below a sewage outfall. Maximal specific growth rates for all organisms occurred at 30 C, whereas culture generation times ranged between 33.3 and 116 hr. Of the six laboratory strains of enteric species used, Escherichia coli and Enterobacter aerogenes grew at generation times of 34.5 and 33.3 hr, respectively, while the remaining Proteus, Arizona, Salmonella, and Shigella spp. reproduced at a rate two to three times slower than the coliforms. Little or no growth occurred in the water at incubation temperatures of 20 and 5 C, and death was observed for Salmonella senftenberg at 20 and 5 C and for E. aerogenes and Proteus rettgeri at 5 C. When enteric bacteria naturally present in the river water were employed in similar experiments, coliform bacteria demonstrated a generation time of approximately 116 hr, whereas fecal coliforms failed to grow. Growth of the bacteria from the river demonstrated a periodicity of approximately 100 hr, which suggests that much of the growth of these organisms in the chemostat may be on the glass surfaces. This phenomenon, however, was not observed with any of the stocked enteric species. Neither the stock cultures nor the aquatic strains were capable of growth in autoclaved river water taken above the sewage outfall at the three temperatures tested.

  2. Bounds on bacterial cell growth rates

    CERN Document Server

    Landy, Jonathan

    2013-01-01

    Recent experiments have shown that rod-like bacteria in nutrient-rich media grow in length at an exponential rate. Here, I point out that it is the elongated shape of these bacteria that allows for this behavior. Further, I show that when a bacterium's growth is limited by some nutrient -- taken in by the cell through a diffusion-to-capture process -- its growth is suppressed: In three-dimensional geometries, the length $L$ is bounded by $\\log L \\lesssim t^{1/2}$, while in two dimensions the length is bounded by a power-law form. Fits of experimental growth curves to these predicted, sub-exponential forms could allow for direct measures of quantities relating to cellular metabolic rates.

  3. The Variance Composition of Firm Growth Rates

    Directory of Open Access Journals (Sweden)

    Luiz Artur Ledur Brito

    2009-04-01

    Full Text Available Firms exhibit a wide variability in growth rates. This can be seen as another manifestation of the fact that firms are different from one another in several respects. This study investigated this variability using the variance components technique previously used to decompose the variance of financial performance. The main source of variation in growth rates, responsible for more than 40% of total variance, corresponds to individual, idiosyncratic firm aspects and not to industry, country, or macroeconomic conditions prevailing in specific years. Firm growth, similar to financial performance, is mostly unique to specific firms and not an industry or country related phenomenon. This finding also justifies using growth as an alternative outcome of superior firm resources and as a complementary dimension of competitive advantage. This also links this research with the resource-based view of strategy. Country was the second source of variation with around 10% of total variance. The analysis was done using the Compustat Global database with 80,320 observations, comprising 13,221 companies in 47 countries, covering the years of 1994 to 2002. It also compared the variance structure of growth to the variance structure of financial performance in the same sample.

  4. Simulation of cusp formation in mode II delamination

    NARCIS (Netherlands)

    Sluys, L.J.; Van der Meer, F.P.

    2014-01-01

    On the microlevel, cusps are formed during delamination crack growth under mode II loading conditions. In this work, two different approaches to simulate this process are presented. Firstly a cohesive zone method where cohesive segments are introduced between a pair of neighbouring elements when the

  5. Maximization of Growth Rates During Czochralski Pulling

    Science.gov (United States)

    Wargo, M. J.

    1984-01-01

    It was suggested from theory(1-4) that silicon can be grown from the melt at rates far exceeding the current state of the art. Previous theoretical and experimental investigations which predict maximum rates of pulling during Czochralski growth are reviewed. Several experimental methods are proposed to modify the temperature distribution in a growing crystal to achieve higher rates of pulling. A physical model of a Czochralski crystal of germanium in contact with its melt was used to quantitatively determine, by direct measurement of the axial temperature distribution in the solid, the increase in axial temperature gradients effected by an inverted conical heat reflector located above the melt and coaxially about the physical model. Preliminary results indicate that this is an effective method of increasing the thermal resistance between the hot melt and crucible wall and a growing crystal. Under these conditions the enhancement of the interfacial temperature gradients permit a commensurate increase in the rate of crystal pulling.

  6. China's fertility drop lowers world growth rate.

    Science.gov (United States)

    Haub, C

    1993-06-01

    China practices a stringent and compulsory program of family planning and population control. This approach has, however, served to increase the number of domestic IUD insertions and sterilizations. Contraceptive prevalence has reached 83% and total fertility (TFR) is estimated to be 1.9. This Chinese accomplishment has helped reduce TFR for all East Asia to 1.8, which is lower than that for northern Europe, and bring the world population growth rate down from the 1992 level of 1.68% to 1.63%. This latter rate is reported in the 1993 Population Reference Bureau's (PRB) World Population Data Sheet and is the lowest world population growth rate since PRB's first annual edition in 1962. Despite these reductions, world population still grows by 90 million annually. No one can say for sure whether or not observed fertility decline in China is permanent. China's birth rate rose twice in the 1980s and it could certainly rebound once again. A popular backlash to population policy or a relaxing of policy due to international pressure to reduce the level of compulsion in the program are 2 factors which might increase overall fertility and population growth. Fertility is also declining in subSaharan Africa, but not universally. Birth rates are rapidly declining in eastern Europe and the former USSR as economic conditions and outlooks pale. The populations of Estonia, Latvia, Ukraine, and possible Russia are even declining, while only mixed data are available from Yugoslavia. New statistical publications reflect changing borders. Finally, while Slovakia is the only country added to this year's sheet, Eritrea and the Channel Islands will likely be included in next year's.

  7. Microscopic mechanisms of graphene electrolytic delamination from metal substrates

    Science.gov (United States)

    Fisichella, G.; Di Franco, S.; Roccaforte, F.; Ravesi, S.; Giannazzo, F.

    2014-06-01

    In this paper, hydrogen bubbling delamination of graphene (Gr) from copper using a strong electrolyte (KOH) water solution was performed, focusing on the effect of the KOH concentration (CKOH) on the Gr delamination rate. A factor of ˜10 decrease in the time required for the complete Gr delamination from Cu cathodes with the same geometry was found increasing CKOH from ˜0.05 M to ˜0.60 M. After transfer of the separated Gr membranes to SiO2 substrates by a highly reproducible thermo-compression printing method, an accurate atomic force microscopy investigation of the changes in Gr morphology as a function of CKOH was performed. Supported by these analyses, a microscopic model of the delamination process has been proposed, where a key role is played by graphene wrinkles acting as nucleation sites for H2 bubbles at the cathode perimeter. With this approach, the H2 supersaturation generated at the electrode for different electrolyte concentrations was estimated and the inverse dependence of td on CKOH was quantitatively explained. Although developed in the case of Cu, this analysis is generally valid and can be applied to describe the electrolytic delamination of graphene from several metal substrates.

  8. In situ investigation of growth rates and growth rate dispersion of α-lactose monohydrate crystals

    Science.gov (United States)

    Dincer, T. D.; Ogden, M. I.; Parkinson, G. M.

    2009-02-01

    The growth rates and growth rate dispersion (GRD) of four different faces of α-lactose monohydrate crystal were measured at 30, 40 and 50 °C in the relative supersaturation range 0.55-2.33 in aqueous solutions. The overall growth rate of the crystal is around 50-60% of the (0 1 0) face of the crystal. The power law was applied to the growth rates of the four faces and the activation energies were calculated to be between 9.5 and 13.7 kcal/mol. This indicates a diffusion-controlled growth, but the exponents calculated are between 2.5 and 3.1 which are higher than unity. Introduction of critical supersaturation decreased the exponents to between 1.8 and 2.4. The variance of GRD for the (0 1 0) face is twice the variance of the GRD of the (1 1 0) and (1 0 0) faces and 10 times higher than the (1 1¯ 1¯) face at the same supersaturations and temperatures. The GRD of the four faces were similar when expressed as a function of growth rate. However, the (0 1 1) face displayed lower GRD than the other faces at the same temperatures and supersaturations.

  9. Species Diversity Enhances Predator Growth Rates

    Directory of Open Access Journals (Sweden)

    Mark H. Olson

    2007-01-01

    Full Text Available Predators can be important top-down regulators of community structure and are known to have both positive and negative effects on species diversity. However, little is known about the reciprocal effects of species diversity on predators. Across a set of 80 lakes in Connecticut, USA, we found a strong positive correlation between prey species diversity (using the Shannon-Weiner Diversity Index and growth rates of largemouth bass (Micropterus salmoides. This correlation was strongest for small predators and decreased with body size. Although the underlying mechanisms are not known, the correlation is not driven by total fish abundance, predator abundance, or productivity.

  10. The Delamination Theory of Wear

    Science.gov (United States)

    1974-09-01

    junctions, it is still based on the assumption that the deformation occurs at the asperities. Rabinowicz [14] advanced an adhesion theory of friction...shown that bronze particles were indeed bigger than steel particles. The compilation of wear particle sizes given by Rabinowicz [14] also indicates...Waterhouse [32] has shown that, in fact, fretting occurs by delamination. 6) Minimum Load for Loose Particle Formation Rabinowicz [14] found that no wear

  11. Growth rates of stratospheric HCFC-22

    Directory of Open Access Journals (Sweden)

    D. P. Moore

    2007-07-01

    Full Text Available The Michelson Interferometer for Passive Atmospheric Sounding onboard ENVISAT (MIPAS-E offers the opportunity to detect and spectrally resolve many atmospheric minor constituents affecting atmospheric chemistry. In this paper, we describe an algorithm produced to retrieve HCFC–22 profiles from MIPAS-E measurements made in 2003 and present results from this scheme between 300 and 50 mb. By comparison with ATMOS (AT–3 version 3 data, we find a mean Northern Hemisphere mid-latitude (20–50° N HCFC–22 growth rate between 1994 and 2003 of 5.4±0.7 pptv/yr in the lower stratosphere (LS and a mean LS Southern Hemisphere growth rate (60–80°S of 6.0±0.7 pptv/yr in the same period. We test the feasibility of using a global data set to estimate the chemical lifetime of HCFC–22 in the LS and we derive this for two regions; 20–50° N (259±38 years and 60–80° S (288±34 years. From these data we note a global LS lifetime of 274±25 years, significantly longer than previous estimates.

  12. Delaminated rotator cuff tear: extension of delamination and cuff integrity after arthroscopic rotator cuff repair.

    Science.gov (United States)

    Gwak, Heui-Chul; Kim, Chang-Wan; Kim, Jung-Han; Choo, Hye-Jeung; Sagong, Seung-Yeob; Shin, John

    2015-05-01

    The purpose of this study was to evaluate the extension of delamination and the cuff integrity after arthroscopic repair of delaminated rotator cuff tears. Sixty-five patients with delaminated rotator cuff tears were retrospectively reviewed. The delaminated tears were divided into full-thickness delaminated tears and partial-thickness delaminated tears. To evaluate the medial extension, we calculated the coronal size of the delaminated portion. To evaluate the posterior extension, we checked the tendon involved. Cuff integrity was evaluated by computed tomography arthrography. The mean medial extension in the full-thickness and partial-thickness delaminated tears was 18.1 ± 6.0 mm and 22.7 ± 6.3 mm, respectively (P = .0084). The posterior extension into the supraspinatus and the infraspinatus was 36.9% and 32.3%, respectively, in the full-thickness delaminated tears, and it was 27.7% and 3.1%, respectively, in the partial-thickness delaminated tears (P = .0043). With regard to cuff integrity, 35 cases of anatomic healing, 10 cases of partial healing defects, and 17 cases of retear were detected. Among the patients with retear and partial healing of the defect, all the partially healed defects showed delamination. Three retear patients showed delamination, and 14 retear patients did not show delamination; the difference was statistically significant (P = .0001). The full-thickness delaminated tears showed less medial extension and more posterior extension than the partial-thickness delaminated tears. Delamination did not develop in retear patients, but delamination was common in the patients with partially healed defects. Copyright © 2015 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

  13. Regional adaptive delaminating algorithm for rapid prototyping

    Institute of Scientific and Technical Information of China (English)

    CAI Daosheng; SHI Yusheng; HUANG Shuhuai

    2005-01-01

    With the development of rapid prototyping (RP) technology, the contradiction between fabricating speed and precision becomes more and more acute. In order to solve the contradiction, a regional effective adaptive delaminating algorithm is proposed in this paper. It is different from the traditional method that the regional adaptive delaminating method divides slicing contours into several regions and adaptively delaminates in respective region only according to the contours information. Namely, this method can not only adaptively delaminate at different height of CAD model but also adaptively delaminate different regions in one slicing layer. Furthermore, because the two-dimensional contour data adopted in this method are necessary for rapid prototyping system, this regional effective adaptive delaminating method is suitable for all RP systems. A comparative study is used to analyze the effectiveness of this method, which can demonstrate that this method can increase the fabricating speed and reduce the running cost under the condition of ensuring fabricating precision.

  14. Mixed-Mode Decohesion Finite Elements for the Simulation of Delamination in Composite Materials

    Science.gov (United States)

    Camanho, Pedro P.; Davila, Carlos G.

    2002-01-01

    A new decohesion element with mixed-mode capability is proposed and demonstrated. The element is used at the interface between solid finite elements to model the initiation and non-self-similar growth of delaminations. A single relative displacement-based damage parameter is applied in a softening law to track the damage state of the interface and to prevent the restoration of the cohesive state during unloading. The softening law for mixed-mode delamination propagation can be applied to any mode interaction criterion such as the two-parameter power law or the three-parameter Benzeggagh-Kenane criterion. To demonstrate the accuracy of the predictions and the irreversibility capability of the constitutive law, steady-state delamination growth is simulated for quasistatic loading-unloading cycles of various single mode and mixed-mode delamination test specimens.

  15. GROWTH RATE DISTRIBUTION OF BORAX SINGLE CRYSTALS ON THE (001 FACE UNDER VARIOUS FLOW RATES

    Directory of Open Access Journals (Sweden)

    Suharso Suharso

    2010-06-01

    Full Text Available The growth rates of borax single crystals from aqueous solutions at various flow rates in the (001 direction were measured using in situ cell method. From the growth rate data obtained, the growth rate distribution of borax crystals was investigated using Minitab Software and SPSS Software at relative supersaturation of 0807 and temperature of 25 °C. The result shows that normal, gamma, and log-normal distribution give a reasonably good fit to GRD. However, there is no correlation between growth rate distribution and flow rate of solution.   Keywords: growth rate dispersion (GRD, borax, flow rate

  16. Optimizing the delamination failure in bamboo fiber reinforced polyester composite

    Directory of Open Access Journals (Sweden)

    N. Abilash

    2016-01-01

    Full Text Available Delamination is represented to be the most prevalent failure in composite structures. The use of composites in the manufacturing sector plays a very important role in the industry in general. Moreover these materials have unique characteristics when analyzed separately from constituents which are a part of them. In this paper, a partially ecological composite was made, using natural fibers as reinforcement (bamboo fiber, in the polyester resin matrix to form a composite, seeking to improve the mechanical behavior among its class of materials. The characteristics of a composite material are determined by how it behaves while machining, Drilling is the most predominant machining process because of its cost effectiveness when compared with other processes. Obviously delamination is the major problem that is focused by many researchers while selecting drilling as the machining process in polymeric composites. This research mainly emphasizes on the critical parameters by varying its speed, feed, and diameter of the cutting tool, their contribution to delamination was analyzed. Reduced delaminations were identified by varying the speed and feed rate.

  17. Delamination of Compressed Thin Layers at Corners

    DEFF Research Database (Denmark)

    Sørensen, Kim D.; Jensen, Henrik Myhre; Clausen, Johan

    2008-01-01

    An analysis of delamination for a thin elastic layer under compression, attached to a substrate at a corner is carried out. The analysis is performed by combining results from interface fracture mechanics and the theory of thin shells. In contrast with earlier results for delamination on a flat...... layers, Fracture mechanics, Crack closure, Steady state crack propagation....

  18. Delamination of Compressed Thin Layers at Corners

    DEFF Research Database (Denmark)

    Sørensen, Kim Dalsten; Jensen, Henrik Myhre; Clausen, Johan

    2008-01-01

    An analysis of delamination for a thin elastic layer under compression, attached to a substrate at a corner is carried out. The analysis is performed by combining results from interface fracture mechanics and the theory of thin shells. In contrast with earlier results for delamination on a flat...

  19. Delamination Detection Using Guided Wave Phased Arrays

    Science.gov (United States)

    Tian, Zhenhua; Yu, Lingyu; Leckey, Cara

    2016-01-01

    This paper presents a method for detecting multiple delaminations in composite laminates using non-contact phased arrays. The phased arrays are implemented with a non-contact scanning laser Doppler vibrometer (SLDV). The array imaging algorithm is performed in the frequency domain where both the guided wave dispersion effect and direction dependent wave properties are considered. By using the non-contact SLDV array with a frequency domain imaging algorithm, an intensity image of the composite plate can be generated for delamination detection. For the proof of concept, a laboratory test is performed using a non-contact phased array to detect two delaminations (created through quasi-static impact test) at different locations in a composite plate. Using the non-contact phased array and frequency domain imaging, the two impact-induced delaminations are successfully detected. This study shows that the non-contact phased array method is a potentially effective method for rapid delamination inspection in large composite structures.

  20. Assembly induced delaminations in composite structures

    Science.gov (United States)

    Goering, J.; Bohlmann, R.; Wanthal, S.; Kautz, E.; Neri, Lawrence M.

    1992-01-01

    Experimental and analytical studies of the development of delaminations around fastener holes in composite structures are presented. This type of delamination is known to occur in composite skins that are mechanically fastened to a poorly mating substructure. Results of an experimental study to determine the resistance of laminates to the initiation of assembly induced delaminations and the residual strength of assembly damaged coupons are presented for AS4/3501-6, IM7/8551-7A, and AS4/PEEK material systems. A survey of existing analytical models for predicting the residual strength and stability of delaminations is presented, and the development of a new model for predicting the initiation of delaminations around a fastener hole is outlined. The fastener hole damage initiation model utilizes a finite element based Fourier series solution, and is validated through comparisons of analytical and experimental results.

  1. EBSP studies of growth rates during recrystallization

    DEFF Research Database (Denmark)

    Juul Jensen, D.

    1996-01-01

    . The potential of the EBSP technique for both these types of measurements is illustrated for recrystallization of heavily deformed aluminium. It is discussed how these approaches apply to grain growth. Finally, new possibilities for in-situ grain growth studies by 3D mapping of orientations in the bulk...

  2. Sweat secretion rates in growth hormone disorders

    DEFF Research Database (Denmark)

    Sneppen, S B; Main, K M; Juul, A

    2000-01-01

    While increased sweating is a prominent symptom in patients with active acromegaly, reduced sweating is gaining status as part of the growth hormone deficiency (GHD) syndrome.......While increased sweating is a prominent symptom in patients with active acromegaly, reduced sweating is gaining status as part of the growth hormone deficiency (GHD) syndrome....

  3. Sweat secretion rates in growth hormone disorders

    DEFF Research Database (Denmark)

    Sneppen, S B; Main, K M; Juul, A

    2000-01-01

    While increased sweating is a prominent symptom in patients with active acromegaly, reduced sweating is gaining status as part of the growth hormone deficiency (GHD) syndrome.......While increased sweating is a prominent symptom in patients with active acromegaly, reduced sweating is gaining status as part of the growth hormone deficiency (GHD) syndrome....

  4. Calcite crystal growth rate inhibition by polycarboxylic acids

    Science.gov (United States)

    Reddy, M.M.; Hoch, A.R.

    2001-01-01

    Calcite crystal growth rates measured in the presence of several polycarboxyclic acids show that tetrahydrofurantetracarboxylic acid (THFTCA) and cyclopentanetetracarboxylic acid (CPTCA) are effective growth rate inhibitors at low solution concentrations (0.01 to 1 mg/L). In contrast, linear polycarbocylic acids (citric acid and tricarballylic acid) had no inhibiting effect on calcite growth rates at concentrations up to 10 mg/L. Calcite crystal growth rate inhibition by cyclic polycarboxyclic acids appears to involve blockage of crystal growth sites on the mineral surface by several carboxylate groups. Growth morphology varied for growth in the absence and in the presence of both THFTCA and CPTCA. More effective growth rate reduction by CPTCA relative to THFTCA suggests that inhibitor carboxylate stereochemical orientation controls calcite surface interaction with carboxylate inhibitors. ?? 20O1 Academic Press.

  5. (LAMINARIA PALLIDA) ON THE RE-GROWTH RATE AND ...

    African Journals Online (AJOL)

    user

    2010-05-05

    May 5, 2010 ... important factor affecting growth under laboratory conditions [9]. ... effects on light penetration, will affect the relative re-growth rate of sub-canopy kelp ..... photosynthesis and pigments in Laminaria ochroleuca (Laminariales,.

  6. Guidelines and Parameter Selection for the Simulation of Progressive Delamination

    Science.gov (United States)

    Song, Kyongchan; Davila, Carlos G.; Rose, Cheryl A.

    2008-01-01

    Turon s methodology for determining optimal analysis parameters for the simulation of progressive delamination is reviewed. Recommended procedures for determining analysis parameters for efficient delamination growth predictions using the Abaqus/Standard cohesive element and relatively coarse meshes are provided for single and mixed-mode loading. The Abaqus cohesive element, COH3D8, and a user-defined cohesive element are used to develop finite element models of the double cantilever beam specimen, the end-notched flexure specimen, and the mixed-mode bending specimen to simulate progressive delamination growth in Mode I, Mode II, and mixed-mode fracture, respectively. The predicted responses are compared with their analytical solutions. The results show that for single-mode fracture, the predicted responses obtained with the Abaqus cohesive element correlate well with the analytical solutions. For mixed-mode fracture, it was found that the response predicted using COH3D8 elements depends on the damage evolution criterion that is used. The energy-based criterion overpredicts the peak loads and load-deflection response. The results predicted using a tabulated form of the BK criterion correlate well with the analytical solution and with the results predicted with the user-written element.

  7. Economic growth rate management by soft computing approach

    Science.gov (United States)

    Maksimović, Goran; Jović, Srđan; Jovanović, Radomir

    2017-01-01

    Economic growth rate management is very important process in order to improve the economic stability of any country. The main goal of the study was to manage the impact of agriculture, manufacturing, industry and services on the economic growth rate prediction. Soft computing methodology was used in order to select the inputs influence on the economic growth rate prediction. It is known that the economic growth may be developed on the basis of combination of different factors. Gross domestic product (GDP) was used as economic growth indicator. It was found services have the highest impact on the GDP growth rate. On the contrary, the manufacturing has the smallest impact on the GDP growth rate.

  8. Re-assessing copepod growth using the Moult Rate method

    DEFF Research Database (Denmark)

    Hirst, Andrew G.; Keister, J. E.; Richardson, A. J.

    2014-01-01

    Estimating growth and production rates of mesozooplankton, and copepods in particular, is important in describing flows of material and energy though pelagic systems. Over the past 30 years, the Moult Rate (MR) method has been used to estimate juvenile copepod growth rates in ∼40 papers. Yet the ...

  9. Dependence of Limited Growth Rate of High-Quality Gem Diamond on Growth Conditions

    Institute of Scientific and Technical Information of China (English)

    TIAN Yu; MA Hong-An; LI Shang-Sheng; XIAO Hong-Yu; ZHANG Ya-Fei; HUANG Guo-Feng; MA Li-Qiu; JIA Xiao-Peng

    2007-01-01

    The growth rate of diamond has been investigated for a long time and researchers have been attempting to enhance the growth rate of high-quality gem diamond infinitely. However, it has been found according to previous research results that the quality of diamond is debased with the increase of growth rate. Thus, under specific conditions, the growth rate of high-quality diamond cannot exceed a limited value that is called the limited growth rate of diamond. We synthesize a series of type Ib gem diamonds by temperature gradient method under high pressure and high temperature (HPHT) using the as-grown {100} face. The dependence of limited growth rate on growth conditions is studied. The results show that the limited growth rate increases when synthetic temperature decreases, also when growth time is prolonged.

  10. Observational tests of Galileon gravity with growth rate

    Science.gov (United States)

    Hirano, Koichi

    2016-10-01

    We compare observational data of growth rate with the prediction by Galileon theory. For the same value of the energy density parameter Ω_{m,0}, the growth rate in Galileon models is enhanced compared with the Λ CDM case, due to the enhancement of Newton's constant. The smaller Ω_{m,0} is, the more suppressed growth rate is. Hence the best fit value of Ω_{m,0} in the Galileon model is 0.16 from only the growth rate data, which is considerably smaller than such value obtained from observations of supernovae Ia, the cosmic microwave background and baryon acoustic oscillations. We also find the upper limit of the Brans-Dicke parameter to be ω < -1000 (1σ ), from the growth rate data. In this paper, specific galileon models are considered, not the entire class. More and better growth rate data are required to distinguish between dark energy and modified gravity.

  11. Measurement of seedling growth rate by machine vision

    Science.gov (United States)

    Howarth, M. Scott; Stanwood, Phillip C.

    1993-05-01

    Seed vigor and germination tests have traditionally been used to determine deterioration of seed samples. Vigor tests describe the seed potential to emerge and produce a mature crop under certain field conditions and one measure is seedling growth rate. A machine vision system was developed to measure root growth rate over the entire germination period. The machine vision measurement technique was compared to the manual growth rate technique. The vision system provided similar growth rate measurements as compared to the manual growth rate technique. The average error between the system and a manual measurement was -0.13 for the lettuce test and -0.07 for the sorghum test. This technique also provided an accurate representation of the growth rate as well as percent germination.

  12. Near concavity of the growth rate for coupled LDPC chains

    CERN Document Server

    Hassani, S Hamed; Mori, Ryuhei

    2011-01-01

    Convolutional Low-Density-Parity-Check (LDPC) ensembles have excellent performance. Their iterative threshold increases with their average degree, or with the size of the coupling window in randomized constructions. In the later case, as the window size grows, the Belief Propagation (BP) threshold attains the maximum-a-posteriori (MAP) threshold of the underlying ensemble. In this contribution we show that a similar phenomenon happens for the growth rate of coupled ensembles. Loosely speaking, we observe that as the coupling strength grows, the growth rate of the coupled ensemble comes close to the concave hull of the underlying ensemble's growth rate. For ensembles randomly coupled across a window the growth rate actually tends to the concave hull of the underlying one as the window size increases. Our observations are supported by the calculations of the combinatorial growth rate, and that of the growth rate derived from the replica method. The observed concavity is a general feature of coupled mean field g...

  13. Resistive Wall Growth Rate Measurements in the Fermilab Recycler

    Energy Technology Data Exchange (ETDEWEB)

    Ainsworth, R. [Fermilab; Adamson, P. [Fermilab; Burov, A. [Fermilab; Kourbanis, I. [Fermilab

    2016-10-05

    Impedance could represent a limitation of running high intensity beams in the Fermilab recycler. With high intensity upgrades foreseen, it is important to quantify the impedance. To do this,studies have been performed measuring the growth rate of presumably the resistive wall instability. The growth rates at varying intensities and chromaticities are shown. The measured growth rates are compared to ones calculated with the resistive wall impedance.

  14. Delamination Growth in Composites under Fatigue Loading

    NARCIS (Netherlands)

    Khan, R.

    2013-01-01

    Fiber reinforced composites are attractive for aerospace applications due to high specific strength and stiffness. Their use has been gradually increased to 50% by weight of the aircraft over past decades. As a consequence, modern aircraft utilize composites in the primary structures like wing skin

  15. Delamination Growth in Composites under Fatigue Loading

    NARCIS (Netherlands)

    Khan, R.

    2013-01-01

    Fiber reinforced composites are attractive for aerospace applications due to high specific strength and stiffness. Their use has been gradually increased to 50% by weight of the aircraft over past decades. As a consequence, modern aircraft utilize composites in the primary structures like wing skin

  16. Growth rate determinations from radiocarbon in bamboo corals (genus Keratoisis)

    Science.gov (United States)

    Farmer, Jesse R.; Robinson, Laura F.; Hönisch, Bärbel

    2015-11-01

    Radiocarbon (14C) measurements are an important tool for determining growth rates of bamboo corals, a cosmopolitan group of calcitic deep-sea corals. Published growth rate estimates for bamboo corals are highly variable, with potential environmental or ecological drivers of this variability poorly constrained. Here we systematically investigate the application of 14C for growth rate determinations in bamboo corals using 55 14C dates on the calcite and organic fractions of six bamboo corals (identified as Keratoisis sp.) from the western North Atlantic Ocean. Calcite 14C measurements on the distal surface of these corals and five previously published bamboo corals exhibit a strong one-to-one relationship with the 14C of dissolved inorganic carbon (DI14C) in ambient seawater (r2=0.98), confirming the use of Keratoisis sp. calcite 14C as a proxy for seawater 14C activity. Radial growth rates determined from 14C age-depth regressions, 14C plateau tuning and bomb 14C reference chronologies range from 12 to 78 μm y-1, in general agreement with previously published radiometric growth rates. We document potential biases to 14C growth rate determinations resulting from water mass variability, bomb radiocarbon, secondary infilling (ontogeny), and growth rate nonlinearity. Radial growth rates for Keratoisis sp. specimens do not correlate with ambient temperature, suggesting that additional biological and/or environmental factors may influence bamboo coral growth rates.

  17. Delamination toughness of ultra high molecular weight polyethylene (UHMWPE composites

    Directory of Open Access Journals (Sweden)

    Casas-Rodriguez J.P.

    2012-08-01

    Full Text Available Ultra high molecular weight polyethylene (UHMWPE fibre reinforced composites are an important group of material for armours solutions, where their unique combination of properties could be utilized. A commonly observed failure mode in this kind of unidirectional laminated composites under impact ballistic is delamination between the composite layers. In the present study, an investigation on the delamination toughness behaviour exhibited by UHMWPE composites laminated was made. The interlaminar Mode II critical strain energy release rates of (UHMWPE fibre reinforced composites were characterized using the End Notch Flexural (ENF test. Critical strain energy release rate was obtained from the load – deflection test data using the beam theory expression. It was found that the energy release rate of the composite exhibited a very low value of around 60J/m2 using a moulding pressure of approximately 1200 psi. In order to analyse the delamination resistance of composite, the effects of changing the manufacture process variables and the use of a thermoplastic adhesive film in the composites were investigated. The composite laminates were produced by hot compressing moulding using a film-stacking procedure. It was found that the damage resistance of the UHMWPE composite was influenced by the manufacture method, which affects the Mode II interlaminar fracture toughness and the ballistic response of composites.

  18. On the growth rate of the foliicolous lichen Strigula elegans

    NARCIS (Netherlands)

    Wilde-Duyfjes, de B.E.E.

    1967-01-01

    The diametral growth rate of the foliicolous lichen Strigula elegans (Fée) Müll. Arg., measured under natural conditions in the African tropical rainforest, has been established to amount to (0.7-)3-3-6(-8) mm annually. As compared to the diametral growth rate of lichens from temperate regions, whic

  19. GROWTH-RATES OF SHRUBS ON DIFFERENT SOILS IN TANZANIA

    NARCIS (Netherlands)

    PRINS, HHT; VANDERJEUGD, HP

    1992-01-01

    Because little is known of growth rates of shrubs in East Africa, the growth rates of Acalypha fructicosa, Gardenia jovis-tonantis, Justicia cordata, Maerua triphylla, and Ocimum suave were measured in Lake Manyara National Park, northern Tanzania. Branch diameter increments and branch length increm

  20. Growth rates of Leucaena under different systems of tree management

    Energy Technology Data Exchange (ETDEWEB)

    Relwani, L.L.; Deshmukh, S.S.; Khandale, D.Y.; Nakat, R.V.

    1982-01-01

    L. leucocephala was planted at the BAIF campus (18.5 degrees N, 78.8 degrees E) at various spacings and grown with or without irrigation. Growth rates appeared to be satisfactory even under poor moisture conditions, but occasional irrigation during dry periods produced an increase in growth rates. Wider spacings had a greater influence on diameter on breast height than on height.

  1. Growth rates of intracranial aneurysms : exploring constancy

    NARCIS (Netherlands)

    Koffijberg, Hendrik; Buskens, Erik; Algra, Ale; Wermer, Marieke J. H.; Rinkel, Gabriel J. E.

    2008-01-01

    Object. The annual rate of rupture of intracranial aneurysms is often assumed to be constant, but it is unknown whether this assumption is true. Recent case reports have suggested that aneurysms grow fast in a short period of time. The authors of the present report investigated the plausibility of a

  2. Larval developmental rate, metabolic rate and future growth performance in Atlantic salmon

    DEFF Research Database (Denmark)

    Serrano, Jonathan Vaz; Åberg, Madelene; Gjoen, Hans Magnus;

    2009-01-01

    Previous studies in salmonids suggest a link between larval developmental rate, metabolic rate, and future growth. However, the connection between growth during exogenous and endogenous feeding is still debated. In the current study, a positive relationship between larval developmental rate, quan...

  3. Are high real interest rates bad for world economic growth?

    OpenAIRE

    1991-01-01

    There is a conventional perception that high real interest rates are bad for economic growth. However, the authors show that close examination of the experience over the last 40 years undermines the existence of such a relationship. For much of the 1950-79 period, expost real interest rates were less than the growth rate of income in the major economies, whereas the 1980s were a period of rapid growth in the world economy that coincided withunprecedentedly high real interest rates. The author...

  4. Allometries of maximum growth rate versus body mass at maximum growth indicate that non-avian dinosaurs had growth rates typical of fast growing ectothermic sauropsids.

    Directory of Open Access Journals (Sweden)

    Jan Werner

    Full Text Available We tested if growth rates of recent taxa are unequivocally separated between endotherms and ectotherms, and compared these to dinosaurian growth rates. We therefore performed linear regression analyses on the log-transformed maximum growth rate against log-transformed body mass at maximum growth for extant altricial birds, precocial birds, eutherians, marsupials, reptiles, fishes and dinosaurs. Regression models of precocial birds (and fishes strongly differed from Case's study (1978, which is often used to compare dinosaurian growth rates to those of extant vertebrates. For all taxonomic groups, the slope of 0.75 expected from the Metabolic Theory of Ecology was statistically supported. To compare growth rates between taxonomic groups we therefore used regressions with this fixed slope and group-specific intercepts. On average, maximum growth rates of ectotherms were about 10 (reptiles to 20 (fishes times (in comparison to mammals or even 45 (reptiles to 100 (fishes times (in comparison to birds lower than in endotherms. While on average all taxa were clearly separated from each other, individual growth rates overlapped between several taxa and even between endotherms and ectotherms. Dinosaurs had growth rates intermediate between similar sized/scaled-up reptiles and mammals, but a much lower rate than scaled-up birds. All dinosaurian growth rates were within the range of extant reptiles and mammals, and were lower than those of birds. Under the assumption that growth rate and metabolic rate are indeed linked, our results suggest two alternative interpretations. Compared to other sauropsids, the growth rates of studied dinosaurs clearly indicate that they had an ectothermic rather than an endothermic metabolic rate. Compared to other vertebrate growth rates, the overall high variability in growth rates of extant groups and the high overlap between individual growth rates of endothermic and ectothermic extant species make it impossible to rule

  5. Allometries of maximum growth rate versus body mass at maximum growth indicate that non-avian dinosaurs had growth rates typical of fast growing ectothermic sauropsids.

    Science.gov (United States)

    Werner, Jan; Griebeler, Eva Maria

    2014-01-01

    We tested if growth rates of recent taxa are unequivocally separated between endotherms and ectotherms, and compared these to dinosaurian growth rates. We therefore performed linear regression analyses on the log-transformed maximum growth rate against log-transformed body mass at maximum growth for extant altricial birds, precocial birds, eutherians, marsupials, reptiles, fishes and dinosaurs. Regression models of precocial birds (and fishes) strongly differed from Case's study (1978), which is often used to compare dinosaurian growth rates to those of extant vertebrates. For all taxonomic groups, the slope of 0.75 expected from the Metabolic Theory of Ecology was statistically supported. To compare growth rates between taxonomic groups we therefore used regressions with this fixed slope and group-specific intercepts. On average, maximum growth rates of ectotherms were about 10 (reptiles) to 20 (fishes) times (in comparison to mammals) or even 45 (reptiles) to 100 (fishes) times (in comparison to birds) lower than in endotherms. While on average all taxa were clearly separated from each other, individual growth rates overlapped between several taxa and even between endotherms and ectotherms. Dinosaurs had growth rates intermediate between similar sized/scaled-up reptiles and mammals, but a much lower rate than scaled-up birds. All dinosaurian growth rates were within the range of extant reptiles and mammals, and were lower than those of birds. Under the assumption that growth rate and metabolic rate are indeed linked, our results suggest two alternative interpretations. Compared to other sauropsids, the growth rates of studied dinosaurs clearly indicate that they had an ectothermic rather than an endothermic metabolic rate. Compared to other vertebrate growth rates, the overall high variability in growth rates of extant groups and the high overlap between individual growth rates of endothermic and ectothermic extant species make it impossible to rule out either of

  6. Aortic growth rates in chronic aortic dissection

    Energy Technology Data Exchange (ETDEWEB)

    Kelly, A.M. [Department of Radiology, Division of Thoracic Radiology, University of Michigan Medical Center (United States)]. E-mail: ainekell@med.umich.edu; Quint, L.E. [Department of Radiology, Division of Thoracic Radiology, University of Michigan Medical Center (United States); Nan, B. [School of Public Health, University of Michigan, Ann Arbor, Michigan (United States); Zheng, J. [School of Public Health, University of Michigan, Ann Arbor, Michigan (United States); Cronin, P. [Department of Radiology, Division of Thoracic Radiology, University of Michigan Medical Center (United States); Deeb, G.M. [Division of Cardiac Surgery, University of Michigan Medical Center (United States); Williams, D.M. [Division of Vascular Interventional Imaging, University of Michigan Medical Center (United States)

    2007-09-15

    Aim: To determine and compare rates of descending aortic enlargement and complications in chronic aortic dissection with and without a proximal aortic graft. Methods and materials: Fifty-two patients with dissection involving the descending aorta and who had undergone at least two computed tomography (CT) examinations at our institution between November, 1993 and February, 2004 were identified, including 24 non-operated patients (four type A, 20 type B) and 28 operated patients (type A). CT examinations per patient ranged from two to 10, and follow-up ranged from 1-123 months (mean 49 months, median 38.5 months). On each CT image, the aortic short axis (SA), false lumen (FL), and true lumen (TL) diameters were measured at the longitudinal midpoint of the dissection and at the point of maximum aortic diameter. Complications were tabulated, including aortic rupture and aortic enlargement requiring surgery. Results: For non-operated patients, the midpoint and maximum point SA, TL, and FL diameters increased significantly over time. For operated patients, the midpoint and maximum point SA and FL diameters increased significantly over time. In both groups, aortic enlargement was predominantly due to FL expansion. Diameter increases in non-operated patients were significantly larger than those in operated patients. The rate of change in aortic diameter was constant, regardless of aortic size. Four non-operated and six operated patients developed aortic complications. Conclusions: In patients with a dissection involving the descending thoracic aorta, the FL increased in diameter over time, at a constant rate, and to a greater degree in non-operated patients (mostly type B) compared with operated patients (all type A)

  7. The RNA chain elongation rate in Escherichia coli depends on the growth rate

    DEFF Research Database (Denmark)

    Vogel, Ulla; Jensen, Kaj Frank

    1994-01-01

    We determined the rates of mRNA and protein chain elongation on the lacZ gene during exponential growth on different carbon sources. The RNA chain elongation rate was calculated from measurements of the time elapsing between induction of lacZ expression and detection of specific hybridization...... with a probe near the 3' end of the mRNA. The elongation rate for the transcripts decreased 40% when the growth rate decreased by a factor of 4, and it always correlated with the rate of translation elongation. A similar growth rate dependency was seen for transcription on the infB gene and on a part...

  8. Can we estimate bacterial growth rates from ribosomal RNA content?

    Energy Technology Data Exchange (ETDEWEB)

    Kemp, P.F.

    1995-12-31

    Several studies have demonstrated a strong relationship between the quantity of RNA in bacterial cells and their growth rate under laboratory conditions. It may be possible to use this relationship to provide information on the activity of natural bacterial communities, and in particular on growth rate. However, if this approach is to provide reliably interpretable information, the relationship between RNA content and growth rate must be well-understood. In particular, a requisite of such applications is that the relationship must be universal among bacteria, or alternately that the relationship can be determined and measured for specific bacterial taxa. The RNA-growth rate relationship has not been used to evaluate bacterial growth in field studies, although RNA content has been measured in single cells and in bulk extracts of field samples taken from coastal environments. These measurements have been treated as probable indicators of bacterial activity, but have not yet been interpreted as estimators of growth rate. The primary obstacle to such interpretations is a lack of information on biological and environmental factors that affect the RNA-growth rate relationship. In this paper, the available data on the RNA-growth rate relationship in bacteria will be reviewed, including hypotheses regarding the regulation of RNA synthesis and degradation as a function of growth rate and environmental factors; i.e. the basic mechanisms for maintaining RNA content in proportion to growth rate. An assessment of the published laboratory and field data, the current status of this research area, and some of the remaining questions will be presented.

  9. From Asymetrical Growth Rate Distributions to Multiple Normal Distributions

    Science.gov (United States)

    Žekić, A. A.; Mitrović, M. M.

    2007-04-01

    Growth rate dispersion (GRD) represents the variations in the growth rates of different crystals of the same material, grown under the same conditions. Mostly, these dispersions are decribed by asymetrical distributions with one maximum, and skeved to the right (log-normal and gamma). Recently, it was shown that the GRD of a crystals can be described by distributions with more maxima (multiple normal distribution). The analysis of the number and the height of the growth rate dispersions maxima has been performed. This analysis is shown the first or the second maximum has the maximal height, which results in asymetry of the distributions. This is the reason for the right GRD skeveness for the small number of crystal growth rates analysed. The results are discussed in accordance with crystal growth theories.

  10. A Test for Characterizing Delamination Migration in Carbon/Epoxy Tape Laminates

    Science.gov (United States)

    Ratcliffe, James G.; Czabaj, Michael W.; O'Brien, Thomas K.

    2013-01-01

    A new test method is presented for the purpose of investigating migration of a delamination between neighboring ply interfaces in fiber-reinforced, polymer matrix tape laminates. The test is a single cantilever beam configuration consisting of a cross-ply laminate with a polytetrafluoroethylene insert implanted at the mid-plane and spanning part way along the length of the specimen. The insert is located between a 0- degree ply (specimen length direction) and a stack of four 90-degree plies (specimen width direction). The specimen is clamped at both ends onto a rigid baseplate and is loaded on its upper surface via a piano hinge. Tests were conducted with the load-application point located on the intact portion of the specimen in order to initiate delamination growth onset followed by migration of the delamination to a neighboring 90/0 ply interface by kinking through the 90-degree ply stack. Varying this position was found to affect the distance relative to the load-application point at which migration initiated. In each specimen, migration initiated by a gradual transition of the delamination at the 0/90 interface into the 90-degree ply stack. In contrast, transition of the kinked crack into the 90/0 interface was sudden. Fractography of the specimens indicated that delamination prior to migration was generally mixed mode-I/II. Inspection of the kink surface revealed mode-I fracture. In general, use of this test allows for the observation of the growth of a delamination followed by migration of the delamination to another ply interface, and should thus provide a means for validating analyses aimed at simulating migration.

  11. The effect of compensatory growth on feed intake, growth rate and ...

    African Journals Online (AJOL)

    after a time of feed restriction, restricted animals exhibit a growth rate ... change in composition of growth, which indicate that more protein but ..... fasting metabolism reached a maximum at about midsummer ..... The effects of weight loss and.

  12. Growth and development rates have different thermal responses.

    Science.gov (United States)

    Forster, Jack; Hirst, Andrew G; Woodward, Guy

    2011-11-01

    Growth and development rates are fundamental to all living organisms. In a warming world, it is important to determine how these rates will respond to increasing temperatures. It is often assumed that the thermal responses of physiological rates are coupled to metabolic rate and thus have the same temperature dependence. However, the existence of the temperature-size rule suggests that intraspecific growth and development are decoupled. Decoupling of these rates would have important consequences for individual species and ecosystems, yet this has not been tested systematically across a range of species. We conducted an analysis on growth and development rate data compiled from the literature for a well-studied group, marine pelagic copepods, and use an information-theoretic approach to test which equations best describe these rates. Growth and development rates were best characterized by models with significantly different parameters: development has stronger temperature dependence than does growth across all life stages. As such, it is incorrect to assume that these rates have the same temperature dependence. We used the best-fit models for these rates to predict changes in organism mass in response to temperature. These predictions follow a concave relationship, which complicates attempts to model the impacts of increasing global temperatures on species body size.

  13. Allometries of Maximum Growth Rate versus Body Mass at Maximum Growth Indicate That Non-Avian Dinosaurs Had Growth Rates Typical of Fast Growing Ectothermic Sauropsids

    OpenAIRE

    Jan Werner; Eva Maria Griebeler

    2014-01-01

    We tested if growth rates of recent taxa are unequivocally separated between endotherms and ectotherms, and compared these to dinosaurian growth rates. We therefore performed linear regression analyses on the log-transformed maximum growth rate against log-transformed body mass at maximum growth for extant altricial birds, precocial birds, eutherians, marsupials, reptiles, fishes and dinosaurs. Regression models of precocial birds (and fishes) strongly differed from Case's study (1978), which...

  14. Optical Evaluation on Delamination Buckling of Composite Laminate with Impact Damage

    Directory of Open Access Journals (Sweden)

    J. T. Ruan

    2014-01-01

    Full Text Available The delamination buckling and growth behaviors of a cross-ply composite laminate with damage induced by low velocity impact are investigated optically using three-dimensional digital image correlation (3D-DIC method. For the 3D deformation measurement, the 3D-DIC setup comprised of two CCD cameras was adopted. The rectangle specimen was impacted under the impact energy of 7.0 J using a drop-weight testing machine, and the impact damage was detected by means of X-ray nondestructive evaluation (NDE technique. The 3D deformation field measured with the optical system clearly reveals that the delamination buckling characteristic of the specimen mainly appears local deformation mode under compression after impact test. Moreover, the behavior of delamination growth evaluated by the 3D-DIC optical method reasonably agrees with the NDE observed damage result after compression.

  15. Tree Growth Rates in the Periodically Flooded Great Dismal Swamp

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Tree diameter growth rates were measured in the Great Dismal Swamp, Virginia using vernier tree bands. Measurements were made in cypress, cedar, maple-gum, and mixed...

  16. Effect of different saccharides on growth, sporulation rate and d ...

    African Journals Online (AJOL)

    MFCS

    2012-05-17

    May 17, 2012 ... parasporal insecticidal crystal proteins (ICPs) known as δ-endotoxin and ... growth, sporulation rate and toxin production during cultivation using various ..... bacteria: choice of the carbon source and autoregulatory limitation of.

  17. Global evidence on the distribution of GDP growth rates

    Science.gov (United States)

    Williams, Michael A.; Baek, Grace; Li, Yiyang; Park, Leslie Y.; Zhao, Wei

    2017-02-01

    We study the size distribution of changes in the gross domestic product (GDP) of 167 countries for the period 1950-2011. A consensus has developed in the literature that the distribution of GDP growth rates can be approximated by the Laplace distribution in the central part and power-law distributions in the tails. Using a richer database than prior studies and testing for more theoretical distributions, we find that the distribution of GDP growth rates can be fitted using the heavy-tailed Cauchy distribution for almost all countries. Significantly, this same finding recently has been demonstrated for (1) the distribution of firm growth rates and (2) the distribution of firm economic profit rates. Together, these three findings suggest the possibility that there exist universal mechanisms that give rise to general laws governing the growth dynamics of firms and economies.

  18. Computing the crystal growth rate by the interface pinning method

    DEFF Research Database (Denmark)

    Pedersen, Ulf Rørbæk; Hummel, Felix; Dellago, Christoph

    2015-01-01

    -phase configurations are stabilized by adding a spring-like bias field coupling to an order-parameter that discriminates between the two phases. Crystal growth is a Smoluchowski process and the crystal growth rate can, therefore, be computed from the terminal exponential relaxation of the order parameter. The approach...... from first principles. A generalized version of the method may be used for computing the rates of crystal nucleation or other rare events....

  19. What determines the rate of growth and technological change?

    OpenAIRE

    ROMER, Paul M.

    1989-01-01

    There is substantial research about cross section and time series correlations between economic growth and various economic, social, demographic and political variables. After analyzing these correlations, the paper makes the following conclusions. Exogenous increases do not seem to cause increases in the rate of technological change, but instead seem to be associated with lower rates of return to capital. Increased openness to international trade speeds up growth and technological change as ...

  20. Protein thermodynamics can be predicted directly from biological growth rates.

    Science.gov (United States)

    Corkrey, Ross; McMeekin, Tom A; Bowman, John P; Ratkowsky, David A; Olley, June; Ross, Tom

    2014-01-01

    Life on Earth is capable of growing from temperatures well below freezing to above the boiling point of water, with some organisms preferring cooler and others hotter conditions. The growth rate of each organism ultimately depends on its intracellular chemical reactions. Here we show that a thermodynamic model based on a single, rate-limiting, enzyme-catalysed reaction accurately describes population growth rates in 230 diverse strains of unicellular and multicellular organisms. Collectively these represent all three domains of life, ranging from psychrophilic to hyperthermophilic, and including the highest temperature so far observed for growth (122 °C). The results provide credible estimates of thermodynamic properties of proteins and obtain, purely from organism intrinsic growth rate data, relationships between parameters previously identified experimentally, thus bridging a gap between biochemistry and whole organism biology. We find that growth rates of both unicellular and multicellular life forms can be described by the same temperature dependence model. The model results provide strong support for a single highly-conserved reaction present in the last universal common ancestor (LUCA). This is remarkable in that it means that the growth rate dependence on temperature of unicellular and multicellular life forms that evolved over geological time spans can be explained by the same model.

  1. Protein thermodynamics can be predicted directly from biological growth rates.

    Directory of Open Access Journals (Sweden)

    Ross Corkrey

    Full Text Available Life on Earth is capable of growing from temperatures well below freezing to above the boiling point of water, with some organisms preferring cooler and others hotter conditions. The growth rate of each organism ultimately depends on its intracellular chemical reactions. Here we show that a thermodynamic model based on a single, rate-limiting, enzyme-catalysed reaction accurately describes population growth rates in 230 diverse strains of unicellular and multicellular organisms. Collectively these represent all three domains of life, ranging from psychrophilic to hyperthermophilic, and including the highest temperature so far observed for growth (122 °C. The results provide credible estimates of thermodynamic properties of proteins and obtain, purely from organism intrinsic growth rate data, relationships between parameters previously identified experimentally, thus bridging a gap between biochemistry and whole organism biology. We find that growth rates of both unicellular and multicellular life forms can be described by the same temperature dependence model. The model results provide strong support for a single highly-conserved reaction present in the last universal common ancestor (LUCA. This is remarkable in that it means that the growth rate dependence on temperature of unicellular and multicellular life forms that evolved over geological time spans can be explained by the same model.

  2. Seasonal variations in ectotherm growth rates: Quantifying growth as an intermittent non steady state compensatory process

    Science.gov (United States)

    Guarini, J.-M.; Chauvaud, Laurent; Cloern, J.E.; Clavier, J.; Coston-Guarini, J.; Patry, Y.

    2011-01-01

    Generally, growth rates of living organisms are considered to be at steady state, varying only under environmental forcing factors. For example, these rates may be described as a function of light for plants or organic food resources for animals and these could be regulated (or not) by temperature or other conditions. But, what are the consequences for an individual's growth (and also for the population growth) if growth rate variations are themselves dynamic and not steady state? For organisms presenting phases of dormancy or long periods of stress, this is a crucial question. A dynamic perspective for quantifying short-term growth was explored using the daily growth record of the scallop Pecten maximus (L.). This species is a good biological model for ectotherm growth because the shell records growth striae daily. Independently, a generic mathematical function representing the dynamics of mean daily growth rate (MDGR) was implemented to simulate a diverse set of growth patterns. Once the function was calibrated with the striae patterns, the growth rate dynamics appeared as a forced damped oscillation during the growth period having a basic periodicity during two transitory phases (mean duration 43. days) and appearing at both growth start and growth end. This phase is most likely due to the internal dynamics of energy transfer within the organism rather than to external forcing factors. After growth restart, the transitory regime represents successive phases of over-growth and regulation. This pattern corresponds to a typical representation of compensatory growth, which from an evolutionary perspective can be interpreted as an adaptive strategy to coping with a fluctuating environment. ?? 2011 Elsevier B.V.

  3. Response of Escherichia coli growth rate to osmotic shock.

    Science.gov (United States)

    Rojas, Enrique; Theriot, Julie A; Huang, Kerwyn Casey

    2014-05-27

    It has long been proposed that turgor pressure plays an essential role during bacterial growth by driving mechanical expansion of the cell wall. This hypothesis is based on analogy to plant cells, for which this mechanism has been established, and on experiments in which the growth rate of bacterial cultures was observed to decrease as the osmolarity of the growth medium was increased. To distinguish the effect of turgor pressure from pressure-independent effects that osmolarity might have on cell growth, we monitored the elongation of single Escherichia coli cells while rapidly changing the osmolarity of their media. By plasmolyzing cells, we found that cell-wall elastic strain did not scale with growth rate, suggesting that pressure does not drive cell-wall expansion. Furthermore, in response to hyper- and hypoosmotic shock, E. coli cells resumed their preshock growth rate and relaxed to their steady-state rate after several minutes, demonstrating that osmolarity modulates growth rate slowly, independently of pressure. Oscillatory hyperosmotic shock revealed that although plasmolysis slowed cell elongation, the cells nevertheless "stored" growth such that once turgor was reestablished the cells elongated to the length that they would have attained had they never been plasmolyzed. Finally, MreB dynamics were unaffected by osmotic shock. These results reveal the simple nature of E. coli cell-wall expansion: that the rate of expansion is determined by the rate of peptidoglycan insertion and insertion is not directly dependent on turgor pressure, but that pressure does play a basic role whereby it enables full extension of recently inserted peptidoglycan.

  4. SPATULA links daytime temperature and plant growth rate.

    Science.gov (United States)

    Sidaway-Lee, Kate; Josse, Eve-Marie; Brown, Alanna; Gan, Yinbo; Halliday, Karen J; Graham, Ian A; Penfield, Steven

    2010-08-24

    Plants exhibit a wide variety of growth rates that are known to be determined by genetic and environmental factors, and different plants grow optimally at different temperatures, indicating that this is a genetically determined character. Moderate decreases in ambient temperature inhibit vegetative growth, but the mechanism is poorly understood, although a decrease in gibberellin (GA) levels is known to be required. Here we demonstrate that the basic helix-loop-helix transcription factor SPATULA (SPT), previously known to be a regulator of low temperature-responsive germination, mediates the repression of growth by cool daytime temperatures but has little or no growth-regulating role under warmer conditions. We show that only daytime temperatures affect vegetative growth and that SPT couples morning temperature to growth rate. In seedlings, warm temperatures inhibit the accumulation of the SPT protein, and SPT autoregulates its own transcript abundance in conjunction with diurnal effects. Genetic data show that repression of growth by SPT is independent of GA signaling and phytochrome B, as previously shown for PIF4. Our data suggest that SPT integrates time of day and temperature signaling to control vegetative growth rate.

  5. Effect of selection for relative growth rate and bodyweight of mice on rate, composition and efficiency of growth

    NARCIS (Netherlands)

    Bakker, H.

    1974-01-01

    To evaluate the effect of selection for parameters of a growth curve, four selection lines and a control line were started from one base population. In the selection lines is selected for a large and a small relative growth rate between 21 and 29 days (RGH and RGL) and for a large and small bodyweig

  6. Investigation of growth rate dispersion in lactose crystallisation by AFM

    Science.gov (United States)

    Dincer, T. D.; Ogden, M. I.; Parkinson, G. M.

    2014-09-01

    α-Lactose monohydrate crystals have been reported to exhibit growth rate dispersion (GRD). Variation in surface dislocations has been suggested as the cause of GRD, but this has not been further investigated to date. In this study, growth rate dispersion and the change in morphology were investigated in situ and via bottle roller experiments. The surfaces of the (0 1 0) faces of crystals were examined with Atomic Force Microscopy. Smaller, slow growing crystals tend to have smaller (0 1 0) faces with narrow bases and displayed a single double spiral in the centre of the crystal with 2 nm high steps. Additional double spirals in other crystals resulted in faster growth rates. Large, fast growing crystals were observed to have larger (0 1 0) faces with fast growth in both the a and b directions (giving a broader crystal base) with macro steps parallel to the (c direction). The number and location of spirals or existence of macro steps appears to influence the crystal morphology, growth rates and growth rate dispersion in lactose crystals.

  7. Seasonal growth rate of the sponge Haliclona oculata (Demospongiae: Haplosclerida).

    Science.gov (United States)

    Koopmans, Marieke; Wijffels, René H

    2008-01-01

    The interest in sponges has increased rapidly since the discovery of potential new pharmaceutical compounds produced by many sponges. A good method to produce these compounds by using aquaculture of sponges is not yet available, because there is insufficient knowledge about the nutritional needs of sponges. To gain more insight in the nutritional needs for growth, we studied the growth rate of Haliclona oculata in its natural environment and monitored environmental parameters in parallel. A stereo photogrammetry approach was used for measuring growth rates. Stereo pictures were taken and used to measure volumetric changes monthly during 1 year. Volumetric growth rate of Haliclona oculata showed a seasonal trend with the highest average specific growth rate measured in May: 0.012 +/- 0.004 day(-1). In our study a strong positive correlation (p rate with temperature, algal biomass (measured as chlorophyll a), and carbon and nitrogen content in suspended particulate matter. A negative correlation (p rate with salinity, ammonium, nitrate, nitrite, and phosphate. No correlation was found with dissolved organic carbon, suggesting that Haliclona oculata is more dependent on particulate organic carbon.

  8. Medium-dependent control of the bacterial growth rate.

    Science.gov (United States)

    Ehrenberg, Måns; Bremer, Hans; Dennis, Patrick P

    2013-04-01

    By combining results from previous studies of nutritional up-shifts we here re-investigate how bacteria adapt to different nutritional environments by adjusting their macromolecular composition for optimal growth. We demonstrate that, in contrast to a commonly held view the macromolecular composition of bacteria does not depend on the growth rate as an independent variable, but on three factors: (i) the genetic background (i.e. the strain used), (ii) the physiological history of the bacteria used for inoculation of a given growth medium, and (iii) the kind of nutrients in the growth medium. These factors determine the ribosome concentration and the average rate of protein synthesis per ribosome, and thus the growth rate. Immediately after a nutritional up-shift, the average number of ribosomes in the bacterial population increases exponentially with time at a rate which eventually is attained as the final post-shift growth rate of all cell components. After a nutritional up-shift from one minimal medium to another minimal medium of higher nutritional quality, ribosome and RNA polymerase syntheses are co-regulated and immediately increase by the same factor equal to the increase in the final growth rate. However, after an up-shift from a minimal medium to a medium containing all 20 amino acids, RNA polymerase and ribosome syntheses are no longer coregulated; a smaller rate of synthesis of RNA polymerase is compensated by a gradual increase in the fraction of free RNA polymerase, possibly due to a gradual saturation of mRNA promoters. We have also analyzed data from a recent publication, in which it was concluded that the macromolecular composition in terms of RNA/protein and RNA/DNA ratios is solely determined by the effector molecule ppGpp. Our analysis indicates that this is true only in special cases and that, in general, medium adaptation also depends on factors other than ppGpp.

  9. The effect of size and competition on tree growth rate in old-growth coniferous forests

    Science.gov (United States)

    Das, Adrian

    2012-01-01

    Tree growth and competition play central roles in forest dynamics. Yet models of competition often neglect important variation in species-specific responses. Furthermore, functions used to model changes in growth rate with size do not always allow for potential complexity. Using a large data set from old-growth forests in California, models were parameterized relating growth rate to tree size and competition for four common species. Several functions relating growth rate to size were tested. Competition models included parameters for tree size, competitor size, and competitor distance. Competitive strength was allowed to vary by species. The best ranked models (using Akaike’s information criterion) explained between 18% and 40% of the variance in growth rate, with each species showing a strong response to competition. Models indicated that relationships between competition and growth varied substantially among species. The results also suggested that the relationship between growth rate and tree size can be complex and that how we model it can affect not only our ability to detect that complexity but also whether we obtain misleading results. In this case, for three of four species, the best model captured an apparent and unexpected decline in potential growth rate for the smallest trees in the data set.

  10. Delamination of Compressed thin Layers at Corners

    DEFF Research Database (Denmark)

    Clausen, Johan; Jensen, Henrik Myhre; Sørensen, Kim Dalsten

    2008-01-01

    An analysis of delamination for a thin elastic film, attached to a substrate with a corner, is carried out. The film is in compression and the analysis is performed by combining results from fracture mechanics and the theory of thin shells. The results show a very strong dependency of the angle...

  11. Failure and Delamination in Microelectronic Packages

    NARCIS (Netherlands)

    Sadeghinia, M.

    2013-01-01

    Thin layers of dissimilar materials are used in most microelectronic components in order to achieve special functional requirements. Generally, the interface between two adjacent materials forms a weak link, not only because of the relatively low delamination strength, but also because of the existi

  12. Bending strength of delaminated aerospace composites.

    Science.gov (United States)

    Kinawy, Moustafa; Butler, Richard; Hunt, Giles W

    2012-04-28

    Buckling-driven delamination is considered among the most critical failure modes in composite laminates. This paper examines the propagation of delaminations in a beam under pure bending. A pre-developed analytical model to predict the critical buckling moment of a thin sub-laminate is extended to account for propagation prediction, using mixed-mode fracture analysis. Fractography analysis is performed to distinguish between mode I and mode II contributions to the final failure of specimens. Comparison between experimental results and analysis shows agreement to within 5 per cent in static propagation moment for two different materials. It is concluded that static fracture is almost entirely driven by mode II effects. This result was unexpected because it arises from a buckling mode that opens the delamination. For this reason, and because of the excellent repeatability of the experiments, the method of testing may be a promising means of establishing the critical value of mode II fracture toughness, G(IIC), of the material. Fatigue testing on similar samples showed that buckled delamination resulted in a fatigue threshold that was over 80 per cent lower than the static propagation moment. Such an outcome highlights the significance of predicting snap-buckling moment and subsequent propagation for design purposes.

  13. An automated dynamic fracture procedure and a continuum damage mechanics based model for finite element simulations of delamination failure in laminated composites

    Science.gov (United States)

    Aminjikarai Vedagiri, Srinivasa Babu

    An active field of research that has developed due to the increasing use of computational techniques like finite element simulations for analysis of highly complex structural mechanics problems and the increasing use of composite laminates in varied industries such as aerospace, automotive, bio-medical, etc. is the development of numerical models to capture the behavior of composite materials. One of the big challenges not yet overcome convincingly in this field is the modeling of delamination failure which is one of the primary modes of damage in composite laminates. Hence, the primary aim of this work is to develop two numerical models for finite element simulations of delamination failure in composite laminates and implement them in the explicit finite element software DYNA3D/LS-DYNA. Dynamic fracture mechanics is an example of a complex structural analysis problem for which finite element simulations seem to be the only possible way to extract detailed information on sophisticated physical quantities of the crack-tip at any instant of time along a highly transient history of fracture. However, general purpose, commercial finite element software which have capabilities to do fracture analyses are still limited in their use to stationary cracks and crack propagation along trajectories known a priori. Therefore, an automated dynamic fracture procedure capable of simulating dynamic propagation of through-thickness cracks in arbitrary directions in linear, isotropic materials without user-intervention is first developed and implemented in DYNA3D for its default 8-node solid (brick) element. Dynamic energy release rate and stress intensity factors are computed in the model using integral expressions particularly well-suited for the finite element method. Energy approach is used to check for crack propagation and the maximum circumferential stress criterion is used to determine the direction of crack growth. Since the re-meshing strategy used to model crack growth

  14. Coral growth rates revisited after 31 years: what is causing lower extension rates in Acropora palmata?

    NARCIS (Netherlands)

    Bak, R.P.M.; Nieuwland, G.; Meesters, H.W.G.

    2009-01-01

    Linear extension of branches in the same Acropora palmata (Lamarck, 1816) population in Curaçao was measured, employing exactly the same methods, in 1971-1973 and in 2002-2004, and the resulting coral growth rates are compared. Linear growth shows the same pattern over seasons in both periods with g

  15. Geometry of shoot apical dome and distribution of growth rates

    Directory of Open Access Journals (Sweden)

    Jerzy Nakielski

    2014-01-01

    Full Text Available The distribution of the relative elementary rate of growth (RERG in apical domes of various shapes and patterns of displacement lines can be analytically examined. The geometry of these domes may be described by parabolas of n-th order, the variant of the distribution of linear growth rate should be established along any displacement line (e.g. along the axis and then the RERG can be studied as the function depending on the position coordinates and the parameter n. Such investigations of several aplical domes of various shapes have been performed. The results confirm the occurrence of the minimum of relative, elementary growth rate (in volume in the subapical region of the dome independently of the type of geometry (n parabola order.

  16. Influence of corruption on economic growth rate and foreign investment

    Science.gov (United States)

    Podobnik, Boris; Shao, Jia; Njavro, Djuro; Ivanov, Plamen Ch.; Stanley, H. E.

    2008-06-01

    We analyze the dependence of the Gross Domestic Product ( GDP) per capita growth rates on changes in the Corruption Perceptions Index ( CPI). For the period 1999 2004 for all countries in the world, we find on average that an increase of CPI by one unit leads to an increase of the annual GDP per capita growth rate by 1.7%. By regressing only the European countries with transition economies, we find that an increase of CPI by one unit generates an increase of the annual GDP per capita growth rate by 2.4%. We also analyze the relation between foreign direct investments received by different countries and CPI, and we find a statistically significant power-law functional dependence between foreign direct investment per capita and the country corruption level measured by the CPI. We introduce a new measure to quantify the relative corruption between countries based on their respective wealth as measured by GDP per capita.

  17. Scaling of Growth Rate Volatility for Six Macroeconomic Variables

    Directory of Open Access Journals (Sweden)

    Boris Podobnik

    2012-06-01

    Full Text Available We study the annual growth rates of six macroeconomic variables: public debt, public health expenditures, exports of goods, government consumption expenditures, total exports of goods and services, and total imports of goods and services. For each variable, we find (i that the distribution of the growth rate residuals approximately follows a double exponential (Laplace distribution and (ii that the standard deviation of growth rate residuals scales according to the size of the variable as a power law, with a scaling exponent similar to the scaling exponent found for GDP [Economics Letters 60, 335 (1998]. We hypothesise that the volatility scaling we find for these GDP constituents causes the volatility scaling found in GDP data.

  18. Radiocarbon Based Ages and Growth Rates: Hawaiian Deep Sea Corals

    Energy Technology Data Exchange (ETDEWEB)

    Roark, E B; Guilderson, T P; Dunbar, R B; Ingram, B L

    2006-01-13

    The radial growth rates and ages of three different groups of Hawaiian deep-sea 'corals' were determined using radiocarbon measurements. Specimens of Corallium secundum, Gerardia sp., and Leiopathes glaberrima, were collected from 450 {+-} 40 m at the Makapuu deep-sea coral bed using a submersible (PISCES V). Specimens of Antipathes dichotoma were collected at 50 m off Lahaina, Maui. The primary source of carbon to the calcitic C. secundum skeleton is in situ dissolved inorganic carbon (DIC). Using bomb {sup 14}C time markers we calculate radial growth rates of {approx} 170 {micro}m y{sup -1} and ages of 68-75 years on specimens as tall as 28 cm of C. secundum. Gerardia sp., A. dichotoma, and L. glaberrima have proteinaceous skeletons and labile particulate organic carbon (POC) is their primary source of architectural carbon. Using {sup 14}C we calculate a radial growth rate of 15 {micro}m y{sup -1} and an age of 807 {+-} 30 years for a live collected Gerardia sp., showing that these organisms are extremely long lived. Inner and outer {sup 14}C measurements on four sub-fossil Gerardia spp. samples produce similar growth rate estimates (range 14-45 {micro}m y{sup -1}) and ages (range 450-2742 years) as observed for the live collected sample. Similarly, with a growth rate of < 10 {micro}m y{sup -1} and an age of {approx}2377 years, L. glaberrima at the Makapuu coral bed, is also extremely long lived. In contrast, the shallow-collected A. dichotoma samples yield growth rates ranging from 130 to 1,140 {micro}m y{sup -1}. These results show that Hawaiian deep-sea corals grow more slowly and are older than previously thought.

  19. Effect of tool geometry and cutting parameters on delamination and thrust forces in drilling CFRP/Al-Li

    Science.gov (United States)

    El Bouami, Souhail; Habak, Malek; Franz, Gérald; Velasco, Raphaël; Vantomme, Pascal

    2016-10-01

    Composite materials are increasingly used for structural parts in the aeronautic industries. Carbon Fiber-Reinforced Plastics (CFRP) are often used in combination with metallic materials, mostly aluminium alloys. This raises new problems in aircraft assembly. Delamination is one of these problems. In this study, CFRP/Al-Li stacks is used as experimental material for investigation effect of interaction of cutting parameters (cutting speed and feed rate) and tool geometry on delamination and thrust forces in drilling operation. A plan of experiments, based on Taguchi design method, was employed to investigate the influence of tool geometry and in particular the point angle and cutting parameters on delamination and axial effort. The experimental results demonstrate that the feed rate is the major parameter and the importance of tool point angle in delamination and thrust forces in the stacks were shown.

  20. Nanocrystalline silicon prepared at high growth rate using helium dilution

    Indian Academy of Sciences (India)

    Koyel Bhattacharya; Debajyoti Das

    2008-06-01

    Growth and optimization of the nanocrystalline silicon (nc-Si : H) films have been studied by varying the electrical power applied to the helium diluted silane plasma in RF glow discharge. Wide optical gap and conducting intrinsic nanocrystalline silicon network of controlled crystalline volume fraction and oriented crystallographic lattice planes have been obtained at a reasonably high growth rate from helium diluted silane plasma, without using hydrogen. Improving crystallinity in the network comprising ∼ 10 nm Si-nanocrystallites and contributing optical gap widening, conductivity ascending and that obtained during simultaneous escalation of the deposition rate, promises significant technological impact.

  1. Fatigue crack growth rates of rotor steel at elevated temperatures

    Institute of Scientific and Technical Information of China (English)

    LIU Chang-hai; MA Li-juan; TANG Li-qiang

    2008-01-01

    Low fatigue samples were obtained from the outer edges of rotor steel (30CrlMolV) which had operated under different temperatures conditions.Based on this data,the effects of temperature on fatigue crack growth rates were investigated.This paper presents a derivation of the superposition expression of two natural logarithms governing crack growth rates and also discusses the relationship between a material's constants and temperature.These results can provide experimental and theoretical references for fatigue life design of root steel in steam turbines.

  2. Universality of thermodynamic constants governing biological growth rates.

    Directory of Open Access Journals (Sweden)

    Ross Corkrey

    Full Text Available BACKGROUND: Mathematical models exist that quantify the effect of temperature on poikilotherm growth rate. One family of such models assumes a single rate-limiting 'master reaction' using terms describing the temperature-dependent denaturation of the reaction's enzyme. We consider whether such a model can describe growth in each domain of life. METHODOLOGY/PRINCIPAL FINDINGS: A new model based on this assumption and using a hierarchical Bayesian approach fits simultaneously 95 data sets for temperature-related growth rates of diverse microorganisms from all three domains of life, Bacteria, Archaea and Eukarya. Remarkably, the model produces credible estimates of fundamental thermodynamic parameters describing protein thermal stability predicted over 20 years ago. CONCLUSIONS/SIGNIFICANCE: The analysis lends support to the concept of universal thermodynamic limits to microbial growth rate dictated by protein thermal stability that in turn govern biological rates. This suggests that the thermal stability of proteins is a unifying property in the evolution and adaptation of life on earth. The fundamental nature of this conclusion has importance for many fields of study including microbiology, protein chemistry, thermal biology, and ecological theory including, for example, the influence of the vast microbial biomass and activity in the biosphere that is poorly described in current climate models.

  3. Sea ice growth rates from tide-driven visible banding

    Science.gov (United States)

    Turner, Kate E.; Smith, Inga J.; Tison, Jean-Louis; Verbeke, Véronique; McGuinness, Mark; Ingham, Malcolm; Vennell, Ross; Trodahl, Joe

    2017-06-01

    In this paper, periodic tide-current-driven banding in a sea-ice core is demonstrated as a measure of the growth rate of first-year sea ice at congelation-ice depths. The study was performed on a core from the eastern McMurdo Sound, exploiting the well-characterized tidal pattern at the site. It points the way to a technique for determining early-season ice growth rates from late-season cores, in areas where under ice currents are known to be tidally dominated and the ice is landfast, thus providing data for a time of year when thin ice prevents direct thickness (and therefore growth rate) measurements. The measured results were compared to the growth-versus-depth predicted by a thermodynamic model.Plain Language SummaryIt is currently very difficult to measure sea-ice growth rates, due to the danger of traveling on thin ice early in the growing season. This paper introduces the use of tidal patterns to determine sea-ice growth rates at the end of the growing season, when ice cores can be taken. The technique utilizes the visible light and dark bands that are often present in sea ice near land, and are driven by changes in the tidal current beneath the ice. As well as being important for climate research, this method could contribute to the understanding biological ecosystems within the ice, by providing a method to date depths in an ice core where particular organisms are observed or samples taken.

  4. A generic mechanism for adaptive growth rate regulation.

    Directory of Open Access Journals (Sweden)

    Chikara Furusawa

    2008-01-01

    Full Text Available How can a microorganism adapt to a variety of environmental conditions despite the existence of a limited number of signal transduction mechanisms? We show that for any growing cells whose gene expression fluctuate stochastically, the adaptive cellular state is inevitably selected by noise, even without a specific signal transduction network for it. In general, changes in protein concentration in a cell are given by its synthesis minus dilution and degradation, both of which are proportional to the rate of cell growth. In an adaptive state with a higher growth speed, both terms are large and balanced. Under the presence of noise in gene expression, the adaptive state is less affected by stochasticity since both the synthesis and dilution terms are large, while for a nonadaptive state both the terms are smaller so that cells are easily kicked out of the original state by noise. Hence, escape time from a cellular state and the cellular growth rate are negatively correlated. This leads to a selection of adaptive states with higher growth rates, and model simulations confirm this selection to take place in general. The results suggest a general form of adaptation that has never been brought to light--a process that requires no specific mechanisms for sensory adaptation. The present scheme may help explain a wide range of cellular adaptive responses including the metabolic flux optimization for maximal cell growth.

  5. A generic mechanism for adaptive growth rate regulation.

    Science.gov (United States)

    Furusawa, Chikara; Kaneko, Kunihiko

    2008-01-01

    How can a microorganism adapt to a variety of environmental conditions despite the existence of a limited number of signal transduction mechanisms? We show that for any growing cells whose gene expression fluctuate stochastically, the adaptive cellular state is inevitably selected by noise, even without a specific signal transduction network for it. In general, changes in protein concentration in a cell are given by its synthesis minus dilution and degradation, both of which are proportional to the rate of cell growth. In an adaptive state with a higher growth speed, both terms are large and balanced. Under the presence of noise in gene expression, the adaptive state is less affected by stochasticity since both the synthesis and dilution terms are large, while for a nonadaptive state both the terms are smaller so that cells are easily kicked out of the original state by noise. Hence, escape time from a cellular state and the cellular growth rate are negatively correlated. This leads to a selection of adaptive states with higher growth rates, and model simulations confirm this selection to take place in general. The results suggest a general form of adaptation that has never been brought to light--a process that requires no specific mechanisms for sensory adaptation. The present scheme may help explain a wide range of cellular adaptive responses including the metabolic flux optimization for maximal cell growth.

  6. Growth rates of modern science: A bibliometric analysis

    CERN Document Server

    Bornmann, Lutz

    2014-01-01

    Many studies in information science have looked at the growth of science. In this study, we re-examine the question of the growth of science. To do this we (i) use current data up to publication year 2012 and (ii) analyse it across all disciplines and also separately for the natural sciences and for the medical and health sciences. Furthermore, the data are analysed with an advanced statistical technique (segmented regression analysis) which can identify specific segments with similar growth rates in the history of science. The study is based on two different sets of bibliometric data: (1) The number of publications held as source items in the Web of Science (WoS, Thomson Reuters) per publication year and (2) the number of cited references in the publications of the source items per cited reference year. We have looked at the rate at which science has grown since the mid-1600s. In our analysis we identified three growth phases in the development of science, which each led to growth rates tripling in compariso...

  7. Net Assimilation Rate Determines the Growth Rates of 14 Species of Subtropical Forest Trees.

    Directory of Open Access Journals (Sweden)

    Xuefei Li

    Full Text Available Growth rates are of fundamental importance for plants, as individual size affects myriad ecological processes. We determined the factors that generate variation in RGR among 14 species of trees and shrubs that are abundant in subtropical Chinese forests. We grew seedlings for two years at four light levels in a shade-house experiment. We monitored the growth of every juvenile plant every two weeks. After one and two years, we destructively harvested individuals and measured their functional traits and gas-exchange rates. After calculating individual biomass trajectories, we estimated relative growth rates using nonlinear growth functions. We decomposed the variance in log(RGR to evaluate the relationships of RGR with its components: specific leaf area (SLA, net assimilation rate (NAR and leaf mass ratio (LMR. We found that variation in NAR was the primary determinant of variation in RGR at all light levels, whereas SLA and LMR made smaller contributions. Furthermore, NAR was strongly and positively associated with area-based photosynthetic rate and leaf nitrogen content. Photosynthetic rate and leaf nitrogen concentration can, therefore, be good predictors of growth in woody species.

  8. Measuring the growth rate of structure around cosmic voids

    Science.gov (United States)

    Hawken, A. J.; Michelett, D.; Granett, B.; Iovino, A.; Guzzo, L.

    2016-10-01

    Using an algorithm based on searching for empty spheres we identified 245 voids in the VIMOS Public Extragalactic Redshift Survey (VIPERS). We show how by modelling the anisotropic void-galaxy cross correlation function we can probe the growth rate of structure.

  9. Sales Growth Rate Forecasting Using Improved PSO and SVM

    Directory of Open Access Journals (Sweden)

    Xibin Wang

    2014-01-01

    Full Text Available Accurate forecast of the sales growth rate plays a decisive role in determining the amount of advertising investment. In this study, we present a preclassification and later regression based method optimized by improved particle swarm optimization (IPSO for sales growth rate forecasting. We use support vector machine (SVM as a classification model. The nonlinear relationship in sales growth rate forecasting is efficiently represented by SVM, while IPSO is optimizing the training parameters of SVM. IPSO addresses issues of traditional PSO, such as relapsing into local optimum, slow convergence speed, and low convergence precision in the later evolution. We performed two experiments; firstly, three classic benchmark functions are used to verify the validity of the IPSO algorithm against PSO. Having shown IPSO outperform PSO in convergence speed, precision, and escaping local optima, in our second experiment, we apply IPSO to the proposed model. The sales growth rate forecasting cases are used to testify the forecasting performance of proposed model. According to the requirements and industry knowledge, the sample data was first classified to obtain types of the test samples. Next, the values of the test samples were forecast using the SVM regression algorithm. The experimental results demonstrate that the proposed model has good forecasting performance.

  10. Is the natural rate of growth exogenous?A comment

    Directory of Open Access Journals (Sweden)

    Luciano Boggio

    2002-05-01

    Full Text Available The authors comment a recent paper (Leon-Ledesma and Thirlwall 2000 – from now on LLTin which an interesting issue is raised concerning the notion of the natural rate of growth, first proposed by Sir Roy Harrod (1939.

  11. Controlling protein crystal growth rate by means of temperature

    Energy Technology Data Exchange (ETDEWEB)

    SantamarIa-Holek, I; Gadomski, A [Institute of Mathematics and Physics, University of Technology and Life Sciences, PL-85796 Bydgoszcz (Poland); RubI, J M, E-mail: isholek.fc@gmail.com, E-mail: agad@utp.edu.pl, E-mail: mrubi@ub.edu [Departament de Fisica Fonamental, University of Barcelona, Av. Diagonal 647, E-08028 Barcelona (Spain)

    2011-06-15

    We have proposed a model to analyze the growth kinetics of lysozyme crystals/aggregates under non-isothermal conditions. The model was formulated through an analysis of the entropy production of the growth process which was obtained by taking into account the explicit dependence of the free energy on the temperature. We found that the growth process is coupled with temperature variations, resulting in a novel Soret-type effect. We identified the surface entropy of the crystal/aggregate as a decisive ingredient controlling the behavior of the average growth rate as a function of temperature. The behavior of the Gibbs free energy as a function of temperature is also analyzed. The agreement between theory and experiments is very good in the range of temperatures considered.

  12. Controlling protein crystal growth rate by means of temperature.

    Science.gov (United States)

    Sanamaría-Holek, I; Gadomski, A; Rubí, J M

    2011-06-15

    We have proposed a model to analyze the growth kinetics of lysozyme crystals/aggregates under non-isothermal conditions. The model was formulated through an analysis of the entropy production of the growth process which was obtained by taking into account the explicit dependence of the free energy on the temperature. We found that the growth process is coupled with temperature variations, resulting in a novel Soret-type effect. We identified the surface entropy of the crystal/aggregate as a decisive ingredient controlling the behavior of the average growth rate as a function of temperature. The behavior of the Gibbs free energy as a function of temperature is also analyzed. The agreement between theory and experiments is very good in the range of temperatures considered.

  13. Dependence of calcite growth rate and Sr partitioning on solution stoichiometry: Non-Kossel crystal growth

    NARCIS (Netherlands)

    Nehrke, G.; Reichart, G.-J.; Van Cappellen, P.; Meile, C.; Bijma, J.

    2007-01-01

    Seeded calcite growth experiments were conducted at fixed pH (10.2) and two degrees of supersaturation (Ω = 5, 16), while varying the Ca2+ to CO3 2- solution ratio over several orders of magnitude. The calcite growth rate and the incorporation of Sr in the growing crystals strongly depended on

  14. Proximate causes of adaptive growth rates: growth efficiency variation among latitudinal populations of Rana temporaria.

    Science.gov (United States)

    Lindgren, B; Laurila, A

    2005-07-01

    In ectothermic organisms, declining season length and lower temperature towards higher latitudes often select for latitudinal variation in growth and development. However, the energetic mechanisms underlying this adaptive variation are largely unknown. We investigated growth, food intake and growth efficiency of Rana temporaria tadpoles from eight populations along a 1500 km latitudinal gradient across Sweden. To gain an insight into the mechanisms of adaptation at organ level, we also examined variation in tadpole gut length. The tadpoles were raised at two temperatures (16 and 20 degrees C) in a laboratory common garden experiment. We found increased growth rate towards higher latitudes, regardless of temperature treatment. This increase in growth was not because of a higher food intake rate, but populations from higher latitudes had higher growth efficiency, i.e. they were more efficient at converting ingested food into body mass. Low temperature reduced growth efficiency most strongly in southern populations. Relative gut length increased with latitude, and tadpoles at low temperature tended to have longer guts. However, variation in gut length was not the sole adaptive explanation for increased growth efficiency as latitude and body length still explained significant amounts of variation in growth efficiency. Hence, additional energetic adaptations are probably involved in growth efficiency variation along the latitudinal gradient.

  15. Exchange-Driven Growth with Birth Rate Less Than Death

    Institute of Scientific and Technical Information of China (English)

    LIN Zhen-Quan; KE Jian-Hong; YE Gao-Xiang

    2005-01-01

    We further study the kinetic behavior of the exchange-driven growth with birth and death for the case of birth rate kernel being less than that of death based on the mean-field theory. The symmetric exchange rate kernel is K(k,j) = K'(k,j) = Ikjv, and the birth and death rates are proportional to the aggregate's size. The long time asymptotic behavior of the aggregate size distribution ak(t) is found to obey a much unusual scaling law with an exponentially growing scaling function φ(x) = exp(x).

  16. Simulation of Delamination Propagation in Composites Under High-Cycle Fatigue by Means of Cohesive-Zone Models

    Science.gov (United States)

    Turon, Albert; Costa, Josep; Camanho, Pedro P.; Davila, Carlos G.

    2006-01-01

    A damage model for the simulation of delamination propagation under high-cycle fatigue loading is proposed. The basis for the formulation is a cohesive law that links fracture and damage mechanics to establish the evolution of the damage variable in terms of the crack growth rate dA/dN. The damage state is obtained as a function of the loading conditions as well as the experimentally-determined coefficients of the Paris Law crack propagation rates for the material. It is shown that by using the constitutive fatigue damage model in a structural analysis, experimental results can be reproduced without the need of additional model-specific curve-fitting parameters.

  17. Middle Archean continent formation by crustal delamination

    Science.gov (United States)

    Zegers, Tanja E.; van Keken, Peter E.

    2001-12-01

    The processes that created the first large cratonic areas such as the Pilbara and the Kaapvaal remain poorly understood. Models based on the uniformitarian extrapolation of present-day arc volcanic processes to a hotter early Earth have not adequately explained the observations in these terranes. Here we propose an alternative mechanism for the formation of the earliest continental crust. The formation of continental crust may be achieved by delamination of the lower eclogitic part of an oceanic plateau like protocrust. Such delamination results in uplift, extension, and the production of tonalite, trondhjemite, and granodiorite (TTG) suites as recorded in Middle Archean cratons. The available geologic and geophysical observations in combination with model calculations permit this scenario as an alternative to subduction-based hypotheses.

  18. Fiber Optic Thermal Detection of Composite Delaminations

    Science.gov (United States)

    Wu, Meng-Chou; Winfree, William P.

    2011-01-01

    A recently developed technique is presented for thermographic detection of delaminations in composites by performing temperature measurements with fiber optic Bragg gratings. A single optical fiber with multiple Bragg gratings employed as surface temperature sensors was bonded to the surface of a composite with subsurface defects. The investigated structure was a 10-ply composite specimen with prefabricated delaminations of various sizes and depths. Both during and following the application of a thermal heat flux to the surface, the individual Bragg grating sensors measured the temporal and spatial temperature variations. The data obtained from grating sensors were analyzed with thermal modeling techniques of conventional thermography to reveal particular characteristics of the interested areas. Results were compared and found to be consistent with the calculations using numerical simulation techniques. Also discussed are methods including various heating sources and patterns, and their limitations for performing in-situ structural health monitoring.

  19. Delamination-Indicating Thermal Barrier Coatings

    Science.gov (United States)

    Eldridge, Jeffrey I.

    2007-01-01

    The risk of premature failure of thermal barrier coatings (TBCs), typically composed of yttria-stabilized zirconia (YSZ), compromises the reliability of TBCs used to provide thermal protection for turbine engine components. Unfortunately, TBC delamination proceeds well beneath the TBC surface and cannot be monitored by visible inspection. Nondestructive diagnostic tools that could reliably probe the subsurface damage state of TBCs would alleviate the risk of TBC premature failure by indicating when the TBC needs to be replaced before the level of TBC damage threatens engine performance or safety. To meet this need, a new coating design for thermal barrier coatings (TBCs) that are self-indicating for delamination has been successfully implemented by incorporating a europium-doped luminescent sublayer at the base of a TBC composed of YSZ. The luminescent sublayer has the same YSZ composition as the rest of the TBC except for the addition of low-level europium doping and therefore does not alter TBC performance.

  20. Inferring time derivatives including cell growth rates using Gaussian processes

    Science.gov (United States)

    Swain, Peter S.; Stevenson, Keiran; Leary, Allen; Montano-Gutierrez, Luis F.; Clark, Ivan B. N.; Vogel, Jackie; Pilizota, Teuta

    2016-12-01

    Often the time derivative of a measured variable is of as much interest as the variable itself. For a growing population of biological cells, for example, the population's growth rate is typically more important than its size. Here we introduce a non-parametric method to infer first and second time derivatives as a function of time from time-series data. Our approach is based on Gaussian processes and applies to a wide range of data. In tests, the method is at least as accurate as others, but has several advantages: it estimates errors both in the inference and in any summary statistics, such as lag times, and allows interpolation with the corresponding error estimation. As illustrations, we infer growth rates of microbial cells, the rate of assembly of an amyloid fibril and both the speed and acceleration of two separating spindle pole bodies. Our algorithm should thus be broadly applicable.

  1. Scaling laws in the dynamics of crime growth rate

    Science.gov (United States)

    Alves, Luiz G. A.; Ribeiro, Haroldo V.; Mendes, Renio S.

    2013-06-01

    The increasing number of crimes in areas with large concentrations of people have made cities one of the main sources of violence. Understanding characteristics of how crime rate expands and its relations with the cities size goes beyond an academic question, being a central issue for contemporary society. Here, we characterize and analyze quantitative aspects of murders in the period from 1980 to 2009 in Brazilian cities. We find that the distribution of the annual, biannual and triannual logarithmic homicide growth rates exhibit the same functional form for distinct scales, that is, a scale invariant behavior. We also identify asymptotic power-law decay relations between the standard deviations of these three growth rates and the initial size. Further, we discuss similarities with complex organizations.

  2. Scaling laws in the dynamics of crime growth rate

    CERN Document Server

    Alves, Luiz Gustavo de Andrade; Mendes, Renio dos Santos

    2013-01-01

    The increasing number of crimes in areas with large concentrations of people have made cities one of the main source of violence. Understanding characteristics of how crime rate expands and its relations with the cities size goes beyond an academic question, being a central issue for the contemporary society. Here, we characterize and analyze quantitative aspects of murders in the period from 1980 to 2009 in Brazilian cities. We find that the distribution of the annual, biannual and triannual logarithmic homicide growth rates exhibit the same functional form for distinct scales, that is, a scale invariant behaviour. We also identify asymptotic power-law decay relations between the standard deviations of these three growth rates and the initial size. Further, we discuss similarities with complex organizations.

  3. Protein Degradation Rate in Arabidopsis thaliana Leaf Growth and Development.

    Science.gov (United States)

    Li, Lei; Nelson, Clark J; Trösch, Josua; Castleden, Ian; Huang, Shaobai; Millar, A Harvey

    2017-02-01

    We applied (15)N labeling approaches to leaves of the Arabidopsis thaliana rosette to characterize their protein degradation rate and understand its determinants. The progressive labeling of new peptides with (15)N and measuring the decrease in the abundance of >60,000 existing peptides over time allowed us to define the degradation rate of 1228 proteins in vivo. We show that Arabidopsis protein half-lives vary from several hours to several months based on the exponential constant of the decay rate for each protein. This rate was calculated from the relative isotope abundance of each peptide and the fold change in protein abundance during growth. Protein complex membership and specific protein domains were found to be strong predictors of degradation rate, while N-end amino acid, hydrophobicity, or aggregation propensity of proteins were not. We discovered rapidly degrading subunits in a variety of protein complexes in plastids and identified the set of plant proteins whose degradation rate changed in different leaves of the rosette and correlated with leaf growth rate. From this information, we have calculated the protein turnover energy costs in different leaves and their key determinants within the proteome.

  4. Percieved Relationship between Exchange Rate, Interest Rate and Economic Growth in Nigeria: 1970-2010

    Directory of Open Access Journals (Sweden)

    S. A. J Obansa

    2013-07-01

    Full Text Available This study was specifically embarked upon to establish empirically the relationship exiting among Exchange rate, Interest rate and economic growth in Nigerian economy over the period of 1970-2010. Fundamentally, the period of the study was fractured into two prominent distinctions of economic era - the regulation era and the deregulation era. The study adopted vector auto- regression (VAR technique, with specific emphasis on Impulse Response factor and the Forecast Error Variance Decomposition. The result indicated that Exchange rate had a stronger impact on Economic growth than Interest rate. Particularly, Interest rate impact was found to be positive but however declined as the time horizon increased. It had a little impact on Economic growth in the period of regulation than in the deregulation era. The conclusion arising from the study shows that Exchange rate liberalization was good to Nigerian Economy as it promotes Economic growth. Interest rate liberalization on the other hand does not make an appreciable impact on the Economic growth as it undermines investment drive. The paper therefore recommends that Interest rate liberalization and deregulation should be replaced with the policy of Interest rate regulation as obtained in the 1970s and early 1980s. Normal 0 false false false EN-US X-NONE AR-SA /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; text-align:justify; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;}

  5. Fatigue crack growth rate test using a frequency sweep method

    Institute of Scientific and Technical Information of China (English)

    Xun ZHOU; Xiao-li YU

    2008-01-01

    Fatigue crack propagation characteristics of a diesel engine crankshaft are studied by measuring the fatigue crack growth rate using a frequency sweep method on a resonant fatigue test rig. Based on the phenomenon that the system frequency will change when the crack becomes large, this method can be directly applied to a complex component or structure. Finite element analyses (FEAs) are performed to calibrate the relation between the frequency change and the crack size, and to obtain the natural frequency of the test rig and the stress intensity factor (SIF) of growing cracks. The crack growth rate i.e. da/dN-AK of each crack size is obtained by combining the testing-time monitored data and FEA results. The results show that the crack growth rate of engine crankshaft, which is a component with complex geometry and special surface treatment, is quite different from that of a pure material. There is an apparent turning point in the Paris's crack partition. The cause of the fatigue crack growth is also dis-cussed.

  6. DELAMINATION FORMATION AND DELAMINATION PROPAGATION OF COMPOSITE LAMINATES UNDER COMPRESSIVE FATIGUE LOADING

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Fatigue tests of the smooth composite laminates and the notched composite laminates under compressive cyclic loading have been carried out. The damage mechanism is discussed and analyzed. Damage evolution is monitored using stiffness decay. From these tests, it is found that the initial delamination occurs at the free boundary of smooth specimens, or the notch boundary of notched specimens, subjected to the compression-compression cyclic load. A point of view in relation to two-phases of compression fatigue delamination of composites is proposed, namely, compression-compression delamination consists of the delamination formation phase and the delamination propagation, and there is a "damage transition point" to separate this two-phases. Furthermore, an empirical modulus degradation formula and its parameters fitting method are presented. According to the test data handling results, it is shown that this formula is univocal and can fit the test data conveniently. In addition, two kinds of new anti-buckling devices are designed for these tests. At last, the E-N curves, the D-N curves and the S-N curve of the smooth carbon fiber reinforced composite laminates of T300/648C are determined to predict the fatigue life of the notched composite laminate. And the E-N curve of the notched specimens at the given load ratio R=10 and minimum load P min=-0.45 kN is also measured to verify the estimated result of fatigue life.

  7. Compressive strength of delaminated aerospace composites.

    Science.gov (United States)

    Butler, Richard; Rhead, Andrew T; Liu, Wenli; Kontis, Nikolaos

    2012-04-28

    An efficient analytical model is described which predicts the value of compressive strain below which buckle-driven propagation of delaminations in aerospace composites will not occur. An extension of this efficient strip model which accounts for propagation transverse to the direction of applied compression is derived. In order to provide validation for the strip model a number of laminates were artificially delaminated producing a range of thin anisotropic sub-laminates made up of 0°, ±45° and 90° plies that displayed varied buckling and delamination propagation phenomena. These laminates were subsequently subject to experimental compression testing and nonlinear finite element analysis (FEA) using cohesive elements. Comparison of strip model results with those from experiments indicates that the model can conservatively predict the strain at which propagation occurs to within 10 per cent of experimental values provided (i) the thin-film assumption made in the modelling methodology holds and (ii) full elastic coupling effects do not play a significant role in the post-buckling of the sub-laminate. With such provision, the model was more accurate and produced fewer non-conservative results than FEA. The accuracy and efficiency of the model make it well suited to application in optimum ply-stacking algorithms to maximize laminate strength.

  8. THE INFLUENCE OF THE ECONOMIC GROWTH ON THE BIRTH RATE

    Directory of Open Access Journals (Sweden)

    SAVU MIHAELA

    2013-02-01

    Full Text Available The changes occurred over time in the population have effects on the economy, especially the reductions in thebirth rate which may lead to disturbances in the population structure. The relationship between the economic growthand the birth rate in Romania is analysed over an 11-year period, in order to see its intensity. The presentation of theevolution of the gross domestic product and of the birth rate is completed by the calculation of the Spearmancoefficient for determining the intensity of the relationship between the two indicators. The decrease of the birth rate isdetermined, to a modest extent, by the economic growth, with a wide range of factors that influence it. In this situation,the establishment and implementation of a birth rate recovery strategy is highly necessary to reduce the imbalancecreated in the population structure.

  9. Monitoring Delamination of Plasma-Sprayed Thermal Barrier Coatings by Reflectance-Enhanced Luminescence

    Science.gov (United States)

    Eldridge, Jeffrey I.; Bencic, Timothy J.

    2006-01-01

    Highly scattering plasma-sprayed thermal barrier coatings (TBCs) present a challenge for optical diagnostic methods to monitor TBC delamination because scattering attenuates light transmitted through the TBC and usually degrades contrast between attached and delaminated regions of the TBC. This paper presents a new approach where reflectance-enhanced luminescence from a luminescent sublayer incorporated along the bottom of the TBC is used to identify regions of TBC delamination. Because of the higher survival rate of luminescence reflecting off the back surface of a delaminated TBC, the strong scattering exhibited by plasma-sprayed TBCs actually accentuates contrast between attached and delaminated regions by making it more likely that multiple reflections of luminescence off the back surface occur before exiting the top surface of the TBC. A freestanding coating containing sections designed to model an attached or delaminated TBC was prepared by depositing a luminescent Eu-doped or Er-doped yttria-stabilized zirconia (YSZ) luminescent layer below a plasma-sprayed undoped YSZ layer and utilizing a NiCr backing layer to represent an attached substrate. For specimens with a Eu-doped YSZ luminescent sublayer, luminescence intensity maps showed excellent contrast between unbacked and NiCr-backed sections even at a plasma-sprayed overlayer thickness of 300 m. Discernable contrast between unbacked and NiCr-backed sections was not observed for specimens with a Er-doped YSZ luminescent sublayer because luminescence from Er impurities in the undoped YSZ layer overwhelmed luminescence originating form the Er-doped YSZ sublayer.

  10. FINGERNAIL GROWTH RATE IN A NORMAL CHINESE POPULATION

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Objective To investigate fingernail growth rate (FNGR) role in the physiological or pathological status of the fingernails in normal Chinese population. Methods The FNGR was measured with vernier caliper. The data of 1 595 fingernails from 208 normal Chinese subjects (including 96 men and 112 women; age ranging from 14 to 78 years) were analyzed. Results The average FNGR was (0.104±0.027) mm per day. Higher growth rates were observed in males than in females, in the young individuals than in the old individuals, in summer than in winter, and in the right hand than in the left hand, respectively. The FNGR differed among fingernails and decreased in order of precedence: middle fingernails, index fingernails or ring fingernails, thumb and little fingernails. Conclusion FNGR was significantly associated with age, gender and temperature. Different fingernail grew at an individual speed.

  11. Flute growth rate of plasma jet in mirror machine

    Science.gov (United States)

    Be'ery, I.; Seemann, O.; Goldstein, G.; Fisher, A.; Ron, A.

    2014-02-01

    The evolution of flute instability in a cold, high-density hydrogen plasma jet, injected into a mirror machine, is studied. The experiment was designed to minimize the interaction of the plasma with the walls, thus bringing it close to the ideal magnetic Rayleigh-Taylor instability conditions. The modal growth rate was measured in various settings to demonstrate the effects of the finite Larmor radius, Bohm diffusion, conductive limiter, biased limiter and neutral background gas. In this paper we will demonstrate that lowering the magnetic field increases stability, as does the insertion of a conducting ring. However, if the ring is biased, the stability is reduced due to inhomogeneous coupling between the plasma and the limiter. It was also found that heavy background gas dramatically reduces the flute instability growth rate.

  12. A rare large right atrial myxoma with rapid growth rate.

    Science.gov (United States)

    Kelly, Shawn C; Steffen, Kelly; Stys, Adam T

    2014-10-01

    Atrial myxomas are the most common benign intracavitary cardiac neoplasms. They most frequently occur in the left atrium. Right atrial tumors are rare, comprising 20 percent of myxomas achieving an incidence of 0.02 percent. Due to their rarity, right atrial tumor development and associated clinical symptoms has not been well described. The classical clinical triad for the presentation of left atrial myxomas--heart failure, embolic events, and constitutional symptoms--may not be applicable to right sided tumors. Also, natural development of myxoma is not well described, as surgical resection is the common practice. Previously ascribed growth rates of myxomas refer mostly to left atrial ones, as right atrial tumors are rare. We present a case of right atrial myxoma with growth rates exceeding those previously described.

  13. Slow growth rates of Amazonian trees: Consequences for carbon cycling

    Science.gov (United States)

    Vieira, Simone; Trumbore, Susan; Camargo, Plinio B.; Selhorst, Diogo; Chambers, Jeffrey Q.; Higuchi, Niro; Martinelli, Luiz Antonio

    2005-01-01

    Quantifying age structure and tree growth rate of Amazonian forests is essential for understanding their role in the carbon cycle. Here, we use radiocarbon dating and direct measurement of diameter increment to document unexpectedly slow growth rates for trees from three locations spanning the Brazilian Amazon basin. Central Amazon trees, averaging only ≈1mm/year diameter increment, grow half as fast as those from areas with more seasonal rainfall to the east and west. Slow growth rates mean that trees can attain great ages; across our sites we estimate 17-50% of trees with diameter >10 cm have ages exceeding 300 years. Whereas a few emergent trees that make up a large portion of the biomass grow faster, small trees that are more abundant grow slowly and attain ages of hundreds of years. The mean age of carbon in living trees (60-110 years) is within the range of or slightly longer than the mean residence time calculated from C inventory divided by annual C allocation to wood growth (40-100 years). Faster C turnover is observed in stands with overall higher rates of diameter increment and a larger fraction of the biomass in large, fast-growing trees. As a consequence, forests can recover biomass relatively quickly after disturbance, whereas recovering species composition may take many centuries. Carbon cycle models that apply a single turnover time for carbon in forest biomass do not account for variations in life strategy and therefore may overestimate the carbon sequestration potential of Amazon forests. PMID:16339903

  14. Vibration of composite beams with two overlapping delaminations

    Institute of Scientific and Technical Information of China (English)

    Christian N. Della; Dongwei Shu; Yapu Zhao

    2005-01-01

    Delaminations in composite laminates may develop from small cracks due to fabrication and impact loading, or from places of high stress concentration. The locations of the delaminations are not determinate. In this research, an analytical solution for the free vibration of a composite beam with two overlapping delaminations is presented. The delaminated beam is analyzed as seven interconnected beams using the delaminations as their boundaries. The continuity and equilibrium conditions are satisfied between the adjoining regions of the beams. Classical beam theory is applied to each of the beams. Complex vibration behaviors emerge for different sizes and locations of the delaminations. Comparison with analytical results reported in the literature verifies the validity of the present solution.

  15. Impact of increased flow rate on specific growth rate of juvenile turbot (Scophthalmus maximus, Rafinesque 1810)

    NARCIS (Netherlands)

    Schram, E.; Verdegem, M.C.J.; Widjaja, R.T.O.B.H.; Kloet, C.J.; Foss, A.; Schelvis-Smit, A.A.M.

    2009-01-01

    The effect of flow rate on growth was investigated in juvenile turbot. Fish with a mean (SD) initial weight of 102 (10.4) g were reared at 6 different flow rates, equaling 1, 2, 3, 4, 6 or 8 tank volumes/h in 196 L tanks during 29 days at 18 ± 0.29 °C, a salinity of 18.0 ± 0.77¿ and a pH ranging

  16. Effect of growth rate and body mass on resting metabolic rate in galliform chicks

    NARCIS (Netherlands)

    Dietz, MW; Drent, RH

    1997-01-01

    In this study, we asked whether within-species variation in chick resting metabolic rate was related to variation in growth and whether this relationship changed during development in three galliform species (turkey, Meleagris gallopavo, guinea fowl, Numida meleagris, and Japanese quail, Coturnix co

  17. Development and Applications of Benchmark Examples for Static Delamination Propagation Predictions

    Science.gov (United States)

    Krueger, Ronald

    2013-01-01

    The development and application of benchmark examples for the assessment of quasistatic delamination propagation capabilities was demonstrated for ANSYS (TradeMark) and Abaqus/Standard (TradeMark). The examples selected were based on finite element models of Double Cantilever Beam (DCB) and Mixed-Mode Bending (MMB) specimens. First, quasi-static benchmark results were created based on an approach developed previously. Second, the delamination was allowed to propagate under quasi-static loading from its initial location using the automated procedure implemented in ANSYS (TradeMark) and Abaqus/Standard (TradeMark). Input control parameters were varied to study the effect on the computed delamination propagation. Overall, the benchmarking procedure proved valuable by highlighting the issues associated with choosing the appropriate input parameters for the VCCT implementations in ANSYS® and Abaqus/Standard®. However, further assessment for mixed-mode delamination fatigue onset and growth is required. Additionally studies should include the assessment of the propagation capabilities in more complex specimens and on a structural level.

  18. FINITE ELEMENT IMPLEMENTATION OF DELAMINATION IN COMPOSITE PLATES

    Directory of Open Access Journals (Sweden)

    Milan Žmindák

    2012-12-01

    Full Text Available Modelling of composite structures by finite element (FE codes to effectively model certain critical failure modes such as delamination is limited. Previous efforts to model delamination and debonding failure modes using FE codes have typically relied on ad hoc failure criteria and quasi-static fracture data. Improvements to these modelling procedures can be made by using an approach based on fracture mechanics. A study of modelling delamination using the finite element code ANSYS was conducted. This investigation demonstrates the modelling of composites through improved delamination modelling. Further developments to this approach may be improved.

  19. Sensing delamination in epoxy encapsulant systems with fiber Bragg gratings

    Science.gov (United States)

    Jones, Brad H.; Rohr, Garth D.; Kaczmarowski, Amy K.

    2016-05-01

    Fiber Bragg gratings (FBGs) are well-suited for embedded sensing of interfacial phenomena in materials systems, due to the sensitivity of their spectral response to locally non-uniform strain fields. Over the last 15 years, FBGs have been successfully employed to sense delamination at interfaces, with a clear emphasis on planar events induced by transverse cracks in fiber-reinforced plastic laminates. We have built upon this work by utilizing FBGs to detect circular delamination events at the interface between epoxy films and alumina substrates. Two different delamination processes are examined, based on stress relief induced by indentation of the epoxy film or by cooling to low temperature. We have characterized the spectral response pre- and post-delamination for both simple and chirped FBGs as a function of delamination size. We show that delamination is readily detected by the evolution of a non-uniform strain distribution along the fiber axis that persists after the stressing condition is removed. These residual strain distributions differ substantially between the delamination processes, with indentation and cooling producing predominantly tensile and compressive strain, respectively, that are well-captured by Gaussian profiles. More importantly, we observe a strong correlation between spectrally-derived measurements, such as spectral widths, and delamination size. Our results further highlight the unique capabilities of FBGs as diagnostic tools for sensing delamination in materials systems.

  20. Guided Wave Delamination Detection and Quantification With Wavefield Data Analysis

    Science.gov (United States)

    Tian, Zhenhua; Campbell Leckey, Cara A.; Seebo, Jeffrey P.; Yu, Lingyu

    2014-01-01

    Unexpected damage can occur in aerospace composites due to impact events or material stress during off-nominal loading events. In particular, laminated composites are susceptible to delamination damage due to weak transverse tensile and inter-laminar shear strengths. Developments of reliable and quantitative techniques to detect delamination damage in laminated composites are imperative for safe and functional optimally-designed next-generation composite structures. In this paper, we investigate guided wave interactions with delamination damage and develop quantification algorithms by using wavefield data analysis. The trapped guided waves in the delamination region are observed from the wavefield data and further quantitatively interpreted by using different wavenumber analysis methods. The frequency-wavenumber representation of the wavefield shows that new wavenumbers are present and correlate to trapped waves in the damage region. These new wavenumbers are used to detect and quantify the delamination damage through the wavenumber analysis, which can show how the wavenumber changes as a function of wave propagation distance. The location and spatial duration of the new wavenumbers can be identified, providing a useful means not only for detecting the presence of delamination damage but also allowing for estimation of the delamination size. Our method has been applied to detect and quantify real delamination damage with complex geometry (grown using a quasi-static indentation technique). The detection and quantification results show the location, size, and shape of the delamination damage.

  1. Simulation Methods for High-Cycle Fatigue-Driven Delamination using Cohesive Zone Models - Fundamental Behavior and Benchmark Studies

    DEFF Research Database (Denmark)

    Bak, Brian Lau Verndal; Lindgaard, Esben; Turon, A.;

    2015-01-01

    A novel computational method for simulating fatigue-driven delamination cracks in composite laminated structures under cyclic loading based on a cohesive zone model [2] and new benchmark studies with four other comparable methods [3-6] are presented. The benchmark studies describe and compare...... the traction-separation response in the cohesive zone and the transition phase from quasistatic to fatigue loading for each method. Furthermore, the accuracy of the predicted crack growth rate is studied and compared for each method. It is shown that the method described in [2] is significantly more accurate...... than the other methods [3-6]. Finally, studies are presented of the dependency and sensitivity to the change in different quasi-static material parameters and model specific fitting parameters. It is shown that all the methods except [2] rely on different parameters which are not possible to determine...

  2. Bacterial growth on surfaces: Automated image analysis for quantification of growth rate-related parameters

    DEFF Research Database (Denmark)

    Møller, S.; Sternberg, Claus; Poulsen, L. K.

    1995-01-01

    species-specific hybridizations with fluorescence-labelled ribosomal probes to estimate the single-cell concentration of RNA. By automated analysis of digitized images of stained cells, we determined four independent growth rate-related parameters: cellular RNA and DNA contents, cell volume......, and the frequency of dividing cells in a cell population. These parameters were used to compare physiological states of liquid-suspended and surfacegrowing Pseudomonas putida KT2442 in chemostat cultures. The major finding is that the correlation between substrate availability and cellular growth rate found...

  3. BEM solution of delamination problems using an interface damage and plasticity model

    CERN Document Server

    Panagiotopoulos, C G; Roubicek, T

    2012-01-01

    The problem of quasistatic and rate-independent evolution of elastic-plastic-brittle delamination at small strains is considered. Delamination processes for linear elastic bodies glued by an adhesive to each other or to a rigid outer surface are studied. The energy amounts dissipated in fracture Mode I (opening) and Mode II (shear) at an interface may be different. A concept of internal parameters is used here on the delaminating interfaces, involving a couple of scalar damage variable and a plastic tangential slip with kinematic-type hardening. The so-called energetic solution concept is employed. An inelastic process at an interface is devised in such a way that the dissipated energy depends only on the rates of internal parameters and therefore the model is associative. A fully implicit time discretization is combined with a spatial discretization of elastic bodies by the BEM to solve the delamination problem. The BEM is used in the solution of the respective boundary value problems, for each subdomain sep...

  4. Growth-rate periodicity of Streptomyces levoris during space flight

    Science.gov (United States)

    Rogers, T. D.; Brower, M. E.; Taylor, G. R.

    1977-01-01

    Streptomyces levoris provides a suitable biological test system to investigate the effects of space flight on the rhythms of vegetative and spore phase characteristics of both growth-rate periodicity and culture morphology during the pre-, in-, and post-flight periods of the Apollo-Soyuz Test Project. The objectives of the American participation were to study the effects of space flight on the biorhythms of Streptomyces levoris based on a comparison of the growth-rate periodicity of the vegetative and spore phase within each culture, to examine the possible alteration of spore morphology and development by SEM, and to compare the effects of a 12-hr phase shift on the periodic growth characteristics of this microorganism in cultures which were exchanged during the joint activities of the space flight. No uniform differences in the biorhythm of Streptomyces levoris during space flight were observed. It appears that the single most variable factor related to the experiment was the lack of temperature control for the space-flight specimens.

  5. Prediction of the growth rates of VDEs in JET

    Science.gov (United States)

    Albanese, R.; Mattei, M.; Villone, F.

    2004-09-01

    In this paper we show that the effect of the saddle currents in the rigid sectors slows down the vertical instability of JET elongated plasmas with respect to estimates based on pure axisymmetric models. This, together with an accurate description of the passive structures, significantly improves the agreement between the theoretical predictions and the experimental results. Linearized models taking into account the three-dimensional effects of the eddy currents have been applied to various JET pulses; the growth rates have been estimated within an accuracy of less than 5% for plasmas with a growth time longer than 2 ms. This model can be used for JET and extended to ITER-FEAT to provide a reliable test bed for assessing the performance of the vertical control system and obtain an estimate of the loads on the structures during vertical displacement events (VDEs) and plasma disruptions.

  6. Empirical formulas for description of the fatigue crack growth rate

    Energy Technology Data Exchange (ETDEWEB)

    Rozumek, D. [Opole University of Technology, Faculty of Mechanical Engineering, Opole (Poland)

    2010-02-15

    The paper presents the test results obtained for fatigue crack growth in flat specimens subjected to bending. The tests were conducted for different loading amplitudes and different load ratios using the {delta}J parameter. Accuracy of description of the fatigue crack growth rate was tested with use of different empirical formulas. One-side restrained specimens made of 10HNAP steel were tested. In each tested specimen, there was the external notch 5 mm in depth, and the notch rounding radius was {rho}=0.2 mm. The tests were carried out at the fatigue test stand MZGS-100 under loading frequency 28.8 Hz. It has been found that the obtained results depend on the applied empirical formula. (Abstract Copyright [2010], Wiley Periodicals, Inc.)

  7. Global Changes And Tree Growth Rate In The Amazon Forest

    Science.gov (United States)

    Camargo, P. B.; Vieira, S. A.; Trumbore, S. E.

    2003-12-01

    A better understanding of the variations in the dynamics and structure of trees in tropical forests is necessary for predicting the potential for these ecosystems to lose or store carbon. In general, tropical forests have been treated as if all trees behaved similarly, and little is known about how forests vary across the large extent of the Amazon basin. Our data show large differences in forest structure, biomass, and tree growth rates among plots under study in three locations in Brazil: ZF-2 Bionte/Jacaranda plots \\(Manaus\\), Catuaba Reserve \\(Rio Branco\\), and Tapaj¢s National Forest \\(Santarém\\). These locations span an east-west transect of the Amazon basin with different dry-season lengths. The number of stems >10cm diameter and stocks of C in aboveground biomass are the highest in Manaus \\(626ha-1, 180.1Mg.C.ha-1\\), than Rio Branco \\(466ha-1, 122.1Mg.C.ha-1\\) or Santarém \\(460ha-1, 140.6Mg.C.ha-1\\). Estimates of mean annual accumulation of C ranged from 1.6 \\(Manaus\\) and 2.5 \\(Rio Branco\\) to 2.8Mg.C.ha-1.yr-1 \\(Santarém\\). Trees in the 10-30cm diameter-size showed the highest accumulation of C \\(38%, 55%, and 56% - Manaus, Rio Branco, and Santarém, respectively\\). Our results showed marked seasonal growth, with the highest growth rates in the wet-season and the lowest growth rates in the dry-season. This effect was most evident for trees with diameter >50cm. The comparison of the three areas investigated suggests that forests experiencing a longer dry-season have larger annual diameter growth increments for individual trees. Tree average age was larger in Manaus where the increment was smaller. In all the three areas it was found specimens with DBH smaller than 30cm, but with ages over 200 years. It was found a specimen of 17 cm of DBH and age of 920 years. The fact that small trees can reach old ages may alter the scope of the present forest management planning whose focus is tree species of economical interest and the time the

  8. [Mexico City: a new course in its growth rate].

    Science.gov (United States)

    Partida Bush, V

    1994-01-01

    Mexico City, like other large cities, has entered a phase of slower growth which has led to revision in the projected future population of the metropolitan area. Rapid and sustained growth at a rate of over 5% annually between 1921 and 1970 justified the UN projection of 31 million inhabitants by the year 2000. National projections were more conservative. If the goals of the National Population Council for internal migration were met, the population would be 23.4 million. The 1980 census showed that the population was slightly under 13 million, substantially below the 15 million projected for that year. The revised UN projection was 24.4 million in 2000, which would make Mexico City the world's largest urban conglomeration. The 1990 census indicated a population of 15 million in the Mexico City metropolitan area. The intense movement to Mexico City over the course of the twentieth century was due to the concentration of political, industrial, and financial activity, urban services and infrastructure, and public and private health, educational, and cultural facilities in the capital on the one hand, and the backwardness of many of the nation's other regions on the other. The abrupt decline in Mexico City's growth rate after 1970 was due to both fertility decline and decline in in-migration. The rate of out-migration has also increased. Government policies calling for decentralization of public and private enterprises and the near prohibition of new industries in the Valley of Mexico, together with growing problems in the quality of life, environment, and public safety in Mexico City have been factors in the slowing expansion. New projections based on existing trends are for a population of 17 million in the year 2000 and 18.4 million in 2010.

  9. The growth rate of symplectic homology and affine varieties

    CERN Document Server

    McLean, Mark

    2010-01-01

    We will show that the cotangent bundle of an integrally hyperbolic manifold is not symplectomorphic to any smooth affine variety. We will also show that the unit cotangent bundle of such a manifold is not Stein fillable by a Stein domain whose completion is symplectomorphic to a smooth affine variety. For instance, these results hold when our manifolds are simply connected with at least one Betti number greater than the corresponding Betti number of the n torus. We use an invariant called the growth rate of symplectic homology to prove this result.

  10. Bacterial growth on surfaces: Automated image analysis for quantification of growth rate-related parameters

    DEFF Research Database (Denmark)

    Møller, S.; Sternberg, Claus; Poulsen, L. K.

    1995-01-01

    A fast routine method for estimating bacterial cell growth rates by using the metachromatic dye acridine orange is described. The method allows simultaneous estimates of cellular RNA and DNA contents of single cells. Acridine orange staining can be used as a nonspecific supplement to quantitative...

  11. Nanotube attachment for prevention of interfacial delamination

    Science.gov (United States)

    Mukhopadhyay, Sharmila M.; Karumuri, Anil K.

    2010-09-01

    A new approach to suppressing interfacial delamination in composites has been investigated. It involves growing strongly attached nanotubes on the surface of the core phase prior to matrix infiltration. Unusually durable interfaces between epoxy and graphite have been demonstrated using this technique. Two types of graphitic core materials have been studied: complex cellular foams having open-interconnected porosity and highly oriented pyrolitic graphite (HOPG) providing a model flat interface. When untreated foam is infiltrated with epoxy, the resulting composite is brittle, and shatters before 10% compression. However, when carbon nanotubes (CNTs) are grown on the foam prior to epoxy infiltration, the specimen becomes pliable, and visibly flattens out rather than fracturing. Model studies on a flat graphite-epoxy interface were performed by joining two HOPG specimens with a thin layer of epoxy, and testing the flexural response of the 'seam' using the three-point bend test. The untreated HOPG sandwich fails easily, whereas nanotube-attached HOPG sandwich shows an over three times increase in flexural load-carrying capacity, close to that of seamless monolithic graphite having identical dimensions. Microscopic evaluations of fractured interfaces indicate that, in all geometries, CNT grafting prevents delamination at the graphite-epoxy interface, and forces any crack(s) to propagate through the graphitic phase. This added inter-laminar strength and toughness can be related to the hierarchical morphology of the interface created by CNT attachment, and unprecedented composite structures can be envisioned.

  12. Female promiscuity and maternally dependent offspring growth rates in mammals.

    Science.gov (United States)

    Garratt, Michael; Brooks, Robert C; Lemaître, Jean-François; Gaillard, Jean-Michel

    2014-04-01

    Conflicts between family members are expected to influence the duration and intensity of parental care. In mammals, the majority of this care occurs as resource transfer from mothers to offspring during gestation and lactation. Mating systems can have a strong influence on the severity of familial conflict--where female promiscuity is prevalent, conflict is expected to be higher between family members, causing offspring to demand more resources. If offspring are capable of manipulating their mothers and receive resources in proportion to their demands, resource transfer should increase with elevated promiscuity. We tested this prediction, unexplored across mammals, using a comparative approach. The total durations of gestation and lactation were not related to testes mass, a reliable proxy of female promiscuity across taxa. Offspring growth during gestation, however, and weaning mass, were positively correlated with testes mass, suggesting that offspring gain resources from their mothers at faster rates when familial conflict is greater. During gestation, the relationship between offspring growth and testes mass was also related to placenta morphology, with a stronger relationship between testes mass and growth observed in species with a less invasive placenta. Familial conflict could have a pervasive influence on patterns of parental care in mammals. © 2013 The Author(s). Evolution © 2013 The Society for the Study of Evolution.

  13. Examining structural breaks and growth rates in international health expenditures.

    Science.gov (United States)

    Narayan, Paresh Kumar

    2006-09-01

    Over the last decade, there has been a growing interest in examining health expenditures. In this paper, we study the behaviour of health expenditures in the G3 countries (USA, the UK, and Japan) and three European countries (the UK, Switzerland and Spain) over the period 1960-2000 from a different perspective, in that we examine: (1) whether there is a common structural break in health expenditures across the G3 and European countries; (2) whether structural breaks have slowed down health expenditure growth rates in these countries or vice versa. Our main findings are that: (1) health expenditures share a common break in both bivariate and trivariate cases, and structural breaks and break intervals suggest that either one or a combination of events (second oil price shock, the 1987 stock market crash and/or recessions) have contributed to the commonality of break in health expenditures in the G3, while the oil price shocks have been instrumental in the commonality of breaks for the European countries; (2) except for the UK, structural breaks have slowed down growth rates in health expenditures for the USA, Japan, Switzerland and Spain.

  14. Standard test method for measurement of fatigue crack growth rates

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2015-01-01

    1.1 This test method covers the determination of fatigue crack growth rates from near-threshold to Kmax controlled instability. Results are expressed in terms of the crack-tip stress-intensity factor range (ΔK), defined by the theory of linear elasticity. 1.2 Several different test procedures are provided, the optimum test procedure being primarily dependent on the magnitude of the fatigue crack growth rate to be measured. 1.3 Materials that can be tested by this test method are not limited by thickness or by strength so long as specimens are of sufficient thickness to preclude buckling and of sufficient planar size to remain predominantly elastic during testing. 1.4 A range of specimen sizes with proportional planar dimensions is provided, but size is variable to be adjusted for yield strength and applied force. Specimen thickness may be varied independent of planar size. 1.5 The details of the various specimens and test configurations are shown in Annex A1-Annex A3. Specimen configurations other than t...

  15. Buckling-driven Delamination in Layered Spherical Shells

    DEFF Research Database (Denmark)

    Sørensen, Kim Dalsten; Jensen, Henrik Myhre

    2008-01-01

    An analysis of buckling-driven delamination of a thin film on a spherical substrate has been carried out. The effects of the substrate having a double curvature compared to previous studies of delamination on cylindrical substrates turn out to be non-trivial: In addition to the effect of the shap...

  16. Gas permeation and temperature effects in laser-induced delamination

    NARCIS (Netherlands)

    Fedorov, Alexander; Vellinga, Willem-Pier; De Hosson, Jeff

    Laser-induced delamination (LID) is a technique aimed at measuring the work of adhesion of thin polymer coatings on metal substrates. A laser Pulse is used to create a blister that initiates delamination of the film under pressure. The stress fields in the blister wall and the work of adhesion of

  17. GROWTH RATE DISPERSION (GRD OF THE (010 FACE OF BORAX CRYSTALS IN FLOWING SOLUTION

    Directory of Open Access Journals (Sweden)

    Suharso Suharso

    2010-06-01

    Full Text Available The growth rates of borax crystals from aqueous solutions in the (010 direction at various flow rates were measured. The observed variations of the growth rate can be represented by a normal distribution.  It was found that there is no correlation between growth rate distribution and solution flow under these experimental conditions.   Keywords: Growth rate dispersion (GRD, borax, flow rate

  18. Perspectives on massive coral growth rates in a changing ocean.

    Science.gov (United States)

    Lough, Janice M; Cantin, Neal E

    2014-06-01

    The tropical ocean environment is changing at an unprecedented rate, with warming and severe tropical cyclones creating obvious impacts to coral reefs within the last few decades and projections of acidification raising concerns for the future of these iconic and economically important ecosystems. Documenting variability and detecting change in global and regional climate relies upon high-quality observational records of climate variables supplemented, prior to the mid-19th century, with reconstructions from various sources of proxy climate information. Here we review how annual density banding patterns that are recorded in the skeletons of massive reef-building corals have been used to document environmental change and impacts within coral reefs. Massive corals provide a historical perspective of continuous calcification processes that pre-date most ecological observations of coral reefs. High-density stress bands, abrupt declines in annual linear extension, and evidence of partial mortality within the skeletal growth record reveal signatures of catastrophic stress events that have recently been attributed to mass bleaching events caused by unprecedented thermal stress. Comparison of recent trends in annual calcification with century-scale baseline calcification rates reveals that the frequency of growth anomalies has increased since the late 1990s throughout most of the world's coral reef ecosystems. Continuous coral growth histories provide valuable retrospective information on the coral response to environmental change and the consequences of anthropogenic climate change. Co-ordinated efforts to synthesize and combine global calcification histories will greatly enhance our understanding of current calcification responses to a changing ocean. © 2014 Marine Biological Laboratory.

  19. Volumetric characterization of delamination fields via angle longitudinal wave ultrasound

    Science.gov (United States)

    Wertz, John; Wallentine, Sarah; Welter, John; Dierken, Josiah; Aldrin, John

    2017-02-01

    The volumetric characterization of delaminations necessarily precedes rigorous composite damage progression modeling. Yet, inspection of composite structures for subsurface damage remains largely focused on detection, resulting in a capability gap. In response to this need, angle longitudinal wave ultrasound was employed to characterize a composite surrogate containing a simulated three-dimensional delamination field with distinct regions of occluded features (shadow regions). Simple analytical models of the specimen were developed to guide subsequent experimentation through identification of optimal scanning parameters. The ensuing experiments provided visual evidence of the complete delamination field, including indications of features within the shadow regions. The results of this study demonstrate proof-of-principle for the use of angle longitudinal wave ultrasonic inspection for volumetric characterization of three-dimensional delamination fields. Furthermore, the techniques developed herein form the foundation of succeeding efforts to characterize impact delaminations within inhomogeneous laminar materials such as polymer matrix composites.

  20. Experimental Vibration Study on the Healthy and Delaminated Composite Plates

    Energy Technology Data Exchange (ETDEWEB)

    Ullah, Israr; Sinha, Jyoti K, E-mail: Jyoti.Sinha@manchester.ac.uk [School of Mechanical, Aerospace and Civil Engineering, University of Manchester, Manchester M13 9PL (United Kingdom)

    2011-07-19

    Vibration based damage, in particular delamination detection, in the composite structures is an active research area. The present study is also on the dynamics of the composite plates with and without delamination based on the experimental study. The test plate made of E-glass fibre and epoxy resins has been used here. A piezo-electric shaker has been used to excite the composite plate and the acceleration responses were measured using the number of accelerometers. The dynamics of the delaminated composite plates were then compared with a healthy composite plate when the vibration experiments have been conducted at the lower modes. The paper will discuss the observations made on the measured vibration responses from both the healthy and the delaminated plates and the possibility of the delamination detection from the experimental vibration data.

  1. Study on the Relationship between Lamellar Spacing and Growth Rate in the Regular Eutectic Growth by Monte-Carlo Simulation

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    A modified Monte-Carlo(MC) method to simulate the regular growth of binary eutectic alloys is presented. It is found that the growth rate has a linear dependence on the chemical potential difference between the solid and liquid; the relation between the lamellar spacing λ and growth rate R accords well with the prediction of Jackson-Hunt(JH)theory unless the growth rate is very Iow.

  2. Extended layerwise method for laminated composite plates with multiple delaminations and transverse cracks

    Science.gov (United States)

    Li, D. H.; Zhang, X.; Sze, K. Y.; Liu, Y.

    2016-10-01

    In this paper, the extended layerwise method (XLWM), which was developed for laminated composite beams with multiple delaminations and transverse cracks (Li et al. in Int J Numer Methods Eng 101:407-434, 2015), is extended to laminated composite plates. The strong and weak discontinuous functions along the thickness direction are adopted to simulate multiple delaminations and interlaminar interfaces, respectively, whilst transverse cracks are modeled by the extended finite element method (XFEM). The interaction integral method and maximum circumferential tensile criterion are used to calculate the stress intensity factor (SIF) and crack growth angle, respectively. The XLWM for laminated composite plates can accurately predicts the displacement and stress fields near the crack tips and delamination fronts. The thickness distribution of SIF and thus the crack growth angles in different layers can be obtained. These information cannot be predicted by using other existing shell elements enriched by XFEM. Several numerical examples are studied to demonstrate the capabilities of the XLWM in static response analyses, SIF calculations and crack growth predictions.

  3. BIOLOGY AND INTRINSIC GROWTH RATE OF EARWIG (Euborellia annulata

    Directory of Open Access Journals (Sweden)

    Nurnina Nonci

    2016-10-01

    Full Text Available Earwig (Euborellia annulata is a potential predator of corn borer (Ostrinia furnacalis, one of the most important pests of corn. To include the use of predator in integrated pest management (IPM to control the pest, it is necessary to understand the basic information of the predator. This study aimed to know biology and intrinsic growth rate of the predator feed on an artificial media (dog food. Ten pairs of newly emerging adults of the predator were placed in a small plastic container containing a mixture of soil and sand (1:1 v/v supplemented with an artificial food. The average temperature and relative humidity during the study were kept at 27.9-30.3oC and 76.7-92.3%, respectively. The biological aspects of the predator evaluated were number of eggs laid, hatched, and died, as well as its oviposition period and adult mortality. The intrinsic growth rate was studied from a group of 200 newly laid eggs and results were analyzed based on the method of Birch. The biological aspects study showed that number of eggs laid by a single female of E. annulata was 86-166, which were laid five times in a group of 9-45 eggs. The nymph consists of five instars. Length of nymphs varied ranging from 4 to 13 mm depends on their instar. The fifth instar nymph period was 4-6 days for female and 2-3 days for male. The period of first mating was shorter; the shortest was 2 minutes and the longest one was 70 minutes. Both male and female were able to do mating several times at an interval of several seconds or minutes. Pre-oviposition period was 6-13 days. The eggs were deposited five times, the first, second, third, fourth, and fifth oviposition period were 7-22 days, 7-21 days, 7-18 days, 11-18 days, and 11-21 days, respectively. The oviposition period was 32-59 days and postoviposition period was 21-51 days. Ratio between male and female was 1.4:1.0. The average natural mortality of E. annulata was 10.5% which means that 89.5% of deposited eggs hatched became

  4. Development and Application of Benchmark Examples for Mixed-Mode I/II Quasi-Static Delamination Propagation Predictions

    Science.gov (United States)

    Krueger, Ronald

    2012-01-01

    The development of benchmark examples for quasi-static delamination propagation prediction is presented. The example is based on a finite element model of the Mixed-Mode Bending (MMB) specimen for 50% mode II. The benchmarking is demonstrated for Abaqus/Standard, however, the example is independent of the analysis software used and allows the assessment of the automated delamination propagation prediction capability in commercial finite element codes based on the virtual crack closure technique (VCCT). First, a quasi-static benchmark example was created for the specimen. Second, starting from an initially straight front, the delamination was allowed to propagate under quasi-static loading. Third, the load-displacement as well as delamination length versus applied load/displacement relationships from a propagation analysis and the benchmark results were compared, and good agreement could be achieved by selecting the appropriate input parameters. The benchmarking procedure proved valuable by highlighting the issues associated with choosing the input parameters of the particular implementation. Overall, the results are encouraging, but further assessment for mixed-mode delamination fatigue onset and growth is required.

  5. The arc delaminate: a geochemical reservoir twice the size of the continental crust

    Science.gov (United States)

    Jagoutz, O.; Schmidt, M. W.

    2012-12-01

    Most primitive melts in arcs are basaltic in composition but the continental crust or arc average is andesitic. To evolve from a primitive basalt to an andesitic composition, cumulates have to be fractionated and, if gravitationally unstable, can be delaminated. Such lower crustal cumulates are exposed in the Kohistan arc (N Pakistan) in a 10 km section through dunites, wehrlites, websterites, cpx-bearing garnetites and hornblendites, and garnet gabbros. We have compiled primitive melts for nine island arcs from the literature and fitted these with the bulk Kohistan arc [1] or average bulk continental crust [2] and the Kohistan cumulates. By average, ~15 wt% wehrlite + ~20% garnet hornblendite + ~35% garnet gabbro complement ~30% arc or continental crust and explain very well (r2~2) the evolution from a tholeiitic/calc-alkaline primitive high-Mg basalt to the continental crust. The bulk delaminate has 44-48 wt% SiO2, total alkalis of 1.1-1.4 wt% and an XMg of 0.67-0.69. Mass fractions derived from major elements were employed to compare trace elements: cumulates+crust deviate on average only by 25-30% from primitive melts, with the biggest deviations on the subduction-added traces. Relative to the continental or arc crust, the delaminate mass results to 1.8-2.5 times that of the continental crust. The delaminates have rho=3.2-3.5 g/cm3 and VP=7.9-8.2. At the base of the crust, they are thus difficult to distinguish seismically. Once reaching a critical thickness, they may sink into the deeper mantle where they form a geochemical reservoir twice the size of the continental crust. With respect to primitive mantle, the delaminate is enriched in Ba, K, Sr, and P and REE with LREEdelaminate reservoir would develop highly unradiogenic Pb over time and would counterbalance the radiogenic MORB and OIB reservoirs. Delamination of twice as much material as remains in the arc crust increases the flux of primitive melt in arcs threefold. This places the magma

  6. [Specific growth rate and the rate of energy metabolism in the ontogenesis of axolotl, Ambystoma mexicanum (Amphibia: Ambystomatidae)].

    Science.gov (United States)

    Vladimirova, I G; Kleĭmenov, S Iu; Alekseeva, T A; Radzinskaia, L I

    2003-01-01

    Concordant changes in the rate of energy metabolism and specific growth rate of axolotls have been revealed. Several periods of ontogeny are distinguished, which differ in the ratio of energy metabolism to body weight and, therefore, are described by different allometric equations. It is suggested that the specific growth rate of an animal determines the type of dependence of energy metabolism on body weight.

  7. A finite element model for the analysis of buckling driven delaminations of thin films on rigid substrates

    Science.gov (United States)

    Gruttmann, F.; Pham, V. D.

    2008-02-01

    The delamination process of thin films on rigid substrates is investigated. Such systems are typically subject to high residual compression and modest adhesion causing them to buckling driven blisters. In certain cases buckles with the shape of telephone cords are observed. A finite element model for quasi-static delamination growth is developed. Applying a Reissner-Mindlin shell kinematic for the film allows C 0- continuous shape functions. The traction vector at the film-substrate interface is obtained from the derivative of a cohesive free energy. Incorporation of loading and unloading conditions is considered for the irreversible process. The equilibrium state is computed iteratively in dependence of the compressive residual stresses. The computed telephone cord delaminations are stable asymmetric configurations whereas the symmetric configurations are unstable.

  8. Does seed mass drive the differences in relative growth rate between growth forms?

    Science.gov (United States)

    Houghton, Jennie; Thompson, Ken; Rees, Mark

    2013-07-07

    The idea that herbaceous plants have higher relative growth rates (RGRs) compared with woody plants is fundamental to many of the most influential theories in plant ecology. This difference in growth rate is thought to reflect systematic variation in physiology, allocation and leaf construction. Previous studies documenting this effect have, however, ignored differences in seed mass. As woody species often have larger seeds and RGR is negatively correlated with seed mass, it is entirely possible the lower RGRs observed in woody species is a consequence of having larger seeds rather than different growth strategies. Using a synthesis of the published literature, we explored the relationship between RGR and growth form, accounting for the effects of seed mass and study-specific effects (e.g. duration of study and pot volume), using a mixed-effects model. The model showed that herbaceous species do indeed have higher RGRs than woody species, and that the difference was independent of seed mass, thus at all seed masses, herbaceous species on average grow faster than woody ones.

  9. Growth rate inhibition of phytopathogenic fungi by characterized chitosans

    Directory of Open Access Journals (Sweden)

    Enio N. Oliveira Junior

    2012-06-01

    Full Text Available The inhibitory effects of fifteen chitosans with different degrees of polymerization (DP and different degrees of acetylation (F A on the growth rates (GR of four phytopathogenic fungi (Alternaria alternata, Botrytis cinerea, Penicillium expansum, and Rhizopus stolonifer were examined using a 96-well microtiter plate and a microplate reader. The minimum inhibitory concentrations (MICs of the chitosans ranged from 100 µg × mL-1 to 1,000 µg × mL-1 depending on the fungus tested and the DP and F A of the chitosan. The antifungal activity of the chitosans increased with decreasing F A. Chitosans with low F A and high DP showed the highest inhibitory activity against all four fungi. P. expansum and B. cinerea were relatively less susceptible while A. alternata and R. stolonifer were relatively more sensitive to the chitosan polymers. Scanning electron microscopy of fungi grown on culture media amended with chitosan revealed morphological changes.

  10. Age, growth rates, and paleoclimate studies of deep sea corals

    Science.gov (United States)

    Prouty, Nancy G; Roark, E. Brendan; Andrews, Allen; Robinson, Laura; Hill, Tessa; Sherwood, Owen; Williams, Branwen; Guilderson, Thomas P.; Fallon, Stewart

    2015-01-01

    Deep-water corals are some of the slowest growing, longest-lived skeletal accreting marine organisms. These habitat-forming species support diverse faunal assemblages that include commercially and ecologically important organisms. Therefore, effective management and conservation strategies for deep-sea corals can be informed by precise and accurate age, growth rate, and lifespan characteristics for proper assessment of vulnerability and recovery from perturbations. This is especially true for the small number of commercially valuable, and potentially endangered, species that are part of the black and precious coral fisheries (Tsounis et al. 2010). In addition to evaluating time scales of recovery from disturbance or exploitation, accurate age and growth estimates are essential for understanding the life history and ecology of these habitat-forming corals. Given that longevity is a key factor for population maintenance and fishery sustainability, partly due to limited and complex genetic flow among coral populations separated by great distances, accurate age structure for these deep-sea coral communities is essential for proper, long-term resource management.

  11. Reproductive value, the stable stage distribution, and the sensitivity of the population growth rate to changes in vital rates

    Directory of Open Access Journals (Sweden)

    Hal Caswell

    2010-09-01

    Full Text Available The population growth rate, or intrinsic rate of increase, measures the potential rate of growth of a population with specified and fixed vital rates.The sensitivity of population growth rate to changes in the vital rates can be written in terms of the stable stage or age distribution and the reproductive value distribution. If the vital rate measures the rate of production of one type of individual by another, then the sensitivity of growth rate is proportional to the reproductive value of the destination type and the representation in the stable stage distribution of the source type. This formal relationship exists in three forms: one limited to age-classified populations, a second that applies to stage- or age-classified populations, and a third that uses matrix calculus. Each uses a different set of formal demographic techniques; together they provide a relationship that beautifully cuts across different types of demographic models.

  12. Prediction of cyclic delamination lives of plasma-sprayed hydroxyapatite coating on Ti-6Al-4V substrates with considering wear and dissolutions.

    Science.gov (United States)

    Otsuka, Yuichi; Kojima, Daisuke; Mutoh, Yoshiharu

    2016-12-01

    This study aims at developing the prediction model of cyclic delamination lives of plasma-sprayed HAp coating on Ti-6Al-4V substrate by considering wear by interface contacts and dissolution effect by Simulated Body Fluid (SBF). Delamination of HAp coating can lead to loosening of implants stem and final failure in vivo. In the fracture mechanism of interfaces between HAp coating with Ti substrates, only adhesive strength (interracial tensile strength) or fatigue behavior by longitudinal cracking have been observed. Cyclic delamination mechanism by considering various loading modes and corrosion effect has not been revealed yet. The interface delamination rates by cyclic loading were much higher than those by static loading tests. The result clearly demonstrated that the interface demalination behaviors are dominated not by maximum stress, but by stress range. Surface profile measurement and SEM observation also demonstrated damages by interface contact or third body wear at delamination tips of HAp coating only in the cases of compressions. The mechanisms of acceleration on the delaminations are third-body wear or wedge effect by worn particles which increased mean stress level during cyclic loading. Cyclic loading tests under SBF also revealed that cyclic delamination lives were shortened probably due to crevice corrosion at interfaces. Dissolutions at the tips of delaminations were observed by SEM images under tensile loading condition in SBF. Linearly adding the effects of wear and dissolutions into Paris law could successfully predict the delamination lives of HAp coating for various loading ratios in SBF. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

  13. Floating Carpets and the Delamination of Elastic Sheets

    KAUST Repository

    Wagner, Till J. W.

    2011-07-22

    We investigate the deformation of a thin elastic sheet floating on a liquid surface and subject to a uniaxial compression. We show that at a critical compression the sheet delaminates from the liquid over a finite region forming a delamination "blister." This blistering regime adds to the wrinkling and localized folding regimes that have been studied previously. The transition from wrinkled to blistered states occurs when delamination becomes energetically favorable compared with wrinkling. We determine the initial blister size and the evolution of blister size with continuing compression before verifying our theoretical results with experiments at a macroscopic scale. © 2011 American Physical Society.

  14. Microscale mechanics for metal thin film delamination along ceramic substrates

    Institute of Scientific and Technical Information of China (English)

    魏悦广

    2000-01-01

    The metal thin film delamination along metal/ceramic interface in the case of large scale yielding is studied by employing the strain gradient plasticity theory and the material microscale effects are considered. Two different f racture process models are used in this study to describe the nonlinear delamination phenomena for metal thin films. A set of experiments have been done on the mechanism of copper films delaminating from silica substrates, based on which the peak interface separation stress and the micro-length scale of material, as well as the dislocation-free zone size are predicted.

  15. Microscale mechanics for metal thin film delamination along ceramic substrates

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    The metal thin film delamination along metal/ceramic interface in the case of large scale yielding is studied by employing the strain gradient plasticity theory and the material microscale effects are considered.Two different fracture process models are used in this study to describe the nonlinear delamination phenomena for metal thin films.A set of experiments have been done on the mechanism of copper films delaminating from silica substrates,based on which the peak interface separation stress and the micro-length scale of material,as well as the dislocation-free zone size are predicted.

  16. Metabolism correlates with variation in post-natal growth rate among songbirds at three latitudes

    Science.gov (United States)

    Ton, Riccardo; Martin, Thomas E.

    2016-01-01

    1. Variation in post-natal growth rates is substantial among organisms and especially strong among latitudes because tropical and south temperate species typically have slower growth than north temperate relatives. Metabolic rate is thought to be a critical mechanism underlying growth rates after accounting for allometric effects of body mass. However, comparative tests on a large spatial scale are lacking, and the importance of metabolism for growth rates remains unclear both within and particularly across latitudes.

  17. Growth responses of Picea mongolica seedlings to defoliation rate

    Institute of Scientific and Technical Information of China (English)

    ZOU Chun-jing; HAN Shi-jie; QI Shu-yan; XU Wen-duo; LI Dao-tang

    2005-01-01

    Picea mongolica W. D. Xu. is an endemic species in China. The spruce forest is only found in semi-arid habitat in Inner Mongolia Autonomous Region of China. Based on the simulative defoliation experiment, it was proved that Picea mongolica seedlings had the compensatory and overcompensatory effects under the certain defoliation rate. The results of variance analysis on growth indexes showed that in PM Ⅰ (natural regeneration seedlings under Picea mongolica forest), the differences of H1 (height in June 23) and H2 (height in September 3) were extremely significant, and the difference of D(diameter at the breast height) were not significant. In PM Ⅱ (artificial regeneration seedlings under Betula platyphylla Suk. forest), the difference of H1 was significant, the difference of H2 was not significant, and the difference of D was extremely significant. The regression equations were established and the compensatory and overcompensatory points were obtained. In PM Ⅰ , the compensatory points of H1, H2, and D were 0.7628, 0.7436, 0.5725, and the overcompensatory points were 0.6056, 0.5802 and 0.2909 respectively. In PM Ⅱ, the compensatory points of H1, H2, and D are 0.5012, 0.3421, 0.2488, and the overcompensatory points are 0.4137, 0.2633 and 0.0747 respectively. These results suggested that the induction of compensatory growth mechanisms in spruce seedlings required a threshold level of defoliation, and the insects in Picea mongolica forest could be controlled in a certain degree.

  18. Clostridial necrotic enteritis in chicken associated with growth rate depression

    Directory of Open Access Journals (Sweden)

    Adin Priadi

    2008-03-01

    Full Text Available Clostridium perfringens (C. perfringens is a normal inhabitant of the intestinal tract of chickens as well as a potential pathogen causing necrotic enteritis. C. perfringens only causes necrotic enteritis when it transforms from non-toxin producing type to toxin producing type. The alpha toxin, (phospholipase C is believed to be a key to the occurrence of Clostridial necrotic enteritis (CNE. The best known predisposing factor is mucosal damage, caused by coccidiosis that damages the intestinal lining, making the gut susceptible to infections including C. perfringens. The purpose of this study was to observe the chicken performance in experimental CNE and field cases of CNE. Diagnosis of CNE were made by latex agglutination test, isolation and identification of the agent. Pathological and histopathological changes were also observed. Experimentally, NE could be reproduced when Eimeria sp and C. perfringens spores are inoculated in chicken. Signs of an NE are wet litter and diarrhea, and an increase in mortality is not often obvious. The depression of growth rate and feed efficiency of chicken become noticeable by week 5 because of damage to the intestine and the subsequent reduction in digestion and absorption of food. Subclinical form of CNE was also frequently found in the field, leading to significant decreases in performance. Chicken gut samples examinations revealed that subclinical form of CNE causes damage to the intestinal mucosa caused by C. perfringens leads to decreased digestion and absorption, increased feed conversion ratio and reduced weight gain. Dual infection with C. perfringens and Eimeria sp. was frequently found in field. The results of these studies provide evidence for C. perfringens as a causative bacteria for growth depression.

  19. Growth-rate regulated genes have profound impact on interpretation of transcriptome profiling in Saccharomyces cerevisiae

    DEFF Research Database (Denmark)

    Regenberg, Birgitte; Grotkjaer, Thomas; Winther, Ole

    2006-01-01

    Growth rate is central to the development of cells in all organisms. However, little is known about the impact of changing growth rates. We used continuous cultures to control growth rate and studied the transcriptional program of the model eukaryote Saccharomyces cerevisiae, with generation time...

  20. Free Edge Mixed Mode Delamination Analysis of Laminated Composites with Wrap-Around Configuration: A Finite Element Study

    Science.gov (United States)

    Choudhury, Pannalal; Das, Subhankar; Halder, Sudipta; Pandey, Krishna Murari

    2016-10-01

    Finite element analyses of laminated composites were done in the present study with respect to suppression of free edge delamination by an innovative technique. Wrap-around configuration was considered to determine its effectiveness over the wrapper-less laminated configuration on laminated composites. Nodal stresses were generated ahead of the crack tip through finite element analysis. This was used for determining interlaminar normal stress and inter laminar shear stress distributions at the critical interface. Later virtual crack closure technique was used to estimate the strain energy release rate components for several sizes of virtual crack extensions through a single finite element analysis. Computational analysis predicts Mode-I delamination as dominant mode of failure. This mode of delamination was significantly suppressed with wrap-around configuration on laminated composites.

  1. Estimation of uncertainty for fatigue growth rate at cryogenic temperatures

    Science.gov (United States)

    Nyilas, Arman; Weiss, Klaus P.; Urbach, Elisabeth; Marcinek, Dawid J.

    2014-01-01

    Fatigue crack growth rate (FCGR) measurement data for high strength austenitic alloys at cryogenic environment suffer in general from a high degree of data scatter in particular at ΔK regime below 25 MPa√m. Using standard mathematical smoothing techniques forces ultimately a linear relationship at stage II regime (crack propagation rate versus ΔK) in a double log field called Paris law. However, the bandwidth of uncertainty relies somewhat arbitrary upon the researcher's interpretation. The present paper deals with the use of the uncertainty concept on FCGR data as given by GUM (Guidance of Uncertainty in Measurements), which since 1993 is a recommended procedure to avoid subjective estimation of error bands. Within this context, the lack of a true value addresses to evaluate the best estimate by a statistical method using the crack propagation law as a mathematical measurement model equation and identifying all input parameters. Each parameter necessary for the measurement technique was processed using the Gaussian distribution law by partial differentiation of the terms to estimate the sensitivity coefficients. The combined standard uncertainty determined for each term with its computed sensitivity coefficients finally resulted in measurement uncertainty of the FCGR test result. The described procedure of uncertainty has been applied within the framework of ITER on a recent FCGR measurement for high strength and high toughness Type 316LN material tested at 7 K using a standard ASTM proportional compact tension specimen. The determined values of Paris law constants such as C0 and the exponent m as best estimate along with the their uncertainty value may serve a realistic basis for the life expectancy of cyclic loaded members.

  2. Long-run growth rate in a random multiplicative model

    Energy Technology Data Exchange (ETDEWEB)

    Pirjol, Dan [Institute for Physics and Nuclear Engineering, 077125 Bucharest (Romania)

    2014-08-01

    We consider the long-run growth rate of the average value of a random multiplicative process x{sub i+1} = a{sub i}x{sub i} where the multipliers a{sub i}=1+ρexp(σW{sub i}₋1/2 σ²t{sub i}) have Markovian dependence given by the exponential of a standard Brownian motion W{sub i}. The average value (x{sub n}) is given by the grand partition function of a one-dimensional lattice gas with two-body linear attractive interactions placed in a uniform field. We study the Lyapunov exponent λ=lim{sub n→∞}1/n log(x{sub n}), at fixed β=1/2 σ²t{sub n}n, and show that it is given by the equation of state of the lattice gas in thermodynamical equilibrium. The Lyapunov exponent has discontinuous partial derivatives along a curve in the (ρ, β) plane ending at a critical point (ρ{sub C}, β{sub C}) which is related to a phase transition in the equivalent lattice gas. Using the equivalence of the lattice gas with a bosonic system, we obtain the exact solution for the equation of state in the thermodynamical limit n → ∞.

  3. Utilization of Large Cohesive Interface Elements for Delamination Simulation

    DEFF Research Database (Denmark)

    Bak, Brian Lau Verndal; Lund, Erik

    2012-01-01

    This paper describes the difficulties of utilizing large interface elements in delamination simulation. Solutions to increase the size of applicable interface elements are described and cover numerical integration of the element and modifications of the cohesive law.......This paper describes the difficulties of utilizing large interface elements in delamination simulation. Solutions to increase the size of applicable interface elements are described and cover numerical integration of the element and modifications of the cohesive law....

  4. Variation in relative growth rate and growth traits in wild and cultivated Capsicum accessions grown under different temperatures

    NARCIS (Netherlands)

    Swart, de E.A.M.; Marcelis, L.F.M.; Voorrips, R.E.

    2006-01-01

    Differences in environmental conditions are known to influence plant growth and growth-related traits. The aim of this study was to identify the variation in relative growth rate (RGR), and its underlying physiological and morphological traits, in a group of ten wild and cultivated Capsicum accessio

  5. Ag-Coated Heterostructures of ZnO-TiO2/Delaminated Montmorillonite as Solar Photocatalysts

    Science.gov (United States)

    Hinojosa, Mariana; Tobajas, Montserrat; Alvarez, Maria Ariadna; Rodríguez-González, Vicente; Rodriguez, Juan Jose

    2017-01-01

    Heterostructures based on ZnO-TiO2/delaminated montmorillonite coated with Ag have been prepared by sol–gel and photoreduction procedures, varying the Ag and ZnO contents. They have been thoroughly characterized by XRD, WDXRF, UV–Vis, and XPS spectroscopies, and N2 adsorption, SEM, and TEM. In all cases, the montmorillonite was effectively delaminated with the formation of TiO2 anatase particles anchored on the clay layer’s surface, yielding porous materials with high surface areas. The structural and textural properties of the heterostructures synthesized were unaffected by the ZnO incorporated. The photoreduction led to solids with Ag nanoparticles decorating the surface. These materials were tested as photocatalysts for the degradation of several emerging contaminants with different nitrogen-bearing chemical structures under solar light. The catalysts yielded high rates of disappearance of the starting pollutants and showed quite stable performance upon successive applications. PMID:28817106

  6. Ag-Coated Heterostructures of ZnO-TiO2/Delaminated Montmorillonite as Solar Photocatalysts

    Directory of Open Access Journals (Sweden)

    Carolina Belver

    2017-08-01

    Full Text Available Heterostructures based on ZnO-TiO2/delaminated montmorillonite coated with Ag have been prepared by sol–gel and photoreduction procedures, varying the Ag and ZnO contents. They have been thoroughly characterized by XRD, WDXRF, UV–Vis, and XPS spectroscopies, and N2 adsorption, SEM, and TEM. In all cases, the montmorillonite was effectively delaminated with the formation of TiO2 anatase particles anchored on the clay layer’s surface, yielding porous materials with high surface areas. The structural and textural properties of the heterostructures synthesized were unaffected by the ZnO incorporated. The photoreduction led to solids with Ag nanoparticles decorating the surface. These materials were tested as photocatalysts for the degradation of several emerging contaminants with different nitrogen-bearing chemical structures under solar light. The catalysts yielded high rates of disappearance of the starting pollutants and showed quite stable performance upon successive applications.

  7. Delaminated graphene at silicon carbide facets: atomic scale imaging and spectroscopy.

    Science.gov (United States)

    Nicotra, Giuseppe; Ramasse, Quentin M; Deretzis, Ioannis; La Magna, Antonino; Spinella, Corrado; Giannazzo, Filippo

    2013-04-23

    Atomic-resolution structural and spectroscopic characterization techniques (scanning transmission electron microscopy and electron energy loss spectroscopy) are combined with nanoscale electrical measurements (conductive atomic force microscopy) to study at the atomic scale the properties of graphene grown epitaxially through the controlled graphitization of a hexagonal SiC(0001) substrate by high temperature annealing. This growth technique is known to result in a pronounced electron-doping (∼10(13) cm(-2)) of graphene, which is thought to originate from an interface carbon buffer layer strongly bound to the substrate. The scanning transmission electron microscopy analysis, carried out at an energy below the knock-on threshold for carbon to ensure no damage is imparted to the film by the electron beam, demonstrates that the buffer layer present on the planar SiC(0001) face delaminates from it on the (112n) facets of SiC surface steps. In addition, electron energy loss spectroscopy reveals that the delaminated layer has a similar electronic configuration to purely sp2-hybridized graphene. These observations are used to explain the local increase of the graphene sheet resistance measured around the surface steps by conductive atomic force microscopy, which we suggest is due to significantly lower substrate-induced doping and a resonant scattering mechanism at the step regions. A first-principles-calibrated theoretical model is proposed to explain the structural instability of the buffer layer on the SiC facets and the resulting delamination.

  8. Physiological growth hormone replacement and rate of recurrence of craniopharyngioma: the Genentech National Cooperative Growth Study.

    Science.gov (United States)

    Smith, Timothy R; Cote, David J; Jane, John A; Laws, Edward R

    2016-10-01

    OBJECTIVE The object of this study was to establish recurrence rates in patients with craniopharyngioma postoperatively treated with recombinant human growth hormone (rhGH) as a basis for determining the risk of rhGH therapy in the development of recurrent tumor. METHODS The study included 739 pediatric patients with craniopharyngioma who were naïve to GH upon entering the Genentech National Cooperative Growth Study (NCGS) for treatment. Reoperation for tumor recurrence was documented as an adverse event. Cox proportional-hazards regression models were developed for time to recurrence, using age as the outcome and enrollment date as the predictor. Patients without recurrence were treated as censored. Multivariate logistic regression was used to examine the incidence of recurrence with adjustment for the amount of time at risk. RESULTS Fifty recurrences in these 739 surgically treated patients were recorded. The overall craniopharyngioma recurrence rate in the NCGS was 6.8%, with a median follow-up time of 4.3 years (range 0.7-6.4 years.). Age at the time of study enrollment was statistically significant according to both Cox (p = 0.0032) and logistic (p treatment era.

  9. Integrated global digital image correlation for interface delamination characterization

    KAUST Repository

    Hoefnagels, Johan P.M.

    2013-07-23

    Interfacial delamination is a key reliability challenge in composites and micro-electronic systems due to (high-density) integration of dissimilar materials. Predictive finite element models are used to minimize delamination failures during design, but require accurate interface models to capture (irreversible) crack initiation and propagation behavior observed in experiments. Therefore, an Integrated Global Digital Image Correlation (I-GDIC) strategy is developed for accurate determination of mechanical interface behavior from in-situ delamination experiments. Recently, a novel miniature delamination setup was presented that enables in-situ microscopic characterization of interface delamination while sensitively measuring global load-displacement curves for all mode mixities. Nevertheless, extraction of detailed mechanical interface behavior from measured images is challenging, because deformations are tiny and measurement noise large. Therefore, an advanced I-GDIC methodology is developed which correlates the image patterns by only deforming the images using kinematically-admissible \\'eigenmodes\\' that correspond to the few parameters controlling the interface tractions in an analytic description of the crack tip deformation field, thereby greatly enhancing accuracy and robustness. This method is validated on virtual delamination experiments, simulated using a recently developed self-adaptive cohesive zone (CZ) finite element framework. © The Society for Experimental Mechanics, Inc. 2014.

  10. Buckle Driven Delamination in Thin Hard Film Compliant Substrate Systems

    Directory of Open Access Journals (Sweden)

    Bahr D.F.

    2010-06-01

    significantly from behavior predicted by rigid elastic solutions. To address this issue we developed a finite element analysis technique that employed a cohesive zone model to simulate interfacial crack growth. Specifying the traction-separation relationship, cohesive strength, and work of separation along with film thickness, film stress, and film and substrate properties, buckle width and height were determined as a function of interfacial toughness. The simulations indicate that an analysis based on rigid substrate solutions significantly underestimate toughness for prescribed buckle widths: a result consistent with an analysis by Yu and Hutchinson [5] that pieced together a solution based on non-linear plate theory with a solution for the linear film on substrate problem. More importantly, the results defined a lower limiting bound to seemingly disparate buckle deflection data (Figure 2. The variance from linear elastic behavior, especially for the small buckles, indicates more than substrate compliance is controlling behavior. Comparison of the experimental results with cohesive zone simulations suggests that the two buckle behaviors are associated with different levels of substrate yielding. In this presentation we will use the results to show how substrate compliance and deformation affect delamination and buckling of films on compliant substrates and provide a means to predict device performance.

  11. Buckle Driven Delamination in Thin Hard Film Compliant Substrate Systems

    Science.gov (United States)

    Moody, N. R.; Reedy, E. D.; Corona, E.; Adams, D. P.; Kennedy, M. S.; Cordill, M. J.; Bahr, D. F.

    2010-06-01

    behavior predicted by rigid elastic solutions. To address this issue we developed a finite element analysis technique that employed a cohesive zone model to simulate interfacial crack growth. Specifying the traction-separation relationship, cohesive strength, and work of separation along with film thickness, film stress, and film and substrate properties, buckle width and height were determined as a function of interfacial toughness. The simulations indicate that an analysis based on rigid substrate solutions significantly underestimate toughness for prescribed buckle widths: a result consistent with an analysis by Yu and Hutchinson [5] that pieced together a solution based on non-linear plate theory with a solution for the linear film on substrate problem. More importantly, the results defined a lower limiting bound to seemingly disparate buckle deflection data (Figure 2). The variance from linear elastic behavior, especially for the small buckles, indicates more than substrate compliance is controlling behavior. Comparison of the experimental results with cohesive zone simulations suggests that the two buckle behaviors are associated with different levels of substrate yielding. In this presentation we will use the results to show how substrate compliance and deformation affect delamination and buckling of films on compliant substrates and provide a means to predict device performance.

  12. How Much Growth Can We Expect? A Conditional Analysis of R-CBM Growth Rates by Level of Performance

    Science.gov (United States)

    Silberglitt, Benjamin; Hintze, John M.

    2007-01-01

    This study examined the reading growth rates of 7,544 students in Grades 2-6, measured over 1 year using Reading-Curriculum-Based Measurement (R-CBM) benchmark assessments administered in the fall, winter, and spring. The authors used hierarchical linear modeling to establish and compare student rates of growth within each grade level based on…

  13. Buckling delamination induced microchannel: Flow regulation in microfluidic devices

    Science.gov (United States)

    Kang, Jingtian; Wang, Changguo; Xue, Zhiming; Liu, Mengxiong; Tan, Huifeng

    2016-09-01

    The buckling delamination induced microchannel is employed to regulate fluid flow as a microvalve which can be utilized in microfluidic devices. This microvalve consists of a soft substrate and a stiff thin film, between which there is a pre-set small imperfection. Two critical strain values, namely, on-off strain and failure strain, have been proposed to determine the working strain interval using analytical predictions. Within this interval, the cross-sectional area of the microchannel can be controlled and predicted by different compressive strains of the film/substrate system. The fluid flow rate within this microchannel can be then estimated by both analytical and numerical simulations and adjusted to satisfy different values by alternating the compressive strain. In addition, a demonstrative experiment has been taken to verify the feasibility of this approach. This flexible microvalve has potential in the application where the use of traditional rigid microvalves is improper in flexible microfluidic devices. The method and approach of this paper can provide a general guide for flow rate control in microfluidic devices.

  14. Export incentives, exchange rate policy and export growth in Turkey

    NARCIS (Netherlands)

    S.J.G. van Wijnbergen; I. Arslan

    1993-01-01

    The driving forces behind the Turkish export miracle, and in fact its very existence, have remained a matter of debate We show there was a boom. As to contributing factors, import growth in the Middle East in excess of import growth elsewhere made a negative contribution. On exports to non-oil count

  15. Export incentives, exchange rate policy and export growth in Turkey

    NARCIS (Netherlands)

    van Wijnbergen, S.J.G.; Arslan, I.

    1993-01-01

    The driving forces behind the Turkish export miracle, and in fact its very existence, have remained a matter of debate We show there was a boom. As to contributing factors, import growth in the Middle East in excess of import growth elsewhere made a negative contribution. On exports to non-oil

  16. Does the growth rate of total amount in cash salaries relate to a transition in the suicide rate?

    National Research Council Canada - National Science Library

    Inoue, Ken; Fukunaga, Tatsushige; Okazaki, Yuji

    2012-01-01

    ... annual suicide rates by vital statistics and annual growth rates of total amount in cash salary from 1995 to 2009 in Japan, and we assessed the correlation between these factors during that period using single regression analysis in an excel (Microsoft, Japanese, made in Singapore) spreadsheet. During the study period, the annual suicide rates (/10...

  17. Adoption of multivariate copulae in prognostication of economic growth by means of interest rate

    Science.gov (United States)

    Saputra, Dewi Tanasia; Indratno, Sapto Wahyu, Dr.

    2015-12-01

    Inflation, at a healthy rate, is a sign of growing economy. Nonetheless, when inflation rate grows uncontrollably, it will negatively influence economic growth. Many tackle this problem by increasing interest rate to help protecting the value of money which is detained by inflation. There are few, however, who study the effects of interest rate in economic growth. The main purposes of this paper are to find how the change of interest rate affects economic growth and to use the relationship in prognostication of economic growth. By using expenditure model, a linear relationship between economic growth and interest rate is developed. The result is then used for prediction by normal copula and Vine Archimedean copula. It is shown that increasing interest rate to tackle inflation is a poor solution. Whereas implementation of copula in predicting economic growth yields an accurate result, with not more than 0.5% difference.

  18. Estimation of the growth curve and heritability of the growth rate for giant panda (Ailuropoda melanoleuca) cubs.

    Science.gov (United States)

    Che, T D; Wang, C D; Jin, L; Wei, M; Wu, K; Zhang, Y H; Zhang, H M; Li, D S

    2015-03-27

    Giant panda cubs have a low survival rate during the newborn and early growth stages. However, the growth and developmental parameters of giant panda cubs during the early lactation stage (from birth to 6 months) are not well known. We examined the growth and development of giant panda cubs by the Chapman growth curve model and estimated the heritability of the maximum growth rate at the early lactation stage. We found that 83 giant panda cubs reached their maximum growth rate at approximately 75-120 days after birth. The body weight of cubs at 75 days was 4285.99 g. Furthermore, we estimated that the heritability of the maximum growth rate was moderate (h(2) = 0.38). Our study describes the growth and development of giant panda cubs at the early lactation stage and provides valuable growth benchmarks. We anticipate that our results will be a starting point for more detailed research on increasing the survival rate of giant panda cubs. Feeding programs for giant panda cubs need further improvement.

  19. Comprehensively simulating the mixed-mode progressive delamination in composite laminates

    Science.gov (United States)

    Gao, Zhenyuan

    Delamination, or interlaminar debonding, is a commonly observed failure mechanism in composite laminates. It is of great significance to comprehensively simulate the mixed-mode progressive delamination in composite structures because by doing this, people can save a lot of effort in evaluating the safe load which a composite structure can endure. The objective of this thesis is to develop a numerical approach to simulating double-cantilever beam (DCB) and mixed-mode bending (MMB) tests and also of specifying/validating various cohesive models. A finite element framework, which consists of properly selecting time integration scheme (explicit dynamic), viscosity, load rate and mass scaling, is developed to yield converged and accurate results. Two illustrative cohesive laws (linear and power-law) are programmed with a user- defined material subroutine for ABAQUS/Explicit, VUMAT, and implemented into the finite element framework. Parameters defined in cohesive laws are studied to evaluate their effects on the predicted load-displacement curves. The finite element model, together with the predetermined model parameters, is found to be capable of producing converged and accurate results. The finite element framework, embedded with the illustrative cohesive laws, is found to be capable of handling various interfacial models. The present approach is concluded to be useful in simulating delamination with more sophisticated material models. Together with the method for determining model parameters, it can be used by computer codes other than ABAQUS.

  20. Modeling Delamination in Postbuckled Composite Structures Under Static and Fatigue Loads

    Science.gov (United States)

    Bisagni, Chiara; Brambilla, Pietro; Bavila, Carlos G.

    2013-01-01

    The ability of the Abaqus progressive Virtual Crack Closure Technique (VCCT) to model delamination in composite structures was investigated for static, postbuckling, and fatigue loads. Preliminary evaluations were performed using simple Double Cantilever Beam (DCB) and Mixed-Mode Bending (MMB) specimens. The nodal release sequences that describe the propagation of the delamination front were investigated. The effect of using a sudden or a gradual nodal release was evaluated by considering meshes aligned with the crack front as well as misaligned meshes. Fatigue simulations were then performed using the Direct Cyclic Fatigue (DCF) algorithm. It was found that in specimens such as the DCB, which are characterized by a nearly linear response and a pure fracture mode, the algorithm correctly predicts the Paris Law rate of propagation. However, the Abaqus DCF algorithm does not consider different fatigue propagation laws in different fracture modes. Finally, skin/stiffener debonding was studied in an aircraft fuselage subcomponent in which debonding occurs deep into post-buckling deformation. VCCT was shown to be a robust tool for estimating the onset propagation. However, difficulties were found with the ability of the current implementation of the Abaqus progressive VCCT to predict delamination propagation within structures subjected to postbuckling deformations or fatigue loads.

  1. Growth rate and resource imbalance interactively control biomass stoichiometry and elemental quotas of aquatic bacteria.

    Science.gov (United States)

    Godwin, Casey M; Whitaker, Emily A; Cotner, James B

    2017-03-01

    The effects of resource stoichiometry and growth rate on the elemental composition of biomass have been examined in a wide variety of organisms, but the interaction among these effects is often overlooked. To determine how growth rate and resource imbalance affect bacterial carbon (C): nitrogen (N): phosphorus (P) stoichiometry and elemental content, we cultured two strains of aquatic heterotrophic bacteria in chemostats at a range of dilution rates and P supply levels (C:P of 100:1 to 10,000:1). When growing below 50% of their maximum growth rate, P availability and dilution rate had strong interactive effects on biomass C:N:P, elemental quotas, cell size, respiration rate, and growth efficiency. In contrast, at faster growth rates, biomass stoichiometry was strongly homeostatic in both strains (C:N:P of 70:13:1 and 73:14:1) and elemental quotas of C, N, and P were tightly coupled (but not constant). Respiration and cell size increased with both growth rate and P limitation, and P limitation induced C accumulation and excess respiration. These results show that bacterial biomass stoichiometry is relatively constrained when all resources are abundant and growth rates are high, but at low growth rates resource imbalance is relatively more important than growth rate in controlling bacterial biomass composition. © 2016 by the Ecological Society of America.

  2. Constant growth rate can be supported by decreasing energy flux and increasing aerobic glycolysis

    NARCIS (Netherlands)

    Slavov, Nikolai; Budnik, Bogdan A; Schwab, David; Airoldi, Edoardo M; van Oudenaarden, Alexander

    2014-01-01

    Fermenting glucose in the presence of enough oxygen to support respiration, known as aerobic glycolysis, is believed to maximize growth rate. We observed increasing aerobic glycolysis during exponential growth, suggesting additional physiological roles for aerobic glycolysis. We investigated such ro

  3. Effect of Bacillus subtilis on the growth and survival rate of shrimp ...

    African Journals Online (AJOL)

    STORAGESEVER

    2009-07-20

    Jul 20, 2009 ... investigated on growth and survival rate of Litopenaeus vannamei during 60 days of culture. Sixteen aquaria with four ... the digestive enzyme activity, survival and growth of ...... Wolf Medical Publication p.186. Lt., London.

  4. Constant growth rate can be supported by decreasing energy flux and increasing aerobic glycolysis

    NARCIS (Netherlands)

    Slavov, Nikolai; Budnik, Bogdan A; Schwab, David; Airoldi, Edoardo M; van Oudenaarden, Alexander

    2014-01-01

    Fermenting glucose in the presence of enough oxygen to support respiration, known as aerobic glycolysis, is believed to maximize growth rate. We observed increasing aerobic glycolysis during exponential growth, suggesting additional physiological roles for aerobic glycolysis. We investigated such

  5. On the Rational Approximation of Analytic Functions Having Generalized Types of Rate of Growth

    Directory of Open Access Journals (Sweden)

    Devendra Kumar

    2012-01-01

    Full Text Available The present paper is concerned with the rational approximation of functions holomorphic on a domain G⊂C, having generalized types of rates of growth. Moreover, we obtain the characterization of the rate of decay of product of the best approximation errors for functions f having fast and slow rates of growth of the maximum modulus.

  6. The Renminbi Exchange Rate Reform and the Rebalancing of China’s Growth Model

    Institute of Scientific and Technical Information of China (English)

    JIANBO; SONG; SEAN; MACKINNON; SONGTAO; TAN

    2015-01-01

    This paper posits that a proper way to estimate the Renminbi(RMB) exchange rate is to base the evaluation on the Balassa-Samuelson effect, and that the optimal way to facilitate China’s growth model transformation is gradual RMB internationalization and capital account liberalization. Regression estimates show that the gross domestic product per capita growth rate, or the productivity growth rate, has strong explanatory validity when estimating the RMB exchange rate. The findings further assert that, as the growth of gross fixed capital formation slows, and the growth of household consumption speeds up, China’s economic growth will be sustained. The RMB exchange rate regime is one in which gradual reforms must yield to interest rates levels and hence should only be revalued conditionally.

  7. Quantitative characterization of the interfacial adhesion of Ni thin film on steel substrate: A compression-induced buckling delamination test

    Science.gov (United States)

    Zhu, W.; Zhou, Y. C.; Guo, J. W.; Yang, L.; Lu, C.

    2015-01-01

    A compression-induced buckling delamination test is employed to quantitatively characterize the interfacial adhesion of Ni thin film on steel substrate. It is shown that buckles initiate from edge flaws and surface morphologies exhibit symmetric, half-penny shapes. Taking the elastoplasticity of film and substrate into account, a three-dimensional finite element model for an edge flaw with the finite size is established to simulate the evolution of energy release rates and phase angles in the process of interfacial buckling-driven delamination. The results show that delamination propagates along both the straight side and curved front. The mode II delamination plays a dominant role in the process with a straight side whilst the curved front experiences almost the pure mode I. Based on the results of finite element analysis, a numerical model is developed to evaluate the interfacial energy release rate, which is in the range of 250-315 J/m2 with the corresponding phase angle from -41° to -66°. These results are in agreement with the available values determined by other testing methods, which confirms the effectiveness of the numerical model.

  8. The Effect of Bio-Fertilizers on Plant Growth and Growth Rate of Grafted Avocado (Persea americana Mill.

    Directory of Open Access Journals (Sweden)

    Lazarus Agus Sukamto

    2014-01-01

    Full Text Available Avocado (Persea americana Mill. is considered the most nutritious of all fruits. Avocado fruit contain high unsaturated fat, protein, and energy. It could be eaten fresh for food, drinks, cooking, and cosmetics. Recently, it has become a significant commodity in international trade. Indonesia is the 2nd avocado producing country, but only little quantity of avocado fruits could be exported. The farmers usually grow avocado plants from the seeds, without proper fertilizers in their backyards or small gardens. The problems could be solved by using grafted plants, proper fertilizers, and growing in a large scale of areas. This research was conducted to find out the effect of two liquid bio-fertilizers namely Mega Rhizo and Beyonic StarTmik on the plant growth and growth rate of grafted avocado plants. Some plant growths and growth rates of grafted avocado were influenced significantly by genotype accession, kind of bio-fertilizer, and weather (temperature.  Plant growth and growth rate of most avocado accessions were not significant differences to bio-fertilizer applications, but some avocado accessions on certain months were significant differently. Growth rate ranks of plant height based on accession were no. 10, 28, 13, 1, 5, 2, and 14 consecutively. Those of canopy width were no. 28, 10, 1, 2, 14, 5, and 13 consecutively. Those of trunk diameters were no. 28, 10, 2, 5, 1, 13, and 14 consecutively. All growth rate ranks based on bio-fertilizer were Mega Rhizo, Beyonic StarTmik, and control consecutively.

  9. MR imaging of delamination tears of the rotator cuff tendons

    Energy Technology Data Exchange (ETDEWEB)

    Walz, Daniel M.; Chen, Steven [North Shore University Hospital, Department of Radiology, Manhasset, NY (United States); Miller, Theodore T. [Hospital for Special Surgery, Department of Radiology and Imaging, New York, NY (United States); Hofman, Josh [Long Island Jewish Medical Center, New Hyde Park, NY (United States)

    2007-05-15

    The objective was to describe the imaging appearances and location of delamination tears of the rotator cuff tendons on non-contrast conventional MR imaging. This study was reviewed and approved by our Institutional Review Board. The reports of 548 consecutive MR examinations of the shoulder were reviewed, looking for mention or description of delamination tears of the rotator cuff. The images of the identified cases were then reviewed by two radiologists to confirm the findings. Correlation with surgical and arthroscopic information was then performed. Delamination tears were defined as horizontal retraction of either the bursal or articular surface of the tendon, manifest as thickening of the torn retracted edge, and/or interstitial splitting of the tendon, manifest as fluid-like high signal intensity on fat-suppressed T2-weighted oblique coronal images. Fourteen cases of delamination tears were identified in 13 patients. Ten of the cases involved the supraspinatus tendon, all with articular surface involvement. Nine of these supraspinatus cases were isolated tears and one occurred as part of a full thickness tear. All 10 of these supraspinatus cases showed medial retraction of the articular surface of the tendon, with thickening of the retracted edge, and 5 of the 10 had a demonstrable horizontal cleft in the interstitium. Four cases involved the subscapularis tendon, with articular surface disruption in three and pure interstitial delamination in one. Medial subluxation of the tendon of the long head of the biceps was present in all four cases. No delamination tears occurred on the bursal surface. Only three of the 14 shoulders underwent surgical repair with one confirmation of supraspinatus delamination, one confirmation of a subscapularis tear that had become a full thickness tear 10 months after initial imaging and another interstitial subscapularis delamination that was not identified arthroscopically. Delamination tears occur most often in the

  10. EFFECT OF SODIUM DODECYLBENZENESULFONIC ACID (SDBS ON THE GROWTH RATE AND MORPHOLOGY OF BORAX CRYSTAL

    Directory of Open Access Journals (Sweden)

    Suharso Suharso

    2010-06-01

    Full Text Available An investigation of the effect of sodium dodecylbenzenesulfonic acid (SDBS on both growth rate and morphology of borax crystal has been carried out.  This experiment was carried out at temperature of 25 °C and relative supersaturation of 0.21 and 0.74 under in situ cell optical microscopy method.  The result shows that SDBS inhibits the growth rate and changes the morphology of borax crystal.   Keywords: Borax; growth rate; crystallization, SDBS

  11. EFFECT OF SODIUM DODECYLBENZENESULFONIC ACID (SDBS) ON THE GROWTH RATE AND MORPHOLOGY OF BORAX CRYSTAL

    OpenAIRE

    Suharso, Suharso

    2010-01-01

    An investigation of the effect of sodium dodecylbenzenesulfonic acid (SDBS) on both growth rate and morphology of borax crystal has been carried out.  This experiment was carried out at temperature of 25 °C and relative supersaturation of 0.21 and 0.74 under in situ cell optical microscopy method.  The result shows that SDBS inhibits the growth rate and changes the morphology of borax crystal.   Keywords: Borax; growth rate; crystallization, SDBS

  12. Climate forcing growth rates: doubling down on our Faustian bargain

    Science.gov (United States)

    Hansen, James; Kharecha, Pushker; Sato, Makiko

    2013-03-01

    Rahmstorf et al 's (2012) conclusion that observed climate change is comparable to projections, and in some cases exceeds projections, allows further inferences if we can quantify changing climate forcings and compare those with projections. The largest climate forcing is caused by well-mixed long-lived greenhouse gases. Here we illustrate trends of these gases and their climate forcings, and we discuss implications. We focus on quantities that are accurately measured, and we include comparison with fixed scenarios, which helps reduce common misimpressions about how climate forcings are changing. Annual fossil fuel CO2 emissions have shot up in the past decade at about 3% yr-1, double the rate of the prior three decades (figure 1). The growth rate falls above the range of the IPCC (2001) 'Marker' scenarios, although emissions are still within the entire range considered by the IPCC SRES (2000). The surge in emissions is due to increased coal use (blue curve in figure 1), which now accounts for more than 40% of fossil fuel CO2 emissions. Figure 1. Figure 1. CO2 annual emissions from fossil fuel use and cement manufacture, an update of figure 16 of Hansen (2003) using data of British Petroleum (BP 2012) concatenated with data of Boden et al (2012). The resulting annual increase of atmospheric CO2 (12-month running mean) has grown from less than 1 ppm yr-1 in the early 1960s to an average ~2 ppm yr-1 in the past decade (figure 2). Although CO2 measurements were not made at sufficient locations prior to the early 1980s to calculate the global mean change, the close match of global and Mauna Loa data for later years suggests that Mauna Loa data provide a good approximation of global change (figure 2), thus allowing a useful estimate of annual global change beginning with the initiation of Mauna Loa measurements in 1958 by Keeling et al (1973). Figure 2. Figure 2. Annual increase of CO2 based on data from the NOAA Earth System Research Laboratory (ESRL 2012). CO2 change

  13. Individual Growth Rates of Nikolsky’s Viper, Vipera berus nikolskii (Squamata, Viperidae

    Directory of Open Access Journals (Sweden)

    Bondarenko Z. S.

    2016-02-01

    Full Text Available Capture-mark-recapture data was used to infer growth rates of the Nikolsky’s viper, Vipera berus nikolskii (Vedmederja, Grubant et Rudaeva, 1986, in the Eastern Ukraine. We have found that growth rate is negatively correlated with age. The difference in growth rates before maturation is not significant between different sexes. Growth rates decrease rapidly after maturation in males and females, however adult males retain significantly higher average growth rates. There is large dispersion of growth rates in the group of adult females, which is caused, probably, by alteration of complete arrest of growth in the years with reproduction and more intensive growth in the years without it. Asymptotic snout-ventral length estimated after Von Bertalanffy model was 680 mm in females and 630 mm in males. Females mature after fifth and males mature after fourth hibernation. The larger females in vipers can not be the result of higher growth rates in females, but are the outcome of a combination of other factors including different maturation time and size (older and being larger, and, perhaps, longer life span due to lower mortality. Growth rates of the Nikolsky’s viper in the nature are higher than in other species in the group of small Eurasian vipers.

  14. EBSD and Nanoindentation-Correlated Study of Delamination Fracture in Al-Li Alloy 2090

    Science.gov (United States)

    Tayon, Wesley A.; Crooks, Roy E.; Domack, Marcia S.; Wagner, John A.; Elmustafa, A. A.

    2008-01-01

    Al-Li alloys offer attractive combinations of high strength and low density. However, a tendency for delamination fracture has limited their use. A better understanding of the delamination mechanisms may identify methods to control delaminations through processing modifications. A combination of new techniques has been used to evaluate delamination fracture in Al-Li alloys. Both high quality electron backscattered diffraction (EBSD) information and valid nanoindentation measurements were obtained from fractured test specimens. Correlations were drawn between nano-scale hardness variations and local texture along delaminating boundaries. Intriguing findings were observed for delamination fracture through the combined analysis of grain orientation, Taylor factor, and kernel average misorientation.

  15. Effects of begging on growth rates of nestling chicks

    NARCIS (Netherlands)

    Rodriguez-Girones, MA; Zuniga, JM; Redondo, T

    2001-01-01

    We investigated whether an increase in begging levels delays growth of chicks. In experiment 1, we hand-reared nine pairs of ring dove squabs, divided into a control and a begging group. All squabs received similar amounts of food, but those in the begging group had to beg for a prolonged period in

  16. Effects of begging on growth rates of nestling chicks

    NARCIS (Netherlands)

    Rodriguez-Girones, MA; Zuniga, JM; Redondo, T

    2001-01-01

    We investigated whether an increase in begging levels delays growth of chicks. In experiment 1, we hand-reared nine pairs of ring dove squabs, divided into a control and a begging group. All squabs received similar amounts of food, but those in the begging group had to beg for a prolonged period in

  17. Frequency dependence of fatigue and corrosion fatigue crack growth rate

    Energy Technology Data Exchange (ETDEWEB)

    Marvasti, Mohammad Hassan; Chen, Weixing [Department of Chemical and Materials Engineering, University of Alberta, Edmonton, AB (Canada); Kania, Richard; Worthingham, Robert [TransCanada Pipelines Limited, Calgary, AB (Canada); Van Boven, Gregory [Spectra Energy Transmission Limited, Vancouver, BC (Canada)

    2010-07-01

    It was in the mid-1980s that stress corrosion cracking (SCC) was first found in near-neutral pH conditions on the TransCanada pipeline system. Since then, there have been many reports of pipeline cracking in Canada in these conditions. The huge quantity of pipelines in Canada and the number of failures have brought great interest in investigation of this cracking. A study was conducted on one X52 pipeline steel. It used compact tension specimens for corrosion fatigue and fatigue tests in air. The following conclusions were drawn: 1) crack growth in near-neutral pH conditions can be explained by a factor, which reflects the combined action of the mechanical driving force and the hydrogen effects; 2) mechanical dormancy can be common when oil and gas pipelines are in operation; 3) hydrogen is a determining factor of crack growth when pipeline steels are exposed to near-neutral pH conditions.

  18. Buckling induced delamination of graphene composites through hybrid molecular modeling

    Science.gov (United States)

    Cranford, Steven W.

    2013-01-01

    The efficiency of graphene-based composites relies on mechanical stability and cooperativity, whereby separation of layers (i.e., delamination) can severely hinder performance. Here we study buckling induced delamination of mono- and bilayer graphene-based composites, utilizing a hybrid full atomistic and coarse-grained molecular dynamics approach. The coarse-grain model allows exploration of an idealized model material to facilitate parametric variation beyond any particular molecular structure. Through theoretical and simulation analyses, we show a critical delamination condition, where ΔD∝kL4, where ΔD is the change in bending stiffness (eV), k the stiffness of adhesion (eV/Å4), and L the length of the adhered section (Å).

  19. Biological mechanisms discriminating growth rate and adult body weight phenotypes in two Chinese indigenous chicken breeds

    NARCIS (Netherlands)

    Dou, Tengfei; Zhao, Sumei; Rong, Hua; Gu, Dahai; Li, Qihua; Huang, Ying; Xu, Zhiqiang; Chu, Xiaohui; Tao, Linli; Liu, Lixian; Ge, Changrong; Pas, te Marinus F.W.; Jia, Junjing

    2017-01-01

    Background: Intensive selection has resulted in increased growth rates and muscularity in broiler chickens, in addition to adverse effects, including delayed organ development, sudden death syndrome, and altered metabolic rates. The biological mechanisms underlying selection responses remain

  20. Repair of prestressed concrete cylinder with localized delamination

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Shen, E-mail: swang@bechtel.com; Munshi, Javeed A., E-mail: jamunshi@bechtel.com

    2015-12-15

    For prestressed concrete cylindrical structures such as nuclear containments, tanks and silos, the curvature effect of the tendons introduces radial tensile stresses in the concrete shell which are generally neglected in the design of such structures. For example, many prestressed concrete nuclear containments in US, especially those which were not designed following radial reinforcement requirement of ACI-359, are reinforced only in the circumferential (hoop) and meridional (vertical) directions but not in the radial direction. This leaves these structures vulnerable to potential laminar cracking and delamination, especially during post-tensioning and/or detensioning process. Should delamination occur, the structure needs to be repaired by either replacing cracked concrete or by “pinning” the delaminated concrete layers together by post-installed anchors. The latter option of post-installed anchors is less invasive from construction stand point and generally suitable for repairing small or localized delamination only. A comprehensive study is undertaken to explore various aspects and design consideration of post-installed anchors for prestressed concrete cylinders. The radial tension demand is first established by combining a mechanical based model with a detailed finite element analysis. With such design demand for post-installed anchors established, the next step aims at developing the tightness requirement of existing delamination cracks for effective use of post-installed anchors. A comprehensive literature search and evaluation is carried out for shear transfer capacity across cracks of various widths. The findings are used to develop specific recommendations for acceptable crack widths to ensure adequate in-plane shear transfer capacity for various design load conditions. A design process for post-installed anchors is proposed for repairing a delaminated prestressed concrete cylindrical structure at the end of the paper, supplemented by an illustrative

  1. Solar effect on the Rayleigh-Taylor instability growth rate as simulated by the NCAR TIEGCM

    Science.gov (United States)

    Wu, Qian

    2017-04-01

    The TIEGCM (Thermosphere Ionosphere Electrodynamics General Circulation Model) is used to investigate the solar effect on the equatorial ionospheric Rayleigh-Taylor (R-T) instability growth rate, which is responsible for the occurrence of the plasma bubbles. The R-T growth rate is calculated for the solar maximum year 2003 and minimum 2009. The growth rate is strongly dependent on the solar activity. During solar maximum, the pre-reversal enhancement is much stronger leading to higher R-T growth rate. The R-T growth rates from the TIEGCM follow the same solar dependence as the observed occurrence of equatorial plasma bubbles by DMSP satellites. The R-T growth rate also enhances when the day/night terminator is parallel to the magnetic field line near the equator. The R-T growth rate does not correlate well with the solar F10.7 index on a short time scale ( 10 days) because the field-line integrated electron content gradient cancels out the positive correlation between the vertical ion drift with the F10.7 index. The TIEGCM result shows the importance of the electron content gradient to the R-T growth rate and the plasma bubble occurrence. The bubble occurrence rates were estimated based on the vertical ion drift simulation results.

  2. Role of Delamination in Zeolite-Catalyzed Aromatic Alkylation: UCB-3 versus 3-D Al-SSZ-70

    Energy Technology Data Exchange (ETDEWEB)

    Runnebaum, Ron C.; Ouyang, Xiaoying; Edsinga, Jeffrey A.; Rea, Thomas; Arslan, Ilke; Hwang, Son-Jong; Zones, Stacey I.; Katz, Alexander

    2014-07-03

    Delaminated zeolite UCB-3 exhibits 2.4-fold greater catalytic activity relative to its three-dimensional (3D) zeolite counterpart, Al-SSZ-70, and 2.0-fold greater activity (per catalyst mass) when compared with industrial catalyst MCM-22, for the alkylation of toluene with propylene at 523 K. The former increase is nearly equal to the observed relative increase in external surface area and acid sites upon delamination. However, at 423 K for the same reaction, UCB-3 exhibits a 3.5-fold greater catalytic activity relative to 3D Al-SSZ-70. The higher relative rate enhancement for the delaminated material at lower temperature can be elucidated on the basis of increased contributions from internal acid sites. Evidence of possible contributions from such acid sites is obtained by performing catalysis after silanation treatment, which demonstrates that although virtually all catalysis in MCM-22 occurs on the external surface, catalysis also occurs on internal sites for 3D Al-SSZ-70. The additional observed enhancement at low temperatures can therefore be rationalized by greater access to internal active sites as a result of sheet breakage during delamination. Such breakage leads to shorter characteristic internal diffusion paths and was visualized using TEM comparisons of UCB-3 and 3D Al-SSZ-70.

  3. Geometric analysis and estimation of the growth rate gradient on gastropod shells.

    Science.gov (United States)

    Noshita, Koji; Shimizu, Keisuke; Sasaki, Takenori

    2016-01-21

    The morphology of gastropod shells provides a record of the growth rate at the aperture of the shell, and molecular biological studies have shown that the growth rate gradient along the aperture of a gastropod shell can be closely related to gene expression at the aperture. Here, we develop a novel method for deriving microscopic growth rates from the macroscopic shapes of gastropod shells. The growth vector map of a shell provides information on the growth rate gradient as a vector field along the aperture, over the growth history. However, it is difficult to estimate the growth vector map directly from the macroscopic shape of a specimen, because the degree of freedom of the growth vector map is very high. In order to overcome this difficulty, we develop a method of estimating the growth vector map based on a growing tube model, where the latter includes fewer parameters to be estimated. In addition, we calculate an aperture map specifying the magnitude of the growth vector at each location, which can be compared with the expression levels of several genes or proteins that are important in morphogenesis. Finally, we show a concrete example of how macroscopic shell shapes evolve in a morphospace when microscopic growth rate gradient changes.

  4. Characterization of Multiple Delaminated Composite by Finite Element

    Directory of Open Access Journals (Sweden)

    SUDIP DEY

    2011-09-01

    Full Text Available In this paper, a finite element method is employed to investigate the natural frequencies of twisted rotating composite turbine blades subject to multiple delamination. The turbine blade is idealized as a shallow conical shell model with low aspect ratio. The formulation is based on Mindlin’s theory, QR iteration and multi-point constraint algorithm for moderate rotational speeds neglecting Coriolis effect. Computer codes are developed and the numerical results obtained for multiple delaminated graphite-epoxy cross-ply composite shallow conical shells are the first known non-dimensional frequencies for the type of analyses carried out here.

  5. Modeling Quasi-Static and Fatigue-Driven Delamination Migration

    Science.gov (United States)

    De Carvalho, N. V.; Ratcliffe, J. G.; Chen, B. Y.; Pinho, S. T.; Baiz, P. M.; Tay, T. E.

    2014-01-01

    An approach was proposed and assessed for the high-fidelity modeling of progressive damage and failure in composite materials. It combines the Floating Node Method (FNM) and the Virtual Crack Closure Technique (VCCT) to represent multiple interacting failure mechanisms in a mesh-independent fashion. Delamination, matrix cracking, and migration were captured failure and migration criteria based on fracture mechanics. Quasi-static and fatigue loading were modeled within the same overall framework. The methodology proposed was illustrated by simulating the delamination migration test, showing good agreement with the available experimental data.

  6. Progressive delamination in polymer matrix composite laminates: A new approach

    Science.gov (United States)

    Chamis, C. C.; Murthy, P. L. N.; Minnetyan, L.

    1992-01-01

    A new approach independent of stress intensity factors and fracture toughness parameters has been developed and is described for the computational simulation of progressive delamination in polymer matrix composite laminates. The damage stages are quantified based on physics via composite mechanics while the degradation of the laminate behavior is quantified via the finite element method. The approach accounts for all types of composite behavior, laminate configuration, load conditions, and delamination processes starting from damage initiation, to unstable propagation, and to laminate fracture. Results of laminate fracture in composite beams, panels, plates, and shells are presented to demonstrate the effectiveness and versatility of this new approach.

  7. The postbuckling analysis of laminated circular plate with elliptic delamination

    Science.gov (United States)

    Chen, Deliang; Chen, Changping; Fu, Yiming

    2011-01-01

    Based on the Von Karman plate theory, considering the effect of transverse shear deformation, and using the method of the dissociated three regions, the postbuckling governing equations for the axisymmetric laminated circular plates with elliptical delamination are derived. By using the orthogonal point collocation method, the governing equations, boundary conditions and continuity conditions are transformed into a group of nonlinear algebraically equation and the equations are solved with the alternative method. In the numerical examples, the effects of various elliptical in shape, delamination depth and different material properties on buckling and postbuckling of the laminated circular plates are discussed and the numerical results are compared with available data.

  8. The impact of risk management on internal and sustainable growth rate: Evidence from Tehran Stock Exchange

    Directory of Open Access Journals (Sweden)

    Hamid Reza Vakili Fard

    2014-09-01

    Full Text Available Measuring the relative risk of firms has been an open discussion among researchers. There are many studies on learning how leverage may influence on growth of the firms. This article reviews the relationship between risk management, internal and sustainable growth of accepted companies in Tehran stock exchange. The survey considers three types of risks including operating, financial and compound and investigates their relationships with internal growth rate as well as sustainable growth rate. Using some regression techniques, the study has determined negative and meaningful relationships between different types of leverage on side and internal as well as sustainable growth on the other side.

  9. Dividend growth, cash flow, and discount rate news

    OpenAIRE

    Garrett, Ian; Priestley, Richard

    2012-01-01

    Using a new variable based on a model of dividend smoothing, we find that dividend growth is highly predictable and that cash flow news contributes importantly to return variability. Cash flow betas derived from this predictability are central to explaining the size effect in the cross section of returns. However, they do not explain the value effect; this is explained by noise betas. We also find that the relative importance of cash flow news in explaining recent stock price run-ups and subs...

  10. Dividend growth, cash flow, and discount rate news

    OpenAIRE

    Garrett, Ian; Priestley, Richard

    2012-01-01

    Using a new variable based on a model of dividend smoothing, we find that dividend growth is highly predictable and that cash flow news contributes importantly to return variability. Cash flow betas derived from this predictability are central to explaining the size effect in the cross section of returns. However, they do not explain the value effect; this is explained by noise betas. We also find that the relative importance of cash flow news in explaining recent stock price run-ups and subs...

  11. EXCHANGE RATE AND ECONOMIC GROWTH. THE CASE OF ROMANIA

    Directory of Open Access Journals (Sweden)

    Nicolae Ghiba

    2010-12-01

    Full Text Available Considering the difficulties created by the economic crisis, many exporters have criticized the National Bank of Romania (NBR’s policy regarding the exchange rate evolution. They argue that depreciation is a necessary condition for recovery and not financial stability. On the contrary, Romania cannot afford a shock in the exchange rate level. The risk associated with such a measure is too high for an emerging country and it annihilates any export competitive advantages. Therefore, depreciation may delay the imperative of Romanian economic recovery. A solid economic recovery should have as starting point a financial system sound and stable. Excessive exchange rate depreciation jeopardizes the financial soundness of banks and the borrower’s ability to repay their loans. Therefore, it creates inflationary flare-ups, particularly dangerous for the economy of any state.

  12. Transcription factor control of growth rate dependent genes in Saccharomyces cerevisiae: A three factor design

    DEFF Research Database (Denmark)

    Fazio, Alessandro; Jewett, Michael Christopher; Daran-Lapujade, Pascale;

    2008-01-01

    Background: Characterization of cellular growth is central to understanding living systems. Here, we applied a three-factor design to study the relationship between specific growth rate and genome-wide gene expression in 36 steady-state chemostat cultures of Saccharomyces cerevisiae. The three...... factors we considered were specific growth rate, nutrient limitation, and oxygen availability. Results: We identified 268 growth rate dependent genes, independent of nutrient limitation and oxygen availability. The transcriptional response was used to identify key areas in metabolism around which m...... transcription factor target sets, transcription factors that coordinate balanced growth were also identified. Our analysis shows that FhII, Rap1, and Sfp1, regulating protein biosynthesis, have significantly enriched target sets for genes up-regulated with increasing growth rate. Cell cycle regulators...

  13. Probabilistic Delamination Diagnosis of Composite Materials Using a Novel Bayesian Imaging Method

    Data.gov (United States)

    National Aeronautics and Space Administration — In this paper, a probabilistic delamination location and size detection framework is proposed. The delamination probability image using Lamb wave-based damage...

  14. Dependence of Growing High-Quality Gem Diamonds on Growth Rates by Temperature Gradient Method

    Institute of Scientific and Technical Information of China (English)

    ZANG Chuan-Yi; JIA Xiao-Peng; REN Guo-Zhong; WANG Xian-Cheng

    2004-01-01

    @@ Using the temperature gradient method under high pressure and high temperature, we investigate the dependence of growing high-quality gem diamond crystals on the growth rates. It is found that the lower the growth rate of gem diamond crystals, the larger the temperature range of growing high-quality gem diamond crystals, and the easier the control of temperature.

  15. Influence of growth rate and starvation on fluorescent in situ hybridization of Rhodopseudomonas palustris

    NARCIS (Netherlands)

    Oda, Y; Slagman, SJ; Meijer, WG; Forney, LJ; Gottschal, JC

    In situ hybridization with a fluorescently labeled 16S rRNA-targeted probe was examined using Rhodopseudomonas palustris as a model organism, which had been grown at different rates and under different conditions of growth and starvation. The specific growth rate did not affect the percentage of

  16. THE GROWTH RATE AND STATISTICAL FLUCTUATION OF BOSE-EINSTEIN CONDENSATE FORMATION

    Institute of Scientific and Technical Information of China (English)

    Yan Ke-zhu; Tan Wei-han

    2000-01-01

    Using the generating function method to solve the master equation ofBose-Einstein condensate and to evaluate the growth rate, statisticalfluctuation of condensate atoms, we find out that there is a plateau inthe growth rate curve and a super-Poisson distribution observed.

  17. Climate is a stronger driver of tree and forest growth rates than soil and disturbance

    NARCIS (Netherlands)

    Toledo, M.; Poorter, L.; Peña-Claros, M.; Alarcón, A.; Balcázar, J.; Leaño, C.; Licona, J.C.; Llanque, O.; Vroomans, V.; Zuidema, P.; Bongers, F.

    2011-01-01

    1. Essential resources such as water, nutrients and light vary over space and time and plant growth rates are expected to vary accordingly. We examined the effects of climate, soil and logging disturbances on diameter growth rates at the tree and stand level, using 165 1-ha permanent sample plots di

  18. Relative growth rate variation of evergreen and deciduous savanna tree species is driven by different traits

    NARCIS (Netherlands)

    Tomlinson, K.W.; Poorter, L.; Bongers, F.; Borghetti, F.; Jacobs, L.; Langevelde, van F.

    2014-01-01

    Background and Aims Plant relative growth rate (RGR) depends on biomass allocation to leaves (leaf mass fraction, LMF), efficient construction of leaf surface area (specific leaf area, SLA) and biomass growth per unit leaf area (net assimilation rate, NAR). Functional groups of species may differ in

  19. Halophilic (aerobic) bacterial growth rate of mangrove ecosystem.

    Science.gov (United States)

    Khan, A Saleem; Ali, M Sheik; Baig, I Juned Ahmed

    2009-09-01

    Mangroves are woody specialized trees of tropics and are valuable flora contributing to economical, ecological, scientific and cultural resources. They thrive in salty environments like coastal regions and are aid towards disaster management facing the onslaught of giant waves such as Tsunami. Analysis of mangrove soil on the banks of the Adyar river behind the Theosophical society campus, Adyar, Chennai, India, gave a startling revelation of microorganisms that can tolerate different salinity ranges. Previous studies in Pichavaram delta, have reported bacterial isolates such as nitrogen fixing bacteria, halophiles and several others. However their efficiency in the growth of mangrove forest has been studied to a lesser extent. The present study has been designed and formulated to estimate halophilic (aerobic) bacterial load from mangroves soil sample based on depth and salinity of the soil and further the efficiency if any of these isolates in the growth of mangroves. Results have been correlated and a cohesive conclusion reached for further intensive research. This study throws light on the ecology of the bacterial population in the coastal marine environment inhabited bymangroves and its possible role in disaster mitigation.

  20. Optimum growth rate of Belgian Blue double-muscled replacement ...

    African Journals Online (AJOL)

    Leo Fiems

    A higher rate of gain from zero to four months did not affect subsequent heifer BWG. There was ... especially when this period coincided with the grazing season. This may ... All cows, except those with BWBC >650 kg, lost weight, and BW loss.

  1. Wavy membranes and the growth rate of a planar chemical garden: Enhanced diffusion and bioenergetics

    OpenAIRE

    Ding, Yang; Batista, Bruno; Steinbock, Oliver; Cartwright, Julyan H. E.; Cardoso, Silvana S. S.

    2016-01-01

    In order to model ion transport across protocell membranes in Hadean hydrothermal vents, we consider both theoretically and experimentally the planar growth of a precipitate membrane formed at the interface between two parallel fluid streams in a two-dimensional microfluidic reactor. The growth rate of the precipitate is found to be proportional to the square root of time, which is characteristic of diffusive transport. However, the dependence of the growth rate on the concentrations of hydro...

  2. What's New and What's Old in New Growth Theory: Endogenous Technology, Microfoundation, and Growth Rate Predictions

    OpenAIRE

    Schneider, Johannes; Ziesemer, Thomas

    1994-01-01

    This paper surveys new growth theory with emphasis on three open issues known from old endogenous growth theory of the sixties: i) What is the content of the black-box variable 'technology'? ii) Which market structure prevails when endogenous technology generates dynamically increasing returns to scale? iii) What are the justifications for and implications of different specifications of production functions for technical progress? We show that new growth theory has made progress on the first ...

  3. Lower-leg growth rates in children with asthma during treatment with ciclesonide and fluticasone propionate

    DEFF Research Database (Denmark)

    Lone, Agertoft; Søren, Pedersen

    2009-01-01

    ) and the ICS fluticasone propionate (FP) on lower-leg growth rate and hypothalamic-pituitary-adrenal-axis function in children with mild asthma. In a double-blind, placebo-controlled, three-period crossover study, 28 children, aged 6-12 yr, sequentially received daily doses of CIC 320 mug, FP 375 mug (330 mug....... No statistically significant differences were seen in lower-leg growth rates between CIC (0.30 mm/wk) and placebo (0.43 mm/wk) treatments. Lower-leg growth rate during FP treatment (0.08 mm/wk) was significantly reduced compared with both placebo [least squares (LS) mean: -0.35 (95% CI: -0.53, -0.18; p = 0...... no significant effect on lower-leg growth rate in children aged 6-12 yr with mild asthma. In contrast, a similar dose of FP significantly reduced lower-leg growth rate compared with placebo and CIC....

  4. How Do Output Growth Rate Distributions Look Like? Some Time-Series Evidence on OECD Countries

    CERN Document Server

    Fagiolo, G; Roventini, A; Fagiolo, Giorgio; Napoletano, Mauro; Roventini, Andrea

    2006-01-01

    This paper investigates the statistical properties of within-country GDP and industrial production (IP) growth rate distributions. Many empirical contributions have recently pointed out that cross-section growth rates of firms, industries and countries all follow Laplace distributions. In this work, we test whether also within-country, time-series GDP and IP growth rates can be approximated by tent-shaped distributions. We fit output growth rates with the exponential-power (Subbotin) family of densities, which includes as particular cases both the Gaussian and the Laplace distributions. We find that, for a large number of OECD countries including the U.S., both GDP and IP growth rates are Laplace distributed. Moreover, we show that fat-tailed distributions robustly emerge even after controlling for outliers, autocorrelation and heteroscedasticity.

  5. The effect of density gradient on the growth rate of relativistic Weibel instability

    Energy Technology Data Exchange (ETDEWEB)

    Mahdavi, M., E-mail: m.mahdavi@umz.ac.ir [Physics Department, University of Mazandaran, P.O. Box 47415-416, Babolsar (Iran, Islamic Republic of); Khodadadi Azadboni, F., E-mail: f.khodadadi@stu.umz.ac.ir [Physics Department, University of Mazandaran, P.O. Box 47415-416, Babolsar (Iran, Islamic Republic of); Young Researchers Club, Sari Branch, Islamic Azad University, P.O. Box 48161-194, Sari (Iran, Islamic Republic of)

    2014-02-15

    In this paper, the effect of density gradient on the Weibel instability growth rate is investigated. The density perturbations in the near corona fuel, where temperature anisotropy, η, is larger than the critical temperature anisotropy, η{sub c}, (η > η{sub c}), enhances the growth rate of Weibel instability due to the sidebands coupled with the electron oscillatory velocity. But for η < η{sub c}, the thermal spread of the energetic electrons reduces the growth rate. Also, the growth rate can be reduced if the relativistic parameter (Lorentz factor) is sufficiently large, γ > 2. The analysis shows that relativistic effects and density gradient tend to stabilize the Weibel instability. The growth rate can be reduced by 88% by reducing η by a factor of 100 and increasing relativistic parameter by a factor of 3.

  6. Two-Way Selection for Growth Rate in the Common Carp (CYPRINUS CARPIO L.)

    Science.gov (United States)

    Moav, R.; Wohlfarth, G.

    1976-01-01

    The domesticated European carp was subjected to a two-way selection for growth rate. Five generations of mass selection for faster growth rate did not yield any response, but subsequent selection between groups (families) resulted in considerable progress while maintaining a large genetic variance. Selection for slow growth rate yielded relatively strong response for the first three generations. Random-bred control lines suffered from strong inbreeding depression and when two lines were crossed, the F1 showed a high degree of heterosis. Selection was performed on pond-raised fish, but growth rate was also tested in cages. A strong pond-cage genetic interaction was found. A theoretical explanation was suggested involving overdominance for fast growth rate and amplification through competition of intra-group but not inter-group variation. PMID:1248737

  7. Causes of variation in growth rate of reindeer calves

    Directory of Open Access Journals (Sweden)

    C. J. Petersson

    1993-12-01

    Full Text Available Weights of individual reindeer calves were registered on 3 or 4 occasions from the July roundup to the last slaughter roundup in January during each of four consecutive years (1986 to 1989. The observations were made in a tagged herd located in the southern part of the reindeer area in Sweden (63°N, 12°E. A total of 10 400 live-weight measurements were made, and the relationship between pre-slaughter weight and carcass weight was estimated using data from 109 individuals. Variation in weight and weight gain between weighing occasions was related to sex, number of days in the corral, scale and year. Non-linear growth curves were fit to the adjusted weights. For each sex, smoothed average weights and dispersions, both within and between year, as well as the coefficient of variation were calculated from data generated from the estimated functions. Individual calf weights were shown to be influenced by sex, weighing day within occasion, and by year. Reindeer calves gained between 20 and 25 kg in live body weight from two to 6-8 months of age. Male calves were heavier than female calves over the whole period and they gained in live weight on average 10 g/day more than female calves. Between year coefficient of variation was between 1.5 and 7% with the largest variation between years for July and January weights and the lowest variation for September weights. The growth curves showed that the major increase in weight was between July and September. From September to December/January the additional increase was only 5%. Dressing-percentage was influenced by live weight prior to slaughter. A positive relationship between live weight and dressing percentage was shown.

  8. Rate limits in silicon sheet growth - The connections between vertical and horizontal methods

    Science.gov (United States)

    Thomas, Paul D.; Brown, Robert A.

    1987-01-01

    Meniscus-defined techniques for the growth of thin silicon sheets fall into two categories: vertical and horizontal growth. The interactions of the temperature field and the crystal shape are analyzed for both methods using two-dimensional finite-element models which include heat transfer and capillarity. Heat transfer in vertical growth systems is dominated by conduction in the melt and the crystal, with almost flat melt/crystal interfaces that are perpendicular to the direction of growth. The high axial temperature gradients characteristic of vertical growth lead to high thermal stresses. The maximum growth rate is also limited by capillarity which can restrict the conduction of heat from the melt into the crystal. In horizontal growth the melt/crystal interface stretches across the surface of the melt pool many times the crystal thickness, and low growth rates are achievable with careful temperature control. With a moderate axial temperature gradient in the sheet a substantial portion of the latent heat conducts along the sheet and the surface of the melt pool becomes supercooled, leading to dendritic growth. The thermal supercooling is surpressed by lowering the axial gradient in the crystal; this configuration is the most desirable for the growth of high quality crystals. An expression derived from scaling analysis relating the growth rate and the crucible temperature is shown to be reliable for horizontal growth.

  9. Growth rates of atmospheric molecular clusters determined from cluster appearance times and collision-evaporation fluxes

    Science.gov (United States)

    Kontkanen, Jenni; Olenius, Tinja; Lehtipalo, Katrianne; Vehkamäki, Hanna; Kulmala, Markku

    2015-04-01

    The probability of freshly formed particles to survive to climatically relevant sizes is determined by the competition between the coagulation loss rate and the particle growth rate. Therefore, various methods have been developed to deduce the growth rates from measured particle size distributions. Recently, the growth rates of sub-3nm clusters have been determined based on the appearance times of different cluster sizes. However, it is not clear to what extent these growth rates are consistent with the growth rates corresponding to molecular fluxes between clusters. In this work, we simulated the time evolution of a population of sub-3 nm molecular clusters and compared the growth rates determined (1) from the cluster appearance times and (2) from the collision-evaporation fluxes between different cluster sizes. We performed a number of simulations by varying the ambient conditions and the properties of the model substance. In the first simulation set, the Gibbs free energy of the formation of the clusters was assumed to have a single maximum and no minima, corresponding to a monotonically increasing stability as a function of cluster size. The saturation vapor pressure was selected so that the growth proceeded solely via monomer additions. The growth rates were determined separately for each cluster. However, to see the effect of finite size resolution, we also performed simulations where the clusters were grouped into size bins, for which we determined the growth rates. In the second simulation set, the saturation vapor pressure was lowered so that the collisions of small clusters significantly contributed to the growth. As the growth rate of a single cluster is ambiguous in this case, the growth rates were determined only for different size bins. We performed simulations using a similar free energy profile as in other simulations but we also used a free energy profile containing a local minimum, corresponding to small stable clusters. Our simulations show that

  10. The Effect of Strike Face Geometry on the Dynamic Delamination of Composite Back Plates

    Science.gov (United States)

    2015-01-01

    Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that...specimen allowed for capture of dynamic delamination images with high-speed photography . The projected delamination area was quantified using commercially...14 Fig. B-1 Delaminations outlined using tools in Image Pro Plus ..................................................22 Fig. B-2 Yellow

  11. Mode III effects on interface delamination

    DEFF Research Database (Denmark)

    Tvergaard, Viggo; Hutchinson, J.W.

    2008-01-01

    mode III has an effect. Subsequently, the focus is on crack growth along an interface between an elastic-plastic solid and an elastic substrate. The analyses are carried out for conditions of small-scale yielding, with the fracture process at the interface represented by a cohesive zone model. Due......For crack growth along an interface between dissimilar materials the effect of combined modes I, II and III at the crack-tip is investigated. First, in order to highlight situations where crack growth is affected by a mode III contribution, examples of material configurations are discussed where...... to the mismatch of elastic properties across the interface the corresponding elastic solution has an oscillating stress singularity, and this solution is applied as boundary conditions on the outer edge of the region analyzed. For several combinations of modes I, II and III crack growth resistance curves...

  12. Fatigue Property of Nano-grained Delaminated Low-carbon Steel Sheet

    Institute of Scientific and Technical Information of China (English)

    X. Li; T.F. Jing; M.M. Lu; R. Xu; B.Y. Liang; J.W. Zhang

    2011-01-01

    Tension-tension fatigue life tests on nano-grained delaminated Iow-carbon steel sheet under different fatigue loads are carried out to study the fatigue properties of the steel. The three-dimensional microstructures of the steel are observed by TEM. In addition, the morphology of the fatigue fracture of the specimen under different loads is observed by SEM. The results show that micro-cracks form on the weak interface of the nano-grained steel under Iow-stress conditions, which hinders the propagation of the main cracks and reduces the fatigue crack propagation rate, resulting in the extending fatigue life of the steel.

  13. Adhesion of polymer coatings studied by laser-induced delamination

    NARCIS (Netherlands)

    Fedorov, A; De Hosson, JTM

    2005-01-01

    This paper concentrates on the laser-induced delamination technique, aimed at measuring the practical work of adhesion of thin polymer coatings on metal substrates. In this technique an infrared laser-pulsed beam is used to create an initial blister. Upon increasing the pulse intensity, the size of

  14. Modeling delamination due to thermal stress in optical storage media

    Science.gov (United States)

    Nkansah, M. A.; Evans, K. E.

    1990-04-01

    Finite element analysis is used to calculate the shape of blisters formed in bilayer optical storage media due to the buildup of thermal stresses during laser writing. It is shown that practically usable blisters may be expected to form in a time period of about 15 ns. Such a thermal stress delamination process may also precede melting in conventional pit formation processes.

  15. Delamination and debonding failure of laminated composite T-joints

    NARCIS (Netherlands)

    Cui, H.

    2014-01-01

    Composites are increasingly being used in aerospace, automotive and other industries. The T-joint (also named stringer stiffened skin) is a typical connection, broadly used in thin-walled structures, such as the wing and fuselage of aircraft. This thesis presents the analysis of the delamination and

  16. Ets-1 confers cranial features on neural crest delamination.

    Directory of Open Access Journals (Sweden)

    Eric Théveneau

    Full Text Available Neural crest cells (NCC have the particularity to invade the environment where they differentiate after separation from the neuroepithelium. This process, called delamination, is strikingly different between cranial and trunk NCCs. If signalings controlling slow trunk delamination start being deciphered, mechanisms leading to massive and rapid cranial outflow are poorly documented. Here, we show that the chick cranial NCCs delamination is the result of two events: a substantial cell mobilization and an epithelium to mesenchyme transition (EMT. We demonstrate that ets-1, a transcription factor specifically expressed in cranial NCCs, is responsible for the former event by recruiting massively cranial premigratory NCCs independently of the S-phase of the cell cycle and by leading the gathered cells to straddle the basal lamina. However, it does not promote the EMT process alone but can cooperate with snail-2 (previously called slug to this event. Altogether, these data lead us to propose that ets-1 plays a pivotal role in conferring specific cephalic characteristics on NCC delamination.

  17. Webbing and Delamination of Drug Eluting Stent Coatings.

    Science.gov (United States)

    Hopkins, C; Sweeney, C A; O'Connor, C; McHugh, P E; McGarry, J P

    2016-02-01

    The advancement of the drug-eluting stent technology raises the significant challenge of safe mechanical design of polymer coated stent systems. Experimental images of stent coatings undergoing significant damage during deployment have been reported; such coating damage and delamination can lead to complications such as restenosis and increased thrombogenicity. In the current study a cohesive zone modeling framework is developed to predict coating delamination and buckling due to hinge deformation during stent deployment. Models are then extended to analyze, for the first time, stent-coating damage due to webbing defects. Webbing defects occur when a bond forms between coating layers on adjacent struts, resulting in extensive delamination of the coating from the strut surfaces. The analyzes presented in this paper uncover the mechanical factors that govern webbing induced coating damage. Finally, an experimental fracture test of a commercially available stent coating material is performed and results demonstrate that the high cohesive strength of the coating material will prevent web fracture, resulting in significant coating delamination during stent deployment.

  18. Modeling the buckling and delamination of thin films

    Science.gov (United States)

    Jagla, E. A.

    2007-02-01

    I study numerically the problem of delamination of a thin film elastically attached to a rigid substrate. A nominally flat elastic thin film is modeled using a two-dimensional triangular mesh. Both compression and bending rigidities are included to simulate compression and bending of the film. The film can buckle (i.e., abandon its flat configuration) when enough compressive strain is applied. The buckled configurations of a piece of film with stripe geometry are investigated as a function of the compressive strain. It is found that the stable configuration depends strongly on the applied strain and the Poisson ratio of the film. Next, the film is considered to be attached to a rigid substrate by springs that can break when the detaching force exceeds a threshold value, producing partial delamination of the film. Delamination is induced by a mismatch of the relaxed configurations of film and substrate. The morphology of the delaminated film can be followed and compared with available experimental results as a function of model parameters. “Telephone-cord,” polygonal, and “brainlike” patterns qualitatively similar to experimentally observed configurations are obtained in different parameter regions. The main control parameters that select the different patterns are the strain mismatch between film and substrate and the degree of in-plane relaxation within the unbuckled regions.

  19. Influence of surface pretreatment of fiber posts on cement delamination

    NARCIS (Netherlands)

    Jongsma, L.A.; Kleverlaan, C.J.; Feilzer, A.J.

    2010-01-01

    Objectives To evaluate the influence of post surface pretreatment on the delamination strength of different cements from a prefabricated FRC post tested in a three-point bending test. Methods Three cements were tested; RelyX Unicem, DC Core Automix, and Panavia F2.0. Per cement, 40 posts (D.T. Light

  20. Impact Delamination and Fracture in Aluminum/Acrylic Sandwich Plates

    Science.gov (United States)

    Liaw, Benjamin; Zeichner, Glenn; Liu, Yanxiong; Bowles, Kenneth J. (Technical Monitor)

    2000-01-01

    Impact-induced delamination and fracture in 6061-T6 aluminum/cast acrylic sandwich plates adhered by epoxy were generated in an instrumented drop-weight impact machine. Although only a small dent was produced on the aluminum side when a hemispherical penetrator tup was dropped onto it from a couple of inches, a large ring of delamination at the interface was observed. The delamination damage was often accompanied by severe shattering in the acrylic substratum. Damage patterns in the acrylic layer include radial and ring cracks and, together with delamination at the interface, may cause peeling-off of acrylic material from the sandwich plate. Theory of stress-wave propagation can be used to explain these damage patterns. The impact tests were conducted at various temperatures. The results also show clearly that temperature effect is very important in impact damage. For pure cast acrylic nil-ductile transition (NDT) occurs between 185-195 F. Excessive impact energy was dissipated into fracture energy when tested at temperature below this range or through plastic deformation when tested at temperature above the NDT temperature. Results from this study will be used as baseline data for studying fiber-metal laminates, such as GLARE and ARALL for advanced aeronautical and astronautical applications.

  1. Bilateral Trade and SEE–Eurozone Countries Growth Rate Alignment

    Directory of Open Access Journals (Sweden)

    Valerija Botrić

    2016-06-01

    Full Text Available The aim of the paper is to explore the role of trade in aligning the synchronisation patterns between the South Eastern European (see countries – Albania, Bosnia and Herzegovina, Bulgaria, Croatia, FYR of Macedonia, Kosovo, Montenegro, Romania and Serbia – and members of the euro area. More precisely, we investigate whether bilateral trade flows affect output synchronisation between the euro area countries and see countries and compare trade-synchronisation patterns between the see countries and new member states that have not yet introduced the euro (NMS. The results show that the levels of output similarities between the see countries and NMS are different and that the see countries exhibit lower output correlation with the euro area members than the NMS. Exploring the role of trade in aligning growth patterns has in some cases found positive effects, much stronger for the see countries, which have lower trade intensity levels. We argue that the reason for these results is related to the fact that other factors could be dominant in the NMS countries (policy measures alignment within the EU, while for the see countries only trade relationships had the opportunity to exert noticeable effects in the analysed period.

  2. Growth-Phase Sterigmatocystin Formation on Lactose Is Mediated via Low Specific Growth Rates in Aspergillus nidulans

    Directory of Open Access Journals (Sweden)

    Zoltán Németh

    2016-11-01

    Full Text Available Seed contamination with polyketide mycotoxins such as sterigmatocystin (ST produced by Aspergilli is a worldwide issue. The ST biosynthetic pathway is well-characterized in A. nidulans, but regulatory aspects related to the carbon source are still enigmatic. This is particularly true for lactose, inasmuch as some ST production mutant strains still synthesize ST on lactose but not on other carbon substrates. Here, kinetic data revealed that on d-glucose, ST forms only after the sugar is depleted from the medium, while on lactose, ST appears when most of the carbon source is still available. Biomass-specified ST production on lactose was significantly higher than on d-glucose, suggesting that ST formation may either be mediated by a carbon catabolite regulatory mechanism, or induced by low specific growth rates attainable on lactose. These hypotheses were tested by d-glucose limited chemostat-type continuous fermentations. No ST formed at a high growth rate, while a low growth rate led to the formation of 0.4 mg·L−1 ST. Similar results were obtained with a CreA mutant strain. We concluded that low specific growth rates may be the primary cause of mid-growth ST formation on lactose in A. nidulans, and that carbon utilization rates likely play a general regulatory role during biosynthesis.

  3. Growth rates and energy intake of hand-reared cheetah cubs (Acinonyx jubatus) in South Africa.

    Science.gov (United States)

    Bell, K M; Rutherfurd, S M; Morton, R H

    2012-04-01

    Growth rate is an important factor in neonatal survival. The aim of this study was to determine growth rates in hand-reared cheetah cubs in South Africa fed a prescribed energy intake, calculated for growth in the domestic cat. Growth was then compared with previously published data from hand-reared cubs in North America and the relationship between growth and energy intake explored. Daily body weight (BW) gain, feed and energy intake data was collected from 18 hand-reared cheetah cubs up to 120 days of age. The average pre-weaning growth rate was 32 g/day, which is lower than reported in mother-reared cubs and hand-reared cubs in North American facilities. However, post-weaning growth increased to an average of 55 g/day. Growth was approximately linear prior to weaning, but over the entire age range it exhibited a sigmoidal shape with an asymptotic plateau averaging 57 kg. Energy intake associated with pre-weaning growth was 481 kJ ME/kg BW(0.75). Regression analysis described the relationship between metabolic BW, metabolisable energy (ME) intake, and hence daily weight gain. This relationship may be useful in predicting energy intake required to achieve growth rates in hand-reared cheetah cubs similar to those observed for their mother-reared counterparts. © 2011 Blackwell Verlag GmbH.

  4. A NOVEL PARAMETER FOR EVALUATING THE FATIGUE CRACK GROWTH RATE IN CARBON STEELS

    Institute of Scientific and Technical Information of China (English)

    X.S.Wang; S.Q.Zhu; N.Kawagoishi; H.Nisitani

    2001-01-01

    A novel parameter is suggested for evaluating the fatigue crack growth rate in carbonsteels.Fatigue crack propagation tests of an annealed 0.42% carbon steel were carriedout under different conditions to investigate the relationship between this dominatingparameter and the crack opening displacement (COD).A new equation of fatiguecrack growth rate is formulated in terms of the suggested parameter.The physicalmeanings of the material parameters in this equation are explored experimentally.Considering the relation of crack growth and deformation properties,a simple andapplicable method is proposed to evaluate the fatigue crack growth rate.It is alsoobserved that the material parameters in the fatigue crack growth rate equation ofcarbon steels are related linearly to the material strength.The results are in a goodagreement with experimental results.

  5. Temperature responses of substrate carbon conversion efficiencies and growth rates of plant tissues.

    Science.gov (United States)

    Hansen, Lee D; Thomas, Nathan R; Arnholdt-Schmitt, Birgit

    2009-12-01

    Growth rates of plant tissues depend on both the respiration rate and the efficiency with which carbon is incorporated into new structural biomass. Calorespirometric measurement of respiratory heat and CO2 rates, from which both efficiency and growth rate can be calculated, is a well established method for determining the effects of rapid temperature changes on the respiratory and growth properties of plant tissues. The effect of the alternative oxidase/cytochrome oxidase activity ratio on efficiency is calculated from first principles. Data on the temperature dependence of the substrate carbon conversion efficiency are tabulated. These data show that epsilon is maximum and approximately constant through the optimum growth temperature range and decreases rapidly as temperatures approach temperature limits to growth. The width of the maximum and the slopes of decreasing epsilon at high and low temperatures vary greatly with species, cultivars and accessions.

  6. Growth rate hypothesis and efficiency of protein synthesis under different sulphate concentrations in two green algae.

    Science.gov (United States)

    Giordano, Mario; Palmucci, Matteo; Raven, John A

    2015-11-01

    The growth rate hypothesis (GRH) predicts a positive correlation between growth rate and RNA content because growth depends upon the protein synthesis machinery. The application of this hypothesis to photoautotrophic organisms has been questioned. We tested the GRH on one prasinophycean, Tetraselmis suecica, and one chlorophycean, Dunaliella salina, grown at three sulphate concentrations. Sulphate was chosen because its concentration in the oceans increased through geological time and apparently had a role in the evolutionary trajectories of phytoplankton. Cell protein content and P quota were positively related to the RNA content (r = 0.62 and r = 0.74, respectively). The correlation of the RNA content with growth rates (r = 0.95) indicates that the GRH was valid for these species when growth rates were below 0.82 d(-1) .

  7. About supersaturation and growth rates of hydrargillite Al(OH) 3 in alumina caustic solutions

    Science.gov (United States)

    Veesler, Stéphane; Boistelle, Roland

    1993-06-01

    Growth rates of hydrargillite crystals, Al(OH) 3, growing from concentrated caustic solutions, are traditionally plotted and discussed as a function of the difference between actual concentration and solubility of alumina. This way to express supersaturation is probably due to practical or technical reasons, as hydrargillite is mainly grown in industrial plants. However, as the solubility of hydrargillite is greatly affected by the presence of caustic soda there are as many growth rate curves as there are solutions at different soda concentrations, if supersaturation is expressed as a concentration difference. In the present paper we show that all growth rates, measured in different caustic solutions, lie on a single curve if supersaturation is normalized with respect to solubility, i.e. expressed as a ratio of actual concentration over solubility. Accordingly, growth rates become independent of the caustic concentrations when growth takes place at the same supersaturation.

  8. ppGpp is the major source of growth rate control in E. coli.

    Science.gov (United States)

    Potrykus, Katarzyna; Murphy, Helen; Philippe, Nadège; Cashel, Michael

    2011-03-01

    It is widely accepted that the DNA, RNA and protein content of Enterobacteriaceae is regulated as a function of exponential growth rates; macromolecular content increases with faster growth regardless of specific composition of the growth medium. This phenomenon, called growth rate control, primarily involves regulation of ribosomal RNA and ribosomal protein synthesis. However, it was uncertain whether the global regulator ppGpp is the major determinant for growth rate control. Therefore, here we re-evaluate the effect of ppGpp on macromolecular content for different balanced growth rates in defined media. We find that when ppGpp is absent, RNA/protein and RNA/DNA ratios are equivalent in fast and slow growing cells. Moreover, slow growing ppGpp-deficient cells with increased RNA content, display a normal ribosomal subunit composition although polysome content is reduced when compared with fast growing wild-type cells. From this we conclude that growth rate control does not occur in the absence of ppGpp. Also, artificial elevation of ppGpp or introduction of stringent RNA polymerase mutants in ppGpp-deficient cells restores this control. We believe these findings strongly argue in favour of ppGpp and against redundant regulation of growth rate control by other factors in Escherichia coli and other enteric bacteria.

  9. Magnesite growth rates as a function of temperature and saturation state

    Science.gov (United States)

    Saldi, Giuseppe D.; Jordan, Guntram; Schott, Jacques; Oelkers, Eric H.

    2009-10-01

    Magnesite growth rates and step velocities have been measured systematically as a function of temperature from 80 to 105 °C and saturation state in 0.1 M NaCl solutions using hydrothermal atomic force microscopy (HAFM). The observations indicate that at these conditions magnesite precipitation is dominated by the coupling of step generation via spiral growth at screw dislocations and step advancement away from these dislocations. As these two processes occur in series the slowest of these dominates precipitation rates. At 100 °C magnesite growth rates ( r) determined by HAFM are consistent with r=k(Ω-1)2, where k is a constant equal to 6.5 × 10 -16 mol/cm 2/s and Ω is the saturation index with respect to magnesite. This equation is consistent with spiral growth step generation controlling magnesite precipitation rates. Corresponding magnesite precipitation rates measured using mixed-flow reactors are shown to be consistent with both the rates measured by HAFM and the spiral growth theory, confirming the rate limiting mechanism. Step advancement, however, is observed to slow far faster than step generation with decreasing temperature; the activation energy for step advancement is 159 kJ/mol whereas step generation rates have an estimated activation energy of ˜60 kJ/mol. As such, it seems likely that at ambient temperatures magnesite growth is limited by very slow step advancement rates.

  10. Growth pattern and carcase development in male ducks selected for growth rate.

    Science.gov (United States)

    Maruyama, K; Akbar, M K; Turk, C M

    1999-05-01

    1. Growth patterns of the whole body, eviscerated carcases, breast muscle, leg and thigh muscles and abdominal fat pads were compared in 4 lines (Lines A, B, C, and D) of male ducks selected for market weight (n = 1305) using growth curve analysis, allometric growth analysis and repeated measure analysis. At 49 d of age, Line A was heaviest, followed by Line B, Line C and Line D. 2. Ducks were fed ad libitum under 24-h lighting and 12 or 24 ducks were killed to determine body, carcase, breast-muscle, leg and thigh-muscle, and abdominal fat weights at time points from hatching until 53 d of age. 3. The Weibull function was chosen for growth curve analysis. The asymptote and inflection point from the Weibull growth curves identified 3 lines (Lines B, C, and D) with discrete body and carcase growth patterns but did not distinguish Line A from Line B. In all 4 lines the asymptote ranged from 4437 g to 3008 g for body weight and from 3334 g to 2098 g for carcase weight; the inflection point ranged from 22.5 d to 25.3 d for body weight and from 25.4 d to 29.6 d for carcase weight. 4. The allometric growth coefficient, relative to whole-body growth, was higher than 1.00 for breast muscle and lower than 1.00 for leg and thigh muscles during from 4 d to 53 d of age. 5. Body fat accumulation was estimated by abdominal fat. Line D accumulated more abdominal fat than other lines. The pattern of fat accumulation in Line D was different from Lines A, B and C and there were no differences between Lines A, B and C.

  11. Synthesis of mullite nanometers microwave from bentonite delaminated; Sintese de mulita nanometrica por microondas a partir bentonitas delaminadas

    Energy Technology Data Exchange (ETDEWEB)

    Gomes, J.; Azevedo, N.A.; Vieira, D.A.; Neves, G.A.; Santana, L.N.L., E-mail: josileido@yahoo.com.br [Universidade Federal de Campina Grande (UFCG), PB (Brazil); Menezes, R.R. [Universidade Federal da Paraiba (UFPB), PB (Brazil)

    2011-07-01

    The smectite clays present as lamellar structure is formed by two layers of silica tetrahedrons and one layer of aluminum octahedra, which can be individually delaminated, reaching a thickness of about 1mm. Mullite is the only thermodynamically stable crystalline phase of SiO{sub 2} and Al2O{sub 3} system and can be synthesized from minerals that exhibit these oxides in its composition. The microwave synthesis offers advantages over conventional methods, the heating is rapid and uniform, avoiding an undesirable grain growth. This study aims to obtain nanometric mullite from bentonites delamined subjected to microwave heating. The samples were initially treated, then rehydrated, frozen and deagglomeration in a ball mill for 4 and 8 hours. Subsequently subjected to centrifugation, drying and microwave heating. The results showed that nano-mullite was obtained for samples subjected to longer heating and dispersions. (author)

  12. The Impact of Real Exchange Rate on Economic Growth in Albania

    Directory of Open Access Journals (Sweden)

    Edmira Cakrani

    2014-02-01

    Full Text Available Real exchange rate is one of the most important economic variables, especially in today's conditions of integration processes, the removal of trade barriers and increasing direct competition between countries. Real exchange rate affects economy, through its impact on key economic variables, such as employment, inflation and especially economic growth. Changes in the real exchange rate affect the competitiveness of domestic products, resulting in increased exports or imports, affecting trade balance e growth. Also changes in the real exchange rate affect investment and capital accumulation, which are directly linked with economic growth. The aim of this paper is to study the possible impact of the real exchange rate on economic growth in Albania, to answer the question whether the real exchange rate can be used as an instrument of policy. Johansen cointegration method and Vector Error Correction Model is used in this paper to identify the longterm and short-term impact of real exchange rate on economic growth in Albania. Results of the study indicate that the real exchange rate has no significant impact on the Albanian economy, suggesting that policies to promote economic growth, both in the short and long term should not rely on this variable.

  13. Estimating blue whale skin isotopic incorporation rates and baleen growth rates: Implications for assessing diet and movement patterns in mysticetes.

    Science.gov (United States)

    Busquets-Vass, Geraldine; Newsome, Seth D; Calambokidis, John; Serra-Valente, Gabriela; Jacobsen, Jeff K; Aguíñiga-García, Sergio; Gendron, Diane

    2017-01-01

    Stable isotope analysis in mysticete skin and baleen plates has been repeatedly used to assess diet and movement patterns. Accurate interpretation of isotope data depends on understanding isotopic incorporation rates for metabolically active tissues and growth rates for metabolically inert tissues. The aim of this research was to estimate isotopic incorporation rates in blue whale skin and baleen growth rates by using natural gradients in baseline isotope values between oceanic regions. Nitrogen (δ15N) and carbon (δ13C) isotope values of blue whale skin and potential prey were analyzed from three foraging zones (Gulf of California, California Current System, and Costa Rica Dome) in the northeast Pacific from 1996-2015. We also measured δ15N and δ13C values along the lengths of baleen plates collected from six blue whales stranded in the 1980s and 2000s. Skin was separated into three strata: basale, externum, and sloughed skin. A mean (±SD) skin isotopic incorporation rate of 163±91 days was estimated by fitting a generalized additive model of the seasonal trend in δ15N values of skin strata collected in the Gulf of California and the California Current System. A mean (±SD) baleen growth rate of 15.5±2.2 cm y-1 was estimated by using seasonal oscillations in δ15N values from three whales. These oscillations also showed that individual whales have a high fidelity to distinct foraging zones in the northeast Pacific across years. The absence of oscillations in δ15N values of baleen sub-samples from three male whales suggests these individuals remained within a specific zone for several years prior to death. δ13C values of both whale tissues (skin and baleen) and potential prey were not distinct among foraging zones. Our results highlight the importance of considering tissue isotopic incorporation and growth rates when studying migratory mysticetes and provide new insights into the individual movement strategies of blue whales.

  14. Geographic after-tax real income differentials and population growth rates.

    Science.gov (United States)

    Alexander, G; Cebula, R J; Koch, J V

    1990-03-01

    "The purpose of this [one-page] note is to empirically investigate the impact of geographic after-tax real income differentials on geographic population growth rate differentials. The focus is on population growth rates in Florida's 67 counties over the period 1980-88." The authors conclude that "even after allowing for a variety of other location-influencing factors, including coastal access, after-tax real income differentials exercise a positive and significant impact on population growth rate differentials among Florida's counties."

  15. Determination of growth rates as an input of the stock discount valuation models

    Directory of Open Access Journals (Sweden)

    Momčilović Mirela

    2013-01-01

    Full Text Available When determining the value of the stocks with different stock discount valuation models, one of the important inputs is expected growth rate of dividends, earnings, cash flows and other relevant parameters of the company. Growth rate can be determined by three basic ways, and those are: on the basis of extrapolation of historical data, on the basis of professional assessment of the analytics who follow business of the company and on the basis of fundamental indicators of the company. Aim of this paper is to depict theoretical basis and practical application of stated methods for growth rate determination, and to indicate their advantages, or deficiencies.

  16. Growth rate enhancement of free-electron laser by two consecutive wigglers with axial magnetic field

    Indian Academy of Sciences (India)

    A Hasanbeigi; A Farhadian; E Khademi Bidhendi

    2014-06-01

    The operative mechanism for a free-electron laser (FEL) with two consecutive helical wigglers having opposite circular polarization in the presence of an axial magnetic field is proposed and analysed. With the help of fluid theory, a tenth-degree polynomial dispersion equation for electromagnetic and space-charge waves is derived. The results are used to illustrate and discuss the dependence of growth rate on different system parameters. Finally, it is shown that for the same system parameters the growth rate of the proposed structure is more than the growth rate of instability in a conventional FEL.

  17. Do firms share the same functional form of their growth rate distribution? A new statistical test

    CERN Document Server

    Lunardi, Josè T; Lillo, Fabrizio; Mantegna, Rosario N; Gallegati, Mauro

    2011-01-01

    We introduce a new statistical test of the hypothesis that a balanced panel of firms have the same growth rate distribution or, more generally, that they share the same functional form of growth rate distribution. We applied the test to European Union and US publicly quoted manufacturing firms data, considering functional forms belonging to the Subbotin family of distributions. While our hypotheses are rejected for the vast majority of sets at the sector level, we cannot rejected them at the subsector level, indicating that homogenous panels of firms could be described by a common functional form of growth rate distribution.

  18. Ecological regime shift drives declining growth rates of sea turtles throughout the West Atlantic

    Science.gov (United States)

    Bjorndal, Karen A.; Bolten, Alan B.; Chaloupka, Milani; Saba, Vincent S.; Bellini, Cláudio; Marcovaldi, Maria A.G.; Santos, Armando J.B.; Bortolon, Luis Felipe Wurdig; Meylan, Anne B.; Meylan, Peter A.; Gray, Jennifer; Hardy, Robert; Brost, Beth; Bresette, Michael; Gorham, Jonathan C.; Connett, Stephen; Crouchley, Barbara Van Sciver; Dawson, Mike; Hayes, Deborah; Diez, Carlos E.; van Dam, Robert P.; Willis, Sue; Nava, Mabel; Hart, Kristen M.; Cherkiss, Michael S.; Crowder, Andrew; Pollock, Clayton; Hillis-Starr, Zandy; Muñoz Tenería, Fernando A.; Herrera-Pavón, Roberto; Labrada-Martagón, Vanessa; Lorences, Armando; Negrete-Philippe, Ana; Lamont, Margaret M.; Foley, Allen M.; Bailey, Rhonda; Carthy, Raymond R.; Scarpino, Russell; McMichael, Erin; Provancha, Jane A.; Brooks, Annabelle; Jardim, Adriana; López-Mendilaharsu, Milagros; González-Paredes, Daniel; Estrades, Andrés; Fallabrino, Alejandro; Martínez-Souza, Gustavo; Vélez-Rubio, Gabriela M.; Boulon, Ralf H.; Collazo, Jaime; Wershoven, Robert; Hernández, Vicente Guzmán; Stringell, Thomas B.; Sanghera, Amdeep; Richardson, Peter B.; Broderick, Annette C.; Phillips, Quinton; Calosso, Marta C.; Claydon, John A.B.; Metz, Tasha L.; Gordon, Amanda L.; Landry, Andre M.; Shaver, Donna J.; Blumenthal, Janice; Collyer, Lucy; Godley, Brendan J.; McGowan, Andrew; Witt, Matthew J.; Campbell, Cathi L.; Lagueux, Cynthia J.; Bethel, Thomas L.; Kenyon, Lory

    2017-01-01

    Somatic growth is an integrated, individual-based response to environmental conditions, especially in ectotherms. Growth dynamics of large, mobile animals are particularly useful as bio-indicators of environmental change at regional scales. We assembled growth rate data from throughout the West Atlantic for green turtles, Chelonia mydas, which are long-lived, highly migratory, primarily herbivorous mega-consumers that may migrate over hundreds to thousands of kilometers. Our dataset, the largest ever compiled for sea turtles, has 9690 growth increments from 30 sites from Bermuda to Uruguay from 1973 to 2015. Using generalized additive mixed models, we evaluated covariates that could affect growth rates; body size, diet, and year have significant effects on growth. Growth increases in early years until 1999, then declines by 26% to 2015. The temporal (year) effect is of particular interest because two carnivorous species of sea turtles – hawksbills, Eretmochelys imbricata, and loggerheads, Caretta caretta – exhibited similar significant declines in growth rates starting in 1997 in the West Atlantic, based on previous studies. These synchronous declines in productivity among three sea turtle species across a trophic spectrum provide strong evidence that an ecological regime shift (ERS) in the Atlantic is driving growth dynamics. The ERS resulted from a synergy of the 1997/1998 El Niño Southern Oscillation (ENSO) – the strongest on record – combined with an unprecedented warming rate over the last two to three decades. Further support is provided by the strong correlations between annualized mean growth rates of green turtles and both sea surface temperatures (SST) in the West Atlantic for years of declining growth rates (r = -0.94) and the Multivariate ENSO Index (MEI) for all years (r = 0.74). Granger-causality analysis also supports the latter finding. We discuss multiple stressors that could reinforce and prolong the effect of the ERS. This study

  19. Daily changes in temperature, not the circadian clock, regulate growth rate in Brachypodium distachyon.

    Directory of Open Access Journals (Sweden)

    Dominick A Matos

    Full Text Available Plant growth is commonly regulated by external cues such as light, temperature, water availability, and internal cues generated by the circadian clock. Changes in the rate of growth within the course of a day have been observed in the leaves, stems, and roots of numerous species. However, the relative impact of the circadian clock on the growth of grasses has not been thoroughly characterized. We examined the influence of diurnal temperature and light changes, and that of the circadian clock on leaf length growth patterns in Brachypodium distachyon using high-resolution time-lapse imaging. Pronounced changes in growth rate were observed under combined photocyles and thermocycles or with thermocycles alone. A considerably more rapid growth rate was observed at 28°C than 12°C, irrespective of the presence or absence of light. In spite of clear circadian clock regulated gene expression, plants exhibited no change in growth rate under conditions of constant light and temperature, and little or no effect under photocycles alone. Therefore, temperature appears to be the primary cue influencing observed oscillations in growth rate and not the circadian clock or photoreceptor activity. Furthermore, the size of the leaf meristem and final cell length did not change in response to changes in temperature. Therefore, the nearly five-fold difference in growth rate observed across thermocycles can be attributed to proportionate changes in the rate of cell division and expansion. A better understanding of the growth cues in B. distachyon will further our ability to model metabolism and biomass accumulation in grasses.

  20. Daily changes in temperature, not the circadian clock, regulate growth rate in Brachypodium distachyon.

    Science.gov (United States)

    Matos, Dominick A; Cole, Benjamin J; Whitney, Ian P; MacKinnon, Kirk J-M; Kay, Steve A; Hazen, Samuel P

    2014-01-01

    Plant growth is commonly regulated by external cues such as light, temperature, water availability, and internal cues generated by the circadian clock. Changes in the rate of growth within the course of a day have been observed in the leaves, stems, and roots of numerous species. However, the relative impact of the circadian clock on the growth of grasses has not been thoroughly characterized. We examined the influence of diurnal temperature and light changes, and that of the circadian clock on leaf length growth patterns in Brachypodium distachyon using high-resolution time-lapse imaging. Pronounced changes in growth rate were observed under combined photocyles and thermocycles or with thermocycles alone. A considerably more rapid growth rate was observed at 28°C than 12°C, irrespective of the presence or absence of light. In spite of clear circadian clock regulated gene expression, plants exhibited no change in growth rate under conditions of constant light and temperature, and little or no effect under photocycles alone. Therefore, temperature appears to be the primary cue influencing observed oscillations in growth rate and not the circadian clock or photoreceptor activity. Furthermore, the size of the leaf meristem and final cell length did not change in response to changes in temperature. Therefore, the nearly five-fold difference in growth rate observed across thermocycles can be attributed to proportionate changes in the rate of cell division and expansion. A better understanding of the growth cues in B. distachyon will further our ability to model metabolism and biomass accumulation in grasses.

  1. Follow-up of children and adolescents with short stature: the importance of the growth rate

    Directory of Open Access Journals (Sweden)

    Maria Wany Louzada Strufaldi

    Full Text Available CONTEXT AND OBJECTIVE: Short stature is defined as a height of more than two standard deviations below the average for a given age and sex in a reference population. The objective was to describe follow-up conducted among short-stature children and adolescents. DESIGN AND SETTING: Descriptive study, at the Growth outpatient clinic, Department of Pediatrics, Universidade Federal de São Paulo. METHODS: The study included 152 patients aged 2 to 15 years who had height for age of less than P5, on the National Center for Health Statistics curve. The children underwent nutritional evaluation, and several variables relating to height and growth rate were calculated to establish etiological diagnosis. Bone age was evaluated by X-ray. RESULTS: The majority (63.2% were male. In 77.8%, the stature observed was within the family pattern. Among the 99 patients followed up for more than 6 months, 17.2% presented inadequate growth rates. The preponderant etiological diagnosis for short stature was familial/constitutional in 58.6% of the cases; 27 patients (34.2% with adequate growth rate presented bone age alterations. Even with inadequate growth rates, 75% of such patients had a normal result from growth hormone stimulation testing. Close to 90% of patients with a diagnosis of short stature of familial/constitutional origin and intrauterine growth retardation presented adequate growth rate. The genetic etiology was significantly characteristic of patients with inadequate growth rate. CONCLUSION: Growth rate assessment must form part of the investigation and follow-up of short-stature cases. However, its utilization and validity should form part of an overall view of each patient.

  2. Diameter growth rates in tropical dry forests: contributions to the sustainable management of forests in the Bolivian Cerrado biogeographical province

    NARCIS (Netherlands)

    Lopez, L.; Villalba, R.; Peña-Claros, M.

    2012-01-01

    Growth ring variations were used to provide the rates in diameter growth for seven tree species in the Bolivian Cerrado biogeographical province. Ten to 50 trees were measured per species. Ring width measurements provided accurate data on the rates of tree growth. Variations in growth rates were det

  3. Crack growth rate in core shroud horizontal welds using two models for a BWR

    Energy Technology Data Exchange (ETDEWEB)

    Arganis Juárez, C.R., E-mail: carlos.arganis@inin.gob.mx; Hernández Callejas, R.; Medina Almazán, A.L.

    2015-05-15

    Highlights: • Two models were used to predict SCC growth rate in a core shroud of a BWR. • A weld residual stress distribution with 30% stress relaxation by neutron was used. • Agreement is shown between the measurements of SCC growth rate and the predictions. • Slip–oxidation model is better at low fluences and empirical model at high fluences. - Abstract: An empirical crack growth rate correlation model and a predictive model based on the slip–oxidation mechanism for Stress Corrosion Cracking (SCC) were used to calculate the crack growth rate in a BWR core shroud. In this study, the crack growth rate was calculated by accounting for the environmental factors related to aqueous environment, neutron irradiation to high fluence and the complex residual stress conditions resulting from welding. In estimating the SCC behavior the crack growth measurements data from a Boiling Water Reactor (BWR) plant are referred to, and the stress intensity factor vs crack depth throughout thickness is calculated using a generic weld residual stress distribution for a core shroud, with a 30% stress relaxation induced by neutron irradiation. Quantitative agreement is shown between the measurements of SCC growth rate and the predictions of the slip–oxidation mechanism model for relatively low fluences (5 × 10{sup 24} n/m{sup 2}), and the empirical model predicted better the SCC growth rate than the slip–oxidation model for high fluences (>1 × 10{sup 25} n/m{sup 2}). The relevance of the models predictions for SCC growth rate behavior depends on knowing the model parameters.

  4. Growth against entropy in bacterial metabolism: the phenotypic trade-off behind empirical growth rate distributions in E. coli

    Science.gov (United States)

    De Martino, Daniele; Capuani, Fabrizio; De Martino, Andrea

    2016-06-01

    The solution space of genome-scale models of cellular metabolism provides a map between physically viable flux configurations and cellular metabolic phenotypes described, at the most basic level, by the corresponding growth rates. By sampling the solution space of E. coli's metabolic network, we show that empirical growth rate distributions recently obtained in experiments at single-cell resolution can be explained in terms of a trade-off between the higher fitness of fast-growing phenotypes and the higher entropy of slow-growing ones. Based on this, we propose a minimal model for the evolution of a large bacterial population that captures this trade-off. The scaling relationships observed in experiments encode, in such frameworks, for the same distance from the maximum achievable growth rate, the same degree of growth rate maximization, and/or the same rate of phenotypic change. Being grounded on genome-scale metabolic network reconstructions, these results allow for multiple implications and extensions in spite of the underlying conceptual simplicity.

  5. Effects of Phlomis umbrosa Root on Longitudinal Bone Growth Rate in Adolescent Female Rats.

    Science.gov (United States)

    Lee, Donghun; Kim, Young-Sik; Song, Jungbin; Kim, Hyun Soo; Lee, Hyun Jung; Guo, Hailing; Kim, Hocheol

    2016-04-07

    This study aimed to investigate the effects of Phlomis umbrosa root on bone growth and growth mediators in rats. Female adolescent rats were administered P. umbrosa extract, recombinant human growth hormone or vehicle for 10 days. Tetracycline was injected intraperitoneally to produce a glowing fluorescence band on the newly formed bone on day 8, and 5-bromo-2'-deoxyuridine was injected to label proliferating chondrocytes on days 8-10. To assess possible endocrine or autocrine/paracrine mechanisms, we evaluated insulin-like growth factor-1 (IGF-1), insulin-like growth factor binding protein-3 (IGFBP-3) or bone morphogenetic protein-2 (BMP-2) in response to P. umbrosa administration in either growth plate or serum. Oral administration of P. umbrosa significantly increased longitudinal bone growth rate, height of hypertrophic zone and chondrocyte proliferation of the proximal tibial growth plate. P. umbrosa also increased serum IGFBP-3 levels and upregulated the expressions of IGF-1 and BMP-2 in growth plate. In conclusion, P. umbrosa increases longitudinal bone growth rate by stimulating proliferation and hypertrophy of chondrocyte with the increment of circulating IGFBP-3. Regarding the immunohistochemical study, the effect of P. umbrosa may also be attributable to upregulation of local IGF-1 and BMP-2 expressions in the growth plate, which can be considered as a GH dependent autocrine/paracrine pathway.

  6. Effects of Phlomis umbrosa Root on Longitudinal Bone Growth Rate in Adolescent Female Rats

    Directory of Open Access Journals (Sweden)

    Donghun Lee

    2016-04-01

    Full Text Available This study aimed to investigate the effects of Phlomis umbrosa root on bone growth and growth mediators in rats. Female adolescent rats were administered P. umbrosa extract, recombinant human growth hormone or vehicle for 10 days. Tetracycline was injected intraperitoneally to produce a glowing fluorescence band on the newly formed bone on day 8, and 5-bromo-2′-deoxyuridine was injected to label proliferating chondrocytes on days 8–10. To assess possible endocrine or autocrine/paracrine mechanisms, we evaluated insulin-like growth factor-1 (IGF-1, insulin-like growth factor binding protein-3 (IGFBP-3 or bone morphogenetic protein-2 (BMP-2 in response to P. umbrosa administration in either growth plate or serum. Oral administration of P. umbrosa significantly increased longitudinal bone growth rate, height of hypertrophic zone and chondrocyte proliferation of the proximal tibial growth plate. P. umbrosa also increased serum IGFBP-3 levels and upregulated the expressions of IGF-1 and BMP-2 in growth plate. In conclusion, P. umbrosa increases longitudinal bone growth rate by stimulating proliferation and hypertrophy of chondrocyte with the increment of circulating IGFBP-3. Regarding the immunohistochemical study, the effect of P. umbrosa may also be attributable to upregulation of local IGF-1 and BMP-2 expressions in the growth plate, which can be considered as a GH dependent autocrine/paracrine pathway.

  7. A panel data investigation of real exchange rate misalignment and growth

    Directory of Open Access Journals (Sweden)

    Flávio Vilela Vieira

    2012-09-01

    Full Text Available The paper investigates the role of real exchange rate misalignment on long-run growth for a set of ninety countries using time series data from 1980 to 2004. We first estimate a panel data model (fixed and random effects for the real exchange rate in order to produce estimates of the equilibrium real exchange rate and this is then used to construct measures of real exchange rate misalignment. We provide an alternative set of estimates of RER misalignment using panel cointegration methods. The results for the two-step System GMM panel growth models indicate that the coefficients for real exchange rate misalignment are positive for different model specification and samples, which means that a more depreciated (appreciated real exchange rate helps (harms long-run growth. The estimated coefficients are higher for developing and emerging countries.

  8. Effects of Delaminations on the Damped Dynamic Characteristics of Composite Laminates: Mechanics and Experiments

    Science.gov (United States)

    Saravanos, D. A.; Hopkins, D. A.

    1995-01-01

    Analytical and experimental work is presented on the damped free-vibration of delaminated laminates and beams. A laminate theory is developed where the unknown kinematic perturbations induced by a delamination crack are treated as additional degrees of freedom. The generalized stiffness, inertia and damping matrices of the laminate are formulated. An analytical solution is developed for the prediction of natural frequencies, modes and modal damping in composite beams with delamination cracks. Evaluations of the mechanics on various cantilever beams with a central delamination are performed. Experimental results for the modal frequencies and damping of composite beams with a single delamination are also presented and correlations between analytical predictions and measured data are shown. The effects of delamination vary based on crack size, laminate configuration, and mode order. The implications of the mechanics in developing delamination detection techniques are also discussed.

  9. The Effects of Population Density on Juvenile Growth Rate in White-Tailed Deer

    Science.gov (United States)

    Barr, Brannon; Wolverton, Steve

    2014-10-01

    Animal body size is driven by habitat quality, food availability, and nutrition. Adult size can relate to birth weight, to length of the ontogenetic growth period, and/or to the rate of growth. Data requirements are high for studying these growth mechanisms, but large datasets exist for some game species. In North America, large harvest datasets exist for white-tailed deer ( Odocoileus virginianus), but such data are collected under a variety of conditions and are generally dismissed for ecological research beyond local population and habitat management. We contend that such data are useful for studying the ecology of white-tailed deer growth and body size when analyzed at ordinal scale. In this paper, we test the response of growth rate to food availability by fitting a logarithmic equation that estimates growth rate only to harvest data from Fort Hood, Texas, and track changes in growth rate over time. Results of this ordinal scale model are compared to previously published models that include additional parameters, such as birth weight and adult weight. It is shown that body size responds to food availability by variation in growth rate. Models that estimate multiple parameters may not work with harvest data because they are prone to error, which renders estimates from complex models too variable to detect interannual changes in growth rate that this ordinal scale model captures. This model can be applied to harvest data, from which inferences about factors that influence animal growth and body size (e.g., habitat quality and nutritional availability) can be drawn.

  10. A cohesive finite element formulation for modelling fracture and delamination in solids

    Indian Academy of Sciences (India)

    S Roy Chowdhury; R Narasimhan

    2000-12-01

    In recent years, cohesive zone models have been employed to simulate fracture and delamination in solids. This paper presents in detail the formulation for incorporating cohesive zone models within the framework of a large deformation finite element procedure. A special Ritz-finite element technique is employed to control nodal instabilities that may arise when the cohesive elements experience material softening and lose their stress carrying capacity. A few simple problems are presented to validate the implementation of the cohesive element formulation and to demonstrate the robustness of the Ritz solution method. Finally, quasi-static crack growth along the interface in an adhesively bonded system is simulated employing the cohesive zone model. The crack growth resistance curves obtained from the simulations show trends similar to those observed in experimental studies.

  11. A Simulation Method for High-Cycle Fatigue-Driven Delamination using a Cohesive Zone Model

    DEFF Research Database (Denmark)

    Bak, Brian Lau Verndal; Turon, A.; Lindgaard, Esben;

    2016-01-01

    on parameter fitting of any kind. The method has been implemented as a zero-thickness eight-node interface element for Abaqus and as a spring element for a simple finite element model in MATLAB. The method has been validated in simulations of mode I, mode II, and mixed-mode crack loading for both self......A novel computational method for simulating fatigue-driven mixed-mode delamination cracks in laminated structures under cyclic loading is presented. The proposed fatigue method is based on linking a cohesive zone model for quasi-static crack growth and a Paris' law-like model described......-similar and non-self-similar crack propagation. The method produces highly accurate results compared with currently available methods and is capable of simulating general mixed-mode non-self-similar crack growth problems....

  12. In situ growth rates of deep-water octocorals determined from 3D photogrammetric reconstructions

    Science.gov (United States)

    Bennecke, Swaantje; Kwasnitschka, Tom; Metaxas, Anna; Dullo, Wolf-Christian

    2016-12-01

    Growth rates of deep-water corals provide important information on the recovery potential of these ecosystems, for example from fisheries-induced impacts. Here, we present in situ growth dynamics that are currently largely unknown for deep-water octocorals, calculated by applying a non-destructive method. Videos of a boulder harbouring multiple colonies of Paragorgia arborea and Primnoa resedaeformis in the Northeast Channel Coral Conservation Area at the entrance to the Gulf of Maine at 863 m depth were collected in 2006, 2010 and 2014. Photogrammetric reconstructions of the boulder and the fauna yielded georeferenced 3D models for all sampling years. Repeated measurements of total length and cross-sectional area of the same colonies allowed the observation of growth dynamics. Growth rates of total length of Paragorgia arborea decreased over time with higher rates between 2006 and 2010 than between 2010 and 2014, while growth rates of cross-sectional area remained comparatively constant. A general trend of decreasing growth rates of total length with size of the coral colony was documented. While no growth was observed for the largest colony (165 cm in length) between 2010 and 2014, a colony 50-65 cm in length grew 3.7 cm yr-1 between 2006 and 2010. Minimum growth rates of 1.6-2.7 cm yr-1 were estimated for two recruits (<23 cm in 2014) of Primnoa resedaeformis. We successfully extracted biologically meaningful data from photogrammetric models and present the first in situ growth rates for these coral species in the Northwest Atlantic.

  13. Calorimetric control of the specific growth rate during fed-batch cultures of Saccharomyces cerevisiae.

    Science.gov (United States)

    Biener, Richard; Steinkämper, Anne; Horn, Thomas

    2012-08-31

    The specific growth rate of a Saccharomyces cerevisiae strain with glucose as limiting C-source was estimated from the measured heat flow produced by the cells. For the cultivation a standard 30 l laboratory bioreactor was used, which was extended in such a way that heat balancing is possible. The feed rate was adjusted by a feedforward/feedback controller such that the specific growth rate was kept on the desired set-point value. On the basis of experimental investigations it was demonstrated that the specific growth rate can be controlled at a given set point value below the critical value to prevent the production of growth-inhibitory ethanol due to the Crabtree effect. With this control strategy high biomass concentrations of more than 110 g l(-1) can be obtained. Copyright © 2012 Elsevier B.V. All rights reserved.

  14. Effects of the flow rate of hydrogen on the growth of graphene

    Institute of Scientific and Technical Information of China (English)

    Yong-gui Shi; Yue Hao; Dong Wang; Jin-cheng Zhang; Peng Zhang; Xue-fang Shi; Dang Han; Zheng Chai; Jing-dong Yan

    2015-01-01

    Graphene samples with different morphologies were fabricated on the inside of copper enclosures by low pressure chemical vapor deposition and tuning the flow rate of hydrogen. It is found that the flow rate of hydrogen greatly influences the growth of graphene. Ther-modynamic analysis indicates that a higher flow rate of hydrogen is favorable to the formation of good quality graphene with regular mor-phology. However, the mass-transfer process of methane dominates the growth driving force. At very low pressure, mass-transfer proceeds by Knudsen diffusion, and the mass-transfer flux of methane decreases as the flow rate of hydrogen increases, leading to a decrease in the growth driving force. At a higher pressure, mass-transfer proceeds by Fick’s diffusion, and the mass-transfer flux of methane is dominated by the gas velocity, whose variation determines the growth driving force variation of graphene.

  15. Modelling the effect of ethanol on growth rate of food spoilage moulds

    NARCIS (Netherlands)

    Dantigny, P.; Guilmart, A.; Radoi, F.; Bensoussan, M.; Zwietering, M.H.

    2005-01-01

    The effect of ethanol (E) on the radial growth rate (¿) of food spoilage moulds (Aspergillus candidus, Aspergillus flavus, Aspergillus niger, Cladosporium cladosporioides, Eurotium herbariorum, Mucor circinelloides, Mucor racemosus, Paecilomyces variotii, Penicillium chrysogenum, Penicillium digitat

  16. Dependence of growth rate of quartz in fused silica on pressure and impurity content

    Science.gov (United States)

    Fratello, V. J.; Hays, J. F.; Turnbull, D.

    1980-01-01

    The effects of pressure, temperature, and some variations in impurity content on the growth rate u of quartz into fused silica were measured. Under all conditions the growth rate was interface controlled and increased exponentially with pressure with an activation volume averaging -21.2 cu cm/mole. The activation enthalpy for all specimens is extrapolated to a zero pressure value of 64 kcal/mole, within the experimental uncertainty. At a given stoichiometry the effect of hydroxyl content on growth rate is described entirely by a linear term C(OH) in the prefactor of the equation for the growth rate. The effect of chlorine impurity can be described similarly. Also u is increased as the ideal stoichiometry is approached from the partially reduced state.

  17. Growth rates of alien Oreochromis niloticus and indigenous Oreochromis mortimeri in Lake Kariba, Zimbabwe

    NARCIS (Netherlands)

    Chifamba, P. C.; Videler, J. J.

    2014-01-01

    Growth rates of indigenous Oreochromis mortimeri and alien Oreochromis niloticus from Lake Kariba were estimated from samples collected in 1997-2000, 2003-2005 and 2010-2011. Growth zones on scales and otoliths of O. niloticus and on the otoliths and opercula of O. mortimeri were deposited annually.

  18. Mechanisms promoting higher growth rate in arctic than in temperate shorebirds

    NARCIS (Netherlands)

    Schekkerman, H; Tulp, Ingrid; Piersma, T.; Visser, G.H.

    2003-01-01

    We compared prefledging growth, energy expenditure, and time budgets in the arctic-breeding red knot (Calidris canutus) to those in temperate shorebirds, to investigate how arctic chicks achieve a high growth rate despite energetic difficulties associated with precocial development in a cold climate

  19. Hereditary breast cancer growth rates and its impact on screening policy.

    NARCIS (Netherlands)

    Tilanus-Linthorst, M.M.; Kriege, M.; Boetes, C.; Hop, W.C.J.; Obdeijn, I.M.; Oosterwijk-Wakka, J.C.; Peterse, H.L.; Zonderland, H.M.; Meijer, S.; Eggermont, A.M.M.; Koning, H.J. de; Klijn, J.G.M.; Brekelmans, C.T.

    2005-01-01

    Imaging is often performed yearly for the surveillance of BRCA1/2 mutation carriers and women at high familial breast cancer risk. Growth of cancers in carriers may be faster as these tumours are predominantly high grade. Quantitative data on tumour growth rates in these 2 groups are lacking. Here,

  20. Hereditary breast cancer growth rates and its impact on screening policy

    NARCIS (Netherlands)

    Tilanus-Linthorst, Madeleine M.A.; Kriege, Mieke; Boetes, Carla; Hop, Wim C.J.; Obdeijn, Inge-Marie; Oosterwijk, Jan C.; Peterse, Hans L.; Zonderland, Harmine M.; Meijer, Sybren; Eggermont, Alexander M.M.; De Koning, Harry J.; Klijn, Jan G.M.; Brekelmans, Cecile T.M.

    2005-01-01

    Imaging is often performed yearly for the surveillance of BRCA1/2 mutation carriers and women at high familial breast cancer risk. Growth of cancers in carriers may be faster as these tumours are predominantly high grade. Quantitative data on tumour growth rates in these 2 groups are lacking. Here,

  1. Growth rate and chemical composition of a manganese nodule from the EEZ of Seychelles

    Digital Repository Service at National Institute of Oceanography (India)

    Banakar, V.K.; Borole, D.V.

    mhe ferro-manganese nodule collected in EEZ of Seychelles yields a growth rate of 1.5 mm/10 6Y 230Th (ex)/ and 230Th (ex)/ 232Th activity ratio methods indicating very slow growth of ferro-manganese nodules. The Mn/Fe and U/Th ratios suggest...

  2. Phylogenetic, functional, and structural components of variation in bone growth rate of amniotes.

    Science.gov (United States)

    Cubo, Jorge; Legendre, Pierre; de Ricqlès, Armand; Montes, Laëtitia; de Margerie, Emmanuel; Castanet, Jacques; Desdevises, Yves

    2008-01-01

    The biological features observed in every living organism are the outcome of three sets of factors: historical (inherited by homology), functional (biological adaptation), and structural (properties inherent to the materials with which organs are constructed, and the morphogenetic rules by which they grow). Integrating them should bring satisfactory causal explanations of empirical data. However, little progress has been accomplished in practice toward this goal, because a methodologically efficient tool was lacking. Here we use a new statistical method of variation partitioning to analyze bone growth in amniotes. (1) Historical component. The variation of bone growth rates contains a significant phylogenetic signal, suggesting that the observed patterns are partly the outcome of shared ancestry. (2) Functional causation. High growth rates, although energy costly, may be adaptive (i.e., they may increase survival rates) in taxa showing short growth periods (e.g., birds). In ectothermic amniotes, low resting metabolic rates may limit the maximum possible growth rates. (3) Structural constraint. Whereas soft tissues grow through a multiplicative process, growth of mineralized tissues is accretionary (additive, i.e., mineralization fronts occur only at free surfaces). Bone growth of many amniotes partially circumvents this constraint: it is achieved not only at the external surface of the bone shaft, but also within cavities included in the bone cortex as it grows centrifugally. Our approach contributes to the unification of historicism, functionalism, and structuralism toward a more integrated evolutionary biology.

  3. The Quantum Effects Role on Weibel Instability Growth Rate in Dense Plasma

    Directory of Open Access Journals (Sweden)

    M. Mahdavi

    2015-01-01

    effects and density gradient tend to stabilize the Weibel instability. The density perturbations have decreased the growth rate of Weibel instability in the near corona fuel, η>0.1. In the small wavelengths limit, for the density gradient, η<0.1, the tunneling quantum effects increase anisotropy in the phase space. The quantum tunneling effect leads to an unexpected increase in the Weibel instability growth rate.

  4. Oscillatory, stochastic and chaotic growth rate fluctuations in permittistatically controlled yeast cultures.

    Science.gov (United States)

    Davey, H M; Davey, C L; Woodward, A M; Edmonds, A N; Lee, A W; Kell, D B

    1996-01-01

    We describe a continuous culture system related to the turbidostat, but using a feedback system based on biomass estimation from the dielectric permittivity of the cell suspension rather than its optical density. It is shown that this system provides an excellent method of maintaining a constant biomass level within a fermentor. The computer-controlled system was able to effect the essentially continuous registration of growth rate by monitoring the rate of medium addition via the time-dependent activity of the pump. At some biomass setpoints for aerobically grown cultures of baker's yeast substantial time-dependent fluctuations in the growth rate of the culture were thereby observed. At some biomass setpoints, however, or under anaerobic conditions, or when using a non-Crabtree yeast, the growth rate was constant, indicating that the fluctuations were inherent to the biological system and not simply a property of the fermentor and control system. A variety of time series analyses (Fourier transformations, Hurst and Lyapunov exponents, the determination of embedding dimension, and non-linear time series predictions based on the methodology of Sugihara and May) were used to demonstrate, for the first time, that as well as stochastic and periodic components these fluctuations exhibited deterministic chaos. 'Trivial predictors' were unable to give accurate predictions of the growth rate in these cultures. The growth rate fluctuations were studied further by means of offline measurements of changes in percentage viability, bud count, and in the external ethanol and glucose concentrations; these data and other evidence suggested that the growth rate fluctuations were closely linked to the primary respiro-fermentative metabolism of this organism. The identification of chaotic growth rates in cell cultures suggests that there may be novel methods for controlling the growth of such cultures.

  5. Population growth, saving, interest rates and stagnation: Discussing the Eggertsson-Mehrotra model

    OpenAIRE

    Spahn, Peter

    2016-01-01

    Post Keynesian stagnation theory argues that slower population growth dampens consumption and investment. A New Keynesian OLG model derives an unemployment equilibrium due to a negative natural rate in a three-generations credit contract framework. Besides deleveraging or rising inequality, also a shrinking population is a triggering factor. In all cases, a saving surplus drives real interest rates down. In other OLG settings however, with bonds as stores of value, slower population growth, o...

  6. Growth Rate Analysis and Efficient Experimental Design for Tumor Xenograft Studies

    OpenAIRE

    Gregory Hather; Ray Liu; Syamala Bandi; Jerome Mettetal; Mark Manfredi; Wen-Chyi Shyu; Jill Donelan; Arijit Chakravarty

    2014-01-01

    Human tumor xenograft studies are the primary means to evaluate the biological activity of anticancer agents in late-stage preclinical drug discovery. The variability in the growth rate of human tumors established in mice and the small sample sizes make rigorous statistical analysis critical. The most commonly used summary of antitumor activity for these studies is the T/C ratio. However, alternative methods based on growth rate modeling can be used. Here, we describe a summary metric called ...

  7. Landscape scale measures of steelhead (Oncorhynchus mykiss) bioenergetic growth rate potential in Lake Michigan and comparison with angler catch rates

    Science.gov (United States)

    Hook, T.O.; Rutherford, E.S.; Brines, Shannon J.; Geddes, C.A.; Mason, D.M.; Schwab, D.J.; Fleischer, G.W.

    2004-01-01

    The relative quality of a habitat can influence fish consumption, growth, mortality, and production. In order to quantify habitat quality, several authors have combined bioenergetic and foraging models to generate spatially explicit estimates of fish growth rate potential (GRP). However, the capacity of GRP to reflect the spatial distributions of fishes over large areas has not been fully evaluated. We generated landscape scale estimates of steelhead (Oncorhynchus mykiss) GRP throughout Lake Michigan for 1994-1996, and used these estimates to test the hypotheses that GRP is a good predictor of spatial patterns of steelhead catch rates. We used surface temperatures (measured with AVHRR satellite imagery) and acoustically measured steelhead prey densities (alewife, Alosa pseudoharengus) as inputs for the GRP model. Our analyses demonstrate that potential steelhead growth rates in Lake Michigan are highly variable in both space and time. Steelhead GRP tended to increase with latitude, and mean GRP was much higher during September 1995, compared to 1994 and 1996. In addition, our study suggests that landscape scale measures of GRP are not good predictors of steelhead catch rates throughout Lake Michigan, but may provide an index of interannual variation in system-wide habitat quality.

  8. Rate of head circumference growth as a function of autism diagnosis and history of autistic regression.

    Science.gov (United States)

    Webb, Sara Jane; Nalty, Theresa; Munson, Jeff; Brock, Catherine; Abbott, Robert; Dawson, Geraldine

    2007-10-01

    Several reports indicate that autism spectrum disorder is associated with increased rate of head growth in early childhood. Increased rate of growth may index aberrant processes during early development, may precede the onset of symptoms, and may predict severity of the disease course. We examined rate of change in occipitofrontal circumference measurements (abstracted from medical records) in 28 boys with autism spectrum disorder and in 8 boys with developmental delay without autism from birth to age 36 months. Only children who had more than 3 occipitofrontal circumference measurements available during this age period were included. All data were converted to z scores based on the Centers for Disease Control and Prevention norms. Rate of growth from birth to age 36 months was statistically significantly higher for the autism spectrum disorder group than the developmental delay group, with children with autism spectrum disorder showing a statistically significant increase in occipitofrontal circumference relative to norms between 7 and 10 months; this group difference in rate of growth was more robust when height was used as a covariate. Rate of growth was not found to be different for children with autism spectrum disorder whose parents reported a history of loss of skills (regression) vs those whose parents reported early onset of autism symptoms. Findings from this study suggest that the aberrant growth is present in the first year of life and precedes the onset and diagnosis in children with autism spectrum disorder with and without a history of autistic regression.

  9. Effect of growth rate on characteristic lengths of microstructure in directionally solidified

    Directory of Open Access Journals (Sweden)

    Zhang Yuan

    2013-09-01

    Full Text Available The microstructure of TiAl based alloys is sensitive to growth rates. In this paper, Bridgman directional solidification of Ti-46Al-2Cr-2Nb-0.2B (at.% alloy was carried out at a constant temperature gradient (G to investigate the effects of various growth rates (v on characteristic lengths (primary dendritic arm spacing, secondary dendritic arm spacing and lamellar spacing of the microstructure. Results show that under the experimental conditions of G = 18 K·m-1 and v = 15 μm·s-1 to 70 μm·s-1, the primary phase of directionally solidified Ti-46Al-2Cr-2Nb-0.2B alloy is α phase, the values of primary dendritic arm spacing (λ1, secondary dendritic arm spacing (λ2 and lamellar spacing (λ1a decrease with the increase in growth rate. The results were compared with theoretical models and similar experimental results of TiAl based alloys. The Bouchard-Kirkaldy model agrees well with the relationship between primary dendritic arm spacing and growth rate obtained in the experiment; the relationship between them can be expressed by λ1 = 758.6v-0.39. The relationship between the secondary dendritic arm spacing and the growth rate can be expressed by λ2 = 113.9v-0.45, while the relationship between the lamellar spacing and growth rate can be expressed by λ1a = 22.88v-0.94.

  10. Prediction of microbial growth rate versus biomass yield by a metabolic network with kinetic parameters.

    Science.gov (United States)

    Adadi, Roi; Volkmer, Benjamin; Milo, Ron; Heinemann, Matthias; Shlomi, Tomer

    2012-01-01

    Identifying the factors that determine microbial growth rate under various environmental and genetic conditions is a major challenge of systems biology. While current genome-scale metabolic modeling approaches enable us to successfully predict a variety of metabolic phenotypes, including maximal biomass yield, the prediction of actual growth rate is a long standing goal. This gap stems from strictly relying on data regarding reaction stoichiometry and directionality, without accounting for enzyme kinetic considerations. Here we present a novel metabolic network-based approach, MetabOlic Modeling with ENzyme kineTics (MOMENT), which predicts metabolic flux rate and growth rate by utilizing prior data on enzyme turnover rates and enzyme molecular weights, without requiring measurements of nutrient uptake rates. The method is based on an identified design principle of metabolism in which enzymes catalyzing high flux reactions across different media tend to be more efficient in terms of having higher turnover numbers. Extending upon previous attempts to utilize kinetic data in genome-scale metabolic modeling, our approach takes into account the requirement for specific enzyme concentrations for catalyzing predicted metabolic flux rates, considering isozymes, protein complexes, and multi-functional enzymes. MOMENT is shown to significantly improve the prediction accuracy of various metabolic phenotypes in E. coli, including intracellular flux rates and changes in gene expression levels under different growth rates. Most importantly, MOMENT is shown to predict growth rates of E. coli under a diverse set of media that are correlated with experimental measurements, markedly improving upon existing state-of-the art stoichiometric modeling approaches. These results support the view that a physiological bound on cellular enzyme concentrations is a key factor that determines microbial growth rate.

  11. Rapid, bilateral changes in growth rate and curvature during gravitropism of cucumber hypocotyls: implications for mechanism of growth control

    Science.gov (United States)

    Cosgrove, D. J.

    1990-01-01

    The growth response of etiolated cucumber (Cucumis sativus L.) hypocotyls to gravitropic stimulation was examined by means of time-lapse photography and high-resolution analysis of surface expansion and curvature. In comparison with video analysis, the technique described here has five- to 20-fold better resolution; moreover, the mathematical fitting method (cubic splines) allows direct estimation of local and integrated curvature. After switching seedlings from a vertical to horizontal position, both upper and lower surfaces of the stem reacted after a lag of about 11 min with a two- to three-fold increase in surface expansion rate on the lower side and a cessation of expansion, or slight compression, on the upper surface. This growth asymmetry was initiated simultaneously along the length of the hypocotyl, on both upper and lower surfaces, and did not migrate basipetally from the apex. Later stages in the gravitropic response involved a complex reversal of the growth asymmetry, with the net result being a basipetal migration of the curved region. This secondary growth reversal may reflect oscillatory and/or self-regulatory behaviour of growing cells. With some qualifications, the kinetics and pattern of growth response are consistent with a mechanism involving hormone redistribution, although they do not prove such a mechanism. The growth kinetics require a growth mechanism which can be stimulated by two- to three-fold or completely inhibited within a few minutes.

  12. Diagnostic Accuracy of Growth Rate in Differentiating Etiologies of Short Stature in Children

    Directory of Open Access Journals (Sweden)

    Mohammad Reza Alaei

    2016-08-01

    Full Text Available Background  Short stature is a manifestation of a wide variety of conditions that some of which may be amenable to timely treatment and a suboptimal growth rate may be an early marker pointing to the cause of growth retardation. This study was conducted to evaluate the diagnostic utility of growth rate in differential diagnosis of children with short stature. Materials and Methods All children between the ages of 2 and 18 years who visited in pediatric endocrinology clinic in a five years period were recruited in a prospective cohort study. Children with standing height Results One hundred forty three patients fulfilled the inclusion criteria. Mean follow up period was 14.4±10.9 months. Etiologies of short stature were: constitutional growth delay (CGD 46.9%, familial short stature (FSS 28.7%, hypothyroidism 4.2%, growth hormone deficiency (GHD 4.2% and miscellaneous causes in 16% of patients.  Mean Z- score for children with constitutional growth delay was -2.3±0.69, in familial short stature was -2.3±0.65 and for other condition was -2.7±1.49. There was a meaningful statistical correlation between growth rate and etiology of short stature (P0.05. Conclusion There was significant difference in growth rate between children with constitutional growth delay and familial short stature in comparing to short stature due to endocrine problem and other etiologies. Assessment of growth rate has some utility in diagnosing the etiology of short stature.

  13. Phytoplankton growth rate and nitrogen content: Implications for feeding and fecundity in a herbivorous copepod

    DEFF Research Database (Denmark)

    Kiørboe, Thomas

    1989-01-01

    at a concentration of 1.5 ppm. Over more than 2 orders of magnitude increase in algal growth rate, the ingested cell volume increased by less than a factor of 2, ingested carbon remained constant whereas ingested nitrogen as well as rate of egg production increased by a factor of ca 6. Variation in ingested cell......Observations of natural feeding and egg-production rates of planktonic copepods have revealed distinct responses, independent of phytoplankton biomass, to oceanographic processes that fertilize the photic layer. Are such responses caused by changes in phytoplankton growth rate, influencing feeding...... behaviour, and/or by changes in the chemical composition of the phytoplankton, influencing fecundity? The diatom Thalassiosira weissflogii, grown in continuous cultures at different dilution rates and different nitrogen concentrations in the growth medium, was offered to the copepod Acartia tonsa...

  14. Anisotropic interpolation method of silicon carbide oxidation growth rates for three-dimensional simulation

    Science.gov (United States)

    Šimonka, Vito; Nawratil, Georg; Hössinger, Andreas; Weinbub, Josef; Selberherr, Siegfried

    2017-02-01

    We investigate anisotropical and geometrical aspects of hexagonal structures of Silicon Carbide and propose a direction dependent interpolation method for oxidation growth rates. We compute three-dimensional oxidation rates and perform one-, two-, and three-dimensional simulations for 4H- and 6H-Silicon Carbide thermal oxidation. The rates of oxidation are computed according to the four known growth rate values for the Si- (0 0 0 1) , a- (1 1 2 bar 0) , m- (1 1 bar 0 0) , and C-face (0 0 0 1 bar) . The simulations are based on the proposed interpolation method together with available thermal oxidation models. We additionally analyze the temperature dependence of Silicon Carbide oxidation rates for different crystal faces using Arrhenius plots. The proposed interpolation method is an essential step towards highly accurate three-dimensional oxide growth simulations which help to better understand the anisotropic nature and oxidation mechanism of Silicon Carbide.

  15. Regeneration and growth rates of allofragments in four common stream plants

    DEFF Research Database (Denmark)

    Riis, Tenna; Madsen, Tom Vindbæk; Sennels, R. S. H.

    2009-01-01

    Colonisation by stream plants occurs to a large extent from simple stem fragments. Allofragments are stem fragments formed by mechanical breakage. We studied regeneration, colonisation, and growth rates in four common stream plants: Elodea canadensis Michx., Myriophyllum spicatum L., Potamogeton...... perfoliatus L. and Ranunculus baudotii x pseudofluitans. The objectives of this study were to determine (1) if shoots with an apical tip have higher regeneration (growth of new shoots and rhizomes from allofragments) and colonisation (root attachment in sediment) abilities and higher relative growth rates...

  16. 7075-T6 and 2024-T351 Aluminum Alloy Fatigue Crack Growth Rate Data

    Science.gov (United States)

    Forth, Scott C.; Wright, Christopher W.; Johnston, William M., Jr.

    2005-01-01

    Experimental test procedures for the development of fatigue crack growth rate data has been standardized by the American Society for Testing and Materials. Over the past 30 years several gradual changes have been made to the standard without rigorous assessment of the affect these changes have on the precision or variability of the data generated. Therefore, the ASTM committee on fatigue crack growth has initiated an international round robin test program to assess the precision and variability of test results generated using the standard E647-00. Crack growth rate data presented in this report, in support of the ASTM roundrobin, shows excellent precision and repeatability.

  17. Finite elements modeling of delaminations in composite laminates

    DEFF Research Database (Denmark)

    Gaiotti, m.; Rizzo, C.M.; Branner, Kim;

    2011-01-01

    The application of composite materials in many structures poses to engineers the problem to create reliable and relatively simple methods, able to estimate the strength of multilayer composite structures. Multilayer composites, like other laminated materials, suffer from layer separation, i.e., d...... by finite elements using different techniques. Results obtained with different finite element models are compared and discussed.......The application of composite materials in many structures poses to engineers the problem to create reliable and relatively simple methods, able to estimate the strength of multilayer composite structures. Multilayer composites, like other laminated materials, suffer from layer separation, i...... of the buckling strength of composite laminates containing delaminations. Namely, non-linear buckling and post-buckling analyses are carried out to predict the critical buckling load of elementary composite laminates affected by rectangular delaminations of different sizes and locations, which are modelled...

  18. Fracture and Delamination of Chromium Thin Films on Polymer Substrates

    Science.gov (United States)

    Cordill, M. J.; Taylor, A.; Schalko, J.; Dehm, G.

    2010-04-01

    New emerging technologies in the field of flexible electronic devices require that metal films adhere well and flex with polymer substrates. Common thin film materials used for these applications include copper (Cu) with an adhesion interlayer of chromium (Cr). Copper can be quite ductile and easily move with the polymer substrate. However, Cr is more brittle and fractures at lower strains than Cu. This study aims to examine the fracture and subsequent buckling and delamination of strained Cr films on polyimide (PI). In-situ scanning electron microscope (SEM) straining is used to systematically study the influence of film thickness on fracture and buckling strains. Film fracture and delamination depend on film thickness, and increases in crack and buckle density with decreasing thickness are explored by a shear lag model.

  19. Free-edge delamination - Laminate width and loading conditions effects

    Science.gov (United States)

    Murthy, Pappu L. N.; Chamis, Christos C.

    1989-01-01

    The width and loading conditions effects on free-edge stress fields in composite laminates are investigated using a three-dimensional finite element analysis. This analysis includes a special free-edge region refinement or superelement with progressive substructuring (mesh refinement) and finite thickness interply layers. The different loading conditions include in-plane and out-of-plane bending, combined axial tension and in-plane shear, twisting, uniform temperature and uniform moisture. Results obtained indicate that: axial tension causes the smallest magnitude of interlaminar free edge stress compared to other loading conditions; free-edge delamination data obtained from laboratory specimens cannot be scaled to structural components; and composite structural components are not likely to delaminate.

  20. Free-edge delamination: Laminate width and loading conditions effects

    Science.gov (United States)

    Murthy, P. L. N.; Chamis, C. C.

    1987-01-01

    The width and loading conditions effects on free-edge stress fields in composite laminates are investigated using a three-dimensional finite element analysis. This analysis includes a special free-edge region refinement or superelement with progrssive substructuring (mesh refinement) and finite thickness interply layers. The different loading conditions include in-plane and out-of-plane bending, combined axial tension and in-plane shear, twisting, uniform temperature and uniform moisture. Results obtained indicate that: axial tension causes the smallest magnitude of interlaminar free edge stress compared to other loading conditions; free-edge delamination data obtained from laboratory specimens cannot be scaled to structural components; and composite structural components are not likely to delaminate.

  1. Effects of climate change on plant population growth rate and community composition change.

    Science.gov (United States)

    Chang, Xiao-Yu; Chen, Bao-Ming; Liu, Gang; Zhou, Ting; Jia, Xiao-Rong; Peng, Shao-Lin

    2015-01-01

    The impacts of climate change on forest community composition are still not well known. Although directional trends in climate change and community composition change were reported in recent years, further quantitative analyses are urgently needed. Previous studies focused on measuring population growth rates in a single time period, neglecting the development of the populations. Here we aimed to compose a method for calculating the community composition change, and to testify the impacts of climate change on community composition change within a relatively short period (several decades) based on long-term monitoring data from two plots-Dinghushan Biosphere Reserve, China (DBR) and Barro Colorado Island, Panama (BCI)-that are located in tropical and subtropical regions. We proposed a relatively more concise index, Slnλ, which refers to an overall population growth rate based on the dominant species in a community. The results indicated that the population growth rate of a majority of populations has decreased over the past few decades. This decrease was mainly caused by population development. The increasing temperature had a positive effect on population growth rates and community change rates. Our results promote understanding and explaining variations in population growth rates and community composition rates, and are helpful to predict population dynamics and population responses to climate change.

  2. An inverse modeling procedure to determine particle growth and nucleation rates from measured aerosol size distributions

    Directory of Open Access Journals (Sweden)

    B. Verheggen

    2006-01-01

    Full Text Available Classical nucleation theory is unable to explain the ubiquity of nucleation events observed in the atmosphere. This shows a need for an empirical determination of the nucleation rate. Here we present a novel inverse modeling procedure to determine particle nucleation and growth rates based on consecutive measurements of the aerosol size distribution. The particle growth rate is determined by regression analysis of the measured change in the aerosol size distribution over time, taking into account the effects of processes such as coagulation, deposition and/or dilution. This allows the growth rate to be determined with a higher time-resolution than can be deduced from inspecting contour plots ('banana-plots''. Knowing the growth rate as a function of time enables the evaluation of the time of nucleation of measured particles of a certain size. The nucleation rate is then obtained by integrating the particle losses from time of measurement to time of nucleation. The regression analysis can also be used to determine or verify the optimum value of other parameters of interest, such as the wall loss or coagulation rate constants. As an example, the method is applied to smog chamber measurements. This program offers a powerful interpretive tool to study empirical aerosol population dynamics in general, and nucleation and growth in particular.

  3. Effects of climate change on plant population growth rate and community composition change.

    Directory of Open Access Journals (Sweden)

    Xiao-Yu Chang

    Full Text Available The impacts of climate change on forest community composition are still not well known. Although directional trends in climate change and community composition change were reported in recent years, further quantitative analyses are urgently needed. Previous studies focused on measuring population growth rates in a single time period, neglecting the development of the populations. Here we aimed to compose a method for calculating the community composition change, and to testify the impacts of climate change on community composition change within a relatively short period (several decades based on long-term monitoring data from two plots-Dinghushan Biosphere Reserve, China (DBR and Barro Colorado Island, Panama (BCI-that are located in tropical and subtropical regions. We proposed a relatively more concise index, Slnλ, which refers to an overall population growth rate based on the dominant species in a community. The results indicated that the population growth rate of a majority of populations has decreased over the past few decades. This decrease was mainly caused by population development. The increasing temperature had a positive effect on population growth rates and community change rates. Our results promote understanding and explaining variations in population growth rates and community composition rates, and are helpful to predict population dynamics and population responses to climate change.

  4. Chick metabolic rate and growth in three species of albatross: a comparative study.

    Science.gov (United States)

    Phillips, R A; Green, J A; Phalan, B; Croxall, J P; Butler, P J

    2003-05-01

    The relative importance of genetic vs. environmental factors in determining the pattern of avian post-embryonic development is much debated. Previous cross-fostering of albatrosses suggested that although inter-specific variation in growth rate was determined primarily by differences in dietary energy content, species-specific constraints might have evolved that could limit maximal growth, even in chicks fed at similar rates and on similar diets. This study aimed to determine whether intrinsic differences in resting metabolic rate were apparent during the linear phase of growth in chicks of three species (black-browed, grey-headed and light-mantled sooty albatrosses). There was a gradual increase in absolute, and a reduction in mass-specific metabolic rate from 5.0 W kg(-1) during the earliest part of linear growth, to 3.5 W kg(-1) by the time chicks reached peak mass. These values are considerably higher than in resting adults of comparable or lower mass, presumably reflecting the large size and high metabolic demand of organs involved in rapid nutrient processing and tissue synthesis by chicks. The lack of any detectable inter-specific variation in the pattern of metabolic rate changes casts some doubt on the existence of fundamental differences in growth rate that cannot be attributed simply to differences in dietary energy or nutrient delivery rate.

  5. Effects of soil nitrogen:phosphorus ratio on growth rate of Artemisia ordosica seedlings

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    To address how the ratios of nitrogen and phosphorus (N:P ratios) in soil affect plant growth, we performed a two-factor (soil available N:P ratios and plant density) randomized block pot experiment to examine the relationships between soil N:P ratios, and the N:P ratios and growth rate of Artemisia ordosica seedlings. Under moderate water stress and adequate nutrient status, both soil N:P and plant density influenced the N:P ratios and growth rates of A. ordosica. With the increase of soil N:P ratios, the growth rates of A. ordosica seedlings decreased significantly. With the increase of soil N:P ratios, N:P ratios in A. ordosica seedlings increased significantly. While the nitrogen concentrations in the plant increased slightly, the phosphorus concentrations significantly decreased. With the increase of plant density, the shoot N:P ratios and growth rates significantly decreased, which resulted from soil N:P ratios. Thus, soil N:P ratios influenced the N:P ratios in A. ordosica seedlings, and hence, influenced its growth. Our results suggest that, under adequate nutrient environment, soil N:P ratios can be a limiting factor for plant growth.

  6. Quantitative Physiology of Saccharomyces cerevisiae at Near-Zero Specific Growth Rates

    Science.gov (United States)

    Boender, Léonie G. M.; de Hulster, Erik A. F.; van Maris, Antonius J. A.; Daran-Lapujade, Pascale A. S.; Pronk, Jack T.

    2009-01-01

    Growth at near-zero specific growth rates is a largely unexplored area of yeast physiology. To investigate the physiology of Saccharomyces cerevisiae under these conditions, the effluent removal pipe of anaerobic, glucose-limited chemostat culture (dilution rate, 0.025 h−1) was fitted with a 0.22-μm-pore-size polypropylene filter unit. This setup enabled prolonged cultivation with complete cell retention. After 22 days of cultivation, specific growth rates had decreased below 0.001 h−1 (doubling time of >700 h). Over this period, viability of the retentostat cultures decreased to ca. 80%. The viable biomass concentration in the retentostats could be accurately predicted by a maintenance coefficient of 0.50 mmol of glucose g−1 of biomass h−1 calculated from anaerobic, glucose-limited chemostat cultures grown at dilution rates of 0.025 to 0.20 h−1. This indicated that, in contrast to the situation in several prokaryotes, maintenance energy requirements in S. cerevisiae do not substantially change at near-zero specific growth rates. After 22 days of retentostat cultivation, glucose metabolism was predominantly geared toward alcoholic fermentation to meet maintenance energy requirements. The strict correlation between glycerol production and biomass formation observed at higher specific growth rates was not maintained at the near-zero growth rates reached in the retentostat cultures. In addition to glycerol, the organic acids acetate, d-lactate, and succinate were produced at low rates during prolonged retentostat cultivation. This study identifies robustness and by-product formation as key issues in attempts to uncouple growth and product formation in S. cerevisiae. PMID:19592533

  7. DETECTION OF DELAMINATION IN A COMPOSITE PLATE BY SEM

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    A numerical method of integration of Green's functi ons of strip element method (SEM) is proposed. The response of ultrasonic sourc e generated by a transducer on the surface of a multi-ply composite plate conta ining a delamination is analyzed by the use of SEM. The numerical results show that the scanning features of the ultrasonic waves may be used to identify the d elamination inside the composite plate .

  8. Dynamic fracture mechanics analysis for an edge delamination crack

    Science.gov (United States)

    Rizzi, Stephen A.; Doyle, James F.

    1994-01-01

    A global/local analysis is applied to the problem of a panel with an edge delamination crack subject to an impulse loading to ascertain the dynamic J integral. The approach uses the spectral element method to obtain the global dynamic response and local resultants to obtain the J integral. The variation of J integral along the crack front is shown. The crack behavior is mixed mode (Mode 2 and Mode 3), but is dominated by the Mode 2 behavior.

  9. DIFFERENCES IN POST HATCH METABOLIC RATE AND DEVELOPMENTAL RATE IN ATLANTIC SALMON (SALMO SALAR L): EVIDENCE FOR COMPENSATORY GROWTH?

    DEFF Research Database (Denmark)

    Steffensen, John Fleng

    2010-01-01

    in six out of 91 families, the three families with earliest and the three families with latest time to hatch. Measurements were done on two occasions, at 570-580 (T1) and 600-610 (T2) day degrees from fertilization. Generally, VO2 increased and yolk was consumed between T1 and T2. Late hatching larvae...... and had higher metabolic rate in T1 suggests that these inherited differences can be even out by accelerated post hatch growth....

  10. In situ growth rates and biofilm development of Pseudomonas aeruginosa populations in chronic lung infections

    DEFF Research Database (Denmark)

    Yang, Lei; Haagensen, Janus Anders Juul; Jelsbak, Lars;

    2008-01-01

    The growth dynamics of bacterial pathogens within infected hosts are a fundamental but poorly understood feature of most infections. We have focused on the in situ distribution and growth characteristics of two prevailing and transmissible Pseudomonas aeruginosa clones that have caused chronic lung...... matrix, whereas nonmucoid variants were present mainly as dispersed cells. To obtain estimates of the growth rates of P. aeruginosa in CF lungs, we used quantitative FISH to indirectly measure growth rates of bacteria in sputum samples (reflecting the in vivo lung conditions). The concentration of r......RNA in bacteria isolated from sputa was measured and correlated with the rRNA contents of the same bacteria growing in vitro at defined rates. The results showed that most cells were actively growing with doubling times of between 100 and 200 min, with some growing even faster. Only a small stationary...

  11. Maximum Rate of Growth of Enstrophy in Solutions of the Fractional Burgers Equation

    CERN Document Server

    Yun, Dongfang

    2016-01-01

    This investigation is a part of a research program aiming to characterize the extreme behavior possible in hydrodynamic models by probing the sharpness of estimates on the growth of certain fundamental quantities. We consider here the rate of growth of the classical and fractional enstrophy in the fractional Burgers equation in the subcritical, critical and supercritical regime. First, we obtain estimates on these rates of growth and then show that these estimates are sharp up to numerical prefactors. In particular, we conclude that the power-law dependence of the enstrophy rate of growth on the fractional dissipation exponent has the same global form in the subcritical, critical and parts of the supercritical regime. This is done by numerically solving suitably defined constrained maximization problems and then demonstrating that for different values of the fractional dissipation exponent the obtained maximizers saturate the upper bounds in the estimates as the enstrophy increases. In addition, nontrivial be...

  12. Circadian cycles in growth and feeding rates of heterotrophic protist plankton

    DEFF Research Database (Denmark)

    Jakobsen, Hans Henrik; Strom, S.L.

    2004-01-01

    comatum, no day-night difference in growth and feeding rates was found. Maintenance of day-night rate differences during 24-h exposures to continuous darkness demonstrated that most of these protists had circadian cycles. The heterotrophic dinoflagellate Oxyrrhis marina exhibited a clear irradiance...... threshold for maintenance of the circadian cycle: day-night differences in growth and feeding rates were observed at irradiances as low as 2.6 X 10(-3) mumol photons m(-2) s(-1) but not at 3.1 X 10(-4) mumol photons m(-2) s(-1). We also studied growth and feeding in transition from complete darkness...... to culturing in a day: night light cycle in O. marina and found that resetting the circadian cycle in this dinoflagellate temporarily arrested growth and feeding. We suggest that protists use a time-integrated light threshold rather than an instantaneous irradiance to maintain the circadian cell cycle...

  13. Model of apparent crystal growth rate and kinetics of seeded precipitation from sodium aluminate solution

    Institute of Scientific and Technical Information of China (English)

    LI Xiao-bin; LIU Zhi-jian; XU Xiao-hui; ZHOU Qiu-sheng; PENG Zhi-hong; LIU Gui-hua

    2005-01-01

    Based on the population balance equation in a batch crystallizer characteristic of seeded precipitation, a model to calculate the rate of apparent crystal growth of aluminum hydroxide from the size distribution was deve-loped. The simulation results indicate that the rate of apparent crystal growth during seeded precipitation exhibits a manifest dependence on the crystal size. In general, there is an obvious increase in the apparent crystal growth rate with the augment in crystal size. The apparent activation energy increases with the increase of characteristic crystal size, which indicates that the growth of small crystals is controlled by surface chemical reaction; it is gradually controlled by both the surface reaction and diffusion with the augment in crystal size.

  14. Environmental implications of growth rate changes in Montastrea Annularis: Biscayne National Park, Florida

    Science.gov (United States)

    Hudson, J. Harold; Hanson, Kirby J.; Halley, Robert B.; Kindinger, Jack G.

    1994-01-01

    Long-term annual growth rates were determined for 25 Montastrea annularis colonies at eight reef sites in Biscayne National Park, Florida. X-radiographs of slabbed coral cores revealed chronologies that averaged 113.5 years in length with a range of 40 to 242 years. A total of 2,837 annual growth increments were identified and measured. Dating of density bands was verified by visually crossdating fluorescent bands within the coral skeleton. Average accretion rates of individual colonies varied from 5.0 mm·yr−1 in the northernmost sector of the Park to 11.3 mm·yr−1 in the southernmost sector. Long-term growth rates of most corals in this study were greatest prior to about 1950 except for a major, 3–5 year, decline in the growth record of older corals centered around 1878. Waxing and waning coral growth rates are discussed in relation to natural and anthropogenic perturbations that impact this high latitude reef ecosystem. Attention is drawn to nutrients from sewage outfalls as a possible contributing factor to observed growth rate decline since 1950.

  15. Jackknife-corrected parametric bootstrap estimates of growth rates in bivalve mollusks using nearest living relatives.

    Science.gov (United States)

    Dexter, Troy A; Kowalewski, Michał

    2013-12-01

    Quantitative estimates of growth rates can augment ecological and paleontological applications of body-size data. However, in contrast to body-size estimates, assessing growth rates is often time-consuming, expensive, or unattainable. Here we use an indirect approach, a jackknife-corrected parametric bootstrap, for efficient approximation of growth rates using nearest living relatives with known age-size relationships. The estimate is developed by (1) collecting a sample of published growth rates of closely related species, (2) calculating the average growth curve using those published age-size relationships, (3) resampling iteratively these empirically known growth curves to estimate the standard errors and confidence bands around the average growth curve, and (4) applying the resulting estimate of uncertainty to bracket age-size relationships of the species of interest. This approach was applied to three monophyletic families (Donacidae, Mactridae, and Semelidae) of mollusk bivalves, a group characterized by indeterministic shell growth, but widely used in ecological, paleontological, and geochemical research. The resulting indirect estimates were tested against two previously published geochemical studies and, in both cases, yielded highly congruent age estimates. In addition, a case study in applied fisheries was used to illustrate the potential of the proposed approach for augmenting aquaculture management practices. The resulting estimates of growth rates place body size data in a constrained temporal context and confidence intervals associated with resampling estimates allow for assessing the statistical uncertainty around derived temporal ranges. The indirect approach should allow for improved evaluation of diverse research questions, from sustainability of industrial shellfish harvesting to climatic interpretations of stable isotope proxies extracted from fossil skeletons.

  16. Controlled delamination of metal films by hydrogen loading

    Energy Technology Data Exchange (ETDEWEB)

    Nikitin, Eugen

    2008-11-18

    n this work we quantitatively determine the adhesion energy between metal films and their substrates. Therefore a new controlled buckling technique is established, applying the strong compressive in-plane stress that results in thin films clamped on rigid substrates during hydrogen loading. When the elastic energy stored in the H-loaded thin film exceeds the adhesion energy between film and substrate, delamination occurs. At the onset of delamination, a critical hydrogen concentration, a critical stress value and a critical bending of the substrate are present, which are quantitative measures for the adhesion energy and permit its calculation. As the critical values are determined at the onset of delamination, plastic deformation is negligible, which denies the quantitative determination of adhesion energies in conventional test setups. In multilayer-systems, adhesion energies between substrates and films that hardly absorb hydrogen can be measured by the controlled buckling technique, when the films of interest are coated with hydrogen absorbing films (active layer). The measurements are performed easily and can be repeated under the same test conditions, while variables such as the thickness of the coating materials or the boundary surface structure can be varied and optimized. In this work the adhesion energies of different materials on polycarbonate and niobium on sapphire are investigated. (orig.)

  17. Generation time, net reproductive rate, and growth in stage-age-structured populations

    DEFF Research Database (Denmark)

    Steiner, Uli; Tuljapurkar, Shripad; Coulson, Tim

    2014-01-01

    to age-structured populations. Here we generalize this result to populations structured by stage and age by providing a new, unique measure of reproductive timing (Tc) that, along with net reproductive rate (R0), has a direct mathematical relationship to and approximates growth rate (r). We use simple...

  18. Hydrogen Isotope Effect on the Fatigue Crack Growth Rate in Pipeline Steel

    Science.gov (United States)

    Connolly, Matthew; Slifka, Andrew; Drexler, Elizabeth; Hydrogen Pipeline Safety Team

    Hydrogen (H2) is desirable for energy storage as it is cleaner burning and can store a larger amount of energy than an equal mass of gasoline. One problem in the development of a hydrogen economy is to find or develop materials that ensure the safe, reliable, and cost-effective flow of energy from the source to the user. It is expected steels will be needed to serve this function. However, the existing network of natural gas pipeline, for example, is constructed of ferrous materials which are susceptible to embrittlement and subsequent increased fatigue crack growth rates after exposure to hydrogen. It is expected that diffusion rates play an important role on fatigue crack growth rates. We report the measurement of the fatigue crack growth rate in a high strength pipeline steel in a gaseous deuterium (D2) environment, in an effort to determine the role of diffusion rate on FCGR, because D2 is chemically identical to H2, but with twice the mass. We found that the D2 fatigue crack growth rate was not enhanced compared to air as is seen in an H2 environment; in fact our D2 rate measurement was slightly slower than in air, a result which is not expected to be due to diffusion rates alone. NIST Materials Measurement Laboratory, Applied Chemicals and Materials Division.

  19. Effects of light intensity and temperature on Cryptomonas ovata (Cryptophyceae) growth and nutrient uptake rates

    Science.gov (United States)

    Cloern, James E.

    1977-01-01

    Specific growth rate of Cryptomonas ovata var. palustris Pringsheim was measured in batch culture at 14 light-temperature combinations. Both the maximum growth rate (μm) and optimum light intensity (Iopt) fit an empirical function that increases exponentially with temperature up to an optimum (Topt), then declines rapidly as temperature exceeds Topt. Incorporation of these functions into Steele's growth equation gives a good estimate of specific growth rate over a wide range of temperature and light intensity. Rates of phosphate, ammonium and nitrate uptake were measured separately at 16 combinations of irradiance and temperature and following a spike addition of all starved cells initially took up nutrient at a rapid rate. This transitory surge was followed by a period of steady, substrate-saturated uptake that persisted until external nutrient concentration fell. Substrate-saturated NO3−-uptake proceeded at very slow rates in the dark and was stimulated by both increased temperature and irradiance; NH4+-uptake apparently proceeded at a basal rate at 8 and l4 C and was also stimulated by increased temperature and irradiance. Rates of NH4−-uptake were much higher than NO3−-uptake at all light-temperature combinations. Below 20 C, PO4−3-uptake was more rapid in dark than in light, but was light enhanced at 26 C.

  20. Effect of Temperature on the Void Growth in Pure Aluminium at High Strain-Rate Loading

    Institute of Scientific and Technical Information of China (English)

    QI Mei-Lan; HE Hong-Liang; YAN Shi-Lin

    2007-01-01

    @@ With the environment temperature varying from 273K to 773K, the dynamic process of void growth in pure aluminium at high strain-rate loading is calculated based on the dynamic growth equation of a void with internal pressure. The result shows that the effect of temperature on the growth of void should be emphasized. Because the initial pressure of void with gas will increase and the viscosity of materials will decrease with the rising of temperature, the growth of void is accelerated. Furthermore, material inertia restrains the growth of void evidently when the diameter exceeds 10μm. The effect of surface tension is very weak in the whole process of void growth.

  1. Systems Level Regulation of Rhythmic Growth Rate and Biomass Accumulation in Grasses

    Energy Technology Data Exchange (ETDEWEB)

    Kay, Steve A. [University of California San Diego

    2013-05-02

    Several breakthroughs have been recently made in our understanding of plant growth and biomass accumulation. It was found that plant growth is rhythmically controlled throughout the day by the circadian clock through a complex interplay of light and phytohormone signaling pathways. While plants such as the C4 energy crop sorghum (Sorghum bicolor (L.) Moench) and possibly the C3 grass (Brachypodium distachyon) also exhibit daily rhythms in growth rate, the molecular details of its regulation remain to be explored. A better understanding of diurnally regulated growth behavior in grasses may lead to species-specific mechanisms highly relevant to future strategies to optimize energy crop biomass yield. Here we propose to devise a systems approach to identify, in parallel, regulatory hubs associated with rhythmic growth in C3 and C4 plants. We propose to use rhythmicity in daily growth patterns to drive the discovery of regulatory network modules controlling biomass accumulation.

  2. How to determine control of growth rate in a chemostat. Using metabolic control analysis to resolve the paradox

    DEFF Research Database (Denmark)

    Snoep, Jacky L.; Jensen, Peter Ruhdal; Groeneveld, Philip

    1994-01-01

    how, paradoxically, one can determine control of growth rate, of growth yield and of other fluxes in a chemostat. We develop metabolic control analysis for the chemostat. this analysis does not depend on the particular way in which specific growth rate varies with the concentration of the growth...

  3. Maximum growth rate of Mycobacterium avium in continuous culture or chronically infected BALB/c mice.

    Science.gov (United States)

    McCarthy, C M; Taylor, M A; Dennis, M W

    1987-01-01

    Mycobacterium avium is a human pathogen which may cause either chronic or disseminated disease and the organism exhibits a slow rate of growth. This study provides information on the growth rate of the organism in chronically infected mice and its maximal growth rate in vitro. M. avium was grown in continuous culture, limited for nitrogen with 0.5 mM ammonium chloride and dilution rates that ranged from 0.054 to 0.153 h-1. The steady-state concentration of ammonia nitrogen and M. avium cells for each dilution rate were determined. The bacterial saturation constant for growth-limiting ammonia was 0.29 mM (4 micrograms nitrogen/ml) and, from this, the maximal growth rate for M. avium was estimated to be 0.206 h-1 or a doubling time of 3.4 h. BALB/c mice were infected intravenously with 3 x 10(6) colony-forming units and a chronic infection resulted, typical of virulent M. avium strains. During a period of 3 months, the number of mycobacteria remained constant in the lungs, but increased 30-fold and 8,900-fold, respectively, in the spleen and mesenteric lymph nodes. The latter increase appeared to be due to proliferation in situ. The generation time of M. avium in the mesenteric lymph nodes was estimated to be 7 days.

  4. Capital accumulation, structural change and real exchange rate in a Keynesian-Structuralist growth model

    Directory of Open Access Journals (Sweden)

    Oreiro José Luis

    2015-01-01

    Full Text Available The aim of this paper is to show at theoretical level that maintaining a competitive real exchange rate positively affects the economic growth of developing countries by means of a Keynesian-Structuralist model that combines elements of Kaleckian growth models with the balance of payments constrained growth models pioneered developed by Thirlwall. In this setting, the level of real exchange rate is capable, due to its effect over capital accumulation, to induce a structural change in the economy, making endogenous income elasticities of exports and imports. For reasonable parameter values it is shown that in steady-state growth there is two long-run equilibrium values for real exchange rate, one that corresponds to an under-valued currency and another that corresponds to an over-valued currency. If monetary authorities run exchange rate policy in order to target a competitive level for real exchange rate, than under-valued equilibrium is stable and the economy will show a high growth rate in the long-run.

  5. Estimating blue whale skin isotopic incorporation rates and baleen growth rates: Implications for assessing diet and movement patterns in mysticetes

    Science.gov (United States)

    Busquets-Vass, Geraldine; Newsome, Seth D.; Calambokidis, John; Serra-Valente, Gabriela; Jacobsen, Jeff K.; Aguíñiga-García, Sergio; Gendron, Diane

    2017-01-01

    Stable isotope analysis in mysticete skin and baleen plates has been repeatedly used to assess diet and movement patterns. Accurate interpretation of isotope data depends on understanding isotopic incorporation rates for metabolically active tissues and growth rates for metabolically inert tissues. The aim of this research was to estimate isotopic incorporation rates in blue whale skin and baleen growth rates by using natural gradients in baseline isotope values between oceanic regions. Nitrogen (δ15N) and carbon (δ13C) isotope values of blue whale skin and potential prey were analyzed from three foraging zones (Gulf of California, California Current System, and Costa Rica Dome) in the northeast Pacific from 1996–2015. We also measured δ15N and δ13C values along the lengths of baleen plates collected from six blue whales stranded in the 1980s and 2000s. Skin was separated into three strata: basale, externum, and sloughed skin. A mean (±SD) skin isotopic incorporation rate of 163±91 days was estimated by fitting a generalized additive model of the seasonal trend in δ15N values of skin strata collected in the Gulf of California and the California Current System. A mean (±SD) baleen growth rate of 15.5±2.2 cm y-1 was estimated by using seasonal oscillations in δ15N values from three whales. These oscillations also showed that individual whales have a high fidelity to distinct foraging zones in the northeast Pacific across years. The absence of oscillations in δ15N values of baleen sub-samples from three male whales suggests these individuals remained within a specific zone for several years prior to death. δ13C values of both whale tissues (skin and baleen) and potential prey were not distinct among foraging zones. Our results highlight the importance of considering tissue isotopic incorporation and growth rates when studying migratory mysticetes and provide new insights into the individual movement strategies of blue whales. PMID:28562625

  6. Value of volume measurements in evaluating abdominal aortic aneurysms growth rate and need for surgical treatment

    Energy Technology Data Exchange (ETDEWEB)

    Kontopodis, Nikolaos, E-mail: kontopodisn@yahoo.gr [Department of Vascular Surgery, University of Crete Medical School, Heraklion (Greece); Metaxa, Eleni, E-mail: emmetaxa@gmail.com [Institute of Applied and Computational Mathematics, Foundation for Research and Technology-Hellas, Heraklion, Crete (Greece); Papaharilaou, Yannis, E-mail: yannisp@iacm.forth.gr [Institute of Applied and Computational Mathematics, Foundation for Research and Technology-Hellas, Heraklion, Crete (Greece); Georgakarakos, Efstratios, E-mail: efstratiosgeorg@gmail.com [Vascular Surgery Department, “Demokritus” University of Thrace Medical School, Alexandroupolis (Greece); Tsetis, Dimitris, E-mail: tsetis@med.uoc.gr [Interventional Radiology Unit, Department of Radiology, University of Crete Medical School, Heraklion, Crete (Greece); Ioannou, Christos V., E-mail: ioannou@med.uoc.gr [Department of Vascular Surgery, University of Crete Medical School, Heraklion (Greece)

    2014-07-15

    Purpose: To examine whether indices other than the traditionally used abdominal aortic aneurysm (AAA) maximum diameter, such as AAA volume, intraluminal thrombus (ILT) thickness and ILT volume, may be superior to evaluate aneurismal enlargement. Materials and methods: Thirty-four small AAAs (initially presenting a maximum diameter <5.5 cm which is the threshold for surgical repair) with an initial and a follow-up CT were examined. Median increase and percentile annual change of these variables was calculated. Correlation between growth rates as determined by the new indices under evaluation and those of maximum diameter were assessed. AAAs were divided according to outcome (surveillance vs. elective repair after follow-up which is based on the maximum diameter criterion) and according to growth rate (high vs. low) based on four indices. Contingency between groups of high/low growth rate regarding each of the four indices on one hand and those regarding need for surgical repair on the other was assessed. Results: A strong correlation between growth rates of maximum diameter and those of AAA and ILT volumes could be established. Evaluation of contingency between groups of outcome and those of growth rate revealed significant associations only for AAA and ILT volumes. Subsequently AAAs with a rapid volumetric increase over time had a likelihood ratio of 10 to be operated compared to those with a slower enlargement. Regarding increase of maximum diameter, likelihood ratio between AAAs with rapid and those with slow expansion was only 3. Conclusion: Growth rate of aneurysms regarding 3Dimensional indices of AAA and ILT volumes is significantly associated with the need for surgical intervention while the same does not hold for growth rates determined by 2Dimensional indices of maximum diameter and ILT thickness.

  7. Characteristics of Growth Rate of Coral Porites from Sanya Bay, Hainan Island and its Relationship to Environmental Variables

    Institute of Scientific and Technical Information of China (English)

    Shi Qi; Zhang Yechun; Sun Donghuai

    2003-01-01

    The time series of annual and seasonal growth rate of two coral Porites, collected at different sites of fringe reef in the Sanya Bay, Hainan Island have been obtained by analyzing X-radiograph of skeletal band. There are obvious seasonal variations of the growth rate in two corals, the average low rate in winter and the average high rate from spring to autumn. Compared with the time series of environmental variables, the coral growth rate is only correlated statistically with seawater temperature and not related to rainfall and sunshine. Furthermore, the growth rate in spring and summer is correlated directly with seawater temperature of the winter-early spring ( between December and March ) and the other seasonal growth rate has no relationship with seasonal variations of seawater temperature. We propose that seawater temperature is one of the factors affecting the coral growth rate in the area and the low seawater temperature is a primary control of the seasonal growth rate.

  8. Concurrent growth rate and transcript analyses reveal essential gene stringency in Escherichia coli.

    Directory of Open Access Journals (Sweden)

    Shan Goh

    Full Text Available BACKGROUND: Genes essential for bacterial growth are of particular scientific interest. Many putative essential genes have been identified or predicted in several species, however, little is known about gene expression requirement stringency, which may be an important aspect of bacterial physiology and likely a determining factor in drug target development. METHODOLOGY/PRINCIPAL FINDINGS: Working from the premise that essential genes differ in absolute requirement for growth, we describe silencing of putative essential genes in E. coli to obtain a titration of declining growth rates and transcript levels by using antisense peptide nucleic acids (PNA and expressed antisense RNA. The relationship between mRNA decline and growth rate decline reflects the degree of essentiality, or stringency, of an essential gene, which is here defined by the minimum transcript level for a 50% reduction in growth rate (MTL(50. When applied to four growth essential genes, both RNA silencing methods resulted in MTL(50 values that reveal acpP as the most stringently required of the four genes examined, with ftsZ the next most stringently required. The established antibacterial targets murA and fabI were less stringently required. CONCLUSIONS: RNA silencing can reveal stringent requirements for gene expression with respect to growth. This method may be used to validate existing essential genes and to quantify drug target requirement.

  9. Shape of Growth Rate Distribution determines the type of Non-Gibrat's Law

    CERN Document Server

    Ishikawa, Atushi; Mizuno, Takayuki

    2010-01-01

    In this study, by employing exhaustive business data on Japanese firms that approximately fully cover the middle- and large-scale ranges in terms of firm size, the authors confirm the following findings. Detailed Balance is observed not only in profits data but also in sales data. The growth-rate distribution of sales has wider tails than the linear growth-rate distribution of profits in log-log scale. On one hand, in the middle-scale range of profits, the probability of positive growth decreases and the probability of negative growth increases symmetrically as the initial value increases. This is called Non-Gibrat's First Law. On the other hand, in the middle-scale range of sales, the probability of positive growth decreases as the initial value increases, while the probability of negative growth hardly changes. This is called Non-Gibrat's Second Law. Under Detailed Balance, Non-Gibrat's First and Second Laws are analytically induced from the linear and quadratic growth-rate distributions in log-log scale, r...

  10. Influence of water relations and growth rate on plant element uptake and distribution

    Energy Technology Data Exchange (ETDEWEB)

    Greger, Maria [Stockholm Univ. (Sweden). Dept. of Botany

    2006-02-15

    Plant uptake of Ni, Sr, Mo, Cs, La, Th, Se, Cl and I was examined to determine how plant water relations and growth rate influence the uptake and distribution of these elements in the studied plants. The specific questions were how water uptake and growth rate influenced the uptake of various nuclides and how transpiration influenced translocation to the shoot. The knowledge gained will be used in future modelling of radionuclide leakage from nuclear waste deposits entering the ecosystem via plants. The plant studied was willow, Salix viminalis, a common plant in the areas suggested for waste disposal; since there can be clone variation, two different clones having different uptake properties for several other heavy metals were used. The plants were grown in nutrient solution and the experiments on 3-month-old plants were run for 3 days. Polyethylene glycol was added to the medium to decrease the water uptake rate, a fan was used to increase the transpiration rate, and different light intensities were used to produce different growth rates. Element concentration was analysed in roots and shoots. The results show that both the uptake and distribution of various elements are influenced in different ways and to various extents by water flow and plant growth rate, and that it is not possible from the chemical properties of these elements to know how they will react. However, in most cases increased growth rate diluted the concentration of the element in the tissue, reduced water uptake reduced the element uptake, while transpiration had no effect on the translocation of elements to the shoot. The clones did not differ in terms of either the uptake or translocation of the elements, except that I was not taken up and translocated to the shoot in one of the clones when the plant water flow or growth rate was too low. Not all of the elements were found in the plant in the same proportions as they had been added to the nutrient solution.

  11. Pretreatment Growth Rate Predicts Radiation Response in Vestibular Schwannomas

    Energy Technology Data Exchange (ETDEWEB)

    Niu, Nina N. [Department of Radiation Oncology, Harvard Medical School, Massachusetts General Hospital, Boston, Massachusetts (United States); Harvard Medical School, Department of Medicine, Brigham and Women' s Hospital, Boston, Massachusetts (United States); Niemierko, Andrzej [Department of Radiation Oncology, Harvard Medical School, Massachusetts General Hospital, Boston, Massachusetts (United States); Larvie, Mykol [Harvard Medical School, Department of Radiology, Massachusetts General Hospital, Boston, Massachusetts (United States); Curtin, Hugh [Harvard Medical School, Department of Radiology, Massachusetts Eye and Ear Infirmary, Boston, Massachusetts (United States); Loeffler, Jay S. [Department of Radiation Oncology, Harvard Medical School, Massachusetts General Hospital, Boston, Massachusetts (United States); McKenna, Michael J. [Harvard Medical School, Department of Otolaryngology, Massachusetts Eye and Ear Infirmary, Boston, Massachusetts (United States); Shih, Helen A., E-mail: hshih@partners.org [Department of Radiation Oncology, Harvard Medical School, Massachusetts General Hospital, Boston, Massachusetts (United States)

    2014-05-01

    Purpose: Vestibular schwannomas (VS) are often followed without initial therapeutic intervention because many tumors do not grow and radiation therapy is associated with potential adverse effects. In an effort to determine whether maximizing initial surveillance predicts for later treatment response, the predictive value of preirradiation growth rate of VS on response to radiation therapy was assessed. Methods and Materials: Sixty-four patients with 65 VS were treated with single-fraction stereotactic radiation surgery or fractionated stereotactic radiation therapy. Pre- and postirradiation linear expansion rates were estimated using volumetric measurements on sequential magnetic resonance images (MRIs). In addition, postirradiation tumor volume change was classified as demonstrating shrinkage (ratio of volume on last follow-up MRI to MRI immediately preceding irradiation <80%), stability (ratio 80%-120%), or expansion (ratio >120%). The median pre- and postirradiation follow-up was 20.0 and 27.5 months, respectively. Seven tumors from neurofibromatosis type 2 (NF2) patients were excluded from statistical analyses. Results: In the 58 non-NF2 patients, there was a trend of correlation between pre- and postirradiation volume change rates (slope on linear regression, 0.29; P=.06). Tumors demonstrating postirradiation expansion had a median preirradiation growth rate of 89%/year, and those without postirradiation expansion had a median preirradiation growth rate of 41%/year (P=.02). As the preirradiation growth rate increased, the probability of postirradiation expansion also increased. Overall, 24.1% of tumors were stable, 53.4% experienced shrinkage, and 22.5% experienced expansion. Predictors of no postirradiation tumor expansion included no prior surgery (P=.01) and slower tumor growth rate (P=.02). The control of tumors in NF2 patients was only 43%. Conclusions: Radiation therapy is an effective treatment for VS, but tumors that grow quickly preirradiation may be

  12. Lifespan, growth rate, and body size across latitude in marine Bivalvia, with implications for Phanerozoic evolution.

    Science.gov (United States)

    Moss, David K; Ivany, Linda C; Judd, Emily J; Cummings, Patrick W; Bearden, Claire E; Kim, Woo-Jun; Artruc, Emily G; Driscoll, Jeremy R

    2016-08-17

    Mean body size in marine animals has increased more than 100-fold since the Cambrian, a discovery that brings to attention the key life-history parameters of lifespan and growth rate that ultimately determine size. Variation in these parameters is not well understood on the planet today, much less in deep time. Here, we present a new global database of maximum reported lifespan and shell growth coupled with body size data for 1 148 populations of marine bivalves and show that (i) lifespan increases, and growth rate decreases, with latitude, both across the group as a whole and within well-sampled species, (ii) growth rate, and hence metabolic rate, correlates inversely with lifespan, and (iii) opposing trends in lifespan and growth combined with high variance obviate any demonstrable pattern in body size with latitude. Our observations suggest that the proposed increase in metabolic activity and demonstrated increase in body size of organisms over the Phanerozoic should be accompanied by a concomitant shift towards faster growth and/or shorter lifespan in marine bivalves. This prediction, testable from the fossil record, may help to explain one of the more fundamental patterns in the evolutionary and ecological history of animal life on this planet.

  13. Human disturbance influences reproductive success and growth rate in California sea lions (Zalophus californianus).

    Science.gov (United States)

    French, Susannah S; González-Suárez, Manuela; Young, Julie K; Durham, Susan; Gerber, Leah R

    2011-03-16

    The environment is currently undergoing changes at both global (e.g., climate change) and local (e.g., tourism, pollution, habitat modification) scales that have the capacity to affect the viability of animal and plant populations. Many of these changes, such as human disturbance, have an anthropogenic origin and therefore may be mitigated by management action. To do so requires an understanding of the impact of human activities and changing environmental conditions on population dynamics. We investigated the influence of human activity on important life history parameters (reproductive rate, and body condition, and growth rate of neonate pups) for California sea lions (Zalophus californianus) in the Gulf of California, Mexico. Increased human presence was associated with lower reproductive rates, which translated into reduced long-term population growth rates and suggested that human activities are a disturbance that could lead to population declines. We also observed higher body growth rates in pups with increased exposure to humans. Increased growth rates in pups may reflect a density dependent response to declining reproductive rates (e.g., decreased competition for resources). Our results highlight the potentially complex changes in life history parameters that may result from human disturbance, and their implication for population dynamics. We recommend careful monitoring of human activities in the Gulf of California and emphasize the importance of management strategies that explicitly consider the potential impact of human activities such as ecotourism on vertebrate populations.

  14. Human disturbance influences reproductive success and growth rate in California sea lions (Zalophus californianus.

    Directory of Open Access Journals (Sweden)

    Susannah S French

    Full Text Available The environment is currently undergoing changes at both global (e.g., climate change and local (e.g., tourism, pollution, habitat modification scales that have the capacity to affect the viability of animal and plant populations. Many of these changes, such as human disturbance, have an anthropogenic origin and therefore may be mitigated by management action. To do so requires an understanding of the impact of human activities and changing environmental conditions on population dynamics. We investigated the influence of human activity on important life history parameters (reproductive rate, and body condition, and growth rate of neonate pups for California sea lions (Zalophus californianus in the Gulf of California, Mexico. Increased human presence was associated with lower reproductive rates, which translated into reduced long-term population growth rates and suggested that human activities are a disturbance that could lead to population declines. We also observed higher body growth rates in pups with increased exposure to humans. Increased growth rates in pups may reflect a density dependent response to declining reproductive rates (e.g., decreased competition for resources. Our results highlight the potentially complex changes in life history parameters that may result from human disturbance, and their implication for population dynamics. We recommend careful monitoring of human activities in the Gulf of California and emphasize the importance of management strategies that explicitly consider the potential impact of human activities such as ecotourism on vertebrate populations.

  15. Trace incorporation of heavy water reveals slow and heterogeneous pathogen growth rates in cystic fibrosis sputum

    Science.gov (United States)

    Kopf, Sebastian H.; Sessions, Alex L.; Cowley, Elise S.; Reyes, Carmen; Van Sambeek, Lindsey; Hu, Yang; Orphan, Victoria J.; Kato, Roberta; Newman, Dianne K.

    2016-01-01

    Effective treatment for chronic infections is undermined by a significant gap in understanding of the physiological state of pathogens at the site of infection. Chronic pulmonary infections are responsible for the morbidity and mortality of millions of immunocompromised individuals worldwide, yet drugs that are successful in laboratory culture are far less effective against pathogen populations persisting in vivo. Laboratory models, upon which preclinical development of new drugs is based, can only replicate host conditions when we understand the metabolic state of the pathogens and the degree of heterogeneity within the population. In this study, we measured the anabolic activity of the pathogen Staphylococcus aureus directly in the sputum of pediatric patients with cystic fibrosis (CF), by combining the high sensitivity of isotope ratio mass spectrometry with a heavy water labeling approach to capture the full range of in situ growth rates. Our results reveal S. aureus generation times with a median of 2.1 d, with extensive growth rate heterogeneity at the single-cell level. These growth rates are far below the detection limit of previous estimates of CF pathogen growth rates, and the rates are slowest in acutely sick patients undergoing pulmonary exacerbations; nevertheless, they are accessible to experimental replication within laboratory models. Treatment regimens that include specific antibiotics (vancomycin, piperacillin/tazobactam, tobramycin) further appear to correlate with slow growth of S. aureus on average, but follow-up longitudinal studies must be performed to determine whether this effect holds for individual patients.

  16. Empirical Analysis of Non-Performing Loans Trend and Growth Rate in Nigerian Banking System

    Directory of Open Access Journals (Sweden)

    Aniefiok Akpan Umoren

    2016-04-01

    Full Text Available Increasing trend in Non-performing loans (NPLs adversely affected availability of credits to economic agents in all sectors of the economy thereby constraining financial intermediation and economic activities. The study examined the trend and growth rates of NPLs in the Nigerian banking system during the major banking policy reforms regimes namely: pre-consolidation (1979 – 2004 and post consolidation era (2005 – 2014. Time series data collected were analyzed using descriptive and regression analyses. Results indicated irregular fluctuations in NPLs’ trend in both periods. This result suggested prevalent of high credit risk and corresponding reduction in lending capability of banks in the economy. Regression estimates of NPLs’ trend in the two regimes showed significant negative growth rates. This implies that, financial policies implemented in the country yielded positive impacts over time. NPLs assumed an exponential growth rate of -1.39% and -15.55% during the pre and post consolidated eras respectively. An average exponential growth rate of -5.2% was obtained during the entire period. Quadratic trend analysis revealed that, increase influence of time variable significantly reduced NPLs during pre- consolidation regime and the entire period considered. However, this influence was stagnated during post consolidation period. Based on the result, it is recommended that, prudent lending coupled with swift and orderly clean-up of banking system loan portfolios should be adopted to decelerate NPLs trend and growth rate in Nigeria. Time is an important element in designing and implementing any banking and macroeconomic policy.

  17. Size evolution in microorganisms masks trade-offs predicted by the growth rate hypothesis.

    Science.gov (United States)

    Gounand, Isabelle; Daufresne, Tanguy; Gravel, Dominique; Bouvier, Corinne; Bouvier, Thierry; Combe, Marine; Gougat-Barbera, Claire; Poly, Franck; Torres-Barceló, Clara; Mouquet, Nicolas

    2016-12-28

    Adaptation to local resource availability depends on responses in growth rate and nutrient acquisition. The growth rate hypothesis (GRH) suggests that growing fast should impair competitive abilities for phosphorus and nitrogen due to high demand for biosynthesis. However, in microorganisms, size influences both growth and uptake rates, which may mask trade-offs and instead generate a positive relationship between these traits (size hypothesis, SH). Here, we evolved a gradient of maximum growth rate (μmax) from a single bacterium ancestor to test the relationship among μmax, competitive ability for nutrients and cell size, while controlling for evolutionary history. We found a strong positive correlation between μmax and competitive ability for phosphorus, associated with a trade-off between μmax and cell size: strains selected for high μmax were smaller and better competitors for phosphorus. Our results strongly support the SH, while the trade-offs expected under GRH were not apparent. Beyond plasticity, unicellular populations can respond rapidly to selection pressure through joint evolution of their size and maximum growth rate. Our study stresses that physiological links between these traits tightly shape the evolution of competitive strategies.

  18. The effect of material properties on growth rates of folding and boudinage: Experiments with wax models

    Science.gov (United States)

    Neurath, C.; Smith, R. B.

    The growth of unstable structures was studied experimentally in layered wax models. The rheological properties of the two wax types were determined independently by a series of cylinder compression tests. Both waxes enhibited (1) a non-Newtonian stress vs strain-rate relationship (2) strain softening and (3) temperature-dependent viscosity. The stress-strain-rate relationships approximated a power-law, with stress exponents of 5 for the microcrystalline wax and 1.8 for paraffin wax. Blocks of paraffin with a single embedded layer of microcrystalline wax were deformed in two-dimensional pure shear with the layer oriented either parallel to the compressive strain axis so that it shortened and folded, or perpendicular to that axis so that it would stretch and boundinage would form. The growth rates of tiny initial disturbances were measured. The growth rates for folding and boudinage were much higher than could be accounted for by theories assuming Newtonian material properties. Theories taking non-Newtonian behaviour into account (Smith, R. B. 1975. Bull. geol. Soc. Am.86, 1601-1609; Fletcher, R. C. 1974. Am. J. Sci.274, 1029-1043) better describe the folding growth rates. Boudinage, however, grew almost three times faster than would be predicted even by existing non-Newtonian theory. A possible reason for this discrepancy is that the waxes do not exhibit steady-state creep as assumed in the theory. We, therefore, extend the theory to include strain-softening. The crucial step in this theory is the use of a scalar measure of the deformation as a state variable in the constitutive law. In this way the isotropic manifestation of strain-softening can be taken into account. The analysis shows that strain-softening can lead to greatly increased boudinage growth rates while having little influence on the growth rates of folds, which is in agreement with the experiments.

  19. Implications Of Foreign Direct Investment, Financial Development And Real Exchange Rate For Economic Growth In Cameroon

    Directory of Open Access Journals (Sweden)

    Victalice Ngimanang Achamoh

    2016-05-01

    Full Text Available This paper assesses the effects of foreign direct investment (FDI, financial development and real exchange rate (RER on economic growth in Cameroon using Cameroon’s annual time series data spanning the period 1977 - 2010. To address these objectives, residual based Engle-Granger test, the OLS based Autoregressive Distributive Lag (ARDL bound testing and maximum likelihood based Johansen cointegration techniques are employed. Results of Unit roots tests show that all the series possessed unit roots at level or first difference form. The ARDL model and VECM results reveal that the RER has a significant negative effect on economic growth, while FDI and Financial Development relate positively to economic growth. These findings have implications for stimulating economic growth by increasing efficiency of the financial sector in allocating credit to the private sector and preventing real exchange rate appreciation in the shortrun.

  20. Spatial distribution of soda straws growth rates of the Coufin Cave (Vercors, France

    Directory of Open Access Journals (Sweden)

    Perrette Yves

    2010-07-01

    Full Text Available The Choranche Cave system (Vercors, France is an excellent locality for measuring the growth rates of large numbers soda straws. This is especially the case for the Coufin Cave, as enlargement of the cave entrance in 1875 led to a change in stalactite color from brown to white, thus providing a reliable chronomarker. The date of this brown-to-white calcite transition has been confirmed by lamina counting. We measured and georeferenced the growth-lengths of 306 soda straws in a 1m2 area of the roof of the Coufin Cave entrance chamber. Because of the very slow and sometimes inexistent water feeding of those stalactites, hydrochemistry analysis were not achieved and drop rate effect on growth were neglected; this study is based on a geomorphological and geostatistical work. By measuring a large number of soda straws in a very small area for which most of the parameters affecting stalactite growth could be considered uniform, and because flow rates are very slow (frequencies are always superior to 1 drop per half hour, we could ascribe differences in growth rates to variations in the global increase of water flow through the unsaturated matrix. Statistical and geostatistical analyses of the measurements showed that this set of similarly shaped stalactites actually consisted of three Gaussian populations with different mean growth rates: fast growth rate (FGR- mean of 0.92 mm.y-1, medium growth rate (MGR- mean of 0.47 mm.y-1 and low growth rate (LGR- 0.09 mm.y-1. Plotting the lengths and spatial distribution of the 20 longest FGR soda straws revealed that there is a rough pattern to the water flow through the cave roof. Even if no direction is statisticaly different from others, the observed directional pattern is consistent with local and regional tectonic observations. Plots of the spatial distribution of the soda straws show that FGR soda straws follow lines of regional geological stress, whereas MGR and LGR soda straws are more dispersed.

  1. Low-velocity Impact Damage Analysis of Composite Laminates Using Self-adapting Delamination Element Method

    Institute of Scientific and Technical Information of China (English)

    Wang Lipeng; Yan Ying; Wu Dafang; Wu Hao

    2008-01-01

    On the basis of a 2D 4-node Mindlin shell element method, a novel self-adapting delamination finite element method is presented,which is developed to model the delamination damage of composite laminates. In the method, the sublaminate elements are generated automatically when the delamination damage occurs or extends. Thus, the complex process and state of delamination damage can be simulated practically with high efficiency for both analysis and modeling. Based on the self-adapting delamination method, linear dynamic finite element damage analysis is performed to simulate the low-velocity impact damage process of three types of mixed woven composite laminates. Taking the frictional force among sublaminations during delaminating and the transverse normal stress into account,the analytical results ate consistent with those of the experimental data.

  2. Vibration of a delaminated beam-plate relative to buckled states

    Science.gov (United States)

    Yin, W.-L.; Jane, K. C.

    1992-07-01

    Free vibrations of delaminated beam-plates with respect to postbuckled referential states are studied. If the postbuckling deformation of the referential state is symmetric with respect to the mid-point, then the symmetric and antisymmetric vibration modes are uncoupled. Short delaminations which do not significantly degradate the overall stiffness of the beam-plate have little effect on the lowest modes of vibration and their frequencies, while the presence of a long delamination generally introduces additional vibration frequencies, the associated mode shapes of which show out-of-phase motions of the upper and lower delaminated layers. These new vibration modes and frequencies depend sensitively on the delamination length and location and on the magnitude of the postbuckling load. Hence their detection may indicate the presence and the nature of internal delamination damage.

  3. Fatigue Crack Growth Rate of Inconel 718 Sheet at Cryogenic Temperatures

    Science.gov (United States)

    Wells, Douglas; Wright, Jonathan; Hastings, Keith

    2005-01-01

    Inconel 718 sheet material was tested to determine fatigue crack growth rate (FCGR) at cryogenic conditions representative of a liquid hydrogen (LH2) environment at -423 degree F. Tests utilized M(T) and ESE(T) specimen geometries and environments were either cold gaseous helium or submersion in LH2. The test results support a significant improvement in the fatigue crack growth threshold at -423 degree F compared to -320 degree F or 70 degree F.

  4. DETERMINANTS OF GROWTH RATE: SOME METHODOLOGICAL ISSUES WITH DATA FROM FIJI

    OpenAIRE

    Bhaskara Rao; Maheshwar Rao

    2005-01-01

    Compared to many cross-country studies on the determinants of growth rate, time series approaches are relatively few and limited in scope. However, time series studies are useful for country-specific policies. But in many recent works ad hoc specifications have been used to analyze the contribution of various factors to growth. This paper examines the specification and estimation issues in the time series approach and provides some guidelines. Our approach is used to illustrate the effects of...

  5. Simple Predicting Method for Fatigue Crack Growth Rate Based on Tensile Strength of Carbon Steel

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    Three types of fatigue tests for an annealed carbon steel containing carbon of 0.42 % were carried out on smooth specimens and specimens with a small blind hole in order to investigate the fatigue crack growth law. A simple predicting method for crack growth rates has been proposed involving strength σb and the relation between cyclic stress and strain. The validity of proposed method has been confirmed by experiments on several carbon steels with different loadings.

  6. Maximising electricity production by controlling the biofilm specific growth rate in microbial fuel cells.

    Science.gov (United States)

    Ledezma, Pablo; Greenman, John; Ieropoulos, Ioannis

    2012-08-01

    The aim of this work is to study the relationship between growth rate and electricity production in perfusion-electrode microbial fuel cells (MFCs), across a wide range of flow rates by co-measurement of electrical output and changes in population numbers by viable counts and optical density. The experiments hereby presented demonstrate, for the first time to the authors' knowledge, that the anodic biofilm specific growth rate can be determined and controlled in common with other loose matrix perfusion systems. Feeding with nutrient-limiting conditions at a critical flow rate (50.8 mL h(-1)) resulted in the first experimental determination of maximum specific growth rate μ(max) (19.8 day(-1)) for Shewanella spp. MFC biofilms, which is considerably higher than those predicted or assumed via mathematical modelling. It is also shown that, under carbon-energy limiting conditions there is a strong direct relationship between growth rate and electrical power output, with μ(max) coinciding with maximum electrical power production.

  7. Differential effect of culture temperature and specific growth rate on CHO cell behavior in chemostat culture.

    Science.gov (United States)

    Vergara, Mauricio; Becerra, Silvana; Berrios, Julio; Osses, Nelson; Reyes, Juan; Rodríguez-Moyá, María; Gonzalez, Ramon; Altamirano, Claudia

    2014-01-01

    Mild hypothermia condition in mammalian cell culture technology has been one of the main focuses of research for the development of breeding strategies to maximize productivity of these production systems. Despite the large number of studies that show positive effects of mild hypothermia on specific productivity of r-proteins, no experimental approach has addressed the indirect effect of lower temperatures on specific cell growth rate, nor how this condition possibly affects less specific productivity of r-proteins. To separately analyze the effects of mild hypothermia and specific growth rate on CHO cell metabolism and recombinant human tissue plasminogen activator productivity as a model system, high dilution rate (0.017 h(-1)) and low dilution rate (0.012 h(-1)) at two cultivation temperatures (37 and 33 °C) were evaluated using chemostat culture. The results showed a positive effect on the specific productivity of r-protein with decreasing specific growth rate at 33 °C. Differential effect was achieved by mild hypothermia on the specific productivity of r-protein, contrary to the evidence reported in batch culture. Interestingly, reduction of metabolism could not be associated with a decrease in culture temperature, but rather with a decrease in specific growth rate.

  8. A new mechanistic growth model for simultaneous determination of lag phase duration and exponential growth rate and a new Bĕlehdrádek-type model for evaluating the effect of temperature on growth rate.

    Science.gov (United States)

    Huang, Lihan

    2011-06-01

    A new mechanistic growth model was developed to describe microbial growth under isothermal conditions. The new mathematical model was derived from the basic observation of bacterial growth that may include lag, exponential, and stationary phases. With this model, the lag phase duration and exponential growth rate of a growth curve were simultaneously determined by nonlinear regression. The new model was validated using Listeria monocytogenes and Escherichia coli O157:H7 in broth or meat. Statistical results suggested that both bias factor (B(f)) and accuracy factor (A(f)) of the new model were very close to 1.0. A new Bĕlehdrádek-type rate model and the Ratkowsky square-root model were used to describe the temperature dependence of bacterial growth rate. It was observed that the maximum and minimum temperatures were more accurately estimated by a new Bĕlehdrádek-type rate model. Further, the inverse of square-roots of lag phases was found proportional to temperature, making it possible to estimate the lag phase duration from the growth temperature.

  9. INTEREST RATE, YIELD SPREAD AND ECONOMIC GROWTH: THE CASE OF TURKEY (1990-2006

    Directory of Open Access Journals (Sweden)

    RAHMİ YAMAK

    2013-06-01

    Full Text Available In the literature, the difference between short-term interest rate and long-term interest rate is defined as yield spread or as the slope of the yield curve. The purpose of this study is to test whether yield spread affects the future economic growth for Turkey. For this purpose, in the empircal section of the study, quarterly real gross domestic product and the 3-month and 12-month interest rates are included into the analysis. Inflation rate as the control variable is included into the regressions to increase the validity of the findings. In addition, changes in the GDP are tried to be explained not only by yield spread but also by the level of the interest rates. The main purpose of this inclusion is to determine whether yield spread or interest rate level is effective in forecasting the changes of growth rates. Acording to the findings of the study, in Turkey both yield spread and interest rates affect the future economic growth .

  10. Calcite growth-rate inhibition by fulvic acid and magnesium ion—Possible influence on biogenic calcite formation

    Science.gov (United States)

    Reddy, Michael M.

    2012-08-01

    Increases in ocean surface water dissolved carbon dioxide (CO2) concentrations retard biocalcification by reducing calcite supersaturation (Ωc). Reduced calcification rates may influence growth-rate dependent magnesium ion (Mg) incorporation into biogenic calcite modifying the use of calcifying organisms as paleoclimate proxies. Fulvic acid (FA) at biocalcification sites may further reduce calcification rates. Calcite growth-rate inhibition by FA and Mg, two common constituents of seawater and soil water involved in the formation of biogenic calcite, was measured separately and in combination under identical, highly reproducible experimental conditions. Calcite growth rates (pH=8.5 and Ωc=4.5) are reduced by FA (0.5 mg/L) to 47% and by Mg (10-4 M) to 38%, compared to control experiments containing no added growth-rate inhibitor. Humic acid (HA) is twice as effective a calcite growth-rate inhibitor as FA. Calcite growth rate in the presence of both FA (0.5 mg/L) and Mg (10-4 M) is reduced to 5% of the control rate. Mg inhibits calcite growth rates by substitution for calcium ion at the growth site. In contrast, FA inhibits calcite growth rates by binding multiple carboxylate groups on the calcite surface. FA and Mg together have an increased affinity for the calcite growth sites reducing calcite growth rates.

  11. Calcite growth-rate inhibition by fulvic acid and magnesium ion—Possible influence on biogenic calcite formation

    Science.gov (United States)

    Reddy, Michael M.

    2012-01-01

    Increases in ocean surface water dissolved carbon dioxide (CO2) concentrations retard biocalcification by reducing calcite supersaturation (Ωc). Reduced calcification rates may influence growth-rate dependent magnesium ion (Mg) incorporation into biogenic calcite modifying the use of calcifying organisms as paleoclimate proxies. Fulvic acid (FA) at biocalcification sites may further reduce calcification rates. Calcite growth-rate inhibition by FA and Mg, two common constituents of seawater and soil water involved in the formation of biogenic calcite, was measured separately and in combination under identical, highly reproducible experimental conditions. Calcite growth rates (pH=8.5 and Ωc=4.5) are reduced by FA (0.5 mg/L) to 47% and by Mg (10−4 M) to 38%, compared to control experiments containing no added growth-rate inhibitor. Humic acid (HA) is twice as effective a calcite growth-rate inhibitor as FA. Calcite growth rate in the presence of both FA (0.5 mg/L) and Mg (10−4 M) is reduced to 5% of the control rate. Mg inhibits calcite growth rates by substitution for calcium ion at the growth site. In contrast, FA inhibits calcite growth rates by binding multiple carboxylate groups on the calcite surface. FA and Mg together have an increased affinity for the calcite growth sites reducing calcite growth rates.

  12. Understanding contributions of cohort effects to growth rates of fluctuating populations.

    Science.gov (United States)

    Wittmer, Heiko U; Powell, Roger A; King, Carolyn M

    2007-09-01

    1. Understanding contributions of cohort effects to variation in population growth of fluctuating populations is of great interest in evolutionary biology and may be critical in contributing towards wildlife and conservation management. Cohort-specific contributions to population growth can be evaluated using age-specific matrix models and associated elasticity analyses. 2. We developed age-specific matrix models for naturally fluctuating populations of stoats Mustela erminea in New Zealand beech forests. Dynamics and productivity of stoat populations in this environment are related to the 3-5 year masting cycle of beech trees and consequent effects on the abundance of rodents. 3. The finite rate of increase (lambda) of stoat populations in New Zealand beech forests varied substantially, from 1.98 during seedfall years to 0.58 during post-seedfall years. Predicted mean growth rates for stoat populations in continuous 3-, 4- or 5-year cycles are 0.85, 1.00 and 1.13. The variation in population growth was a consequence of high reproductive success of females during seedfall years combined with low survival and fertility of females of the post-seedfall cohort. 4. Variation in population growth was consistently more sensitive to changes in survival rates both when each matrix was evaluated in isolation and when matrices were linked into cycles. Relative contributions to variation in population growth from survival and fertility, especially in 0-1-year-old stoats, also depend on the year of the cycle and the number of transitional years before a new cycle is initiated. 5. Consequently, management strategies aimed at reducing stoat populations that may be best during one phase of the beech seedfall cycle may not be the most efficient during other phases of the cycle. We suggest that management strategies based on elasticities of vital rates need to consider how population growth rates vary so as to meet appropriate economic and conservation targets.

  13. Monitoring Delamination of Thermal Barrier Coating During Interrupted High-Heat Flux Laser Testing Using Upconversion Luminescence Imaging

    Science.gov (United States)

    Eldridge, Jeffrey I.; Zhu, Dongming; Wolfe, Douglas E.

    2011-01-01

    Upconversion luminescence imaging of thermal barrier coatings (TBCs) has been shown to successfully monitor TBC delamination progression during interrupted furnace cycling. However, furnace cycling does not adequately model engine conditions where TBC-coated components are subjected to significant heat fluxes that produce through-thickness temperature gradients that may alter both the rate and path of delamination progression. Therefore, new measurements are presented based on luminescence imaging of TBC-coated specimens subjected to interrupted high-heat-flux laser cycling exposures that much better simulate the thermal gradients present in engine conditions. The TBCs tested were deposited by electron-beam physical vapor deposition (EB-PVD) and were composed of 7wt% yttria-stabilized zirconia (7YSZ) with an integrated delamination sensing layer composed of 7YSZ co-doped with erbium and ytterbium (7YSZ:Er,Yb). The high-heat-flux exposures that produce the desired through-thickness thermal gradients were performed using a high power CO2 laser operating at a wavelength of 10.6 microns. Upconversion luminescence images revealed the debond progression produced by the cyclic high-heat-flux exposures and these results were compared to that observed for furnace cycling.

  14. Estimating Nursing Wage Bill in Canada and Breaking Down the Growth Rate: 2000 to 2010.

    Science.gov (United States)

    Ariste, Ruolz; Béjaoui, Ali

    2015-05-01

    Even though the nursing professional category (registered nurses [RNs] and licensed practical nurses) made up about one-third of the Canadian health professionals, no study exists about their wage bill, the composition and growth rate of this wage bill. This paper attempts to fill this gap by estimating the nursing wage bill in the Canadian provinces and breaking down the growth rate for the 2000-2010 period, using the 2001 Census and the 2011 National Household Survey. Total wage bill for the nursing professional category in Canada was estimated at $20.1 billion ($17.3 billion for RNs), which suggests that it is as substantial as net physician remuneration. The average annual growth rate of this wage bill was 6.6% for RNs. This increase was mainly driven by real (inflation-adjusted) wage per hour, which was 3.0%, suggesting the existence of a "health premium" of 1.7 percentage points during the study period.

  15. THE EFFECT OF FEEDING Lactobacillus ON GROWTH, SURVIVAL RATE AND PROTEASE ACTIVITY OF Litopenaeus vannamei

    Directory of Open Access Journals (Sweden)

    Nunak Nafiqoh

    2011-12-01

    Full Text Available This study examined the effect of two Lactobacillus bacteria on protease activity and growth rate of Litopenaeus vannamei. An experiment was conducted to examine protease activity and growth rate. The experiment consisted of two treatment tanks, the first tank was provided with artemia immersed in 2.6 x 1016 cfu/mL of bacteria solution, the second tank served as the control tank. After 20 days, the L. vannamei in the tank that received Lactobacillus have significantly different in growth, survival rate and protease activity (P<0.05 compared to the control, but no significant difference between Lactobacillus casei and Lactobacillus plantarum treatments. Within the digestive organ, protease activity of hepatopancreas and stomach demonstrated significant higher activity (P<0.05 compared to the intestine.

  16. Causality Relationship Between Import, Export and Growth Rate in Developing Countries

    Directory of Open Access Journals (Sweden)

    Serhat YUKSEL

    2017-06-01

    Full Text Available In this paper, we tried to determine the relationship between imports, exports and growth rate in developing countries. Within this scope, 6 developing countries (Argentina, Brazil, China, Malaysia, Mexico and Turkey were analyzed in this study. In order to achieve this purpose, annual data for the periods between 1961 and 2014 was tested by using Engle Granger co-integration analysis, Vector Error Correction Model and Toda Yamamoto causality analysis. According to the result of the analysis, it was determined that there is not any relationship among three variables in Brazil and Mexico. On the other hand, we defined that increase in export causes higher growth rate in Argentina. Moreover, it was concluded that there is a causal relationship from import to export in China and Turkey. Furthermore, it was determined that export causes higher import in Malaysia. Therefore, it can be concluded that the relationship between import, export and growth rate is not same for all developing countries..

  17. ANALYSIS OF TUITION GROWTH RATES BASED ON CLUSTERING AND REGRESSION MODELS

    Directory of Open Access Journals (Sweden)

    Long Cheng

    2016-07-01

    Full Text Available Tuition plays a significant role in determining whether a student could afford higher education, which is one of the major driving forces for country development and social prosperity. So it is necessary to fully understand what factors might affect the tuition and how they affect it. However, many existing studies on the tuition growth rate either lack sufficient real data and proper quantitative models to support their conclusions, or are limited to focus on only a few factors that might affect the tuition growth rate, failing to make a comprehensive analysis. In this paper, we explore a wide variety of factors that might affect the tuition growth rate by use of large amounts of authentic data and different quantitative methods such as clustering and regression models.

  18. STRATIFIED MODEL FOR ESTIMATING FATIGUE CRACK GROWTH RATE OF METALLIC MATERIALS

    Institute of Scientific and Technical Information of China (English)

    YANG Yong-yu; LIU Xin-wei; YANG Fan

    2005-01-01

    The curve of relationship between fatigue crack growth rate and the stress strength factor amplitude represented an important fatigue property in designing of damage tolerance limits and predicting life of metallic component parts. In order to have a morereasonable use of testing data, samples from population were stratified suggested by the stratified random sample model (SRAM). The data in each stratum corresponded to the same experiment conditions. A suitable weight was assigned to each stratified sample according to the actual working states of the pressure vessel, so that the estimation of fatigue crack growth rate equation was more accurate for practice. An empirical study shows that the SRAM estimation by using fatigue crack growth rate data from different stoves is obviously better than the estimation from simple random sample model.

  19. Maximum Likelihood based comparison of the specific growth rates for P. aeruginosa and four mutator strains

    DEFF Research Database (Denmark)

    Philipsen, Kirsten Riber; Christiansen, Lasse Engbo; Mandsberg, Lotte Frigaard

    2008-01-01

    that best describes data is a model taking into account the full covariance structure. An inference study is made in order to determine whether the growth rate of the five bacteria strains is the same. After applying a likelihood-ratio test to models with a full covariance structure, it is concluded...... that the specific growth rate is the same for all bacteria strains. This study highlights the importance of carrying out an explorative examination of residuals in order to make a correct parametrization of a model including the covariance structure. The ML method is shown to be a strong tool as it enables......The specific growth rate for P. aeruginosa and four mutator strains mutT, mutY, mutM and mutY–mutM is estimated by a suggested Maximum Likelihood, ML, method which takes the autocorrelation of the observation into account. For each bacteria strain, six wells of optical density, OD, measurements...

  20. Weibel Instability Growth Rate in Magnetized Plasmas with Quasi-Relativistic Distribution Function

    Science.gov (United States)

    Hosseini, Sayed Ahmad; Mahdavi, Mohammad

    2016-12-01

    The mechanism of the Weibel instability is investigated for dense magnetized plasmas. As we know, due to the electron velocity distribution, the Coulomb collision effect of electron-ion and the relativistic properties play an important role in such study. In this study an analytical expression for the growth rate and the condition of restricting the Weibel instability are derived for low-frequency limit. These calculations are done for the oscillation frequency dependence on the electron cyclotron frequency. It is shown that, the relativistic properties of the particle lead to increasing the growth rate of the instability. On the other hand the collision effects and background magnetic field try to decrease the growth rate by decreasing the temperature anisotropy and restricting the particles movement.

  1. Maximum initial growth-rate of strong-shock-driven Richtmyer-Meshkov instability

    Science.gov (United States)

    Dell, Z. R.; Pandian, A.; Bhowmick, A. K.; Swisher, N. C.; Stanic, M.; Stellingwerf, R. F.; Abarzhi, S. I.

    2017-09-01

    We focus on the classical problem of the dependence on the initial conditions of the initial growth-rate of strong shock driven Richtmyer-Meshkov instability (RMI) by developing a novel empirical model and by employing rigorous theories and Smoothed Particle Hydrodynamics simulations to describe the simulation data with statistical confidence in a broad parameter regime. For the given values of the shock strength, fluid density ratio, and wavelength of the initial perturbation of the fluid interface, we find the maximum value of the RMI initial growth-rate, the corresponding amplitude scale of the initial perturbation, and the maximum fraction of interfacial energy. This amplitude scale is independent of the shock strength and density ratio and is characteristic quantity of RMI dynamics. We discover the exponential decay of the ratio of the initial and linear growth-rates of RMI with the initial perturbation amplitude that excellently agrees with available data.

  2. The Balance of Payments Constraint as an Explanation of International Growth Rate Differences

    Directory of Open Access Journals (Sweden)

    Anthony P. Thirlwall

    2011-12-01

    Full Text Available The paper shows that if long-run balance of payments equilibrium on current account is a requirement then a country's long run growth rate can be approximated by the ratio of the growth of exports to the income elasticity of demand for imports. The model fits well the experience of eighteen OECD countries. It is output, not relative prices, that adjusts the balance of payments, contrary to the neoclassical orthodoxy. Growth can be demand constained by the balance of payments.

  3. Retraction pattern of delaminated rotator cuff tears: dual-layer rotator cuff repair

    OpenAIRE

    Cha, Sang-Won; Lee, Choon-Key; Sugaya, Hiroyuki; Kim, Taegyun; Lee, Su-Chan

    2016-01-01

    Background There has been no report to date regarding retraction patterns of delaminated rotator cuff tears. The purpose of this study was to evaluate the incidence and tearing patterns of delamination and repair integrity after the dual-layer repair of delaminated cuff tears. Methods/design A consecutive series of 64 patients with posterosuperior rotator cuff tears underwent arthroscopic rotator cuff repair from August 2011 to September 2012. Among the patients, 53 who received either dual-l...

  4. Delamination Method In English Teaching Can Also Be Applicable In Senior Middle School

    Institute of Scientific and Technical Information of China (English)

    于淑兰; 滕越

    2015-01-01

    The paper makes a research on delamination method in English teaching in senior middle school—a dimension of English teaching.By applying theories of linguistics,the author analyzes the present situation of the application of delamination method in English teaching both in college school and in senior middle school and a conclusion is,then,drawn that delamination English teaching can also be applicable in senior middle school.

  5. Growth rates, seed size, and physiology: do small-seeded species really grow faster?

    Science.gov (United States)

    Turnbull, Lindsay A; Paul-Victor, Cloé; Schmid, Bernhard; Purves, Drew W

    2008-05-01

    Relative growth rate (RGR) is currently the most commonly used method for measuring and comparing species' intrinsic growth potential. Comparative studies have, for example, revealed that small-seeded species have higher RGR, leading to the common belief that small-seeded species possess physiological adaptations for rapid growth that would allow them to outgrow large-seeded species, given sufficient time. We show that, because RGR declines as individual plants grow, it is heavily biased by initial size and does not measure the size-corrected growth potential that determines the outcome of competition in the long-term. We develop a daily growth model that includes a simple mechanistic representation of aboveground and belowground growth and its dependency on plant size and environmental factors. Intrinsic growth potential is encapsulated by the size-independent growth coefficient, G. We parameterized the model using repeated-harvest data from 1724 plants of nine species growing in contrasting nutrient and temperature regimes. Using information-theoretic criteria, we found evidence for interspecific differences in only three of nine model parameters: G, aboveground allocation, and frost damage. With other parameters shared between species, the model accurately reproduced above- and belowground biomass trajectories for all nine species in each set of environmental conditions. In contrast to conventional wisdom, the relationship between G and seed size was positive, despite a strong negative correlation between seed size and average RGR, meaning that large-seeded rather than small-seeded species have higher size-corrected growth potential. Further, we found a significant positive correlation between G and frost damage that, according to simulations, causes rank reversals in final biomass under daily temperature changes of +/- 5 degrees C. We recommend the wider use of this new kind of plant growth analysis as a better way of understanding underlying differences in

  6. Distribution of linear growth rates in different directions in root apical meristems

    Directory of Open Access Journals (Sweden)

    Jerzy Nakielski

    2014-01-01

    Full Text Available Growth of apical meristems in plants may be well described by the growth tensor method. Hejnowicz (Envir. Exp. Bot. 1989, 29 determined growth tensors for roots: one with a minimum and the other with a maximum of the relative elemental growth rate in volume and used them for the description of two types of apices: one with an apical cell and merophytes (I, and the other with files of cells converging towards a quiescent centre, CQ (II. In the present paper the same cases are considered from the point of view of a spatial and directional variation of the relative elemental rate of growth in length, RERG1. Maps of the RERG1 in two planes: axial and tangential, the latter determined by periclinal-longitudinal (PL and periclinal-tangential (PT principal growth directions, are shown. In an apical part of apex i where there is maximum volumetric growth, there also occurs a maximum of RERG1 for all directions. In regions other than this RERG1 decreases although RERG1 in the PL direction predominates everywhere. In apex II RERG1 for all directions has a minimum in CQ and becomes increasingly larger with increasing distance from it - the maximum is in the PL direction in the cylindrical part of the apex. In peripheral parts of both apices, in the place of the root/cap junction, RERG, in the anticlinal direction is significantly small.

  7. Bacterial growth rates are influenced by cellular characteristics of individual species when immersed in electromagnetic fields.

    Science.gov (United States)

    Tessaro, Lucas W E; Murugan, Nirosha J; Persinger, Michael A

    2015-03-01

    Previous studies have shown that exposure to extremely low-frequency electromagnetic fields (ELF-EMFs) have negative effects on the rate of growth of bacteria. In the present study, two Gram-positive and two Gram-negative species were exposed to six magnetic field conditions in broth cultures. Three variations of the 'Thomas' pulsed frequency-modulated pattern; a strong-static "puck" magnet upwards of 5000G in intensity; a pair of these magnets rotating opposite one another at ∼30rpm; and finally a strong dynamic magnetic field generator termed the 'Resonator' with an average intensity of 250μT were used. Growth rate was discerned by optical density (OD) measurements every hour at 600nm. ELF-EMF conditions significantly affected the rates of growth of the bacterial cultures, while the two static magnetic field conditions were not statistically significant. Most interestingly, the 'Resonator' dynamic magnetic field increased the rates of growth of three species (Staphylococcus epidermidis, Staphylococcus aureus, and Escherichia coli), while slowing the growth of one (Serratia marcescens). We suggest that these effects are due to individual biophysical characteristics of the bacterial species.

  8. Effects of lowered pH on marine phytoplankton growth rates

    DEFF Research Database (Denmark)

    Berge, Terje; Daugbjerg, Niels; Andersen, Betinna Balling

    2010-01-01

    concentration of seawater. Ocean acidification may potentially both stimulate and reduce primary production by marine phytoplankton. Data are scarce on the response of marine phytoplankton growth rates to lowered pH/increased CO2. Using the acid addition method to lower the seawater pH and manipulate...... the carbonate system, we determined in detail the lower pH limit for growth rates of 2 model species of common marine phytoplankton. We also tested whether growth and production rates of 6 other common species of phytoplankton were affected by ocean acidification (lowered to pH 7.0). The lower pH limits...... statistically similar in the pH range of ~7.0 to 8.5. Our results and literature reports on growth at lowered pH indicate that marine phytoplankton in general are resistant to climate change in terms of ocean acidification, and do not increase or decrease their growth rates according to ecological relevant...

  9. Stress-induced martensitic transformation in metastable austenitic stainless steels: Effect on fatigue crack growth rate

    Science.gov (United States)

    Khan, Z.; Ahmed, M.

    1996-04-01

    This paper addresses the influence of cyclic stress-induced martensitic transformation on fatigue crack growth rates in metastable austenitic stainless steels. At low applied stress and mean stress values in AISI type 301 stainless steel, fatigue crack growth rate is substantially retarded due to a cyclic stress-induced γ-α' and γ-ɛ martensitic transformation occurring at the crack-tip plastic zone. It is suggested that the transformation products produce a compressive residual stress at the tip of the fatigue crack, which essentially lowers the effective stress intensity and hence retards the fatigue crack growth rate. At high applied stress or mean stress values, fatigue crack growth rates in AISI type 301 steels become almost equal to those of stable AISI type 302 alloy. As the amount of transformed products increases (with an increase in applied or mean stress), the strain-hardening effect brought about by the transformed martensite phase appears to accelerate fatigue crack growth, offsetting the contribution from the compressive residual stress produced by the positive volume change of γ → α' or ɛ transformation.

  10. Influence of arterial geometry on a model for growth rate of atheromas

    Energy Technology Data Exchange (ETDEWEB)

    Gessaghi, Valeria C [Facultad de Ingenieria, Universidad Nacional de La Pampa, General Pico, La Pampa (Argentina); Raschi, Marcelo A [Facultad de Ingenieria y Ciencias Exactas y Centro de Estudios Avanzados, Universidad Argentina de la Empresa, Ciudad Autonoma de Buenos Aires (Argentina); Larreteguy, Axel E [Facultad de Ingenieria y Ciencias Exactas y Centro de Estudios Avanzados, Universidad Argentina de la Empresa, Ciudad Autonoma de Buenos Aires (Argentina); Perazzo, Carlos A [Facultad de Ingenieria y Ciencias Exactas y Naturales, Universidad de Favaloro, Ciudad Autonoma de Buenos Aires, Argentina y CONICET (Argentina)

    2007-11-15

    Atherosclerosis is a disease that affects medium and large size arteries and it can partially or totally obstruct blood flow through them. The lack of blood supply to the heart or the brain can cause an infarct or a stroke with fatal consequences or permanent effects. This disease involves the proliferation of cells and the accumulation of fat, cholesterol, cell debris, calcium and other substances in the artery wall. Such accumulation results in the formation of atherosclerotic plaques called atheromas, which may cause the obstruction of the blood flow. Cardiovascular diseases, among which atherosclerosis is the most frequent, are the first cause of death in developed countries. The published works in the subject suggest that hemodynamic forces on arterial walls have influence on the localization, initial development and growth rate of atheromas. This paper presents a model for this growth rate, and explores the influence of the bifurcation angle on the blood flow patterns and on the predictions of the model in a simplified carotid artery. The choice of the carotid bifurcation as the subject for this study obeys the fact that atheromas in this artery are often responsible for strokes. Our model predicts a larger initial growth rate in the external walls of the bifurcation and smaller growth area and lower growth rates as the bifurcation angle is increased. The reason for this seems to be the appearance of helical flow patterns as the angle is increased.

  11. Modeling circadian clock-cell cycle interaction effects on cell population growth rates.

    Science.gov (United States)

    El Cheikh, R; Bernard, S; El Khatib, N

    2014-12-21

    The circadian clock and the cell cycle are two tightly coupled oscillators. Recent analytical studies have shown counter-intuitive effects of circadian gating of the cell cycle on growth rates of proliferating cells which cannot be explained by a molecular model or a population model alone. In this work, we present a combined molecular-population model that studies how coupling the circadian clock to the cell cycle, through the protein WEE1, affects a proliferating cell population. We show that the cell cycle can entrain to the circadian clock with different rational period ratios and characterize multiple domains of entrainment. We show that coupling increases the growth rate for autonomous periods of the cell cycle around 24 h and above 48 h. We study the effect of mutation of circadian genes on the growth rate of cells and show that disruption of the circadian clock can lead to abnormal proliferation. Particularly, we show that Cry 1, Cry 2 mutations decrease the growth rate of cells, Per 2 mutation enhances it and Bmal 1 knockout increases it for autonomous periods of the cell cycle less than 21 h and decreases it elsewhere. Combining a molecular model to a population model offers new insight on the influence of the circadian clock on the growth of a cell population. This can help chronotherapy which takes benefits of physiological rhythms to improve anti-cancer efficacy and tolerance to drugs by administering treatments at a specific time of the day.

  12. Measuring selection in human populations using the growth rate per generation.

    Science.gov (United States)

    Ewbank, Douglas

    2016-04-19

    Estimates of the speed of evolution between generations depend on the association between individual traits and a measure of fitness. The two most frequently used measures of fitness are the net reproduction rate and the 1-year growth factor implied by the fertility and mortality rates. Results based on the two lead to very different results. The reason is that the 1-year growth factor is not a measure of change between generations. Therefore, studies of changes between generations should use the amount of growth over the length of a generation. This is especially important for studies of human populations because of the long length of generation. In addition, estimates based on a single year's growth are overly sensitive to data on individuals who fail to reproduce. The effects of using a generational measure are demonstrated using data from Kenya and Ukraine. These results demonstrate that using a 1-year growth rate to measure fitness leads to estimates that understate the rate at which evolution changes the characteristics of a human population.

  13. L-harmonic functions with polynomial growth of a fixed rate

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    Yau made the following conjecture:For a complete noncompact manifold with nonnegative Ricci curvature the space of harmonic functions with polynomial growth of a fixed rate is finite dimensional.we extend the result on the Laplace operator to that on the symmetric diffusion operator,and prove the space of L-harmonic functions with polynomial growth of a fixed rate is finitedimensional,when m-dimensional Bakery-Emery Ricci curvature of the symmetric diffusion operator on the complete noncompact Riemannian manifold is nonnegative.

  14. L-harmonic functions with polynomial growth of a fixed rate

    Institute of Scientific and Technical Information of China (English)

    ZHOU ChaoHui; CHEN ZhiHua

    2009-01-01

    Yau made the following conjecture: For a complete noncompact manifold with nonnegative Ricci curvature the space of harmonic functions with polynomial growth of a fixed rate is finite dimensional,we extend the result on the Laplace operator to that on the symmetric diffusion operator,and prove the space of L-harmonic functions with polynomial growth of a fixed rate is finitedimensional,when m-dimensional Bakery-Emery Ricci curvature of the symmetric diffusion operator on the complete noncompact Riemannian manifold is nonnegative.

  15. Collaborative Project: Understanding the Chemical Processes tat Affect Growth rates of Freshly Nucleated Particles

    Energy Technology Data Exchange (ETDEWEB)

    McMurry, Peter [Univ. of Minnesota, Minneapolis, MN (United States); Smuth, James [University Corporation for Atmospheric Research, Irvine, CA (United States)

    2015-11-12

    This final technical report describes our research activities that have, as the ultimate goal, the development of a model that explains growth rates of freshly nucleated particles. The research activities, which combine field observations with laboratory experiments, explore the relationship between concentrations of gas-phase species that contribute to growth and the rates at which those species are taken up. We also describe measurements of the chemical composition of freshly nucleated particles in a variety of locales, as well as properties (especially hygroscopicity) that influence their effects on climate.

  16. A study on the rate of contribution of education investment to the economic growth in China

    Institute of Scientific and Technical Information of China (English)

    Fan Bo-nai; Lai Xiong-xiang

    2006-01-01

    There is an evident bi-directional causality relationship between education investment and economic growth based on an analysis of statistics from 1952 to 2003 released by the State Statistics Bureau.A generalized difference regression model is set up to investigate the relationship between the two.Studies show that the rate of contribution of education investment to economic growth was 24.4 percent from 1952 to 2003.Further examination indicates that after the market-oriented economy restructuring,this rate increased by a wide margin of 7 percent,from 22.8 percent to 29.7 percent.

  17. Revisiting the Numerical Convergence of Cohesive-Zone Models in Simulating the Delamination of Composite Adhesive Joints by Using the Finite-Element Analysis

    Science.gov (United States)

    Liu, P. F.; Gu, Z. P.; Hu, Z. H.

    2016-11-01

    Delamination is the dominating failure mechanism in composite adhesive joints. A deep insight into the delamination failure mechanism requires advanced numerical methods. Currently, cohesive-zone models (CZMs), in combination with the finite-element analysis (FEA), have become powerful tools for modeling the initiation and growth of delaminations in composites. However, ensuring the numerical convergence in the CZMs used for a delamination analysis of three-dimensional (3D) composite structures is always a challenging issue due to the "snap-back" instability in the nonlinear implicit FEA, which arises mainly from the cohesive softening behavior. Based on the midplane interpolation technique, first numerical techniques for implementing 3D bilinear and exponential CZMs by using ABAQUS-UEL (user element subroutine) are developed in this paper. In particular, a viscous regularization by introducing the damping effect into the stiffness equation is used to improve the convergence. Two examples, a single-lap composite joint and a composite skin/stiffener panel under tension, demonstrate the numerical technique developed. Then, the effect of cohesion parameters on the numerical convergence based on the viscous regularization is studied.

  18. Short review: Potential impact of delamination cracks on fracture toughness of structural materials

    Directory of Open Access Journals (Sweden)

    X.C. Arnoult

    2016-02-01

    Full Text Available The current energy policy envisages extended lifetime for the current nuclear power plants (GEN II NPP. This policy imposes a large research effort to understand the ageing of power plant components. In this goal, it is necessary to improve knowledge about safety, reliability and components’ integrity for more than forty years of operation. In Central and Eastern Europe, the majority of NPPs are VVER types, where some of the components are produced from austenitic steel 08Ch18N10T. Irradiated 08Ch18N10T may exhibit brittle behavior, namely delamination cracks are found in some cases on the fracture surface of irradiated 08Ch18N10T with elongated δ-ferrite. Delamination cracks have also been observed on the fracture surface of high-strength steels or aluminum-lithium alloys. This article presents a state-of-the art review to provide a detailed analysis of the influence of delamination cracks on the toughness of metal alloys. In general, the delamination cracks are present in metal alloys having a high texture and microstructure anisotropy. Three types of delamination cracks have been observed and are classified as crack arrester delamination, crack divider delamination and crack splitting delamination. The microscopy characterization, 3D fracture theories and computational studies explaining possible causes and effects of delamination cracks on the mechanical properties of metal alloys are presented.

  19. Data compilation of respiration, feeding, and growth rates of marine pelagic organisms

    DEFF Research Database (Denmark)

    2013-01-01

    's adaptation to the environment, with consequently less universal mass scaling properties. Data on body mass, maximum ingestion and clearance rates, respiration rates and maximum growth rates of animals living in the ocean epipelagic were compiled from the literature, mainly from original papers but also from...... previous compilations by other authors. Data were read from tables or digitized from graphs. Only measurements made on individuals of know size, or groups of individuals of similar and known size were included. We show that clearance and respiration rates have life-form-dependent allometries that have...

  20. Survival, recruitment, and population growth rate of an important mesopredator: the northern raccoon.

    Directory of Open Access Journals (Sweden)

    Elizabeth M Troyer

    Full Text Available Populations of mesopredators (mid-sized mammalian carnivores are expanding in size and range amid declining apex predator populations and ever-growing human presence, leading to significant ecological impacts. Despite their obvious importance, population dynamics have scarcely been studied for most mesopredator species. Information on basic population parameters and processes under a range of conditions is necessary for managing these species. Here we investigate survival, recruitment, and population growth rate of a widely distributed and abundant mesopredator, the northern raccoon (Procyon lotor, using Pradel's temporal symmetry models and >6 years of monthly capture-mark-recapture data collected in a protected area. Monthly apparent survival probability was higher for females (0.949, 95% CI = 0.936-0.960 than for males (0.908, 95% CI = 0.893-0.920, while monthly recruitment rate was higher for males (0.091, 95% CI = 0.078-0.106 than for females (0.054, 95% CI = 0.042-0.067. Finally, monthly realized population growth rate was 1.000 (95% CI = 0.996-1.004, indicating that our study population has reached a stable equilibrium in this relatively undisturbed habitat. There was little evidence for substantial temporal variation in population growth rate or its components. Our study is one of the first to quantify survival, recruitment, and realized population growth rate of raccoons using long-term data and rigorous statistical models.

  1. Microscopic Rate Constants of Crystal Growth from Molecular Dynamic Simulations Combined with Metadynamics

    Directory of Open Access Journals (Sweden)

    Dániel Kozma

    2012-01-01

    Full Text Available Atomistic simulation of crystal growth can be decomposed into two steps: the determination of the microscopic rate constants and a mesoscopic kinetic Monte Carlo simulation. We proposed a method to determine kinetic rate constants of crystal growth. We performed classical molecular dynamics on the equilibrium liquid/crystal interface of argon. Metadynamics was used to explore the free energy surface of crystal growth. A crystalline atom was selected at the interface, and it was displaced to the liquid phase by adding repulsive Gaussian potentials. The activation free energy of this process was calculated as the maximal potential energy density of the Gaussian potentials. We calculated the rate constants at different interfacial structures using the transition state theory. In order to mimic real crystallization, we applied a temperature difference in the calculations of the two opposite rate constants, and they were applied in kinetic Monte Carlo simulation. The novelty of our technique is that it can be used for slow crystallization processes, while the simple following of trajectories can be applied only for fast reactions. Our method is a possibility for determination of elementary rate constants of crystal growth that seems to be necessary for the long-time goal of computer-aided crystal design.

  2. Sex-based differences in Adelie penguin (Pygoscelis adeliae) chick growth rates.

    Science.gov (United States)

    Jennings, Scott; Varsani, Arvind; Dugger, Catherine; Ballard, Grant; Ainley, David G.

    2016-01-01

    Sexually size-dimorphic species must show some difference between the sexes in growth rate and/or length of growing period. Such differences in growth parameters can cause the sexes to be impacted by environmental variability in different ways, and understanding these differences allows a better understanding of patterns in productivity between individuals and populations. We investigated differences in growth rate and diet between male and female Adélie Penguin (Pygoscelis adeliae) chicks during two breeding seasons at Cape Crozier, Ross Island, Antarctica. Adélie Penguins are a slightly dimorphic species, with adult males averaging larger than adult females in mass (~11%) as well as bill (~8%) and flipper length (~3%). We measured mass and length of flipper, bill, tibiotarsus, and foot at 5-day intervals for 45 male and 40 female individually-marked chicks. Chick sex was molecularly determined from feathers. We used linear mixed effects models to estimate daily growth rate as a function of chick sex, while controlling for hatching order, brood size, year, and potential variation in breeding quality between pairs of parents. Accounting for season and hatching order, male chicks gained mass an average of 15.6 g d-1 faster than females. Similarly, growth in bill length was faster for males, and the calculated bill size difference at fledging was similar to that observed in adults. There was no evidence for sex-based differences in growth of other morphological features. Adélie diet at Ross Island is composed almost entirely of two species—one krill (Euphausia crystallorophias) and one fish (Pleuragramma antarctica), with fish having a higher caloric value. Using isotopic analyses of feather samples, we also determined that male chicks were fed a higher proportion of fish than female chicks. The related differences in provisioning and growth rates of male and female offspring provides a greater understanding of the ways in which ecological factors may impact

  3. Morphology and mycelial growth rate of Pleurotus spp. strains from the Mexican mixtec region.

    Science.gov (United States)

    Guadarrama-Mendoza, P C; del Toro, G Valencia; Ramírez-Carrillo, R; Robles-Martínez, F; Yáñez-Fernández, J; Garín-Aguilar, M E; Hernández, C G; Bravo-Villa, G

    2014-01-01

    Two native Pleurotus spp. strains (white LB-050 and pale pink LB-051) were isolated from rotten tree trunks of cazahuate (Ipomoea murucoides) from the Mexican Mixtec Region. Both strains were chemically dedikaryotized to obtain their symmetrical monokaryotic components (neohaplonts). This was achieved employing homogenization time periods from 60 to 65 s, and 3 day incubation at 28 °C in a peptone-glucose solution (PGS). Pairing of compatible neohaplonts resulted in 56 hybrid strains which were classified into the four following hybrid types: (R(1-n)xB(1-n), R(1-n)xB(2-1), R(2-n)xB(1-n) and R(2-n)xB(2-1)). The mycelial growth of Pleurotus spp. monokaryotic and dikaryotic strains showed differences in texture (cottony or floccose), growth (scarce, regular or abundant), density (high, regular or low), and pigmentation (off-white, white or pale pink). To determine the rate and the amount of mycelium growth in malt extract agar at 28 °C, the diameter of the colony was measured every 24 h until the Petri dish was completely colonized. A linear model had the best fit to the mycelial growth kinetics. A direct relationship between mycelial morphology and growth rate was observed. Cottony mycelium presented significantly higher growth rates (p < 0.01) in comparison with floccose mycelium. Thus, mycelial morphology can be used as criterion to select which pairs must be used for optimizing compatible-mating studies. Hybrids resulting from cottony neohaplonts maintained the characteristically high growth rates of their parental strains with the hybrid R(1-n)xB(1-n) being faster than the latter.

  4. Tropical dendrochemistry: A novel approach for reconstructing seasonally-resolved growth rates from ringless tropical trees

    Science.gov (United States)

    Poussart, P. M.; Myneni, S. C.

    2005-12-01

    Although tropical forests play an active role in the global carbon cycle and are host to a variety of pristine paleoclimate archives, they remain poorly characterized as compared to other ecosystems on the planet. In particular, dating and reconstructing the growth rate history of tropical trees remains a challenge and continues to delay research efforts towards understanding tropical forest dynamics. Traditional dendrochronological techniques have found limited applications in the tropics because temperature seasonality is often too small to initiate the production of visible annual growth rings. Dendrometers, cambium scarring methods and sub-annual records of oxygen and carbon isotopes from tree cellulose may be used to estimate growth rate histories when growth rings are absent. However, dendrometer records rarely extend beyond the past couple of decades and the generation of seasonally-resolved isotopic records remains labour intensive, currently prohibiting the level of record replication necessary for statistical analysis. Here, we present evidence that Ca may also be used as a proxy for dating and reconstructing growth rates of trees lacking visible growth rings. Using the Brookhaven National Lab Synchrotron, we recover a radial record of cyclic variations in Ca from a Miliusa velutina tree from northern Thailand. We determine that the Ca cycles are seasonal based on a comparison between radiocarbon age estimates and a trace element age model, which agree within 2 years over the period of 1955 to 2000. The amplitude of the Ca annual cycle is significantly correlated with growth rate estimates, which are also correlated to the amount of dry season rainfall. The measurements at the Synchrotron are fast, non-destructive and require little sample preparation. Application of this technique in the tropics holds the potential to resolve longstanding questions about tropical forest dynamics and interannual to decadal changes in the carbon cycle.

  5. Sex-Based Differences in Adelie Penguin (Pygoscelis adeliae Chick Growth Rates and Diet.

    Directory of Open Access Journals (Sweden)

    Scott Jennings

    Full Text Available Sexually size-dimorphic species must show some difference between the sexes in growth rate and/or length of growing period. Such differences in growth parameters can cause the sexes to be impacted by environmental variability in different ways, and understanding these differences allows a better understanding of patterns in productivity between individuals and populations. We investigated differences in growth rate and diet between male and female Adélie Penguin (Pygoscelis adeliae chicks during two breeding seasons at Cape Crozier, Ross Island, Antarctica. Adélie Penguins are a slightly dimorphic species, with adult males averaging larger than adult females in mass (~11% as well as bill (~8% and flipper length (~3%. We measured mass and length of flipper, bill, tibiotarsus, and foot at 5-day intervals for 45 male and 40 female individually-marked chicks. Chick sex was molecularly determined from feathers. We used linear mixed effects models to estimate daily growth rate as a function of chick sex, while controlling for hatching order, brood size, year, and potential variation in breeding quality between pairs of parents. Accounting for season and hatching order, male chicks gained mass an average of 15.6 g d(-1 faster than females. Similarly, growth in bill length was faster for males, and the calculated bill size difference at fledging was similar to that observed in adults. There was no evidence for sex-based differences in growth of other morphological features. Adélie diet at Ross Island is composed almost entirely of two species--one krill (Euphausia crystallorophias and one fish (Pleuragramma antarctica, with fish having a higher caloric value. Using isotopic analyses of feather samples, we also determined that male chicks were fed a higher proportion of fish than female chicks. The related differences in provisioning and growth rates of male and female offspring provides a greater understanding of the ways in which ecological factors

  6. Morphology and mycelial growth rate of Pleurotus spp. strains from the Mexican mixtec region

    Directory of Open Access Journals (Sweden)

    P.C. Guadarrama-Mendoza

    2014-09-01

    Full Text Available Two native Pleurotus spp. strains (white LB-050 and pale pink LB-051 were isolated from rotten tree trunks of cazahuate (Ipomoea murucoides from the Mexican Mixtec Region. Both strains were chemically dedikaryotized to obtain their symmetrical monokaryotic components (neohaplonts. This was achieved employing homogenization time periods from 60 to 65 s, and 3 day incubation at 28 °C in a peptone-glucose solution (PGS. Pairing of compatible neohaplonts resulted in 56 hybrid strains which were classified into the four following hybrid types: (R1-n xB1-n, R1-n xB2-1, R2-n xB1-n and R2-n xB2-1. The mycelial growth of Pleurotus spp. monokaryotic and dikaryotic strains showed differences in texture (cottony or floccose, growth (scarce, regular or abundant, density (high, regular or low, and pigmentation (off-white, white or pale pink. To determine the rate and the amount of mycelium growth in malt extract agar at 28 °C, the diameter of the colony was measured every 24 h until the Petri dish was completely colonized. A linear model had the best fit to the mycelial growth kinetics. A direct relationship between mycelial morphology and growth rate was observed. Cottony mycelium presented significantly higher growth rates (p < 0.01 in comparison with floccose mycelium. Thus, mycelial morphology can be used as criterion to select which pairs must be used for optimizing compatible-mating studies. Hybrids resulting from cottony neohaplonts maintained the characteristically high growth rates of their parental strains with the hybrid R1-n xB1-n being faster than the latter.

  7. Data compilation of respiration, feeding, and growth rates of marine pelagic organisms

    DEFF Research Database (Denmark)

    2013-01-01

    The metabolic rate of organisms may either be viewed as a basic property from which other vital rates and many ecological patterns emerge and that follows a universal allometric mass scaling law; or it may be considered a property of the organism that emerges as a result of the organism's adaptat......The metabolic rate of organisms may either be viewed as a basic property from which other vital rates and many ecological patterns emerge and that follows a universal allometric mass scaling law; or it may be considered a property of the organism that emerges as a result of the organism...... similar scaling but different elevations, such that the mass-specific rates converge on a rather narrow size-independent range. In contrast, ingestion and growth rates follow a near-universal taxa-independent ~3/4 mass scaling power law. We argue that the declining mass-specific clearance rates with size...

  8. Etabolism in compensatory growth . III. The urea, glucose and C02 entry rates in animal undergoing compensatory growth

    Directory of Open Access Journals (Sweden)

    Pram Mahyudin

    1996-03-01

    Full Text Available Glucose (GER, Urea (UER and C02 (C02 ER entry rates were studied at four points in the growth curve viz: before feed restriction (PI after 8 weeks of feed restriction (P2, after 3 weeks (P3 and 15 weeks (P4 following resumption ofad libitum feeding. Sixteen Merino wethers were used and offerred pelleted lucerne (Medicago sativa ad libitum for 3 weeks; then they were divided into 2 groups of eight. Group I continued to be fed ad libitum and Group 11 was fed pelleted lucerne at half maintenance level for 8 weeks and then fed ad libitum until the end of experiment. During feed restriction (P2, UER, urinary urea and urea transferred from the blood to the gut were 74% lower in group II than those in group I due to the reduction of N intake . At P2 GER and C02ER were also lower (53% and 56%, respectively because of the reduction of available glucose precursor and metabolic rate. Similarly AV concentration difference of glucose, glucose taken up by the hind-limb muscle and the percentage of glucose taken up by muscle that was oxidised were reduced by 52%, 86% and 48%, respectively . When animals resumed ad libitum feeding, the components of urea entry rate (except plasma urea concentration, GER and C02ER were markedly increased indicating A switch to the anabolic mode, followed by increased glucose taken up and oxidised by the hind-limb muscle . The significance of glucose in muscle metabolism during compensatory growth was shown in the dramatic increase in the actual rate of glucose oxidation per unit muscle weight . It appears that the priority of usage of glucose taken up by muscle during compensatory growth is for oxidation to both C02 and lactate.

  9. Using wavelength-normalized optical spectroscopy to improve the accuracy of bacteria growth rate quantification

    Science.gov (United States)

    McBirney, Samantha E.; Trinh, Kristy; Wong-Beringer, Annie; Armani, Andrea M.

    2017-02-01

    One of the fundamental analytical measurements performed in microbiology is monitoring and characterizing cell concentration in culture media. Measurement error will give rise to reproducibility problems in a wide range of applications, from biomanufacturing to basic research. Therefore, it is critical that the generated results are consistent. Single wavelength optical density (OD) measurements have become the preferred approach. Here, we compare the conventional OD600 technique with a multi-wavelength normalized scattering optical spectroscopy method to measure the growth rates of Pseudomonas aeruginosa and Staphylococcus aureus, two of the leading nosocomial pathogens with proven abilities to develop resistance. The multi-wavelength normalization process minimizes the impact of bacteria byproducts and environmental noise on the signal, thereby accurately quantifying growth rates with high fidelity at low concentrations. In contrast, due to poor absorbance and scattering at 600 nm, the classic OD600 measurement method is able to detect bacteria but cannot quantify the growth rate reliably. Our wavelength-normalization protocol to detect bacteria growth rates can be readily and easily adopted by research labs, given that it only requires the use of a standard spectrophotometer and implementation of straightforward data analysis. Measuring and monitoring bacteria growth rates play a critical role in a wide range of settings, spanning from therapeutic design and development to diagnostics and disease prevention. Having a full understanding of the growth cycles of bacteria known to cause severe infections and diseases will lead to a better understanding of the pathogenesis of these illnesses, leading to better treatment and, ultimately, the development of a cure.

  10. On the Biomass Specific Growth Rates Estimation for Anaerobic Digestion using Differential Algebraic Techniques

    Directory of Open Access Journals (Sweden)

    Sette Diop

    2009-10-01

    Full Text Available The paper deals with identifiability and observability of anaerobic digestion (AD processes. In such kind of processes, generally carried out in continuously stirred tank bioreactors, the organic matter is depolluted by microorganisms into biogas and compost in the absence of oxygen. The biogas is an additional energy source, which can replace fossil fuel sources. The differential algebraic approach of general observation problems has been applied to investigate the identification and observation of a simple AD model. The major discovery is that the biomass specific growth rate can be stably estimated from easily measured quantities: the dilution rate and the biogas flow rate. Next if the yield coefficients are assumed known then, of course, the biomass concentration is observable. Unfortunately, even under the latter strongest assumption the substrate concentration is not observable. This concentration becomes observable if an additional model, say the Monod model, is assumed for the specific growth rate. Illustrative simulations are presented.

  11. Study on release rate of latent heat in Czochralski silicon growth

    Institute of Scientific and Technical Information of China (English)

    REN Bingyan; YANG Jiankun; LI Yanlin; LIU Xiaoping; WANG Minhua

    2006-01-01

    The pulling rate in czochralski silicon (CZSi) growth is important for reducing the cost of solar cell.In this paper, double-heater, heat shield and composite argon duct system were introduced in the Ф450 mm hot zone of a Czochralski furnace.The pulling rate under different thermal system was recorded in experiments.Argon flow and temperature fields were simulated by finite element method(FEM).Experimental results and numerical simulation indicate that double-heater and composite argon duct system can enhance obviously the release rate of latent heat.In Φ 200 mm Czochralski silicon (CZSi) growth, average pulling rate can increase from 0.6 mm·min-1 in the conventional hot zone to 0.8 mm·min-1 in the modified hot zone.

  12. Growth rates and the prevalence and progression of scoliosis in short-statured children on Australian growth hormone treatment programmes

    Directory of Open Access Journals (Sweden)

    McPhee Ian

    2007-02-01

    Full Text Available Abstract Study design and aim This was a longitudinal chart review of a diverse group (cohort of patients undergoing HGH (Human Growth Hormone treatment. Clinical and radiological examinations were performed with the aim to identify the presence and progression of scoliosis. Methods and cohort 185 patients were recruited and a database incorporating the age at commencement, dose and frequency of growth hormone treatment and growth charts was compiled from their Medical Records. The presence of any known syndrome and the clinical presence of scoliosis were included for analysis. Subsequently, skeletally immature patients identified with scoliosis were followed up over a period of a minimum four years and the radiologic type, progression and severity (Cobb angle of scoliosis were recorded. Results Four (3.6% of the 109 with idiopathic short stature or hormone deficiency had idiopathic scoliosis (within normal limits for a control population and scoliosis progression was not prospectively observed. 13 (28.8% of 45 with Turner syndrome had scoliosis radiologically similar to idiopathic scoliosis. 11 (48% of 23 with varying syndromes, had scoliosis. In the entire cohort, the growth rates of those with and without scoliosis were not statistically different and HGH treatment was not ceased because of progression of scoliosis. Conclusion In this study, there was no evidence of HGH treatment being responsible for progression of scoliosis in a small number of non-syndromic patients (four. An incidental finding was that scoliosis, similar to the idiopathic type, appears to be more prevalent in Turner syndrome than previously believed.

  13. Ductile film delamination from compliant substrates using hard overlayers

    Science.gov (United States)

    Cordill, M.J.; Marx, V.M.; Kirchlechner, C.

    2014-01-01

    Flexible electronic devices call for copper and gold metal films to adhere well to polymer substrates. Measuring the interfacial adhesion of these material systems is often challenging, requiring the formulation of different techniques and models. Presented here is a strategy to induce well defined areas of delamination to measure the adhesion of copper films on polyimide substrates. The technique utilizes a stressed overlayer and tensile straining to cause buckle formation. The described method allows one to examine the effects of thin adhesion layers used to improve the adhesion of flexible systems. PMID:25641995

  14. Undulatory delamination of thin polymer films on gold surfaces.

    Science.gov (United States)

    Chah, Soonwoo; Noolandi, Jaan; Zare, Richard N

    2005-10-20

    Using two-dimensional surface plasmon resonance measurements, we have observed the formation of traveling waves in the delamination of thin films of polydimethylsilane (PDMS) exposed to methanol. Films were spin-coated on a gold surface and the methanol was added to the top surface. The stress-induced instability caused by the swelling of the PDMS thin film when its edge is pinned to the gold surface leads to wrinkle formation and propagation at the interface. The periodic pattern is thought to be the result of an Asaro-Tiller-Grinfeld (ATG) instability.

  15. Effect of reactor pressure on the growth rate and structural properties of GaN films

    Institute of Scientific and Technical Information of China (English)

    NI JinYu; HAO Yue; ZHANG JinCheng; YANG LinAn

    2009-01-01

    The effect of reactor pressure on the growth rate,surface morphology and crystalline quality of GaN films grown on sapphire by metalorganic chemical vapor deposition is studied.The results show that as the reactor pressure increases from 2500 to 20000 Pa,the GaN surface becomes rough and the growth rate of GaN films decreases.The rough surface morphology is associated with the initial high temperature GaN islands,which are large with low density due to low adatom surface diffusion under high reactor pressure.These islands prolong the occurrence of 2D growth mode and decrease the growth rate of GaN film.Meanwhile,the large GaN islands with low density lead to the reduction of threading dislocation density during subsequent island growth and coalescence,and consequently decrease the full width at half maximum of X-ray rocking curve of the GaN film.

  16. Temperature Effects on the Growth Rates and Photosynthetic Activities of Symbiodinium Cells

    Directory of Open Access Journals (Sweden)

    Widiastuti Karim

    2015-06-01

    Full Text Available Coral bleaching is caused by environmental stress and susceptibility to bleaching stress varies among types of coral. The physiological properties of the algal symbionts (Symbiodinium spp., especially extent of damage to PSII and its repair capacity, contribute importantly to this variability in stress susceptibility. The objective of the present study was to investigate the relationship between the growth rates and photosynthetic activities of six cultured strains of Symbiodinium spp. (clades A, B, C, D, and F at elevated temperature (33 °C. We also observed the recovery of photodamaged-PSII in the presence or absence of a chloroplast protein synthesis inhibitor (lincomycin. The growth rates and photochemical efficiencies of PSII (Fv/Fm decreased in parallel at high temperature in thermally sensitive strains, B-K100 (clade B followed by culture name and A-Y106, but not in thermally tolerant strains, F-K102 and D-K111. In strains A-KB8 and C-Y103, growth declined markedly at high temperature, but Fv/Fm decreased only slightly. These strains may reallocate energy from growth to the repair of damaged photosynthetic machineries or protection pathways. Alternatively, since recoveries of photo-damaged PSII at 33 °C were modest in strains A-KB8 and C-Y103, thermal stressing of other metabolic pathways may have reduced growth rates in these two strains. This possibility should be explored in future research efforts.

  17. A transcription factor links growth rate and metabolism in the hypersaline adapted archaeon Halobacterium salinarum.

    Science.gov (United States)

    Todor, Horia; Dulmage, Keely; Gillum, Nicholas; Bain, James R; Muehlbauer, Michael J; Schmid, Amy K

    2014-09-01

    Co-ordinating metabolism and growth is a key challenge for all organisms. Despite fluctuating environments, cells must produce the same metabolic outputs to thrive. The mechanisms underlying this 'growth homeostasis' are known in bacteria and eukaryotes, but remain unexplored in archaea. In the model archaeon Halobacterium salinarum, the transcription factor TrmB regulates enzyme-coding genes in diverse metabolic pathways in response to glucose. However, H. salinarum is thought not to catabolize glucose. To resolve this discrepancy, we demonstrate that TrmB regulates the gluconeogenic production of sugars incorporated into the cell surface S-layer glycoprotein. Additionally, we show that TrmB-DNA binding correlates with instantaneous growth rate, likely because S-layer glycosylation is proportional to growth. This suggests that TrmB transduces a growth rate signal to co-regulated metabolic pathways including amino acid, purine, and cobalamin biosynthesis. Remarkably, the topology and function of this growth homeostatic network appear conserved across domains despite extensive alterations in protein components.

  18. Molecular analysis of the in situ growth rates of subsurface Geobacter species.

    Science.gov (United States)

    Holmes, Dawn E; Giloteaux, Ludovic; Barlett, Melissa; Chavan, Milind A; Smith, Jessica A; Williams, Kenneth H; Wilkins, Michael; Long, Philip; Lovley, Derek R

    2013-03-01

    Molecular tools that can provide an estimate of the in situ growth rate of Geobacter species could improve understanding of dissimilatory metal reduction in a diversity of environments. Whole-genome microarray analyses of a subsurface isolate of Geobacter uraniireducens, grown under a variety of conditions, identified a number of genes that are differentially expressed at different specific growth rates. Expression of two genes encoding ribosomal proteins, rpsC and rplL, was further evaluated with quantitative reverse transcription-PCR (qRT-PCR) in cells with doubling times ranging from 6.56 h to 89.28 h. Transcript abundance of rpsC correlated best (r(2) = 0.90) with specific growth rates. Therefore, expression patterns of rpsC were used to estimate specific growth rates of Geobacter species during an in situ uranium bioremediation field experiment in which acetate was added to the groundwater to promote dissimilatory metal reduction. Initially, increased availability of acetate in the groundwater resulted in higher expression of Geobacter rpsC, and the increase in the number of Geobacter cells estimated with fluorescent in situ hybridization compared well with specific growth rates estimated from levels of in situ rpsC expression. However, in later phases, cell number increases were substantially lower than predicted from rpsC transcript abundance. This change coincided with a bloom of protozoa and increased attachment of Geobacter species to solid phases. These results suggest that monitoring rpsC expression may better reflect the actual rate that Geobacter species are metabolizing and growing during in situ uranium bioremediation than changes in cell abundance.

  19. Growth rate analysis and efficient experimental design for tumor xenograft studies.

    Science.gov (United States)

    Hather, Gregory; Liu, Ray; Bandi, Syamala; Mettetal, Jerome; Manfredi, Mark; Shyu, Wen-Chyi; Donelan, Jill; Chakravarty, Arijit

    2014-01-01

    Human tumor xenograft studies are the primary means to evaluate the biological activity of anticancer agents in late-stage preclinical drug discovery. The variability in the growth rate of human tumors established in mice and the small sample sizes make rigorous statistical analysis critical. The most commonly used summary of antitumor activity for these studies is the T/C ratio. However, alternative methods based on growth rate modeling can be used. Here, we describe a summary metric called the rate-based T/C, derived by fitting each animal's tumor growth to a simple exponential model. The rate-based T/C uses all of the data, in contrast with the traditional T/C, which only uses a single measurement. We compare the rate-based T/C with the traditional T/C and assess their performance through a bootstrap analysis of 219 tumor xenograft studies. We find that the rate-based T/C requires fewer animals to achieve the same power as the traditional T/C. We also compare 14-day studies with 21-day studies and find that 14-day studies are more cost efficient. Finally, we perform a power analysis to determine an appropriate sample size.

  20. Growth rate of matter perturbations as a probe of large-scale magnetism

    CERN Document Server

    Giovannini, Massimo

    2011-01-01

    The growth rate of matter perturbations is computed in a magnetized environment for the LambdaCDM and wCDM paradigms. It is argued that the baryons do not necessarily follow into the dark matter potential wells after they are released from the drag of the photons. The baryonic evolution equations inherit a forcing term whose explicit form depends on the plasma description and can be deduced, for instance, in the resistive magnetohydrodynamical approximation. After deriving an analytical expression for the growth rate applicable when dark energy does not cluster, the effects of relativistic corrections and of the inhomogeneities associated with the other species of the plasma are taken into account numerically. The spectral amplitudes and slopes of the stochastic magnetic background are selected to avoid appreciable distortions in the measured temperature and polarization anisotropies of the Cosmic Microwave Background. The growth of structures in the current paradigms of structure formation represents a compl...

  1. Wavy membranes and the growth rate of a planar chemical garden: Enhanced diffusion and bioenergetics

    CERN Document Server

    Ding, Yang; Steinbock, Oliver; Cartwright, Julyan H E; Cardoso, Silvana S S

    2016-01-01

    In order to model ion transport across protocell membranes in Hadean hydrothermal vents, we consider both theoretically and experimentally the planar growth of a precipitate membrane formed at the interface between two parallel fluid streams in a two-dimensional microfluidic reactor. The growth rate of the precipitate is found to be proportional to the square root of time, which is characteristic of diffusive transport. However, the dependence of the growth rate on the concentrations of hydroxide and metal ions is approximately linear and quadratic, respectively. We show that such a difference in ionic transport dynamics arises from the enhanced transport of metal ions across a thin gel layer present at the surface of the precipitate. The fluctuations in transverse velocity in this wavy porous gel layer allow an enhanced transport of the cation, so that the effective diffusivity is about an order of magnitude higher than that expected from molecular diffusion alone. Our theoretical predictions are in excellen...

  2. Final Report: "Collaborative Project. Understanding the Chemical Processes That Affect Growth Rates of Freshly Nucleated Particles"

    Energy Technology Data Exchange (ETDEWEB)

    Smith, James N. [NCAR, Boulder, CO (United States); McMurry, Peter H. [NCAR, Boulder, CO (United States)

    2015-11-12

    This final technical report describes our research activities that have, as the ultimate goal, the development of a model that explains growth rates of freshly nucleated particles. The research activities, which combine field observations with laboratory experiments, explore the relationship between concentrations of gas-phase species that contribute to growth and the rates at which those species are taken up. We also describe measurements of the chemical composition of freshly nucleated particles in a variety of locales, as well as properties (especially hygroscopicity) that influence their effects on climate. Our measurements include a self-organized, DOE-ARM funded project at the Southern Great Plains site, the New Particle Formation Study (NPFS), which took place during spring 2013. NPFS data are available to the research community on the ARM data archive, providing a unique suite observations of trace gas and aerosols that are associated with the formation and growth of atmospheric aerosol particles.

  3. Radiocarbon-Based Ages and Growth Rates of Bamboo Corals from the Gulf of Alaska

    Energy Technology Data Exchange (ETDEWEB)

    Roark, E B; Guilderson, T P; Flood-Page, S; Dunbar, R B; Ingram, B L; Fallon, S J; McCulloch, M

    2004-12-12

    Deep-sea coral communities have long been recognized by fisherman as areas that support large populations of commercial fish. As a consequence, many deep-sea coral communities are threatened by bottom trawling. Successful management and conservation of this widespread deep-sea habitat requires knowledge of the age and growth rates of deep-sea corals. These organisms also contain important archives of intermediate and deep-water variability, and are thus of interest in the context of decadal to century-scale climate dynamics. Here, we present {Delta}{sup 14}C data that suggest that bamboo corals from the Gulf of Alaska are long-lived (75-126 years) and that they acquire skeletal carbon from two distinct sources. Independent verification of our growth rate estimates and coral ages is obtained by counting seasonal Sr/Ca cycles and probable lunar cycle growth bands.

  4. Rate-dependent morphology of Li2O2 growth in Li-O2 batteries

    CERN Document Server

    Horstmann, B; Mitchell, R; Bessler, W G; Shao-Horn, Y; Bazant, M Z

    2013-01-01

    Compact solid discharge products enable energy storage devices with high gravimetric and volumetric energy densities, but solid deposits on active surfaces can disturb charge transport and induce mechanical stress. In this Letter we develop a nanoscale continuum model for the growth of Li2O2 crystals in lithium-oxygen batteries with organic electrolytes, based on a theory of electrochemical non-equilibrium thermodynamics originally applied to Li-ion batteries. As in the case of lithium insertion in phase-separating LiFePO4 nanoparticles, the theory predicts a transition from complex to uniform morphologies of Li2O2 with increasing current. Discrete particle growth at low discharge rates becomes suppressed at high rates, resulting in a film of electronically insulating Li2O2 that limits cell performance. We predict that the transition between these surface growth modes occurs at current densities close to the exchange current density of the cathode reaction, consistent with experimental observations.

  5. Radiocarbon-Based Ages and Growth Rates of Bamboo Corals from the Gulf of Alaska

    Energy Technology Data Exchange (ETDEWEB)

    Roark, E B; Guilderson, T P; Flood-Page, S; Dunbar, R B; Ingram, B L; Fallon, S J; McCulloch, M

    2004-12-12

    Deep-sea coral communities have long been recognized by fisherman as areas that support large populations of commercial fish. As a consequence, many deep-sea coral communities are threatened by bottom trawling. Successful management and conservation of this widespread deep-sea habitat requires knowledge of the age and growth rates of deep-sea corals. These organisms also contain important archives of intermediate and deep-water variability, and are thus of interest in the context of decadal to century-scale climate dynamics. Here, we present {Delta}{sup 14}C data that suggest that bamboo corals from the Gulf of Alaska are long-lived (75-126 years) and that they acquire skeletal carbon from two distinct sources. Independent verification of our growth rate estimates and coral ages is obtained by counting seasonal Sr/Ca cycles and probable lunar cycle growth bands.

  6. Increased classical endoplasmic reticulum stress is sufficient to reduce chondrocyte proliferation rate in the growth plate and decrease bone growth.

    Directory of Open Access Journals (Sweden)

    Louise H W Kung

    Full Text Available Mutations in genes encoding cartilage oligomeric matrix protein and matrilin-3 cause a spectrum of chondrodysplasias called multiple epiphyseal dysplasia (MED and pseudoachondroplasia (PSACH. The majority of these diseases feature classical endoplasmic reticulum (ER stress and activation of the unfolded protein response (UPR as a result of misfolding of the mutant protein. However, the importance and the pathological contribution of ER stress in the disease pathogenesis are unknown. The aim of this study was to investigate the generic role of ER stress and the UPR in the pathogenesis of these diseases. A transgenic mouse line (ColIITgcog was generated using the collagen II promoter to drive expression of an ER stress-inducing protein (Tgcog in chondrocytes. The skeletal and histological phenotypes of these ColIITgcog mice were characterised. The expression and intracellular retention of Tgcog induced ER stress and activated the UPR as characterised by increased BiP expression, phosphorylation of eIF2α and spliced Xbp1. ColIITgcog mice exhibited decreased long bone growth and decreased chondrocyte proliferation rate. However, there was no disruption of chondrocyte morphology or growth plate architecture and perturbations in apoptosis were not apparent. Our data demonstrate that the targeted induction of ER stress in chondrocytes was sufficient to reduce the rate of bone growth, a key clinical feature associated with MED and PSACH, in the absence of any growth plate dysplasia. This study establishes that classical ER stress is a pathogenic factor that contributes to the disease mechanism of MED and PSACH. However, not all the pathological features of MED and PSACH were recapitulated, suggesting that a combination of intra- and extra-cellular factors are likely to be responsible for the disease pathology as a whole.

  7. Beyond reduced-impact logging: silvicultural treatments to increase growth rates of tropical trees

    NARCIS (Netherlands)

    Peña-Claros, M.; Fredericksen, T.S.; Alarcón, A.; Blate, G.M.; Choque, U.; Leaño, C.; Licona, J.C.; Mostacedo, B.; Pariona, W.; Villegas, Z.; Putz, F.E.

    2008-01-01

    Use of reduced-impact logging (RIL) techniques has repeatedly been shown to reduce damage caused by logging. Unfortunately, these techniques do not necessarily ameliorate the low growth rates of many commercial species or otherwise assure recovery of the initial volume harvested during the next cutt

  8. Automatic tuning and adaptation for specific growth rate control of fed-batch cultivation

    NARCIS (Netherlands)

    Soons, Z.I.T.A.; Straten, van G.; Boxtel, van A.J.B.

    2006-01-01

    To ensure consistency between fed-batch cultivations for the production of vaccines or other bio-pharmaceuticals it is desirable to control the specific growth rate to a pre-set constant value. This is a challenge because the dynamics of the process is considerably changing due to the increase in

  9. Quantitative physiology of Lactococcus lactis at extreme low-growth rates

    NARCIS (Netherlands)

    Ercan, O.; Smid, E.J.; Kleerebezem, M.

    2013-01-01

    This paper describes the metabolic adaptation of Lactococcus lactis during the transition from a growing to a non-growing state using retentostat cultivation. Under retentostat cultivation, the specific growth rate decreased from 0.025 h-1 to 0.0001 h-1 in 42 days, while doubling time increased to m

  10. Automatic Stand Modeling of Casting Rate Influence on Solid Phase Growth of Round Ingot inside Crystallizer

    Directory of Open Access Journals (Sweden)

    A. N. Chichko

    2006-01-01

    Full Text Available The method of calculation and results of computer dynamics modeling of solid ingot skin in a crystallizer are presented in the paper. The paper shows influence of ingot drawing rate on dynamics of solid ingot skin growth in the continuous casting machine at steel grades used at Republic Unitary Enterprise «Belarussian Metallurgical Works» (BMZ.

  11. Growth, exchange rates and trade in Brazil: a structuralist post-Keynesian approach

    Directory of Open Access Journals (Sweden)

    Nelson H. Barbosa Filho

    2004-01-01

    Full Text Available This paper presents a structuralist post-Keynesian analysis of trade adjustment in Brazil. Based on the concept of the balance-of-payments (BoP constraint on growth, the paper investigates the relationship between income growth and real-exchange-rate devaluation necessary to adjust trade to a foreign-exchange constraint. The main result is that, with price-inelastic and income-elastic imports and based on its trade structure in 2002, Brazil may have to compensate an additional 1% of income growth with approximately 7% of real-exchange-rate devaluation in order to keep its trade balance stable in relation to GDP in the near future. Moreover, the trade parameters of Brazil seem to be unfavorable to growth with stable trade, that is, even moderate rates of GDP expansion lead to a substantial increase of imports and, therefore, require an also substantial devaluation of the real exchange rate to avoid a deterioration of the trade balance.

  12. Capitalizing on the Dynamic Features of Excel to Consider Growth Rates and Limits

    Science.gov (United States)

    Taylor, Daniel; Moore-Russo, Deborah

    2012-01-01

    It is common for both algebra and calculus instructors to use power functions of various degrees as well as exponential functions to examine and compare rates of growth. This can be done on a chalkboard, with a graphing calculator, or with a spreadsheet. Instructors often are careful to connect the symbolic and graphical (and occasionally the…

  13. Prediction of Microbial Growth Rate versus Biomass Yield by a Metabolic Network with Kinetic Parameters

    NARCIS (Netherlands)

    Adadi, Roi; Volkmer, Benjamin; Milo, Ron; Heinemann, Matthias; Shlomi, Tomer

    2012-01-01

    Identifying the factors that determine microbial growth rate under various environmental and genetic conditions is a major challenge of systems biology. While current genome-scale metabolic modeling approaches enable us to successfully predict a variety of metabolic phenotypes, including maximal bio

  14. Growth and yield responses of broccoli cultivars to different rates of nitrogen at western Chitwan, Nepal

    DEFF Research Database (Denmark)

    Giri, Raj Kumar; Sharma, Moha Datta; Shakya, Santa Man

    2013-01-01

    A field experiment was conducted with the objective to determine the optimum rate of nitrogen (N) fertilizer for effective growth and yield of two varieties of broccoli in southern plain of Nepal. The experiment was laid out with two-factorial completely random block design (RCBD) comprising two ...

  15. Linking root traits to potential growth rate in six temperate tree species

    NARCIS (Netherlands)

    Comas, L.H.; Bouma, T.J.; Eissenstat, D.M.

    2002-01-01

    There is an extremely limited understanding of how plants of different potential growth rate vary in root traits, especially in woody species. We contrasted fine root morphology, physiology, and elemental construction between a fast- and a slow-growing species in each of three families: Aceraceae (m

  16. The effects of supplemental Sericea lespedeza pellets in lambs and kids. 1. Growth rate

    Science.gov (United States)

    Sericea lespedeza (SL; Lespedeza cuneata) has been used in recent years to aid in the control of gastrointestinal nematodes (GIN) in sheep and goats. Grazing or feeding dried SL leads to a reduction in egg production by GIN and reduces coccidiosis. Growth rates in lambs and kids when fed SL for mo...

  17. STRONG LAW OF LARGE NUMBERS AND GROWTH RATE FOR NOD SEQUENCES

    Institute of Scientific and Technical Information of China (English)

    MA Song-lin; WANG Xue-jun

    2015-01-01

    In the paper, we get the precise results of Hájek-Rényi type inequalities for the par-tial sums of negatively orthant dependent sequences, which improve the results of Theorem 3.1 and Corollary 3.2 in Kim (2006) and the strong law of large numbers and strong growth rate for negatively orthant dependent sequences.

  18. Growth, exchange rates and trade in Brazil: a structuralist post Keynesian approach

    Directory of Open Access Journals (Sweden)

    Nelson H. Barbosa Filho

    2009-06-01

    Full Text Available This paper presents a structuralist post-Keynesian analysis of trade adjustment in Brazil. Based on the concept of the balance-of-payments (BoP constraint on growth, the paper investigates the relationship between income growth and real-exchange-rate devaluation necessary to adjust trade to a foreign-exchange constraint. The main result is that, with price-inelastic and income-elastic imports and based on its trade structure in 2002, Brazil may have to compensate an additional 1% of income growth with approximately 7% of real-exchange-rate devaluation in order to keep its trade balance stable in relation to GDP in the near future. Moreover, the trade parameters of Brazil seem to be unfavorable to growth with stable trade, that is, even moderate rates of GDP expansion lead to a substantial increase of imports and, therefore, require an also substantial devaluation of the real exchange rate to avoid a deterioration of the trade balance.

  19. Prediction of Microbial Growth Rate versus Biomass Yield by a Metabolic Network with Kinetic Parameters

    NARCIS (Netherlands)

    Adadi, Roi; Volkmer, Benjamin; Milo, Ron; Heinemann, Matthias; Shlomi, Tomer

    Identifying the factors that determine microbial growth rate under various environmental and genetic conditions is a major challenge of systems biology. While current genome-scale metabolic modeling approaches enable us to successfully predict a variety of metabolic phenotypes, including maximal

  20. Growth rate and maturation of skeletal muscles over a size range of galliform birds

    NARCIS (Netherlands)

    Dietz, MW; Ricklefs, RE; Ricklefs, Robert E.

    1997-01-01

    The relationship between growth rate and development of function in leg and pectoral muscles was studied in four species of galliform birds ranging from 125 g to 18 kg and, for comparison, in an altricial species, the European starling (80 g). An index to neonatal maturity (muscle dry content propor