WorldWideScience

Sample records for decision support software

  1. Evaluation of selected environmental decision support software

    International Nuclear Information System (INIS)

    Sullivan, T.M.; Moskowitz, P.D.; Gitten, M.

    1997-06-01

    Decision Support Software (DSS) continues to be developed to support analysis of decisions pertaining to environmental management. Decision support systems are computer-based systems that facilitate the use of data, models, and structured decision processes in decision making. The optimal DSS should attempt to integrate, analyze, and present environmental information to remediation project managers in order to select cost-effective cleanup strategies. The optimal system should have a balance between the sophistication needed to address the wide range of complicated sites and site conditions present at DOE facilities, and ease of use (e.g., the system should not require data that is typically unknown and should have robust error checking of problem definition through input, etc.). In the first phase of this study, an extensive review of the literature, the Internet, and discussions with sponsors and developers of DSS led to identification of approximately fifty software packages that met the preceding definition

  2. Decision support software technology demonstration plan

    Energy Technology Data Exchange (ETDEWEB)

    SULLIVAN,T.; ARMSTRONG,A.

    1998-09-01

    The performance evaluation of innovative and alternative environmental technologies is an integral part of the US Environmental Protection Agency's (EPA) mission. Early efforts focused on evaluating technologies that supported the implementation of the Clean Air and Clean Water Acts. In 1986 the Agency began to demonstrate and evaluate the cost and performance of remediation and monitoring technologies under the Superfund Innovative Technology Evaluation (SITE) program (in response to the mandate in the Superfund Amendments and Reauthorization Act of 1986 (SARA)). In 1990, the US Technology Policy was announced. This policy placed a renewed emphasis on making the best use of technology in achieving the national goals of improved quality of life for all Americans, continued economic growth, and national security. In the spirit of the technology policy, the Agency began to direct a portion of its resources toward the promotion, recognition, acceptance, and use of US-developed innovative environmental technologies both domestically and abroad. Decision Support Software (DSS) packages integrate environmental data and simulation models into a framework for making site characterization, monitoring, and cleanup decisions. To limit the scope which will be addressed in this demonstration, three endpoints have been selected for evaluation: Visualization; Sample Optimization; and Cost/Benefit Analysis. Five topics are covered in this report: the objectives of the demonstration; the elements of the demonstration plan; an overview of the Site Characterization and Monitoring Technology Pilot; an overview of the technology verification process; and the purpose of this demonstration plan.

  3. Scalable software architectures for decision support.

    Science.gov (United States)

    Musen, M A

    1999-12-01

    Interest in decision-support programs for clinical medicine soared in the 1970s. Since that time, workers in medical informatics have been particularly attracted to rule-based systems as a means of providing clinical decision support. Although developers have built many successful applications using production rules, they also have discovered that creation and maintenance of large rule bases is quite problematic. In the 1980s, several groups of investigators began to explore alternative programming abstractions that can be used to build decision-support systems. As a result, the notions of "generic tasks" and of reusable problem-solving methods became extremely influential. By the 1990s, academic centers were experimenting with architectures for intelligent systems based on two classes of reusable components: (1) problem-solving methods--domain-independent algorithms for automating stereotypical tasks--and (2) domain ontologies that captured the essential concepts (and relationships among those concepts) in particular application areas. This paper highlights how developers can construct large, maintainable decision-support systems using these kinds of building blocks. The creation of domain ontologies and problem-solving methods is the fundamental end product of basic research in medical informatics. Consequently, these concepts need more attention by our scientific community.

  4. Theory, Software and Testing Examples for Decision Support Systems

    OpenAIRE

    Lewandowski, A.; Wierzbicki, A.P.

    1987-01-01

    Research in methodology of Decision Support Systems is one of the activities within the System and Decision Sciences Program which was initiated seven years ago and is still in the center of interests of SDS. During these years several methodological approaches and software tools have been developed; among others the DIDAS (Dynamic Interactive Decision Analysis and Support) and SCDAS (Selection Committed Decision Analysis and Support). Both methodologies gained a certain level of popularity a...

  5. Reactive Software Agent Anesthesia Decision Support System

    Directory of Open Access Journals (Sweden)

    Grant H. Kruger

    2011-12-01

    Full Text Available Information overload of the anesthesiologist through technological advances have threatened the safety of patients under anesthesia in the operating room (OR. Traditional monitoring and alarm systems provide independent, spatially distributed indices of patient physiological state. This creates the potential to distract caregivers from direct patient care tasks. To address this situation, a novel reactive agent decision support system with graphical human machine interface was developed. The system integrates the disparate data sources available in the operating room, passes the data though a decision matrix comprising a deterministic physiologic rule base established through medical research. Patient care is improved by effecting change to the care environment by displaying risk factors and alerts as an intuitive color coded animation. The system presents a unified, contextually appropriate snapshot of the patient state including current and potential risk factors, and alerts of critical patient events to the operating room team without requiring any user intervention. To validate the efficacy of the system, a retrospective analysis focusing on the hypotension rules were performed. Results show that even with vigilant and highly trained clinicians, deviations from ideal patient care exist and it is here that the proposed system may allow more standardized and improved patient care and potentially outcomes.

  6. Using Clinical Decision Support Software in Health Insurance Company

    Science.gov (United States)

    Konovalov, R.; Kumlander, Deniss

    This paper proposes the idea to use Clinical Decision Support software in Health Insurance Company as a tool to reduce the expenses related to Medication Errors. As a prove that this class of software will help insurance companies reducing the expenses, the research was conducted in eight hospitals in United Arab Emirates to analyze the amount of preventable common Medication Errors in drug prescription.

  7. Decision Support for Software Process Management Teams: An Intelligent Software Agent Approach

    National Research Council Canada - National Science Library

    Church, Lori

    2000-01-01

    ... to market, eliminate redundancy, and ease job stress. This thesis proposes a conceptual model for software process management decision support in the form of an intelligent software agent network...

  8. PROBLEM DESCRIPTIONS FOR THE DECISION SUPPORT SOFTWARE DEMONSTRATION

    Energy Technology Data Exchange (ETDEWEB)

    SULLIVAN,T.; ARMSTRONG,A.; OSLEEB,J.

    1998-09-14

    This demonstration is focused on evaluating the utility of decision support software in addressing environmental problems. Three endpoints have been selected for evaluation: (1) Visualization, (2) Sample Optimization, and (3) Cost/Benefit Analysis. The definitions for these three areas in this program are listed.

  9. A free software tool for the development of decision support systems

    Directory of Open Access Journals (Sweden)

    COLONESE, G

    2008-06-01

    Full Text Available This article describes PostGeoOlap, a free software open source tool for decision support that integrates OLAP (On-Line Analytical Processing and GIS (Geographical Information Systems. Besides describing the tool, we show how it can be used to achieve effective and low cost decision support that is adequate for small and medium companies and for small public offices.

  10. A Decision Support System to Choose Optimal Release Cycle Length in Incremental Software Development Environments

    OpenAIRE

    Suman, Avnish Chandra; Mishra, Saraswati; Anand, Abhinav

    2016-01-01

    In the last few years it has been seen that many software vendors have started delivering projects incrementally with very short release cycles. Best examples of success of this approach has been Ubuntu Operating system that has a 6 months release cycle and popular web browsers such as Google Chrome, Opera, Mozilla Firefox. However there is very little knowledge available to the project managers to validate the chosen release cycle length. We propose a decision support system that...

  11. Identifying the decision to be supported: a review of papers from environmental modelling and software

    Science.gov (United States)

    Sojda, Richard S.; Chen, Serena H.; El Sawah, Sondoss; Guillaume, Joseph H.A.; Jakeman, A.J.; Lautenbach, Sven; McIntosh, Brian S.; Rizzoli, A.E.; Seppelt, Ralf; Struss, Peter; Voinov, Alexey; Volk, Martin

    2012-01-01

    Two of the basic tenets of decision support system efforts are to help identify and structure the decisions to be supported, and to then provide analysis in how those decisions might be best made. One example from wetland management would be that wildlife biologists must decide when to draw down water levels to optimise aquatic invertebrates as food for breeding ducks. Once such a decision is identified, a system or tool to help them make that decision in the face of current and projected climate conditions could be developed. We examined a random sample of 100 papers published from 2001-2011 in Environmental Modelling and Software that used the phrase “decision support system” or “decision support tool”, and which are characteristic of different sectors. In our review, 41% of the systems and tools related to the water resources sector, 34% were related to agriculture, and 22% to the conservation of fish, wildlife, and protected area management. Only 60% of the papers were deemed to be reporting on DSS. This was based on the papers reviewed not having directly identified a specific decision to be supported. We also report on the techniques that were used to identify the decisions, such as formal survey, focus group, expert opinion, or sole judgment of the author(s). The primary underlying modelling system, e.g., expert system, agent based model, Bayesian belief network, geographical information system (GIS), and the like was categorised next. Finally, since decision support typically should target some aspect of unstructured decisions, we subjectively determined to what degree this was the case. In only 23% of the papers reviewed, did the system appear to tackle unstructured decisions. This knowledge should be useful in helping workers in the field develop more effective systems and tools, especially by being exposed to the approaches in different, but related, disciplines. We propose that a standard blueprint for reporting on DSS be developed for

  12. PROMETHEE Method and Sensitivity Analysis in the Software Application for the Support of Decision-Making

    Directory of Open Access Journals (Sweden)

    Petr Moldrik

    2008-01-01

    Full Text Available PROMETHEE is one of methods, which fall into multi-criteria analysis (MCA. The MCA, as the name itself indicates, deals with the evaluation of particular variants according to several criteria. Developed software application (MCA8 for the support of multi-criteria decision-making was upgraded about PROMETHEE method and a graphic tool, which enables the execution of the sensitivity analysis. This analysis is used to ascertain how a given model output depends upon the input parameters. The MCA8 software application with mentioned graphic upgrade was developed for purposes of solving multi-criteria decision tasks. In the MCA8 is possible to perform sensitivity analysis by a simple form – through column graphs. We can change criteria significances (weights in these column graphs directly and watch the changes of the order of variants immediately.

  13. Software Tools For Building Decision-support Models For Flood Emergency Situations

    Science.gov (United States)

    Garrote, L.; Molina, M.; Ruiz, J. M.; Mosquera, J. C.

    The SAIDA decision-support system was developed by the Spanish Ministry of the Environment to provide assistance to decision-makers during flood situations. SAIDA has been tentatively implemented in two test basins: Jucar and Guadalhorce, and the Ministry is currently planning to have it implemented in all major Spanish basins in a few years' time. During the development cycle of SAIDA, the need for providing as- sistance to end-users in model definition and calibration was clearly identified. System developers usually emphasise abstraction and generality with the goal of providing a versatile software environment. End users, on the other hand, require concretion and specificity to adapt the general model to their local basins. As decision-support models become more complex, the gap between model developers and users gets wider: Who takes care of model definition, calibration and validation?. Initially, model developers perform these tasks, but the scope is usually limited to a few small test basins. Before the model enters operational stage, end users must get involved in model construction and calibration, in order to gain confidence in the model recommendations. However, getting the users involved in these activities is a difficult task. The goal of this re- search is to develop representation techniques for simulation and management models in order to define, develop and validate a mechanism, supported by a software envi- ronment, oriented to provide assistance to the end-user in building decision models for the prediction and management of river floods in real time. The system is based on three main building blocks: A library of simulators of the physical system, an editor to assist the user in building simulation models, and a machine learning method to calibrate decision models based on the simulation models provided by the user.

  14. MOIRA Software Framework - Integrated User-friendly Shell for The Environmental Decision Support Systems

    International Nuclear Information System (INIS)

    Hofman, Dmitry; Nordlinder, Sture

    2003-01-01

    MOIRA DSS is a model-based computerised system for the identification of optimal remedial strategies to restore radionuclide contaminated fresh water environment The examples of the questions which decision-maker could address to the system are 'Is lake liming effective in reducing the radiocesium uptake by fish?', C an control of catchment run-off be an effective measure against further redistribution of radionuclides by river?', 'Is sediment removal worthwhile to reduce further contamination of the aquatic environment?'. The MOIRA system could help decision-maker to avoid implementation of inappropriate and expensive countermeasures. MOIRA gives the possibility to predict effeas of implementation of different types of the countermeasures and evaluate both 'ecological' and 'social' effect of the countermeasures. Decision support process using MOIRA DSS can be subdivided to the following steps: Definition of the site-specific environmental and socio-economic parameters using GIS-based data. Unknown site-specific data could be estimated using GIS-based models, default data for the socio-economic parameters, data directly provided by user. Providing data about fallout of the radionuclides. Definition of the time interval for which prognosis will be made. Definition of the alternative strategies of the countermeasures. Evaluation of the sequences of the implementation of the user-defined strategies and 'no actions' strategy using predictive models. Ranking strategies using Multi-Attribute Analysis Module (MAA) Preparation of the recommendations in the form of report. This process requires usage of several computerised tools such as predictive models, multi-attribute analysis software, geographical information system, data base. MOIRA software framework could be used as the basis for the creation of the wide range of the user-friendly and easy-to-learn decision support systems. It can also provide the advanced graphical user interface and data checking system for the

  15. The software architecture of the real-time on-line decision support system 'RODOS'

    International Nuclear Information System (INIS)

    Rafat, M.; Schuele, O.

    1998-01-01

    The RODOS project aims at the development of an integrated and comprehensive real-time on-line decision support system for off-site emergency management of nuclear accidents in Europe, applicable for the vicinity of the release and the early phase up to far distant areas and the later stages of an accident. The architecture of the RODOS software framework is described as a tool for processing and managing a large variety of different types of information, including those which are categorized in terms of meteorology, radiology, economy, emergency actions and countermeasures, rules, preferences, facts, maps, statistics, catalogues, models and methods. The conceptual design of the software structure based on the Client-Server model and the practical co-operation between a set of autonomous applications meeting the user requirements and objectives are discussed. Details of co-operation management are described by explaining the concepts of the inter-module communication, data exchange, control of operation and data model. (author)

  16. Investigating patients' and general practitioners' views of computerised decision support software for the assessment and management of cardiovascular risk

    Directory of Open Access Journals (Sweden)

    Anne Wilson

    2007-01-01

    Conclusion Computer decision support programs are becoming more prevalent, but little is known about their usability and acceptability to both health professionals and consumers. The complexities of cardiovascular risk assessment and management can be adequately managed with such programs. As a contemporary report this study contributes to the growing knowledge required for developers of medical software and decision support systems to better understand the needs of endusers.

  17. A Novel Software Platform Extending Advances in Monitoring Technologies to On-demand Decision Support

    Science.gov (United States)

    Ormerod, R.; Scholl, M.

    2017-12-01

    Rapid evolution is occurring in the monitoring and assessment of air emissions and their impacts. The development of next generation lower cost sensor technologies creates the potential for much more intensive and far-reaching monitoring networks that provide spatially rich data. While much attention at present is being directed at the types and performance characteristics of sensor technologies, it is important also that the full potential of rich data sources be realized. Parallel to sensor developments, software platforms to display and manage data in real time are increasingly common adjuncts to sensor networks. However, the full value of data can be realized by extending platform capabilities to include complex scientific functions that are integrated into an action-oriented management framework. Depending on the purpose and nature of a monitoring network, there will be a variety of potential uses of the data or its derivatives, for example: statistical analysis for policy development, event analysis, real-time issue management including emergency response and complaints, and predictive management. Moving these functions into an on-demand, optionally mobile, environment greatly increases the value and accessibility of the data. Increased interplay between monitoring data and decision-making in an operational environment is optimised by a system that is designed with equal weight on technical robustness and user experience. A system now being used by several regulatory agencies and a larger number of industries in the US, Latin America, Europe, Australia and Asia has been developed to provide a wide range of on-demand decision-support in addition to the basic data collection, display and management that most platforms offer. With stable multi-year operation, the platform, known as Envirosuite, is assisting organisations to both reduce operating costs and improve environmental performance. Some current examples of its application across a range of applications

  18. Software development to support decision making in the selection of nursing diagnoses and interventions for children and adolescents.

    Science.gov (United States)

    Silva, Kenya de Lima; Évora, Yolanda Dora Martinez; Cintra, Camila Santana Justo

    2015-01-01

    to report the development of a software to support decision-making for the selection of nursing diagnoses and interventions for children and adolescents, based on the nomenclature of nursing diagnoses, outcomes and interventions of a university hospital in Paraiba. a methodological applied study based on software engineering, as proposed by Pressman, developed in three cycles, namely: flow chart construction, development of the navigation interface, and construction of functional expressions and programming development. the software consists of administrative and nursing process screens. The assessment is automatically selected according to age group, the nursing diagnoses are suggested by the system after information is inserted, and can be indicated by the nurse. The interventions for the chosen diagnosis are selected by structuring the care plan. the development of this tool used to document the nursing actions will contribute to decision-making and quality of care.

  19. Software development to support decision making in the selection of nursing diagnoses and interventions for children and adolescents

    Directory of Open Access Journals (Sweden)

    Kenya de Lima Silva

    2015-10-01

    Full Text Available Objective: to report the development of a software to support decision-making for the selection of nursing diagnoses and interventions for children and adolescents, based on the nomenclature of nursing diagnoses, outcomes and interventions of a university hospital in Paraiba.Method: a methodological applied study based on software engineering, as proposed by Pressman, developed in three cycles, namely: flow chart construction, development of the navigation interface, and construction of functional expressions and programming development.Result: the software consists of administrative and nursing process screens. The assessment is automatically selected according to age group, the nursing diagnoses are suggested by the system after information is inserted, and can be indicated by the nurse. The interventions for the chosen diagnosis are selected by structuring the care plan.Conclusion: the development of this tool used to document the nursing actions will contribute to decision-making and quality of care.

  20. Paladin Software Support Lab

    Data.gov (United States)

    Federal Laboratory Consortium — The Paladin Software Support Environment (SSE) occupies 2,241 square-feet. It contains the hardware and software tools required to support the Paladin Automatic Fire...

  1. Verification and validation of decision support software: Expert Choice{trademark} and PCM{trademark}

    Energy Technology Data Exchange (ETDEWEB)

    Nguyen, Q.H.; Martin, J.D.

    1994-11-04

    This report documents the verification and validation of two decision support programs: EXPERT CHOICE{trademark} and PCM{trademark}. Both programs use the Analytic Hierarchy Process (AHP) -- or pairwise comparison technique -- developed by Dr. Thomas L. Saaty. In order to provide an independent method for the validating the two programs, the pairwise comparison algorithm was developed for a standard mathematical program. A standard data set -- selecting a car to purchase -- was used with each of the three programs for validation. The results show that both commercial programs performed correctly.

  2. Improving the Reliability of Decision-Support Systems for Nuclear Emergency Management by Leveraging Software Design Diversity

    Directory of Open Access Journals (Sweden)

    Tudor B. Ionescu

    2016-03-01

    Full Text Available This paper introduces a novel method of continuous verification of simulation software used in decision-support systems for nuclear emergency management (DSNE. The proposed approach builds on methods from the field of software reliability engineering, such as N-Version Programming, Recovery Blocks, and Consensus Recovery Blocks. We introduce a new acceptance test for dispersion simulation results and a new voting scheme based on taxonomies of simulation results rather than individual simulation results. The acceptance test and the voter are used in a new scheme, which extends the Consensus Recovery Block method by a database of result taxonomies to support machine-learning. This enables the system to learn how to distinguish correct from incorrect results, with respect to the implemented numerical schemes. Considering that decision-support systems for nuclear emergency management are used in a safety-critical application context, the methods introduced in this paper help improve the reliability of the system and the trustworthiness of the simulation results used by emergency managers in the decision making process. The effectiveness of the approach has been assessed using the atmospheric dispersion forecasts of two test versions of the widely used RODOS DSNE system.

  3. Barriers in developing and using simulation-based decision-support software

    Energy Technology Data Exchange (ETDEWEB)

    Papamichael, Konstantinos; Pal, Vineeta

    2002-03-11

    The need for proper consideration of energy-related performance aspects during building design has been identified since the energy crises of the 1970s. However, energy performance is still considered in a very small fraction of building projects, mainly because proper consideration is very expensive. It requires the use of computational software tools, which are not easy to learn and are time-consuming to use. Several attempts have been made to facilitate the use of energy simulation tools, but none has brought a significant increase in the consideration of energy performance. Energy related performance criteria are still considered only in a small fraction of buildings and, in most cases, after most of the building design is complete. This paper is focused on the main barriers in properly considering energy-related performance aspects in building decisions, which range from sociopolitical, to technical. The paper includes consideration of issues related to the general interest of the building industry in energy performance and environmental impact, current practice trends, modeling capabilities and performance of tools, compatibility of computational models and availability of data. Finally, a strategy for government-industry collaboration towards removing the barriers is presented, along with the main issues that need to be resolved towards potential implementation.

  4. Radwaste Decision Support System

    International Nuclear Information System (INIS)

    Westrom, G.; Vance, J.N.; Gelhaus, F.E.

    1989-01-01

    The purpose of the Radwaste Decision Support System (RDSS) is to provide expert advice, analysis results and instructional material relative to the treatment, handling, transport and disposal of low-level radioactive waste produced in nuclear power plants. This functional specification addresses the following topics: Functions of the RDSS, Relationships and interfaces between the function, Development of the decisions and logic tree structures embodied in waste management, Elements of the database and the characteristics required to support the decision-making process, Specific User requirements for the RDSS, Development of the user interface, Basic software architecture, and Concepts for the RDSS usage including updating and maintenance

  5. Group Decision Process Support

    DEFF Research Database (Denmark)

    Gøtze, John; Hijikata, Masao

    1997-01-01

    Introducing the notion of Group Decision Process Support Systems (GDPSS) to traditional decision-support theorists.......Introducing the notion of Group Decision Process Support Systems (GDPSS) to traditional decision-support theorists....

  6. Agile Acceptance Test-Driven Development of Clinical Decision Support Advisories: Feasibility of Using Open Source Software.

    Science.gov (United States)

    Basit, Mujeeb A; Baldwin, Krystal L; Kannan, Vaishnavi; Flahaven, Emily L; Parks, Cassandra J; Ott, Jason M; Willett, Duwayne L

    2018-04-13

    Moving to electronic health records (EHRs) confers substantial benefits but risks unintended consequences. Modern EHRs consist of complex software code with extensive local configurability options, which can introduce defects. Defects in clinical decision support (CDS) tools are surprisingly common. Feasible approaches to prevent and detect defects in EHR configuration, including CDS tools, are needed. In complex software systems, use of test-driven development and automated regression testing promotes reliability. Test-driven development encourages modular, testable design and expanding regression test coverage. Automated regression test suites improve software quality, providing a "safety net" for future software modifications. Each automated acceptance test serves multiple purposes, as requirements (prior to build), acceptance testing (on completion of build), regression testing (once live), and "living" design documentation. Rapid-cycle development or "agile" methods are being successfully applied to CDS development. The agile practice of automated test-driven development is not widely adopted, perhaps because most EHR software code is vendor-developed. However, key CDS advisory configuration design decisions and rules stored in the EHR may prove amenable to automated testing as "executable requirements." We aimed to establish feasibility of acceptance test-driven development of clinical decision support advisories in a commonly used EHR, using an open source automated acceptance testing framework (FitNesse). Acceptance tests were initially constructed as spreadsheet tables to facilitate clinical review. Each table specified one aspect of the CDS advisory's expected behavior. Table contents were then imported into a test suite in FitNesse, which queried the EHR database to automate testing. Tests and corresponding CDS configuration were migrated together from the development environment to production, with tests becoming part of the production regression test

  7. Architecture Design of Healthcare Software-as-a-Service Platform for Cloud-Based Clinical Decision Support Service

    OpenAIRE

    Oh, Sungyoung; Cha, Jieun; Ji, Myungkyu; Kang, Hyekyung; Kim, Seok; Heo, Eunyoung; Han, Jong Soo; Kang, Hyunggoo; Chae, Hoseok; Hwang, Hee; Yoo, Sooyoung

    2015-01-01

    Objectives To design a cloud computing-based Healthcare Software-as-a-Service (SaaS) Platform (HSP) for delivering healthcare information services with low cost, high clinical value, and high usability. Methods We analyzed the architecture requirements of an HSP, including the interface, business services, cloud SaaS, quality attributes, privacy and security, and multi-lingual capacity. For cloud-based SaaS services, we focused on Clinical Decision Service (CDS) content services, basic functi...

  8. Evaluation and network of EC-decision support systems in the field of hydrological dispersion models and of aquatic radioecological research: assessment of environmental models and software

    International Nuclear Information System (INIS)

    Monte, Luigi; Brittain, John

    2006-02-01

    The present report describes the results of an assessment of state-of-the-art computerised Decision Support Systems based on environmental models for the management of fresh water ecosystems contaminated by radioactive substances. The models are examined and compared to identify their main features, the application domains, the performances, etc., for a rationale of the entire sector in view of the needs of potential users. A similar assessment was performed for the software products implementing the Decision Support Systems. This work was carried out in the frame of the network EVANET-HYDRA financed by the European Commission [it

  9. Evaluation and network of EC-decision support systems in the field of hydrological dispersion models and of aquatic radioecological research: assessment of environmental models and software

    Energy Technology Data Exchange (ETDEWEB)

    Monte, Luigi [ENEA, Roma (Italy). Centro Ricerche Casaccia, Unita Tecnico Scientifica, Protezione e Sviluppo dell' Ambiente e del Territorio, Tecnologie Ambientali; Hofman, Dmitry [Studsvik Radwaste AB, Nykoeping (Sweden); Brittain, John [Oslo Univ., Oslo (Norway)

    2006-02-15

    The present report describes the results of an assessment of state-of-the-art computerised Decision Support Systems based on environmental models for the management of fresh water ecosystems contaminated by radioactive substances. The models are examined and compared to identify their main features, the application domains, the performances, etc., for a rationale of the entire sector in view of the needs of potential users. A similar assessment was performed for the software products implementing the Decision Support Systems. This work was carried out in the frame of the network EVANET-HYDRA financed by the European Commission. [Italian] II presente rapporto descrive i risultati della valutazione dello stato dell'arte di Decision Support Systems sviluppati a livello internazionale per il management degli ecosistemi acquatici contaminati da sostanze radioattive. I modelli sono stati esaminati e confrontati per individuarne le caratteristiche, le funzionalita, i domini di applicazione, ecc. per la sistematizzazione razionale dell'intero settore in vista delle esigenze di degli utenti. Una simile analisi e stata effettuata per i prodotti software che implementano i Decision Support Systems. Il presente lavoro e stato svolto nell'ambito del network EVANET-HYDRA finanziato dalla Commissione Europea.

  10. Architecture Design of Healthcare Software-as-a-Service Platform for Cloud-Based Clinical Decision Support Service.

    Science.gov (United States)

    Oh, Sungyoung; Cha, Jieun; Ji, Myungkyu; Kang, Hyekyung; Kim, Seok; Heo, Eunyoung; Han, Jong Soo; Kang, Hyunggoo; Chae, Hoseok; Hwang, Hee; Yoo, Sooyoung

    2015-04-01

    To design a cloud computing-based Healthcare Software-as-a-Service (SaaS) Platform (HSP) for delivering healthcare information services with low cost, high clinical value, and high usability. We analyzed the architecture requirements of an HSP, including the interface, business services, cloud SaaS, quality attributes, privacy and security, and multi-lingual capacity. For cloud-based SaaS services, we focused on Clinical Decision Service (CDS) content services, basic functional services, and mobile services. Microsoft's Azure cloud computing for Infrastructure-as-a-Service (IaaS) and Platform-as-a-Service (PaaS) was used. The functional and software views of an HSP were designed in a layered architecture. External systems can be interfaced with the HSP using SOAP and REST/JSON. The multi-tenancy model of the HSP was designed as a shared database, with a separate schema for each tenant through a single application, although healthcare data can be physically located on a cloud or in a hospital, depending on regulations. The CDS services were categorized into rule-based services for medications, alert registration services, and knowledge services. We expect that cloud-based HSPs will allow small and mid-sized hospitals, in addition to large-sized hospitals, to adopt information infrastructures and health information technology with low system operation and maintenance costs.

  11. Architecture Design of Healthcare Software-as-a-Service Platform for Cloud-Based Clinical Decision Support Service

    Science.gov (United States)

    Oh, Sungyoung; Cha, Jieun; Ji, Myungkyu; Kang, Hyekyung; Kim, Seok; Heo, Eunyoung; Han, Jong Soo; Kang, Hyunggoo; Chae, Hoseok; Hwang, Hee

    2015-01-01

    Objectives To design a cloud computing-based Healthcare Software-as-a-Service (SaaS) Platform (HSP) for delivering healthcare information services with low cost, high clinical value, and high usability. Methods We analyzed the architecture requirements of an HSP, including the interface, business services, cloud SaaS, quality attributes, privacy and security, and multi-lingual capacity. For cloud-based SaaS services, we focused on Clinical Decision Service (CDS) content services, basic functional services, and mobile services. Microsoft's Azure cloud computing for Infrastructure-as-a-Service (IaaS) and Platform-as-a-Service (PaaS) was used. Results The functional and software views of an HSP were designed in a layered architecture. External systems can be interfaced with the HSP using SOAP and REST/JSON. The multi-tenancy model of the HSP was designed as a shared database, with a separate schema for each tenant through a single application, although healthcare data can be physically located on a cloud or in a hospital, depending on regulations. The CDS services were categorized into rule-based services for medications, alert registration services, and knowledge services. Conclusions We expect that cloud-based HSPs will allow small and mid-sized hospitals, in addition to large-sized hospitals, to adopt information infrastructures and health information technology with low system operation and maintenance costs. PMID:25995962

  12. System support software for TSTA

    International Nuclear Information System (INIS)

    Claborn, G.W.; Mann, L.W.; Nielson, C.W.

    1987-01-01

    The software at the Tritium Systems Test Assembly (TSTA) is logically broken into two parts, the system support software and the subsystem software. The purpose of the system support software is to isolate the subsystem software from the physical hardware. In this sense the system support software forms the kernel of the software at TSTA. The kernel software performs several functions. It gathers data from CAMAC modules and makes that data available for subsystem processes. It services requests to send commands to CAMAC modules. It provides a system of logging functions and provides for a system-wide global program state that allows highly structured interaction between subsystem processes. The kernel's most visible function is to provide the Man-Machine Interface (MMI). The MMI allows the operators a window into the physical hardware and subsystem process state. Finally the kernel provides a data archiving and compression function that allows archival data to be accessed and plotted. Such kernel software as developed and implemented at TSTA is described

  13. MEASUREMENT PROCESS OF SOFTWARE DEVELOPMENT PROJECTS FOR SUPPORTING STRATEGIC BUSINESS OBJECTIVES IN SOFTWARE DEVELOPING COMPANIES

    Directory of Open Access Journals (Sweden)

    Sandra Lais Pedroso

    2013-08-01

    Full Text Available Software developing companies work in a competitive market and are often challenged to make business decisions with impact on competitiveness. Models accessing maturity for software development processes quality, such as CMMI and MPS-BR, comprise process measurements systems (PMS. However, these models are not necessarily suitable to support business decisions, neither to achieve strategic goals. The objective of this work is to analyze how the PMS of software development projects could support business strategies for software developing companies. Results taken from this work show that PMS results from maturity models for software processes can be suited to help evaluating operating capabilities and supporting strategic business decisions.

  14. Decision support systems

    DEFF Research Database (Denmark)

    Jørgensen, L.N.; Noe, E.; Langvad, A.M.

    2007-01-01

    system Crop Protection Online is widely used by advisors and as a learning tool for students. Although the system has been validated in many field trials over the years and has shown reliable results, the number of end-users among farmers has been relatively low during the last 10 years (approximately...... 1000 farmers). A sociological investigation of farmers' decision-making styles in the area of crop protection has shown that arable farmers can be divided into three major groups: (a) system-orientated farmers, (b) experience-based farmers and (c) advisory-orientated farmers. The information required...... by these three groups to make their decisions varies and therefore different ways of using decision support systems need to be provided. Decision support systems need to be developed in close dialogue and collaboration with user groups....

  15. Producing and supporting sharable software

    International Nuclear Information System (INIS)

    Johnstad, H.; Nicholls, J.

    1987-02-01

    A survey is reported that addressed the question of shareable software for the High Energy Physics community. Statistics are compiled for the responses of 54 people attending a conference on the subject of shareable software to a questionnaire which addressed the usefulness of shareable software, preference of programming language, and source management tools. The results are found to reflect a continued need for shareable software in the High Energy Physics community and that this effort be performed in coordination. A strong mandate is also claimed for large facilities to support the community with software and that these facilities should act as distribution points. Considerable interest is expressed in languages other than FORTRAN, and the desire for standards or rules in programming is expressed. A need is identified for source management tools

  16. INTELLIGENT DECISION SUPPORT ON FOREX

    Directory of Open Access Journals (Sweden)

    V. A. Rybak

    2014-01-01

    Full Text Available A new technology of intelligent decision support on Forex, including forming algorithms of trading signals, rules for the training sample based on technical indicators, which have the highest correlation with the price, the method of reducing the number of losing trades, is proposed. The last is based on an analysis of the wave structure of the market, while the beginning of the cycle (the wave number one is offered to be identified using Bill Williams Oscillator (Awesome oscillator. The process chain of constructing neuro-fuzzy model using software package MatLab is described.

  17. Software for the decision making support on the design of natural gas distribution networks; Software de apoio a decisao para o projeto de rede urbanas de distribuicao de gas natural

    Energy Technology Data Exchange (ETDEWEB)

    Goldbarg, Marco C.; Goldbarg, Elizabeth F.G. [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil); Campos, Michel F. [PETROBRAS, Rio de Janeiro, RJ (Brazil)

    2004-07-01

    This work presents a computational system to aid the decision making process of installing new networks to distribute natural gas in an urban area. The system is called POM-DIGAS. The purpose of the software is to optimize the design of natural gas distribution networks. The general optimization problem comprises two combinatorial problems. The first one refers to the definition of the network layout. In this problem the objective is to minimize the total length of the network. The second combinatorial problem considers the pipe size optimization in which one must choose the diameters of the pipes regarding the demand requirements. POM-DIGAS is a composite of models and algorithms developed to tackle the two combinatorial problems. Furthermore, the software has a geographic information mode, a tool to automatically acquire several types of data concerning the project and a mode with distinct flow equations in order to allow the utilization of different methodologies for computing the network flows. The system was applied to a case study developed for the city of Natal, Rio Grande do Norte. This work was supported by RedeGasEnergia, FINEP and PETROBRAS. (author)

  18. Evaluation of the use of decision-support software in carcino-embryonic antigen (CEA-based follow-up of patients with colorectal cancer

    Directory of Open Access Journals (Sweden)

    Verberne Charlotte J

    2012-03-01

    Full Text Available Abstract Background The present paper is a first evaluation of the use of "CEAwatch", a clinical support software system for surgeons for the follow-up of colorectal cancer (CRC patients. This system gathers Carcino-Embryonic Antigen (CEA values and automatically returns a recommendation based on the latest values. Methods Consecutive patients receiving follow-up care for CRC fulfilling our in- and exclusion criteria were identified to participate in this study. From August 2008, when the software was introduced, patients were asked to undergo the software-supported follow-up. Safety of the follow-up, experiences of working with the software, and technical issues were analyzed. Results 245 patients were identified. The software-supported group contained 184 patients; the control group contained 61 patients. The software was safe in finding the same amount of recurrent disease with fewer outpatient visits, and revealed few technical problems. Clinicians experienced a decrease in follow-up workload of up to 50% with high adherence to the follow-up scheme. Conclusion CEAwatch is an efficient software tool helping clinicians working with large numbers of follow-up patients. The number of outpatient visits can safely be reduced, thus significantly decreasing workload for clinicians.

  19. Analysis, Design, and Implementation of a Web-Based Training System for Multi-Criteria Decision Support, Integrating Hypertext, Multimedia-Based Case Studies and Training Software

    National Research Council Canada - National Science Library

    Klein, Donald

    1997-01-01

    .... This research also focuses on the interactive multimedia to enhance learning effectiveness. Additionally, this research incorporates the migration and enhancement of a multiple criteria decision support textbook from print media to electronic media...

  20. The impact of using computer decision-support software in primary care nurse-led telephone triage: interactional dilemmas and conversational consequences.

    Science.gov (United States)

    Murdoch, Jamie; Barnes, Rebecca; Pooler, Jillian; Lattimer, Valerie; Fletcher, Emily; Campbell, John L

    2015-02-01

    Telephone triage represents one strategy to manage demand for face-to-face GP appointments in primary care. Although computer decision-support software (CDSS) is increasingly used by nurses to triage patients, little is understood about how interaction is organized in this setting. Specifically any interactional dilemmas this computer-mediated setting invokes; and how these may be consequential for communication with patients. Using conversation analytic methods we undertook a multi-modal analysis of 22 audio-recorded telephone triage nurse-caller interactions from one GP practice in England, including 10 video-recordings of nurses' use of CDSS during triage. We draw on Goffman's theoretical notion of participation frameworks to make sense of these interactions, presenting 'telling cases' of interactional dilemmas nurses faced in meeting patient's needs and accurately documenting the patient's condition within the CDSS. Our findings highlight troubles in the 'interactional workability' of telephone triage exposing difficulties faced in aligning the proximal and wider distal context that structures CDSS-mediated interactions. Patients present with diverse symptoms, understanding of triage consultations, and communication skills which nurses need to negotiate turn-by-turn with CDSS requirements. Nurses therefore need to have sophisticated communication, technological and clinical skills to ensure patients' presenting problems are accurately captured within the CDSS to determine safe triage outcomes. Dilemmas around how nurses manage and record information, and the issues of professional accountability that may ensue, raise questions about the impact of CDSS and its use in supporting nurses to deliver safe and effective patient care. Copyright © 2014 Elsevier Ltd. All rights reserved.

  1. ANÁLISIS MULTIVARIADO DE DATOS COMO SOPORTE A LA DECISIÓN EN LA SELECCIÓN DE ESTUDIANTES EN PROYECTOS DE SOFTWARE / MULTIVARIATE DATA ANALYSIS AS DECISION MAKING SUPPORT IN STUDENT SELECTION IN SOFTWARE PROJECTS

    Directory of Open Access Journals (Sweden)

    Hugo Arnaldo Martínez-Noriegas

    2013-05-01

    Full Text Available La selección de personal es un proceso vital que tiene influencia directa en el éxito de cualquier organización. En este trabajo tiene como objetivo generar información de soporte a la decisión en la selección de estudiantes para su vinculación a proyectos de software . Para este fin se aplican técnicas del análisis multivariados a las calificaciones obtenidas por estudiantes de segundo año de la carrera Ingeniería en Ciencias Informáticas. Para reducir la cantidad de variables en estudio se utiliza el análisis de componentes principales y basado en la información resumida, se emplea el análisis de cluster para formar 3 grupos. A través del análisis factorial común, se lograron identificar 3 factores latentes que actúan sobre diferentes grupos de asignaturas. La información generada es utilizada como soporte a la toma de decisiones para formular estrategias en el trabajo de formación desde la producción.AbstractPersonnel selection is a vital process that has a direct influence on the success of any organization. This paper aims to generate information for decision support in the selection of students for software projects. The multivariate data analysis techniques are applied to the data set of academic qualifications of Computer Science Engineering´s second year students. The principal component analysis is used in order to reduce the number of variables under study and based in the summarized information, it is utilized the cluster analysis to form 3 groups. Through the factor analysis, it was possible to identify 3 latent factors that act on different groups of subjects. The generated information is used as a support for the decision-making to develop strategies on the training job from production.

  2. Visual Decision Support Tool for Supporting Asset ...

    Science.gov (United States)

    Abstract:Managing urban water infrastructures faces the challenge of jointly dealing with assets of diverse types, useful life, cost, ages and condition. Service quality and sustainability require sound long-term planning, well aligned with tactical and operational planning and management. In summary, the objective of an integrated approach to infrastructure asset management is to assist utilities answer the following questions:•Who are we at present?•What service do we deliver?•What do we own?•Where do we want to be in the long-term?•How do we get there?The AWARE-P approach (www.aware-p.org) offers a coherent methodological framework and a valuable portfolio of software tools. It is designed to assist water supply and wastewater utility decision-makers in their analyses and planning processes. It is based on a Plan-Do-Check-Act process and is in accordance with the key principles of the International Standards Organization (ISO) 55000 standards on asset management. It is compatible with, and complementary to WERF’s SIMPLE framework. The software assists in strategic, tactical, and operational planning, through a non-intrusive, web-based, collaborative environment where objectives and metrics drive IAM planning. It is aimed at industry professionals and managers, as well as at the consultants and technical experts that support them. It is easy to use and maximizes the value of information from multiple existing data sources, both in da

  3. Impact decision support diagrams

    Science.gov (United States)

    Boslough, Mark

    2014-10-01

    One way to frame the job of planetary defense is to “find the optimal approach for finding the optimal approach” to NEO mitigation. This requires a framework for defining in advance what should be done under various circumstances. The two-dimensional action matrix from the recent NRC report “Defending Planet Earth” can be generalized to a notional “Impact Decision Support Diagram” by extending it into a third dimension. The NRC action matrix incorporated two important axes: size and time-to-impact, but probability of impact is also critical (it is part of the definitions of both the Torino and Palermo scales). Uncertainty has been neglected, but is also crucial. It can be incorporated by subsuming it into the NEO size axis by redefining size to be three standard deviations greater than the best estimate, thereby providing a built-in conservative margin. The independent variable is time-to-impact, which is known with high precision. The other two axes are both quantitative assessments of uncertainty and are both time dependent. Thus, the diagram is entirely an expression of uncertainty. The true impact probability is either one or zero, and the true size does not change. The domain contains information about the current uncertainty, which changes with time (as opposed to reality, which does not change).

  4. Decision support for utility environmental risk management

    International Nuclear Information System (INIS)

    Balson, W.E.; Wilson, D.S.

    1991-01-01

    This paper reviews a number of decision support methods developed and applied by Decision Focus Incorporated to help utility personnel manage current environmental problems. This work has been performed for the Environmental Risk Analysis Program of EPRI's Environment Division, and also for a number of electric utilities across the country. These are two distinct types of decision support software tools that have been created: economic risk management and environmental risk analysis. These types differ primarily in the identification of who will make a decision. Economic risk management tools are directed primarily at decisions made by electric utilities. Environmental risk analysis tools are directed primarily at decisions made by legislative or regulatory agencies, about which a utility may wish to comment

  5. Spatial Decision Support Systems

    Directory of Open Access Journals (Sweden)

    Silviu Ioan Bejinariu

    2015-10-01

    Full Text Available The satellite image processing is an important tool for decision making in domains like agriculture, forestry, hydrology, for normal activity tracking but also in special situations caused by natural disasters. In this paper it is proposed a method for forestry surface evaluation in terms of occupied surface and also as number of trees. The segmentation method is based on watershed transform which offers good performances in case the objects to detect have connected borders. The method is applied for automatic multi-temporal analysis of forestry areas and represents a useful instrument for decision makers.

  6. Continuous Decision Support

    Science.gov (United States)

    2015-12-24

    typically either a corporate finance perspective such as net present value, an operations research perspective that treats the issue as a knapsack...117 6.6 +Resources Reactive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118 6.7 ++Resources Reactive with Pearson -Tukey...applying financial methods deals with a class of techniques known as real options methods. [11, 80] In a real options framework, “any corporate decision

  7. A decision support system for on-line leakage localization

    OpenAIRE

    Meseguer, Jordi; Mirats-Tur, Josep M.; Cembrano, Gabriela; Puig, Vicenç; Quevedo, Joseba; Pérez, Ramon; Sanz, Gerard; Ibarra, David

    2014-01-01

    This paper describes a model-driven decision-support system (software tool) implementing a model-based methodology for on-line leakage detection and localization which is useful for a large class of water distribution networks. Since these methods present a certain degree of complexity which limits their use to experts, the proposed software tool focuses on the integration of a method emphasizing its use by water network managers as a decision support system. The proposed software tool integr...

  8. Defining decision making strategies in software ecosystem governance

    DEFF Research Database (Denmark)

    Manikas, Konstantinos; Wnuk, Krzysztof; Shollo, Arisa

    Making the right decisions is an essential part of software ecosystem governance. Decisions related to the governance of a software ecosystem can influence the health of the ecosystem and can result in fostering the success or greatly contributing to the failure of the ecosystem. However, very few...... studies touch upon the decision making of software ecosystem governance. In this paper, we propose decomposing software ecosystem governance into three activities: input or data collection, decision making, and applying actions. We focus on the decision making activity of software ecosystem governance...... and review related literature consisted of software ecosystem governance, organizational decision making, and IT governance. Based on the identified studies, we propose a framework for defining the decision making strategies in the governance of software ecosystems. We identify five decision areas...

  9. Decision support for emergency management

    International Nuclear Information System (INIS)

    Andersen, V.

    1989-05-01

    A short introduction will be given to the Nordic project ''NKA/INF: Information Technology for Accident and Emergency Management'', which is now in its final phase. To perform evaluation of the project, special scenarious have been developed, and experiments based on these will be fulfilled and compared with experiments without use of the decision support system. Furthermore, the succeeding European project, ''IT Support for Emergency Management - ISEM'', with the purpose of developing a decision support system for complex and distributed decision making in emergency management in full scale, will be described and the preliminary conceptual model for the system will be presented. (author)

  10. SOFTWARE SUPPORT FOR RICH PICTURES

    DEFF Research Database (Denmark)

    Valente, Andrea; Marchetti, Emanuela

    2010-01-01

    Rich pictures (RP) are common in object-oriented analysis and design courses, but students seem to have problems in integrating them in their projects' workflow. A new software tool is being developed, specific for RP authoring. To better understand students' issues and working practice with RP...

  11. Software support environment design knowledge capture

    Science.gov (United States)

    Dollman, Tom

    1990-01-01

    The objective of this task is to assess the potential for using the software support environment (SSE) workstations and associated software for design knowledge capture (DKC) tasks. This assessment will include the identification of required capabilities for DKC and hardware/software modifications needed to support DKC. Several approaches to achieving this objective are discussed and interim results are provided: (1) research into the problem of knowledge engineering in a traditional computer-aided software engineering (CASE) environment, like the SSE; (2) research into the problem of applying SSE CASE tools to develop knowledge based systems; and (3) direct utilization of SSE workstations to support a DKC activity.

  12. A Decision Support System for Corporations Cybersecurity Management

    OpenAIRE

    Roldán-Molina, G.; Almache-Cueva, M.; Silva-Rabadão, C.; Yevseyeva, Iryna; Basto-Fernandes, V.

    2017-01-01

    This paper presents ongoing work on a decision aiding software intended to support cyber risks and cyber threats analysis of an information and communications technological infrastructure. The software will help corporations Chief Information Security Officers on cyber security risk analysis, decision-making, prevention measures and risk strategies for the infrastructure and information assets protection.

  13. Clinical Decision Support (CDS) Inventory

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Clinical Decision Support (CDS) Inventory contains descriptions of past and present CDS projects across the Federal Government. It includes Federal projects,...

  14. Sustainable Software Decisions for Long-term Projects (Invited)

    Science.gov (United States)

    Shepherd, A.; Groman, R. C.; Chandler, C. L.; Gaylord, D.; Sun, M.

    2013-12-01

    Adopting new, emerging technologies can be difficult for established projects that are positioned to exist for years to come. In some cases the challenge lies in the pre-existing software architecture. In others, the challenge lies in the fluctuation of resources like people, time and funding. The Biological and Chemical Oceanography Data Management Office (BCO-DMO) was created in late 2006 by combining the data management offices for the U.S. GLOBEC and U.S. JGOFS programs to publish data for researchers funded by the National Science Foundation (NSF). Since its inception, BCO-DMO has been supporting access and discovery of these data through web-accessible software systems, and the office has worked through many of the challenges of incorporating new technologies into its software systems. From migrating human readable, flat file metadata storage into a relational database, and now, into a content management system (Drupal) to incorporating controlled vocabularies, new technologies can radically affect the existing software architecture. However, through the use of science-driven use cases, effective resource management, and loosely coupled software components, BCO-DMO has been able to adapt its existing software architecture to adopt new technologies. One of the latest efforts at BCO-DMO revolves around applying metadata semantics for publishing linked data in support of data discovery. This effort primarily affects the metadata web interface software at http://bco-dmo.org and the geospatial interface software at http://mapservice.bco-dmo.org/. With guidance from science-driven use cases and consideration of our resources, implementation decisions are made using a strategy to loosely couple the existing software systems to the new technologies. The results of this process led to the use of REST web services and a combination of contributed and custom Drupal modules for publishing BCO-DMO's content using the Resource Description Framework (RDF) via an instance of

  15. Use of Mobile Clinical Decision Support Software by Junior Doctors at a UK Teaching Hospital: Identification and Evaluation of Barriers to Engagement.

    Science.gov (United States)

    Patel, Rakesh; Green, William; Shahzad, Muhammad Waseem; Larkin, Chris

    2015-08-13

    Clinical decision support (CDS) tools improve clinical diagnostic decision making and patient safety. The availability of CDS to health care professionals has grown in line with the increased prevalence of apps and smart mobile devices. Despite these benefits, patients may have safety concerns about the use of mobile devices around medical equipment. This research explored the engagement of junior doctors (JDs) with CDS and the perceptions of patients about their use. There were three objectives for this research: (1) to measure the actual usage of CDS tools on mobile devices (mCDS) by JDs, (2) to explore the perceptions of JDs about the drivers and barriers to using mCDS, and (3) to explore the perceptions of patients about the use of mCDS. This study used a mixed-methods approach to study the engagement of JDs with CDS accessed through mobile devices. Usage data were collected on the number of interactions by JDs with mCDS. The perceived drivers and barriers for JDs to using CDS were then explored by interviews. Finally, these findings were contrasted with the perception of patients about the use of mCDS by JDs. Nine of the 16 JDs made a total of 142 recorded interactions with the mCDS over a 4-month period. Only 27 of the 114 interactions (24%) that could be categorized as on-shift or off-shift occurred on-shift. Eight individual, institutional, and cultural barriers to engagement emerged from interviews with the user group. In contrast to reported cautions and concerns about the impact of clinicians' use of mobile phone on patient health and safety, patients had positive perceptions about the use of mCDS. Patients reported positive perceptions toward mCDS. The usage of mCDS to support clinical decision making was considered to be positive as part of everyday clinical practice. The degree of engagement was found to be limited due to a number of individual, institutional, and cultural barriers. The majority of mCDS engagement occurred outside of the workplace

  16. Decision Strategy Research: Policy Support

    International Nuclear Information System (INIS)

    Hardeman, F.

    2000-01-01

    The objective of SCK-CEN's R and D programme on decision strategy research are (1) to support and advise the Belgian authorities on specific problems concerning existing and potential hazards from exposure to ionising radiation, both in normal and emergency situations; (2) to perform research on relevant topics that might have an important impact on decision making related to nuclear applications, including social and economic sciences. Main achievements in this area in 1999 are described

  17. A Mechanized Decision Support System for Academic Scheduling.

    Science.gov (United States)

    1986-03-01

    an operational system called software. The first step in the development phase is Design . Designers destribute software control by factoring the Data...SUBJECT TERMS (Continue on reverse if necessary and identify by block number) ELD GROUP SUB-GROUP Scheduling, Decision Support System , Software Design ...scheduling system . It will also examine software - design techniques to identify the most appropriate method- ology for this problem. " - Chapter 3 will

  18. Decision support using nonparametric statistics

    CERN Document Server

    Beatty, Warren

    2018-01-01

    This concise volume covers nonparametric statistics topics that most are most likely to be seen and used from a practical decision support perspective. While many degree programs require a course in parametric statistics, these methods are often inadequate for real-world decision making in business environments. Much of the data collected today by business executives (for example, customer satisfaction opinions) requires nonparametric statistics for valid analysis, and this book provides the reader with a set of tools that can be used to validly analyze all data, regardless of type. Through numerous examples and exercises, this book explains why nonparametric statistics will lead to better decisions and how they are used to reach a decision, with a wide array of business applications. Online resources include exercise data, spreadsheets, and solutions.

  19. Strategic Planning and Decision Analysis: Presentation of the COSIMA Software System

    DEFF Research Database (Denmark)

    This paper presents a composite decision support system, COSIMA, programmed in MS Excel. COSIMA provides assistance to the decision maker as concerns complex decisions and strategic planning. The COSIMA software is designed as interconnected modules which make it possible to conduct Cost-Benefit...

  20. Reflective approach for software design decision making

    NARCIS (Netherlands)

    Razavian, M.; Tang, A.; Capilla, R.; Lago, P.

    2016-01-01

    Good software design practice is difficult to define and teach. Despite the many software design methods and processes that are available, the quality of software design relies on human factors. We notice from literature and our own experiments that some of these factors concern design reasoning and

  1. Human aspects in software architecture decision making : a literature review

    NARCIS (Netherlands)

    Tang, A.; Razavian, M.; Paech, Barbara; Hesse, T.M.

    2017-01-01

    Despite past efforts, we have little understanding and limited research efforts on how architects make decisions in the real-world settings. It seems that software architecture researchers make implicit assumption that decision making by software architects can be a rational and prescribed process.

  2. Implications of Decision Making Research for Decision Support and Displays

    OpenAIRE

    Morrison, Jeffrey G.; Kelly, Richard T.; Moore, Ronald A.; Hutchins, Susan G.

    1998-01-01

    To appear in J. A. Cannon-Bowers & E. Salas (Eds.), Decision Making Under Stress: Implications for Training and Simulation. A prototype decision support system (DSS) was developed to enhance Navy tactical decision making based on naturalistic decision processes. Displays were developed to support critical decision making tasks through recognition-primed and explanation-based reasoning processes, and cognitive analysis was conducted of the decision making problems faced by Navy ...

  3. A decision support system for corporations cyber security risk management

    OpenAIRE

    Molina, Gabriela del Rocio Roldan

    2017-01-01

    This thesis presents a decision aiding system named C3-SEC (Contex-aware Corporative Cyber Security), developed in the context of a master program at Polytechnic Institute of Leiria, Portugal. The research dimension and the corresponding software development process that followed are presented and validated with an application scenario and case study performed at Universidad de las Fuerzas Armadas ESPE – Ecuador. C3-SEC is a decision aiding software intended to support cyber ri...

  4. Tactical decision making under stress (TADMUS) decision support system

    OpenAIRE

    Morrison, Jeffrey G.; Kelly, Richard T.; Moore, Ronald A.; Hutchins, Susan G.

    1996-01-01

    A prototype decision support system (DSS) was developed to enhance Navy tactical decision making based on naturalistic decision processes. Displays were developed to support critical decision making tasks through recognition-primed and explanation-based reasoning processes and cognitive analysis of the decision making problems faced by Navy tactical officers in a shipboard Combat Information Center. Baseline testing in high intensity, peace keeping, littoral scenarios indicated...

  5. Advanced decision support for winter road maintenance

    Science.gov (United States)

    2008-01-01

    This document provides an overview of the Federal Highway Administration's winter Maintenance Decision Support System (MDSS). The MDSS is a decision support tool that has the ability to provide weather predictions focused toward the road surface. The...

  6. Decisions at hand: a decision support system on handhelds.

    Science.gov (United States)

    Zupan, B; Porenta, A; Vidmar, G; Aoki, N; Bratko, I; Beck, J R

    2001-01-01

    One of the applications of clinical information systems is decision support. Although the advantages of utilizing such aids have never been theoretically disputed, they have been rarely used in practice. The factor that probably often limits the utility of clinical decision support systems is the need for computing power at the very site of decision making--at the place where the patient is interviewed, in discussion rooms, etc. The paper reports on a possible solution to this problem. A decision-support shell LogReg is presented, which runs on a handheld computer. A general schema for handheld-based decision support is also proposed, where decision models are developed on personal computers/workstations, encoded in XML and then transferred to handhelds, where the models are used within a decision support shell. A use case where LogReg has been applied to clinical outcome prediction in crush injury is presented.

  7. Decision-support tools for climate change mitigation planning

    DEFF Research Database (Denmark)

    Puig, Daniel; Aparcana Robles, Sandra Roxana

    . For example, in the case of life-cycle analysis, the evaluation criterion entails that the impacts of interest are examined across the entire life-cycle of the product under study, from extraction of raw materials, to product disposal. Effectively, then, the choice of decision-support tool directs......This document describes three decision-support tools that can aid the process of planning climate change mitigation actions. The phrase ‘decision-support tools’ refers to science-based analytical procedures that facilitate the evaluation of planning options (individually or compared to alternative...... options) against a particular evaluation criterion or set of criteria. Most often decision-support tools are applied with the help of purpose-designed software packages and drawing on specialised databases.The evaluation criteria alluded to above define and characterise each decision-support tool...

  8. SOFTWARE PROCESS ASSESSMENT AND IMPROVEMENT USING MULTICRITERIA DECISION AIDING - CONSTRUCTIVIST

    Directory of Open Access Journals (Sweden)

    Leonardo Ensslin

    2012-12-01

    Full Text Available Software process improvement and software process assessment have received special attention since the 1980s. Some models have been created, but these models rest on a normative approach, where the decision-maker’s participation in a software organization is limited to understanding which process is more relevant to each organization. The proposal of this work is to present the MCDA-C as a constructivist methodology for software process improvement and assessment. The methodology makes it possible to visualize the criteria that must be taken into account according to the decision-makers’ values in the process improvement actions, making it possible to rank actions in the light of specific organizational needs. This process helped the manager of the company studied to focus on and prioritize process improvement actions. This paper offers an empirical understanding of the application of performance evaluation to software process improvement and identifies complementary tools to the normative models presented today.

  9. Integrating Design Decision Management with Model-based Software Development

    DEFF Research Database (Denmark)

    Könemann, Patrick

    Design decisions are continuously made during the development of software systems and are important artifacts for design documentation. Dedicated decision management systems are often used to capture such design knowledge. Most such systems are, however, separated from the design artifacts...... of the system. In model-based software development, where design models are used to develop a software system, outcomes of many design decisions have big impact on design models. The realization of design decisions is often manual and tedious work on design models. Moreover, keeping design models consistent......, or by ignoring the causes. This substitutes manual reviews to some extent. The concepts, implemented in a tool, have been validated with design patterns, refactorings, and domain level tests that comprise a replay of a real project. This proves the applicability of the solution to realistic examples...

  10. Decision support, analytics, and business intelligence

    CERN Document Server

    Power, Daniel J

    2013-01-01

    Competition is becoming more intense and decision makers are encountering increasing complexity, rapid change, and higher levels of risk. In many situations, the solution is more and better computerized decision support, especially analytics and business intelligence. Today managers need to learn about and understand computerized decision support. If a business is to succeed, managers must know much more about information technology solutions. This second edition of a powerful introductory book is targeted at busy managers and MBA students who need to grasp the basics of computerized decision support, including the following: What are analytics? What is a decision support system? How can managers identify opportunities to create innovative computerized support? Inside, the author addresses these questions and some 60 more fundamental questions that are key to understanding the rapidly changing realm of computerized decision support. In a short period of time, you'll "get up to speed" on decision support, anal...

  11. Flexible Decision Support in Dynamic Interorganizational Networks

    NARCIS (Netherlands)

    J. Collins (John); W. Ketter (Wolfgang); M. Gini (Maria)

    2008-01-01

    textabstractAn effective Decision Support System (DSS) should help its users improve decision-making in complex, information-rich, environments. We present a feature gap analysis that shows that current decision support technologies lack important qualities for a new generation of agile business

  12. Decision support in vaccination policies.

    Science.gov (United States)

    Piso, B; Wild, C

    2009-10-09

    Looking across boarders reveals that the national immunization programs of various countries differ in their vaccination schedules and decisions regarding the implementation and funding of new vaccines. The aim of this review is to identify decision aids and crucial criteria for a rational decision-making process on vaccine introduction and to develop a theoretical framework for decision-making based on available literature. Systematic literature search supplemented by hand-search. We identified five published decision aids for vaccine introduction and program planning in industrialized countries. Their comparison revealed an overall similarity with some differences in the approach as well as criteria. Burden of disease and vaccine characteristics play a key role in all decision aids, but authors vary in their views on the significance of cost-effectiveness analyses. Other relevant factors that should be considered before vaccine introduction are discussed to highly differing extents. These factors include the immunization program itself as well as its conformity with other programs, its feasibility, acceptability, and equity, as well as ethical, legal and political considerations. Assuming that the most comprehensive framework possible will not provide a feasible tool for decision-makers, we suggest a stepwise procedure. Though even the best rational approach and most comprehensive evaluation is limited by remaining uncertainties, frameworks provide at least a structured approach to evaluate the various aspects of vaccine implementation decision-making. This process is essential in making consistently sound decisions and will facilitate the public's confidence in the decision and its realization.

  13. Uncertainty modeling and decision support

    International Nuclear Information System (INIS)

    Yager, Ronald R.

    2004-01-01

    We first formulate the problem of decision making under uncertainty. The importance of the representation of our knowledge about the uncertainty in formulating a decision process is pointed out. We begin with a brief discussion of the case of probabilistic uncertainty. Next, in considerable detail, we discuss the case of decision making under ignorance. For this case the fundamental role of the attitude of the decision maker is noted and its subjective nature is emphasized. Next the case in which a Dempster-Shafer belief structure is used to model our knowledge of the uncertainty is considered. Here we also emphasize the subjective choices the decision maker must make in formulating a decision function. The case in which the uncertainty is represented by a fuzzy measure (monotonic set function) is then investigated. We then return to the Dempster-Shafer belief structure and show its relationship to the fuzzy measure. This relationship allows us to get a deeper understanding of the formulation the decision function used Dempster- Shafer framework. We discuss how this deeper understanding allows a decision analyst to better make the subjective choices needed in the formulation of the decision function

  14. Customer Decision Support Systems: Resources for Student Decision Making

    Directory of Open Access Journals (Sweden)

    Cara Okleshen Peters, Ph.D.

    2005-07-01

    Full Text Available This paper highlights the potential of customer decision support systems (CDSS to assist students in education-related decision making. Faculty can use these resources to more effectively advise students on various elements of college life, while students can employ them to more actively participate in their own learning and improve their academic experience. This conceptual paper summarizes consumer decision support systems (CDSS concepts and presents exemplar websites students could utilize to support their education-related decision making. Finally, the authors discuss the potential benefits and drawbacks such resources engender from a student perspective and conclude with directions for future research.

  15. The analytic hierarchy process as a support for decision making

    Directory of Open Access Journals (Sweden)

    Filipović Milanka

    2007-01-01

    Full Text Available The first part of this text deals with a convention site selection as one of the most lucrative areas in the tourism industry. The second part gives a further description of a method for decision making - the analytic hierarchy process. The basic characteristics: hierarchy constructions and pair wise comparison on the given level of the hierarchy are allured. The third part offers an example of application. This example is solved using the Super - Decision software, which is developed as a computer support for the analytic hierarchy process. This indicates that the AHP approach is a useful tool to help support a decision of convention site selection. .

  16. Software development to support decommissioning and waste management strategic planning

    International Nuclear Information System (INIS)

    Williams, John; Warneford, Ian; Harrison, J.

    1997-01-01

    One of the components of the UKAEA's mission is to care for and, at the appropriate time, safely dismantle its radioactive facilities which are no longer in use. To assist in the development of an optimised strategy, AEA Technology was commissioned to produce decision support software. This paper describes the background to the development of the software, its key features and current status, and the lessons learnt during the development. The software, known as UKAEA SPS (Strategic Planning System), is a unique support software package that has been developed to assist in the planning of decommissioning and radioactive waste management. SPS models linked decommissioning and waste management strategies covering all of UKAEA's nuclear liabilities. It has been developed around the database package ACCESS, and runs on Pentium PCs; however, it has many of the features of project planning systems. Its principal outputs are costs, timings and utilisation data for the waste stores, processing facilities, transport and disposal operations displayed at any level of aggregation. This allows programme managers to see easily the effects of changing key parameters in a strategy under development. (author)

  17. Muticriteria decision making model for chosing between open source and non-open source software

    Directory of Open Access Journals (Sweden)

    Edmilson Alves de Moraes

    2008-09-01

    Full Text Available This article proposes the use of a multicriterio method for supporting decision on a problem where the intent is to chose for software given the options of open source and not-open source. The study shows how a method for decison making can be used to provide problem structuration and simplify the decision maker job. The method Analytic Hierarchy Process-AHP is described step-by-step and its benefits and flaws are discussed. Followin the theoretical discussion, a muliple case study is presented, where two companies are to use the decison making method. The analysis was supported by Expert Choice, a software developed based on AHP framework.

  18. Software Package for the Technical Support Centre

    International Nuclear Information System (INIS)

    Tomisa, T.; Skanata, D.; Sucic, B.

    2002-01-01

    The continued radiological surveillance system has been technically improved during the last two years by establishing 11 new automatic stations, so that there are currently 14 locations with installed gamma-monitors for air radiation monitoring on the Croatian national territory. Given that the original system had been designed primarily for gathering data for off-line treatment with the purpose of statistical analyses, the contemporary Radiological Early Warning System (SPRU) approach has demanded developing of a new software by the Technical Support Centre (TPC) in order to allow operators interactive work in the case of emergency situations. The outcome of this development is a software package called DORAP (Automatic Radiological Station Remote Reading), which brings together automatic functions of continual data gathering, daily production of the standard report, distribution of the report by fax, SMS (Short Message Service), SMT (Simple Mail Transfer) and FTP (File Transfer Protocol) as well as generation and distribution of alarms in the case of failure in the system or exceeding of the set radiation intensity values. (author)

  19. Toward the Modularization of Decision Support Systems

    Science.gov (United States)

    Raskin, R. G.

    2009-12-01

    Decision support systems are typically developed entirely from scratch without the use of modular components. This “stovepiped” approach is inefficient and costly because it prevents a developer from leveraging the data, models, tools, and services of other developers. Even when a decision support component is made available, it is difficult to know what problem it solves, how it relates to other components, or even that the component exists, The Spatial Decision Support (SDS) Consortium was formed in 2008 to organize the body of knowledge in SDS within a common portal. The portal identifies the canonical steps in the decision process and enables decision support components to be registered, categorized, and searched. This presentation describes how a decision support system can be assembled from modular models, data, tools and services, based on the needs of the Earth science application.

  20. Risk-based emergency decision support

    International Nuclear Information System (INIS)

    Koerte, Jens

    2003-01-01

    In the present paper we discuss how to assist critical decisions taken under complex, contingent circumstances, with a high degree of uncertainty and short time frames. In such sharp-end decision regimes, standard rule-based decision support systems do not capture the complexity of the situation. At the same time, traditional risk analysis is of little use due to variability in the specific circumstances. How then, can an organisation provide assistance to, e.g. pilots in dealing with such emergencies? A method called 'contingent risk and decision analysis' is presented, to provide decision support for decisions under variable circumstances and short available time scales. The method consists of nine steps of definition, modelling, analysis and criteria definition to be performed 'off-line' by analysts, and procedure generation to transform the analysis result into an operational decision aid. Examples of pilots' decisions in response to sudden vibration in offshore helicopter transport method are used to illustrate the approach

  1. Software architecture as a set of architectural design decisions

    NARCIS (Netherlands)

    Jansen, Anton; Bosch, Jan; Nord, R; Medvidovic, N; Krikhaar, R; Khrhaar, R; Stafford, J; Bosch, J

    2006-01-01

    Software architectures have high costs for change, are complex, and erode during evolution. We believe these problems are partially due to knowledge vaporization. Currently, almost all the knowledge and information about the design decisions the architecture is based on are implicitly embedded in

  2. Decision support for customers in electronic environments

    Directory of Open Access Journals (Sweden)

    František Dařena

    2011-01-01

    Full Text Available Due to the rapid spread of computer technologies into day-to-day lives many purchases or purchase-related decisions are made in the electronic environment of the Web. In order to handle information overload that is the result of the availability of many web-based stores, products and services, consumers use decision support aids that help with need recognition, information retrieval, filtering, comparisons and choice making. Decision support systems (DSS discipline spreads about 40 years back and was mostly focused on assisting managers. However, online environments and decision support in such environments bring new opportunities also to the customers. The focus on decision support for consumers is also not investigated to the large extent and not documented in the literature. Providing customers with well designed decision aids can lead to lower cognitive decision effort associated with the purchase decision which results in significant increase of consumer’s confidence, satisfaction, and cost savings. During decision making process the subjects can chose from several methods (optimizing, reasoning, analogizing, and creating, DSS types (data-, model-, communication-, document-driven, and knowledge-based and benefit from different modern technologies. The paper investigates popular customer decision making aids, such as search, filtering, comparison, ­e-negotiations and auctions, recommendation systems, social network systems, product design applications, communication support etc. which are frequently related to e-commerce applications. Results include the overview of such decision supporting tools, specific examples, classification according the way how the decisions are supported, and possibilities of applications of progressive technologies. The paper thus contributes to the process of development of the interface between companies and the customers where customer decisions take place.

  3. DECISIONS, METHODS AND TECHNIQUES RELATED TO DECISION SUPPORT SYSTEMS (DSS

    Directory of Open Access Journals (Sweden)

    Boghean Florin

    2015-07-01

    Full Text Available Generalised uncertainty, a phenomenon that today’s managers are facing as part of their professional experience, makes it impossible to anticipate the way the business environment will evolve or what will be the consequences of the decisions they plan to implement. Any decision making process within the company entails the simultaneous presence of a number of economic, technical, juridical, human and managerial variables. The development and the approval of a decision is the result of decision making activities developed by the decision maker and sometimes by a decision support team or/and a decision support system (DSS. These aspects related to specific applications of decision support systems in risk management will be approached in this research paper. Decisions in general and management decisions in particular are associated with numerous risks, due to their complexity and increasing contextual orientation. In each business entity, there are concerns with the implementation of risk management in order to improve the likelihood of meeting objectives, the trust of the parties involved, increase the operational safety and security as well as the protection of the environment, minimise losses, improve organisational resilience in order to diminish the negative impact on the organisation and provide a solid foundation for decision making. Since any business entity is considered to be a wealth generator, the analysis of their performance should not be restricted to financial efficiency alone, but will also encompass their economic efficiency as well. The type of research developed in this paper entails different dimensions: conceptual, methodological, as well as empirical testing. Subsequently, the conducted research entails a methodological side, since the conducted activities have resulted in the presentation of a simulation model that is useful in decision making processes on the capital market. The research conducted in the present paper

  4. Decision support system for Wamakersvallei Winery

    CSIR Research Space (South Africa)

    Van Der Merwe, A

    2007-09-01

    Full Text Available The goal of the study is to lend decision support to management a a wine cellar in three areas of expertise, with Wamakersvallei Winery serving as a special case study. This decision support system is to be delivered in the form of Excel spreadsheet...

  5. Web-Based Group Decision Support System: an Economic Application

    Directory of Open Access Journals (Sweden)

    Ion ISTUDOR

    2010-01-01

    Full Text Available Decision Support Systems (DSS form a specific class of computerized information systems that support business and managerial decision-making activities. Making the right decision in business primarily depends on the quality of data. It also depends on the ability to analyze the data with a view to identifying trends that can suggest solutions and strategies. A “cooperative” decision support system means the data are collected, analyzed and then provided to a human agent who can help the system to revise or refine the data. It means that both a human component and computer component work together to come up with the best solution. This paper describes the usage of a software product (Vanguard System to a specific economic application (evaluating the financial risk assuming that the rate of the economic profitability can be under the value of the interest rate.

  6. Decision support in supervisory control

    International Nuclear Information System (INIS)

    Rasmussen, J.; Goodstein, L.P.

    1985-08-01

    It is argued that the supervisory control of complex industrial processes having a potential for serious consequences in case of accidents requires careful consideration of the allocation of decision making between the three main agents of control; namely the designer, the operator and the automatic control system. In particular, it is advocated that instead of continuing their efforts to make their preplanning of responses and countermeasures more and more complete and restricting the operator's initiative, designers should take advantage of modern information technology to make available to the operators their conceptual models and their processing resources so as to allow the operators to function as their extended arm in coping with the plant. Such an interactive decision making activity would thus benefit from this simultaneous availability of the design basis, up-to-date knowledge of plant status and accumualted operational experience. (author)

  7. Using Visualization in Cockpit Decision Support Systems

    Energy Technology Data Exchange (ETDEWEB)

    Aragon, Cecilia R.

    2005-07-01

    In order to safely operate their aircraft, pilots must makerapid decisions based on integrating and processing large amounts ofheterogeneous information. Visual displays are often the most efficientmethod of presenting safety-critical data to pilots in real time.However, care must be taken to ensure the pilot is provided with theappropriate amount of information to make effective decisions and notbecome cognitively overloaded. The results of two usability studies of aprototype airflow hazard visualization cockpit decision support systemare summarized. The studies demonstrate that such a system significantlyimproves the performance of helicopter pilots landing under turbulentconditions. Based on these results, design principles and implicationsfor cockpit decision support systems using visualization arepresented.

  8. Platform decisions supported by gaming

    DEFF Research Database (Denmark)

    Hansen, Poul H. Kyvsgård; Mikkola, Juliana Hsuan

    2007-01-01

    Platform is an ambiguous multidisciplinary concept. The philosophy behind it is easy to communicate and makes intuitively sense. However, the ease in communication does overshadow the high complexity when the concept is implemented. The practical industrial platform implementation challenge can...... be described as being a configuration problem with a high number of variables. These variables are different in nature; they have contradictory influence on the total performance, and, their importance change over time. Consequently, the specific platform decisions become highly complex and the consequences...

  9. DECISION SUPPORT SYSTEM TO SUPPORT DECISION PROCESSES WITH DATA MINING

    OpenAIRE

    Rupnik, Rok; Kukar, Matjaž

    2007-01-01

    Traditional techniques of data analysis do not enable the solution of all kind of problems and for that reason they have become insufficient. This caused a newinterdisciplinary field of data mining to arise, encompassing both classical statistical, and modern machine learning techniques to support the data analysis and knowledge discovery from data. Data mining methods are powerful in dealing with large quantities of data, but on the other hand they are difficult to master by business users t...

  10. 'My kidneys, my choice, decision aid': supporting shared decision making.

    Science.gov (United States)

    Fortnum, Debbie; Smolonogov, Tatiana; Walker, Rachael; Kairaitis, Luke; Pugh, Debbie

    2015-06-01

    For patients with chronic kidney disease (CKD) who are progressing to end-stage kidney disease (ESKD) a decision of whether to undertake dialysis or conservative care is a critical component of the patient journey. Shared decision making for complex decisions such as this could be enhanced by a decision aid, a practice which is well utilised in other disciplines but limited for nephrology. A multidisciplinary team in Australia and New Zealand (ANZ) utilised current decision-making theory and best practice to develop the 'My Kidneys, My Choice', a decision aid for the treatment of kidney disease. A patient-centred, five-sectioned tool is now complete and freely available to all ANZ units to support the ESKD education and shared decision-making process. Distribution and education have occurred across ANZ and evaluation of the decision aid in practice is in the first phase. Development of a new tool such as an ESKD decision aid requires vision, multidisciplinary input and ongoing implementation resources. This tool is being integrated into ANZ, ESKD education practice and is promoting the philosophy of shared decision making. © 2014 European Dialysis and Transplant Nurses Association/European Renal Care Association.

  11. A Hyperknowledge Framework of Decision Support Systems.

    Science.gov (United States)

    Chang, Ai-Mei; And Others

    1994-01-01

    Presents a hyperknowledge framework of decision support systems (DSS). This framework formalizes specifics about system functionality, representation of knowledge, navigation of the knowledge system, and user-interface traits as elements of a DSS environment that conforms closely to human cognitive processes in decision making. (Contains 52…

  12. MINDS - Medical Information Network Decision Support System

    National Research Council Canada - National Science Library

    Armenian, H. K

    2008-01-01

    .... The increase in and complexity of medical data at various levels of resolution has increased the need for system level advancements in clinical decision support systems that provide computer-aided...

  13. Geospatial decision support systems for societal decision making

    Science.gov (United States)

    Bernknopf, R.L.

    2005-01-01

    While science provides reliable information to describe and understand the earth and its natural processes, it can contribute more. There are many important societal issues in which scientific information can play a critical role. Science can add greatly to policy and management decisions to minimize loss of life and property from natural and man-made disasters, to manage water, biological, energy, and mineral resources, and in general, to enhance and protect our quality of life. However, the link between science and decision-making is often complicated and imperfect. Technical language and methods surround scientific research and the dissemination of its results. Scientific investigations often are conducted under different conditions, with different spatial boundaries, and in different timeframes than those needed to support specific policy and societal decisions. Uncertainty is not uniformly reported in scientific investigations. If society does not know that data exist, what the data mean, where to use the data, or how to include uncertainty when a decision has to be made, then science gets left out -or misused- in a decision making process. This paper is about using Geospatial Decision Support Systems (GDSS) for quantitative policy analysis. Integrated natural -social science methods and tools in a Geographic Information System that respond to decision-making needs can be used to close the gap between science and society. The GDSS has been developed so that nonscientists can pose "what if" scenarios to evaluate hypothetical outcomes of policy and management choices. In this approach decision makers can evaluate the financial and geographic distribution of potential policy options and their societal implications. Actions, based on scientific information, can be taken to mitigate hazards, protect our air and water quality, preserve the planet's biodiversity, promote balanced land use planning, and judiciously exploit natural resources. Applications using the

  14. Aggregate assessments support improved operational decision making

    International Nuclear Information System (INIS)

    Bauer, R.

    2003-01-01

    At Darlington Nuclear aggregate assessment of plant conditions is carried out in support of Operational Decision Making. This paper discusses how aggregate assessments have been applied to Operator Workarounds leading to improved prioritisation and alignment of work programs in different departments. As well, aggregate assessment of plant and human performance factors has been carried out to identify criteria which support conservative decision making in the main control room during unit transients. (author)

  15. Practical support for Lean Six Sigma software process definition using IEEE software engineering standards

    CERN Document Server

    Land, Susan K; Walz, John W

    2012-01-01

    Practical Support for Lean Six Sigma Software Process Definition: Using IEEE Software Engineering Standards addresses the task of meeting the specific documentation requirements in support of Lean Six Sigma. This book provides a set of templates supporting the documentation required for basic software project control and management and covers the integration of these templates for their entire product development life cycle. Find detailed documentation guidance in the form of organizational policy descriptions, integrated set of deployable document templates, artifacts required in suppo

  16. Fault Isolation for Shipboard Decision Support

    DEFF Research Database (Denmark)

    Lajic, Zoran; Blanke, Mogens; Nielsen, Ulrik Dam

    2010-01-01

    Fault detection and fault isolation for in-service decision support systems for marine surface vehicles will be presented in this paper. The stochastic wave elevation and the associated ship responses are modeled in the frequency domain. The paper takes as an example fault isolation of a containe......Fault detection and fault isolation for in-service decision support systems for marine surface vehicles will be presented in this paper. The stochastic wave elevation and the associated ship responses are modeled in the frequency domain. The paper takes as an example fault isolation...... to the quality of decisions given to navigators....

  17. Solutions for decision support in university management

    Directory of Open Access Journals (Sweden)

    Andrei STANCIU

    2009-06-01

    Full Text Available The paper proposes an overview of decision support systems in order to define the role of a system to assist decision in university management. The authors present new technologies and the basic concepts of multidimensional data analysis using models of business processes within the universities. Based on information provided by scientific literature and on the authors’ experience, the study aims to define selection criteria in choosing a development environment for designing a support system dedicated to university management. The contributions consist in designing a data warehouse model and models of OLAP analysis to assist decision in university management.

  18. Evaluating Ethical Responsibility in Inverse Decision Support

    Directory of Open Access Journals (Sweden)

    Ahmad M. Kabil

    2012-01-01

    Full Text Available Decision makers have considerable autonomy on how they make decisions and what type of support they receive. This situation places the DSS analyst in a different relationship with the client than his colleagues who support regular MIS applications. This paper addresses an ethical dilemma in “Inverse Decision Support,” when the analyst supports a decision maker who requires justification for a preconceived selection that does not correspond to the best option that resulted from the professional resolution of the problem. An extended application of the AHP model is proposed for evaluating the ethical responsibility in selecting a suboptimal alternative. The extended application is consistent with the Inverse Decision Theory that is used extensively in medical decision making. A survey of decision analysts is used to assess their perspective of using the proposed extended application. The results show that 80% of the respondents felt that the proposed extended application is useful in business practices. 14% of them expanded the usability of the extended application to academic teaching of the ethics theory. The extended application is considered more usable in a country with a higher Transparency International Corruption Perceptions Index (TICPI than in a country with a lower one.

  19. Artificial intelligence and the space station software support environment

    Science.gov (United States)

    Marlowe, Gilbert

    1986-01-01

    In a software system the size of the Space Station Software Support Environment (SSE), no one software development or implementation methodology is presently powerful enough to provide safe, reliable, maintainable, cost effective real time or near real time software. In an environment that must survive one of the most harsh and long life times, software must be produced that will perform as predicted, from the first time it is executed to the last. Many of the software challenges that will be faced will require strategies borrowed from Artificial Intelligence (AI). AI is the only development area mentioned as an example of a legitimate reason for a waiver from the overall requirement to use the Ada programming language for software development. The limits are defined of the applicability of the Ada language Ada Programming Support Environment (of which the SSE is a special case), and software engineering to AI solutions by describing a scenario that involves many facets of AI methodologies.

  20. Towards the Significance of Decision Aid in Building Information Modeling (BIM Software Selection Process

    Directory of Open Access Journals (Sweden)

    Omar Mohd Faizal

    2014-01-01

    Full Text Available Building Information Modeling (BIM has been considered as a solution in construction industry to numerous problems such as delays, increased lead in times and increased costs. This is due to the concept and characteristic of BIM that will reshaped the way construction project teams work together to increase productivity and improve the final project outcomes (cost, time, quality, safety, functionality, maintainability, etc.. As a result, the construction industry has witnesses numerous of BIM software available in market. Each of this software has offers different function, features. Furthermore, the adoption of BIM required high investment on software, hardware and also training expenses. Thus, there is indentified that there is a need of decision aid for appropriated BIM software selection that fulfill the project needs. However, research indicates that there is limited study attempt to guide decision in BIM software selection problem. Thus, this paper highlight the importance of decision making and support for BIM software selection as it is vital to increase productivity, construction project throughout building lifecycle.

  1. Preparing for a decision support system.

    Science.gov (United States)

    Callan, K

    2000-08-01

    The increasing pressure to reduce costs and improve outcomes is driving the health care industry to view information as a competitive advantage. Timely information is required to help reduce inefficiencies and improve patient care. Numerous disparate operational or transactional information systems with inconsistent and often conflicting data are no longer adequate to meet the information needs of integrated care delivery systems and networks in competitive managed care environments. This article reviews decision support system characteristics and describes a process to assess the preparedness of an organization to implement and use decision support systems to achieve a more effective, information-based decision process. Decision support tools included in this article range from reports to data mining.

  2. Intelligent Decision Support in Proportional–Stop-Loss Reinsurance Using Multiple Attribute Decision-Making (MADM

    Directory of Open Access Journals (Sweden)

    Shirley Jie Xuan Wang

    2017-11-01

    Full Text Available This article addresses the possibility of incorporating intelligent decision support systems into reinsurance decision-making. This involves the insurance company and the reinsurance company, and is negotiated through reinsurance intermediaries. The article proposes a decision flow to model the reinsurance design and selection process. This article focuses on adopting more than one optimality criteria under a more generic combinational design of commonly used reinsurance products, i.e., proportional reinsurance and stop-loss reinsurance. In terms of methodology, the significant contribution of the study the incorporation of the well-established decision analysis tool multiple-attribute decision-making (MADM into the modelling of reinsurance selection. To illustrate the feasibility of incorporating intelligent decision supporting systems in the reinsurance market, the study includes a numerical case study using the simulation software @Risk in modeling insurance claims, as well as programming in MATLAB to realize MADM. A list of managerial implications could be drawn from the case study results. Most importantly, when choosing the most appropriate type of reinsurance, insurance companies should base their decisions on multiple measurements instead of single-criteria decision-making models so that their decisions may be more robust.

  3. Tool support for distributed software engineering

    NARCIS (Netherlands)

    Spanjers, H.; Ter Huurne, M.; Bendas, D.; Graaf, B.; Lormans, M.; Van Solingen, R.

    2006-01-01

    Developing a software system in collaboration with other partners, and on different geographical locations is a big challenge for organizations. In this article we first discuss a system that automates build and test processes: SoftFab. This system has been successfully applied in practice in the

  4. Improving the Slum Planning Through Geospatial Decision Support System

    Science.gov (United States)

    Shekhar, S.

    2014-11-01

    In India, a number of schemes and programmes have been launched from time to time in order to promote integrated city development and to enable the slum dwellers to gain access to the basic services. Despite the use of geospatial technologies in planning, the local, state and central governments have only been partially successful in dealing with these problems. The study on existing policies and programmes also proved that when the government is the sole provider or mediator, GIS can become a tool of coercion rather than participatory decision-making. It has also been observed that local level administrators who have adopted Geospatial technology for local planning continue to base decision-making on existing political processes. In this juncture, geospatial decision support system (GSDSS) can provide a framework for integrating database management systems with analytical models, graphical display, tabular reporting capabilities and the expert knowledge of decision makers. This assists decision-makers to generate and evaluate alternative solutions to spatial problems. During this process, decision-makers undertake a process of decision research - producing a large number of possible decision alternatives and provide opportunities to involve the community in decision making. The objective is to help decision makers and planners to find solutions through a quantitative spatial evaluation and verification process. The study investigates the options for slum development in a formal framework of RAY (Rajiv Awas Yojana), an ambitious program of Indian Government for slum development. The software modules for realizing the GSDSS were developed using the ArcGIS and Community -VIZ software for Gulbarga city.

  5. Formalisation for decision support in anaesthesiology

    NARCIS (Netherlands)

    Renardel de Lavalette, G R; Groenboom, R.; Rotterdam, E; van Harmelen, F; ten Teije, A; de Geus, F.

    1997-01-01

    This paper reports on research for decision support for anaesthesiologists at the University Hospital in Groningen, the Netherlands. Based on CAROLA, an existing automated operation documentation system, we designed a support environment that will assist in real-time diagnosis. The core of the work

  6. Clinical Decision Support: Statistical Hopes and Challenges

    Czech Academy of Sciences Publication Activity Database

    Kalina, Jan; Zvárová, Jana

    2016-01-01

    Roč. 4, č. 1 (2016), s. 30-34 ISSN 1805-8698 Grant - others:Nadační fond na opdporu vědy(CZ) Neuron Institutional support: RVO:67985807 Keywords : decision support * data mining * multivariate statistics * psychiatry * information based medicine Subject RIV: BB - Applied Statistics, Operational Research

  7. An expandable software model for collaborative decision making during the whole building life cycle

    International Nuclear Information System (INIS)

    Papamichael, K.; Pal, V.; Bourassa, N.; Loffeld, J.; Capeluto, G.

    2000-01-01

    Decisions throughout the life cycle of a building, from design through construction and commissioning to operation and demolition, require the involvement of multiple interested parties (e.g., architects, engineers, owners, occupants and facility managers). The performance of alternative designs and courses of action must be assessed with respect to multiple performance criteria, such as comfort, aesthetics, energy, cost and environmental impact. Several stand-alone computer tools are currently available that address specific performance issues during various stages of a building's life cycle. Some of these tools support collaboration by providing means for synchronous and asynchronous communications, performance simulations, and monitoring of a variety of performance parameters involved in decisions about a building during building operation. However, these tools are not linked in any way, so significant work is required to maintain and distribute information to all parties. In this paper we describe a software model that provides the data management and process control required for collaborative decision making throughout a building's life cycle. The requirements for the model are delineated addressing data and process needs for decision making at different stages of a building's life cycle. The software model meets these requirements and allows addition of any number of processes and support databases over time. What makes the model infinitely expandable is that it is a very generic conceptualization (or abstraction) of processes as relations among data. The software model supports multiple concurrent users, and facilitates discussion and debate leading to decision making. The software allows users to define rules and functions for automating tasks and alerting all participants to issues that need attention. It supports management of simulated as well as real data and continuously generates information useful for improving performance prediction and

  8. Using Visualization in Cockpit Decision Support Systems

    Science.gov (United States)

    Aragon, Cecilia R.

    2005-01-01

    In order to safely operate their aircraft, pilots must make rapid decisions based on integrating and processing large amounts of heterogeneous information. Visual displays are often the most efficient method of presenting safety-critical data to pilots in real time. However, care must be taken to ensure the pilot is provided with the appropriate amount of information to make effective decisions and not become cognitively overloaded. The results of two usability studies of a prototype airflow hazard visualization cockpit decision support system are summarized. The studies demonstrate that such a system significantly improves the performance of helicopter pilots landing under turbulent conditions. Based on these results, design principles and implications for cockpit decision support systems using visualization are presented.

  9. Decision support system for surface irrigation design

    OpenAIRE

    Gonçalves, José M.; Pereira, L.S.

    2009-01-01

    The SADREG decision support system was developed to help decision makers in the process of design and selection of farm surface irrigation systems to respond to requirements of modernization of surface irrigation—furrow, basin, and border irrigation. It includes a database, simulation models, user-friendly interfaces, and multicriteria analysis models. SADREG is comprised of two components: design and selection. The first component applies database information, and through several si...

  10. Biometric and intelligent decision making support

    CERN Document Server

    Kaklauskas, Arturas

    2015-01-01

    This book presents different methods for analyzing the body language (movement, position, use of personal space, silences, pauses and tone, the eyes, pupil dilation or constriction, smiles, body temperature and the like) for better understanding people’s needs and actions, including biometric data gathering and reading. Different studies described in this book indicate that sufficiently much data, information and knowledge can be gained by utilizing biometric technologies. This is the first, wide-ranging book that is devoted completely to the area of intelligent decision support systems, biometrics technologies and their integrations. This book is designated for scholars, practitioners and doctoral and master’s degree students in various areas and those who are interested in the latest biometric and intelligent decision making support problems and means for their resolutions, biometric and intelligent decision making support systems and the theory and practice of their integration and the opportunities fo...

  11. North Slope Decision Support for Water Resource Planning and Management

    Energy Technology Data Exchange (ETDEWEB)

    Schnabel, William; Brumbelow, Kelly

    2013-03-31

    The objective of this project was to enhance the water resource decision-making process with respect to oil and gas exploration/production activities on Alaska’s North Slope. To this end, a web-based software tool was developed to allow stakeholders to assemble, evaluate, and communicate relevant information between and amongst themselves. The software, termed North Slope Decision Support System (NSDSS), is a visually-referenced database that provides a platform for running complex natural system, planning, and optimization models. The NSDSS design was based upon community input garnered during a series of stakeholder workshops, and the end product software is freely available to all stakeholders via the project website. The tool now resides on servers hosted by the UAF Water and Environmental Research Center, and will remain accessible and free-of-charge for all interested stakeholders. The development of the tool fostered new advances in the area of data evaluation and decision support technologies, and the finished product is envisioned to enhance water resource planning activities on Alaska’s North Slope.

  12. GREENER CHEMICAL PROCESS DESIGN ALTERNATIVES ARE REVEALED USING THE WASTE REDUCTION DECISION SUPPORT SYSTEM (WAR DSS)

    Science.gov (United States)

    The Waste Reduction Decision Support System (WAR DSS) is a Java-based software product providing comprehensive modeling of potential adverse environmental impacts (PEI) predicted to result from newly designed or redesigned chemical manufacturing processes. The purpose of this so...

  13. E-DECIDER Decision Support Gateway For Earthquake Disaster Response

    Science.gov (United States)

    Glasscoe, M. T.; Stough, T. M.; Parker, J. W.; Burl, M. C.; Donnellan, A.; Blom, R. G.; Pierce, M. E.; Wang, J.; Ma, Y.; Rundle, J. B.; Yoder, M. R.

    2013-12-01

    Earthquake Data Enhanced Cyber-Infrastructure for Disaster Evaluation and Response (E-DECIDER) is a NASA-funded project developing capabilities for decision-making utilizing remote sensing data and modeling software in order to provide decision support for earthquake disaster management and response. E-DECIDER incorporates earthquake forecasting methodology and geophysical modeling tools developed through NASA's QuakeSim project in order to produce standards-compliant map data products to aid in decision-making following an earthquake. Remote sensing and geodetic data, in conjunction with modeling and forecasting tools, help provide both long-term planning information for disaster management decision makers as well as short-term information following earthquake events (i.e. identifying areas where the greatest deformation and damage has occurred and emergency services may need to be focused). E-DECIDER utilizes a service-based GIS model for its cyber-infrastructure in order to produce standards-compliant products for different user types with multiple service protocols (such as KML, WMS, WFS, and WCS). The goal is to make complex GIS processing and domain-specific analysis tools more accessible to general users through software services as well as provide system sustainability through infrastructure services. The system comprises several components, which include: a GeoServer for thematic mapping and data distribution, a geospatial database for storage and spatial analysis, web service APIs, including simple-to-use REST APIs for complex GIS functionalities, and geoprocessing tools including python scripts to produce standards-compliant data products. These are then served to the E-DECIDER decision support gateway (http://e-decider.org), the E-DECIDER mobile interface, and to the Department of Homeland Security decision support middleware UICDS (Unified Incident Command and Decision Support). The E-DECIDER decision support gateway features a web interface that

  14. Decision Engines for Software Analysis Using Satisfiability Modulo Theories Solvers

    Science.gov (United States)

    Bjorner, Nikolaj

    2010-01-01

    The area of software analysis, testing and verification is now undergoing a revolution thanks to the use of automated and scalable support for logical methods. A well-recognized premise is that at the core of software analysis engines is invariably a component using logical formulas for describing states and transformations between system states. The process of using this information for discovering and checking program properties (including such important properties as safety and security) amounts to automatic theorem proving. In particular, theorem provers that directly support common software constructs offer a compelling basis. Such provers are commonly called satisfiability modulo theories (SMT) solvers. Z3 is a state-of-the-art SMT solver. It is developed at Microsoft Research. It can be used to check the satisfiability of logical formulas over one or more theories such as arithmetic, bit-vectors, lists, records and arrays. The talk describes some of the technology behind modern SMT solvers, including the solver Z3. Z3 is currently mainly targeted at solving problems that arise in software analysis and verification. It has been applied to various contexts, such as systems for dynamic symbolic simulation (Pex, SAGE, Vigilante), for program verification and extended static checking (Spec#/Boggie, VCC, HAVOC), for software model checking (Yogi, SLAM), model-based design (FORMULA), security protocol code (F7), program run-time analysis and invariant generation (VS3). We will describe how it integrates support for a variety of theories that arise naturally in the context of the applications. There are several new promising avenues and the talk will touch on some of these and the challenges related to SMT solvers. Proceedings

  15. Optimization-based decision support systems for planning problems in processing industries

    OpenAIRE

    Claassen, G.D.H.

    2014-01-01

    Summary Optimization-based decision support systems for planning problems in processing industries Nowadays, efficient planning of material flows within and between supply chains is of vital importance and has become one of the most challenging problems for decision support in practice. The tremendous progress in hard- and software of the past decades was an important gateway for developing computerized systems that are able to support decision making on different levels within enterprises. T...

  16. Decision support systems for major accident prevention in the chemical process industry : A developers' survey

    NARCIS (Netherlands)

    Reniers, Genserik L L; Ale, B. J.M.; Dullaert, W.; Foubert, B.

    2006-01-01

    Solid major accident prevention management is characterized by efficient and effective risk assessments. As a means of addressing the efficiency aspect, decision support analysis software is becoming increasingly available. This paper discusses the results of a survey of decision support tools for

  17. Decision support frameworks and tools for conservation

    Science.gov (United States)

    Schwartz, Mark W.; Cook, Carly N.; Pressey, Robert L.; Pullin, Andrew S.; Runge, Michael C.; Salafsky, Nick; Sutherland, William J.; Williamson, Matthew A.

    2018-01-01

    The practice of conservation occurs within complex socioecological systems fraught with challenges that require transparent, defensible, and often socially engaged project planning and management. Planning and decision support frameworks are designed to help conservation practitioners increase planning rigor, project accountability, stakeholder participation, transparency in decisions, and learning. We describe and contrast five common frameworks within the context of six fundamental questions (why, who, what, where, when, how) at each of three planning stages of adaptive management (project scoping, operational planning, learning). We demonstrate that decision support frameworks provide varied and extensive tools for conservation planning and management. However, using any framework in isolation risks diminishing potential benefits since no one framework covers the full spectrum of potential conservation planning and decision challenges. We describe two case studies that have effectively deployed tools from across conservation frameworks to improve conservation actions and outcomes. Attention to the critical questions for conservation project planning should allow practitioners to operate within any framework and adapt tools to suit their specific management context. We call on conservation researchers and practitioners to regularly use decision support tools as standard practice for framing both practice and research.

  18. Ranking of Business Process Simulation Software Tools with DEX/QQ Hierarchical Decision Model.

    Science.gov (United States)

    Damij, Nadja; Boškoski, Pavle; Bohanec, Marko; Mileva Boshkoska, Biljana

    2016-01-01

    The omnipresent need for optimisation requires constant improvements of companies' business processes (BPs). Minimising the risk of inappropriate BP being implemented is usually performed by simulating the newly developed BP under various initial conditions and "what-if" scenarios. An effectual business process simulations software (BPSS) is a prerequisite for accurate analysis of an BP. Characterisation of an BPSS tool is a challenging task due to the complex selection criteria that includes quality of visual aspects, simulation capabilities, statistical facilities, quality reporting etc. Under such circumstances, making an optimal decision is challenging. Therefore, various decision support models are employed aiding the BPSS tool selection. The currently established decision support models are either proprietary or comprise only a limited subset of criteria, which affects their accuracy. Addressing this issue, this paper proposes a new hierarchical decision support model for ranking of BPSS based on their technical characteristics by employing DEX and qualitative to quantitative (QQ) methodology. Consequently, the decision expert feeds the required information in a systematic and user friendly manner. There are three significant contributions of the proposed approach. Firstly, the proposed hierarchical model is easily extendible for adding new criteria in the hierarchical structure. Secondly, a fully operational decision support system (DSS) tool that implements the proposed hierarchical model is presented. Finally, the effectiveness of the proposed hierarchical model is assessed by comparing the resulting rankings of BPSS with respect to currently available results.

  19. Modem: data exchange among decision support systems

    International Nuclear Information System (INIS)

    Baig, S.; Zaehringer, M.

    2003-01-01

    The aim of the European Research and Development project MODEM (Monitoring Data and Information Exchange Among Decision Support Systems) is to achieve practical improvements for data exchange among decision support systems (DSS). Hence, the results of model calculations become comparable. This is a precondition for harmonised decision making. Based on the analysis of existing procedures, it was decided to use the PUSH-PULL concept. Notifications are actively and automatically sent by the DSS (PUSH). The data can then be downloaded form an in-formation server (PULL). The format of the data is defined in XML (extended markup language). Participants of the project are the DSS: RODOS, ARGOS and RECASS. First, the data is comprised of the source term and meteorological information. Results of the prognoses and measurement data are also to be exchanged. Exercises testing and improving the pro-cedures form an integral part of the project. (orig.)

  20. Software Process Improvement: Supporting the Linking of the Software and the Business Strategies

    Science.gov (United States)

    Albuquerque, Adriano Bessa; Rocha, Ana Regina; Lima, Andreia Cavalcanti

    The market is becoming more and more competitive, a lot of products and services depend of the software product and the software is one of the most important assets, which influence the organizations’ businesses. Considering this context, we can observe that the companies must to deal with the software, developing or acquiring, carefully. One of the perspectives that can help to take advantage of the software, supporting effectively the business, is to invest on the organization’s software processes. This paper presents an approach to evaluate and improve the processes assets of the software organizations, based on internationally well-known standards and process models. This approach is supported by automated tools from the TABA Workstation and is part of a wider improvement strategy constituted of three layers (organizational layer, process execution layer and external entity layer). Moreover, this paper presents the experience of use and their results.

  1. Healthcare performance turned into decision support

    DEFF Research Database (Denmark)

    Sørup, Christian Michel; Jacobsen, Peter

    2013-01-01

    from the healthcare sector, the results obtained could be restricted to this sector. Inclusion of data from Arbejdsmarkedets Tillægspension (ATP) showed no deviation from the results in the healthcare sector. Practical implications – The product of the study is a decision support tool for leaders...

  2. Development of an ecological decision support system

    NARCIS (Netherlands)

    van Beusekom, Frits; Brazier, Frances; Schipper, Piet; Treur, Jan; del Pobil, A.P.

    1998-01-01

    In this paper a knowledge-based decision support system is described that determines the abiotic (chemical and physical) characteristics of a site on the basis of in-homogeneous samples of plant species. Techniques from the area of non-monotonic reasoning are applied to model multi-interpretable

  3. Modeling uncertainty in requirements engineering decision support

    Science.gov (United States)

    Feather, Martin S.; Maynard-Zhang, Pedrito; Kiper, James D.

    2005-01-01

    One inherent characteristic of requrements engineering is a lack of certainty during this early phase of a project. Nevertheless, decisions about requirements must be made in spite of this uncertainty. Here we describe the context in which we are exploring this, and some initial work to support elicitation of uncertain requirements, and to deal with the combination of such information from multiple stakeholders.

  4. Tool Support for Software Lookup Table Optimization

    Directory of Open Access Journals (Sweden)

    Chris Wilcox

    2011-01-01

    Full Text Available A number of scientific applications are performance-limited by expressions that repeatedly call costly elementary functions. Lookup table (LUT optimization accelerates the evaluation of such functions by reusing previously computed results. LUT methods can speed up applications that tolerate an approximation of function results, thereby achieving a high level of fuzzy reuse. One problem with LUT optimization is the difficulty of controlling the tradeoff between performance and accuracy. The current practice of manual LUT optimization adds programming effort by requiring extensive experimentation to make this tradeoff, and such hand tuning can obfuscate algorithms. In this paper we describe a methodology and tool implementation to improve the application of software LUT optimization. Our Mesa tool implements source-to-source transformations for C or C++ code to automate the tedious and error-prone aspects of LUT generation such as domain profiling, error analysis, and code generation. We evaluate Mesa with five scientific applications. Our results show a performance improvement of 3.0× and 6.9× for two molecular biology algorithms, 1.4× for a molecular dynamics program, 2.1× to 2.8× for a neural network application, and 4.6× for a hydrology calculation. We find that Mesa enables LUT optimization with more control over accuracy and less effort than manual approaches.

  5. Text summarization as a decision support aid

    Directory of Open Access Journals (Sweden)

    Workman T

    2012-05-01

    Full Text Available Abstract Background PubMed data potentially can provide decision support information, but PubMed was not exclusively designed to be a point-of-care tool. Natural language processing applications that summarize PubMed citations hold promise for extracting decision support information. The objective of this study was to evaluate the efficiency of a text summarization application called Semantic MEDLINE, enhanced with a novel dynamic summarization method, in identifying decision support data. Methods We downloaded PubMed citations addressing the prevention and drug treatment of four disease topics. We then processed the citations with Semantic MEDLINE, enhanced with the dynamic summarization method. We also processed the citations with a conventional summarization method, as well as with a baseline procedure. We evaluated the results using clinician-vetted reference standards built from recommendations in a commercial decision support product, DynaMed. Results For the drug treatment data, Semantic MEDLINE enhanced with dynamic summarization achieved average recall and precision scores of 0.848 and 0.377, while conventional summarization produced 0.583 average recall and 0.712 average precision, and the baseline method yielded average recall and precision values of 0.252 and 0.277. For the prevention data, Semantic MEDLINE enhanced with dynamic summarization achieved average recall and precision scores of 0.655 and 0.329. The baseline technique resulted in recall and precision scores of 0.269 and 0.247. No conventional Semantic MEDLINE method accommodating summarization for prevention exists. Conclusion Semantic MEDLINE with dynamic summarization outperformed conventional summarization in terms of recall, and outperformed the baseline method in both recall and precision. This new approach to text summarization demonstrates potential in identifying decision support data for multiple needs.

  6. The conceptual foundation of environmental decision support.

    Science.gov (United States)

    Reichert, Peter; Langhans, Simone D; Lienert, Judit; Schuwirth, Nele

    2015-05-01

    Environmental decision support intends to use the best available scientific knowledge to help decision makers find and evaluate management alternatives. The goal of this process is to achieve the best fulfillment of societal objectives. This requires a careful analysis of (i) how scientific knowledge can be represented and quantified, (ii) how societal preferences can be described and elicited, and (iii) how these concepts can best be used to support communication with authorities, politicians, and the public in environmental management. The goal of this paper is to discuss key requirements for a conceptual framework to address these issues and to suggest how these can best be met. We argue that a combination of probability theory and scenario planning with multi-attribute utility theory fulfills these requirements, and discuss adaptations and extensions of these theories to improve their application for supporting environmental decision making. With respect to (i) we suggest the use of intersubjective probabilities, if required extended to imprecise probabilities, to describe the current state of scientific knowledge. To address (ii), we emphasize the importance of value functions, in addition to utilities, to support decisions under risk. We discuss the need for testing "non-standard" value aggregation techniques, the usefulness of flexibility of value functions regarding attribute data availability, the elicitation of value functions for sub-objectives from experts, and the consideration of uncertainty in value and utility elicitation. With respect to (iii), we outline a well-structured procedure for transparent environmental decision support that is based on a clear separation of scientific prediction and societal valuation. We illustrate aspects of the suggested methodology by its application to river management in general and with a small, didactical case study on spatial river rehabilitation prioritization. Copyright © 2015 The Authors. Published by

  7. Risk reduction using DDP (Defect Detection and Prevention): Software support and software applications

    Science.gov (United States)

    Feather, M. S.

    2001-01-01

    Risk assessment and mitigation is the focus of the Defect Detection and Prevention (DDP) process, which has been applied to spacecraft technology assessments and planning, both hardware and software. DDP's major elements and their relevance to core requirement engineering concerns are summarized. The accompanying research demonstration illustrates DDP's tool support, and further customizations for application to software.

  8. Use of Digital Technology and Support Software Programs in the Private Dental Offices in Nevada

    Science.gov (United States)

    Fattore-Bruno, LaDeane

    2009-01-01

    The purpose of this survey research was to determine the diffusion of digital radiography, the electronic oral health record (EOHR), digital intraoral photography, and diagnosis and clinical decision-making support software into the dental offices of Nevada. A cross-sectional survey design was utilized with a random sample of 600 Nevada dentists.…

  9. Decision support for patient care: implementing cybernetics.

    Science.gov (United States)

    Ozbolt, Judy; Ozdas, Asli; Waitman, Lemuel R; Smith, Janis B; Brennan, Grace V; Miller, Randolph A

    2004-01-01

    The application of principles and methods of cybernetics permits clinicians and managers to use feedback about care effectiveness and resource expenditure to improve quality and to control costs. Keys to the process are the specification of therapeutic goals and the creation of an organizational culture that supports the use of feedback to improve care. Daily feedback on the achievement of each patient's therapeutic goals provides tactical decision support, enabling clinicians to adjust care as needed. Monthly or quarterly feedback on aggregated goal achievement for all patients on a clinical pathway provides strategic decision support, enabling clinicians and managers to identify problems with supposed "best practices" and to test hypotheses about solutions. Work is underway at Vanderbilt University Medical Center to implement feedback loops in care and management processes and to evaluate the effects.

  10. Procurement of Systems Acquisition and Support Services Software

    National Research Council Canada - National Science Library

    Gimble, Thomas

    1995-01-01

    The objectives of the audit were to determine whether DIA's contract for software acquisition support was awarded through full and open competition and whether the contract provides the best overall...

  11. Decision support tools for policy and planning

    International Nuclear Information System (INIS)

    Jacyk, P.; Schultz, D.; Spangenberg, L.

    1995-01-01

    A decision support system (DSS) is being developed at the Radioactive Liquid Waste Treatment Facility, Los Alamos National Laboratory (LANL). The DSS will be used to evaluate alternatives for improving LANL's existing central radioactive waste water treatment plant and to evaluate new site-wide liquid waste treatment schemes that are required in order to handle the diverse waste streams produced at LANL. The decision support system consists of interacting modules that perform the following tasks: rigorous process simulation, configuration management, performance analysis, cost analysis, risk analysis, environmental impact assessment, transportation modeling, and local, state, and federal regulation compliance checking. Uncertainty handling techniques are used with these modules and also with a decision synthesis module which combines results from the modules listed above. We believe the DSS being developed can be applied to almost any other industrial water treatment facility with little modification because in most situations the waste streams are less complex, fewer regulations apply, and the political environment is simpler. The techniques being developed are also generally applicable to policy and planning decision support systems in the chemical process industry

  12. Computerized Clinical Decision Support: Contributions from 2015

    Science.gov (United States)

    Bouaud, J.

    2016-01-01

    Summary Objective To summarize recent research and select the best papers published in 2015 in the field of computerized clinical decision support for the Decision Support section of the IMIA yearbook. Method A literature review was performed by searching two bibliographic databases for papers related to clinical decision support systems (CDSSs) and computerized provider order entry (CPOE) systems. The aim was to identify a list of candidate best papers from the retrieved papers that were then peer-reviewed by external reviewers. A consensus meeting between the two section editors and the IMIA editorial team was finally conducted to conclude in the best paper selection. Results Among the 974 retrieved papers, the entire review process resulted in the selection of four best papers. One paper reports on a CDSS routinely applied in pediatrics for more than 10 years, relying on adaptations of the Arden Syntax. Another paper assessed the acceptability and feasibility of an important CPOE evaluation tool in hospitals outside the US where it was developed. The third paper is a systematic, qualitative review, concerning usability flaws of medication-related alerting functions, providing an important evidence-based, methodological contribution in the domain of CDSS design and development in general. Lastly, the fourth paper describes a study quantifying the effect of a complex, continuous-care, guideline-based CDSS on the correctness and completeness of clinicians’ decisions. Conclusions While there are notable examples of routinely used decision support systems, this 2015 review on CDSSs and CPOE systems still shows that, despite methodological contributions, theoretical frameworks, and prototype developments, these technologies are not yet widely spread (at least with their full functionalities) in routine clinical practice. Further research, testing, evaluation, and training are still needed for these tools to be adopted in clinical practice and, ultimately, illustrate

  13. Tsunami early warning and decision support

    Directory of Open Access Journals (Sweden)

    T. Steinmetz

    2010-09-01

    Full Text Available An innovative newly developed modular and standards based Decision Support System (DSS is presented which forms part of the German Indonesian Tsunami Early Warning System (GITEWS. The GITEWS project stems from the effort to implement an effective and efficient Tsunami Early Warning and Mitigation System for the coast of Indonesia facing the Sunda Arc along the islands of Sumatra, Java and Bali. The geological setting along an active continental margin which is very close to densely populated areas is a particularly difficult one to cope with, because potential tsunamis' travel times are thus inherently short. National policies require an initial warning to be issued within the first five minutes after an earthquake has occurred. There is an urgent requirement for an end-to-end solution where the decision support takes the entire warning chain into account. The system of choice is based on pre-computed scenario simulations and rule-based decision support which is delivered to the decision maker through a sophisticated graphical user interface (GUI using information fusion and fast information aggregation to create situational awareness in the shortest time possible. The system also contains risk and vulnerability information which was designed with the far end of the warning chain in mind – it enables the decision maker to base his acceptance (or refusal of the supported decision also on regionally differentiated risk and vulnerability information (see Strunz et al., 2010. While the system strives to provide a warning as quickly as possible, it is not in its proper responsibility to send and disseminate the warning to the recipients. The DSS only broadcasts its messages to a dissemination system (and possibly any other dissemination system which is operated under the responsibility of BMKG – the meteorological, climatological and geophysical service of Indonesia – which also hosts the tsunami early warning center. The system is to be seen

  14. Computational intelligence for decision support in cyber-physical systems

    CERN Document Server

    Ali, A; Riaz, Zahid

    2014-01-01

    This book is dedicated to applied computational intelligence and soft computing techniques with special reference to decision support in Cyber Physical Systems (CPS), where the physical as well as the communication segment of the networked entities interact with each other. The joint dynamics of such systems result in a complex combination of computers, software, networks and physical processes all combined to establish a process flow at system level. This volume provides the audience with an in-depth vision about how to ensure dependability, safety, security and efficiency in real time by making use of computational intelligence in various CPS applications ranging from the nano-world to large scale wide area systems of systems. Key application areas include healthcare, transportation, energy, process control and robotics where intelligent decision support has key significance in establishing dynamic, ever-changing and high confidence future technologies. A recommended text for graduate students and researche...

  15. Intelligent Information System to support decision making.

    Directory of Open Access Journals (Sweden)

    Kathrin Rodríguez Llanes

    2010-06-01

    Full Text Available Making decisions is complicated in a generalized way, the materials and humans resources of the entity we belong to depends on it, such as the fulfillment of its goals. But when the situations are complex, making decisions turns into a very difficult work, due to the great amount of aspects to consider when making the right choice. To make this efficiently the administration must to consult an important volume of information, which generally, is scattered and in any different formats. That’s why appears the need of developing software that crowd together all that information and be capable of, by using powerful search engines and process algorithms improve the good decisions making process. Considering previous explanation, a complete freeware developed product is proposed, this constitutes a generic and multi-platform solution, that using artificial intelligence techniques, specifically the cases based reasoning, gives the possibility to leaders of any institution or organism of making the right choice in any situation.With client-server architecture, this system is consumed from web as a service and it can be perfectly integrated with a management system or the geographic information system to facilitate the business process.

  16. How Social Software Supports Cooperative Practices in a Globally Distributed Software Project

    DEFF Research Database (Denmark)

    Giuffrida, Rosalba; Dittrich, Yvonne

    2014-01-01

    In Global Software Development (GSD), the lack of face- to-face communication is a major challenge and effective computer-mediated practices are necessary. This paper analyzes cooperative practices supported by Social Software (SoSo) in a GSD student project. The empirical results show...... that the role of SoSo is to support informal communication, enabling social talks and metawork, both necessary for establishing and for maintaining effective coordination mechanisms, thus successful cooperation....

  17. Supporting multi-stakeholder environmental decisions.

    Science.gov (United States)

    Hajkowicz, Stefan A

    2008-09-01

    This paper examines how multiple criteria analysis (MCA) can be used to support multi-stakeholder environmental management decisions. It presents a study through which 48 stakeholders from environmental, primary production and community interest groups used MCA to prioritise 30 environmental management problems in the Mackay-Whitsunday region of Queensland, Australia. The MCA model, with procedures for aggregating multi-stakeholder output, was used to inform a final decision on the priority of the region's environmental management problems. The result was used in the region's environmental management plan as required under Australia's Natural Heritage Trust programme. The study shows how relatively simple MCA methods can help stakeholders make group decisions, even when they hold strongly conflicting preferences.

  18. Decision Strategy Research and Policy Support

    International Nuclear Information System (INIS)

    Hardeman, F.

    2002-01-01

    The objective of SCK-CEN's R and D programme on decision strategies and policy support is: (1) to investigate the decision making process, with all its relevant dimensions, in the context of radiation protection or other nuclear issues (with particular emphasis on emergency preparedness); (2) to disseminate knowledge on decision making and nuclear emergencies, including the organisation of training courses, the contribution to manuals or guidelines, the participation in working groups or discussion forums; (3) to assist the authorities and the industry on any topic related to radiation protection and to make expertise and infrastructure available; (4) to participate in and contribute to initiatives related to social sciences and their implementation into SCK-CEN; (5) to co-ordinate efforts of SCK-CEN related to medical applications of ionising radiation. Principal achievements in 2001 are described

  19. Decision Strategy Research and Policy Support

    Energy Technology Data Exchange (ETDEWEB)

    Hardeman, F

    2002-04-01

    The objective of SCK-CEN's R and D programme on decision strategies and policy support is: (1) to investigate the decision making process, with all its relevant dimensions, in the context of radiation protection or other nuclear issues (with particular emphasis on emergency preparedness); (2) to disseminate knowledge on decision making and nuclear emergencies, including the organisation of training courses, the contribution to manuals or guidelines, the participation in working groups or discussion forums; (3) to assist the authorities and the industry on any topic related to radiation protection and to make expertise and infrastructure available; (4) to participate in and contribute to initiatives related to social sciences and their implementation into SCK-CEN; (5) to co-ordinate efforts of SCK-CEN related to medical applications of ionising radiation. Principal achievements in 2001 are described.

  20. Spill operation system decision support system

    International Nuclear Information System (INIS)

    Clark, R.

    1992-01-01

    The MSRC Spill Operation System (SOS) is a tool for the support of decision-making at the time of a catastrophic oil spill. SOS provides MSRC decision-makers with access to information about the source of the spill, the spill environment, and the availability of spill response resources. This system is designed to meet the information needs of a Response Supervisor, an Environmental Advisor, Logistics/Maintenance Supervisor, Operations Supervisor, and the MSRC Regional General Manager. The SOS project Objectives are: (1) integrate currently available data, systems, and technologies; (2) develop an application that effectively supports mobilized operations and can be adapted to support normal operations; (3) ensure that the development of computer applications is driven by user needs and not by technology; and (4) coordinate with government and other industry organizations to avoid duplication of effort. Design Objectives for SOS are: (1) centralize management information storage while decentralizing decision making capabilities; (2) boost User confidence by providing a system that is easy to learn, easy to use, and is open-quotes Sailor Proofclose quotes; and (3) use visualization technology in providing spill related information. This approach includes the use of Geographic Information System (GIS) technology for maps and geographically associated resource; and support MSRC's concept of operation which includes - a swift notification of response personnel; fast mobilization of response resources; and accurate tracking of resources during a spill. MSRC is organized into five responsibility regions

  1. Temporal reasoning for decision support in medicine.

    Science.gov (United States)

    Augusto, Juan Carlos

    2005-01-01

    Handling time-related concepts is essential in medicine. During diagnosis it can make a substantial difference to know the temporal order in which some symptoms occurred or for how long they lasted. During prognosis the potential evolutions of a disease are conceived as a description of events unfolding in time. In therapy planning the different steps of treatment must be applied in a precise order, with a given frequency and for a certain span of time in order to be effective. This article offers a survey on the use of temporal reasoning for decision support-related tasks in medicine. Key publications of the area, mainly circumscribed to the latest two decades, are reviewed and classified according to three important stages of patient treatment requiring decision support: diagnosis, prognosis and therapy planning/management. Other complementary publications, like those on time-centered information storage and retrieval, are also considered as they provide valuable support to the above mentioned three stages. Key areas are highlighted and used to organize the latest contributions. The survey of previous research is followed by an analysis of what can still be improved and what is needed to make the next generation of decision support systems for medicine more effective. It can be observed that although the area has been considerably developed, there are still areas where more research is needed to make time-based systems of widespread use in decision support-related areas of medicine. Several suggestions for further exploration are proposed as a result of the survey.

  2. Recommendations on future development of decision support systems

    DEFF Research Database (Denmark)

    MCarthur, Stephen; Chen, Minjiang; Marinelli, Mattia

    Deliverable 8.3 reports on the consolidation of experiences from visualisation, decision support prototypes experiments and recommendations on future developments of decision support systems......Deliverable 8.3 reports on the consolidation of experiences from visualisation, decision support prototypes experiments and recommendations on future developments of decision support systems...

  3. Development and commissioning of decision support tools for sewerage management.

    Science.gov (United States)

    Manic, G; Printemps, C; Zug, M; Lemoine, C

    2006-01-01

    Managing sewerage systems is a highly complex task due to the dynamic nature of the facilities. Their performance strongly depends on the know-how applied by the operators. In order to define optimal operational settings, two decision support tools based on mathematical models have been developed. Moreover, easy-to-use interfaces have been created as well, aiding operators who presumably do not have the necessary skills to use modelling software. The two developed programs simulate the behaviour of both wastewater treatment plants (WWTP) and sewer network systems, respectively. They have essentially the same structure, including raw data management and statistical analysis, a simulation layer using the application programming interface of the applied software and a layer responsible for the representation of the obtained results. Four user modes are provided in the two software including the simulation of historical data using the applied and novel operational settings, as well as modes concerning prediction of possible operation periods and updates. Concerning the WWTP software, it was successfully installed in Nantes (France) in June 2004. Moreover, the one managing sewer networks has been deployed in Saint-Malo (France) in January 2005. This paper presents the structure of the developed software and the first results obtained during the commissioning phase.

  4. Computer-supported collaborative decision-making

    CERN Document Server

    Filip, Florin Gheorghe; Ciurea, Cristian

    2017-01-01

    This is a book about how management and control decisions are made by persons who collaborate and possibly use the support of an information system. The decision is the result of human conscious activities aiming at choosing a course of action for attaining a certain objective (or a set of objectives). The act of collaboration implies that several entities who work together and share responsibilities to jointly plan, implement and evaluate a program of activities to achieve the common goals. The book is intended to present a balanced view of the domain to include both well-established concepts and a selection of new results in the domains of methods and key technologies. It is meant to answer several questions, such as: a) “How are evolving the business models towards the ever more collaborative schemes?”; b) “What is the role of the decision-maker in the new context?” c) “What are the basic attributes and trends in the domain of decision-supporting information systems?”; d) “Which are the basic...

  5. Knowledge representation for decision support systems

    International Nuclear Information System (INIS)

    Methlie, L.B.

    1985-01-01

    This book is organized into three sections in accordance with the structure of the conference program. First section contains four major papers which were commissioned by the Programme Committee to set the tone for the conference and to provide a structured source of relevant material from contributing disciplines. The second section contains specific papers submitted to the conference, and concerned with the following topics of specific interest: epistemological issues for decision support systems (DSS), capturing organizational knowledge for DSS, complementarity between human and formal DSS, and representations for adaption. The third section contains the short papers on any topic of relevance to the theme of the conference. It is hoped that the two working conferences organized by WG 8.3 will contribute to the development of a coherent knowledge and understanding of the class of computerized information systems called Decision Support Systems. (Auth.)

  6. Decision Support System for Fighter Pilots

    DEFF Research Database (Denmark)

    Randleff, Lars Rosenberg

    2007-01-01

    During a mission over enemy territory a fighter aircraft may be engaged by ground based threats. The pilot can use different measures to avoid the aircraft from being detected by e.g. enemy radar systems. If the enemy detects the aircraft a missile may be fired to seek and destroy the aircraft...... and countermeasures that can be applied to mitigate threats. This work is concerned with finding proper evasive actions when a fighter aircraft is engaged by ground based threats. To help the pilot in deciding on these actions a decision support system may be implemented. The environment in which such a system must....... When new threats occur the decision support system must be able to provide suggestions within a fraction of a second. Since the time it takes to find an optimal solution to the mathematical model can not comply with this requirement solutions are sought using a metaheuristic....

  7. Decision support system to select cover systems

    International Nuclear Information System (INIS)

    Bostick, K.V.

    1995-01-01

    The objective of this technology is to provide risk managers with a defensible, objective way to select capping alternatives for remediating radioactive and mixed waste landfills. The process of selecting containment cover technologies for mixed waste landfills requires consideration of many complex and interrelated technical, regulatory, and economic issues. A Decision Support System (DSS) is needed to integrate the knowledge of experts from scientific, engineering, and management disciplines to help in selecting the best capping practice for the site

  8. A decision support system for forensic entomology

    OpenAIRE

    Morvan , Gildas; Jolly , Daniel; Dupont , Daniel; Kubiak , Philippe

    2007-01-01

    International audience; This paper presents a multiagent-based model of insect development on a dead body and a three layers Decision Support System architecture able to perform retrodictive (abductive) reasoning from multiagent-based models or more generally, complex systems models. This architecture is used in order to compute post-mortem intervals from entomological data sampled on cadavers. Knowing the exact time of a death is fundamental in criminal investigations. Thus, it is necessary ...

  9. Development of piping support structure design software based on PDMS

    International Nuclear Information System (INIS)

    Tang Yongtao; Guan Hui; Su Rongfu; Huang Wei; Mao Huihui

    2014-01-01

    In order to enhance the efficiency of nuclear power process system piping support design, the veracity of interface with support, piping and anchor, and decrease the clash between supports and other disciplines, developed piping support structure design software NPHS based on PDMS independently. That achieved the seamless integration of PDMS and NPHS by method of embedded development, reduce the size of program code, improve the running efficiency; That predigested the 3D modeling and information storage for support parts, that increased the support database opening and maintenance using the special mechanism and configuration of database. The support modeling efficiency due to setting of the connection key point of support parts is improved. Practices in several real nuclear power projects proved that NPHS software is provided with such outstanding performances: quick running, strong stability, accurate data, easy to operate and maintain, and output results satisfied the engineering requirements. (authors)

  10. Effectiveness of an Electronic Performance Support System on Computer Ethics and Ethical Decision-Making Education

    Science.gov (United States)

    Kert, Serhat Bahadir; Uz, Cigdem; Gecu, Zeynep

    2014-01-01

    This study examined the effectiveness of an electronic performance support system (EPSS) on computer ethics education and the ethical decision-making processes. There were five different phases to this ten month study: (1) Writing computer ethics scenarios, (2) Designing a decision-making framework (3) Developing EPSS software (4) Using EPSS in a…

  11. Decision support models for natural gas dispatch

    International Nuclear Information System (INIS)

    Chin, L.; Vollmann, T.E.

    1992-01-01

    A decision support model is presented which will give utilities the support tools to manage the purchasing of natural gas supplies in the most cost effective manner without reducing winter safety stocks to below minimum levels. In Business As Usual (BAU) purchasing quantities vary with the daily forecasts. With Material Requirements Planning (MRP) and Linear Programming (LP), two types of factors are used: seasonal weather and decision rule. Under current practices, BAU simulation uses the least expensive gas source first, then adding successively more expensive sources. Material Requirements Planning is a production planning technique which uses a parent item master production schedule to determine time phased requirements for component points. Where the MPS is the aggregate gas demand forecasts for the contract year. This satisfies daily demand with least expensive gas and uses more expensive when necessary with automatic computation of available-to-promise (ATP) gas a dispacher knows daily when extra gas supplies may be ATP. Linear Programming is a mathematical algorithm used to determine optimal allocations of scarce resources to achieve a desired result. The LP model determines optimal daily gas purchase decisions with respect to supply cost minimization. Using these models, it appears possible to raise gross income margins 6 to 10% with minimal additions of customers and no new gas supply

  12. Decision support models for natural gas dispatch

    Energy Technology Data Exchange (ETDEWEB)

    Chin, L. (Bentley College, Waltham, MA (United States)); Vollmann, T.E. (International Inst. for Management Development, Lausanne (Switzerland))

    A decision support model is presented which will give utilities the support tools to manage the purchasing of natural gas supplies in the most cost effective manner without reducing winter safety stocks to below minimum levels. In Business As Usual (BAU) purchasing quantities vary with the daily forecasts. With Material Requirements Planning (MRP) and Linear Programming (LP), two types of factors are used: seasonal weather and decision rule. Under current practices, BAU simulation uses the least expensive gas source first, then adding successively more expensive sources. Material Requirements Planning is a production planning technique which uses a parent item master production schedule to determine time phased requirements for component points. Where the MPS is the aggregate gas demand forecasts for the contract year. This satisfies daily demand with least expensive gas and uses more expensive when necessary with automatic computation of available-to-promise (ATP) gas a dispacher knows daily when extra gas supplies may be ATP. Linear Programming is a mathematical algorithm used to determine optimal allocations of scarce resources to achieve a desired result. The LP model determines optimal daily gas purchase decisions with respect to supply cost minimization. Using these models, it appears possible to raise gross income margins 6 to 10% with minimal additions of customers and no new gas supply.

  13. A distributed clinical decision support system architecture

    Directory of Open Access Journals (Sweden)

    Shaker H. El-Sappagh

    2014-01-01

    Full Text Available This paper proposes an open and distributed clinical decision support system architecture. This technical architecture takes advantage of Electronic Health Record (EHR, data mining techniques, clinical databases, domain expert knowledge bases, available technologies and standards to provide decision-making support for healthcare professionals. The architecture will work extremely well in distributed EHR environments in which each hospital has its own local EHR, and it satisfies the compatibility, interoperability and scalability objectives of an EHR. The system will also have a set of distributed knowledge bases. Each knowledge base will be specialized in a specific domain (i.e., heart disease, and the model achieves cooperation, integration and interoperability between these knowledge bases. Moreover, the model ensures that all knowledge bases are up-to-date by connecting data mining engines to each local knowledge base. These data mining engines continuously mine EHR databases to extract the most recent knowledge, to standardize it and to add it to the knowledge bases. This framework is expected to improve the quality of healthcare, reducing medical errors and guaranteeing the safety of patients by helping clinicians to make correct, accurate, knowledgeable and timely decisions.

  14. Supporting the evolution of research in software ecosystems

    DEFF Research Database (Denmark)

    Manikas, Konstantinos

    2016-01-01

    with significant lack of software ecosystem specific theories that are solid, mature, generic, and detailed enough to be measurable and transferable. In this study, we intent to come closer to an evolution of the field by supporting the “localization” of research, i.e. the focus on specific types of software...... software ecosystem studies lack deeper investigation of technical and collaborative aspects. Moreover, we identify an increased focus on organizational aspects and a rather limited focus on business. Furthermore, we identify common technology as the component investigated most in the ecosystems, both from...

  15. Evaluation of Agricultural Accounting Software. Improved Decision Making. Third Edition.

    Science.gov (United States)

    Lovell, Ashley C., Comp.

    Following a discussion of the evaluation criteria for choosing accounting software, this guide contains reviews of 27 accounting software programs that could be used by farm or ranch business managers. The information in the reviews was provided by the software vendors and covers the following points for each software package: general features,…

  16. Modelling and Decision Support of Clinical Pathways

    Science.gov (United States)

    Gabriel, Roland; Lux, Thomas

    The German health care market is under a rapid rate of change, forcing especially hospitals to provide high-quality services at low costs. Appropriate measures for more effective and efficient service provision are process orientation and decision support by information technology of clinical pathway of a patient. The essential requirements are adequate modelling of clinical pathways as well as usage of adequate systems, which are capable of assisting the complete path of a patient within a hospital, and preferably also outside of it, in a digital way. To fulfil these specifications the authors present a suitable concept, which meets the challenges of well-structured clinical pathways as well as rather poorly structured diagnostic and therapeutic decisions, by interplay of process-oriented and knowledge-based hospital information systems.

  17. System for decision analysis support on complex waste management issues

    International Nuclear Information System (INIS)

    Shropshire, D.E.

    1997-01-01

    A software system called the Waste Flow Analysis has been developed and applied to complex environmental management processes for the United States Department of Energy (US DOE). The system can evaluate proposed methods of waste retrieval, treatment, storage, transportation, and disposal. Analysts can evaluate various scenarios to see the impacts to waste slows and schedules, costs, and health and safety risks. Decision analysis capabilities have been integrated into the system to help identify preferred alternatives based on a specific objectives may be to maximize the waste moved to final disposition during a given time period, minimize health risks, minimize costs, or combinations of objectives. The decision analysis capabilities can support evaluation of large and complex problems rapidly, and under conditions of variable uncertainty. The system is being used to evaluate environmental management strategies to safely disposition wastes in the next ten years and reduce the environmental legacy resulting from nuclear material production over the past forty years

  18. Simulation software support (S3) system a software testing and debugging tool

    International Nuclear Information System (INIS)

    Burgess, D.C.; Mahjouri, F.S.

    1990-01-01

    The largest percentage of technical effort in the software development process is accounted for debugging and testing. It is not unusual for a software development organization to spend over 50% of the total project effort on testing. In the extreme, testing of human-rated software (e.g., nuclear reactor monitoring, training simulator) can cost three to five times as much as all other software engineering steps combined. The Simulation Software Support (S 3 ) System, developed by the Link-Miles Simulation Corporation is ideally suited for real-time simulation applications which involve a large database with models programmed in FORTRAN. This paper will focus on testing elements of the S 3 system. In this paper system support software utilities are provided which enable the loading and execution of modules in the development environment. These elements include the Linking/Loader (LLD) for dynamically linking program modules and loading them into memory and the interactive executive (IEXEC) for controlling the execution of the modules. Features of the Interactive Symbolic Debugger (SD) and the Real Time Executive (RTEXEC) to support the unit and integrated testing will be explored

  19. Operator decision support system for sodium loop

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Kwang Hyeang; Park, Kyu Ho; Kim, Tak Kon; Jo, Choong Ho; Seong, Kyeong A; Lee, Keon Myeong; Kim, Yeong Dal; Kim, Chang Beom; Kim, Jong Kyu; Jo, Hee Chang; Lee, Ji Hyeong; Jeong, Yoon Soo; Chio, Jong Hyeong; Jeong, Bong Joon; Hong, Joon Seong; Kim, Bong Wan; Seong, Byeong Hak [Korea Advanced Institute Science and Technology, Taejon (Korea, Republic of)

    1994-07-01

    The objective of this study is to develop an operator decision support system by computerizing the sodium circuit. This study developed graphical display interface for the control panel which provides the safety control of equipment, the recognition of experimental process states and sodium circuit states. In this study, basic work to develop an operator decision support real-time expert system for sodium loop was carried out. Simplification of control commands and effective operation of various real-time data and signals by equipment code standardization are studied. The cost ineffectiveness of the single processor structure provides the ground for the development of cost effective parallel processing system. The important tasks of this study are (1) design and implementation of control state surveillance panel of sodium loop, (2) requirement analysis of operator support real-time expert system for sodium loop, (3) design of standard code rule for operating equipment and research on the cost effective all purpose parallel processing system and (4) requirement analysis of expert system and design of control state variables and user interface for experimental process. 10 refs., 36 figs., 20 tabs.

  20. Development of output user interface software to support analysis

    Energy Technology Data Exchange (ETDEWEB)

    Wahanani, Nursinta Adi, E-mail: sintaadi@batan.go.id; Natsir, Khairina, E-mail: sintaadi@batan.go.id; Hartini, Entin, E-mail: sintaadi@batan.go.id [Center for Development of Nuclear Informatics - National Nuclear Energy Agency, PUSPIPTEK, Serpong, Tangerang, Banten (Indonesia)

    2014-09-30

    Data processing software packages such as VSOP and MCNPX are softwares that has been scientifically proven and complete. The result of VSOP and MCNPX are huge and complex text files. In the analyze process, user need additional processing like Microsoft Excel to show informative result. This research develop an user interface software for output of VSOP and MCNPX. VSOP program output is used to support neutronic analysis and MCNPX program output is used to support burn-up analysis. Software development using iterative development methods which allow for revision and addition of features according to user needs. Processing time with this software 500 times faster than with conventional methods using Microsoft Excel. PYTHON is used as a programming language, because Python is available for all major operating systems: Windows, Linux/Unix, OS/2, Mac, Amiga, among others. Values that support neutronic analysis are k-eff, burn-up and mass Pu{sup 239} and Pu{sup 241}. Burn-up analysis used the mass inventory values of actinide (Thorium, Plutonium, Neptunium and Uranium). Values are visualized in graphical shape to support analysis.

  1. Development of output user interface software to support analysis

    International Nuclear Information System (INIS)

    Wahanani, Nursinta Adi; Natsir, Khairina; Hartini, Entin

    2014-01-01

    Data processing software packages such as VSOP and MCNPX are softwares that has been scientifically proven and complete. The result of VSOP and MCNPX are huge and complex text files. In the analyze process, user need additional processing like Microsoft Excel to show informative result. This research develop an user interface software for output of VSOP and MCNPX. VSOP program output is used to support neutronic analysis and MCNPX program output is used to support burn-up analysis. Software development using iterative development methods which allow for revision and addition of features according to user needs. Processing time with this software 500 times faster than with conventional methods using Microsoft Excel. PYTHON is used as a programming language, because Python is available for all major operating systems: Windows, Linux/Unix, OS/2, Mac, Amiga, among others. Values that support neutronic analysis are k-eff, burn-up and mass Pu 239 and Pu 241 . Burn-up analysis used the mass inventory values of actinide (Thorium, Plutonium, Neptunium and Uranium). Values are visualized in graphical shape to support analysis

  2. Using software metrics and software reliability models to attain acceptable quality software for flight and ground support software for avionic systems

    Science.gov (United States)

    Lawrence, Stella

    1992-01-01

    This paper is concerned with methods of measuring and developing quality software. Reliable flight and ground support software is a highly important factor in the successful operation of the space shuttle program. Reliability is probably the most important of the characteristics inherent in the concept of 'software quality'. It is the probability of failure free operation of a computer program for a specified time and environment.

  3. Handling risk attitudes for preference learning and intelligent decision support

    DEFF Research Database (Denmark)

    Franco de los Ríos, Camilo; Hougaard, Jens Leth; Nielsen, Kurt

    2015-01-01

    Intelligent decision support should allow integrating human knowledge with efficient algorithms for making interpretable and useful recommendations on real world decision problems. Attitudes and preferences articulate and come together under a decision process that should be explicitly modeled...

  4. The Challenges of the "Software Support for Industrial Controls" Contract

    CERN Document Server

    Ninin, P

    2000-01-01

    ST division is currently specifying a 'Software Support for Industrial Controls' contract. The application of this contract and its success will require several changes in our habits for specifying, designing, and maintaining control systems. This paper summarizes some key concepts which should be respected in order to obtain maximum benefits from the future contract and to optimize the software activities in the division. The contract concerns the maintenance and development of the monitoring and control systems used for supervising CERN's technical infrastructure (electrical distribution, cooling water, air conditioning, safety, and access control). The systems concerned consist of computer and communication hardware and software, tailored to provide specific functionalities for the remote operation, command, and monitoring of equipment. All these systems use commercially available software and hardware such as SCADA, PLCs and associated drivers, controllers, fieldbuses, and networks. It is intended to cont...

  5. System support software for TSTA [Tritium Systems Test Assembly

    International Nuclear Information System (INIS)

    Claborn, G.W.; Mann, L.W.; Nielson, C.W.

    1987-10-01

    The fact that Tritium Systems Test Assembly (TSTA) is an experimental facility makes it impossible and undesirable to try to forecast the exact software requirements. Thus the software had to be written in a manner that would allow modifications without compromising the safety requirements imposed by the handling of tritium. This suggested a multi-level approach to the software. In this approach (much like the ISO network model) each level is isolated from the level below and above by cleanly defined interfaces. For example, the subsystem support level interfaces with the subsystem hardware through the software support level. Routines in the software support level provide operations like ''OPEN VALVE'' and CLOSE VALVE'' to the subsystem level. This isolates the subsystem level from the actual hardware. This is advantageous because changes can occur in any level without the need for propagating the change to any other level. The TSTA control system consists of the hardware level, the data conversion level, the operator interface level, and the subsystem process level. These levels are described

  6. Using a group decision support system to make investment prioritisation decisions

    OpenAIRE

    Read, Martin; Gear, Tony; Minkes, Leonard; Irving, Ann

    2013-01-01

    This paper is concerned with how decision making groups involved in making investment prioritisation decisions involving funding of technology and science projects may be supported by a group decision support system (GDSS). While interested in decision outcomes, the primary focus of this paper is the role of a group support system as an aid to developing shared understanding within a group. The paper develops the conceptual framework of decision-making, communication and group support, and de...

  7. Development of transportation asset management decision support tools : final report.

    Science.gov (United States)

    2017-08-09

    This study developed a web-based prototype decision support platform to demonstrate the benefits of transportation asset management in monitoring asset performance, supporting asset funding decisions, planning budget tradeoffs, and optimizing resourc...

  8. Clinical Decision Support Tools: The Evolution of a Revolution

    NARCIS (Netherlands)

    Mould, D. R.; D'Haens, G.; Upton, R. N.

    2016-01-01

    Dashboard systems for clinical decision support integrate data from multiple sources. These systems, the newest in a long line of dose calculators and other decision support tools, utilize Bayesian approaches to fully individualize dosing using information gathered through therapeutic drug

  9. Teaching Probability with the Support of the R Statistical Software

    Science.gov (United States)

    dos Santos Ferreira, Robson; Kataoka, Verônica Yumi; Karrer, Monica

    2014-01-01

    The objective of this paper is to discuss aspects of high school students' learning of probability in a context where they are supported by the statistical software R. We report on the application of a teaching experiment, constructed using the perspective of Gal's probabilistic literacy and Papert's constructionism. The results show improvement…

  10. Cross-Language Support Mechanisms Significantly Aid Software Development

    DEFF Research Database (Denmark)

    Pfeiffer, Rolf-Helge; Wasowski, Andrzej

    2012-01-01

    Contemporary software systems combine many artifacts specified in various modeling and programming languages, domainspecific and general purpose as well. Since multi-language systems are so widespread, working on them calls for tools with cross-language support mechanisms such as (1) visualizatio...

  11. A relational approach to support software architecture analysis

    NARCIS (Netherlands)

    Feijs, L.M.G.; Krikhaar, R.L.; van Ommering, R.C.

    1998-01-01

    This paper reports on our experience with a relational approach to support the analysis of existing software architectures. The analysis options provide for visualization and view calculation. The approach has been applied for reverse engineering. It is also possible to check concrete designs

  12. The Effect of Multimedia Writing Support Software on Written Productivity

    Science.gov (United States)

    Racicot, Rose

    2016-01-01

    The purpose of this study was to explore the effects of multimedia writing support software on the quality and quantity of writing productivity and self-perception for students who have mild to moderate developmental delays. Participants in this study included 22 special education students in grades kindergarten through 6. Methodology included a…

  13. Transformation of UML Behavioral Diagrams to Support Software Model Checking

    Directory of Open Access Journals (Sweden)

    Luciana Brasil Rebelo dos Santos

    2014-04-01

    Full Text Available Unified Modeling Language (UML is currently accepted as the standard for modeling (object-oriented software, and its use is increasing in the aerospace industry. Verification and Validation of complex software developed according to UML is not trivial due to complexity of the software itself, and the several different UML models/diagrams that can be used to model behavior and structure of the software. This paper presents an approach to transform up to three different UML behavioral diagrams (sequence, behavioral state machines, and activity into a single Transition System to support Model Checking of software developed in accordance with UML. In our approach, properties are formalized based on use case descriptions. The transformation is done for the NuSMV model checker, but we see the possibility in using other model checkers, such as SPIN. The main contribution of our work is the transformation of a non-formal language (UML to a formal language (language of the NuSMV model checker towards a greater adoption in practice of formal methods in software development.

  14. A Software Environment for an Adaptive Human-Aware Software Agent Supporting Attention-Demanding Tasks

    NARCIS (Netherlands)

    Bosse, T.; Memon, Z.A.; Oorburg, R.; Umair, M.; Treur, J.; de Vos, M.

    2011-01-01

    This paper presents a software environment providing human-aware ambient support for a human performing a task that demands substantial amounts of attention. The agent obtains human attention-awareness in an adaptive manner by use of a dynamical model of human attention, gaze sensoring by an

  15. Computer-Based Decision Support for Railroad Transportation Systems: an Investment Case Study

    Directory of Open Access Journals (Sweden)

    Luminita DUTA

    2009-01-01

    Full Text Available In the last decade the development of the economical and social life increased the complexity of transportation systems. In this context, the role of Decision Support Systems (DSS became more and more important. The paper presents the characteristics, necessity, and usage of DSS in transportation and describes a practical application in the railroad field. To compute the optimal transportation capacity and flow on a certain railroad, specialized decision-support software which is available on the market was used.

  16. Design of decision support interventions for medication prescribing.

    Science.gov (United States)

    Horsky, Jan; Phansalkar, Shobha; Desai, Amrita; Bell, Douglas; Middleton, Blackford

    2013-06-01

    Describe optimal design attributes of clinical decision support (CDS) interventions for medication prescribing, emphasizing perceptual, cognitive and functional characteristics that improve human-computer interaction (HCI) and patient safety. Findings from published reports on success, failures and lessons learned during implementation of CDS systems were reviewed and interpreted with regard to HCI and software usability principles. We then formulated design recommendations for CDS alerts that would reduce unnecessary workflow interruptions and allow clinicians to make informed decisions quickly, accurately and without extraneous cognitive and interactive effort. Excessive alerting that tends to distract clinicians rather than provide effective CDS can be reduced by designing only high severity alerts as interruptive dialog boxes and less severe warnings without explicit response requirement, by curating system knowledge bases to suppress warnings with low clinical utility and by integrating contextual patient data into the decision logic. Recommended design principles include parsimonious and consistent use of color and language, minimalist approach to the layout of information and controls, the use of font attributes to convey hierarchy and visual prominence of important data over supporting information, the inclusion of relevant patient data in the context of the alert and allowing clinicians to respond with one or two clicks. Although HCI and usability principles are well established and robust, CDS and EHR system interfaces rarely conform to the best known design conventions and are seldom conceived and designed well enough to be truly versatile and dependable tools. These relatively novel interventions still require careful monitoring, research and analysis of its track record to mature. Clarity and specificity of alert content and optimal perceptual and cognitive attributes, for example, are essential for providing effective decision support to clinicians

  17. Composable Framework Support for Software-FMEA Through Model Execution

    Science.gov (United States)

    Kocsis, Imre; Patricia, Andras; Brancati, Francesco; Rossi, Francesco

    2016-08-01

    Performing Failure Modes and Effect Analysis (FMEA) during software architecture design is becoming a basic requirement in an increasing number of domains; however, due to the lack of standardized early design phase model execution, classic SW-FMEA approaches carry significant risks and are human effort-intensive even in processes that use Model-Driven Engineering.Recently, modelling languages with standardized executable semantics have emerged. Building on earlier results, this paper describes framework support for generating executable error propagation models from such models during software architecture design. The approach carries the promise of increased precision, decreased risk and more automated execution for SW-FMEA during dependability- critical system development.

  18. Solar Constant (SOLCON) Experiment: Ground Support Equipment (GSE) software development

    Science.gov (United States)

    Gibson, M. Alan; Thomas, Susan; Wilson, Robert

    1991-01-01

    The Solar Constant (SOLCON) Experiment, the objective of which is to determine the solar constant value and its variability, is scheduled for launch as part of the Space Shuttle/Atmospheric Laboratory for Application and Science (ATLAS) spacelab mission. The Ground Support Equipment (GSE) software was developed to monitor and analyze the SOLCON telemetry data during flight and to test the instrument on the ground. The design and development of the GSE software are discussed. The SOLCON instrument was tested during Davos International Solar Intercomparison, 1989 and the SOLCON data collected during the tests are analyzed to study the behavior of the instrument.

  19. Marketing Decision Making and Decision Support: Challenges and Perspectives for Successful Marketing Management Support Systems

    NARCIS (Netherlands)

    G.H. van Bruggen (Gerrit); B. Wierenga (Berend)

    2009-01-01

    textabstractMarketing management support systems (MMSS) are computer-enabled devices that help marketers to make better decisions. Marketing processes can be quite complex, involving large numbers of variables and mostly outcomes are the results of the actions of many different stakeholders (e.g.,

  20. The approaches for the decision support in case natural hazards

    Science.gov (United States)

    Vyazilov, Evgeny; Chunyaev, Nikita

    2013-04-01

    In spite of using highly automated systems of measurement, collecting, storing, handling, prediction and delivery of information on the marine environment, including natural hazards, the amount of damage from natural phenomena increases. Because information on the marine environment delivered to the industrial facilities not effectively used. To such information pays little attention by individual decision-makers and not always perform preventive measures necessary for reduce and prevent damage. Automation of information support will improve the efficiency management of the marine activities. In Russia develops "The Unified system of the information about World ocean" (ESIMO, http://esimo.ru/), that integrates observation, analysis, prognostic and climate data. Necessary to create tools to automatic selection natural disasters through all integrated data; notification decision-makers about arising natural hazards - software agent; provision of information in a compact form for the decision-makers; assessment of possible damage and costs to the preventive measures; providing information on the impacts of environment on economic facilities and recommendations for decision-making; the use of maps, diagrams, tables for reporting. Tools for automatic selection designed for identification of natural phenomena based on the resources ESIMO and corresponding critical values of the indicators environment. The result of this module will be constantly updated database of critical situations of environment for each object or technological process. To operational notify and provide current information about natural hazards proposes using a software agent that is installed on the computer decision-makers, which is activated in case critical situations and provides a minimum of information. In the event of natural disaster software agent should be able to inform decision-makers about this, providing information on the current situation, and the possibility for more and detailed

  1. Semantic technologies in a decision support system

    Science.gov (United States)

    Wasielewska, K.; Ganzha, M.; Paprzycki, M.; Bǎdicǎ, C.; Ivanovic, M.; Lirkov, I.

    2015-10-01

    The aim of our work is to design a decision support system based on ontological representation of domain(s) and semantic technologies. Specifically, we consider the case when Grid / Cloud user describes his/her requirements regarding a "resource" as a class expression from an ontology, while the instances of (the same) ontology represent available resources. The goal is to help the user to find the best option with respect to his/her requirements, while remembering that user's knowledge may be "limited." In this context, we discuss multiple approaches based on semantic data processing, which involve different "forms" of user interaction with the system. Specifically, we consider: (a) ontological matchmaking based on SPARQL queries and class expression, (b) graph-based semantic closeness of instances representing user requirements (constructed from the class expression) and available resources, and (c) multicriterial analysis based on the AHP method, which utilizes expert domain knowledge (also ontologically represented).

  2. THE DECISION SUPPORT SYSTEM IN ROMANIA

    Directory of Open Access Journals (Sweden)

    Ana V.Monica POP

    2013-10-01

    Full Text Available In the present paper we will try to analyze the Decision Support System (DSS and the way in which it is applied or not in the Romanian Small and Medium Sized Enterprises (SMEs (with examples. We also will see if the system is beneficial for these Romanian Enterprises. We analyzed through interviews 50 small and medium-sized Romanian enterprises. They do not accept their name to be published. As a consequence, we will present only the results. It is underlined in the conclusions the differences between the small and the medium size enterprises in respect of the models they are using. The most important benefits of DSS (generally are represented by increased efficiency, competitive advantages and better managerial process.

  3. Coordinating complex decision support activities across distributed applications

    Science.gov (United States)

    Adler, Richard M.

    1994-01-01

    Knowledge-based technologies have been applied successfully to automate planning and scheduling in many problem domains. Automation of decision support can be increased further by integrating task-specific applications with supporting database systems, and by coordinating interactions between such tools to facilitate collaborative activities. Unfortunately, the technical obstacles that must be overcome to achieve this vision of transparent, cooperative problem-solving are daunting. Intelligent decision support tools are typically developed for standalone use, rely on incompatible, task-specific representational models and application programming interfaces (API's), and run on heterogeneous computing platforms. Getting such applications to interact freely calls for platform independent capabilities for distributed communication, as well as tools for mapping information across disparate representations. Symbiotics is developing a layered set of software tools (called NetWorks! for integrating and coordinating heterogeneous distributed applications. he top layer of tools consists of an extensible set of generic, programmable coordination services. Developers access these services via high-level API's to implement the desired interactions between distributed applications.

  4. Software/hardware distributed processing network supporting the Ada environment

    Science.gov (United States)

    Wood, Richard J.; Pryk, Zen

    1993-09-01

    A high-performance, fault-tolerant, distributed network has been developed, tested, and demonstrated. The network is based on the MIPS Computer Systems, Inc. R3000 Risc for processing, VHSIC ASICs for high speed, reliable, inter-node communications and compatible commercial memory and I/O boards. The network is an evolution of the Advanced Onboard Signal Processor (AOSP) architecture. It supports Ada application software with an Ada- implemented operating system. A six-node implementation (capable of expansion up to 256 nodes) of the RISC multiprocessor architecture provides 120 MIPS of scalar throughput, 96 Mbytes of RAM and 24 Mbytes of non-volatile memory. The network provides for all ground processing applications, has merit for space-qualified RISC-based network, and interfaces to advanced Computer Aided Software Engineering (CASE) tools for application software development.

  5. Design and realization of tourism spatial decision support system based on GIS

    Science.gov (United States)

    Ma, Zhangbao; Qi, Qingwen; Xu, Li

    2008-10-01

    In this paper, the existing problems of current tourism management information system are analyzed. GIS, tourism as well as spatial decision support system are introduced, and the application of geographic information system technology and spatial decision support system to tourism management and the establishment of tourism spatial decision support system based on GIS are proposed. System total structure, system hardware and software environment, database design and structure module design of this system are introduced. Finally, realization methods of this systemic core functions are elaborated.

  6. Implementation of workflow engine technology to deliver basic clinical decision support functionality.

    Science.gov (United States)

    Huser, Vojtech; Rasmussen, Luke V; Oberg, Ryan; Starren, Justin B

    2011-04-10

    Workflow engine technology represents a new class of software with the ability to graphically model step-based knowledge. We present application of this novel technology to the domain of clinical decision support. Successful implementation of decision support within an electronic health record (EHR) remains an unsolved research challenge. Previous research efforts were mostly based on healthcare-specific representation standards and execution engines and did not reach wide adoption. We focus on two challenges in decision support systems: the ability to test decision logic on retrospective data prior prospective deployment and the challenge of user-friendly representation of clinical logic. We present our implementation of a workflow engine technology that addresses the two above-described challenges in delivering clinical decision support. Our system is based on a cross-industry standard of XML (extensible markup language) process definition language (XPDL). The core components of the system are a workflow editor for modeling clinical scenarios and a workflow engine for execution of those scenarios. We demonstrate, with an open-source and publicly available workflow suite, that clinical decision support logic can be executed on retrospective data. The same flowchart-based representation can also function in a prospective mode where the system can be integrated with an EHR system and respond to real-time clinical events. We limit the scope of our implementation to decision support content generation (which can be EHR system vendor independent). We do not focus on supporting complex decision support content delivery mechanisms due to lack of standardization of EHR systems in this area. We present results of our evaluation of the flowchart-based graphical notation as well as architectural evaluation of our implementation using an established evaluation framework for clinical decision support architecture. We describe an implementation of a free workflow technology

  7. Implementation of workflow engine technology to deliver basic clinical decision support functionality

    Science.gov (United States)

    2011-01-01

    Background Workflow engine technology represents a new class of software with the ability to graphically model step-based knowledge. We present application of this novel technology to the domain of clinical decision support. Successful implementation of decision support within an electronic health record (EHR) remains an unsolved research challenge. Previous research efforts were mostly based on healthcare-specific representation standards and execution engines and did not reach wide adoption. We focus on two challenges in decision support systems: the ability to test decision logic on retrospective data prior prospective deployment and the challenge of user-friendly representation of clinical logic. Results We present our implementation of a workflow engine technology that addresses the two above-described challenges in delivering clinical decision support. Our system is based on a cross-industry standard of XML (extensible markup language) process definition language (XPDL). The core components of the system are a workflow editor for modeling clinical scenarios and a workflow engine for execution of those scenarios. We demonstrate, with an open-source and publicly available workflow suite, that clinical decision support logic can be executed on retrospective data. The same flowchart-based representation can also function in a prospective mode where the system can be integrated with an EHR system and respond to real-time clinical events. We limit the scope of our implementation to decision support content generation (which can be EHR system vendor independent). We do not focus on supporting complex decision support content delivery mechanisms due to lack of standardization of EHR systems in this area. We present results of our evaluation of the flowchart-based graphical notation as well as architectural evaluation of our implementation using an established evaluation framework for clinical decision support architecture. Conclusions We describe an implementation of

  8. Decision criteria for software component sourcing: steps towards a framework

    NARCIS (Netherlands)

    Kusters, R.J.; Pouwelse, L.; Martin, H.; Trienekens, J.J.M.; Hammoudi, Sl.; Maciaszek, L.; Missikoff, M.M.; Camp, O.; Cordeiro, J.

    2016-01-01

    Software developing organizations nowadays have a wide choice when it comes to sourcing software components. This choice ranges from developing or adapting in-house developed components via buying closed source components to utilizing open source components. This study seeks to determine criteria

  9. Multi-criteria decision analysis methods and software

    CERN Document Server

    Ishizaka, Alessio

    2013-01-01

    This book presents an introduction to MCDA followed by more detailed chapters about each of the leading methods used in this field. Comparison of methods and software is also featured to enable readers to choose the most appropriate method needed in their research. Worked examples as well as the software featured in the book are available on an accompanying website.

  10. Quantitative Decision Support Requires Quantitative User Guidance

    Science.gov (United States)

    Smith, L. A.

    2009-12-01

    Is it conceivable that models run on 2007 computer hardware could provide robust and credible probabilistic information for decision support and user guidance at the ZIP code level for sub-daily meteorological events in 2060? In 2090? Retrospectively, how informative would output from today’s models have proven in 2003? or the 1930’s? Consultancies in the United Kingdom, including the Met Office, are offering services to “future-proof” their customers from climate change. How is a US or European based user or policy maker to determine the extent to which exciting new Bayesian methods are relevant here? or when a commercial supplier is vastly overselling the insights of today’s climate science? How are policy makers and academic economists to make the closely related decisions facing them? How can we communicate deep uncertainty in the future at small length-scales without undermining the firm foundation established by climate science regarding global trends? Three distinct aspects of the communication of the uses of climate model output targeting users and policy makers, as well as other specialist adaptation scientists, are discussed. First, a brief scientific evaluation of the length and time scales at which climate model output is likely to become uninformative is provided, including a note on the applicability the latest Bayesian methodology to current state-of-the-art general circulation models output. Second, a critical evaluation of the language often employed in communication of climate model output, a language which accurately states that models are “better”, have “improved” and now “include” and “simulate” relevant meteorological processed, without clearly identifying where the current information is thought to be uninformative and misleads, both for the current climate and as a function of the state of the (each) climate simulation. And thirdly, a general approach for evaluating the relevance of quantitative climate model output

  11. Virtual Beach: Decision Support Tools for Beach Pathogen Prediction

    Science.gov (United States)

    The Virtual Beach Managers Tool (VB) is decision-making software developed to help local beach managers make decisions as to when beaches should be closed due to predicted high levels of water borne pathogens. The tool is being developed under the umbrella of EPA's Advanced Monit...

  12. Decision support to enable sustainability in development projects

    CSIR Research Space (South Africa)

    Meyer, IA

    2014-10-01

    Full Text Available that are not always explicitly linked to development outcomes. Throughout this process, scope exists to aid decision makers, through a simplistic set of decision models, to make better decisions. The emphasis is on decisions that support long-term value creation...

  13. RODOS: a comprehensive European - integrated decision support system for Romania

    International Nuclear Information System (INIS)

    Mateescu, Gh.; Gheorghiu, Adriana; Gheorghiu, Dorina; Slavnicu, Dan; Craciunescu, Teddy

    1998-01-01

    This work is basically dedicated to RODOS (Real-time On-line DecisiOn support System), a comprehensive (computerized) decision support system ((C)DSS), integrated at European scale, which is in progress to be customized and implemented also for Romania to cope with the off-site response to nuclear emergencies. The first part deals with a short introduction regarding the need for a decision support system especially in case of a nuclear accident; there are also briefly reviewed the criteria one could demand that a CDSS should fulfill and the need for CDSS to give unequivocal answers to all encountered matters. Subsequently, there are mentioned some of the most known DSS in the world for off-site response to nuclear emergencies together with certain recent accomplishment of the IAEA in this field. The next chapter is dedicated to the four basic related projects (ECURIE, EURDEP, OSEP and RODOS) of the European Commission whose purpose consists in the optimisation of the nuclear emergency preparedness and response everywhere in Europe. Further on there are presented the basic features (the overall structure and functions), along with component software subsystems of the RODOS and, then, the background of RODOS implementation in Romania is reviewed (Romanian reasons to adhere to the RODOS project, needs, national legal framework and competent authorities in the nuclear domain, national radiological and meteorological networks. Finally, it is shortly reported the present status of RODOS customization and implementation in Romania (RODOS dedicated technical environment, collection of data and their transfer into RoGIS database, real-time on-line connection to networks, collection of data for countermeasure modules, source term assessment for CANDU-reactor, other related achievements) together with some concluding remarks. (authors)

  14. [Development of integrated support software for clinical nutrition].

    Science.gov (United States)

    Siquier Homar, Pedro; Pinteño Blanco, Manel; Calleja Hernández, Miguel Ángel; Fernández Cortés, Francisco; Martínez Sotelo, Jesús

    2015-09-01

    to develop an integrated computer software application for specialized nutritional support, integrated in the electronic clinical record, which detects automatically and early those undernourished patients or at risk of developing undernourishment, determining points of opportunity for improvement and evaluation of the results. the quality standards published by the Nutrition Work Group of the Spanish Society of Hospital Pharmacy (SEFH) and the recommendations by the Pharmacy Group of the Spanish Society of Parenteral and Enteral Nutrition (SENPE) have been taken into account. According to these quality standards, the nutritional support has to include the following healthcare stages or sub-processes: nutritional screening, nutritional assessment, plan for nutritional care, prescription, preparation and administration. this software allows to conduct, in an automated way, a specific nutritional assessment for those patients with nutritional risk, implementing, if necessary, a nutritional treatment plan, conducting follow-up and traceability of outcomes derived from the implementation of improvement actions, and quantifying to what extent our practice is close to the established standard. this software allows to standardize the specialized nutritional support from a multidisciplinary point of view, introducing the concept of quality control per processes, and including patient as the main customer. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

  15. Development of integrated support software for clinical nutrition

    Directory of Open Access Journals (Sweden)

    Pedro Siquier Homar

    2015-09-01

    Full Text Available Objectives: to develop an integrated computer software application for specialized nutritional support, integrated in the electronic clinical record, which detects automatically and early those undernourished patients or at risk of developing undernourishment, determining points of opportunity for improvement and evaluation of the results. Methods: the quality standards published by the Nutrition Work Group of the Spanish Society of Hospital Pharmacy (SEFH and the recommendations by the Pharmacy Group of the Spanish Society of Parenteral and Enteral Nutrition (SENPE have been taken into account. According to these quality standards, the nutritional support has to include the following healthcare stages or sub-processes: nutritional screening, nutritional assessment, plan for nutritional care, prescription, preparation and administration. Results: this software allows to conduct, in an automated way, a specific nutritional assessment for those patients with nutritional risk, implementing, if necessary, a nutritional treatment plan, conducting follow-up and traceability of outcomes derived from the implementation of improvement actions, and quantifying to what extent our practice is close to the established standard. Conclusions: this software allows to standardize the specialized nutritional support from a multidisciplinary point of view, introducing the concept of quality control per processes, and including patient as the main customer

  16. Software and mathematical support of Kazakhstani star tracker

    Science.gov (United States)

    Akhmedov, D.; Yelubayev, S.; Ten, V.; Bopeyev, T.; Alipbayev, K.; Sukhenko, A.

    2016-10-01

    Currently the specialists of Kazakhstan have been developing the star tracker that is further planned to use on Kazakhstani satellites of various purposes. At the first stage it has been developed the experimental model of star tracker that has following characteristics: field of view 20°, update frequency 2 Hz, exclusion angle 40°, accuracy of attitude determination of optical axis/around optical axis 15/50 arcsec. Software and mathematical support are the most high technology parts of star tracker. The results of software and mathematical support development of experimental model of Kazakhstani star tracker are represented in this article. In particular, there are described the main mathematical models and algorithms that have been used as a basis for program units of preliminary image processing of starry sky, stars identification and star tracker attitude determination. The results of software and mathematical support testing with the help of program simulation complex using various configurations of defects including image sensor noises, point spread function modeling, optical system distortion up to 2% are presented. Analysis of testing results has shown that accuracy of attitude determination of star tracker is within the permissible range

  17. Multilevel Flow Modeling Based Decision Support System and Its Task Organization

    DEFF Research Database (Denmark)

    Zhang, Xinxin; Lind, Morten; Ravn, Ole

    2013-01-01

    For complex engineering systems, there is an increasing demand for safety and reliability. Decision support system (DSS) is designed to offer su-pervision and analysis about operational situations. A proper model representa-tion is required for DSS to understand the process knowledge. Multilevel ...... techniques of MFM reasoning and less mature yet relevant MFM concepts are considered. It also offers an architecture design of task organization for MFM software tools by using the concept of agent and technology of multiagent software system....

  18. Design of multilevel flow modelling-based decision support system by using multiagent platform

    DEFF Research Database (Denmark)

    Zhang, Xinxin; Lind, Morten; Ravn, Ole

    2015-01-01

    For complex engineering systems, there is an increasing demand forsafety and reliability. Decision support system (DSS) is designed to offersupervision and analysis about operational situations. A proper modelrepresentation is required for DSS to understand the process knowledge.Multilevel flow...... available techniques of MFM reasoning and less matureyet relevant MFM concepts are considered. It also offers an architecture designof task organisation for MFM software tools by using the concept of agent andtechnology of multiagent software system...

  19. Decision Support for Environmental Management of Industrial ...

    Science.gov (United States)

    Non-hazardous solid materials from industrial processes, once regarded as waste and disposed in landfills, offer numerous environmental and economic advantages when put to beneficial uses (BUs). Proper management of these industrial non-hazardous secondary materials (INSM) requires estimates of their probable environmental impacts among disposal as well as BU options. The U.S. Environmental Protection Agency (EPA) has recently approved new analytical methods (EPA Methods 1313–1316) to assess leachability of constituents of potential concern in these materials. These new methods are more realistic for many disposal and BU options than historical methods, such as the toxicity characteristic leaching protocol. Experimental data from these new methods are used to parameterize a chemical fate and transport (F&T) model to simulate long-term environmental releases from flue gas desulfurization gypsum (FGDG) when disposed of in an industrial landfill or beneficially used as an agricultural soil amendment. The F&T model is also coupled with optimization algorithms, the Beneficial Use Decision Support System (BUDSS), under development by EPA to enhance INSM management. The objective of this paper is to demonstrate the methodologies and encourage similar applications to improve environmental management and BUs of INSM through F&T simulation coupled with optimization, using realistic model parameterization.

  20. Global Turbulence Decision Support for Aviation

    Science.gov (United States)

    Williams, J.; Sharman, R.; Kessinger, C.; Feltz, W.; Wimmers, A.

    2009-09-01

    Turbulence is widely recognized as the leading cause of injuries to flight attendants and passengers on commercial air carriers, yet legacy decision support products such as SIGMETs and SIGWX charts provide relatively low spatial- and temporal-resolution assessments and forecasts of turbulence, with limited usefulness for strategic planning and tactical turbulence avoidance. A new effort is underway to develop an automated, rapid-update, gridded global turbulence diagnosis and forecast system that addresses upper-level clear-air turbulence, mountain-wave turbulence, and convectively-induced turbulence. This NASA-funded effort, modeled on the U.S. Federal Aviation Administration's Graphical Turbulence Guidance (GTG) and GTG Nowcast systems, employs NCEP Global Forecast System (GFS) model output and data from NASA and operational satellites to produce quantitative turbulence nowcasts and forecasts. A convective nowcast element based on GFS forecasts and satellite data provides a basis for diagnosing convective turbulence. An operational prototype "Global GTG” system has been running in real-time at the U.S. National Center for Atmospheric Research since the spring of 2009. Initial verification based on data from TRMM, Cloudsat and MODIS (for the convection nowcasting) and AIREPs and AMDAR data (for turbulence) are presented. This product aims to provide the "single authoritative source” for global turbulence information for the U.S. Next Generation Air Transportation System.

  1. Decision support tools for advanced energy management

    International Nuclear Information System (INIS)

    Marik, Karel; Schindler, Zdenek; Stluka, Petr

    2008-01-01

    Rising fuel costs boost energy prices, which is a driving force for improving efficiency of operation of any energy generation facility. This paper focuses on enhancing the operation of distributed integrated energy systems (IES), system that bring together all forms of cooling, heating and power (CCHP) technologies. Described methodology can be applied in power generation and district heating companies, as well as in small-scale systems that supply multiple types of utilities to consumers in industrial, commercial, residential and governmental spheres. Dispatching of such system in an optimal way needs to assess large number of production and purchasing schemes in conditions of continually changing market and variable utility demands influenced by many external factors, very often by weather conditions. The paper describes a combination of forecasting and optimization methods that supports effective decisions in IES system management. The forecaster generates the future most probable utility demand several hours or days ahead, derived from the past energy consumer behaviour. The optimizer generates economically most efficient operating schedule for the IES system that matches these forecasted energy demands and respects expected purchased energy prices. (author)

  2. Post Disaster Assessment with Decision Support System

    Directory of Open Access Journals (Sweden)

    May Florence J. Franco

    2016-05-01

    Full Text Available The study aimed to develop an online system that would expedite the response of agencies after disaster strikes; generate a list of the kinds and volume of relief aids needed per family affected for a fair, precise and timely distribution; implement community-based ICT by remotely gathering all the necessary data needed for disaster assessment; and adhere to ISO 9126 standards. The system was designed to calculate the effects of disaster in human lives and economy. Integrated into the system were Goggle Maps, Mines and GeoSciences Bureau Hazard Maps, SMS sending features, best passable routes calculations, and decision support on the needs that has to be addressed. The system was made live at pdrrmcguimaras.herokuapp.com to allow remote data entry. The functionality and usability of the system were evaluated by 19 potential users by computing for the arithmetic Mean and Standard Deviation of the survey. The result showed that most of them strongly agreed that the system is acceptable based on these criteria. A group of IT experts also evaluated the system’s conformance to ISO 9126 standards using the same method. The result showed that majority of them strongly agreed that the system conforms to this international standard. The system is seen as a valuable tool for the Provincial Disaster Risk Reduction Management Council (PDRRMC and the National Disaster Risk Reduction Management Council (NDRRMC for it could help expedite the assessment of the effects of disasters and the formulation of response plans and strategies.

  3. Software support for environmental measurement in quality at educational institutions

    Directory of Open Access Journals (Sweden)

    Alena Pauliková

    2016-03-01

    Full Text Available The analysed theme of this article is based on the training of environmental measurements for workplaces. This is very important for sustainable quality in technical educational institutions. Applied kinds of software, which are taught at technical educational institutions, have to offer the professional and methodical knowledge concerning conditions of working ambient for students of selected technical specialisations. This skill is performed in such a way that the graduates, after entering the practical professional life, will be able to participate in solutions for actual problems that are related to environmental protection by means of software support. Nowadays, during the training processit is also obligatory to introduce technical science. Taking into consideration the above-mentioned facts it is possible to say that information technology support for environmental study subjects is a relevant aspect, which should be integrated into the university educational process. There is an effective progress that further highlights the focus on the quality of university education not only for environmental engineers. Actual trends require an increasing number of software/hardware educated engineers who can participate in qualitative university preparation, i.e.IT environmentalists. The Department of Environmental Engineering at the Faculty of Mechanical Engineering, TechnicalUniversity in Košice, Slovakia is an institution specified and intended for quality objectivisation. This institution introduced into the study programmes (“Environmental Management” and “Technology of Environmental Protection” study subjects with the software support, which are oriented towards outdoor and indoor ambient and in this way the Department of Process and Environmental Engineering is integrated effectively and intensively into the area of measurement training with regard to the requirement of quality educational processes.

  4. A Methodology for Decision Support for Implementation of Cloud Computing IT Services

    Directory of Open Access Journals (Sweden)

    Adela Tušanová

    2014-07-01

    Full Text Available The paper deals with the decision of small and medium-sized software companies in transition to SaaS model. The goal of the research is to design a comprehensive methodic to support decision making based on actual data of the company itself. Based on a careful analysis, taxonomy of costs, revenue streams and decision-making criteria are proposed in the paper. On the basis of multi-criteria decision-making methods, each alternative is evaluated and the alternative with the highest score is identified as the most appropriate. The proposed methodic is implemented as a web application and verified through  case studies.

  5. A generic accounting model to support operations management decisions

    NARCIS (Netherlands)

    Verdaasdonk, P.J.A.; Wouters, M.J.F.

    2001-01-01

    Information systems are generally unable to generate information about the financial consequences of operations management decisions. This is because the procedures for determining the relevant accounting information for decision support are not formalised in ways that can be implemented in

  6. On Decision Support for Sustainability and Resilience of Infrastructure

    DEFF Research Database (Denmark)

    Nielsen, Michael Havbro Faber; Qin, J.; Miragliaa, S.

    2017-01-01

    in Bayesian decision analysis and probabilistic systems performance modelling. A principal example for decision support at regulatory level is presented for a coupled system comprised of infrastructure, social, hazard and environmental subsystems. The infrastructure systems is modelled as multi...

  7. Healthcare performance turned into decision support.

    Science.gov (United States)

    Sørup, Christian Michel; Jacobsen, Peter

    2013-01-01

    The purpose of this study is to first create an overview of relevant factors directly influencing employee absence in the healthcare sector. The overview is used to further investigate the factors identified using employee satisfaction survey scores exclusively. The result of the overall objective is a management framework that allows managers to gain insight into the current status of risk factors with high influence on employee absence levels. The research consists of a quantitative literature study supported by formal and semi-formal interviews conducted at the case organisations. Employee satisfaction surveys were applied to analyse the development over time of selected factors correlated with concurrent employee absence rates. Checking for causal results, comparisons with the included published literature findings were also carried out. Four major clustered factors, three of which constitute the term "social capital", showed a high degree of connection with employee absence rates. The factors are general satisfaction, fairness, reliance and co-operation. Integrating the four elements in a management framework will provide valuable and holistic information about the determinants with regard to current levels of employee absence. The framework will be a valuable support for leaders with the authority to alter the determinants of employee absence. Since a great part of the empirical material is supplied from the healthcare sector, the results obtained could be restricted to this sector. Inclusion of data from Arbejdsmarkedets Tillaegspension (ATP) showed no deviation from the results in the healthcare sector. The product of the study is a decision support tool for leaders to cope with levels of employee absence. The framework is holistic and can prove to be a valuable tool to take a bearing of where to focus future initiatives. Gathering former observational studies in a complete overview embracing many relevant factors that influence sickness absence has not yet

  8. Developing a Support Tool for Global Product Development Decisions

    DEFF Research Database (Denmark)

    Søndergaard, Erik Stefan; Ahmed-Kristensen, Saeema

    2016-01-01

    This paper investigates how global product development decisions are made through a multiple-case study in three Danish engineering. The paper identifies which information and methods are applied for making decisions and how decision-making can be supported based on previous experience. The paper...... presents results from 51 decisions made in the three companies, and based on the results of the studies a framework for a decision-support tool is outlined and discussed. The paper rounds off with an identification of future research opportunities in the area of global product development and decision-making....

  9. Developing an Interactive Data Visualization Tool to Assess the Impact of Decision Support on Clinical Operations.

    Science.gov (United States)

    Huber, Timothy C; Krishnaraj, Arun; Monaghan, Dayna; Gaskin, Cree M

    2018-05-18

    Due to mandates from recent legislation, clinical decision support (CDS) software is being adopted by radiology practices across the country. This software provides imaging study decision support for referring providers at the point of order entry. CDS systems produce a large volume of data, providing opportunities for research and quality improvement. In order to better visualize and analyze trends in this data, an interactive data visualization dashboard was created using a commercially available data visualization platform. Following the integration of a commercially available clinical decision support product into the electronic health record, a dashboard was created using a commercially available data visualization platform (Tableau, Seattle, WA). Data generated by the CDS were exported from the data warehouse, where they were stored, into the platform. This allowed for real-time visualization of the data generated by the decision support software. The creation of the dashboard allowed the output from the CDS platform to be more easily analyzed and facilitated hypothesis generation. Integrating data visualization tools into clinical decision support tools allows for easier data analysis and can streamline research and quality improvement efforts.

  10. An integrated infrastructure in support of software development

    International Nuclear Information System (INIS)

    Antonelli, S; Bencivenni, M; De Girolamo, D; Giacomini, F; Longo, S; Manzali, M; Veraldi, R; Zani, S

    2014-01-01

    This paper describes the design and the current state of implementation of an infrastructure made available to software developers within the Italian National Institute for Nuclear Physics (INFN) to support and facilitate their daily activity. The infrastructure integrates several tools, each providing a well-identified function: project management, version control system, continuous integration, dynamic provisioning of virtual machines, efficiency improvement, knowledge base. When applicable, access to the services is based on the INFN-wide Authentication and Authorization Infrastructure. The system is being installed and progressively made available to INFN users belonging to tens of sites and laboratories and will represent a solid foundation for the software development efforts of the many experiments and projects that see the involvement of the Institute. The infrastructure will be beneficial especially for small- and medium-size collaborations, which often cannot afford the resources, in particular in terms of know-how, needed to set up such services.

  11. Automation of information decision support to improve e-learning resources quality

    Directory of Open Access Journals (Sweden)

    A.L. Danchenko

    2013-06-01

    Full Text Available Purpose. In conditions of active development of e-learning the high quality of e-learning resources is very important. Providing the high quality of e-learning resources in situation with mass higher education and rapid obsolescence of information requires the automation of information decision support for improving the quality of e-learning resources by development of decision support system. Methodology. The problem is solved by methods of artificial intelligence. The knowledge base of information structure of decision support system that is based on frame model of knowledge representation and inference production rules are developed. Findings. According to the results of the analysis of life cycle processes and requirements to the e-learning resources quality the information model of the structure of the knowledge base of the decision support system, the inference rules for the automatically generating of recommendations and the software implementation are developed. Practical value. It is established that the basic requirements for quality are performance, validity, reliability and manufacturability. It is shown that the using of a software implementation of decision support system for researched courses gives a growth of the quality according to the complex quality criteria. The information structure of a knowledge base system to support decision-making and rules of inference can be used by methodologists and content developers of learning systems.

  12. Development of the Supported Decision Making Inventory System.

    Science.gov (United States)

    Shogren, Karrie A; Wehmeyer, Michael L; Uyanik, Hatice; Heidrich, Megan

    2017-12-01

    Supported decision making has received increased attention as an alternative to guardianship and a means to enable people with intellectual and developmental disabilities to exercise their right to legal capacity. Assessments are needed that can used by people with disabilities and their systems of supports to identify and plan for needed supports to enable decision making. This article describes the steps taken to develop such an assessment tool, the Supported Decision Making Inventory System (SDMIS), and initial feedback received from self-advocates with intellectual disability. The three sections of the SDMIS (Supported Decision Making Personal Factors Inventory, Supported Decision Making Environmental Demands Inventory, and Decision Making Autonomy Inventory) are described and implications for future research, policy, and practice are discussed.

  13. An online infertility clinical decision support system

    Directory of Open Access Journals (Sweden)

    Fabio Diniz de Souza

    2017-01-01

    Full Text Available Objective: To explore some possibilities of computer applications in medicine, and to discuss an online infertility clinical decision support system.Methods: Retrospective data were obtained from 52 couples, and then entered into the online tool. Both its results and the initial diagnoses obtained by the treating physicians were compared with the final diagnoses established by laparoscopy and other diagnostic tests (semen analysis, hormone analysis, endometrial biopsy, ultrasound and hysteroscopy. The initial hypothesis of the research was that the online tool's output was statistically associated with the final diagnoses. In order to verify that hypothesis, a chi-square (χ2 test with Yates' correction for continuity (P<0.05 was performed to verify if the online tool's and the doctor's diagnoses were statistically associated with the final diagnoses.Results: Four etiological factors were present in more than 50% of the couples (ovarian, tubal-peritoneal, uterine, and endometriosis. The statistical results confirmed the research hypothesis for eight out of the nine etiological factors (ovarian, tubal-peritoneal, uterine, cervical, male, vaginal, psychosomatic, and endometriosis; P<0.05. Since there were no cases related to the immune factor in the sample, further clinical data are necessary in order to assess the online tool's performance for that factor.Conclusions: The online tool tends to present more false-positives than false-negatives, whereas the expert physician tends to present more false-negatives than false-positives. Therefore, the online tool and the doctor seem to complement each other. Finally, the obtained results suggest that the infertility online tool discussed herein might be a useful research and instructional tool.

  14. An online infertility clinical decision support system

    Directory of Open Access Journals (Sweden)

    Fabio Diniz de Souza

    2017-09-01

    Full Text Available Objective: To explore some possibilities of computer applications in medicine, and to discuss an online infertility clinical decision support system. Methods: Retrospective data were obtained from 52 couples, and then entered into the online tool. Both its results and the initial diagnoses obtained by the treating physicians were compared with the final diagnoses established by laparoscopy and other diagnostic tests (semen analysis, hormone analysis, endometrial biopsy, ultrasound and hysteroscopy. The initial hypothesis of the research was that the online tool’s output was statistically associated with the final diagnoses. In order to verify that hypothesis, a chi-square (氈2 test with Yates’ correction for continuity (P<0.05 was performed to verify if the online tool’s and the doctor’s diagnoses were statistically associated with the final diagnoses. Results: Four etiological factors were present in more than 50% of the couples (ovarian, tubal-peritoneal, uterine, and endometriosis. The statistical results confirmed the research hypothesis for eight out of the nine etiological factors (ovarian, tubal-peritoneal, uterine, cervical, male, vaginal, psychosomatic, and endometriosis; P<0.05. Since there were no cases related to the immune factor in the sample, further clinical data are necessary in order to assess the online tool’s performance for that factor. Conclusions: The online tool tends to present more false-positives than false negatives, whereas the expert physician tends to present more false-negatives than false-positives. Therefore, the online tool and the doctor seem to complement each other. Finally, the obtained results suggest that the infertility online tool discussed herein might be a useful research and instructional tool.

  15. Software Tools to Support the Assessment of System Health

    Science.gov (United States)

    Melcher, Kevin J.

    2013-01-01

    This presentation provides an overview of three software tools that were developed by the NASA Glenn Research Center to support the assessment of system health: the Propulsion Diagnostic Method Evaluation Strategy (ProDIMES), the Systematic Sensor Selection Strategy (S4), and the Extended Testability Analysis (ETA) tool. Originally developed to support specific NASA projects in aeronautics and space, these software tools are currently available to U.S. citizens through the NASA Glenn Software Catalog. The ProDiMES software tool was developed to support a uniform comparison of propulsion gas path diagnostic methods. Methods published in the open literature are typically applied to dissimilar platforms with different levels of complexity. They often address different diagnostic problems and use inconsistent metrics for evaluating performance. As a result, it is difficult to perform a one ]to ]one comparison of the various diagnostic methods. ProDIMES solves this problem by serving as a theme problem to aid in propulsion gas path diagnostic technology development and evaluation. The overall goal is to provide a tool that will serve as an industry standard, and will truly facilitate the development and evaluation of significant Engine Health Management (EHM) capabilities. ProDiMES has been developed under a collaborative project of The Technical Cooperation Program (TTCP) based on feedback provided by individuals within the aircraft engine health management community. The S4 software tool provides a framework that supports the optimal selection of sensors for health management assessments. S4 is structured to accommodate user ]defined applications, diagnostic systems, search techniques, and system requirements/constraints. One or more sensor suites that maximize this performance while meeting other user ]defined system requirements that are presumed to exist. S4 provides a systematic approach for evaluating combinations of sensors to determine the set or sets of

  16. Evaluation of Farm Accounting Software. Improved Decision Making.

    Science.gov (United States)

    Lovell, Ashley C., Comp.

    This guide contains information on 36 computer programs used for farm and ranch accounting. This information and assessment of software features were provided by the manufacturers and vendors. Information is provided on the following items, among others: program name, vendor's name and address, computer and operating system, type of accounting and…

  17. WAR DSS: A DECISION SUPPORT SYSTEM FOR ENVIRONMENTALLY CONSCIOUS CHEMICAL PROCESS DESIGN

    Science.gov (United States)

    The second generation of the Waste Reduction (WAR) Algorithm is constructed as a decision support system (DSS) in the design of chemical manufacturing facilities. The WAR DSS is a software tool that can help reduce the potential environmental impacts (PEIs) of industrial chemical...

  18. Study of arcview GIS application in the nuclear power plant emergency response decision support system

    International Nuclear Information System (INIS)

    Li Peng; Chen Lin; Dong Binjiang

    2003-01-01

    It is very significant to apply the technique of GIS to the development of the Nuclear Power Plant Emergency Response Decision Support System. On the basis of the software system ArcView. This paper investigate the framework, the function and the development methods of the system. (authors)

  19. Environmental decision support system on base of geoinformational technologies for the analysis of nuclear accident consequences

    International Nuclear Information System (INIS)

    Haas, T.C.; Maigan, M.; Arutyunyan, R.V.; Bolshov, L.A.; Demianov, V.V.

    1996-01-01

    The report deals with description of the concept and prototype of environmental decision support system (EDSS) for the analysis of late off-site consequences of severe nuclear accidents and analysis, processing and presentation of spatially distributed radioecological data. General description of the available software, use of modem achievements of geostatistics and stochastic simulations for the analysis of spatial data are presented and discussed

  20. Prototype of a web - based participative decision support platform in natural hazards and risk management

    NARCIS (Netherlands)

    Aye, Z.C.; Jaboyedoff, M.; Derron, M.H.; van Westen, C.J.

    2015-01-01

    This paper presents the current state and development of a prototype web-GIS (Geographic Information System) decision support platform intended for application in natural hazards and risk management, mainly for floods and landslides. This web platform uses open-source geospatial software and

  1. Computer Decision Support to Improve Autism Screening and Care in Community Pediatric Clinics

    Science.gov (United States)

    Bauer, Nerissa S.; Sturm, Lynne A.; Carroll, Aaron E.; Downs, Stephen M.

    2013-01-01

    An autism module was added to an existing computer decision support system (CDSS) to facilitate adherence to recommended guidelines for screening for autism spectrum disorders in primary care pediatric clinics. User satisfaction was assessed by survey and informal feedback at monthly meetings between clinical staff and the software team. To assess…

  2. Fault Detection for Shipboard Monitoring and Decision Support Systems

    DEFF Research Database (Denmark)

    Lajic, Zoran; Nielsen, Ulrik Dam

    2009-01-01

    In this paper a basic idea of a fault-tolerant monitoring and decision support system will be explained. Fault detection is an important part of the fault-tolerant design for in-service monitoring and decision support systems for ships. In the paper, a virtual example of fault detection...... will be presented for a containership with a real decision support system onboard. All possible faults can be simulated and detected using residuals and the generalized likelihood ratio (GLR) algorithm....

  3. Checklist and Decision Support in Nutritional Care for Burned Patients

    Science.gov (United States)

    2016-10-01

    able to construct a checklist of a clinical and physiologic model and then a computerised decision support system that will perform two functions: the...the provision of nutritional therapy, and assessment of use by nursing and physician staff KEYWORDS Nutrition, severe burn, decision support... clinical testing. Checklist and Decision Support in Nutritional Care for Burned Patients Proposal Number: 12340011 W81XWH-12-2-0074 PI: Steven E

  4. Decision making model design for antivirus software selection using Factor Analysis and Analytical Hierarchy Process

    OpenAIRE

    Nurhayati Ai; Gautama Aditya; Naseer Muchammad

    2018-01-01

    Virus spread increase significantly through the internet in 2017. One of the protection method is using antivirus software. The wide variety of antivirus software in the market tends to creating confusion among consumer. Selecting the right antivirus according to their needs has become difficult. This is the reason we conduct our research. We formulate a decision making model for antivirus software consumer. The model is constructed by using factor analysis and AHP method. First we spread que...

  5. The Use of Advanced Warfighting Experiments to Support Acquisition Decisions

    National Research Council Canada - National Science Library

    Strayer, Kenneth

    1999-01-01

    .... Specifically, the thesis evaluated the effectiveness of the Army Task Force XXI AWE in providing information to support investment decisions and refinement of requirements for information age technologies...

  6. ARCHITECTURE SOFTWARE SOLUTION TO SUPPORT AND DOCUMENT MANAGEMENT QUALITY SYSTEM

    Directory of Open Access Journals (Sweden)

    Milan Eric

    2010-12-01

    Full Text Available One of the basis of a series of standards JUS ISO 9000 is quality system documentation. An architecture of the quality system documentation depends on the complexity of business system. An establishment of an efficient management documentation of system of quality is of a great importance for the business system, as well as in the phase of introducing the quality system and in further stages of its improvement. The study describes the architecture and capability of software solutions to support and manage the quality system documentation in accordance with the requirements of standards ISO 9001:2001, ISO 14001:2005 HACCP etc.

  7. Hardware support for software controlled fast reconfiguration of performance counters

    Science.gov (United States)

    Salapura, Valentina; Wisniewski, Robert W.

    2013-06-18

    Hardware support for software controlled reconfiguration of performance counters may include a plurality of performance counters collecting one or more counts of one or more selected activities. A storage element stores data value representing a time interval, and a timer element reads the data value and detects expiration of the time interval based on the data value and generates a signal. A plurality of configuration registers stores a set of performance counter configurations. A state machine receives the signal and selects a configuration register from the plurality of configuration registers for reconfiguring the one or more performance counters.

  8. Modeling Based Decision Support Environment, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — Phoenix Integration's vision is the creation of an intuitive human-in-the-loop engineering environment called Decision Navigator that leverages recent advances in...

  9. A Review of Automated Decision Support System

    African Journals Online (AJOL)

    pc

    2018-03-05

    Mar 5, 2018 ... Intelligence AI that enable decision automation based on existing facts, knowledge ... The growing reliance on data impacts dynamic data extraction and retrieval of the ... entertainment, medical, and the web. III. DECISION ...

  10. A systematic review of decision support needs of parents making child health decisions

    Science.gov (United States)

    Jackson, Cath; Cheater, Francine M.; Reid, Innes

    2008-01-01

    Abstract Objective  To identify the decision support needs of parents attempting to make an informed health decision on behalf of a child. Context  The first step towards implementing patient decision support is to assess patients’ information and decision‐making needs. Search strategy  A systematic search of key bibliographic databases for decision support studies was performed in 2005. Reference lists of relevant review articles and key authors were searched. Three relevant journals were hand searched. Inclusion criteria  Non‐intervention studies containing data on decision support needs of parents making child health decisions. Data extraction and synthesis  Data were extracted on study characteristics, decision focus and decision support needs. Studies were quality assessed using a pre‐defined set of criteria. Data synthesis used the UK Evidence for Policy and Practice Information and Co‐ordinating Centre approach. Main results  One‐hundred and forty nine studies were included across various child health decisions, settings and study designs. Thematic analysis of decision support needs indicated three key issues: (i) information (including suggestions about the content, delivery, source, timing); (ii) talking to others (including concerns about pressure from others); and (iii) feeling a sense of control over the process that could be influenced by emotionally charged decisions, the consultation process, and structural or service barriers. These were consistent across decision type, study design and whether or not the study focused on informed decision making. PMID:18816320

  11. Software Support for the Classical, Contemporary and Future Project Management

    Directory of Open Access Journals (Sweden)

    Jakov Crnkovic

    2006-04-01

    Full Text Available The volume and complexity of Project Management (PM raises many questions for managers. What exactly are we managing? People? Performance? Efficiency? Effectiveness? Cost? Time? At what levels do projects become challenging and worthy of significant management attention? Can some projects be left on auto-pilot? Must others be managed more aggressively? What metrics are useful in Project Management? How can they be integrated with normal performance metrics in the organization? How can metrics be built into assessment programs that work? How can projects be monitored, re-planned to stay within the original budget and schedule deadlines? How good is the PM software support? Do we really need PM software packages or it should be the integral part of the company's information system (IS? Where is the knowledge about company's previous projects and performance? Are we able to establish company or even industry wide standards for project management? Can we (or should we move from the PMBOK® guidelines and use other approaches? We discussing important questions in PM: software products, responsibilities for concurrently executing several projects (multi-projects with multi objectives and multiple deadlines, introducing a need for initiation, design, execution, and control using a virtual project management and application of the organizational project maturity model.

  12. Agile software assessment

    OpenAIRE

    Nierstrasz Oscar; Lungu Mircea

    2012-01-01

    Informed decision making is a critical activity in software development but it is poorly supported by common development environments which focus mainly on low level programming tasks. We posit the need for agile software assessment which aims to support decision making by enabling rapid and effective construction of software models and custom analyses. Agile software assessment entails gathering and exploiting the broader context of software information related to the system at hand as well ...

  13. A Benchmark Usability Study of the Tactical Decision Making Under Stress Decision Support System

    National Research Council Canada - National Science Library

    Schmorrow, Dylan

    1998-01-01

    This study evaluates the usability of a U.S. Navy Decision Support System (DSS). The DSS was developed to enhance the performance of tactical decision makers within a Navy Combat Information Center...

  14. Development of a decision making software for radiation protection in terrorism

    International Nuclear Information System (INIS)

    Suman, Vitisha; Datta, D.

    2008-01-01

    The primary aim of radiological emergency preparedness is to mitigate the consequences of the accident by reducing the radiation exposure in case of any terrorist attack. However, the selection of the effective countermeasure is fuzzy due to the vagueness of the model input variables. Decision making during emergency due to RDD explosion in the public domain is approached by Fuzzy logic. Software for decision making of the scenarios of RDD explosions has been developed. Inference engine of this software is based on the activation of the fuzzy rules. A case study is presented in the paper to show the applicability of the software. (author)

  15. Making interactive decision support for patients a reality.

    NARCIS (Netherlands)

    Evans, R.W.; Elwyn, G.; Edwards, A.

    2004-01-01

    Interactive decision support applications might help patients to make difficult decisions about their health care. They lie in the context of traditional decision aids, which are known to have effects on a number of patient outcomes, including knowledge and decisional conflict. The problem of

  16. A Multi-criterial Decision Support System for Forest Management

    Science.gov (United States)

    Donald Nute; Geneho Kim; Walter D. Potter; Mark J. Twery; H. Michael Rauscher; Scott Thomasma; Deborah Bennett; Peter Kollasch

    1999-01-01

    We describe a research project that has as its goal development of a full-featured decision support system for managing forested land to satisfy multiple criteria represented as timber, wildlife, water, ecological, and wildlife objectives. The decision process proposed for what was originally conceived of as a Northeast Decision Model (NED) includes data acquisition,...

  17. A multicriteria decision support methodology for evaluating airport expansion plans

    NARCIS (Netherlands)

    Vreeker, R.; Nijkamp, P.; ter Welle, C.

    2001-01-01

    Rational decision-making requires an assessment of advantages and disadvantages of choice possibilities, including non-market effects (such as externalities). This also applies to strategic decision-making in the transport sector (including aviation). In the past decades various decision support and

  18. A conceptual evolutionary aseismic decision support framework for hospitals

    Science.gov (United States)

    Hu, Yufeng; Dargush, Gary F.; Shao, Xiaoyun

    2012-12-01

    In this paper, aconceptual evolutionary framework for aseismic decision support for hospitalsthat attempts to integrate a range of engineering and sociotechnical models is presented. Genetic algorithms are applied to find the optimal decision sets. A case study is completed to demonstrate how the frameworkmay applytoa specific hospital.The simulations show that the proposed evolutionary decision support framework is able to discover robust policy sets in either uncertain or fixed environments. The framework also qualitatively identifies some of the characteristicbehavior of the critical care organization. Thus, by utilizing the proposedframework, the decision makers are able to make more informed decisions, especially toenhance the seismic safety of the hospitals.

  19. A requirements specification for a software design support system

    Science.gov (United States)

    Noonan, Robert E.

    1988-01-01

    Most existing software design systems (SDSS) support the use of only a single design methodology. A good SDSS should support a wide variety of design methods and languages including structured design, object-oriented design, and finite state machines. It might seem that a multiparadigm SDSS would be expensive in both time and money to construct. However, it is proposed that instead an extensible SDSS that directly implements only minimal database and graphical facilities be constructed. In particular, it should not directly implement tools to faciliate language definition and analysis. It is believed that such a system could be rapidly developed and put into limited production use, with the experience gained used to refine and evolve the systems over time.

  20. Spaceport Command and Control System - Support Software Development

    Science.gov (United States)

    Tremblay, Shayne

    2016-01-01

    The Information Architecture Support (IAS) Team, the component of the Spaceport Command and Control System (SCCS) that is in charge of all the pre-runtime data, was in need of some report features to be added to their internal web application, Information Architecture (IA). Development of these reports is crucial for the speed and productivity of the development team, as they are needed to quickly and efficiently make specific and complicated data requests against the massive IA database. These reports were being put on the back burner, as other development of IA was prioritized over them, but the need for them resulted in internships being created to fill this need. The creation of these reports required learning Ruby on Rails development, along with related web technologies, and they will continue to serve IAS and other support software teams and their IA data needs.

  1. Learning from examples - Generation and evaluation of decision trees for software resource analysis

    Science.gov (United States)

    Selby, Richard W.; Porter, Adam A.

    1988-01-01

    A general solution method for the automatic generation of decision (or classification) trees is investigated. The approach is to provide insights through in-depth empirical characterization and evaluation of decision trees for software resource data analysis. The trees identify classes of objects (software modules) that had high development effort. Sixteen software systems ranging from 3,000 to 112,000 source lines were selected for analysis from a NASA production environment. The collection and analysis of 74 attributes (or metrics), for over 4,700 objects, captured information about the development effort, faults, changes, design style, and implementation style. A total of 9,600 decision trees were automatically generated and evaluated. The trees correctly identified 79.3 percent of the software modules that had high development effort or faults, and the trees generated from the best parameter combinations correctly identified 88.4 percent of the modules on the average.

  2. MOIDSS?- Mobile Online Intelligent Decision Support System, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — GRID has had a successfully completed Phase I 'Mobile Online Intelligent Decision Support System' (MOIDSS). The system developed into a total solution that supports...

  3. Review of real-time on-line decision support system RODOS

    International Nuclear Information System (INIS)

    Rossi, J.

    1997-01-01

    RODOS (Real Time Off-site Decision Support System) is a research project, which aims at the development of a versatile decision support system for management of reactor accident off-site consequence assessments in real-time in Europe and in the western parts of the former Soviet Union. The system employs both local and regional environmental radiation monitoring results and meteorological forecasts by means of which the software prepares consistent predictions ranging from the release area to long distances covering all temporal phases of the accident. The data to be obtained from the environment will be processed and based on the mathematical and physical models and it will be prepared to intelligibly form about the prevalent or future environmental radiation situation. The software is intended for operative use of radiation safety authorities. Furthermore, the software is suitable for education and training of rescue field personnel. (refs.)

  4. Review of real-time on-line decision support system RODOS; RODOS-ohjelman arviointi

    Energy Technology Data Exchange (ETDEWEB)

    Rossi, J. [VTT Energy, Espoo (Finland). Nuclear Energy

    1997-01-01

    RODOS (Real Time Off-site Decision Support System) is a research project, which aims at the development of a versatile decision support system for management of reactor accident off-site consequence assessments in real-time in Europe and in the western parts of the former Soviet Union. The system employs both local and regional environmental radiation monitoring results and meteorological forecasts by means of which the software prepares consistent predictions ranging from the release area to long distances covering all temporal phases of the accident. The data to be obtained from the environment will be processed and based on the mathematical and physical models and it will be prepared to intelligibly form about the prevalent or future environmental radiation situation. The software is intended for operative use of radiation safety authorities. Furthermore, the software is suitable for education and training of rescue field personnel. (refs.).

  5. Reliability of decision-support systems for nuclear emergency management

    Energy Technology Data Exchange (ETDEWEB)

    Ionescu, Tudor B.

    2013-08-15

    Decision support systems for nuclear emergency management (DSNE) are currently used worldwide to assist decision makers in taking emergency response countermeasures in case of accidental releases of radioactive materials from nuclear facilities. The present work has been motivated by the fact that, up until now, DSNE systems have not been regarded as safetycritical software systems, such as embedded software currently being used in vehicles and aircraft. The core of any DSNE system is represented by the different simulation codes linked together to form the dispersion simulation workflow. These codes require input emission and meteorological data to produce forecasts of the atmospheric dispersion of radioactive pollutants and other substances. However, the reliability of the system not only depends on the trustworthiness of the measured (or generated) input data but also on the reliability of the simulation codes used. The main goal of this work is to improve the reliability of DSNE systems by adapting current state of the art methods from the domain of software reliability engineering to the case of atmospheric dispersion simulation codes. The current approach is based on the design by diversity principle for improving the reliability of codes and the trustworthiness of results as well as on a flexible fault-tolerant workflow scheduling algorithm for ensuring the maximum availability of the system. The author's contribution is represented by (i) an acceptance test for dispersion simulation results, (ii) an adjudication algorithm (voter) based on comparing taxonomies of dispersion simulation results, and (iii) a feedback-control based fault-tolerant workflow scheduling algorithm. These tools provide means for the continuous verification of dispersion simulation codes while tolerating timing faults caused by disturbances in the underlying computational environment and will thus help increase the reliability and trustworthiness of DSNE systems in missioncritical

  6. Reliability of decision-support systems for nuclear emergency management

    International Nuclear Information System (INIS)

    Ionescu, Tudor B.

    2013-08-01

    Decision support systems for nuclear emergency management (DSNE) are currently used worldwide to assist decision makers in taking emergency response countermeasures in case of accidental releases of radioactive materials from nuclear facilities. The present work has been motivated by the fact that, up until now, DSNE systems have not been regarded as safetycritical software systems, such as embedded software currently being used in vehicles and aircraft. The core of any DSNE system is represented by the different simulation codes linked together to form the dispersion simulation workflow. These codes require input emission and meteorological data to produce forecasts of the atmospheric dispersion of radioactive pollutants and other substances. However, the reliability of the system not only depends on the trustworthiness of the measured (or generated) input data but also on the reliability of the simulation codes used. The main goal of this work is to improve the reliability of DSNE systems by adapting current state of the art methods from the domain of software reliability engineering to the case of atmospheric dispersion simulation codes. The current approach is based on the design by diversity principle for improving the reliability of codes and the trustworthiness of results as well as on a flexible fault-tolerant workflow scheduling algorithm for ensuring the maximum availability of the system. The author's contribution is represented by (i) an acceptance test for dispersion simulation results, (ii) an adjudication algorithm (voter) based on comparing taxonomies of dispersion simulation results, and (iii) a feedback-control based fault-tolerant workflow scheduling algorithm. These tools provide means for the continuous verification of dispersion simulation codes while tolerating timing faults caused by disturbances in the underlying computational environment and will thus help increase the reliability and trustworthiness of DSNE systems in missioncritical

  7. Future of electronic health records: implications for decision support.

    Science.gov (United States)

    Rothman, Brian; Leonard, Joan C; Vigoda, Michael M

    2012-01-01

    The potential benefits of the electronic health record over traditional paper are many, including cost containment, reductions in errors, and improved compliance by utilizing real-time data. The highest functional level of the electronic health record (EHR) is clinical decision support (CDS) and process automation, which are expected to enhance patient health and healthcare. The authors provide an overview of the progress in using patient data more efficiently and effectively through clinical decision support to improve health care delivery, how decision support impacts anesthesia practice, and how some are leading the way using these systems to solve need-specific issues. Clinical decision support uses passive or active decision support to modify clinician behavior through recommendations of specific actions. Recommendations may reduce medication errors, which would result in considerable savings by avoiding adverse drug events. In selected studies, clinical decision support has been shown to decrease the time to follow-up actions, and prediction has proved useful in forecasting patient outcomes, avoiding costs, and correctly prompting treatment plan modifications by clinicians before engaging in decision-making. Clinical documentation accuracy and completeness is improved by an electronic health record and greater relevance of care data is delivered. Clinical decision support may increase clinician adherence to clinical guidelines, but educational workshops may be equally effective. Unintentional consequences of clinical decision support, such as alert desensitization, can decrease the effectiveness of a system. Current anesthesia clinical decision support use includes antibiotic administration timing, improved documentation, more timely billing, and postoperative nausea and vomiting prophylaxis. Electronic health record implementation offers data-mining opportunities to improve operational, financial, and clinical processes. Using electronic health record data

  8. Object-oriented design and programming in medical decision support.

    Science.gov (United States)

    Heathfield, H; Armstrong, J; Kirkham, N

    1991-12-01

    The concept of object-oriented design and programming has recently received a great deal of attention from the software engineering community. This paper highlights the realisable benefits of using the object-oriented approach in the design and development of clinical decision support systems. These systems seek to build a computational model of some problem domain and therefore tend to be exploratory in nature. Conventional procedural design techniques do not support either the process of model building or rapid prototyping. The central concepts of the object-oriented paradigm are introduced, namely encapsulation, inheritance and polymorphism, and their use illustrated in a case study, taken from the domain of breast histopathology. In particular, the dual roles of inheritance in object-oriented programming are examined, i.e., inheritance as a conceptual modelling tool and inheritance as a code reuse mechanism. It is argued that the use of the former is not entirely intuitive and may be difficult to incorporate into the design process. However, inheritance as a means of optimising code reuse offers substantial technical benefits.

  9. Becoming a Mother: Supported Decision-Making in Context

    Science.gov (United States)

    Jamieson, Rhiann; Theodore, Kate; Raczka, Roman

    2016-01-01

    Little is known about how women with intellectual disabilities make decisions in relation to pregnancy. Social support is important for mothers with intellectual disabilities in many areas. This study explored how the support network influenced the decision-making of women with intellectual disabilities in relation to pregnancy. The study extended…

  10. Intelligent decision support system for operators of the supply ...

    African Journals Online (AJOL)

    Intelligent decision support system for operators of the supply department of oil and gas extracting industry. ... PROMOTING ACCESS TO AFRICAN RESEARCH ... abnormal situations, pre-crash sensing, industrial drilling, decision-making support systems. Full Text: EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

  11. Parametric vs. Nonparametric Regression Modelling within Clinical Decision Support

    Czech Academy of Sciences Publication Activity Database

    Kalina, Jan; Zvárová, Jana

    2017-01-01

    Roč. 5, č. 1 (2017), s. 21-27 ISSN 1805-8698 R&D Projects: GA ČR GA17-01251S Institutional support: RVO:67985807 Keywords : decision support systems * decision rules * statistical analysis * nonparametric regression Subject RIV: IN - Informatics, Computer Science OBOR OECD: Statistics and probability

  12. Demonstration of decision support for real time operation

    DEFF Research Database (Denmark)

    Catterson, Victoria; MCarthur, Stephen; Chen, Minjiang

    ELECTRA Deliverable 8.2 reports on the demonstration of decision support within the future control room in light of voltage and frequency control in the 2030+ power system. The decision support must identify key threats and vulnerabilities, and propose and prioritise appropriate interventions....

  13. Decision support modeling for milk valorization

    NARCIS (Netherlands)

    Banaszewska, A.

    2014-01-01

    The research presented in this thesis concerns decision problems in practice that require structured, precise, scientific studies to provide strong, reliable answers. An opportunity to contribute to both practice and science emerged in 2008 when two large, Dutch dairy companies merged, creating

  14. Cost Decision Support in Product Design

    NARCIS (Netherlands)

    Liebers, A.; Kals, H.J.J.

    1997-01-01

    The constraints addressed in decision making during product design, process planning and production planning determine the admissible solution space for the manufacture of products. The solution space determines largely the costs that are incurred in the production process. In order to be able to

  15. Multi-criteria decision analysis using hydrological indicators for decision support - a conceptual framework.

    Science.gov (United States)

    Butchart-Kuhlmann, Daniel; Kralisch, Sven; Meinhardt, Markus; Fleischer, Melanie

    2017-04-01

    Assessing the quantity and quality of water available in water stressed environments under various potential climate and land-use changes is necessary for good water and environmental resources management and governance. Within the region covered by the Southern African Science Service Centre for Climate Change and Adaptive Land Management (SASSCAL) project, such areas are common. One goal of the SASSCAL project is to develop and provide an integrated decision support system (DSS) with which decision makers (DMs) within a given catchment can obtain objective information regarding potential changes in water flow quantity and timing. The SASSCAL DSS builds upon existing data storage and distribution capability, through the SASSCAL Information System (IS), as well as the J2000 hydrological model. Using output from validated J2000 models, the SASSCAL DSS incorporates the calculation of a range of hydrological indicators based upon Indicators of Hydrological Alteration/Environmental Flow Components (IHA/EFC) calculated for a historic time series (pre-impact) and a set of model simulations based upon a selection of possible climate and land-use change scenarios (post-impact). These indicators, obtained using the IHA software package, are then used as input for a multi-criteria decision analysis (MCDA) undertaken using the open source diviz software package. The results of these analyses will provide DMs with an indication as to how various hydrological indicators within a catchment may be altered under different future scenarios, as well providing a ranking of how each scenario is preferred according to different DM preferences. Scenarios are represented through a combination of model input data and parameter settings in J2000, and preferences are represented through criteria weighting in the MCDA. Here, the methodology is presented and applied to the J2000 Luanginga model results using a set of hypothetical decision maker preference values as input for an MCDA based on

  16. Risk Analysis and Decision-Making Software Package (1997 Version) User Manual

    Energy Technology Data Exchange (ETDEWEB)

    Chung, F.T.H.

    1999-02-11

    This manual provides instructions for using the U.S. Department of Energy's (DOE) risk analysis and decision making software (1997 version) developed at BDM Petroleum Technologies by BDM-Oklahoma, Inc. for DOE, under contract No. DE-AC22-94PC91OO8. This software provides petroleum producers with a simple, handy tool for exploration and production risk analysis and decision-making. It collects useful risk analysis tools in one package so that users do not have to use several programs separately. The software is simple to use, but still provides many functions. The 1997 version of the software package includes the following tools: (1) Investment risk (Gambler's ruin) analysis; (2) Monte Carlo simulation; (3) Best fit for distribution functions; (4) Sample and rank correlation; (5) Enhanced oil recovery method screening; and (6) artificial neural network. This software package is subject to change. Suggestions and comments from users are welcome and will be considered for future modifications and enhancements of the software. Please check the opening screen of the software for the current contact information. In the future, more tools will be added to this software package. This manual includes instructions on how to use the software but does not attempt to fully explain the theory and algorithms used to create it.

  17. Evaluation of features to support safety and quality in general practice clinical software

    Science.gov (United States)

    2011-01-01

    Background Electronic prescribing is now the norm in many countries. We wished to find out if clinical software systems used by general practitioners in Australia include features (functional capabilities and other characteristics) that facilitate improved patient safety and care, with a focus on quality use of medicines. Methods Seven clinical software systems used in general practice were evaluated. Fifty software features that were previously rated as likely to have a high impact on safety and/or quality of care in general practice were tested and are reported here. Results The range of results for the implementation of 50 features across the 7 clinical software systems was as follows: 17-31 features (34-62%) were fully implemented, 9-13 (18-26%) partially implemented, and 9-20 (18-40%) not implemented. Key findings included: Access to evidence based drug and therapeutic information was limited. Decision support for prescribing was available but varied markedly between systems. During prescribing there was potential for medicine mis-selection in some systems, and linking a medicine with its indication was optional. The definition of 'current medicines' versus 'past medicines' was not always clear. There were limited resources for patients, and some medicines lists for patients were suboptimal. Results were provided to the software vendors, who were keen to improve their systems. Conclusions The clinical systems tested lack some of the features expected to support patient safety and quality of care. Standards and certification for clinical software would ensure that safety features are present and that there is a minimum level of clinical functionality that clinicians could expect to find in any system.

  18. Using Google Earth in Marine Research and Operational Decision Support

    Science.gov (United States)

    Blower, J. D.; Bretherton, D.; Haines, K.; Liu, C.; Rawlings, C.; Santokhee, A.; Smith, I.

    2006-12-01

    A key advantage of Virtual Globes ("geobrowsers") such as Google Earth is that they can display many different geospatial data types at a huge range of spatial scales. In this demonstration and poster display we shall show how marine data from disparate sources can be brought together in a geobrowser in order to support both scientific research and operational search and rescue activities. We have developed the Godiva2 interactive website for browsing and exploring marine data, mainly output from supercomputer analyses and predictions of ocean circulation. The user chooses a number of parameters (e.g. sea temperature at 100m depth on 1st July 2006) and can load an image of the resulting data in Google Earth. Through the use of an automatically-refreshing NetworkLink the user can explore the whole globe at a very large range of spatial scales: the displayed data will automatically be refreshed to show data at increasingly fine resolution as the user zooms in. This is a valuable research tool for exploring these terabyte- scale datasets. Many coastguard organizations around the world use SARIS, a software application produced by BMT Cordah Ltd., to predict the drift pattern of objects in the sea in order to support search and rescue operations. Different drifting objects have different trajectories depending on factors such as their buoyancy and windage and so a computer model, supported by meteorological and oceanographic data, is needed to help rescuers locate their targets. We shall demonstrate how Google Earth is used to display output from the SARIS model (including the search target location and associated error polygon) alongside meteorological data (wind vectors) and oceanographic data (sea temperature, surface currents) from Godiva2 in order to support decision-making. We shall also discuss the limitations of using Google Earth in this context: these include the difficulties of working with time- dependent data and the need to access data securely. essc

  19. QLIKVIEW APPLICATION - SUPPORT IN DECISION MAKING

    Directory of Open Access Journals (Sweden)

    Luminita SERBANESCU

    2017-12-01

    Full Text Available Control over the company, an objective that any manager wants, can only be exercised on the basis of real and complex business data. For this, a higher level of application is required, with Business Intelligence applications that provide information that no one else can offer faster. Winning time can be used to identify other issues related to available information or activities that add value to the company. After all, management time is a decision, and the decision is valuable only if it occurs at the right time. In this article I presented the benefits of implementing a business intelligence solution in a company, as well as how to design analytical reports using the QlikView application.

  20. Tool Support for Parametric Analysis of Large Software Simulation Systems

    Science.gov (United States)

    Schumann, Johann; Gundy-Burlet, Karen; Pasareanu, Corina; Menzies, Tim; Barrett, Tony

    2008-01-01

    The analysis of large and complex parameterized software systems, e.g., systems simulation in aerospace, is very complicated and time-consuming due to the large parameter space, and the complex, highly coupled nonlinear nature of the different system components. Thus, such systems are generally validated only in regions local to anticipated operating points rather than through characterization of the entire feasible operational envelope of the system. We have addressed the factors deterring such an analysis with a tool to support envelope assessment: we utilize a combination of advanced Monte Carlo generation with n-factor combinatorial parameter variations to limit the number of cases, but still explore important interactions in the parameter space in a systematic fashion. Additional test-cases, automatically generated from models (e.g., UML, Simulink, Stateflow) improve the coverage. The distributed test runs of the software system produce vast amounts of data, making manual analysis impossible. Our tool automatically analyzes the generated data through a combination of unsupervised Bayesian clustering techniques (AutoBayes) and supervised learning of critical parameter ranges using the treatment learner TAR3. The tool has been developed around the Trick simulation environment, which is widely used within NASA. We will present this tool with a GN&C (Guidance, Navigation and Control) simulation of a small satellite system.

  1. Software Support for Optimizing Layout Solution in Lean Production

    Directory of Open Access Journals (Sweden)

    Naqib Daneshjo

    2018-02-01

    Full Text Available As progressive managerial styles, the techniques based on "lean thinking" are being increasingly promoted. They are focused on applying lean production concepts to all phases of product lifecycle and also to business environment. This innovative approach strives to eliminate any wasting of resources and shortens the time to respond to customer requirements, including redesigning the structure of the organization’ supply chain. A lean organization is created mainly by employees, their creative potential, knowledge, self-realization and motivation for continuous improvement of the processes and the production systems. A set of tools, techniques and methods of lean production is basically always very similar. Only a form of their presentation or classification into individual phases of the product lifecycle may differ. The authors present the results of their research from the designing phases of production systems to optimize their dispositional solution with software support and 3D simulation and visualization. Modelling is based on use of Tecnomatix's and Photomodeler's progressive software tools and a dynamic model for capacitive dimensioning of more intelligent production system

  2. Software in support of fuel operation in WWERS

    International Nuclear Information System (INIS)

    Evdokimov, I.A; Novikov, V.V; Ugrumov, A.V; Shishkin, A.A

    2013-01-01

    A software package comprising computer codes and fuel monitoring tools is under development in Russia in support of WWER fuel operation. The software package includes an expert computer system designed for failure diagnosis in course of reactor operation, prediction of activity evolution in primary coolant and express analysis of pellet-to-cladding mechanical interaction (PCMI) on rod-by-rod basis under normal and transient modes of operation. Coupled with the expert system, the first version of a graphical interface computer program is developed for NPP operating bodies. One of the features of this program is to launch automatically a fuel performance code for a series of detailed calculations for fuel rods with severe PCMI. The particular rods for calculations are determined by the expert system during the express core analysis. A greater attention is paid to recent results in prediction of fuel behavior after a primary failure has occurred. One of the major risks to further operation of leaking fuel comes from secondary fuel degradation due to massive cladding hydriding. Threshold conditions for initiation of secondary hydriding have been found on the basis of physical modeling. Final criteria of secondary failure occurrence were deduced by applying the model to analysis of post-irradiation examinations of leaking WWER fuel. (authors)

  3. Decision support for redesigning wastewater treatment technologies.

    Science.gov (United States)

    McConville, Jennifer R; Künzle, Rahel; Messmer, Ulrike; Udert, Kai M; Larsen, Tove A

    2014-10-21

    This paper offers a methodology for structuring the design space for innovative process engineering technology development. The methodology is exemplified in the evaluation of a wide variety of treatment technologies for source-separated domestic wastewater within the scope of the Reinvent the Toilet Challenge. It offers a methodology for narrowing down the decision-making field based on a strict interpretation of treatment objectives for undiluted urine and dry feces and macroenvironmental factors (STEEPLED analysis) which influence decision criteria. Such an evaluation identifies promising paths for technology development such as focusing on space-saving processes or the need for more innovation in low-cost, energy-efficient urine treatment methods. Critical macroenvironmental factors, such as housing density, transportation infrastructure, and climate conditions were found to affect technology decisions regarding reactor volume, weight of outputs, energy consumption, atmospheric emissions, investment cost, and net revenue. The analysis also identified a number of qualitative factors that should be carefully weighed when pursuing technology development; such as availability of O&M resources, health and safety goals, and other ethical issues. Use of this methodology allows for coevolution of innovative technology within context constraints; however, for full-scale technology choices in the field, only very mature technologies can be evaluated.

  4. Decision Performance Using Spatial Decision Support Systems: A Geospatial Reasoning Ability Perspective

    Science.gov (United States)

    Erskine, Michael A.

    2013-01-01

    As many consumer and business decision makers are utilizing Spatial Decision Support Systems (SDSS), a thorough understanding of how such decisions are made is crucial for the information systems domain. This dissertation presents six chapters encompassing a comprehensive analysis of the impact of geospatial reasoning ability on…

  5. Software Packages to Support Electrical Engineering Virtual Lab

    Directory of Open Access Journals (Sweden)

    Manuel Travassos Valdez

    2012-03-01

    Full Text Available The use of Virtual Reality Systems (VRS, as a learning aid, encourages the creation of tools that allow users/students to simulate educational environments on a computer. This article presents a way of building a VRS system with Software Packages to support Electrical Engineering Virtual Laboratories to be used in a near future in the teaching of the curriculum unit of Circuit Theory. The steps required for the construction of a project are presented in this paper. The simulation is still under construction and intends to use a three-dimensional virtual environment laboratory electric measurement, which will allow users/students to experiment and test the modeled equipment. Therefore, there are still no links available for further examination. The result may demonstrate the future potential of applications of Virtual Reality Systems as an efficient and cost-effective learning system.

  6. A Software Architecture for Simulation Support in Building Automation

    Directory of Open Access Journals (Sweden)

    Sergio Leal

    2014-07-01

    Full Text Available Building automation integrates the active components in a building and, thus, has to connect components of different industries. The goal is to provide reliable and efficient operation. This paper describes how simulation can support building automation and how the deployment process of simulation assisted building control systems can be structured. We look at the process as a whole and map it to a set of formally described workflows that can partly be automated. A workbench environment supports the process execution by means of improved planning, collaboration and deployment. This framework allows integration of existing tools, as well as manual tasks, and is, therefore, many more intricate than regular software deployment tools. The complex environment of building commissioning requires expertise in different domains, especially lighting, heating, ventilation, air conditioning, measurement and control technology, as well as energy efficiency; therefore, we present a framework for building commissioning and describe a deployment process that is capable of supporting the various phases of this approach.

  7. Drones: Making faster and smarter decisions with software triggers

    CERN Multimedia

    CERN. Geneva

    2018-01-01

    Data collection rates in high energy physics (HEP), particularly those at the Large Hadron Collider (LHC) are a continuing challenge and require large amounts of computing power to handle. For example, at LHCb an event rate of 1 MHz is processed in a software-based trigger. The purpose of this trigger is to reduce the output data rate to manageable levels, which amounts to a reduction from 60 GB per second to an output data rate of 0.6 GB per second. Machine learning (ML) is becoming an evermore important tool in the data reduction, be it with the identification of interesting event topologies, or the distinction between individual particle species. For the case of LHCb data-taking, over 600 unique signatures are searched for in parallel in real time, each with its own set of requirements. However, only a handful at present make use of machine learning, despite the large ecosystem. Often the reason for this is the relative difficulty in the application of a preferred ML classifier to the C++/Python combinatio...

  8. Decision support systems in nuclear emergencies: A scenario-based comparison of domestic and reference tools

    International Nuclear Information System (INIS)

    Vamanu, D.; Slavnicu, S. D.; Slavnicu, E.; Vamanu, B.

    2004-01-01

    The article reports selective results of a comparison between RODOS - an emerging decision support system for the management of nuclear emergencies in Europe developed by an international research consortium under EEC aegis, and a resident software package developed and maintained for similar purposes at IFIN-HH, Bucharest. Reproducible similarity patterns obtained in the output data distributions provide for simple normalising procedures that may ensure convergent radiological assessments. When properly consolidated on a sufficient scenario casuistry, such procedures could lend a certain resilience to domestic decision support tools over the interim lead time required by the full implementation of RODOS, or other major league, internationally accepted reference systems. (authors)

  9. TUW @ TREC Clinical Decision Support Track

    Science.gov (United States)

    2014-11-01

    and the ShARe/CLEF eHealth Evaluation Lab [8,3] running in 2013 and 2014. Here we briefly describe the goals of the first TREC Clinical Decision...Wendy W. Chapman, David Mart́ınez, Guido Zuccon, and João R. M. Palotti. Overview of the share/clef ehealth evalu- ation lab 2014. In Information Access...Zuccon. Overview of the share/clef ehealth evaluation lab 2013. In Information Access Evaluation. Multilinguality, Multimodality, and Visualization

  10. WEB-GIS Decision Support System for CO2 storage

    Science.gov (United States)

    Gaitanaru, Dragos; Leonard, Anghel; Radu Gogu, Constantin; Le Guen, Yvi; Scradeanu, Daniel; Pagnejer, Mihaela

    2013-04-01

    Environmental decision support systems (DSS) paradigm evolves and changes as more knowledge and technology become available to the environmental community. Geographic Information Systems (GIS) can be used to extract, assess and disseminate some types of information, which are otherwise difficult to access by traditional methods. In the same time, with the help of the Internet and accompanying tools, creating and publishing online interactive maps has become easier and rich with options. The Decision Support System (MDSS) developed for the MUSTANG (A MUltiple Space and Time scale Approach for the quaNtification of deep saline formations for CO2 storaGe) project is a user friendly web based application that uses the GIS capabilities. MDSS can be exploited by the experts for CO2 injection and storage in deep saline aquifers. The main objective of the MDSS is to help the experts to take decisions based large structured types of data and information. In order to achieve this objective the MDSS has a geospatial objected-orientated database structure for a wide variety of data and information. The entire application is based on several principles leading to a series of capabilities and specific characteristics: (i) Open-Source - the entire platform (MDSS) is based on open-source technologies - (1) database engine, (2) application server, (3) geospatial server, (4) user interfaces, (5) add-ons, etc. (ii) Multiple database connections - MDSS is capable to connect to different databases that are located on different server machines. (iii)Desktop user experience - MDSS architecture and design follows the structure of a desktop software. (iv)Communication - the server side and the desktop are bound together by series functions that allows the user to upload, use, modify and download data within the application. The architecture of the system involves one database and a modular application composed by: (1) a visualization module, (2) an analysis module, (3) a guidelines module

  11. Performance evaluation of the machine learning algorithms used in inference mechanism of a medical decision support system.

    Science.gov (United States)

    Bal, Mert; Amasyali, M Fatih; Sever, Hayri; Kose, Guven; Demirhan, Ayse

    2014-01-01

    The importance of the decision support systems is increasingly supporting the decision making process in cases of uncertainty and the lack of information and they are widely used in various fields like engineering, finance, medicine, and so forth, Medical decision support systems help the healthcare personnel to select optimal method during the treatment of the patients. Decision support systems are intelligent software systems that support decision makers on their decisions. The design of decision support systems consists of four main subjects called inference mechanism, knowledge-base, explanation module, and active memory. Inference mechanism constitutes the basis of decision support systems. There are various methods that can be used in these mechanisms approaches. Some of these methods are decision trees, artificial neural networks, statistical methods, rule-based methods, and so forth. In decision support systems, those methods can be used separately or a hybrid system, and also combination of those methods. In this study, synthetic data with 10, 100, 1000, and 2000 records have been produced to reflect the probabilities on the ALARM network. The accuracy of 11 machine learning methods for the inference mechanism of medical decision support system is compared on various data sets.

  12. Performance Evaluation of the Machine Learning Algorithms Used in Inference Mechanism of a Medical Decision Support System

    Directory of Open Access Journals (Sweden)

    Mert Bal

    2014-01-01

    Full Text Available The importance of the decision support systems is increasingly supporting the decision making process in cases of uncertainty and the lack of information and they are widely used in various fields like engineering, finance, medicine, and so forth, Medical decision support systems help the healthcare personnel to select optimal method during the treatment of the patients. Decision support systems are intelligent software systems that support decision makers on their decisions. The design of decision support systems consists of four main subjects called inference mechanism, knowledge-base, explanation module, and active memory. Inference mechanism constitutes the basis of decision support systems. There are various methods that can be used in these mechanisms approaches. Some of these methods are decision trees, artificial neural networks, statistical methods, rule-based methods, and so forth. In decision support systems, those methods can be used separately or a hybrid system, and also combination of those methods. In this study, synthetic data with 10, 100, 1000, and 2000 records have been produced to reflect the probabilities on the ALARM network. The accuracy of 11 machine learning methods for the inference mechanism of medical decision support system is compared on various data sets.

  13. Walkability and Urban Capabilities: evaluation and Planning Decision Support

    Directory of Open Access Journals (Sweden)

    Ivan Blečić

    2015-06-01

    Full Text Available We propose a methodology for the evaluation of urban walkability, and the related software tool for decision and planning support. In the introduction, we discuss the relevance of the concept of walkability for urban quality of life, and attempt to place it within the framework of the capability approach. The central part of the article is dedicated to the presentation of the spatial multi-criteria evaluation model for walkability. Our construction of the walkability in the model proposes a certain change of perspective with regard to the methods suggested thus far: rather than evaluating how a place is walkable in itself, the walkability score we calculate reflects how and where to one can walk from that place, in other words, what is the walkability the place is endowed with. Therefore, the walkability score combines three components: (1 the number of available destinations (urban “opportunities” reachable by foot; (2 their distances; and (3 the quality of pedestrian routes towards those destinations. The quality of pedestrian routes is evaluated on different attributes relevant for walkability, related to the characteristics of the streets and their surrounding environment which contribute to render the route pleasant, secure and attractive. By way of example, in the third part we present an example application on the city of Alghero (Italy.

  14. Decision Support System for Reservoir Management and Operation in Africa

    Science.gov (United States)

    Navar, D. A.

    2016-12-01

    Africa is currently experiencing a surge in dam construction for flood control, water supply and hydropower production, but ineffective reservoir management has caused problems in the region, such as water shortages, flooding and loss of potential hydropower generation. Our research aims to remedy ineffective reservoir management by developing a novel Decision Support System(DSS) to equip water managers with a technical planning tool based on the state of the art in hydrological sciences. The DSS incorporates a climate forecast model, a hydraulic model of the watershed, and an optimization model to effectively plan for the operation of a system of cascade large-scale reservoirs for hydropower production, while treating water supply and flood control as constraints. Our team will use the newly constructed hydropower plants in the Omo Gibe basin of Ethiopia as the test case. Using the basic HIDROTERM software developed in Brazil, the General Algebraic Modeling System (GAMS) utilizes a combination of linear programing (LP) and non-linear programming (NLP) in conjunction with real time hydrologic and energy demand data to optimize the monthly and daily operations of the reservoir system. We compare the DSS model results with the current reservoir operating policy used by the water managers of that region. We also hope the DSS will eliminate the current dangers associated with the mismanagement of large scale water resources projects in Africa.

  15. Distributed Hydrologic Modeling Apps for Decision Support in the Cloud

    Science.gov (United States)

    Swain, N. R.; Latu, K.; Christiensen, S.; Jones, N.; Nelson, J.

    2013-12-01

    Advances in computation resources and greater availability of water resources data represent an untapped resource for addressing hydrologic uncertainties in water resources decision-making. The current practice of water authorities relies on empirical, lumped hydrologic models to estimate watershed response. These models are not capable of taking advantage of many of the spatial datasets that are now available. Physically-based, distributed hydrologic models are capable of using these data resources and providing better predictions through stochastic analysis. However, there exists a digital divide that discourages many science-minded decision makers from using distributed models. This divide can be spanned using a combination of existing web technologies. The purpose of this presentation is to present a cloud-based environment that will offer hydrologic modeling tools or 'apps' for decision support and the web technologies that have been selected to aid in its implementation. Compared to the more commonly used lumped-parameter models, distributed models, while being more intuitive, are still data intensive, computationally expensive, and difficult to modify for scenario exploration. However, web technologies such as web GIS, web services, and cloud computing have made the data more accessible, provided an inexpensive means of high-performance computing, and created an environment for developing user-friendly apps for distributed modeling. Since many water authorities are primarily interested in the scenario exploration exercises with hydrologic models, we are creating a toolkit that facilitates the development of a series of apps for manipulating existing distributed models. There are a number of hurdles that cloud-based hydrologic modeling developers face. One of these is how to work with the geospatial data inherent with this class of models in a web environment. Supporting geospatial data in a website is beyond the capabilities of standard web frameworks and it

  16. The RAGE Game Software Components Repository for Supporting Applied Game Development

    Directory of Open Access Journals (Sweden)

    Krassen Stefanov

    2017-09-01

    Full Text Available This paper presents the architecture of the RAGE repository, which is a unique and dedicated infrastructure that provides access to a wide variety of advanced technology components for applied game development. The RAGE project, which is the principal Horizon2020 research and innovation project on applied gaming, develops up to three dozens of software components (RAGE software assets that are reusable across a wide diversity of game engines, game platforms and programming languages. The RAGE repository provides storage space for assets and their artefacts and is designed as an asset life-cycle management system for defining, publishing, updating, searching and packaging for distribution of these assets. It will be embedded in a social platform for asset developers and other users. A dedicated Asset Repository Manager provides the main functionality of the repository and its integration with other systems. Tools supporting the Asset Manager are presented and discussed. When the RAGE repository is in full operation, applied game developers will be able to easily enhance the quality of their games by including selected advanced game software assets. Making available the RAGE repository system and its variety of software assets aims to enhance the coherence and decisiveness of the applied game industry.

  17. Supporting Informed Decision Making in Prevention of Prostate Cancer

    Directory of Open Access Journals (Sweden)

    Constantino MARTINS

    2015-05-01

    Full Text Available Identifying and making the correct decision on the best health treatment or screening test option can become a difficult task. Therefore is important that the patients get all types of information appropriate to manage their health. Decision aids can be very useful when there is more than one reasonable option about a treatment or uncertain associated with screening tests. The decision aids tools help people to understand their clinical condition, through the description of the different options available. The purpose of this paper is to present the project “Supporting Informed Decision Making In Prevention of Prostate Cancer” (SIDEMP. This project is focused on the creation of a Web-based decision platform specifically directed to screening prostate cancer, that will support the patient in the process of making an informed decision

  18. Intelligent decision technology support in practice

    CERN Document Server

    Neves-Silva, Rui; Jain, Lakhmi; Phillips-Wren, Gloria; Watada, Junzo; Howlett, Robert

    2016-01-01

    This book contains a collection of innovative chapters emanating from topics raised during the 5th KES International Conference on Intelligent Decision Technologies (IDT), held during 2013 at Sesimbra, Portugal. The authors were invited to expand their original papers into a plethora of innovative chapters espousing IDT methodologies and applications. This book documents leading-edge contributions, representing advances in Knowledge-Based and Intelligent Information and Engineering System. It acknowledges that researchers recognize that society is familiar with modern Advanced Information Processing and increasingly expect richer IDT systems. Each chapter concentrates on the theory, design, development, implementation, testing or evaluation of IDT techniques or applications.  Anyone that wants to work with IDT or simply process knowledge should consider reading one or more chapters and focus on their technique of choice. Most readers will benefit from reading additional chapters to access alternative techniq...

  19. DECISION SUPPORT SYSTEMS FOR NEW PROJECT DEVELOPMENT IN FAST MOVING CONSUMER GOODS INDUSTRIES

    Directory of Open Access Journals (Sweden)

    NINKO KOSTOVSKI

    2017-10-01

    Full Text Available In any contemporary business, decision makers are confronted with increasing amount of information, not necessarily incorporated properly into decision making process. Moreover, decision makers show several cognitive limitations and biases. Managerial decision support systems are intended to assist decision makers in taking advantage of available information. Research proved that that these systems could compensate for the relative weaknesses of the managers as decision makers. They prevent common biases of human decision-making and foster objective and reliable information. With number of variables that must be taken into consideration, internal and external, technological, financial and market related, the new product development and the specifics of that process in fast moving consumer goods industries is perfect for application of computerized decision support system. The results of implementation of such system based on Exsys Corvid in processed food industry are presented with review of overall impressions for the usefulness of the new software, provided by the managers involved in the process. They found that the system consistently offers realistic decisions, that the system is convenient for capturing the institutional knowledge of the process, but also that the system not always follows the standard procedure. They think that the system is user-friendly. However, the implemented system will be useful and consistently outperform expectations only if the company is ready to continuously upgrade the embedded tacit institutional knowledge and experience. However, doing so, the company should never neglect the consumers changing preferences as the most important environmental domain of information critical for new product development.

  20. Towards an integrated approach in supporting microbiological food safety decisions

    NARCIS (Netherlands)

    Havelaar, A.H.; Bräunig, J.; Christiansen, K.; Cornu, M.; Hald, T.; Mangen, M.J.J.; Molbak, K.; Pielaat, A.; Snary, E.; Pelt, van W.; Velthuis, A.G.J.; Wahlström, H.

    2007-01-01

    Decisions on food safety involve consideration of a wide range of concerns including the public health impact of foodborne illness, the economic importance of the agricultural sector and the food industry, and the effectiveness and efficiency of interventions. To support such decisions, we propose

  1. A Gaussian decision-support tool for engineering design process

    NARCIS (Netherlands)

    Rajabali Nejad, Mohammadreza; Spitas, Christos

    2013-01-01

    Decision-making in design is of great importance, resulting in success or failure of a system (Liu et al., 2010; Roozenburg and Eekels, 1995; Spitas, 2011a). This paper describes a robust decision-support tool for engineering design process, which can be used throughout the design process in either

  2. A spatial decision support system for pipe-break susceptibility ...

    African Journals Online (AJOL)

    lying properties. Existing decision support systems available in the field of water distribution system maintenance mainly focus on leak detection and pipe rehabilitation/replacement strategies. These existing systems, however, do not address the ...

  3. Spreadsheet Decision Support Model for Training Exercise Material Requirements Planning

    National Research Council Canada - National Science Library

    Tringali, Arthur

    1997-01-01

    This thesis focuses on developing a spreadsheet decision support model that can be used by combat engineer platoon and company commanders in determining the material requirements and estimated costs...

  4. Marketing Decision Support Systems: Adoption, Use and Satisfaction

    NARCIS (Netherlands)

    B. Wierenga (Berend); P.A.M. Oude Ophuis (Peter)

    1997-01-01

    textabstractThis paper deals with marketing decision support systems (MDSS) in companies. In a conceptual framework five categories of factors are distinguished that potentially affect adoption, use, and satisfaction: external environment factors, organizational factors, task environment factors,

  5. A decision support system-based procedure for evaluation and ...

    Indian Academy of Sciences (India)

    with an overview of the web-based Decision Support System (DSS) developed to facilitate its wide adop- tion. .... contributes significant catchment management and water supply functions .... experience in engagement and facilitation methods.

  6. Combining morphological analysis and Bayesian Networks for strategic decision support

    CSIR Research Space (South Africa)

    De Waal, AJ

    2007-12-01

    Full Text Available Morphological analysis (MA) and Bayesian networks (BN) are two closely related modelling methods, each of which has its advantages and disadvantages for strategic decision support modelling. MA is a method for defining, linking and evaluating...

  7. Mobile Contextualized learning games for decision support training

    NARCIS (Netherlands)

    Klemke, Roland

    2014-01-01

    This interactive workshop session introduces mobile serious games as situated, contextualized learning games. Example cases for mobile serious games for decision support training are introduced and discussed. Participants will get to know contextualization techniques used in modern mobile devices

  8. Mobile Contextualized learning games for decision support training

    NARCIS (Netherlands)

    Klemke, Roland; Börner, Dirk; Suarez, Angel; Schneider, Jan; Antonaci, Alessandra

    2015-01-01

    This interactive workshop session introduces mobile serious games as situated, contextualized learning games. Example cases for mobile serious games for decision support training are introduced and discussed. Participants will get to know contextualization techniques used in modern mobile

  9. Choices: An Interactive Decision Support Program for Breast Cancer Treatment

    National Research Council Canada - National Science Library

    Pierce, Penny Fay

    1998-01-01

    This project is developing a computer-assisted prototype of an individualized decision support system, called Choices, to assist women newly diagnosed with breast cancer in making stressful treatment...

  10. Marketing decision support systems: Adoption, use and satisfaction.

    NARCIS (Netherlands)

    Wierenga, B.; Oude Ophuis, P.A.M.

    1997-01-01

    This paper deals with marketing decision support systems (MDSS) in companies. In a conceptual framework five categories of factors are distinguished that potentially affect adoption, use, and satisfaction: external environment factors, organizational factors, task environment factors, user factors

  11. A Geospatial Decision Support System Toolkit, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose to build and commercialize a working prototype Geospatial Decision Support Toolkit (GeoKit). GeoKit will enable scientists, agencies, and stakeholders to...

  12. Automated support for experience-based software management

    Science.gov (United States)

    Valett, Jon D.

    1992-01-01

    To effectively manage a software development project, the software manager must have access to key information concerning a project's status. This information includes not only data relating to the project of interest, but also, the experience of past development efforts within the environment. This paper describes the concepts and functionality of a software management tool designed to provide this information. This tool, called the Software Management Environment (SME), enables the software manager to compare an ongoing development effort with previous efforts and with models of the 'typical' project within the environment, to predict future project status, to analyze a project's strengths and weaknesses, and to assess the project's quality. In order to provide these functions the tool utilizes a vast corporate memory that includes a data base of software metrics, a set of models and relationships that describe the software development environment, and a set of rules that capture other knowledge and experience of software managers within the environment. Integrating these major concepts into one software management tool, the SME is a model of the type of management tool needed for all software development organizations.

  13. Evaluation of decision support systems for nuclear accidents

    International Nuclear Information System (INIS)

    Sdouz, G.; Mueck, K.

    1998-05-01

    In order to adopt countermeasures to protect the public after an accident in a nuclear power plant in an appropriate and optimum way, decision support systems offer a valuable assistance in supporting the decision maker in choosing and optimizing protective actions. Such decision support systems may range from simple systems to accumulate relevant parameters for the evaluation of the situation over prediction models for the rapid evaluation of the dose to be expected to systems which permit the evaluation and comparison of possible countermeasures. Since the establishment of a decision support systems obviously is also required in Austria, an evaluation of systems available or in the state of development in other countries or unions was performed. The aim was to determine the availability of decision support systems in various countries and to evaluate them with regard to depth and extent of the system. The evaluation showed that in most industrialized countries the requirement for a decision support system was realized, but in only few countries actual systems are readily available and operable. Most systems are limited to early phase consequences, i.e. dispersion calculations of calculated source terms and the estimation of exposure in the vicinity of the plant. Only few systems offer the possibility to predict long-term exposures by ingestion. Few systems permit also an evaluation of potential countermeasures, in most cases, however, limited to a few short-term countermeasures. Only one system which is presently not operable allows the evaluation of a large number of agricultural countermeasures. In this report the different systems are compared. The requirements with regard to an Austrian decision support system are defined and consequences for a possible utilization of a DSS or parts thereof for the Austrian decision support system are derived. (author)

  14. Development of a Common User Interface for the Launch Decision Support System

    Science.gov (United States)

    Scholtz, Jean C.

    1991-01-01

    The Launch Decision Support System (LDSS) is software to be used by the NASA Test Director (NTD) in the firing room during countdown. This software is designed to assist the NTD with time management, that is, when to resume from a hold condition. This software will assist the NTD in making and evaluating alternate plans and will keep him advised of the existing situation. As such, the interface to this software must be designed to provide the maximum amount of information in the clearest fashion and in a timely manner. This research involves applying user interface guidelines to a mature prototype of LDSS and developing displays that will enable the users to easily and efficiently obtain information from the LDSS displays. This research also extends previous work on organizing and prioritizing human-computer interaction knowledge.

  15. Whose decision is it anyway? How clinicians support decision-making participation after acquired brain injury.

    Science.gov (United States)

    Knox, Lucy; Douglas, Jacinta M; Bigby, Christine

    2013-01-01

    To raise professional awareness of factors that may influence the support offered by clinicians to people with acquired brain injury (ABI), and to consider the potential implications of these factors in terms of post-injury rehabilitation and living. A review of the literature was conducted to identify factors that determine how clinicians provide support and influence opportunities for individuals with ABI to participate in decision making across the rehabilitation continuum. Clinical case studies are used to highlight two specific issues: (1) hidden assumptions on the part of the practitioner, and (2) perceptions of risk operating in clinical practice. There are a range of factors which may influence the decision-making support provided by clinicians and, ultimately, shape lifetime outcomes for individuals with ABI. A multidimensional framework may assist clinicians to identify relevant factors and consider their potential implications including those that influence how clinicians involved in supporting decision making approach this task. Participation in decision making is an undisputed human right and central to the provision of person-centred care. Further research is required to understand how clinical practice can maximise both opportunities and support for increased decision-making participation by individuals with ABI. There is an increasing focus on the rights of all individuals to be supported to participate in decision making about their life. A number of changes associated with ABI mean that individuals with ABI will require support with decision making. Clinicians have a critical role in providing this support over the course of the rehabilitation continuum. Clinicians need to be aware of the range of factors that may influence the decision-making support they provide. A multidimensional framework may be used by clinicians to identify influences on the decision-making support they provide.

  16. Probabilistic source term predictions for use with decision support systems

    International Nuclear Information System (INIS)

    Grindon, E.; Kinniburgh, C.G.

    2003-01-01

    Full text: Decision Support Systems for use in off-site emergency management, following an incident at a Nuclear Power Plant (NPP) within Europe, are becoming accepted as a useful and appropriate tool to aid decision makers. An area which is not so well developed is the 'upstream' prediction of the source term released into the environment. Rapid prediction of this source term is crucial to the appropriate early management of a nuclear emergency. The initial source term prediction would today be typically based on simple tabulations taking little, or no, account of plant status. It is the interface between the inward looking plant control room team and the outward looking off-site emergency management team that needs to be addressed. This is not an easy proposition as these two distinct disciplines have little common basis from which to communicate their immediate findings and concerns. Within the Euratom Fifth Framework Programme (FP5), complementary approaches are being developed to the pre-release stage; each based on software tools to help bridge this gap. Traditionally source terms (or releases into the environment) provided for use with Decision Support Systems are estimated on a deterministic basis. These approaches use a single, deterministic assumption about plant status. The associated source term represents the 'best estimate' based an available information. No information is provided an the potential for uncertainty in the source term estimate. Using probabilistic methods the outcome is typically a number of possible plant states each with an associated source term and probability. These represent both the best estimate and the spread of the likely source term. However, this is a novel approach and the usefulness of such source term prediction tools is yet to be tested on a wide scale. The benefits of probabilistic source term estimation are presented here; using, as an example, the SPRINT tool developed within the FP5 STERPS project. System for the

  17. Radioecology and Environmental Decision Support Systems

    International Nuclear Information System (INIS)

    Semioshkina, N.; Voigt, G.; Fiedler, I.

    2015-01-01

    According to Wikipedia Radioecology is a branch of ecology, which studies how radioactive substances interact with nature; how different mechanisms affect the substances’ migration and uptake in food chains and ecosystems. Investigations in radioecology might include aspects of field sampling, designed field and laboratory experiments and the development of predictive simulation models. This science combines techniques from some of the more basic, traditional fields, such as physics, chemistry, mathematics, biology, and ecology, with applied concepts in radiation protection. Radioecological studies form the basis for estimating doses and assessing the consequences of radioactive pollution for human health and the environment. Significant economic and social disruptions arise after radioactive contamination of land as a result of releases of radioactivity into the environment be it from accidents, routine and war operations or during decommissioning and waste management of nuclear facilities. Measures carried out to reduce and minimise radiation doses to the public can give rise to even more concerns as often they are not understood and the stakeholders are often not involved into the decision making process. Countermeasures are needed to reduce population exposure, at the same time minimising economic and social costs. The effectiveness of countermeasures is not only highly dependent on factors which are connected to environmental transfer, but also to special behaviour and consumption behaviours in varying food production systems. A central aspect of radioecology is the identification of vulnerable areas which, by virtue of the processes governing the transfer of radiocaesium through food chains, deliver high individual, or collective doses to man. Social factors (e.g. dietary preferences) and agricultural production techniques also contribute to vulnerability. (author)

  18. What influences parents' decisions to limit or withdraw life support?

    Science.gov (United States)

    Sharman, Mahesh; Meert, Kathleen L; Sarnaik, Ashok P

    2005-09-01

    Decisions to forgo life support from critically ill children are commonly faced by parents and physicians. Previous research regarding parents' perspectives on the decision-making process has been limited by retrospective methods and the use of closed-ended questionnaires. We prospectively identified and described parents' self-reported influences on decisions to forgo life support from their children. Deeper understanding of parents' views will allow physicians to focus end-of-life discussions on factors important to parents and help resolve conflicts. Prospective, qualitative pilot study. Pediatric intensive care unit of a university-affiliated children's hospital. A total of 14 parents of ten children whose pediatric intensive care unit physician had made a recommendation to limit or withdraw life support. : In-depth, semistructured interviews were conducted with parents during their decision-making process. Factors influencing the parents in this study in their decision to forgo life support included their previous experience with death and end-of-life decision making for others, their personal observations of their child's suffering, their perceptions of their child's will to survive, their need to protect and advocate for their child, and the family's financial resources and concerns regarding life-long care. Parents in this study expressed the desire to do what is best for their child but struggled with feelings of selfishness, guilt, and the need to avoid agony and sorrow. Physician recommendations, review of options, and joint formulation of a plan helped parents gain a sense of control over their situation. Parents of eight children agreed to forgo life support and parents of two did not. Prospective interviews with open-ended questions identified factors influencing parents' decision making not previously described in the critical care literature such as parents' past experiences with end-of-life decisions and their anticipated emotional adjustments and

  19. Decision support systems for recovery of endangered species

    International Nuclear Information System (INIS)

    Armstrong, C.E.

    1995-01-01

    The listing of a species as endangered under the Endangered Species Act invokes a suite of responses to help improve conditions for the recovery of that species, to include identification of stressors contributing to population loss, decision analysis of the impacts of proposed recovery options, and implementation of optimal recovery measures. The ability of a decision support system to quantify inherent stressor uncertainties and to identify the key stressors that can be controlled or eliminated becomes key to ensuring the recovery of an endangered species. The listing of the Snake River sockeye, spring/summer chinook, and fall chinook salmon species in the Snake River as endangered provides a vivid example of the importance of sophisticated decision support systems. Operational and physical changes under consideration at eight of the hydroelectric dams along the Columbia and Lower Snake River pose significant financial impacts to a variety of stakeholders involved in the salmon population recovery process and carry significant uncertainties of outcome. A decision support system is presented to assist in the identification of optimal recovery actions for this example that includes the following: creation of datamarts of information on environmental, engineering, and ecological values that influence species survival; incorporation of decision analysis tools to determine optimal decision policies; and the use of geographic information systems (GIS) to provide a context for decision analysis and to communicate the impacts of decision policies

  20. Group decision support system for customer-driven product design

    Science.gov (United States)

    Lin, Zhihang; Chen, Hang; Chen, Kuen; Che, Ada

    2000-10-01

    This paper describes the work on the development of a group decision support system for customer driven product design. The customer driven is to develop products, which meet all customer requirements in whole life cycle of products. A process model of decision during product primary design is proposed to formulate the structured, semi-structured and unstructured decision problems. The framework for the decision support system is presented that integrated both advances in the group decision making and distributed artificial intelligent. The system consists of the product primary design tool kit and the collaborative platform with multi-agent structure. The collaborative platform of the system and the product primary design tool kit, including the VOC (Voice of Customer) tool, QFD (Quality Function Deployment) tool, the Conceptual design tool, Reliability analysis tool and the cost and profit forecasting tool, are indicated.

  1. A crisis management decision support system to reduce ingestion dose

    International Nuclear Information System (INIS)

    Schenker-Wicki, A.; Gibbert, R.

    1993-01-01

    Environmental accidents such as extensive radioactive or chemical contamination can have more serious consequences for a population than any other kind of accidents known before. Owing to the serious consequences and the high number of people who may be affected, the selection of the best countermeasures to ameliorate the imminent impact is very difficult and the political responsibility is enormous. To help overcome such problems the National Emergency Operations Center in Zurich (Switzerland) has developed a decision support system to evaluate acceptable countermeasures for reducing ingestion dose after an accidental release of radioactive material. The system involves all the necessary modules and techniques for efficient decision making, based on the most recent developments in decision theory as well as the necessary structuring of the decision-making process. The decision-making concept comprehends decision making on two different levels, a technical and a political one. (author)

  2. Prototype of Decision Support System Development in Determining Raskin Recipients Candidate

    Directory of Open Access Journals (Sweden)

    D. Desriyanti

    2017-10-01

    Full Text Available Decision-making support systems for beneficiaries deserving of the poor are a decision support system that can be used as a tool for assessing the feasibility of providing assistance. The established system only knows the rankings of the population proposals, the population data that has not been stored in the population database, the population data that has not been integrated with the data category, the criteria data, and value data so it requires the process of data input. In the process of data collection methods used are Interviews, Observation, Documentation, Literature Review while the software development methodology used is Prototype. The process of making software by using Macromedia Dreamweaver, language programming used is PHP, Javascript, HTML, and Cascading Style Sheet (CSS. This research aims 1 Make the development of decision support system in giving assistance for the poor in Cekok Ponorogo. 2 Conduct the mapping for proposed poor family and received assistance in graphic form. The conclusions of the development of decision support systems are; 1 Population data stored in the form of database that facilitate the process of searching data. 2 The Recorded of the proposed data and who received assistance for each hamlet in Kelurahan Cekok Ponorogo in the form of a graph. 3 Reduce errors in the submission the proposed data of potential beneficiaries

  3. Development of a decision support system for off-site emergency management in the early phase of a nuclear accident

    International Nuclear Information System (INIS)

    Datta, D.; Sharma, R.M.

    2002-01-01

    Full text: Experience gained after the Chernobyl accident clearly demonstrated the importance of improving administrative, organizational and technical emergency management arrangements in India. The more important areas where technical improvements were needed were early warning monitoring, communication networks for the rapid and reliable exchange of radiological and other information and decision support systems for off-site emergency management. A PC based artificial intelligent software has been developed to have a decision support system that can easily implement to manage off-site nuclear emergency and subsequently analyze the off-site consequences of the nuclear accident. A decision support tool, STEPS (source term estimate based on plant status), that provides desired input to the present software was developed. The tool STEPS facilitates meta knowledge of the system. The paper describes the details of the design of the software, functions of various modules, tuning of respective knowledge base and overall its scope in real sense in nuclear emergency preparedness and response

  4. Decision Support System for Hepatitis Disease Diagnosis using Bayesian Network

    Directory of Open Access Journals (Sweden)

    Shamshad Lakho

    2017-12-01

    Full Text Available Medical judgments are tough and challenging as the decisions are often based on the deficient and ambiguous information. Moreover, the result of decision process has direct effects on human lives. The act of human decision declines in emergency situations due to the complication, time limit, and high risks. Therefore, provision of medical diagnosis plays a dynamic role, specifically in the preliminary stage when a physician has limited diagnosis experience and identifies the directions to be taken for the treatment process. Computerized Decision Support Systems have brought a revolution in the medical diagnosis. These automatic systems support the diagnosticians in the course of diagnosis. The major role of Decision Support Systems is to support the medical personnel in decision-making procedures regarding disease diagnosis and treatment recommendation. The proposed system provides easy support in Hepatitis disease recognition. The system is developed using the Bayesian network model. The physician provides the input to the system in the form of symptoms stated by the patient. These signs and symptoms match with the casual relationships present in the knowledge model. The Bayesian network infers conclusion from the knowledge model and calculates the probability of occurrence of Hepatitis B, C and D disorders.

  5. Decision support tools to support the operations of traffic management centers (TMC)

    Science.gov (United States)

    2011-01-31

    The goal of this project is to develop decision support tools to support traffic management operations based on collected intelligent transportation system (ITS) data. The project developments are in accordance with the needs of traffic management ce...

  6. Systems Analysis and Design for Decision Support Systems on Economic Feasibility of Projects

    Science.gov (United States)

    Balaji, S. Arun

    2010-11-01

    This paper discuss about need for development of the Decision Support System (DSS) software for economic feasibility of projects in Rwanda, Africa. The various economic theories needed and the corresponding formulae to compute payback period, internal rate of return and benefit cost ratio of projects are clearly given in this paper. This paper is also deals with the systems flow chart to fabricate the system in any higher level computing language. The various input requirements from the projects and the output needed for the decision makers are also included in this paper. The data dictionary used for input and output data structure is also explained.

  7. Design of nuclear emergency decision-making support system based on the results of radiation monitoring

    International Nuclear Information System (INIS)

    Zheng Qiyan; Zhang Lijun; Huang Weiqi; Chen Lin

    2010-01-01

    For nuclear emergency decision-making support system based on the results of radiation monitoring, its main assignment is receiving radiation monitoring data and analyzing them, to accomplish some works such as environment influence evaluation, dose assessment for emergency responder, decision-making analyzing and effectiveness evaluation for emergency actions, etc.. This system is made up of server, communication terminal, data-analyzing terminal, GPRS modules, printer, and so on. The whole system make of a LAN. The system's software is made up of six subsystems: data-analyzing subsystem, reporting subsystem, GIS subsystem, communication subsystem, user-managing subsystem and data-base. (authors)

  8. Decision support tools in conservation: a workshop to improve user-centred design

    Directory of Open Access Journals (Sweden)

    David Rose

    2017-09-01

    Full Text Available A workshop held at the University of Cambridge in May 2017 brought developers, researchers, knowledge brokers, and users together to discuss user-centred design of decision support tools. Decision support tools are designed to take users through logical decision steps towards an evidence-informed final decision. Although they may exist in different forms, including on paper, decision support tools are generally considered to be computer- (online, software or app-based. Studies have illustrated the potential value of decision support tools for conservation, and there are several papers describing the design of individual tools. Rather less attention, however, has been placed on the desirable characteristics for use, and even less on whether tools are actually being used in practice. This is concerning because if tools are not used by their intended end user, for example a policy-maker or practitioner, then its design will have wasted resources. Based on an analysis of papers on tool use in conservation, there is a lack of social science research on improving design, and relatively few examples where users have been incorporated into the design process. Evidence from other disciplines, particularly human-computer interaction research, illustrates that involving users throughout the design of decision support tools increases the relevance, usability, and impact of systems. User-centred design of tools is, however, seldom mentioned in the conservation literature. The workshop started the necessary process of bringing together developers and users to share knowledge about how to conduct good user-centred design of decision support tools. This will help to ensure that tools are usable and make an impact in conservation policy and practice.

  9. Computerised decision support systems for healthcare professionals: an interpretative review.

    Science.gov (United States)

    Cresswell, Kathrin; Majeed, Azeem; Bates, David W; Sheikh, Aziz

    2012-01-01

    Computerised decision support systems are designed to support clinicians in making decisions and thereby enhance the quality and safety of care. We aimed to undertake an interpretative review of the empirical evidence on computerised decision support systems, their contexts of use, and summarise evidence on the effectiveness of these tools and insights into how these can be successfully implemented and adopted. We systematically searched the empirical literature to identify systematic literature reviews on computerised decision support applications and their impact on the quality and safety of healthcare delivery over a 13-year period (1997-2010). The databases searched included: MEDLINE, EMBASE, The Cochrane Database of Systematic Reviews, Database of Abstracts of Reviews of Effects, The Cochrane Central Register of Controlled Trials, The Cochrane Methodology Register, The Health Technology Assessment Database, and The National Health Service (NHS) Economic Evaluation Database. To be eligible for inclusion, systematic reviews needed to address computerised decision support systems, and at least one of the following: impact on safety; quality; or organisational, implementation or adoption considerations. Our searches yielded 121 systematic reviews relating to eHealth, of which we identified 41 as investigating computerised decision support systems. These indicated that, whilst there was a lack of investigating potential risks, such tools can result in improvements in practitioner performance in the promotion of preventive care and guideline adherence, particularly if specific information is available in real time and systems are effectively integrated into clinical workflows. However, the evidence regarding impact on patient outcomes was less clear-cut with reviews finding either no, inconsistent or modest benefits. Whilst the potential of clinical decision support systems in improving, in particular, practitioner performance is considerable, such technology may

  10. Decision-making on olympic urban development - multi-actor decision support tool

    NARCIS (Netherlands)

    Heurkens, E.W.T.M.

    Subject of study is the possible organisation of the Olympic Games of 2028 in the Netherlands, as seen from an urban development viewpoint. The project focuses on the decision-making process in the initiative phase. Aim of the project is the development of a decision support tool for the complex,

  11. Composite decision support by combining cost-benefit and multi-criteria decision

    DEFF Research Database (Denmark)

    Barfod, Michael Bruhn; Salling, Kim Bang; Leleur, Steen

    2011-01-01

    This paper concerns composite decision support based on combining cost-benefit analysis (CBA) with multi-criteria decision analysis (MCDA) for the assessment of economic as well as strategic impacts within transport projects. Specifically a composite model for assessment (COSIMA) is presented...

  12. Bayesian networks for clinical decision support: A rational approach to dynamic decision-making under uncertainty

    NARCIS (Netherlands)

    Gerven, M.A.J. van

    2007-01-01

    This dissertation deals with decision support in the context of clinical oncology. (Dynamic) Bayesian networks are used as a framework for (dynamic) decision-making under uncertainty and applied to a variety of diagnostic, prognostic, and treatment problems in medicine. It is shown that the proposed

  13. DECISION SUPPORT SYSTEMS IN MILITARY ACTIONS: NECESSITY, POSSIBILITIES AND CONSTRAINTS

    Directory of Open Access Journals (Sweden)

    Elena ŞUŞNEA

    2012-01-01

    Full Text Available Nowadays, modern organizations cannot resort to the decision-making process without relying on information and communication technology if they want to be successful. Thus, besides information as an important input of this process, the tools and techniques used by decision-makers are equally important in the support and validation of their decisions. All this is also valid for the military organizations and their specific tasks and activities. A fortiori military commanders face some of the most diff cult and high-stake decision issues meaningful not only at the level of the military, but also for the humankind. Under these circumstances and as a result of an increase in the diversity and complexity of conflict situations, in the information and technology means employed by opponents in warfare and in the amount of information needed to be processed in real time, decision support systems become a necessity. Starting from the aforementioned inevitable requirement, the aim of this article is to emphasize the possibilities and constraints in developing an intelligent decision support system that assists commanders in making scientific decisions on time, under the right circumstances, for the right costs.

  14. Reviewing model application to support animal health decision making.

    Science.gov (United States)

    Singer, Alexander; Salman, Mo; Thulke, Hans-Hermann

    2011-04-01

    Animal health is of societal importance as it affects human welfare, and anthropogenic interests shape decision making to assure animal health. Scientific advice to support decision making is manifold. Modelling, as one piece of the scientific toolbox, is appreciated for its ability to describe and structure data, to give insight in complex processes and to predict future outcome. In this paper we study the application of scientific modelling to support practical animal health decisions. We reviewed the 35 animal health related scientific opinions adopted by the Animal Health and Animal Welfare Panel of the European Food Safety Authority (EFSA). Thirteen of these documents were based on the application of models. The review took two viewpoints, the decision maker's need and the modeller's approach. In the reviewed material three types of modelling questions were addressed by four specific model types. The correspondence between tasks and models underpinned the importance of the modelling question in triggering the modelling approach. End point quantifications were the dominating request from decision makers, implying that prediction of risk is a major need. However, due to knowledge gaps corresponding modelling studies often shed away from providing exact numbers. Instead, comparative scenario analyses were performed, furthering the understanding of the decision problem and effects of alternative management options. In conclusion, the most adequate scientific support for decision making - including available modelling capacity - might be expected if the required advice is clearly stated. Copyright © 2011 Elsevier B.V. All rights reserved.

  15. Education for Medical Decision Support at EuroMISE Centre

    Czech Academy of Sciences Publication Activity Database

    Martinková, Patrícia; Zvára Jr., Karel; Dostálová, T.; Zvárová, Jana

    2013-01-01

    Roč. 1, č. 1 (2013), s. 40-40 ISSN 1805-8698. [EFMI 2013 Special Topic Conference. 17.04.2013-19.04.2013, Prague] Institutional support: RVO:67985807 Keywords : education * decision support * knowledge evaluation * e-learning Subject RIV: IN - Informatics, Computer Science

  16. System for Selection of Relevant Information for Decision Support

    Czech Academy of Sciences Publication Activity Database

    Kalina, Jan; Seidl, L.; Zvára, K.; Grünfeldová, H.; Slovák, Dalibor; Zvárová, Jana

    2013-01-01

    Roč. 1, č. 1 (2013), s. 46-46 ISSN 1805-8698. [EFMI 2013 Special Topic Conference. 17.04.2013-19.04.2013, Prague] Institutional support: RVO:67985807 Keywords : decision support system * web-service * information extraction * high-dimension * gene expressions Subject RIV: IN - Informatics, Computer Science

  17. Software Support of Modelling using Ergonomic Tools in Engineering

    Directory of Open Access Journals (Sweden)

    Darina Dupláková

    2017-08-01

    Full Text Available One of the preconditions for correct development of industrial production is continuous interconnecting of virtual reality and real world by computer software. Computer software are used for product modelling, creation of technical documentation, scheduling, management and optimization of manufacturing processes, and efficiency increase of human work in manufacturing plants. This article describes the frequent used ergonomic software which helping to increase of human work by error rate reducing, risks factors of working environment, injury in workplaces and elimination of arising occupational diseases. They are categorized in the field of micro ergonomics and they are applicable at the manufacturing level with flexible approach in solving of established problems.

  18. Decision making model design for antivirus software selection using Factor Analysis and Analytical Hierarchy Process

    Directory of Open Access Journals (Sweden)

    Nurhayati Ai

    2018-01-01

    Full Text Available Virus spread increase significantly through the internet in 2017. One of the protection method is using antivirus software. The wide variety of antivirus software in the market tends to creating confusion among consumer. Selecting the right antivirus according to their needs has become difficult. This is the reason we conduct our research. We formulate a decision making model for antivirus software consumer. The model is constructed by using factor analysis and AHP method. First we spread questionnaires to consumer, then from those questionnaires we identified 16 variables that needs to be considered on selecting antivirus software. This 16 variables then divided into 5 factors by using factor analysis method in SPSS software. These five factors are security, performance, internal, time and capacity. To rank those factors we spread questionnaires to 6 IT expert then the data is analyzed using AHP method. The result is that performance factors gained the highest rank from all of the other factors. Thus, consumer can select antivirus software by judging the variables in the performance factors. Those variables are software loading speed, user friendly, no excessive memory use, thorough scanning, and scanning virus fast and accurately.

  19. Barriers to and facilitators of implementing shared decision making and decision support in a paediatric hospital: A descriptive study.

    Science.gov (United States)

    Boland, Laura; McIsaac, Daniel I; Lawson, Margaret L

    2016-04-01

    To explore multiple stakeholders' perceived barriers to and facilitators of implementing shared decision making and decision support in a tertiary paediatric hospital. An interpretive descriptive qualitative study was conducted using focus groups and interviews to examine senior hospital administrators', clinicians', parents' and youths' perceived barriers to and facilitators of shared decision making and decision support implementation. Data were analyzed using inductive thematic analysis. Fifty-seven stakeholders participated. Six barrier and facilitator themes emerged. The main barrier was gaps in stakeholders' knowledge of shared decision making and decision support. Facilitators included compatibility between shared decision making and the hospital's culture and ideal practices, perceptions of positive patient and family outcomes associated with shared decision making, and positive attitudes regarding shared decision making and decision support. However, youth attitudes regarding the necessity and usefulness of a decision support program were a barrier. Two themes were both a barrier and a facilitator. First, stakeholder groups were uncertain which clinical situations are suitable for shared decision making (eg, new diagnoses, chronic illnesses, complex decisions or urgent decisions). Second, the clinical process may be hindered if shared decision making and decision support decrease efficiency and workflow; however, shared decision making may reduce repeat visits and save time over the long term. Specific knowledge translation strategies that improve shared decision making knowledge and match specific barriers identified by each stakeholder group may be required to promote successful shared decision making and decision support implementation in the authors' paediatric hospital.

  20. Human-centred radiological software techniques supporting improved nuclear safety

    International Nuclear Information System (INIS)

    Szoeke, Istvan; Johnsen, Terje

    2013-01-01

    The Institute for Energy Technology (IFE) is an international research foundation for energy and nuclear technology. IFE is also the host for the international OECD Halden Reactor Project. The Software Engineering Department in the Man Technology Organisation at IFE is a leading international centre of competence for the development and evaluation of human-centred technologies, process visualisation, and the lifecycle of high integrity software important to safety. This paper is an attempt to give a general overview of the current, and some of the foreseen, research and development of human-centred radiological software technologies at the Software Engineering department to meet with the need of improved radiological safety for not only nuclear industry but also other industries around the world. (author)

  1. Supporting Usability Engineering in Small Software Development Organizations

    DEFF Research Database (Denmark)

    Bornoe, Nis; Stage, Jan

    2013-01-01

    Despite an interest and use of different usability engineering methods small software development organizations find it challenging to implement usability engineering into the software development process. We present the results from a study about usability engineering in practice. Through a series...... of semistructured interviews we want to get an understanding of how usability is implemented into the organizations and how it’s practiced in reality. We found that the developers found it problematic to combine agile software development methods with classic usability engineering methods. A lack of solid usability...... engineering expertise and not least experience seems to be a main obstacle for a successful implementation of usability engineering into current software development practices. They are requesting methods and procedures that fit better with their current practices and strategies to implement usability...

  2. Supporting migration to services using software architecture reconstruction

    OpenAIRE

    O'Brien, Liam; Smith, Dennis; Lewis, Grace

    2005-01-01

    peer-reviewed There are many good reasons why organizations should perform software architecture reconstructions. However, few organizations are willing to pay for the effort. Software architecture reconstruction must be viewed not as an effort on its own but as a contribution in a broader technical context, such as the streamlining of products into a product line or the modernization of systems that hit their architectural borders, that is require major restructuring. In this paper we ...

  3. Grand Challenges in Clinical Decision Support v10

    Science.gov (United States)

    Sittig, Dean F.; Wright, Adam; Osheroff, Jerome A.; Middleton, Blackford; Teich, Jonathan M.; Ash, Joan S.; Campbell, Emily; Bates, David W.

    2008-01-01

    There is a pressing need for high-quality, effective means of designing, developing, presenting, implementing, evaluating, and maintaining all types of clinical decision support capabilities for clinicians, patients and consumers. Using an iterative, consensus-building process we identified a rank-ordered list of the top 10 grand challenges in clinical decision support. This list was created to educate and inspire researchers, developers, funders, and policy-makers. The list of challenges in order of importance that they be solved if patients and organizations are to begin realizing the fullest benefits possible of these systems consists of: Improve the human-computer interface; Disseminate best practices in CDS design, development, and implementation; Summarize patient-level information; Prioritize and filter recommendations to the user; Create an architecture for sharing executable CDS modules and services; Combine recommendations for patients with co-morbidities; Prioritize CDS content development and implementation; Create internet-accessible clinical decision support repositories; Use freetext information to drive clinical decision support; Mine large clinical databases to create new CDS. Identification of solutions to these challenges is critical if clinical decision support is to achieve its potential and improve the quality, safety and efficiency of healthcare. PMID:18029232

  4. IBM’s Health Analytics and Clinical Decision Support

    Science.gov (United States)

    Sun, J.; Knoop, S.; Shabo, A.; Carmeli, B.; Sow, D.; Syed-Mahmood, T.; Rapp, W.

    2014-01-01

    Summary Objectives This survey explores the role of big data and health analytics developed by IBM in supporting the transformation of healthcare by augmenting evidence-based decision-making. Methods Some problems in healthcare and strategies for change are described. It is argued that change requires better decisions, which, in turn, require better use of the many kinds of healthcare information. Analytic resources that address each of the information challenges are described. Examples of the role of each of the resources are given. Results There are powerful analytic tools that utilize the various kinds of big data in healthcare to help clinicians make more personalized, evidenced-based decisions. Such resources can extract relevant information and provide insights that clinicians can use to make evidence-supported decisions. There are early suggestions that these resources have clinical value. As with all analytic tools, they are limited by the amount and quality of data. Conclusion Big data is an inevitable part of the future of healthcare. There is a compelling need to manage and use big data to make better decisions to support the transformation of healthcare to the personalized, evidence-supported model of the future. Cognitive computing resources are necessary to manage the challenges in employing big data in healthcare. Such tools have been and are being developed. The analytic resources, themselves, do not drive, but support healthcare transformation. PMID:25123736

  5. Improving clinical decision support using data mining techniques

    Science.gov (United States)

    Burn-Thornton, Kath E.; Thorpe, Simon I.

    1999-02-01

    Physicians, in their ever-demanding jobs, are looking to decision support systems for aid in clinical diagnosis. However, clinical decision support systems need to be of sufficiently high accuracy that they help, rather than hinder, the physician in his/her diagnosis. Decision support systems with accuracies, of patient state determination, of greater than 80 percent, are generally perceived to be sufficiently accurate to fulfill the role of helping the physician. We have previously shown that data mining techniques have the potential to provide the underpinning technology for clinical decision support systems. In this paper, an extension of the work in reverence 2, we describe how changes in data mining methodologies, for the analysis of 12-lead ECG data, improve the accuracy by which data mining algorithms determine which patients are suffering from heart disease. We show that the accuracy of patient state prediction, for all the algorithms, which we investigated, can be increased by up to 6 percent, using the combination of appropriate test training ratios and 5-fold cross-validation. The use of cross-validation greater than 5-fold, appears to reduce the improvement in algorithm classification accuracy gained by the use of this validation method. The accuracy of 84 percent in patient state predictions, obtained using the algorithm OCI, suggests that this algorithm will be capable of providing the required accuracy for clinical decision support systems.

  6. Decision Support Systems: Usage And Applications In Logistics Services

    Directory of Open Access Journals (Sweden)

    Eyüp AKÇETİN

    2014-06-01

    Full Text Available Competitive advantage in logistics operations is possible by analyzing data to create information and turning that information into decision. Supply chain optimization depends on effective management of chain knowledge. Analyzing data from supply chain and making a decision creates complex operations. Therefore, these operations require benefitting from information technology. In today’s global world, businesses use outsourcing for logistics services to focus on their own field, so are seeking to achieve competitive advantage against competitors. Outsourcing requires sharing of various information and data with companies that provide logistical support. Effective strategies are based on well-analyzed the data and information. Best options for right decisions can be created only from good analysis. That’s why companies that supply logistics services achieve competitive advantage using decision support systems (DSS in industrial competition. In short, DSS has become driving force for every business in today’s knowledge-based economy.

  7. A decision support system for strategic planning on pig farms

    OpenAIRE

    Backus, Ge B.C.; Timmer, G. Th.; Dijkhuizen, A.A.; Eidman, V.R.; Vos, F.

    1995-01-01

    This paper reported on a decision support system (DSS) for strategic planning on pig farms. The DSS was based . on a stochastic simulation model of investment decisions (ISM). ISM described a farm with one loan and one building using 23 variables. The simulation model calculated the results of a strategic plan for an individual pig farm over a time horizon of a maximum of 20 years for a given scenario. For six distinct replacement strategies, regression metamodels were specified to describe t...

  8. New threats and new challenges for radiological decision support

    DEFF Research Database (Denmark)

    Andersson, Kasper Grann; Astrup, Poul; Mikkelsen, Torben

    2011-01-01

    It is described how ongoing work will extend European standard decision support systems currently integrated in the nuclear power plant preparedness in many countries, to enable estimation of the radiological consequences of atmospheric dispersion of contaminants following a terror attack in a city....... Factors relating to the contaminant release processes, dispersion, deposition and post deposition migration are discussed, and non-radiological issues are highlighted in relation to decision making....

  9. Relational Algebra in Spatial Decision Support Systems Ontologies.

    Science.gov (United States)

    Diomidous, Marianna; Chardalias, Kostis; Koutonias, Panagiotis; Magnita, Adrianna; Andrianopoulos, Charalampos; Zimeras, Stelios; Mechili, Enkeleint Aggelos

    2017-01-01

    Decision Support Systems (DSS) is a powerful tool, for facilitates researchers to choose the correct decision based on their final results. Especially in medical cases where doctors could use these systems, to overcome the problem with the clinical misunderstanding. Based on these systems, queries must be constructed based on the particular questions that doctors must answer. In this work, combination between questions and queries would be presented via relational algebra.

  10. Promoting Shared Decision Making in Disorders of Sex Development (DSD): Decision Aids and Support Tools.

    Science.gov (United States)

    Siminoff, L A; Sandberg, D E

    2015-05-01

    Specific complaints and grievances from adult patients with disorders of sex development (DSD), and their advocates center around the lack of information or misinformation they were given about their condition and feeling stigmatized and shamed by the secrecy surrounding their condition and its management. Many also attribute poor sexual function to damaging genital surgery and/or repeated, insensitive genital examinations. These reports suggest the need to reconsider the decision-making process for the treatment of children born with DSD. This paper proposes that shared decision making, an important concept in adult health care, be operationalized for the major decisions commonly encountered in DSD care and facilitated through the utilization of decision aids and support tools. This approach may help patients and their families make informed decisions that are better aligned with their personal values and goals. It may also lead to greater confidence in decision making with greater satisfaction and less regret. A brief review of the past and current approach to DSD decision making is provided, along with a review of shared decision making and decision aids and support tools. A case study explores the need and potential utility of this suggested new approach. © Georg Thieme Verlag KG Stuttgart · New York.

  11. Application of GIS in foreign direct investment decision support system

    Science.gov (United States)

    Zhou, Jianlan; Sun, Koumei

    2007-06-01

    It is important to make decisions on how to attract foreign direct investment (FDI) to China and know how the inequality of FDI introduction by locational different provinces. Following background descriptions on China's FDI economic environments and FDI-related policies, this paper demonstrates the uses of geographical information system (GIS) and multi-criterion decision-making (MCDM) framework in solving a spatial multi-objective problem of evaluating and ranking China's provinces for FDI introduction. It implements a foreign direct investment decision support system, which reveals the main determinants of FDI in China and gives some results of regional geographical analysis over spatial data.

  12. Development of a support software system for real-time HAL/S applications

    Science.gov (United States)

    Smith, R. S.

    1984-01-01

    Methodologies employed in defining and implementing a software support system for the HAL/S computer language for real-time operations on the Shuttle are detailed. Attention is also given to the management and validation techniques used during software development and software maintenance. Utilities developed to support the real-time operating conditions are described. With the support system being produced on Cyber computers and executable code then processed through Cyber or PDP machines, the support system has a production level status and can serve as a model for other software development projects.

  13. Decision Making Based On Management Information System and Decision Support System

    Directory of Open Access Journals (Sweden)

    Şükrü Ada

    2015-04-01

    Full Text Available Information hasbecome an essentialresource for managing modern organizations. This is so because today’sbusiness environment is volatile, dynamic, turbulent and necessitates the burgeoning demand for accurate, relevant, complete,timely and economical information needed to drive the decision-making process in order to accentuate organizational abilities to manage opportunities and threat. MIS work on online mode with an average processing speed. Generally, it is used by low level management. Decision support system are powerful tool that assist corporate executives, administrators and other senior officials in making decision regarding the problem. Management Information Systems is a useful tool that provided organized and summarized information in a proper time to decision makers and enable making accurate decision for managers in organizations. This paper will discuss the concept, characteristics, types of MIS, the MIS model, and in particular it will highlight the impact and role of MIS on decision making.

  14. Cognitive issues in autonomous spacecraft-control operations: An investigation of software-mediated decision making in a scaled environment

    Science.gov (United States)

    Murphy, Elizabeth Drummond

    As advances in technology are applied in complex, semi-automated domains, human controllers are distanced from the controlled process. This physical and psychological distance may both facilitate and degrade human performance. To investigate cognitive issues in spacecraft ground-control operations, the present experimental research was undertaken. The primary issue concerned the ability of operations analysts who do not monitor operations to make timely, accurate decisions when autonomous software calls for human help. Another key issue involved the potential effects of spatial-visualization ability (SVA) in environments that present data in graphical formats. Hypotheses were derived largely from previous findings and predictions in the literature. Undergraduate psychology students were assigned at random to a monitoring condition or an on-call condition in a scaled environment. The experimental task required subjects to decide on the veracity of a problem diagnosis delivered by a software process on-board a simulated spacecraft. To support decision-making, tabular and graphical data displays presented information on system status. A level of software confidence in the problem diagnosis was displayed, and subjects reported their own level of confidence in their decisions. Contrary to expectations, the performance of on-call subjects did not differ significantly from that of continuous monitors. Analysis yielded a significant interaction of sex and condition: Females in the on-call condition had the lowest mean accuracy. Results included a preference for bar charts over line graphs and faster performance with tables than with line graphs. A significant correlation was found between subjective confidence and decision accuracy. SVA was found to be predictive of accuracy but not speed; and SVA was found to be a stronger predictor of performance for males than for females. Low-SVA subjects reported that they relied more on software confidence than did medium- or high

  15. Development of RODOS (Real-Time, On-Line Decision Support System), a comprehensive decision support system for nuclear emergencies in Europe - an overview

    International Nuclear Information System (INIS)

    Ehrhardt, J.; Paesler-Sauer, J.; Schuele, O.

    1993-01-01

    Within its Radiation Protection Research Programme, the Commission of the European Communities has embarked on a major project aiming at the development of an integrated and comprehensive real-time on-line decision support system (RODOS) for nuclear emergencies in Europe, applicable for the vicinity of the release and the early phase up to far distant areas and the later stages of an accident. At present, the project is organised as a joint venture of some 18 European institutes closely cooperating with several Russian and Ukrainian laboratories. The main purpose of the project is to provide the methodological basis, develop models and data and install the hardware and software framework of RODOS. The paper describes the key features, the overall design and the software structure broadly accepted by the contractors. The paper sketches the present status of RODOS and gives an overview of the important tasks of R and D work for the next project phases. (author)

  16. Evolution of Decision Support Systems Research Field in Numbers

    Directory of Open Access Journals (Sweden)

    Ana-Maria SUDUC

    2010-01-01

    Full Text Available The scientific production in a certain field shows, in great extent, the research interests in that field. Decision Support Systems are a particular class of information systems which are gaining more popularity in various domains. In order to identify the evolution in time of the publications number, authors, subjects, publications in the Decision Support Systems (DSS field, and therefore the scientific world interest for this field, in November 2010 there have been organized a series of queries on three major international scientific databases: ScienceDirect, IEEE Xplore Digital Library and ACM Digital Library. The results presented in this paper shows that, even the decision support systems research field started in 1960s, the interests for this type of systems grew exponentially with each year in the last decades.

  17. System for selecting relevant information for decision support.

    Science.gov (United States)

    Kalina, Jan; Seidl, Libor; Zvára, Karel; Grünfeldová, Hana; Slovák, Dalibor; Zvárová, Jana

    2013-01-01

    We implemented a prototype of a decision support system called SIR which has a form of a web-based classification service for diagnostic decision support. The system has the ability to select the most relevant variables and to learn a classification rule, which is guaranteed to be suitable also for high-dimensional measurements. The classification system can be useful for clinicians in primary care to support their decision-making tasks with relevant information extracted from any available clinical study. The implemented prototype was tested on a sample of patients in a cardiological study and performs an information extraction from a high-dimensional set containing both clinical and gene expression data.

  18. Data Mining for Education Decision Support: A Review

    Directory of Open Access Journals (Sweden)

    Suhirman Suhirman

    2014-12-01

    Full Text Available Management of higher education must continue to evaluate on an ongoing basis in order to improve the quality of institutions. This will be able to do the necessary evaluation of various data, information, and knowledge of both internal and external institutions. They plan to use more efficiently the collected data, develop tools so that to collect and direct management information, in order to support managerial decision making. The collected data could be utilized to evaluate quality, perform analyses and diagnoses, evaluate dependability to the standards and practices of curricula and syllabi, and suggest alternatives in decision processes. Data minings to support decision making are well suited methods to provide decision support in the education environments, by generating and presenting relevant information and knowledge towards quality improvement of education processes. In educational domain, this information is very useful since it can be used as a base for investigating and enhancing the current educational standards and managements. In this paper, a review on data mining for academic decision support in education field is presented. The details of this paper will review on recent data mining in educational field and outlines future researches in educational data mining.

  19. A Decision Support System for Business Location Based on Open GIS Technology and Data

    Directory of Open Access Journals (Sweden)

    Cornel Ghita

    2014-06-01

    Full Text Available This article presents the architecture, features, and operating mode of a DSS (Decision Support System aiming to assist entrepreneurs and managers in the process of location decision making. The research assembled concepts derived from theory, findings of empirical studies, together with open GIS (Geographical Information System software and data, and modelled them into a DSS software tool, according to an original methodology and design. The users are guided step-by-step to input information on their businesses into the DSS (industry, preferences for land-use areas and facility types, weights of key location factors, and are returned two sets of results: one based on own options, and another one aggregate for the industry they operate in. The results consist in the top five locations for the user's firm, as well as for the industry, depicted both in a graphical report (map and a text report (explanation of results.

  20. Nurses' Clinical Decision Making on Adopting a Wound Clinical Decision Support System.

    Science.gov (United States)

    Khong, Peck Chui Betty; Hoi, Shu Yin; Holroyd, Eleanor; Wang, Wenru

    2015-07-01

    Healthcare information technology systems are considered the ideal tool to inculcate evidence-based nursing practices. The wound clinical decision support system was built locally to support nurses to manage pressure ulcer wounds in their daily practice. However, its adoption rate is not optimal. The study's objective was to discover the concepts that informed the RNs' decisions to adopt the wound clinical decision support system as an evidence-based technology in their nursing practice. This was an exploratory, descriptive, and qualitative design using face-to-face interviews, individual interviews, and active participatory observation. A purposive, theoretical sample of 14 RNs was recruited from one of the largest public tertiary hospitals in Singapore after obtaining ethics approval. After consenting, the nurses were interviewed and observed separately. Recruitment stopped when data saturation was reached. All transcribed interview data underwent a concurrent thematic analysis, whereas observational data were content analyzed independently and subsequently triangulated with the interview data. Eight emerging themes were identified, namely, use of the wound clinical decision support system, beliefs in the wound clinical decision support system, influences of the workplace culture, extent of the benefits, professional control over nursing practices, use of knowledge, gut feelings, and emotions (fear, doubt, and frustration). These themes represented the nurses' mental outlook as they made decisions on adopting the wound clinical decision support system in light of the complexities of their roles and workloads. This research has provided insight on the nurses' thoughts regarding their decision to interact with the computer environment in a Singapore context. It captured the nurses' complex thoughts when deciding whether to adopt or reject information technology as they practice in a clinical setting.

  1. Decision Support Systems for Research and Management in Advanced Life Support

    Science.gov (United States)

    Rodriquez, Luis F.

    2004-01-01

    Decision support systems have been implemented in many applications including strategic planning for battlefield scenarios, corporate decision making for business planning, production planning and control systems, and recommendation generators like those on Amazon.com(Registered TradeMark). Such tools are reviewed for developing a similar tool for NASA's ALS Program. DSS are considered concurrently with the development of the OPIS system, a database designed for chronicling of research and development in ALS. By utilizing the OPIS database, it is anticipated that decision support can be provided to increase the quality of decisions by ALS managers and researchers.

  2. In-field inspection support software: A status report on the Common Inspection On-site Software Package (CIOSP) project

    International Nuclear Information System (INIS)

    Novatchev, Dimitre; Titov, Pavel; Siradjov, Bakhtiiar; Vlad, Ioan; Xiao Jing

    2001-01-01

    Full text: IAEA has invested much thought and effort into developing software that can assist inspectors during their inspection work. Experience with such applications has been steadily growing and IAEA has recently commissioned a next-generation software package. This kind of software accommodates inspection tasks that can vary substantially in function depending on the type of installation being inspected as well as ensures that the resulting software package has a wide range of usability and can preclude excessive development of plant-specific applications. The Common Inspection On-site Software Package is being developed in the Department of Safeguards to address the limitations of the existing software and to expand its coverage of the inspection process. CIOSP is 'common' in that it is aimed at providing support for as many facilities as possible with the minimum re-configuration. At the same time it has to cater to varying needs of individual facilities, different instrumentation and verification methods used. A component-based approach was taken to successfully tackle the challenges that the development of this software presented. CIOSP consists of the following major components: A framework into which individual plug-ins supporting various inspection activities can integrate at run-time; A central data store containing all facility configuration data and all data collected during inspections; A local data store, which resides on the inspector's computer, where the current inspection's data is stored; A set of services used by all plug-ins (i.e. data transformation, authentication, replication services etc.). This architecture allows for incremental development and extension of the software with plug-ins that support individual inspection activities. The core set of components along with the framework, the Inventory Verification, Book Examination and Records and Reports Comparison plug-ins have been developed. The development of the Short Notice Random

  3. Fault-Tolerant Onboard Monitoring and Decision Support Systems

    DEFF Research Database (Denmark)

    Lajic, Zoran

    a crude and simple estimation of the actual sea state (Hs and Tz), information about the longitudinal hull girder loading, seakeeping performance of the ship, and decision support on how to operate the ship within acceptable limits. The system is able to identify critical forthcoming events and to give...... advice regarding speed and course changes to decrease the wave-induced loads. The SeaSense system is based on the combined use of a mathematical model and measurements from a set of sensors. The overall dependability of a shipboard monitoring and decision support system such as the SeaSense system can...

  4. Data warehouse based decision support system in nuclear power plants

    International Nuclear Information System (INIS)

    Nadinic, B.

    2004-01-01

    Safety is an important element in business decision making processes in nuclear power plants. Information about component reliability, structures and systems, data recorded during the nuclear power plant's operation and outage periods, as well as experiences from other power plants are located in different database systems throughout the power plant. It would be possible to create a decision support system which would collect data, transform it into a standardized form and store it in a single location in a format more suitable for analyses and knowledge discovery. This single location where the data would be stored would be a data warehouse. Such data warehouse based decision support system could help make decision making processes more efficient by providing more information about business processes and predicting possible consequences of different decisions. Two main functionalities in this decision support system would be an OLAP (On Line Analytical Processing) and a data mining system. An OLAP system would enable the users to perform fast, simple and efficient multidimensional analysis of existing data and identify trends. Data mining techniques and algorithms would help discover new, previously unknown information from the data as well as hidden dependencies between various parameters. Data mining would also enable analysts to create relevant prediction models that could predict behaviour of different systems during operation and inspection results during outages. The basic characteristics and theoretical foundations of such decision support system are described and the reasons for choosing a data warehouse as the underlying structure are explained. The article analyzes obvious business benefits of such system as well as potential uses of OLAP and data mining technologies. Possible implementation methodologies and problems that may arise, especially in the field of data integration, are discussed and analyzed.(author)

  5. Reference and PDF-manager software: complexities, support and workflow.

    Science.gov (United States)

    Mead, Thomas L; Berryman, Donna R

    2010-10-01

    In the past, librarians taught reference management by training library users to use established software programs such as RefWorks or EndNote. In today's environment, there is a proliferation of Web-based programs that are being used by library clientele that offer a new twist on the well-known reference management programs. Basically, these new programs are PDF-manager software (e.g., Mendeley or Papers). Librarians are faced with new questions, issues, and concerns, given the new workflows and pathways that these PDF-manager programs present. This article takes a look at some of those.

  6. The use of earth observation and decision support systems for the restoration of open-cast nickel mines in Evia, central Greece

    NARCIS (Netherlands)

    Ganas, A.; Aerts, J.C.J.H.; Astaras, T.; de Vente, J.; Frogoudakis, E.; Labrinos, N.

    2004-01-01

    We have developed a decision support system (DSS) for open mining areas which reflects and simulates the major decision steps of a mining expert (engineer, manager) during the formulation of a restoration plan. The software supports the mining expert to structure the various restoration alternatives

  7. Simulation-based decision support for evaluating operational plans

    Directory of Open Access Journals (Sweden)

    Johan Schubert

    2015-12-01

    Full Text Available In this article, we describe simulation-based decision support techniques for evaluation of operational plans within effects-based planning. Using a decision support tool, developers of operational plans are able to evaluate thousands of alternative plans against possible courses of events and decide which of these plans are capable of achieving a desired end state. The objective of this study is to examine the potential of a decision support system that helps operational analysts understand the consequences of numerous alternative plans through simulation and evaluation. Operational plans are described in the effects-based approach to operations concept as a set of actions and effects. For each action, we examine several different alternative ways to perform the action. We use a representation where a plan consists of several actions that should be performed. Each action may be performed in one of several different alternative ways. Together these action alternatives make up all possible plan instances, which are represented as a tree of action alternatives that may be searched for the most effective sequence of alternative actions. As a test case, we use an expeditionary operation with a plan of 43 actions and several alternatives for these actions, as well as a scenario of 40 group actors. Decision support for planners is provided by several methods that analyze the impact of a plan on the 40 actors, e.g., by visualizing time series of plan performance. Detailed decision support for finding the most influential actions of a plan is presented by using sensitivity analysis and regression tree analysis. Finally, a decision maker may use the tool to determine the boundaries of an operation that it must not move beyond without risk of drastic failure. The significant contribution of this study is the presentation of an integrated approach for evaluation of operational plans.

  8. Technology Infusion Challenges from a Decision Support Perspective

    Science.gov (United States)

    Adumitroaie, V.; Weisbin, C. R.

    2009-01-01

    In a restricted science budget environment and increasingly numerous required technology developments, the technology investment decisions within NASA are objectively more and more difficult to make such that the end results are satisfying the technical objectives and all the organizational constraints. Under these conditions it is rationally desirable to build an investment portfolio, which has the highest possible technology infusion rate. Arguably the path to infusion is subject to many influencing factors, but here only the challenges associated with the very initial stages are addressed: defining the needs and the subsequent investment decision-support process. It is conceivable that decision consistency and possibly its quality suffer when the decision-making process has limited or no traceability. This paper presents a structured decision-support framework aiming to provide traceable, auditable, infusion- driven recommendations towards a selection process in which these recommendations are used as reference points in further discussions among stakeholders. In this framework addressing well-defined requirements, different measures of success can be defined based on traceability to specific selection criteria. As a direct result, even by using simplified decision models the likelihood of infusion can be probed and consequently improved.

  9. Decision Support Model for Introduction of Gamification Solution Using AHP

    Science.gov (United States)

    2014-01-01

    Gamification means the use of various elements of game design in nongame contexts including workplace collaboration, marketing, education, military, and medical services. Gamification is effective for both improving workplace productivity and motivating employees. However, introduction of gamification is not easy because the planning and implementation processes of gamification are very complicated and it needs interdisciplinary knowledge such as information systems, organization behavior, and human psychology. Providing a systematic decision making method for gamification process is the purpose of this paper. This paper suggests the decision criteria for selection of gamification platform to support a systematic decision making process for managements. The criteria are derived from previous works on gamification, introduction of information systems, and analytic hierarchy process. The weights of decision criteria are calculated through a survey by the professionals on game, information systems, and business administration. The analytic hierarchy process is used to derive the weights. The decision criteria and weights provided in this paper could support the managements to make a systematic decision for selection of gamification platform. PMID:24892075

  10. Decision support model for introduction of gamification solution using AHP.

    Science.gov (United States)

    Kim, Sangkyun

    2014-01-01

    Gamification means the use of various elements of game design in nongame contexts including workplace collaboration, marketing, education, military, and medical services. Gamification is effective for both improving workplace productivity and motivating employees. However, introduction of gamification is not easy because the planning and implementation processes of gamification are very complicated and it needs interdisciplinary knowledge such as information systems, organization behavior, and human psychology. Providing a systematic decision making method for gamification process is the purpose of this paper. This paper suggests the decision criteria for selection of gamification platform to support a systematic decision making process for managements. The criteria are derived from previous works on gamification, introduction of information systems, and analytic hierarchy process. The weights of decision criteria are calculated through a survey by the professionals on game, information systems, and business administration. The analytic hierarchy process is used to derive the weights. The decision criteria and weights provided in this paper could support the managements to make a systematic decision for selection of gamification platform.

  11. Decision Support Model for Introduction of Gamification Solution Using AHP

    Directory of Open Access Journals (Sweden)

    Sangkyun Kim

    2014-01-01

    Full Text Available Gamification means the use of various elements of game design in nongame contexts including workplace collaboration, marketing, education, military, and medical services. Gamification is effective for both improving workplace productivity and motivating employees. However, introduction of gamification is not easy because the planning and implementation processes of gamification are very complicated and it needs interdisciplinary knowledge such as information systems, organization behavior, and human psychology. Providing a systematic decision making method for gamification process is the purpose of this paper. This paper suggests the decision criteria for selection of gamification platform to support a systematic decision making process for managements. The criteria are derived from previous works on gamification, introduction of information systems, and analytic hierarchy process. The weights of decision criteria are calculated through a survey by the professionals on game, information systems, and business administration. The analytic hierarchy process is used to derive the weights. The decision criteria and weights provided in this paper could support the managements to make a systematic decision for selection of gamification platform.

  12. An object-oriented approach to site characterization decision support

    International Nuclear Information System (INIS)

    Johnson, R.

    1995-01-01

    Effective decision support for site characterization is key to determining the nature and extent of contamination and the associated human and environmental risks. Site characterization data, however, present particular problems to technical analysts and decision-makers. Such data are four dimensional, incorporating temporal and spatial components. Their sheer volume can be daunting -- sites with hundreds of monitoring wells and thousands of samples sent for laboratory analyses are not uncommon. Data are derived from a variety of sources including laboratory analyses, non-intrusive geophysical surveys, historical information, bore logs, in-field estimates of key physical parameters such as aquifer transmissivity, soil moisture content, depth-to-water table, etc. Ultimately, decisions have to be made based on data that are always incomplete, often confusing, inaccurate, or inappropriate, and occasionally wrong. In response to this challenge, two approaches to environmental decision support have arisen, Data Quality Objectives (DQOS) and the Observational Approach (OA). DQOs establish criteria for data collection by clearly defining the decisions that need to be made, the uncertainty that can be tolerated, and the type and amount of data that needs to be collected to satisfy the uncertainty requirements. In practice, DQOs are typically based on statistical measures. The OA accepts the fact that the process of characterizing and remediating contaminated sites is always uncertain. Decision-making with the OA is based on what is known about a site, with contingencies developed for potential future deviations from the original assumptions about contamination nature, extent, and risks posed

  13. Support for Different Roles in Software Engineering Master's Thesis Projects

    Science.gov (United States)

    Host, M.; Feldt, R.; Luders, F.

    2010-01-01

    Like many engineering programs in Europe, the final part of most Swedish software engineering programs is a longer project in which the students write a Master's thesis. These projects are often conducted in cooperation between a university and industry, and the students often have two supervisors, one at the university and one in industry. In…

  14. The Astrophysics Source Code Library: Supporting software publication and citation

    Science.gov (United States)

    Allen, Alice; Teuben, Peter

    2018-01-01

    The Astrophysics Source Code Library (ASCL, ascl.net), established in 1999, is a free online registry for source codes used in research that has appeared in, or been submitted to, peer-reviewed publications. The ASCL is indexed by the SAO/NASA Astrophysics Data System (ADS) and Web of Science and is citable by using the unique ascl ID assigned to each code. In addition to registering codes, the ASCL can house archive files for download and assign them DOIs. The ASCL advocations for software citation on par with article citation, participates in multidiscipinary events such as Force11, OpenCon, and the annual Workshop on Sustainable Software for Science, works with journal publishers, and organizes Special Sessions and Birds of a Feather meetings at national and international conferences such as Astronomical Data Analysis Software and Systems (ADASS), European Week of Astronomy and Space Science, and AAS meetings. In this presentation, I will discuss some of the challenges of gathering credit for publishing software and ideas and efforts from other disciplines that may be useful to astronomy.

  15. SOCOM Training and Rehearsal System (STRS) Process Improvement and Decision Support System (DSS) Development

    National Research Council Canada - National Science Library

    Crossland, Neal; Broussard, Steve

    2005-01-01

    ...) Process Improvement and Decision Support System (DSS) Development. Discussion sequence is: Why the study? Objectives; Areas of inquiry; Study products; Observations; Recommendations; Decision Support System.

  16. Data Mining and Data Fusion for Enhanced Decision Support

    Energy Technology Data Exchange (ETDEWEB)

    Khan, Shiraj [ORNL; Ganguly, Auroop R [ORNL; Gupta, Amar [University of Arizona

    2008-01-01

    The process of Data Mining converts information to knowledge by utilizing tools from the disciplines of computational statistics, database technologies, machine learning, signal processing, nonlinear dynamics, process modeling, simulation, and allied disciplines. Data Mining allows business problems to be analyzed from diverse perspectives, including dimensionality reduction, correlation and co-occurrence, clustering and classification, regression and forecasting, anomaly detection, and change analysis. The predictive insights generated from Data Mining can be further utilized through real-time analysis and decision sciences, as well as through human-driven analysis based on management by exceptions or by objectives, to generate actionable knowledge. The tools that enable the transformation of raw data to actionable predictive insights are collectively referred as Decision Support tools. This chapter presents a new formalization of the decision process, leading to a new Decision Superiority model, partially motivated by the Joint Directors of Laboratories (JDL) Data Fusion Model. In addition, it examines the growing importance of Data Fusion concepts.

  17. Knowledge Management Technology for Decision Support: an empirical examination

    Directory of Open Access Journals (Sweden)

    Meliha Handzic

    2001-11-01

    Full Text Available This paper reports the results of an empirical examination of the effectiveness of one type of knowledge management technology, namely 'contextual knowledge repository', for supporting individual decision makers in a predictive judgement task context. 31 volunteer subjects participated in the study. The results indicate that a given technology was fairly useful, but insufficient to maximally enhance individual decision making. On one hand, subjects were found to extract more knowledge and make significantly smaller decision errors than their notional naive counterparts. On the other hand, subjects tended to extract less knowledge and make significantly larger decision errors compared to notional optimal counterparts. These findings suggest that individuals could potentially benefit from those knowledge management technologies that would provide additional explicit analytical and procedural knowledge, or those that would facilitate sharing of tacit knowledge through interaction with others. Future research is necessary to address these issues.

  18. ENABLING SMART MANUFACTURING TECHNOLOGIES FOR DECISION-MAKING SUPPORT

    Science.gov (United States)

    Helu, Moneer; Libes, Don; Lubell, Joshua; Lyons, Kevin; Morris, KC

    2017-01-01

    Smart manufacturing combines advanced manufacturing capabilities and digital technologies throughout the product lifecycle. These technologies can provide decision-making support to manufacturers through improved monitoring, analysis, modeling, and simulation that generate more and better intelligence about manufacturing systems. However, challenges and barriers have impeded the adoption of smart manufacturing technologies. To begin to address this need, this paper defines requirements for data-driven decision making in manufacturing based on a generalized description of decision making. Using these requirements, we then focus on identifying key barriers that prevent the development and use of data-driven decision making in industry as well as examples of technologies and standards that have the potential to overcome these barriers. The goal of this research is to promote a common understanding among the manufacturing community that can enable standardization efforts and innovation needed to continue adoption and use of smart manufacturing technologies. PMID:28649678

  19. Modular Architecture for Integrated Model-Based Decision Support.

    Science.gov (United States)

    Gaebel, Jan; Schreiber, Erik; Oeser, Alexander; Oeltze-Jafra, Steffen

    2018-01-01

    Model-based decision support systems promise to be a valuable addition to oncological treatments and the implementation of personalized therapies. For the integration and sharing of decision models, the involved systems must be able to communicate with each other. In this paper, we propose a modularized architecture of dedicated systems for the integration of probabilistic decision models into existing hospital environments. These systems interconnect via web services and provide model sharing and processing capabilities for clinical information systems. Along the lines of IHE integration profiles from other disciplines and the meaningful reuse of routinely recorded patient data, our approach aims for the seamless integration of decision models into hospital infrastructure and the physicians' daily work.

  20. Incorporating stand level risk management options into forest decision support systems

    Directory of Open Access Journals (Sweden)

    Kyle Eyvindson

    2018-01-01

    Full Text Available Aim of study: To examine methods of incorporating risk and uncertainty to stand level forest decisions. Area of study: A case study examines a small forest holding from Jönköping, Sweden. Material and methods: We incorporate empirically estimated uncertainty into the simulation through a Monte Carlo approach when simulating the forest stands for the next 100 years. For the iterations of the Monte Carlo approach, errors were incorporated into the input data which was simulated according to the Heureka decision support system. Both the Value at Risk and the Conditional Value at Risk of the net present value are evaluated for each simulated stand. Main results: Visual representation of the errors can be used to highlight which decision would be most beneficial dependent on the decision maker’s opinion of the forest inventory results. At a stand level, risk preferences can be rather easily incorporated into the current forest decision support software. Research highlights: Forest management operates under uncertainty and risk. Methods are available to describe this risk in an understandable fashion for the decision maker.

  1. Westinghouse corporate development of a decision software program for Radiological Evaluation Decision Input (REDI)

    International Nuclear Information System (INIS)

    Bush, T.S.

    1995-01-01

    In December 1992, the Department of Energy (DOE) implemented the DOE Radiological Control Manual (RCM). Westinghouse Idaho Nuclear Company, Inc. (WINCO) submitted an implementation plan showing how compliance with the manual would be achieved. This implementation plan was approved by DOE in November 1992. Although WINCO had already been working under a similar Westinghouse RCM, the DOE RCM brought some new and challenging requirements. One such requirement was that of having procedure writers and job planners create the radiological input in work control procedures. Until this time, that information was being provided by radiological engineering or a radiation safety representative. As a result of this requirement, Westinghouse developed the Radiological Evaluation Decision Input (REDI) program

  2. Westinghouse corporate development of a decision software program for Radiological Evaluation Decision Input (REDI)

    Energy Technology Data Exchange (ETDEWEB)

    Bush, T.S. [Westinghosue Idaho Nuclear Co., Inc., Idaho Falls, ID (United States)

    1995-03-01

    In December 1992, the Department of Energy (DOE) implemented the DOE Radiological Control Manual (RCM). Westinghouse Idaho Nuclear Company, Inc. (WINCO) submitted an implementation plan showing how compliance with the manual would be achieved. This implementation plan was approved by DOE in November 1992. Although WINCO had already been working under a similar Westinghouse RCM, the DOE RCM brought some new and challenging requirements. One such requirement was that of having procedure writers and job planners create the radiological input in work control procedures. Until this time, that information was being provided by radiological engineering or a radiation safety representative. As a result of this requirement, Westinghouse developed the Radiological Evaluation Decision Input (REDI) program.

  3. Decision Support Systems and the Conflict Model of Decision Making: A Stimulus for New Computer-Assisted Careers Guidance Systems.

    Science.gov (United States)

    Ballantine, R. Malcolm

    Decision Support Systems (DSSs) are computer-based decision aids to use when making decisions which are partially amenable to rational decision-making procedures but contain elements where intuitive judgment is an essential component. In such situations, DSSs are used to improve the quality of decision-making. The DSS approach is based on Simon's…

  4. Decision Support for Flood Event Prediction and Monitoring

    DEFF Research Database (Denmark)

    Mioc, Darka; Anton, François; Liang, Gengsheng

    2007-01-01

    In this paper the development of Web GIS based decision support system for flood events is presented. To improve flood prediction we developed the decision support system for flood prediction and monitoring that integrates hydrological modelling and CARIS GIS. We present the methodology for data...... integration, floodplain delineation, and online map interfaces. Our Web-based GIS model can dynamically display observed and predicted flood extents for decision makers and the general public. The users can access Web-based GIS that models current flood events and displays satellite imagery and digital...... elevation model integrated with flood plain area. The system can show how the flooding prediction based on the output from hydrological modeling for the next 48 hours along the lower Saint John River Valley....

  5. Confronting Uncertainty in Life Cycle Assessment Used for Decision Support

    DEFF Research Database (Denmark)

    Herrmann, Ivan Tengbjerg; Hauschild, Michael Zwicky; Sohn, Michael D.

    2014-01-01

    the decision maker (DM) in making the best possible choice for the environment. At present, some DMs do not trust the LCA to be a reliable decisionsupport tool—often because DMs consider the uncertainty of an LCA to be too large. The standard evaluation of uncertainty in LCAs is an ex-post approach that can...... regarding which type of LCA study to employ for the decision context at hand. This taxonomy enables the derivation of an LCA classification matrix to clearly identify and communicate the type of a given LCA. By relating the LCA classification matrix to statistical principles, we can also rank the different......The aim of this article is to help confront uncertainty in life cycle assessments (LCAs) used for decision support. LCAs offer a quantitative approach to assess environmental effects of products, technologies, and services and are conducted by an LCA practitioner or analyst (AN) to support...

  6. Green Decision Making: How Systemic Planning can support Strategic Decision Making for Sustainable Transport Development

    DEFF Research Database (Denmark)

    Leleur, Steen

    for Strategic Management. The book was published in 2012 by Springer-Verlag, London, as a research monograph in the publisher’s series about Decision Engineering. The intention behind this new book – with its focus upon ‘greening’ of strategic decisions – is to provide a general and less technical description......The book is based on my participation in the SUSTAIN research project 2012-2017 about National Sustainable Transport Planning funded by the Danish Research Council (Innovationsfonden). Many of the issues treated here have a backdrop in my book Complex Strategic Choices – Applying Systemic Planning...... to this application area. In fact a company relocation decision case has been used to introduce the potential of SP as regards providing decision support for strategic decision making. A main concern in this presentation of SP, which deviates from the Springer book referred to above, is to highlight that ‘greening...

  7. Behavior-aware decision support systems : LDRD final report.

    Energy Technology Data Exchange (ETDEWEB)

    Hirsch, Gary B.; Homer, Jack (Homer Consulting); Chenoweth, Brooke N.; Backus, George A.; Strip, David R.

    2007-11-01

    As Sandia National Laboratories serves its mission to provide support for the security-related interests of the United States, it is faced with considering the behavioral responses that drive problems, mitigate interventions, or lead to unintended consequences. The effort described here expands earlier works in using healthcare simulation to develop behavior-aware decision support systems. This report focuses on using qualitative choice techniques and enhancing two analysis models developed in a sister project.

  8. Supporting risk-informed decisions during business process execution

    NARCIS (Netherlands)

    Conforti, R.; Leoni, de M.; La Rosa, M.; Aalst, van der W.M.P.; Salinesi, C.; Norrie, M.C.; Pastor, O.

    2013-01-01

    This paper proposes a technique that supports process participants in making risk-informed decisions, with the aim to reduce the process risks. Risk reduction involves decreasing the likelihood and severity of a process fault from occurring. Given a process exposed to risks, e.g. a financial process

  9. Safety analysis in support of regulatory decision marking

    International Nuclear Information System (INIS)

    Pomier Baez, L.; Troncoso Fleitas, M.; Valhuerdi Debesa, C.; Valle Cepero, R.; Hernandez, J.L.

    1996-01-01

    Features of different safety analysis techniques by means of calculation thermohydraulic a probabilistic and severe accidents used in the safety assessment, as well as the development of these techniques in Cuba and their use in support of regulatory decision making are presented

  10. A Decision Support System for Predicting Students' Performance

    Science.gov (United States)

    Livieris, Ioannis E.; Mikropoulos, Tassos A.; Pintelas, Panagiotis

    2016-01-01

    Educational data mining is an emerging research field concerned with developing methods for exploring the unique types of data that come from educational context. These data allow the educational stakeholders to discover new, interesting and valuable knowledge about students. In this paper, we present a new user-friendly decision support tool for…

  11. Making Risk Models Operational for Situational Awareness and Decision Support

    International Nuclear Information System (INIS)

    Paulson, P.R.; Coles, G.; Shoemaker, S.

    2012-01-01

    We present CARIM, a decision support tool to aid in the evaluation of plans for converting control systems to digital instruments. The model provides the capability to optimize planning and resource allocation to reduce risk from multiple safety and economic perspectives. (author)

  12. Decision support for sustainable forestry: enhancing the basic rational model.

    Science.gov (United States)

    H.R. Ekbia; K.M. Reynolds

    2007-01-01

    Decision-support systems (DSS) have been extensively used in the management of natural resources for nearly two decades. However, practical difficulties with the application of DSS in real-world situations have become increasingly apparent. Complexities of decisionmaking, encountered in the context of ecosystem management, are equally present in sustainable forestry....

  13. Revisiting the dose calculation methodologies in European decision support systems

    DEFF Research Database (Denmark)

    Andersson, Kasper Grann; Roos, Per; Hou, Xiaolin

    2012-01-01

    The paper presents examples of current needs for improvement and extended applicability of the European decision support systems. The systems were originally created for prediction of the radiological consequences of accidents at nuclear installations. They could however also be of great value in...... for, to introduce new knowledge and thereby improve prognoses....

  14. A decision support system for firebase location in a nature ...

    African Journals Online (AJOL)

    2017-04-19

    Apr 19, 2017 ... implemented in the form of a computerised decision support system ... seven Department of Water Affairs and Forestry reserves (spanning an area of 118km2), ... and the solution methodology of §4 are then incorporated into a ...

  15. Real time traffic models, decision support for traffic management

    NARCIS (Netherlands)

    Wismans, Luc Johannes Josephus; de Romph, E.; Friso, K.; Zantema, K.

    2014-01-01

    Reliable and accurate short-term traffic state prediction can improve the performance of real-time traffic management systems significantly. Using this short-time prediction based on current measurements delivered by advanced surveillance systems will support decision-making processes on various

  16. Real Time Traffic Models, Decision Support for Traffic Management

    NARCIS (Netherlands)

    Wismans, L.; De Romph, E.; Friso, K.; Zantema, K.

    2014-01-01

    Reliable and accurate short-term traffic state prediction can improve the performance of real-time traffic management systems significantly. Using this short-time prediction based on current measurements delivered by advanced surveillance systems will support decision-making processes on various

  17. Threat evaluation and weapon assignment decision support: A ...

    African Journals Online (AJOL)

    ... stands within the context of a ground based air defence system (GBADS) at the turn of the twenty first century. However, much of the contents of the paper maye generalized to military environments other than a GBADS one. Keywords: Threat evaluation, weapon assignment, decision support. ORiON Vol. 23 (2) 2007: pp.

  18. DECISION SUPPORT TOOL FOR RETAIL SHELF SPACE OPTIMIZATION

    OpenAIRE

    B. RAMASESHAN; N. R. ACHUTHAN; R. COLLINSON

    2008-01-01

    Efficient allocation of shelf space and product assortment can significantly improve a retailer's profitability. This paper addresses the problem from the perspective of an independent franchise retailer. A Category Management Decision Support Tool (CMDST) is proposed that efficiently generates optimal shelf space allocations and product assortments by using the existing scarce resources, resulting in increased profitability. CMDST utilizes two practical integrated category management models ...

  19. Data assimilation in the decision support system RODOS

    DEFF Research Database (Denmark)

    Rojas-Palma, C.; Madsen, H.; Gering, F.

    2003-01-01

    . The process of combining model predictions and observations, usually referred to as data assimilation, is described in this article within the framework of the real time on-line decision support system (RODOS) for off-site nuclear emergency management in Europe. Data assimilation capabilities, based on Kalman...

  20. A strategic decision support system for logistics and supply chain ...

    Indian Academy of Sciences (India)

    T Biswas

    strategic decision support model in achieving better utilization of network and resources to fulfil the ... demand is demonstrated using illustrative scenarios inspired from the real case of a logistics company. ... performance, because they determine the supply chain ..... to accurately measure the desirability of the features.

  1. Decision support for natural resource management; models and evaluation methods

    NARCIS (Netherlands)

    Wessels, J.; Makowski, M.; Nakayama, H.

    2001-01-01

    When managing natural resources or agrobusinesses, one always has to deal with autonomous processes. These autonomous processes play a core role in designing model-based decision support systems. This chapter tries to give insight into the question of which types of models might be used in which

  2. The impact of an electronic clinical decision support for pulmonary ...

    African Journals Online (AJOL)

    State-of-the-art electronic radiology workflow can provide clinical decision support (CDS) for specialised imaging requests, but there has been limited work on the clinical impact of CDS in PE, particularly in resource-constrained environments. Objective. To determine the impact of an electronic CDS for PE on the efficiency ...

  3. A Decision Support System for Ship Maintenance Capacity Planning

    NARCIS (Netherlands)

    de Boer, R.; Schutten, Johannes M.J.; Zijm, Willem H.M.

    1997-01-01

    In this paper, the basic framework and algorithms of a decision support system are discussed, which enhance process and capacity planning at a large repair shop. The research is strongly motivated by experiences in a project carried out at a dockyard, which performs repair, overhaul and modification

  4. Computer Supported Decision Making in Therapy of Arterial Hypertension

    Czech Academy of Sciences Publication Activity Database

    Peleška, Jan; Švejda, David; Zvárová, Jana

    1997-01-01

    Roč. 45, 1/2 (1997), s. 25-29 ISSN 1386-5056 R&D Projects: GA ČR GA313/93/0616 Grant - others:COPERNICUS(XE) JRP-10053 Keywords : computer supported decision making * microsoft access language * therapy of arterial hypertension

  5. Decision support for dynamic greenhouse climate control strategies

    NARCIS (Netherlands)

    Körner, O.; Straten, van G.

    2008-01-01

    Earlier, different dynamic greenhouse climate regimes were designed with various aims as energy saving, biocide reduction or reduction of chemical growth retardants that are used for quality improvement. The aim of this research was to create a decision support tool in order to decide at which week

  6. ADDIS: A decision support system for evidence-based medicine

    NARCIS (Netherlands)

    G. van Valkenhoef (Gert); T. Tervonen (Tommi); T. Zwinkels (Tijs); B. de Brock (Bert); H.L. Hillege (Hans)

    2013-01-01

    textabstractClinical trials are the main source of information for the efficacy and safety evaluation of medical treatments. Although they are of pivotal importance in evidence-based medicine, there is a lack of usable information systems providing data-analysis and decision support capabilities for

  7. An operational decision support framework for monitoring business constraints

    NARCIS (Netherlands)

    Maggi, F.M.; Montali, M.; Aalst, van der W.M.P.; Lara, de J.; Zisman, A.

    2012-01-01

    Only recently, process mining techniques emerged that can be used for Operational decision Support (OS), i.e., knowledge extracted from event logs is used to handle running process instances better. In the process mining tool ProM, a generic OS service has been developed that allows ProM to

  8. Model based decision support for planning of road maintenance

    NARCIS (Netherlands)

    van Harten, Aart; Worm, J.M.; Worm, J.M.

    1996-01-01

    In this article we describe a Decision Support Model, based on Operational Research methods, for the multi-period planning of maintenance of bituminous pavements. This model is a tool for the road manager to assist in generating an optimal maintenance plan for a road. Optimal means: minimising the

  9. The value of participatory development to support antimicrobial stewardship with a clinical decision support system

    NARCIS (Netherlands)

    Beerlage-de Jong, Nienke; Wentzel, Jobke; Hendrix, Ron; van Gemert-Pijnen, Lisette

    2017-01-01

    Background: Current clinical decision support systems (CDSSs) for antimicrobial stewardship programs (ASPs) are guideline- or expert-driven. They are focused on (clinical) content, not on supporting real-time workflow. Thus, CDSSs fail to optimally support prudent antimicrobial prescribing in daily

  10. The value of participatory development to support antimicrobial stewardship with a clinical decision support system

    NARCIS (Netherlands)

    Beerlage-de Jong, Nienke; Wentzel, M.J.; Hendrix, Ron; van Gemert-Pijnen, Julia E.W.C.

    Background Current clinical decision support systems (CDSSs) for antimicrobial stewardship programs (ASPs) are guideline- or expert-driven. They are focused on (clinical) content, not on supporting real-time workflow. Thus, CDSSs fail to optimally support prudent antimicrobial prescribing in daily

  11. Decision support system for containment and release management

    Energy Technology Data Exchange (ETDEWEB)

    Oosterhuis, B [Twente Univ., Enschede (Netherlands). Computer Science Dept.

    1995-09-01

    The Containment and Release Management project was carried out within the Reinforced Concerted Action Programme for Accident Management Support and partly financed by the European Union. In this report a prototype of an accident management support system is presented. The support system integrates several concepts from accident management research, like safety objective trees, severe accident phenomena, calculation models and an emergency response data system. These concepts are provided by the prototype in such a way that the decision making process of accident management is supported. The prototype application is demonstrated by process data taken from a severe accident scenario for a pressurized water reactor (PWR) that was simulated with the thermohydraulic computer program MAAP. The prototype was derived from a decision support framework based on a decision theory. For established and innovative concepts from accident management research it is pointed out in which way these concepts can support accident management and how these concepts can be integrated. This approach is generic in two ways; it applies to both pressurized and boiling water reactors and it applies to both in vessel management and containment and release management. The prototype application was developed in Multimedia Toolbox 3.0 and requires at least a 386 PC with 4 MB memory, 6 MB free disk space and MS Windows 3.1. (orig.).

  12. Decision support system for containment and release management

    International Nuclear Information System (INIS)

    Oosterhuis, B.

    1995-09-01

    The Containment and Release Management project was carried out within the Reinforced Concerted Action Programme for Accident Management Support and partly financed by the European Union. In this report a prototype of an accident management support system is presented. The support system integrates several concepts from accident management research, like safety objective trees, severe accident phenomena, calculation models and an emergency response data system. These concepts are provided by the prototype in such a way that the decision making process of accident management is supported. The prototype application is demonstrated by process data taken from a severe accident scenario for a pressurized water reactor (PWR) that was simulated with the thermohydraulic computer program MAAP. The prototype was derived from a decision support framework based on a decision theory. For established and innovative concepts from accident management research it is pointed out in which way these concepts can support accident management and how these concepts can be integrated. This approach is generic in two ways; it applies to both pressurized and boiling water reactors and it applies to both in vessel management and containment and release management. The prototype application was developed in Multimedia Toolbox 3.0 and requires at least a 386 PC with 4 MB memory, 6 MB free disk space and MS Windows 3.1. (orig.)

  13. Effective Team Support: From Task and Cognitive Modeling to Software Agents for Time-Critical Complex Work Environments

    Science.gov (United States)

    Remington, Roger W. (Technical Monitor); John, Bonnie E.; Sycara, Katia

    2005-01-01

    The purpose of this research contract was to perform multidisciplinary research between CMU psychologists, computer scientists and NASA researchers to design a next generation collaborative system to support a team of human experts and intelligent agents. To achieve robust performance enhancement of such a system, we had proposed to perform task and cognitive modeling to thoroughly understand the impact technology makes on the organization and on key individual personnel. Guided by cognitively-inspired requirements, we would then develop software agents that support the human team in decision making, information filtering, information distribution and integration to enhance team situational awareness. During the period covered by this final report, we made substantial progress in completing a system for empirical data collection, cognitive modeling, and the building of software agents to support a team's tasks, and in running experiments for the collection of baseline data.

  14. Computerised decision support systems for healthcare professionals: an interpretative review

    Directory of Open Access Journals (Sweden)

    Kathrin Cresswell

    2013-03-01

    Full Text Available Purpose Computerised decision support systems are designed to support clinicians in making decisions and thereby enhance the quality and safety of care. We aimed to undertake an interpretative review of the empirical evidence on computerised decision support systems, their contexts of use, and summarise evidence on the effectiveness of these tools and insights into how these can be successfully implemented and adopted.Methods We systematically searched the empirical literature to identify systematic literature reviews on computerised decision support applications and their impact on the quality and safety of healthcare delivery over a 13-year period (1997–2010. The databases searched included: MEDLINE, EMBASE, The Cochrane Database of Systematic Reviews, Database of Abstracts of Reviews of Effects, The Cochrane Central Register of Controlled Trials, The Cochrane Methodology Register, The Health Technology Assessment Database, and The National Health Service (NHS Economic Evaluation Database. To be eligible for inclusion, systematic reviews needed to address computerised decision support systems, and at least one of the following: impact on safety; quality; or organisational, implementation or adoption considerations.Results Our searches yielded 121 systematic reviews relating to eHealth, of which we identified 41 as investigating computerised decision support systems. These indicated that, whilst there was a lack of investigating potential risks, such tools can result in improvements in practitioner performance in the promotion of preventive care and guideline adherence, particularly if specific information is available in real time and systems are effectively integrated into clinical workflows. However, the evidence regarding impact on patient outcomes was less clear-cut with reviews finding either no, inconsistent or modest benefits.Conclusions Whilst the potential of clinical decision support systems in improving, in particular

  15. SLAC FASTBUS Snoop Module: test results and support software

    International Nuclear Information System (INIS)

    Gustavson, D.B.; Walz, H.V.

    1985-09-01

    The development of a diagnostic module for FASTBUS has been completed. The Snoop Module is designed to reside on a Crate Segment and provide high-speed diagnostic monitoring and testing capabilities. Final hardware details and testing of production prototype modules are reported. Features of software under development for a stand-alone single Snoop diagnostic system and Multi-Snoop networks will be discussed. 3 refs., 2 figs

  16. Tolkku - a toolbox for decision support from condition monitoring data

    International Nuclear Information System (INIS)

    Saarela, Olli; Lehtonen, Mikko; Halme, Jari; Aikala, Antti; Raivio, Kimmo

    2012-01-01

    This paper describes a software toolbox (a software library) designed for condition monitoring and diagnosis of machines. This toolbox implements both new methods and prior art and is aimed for practical down-to-earth data analysis work. The target is to improve knowledge of the operation and behaviour of machines and processes throughout their entire life-cycles. The toolbox supports different phases of condition based maintenance with tools that extract essential information and automate data processing. The paper discusses principles that have guided toolbox design and the implemented toolbox structure. Case examples are used to illustrate how condition monitoring applications can be built using the toolbox. In the first case study the toolbox is applied to fault detection of industrial centrifuges based on measured electrical current. The second case study outlines an application for centralized monitoring of a fleet of machines that supports organizational learning.

  17. Electricity, health and the environment: Comparative assessment in support of decision making. Proceedings of a symposium

    International Nuclear Information System (INIS)

    1996-01-01

    The main objective of the Symposium was to enhance and strengthen information sharing and co-operation between interested and affected parties in the field of electricity demand analysis and supply planning, aiming at implementing sustainable policies in the power sector, taking into account economic, social, health and environmental aspects. To meet this objective, the Symposium sessions addressed the following topics: key issues in the decision making process; assessment of health and environmental impacts; integrated framework for comparative assessment; implementation of comparative assessment; country case studies; and comparative assessment in decision making. A closing round table focused on challenges for international co-operation aiming at implementation of sustainable electricity policies. In addition to the main sessions, poster presentations illustrated results from comparative assessment studies carried out in different countries, and software demonstration provided opportunities for participants to gain information about state of the art computer tools, databases and analytical models that are available for use in decision support studies. Refs, figs, tabs

  18. IDAS, software support for mathematical models and map-based graphics

    International Nuclear Information System (INIS)

    Birnbaum, M.D.; Wecker, D.B.

    1984-01-01

    IDAS (Intermediate Dose Assessment System) was developed for the U.S. Nuclear Regulatory Commission as a hardware/software host for radiological models and display of map-based plume graphics at the Operations Center (HQ), regional incident response centers, and site emergency facilities. IDAS design goals acknowledged the likelihood of future changes in the suite of models and the composition of map features for analysis and graphical display. IDAS provides a generalized software support environment to programmers and users of modeling programs. A database manager process provides multi-user access control to all input and output data for modeling programs. A programmer-created data description file (schema) specifies data field names, data types, legal and recommended ranges, default values, preferred units of measurement, and ''help'' text. Subroutine calls to IDAS from a model program invoke a consistent user interface which can show any of the schema contents, convert units of measurement, and route data to multiple logical devices, including the database. A stand-alone data editor allows the user to read and write model data records without execution of a model. IDAS stores digitized map features in a 4-level naming hierarchy. A user can select the map icon, color, and whether to show a stored name tag, for each map feature. The user also selects image scale (zoom) within limits set by map digitization. The resulting image combines static map information, computed analytic modeling results, and the user's feature selections for display to decision-makers

  19. Nuclear Waste Management Decision-Making Support with MCDA

    Directory of Open Access Journals (Sweden)

    A. Schwenk-Ferrero

    2017-01-01

    Full Text Available The paper proposes a multicriteria decision analysis (MCDA framework for a comparative evaluation of nuclear waste management strategies taking into account different local perspectives (expert and stakeholder opinions. Of note, a novel approach is taken using a multiple-criteria formulation that is methodologically adapted to tackle various conflicting criteria and a large number of expert/stakeholder groups involved in the decision-making process. The purpose is to develop a framework and to show its application to qualitative comparison and ranking of options in a hypothetical case of three waste management alternatives: interim storage at and/or away from the reactor site for the next 100 years, interim decay storage followed in midterm by disposal in a national repository, and disposal in a multinational repository. Additionally, major aspects of a decision-making aid are identified and discussed in separate paper sections dedicated to application context, decision supporting process, in particular problem structuring, objective hierarchy, performance evaluation modeling, sensitivity/robustness analyses, and interpretation of results (practical impact. The aim of the paper is to demonstrate the application of the MCDA framework developed to a generic hypothetical case and indicate how MCDA could support a decision on nuclear waste management policies in a “small” newcomer country embarking on nuclear technology in the future.

  20. Business Rules Definition for Decision Support System Using Matrix Grammar

    Directory of Open Access Journals (Sweden)

    Eva Zámečníková

    2016-06-01

    Full Text Available This paper deals with formalization of business rules by formal grammars. In our work we focus on methods for high frequency data processing. We process data by using complex event platforms (CEP which allow to process high volume of data in nearly real time. Decision making process is contained by one level of processing of CEP. Business rules are used for decision making process description. For the business rules formalization we chose matrix grammar. The use of formal grammars is quite natural as the structure of rules and its rewriting is very similar both for the business rules and for formal grammar. In addition the matrix grammar allows to simulate dependencies and correlations between the rules. The result of this work is a model for data processing of knowledge-based decision support system described by the rules of formal grammar. This system will support the decision making in CEP. This solution may contribute to the speedup of decision making process in complex event processing and also to the formal verification of these systems.

  1. Supporting End of Life Decision Making: Case Studies of Relational Closeness in Supported Decision Making for People with Severe or Profound Intellectual Disability

    Science.gov (United States)

    Watson, Joanne; Wilson, Erin; Hagiliassis, Nick

    2017-01-01

    Background: The United Nations Convention on the Rights of Persons with Disabilities (UNCRPD) promotes the use of supported decision making in lieu of substitute decision making. To date, there has been a lack of focus on supported decision making for people with severe or profound intellectual disability, including for end of life decisions.…

  2. Negotiation and Decision Making with Collaborative Software: How MarineMap 'Changed the Game' in California's Marine Life Protected Act Initiative.

    Science.gov (United States)

    Cravens, Amanda E

    2016-02-01

    Environmental managers and planners have become increasingly enthusiastic about the potential of decision support tools (DSTs) to improve environmental decision-making processes as information technology transforms many aspects of daily life. Discussions about DSTs, however, rarely recognize the range of ways software can influence users' negotiation, problem-solving, or decision-making strategies and incentives, in part because there are few empirical studies of completed processes that used technology. This mixed-methods study-which draws on data from approximately 60 semi-structured interviews and an online survey--examines how one geospatial DST influenced participants' experiences during a multi-year marine planning process in California. Results suggest that DSTs can facilitate communication by creating a common language, help users understand the geography and scientific criteria in play during the process, aid stakeholders in identifying shared or diverging interests, and facilitate joint problem solving. The same design features that enabled the tool to aid in decision making, however, also presented surprising challenges in certain circumstances by, for example, making it difficult for participants to discuss information that was not spatially represented on the map-based interface. The study also highlights the importance of the social context in which software is developed and implemented, suggesting that the relationship between the software development team and other participants may be as important as technical software design in shaping how DSTs add value. The paper concludes with considerations to inform the future use of DSTs in environmental decision-making processes.

  3. Negotiation and Decision Making with Collaborative Software: How MarineMap `Changed the Game' in California's Marine Life Protected Act Initiative

    Science.gov (United States)

    Cravens, Amanda E.

    2016-02-01

    Environmental managers and planners have become increasingly enthusiastic about the potential of decision support tools (DSTs) to improve environmental decision-making processes as information technology transforms many aspects of daily life. Discussions about DSTs, however, rarely recognize the range of ways software can influence users' negotiation, problem-solving, or decision-making strategies and incentives, in part because there are few empirical studies of completed processes that used technology. This mixed-methods study—which draws on data from approximately 60 semi-structured interviews and an online survey—examines how one geospatial DST influenced participants' experiences during a multi-year marine planning process in California. Results suggest that DSTs can facilitate communication by creating a common language, help users understand the geography and scientific criteria in play during the process, aid stakeholders in identifying shared or diverging interests, and facilitate joint problem solving. The same design features that enabled the tool to aid in decision making, however, also presented surprising challenges in certain circumstances by, for example, making it difficult for participants to discuss information that was not spatially represented on the map-based interface. The study also highlights the importance of the social context in which software is developed and implemented, suggesting that the relationship between the software development team and other participants may be as important as technical software design in shaping how DSTs add value. The paper concludes with considerations to inform the future use of DSTs in environmental decision-making processes.

  4. Design document for landfill capping Prototype Decision Support System

    International Nuclear Information System (INIS)

    Stone, J.J.; Paige, G.; Hakonson, T.E.; Lane, L.J.

    1994-01-01

    The overall objective of the Prototype Decision Support System for shallow land burial project is to ''Develop a Decision Support System tool which incorporates simulation modeling and multi-objective decision theory for the purpose of designing and evaluating alternative trench cap designs for mixed waste landfill covers. The goal is to improve the quality of technical information used by the risk manager to select landfill cover designs while taking into account technological, economical, and regulatory factors.'' The complexity of the technical and non-technical information, and how the information varies in importance across sites, points to the need for decision analysis tools that provide a common basis for integrating, synthesizing, and valuing the decision input. Because the cost of remediating thousands of contaminated DOE sites is projected to be in the 10's--100's of billions of dollars, methods will be needed to establish cleanup priorities and to help in the selection and evaluation of cost effective remediation alternatives. Even at this early stage in DOE's cleanup program, it is certain that capping technologies will be heavily relied upon to remediate the 3000+ landfills on DOE property. Capping is favored in remediating most DOE landfills because, based on preliminary baseline risk assessments, human and ecological risks are considered to be low at most of these sites and the regulatory requirements for final closure of old landfills can be met using a well designed cap to isolate the buried waste. This report describes a program plan to design, develop, and test a decision support system (DSS) for assisting the DOE risk manager in evaluating capping alternatives for radioactive and hazardous waste landfills. The DOE DSS will incorporate methods for calculating, integrating and valuing technical, regulatory, and economic criteria

  5. Food chain data customization for decision support systems in Austria

    Energy Technology Data Exchange (ETDEWEB)

    Gert, Sdouz; Manfred, Pachole [ARC Seibersdorf research, Seibersdorf (Austria)

    2006-07-01

    In the case of a nuclear accident in Europe the integral decision support system R.O.D.O.S. ( real-time on-line decision support system for off-site emergency management) supplies comprehensive information on the present and future radiological situation, and the consequences of measures to protect the population. These data comprise mainly map information such as population distribution, rivers, roads, vegetation areas and production data of various food products. This work concentrates on the customization of the data for the food chain and dose module for terrestrial pathways. During the last fifteen years two different codes have been used in Austria for support during accidents with radioactive releases: O.E.C.O.S.Y.S. and R.O.D.O.S.. Adaptations and improvements have been performed to give better tools, they are detailed in this paper. (N.C.)

  6. Food chain data customization for decision support systems in Austria

    International Nuclear Information System (INIS)

    Gert, Sdouz; Manfred, Pachole

    2006-01-01

    In the case of a nuclear accident in Europe the integral decision support system R.O.D.O.S. ( real-time on-line decision support system for off-site emergency management) supplies comprehensive information on the present and future radiological situation, and the consequences of measures to protect the population. These data comprise mainly map information such as population distribution, rivers, roads, vegetation areas and production data of various food products. This work concentrates on the customization of the data for the food chain and dose module for terrestrial pathways. During the last fifteen years two different codes have been used in Austria for support during accidents with radioactive releases: O.E.C.O.S.Y.S. and R.O.D.O.S.. Adaptations and improvements have been performed to give better tools, they are detailed in this paper. (N.C.)

  7. Decision aids that support decisions about prenatal testing for Down syndrome: an environmental scan.

    Science.gov (United States)

    Leiva Portocarrero, Maria Esther; Garvelink, Mirjam M; Becerra Perez, Maria Margarita; Giguère, Anik; Robitaille, Hubert; Wilson, Brenda J; Rousseau, François; Légaré, France

    2015-09-24

    Prenatal screening tests for Down syndrome (DS) are routine in many developed countries and new tests are rapidly becoming available. Decisions about prenatal screening are increasingly complex with each successive test, and pregnant women need information about risks and benefits as well as clarity about their values. Decision aids (DAs) can help healthcare providers support women in this decision. Using an environmental scan, we aimed to identify publicly available DAs focusing on prenatal screening/diagnosis for Down syndrome that provide effective support for decision making. Data sources searched were the Decision Aids Library Inventory (DALI) of the Ottawa Patient Decision Aids Research Group at the Ottawa Health Research Institute; Google searches on the internet; professional organizations, academic institutions and other experts in the field; and references in existing systematic reviews on DAs. Eligible DAs targeted pregnant women, focused on prenatal screening and/or diagnosis, applied to tests for fetal abnormalities or aneuploidies, and were in French, English, Spanish or Portuguese. Pairs of reviewers independently identified eligible DAs and extracted characteristics including the presence of practical decision support tools and features to aid comprehension. They then performed quality assessment using the 16 minimum standards established by the International Patient Decision Aids Standards (IPDASi v4.0). Of 543 potentially eligible DAs (512 in DALI, 27 from experts, and four on the internet), 23 were eligible and 20 were available for data extraction. DAs were developed from 1996 to 2013 in six countries (UK, USA, Canada, Australia, Sweden, and France). Five DAs were for prenatal screening, three for prenatal diagnosis and 12 for both). Eight contained values clarification methods (personal worksheets). The 20 DAs scored a median of 10/16 (range 6-15) on the 16 IPDAS minimum standards. None of the 20 included DAs met all 16 IPDAS minimum standards

  8. Decision support system for health care resources allocation.

    Science.gov (United States)

    Sebaa, Abderrazak; Nouicer, Amina; Tari, AbdelKamel; Tarik, Ramtani; Abdellah, Ouhab

    2017-06-01

    A study about healthcare resources can improve decisions regarding the allotment and mobilization of medical resources and to better guide future investment in the health sector. The aim of this work was to design and implement a decision support system to improve medical resources allocation of Bejaia region. To achieve the retrospective cohort study, we integrated existing clinical databases from different Bejaia department health sector institutions (an Algerian department) to collect information about patients from January 2015 through December 2015. Data integration was performed in a data warehouse using the multi-dimensional model and OLAP cube. During implementation, we used Microsoft SQL server 2012 and Microsoft Excel 2010. A medical decision support platform was introduced, and was implemented during the planning stages allowing the management of different medical orientations, it provides better apportionment and allotment of medical resources, and ensures that the allocation of health care resources has optimal effects on improving health. In this study, we designed and implemented a decision support system which would improve health care in Bejaia department to especially assist in the selection of the optimum location of health center and hospital, the specialty of the health center, the medical equipment and the medical staff.

  9. Modelling and simulation-based acquisition decision support: present & future

    CSIR Research Space (South Africa)

    Naidoo, S

    2009-10-01

    Full Text Available stream_source_info Naidoo1_2009.pdf.txt stream_content_type text/plain stream_size 24551 Content-Encoding UTF-8 stream_name Naidoo1_2009.pdf.txt Content-Type text/plain; charset=UTF-8 1 Modelling & Simulation...-Based Acquisition Decision Support: Present & Future Shahen Naidoo Abstract The Ground Based Air Defence System (GBADS) Programme, of the South African Army has been applying modelling and simulation (M&S) to provide acquisition decision and doctrine...

  10. Decision Support System for Optimized Herbicide Dose in Spring Barley

    DEFF Research Database (Denmark)

    Sønderskov, Mette; Kudsk, Per; Mathiassen, Solvejg K

    2014-01-01

    Crop Protection Online (CPO) is a decision support system, which integrates decision algorithms quantifying the requirement for weed control and a herbicide dose model. CPO was designed to be used by advisors and farmers to optimize the choice of herbicide and dose. The recommendations from CPO...... as the Treatment Frequency Index (TFI)) compared to a high level of required weed control. The observations indicated that the current level of weed control required is robust for a range of weed scenarios. Weed plant numbers 3 wk after spraying indicated that the growth of the weed species were inhibited...

  11. Assessing the quality of decision support technologies using the International Patient Decision Aid Standards instrument (IPDASi.

    Directory of Open Access Journals (Sweden)

    Glyn Elwyn

    Full Text Available To describe the development, validation and inter-rater reliability of an instrument to measure the quality of patient decision support technologies (decision aids.Scale development study, involving construct, item and scale development, validation and reliability testing.There has been increasing use of decision support technologies--adjuncts to the discussions clinicians have with patients about difficult decisions. A global interest in developing these interventions exists among both for-profit and not-for-profit organisations. It is therefore essential to have internationally accepted standards to assess the quality of their development, process, content, potential bias and method of field testing and evaluation.Scale development study, involving construct, item and scale development, validation and reliability testing.Twenty-five researcher-members of the International Patient Decision Aid Standards Collaboration worked together to develop the instrument (IPDASi. In the fourth Stage (reliability study, eight raters assessed thirty randomly selected decision support technologies.IPDASi measures quality in 10 dimensions, using 47 items, and provides an overall quality score (scaled from 0 to 100 for each intervention. Overall IPDASi scores ranged from 33 to 82 across the decision support technologies sampled (n = 30, enabling discrimination. The inter-rater intraclass correlation for the overall quality score was 0.80. Correlations of dimension scores with the overall score were all positive (0.31 to 0.68. Cronbach's alpha values for the 8 raters ranged from 0.72 to 0.93. Cronbach's alphas based on the dimension means ranged from 0.50 to 0.81, indicating that the dimensions, although well correlated, measure different aspects of decision support technology quality. A short version (19 items was also developed that had very similar mean scores to IPDASi and high correlation between short score and overall score 0.87 (CI 0.79 to 0.92.This work

  12. [Software support for automatic (computerized) work stations for dentists].

    Science.gov (United States)

    Prokhonchukov, A A; Balashov, A N; Zhizhina, N A; Pelkovskiĭ, V Iu

    1997-01-01

    The authors describe the software for a basic computer unified system of working places for dentists specializing in oral, dental surgery and orthodontics with diaries and special entries for each section. The computer system head physician--registration office--primary examination room--rooms of dental treatment, physiotherapy, and x-ray examination--is intended for use as part of local computer network of dental clinics in the MS DOS and Windows systems. Application of the system improves the labor efficiency by up to 35% and the financial efficacy by almost 30%. It also warrants legal protection of both physicians and patients.

  13. Real time data acquisition and processing system software supported by RDOS

    International Nuclear Information System (INIS)

    Yang Huimin; Chou Gongchun; Hao Shuxiang

    1982-01-01

    The paper describes a system software supported by RDOS operating system for management and supervision a multiuser nuclear spectrum data acquisition and processing system to be made of NOVA/840 computer. The system has manifold functions including four direct address data acquisition channels. One multi-dimension nuclear data acquisition channel, four scalers and four automatic control entrances. Every channel is used competitively by each user. The system's management and all processing functions are performed by system software. The architecture of the system can renew according to users' requirement with support of the system software.This article explains the logical structure of the system software and discusses some technical keys

  14. Communication in support of software sharing and collaborative development

    International Nuclear Information System (INIS)

    Knott, M.J.

    1995-01-01

    To be successful, software which is shared among several users requires a means of reporting trouble and receiving help. This is even more critical in the case of a collaborative software development effort. The Experimental Physics and Industrial Control System (EPICS) collaboration uses the Internet as its major communication medium. In addition to conventional electronic mail and occasional use of MBONE teleconferencing a distributed listserver system is used to announce releases, ask for aid, announce the discovery and disposal of bugs, and to converse generally about the future development directions of EPICS tools and methods. The EPICS listservers are divided into several subject categories, and since all questions, answers, and announcements are archived for future reference, some statistics can be gleaned from these records. Such statistics and information from the collaborators show that they make use of this system and find it helpful. As a manager, I have found that the system gives reassuring evidence that the collaboration is alive, responsive to calls for aid, and helpful even to those not actively participating in the question and answer activity

  15. A Comparison of Four Software Programs for Implementing Decision Analytic Cost-Effectiveness Models.

    Science.gov (United States)

    Hollman, Chase; Paulden, Mike; Pechlivanoglou, Petros; McCabe, Christopher

    2017-08-01

    The volume and technical complexity of both academic and commercial research using decision analytic modelling has increased rapidly over the last two decades. The range of software programs used for their implementation has also increased, but it remains true that a small number of programs account for the vast majority of cost-effectiveness modelling work. We report a comparison of four software programs: TreeAge Pro, Microsoft Excel, R and MATLAB. Our focus is on software commonly used for building Markov models and decision trees to conduct cohort simulations, given their predominance in the published literature around cost-effectiveness modelling. Our comparison uses three qualitative criteria as proposed by Eddy et al.: "transparency and validation", "learning curve" and "capability". In addition, we introduce the quantitative criterion of processing speed. We also consider the cost of each program to academic users and commercial users. We rank the programs based on each of these criteria. We find that, whilst Microsoft Excel and TreeAge Pro are good programs for educational purposes and for producing the types of analyses typically required by health technology assessment agencies, the efficiency and transparency advantages of programming languages such as MATLAB and R become increasingly valuable when more complex analyses are required.

  16. Prioritization of engineering support requests and advanced technology projects using decision support and industrial engineering models

    Science.gov (United States)

    Tavana, Madjid

    1995-01-01

    The evaluation and prioritization of Engineering Support Requests (ESR's) is a particularly difficult task at the Kennedy Space Center (KSC) -- Shuttle Project Engineering Office. This difficulty is due to the complexities inherent in the evaluation process and the lack of structured information. The evaluation process must consider a multitude of relevant pieces of information concerning Safety, Supportability, O&M Cost Savings, Process Enhancement, Reliability, and Implementation. Various analytical and normative models developed over the past have helped decision makers at KSC utilize large volumes of information in the evaluation of ESR's. The purpose of this project is to build on the existing methodologies and develop a multiple criteria decision support system that captures the decision maker's beliefs through a series of sequential, rational, and analytical processes. The model utilizes the Analytic Hierarchy Process (AHP), subjective probabilities, the entropy concept, and Maximize Agreement Heuristic (MAH) to enhance the decision maker's intuition in evaluating a set of ESR's.

  17. Software

    Energy Technology Data Exchange (ETDEWEB)

    Macedo, R.; Budd, G.; Ross, E.; Wells, P.

    2010-07-15

    The software section of this journal presented new software programs that have been developed to help in the exploration and development of hydrocarbon resources. Software provider IHS Inc. has made additions to its geological and engineering analysis software tool, IHS PETRA, a product used by geoscientists and engineers to visualize, analyze and manage well production, well log, drilling, reservoir, seismic and other related information. IHS PETRA also includes a directional well module and a decline curve analysis module to improve analysis capabilities in unconventional reservoirs. Petris Technology Inc. has developed a software to help manage the large volumes of data. PetrisWinds Enterprise (PWE) helps users find and manage wellbore data, including conventional wireline and MWD core data; analysis core photos and images; waveforms and NMR; and external files documentation. Ottawa-based Ambercore Software Inc. has been collaborating with Nexen on the Petroleum iQ software for steam assisted gravity drainage (SAGD) producers. Petroleum iQ integrates geology and geophysics data with engineering data in 3D and 4D. Calgary-based Envirosoft Corporation has developed a software that reduces the costly and time-consuming effort required to comply with Directive 39 of the Alberta Energy Resources Conservation Board. The product includes an emissions modelling software. Houston-based Seismic Micro-Technology (SMT) has developed the Kingdom software that features the latest in seismic interpretation. Holland-based Joa Oil and Gas and Calgary-based Computer Modelling Group have both supplied the petroleum industry with advanced reservoir simulation software that enables reservoir interpretation. The 2010 software survey included a guide to new software applications designed to facilitate petroleum exploration, drilling and production activities. Oil and gas producers can use the products for a range of functions, including reservoir characterization and accounting. In

  18. A Framework for a Decision Support System in a Hierarchical Extended Enterprise Decision Context

    Science.gov (United States)

    Boza, Andrés; Ortiz, Angel; Vicens, Eduardo; Poler, Raul

    Decision Support System (DSS) tools provide useful information to decision makers. In an Extended Enterprise, a new goal, changes in the current objectives or small changes in the extended enterprise configuration produce a necessary adjustment in its decision system. A DSS in this context must be flexible and agile to make suitable an easy and quickly adaptation to this new context. This paper proposes to extend the Hierarchical Production Planning (HPP) structure to an Extended Enterprise decision making context. In this way, a framework for DSS in Extended Enterprise context is defined using components of HPP. Interoperability details have been reviewed to identify the impact in this framework. The proposed framework allows overcoming some interoperability barriers, identifying and organizing components for a DSS in Extended Enterprise context, and working in the definition of an architecture to be used in the design process of a flexible DSS in Extended Enterprise context which can reuse components for futures Extended Enterprise configurations.

  19. A Decision Support System for Optimum Use of Fertilizers

    Energy Technology Data Exchange (ETDEWEB)

    R. L. Hoskinson; J. R. Hess; R. K. Fink

    1999-07-01

    The Decision Support System for Agriculture (DSS4Ag) is an expert system being developed by the Site-Specific Technologies for Agriculture (SST4Ag) precision farming research project at the INEEL. DSS4Ag uses state-of-the-art artificial intelligence and computer science technologies to make spatially variable, site-specific, economically optimum decisions on fertilizer use. The DSS4Ag has an open architecture that allows for external input and addition of new requirements and integrates its results with existing agricultural systems' infrastructures. The DSS4Ag reflects a paradigm shift in the information revolution in agriculture that is precision farming. We depict this information revolution in agriculture as an historic trend in the agricultural decision-making process.

  20. A Decision Support System for Optimum Use of Fertilizers

    Energy Technology Data Exchange (ETDEWEB)

    Hoskinson, Reed Louis; Hess, John Richard; Fink, Raymond Keith

    1999-07-01

    The Decision Support System for Agriculture (DSS4Ag) is an expert system being developed by the Site-Specific Technologies for Agriculture (SST4Ag) precision farming research project at the INEEL. DSS4Ag uses state-of-the-art artificial intelligence and computer science technologies to make spatially variable, site-specific, economically optimum decisions on fertilizer use. The DSS4Ag has an open architecture that allows for external input and addition of new requirements and integrates its results with existing agricultural systems’ infrastructures. The DSS4Ag reflects a paradigm shift in the information revolution in agriculture that is precision farming. We depict this information revolution in agriculture as an historic trend in the agricultural decision-making process.

  1. Functional specifications for a radioactive waste decision support system

    International Nuclear Information System (INIS)

    Westrom, G.B.; Kurrasch, E.R.; Carlton, R.E.; Vance, J.N.

    1989-09-01

    It is generally recognized that decisions relative to the treatment, handling, transportation and disposal of low-level wastes produced in nuclear power plants involve a complex array of many inter-related elements or considerations. Complex decision processes can be aided through the use of computer-based expert systems which are based on the knowledge of experts and the inferencing of that knowledge to provide advice to an end-user. To determine the feasibility of developing and applying an expert system in nuclear plant low level waste operations, a Functional Specification for a Radwaste Decision Support System (RDSS) was developed. All areas of radwaste management, from the point of waste generation to the disposition of the waste in the final disposal location were considered for inclusion within the scope of the RDSS. 27 figs., 8 tabs

  2. Perspectives on Spatial Decision Support Concerning Location of Biogas Production

    DEFF Research Database (Denmark)

    Bojesen, Mikkel

    in biogas production. This ambition requires that more than 20 new large scale centralised biogas plants are built. The location of these plants is associated with a number of externalities and uncertainties and the existing biogas sector struggles to establish itself as a viable energy producing sector....... Meanwhile planners and decision makers struggle to find sustainable locations that comprehensively balance the multiple concerns the location of biogas facilities includes. This PhD project examines how spatial decision support models can be used to ensure sustainable locations of future biogas plants......, understand the industrial economic aspects of such a role. Through the use of spatial multi-criteria evaluation models stakeholder preferences to decision criteria are included in a sustainable biogas facility location analysis. By the use of these models it is demonstrated how overall biogas production...

  3. Decision support for organ offers in liver transplantation.

    Science.gov (United States)

    Volk, Michael L; Goodrich, Nathan; Lai, Jennifer C; Sonnenday, Christopher; Shedden, Kerby

    2015-06-01

    Organ offers in liver transplantation are high-risk medical decisions with a low certainty of whether a better liver offer will come along before death. We hypothesized that decision support could improve the decision to accept or decline. With data from the Scientific Registry of Transplant Recipients, survival models were constructed for 42,857 waiting-list patients and 28,653 posttransplant patients from 2002 to 2008. Daily covariate-adjusted survival probabilities from these 2 models were combined into a 5-year area under the curve to create an individualized prediction of whether an organ offer should be accepted for a given patient. Among 650,832 organ offers from 2008 to 2013, patient survival was compared by whether the clinical decision was concordant or discordant with model predictions. The acceptance benefit (AB)--the predicted gain or loss of life by accepting a given organ versus waiting for the next organ--ranged from 3 to -22 years (harm) and varied geographically; for example, the average benefit of accepting a donation after cardiac death organ ranged from 0.47 to -0.71 years by donation service area. Among organ offers, even when AB was >1 year, the offer was only accepted 10% of the time. Patient survival from the time of the organ offer was better if the model recommendations and the clinical decision were concordant: for offers with AB > 0, the 3-year survival was 80% if the offer was accepted and 66% if it was declined (P decision support may improve patient survival in liver transplantation. © 2015 American Association for the Study of Liver Diseases.

  4. Prototype of a Web-based Participative Decision Support Platform in Natural Hazards and Risk Management

    Directory of Open Access Journals (Sweden)

    Zar Chi Aye

    2015-07-01

    Full Text Available This paper presents the current state and development of a prototype web-GIS (Geographic Information System decision support platform intended for application in natural hazards and risk management, mainly for floods and landslides. This web platform uses open-source geospatial software and technologies, particularly the Boundless (formerly OpenGeo framework and its client side software development kit (SDK. The main purpose of the platform is to assist the experts and stakeholders in the decision-making process for evaluation and selection of different risk management strategies through an interactive participation approach, integrating web-GIS interface with decision support tool based on a compromise programming approach. The access rights and functionality of the platform are varied depending on the roles and responsibilities of stakeholders in managing the risk. The application of the prototype platform is demonstrated based on an example case study site: Malborghetto Valbruna municipality of North-Eastern Italy where flash floods and landslides are frequent with major events having occurred in 2003. The preliminary feedback collected from the stakeholders in the region is discussed to understand the perspectives of stakeholders on the proposed prototype platform.

  5. Applying the Wildland Fire Decision Support System (WFDSS) to support risk-informed decision making: The Gold Pan Fire, Bitterroot National Forest, Montana, USA

    Science.gov (United States)

    Erin K. Noonan-Wright; Tonja S. Opperman

    2015-01-01

    In response to federal wildfire policy changes, risk-informed decision-making by way of improved decision support, is increasingly becoming a component of managing wildfires. As fire incidents escalate in size and complexity, the Wildland Fire Decision Support System (WFDSS) provides support with different analytical tools as fire conditions change. We demonstrate the...

  6. Human Decision Processes: Implications for SSA Support Tools

    Science.gov (United States)

    Picciano, P.

    2013-09-01

    paper), one opinion shared is that the rational, economic, deliberate listing/evaluation of all options is NOT representative of how many decision are made. A framework gaining interest lately describes two systems predominantly at work: intuition and reasoning (Kahneman, 2003). Intuition is fast, automatic, and parallel contrasted with the more effortful, deliberative, and sequential reasoning. One of the issues of contention is that considerable research is stacked supporting both sides claiming that intuition is: • A hallmark of expertise responsible for rapid, optimal decisions in the face of adversity • A vulnerability where biases serve as decision traps leading to wrong choices Using seminal studies from a range of domains and tasking, potential solutions for SSA decision support will be offered. Important issues such as managing uncertainty, framing inquiries, and information architecture, and contextual cues will be discussed. The purpose is to provide awareness of the human limitations and capabilities in complex decision making so engineers and designers can consider such factors in their development of SSA tools.

  7. Information System Engineering Supporting Observation, Orientation, Decision, and Compliant Action

    Science.gov (United States)

    Georgakopoulos, Dimitrios

    The majority of today's software systems and organizational/business structures have been built on the foundation of solving problems via long-term data collection, analysis, and solution design. This traditional approach of solving problems and building corresponding software systems and business processes, falls short in providing the necessary solutions needed to deal with many problems that require agility as the main ingredient of their solution. For example, such agility is needed in responding to an emergency, in military command control, physical security, price-based competition in business, investing in the stock market, video gaming, network monitoring and self-healing, diagnosis in emergency health care, and many other areas that are too numerous to list here. The concept of Observe, Orient, Decide, and Act (OODA) loops is a guiding principal that captures the fundamental issues and approach for engineering information systems that deal with many of these problem areas. However, there are currently few software systems that are capable of supporting OODA. In this talk, we provide a tour of the research issues and state of the art solutions for supporting OODA. In addition, we provide specific examples of OODA solutions we have developed for the video surveillance and emergency response domains.

  8. A Decision Support Model and Tool to Assist Financial Decision-Making in Universities

    Science.gov (United States)

    Bhayat, Imtiaz; Manuguerra, Maurizio; Baldock, Clive

    2015-01-01

    In this paper, a model and tool is proposed to assist universities and other mission-based organisations to ascertain systematically the optimal portfolio of projects, in any year, meeting the organisations risk tolerances and available funds. The model and tool presented build on previous work on university operations and decision support systems…

  9. A Customized Drought Decision Support Tool for Hsinchu Science Park

    Science.gov (United States)

    Huang, Jung; Tien, Yu-Chuan; Lin, Hsuan-Te; Liu, Tzu-Ming; Tung, Ching-Pin

    2016-04-01

    Climate change creates more challenges for water resources management. Due to the lack of sufficient precipitation in Taiwan in fall of 2014, many cities and counties suffered from water shortage during early 2015. Many companies in Hsinchu Science Park were significantly influenced and realized that they need a decision support tool to help them managing water resources. Therefore, a customized computer program was developed, which is capable of predicting the future status of public water supply system and water storage of factories when the water rationing is announced by the government. This program presented in this study for drought decision support (DDSS) is a customized model for a semiconductor company in the Hsinchu Science Park. The DDSS is programmed in Java which is a platform-independent language. System requirements are any PC with the operating system above Windows XP and an installed Java SE Runtime Environment 7. The DDSS serves two main functions. First function is to predict the future storage of Baoshan Reservoir and Second Baoshan Reservoir, so to determine the time point of water use restriction in Hsinchu Science Park. Second function is to use the results to help the company to make decisions to trigger their response plans. The DDSS can conduct real-time scenario simulations calculating the possible storage of water tank for each factory with pre-implementation and post-implementation of those response plans. In addition, DDSS can create reports in Excel to help decision makers to compare results between different scenarios.

  10. Dashboard visualizations: Supporting real-time throughput decision-making.

    Science.gov (United States)

    Franklin, Amy; Gantela, Swaroop; Shifarraw, Salsawit; Johnson, Todd R; Robinson, David J; King, Brent R; Mehta, Amit M; Maddow, Charles L; Hoot, Nathan R; Nguyen, Vickie; Rubio, Adriana; Zhang, Jiajie; Okafor, Nnaemeka G

    2017-07-01

    Providing timely and effective care in the emergency department (ED) requires the management of individual patients as well as the flow and demands of the entire department. Strategic changes to work processes, such as adding a flow coordination nurse or a physician in triage, have demonstrated improvements in throughput times. However, such global strategic changes do not address the real-time, often opportunistic workflow decisions of individual clinicians in the ED. We believe that real-time representation of the status of the entire emergency department and each patient within it through information visualizations will better support clinical decision-making in-the-moment and provide for rapid intervention to improve ED flow. This notion is based on previous work where we found that clinicians' workflow decisions were often based on an in-the-moment local perspective, rather than a global perspective. Here, we discuss the challenges of designing and implementing visualizations for ED through a discussion of the development of our prototype Throughput Dashboard and the potential it holds for supporting real-time decision-making. Copyright © 2017. Published by Elsevier Inc.

  11. Overcoming barriers to development of cooperative medical decision support models.

    Science.gov (United States)

    Hudson, Donna L; Cohen, Maurice E

    2012-01-01

    Attempts to automate the medical decision making process have been underway for the at least fifty years, beginning with data-based approaches that relied chiefly on statistically-based methods. Approaches expanded to include knowledge-based systems, both linear and non-linear neural networks, agent-based systems, and hybrid methods. While some of these models produced excellent results none have been used extensively in medical practice. In order to move these methods forward into practical use, a number of obstacles must be overcome, including validation of existing systems on large data sets, development of methods for including new knowledge as it becomes available, construction of a broad range of decision models, and development of non-intrusive methods that allow the physician to use these decision aids in conjunction with, not instead of, his or her own medical knowledge. None of these four requirements will come easily. A cooperative effort among researchers, including practicing MDs, is vital, particularly as more information on diseases and their contributing factors continues to expand resulting in more parameters than the human decision maker can process effectively. In this article some of the basic structures that are necessary to facilitate the use of an automated decision support system are discussed, along with potential methods for overcoming existing barriers.

  12. Encounter Decision Aid vs. Clinical Decision Support or Usual Care to Support Patient-Centered Treatment Decisions in Osteoporosis: The Osteoporosis Choice Randomized Trial II.

    Directory of Open Access Journals (Sweden)

    Annie LeBlanc

    Full Text Available Osteoporosis Choice, an encounter decision aid, can engage patients and clinicians in shared decision making about osteoporosis treatment. Its effectiveness compared to the routine provision to clinicians of the patient's estimated risk of fracture using the FRAX calculator is unknown.Patient-level, randomized, three-arm trial enrolling women over 50 with osteopenia or osteoporosis eligible for treatment with bisphosphonates, where the use of Osteoporosis Choice was compared to FRAX only and to usual care to determine impact on patient knowledge, decisional conflict, involvement in the decision-making process, decision to start and adherence to bisphosphonates.We enrolled 79 women in the three arms. Because FRAX estimation alone and usual care produced similar results, we grouped them for analysis. Compared to these, use of Osteoporosis Choice increased patient knowledge (median score 6 vs. 4, p = .01, improved understanding of fracture risk and risk reduction with bisphosphonates (p = .01 and p<.0001, respectively, had no effect on decision conflict, and increased patient engagement in the decision making process (OPTION scores 57% vs. 43%, p = .001. Encounters with the decision aid were 0.8 minutes longer (range: 33 minutes shorter to 3.0 minutes longer. There were twice as many patients receiving and filling prescriptions in the decision aid arm (83% vs. 40%, p = .07; medication adherence at 6 months was no different across arms.Supporting both patients and clinicians during the clinical encounter with the Osteoporosis Choice decision aid efficiently improves treatment decision making when compared to usual care with or without clinical decision support with FRAX results.clinical trials.gov NCT00949611.

  13. Clinical decision support must be useful, functional is not enough

    DEFF Research Database (Denmark)

    Kortteisto, Tiina; Komulainen, Jorma; Mäkelä, Marjukka

    2012-01-01

    the use of computer-based clinical decision support (eCDS) in primary care and how different professional groups experience it. Our aim was to describe specific reasons for using or not using eCDS among primary care professionals. METHODS: The setting was a Finnish primary health care organization with 48......ABSTRACT: BACKGROUND: Health information technology, particularly electronic decision support systems, can reduce the existing gap between evidence-based knowledge and health care practice but professionals have to accept and use this information. Evidence is scant on which features influence...... professionals receiving patient-specific guidance at the point of care. Multiple data (focus groups, questionnaire and spontaneous feedback) were analyzed using deductive content analysis and descriptive statistics. RESULTS: The content of the guidance is a significant feature of the primary care professional...

  14. Advanced intelligent computational technologies and decision support systems

    CERN Document Server

    Kountchev, Roumen

    2014-01-01

    This book offers a state of the art collection covering themes related to Advanced Intelligent Computational Technologies and Decision Support Systems which can be applied to fields like healthcare assisting the humans in solving problems. The book brings forward a wealth of ideas, algorithms and case studies in themes like: intelligent predictive diagnosis; intelligent analyzing of medical images; new format for coding of single and sequences of medical images; Medical Decision Support Systems; diagnosis of Down’s syndrome; computational perspectives for electronic fetal monitoring; efficient compression of CT Images; adaptive interpolation and halftoning for medical images; applications of artificial neural networks for real-life problems solving; present and perspectives for Electronic Healthcare Record Systems; adaptive approaches for noise reduction in sequences of CT images etc.

  15. Compromise decision support problems for hierarchical design involving uncertainty

    Science.gov (United States)

    Vadde, S.; Allen, J. K.; Mistree, F.

    1994-08-01

    In this paper an extension to the traditional compromise Decision Support Problem (DSP) formulation is presented. Bayesian statistics is used in the formulation to model uncertainties associated with the information being used. In an earlier paper a compromise DSP that accounts for uncertainty using fuzzy set theory was introduced. The Bayesian Decision Support Problem is described in this paper. The method for hierarchical design is demonstrated by using this formulation to design a portal frame. The results are discussed and comparisons are made with those obtained using the fuzzy DSP. Finally, the efficacy of incorporating Bayesian statistics into the traditional compromise DSP formulation is discussed and some pending research issues are described. Our emphasis in this paper is on the method rather than the results per se.

  16. Designing decision support tools for targeted N-regulation

    DEFF Research Database (Denmark)

    Christensen, Andreas Aagaard; Piil, Kristoffer; Andersen, Peter Stubkjær

    2017-01-01

    data model for land use data – the dNmark landscape model. Based on input data which is corrected and edited by workshop participants, the tool estimates the effect of potential land use scenarios on nutrient emissions. The tool was tested in 5 scenario workshops in case areas in Denmark in 2016...... in Denmark to develop and improve a functioning decision support tool for landscape scale N-management. The aim of the study is to evaluate how a decision support tool can best be designed in order to enable landscape scale strategic N-management practices. Methods: A prototype GIS-tool for capturing......, storing, editing, displaying and modelling landscape scale farming practices and associated emission consequences was developed. The tool was designed to integrate locally held knowledge with national scale datasets in live scenario situations through the implementation of a flexible, uniform and editable...

  17. Information support of decision-making in the early stages of new product development when approaching marketing management

    Directory of Open Access Journals (Sweden)

    A. A. Tishhenko

    2017-01-01

    Full Text Available Goal. To create theoretical and practical approaches to information support of the decision making procedure at the initial stages of developing a new product with a marketing management approach that allows to improve the quality of management decisions on the product. Material and methods. The projected software package on the basis of expert assessments and fuzzy sets, allows to automate the decision to implement innovation at an early stage. The work used such scientific methods as generalization of scientific literature in the field of shaping and taking into account the features of innovation, Solutions in the initial stages of development, methods of expert evaluation and elements of fuzzy sets. Results and its discussion. The article presents the rationale and possibilities for informational support of the decision-making procedure for innovative products. The authors also proposed a methodology for making a decision when developing a new product based on expert and predictive assessments of innovation at the initial stages of its creation. A software package has been developed that automates the decision to manufacture a new product at the initial stages of production. Conclusion. Despite a large number of theoretical developments in innovative management, the risk associated with the release of new products remains quite high. The developed methodology of information support for decision-making at the initial stages of the development of a new product will reduce the risk of the lack of demand for innovation.

  18. Ecological user interface for emergency management decision support systems

    DEFF Research Database (Denmark)

    Andersen, V.

    2003-01-01

    The user interface for decision support systems is normally structured for presenting relevant data for the skilled user in order to allow fast assessment and action of the hazardous situation, or for more complex situations to present the relevant rules and procedures to be followed in order to ...... of this paper is to discuss the possibility of using the same principles for emergency management with the aim of improved performance in complex and unanticipated situations....

  19. Intelligent Decision Support System for Bank Loans Risk Classification

    Institute of Scientific and Technical Information of China (English)

    杨保安; 马云飞; 俞莲

    2001-01-01

    Intelligent Decision Support System (IISS) for Bank Loans Risk Classification (BLRC), based on the way of integration Artificial Neural Network (ANN) and Expert System (ES), is proposed. According to the feature of BLRC, the key financial and non-financial factors are analyzed. Meanwhile, ES and Model Base (MB) which contain ANN are designed . The general framework,interaction and integration of the system are given. In addition, how the system realizes BLRC is elucidated in detail.

  20. Decision Support System and Customer Relationship Management as Components of the Cybernetic System Enterprise

    Directory of Open Access Journals (Sweden)

    Ruxandra MISDOLEA

    2010-01-01

    Full Text Available This study analyzes the role played by the information system and its component, the software system, in a larger system - the Enterprise. In this context, the paper focuses on the structure of Decision Support System and Customer Relationship Management and their benefits in the functioning of the global system, by examining the conditions of implementation of these tools in the organization. We will show that used independently these tools offer reduced services, but when interconnected, they become a very powerful tool for command and control. Viability, evolution and autonomy requested by users for their information system are obtained more easily by a systemic-cybernetic approach to the Enterprise.

  1. A Knowledge Management and Decision Support Model for Enterprises

    Directory of Open Access Journals (Sweden)

    Patrizia Ribino

    2011-01-01

    Full Text Available We propose a novel knowledge management system (KMS for enterprises. Our system exploits two different approaches for knowledge representation and reasoning: a document-based approach based on data-driven creation of a semantic space and an ontology-based model. Furthermore, we provide an expert system capable of supporting the enterprise decisional processes and a semantic engine which performs intelligent search on the enterprise knowledge bases. The decision support process exploits the Bayesian networks model to improve business planning process when performed under uncertainty.

  2. Developing eHealth technology for people with dementia : towards a supportive decision tool facilitating shared decision making in dementia

    NARCIS (Netherlands)

    Span, M.; Smits, C.; Groen-van der Ven, L.; Jukema, J.; Cremers, A.H.M.; Vernooij-Dassen, M.; Eefsting, J.; Hettinga, M.

    2013-01-01

    People with dementia are confronted with many decisions. However, they are often not involved in the process of the decision-making. Shared Decision-Making (SDM) enables involvement of persons with dementia in the decision-making process. In our study, we develop a supportive IT application aiming

  3. Computerized Adaptive Test vs. decision trees: Development of a support decision system to identify suicidal behavior.

    Science.gov (United States)

    Delgado-Gomez, D; Baca-Garcia, E; Aguado, D; Courtet, P; Lopez-Castroman, J

    2016-12-01

    Several Computerized Adaptive Tests (CATs) have been proposed to facilitate assessments in mental health. These tests are built in a standard way, disregarding useful and usually available information not included in the assessment scales that could increase the precision and utility of CATs, such as the history of suicide attempts. Using the items of a previously developed scale for suicidal risk, we compared the performance of a standard CAT and a decision tree in a support decision system to identify suicidal behavior. We included the history of past suicide attempts as a class for the separation of patients in the decision tree. The decision tree needed an average of four items to achieve a similar accuracy than a standard CAT with nine items. The accuracy of the decision tree, obtained after 25 cross-validations, was 81.4%. A shortened test adapted for the separation of suicidal and non-suicidal patients was developed. CATs can be very useful tools for the assessment of suicidal risk. However, standard CATs do not use all the information that is available. A decision tree can improve the precision of the assessment since they are constructed using a priori information. Copyright © 2016 Elsevier B.V. All rights reserved.

  4. Tethys: A Platform for Water Resources Modeling and Decision Support Apps

    Science.gov (United States)

    Swain, N. R.; Christensen, S. D.; Jones, N.; Nelson, E. J.

    2014-12-01

    Cloud-based applications or apps are a promising medium through which water resources models and data can be conveyed in a user-friendly environment—making them more accessible to decision-makers and stakeholders. In the context of this work, a water resources web app is a web application that exposes limited modeling functionality for a scenario exploration activity in a structured workflow (e.g.: land use change runoff analysis, snowmelt runoff prediction, and flood potential analysis). The technical expertise required to develop water resources web apps can be a barrier to many potential developers of water resources apps. One challenge that developers face is in providing spatial storage, analysis, and visualization for the spatial data that is inherent to water resources models. The software projects that provide this functionality are non-standard to web development and there are a large number of free and open source software (FOSS) projects to choose from. In addition, it is often required to synthesize several software projects to provide all of the needed functionality. Another challenge for the developer will be orchestrating the use of several software components. Consequently, the initial software development investment required to deploy an effective water resources cloud-based application can be substantial. The Tethys Platform has been developed to lower the technical barrier and minimize the initial development investment that prohibits many scientists and engineers from making use of the web app medium. Tethys synthesizes several software projects including PostGIS for spatial storage, 52°North WPS for spatial analysis, GeoServer for spatial publishing, Google Earth™, Google Maps™ and OpenLayers for spatial visualization, and Highcharts for plotting tabular data. The software selection came after a literature review of software projects being used to create existing earth sciences web apps. All of the software is linked via a Python

  5. Supporting Early Math--Rationales and Requirements for High Quality Software

    Science.gov (United States)

    Haake, Magnus; Husain, Layla; Gulz, Agneta

    2015-01-01

    There is substantial evidence that preschooler's performance in early math is highly correlated to math performance throughout school as well as academic skills in general. One way to help children attain early math skills is by using targeted educational software and the paper discusses potential gains of using such software to support early math…

  6. Fusion Analytics: A Data Integration System for Public Health and Medical Disaster Response Decision Support

    Science.gov (United States)

    Passman, Dina B.

    2013-01-01

    Objective The objective of this demonstration is to show conference attendees how they can integrate, analyze, and visualize diverse data type data from across a variety of systems by leveraging an off-the-shelf enterprise business intelligence (EBI) solution to support decision-making in disasters. Introduction Fusion Analytics is the data integration system developed by the Fusion Cell at the U.S. Department of Health and Human Services (HHS), Office of the Assistant Secretary for Preparedness and Response (ASPR). Fusion Analytics meaningfully augments traditional public and population health surveillance reporting by providing web-based data analysis and visualization tools. Methods Fusion Analytics serves as a one-stop-shop for the web-based data visualizations of multiple real-time data sources within ASPR. The 24-7 web availability makes it an ideal analytic tool for situational awareness and response allowing stakeholders to access the portal from any internet-enabled device without installing any software. The Fusion Analytics data integration system was built using off-the-shelf EBI software. Fusion Analytics leverages the full power of statistical analysis software and delivers reports to users in a secure web-based environment. Fusion Analytics provides an example of how public health staff can develop and deploy a robust public health informatics solution using an off-the shelf product and with limited development funding. It also provides the unique example of a public health information system that combines patient data for traditional disease surveillance with manpower and resource data to provide overall decision support for federal public health and medical disaster response operations. Conclusions We are currently in a unique position within public health. One the one hand, we have been gaining greater and greater access to electronic data of all kinds over the last few years. On the other, we are working in a time of reduced government spending

  7. Software Application for Supporting the Education of Database Systems

    Science.gov (United States)

    Vágner, Anikó

    2015-01-01

    The article introduces an application which supports the education of database systems, particularly the teaching of SQL and PL/SQL in Oracle Database Management System environment. The application has two parts, one is the database schema and its content, and the other is a C# application. The schema is to administrate and store the tasks and the…

  8. Software support for irregular and loosely synchronous problems

    Science.gov (United States)

    Choudhary, A.; Fox, G.; Hiranandani, S.; Kennedy, K.; Koelbel, C.; Ranka, S.; Saltz, J.

    1992-01-01

    A large class of scientific and engineering applications may be classified as irregular and loosely synchronous from the perspective of parallel processing. We present a partial classification of such problems. This classification has motivated us to enhance FORTRAN D to provide language support for irregular, loosely synchronous problems. We present techniques for parallelization of such problems in the context of FORTRAN D.

  9. RODOS and RESY: two integrated real time on-line decision support systems for nuclear emergencies

    International Nuclear Information System (INIS)

    Ehrhardt, J.; Fischer, F.; Paesler-Sauer, J.; Schuele, O.; Benz, G.; Rafat, M.

    1993-01-01

    Based on the experience gained with the development of the German real-time system RESY for near range and early phase decision support KfK has developed the hardware and software framework of RODOS, the EC real-time on-line decision support system for nuclear emergencies. The first prototype version of RODOS incorporates models for atmospheric dispersion, for external and internal dose and dose-rate assessments, for simulating sheltering, evacuation and milk interdiction, for estimating health effects and economic costs, and for evaluating action alternatives by means of a rule based system containing components of multi-attribute value techniques. The specially designed operating system has been developed on the basis of the client-server model as a transportable package to run on workstations with a standard based UNIX operating system, and an X-Window system. One of its key features is the support of integrated external software products developed by the contractors by providing standardized services, such as system control, data management and graphical presentation. A data base of geographical structures (e.g. landscape, buildings, traffic network) with an accuracy of 30 m stored as vector data and population distribution stored in a 1 kmx1 km grid allows the presentation and evaluation of results down to a high local resolution by a special graphics subsystem. (orig./DG)

  10. Development of the decision make supporting system on incident management

    International Nuclear Information System (INIS)

    Kasamatsu, Mizuki; Hanada, Satoshi; Noda, Eisuke

    2017-01-01

    Decision Make Supporting System is designed to support appropriate decision made by top management in the nuclear severe conditions. With crisis response in nuclear power plant (NPP), information entanglement between sites and control centers during intense situations interfere with prompt and accurate decision making. This research started with that kind of background. In order to solve the issue of the information entanglement, Mitsubishi Heavy Industries, Inc. (MHI) carried out the development of the Decision Make Supporting System and the system applies the technology combining the human factors engineering (HFE) and information and communication technology (ICT). During the crisis response, various commands, reactions and communications in a human system need to be managed. Therefore, the combined HFE method including detailed task analysis, user experience (UX), graphic user interface (GUI) and related human-system interface (HSI) design method is applied to the design of the system. These design results systematize the functions that prevent interference with decision-making in the headquarters for incident management. This new solution as a system enhances the safety improvement of the NPP and contributes to develop the skills and abilities of the resources in the NPP. The system has three key features for supporting emergency situations: 'understanding the situation', 'planning the next action', and 'managing resources'. The system helps commanders and responders to grasp the whole situation and allows them to share information in real time to get a whole picture, and the system accumulates the data of the past events in the chronological order to understand correctly how they happened and plan the next action by using a knowledge database that MHI has been developed. If the unexpected event happens which are not in the incident scenario, the system provides support to formulate alternative strategies and measures. With this

  11. A Framework for the Management of Evolving Requirements in Software Systems Supporting Network-Centric Warfare

    National Research Council Canada - National Science Library

    Reynolds, Linda K

    2006-01-01

    .... There are many sources of requirements for these software systems supporting NCO, which may increase in number as the Services continue to develop the capabilities necessary for the transformation...

  12. Software-Defined Ground Stations - Enhancing Multi-Mission Support, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — This SBIR Phase 1 proposal to NASA requests $99,055.69 to enhance multiple mission support in ground stations through the use of software defined radios and virtual...

  13. Modeling and supporting the authoring process of multimedia simulation based educational software: a knowledge engineering approach

    NARCIS (Netherlands)

    Kuyper, Michiel; de Hoog, Robert; de Jong, Anthonius J.M.

    2001-01-01

    Traditionally, support for authoringeducational software focuses on the authoringprocess: the nature and sequence of theactivities that must be performed to deliverthe required product. As a consequence, themethods that are used tend to have a stronglinear flavor, which resembles the

  14. Controls Over Operating System and Security Software Supporting the Defense Finance and Accounting Service

    National Research Council Canada - National Science Library

    McKinney, Terry

    1994-01-01

    This is the final in a series of three audits of management controls over the operating systems and security software used by the information processing centers that support the Defense Finance and Accounting Centers (DFAS...

  15. New technologies for supporting real-time on-board software development

    Science.gov (United States)

    Kerridge, D.

    1995-03-01

    The next generation of on-board data management systems will be significantly more complex than current designs, and will be required to perform more complex and demanding tasks in software. Improved hardware technology, in the form of the MA31750 radiation hard processor, is one key component in addressing the needs of future embedded systems. However, to complement these hardware advances, improved support for the design and implementation of real-time data management software is now needed. This will help to control the cost and risk assoicated with developing data management software development as it becomes an increasingly significant element within embedded systems. One particular problem with developing embedded software is managing the non-functional requirements in a systematic way. This paper identifies how Logica has exploited recent developments in hard real-time theory to address this problem through the use of new hard real-time analysis and design methods which can be supported by specialized tools. The first stage in transferring this technology from the research domain to industrial application has already been completed. The MA37150 Hard Real-Time Embedded Software Support Environment (HESSE) is a loosely integrated set of hardware and software tools which directly support the process of hard real-time analysis for software targeting the MA31750 processor. With further development, this HESSE promises to provide embedded system developers with software tools which can reduce the risks associated with developing complex hard real-time software. Supported in this way by more sophisticated software methods and tools, it is foreseen that MA31750 based embedded systems can meet the processing needs for the next generation of on-board data management systems.

  16. Demonstration of Decision Support Tools for Sustainable Development

    Energy Technology Data Exchange (ETDEWEB)

    Shropshire, David Earl; Jacobson, Jacob Jordan; Berrett, Sharon; Cobb, D. A.; Worhach, P.

    2000-11-01

    The Demonstration of Decision Support Tools for Sustainable Development project integrated the Bechtel/Nexant Industrial Materials Exchange Planner and the Idaho National Engineering and Environmental Laboratory System Dynamic models, demonstrating their capabilities on alternative fuel applications in the Greater Yellowstone-Teton Park system. The combined model, called the Dynamic Industrial Material Exchange, was used on selected test cases in the Greater Yellow Teton Parks region to evaluate economic, environmental, and social implications of alternative fuel applications, and identifying primary and secondary industries. The test cases included looking at compressed natural gas applications in Teton National Park and Jackson, Wyoming, and studying ethanol use in Yellowstone National Park and gateway cities in Montana. With further development, the system could be used to assist decision-makers (local government, planners, vehicle purchasers, and fuel suppliers) in selecting alternative fuels, vehicles, and developing AF infrastructures. The system could become a regional AF market assessment tool that could help decision-makers understand the behavior of the AF market and conditions in which the market would grow. Based on this high level market assessment, investors and decision-makers would become more knowledgeable of the AF market opportunity before developing detailed plans and preparing financial analysis.

  17. Towards decision support for waiting lists: an operations management view.

    Science.gov (United States)

    Vissers, J M; Van Der Bij, J D; Kusters, R J

    2001-06-01

    This paper considers the phenomenon of waiting lists in a healthcare setting, which is characterised by limitations on the national expenditure, to explore the potentials of an operations management perspective. A reference framework for waiting list management is described, distinguishing different levels of planning in healthcare--national, regional, hospital and process--that each contributes to the existence of waiting lists through managerial decision making. In addition, different underlying mechanisms in demand and supply are distinguished, which together explain the development of waiting lists. It is our contention that within this framework a series of situation specific models should be designed to support communication and decision making. This is illustrated by the modelling of the demand for cataract treatment in a regional setting in the south-eastern part of the Netherlands. An input-output model was developed to support decisions regarding waiting lists. The model projects the demand for treatment at a regional level and makes it possible to evaluate waiting list impacts for different scenarios to meet this demand.

  18. Designing an Information System for Decision Support Lending

    Directory of Open Access Journals (Sweden)

    Adrian LUPASC

    2017-04-01

    Full Text Available The successful development of financial and banking activities requires a strong information support to ensure the competitive edge over the other competitors on the market. The exponential growth in the volume of lending financial operations made the use of modern information technology in banking has become fundamental to improving lending activity. Thus, the design and use of a computer system adapted to specific requirements of bank lending will provide opportunities to diversify and modernize the procedures for granting, repayment and credit guarantee to correlate products offer credit demands and customer needs. In this regard, the related objectives of this work are oriented to emphasize the positive impact of the adoption of modern information technologies in decision making in the banking field. The proposed objectives are justified by presenting solutions support system of credit decision which aims to automate ongoing operations specific to a banking allowing bank clerks to process a large number of loan applications in a time very short and to the right decisions and substantiated.

  19. Experiential Knowledge Complements an LCA-Based Decision Support Framework

    Directory of Open Access Journals (Sweden)

    Heng Yi Teah

    2015-09-01

    Full Text Available A shrimp farmer in Taiwan practices innovation through trial-and-error for better income and a better environment, but such farmer-based innovation sometimes fails because the biological mechanism is unclear. Systematic field experimentation and laboratory research are often too costly, and simulating ground conditions is often too challenging. To solve this dilemma, we propose a decision support framework that explicitly utilizes farmer experiential knowledge through a participatory approach to alternatively estimate prospective change in shrimp farming productivity, and to co-design options for improvement. Data obtained from the farmer enable us to quantitatively analyze the production cost and greenhouse gas (GHG emission with a life cycle assessment (LCA methodology. We used semi-quantitative graphical representations of indifference curves and mixing triangles to compare and show better options for the farmer. Our results empower the farmer to make decisions more systematically and reliably based on the frequency of heterotrophic bacteria application and the revision of feed input. We argue that experiential knowledge may be less accurate due to its dependence on varying levels of farmer experience, but this knowledge is a reasonable alternative for immediate decision-making. More importantly, our developed framework advances the scope of LCA application to support practically important yet scientifically uncertain cases.

  20. Decision support for integrated water-energy planning.

    Energy Technology Data Exchange (ETDEWEB)

    Tidwell, Vincent Carroll; Malczynski, Leonard A.; Kobos, Peter Holmes; Castillo, Cesar; Hart, William Eugene; Klise, Geoffrey T.

    2009-10-01

    Currently, electrical power generation uses about 140 billion gallons of water per day accounting for over 39% of all freshwater withdrawals thus competing with irrigated agriculture as the leading user of water. Coupled to this water use is the required pumping, conveyance, treatment, storage and distribution of the water which requires on average 3% of all electric power generated. While water and energy use are tightly coupled, planning and management of these fundamental resources are rarely treated in an integrated fashion. Toward this need, a decision support framework has been developed that targets the shared needs of energy and water producers, resource managers, regulators, and decision makers at the federal, state and local levels. The framework integrates analysis and optimization capabilities to identify trade-offs, and 'best' alternatives among a broad list of energy/water options and objectives. The decision support framework is formulated in a modular architecture, facilitating tailored analyses over different geographical regions and scales (e.g., national, state, county, watershed, NERC region). An interactive interface allows direct control of the model and access to real-time results displayed as charts, graphs and maps. Ultimately, this open and interactive modeling framework provides a tool for evaluating competing policy and technical options relevant to the energy-water nexus.

  1. WISE: Automated support for software project management and measurement. M.S. Thesis

    Science.gov (United States)

    Ramakrishnan, Sudhakar

    1995-01-01

    One important aspect of software development and IV&V is measurement. Unless a software development effort is measured in some way, it is difficult to judge the effectiveness of current efforts and predict future performances. Collection of metrics and adherence to a process are difficult tasks in a software project. Change activity is a powerful indicator of project status. Automated systems that can handle change requests, issues, and other process documents provide an excellent platform for tracking the status of the project. A World Wide Web based architecture is developed for (a) making metrics collection an implicit part of the software process, (b) providing metric analysis dynamically, (c) supporting automated tools that can complement current practices of in-process improvement, and (d) overcoming geographical barrier. An operational system (WISE) instantiates this architecture allowing for the improvement of software process in a realistic environment. The tool tracks issues in software development process, provides informal communication between the users with different roles, supports to-do lists (TDL), and helps in software process improvement. WISE minimizes the time devoted to metrics collection, analysis, and captures software change data. Automated tools like WISE focus on understanding and managing the software process. The goal is improvement through measurement.

  2. Penn State University ground software support for X-ray missions.

    Science.gov (United States)

    Townsley, L. K.; Nousek, J. A.; Corbet, R. H. D.

    1995-03-01

    The X-ray group at Penn State is charged with two software development efforts in support of X-ray satellite missions. As part of the ACIS instrument team for AXAF, the authors are developing part of the ground software to support the instrument's calibration. They are also designing a translation program for Ginga data, to change it from the non-standard FRF format, which closely parallels the original telemetry format, to FITS.

  3. Radiological emergency response for community agencies with cognitive task analysis, risk analysis, and decision support framework.

    Science.gov (United States)

    Meyer, Travis S; Muething, Joseph Z; Lima, Gustavo Amoras Souza; Torres, Breno Raemy Rangel; del Rosario, Trystyn Keia; Gomes, José Orlando; Lambert, James H

    2012-01-01

    Radiological nuclear emergency responders must be able to coordinate evacuation and relief efforts following the release of radioactive material into populated areas. In order to respond quickly and effectively to a nuclear emergency, high-level coordination is needed between a number of large, independent organizations, including police, military, hazmat, and transportation authorities. Given the complexity, scale, time-pressure, and potential negative consequences inherent in radiological emergency responses, tracking and communicating information that will assist decision makers during a crisis is crucial. The emergency response team at the Angra dos Reis nuclear power facility, located outside of Rio de Janeiro, Brazil, presently conducts emergency response simulations once every two years to prepare organizational leaders for real-life emergency situations. However, current exercises are conducted without the aid of electronic or software tools, resulting in possible cognitive overload and delays in decision-making. This paper describes the development of a decision support system employing systems methodologies, including cognitive task analysis and human-machine interface design. The decision support system can aid the coordination team by automating cognitive functions and improving information sharing. A prototype of the design will be evaluated by plant officials in Brazil and incorporated to a future trial run of a response simulation.

  4. Executable Behavioral Modeling of System and Software Architecture Specifications to Inform Resourcing Decisions

    Science.gov (United States)

    2016-09-01

    Infrastructure software projects: 1. The earliest phases or spiral cycles will generally involve prototyping, using the Application Composition model...case needs to achieve, expected results, post conditions, information about the environment, infrastructure to support execution of the tests, and...Leanpub, Feb. 5, 2016. [Online]. Available: http:// microservices -book.com/. Accessed Aug. 20, 2016. [59] M. Farah-Stapleton, M. Auguston, R. Madachy

  5. A model-referenced procedure to support adversarial decision processes

    International Nuclear Information System (INIS)

    Bunn, D.W.; Vlahos, K.

    1992-01-01

    In public enquiries concerning major facilities, such as the construction of a new electric power plant, it is observed that a useable decision model should be made commonly available alongside the open provision of data and assumptions. The protagonist, eg the electric utility, generally makes use of a complex, proprietary model for detailed evaluation of options. A simple emulator of this, based upon a regression analysis of numerous scenarios, and validated by further simulations is shown to be feasible and potentially attractive. It would be in the interests of the utility to make such a model-referenced decision support method generally available. The approach is considered in relation to the recent Hinkley Point C public enquiry for a new nuclear power plant in the UK. (Author)

  6. A public health decision support system model using reasoning methods.

    Science.gov (United States)

    Mera, Maritza; González, Carolina; Blobel, Bernd

    2015-01-01

    Public health programs must be based on the real health needs of the population. However, the design of efficient and effective public health programs is subject to availability of information that can allow users to identify, at the right time, the health issues that require special attention. The objective of this paper is to propose a case-based reasoning model for the support of decision-making in public health. The model integrates a decision-making process and case-based reasoning, reusing past experiences for promptly identifying new population health priorities. A prototype implementation of the model was performed, deploying the case-based reasoning framework jColibri. The proposed model contributes to solve problems found today when designing public health programs in Colombia. Current programs are developed under uncertain environments, as the underlying analyses are carried out on the basis of outdated and unreliable data.

  7. A Decision Support Framework for Automated Screening of Diabetic Retinopathy

    Directory of Open Access Journals (Sweden)

    2006-01-01

    Full Text Available The early signs of diabetic retinopathy (DR are depicted by microaneurysms among other signs. A prompt diagnosis when the disease is at the early stage can help prevent irreversible damages to the diabetic eye. In this paper, we propose a decision support system (DSS for automated screening of early signs of diabetic retinopathy. Classification schemes for deducing the presence or absence of DR are developed and tested. The detection rule is based on binary-hypothesis testing problem which simplifies the problem to yes/no decisions. An analysis of the performance of the Bayes optimality criteria applied to DR is also presented. The proposed DSS is evaluated on the real-world data. The results suggest that by biasing the classifier towards DR detection, it is possible to make the classifier achieve good sensitivity.

  8. Use of Remote Sensing for Decision Support in Africa

    Science.gov (United States)

    Policelli, Frederick S.

    2007-01-01

    Over the past 30 years, the scientific community has learned a great deal about the Earth as an integrated system. Much of this research has been enabled by the development of remote sensing technologies and their operation from space. Decision makers in many nations have begun to make use of remote sensing data for resource management, policy making, and sustainable development planning. This paper makes an attempt to provide a survey of the current state of the requirements and use of remote sensing for sustainable development in Africa. This activity has shown that there are not many climate data ready decision support tools already functioning in Africa. There are, however, endusers with known requirements who could benefit from remote sensing data.

  9. Online decision support system for surface irrigation management

    Science.gov (United States)

    Wang, Wenchao; Cui, Yuanlai

    2017-04-01

    Irrigation has played an important role in agricultural production. Irrigation decision support system is developed for irrigation water management, which can raise irrigation efficiency with few added engineering services. An online irrigation decision support system (OIDSS), in consist of in-field sensors and central computer system, is designed for surface irrigation management in large irrigation district. Many functions have acquired in OIDSS, such as data acquisition and detection, real-time irrigation forecast, water allocation decision and irrigation information management. The OIDSS contains four parts: Data acquisition terminals, Web server, Client browser and Communication system. Data acquisition terminals are designed to measure paddy water level, soil water content in dry land, ponds water level, underground water level, and canals water level. A web server is responsible for collecting meteorological data, weather forecast data, the real-time field data, and manager's feedback data. Water allocation decisions are made in the web server. Client browser is responsible for friendly displaying, interacting with managers, and collecting managers' irrigation intention. Communication system includes internet and the GPRS network used by monitoring stations. The OIDSS's model is based on water balance approach for both lowland paddy and upland crops. Considering basic database of different crops water demands in the whole growth stages and irrigation system engineering information, the OIDSS can make efficient decision of water allocation with the help of real-time field water detection and weather forecast. This system uses technical methods to reduce requirements of user's specialized knowledge and can also take user's managerial experience into account. As the system is developed by the Browser/Server model, it is possible to make full use of the internet resources, to facilitate users at any place where internet exists. The OIDSS has been applied in

  10. Fast Interactive Decision Support for Modifying Stowage Plans Using Binary Decision Diagrams

    DEFF Research Database (Denmark)

    Jensen, Rune Møller; Leknes, Eilif; Bebbington, Thomas

    Low cost containerized shipping requires high quality stowage plans. Scalable stowage planning optimization algorithms have been developed recently. All of these algorithms, however, produce monolithic solutions that are hard for stowage coordinators to modify, which is necessary in practice due ...... fast, complete, and backtrack-free decision support. Our computational results show that the approach can solve real-sized instances when breaking symmetries among similar containers...

  11. New Decision Support for Landslide and Other Disaster Events

    Science.gov (United States)

    Nair, U. S.; Keiser, K.; Wu, Y.; Kaulfus, A.; Srinivasan, K.; Anderson, E. R.; McEniry, M.

    2013-12-01

    An Event-Driven Data delivery (ED3) framework has been created that provides reusable services and configurations to support better data preparedness for decision support of disasters and other events by rapidly providing pre-planned access to data, special processing, modeling and other capabilities, all executed in response to criteria-based events. ED3 facilitates decision makers to plan in advance of disasters and other types of events for the data necessary for decisions and response activities. A layer of services provided in the ED3 framework allows systems to support user definition of subscriptions for data plans that will be triggered when events matching specified criteria occur. Pre-planning for data in response to events lessens the burden on decision makers in the aftermath of an event and allows planners to think through the desired processing for specialized data products. Additionally the ED3 framework provides support for listening for event alerts and support for multiple workflow managers that provide data and processing functionality in response to events. Landslides are often costly and, at times, deadly disaster events. Whereas intense and/or sustained rainfall is often the primary trigger for landslides, soil type and slope are also important factors in determining the location and timing of slope failure. Accounting for the substantial spatial variability of these factors is one of the major difficulties when predicting the timing and location of slope failures. A wireless sensor network (WSN), developed by NASA SERVIR and USRA, with peer-to-peer communication capability and low power consumption, is ideal for high spatial in situ monitoring in remote locations. In collaboration with the University of Huntsville at Alabama, WSN equipped with accelerometer, rainfall and soil moisture sensors is being integrated into an end-to-end landslide warning system. The WSN is being tested to ascertain communication capabilities and the density of

  12. Decision support for off-site emergency preparedness in Europe

    International Nuclear Information System (INIS)

    Kelly, G.N.; Ehrhardt, J.

    1996-01-01

    The decision support system, RODOS, for off-site emergency management in the event of a future accident is being developed with support from the European Commission. The development is being carried out within a large and fully integrated international project involving about forty institutes from sixteen countries in Eastern and Western Europe. RODOS has been designed to provide comprehensive (i.e. applicable at all distances, at all times and to all important countermeasures) decision support and to be applicable throughout Europe. The background to the development of RODOS is described in this paper together with its basic features, its current status and plans for its further development. Given the context of this Special Issue, particular attention is given to the contribution made by institutes in the former Soviet Union to the development of RODOS and plans for its implementation in these countries. The benefits of the system are increasingly being recognised following the completion of the pilot version in 1995. Of particular importance is its potential role as part of a wider European network, the existence of which would promote a more effective and coherent response to any future nuclear accident that might affect Europe. (Author)

  13. Decision support systems in nuclear emergencies: harmonizing domestic and reference tools

    International Nuclear Information System (INIS)

    Vamanu, D.; Mateescu, Gh.; Berinde, A.; Slavnicu, D.; Acasandrei, V.; Slavnicu, E.

    2001-01-01

    The paper addresses the issue of securing the compatibility and inter-operability of computer packages designed to perform as decision support tools in the management of radiological emergencies, over the transition times towards the implementation and uniform acceptance and uniform acceptance of internationally-shared reference tools such as the European Union's RODOS (Real Time On-Line Decision Support System for Off-Site Nuclear Emergencies in Europe). One submits that a harmonization between the currently operational, domestic, and the reference tool can be contemplated, based on extensive code comparison and benchmarking. A case in point is presented, paralleling selected RODOS applications on simulated abnormal nuclear events, and the concurrent application of a resident software package, NOTEPAD, developed to emulate RODOS-wise function at IFIH-HH Bucharest. The reproducible similarity may make domestic decision support system (DSS) facilities useful as both practical tools and factors promoting the emergency preparedness awareness, during the interim time laps till the full development and deployment of RODOS as a reference DSS in Europe. (authors)

  14. Science and Systems in Support of Multi-hazard Early Warnings and Decisions

    Science.gov (United States)

    Pulwarty, R. S.

    2015-12-01

    The demand for improved climate knowledge and information is well documented. As noted in the IPCC (SREX, AR5), the UNISDR Global Assessment Reports and other assessments, this demand has increased pressure for information to support planning under changing rates and emergence of multiple hazards including climate extremes (drought, heat waves, floods). "Decision support" is now a popular term in the climate applications research community. While existing decision support activities can be identified in many disparate settings (e.g. federal, academic, private), the challenge of changing environments (coupled physical and social) is actually one of crafting implementation strategies for improving decision quality (not just meeting "user needs"). This includes overcoming weaknesses in co-production models, moving beyond DSSs as simply "software", coordinating innovation mapping and diffusion, and providing fora and gaming tools to identify common interests and differences in the way risks are perceived and managed among the affected groups. We outline the development and evolution of multi-hazard early warning systems in the United States and elsewhere, focusing on climate-related hazards. In particular, the presentation will focus on the climate science and information needed for (1) improved monitoring and modeling, (2) generating risk profiles, (3) developing information systems and scenarios for critical thresholds, (4) the net benefits of using new information (5) characterizing and bridging the "last mile" in the context of longer-term risk management.

  15. Impact of generic substitution decision support on electronic prescribing behavior.

    Science.gov (United States)

    Stenner, Shane P; Chen, Qingxia; Johnson, Kevin B

    2010-01-01

    To evaluate the impact of generic substitution decision support on electronic (e-) prescribing of generic medications. The authors analyzed retrospective outpatient e-prescribing data from an academic medical center and affiliated network for July 1, 2005-September 30, 2008 using an interrupted time-series design to assess the rate of generic prescribing before and after implementing generic substitution decision support. To assess background secular trends, e-prescribing was compared with a concurrent random sample of hand-generated prescriptions. Proportion of generic medications prescribed before and after the intervention, evaluated over time, and compared with a sample of prescriptions generated without e-prescribing. The proportion of generic medication prescriptions increased from 32.1% to 54.2% after the intervention (22.1% increase, 95% CI 21.9% to 22.3%), with no diminution in magnitude of improvement post-intervention. In the concurrent control group, increases in proportion of generic prescriptions (29.3% to 31.4% to 37.4% in the pre-intervention, post-intervention, and end-of-study periods, respectively) were not commensurate with the intervention. There was a larger change in generic prescribing rates among authorized prescribers (24.6%) than nurses (18.5%; adjusted OR 1.38, 95% CI 1.17 to 1.63). Two years after the intervention, the proportion of generic prescribing remained significantly higher for e-prescriptions (58.1%; 95% CI 57.5% to 58.7%) than for hand-generated prescriptions ordered at the same time (37.4%; 95% CI 34.9% to 39.9%) (p<0.0001). Generic prescribing increased significantly in every specialty. Implementation of generic substitution decision support was associated with dramatic and sustained improvements in the rate of outpatient generic e-prescribing across all specialties.

  16. Decision support system in an international-voice-services business company

    Science.gov (United States)

    Hadianti, R.; Uttunggadewa, S.; Syamsuddin, M.; Soewono, E.

    2017-01-01

    We consider a problem facing by an international telecommunication services company in maximizing its profit. From voice services by controlling cost and business partnership. The competitiveness in this industry is very high, so that any efficiency from controlling cost and business partnership can help the company to survive in the very high competitiveness situation. The company trades voice traffic with a large number of business partners. There are four trading schemes that can be chosen by this company, namely, flat rate, class tiering, volume commitment, and revenue capped. Each scheme has a specific characteristic on the rate and volume deal, where the last three schemes are regarded as strategic schemes to be offered to business partner to ensure incoming traffic volume for both parties. This company and each business partner need to choose an optimal agreement in a certain period of time that can maximize the company’s profit. In this agreement, both parties agree to use a certain trading scheme, rate and rate/volume/revenue deal. A decision support system is then needed in order to give a comprehensive information to the sales officers to deal with the business partners. This paper discusses the mathematical model of the optimal decision for incoming traffic volume control, which is a part of the analysis needed to build the decision support system. The mathematical model is built by first performing data analysis to see how elastic the incoming traffic volume is. As the level of elasticity is obtained, we then derive a mathematical modelling that can simulate the impact of any decision on trading to the revenue of the company. The optimal decision can be obtained from these simulations results. To evaluate the performance of the proposed method we implement our decision model to the historical data. A software tool incorporating our methodology is currently in construction.

  17. Hydrologic Drought Decision Support System (HyDroDSS)

    Science.gov (United States)

    Granato, Gregory E.

    2014-01-01

    The hydrologic drought decision support system (HyDroDSS) was developed by the U.S. Geological Survey (USGS) in cooperation with the Rhode Island Water Resources Board (RIWRB) for use in the analysis of hydrologic variables that may indicate the risk for streamflows to be below user-defined flow targets at a designated site of interest, which is defined herein as data-collection site on a stream that may be adversely affected by pumping. Hydrologic drought is defined for this study as a period of lower than normal streamflows caused by precipitation deficits and (or) water withdrawals. The HyDroDSS is designed to provide water managers with risk-based information for balancing water-supply needs and aquatic-habitat protection goals to mitigate potential effects of hydrologic drought. This report describes the theory and methods for retrospective streamflow-depletion analysis, rank correlation analysis, and drought-projection analysis. All three methods are designed to inform decisions made by drought steering committees and decisionmakers on the basis of quantitative risk assessment. All three methods use estimates of unaltered streamflow, which is the measured or modeled flow without major withdrawals or discharges, to approximate a natural low-flow regime. Retrospective streamflow-depletion analysis can be used by water-resource managers to evaluate relations between withdrawal plans and the potential effects of withdrawal plans on streams at one or more sites of interest in an area. Retrospective streamflow-depletion analysis indicates the historical risk of being below user-defined flow targets if different pumping plans were implemented for the period of record. Retrospective streamflow-depletion analysis also indicates the risk for creating hydrologic drought conditions caused by use of a pumping plan. Retrospective streamflow-depletion analysis is done by calculating the net streamflow depletions from withdrawals and discharges and applying these depletions

  18. Harnessing the Frontline Employee Sensing of Capabilities for Decision Support

    DEFF Research Database (Denmark)

    Hallin, Carina Antonia; Andersen, Torben Juul; Tveterås, Sigbjørn

    2017-01-01

    The ability to sense developments in operational (steady-state) and dynamic (growth) capabilities provides early signals about how the firm adapts its operations to ongoing changes in the environment. Frontline employees engage in the daily transactions and sense the firm's operating conditions......, this article develops a sensing instrument an employee-sensed operational conduct (ESOC) index for updated information as an essential decision support mechanism. This sensing capacity is firm-specific and difficult to replicate once in place and thus can provide a basis for sustainable competitive advantage....

  19. A Decision Support Tool for Transient Stability Preventive Control

    DEFF Research Database (Denmark)

    Pertl, Michael; Weckesser, Johannes Tilman Gabriel; Rezkalla, Michel M.N.

    2017-01-01

    The paper presents a decision support tool for transient stability preventive control contributing to increased situation awareness of control room operators by providing additional information about the state of the power system in terms of transient stability. A time-domain approach is used...... a predefined minimum critical clearing time for faults at all buses is proposed, while costs are minimized. The results of the assessment are presented to the control room operator, who decides to accept the suggested dispatch or to repeat the assessment considering additional user-specific constraints...

  20. Artificial intelligence based decision support for trumpeter swan management

    Science.gov (United States)

    Sojda, Richard S.

    2002-01-01

    The number of trumpeter swans (Cygnus buccinator) breeding in the Tri-State area where Montana, Idaho, and Wyoming come together has declined to just a few hundred pairs. However, these birds are part of the Rocky Mountain Population which additionally has over 3,500 birds breeding in Alberta, British Columbia, Northwest Territories, and Yukon Territory. To a large degree, these birds seem to have abandoned traditional migratory pathways in the flyway. Waterfowl managers have been interested in decision support tools that would help them explore simulated management scenarios in their quest towards reaching population recovery and the reestablishment of traditional migratory pathways. I have developed a decision support system to assist biologists with such management, especially related to wetland ecology. Decision support systems use a combination of models, analytical techniques, and information retrieval to help develop and evaluate appropriate alternatives. Swan management is a domain that is ecologically complex, and this complexity is compounded by spatial and temporal issues. As such, swan management is an inherently distributed problem. Therefore, the ecological context for modeling swan movements in response to management actions was built as a multiagent system of interacting intelligent agents that implements a queuing model representing swan migration. These agents accessed ecological knowledge about swans, their habitats, and flyway management principles from three independent expert systems. The agents were autonomous, had some sensory capability, and could respond to changing conditions. A key problem when developing ecological decision support systems is empirically determining that the recommendations provided are valid. Because Rocky Mountain trumpeter swans have been surveyed for a long period of time, I was able to compare simulated distributions provided by the system with actual field observations across 20 areas for the period 1988

  1. A water management decision support system contributing to sustainability

    Science.gov (United States)

    Horváth, Klaudia; van Esch, Bart; Baayen, Jorn; Pothof, Ivo; Talsma, Jan; van Heeringen, Klaas-Jan

    2017-04-01

    Deltares and Eindhoven University of Technology are developing a new decision support system (DSS) for regional water authorities. In order to maintain water levels in the Dutch polder system, water should be drained and pumped out from the polders to the sea. The time and amount of pumping depends on the current sea level, the water level in the polder, the weather forecast and the electricity price forecast and possibly local renewable power production. This is a multivariable optimisation problem, where the goal is to keep the water level in the polder within certain bounds. By optimizing the operation of the pumps the energy usage and costs can be reduced, hence the operation of the regional water authorities can be more sustainable, while also anticipating on increasing share of renewables in the energy mix in a cost-effective way. The decision support system, based on Delft-FEWS as operational data-integration platform, is running an optimization model built in RTC-Tools 2, which is performing real-time optimization in order to calculate the pumping strategy. It is taking into account the present and future circumstances. As being the core of the real time decision support system, RTC-Tools 2 fulfils the key requirements to a DSS: it is fast, robust and always finds the optimal solution. These properties are associated with convex optimization. In such problems the global optimum can always be found. The challenge in the development is to maintain the convex formulation of all the non-linear components in the system, i.e. open channels, hydraulic structures, and pumps. The system is introduced through 4 pilot projects, one of which is a pilot of the Dutch Water Authority Rivierenland. This is a typical Dutch polder system: several polders are drained to the main water system, the Linge. The water from the Linge can be released to the main rivers that are subject to tidal fluctuations. In case of low tide, water can be released via the gates. In case of high

  2. Calculating Outcrossing Rates used in Decision Support Systems for Ships

    DEFF Research Database (Denmark)

    Nielsen, Ulrik Dam

    2008-01-01

    Onboard decision support systems (DSS) are used to increase the operational safety of ships. Ideally, DSS can estimate - in the statistical sense - future ship responses on a time scale of the order of 1-3 hours taking into account speed and course changes. The calculations depend on both...... analysis, and the paper derives and describes the main ideas. The concept is illustrated by an example, where the limit state of a non-linear ship response is considered. The results from the parallel system analysis are in agreement with corresponding Monte Carlo simulations. However, the computational...

  3. Knowledge-based dialogue in Intelligent Decision Support Systems

    International Nuclear Information System (INIS)

    Hollnagel, E.

    1987-01-01

    The overall goal for the design of Intelligent Decision Support Systems (IDSS) is to enhance understanding of the process under all operating conditions. For an IDSS to be effective, it must: select or generate the right information; produce reliable and consistent information; allow flexible and effective operator interaction; relate information presentation to current plant status and problems; and make the presentation at the right time. Several ongoing R and D programs try to design and build IDSSs. A particular example is the ESPRIT project Graphics and Knowledge Based Diaglogue for Dynamic Systems (GRADIENT). This project, the problems it addresses, and its uses, are discussed here

  4. Design of Graph Analysis Model to support Decision Making

    International Nuclear Information System (INIS)

    An, Sang Ha; Lee, Sung Jin; Chang, Soon Heung; Kim, Sung Ho; Kim, Tae Woon

    2005-01-01

    Korea is meeting the growing electric power needs by using nuclear, fissile, hydro energy and so on. But we can not use fissile energy forever, and the people's consideration about nature has been changed. So we have to prepare appropriate energy by the conditions before people need more energy. And we should prepare dynamic response because people's need would be changed as the time goes on. So we designed graphic analysis model (GAM) for the dynamic analysis of decision on the energy sources. It can support Analytic Hierarchy Process (AHP) analysis based on Graphic User Interface

  5. Radiological emergency assessment of local decision support system

    International Nuclear Information System (INIS)

    Breznik, B.; Kusar, A.; Boznar, M.Z.; Mlakar, P.

    2003-01-01

    Local decision support system has been developed based on the needs of Krsko Nuclear Power Plant for quick dose projection and it is one of important features required for proposal of intervention before actual release may occur. Radiological emergency assessment in the case of nuclear accident is based on plant status analysis, radiation monitoring data and on prediction of release of radioactive sources to the environment. There are possibilities to use automatic features to predict release source term and manual options for selection of release parameters. Advanced environmental modelling is used for assessment of atmospheric dispersion of radioactive contamination in the environment. (author)

  6. Automated Modular Magnetic Resonance Imaging Clinical Decision Support System (MIROR): An Application in Pediatric Cancer Diagnosis.

    Science.gov (United States)

    Zarinabad, Niloufar; Meeus, Emma M; Manias, Karen; Foster, Katharine; Peet, Andrew

    2018-05-02

    Advances in magnetic resonance imaging and the introduction of clinical decision support systems has underlined the need for an analysis tool to extract and analyze relevant information from magnetic resonance imaging data to aid decision making, prevent errors, and enhance health care. The aim of this study was to design and develop a modular medical image region of interest analysis tool and repository (MIROR) for automatic processing, classification, evaluation, and representation of advanced magnetic resonance imaging data. The clinical decision support system was developed and evaluated for diffusion-weighted imaging of body tumors in children (cohort of 48 children, with 37 malignant and 11 benign tumors). Mevislab software and Python have been used for the development of MIROR. Regions of interests were drawn around benign and malignant body tumors on different diffusion parametric maps, and extracted information was used to discriminate the malignant tumors from benign tumors. Using MIROR, the various histogram parameters derived for each tumor case when compared with the information in the repository provided additional information for tumor characterization and facilitated the discrimination between benign and malignant tumors. Clinical decision support system cross-validation showed high sensitivity and specificity in discriminating between these tumor groups using histogram parameters. MIROR, as a diagnostic tool and repository, allowed the interpretation and analysis of magnetic resonance imaging images to be more accessible and comprehensive for clinicians. It aims to increase clinicians' skillset by introducing newer techniques and up-to-date findings to their repertoire and make information from previous cases available to aid decision making. The modular-based format of the tool allows integration of analyses that are not readily available clinically and streamlines the future developments. ©Niloufar Zarinabad, Emma M Meeus, Karen Manias

  7. Decision support system for the operating room rescheduling problem.

    Science.gov (United States)

    van Essen, J Theresia; Hurink, Johann L; Hartholt, Woutske; van den Akker, Bernd J

    2012-12-01

    Due to surgery duration variability and arrivals of emergency surgeries, the planned Operating Room (OR) schedule is disrupted throughout the day which may lead to a change in the start time of the elective surgeries. These changes may result in undesirable situations for patients, wards or other involved departments, and therefore, the OR schedule has to be adjusted. In this paper, we develop a decision support system (DSS) which assists the OR manager in this decision by providing the three best adjusted OR schedules. The system considers the preferences of all involved stakeholders and only evaluates the OR schedules that satisfy the imposed resource constraints. The decision rules used for this system are based on a thorough analysis of the OR rescheduling problem. We model this problem as an Integer Linear Program (ILP) which objective is to minimize the deviation from the preferences of the considered stakeholders. By applying this ILP to instances from practice, we determined that the given preferences mainly lead to (i) shifting a surgery and (ii) scheduling a break between two surgeries. By using these changes in the DSS, the performed simulation study shows that less surgeries are canceled and patients and wards are more satisfied, but also that the perceived workload of several departments increases to compensate this. The system can also be used to judge the acceptability of a proposed initial OR schedule.

  8. A Mashup Application to Support Complex Decision Making for Retail Consumers

    OpenAIRE

    Steven Walczak; Deborah L. Kellogg; Dawn G. Gregg

    2010-01-01

    Purchase processes often require complex decision making and consumers frequently use Web information sources to support these decisions. However, increasing amounts of information can make finding appropriate information problematic. This information overload, coupled with decision complexity, can increase time required to make a decision and reduce decision quality. This creates a need for tools that support these decision-making processes. Online tools that bring together data and partial ...

  9. Evaluation of RxNorm for Medication Clinical Decision Support.

    Science.gov (United States)

    Freimuth, Robert R; Wix, Kelly; Zhu, Qian; Siska, Mark; Chute, Christopher G

    2014-01-01

    We evaluated the potential use of RxNorm to provide standardized representations of generic drug name and route of administration to facilitate management of drug lists for clinical decision support (CDS) rules. We found a clear representation of generic drug name but not route of administration. We identified several issues related to data quality, including erroneous or missing defined relationships, and the use of different concept hierarchies to represent the same drug. More importantly, we found extensive semantic precoordination of orthogonal concepts related to route and dose form, which would complicate the use of RxNorm for drug-based CDS. This study demonstrated that while RxNorm is a valuable resource for the standardization of medications used in clinical practice, additional work is required to enhance the terminology so that it can support expanded use cases, such as managing drug lists for CDS.

  10. Cyberinfrastructure for the collaborative development of U2U decision support tools

    Directory of Open Access Journals (Sweden)

    Larry L. Biehl

    2017-01-01

    Full Text Available This paper describes the use of cyberinfrastructure to create interactive applications as part of the Useful to Usable (U2U project. These applications transform historical climate data, knowledge, and models into decision support tools for end users such as crop farmers, university Extension educators, and other agricultural advisors. In creating a cyberinfrastructure to support the U2U project, four major challenges have been addressed: designing and developing highly usable web applications with frequent feedback, establishing a software engineering environment to support iterative development, integrating and synthesizing historical and current datasets from a variety of sources (local vs. remote, different access methods, and formats, and supporting project collaboration needs of data and document sharing, project management, and public outreach. The overall goals of the cyberinfrastructure and its architecture design are described. Methods for data retrieval and synthesis, as well as the various software components utilized are discussed. The development and integration of tools into the collaborative HUBzero framework are highlighted, including the use of HUBzero’s core features to share ideas, algorithms, and results. A highly iterative development process that includes feedback from experts and end-users to feed requirement definition, design and application updates are also examined.

  11. Real-Time Clinical Decision Support Decreases Inappropriate Plasma Transfusion.

    Science.gov (United States)

    Shah, Neil; Baker, Steven A; Spain, David; Shieh, Lisa; Shepard, John; Hadhazy, Eric; Maggio, Paul; Goodnough, Lawrence T

    2017-08-01

    To curtail inappropriate plasma transfusions, we instituted clinical decision support as an alert upon order entry if the patient's recent international normalized ratio (INR) was 1.7 or less. The alert was suppressed for massive transfusion and within operative or apheresis settings. The plasma order was automatically removed upon alert acceptance while clinical exception reasons allowed for continued transfusion. Alert impact was studied comparing a 7-month control period with a 4-month intervention period. Monthly plasma utilization decreased 17.4%, from a mean ± SD of 3.40 ± 0.48 to 2.82 ± 0.6 plasma units per hundred patient days (95% confidence interval [CI] of difference, -0.1 to 1.3). Plasma transfused below an INR of 1.7 or less decreased from 47.6% to 41.6% (P = .0002; odds ratio, 0.78; 95% CI, 0.69-0.89). The alert recommendation was accepted 33% of the time while clinical exceptions were chosen in the remaining cases (active bleeding, 31%; other clinical indication, 33%; and apheresis, 2%). Alert acceptance rate varied significantly among different provider specialties. Clinical decision support can help curtail inappropriate plasma use but needs to be part of a comprehensive strategy including audit and feedback for comprehensive, long-term changes. © American Society for Clinical Pathology, 2017. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com

  12. Comparing decision-support systems in adopting sustainable intensification criteria

    Directory of Open Access Journals (Sweden)

    Bouda eVosough Ahmadi

    2015-02-01

    Full Text Available Sustainable intensification (SI is a multifaceted concept incorporating the ambition to increase or maintain the current level of agricultural yields while reduce negative ecological and environmental impacts. Decision-support systems (DSS that use integrated analytical methods are often used to support decision making processes in agriculture. However, DSS often consist of set of values, objectives and assumptions that may be inconsistent or in conflict with merits and objectives of SI. These potential conflicts will have consequences for adoption and up-take of agricultural research, technologies and related policies and regulations such as genetic technology in pursuit of SI. This perspective paper aimed at comparing a number of frequently used socio-economic DSS with respect to their capacity in incorporating various dimensions of SI, and discussing their application to analyzing farm animal genetic resources (FAnGR policies. The case of FAnGR policies was chosen because of its great potential in delivering merits of SI. It was concluded that flexible DSS, with great integration capacity with various natural and social sciences, are needed to provide guidance on feasibility, practicality and policy implementation for SI.

  13. Combining morphological analysis and Bayesian networks for strategic decision support

    Directory of Open Access Journals (Sweden)

    A de Waal

    2007-12-01

    Full Text Available Morphological analysis (MA and Bayesian networks (BN are two closely related modelling methods, each of which has its advantages and disadvantages for strategic decision support modelling. MA is a method for defining, linking and evaluating problem spaces. BNs are graphical models which consist of a qualitative and quantitative part. The qualitative part is a cause-and-effect, or causal graph. The quantitative part depicts the strength of the causal relationships between variables. Combining MA and BN, as two phases in a modelling process, allows us to gain the benefits of both of these methods. The strength of MA lies in defining, linking and internally evaluating the parameters of problem spaces and BN modelling allows for the definition and quantification of causal relationships between variables. Short summaries of MA and BN are provided in this paper, followed by discussions how these two computer aided methods may be combined to better facilitate modelling procedures. A simple example is presented, concerning a recent application in the field of environmental decision support.

  14. A Decision Support System for Preventing Falls in Elderly People

    Directory of Open Access Journals (Sweden)

    Estelle Courtial

    2015-12-01

    Full Text Available Preventing falls in older people is a real challenge for Public Health. This paper addresses this issue by designing a decision support system which provides a fall risk index. The proposed approach is based on three selected tests (the Timed up and go (TUG, the 30s sit-to-stand and the 4-stage balance tests, which are widely used in the medical sector for assessing mobility and balance of the elderly. During the tests, a video records the older person performing the test and thanks to an image processing algorithm, kinematics and biomechanics parameters are extracted. Based on fuzzy logic, a decision support system fuses all these data and estimates a fall risk index according to the senior's age and gender. It can also assist the Health Professional in making improved medical diagnosis relied on targeted measurements. Simulation results drawing on experimental data of 12 older persons performing the TUG test illustrate the feasibility and the effectiveness of the proposed approach. Objectively assessing the senior's motor functions and the fall risk is possible in less than 10 minutes, at low cost and in an easy and non invasive way.

  15. Integrated Decision Support for Global Environmental Change Adaptation

    Science.gov (United States)

    Kumar, S.; Cantrell, S.; Higgins, G. J.; Marshall, J.; VanWijngaarden, F.

    2011-12-01

    Environmental changes are happening now that has caused concern in many parts of the world; particularly vulnerable are the countries and communities with limited resources and with natural environments that are more susceptible to climate change impacts. Global leaders are concerned about the observed phenomena and events such as Amazon deforestation, shifting monsoon patterns affecting agriculture in the mountain slopes of Peru, floods in Pakistan, water shortages in Middle East, droughts impacting water supplies and wildlife migration in Africa, and sea level rise impacts on low lying coastal communities in Bangladesh. These environmental changes are likely to get exacerbated as the temperatures rise, the weather and climate patterns change, and sea level rise continues. Large populations and billions of dollars of infrastructure could be affected. At Northrop Grumman, we have developed an integrated decision support framework for providing necessary information to stakeholders and planners to adapt to the impacts of climate variability and change at the regional and local levels. This integrated approach takes into account assimilation and exploitation of large and disparate weather and climate data sets, regional downscaling (dynamic and statistical), uncertainty quantification and reduction, and a synthesis of scientific data with demographic and economic data to generate actionable information for the stakeholders and decision makers. Utilizing a flexible service oriented architecture and state-of-the-art visualization techniques, this information can be delivered via tailored GIS portals to meet diverse set of user needs and expectations. This integrated approach can be applied to regional and local risk assessments, predictions and decadal projections, and proactive adaptation planning for vulnerable communities. In this paper we will describe this comprehensive decision support approach with selected applications and case studies to illustrate how this

  16. Decision support system for the diagnosis of schizophrenia disorders

    Directory of Open Access Journals (Sweden)

    D. Razzouk

    2006-01-01

    Full Text Available Clinical decision support systems are useful tools for assisting physicians to diagnose complex illnesses. Schizophrenia is a complex, heterogeneous and incapacitating mental disorder that should be detected as early as possible to avoid a most serious outcome. These artificial intelligence systems might be useful in the early detection of schizophrenia disorder. The objective of the present study was to describe the development of such a clinical decision support system for the diagnosis of schizophrenia spectrum disorders (SADDESQ. The development of this system is described in four stages: knowledge acquisition, knowledge organization, the development of a computer-assisted model, and the evaluation of the system's performance. The knowledge was extracted from an expert through open interviews. These interviews aimed to explore the expert's diagnostic decision-making process for the diagnosis of schizophrenia. A graph methodology was employed to identify the elements involved in the reasoning process. Knowledge was first organized and modeled by means of algorithms and then transferred to a computational model created by the covering approach. The performance assessment involved the comparison of the diagnoses of 38 clinical vignettes between an expert and the SADDESQ. The results showed a relatively low rate of misclassification (18-34% and a good performance by SADDESQ in the diagnosis of schizophrenia, with an accuracy of 66-82%. The accuracy was higher when schizophreniform disorder was considered as the presence of schizophrenia disorder. Although these results are preliminary, the SADDESQ has exhibited a satisfactory performance, which needs to be further evaluated within a clinical setting.

  17. Software to support planning for future waste treatment, storage, transport, and disposal requirements

    International Nuclear Information System (INIS)

    Holter, G.M.; Shay, M.R.; Stiles, D.L.

    1990-04-01

    Planning for adequate and appropriate treatment, storage, transport and disposal of wastes to be generated or received in the future is a complex but critical task that can be significantly enhanced by the development and use of appropriate software. This paper describes a software system that has been developed at Pacific Northwest Laboratory to aid in such planning. The basic needs for such a system are outlined, and the approach adopted in developing the software is described. The individual components of the system, and their integration into a unified system, are discussed. Typical analytical applications of this type of software are summarized. Conclusions concerning the development of such software systems and the necessary supporting data are then presented. 2 figs

  18. A CONCEPT OF SOFTWARE SUPPORT OF LEARNING PROGRAMMING LANGUAGE AND TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    V. Kruglyk

    2013-03-01

    Full Text Available A concept of software support of learning programming language and technologies is regarded in the article. Present systems of independent study of subjects, related to programming, are examined. Necessary components of a system of support learning programming languages and technologies, which is oriented on independent study, are considered.

  19. Horizontal Allocation of Decision Rights for On-Premise Applications and Software-as-a-Service

    DEFF Research Database (Denmark)

    Winkler, Till; Brown, Carol V.

    2014-01-01

    This study addresses a major gap in our knowledge about the allocation of information technology (IT) decision rights between business and IT units at the application level, including the governance of applications delivered on-premise versus those delivered with a software-as-a-service (SaaS......) model. Building on the findings from a multicase qualitative study of organizations that had adopted the same SaaS application, we draw on three theoretical lenses (agency theory, transaction cost economics, and knowledge-based view) to develop a theoretically grounded model with three organization......-level factors, three application-level factors, and application-level IT governance. Hypotheses derived from the model, as well as a set of differential hypotheses about factor influences due to on-premise versus SaaS delivery, are tested with survey responses from 207 firms in which application...

  20. Using basic geographic information systems functionality to support sustainable forest management decision making and post-decision assessments

    Science.gov (United States)

    Ronald E. McRoberts; R. James Barbour; Krista M. Gebert; Greg C. Liknes; Mark D. Nelson; Dacia M. Meneguzzo; et al.

    2006-01-01

    Sustainable management of natural resources requires informed decision making and post-decision assessments of the results of those decisions. Increasingly, both activities rely on analyses of spatial data in the forms of maps and digital data layers. Fortunately, a variety of supporting maps and data layers rapidly are becoming available. Unfortunately, however, user-...