WorldWideScience

Sample records for deformation division technical

  1. Chemical Technology Division annual technical report 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-06-01

    The Chemical Technology (CMT) Division is a diverse technical organization with principal emphases in environmental management and development of advanced energy sources. The Division conducts research and development in three general areas: (1) development of advanced power sources for stationary and transportation applications and for consumer electronics, (2) management of high-level and low-level nuclear wastes and hazardous wastes, and (3) electrometallurgical treatment of spent nuclear fuel. The Division also performs basic research in catalytic chemistry involving molecular energy resources, mechanisms of ion transport in lithium battery electrolytes, and the chemistry of technology-relevant materials and electrified interfaces. In addition, the Division operates the Analytical Chemistry Laboratory, which conducts research in analytical chemistry and provides analytical services for programs at Argonne National Laboratory (ANL) and other organizations. Technical highlights of the Division`s activities during 1997 are presented.

  2. 1998 Chemical Technology Division Annual Technical Report.

    Energy Technology Data Exchange (ETDEWEB)

    Ackerman, J.P.; Einziger, R.E.; Gay, E.C.; Green, D.W.; Miller, J.F.

    1999-08-06

    The Chemical Technology (CMT) Division is a diverse technical organization with principal emphases in environmental management and development of advanced energy sources. The Division conducts research and development in three general areas: (1) development of advanced power sources for stationary and transportation applications and for consumer electronics, (2) management of high-level and low-level nuclear wastes and hazardous wastes, and (3) electrometallurgical treatment of spent nuclear fuel. The Division also performs basic research in catalytic chemistry involving molecular energy resources, mechanisms of ion transport in lithium battery electrolytes, and the chemistry of technology-relevant materials. In addition, the Division operates the Analytical Chemistry Laboratory, which conducts research in analytical chemistry and provides analytical services for programs at Argonne National Laboratory (ANL) and other organizations. Technical highlights of the Division's activities during 1998 are presented.

  3. Chemical Technology Division annual technical report, 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-06-01

    CMT is a diverse technical organization with principal emphases in environmental management and development of advanced energy sources. It conducts R&D in 3 general areas: development of advanced power sources for stationary and transportation applications and for consumer electronics, management of high-level and low-level nuclear wastes and hazardous wastes, and electrometallurgical treatment of spent nuclear fuel. The Division also performs basic research in catalytic chemistry involving molecular energy resources, mechanisms of ion transport in lithium battery electrolytes, materials chemistry of electrified interfaces and molecular sieves, and the theory of materials properties. It also operates the Analytical Chemistry Laboratory, which conducts research in analytical chemistry and provides analytical services for programs at ANL and other organizations. Technical highlights of the Division`s activities during 1996 are presented.

  4. Chemical Technology Division, Annual technical report, 1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    Highlights of the Chemical Technology (CMT) Division`s activities during 1991 are presented. In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including advanced batteries and fuel cells; (2) technology for fluidized-bed combustion and coal-fired magnetohydrodynamics; (3) methods for treatment of hazardous and mixed hazardous/radioactive waste; (4) the reaction of nuclear waste glass and spent fuel under conditions expected for an unsaturated repository; (5) processes for separating and recovering transuranic elements from nuclear waste streams; (6) recovery processes for discharged fuel and the uranium blanket in the Integral Fast Reactor (IFR); (7) processes for removal of actinides in spent fuel from commercial water-cooled nuclear reactors and burnup in IFRs; and (8) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also conducts basic research in catalytic chemistry associated with molecular energy resources; chemistry of superconducting oxides and other materials of interest with technological application; interfacial processes of importance to corrosion science, catalysis, and high-temperature superconductivity; and the geochemical processes involved in water-rock interactions occurring in active hydrothermal systems. In addition, the Analytical Chemistry Laboratory in CMT provides a broad range of analytical chemistry support services to the technical programs at Argonne National Laboratory (ANL).

  5. Chemical Technology Division annual technical report, 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-01

    Highlights of the Chemical Technology (CMT) Division`s activities during 1994 are presented. In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including advanced batteries and fuel cells; (2) technology for fluidized-bed combustion; (3) methods for treatment of hazardous waste and mixed hazardous/radioactive waste; (4) the reaction of nuclear waste glass and spent fuel under conditions expected for an unsaturated repository; (5) processes for separating and recovering transuranic elements from waste streams, concentrating radioactive waste streams with advanced evaporator technology, and producing {sup 99}Mo from low-enriched uranium for medical applications; (6) electrometallurgical treatment of the many different types of spent nuclear fuel in storage at Department of Energy sites; and (8) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also conducts basic research in catalytic chemistry associated with molecular energy resources and novel ceramic precursors; materials chemistry of superconducting oxides, electrified metal/solution interfaces, molecular sieve structures, and impurities in scrap copper and steel; and the geochemical processes involved in mineral/fluid interfaces and water-rock interactions occurring in active hydrothermal systems. In addition, the Analytical Chemistry Laboratory in CMT provides a broad range of analytical chemistry support services to the technical programs at Argonne National Laboratory (ANL).

  6. Chemical Technology Division annual technical report, 1986

    Energy Technology Data Exchange (ETDEWEB)

    1987-06-01

    Highlights of the Chemical Technology (CMT) Division's activities during 1986 are presented. In this period, CMT conducted research and development in areas that include the following: (1) high-performance batteries - mainly lithium-alloy/metal sulfide and sodium/sulfur; (2) aqueous batteries (lead-acid, nickel/iron, etc.); (3) advanced fuel cells with molten carbonate or solid oxide electrolytes; (4) coal utilization, including the heat and seed recovery technology for coal-fired magnetohydrodynamics plants, the technology for fluidized-bed combustion, and a novel concept for CO/sub 2/ recovery from fossil fuel combustion; (5) methods for recovery of energy from municipal waste; (6) methods for the electromagnetic continuous casting of steel sheet; (7) techniques for treatment of hazardous waste such as reactive metals and trichloroethylenes; (8) nuclear technology related to waste management, a process for separating and recovering transuranic elements from nuclear waste, and the recovery processes for discharged fuel and the uranium blanket in a sodium-cooled fast reactor; and (9) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also has a program in basic chemistry research in the areas of catalytic hydrogenation and catalytic oxidation; materials chemistry for associated and ordered solutions at high temperatures; interfacial processes of importance to corrosion science, surface science, and catalysis; the thermochemistry of zeolites and related silicates; and the geochemical processes responsible for trace-element migration within the earth's crust. The Division continued to be the major user of the technical support provided by the Analytical Chemistry Laboratory at ANL. 127 refs., 71 figs., 8 tabs.

  7. Chemical technology division: Annual technical report 1987

    Energy Technology Data Exchange (ETDEWEB)

    1988-05-01

    Highlights of the Chemical Technology (CMT) Division's activities during 1987 are presented. In this period, CMT conducted research and development in the following areas: (1) high-performance batteries--mainly lithium-alloy/metal sulfide and sodium/sulfur; (2) aqueous batteries (lead-acid, nickel/iron, etc.); (3) advanced fuel cells with molten carbonate or solid oxide electrolytes; (4) coal utilization, including the heat and seed recovery technology for coal-fired magnetohydrodynamics plants and the technology for fluidized-bed combustion; (5) methods for the electromagnetic continuous casting of steel sheet and for the purification of ferrous scrap; (6) methods for recovery of energy from municipal waste and techniques for treatment of hazardous organic waste; (7) nuclear technology related to a process for separating and recovering transuranic elements from nuclear waste, the recovery processes for discharged fuel and the uranium blanket in a sodium-cooled fast reactor, and waste management; and (8) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also has a program in basic chemistry research in the areas of fluid catalysis for converting small molecules to desired products; materials chemistry for liquids and vapors at high temperatures; interfacial processes of importance to corrosion science, high-temperature superconductivity, and catalysis; the thermochemistry of various minerals; and the geochemical processes responsible for trace-element migration within the earth's crust. The Division continued to be the major user of the technical support provided by the Analytical Chemistry Laboratory at ANL. 54 figs., 9 tabs.

  8. Chemical Technology Division, Annual technical report, 1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    Highlights of the Chemical Technology (CMT) Division's activities during 1991 are presented. In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including advanced batteries and fuel cells; (2) technology for fluidized-bed combustion and coal-fired magnetohydrodynamics; (3) methods for treatment of hazardous and mixed hazardous/radioactive waste; (4) the reaction of nuclear waste glass and spent fuel under conditions expected for an unsaturated repository; (5) processes for separating and recovering transuranic elements from nuclear waste streams; (6) recovery processes for discharged fuel and the uranium blanket in the Integral Fast Reactor (IFR); (7) processes for removal of actinides in spent fuel from commercial water-cooled nuclear reactors and burnup in IFRs; and (8) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also conducts basic research in catalytic chemistry associated with molecular energy resources; chemistry of superconducting oxides and other materials of interest with technological application; interfacial processes of importance to corrosion science, catalysis, and high-temperature superconductivity; and the geochemical processes involved in water-rock interactions occurring in active hydrothermal systems. In addition, the Analytical Chemistry Laboratory in CMT provides a broad range of analytical chemistry support services to the technical programs at Argonne National Laboratory (ANL).

  9. Chemical Technology Division annual technical report, 1992

    Energy Technology Data Exchange (ETDEWEB)

    Battles, J.E.; Myles, K.M.; Laidler, J.J.; Green, D.W.

    1993-06-01

    In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including advanced batteries and fuel cells; (2) technology for fluidized-bed combustion and coal-fired magnetohydrodynamics; (3) methods for treatment of hazardous waste, mixed hazardous/radioactive waste, and municipal solid waste; (4) the reaction of nuclear waste glass and spent fuel under conditions expected for an unsaturated repository; (5) processes for separating and recovering transuranic elements from nuclear waste streams, treating water contaminated with volatile organics, and concentrating radioactive waste streams; (6) recovery processes for discharged fuel and the uranium blanket in the Integral Fast Reactor (EFR); (7) processes for removal of actinides in spent fuel from commercial water-cooled nuclear reactors and burnup in IFRs; and (8) physical chemistry of selected materials (corium; Fe-U-Zr, tritium in LiAlO{sub 2} in environments simulating those of fission and fusion energy systems. The Division also conducts basic research in catalytic chemistry associated with molecular energy resources and novel` ceramic precursors; materials chemistry of superconducting oxides, electrified metal/solution interfaces, and molecular sieve structures; and the geochemical processes involved in water-rock interactions occurring in active hydrothermal systems. In addition, the Analytical Chemistry Laboratory in CMT provides a broad range of analytical chemistry support services to the technical programs at Argonne National Laboratory (ANL).

  10. Chemical Technology Division. Annual technical report, 1995

    Energy Technology Data Exchange (ETDEWEB)

    Laidler, J.J.; Myles, K.M.; Green, D.W.; McPheeters, C.C.

    1996-06-01

    Highlights of the Chemical Technology (CMT) Division`s activities during 1995 are presented. In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including advanced batteries and fuel cells; (2) methods for treatment of hazardous waste and mixed hazardous/radioactive waste; (3) the reaction of nuclear waste glass and spent fuel under conditions expected for an unsaturated repository; (4) processes for separating and recovering selected elements from waste streams, concentrating low-level radioactive waste streams with advanced evaporator technology, and producing {sup 99}Mo from low-enriched uranium; (5) electrometallurgical treatment of different types of spent nuclear fuel in storage at Department of Energy sites; and (6) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems.

  11. Information Technology Division Technical Paper Abstracts 1995,

    Science.gov (United States)

    2007-11-02

    Information Technology Division (ITD), one of the largest research and development collectives at the Naval Research Laboratory. The abstracts are organized into sections that represent the six branches with ITD: the Navy Center for Applied Research in Artificial Intelligence, Communications Systems, the Center for High Assurance Computer Systems, Transmission Technology, Advanced Information Technology , and the Center for Computational Science. Within each section, a list of branch papers published in 1993 and 1994 has also been included; abstracts

  12. Chemical Technology Division annual technical report 1989

    Energy Technology Data Exchange (ETDEWEB)

    1990-03-01

    Highlights of the Chemical Technology (CMT) Division's activities during 1989 are presented. In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including high-performance batteries (mainly lithium/iron sulfide and sodium/metal chloride), aqueous batteries (lead-acid and nickel/iron), and advanced fuel cells with molten carbonate and solid oxide electrolytes: (2) coal utilization, including the heat and seed recovery technology for coal-fired magnetohydrodynamics plants and the technology for fluidized-bed combustion; (3) methods for recovery of energy from municipal waste and techniques for treatment of hazardous organic waste; (4) nuclear technology related to a process for separating and recovering transuranic elements from nuclear waste and for producing {sup 99}Mo from low-enriched uranium targets, the recovery processes for discharged fuel and the uranium blanket in a sodium-cooled fast reactor (the Integral Fast Reactor), and waste management; and (5) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also has a program in basic chemistry research in the areas of fluid catalysis for converting small molecules to desired products; materials chemistry for superconducting oxides and associated and ordered solutions at high temperatures; interfacial processes of importance to corrosion science, high-temperature superconductivity, and catalysis; and the geochemical processes responsible for trace-element migration within the earth's crust. The Division continued to be administratively responsible for and the major user of the Analytical Chemistry Laboratory at Argonne National Laboratory (ANL).

  13. Chemical Technology Division annual technical report, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Battles, J.E.; Myles, K.M.; Laidler, J.J.; Green, D.W.

    1994-04-01

    Chemical Technology (CMT) Division this period, conducted research and development in the following areas: advanced batteries and fuel cells; fluidized-bed combustion and coal-fired magnetohydrodynamics; treatment of hazardous waste and mixed hazardous/radioactive waste; reaction of nuclear waste glass and spent fuel under conditions expected for an unsaturated repository; separating and recovering transuranic elements, concentrating radioactive waste streams with advanced evaporators, and producing {sup 99}Mo from low-enriched uranium; recovering actinide from IFR core and blanket fuel in removing fission products from recycled fuel, and disposing removal of actinides in spent fuel from commercial water-cooled nuclear reactors; and physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also conducts basic research in catalytic chemistry associated with molecular energy resources and novel ceramic precursors; materials chemistry of superconducting oxides, electrified metal/solution interfaces, molecular sieve structures, thin-film diamond surfaces, effluents from wood combustion, and molten silicates; and the geochemical processes involved in water-rock interactions. The Analytical Chemistry Laboratory in CMT also provides a broad range of analytical chemistry support.

  14. Environmental Research Division technical progress report: January 1986--October 1987

    Energy Technology Data Exchange (ETDEWEB)

    1988-07-01

    Technical process in the various research activities of Argonne National Laboratory's Environmental Research Division is reported for the period 1986-1987. Textual, graphic, and tabular information is used to briefly summarize (in separate chapters) the work of the Division's Atmospheric Physics, Environmental Effects Research, Fundamental Molecular Physics and Chemistry, and Organic Geochemistry and Environmental Instrumentation Programs. Information on professional qualifications, awards, and outstanding professional activities of staff members, as well as lists of publications, oral presentations, special events organized, and participants in educational programs, are provided in appendices at the end of each chapter. Individual projects under each division are processed separately for the data bases.

  15. Chemical Technology Division annual technical report, 1990

    Energy Technology Data Exchange (ETDEWEB)

    1991-05-01

    Highlights of the Chemical Technology (CMT) Division's activities during 1990 are presented. In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including advanced batteries and fuel cells; (2) technology for coal- fired magnetohydrodynamics and fluidized-bed combustion; (3) methods for recovery of energy from municipal waste and techniques for treatment of hazardous organic waste; (4) the reaction of nuclear waste glass and spent fuel under conditions expected for a high-level waste repository; (5) processes for separating and recovering transuranic elements from nuclear waste streams, concentrating plutonium solids in pyrochemical residues by aqueous biphase extraction, and treating natural and process waters contaminated by volatile organic compounds; (6) recovery processes for discharged fuel and the uranium blanket in the Integral Fast Reactor (IFR); (7) processes for removal of actinides in spent fuel from commercial water-cooled nuclear reactors and burnup in IFRs; and (8) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also has a program in basic chemistry research in the areas of fluid catalysis for converting small molecules to desired products; materials chemistry for superconducting oxides and associated and ordered solutions at high temperatures; interfacial processes of importance to corrosion science, high-temperature superconductivity, and catalysis; and the geochemical processes responsible for trace-element migration within the earth's crust. The Analytical Chemistry Laboratory in CMT provides a broad range of analytical chemistry support services to the scientific and engineering programs at Argonne National Laboratory (ANL). 66 refs., 69 figs., 6 tabs.

  16. Environmental Research Division technical progress report, January 1984-December 1985

    Energy Technology Data Exchange (ETDEWEB)

    1986-05-01

    Technical progress in the various research and assessment activities of Argonne National Laboratory's Environmental Research Division is reported for the period 1984 to 1985. Textual, graphic, and tabular information is used to briefly summarize (in separate chapters) the work of the Division's Atmospheric Physics, Environmental Effects Research, Environmental Impacts, Fundamental Molecular Physics and Chemistry, and Waste Management Programs. Information on professional qualifications, awards, and outstanding professional activities of staff members, as well as lists of publications, oral presentations, special events organized, and participants in educational programs, are provided in appendices at the end of each chapter.

  17. Division of Biological and Medical Research annual technical report 1982

    Energy Technology Data Exchange (ETDEWEB)

    Rosenthal, M.W. (ed.)

    1983-05-01

    This report summarizes research during 1982 in the Division of Biological and Medical Research, Argonne National Laboratory. Studies in Carcinogenesis address mechanisms of chemical and radiation carcinogenesis including the processes of tumor initiation and promotion. The studies employ rat liver and mouse skin models as well as human rodent cell culture systems. The use of liposomes for metal mobilization is also explored. Low Level Radiation studies include delineation of the hematopoietic and other responses of dogs to continuous low level gamma irradiation, comparison of lifetime effects in mice of low level neutron and gamma irradiation, and study of the genetic effects of high LET radiation. Molecular Biology research develops two-dimensional electrophoresis systems for diagnosis and detection of cancer and other diseases. Fundamental structural and biophysical investigations of immunoglobulins and other key proteins are included, as are studies of cell growth, and of molecular and cellular effects of solar uv light. Research in Toxicology uses cellular, physiological, whole animal, and chronobiological end points and chemical separations to elucidate mechanisms and evaluate hazards of coal conversion by-products, actinides, and toxic metals. The final sections cover support facilities, educational activities, seminars, staff talks, staff, and funding agencies.

  18. Regulation of cell division in higher plants. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    Jacobs, Thomas W.

    2000-02-29

    Research in the latter part of the grant period was divided into two parts: (1) expansion of the macromolecular tool kit for studying plant cell division; (2) experiments in which the roles played by plant cell cycle regulators were to be cast in the light of the emerging yeast and animal cell paradigm for molecular control of the mitotic cycle. The first objectives were accomplished to a very satisfactory degree. With regard to the second part of the project, we were driven to change our objectives for two reasons. First, the families of cell cycle control genes that we cloned encoded such closely related members that the prospects for success at raising distinguishing antisera against each were sufficiently dubious as to be impractical. Epitope tagging is not feasible in Pisum sativum, our experimental system, as this species is not realistically transformable. Therefore, differentiating the roles of diverse cyclins and cyclin-dependent kinases was problematic. Secondly, our procedure for generating mitotically synchronized pea root meristems for biochemical studies was far too labor intensive for the proposed experiments. We therefore shifted our objectives to identifying connections between the conserved proteins of the cell cycle engine and factors that interface it with plant physiology and development. In this, we have obtained some very exciting results.

  19. Division of Biological and Medical Research annual technical report, 1981

    Energy Technology Data Exchange (ETDEWEB)

    Rosenthal, M.W. (ed.)

    1982-06-01

    This report summarizes research during 1981 in the Division of Biological and Medical Research, Argonne National Laboratory. Studies in Low Level Radiation include comparison of lifetime effects in mice of low level neutron and gamma irradiation, delineation of the responses of dogs to continuous low level gamma irradiation, elucidation of mechanisms of radiation damage and repair in mammalian cells, and study of the genetic effects of high LET radiations. Carcinogenesis research addresses mechanisms of tumor initiation and promotion in rat liver, chemical carcinogenesis in cultured mammalian cells, and molecular and genetic mechanisms of chemical and ultraviolet mutagenesis in bacteria. Research in Toxicology uses a variety of cellular, whole animal, and chronobiological end points, chemical separations, and statistical models to evaluate the hazards and mechanisms of actions of metals, coal gasification by products, and other energy-related pollutants. Human Protein Index studies develop two-dimensional electrophoresis systems for diagnosis and detection of cancer and other disease. Biophysics research includes fundamental structural and biophysical investigations of immunoglobulins and key biological molecules using NMR, crystallographic, and x-ray and neutron small-angle scattering techniques. The final sections cover support facilities, educational activities, seminars, staff talks, staff, and funding agencies.

  20. 76 FR 13662 - Hewlett Packard Company, Enterprise Business Division, Technical Services America, Global Parts...

    Science.gov (United States)

    2011-03-14

    ... Parts Supply Chain Group, Including Leased Workers From QFlex, North America Logistics, and UPS, All... Services America, Global Parts Supply Chain Group, Including Leased Workers From QFlex, North America... Business Division, Technical Services America, Global Parts Supply Chain Group, including leased...

  1. Motivation influencing worker performance in a technical division of Telkom SA

    Directory of Open Access Journals (Sweden)

    T. F.J. Oosthuizen

    2001-12-01

    Full Text Available This paper investigates the overall motivational level of employees in a technical division of Telkom SA during change periods. Specific reasons for the established levels of motivation are identified. Based on the six motivator factors and ten hygiene factors as presented by Herzberg, it is the conclusion of this study that the solution to motivate employees are based on informed and positively motivated employees who participate continuously in the change process at all levels

  2. Technical-tactical differences among university level taekwondo competitors by gender and weight division

    Directory of Open Access Journals (Sweden)

    Cristina Menescardi

    2012-10-01

    Full Text Available Aim: The aim of this study was to evaluate the technical-tactical behavior of the competitors competing in the 2011 University Taekwondo Championship of Spain.Method: The sample consisted of 30 men and 31 women participating in 45 championship finals and semifinals combats. The variables analyzed were: the score, total number of actions, the type of tactical action, the height, the type of technic and kicking leg.Results/Conclusions: The Mann Whitney U test showed significant differences between men and women in total actions, circular techniques and warnings. The results also showed significant gender differences in circular actions in the flyweight and heavyweight categories, in the linear actions in bantamweight and total score in the lightweight category. Significant differences in total actions, attacking actions, actions to the trunk, performed techniques with right leg and circular techniques were also found in the middleweight division. The technical-tactical behavior of taekwondo competitors was found to differ between gender or gender and weight divisions. Women were found to perform more circular actions to the trunk with the right leg and total actions than men, who received more warnings than women. 

  3. Technical information dissemination plan for the US Department of Energy, ETS/Solar Divisions

    Energy Technology Data Exchange (ETDEWEB)

    Mourning, P; Glenn, B; Rubin, S A; Shoemaker, F F; Soto, R

    1979-01-01

    A plan for a technical information dissemination (TID) program for the US Department of Energy ETS/Division of Resource Management is presented. This plan's purpose is to build the most effective information transfer mechanisms possible to support the earliest appropriate commercialization of solar research and development (R and D) results in five technologies: photovoltaics, solar thermal power, biomass, ocean thermal energy conversion, and wind energy conversion. This will be accomplished by strengthening existing TID activities of DOE contractors through coordination, evaluation, and maximum use of ongoing information support services. During Year 1 of the plan, new information activities will be initiated where the leverage effect appears reasonably high in meeting the goals of the TID program. DOE in-house and contractor personnel will be involved in planning, evaluating, and implementing these technical information dissemination activities. Finally, the plan proposes to involve users of solar R and D results in external evaluation of technical information activities in each of the five solar technologies.

  4. Bibliography of the technical literature of the Materials Joining Group, Metals and Ceramics Division, 1951--June 1989

    Energy Technology Data Exchange (ETDEWEB)

    David, S.A.; Goodwin, G.M.; Gardner, K. (comps.)

    1989-10-01

    This document contains a listing of the written scientific information originating in the Materials Joining (formerly the Welding and Brazing Group), Metals and Ceramics Division, Oak Ridge National Laboratory during 1951 through June 1989. This registry of documents is as much as possible, in the order of issue date. A complete cross-referenced listing of the technical literature of the Metals and Ceramics Division is also available.

  5. AOAC INTERNATIONAL's Technical Division on Reference Materials (TDRM) Reference Materials Database.

    Science.gov (United States)

    Zink, Donna

    2016-09-01

    The Technical Division on Reference Materials (TDRM) of AOAC INTERNATIONAL recommends policy and criteria to facilitate the development and use of reference materials (RMs) in the validation, implementation, and routine use of AOAC INTERNATIONAL methods. To aid analysts in these areas, TDRM has developed a searchable online database to identify RMs suitable for use with AOAC Official Methods of Analysis(SM) (OMA). RMs can be queried by analyte, by analyte and matrix, or by the selection of an OMA, based on analytes and matrixes described within the scope of the selected method. Only essential information is included in the database, to maximize usefulness and minimize the effort required to keep information current. Additional information, such as measurement uncertainty and purchasing instructions, is available through a link to the producer's Web site, when that information is available online. Data sets are solicited on a voluntary basis from National Metrology Institutes and accredited producers. Consideration of ease-of-use and ease-of-operation is a guiding principle in this database, as is cost management.

  6. Workshop on Advancing Experimental Rock Deformation Research: Scientific and Technical Needs

    Energy Technology Data Exchange (ETDEWEB)

    Tullis, Terry E. [Brown Univ., Providence, RI (United States)

    2016-05-31

    A workshop for the experimental rock deformation community was held in Boston on August 16-19, 2012, following some similar but smaller preliminary meetings. It was sponsored primarily by the NSF, with additional support from the DOE, the SCEC, and in-kind support by the USGS. A white paper summarizing the active discussions at the workshop and the outcomes is available (https://brownbox.brown.edu/download.php?hash=0b854d11). Those attending included practitioners of experimental rock deformation, i.e., those who conduct laboratory experiments, as well as users of the data provided by practitioners, namely field geologists, seismologists, geodynamicists, earthquake modelers, and scientists from the oil and gas industry. A considerable fraction of those attending were early-career scientists. The discussion initially focused on identifying the most important unsolved scientific problems in all of the research areas represented by the users that experiments would help solve. This initial session was followed by wide-ranging discussions of the most critical problems faced by practitioners, particularly by early-career scientists. The discussion also focused on the need for designing and building the next generation of experimental rock deformation equipment required to meet the identified scientific challenges. The workshop participants concluded that creation of an experimental rock deformation community organization is needed to address many of the scientific, technical, and demographic problems faced by this community. A decision was made to hold an organizational meeting of this new organization in San Francisco on December 1-2, 2012, just prior to the Fall Meeting of the AGU. The community has decided to name this new organization “Deformation Experimentation at the Frontier Of Rock and Mineral research” or DEFORM. As of May 1, 2013, 64 institutions have asked to be members of DEFORM.

  7. Proceedings of the Annual Meeting (26th) Technical Documentation Division Held at San Antonio, Texas on 7-10 May 1984.

    Science.gov (United States)

    1984-05-10

    963-A PROCEEDINGS * TWENTY-SIXTH ANNUAL MEETING TECHNICAL DOCUMENTATION DIVISION C:) ~ 7-10 May196BE4 ’-X.MAR 15 5 t.EL Tropicano Hotel San Antonio...with the U.S. Navy for four years as a Lt. J.G. Mr. Knob joined the Engineering Data Mangement Section of the American Defense Preparedness Association...Preparedness Association Technical Documentation Division May 8-11, 1984 El Tropicano Hotel , San Antonio, Texas -S

  8. Bibliography of the technical literature of the Metals and Ceramics Division, 1970--1974

    Energy Technology Data Exchange (ETDEWEB)

    Hill, M.R. (comp.)

    1977-07-01

    A bibliography of the scientific information originating in the Metals and Ceramics Division of ORNL during the period 1970 through 1974 is presented. The master listing contains 925 references, for which both subject and author indexes are provided.

  9. 76 FR 10394 - Hewlett Packard Company, Enterprise Business Division, Technical Services America, Global Parts...

    Science.gov (United States)

    2011-02-24

    ... Parts Supply Chain Group, Including Leased Workers From Qflex, North America Logistics, and UPS... Services America, Global Parts Supply Chain Group, Including Leased Workers From Qflex, North America..., Technical Services America, Global Parts Supply Chain Group, including leased workers from QFlex,...

  10. Technical Site Information: Planning group of the Directorate and Conventional Construction Division

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-11-01

    This document presents the technical site information for the Superconducting Super Collider project. The Ellis County, Texas site was selected by the Department of Energy in 1989. After assembling the initial staff at temporary facilities in Dallas, the SSC Laboratory began site-specific design work. The resulting design for the SSC accelerators, experimental areas, and laboratory facilities were described in the Site-Specific Conceptual Design Report of July 1990. Since then, design specifications for the technical components and conventional facilities have been formulated. In fact, a very significant amount of surface and underground construction has been initiated and many buildings have been completed. Testing of prototypes for most technical components is advanced. The construction phase of the SSC project is approximately 20% complete. At this time, it is appropriate to capture the conventional design work which has taken place since 1990. This documents records regional and physical information used in site studies, summarizes the site studies for conventional facilities, and presents site layouts for buildings and utilities as they would have been at the end of the construction project. As such, this documents summarizes and complements the work of many groups in the SSC laboratory, the Texas National Research Laboratory Commission (TNRLC), and several subcontractors to the SSC project. The document contains extensive references to their work contained in other drafts and final reports. In particular, it borrows heavily from the Site Development Plan (released in draft form in January, 1992) which has, to date, guided aspects of site development.

  11. Technical study of visible light wavelength division multiplexing using polymer optical fiber

    Institute of Scientific and Technical Information of China (English)

    Yongsheng Zhang; Hui Ma; Tao Zhang; Zhuo Wang; Dong Wang; Rongsheng Zheng; Haipeng Yang; Hai Ming

    2005-01-01

    Visible light wavelength division multiplexing (VWDM) experiment was performed using polymer optical fiber (POF). Lights of two different wavelengths (650 and 530 nm) were sent to a single POF. Red light (650 nm) was used for 100-Mb/s full duplex IP data transmission and green light (530 nm) was used for voice signal transmission. Light sources are light-emitting diodes (LEDs). A POF coupler (splitter) and the prisms were employed as multiplexer and demultiplexer, respectively. The channel isolation and insert loss were measured, which are 20.5 and 17.65 dB for 650-nm channel respectively, and 19.16 and 20.55 dB for 530 nm one respectively.

  12. 75 FR 21353 - Intel Corporation, Fab 20 Division, Including On-Site Leased Workers From Volt Technical...

    Science.gov (United States)

    2010-04-23

    ... Employment and Training Administration Intel Corporation, Fab 20 Division, Including On-Site Leased Workers... for Worker Adjustment Assistance on March 10, 2010, applicable to workers of Intel Corporation, Fab 20... the Hillsboro, Oregon location of Intel Corporation, Fab 20 Division. The Department has...

  13. Report: Results of Technical Network Vulnerability Assessment: EPA’s National Health & Environment Effects Research Laboratory, Western Ecology Division

    Science.gov (United States)

    Report #11-P-0429, August 3, 2011. Vulnerability testing of EPA’s NHEERL Western Ecology Division network conducted in March 2011 identified Internet Protocol addresses with numerous high-risk and medium-risk vulnerabilities.

  14. Bibliography of the technical literature of the Materials Joining Group, Metals and Ceramics Division, 1951 through June 1987

    Energy Technology Data Exchange (ETDEWEB)

    David, S.A.; Goodwin, G.M.; Gardner, K. (comps.)

    1987-08-01

    This document contains a listing of the written scientific information originating in the Materials Joining Group (formerly the Welding and Brazing Group), Metals and Ceramics Division, Oak Ridge National Laboratory during 1951 through June 1987. It is a registry of about 400 documents as nearly as possible in the order in which they were issued.

  15. Technical Note: Deformable image registration on partially matched images for radiotherapy applications

    Science.gov (United States)

    Yang, Deshan; Goddu, S. Murty; Lu, Wei; Pechenaya, Olga L.; Wu, Yu; Deasy, Joseph O.; El Naqa, Issam; Low, Daniel A.

    2010-01-01

    In radiation therapy applications, deformable image registrations (DIRs) are often carried out between two images that only partially match. Image mismatching could present as superior-inferior coverage differences, field-of-view (FOV) cutoffs, or motion crossing the image boundaries. In this study, the authors propose a method to improve the existing DIR algorithms so that DIR can be carried out in such situations. The basic idea is to extend the image volumes and define the extension voxels (outside the FOV or outside the original image volume) as NaN (not-a-number) values that are transparent to all floating-point computations in the DIR algorithms. Registrations are then carried out with one additional rule that NaN voxels can match any voxels. In this way, the matched sections of the images are registered properly, and the mismatched sections of the images are registered to NaN voxels. This method makes it possible to perform DIR on partially matched images that otherwise are difficult to register. It may also improve DIR accuracy, especially near or in the mismatched image regions. PMID:20175475

  16. Technical Note: DIRART- A software suite for deformable image registration and adaptive radiotherapy research

    Energy Technology Data Exchange (ETDEWEB)

    Yang Deshan; Brame, Scott; El Naqa, Issam; Aditya, Apte; Wu Yu; Murty Goddu, S.; Mutic, Sasa; Deasy, Joseph O.; Low, Daniel A. [Department of Radiation Oncology, School of Medicine, Washington University in Saint Louis, Missouri 63110 (United States)

    2011-01-15

    Purpose: Recent years have witnessed tremendous progress in image guide radiotherapy technology and a growing interest in the possibilities for adapting treatment planning and delivery over the course of treatment. One obstacle faced by the research community has been the lack of a comprehensive open-source software toolkit dedicated for adaptive radiotherapy (ART). To address this need, the authors have developed a software suite called the Deformable Image Registration and Adaptive Radiotherapy Toolkit (DIRART). Methods: DIRART is an open-source toolkit developed in MATLAB. It is designed in an object-oriented style with focus on user-friendliness, features, and flexibility. It contains four classes of DIR algorithms, including the newer inverse consistency algorithms to provide consistent displacement vector field in both directions. It also contains common ART functions, an integrated graphical user interface, a variety of visualization and image-processing features, dose metric analysis functions, and interface routines. These interface routines make DIRART a powerful complement to the Computational Environment for Radiotherapy Research (CERR) and popular image-processing toolkits such as ITK. Results: DIRART provides a set of image processing/registration algorithms and postprocessing functions to facilitate the development and testing of DIR algorithms. It also offers a good amount of options for DIR results visualization, evaluation, and validation. Conclusions: By exchanging data with treatment planning systems via DICOM-RT files and CERR, and by bringing image registration algorithms closer to radiotherapy applications, DIRART is potentially a convenient and flexible platform that may facilitate ART and DIR research.

  17. Technical Note: Deformable image registration on partially matched images for radiotherapy applications

    Energy Technology Data Exchange (ETDEWEB)

    Yang Deshan; Goddu, S. Murty; Lu Wei; Pechenaya, Olga L.; Wu Yu; Deasy, Joseph O.; El Naqa, Issam; Low, Daniel A. [Department of Radiation Oncology, Washington University in Saint Louis, Missouri 63110 (United States)

    2010-01-15

    In radiation therapy applications, deformable image registrations (DIRs) are often carried out between two images that only partially match. Image mismatching could present as superior-inferior coverage differences, field-of-view (FOV) cutoffs, or motion crossing the image boundaries. In this study, the authors propose a method to improve the existing DIR algorithms so that DIR can be carried out in such situations. The basic idea is to extend the image volumes and define the extension voxels (outside the FOV or outside the original image volume) as NaN (not-a-number) values that are transparent to all floating-point computations in the DIR algorithms. Registrations are then carried out with one additional rule that NaN voxels can match any voxels. In this way, the matched sections of the images are registered properly, and the mismatched sections of the images are registered to NaN voxels. This method makes it possible to perform DIR on partially matched images that otherwise are difficult to register. It may also improve DIR accuracy, especially near or in the mismatched image regions.

  18. Unilateral posterior vertebral column resection for severe thoracolumbar kyphotic deformity caused by old compressive vertebrae fracture: a technical improvement.

    Science.gov (United States)

    Wang, Hui; Zhang, Di; Sun, Ya-Peng; Ma, Lei; Ding, Wen-Yuan; Shen, Yong; Zhang, Ying-Ze

    2015-01-01

    Severe thoracolumbar kyphotic deformity caused by old compressive vertebrae fracture remains a big challenge for spine surgeons. When symptoms related to significant deformities cannot be adequately managed conservatively, posterior vertebral column resection (PVCR) is required, but with long operating time and severe blood loss. We develop a UPVCR technique, which is done through a unilateral approach instead of a bilateral approach, vertebral body resection advancing to cross the midline in an abrasive way from an extreme oblique orientation enable the resection of most contralateral vertebral body. In the present study, the effects of UPVCR for severe thoracolumbar kyphotic deformity were investigated. We did find that satisfactory correction of sagittal deformity, functional improvement and pain relief can be achieved by UPVCR, and it has the advantage of shortening surgery time, reducing blood loss and incidence of nerve root impingement over PVCR.

  19. Divisão do trabalho e trabalho técnico nas escolas de sociedades ocidentais Work division and technical work in the Western schools

    Directory of Open Access Journals (Sweden)

    Louis LeVasseur

    2004-12-01

    Full Text Available Este artigo mostra como a divisão do trabalho nas escolas dos Estados Unidos, da França e de Quebec sofre o efeito do aumento dos efetivos de agentes técnicos, essencialmente caracterizados por uma formação pré-universitária e por um trabalho de auxílio aos profissionais docentes e não-docentes (psicólogos, psicoeducadores,1 trabalhadores sociais, orientadores pedagógicos. Os autores focalizam as categorias de emprego2 que oferecem serviços de acompanhamento aos alunos, mais ou menos vinculados à pedagogia ou à gestão do comportamento dos alunos, o que exclui as categorias de emprego que executam tarefas administrativas (secretariado ou manuais (zeladores, pessoal da manutenção dos prédios, motoristas de ônibus. Uma visão geral dos efetivos desses agentes escolares nos Estados Unidos, na França e em Quebec precede uma descrição sintética de suas respectivas funções. Em seguida, para melhor compreender a presença e o crescimento recente dessas categorias de emprego nos meios escolares, os autores propõem diversas pistas interpretativas ligadas a transformações que dizem respeito, cada uma a seu modo, à escola: a divisão do trabalho nas escolas, a desprofissionalização, o surgimento de um modelo comercial na educação, a massificação, a busca de novos modos de gestão dos comportamentos a-escolares baseados na empatia e a perda de legitimidade institucional (vinculada ao fato de nossas sociedades passarem de um modelo antigo de modernidade para um novo modelo de modernidade. Os autores frisam em particular o risco de ver esse pessoal técnico, que tem uma formação diferente da dos profissionais docentes e não-docentes, introduzir nas escolas um pluralismo normativo que leva a uma certa forma de instabilidade institucional.This paper explores the division of work in schools and colleges from the United States, France and Quebec, and shows the impact of the increase of technical agents mainly characterized by

  20. AREVA Technical Days (ATD) session 3: operations of the reactors and services division, technical and economic aspects; AREVA Technical Days (ATD) session 3: les activites du pole reacteurs et services, aspects techniques et economiques

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-07-01

    These technical days organized by the Areva Group aims to explain the group activities in a technological and economic point of view, to provide an outlook of worldwide energy trends and challenges and to present each of their businesses in a synthetic manner. This third session deals with the reactors technologies basics, the EPR and SWR 1000 issues and outlook, the nuclear systems of the future, the business opportunities and business models. (A.L.B.)

  1. Technical Note: Radiological properties of tissue surrogates used in a multimodality deformable pelvic phantom for MR-guided radiotherapy

    Energy Technology Data Exchange (ETDEWEB)

    Niebuhr, Nina I., E-mail: n.niebuhr@dkfz.de; Johnen, Wibke; Güldaglar, Timur; Runz, Armin; Echner, Gernot; Mann, Philipp; Möhler, Christian; Pfaffenberger, Asja; Greilich, Steffen [Division of Medical Physics in Radiation Oncology, German Cancer Research Center (DKFZ), Im Neuenheimer Feld 280, Heidelberg 69120, Germany and Heidelberg Institute for Radiation Oncology (HIRO), National Center for Radiation Research in Oncology, Im Neuenheimer Feld 280, Heidelberg 69120 (Germany); Jäkel, Oliver [Division of Medical Physics in Radiation Oncology, German Cancer Research Center (DKFZ), Im Neuenheimer Feld 280, Heidelberg 69120 (Germany); Heidelberg Institute for Radiation Oncology (HIRO), National Center for Radiation Research in Oncology, Im Neuenheimer Feld 280, Heidelberg 69120 (Germany); Department of Medical Physics, Heidelberg Ion-Beam Therapy Center (HIT), Im Neuenheimer Feld 450, Heidelberg 69120 (Germany)

    2016-02-15

    Purpose: Phantom surrogates were developed to allow multimodal [computed tomography (CT), magnetic resonance imaging (MRI), and teletherapy] and anthropomorphic tissue simulation as well as materials and methods to construct deformable organ shapes and anthropomorphic bone models. Methods: Agarose gels of variable concentrations and loadings were investigated to simulate various soft tissue types. Oils, fats, and Vaseline were investigated as surrogates for adipose tissue and bone marrow. Anthropomorphic shapes of bone and organs were realized using 3D-printing techniques based on segmentations of patient CT-scans. All materials were characterized in dual energy CT and MRI to adapt CT numbers, electron density, effective atomic number, as well as T1- and T2-relaxation times to patient and literature values. Results: Soft tissue simulation could be achieved with agarose gels in combination with a gadolinium-based contrast agent and NaF to simulate muscle, prostate, and tumor tissues. Vegetable oils were shown to be a good representation for adipose tissue in all modalities. Inner bone was realized using a mixture of Vaseline and K{sub 2}HPO{sub 4}, resulting in both a fatty bone marrow signal in MRI and inhomogeneous areas of low and high attenuation in CT. The high attenuation of outer bone was additionally adapted by applying gypsum bandages to the 3D-printed hollow bone case with values up to 1200 HU. Deformable hollow organs were manufactured using silicone. Signal loss in the MR images based on the conductivity of the gels needs to be further investigated. Conclusions: The presented surrogates and techniques allow the customized construction of multimodality, anthropomorphic, and deformable phantoms as exemplarily shown for a pelvic phantom, which is intended to study adaptive treatment scenarios in MR-guided radiation therapy.

  2. [The nasal valve area: structure, function, clinical aspects and treatment. Sulsenti's technic for correction of valve deformities].

    Science.gov (United States)

    Sulsenti, G; Palma, P

    1989-01-01

    The nasal valve and nasal valve area are two entities which should not be confused. The nasal valve area is the narrowest portion of the nasal passage. It is bounded: medially by the septum; superiorly and laterally by the caudal margin of the upper lateral cartilage and its fibro-adipose attachment to the pyriform aperture ('empty triangle'); inferiorly by the floor of the pyriform aperture. The nasal valve, on the other hand, is the specific slit-like segment between the caudal margin of the upper lateral cartilage and the septum. From a physiological and surgical point of view, this distinction is fundamental. The nasal valve area is the site of the highest nasal resistance. Therefore, small deformities of the valve area may severely impair the dynamics of nasal air flow. Rhinomanometry and nasal endoscopy permit the best definition of valve pathophysiology. After having discussed the various surgical techniques reported in the literature, the authors present an original technique for the surgical correction of valvular deformities. It is completely performed through Cottle's hemitransfixion incision. The technique has several advantages: a) performance of only one incision, sufficient to visualize the entire nasal valve and cartilaginous vault, thus minimizing the risk of scar tissue formation; b) through the space thus created it is possible not only to correct the entire septum, but also to inspect and easily reach the structures constituting the nasal valve area; c) it is possible to use various types of grafts to support or reconstruct the valve area; d) it is possible to reach the key area as well as to do lateral osteotomies: all variations in shape and position of the nasal pyramid may be performed in order to normalize direction and pressures of nasal air flow: e) through the retrograde undermining of the lower lateral cartilages the resistance of the cul-de-sacs may be optimally adjusted; f) it is possible to change the shape, size and position of the

  3. Mechanical Engineering Department technical abstracts

    Energy Technology Data Exchange (ETDEWEB)

    1984-07-01

    The Mechanical Engineering Department publishes abstracts twice a year to inform readers of the broad range of technical activities in the Department, and to promote an exchange of ideas. Details of the work covered by an abstract may be obtained by contacting the author(s). General information about the current role and activities of each of the Department's seven divisions precedes the technical abstracts. Further information about a division's work may be obtained from the division leader, whose name is given at the end of each divisional summary. The Department's seven divisions are as follows: Nuclear Test Engineering Division, Nuclear Explosives Engineering Division, Weapons Engineering Division, Energy Systems Engineering Division, Engineering Sciences Division, Magnetic Fusion Engineering Division and Materials Fabrication Division.

  4. AREVA Technical Days (ATD) session 4: operations of the front-end division of the nuclear fuel cycle; AREVA Technical Days (ATD) session 4: les activites du pole Amont

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    These technical days organized by the Areva Group aims to explain the group activities in a technological and economic point of view, to provide an outlook of worldwide energy trends and challenges and to present each of their businesses in a synthetic manner. This fourth session deals with the strategic and financial significance of the Areva mining operations, the Areva chemistry business, the Areva enrichment business and the Areva fuel business. (A.L.B.)

  5. Fighting Divisions

    Science.gov (United States)

    1945-12-01

    when it hit the beaches of Morotai to open the drive that later led to the liberation of the Philippines, its Doughboys were alternately whistling...the Dixie Division sailed from Maffin Bay for the reconquest of Morotai , and on the 15th of the month hit the beaches of this Dutch island, less than...quickly secured a beachhead and by noon of D-day had seized Pitoe Airdrome. Morotai gave our forces control of the Halma- hera Sea and cut off 20,000

  6. Mechanical engineering department technical review

    Energy Technology Data Exchange (ETDEWEB)

    Carr, R.B. Denney, R.M. (eds.)

    1981-01-01

    The Mechanical Engineering Department Technical Review is published to: (1) inform the readers of various technical activities within the department, (2) promote exchange of ideas, and (3) give credit to the personnel who are achieving the results. The report is formatted into two parts: technical acievements and publication abstracts. The first is divided into eight sections, one for each division in the department providing the reader with the names of the personnel and the division accomplishing the work.

  7. Mechanical Engineering Department. Technical review

    Energy Technology Data Exchange (ETDEWEB)

    Simecka, W.B.; Condouris, R.A.; Talaber, C. (eds.)

    1980-01-01

    The Mechanical Engineering Department Technical Review is published to (1) inform the readers of various technical activities within the Department, (2) promote exchange of ideas, and (3) give credit to the personnel who are achieving the results. The report is formatted into two parts: technical achievements and publication abstracts. The first is divided into eight sections, one for each Division in the Department providing the reader with the names of the personnel and the Division accomplishing the work.

  8. 70th anniversary of the E K Zavoisky Kazan Physical-Technical Institute, Kazan Scientific Center of the Russian Academy of Sciences (Scientific session of the Physical Sciences Division of the Russian Academy of Sciences, 4 February 2016)

    Science.gov (United States)

    2016-06-01

    A scientific session of the Physical Sciences Division of the Russian Academy of Sciences (RAS) was held on 4 February 2016 at the E K Zavoisky Kazan Physical-Technical Institute, Kazan Scientific Center (KSC), RAS, devoted to the 70th anniversary of the E K Zavoisky Kazan Physical-Technical Institute, KSC RAS. The agenda posted on the website of the Physical Sciences Division RAS http://www.gpad.ac.ru comprised the following reports: (1) Demishev S V (Prokhorov General Physics Institute, RAS, Moscow) "Quantum phase transitions in spiral magnets without an inversion center"; (2) Smirnov A I (Kapitza Institute for Physical Problems, RAS, Moscow) "Magnetic resonance of spinons in quantum magnets"; (3) Ryazanov V V (Institute of Solid State Physics, RAS, Chernogolovka, Moscow region) "Coherent and nonequilibrium phenomena in superconductor- and ferromagnet-based structures"; (4) Mel'nikov A S (Institute for Physics of Microstructures, RAS, Nizhny Novgorod) "Mechanisms of long-range proximity effects in superconducting spintronics"; (5) Fel'dman E B (Institute of Problems of Chemical Physics, RAS, Chernogolovka, Moscow region) "Magnus expansion paradoxes in the study of equilibrium magnetization and entanglement in multi-pulse spin locking"; (6) Fraerman A A (Institute for Physics of Microstructures, RAS, Nizhny Novgorod) "Features of the motion of spin-1/2 particles in a noncoplanar magnetic field"; (7) Salikhov K M (E K Zavoisky Kazan Physical-Technical Institute, KSC, RAS, Kazan) "Electron paramagnetic resonance applications: promising developments at the E K Zavoisky Kazan Physical-Technical Institute of the Russian Academy of Sciences"; (8) Vinogradov E A (Institute for Spectroscopy, RAS, Troitsk, Moscow) "Ultrathin film characterization using far-field surface polariton spectroscopy"; (9) Glyavin M Yu (Institute of Applied Physics, RAS, Nizhny Novgorod) "High-power terahertz sources for spectroscopy and material diagnostics"; (10) Soltamov V A (Ioffe Institute

  9. PERSONNEL DIVISION BECOMES HUMAN RESOURCES DIVISION

    CERN Document Server

    Division des ressources humaines

    2000-01-01

    In the years to come, CERN faces big challenges in the planning and use of human resources. At this moment, Personnel (PE) Division is being reorganised to prepare for new tasks and priorities. In order to accentuate the purposes of the operation, the name of the division has been changed into Human Resources (HR) Division, with effect from 1st January 2000. Human Resources DivisionTel.73222

  10. Multiple-hook fixation in revision spinal deformity surgery for patients with a previous multilevel fusion mass: technical note and preliminary outcomes.

    Science.gov (United States)

    Liu, Ning; Wood, Kirkham B

    2017-03-01

    OBJECTIVE A previous multilevel fusion mass encountered during revision spinal deformity surgery may obscure anatomical landmarks, making instrumentation unworkable or incurring substantial blood loss and operative time. This study introduced a surgical technique of multiple-hook fixation for fixating previous multilevel fusion masses in revision spinal deformity surgeries and then evaluated its outcomes. METHODS Patients with a previous multilevel fusion mass who underwent revision corrective surgery down to the lumbosacral junction were retrospectively studied. Multiple hooks were used to fixate the fusion mass and linked to distal pedicle screws in the lumbosacral-pelvic complex. Radiological and clinical outcomes were evaluated. RESULTS The charts of 8 consecutive patients with spinal deformity were retrospectively reviewed (7 women, 1 man; mean age 56 years). The primary diagnoses included flat-back deformity (6 cases), thoracolumbar kyphoscoliosis (1 case), and lumbar spondylosis secondary to a previous scoliosis fusion (1 case). The mean follow-up duration was 30.1 months. Operations were performed at T3/4-ilium (4 cases), T7-ilium (1 case), T6-S1 (1 case), T12-S1 (1 case), and T9-L5 (1 case). Of 8 patients, 7 had sagittal imbalance preoperatively, and their mean C-7 plumb line improved from 10.8 ± 2.9 cm preoperatively to 5.3 ± 3.6 cm at final follow-up (p = 0.003). The mean lumbar lordosis of these patients at final follow-up was significantly greater than that preoperatively (35.2° ± 12.6° vs 16.8° ± 11.8°, respectively; p = 0.005). Two perioperative complications included osteotomy-related leg weakness in 1 patient and a stitch abscess in another. CONCLUSIONS The multiple-hook technique provides a viable alternative option for fixating a previous multilevel fusion mass in revision spinal deformity surgery.

  11. Computer Programs for Prediction of Mining Area Deformation with Time Factor Taken into Consideration

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    This paper discussed the current of works on computerisation of all problems related to mining subsidence, including the time factor,carried out in the Division of Mining Geodesy of Technical University of Silesia, Poland. First, the formulas implemented in the programs were presented. These formulas considerably increase the description accuracy of final deformations by taking into uncaved strip along extraction rib (extraction margin). They also improve the deformation description of areas located far from the extraction place. Then, the research results aiming to improving the description of deformation with time were introduced. Finally, the Windows-based version of the program for the creation of mining-geological opinions were presented in the form accepted by Mining Offices of Poland.

  12. Information Technology Division Technical Paper Abstracts

    Science.gov (United States)

    1993-06-11

    decisions under dependent evidences. 15 NATURAL LANGUAGE Title: Eucalyptus : An Integrated Spoken Language/Graphical Interface for Human- Computer Dialog...AIC-92-012 Eucalyptus : An Integrated Spoken Language/Graphical interface for Human-Computer Dialog, Kenneth Wauchope S] MAlr-92-013 Inductive Biases...algorithm which is an extension of the 2400- b/s LPC. In essence , the 800-b/s voice algorithm is a 2400-b/s LPC with modified parameter quantifiers with

  13. Technical Support | Division of Cancer Prevention

    Science.gov (United States)

    To view the live webinar, you will need to have the software, Microsoft Live Meeting, downloaded onto your computer before the event. In most cases, the software will automatically download when you open the program on your system. However, in the event that you need to download it manually, you can access the software at the link below: Download the Microsoft Office Live Meeting 2007 client  |

  14. Nuclear Chemistry Division annual report FY83

    Energy Technology Data Exchange (ETDEWEB)

    Struble, G. (ed.)

    1983-01-01

    The purpose of the annual reports of the Nuclear Chemistry Division is to provide a timely summary of research activities pursued by members of the Division during the preceding year. Throughout, details are kept to a minimum; readers desiring additional information are encouraged to read the referenced documents or contact the authors. The Introduction presents an overview of the Division's scientific and technical programs. Next is a section of short articles describing recent upgrades of the Division's major facilities, followed by sections highlighting scientific and technical advances. These are grouped under the following sections: nuclear explosives diagnostics; geochemistry and environmental sciences; safeguards technology and radiation effect; and supporting fundamental science. A brief overview introduces each section. Reports on research supported by a particular program are generally grouped together in the same section. The last section lists the scientific, administrative, and technical staff in the Division, along with visitors, consultants, and postdoctoral fellows. It also contains a list of recent publications and presentations. Some contributions to the annual report are classified and only their abstracts are included in this unclassified portion of the report (UCAR-10062-83/1); the full article appears in the classified portion (UCAR-10062-83/2).

  15. Bendix Kansas City Division technological spinoff through 1978

    Energy Technology Data Exchange (ETDEWEB)

    Barnes, H.T.

    1979-02-01

    The results of work of Bendix Kansas City Division are made available in the form of technical reports that are processed through the DOE Technical Information Center in Oak Ridge. The present report lists the documents released by the Division, along with author and subject indexes. Drawing sets released are also listed. Locations of report collections in the U.S., other countries, and international agencies are provided. (RWR)

  16. Computational Fair Division

    DEFF Research Database (Denmark)

    Branzei, Simina

    Fair division is a fundamental problem in economic theory and one of the oldest questions faced through the history of human society. The high level scenario is that of several participants having to divide a collection of resources such that everyone is satisfied with their allocation -- e.g. two...... heirs dividing a car, house, and piece of land inherited. The literature on fair division was developed in the 20th century in mathematics and economics, but computational work on fair division is still sparse. This thesis can be seen as an excursion in computational fair division divided in two parts...... study alternative and richer models, such as externalities in cake cutting, simultaneous cake cutting, and envy-free cake cutting. The second part of the thesis tackles the fair allocation of multiple goods, divisible and indivisible. In the realm of divisible goods, we investigate the well known...

  17. Mechanical Engineering Department Technical Review

    Energy Technology Data Exchange (ETDEWEB)

    Carr, R.B.; Denney, R.M. (eds.)

    1981-07-01

    The Mechanical Engineering Department Technical Review is published to inform readers of various technical activities within the Department, promote exchange of ideas, and give credit to personnel who are achieving the results. The report is presented in two parts: technical achievements and publication abstracts. The first is divided into seven sections, each of which reports on an engineering division and its specific activities related to nuclear tests, nuclear explosives, weapons, energy systems, engineering sciences, magnetic fusion, and materials fabrication.

  18. Mechanical Engineering Department technical abstracts

    Energy Technology Data Exchange (ETDEWEB)

    Denney, R.M. (ed.)

    1982-07-01

    The Mechanical Engineering Department publishes listings of technical abstracts twice a year to inform readers of the broad range of technical activities in the Department, and to promote an exchange of ideas. Details of the work covered by an abstract may be obtained by contacting the author(s). Overall information about current activities of each of the Department's seven divisions precedes the technical abstracts.

  19. Contracture deformity

    Science.gov (United States)

    Deformity - contracture ... Contracture can be caused by any of the following: Brain and nervous system disorders, such as cerebral ... Follow your health care provider's instructions for treating contracture at home. Treatments may include: Doing exercises and ...

  20. Life Sciences Division annual report, 1988

    Energy Technology Data Exchange (ETDEWEB)

    Marrone, B.L.; Cram, L.S. (comps.)

    1989-04-01

    This report summarizes the research and development activities of Los Alamos National Laboratory's Life Sciences Division for the calendar year 1988. Technical reports related to the current status of projects are presented in sufficient detail to permit the informed reader to assess their scope and significance. Summaries useful to the casual reader desiring general information have been prepared by the Group Leaders and appear in each group overview. Investigators on the staff of the Life Sciences Division will be pleased to provide further information.

  1. Equipment, Organization and Command and Control Relationships of Intelligence and Electronic Warfare Support to the Heavy Division,

    Science.gov (United States)

    1987-01-05

    standard tactical mission given to the ESM and ECM as- sets of the division, the MI battalion Technical Control and Analysis Element ( TCAE ) performs all...and ESM assets within the division and assets that are supporting the division. Doctrinally the TCAE orchestrates the IEW system at division level by...totally dependent on the mission management and technical control exercised by the TCAE . It is this centralized management which most drives the

  2. Division: The Sleeping Dragon

    Science.gov (United States)

    Watson, Anne

    2012-01-01

    Of the four mathematical operators, division seems to not sit easily for many learners. Division is often described as "the odd one out". Pupils develop coping strategies that enable them to "get away with it". So, problems, misunderstandings, and misconceptions go unresolved perhaps for a lifetime. Why is this? Is it a case of "out of sight out…

  3. Division: The Sleeping Dragon

    Science.gov (United States)

    Watson, Anne

    2012-01-01

    Of the four mathematical operators, division seems to not sit easily for many learners. Division is often described as "the odd one out". Pupils develop coping strategies that enable them to "get away with it". So, problems, misunderstandings, and misconceptions go unresolved perhaps for a lifetime. Why is this? Is it a case of "out of sight out…

  4. Arithmetic of Division Fields

    CERN Document Server

    Brumer, Armand

    2011-01-01

    We study the arithmetic of division fields of semistable abelian varieties A over the rationals. The Galois group of the 2-division field of A is analyzed when the conductor is odd and squarefree. The irreducible semistable mod 2 representations of small conductor are determined under GRH. These results are used in "Paramodular abelian varieties of odd conductor," arXiv:1004.4699.

  5. On infinitely divisible semimartingales

    DEFF Research Database (Denmark)

    Basse-O'Connor, Andreas; Rosiński, Jan

    2015-01-01

    are strictly representable due to Hida's multiplicity theorem, the classical Stricker's theorem follows from our result. Another consequence is that the question when an infinitely divisible process is a semimartingale can often be reduced to a path property, when a certain associated infinitely divisible...

  6. Deformation microstructures

    DEFF Research Database (Denmark)

    Hansen, N.; Huang, X.; Hughes, D.A.

    2004-01-01

    Microstructural characterization and modeling has shown that a variety of metals deformed by different thermomechanical processes follows a general path of grain subdivision, by dislocation boundaries and high angle boundaries. This subdivision has been observed to very small structural scales...... of the order of 10 nm, produced by deformation under large sliding loads. Limits to the evolution of microstructural parameters during monotonic loading have been investigated based on a characterization by transmission electron microscopy. Such limits have been observed at an equivalent strain of about 10...

  7. Divisible ℤ-modules

    Directory of Open Access Journals (Sweden)

    Futa Yuichi

    2016-03-01

    Full Text Available In this article, we formalize the definition of divisible ℤ-module and its properties in the Mizar system [3]. We formally prove that any non-trivial divisible ℤ-modules are not finitely-generated.We introduce a divisible ℤ-module, equivalent to a vector space of a torsion-free ℤ-module with a coefficient ring ℚ. ℤ-modules are important for lattice problems, LLL (Lenstra, Lenstra and Lovász base reduction algorithm [15], cryptographic systems with lattices [16] and coding theory [8].

  8. Haglund's Deformity

    Science.gov (United States)

    ... to follow the surgeon’s instructions for postsurgical care. Prevention To help prevent a recurrence of Haglund’s deformity: wear appropriate shoes; avoid shoes with a rigid heel back use arch supports or orthotic devices perform stretching exercises to prevent the Achilles tendon from tightening ...

  9. Underwater Sound Reference Division

    Data.gov (United States)

    Federal Laboratory Consortium — The Underwater Sound Reference Division (USRD) serves as the U.S. standardizing activity in the area of underwater acoustic measurements, as the National Institute...

  10. Underwater Sound Reference Division

    Data.gov (United States)

    Federal Laboratory Consortium — The Underwater Sound Reference Division (USRD) serves as the U.S. standardizing activity in the area of underwater acoustic measurements, as the National Institute...

  11. On Geometric Infinite Divisibility

    OpenAIRE

    Sandhya, E.; Pillai, R. N.

    2014-01-01

    The notion of geometric version of an infinitely divisible law is introduced. Concepts parallel to attraction and partial attraction are developed and studied in the setup of geometric summing of random variables.

  12. Algebres non associatives normees de division. Classification des algebres reelles de Jordan non commutatives de division lineaire de dimension 8

    CERN Document Server

    Rochdi, Abdellatif

    2010-01-01

    In this work we are interested in the general problem of the determination of the normed division algebras. Our fundamental results are obtained in the particular subclass of those 8-dimensional quadratic flexible real division algebras. We give a new process which generalizes that of Cayley-Dickson and which allows the obtaining of a new family of eight-dimensional quadratic flexible real division algebras. We give examples of 8-dimensional quadratic flexible real division algebras which cannot be obtained by this first process of duplication and by means of a second process, which consists in making an appropriate deformation of the product of the octonion algebra, we determine these last ones and we resolve the isomorphism problem. Among the eight-dimensional quadratic flexible real division algebras, we study those which possess a nontrivial derivation by mean of the generalized Cayley-Dickson process. We also give examples where the group of automorphisms is trivial, and characterize the algebras whose g...

  13. Transportation Technical Environmental Information Center index

    Energy Technology Data Exchange (ETDEWEB)

    Davidson, C.A.; Foley, J.T.

    1979-01-01

    In an effort to determine the environmental intensities to which energy materials in transit may be exposed, a ''Data Center'' of technical environmental information has been established by Sandia Laboratories, Division 5522, for the DOE Division of Environmental Control Technology. An index is presented which can be used to request data of interest.

  14. Reasonable partiality in professional ethics: the moral division of labour.

    Science.gov (United States)

    Jacobs, Frans

    2005-04-01

    Attention is given to a background idea that is often invoked in discussions about reasonable partiality: the idea of a moral division of labour. It is not only a right, but also a duty for professionals to attend (almost) exclusively to the interests of their own clients, because their partial activities are part of an impartial scheme providing for an allocation of professional help to all clients. To clarify that idea, a difference is made between two kinds of division of labour, a technical one and a social one. In order to assess the applicability of the idea of a moral division of labour to professional ethics, journalism is contrasted with other professions.

  15. Sperner's lemma and fair division

    OpenAIRE

    DAKSKOBLER, LARISA

    2016-01-01

    Fair division is an active research area in Mathematics, Economics, Computer Science, etc. There are many different kinds of fair division problems. These are often named after everyday situations: fair resource allocation, fair cake-cutting, fair chore division, room assignment – rent division, and more. Although many exact and approximative methods for finding fair solutions already exist, the area of fair division still expands and tries to find better solutions for everyday problems. The...

  16. Division algebras and supersymmetry

    CERN Document Server

    Baez, John C

    2009-01-01

    Supersymmetry is deeply related to division algebras. Nonabelian Yang--Mills fields minimally coupled to massless spinors are supersymmetric if and only if the dimension of spacetime is 3, 4, 6 or 10. The same is true for the Green--Schwarz superstring. In both cases, supersymmetry relies on the vanishing of a certain trilinear expression involving a spinor field. The reason for this, in turn, is the existence of normed division algebras in dimensions 1, 2, 4 and 8: the real numbers, complex numbers, quaternions and octonions. Here we provide a self-contained account of how this works.

  17. Power Dissipation in Division

    DEFF Research Database (Denmark)

    Liu, Wei; Nannarelli, Alberto

    2008-01-01

    A few classes of algorithms to implement division in hardware have been used over the years: division by digit-recurrence, by reciprocal approximation by iterative methods and by polynomial approximation. Due to the differences in the algorithms, a comparison among their implementation in terms...... of performance and precision is sometimes hard to make. In this work, we use power dissipation and energy consumption as metrics to compare among those different classes of algorithms. There are no previous works in the literature presenting such a comparison....

  18. | Division of Cancer Prevention

    Science.gov (United States)

    The Division of Cancer Prevention (DCP) conducts and supports research to determine a person's risk of cancer and to find ways to reduce the risk. This knowledge is critical to making progress against cancer because risk varies over the lifespan as genetic and epigenetic changes can transform healthy tissue into invasive cancer.

  19. On infinitely divisible semimartingales

    DEFF Research Database (Denmark)

    Basse-O'Connor, Andreas; Rosiński, Jan

    2015-01-01

    processes, including linear fractional processes, mixed moving averages, and supOU processes, as particular cases. The proof of the main theorem relies on series representations of jumps of cadlag infinitely divisible processes given in Basse-O'Connor and Rosinski [2013, Ann. Probab. 41(6)] combined...

  20. Solid State Division

    Energy Technology Data Exchange (ETDEWEB)

    Green, P.H.; Watson, D.M. (eds.)

    1989-08-01

    This report contains brief discussions on work done in the Solid State Division of Oak Ridge National Laboratory. The topics covered are: Theoretical Solid State Physics; Neutron scattering; Physical properties of materials; The synthesis and characterization of materials; Ion beam and laser processing; and Structure of solids and surfaces. (LSP)

  1. Encrypted integer division

    NARCIS (Netherlands)

    Veugen, P.J.M.

    2010-01-01

    When processing signals in the encrypted domain, homomorphic encryption can be used to enable linear operations on encrypted data. Integer division of encrypted data however requires an additional protocol with the server and will be relatively expensive. We present new solutions for dividing encryp

  2. The Problem with Division

    Science.gov (United States)

    Pope, Sue

    2012-01-01

    Of the "big four", division is likely to regarded by many learners as "the odd one out", "the difficult one", "the one that is complicated", or "the scary one". It seems to have been that way "for ever", in the perception of many who have trodden the learning pathways through the world of number. But, does it have to be like this? Clearly the…

  3. Mechanical Engineering Department technical review

    Energy Technology Data Exchange (ETDEWEB)

    Carr, R.B.; Abrahamson, L.; Denney, R.M.; Dubois, B.E (eds.)

    1982-01-01

    Technical achievements and publication abstracts related to research in the following Divisions of Lawrence Livermore Laboratory are reported in this biannual review: Nuclear Fuel Engineering; Nuclear Explosives Engineering; Weapons Engineering; Energy Systems Engineering; Engineering Sciences; Magnetic Fusion Engineering; and Material Fabrication. (LCL)

  4. Maintenance Management in the ST Division

    CERN Document Server

    Rühl, I

    2001-01-01

    The Maintenance Manager Working Group was established in order to revise existing maintenance contracts and to provide comprehensive and applicable tools for the execution of maintenance activities in the ST Division. This was necessary mainly due to the fact that the maintenance plans in the Division have often evolved rather than being consciously set up and in respect to the change towards result orientated contracts. Also, because the decrease of CERN staff and the trend towards outsourcing, a tighter and well-organised maintenance management has to be established. In order to achieve the most realistic and applicable results the technical and commercial aspects must be considered by following the industrial approach. This document will outline the objectives of the working group and will show the progress that has been made by the implementation of already achieved results. Furthermore this paper will show a possible structure of future maintenance management.

  5. Podcast: The Electronic Crimes Division

    Science.gov (United States)

    Sept 26, 2016. Chris Lukas, the Special Agent in Charge of the Electronic Crimes Division within the OIG's Office of Investigations talks about computer forensics, cybercrime in the EPA and his division's role in criminal investigations.

  6. 2016 T Division Lightning Talks

    Energy Technology Data Exchange (ETDEWEB)

    Ramsey, Marilyn Leann [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Theoretical Division; Adams, Luke Clyde [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Theoretical Division; Ferre, Gregoire Robing [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Theoretical Division; Grantcharov, Vesselin [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Theoretical Division; Iaroshenko, Oleksandr [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Theoretical Division; Krishnapriyan, Aditi [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Theoretical Division; Kurtakoti, Prajvala Kishore [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Theoretical Division; Le Thien, Minh Quan [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Theoretical Division; Lim, Jonathan Ng [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Theoretical Division; Low, Thaddeus Song En [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Theoretical Division; Lystrom, Levi Aaron [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Theoretical Division; Ma, Xiaoyu [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Theoretical Division; Nguyen, Hong T. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Theoretical Division; Pogue, Sabine Silvia [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Theoretical Division; Orandle, Zoe Ann [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Theoretical Division; Reisner, Andrew Ray [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Theoretical Division; Revard, Benjamin Charles [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Theoretical Division; Roy, Julien [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Theoretical Division; Sandor, Csanad [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Theoretical Division; Slavkova, Kalina Polet [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Theoretical Division; Weichman, Kathleen Joy [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Theoretical Division; Wu, Fei [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Theoretical Division; Yang, Yang [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Theoretical Division

    2016-11-29

    These are the slides for all of the 2016 T Division lightning talks. There are 350 pages worth of slides from different presentations, all of which cover different topics within the theoretical division at Los Alamos National Laboratory (LANL).

  7. 75 FR 16178 - Antitrust Division

    Science.gov (United States)

    2010-03-31

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF JUSTICE Antitrust Division Notice Pursuant to the National Cooperative Research and Production Act of 1993--Joint... Director of Operations, Antitrust Division. BILLING CODE 4410-11-M...

  8. Division of Labor

    KAUST Repository

    Oke, Muse

    2014-09-12

    The first assignment of DNA polymerases at the eukaryotic replication fork was possible after the in vitro reconstitution of the simian virus 40 (SV40) replication system. In this system, DNA polymerase α (Pol α) provides both leading and lagging strands with RNA-DNA primers that are extended by DNA polymerase δ (Pol δ). Extrapolating the architecture of the replication fork from the SV40 model system to an actual eukaryotic cell has been challenged by the discovery of a third DNA polymerase in Saccharomyces cerevisiae, DNA polymerase ε (Pol ε). A division of labor has been proposed for the eukaryotic replication fork whereby Pol ε replicates the leading strand and Pol δ replicates the lagging strand. However, an alternative model of unequal division of labor in which Pol δ can still participate in leading-strand synthesis is plausible.

  9. 2008 Florida Division of Emergency Management (FDEM) Lidar Project: Pasco County

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set is one component of a digital terrain model (DTM) for the Florida Division of Emergency Management's (FDEM) Project Management and Technical Services...

  10. Biorepositories- | Division of Cancer Prevention

    Science.gov (United States)

    Carefully collected and controlled high-quality human biospecimens, annotated with clinical data and properly consented for investigational use, are available through the Division of Cancer Prevention Biorepositories listed in the charts below. Biorepositories Managed by the Division of Cancer Prevention Biorepositories Supported by the Division of Cancer Prevention Related Biorepositories | Information about accessing biospecimens collected from DCP-supported clinical trials and projects.

  11. Division Quilts: A Measurement Model

    Science.gov (United States)

    Pratt, Sarah S.; Lupton, Tina M.; Richardson, Kerri

    2015-01-01

    As teachers seek activities to assist students in understanding division as more than just the algorithm, they find many examples of division as fair sharing. However, teachers have few activities to engage students in a quotative (measurement) model of division. Efraim Fischbein and his colleagues (1985) defined two types of whole-number…

  12. Physics division annual report 2005.

    Energy Technology Data Exchange (ETDEWEB)

    Glover, J.; Physics

    2007-03-12

    isotopes were trapped in an atom trap for the first time, a major milestone in an innovative search for the violation of time-reversal symmetry. New results from HERMES establish that strange quarks carry little of the spin of the proton and precise results have been obtained at JLAB on the changes in quark distributions in light nuclei. New theoretical results reveal that the nature of the surfaces of strange quark stars. Green's function Monte Carlo techniques have been extended to scattering problems and show great promise for the accurate calculation, from first principles, of important astrophysical reactions. Flame propagation in type 1A supernova has been simulated, a numerical process that requires considering length scales that vary by factors of eight to twelve orders of magnitude. Argonne continues to lead in the development and exploitation of the new technical concepts that will truly make an advanced exotic beam facility, in the words of NSAC, 'the world-leading facility for research in nuclear structure and nuclear astrophysics'. Our science and our technology continue to point the way to this major advance. It is a tremendously exciting time in science for these new capabilities hold the keys to unlocking important secrets of nature. The great progress that has been made in meeting the exciting intellectual challenges of modern nuclear physics reflects the talents and dedication of the Physics Division staff and the visitors, guests and students who bring so much to the research.

  13. Biology Division progress report, October 1, 1984-September 30, 1985

    Energy Technology Data Exchange (ETDEWEB)

    1986-01-01

    The body of this report provides summaries of the aims, scope and progress of the research by groups of investigators in the Division during the period of October 1, 1984, through September 30, 1985. At the end of each summary is a list of publications covering the same period. For convenience, the summaries are assembled under Sections in accordance with the current organizational structure of the Biology Division; each Section begins with an overview. It will be apparent, however, tha crosscurrents run throughout the Division and that the various programs support and interact with each other. In addition, this report includes information on the Division's educational activities, Advisory Committee, seminar program, and international interactions, as well as extramural activities of staff members, abstracts for technical meetings, and funding and personnel levels.

  14. Occupational Safety and Health Administration (OSHA) Technical Support Committee

    Science.gov (United States)

    2000-12-29

    0575 N5-95-1 Occupational Safety & Health Administration (OSHA) Technical Support Committee U.S. DEPARTMENT OF THE NAVY CARDEROCK DIVISION, NAVAL...4. TITLE AND SUBTITLE The National Shipbuilding Research Program, Occupational Safety & Health Administration (OSHA) Technical Support...SPECIFICALLY DISCLAIMED. Sp-5 Safety and Health Final Report Occupational Safety & Health Administration (OSHA) Technical Support Committee Task No

  15. CAS Academic Divisions in 2001

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    @@ 1.Election of New Members In 2001, 56 scientists were elected new CAS members, including l0 in the Division of Mathematics & Physics, 10 in the Division of Chemistry, 12 in the Division of Biology, nine in the Division of Earth Sciences and 15 in the Division of Engineering Sciences.The average age of the new members is 60.4, and the youngest one is 38 years old. They are now working in nine provinces or municipalities, or governmental departments under the State Council, including 23 outstanding experts working for the CAS.

  16. E-Division semiannual report. Progress report, June 1--December 31, 1977. [Electronics and Instrumentation Division, LASL

    Energy Technology Data Exchange (ETDEWEB)

    Kelley, P.A. (comp.)

    1978-03-01

    The status of the programs and projects of the Electronics Division is reported for the period of June through December 1977. The presentation is divided into three sections: Research, Engineering Support, and Technical Services. Each of these sections presents the activities and accomplishments of the corresponding branch within the Division. The primary goal of the Research and Development branch is to advance technology for future applications. The primary goal of the Engineering Support branch is to apply advanced technology to laboratory and material problems. The primary goal of the Technical Services branch is to provide a technical base and support for Laboratory programs. These goals are reflected in this report. Among the subject areas included are the following: radiation detectors, temperature monitoring, electromagnetic probing, Josephson junction switching devices, fiber optics, high-temperature electronics, HVAC systems, microprocessors, fuel cell-powered vehicles, laser fusion.

  17. Neuron division or enucleation.

    Science.gov (United States)

    Sotnikov, O S; Laktionova, A A; Solovieva, I A; Krasnova, T V

    2010-10-01

    The classical Bielschowsky-Gross neurohistological method was used to reproduce all the morphological phenomena interpreted by many authors as signs of neuron division, budding, and fission. It is suggested that these signs are associated with the effects of enucleation, which occurs in many cells of other tissue types in response to a variety of chemical and physical treatments. Studies were performed using neurons isolated from the mollusk Lymnaea stagnalis and exposed in tissue culture to the actin microfilament inhibitor cytochalasin B. Phase contrast time-lapse video recording over periods of 4-8 h demonstrated nuclear displacement, ectopization, and budding, to the level of almost complete fission of the neuron body. This repeats the pattern seen in static fixed preparations in "normal" conditions and after different experimental treatments. Budding of the cytoplasm was also sometimes seen at the early stages of the experiments. Control experiments in which cultured neurons were exposed to the solvent for cytochalasin B, i.e., dimethylsulfoxide (DMSO), did not reveal any changes in neurons over a period of 8 h. We take the view that the picture previously interpreted as neuron division and fission can be explained in terms of the inhibition of actin microfilaments, sometimes developing spontaneously in cells undergoing individual metabolic changes preventing the maintenance of cytoskeleton stability.

  18. Deconstructing Calculation Methods, Part 4: Division

    Science.gov (United States)

    Thompson, Ian

    2008-01-01

    In the final article of a series of four, the author deconstructs the primary national strategy's approach to written division. The approach to division is divided into five stages: (1) mental division using partition; (2) short division of TU / U; (3) "expanded" method for HTU / U; (4) short division of HTU / U; and (5) long division. [For part…

  19. Physics Division annual report 2004.

    Energy Technology Data Exchange (ETDEWEB)

    Glover, J.

    2006-04-06

    continues to lead in the development and exploitation of the new technical concepts that will truly make RIA, in the words of NSAC, ''the world-leading facility for research in nuclear structure and nuclear astrophysics''. The performance standards for new classes of superconducting cavities continue to increase. Driver linac transients and faults have been analyzed to understand reliability issues and failure modes. Liquid-lithium targets were shown to successfully survive the full-power deposition of a RIA beam. Our science and our technology continue to point the way to this major advance. It is a tremendously exciting time in science for RIA holds the keys to unlocking important secrets of nature. The work described here shows how far we have come and makes it clear we know the path to meet these intellectual challenges. The great progress that has been made in meeting the exciting intellectual challenges of modern nuclear physics reflects the talents and dedication of the Physics Division staff and the visitors, guests and students who bring so much to the research.

  20. Bipolarity and the relational division

    OpenAIRE

    Tamani, Nouredine; Lietard, Ludovic; Rocacher, Daniel

    2011-01-01

    International audience; A fuzzy bipolar relation is a relation defined by a fuzzy bipolar condition, which could be interpreted as an association of a constraint and a wish. In this context, the extension of the relational division operation to bipolarity is studied in this paper. Firstly, we define a bipolar division when the involved relations are crisp. Then, we define, from the semantic point of view, several forms of bipolar division when the involved relations are defined by fuzzy bipol...

  1. Situational Awareness and Logistics Division

    Data.gov (United States)

    Federal Laboratory Consortium — Volpe's Situational Awareness and Logistics Division researches, develops, implements, and analyzes advanced systems to protect, enhance, and ensure resilienceof the...

  2. Systems Safety and Engineering Division

    Data.gov (United States)

    Federal Laboratory Consortium — Volpe's Systems Safety and Engineering Division conducts engineering, research, and analysis to improve transportation safety, capacity, and resiliency. We provide...

  3. Security and Emergency Management Division

    Data.gov (United States)

    Federal Laboratory Consortium — Volpe's Security and Emergency Management Division identifies vulnerabilities, risks, and opportunities to improve the security of transportation systems, critical...

  4. Infrastructure Engineering and Deployment Division

    Data.gov (United States)

    Federal Laboratory Consortium — Volpe's Infrastructure Engineering and Deployment Division advances transportation innovation by being leaders in infrastructure technology, including vehicles and...

  5. Accelerator Technology Division

    Science.gov (United States)

    1992-04-01

    In fiscal year (FY) 1991, the Accelerator Technology (AT) division continued fulfilling its mission to pursue accelerator science and technology and to develop new accelerator concepts for application to research, defense, energy, industry, and other areas of national interest. This report discusses the following programs: The Ground Test Accelerator Program; APLE Free-Electron Laser Program; Accelerator Transmutation of Waste; JAERI, OMEGA Project, and Intense Neutron Source for Materials Testing; Advanced Free-Electron Laser Initiative; Superconducting Super Collider; The High-Power Microwave Program; (Phi) Factory Collaboration; Neutral Particle Beam Power System Highlights; Accelerator Physics and Special Projects; Magnetic Optics and Beam Diagnostics; Accelerator Design and Engineering; Radio-Frequency Technology; Free-Electron Laser Technology; Accelerator Controls and Automation; Very High-Power Microwave Sources and Effects; and GTA Installation, Commissioning, and Operations.

  6. Engineering Physics and Mathematics Division progress report for period ending March 31, 1991

    Energy Technology Data Exchange (ETDEWEB)

    1991-10-01

    The primary purpose of this report is to provide an archival record of the activities of the Engineering Physics and Mathematics Division during the period September 1, 1989 through March 31, 1991. Earlier reports in this series are identified on the previous pages, along with the progress reports describing ORNL's research on the mathematical sciences prior to 1984 when those activities moved into the division. As in previous reports, our research is described through abstracts of journal articles, technical reports, and presentations. Summary lists of publications and presentations, staff additions and departures, scientific and professional activities of division staff, and technical conferences organized and sponsored by the division are included as appendices. The report is organized following the division of our research among four sections and information centers. These research areas are: Mathematical Sciences; Nuclear Data Measurement and Evaluations; Intelligent Systems; Nuclear Analysis and Shielding; and Engineering Physics Information Center.

  7. Information Technology Division’s Technical Paper Abstracts

    Science.gov (United States)

    1994-07-05

    bandwidth between the user and the machine. Title: The Egocentric Projection of Imagery in Front of the Screen (Back Through the Looking Glass ) Author(s...Movement User Interfaces, Robert J.K. Jacob [ I HCI-93-012 The Egocentric Projection of Imagery in Front of the Screen (Back Through the Looking Glass ), James

  8. Technical Division quarterly progress report, January 1--March 31, 1977

    Energy Technology Data Exchange (ETDEWEB)

    Slansky, C.M. (ed.)

    1977-05-01

    Progress is reported in three categories: Fuel Cycle Research and Development, special materials production, and projects supporting energy development. Results are presented on the fluidized-bed calcination of high-level radioactive waste from the reprocessing of spent commercial nuclear fuel, on the post treatment of the calcine, and on the removal of actinide elements from the waste prior to calcination. Other projects include the development of storage technology for /sup 85/Kr waste; a study of the hydrogen mordenite catalyzed reaction between NO/sub x/ and NH/sub 3/; the adsorption and storage of /sup 129/I on silver exchanged mordenite; physical properties, materials of construction, and unit operations studies on the evaporation of high-level waste; the behavior of volatile radionuclides during the combustion of HTGR graphite-based fuel; and the use of fission product ruthenium in age-dating uranium ore bodies. The long-term management of defense waste from the ICPP covers post-calcination treatment of ICPP calcined waste. Improvements are reported on the Fluorinel head end process for Zircaloy-clad fuels. Studies are included on nuclear materials security; application of a liquid-solid fluidized-bed heat exchanger to the recovery of geothermal heat; inplant reactor source term measurements; burnup methods for fast breeder reactor fuels; research on analytical methods; and the behavior of environmental species of iodine.

  9. Technical Division quarterly progress report, April 1--June 30, 1977

    Energy Technology Data Exchange (ETDEWEB)

    Slansky, C.M.; Dickey, B.R.; Musgrave, B.C.; Rohde, K.L.

    1977-07-01

    Fuel Cycle Research and Development: Results are presented on the fluidized-bed calcination of high-level radioactive waste from reprocessing on the post treatment of the calcine, and on the removal of actinide elements from the waste prior to calcination. Other projects include the development of storage technology for /sup 85/Kr waste; a study of the hydrogen mordenite catalyzed reaction between NO/sub x/ and NH/sub 3/; the adsorption and storage of /sup 129/I on silver exchanged mordenite; physical properties, materials of construction, and unit operations studies on the evaporation of high-level waste; the behavior of volatile radionuclides during the combustion of HTGR graphite-based fuel; and the use of the uranium-ruthenium system in age-dating uranium ore bodies. Special Materials Production: The long-term management of defense waste from the ICPP covers postcalcination treatment of ICPP calcined waste; the removal of actinide elements from first-cycle raffinate; the retrieval and handling of calcined waste from ICPP storage vaults; and the preparation of the ''Defense Waste Document''. Process improvements are reported on the Fluorinel headend process for Zircaloy-clad fuels and on uranium accountability measurements. Other development results cover the process for recovering spent Rover fuel, buried pipeline transfer systems, support to the Waste Management Program, and effluent monitoring methods evaluation and development. Other Projects Supporting Energy Development: In this category are studies on nuclear materials security; application of a liquid-solid fluidized-bed heat exchanger to the recovery of geothermal heat; in-plant reactor source term measurements; burnup methods for fast breeder reactor fuels; absolute thermal fission yield measurements; analytical support to light water breeder reactor development; research on analytical methods; and the behavior of environmental species of iodine.

  10. Air Force Technical Objective Document, Aerospace Medical Division, FY 1987

    Science.gov (United States)

    1986-01-01

    using digital subtrac- tion angiography and the accomplishment of a Holter monitoring data base will contribute to this goal. State-of-the-art...problems requiring both hard- ware and software re-work do not come to light until the flight test phase of development. This leads to significant...weapons, automation concepts, and technologies have been developed. These applications are digitally intense, software controlled and lead to the

  11. Naval Surface Warfare Center Carderock Division, Technical Digest

    Science.gov (United States)

    2001-12-01

    two vehi- cles. CUTTHROAT will be delivered to the Navy early in FY02. The vehicle names are taken from species of fish indigenous to Lake Pend Oreille...on the use of an active magnetic regenerator to produce chilled water efficiently. • Thermoacoustic Cooling - This employs sound waves to produce...fire main loop system, a copper nickel pipe test section, segregation gate valve to configure the system for Zebra (battle) condition, isolation

  12. E-Division semiannual report. Progress report, July 1--December 31, 1978

    Energy Technology Data Exchange (ETDEWEB)

    Kelley, P.A. (comp.)

    1979-01-01

    The status of the programs and projects of the Electronics Division for the period July through December 1978 is reported. The presentation is divided into three sections: Research, Engineering Support, and Technical Services. Each of these sections presents the activities and accomplishments of the corresponding branch within the Division. The primary goal of the Research and Development branch is to advance technology for future applications. The primary goal of the Engineering Support Branch is to apply advanced technology to Laboratory and material problems. The primary goal of the Technical Services Branch is to provide a technical base and support for Laboratory programs. Most of the individual reports are quite short.

  13. Frequency division using a micromechanical resonance cascade

    Energy Technology Data Exchange (ETDEWEB)

    Qalandar, K. R., E-mail: kamala@engineering.ucsb.edu; Gibson, B.; Sharma, M.; Ma, A.; Turner, K. L. [Department of Mechanical Engineering, University of California at Santa Barbara, Santa Barbara, California 93106 (United States); Strachan, B. S. [Department of Mechanical Engineering, Michigan State University, East Lansing, Michigan 48823 (United States); Department of Electrical Engineering, Michigan State University, East Lansing, Michigan 48823 (United States); Shaw, S. W. [Department of Mechanical Engineering, Michigan State University, East Lansing, Michigan 48823 (United States); Department of Physics and Astronomy, Michigan State University, East Lansing, Michigan 48823 (United States)

    2014-12-15

    A coupled micromechanical resonator array demonstrates a mechanical realization of multi-stage frequency division. The mechanical structure consists of a set of N sequentially perpendicular microbeams that are connected by relatively weak elastic elements such that the system vibration modes are localized to individual microbeams and have natural frequencies with ratios close to 1:2:⋯:2{sup N}. Conservative (passive) nonlinear inter-modal coupling provides the required energy transfer between modes and is achieved by finite deformation kinematics. When the highest frequency beam is excited, this arrangement promotes a cascade of subharmonic resonances that achieve frequency division of 2{sup j} at microbeam j for j = 1, …, N. Results are shown for a capacitively driven three-stage divider in which an input signal of 824 kHz is passively divided through three modal stages, producing signals at 412 kHz, 206 kHz, and 103 kHz. The system modes are characterized and used to delineate the range of AC input voltages and frequencies over which the cascade occurs. This narrow band frequency divider has simple design rules that are scalable to higher frequencies and can be extended to a larger number of modal stages.

  14. Developmental control of cell division

    NARCIS (Netherlands)

    Boxem, M. (Mike)

    2002-01-01

    During development of multicellular organisms, cell divisions need to be coordinated with the developmental program of the entire organism. Although the mechanisms that drive cells through the division cycle are well understood, very little is known about the pathways that link extracellular signals

  15. Lightning Talks 2015: Theoretical Division

    Energy Technology Data Exchange (ETDEWEB)

    Shlachter, Jack S. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-11-25

    This document is a compilation of slides from a number of student presentations given to LANL Theoretical Division members. The subjects cover the range of activities of the Division, including plasma physics, environmental issues, materials research, bacterial resistance to antibiotics, and computational methods.

  16. Developmental control of cell division

    NARCIS (Netherlands)

    Boxem, M. (Mike)

    2002-01-01

    During development of multicellular organisms, cell divisions need to be coordinated with the developmental program of the entire organism. Although the mechanisms that drive cells through the division cycle are well understood, very little is known about the pathways that link extracellular signals

  17. Division of Analytical Chemistry, 1998

    DEFF Research Database (Denmark)

    Hansen, Elo Harald

    1999-01-01

    The article recounts the 1998 activities of the Division of Analytical Chemistry (DAC- formerly the Working Party on Analytical Chemistry, WPAC), which body is a division of the Federation of European Chemical Societies (FECS). Elo Harald Hansen is the Danish delegate, representing The Danish...... Chemical Society/The Society for Analytical Chemistry....

  18. 78 FR 17431 - Antitrust Division

    Science.gov (United States)

    2013-03-21

    ... January 2, 2013 (78 FR 117). Patricia A. Brink, Director of Civil Enforcement, Antitrust Division. BILLING...) of the Act on July 30, 2001 (66 FR 39336). The last notification was filed with the Department on... Antitrust Division Notice Pursuant to the National Cooperative Research and Production Act of...

  19. 77 FR 54611 - Antitrust Division

    Science.gov (United States)

    2012-09-05

    ... on June 8, 2012 (77 FR 34067). Patricia A. Brink, Director of Civil Enforcement, Antitrust Division... Section 6(b) of the Act on June 30, 2000 (65 FR 40693). The last notification was filed with the... Antitrust Division Notice Pursuant to the National Cooperative Research and Production Act of...

  20. Physics division annual report 1999

    Energy Technology Data Exchange (ETDEWEB)

    Thayer, K., ed.; Physics

    2000-12-06

    This report summarizes the research performed in the past year in the Argonne Physics Division. The Division's programs include operation of ATLAS as a national heavy-ion user facility, nuclear structure and reaction research with beams of heavy ions, accelerator research and development especially in superconducting radio frequency technology, nuclear theory and medium energy nuclear physics. The Division took significant strides forward in its science and its initiatives for the future in the past year. Major progress was made in developing the concept and the technology for the future advanced facility of beams of short-lived nuclei, the Rare Isotope Accelerator. The scientific program capitalized on important instrumentation initiatives with key advances in nuclear science. In 1999, the nuclear science community adopted the Argonne concept for a multi-beam superconducting linear accelerator driver as the design of choice for the next major facility in the field a Rare Isotope Accelerator (WA) as recommended by the Nuclear Science Advisory Committee's 1996 Long Range Plan. Argonne has made significant R&D progress on almost all aspects of the design concept including the fast gas catcher (to allow fast fragmentation beams to be stopped and reaccelerated) that in large part defined the RIA concept the superconducting rf technology for the driver accelerator, the multiple-charge-state concept (to permit the facility to meet the design intensity goals with existing ion-source technology), and designs and tests of high-power target concepts to effectively deal with the full beam power of the driver linac. An NSAC subcommittee recommended the Argonne concept and set as tie design goal Uranium beams of 100-kwatt power at 400 MeV/u. Argonne demonstrated that this goal can be met with an innovative, but technically in-hand, design. The heavy-ion research program focused on GammaSphere, the premier facility for nuclear structure gamma-ray studies. One example

  1. Physics division annual report 1999

    Energy Technology Data Exchange (ETDEWEB)

    Thayer, K., ed.; Physics

    2000-12-06

    This report summarizes the research performed in the past year in the Argonne Physics Division. The Division's programs include operation of ATLAS as a national heavy-ion user facility, nuclear structure and reaction research with beams of heavy ions, accelerator research and development especially in superconducting radio frequency technology, nuclear theory and medium energy nuclear physics. The Division took significant strides forward in its science and its initiatives for the future in the past year. Major progress was made in developing the concept and the technology for the future advanced facility of beams of short-lived nuclei, the Rare Isotope Accelerator. The scientific program capitalized on important instrumentation initiatives with key advances in nuclear science. In 1999, the nuclear science community adopted the Argonne concept for a multi-beam superconducting linear accelerator driver as the design of choice for the next major facility in the field a Rare Isotope Accelerator (WA) as recommended by the Nuclear Science Advisory Committee's 1996 Long Range Plan. Argonne has made significant R&D progress on almost all aspects of the design concept including the fast gas catcher (to allow fast fragmentation beams to be stopped and reaccelerated) that in large part defined the RIA concept the superconducting rf technology for the driver accelerator, the multiple-charge-state concept (to permit the facility to meet the design intensity goals with existing ion-source technology), and designs and tests of high-power target concepts to effectively deal with the full beam power of the driver linac. An NSAC subcommittee recommended the Argonne concept and set as tie design goal Uranium beams of 100-kwatt power at 400 MeV/u. Argonne demonstrated that this goal can be met with an innovative, but technically in-hand, design. The heavy-ion research program focused on GammaSphere, the premier facility for nuclear structure gamma-ray studies. One example

  2. Oriented cell divisions in the extending germband of Drosophila.

    Science.gov (United States)

    da Silva, Sara Morais; Vincent, Jean-Paul

    2007-09-01

    Tissue elongation is a general feature of morphogenesis. One example is the extension of the germband, which occurs during early embryogenesis in Drosophila. In the anterior part of the embryo, elongation follows from a process of cell intercalation. In this study, we follow cell behaviour at the posterior of the extending germband. We find that, in this region, cell divisions are mostly oriented longitudinally during the fast phase of elongation. Inhibiting cell divisions prevents longitudinal deformation of the posterior region and leads to an overall reduction in the rate and extent of elongation. Thus, as in zebrafish embryos, cell intercalation and oriented cell division together contribute to tissue elongation. We also show that the proportion of longitudinal divisions is reduced when segmental patterning is compromised, as, for example, in even skipped (eve) mutants. Because polarised cell intercalation at the anterior germband also requires segmental patterning, a common polarising cue might be used for both processes. Even though, in fish embryos, both mechanisms require the classical planar cell polarity (PCP) pathway, germband extension and oriented cell divisions proceed normally in embryos lacking dishevelled (dsh), a key component of the PCP pathway. An alternative means of planar polarisation must therefore be at work in the embryonic epidermis.

  3. Physics Division computer facilities

    Energy Technology Data Exchange (ETDEWEB)

    Cyborski, D.R.; Teh, K.M.

    1995-08-01

    The Physics Division maintains several computer systems for data analysis, general-purpose computing, and word processing. While the VMS VAX clusters are still used, this past year saw a greater shift to the Unix Cluster with the addition of more RISC-based Unix workstations. The main Divisional VAX cluster which consists of two VAX 3300s configured as a dual-host system serves as boot nodes and disk servers to seven other satellite nodes consisting of two VAXstation 3200s, three VAXstation 3100 machines, a VAX-11/750, and a MicroVAX II. There are three 6250/1600 bpi 9-track tape drives, six 8-mm tapes and about 9.1 GB of disk storage served to the cluster by the various satellites. Also, two of the satellites (the MicroVAX and VAX-11/750) have DAPHNE front-end interfaces for data acquisition. Since the tape drives are accessible cluster-wide via a software package, they are, in addition to replay, used for tape-to-tape copies. There is however, a satellite node outfitted with two 8 mm drives available for this purpose. Although not part of the main cluster, a DEC 3000 Alpha machine obtained for data acquisition is also available for data replay. In one case, users reported a performance increase by a factor of 10 when using this machine.

  4. Deformations of crystal frameworks

    CERN Document Server

    Borcea, Ciprian S

    2011-01-01

    We apply our deformation theory of periodic bar-and-joint frameworks to tetrahedral crystal structures. The deformation space is investigated in detail for frameworks modelled on quartz, cristobalite and tridymite.

  5. Deformed General Relativity

    CERN Document Server

    Bojowald, Martin

    2013-01-01

    Deformed special relativity is embedded in deformed general relativity using the methods of canonical relativity and loop quantum gravity. Phase-space dependent deformations of symmetry algebras then appear, which in some regimes can be rewritten as non-linear Poincare algebras with momentum-dependent deformations of commutators between boosts and time translations. In contrast to deformed special relativity, the deformations are derived for generators with an unambiguous physical role, following from the relationship between canonical constraints of gravity with stress-energy components. The original deformation does not appear in momentum space and does not give rise to non-locality issues or problems with macroscopic objects. Contact with deformed special relativity may help to test loop quantum gravity or restrict its quantization ambiguities.

  6. Life Sciences Division and Center for Human Genome Studies 1994

    Energy Technology Data Exchange (ETDEWEB)

    Cram, L.S.; Stafford, C. [comp.

    1995-09-01

    This report summarizes the research and development activities of the Los Alamos National Laboratory`s Life Sciences Division and the biological aspects of the Center for Human Genome Studies for the calendar year 1994. The technical portion of the report is divided into two parts, (1) selected research highlights and (2) research projects and accomplishments. The research highlights provide a more detailed description of a select set of projects. A technical description of all projects is presented in sufficient detail so that the informed reader will be able to assess the scope and significance of each project. Summaries useful to the casual reader desiring general information have been prepared by the group leaders and appear in each group overview. Investigators on the staff of the Life Sciences Division will be pleased to provide further information.

  7. Reports on crustal movements and deformations

    Science.gov (United States)

    Cohen, S. C.; Peck, T.

    1981-01-01

    Studies of tectonic plate motions, regional crustal deformations, strain accumulation and release, deformations associated with earthquakes and fault motion, and micro-plate motion, were collected and are summarized. To a limited extent, papers dealing with global models of current plate motions and crustal stress are included. The data base is restricted to articles appearing in reveiwed technical journals during the years 1970-1980. The major journals searched include: Journal of Geophysical Research (solid earth), Tectonophysics, Bulletin of the Seismological Society of America, Geological Society of America Bulletin, Geophysical Journal of the Royal Astronomical Society, and the Journal of Geology.

  8. Physics division annual report 2006.

    Energy Technology Data Exchange (ETDEWEB)

    Glover, J.; Physics

    2008-02-28

    This report highlights the activities of the Physics Division of Argonne National Laboratory in 2006. The Division's programs include the operation as a national user facility of ATLAS, the Argonne Tandem Linear Accelerator System, research in nuclear structure and reactions, nuclear astrophysics, nuclear theory, investigations in medium-energy nuclear physics as well as research and development in accelerator technology. The mission of nuclear physics is to understand the origin, evolution and structure of baryonic matter in the universe--the core of matter, the fuel of stars, and the basic constituent of life itself. The Division's research focuses on innovative new ways to address this mission.

  9. Physics division annual report - October 2000.

    Energy Technology Data Exchange (ETDEWEB)

    Thayer, K. [ed.

    2000-10-16

    This report summarizes the research performed in the past year in the Argonne Physics Division. The Division's programs include operation of ATLAS as a national heavy-ion user facility, nuclear structure and reaction research with beams of heavy ions, accelerator research and development especially in superconducting radio frequency technology, nuclear theory and medium energy nuclear physics. The Division took significant strides forward in its science and its initiatives for the future in the past year. Major progress was made in developing the concept and the technology for the future advanced facility of beams of short-lived nuclei, the Rare Isotope Accelerator. The scientific program capitalized on important instrumentation initiatives with key advances in nuclear science. In 1999, the nuclear science community adopted the Argonne concept for a multi-beam superconducting linear accelerator driver as the design of choice for the next major facility in the field a Rare Isotope Accelerator (RIA) as recommended by the Nuclear Science Advisory Committee's 1996 Long Range Plan. Argonne has made significant R&D progress on almost all aspects of the design concept including the fast gas catcher (to allow fast fragmentation beams to be stopped and reaccelerated) that in large part, defined the RIA concept the superconducting rf technology for the driver accelerator, the multiple-charge-state concept (to permit the facility to meet the design intensity goals with existing ion-source technology), and designs and tests of high-power target concepts to effectively deal with the full beam power of the driver linac. An NSAC subcommittee recommended the Argonne concept and set as tie design goal Uranium beams of 100-kwatt power at 400 MeV/u. Argonne demonstrated that this goal can be met with an innovative, but technically in-hand, design.

  10. ftsZ gene and plastid division

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    Plastid is one of the most important cellular organelles, the normal division process of plastid is essential for the differentiation and development of plant cells. For a long time, morphological observations and genetic analyses to special mutants are the major research fields of plastid division, but the molecular mechanisms underlying plastid division are largely unknown. Because of the endosymbiotic origin, plastid division might have mechanisms in common with those involved in bacterial cell division. It has been proved that several prokaryotic cell division genes also participate in the plastid division. Recently, the mechanisms of prokaryotic cell division have been well documented, which provides a valuable paradigm for understanding the plastid division mechanisms. In plants, the functional analyses of ftsZ, a key gene involved both in bacteria and plastid division, have established the solid foundation for people to understand the plastid division in molecular level. In this paper we will make a review for the research history and progress of plastid division.

  11. Technical Network

    CERN Multimedia

    2007-01-01

    In order to optimize the management of the Technical Network (TN), to ease the understanding and purpose of devices connected to the TN, and to improve security incident handling, the Technical Network Administrators and the CNIC WG have asked IT/CS to verify the "description" and "tag" fields of devices connected to the TN. Therefore, persons responsible for systems connected to the TN will receive email notifications from IT/CS asking them to add the corresponding information in the network database. Thank you very much for your cooperation. The Technical Network Administrators & the CNIC WG

  12. Technical Network

    CERN Multimedia

    2007-01-01

    In order to optimise the management of the Technical Network (TN), to facilitate understanding of the purpose of devices connected to the TN and to improve security incident handling, the Technical Network Administrators and the CNIC WG have asked IT/CS to verify the "description" and "tag" fields of devices connected to the TN. Therefore, persons responsible for systems connected to the TN will receive e-mails from IT/CS asking them to add the corresponding information in the network database at "network-cern-ch". Thank you very much for your cooperation. The Technical Network Administrators & the CNIC WG

  13. Deformable Nanolaminate Optics

    Energy Technology Data Exchange (ETDEWEB)

    Olivier, S S; Papavasiliou, A P; Barbee, T W; Miles, R R; Walton, C C; Cohn, M B; Chang, K

    2006-05-12

    We are developing a new class of deformable optic based on electrostatic actuation of nanolaminate foils. These foils are engineered at the atomic level to provide optimal opto-mechanical properties, including surface quality, strength and stiffness, for a wide range of deformable optics. We are combining these foils, developed at Lawrence Livermore National Laboratory (LLNL), with commercial metal processing techniques to produce prototype deformable optics with aperture sizes up to 10 cm and actuator spacing from 1 mm to 1 cm and with a range of surface deformation designed to be as much as 10 microns. The existing capability for producing nanolaminate foils at LLNL, coupled with the commercial metal processing techniques being used, enable the potential production of these deformable optics with aperture sizes of over 1 m, and much larger deformable optics could potentially be produced by tiling multiple deformable segments. In addition, based on the fabrication processes being used, deformable nanolaminate optics could potentially be produced with areal densities of less than 1 kg per square m for applications in which lightweight deformable optics are desirable, and deformable nanolaminate optics could potentially be fabricated with intrinsically curved surfaces, including aspheric shapes. We will describe the basic principles of these devices, and we will present details of the design, fabrication and characterization of the prototype deformable nanolaminate optics that have been developed to date. We will also discuss the possibilities for future work on scaling these devices to larger sizes and developing both devices with lower areal densities and devices with curved surfaces.

  14. Division 1137 property control system

    Energy Technology Data Exchange (ETDEWEB)

    Pastor, D.J.

    1982-01-01

    An automated data processing property control system was developed by Mobile and Remote Range Division 1137. This report describes the operation of the system and examines ways of using it in operational planning and control.

  15. High division of sciatic nerve

    Directory of Open Access Journals (Sweden)

    Tripti Shrivastava

    2014-04-01

    Results: In all except two cadavers, the nerve divided at the apex of the popliteal fossa. In two cadavers the sciatic nerve divided bilaterally in the upper part of thigh. Conclusion: The high division presented in this study can make popliteal nerve blocks partially ineffective. The high division of sciatic nerve must always be borne in mind as they have important clinical implications. [Int J Res Med Sci 2014; 2(2.000: 686-688

  16. Metals and Ceramics Division progress report for period ending December 31, 1992

    Energy Technology Data Exchange (ETDEWEB)

    Craig, D.F.; Weir, J.R. Jr.

    1993-04-01

    This report provides a brief overview of the activities and accomplishments of the division, whose purpose is to provide technical support, primarily in the area of high-temperature materials, for the various technologies being developed by US DOE. Activities range from basic research to industrial research and technology transfer. The division (and the report) is divided into the following: Engineering materials, high-temperature materials, materials science, ceramics, nuclear fuel materials, program activities, collaborative research facilities and technology transfer, and educational programs.

  17. 230"经编机压电贾卡梳栉的数控铣削变形工艺研究%Research on the NC Milling Deformation Technics of Piezo Jacquard Guide Bar Used on 230" Warp Knitting Machine

    Institute of Scientific and Technical Information of China (English)

    刘炉; 刘相果; 李瑞峰; 徐莉萍; 陶骏

    2013-01-01

    Based on the main factors resulting in NC milling errors of piezo-jacquard guide bar used on 230 warp knitting machine,the NC milling techniques of long and thin workpieces affecting machining quality in the manufacture process,such as machining path,cutting strategy,fixing workpieces and cutting parameters were analyzed. The techniques and technological ways of controlling deformation and improving milling precision and surface quality were proposed. The results showed that the milling precision and the surface quality requirement was reached because of the milling technique of piezo-jacquard guide bar.%针对230"经编机压电贾卡梳栉数控铣削加工误差产生的主要原因,分析了该类超长细薄零件数控铣削加工过程中涉及到的工艺路线、走刀策略、工件装夹及切削参数等对加工质量的影响,提出了减小贾卡梳栉的数控铣削加工变形,提高其加工精度和表面质量的工艺措施.实验结果表明,采用该文提出的贾卡梳栉铣削工艺,零件的加工精度及表面粗糙度均达到了使用要求.

  18. Technical Scheme and Deformation Control Technology of Transmission Line in Coal Mining Area%煤矿采动区输电线路技术方案与变形治理技术

    Institute of Scientific and Technical Information of China (English)

    阎涛; 袁广林; 王永安

    2015-01-01

    指出采空区塌陷一直是影响山西省电力线路安全运行的重大隐患,分析了煤矿地下开采对山西省地面输电杆塔的影响,提出了采动区输电线路规划设计技术,形成了线路通过沉陷区设计的技术方案,分析了采动区地基与基础的设计方法,总结了采后区输电线路的维修与治理方案,可为类似工程提供参考。%Coal mining area subsidence is a major hidden trouble to the safe operation of the electric transmission line in Shanxi Province. This paper analyzed the impact of the underground coal mining on the ground transmission tower in Shanxi Province. The planning and design technique of transmission line in mining area was proposed. The technical scheme for transmission line over mining subsidence area was formed. The design method of ground and foundation in mining subsidence area was analyzed. Maintenance and treatment scheme of transmission line after coal mining were summarized. The research results can provide reference for similar projects.

  19. -Deformed nonlinear maps

    Indian Academy of Sciences (India)

    Ramaswamy Jaganathan; Sudeshna Sinha

    2005-03-01

    Motivated by studies on -deformed physical systems related to quantum group structures, and by the elements of Tsallis statistical mechanics, the concept of -deformed nonlinear maps is introduced. As a specific example, a -deformation procedure is applied to the logistic map. Compared to the canonical logistic map, the resulting family of -logistic maps is shown to have a wider spectrum of interesting behaviours, including the co-existence of attractors – a phenomenon rare in one-dimensional maps.

  20. Alar Rim Deformities.

    Science.gov (United States)

    Totonchi, Ali; Guyuron, Bahman

    2016-01-01

    The alar rim plays an important role in nasal harmony. Alar rim flaws are common following the initial rhinoplasty. Classification of the deformities helps with diagnosis and successful surgical correction. Diagnosis of the deformity requires careful observation of the computerized or life-sized photographs. Techniques for treatment of these deformities can easily be learned with attention to detail. Copyright © 2016 Elsevier Inc. All rights reserved.

  1. Beyond Cookies: Understanding Various Division Models

    Science.gov (United States)

    Jong, Cindy; Magruder, Robin

    2014-01-01

    Having a deeper understanding of division derived from multiple models is of great importance for teachers and students. For example, students will benefit from a greater understanding of division contexts as they study long division, fractions, and division of fractions. The purpose of this article is to build on teachers' and students'…

  2. 77 FR 53903 - Notice of Proposed Information Collection for Public Comment: OneCPD Technical Assistance and...

    Science.gov (United States)

    2012-09-04

    ... INFORMATION CONTACT: Julie Hovden, Director, Technical Assistance Division, Office of Technical Assistance and... responses. This Notice also lists the following information: Title of Proposal: OneCPD Technical Assistance... URBAN DEVELOPMENT Notice of Proposed Information Collection for Public Comment: OneCPD Technical...

  3. Fluctuations as stochastic deformation

    Science.gov (United States)

    Kazinski, P. O.

    2008-04-01

    A notion of stochastic deformation is introduced and the corresponding algebraic deformation procedure is developed. This procedure is analogous to the deformation of an algebra of observables like deformation quantization, but for an imaginary deformation parameter (the Planck constant). This method is demonstrated on diverse relativistic and nonrelativistic models with finite and infinite degrees of freedom. It is shown that under stochastic deformation the model of a nonrelativistic particle interacting with the electromagnetic field on a curved background passes into the stochastic model described by the Fokker-Planck equation with the diffusion tensor being the inverse metric tensor. The first stochastic correction to the Newton equations for this system is found. The Klein-Kramers equation is also derived as the stochastic deformation of a certain classical model. Relativistic generalizations of the Fokker-Planck and Klein-Kramers equations are obtained by applying the procedure of stochastic deformation to appropriate relativistic classical models. The analog of the Fokker-Planck equation associated with the stochastic Lorentz-Dirac equation is derived too. The stochastic deformation of the models of a free scalar field and an electromagnetic field is investigated. It turns out that in the latter case the obtained stochastic model describes a fluctuating electromagnetic field in a transparent medium.

  4. Deformed discrete symmetries

    Science.gov (United States)

    Arzano, Michele; Kowalski-Glikman, Jerzy

    2016-09-01

    We construct discrete symmetry transformations for deformed relativistic kinematics based on group valued momenta. We focus on the specific example of κ-deformations of the Poincaré algebra with associated momenta living on (a sub-manifold of) de Sitter space. Our approach relies on the description of quantum states constructed from deformed kinematics and the observable charges associated with them. The results we present provide the first step towards the analysis of experimental bounds on the deformation parameter κ to be derived via precision measurements of discrete symmetries and CPT.

  5. Metals and Ceramics Division progress report for period ending December 31, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Craig, D.F.; Bradley, R.A.; Weir, J.R. Jr.

    1994-07-01

    This report provides an overview of activities and accomplishsments of the division from October 1992 through December 1993; the division is organized to provide technical support, mainly in the area of high-temperature materials, for technologies being developed by DOE. Activities span the range from basic research to industrial interactions (cooperative research and technology transfer). Sections 1-5 describe the different functional groups (engineering materials, high-temperature materials, materials science, ceramics, nuclear fuel materials). Sect. 6 provides an alternative view of the division in terms of the major programs, most of which cross group lines. Sect. 7 summarizes external interactions including cooperative R and D programs and technology transfer functions. Finally, Sect. 8 briefly describes the division`s involvement in educational activities. Several organizational changes were effected during this period.

  6. Program report for FY 1984 and 1985 Atmospheric and Geophysical Sciences Division of the Physics Department

    Energy Technology Data Exchange (ETDEWEB)

    Knox, J.B.; MacCracken, M.C.; Dickerson, M.H.; Gresho, P.M.; Luther, F.M.

    1986-08-01

    This annual report for the Atmospheric and Geophysical Sciences Division (G-Division) summarizes the activities and highlights of the past three years, with emphasis on significant research findings in two major program areas: the Atmospheric Release Advisory Capability (ARAC), with its recent involvement in assessing the effects of the Chernobyl reactor accident, and new findings on the environmental consequences of nuclear war. The technical highlights of the many other research projects are also briefly reported, along with the Division's organization, budget, and publications.

  7. Imagining Technicities

    DEFF Research Database (Denmark)

    Liboriussen, Bjarke; Plesner, Ursula

    2011-01-01

    The actors of the building industry have access to a range of Information and Communication Technologies (ICTs), and are constantly presented with new software and new communications platforms. Through case studies, and inspired by sociotechnical approaches to the study of emerging technologies......, this article focuses on innovative uses of virtual worlds in architecture. We interviewed architects, industrial designers and other practitioners. Conceptually supported by an understanding of technicity found in Cultural Studies, the interviews were then coded with a focus on interviewees’ references...... to the elements of taste and skill. In the final analysis those references were synthesized as five imagined technicities: the architect, the engineer, the client, the Chinese, and the Virtual World native. Because technicities are often assumed and rarely discussed as actants who influence practice, their role...

  8. Imagining Technicities

    DEFF Research Database (Denmark)

    Liboriussen, Bjarke; Plesner, Ursula

    2011-01-01

    , this article focuses on innovative uses of virtual worlds in architecture. We interviewed architects, industrial designers and other practitioners. Conceptually supported by an understanding of technicity found in Cultural Studies, the interviews were then coded with a focus on interviewees’ references......The actors of the building industry have access to a range of Information and Communication Technologies (ICTs), and are constantly presented with new software and new communications platforms. Through case studies, and inspired by sociotechnical approaches to the study of emerging technologies...... to the elements of taste and skill. In the final analysis those references were synthesized as five imagined technicities: the architect, the engineer, the client, the Chinese, and the Virtual World native. Because technicities are often assumed and rarely discussed as actants who influence practice, their role...

  9. Deformation in the continental lithosphere

    Science.gov (United States)

    The Physical Properties of Earth Materials Committee, a technical committee of AGU's Tectonophysics Section, is organizing a dinner/colloquium as part of the Fall Meeting in San Francisco, Calif. This event will be held Monday, December 3rd, in the Gold Rush Room of the Holiday Inn Golden Gateway Hotel at 1500 Van Ness St. There will be a no-host bar from 6:30 to 7:30 P.M., followed by dinner from 7:30 to 8:30 P.M. Paul Tapponnier will deliver the after-dinner talk, “Large-Scale Deformation Mechanisms in the Continental Lithosphere: Where Do We Stand?” It will start at 8:30 P.M. and a business meeting will follow at 9:30 P.M.

  10. Viscoelastic deformation of lipid bilayer vesicles†

    Science.gov (United States)

    Wu, Shao-Hua; Sankhagowit, Shalene; Biswas, Roshni; Wu, Shuyang; Povinelli, Michelle L.

    2015-01-01

    Lipid bilayers form the boundaries of the cell and its organelles. Many physiological processes, such as cell movement and division, involve bending and folding of the bilayer at high curvatures. Currently, bending of the bilayer is treated as an elastic deformation, such that its stress-strain response is independent of the rate at which bending strain is applied. We present here the first direct measurement of viscoelastic response in a lipid bilayer vesicle. We used a dual-beam optical trap (DBOT) to stretch 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) giant unilamellar vesicles (GUVs). Upon application of a step optical force, the vesicle membrane deforms in two regimes: a fast, instantaneous area increase, followed by a much slower stretching to an eventual plateau deformation. From measurements of dozens of GUVs, the average time constant of the slower stretching response was 0.225 ± 0.033 s (standard deviation, SD). Increasing the fluid viscosity did not affect the observed time constant. We performed a set of experiments to rule out heating by laser absorption as a cause of the transient behavior. Thus, we demonstrate here that the bending deformation of lipid bilayer membranes should be treated as viscoelastic. PMID:26268612

  11. Viscoelastic deformation of lipid bilayer vesicles.

    Science.gov (United States)

    Wu, Shao-Hua; Sankhagowit, Shalene; Biswas, Roshni; Wu, Shuyang; Povinelli, Michelle L; Malmstadt, Noah

    2015-10-07

    Lipid bilayers form the boundaries of the cell and its organelles. Many physiological processes, such as cell movement and division, involve bending and folding of the bilayer at high curvatures. Currently, bending of the bilayer is treated as an elastic deformation, such that its stress-strain response is independent of the rate at which bending strain is applied. We present here the first direct measurement of viscoelastic response in a lipid bilayer vesicle. We used a dual-beam optical trap (DBOT) to stretch 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) giant unilamellar vesicles (GUVs). Upon application of a step optical force, the vesicle membrane deforms in two regimes: a fast, instantaneous area increase, followed by a much slower stretching to an eventual plateau deformation. From measurements of dozens of GUVs, the average time constant of the slower stretching response was 0.225 ± 0.033 s (standard deviation, SD). Increasing the fluid viscosity did not affect the observed time constant. We performed a set of experiments to rule out heating by laser absorption as a cause of the transient behavior. Thus, we demonstrate here that the bending deformation of lipid bilayer membranes should be treated as viscoelastic.

  12. Environmental Sciences Division annual progress report for period ending September 30, 1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-04-01

    This progress report summarizes the research and development activities conducted in the Environmental Sciences Division of Oak Ridge National Laboratory during the period October 1, 1990, through September 30, 1991. The report is structured to provide descriptions of current activities and accomplishments in each of the division`s major organizational units. Following the sections describing the organizational units is a section devoted to lists of information necessary to convey the scope of the work in the division. The Environmental Sciences Division (ESD) at Oak Ridge National Laboratory (ORNL) conducts environmental research and analyses associated with both energy technology development and the interactions between people and the environment. The division engages in basic and applied research for a diverse list of sponsors. While the US Department of Energy (DOE) is the primary sponsor ESD staff also perform research for other federal agencies, state agencies, and private industry. The division works collaboratively with federal agencies, universities, and private organizations in achieving its research objectives and hosts a large number of visiting investigators from these organizations. Given the diverse interdisciplinary specialization of its staff, ESD provides technical expertise on complex environmental problems and renders technical leadership for major environmental issues of national and local concern. This progress report highlights many of ESD`s accomplishment in these and other areas in FY 1991.

  13. FtsZ does not initiate membrane constriction at the onset of division.

    Science.gov (United States)

    Daley, Daniel O; Skoglund, Ulf; Söderström, Bill

    2016-09-09

    The source of constriction required for division of a bacterial cell remains enigmatic. FtsZ is widely believed to be a key player, because in vitro experiments indicate that it can deform liposomes when membrane tethered. However in vivo evidence for such a role has remained elusive as it has been challenging to distinguish the contribution of FtsZ from that of peptidoglycan-ingrowth. To differentiate between these two possibilities we studied the early stages of division in Escherichia coli, when FtsZ is present at the division site but peptidoglycan synthesizing enzymes such as FtsI and FtsN are not. Our approach was to use correlative cryo-fluorescence and cryo-electron microscopy (cryo-CLEM) to monitor the localization of fluorescently labeled FtsZ, FtsI or FtsN correlated with the septal ultra-structural geometry in the same cell. We noted that the presence of FtsZ at the division septum is not sufficient to deform membranes. This observation suggests that, although FtsZ can provide a constrictive force, the force is not substantial at the onset of division. Conversely, the presence of FtsN always correlated with membrane invagination, indicating that allosteric activation of peptidoglycan ingrowth is the trigger for constriction of the cell envelope during cell division in E. coli.

  14. Scientific and Technical Information Output of the Langley Research Center, for calendar year 1976

    Science.gov (United States)

    1976-01-01

    Documents listed include NASA Technical Reports, Technical Notes, Technical Memorandums, Special Publications, Contractor Reports, journal articles, and technical presentations made at Society meetings. NASA formal reports listed are those that were mailed and distributed to the ultimate user. The material presented here is listed first by Division and then under the following headings: (a) Formal Reports, (b) Contractor Reports, (c) Articles and Meeting Presentations, and (d) High Number Technical Memorandums (High TMX's). Under each heading, the material cited authors in alphabetical order. If a report has more than one author and these authors are from different Divisions, the report is listed only once, under the senior author's name.

  15. Theoretical Division progress report. [October 1976-January 1979

    Energy Technology Data Exchange (ETDEWEB)

    Cooper, N.G. (comp.)

    1979-04-01

    This report presents highlights of activities in the Theoretical (T) Division from October 1976-January 1979. The report is divided into three parts. Part I presents an overview of the Division: its unique function at the Los Alamos Scientific Laboratory (LASL) and within the scientific community as a whole; the organization of personnel; the main areas of research; and a survey of recent T-Division initiatives. This overview is followed by a survey of the 13 groups within the Division, their main responsibilities, interests, and expertise, consulting activities, and recent scientific accomplisments. The remainder of the report, Parts II and III, is devoted to articles on selected research activities. Recent efforts on topics of immediate interest to energy and weapons programs at LASL and elsewhere are described in Part II, Major National Programs. Separate articles present T-Divison contributions to weapons research, reactor safety and reactor physics research, fusion research, laser isotope separation, and other energy research. Each article is a compilation of independent projects within T Division, all related to but addressing different aspects of the major program. Part III is organized by subject discipline, and describes recent scientific advances of fundamental interest. An introduction, defining the scope and general nature of T-Division efforts within a given discipline, is followed by articles on the research topics selected. The reporting is done by the scientists involved in the research, and an attempt is made to communicate to a general audience. Some data are given incidentally; more technical presentations of the research accomplished may be found among the 47 pages of references. 110 figures, 5 tables.

  16. Intracrystalline deformation of calcite

    NARCIS (Netherlands)

    de Bresser, Hans

    1991-01-01

    It is well established from observations on natural calcite tectonites that intracrystalline plastic mechanisms are important during the deformation of calcite rocks in nature. In this thesis, new data are presented on fundamental aspects of deformation behaviour of calcite under conditions where 'd

  17. Resurgent deformation quantisation

    Energy Technology Data Exchange (ETDEWEB)

    Garay, Mauricio, E-mail: garay91@gmail.com [Institut für Mathematik, FB 08 Physik, Mathematik und Informatik, Johannes Gutenberg-Universität, 55099 Mainz (Germany); Goursac, Axel de, E-mail: Axelmg@melix.net [Chargé de Recherche au F.R.S.-FNRS, IRMP, Université Catholique de Louvain, Chemin du Cyclotron, 2, B-1348 Louvain-la-Neuve (Belgium); Straten, Duco van, E-mail: straten@mathematik.uni-mainz.de [Institut für Mathematik, FB 08 Physik, Mathematik und Informatik, Johannes Gutenberg-Universität, 55099 Mainz (Germany)

    2014-03-15

    We construct a version of the complex Heisenberg algebra based on the idea of endless analytic continuation. The algebra would be large enough to capture quantum effects that escape ordinary formal deformation quantisation. -- Highlights: •We construct resurgent deformation quantisation. •We give integral formulæ. •We compute examples which show that hypergeometric functions appear naturally in quantum computations.

  18. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball

    2010-01-01

    Operational Experience At the end of the first full-year running period of LHC, CMS is established as a reliable, robust and mature experiment. In particular common systems and infrastructure faults accounted for <0.6 % CMS downtime during LHC pp physics. Technical operation throughout the entire year was rather smooth, the main faults requiring UXC access being sub-detector power systems and rack-cooling turbines. All such problems were corrected during scheduled technical stops, in the shadow of tunnel access needed by the LHC, or in negotiated accesses or access extensions. Nevertheless, the number of necessary accesses to the UXC averaged more than one per week and the technical stops were inevitably packed with work packages, typically 30 being executed within a few days, placing a high load on the coordination and area management teams. It is an appropriate moment for CMS Technical Coordination to thank all those in many CERN departments and in the Collaboration, who were involved in CMS techni...

  19. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball

    2010-01-01

    Operational Experience Since the closure of the detector in February, the technical operation of CMS has been quite smooth and reliable. Some minor interventions in UXC were required to cure failures of power supplies, fans, readout boards and rack cooling connections, but all these failures were repaired in scheduled technical stops or parasitically during access dedicated to fixing LHC technical problems. The only occasion when CMS had to request an access between fills was to search for the source of an alarm from the leak-detection cables mounted in the DT racks. After a few minutes of diagnostic search, a leaking air-purge was found. Replacement was complete within 2 hours. This incident demonstrated once more the value of these leak detection cables; the system will be further extended (during the end of year technical stop) to cover more racks in UXC and the floor beneath the detector. The magnet has also been operating reliably and reacted correctly to the 14s power cut on 29 May (see below). In or...

  20. Technical Training: Technical Training Seminar

    CERN Multimedia

    2004-01-01

    TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Monday 9 February 2004 From 10:00 to 12:00 - IT Auditorium - bldg. 31, 3rd floor ANSOFT High-Frequency Seminar David Prestaux, Application Engineer, ANSOFT F-78535 BUC, France This Technical Training seminar will present two Ansoft application products: Ansoft HFSS and Ansoft Designer. Ansoft HFSS makes use of the Finite Element Method (FEM) to calculate field solutions from first principles. It can accurately predict all high-frequency behaviours such as dispersion, mode conversion, and losses due to materials and radiation. Ansoft Designer is a suite of design tools to fully integrate high-frequency, physics-based electromagnetic simulations into a seamless system-level simulation environment. Ansoft Designer uses a simple interface to give complete control over every design task, by a method allowing multiple solvers, Solver on Demand. • Introduction • Overview of the Ansoft Total solution • Ansoft HFSS 9...

  1. Deformations of Superconformal Theories

    CERN Document Server

    Cordova, Clay; Intriligator, Kenneth

    2016-01-01

    We classify possible supersymmetry-preserving relevant, marginal, and irrelevant deformations of unitary superconformal theories in $d \\geq 3$ dimensions. Our method only relies on symmetries and unitarity. Hence, the results are model independent and do not require a Lagrangian description. Two unifying themes emerge: first, many theories admit deformations that reside in multiplets together with conserved currents. Such deformations can lead to modifications of the supersymmetry algebra by central and non-central charges. Second, many theories with a sufficient amount of supersymmetry do not admit relevant or marginal deformations, and some admit neither. The classification is complicated by the fact that short superconformal multiplets display a rich variety of sporadic phenomena, including supersymmetric deformations that reside in the middle of a multiplet. We illustrate our results with examples in diverse dimensions. In particular, we explain how the classification of irrelevant supersymmetric deformat...

  2. Massey products and deformations

    CERN Document Server

    Fuchs, D; Fuchs, Dmitry; Lang, Lynelle

    1996-01-01

    The classical deformation theory of Lie algebras involves different kinds of Massey products of cohomology classes. Even the condition of extendibility of an infinitesimal deformation to a formal one-parameter deformation of a Lie algebra involves Massey powers of two dimensional cohomology classes which are not powers in the usual definition of Massey products in the cohomology of a differential graded Lie algebra. In the case of deformations with other local bases, one deals with other, more specific Massey products. In the present work a construction of generalized Massey products is given, depending on an arbitrary graded commutative, associative algebra. In terms of these products, the above condition of extendibility is generalized to deformations with arbitrary local bases. Dually, a construction of generalized Massey products on the cohomology of a differential graded commutative associative algebra depends on a nilpotent graded Lie algebra. For example, the classical Massey products correspond to the...

  3. Deformation mechanisms in experimentally deformed Boom Clay

    Science.gov (United States)

    Desbois, Guillaume; Schuck, Bernhard; Urai, Janos

    2016-04-01

    Bulk mechanical and transport properties of reference claystones for deep disposal of radioactive waste have been investigated since many years but little is known about microscale deformation mechanisms because accessing the relevant microstructure in these soft, very fine-grained, low permeable and low porous materials remains difficult. Recent development of ion beam polishing methods to prepare high quality damage free surfaces for scanning electron microscope (SEM) is opening new fields of microstructural investigation in claystones towards a better understanding of the deformation behavior transitional between rocks and soils. We present results of Boom Clay deformed in a triaxial cell in a consolidated - undrained test at a confining pressure of 0.375 MPa (i.e. close to natural value), with σ1 perpendicular to the bedding. Experiments stopped at 20 % strain. As a first approximation, the plasticity of the sample can be described by a Mohr-Coulomb type failure envelope with a coefficient of cohesion C = 0.117 MPa and an internal friction angle ϕ = 18.7°. After deformation test, the bulk sample shows a shear zone at an angle of about 35° from the vertical with an offset of about 5 mm. We used the "Lamipeel" method that allows producing a permanent absolutely plane and large size etched micro relief-replica in order to localize and to document the shear zone at the scale of the deformed core. High-resolution imaging of microstructures was mostly done by using the BIB-SEM method on key-regions identified after the "Lamipeel" method. Detailed BIB-SEM investigations of shear zones show the following: the boundaries between the shear zone and the host rock are sharp, clay aggregates and clastic grains are strongly reoriented parallel to the shear direction, and the porosity is significantly reduced in the shear zone and the grain size is smaller in the shear zone than in the host rock but there is no evidence for broken grains. Comparison of microstructures

  4. Physics division. Progress report for period ending September 30, 1996

    Energy Technology Data Exchange (ETDEWEB)

    Ball, S.J. [ed.

    1997-04-01

    This report covers the research and development activities of the Physics Division for the 1995 and 1996 fiscal years, beginning October 1, 1994, and ending September 30, 1996. The activities of the Division continue to be concentrated in the areas of experimental nuclear physics, experimental atomic physics, and theoretical nuclear and atomic physics. In addition, there are smaller programs in plasma diagnostics and data compilation and evaluation. During the period of this report, there has been considerable success in bringing the Holifield Radioactive Ion Beam Facility (HRIBF) into routine operation. The budgets of the nuclear physics portion of the Division have increased each year in nearly all areas, and several new members have been added to the Division research and development staff. On August 30, 1996, the HRIBF successfully accelerated its first radioactive ion beams, {sup 69}As and {sup 70}As. Prior to this, the heart of the facility, the RIB injector system, was completed, including installation of a remote handling system for the target/ion source assembly. Target and ion source development is likely to be the technical key to success of the HRIBF. We have expanded our efforts in those development areas. Of special note is the development of highly permeable composite targets which have now been shown to allow release of difficult-to-produce radioactive ions such as {sup 17,18}F. A summary of the HRIBF work is provided in Chapter 1, along with supporting activities of the Joint Institute for Heavy Ion Research.

  5. Home | Division of Cancer Prevention

    Science.gov (United States)

    Our Research The Division of Cancer Prevention (DCP) conducts and supports research to determine a person's risk of cancer and to find ways to reduce the risk. This knowledge is critical to making progress against cancer because risk varies over the lifespan as genetic and epigenetic changes can transform healthy tissue into cancer. |

  6. Environmental Transport Division: 1979 report

    Energy Technology Data Exchange (ETDEWEB)

    Murphy, C.E. Jr.; Schubert, J.F.; Bowman, W.W.; Adams, S.E.

    1980-03-01

    During 1979, the Environmental Transport Division (ETD) of the Savannah River Laboratory conducted atmospheric, terrestrial, aquatic, and marine studies, which are described in a series of articles. Separate abstracts were prepared for each. Publications written about the 1979 research are listed at the end of the report.

  7. 78 FR 17430 - Antitrust Division

    Science.gov (United States)

    2013-03-21

    ... pursuant to Section 6(b) of the Act on April 4, 2003 (68 FR 16552). The last notification was filed with... Section 6(b) of the Act on March 23, 2012 (77 FR 17095). Patricia A. Brink, Director of Civil Enforcement... Antitrust Division Notice Pursuant to the National Cooperative Research and Production Act of...

  8. Operational Characterization of Divisibility of Dynamical Maps

    Science.gov (United States)

    Bae, Joonwoo; Chruściński, Dariusz

    2016-07-01

    In this work, we show the operational characterization to the divisibility of dynamical maps in terms of the distinguishability of quantum channels. It is proven that the distinguishability of any pair of quantum channels does not increase under divisible maps, in which the full hierarchy of divisibility is isomorphic to the structure of entanglement between system and environment. This shows that (i) channel distinguishability is the operational quantity signifying (detecting) divisibility (indivisibility) of dynamical maps and (ii) the decision problem for the divisibility of maps is as hard as the separability problem in entanglement theory. We also provide the information-theoretic characterization to the divisibility of maps with conditional min-entropy.

  9. The Spherical Deformation Model

    DEFF Research Database (Denmark)

    Hobolth, Asgar

    2003-01-01

    Miller et al. (1994) describe a model for representing spatial objects with no obvious landmarks. Each object is represented by a global translation and a normal deformation of a sphere. The normal deformation is defined via the orthonormal spherical-harmonic basis. In this paper we analyse...... the spherical deformation model in detail and describe how it may be used to summarize the shape of star-shaped three-dimensional objects with few parameters. It is of interest to make statistical inference about the three-dimensional shape parameters from continuous observations of the surface and from...

  10. Calcaneo-valgus deformity.

    Science.gov (United States)

    Evans, D

    1975-08-01

    A discussion of the essential deformity in calcaneo-valgus feet develops a theme originally put forward in 1961 on the relapsed club foot (Evans 1961). Whereas in the normal foot the medial and lateral columns are about equal in length, in talipes equino-varus the lateral column is longer and in calcaneo-valgus shorter than the medial column. The suggestion is that in the treatment of both deformities the length of the columns be made equal. A method is described of treating calcaneo-valgus deformity by inserting cortical bone grafts taken from the tibia to elongate the anterior end of the calcaneus.

  11. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball and W. Zeuner

    2011-01-01

    In this report we will review the main achievements of the Technical Stop and the progress of several centrally-managed projects to support CMS operation and maintenance and prepare the way for upgrades. Overview of the extended Technical Stop  The principal objectives of the extended Technical Stop affecting the detector itself were the installation of the TOTEM T1 telescopes on both ends, the readjustment of the alignment link-disk in YE-2, the replacement of the light-guide sleeves for all PMs of both HFs, and some repairs on TOTEM T2 and CASTOR. The most significant tasks were, however, concentrated on the supporting infrastructure. A detailed line-by-line leak search was performed in the C6F14 cooling system of the Tracker, followed by the installation of variable-frequency drives on the pump motors of the SS1 and SS2 tracker cooling plants to reduce pressure transients during start-up. In the electrical system, larger harmonic filters were installed in ...

  12. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball

    Overview From a technical perspective, CMS has been in “beam operation” state since 6th November. The detector is fully closed with all components operational and the magnetic field is normally at the nominal 3.8T. The UXC cavern is normally closed with the radiation veto set. Access to UXC is now only possible during downtimes of LHC. Such accesses must be carefully planned, documented and carried out in agreement with CMS Technical Coordination, Experimental Area Management, LHC programme coordination and the CCC. Material flow in and out of UXC is now strictly controlled. Access to USC remains possible at any time, although, for safety reasons, it is necessary to register with the shift crew in the control room before going down.It is obligatory for all material leaving UXC to pass through the underground buffer zone for RP scanning, database entry and appropriate labeling for traceability. Technical coordination (notably Stephane Bally and Christoph Schaefer), the shift crew and run ...

  13. Extremely deformable structures

    CERN Document Server

    2015-01-01

    Recently, a new research stimulus has derived from the observation that soft structures, such as biological systems, but also rubber and gel, may work in a post critical regime, where elastic elements are subject to extreme deformations, though still exhibiting excellent mechanical performances. This is the realm of ‘extreme mechanics’, to which this book is addressed. The possibility of exploiting highly deformable structures opens new and unexpected technological possibilities. In particular, the challenge is the design of deformable and bi-stable mechanisms which can reach superior mechanical performances and can have a strong impact on several high-tech applications, including stretchable electronics, nanotube serpentines, deployable structures for aerospace engineering, cable deployment in the ocean, but also sensors and flexible actuators and vibration absorbers. Readers are introduced to a variety of interrelated topics involving the mechanics of extremely deformable structures, with emphasis on ...

  14. Physiographic divisions of the conterminous U. S.

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This is a polygon coverage of Physiographic Divisions in the conterminous United States. It was automated from Fenneman's 1:7,000,000-scale map, "Physical Divisions...

  15. Energy Division annual progress report for period ending September 30, 1991

    Energy Technology Data Exchange (ETDEWEB)

    Stone, J.N. [ed.

    1992-04-01

    The Energy Division is one of 17 research divisions at Oak Ridge Laboratory. Its goals and accomplishments are described in this annual progress report for FY 1991. The division`s total expenditures in FY 1991 were $39.1 million. The work is supported by the US Department of Energy, US Department of Defense, many other federal agencies, and some private organizations. Disciplines of the 124 technical staff members include engineering, social sciences, physical and life sciences, and mathematics and statistics. The Energy Division`s programmatic activities focus on three major areas: (1) analysis and assessment, (2) energy conservation technologies, and (3) military transportation systems. Analysis and assessment activities cover energy and resource analysis, the preparation of environmental assessments and impact statements, research on waste management, analysis of emergency preparedness for natural and technological disasters, analysis of the energy and environmental needs of developing countries, technology transfer, and analysis of civilian transportation. Energy conservation technologies include electric power systems, building equipment (thermally activated heat pumps, advanced refrigeration systems, novel cycles), building envelopes (walls, foundations, roofs, attics, and materials), and technical issues for improving energy efficiency in existing buildings. Military transportation systems concentrate on research for sponsors within the US military on improving the efficiency of military deployment, scheduling, and transportation coordination.

  16. Environmental Sciences Division annual progress report for period ending September 30, 1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-04-01

    This progress report summarizes the research and development activities conducted in the Environmental Sciences Division of Oak Ridge National Laboratory during the period October 1, 1990, through September 30, 1991. The report is structured to provide descriptions of current activities and accomplishments in each of the division's major organizational units. Following the sections describing the organizational units is a section devoted to lists of information necessary to convey the scope of the work in the division. The Environmental Sciences Division (ESD) at Oak Ridge National Laboratory (ORNL) conducts environmental research and analyses associated with both energy technology development and the interactions between people and the environment. The division engages in basic and applied research for a diverse list of sponsors. While the US Department of Energy (DOE) is the primary sponsor ESD staff also perform research for other federal agencies, state agencies, and private industry. The division works collaboratively with federal agencies, universities, and private organizations in achieving its research objectives and hosts a large number of visiting investigators from these organizations. Given the diverse interdisciplinary specialization of its staff, ESD provides technical expertise on complex environmental problems and renders technical leadership for major environmental issues of national and local concern. This progress report highlights many of ESD's accomplishment in these and other areas in FY 1991.

  17. Deformations of singularities

    CERN Document Server

    Stevens, Jan

    2003-01-01

    These notes deal with deformation theory of complex analytic singularities and related objects. The first part treats general theory. The central notion is that of versal deformation in several variants. The theory is developed both in an abstract way and in a concrete way suitable for computations. The second part deals with more specific problems, specially on curves and surfaces. Smoothings of singularities are the main concern. Examples are spread throughout the text.

  18. Diffeomorphic Statistical Deformation Models

    DEFF Research Database (Denmark)

    Hansen, Michael Sass; Hansen, Mads/Fogtman; Larsen, Rasmus

    2007-01-01

    In this paper we present a new method for constructing diffeomorphic statistical deformation models in arbitrary dimensional images with a nonlinear generative model and a linear parameter space. Our deformation model is a modified version of the diffeomorphic model introduced by Cootes et al. Th...... with ground truth in form of manual expert annotations, and compared to Cootes's model. We anticipate applications in unconstrained diffeomorphic synthesis of images, e.g. for tracking, segmentation, registration or classification purposes....

  19. Deformation in nanocrystalline metals

    OpenAIRE

    Helena Van Swygenhoven; Julia R. Weertman

    2006-01-01

    It is now possible to synthesize polycrystalline metals made up of grains that average less than 100 nm in size. Such nanocrystalline metals contain a significant volume fraction of interfacial regions separated by nearly perfect crystals. The small sizes involved limit the conventional operation of dislocation sources and thus a fundamental question arises: how do these materials deform plastically? We review the current views on deformation mechanisms in nanocrystalline, face-centered cubic...

  20. Health, Safety, and Environment Division

    Energy Technology Data Exchange (ETDEWEB)

    Wade, C [comp.

    1992-01-01

    The primary responsibility of the Health, Safety, and Environmental (HSE) Division at the Los Alamos National Laboratory is to provide comprehensive occupational health and safety programs, waste processing, and environmental protection. These activities are designed to protect the worker, the public, and the environment. Meeting these responsibilities requires expertise in many disciplines, including radiation protection, industrial hygiene, safety, occupational medicine, environmental science and engineering, analytical chemistry, epidemiology, and waste management. New and challenging health, safety, and environmental problems occasionally arise from the diverse research and development work of the Laboratory, and research programs in HSE Division often stem from these applied needs. These programs continue but are also extended, as needed, to study specific problems for the Department of Energy. The results of these programs help develop better practices in occupational health and safety, radiation protection, and environmental science.

  1. Cell division in apicomplexan parasites.

    Science.gov (United States)

    Francia, Maria E; Striepen, Boris

    2014-02-01

    Toxoplasma gondii and Plasmodium falciparum are important human pathogens. These parasites and many of their apicomplexan relatives undergo a complex developmental process in the cells of their hosts, which includes genome replication, cell division and the assembly of new invasive stages. Apicomplexan cell cycle progression is both globally and locally regulated. Global regulation is carried out throughout the cytoplasm by diffusible factors that include cell cycle-specific kinases, cyclins and transcription factors. Local regulation acts on individual nuclei and daughter cells that are developing inside the mother cell. We propose that the centrosome is a master regulator that physically tethers cellular components and that provides spatial and temporal control of apicomplexan cell division.

  2. Advanced Reactor Safety Research Division. Quarterly progress report, January 1-March 31, 1980

    Energy Technology Data Exchange (ETDEWEB)

    Agrawal, A.K.; Cerbone, R.J.; Sastre, C.

    1980-06-01

    The Advanced Reactor Safety Research Programs quarterly progress report describes current activities and technical progress in the programs at Brookhaven National Laboratory sponsored by the USNRC Division of Reactor Safety Research. The projects reported each quarter are the following: HTGR Safety Evaluation, SSC Code Development, LMFBR Safety Experiments, and Fast Reactor Safety Code Validation.

  3. Label-free quantitative cell division monitoring of endothelial cells by digital holographic microscopy

    Science.gov (United States)

    Kemper, Björn; Bauwens, Andreas; Vollmer, Angelika; Ketelhut, Steffi; Langehanenberg, Patrik; Müthing, Johannes; Karch, Helge; von Bally, Gert

    2010-05-01

    Digital holographic microscopy (DHM) enables quantitative multifocus phase contrast imaging for nondestructive technical inspection and live cell analysis. Time-lapse investigations on human brain microvascular endothelial cells demonstrate the use of DHM for label-free dynamic quantitative monitoring of cell division of mother cells into daughter cells. Cytokinetic DHM analysis provides future applications in toxicology and cancer research.

  4. Physics Division annual progress report for period ending June 30, 1977. [ORNL

    Energy Technology Data Exchange (ETDEWEB)

    Stelson, P.H.

    1977-09-01

    The bulk of the Division's effort concerned nuclear physics and accelerator development, but work in the areas of nuclear data, research applicable to the magnetic fusion project, atomic and molecular physics, and high-energy physics is also recounted. Lists of publications, technical talks, personnel, etc., are included. Individual reports with sufficient data are abstracted separately. (RWR)

  5. Advanced Reactor Safety Research Division. Quarterly progress report, April 1-June 30, 1980

    Energy Technology Data Exchange (ETDEWEB)

    Romano, A.J.

    1980-01-01

    The Advanced Reactor Safety Research Programs Quarterly Progress Report describes current activities and technical progress in the programs at Brookhaven National Laboratory sponsored by the USNRC Division of Reactor Safety Research. The projects reported each quarter are the following: HTGR safety evaluation, SSC Code Development, LMFBR Safety Experiments, and Fast Reactor Safety Code Validation.

  6. Energy and Environmental Systems Division's publications publications 1968-1982

    Energy Technology Data Exchange (ETDEWEB)

    None

    1982-03-01

    Books, journal articles, conference papers, and technical reports produced by the Energy and Environmental Systems Division of Argonne National Laboratory are listed in this bibliography. Subjects covered are energy resources (recovery and use); energy-efficient technology; electric utilities, and environments. (MCW)

  7. Water Reactor Safety Research Division. Quarterly progress report, April 1-June 30, 1980

    Energy Technology Data Exchange (ETDEWEB)

    Abuaf, N.; Levine, M.M.; Saha, P.; van Rooyen, D.

    1980-08-01

    The Water Reactor Safety Research Programs quarterly report describes current activities and technical progress in the programs at Brookhaven National Laboratory sponsored by the USNRC Division of Reactor Safety Research. The projects reported each quarter are the following: LWR Thermal Hydraulic Development, Advanced Code Evlauation, TRAC Code Assessment, and Stress Corrosion Cracking of PWR Steam Generator Tubing.

  8. Annotated Bibliography of the Personnel Research Division Reports (1973-1975).

    Science.gov (United States)

    Magness, P. J., Ed.

    An annotated bibliography of 60 technical reports and publications on research conducted by the Personnel Research Division of the Air Force Human Resources Laboratory (AFHRL) is presented. Research covers the identification and measurement of individual aptitude, motivation, morale, attitude, and environment factors. Keyword and personal author…

  9. Technical Training: Technical Training Seminar

    CERN Multimedia

    2004-01-01

    Tuesday 30 March TECHNICAL TRAINING SEMINAR From 9:00 to 12:00 and from 13:00 to 16:00 hrs - Council Chamber, Salle B, Salle des Pas Perdus National Instruments (NI) on Tour 2004 Claudia Jüngel, Evrem Yarkin, Joel Clerc, Hervé Baour / NATIONAL INSTRUMENTS The special event NI on Tour 2004, run in Germany, Austria and Switzerland, will be at CERN on March 30. Technical seminars and free introductory courses will be offered all day long in the Council Chamber, Salle B, and Salle des Pas Perdus (buildings 61 and 503). Technical conferences: 09:00 - 12:00 Data acquisition systems on PCs. Industrial measurement and control techniques. 13:00 - 16:00 Advanced LabVIEW software and PXI instrumentation. Measuring instruments and system components for teststand automation. Introductory courses: 09:00 - 12:00 DIAdem: Data analysis and presentation 13:00 - 16:00 Data acquisition with LabVIEW Language: English and French Free special seminar. Registration is recommended with National Instruments Swi...

  10. Technical Training: Technical Training Seminar

    CERN Multimedia

    2004-01-01

    Tuesday 30 March TECHNICAL TRAINING SEMINAR From 9:00 to 12:00 and from 13:00 to 16:00 hrs - Council Chamber, Salle B, Salle des Pas Perdus National Instruments (NI) on Tour 2004 Claudia Jüngel, Evrem Yarkin, Joel Clerc, Hervé Baour / NATIONAL INSTRUMENTS The special event NI on Tour 2004, run in Germany, Austria and Switzerland, will be at CERN on March 30. Technical seminars and free introductory courses will be offered all day long in the Council Chamber, Salle B, and Salle des Pas Perdus (buildings 61 and 503). Technical conferences: 09:00 - 12:00 Data acquisition systems on PCs. Industrial measurement and control techniques. 13:00 - 16:00 Advanced LabVIEW software and PXI instrumentation. Measuring instruments and system components for teststand automation. Introductory courses: 09:00 - 12:00 DIAdem: Data analysis and presentation 13:00 - 16:00 Data acquisition with LabVIEW Language: English and French Free special seminar. Registration is recommended with National Instruments Switzerland (please sp...

  11. Physics Division annual report, April 1, 1995--March 31, 1996

    Energy Technology Data Exchange (ETDEWEB)

    Thayer, K.J. [ed.

    1996-11-01

    The past year has seen several major advances in the Division`s research programs. In heavy-ion physics these include experiments with radioactive beams of interest to nuclear astrophysics, a first exploration of the structure of nuclei situated beyond the proton drip line, the discovery of new proton emitters--the heaviest known, the first unambiguous detection of discrete linking transitions between superdeformed and normal deformed states, and the impact of the APEX results which were the first to report, conclusively, no sign of the previously reported sharp electron positron sum lines. The medium energy nuclear physics program of the Division has led the first round of experiments at the CEBAF accelerator at the Thomas Jefferson National Accelerator Facility and the study of color transparency in rho meson propagation at the HERMES experiment at DESY, and it has established nuclear polarization in a laser driven polarized hydrogen target. In atomic physics, the non-dipolar contribution to photoionization has been quantitatively established for the first time, the atomic physics beamline at the Argonne 7 GeV Advanced Photon Source was constructed and, by now, first experiments have been successfully performed. The theory program has pushed exact many-body calculations with fully realistic interactions (the Argonne v{sub 18} potential) to the seven-nucleon system, and interesting results have been obtained for the structure of deformed nuclei through meanfield calculations and for the structure of baryons with QCD calculations based on the Dyson-Schwinger approach. Brief summaries are given of the individual research programs.

  12. Luis de Florez and the Special Devices Division

    Science.gov (United States)

    Dawson, Paul Louis

    This Dissertation presents the life of Luis de Florez and the World War II history of the Special Devices Division (SDD) of the U.S. Navy's Bureau of Aeronautics. Luis de Florez was a well known consulting engineer, aviation fuel expert, private pilot and reserve Naval officer. While on active duty in 1940, he received the assignment to improve the Navy's flight training methods. To accomplish this objective, he promoted the concept of synthetic training, the use of simulators and other non-operational equipment, to provide training for Navy flight personnel such as pilots, gunners, navigators, flight engineers, radio operators and others as well as for ground based people like mechanics. He founded the Special Devices Division to design the tools and equipment needed for this type of training. The success of synthetic training and the devices developed by the SDD received recognition by the awarding of the Collier Trophy to de Florez in December 1944. This trophy is awarded annually for the most significant aeronautical achievement of the previous year (1943). De Florez received the award for the strategic accomplishment of training thousands of American airmen in 1943. The work of the Division also had other important technical, social, financial and operational impacts on the prosecution of WW II by the Allies. The work of the Division also had impacts on American society as a whole that persist to the present day. These impacts are discussed in detail. The Dissertation presents details of the devices and their use in aviation training as well as a history of the Division during the war. After the war, de Florez led an advisory board for the CIA. These activities and some of both the positive and negative results of the work of this board are discussed. This discussion includes de Florez' involvement in the CIA's drug experiments and the unfortunate Frank Olsen affair.

  13. Division of household tasks and financial management

    NARCIS (Netherlands)

    Antonides, G.

    2011-01-01

    Both the standard economic model and bargaining theory make predictions about financial management and the division of household labor between household partners. Using a large Internet survey, we have tested several predictions about task divisions reported by Dutch household partners. The division

  14. Prokaryotic cell division: flexible and diverse

    NARCIS (Netherlands)

    den Blaauwen, T.

    2013-01-01

    Gram-negative rod-shaped bacteria have different approaches to position the cell division initiating Z-ring at the correct moment in their cell division cycle. The subsequent maturation into a functional division machine occurs in vastly different species in two steps with appreciable time in

  15. Algebraic divisibility sequences over function fields

    CERN Document Server

    Ingram, Patrick; Silverman, Joseph H; Stange, Katherine E; Streng, Marco

    2011-01-01

    We study the existence of primes and of primitive divisors in classical divisibility sequences defined over function fields. Under various hypotheses, we prove that Lucas sequences and elliptic divisibility sequences over function fields defined over number fields contain infinitely many irreducible elements. We also prove that an elliptic divisibility sequence over a function field has only finitely many terms lacking a primitive divisor.

  16. Take a Bite out of Fraction Division

    Science.gov (United States)

    Cengiz, Nesrin; Rathouz, Margaret

    2011-01-01

    Division of fractions is often considered the most mechanical and least understood topic in elementary school. Enacting fraction division tasks in meaningful ways requires that teachers know not only "how" fraction division works but also "why" it works. The authors have created materials to help preservice teachers develop that knowledge. To…

  17. 77 FR 40586 - Coastal Programs Division

    Science.gov (United States)

    2012-07-10

    ... request for comments in the Federal Register at 77 FR 12245 on the request of Lockheed Martin Corp. to... National Oceanic and Atmospheric Administration Coastal Programs Division AGENCY: Coastal Programs Division... licenses. FOR FURTHER INFORMATION CONTACT: Kerry Kehoe, Coastal Programs Division (NORM/3), Office of...

  18. 7 CFR 29.16 - Division.

    Science.gov (United States)

    2010-01-01

    ... INSPECTION Regulations Definitions § 29.16 Division. Tobacco Division, Agricultural Marketing Service, U.S... 7 Agriculture 2 2010-01-01 2010-01-01 false Division. 29.16 Section 29.16 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections,...

  19. Reactor2D: A tool for simulation of shock deformation

    Science.gov (United States)

    Kraus, Eugeny I.; Shabalin, Ivan I.

    2016-10-01

    The basic steps for creating a numerical tool to simulate the deformation and failure processes of complex technical objects (CTO) are presented. Calculations of shock loading of CTO both at low and high speeds, showing the efficiency of the numerical tools created are carried out.

  20. Foliations in deformation spaces of local G-shtukas

    CERN Document Server

    Hartl, Urs

    2010-01-01

    We study local G-shtukas with level structure over a base scheme whose Newton polygons are constant on the base. We show that after a finite base change and after passing to an \\'etale covering, such a local G-shtuka is isogenous to a completely slope divisible one, generalizing corresponding results for p-divisible groups by Oort and Zink. As an application we establish a product structure up to finite morphism on the closed Newton stratum of the universal deformation of a local G-shtuka, similarly to Oort's foliations for p-divisible groups and abelian varieties. This also yields bounds on the dimensions of affine Deligne-Lusztig varieties and proves equidimensionality of affine Deligne-Lusztig varieties in the affine Grassmannian.

  1. Reports on crustal movements and deformations. [bibliography

    Science.gov (United States)

    Cohen, S. C.; Peck, T.

    1983-01-01

    This Catalog of Reports on Crustal Movements and Deformation is a structured bibliography of scientific papers on the movements of the Earth crust. The catalog summarizes by various subjects papers containing data on the movement of the Earth's surface due to tectonic processes. In preparing the catalog we have included studies of tectonic plate motions, spreading and convergence, microplate rotation, regional crustal deformation strain accumulation and deformations associated with the earthquake cycle, and fault motion. We have also included several papers dealing with models of tectonic plate motion and with crustal stress. Papers which discuss tectonic and geologic history but which do not present rates of movements or deformations and papers which are primarily theoretical analyses have been excluded from the catalog. An index of authors cross-referenced to their publications also appears in the catalog. The catalog covers articles appearing in reviewed technical journals during the years 1970-1981. Although there are citations from about twenty journals most of the items come from the following publications: Journal of Geophysical Research, Tectonophysics, Geological Society of America Bulletin of the Seismological Society of America, Nature, Science, Geophysical Journal of the Royal Astronomical Society, Earth and Planetary Science Letters, and Geology.

  2. A dynamic new group within Human Resources Division

    CERN Multimedia

    2003-01-01

    Since 1st May CERN's training and development and personnel management teams have been fused into a new group called Personnel Management and Development. The new Personnel Management and Development Group is responsible for career advancement and management, recruitment, remuneration and for language, communication, management, academic and technical training, keys to a sense of greater well-being and to career progression. The new group was born on 1st May out of the fusion of the "Personnel Management" and "Training and Development" Groups within CERN's Human Resources Division. Its aim is to offer a practical and easily accessible service to assist the members of the personnel and supervisors to manage careers more harmoniously, to make progress and to continue to learn on the job. With Sue Foffano as its Group Leader, the Group comprises four sections: Academic and Technical Training under the guiding hand of Mick Storr; Management, Communication and Language Training headed by Sudeshna Datta-Cockeril...

  3. 75 FR 16843 - Core Manufacturing, Multi-Plastics, Inc., Division, Sipco, Inc., Division, Including Leased...

    Science.gov (United States)

    2010-04-02

    ... Employment and Training Administration Core Manufacturing, Multi-Plastics, Inc., Division, Sipco, Inc..., 2009, applicable to workers of Core Manufacturing, Multi-Plastics, Inc., Division and Sipco, Inc... of Core Manufacturing, Multi-Plastics, Inc., Division and Sipco, Inc., Division, including...

  4. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball and W. Zeuner

    2011-01-01

      Operational experience 2011 CMS is approaching the end of a very successful year of operation. Proton- proton running ended in the late afternoon of 30th October with a stunning 5.73 fb–1 delivered by LHC, of which CMS recorded 5.22 fb–1. During heavy-ion operation, which continues until 7th December, both the accelerator and the CMS detector have also performed very well. Despite the encouraging overall reliability of technical operation, several infrastructure failures which occurred since the last Bulletin are worthy of mention, with one leading for the first time to significant data-loss. On 10th July, a CERN-wide power failure brought down essentially all services including the magnet, due to an MCS setting being left in “manual” after the recent technical stop, but there was no significant damage and the detector was operational before the LHC, despite a slow and tortuous recovery (one of several indications this year that there is room for improve...

  5. TECHNICAL COORDINATION

    CERN Multimedia

    Austin Ball

    Summary of progress since last CMS week. Ten years of construction work have been completed. CMS is closed, in very close to the ideal low luminosity configuration, and performed well in the first tests with LHC beam. Behind this encouraging news is the story of a summer of intense commitment by many teams (from the collaboration and 3 CERN departments) working together, against the clock and despite many minor setbacks, to ensure that the experiment was ready to play a leading role in the excitement of September 10. Following beampipe bakeout and refill with pure neon, a magnificent effort by the ECAL group and the pt 5 technical crew made it possible to install and commission all 4 ECAL endcap Dees before the end of August. In the shadow of this activity, the barrel and forward pixel trackers and part of the beam monitoring were installed within the vac tank. The pt 5 technical teams then succeeded in safely removing the 20t installation tables and their support blocks from beneath the already installed ...

  6. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball and W. Zeuner

    2013-01-01

    For the reporting period, the CMS common systems and infrastructure worked well, without failures that caused significant data losses. One more disconnection of the magnet cold box occurred in the shadow of interruptions in data taking, caused by a series of technical faults. The recognition during 2012 that re-connection can only safely be done at around 2 T implies a minimum magnet recovery time of 12 hours and raises serious concerns about the number of ramping cycles of the magnet these incidents cause. This has triggered studies of how to make the cryo-system of the magnet more robust against failures. The proton-proton run ended just before the end-of-year CERN closure, during which CASTOR was installed on the negative end of CMS and both ZDC calorimeters were installed in TAN absorbers the LHC tunnel, in preparation for the heavy-ion run. The installation of CASTOR was an excellent “engineering test” of procedures for working in an activated environment. Despite some technical pr...

  7. Environmental Sciences Division annual progress report for period ending September 30, 1993

    Energy Technology Data Exchange (ETDEWEB)

    1994-05-01

    This progress report summarizes the research and development activities conducted in the Environmental Sciences Division (ESD) of Oak Ridge National Laboratory during fiscal year (FY) 1993, which extended from October 1, 1992, through September 30, 1993. The report is structured to provide descriptions of current activities and accomplishments in each of the division`s major organizational units. Following the sections describing the organizational units are sections highlighting ESD Scientific, Technical, and Administrative Achievement awards and listing information necessary to convey the scope of the work in the division. An organizational chart of staff and long-term guests who were in ESD and the end of FY 1993 is located in the final section of the report.

  8. Environmental Sciences Division annual progress report for period ending September 30, 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-31

    This progress report summarizes the research and development activities conducted in the Environmental Sciences Division (ESD) of Oak Ridge National Laboratory during fiscal year (FY) 1994, which extended from October 1, 1993, through September 30, 1994. The report is structured to provide descriptions of current activities and accomplishments in each of the division`s major organizational units. Following the sections describing the organizational units are sections highlighting ESD Scientific, Technical, and Administrative Achievement awards and listing information necessary to covey the scope of the work in the division. An organizational chart of staff and long-term guests who wee in ESD at the end of FY 1994 is located in the final section of the report.

  9. Terms in elliptic divisibility sequences divisible by their indices

    CERN Document Server

    Stange, Katherine E

    2010-01-01

    Let D = (D_n)_{n\\ge1} be an elliptic divisibility sequence. We study the set S(D) of indices n satisfying n | D_n. In particular, given an index n in S(D), we explain how to construct elements nd in S(D), where d is either a prime divisor of D_n, or d is the product of the primes in an aliquot cycle for D. We also give bounds for the exceptional indices that are not constructed in this way.

  10. Deformation quantization of principal bundles

    CERN Document Server

    Aschieri, Paolo

    2016-01-01

    We outline how Drinfeld twist deformation techniques can be applied to the deformation quantization of principal bundles into noncommutative principal bundles, and more in general to the deformation of Hopf-Galois extensions. First we twist deform the structure group in a quantum group, and this leads to a deformation of the fibers of the principal bundle. Next we twist deform a subgroup of the group of authomorphisms of the principal bundle, and this leads to a noncommutative base space. Considering both deformations we obtain noncommutative principal bundles with noncommutative fiber and base space as well.

  11. Earth-covered buildings: technical notes

    Energy Technology Data Exchange (ETDEWEB)

    Moreland, F L; Higgs, F; Shih, J [eds.

    1978-01-01

    John Cable, Architectural and Engineering Systems Branch, Division of Buildings and Community Systems, Department of Energy, kicked off the conference and spelled out the role of DOE in this area. One of his points was that the technical problems are easier than the institutional problems. A separate abstract was prepared for each of the 18 papers of this volume; all of the abstracts will appear in Energy Research Abstracts (ERA), and 16 were selected for Energy Abstractss for Policy Analysis (EAPA). (DCK)

  12. E-Division semiannual report, January 1--June 30, 1978. [LASL

    Energy Technology Data Exchange (ETDEWEB)

    Kelley, P.A. (comp.)

    1978-10-01

    The status of the programs and projects of the Electronics Division is reported for the period of January through June 1978. The presentation is divided into three sections: Research, Engineering Support, and Technical Services. Each of these sections presents the activities and accomplishments of the corresponding branch within the Division. The primary goal of the Research and Development branch is to advance technology for future applications. The primary goal of the Engineering Support branch is to apply advanced technology to Los Alamos Scientific Laboratory (LASL) and material problems. The primary goal of the Technical Services branch is to provide a technical base and support for LASL programs. Most of the individual reports are quite short; however, significant amounts of information are given in the area of detector research and development. 52 figures, 7 tables.

  13. Technical presentation

    CERN Multimedia

    FP Department

    2009-01-01

    07 April 2009 Technical presentation by Leuze Electronics: 14.00 – 15.00, Main Building, Room 61-1-017 (Room A) Photoelectric sensors, data identification and transmission systems, image processing systems. We at Leuze Electronics are "the sensor people": we have been specialising in optoelectronic sensors and safety technology for accident prevention for over 40 years. Our dedicated staff are all highly customer oriented. Customers of Leuze Electronics can always rely on one thing – on us! •\tFounded in 1963 •\t740 employees •\t115 MEUR turnover •\t20 subsidiaries •\t3 production facilities in southern Germany Product groups: •\tPhotoelectric sensors •\tIdentification and measurements •\tSafety devices

  14. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball and W. Zeuner

    2010-01-01

    Overview Once again, the bulk of this article reviews the intense activity of a recently completed shutdown, which, although quite unforeseeable until a few weeks before it started, proved by its success that our often advertised capability to conduct major maintenance within a two month period is real. Although safely completed, on-time to remarkable precision, the activity was not without incident, and highlighted our dependence on many experienced, specialist teams and their precise choreography. Even after the yoke was safely closed, magnet re-commissioning and beampipe pumpdown showed new and thought-provoking behaviour. The struggle to maintain adequate technical resources will be a pre-occupation over the coming months, in parallel with the start of truly sustained operation, for which various procedures are still being put in place. Planning for future shutdowns must now become a high priority, with many working groups and task forces already in existence to prepare infrastructure improvements and to...

  15. Technical presentation

    CERN Multimedia

    GS Department

    2010-01-01

    10 March 2010 DYNEOS 10:00 – 12:00 - Main Building, Room B, 61-1-009 Dyneos AG is active in the fields of photonics, laser and high-precision positioning. Our highly qualified engineer team has more than 30 years of experience in electro-optical solutions sales. The engineers are supported by a technical and administrative team. We are focused on the Swiss market and represent six suppliers (Coherent, PI Physik Instrumente, SIOS, Nanonics Imaging, APE, Ekspla) in order to give a qualified sales and service support to our customers. Our products are dedicated to the research field as well as to industry. In addition to standard catalog products, we offer custom designs to fulfill the specific needs of OEM customers or specific applications.

  16. Technical presentation

    CERN Multimedia

    FI Department

    2008-01-01

    RADIOSPARES, the leading catalogue distributor of components (electronic, electrical, automation, etc.) and industrial supplies will be at CERN on Friday 3 October 2008 (Main Building, Room B, from 9.00 a.m. to 3.00 p.m.) to introduce its new 2008/2009 catalogue. This will be the opportunity for us to present our complete range of products in more detail: 400 000 part numbers available on our web site (Radiospares France, RS International, extended range of components from other manufacturers); our new services: quotations, search for products not included in the catalogue, SBP products (Small Batch Production: packaging in quantities adapted to customers’ requirements); partnership with our focus manufacturers; demonstration of the on-line purchasing tool implemented on our web site in conjunction with CERN. RADIOSPARES will be accompanied by representatives of FLUKE and TYCO ELECTRONICS, who will make presentations, demonstrate materials and answer any technical questio...

  17. Waste Management Technical Manual

    Energy Technology Data Exchange (ETDEWEB)

    Buckingham, J.S. [ed.

    1967-08-31

    This Manual has been prepared to provide a documented compendium of the technical bases and general physical features of Isochem Incorporated`s Waste Management Program. The manual is intended to be used as a means of training and as a reference handbook for use by personnel responsible for executing the Waste Management Program. The material in this manual was assembled by members of Isochem`s Chemical Processing Division, Battelle Northwest Laboratory, and Hanford Engineering Services between September 1965 and March 1967. The manual is divided into the following parts: Introduction, contains a summary of the overall Waste Management Program. It is written to provide the reader with a synoptic view and as an aid in understanding the subsequent parts; Feed Material, contains detailed discussion of the type and sources of feed material used in the Waste Management Program, including a chapter on nuclear reactions and the formation of fission products; Waste Fractionization Plant Processing, contains detailed discussions of the processes used in the Waste Fractionization Plant with supporting data and documentation of the technology employed; Waste Fractionization Plant Product and Waste Effluent Handling, contains detailed discussions of the methods of handling the product and waste material generated by the Waste Fractionization Plant; Plant and Equipment, describes the layout of the Waste Management facilities, arrangement of equipment, and individual equipment pieces; Process Control, describes the instruments and analytical methods used for process control; and Safety describes process hazards and the methods used to safeguard against them.

  18. Technical Training: Technical Training Seminar

    CERN Multimedia

    2004-01-01

    TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Tuesday 3 February 2004 From 09:00 to 13:30 - Training Centre Auditorium - bldg. 593, room 11 USB (Universal Serial Bus) CYPRESS Seminar Claudia Colombini, Field Application Engineer CYPRESS ActiveComp Electronic GmbH D-85077 MANCHING, Germany As a pioneer in USB, CYPRESS sets the standard for cost-effective solutions without sacrificing functionality, performance or reliability. Having shipped over 200 million USB devices, Cypress is the undisputed market leader and demonstrates unmatched USB expertise. With the industry's broadest selection of USB solutions, Cypress has the right silicon, software and support for every USB application, from Low-speed to High-Speed and USB On-The-Go (OTG). 9:00 - 10:30 Overview of USB systems. USB CYPRESS product overview. Peripherals: Low Speed, Full Speed, High Speed (1.1 and 2.0). Hub Solutions, Embedded Host Solutions, On-The-Go (OTG) and wireless USB. USB Development Tools (first part) 10:30 -...

  19. Heparan sulfate and cell division

    Directory of Open Access Journals (Sweden)

    Porcionatto M.A.

    1999-01-01

    Full Text Available Heparan sulfate is a component of vertebrate and invertebrate tissues which appears during the cytodifferentiation stage of embryonic development. Its structure varies according to the tissue and species of origin and is modified during neoplastic transformation. Several lines of experimental evidence suggest that heparan sulfate plays a role in cellular recognition, cellular adhesion and growth control. Heparan sulfate can participate in the process of cell division in two distinct ways, either as a positive or negative modulator of cellular proliferation, or as a response to a mitogenic stimulus.

  20. A division's worth of data.

    Science.gov (United States)

    Pearce, Christopher; Shearer, Marianne; Gardner, Karina; Kelly, Jill

    2011-03-01

    Throughout the international community there is an increasing focus on the benefits of collecting, pooling and analysing patient data. General practice provides a great opportunity to create a comprehensive database of the Australian population as 90% of Australians visit their general practitioner each year and general practices are increasingly computerised. This article discusses the facilitatory role divisions of general practice can play in harnessing quality data from general practice and the benefits that may follow. It describes experience from 3 years of data pooling by the Melbourne East General Practice Network in Victoria and makes recommendations for other organisations interested in data collection.

  1. Code division multiple access (CDMA)

    CERN Document Server

    Buehrer, R Michael

    2006-01-01

    This book covers the basic aspects of Code Division Multiple Access or CDMA. It begins with an introduction to the basic ideas behind fixed and random access systems in order to demonstrate the difference between CDMA and the more widely understood TDMA, FDMA or CSMA. Secondly, a review of basic spread spectrum techniques are presented which are used in CDMA systems including direct sequence, frequency-hopping and time-hopping approaches. The basic concept of CDMA is presented, followed by the four basic principles of CDMA systems that impact their performance: interference averaging, universa

  2. Deformable Simplicial Complexes

    DEFF Research Database (Denmark)

    Misztal, Marek Krzysztof

    In this dissertation we present a novel method for deformable interface tracking in 2D and 3D|deformable simplicial complexes (DSC). Deformable interfaces are used in several applications, such as fluid simulation, image analysis, reconstruction or structural optimization. In the DSC method......, the interface (curve in 2D; surface in 3D) is represented explicitly as a piecewise linear curve or surface. However, the domain is also subject to discretization: triangulation in 2D; tetrahedralization in 3D. This way, the interface can be alternatively represented as a set of edges/triangles separating...... demonstrate those strengths in several applications. In particular, a novel, DSC-based fluid dynamics solver has been developed during the PhD project. A special feature of this solver is that due to the fact that DSC maintains an explicit interface representation, surface tension is more easily dealt with...

  3. Autogenous Deformation of Concrete

    DEFF Research Database (Denmark)

    Autogenous deformation of concrete can be defined as the free deformation of sealed concrete at a constant temperature. A number of observed problems with early age cracking of high-performance concretes can be attributed to this phenomenon. During the last 10 years , this has led to an increased...... focus on autogenous deformation both within concrete practice and concrete research. Since 1996 the interest has been significant enough to hold international, yearly conferences entirely devoted to this subject. The papers in this publication were presented at two consecutive half-day sessions...... at the American Concrete Institute’s Fall Convention in Phoenix, Arizona, October 29, 2002. All papers have been reviewed according to ACI rules. This publication, as well as the sessions, was sponsored by ACI committee 236, Material Science of Concrete. The 12 presentations from 8 different countries indicate...

  4. Autogenous Deformation of Concrete

    DEFF Research Database (Denmark)

    Autogenous deformation of concrete can be defined as the free deformation of sealed concrete at a constant temperature. A number of observed problems with early age cracking of high-performance concretes can be attributed to this phenomenon. During the last 10 years , this has led to an increased...... focus on autogenous deformation both within concrete practice and concrete research. Since 1996 the interest has been significant enough to hold international, yearly conferences entirely devoted to this subject. The papers in this publication were presented at two consecutive half-day sessions...... at the American Concrete Institute’s Fall Convention in Phoenix, Arizona, October 29, 2002. All papers have been reviewed according to ACI rules. This publication, as well as the sessions, was sponsored by ACI committee 236, Material Science of Concrete. The 12 presentations from 8 different countries indicate...

  5. Post-laminectomy deformities

    Directory of Open Access Journals (Sweden)

    Fabiano Stumpf Lutz

    2014-12-01

    Full Text Available Objective: To present the deformities and evaluate the results of their treatment. Methods: Retrospective study of patients with deformity following surgical access to the spinal canal. Fifteen patients who met the inclusion criteria were included. Patients without complete data in medical records were excluded. Results: Fourteen patients underwent surgical treatment and one patient received conservative treatment with vest type TLSO. The average angle of kyphosis correction was 87° preoperatively to 38° postoperatively, while the associated scoliosis correction was 69° preoperatively to 23° postoperatively. Conclusions: The prevention of deformity should be emphasized to avoid laminectomy alone, while laminoplasty should be the procedure of choice for canal access in surgeries where there is no need for resection of the posterior elements.

  6. Deformation of C isotopes

    CERN Document Server

    Kanada-Enyo, Y

    2004-01-01

    Systematic analysis of the deformations of proton and neutron densities in even-even C isotopes was done based on the method of antisymmetrized molecular dynamics. The $E2$ transition strength was discussed in relation to the deformation. We analyze the $B(E2;2^+_1\\to 0^+_1)$ in $^{16}$C, which has been recently measured to be abnormally small. The results suggest the difference of the deformations between proton and neutron densities in the neutron-rich C isotopes. It was found that stable proton structure in C isotopes plays an important role in the enhancement the neutron skin structure as well as in the systematics of $B(E2)$ in the neutron-rich C.

  7. Deformation in nanocrystalline metals

    Directory of Open Access Journals (Sweden)

    Helena Van Swygenhoven

    2006-05-01

    Full Text Available It is now possible to synthesize polycrystalline metals made up of grains that average less than 100 nm in size. Such nanocrystalline metals contain a significant volume fraction of interfacial regions separated by nearly perfect crystals. The small sizes involved limit the conventional operation of dislocation sources and thus a fundamental question arises: how do these materials deform plastically? We review the current views on deformation mechanisms in nanocrystalline, face-centered cubic metals based on insights gained by atomistic computer simulations. These insights are discussed with reference to recent striking experimental observations that can be compared with predictions made by the simulations.

  8. Heat treatment deformations

    Energy Technology Data Exchange (ETDEWEB)

    Bavaro, A. (Soliveri SpA, Caravaggio (Italy))

    1990-02-01

    Types and causes of heat treatement derived isotropic and anisotropic dilatancies in ferrous materials are reviewed. The concepts are developed in such a way as to allow extension to all materials exhibiting martensitic tempering behaviour. This paper intends to illustrate the basic processes of dimensional variations undergone by the materials under heat treatments. The parametric analysis includes an analysis of the interactions amongst the parameters themselves. The relative importance of each parameter is assessed in order to determine methods to attenuate deformation action. Simplified examples are offered to provide technicians explanations as to why specific deformations occur and indications on improved materials working techniques.

  9. The spindle pole bodies facilitate nuclear envelope division during closed mitosis in fission yeast.

    Science.gov (United States)

    Zheng, Liling; Schwartz, Cindi; Magidson, Valentin; Khodjakov, Alexey; Oliferenko, Snezhana

    2007-07-01

    Many organisms divide chromosomes within the confines of the nuclear envelope (NE) in a process known as closed mitosis. Thus, they must ensure coordination between segregation of the genetic material and division of the NE itself. Although many years of work have led to a reasonably clear understanding of mitotic spindle function in chromosome segregation, the NE division mechanism remains obscure. Here, we show that fission yeast cells overexpressing the transforming acid coiled coil (TACC)-related protein, Mia1p/Alp7p, failed to separate the spindle pole bodies (SPBs) at the onset of mitosis, but could assemble acentrosomal bipolar and antiparallel spindle structures. Most of these cells arrested in anaphase with fully extended spindles and nonsegregated chromosomes. Spindle poles that lacked the SPBs did not lead the division of the NE during spindle elongation, but deformed it, trapping the chromosomes within. When the SPBs were severed by laser microsurgery in wild-type cells, we observed analogous deformations of the NE by elongating spindle remnants, resulting in NE division failure. Analysis of dis1Delta cells that elongate spindles despite unattached kinetochores indicated that the SPBs were required for maintaining nuclear shape at anaphase onset. Strikingly, when the NE was disassembled by utilizing a temperature-sensitive allele of the Ran GEF, Pim1p, the abnormal spindles induced by Mia1p overexpression were capable of segregating sister chromatids to daughter cells, suggesting that the failure to divide the NE prevents chromosome partitioning. Our results imply that the SPBs preclude deformation of the NE during spindle elongation and thus serve as specialized structures enabling nuclear division during closed mitosis in fission yeast.

  10. The spindle pole bodies facilitate nuclear envelope division during closed mitosis in fission yeast.

    Directory of Open Access Journals (Sweden)

    Liling Zheng

    2007-07-01

    Full Text Available Many organisms divide chromosomes within the confines of the nuclear envelope (NE in a process known as closed mitosis. Thus, they must ensure coordination between segregation of the genetic material and division of the NE itself. Although many years of work have led to a reasonably clear understanding of mitotic spindle function in chromosome segregation, the NE division mechanism remains obscure. Here, we show that fission yeast cells overexpressing the transforming acid coiled coil (TACC-related protein, Mia1p/Alp7p, failed to separate the spindle pole bodies (SPBs at the onset of mitosis, but could assemble acentrosomal bipolar and antiparallel spindle structures. Most of these cells arrested in anaphase with fully extended spindles and nonsegregated chromosomes. Spindle poles that lacked the SPBs did not lead the division of the NE during spindle elongation, but deformed it, trapping the chromosomes within. When the SPBs were severed by laser microsurgery in wild-type cells, we observed analogous deformations of the NE by elongating spindle remnants, resulting in NE division failure. Analysis of dis1Delta cells that elongate spindles despite unattached kinetochores indicated that the SPBs were required for maintaining nuclear shape at anaphase onset. Strikingly, when the NE was disassembled by utilizing a temperature-sensitive allele of the Ran GEF, Pim1p, the abnormal spindles induced by Mia1p overexpression were capable of segregating sister chromatids to daughter cells, suggesting that the failure to divide the NE prevents chromosome partitioning. Our results imply that the SPBs preclude deformation of the NE during spindle elongation and thus serve as specialized structures enabling nuclear division during closed mitosis in fission yeast.

  11. Marginally Deformed Starobinsky Gravity

    DEFF Research Database (Denmark)

    Codello, A.; Joergensen, J.; Sannino, Francesco

    2015-01-01

    We show that quantum-induced marginal deformations of the Starobinsky gravitational action of the form $R^{2(1 -\\alpha)}$, with $R$ the Ricci scalar and $\\alpha$ a positive parameter, smaller than one half, can account for the recent experimental observations by BICEP2 of primordial tensor modes....

  12. Metals and Ceramics Division progress report for period ending September 30, 1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    This report provides a brief overview of the activities and accomplishments of the Metals and Ceramics (M C) Division during fiscal year (FY) 1991. The division is organized to provide technical support, primarily in the area of high-temperature materials, for the various technologies being developed by the US Department of Energy (DOE). Activities span the range from basic research (through applied research and engineering development) to industrial interactions (through cooperative research and a strong technology transfer program). The division is organized in functional groups that encompass nearly all of the disciplines needed to develop and to apply materials in high-temperature applications. Sections I through 5 describe the different functional groups; Sect. 6 provides an alternative view of the division in terms of the major programs, most of which cross group lines; and Sect. 7 summarizes external interactions including cooperative research and development programs, educational activities, and technology transfer functions. Appendices describe the organizational structure, note personnel changes, present honors and awards received by division members, and contain listings of publications completed and presentations made at technical meetings.

  13. TECHNICAL COORDINATION

    CERN Multimedia

    Austin Ball

    2013-01-01

      Since the last report, much visible progress has been made, as the LS1 programme approaches the halfway point. From early October, technical and safety shift-crew have been present around the clock, allowing detectors to stay switched on overnight, ensuring that safety systems are operational and instructions for non-expert shift-crew are clear. LS1 progress Throughout the summer, whilst the solenoid vacuum tank and YB0 surfaces were accessible, an extensive installation programme took place to prepare for Tracker colder operation and the PLT installation, in 2014, the Phase 1 Pixel Tracker installation, in 2016–’17, and the HCAL Phase 1 upgrade completion, ending in LS2. This included pipework for N2 or dry air to flush the Tracker bulkhead region, many sensors to monitor temperature and dew point in the Tracker and its service channels, heating wires outside the Tracker cooling bundles, supports for the new vacuum-jacketed, concentric, CO2 Pixel cooling lines, the PLT cool...

  14. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball and W. Zeuner

    2012-01-01

      UXC + detectors As explained in detail in the November 2011 bulletin, the bellows unit at −18.5 m from the CMS interaction point was identified as a prime candidate for the regularly occurring pressure spikes which occasionally led to sustained severe background conditions in 2011, affecting dead time and data quality. Similar regions in LHC with vacuum instabilities were observed to be close to bellows, which radiography showed to have distorted RF-fingers — on removal, they proved to have been severely overheated. The plans for the Year-End Technical Stop were adapted to prioritise radiography of the bellows at 16 m to 18 m either end of CMS. Excellent work by the beam pipe, survey and heavy mechanical teams allowed the X-rays to be taken as planned on 20th December, showing that the bellow at −18.5m had an obvious non-conformity. The RF-fingers were found inside the end of the opposing flared pipe instead of outside. In addition, the overlap between fingers and...

  15. Mathematical Sciences Division 1992 Programs

    Science.gov (United States)

    1992-10-01

    Behavior of Multipolar Viscous Fluids PI: Hamid Bellout Northern Illinois University Department of Mathematical Sciences (815) 753-6763 FUNDING AGENCY...Madani Technical Objective: A new constitutive " multipolar " theory to describe the flow of viscous fluids will be formulated. This theory assumes nonlinear...variability in the response characteristics of individual neurons . Since the individual neurons are nodes in a network, this will yield a better

  16. Divisions Panel Discussion: Astronomy for Development

    Science.gov (United States)

    Govender, Kevin; Hemenway, Mary Kay; Wolter, Anna; Haghighipour, Nader; Yan, Yihua; van Dishoeck, E. F.; Silva, David; Guinan, Edward

    2016-10-01

    The main purpose of this panel discussion was to encourage conversation around potential collaborations between the IAU Office of Astronomy for Development (OAD) and IAU Divisions. The discussion was facilitated by the OAD and the conversation revolved mainly around two questions: (i) What should the OAD be doing to enhance the work of the Divisions? (ii) What could the Divisions (both members and respective scientific discipline in general) contribute towards the implementation of the IAU strategic plan?

  17. Deformed Algebras and Generalizations of Independence on Deformed Exponential Families

    Directory of Open Access Journals (Sweden)

    Hiroshi Matsuzoe

    2015-08-01

    Full Text Available A deformed exponential family is a generalization of exponential families. Since the useful classes of power law tailed distributions are described by the deformed exponential families, they are important objects in the theory of complex systems. Though the deformed exponential families are defined by deformed exponential functions, these functions do not satisfy the law of exponents in general. The deformed algebras have been introduced based on the deformed exponential functions. In this paper, after summarizing such deformed algebraic structures, it is clarified how deformed algebras work on deformed exponential families. In fact, deformed algebras cause generalization of expectations. The three kinds of expectations for random variables are introduced in this paper, and it is discussed why these generalized expectations are natural from the viewpoint of information geometry. In addition, deformed algebras cause generalization of independences. Whereas it is difficult to check the well-definedness of deformed independence in general, the κ-independence is always well-defined on κ-exponential families. This is one of advantages of κ-exponential families in complex systems. Consequently, we can well generalize the maximum likelihood method for the κ-exponential family from the viewpoint of information geometry.

  18. Deformation of chlorite in naturally deformed low-grade rocks

    NARCIS (Netherlands)

    Bons, A.J.

    1988-01-01

    The intracrystalline deformation of chlorite in naturally deformed low-grade rocks was investigated with transmission electron microscopy (TEM). As in other phyllosilicates, the deformation of chlorite is dominated by the (001) slip plane. Slip along this plane is very easy through the generation an

  19. Major Programs | Division of Cancer Prevention

    Science.gov (United States)

    The Division of Cancer Prevention supports major scientific collaborations, research networks, investigator-initiated grants, postdoctoral training, and specialized resources across the United States. |

  20. Power Efficient Division and Square Root Unit

    DEFF Research Database (Denmark)

    Liu, Wei; Nannarelli, Alberto

    2012-01-01

    shows that division and square root units based on the digit-recurrence algorithm offer the best tradeoff delay-area-power. Moreover, the two operations can be combined in a single unit. Here, we present a radix-16 combined division and square root unit obtained by overlapping two radix-4 stages......Although division and square root are not frequent operations, most processors implement them in hardware to not compromise the overall performance. Two classes of algorithms implement division or square root: digit-recurrence and multiplicative (e.g., Newton-Raphson) algorithms. Previous work...

  1. Fair division theory and climate change policy

    Energy Technology Data Exchange (ETDEWEB)

    Helm, C. [Technical University Darmstadt (Germany). Department of Law and Economics

    2008-09-30

    This paper analyzes the fair division of common property resources when monetary compensations are feasible. A prominent example is the fair division of the atmosphere's limited absorptive capacity for greenhouse gases. I propose a solution that is Pareto efficient and satisfies the axiomatic fair division criteria of individual rationality, stand-alone upper bound, and a version of envy-freeness. The latter criterion is adapted to problems where monetary compensations can be used to facilitate the fair division of the common resource. Applied to climate change, the solution implies that developing countries should participate in emission reduction efforts, but should be fully compensated for their incremental abatement costs.

  2. Division Unit for Binary Integer Decimals

    DEFF Research Database (Denmark)

    Lang, Tomas; Nannarelli, Alberto

    2009-01-01

    -recurrence algorithm to BID representation and implement the division unit in standard cell technology. The implementation of the proposed BID division unit is compared to that of a BCD based unit implementing the same algorithm. The comparison shows that for normalized operands the BID unit has the same latency......In this work, we present a radix-10 division unit that is based on the digit-recurrence algorithm and implements binary encodings (binary integer decimal or BID) for significands. Recent decimal division designs are all based on the binary coded decimal (BCD) encoding. We adapt the radix-10 digit...

  3. Division Algebras and Quantum Theory

    CERN Document Server

    Baez, John C

    2011-01-01

    Quantum theory may be formulated using Hilbert spaces over any of the three associative normed division algebras: the real numbers, the complex numbers and the quaternions. Indeed, these three choices appear naturally in a number of axiomatic approaches. However, there are internal problems with real or quaternionic quantum theory. Here we argue that these problems can be resolved if we treat real, complex and quaternionic quantum theory as part of a unified structure. Dyson called this structure the "three-fold way". It is perhaps easiest to see it in the study of irreducible unitary representations of groups on complex Hilbert spaces. These representations come in three kinds: those that are not isomorphic to their own dual (the truly "complex" representations), those that are self-dual thanks to a symmetric bilinear pairing (which are "real", in that they are the complexifications of representations on real Hilbert spaces), and those that are self-dual thanks to an antisymmetric bilinear pairing (which are...

  4. Metals and Ceramics Division progress report for period ending June 30, 1984

    Energy Technology Data Exchange (ETDEWEB)

    Brogden, I. (ed.)

    1984-09-01

    This progress report covers the research and development activities of the Metals and Ceramics Division from January 1, 1983, through June 30, 1984. The format of the report follows the organizational structure of the division. Short summaries of technical work in progress in the various experimental groups are presented in six parts. Chapter 1 deals with the research and development activities of the Engineering Materials Section, Chapter 2 with the Processing Science and Technology Section, Chapter 3 with the Materials Science Section, Chapter 4 with Project Activities, Chapter 5 with Specialized Research Facilities and Equipment, and Chapter 6 with Miscellaneous Activities.

  5. Postural deformities in Parkinson's disease

    NARCIS (Netherlands)

    Doherty, K.M.; Warrenburg, B.P.C. van de; Peralta, M.C.; Silveira-Moriyama, L.; Azulay, J.P.; Gershanik, O.S.; Bloem, B.R.

    2011-01-01

    Postural deformities are frequent and disabling complications of Parkinson's disease (PD) and atypical parkinsonism. These deformities include camptocormia, antecollis, Pisa syndrome, and scoliosis. Recognition of specific postural syndromes might have differential diagnostic value in patients prese

  6. Nonperturbative effects in deformation quantization

    CERN Document Server

    Periwal, V

    2000-01-01

    The Cattaneo-Felder path integral form of the perturbative Kontsevich deformation quantization formula is used to explicitly demonstrate the existence of nonperturbative corrections to na\\"\\i ve deformation quantization.

  7. Nanoscale deformation mechanisms in bone.

    Science.gov (United States)

    Gupta, Himadri S; Wagermaier, Wolfgang; Zickler, Gerald A; Raz-Ben Aroush, D; Funari, Sérgio S; Roschger, Paul; Wagner, H Daniel; Fratzl, Peter

    2005-10-01

    Deformation mechanisms in bone matrix at the nanoscale control its exceptional mechanical properties, but the detailed nature of these processes is as yet unknown. In situ tensile testing with synchrotron X-ray scattering allowed us to study directly and quantitatively the deformation mechanisms at the nanometer level. We find that bone deformation is not homogeneous but distributed between a tensile deformation of the fibrils and a shearing in the interfibrillar matrix between them.

  8. Cosmetic and Functional Nasal Deformities

    Science.gov (United States)

    ... nasal complaints. Nasal deformity can be categorized as “cosmetic” or “functional.” Cosmetic deformity of the nose results in a less ... taste , nose bleeds and/or recurrent sinusitis . A cosmetic or functional nasal deformity may occur secondary to ...

  9. 100 Areas technical activities report, engineers - March 1951

    Energy Technology Data Exchange (ETDEWEB)

    1951-04-01

    This is the monthly 100 areas technical activities report from the engineering division for the month of March 1951. It reports on engineering activities related directly to the different production reactors, and gives progress reports on various engineering projects which are in development by the engineering group.

  10. Massachusetts Institute of Technology, Plasma Fusion Center, Technical Research Programs

    Energy Technology Data Exchange (ETDEWEB)

    Davidson, Ronald C.

    1980-08-01

    A review is given of the technical programs carried out by the Plasma Fusion Center. The major divisions of work areas are applied plasma research, confinement experiments, fusion technology and engineering, and fusion systems. Some objectives and results of each program are described. (MOW)

  11. QuikForm: Intelligent deformation processing of structural alloys

    Energy Technology Data Exchange (ETDEWEB)

    Bourcier, R.J.; Wellman, G.W.

    1994-09-01

    There currently exists a critical need for tools to enhance the industrial competitiveness and agility of US industries involved in deformation processing of structural alloys. In response to this need, Sandia National Laboratories has embarked upon the QuikForm Initiative. The goal of this program is the development of computer-based tools to facilitate the design of deformation processing operations. The authors are currently focusing their efforts on the definition/development of a comprehensive system for the design of sheet metal stamping operations. The overall structure of the proposed QuikForm system is presented, and the focus of their thrust in each technical area is discussed.

  12. Analytical Chemistry Division annual progress report for period ending December 31, 1988

    Energy Technology Data Exchange (ETDEWEB)

    1988-05-01

    The Analytical Chemistry Division of Oak Ridge National Laboratory (ORNL) is a large and diversified organization. As such, it serves a multitude of functions for a clientele that exists both in and outside of ORNL. These functions fall into the following general categories: (1) Analytical Research, Development, and Implementation. The division maintains a program to conceptualize, investigate, develop, assess, improve, and implement advanced technology for chemical and physicochemical measurements. Emphasis is on problems and needs identified with ORNL and Department of Energy (DOE) programs; however, attention is also given to advancing the analytical sciences themselves. (2) Programmatic Research, Development, and Utilization. The division carries out a wide variety of chemical work that typically involves analytical research and/or development plus the utilization of analytical capabilities to expedite programmatic interests. (3) Technical Support. The division performs chemical and physicochemical analyses of virtually all types. The Analytical Chemistry Division is organized into four major sections, each of which may carry out any of the three types of work mentioned above. Chapters 1 through 4 of this report highlight progress within the four sections during the period January 1 to December 31, 1988. A brief discussion of the division's role in an especially important environmental program is given in Chapter 5. Information about quality assurance, safety, and training programs is presented in Chapter 6, along with a tabulation of analyses rendered. Publications, oral presentations, professional activities, educational programs, and seminars are cited in Chapters 7 and 8.

  13. [Babies with cranial deformity].

    Science.gov (United States)

    Feijen, Michelle M W; Claessens, Edith A W M Habets; Dovens, Anke J Leenders; Vles, Johannes S; van der Hulst, Rene R W J

    2009-01-01

    Plagiocephaly was diagnosed in a baby aged 4 months and brachycephaly in a baby aged 5 months. Positional or deformational plagio- or brachycephaly is characterized by changes in shape and symmetry of the cranial vault. Treatment options are conservative and may include physiotherapy and helmet therapy. During the last two decades the incidence of positional plagiocephaly has increased in the Netherlands. This increase is due to the recommendation that babies be laid on their backs in order to reduce the risk of sudden infant death syndrome. We suggest the following: in cases of positional preference of the infant, referral to a physiotherapist is indicated. In cases of unacceptable deformity of the cranium at the age 5 months, moulding helmet therapy is a possible treatment option.

  14. Deformation twinning in monazite

    Energy Technology Data Exchange (ETDEWEB)

    Hay, R.S.; Marshall, D.B

    2003-10-20

    Polycrystalline monazite (LaPO{sub 4}) was deformed at room temperature by a spherical indenter. Deformation twins were identified by TEM in 70 grains. Five twin planes were found: (100) was by far the most common; (001) and (120) were less common; (122-bar)was rare, and kinks in (120) twins were identified as irrational '(483)' twin planes. The twinning modes on these planes were inferred from the expression of twinning shear at free surfaces, predictions of classical deformation twinning theory, and various considerations of twin morphology and crystal structure. Atomic shuffle calculations that allow formation of either a glide plane or a mirror plane at the twin interface were used to analyze twin modes. The inferred twin modes all have small atomic shuffles. For (001) twins, the smallest shuffles were obtained with a glide plane at the interface, with displacement vector R=((1)/(2))[010]. The results do not uniquely define a twin mode on (100), leaving open the possibility of more than one mode operating on this plane. Factors that may determine the operative deformation twinning modes are discussed. Crystal structure considerations suggest that the relative abundance of twinning modes may correlate with low shear modulus on the twin plane in the direction of twinning shear, and with a possible low-energy interface structure consisting of a layer of xenotime of one half-unit-cell thickness that could form at (100) and (001) twins. The three most common twins have low strains to low {sigma} coincidence site lattices (CSLs)

  15. Localization of plastic deformation

    Energy Technology Data Exchange (ETDEWEB)

    Rice, J R

    1976-04-01

    The localization of plastic deformation into a shear band is discussed as an instability of plastic flow and a precursor to rupture. Experimental observations are reviewed, a general theoretical framework is presented, and specific calculations of critical conditions are carried out for a variety of material models. The interplay between features of inelastic constitutive description, especially deviations from normality and vertex-like yielding, and the onset of localization is emphasized.

  16. Sprengels deformity: anaesthesia management.

    Directory of Open Access Journals (Sweden)

    Dave S

    2000-04-01

    Full Text Available A 28 years old lady presented with Sprengels deformity and hemivertebrae for Fothergills surgery. Clinically there were no anomalies of the nervous, renal or the cardiovascular systems. She had a short neck and score on modified Mallapati test was grade 2. She was successfully anaesthetised using injection Propofol as a total intravenous anaesthetic agent after adequate premedication with injection Midazolam and injection Pentazocine. Patient had an uneventful intraoperative and postoperative course.

  17. 78 FR 39715 - Agency Information Collection Activities; Comment Request; Carl D. Perkins Career and Technical...

    Science.gov (United States)

    2013-07-02

    ... receive Federal funds. The Office of Vocational and Adult Education/Division of Academic and Technical... Agency Information Collection Activities; Comment Request; Carl D. Perkins Career and Technical Education Improvement Act of 2006 (P.L. 109-270) State Plan Guide AGENCY: Office of Vocational and Adult Education...

  18. 78 FR 24394 - Agency Information Collection Activities; Comment Request; Carl D. Perkins Career and Technical...

    Science.gov (United States)

    2013-04-25

    .... The Office of Vocational and Adult Education/Division of Academic and Technical Education program... Agency Information Collection Activities; Comment Request; Carl D. Perkins Career and Technical Education Improvement Act of 2006 (P.L. 109-270) State Plan Guide AGENCY: Office of Vocational and Adult Education...

  19. DEFORMATION OF COPOLYMER MICELLES INDUCED BY AMPHIPHILIC DIMER PARTICLES

    Institute of Scientific and Technical Information of China (English)

    Xiao-chun Qin; Chun-lai Ren

    2012-01-01

    Combining self-consistent-field theory and density-functional theory,we systematically study the deformation of copolymer micelles induced by the presence of amphiphilic dimer particles.Due to the amphiphilic nature,dimer particles tend to accumulate onto the interface of the copolymer micelle.With increasing concentration of the symmetric dimer particles,which are made of two identical spherical particles,the micelle deforms from the initial sphere to ellipse,dumbbell,and finally separates into two micelles.Furthermore,asymmetric dimer particles,composed by two particles with different sizes,are considered to investigate the influence of geometry of dimer particles on the deformation of the micelle.It is found that the micelle inclines to deform into dumbbell due to the additional curvature originating in the gathering of asymmetric dimer particles onto the interface of the micelle.The present study on the deformation of micelles is useful to understand the possible shape variation in the course of cell division/fusion.

  20. "American Gothic" and the Division of Labor.

    Science.gov (United States)

    Saunders, Robert J.

    1987-01-01

    Provides historical review of gender-based division of labor. Argues that gender-based division of labor served a purpose in survival of tribal communities but has lost meaning today and may be a handicap to full use of human talent and ability in the arts. There is nothing in various art forms which make them more appropriate for males or…

  1. Distinguishing division algebras by finite splitting fields

    CERN Document Server

    Krashen, Daniel

    2010-01-01

    This paper is concerned with the problem of determining the number of division algebras which share the same collection of finite splitting fields. As a corollary we are able to determine when two central division algebras may be distinguished by their finite splitting fields over certain fields.

  2. On Durkheim's Explanation of Division of Labor.

    Science.gov (United States)

    Rueschemeyer, Dietrich

    1982-01-01

    In De la Division du Travail Social, Durkheim's causal explanation for secular increases in the division of labor and the differentiation of social structure is flawed. His metatheoretical concerns expressed in the critique of utilitarian social theory flawed his contributions to a causal explanation of social differentiation. (Author/AM)

  3. Introduction to JPL's Mechanical Systems Division

    Science.gov (United States)

    Short, Kendra

    2007-01-01

    This slide presentation reviews the work of the Mechanical Systems Division. It reviews the projects, both past and current that the engineers of this division have worked on. It also reviews the work environment as an exciting place for the entry level engineer.

  4. The Division of Labor as Social Interaction

    Science.gov (United States)

    Freidson, Eliot

    1976-01-01

    Three different principles and ideologies by which the division of labor can be organized are sketched, along with their consequences for variation in structure and content. It is noted that the reality of the division of labor lies in the social interaction of its participants. (Author/AM)

  5. Teaching Cell Division: Basics and Recommendations.

    Science.gov (United States)

    Smith, Mike U.; Kindfield, Ann C. H.

    1999-01-01

    Presents a concise overview of cell division that includes only the essential concepts necessary for understanding genetics and evolution. Makes recommendations based on published research and teaching experiences that can be used to judge the merits of potential activities and materials for teaching cell division. Makes suggestions regarding the…

  6. Polarized Cell Division of Chlamydia trachomatis

    Science.gov (United States)

    Abdelrahman, Yasser; Ouellette, Scot P.; Belland, Robert J.; Cox, John V.

    2016-01-01

    Bacterial cell division predominantly occurs by a highly conserved process, termed binary fission, that requires the bacterial homologue of tubulin, FtsZ. Other mechanisms of bacterial cell division that are independent of FtsZ are rare. Although the obligate intracellular human pathogen Chlamydia trachomatis, the leading bacterial cause of sexually transmitted infections and trachoma, lacks FtsZ, it has been assumed to divide by binary fission. We show here that Chlamydia divides by a polarized cell division process similar to the budding process of a subset of the Planctomycetes that also lack FtsZ. Prior to cell division, the major outer-membrane protein of Chlamydia is restricted to one pole of the cell, and the nascent daughter cell emerges from this pole by an asymmetric expansion of the membrane. Components of the chlamydial cell division machinery accumulate at the site of polar growth prior to the initiation of asymmetric membrane expansion and inhibitors that disrupt the polarity of C. trachomatis prevent cell division. The polarized cell division of C. trachomatis is the result of the unipolar growth and FtsZ-independent fission of this coccoid organism. This mechanism of cell division has not been documented in other human bacterial pathogens suggesting the potential for developing Chlamydia-specific therapeutic treatments. PMID:27505160

  7. Materials Sciences Division 1990 annual report

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-31

    This report is the Materials Sciences Division`s annual report. It contains abstracts describing materials research at the National Center for Electron Microscopy, and for research groups in metallurgy, solid-state physics, materials chemistry, electrochemical energy storage, electronic materials, surface science and catalysis, ceramic science, high tc superconductivity, polymers, composites, and high performance metals.

  8. Hemispheric Division of Labour in Reading

    Science.gov (United States)

    Shillcock, Richard C.; McDonald, Scott A.

    2005-01-01

    We argue that the reading of words and text is fundamentally conditioned by the splitting of the fovea and the hemispheric division of the brain, and, furthermore, that the equitable division of labour between the hemispheres is a characteristic of normal visual word recognition. We report analyses of a representative corpus of the eye fixations…

  9. Nicely semiramified division algebras over Henselian fields

    Directory of Open Access Journals (Sweden)

    Karim Mounirh

    2005-01-01

    Full Text Available This paper deals with the structure of nicely semiramified valued division algebras. We prove that any defectless finite-dimensional central division algebra over a Henselian field E with an inertial maximal subfield and a totally ramified maximal subfield (not necessarily of radical type (resp., split by inertial and totally ramified field extensions of E is nicely semiramified.

  10. Cognitive and Neural Sciences Division, 1991 Programs.

    Science.gov (United States)

    Vaughan, Willard S., Ed.

    This report documents research and development performed under the sponsorship of the Cognitive and Neural Sciences Division of the Office of Naval Research in fiscal year 1991. It provides abstracts (title, principal investigator, project code, objective, approach, progress, and related reports) of projects of three program divisions (cognitive…

  11. Polarized Cell Division of Chlamydia trachomatis.

    Science.gov (United States)

    Abdelrahman, Yasser; Ouellette, Scot P; Belland, Robert J; Cox, John V

    2016-08-01

    Bacterial cell division predominantly occurs by a highly conserved process, termed binary fission, that requires the bacterial homologue of tubulin, FtsZ. Other mechanisms of bacterial cell division that are independent of FtsZ are rare. Although the obligate intracellular human pathogen Chlamydia trachomatis, the leading bacterial cause of sexually transmitted infections and trachoma, lacks FtsZ, it has been assumed to divide by binary fission. We show here that Chlamydia divides by a polarized cell division process similar to the budding process of a subset of the Planctomycetes that also lack FtsZ. Prior to cell division, the major outer-membrane protein of Chlamydia is restricted to one pole of the cell, and the nascent daughter cell emerges from this pole by an asymmetric expansion of the membrane. Components of the chlamydial cell division machinery accumulate at the site of polar growth prior to the initiation of asymmetric membrane expansion and inhibitors that disrupt the polarity of C. trachomatis prevent cell division. The polarized cell division of C. trachomatis is the result of the unipolar growth and FtsZ-independent fission of this coccoid organism. This mechanism of cell division has not been documented in other human bacterial pathogens suggesting the potential for developing Chlamydia-specific therapeutic treatments.

  12. Research in rock deformation: Report of the Second Rock Deformation Colloquium, 1989 AGU Spring Meeting

    Science.gov (United States)

    Green, Harry

    In response to the considerable interest expressed at the first Rock Deformation Colloquium held at the Fall 1988 AGU meeting in San Francisco, a second dinner meeting was held on Monday evening, May 8, 1989, at the Omni Hotel in Baltimore. The principal business items were a report by Steve Kirby (U.S. Geological Survey, Menlo Park, Calif.) concerning the meeting the previous day of the rock deformation steering committee and an after dinner presentation by Steve Freiman of the National Institute of Standards and Technology in Gaithersburg, Md., entitled “The Environmental Effects on Subcritical Crack Growth.” Kirby reported that a technical committee for rock deformation has been established within the Tectonophysics Section of AGU; the steering committee will attempt to establish constructive working relations with allied societies and disciplines, such as ceramics, metallurgy, materials science, structural geology, and surface science. Brian Evans of the Massachusetts Institute of Technology in Cambridge, Terry Tullis of Brown University in Providence, R.I., and Harry Green of the University of California at Davis agreed to be a subcommittee to propose a name for the technical committee, for discussion at the next steering committee meeting to be held before the 1989 Fall AGU meeting. Green also agreed to investigate the possibility of convening a special session at the Fall Meeting on the nature and mechanism of deep-focus earthquakes. (The session is Deep Slab Deformation and Faulting, T21B and T22A, organized by Harry and Ken Creager of the University of Washington, Seattle; it will be all day on Tuesday, December 5.)

  13. Nanoscale Deformable Optics

    Science.gov (United States)

    Strauss, Karl F.; Sheldon, Douglas J.

    2011-01-01

    Several missions and instruments in the conceptual design phase rely on the technique of interferometry to create detectable fringe patterns. The intimate emplacement of reflective material upon electron device cells based upon chalcogenide material technology permits high-speed, predictable deformation of the reflective surface to a subnanometer or finer resolution with a very high degree of accuracy. In this innovation, a layer of reflective material is deposited upon a wafer containing (perhaps in the millions) chalcogenic memory cells with the reflective material becoming the front surface of a mirror and the chalcogenic material becoming a means of selectively deforming the mirror by the application of heat to the chalcogenic material. By doing so, the mirror surface can deform anywhere from nil to nanometers in spots the size of a modern day memory cell, thereby permitting realtime tuning of mirror focus and reflectivity to mitigate aberrations caused elsewhere in the optical system. Modern foundry methods permit the design and manufacture of individual memory cells having an area of or equal to the Feature (F) size of the design (assume 65 nm). Fabrication rules and restraints generally require the instantiation of one memory cell to another no closer than 1.5 F, or, for this innovation, 90 nm from its neighbor in any direction. Chalcogenide is a semiconducting glass compound consisting of a combination of chalcogen ions, the ratios of which vary according to properties desired. It has been shown that the application of heat to cells of chalcogenic material cause a large alteration in resistance to the range of 4 orders of magnitude. It is this effect upon which chalcogenidebased commercial memories rely. Upon removal of the heat source, the chalcogenide rapidly cools and remains frozen in the excited state. It has also been shown that the chalcogenide expands in volume because of the applied heat, meaning that the coefficient of expansion of chalcogenic

  14. Israel: the Division before Peace

    Directory of Open Access Journals (Sweden)

    Ferran Izquierdo Brichs

    2000-01-01

    Full Text Available The process of the Middle East peace negotiations at the beginning of the 1990s has its roots in the changes in the international system and in Israeli society. The end of the Cold War, the Gulf War in 1990-1991 and globalization forced all the region’s actors to resituate themselves within the new international context. However, Israeli society neither experienced the international changes in the same way as its neighbors nor did it undergo the same evolutionduring the conflict with the Arabs. Because of this, the debate over peace and the future of the occupied territories became a factor for political and ideological division. Influencing this debate were revised conceptions on security, the economy, and the role Israel should play in the world. The Middle East peace talks began because the strongest side in the conflict, Israel’s Labor government, came to perceive that the maintenance of the status quo was negative forits interests. From the Israeli point of view, the conflict had long been considered a zero-sum game despite the Palestinian’s compromises since the construction of the Palestinian State involved handing over part of the territory claimed by the Jews. Recent changes in the perceptions of Israeli’s own interests, though, led some sectors of Jewish society to re-think and diminish the supposed incompatibility between Palestine nationalism and Zionism, which then opened the doors towards peace. For the Labor government, the territorial occupation of all Palestine was no longer a central objective. In fact, the basic interests of the Labor party’s policies shifted due to the globalization of the international system. For Likud and the Zionist revisionists, however, the occupation and the colonization of Eretz Israel still form the basic ideology of the State –of its reason for being– for which even today both are associated with the national interest, together with Israel’s very survival. Seen this way, Israel

  15. Gravity and the orientation of cell division

    Science.gov (United States)

    Helmstetter, C. E.

    1997-01-01

    A novel culture system for mammalian cells was used to investigate division orientations in populations of Chinese hamster ovary cells and the influence of gravity on the positioning of division axes. The cells were tethered to adhesive sites, smaller in diameter than a newborn cell, distributed over a nonadhesive substrate positioned vertically. The cells grew and divided while attached to the sites, and the angles and directions of elongation during anaphase, projected in the vertical plane, were found to be random with respect to gravity. However, consecutive divisions of individual cells were generally along the same axis or at 90 degrees to the previous division, with equal probability. Thus, successive divisions were restricted to orthogonal planes, but the choice of plane appeared to be random, unlike the ordered sequence of cleavage orientations seen during early embryo development.

  16. Energy Division annual progress report for period ending September 30, 1992

    Energy Technology Data Exchange (ETDEWEB)

    Counce, D.M.; Wolff, P.P. [eds.

    1993-04-01

    Energy Division`s mission is to provide innovative solutions to energy and related Issues of national and global importance through interdisciplinary research and development. Its goals and accomplishments are described in this annual progress report for FY 1992. Energy Division`s total expenditures in FY 1992 were $42.8 million. The work is supported by the US Department of Energy, the US Department of Defense, many other federal agencies, and some private organizations. Disciplines of the 116.5 technical staff members include engineering, social sciences, physical and life sciences, and mathematics and statistics. The division`s programmatic activities cover three main areas: (1) analysis and assessment, (2) energy conservation technologies, and (3) military transportation systems. Analysis and assessment activities involve energy and resource analysis, preparation of environmental assessments and impact statements, research on waste management, technology transfer, analysis of energy and environmental needs in developing countries, and civilian transportation analysis. Energy conservation technologies focus on electric power systems, building envelopes (walls, foundations, roofs, attics, and materials), and methods to improve energy efficiency in existing buildings. Military transportation systems conduct research for sponsors within the US military to improve the efficiency of military deployment, scheduling, and transportation coordination. Much of Energy Division`s research is valuable to other organizations as well as to sponsors. This information is disseminated by the staff`s involvement in professional and trade organizations and workshops; joint research with universities and private-sector firms; collaboration with state and local governments; presentation of work at conferences; and publication of research results in journals, reports, and conference proceedings.

  17. Energy Division annual progress report for period ending September 30, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Wolff, P.P. [ed.

    1994-07-01

    One of 17 research divisions at Oak Ridge National Laboratory, Energy Division`s mission is to provide innovative solutions to energy and related issues of national and global importance through interdisciplinary research and development. Its goals and accomplishments are described in this annual progress report for FY1993. Energy Division is committed to (1) understanding the mechanisms by which societies make choices in energy use; (2) improving society`s understanding of the environmental, social, and economic implications of technological change; (3) developing and transferring energy-efficient technologies; (4) improving transportation policy and planning; (5) enhancing basic knowledge in the social sciences as related to energy and associated issues. Energy Division`s expenditures in FY1993 totaled $42 million. The work was supported by the US DOE, DOD, many other federal agencies, and some private organizations. Disciplines of the 126.5 technical staff members include engineering, social sciences, physical and life sciences, and computer sciences and data systems. The division`s programmatic activities cover three main areas: (1) analysis and assessment, (2) energy use and delivery technologies, and (3) transportation systems. Analysis and assessment activities involve energy and resource analysis, preparation of environmental assessments and impact statements, research on emergency preparedness, transportation analysis, and analysis of energy and environmental needs in developing countries. Energy use and delivery technologies focus on electric power systems, building equipment, building envelopes (walls, foundations, roofs, attics, and materials), and methods to improve energy efficiency in existing buildings. Transportation systems research is conducted both to improve the quality of civilian transportation and for sponsors within the US military to improve the efficiency of deployment, scheduling, and transportation coordination.

  18. Gender relations, the gendered division of labour and health: the case of the women factory workers of Rio Tinto, northeast Brazil, 1924-91.

    Science.gov (United States)

    Ferreira De Macedo, M B

    1996-01-01

    This article examines gendered work-health relationships among female factory workers in Rio Tinto, a textile factory town in Brazil. The author draws on her own and her parents' experiences as factory workers and as residents of Rio Tinto. In addition, she gathered research during 1982-86 and 1988-93, interviewing 30 female and 12 male workers. Findings from 1924-58 and 1959-91 indicate that the family structure and work process were interlinked. Self-images are construed to be the intersection of social relations of sex and class, psychopathology, and the concept of work positions. Gendered relations are a social construction, and awareness of these relations is based on a hierarchy and form of power based on a gendered division of labor. Gendered relations arise out of a specific historical context. Social practices reflect the relationship between sexual division of labor and gendered social relations, their modalities, shape, and periodization. The work-health relationship is expressed in the gendered technical organization of work, the gendered socialization of work, and domestic labor. The period of 1917-58 reflects the capitalist influences. When women became wage earners, their management of household tasks was changed. Men took over the heavy tasks, and women performed tasks that required skill and patience. Work-related health impacts, such as deformed knees or severed fingers, and accidents varied with the task. Women adapted to work conditions. During the 1940s, female workers refused to join the collective protests of men for better wages and conditions. The dream of progress faded by 1964. After 1959, new gendered relations of production and reproduction emerged. Labor laws were passed; new machines were introduced. During 1965-70, the health issues were headaches, irritability, and anxiety. 1970-91 brought a hollowness of spirit and the search for an explanation for the violence they had experienced.

  19. Physics Division research and development

    Science.gov (United States)

    Hollen, G. Y.; Schappert, G. T.

    1994-07-01

    This report discusses its following topics: Recent Weapons-Physics Experiments on the Pegasus II Pulsed Power Facility; Operation of a Large-Scale Plasma Source Ion Implantation Experiment; Production of Charm and Beauty Mesons at Fermilab Sudbury Neutrino Observatory; P-Division's Essential Role in the Redirected Inertial Confinement Fusion Program; Trident Target Physics Program; Comparative Studies of Brain Activation with Magnetocephalography and Functional Magnetic Resonance Imaging; Cellular Communication, Interaction of G-Proteins, and Single-Photon Detection; Nuclear Magnetic Resonance Studies of Oxygen-doped La2CuO(4+delta) Thermoacoustic Engines; A Shipborne Raman Water-Vapor Lidar for the Central Pacific Experiment; Angara-5 Pinch Temperature Verification with Time-resolved Spectroscopy; Russian Collaborations on Megagauss Magnetic Fields and Pulsed-Power Applications; Studies of Energy Coupling from Underground Explosions; Trapping and Cooling Large Numbers of Antiprotons: A First Step Toward the Measurement of Gravity on Antimatter; and Nuclear-Energy Production Without a Long-Term High-Level Waste Stream.

  20. EDH 'Millionaire' in PS Division

    CERN Multimedia

    2001-01-01

    Christmas cheer! Left to right: Gerard Lobeau receives a bottle of Champagne from Derek Mathieson and Jurgen De Jonghe in recognition of EDH's millionth document. At 14:33 on Monday 3 December a technician in PS division, Gerard Lobeau, unwittingly became part of an important event in the life of CERN's Electronic Document Handling system (EDH). While ordering some pieces of aluminum for one of the PS's 10Mhz RF cavities, he created EDH document number 1,000,000. To celebrate the event Derek Mathieson (EDH Project Leader) and Jurgen De Jonghe (Original EDH Project Leader) presented Mr Lobeau with a bottle of champagne. As with 93% of material requests, Mr Lobeau's order was delivered within 24 hours. 'I usually never win anything' said Mr Lobeau as he accepted his prize, 'I initially though there may have been a problem with EDH when the document number had so many zeros in it, and was then surprised to get a phone call from you a few minutes later.' The EDH team had been monitoring the EDH document number ...

  1. 49 CFR 1242.03 - Made by accounting divisions.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 9 2010-10-01 2010-10-01 false Made by accounting divisions. 1242.03 Section 1242... accounting divisions. The separation shall be made by accounting divisions, where such divisions are maintained, and the aggregate of the accounting divisions reported for the quarter and for the year....

  2. Analytical Chemistry Division. Annual progress report for period ending December 31, 1981

    Energy Technology Data Exchange (ETDEWEB)

    Lyon, W. S. [ed.

    1982-04-01

    The functions of the Analytical Chemistry Division fall into three general categories: (1) analytical research, development, and implementation; (2) programmatic research, development and utilization; (3) technical support. The Division is organized into five major sections each of which may carry out any type of work falling into the thre categories mentioned above. Chapters 1 through 5 of this report highlight progress within the five sections which are: analytical methodology; mass and emission spectrometry; analytical technical support; bio/organic analysis section; and nuclear and radiochemical analysis. A short summary introduces each chapter to indicate work scope. Information about quality assurance and safety programs is presented in Chapter 6, along with a tabulation of analyses rendered. Chapter 7 covers supplementary activities. Chapter 8 is on presentation of research results (publications, articles reviewed or referred for periodicals). Approximately 56 articles, 31 proceedings publications and 33 reports have been published, and 119 oral presentations given during this reporting period.

  3. Quantizing Earth surface deformations

    Directory of Open Access Journals (Sweden)

    C. O. Bowin

    2015-03-01

    Full Text Available The global analysis of Bowin (2010 used the global 14 absolute Euler pole set (62 Myr history from Gripp and Gordon (1990 and demonstrated that plate tectonics conserves angular momentum. We herein extend that analysis using the more detailed Bird (2003 52 present-day Euler pole set (relative to a fixed Pacific plate for the Earth's surface, after conversion to absolute Euler poles. Additionally, new analytical results now provide new details on upper mantle mass anomalies in the outer 200 km of the Earth, as well as an initial quantizing of surface deformations.

  4. Space Deformations, Surface Deformations and the Opportunities In-Between

    Institute of Scientific and Technical Information of China (English)

    Daniel Cohen-Or

    2009-01-01

    In recent years we have witnessed a large interest in surface deformation techniques. This has been a reaction that can be attributed to the ability to develop techniques which are detail-preserving. Space deformation techniques, on the other hand, received less attention, but nevertheless they have many advantages over surface-based techniques. This paper explores the potential of these two approaches to deformation and discusses the opportunities that the fusion of the two may lead to.

  5. Engineering Physics and Mathematics Division progress report for period ending December 31, 1992

    Energy Technology Data Exchange (ETDEWEB)

    Ward, R.C.

    1993-05-01

    In this report, our research is described through abstracts of journal articles, technical reports, and presentations organized into sections following the five major operating units in the division: Mathematical Sciences, Intelligent Systems, Nuclear Data and Measurement Analysis, Nuclear Analysis and Shielding, and the Engineering Physics Information Centers. Each section begins with an introduction highlighting honors, awards, and significant research accomplishments in that unit during the reporting period.

  6. Beyond Desert Storm -- Conducting Intelligence Collection Management Operations in the Heavy Division

    Science.gov (United States)

    2009-02-13

    5 2 A. Division Tactical Operations Center Support Element (DTOCSE) Organization B. Technical Control and Analysis Element ( TCAE ... TCAE ) from the MI Battalion; while units have been conducting equipment fielding and unit reorganization since 1991, the Table of Organization and...for DTOCSE organization, Appendix B for TCAE organization, and Appendix C for ACE configuration and manning diagrams.) 4 The ACE/ASAS structure is

  7. Instrumentation and Controls Division Progress report, July 1, 1992--June 30, 1994

    Energy Technology Data Exchange (ETDEWEB)

    McDonald, D.W.

    1995-06-01

    The Instrumentation and Controls (I&C) Division serves a national laboratory, and as such has an expansive domain: science, industry, and national defense. The core mission is to support the scientific apparatus of the Laboratory and all of the systems that protect the safety and health of people and the environment. Progress is reported for the five sections: photonics and measurements systems, electronic systems, signal processing, controls and systems integration, and technical support.

  8. Experimental Facilities Division progress report 1996--97

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-04-01

    This progress report summarizes the activities of the Experimental Facilities Division (XFD) in support of the users of the Advanced Photon Source (APS), primarily focusing on the past year of operations. In September 1996, the APS began operations as a national user facility serving the US community of x-ray researchers from private industry, academic institutions, and other research organizations. The start of operations was about three months ahead of the baseline date established in 1988. This report is divided into the following sections: (1) overview; (2) user operations; (3) user administration and technical support; (4) R and D in support of view operations; (5) collaborative research; and (6) long-term strategic plans for XFD.

  9. Energy Division annual progress report for period ending September 30, 1991

    Energy Technology Data Exchange (ETDEWEB)

    Stone, J.N. (ed.)

    1992-04-01

    The Energy Division is one of 17 research divisions at Oak Ridge Laboratory. Its goals and accomplishments are described in this annual progress report for FY 1991. The division's total expenditures in FY 1991 were $39.1 million. The work is supported by the US Department of Energy, US Department of Defense, many other federal agencies, and some private organizations. Disciplines of the 124 technical staff members include engineering, social sciences, physical and life sciences, and mathematics and statistics. The Energy Division's programmatic activities focus on three major areas: (1) analysis and assessment, (2) energy conservation technologies, and (3) military transportation systems. Analysis and assessment activities cover energy and resource analysis, the preparation of environmental assessments and impact statements, research on waste management, analysis of emergency preparedness for natural and technological disasters, analysis of the energy and environmental needs of developing countries, technology transfer, and analysis of civilian transportation. Energy conservation technologies include electric power systems, building equipment (thermally activated heat pumps, advanced refrigeration systems, novel cycles), building envelopes (walls, foundations, roofs, attics, and materials), and technical issues for improving energy efficiency in existing buildings. Military transportation systems concentrate on research for sponsors within the US military on improving the efficiency of military deployment, scheduling, and transportation coordination.

  10. Formation and subdivision of deformation structures during plastic deformation

    DEFF Research Database (Denmark)

    Jakobsen, B.; Poulsen, H.F.; Lienert, U.;

    2006-01-01

    During plastic deformation of metals and alloys, dislocations arrange in ordered patterns. How and when these self-organization processes take place have remained elusive, because in situ observations have not been feasible. We present an x-ray diffraction method that provided data on the dynamics...... of individual, deeply embedded dislocation structures. During tensile deformation of pure copper, dislocation-free regions were identified. They showed an unexpected intermittent dynamics, for example, appearing and disappearing with proceeding deformation and even displaying transient splitting behavior....... Insight into these processes is relevant for an understanding of the strength and work-hardening of deformed materials....

  11. Predicting division plane position and orientation.

    Science.gov (United States)

    Minc, Nicolas; Piel, Matthieu

    2012-04-01

    Predicting cellular behavior is a major challenge in cell and developmental biology. Since the late nineteenth century, empirical rules have been formulated to predict the position and orientation of mitotic cleavage planes in plant and animal cells. Here, we review the history of division plane orientation rules and discuss recent experimental and theoretical studies that refine these rules and provide mechanistic insights into how division can be predicted. We describe why some of these rules may better apply to certain cell types and developmental contexts and discuss how they could be integrated in the future to allow the prediction of division positioning in tissues.

  12. Earth Sciences Division collected abstracts: 1979

    Energy Technology Data Exchange (ETDEWEB)

    Henry, A.L.; Schwartz, L.L.

    1980-04-30

    This report is a compilation of abstracts of papers, internal reports, and talks presented during 1979 at national and international meetings by members of the Earth Sciences Division, Lawrence Livermore Laboratory. The arrangement is alphabetical (by author). For a given report, a bibliographic reference appears under the name of each coauthor, but the abstract iself is given only under the name of the first author or the first Earth Sciences Division author. A topical index at the end of the report provides useful cross references, while indicating major areas of research interest in the Earth Sciences Division.

  13. Asymmetric stem cell division: lessons from Drosophila.

    Science.gov (United States)

    Wu, Pao-Shu; Egger, Boris; Brand, Andrea H

    2008-06-01

    Asymmetric cell division is an important and conserved strategy in the generation of cellular diversity during animal development. Many of our insights into the underlying mechanisms of asymmetric cell division have been gained from Drosophila, including the establishment of polarity, orientation of mitotic spindles and segregation of cell fate determinants. Recent studies are also beginning to reveal the connection between the misregulation of asymmetric cell division and cancer. What we are learning from Drosophila as a model system has implication both for stem cell biology and also cancer research.

  14. Chemical Sciences Division annual report 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-01

    The division is one of ten LBL research divisions. It is composed of individual research groups organized into 5 scientific areas: chemical physics, inorganic/organometallic chemistry, actinide chemistry, atomic physics, and chemical engineering. Studies include structure and reactivity of critical reaction intermediates, transients and dynamics of elementary chemical reactions, and heterogeneous and homogeneous catalysis. Work for others included studies of superconducting properties of high-{Tc} oxides. In FY 1994, the division neared completion of two end-stations and a beamline for the Advanced Light Source, which will be used for combustion and other studies. This document presents summaries of the studies.

  15. Biology and Medicine Division: Annual report 1986

    Energy Technology Data Exchange (ETDEWEB)

    1987-04-01

    The Biology and Medicine Division continues to make important contributions in scientific areas in which it has a long-established leadership role. For 50 years the Division has pioneered in the application of radioisotopes and charged particles to biology and medicine. There is a growing emphasis on cellular and molecular applications in the work of all the Division's research groups. The powerful tools of genetic engineering, the use of recombinant products, the analytical application of DNA probes, and the use of restriction fragment length polymorphic DNA are described and proposed for increasing use in the future.

  16. Chemical and Laser Sciences Division annual report 1989

    Energy Technology Data Exchange (ETDEWEB)

    Haines, N. (ed.)

    1990-06-01

    The Chemical and Laser Sciences Division Annual Report includes articles describing representative research and development activities within the Division, as well as major programs to which the Division makes significant contributions.

  17. Rotary deformity in degenerative spondylolisthesis

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Sung Gwon; Kim, Jeong; Kho, Hyen Sim; Yun, Sung Su; Oh, Jae Hee; Byen, Ju Nam; Kim, Young Chul [Chosun University College of Medicine, Gwangju (Korea, Republic of)

    1994-05-15

    We studied to determine whether the degenerative spondylolisthesis has rotary deformity in addition to forward displacement. We have made analysis of difference of rotary deformity between the 31 study groups of symptomatic degenerative spondylolisthesis and 31 control groups without any symptom, statistically. We also reviewed CT findings in 15 study groups. The mean rotary deformity in study groups was 6.1 degree(the standard deviation is 5.20), and the mean rotary deformity in control groups was 2.52 degree(the standard deviation is 2.16)(p < 0.01). The rotary deformity can be accompanied with degenerative spondylolisthesis. We may consider the rotary deformity as a cause of symptomatic degenerative spondylolisthesis in case that any other cause is not detected.

  18. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Brizard, Alain J

    2009-12-31

    Final Technical Report for U.S. Department of Energy Grant No. DE-FG02-09ER55005 Nonlinear FLR Effects in Reduced Fluid Models Alain J. Brizard, Saint Michael's College The above-mentioned DoE grant was used to support research activities by the PI during a sabbatical leave from Saint Michael's College in 2009. The major focus of the work was the role played by guiding-center and gyrocenter (linear and nonlinear) polarization and magnetization effects in understanding transport processes in turbulent magnetized plasmas. The theoretical tools used for this work include Lie-transform perturbation methods and Lagrangian (variational) methods developed by the PI in previous work. The present final technical report lists (I) the peer-reviewed publications that were written based on work funded by the Grant; (II) invited and contributed conference presentations during the period funded by the Grant; and (III) seminars presented during the period funded by the Grant. I. Peer-reviewed Publications A.J. Brizard and N. Tronko, 2011, Exact momentum conservation for the gyrokinetic Vlasov- Poisson equations, Physics of Plasmas 18 , 082307:1-14 [http://dx.doi.org/10.1063/1.3625554 ]. J. Decker, Y. Peysson, A.J. Brizard, and F.-X. Duthoit, 2010, Orbit-averaged guiding-center Fokker-Planck operator for numerical applications, Physics of Plasmas 17, 112513:1-12 [http://dx.doi.org/10.1063/1.3519514]. A.J. Brizard, 2010, Noether derivation of exact conservation laws for dissipationless reduced fluid models, Physics of Plasmas 17, 112503:1-8 [http://dx.doi.org/10.1063/1.3515303]. F.-X. Duthoit, A.J. Brizard, Y. Peysson, and J. Decker, 2010, Perturbation analysis of trapped particle dynamics in axisymmetric dipole geometry, Physics of Plasmas 17, 102903:1-9 [http://dx.doi.org/10.1063/1.3486554]. A.J. Brizard, 2010, Exact energy conservation laws for full and truncated nonlinear gyrokinetic equations, Physics of Plasmas 17, 042303:1-11 [http://dx.doi.org/10.1063/1.3374428]. A

  19. Deformation analysis: The Fredericton approach

    OpenAIRE

    Vrečko, Anja; Ambrožič, Tomaž

    2013-01-01

    In this article, the Fredericton approach to deformation analysis is presented. It is possible to use several deformation models to determine the differences between the geodetic observations or between the coordinates of points in geodetic network in more epochs. The most appropriate deformation model has been chosen based on statistical testing and available information about dynamics at the area of interest. First, a theoretical background of the approach ...

  20. Non-bicolourable Finite Configurations of Rays and Their Deformations

    CERN Document Server

    Ruuge, Artur

    2009-01-01

    A new infinite family of examples of finite non-bicolorable configurations of rays in Hilbert space is described. Such configurations appear in the analysis of quantum mechanics in terms of Bell's inequalities and Kochen-Specker theorem and illustrate that there is no measurable space in the background of the probability model of a quantum system. The mentioned examples are naturally parametrized by a positive integer divisible by four and by several complex-valued parameters, whose number depends on this integer. In order to compare two configurations with the same number of rays, a notion of deformation of a configuration is introduced. The constructed examples are then interpreted as obtained by way of deformations.

  1. Deformable paper origami optoelectronic devices

    KAUST Repository

    He, Jr-Hau

    2017-01-19

    Deformable optoelectronic devices are provided, including photodetectors, photodiodes, and photovoltaic cells. The devices can be made on a variety of paper substrates, and can include a plurality of fold segments in the paper substrate creating a deformable pattern. Thin electrode layers and semiconductor nanowire layers can be attached to the substrate, creating the optoelectronic device. The devices can be highly deformable, e.g. capable of undergoing strains of 500% or more, bending angles of 25° or more, and/or twist angles of 270° or more. Methods of making the deformable optoelectronic devices and methods of using, e.g. as a photodetector, are also provided.

  2. DNR Division of Enforcement Officer Patrol Areas

    Data.gov (United States)

    Minnesota Department of Natural Resources — This theme shows the DNR Division of Enforcement Office Patrol Areas as of January 1, 2003. Patrol areas were defined and verified by Patrol Officers during the fall...

  3. Spatial Divisions and Fertility in India

    Directory of Open Access Journals (Sweden)

    Vijayan Pillai

    2012-01-01

    Full Text Available The Indian subcontinent can be divided into four geographical divisions. In this paper, we characterize three of the four divisions; the Northern Plains, the Deccan Plateau, and the Northern Mountains or the Himalayan as regions with dissimilar climatic and physical resources. It is argued that human adaptations to these variations would be varied by differences in social organization of production and consumption resulting in differences in fertility differences across the three divisions. We found significant differences in the median age at motherhood as well as in the total family size. The effects of the three selected fertility determinants, age at marriage, years of woman's education, and level of child loss on family size also varied significantly across the three divisions. There is considerable homogeneity with respect to fertility levels within the zones considered in this study.

  4. About DCP | Division of Cancer Prevention

    Science.gov (United States)

    The Division of Cancer Prevention (DCP) is the primary unit of the National Cancer Institute devoted to cancer prevention research. DCP provides funding and administrative support to clinical and laboratory researchers, community and multidisciplinary teams, and collaborative scientific networks. |

  5. Civil Remedies Division Administrative Law Judge Decisions

    Data.gov (United States)

    U.S. Department of Health & Human Services — Decisions issued by Administrative Law Judges of the Departmental Appeals Board's Civil Remedies Division concerning fraud and abuse determinations by the Office of...

  6. Chemical Sciences Division: Annual report 1992

    Energy Technology Data Exchange (ETDEWEB)

    1993-10-01

    The Chemical Sciences Division (CSD) is one of twelve research Divisions of the Lawrence Berkeley Laboratory, a Department of Energy National Laboratory. The CSD is composed of individual groups and research programs that are organized into five scientific areas: Chemical Physics, Inorganic/Organometallic Chemistry, Actinide Chemistry, Atomic Physics, and Physical Chemistry. This report describes progress by the CSD for 1992. Also included are remarks by the Division Director, a description of work for others (United States Office of Naval Research), and appendices of the Division personnel and an index of investigators. Research reports are grouped as Fundamental Interactions (Photochemical and Radiation Sciences, Chemical Physics, Atomic Physics) or Processes and Techniques (Chemical Energy, Heavy-Element Chemistry, and Chemical Engineering Sciences).

  7. Overlapped frequency-time division multiplexing

    Institute of Scientific and Technical Information of China (English)

    JIANG Hui; LI Dao-ben

    2009-01-01

    A technique named overlapped frequency-time division multiplexing (OVFTDM)) is proposed in this article. The technique is derived from Nyquist system and frequency-time division multiplexing system. When the signals are compactly overlapped without the orthogonality in time domain, the technique is named overlapped time division multiplexing (OVTDM), whereas when signals are compactly overlapped without the orthogonality in frequency domain, the technique is called overlapped frequency division multiplexing (OVFDM). To further improve spectral efficiency, the OVFTDM in which signals are overlapped both in frequency domain and in time domain is explored. OVFTDM does not depend on orthogonality whatever in time domain or in frequency domain like Nyquist system or OFDM system, but on the convolutional constraint relationship among signals. Therefore, not only the spectral efficiency but also the reliability is improved. The simulations verify the validity of this theory.

  8. Environmental Research Division's Data Access Program (ERDDAP)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — ERDDAP (the Environmental Research Division's Data Access Program) is a data server that gives you a simple, consistent way to download subsets of scientific...

  9. [Diagnosticum of abnormalities of plant meiotic division].

    Science.gov (United States)

    Shamina, N V

    2006-01-01

    Abnormalities of plant meiotic division leading to abnormal meiotic products are summarized schematically in the paper. Causes of formation of monads, abnormal diads, triads, pentads, polyads, etc. have been observed in meiosis with both successive and simultaneous cytokinesis.

  10. Earth Sciences Division, collected abstracts, 1978

    Energy Technology Data Exchange (ETDEWEB)

    Taasevigen, D.K.; Henry, A.L.; Madsen, S.K.

    1979-03-30

    Abstracts of papers, internal reports, and talks presented during 1978 at national and international meetings by members of the Earth Sciences Division of the Lawrence Livermore Laboratory are compiled. The arrangement is alphabetical (by author). For any given report, a bibliographic reference appears under the name of each coauthor. A topical index at the end provides useful cross references, while indicating major areas of research interest in the Earth Sciences Division.

  11. Weapons Experiments Division Explosives Operations Overview

    Energy Technology Data Exchange (ETDEWEB)

    Laintz, Kenneth E. [Los Alamos National Laboratory

    2012-06-19

    Presentation covers WX Division programmatic operations with a focus on JOWOG-9 interests. A brief look at DARHT is followed by a high level overview of explosives research activities currently being conducted within in the experimental groups of WX-Division. Presentation covers more emphasis of activities and facilities at TA-9 as these efforts have been more traditionally aligned with ongoing collaborative explosive exchanges covered under JOWOG-9.

  12. Nuclear Science Division: 1993 Annual report

    Energy Technology Data Exchange (ETDEWEB)

    Myers, W.D. [ed.

    1994-06-01

    This report describes the activities of the Nuclear Science Division for the 1993 calendar year. This was another significant year in the history of the Division with many interesting and important accomplishments. Activities for the following programs are covered here: (1) nuclear structure and reactions program; (2) the Institute for Nuclear and Particle Astrophysics; (3) relativistic nuclear collisions program; (4) nuclear theory program; (5) nuclear data evaluation program, isotope project; and (6) 88-inch cyclotron operations.

  13. Stationary infinitely divisible processes

    DEFF Research Database (Denmark)

    Barndorff-Nielsen, Ole E.

    Several recent strands of work has led to the consideration of various types of continuous time stationary and infinitely divisible processes. A review of these types, with some new results, is presented.......Several recent strands of work has led to the consideration of various types of continuous time stationary and infinitely divisible processes. A review of these types, with some new results, is presented....

  14. Earth Sciences Division annual report 1989

    Energy Technology Data Exchange (ETDEWEB)

    1990-06-01

    This Annual Report presents summaries of selected representative research activities from Lawrence Berkeley Laboratory grouped according to the principal disciplines of the Earth Sciences Division: Reservoir Engineering and Hydrology, Geology and Geochemistry, and Geophysics and Geomechanics. We are proud to be able to bring you this report, which we hope will convey not only a description of the Division's scientific activities but also a sense of the enthusiasm and excitement present today in the Earth Sciences.

  15. Medical Sciences Division report for 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-12-31

    This year`s Medical Sciences Division (MSD) Report is organized to show how programs in our division contribute to the core competencies of Oak Ridge Institute for Science and Education (ORISE). ORISE`s core competencies in education and training, environmental and safety evaluation and analysis, occupational and environmental health, and enabling research support the overall mission of the US Department of Energy (DOE).

  16. The fencing problem and Coleochaete cell division.

    Science.gov (United States)

    Wang, Yuandi; Dou, Mingya; Zhou, Zhigang

    2015-03-01

    The findings in this study suggest that the solution of a boundary value problem for differential equation system can be used to discuss the fencing problem in mathematics and Coleochaete, a green algae, cell division. This differential equation model in parametric expression is used to simulate the two kinds of cell division process, one is for the usual case and the case with a "dead" daughter cell.

  17. On K sub 2 of division algebras

    CERN Document Server

    Guo Xue Jun; Qin Hou Rong

    2003-01-01

    In this paper, it is proved that if F is a global field or a local field, then every element of K sub 2 D is generated by symbols of form left brace a, b right brace with an element of F*, b is an element of D*, where D is a central division algebra over F. The tame kernel and wild kernel of central division algebra over F are expressed explicitly.

  18. Weapons Experiments Division Explosives Operations Overview

    Energy Technology Data Exchange (ETDEWEB)

    Laintz, Kenneth E. [Los Alamos National Laboratory

    2012-06-19

    Presentation covers WX Division programmatic operations with a focus on JOWOG-9 interests. A brief look at DARHT is followed by a high level overview of explosives research activities currently being conducted within in the experimental groups of WX-Division. Presentation covers more emphasis of activities and facilities at TA-9 as these efforts have been more traditionally aligned with ongoing collaborative explosive exchanges covered under JOWOG-9.

  19. Earth Sciences Division collected abstracts: 1980

    Energy Technology Data Exchange (ETDEWEB)

    Henry, A.L.; Hornady, B.F. (eds.)

    1981-10-15

    This report is a compilation of abstracts of papers, reports, and talks presented during 1980 at national and international meetings by members of the Earth Sciences Division, Lawrence Livermore National Laboratory. The arrangement is alphabetical (by author). For a given report, a bibliographic reference appears under the name of each coauthor, but the abstract itself is given only under the name of the first author (indicated in capital letters) or the first Earth Sciences Division author.

  20. Divisibility properties for C*-algebras

    DEFF Research Database (Denmark)

    Robert, Leonel; Rørdam, Mikael

    2013-01-01

    We consider three notions of divisibility in the Cuntz semigroup of a C*-algebra, and show how they reflect properties of the C*-algebra. We develop methods to construct (simple and non-simple) C*-algebras with specific divisibility behaviour. As a byproduct of our investigations, we show...... that there exists a sequence (An) of simple unital infinite dimensional C*-algebras such that the product ∏n=1∞ An has a character....

  1. Modeling forest industry in Sweden. Technical documentation

    Energy Technology Data Exchange (ETDEWEB)

    Nystroem, Ingrid [Chalmers Univ. of Technology, Goeteborg (Sweden). Div. of Energy Systems Technology

    2001-02-01

    At the division of Energy Systems Technology at Chalmers University of Technology a study of energy and material flows in the Swedish forest industry has been made. The study includes analysis of potential long-term development paths for the forest industry and their impact on energy flows and energy related material flows in the forest industry. Within this study a forest industry model and a number of forest industry scenarios have been developed. This report presents a technical description of the constructed model, detailed scenario data and complete results tables for the scenario runs. The report does not include any discussion or analysis of model, input data or results.

  2. Continuum Mechanics Based Bi-linear Shear Deformable Shell Element Using Absolute Nodal Coordinate Formulation

    Science.gov (United States)

    2014-03-07

    the convergent solution in the case of the continuum mechanics based bi- linear shear deformable ANCF shell element. 5.3 Slit Annular Plate Subjected...UNCLASSIFIED: Distribution Statement A. Approved for public release. #24515 CONTINUUM MECHANICS BASED BI- LINEAR SHEAR DEFORMABLE SHELL ELEMENT...MAR 2014 2. REPORT TYPE Technical Report 3. DATES COVERED 07-01-2014 to 04-03-2014 4. TITLE AND SUBTITLE CONTINUUM MECHANICS BASED BI- LINEAR

  3. Polarity in plant asymmetric cell division: Division orientation and cell fate differentiation

    OpenAIRE

    Shao, Wanchen; Dong, Juan

    2016-01-01

    Asymmetric cell division (ACD) is universally required for the development of multicellular organisms. Unlike animal cells, plant cells have a rigid cellulosic extracellular matrix, the cell wall, which provides physical support and forms communication routes. This fundamental difference leads to some unique mechanisms in plants for generating asymmetries during cell division. However, plants also utilize intrinsically polarized proteins to regulate asymmetric signaling and cell division, a s...

  4. 2013 Technical Roundtable

    Science.gov (United States)

    On December 9, 2013, EPA reconvened the study’s Technical Roundtable. Subject-matter experts discussed the outcomes of the 2013 Technical Workshops, stakeholder engagement, and plans for draft assessment report.

  5. Technical Assistance Plan (TAP)

    Science.gov (United States)

    A Technical Assistance Plan (TAP) enables community groups to retain the services of an independent technical advisor and to provide resources for a community group to help inform other community members about site decisions.

  6. Technical training - places available

    CERN Multimedia

    2013-01-01

    If you would like more information on a course, or have any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Elise Romero, Technical Training Administration (Tel: 74924)

  7. Technical training: places available

    CERN Multimedia

    2014-01-01

    If you would like more information on a course, or have any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Marie Lahchimi, Technical Training Administration (Tel: 74924)

  8. Technical training: places available

    CERN Multimedia

    2013-01-01

    If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Elise Romero, Technical Training Administration (Tel: 74924)

  9. Technical training: places available

    CERN Multimedia

    2013-01-01

    If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Elise Romero, Technical Training Administration (Tél : 74924)  

  10. Technical training: places available

    CERN Multimedia

    2014-01-01

    If you would like more information on a course, or have any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Elise Romero, Technical Training Administration (Tel: 74924)

  11. Physics Division Argonne National Laboratory description of the programs and facilities.

    Energy Technology Data Exchange (ETDEWEB)

    Thayer, K.J. [ed.

    1999-05-24

    programs for performing thesis research. The Division in early 1999 has 105 full-time members [36 regular scientific (Ph.D. level) staff, 19 postdoctoral appointees and visitors, and 50 technical, administrative, and secretarial personnel] and an annual operating budget of about $17 million. On average, the Division annually supports 50 graduate and undergraduate students.

  12. Permanent deformation of asphalt mixes

    NARCIS (Netherlands)

    Muraya, P.M.

    2007-01-01

    This dissertation describes the results of a research that was conducted on the permanent deformation of asphalt mixtures. Central to this research was the separate characterization of the contribution of the aggregate skeleton and the bituminous mortar towards resistance to permanent deformation. T

  13. Deformation of the ABJM Theory

    OpenAIRE

    Faizal, Mir

    2012-01-01

    In this paper we analyse the ABJM theory on deformed spacetime. We show that this theory reduces to a deformed super-Yang-Mills theory when one of the scalar superfields is given a non-vanishing vacuum expectation value. Our analyse is done in N=1 superspace formulism.

  14. Fraktalnist deformational relief polycrystalline aluminum

    Directory of Open Access Journals (Sweden)

    М.В. Карускевич

    2006-02-01

    Full Text Available  The possibility of the fractal geometry method application for the analisys of surface deformation structures under cyclic loading is presented.It is shown, that deformation relief of the alclad aluminium alloyes meets the criteria of the fractality. For the fractal demention estimation the method of  “box-counting”can be applied.

  15. Metastable vacua and geometric deformations

    CERN Document Server

    Amariti, A; Girardello, L; Mariotti, A

    2008-01-01

    We study the geometric interpretation of metastable vacua for systems of D3 branes at non isolated toric deformable singularities. Using the L^{aba} examples, we investigate the relations between the field theoretic susy breaking and restoration and the complex deformations of the CY singularities.

  16. Transportation Technical Environmental Information Center index

    Energy Technology Data Exchange (ETDEWEB)

    Davidson, C. A.; Foley, J. T.

    1980-10-01

    In an effort to determine the environmental intensities to which energy materials in transit may be exposed, a Data Center of technical environmental information has been established by Sandia National Laboratories, Division 5523, for the DOE Office of Transportation Fuel Storage. This document is an index which can be used to request data of interest. Access to the information held is not limited to Sandia personnel. The purpose of the Transportation Technical Environmental Information Center is to collect, analyze, store, and make available descriptions of the environment of transportation expressed in engineering terms. The data stored in the Center are expected to be useful in a variety of transportation related analyses. Formulations of environmental criteria for shipment of cargo, risk assessments, and detailed structural analyses of shipping containers are examples where these data have been applied. For purposes of indexing and data retrieval, the data are catalogued under two major headings: Normal and Abnormal Environments.

  17. Deformation of Man Made Objects

    KAUST Repository

    Ibrahim, Mohamed

    2012-07-01

    We introduce a framework for 3D object deformation with primary focus on man-made objects. Our framework enables a user to deform a model while preserving its defining characteristics. Moreover, our framework enables a user to set constraints on a model to keep its most significant features intact after the deformation process. Our framework supports a semi-automatic constraint setting environment, where some constraints could be automatically set by the framework while others are left for the user to specify. Our framework has several advantages over some state of the art deformation techniques in that it enables a user to add new features to the deformed model while keeping its general look similar to the input model. In addition, our framework enables the rotation and extrusion of different parts of a model.

  18. Making Deformable Template Models Operational

    DEFF Research Database (Denmark)

    Fisker, Rune

    2000-01-01

    Deformable template models are a very popular and powerful tool within the field of image processing and computer vision. This thesis treats this type of models extensively with special focus on handling their common difficulties, i.e. model parameter selection, initialization and optimization...... published during the Ph.D. project. To put these articles into the general context of deformable template models and to pass on an overview of the deformable template model literature, the thesis starts with a compact survey of the deformable template model literature with special focus on representation....... A proper handling of the common difficulties is essential for making the models operational by a non-expert user, which is a requirement for intensifying and commercializing the use of deformable template models. The thesis is organized as a collection of the most important articles, which has been...

  19. Teaching Technical Writing - Towards Technical Writing

    DEFF Research Database (Denmark)

    Kastberg, Peter

    2000-01-01

    In this paper I will present key aspects of the curriculum for the university degree in technical translation that I have designed for and subsequently implemented at the German Department of the Aarhus School of Business, Denmark. My starting point will be a critical discussion of the norm...... that used to govern what the quality of an LSP text should be as opposed to the standpoint, which I advocate. By way of summing up, I will show how a university curriculum is designed so that - upon graduation - the technical translator could also be methodological quite well suited to take on the challenge...... of technical writing....

  20. The History of Metals and Ceramics Division

    Energy Technology Data Exchange (ETDEWEB)

    Craig, D.F.

    1999-01-01

    The division was formed in 1946 at the suggestion of Dr. Eugene P. Wigner to attack the problem of the distortion of graphite in the early reactors due to exposure to reactor neutrons, and the consequent radiation damage. It was called the Metallurgy Division and assembled the metallurgical and solid state physics activities of the time which were not directly related to nuclear weapons production. William A. Johnson, a Westinghouse employee, was named Division Director in 1946. In 1949 he was replaced by John H Frye Jr. when the Division consisted of 45 people. He was director during most of what is called the Reactor Project Years until 1973 and his retirement. During this period the Division evolved into three organizational areas: basic research, applied research in nuclear reactor materials, and reactor programs directly related to a specific reactor(s) being designed or built. The Division (Metals and Ceramics) consisted of 204 staff members in 1973 when James R. Weir, Jr., became Director. This was the period of the oil embargo, the formation of the Energy Research and Development Administration (ERDA) by combining the Atomic Energy Commission (AEC) with the Office of Coal Research, and subsequent formation of the Department of Energy (DOE). The diversification process continued when James O. Stiegler became Director in 1984, partially as a result of the pressure of legislation encouraging the national laboratories to work with U.S. industries on their problems. During that time the Division staff grew from 265 to 330. Douglas F. Craig became Director in 1992.

  1. Energy Technology Division research summary - 1999.

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-31

    The Energy Technology Division provides materials and engineering technology support to a wide range of programs important to the US Department of Energy. As shown on the preceding page, the Division is organized into ten sections, five with concentrations in the materials area and five in engineering technology. Materials expertise includes fabrication, mechanical properties, corrosion, friction and lubrication, and irradiation effects. Our major engineering strengths are in heat and mass flow, sensors and instrumentation, nondestructive testing, transportation, and electromechanics and superconductivity applications. The Division Safety Coordinator, Environmental Compliance Officers, Quality Assurance Representative, Financial Administrator, and Communication Coordinator report directly to the Division Director. The Division Director is personally responsible for cultural diversity and is a member of the Laboratory-wide Cultural Diversity Advisory Committee. The Division's capabilities are generally applied to issues associated with energy production, transportation, utilization, or conservation, or with environmental issues linked to energy. As shown in the organization chart on the next page, the Division reports administratively to the Associate Laboratory Director (ALD) for Energy and Environmental Science and Technology (EEST) through the General Manager for Environmental and Industrial Technologies. While most of our programs are under the purview of the EEST ALD, we also have had programs funded under every one of the ALDs. Some of our research in superconductivity is funded through the Physical Research Program ALD. We also continue to work on a number of nuclear-energy-related programs under the ALD for Engineering Research. Detailed descriptions of our programs on a section-by-section basis are provided in the remainder of this book.

  2. 76 FR 64083 - Reliability Technical Conference; Notice of Technical Conference

    Science.gov (United States)

    2011-10-17

    ... Energy Regulatory Commission Reliability Technical Conference; Notice of Technical Conference Take notice that the Federal Energy Regulatory Commission will hold a Technical Conference on Tuesday, November 29... addressing risks to reliability that were identified in earlier Commission technical conferences....

  3. LocZ Is a New Cell Division Protein Involved in Proper Septum Placement in Streptococcus pneumoniae

    Science.gov (United States)

    Holečková, Nela; Molle, Virginie; Buriánková, Karolína; Benada, Oldřich; Kofroňová, Olga; Ulrych, Aleš; Branny, Pavel

    2014-01-01

    ABSTRACT How bacteria control proper septum placement at midcell, to guarantee the generation of identical daughter cells, is still largely unknown. Although different systems involved in the selection of the division site have been described in selected species, these do not appear to be widely conserved. Here, we report that LocZ (Spr0334), a newly identified cell division protein, is involved in proper septum placement in Streptococcus pneumoniae. We show that locZ is not essential but that its deletion results in cell division defects and shape deformation, causing cells to divide asymmetrically and generate unequally sized, occasionally anucleated, daughter cells. LocZ has a unique localization profile. It arrives early at midcell, before FtsZ and FtsA, and leaves the septum early, apparently moving along with the equatorial rings that mark the future division sites. Consistently, cells lacking LocZ also show misplacement of the Z-ring, suggesting that it could act as a positive regulator to determine septum placement. LocZ was identified as a substrate of the Ser/Thr protein kinase StkP, which regulates cell division in S. pneumoniae. Interestingly, homologues of LocZ are found only in streptococci, lactococci, and enterococci, indicating that this close phylogenetically related group of bacteria evolved a specific solution to spatially regulate cell division. PMID:25550321

  4. Intracellular viscoelasticity of HeLa cells during cell division studied by video particle-tracking microrheology.

    Science.gov (United States)

    Chen, Yin-Quan; Kuo, Chia-Yu; Wei, Ming-Tzo; Wu, Kelly; Su, Pin-Tzu; Huang, Chien-Shiou; Chiou, Arthur

    2014-01-01

    Cell division plays an important role in regulating cell proliferation and differentiation. It is managed by a complex sequence of cytoskeleton alteration that induces dividing cells to change their morphology to facilitate their division. The change in cytoskeleton structure is expected to affect the intracellular viscoelasticity, which may also contribute to cellular dynamic deformation during cell division. However, the intracellular viscoelasticity during cell division is not yet well understood. In this study, we injected 100-nm (diameter) carboxylated polystyrene beads into the cytoplasm of HeLa cells and applied video particle tracking microrheology to measure their intracellular viscoelasticity at different phases during cell division. The Brownian motion of the intracellular nanoprobes was analyzed to compute the viscoelasticity of HeLa cells in terms of the elastic modulus and viscous modulus as a function of frequency. Our experimental results indicate that during the course of cell division, both intracellular elasticity and viscosity increase in the transition from the metaphase to the anaphase, plausibly due to the remodeling of cytoskeleton and redistributions of molecular motors, but remain approximately the same from the anaphase to the telophase.

  5. Control of deflection deformation of plate-shape castings in solidification

    Institute of Scientific and Technical Information of China (English)

    郑贤淑; 金英达

    2003-01-01

    The deformation mechanism during the solidification was analyzed based on the experimental results ofthe castings. An approximate quadratic differential equation and its discrete model of calculation deflection were pro-posed. The model indicates that the key factors leading to the deflection deformation are the thermal bending mo-ment M and the flexural rigidity E.J. The smaller the former and the larger the latter is, the smaller the deflectiondeformation will be. The experiments are carried out at various technical conditions, and their results appear good a-greement with calculation ones. A method was proposed to predict and control the casting deformation.

  6. Environmental Sciences Division Groundwater Program Office. Annual report, 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-30

    This first edition of the Martin Marietta Energy Systems, Inc., (Energy Systems) Groundwater Program Annual Report summarizes the work carried out by the Energy Systems GWPO for fiscal year (FY) 1993. This introductory section describes the GWPO`s staffing, organization, and funding sources. The GWPO is responsible for coordination and oversight for all components of the groundwater program at the three Oak Ridge facilities [ORNL, the Oak Ridge Y-12 Plant, and the Oak Ridge K-25 Site], and the PGDP and PORTS, respectively. Several years ago, Energy systems senior management recognized that the manner in which groundwater activities were conducted at the five facilities could result in unnecessary duplication of effort, inadequate technical input to decisions related to groundwater issues, and could create a perception within the regulatory agencies of a confusing and inconsistent approach to groundwater issues at the different facilities. Extensive interactions among management from Environmental Compliance, Environmental Restoration (ER), Environmental Sciences Division, Environmental Safety and Health, and the five facilities ultimately led to development of a net technical umbrella organization for groundwater. On April 25, 1991, the GWPO was authorized to be set up within ORNL thereby establishing a central coordinating office that would develop a consistent technical and administrative direction for the groundwater programs of all facilities and result in compliance with all relevant U.S. Environmental Protection Agency (EPA) regulations such as RCRA and Comprehensive Environmental Restoration, Compensation and Liability Act (CERCLA) as well as U.S. Department of Energy (DOE) regulations and orders. For example, DOE Order 5400.1, issued on November 9, 1988, called for each DOE facility to develop an environmental monitoring program for all media (e.g., air, surface water, and groundwater).

  7. 7 CFR 2.34 - Director, National Appeals Division.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 1 2010-01-01 2010-01-01 false Director, National Appeals Division. 2.34 Section 2.34... Heads § 2.34 Director, National Appeals Division. The Director, National Appeals Division, under the... officers and other employees as are necessary for the administration of the activities of the Division....

  8. Control of apoptosis by asymmetric cell division.

    Directory of Open Access Journals (Sweden)

    Julia Hatzold

    2008-04-01

    Full Text Available Asymmetric cell division and apoptosis (programmed cell death are two fundamental processes that are important for the development and function of multicellular organisms. We have found that the processes of asymmetric cell division and apoptosis can be functionally linked. Specifically, we show that asymmetric cell division in the nematode Caenorhabditis elegans is mediated by a pathway involving three genes, dnj-11 MIDA1, ces-2 HLF, and ces-1 Snail, that directly control the enzymatic machinery responsible for apoptosis. Interestingly, the MIDA1-like protein GlsA of the alga Volvox carteri, as well as the Snail-related proteins Snail, Escargot, and Worniu of Drosophila melanogaster, have previously been implicated in asymmetric cell division. Therefore, C. elegans dnj-11 MIDA1, ces-2 HLF, and ces-1 Snail may be components of a pathway involved in asymmetric cell division that is conserved throughout the plant and animal kingdoms. Furthermore, based on our results, we propose that this pathway directly controls the apoptotic fate in C. elegans, and possibly other animals as well.

  9. Evolution of the chloroplast division machinery

    Institute of Scientific and Technical Information of China (English)

    Hongbo GAO; Fuli GAO

    2011-01-01

    Chloroplasts are photosynthetic organelles derived from endosymbiotic cyanobacteria during evolution.Dramatic changes occurred during the process of the formation and evolution of chloroplasts,including the large-scale gene transfer from chloroplast to nucleus.However,there are still many essential characters remaining.For the chloroplast division machinery,FtsZ proteins,Ftn2,SulA and part of the division site positioning system- MinD and MinE are still conserved.New or at least partially new proteins,such as FtsZ family proteins FtsZl and ARC3,ARC6H,ARC5,PDV1,PDV2 and MCD1,were introduced for the division of chloroplasts during evolution.Some bacterial cell division proteins,such as FtsA,MreB,Ftn6,FtsW and Ftsl,probably lost their function or were gradually lost.Thus,the chloroplast division machinery is a dynamically evolving structure with both conservation and innovation.

  10. Energy Technology Division research summary -- 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-09-01

    Research funded primarily by the NRC is directed toward assessing the roles of cyclic fatigue, intergranular stress corrosion cracking, and irradiation-assisted stress corrosion cracking on failures in light water reactor (LWR) piping systems, pressure vessels, and various core components. In support of the fast reactor program, the Division has responsibility for fuel-performance modeling and irradiation testing. The Division has major responsibilities in several design areas of the proposed International Thermonuclear Experimental Reactor (ITER). The Division supports the DOE in ensuring safe shipment of nuclear materials by providing extensive review of the Safety Analysis Reports for Packaging (SARPs). Finally, in the nuclear area they are investigating the safe disposal of spent fuel and waste. In work funded by DOE`s Energy Efficiency and Renewable Energy, the high-temperature superconductivity program continues to be a major focal point for industrial interactions. Coatings and lubricants developed in the division`s Tribology Section are intended for use in transportation systems of the future. Continuous fiber ceramic composites are being developed for high-performance heat engines. Nondestructive testing techniques are being developed to evaluate fiber distribution and to detect flaws. A wide variety of coatings for corrosion protection of metal alloys are being studied. These can increase lifetimes significant in a wide variety of coal combustion and gasification environments.

  11. Parkin suppresses Drp1-independent mitochondrial division.

    Science.gov (United States)

    Roy, Madhuparna; Itoh, Kie; Iijima, Miho; Sesaki, Hiromi

    2016-07-01

    The cycle of mitochondrial division and fusion disconnect and reconnect individual mitochondria in cells to remodel this energy-producing organelle. Although dynamin-related protein 1 (Drp1) plays a major role in mitochondrial division in cells, a reduced level of mitochondrial division still persists even in the absence of Drp1. It is unknown how much Drp1-mediated mitochondrial division accounts for the connectivity of mitochondria. The role of a Parkinson's disease-associated protein-parkin, which biochemically and genetically interacts with Drp1-in mitochondrial connectivity also remains poorly understood. Here, we quantified the number and connectivity of mitochondria using mitochondria-targeted photoactivatable GFP in cells. We show that the loss of Drp1 increases the connectivity of mitochondria by 15-fold in mouse embryonic fibroblasts (MEFs). While a single loss of parkin does not affect the connectivity of mitochondria, the connectivity of mitochondria significantly decreased compared with a single loss of Drp1 when parkin was lost in the absence of Drp1. Furthermore, the loss of parkin decreased the frequency of depolarization of the mitochondrial inner membrane that is caused by increased mitochondrial connectivity in Drp1-knockout MEFs. Therefore, our data suggest that parkin negatively regulates Drp1-indendent mitochondrial division.

  12. Competitive Equilibria in Economies with Multiple Divisible and Multiple Divisible Commodities

    NARCIS (Netherlands)

    Koshevoy, G.A.; Talman, A.J.J.

    2002-01-01

    In this paper we consider a general equilibrium model with a finite number of divisible and indivisible commodities.In models with indivisibilities it is typically assumed that there is only one perfectly divisible good, which serves as money.The presence of money in the model is used to transfer

  13. Competitive Equilibria in Economies with Multiple Divisible and Multiple Divisible Commodities

    NARCIS (Netherlands)

    Koshevoy, G.A.; Talman, A.J.J.

    2002-01-01

    In this paper we consider a general equilibrium model with a finite number of divisible and indivisible commodities.In models with indivisibilities it is typically assumed that there is only one perfectly divisible good, which serves as money.The presence of money in the model is used to transfer th

  14. Supersymmetric q-deformed quantum mechanics

    Energy Technology Data Exchange (ETDEWEB)

    Traikia, M. H.; Mebarki, N. [Laboratoire de Physique Mathematique et Subatomique, Mentouri University, Constantine (Algeria)

    2012-06-27

    A supersymmetric q-deformed quantum mechanics is studied in the weak deformation approximation of the Weyl-Heisenberg algebra. The corresponding supersymmetric q-deformed hamiltonians and charges are constructed explicitly.

  15. Involvement of valgus hindfoot deformity in hallux valgus deformity in rheumatoid arthritis.

    Science.gov (United States)

    Yamada, Shutaro; Hirao, Makoto; Tsuboi, Hideki; Akita, Shosuke; Matsushita, Masato; Ohshima, Shiro; Saeki, Yukihiko; Hashimoto, Jun

    2014-09-01

    The involvement of valgus hindfoot deformity in hallux valgus deformity was confirmed in a rheumatoid arthritis case with a destructive valgus hindfoot deformity. Correction of severe valgus, calcaneal lateral offset, and pronated foot deformity instantly normalized hallux valgus deformities postoperatively. Thus, careful hindfoot status evaluation is important when assessing forefoot deformity, including hallux valgus, in rheumatoid arthritis cases.

  16. Inelastic deformation in crystalline rocks

    Science.gov (United States)

    Rahmani, H.; Borja, R. I.

    2011-12-01

    The elasto-plastic behavior of crystalline rocks, such as evaporites, igneous rocks, or metamorphic rocks, is highly dependent on the behavior of their individual crystals. Previous studies indicate that crystal plasticity can be one of the dominant micro mechanisms in the plastic deformation of crystal aggregates. Deformation bands and pore collapse are examples of plastic deformation in crystalline rocks. In these cases twinning within the grains illustrate plastic deformation of crystal lattice. Crystal plasticity is governed by the plastic deformation along potential slip systems of crystals. Linear dependency of the crystal slip systems causes singularity in the system of equations solving for the plastic slip of each slip system. As a result, taking the micro-structure properties into account, while studying the overall behavior of crystalline materials, is quite challenging. To model the plastic deformation of single crystals we use the so called `ultimate algorithm' by Borja and Wren (1993) implemented in a 3D finite element framework to solve boundary value problems. The major advantage of this model is that it avoids the singularity problem by solving for the plastic slip explicitly in sub steps over which the stress strain relationship is linear. Comparing the results of the examples to available models such as Von Mises we show the significance of considering the micro-structure of crystals in modeling the overall elasto-plastic deformation of crystal aggregates.

  17. Perceptual transparency from image deformation.

    Science.gov (United States)

    Kawabe, Takahiro; Maruya, Kazushi; Nishida, Shin'ya

    2015-08-18

    Human vision has a remarkable ability to perceive two layers at the same retinal locations, a transparent layer in front of a background surface. Critical image cues to perceptual transparency, studied extensively in the past, are changes in luminance or color that could be caused by light absorptions and reflections by the front layer, but such image changes may not be clearly visible when the front layer consists of a pure transparent material such as water. Our daily experiences with transparent materials of this kind suggest that an alternative potential cue of visual transparency is image deformations of a background pattern caused by light refraction. Although previous studies have indicated that these image deformations, at least static ones, play little role in perceptual transparency, here we show that dynamic image deformations of the background pattern, which could be produced by light refraction on a moving liquid's surface, can produce a vivid impression of a transparent liquid layer without the aid of any other visual cues as to the presence of a transparent layer. Furthermore, a transparent liquid layer perceptually emerges even from a randomly generated dynamic image deformation as long as it is similar to real liquid deformations in its spatiotemporal frequency profile. Our findings indicate that the brain can perceptually infer the presence of "invisible" transparent liquids by analyzing the spatiotemporal structure of dynamic image deformation, for which it uses a relatively simple computation that does not require high-level knowledge about the detailed physics of liquid deformation.

  18. Deforming tachyon kinks and tachyon potentials

    OpenAIRE

    Afonso, V. I.; Bazeia, D.; Brito, F. A.

    2006-01-01

    In this paper we investigate deformation of tachyon potentials and tachyon kink solutions. We consider the deformation of a DBI type action with gauge and tachyon fields living on D1-brane and D3-brane world-volume. We deform tachyon potentials to get other consistent tachyon potentials by using properly a deformation function depending on the gauge field components. Resolutions of singular tachyon kinks via deformation and applications of deformed tachyon potentials to scalar cosmology scena...

  19. Cell Division and Evolution of Biological Tissues

    Science.gov (United States)

    Rivier, Nicolas; Arcenegui-Siemens, Xavier; Schliecker, Gudrun

    A tissue is a geometrical, space-filling, random cellular network; it remains in this steady state while individual cells divide. Cell division (fragmentation) is a local, elementary topological transformation which establishes statistical equilibrium of the structure. Statistical equilibrium is characterized by observable relations (Lewis, Aboav) between cell shapes, sizes and those of their neighbours, obtained through maximum entropy and topological correlation extending to nearest neighbours only, i.e. maximal randomness. For a two-dimensional tissue (epithelium), the distribution of cell shapes and that of mother and daughter cells can be obtained from elementary geometrical and physical arguments, except for an exponential factor favouring division of larger cells, and exponential and combinatorial factors encouraging a most symmetric division. The resulting distributions are very narrow, and stationarity severely restricts the range of an adjustable structural parameter

  20. The Astrophysics Science Division Annual Report 2008

    Science.gov (United States)

    Oegerle, William; Reddy, Francis; Tyler, Pat

    2009-01-01

    The Astrophysics Science Division (ASD) at Goddard Space Flight Center (GSFC) is one of the largest and most diverse astrophysical organizations in the world, with activities spanning a broad range of topics in theory, observation, and mission and technology development. Scientific research is carried out over the entire electromagnetic spectrum from gamma rays to radio wavelengths as well as particle physics and gravitational radiation. Members of ASD also provide the scientific operations for three orbiting astrophysics missions WMAP, RXTE, and Swift, as well as the Science Support Center for the Fermi Gamma-ray Space Telescope. A number of key technologies for future missions are also under development in the Division, including X-ray mirrors, and new detectors operating at gamma-ray, X-ray, ultraviolet, infrared, and radio wavelengths. This report includes the Division's activities during 2008.

  1. Family division in China's transitional economy.

    Science.gov (United States)

    Chen, Feinian

    2009-03-01

    Using a longitudinal data-set (the China Health and Nutrition Survey) we explored the effect of various economic factors, including household wealth, employment sector, and involvement in a household business on the division of extended families in China's transitional economy. Results from event history analyses suggest that these economic factors act as either a dividing or a unifying force on the extended family. Household wealth reduces the risk of family division, but the effect is weaker for families in which parents have upper secondary education. In addition, an extended family is more likely to divide when married children work in the state sector. Further, the probability of family division is higher in families where daughters-in-law work in the state sector than in those with sons in this sector. Finally, involvement in a household business for married children increases family stability.

  2. Biology Division progress report, October 1, 1991--September 30, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Hartman, F.C.; Cook, J.S.

    1993-10-01

    This Progress Report summarizes the research endeavors of the Biology Division of the Oak Ridge National Laboratory during the period October 1, 1991, through September 30, 1993. The report is structured to provide descriptions of current activities and accomplishments in each of the Division`s major organizational units. Lists of information to convey the entire scope of the Division`s activities are compiled at the end of the report.

  3. The LHC experiments as seen from the Technical Sector

    CERN Document Server

    Inigo-Golfin, J; CERN. Geneva. ST Division

    2003-01-01

    Since the beginning of the collaboration between the ST division and the LHC experiments, already in 1998, the technical sector has provided different structures for the support of the experiments, aiming to coordinate all the activities, which traditionally belong in the technical sector's mandate, like civil engineering and structures, cooling and ventilation, cranes and transport, electricity, gas, etc. A picture of the last year's activity, mainly concentrated on the ATLAS and CMS experiments, shows how the synergies between project managers, staff involved and group structures can strongly improve the service level in the technical domain. This closer collaboration has facilitated the development of further ties linked to the competence available in the groups, and of great interest to the experiments. The steady rise in demand confirms that the choice, made by the experiments, confirms that the technical sector support is a real need in this area

  4. Parkin suppresses Drp1-independent mitochondrial division

    Energy Technology Data Exchange (ETDEWEB)

    Roy, Madhuparna, E-mail: mroy17@jhmi.edu; Itoh, Kie, E-mail: kito5@jhmi.edu; Iijima, Miho, E-mail: miijima@jhmi.edu; Sesaki, Hiromi, E-mail: hsesaki@jhmi.edu

    2016-07-01

    The cycle of mitochondrial division and fusion disconnect and reconnect individual mitochondria in cells to remodel this energy-producing organelle. Although dynamin-related protein 1 (Drp1) plays a major role in mitochondrial division in cells, a reduced level of mitochondrial division still persists even in the absence of Drp1. It is unknown how much Drp1-mediated mitochondrial division accounts for the connectivity of mitochondria. The role of a Parkinson’s disease-associated protein—parkin, which biochemically and genetically interacts with Drp1—in mitochondrial connectivity also remains poorly understood. Here, we quantified the number and connectivity of mitochondria using mitochondria-targeted photoactivatable GFP in cells. We show that the loss of Drp1 increases the connectivity of mitochondria by 15-fold in mouse embryonic fibroblasts (MEFs). While a single loss of parkin does not affect the connectivity of mitochondria, the connectivity of mitochondria significantly decreased compared with a single loss of Drp1 when parkin was lost in the absence of Drp1. Furthermore, the loss of parkin decreased the frequency of depolarization of the mitochondrial inner membrane that is caused by increased mitochondrial connectivity in Drp1-knockout MEFs. Therefore, our data suggest that parkin negatively regulates Drp1-indendent mitochondrial division. -- Highlights: •A Drp1-mediated mechanism accounts for ∼95% of mitochondrial division. •Parkin controls the connectivity of mitochondria via a mechanism that is independent of Drp1. •In the absence of Drp1, connected mitochondria transiently depolarize. •The transient depolarization is independent of calcium signaling and uncoupling protein 2.

  5. Division XII: Commission 6: Astronomical Telegrams

    Science.gov (United States)

    Samus, N. N.; Yamaoka, H.; Gilmore, A. C.; Aksnes, K.; Green, D. W. E.; Marsden, B. G.; Nakano, S.; Lara, Martin; Pitjeva, Elena V.; Sphar, T.; Ticha, J.; Williams, G.

    2015-08-01

    IAU Commission 6 ``Astronomical Telegrams'' had a single business meeting during the Beijing General Assembly of the IAU. It took place on Friday, August 24, 2012. The meeting was attended by five C6 members (N. N. Samus; D. W. E. Green; S. Nakano; J. Ticha; and H. Yamaoka). Also present was Prof. F. Genova as a representative of the IAU Division B. She told the audience about the current restructuring of IAU Commissions and Divisions and consequences for the future of C6.

  6. Quantum internet using code division multiple access

    Science.gov (United States)

    Zhang, Jing; Liu, Yu-xi; Özdemir, Şahin Kaya; Wu, Re-Bing; Gao, Feifei; Wang, Xiang-Bin; Yang, Lan; Nori, Franco

    2013-01-01

    A crucial open problem inS large-scale quantum networks is how to efficiently transmit quantum data among many pairs of users via a common data-transmission medium. We propose a solution by developing a quantum code division multiple access (q-CDMA) approach in which quantum information is chaotically encoded to spread its spectral content, and then decoded via chaos synchronization to separate different sender-receiver pairs. In comparison to other existing approaches, such as frequency division multiple access (FDMA), the proposed q-CDMA can greatly increase the information rates per channel used, especially for very noisy quantum channels. PMID:23860488

  7. Can Seismology Detect Ductile Deformation in the Deep Continental Crust?

    Science.gov (United States)

    Lloyd, G. E.; Halliday, J. M.; Butler, R. W.; Casey, M.; Kendall, J.

    2005-12-01

    Various models exist to explain deformation in deep continental crust, broadly divisible into localized simple shear and distributed pure shear. Although seismic imaging is perhaps the most effective way to determine deformation at depth, the veracity of any interpretation depends critically upon knowledge of the seismic properties of the rocks. As a region of active crustal thickening and exhumation, the Nanga Parbat Massif (NPM), Pakistan Himalaya, offers insight into how localized thrust faults at the Earth's surface couple with distributed strain at depth. Gneissic, mylonitic and cataclastic rocks at the surface were sampled as proxies for lithologies and fabrics currently accommodating deformation at depth. The LPO of individual minerals were measured using SEM/EBSD, from which elastic constants, 3D seismic velocities and anisotropies were predicted. Micas contribute most to the bulk anisotropy; only when mica content is low and/or LPO is weak do other minerals contribute significantly. The anisotropy varies with deformation style: background gneiss samples have highest AVs anisotropy (9.5 percent) compared with highly strained gneiss samples (5.1-6.3 percent) and cataclasite (0.4 percent). This suggests that some shear zones are characterized by low anisotropy. Sample elastic constants were used to construct models, based on current ideas of NPM tectonics, through which P-, S- and converted waves were ray traced. Foliation orientation and intensity have dramatic impacts on seismic waves: rocks with 9.5 percent AVs and vertically aligned foliation persistent through 40km of crust induce ~1.5s AVs compared to horizontal alignment that induces only 0.2s AVs. Mode conversions and transverse component energy are also diagnostic of foliation intensity and orientation. The models indicate that it is possible to discriminate between different deformation processes active at depth using seismic measurements and we conclude that the dominant process in the NPM is

  8. Psychosocial consequences of leprosy and the related deformity in Bangladesh

    Directory of Open Access Journals (Sweden)

    Qazi Azad-uz-zaman

    2017-01-01

    Full Text Available Objective: To explore the psychosocial condition and consequences of the people affected by leprosy and the related deformity in some selected areas of Bangladesh. Methods: A cross-sectional study was conducted from July to December 2015 among 92 leprosy-affected people. A pretested semi-structure questionnaire was used for collecting data by face to face interview from both the low prevalent areas of Khulna and the high prevalent area of Rangpur Division in Bangladesh. Results: Nearly two-fifth of respondents were observed having deformity. Among them, around four-fifth was from Khulna region, about half were above 50 years of age and more than half had monthly family income lower than 5 000 BDT. The development of deformity is found having highly significant association with region (P < 0.001, residence (P < 0.004, and family income (P < 0.004. Differences in consequences between ‘with deformity’ and ‘without deformity’ were found very high. About 65% of the respondents with deformity ‘think less’ of himself, and nearly 60% felt ashamed or embarrassed, 53% had to change job, and 47% was used to think having less respect in the society where the percentage was much lower in all cases to ‘without deformity’ group. Conclusions: Early diagnosis and start multidrug therapy at the earliest stages have chanced to reduce the leprosy-resulted deformity, disfigurement and disability. For those who already have had some nerve damages, health education is highly important to prevent further injury and hence psychosocial consequences.

  9. Shape Deformations in Atomic Nuclei

    CERN Document Server

    Hamamoto, Ikuko

    2011-01-01

    The ground states of some nuclei are described by densities and mean fields that are spherical, while others are deformed. The existence of non-spherical shape in nuclei represents a spontaneous symmetry breaking.

  10. Plastic Deformation of Metal Surfaces

    DEFF Research Database (Denmark)

    Hansen, Niels; Zhang, Xiaodan; Huang, Xiaoxu

    2013-01-01

    parameters by TEM and EBSD and apply strength-structural relationships established for the bulk metal deformed to high strains. This technique has been applied to steel deformed by high energy shot peening and a calculated stress gradient at or near the surface has been successfully validated by hardness......Plastic deformation of metal surfaces by sliding and abrasion between moving parts can be detrimental. However, when the plastic deformation is controlled for example by applying different peening techniques hard surfaces can be produced which can increase the fracture resistance and fatigue life...... of metal components. An optimization of processes and material parameters must be based on a quantification of stress and strain gradients at the surface and in near surface layer where the structural scale can reach few tens of nanometers. For such fine structures it is suggested to quantify structural...

  11. Deformed two center shell model

    CERN Document Server

    Gherghescu, R A

    2003-01-01

    A highly specialized two-center shell model has been developed accounting for the splitting of a deformed parent nucleus into two ellipsoidaly deformed fragments. The potential is based on deformed oscillator wells in direct correspondance with the shape change of the nuclear system. For the first time a potential responsible for the necking part between the fragments is introduced on potential theory basis. As a direct consequence, spin-orbit {\\bf ls} and {\\bf l$^2$} operators are calculated as shape dependent. Level scheme evolution along the fission path for pairs of ellipsoidaly deformed fragments is calculated. The Strutinsky method yields the shell corrections for different mass asymmetries from the superheavy nucleus $^{306}$122 and $^{252}$Cf all along the splitting process.

  12. ROCK DEFORMATION. Final Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    None

    2002-05-24

    The Gordon Research Conference (GRC) on ROCK DEFORMATION was held at II Ciocco from 5/19/02 thru 5/24/02. Emphasis was placed on current unpublished research and discussion of the future target areas in this field.

  13. Non-linear elastic deformations

    CERN Document Server

    Ogden, R W

    1997-01-01

    Classic in the field covers application of theory of finite elasticity to solution of boundary-value problems, analysis of mechanical properties of solid materials capable of large elastic deformations. Problems. References.

  14. Deformed Calabi-Yau Completions

    CERN Document Server

    Keller, Bernhard

    2009-01-01

    We define and investigate deformed n-Calabi-Yau completions of homologically smooth differential graded (=dg) categories. Important examples are: deformed preprojective algebras of connected non Dynkin quivers, Ginzburg dg algebras associated to quivers with potentials and dg categories associated to the category of coherent sheaves on the canonical bundle of a smooth variety. We show that deformed Calabi-Yau completions do have the Calabi-Yau property and that their construction is compatible with derived equivalences and with localizations. In particular, Ginzburg dg algebras have the Calabi-Yau property. We show that deformed 3-Calabi-Yau completions of algebras of global dimension at most 2 are quasi-isomorphic to Ginzburg dg algebras and apply this to the study of cluster-tilted algebras and to the construction of derived equivalences associated to mutations of quivers with potentials. In the appendix, Michel Van den Bergh uses non commutative differential geometry to give an alternative proof of the fac...

  15. Nonlinear Deformable-body Dynamics

    CERN Document Server

    Luo, Albert C J

    2010-01-01

    "Nonlinear Deformable-body Dynamics" mainly consists in a mathematical treatise of approximate theories for thin deformable bodies, including cables, beams, rods, webs, membranes, plates, and shells. The intent of the book is to stimulate more research in the area of nonlinear deformable-body dynamics not only because of the unsolved theoretical puzzles it presents but also because of its wide spectrum of applications. For instance, the theories for soft webs and rod-reinforced soft structures can be applied to biomechanics for DNA and living tissues, and the nonlinear theory of deformable bodies, based on the Kirchhoff assumptions, is a special case discussed. This book can serve as a reference work for researchers and a textbook for senior and postgraduate students in physics, mathematics, engineering and biophysics. Dr. Albert C.J. Luo is a Professor of Mechanical Engineering at Southern Illinois University, Edwardsville, IL, USA. Professor Luo is an internationally recognized scientist in the field of non...

  16. Bilateral cleft lip nasal deformity

    OpenAIRE

    Singh Arun; Nandini R.

    2009-01-01

    Bilateral cleft lip nose deformity is a multi-factorial and complex deformity which tends to aggravate with growth of the child, if not attended surgically. The goals of primary bilateral cleft lip nose surgery are, closure of the nasal floor and sill, lengthening of the columella, repositioning of the alar base, achieving nasal tip projection, repositioning of the lower lateral cartilages, and reorienting the nares from horizontal to oblique position. The multiplicity of procedures in the li...

  17. Symmetries in Connection Preserving Deformations

    Directory of Open Access Journals (Sweden)

    Christopher M. Ormerod

    2011-05-01

    Full Text Available e wish to show that the root lattice of Bäcklund transformations of the q-analogue of the third and fourth Painlevé equations, which is of type (A_2+A_1^{(1}, may be expressed as a quotient of the lattice of connection preserving deformations. Furthermore, we will show various directions in the lattice of connection preserving deformations present equivalent evolution equations under suitable transformations. These transformations correspond to the Dynkin diagram automorphisms.

  18. Properties of deformed Λ hypernuclei

    Institute of Scientific and Technical Information of China (English)

    ZHOU Xian-Rong

    2009-01-01

    The properties of Be and B isotopes and the corresponding Λ hypernuclei are studied by using a deformed Skyrme Hartree-Fock approach with realistic nucleonic Skyrme forces, pairing correlations, and a microscopically determined lambda-nucleon interaction based on Brueckner-Hartree-Fock calculations of hypernuclear matter. The results suggest that the core nuclei and the corresponding hypernuclei have similar deformations with the same sign.

  19. Different Perspectives Between Product and Marketing Division towards Product Critical Success Factors and Its Strategic Importance in Telecommunication Sectors

    Directory of Open Access Journals (Sweden)

    Rachmi Rida Utami

    2013-12-01

    Full Text Available Todays situations force telecomunication company to continuously evaluate, select and prioritize its product portfolio in order to determine the strategically important products. An analysis of critical success factors that determine product’s strategic importance acts as a good introduction to review and manage the product portfolio as well as to seek ways to develop the product. To achieve this, the company is required to have good alliances and collaborations between departments, develop a clear focus and seek innovative ways of doing business, particularly between marketing and product divisions. This study analyzed the alignment between product and marketing divisions of a telecommunication company in Indonesia, in determining the company’s strategic products. The results indicated that both divisions agreed on using financial performance and revenue as the most important criteria and sub-criteria for identifying strategic product. However, the divisions also faced some different visions in selecting alternative criteria. The Product divisions were more focused on technical spesification of product, while the Marketing division were more oriented on customer and market conditions. The study reported the consequences of these difference in practice.

  20. Deformation of textural characteristics and sedimentology along micro-tidal estuarine beaches

    Digital Repository Service at National Institute of Oceanography (India)

    Dora, G.U.; SanilKumar, V.; Philip, C.S.; Johnson, G.

    . Sajiv Philip & Glejin Johnson Ocean Engineering Division, CSIR-National Institute of Oceanography , Dona Paula, Goa 403 004 India [Email:sanil@nio.org] Received 28 November 2012; revised 03 July 2013 Deformation in the textural characteristics... sediment is a foremost parameter for a coastal researcher/engineer/designer due to its various applications for sorting out a coastal environment. Sedimentary process at foreshore zone is a highly dynamical whereas textural characteristics...

  1. Pre-deformation for assembly performance of machine centers

    Science.gov (United States)

    Sun, Yongping; Wang, Delun; Dong, Huimin; Xue, Runiu; Yu, Shudong

    2014-05-01

    The current research of machine center accuracy in workspace mainly focuses on the poor geometric error subjected to thermal and gravity load while in operation, however, there are little researches focusing on the effect of machine center elastic deformations on workspace volume. Therefore, a method called pre-deformation for assembly performance is presented. This method is technically based on the characteristics of machine tool assembly and collaborative computer-aided engineering (CAE) analysis. The research goal is to enhance assembly performance, including straightness, positioning, and angular errors, to realize the precision of the machine tool design. A vertical machine center is taken as an example to illustrate the proposed method. The concept of travel error is defined to obtain the law of the guide surface. The machine center assembly performance is analyzed under cold condition and thermal balance condition to establish the function of pre-deformation. Then, the guide surface in normal direction is processed with the pre-deformation function, and the machine tool assembly performance is measured using a laser interferometer. The measuring results show that the straightness deviation of the Z component in the Y-direction is 158.9% of the allowable value primarily because of the gravity of the spindle head, and the straightness of the X and Y components is minimal. When the machine tool is processed in pre-deformation, the straightness of the Z axis moving component is reduced to 91.2%. This research proposes a pre-deformation machine center assembly method which has sufficient capacity to improving assembly accuracy of machine centers.

  2. Trial NCT01950403 | Division of Cancer Prevention

    Science.gov (United States)

    The Division of Cancer Prevention (DCP) conducts and supports research to determine a person's risk of cancer and to find ways to reduce the risk. This knowledge is critical to making progress against cancer because risk varies over the lifespan as genetic and epigenetic changes can transform healthy tissue into invasive cancer.

  3. Trial NCT01141231 | Division of Cancer Prevention

    Science.gov (United States)

    The Division of Cancer Prevention (DCP) conducts and supports research to determine a person's risk of cancer and to find ways to reduce the risk. This knowledge is critical to making progress against cancer because risk varies over the lifespan as genetic and epigenetic changes can transform healthy tissue into invasive cancer.

  4. Trial NCT02237183 | Division of Cancer Prevention

    Science.gov (United States)

    The Division of Cancer Prevention (DCP) conducts and supports research to determine a person's risk of cancer and to find ways to reduce the risk. This knowledge is critical to making progress against cancer because risk varies over the lifespan as genetic and epigenetic changes can transform healthy tissue into invasive cancer.

  5. Trial NCT01382082 | Division of Cancer Prevention

    Science.gov (United States)

    The Division of Cancer Prevention (DCP) conducts and supports research to determine a person's risk of cancer and to find ways to reduce the risk. This knowledge is critical to making progress against cancer because risk varies over the lifespan as genetic and epigenetic changes can transform healthy tissue into invasive cancer.

  6. Trial NCT02273362 | Division of Cancer Prevention

    Science.gov (United States)

    The Division of Cancer Prevention (DCP) conducts and supports research to determine a person's risk of cancer and to find ways to reduce the risk. This knowledge is critical to making progress against cancer because risk varies over the lifespan as genetic and epigenetic changes can transform healthy tissue into invasive cancer.

  7. Meetings and Events | Division of Cancer Prevention

    Science.gov (United States)

    The Division of Cancer Prevention (DCP) conducts and supports research to determine a person's risk of cancer and to find ways to reduce the risk. This knowledge is critical to making progress against cancer because risk varies over the lifespan as genetic and epigenetic changes can transform healthy tissue into invasive cancer.

  8. Trial NCT02112188 | Division of Cancer Prevention

    Science.gov (United States)

    The Division of Cancer Prevention (DCP) conducts and supports research to determine a person's risk of cancer and to find ways to reduce the risk. This knowledge is critical to making progress against cancer because risk varies over the lifespan as genetic and epigenetic changes can transform healthy tissue into invasive cancer.

  9. Trial NCT01824836 | Division of Cancer Prevention

    Science.gov (United States)

    The Division of Cancer Prevention (DCP) conducts and supports research to determine a person's risk of cancer and to find ways to reduce the risk. This knowledge is critical to making progress against cancer because risk varies over the lifespan as genetic and epigenetic changes can transform healthy tissue into invasive cancer.

  10. Trial NCT01968798 | Division of Cancer Prevention

    Science.gov (United States)

    The Division of Cancer Prevention (DCP) conducts and supports research to determine a person's risk of cancer and to find ways to reduce the risk. This knowledge is critical to making progress against cancer because risk varies over the lifespan as genetic and epigenetic changes can transform healthy tissue into invasive cancer.

  11. Trial NCT01849250 | Division of Cancer Prevention

    Science.gov (United States)

    The Division of Cancer Prevention (DCP) conducts and supports research to determine a person's risk of cancer and to find ways to reduce the risk. This knowledge is critical to making progress against cancer because risk varies over the lifespan as genetic and epigenetic changes can transform healthy tissue into invasive cancer.

  12. Trial NCT02116530 | Division of Cancer Prevention

    Science.gov (United States)

    The Division of Cancer Prevention (DCP) conducts and supports research to determine a person's risk of cancer and to find ways to reduce the risk. This knowledge is critical to making progress against cancer because risk varies over the lifespan as genetic and epigenetic changes can transform healthy tissue into invasive cancer.

  13. Earth Sciences Division annual report 1990

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1991-06-01

    This Annual Report presents summaries of selected representative research activities grouped according to the principal disciplines of the Earth Sciences Division: Reservoir Engineering and Hydrogeology, Geology and Geochemistry, and Geophysics and Geomechanics. Much of the Division`s research deals with the physical and chemical properties and processes in the earth`s crust, from the partially saturated, low-temperature near-surface environment to the high-temperature environments characteristic of regions where magmatic-hydrothermal processes are active. Strengths in laboratory and field instrumentation, numerical modeling, and in situ measurement allow study of the transport of mass and heat through geologic media -- studies that now include the appropriate chemical reactions and the hydraulic-mechanical complexities of fractured rock systems. Of particular note are three major Division efforts addressing problems in the discovery and recovery of petroleum, the application of isotope geochemistry to the study of geodynamic processes and earth history, and the development of borehole methods for high-resolution imaging of the subsurface using seismic and electromagnetic waves. In 1989 a major DOE-wide effort was launched in the areas of Environmental Restoration and Waste Management. Many of the methods previously developed for and applied to deeper regions of the earth will in the coming years be turned toward process definition and characterization of the very shallow subsurface, where man-induced contaminants now intrude and where remedial action is required.

  14. Clinical Trials Management | Division of Cancer Prevention

    Science.gov (United States)

    Information for researchers about developing, reporting, and managing NCI-funded cancer prevention clinical trials. Protocol Information Office The central clearinghouse for clinical trials management within the Division of Cancer Prevention.Read more about the Protocol Information Office. | Information for researchers about developing, reporting, and managing NCI-funded cancer prevention clinical trials.

  15. On-chip mode division multiplexing technologies

    DEFF Research Database (Denmark)

    Ding, Yunhong; Frellsen, Louise Floor; Guan, Xiaowei

    2016-01-01

    using one-dimensional (1D) photonic crystal silicon waveguides. We furthermore use the fabricated devices to demonstrate on-chip point-to-point mode division multiplexing transmission, and all-optical signal processing by mode-selective wavelength conversion. Finally, we report an efficient silicon...

  16. Cell Division in the Light of Modeling.

    Science.gov (United States)

    Bellaïche, Yohanns

    2016-09-26

    Theoretical modeling is central to elucidating underlying principles of emergent properties of complex systems. In cell and developmental biology, the last 15 years have witnessed a convergence of empirical and modeling approaches for fresh perspectives. The role of cell division in coordinating size, shape, and fate in particular illustrates the ever-growing impact of modeling.

  17. Physics Division activities report, 1986--1987

    Energy Technology Data Exchange (ETDEWEB)

    1987-01-01

    This report summarizes the research activities of the Physics Division for the years 1986 and 1987. Areas of research discussed in this paper are: research on e/sup +/e/sup /minus// interactions; research on p/bar p/ interactions; experiment at TRIUMF; double beta decay; high energy astrophysics; interdisciplinary research; and advanced technology development and the SSC.

  18. Problems on Divisibility of Binomial Coefficients

    Science.gov (United States)

    Osler, Thomas J.; Smoak, James

    2004-01-01

    Twelve unusual problems involving divisibility of the binomial coefficients are represented in this article. The problems are listed in "The Problems" section. All twelve problems have short solutions which are listed in "The Solutions" section. These problems could be assigned to students in any course in which the binomial theorem and Pascal's…

  19. Mathematical Induction, Difference Equations and Divisibility

    Science.gov (United States)

    McAndrew, Alasdair

    2009-01-01

    Many exercises in mathematical induction require the student to prove a divisibility property of a function of the integers. Such problems are generally presented as being independent of each other. However, many of these problems can be presented in terms of difference equations, and the theory of difference equations can be used to provide a…

  20. BIGAMOUS MARRIAGE AND THE DIVISION OF COMMON ...

    African Journals Online (AJOL)

    milkii

    married women in Ethiopia are in bigamous marriage, with nine percent .... The Southern Rhodesia Native Affairs Department Annual, Vol. 12, No.1 (1979), p. .... Marry: New Life for an Old Lifestyle, Memphis State University Law Review, Vol. ...... the effects of such property division on the life journey and stakeholders of the.

  1. Bacterial cell division proteins as antibiotic targets

    NARCIS (Netherlands)

    den Blaauwen, T.; Andreu, J.M.; Monasterio, O.

    2014-01-01

    Proteins involved in bacterial cell division often do not have a counterpart in eukaryotic cells and they are essential for the survival of the bacteria. The genetic accessibility of many bacterial species in combination with the Green Fluorescence Protein revolution to study localization of

  2. Cell division activity during apical hook development

    NARCIS (Netherlands)

    Raz, V.; Koornneef, M.

    2001-01-01

    Growth during plant development is predominantly governed by the combined activities of cell division and cell elongation. The relative contribution of both activities controls the growth of a tissue. A fast change in growth is exhibited at the apical hypocotyl of etiolated seedlings where cells

  3. 2008 Research Portfolio: Research & Development Division

    Science.gov (United States)

    Educational Testing Service, 2008

    2008-01-01

    This document describes the breadth of the research being conducted in 2008 by the Research and Development Division at Educational Testing Service (ETS). The research described falls into three large categories: (1) Research supported by the ETS research allocation; (2) Research funded by testing programs at ETS; and (3) Research funded by…

  4. Materials Sciences Division 1990 annual report

    Energy Technology Data Exchange (ETDEWEB)

    1990-01-01

    This report is the Materials Sciences Division's annual report. It contains abstracts describing materials research at the National Center for Electron Microscopy, and for research groups in metallurgy, solid-state physics, materials chemistry, electrochemical energy storage, electronic materials, surface science and catalysis, ceramic science, high tc superconductivity, polymers, composites, and high performance metals.

  5. Theoretical Division annual report, FY 1975. [LASL

    Energy Technology Data Exchange (ETDEWEB)

    Carruthers, P.A.

    1976-02-01

    This report presents an overview of the activities in the Theoretical Division and a summary of research highlights during FY 1975. It is intended to inform a wide audience about the theoretical work of the LASL and, therefore, contains introductory material which places recent advances in a broader context. The report is organized into two special interest reports: reactor safety research and the Advanced Research Committee, and 11 reports from the T-Division group leaders on the work of their respective groups. Main interests and responsibilities are outlined including the relationship of the group's work to the work of other T-Division groups and other divisions at the Laboratory. The description of research highlights for FY 1975 explains in a fairly simple, straightforward manner the major recent advances and their significance. Each group report is followed by a publication list for FY 1975 (330 references) and a list of talks given outside the Laboratory (140 references). 29 figures. (auth)

  6. 25 CFR 227.19 - Division orders.

    Science.gov (United States)

    2010-04-01

    ... INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ENERGY AND MINERALS LEASING OF CERTAIN LANDS IN WIND RIVER INDIAN RESERVATION, WYOMING, FOR OIL AND GAS MINING Rents and Royalties § 227.19 Division orders. (a... it to the supervisor for his consideration. The right is reserved for the supervisor to cancel...

  7. Keypad Geometry and Divisibility of Numbers

    Science.gov (United States)

    Van Dyke, Frances; Keynes, Michael

    2010-01-01

    In this article, the authors show how students can form familiar geometric figures on the calculator keypad and generate numbers that are all divisible by a common number. Students are intrigued by the results and want to know "why it works". The activities can be presented and students given an extended amount of time to think about…

  8. An electrostatic model for biological cell division

    CERN Document Server

    Faraggi, Eshel

    2010-01-01

    Probably the most fundamental processes for biological systems is their ability to create themselves through the use of cell division and cell differentiation. In this work a simple physical model is proposed for biological cell division. The model consists of a positive ionic gradient across the cell membrane, and concentration of charge at the nodes of the spindle and on the chromosomes. A simple calculation, based on Coulomb's Law, shows that under such circumstances a chromosome will tend to break up to its constituent chromatids and that the chromatids will be separated by a distance that is an order of thirty percent of the distance between the spindle nodes. Further repulsion between the nodes will tend to stretch the cell and eventually break the cell membrane between the separated chromatids, leading to cell division. The importance of this work is in continuing the understanding of the electromagnetic basis of cell division and providing it with an analytical model. A central implication of this and...

  9. Budget Setting Strategies for the Company's Divisions

    NARCIS (Netherlands)

    Berg, M.; Brekelmans, R.C.M.; De Waegenaere, A.M.B.

    1997-01-01

    The paper deals with the issue of budget setting to the divisions of a company. The approach is quantitative in nature both in the formulation of the requirements for the set-budgets, as related to different general managerial objectives of interest, and in the modelling of the inherent uncertaintie

  10. Kara Smigel Croker | Division of Cancer Prevention

    Science.gov (United States)

    Kara Smigel Croker is the Communications Manager for the National Cancer Institute Division of Cancer Prevention. She coordinates and supports all aspects of communication, including media contacts, writing and editing of reports and responses, divisional websites, and social media. |

  11. Clinical Trials Node | Division of Cancer Prevention

    Science.gov (United States)

    The Division of Cancer Prevention (DCP) conducts and supports research to determine a person's risk of cancer and to find ways to reduce the risk. This knowledge is critical to making progress against cancer because risk varies over the lifespan as genetic and epigenetic changes can transform healthy tissue into invasive cancer.

  12. Annalisa Gnoleba, MSA | Division of Cancer Prevention

    Science.gov (United States)

    Mrs. Annalisa Gnoleba is the Public Health Analyst for the Cancer Prevention Fellowship Program, Division of Cancer Prevention, National Cancer Institute. In this position, Mrs. Gnoleba serves as the analyst for developing and formulating short and long range public health program goals, objectives and policies. |

  13. Nutritional Science Staff | Division of Cancer Prevention

    Science.gov (United States)

    The Division of Cancer Prevention (DCP) conducts and supports research to determine a person's risk of cancer and to find ways to reduce the risk. This knowledge is critical to making progress against cancer because risk varies over the lifespan as genetic and epigenetic changes can transform healthy tissue into invasive cancer.

  14. Genes involved in cell division in mycoplasmas

    Directory of Open Access Journals (Sweden)

    Frank Alarcón

    2007-01-01

    Full Text Available Bacterial cell division has been studied mainly in model systems such as Escherichia coli and Bacillus subtilis, where it is described as a complex process with the participation of a group of proteins which assemble into a multiprotein complex called the septal ring. Mycoplasmas are cell wall-less bacteria presenting a reduced genome. Thus, it was important to compare their genomes to analyze putative genes involved in cell division processes. The division and cell wall (dcw cluster, which in E. coli and B. subtilis is composed of 16 and 17 genes, respectively, is represented by only three to four genes in mycoplasmas. Even the most conserved protein, FtsZ, is not present in all mycoplasma genomes analyzed so far. A model for the FtsZ protein from Mycoplasma hyopneumoniae and Mycoplasma synoviae has been constructed. The conserved residues, essential for GTP/GDP binding, are present in FtsZ from both species. A strong conservation of hydrophobic amino acid patterns is observed, and is probably necessary for the structural stability of the protein when active. M. synoviae FtsZ presents an extended amino acid sequence at the C-terminal portion of the protein, which may participate in interactions with other still unknown proteins crucial for the cell division process.

  15. Chemical Biodynamics Division. Annual report 1979

    Energy Technology Data Exchange (ETDEWEB)

    1980-08-01

    The Chemical Biodynamics Division of LBL continues to conduct basic research on the dynamics of living cells and on the interaction of radiant energy with organic matter. Many aspects of this basic research are related to problems of environmental and health effects of fossil fuel combustion, solar energy conversion and chemical/ viral carcinogenesis.

  16. Flexible frontiers for text division into rows

    Directory of Open Access Journals (Sweden)

    Dan L. Lacrămă

    2009-01-01

    Full Text Available This paper presents an original solution for flexible hand-written text division into rows. Unlike the standard procedure, the proposed method avoids the isolated characters extensions amputation and reduces the recognition error rate in the final stage.

  17. Cell division activity during apical hook development

    NARCIS (Netherlands)

    Raz, V.; Koornneef, M.

    2001-01-01

    Growth during plant development is predominantly governed by the combined activities of cell division and cell elongation. The relative contribution of both activities controls the growth of a tissue. A fast change in growth is exhibited at the apical hypocotyl of etiolated seedlings where cells gro

  18. Cell division in Corynebacterineae

    Directory of Open Access Journals (Sweden)

    Catriona eDonovan

    2014-04-01

    Full Text Available Bacterial cells must coordinate a number of events during the cell cycle. Spatio-temporal regulation of bacterial cytokinesis is indispensable for the production of viable, genetically identical offspring. In many rod-shaped bacteria, precise midcell assembly of the division machinery relies on inhibitory systems such as Min and Noc. In rod-shaped Actinobacteria, for example Corynebacterium glutamicum and Mycobacterium tuberculosis, the divisome assembles in the proximity of the midcell region, however more spatial flexibility is observed compared to Escherichia coli and Bacillus subtilis. Actinobacteria represent a group of bacteria that spatially regulate cytokinesis in the absence of recognizable Min and Noc homologs. The key cell division steps in E. coli and B. subtilis have been subject to intensive study and are well understood. In comparison, only a minimal set of positive and negative regulators of cytokinesis are known in Actinobacteria. Nonetheless, the timing of cytokinesis and the placement of the division septum is coordinated with growth as well as initiation of chromosome replication and segregation. We summarize here the current knowledge on cytokinesis and division site selection in the Actinobacteria suborder Corynebacterineae.

  19. Energy Technology Division research summary 1997.

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-10-21

    The Energy Technology Division provides materials and engineering technology support to a wide range of programs important to the US Department of Energy. As shown on the preceding page, the Division is organized into ten sections, five with concentrations in the materials area and five in engineering technology. Materials expertise includes fabrication, mechanical properties, corrosion, friction and lubrication, and irradiation effects. Our major engineering strengths are in heat and mass flow, sensors and instrumentation, nondestructive testing, transportation, and electromechanics and superconductivity applications. The Division Safety Coordinator, Environmental Compliance Officers, Quality Assurance Representative, Financial Administrator, and Communication Coordinator report directly to the Division Director. The Division Director is personally responsible for cultural diversity and is a member of the Laboratory-wide Cultural Diversity Advisory Committee. The Division's capabilities are generally applied to issues associated with energy production, transportation, utilization or conservation, or with environmental issues linked to energy. As shown in the organization chart on the next page, the Division reports administratively to the Associate Laboratory Director (ALD) for Energy and Environmental Science and Technology (EEST) through the General Manager for Environmental and Industrial Technologies. While most of our programs are under the purview of the EEST ALD, we also have had programs funded under every one of the ALDs. Some of our research in superconductivity is funded through the Physical Research Program ALD. We also continue to work on a number of nuclear-energy-related programs under the ALD for Engineering Research. Detailed descriptions of our programs on a section-by-section basis are provided in the remainder of this book. This Overview highlights some major trends. Research related to the operational safety of commercial light water

  20. [Division of regulatory cellular systems (Lvov)].

    Science.gov (United States)

    Kusen', S I

    1995-01-01

    Two departments of the A. V. Palladin Institute of Biochemistry of the National Academy of Sciences of Ukraine were founded in 1969 in Lviv. These were: the Department of Biochemistry of Cell Differentiation headed by Professor S. I. Kusen and Department of Regulation of Cellular Synthesis of Low Molecular Weight Compounds headed by Professor G. M. Shavlovsky. The Lviv Division of the A. V. Palladin Institute of Biochemistry of the National Academy of Sciences of Ukraine with Professor S. I. Kusen as its chief, was founded in 1974 on the basis of these departments and the Laboratory of Modelling of Regulatory Cellular Systems headed by Professor M. P. Derkach. The above mentioned laboratory which was not the structural unit obtained the status of Structural Laboratory of Cellular Biophysics in 1982 and was headed by O. A. Goida, Candidate of biological sciences. From 1983 the Laboratory of Correcting Therapy of Malignant Tumors and Hemoblastoses at the Institute of Molecular Biology and Genetics, Academy of Sciences of Ukraine (Chief--S. V. Ivasivka, Candidate of medical sciences) was included in the structure of the Division. That Laboratory was soon transformed into the Department of Carbohydrate Metabolism Regulation headed by Professor I. D. Holovatsky. In 1988 this Department was renamed into the Department of Glycoprotein Biochemistry and headed by M. D. Lutsik, Doctor of biological sciences. In 1982 one more Laboratory of Biochemical Genetics was founded at the Department of Regulation of Cellular Synthesis of Low Molecular Weight Compounds, in 1988 it was transformed into the Department of Biochemical Genetics (Chief--Professor A. A. Sibirny). In 1989 the Laboratory of Anion Transport was taken from A. V. Palladin Institute of Biochemistry, Academy of Sciences of Ukraine to Lviv Division of this Institute. This laboratory was headed by Professor M. M. Veliky. One more reorganization in the Division structure took place in 1994. The Department of

  1. Final Scientific/Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Yale [Johns Hopkins University, Laurel, MD (United States). Applied Physics Laboratory; Thomas, Michael E. [Johns Hopkins University, Laurel, MD (United States). Applied Physics Laboratory; Siegrist, Karen M. [Johns Hopkins University, Laurel, MD (United States). Applied Physics Laboratory; Lennon, Andrew M. [Johns Hopkins University, Laurel, MD (United States). Applied Physics Laboratory; Hunter, Lawrence W. [Johns Hopkins University, Laurel, MD (United States). Applied Physics Laboratory; Oguz, Hasan O. [Johns Hopkins University, Laurel, MD (United States). Applied Physics Laboratory

    2014-06-30

    JHU/APL conducted solid propellant fire characterization tests in warm, humid, ambient conditions near sea level. Yttria and ceria surrogate materials were placed in the fires. The substrates simulating ground surfaces were concrete from a Kennedy Space Center launch pad, and steel covered with a protective ablative material representing a launch platform. In-situ instrumentation consisted of witness materials, thermocouples, air handlers, filters, and cascade impactors; remote instrumentation consisted of optical cameras and spectrometers. Test and analysis team members included the Naval Air Warfare Center Aircraft Division, Sandia National Laboratories (SNL), Alliant Techsystems, and the Johns Hopkins University. Test data were analyzed, reported, and delivered, including plume rise and transport captured on video. Derivation of the alumina particle size distributions formed the basis for condensing vapor and agglomeration estimates. Assessment of alumina mass in the plume, along with the surrogate fraction from filter forensics, provided an estimate of airborne surrogate mass. Technical interchange meetings were held with SNL and the Jet Propulsion Laboratory. Specifications for the fire environment were developed and delivered. A thermochemistry model that simultaneously provides the maximum temperature and heat flux was developed and delivered. An SPIE paper on 3D pyrometry of the fire was written and presented.

  2. Analysis of Mining Terrain Deformation Characteristics with Deformation Information System

    Science.gov (United States)

    Blachowski, Jan; Milczarek, Wojciech; Grzempowski, Piotr

    2014-05-01

    Mapping and prediction of mining related deformations of the earth surface is an important measure for minimising threat to surface infrastructure, human population, the environment and safety of the mining operation itself arising from underground extraction of useful minerals. The number of methods and techniques used for monitoring and analysis of mining terrain deformations is wide and increasing with the development of geographical information technologies. These include for example: terrestrial geodetic measurements, global positioning systems, remote sensing, spatial interpolation, finite element method modelling, GIS based modelling, geological modelling, empirical modelling using the Knothe theory, artificial neural networks, fuzzy logic calculations and other. The aim of this paper is to introduce the concept of an integrated Deformation Information System (DIS) developed in geographic information systems environment for analysis and modelling of various spatial data related to mining activity and demonstrate its applications for mapping and visualising, as well as identifying possible mining terrain deformation areas with various spatial modelling methods. The DIS concept is based on connected modules that include: the spatial database - the core of the system, the spatial data collection module formed by: terrestrial, satellite and remote sensing measurements of the ground changes, the spatial data mining module for data discovery and extraction, the geological modelling module, the spatial data modeling module with data processing algorithms for spatio-temporal analysis and mapping of mining deformations and their characteristics (e.g. deformation parameters: tilt, curvature and horizontal strain), the multivariate spatial data classification module and the visualization module allowing two-dimensional interactive and static mapping and three-dimensional visualizations of mining ground characteristics. The Systems's functionality has been presented on

  3. Augmentation Rhinoplasty in Cleft Lip Nasal Deformity: Preliminary Patients’ Perspective

    Directory of Open Access Journals (Sweden)

    William H. C. Tiong

    2014-01-01

    Full Text Available The correction of cleft lip nasal deformity is challenging and there have been numerous methods described in the literature with little demonstrated technical superiority of one over another. The common clinical issues associated with cleft lip nasal deformity are its lack of symmetry, alar collapse on the affected side, obtuse nasal labial angle, short nasal length, loss of tip definition, and altered columella show among others. We carried out augmentation of cleft lip rhinoplasties with rib graft in 16 patients over the one-year study period. Each of these patients was reviewed and given questionnaire before and after surgery to evaluate their response on the outcome to the approach. Preoperatively, nasal asymmetry is the main complaint (14/16, 87.5% among our series of patients. Postoperatively, 12 (75% patients out of the 16 reported significant improvement in their nasal symmetry with the other four marginal. All patients reported excellent nasal projection postoperatively with good nasal tip definition. Our series of patients reported overall good satisfaction outcome and will recommend this procedure to other patients with cleft lip nasal deformity. In conclusion, augmentation of cleft lip rhinoplasty can be employed to achieve perceivable and satisfactory outcome in patients with cleft lip nasal deformity.

  4. Preferred orientation in experimentally deformed stishovite: implications for deformation mechanisms

    Science.gov (United States)

    Kaercher, P. M.; Zepeda-Alarcon, E.; Prakapenka, V.; Kanitpanyacharoen, W.; Smith, J.; Sinogeikin, S. V.; Wenk, H. R.

    2014-12-01

    The crystal structure of the high pressure SiO2 polymorph stishovite has been studied in detail, yet little is known about its deformation mechanisms. Information about how stishovite deforms under stress is important for understanding subduction of quartz-bearing crustal rocks into the mantle. Particularly, stishovite is elastically anisotropic and thus development of crystallographic preferred orientation (CPO) during deformation may contribute to seismic anomalies in the mantle. We converted a natural sample of flint to stishovite in a laser heated diamond anvil cell and compressed the stishovite aggregate up to 38 GPa. Diffraction patterns were collected in situ in radial geometry at the Advanced Light Source (ALS) and the Advanced Photon Source (APS) to examine development of CPO during deformation. We find that (001) poles preferentially align with the compression direction and infer deformation mechanisms leading to the observed CPO with visco-plastic self consistent (VPSC) polycrystal plasticity models. Our results show pyramidal and basal slip are most likely active at high pressure and ambient temperature, in agreement with transmission electron microscopy (TEM) studies of rutile (TiO2) and paratellurite (TeO2), which are isostructural to stishovite. Conversely other TEM studies of stishovite done at higher temperature suggest dominant prismatic slip. This indicates that a variety of slip systems may be active in stishovite, depending on conditions. As a result, stishovite's contribution to the seismic signature in the mantle may vary as a function of pressure and temperature and thus depth.

  5. Formation of defects at high temperature plastic deformation of gallium arsenide

    Energy Technology Data Exchange (ETDEWEB)

    Mikhnovich, V.V.

    2006-03-14

    The purpose of the present thesis consists in acquiring more concrete information concerning the mechanism of the movement of dislocations and types of defects that appear during the process of dislocation motion on the basis of systematic experimental studies of the GaAs deformation. Experimental studies concerning the dependence of the stress of the samples from their deformation at different values of the deformation parameters (like temperature and deformation speed) were conducted in this paper. To determine the concentration of defects introduced in samples during the deformation process the positron annihilation spectroscopy (PAS) method was used. The second chapter of this paper deals with models of movement of dislocations and origination of defects during deformation of the samples. In the third chapter channels and models of positron annihilation in the GaAs samples are investigated. In the forth chapter the used experimental methods, preparation procedure of test samples and technical data of conducted experiments are described. The fifth chapter shows the results of deformation experiments. The sixth chapter shows the results of positron lifetime measurements by the PAS method. In the seventh chapter one can find analyses of the values of defects concentration that were introduced in samples during deformation. (orig.)

  6. Environmental Education and Development Division (EM-522). Annual report, Fiscal year 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-12-31

    The Environmental Education and Development Division (EM-522) is one of three divisions within the Office of Technology Integration and Environmental Education and Development (EM-52) in Environmental Restoration and Waste Management`s (EM`s) Office of Technology Development (EM-50). The primary design criterion for EM-522 education activities is directly related to meeting EM`s goal of environmental compliance on an accelerated basis and cleanup of the 1989 inventory of inactive sites and facilities by the year 2019. Therefore, EM-522`s efforts are directed specifically toward stimulating knowledge and capabilities to achieve the goals of EM while contributing to DOE`s overall goal of increasing scientific, mathematical, and technical literacy and competency. This report discusses fiscal year 1993 activities.

  7. Deformation Monitoring of Retrofitted Short Concrete Columns with Laser Sensor

    Science.gov (United States)

    Avsar, E. Ö.; Celik, M. F.; Binbir, E.; Arslan, A. E.; Çokkeçeci, D.; Seker, D. Z.; Pala, S.

    2016-06-01

    This paper presents one of the applications of monitoring mechanical tests carried out in Construction Materials Laboratory of Istanbul Technical University. In Turkey, as in many countries, large amount of existing buildings exposed to seismic hazard, therefore various analytical and experimental studies are being conducted to contribute to the solution of the problem. One of the new generation retrofitting techniques is to strength the structural members by using Fiber Reinforcing Polymer (FRP). This study summarize the results of monitoring of deformations short concrete column samples under the incremental compression load. In this study, result of two rectangular short columns are given. One of them was tested as a reference sample, the other sample were tested after strengthening by PET reinforced polymer composite materials. Besides conventional displacement and strain measurement systems, laser scanning method was used to get three dimensional deformed shape of sample at each selected steps.

  8. Bilateral cleft lip nasal deformity

    Directory of Open Access Journals (Sweden)

    Singh Arun

    2009-01-01

    Full Text Available Bilateral cleft lip nose deformity is a multi-factorial and complex deformity which tends to aggravate with growth of the child, if not attended surgically. The goals of primary bilateral cleft lip nose surgery are, closure of the nasal floor and sill, lengthening of the columella, repositioning of the alar base, achieving nasal tip projection, repositioning of the lower lateral cartilages, and reorienting the nares from horizontal to oblique position. The multiplicity of procedures in the literature for correction of this deformity alludes to the fact that no single procedure is entirely effective. The timing for surgical intervention and its extent varies considerably. Early surgery on cartilage may adversely affect growth and development; at the same time, allowing the cartilage to grow in an abnormal position and contributing to aggravation of deformity. Some surgeons advocate correction of deformity at an early age. However, others like the cartilages to grow and mature before going in for surgery. With peer pressure also becoming an important consideration during the teens, the current trend is towards early intervention. There is no unanimity in the extent of nasal dissection to be done at the time of primary lip repair. While many perform limited nasal dissection for the fear of growth retardation, others opt for full cartilage correction at the time of primary surgery itself. The value of naso-alveolar moulding (NAM too is not universally accepted and has now more opponents than proponents. Also most centres in the developing world have neither the personnel nor the facilities for the same. The secondary cleft nasal deformity is variable and is affected by the extent of the original abnormality, any prior surgeries performed and alteration due to nasal growth. This article reviews the currently popular methods for correction of nasal deformity associated with bilateral cleft lip, it′s management both at the time of cleft lip repair

  9. Deformation of second and third quantization

    Science.gov (United States)

    Faizal, Mir

    2015-03-01

    In this paper, we will deform the second and third quantized theories by deforming the canonical commutation relations in such a way that they become consistent with the generalized uncertainty principle. Thus, we will first deform the second quantized commutator and obtain a deformed version of the Wheeler-DeWitt equation. Then we will further deform the third quantized theory by deforming the third quantized canonical commutation relation. This way we will obtain a deformed version of the third quantized theory for the multiverse.

  10. Deformation of Second and Third Quantization

    CERN Document Server

    Faizal, Mir

    2015-01-01

    In this paper, we will deform the second and third quantized theories by deforming the canonical commutation relations in such a way that they become consistent with the generalized uncertainty principle. Thus, we will first deform the second quantized commutator and obtain a deformed version of the Wheeler-DeWitt equation. Then we will further deform the third quantized theory by deforming the third quantized canonical commutation relation. This way we will obtain a deformed version of the third quantized theory for the multiverse.

  11. Transformation of technical infrastructure

    DEFF Research Database (Denmark)

    Nielsen, Susanne Balslev

    1998-01-01

    article about the need of new planning forums in order to initiate transformations with in management of large technical systems for energy, waste and water supply.......article about the need of new planning forums in order to initiate transformations with in management of large technical systems for energy, waste and water supply....

  12. Technical Communication in Japan

    Institute of Scientific and Technical Information of China (English)

    Hiraku Amemiya

    2010-01-01

    @@ 1.Characteristics of Japanese Technical Communication(TC) The visual orientation of information characterizes Japanese technical communication.Manuals that have won Japan Manual Awards in the past have employed various designs with graphical presentations that evoke the style of popular magazines.

  13. Technical Manual. The ACT®

    Science.gov (United States)

    ACT, Inc., 2014

    2014-01-01

    This manual contains technical information about the ACT® college readiness assessment. The principal purpose of this manual is to document the technical characteristics of the ACT in light of its intended purposes. ACT regularly conducts research as part of the ongoing formative evaluation of its programs. The research is intended to ensure that…

  14. Summer Technical Students 2004

    CERN Multimedia

    Maximilien Brice

    2004-01-01

    About 100 technical and doctoral students arrive each year, undergraduates and post-graduates who are preparing diploma or doctoral theses in applied science and technology. They spend up to two years at the Laboratory, as technical students as part of their formal training for a recognised degree or its equivalent.

  15. Technical Program, 1974,

    Science.gov (United States)

    proposed AGARD Technical Program and Budget for 1974. The report reflects the program that was unanimously approved by the AGARD National Delegates Board...required to support the proposed 1974 AGARD technical program is presented in Section 3. The separate publications summary shown in Section 4 identifies by

  16. Year four pupils' understanding of division of whole numbers

    Science.gov (United States)

    Ibrahim, Faridah Mohamed; Pa, Nik Azis Nik

    2014-07-01

    Based on the theory of radical constructivism, this study investigated Year Four pupils' understandings of division by identifying their schemes of the division of whole numbers and how they used them in solving related problematic situations. Data incorporating both verbal and non-verbal behaviors were gathered from seven pupils based on the five clinical interview sessions involving imagining division, representing division, describing process and product of division, interpreting division statement, and solving division problem tasks. Four schemes that were identified are partitioning scheme, measuring scheme, repeated subtraction scheme, and inverse of multiplication scheme. Findings revealed that the measuring scheme was the dominant scheme for the division of whole numbers and the pupils only used the repeated and the inverse of multiplication schemes when they were asked to relate the subtraction or multiplication process with the division process. Further, the pupils were observed to use the long division algorithm in some situations, but there were indications that they used them with little understandings. It is suggested that more remains to be learnt about the nature of pupils' understanding of the division of whole numbers and how schemes of the division of whole numbers are formed and modified. Also, in order to provide appropriate guidance, mathematics teachers need to have some knowledge about pupils' available schemes of the division of whole numbers, no matter how primitive they might seem to the teachers.

  17. Technical Agency in Practice

    DEFF Research Database (Denmark)

    Krummheuer, Antonia Lina

    2015-01-01

    The paper combines the discussion of technical agency and hybrid networks of Actor-Network Theory (ANT) with an ethnomethodological/conversation analytical (EMCA) perspective on situated practices in which participants ascribe agency to technical artefacts. While ANT works with (ethnographic......) description of hybrid networks in which human and non-human actants are granted agency without differentiating different kinds of agency, EMCA focuses on the member's perspectives and the situated construction of technical agency that is made relevant within an ongoing interaction. Based on an EMCA analysis...... of three video recordings of situations in which technical agency is made relevant by the human participants, the paper demonstrates different ways in which agency is granted to technical artefacts. Human participants can treat a technology as communication partner, as an active part (and actant...

  18. Technical Agency in Practice

    DEFF Research Database (Denmark)

    Krummheuer, Antonia Lina

    2015-01-01

    ) description of hybrid networks in which human and non-human actants are granted agency without differentiating different kinds of agency, EMCA focuses on the member's perspectives and the situated construction of technical agency that is made relevant within an ongoing interaction. Based on an EMCA analysis......The paper combines the discussion of technical agency and hybrid networks of Actor-Network Theory (ANT) with an ethnomethodological/conversation analytical (EMCA) perspective on situated practices in which participants ascribe agency to technical artefacts. While ANT works with (ethnographic...... of three video recordings of situations in which technical agency is made relevant by the human participants, the paper demonstrates different ways in which agency is granted to technical artefacts. Human participants can treat a technology as communication partner, as an active part (and actant...

  19. Mixing of discontinuously deforming media

    Science.gov (United States)

    Smith, L. D.; Rudman, M.; Lester, D. R.; Metcalfe, G.

    2016-02-01

    Mixing of materials is fundamental to many natural phenomena and engineering applications. The presence of discontinuous deformations—such as shear banding or wall slip—creates new mechanisms for mixing and transport beyond those predicted by classical dynamical systems theory. Here, we show how a novel mixing mechanism combining stretching with cutting and shuffling yields exponential mixing rates, quantified by a positive Lyapunov exponent, an impossibility for systems with cutting and shuffling alone or bounded systems with stretching alone, and demonstrate it in a fluid flow. While dynamical systems theory provides a framework for understanding mixing in smoothly deforming media, a theory of discontinuous mixing is yet to be fully developed. New methods are needed to systematize, explain, and extrapolate measurements on systems with discontinuous deformations. Here, we investigate "webs" of Lagrangian discontinuities and show that they provide a template for the overall transport dynamics. Considering slip deformations as the asymptotic limit of increasingly localised smooth shear, we also demonstrate exactly how some of the new structures introduced by discontinuous deformations are analogous to structures in smoothly deforming systems.

  20. Technical Writing in the Netherlands.

    Science.gov (United States)

    de Vet, Dominique M. W.

    1996-01-01

    Discusses the technical writing profession in the Netherlands. Bases the discussion on two studies--one directed at technical freelancers and another directed at technical writers working within organizations. Gives a profile of technical writers in the Netherlands; an impression of the problems technical writers in organizations deal with;…

  1. DNR Division of Parks and Trails District Boundaries

    Data.gov (United States)

    Minnesota Department of Natural Resources — This data shows the DNR Division of Parks and Trails District Boundaries as of May 2010. The boundaries were created by the Division Leadership Team. Boundaries are...

  2. Mixing of discontinuously deforming media

    CERN Document Server

    Smith, Lachlan D; Lester, Daniel R; Metcalfe, Guy

    2016-01-01

    Mixing of materials is fundamental to many natural phenomena and engineering applications. The presence of discontinuous deformations - such as shear banding or wall slip - creates new mechanisms for mixing and transport beyond those predicted by classical dynamical systems theory. Here we show how a novel mixing mechanism combining stretching with cutting and shuffling yields exponential mixing rates, quantified by a positive Lyapunov exponent, an impossibility for systems with cutting and shuffling alone or bounded systems with stretching alone, and demonstrate it in a fluid flow. While dynamical systems theory provides a framework for understanding mixing in smoothly deforming media, a theory of discontinuous mixing is yet to be fully developed. New methods are needed to systematize, explain and extrapolate measurements on systems with discontinuous deformations. Here we investigate 'webs' of Lagrangian discontinuities and show that they provide a template for the overall transport dynamics. Considering sl...

  3. Shock metamorphism of deformed quartz

    Science.gov (United States)

    Gratz, Andrew J.; Christie, John; Tyburczy, James; Ahrens, Thomas; Pongratz, Peter

    1988-01-01

    The effect produced by shock loading (to peak pressures of 12 and 24) on deformed synthetic quartz containing a dislocation and abundant bubbles and small inclusions was investigated, and the relationships between preexisting dislocation density shock lamellae in the target material were examined. The resultant material was found to be inhomogeneously deformed and extremely fractured. Results of TEM examinations indicate that no change in dislocation density was caused by shock loading except in regions containing shock lamellae, where the dislocation density was lowered. The shock-induced defects tend to nucleate on and be controlled by preexisting stress concentrators; shock lamellae, glassy veins, and most curviplanar defects form in tension, presumably during release. An extremely mobile silica fluid is formed and injected into fractures during release, which forcibly removes crystalline fragments from vein walls. It is concluded that shock deformation in quartz is dominated by fracture and melting.

  4. Finite Deformation of Magnetoelastic Film

    Energy Technology Data Exchange (ETDEWEB)

    Barham, Matthew Ian [Univ. of California, Berkeley, CA (United States)

    2011-05-31

    A nonlinear two-dimensional theory is developed for thin magnetoelastic lms capable of large deformations. This is derived directly from three-dimensional theory. Signi cant simpli cations emerge in the descent from three dimensions to two, permitting the self eld generated by the body to be computed a posteriori. The model is specialized to isotropic elastomers with two material models. First weak magnetization is investigated leading to a free energy where magnetization and deformation are un-coupled. The second closely couples the magnetization and deformation. Numerical solutions are obtained to equilibrium boundary-value problems in which the membrane is subjected to lateral pressure and an applied magnetic eld. An instability is inferred and investigated for the weak magnetization material model.

  5. On deformations of triangulated models

    CERN Document Server

    De Deken, Olivier

    2012-01-01

    This paper is the first part of a project aimed at understanding deformations of triangulated categories, and more precisely their dg and A infinity models, and applying the resulting theory to the models occurring in the Homological Mirror Symmetry setup. In this first paper, we focus on models of derived and related categories, based upon the classical construction of twisted objects over a dg or $A_{\\infty}$-algebra. For a Hochschild 2 cocycle on such a model, we describe a corresponding "curvature compensating" deformation which can be entirely understood within the framework of twisted objects. We unravel the construction in the specific cases of derived A infinity and abelian categories, homotopy categories, and categories of graded free qdg-modules. We identify a purity condition on our models which ensures that the structure of the model is preserved under deformation. This condition is typically fulfilled for homotopy categories, but not for unbounded derived categories.

  6. Structural dynamics division research and technology accomplishments for fiscal year 1990 and plans for fiscal year 1991

    Science.gov (United States)

    Wynne, Eleanor C.

    1991-01-01

    The research accomplishments of the Structural Dynamics Division for F.Y. 1991 are presented. The work is discussed in terms of highlights of accomplishments during the past year and plans for the current year as they relate to 5-year plans and the objectives of each technical area. Included is research on unsteady aerodynamics, helicopter rotors, computational fluid dynamics, oscillations of leading edge flaps of a delta wing, and aircraft wing loads.

  7. Plant Cell Division Analyzed by Transient Agrobacterium-Mediated Transformation of Tobacco BY-2 Cells.

    Science.gov (United States)

    Buschmann, Henrik

    2016-01-01

    The continuing analysis of plant cell division will require additional protein localization studies. This is greatly aided by GFP-technology, but plant transformation and the maintenance of transgenic lines can present a significant technical bottleneck. In this chapter I describe a method for the Agrobacterium-mediated genetic transformation of tobacco BY-2 cells. The method allows for the microscopic analysis of fluorescence-tagged proteins in dividing cells in within 2 days after starting a coculture. This transient transformation procedure requires only standard laboratory equipment. It is hoped that this rapid method would aid researchers conducting live-cell localization studies in plant mitosis and cytokinesis.

  8. Environmental Sciences Division Toxicology Laboratory standard operating procedures

    Energy Technology Data Exchange (ETDEWEB)

    Kszos, L.A.; Stewart, A.J.; Wicker, L.F.; Logsdon, G.M.

    1989-09-01

    This document was developed to provide the personnel working in the Environmental Sciences Division's Toxicology Laboratory with documented methods for conducting toxicity tests. The document consists of two parts. The first part includes the standard operating procedures (SOPs) that are used by the laboratory in conducting toxicity tests. The second part includes reference procedures from the US Environmental Protection Agency document entitled Short-Term Methods for Estimating the Chronic Toxicity of Effluents and Receiving Waters to Freshwater Organisms, upon which the Toxicology Laboratory's SOPs are based. Five of the SOPs include procedures for preparing Ceriodaphnia survival and reproduction test. These SOPs include procedures for preparing Ceriodaphnia food (SOP-3), maintaining Ceriodaphnia cultures (SOP-4), conducting the toxicity test (SOP-13), analyzing the test data (SOP-13), and conducting a Ceriodaphnia reference test (SOP-15). Five additional SOPs relate specifically to the fathead minnow (Pimephales promelas) larval survival and growth test: methods for preparing fathead minnow larvae food (SOP-5), maintaining fathead minnow cultures (SOP-6), conducting the toxicity test (SOP-9), analyzing the test data (SOP-12), and conducting a fathead minnow reference test (DOP-14). The six remaining SOPs describe methods that are used with either or both tests: preparation of control/dilution water (SOP-1), washing of glassware (SOP-2), collection and handling of samples (SOP-7), preparation of samples (SOP-8), performance of chemical analyses (SOP-11), and data logging and care of technical notebooks (SOP-16).

  9. Energy and Environment Division annual report, 1978

    Energy Technology Data Exchange (ETDEWEB)

    Camp, J.A. (ed.)

    1978-01-01

    Research activities of this Division are reported under nine separate programs, namely: Energy Analysis; Solar Energy; Energy-Efficient Buildings; Chemical Process Research and Development; Environmental Research; Atmospheric Aerosol Research; Oil Shale Research; Instrumentation Development; and Combustion Research. A separate abstract was prepared for each of the nine programs, each of which contained several individual research summaries, with responsible researchers listed. All of the abstracts will appear in Energy Research Abstracts (ERA), and five will appear in Energy Abstracts for Policy Analysis (EAPA).

  10. The Divisive Threat of Immigration in Europe

    Science.gov (United States)

    2012-12-01

    Europe , immigrant children consistently underperformed in reading. This disparity suggests that immigrant children will have lower literacy rates, less...OF IMMIGRATION IN EUROPE by Andrew J. Sheehan Lars W. Lilleby December 2012 Thesis Advisor: Gordon McCormick Second Reader: Anna...COVERED Master’s Thesis 4. TITLE AND SUBTITLE The Divisive Threat of Immigration in Europe 5. FUNDING NUMBERS 6. AUTHOR(S) Lars W. Lilleby

  11. Earth Sciences Division annual report 1980

    Energy Technology Data Exchange (ETDEWEB)

    1981-07-01

    Summaries of the highlights of programs in the Earth Sciences Division are presented under four headings; Geosciences, Geothermal Energy Development, Nuclear Waste Isolation, and Marine Sciences. Utilizing both basic and applied research in a wide spectrum of topics, these programs are providing results that will be of value in helping to secure the nation's energy future. Separate abstracts have been prepared for each project for inclusion in the Energy Data Base. (DMC)

  12. Women of the Solar Physics Division

    Science.gov (United States)

    Dupree, Andrea K.

    2007-05-01

    In 1970, when the Solar Physics Division was established, the invitation to become a founding member of the Division was extended by the Organizing Committee to a group of 61 solar scientists of which 4 were women (6.6%). At the first SPD meeting in Huntsville AL (1970), 11% of the papers were given by women. Near that time (1973), women accounted for 8% of all AAS members. The representation of women in the SPD has more than doubled in percentage since the first years. Currently, women comprise about 15.5% of SPD members which, however, is less than the percentage in the AAS general membership (18%) in March 2007. In the 37 years that the SPD has existed, women have frequently held the office of Treasurer and Secretary of the Division and made notable contributions. Elske V.P. Smith was elected the first Treasurer of the SPD and that began a long tradition. Women appear to be considered exceptionally trustworthy since they have been reelected and occupied the position of Treasurer for 75% of the available terms. The Office of SPD Secretary has seen a woman for 13% of the terms. Yet women are practically absent among those in the top leadership positions and in the lists of prize winners of the SPD. Among the 21 SPD Chairs, only 1 woman, Judith T. Karpen, has held that office. The Hale Prize has been awarded 19 times in almost 3 decades, and all of the awardees have been men. Several aspects of the participation of women and their contributions to the Solar Physics Division of the AAS will be reviewed, and compared to that of the AAS and astronomy in general.

  13. On Certain Divisibility Property of Polynomials

    CERN Document Server

    Caceres, Luis F

    2010-01-01

    We review the definition of D-rings introduced by H. Gunji & D. L. MacQuillan. We provide an alternative characterization for such rings that allows us to give an elementary proof of that a ring of algebraic integers is a D-ring. Moreover, we give a characterization for D-rings that are also unique factorization domains to determine divisibility of polynomials using polynomial evaluations.

  14. A combinatorial divisibility question from noncommutative algebra

    OpenAIRE

    2016-01-01

    We present a general conjecture on the divisibility of a certain expression in terms of Kostka numbers and their close variants. This conjecture is closely related to a variant of the period-index problem of noncommutative algebra, with partial implications in both directions. We present a description of the connection between these two problems via Schubert calculus as motivation and evidence for the conjecture before turning to a proof of the conjecture in a family of cases.

  15. Division algebras, extended supersymmetries and applications

    Energy Technology Data Exchange (ETDEWEB)

    Toppan, F. [Centro Brasileiro de Pesquisas Fisicas (CBPF), Rio de Janeiro, RJ (Brazil)

    2001-03-01

    I present here some new results which make explicit the role of the division algebras R, C, H, O in the construction and classification of, respectively, N= 1, 2, 4, 8 global supersymmetric quantum mechanical and classical dynamical systems. In particular an N=8 Malcev superaffine algebra is introduced and its relation to the non-associative N = 8 SCA is discussed. A list of present and possible future applications is given. (author)

  16. Unpacking the Division Interpretation of a Fraction

    Science.gov (United States)

    Poon, Rebecca C.; Lewis, Priscilla Eide

    2015-01-01

    One of the challenges in learning fractions is understanding how and why a fraction can have multiple interpretations. As presented in one textbook, a fraction is "a symbol, such as 2/3, 5/1, or 8/5, used to name a part of a whole, a part of a set, a location on a number line, or a division of whole numbers" (Charles et al. 2012, p.…

  17. Applied Physics Division 1998 Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    Cecchini, M.; Crescentini, L; Ghezzi, L.; Kent, C.; Bottomei, M. [ENEA, Centro Ricerche Frascati, Frascati, RM (Italy). Applied physics Division

    1999-07-01

    This report outlines the 1998 research activities carried out by the Applied Physics Division of the Innovation Department of ENEA (Italian Agency for New Technologies, Energy and Environment). The fields addressed and discussed include: optical and electro-optical technologies (chaps. 1 and 2); accelerator technologies (chap. 3); diagnostic systems for science and engineering (chaps. 4 and 5); theory, modelling and computational methods (chaps. 6 and 7). The aim of the Applied Physics Division is to develop technologies and systems that can be directly applied by internal (ENEA) and external users in research (high-resolution spectroscopy, laser-generated soft-x-ray sources), production processes (laser material photoproduction, structural analysis), social, cultural and environmental sciences (laser remote sensing, modelling of ecosystems and population dynamics) and medicine (particle accelerator for radiotherapy). Most of the work in 1998 was performed by the division's laboratories at the Frascati, Casaccia and Bologna Research Centres of ENEA; some was done elsewhere in collaboration with other ENEA units, external laboratories and industries. A good share of the activities was carried out for international projects; in particular, the IV European Union Framework Program.

  18. Bilateral high division of sciatic nerve

    Directory of Open Access Journals (Sweden)

    K. Shwetha

    2014-08-01

    Full Text Available Sciatic nerve is the thickest nerve in the body formed by the sacral plexus from L4 to S3 in the lesser pelvis. It emerges through the greater sciatic foramen below the piriformis and enter the gluteal region. Then the nerve passes on the back of the thigh and at the level of superior angle of popliteal fossa it terminates by dividing into tibial and common peroneal nerve. The knowledge of anatomical variations in the division of nerve is important for various surgical and anaesthetic procedures. During routine dissection in the department of anatomy, Mysore Medical College and Research Institute, Mysore, a rare bilateral high division of sciatic nerve was observed in a female cadaver aged about 40 years. In the present case there was bilateral high division of sciatic nerve. The nerve was seen dividing into two branches before it emerges through the greater sciatic foramen. The tibial nerve was entering the gluteal region below the piriformis muscle and common peroneal nerve was entering by piercing the piriformis. The knowledge of this variation is important as the nerve may get compressed with surrounding anatomical structures resulting in non discogenic sciatica. The awareness of variations is important for surgeons during various procedures like fracture, posterior dislocation of hip joint and hip joint replacement. The anatomical variations are important during deep intramuscular injections in gluteal region and also for anaesthetists during sciatic nerve block. [Int J Res Med Sci 2014; 2(4.000: 1785-1787

  19. Deconstructing Interocular Suppression: Attention and Divisive Normalization.

    Directory of Open Access Journals (Sweden)

    Hsin-Hung Li

    2015-10-01

    Full Text Available In interocular suppression, a suprathreshold monocular target can be rendered invisible by a salient competitor stimulus presented in the other eye. Despite decades of research on interocular suppression and related phenomena (e.g., binocular rivalry, flash suppression, continuous flash suppression, the neural processing underlying interocular suppression is still unknown. We developed and tested a computational model of interocular suppression. The model included two processes that contributed to the strength of interocular suppression: divisive normalization and attentional modulation. According to the model, the salient competitor induced a stimulus-driven attentional modulation selective for the location and orientation of the competitor, thereby increasing the gain of neural responses to the competitor and reducing the gain of neural responses to the target. Additional suppression was induced by divisive normalization in the model, similar to other forms of visual masking. To test the model, we conducted psychophysics experiments in which both the size and the eye-of-origin of the competitor were manipulated. For small and medium competitors, behavioral performance was consonant with a change in the response gain of neurons that responded to the target. But large competitors induced a contrast-gain change, even when the competitor was split between the two eyes. The model correctly predicted these results and outperformed an alternative model in which the attentional modulation was eye specific. We conclude that both stimulus-driven attention (selective for location and feature and divisive normalization contribute to interocular suppression.

  20. Kinetics of cell division in epidermal maintenance

    CERN Document Server

    Klein, Allon M; Jones, Philip H; Simons, Benjamin D

    2007-01-01

    The rules governing cell division and differentiation are central to understanding the mechanisms of development, aging and cancer. By utilising inducible genetic labelling, recent studies have shown that the clonal population in transgenic mouse epidermis can be tracked in vivo. Drawing on these results, we explain how clonal fate data may be used to infer the rules of cell division and differentiation underlying the maintenance of adult murine tail-skin. We show that the rates of cell division and differentiation may be evaluated by considering the long-time and short-time clone fate data, and that the data is consistent with cells dividing independently rather than synchronously. Motivated by these findings, we consider a mechanism for cancer onset based closely on the model for normal adult skin. By analysing the expected changes to clonal fate in cancer emerging from a simple two-stage mutation, we propose that clonal fate data may provide a novel method for studying the earliest stages of the disease.

  1. Deformable mirror with thermal actuators.

    Science.gov (United States)

    Vdovin, Gleb; Loktev, Mikhail

    2002-05-01

    Low-cost adaptive optics is applied in lasers, scientific instrumentation, ultrafast sciences, and ophthalmology. These applications demand that the deformable mirrors used be simple, inexpensive, reliable, and efficient. We report a novel type of ultralow-cost deformable mirror with thermal actuators. The device has a response time of ~5 s , an actuator stroke of ~6mum , and temporal stability of ~lambda/10 rms in the visible range and can be used for correction of rather large aberrations with slow-changing amplitude.

  2. Computing layouts with deformable templates

    KAUST Repository

    Peng, Chihan

    2014-07-27

    In this paper, we tackle the problem of tiling a domain with a set of deformable templates. A valid solution to this problem completely covers the domain with templates such that the templates do not overlap. We generalize existing specialized solutions and formulate a general layout problem by modeling important constraints and admissible template deformations. Our main idea is to break the layout algorithm into two steps: a discrete step to lay out the approximate template positions and a continuous step to refine the template shapes. Our approach is suitable for a large class of applications, including floorplans, urban layouts, and arts and design. Copyright © ACM.

  3. Cavity coalescence in superplastic deformation

    Energy Technology Data Exchange (ETDEWEB)

    Stowell, M.J.; Livesey, D.W.; Ridley, N.

    1984-01-01

    An analysis of the probability distribution function of particles randomly dispersed in a solid has been applied to cavitation during superplastic deformation and a method of predicting cavity coalescence developed. Cavity size distribution data were obtained from two microduplex nickel-silver alloys deformed superplastically to various extents at elevated temperature, and compared to theoretical predictions. Excellent agreement occurred for small void sizes but the model underestimated the number of voids in the largest size groups. It is argued that the discrepancy results from a combination of effects due to non-random cavity distributions and to enhanced growth rates and incomplete spheroidization of the largest cavities.

  4. Fourth order deformed general relativity

    CERN Document Server

    Cuttell, Peter D

    2014-01-01

    Whenever the condition of anomaly freedom is imposed within the framework of effective approaches to loop quantum cosmology, one seems to conclude that a deformation of general covariance is required. Here, starting from a general deformation we regain an effective gravitational Lagrangian including terms up to fourth order in extrinsic curvature. We subsequently constrain the form of the corrections, and then investigate the conditions for the occurrence of a big bounce and the realisation of an inflationary era, in the presence of a perfect fluid or scalar field.

  5. Deforming baryons into confining strings

    CERN Document Server

    Hartnoll, S A; Hartnoll, Sean A.; Portugues, Ruben

    2004-01-01

    We find explicit probe D3-brane solutions in the infrared of the Maldacena-Nunez background. The solutions describe deformed baryon vertices: q external quarks are separated in spacetime from the remaining N-q. As the separation is taken to infinity we recover known solutions describing infinite confining strings in ${\\mathcal{N}}=1$ gauge theory. We present results for the mass of finite confining strings as a function of length. We also find probe D2-brane solutions in a confining type IIA geometry, the reduction of a G_2 holonomy M theory background. The interpretation of these solutions as deformed baryons/confining strings is not as straightforward.

  6. Couples' attitudes, childbirth and the division of labour

    NARCIS (Netherlands)

    Jansen, M.; Liefbroer, A.C.

    2006-01-01

    In this article, the authors examine effects of partners’ attitudes on the timing of the birth of a first child, the division of domestic labor, the division of child care, and the division of paid labor of couples. They use data from the Panel Study of Social Integration in the Netherlands, which i

  7. Formative cell divisions: principal determinants of plant morphogenesis.

    Science.gov (United States)

    Smolarkiewicz, Michalina; Dhonukshe, Pankaj

    2013-03-01

    Formative cell divisions utilizing precise rotations of cell division planes generate and spatially place asymmetric daughters to produce different cell layers. Therefore, by shaping tissues and organs, formative cell divisions dictate multicellular morphogenesis. In animal formative cell divisions, the orientation of the mitotic spindle and cell division planes relies on intrinsic and extrinsic cortical polarity cues. Plants lack known key players from animals, and cell division planes are determined prior to the mitotic spindle stage. Therefore, it appears that plants have evolved specialized mechanisms to execute formative cell divisions. Despite their profound influence on plant architecture, molecular players and cellular mechanisms regulating formative divisions in plants are not well understood. This is because formative cell divisions in plants have been difficult to track owing to their submerged positions and imprecise timings of occurrence. However, by identifying a spatiotemporally inducible cell division plane switch system applicable for advanced microscopy techniques, recent studies have begun to uncover molecular modules and mechanisms for formative cell divisions. The identified molecular modules comprise developmentally triggered transcriptional cascades feeding onto microtubule regulators that now allow dissection of the hierarchy of the events at better spatiotemporal resolutions. Here, we survey the current advances in understanding of formative cell divisions in plants in the context of embryogenesis, stem cell functionality and post-embryonic organ formation.

  8. 28 CFR 3.2 - Assistant Attorney General, Criminal Division.

    Science.gov (United States)

    2010-07-01

    ... 28 Judicial Administration 1 2010-07-01 2010-07-01 false Assistant Attorney General, Criminal Division. 3.2 Section 3.2 Judicial Administration DEPARTMENT OF JUSTICE GAMBLING DEVICES § 3.2 Assistant Attorney General, Criminal Division. The Assistant Attorney General, Criminal Division, is authorized to...

  9. Couples’ Attitudes, Childbirth, and the Division of Labor

    NARCIS (Netherlands)

    Jansen, Miranda; Liefbroer, Aart C.

    2006-01-01

    In this article, the authors examine effects of partners’ attitudes on the timing of the birth of a first child, the division of domestic labor, the division of child care, and the division of paid labor of couples. They use data from the Panel Study of Social Integration in the Netherlands, which i

  10. 15 CFR 950.8 - Satellite Data Services Division (SDSD).

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false Satellite Data Services Division (SDSD... THE ENVIRONMENTAL DATA SERVICE ENVIRONMENTAL DATA AND INFORMATION § 950.8 Satellite Data Services Division (SDSD). The Satellite Data Services Division of the EDIS National Climatic Center...

  11. Couples’ Attitudes, Childbirth, and the Division of Labor

    NARCIS (Netherlands)

    Jansen, Miranda; Liefbroer, Aart C.

    2006-01-01

    In this article, the authors examine effects of partners’ attitudes on the timing of the birth of a first child, the division of domestic labor, the division of child care, and the division of paid labor of couples. They use data from the Panel Study of Social Integration in the Netherlands, which i

  12. Control of oriented cell division in the Arabidopsis embryo

    NARCIS (Netherlands)

    Dop, van M.; Liao, C.Y.; Weijers, D.

    2015-01-01

    Multicellular plant development requires strict control of cell division orientation. A key unanswered question is how developmental regulators interact with the generic cell division machinery to trigger oriented divisions. We discuss the Arabidopsis embryo as a model for addressing this question.

  13. Couples' Attitudes, Childbirth, and the Division of Labor

    Science.gov (United States)

    Jansen, Miranda; Liefbroer, Aart C.

    2006-01-01

    In this article, the authors examine effects of partners' attitudes on the timing of the birth of a first child, the division of domestic labor, the division of child care, and the division of paid labor of couples. They use data from the Panel Study of Social Integration in the Netherlands, which includes independent measures of both partners'…

  14. Reconciling Divisions in the Field of Authentic Education

    Science.gov (United States)

    Sarid, Ariel

    2015-01-01

    The aim of this article is twofold: first, to identify and address three central divisions in the field of authentic education that introduce ambiguity and at times inconsistencies within the field of authentic education. These divisions concern a) the relationship between autonomy and authenticity; b) the division between the two basic attitudes…

  15. 25 CFR 11.800 - Jurisdiction of appellate division.

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Jurisdiction of appellate division. 11.800 Section 11.800... LAW AND ORDER CODE Appellate Proceedings § 11.800 Jurisdiction of appellate division. The jurisdiction of the appellate division shall extend to all appeals from final orders and judgments of the...

  16. 32 CFR 516.36 - Referral to Litigation Division.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 3 2010-07-01 2010-07-01 true Referral to Litigation Division. 516.36 Section... Property Claims Assertion of Other Claims § 516.36 Referral to Litigation Division. (a) General. The... channels to Litigation Division with a litigation report. (See § 516.23 of this part). (b)...

  17. Divisibility and Multiplicative Structure of Natural Numbers: Preservice Teachers' Understanding.

    Science.gov (United States)

    Zazkis, Rina; Campbell, Stephen

    1996-01-01

    Elementary number theory is investigated with the main focus on the concept of divisibility and its relation to division, multiplication, prime and composite numbers, factorization, divisibility rules, and prime decomposition. Preservice teachers' responses indicated dispositions toward procedural attachments even when conceptual understanding was…

  18. Milestones for National Technical

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    The first session of National Technical Committee of Auto Standardization was established onApri128,1988. The first session of National Technical Committee of Auto Standardization (SAC/TC 114)was established in Beijing on April 28,1988,under the approval of the National Bureau of Standards at that time,with the official from China Association of Automobile Manufacturers as its director.It played a very impoorant role,not only in the unified management of auto standards but also in the technical work of the management of auto products.

  19. Deformations of the Almheiri-Polchinski model

    Science.gov (United States)

    Kyono, Hideki; Okumura, Suguru; Yoshida, Kentaroh

    2017-03-01

    We study deformations of the Almheiri-Polchinski (AP) model by employing the Yang-Baxter deformation technique. The general deformed AdS2 metric becomes a solution of a deformed AP model. In particular, the dilaton potential is deformed from a simple quadratic form to a hyperbolic function-type potential similarly to integrable deformations. A specific solution is a deformed black hole solution. Because the deformation makes the spacetime structure around the boundary change drastically and a new naked singularity appears, the holographic interpretation is far from trivial. The Hawking temperature is the same as the undeformed case but the Bekenstein-Hawking entropy is modified due to the deformation. This entropy can also be reproduced by evaluating the renormalized stress tensor with an appropriate counter-term on the regularized screen close to the singularity.

  20. Space-based monitoring of ground deformation

    Science.gov (United States)

    Nobakht Ersi, Fereydoun; Safari, Abdolreza; Gamse, Sonja

    2016-07-01

    Ground deformation monitoring is valuable to understanding of the behaviour of natural phenomena. Space-Based measurement systems such as Global Positioning System are useful tools for continuous monitoring of ground deformation. Ground deformation analysis based on space geodetic techniques have provided a new, more accurate, and reliable source of information for geodetic positioning which is used to detect deformations of the Ground surface. This type of studies using displacement fields derived from repeated measurments of space-based geodetic networks indicates how crucial role the space geodetic methods play in geodynamics. The main scope of this contribution is to monitor of ground deformation by obtained measurements from GPS sites. We present ground deformation analysis in three steps: a global congruency test on daily coordinates of permanent GPS stations to specify in which epochs deformations occur, the localization of the deformed GPS sites and the determination of deformations.

  1. The “Anchor Shape” Technique for Long Head of the Biceps Tenotomy to Avoid the Popeye Deformity

    OpenAIRE

    Narvani, A. Ali; Atoun, Ehud; Van Tongel, Alexander; Sforza, Giuseppe; Levy, Ofer

    2013-01-01

    Surgical options for symptomatic pathologies of the long head of the biceps (LHB) include tenotomy and tenodesis. Tenotomy is surgically simple and quick, does not require immobilization, and avoids implant complications. However, it is associated with residual “Popeye” muscle deformity and biceps muscle cramps. Tenodesis avoids Popeye deformity, but it is technically a more difficult operation with a longer rehabilitation period and possible implant complications. The purpose of this report ...

  2. CERN Technical Training Programme: Learning for the LHC!

    CERN Multimedia

    2003-01-01

    In collaboration with AS and AC divisions, the Technical Training Programme is launching EVM Hands-on Tutorials specifically designed for those people involved in the current EVM for LHC exercise. The goal of the EVM Hands-on Training Sessions is to provide insight in Earned Value Management as implemented at CERN. Following this course will enable you to understand the EVM methodology, the tools used at CERN, the procedures used for the data-collection and data-reporting and assist you in analysing cost & schedule variances. The course is an intensive 2-hour 'hands-on' training session. If you are interested in this course, please discuss with your supervisor or your DTO. More information and online registration by EDH are available from the Technical Training web pages: http://www.cern.ch/TechnicalTraining/

  3. CERN Technical Training Programme: Learning for the LHC !

    CERN Multimedia

    2003-01-01

    In collaboration with AS and AC divisions, the Technical Training Programme is launching EVM Hands-on Tutorials specifically designed for those people involved in the current EVM for LHC exercise. The goal of the EVM Hands-on Training Sessions is to provide insight in Earned Value Management as implemented at CERN. Following this course will enable you to understand the EVM methodology, the tools used at CERN, the procedures used for the data-collection and data-reporting and assist you in analysing cost & schedule variances. The course is an intensive 2-hour 'hands-on' training session. If you are interested in this course, please discuss with your supervisor or your DTO. More information and online registration by EDH are available from the Technical Training web pages: http://www.cern.ch/TechnicalTraining/

  4. Oak Ridge Institute for Science and Education, Medical Sciences Division report for 1994

    Energy Technology Data Exchange (ETDEWEB)

    Snyder, F.; Poston, S.; Engle, J. [eds.

    1995-08-01

    The primary mission of the Medical Sciences Division is (1) to conduct basic and applied biomedical research on human health related to energy systems, (2) to provide technical assistance and training in occupational and environmental medicine, and (3) to make related biomedical applications available to others through technology transfer. As can be gleaned from this report, the strengths and capabilities of their staff in carrying out this mission are closely aligned with the four core competencies of ORISE: (1) occupational and environmental health, (2) environmental and safety evaluation and analysis, (3) education and training, and (4) enabling research. Brief descriptions of the various scientific and technical programs and their progress, as well as the staff responsible for the accomplishments made during 1994, are presented in this report. Research programs include the following: biochemistry; cytogenetics; Center for Epidemiologic Research; Center for Human Reliability Studies; occupational medicine; Radiation Emergency Assistance Center/Training Site; and Radiation Internal Dose Information Center.

  5. Trends in industrial control systems in ST Division and at CERN

    CERN Document Server

    Ciriani, P

    1998-01-01

    Since the 1970s, industrial systems have been introduced in ST Division and have formed the basis for the overwhelming majority of the equipment for which it is responsible. The first systems were independent and not integrated into the accelerator control networks. This first generation included the Technical Control Room (TCR) site and networks monitoring system supplied by Télémécanique. In 1980, this system was replaced by the BBC and the Landis & Gyr systems for the cooling and ventilation equipment. In 1979, the Sprecher & Schuh system for the control of the electrical generator sets (with CERN's first PLC) was installed. Since the 1980s, these systems have been gradually integrated, initially using G64s as the interface with the PLCs, then, with the introduction of FactoryLink to handle H1 communications based on TCP/IP and, finally, with the Technical Data Server (TDS) and the TCP/IP communication replacing H1.

  6. Polarity in plant asymmetric cell division: Division orientation and cell fate differentiation.

    Science.gov (United States)

    Shao, Wanchen; Dong, Juan

    2016-11-01

    Asymmetric cell division (ACD) is universally required for the development of multicellular organisms. Unlike animal cells, plant cells have a rigid cellulosic extracellular matrix, the cell wall, which provides physical support and forms communication routes. This fundamental difference leads to some unique mechanisms in plants for generating asymmetries during cell division. However, plants also utilize intrinsically polarized proteins to regulate asymmetric signaling and cell division, a strategy similar to the differentiation mechanism found in animals. Current progress suggests that common regulatory modes, i.e. protein spontaneous clustering and cytoskeleton reorganization, underlie protein polarization in both animal and plant cells. Despite these commonalities, it is important to note that intrinsic mechanisms in plants are heavily influenced by extrinsic cues. To control physical asymmetry in cell division, although our understanding is fragmentary thus far, plants might have evolved novel polarization strategies to orientate cell division plane. Recent studies also suggest that the phytohormone auxin, one of the most pivotal small molecules in plant development, regulates ACD in plants. Copyright © 2016. Published by Elsevier Inc.

  7. NCDC Technical Reports

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NCDC Technical Reports is a set of retrospective analyses produced by the Research Customer Service Group and the National Climatic Data Center from 1995 to 2008....

  8. Technical report writing today

    CERN Document Server

    Riordan, Daniel G

    2014-01-01

    "Technical Report Writing Today" provides thorough coverage of technical writing basics, techniques, and applications. Through a practical focus with varied examples and exercises, students internalize the skills necessary to produce clear and effective documents and reports. Project worksheets help students organize their thoughts and prepare for assignments, and focus boxes highlight key information and recent developments in technical communication. Extensive individual and collaborative exercises expose students to different kinds of technical writing problems and solutions. Annotated student examples - more than 100 in all - illustrate different writing styles and approaches to problems. Numerous short and long examples throughout the text demonstrate solutions for handling writing assignments in current career situations. The four-color artwork in the chapter on creating visuals keeps pace with contemporary workplace capabilities. The Tenth Edition offers the latest information on using electronic resum...

  9. Technical Agency in Practice

    DEFF Research Database (Denmark)

    Krummheuer, Antonia Lina

    2015-01-01

    ) description of hybrid networks in which human and non-human actants are granted agency without differentiating different kinds of agency, EMCA focuses on the member's perspectives and the situated construction of technical agency that is made relevant within an ongoing interaction. Based on an EMCA analysis...... of three video recordings of situations in which technical agency is made relevant by the human participants, the paper demonstrates different ways in which agency is granted to technical artefacts. Human participants can treat a technology as communication partner, as an active part (and actant...... in which the human participants orient towards the artefact in different ways; thereby, the construction of technical agency can shift from moment to moment....

  10. Superfund Technical Assistance Grants

    Data.gov (United States)

    U.S. Environmental Protection Agency — This asset includes data related to the Superfund Technical Assistance Grant program, including grant number, award amounts, award dates, period of performance,...

  11. OSH technical reference manual

    Energy Technology Data Exchange (ETDEWEB)

    1993-11-01

    In an evaluation of the Department of Energy (DOE) Occupational Safety and Health programs for government-owned contractor-operated (GOCO) activities, the Department of Labor`s Occupational Safety and Health Administration (OSHA) recommended a technical information exchange program. The intent was to share written safety and health programs, plans, training manuals, and materials within the entire DOE community. The OSH Technical Reference (OTR) helps support the secretary`s response to the OSHA finding by providing a one-stop resource and referral for technical information that relates to safe operations and practice. It also serves as a technical information exchange tool to reference DOE-wide materials pertinent to specific safety topics and, with some modification, as a training aid. The OTR bridges the gap between general safety documents and very specific requirements documents. It is tailored to the DOE community and incorporates DOE field experience.

  12. FAST FLUX TEST FACILITY PERIODIC TECHNICAL REPORT MARCH, APRIL, MAY, JUNE 1970

    Energy Technology Data Exchange (ETDEWEB)

    Wolfe, B.; Cabell, C. P.

    1970-08-01

    This report was prepared by Battelle-Northwest under Contract No. AT (45-1) -1830 for the Atomic Energy Commission, Division of Reactor Development and Technology, to summarize technical progress made in the Fast Flux Test Facility Program during March, April , May and June 1970.

  13. FAST FLUX TEST FACILITY MONTHLY INFORMAL TECHNICAL PROGRESS REPORT MAY 1969

    Energy Technology Data Exchange (ETDEWEB)

    Astley, E. R.; Cabell, C. P.

    1969-06-06

    This report was prepared by Battelle-Northwest under Contract No. AT(45-1)-1830 for the Atomic Energy Commission, Division of Reactor Development and Technology, to summarize technical progress made in the Fast Flux Test Facility Program during May 1969 .

  14. FAST FLUX TEST FACILITY MONTHLY INFORMAL TECHNICAL PROGRESS REPORT SEPTEMBER 1969

    Energy Technology Data Exchange (ETDEWEB)

    Astely, E. R.; Cabell, C. P.

    1969-10-07

    This report was prepared by Battelle-Northwest under Contract No. AT(45-1)-1830 for the Atomic Energy Commission, Division of Reactor Development and Technology, to summarize technical progress made in the Fast Flux Test Facility Program during September 1969.

  15. An Investigation Into the Feasibility of Merging Three Technical Processing Operations Into One Central Unit.

    Science.gov (United States)

    Burns, Robert W., Jr.

    Three contiguous schools in the upper midwest--a teacher's training college and a private four-year college in one state, and a land-grant university in another--were studied to see if their libraries could merge one of their major divisions--technical services--into a single administrative unit. Potential benefits from such a merger were felt to…

  16. FAST FLUX TEST FACILITY MONTHLY INFORMAL TECHNICAL PROGRESS REPORT FEBRUARY 1969

    Energy Technology Data Exchange (ETDEWEB)

    Astley, E. R.

    1969-03-07

    This report was prepared by Battelle-Northwest under Contract No. AT (45-1)-1830 for the Atomic Energy Commission, Division of Reactor Development and Technology, to summarize technical progress made in the Fast Flux Test Facility Program during February 1969.

  17. Naval Surface Warfare Center Dahlgren Division Technical Digest. Advanced Materials Technology

    Science.gov (United States)

    1993-09-01

    Commander) (STS-8) shuttle missions. The results of the Andrew M. Allen (Pilot) EOIM investigations provide much of the cur- Claude Nicollier 119 rent...34 Corrosion. Marine Biofourling - A Review." 1. 1). Cristlowv. anid R. Vol. 49. 19)93. pp. 63-73. c.. ’ripper. Eds.. Morine ’ Riodetei ’r’i-ationi: An, 131. Pope

  18. Naval Surface Warfare Center, Dahlgren Division Technical Digest. Detection Systems and Technology, September 1992

    Science.gov (United States)

    1992-09-01

    ECM) are used, the exponent wide-angle retroreflectors . Aircraft require cock- in Equation (1) changes. For a self-screening pits, cruise missiles and...into the inlet duct, a notorious retroreflector . more sophisticated signal-processing tech- The use of radar-absorbing material to line the niques...parameters it contains. Such models provide N(D/He) - 1/2 or 0.577. The probability of dam - simple first estimates that cant be used in many age. P

  19. Summary Technical Report of Division 14, NDRC. Volume 2. Military Airborne Radar Systems (MARS)

    Science.gov (United States)

    1946-01-01

    be kept in mind in choos - ing the optimum pulse duration and beamwidth. RESTRICTED DESIGN CONSIDERATIONS 181 Reduction of the altitude signal...11. 12. *13. 14. 16. 17. Altitude Return in the AN/APS-6, Eugene W. Cowan, Jr., RL Report 706, Mar. 26, 1945. Div. 14-234.325-M2 Sea-Return...Type C Data Presentation with the Spiral Scan Aircraft Interception System, Eugene W. Cowan, Jr., RL Report 767, OEMsr-262, July 8, 1945. Div. 14-326

  20. Deformable Models for Eye Tracking

    DEFF Research Database (Denmark)

    Vester-Christensen, Martin; Leimberg, Denis; Ersbøll, Bjarne Kjær;

    2005-01-01

    A deformable template method for eye tracking on full face images is presented. The strengths of the method are that it is fast and retains accuracy independently of the resolution. We compare the me\\$\\backslash\\$-thod with a state of the art active contour approach, showing that the heuristic...