WorldWideScience

Sample records for dcga based evaluating

  1. Studying influence of two effective parameters on network losses in transmission expansion planning using DCGA

    International Nuclear Information System (INIS)

    Shayeghi, H.; Jalilzadeh, S.; Mahdavi, M.; Hadadian, H.

    2008-01-01

    Transmission network expansion planning (TNEP) is a basic part of power network planning that determines where, when and how many new transmission lines should be added to the network. Its task is to minimize the network construction and operational cost, while meeting imposed technical, economic and reliability constraints. Up till now, various methods have been proposed for solution of the static transmission network expansion planning (STNEP) problem. But, in all of them, the effect of two important parameters i.e., inflation rate and load growth factor on network losses has not been investigated. Thus, in this paper, STNEP is being studied considering the effect of inflation rate and load growth factor on the network losses in a transmission network with different voltage levels using a decimal codification genetic algorithm (DCGA). The effectiveness of the proposed idea is tested on the Garver's six-bus network. The results evaluation reveals that the inflation rate and load growth factor have important effect on the network losses and subsequent network arrangement. In addition, considering the effect of two above-mentioned parameters (inflation rate and load growth factor) in expansion planning of transmission networks with various line voltage levels is caused that the total expansion cost of the network (expansion costs and the operational cost) is calculated more exactly and therefore the network satisfies the requirements of delivering electric power more safely and reliably to load centers

  2. Discrete PSO algorithm based optimization of transmission lines loading in TNEP problem

    International Nuclear Information System (INIS)

    Shayeghi, H.; Mahdavi, M.; Bagheri, A.

    2010-01-01

    Transmission network expansion planning (TNEP) is a basic part of power system planning that determines where, when and how many new transmission lines should be added to the network. Up till now, various methods have been presented to solve the static transmission network expansion planning (STNEP) problem. But in all of these methods, lines adequacy rate has not been considered at the end of planning horizon, i.e. expanded network misses adequacy after some times and needs to be expanded again. In this paper, expansion planning has been implemented by merging lines loading parameter in the STNEP and inserting investment cost into the fitness function constraints using discrete particle swarm optimization (DPSO) algorithm. Expanded network will possess a maximum adequacy to provide load demand and also the transmission lines overloaded later. The proposed idea has been tested on the Garvers network and an actual transmission network of the Azerbaijan regional electric company, Iran, and the results are compared with the decimal codification genetic algorithm (DCGA) technique. The results evaluation shows that the network will possess maximum efficiency economically. Also, it is shown that precision and convergence speed of the proposed DPSO based method for the solution of the STNEP problem is superior to DCGA approach.

  3. Diversity Controlling Genetic Algorithm for Order Acceptance and Scheduling Problem

    Directory of Open Access Journals (Sweden)

    Cheng Chen

    2014-01-01

    Full Text Available Selection and scheduling are an important topic in production systems. To tackle the order acceptance and scheduling problem on a single machine with release dates, tardiness penalty, and sequence-dependent setup times, in this paper a diversity controlling genetic algorithm (DCGA is proposed, in which a diversified population is maintained during the whole search process through survival selection considering both the fitness and the diversity of individuals. To measure the similarity between individuals, a modified Hamming distance without considering the unaccepted orders in the chromosome is adopted. The proposed DCGA was validated on 1500 benchmark instances with up to 100 orders. Compared with the state-of-the-art algorithms, the experimental results show that DCGA improves the solution quality obtained significantly, in terms of the deviation from upper bound.

  4. Smartphone-based evaluations of clinical placements—a useful complement to web-based evaluation tools

    Directory of Open Access Journals (Sweden)

    Jesper Hessius

    2015-11-01

    Full Text Available Purpose: Web-based questionnaires are currently the standard method for course evaluations. The high rate of smartphone adoption in Sweden makes possible a range of new uses, including course evaluation. This study examines the potential advantages and disadvantages of using a smartphone app as a complement to web-based course evaluationsystems. Methods: An iPhone app for course evaluations was developed and interfaced to an existing web-based tool. Evaluations submitted using the app were compared with those submitted using the web between August 2012 and June 2013, at the Faculty of Medicine at Uppsala University, Sweden. Results: At the time of the study, 49% of the students were judged to own iPhones. Over the course of the study, 3,340 evaluations were submitted, of which 22.8% were submitted using the app. The median of mean scores in the submitted evaluations was 4.50 for the app (with an interquartile range of 3.70-5.20 and 4.60 (3.70-5.20 for the web (P=0.24. The proportion of evaluations that included a free-text comment was 50.5% for the app and 49.9% for the web (P=0.80. Conclusion: An app introduced as a complement to a web-based course evaluation system met with rapid adoption. We found no difference in the frequency of free-text comments or in the evaluation scores. Apps appear to be promising tools for course evaluations. web-based course evaluation system met with rapid adoption. We found no difference in the frequency of free-text comments or in the evaluation scores. Apps appear to be promising tools for course evaluations.

  5. Smartphone-based evaluations of clinical placements-a useful complement to web-based evaluation tools.

    Science.gov (United States)

    Hessius, Jesper; Johansson, Jakob

    2015-01-01

    Web-based questionnaires are currently the standard method for course evaluations. The high rate of smartphone adoption in Sweden makes possible a range of new uses, including course evaluation. This study examines the potential advantages and disadvantages of using a smartphone app as a complement to web-based course evaluationsystems. An iPhone app for course evaluations was developed and interfaced to an existing web-based tool. Evaluations submitted using the app were compared with those submitted using the web between August 2012 and June 2013, at the Faculty of Medicine at Uppsala University, Sweden. At the time of the study, 49% of the students were judged to own iPhones. Over the course of the study, 3,340 evaluations were submitted, of which 22.8% were submitted using the app. The median of mean scores in the submitted evaluations was 4.50 for the app (with an interquartile range of 3.70-5.20) and 4.60 (3.70-5.20) for the web (P=0.24). The proportion of evaluations that included a free-text comment was 50.5% for the app and 49.9% for the web (P=0.80). An app introduced as a complement to a web-based course evaluation system met with rapid adoption. We found no difference in the frequency of free-text comments or in the evaluation scores. Apps appear to be promising tools for course evaluations. web-based course evaluation system met with rapid adoption. We found no difference in the frequency of free-text comments or in the evaluation scores. Apps appear to be promising tools for course evaluations.

  6. Theory-Based Stakeholder Evaluation

    Science.gov (United States)

    Hansen, Morten Balle; Vedung, Evert

    2010-01-01

    This article introduces a new approach to program theory evaluation called theory-based stakeholder evaluation or the TSE model for short. Most theory-based approaches are program theory driven and some are stakeholder oriented as well. Practically, all of the latter fuse the program perceptions of the various stakeholder groups into one unitary…

  7. Building a community-based culture of evaluation.

    Science.gov (United States)

    Janzen, Rich; Ochocka, Joanna; Turner, Leanne; Cook, Tabitha; Franklin, Michelle; Deichert, Debbie

    2017-12-01

    In this article we argue for a community-based approach as a means of promoting a culture of evaluation. We do this by linking two bodies of knowledge - the 70-year theoretical tradition of community-based research and the trans-discipline of program evaluation - that are seldom intersected within the evaluation capacity building literature. We use the three hallmarks of a community-based research approach (community-determined; equitable participation; action and change) as a conceptual lens to reflect on a case example of an evaluation capacity building program led by the Ontario Brian Institute. This program involved two community-based groups (Epilepsy Southwestern Ontarioand the South West Alzheimer Society Alliance) who were supported by evaluators from the Centre for Community Based Research to conduct their own internal evaluation. The article provides an overview of a community-based research approach and its link to evaluation. It then describes the featured evaluation capacity building initiative, including reflections by the participating organizations themselves. We end by discussing lessons learned and their implications for future evaluation capacity building. Our main argument is that organizations that strive towards a community-based approach to evaluation are well placed to build and sustain a culture of evaluation. Copyright © 2017 Elsevier Ltd. All rights reserved.

  8. Combining Internal and External Evaluation: A Case for School-Based Evaluation.

    Science.gov (United States)

    Nevo, David

    1994-01-01

    School-based evaluation, the focus of this article, is conceived of as neither a synonym for internal evaluation nor an antonym for external evaluation, but as a combination that is examined through a review of recent research. A school-based evaluation in Israel illustrates combining these approaches in a complementary way. (SLD)

  9. Evaluating Computer-Based Assessment in a Risk-Based Model

    Science.gov (United States)

    Zakrzewski, Stan; Steven, Christine; Ricketts, Chris

    2009-01-01

    There are three purposes for evaluation: evaluation for action to aid the decision making process, evaluation for understanding to further enhance enlightenment and evaluation for control to ensure compliance to standards. This article argues that the primary function of evaluation in the "Catherine Wheel" computer-based assessment (CBA)…

  10. Evaluation as institution: a contractarian argument for needs-based economic evaluation.

    Science.gov (United States)

    Rogowski, Wolf H

    2018-06-13

    There is a gap between health economic evaluation methods and the value judgments of coverage decision makers, at least in Germany. Measuring preference satisfaction has been claimed to be inappropriate for allocating health care resources, e.g. because it disregards medical need. The existing methods oriented at medical need have been claimed to disregard non-consequentialist fairness concerns. The aim of this article is to propose a new, contractarian argument for justifying needs-based economic evaluation. It is based on consent rather than maximization of some impersonal unit of value to accommodate the fairness concerns. This conceptual paper draws upon contractarian ethics and constitution economics to show how economic evaluation can be viewed as an institution to overcome societal conflicts in the allocation of scarce health care resources. For this, the problem of allocating scarce health care resources in a society is reconstructed as a social dilemma. Both disadvantaged patients and affluent healthy individuals can be argued to share interests in a societal contract to provide technologies which ameliorate medical need, based on progressive funding. The use of needs-based economic evaluation methods for coverage determination can be interpreted as institutions for conflict resolution as far as they use consented criteria to ensure the social contract's sustainability and avoid implicit rationing or unaffordable contribution rates. This justifies the use of needs-based evaluation methods by Pareto-superiority and consent (rather than by some needs-based value function per se). The view of economic evaluation presented here may help account for fairness concerns in the further development of evaluation methods. This is because it directs the attention away from determining some unit of value to be maximized towards determining those persons who are most likely not to consent and meeting their concerns. Following this direction in methods development is

  11. Risk-based Regulatory Evaluation Program methodology

    International Nuclear Information System (INIS)

    DuCharme, A.R.; Sanders, G.A.; Carlson, D.D.; Asselin, S.V.

    1987-01-01

    The objectives of this DOE-supported Regulatory Evaluation Progrwam are to analyze and evaluate the safety importance and economic significance of existing regulatory guidance in order to assist in the improvement of the regulatory process for current generation and future design reactors. A risk-based cost-benefit methodology was developed to evaluate the safety benefit and cost of specific regulations or Standard Review Plan sections. Risk-based methods can be used in lieu of or in combination with deterministic methods in developing regulatory requirements and reaching regulatory decisions

  12. Evaluation of computer-based ultrasonic inservice inspection systems

    International Nuclear Information System (INIS)

    Harris, R.V. Jr.; Angel, L.J.; Doctor, S.R.; Park, W.R.; Schuster, G.J.; Taylor, T.T.

    1994-03-01

    This report presents the principles, practices, terminology, and technology of computer-based ultrasonic testing for inservice inspection (UT/ISI) of nuclear power plants, with extensive use of drawings, diagrams, and LTT images. The presentation is technical but assumes limited specific knowledge of ultrasonics or computers. The report is divided into 9 sections covering conventional LTT, computer-based LTT, and evaluation methodology. Conventional LTT topics include coordinate axes, scanning, instrument operation, RF and video signals, and A-, B-, and C-scans. Computer-based topics include sampling, digitization, signal analysis, image presentation, SAFI, ultrasonic holography, transducer arrays, and data interpretation. An evaluation methodology for computer-based LTT/ISI systems is presented, including questions, detailed procedures, and test block designs. Brief evaluations of several computer-based LTT/ISI systems are given; supplementary volumes will provide detailed evaluations of selected systems

  13. Performance-Based Evaluation and School Librarians

    Science.gov (United States)

    Church, Audrey P.

    2015-01-01

    Evaluation of instructional personnel is standard procedure in our Pre-K-12 public schools, and its purpose is to document educator effectiveness. With Race to the Top and No Child Left Behind waivers, states are required to implement performance-based evaluations that demonstrate student academic progress. This three-year study describes the…

  14. Evaluating Emulation-based Models of Distributed Computing Systems

    Energy Technology Data Exchange (ETDEWEB)

    Jones, Stephen T. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Cyber Initiatives; Gabert, Kasimir G. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Cyber Initiatives; Tarman, Thomas D. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Emulytics Initiatives

    2017-08-01

    Emulation-based models of distributed computing systems are collections of virtual ma- chines, virtual networks, and other emulation components configured to stand in for oper- ational systems when performing experimental science, training, analysis of design alterna- tives, test and evaluation, or idea generation. As with any tool, we should carefully evaluate whether our uses of emulation-based models are appropriate and justified. Otherwise, we run the risk of using a model incorrectly and creating meaningless results. The variety of uses of emulation-based models each have their own goals and deserve thoughtful evaluation. In this paper, we enumerate some of these uses and describe approaches that one can take to build an evidence-based case that a use of an emulation-based model is credible. Predictive uses of emulation-based models, where we expect a model to tell us something true about the real world, set the bar especially high and the principal evaluation method, called validation , is comensurately rigorous. We spend the majority of our time describing and demonstrating the validation of a simple predictive model using a well-established methodology inherited from decades of development in the compuational science and engineering community.

  15. Internet-based peer support for Ménière's disease: a summary of web-based data collection, impact evaluation, and user evaluation.

    Science.gov (United States)

    Pyykkő, Ilmari; Manchaiah, Vinaya; Levo, Hilla; Kentala, Erna; Juhola, Martti

    2017-07-01

    This paper presents a summary of web-based data collection, impact evaluation, and user evaluations of an Internet-based peer support program for Ménière's disease (MD). The program is written in html-form. The data are stored in a MySQL database and uses machine learning in the diagnosis of MD. The program works interactively with the user and assesses the participant's disorder profile in various dimensions (i.e., symptoms, impact, personal traits, and positive attitude). The inference engine uses a database to compare the impact with 50 referents, and provides regular feedback to the user. Data were analysed using descriptive statistics and regression analysis. The impact evaluation was based on 740 cases and the user evaluation on a sample of 75 cases of MD respectively. The web-based system was useful in data collection and impact evaluation of people with MD. Among those with a recent onset of MD, 78% rated the program as useful or very useful, whereas those with chronic MD rated the program 55%. We suggest that a web-based data collection and impact evaluation for peer support can be helpful while formulating the rehabilitation goals of building the self-confidence needed for coping and increasing social participation.

  16. Research on Livable Community Evaluation Based on GIS

    Science.gov (United States)

    Yin, Zhangcai; Wu, Yang; Jin, Zhanghaonan; Zhang, Xu

    2018-01-01

    Community is the basic unit of the city. Research on livable community could provide a bottom-up research path for the realization of livable city. Livability is the total factor affecting the quality of community life. In this paper, livable community evaluation indexes are evaluated based on GIS and fuzzy comprehensive evaluation method. Then the sum-index and sub-index of community livability are both calculated. And community livable evaluation index system is constructed based on the platform of GIS. This study provides theoretical support for the construction and management of livable communities, so as to guide the development and optimization of city.

  17. Fuzzy comprehensive evaluation model of interuniversity collaborative learning based on network

    Science.gov (United States)

    Wenhui, Ma; Yu, Wang

    2017-06-01

    Learning evaluation is an effective method, which plays an important role in the network education evaluation system. But most of the current network learning evaluation methods still use traditional university education evaluation system, which do not take into account of web-based learning characteristics, and they are difficult to fit the rapid development of interuniversity collaborative learning based on network. Fuzzy comprehensive evaluation method is used to evaluate interuniversity collaborative learning based on the combination of fuzzy theory and analytic hierarchy process. Analytic hierarchy process is used to determine the weight of evaluation factors of each layer and to carry out the consistency check. According to the fuzzy comprehensive evaluation method, we establish interuniversity collaborative learning evaluation mathematical model. The proposed scheme provides a new thought for interuniversity collaborative learning evaluation based on network.

  18. Fuzzy comprehensive evaluation model of interuniversity collaborative learning based on network

    Directory of Open Access Journals (Sweden)

    Wenhui Ma

    2017-06-01

    Full Text Available Learning evaluation is an effective method, which plays an important role in the network education evaluation system. But most of the current network learning evaluation methods still use traditional university education evaluation system, which do not take into account of web-based learning characteristics, and they are difficult to fit the rapid development of interuniversity collaborative learning based on network. Fuzzy comprehensive evaluation method is used to evaluate interuniversity collaborative learning based on the combination of fuzzy theory and analytic hierarchy process. Analytic hierarchy process is used to determine the weight of evaluation factors of each layer and to carry out the consistency check. According to the fuzzy comprehensive evaluation method, we establish interuniversity collaborative learning evaluation mathematical model. The proposed scheme provides a new thought for interuniversity collaborative learning evaluation based on network.

  19. MTA Computer Based Evaluation System.

    Science.gov (United States)

    Brenner, Lisa P.; And Others

    The MTA PLATO-based evaluation system, which has been implemented by a consortium of schools of medical technology, is designed to be general-purpose, modular, data-driven, and interactive, and to accommodate other national and local item banks. The system provides a comprehensive interactive item-banking system in conjunction with online student…

  20. Theory-Based Evaluation Meets Ambiguity

    DEFF Research Database (Denmark)

    Dahler-Larsen, Peter

    2017-01-01

    As theory-based evaluation (TBE) engages in situations where multiple stakeholders help develop complex program theory about dynamic phenomena in politically contested settings, it becomes difficult to develop and use program theory without ambiguity. The purpose of this article is to explore...... ambiguity as a fruitful perspective that helps TBE face current challenges. Literatures in organization theory and political theory are consulted in order to cultivate the concept of ambiguity. Janus variables (which work in two ways) and other ambiguous aspects of program theories are classified...... and exemplified. Stances towards ambiguity are considered, as are concrete steps that TBE evaluators can take to identify and deal with ambiguity in TBE....

  1. Evaluation of a Web-based Online Grant Application Review Solution

    Directory of Open Access Journals (Sweden)

    Marius Daniel PETRISOR

    2013-12-01

    Full Text Available This paper focuses on the evaluation of a web-based application used in grant application evaluations, software developed in our university, and underlines the need for simple solutions, based on recent technology, specifically tailored to one’s needs. We asked the reviewers to answer a short questionnaire, in order to assess their satisfaction with such a web-based grant application evaluation solution. All 20 reviewers accepted to answer the questionnaire, which contained 8 closed items (YES/NO answers related to reviewer’s previous experience in evaluating grant applications, previous use of such software solutions and his familiarity in using computer systems. The presented web-based application, evaluated by the users, shown a high level of acceptance and those respondents stated that they are willing to use such a solution in the future.

  2. Classification and Quality Evaluation of Tobacco Leaves Based on Image Processing and Fuzzy Comprehensive Evaluation

    Science.gov (United States)

    Zhang, Fan; Zhang, Xinhong

    2011-01-01

    Most of classification, quality evaluation or grading of the flue-cured tobacco leaves are manually operated, which relies on the judgmental experience of experts, and inevitably limited by personal, physical and environmental factors. The classification and the quality evaluation are therefore subjective and experientially based. In this paper, an automatic classification method of tobacco leaves based on the digital image processing and the fuzzy sets theory is presented. A grading system based on image processing techniques was developed for automatically inspecting and grading flue-cured tobacco leaves. This system uses machine vision for the extraction and analysis of color, size, shape and surface texture. Fuzzy comprehensive evaluation provides a high level of confidence in decision making based on the fuzzy logic. The neural network is used to estimate and forecast the membership function of the features of tobacco leaves in the fuzzy sets. The experimental results of the two-level fuzzy comprehensive evaluation (FCE) show that the accuracy rate of classification is about 94% for the trained tobacco leaves, and the accuracy rate of the non-trained tobacco leaves is about 72%. We believe that the fuzzy comprehensive evaluation is a viable way for the automatic classification and quality evaluation of the tobacco leaves. PMID:22163744

  3. PSA-based evaluation and rating of operational events

    International Nuclear Information System (INIS)

    Gomez Cobo, A.

    1997-01-01

    The presentation discusses the PSA-based evaluation and rating of operational events, including the following: historical background, procedures for event evaluation using PSA, use of PSA for event rating, current activities

  4. Usage-Based Collection Evaluation with a Curricular Focus

    Science.gov (United States)

    Kohn, Karen C.

    2013-01-01

    Systematic evaluation of a library's collection can be a useful tool for collection development. After reviewing three evaluation methods and their usefulness for our small academic library, I undertook a usage-based evaluation, focusing on narrow segments of our collection that served specific undergraduate courses. For each section, I collected…

  5. Usability Evaluation of a Web-Based Learning System

    Science.gov (United States)

    Nguyen, Thao

    2012-01-01

    The paper proposes a contingent, learner-centred usability evaluation method and a prototype tool of such systems. This is a new usability evaluation method for web-based learning systems using a set of empirically-supported usability factors and can be done effectively with limited resources. During the evaluation process, the method allows for…

  6. Mobile based optical form evaluation system

    Directory of Open Access Journals (Sweden)

    Asım Sinan YÜKSEL

    2016-05-01

    Full Text Available Optical forms that contain multiple-choice answers are widely used both for electing students and evaluating student achievements in education systems in our country and worldwide. Optical forms are evaluated by employing optical mark recognition techniques through optical readers. High cost of these machines, limited access to them, long waiting time for evaluation results make the process hard for educationists working in cities or countries. In this study, a mobile application was developed for the educationists who own mobile phones or tablets for the purpose of evaluating students' answer sheets quickly and independent of location and optical readers. Optical form recognition, reading and evaluation processes are done on the image of student's answer sheet that is taken with the mobile phone or tablet of educationist. The Android based mobile application that we developed has a user-friendly interface, high success rate and is the first of our knowledge application that operates on mobile platforms in this field.

  7. Maintenance evaluation using risk based criteria

    International Nuclear Information System (INIS)

    Torres Valle, A.

    1996-01-01

    The maintenance evaluation is currently performed by using economic and, in some case, technical equipment failure criteria, however this is done to a specific equipment level. In general, when statistics are used the analysis for maintenance optimization are made isolated and whit a post mortem character; The integration provided by mean of Probabilistic Safety assessment (PSA) together with the possibilities of its applications, allow for evaluation of maintenance on the basis of broader scope criteria in regard to those traditionally used. The evaluate maintenance using risk based criteria, is necessary to follow a dynamic and systematic approach, in studying the maintenance strategy, to allow for updating the initial probabilistic models, for including operational changes that often take place during operation of complex facilities. This paper proposes a dynamic evaluation system of maintenance task. The system is illustrated by means of a practical example

  8. A Fuzzy Rule-Based Expert System for Evaluating Intellectual Capital

    Directory of Open Access Journals (Sweden)

    Mohammad Hossein Fazel Zarandi

    2012-01-01

    Full Text Available A fuzzy rule-based expert system is developed for evaluating intellectual capital. A fuzzy linguistic approach assists managers to understand and evaluate the level of each intellectual capital item. The proposed fuzzy rule-based expert system applies fuzzy linguistic variables to express the level of qualitative evaluation and criteria of experts. Feasibility of the proposed model is demonstrated by the result of intellectual capital performance evaluation for a sample company.

  9. Data Base on Peer Evaluation of Research in the Netherlands - PER-Base - 1993-2013

    NARCIS (Netherlands)

    van Drooge, L.; de Jong, S.; Faber, M.; Westerheijden, D.

    2013-01-01

    PER-Base contains information on institutional research evaluation in the Netherlands. It covers results from evaluations with the 'Vereniging van Samenwerkende Nederlandse Universiteiten' - VSNU 1993, VSNU 1994 and VSNU 1998 protocols as well as the 'Standard Evaluation Protocol' - SEP 2003-2009

  10. Research on software behavior trust based on hierarchy evaluation

    Science.gov (United States)

    Long, Ke; Xu, Haishui

    2017-08-01

    In view of the correlation software behavior, we evaluate software behavior credibility from two levels of control flow and data flow. In control flow level, method of the software behavior of trace based on support vector machine (SVM) is proposed. In data flow level, behavioral evidence evaluation based on fuzzy decision analysis method is put forward.

  11. Evaluation of Evidence-based Nursing Pain Management Practice.

    Science.gov (United States)

    Song, Wenjia; Eaton, Linda H; Gordon, Debra B; Hoyle, Christine; Doorenbos, Ardith Z

    2015-08-01

    It is important to ensure that cancer pain management is based on the best evidence. Nursing evidence-based pain management can be examined through an evaluation of pain documentation. The aim of this study was to modify and test an evaluation tool for nursing cancer pain documentation, and describe the frequency and quality of nursing pain documentation in one oncology unit via the electronic medical system. A descriptive cross-sectional design was used for this study at an oncology unit of an academic medical center in the Pacific Northwest. Medical records were examined for 37 adults hospitalized during April and May 2013. Nursing pain documentations (N = 230) were reviewed using an evaluation tool modified from the Cancer Pain Practice Index to consist of 13 evidence-based pain management indicators, including pain assessment, care plan, pharmacologic and nonpharmacologic interventions, monitoring and treatment of analgesic side effects, communication with physicians, and patient education. Individual nursing documentation was assigned a score ranging from 0 (worst possible) to 13 (best possible), to reflect the delivery of evidence-based pain management. The participating nurses documented 90% of the recommended evidence-based pain management indicators. Documentation was suboptimal for pain reassessment, pharmacologic interventions, and bowel regimen. The study results provide implications for enhancing electronic medical record design and highlight a need for future research to understand the reasons for suboptimal nursing documentation of cancer pain management. For the future use of the data evaluation tool, we recommend additional modifications according to study settings. Copyright © 2015 American Society for Pain Management Nursing. Published by Elsevier Inc. All rights reserved.

  12. An evaluation of web-based information.

    Science.gov (United States)

    Murphy, Rebecca; Frost, Susie; Webster, Peter; Schmidt, Ulrike

    2004-03-01

    To evaluate the quality of web-based information on the treatment of eating disorders and to investigate potential indicators of content quality. Two search engines were queried to obtain 15 commonly accessed websites about eating disorders. Two reviewers evaluated the characteristics, quality of content, and accountability of the sites. Intercorrelations between variables were calculated. The overall quality of the sites was poor based on the outcome measures used. All quality of content measures correlated with a measure of accountability (Silberg, W.M., Lundberg, G.D., & Mussachio, R.A., 1993). There is a lack of quality information on the treatment of eating disorders on the web. Although accountability criteria may be useful indicators of content quality, there is a need to investigate whether these can be usefully applied to other mental health areas. Copyright 2004 by Wiley Periodicals, Inc. Int J Eat Disord 35: 145-154, 2004.

  13. How to Reach Evidence-Based Usability Evaluation Methods

    NARCIS (Netherlands)

    Marcilly, Romaric; Peute, Linda

    2017-01-01

    This paper discusses how and why to build evidence-based knowledge on usability evaluation methods. At each step of building evidence, requisites and difficulties to achieve it are highlighted. Specifically, the paper presents how usability evaluation studies should be designed to allow capitalizing

  14. A simulator-based approach to evaluating optical trackers

    NARCIS (Netherlands)

    Smit, F.A.; Liere, van R.

    2009-01-01

    We describe a software framework to evaluate the performance of model-based optical trackers in virtual environments. The framework can be used to evaluate and compare the performance of different trackers under various conditions, to study the effects of varying intrinsic and extrinsic camera

  15. Agent-based modeling as a tool for program design and evaluation.

    Science.gov (United States)

    Lawlor, Jennifer A; McGirr, Sara

    2017-12-01

    Recently, systems thinking and systems science approaches have gained popularity in the field of evaluation; however, there has been relatively little exploration of how evaluators could use quantitative tools to assist in the implementation of systems approaches therein. The purpose of this paper is to explore potential uses of one such quantitative tool, agent-based modeling, in evaluation practice. To this end, we define agent-based modeling and offer potential uses for it in typical evaluation activities, including: engaging stakeholders, selecting an intervention, modeling program theory, setting performance targets, and interpreting evaluation results. We provide demonstrative examples from published agent-based modeling efforts both inside and outside the field of evaluation for each of the evaluative activities discussed. We further describe potential pitfalls of this tool and offer cautions for evaluators who may chose to implement it in their practice. Finally, the article concludes with a discussion of the future of agent-based modeling in evaluation practice and a call for more formal exploration of this tool as well as other approaches to simulation modeling in the field. Copyright © 2017 Elsevier Ltd. All rights reserved.

  16. Computer-Based Tools for Evaluating Graphical User Interfaces

    Science.gov (United States)

    Moore, Loretta A.

    1997-01-01

    The user interface is the component of a software system that connects two very complex system: humans and computers. Each of these two systems impose certain requirements on the final product. The user is the judge of the usability and utility of the system; the computer software and hardware are the tools with which the interface is constructed. Mistakes are sometimes made in designing and developing user interfaces because the designers and developers have limited knowledge about human performance (e.g., problem solving, decision making, planning, and reasoning). Even those trained in user interface design make mistakes because they are unable to address all of the known requirements and constraints on design. Evaluation of the user inter-face is therefore a critical phase of the user interface development process. Evaluation should not be considered the final phase of design; but it should be part of an iterative design cycle with the output of evaluation being feed back into design. The goal of this research was to develop a set of computer-based tools for objectively evaluating graphical user interfaces. The research was organized into three phases. The first phase resulted in the development of an embedded evaluation tool which evaluates the usability of a graphical user interface based on a user's performance. An expert system to assist in the design and evaluation of user interfaces based upon rules and guidelines was developed during the second phase. During the final phase of the research an automatic layout tool to be used in the initial design of graphical inter- faces was developed. The research was coordinated with NASA Marshall Space Flight Center's Mission Operations Laboratory's efforts in developing onboard payload display specifications for the Space Station.

  17. Research on Sustainable Development Level Evaluation of Resource-based Cities Based on Shapely Entropy and Chouqet Integral

    Science.gov (United States)

    Zhao, Hui; Qu, Weilu; Qiu, Weiting

    2018-03-01

    In order to evaluate sustainable development level of resource-based cities, an evaluation method with Shapely entropy and Choquet integral is proposed. First of all, a systematic index system is constructed, the importance of each attribute is calculated based on the maximum Shapely entropy principle, and then the Choquet integral is introduced to calculate the comprehensive evaluation value of each city from the bottom up, finally apply this method to 10 typical resource-based cities in China. The empirical results show that the evaluation method is scientific and reasonable, which provides theoretical support for the sustainable development path and reform direction of resource-based cities.

  18. Game-based versus storyboard-based evaluations of crew support prototypes for long duration missions

    Science.gov (United States)

    Smets, N. J. J. M.; Abbing, M. S.; Neerincx, M. A.; Lindenberg, J.; van Oostendorp, H.

    2010-03-01

    The Mission Execution Crew Assistant (MECA) is developing a distributed system of electronic partners (ePartners) to support astronauts performing nominal and off- nominal actions in long duration missions. The ePartners' support should adequately deal with the dynamics of the context, operations, team and personal conditions, which will change over time substantially. Such support—with the concerning context effects—should be thoroughly tested in all stages of the development process. A major question is how to address the context effects of in-space operations for evaluations of crew support prototypes. Via game-technology, the prototype can be tested with astronauts or their representatives, immersed in the envisioned, simulated context. We investigated if a game-based evaluation better addresses the context effects by producing a more elaborate, in-depth and realistic user experience than a "classical" storyboard-based evaluation. In the game-based evaluation, the participants showed higher arousal levels where expected, a more intense feeling of spatial presence, better situation awareness, and faster performance where needed. Such an evaluation can be used as an alternative or complement of field or micro-world tests when context dynamics cannot be simulated in these last tests cost-efficiently.

  19. Building Assessment Survey and Evaluation Data (BASE)

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Building Assessment Survey and Evaluation (BASE) study was a five year study to characterize determinants of indoor air quality and occupant perceptions in...

  20. Financial Derivatives (Based on Two Supports Evaluation

    Directory of Open Access Journals (Sweden)

    Tiberiu Socaciu

    2016-07-01

    Full Text Available In this paper we build a PDE like Black-Scholes equation in hypothesis of a financial derivative that is dependent on two supports (usual is dependent only on one support, like amoption based on gold, when national currency has a great float.Keywords: Financial derivatives, derivatives evaluation, derivatives based on two supports, extended Itō like lemma.

  1. UNIX-based operating systems robustness evaluation

    Science.gov (United States)

    Chang, Yu-Ming

    1996-01-01

    Robust operating systems are required for reliable computing. Techniques for robustness evaluation of operating systems not only enhance the understanding of the reliability of computer systems, but also provide valuable feed- back to system designers. This thesis presents results from robustness evaluation experiments on five UNIX-based operating systems, which include Digital Equipment's OSF/l, Hewlett Packard's HP-UX, Sun Microsystems' Solaris and SunOS, and Silicon Graphics' IRIX. Three sets of experiments were performed. The methodology for evaluation tested (1) the exception handling mechanism, (2) system resource management, and (3) system capacity under high workload stress. An exception generator was used to evaluate the exception handling mechanism of the operating systems. Results included exit status of the exception generator and the system state. Resource management techniques used by individual operating systems were tested using programs designed to usurp system resources such as physical memory and process slots. Finally, the workload stress testing evaluated the effect of the workload on system performance by running a synthetic workload and recording the response time of local and remote user requests. Moderate to severe performance degradations were observed on the systems under stress.

  2. Ontology Based Quality Evaluation for Spatial Data

    Science.gov (United States)

    Yılmaz, C.; Cömert, Ç.

    2015-08-01

    Many institutions will be providing data to the National Spatial Data Infrastructure (NSDI). Current technical background of the NSDI is based on syntactic web services. It is expected that this will be replaced by semantic web services. The quality of the data provided is important in terms of the decision-making process and the accuracy of transactions. Therefore, the data quality needs to be tested. This topic has been neglected in Turkey. Data quality control for NSDI may be done by private or public "data accreditation" institutions. A methodology is required for data quality evaluation. There are studies for data quality including ISO standards, academic studies and software to evaluate spatial data quality. ISO 19157 standard defines the data quality elements. Proprietary software such as, 1Spatial's 1Validate and ESRI's Data Reviewer offers quality evaluation based on their own classification of rules. Commonly, rule based approaches are used for geospatial data quality check. In this study, we look for the technical components to devise and implement a rule based approach with ontologies using free and open source software in semantic web context. Semantic web uses ontologies to deliver well-defined web resources and make them accessible to end-users and processes. We have created an ontology conforming to the geospatial data and defined some sample rules to show how to test data with respect to data quality elements including; attribute, topo-semantic and geometrical consistency using free and open source software. To test data against rules, sample GeoSPARQL queries are created, associated with specifications.

  3. Process Evaluation in Corrections-Based Substance Abuse Treatment.

    Science.gov (United States)

    Wolk, James L.; Hartmann, David J.

    1996-01-01

    Argues that process evaluation is needed to validate prison-based substance abuse treatment effectiveness. Five groups--inmates, treatment staff, prison staff, prison administration, and the parole board--should be a part of this process evaluation. Discusses these five groups relative to three stages of development of substance abuse treatment in…

  4. A wireless sensor network-based portable vehicle detector evaluation system.

    Science.gov (United States)

    Yoo, Seong-eun

    2013-01-17

    In an upcoming smart transportation environment, performance evaluations of existing Vehicle Detection Systems are crucial to maintain their accuracy. The existing evaluation method for Vehicle Detection Systems is based on a wired Vehicle Detection System reference and a video recorder, which must be operated and analyzed by capable traffic experts. However, this conventional evaluation system has many disadvantages. It is inconvenient to deploy, the evaluation takes a long time, and it lacks scalability and objectivity. To improve the evaluation procedure, this paper proposes a Portable Vehicle Detector Evaluation System based on wireless sensor networks. We describe both the architecture and design of a Vehicle Detector Evaluation System and the implementation results, focusing on the wireless sensor networks and methods for traffic information measurement. With the help of wireless sensor networks and automated analysis, our Vehicle Detector Evaluation System can evaluate a Vehicle Detection System conveniently and objectively. The extensive evaluations of our Vehicle Detector Evaluation System show that it can measure the traffic information such as volume counts and speed with over 98% accuracy.

  5. Analytical evaluation of computer-based decision aids

    International Nuclear Information System (INIS)

    Kisner, R.A.

    1985-01-01

    This paper introduces a method for evaluating decision aids for nuclear power plant operators. The method involves a two-stage process of classification and analytical evaluation of display form and content. The classification scheme relates each specific aid to one or more general decision-making tasks. Evaluation then proceeds using a normative top-down design process based on the classification scheme by determining or deducing how various design issues associated with this process were resolved by the designer. The result is an assessment of the ''understandability'' of the aid as well as identification of the training and display features necessary to ensure understandability. 7 refs., 4 figs., 1 tab

  6. Evaluating energy saving system of data centers based on AHP and fuzzy comprehensive evaluation model

    Science.gov (United States)

    Jiang, Yingni

    2018-03-01

    Due to the high energy consumption of communication, energy saving of data centers must be enforced. But the lack of evaluation mechanisms has restrained the process on energy saving construction of data centers. In this paper, energy saving evaluation index system of data centers was constructed on the basis of clarifying the influence factors. Based on the evaluation index system, analytical hierarchy process was used to determine the weights of the evaluation indexes. Subsequently, a three-grade fuzzy comprehensive evaluation model was constructed to evaluate the energy saving system of data centers.

  7. Formulation and Evaluation of Microspheres Based on Gelatin ...

    African Journals Online (AJOL)

    Formulation and Evaluation of Microspheres Based on Gelatin-Mucin Admixtures for the Rectal Delivery of Cefuroxime Sodium. K C Ofokansi, M U Adikwu. Abstract. Purpose: Swellable microspheres based on polymers or their admixtures are frequently employed as drug delivery systems to achieve a controlled release ...

  8. [Reconstituting evaluation methods based on both qualitative and quantitative paradigms].

    Science.gov (United States)

    Miyata, Hiroaki; Okubo, Suguru; Yoshie, Satoru; Kai, Ichiro

    2011-01-01

    Debate about the relationship between quantitative and qualitative paradigms is often muddled and confusing and the clutter of terms and arguments has resulted in the concepts becoming obscure and unrecognizable. In this study we conducted content analysis regarding evaluation methods of qualitative healthcare research. We extracted descriptions on four types of evaluation paradigm (validity/credibility, reliability/credibility, objectivity/confirmability, and generalizability/transferability), and classified them into subcategories. In quantitative research, there has been many evaluation methods based on qualitative paradigms, and vice versa. Thus, it might not be useful to consider evaluation methods of qualitative paradigm are isolated from those of quantitative methods. Choosing practical evaluation methods based on the situation and prior conditions of each study is an important approach for researchers.

  9. 77 FR 42317 - Establish a Patient-Based Registry To Evaluate the Association of Gadolinium Based Contrast...

    Science.gov (United States)

    2012-07-18

    ... Quality Assurance (QA) registry of patients with renal failure who received GBCAs as the basis for a... of the development of a patient-based registry to evaluate the association of gadolinium based..., and a copy to Ira Krefting, Center for Drug Evaluation and Research, Division of Medical Imaging...

  10. Port performance evaluation tool based on microsimulation model

    Directory of Open Access Journals (Sweden)

    Tsavalista Burhani Jzolanda

    2017-01-01

    Full Text Available As port performance is becoming correlative to national competitiveness, the issue of port performance evaluation has significantly raised. Port performances can simply be indicated by port service levels to the ship (e.g., throughput, waiting for berthing etc., as well as the utilization level of equipment and facilities within a certain period. The performances evaluation then can be used as a tool to develop related policies for improving the port’s performance to be more effective and efficient. However, the evaluation is frequently conducted based on deterministic approach, which hardly captures the nature variations of port parameters. Therefore, this paper presents a stochastic microsimulation model for investigating the impacts of port parameter variations to the port performances. The variations are derived from actual data in order to provide more realistic results. The model is further developed using MATLAB and Simulink based on the queuing theory.

  11. Evaluation of a cloud-based local-read paradigm for imaging evaluations in oncology clinical trials for lung cancer

    International Nuclear Information System (INIS)

    Sueoka-Aragane, Naoko; Kobayashi, Naomi; Bonnard, Eric; Charbonnier, Colette; Yamamichi, Junta; Mizobe, Hideaki; Kimura, Shinya

    2015-01-01

    Although tumor response evaluated with radiological imaging is frequently used as a primary endpoint in clinical trials, it is difficult to obtain precise results because of inter- and intra-observer differences. To evaluate usefulness of a cloud-based local-read paradigm implementing software solutions that standardize imaging evaluations among international investigator sites for clinical trials of lung cancer. Two studies were performed: KUMO I and KUMO I Extension. KUMO I was a pilot study aiming at demonstrating the feasibility of cloud implementation and identifying issues regarding variability of evaluations among sites. Chest CT scans at three time-points from baseline to progression, from 10 patients with lung cancer who were treated with EGFR tyrosine kinase inhibitors, were evaluated independently by two oncologists (Japan) and one radiologist (France), through a cloud-based software solution. The KUMO I Extension was performed based on the results of KUMO I. KUMO I showed discordance rates of 40% for target lesion selection, 70% for overall response at the first time-point, and 60% for overall response at the second time-point. Since the main reason for the discordance was differences in the selection of target lesions, KUMO I Extension added a cloud-based quality control service to achieve a consensus on the selection of target lesions, resulting in an improved rate of agreement of response evaluations. The study shows the feasibility of imaging evaluations at investigator sites, based on cloud services for clinical studies involving multiple international sites. This system offers a step forward in standardizing evaluations of images among widely dispersed sites

  12. Image feature extraction based on the camouflage effectiveness evaluation

    Science.gov (United States)

    Yuan, Xin; Lv, Xuliang; Li, Ling; Wang, Xinzhu; Zhang, Zhi

    2018-04-01

    The key step of camouflage effectiveness evaluation is how to combine the human visual physiological features, psychological features to select effectively evaluation indexes. Based on the predecessors' camo comprehensive evaluation method, this paper chooses the suitable indexes combining with the image quality awareness, and optimizes those indexes combining with human subjective perception. Thus, it perfects the theory of index extraction.

  13. An Evaluation of PET Based on Longitudinal Data.

    Science.gov (United States)

    Mandeville, Garrett K.

    Although teacher inservice programs based on Madeline Hunter's Program for Effective Teaching (PET) have become very popular in U.S. schools, there is little evidence that the Hunter model ultimately results in increased student achievement. This longitudinal study attempts to evaluate the effects of Hunter-based staff development programs on…

  14. Usability Evaluation Methods for Gesture-Based Games: A Systematic Review.

    Science.gov (United States)

    Simor, Fernando Winckler; Brum, Manoela Rogofski; Schmidt, Jaison Dairon Ebertz; Rieder, Rafael; De Marchi, Ana Carolina Bertoletti

    2016-10-04

    Gestural interaction systems are increasingly being used, mainly in games, expanding the idea of entertainment and providing experiences with the purpose of promoting better physical and/or mental health. Therefore, it is necessary to establish mechanisms for evaluating the usability of these interfaces, which make gestures the basis of interaction, to achieve a balance between functionality and ease of use. This study aims to present the results of a systematic review focused on usability evaluation methods for gesture-based games, considering devices with motion-sensing capability. We considered the usability methods used, the common interface issues, and the strategies adopted to build good gesture-based games. The research was centered on four electronic databases: IEEE, Association for Computing Machinery (ACM), Springer, and Science Direct from September 4 to 21, 2015. Within 1427 studies evaluated, 10 matched the eligibility criteria. As a requirement, we considered studies about gesture-based games, Kinect and/or Wii as devices, and the use of a usability method to evaluate the user interface. In the 10 studies found, there was no standardization in the methods because they considered diverse analysis variables. Heterogeneously, authors used different instruments to evaluate gesture-based interfaces and no default approach was proposed. Questionnaires were the most used instruments (70%, 7/10), followed by interviews (30%, 3/10), and observation and video recording (20%, 2/10). Moreover, 60% (6/10) of the studies used gesture-based serious games to evaluate the performance of elderly participants in rehabilitation tasks. This highlights the need for creating an evaluation protocol for older adults to provide a user-friendly interface according to the user's age and limitations. Through this study, we conclude this field is in need of a usability evaluation method for serious games, especially games for older adults, and that the definition of a methodology

  15. Criteria to evaluate SAT-based training programs

    International Nuclear Information System (INIS)

    Arjona, O.; Venegas, M.; Rodriguez, L.; Lopez, M.

    1997-01-01

    This paper present some coefficients of error obtained to evaluate the quality of the design development and implementation of SAT-based personnel training programs. With the attainment of these coefficients, with the use of the GESAT system, is facilitated the continuos evaluation of training programs and the main deficiencies in the design, development and implementation of training programs are obtained, through the comparison between the program features and their standards or wanted features and doing an statistics analysis of the data kept in the GESAT system

  16. Evaluating evaluation as a communication process. What role for formative evaluation in ICT-based knowledge acquisition?

    Directory of Open Access Journals (Sweden)

    USEILLE Philippe

    2005-10-01

    Full Text Available This article examines how formative evaluation as a communication process contributes to knowledge acquisition in using ICT (Information and Communication Technologies. Previous studies, especially in the field of education and training, have shown that formative evaluation plays a crucial part in the learning process because it contributes to learning to learn. Through formative evaluation, the learner becomes aware of errors and can adjust learning strategies to the situation. In addition, formative evaluation provides the teaching side with significant and useful information. Consequently, ICT researches have developed a wide range of solutions for this specific purpose. It is however difficult to check the efficiency of these tools by considering the effects of ICT in the knowledge acquisition process. I suggest that formative evaluation includes also a communication system that has an effect on the learning process. This study tackles the issue by proposing an alternative approach to formative evaluation that considers it as both a learning and a communication process. The study is based on SADT (Structure Analysis and Design Technique that provides a suitable description for the whole complex communication process. It allows a rigorous understanding and identification of the variables of evaluation as a communication process in order to take care of an ICT frame. Finally, this article outlines a multidisciplinary method to evaluate formative evaluation by focusing on the validity facets of the communication process. Keywords: formative evaluation, communication process, validity criteria, ICT training context.

  17. Evaluating the role of web-based tutorials in educational practice

    DEFF Research Database (Denmark)

    Moring, Camilla; Schreiber, Trine

    The paper describes and discusses a two step analysis for evaluating web based information literacy tutorials in educational practice. In a recent evaluation project the authors used the analysis to examine three web based tutorials developed by three different academic libraries in Norway. Firstly...... of the analysis focuses on user reception and meaning negotiation. In combination the two different analyses strengthen the evaluation of how web-tutorials as communicative acts become meaningful to users, and how this meaning is negotiated in relation to an educational practice. This approach can be recommended...

  18. An academic program for experience-based seismic evaluation

    International Nuclear Information System (INIS)

    Nix, S.J.; Meyer, W.; Clemence, S.P.

    1990-01-01

    The authors have been involved in a project, sponsored by the Niagara Mohawk Power Corporation, to develop knowledge-based expert systems to aid in the implementation of the Seismic Qualification Utility Group (SQUG) approach for the seismic qualification of equipment in operating nuclear power plants. This approach, being founded on the use of engineering judgment in the application of prior earthquake experience data, requires comprehensive training. There seems to be general consensus that the experience-based approach is a more cost-effective means of qualifying nuclear power plant equipment when compared to the more traditional analytical methods. The experience-based approach has a number of potential applications in civil engineering, including bridge evaluation and design, seismic adequacy of general structures, foundation design, and water and wastewater treatment plant design and operation. The objective of this paper is to outline an academic curriculum, at the master's level, to educate structural engineers to use and further develop the experience-based approach for seismic evaluation. In the long term, this could lead to the development of academic programs in experience-based assessment and design for a wide range of applications in maintaining the nation's infrastructure

  19. Competency-Based Teaching in Radiology - Implementation and Evaluation of Interactive Workstation-Based Learning to Apply NKLM-Based Content.

    Science.gov (United States)

    Koestner, Wolfgang; Otten, Wiebke; Kaireit, Till; Wacker, Frank K; Dettmer, Sabine

    2017-11-01

    Purpose  New teaching formats are required to implement competency-based teaching in radiology teaching. Therefore, we have established and evaluated two practical competency-based radiological courses. Materials and Methods  The courses were held in a multimedia room with 25 computers and a professional DICOM viewer. Students were taught basic image analysis and presented clinical cases with a DICOM viewer under supervision of an instructor using desktop monitoring software. Two courses (elective course and obligatory course) were evaluated by the students (n = 160 and n = 100) and instructors (n = 9) using an anonymized online survey. Results  Courses were evaluated positively by the students and instructors. From the perspective of the students, the courses increased understanding of cross-sectional anatomy (elective/obligatory course: 97 %/95 %) and radiologic findings (97 %/99 %). Furthermore, the course increased the students' interest in radiology (61 %/65 %). The students considered this way of teaching to be relevant to their future occupation (92 % of students in the obligatory course). The higher incidence of teacher-student interaction and the possibility of independent image analysis were rated positively. The majority of instructors did not observe increased distractibility due to the computers (67 %) or notice worse preparation for MC tests (56 %). However, 56 % of instructors reported greater preparation effort. Conclusion  Practical competency-based radiological teaching using a DICOM viewer is a feasible innovative approach with high acceptance among students and instructors. It fosters competency-based learning as proposed by the model curriculum of the German Radiological Society (DRG) and the National Competency-based Catalogue of Learning Objectives for Undergraduate Medical Education (NKLM). Key Points   · Practical competency-based radiological teaching is highly accepted by students and instructors

  20. Probabilistic evaluation of design S-N curve and reliability assessment of ASME code-based evaluation

    International Nuclear Information System (INIS)

    Zhao Yongxiang

    1999-01-01

    A probabilistic evaluating approach of design S-N curve and a reliability assessment approach of the ASME code-based evaluation are presented on the basis of Langer S-N model-based P-S-N curves. The P-S-N curves are estimated by a so-called general maximum likelihood method. This method can be applied to deal with the virtual stress amplitude-crack initial life data which have a characteristics of double random variables. Investigation of a set of the virtual stress amplitude-crack initial life (S-N) data of 1Cr18Ni9Ti austenitic stainless steel-welded joint reveals that the P-S-N curves can give a good prediction of scatter regularity of the S-N data. Probabilistic evaluation of the design S-N curve with 0.9999 survival probability has considered various uncertainties, besides of the scatter of the S-N data, to an appropriate extent. The ASME code-based evaluation with 20 reduction factor on the mean life is much more conservative than that with 2 reduction factor on the stress amplitude. Evaluation of the latter in 666.61 MPa virtual stress amplitude is equivalent to 0.999522 survival probability and in 2092.18 MPa virtual stress amplitude equivalent to 0.9999999995 survival probability. This means that the evaluation in the low loading level may be non-conservative and in contrast, too conservative in the high loading level. Cause is that the reduction factors are constants and the factors can not take into account the general observation that scatter of the N data increases with the loading level decreasing. This has indicated that it is necessary to apply the probabilistic approach to the evaluation of design S-N curve

  1. Evaluation-Function-based Model-free Adaptive Fuzzy Control

    Directory of Open Access Journals (Sweden)

    Agus Naba

    2016-12-01

    Full Text Available Designs of adaptive fuzzy controllers (AFC are commonly based on the Lyapunov approach, which requires a known model of the controlled plant. They need to consider a Lyapunov function candidate as an evaluation function to be minimized. In this study these drawbacks were handled by designing a model-free adaptive fuzzy controller (MFAFC using an approximate evaluation function defined in terms of the current state, the next state, and the control action. MFAFC considers the approximate evaluation function as an evaluative control performance measure similar to the state-action value function in reinforcement learning. The simulation results of applying MFAFC to the inverted pendulum benchmark verified the proposed scheme’s efficacy.

  2. benzoic acid Schiff base and evaluation as corrosion

    African Journals Online (AJOL)

    user

    acid Schiff base and evaluation as corrosion inhibitor of steel in 2.0 M H2SO4. *. 1. ECHEM .... adopted for this experiment was in accordance with .... Table 4: Kinetic data for mild steel corrosion in 2M H2SO4 containing SBDAB from weight loss measurement. inhibitor .... and anti-bacterial activity of Schiff base derived.

  3. Shifting the evaluative gaze: Community-based program evaluation in the homeless sector

    Directory of Open Access Journals (Sweden)

    Bruce Wallace

    2015-09-01

    Full Text Available Homelessness is a growing social issue that is a consequence of structural inequities and contributor to the development of health inequities. Community-based research (CBR has been proposed as an effective research strategy for addressing health equities and promoting social justice through participatory processes. The purpose of this article is to examine the application of CBR principles and practices in the homeless sector and the implications for the production of knowledge and social change to address homelessness. Drawing on our experiences as researchers and service providers, we reflect on the significant successes and challenges associated with using CBR in the homelessness sector. In our discussion we emphasise insights, challenges and lessons learned from a community-university partnership that focused on an evaluation of a transitional shelter program in a large urban centre where housing is expensive and often unavailable. Keywords: Homelessness, housing, transitional housing, transitional shelter, program evaluation, community-based research

  4. Evaluation of competence-based teaching in higher education: From theory to practice.

    Science.gov (United States)

    Bergsmann, Evelyn; Schultes, Marie-Therese; Winter, Petra; Schober, Barbara; Spiel, Christiane

    2015-10-01

    Competence-based teaching in higher education institutions and its evaluation have become a prevalent topic especially in the European Union. However, evaluation instruments are often limited, for example to single student competencies or specific elements of the teaching process. The present paper provides a more comprehensive evaluation concept that contributes to sustainable improvement of competence-based teaching in higher education institutions. The evaluation concept considers competence research developments as well as the participatory evaluation approach. The evaluation concept consists of three stages. The first stage evaluates whether the competencies students are supposed to acquire within the curriculum (ideal situation) are well defined. The second stage evaluates the teaching process and the competencies students have actually acquired (real situation). The third stage evaluates concrete aspects of the teaching process. Additionally, an implementation strategy is introduced to support the transfer from the theoretical evaluation concept to practice. The evaluation concept and its implementation strategy are designed for internal evaluations in higher education and primarily address higher education institutions that have already developed and conducted a competence-based curriculum. Copyright © 2015 Elsevier Ltd. All rights reserved.

  5. OWL2 benchmarking for the evaluation of knowledge based systems.

    Directory of Open Access Journals (Sweden)

    Sher Afgun Khan

    Full Text Available OWL2 semantics are becoming increasingly popular for the real domain applications like Gene engineering and health MIS. The present work identifies the research gap that negligible attention has been paid to the performance evaluation of Knowledge Base Systems (KBS using OWL2 semantics. To fulfil this identified research gap, an OWL2 benchmark for the evaluation of KBS is proposed. The proposed benchmark addresses the foundational blocks of an ontology benchmark i.e. data schema, workload and performance metrics. The proposed benchmark is tested on memory based, file based, relational database and graph based KBS for performance and scalability measures. The results show that the proposed benchmark is able to evaluate the behaviour of different state of the art KBS on OWL2 semantics. On the basis of the results, the end users (i.e. domain expert would be able to select a suitable KBS appropriate for his domain.

  6. Designing and Evaluating Conative Game-Based Learning Scenarios

    DEFF Research Database (Denmark)

    Schønau-Fog, Henrik

    2014-01-01

    It is an essential prerequisite to design for motivation in game-based learning applications, tools and activities. However, how is it possible to design and evaluate motivational game-based learning scenarios in a systematic process-oriented manner based on conation and player engagement? While...... of ‘continuation desire’ such as interfacing with the scenario, exploration and socialising. This paper aims to combine the concepts of Player Engagement, Conation and Continuation Desire by focusing on the conative aspects which are the essential drivers for the desire to continue any learning activity......-based learning scenarios....

  7. Evaluation of complex community-based childhood obesity prevention interventions.

    Science.gov (United States)

    Karacabeyli, D; Allender, S; Pinkney, S; Amed, S

    2018-05-16

    Multi-setting, multi-component community-based interventions have shown promise in preventing childhood obesity; however, evaluation of these complex interventions remains a challenge. The objective of the study is to systematically review published methodological approaches to outcome evaluation for multi-setting community-based childhood obesity prevention interventions and synthesize a set of pragmatic recommendations. MEDLINE, CINAHL and PsycINFO were searched from inception to 6 July 2017. Papers were included if the intervention targeted children ≤18 years, engaged at least two community sectors and described their outcome evaluation methodology. A single reviewer conducted title and abstract scans, full article review and data abstraction. Directed content analysis was performed by three reviewers to identify prevailing themes. Thirty-three studies were included, and of these, 26 employed a quasi-experimental design; the remaining were randomized control trials. Body mass index was the most commonly measured outcome, followed by health behaviour change and psychosocial outcomes. Six themes emerged, highlighting advantages and disadvantages of active vs. passive consent, quasi-experimental vs. randomized control trials, longitudinal vs. repeat cross-sectional designs and the roles of process evaluation and methodological flexibility in evaluating complex interventions. Selection of study designs and outcome measures compatible with community infrastructure, accompanied by process evaluation, may facilitate successful outcome evaluation. © 2018 World Obesity Federation.

  8. Chemical and organoleptic evaluation of Moi-moi based on ...

    African Journals Online (AJOL)

    Chemical and organoleptic evaluation of Moi-moi based on fermented wateryam, Cocoyam, plantain, African yam bean, cowpea, pigeon pea and corn flours. ... The nutrient content of the moi-moi and its organoleptic properties were evaluated using standard procedures. ... http://dx.doi.org/10.4314/jbi.v5i1.30421.

  9. Compatibility of pedigree-based and marker-based relationship matrices for single-step genetic evaluation

    DEFF Research Database (Denmark)

    Christensen, Ole Fredslund

    2012-01-01

    Single-step methods for genomic prediction have recently become popular because they are conceptually simple and in practice such a method can completely replace a pedigree-based method for routine genetic evaluation. An issue with single-step methods is compatibility between the marker-based rel...

  10. Developments of integrity evaluation technology for pressurized components in nuclear power plant and IT based integrity evaluation system

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Young Jin; Choi, Jae Boong; Shim, Do Jun [Sungkyunkwan Univ., Seoul (Korea, Republic of)] (and others)

    2003-03-15

    The objective of this research is to develop an efficient evaluation technology and to investigate applicability of newly-developed technology, such as internet-based cyber platform, to operating power plants. Development of efficient evaluation systems for Nuclear Power Plant components, based on structural integrity assessment techniques, are increasingly demanded for safe operation with the increasing operating period of Nuclear Power Plants. The following five topics are covered in this project: development of assessment method for wall-thinned nuclear piping based on pipe test; development of structural integrity program for steam generator tubes with cracks of various shape; development of fatigue life evaluation system for mam components of NPP; development of internet-based cyber platform and integrity program for primary components of NPP; effect of aging on strength of dissimilar welds.

  11. Efficient p-value evaluation for resampling-based tests

    KAUST Repository

    Yu, K.

    2011-01-05

    The resampling-based test, which often relies on permutation or bootstrap procedures, has been widely used for statistical hypothesis testing when the asymptotic distribution of the test statistic is unavailable or unreliable. It requires repeated calculations of the test statistic on a large number of simulated data sets for its significance level assessment, and thus it could become very computationally intensive. Here, we propose an efficient p-value evaluation procedure by adapting the stochastic approximation Markov chain Monte Carlo algorithm. The new procedure can be used easily for estimating the p-value for any resampling-based test. We show through numeric simulations that the proposed procedure can be 100-500 000 times as efficient (in term of computing time) as the standard resampling-based procedure when evaluating a test statistic with a small p-value (e.g. less than 10( - 6)). With its computational burden reduced by this proposed procedure, the versatile resampling-based test would become computationally feasible for a much wider range of applications. We demonstrate the application of the new method by applying it to a large-scale genetic association study of prostate cancer.

  12. Biological-based and physical-based optimization for biological evaluation of prostate patient's plans

    Science.gov (United States)

    Sukhikh, E.; Sheino, I.; Vertinsky, A.

    2017-09-01

    Modern modalities of radiation treatment therapy allow irradiation of the tumor to high dose values and irradiation of organs at risk (OARs) to low dose values at the same time. In this paper we study optimal radiation treatment plans made in Monaco system. The first aim of this study was to evaluate dosimetric features of Monaco treatment planning system using biological versus dose-based cost functions for the OARs and irradiation targets (namely tumors) when the full potential of built-in biological cost functions is utilized. The second aim was to develop criteria for the evaluation of radiation dosimetry plans for patients based on the macroscopic radiobiological criteria - TCP/NTCP. In the framework of the study four dosimetric plans were created utilizing the full extent of biological and physical cost functions using dose calculation-based treatment planning for IMRT Step-and-Shoot delivery of stereotactic body radiation therapy (SBRT) in prostate case (5 fractions per 7 Gy).

  13. Research on Performance Evaluation by IDSS Based on AHP

    Directory of Open Access Journals (Sweden)

    Tang Xuelian

    2013-03-01

    Full Text Available Talent resource is the primary resource. There are two sides as the starting point and foothold in this paper. One is how to evaluate the performance of science and technology talents flow by IDSS (Intelligence Decision Supporting System. Another is how to guide the innovation work of science and technology according to the evaluation results. The evaluation index on performance system has hierarchical structure. So AHP (Analytic Hierarchy Process is applied to evaluate the performance. Evaluation model is established and illustrated by the cases in this paper. It can be seen that the flow of performance is influenced by the growth rate of important scientific and technological achievements. Furthermore, some constructive suggestions are given based on the results of evaluation.

  14. Development of integrity evaluation technology for pressurized components in nuclear power plant and IT based integrity evaluation system

    International Nuclear Information System (INIS)

    Kim, Young Jin; Choi, Jae Boong; Shim, Do Jun

    2004-02-01

    The objective of this research is to develop on efficient integrity evaluation technology and to investigate the applicability of the newly-developed technology such as internet-based cyber platform etc. to Nuclear Power Plant(NPP) components. The development of an efficient structural integrity evaluation system is necessary for safe operation of NPP as the increase of operating periods. Moreover, material test data as well as emerging structural integrity assessment technology are also needed for the evaluation of aged components. The following five topics are covered in this project: development of the wall-thinning evaluation program for nuclear piping; development of structural integrity evaluation criteria for steam generator tubes with cracks of various shape; development of fatigue life evaluation system for major components of NPP; ingegration of internet-based cyber platform and integrity evaluation program for primary components of NPP; effects of aging on strength of dissimilar welds

  15. Development of integrity evaluation technology for pressurized components in nuclear power plant and IT based integrity evaluation system

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Young Jin; Choi, Jae Boong; Shim, Do Jun [Sungkyunkwan Univ., Seoul (Korea, Republic of)] (and others)

    2004-02-15

    The objective of this research is to develop on efficient integrity evaluation technology and to investigate the applicability of the newly-developed technology such as internet-based cyber platform etc. to Nuclear Power Plant(NPP) components. The development of an efficient structural integrity evaluation system is necessary for safe operation of NPP as the increase of operating periods. Moreover, material test data as well as emerging structural integrity assessment technology are also needed for the evaluation of aged components. The following five topics are covered in this project: development of the wall-thinning evaluation program for nuclear piping; development of structural integrity evaluation criteria for steam generator tubes with cracks of various shape; development of fatigue life evaluation system for major components of NPP; ingegration of internet-based cyber platform and integrity evaluation program for primary components of NPP; effects of aging on strength of dissimilar welds.

  16. Comparative assessment of PIV-based pressure evaluation techniques applied to a transonic base flow

    NARCIS (Netherlands)

    Blinde, P; Michaelis, D; van Oudheusden, B.W.; Weiss, P.E.; de Kat, R.; Laskari, A.; Jeon, Y.J.; David, L; Schanz, D; Huhn, F.; Gesemann, S; Novara, M.; McPhaden, C.; Neeteson, N.; Rival, D.; Schneiders, J.F.G.; Schrijer, F.F.J.

    2016-01-01

    A test case for PIV-based pressure evaluation techniques has been developed by constructing a simulated experiment from a ZDES simulation for an axisymmetric base flow at Mach 0.7. The test case comprises sequences of four subsequent particle images (representing multi-pulse data) as well as

  17. Biological evaluation of silver nanoparticles incorporated into chitosan-based membranes

    NARCIS (Netherlands)

    Shao, J.; Yu, N.; Kolwijck, E.; Wang, B.; Tan, K.W.; Jansen, J.A.; Walboomers, X.F.; Yang, F.

    2017-01-01

    AIM: To evaluate the antibacterial potential and biological performance of silver nanoparticles in chitosan-based membranes. MATERIALS & METHODS: Electrospun chitosan/poly(ethylene oxide) membranes with different amounts of silver nanoparticles were evaluated for antibacterial properties and

  18. How to Evaluate Smart Cities’ Construction? A Comparison of Chinese Smart City Evaluation Methods Based on PSF

    Directory of Open Access Journals (Sweden)

    Hongbo Shi

    2017-12-01

    Full Text Available With the rapid development of smart cities in the world, research relating to smart city evaluation has become a new research hotspot in academia. However, there are general problems of cognitive deprivation, lack of planning experience, and low level of coordination in smart cities construction. It is necessary for us to develop a set of scientific, reasonable, and effective evaluation index systems and evaluation models to analyze the development degree of urban wisdom. Based on the theory of the urban system, we established a comprehensive evaluation index system for urban intelligent development based on the people-oriented, city-system, and resources-flow (PSF evaluation model. According to the characteristics of the comprehensive evaluation index system of urban intelligent development, the analytic hierarchy process (AHP combined with the experts’ opinions determine the index weight of this system. We adopted the neural network model to construct the corresponding comprehensive evaluation model to characterize the non-linear characteristics of the comprehensive evaluation indexes system, thus to quantitatively quantify the comprehensive evaluation indexes of urban intelligent development. Finally, we used the AHP, AHP-BP (Back Propagation, and AHP-ELM (Extreme Learning Machine models to evaluate the intelligent development level of 151 cities in China, and compared them from the perspective of model accuracy and time cost. The final simulation results show that the AHP-ELM model is the best evaluation model.

  19. [Community-based health promotion--a challenge for the evaluation].

    Science.gov (United States)

    Loss, J; Eichhorn, C; Gehlert, J; Donhauser, J; Wise, M; Nagel, E

    2007-02-01

    Community-based health promotion (CBHP) aims at mobilising citizens for health-related issues in their environment, and at implementing health-promoting projects on the community level. Whereas recent political decisions support this approach, scientific studies dealing with theories and consequences of CBHP are scarce in Germany. Evaluation of CBHP could help identify (in)effective factors and elements of community programmes and thus improve future planning. In Germany, however, there is a deficit in systematic concepts and recommendations for the evaluation of CBHP. This work outlines basic ideas and core principles of CBHP and deduces implications for the assessment of health-promoting community projects. Based on different international models and studies and on discussions with health promotion professionals, we developed a framework for the evaluation of CBHP. The proposed framework includes a guideline for CBHP programme planning. Its strategic and operational criteria can serve as a basis for a strategy evaluation. In terms of process evaluation, indicators for the dimensions (1) programme implementation and service delivery, (2) capacity building, and (3) reach of and acceptability in the target group were developed. In addition, we present different areas of OUTCOME EVALUATION; it is advisable to distinguish between measurement on the individual and on the community level. The framework further proposes strategies for the evaluation of the core principles empowerment and participation. The presented framework can serve as a basis for the development of flexible and individual instruments for the evaluation of CBHP, which should not ignore the perspective of the citizens, or complex aspects like changes on the community level. Some aspects, e.g., the potential evaluation of further targets of CBHP (improvement of quality of life, reduction of social and health inequalities), the responsibility of evaluation or the effects of financial constraints, are

  20. Radiobiologically based treatment plan evaluation for prostate seed implants

    Directory of Open Access Journals (Sweden)

    Sotirios Stathakis

    2011-07-01

    Full Text Available Purpose: Accurate prostate low dose-rate brachytherapy treatment plan evaluation is important for future care decisions. Presently, an evaluation is based on dosimetric quantifiers for the tumor and organs at risk. However, these do not account for effects of varying dose-rate, tumor repopulation and other biological effects. In this work, incorporation of the biological response is used to obtain more clinically relevant treatment plan evaluation.Material and methods: Eleven patients were evaluated. Each patient received a 145 Gy implant. Iodine-125 seeds were used and the treatment plans were created on the Prowess system. Based on CT images the post-implant plan was created. In the post-plan, the tumor, urethra, bladder and rectum were contoured. The biologically effective dose was used to determine the tumor control probability and the normal tissue complication probabilities for the urethra, bladder, rectum and surrounding tissue. Results: The average tumor control probability and complication probabilities for the urethra, bladder, rectum and surrounding tissue were 99%, 29%, 0%, 12% and 6%, respectively. These measures provide a simpler means for evaluation and since they include radiobiological factors, they provide more reliable estimation of the treatment outcome. Conclusions: The goal of this work was to create more clinically relevant prostate seed-implant evaluation by incorporating radiobiological measures. This resulted in a simpler descriptor of treatment plan quality and was consistent with patient outcomes.

  1. Development of Weeds Density Evaluation System Based on RGB Sensor

    Science.gov (United States)

    Solahudin, M.; Slamet, W.; Wahyu, W.

    2018-05-01

    Weeds are plant competitors which potentially reduce the yields due to competition for sunlight, water and soil nutrients. Recently, for chemical-based weed control, site-specific weed management that accommodates spatial and temporal diversity of weeds attack in determining the appropriate dose of herbicide based on Variable Rate Technology (VRT) is preferable than traditional approach with single dose herbicide application. In such application, determination of the level of weed density is an important task. Several methods have been studied to evaluate the density of weed attack. The objective of this study is to develop a system that is able to evaluate weed density based on RGB (Red, Green, and Blue) sensors. RGB sensor was used to acquire the RGB values of the surface of the field. An artificial neural network (ANN) model was then used for determining the weed density. In this study the ANN model was trained with 280 training data (70%), 60 validation data (15%), and 60 testing data (15%). Based on the field test, using the proposed method the weed density could be evaluated with an accuracy of 83.75%.

  2. Process Evaluation for a Prison-based Substance Abuse Program.

    Science.gov (United States)

    Staton, Michele; Leukefeld, Carl; Logan, T. K.; Purvis, Rick

    2000-01-01

    Presents findings from a process evaluation conducted in a prison-based substance abuse program in Kentucky. Discusses key components in the program, including a detailed program description, modifications in planned treatment strategies, program documentation, and perspectives of staff and clients. Findings suggest that prison-based programs have…

  3. Aircraft Cockpit Ergonomic Layout Evaluation Based on Uncertain Linguistic Multiattribute Decision Making

    Directory of Open Access Journals (Sweden)

    Junxuan Chen

    2014-03-01

    Full Text Available In the view of the current cockpit information interaction, facilities and other characteristics are increasingly multifarious; the early layout evaluation methods based on single or partial components, often cause comprehensive evaluation unilateral, leading to the problems of long development period and low efficiency. Considering the fuzziness of ergonomic evaluation and diversity of evaluation information attributes, we refine and build an evaluation system based on the characteristics of the current cockpit man-machine layout and introduce the different types of uncertain linguistic multiple attribute combination decision making (DTULDM method in the cockpit layout evaluation process. Meanwhile, we also establish an aircraft cockpit ergonomic layout evaluation model. Finally, an experiment about cockpit layout evaluation is given, and the result demonstrates that the proposed method about cockpit ergonomic layout evaluation is feasible and effective.

  4. Strengthening air traffic safety management by moving from outcome-based towards risk-based evaluation of runway incursions

    International Nuclear Information System (INIS)

    Stroeve, Sybert H.; Som, Pradip; Doorn, Bas A. van; Bakker, G.J.

    2016-01-01

    Current safety management of aerodrome operations uses judgements of severity categories to evaluate runway incursions. Incident data show a small minority of severe incursions and a large majority of less severe incursions. We show that these severity judgements are mainly based upon the outcomes of runway incursions, in particular on the closest distances attained. As such, the severity-based evaluation leads to coincidental safety management feedback, wherein causes and risk implications of runway incursions are not well considered. In this paper we present a new framework for the evaluation of runway incursions, which effectively uses all runway incursions, which judges same types of causes similarly, and which structures causes and risk implications. The framework is based on risks of scenarios associated with the initiation of runway incursions. As a basis an inventory of scenarios is provided, which can represent almost all runway incursions involving a conflict with an aircraft. A main step in the framework is the assessment of the conditional probability of a collision given a runway incursion scenario. This can be effectively achieved for large sets of scenarios by agent-based dynamic risk modelling. The results provide detailed feedback on risks of runway incursion scenarios, thus enabling effective safety management. - Highlights: • Current evaluation of runway incursions is primarily based on their outcomes. • A new framework assesses collision risk given initiation of runway incursions. • Agent-based dynamic risk modelling can evaluate the risks of many scenarios. • A developed scenario inventory can represent almost all runway incursions. • The framework provides detailed feedback to safety management.

  5. Development of safety evaluation guidelines for base-isolated buildings in Japan

    International Nuclear Information System (INIS)

    Aoyama, Hiroyuki

    1989-01-01

    This paper describes the safety evaluation guidelines and the review process for non-nuclear base-isolated buildings proposed for construction in Japan. The paper discusses the guidelines application for two types of soil: hard soil and intermediate soil (soft soil was excluded.); safety evaluation items included in the level C design review; and safety margin of base isolation. Lessons learned through these design review efforts have potential applicability to design of seismic base isolation for nuclear power plants

  6. Evaluating potentialities and constrains of Problem Based Learning curriculum

    DEFF Research Database (Denmark)

    Guerra, Aida

    2013-01-01

    This paper presents a research design to evaluate Problem Based Learning (PBL) curriculum potentialities and constrains for future changes. PBL literature lacks examples of how to evaluate and analyse established PBL learning environments to address new challenges posed. The research design......) in the curriculum and a mean to choose cases for further case study (third phase)....

  7. Evaluation of the Professional Development Program on Web Based Content Development

    Science.gov (United States)

    Yurdakul, Bünyamin; Uslu, Öner; Çakar, Esra; Yildiz, Derya G.

    2014-01-01

    The aim of this study is to evaluate the professional development program on web based content development (WBCD) designed by the Ministry of National Education (MoNE). Based on the theoretical CIPP model by Stufflebeam and Guskey's levels of evaluation, the study was carried out as a case study. The study group consisted of the courses that…

  8. Evaluation of template-based models in CASP8 with standard measures

    KAUST Repository

    Cozzetto, Domenico

    2009-01-01

    The strategy for evaluating template-based models submitted to CASP has continuously evolved from CASP1 to CASP5, leading to a standard procedure that has been used in all subsequent editions. The established approach includes methods for calculating the quality of each individual model, for assigning scores based on the distribution of the results for each target and for computing the statistical significance of the differences in scores between prediction methods. These data are made available to the assessor of the template-based modeling category, who uses them as a starting point for further evaluations and analyses. This article describes the detailed workflow of the procedure, provides justifications for a number of choices that are customarily made for CASP data evaluation, and reports the results of the analysis of template-based predictions at CASP8.

  9. A knowledge-based approach to the evaluation of fault trees

    International Nuclear Information System (INIS)

    Hwang, Yann-Jong; Chow, Louis R.; Huang, Henry C.

    1996-01-01

    A list of critical components is useful for determining the potential problems of a complex system. However, to find this list through evaluating the fault trees is expensive and time consuming. This paper intends to propose an integrated software program which consists of a fault tree constructor, a knowledge base, and an efficient algorithm for evaluating minimal cut sets of a large fault tree. The proposed algorithm uses the approaches of top-down heuristic searching and the probability-based truncation. That makes the evaluation of fault trees obviously efficient and provides critical components for solving the potential problems in complex systems. Finally, some practical fault trees are included to illustrate the results

  10. Simulation-based decision support for evaluating operational plans

    Directory of Open Access Journals (Sweden)

    Johan Schubert

    2015-12-01

    Full Text Available In this article, we describe simulation-based decision support techniques for evaluation of operational plans within effects-based planning. Using a decision support tool, developers of operational plans are able to evaluate thousands of alternative plans against possible courses of events and decide which of these plans are capable of achieving a desired end state. The objective of this study is to examine the potential of a decision support system that helps operational analysts understand the consequences of numerous alternative plans through simulation and evaluation. Operational plans are described in the effects-based approach to operations concept as a set of actions and effects. For each action, we examine several different alternative ways to perform the action. We use a representation where a plan consists of several actions that should be performed. Each action may be performed in one of several different alternative ways. Together these action alternatives make up all possible plan instances, which are represented as a tree of action alternatives that may be searched for the most effective sequence of alternative actions. As a test case, we use an expeditionary operation with a plan of 43 actions and several alternatives for these actions, as well as a scenario of 40 group actors. Decision support for planners is provided by several methods that analyze the impact of a plan on the 40 actors, e.g., by visualizing time series of plan performance. Detailed decision support for finding the most influential actions of a plan is presented by using sensitivity analysis and regression tree analysis. Finally, a decision maker may use the tool to determine the boundaries of an operation that it must not move beyond without risk of drastic failure. The significant contribution of this study is the presentation of an integrated approach for evaluation of operational plans.

  11. EVALUATING HUMAN CAPITAL IN A KNOWLEDGE – BASED APPROACH

    Directory of Open Access Journals (Sweden)

    Emanoil MUSCALU

    2014-04-01

    Full Text Available The widespread enthusiasm for a knowledge-based approach to understanding the nature of a business and the possible basis for sustained competitive advantage have renewed interest in human capital evaluation or measurement. While many attempts have been made to develop methods for measuring intellectual capital, none have been widely adopted in the business world. In the knowledge-based organizations, and generally, in the information society, human capital is recognized as the fundamental factor of overall progress, and experts agree that long-term investment in human capital has strong drive-propagation effects at the individual, organizational, national and global level. In this paper, we consider that a knowledge-based approach can offer new possibilities and answers to illustrate the importance of evaluation the human capital and knowledge assets by consistently generating added value in the business world.

  12. Laboratory and field based evaluation of chromatography ...

    Science.gov (United States)

    The Monitor for AeRosols and GAses in ambient air (MARGA) is an on-line ion-chromatography-based instrument designed for speciation of the inorganic gas and aerosol ammonium-nitrate-sulfate system. Previous work to characterize the performance of the MARGA has been primarily based on field comparison to other measurement methods to evaluate accuracy. While such studies are useful, the underlying reasons for disagreement among methods are not always clear. This study examines aspects of MARGA accuracy and precision specifically related to automated chromatography analysis. Using laboratory standards, analytical accuracy, precision, and method detection limits derived from the MARGA chromatography software are compared to an alternative software package (Chromeleon, Thermo Scientific Dionex). Field measurements are used to further evaluate instrument performance, including the MARGA’s use of an internal LiBr standard to control accuracy. Using gas/aerosol ratios and aerosol neutralization state as a case study, the impact of chromatography on measurement error is assessed. The new generation of on-line chromatography-based gas and particle measurement systems have many advantages, including simultaneous analysis of multiple pollutants. The Monitor for Aerosols and Gases in Ambient Air (MARGA) is such an instrument that is used in North America, Europe, and Asia for atmospheric process studies as well as routine monitoring. While the instrument has been evaluat

  13. Implementing economic evaluation in simulation-based medical education: challenges and opportunities.

    Science.gov (United States)

    Lin, Yiqun; Cheng, Adam; Hecker, Kent; Grant, Vincent; Currie, Gillian R

    2018-02-01

    Simulation-based medical education (SBME) is now ubiquitous at all levels of medical training. Given the substantial resources needed for SBME, economic evaluation of simulation-based programmes or curricula is required to demonstrate whether improvement in trainee performance (knowledge, skills and attitudes) and health outcomes justifies the cost of investment. Current literature evaluating SBME fails to provide consistent and interpretable information on the relative costs and benefits of alternatives. Economic evaluation is widely applied in health care, but is relatively scarce in medical education. Therefore, in this paper, using a focus on SBME, we define economic evaluation, describe the key components, and discuss the challenges associated with conducting an economic evaluation of medical education interventions. As a way forward to the rigorous and state of the art application of economic evaluation in medical education, we outline the steps to gather the necessary information to conduct an economic evaluation of simulation-based education programmes and curricula, and describe the main approaches to conducting an economic evaluation. A properly conducted economic evaluation can help stakeholders (i.e., programme directors, policy makers and curriculum designers) to determine the optimal use of resources in selecting the modality or method of assessment in simulation. It also helps inform broader decision making about allocation of scarce resources within an educational programme, as well as between education and clinical care. Economic evaluation in medical education research is still in its infancy, and there is significant potential for state-of-the-art application of these methods in this area. © 2017 John Wiley & Sons Ltd and The Association for the Study of Medical Education.

  14. Evaluation of an Internet, Stage-Based Physical Activity Intervention.

    Science.gov (United States)

    Hager, Ronald L.; Hardy, Aaron; Aldana, Steven G.; George, James D.

    2002-01-01

    Evaluated the impact of online, stage-based materials on exercise behavior and stage of readiness to change. College faculty participated in stage-based, action-message, or control groups. Occupational and leisure activity, 7-day physical activity, exercise self-efficacy, and stage of readiness to change were assessed at baseline and 6 weeks.…

  15. A peer evaluation of the community-based education programme for ...

    African Journals Online (AJOL)

    A peer evaluation of the community-based education programme for medical ... The University of Zimbabwe College of Health Sciences (UZCHS), Harare, which ... of community-based activities and the availability of a large teaching platform, ...

  16. Evaluation of Palm Oil-Based Paracetamol Suppositories by ...

    African Journals Online (AJOL)

    Methods: The suppository base was prepared by mixing hydrogenated palm oil and palm kernel ... DSC can be used to predict drug release in paracetamol suppository formulations. Keywords: Palm oil, Liquefaction time, Paracetamol, Suppositories, Thermal analysis. ..... Drug Evaluation & Research (CDER), Food and.

  17. Quality evaluation in health care services based on customer-provider relationships.

    Science.gov (United States)

    Eiriz, Vasco; Figueiredo, José António

    2005-01-01

    To develop a framework for evaluating the quality of Portuguese health care organisations based on the relationship between customers and providers, to define key variables related to the quality of health care services based on a review of the available literature, and to establish a conceptual framework in order to test the framework and variables empirically. Systematic review of the literature. Health care services quality should not be evaluated exclusively by customers. Given the complexity, ambiguity and heterogeneity of health care services, the authors develop a framework for health care evaluation based on the relationship between customers (patients, their relatives and citizens) and providers (managers, doctors, other technical staff and non-technical staff), and considering four quality items (customer service orientation, financial performance, logistical functionality and level of staff competence). This article identifies important changes in the Portuguese health care industry, such as the ownership of health care providers. At the same time, customers are changing their attitudes towards health care, becoming much more concerned and demanding of health services. These changes are forcing Portuguese private and public health care organisations to develop more marketing-oriented services. This article recognises the importance of quality evaluation of health care services as a means of increasing customer satisfaction and organisational efficiency, and develops a framework for health care evaluation based on the relationship between customers and providers.

  18. A framework for performance evaluation of model-based optical trackers

    NARCIS (Netherlands)

    Smit, F.A.; Liere, van R.

    2008-01-01

    We describe a software framework to evaluate the performance of model-based optical trackers in virtual environments. The framework can be used to evaluate and compare the performance of different trackers under various conditions, to study the effects of varying intrinsic and extrinsic camera

  19. EVALUATION OF SIFT AND SURF FOR VISION BASED LOCALIZATION

    Directory of Open Access Journals (Sweden)

    X. Qu

    2016-06-01

    Full Text Available Vision based localization is widely investigated for the autonomous navigation and robotics. One of the basic steps of vision based localization is the extraction of interest points in images that are captured by the embedded camera. In this paper, SIFT and SURF extractors were chosen to evaluate their performance in localization. Four street view image sequences captured by a mobile mapping system, were used for the evaluation and both SIFT and SURF were tested on different image scales. Besides, the impact of the interest point distribution was also studied. We evaluated the performances from for aspects: repeatability, precision, accuracy and runtime. The local bundle adjustment method was applied to refine the pose parameters and the 3D coordinates of tie points. According to the results of our experiments, SIFT was more reliable than SURF. Apart from this, both the accuracy and the efficiency of localization can be improved if the distribution of feature points are well constrained for SIFT.

  20. Reliability assessment of a peer evaluation instrument in a team-based learning course

    Directory of Open Access Journals (Sweden)

    Wahawisan J

    2016-03-01

    Full Text Available Objective: To evaluate the reliability of a peer evaluation instrument in a longitudinal team-based learning setting. Methods: Student pharmacists were instructed to evaluate the contributions of their peers. Evaluations were analyzed for the variance of the scores by identifying low, medium, and high scores. Agreement between performance ratings within each group of students was assessed via intra-class correlation coefficient (ICC. Results: We found little variation in the standard deviation (SD based on the score means among the high, medium, and low scores within each group. The lack of variation in SD of results between groups suggests that the peer evaluation instrument produces precise results. The ICC showed strong concordance among raters. Conclusions: Findings suggest that our student peer evaluation instrument provides a reliable method for peer assessment in team-based learning settings.

  1. Performance evaluation of self-breakdown-based single-gap ...

    Indian Academy of Sciences (India)

    gap plasma cathode electron (PCE) gun (5–20 kV/50–160 A) in argon, gas atmosphere and its performance evaluation based on particle-in-cell (PIC) simulation code `OOPIC-Pro'.The PCE-Gun works in conducting phase (low energy, high ...

  2. Evaluating task-based syllabus for EFL learners

    Directory of Open Access Journals (Sweden)

    Luu, Hoang Mai

    2013-01-01

    Full Text Available This research is an evaluation of the effectiveness of task-based syllabus on EFL learners’ language competence at a private university in Vietnam educational context. This research resorts to questionnaire survey, semi-structured interview, and pretest and posttest as instruments for data collection. The research findings revealed that a strength of the current task-based syllabus is the match between lesson topics and students’ expectations. However, the syllabus still created difficulties for students including insufficient vocabulary, unfamiliar structures, and lack of life knowledge. The effect of teaching with task-based syllabus on students’ language performance is also reflected through a significant difference in mean scores between the pretest and the posttest. This research provides an insight into the effectiveness of English teaching through task-based syllabus at a private university in Vietnam setting. It implies to teachers that they need to be sustainable change catalysts for more interesting syllabus for learners

  3. Preliminary Evaluation of a Practice-Based EBVM Skills Development Program

    Directory of Open Access Journals (Sweden)

    Ava Firth

    2016-12-01

    Full Text Available Whilst there is a small body of research that investigates the development of EBVM skills in veterinary undergraduates there is a paucity of research that aims to understand the development of EBVM skills in practice-based post-graduate veterinary surgeons. This paper is a small step in remedying that shortfall. In particular, the paper provides a progress report on an RCVS Knowledge funded study that is evaluating a practice-based EBVM development program. The program is being conducted with a cohort of 20 veterinary surgeons and veterinary nurses employed in a private practice veterinary company across multiple sites. The facilitated instruction approach incorporates multiple supports including; group based and one-to-one, synchronous and asynchronous, and, face-to-face and online strategies. This paper will provide details of both the facilitation and evaluation approaches that have been adopted. The paper will also report on preliminary results of the evaluation which focuses on barriers and facilitators to EBVM development.This is a podcast of Ava and Ian's talk at the Veterinary Evidence Today conference, Edinburgh November 2, 2016.

  4. Bio-Based Adhesives and Evaluation for Wood Composites Application

    Directory of Open Access Journals (Sweden)

    Fatemeh Ferdosian

    2017-02-01

    Full Text Available There has been a rapid growth in research and innovation of bio-based adhesives in the engineered wood product industry. This article reviews the recent research published over the last few decades on the synthesis of bio-adhesives derived from such renewable resources as lignin, starch, and plant proteins. The chemical structure of these biopolymers is described and discussed to highlight the active functional groups that are used in the synthesis of bio-adhesives. The potentials and drawbacks of each biomass are then discussed in detail; some methods have been suggested to modify their chemical structures and to improve their properties including water resistance and bonding strength for their ultimate application as wood adhesives. Moreover, this article includes discussion of techniques commonly used for evaluating the petroleum-based wood adhesives in terms of mechanical properties and penetration behavior, which are expected to be more widely applied to bio-based wood adhesives to better evaluate their prospect for wood composites application.

  5. Development and Evaluation of Computer-Based Laboratory Practical Learning Tool

    Science.gov (United States)

    Gandole, Y. B.

    2006-01-01

    Effective evaluation of educational software is a key issue for successful introduction of advanced tools in the curriculum. This paper details to developing and evaluating a tool for computer assisted learning of science laboratory courses. The process was based on the generic instructional system design model. Various categories of educational…

  6. Reliability evaluation of microgrid considering incentive-based demand response

    Science.gov (United States)

    Huang, Ting-Cheng; Zhang, Yong-Jun

    2017-07-01

    Incentive-based demand response (IBDR) can guide customers to adjust their behaviour of electricity and curtail load actively. Meanwhile, distributed generation (DG) and energy storage system (ESS) can provide time for the implementation of IBDR. The paper focus on the reliability evaluation of microgrid considering IBDR. Firstly, the mechanism of IBDR and its impact on power supply reliability are analysed. Secondly, the IBDR dispatch model considering customer’s comprehensive assessment and the customer response model are developed. Thirdly, the reliability evaluation method considering IBDR based on Monte Carlo simulation is proposed. Finally, the validity of the above models and method is studied through numerical tests on modified RBTS Bus6 test system. Simulation results demonstrated that IBDR can improve the reliability of microgrid.

  7. Inspection Based Evaluation of a Danish Road Bridge

    DEFF Research Database (Denmark)

    Thoft-Christensen, Palle

    In this paper it is shown how an inspection-based evaluation of a Danish road bridge may be performed using the BRIDGE1 and BRIDGE2 bridge management systems produced within the EC-supported research programme "Assessment of Performance and Optimal Strategies for Inspection and Maintenance...

  8. A Course Evaluation Tool Based on SPICES Model, and its Application to Evaluation of Medical Pharmacology Course

    Directory of Open Access Journals (Sweden)

    Tahereh Changiz

    2009-02-01

    Full Text Available Background and purpose: The SPICES model has been proposed to be used both as a framework for quality improvement in medical education and as a guide for evaluation of curricula. The six strategies of SPICES are representatives of innovative approaches to medical education, and each one has been considered as a continuum. The present study models a theory-based questionnaire, based on SPICES, to be used as a course evaluation tool, through developing a conceptual model for eachcontinuum of the six.Methods: At the first step, operational definition and questionnaire development was performed as an extensive literature review and consensus building in a focus groups of experts .The content andface validity of questionnaire was confirmed. In the second phase-as a pilot -, the questionnaire was used for evaluation of Medical Pharmacology course at Isfahan University of Medical Sciences.Results: The results showed that Medical Pharmacology course located in the traditional end of SPICES continua according to the most aspects of the course.Conclusion: The pilot study showed that the questionnaire scale should be changed. Also it may be more feasible and valid if an item bank is prepared based on the proposed matrix and appropriate items are selected according to the general situation of the curriculum.Keywords: SPICES MODEL, EVALUATION

  9. Risk Evaluation of Railway Coal Transportation Network Based on Multi Level Grey Evaluation Model

    Science.gov (United States)

    Niu, Wei; Wang, Xifu

    2018-01-01

    The railway transport mode is currently the most important way of coal transportation, and now China’s railway coal transportation network has become increasingly perfect, but there is still insufficient capacity, some lines close to saturation and other issues. In this paper, the theory and method of risk assessment, analytic hierarchy process and multi-level gray evaluation model are applied to the risk evaluation of coal railway transportation network in China. Based on the example analysis of Shanxi railway coal transportation network, to improve the internal structure and the competitiveness of the market.

  10. Multivariate Methods Based Soft Measurement for Wine Quality Evaluation

    Directory of Open Access Journals (Sweden)

    Shen Yin

    2014-01-01

    a decision. However, since the physicochemical indexes of wine can to some extent reflect the quality of wine, the multivariate statistical methods based soft measure can help the oenologist in wine evaluation.

  11. Pharmacology Goes Concept-Based: Course Design, Implementation, and Evaluation.

    Science.gov (United States)

    Lanz, Amelia; Davis, Rebecca G

    Although concept-based curricula are frequently discussed in the nursing education literature, little information exists to guide the development of a concept-based pharmacology course. Traditionally, nursing pharmacology courses are taught with an emphasis on drug class where a prototype drug serves as an exemplar. When transitioning pharmacology to a concept-based course, special considerations are in order. How can educators successfully integrate essential pharmacological content into a curriculum structured around nursing concepts? This article presents one approach to the design and implementation of a concept-based undergraduate pharmacology course. Planning methods, supportive teaching strategies, and course evaluation procedures are discussed.

  12. A study of combined evaluation of suppliers based on correlation

    Directory of Open Access Journals (Sweden)

    Heting Qiu

    2013-03-01

    Full Text Available Purpose: The Selection of logistics service providers is an important issue in supply chain management. But different evaluation methods may lead to different results, which could cause inconsistent conclusions. This paper makes use of a new perspective to combine with a variety of methods to eliminate the deviation of different single evaluation methods. Design/methodology/approach: This paper expounds the application of the combined evaluation method based on correlation. Entropy method, factor analysis, grey colligation evaluation and AHP have been used for research. Findings: According to the evaluate result, the ranking of suppliers obtained by each method have obvious differences. The result shows that combined evaluation method can eliminate the deviation of different single evaluation methods. Originality/value: The combined evaluation method makes up for the defects of single evaluation methods and obtains a result that is more stable and creditable with smaller deviation. This study can provide the enterprise leaders with more scientific method to select their cooperative companies. 

  13. Institutional design and utilization of evaluation: a contribution to a theory of evaluation influence based on Swiss experience.

    Science.gov (United States)

    Balthasar, Andreas

    2009-06-01

    Growing interest in the institutionalization of evaluation in the public administration raises the question as to which institutional arrangement offers optimal conditions for the utilization of evaluations. Institutional arrangement denotes the formal organization of processes and competencies, together with procedural rules, that are applicable independently of individual evaluation projects. It reflects the evaluation practice of an institution and defines the distance between evaluators and evaluees. This article outlines the results of a broad-based study of all 300 or so evaluations that the Swiss Federal Administration completed from 1999 to 2002. On this basis, it derives a theory of the influence of institutional factors on the utilization of evaluations.

  14. Evaluation of a case-based urology learning program.

    Science.gov (United States)

    Mishra, Kirtishri; Snow-Lisy, Devon C; Ross, Jonathan; Goldfarb, David A; Goldman, Howard; Campbell, Steven C

    2013-12-01

    To address the challenges that today's trainees encounter, such as information overload and reduced immersion in the field, and recognizing their preference for novel educational resources, an electronic case-based urology learning program was developed. Each case was designed to illustrate the basic principles of the disease process and the fundamentals of evaluation and management using the Socratic method, recapitulating a prototypical patient encounter. A 21-question survey was developed after review of published reports of classroom and clinical learning environment surveys. The target group was 2 pilot urology training programs (the Cleveland Clinic and University Hospitals-Case Medical Center). The responses were entirely anonymous. A total of 32 trainees participated (8 fellows and 24 residents), representing a 53% response rate. Most trainees (79%) were able to process cases within an average of ≤ 10 minutes. Of the trainees, 91% reported referring back to particular cases for patient care, to review for examinations, or for studying. Most trainees believed a case-based urology learning program would be a potentially important resource for clinical practice (69%) and for preparing for the in-service (63%) or board (69%) examinations. Most trainees believed the program met its goals of illustrating the basics principles of the disease process (88%), outlining the fundamentals of evaluation and management (94%), and improving the trainees' knowledge base (91%). An electronic case-based urology learning program is feasible and useful and stimulates learning at all trainee levels. Copyright © 2013 Elsevier Inc. All rights reserved.

  15. Rough Set Theory Based Fuzzy TOPSIS on Serious Game Design Evaluation Framework

    Directory of Open Access Journals (Sweden)

    Chung-Ho Su

    2013-01-01

    Full Text Available This study presents a hybrid methodology for solving the serious game design evaluation in which evaluation criteria are based on meaningful learning, ARCS motivation, cognitive load, and flow theory (MACF by rough set theory (RST and experts’ selection. The purpose of this study tends to develop an evaluation model with RST based fuzzy Delphi-AHP-TOPSIS for MACF characteristics. Fuzzy Delphi method is utilized for selecting the evaluation criteria, Fuzzy AHP is used for analyzing the criteria structure and determining the evaluation weight of criteria, and Fuzzy TOPSIS is applied to determine the sequence of the evaluations. A real case is also used for evaluating the selection of MACF criteria design for four serious games, and both the practice and evaluation of the case could be explained. The results show that the playfulness (C24, skills (C22, attention (C11, and personalized (C35 are determined as the four most important criteria in the MACF selection process. And evaluation results of case study point out that Game 1 has the best score overall (Game 1 > Game 3 > Game 2 > Game 4. Finally, proposed evaluation framework tends to evaluate the effectiveness and the feasibility of the evaluation model and provide design criteria for relevant multimedia game design educators.

  16. Evaluating community-based public health leadership training.

    Science.gov (United States)

    Ceraso, Marion; Gruebling, Kirsten; Layde, Peter; Remington, Patrick; Hill, Barbara; Morzinski, Jeffrey; Ore, Peggy

    2011-01-01

    Addressing the nation's increasingly complex public health challenges will require more effective multisector collaboration and stronger public health leadership. In 2005, the Healthy Wisconsin Leadership Institute launched an annual, year-long intensive "community teams" program. The goal of this program is to develop collaborative leadership and public health skills among Wisconsin-based multisectoral teams mobilizing their communities to improve public health. To measure the scope of participation and program impacts on individual learning and practice, including application of new knowledge and collective achievements of teams on coalition and short-term community outcomes. End-of-year participant program evaluations and follow-up telephone interviews with participants 20 months after program completion. Community-based public health leadership training program. Sixty-eight participants in the Community Teams Program during the years 2006 to 2007 and 2007 to 2008. Professional diversity of program participants; individual learning and practice, including application of new knowledge; and collective achievements of teams, including coalition and short-term community outcomes. Participants in the Community Teams Program represent a diversity of sectors, including nonprofit, governmental, academic, business, and local public health. Participation increased knowledge across all public health and leadership competency areas covered in the program. Participating teams reported outcomes, including increased engagement of community leadership, expansion of preventive services, increased media coverage, strengthened community coalitions, and increased grant funding. Evaluation of this community-based approach to public health leadership training has shown it to be a promising model for building collaborative and public health leadership skills and initiating sustained community change for health improvement.

  17. Comprehensive evaluation of Shahid Motahari Educational Festival during 2008-2013 based on CIPP Evaluation Model

    Directory of Open Access Journals (Sweden)

    SN Hosseini

    2014-09-01

    Full Text Available Introduction: Education quality improvement is one of the main goals of higher education. In this regard, has been provided various solutions such as holding educational Shahid Motahari annual festivals, in order to appreciate of educational process, development and innovation educational processes and procedures, preparation of calibration standards and processes of accrediting educational. The aim of this study was to comprehensive evaluating of educational Shahid Motahari festival during six periods (2008-2013 based on CIPP evaluation model. Method : This cross-sectional study was conducted among the 473 faculty members include deputies and administrators educational, administrators and faculty members of medical education development centers, members of the scientific committee and faculty member’s participants in Shahid Motahari festival from 42 universities medical sciences of Iran. Data collection based on self-report writing questionnaires. Data were analyzed by SPSS version 20 at α=0.05 significant level. Results: The subjects reported 75.13%, 65.33%, 64.5%, and 59.21 % of receivable scores of process, context, input and product, respectively. In addition, there was a direct and significant correlation between all domains . Conclusion : According to the study findings, in the evaluation and correlation of domains models, we can explicitly how to holding festivals was appropriate and the main reason for the poor evaluation in product domain is related to the problems in input and product domains.

  18. Evaluating Pillar Industry's Transformation Capability: A Case Study of Two Chinese Steel-Based Cities.

    Science.gov (United States)

    Li, Zhidong; Marinova, Dora; Guo, Xiumei; Gao, Yuan

    2015-01-01

    Many steel-based cities in China were established between the 1950s and 1960s. After more than half a century of development and boom, these cities are starting to decline and industrial transformation is urgently needed. This paper focuses on evaluating the transformation capability of resource-based cities building an evaluation model. Using Text Mining and the Document Explorer technique as a way of extracting text features, the 200 most frequently used words are derived from 100 publications related to steel- and other resource-based cities. The Expert Evaluation Method (EEM) and Analytic Hierarchy Process (AHP) techniques are then applied to select 53 indicators, determine their weights and establish an index system for evaluating the transformation capability of the pillar industry of China's steel-based cities. Using real data and expert reviews, the improved Fuzzy Relation Matrix (FRM) method is applied to two case studies in China, namely Panzhihua and Daye, and the evaluation model is developed using Fuzzy Comprehensive Evaluation (FCE). The cities' abilities to carry out industrial transformation are evaluated with concerns expressed for the case of Daye. The findings have policy implications for the potential and required industrial transformation in the two selected cities and other resource-based towns.

  19. Surface Water Quality Evaluation Based on a Game Theory-Based Cloud Model

    Directory of Open Access Journals (Sweden)

    Bing Yang

    2018-04-01

    Full Text Available Water quality evaluation is an essential measure to analyze water quality. However, excessive randomness and fuzziness affect the process of evaluation, thus reducing the accuracy of evaluation. Therefore, this study proposed a cloud model for evaluating the water quality to alleviate this problem. Analytic hierarchy process and entropy theory were used to calculate the subjective weight and objective weight, respectively, and then they were coupled as a combination weight (CW via game theory. The proposed game theory-based cloud model (GCM was then applied to the Qixinggang section of the Beijiang River. The results show that the CW ranks fecal coliform as the most important factor, followed by total nitrogen and total phosphorus, while biochemical oxygen demand and fluoride were considered least important. There were 19 months (31.67% at grade I, 39 months (65.00% at grade II, and one month at grade IV and grade V during 2010–2014. A total of 52 months (86.6% of GCM were identical to the comprehensive evaluation result (CER. The obtained water quality grades of GCM are close to the grades of the analytic hierarchy process weight (AHPW due to the weight coefficient of AHPW set to 0.7487. Generally, one or two grade gaps exist among the results of the three groups of weights, suggesting that the index weight is not particularly sensitive to the cloud model. The evaluated accuracy of water quality can be improved by modifying the quantitative boundaries. This study could provide a reference for water quality evaluation, prevention, and improvement of water quality assessment and other applications.

  20. Guidelines for reporting evaluations based on observational methodology.

    Science.gov (United States)

    Portell, Mariona; Anguera, M Teresa; Chacón-Moscoso, Salvador; Sanduvete-Chaves, Susana

    2015-01-01

    Observational methodology is one of the most suitable research designs for evaluating fidelity of implementation, especially in complex interventions. However, the conduct and reporting of observational studies is hampered by the absence of specific guidelines, such as those that exist for other evaluation designs. This lack of specific guidance poses a threat to the quality and transparency of these studies and also constitutes a considerable publication hurdle. The aim of this study thus was to draw up a set of proposed guidelines for reporting evaluations based on observational methodology. The guidelines were developed by triangulating three sources of information: observational studies performed in different fields by experts in observational methodology, reporting guidelines for general studies and studies with similar designs to observational studies, and proposals from experts in observational methodology at scientific meetings. We produced a list of guidelines grouped into three domains: intervention and expected outcomes, methods, and results. The result is a useful, carefully crafted set of simple guidelines for conducting and reporting observational studies in the field of program evaluation.

  1. Learners’ Evaluation Based on Data Mining in a Web Based Learning Environment

    Directory of Open Access Journals (Sweden)

    İdris GÖKSU

    2015-06-01

    Full Text Available This study has been done in order to determine the efficiency level in the extend of learners’ evaluation by means of comparing the Web Based Learning (WBL with traditional face to face learning. In this respect, the effect of WBL and traditional environment has been analyzed in the class of Visual Programming I, and the learners have been evaluated with the rule based data mining method in a WBL environment. The study has been conducted according to experimental design with pre-test and post-test groups. Experimental group has attended the class in WBL environment, and the control group in a traditional class environment. In accordance with the pre-test and post-test scores of experimental and control groups, both methods have been proved to be effective. According the average scores of post-test, the learners in experimental groups have been more successful than the ones in the control group. The guiding of WBL system prepared for the study has been found to be significant in terms of both underlining the points in which the learners are unsuccessful in a short time and having trust in the system technically.

  2. Symptoms-Based Evaluation of Iron Deficiency Anemia in Students ...

    African Journals Online (AJOL)

    Original Research Article. Symptoms-Based ... cravings, 22.33 % (46); and angular stomatitis 18.97 % (39). ... [6]. Pregnancy fallouts in an overall surplus iron constraint is about 1000 mg [7]. .... Evaluation of the Health-related Quality of Life of.

  3. The Study on Food Sensory Evaluation based on Particle Swarm Optimization Algorithm

    OpenAIRE

    Hairong Wang; Huijuan Xu

    2015-01-01

    In this study, it explores the procedures and methods of the system for establishing food sensory evaluation based on particle swarm optimization algorithm, by means of explaining the interpretation of sensory evaluation and sensory analysis, combined with the applying situation of sensory evaluation in food industry.

  4. Facilitating Evaluations of Innovative, Competence-Based Assessments: Creating Understanding and Involving Multiple Stakeholders

    Science.gov (United States)

    Gulikers, Judith T. M.; Baartman, Liesbeth K. J.; Biemans, Harm J. A.

    2010-01-01

    Schools are held more responsible for evaluating, quality assuring and improving their student assessments. Teachers' lack of understanding of new, competence-based assessments as well as the lack of key stakeholders' involvement, hamper effective and efficient self-evaluations by teachers of innovative, competence-based assessments (CBAs). While…

  5. Fluorescence-based bioassays for the detection and evaluation of food materials.

    Science.gov (United States)

    Nishi, Kentaro; Isobe, Shin-Ichiro; Zhu, Yun; Kiyama, Ryoiti

    2015-10-13

    We summarize here the recent progress in fluorescence-based bioassays for the detection and evaluation of food materials by focusing on fluorescent dyes used in bioassays and applications of these assays for food safety, quality and efficacy. Fluorescent dyes have been used in various bioassays, such as biosensing, cell assay, energy transfer-based assay, probing, protein/immunological assay and microarray/biochip assay. Among the arrays used in microarray/biochip assay, fluorescence-based microarrays/biochips, such as antibody/protein microarrays, bead/suspension arrays, capillary/sensor arrays, DNA microarrays/polymerase chain reaction (PCR)-based arrays, glycan/lectin arrays, immunoassay/enzyme-linked immunosorbent assay (ELISA)-based arrays, microfluidic chips and tissue arrays, have been developed and used for the assessment of allergy/poisoning/toxicity, contamination and efficacy/mechanism, and quality control/safety. DNA microarray assays have been used widely for food safety and quality as well as searches for active components. DNA microarray-based gene expression profiling may be useful for such purposes due to its advantages in the evaluation of pathway-based intracellular signaling in response to food materials.

  6. Fluorescence-Based Bioassays for the Detection and Evaluation of Food Materials

    Directory of Open Access Journals (Sweden)

    Kentaro Nishi

    2015-10-01

    Full Text Available We summarize here the recent progress in fluorescence-based bioassays for the detection and evaluation of food materials by focusing on fluorescent dyes used in bioassays and applications of these assays for food safety, quality and efficacy. Fluorescent dyes have been used in various bioassays, such as biosensing, cell assay, energy transfer-based assay, probing, protein/immunological assay and microarray/biochip assay. Among the arrays used in microarray/biochip assay, fluorescence-based microarrays/biochips, such as antibody/protein microarrays, bead/suspension arrays, capillary/sensor arrays, DNA microarrays/polymerase chain reaction (PCR-based arrays, glycan/lectin arrays, immunoassay/enzyme-linked immunosorbent assay (ELISA-based arrays, microfluidic chips and tissue arrays, have been developed and used for the assessment of allergy/poisoning/toxicity, contamination and efficacy/mechanism, and quality control/safety. DNA microarray assays have been used widely for food safety and quality as well as searches for active components. DNA microarray-based gene expression profiling may be useful for such purposes due to its advantages in the evaluation of pathway-based intracellular signaling in response to food materials.

  7. Deterministic and fuzzy-based methods to evaluate community resilience

    Science.gov (United States)

    Kammouh, Omar; Noori, Ali Zamani; Taurino, Veronica; Mahin, Stephen A.; Cimellaro, Gian Paolo

    2018-04-01

    Community resilience is becoming a growing concern for authorities and decision makers. This paper introduces two indicator-based methods to evaluate the resilience of communities based on the PEOPLES framework. PEOPLES is a multi-layered framework that defines community resilience using seven dimensions. Each of the dimensions is described through a set of resilience indicators collected from literature and they are linked to a measure allowing the analytical computation of the indicator's performance. The first method proposed in this paper requires data on previous disasters as an input and returns as output a performance function for each indicator and a performance function for the whole community. The second method exploits a knowledge-based fuzzy modeling for its implementation. This method allows a quantitative evaluation of the PEOPLES indicators using descriptive knowledge rather than deterministic data including the uncertainty involved in the analysis. The output of the fuzzy-based method is a resilience index for each indicator as well as a resilience index for the community. The paper also introduces an open source online tool in which the first method is implemented. A case study illustrating the application of the first method and the usage of the tool is also provided in the paper.

  8. The evaluation of a web-based incident reporting system.

    Science.gov (United States)

    Kuo, Ya-Hui; Lee, Ting-Ting; Mills, Mary Etta; Lin, Kuan-Chia

    2012-07-01

    A Web-based reporting system is essential to report incident events anonymously and confidentially. The purpose of this study was to evaluate a Web-based reporting system in Taiwan. User satisfaction and impact of system use were evaluated through a survey answered by 249 nurses. Incident events reported in paper and electronic systems were collected for comparison purposes. Study variables included system user satisfaction, willingness to report, number of reports, severity of the events, and efficiency of the reporting process. Results revealed that senior nurses were less willing to report events, nurses on internal medicine units had higher satisfaction than others, and lowest satisfaction was related to the time it took to file a report. In addition, the Web-based reporting system was used more often than the paper system. The percentages of events reported were significantly higher in the Web-based system in laboratory, environment/device, and incidents occurring in other units, whereas the proportions of reports involving bedsores and dislocation of endotracheal tubes were decreased. Finally, moderate injury event reporting decreased, whereas minor or minimal injury event reporting increased. The study recommends that the data entry process be simplified and the network system be improved to increase user satisfaction and reporting rates.

  9. Evaluating Extension Based Leadership Development Programs in the Southern United States

    Science.gov (United States)

    Lamm, Kevan W.; Carter, Hannah S.; Lamm, Alexa J.

    2016-01-01

    The ability to evaluate and accurately articulate the outcomes associated with leadership development programs is critical to their continued financial and administrative support. With calls for outcome-based accountability, the need for rigorous evaluation is particularly relevant for those programs administered through the Cooperative Extension…

  10. Study on team evaluation (5). On application of behavior observation-based teamwork evaluation sheet for power plant operator team

    International Nuclear Information System (INIS)

    Sasou, Kunihide; Sugihara, Yoshikuni

    2009-01-01

    This report discusses the range of application of the behavior observation-based teamwork evaluation sheet. Under the concept of this method, teamwork evaluation sheet is developed, which assumes a certain single failure (failure of feed water transmitter). The evaluation sheets are applied to evaluate team work of 26 thermal power plant operator teams in combined under abnormal operating conditions of failure of feed water transmitter, feed draft fan or steam flow governor. As a result of ANOVA, it finds that there are no differences between 3 kinds of single failure. In addition, the similar analysis is executed to 3 kinds of multiple failures (steam generator tube rapture, loss of coolant accident and loss of secondary coolant accident) under which 7 PWR nuclear power plant operator teams are evaluated. As a result, ANOVA shows no differences between 3 kinds of multiple failures. These results indicate that a behavior observation-based team work evaluation sheet, which is designed for a certain abnormal condition, is applicable to the abnormal conditions that have the same development of abnormal conditions. (author)

  11. Using satellite imagery to evaluate land-based camouflage assets

    CSIR Research Space (South Africa)

    Baumbach, J

    2006-02-01

    Full Text Available to Evaluate Land-based Camouflage Assets J BAUMBACH, M LUBBE CSIR Defence, Peace, Safety and security, PO Box 395, Pretoria, 0001, South Africa Email: jbaumbac@csir.co.za ABSTRACT A camouflage field trial experiment was conducted. For the experiment... analysis, change detection, un-supervised classification, supervised classification and object based classification. RESULTS The following table shows a summary of the different targets, and whether it was detected ( ) or not detected (x), using...

  12. Evaluation of upper limb muscle fatigue based on surface electromyography.

    Science.gov (United States)

    Zhou, Qianxiang; Chen, Yuhong; Ma, Chao; Zheng, Xiaohui

    2011-10-01

    Fatigue is believed to be a major contributory factor to occupational injuries in machine operators. The development of accurate and usable techniques to measure operator fatigue is therefore important. In this study, we used a novel method based on surface electromyography (sEMG) of the biceps brachii and the Borg scale to evaluate local muscle fatigue in the upper limb after isometric muscle action. Thirteen young males performed isometric actions with the upper limb at different force levels. sEMG activities of the biceps brachii were recorded during the actions. Borg scales were used to evaluate the subjective sensation of local fatigue of the biceps brachii after the actions. sEMG activities were analyzed using the one-third band octave method, and an equation to determine the degree of fatigue was derived based on the relationship between the variable and the Borg scale. The results showed that the relationship could be expressed by a conic curve, and could be used to evaluate muscle fatigue during machine operation.

  13. An Evaluation of Wind Turbine Technology at Peterson Air Force Base

    Science.gov (United States)

    2005-03-01

    by the wind speed. Darrieus turbines are ordinarily inexpensive and are used for electricity generation and irrigation. One advantage to a...AN EVALUATION OF WIND TURBINE TECHNOLOGY...02 AN EVALUATION OF WIND TURBINE TECHNOLOGY AT PETERSON AIR FORCE BASE THESIS Presented to the Faculty Department of

  14. Catchment area-based evaluation of the AMC-dependent SCS-CN-based rainfall-runoff models

    Science.gov (United States)

    Mishra, S. K.; Jain, M. K.; Pandey, R. P.; Singh, V. P.

    2005-09-01

    Using a large set of rainfall-runoff data from 234 watersheds in the USA, a catchment area-based evaluation of the modified version of the Mishra and Singh (2002a) model was performed. The model is based on the Soil Conservation Service Curve Number (SCS-CN) methodology and incorporates the antecedent moisture in computation of direct surface runoff. Comparison with the existing SCS-CN method showed that the modified version performed better than did the existing one on the data of all seven area-based groups of watersheds ranging from 0.01 to 310.3 km2.

  15. Evaluation of Virtual Teaching-Learning Environments based on usability standards

    Directory of Open Access Journals (Sweden)

    Jose I. Cocunubo-Suarez

    2018-01-01

    Full Text Available The main objective of this review article is to determine the necessary sub-characteristics or aspects for the evaluation of Virtual Teaching-Learning Environments (VTLEs as final or finished products based on ISO 9126, 14598 and 25000-SQuaRE standards. A systematic information search was carried out. A total of 108 documents were retrieved about subjects such as web usability, virtual learning environments, usability, educational software, educational web evaluation, usability evaluation and web usability evaluation. Out of the 108 documents, 70 were selected by inclusion and exclusion analysis. The eight subfeatures of greater statistical frequency were identified among the subset of documents and then integrated as a proposal for standard 25000-SQuaRE.

  16. Performance Evaluation of Air-Based Heat Rejection Systems

    Directory of Open Access Journals (Sweden)

    Hannes Fugmann

    2015-01-01

    Full Text Available On the basis of the Number of Transfer Units (NTU method a functional relation between electric power for fans/pumps and effectiveness in dry coolers and wet cooling towers is developed. Based on this relation, a graphical presentation method of monitoring and simulation data of heat rejection units is introduced. The functional relation allows evaluating the thermodynamic performance of differently sized heat rejection units and comparing performance among them. The method is used to evaluate monitoring data of dry coolers of different solar cooling field projects. The novelty of this approach is that performance rating is not limited by a design point or standardized operating conditions of the heat exchanger, but is realizable under flexible conditions.

  17. Evaluation of Topical Gel Bases Formulated with Various Essential ...

    African Journals Online (AJOL)

    Evaluation of Topical Gel Bases Formulated with Various Essential Oils for Antibacterial Activity against Methicillin- Resistant Staphylococcus Aureus. ... Lemon grass and thyme oils were chosen for further studies, including analysis of their composition by gas chromatography–mass spectrometry (GC/MS). Gels were ...

  18. Monte Carlo evaluation of derivative-based global sensitivity measures

    International Nuclear Information System (INIS)

    Kucherenko, S.; Rodriguez-Fernandez, M.; Pantelides, C.; Shah, N.

    2009-01-01

    A novel approach for evaluation of derivative-based global sensitivity measures (DGSM) is presented. It is compared with the Morris and the Sobol' sensitivity indices methods. It is shown that there is a link between DGSM and Sobol' sensitivity indices. DGSM are very easy to implement and evaluate numerically. The computational time required for numerical evaluation of DGSM is many orders of magnitude lower than that for estimation of the Sobol' sensitivity indices. It is also lower than that for the Morris method. Efficiencies of Monte Carlo (MC) and quasi-Monte Carlo (QMC) sampling methods for calculation of DGSM are compared. It is shown that the superiority of QMC over MC depends on the problem's effective dimension, which can also be estimated using DGSM.

  19. Performance evaluation of the insurance companies based on AHP

    Science.gov (United States)

    Lu, Manhong; Zhu, Kunping

    2018-04-01

    With the entry of foreign capital, China's insurance industry is under increasing pressure of competition. The performance of a company is the external manifestation of its comprehensive strength. Therefore, the establishment of a scientific evaluation system is of practical significance for the insurance companies. In this paper, based on the financial and non-financial indicators of the companies, the performance evaluation system is constructed by means of the analytic hierarchy process (AHP). In the system, the weights of the indicators which represent the impact on the performance of the companies will be calculated by the process. The evaluation system is beneficial for the companies to realize their own strengths and weaknesses, so as to take steps to enhance the core competitiveness of the companies.

  20. Evaluation of computer-based NDE techniques and regional support of inspection activities

    International Nuclear Information System (INIS)

    Taylor, T.T.; Kurtz, R.J.; Heasler, P.G.; Doctor, S.R.

    1991-01-01

    This paper describes the technical progress during fiscal year 1990 for the program entitled 'Evaluation of Computer-Based nondestructive evaluation (NDE) Techniques and Regional Support of Inspection Activities.' Highlights of the technical progress include: development of a seminar to provide basic knowledge required to review and evaluate computer-based systems; review of a typical computer-based field procedure to determine compliance with applicable codes, ambiguities in procedure guidance, and overall effectiveness and utility; design and fabrication of a series of three test blocks for NRC staff use for training or audit of UT systems; technical assistance in reviewing (1) San Onofre ten year reactor pressure vessel inservice inspection activities and (2) the capability of a proposed phased array inspection of the feedwater nozzle at Oyster Creek; completion of design calculations to determine the feasibility and significance of various sizes of mockup assemblies that could be used to evaluate the effectiveness of eddy current examinations performed on steam generators; and discussion of initial mockup design features and methods for fabricating flaws in steam generator tubes

  1. IDIOS: An innovative index for evaluating dental imaging-based osteoporosis screening indices

    Energy Technology Data Exchange (ETDEWEB)

    Barngkgei, Imad; Al Haffar, Iyad; Khattab, Razan [Faculty of Dentistry, Damascus University, Damascus (Syrian Arab Republic); Halboub, Esam; Almashraqi, Abeer Abdulkareem [Dept. of Maxillofacial Surgery and Diagnostic Sciences, College of Dentistry, Jazan University, Jazan (Saudi Arabia)

    2016-09-15

    The goal of this study was to develop a new index as an objective reference for evaluating current and newly developed indices used for osteoporosis screening based on dental images. Its name; IDIOS, stands for Index of Dental-imaging Indices of Osteoporosis Screening. A comprehensive PubMed search was conducted to retrieve studies on dental imaging-based indices for osteoporosis screening. The results of the eligible studies, along with other relevant criteria, were used to develop IDIOS, which has scores ranging from 0 (0%) to 15 (100%). The indices presented in the studies we included were then evaluated using IDIOS. The 104 studies that were included utilized 24, 4, and 9 indices derived from panoramic, periapical, and computed tomographic/cone-beam computed tomographic techniques, respectively. The IDIOS scores for these indices ranged from 0 (0%) to 11.75 (78.32%). IDIOS is a valuable reference index that facilitates the evaluation of other dental imaging-based osteoporosis screening indices. Furthermore, IDIOS can be utilized to evaluate the accuracy of newly developed indices.

  2. IDIOS: An innovative index for evaluating dental imaging-based osteoporosis screening indices.

    Science.gov (United States)

    Barngkgei, Imad; Halboub, Esam; Almashraqi, Abeer Abdulkareem; Khattab, Razan; Al Haffar, Iyad

    2016-09-01

    The goal of this study was to develop a new index as an objective reference for evaluating current and newly developed indices used for osteoporosis screening based on dental images. Its name; IDIOS, stands for Index of Dental-imaging Indices of Osteoporosis Screening. A comprehensive PubMed search was conducted to retrieve studies on dental imaging-based indices for osteoporosis screening. The results of the eligible studies, along with other relevant criteria, were used to develop IDIOS, which has scores ranging from 0 (0%) to 15 (100%). The indices presented in the studies we included were then evaluated using IDIOS. The 104 studies that were included utilized 24, 4, and 9 indices derived from panoramic, periapical, and computed tomographic/cone-beam computed tomographic techniques, respectively. The IDIOS scores for these indices ranged from 0 (0%) to 11.75 (78.32%). IDIOS is a valuable reference index that facilitates the evaluation of other dental imaging-based osteoporosis screening indices. Furthermore, IDIOS can be utilized to evaluate the accuracy of newly developed indices.

  3. IDIOS: An innovative index for evaluating dental imaging-based osteoporosis screening indices

    International Nuclear Information System (INIS)

    Barngkgei, Imad; Al Haffar, Iyad; Khattab, Razan; Halboub, Esam; Almashraqi, Abeer Abdulkareem

    2016-01-01

    The goal of this study was to develop a new index as an objective reference for evaluating current and newly developed indices used for osteoporosis screening based on dental images. Its name; IDIOS, stands for Index of Dental-imaging Indices of Osteoporosis Screening. A comprehensive PubMed search was conducted to retrieve studies on dental imaging-based indices for osteoporosis screening. The results of the eligible studies, along with other relevant criteria, were used to develop IDIOS, which has scores ranging from 0 (0%) to 15 (100%). The indices presented in the studies we included were then evaluated using IDIOS. The 104 studies that were included utilized 24, 4, and 9 indices derived from panoramic, periapical, and computed tomographic/cone-beam computed tomographic techniques, respectively. The IDIOS scores for these indices ranged from 0 (0%) to 11.75 (78.32%). IDIOS is a valuable reference index that facilitates the evaluation of other dental imaging-based osteoporosis screening indices. Furthermore, IDIOS can be utilized to evaluate the accuracy of newly developed indices

  4. Trial-based economic evaluations in occupational health: principles, methods, and recommendations.

    Science.gov (United States)

    van Dongen, Johanna M; van Wier, Marieke F; Tompa, Emile; Bongers, Paulien M; van der Beek, Allard J; van Tulder, Maurits W; Bosmans, Judith E

    2014-06-01

    To allocate available resources as efficiently as possible, decision makers need information on the relative economic merits of occupational health and safety (OHS) interventions. Economic evaluations can provide this information by comparing the costs and consequences of alternatives. Nevertheless, only a few of the studies that consider the effectiveness of OHS interventions take the extra step of considering their resource implications. Moreover, the methodological quality of those that do is generally poor. Therefore, this study aims to help occupational health researchers conduct high-quality trial-based economic evaluations by discussing the theory and methodology that underlie them, and by providing recommendations for good practice regarding their design, analysis, and reporting. This study also helps consumers of this literature with understanding and critically appraising trial-based economic evaluations of OHS interventions.

  5. Review and Evaluation of Mindfulness-Based iPhone Apps

    OpenAIRE

    Mani, Madhavan; Kavanagh, David J; Hides, Leanne; Stoyanov, Stoyan R

    2015-01-01

    Background There is growing evidence for the positive impact of mindfulness on wellbeing. Mindfulness-based mobile apps may have potential as an alternative delivery medium for training. While there are hundreds of such apps, there is little information on their quality. Objective This study aimed to conduct a systematic review of mindfulness-based iPhone mobile apps and to evaluate their quality using a recently-developed expert rating scale, the Mobile Application Rating Scale (MARS). It al...

  6. Robustness-based evaluation of hydropower infrastructure design under climate change

    Directory of Open Access Journals (Sweden)

    Mehmet Ümit Taner

    2017-01-01

    Full Text Available The conventional tools of decision-making in water resources infrastructure planning have been developed for problems with well-characterized uncertainties and are ill-suited for problems involving climate nonstationarity. In the past 20 years, a predict-then-act-based approach to the incorporation of climate nonstationarity has been widely adopted in which the outputs of bias-corrected climate model projections are used to evaluate planning options. However, the ambiguous nature of results has often proved unsatisfying to decision makers. This paper presents the use of a bottom-up, decision scaling framework for the evaluation of water resources infrastructure design alternatives regarding their robustness to climate change and expected value of performance. The analysis begins with an assessment of the vulnerability of the alternative designs under a wide domain of systematically-generated plausible future climates and utilizes downscaled climate projections ex post to inform likelihoods within a risk-based evaluation. The outcomes under different project designs are compared by way of a set of decision criteria, including the performance under the most likely future, expected value of performance across all evaluated futures and robustness. The method is demonstrated for the design of a hydropower system in sub-Saharan Africa and is compared to the results that would be found using a GCM-based, scenario-led analysis. The results indicate that recommendations from the decision scaling analysis can be substantially different from the scenario-led approach, alleviate common shortcomings related to the use of climate projections in water resources planning, and produce recommendations that are more robust to future climate uncertainty.

  7. Optimization evaluation of cutting technology based on mechanical parts

    Science.gov (United States)

    Wang, Yu

    2018-04-01

    The relationship between the mechanical manufacturing process and the carbon emission is studied on the basis of the process of the mechanical manufacturing process. The formula of carbon emission calculation suitable for mechanical manufacturing process is derived. Based on this, a green evaluation method for cold machining process of mechanical parts is proposed. The application verification and data analysis of the proposed evaluation method are carried out by an example. The results show that there is a great relationship between the mechanical manufacturing process data and carbon emissions.

  8. 75 FR 13305 - Comment Request for Information Collection for Evaluation of the Technology-Based Learning Grants...

    Science.gov (United States)

    2010-03-19

    ... Collection for Evaluation of the Technology-Based Learning Grants: New Collection AGENCY: Employment and... Technology- Based Learning Grants Evaluation. A copy of the proposed information collection request (ICR) can... INFORMATION: I. Background The Evaluation of the Technology-Based Learning (TBL) Grants is a two-year...

  9. Evaluation of an app-based stress protocol

    Directory of Open Access Journals (Sweden)

    Noeh Claudius

    2016-09-01

    Full Text Available Stress is a major influence on the quality of life in our fast-moving society. This paper describes a standardized and contemporary protocol that is capable of inducing moderate psychological stress in a laboratory setting. Furthermore, it evaluates its effects on physiological biomarkers. The protocol called “THM-Stresstest” mainly consists of a rest period (30 min, an app-based stress test under the surveillance of an audience (4 min and a regeneration period (32 min. We investigated 12 subjects to evaluate the developed protocol. We could show significant changes in heart rate variability, electromyography, electro dermal activity and salivary cortisol and α-amylase. From this data we conclude that the THM-Stresstest can serve as a psychobiological tool for provoking responses in the cardiovascular-, the endocrine and exocrine system as well as the sympathetic part of the central nervous system.

  10. THE EVALUATION OF LEARNING BASED ON SKILLS AT THE PRESCHOOL LEVEL

    OpenAIRE

    Oralia Ortiz Varela; Efrén Viramontes Anaya; Alma Delia Campos Arroyo

    2013-01-01

    The research is about learning evaluation based on competencies in a mixed group of Preschool level: Melchor Ocampo in Delicias Chihuahua city. The most important theoretical foundations were provided by Casanova (1998), in relation to the assessment, and Diaz Barriga (2003 and 2006), with teaching in competencies and didactic strategies. The research objective is to track systematically the evaluation of competencies as well as design and experiment alternatives for evaluation in pres...

  11. Designing and evaluating risk-based surveillance systems

    DEFF Research Database (Denmark)

    Willeberg, Preben; Nielsen, Liza Rosenbaum; Salman, Mo

    2012-01-01

    Risk-based surveillance systems reveal occurrence of disease or infection in a sample of population units, which are selected on the basis of risk factors for the condition under study. The purpose of such systems for supporting practical animal disease policy formulations and management decisions...... with prudent use of resources while maintaining acceptable system performance. High-risk category units are selected for testing by identification of the presence of specific high-risk factor(s), while disregarding other factors that might also influence the risk. On this basis we argue that the most...... applicable risk estimate for use in designing and evaluating a risk-based surveillance system would be a crude (unadjusted) relative risk, odds ratio or apparent prevalence. Risk estimates found in the published literature, however, are often the results of multivariable analyses implicitly adjusting...

  12. Evaluating diffraction-based overlay

    Science.gov (United States)

    Li, Jie; Tan, Asher; Jung, JinWoo; Goelzer, Gary; Smith, Nigel; Hu, Jiangtao; Ham, Boo-Hyun; Kwak, Min-Cheol; Kim, Cheol-Hong; Nam, Suk-Woo

    2012-03-01

    We evaluate diffraction-based overlay (DBO) metrology using two test wafers. The test wafers have different film stacks designed to test the quality of DBO data under a range of film conditions. We present DBO results using traditional empirical approach (eDBO). eDBO relies on linear response of the reflectance with respect to the overlay displacement within a small range. It requires specially designed targets that consist of multiple pads with programmed shifts. It offers convenience of quick recipe setup since there is no need to establish a model. We measure five DBO targets designed with different pitches and programmed shifts. The correlations of five eDBO targets and the correlation of eDBO to image-based overlay are excellent. The targets of 800nm and 600nm pitches have better dynamic precision than targets of 400nm pitch, which agrees with simulated results on signal/noise ratio. 3σ of less than 0.1nm is achieved for both wafers using the best configured targets. We further investigate the linearity assumption of eDBO algorithm. Simulation results indicate that as the pitch of DBO targets gets smaller, the nonlinearity error, i.e., the error in the overlay measurement results caused by deviation from ideal linear response, becomes bigger. We propose a nonlinearity correction (NLC) by including higher order terms in the optical response. The new algorithm with NLC improves measurement consistency for DBO targets of same pitch but different programmed shift, due to improved accuracy. The results from targets with different pitches, however, are improved marginally, indicating the presence of other error sources.

  13. Module-based quality system functionality evaluation in production logistics

    Energy Technology Data Exchange (ETDEWEB)

    Khabbazi, M.R.; Wikander, J.; Onori, M.; Maffei, A.; Chen, D.

    2016-07-01

    This paper addresses a comprehensive modeling and functionality evaluation of a module-based quality system in production logistics at the highest domain abstract level of business processes. All domain quality business processes and quality data transactions are modeled using BPMN and UML tools and standards at the business process and data modeling. A modular web-based prototype is developed to evaluate the models addressing the quality information system functionality requirements and modularity in production logistics through data scenarios and data queries. Using the object-oriented technique in design at the highest domain level, the proposed models are subject further development in the lower levels for the implementing case. The models are specifically able to manipulate all quality operations including remedy and control in a lot-based make-to-order production logistics system as an individual module. Due to the specification of system as domain design structure, all proposed BPMs, data models, and the actual database prototype are seen referential if not a solution as a practical “to-be” quality business process re-engineering template. This paper sets out to provide an explanatory approach using different practical technique at modeling steps as well as the prototype implementation. (Author)

  14. An evaluation of the hemiplegic subject based on the Bobath approach. Part II: The evaluation protocol.

    Science.gov (United States)

    Corriveau, H; Guarna, F; Dutil, E; Riley, E; Arsenault, A B; Drouin, G

    1988-01-01

    A protocol of evaluation of the hemiplegic patient based on the Bobath approach to treatment is presented. Six parameters are evaluated: sensorium, muscle tone, reflex activity, active movement, postural reactions and pain. The first and last of these are included because of their possible effects on the motor recovery process of the hemiplegic patient. The other four are directly borrowed from the Bobath modality of treatment. For each of these parameters, the procedures are given for its evaluation along with its respective rating scales. These scales are of an ordinal nature ranging from 0 to 3. It is suggested that this new evaluation protocol is fully compatible with the therapeutic modality developed by Bobath and as well is adequate to quantify patient progress in the principle aspects treated by this well used rehabilitation approach.

  15. Reliability Evaluation of Machine Center Components Based on Cascading Failure Analysis

    Science.gov (United States)

    Zhang, Ying-Zhi; Liu, Jin-Tong; Shen, Gui-Xiang; Long, Zhe; Sun, Shu-Guang

    2017-07-01

    In order to rectify the problems that the component reliability model exhibits deviation, and the evaluation result is low due to the overlook of failure propagation in traditional reliability evaluation of machine center components, a new reliability evaluation method based on cascading failure analysis and the failure influenced degree assessment is proposed. A direct graph model of cascading failure among components is established according to cascading failure mechanism analysis and graph theory. The failure influenced degrees of the system components are assessed by the adjacency matrix and its transposition, combined with the Pagerank algorithm. Based on the comprehensive failure probability function and total probability formula, the inherent failure probability function is determined to realize the reliability evaluation of the system components. Finally, the method is applied to a machine center, it shows the following: 1) The reliability evaluation values of the proposed method are at least 2.5% higher than those of the traditional method; 2) The difference between the comprehensive and inherent reliability of the system component presents a positive correlation with the failure influenced degree of the system component, which provides a theoretical basis for reliability allocation of machine center system.

  16. Color Image Evaluation for Small Space Based on FA and GEP

    Directory of Open Access Journals (Sweden)

    Li Deng

    2014-01-01

    Full Text Available Aiming at the problem that color image is difficult to quantify, this paper proposes an evaluation method of color image for small space based on factor analysis (FA and gene expression programming (GEP and constructs a correlation model between color image factors and comprehensive color image. The basic color samples of small space and color images are evaluated by semantic differential method (SD method, color image factors are selected via dimension reduction in FA, factor score function is established, and by combining the entropy weight method to determine each factor weights then the comprehensive color image score is calculated finally. The best fitting function between color image factors and comprehensive color image is obtained by GEP algorithm, which can predict the users’ color image values. A color image evaluation system for small space is developed based on this model. The color evaluation of a control room on AC frequency conversion rig is taken as an example, verifying the effectiveness of the proposed method. It also can assist the designers in other color designs and provide a fast evaluation tool for testing users’ color image.

  17. Evaluation model based on FAHP for nuclear power project contract performance

    International Nuclear Information System (INIS)

    Liu Bohang; Cheng Jing

    2012-01-01

    Fuzzy Comprehensive Evaluation is a common tool to analyze comprehensive integration. Fuzzy Analytic Hierarchy Process is an improvement for Analytic Hierarchy Process. Firstly the paper pointed out the concept of FAHP, and then used FAHP to setup an evaluation system model for nuclear power project contract performance. Based on this model, all the evaluation factors were assigned to different weightiness. By weighting the score of each factor, output would be the result which could evaluate the contract performance. On the basis of the research, the paper gave the principle of evaluating contract performance of nuclear power suppliers, which can assure the procurement process. (authors)

  18. A novel knowledge-based potential for RNA 3D structure evaluation

    Science.gov (United States)

    Yang, Yi; Gu, Qi; Zhang, Ben-Gong; Shi, Ya-Zhou; Shao, Zhi-Gang

    2018-03-01

    Ribonucleic acids (RNAs) play a vital role in biology, and knowledge of their three-dimensional (3D) structure is required to understand their biological functions. Recently structural prediction methods have been developed to address this issue, but a series of RNA 3D structures are generally predicted by most existing methods. Therefore, the evaluation of the predicted structures is generally indispensable. Although several methods have been proposed to assess RNA 3D structures, the existing methods are not precise enough. In this work, a new all-atom knowledge-based potential is developed for more accurately evaluating RNA 3D structures. The potential not only includes local and nonlocal interactions but also fully considers the specificity of each RNA by introducing a retraining mechanism. Based on extensive test sets generated from independent methods, the proposed potential correctly distinguished the native state and ranked near-native conformations to effectively select the best. Furthermore, the proposed potential precisely captured RNA structural features such as base-stacking and base-pairing. Comparisons with existing potential methods show that the proposed potential is very reliable and accurate in RNA 3D structure evaluation. Project supported by the National Science Foundation of China (Grants Nos. 11605125, 11105054, 11274124, and 11401448).

  19. A simulation training evaluation method for distribution network fault based on radar chart

    Directory of Open Access Journals (Sweden)

    Yuhang Xu

    2018-01-01

    Full Text Available In order to solve the problem of automatic evaluation of dispatcher fault simulation training in distribution network, a simulation training evaluation method based on radar chart for distribution network fault is proposed. The fault handling information matrix is established to record the dispatcher fault handling operation sequence and operation information. The four situations of the dispatcher fault isolation operation are analyzed. The fault handling anti-misoperation rule set is established to describe the rules prohibiting dispatcher operation. Based on the idea of artificial intelligence reasoning, the feasibility of dispatcher fault handling is described by the feasibility index. The relevant factors and evaluation methods are discussed from the three aspects of the fault handling result feasibility, the anti-misoperation correctness and the operation process conciseness. The detailed calculation formula is given. Combining the independence and correlation between the three evaluation angles, a comprehensive evaluation method of distribution network fault simulation training based on radar chart is proposed. The method can comprehensively reflect the fault handling process of dispatchers, and comprehensively evaluate the fault handling process from various angles, which has good practical value.

  20. Experimental evaluation of ontology-based HIV/AIDS frequently asked question retrieval system.

    Science.gov (United States)

    Ayalew, Yirsaw; Moeng, Barbara; Mosweunyane, Gontlafetse

    2018-05-01

    This study presents the results of experimental evaluations of an ontology-based frequently asked question retrieval system in the domain of HIV and AIDS. The main purpose of the system is to provide answers to questions on HIV/AIDS using ontology. To evaluate the effectiveness of the frequently asked question retrieval system, we conducted two experiments. The first experiment focused on the evaluation of the quality of the ontology we developed using the OQuaRE evaluation framework which is based on software quality metrics and metrics designed for ontology quality evaluation. The second experiment focused on evaluating the effectiveness of the ontology in retrieving relevant answers. For this we used an open-source information retrieval platform, Terrier, with retrieval models BM25 and PL2. For the measurement of performance, we used the measures mean average precision, mean reciprocal rank, and precision at 5. The results suggest that frequently asked question retrieval with ontology is more effective than frequently asked question retrieval without ontology in the domain of HIV/AIDS.

  1. Experimental Simulation-Based Performance Evaluation of an SMS-Based Emergency Geolocation Notification System

    Directory of Open Access Journals (Sweden)

    Isibor Osebor

    2017-01-01

    Full Text Available In an emergency, a prompt response can save the lives of victims. This statement generates an imperative issue in emergency medical services (EMS. Designing a system that brings simplicity in locating emergency scenes is a step towards improving response time. This paper therefore implemented and evaluated the performance of an SMS-based emergency geolocation notification system with emphasis on its SMS delivery time and the system’s geolocation and dispatch time. Using the RAS metrics recommended by IEEE for evaluation, the designed system was found to be efficient and effective as its reliability stood within 62.7% to 70.0% while its availability stood at 99% with a downtime of 3.65 days/year.

  2. Evaluation of cognitive loads imposed by traditional paper-based and innovative computer-based instructional strategies.

    Science.gov (United States)

    Khalil, Mohammed K; Mansour, Mahmoud M; Wilhite, Dewey R

    2010-01-01

    Strategies of presenting instructional information affect the type of cognitive load imposed on the learner's working memory. Effective instruction reduces extraneous (ineffective) cognitive load and promotes germane (effective) cognitive load. Eighty first-year students from two veterinary schools completed a two-section questionnaire that evaluated their perspectives on the educational value of a computer-based instructional program. They compared the difference between cognitive loads imposed by paper-based and computer-based instructional strategies used to teach the anatomy of the canine skeleton. Section I included 17 closed-ended items, rated on a five-point Likert scale, that assessed the use of graphics, content, and the learning process. Section II included a nine-point mental effort rating scale to measure the level of difficulty of instruction; students were asked to indicate the amount of mental effort invested in the learning task using both paper-based and computer-based presentation formats. The closed-ended data were expressed as means and standard deviations. A paired t test with an alpha level of 0.05 was used to determine the overall mean difference between the two presentation formats. Students positively evaluated their experience with the computer-based instructional program with a mean score of 4.69 (SD=0.53) for use of graphics, 4.70 (SD=0.56) for instructional content, and 4.45 (SD=0.67) for the learning process. The mean difference of mental effort (1.50) between the two presentation formats was significant, t=8.26, p≤.0001, df=76, for two-tailed distribution. Consistent with cognitive load theory, innovative computer-based instructional strategies decrease extraneous cognitive load compared with traditional paper-based instructional strategies.

  3. Farmer evaluation of dried banana based products | Pekke | African ...

    African Journals Online (AJOL)

    A farmer participatory evaluation of dried banana based products was conducted in various districts of Uganda. Bananas were dried using a tunnel solar dryer developed by Post Harvest Handling and Storage project (PHHS) of Kawanda Post-harvest Programme and improved by the National Banana Research ...

  4. Evaluation of computer-based library services at Kenneth Dike ...

    African Journals Online (AJOL)

    This study evaluated computer-based library services/routines at Kenneth Dike Library, University of Ibadan. Four research questions were developed and answered. A survey research design was adopted; using questionnaire as the instrument for data collection. A total of 200 respondents randomly selected from 10 ...

  5. Evaluation of Web and PDA-based Quality Assurance on a Building Site

    DEFF Research Database (Denmark)

    Koch, Christian; Vogelius, Peter

    2006-01-01

    Quality assurance tends to dangerously balance between redundant externalized paperwork and real life problems in everyday processes of design and construction. This leads to too many failures and complaints from customers. This paper describes an evaluative study of the implementation and use...... of a new ICT system based on the use of Personalized Digital Assistants (PDA’s) on the construction site supporting in-process quality assurance. In the pilot project we followed bricklayers using the PDA’ while they where working at a line of bathrooms. The central idea of the PDA based system (developed...... by the small Danish company ETJEK) is to lift the standard quality procedures from the paper based platform to a real-time database with direct access. The evaluation shows that system in facts works, and the introduction on the workplace was smoother than could be expected. The perspective of the evaluation...

  6. Comprehensive Evaluation of Car-Body Light-Weighting Scheme Based on LCC Theory

    Directory of Open Access Journals (Sweden)

    Han Qing-lan

    2016-01-01

    Full Text Available In this paper, a comprehensive evaluation model of light-weighting scheme is established, which is based on three dimensions, including the life cycle costs of the resource consumed by the designed objects (LCC, willingness to pay for the environmental effect of resource consumption (WTP and performance (P. Firstly, cost of each stage is determined. Then, based on the resource classification, which is based on cost elements, determine the material list needed, and apply WTP weight coefficient to monetize life cycle environmental impact and obtain the life cycle comprehensive cost of designed scheme (TCC. In the next step Performance (P index is calculated to measure the value of the life cycle costs by applying AHP and SAW method, integrated (TCC and (P to achieve comprehensive evaluation of light-weighting scheme. Finally, the effectiveness of the evaluation model is verified by the example of car engine hood.

  7. Quantitative evaluation methods of skin condition based on texture feature parameters

    Directory of Open Access Journals (Sweden)

    Hui Pang

    2017-03-01

    Full Text Available In order to quantitatively evaluate the improvement of the skin condition after using skin care products and beauty, a quantitative evaluation method for skin surface state and texture is presented, which is convenient, fast and non-destructive. Human skin images were collected by image sensors. Firstly, the median filter of the 3 × 3 window is used and then the location of the hairy pixels on the skin is accurately detected according to the gray mean value and color information. The bilinear interpolation is used to modify the gray value of the hairy pixels in order to eliminate the negative effect of noise and tiny hairs on the texture. After the above pretreatment, the gray level co-occurrence matrix (GLCM is calculated. On the basis of this, the four characteristic parameters, including the second moment, contrast, entropy and correlation, and their mean value are calculated at 45 ° intervals. The quantitative evaluation model of skin texture based on GLCM is established, which can calculate the comprehensive parameters of skin condition. Experiments show that using this method evaluates the skin condition, both based on biochemical indicators of skin evaluation methods in line, but also fully consistent with the human visual experience. This method overcomes the shortcomings of the biochemical evaluation method of skin damage and long waiting time, also the subjectivity and fuzziness of the visual evaluation, which achieves the non-destructive, rapid and quantitative evaluation of skin condition. It can be used for health assessment or classification of the skin condition, also can quantitatively evaluate the subtle improvement of skin condition after using skin care products or stage beauty.

  8. Quantitative evaluation methods of skin condition based on texture feature parameters.

    Science.gov (United States)

    Pang, Hui; Chen, Tianhua; Wang, Xiaoyi; Chang, Zhineng; Shao, Siqi; Zhao, Jing

    2017-03-01

    In order to quantitatively evaluate the improvement of the skin condition after using skin care products and beauty, a quantitative evaluation method for skin surface state and texture is presented, which is convenient, fast and non-destructive. Human skin images were collected by image sensors. Firstly, the median filter of the 3 × 3 window is used and then the location of the hairy pixels on the skin is accurately detected according to the gray mean value and color information. The bilinear interpolation is used to modify the gray value of the hairy pixels in order to eliminate the negative effect of noise and tiny hairs on the texture. After the above pretreatment, the gray level co-occurrence matrix (GLCM) is calculated. On the basis of this, the four characteristic parameters, including the second moment, contrast, entropy and correlation, and their mean value are calculated at 45 ° intervals. The quantitative evaluation model of skin texture based on GLCM is established, which can calculate the comprehensive parameters of skin condition. Experiments show that using this method evaluates the skin condition, both based on biochemical indicators of skin evaluation methods in line, but also fully consistent with the human visual experience. This method overcomes the shortcomings of the biochemical evaluation method of skin damage and long waiting time, also the subjectivity and fuzziness of the visual evaluation, which achieves the non-destructive, rapid and quantitative evaluation of skin condition. It can be used for health assessment or classification of the skin condition, also can quantitatively evaluate the subtle improvement of skin condition after using skin care products or stage beauty.

  9. Research on Air Quality Evaluation based on Principal Component Analysis

    Science.gov (United States)

    Wang, Xing; Wang, Zilin; Guo, Min; Chen, Wei; Zhang, Huan

    2018-01-01

    Economic growth has led to environmental capacity decline and the deterioration of air quality. Air quality evaluation as a fundamental of environmental monitoring and air pollution control has become increasingly important. Based on the principal component analysis (PCA), this paper evaluates the air quality of a large city in Beijing-Tianjin-Hebei Area in recent 10 years and identifies influencing factors, in order to provide reference to air quality management and air pollution control.

  10. Non-Contact Laser Based Ultrasound Evaluation of Canned Foods

    Science.gov (United States)

    Shelton, David

    2005-03-01

    Laser-Based Ultrasound detection was used to measure the velocity of compression waves transmitted through canned foods. Condensed broth, canned pasta, and non-condensed soup were evaluated in these experiments. Homodyne adaptive optics resulted in measurements that were more accurate than the traditional heterodyne method, as well as yielding a 10 dB gain in signal to noise. A-Scans measured the velocity of ultrasound sent through the center of the can and were able to distinguish the quantity of food stuff in its path, as well as distinguish between meat and potato. B-Scans investigated the heterogeneity of the sample’s contents. The evaluation of canned foods was completely non-contact and would be suitable for continuous monitoring in production. These results were verified by conducting the same experiments with a contact piezo transducer. Although the contact method yields a higher signal to noise ratio than the non-contact method, Laser-Based Ultrasound was able to detect surface waves the contact transducer could not.

  11. Monte Carlo evaluation of derivative-based global sensitivity measures

    Energy Technology Data Exchange (ETDEWEB)

    Kucherenko, S. [Centre for Process Systems Engineering, Imperial College London, London SW7 2AZ (United Kingdom)], E-mail: s.kucherenko@ic.ac.uk; Rodriguez-Fernandez, M. [Process Engineering Group, Instituto de Investigaciones Marinas, Spanish Council for Scientific Research (C.S.I.C.), C/ Eduardo Cabello, 6, 36208 Vigo (Spain); Pantelides, C.; Shah, N. [Centre for Process Systems Engineering, Imperial College London, London SW7 2AZ (United Kingdom)

    2009-07-15

    A novel approach for evaluation of derivative-based global sensitivity measures (DGSM) is presented. It is compared with the Morris and the Sobol' sensitivity indices methods. It is shown that there is a link between DGSM and Sobol' sensitivity indices. DGSM are very easy to implement and evaluate numerically. The computational time required for numerical evaluation of DGSM is many orders of magnitude lower than that for estimation of the Sobol' sensitivity indices. It is also lower than that for the Morris method. Efficiencies of Monte Carlo (MC) and quasi-Monte Carlo (QMC) sampling methods for calculation of DGSM are compared. It is shown that the superiority of QMC over MC depends on the problem's effective dimension, which can also be estimated using DGSM.

  12. An Evaluation of the Webquest as a Computer-Based Learning Tool

    Science.gov (United States)

    Hassanien, Ahmed

    2006-01-01

    This paper explores the preparation and use of an internet activity for undergraduate learners in higher education (HE). It evaluates the effectiveness of using webquest as a computer-based learning (CBL) tool to support students to learn in HE. The evaluation undertaken offers insights into learner perceptions concerning the ease of use of the…

  13. Design and Evaluation of Chitosan-Based Novel pHSensitive Drug ...

    African Journals Online (AJOL)

    Design and Evaluation of Chitosan-Based Novel pHSensitive Drug Carrier for Sustained ... Scanning electron microscopy(SEM),Raman spectroscopy for particle size analysis. Swelling ratio, Effect of drug loading on encapsulation efficiency

  14. A usability evaluation of a SNOMED CT based compositional interface terminology for intensive care

    NARCIS (Netherlands)

    Bakhshi-Raiez, F.; de Keizer, N. F.; Cornet, R.; Dorrepaal, M.; Dongelmans, D.; Jaspers, M. W. M.

    2012-01-01

    Objective: To evaluate the usability of a large compositional interface terminology based on SNOMED CT and the terminology application for registration of the reasons for intensive care admission in a Patient Data Management System. Design: Observational study with user-based usability evaluations

  15. Evaluating Pillar Industry’s Transformation Capability: A Case Study of Two Chinese Steel-Based Cities

    Science.gov (United States)

    Li, Zhidong; Marinova, Dora; Guo, Xiumei; Gao, Yuan

    2015-01-01

    Many steel-based cities in China were established between the 1950s and 1960s. After more than half a century of development and boom, these cities are starting to decline and industrial transformation is urgently needed. This paper focuses on evaluating the transformation capability of resource-based cities building an evaluation model. Using Text Mining and the Document Explorer technique as a way of extracting text features, the 200 most frequently used words are derived from 100 publications related to steel- and other resource-based cities. The Expert Evaluation Method (EEM) and Analytic Hierarchy Process (AHP) techniques are then applied to select 53 indicators, determine their weights and establish an index system for evaluating the transformation capability of the pillar industry of China’s steel-based cities. Using real data and expert reviews, the improved Fuzzy Relation Matrix (FRM) method is applied to two case studies in China, namely Panzhihua and Daye, and the evaluation model is developed using Fuzzy Comprehensive Evaluation (FCE). The cities’ abilities to carry out industrial transformation are evaluated with concerns expressed for the case of Daye. The findings have policy implications for the potential and required industrial transformation in the two selected cities and other resource-based towns. PMID:26422266

  16. Impact on house staff evaluation scores when changing from a Dreyfus- to a Milestone-based evaluation model: one internal medicine residency program's findings

    Directory of Open Access Journals (Sweden)

    Karen A. Friedman

    2014-11-01

    Full Text Available Purpose: As graduate medical education (GME moves into the Next Accreditation System (NAS, programs must take a critical look at their current models of evaluation and assess how well they align with reporting outcomes. Our objective was to assess the impact on house staff evaluation scores when transitioning from a Dreyfus-based model of evaluation to a Milestone-based model of evaluation. Milestones are a key component of the NAS. Method: We analyzed all end of rotation evaluations of house staff completed by faculty for academic years 2010–2011 (pre-Dreyfus model and 2011–2012 (post-Milestone model in one large university-based internal medicine residency training program. Main measures included change in PGY-level average score; slope, range, and separation of average scores across all six Accreditation Council for Graduate Medical Education (ACGME competencies. Results: Transitioning from a Dreyfus-based model to a Milestone-based model resulted in a larger separation in the scores between our three post-graduate year classes, a steeper progression of scores in the PGY-1 class, a wider use of the 5-point scale on our global end of rotation evaluation form, and a downward shift in the PGY-1 scores and an upward shift in the PGY-3 scores. Conclusions: For faculty trained in both models of assessment, the Milestone-based model had greater discriminatory ability as evidenced by the larger separation in the scores for all the classes, in particular the PGY-1 class.

  17. Impact on house staff evaluation scores when changing from a Dreyfus- to a Milestone-based evaluation model: one internal medicine residency program's findings.

    Science.gov (United States)

    Friedman, Karen A; Balwan, Sandy; Cacace, Frank; Katona, Kyle; Sunday, Suzanne; Chaudhry, Saima

    2014-01-01

    As graduate medical education (GME) moves into the Next Accreditation System (NAS), programs must take a critical look at their current models of evaluation and assess how well they align with reporting outcomes. Our objective was to assess the impact on house staff evaluation scores when transitioning from a Dreyfus-based model of evaluation to a Milestone-based model of evaluation. Milestones are a key component of the NAS. We analyzed all end of rotation evaluations of house staff completed by faculty for academic years 2010-2011 (pre-Dreyfus model) and 2011-2012 (post-Milestone model) in one large university-based internal medicine residency training program. Main measures included change in PGY-level average score; slope, range, and separation of average scores across all six Accreditation Council for Graduate Medical Education (ACGME) competencies. Transitioning from a Dreyfus-based model to a Milestone-based model resulted in a larger separation in the scores between our three post-graduate year classes, a steeper progression of scores in the PGY-1 class, a wider use of the 5-point scale on our global end of rotation evaluation form, and a downward shift in the PGY-1 scores and an upward shift in the PGY-3 scores. For faculty trained in both models of assessment, the Milestone-based model had greater discriminatory ability as evidenced by the larger separation in the scores for all the classes, in particular the PGY-1 class.

  18. Intelligent Evaluation Method of Tank Bottom Corrosion Status Based on Improved BP Artificial Neural Network

    Science.gov (United States)

    Qiu, Feng; Dai, Guang; Zhang, Ying

    According to the acoustic emission information and the appearance inspection information of tank bottom online testing, the external factors associated with tank bottom corrosion status are confirmed. Applying artificial neural network intelligent evaluation method, three tank bottom corrosion status evaluation models based on appearance inspection information, acoustic emission information, and online testing information are established. Comparing with the result of acoustic emission online testing through the evaluation of test sample, the accuracy of the evaluation model based on online testing information is 94 %. The evaluation model can evaluate tank bottom corrosion accurately and realize acoustic emission online testing intelligent evaluation of tank bottom.

  19. Crop Evaluation System Optimization: Attribute Weights Determination Based on Rough Sets Theory

    Directory of Open Access Journals (Sweden)

    Ruihong Wang

    2017-01-01

    Full Text Available The present study is mainly a continuation of our previous study, which is about a crop evaluation system development that is based on grey relational analysis. In that system, the attribute weight determination affects the evaluation result directly. Attribute weight is usually ascertained by decision-makers experience knowledge. In this paper, we utilize rough sets theory to calculate attribute significance and then combine it with weight given by decision-maker. This method is a comprehensive consideration of subjective experience knowledge and objective situation; thus it can acquire much more ideal results. Finally, based on this method, we improve the system based on ASP.NET technology.

  20. Development and implementation of a competency-based clinical evaluation tool for midwifery education.

    Science.gov (United States)

    Woeber, Kate

    2018-03-22

    The learning goals and evaluation strategies of competency-based midwifery programs must be explicit and well-defined. In the US, didactic learning is evaluated through a standardized certification examination, but standardized clinical competence evaluation is lacking. The Midwifery Competency Assessment Tool (MCAT) has been adapted from the International Confederation of Midwives' (ICM) "Essential Competencies" and from the American College of Nurse-Midwives' (ACNM) "Core Competencies", with student self-evaluation based on Benner's Novice-to-Expert theory. The MCAT allows for the measurement and monitoring of competence development in all domains of full-scope practice over the course of the midwifery program. Strengths of the MCAT are that it provides clear learning goals and performance evaluations for students, ensures and communicates content mapping across a curriculum, and highlights strengths and gaps in clinical opportunities at individual clinical sites and for entire programs. Challenges of the MCAT lie in balancing the number of competency items to be measured with the tedium of form completion, in ensuring the accuracy of student self-evaluation, and in determining "adequate" competence achievement when particular clinical opportunities are limited. Use of the MCAT with competency-based clinical education may facilitate a more standardized approach to clinical evaluation, as well as a more strategic approach to clinical site development and use. Copyright © 2018 Elsevier Ltd. All rights reserved.

  1. CHARACTERIZATION AND EVALUATION OF TIME-DRIVEN ACTIVITY BASED COSTING BASED ON ABC’S DEVELOPMENT

    DEFF Research Database (Denmark)

    Israelsen, Poul; Kristensen, Thomas Borup

    2014-01-01

    The paper provides a description of the development of Activity Based Costing (ABC) in four variants. This is used to characterize and evaluated the changes made in Time-Driven ABC (TDABC). It is found that TDABC in some cases reaches back to cost calculations prior to ABC (e.g. homogenous...

  2. Study on fatigue life evaluation of structural component based on crack growth criterion

    International Nuclear Information System (INIS)

    Shibata, Katsuyuki

    1984-07-01

    As one of the practical application of fracture mechanics, fatigue life evaluation method based on crack growth criterion has been diffusing in various field of technology in order to determine the rational and reliable life of structural components. The fatigue life by this method is evaluated based on the fatigue crack growth analysis from defects, while many problems, such as the influence of residual stress on the crack growth behavior, the effect of overloading, and evaluation method for multiple surface cracks, are not sufficiently solved yet. In this paper, the above problems are treated, and based on some exprimental data some simple mehtods for fatigue life evaluation are proposed regarding the above problems. Verification of the proposed methods are shown in the paper by comparing with some experimental results, and the applicability of the proposed method is also examined by the fatigue test of pipes with cracks in the inner surface. (author)

  3. An Electronic Competency-Based Evaluation Tool for Assessing Humanitarian Competencies in a Simulated Exercise.

    Science.gov (United States)

    Evans, Andrea B; Hulme, Jennifer M; Nugus, Peter; Cranmer, Hilarie H; Coutu, Melanie; Johnson, Kirsten

    2017-06-01

    The evaluation tool was first derived from the formerly Consortium of British Humanitarian Agencies' (CBHA; United Kingdom), now "Start Network's," Core Humanitarian Competency Framework and formatted in an electronic data capture tool that allowed for offline evaluation. During a 3-day humanitarian simulation event, participants in teams of eight to 10 were evaluated individually at multiple injects by trained evaluators. Participants were assessed on five competencies and a global rating scale. Participants evaluated both themselves and their team members using the same tool at the end of the simulation exercise (SimEx). All participants (63) were evaluated. A total of 1,008 individual evaluations were completed. There were 90 (9.0%) missing evaluations. All 63 participants also evaluated themselves and each of their teammates using the same tool. Self-evaluation scores were significantly lower than peer-evaluations, which were significantly lower than evaluators' assessments. Participants with a medical degree, and those with humanitarian work experience of one month or more, scored significantly higher on all competencies assessed by evaluators compared to other participants. Participants with prior humanitarian experience scored higher on competencies regarding operating safely and working effectively as a team member. This study presents a novel electronic evaluation tool to assess individual performance in five of six globally recognized humanitarian competency domains in a 3-day humanitarian SimEx. The evaluation tool provides a standardized approach to the assessment of humanitarian competencies that cannot be evaluated through knowledge-based testing in a classroom setting. When combined with testing knowledge-based competencies, this presents an approach to a comprehensive competency-based assessment that provides an objective measurement of competency with respect to the competencies listed in the Framework. There is an opportunity to advance the use of

  4. A structure-based approach to evaluation product adaptability in adaptable design

    International Nuclear Information System (INIS)

    Cheng, Qiang; Liu, Zhifeng; Cai, Ligang; Zhang, Guojun; Gu, Peihua

    2011-01-01

    Adaptable design, as a new design paradigm, involves creating designs and products that can be easily changed to satisfy different requirements. In this paper, two types of product adaptability are proposed as essential adaptability and behavioral adaptability, and through measuring which respectively a model for product adaptability evaluation is developed. The essential adaptability evaluation proceeds with analyzing the independencies of function requirements and function modules firstly based on axiomatic design, and measuring the adaptability of interfaces secondly with three indices. The behavioral adaptability reflected by the performance of adaptable requirements after adaptation is measured based on Kano model. At last, the effectiveness of the proposed method is demonstrated by an illustrative example of the motherboard of a personal computer. The results show that the method can evaluate and reveal the adaptability of a product in essence, and is of directive significance to improving design and innovative design

  5. An LG-graph-based early evaluation of segmented images

    International Nuclear Information System (INIS)

    Tsitsoulis, Athanasios; Bourbakis, Nikolaos

    2012-01-01

    Image segmentation is one of the first important parts of image analysis and understanding. Evaluation of image segmentation, however, is a very difficult task, mainly because it requires human intervention and interpretation. In this work, we propose a blind reference evaluation scheme based on regional local–global (RLG) graphs, which aims at measuring the amount and distribution of detail in images produced by segmentation algorithms. The main idea derives from the field of image understanding, where image segmentation is often used as a tool for scene interpretation and object recognition. Evaluation here derives from summarization of the structural information content and not from the assessment of performance after comparisons with a golden standard. Results show measurements for segmented images acquired from three segmentation algorithms, applied on different types of images (human faces/bodies, natural environments and structures (buildings)). (paper)

  6. Damage evaluation by a guided wave-hidden Markov model based method

    Science.gov (United States)

    Mei, Hanfei; Yuan, Shenfang; Qiu, Lei; Zhang, Jinjin

    2016-02-01

    Guided wave based structural health monitoring has shown great potential in aerospace applications. However, one of the key challenges of practical engineering applications is the accurate interpretation of the guided wave signals under time-varying environmental and operational conditions. This paper presents a guided wave-hidden Markov model based method to improve the damage evaluation reliability of real aircraft structures under time-varying conditions. In the proposed approach, an HMM based unweighted moving average trend estimation method, which can capture the trend of damage propagation from the posterior probability obtained by HMM modeling is used to achieve a probabilistic evaluation of the structural damage. To validate the developed method, experiments are performed on a hole-edge crack specimen under fatigue loading condition and a real aircraft wing spar under changing structural boundary conditions. Experimental results show the advantage of the proposed method.

  7. Heuristic evaluation of paper-based Web pages: a simplified inspection usability methodology.

    Science.gov (United States)

    Allen, Mureen; Currie, Leanne M; Bakken, Suzanne; Patel, Vimla L; Cimino, James J

    2006-08-01

    Online medical information, when presented to clinicians, must be well-organized and intuitive to use, so that the clinicians can conduct their daily work efficiently and without error. It is essential to actively seek to produce good user interfaces that are acceptable to the user. This paper describes the methodology used to develop a simplified heuristic evaluation (HE) suitable for the evaluation of screen shots of Web pages, the development of an HE instrument used to conduct the evaluation, and the results of the evaluation of the aforementioned screen shots. In addition, this paper presents examples of the process of categorizing problems identified by the HE and the technological solutions identified to resolve these problems. Four usability experts reviewed 18 paper-based screen shots and made a total of 108 comments. Each expert completed the task in about an hour. We were able to implement solutions to approximately 70% of the violations. Our study found that a heuristic evaluation using paper-based screen shots of a user interface was expeditious, inexpensive, and straightforward to implement.

  8. [Inferential evaluation of intimacy based on observation of interpersonal communication].

    Science.gov (United States)

    Kimura, Masanori

    2015-06-01

    How do people inferentially evaluate others' levels of intimacy with friends? We examined the inferential evaluation of intimacy based on the observation of interpersonal communication. In Experiment 1, participants (N = 41) responded to questions after observing conversations between friends. Results indicated that participants inferentially evaluated not only goodness of communication, but also intimacy between friends, using an expressivity heuristic approach. In Experiment 2, we investigated how inferential evaluation of intimacy was affected by prior information about relationships and by individual differences in face-to-face interactional ability. Participants (N = 64) were divided into prior- and no-prior-information groups and all performed the same task as in Experiment 1. Additionally, their interactional ability was assessed. In the prior-information group, individual differences had no effect on inferential evaluation of intimacy. On the other hand, in the no-prior-information group, face-to-face interactional ability partially influenced evaluations of intimacy. Finally, we discuss the fact that to understand one's social environment, it is important to observe others' interpersonal communications.

  9. 75 FR 32484 - Array-Based Cytogenetic Tests: Questions on Performance Evaluation, Result Reporting and...

    Science.gov (United States)

    2010-06-08

    ...] Array-Based Cytogenetic Tests: Questions on Performance Evaluation, Result Reporting and Interpretation... public meeting: Array-Based Cytogenetic Tests: Questions on Performance Evaluation, Result Reporting and... cytogenetic tests. Date and Time: The meeting will be held on June 30, 2010, from 1:30 p.m. to 5 p.m. Location...

  10. Developing a Self-Report-Based Sequential Analysis Method for Educational Technology Systems: A Process-Based Usability Evaluation

    Science.gov (United States)

    Lin, Yi-Chun; Hsieh, Ya-Hui; Hou, Huei-Tse

    2015-01-01

    The development of a usability evaluation method for educational systems or applications, called the self-report-based sequential analysis, is described herein. The method aims to extend the current practice by proposing self-report-based sequential analysis as a new usability method, which integrates the advantages of self-report in survey…

  11. FEM-based evaluation of deformable image registration for radiation therapy

    International Nuclear Information System (INIS)

    Zhong Hualiang; Peters, Terry; Siebers, Jeffrey V

    2007-01-01

    This paper presents a new concept to automatically detect the neighborhood in an image where deformable registration is mis-performing. Specifically, the displacement vector field (DVF) from a deformable image registration is substituted into a finite-element-based elastic framework to calculate unbalanced energy in each element. The value of the derived energy indicates the quality of the DVF in its neighborhood. The new voxel-based evaluation approach is compared with three other validation criteria: landmark measurement, a finite element approach and visual comparison, for deformable registrations performed with the optical-flow-based 'demons' algorithm as well as thin-plate spline interpolation. This analysis was performed on three pairs of prostate CT images. The results of the analysis show that the four criteria give mutually comparable quantitative assessments on the six registration instances. As an objective concept, the unbalanced energy presents no requirement on boundary constraints in its calculation, different from traditional mechanical modeling. This method is automatic, and at voxel level suitable to evaluate deformable registration in a clinical setting

  12. Introducing Multisensor Satellite Radiance-Based Evaluation for Regional Earth System Modeling

    Science.gov (United States)

    Matsui, T.; Santanello, J.; Shi, J. J.; Tao, W.-K.; Wu, D.; Peters-Lidard, C.; Kemp, E.; Chin, M.; Starr, D.; Sekiguchi, M.; hide

    2014-01-01

    Earth System modeling has become more complex, and its evaluation using satellite data has also become more difficult due to model and data diversity. Therefore, the fundamental methodology of using satellite direct measurements with instrumental simulators should be addressed especially for modeling community members lacking a solid background of radiative transfer and scattering theory. This manuscript introduces principles of multisatellite, multisensor radiance-based evaluation methods for a fully coupled regional Earth System model: NASA-Unified Weather Research and Forecasting (NU-WRF) model. We use a NU-WRF case study simulation over West Africa as an example of evaluating aerosol-cloud-precipitation-land processes with various satellite observations. NU-WRF-simulated geophysical parameters are converted to the satellite-observable raw radiance and backscatter under nearly consistent physics assumptions via the multisensor satellite simulator, the Goddard Satellite Data Simulator Unit. We present varied examples of simple yet robust methods that characterize forecast errors and model physics biases through the spatial and statistical interpretation of various satellite raw signals: infrared brightness temperature (Tb) for surface skin temperature and cloud top temperature, microwave Tb for precipitation ice and surface flooding, and radar and lidar backscatter for aerosol-cloud profiling simultaneously. Because raw satellite signals integrate many sources of geophysical information, we demonstrate user-defined thresholds and a simple statistical process to facilitate evaluations, including the infrared-microwave-based cloud types and lidar/radar-based profile classifications.

  13. An Evaluation of a Language for Paper-based Form Sketching

    DEFF Research Database (Denmark)

    Farruglia, Phillip; Borg, Johnathan; Camilleri, K.P.

    2006-01-01

    form idea. The research disclosed in this paper is aimed at combining the benefits of paper-based freehand sketches with those of three-dimensional (3D) models. More specifically, this paper reports the on-going development of a prescribed sketching language (PSL) required to create a seamless link...... between paper-based form sketching and CAGM systems. Evaluation results revealed that whilst PSL is easy-to-learn, yet it requires improvements. Such a sketching language contributes a step towards simulating early form design solutions by the combined use of paper-based sketches and 3D models....

  14. Evaluation of in-situ thermal energy storage for lunar based solar dynamic systems

    Science.gov (United States)

    Crane, Roger A.

    1991-01-01

    A practical lunar based thermal energy storage system, based on locally available materials, could significantly reduce transportation requirements and associated costs of a continuous, solar derived power system. The concept reported here is based on a unique, in-situ approach to thermal energy storage. The proposed design is examined to assess the problems of start-up and the requirements for attainment of stable operation. The design remains, at this stage, partially conceptional in nature, but certain aspects of the design, bearing directly on feasibility, are examined in some detail. Specifically included is an engineering evaluation of the projected thermal performance of this system. Both steady state and start-up power requirements are evaluated and the associated thermal losses are evaluated as a basis for establishing potential system performance.

  15. Evaluation of a Learning Object Based Learning Environment in Different Dimensions

    Directory of Open Access Journals (Sweden)

    Ünal Çakıroğlu

    2009-11-01

    Full Text Available Learning Objects (LOs are web based learning resources presented by Learning Object Repositories (LOR. For recent years LOs have begun to take place on web and it is suggested that appropriate design of LOs can make positive impact on learning. In order to support learning, research studies recommends LOs should have been evaluated pedagogically and technologically, and the content design created by using LOs should have been designed through appropriate instructional models. Since the use of LOs have recently begun, an exact pedagogical model about efficient use of LOs has not been developed. In this study a LOR is designed in order to be used in mathematics education. The LOs in this LOR have been evaluated pedagogically and technologically by mathematics teachers and field experts. In order to evaluate the designed LO based environment, two different questionnaires have been used. These questionnaires are developed by using the related literature about web based learning environments evaluation criteria and also the items are discussed with the field experts for providing the validity. The reliability of the questionnaires is calculated cronbach alpha = 0.715 for the design properties evaluation survey and cronbach alpha =0.726 for pedagogic evaluation. Both of two questionnaires are five point Likert type. The first questionnaire has the items about “Learning Support of LOs, Competency of LOR, The importance of LOs in mathematics education, the usability of LOs by students”. “The activities on LOs are related to outcomes of subjects, there are activities for students have different learning styles. There are activities for wondering students.” are examples for items about learning support of LOs. “System helps for exploration of mathematical relations”, “I think teaching mathematics with this system will be enjoyable.” are example items for importance of LOs in mathematics education. In the competency of LOR title,

  16. Performance evaluation of PCA-based spike sorting algorithms.

    Science.gov (United States)

    Adamos, Dimitrios A; Kosmidis, Efstratios K; Theophilidis, George

    2008-09-01

    Deciphering the electrical activity of individual neurons from multi-unit noisy recordings is critical for understanding complex neural systems. A widely used spike sorting algorithm is being evaluated for single-electrode nerve trunk recordings. The algorithm is based on principal component analysis (PCA) for spike feature extraction. In the neuroscience literature it is generally assumed that the use of the first two or most commonly three principal components is sufficient. We estimate the optimum PCA-based feature space by evaluating the algorithm's performance on simulated series of action potentials. A number of modifications are made to the open source nev2lkit software to enable systematic investigation of the parameter space. We introduce a new metric to define clustering error considering over-clustering more favorable than under-clustering as proposed by experimentalists for our data. Both the program patch and the metric are available online. Correlated and white Gaussian noise processes are superimposed to account for biological and artificial jitter in the recordings. We report that the employment of more than three principal components is in general beneficial for all noise cases considered. Finally, we apply our results to experimental data and verify that the sorting process with four principal components is in agreement with a panel of electrophysiology experts.

  17. The Emergence of Contesting Motives for Student Feedback-Based Evaluation in Australian Higher Education

    Science.gov (United States)

    Darwin, Stephen

    2016-01-01

    Student feedback-based evaluation performs a significant social role in framing perceptions of the quality of teaching in contemporary Australian higher education. Yet its emergence is a relatively recent phenomenon, having only been in widespread application since the mid-1980s. The early manifestations of student feedback-based evaluation came…

  18. Evaluation of Water Resources Carrying Capacity in Shandong Province Based on Fuzzy Comprehensive Evaluation

    Directory of Open Access Journals (Sweden)

    Zhao Qiang

    2018-01-01

    Full Text Available Water resources carrying capacity is the maximum available water resources supporting by the social and economic development. Based on investigating and statisticing on the current situation of water resources in Shandong Province, this paper selects 13 factors including per capita water resources, water resources utilization, water supply modulus, rainfall, per capita GDP, population density, per capita water consumption, water consumption per million yuan, The water consumption of industrial output value, the agricultural output value of farmland, the irrigation rate of cultivated land, the water consumption rate of ecological environment and the forest coverage rate were used as the evaluation factors. Then,the fuzzy comprehensive evaluation model was used to analyze the water resources carrying capacity Force status evaluation. The results showed : The comprehensive evaluation results of water resources in Shandong Province were lower than 0.6 in 2001-2009 and higher than 0.6 in 2010-2015, which indicating that the water resources carrying capacity of Shandong Province has been improved.; In addition, most of the years a value of less than 0.6, individual years below 0.4, the interannual changes are relatively large, from that we can see the level of water resources is generally weak, the greater the interannual changes in Shandong Province.

  19. A online credit evaluation method based on AHP and SPA

    Science.gov (United States)

    Xu, Yingtao; Zhang, Ying

    2009-07-01

    Online credit evaluation is the foundation for the establishment of trust and for the management of risk between buyers and sellers in e-commerce. In this paper, a new credit evaluation method based on the analytic hierarchy process (AHP) and the set pair analysis (SPA) is presented to determine the credibility of the electronic commerce participants. It solves some of the drawbacks found in classical credit evaluation methods and broadens the scope of current approaches. Both qualitative and quantitative indicators are considered in the proposed method, then a overall credit score is achieved from the optimal perspective. In the end, a case analysis of China Garment Network is provided for illustrative purposes.

  20. Collaborative en-route and slot allocation algorithm based on fuzzy comprehensive evaluation

    Science.gov (United States)

    Yang, Shangwen; Guo, Baohua; Xiao, Xuefei; Gao, Haichao

    2018-01-01

    To allocate the en-routes and slots to the flights with collaborative decision making, a collaborative en-route and slot allocation algorithm based on fuzzy comprehensive evaluation was proposed. Evaluation indexes include flight delay costs, delay time and the number of turning points. Analytic hierarchy process is applied to determining index weights. Remark set for current two flights not yet obtained the en-route and slot in flight schedule is established. Then, fuzzy comprehensive evaluation is performed, and the en-route and slot for the current two flights are determined. Continue selecting the flight not yet obtained an en-route and a slot in flight schedule. Perform fuzzy comprehensive evaluation until all flights have obtained the en-routes and slots. MatlabR2007b was applied to numerical test based on the simulated data of a civil en-route. Test results show that, compared with the traditional strategy of first come first service, the algorithm gains better effect. The effectiveness of the algorithm was verified.

  1. MCDM based evaluation and ranking of commercial off-the-shelf using fuzzy based matrix method

    Directory of Open Access Journals (Sweden)

    Rakesh Garg

    2017-04-01

    Full Text Available In today’s scenario, software has become an essential component in all kinds of systems. The size and the complexity of the software increases with a corresponding increase in its functionality, hence leads to the development of the modular software systems. Software developers emphasize on the concept of component based software engineering (CBSE for the development of modular software systems. The CBSE concept consists of dividing the software into a number of modules; selecting Commercial Off-the-Shelf (COTS for each module; and finally integrating the modules to develop the final software system. The selection of COTS for any module plays a vital role in software development. To address the problem of selection of COTS, a framework for ranking and selection of various COTS components for any software system based on expert opinion elicitation and fuzzy-based matrix methodology is proposed in this research paper. The selection problem is modeled as a multi-criteria decision making (MCDM problem. The evaluation criteria are identified through extensive literature study and the COTS components are ranked based on these identified and selected evaluation criteria using the proposed methods according to the value of a permanent function of their criteria matrices. The methodology is explained through an example and is validated by comparing with an existing method.

  2. Using evaluation to adapt health information outreach to the complex environments of community-based organizations.

    Science.gov (United States)

    Olney, Cynthia A

    2005-10-01

    After arguing that most community-based organizations (CBOs) function as complex adaptive systems, this white paper describes the evaluation goals, questions, indicators, and methods most important at different stages of community-based health information outreach. This paper presents the basic characteristics of complex adaptive systems and argues that the typical CBO can be considered this type of system. It then presents evaluation as a tool for helping outreach teams adapt their outreach efforts to the CBO environment and thus maximize success. Finally, it describes the goals, questions, indicators, and methods most important or helpful at each stage of evaluation (community assessment, needs assessment and planning, process evaluation, and outcomes assessment). Literature from complex adaptive systems as applied to health care, business, and evaluation settings is presented. Evaluation models and applications, particularly those based on participatory approaches, are presented as methods for maximizing the effectiveness of evaluation in dynamic CBO environments. If one accepts that CBOs function as complex adaptive systems-characterized by dynamic relationships among many agents, influences, and forces-then effective evaluation at the stages of community assessment, needs assessment and planning, process evaluation, and outcomes assessment is critical to outreach success.

  3. A smart sensor-based vision system: implementation and evaluation

    International Nuclear Information System (INIS)

    Elouardi, A; Bouaziz, S; Dupret, A; Lacassagne, L; Klein, J O; Reynaud, R

    2006-01-01

    One of the methods of solving the computational complexity of image-processing is to perform some low-level computations on the sensor focal plane. This paper presents a vision system based on a smart sensor. PARIS1 (Programmable Analog Retina-like Image Sensor1) is the first prototype used to evaluate the architecture of an on-chip vision system based on such a sensor coupled with a microcontroller. The smart sensor integrates a set of analog and digital computing units. This architecture paves the way for a more compact vision system and increases the performances reducing the data flow exchanges with a microprocessor in control. A system has been implemented as a proof-of-concept and has enabled us to evaluate the performance requirements for a possible integration of a microcontroller on the same chip. The used approach is compared with two architectures implementing CMOS active pixel sensors (APS) and interfaced to the same microcontroller. The comparison is related to image processing computation time, processing reliability, programmability, precision, bandwidth and subsequent stages of computations

  4. A smart sensor-based vision system: implementation and evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Elouardi, A; Bouaziz, S; Dupret, A; Lacassagne, L; Klein, J O; Reynaud, R [Institute of Fundamental Electronics, Bat. 220, Paris XI University, 91405 Orsay (France)

    2006-04-21

    One of the methods of solving the computational complexity of image-processing is to perform some low-level computations on the sensor focal plane. This paper presents a vision system based on a smart sensor. PARIS1 (Programmable Analog Retina-like Image Sensor1) is the first prototype used to evaluate the architecture of an on-chip vision system based on such a sensor coupled with a microcontroller. The smart sensor integrates a set of analog and digital computing units. This architecture paves the way for a more compact vision system and increases the performances reducing the data flow exchanges with a microprocessor in control. A system has been implemented as a proof-of-concept and has enabled us to evaluate the performance requirements for a possible integration of a microcontroller on the same chip. The used approach is compared with two architectures implementing CMOS active pixel sensors (APS) and interfaced to the same microcontroller. The comparison is related to image processing computation time, processing reliability, programmability, precision, bandwidth and subsequent stages of computations.

  5. Seismic performance evaluation of an MR elastomer-based smart base isolation system using real-time hybrid simulation

    International Nuclear Information System (INIS)

    Eem, S H; Jung, H J; Koo, J H

    2013-01-01

    Recently, magneto-rheological (MR) elastomer-based base isolation systems have been actively studied as alternative smart base isolation systems because MR elastomers are capable of adjusting their modulus or stiffness depending on the magnitude of the applied magnetic field. By taking advantage of the MR elastomers’ stiffness-tuning ability, MR elastomer-based smart base isolation systems strive to alleviate limitations of existing smart base isolation systems as well as passive-type base isolators. Until now, research on MR elastomer-based base isolation systems primarily focused on characterization, design, and numerical evaluations of MR elastomer-based isolators, as well as experimental tests with simple structure models. However, their applicability to large civil structures has not been properly studied yet because it is quite challenging to numerically emulate the complex behavior of MR elastomer-based isolators and to conduct experiments with large-size structures. To address these difficulties, this study employs the real-time hybrid simulation technique, which combines physical testing and computational modeling. The primary goal of the current hybrid simulation study is to evaluate seismic performances of an MR elastomer-based smart base isolation system, particularly its adaptability to distinctly different seismic excitations. In the hybrid simulation, a single-story building structure (non-physical, computational model) is coupled with a physical testing setup for a smart base isolation system with associated components (such as laminated MR elastomers and electromagnets) installed on a shaking table. A series of hybrid simulations is carried out under two seismic excitations having different dominant frequencies. The results show that the proposed smart base isolation system outperforms the passive base isolation system in reducing the responses of the structure for the excitations considered in this study. (paper)

  6. Multi-master profibus dp modelling and worst case analysis-based evaluation

    OpenAIRE

    Salvatore Monforte; Eduardo Tovar; Francisco Vasques; Salvatore Cavalieri

    2002-01-01

    This paper provides an analysis of the real-time behaviour of the multi-master Profibus DP network. The analysis is based on the evaluation of the worst-case message response time and the results obtained are compared with those present in literature, pointing out its capability to perform a more accurate evaluation of the performance of the Profibus network. Copyright © 2002 IFAC.

  7. Performance Evaluation of Bidding-Based Multi-Agent Scheduling Algorithms for Manufacturing Systems

    Directory of Open Access Journals (Sweden)

    Antonio Gordillo

    2014-10-01

    Full Text Available Artificial Intelligence techniques have being applied to many problems in manufacturing systems in recent years. In the specific field of manufacturing scheduling many studies have been published trying to cope with the complexity of the manufacturing environment. One of the most utilized approaches is (multi agent-based scheduling. Nevertheless, despite the large list of studies reported in this field, there is no resource or scientific study on the performance measure of this type of approach under very common and critical execution situations. This paper focuses on multi-agent systems (MAS based algorithms for task allocation, particularly in manufacturing applications. The goal is to provide a mechanism to measure the performance of agent-based scheduling approaches for manufacturing systems under key critical situations such as: dynamic environment, rescheduling, and priority change. With this mechanism it will be possible to simulate critical situations and to stress the system in order to measure the performance of a given agent-based scheduling method. The proposed mechanism is a pioneering approach for performance evaluation of bidding-based MAS approaches for manufacturing scheduling. The proposed method and evaluation methodology can be used to run tests in different manufacturing floors since it is independent of the workshop configuration. Moreover, the evaluation results presented in this paper show the key factors and scenarios that most affect the market-like MAS approaches for manufacturing scheduling.

  8. Video-Based Self-Observation as a Component of Developmental Teacher Evaluation

    Directory of Open Access Journals (Sweden)

    Leonardo A. Mercado

    2014-09-01

    Full Text Available In this paper, we explore the benefits to teacher evaluation when video-based self-observation is done by teachers as a vehicle for individual, reflective practice. We explore how it was applied systematically at the Instituto Cultural Peruano Norteamericano (ICPNA bi-national center in Lima, Peru among hundreds of English as a foreign language (EFL teachers in two institution-wide initiatives that have relied on self-observation through video professional development. In these cases, we provide a descriptive framework for each initiative as well as information on what was ultimately achieved by teachers, supervisors and the institution as a whole. We conclude with recommendations for implementing video-based self-evaluation.

  9. Fluorescence-Based Bioassays for the Detection and Evaluation of Food Materials

    OpenAIRE

    Nishi, Kentaro; Isobe, Shin-Ichiro; Zhu, Yun; Kiyama, Ryoiti

    2015-01-01

    We summarize here the recent progress in fluorescence-based bioassays for the detection and evaluation of food materials by focusing on fluorescent dyes used in bioassays and applications of these assays for food safety, quality and efficacy. Fluorescent dyes have been used in various bioassays, such as biosensing, cell assay, energy transfer-based assay, probing, protein/immunological assay and microarray/biochip assay. Among the arrays used in microarray/biochip assay, fluorescence-based mi...

  10. Evaluation of Teaching Performance: Considerations from the Competency-Based Approach

    Directory of Open Access Journals (Sweden)

    Mario Rueda Beltrán

    2009-11-01

    Full Text Available The article gives an overview of the main arguments and characteristics attributed to the Competency-based Approach in education, so as to analyze the various definitions available and some of the proposals on the subject of teaching skills. Approaches and strategies are suggested for developing teacher-evaluation programs in the context of a generalized environment in the educational sector which is adopting the model of competencies for school reform, curriculum redesign, modifications in teaching strategies, and manners and functions of evaluation.

  11. A national evaluation of community-based mental health strategies in Finland.

    Science.gov (United States)

    Vähäniemi, Anu; Warwick-Smith, Katja; Hätönen, Heli; Välimäki, Maritta

    2018-02-01

    High-quality mental health care requires written strategies to set a vision for the future, yet, there is limited systematic information available on the monitoring and evaluation of such strategies. The aim of this nationwide study is to evaluate local mental health strategies in community-based mental health services provided by municipalities. Mental health strategy documents were gathered through an online search and an e-mail survey of the local authorities of all Finnish mainland municipalities (n = 320). Out of 320 municipalities, documents for 129 municipalities (63 documents) were included in the study. The documents obtained (n = 63) were evaluated against the World Health Organization checklist for mental health strategies and policies. Evaluation of the process, operations and content of the documents, against 31 indicators in the checklist. Out of 320 Finnish municipalities, 40% (n = 129) had a mental health strategy document available and 33% (n = 104) had a document that was either in preparation or being updated. In these documents, priorities, targets and activities were clearly described. Nearly all (99%) of the documents suggested a commitment to preventative work, and 89% mentioned a dedication to developing community-based care. The key shortfalls identified were the lack of consideration of human rights (0%), the limited consideration of research (5%) and the lack of financial planning (28%) to successfully execute the plans. Of the documents obtained, 60% covered both mental health and substance abuse issues. This study contributes to the limited evidence base on health care strategy evaluations. Further research is needed to understand the potential impact of policy analysis. © The Author(s) 2017. Published by Oxford University Press in association with the International Society for Quality in Health Care. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com

  12. Evaluating Program Effectiveness or, If the Program is Competency-Based, How Come the Evaluation Is Costing So Much?

    Science.gov (United States)

    Scriven, Michael

    The concern with competency-based education is not whether it is any different from the more traditional approaches but whether it is worth the considerable effort it involves. There are several aspects of a competency-based program to be considered in its evaluation. The first is whether or not there is a justifiable need for the specified…

  13. Performance evaluation of nursing students following competency-based education.

    Science.gov (United States)

    Fan, Jun-Yu; Wang, Yu Hsin; Chao, Li Fen; Jane, Sui-Whi; Hsu, Li-Ling

    2015-01-01

    Competency-based education is known to improve the match between educational performance and employment opportunities. This study examined the effects of competency-based education on the learning outcomes of undergraduate nursing students. The study used a quasi-experimental design. A convenience sample of 312 second-year undergraduate nursing students from northern and southern Taiwan participated in the study. The experimental group (n=163) received competency-based education and the control group received traditional instruction (n=149) in a medical-surgical nursing course. Outcome measures included students' scores on the Objective Structured Clinical Examination, Self-Evaluated Core Competencies Scale, Metacognitive Inventory for Nursing Students questionnaire, and academic performance. Students who received competency-based education had significantly higher academic performance in the medical-surgical nursing course and practicum than did the control group. Required core competencies and metacognitive abilities improved significantly in the competency-based education group as compared to the control group after adjusting for covariates. Competency-based education is worth implementing and may close the gap between education and the ever-changing work environment. Copyright © 2014 Elsevier Ltd. All rights reserved.

  14. Model-based efficiency evaluation of combine harvester traction drives

    Directory of Open Access Journals (Sweden)

    Steffen Häberle

    2015-08-01

    Full Text Available As part of the research the drive train of the combine harvesters is investigated in detail. The focus on load and power distribution, energy consumption and usage distribution are explicitly explored on two test machines. Based on the lessons learned during field operations, model-based studies of energy saving potential in the traction train of combine harvesters can now be quantified. Beyond that the virtual machine trial provides an opportunity to compare innovative drivetrain architectures and control solutions under reproducible conditions. As a result, an evaluation method is presented and generically used to draw comparisons under local representative operating conditions.

  15. Exergoeconomic evaluation of a KRW-based IGCC power plant

    International Nuclear Information System (INIS)

    Tsatsavonis, G.; Lin, L.; TawFik, T.; Gallaspy, D.T.

    1991-01-01

    This paper reports on a study supported by the US Department of Energy, in which several design configurations of Kellogg-Rust-Westinghouse (KRW)-based Integrated Gasification-Combined-Cycle (IGCC) power plants were developed. One of these configurations was analyzed from the exergoeconomic (thermoeconomic) viewpoint. The detailed exergoeconomic evaluation identified several changes for improving the cost effectiveness of this IGCC design configuration. Based on the cost information supplied by the M.W. Kellogg Company, an attempt was made to calculate the economically optimal exergetic efficiency for some of the most important plant components. This information is currently used in plant optimization studies

  16. Ergonomic evaluation model of operational room based on team performance

    Directory of Open Access Journals (Sweden)

    YANG Zhiyi

    2017-05-01

    Full Text Available A theoretical calculation model based on the ergonomic evaluation of team performance was proposed in order to carry out the ergonomic evaluation of the layout design schemes of the action station in a multitasking operational room. This model was constructed in order to calculate and compare the theoretical value of team performance in multiple layout schemes by considering such substantial influential factors as frequency of communication, distance, angle, importance, human cognitive characteristics and so on. An experiment was finally conducted to verify the proposed model under the criteria of completion time and accuracy rating. As illustrated by the experiment results,the proposed approach is conductive to the prediction and ergonomic evaluation of the layout design schemes of the action station during early design stages,and provides a new theoretical method for the ergonomic evaluation,selection and optimization design of layout design schemes.

  17. Toward a Web based Environment for Evaluation and Design of Pedagogical Hypermedia

    Directory of Open Access Journals (Sweden)

    Ecaterina Pacurar-Giacomini

    2004-07-01

    Full Text Available We are working on a method, called CEPIAH. We propose a web based system used to help teachers to design multimedia documents and to evaluate their prototypes. Our current research objectives are to create a methodology to sustain the educational hypermedia design and evaluation . A module is used to evaluate multimedia software applied in educational context. We structured a knowledge base composed from a list of evaluation criteria, grouped in six themes: general feeling, technical quality, usability, scenario, multimedia documents, and didactical aspects. We insisted on multimedia particular aspects: we thoroughly studied the specificity of multimedia documents (investigating various fields such as photography, typography, picture semantics, cinema…. We also evaluated the way multimedia elements are gathered to prepare the reading acts. We finally determined specific criteria for pedagogical aspects, associated to the previous approaches. A global questionnaire joins all these modules. In this paper, we present the first two modules, EMPI and SP/UL/FC ( a method for designing pedagogical hypermedia , and an application of distant teaching (and distant learning, commenting the first results of this experiment. We conclude by a short presentation of the third module, on which we are still working.

  18. Unsupervised Performance Evaluation Strategy for Bridge Superstructure Based on Fuzzy Clustering and Field Data

    Directory of Open Access Journals (Sweden)

    Yubo Jiao

    2013-01-01

    Full Text Available Performance evaluation of a bridge is critical for determining the optimal maintenance strategy. An unsupervised bridge superstructure state assessment method is proposed in this paper based on fuzzy clustering and bridge field measured data. Firstly, the evaluation index system of bridge is constructed. Secondly, a certain number of bridge health monitoring data are selected as clustering samples to obtain the fuzzy similarity matrix and fuzzy equivalent matrix. Finally, different thresholds are selected to form dynamic clustering maps and determine the best classification based on statistic analysis. The clustering result is regarded as a sample base, and the bridge state can be evaluated by calculating the fuzzy nearness between the unknown bridge state data and the sample base. Nanping Bridge in Jilin Province is selected as the engineering project to verify the effectiveness of the proposed method.

  19. Evaluation of Criteria-Based Clinical Audit in Improving Quality of ...

    African Journals Online (AJOL)

    Erah

    ABSTRACT. Study evaluated criteria–based clinical audit in measuring and improving quality of obstetric care for five life-threatening obstetric complications: obstetric haemorrhage, eclampsia, genital tract infections, obstructed labor and uterine rupture. Clinical management of 65 patients was audited using a 'before.

  20. Systematic review of model-based cervical screening evaluations.

    Science.gov (United States)

    Mendes, Diana; Bains, Iren; Vanni, Tazio; Jit, Mark

    2015-05-01

    Optimising population-based cervical screening policies is becoming more complex due to the expanding range of screening technologies available and the interplay with vaccine-induced changes in epidemiology. Mathematical models are increasingly being applied to assess the impact of cervical cancer screening strategies. We systematically reviewed MEDLINE®, Embase, Web of Science®, EconLit, Health Economic Evaluation Database, and The Cochrane Library databases in order to identify the mathematical models of human papillomavirus (HPV) infection and cervical cancer progression used to assess the effectiveness and/or cost-effectiveness of cervical cancer screening strategies. Key model features and conclusions relevant to decision-making were extracted. We found 153 articles meeting our eligibility criteria published up to May 2013. Most studies (72/153) evaluated the introduction of a new screening technology, with particular focus on the comparison of HPV DNA testing and cytology (n = 58). Twenty-eight in forty of these analyses supported HPV DNA primary screening implementation. A few studies analysed more recent technologies - rapid HPV DNA testing (n = 3), HPV DNA self-sampling (n = 4), and genotyping (n = 1) - and were also supportive of their introduction. However, no study was found on emerging molecular markers and their potential utility in future screening programmes. Most evaluations (113/153) were based on models simulating aggregate groups of women at risk of cervical cancer over time without accounting for HPV infection transmission. Calibration to country-specific outcome data is becoming more common, but has not yet become standard practice. Models of cervical screening are increasingly used, and allow extrapolation of trial data to project the population-level health and economic impact of different screening policy. However, post-vaccination analyses have rarely incorporated transmission dynamics. Model calibration to country

  1. Gold-standard evaluation of a folksonomy-based ontology learning model

    Science.gov (United States)

    Djuana, E.

    2018-03-01

    Folksonomy, as one result of collaborative tagging process, has been acknowledged for its potential in improving categorization and searching of web resources. However, folksonomy contains ambiguities such as synonymy and polysemy as well as different abstractions or generality problem. To maximize its potential, some methods for associating tags of folksonomy with semantics and structural relationships have been proposed such as using ontology learning method. This paper evaluates our previous work in ontology learning according to gold-standard evaluation approach in comparison to a notable state-of-the-art work and several baselines. The results show that our method is comparable to the state-of the art work which further validate our approach as has been previously validated using task-based evaluation approach.

  2. Task-oriented structural design of manipulators based on operability evaluation

    International Nuclear Information System (INIS)

    Kotosaka, Shin-ya; Asama, Hajime; Takata, Shozo; Hiraoka, Hiroyuki; Kohda, Takehisa; Matsumoto, Akihiro; Endo, Isao.

    1995-01-01

    In this paper, a new method for designing the structure of manipulators based on evaluation of their adaptability to tasks is proposed. In the method, task directions are classified into three kinds of direction; operational direction, constrained direction and free direction. On each direction, condition of constraints by task environment is represented. The tasks are represented by a set of direction and condition of constraints. A new criterion, operability, is defined to quantify adaptability of manipulator to tasks, taking account of mobility in operational directions and immobility in constrained directions. The mobility and immobility is calculated based on the Jacobian matrix of manipulator. The operability evaluation method is implemented, and applied to structural design of manipulators, in which link parameters are optimized by the genetic algorithm. This system can derive suitable structure of manipulator to various tasks. The effectiveness of the system is shown concerning examples of welding tasks. (author)

  3. An inverse problem strategy based on forward model evaluations: Gradient-based optimization without adjoint solves

    Energy Technology Data Exchange (ETDEWEB)

    Aguilo Valentin, Miguel Alejandro [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2016-07-01

    This study presents a new nonlinear programming formulation for the solution of inverse problems. First, a general inverse problem formulation based on the compliance error functional is presented. The proposed error functional enables the computation of the Lagrange multipliers, and thus the first order derivative information, at the expense of just one model evaluation. Therefore, the calculation of the Lagrange multipliers does not require the solution of the computationally intensive adjoint problem. This leads to significant speedups for large-scale, gradient-based inverse problems.

  4. Mindfulness Based Stress Reduction for Academic Evaluation Anxiety: A Naturalistic Longitudinal Study

    Science.gov (United States)

    Dundas, Ingrid; Thorsheim, Torbjørn; Hjeltnes, Aslak; Binder, Per Einar

    2016-01-01

    Mindfulness based stress reduction (MBSR) for academic evaluation anxiety and self-confidence in 70 help-seeking bachelor's and master's students was examined. A repeated measures analysis of covariance on the 46 students who completed pretreatment and posttreatment measures (median age = 24 years, 83% women) showed that evaluation anxiety and…

  5. An information theory based approach for quantitative evaluation of man-machine interface complexity

    International Nuclear Information System (INIS)

    Kang, Hyun Gook

    1999-02-01

    In complex and high-risk work conditions, especially such as in nuclear power plants, human understanding of the plant is highly cognitive and thus largely dependent on the effectiveness of the man-machine interface system. In order to provide more effective and reliable operating conditions for future nuclear power plants, developing more credible and easy to use evaluation methods will afford great help in designing interface systems in a more efficient manner. In this study, in order to analyze the human-machine interactions, I propose the Human-processor Communication(HPC) model which is based on the information flow concept. It identifies the information flow around a human-processor. Information flow has two aspects: appearance and content. Based on the HPC model, I propose two kinds of measures for evaluating a user interface from the viewpoint of these two aspects of information flow. They measure the communicative complexity of each aspect. In this study, for the evaluation of the aspect of appearance, I propose three complexity measures: Operation Complexity, Transition Complexity, and Screen Complexity. Each one of these measures has its own physical meaning. Two experiments carried out in this work support the utility of these measures. The result of the quiz game experiment shows that as the complexity of task context increases, the usage of the interface system becomes more complex. The experimental results of the three example systems(digital view, LDP style view and hierarchy view) show the utility of the proposed complexity measures. In this study, for the evaluation of the aspect of content, I propose the degree of informational coincidence, R (K, P) as a measure for the usefulness of an alarm-processing system. It is designed to perform user-oriented evaluation based on the informational entropy concept. It will be especially useful inearly design phase because designers can estimate the usefulness of an alarm system by short calculations instead

  6. An information theory based approach for quantitative evaluation of man-machine interface complexity

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Hyun Gook

    1999-02-15

    In complex and high-risk work conditions, especially such as in nuclear power plants, human understanding of the plant is highly cognitive and thus largely dependent on the effectiveness of the man-machine interface system. In order to provide more effective and reliable operating conditions for future nuclear power plants, developing more credible and easy to use evaluation methods will afford great help in designing interface systems in a more efficient manner. In this study, in order to analyze the human-machine interactions, I propose the Human-processor Communication(HPC) model which is based on the information flow concept. It identifies the information flow around a human-processor. Information flow has two aspects: appearance and content. Based on the HPC model, I propose two kinds of measures for evaluating a user interface from the viewpoint of these two aspects of information flow. They measure the communicative complexity of each aspect. In this study, for the evaluation of the aspect of appearance, I propose three complexity measures: Operation Complexity, Transition Complexity, and Screen Complexity. Each one of these measures has its own physical meaning. Two experiments carried out in this work support the utility of these measures. The result of the quiz game experiment shows that as the complexity of task context increases, the usage of the interface system becomes more complex. The experimental results of the three example systems(digital view, LDP style view and hierarchy view) show the utility of the proposed complexity measures. In this study, for the evaluation of the aspect of content, I propose the degree of informational coincidence, R (K, P) as a measure for the usefulness of an alarm-processing system. It is designed to perform user-oriented evaluation based on the informational entropy concept. It will be especially useful inearly design phase because designers can estimate the usefulness of an alarm system by short calculations instead

  7. Quantitative evaluation of sperm in men, based on an interval scale

    Directory of Open Access Journals (Sweden)

    V. V. Danilov

    2014-11-01

    Full Text Available Modern methods of estimation spermogram are quite difficult and highly subjective. Were analyzed spermogram 215 men aged 20 to 46 years (mean age 29,7 ± 2,4 years. The analysis spermogram were selected 5 out of 21 key indicators of ejaculate that affect fertility: the total number, motility, viability, morphology of sperm, ejaculate volume. Based on these data the interval scale, which allows to quantify the sperm. Obtained as a result of an integral index is a reflection of pathological semen analysis based on deviations from the “ideal norm”, that allows to evaluate different sperm, and to evaluate the effectiveness of treatment, as with the use of conservative methods, and various options for surgical intervention.

  8. Evaluation of polymer based third order nonlinear integrated optics devices

    NARCIS (Netherlands)

    Driessen, A.; Hoekstra, Hugo; Blom, F.C.; Horst, F.; Horst, F.; Krijnen, Gijsbertus J.M.; van Schoot, J.B.P.; van Schoot, J.B.P.; Lambeck, Paul; Popma, T.J.A.; Diemeer, Mart

    Nonlinear polymers are promising materials for high speed active integrated optics devices. In this paper we evaluate the perspectives polymer based nonlinear optical devices can offer. Special attention is directed to the materials aspects. In our experimental work we applied mainly Akzo Nobel DANS

  9. Evaluating the Instructional Architecture of Web-Based Learning Tools (WBLTs): Direct Instruction vs. Constructivism Revisited

    Science.gov (United States)

    Kay, Robin

    2013-01-01

    Web-based learning tools (WBLTs), also known as learning objects, have been evaluated with a wide range of metrics, but rarely with respect to pedagogical design. The current study evaluated the impact of instructional architecture (direct instruction vs. constructive-based) on middle (n = 333)

  10. An Object-Based Approach to Evaluation of Climate Variability Projections and Predictions

    Science.gov (United States)

    Ammann, C. M.; Brown, B.; Kalb, C. P.; Bullock, R.

    2017-12-01

    Evaluations of the performance of earth system model predictions and projections are of critical importance to enhance usefulness of these products. Such evaluations need to address specific concerns depending on the system and decisions of interest; hence, evaluation tools must be tailored to inform about specific issues. Traditional approaches that summarize grid-based comparisons of analyses and models, or between current and future climate, often do not reveal important information about the models' performance (e.g., spatial or temporal displacements; the reason behind a poor score) and are unable to accommodate these specific information needs. For example, summary statistics such as the correlation coefficient or the mean-squared error provide minimal information to developers, users, and decision makers regarding what is "right" and "wrong" with a model. New spatial and temporal-spatial object-based tools from the field of weather forecast verification (where comparisons typically focus on much finer temporal and spatial scales) have been adapted to more completely answer some of the important earth system model evaluation questions. In particular, the Method for Object-based Diagnostic Evaluation (MODE) tool and its temporal (three-dimensional) extension (MODE-TD) have been adapted for these evaluations. More specifically, these tools can be used to address spatial and temporal displacements in projections of El Nino-related precipitation and/or temperature anomalies, ITCZ-associated precipitation areas, atmospheric rivers, seasonal sea-ice extent, and other features of interest. Examples of several applications of these tools in a climate context will be presented, using output of the CESM large ensemble. In general, these tools provide diagnostic information about model performance - accounting for spatial, temporal, and intensity differences - that cannot be achieved using traditional (scalar) model comparison approaches. Thus, they can provide more

  11. Evaluation of thorium based nuclear fuel. Extended summary

    International Nuclear Information System (INIS)

    Franken, W.M.P.; Bultman, J.H.; Konings, R.J.M.; Wichers, V.A.

    1995-04-01

    Application of thorium based nuclear fuels has been evaluated with emphasis on possible reduction of the actinide waste. As a result three ECN-reports are published, discussing in detail: - The reactor physics aspects, by comparing the operation characteristics of the cores of Pressurized Water Reactors and Heavy Water Reactors with different fuel types, including equilibrium thorium/uranium free, once-through uranium fuel and equilibrium uranium/plutonium fuel, - the chemical aspects of thorium based fuel cycles with emphasis on fuel (re)fabrication and fuel reprocessing, - the possible reduction in actinide waste as analysed for Heavy Water Reactors with various types of thorium based fuels in once-through operation and with reprocessing. These results are summarized in this report together with a short discussion on non-proliferation and uranium resource utilization. It has been concluded that a substantial reduction of actinide radiotoxicity of the disposed waste may be achieved by using thorium based fuels, if very efficient partitioning and multiple recycling of uranium and thorium can be realized. This will, however, require large efforts to develop the technology to the necessary industrial scale of operation. (orig.)

  12. Function-based payment model for inpatient medical rehabilitation: an evaluation.

    Science.gov (United States)

    Sutton, J P; DeJong, G; Wilkerson, D

    1996-07-01

    To describe the components of a function-based prospective payment model for inpatient medical rehabilitation that parallels diagnosis-related groups (DRGs), to evaluate this model in relation to stakeholder objectives, and to detail the components of a quality of care incentive program that, when combined with this payment model, creates an incentive for provides to maximize functional outcomes. This article describes a conceptual model, involving no data collection or data synthesis. The basic payment model described parallels DRGs. Information on the potential impact of this model on medical rehabilitation is gleaned from the literature evaluating the impact of DRGs. The conceptual model described is evaluated against the results of a Delphi Survey of rehabilitation providers, consumers, policymakers, and researchers previously conducted by members of the research team. The major shortcoming of a function-based prospective payment model for inpatient medical rehabilitation is that it contains no inherent incentive to maximize functional outcomes. Linkage of reimbursement to outcomes, however, by withholding a fixed proportion of the standard FRG payment amount, placing that amount in a "quality of care" pool, and distributing that pool annually among providers whose predesignated, facility-level, case-mix-adjusted outcomes are attained, may be one strategy for maximizing outcome goals.

  13. Risk Management and Simulation Based Live Fire Test and Evaluation in the Performance Based Defense Business Environment

    National Research Council Canada - National Science Library

    Brown, R

    1999-01-01

    The objective of this analysis is to reduce the policy and management process costs of Congressionally mandated Live Fire Test and Evaluation procedures in the new Performance Based Defense Acquisition environment...

  14. Formulation and evaluation of microemulsion-based hydrogel for topical delivery.

    Science.gov (United States)

    Sabale, Vidya; Vora, Sejal

    2012-07-01

    The purpose of this study was to develop microemulsion-based hydrogel formulation for topical delivery of bifonazole with an objective to increase the solubility and skin permeability of the drug. Oleic acid was screened as the oil phase of microemulsions, due to a good solubilizing capacity of the microemulison systems. The pseudo-ternary phase diagrams for microemulsion regions were constructed using oleic acid as the oil, Tween 80 as the surfactant and isopropyl alcohol (IPA) as the cosurfactant. Various microemulsion formulations were prepared and optimized by 3(2) factorial design on the basis of percentage (%) transmittance, globule size, zeta potential, drug release, and skin permeability. The abilities of various microemulsions to deliver bifonazole through the skin were evaluated ex vivo using Franz diffusion cells fitted with rat skins. The Hydroxy Propyl Methyl Cellulose (HPMC) K100 M as a gel matrix was used to construct the microemulsion-based hydrogel for improving the viscosity of microemulsion for topical administration. The optimized microemulsion-based hydrogel was evaluated for viscosity, spreadability, skin irritancy, skin permeability, stability, and antifungal activity by comparing it with marketed bifonazole cream. The mechanism of drug release from microemulsion-based hydrogel was observed to follow zero order kinetics. The studied optimized microemulsion-based hydrogel showed a good stability over the period of 3 months. Average globule size of optimized microemulsion (F5) was found to be 18.98 nm, zeta potential was found to be -5.56 mv, and permeability of drug from microemulsion within 8 h was observed 84%. The antifungal activity of microemulsion-based hydrogel was found to be comparable with marketed cream. The results indicate that the studied microemulsion-based hydrogel (F5) has a potential for sustained action of drug release and it may act as promising vehicle for topical delivery of ibuprofen.

  15. Optimized data evaluation for k0-based NAA

    International Nuclear Information System (INIS)

    Van Sluijs, R.; Bossus, D.A.W.

    1999-01-01

    k 0 -NAA allows the simultaneous analysis of up-to 67 elements. The k 0 method is based on calculations using a special library instead of measuring standards. For an efficient use of the method, the calculations and resulting raw data require optimized evaluation procedures. In this paper two efficient procedures for nuclide identification and gamma interference correction are outlined. For a fast computation of the source-detector efficiency and coincidence correction factors the matrix interpolation technique is introduced. (author)

  16. [Process evaluation in relation to effectiveness assessment: experiences with school-based programs].

    Science.gov (United States)

    Ariza, Carles; Villalbí, Joan R; Sánchez-Martínez, Francesca; Nebot, Manel

    2011-06-01

    Evaluation of public health interventions usually focus on the quality of design and research methods, and less on the quality of the intervention or process evaluation. In process evaluation of school-based interventions, key issues are how completely the intervention is carried out and adherence to the protocol. In addition, exploration of intermediate variables, such as those that influence (and often predict) preventable behavior, is highly useful. This article describes the basic concepts in this topic, using examples of the effectiveness of some preventive interventions carried out in schools. The interventions discussed were mainly quasi-experimental studies, based on data from programs promoted by public health teams in the city of Barcelona. Data from process evaluation of preventive programs in secondary schools that underwent formal assessment of their effectiveness is provided. The examples are drawn from preventive programs of HIV infection or unprotected sexual intercourse (PRESSEC program) and drug consumption prevention (the PASE, PASE.bcn and x kpts programs). These examples show why the intervention process influences the impact of the programs and their results. Thorough planning of process evaluation is essential to obtain valid indicators that will identify, in the effectiveness evaluation of the intervention, the most efficacious strategies to obtain positive outcomes. Copyright © 2011 Sociedad Española de Salud Pública y Administración Sanitaria. Published by Elsevier Espana. All rights reserved.

  17. Facilitating evaluations of innovative, competence-based assessment: Creating understanding and involving multiple stakeholders

    NARCIS (Netherlands)

    Gulikers, J.T.M.; Baartman, L.K.J.; Biemans, H.

    2010-01-01

    Schools are held more responsible for evaluating, quality assuring and improving their student assessments. Teachers’ lack of understanding of new, competence-based assessments as well as the lack of key stakeholders’ involvement, hamper effective and efficient self-evaluations by teachers of

  18. Facilitating evaluations of innovative, competence-based assessments: creating understanding and involving multiple stakeholders.

    NARCIS (Netherlands)

    Gulikers, J.T.M.; Baartman, L.; Biemans, H.J.A.

    2010-01-01

    Schools are held more responsible for evaluating, quality assuring and improving their student assessments. Teachers’ lack of understanding of new, competence-based assessments as well as the lack of key stakeholders’ involvement, hamper effective and efficient self-evaluations by teachers of

  19. On Spoken English Phoneme Evaluation Method Based on Sphinx-4 Computer System

    Directory of Open Access Journals (Sweden)

    Li Qin

    2017-12-01

    Full Text Available In oral English learning, HDPs (phonemes that are hard to be distinguished are areas where Chinese students frequently make mistakes in pronunciation. This paper studies a speech phoneme evaluation method for HDPs, hoping to improve the ability of individualized evaluation on HDPs and help provide a personalized learning platform for English learners. First of all, this paper briefly introduces relevant phonetic recognition technologies and pronunciation evaluation algorithms and also describes the phonetic retrieving, phonetic decoding and phonetic knowledge base in the Sphinx-4 computer system, which constitute the technological foundation for phoneme evaluation. Then it proposes an HDP evaluation model, which integrates the reliability of the speech processing system and the individualization of spoken English learners into the evaluation system. After collecting HDPs of spoken English learners and sorting them into different sets, it uses the evaluation system to recognize these HDP sets and at last analyzes the experimental results of HDP evaluation, which proves the effectiveness of the HDP evaluation model.

  20. Evaluation of Model Based State of Charge Estimation Methods for Lithium-Ion Batteries

    Directory of Open Access Journals (Sweden)

    Zhongyue Zou

    2014-08-01

    Full Text Available Four model-based State of Charge (SOC estimation methods for lithium-ion (Li-ion batteries are studied and evaluated in this paper. Different from existing literatures, this work evaluates different aspects of the SOC estimation, such as the estimation error distribution, the estimation rise time, the estimation time consumption, etc. The equivalent model of the battery is introduced and the state function of the model is deduced. The four model-based SOC estimation methods are analyzed first. Simulations and experiments are then established to evaluate the four methods. The urban dynamometer driving schedule (UDDS current profiles are applied to simulate the drive situations of an electrified vehicle, and a genetic algorithm is utilized to identify the model parameters to find the optimal parameters of the model of the Li-ion battery. The simulations with and without disturbance are carried out and the results are analyzed. A battery test workbench is established and a Li-ion battery is applied to test the hardware in a loop experiment. Experimental results are plotted and analyzed according to the four aspects to evaluate the four model-based SOC estimation methods.

  1. Engaging Street Youth in an Evaluation of a Community-Based Arts Program

    Directory of Open Access Journals (Sweden)

    Robin Wright

    2008-06-01

    Full Text Available Data from the Edmonton Arts & Youth Feasibility Study (EAYFS was used to ascertain the feasibility of engaging street youth in a structured community-based arts program and an outcome-based evaluation. The study engaged 23 street youth in a ten-week multi-media arts program focused on developing prosocial communication, team-building, and problem-solving skills. Results have shown that street youth are highly interested in artistic endeavors; will participate to the best of their circumstances; and will provide reliable data. The youth and staff reported improved art skills, problem-solving capacity, and prosocial communication as well as a decrease in drug use, depression, loneliness, and a greater sense of enjoyment about life. Strengths of the program included the arts media, the non-judgmental environment, and the support from staff. The study suggests that community-based arts programs for street youth could be subjected to a rigorous outcome-based evaluation.

  2. An Antipodean Evaluation of Problem-Based Learning by Clinical Educators.

    Science.gov (United States)

    Williams, Allison F.

    1999-01-01

    The use of problem-based learning in an Australian nursing education program was evaluated through interviews with 14 clinical teachers. They saw improvement in students' self-direction and holistic views of patients, but felt students lacked psychomotor skills and fundamental knowledge of anatomy and physiology. (SK)

  3. Evaluation of a Spiritually Based Child Maltreatment Prevention Training Program

    Science.gov (United States)

    Baker, Louisa K.; Rigazio-DiGilio, Sandra A.

    2013-01-01

    The authors empirically evaluated a spiritually based 1-day child maltreatment training program. Pretest, posttest, and follow-up results indicated that participants' recognition of hypothetical maltreatment did not increase after training. Furthermore, although participants decreased their use of items known to dissuade decisions to report, they…

  4. Competencies evaluation based on single valued neutrosophic numbers and decision analysis schema

    Directory of Open Access Journals (Sweden)

    Evelyn Jazmín Henríquez Antepara

    2017-09-01

    Full Text Available Recently, neutrosophic sets and its application to decision making have become a topic of significant importance for researchers and practitioners. The present work addresses one of the most complex aspects of the formative process based on competencies: evaluation. In this paper, a new method for competencies evaluation is developed in a multicriteria framework.

  5. Error Evaluation in a Stereovision-Based 3D Reconstruction System

    Directory of Open Access Journals (Sweden)

    Kohler Sophie

    2010-01-01

    Full Text Available The work presented in this paper deals with the performance analysis of the whole 3D reconstruction process of imaged objects, specifically of the set of geometric primitives describing their outline and extracted from a pair of images knowing their associated camera models. The proposed analysis focuses on error estimation for the edge detection process, the starting step for the whole reconstruction procedure. The fitting parameters describing the geometric features composing the workpiece to be evaluated are used as quality measures to determine error bounds and finally to estimate the edge detection errors. These error estimates are then propagated up to the final 3D reconstruction step. The suggested error analysis procedure for stereovision-based reconstruction tasks further allows evaluating the quality of the 3D reconstruction. The resulting final error estimates enable lastly to state if the reconstruction results fulfill a priori defined criteria, for example, fulfill dimensional constraints including tolerance information, for vision-based quality control applications for example.

  6. Maintainability design and evaluation of mechanical systems based on tribology

    International Nuclear Information System (INIS)

    Wani, M.F.; Gandhi, O.P.

    2002-01-01

    Maintainability of mechanical systems based on tribology is suggested and evaluated in this paper. Tribo-features of mechanical systems, which characterise maintainability are identified and are modelled in terms of tribo-maintainability digraph. The nodes in the digraph represent the tribo-features and edges represent the degree of influence among the features. A matrix, one to one representation of the digraph, is defined to develop system maintainability expression (SPF-t) based on the tribology. It is also useful in comparing the various design alternatives from tribo-maintainability point of view. Maintainability is evaluated from the tribo-maintainability index, obtained from SPF-t (i.e. permanent of the matrix) by substituting the numerical values of the features and their interdependence. A higher value of the index implies better maintainability of the systems. The proposed methodology also guides designers in enhancing the maintainability of a system by appropriately incorporating tribo-features. An example to illustrate the methodology is also presented

  7. Evaluating airline energy efficiency: An integrated approach with Network Epsilon-based Measure and Network Slacks-based Measure

    International Nuclear Information System (INIS)

    Xu, Xin; Cui, Qiang

    2017-01-01

    This paper focuses on evaluating airline energy efficiency, which is firstly divided into four stages: Operations Stage, Fleet Maintenance Stage, Services Stage and Sales Stage. The new four-stage network structure of airline energy efficiency is a modification of existing models. A new approach, integrated with Network Epsilon-based Measure and Network Slacks-based Measure, is applied to assess the overall energy efficiency and divisional efficiency of 19 international airlines from 2008 to 2014. The influencing factors of airline energy efficiency are analyzed through the regression analysis. The results indicate the followings: 1. The integrated model can identify the benchmarking airlines in the overall system and stages. 2. Most airlines' energy efficiencies keep steady during the period, except for some sharply fluctuations. The efficiency decreases mainly centralized in the year 2008–2011, affected by the financial crisis in the USA. 3. The average age of fleet is positively correlated with the overall energy efficiency, and each divisional efficiency has different significant influencing factors. - Highlights: • An integrated approach with Network Epsilon-based Measure and Network Slacks-based Measure is developed. • 19 airlines' energy efficiencies are evaluated. • Garuda Indonesia has the highest overall energy efficiency.

  8. Early evaluation and value-based pricing of regenerative medicine technologies.

    Science.gov (United States)

    Koerber, Florian; Rolauffs, Bernd; Rogowski, Wolf

    2013-11-01

    Since the first pioneering scientists explored the potential of using human cells for therapeutic purposes the branch of regenerative medicine has evolved to become a mature industry. The focus has switched from 'what can be done' to 'what can be commercialized'. Timely health economic evaluation supports successful marketing by establishing the value of a product from a healthcare system perspective. This article reports results from a research project on early health economic evaluation in collaboration with developers, clinicians and manufacturers. We present an approach to determine an early value-based price for a new treatment of cartilage defects of the knee from the area of regenerative medicine. Examples of using evaluation results for the purpose of business planning, market entry, preparing the coverage decision and managed entry are discussed.

  9. Evaluating a "Second Life" Problem-Based Learning (PBL) Demonstrator Project: What Can We Learn?

    Science.gov (United States)

    Beaumont, Chris; Savin-Baden, Maggi; Conradi, Emily; Poulton, Terry

    2014-01-01

    This article reports the findings of a demonstrator project to evaluate how effectively Immersive Virtual Worlds (IVWs) could support problem-based learning. The project designed, created and evaluated eight scenarios within "Second Life" (SL) for undergraduate courses in health care management and paramedic training. Evaluation was…

  10. Evidence-Based Evaluation of Inferior Vena Cava Filter Complications Based on Filter Type

    Science.gov (United States)

    Deso, Steven E.; Idakoji, Ibrahim A.; Kuo, William T.

    2016-01-01

    Many inferior vena cava (IVC) filter types, along with their specific risks and complications, are not recognized. The purpose of this study was to evaluate the various FDA-approved IVC filter types to determine device-specific risks, as a way to help identify patients who may benefit from ongoing follow-up versus prompt filter retrieval. An evidence-based electronic search (FDA Premarket Notification, MEDLINE, FDA MAUDE) was performed to identify all IVC filter types and device-specific complications from 1980 to 2014. Twenty-three IVC filter types (14 retrievable, 9 permanent) were identified. The devices were categorized as follows: conical (n = 14), conical with umbrella (n = 1), conical with cylindrical element (n = 2), biconical with cylindrical element (n = 2), helical (n = 1), spiral (n = 1), and complex (n = 1). Purely conical filters were associated with the highest reported risks of penetration (90–100%). Filters with cylindrical or umbrella elements were associated with the highest reported risk of IVC thrombosis (30–50%). Conical Bard filters were associated with the highest reported risks of fracture (40%). The various FDA-approved IVC filter types were evaluated for device-specific complications based on best current evidence. This information can be used to guide and optimize clinical management in patients with indwelling IVC filters. PMID:27247477

  11. Research on Evaluation Model for Secondary Task Driving Safety Based on Driver Eye Movements

    Directory of Open Access Journals (Sweden)

    Lisheng Jin

    2014-01-01

    Full Text Available This study was designed to gain insight into the influence of performing different types of secondary task while driving on driver eye movements and to build a safety evaluation model for secondary task driving. Eighteen young drivers were selected and completed the driving experiment on a driving simulator. Measures of fixations, saccades, and blinks were analyzed. Based on measures which had significant difference between the baseline and secondary tasks driving conditions, the evaluation index system was built. Method of principal component analysis (PCA was applied to analyze evaluation indexes data in order to obtain the coefficient weights of indexes and build the safety evaluation model. Based on evaluation scores, the driving safety was grouped into five levels (very high, high, average, low, and very low using K-means clustering algorithm. Results showed that secondary task driving severely distracts the driver and the evaluation model built in this study could estimate driving safety effectively under different driving conditions.

  12. Balanced scorecard-based performance evaluation of Chinese county hospitals in underdeveloped areas.

    Science.gov (United States)

    Gao, Hongda; Chen, He; Feng, Jun; Qin, Xianjing; Wang, Xuan; Liang, Shenglin; Zhao, Jinmin; Feng, Qiming

    2018-05-01

    Objective Since the Guangxi government implemented public county hospital reform in 2009, there have been no studies of county hospitals in this underdeveloped area of China. This study aimed to establish an evaluation indicator system for Guangxi county hospitals and to generate recommendations for hospital development and policymaking. Methods A performance evaluation indicator system was developed based on balanced scorecard theory. Opinions were elicited from 25 experts from administrative units, universities and hospitals and the Delphi method was used to modify the performance indicators. The indicator system and the Topsis method were used to evaluate the performance of five county hospitals randomly selected from the same batch of 2015 Guangxi reform pilots. Results There were 4 first-level indicators, 9 second-level indicators and 36 third-level indicators in the final performance evaluation indicator system that showed good consistency, validity and reliability. The performance rank of the hospitals was B > E > A > C > D. Conclusions The performance evaluation indicator system established using the balanced scorecard is practical and scientific. Analysis of the results based on this indicator system identified several factors affecting hospital performance, such as resource utilisation efficiency, medical service price, personnel structure and doctor-patient relationships.

  13. Evaluating performance-based test and specifications for sulfate resistance in concrete

    Science.gov (United States)

    2000-12-01

    This research project involved an experimental evaluation of the sulfate resistance of various concretes and mortars for the purpose of establishing performance-based specifications for the durability of concrete against sulfate attack. The research ...

  14. Technical Evaluation Report 51: Text-based Conferencing: Features vs. functionality

    Directory of Open Access Journals (Sweden)

    Lynn Anderson

    2005-11-01

    Full Text Available This report examines three text-based conferencing products: WowBB, Invision Power Board, and vBulletin. Their selection was prompted by a feature-by-feature comparison of the same products on the WowBB website. The comparison chart painted a misleading impression of WowBB’s features in relation to the other two products; so the evaluation team undertook a more comprehensive and impartial comparison using the categories and criteria for online software evaluation developed by the American Society for Training and Development (ASTD. The findings are summarised in terms of the softwares’ pricing, common features/ functions, and differentiating features.

  15. Evaluative Usage-Based Metrics for the Selection of E-Journals.

    Science.gov (United States)

    Hahn, Karla L.; Faulkner, Lila A.

    2002-01-01

    Explores electronic journal usage statistics and develops three metrics and three benchmarks based on those metrics. Topics include earlier work that assessed the value of print journals and was modified for the electronic format; the evaluation of potential purchases; and implications for standards development, including the need for content…

  16. Evaluation of a School-Based Teen Obesity Prevention Minimal Intervention

    Science.gov (United States)

    Abood, Doris A.; Black, David R.; Coster, Daniel C.

    2008-01-01

    Objective: A school-based nutrition education minimal intervention (MI) was evaluated. Design: The design was experimental, with random assignment at the school level. Setting: Seven schools were randomly assigned as experimental, and 7 as delayed-treatment. Participants: The experimental group included 551 teens, and the delayed treatment group…

  17. A comprehensive method for evaluating precision of transfer alignment on a moving base

    Science.gov (United States)

    Yin, Hongliang; Xu, Bo; Liu, Dezheng

    2017-09-01

    In this study, we propose the use of the Degree of Alignment (DOA) in engineering applications for evaluating the precision of and identifying the transfer alignment on a moving base. First, we derive the statistical formula on the basis of estimations. Next, we design a scheme for evaluating the transfer alignment on a moving base, for which the attitude error cannot be directly measured. Then, we build a mathematic estimation model and discuss Fixed Point Smoothing (FPS), Returns to Scale (RTS), Inverted Sequence Recursive Estimation (ISRE), and Kalman filter estimation methods, which can be used when evaluating alignment accuracy. Our theoretical calculations and simulated analyses show that the DOA reflects not only the alignment time and accuracy but also differences in the maneuver schemes, and is suitable for use as an integrated evaluation index. Furthermore, all four of these algorithms can be used to identify the transfer alignment and evaluate its accuracy. We recommend RTS in particular for engineering applications. Generalized DOAs should be calculated according to the tactical requirements.

  18. USING PCU-CAMEL, A WEB-BASED LEARNING ENVIRONMENT, IN EVALUATING TEACHING-LEARNING PROCESS

    Directory of Open Access Journals (Sweden)

    Arlinah Imam Rahardjo

    2008-01-01

    Full Text Available PCU-CAMEL (Petra Christian University-Computer Aided Mechanical Engineering Department Learning Environment has been developed to integrate the use of this web-based learning environment into the traditional, face-to-face setting of class activities. This integrated learning method is designed as an effort to enrich and improve the teaching-learning process at Petra Christian University. A study was conducted to introduce the use of PCU-CAMEL as a tool in evaluating teaching learning process. The study on this method of evaluation was conducted by using a case analysis on the integration of PCU-CAMEL to the traditional face-to-face meetings of LIS (Library Information System class at the Informatics Engineering Department of Petra Christian University. Students’ responses documented in some features of PCU-CAMEL were measured and analyzed to evaluate the effectiveness of this integrated system in developing intrinsic motivation of the LIS students of the first and second semester of 2004/2005 to learn. It is believed that intrinsic motivation can drive students to learn more. From the study conducted, it is concluded that besides its capability in developing intrinsic motivation, PCU-CAMEL as a web-based learning environment, can also serve as an effective tool for both students and instructors to evaluate the teaching-learning process. However, some weaknesses did exist in using this method of evaluating teaching-learning process. The free style and unstructured form of the documentation features of this web-based learning environment can lead to ineffective evaluation results

  19. The development of macros program-based cognitive evaluation model via e-learning course mathematics in senior high school based on curriculum 2013

    Directory of Open Access Journals (Sweden)

    Djoko Purnomo

    2017-02-01

    Full Text Available The specific purpose of this research is: The implementation of the application of the learning tool with a form cognitive learning evaluation model based macros program via E-learning at High School grade X at july-december based on 2013 curriculum. The method used in this research followed the procedures is research and development by Borg and Gall [2]. In second year, population analysis has conducted at several universities in Semarang. The results of the research and application development of macro program-based cognitive evaluation model is effective which can be seen from (1 the student learning result is over KKM, (2 The student independency affects learning result positively, (3 the student learning a result by using macros program-based cognitive evaluation model is better than students class control. Based on the results above, the development of macros program-based cognitive evaluation model that have been tested have met quality standards according to Akker (1999. Large-scale testing includes operational phase of field testing and final product revision, i.e trials in the wider class that includes students in mathematics education major in several universities, they are the Universitas PGRI Semarang, Universitas Islam Sultan Agung and the Universitas Islam NegeriWalisongo Semarang. The positive responses is given by students at the Universitas PGRI Semarang, Universitas Islam Sultan Agung and the Universitas Islam NegeriWalisongo Semarang.

  20. Web-Based versus Paper-Based Data Collection for the Evaluation of Teaching Activity: Empirical Evidence from a Case Study

    Science.gov (United States)

    Lalla, Michele; Ferrari, Davide

    2011-01-01

    The collection of teaching evaluation questionnaires in the traditional paper-and-pencil format is a costly and time-consuming process and yet it is a common assessment practice in many university systems. Web-based data collection would reduce costs and significantly increase the efficiency of the overall evaluation process in numerous ways.…

  1. Using learning analytics to evaluate a video-based lecture series.

    Science.gov (United States)

    Lau, K H Vincent; Farooque, Pue; Leydon, Gary; Schwartz, Michael L; Sadler, R Mark; Moeller, Jeremy J

    2018-01-01

    The video-based lecture (VBL), an important component of the flipped classroom (FC) and massive open online course (MOOC) approaches to medical education, has primarily been evaluated through direct learner feedback. Evaluation may be enhanced through learner analytics (LA) - analysis of quantitative audience usage data generated by video-sharing platforms. We applied LA to an experimental series of ten VBLs on electroencephalography (EEG) interpretation, uploaded to YouTube in the model of a publicly accessible MOOC. Trends in view count; total percentage of video viewed and audience retention (AR) (percentage of viewers watching at a time point compared to the initial total) were examined. The pattern of average AR decline was characterized using regression analysis, revealing a uniform linear decline in viewership for each video, with no evidence of an optimal VBL length. Segments with transient increases in AR corresponded to those focused on core concepts, indicative of content requiring more detailed evaluation. We propose a model for applying LA at four levels: global, series, video, and feedback. LA may be a useful tool in evaluating a VBL series. Our proposed model combines analytics data and learner self-report for comprehensive evaluation.

  2. Evaluation of Smoking Prevention Television Messages Based on the Elaboration Likelihood Model

    Science.gov (United States)

    Flynn, Brian S.; Worden, John K.; Bunn, Janice Yanushka; Connolly, Scott W.; Dorwaldt, Anne L.

    2011-01-01

    Progress in reducing youth smoking may depend on developing improved methods to communicate with higher risk youth. This study explored the potential of smoking prevention messages based on the Elaboration Likelihood Model (ELM) to address these needs. Structured evaluations of 12 smoking prevention messages based on three strategies derived from…

  3. Neurally based measurement and evaluation of environmental noise

    CERN Document Server

    Soeta, Yoshiharu

    2015-01-01

    This book deals with methods of measurement and evaluation of environmental noise based on an auditory neural and brain-oriented model. The model consists of the autocorrelation function (ACF) and the interaural cross-correlation function (IACF) mechanisms for signals arriving at the two ear entrances. Even when the sound pressure level of a noise is only about 35 dBA, people may feel annoyed due to the aspects of sound quality. These aspects can be formulated by the factors extracted from the ACF and IACF. Several examples of measuring environmental noise—from outdoor noise such as that of aircraft, traffic, and trains, and indoor noise such as caused by floor impact, toilets, and air-conditioning—are demonstrated. According to the noise measurement and evaluation, applications for sound design are discussed. This book provides an excellent resource for students, researchers, and practitioners in a wide range of fields, such as the automotive, railway, and electronics industries, and soundscape, architec...

  4. Theory-Based Stakeholder Evaluation – applied. Competing Stakeholder Theories in the Quality Management of Primary Education

    DEFF Research Database (Denmark)

    Hansen, Morten Balle; Heilesen, J. B.

    In the broader context of evaluation design, this paper examines and compares pros and cons of a theory-based approach to evaluation (TBE) with the Theory-Based Stakeholder evaluation (TSE) model, introduced by Morten Balle Hansen and Evert Vedung (Hansen and Vedung 2010). While most approaches...... to TBE construct one unitary theory of the program (Coryn et al. 2011), the TSE-model emphasizes the importance of keeping theories of diverse stakeholders apart. This paper applies the TSE-model to an evaluation study conducted by the Danish Evaluation Institute (EVA) of the Danish system of quality......-model, as an alternative to traditional program theory evaluation....

  5. Belief-rule-based expert systems for evaluation of e-government

    DEFF Research Database (Denmark)

    Hossain, Mohammad Shahadat; Zander, Pär-Ola Mikael; Kamal, Md Sarwar

    2015-01-01

    , known as the Belief Rule Based Expert System (BRBES) and implemented in the local e-government of Bangladesh. The results have been compared with a recently developed method of evaluating e-government, and it is demonstrated that the results of the BRBES are more accurate and reliable. The BRBES can...

  6. Theory-Based Evaluation Meets Ambiguity: The Role of Janus Variables

    Science.gov (United States)

    Dahler-Larsen, Peter

    2018-01-01

    As theory-based evaluation (TBE) engages in situations where multiple stakeholders help develop complex program theory about dynamic phenomena in politically contested settings, it becomes difficult to develop and use program theory without ambiguity. The purpose of this article is to explore ambiguity as a fruitful perspective that helps TBE face…

  7. Evaluation of Road Performance Based on International Roughness Index and Falling Weight Deflectometer

    Science.gov (United States)

    Hasanuddin; Setyawan, A.; Yulianto, B.

    2018-03-01

    Assessment to the performance of road pavement is deemed necessary to improve the management quality of road maintenance and rehabilitation. This research to evaluate the road base on functional and structural and recommendations handling done. Assessing the pavement performance is conducted with functional and structural evaluation. Functional evaluation of pavement is based on the value of IRI (International Roughness Index) which among others is derived from reading NAASRA for analysis and recommended road handling. Meanwhile, structural evaluation of pavement is done by analyzing deflection value based on FWD (Falling Weight Deflectometer) data resulting in SN (Structural Number) value. The analysis will result in SN eff (Structural Number Effective) and SN f (Structural Number Future) value obtained from comparing SN eff to SN f value that leads to SCI (Structural Condition Index) value. SCI value implies the possible recommendation for handling pavement. The study done to Simpang Tuan-Batas Kota Jambi road segment was based on functional analysis. The study indicated that the road segment split into 12 segments in which segment 1, 3, 5, 7, 9, and 11 were of regular maintenance, segment 2, 4, 8, 10, 12 belonged to periodic maintenance, and segment 6 was of rehabilitation. The structural analysis resulted in 8 segments consisting of segment 1 and 2 recommended for regular maintenance, segment 3, 4, 5, and 7 for functional overlay, and 6 and 8 were of structural overlay.

  8. A Java-based fMRI processing pipeline evaluation system for assessment of univariate general linear model and multivariate canonical variate analysis-based pipelines.

    Science.gov (United States)

    Zhang, Jing; Liang, Lichen; Anderson, Jon R; Gatewood, Lael; Rottenberg, David A; Strother, Stephen C

    2008-01-01

    As functional magnetic resonance imaging (fMRI) becomes widely used, the demands for evaluation of fMRI processing pipelines and validation of fMRI analysis results is increasing rapidly. The current NPAIRS package, an IDL-based fMRI processing pipeline evaluation framework, lacks system interoperability and the ability to evaluate general linear model (GLM)-based pipelines using prediction metrics. Thus, it can not fully evaluate fMRI analytical software modules such as FSL.FEAT and NPAIRS.GLM. In order to overcome these limitations, a Java-based fMRI processing pipeline evaluation system was developed. It integrated YALE (a machine learning environment) into Fiswidgets (a fMRI software environment) to obtain system interoperability and applied an algorithm to measure GLM prediction accuracy. The results demonstrated that the system can evaluate fMRI processing pipelines with univariate GLM and multivariate canonical variates analysis (CVA)-based models on real fMRI data based on prediction accuracy (classification accuracy) and statistical parametric image (SPI) reproducibility. In addition, a preliminary study was performed where four fMRI processing pipelines with GLM and CVA modules such as FSL.FEAT and NPAIRS.CVA were evaluated with the system. The results indicated that (1) the system can compare different fMRI processing pipelines with heterogeneous models (NPAIRS.GLM, NPAIRS.CVA and FSL.FEAT) and rank their performance by automatic performance scoring, and (2) the rank of pipeline performance is highly dependent on the preprocessing operations. These results suggest that the system will be of value for the comparison, validation, standardization and optimization of functional neuroimaging software packages and fMRI processing pipelines.

  9. An evaluation method on seat comfort based on optical motion capture

    Directory of Open Access Journals (Sweden)

    Qing TAO

    2015-10-01

    Full Text Available To research the sitting posture comfort evaluation method, through the example of comfort evaluation of the ergonomic seat and standard office seat, a methodology is introduced to evaluate the sitting posture comfort combining ergonomics theory. The proposed method is based on optical motion capture system, pressure sensor and JACK software, and TRC file is acquired by using EVART real-time capture software for identifying the spatial motion trail of human body. Then MATLAB software is used to analyze the human body motion data, and the sitting posture angle difference data for human body in different seats is acquired. TRC file is loaded into JACK software, and with the TAT REPORTER of JACK software, muscle force, moment of force and fatigue data, etc. are output, which are compared with the actual measured data from experiments, and ergonomics method is used for the evaluation. The result shows that the method of considering joint angles combining JACK software for data output is effective for evaluating sitting comfort.

  10. Evaluation of a web-based lifestyle coach designed to maintain a healthy bodyweight

    NARCIS (Netherlands)

    Kelders, Saskia Marion; van Gemert-Pijnen, Julia E.W.C.; Werkman, Andrea; Seydel, E.R.

    2010-01-01

    We evaluated a web-based intervention, the Healthy Weight Assistant (HWA), which was designed to help people with a healthy bodyweight, or those who are slightly overweight, to achieve and maintain a healthy weight. Four evaluation methods were used: (1) pre- and post-test questionnaires; (2) real

  11. How Feedback Can Improve Managerial Evaluations of Model-based Marketing Decision Support Systems

    NARCIS (Netherlands)

    U. Kayande (Ujwal); A. de Bruyn (Arnoud); G.L. Lilien (Gary); A. Rangaswamy (Arvind); G.H. van Bruggen (Gerrit)

    2006-01-01

    textabstractMarketing managers often provide much poorer evaluations of model-based marketing decision support systems (MDSSs) than are warranted by the objective performance of those systems. We show that a reason for this discrepant evaluation may be that MDSSs are often not designed to help users

  12. Measurement-Based Performance Evaluation of Advanced MIMO Transceiver Designs

    Directory of Open Access Journals (Sweden)

    Schneider Christian

    2005-01-01

    Full Text Available This paper describes the methodology and the results of performance investigations on a multiple-input multiple-output (MIMO transceiver scheme for frequency-selective radio channels. The method relies on offline simulations and employs real-time MIMO channel sounder measurement data to ensure a realistic channel modeling. Thus it can be classified in between the performance evaluation using some predefined channel models and the evaluation of a prototype hardware in field experiments. New aspects for the simulation setup are discussed, which are frequently ignored when using simpler model-based evaluations. Example simulations are provided for an iterative ("turbo" MIMO equalizer concept. The dependency of the achievable bit error rate performance on the propagation characteristics and on the variation in some system design parameters is shown, whereas the antenna constellation is of particular concern for MIMO systems. Although in many of the considered constellations turbo MIMO equalization appears feasible in real field scenarios, there exist cases with poor performance as well, indicating that in practical applications link adaptation of the transmitter and receiver processing to the environment is necessary.

  13. Evaluate Yourself. Evaluation: Research-Based Decision Making Series, Number 9304.

    Science.gov (United States)

    Fetterman, David M.

    This document considers both self-examination and external evaluation of gifted and talented education programs. Principles of the self-examination process are offered, noting similarities to external evaluation models. Principles of self-evaluation efforts include the importance of maintaining a nonjudgmental orientation, soliciting views from…

  14. Evaluation of template-based models in CASP8 with standard measures

    KAUST Repository

    Cozzetto, Domenico; Kryshtafovych, Andriy; Fidelis, Krzysztof; Moult, John; Rost, Burkhard; Tramontano, Anna

    2009-01-01

    The strategy for evaluating template-based models submitted to CASP has continuously evolved from CASP1 to CASP5, leading to a standard procedure that has been used in all subsequent editions. The established approach includes methods

  15. Advances in complex reservoir evaluation based on geophysical well logs

    Energy Technology Data Exchange (ETDEWEB)

    Fertl, W.H.; Sinha, A.K. (Western Atlas International, Inc., Houston, TX (USA)); McDougall, J.G. (Western Atlas Canada Ltd., Calgary, AB (Canada))

    1988-09-01

    The matrix of reservoirs having complex lithologies, cause different density, neutron, and acoustic responses. Therefore the lithologies and effective porosity of reservoirs can be determined by using various crossplot techniques on data collected from two of these logs. The Complex Reservoir Analysis program (CRA) computes lithology, porosity, water saturation and relative permeabilities in formations with interbedded limestone, dolomite, and anhydrite. Porosity options include crossplot and individual log response techniques. Corrections for light hydrocarbons were applied. In solving for porosity and mineral volumes, sand, limestone, dolomite, and anhydrite lines were defined on either density/neutron or neutron/acoustic crossplots. Four additional mineral lines were specified. Incorporation of Pe data from the Z-Densilog provided a significant advance in evaluating complex reservoirs via the Z-CRA analysis. The classic reservoir evaluation program CLASS, was used to perform both minerals and shaly evaluation based on density, neutron, resistivity, and natural gamma ray spectral measurements. Computations included total and effective porosities, fluid saturation distribution based on the Wasman-Smits model, productivity indices, and volume and distribution of clay minerals. Additional computed formation parameters included log-derived cation exchange capacity and hydrogen index of dry clay matrix to determine the type and amount of smectite, illite and chlorite/kaolinite present. Canadian field experiences was used to illustrate and support the techniques described. 11 refs., 11 figs., 6 tabs.

  16. Evaluating conducting network based transparent electrodes from geometrical considerations

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, Ankush [Chemistry and Physics of Materials Unit, Jawaharlal Nehru Centre for Advanced Scientific Research, 560064 Bangalore (India); Kulkarni, G. U., E-mail: guk@cens.res.in [Centre for Nano and Soft Matter Sciences, 560013 Bangalore (India)

    2016-01-07

    Conducting nanowire networks have been developed as viable alternative to existing indium tin oxide based transparent electrode (TE). The nature of electrical conduction and process optimization for electrodes have gained much from the theoretical models based on percolation transport using Monte Carlo approach and applying Kirchhoff's law on individual junctions and loops. While most of the literature work pertaining to theoretical analysis is focussed on networks obtained from conducting rods (mostly considering only junction resistance), hardly any attention has been paid to those made using template based methods, wherein the structure of network is neither similar to network obtained from conducting rods nor similar to well periodic geometry. Here, we have attempted an analytical treatment based on geometrical arguments and applied image analysis on practical networks to gain deeper insight into conducting networked structure particularly in relation to sheet resistance and transmittance. Many literature examples reporting networks with straight or curvilinear wires with distributions in wire width and length have been analysed by treating the networks as two dimensional graphs and evaluating the sheet resistance based on wire density and wire width. The sheet resistance values from our analysis compare well with the experimental values. Our analysis on various examples has revealed that low sheet resistance is achieved with high wire density and compactness with straight rather than curvilinear wires and with narrower wire width distribution. Similarly, higher transmittance for given sheet resistance is possible with narrower wire width but of higher thickness, minimal curvilinearity, and maximum connectivity. For the purpose of evaluating active fraction of the network, the algorithm was made to distinguish and quantify current carrying backbone regions as against regions containing only dangling or isolated wires. The treatment can be helpful in

  17. Evaluating conducting network based transparent electrodes from geometrical considerations

    International Nuclear Information System (INIS)

    Kumar, Ankush; Kulkarni, G. U.

    2016-01-01

    Conducting nanowire networks have been developed as viable alternative to existing indium tin oxide based transparent electrode (TE). The nature of electrical conduction and process optimization for electrodes have gained much from the theoretical models based on percolation transport using Monte Carlo approach and applying Kirchhoff's law on individual junctions and loops. While most of the literature work pertaining to theoretical analysis is focussed on networks obtained from conducting rods (mostly considering only junction resistance), hardly any attention has been paid to those made using template based methods, wherein the structure of network is neither similar to network obtained from conducting rods nor similar to well periodic geometry. Here, we have attempted an analytical treatment based on geometrical arguments and applied image analysis on practical networks to gain deeper insight into conducting networked structure particularly in relation to sheet resistance and transmittance. Many literature examples reporting networks with straight or curvilinear wires with distributions in wire width and length have been analysed by treating the networks as two dimensional graphs and evaluating the sheet resistance based on wire density and wire width. The sheet resistance values from our analysis compare well with the experimental values. Our analysis on various examples has revealed that low sheet resistance is achieved with high wire density and compactness with straight rather than curvilinear wires and with narrower wire width distribution. Similarly, higher transmittance for given sheet resistance is possible with narrower wire width but of higher thickness, minimal curvilinearity, and maximum connectivity. For the purpose of evaluating active fraction of the network, the algorithm was made to distinguish and quantify current carrying backbone regions as against regions containing only dangling or isolated wires. The treatment can be helpful in

  18. COMPARISON AND EVALUATION OF CLUSTER BASED IMAGE SEGMENTATION TECHNIQUES

    OpenAIRE

    Hetangi D. Mehta*, Daxa Vekariya, Pratixa Badelia

    2017-01-01

    Image segmentation is the classification of an image into different groups. Numerous algorithms using different approaches have been proposed for image segmentation. A major challenge in segmentation evaluation comes from the fundamental conflict between generality and objectivity. A review is done on different types of clustering methods used for image segmentation. Also a methodology is proposed to classify and quantify different clustering algorithms based on their consistency in different...

  19. The Evidence-Based Evaluation of Iron Deficiency Anemia.

    Science.gov (United States)

    Hempel, Eliana V; Bollard, Edward R

    2016-09-01

    Anemia is a prevalent disease with multiple possible etiologies and resultant complications. Iron deficiency anemia is a common cause of anemia and is typically due to insufficient intake, poor absorption, or overt or occult blood loss. Distinguishing iron deficiency from other causes of anemia is integral to initiating the appropriate treatment. In addition, identifying the underlying cause of iron deficiency is also necessary to help guide management of these patients. We review the key components to an evidence-based, cost-conscious evaluation of suspected iron deficiency anemia. Copyright © 2016 Elsevier Inc. All rights reserved.

  20. An evaluation and acceptance of COTS software for FPGA-based controllers in NPPS

    International Nuclear Information System (INIS)

    Jung, Sejin; Kim, Eui-Sub; Yoo, Junbeom; Kim, Jang-Yeol; Choi, Jong Gyun

    2016-01-01

    Highlights: • All direct/indirect COTS SW should be dedicated. • FPGA synthesis tools are important for the safety of new digital I&Cs. • No standards/reports are yet available to deal with the indirect SW – FPGA synthesis tools. • This paper proposes a new evaluation/acceptance process and criteria for indirect SW. - Abstract: FPGA (Field-Programmable Gate Array) has received much attention from nuclear industry as an alternative platform of PLC (Programmable Logic Controller)-based digital I&C (Instrumentation & Control). Software aspect of FPGA development encompasses several commercial tools such as logic synthesis and P&R (Place & Route), which should be first dedicated in accordance with domestic standards based on EPRI NP-5652. Even if a state-of-the-art supplementary EPRI TR-1025243 makes an effort, the dedication of indirect COTS (Commercial Off-The-Shelf) SW such as FPGA logic synthesis tools has still caused a dispute. This paper proposes an acceptance process and evaluation criteria, specific to COTS SW, not commercial-grade direct items. It specifically incorporates indirect COTS SW and also provides categorized evaluation criteria for acceptance. It provides an explicit linkage between acceptance methods (Verification and Validation techniques) and evaluation criteria, too. We tried to perform the evaluation and acceptance process upon a commercial FPGA logic synthesis tool being used to develop a new FPGA-based digital I&C in Korea, and could confirm its applicability.

  1. Evaluation of DVH-based treatment plan verification in addition to gamma passing rates for head and neck IMRT

    International Nuclear Information System (INIS)

    Visser, Ruurd; Wauben, David J.L.; Groot, Martijn de; Steenbakkers, Roel J.H.M.; Bijl, Henk P.; Godart, Jeremy; Veld, Aart A. van’t; Langendijk, Johannes A.; Korevaar, Erik W.

    2014-01-01

    Background and purpose: Treatment plan verification of intensity modulated radiotherapy (IMRT) is generally performed with the gamma index (GI) evaluation method, which is difficult to extrapolate to clinical implications. Incorporating Dose Volume Histogram (DVH) information can compensate for this. The aim of this study was to evaluate DVH-based treatment plan verification in addition to the GI evaluation method for head and neck IMRT. Materials and methods: Dose verifications of 700 subsequent head and neck cancer IMRT treatment plans were categorised according to gamma and DVH-based action levels. Fractionation dependent absolute dose limits were chosen. The results of the gamma- and DVH-based evaluations were compared to the decision of the medical physicist and/or radiation oncologist for plan acceptance. Results: Nearly all treatment plans (99.7%) were accepted for treatment according to the GI evaluation combined with DVH-based verification. Two treatment plans were re-planned according to DVH-based verification, which would have been accepted using the evaluation alone. DVH-based verification increased insight into dose delivery to patient specific structures increasing confidence that the treatment plans were clinically acceptable. Moreover, DVH-based action levels clearly distinguished the role of the medical physicist and radiation oncologist within the Quality Assurance (QA) procedure. Conclusions: DVH-based treatment plan verification complements the GI evaluation method improving head and neck IMRT-QA

  2. Construction of road network vulnerability evaluation index based on general travel cost

    Science.gov (United States)

    Leng, Jun-qiang; Zhai, Jing; Li, Qian-wen; Zhao, Lin

    2018-03-01

    With the development of China's economy and the continuous improvement of her urban road network, the vulnerability of the urban road network has attracted increasing attention. Based on general travel cost, this work constructs the vulnerability evaluation index for the urban road network, and evaluates the vulnerability of the urban road network from the perspective of user generalised travel cost. Firstly, the generalised travel cost model is constructed based on vehicle cost, travel time, and traveller comfort. Then, the network efficiency index is selected as an evaluation index of vulnerability: the network efficiency index is composed of the traffic volume and the generalised travel cost, which are obtained from the equilibrium state of the network. In addition, the research analyses the influence of traffic capacity decrease, road section attribute value, and location of road section, on vulnerability. Finally, the vulnerability index is used to analyse the local area network of Harbin and verify its applicability.

  3. Projection pursuit water quality evaluation model based on chicken swam algorithm

    Science.gov (United States)

    Hu, Zhe

    2018-03-01

    In view of the uncertainty and ambiguity of each index in water quality evaluation, in order to solve the incompatibility of evaluation results of individual water quality indexes, a projection pursuit model based on chicken swam algorithm is proposed. The projection index function which can reflect the water quality condition is constructed, the chicken group algorithm (CSA) is introduced, the projection index function is optimized, the best projection direction of the projection index function is sought, and the best projection value is obtained to realize the water quality evaluation. The comparison between this method and other methods shows that it is reasonable and feasible to provide decision-making basis for water pollution control in the basin.

  4. Study on corporate social responsibility evaluation system based on stakeholder theory

    Science.gov (United States)

    Ma, J.; Deng, Liming

    2011-10-01

    The issue of Corporate Social Responsibility (CSR) has been attracting the attention from many disciplines such as economics, management, laws, sociality and philosophy since last century. The purpose of this study is to explore the impact of CSR on performance and develop a CSR evaluation system. Building on the definition of CSR and Stakeholder theory, this article built a path-relationship model of CSR and business operation performance. The paper also constructed CSR evaluation system based on KLD index, GRJ report, CSR accounting account, SA8000, ISO14000 etc. The research provides a basis for future studies about the relationship between CSR and business performance and shed some light on the evaluation of CSR practices.

  5. Evaluating a hybrid web-based basic genetics course for health professionals.

    Science.gov (United States)

    Wallen, Gwenyth R; Cusack, Georgie; Parada, Suzan; Miller-Davis, Claiborne; Cartledge, Tannia; Yates, Jan

    2011-08-01

    Health professionals, particularly nurses, continue to struggle with the expanding role of genetics information in the care of their patients. This paper describes an evaluation study of the effectiveness of a hybrid basic genetics course for healthcare professionals combining web-based learning with traditional face-to-face instructional techniques. A multidisciplinary group from the National Institutes of Health (NIH) created "Basic Genetics Education for Healthcare Providers" (BGEHCP). This program combined 7 web-based self-education modules with monthly traditional face-to-face lectures by genetics experts. The course was pilot tested by 186 healthcare providers from various disciplines with 69% (n=129) of the class registrants enrolling in a pre-post evaluation trial. Outcome measures included critical thinking knowledge items and a Web-based Learning Environment Inventory (WEBLEI). Results indicated a significant (peffectiveness particularly in the area of convenience, access and the course structure and design. Although significant increases in overall knowledge scores were achieved, scores in content areas surrounding genetic risk identification and ethical issues regarding genetic testing reflected continued gaps in knowledge. Web-based genetics education may help overcome genetics knowledge deficits by providing access for health professionals with diverse schedules in a variety of national and international settings. Published by Elsevier Ltd.

  6. Evaluation of the Project Management Competences Based on the Semantic Networks

    Directory of Open Access Journals (Sweden)

    Constanta Nicoleta BODEA

    2008-01-01

    Full Text Available The paper presents the testing and evaluation facilities of the SinPers system. The SinPers is a web based learning environment in project management, capable of building and conducting a complete and personalized training cycle, from the definition of the learning objectives to the assessment of the learning results for each learner. The testing and evaluation facilities of SinPers system are based on the ontological approach. The educational ontology is mapped on a semantic network. Further, the semantic network is projected into a concept space graph. The semantic computability of the concept space graph is used to design the tests. The paper focuses on the applicability of the system in the certification, for the knowledge assessment, related to each element of competence. The semantic computability is used for differentiating between different certification levels.

  7. Study on Evaluation Indicators System of Crowd Management for Transfer Stations Based on Pedestrian Simulation

    Directory of Open Access Journals (Sweden)

    Guanghou Zhang

    2011-12-01

    Full Text Available Improving safety and convenience of transfer is one of the most vital tasks in subway system planning, design and operation management. Because of complicated space layout and crowded pedestrian, crowd control is a big challenge for management of transfer stations. Thus, a quantitative evaluation should be done before improvement measures are carried out. Literature review showed that present evaluation indicators about crowd management in subway system were all based on fixed value or experience. Dynamic effect caused by pedestrian congestion and various facility combination cannot be represented based on these indicators. Thus, in this paper, based on the pedestrian simulation tool, dynamic evaluation indicators system of crowd management was established from the point of safety, cost-effectiveness and comfort. In order to aid decision makers to identify the most appropriate scenario to improve the effectiveness of crowd management, Matter-Element Analysis (MEA was used to rate different scenarios. A pedestrian simulation model of a designing intermodal transfer station was built and four different scenarios were tested to demonstrate how to use this indicators system. Simulation results were evaluated based on the dynamic indicators system and MEA. The application results show that the dynamic evaluation indicators system is operational and can reflect level of the crowd management in transfer station comprehensively and precisely.

  8. Web-based oral health promotion program for older adults: Development and preliminary evaluation.

    Science.gov (United States)

    Mariño, Rodrigo J; Marwaha, Parul; Barrow, Su-Yan

    2016-07-01

    This study reports on the impact evaluation of a Web-based oral health promotion programme aimed at improving the oral health knowledge, attitudes, practices and self-efficacy of independent-living older adults from Melbourne, Australia. With ethics approval from the University of Melbourne, a convenience sample of volunteers 55 years or older was invited to participate in a study to test a web-based oral health promotion program. Consenting volunteers were asked to undergo a structured interview as part of the pre-intervention data collection. The intervention was based on the ORHIS (Oral Health Information Seminars/Sheets) Model and involved computer interaction with six oral health presentations, with no direct oral health professional input. A one group pre-test-post-test quasi-experimental design was chosen to evaluate the intervention. A series of paired t-tests were used to compare pre-test with post-test results. Forty-seven active, independent-living older adults participated in this evaluation. After the intervention participants responded with higher levels of achievement than before participating in this Web-based oral health program. Participants showed significant improvements in oral health attitudes (4.10 vs. 4.94; p<0.01), knowledge (18.37 vs. 23.83; p<0.0001), and self-efficacy (84.37 vs.89.23; p<0.01), as well as, self-reported oral hygiene practices (i.e., frequency of use of dental floss) (p<0.05). The e-ORHIS approach was successful in improving oral health knowledge, attitudes and self-efficacy. As such, it represents a helpful approach for the design of (oral) health interventions in older adults. Further evaluation with a larger sample is required to test the long-term impact including the economic evaluation of the e-ORHIS approach. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  9. Comparison and Analysis of Evaluation System of Child Care Program in Primary Health Care System in the East Azerbaijan Province Based on Comprehensive Evaluation Model (CIPP

    Directory of Open Access Journals (Sweden)

    Yalda Mousa Zadeh

    2015-08-01

    Full Text Available Background and objectives: Planning plays an important role in improving children's health and an evaluation system is necessary to planning. The purpose of this study was comparing and analyzing evaluation system of child care program in primary health care system in the Eastern Azerbaijan province based on Comprehensive Evaluation Model (CIPP. Material and Methods : This is a cross sectional study. The process includes a review of current evaluation system, comparison and analysis of the system based on a comprehensive model and to assess and identify the strengths and weaknesses of the current systems. The quantitative methods (such as brainstorming, observation and interview and consensus of study group about the results of the study were used for analyzing and interpreting results. Results: It showed that not enough attention was paid to the context and performance and the content of evaluation just includes inputs and processes based on the finding. Specific criteria and impact were considered in four areas (context, input, process and outcome and all levels which were according to the proposal and based on the CIPP model. Conclusion: Evaluation is a control process tool by higher levels and self-assessment by service provider is not considered in the current system. Evaluation includes quantitative aspects and not the quality of process. So, it is recommended that forecasting system that utilizes evaluation will result in improving future planning and a scientific model to be used in designing evaluation program. ​

  10. Secondary Data Analyses of Subjective Outcome Evaluation Data Based on Nine Databases

    Directory of Open Access Journals (Sweden)

    Daniel T. L. Shek

    2012-01-01

    Full Text Available The purpose of this study was to evaluate the effectiveness of the Tier 1 Program of the Project P.A.T.H.S. (Positive Adolescent Training through Holistic Social Programmes in Hong Kong by analyzing 1,327 school-based program reports submitted by program implementers. In each report, program implementers were invited to write down five conclusions based on an integration of the subjective outcome evaluation data collected from the program participants and program implementers. Secondary data analyses were carried out by aggregating nine databases, with 14,390 meaningful units extracted from 6,618 conclusions. Results showed that most of the conclusions were positive in nature. The findings generally showed that the workers perceived the program and program implementers to be positive, and they also pointed out that the program could promote holistic development of the program participants in societal, familial, interpersonal, and personal aspects. However, difficulties encountered during program implementation (2.15% and recommendations for improvement were also reported (16.26%. In conjunction with the evaluation findings based on other strategies, the present study suggests that the Tier 1 Program of the Project P.A.T.H.S. is beneficial to the holistic development of the program participants.

  11. VOLUMETRIC METHOD FOR EVALUATION OF BEACHES VARIABILITY BASED ON GIS-TOOLS

    Directory of Open Access Journals (Sweden)

    V. V. Dolotov

    2015-01-01

    Full Text Available In frame of cadastral beach evaluation the volumetric method of natural variability index is proposed. It base on spatial calculations with Cut-Fill method and volume accounting ofboththe common beach contour and specific areas for the each time.

  12. Impact of region contouring variability on image-based focal therapy evaluation

    Science.gov (United States)

    Gibson, Eli; Donaldson, Ian A.; Shah, Taimur T.; Hu, Yipeng; Ahmed, Hashim U.; Barratt, Dean C.

    2016-03-01

    Motivation: Focal therapy is an emerging low-morbidity treatment option for low-intermediate risk prostate cancer; however, challenges remain in accurately delivering treatment to specified targets and determining treatment success. Registered multi-parametric magnetic resonance imaging (MPMRI) acquired before and after treatment can support focal therapy evaluation and optimization; however, contouring variability, when defining the prostate, the clinical target volume (CTV) and the ablation region in images, reduces the precision of quantitative image-based focal therapy evaluation metrics. To inform the interpretation and clarify the limitations of such metrics, we investigated inter-observer contouring variability and its impact on four metrics. Methods: Pre-therapy and 2-week-post-therapy standard-of-care MPMRI were acquired from 5 focal cryotherapy patients. Two clinicians independently contoured, on each slice, the prostate (pre- and post-treatment) and the dominant index lesion CTV (pre-treatment) in the T2-weighted MRI, and the ablated region (post-treatment) in the dynamic-contrast- enhanced MRI. For each combination of clinician contours, post-treatment images were registered to pre-treatment images using a 3D biomechanical-model-based registration of prostate surfaces, and four metrics were computed: the proportion of the target tissue region that was ablated and the target:ablated region volume ratio for each of two targets (the CTV and an expanded planning target volume). Variance components analysis was used to measure the contribution of each type of contour to the variance in the therapy evaluation metrics. Conclusions: 14-23% of evaluation metric variance was attributable to contouring variability (including 6-12% from ablation region contouring); reducing this variability could improve the precision of focal therapy evaluation metrics.

  13. Research on evaluation of degree of complexity of mining fault network based on GIS

    Energy Technology Data Exchange (ETDEWEB)

    Hua Zhang; Yun-jia Wang; Chuan-zhi Liu [China University of Mining and Technology, Jiangsu (China). School of Environment Science and Spatial Informatics

    2007-03-15

    A large number of spatial and attribute data are involved in coal resource evaluation. Databases are a relatively advanced data management technology, but their major defects are the poor graphic and spatial data functions, from which it is difficult to realize scientific management of evaluation data with spatial characteristics and evaluation result maps. On account of these deficiencies, the evaluation of degree of complexity of mining fault network based on a geographic information system (GIS) is proposed which integrates management of spatial and attribute data. A fractal is an index which can reflect the comprehensive information of faults' number, density, size, composition and dynamics mechanism. A fractal dimension is used as the quantitative evaluation index. Evaluation software has been developed based on a component GIS-MapX, with which the degree of complexity of fault network is evaluated quantitatively using the quantitative index of fractal dimensions in Liuqiao No.2 coal mine as an example. Results show that it is effective in acquiring model parameters and enhancing the definition of data and evaluation results with the application of GIS technology. The fault network is a system with fractal structure and its complexity can be described reasonably and accurately by fractal dimension, which provides an effective method for coal resource evaluation. 9 refs., 6 figs., 2 tabs.

  14. Collection evaluation in University libraries (II. Methods based on collection use

    Directory of Open Access Journals (Sweden)

    Àngels Massísimo i Sánchez de Boado

    2004-01-01

    Full Text Available This is our second paper devoted to the collection evaluation in the university libraries. Seven methods are described, based on collection use. Their advantages and disadvantages are discussed, as well as their usefulness for a range of library types

  15. The theory-based policy evaluation method applied to the ex-post evaluation of climate change policies in the built environment in the Netherlands

    International Nuclear Information System (INIS)

    Harmelink, Mirjam; Joosen, Suzanne; Blok, Kornelis

    2005-01-01

    The challenge within ex-post policy evaluation research is to unravel the whole policy process and evaluate the effect and effectiveness of the different steps. Through this unravelling of the policy implementation process, insight is gained on where something went wrong in the process of policy design and implementation and where the keys are for improving the effectiveness and efficiency. This article presents the results of an ex-post policy evaluation of the effect and effectiveness of the Energy Premium Regulation scheme and the Long Term Voluntary agreements to reduce CO 2 emissions in the built environment in the Netherlands applying the theory-based policy evaluation method. The article starts with a description of the theory-based policy evaluation method. The method begins with the formulation of a program theory, which describes the 'ideal' operation of a policy instrument, from the viewpoint of the policy makers. Thereupon the theory is checked and adapted through interviews with policy makers and executors, and the cause and effect chain is finally translated to (quantitative) indicators. The article shows that the theory-based evaluation method has benefits over other ex-post evaluation methods that include: The whole policy implementation process is evaluated and the focus is not just on the 'end-result' (i.e. efficiency improvement and CO 2 emission reduction). Through the development of indicators for each step in the implementation process, 'successes and failures' are quantified to the greatest possible extent. By applying this approach we not only learn whether policies are successful or not, but also why they succeeded or failed and how they can be improved

  16. Requirements for an evaluated nuclear data file for accelerator-based transmutation

    International Nuclear Information System (INIS)

    Koning, A.J.

    1993-06-01

    The importance of intermediate-energy nuclear data files as part of a global calculation scheme for accelerator-based transmutation of radioactive waste systems (for instance with an accelerator-driven subcritical reactor) is discussed. A proposal for three intermediate-energy data libraries for incident neutrons and protons is presented: - a data library from 0 to about 100 MeV (first priority), - a reference data library from 20 to 1500 MeV, - an activation/transmutation library from 0 to about 100 MeV. Furthermore, the proposed ENDF-6 structure of each library is given. The data needs for accelerator-based transmutation are translated in terms of the aforementioned intermediate-energy data libraries. This could be a starting point for an ''International Evaluated Nuclear Data File for Transmutation''. This library could also be of interest for other applications in science and technology. Finally, some conclusions and recommendations concerning future evaluation work are given. (orig.)

  17. HOW INTERNAL RISK - BASED AUDIT APPRAISES THE EVALUATION OF RISKS MANAGEMENT

    Directory of Open Access Journals (Sweden)

    N. Dorosh

    2017-09-01

    Full Text Available The article deals with the nature and function of the internal risk-based audit process approach to create patterns of risks and methods of evaluation. Deals with the relationship between the level of maturity of the risk of the company and the method of risk-based internal audit. it was emphasized that internal auditing provides an independent and objective opinion to an organization’s management as to whether its risks are being managed to acceptable levels.

  18. Challenges of teacher-based clinical evaluation from nursing students' point of view: Qualitative content analysis.

    Science.gov (United States)

    Sadeghi, Tabandeh; Seyed Bagheri, Seyed Hamid

    2017-01-01

    Clinical evaluation is very important in the educational system of nursing. One of the most common methods of clinical evaluation is evaluation by the teacher, but the challenges that students would face in this evaluation method, have not been mentioned. Thus, this study aimed to explore the experiences and views of nursing students about the challenges of teacher-based clinical evaluation. This study was a descriptive qualitative study with a qualitative content analysis approach. Data were gathered through semi-structured focused group sessions with undergraduate nursing students who were passing their 8 th semester at Rafsanjan University of Medical Sciences. Date were analyzed using Graneheim and Lundman's proposed method. Data collection and analysis were concurrent. According to the findings, "factitious evaluation" was the main theme of study that consisted of three categories: "Personal preferences," "unfairness" and "shirking responsibility." These categories are explained using quotes derived from the data. According to the results of this study, teacher-based clinical evaluation would lead to factitious evaluation. Thus, changing this approach of evaluation toward modern methods of evaluation is suggested. The finding can help nursing instructors to get a better understanding of the nursing students' point of view toward this evaluation approach and as a result could be planning for changing of this approach.

  19. Utility evaluations for Markov states of lung cancer for PET-based disease management

    International Nuclear Information System (INIS)

    Papatheofanis, F.J.

    2000-01-01

    Utilities for the health outcomes states (Markov states) of non-small cell lung carcinoma (NSCLCL) should be measured to evaluate management options for patients because patients are key participants in the process of care, and their assessment of diagnostic and therapeutic value in the options presented to them ultimately impacts their net health outcomes. This investigation sought to measure utilities for stage-dependent outcomes states of NSCLC. Persons (n=23) with suspected NSCLC based on physical findings and computed tomography completed a short utilities survey. Utility valuations were obtained according to severity of morbidity and varied considerably. Respondents rated these health states according to accuracy measures for 18 flurodeoxyglucose ( 18 FDG) positron emission tomography (PET) imaging and mediastinoscopy. The results demonstrate that stage-dependent morbidity is an important consideration for patients with NSCLC and should be included in any decision analysis regarding the evaluation or treatment of NSCLC. Respondents valued the quality of information obtained from non-invasive mediastinoscopy comparably. The utilities obtained from this investigation are useful in clinical decision-making based on Markov processes because they provide an initial estimation of utility assessment for 18 FDG-based diagnostic evaluation of lung cancer. Consequently, these utilities will be useful in future decision analyses that require patient preference in the assignment of the evaluation of decision options (branches)

  20. Community-based evaluation of PMTCT uptake in Nyanza Province, Kenya.

    Directory of Open Access Journals (Sweden)

    Pamela K Kohler

    Full Text Available Facility-based assessments of prevention of mother-to-child HIV transmission (PMTCT programs may overestimate population coverage. There are few community-based studies that evaluate PMTCT coverage and uptake.During 2011, a cross-sectional community survey among women who gave birth in the prior year was performed using the KEMRI-CDC Health and Demographic Surveillance System in Western Kenya. A random sample (n = 405 and a sample of women known to be HIV-positive through previous home-based testing (n = 247 were enrolled. Rates and correlates of uptake of antenatal care (ANC, HIV-testing, and antiretrovirals (ARVs were determined.Among 405 women in the random sample, 379 (94% reported accessing ANC, most of whom (87% were HIV tested. Uptake of HIV testing was associated with employment, higher socioeconomic status, and partner HIV testing. Among 247 known HIV-positive women, 173 (70% self-disclosed their HIV status. Among 216 self-reported HIV-positive women (including 43 from the random sample, 82% took PMTCT ARVs, with 54% completing the full antenatal, peripartum, and postpartum course. Maternal ARV use was associated with more ANC visits and having an HIV tested partner. ARV use during delivery was lowest (62% and associated with facility delivery. Eighty percent of HIV infected women reported having their infant HIV tested, 11% of whom reported their child was HIV infected, 76% uninfected, 6% declined to say, 7% did not recall; 79% of infected children were reportedly receiving HIV care and treatment.Community-based assessments provide data that complements clinic-based PMTCT evaluations. In this survey, antenatal HIV test uptake was high; most HIV infected women received ARVs, though many women did not self-disclose HIV status to field team. Community-driven strategies that encourage early ANC, partner involvement, and skilled delivery, and provide PMTCT education, may facilitate further reductions in vertical transmission.

  1. Evaluation of a fluorescence-based method for antibabesial drug screening.

    Science.gov (United States)

    Guswanto, Azirwan; Sivakumar, Thillaiampalam; Rizk, Mohamed Abdo; Elsayed, Shimaa Abd Elsalam; Youssef, Mohamed Ahmed; ElSaid, ElSaid El Shirbini; Yokoyama, Naoaki; Igarashi, Ikuo

    2014-08-01

    In vitro evaluation of chemotherapeutic agents against Babesia and Theileria parasites has become routine, and the effectiveness of these chemicals is usually determined by comparing the parasitemia dynamics of untreated and treated parasites. Although microscopy is widely used to calculate parasitemia, several disadvantages are associated with this technique. The present study evaluated a fluorescence-based method using SYBR green I stain (SG I) to screen antibabesial agents in in vitro cultures of Babesia bovis. The linearity between relative fluorescence units (RFU) and parasitemia was found to be well correlated with a 0.9944 goodness-of-fit (r(2)) value. Subsequently, 50% inhibitory concentration (IC50) values were calculated for 3 antiprotozoan agents, diminazene aceturate, nimbolide, and gedunin, by this method. For diminazene aceturate and nimbolide, the IC(50)s determined by the fluorescence-based method (408 nM and 8.13 μM, respectively) and microscopy (400.3 nM and 9.4 μM, respectively) were in agreement. Furthermore, the IC50 of gedunin determined by the fluorescence-based method (19 μM) was similar to the recently described microscopy-based value (21.7 μM) for B. bovis. Additionally, the Z' factor (0.80 to 0.90), signal-to-noise (S/N) ratio (44.15 to 87.64), coefficient of variation at the maximum signal (%CVmax) (0.50 to 2.85), and coefficient of variation at the minimum signal (%CVmin) (1.23 to 2.21) calculated for the fluorescence method using diminazene aceturate were comparable to those previously determined in malaria research for this assay. These findings suggest that the fluorescence-based method might be useful for antibabesial drug screening and may have potential to be developed into a high-throughput screening (HTS) assay. Copyright © 2014, American Society for Microbiology. All Rights Reserved.

  2. A shape-based quality evaluation and reconstruction method for electrical impedance tomography.

    Science.gov (United States)

    Antink, Christoph Hoog; Pikkemaat, Robert; Malmivuo, Jaakko; Leonhardt, Steffen

    2015-06-01

    Linear methods of reconstruction play an important role in medical electrical impedance tomography (EIT) and there is a wide variety of algorithms based on several assumptions. With the Graz consensus reconstruction algorithm for EIT (GREIT), a novel linear reconstruction algorithm as well as a standardized framework for evaluating and comparing methods of reconstruction were introduced that found widespread acceptance in the community. In this paper, we propose a two-sided extension of this concept by first introducing a novel method of evaluation. Instead of being based on point-shaped resistivity distributions, we use 2759 pairs of real lung shapes for evaluation that were automatically segmented from human CT data. Necessarily, the figures of merit defined in GREIT were adjusted. Second, a linear method of reconstruction that uses orthonormal eigenimages as training data and a tunable desired point spread function are proposed. Using our novel method of evaluation, this approach is compared to the classical point-shaped approach. Results show that most figures of merit improve with the use of eigenimages as training data. Moreover, the possibility of tuning the reconstruction by modifying the desired point spread function is shown. Finally, the reconstruction of real EIT data shows that higher contrasts and fewer artifacts can be achieved in ventilation- and perfusion-related images.

  3. A shape-based quality evaluation and reconstruction method for electrical impedance tomography

    International Nuclear Information System (INIS)

    Antink, Christoph Hoog; Pikkemaat, Robert; Leonhardt, Steffen; Malmivuo, Jaakko

    2015-01-01

    Linear methods of reconstruction play an important role in medical electrical impedance tomography (EIT) and there is a wide variety of algorithms based on several assumptions. With the Graz consensus reconstruction algorithm for EIT (GREIT), a novel linear reconstruction algorithm as well as a standardized framework for evaluating and comparing methods of reconstruction were introduced that found widespread acceptance in the community.In this paper, we propose a two-sided extension of this concept by first introducing a novel method of evaluation. Instead of being based on point-shaped resistivity distributions, we use 2759 pairs of real lung shapes for evaluation that were automatically segmented from human CT data. Necessarily, the figures of merit defined in GREIT were adjusted. Second, a linear method of reconstruction that uses orthonormal eigenimages as training data and a tunable desired point spread function are proposed.Using our novel method of evaluation, this approach is compared to the classical point-shaped approach. Results show that most figures of merit improve with the use of eigenimages as training data. Moreover, the possibility of tuning the reconstruction by modifying the desired point spread function is shown. Finally, the reconstruction of real EIT data shows that higher contrasts and fewer artifacts can be achieved in ventilation- and perfusion-related images. (paper)

  4. Making the Grade: Using Instructional Feedback and Evaluation to Inspire Evidence-Based Teaching.

    Science.gov (United States)

    Brickman, Peggy; Gormally, Cara; Martella, Amedee Marchand

    2016-01-01

    Typically, faculty receive feedback about teaching via two mechanisms: end-of-semester student evaluations and peer observation. However, instructors require more sustained encouragement and constructive feedback when implementing evidence-based teaching practices. Our study goal was to characterize the landscape of current instructional-feedback practices in biology and uncover faculty perceptions about these practices. Findings from a national survey of 400 college biology faculty reveal an overwhelming dissatisfaction with student evaluations, regardless of self-reported teaching practices, institution type, or position. Faculty view peer evaluations as most valuable, but less than half of faculty at doctoral-granting institutions report participating in peer evaluation. When peer evaluations are performed, they are more supportive of evidence-based teaching than student evaluations. Our findings reveal a large, unmet desire for greater guidance and assessment data to inform pedagogical decision making. Informed by these findings, we discuss alternate faculty-vetted feedback strategies for providing formative instructional feedback. © 2016 P. Brickman et al. CBE—Life Sciences Education © 2016 The American Society for Cell Biology. This article is distributed by The American Society for Cell Biology under license from the author(s). It is available to the public under an Attribution–Noncommercial–Share Alike 3.0 Unported Creative Commons License (http://creativecommons.org/licenses/by-nc-sa/3.0).

  5. The Usability Evaluation of Fakih Method Based on Technology for Students with Hearing Difficulties: The User's Retrospective

    Science.gov (United States)

    Sabdan, Muhammad Sayuti Bin; Alias, Norlidah; Jomhari, Nazean; Jamaludin, Khairul Azhar; DeWitt, Dorothy

    2014-01-01

    The study is aimed at evaluating the FAKIH method based on technology in teaching al-Quran, based on the user's retrospective. The participants of this study were five students selected based on hearing difficulties. The study employed the user evaluation framework. Teacher's journals were used to determine the frequency and percentage of…

  6. Oak Ridge National Laboratory Embrittlement Data Base (EDB) and Dosimetry Evaluation (DE) program

    International Nuclear Information System (INIS)

    Pace, J.V. III; Remec, I.; Wang, J.A.; White, J.E.

    1996-01-01

    The objective of this program is to develop, maintain, and upgrade computerized data bases, calculational procedures, and standards relating to reactor pressure vessel fluence spectra determinations and embrittlement assessments. As part of this program, the information from radiation embrittlement research on nuclear reactor pressure vessel steels and from power reactor surveillance reports is maintained in a data base published on a periodic basis. The Embrittlement Data Base (EDB) effort consists of verifying the quality of the EDB, providing user-friendly software to access and process the data, and exploring and assessing embrittlement prediction models. The Dosimetry Evaluation effort consists of maintaining and upgrading validated neutron and gamma radiation transport procedures, maintaining cross-section libraries with the latest evaluated nuclear data, and maintaining and updating validated dosimetry procedures and data bases. The information available from this program provides data for assisting the Office of Nuclear Reactor Regulation, with support from the Office of Nuclear Regulatory Research, to effectively monitor current procedures and data bases used by vendors, utilities, and service laboratories in the pressure vessel irradiation surveillance program

  7. Evaluation and decision of products conceptual design schemes based on customer requirements

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Hong Zhong; Li, Yan Feng; Liu, Yu; Wang, Zhonglai [University of Electronic Science and Technology of China, Sichuan (China); Liu, Wenhai [2China Science Patent Trademark Agents Ltd., Beijing (China)

    2011-09-15

    Within the competitive market environment, understanding customer requirements is crucial for all corporations to obtain market share and survive competition. Only the products exactly meeting customer requirements can win in the market place. Therefore, customer requirements play a very important role in the evaluation and decision process of conceptual design schemes of products. In this paper, an evaluation and decision method based on customer requirements is presented. It utilizes the importance of customer requirements, the satisfaction degree of each evaluation metric to the specification, and an evaluation metric which models customer requirements to evaluate the satisfaction degree of each design scheme to specific customer requirements via the proposed BP neural networks. In the evaluation and decision process, fuzzy sets are used to describe the importance of customer requirements, the relationship between customer requirements and evaluation metrics, the satisfaction degree of each scheme to customer requirements, and the crisp set is used to describe the satisfaction degree of each metric to specifications. The effectiveness of the proposed method is demonstrated by an example of front suspension fork design of mountain bikes.

  8. Evaluation and decision of products conceptual design schemes based on customer requirements

    International Nuclear Information System (INIS)

    Huang, Hong Zhong; Li, Yan Feng; Liu, Yu; Wang, Zhonglai; Liu, Wenhai

    2011-01-01

    Within the competitive market environment, understanding customer requirements is crucial for all corporations to obtain market share and survive competition. Only the products exactly meeting customer requirements can win in the market place. Therefore, customer requirements play a very important role in the evaluation and decision process of conceptual design schemes of products. In this paper, an evaluation and decision method based on customer requirements is presented. It utilizes the importance of customer requirements, the satisfaction degree of each evaluation metric to the specification, and an evaluation metric which models customer requirements to evaluate the satisfaction degree of each design scheme to specific customer requirements via the proposed BP neural networks. In the evaluation and decision process, fuzzy sets are used to describe the importance of customer requirements, the relationship between customer requirements and evaluation metrics, the satisfaction degree of each scheme to customer requirements, and the crisp set is used to describe the satisfaction degree of each metric to specifications. The effectiveness of the proposed method is demonstrated by an example of front suspension fork design of mountain bikes

  9. Evidence-based evaluation of treatment strategy for multiple sclerosis

    Directory of Open Access Journals (Sweden)

    LI Meng-qiu

    2012-04-01

    Full Text Available Objective To formulate the best treatment plan for multiple sclerosis (MS patients by evaluating the therapeutic efficacy and side effect of various evidence-based programs. Methods Key words were defined as multiple sclerosis, immunomodulatory therapy and therapy, etc. We searched MEDLINE, Cochrane Library, Wanfang data bases for Scientific Journals in China and National Knowledge Infrastructure for Chinese Scientific Journals Database. Additionally, we applied manual searching and screened out conference paper and academic dissertation, etc, from various references. After that we obtained and evaluated by Jadad scales on systematic reviews, randomized controlled trials, controlled clinical trials and observational study cases about glucocorticoids, plasmapheresis, intravenous immunoglobulin, IFN-β, glatiramer acetate, mitoxantrone, natalizumab, fingolimod. Results After screening, all seventeen selected resources included systematic reviews 6 articles, randomized controlled trials 7 articles, controlled clinical trials 2 articles, observational study cases 2 articles, among which fifteen articles were proved to be high quality (according to Jadad scoring system, five score 4, six score 5, four score 7, two chapters were judged to be low quality scoring 3. Finally, we summerize that: 1 The first choice of treatment for acute relapses is glucocorticoids and we suggest that plasmapheresis or intravenous immunoglobulin may be tried as an alternative therapy in acute MS relapse, especially in case of contraindications to intravenous methylprednisolone. 2 Immunomodulatory or immunosuppressive treatment (IFN-β, glatiramer acetate, mitoxantrone, natalizumab can be an option to prevent new relapses and progression of disability. 3 Fingolimod is an oral treatment for multiple sclerosis to improve treatment adherence. Conclusion Using evidence-based medicine methods can provide us best clinical evidence on MS treatment.

  10. An Energy Efficiency Evaluation Method Based on Energy Baseline for Chemical Industry

    OpenAIRE

    Yao, Dong-mei; Zhang, Xin; Wang, Ke-feng; Zou, Tao; Wang, Dong; Qian, Xin-hua

    2016-01-01

    According to the requirements and structure of ISO 50001 energy management system, this study proposes an energy efficiency evaluation method based on energy baseline for chemical industry. Using this method, the energy plan implementation effect in the processes of chemical production can be evaluated quantitatively, and evidences for system fault diagnosis can be provided. This method establishes the energy baseline models which can meet the demand of the different kinds of production proce...

  11. Performance Evaluation and Optimal Management of Distance-Based Registration Using a Semi-Markov Process

    Directory of Open Access Journals (Sweden)

    Jae Joon Suh

    2017-01-01

    Full Text Available We consider the distance-based registration (DBR which is a kind of dynamic location registration scheme in a mobile communication network. In the DBR, the location of a mobile station (MS is updated when it enters a base station more than or equal to a specified distance away from the base station where the location registration for the MS was done last. In this study, we first investigate the existing performance-evaluation methods on the DBR with implicit registration (DBIR presented to improve the performance of the DBR and point out some problems of the evaluation methods. We propose a new performance-evaluation method for the DBIR scheme using a semi-Markov process (SMP which can resolve the controversial issues of the existing methods. The numerical results obtained with the proposed SMP model are compared with those from previous models. It is shown that the SMP model should be considered to get an accurate performance of the DBIR scheme.

  12. Evaluation Methods for Assessing Users' Psychological Experiences of Web-Based Psychosocial Interventions: A Systematic Review.

    Science.gov (United States)

    Feather, Jacqueline Susan; Howson, Moira; Ritchie, Linda; Carter, Philip D; Parry, David Tudor; Koziol-McLain, Jane

    2016-06-30

    The use of Web-based interventions to deliver mental health and behavior change programs is increasingly popular. They are cost-effective, accessible, and generally effective. Often these interventions concern psychologically sensitive and challenging issues, such as depression or anxiety. The process by which a person receives and experiences therapy is important to understanding therapeutic process and outcomes. While the experience of the patient or client in traditional face-to-face therapy has been evaluated in a number of ways, there appeared to be a gap in the evaluation of patient experiences of therapeutic interventions delivered online. Evaluation of Web-based artifacts has focused either on evaluation of experience from a computer Web-design perspective through usability testing or on evaluation of treatment effectiveness. Neither of these methods focuses on the psychological experience of the person while engaged in the therapeutic process. This study aimed to investigate what methods, if any, have been used to evaluate the in situ psychological experience of users of Web-based self-help psychosocial interventions. A systematic literature review was undertaken of interdisciplinary databases with a focus on health and computer sciences. Studies that met a predetermined search protocol were included. Among 21 studies identified that examined psychological experience of the user, only 1 study collected user experience in situ. The most common method of understanding users' experience was through semistructured interviews conducted posttreatment or questionnaires administrated at the end of an intervention session. The questionnaires were usually based on standardized tools used to assess user experience with traditional face-to-face treatment. There is a lack of methods specified in the literature to evaluate the interface between Web-based mental health or behavior change artifacts and users. Main limitations in the research were the nascency of the topic

  13. Evaluation Methods for Assessing Users’ Psychological Experiences of Web-Based Psychosocial Interventions: A Systematic Review

    Science.gov (United States)

    Howson, Moira; Ritchie, Linda; Carter, Philip D; Parry, David Tudor; Koziol-McLain, Jane

    2016-01-01

    Background The use of Web-based interventions to deliver mental health and behavior change programs is increasingly popular. They are cost-effective, accessible, and generally effective. Often these interventions concern psychologically sensitive and challenging issues, such as depression or anxiety. The process by which a person receives and experiences therapy is important to understanding therapeutic process and outcomes. While the experience of the patient or client in traditional face-to-face therapy has been evaluated in a number of ways, there appeared to be a gap in the evaluation of patient experiences of therapeutic interventions delivered online. Evaluation of Web-based artifacts has focused either on evaluation of experience from a computer Web-design perspective through usability testing or on evaluation of treatment effectiveness. Neither of these methods focuses on the psychological experience of the person while engaged in the therapeutic process. Objective This study aimed to investigate what methods, if any, have been used to evaluate the in situ psychological experience of users of Web-based self-help psychosocial interventions. Methods A systematic literature review was undertaken of interdisciplinary databases with a focus on health and computer sciences. Studies that met a predetermined search protocol were included. Results Among 21 studies identified that examined psychological experience of the user, only 1 study collected user experience in situ. The most common method of understanding users’ experience was through semistructured interviews conducted posttreatment or questionnaires administrated at the end of an intervention session. The questionnaires were usually based on standardized tools used to assess user experience with traditional face-to-face treatment. Conclusions There is a lack of methods specified in the literature to evaluate the interface between Web-based mental health or behavior change artifacts and users. Main

  14. Data Fusion Based on Node Trust Evaluation in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Zhou Jianming

    2014-01-01

    Full Text Available Abnormal behavior detection and trust evaluation mode of traditional sensor node have a single function without considering all the factors, and the trust value algorithm is relatively complicated. To avoid these above disadvantages, a trust evaluation model based on the autonomous behavior of sensor node is proposed in this paper. Each sensor node has the monitoring privilege and obligation. Neighboring sensor nodes can monitor each other. Their direct and indirect trust values can be achieved by using a relatively simple calculation method, the synthesis trust value of which could be got according to the composition rule of D-S evidence theory. Firstly, the cluster head assigns different weighted value for the data from each sensor node, then the weight vector is set according to the synthesis trust value, the data fusion processing is executed, and finally the cluster head sensor node transmits the fused result to the base station. Simulation experiment results demonstrate that the trust evaluation model can rapidly, exactly, and effectively recognize malicious sensor node and avoid malicious sensor node becoming cluster head sensor node. The proposed algorithm can greatly increase the safety and accuracy of data fusion, improve communication efficiency, save energy of sensor node, suit different application fields, and deploy environments.

  15. Standardized evaluation of algorithms for computer-aided diagnosis of dementia based on structural MRI

    DEFF Research Database (Denmark)

    Bron, Esther E.; Smits, Marion; van der Flier, Wiesje M.

    2015-01-01

    algorithms based on a clinically representative multi-center data set. Using clinical practice as the starting point, the goal was to reproduce the clinical diagnosis. Therefore, we evaluated algorithms for multi-class classification of three diagnostic groups: patients with probable Alzheimer's disease...... of aging). The best performing algorithm yielded an accuracy of 63.0% and an area under the receiver-operating-characteristic curve (AUC) of 78.8%. In general, the best performances were achieved using feature extraction based on voxel-based morphometry or a combination of features that included volume......Abstract Algorithms for computer-aided diagnosis of dementia based on structural MRI have demonstrated high performance in the literature, but are difficult to compare as different data sets and methodology were used for evaluation. In addition, it is unclear how the algorithms would perform...

  16. Evaluation of Computer-Based Procedure System Prototype

    Energy Technology Data Exchange (ETDEWEB)

    Johanna Oxstrand; Katya Le Blanc; Seth Hays

    2012-09-01

    relevant for the task and situation at hand, which has potential consequences of taking up valuable time when operators must be responding to the situation, and potentially leading operators down an incorrect response path. Other challenges related to PBPs are the management of multiple procedures, place-keeping, finding the correct procedure for the task at hand, and relying on other sources of additional information to ensure a functional and accurate understanding of the current plant status (Converse, 1995; Fink, Killian, Hanes, & Naser, 2009; Le Blanc & Oxstrand, 2012). The main focus of this report is to describe the research activities conducted to address the remaining two objectives; Develop a prototype CBP system based on requirements identified and Evaluate the CBP prototype. The emphasis will be on the evaluation of an initial CBP prototype in at a Nuclear Power Plant.

  17. Uncertainty and conservatism in safety evaluations based on a BEPU approach

    International Nuclear Information System (INIS)

    Yamaguchi, A.; Mizokami, S.; Kudo, Y.; Hotta, A.

    2009-01-01

    Atomic Energy Society of Japan has published 'Standard Method for Safety Evaluation using Best Estimate Code Based on Uncertainty and Scaling Analyses with Statistical Approach' to be applied to accidents and AOOs in the safety evaluation of LWRs. In this method, hereafter named as the AESJ-SSE (Statistical Safety Evaluation) method, identification and quantification of uncertainties will be performed and then a combination of the best estimate code and the evaluation of uncertainty propagation will be performed. Uncertainties are categorized into bias and variability. In general, bias is related to our state-of-knowledge on uncertainty objects (modeling, scaling, input data, etc.) while variability reflects stochastic features involved in these objects. Considering many kinds of uncertainties in thermal-hydraulics models and experimental databases show variabilities that will be strongly influenced by our state of knowledge, it seems reasonable that these variabilities are also related to state-of-knowledge. The design basis events (DBEs) that are employed for licensing analyses form a main part of the given or prior conservatism. The regulatory acceptance criterion is also regarded as the prior conservatism. In addition to these prior conservatisms, a certain amount of the posterior conservatism is added with maintaining intimate relationships with state-of-knowledge. In the AESJ-SSE method, this posterior conservatism can be incorporated into the safety evaluation in a combination of the following three ways, (1) broadening ranges of variability relevant to uncertainty objects, (2) employing more disadvantageous biases relevant to uncertainty objects and (3) adding an extra bias to the safety evaluation results. Knowing implemented quantitative bases of uncertainties and conservatism, the AESJ-SSE method provides a useful ground for rational decision-making. In order to seek for 'the best estimation' as well as reasonably setting the analytical margin, a degree

  18. WASTE REDUCTION EVALUATION OF SOY-BASED INK AT A SHEET-FED OFFSET PRINTER

    Science.gov (United States)

    This Waste Reduction Innovative Technology Evaluation (WRITE) project quantifies and compares wastes generated from the use of soy-based and petroleum-based inks in sheet-fed offset printing. Data were collected in a full-scale print run on a Miller TP104 Plus 6-color press in Ju...

  19. It's Your Place: Development and Evaluation of an Evidence-Based Bystander Intervention Campaign.

    Science.gov (United States)

    Sundstrom, Beth; Ferrara, Merissa; DeMaria, Andrea L; Gabel, Colby; Booth, Kathleen; Cabot, Jeri

    2017-06-28

    Preventing sexual assault on college campuses is a national priority. Bystander intervention offers a promising approach to change social norms and prevent sexual misconduct. This study presents the implementation and evaluation of a theory-based campaign to promote active bystander intervention. The theory of planned behavior (TPB) served as a conceptual framework throughout campaign development and evaluation. Formative research published elsewhere was used to develop campaign strategies, communication channels, and messages, including "It is your place to prevent sexual assault: You're not ruining a good time." The It's Your Place multi-media campaign fosters a culture of bystander intervention through peer-to-peer facilitation and training, as well as traditional and new media platforms. A cross-sectional post-test only web-based survey was designed to evaluate the campaign and test the TPB's ability to accurately predict intention to intervene. Survey data were collected from 1,505 currently enrolled students. The TPB model predicted intention to intervene. There was a significant effect of campaign exposure on attitude, subjective norms, and perceived behavioral intention. This theory-based communication campaign offers implications for promoting active bystander intervention and reducing sexual assault.

  20. Development and Performance Evaluation of Image-Based Robotic Waxing System for Detailing Automobiles.

    Science.gov (United States)

    Lin, Chi-Ying; Hsu, Bing-Cheng

    2018-05-14

    Waxing is an important aspect of automobile detailing, aimed at protecting the finish of the car and preventing rust. At present, this delicate work is conducted manually due to the need for iterative adjustments to achieve acceptable quality. This paper presents a robotic waxing system in which surface images are used to evaluate the quality of the finish. An RGB-D camera is used to build a point cloud that details the sheet metal components to enable path planning for a robot manipulator. The robot is equipped with a multi-axis force sensor to measure and control the forces involved in the application and buffing of wax. Images of sheet metal components that were waxed by experienced car detailers were analyzed using image processing algorithms. A Gaussian distribution function and its parameterized values were obtained from the images for use as a performance criterion in evaluating the quality of surfaces prepared by the robotic waxing system. Waxing force and dwell time were optimized using a mathematical model based on the image-based criterion used to measure waxing performance. Experimental results demonstrate the feasibility of the proposed robotic waxing system and image-based performance evaluation scheme.

  1. From extended integrity monitoring to the safety evaluation of satellite-based localisation system

    International Nuclear Information System (INIS)

    Legrand, Cyril; Beugin, Julie; Marais, Juliette; Conrard, Blaise; El-Koursi, El-Miloudi; Berbineau, Marion

    2016-01-01

    Global Navigation Satellite Systems (GNSS) such as GPS, already used in aeronautics for safety-related applications, can play a major role in railway safety by allowing a train to locate itself safely. However, in order to implement this positioning solution in any embedded system, its performances must be evaluated according to railway standards. The evaluation of GNSS performances is not based on the same attributes class than RAMS evaluation. Face to these diffculties, we propose to express the integrity attribute, performance of satellite-based localisation. This attribute comes from aeronautical standards and for a hybridised GNSS with inertial system. To achieve this objective, the integrity attribute must be extended to this kind of system and algorithms initially devoted to GNSS integrity monitoring only must be adapted. Thereafter, the formalisation of this integrity attribute permits us to analyse the safety quantitatively through the probabilities of integrity risk and wrong-side failure. In this paper, after an introductory discussion about the use of localisation systems in railway safety context together with integrity issues, a particular integrity monitoring is proposed and described. The detection events of this algorithm permit us to conclude about safety level of satellite-based localisation system.

  2. Using mobile and web-based computerized tests to evaluate university students

    NARCIS (Netherlands)

    Romero, C.; Ventura, S.; De Bra, P.M.E.

    2009-01-01

    Mobile learning and testing is emerging as a potential educational environment. In this article we evaluate the use of mobile devices for testing as compared to web-based assessment systems. We also describe an authoring tool to develop adaptable and adaptive computerized tests that can be executed

  3. The Domain Five Observation Instrument: A Competency-Based Coach Evaluation Tool

    Science.gov (United States)

    Shangraw, Rebecca

    2017-01-01

    The Domain Five Observation Instrument (DFOI) is a competency-based observation instrument recommended for sport leaders or researchers who wish to evaluate coaches' instructional behaviors. The DFOI includes 10 behavior categories and four timed categories that encompass 34 observable instructional benchmarks outlined in domain five of the…

  4. Research on evaluation of enterprise project culture based on Denison model

    Directory of Open Access Journals (Sweden)

    Yucheng Zeng

    2015-05-01

    Full Text Available Purpose: The purpose of this paper is to build enterprise project culture evaluation model and search for the best evaluation method for Chinese enterprise project culture on the basis of studying and drawing lessons from enterprise culture evaluation theory and method at home and abroad. Design/methodology/approach: Referring to the Denison enterprise culture evaluation model, this paper optimizes it according to the difference of enterprise project culture, designs the enterprise project culture evaluation model and proves the practicability of the model through empirical. Finding: This paper finds that it`s more applicable to use the Denison model for enterprise project culture evaluation through the comparative analysis of domestic and foreign enterprise culture evaluation theory and method, the systematic project culture management framework of Chinese enterprises has not yet formed through empirical research, and four factors in enterprise project culture have important influence on project operation performance improvement. Research limitations/implications: The research on evaluation of enterprise project culture based on Denison model is a preliminary attempt, the design of evaluation index system, evaluation model and scale structure also need to be improved, but the thinking of this paper in this field provides a valuable reference for future research. Practical Implications: This paper provides the support of theory and practice for evaluating the present situation of enterprise project culture construction and analyzing the advantages and disadvantages of project culture, which contributes to the "dialectical therapy" of enterprise project management, enterprise management and enterprise project culture construction. Originality/value: The main contribution of this paper is the introduction of Denison enterprise culture model. Combining with the actual situation of enterprises, this paper also builds the evaluation model for

  5. ERP System Evaluation on SOFI XP Based Accounting Module in Software House Industry

    Directory of Open Access Journals (Sweden)

    Shinta Mardallena

    2015-09-01

    Full Text Available Accounting module is an important module for a company business process. The roles are in the form of parameter calculation of profits, losses and financial performance based on transaction, which basically is a real-time reporting system. The amount of company needs on accounting indicates that the accounting is one of the resources which support the establishment of a company. Thus, the company constantly improves the accounting performance, especially in handling of receivables, debts, and cash transactions. Evaluations which were performed at SOFI XP-based ERP system aims to provide a solution to a problem that was discovered during the analysis of the system needs. This evaluation was done in two stages: by collecting data and analyzing the system that running in the company. By doing this evaluation, the documentation of system performance and the solution for problems that were found in the company can be generated.

  6. Reliability-Based and Cost-Oriented Product Optimization Integrating Fuzzy Reasoning Petri Nets, Interval Expert Evaluation and Cultural-Based DMOPSO Using Crowding Distance Sorting

    Directory of Open Access Journals (Sweden)

    Zhaoxi Hong

    2017-08-01

    Full Text Available In reliability-based and cost-oriented product optimization, the target product reliability is apportioned to subsystems or components to achieve the maximum reliability and minimum cost. Main challenges to conducting such optimization design lie in how to simultaneously consider subsystem division, uncertain evaluation provided by experts for essential factors, and dynamic propagation of product failure. To overcome these problems, a reliability-based and cost-oriented product optimization method integrating fuzzy reasoning Petri net (FRPN, interval expert evaluation and cultural-based dynamic multi-objective particle swarm optimization (DMOPSO using crowding distance sorting is proposed in this paper. Subsystem division is performed based on failure decoupling, and then subsystem weights are calculated with FRPN reflecting dynamic and uncertain failure propagation, as well as interval expert evaluation considering six essential factors. A mathematical model of reliability-based and cost-oriented product optimization is established, and the cultural-based DMOPSO with crowding distance sorting is utilized to obtain the optimized design scheme. The efficiency and effectiveness of the proposed method are demonstrated by the numerical example of the optimization design for a computer numerically controlled (CNC machine tool.

  7. Towards Reliable Evaluation of Anomaly-Based Intrusion Detection Performance

    Science.gov (United States)

    Viswanathan, Arun

    2012-01-01

    This report describes the results of research into the effects of environment-induced noise on the evaluation process for anomaly detectors in the cyber security domain. This research was conducted during a 10-week summer internship program from the 19th of August, 2012 to the 23rd of August, 2012 at the Jet Propulsion Laboratory in Pasadena, California. The research performed lies within the larger context of the Los Angeles Department of Water and Power (LADWP) Smart Grid cyber security project, a Department of Energy (DoE) funded effort involving the Jet Propulsion Laboratory, California Institute of Technology and the University of Southern California/ Information Sciences Institute. The results of the present effort constitute an important contribution towards building more rigorous evaluation paradigms for anomaly-based intrusion detectors in complex cyber physical systems such as the Smart Grid. Anomaly detection is a key strategy for cyber intrusion detection and operates by identifying deviations from profiles of nominal behavior and are thus conceptually appealing for detecting "novel" attacks. Evaluating the performance of such a detector requires assessing: (a) how well it captures the model of nominal behavior, and (b) how well it detects attacks (deviations from normality). Current evaluation methods produce results that give insufficient insight into the operation of a detector, inevitably resulting in a significantly poor characterization of a detectors performance. In this work, we first describe a preliminary taxonomy of key evaluation constructs that are necessary for establishing rigor in the evaluation regime of an anomaly detector. We then focus on clarifying the impact of the operational environment on the manifestation of attacks in monitored data. We show how dynamic and evolving environments can introduce high variability into the data stream perturbing detector performance. Prior research has focused on understanding the impact of this

  8. Immunity-based detection, identification, and evaluation of aircraft sub-system failures

    Science.gov (United States)

    Moncayo, Hever Y.

    This thesis describes the design, development, and flight-simulation testing of an integrated Artificial Immune System (AIS) for detection, identification, and evaluation of a wide variety of sensor, actuator, propulsion, and structural failures/damages including the prediction of the achievable states and other limitations on performance and handling qualities. The AIS scheme achieves high detection rate and low number of false alarms for all the failure categories considered. Data collected using a motion-based flight simulator are used to define the self for an extended sub-region of the flight envelope. The NASA IFCS F-15 research aircraft model is used and represents a supersonic fighter which include model following adaptive control laws based on non-linear dynamic inversion and artificial neural network augmentation. The flight simulation tests are designed to analyze and demonstrate the performance of the immunity-based aircraft failure detection, identification and evaluation (FDIE) scheme. A general robustness analysis is also presented by determining the achievable limits for a desired performance in the presence of atmospheric perturbations. For the purpose of this work, the integrated AIS scheme is implemented based on three main components. The first component performs the detection when one of the considered failures is present in the system. The second component consists in the identification of the failure category and the classification according to the failed element. During the third phase a general evaluation of the failure is performed with the estimation of the magnitude/severity of the failure and the prediction of its effect on reducing the flight envelope of the aircraft system. Solutions and alternatives to specific design issues of the AIS scheme, such as data clustering and empty space optimization, data fusion and duplication removal, definition of features, dimensionality reduction, and selection of cluster/detector shape are also

  9. Model-Based Approach to the Evaluation of Task Complexity in Nuclear Power Plant

    International Nuclear Information System (INIS)

    Ham, Dong Han

    2007-02-01

    This study developed a model-based method for evaluating task complexity and examined the ways of evaluating the complexity of tasks designed for abnormal situations and daily task situations in NPPs. The main results of this study can be summarised as follows. First, this study developed a conceptual framework for studying complexity factors and a model of complexity factors that classifies complexity factors according to the types of knowledge that human operators use. Second, this study developed a more practical model of task complexity factors and identified twenty-one complexity factors based on the model. The model emphasizes that a task is a system to be designed and its complexity has several dimensions. Third, we developed a method of identifying task complexity factors and evaluating task complexity qualitatively based on the developed model of task complexity factors. This method can be widely used in various task situations. Fourth, this study examined the applicability of TACOM to abnormal situations and daily task situations, such as maintenance and confirmed that it can be reasonably used in those situations. Fifth, we developed application examples to demonstrate the use of the theoretical results of this study. Lastly, this study reinterpreted well-know principles for designing information displays in NPPs in terms of task complexity and suggested a way of evaluating the conceptual design of displays in an analytical way by using the concept of task complexity. All of the results of this study will be used as a basis when evaluating the complexity of tasks designed on procedures or information displays and designing ways of improving human performance in NPPs

  10. Credit risk evaluation based on social media.

    Science.gov (United States)

    Yang, Yang; Gu, Jing; Zhou, Zongfang

    2016-07-01

    Social media has been playing an increasingly important role in the sharing of individuals' opinions on many financial issues, including credit risk in investment decisions. This paper analyzes whether these opinions, which are transmitted through social media, can accurately predict enterprises' future credit risk. We consider financial statements oriented evaluation results based on logit and probit approaches as the benchmarks. We then conduct textual analysis to retrieve both posts and their corresponding commentaries published on two of the most popular social media platforms for financial investors in China. Professional advice from financial analysts is also investigated in this paper. We surprisingly find that the opinions extracted from both posts and commentaries surpass opinions of analysts in terms of credit risk prediction. Copyright © 2015 Elsevier Inc. All rights reserved.

  11. Analytical Evaluation of Chunk-Based Tractable Multi-cell OFDMA system

    Directory of Open Access Journals (Sweden)

    P.Kavitha

    2018-04-01

    Full Text Available This paper evaluates thoroughly the performance of multi-cell OFDMA system. The two types of deployment in multi-cell OFDMA system, such as Strict Fractional Frequency Reuse (FFR and Soft FFR (SFR were evaluated. In order to model the base station locations, homogeneous Poisson point processes were used, i.e. tractable model instead of hexagonal grid was considered. In order to reduce complexity, chunk-based resource allocation scheme was embedded. Each cell divides the users into the users of the central cell area and the users of the cell edge area according to their average received Signal to Interference and Noise Ratio (SINR compared with FFR threshold. The primary stage of the analysis includes the spectral efficiency’s expression deriving from these two deployment scenarios, followed by the analysis with the use of coverage probability. However, the improvement of spectral efficiency is achieved in the case of SFR. On the contrary, coverage probability is far improved by using strict FFR scheme. Through numerical anaysis, We have shown that the optimal FFR threshold to achieve the highest spectral efficiency was 12 dB for both Strict FFR as well as SFR.

  12. Comparison of SOAP and REST Based Web Services Using Software Evaluation Metrics

    Directory of Open Access Journals (Sweden)

    Tihomirovs Juris

    2016-12-01

    Full Text Available The usage of Web services has recently increased. Therefore, it is important to select right type of Web services at the project design stage. The most common implementations are based on SOAP (Simple Object Access Protocol and REST (Representational State Transfer Protocol styles. Maintainability of REST and SOAP Web services has become an important issue as popularity of Web services is increasing. Choice of the right approach is not an easy decision since it is influenced by development requirements and maintenance considerations. In the present research, we present the comparison of SOAP and REST based Web services using software evaluation metrics. To achieve this aim, a systematic literature review will be made to compare REST and SOAP Web services in terms of the software evaluation metrics.

  13. Development of web-based user interface for evaluated covariance data files

    International Nuclear Information System (INIS)

    Togashi, Tomoaki; Kato, Kiyoshi; Suzuki, Ryusuke; Otuka, Naohiko

    2010-01-01

    We develop a web-based interface which visualizes cross sections with their covariance compiled in the ENDF format in order to support evaluated covariance data users who do not have experience of NJOY calculation. A package of programs has been constructed without aid of any existing program libraries. (author)

  14. A planning quality evaluation tool for prostate adaptive IMRT based on machine learning

    International Nuclear Information System (INIS)

    Zhu Xiaofeng; Ge Yaorong; Li Taoran; Thongphiew, Danthai; Yin Fangfang; Wu, Q Jackie

    2011-01-01

    Purpose: To ensure plan quality for adaptive IMRT of the prostate, we developed a quantitative evaluation tool using a machine learning approach. This tool generates dose volume histograms (DVHs) of organs-at-risk (OARs) based on prior plans as a reference, to be compared with the adaptive plan derived from fluence map deformation. Methods: Under the same configuration using seven-field 15 MV photon beams, DVHs of OARs (bladder and rectum) were estimated based on anatomical information of the patient and a model learned from a database of high quality prior plans. In this study, the anatomical information was characterized by the organ volumes and distance-to-target histogram (DTH). The database consists of 198 high quality prostate plans and was validated with 14 cases outside the training pool. Principal component analysis (PCA) was applied to DVHs and DTHs to quantify their salient features. Then, support vector regression (SVR) was implemented to establish the correlation between the features of the DVH and the anatomical information. Results: DVH/DTH curves could be characterized sufficiently just using only two or three truncated principal components, thus, patient anatomical information was quantified with reduced numbers of variables. The evaluation of the model using the test data set demonstrated its accuracy ∼80% in prediction and effectiveness in improving ART planning quality. Conclusions: An adaptive IMRT plan quality evaluation tool based on machine learning has been developed, which estimates OAR sparing and provides reference in evaluating ART.

  15. Abalone Muscle Texture Evaluation and Prediction Based on TPA Experiment

    Directory of Open Access Journals (Sweden)

    Jiaxu Dong

    2017-01-01

    Full Text Available The effects of different heat treatments on abalones’ texture properties and sensory characteristics were studied. Thermal processing of abalone muscle was analyzed to determine the optimal heat treatment condition based on fuzzy evaluation. The results showed that heat treatment at 85°C for 1 hour had certain desirable effects on the properties of the abalone meat. Specifically, a back propagation (BP neural network was introduced to predict the equations of statistically significant sensory hardness, springiness, and smell using the texture data gained through TPA (texture profile analysis experiments as input and sensory evaluation data as the desired output. The final outcome was that the predictability was proved to be satisfactory, with an average error of 6.93%.

  16. Evaluation of Performance of Investment Funds Based on Decision Models (DEA

    Directory of Open Access Journals (Sweden)

    Alireza Samet

    2016-12-01

    Full Text Available Selection of a suitable investment funds is very important from investors' point of view and may have a significant impact on the profit or loss of the funds. Therefore, evaluation of performance of investment funds to choose the most suitable fund will be given special emphasis. One of the new techniques for evaluating the performance of the Funds based on efficiency is the Data Envelopment Analysis technique. Accordingly, the present study is aimed to analyze and evaluate the performance of investment Funds in capital market of Iran, using the technique of efficiency evaluation through data envelopment analysis technique (DEA. This research is a descriptive - applicable study and to analyze the efficiency and effectiveness, 53 investment funds in the capital market of Iran in 2013 were considered as the sample. To analyze the efficiency of these funds, data envelopment analysis (DEA is used. Research findings showed that in 2013, of a total of 53 examined funds, 11 funds were in the efficiency situation and the other 42 funds were in a state of inefficiency. Also the reference funds and virtual composited funds of all inefficient funds were evaluated.

  17. A method of computerized evaluation of CT based treatment plans in external radiotherapy

    International Nuclear Information System (INIS)

    Heufelder, J.; Zink, K.; Scholz, M.; Kramer, K.D.; Welker, K.

    2003-01-01

    Selection of an optimal treatment plan requires the comparison of dose distributions and dose-volume histograms (DVH) of all plan variants calculated for the patient. Each treatment plan consists generally of 30 to 40 CT slices, making the comparison difficult and time consuming. The present study proposes an objective index that takes into account both physical and biological criteria for the evaluation of the dose distribution. The DHV-based evaluation index can be calculated according to the following four criteria: ICRU conformity (review of the differences between the dose in the planning target volume and the ICRU recommendations); mean dose and dose homogeneity of the planning target volume; the product of tumour complication probability (TCP) and normal tissue complication probability (NTCP); and finally a criterion that takes into account the dose load of non-segmented tissue portions within the CT slice. The application of the objective index is demonstrated for two different clinical cases (esophagus and breast carcinoma). During the evaluation period, the objective index showed a good correlation between the doctor's decision and the proposed objective index. Thus, the objective index is suitable for a computer-based evaluation of treatment plans. (orig.) [de

  18. Damage evaluation on oil-based drill-in fluids for ultra-deep fractured tight sandstone gas reservoirs

    Directory of Open Access Journals (Sweden)

    Jinzhi Zhu

    2017-07-01

    Full Text Available In order to explore the damage mechanisms and improve the method to evaluate and optimize the performance of formation damage control of oil-based drill-in fluids, this paper took an ultra-deep fractured tight gas reservoir in piedmont configuration, located in the Cretaceous Bashijiqike Fm of the Tarim Basin, as an example. First, evaluation experiments were conducted on the filtrate invasion, the dynamic damage of oil-based drill-in fluids and the loading capacity of filter cakes. Meanwhile, the evaluating methods were optimized for the formation damage control effect of oil-based drill-in fluids in laboratory: pre-processing drill-in fluids before grading analysis; using the dynamic damage method to simulate the damage process for evaluating the percentage of regained permeability; and evaluating the loading capacity of filter cakes. The experimental results show that (1 oil phase trapping damage and solid phase invasion are the main formation damage types; (2 the damage degree of filtrate is the strongest on the matrix; and (3 the dynamic damage degree of oil-based drill-in fluids reaches medium strong to strong on fractures and filter cakes show a good sealing capacity for the fractures less than 100 μm. In conclusion, the filter cakes' loading capacity should be first guaranteed, and both percentage of regained permeability and liquid trapping damage degree should be both considered in the oil-based drill-in fluids prepared for those ultra-deep fractured tight sandstone gas reservoirs.

  19. Evaluation of a Web-Based Holistic Stress Reduction Pilot Program Among Nurse-Midwives.

    Science.gov (United States)

    Wright, Erin M

    2018-06-01

    Work-related stress among midwives results in secondary traumatic stress, posttraumatic stress disorder, and job attrition. The purpose of this pilot project was to evaluate the effectiveness of a holistic, web-based program using holistic modalities for stress reduction and improved coping among certified nurse-midwives. A convenience sample of 10 midwives participated in a web-based holistic stress reduction intervention using yoga, mindfulness-based stress reduction, and meditation for four days each week over 4 weeks. Participants completed pre- and postintervention questionnaires (Perceived Stress Scale [PSS] and the Coping Self-Efficacy Scale [CSES]) for evaluation of effectiveness. The PSS means showed improvement in midwives' stress (16.4-12.3). The CSES means showed improvement in coping (174.8-214.5). Improvement was shown in each subscale of the CSES ("uses problem-focused coping": 19.2%; "stops unpleasant thoughts and emotions": 20.3%; and "gets support from family and friends": 16.6%). Findings suggest the potential for stress reduction and improved coping skills after using holistic techniques in a web-based format within a cohort of nurse-midwives. Further research of web-based, holistic intervention for stress reduction among midwives is warranted.

  20. Worried About us: Evaluating an Intervention for Relationship-Based Anxiety.

    Science.gov (United States)

    Paprocki, Christine M; Baucom, Donald H

    2017-03-01

    Although romantic relationships are commonly a source of pleasure and comfort, for some individuals they can be a source of persistent anxiety. The aim of the current investigation was to explore the construct of relationship-based anxiety and to evaluate the effectiveness of a brief couple-based psychoeducational session for this issue. Common behavioral patterns and cognitive tendencies seen among individuals with relationship-based anxiety were examined, including excessive reassurance-seeking, self-silencing, and partner accommodation. In the current investigation, a single psychoeducational session was developed to address these maladaptive interactive patterns of behavior specifically. The session was administered to a sample of 21 couples and was found to decrease levels of reassurance-seeking and self-silencing significantly among individuals with relationship anxiety, and to decrease levels of maladaptive accommodation behaviors significantly in their partners. © 2015 Family Process Institute.

  1. Semantics-Based Compiling: A Case Study in Type-Directed Partial Evaluation

    DEFF Research Database (Denmark)

    Danvy, Olivier; Vestergaard, René

    1996-01-01

    in the style of denotational semantics; – the output of the generated compiler is effectively three-address code, in the fashion and efficiency of the Dragon Book; – the generated compiler processes several hundred lines of source code per second. The source language considered in this case study is imperative......, block-structured, higher-order, call-by-value, allows subtyping, and obeys stack discipline. It is bigger than what is usually reported in the literature on semantics-based compiling and partial evaluation. Our compiling technique uses the first Futamura projection, i.e., we compile programs...... by specializing a definitional interpreter with respect to the program. Specialization is carried out using type-directed partial evaluation, which is a mild version of partial evaluation akin to lambda-calculus normalization. Our definitional interpreter follows the format of denotational semantics, with a clear...

  2. Value based building renovation - A tool for decision-making and evaluation

    DEFF Research Database (Denmark)

    Jensen, Per Anker; Maslesa, Esmir

    2015-01-01

    Research on the barriers for building renovation in Denmark has revealed that an important obstacle is a lack of simple and holistic tools that can assist stakeholders in prioritisation and decision-making during the early stages of building renovation projects. The purpose of this article...... is to present a tool - RENO-EVALUE, which can be used as decision support for sustainable renovation projects, and for evaluation, during and after building renovations. The tool is a result from the European Eracobuild project ACES - "A concept for promotion of sustainable retrofitting and renovation in early...... stages". This article presents the main result of a work package concerning benefits of renovation. RENO-EVALUE has been developed from four case studies on renovation projects in Denmark, tested and validated on the cases and in a Delphi study. The tool is value based by focusing on the different...

  3. A Bayesian approach to the evaluation of risk-based microbiological criteria for Campylobacter in broiler meat

    DEFF Research Database (Denmark)

    Ranta, Jukka; Lindqvist, Roland; Hansson, Ingrid

    2015-01-01

    Shifting from traditional hazard-based food safety management toward risk-based management requires statistical methods for evaluating intermediate targets in food production, such as microbiological criteria (MC), in terms of their effects on human risk of illness. A fully risk-based evaluation...... of MC involves several uncertainties that are related to both the underlying Quantitative Microbiological Risk Assessment (QMRA) model and the production-specific sample data on the prevalence and concentrations of microbes in production batches. We used Bayesian modeling for statistical inference...

  4. Evaluation of school-based reproductive health education program for adolescent girls.

    Science.gov (United States)

    Golbasi, Zehra; Taskin, Lale

    2009-01-01

    To evaluate the effectiveness of school-based reproductive health education for adolescent girls on the reproductive knowledge level of the girls. This research was carried out as a quasi-experimental study at two vocational girls high schools, one of which was used as the study school and the other as the control school. The study group (97 students) consisted of three classes representing every grade. The control group consisted of students selected likewise (92 students). Reproductive health education was given to students in the study group for 10 weeks; the control group was not subjected to any educational program. The impact of the program was evaluated with reproductive health knowledge test designed for this study. A pretest evaluated baseline knowledge, and a posttest measured the gain in knowledge. Baseline knowledge score of students in study and control group were similar and low (p > 0.05). We found that the reproductive health knowledge level of students in the study group increased significantly after the program of education. Post-test knowledge scores (75.03 +/- 13.82) of the students in the study group were higher than those of the control group (36.65 +/- 14.17). The results showed students' low baseline knowledge and a good ability to learn. A school-based reproductive health education is needed to promote knowledge and prevention in reproductive health among teenagers.

  5. Evaluation of calix[4]arene tethered Schiff bases for anion recognition

    International Nuclear Information System (INIS)

    Chawla, H.M.; Munjal, Priyanka

    2016-01-01

    Two calix[4]arene tethered Schiff base derivatives (L1 and L2) have been synthesized and their ion recognition capability has been evaluated through NMR, UV–vis and fluorescence spectroscopy. L1 interacts with cyanide ions very selectively to usher a significant change in color and fluorescence intensity. On the other hand L2 does not show selectivity for anion sensing despite having the same functional groups as those present in L1. The differential observations may be attributed to plausible stereo control of anion recognition and tautomerization in the synthesized Schiff base derivatives.

  6. Evaluation of calix[4]arene tethered Schiff bases for anion recognition

    Energy Technology Data Exchange (ETDEWEB)

    Chawla, H.M., E-mail: hmchawla@chemistry.iitd.ac.in; Munjal, Priyanka

    2016-11-15

    Two calix[4]arene tethered Schiff base derivatives (L1 and L2) have been synthesized and their ion recognition capability has been evaluated through NMR, UV–vis and fluorescence spectroscopy. L1 interacts with cyanide ions very selectively to usher a significant change in color and fluorescence intensity. On the other hand L2 does not show selectivity for anion sensing despite having the same functional groups as those present in L1. The differential observations may be attributed to plausible stereo control of anion recognition and tautomerization in the synthesized Schiff base derivatives.

  7. Developing evaluation instrument based on CIPP models on the implementation of portfolio assessment

    Science.gov (United States)

    Kurnia, Feni; Rosana, Dadan; Supahar

    2017-08-01

    This study aimed to develop an evaluation instrument constructed by CIPP model on the implementation of portfolio assessment in science learning. This study used research and development (R & D) method; adapting 4-D by the development of non-test instrument, and the evaluation instrument constructed by CIPP model. CIPP is the abbreviation of Context, Input, Process, and Product. The techniques of data collection were interviews, questionnaires, and observations. Data collection instruments were: 1) the interview guidelines for the analysis of the problems and the needs, 2) questionnaire to see level of accomplishment of portfolio assessment instrument, and 3) observation sheets for teacher and student to dig up responses to the portfolio assessment instrument. The data obtained was quantitative data obtained from several validators. The validators consist of two lecturers as the evaluation experts, two practitioners (science teachers), and three colleagues. This paper shows the results of content validity obtained from the validators and the analysis result of the data obtained by using Aikens' V formula. The results of this study shows that the evaluation instrument based on CIPP models is proper to evaluate the implementation of portfolio assessment instruments. Based on the experts' judgments, practitioners, and colleagues, the Aikens' V coefficient was between 0.86-1,00 which means that it is valid and can be used in the limited trial and operational field trial.

  8. Valuing Our Communities: Ethical Considerations for Economic Evaluation of Community-Based Prevention.

    Science.gov (United States)

    Crowley, Max; Jones, Damon

    2017-12-01

    Restricted public budgets and increasing efforts to link the impact of community interventions to public savings have increased the use of economic evaluation. While this type of evaluation can be important for program planning, it also raises important ethical issues about how we value the time of local stakeholders who support community interventions. In particular, researchers navigate issues of scientific accuracy, institutional inequality, and research utility in their pursuit of even basic cost estimates. We provide an example of how we confronted these issues when estimating the costs of a large-scale community-based intervention. Principles for valuing community members' time and conducting economic evaluations of community programs are discussed. © Society for Community Research and Action 2017.

  9. Artificial Intelligence-Based Student Learning Evaluation: A Concept Map-Based Approach for Analyzing a Student's Understanding of a Topic

    Science.gov (United States)

    Jain, G. Panka; Gurupur, Varadraj P.; Schroeder, Jennifer L.; Faulkenberry, Eileen D.

    2014-01-01

    In this paper, we describe a tool coined as artificial intelligence-based student learning evaluation tool (AISLE). The main purpose of this tool is to improve the use of artificial intelligence techniques in evaluating a student's understanding of a particular topic of study using concept maps. Here, we calculate the probability distribution of…

  10. Color image definition evaluation method based on deep learning method

    Science.gov (United States)

    Liu, Di; Li, YingChun

    2018-01-01

    In order to evaluate different blurring levels of color image and improve the method of image definition evaluation, this paper proposed a method based on the depth learning framework and BP neural network classification model, and presents a non-reference color image clarity evaluation method. Firstly, using VGG16 net as the feature extractor to extract 4,096 dimensions features of the images, then the extracted features and labeled images are employed in BP neural network to train. And finally achieve the color image definition evaluation. The method in this paper are experimented by using images from the CSIQ database. The images are blurred at different levels. There are 4,000 images after the processing. Dividing the 4,000 images into three categories, each category represents a blur level. 300 out of 400 high-dimensional features are trained in VGG16 net and BP neural network, and the rest of 100 samples are tested. The experimental results show that the method can take full advantage of the learning and characterization capability of deep learning. Referring to the current shortcomings of the major existing image clarity evaluation methods, which manually design and extract features. The method in this paper can extract the images features automatically, and has got excellent image quality classification accuracy for the test data set. The accuracy rate is 96%. Moreover, the predicted quality levels of original color images are similar to the perception of the human visual system.

  11. MRI evaluation of a new scaffold-based allogenic chondrocyte implantation for cartilage repair

    International Nuclear Information System (INIS)

    Dhollander, A.A.M.; Huysse, W.C.J.; Verdonk, P.C.M.; Verstraete, K.L.; Verdonk, R.; Verbruggen, G.; Almqvist, K.F.

    2010-01-01

    Aim: The present study was designed to evaluate the implantation of alginate beads containing human mature allogenic chondrocytes for the treatment of symptomatic cartilage defects of the knee. MRI was used for the morphological analysis of cartilage repair. The correlation between MRI findings and clinical outcome was also studied. Methods: A biodegradable, alginate-based biocompatible scaffold containing human mature allogenic chondrocytes was used for the treatment of symptomatic chondral and osteochondral lesions in the knee. Twenty-one patients were prospectively evaluated with use of the Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) and the Visual Analogue Scale (VAS) for pain preoperatively and at 3, 6, 9 and 12 months of follow-up. Of the 21 patients, 12 had consented to follow the postoperative MRI evaluation protocol. MRI data were analyzed based on the original MOCART (Magnetic Resonance Observation of Cartilage Repair Tissue) and modified MOCART scoring system. The correlation between the clinical outcome and MRI findings was evaluated. Results: A statistically significant clinical improvement became apparent after 6 months and patients continued to improve during the 12 months of follow-up. One of the two MRI scoring systems that were used, showed a statistically significant deterioration of the repair tissue at 1 year of follow-up. Twelve months after the operation complete filling or hypertrophy was found in 41.6%. Bone-marrow edema and effusion were seen in 41.7% and 25% of the study patients, respectively. We did not find a consistent correlation between the MRI criteria and the clinical results. Discussion: The present study confirmed the primary role of MRI in the evaluation of cartilage repair. Two MOCART-based scoring systems were used in a longitudinal fashion and allowed a practical and morphological evaluation of the repair tissue. However, the correlation between clinical outcome and MRI findings was poor. Further

  12. MRI evaluation of a new scaffold-based allogenic chondrocyte implantation for cartilage repair

    Energy Technology Data Exchange (ETDEWEB)

    Dhollander, A.A.M., E-mail: Aad.Dhollander@Ugent.b [Department of Orthopaedic Surgery and Traumatology, Ghent University Hospital, De Pintelaan 185, 1P5, B9000 Gent (Belgium); Huysse, W.C.J., E-mail: Wouter.Huysse@Ugent.b [Department of Radiology, Ghent University Hospital, De Pintelaan 185, -1K12 IB, B9000 Gent (Belgium); Verdonk, P.C.M., E-mail: pverdonk@yahoo.co [Department of Orthopaedic Surgery and Traumatology, Ghent University Hospital, De Pintelaan 185, 1P5, B9000 Gent (Belgium); Verstraete, K.L., E-mail: Koenraad.Verstraete@Ugent.b [Department of Radiology, Ghent University Hospital, De Pintelaan 185, -1K12 IB, B9000 Gent (Belgium); Verdonk, R., E-mail: Rene.Verdonk@Ugent.b [Department of Orthopaedic Surgery and Traumatology, Ghent University Hospital, De Pintelaan 185, 1P5, B9000 Gent (Belgium); Verbruggen, G., E-mail: Gust.Verbruggen@Ugent.b [Laboratory of Connective Tissue Biology, Department of Rheumatology, Ghent University Hospital, De Pintelaan 185, Ghent (Belgium); Almqvist, K.F., E-mail: Fredrik.Almqvist@Ugent.b [Department of Orthopaedic Surgery and Traumatology, Ghent University Hospital, De Pintelaan 185, 1P5, B9000 Gent (Belgium)

    2010-07-15

    Aim: The present study was designed to evaluate the implantation of alginate beads containing human mature allogenic chondrocytes for the treatment of symptomatic cartilage defects of the knee. MRI was used for the morphological analysis of cartilage repair. The correlation between MRI findings and clinical outcome was also studied. Methods: A biodegradable, alginate-based biocompatible scaffold containing human mature allogenic chondrocytes was used for the treatment of symptomatic chondral and osteochondral lesions in the knee. Twenty-one patients were prospectively evaluated with use of the Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) and the Visual Analogue Scale (VAS) for pain preoperatively and at 3, 6, 9 and 12 months of follow-up. Of the 21 patients, 12 had consented to follow the postoperative MRI evaluation protocol. MRI data were analyzed based on the original MOCART (Magnetic Resonance Observation of Cartilage Repair Tissue) and modified MOCART scoring system. The correlation between the clinical outcome and MRI findings was evaluated. Results: A statistically significant clinical improvement became apparent after 6 months and patients continued to improve during the 12 months of follow-up. One of the two MRI scoring systems that were used, showed a statistically significant deterioration of the repair tissue at 1 year of follow-up. Twelve months after the operation complete filling or hypertrophy was found in 41.6%. Bone-marrow edema and effusion were seen in 41.7% and 25% of the study patients, respectively. We did not find a consistent correlation between the MRI criteria and the clinical results. Discussion: The present study confirmed the primary role of MRI in the evaluation of cartilage repair. Two MOCART-based scoring systems were used in a longitudinal fashion and allowed a practical and morphological evaluation of the repair tissue. However, the correlation between clinical outcome and MRI findings was poor. Further

  13. Water Quality Evaluation of the Yellow River Basin Based on Gray Clustering Method

    Science.gov (United States)

    Fu, X. Q.; Zou, Z. H.

    2018-03-01

    Evaluating the water quality of 12 monitoring sections in the Yellow River Basin comprehensively by grey clustering method based on the water quality monitoring data from the Ministry of environmental protection of China in May 2016 and the environmental quality standard of surface water. The results can reflect the water quality of the Yellow River Basin objectively. Furthermore, the evaluation results are basically the same when compared with the fuzzy comprehensive evaluation method. The results also show that the overall water quality of the Yellow River Basin is good and coincident with the actual situation of the Yellow River basin. Overall, gray clustering method for water quality evaluation is reasonable and feasible and it is also convenient to calculate.

  14. A financial evaluation of biomass-gasifier-based power generation in India

    International Nuclear Information System (INIS)

    Tripathi, A.K.; Iyer, P.V.R.; Kandpal, T.C.

    1997-01-01

    A preliminary financial evaluation of biomass-gasifier-based power generation in India was undertaken. Simple cost functions were developed and used for this purpose. The unit cost of electricity has been estimated for a variety of scenarios taking into account some of the uncertainties associated with this emerging technology in India. (author)

  15. Performance Evaluation of Hadoop-based Large-scale Network Traffic Analysis Cluster

    Directory of Open Access Journals (Sweden)

    Tao Ran

    2016-01-01

    Full Text Available As Hadoop has gained popularity in big data era, it is widely used in various fields. The self-design and self-developed large-scale network traffic analysis cluster works well based on Hadoop, with off-line applications running on it to analyze the massive network traffic data. On purpose of scientifically and reasonably evaluating the performance of analysis cluster, we propose a performance evaluation system. Firstly, we set the execution times of three benchmark applications as the benchmark of the performance, and pick 40 metrics of customized statistical resource data. Then we identify the relationship between the resource data and the execution times by a statistic modeling analysis approach, which is composed of principal component analysis and multiple linear regression. After training models by historical data, we can predict the execution times by current resource data. Finally, we evaluate the performance of analysis cluster by the validated predicting of execution times. Experimental results show that the predicted execution times by trained models are within acceptable error range, and the evaluation results of performance are accurate and reliable.

  16. The Development and Application of Crop Evaluation System Based on GRA

    Directory of Open Access Journals (Sweden)

    Ruihong Wang

    2016-01-01

    Full Text Available Ever since it was proposed, grey system theory has attracted the attention of scientific researchers and scholars. And it also has been widely used in many fields and solved a large number of practical problems in production, life, and scientific research. With the development and popularization of computer science and network technology, this traditional mathematical model can be applied more simply and efficiently to solve practical problems. Firstly, this paper, to implement steps of grey relational analysis, has made the exclusive analysis and has made the simple introduction to grey relational analysis characteristics. Then, based on grey relational theory and ASP.NET technology, the crop evaluation system is developed. Lastly, by using Excel and the crop evaluation system, the paper carries out a comprehensive evaluation about eight features of Fuji apple, which is from nine different producing areas, respectively. The experiment results show that the crop evaluation system is effective and could greatly improve the work efficiency of the researcher and expand the application scope.

  17. Evaluation of the user experience of "astronaut training device": an immersive, vr-based, motion-training system

    Science.gov (United States)

    Yue, Kang; Wang, Danli; Yang, Xinpan; Hu, Haichen; Liu, Yuqing; Zhu, Xiuqing

    2016-10-01

    To date, as the different application fields, most VR-based training systems have been different. Therefore, we should take the characteristics of application field into consideration and adopt different evaluation methods when evaluate the user experience of these training systems. In this paper, we propose a method to evaluate the user experience of virtual astronauts training system. Also, we design an experiment based on the proposed method. The proposed method takes learning performance as one of the evaluation dimensions, also combines with other evaluation dimensions such as: presence, immersion, pleasure, satisfaction and fatigue to evaluation user experience of the System. We collect subjective and objective data, the subjective data are mainly from questionnaire designed based on the evaluation dimensions and user interview conducted before and after the experiment. While the objective data are consisted of Electrocardiogram (ECG), reaction time, numbers of reaction error and the video data recorded during the experiment. For the analysis of data, we calculate the integrated score of each evaluation dimension by using factor analysis. In order to improve the credibility of the assessment, we use the ECG signal and reaction test data before and after experiment to validate the changes of fatigue during the experiment, and the typical behavioral features extracted from the experiment video to explain the result of subjective questionnaire. Experimental results show that the System has a better user experience and learning performance, but slight visual fatigue exists after experiment.

  18. Evaluation of weather-based rice yield models in India

    Science.gov (United States)

    Sudharsan, D.; Adinarayana, J.; Reddy, D. Raji; Sreenivas, G.; Ninomiya, S.; Hirafuji, M.; Kiura, T.; Tanaka, K.; Desai, U. B.; Merchant, S. N.

    2013-01-01

    The objective of this study was to compare two different rice simulation models—standalone (Decision Support System for Agrotechnology Transfer [DSSAT]) and web based (SImulation Model for RIce-Weather relations [SIMRIW])—with agrometeorological data and agronomic parameters for estimation of rice crop production in southern semi-arid tropics of India. Studies were carried out on the BPT5204 rice variety to evaluate two crop simulation models. Long-term experiments were conducted in a research farm of Acharya N G Ranga Agricultural University (ANGRAU), Hyderabad, India. Initially, the results were obtained using 4 years (1994-1997) of data with weather parameters from a local weather station to evaluate DSSAT simulated results with observed values. Linear regression models used for the purpose showed a close relationship between DSSAT and observed yield. Subsequently, yield comparisons were also carried out with SIMRIW and DSSAT, and validated with actual observed values. Realizing the correlation coefficient values of SIMRIW simulation values in acceptable limits, further rice experiments in monsoon (Kharif) and post-monsoon (Rabi) agricultural seasons (2009, 2010 and 2011) were carried out with a location-specific distributed sensor network system. These proximal systems help to simulate dry weight, leaf area index and potential yield by the Java based SIMRIW on a daily/weekly/monthly/seasonal basis. These dynamic parameters are useful to the farming community for necessary decision making in a ubiquitous manner. However, SIMRIW requires fine tuning for better results/decision making.

  19. Videoconferencing of a national program for residents on evidence-based practice: early performance evaluation.

    LENUS (Irish Health Repository)

    O'Regan, Kevin

    2010-01-01

    The aim of this study was to evaluate the effectiveness of the medium of videoconferencing for the delivery of a course for radiology residents in practice-based learning (PBL), including evidence-based practice, at centers geographically separated from the principal teaching site.

  20. Evaluation of web-based instruction for anatomical interpretation in maxillofacial cone beam computed tomography

    NARCIS (Netherlands)

    Al-Rawi, W.T.; Jacobs, R.; Hassan, B.A.; Sanderink, G.; Scarfe, W.C.

    2007-01-01

    Objectives: To evaluate the effectiveness of a web-based instruction in the interpretation of anatomy in images acquired with maxillofacial cone beam CT (CBCT). Methods: An interactive web-based education course for the interpretation of craniofacial CBCT images was recently developed at our

  1. Evidence-Based versus Junk-Based Evaluation Research: Some Lessons from 35 Years of the Evaluation Review

    Science.gov (United States)

    Berk, Richard

    2011-01-01

    Along with the late Howard Freeman, Richard Berk was a founding editor of "Evaluation Review" (then "Evaluation Quarterly") in 1977. He resigned as editor of this journal at the end of 2010. In this article, he reflects on his experiences. (Contains 3 notes.)

  2. A Self-adaptive Dynamic Evaluation Model for Diabetes Mellitus, Based on Evolutionary Strategies

    Directory of Open Access Journals (Sweden)

    An-Jiang Lu

    2016-03-01

    Full Text Available In order to evaluate diabetes mellitus objectively and accurately, this paper builds a self-adaptive dynamic evaluation model for diabetes mellitus, based on evolutionary strategies. First of all, on the basis of a formalized description of the evolutionary process of diabetes syndromes, using a state transition function, it judges whether a disease is evolutionary, through an excitation parameter. It then, provides evidence for the rebuilding of the evaluation index system. After that, by abstracting and rebuilding the composition of evaluation indexes, it makes use of a heuristic algorithm to determine the composition of the evolved evaluation index set of diabetes mellitus, It then, calculates the weight of each index in the evolved evaluation index set of diabetes mellitus by building a dependency matrix and realizes the self-adaptive dynamic evaluation of diabetes mellitus under an evolutionary environment. Using this evaluation model, it is possible to, quantify all kinds of diagnoses and treatment experiences of diabetes and finally to adopt ideal diagnoses and treatment measures for different patients with diabetics.

  3. Energy Sustainability Evaluation Model Based on the Matter-Element Extension Method: A Case Study of Shandong Province, China

    Directory of Open Access Journals (Sweden)

    Siqi Li

    2017-11-01

    Full Text Available Energy sustainability is of vital importance to regional sustainability, because energy sustainability is closely related to both regional economic growth and social stability. The existing energy sustainability evaluation methods lack a unified system to determine the relevant influencing factors, are relatively weak in quantitative analysis, and do not fully describe the ‘paradoxical’ characteristics of energy sustainability. To solve those problems and to reasonably and objectively evaluate energy sustainability, we propose an energy sustainability evaluation model based on the matter-element extension method. We first select energy sustainability evaluation indexes based on previous research and experience. Then, a variation coefficient method is used to determine the weights of these indexes. Finally, the study establishes the classical domain, joint domain, and the matter-element relationship to evaluate energy sustainability through matter-element extension. Data from Shandong Province is used as a case study to evaluate the region’s energy sustainability. The case study shows that the proposed energy sustainability evaluation model, based on the matter-element extension method, can effectively evaluate regional energy sustainability.

  4. Study on bridge checking evaluation based on deformation-Stress data

    Science.gov (United States)

    Shi, Jing Xian; Cheng, Ying Jie

    2018-06-01

    Bridge structure plays a very important role in human traffic. The evaluation of bridge structure after a certain period of operation has always been the focus of the bridge. Based on the data collected from the health inspection system of a continuous rigid frame bridge on a highway in Yunnan, China, it is found that there is a certain linear relationship between the deformation and stress of the bridge structure. In view of a specific section of the structure, the stress value of this section can be derived according to its deformation value. The coefficient K can be calculated by comparing the estimated value to the actual measured value. According to the range of the K value, the structural state of the bridge can be evaluated to a certain extent.

  5. [Development and practice evaluation of blood acid-base imbalance analysis software].

    Science.gov (United States)

    Chen, Bo; Huang, Haiying; Zhou, Qiang; Peng, Shan; Jia, Hongyu; Ji, Tianxing

    2014-11-01

    To develop a blood gas, acid-base imbalance analysis computer software to diagnose systematically, rapidly, accurately and automatically determine acid-base imbalance type, and evaluate the clinical application. Using VBA programming language, a computer aided diagnostic software for the judgment of acid-base balance was developed. The clinical data of 220 patients admitted to the Second Affiliated Hospital of Guangzhou Medical University were retrospectively analyzed. The arterial blood gas [pH value, HCO(3)(-), arterial partial pressure of carbon dioxide (PaCO₂)] and electrolytes included data (Na⁺ and Cl⁻) were collected. Data were entered into the software for acid-base imbalances judgment. At the same time the data generation was calculated manually by H-H compensation formula for determining the type of acid-base imbalance. The consistency of judgment results from software and manual calculation was evaluated, and the judgment time of two methods was compared. The clinical diagnosis of the types of acid-base imbalance for the 220 patients: 65 cases were normal, 90 cases with simple type, mixed type in 41 cases, and triplex type in 24 cases. The accuracy of the judgment results of the normal and triplex types from computer software compared with which were calculated manually was 100%, the accuracy of the simple type judgment was 98.9% and 78.0% for the mixed type, and the total accuracy was 95.5%. The Kappa value of judgment result from software and manual judgment was 0.935, P=0.000. It was demonstrated that the consistency was very good. The time for software to determine acid-base imbalances was significantly shorter than the manual judgment (seconds:18.14 ± 3.80 vs. 43.79 ± 23.86, t=7.466, P=0.000), so the method of software was much faster than the manual method. Software judgment can replace manual judgment with the characteristics of rapid, accurate and convenient, can improve work efficiency and quality of clinical doctors and has great

  6. Evaluation of some vanillin-modified polyoxyethylene surfactants as additives for water based mud

    Directory of Open Access Journals (Sweden)

    M.M.A. El-Sukkary

    2014-03-01

    Full Text Available Water-based drilling fluids are increasingly being used for oil and gas exploration and are generally considered to be more environmentally acceptable than oil-based or synthetic-based fluids. In this study, new types of vanillin-modified polyoxyethylene surfactants were evaluated as additives in water-based mud. Their rheological properties in water-based mud were investigated which included the apparent viscosity, the plastic viscosity, the yield point, the gel strength, the thixotropy as well as the filtration properties. Also, the effect of high temperature on the rheology of the formulated water based mud was studied. The tested ethoxylated non-ionic surfactants showed good results when utilized in the formulation of water-based mud.

  7. Evaluation Framework Based on Fuzzy Measured Method in Adaptive Learning Systems

    Science.gov (United States)

    Ounaies, Houda Zouari; Jamoussi, Yassine; Ben Ghezala, Henda Hajjami

    2008-01-01

    Currently, e-learning systems are mainly web-based applications and tackle a wide range of users all over the world. Fitting learners' needs is considered as a key issue to guaranty the success of these systems. Many researches work on providing adaptive systems. Nevertheless, evaluation of the adaptivity is still in an exploratory phase.…

  8. A toolbox for safety instrumented system evaluation based on improved continuous-time Markov chain

    Science.gov (United States)

    Wardana, Awang N. I.; Kurniady, Rahman; Pambudi, Galih; Purnama, Jaka; Suryopratomo, Kutut

    2017-08-01

    Safety instrumented system (SIS) is designed to restore a plant into a safe condition when pre-hazardous event is occur. It has a vital role especially in process industries. A SIS shall be meet with safety requirement specifications. To confirm it, SIS shall be evaluated. Typically, the evaluation is calculated by hand. This paper presents a toolbox for SIS evaluation. It is developed based on improved continuous-time Markov chain. The toolbox supports to detailed approach of evaluation. This paper also illustrates an industrial application of the toolbox to evaluate arch burner safety system of primary reformer. The results of the case study demonstrates that the toolbox can be used to evaluate industrial SIS in detail and to plan the maintenance strategy.

  9. Evaluation of a rapid LMP-based approach for calculating marginal unit emissions

    International Nuclear Information System (INIS)

    Rogers, Michelle M.; Wang, Yang; Wang, Caisheng; McElmurry, Shawn P.; Miller, Carol J.

    2013-01-01

    Graphical abstract: Display Omitted - Highlights: • Pollutant emissions estimated based on locational marginal price and eGRID data. • Stochastic model using IEEE RTS-96 system used to evaluate LMP approach. • Incorporating membership function enhanced reliability of pollutant estimate. • Error in pollutant estimate typically 2 and X and SO 2 . - Abstract: To evaluate the sustainability of systems that draw power from electrical grids there is a need to rapidly and accurately quantify pollutant emissions associated with power generation. Air emissions resulting from electricity generation vary widely among power plants based on the types of fuel consumed, the efficiency of the plant, and the type of pollution control systems in service. To address this need, methods for estimating real-time air emissions from power generation based on locational marginal prices (LMPs) have been developed. Based on LMPs the type of the marginal generating unit can be identified and pollutant emissions are estimated. While conceptually demonstrated, this LMP approach has not been rigorously tested. The purpose of this paper is to (1) improve the LMP method for predicting pollutant emissions and (2) evaluate the reliability of this technique through power system simulations. Previous LMP methods were expanded to include marginal emissions estimates using an LMP Emissions Estimation Method (LEEM). The accuracy of emission estimates was further improved by incorporating a probability distribution function that characterize generator fuel costs and a membership function (MF) capable of accounting for multiple marginal generation units. Emission estimates were compared to those predicted from power flow simulations. The improved LEEM was found to predict the marginal generation type approximately 70% of the time based on typical system conditions (e.g. loads and fuel costs) without the use of a MF. With the addition of a MF, the LEEM was found to provide emission estimates with

  10. The contribution of process tracing to theory-based evaluations of complex aid instruments

    DEFF Research Database (Denmark)

    Beach, Derek; Schmitt, Johannes

    2015-01-01

    studies in demanding settings. For the specific task of evaluating the governance effectiveness of budget support interventions, we developed a more fine-grained causal mechanism for a subset of the comprehensive program theory of budget support. Moreover, based on the informal use of Bayesian logic, we...... remedy some of the problems at hand in much case-study research and increase the inferential leverage in complex within-case evaluation studies....

  11. Evaluation of an energy-based fatigue approach considering mean stress effects

    Energy Technology Data Exchange (ETDEWEB)

    Kabir, S. M. Humayun [Chittagong University of Engineering and Technology, Chittagong (Bangladesh); Yeo, Tae In [University of Ulsan, Ulsan (Korea, Republic of)

    2014-04-15

    In this paper, an attempt is made to extend the total strain energy approach for predicting the fatigue life subjected to mean stress under uniaxial state. The effects of means stress on the fatigue failure of a ferritic stainless steel and high pressure tube steel are studied under strain-controlled low cycle fatigue condition. Based on the fatigue results from different strain ratios, modified total strain energy density approach is proposed to account for the mean stress effects. The proposed damage parameter provides convenient means of evaluating fatigue life with mean stress effects considering the fact that the definitions used for measuring strain energies are the same as in the fully-reversed cycling (R = -1). A good agreement is observed between experimental life and predicted life using proposed approach. Two other mean stress models (Smith-Watson-Topper model and Morrow model) are also used to evaluate the low cycle fatigue data. Based on a simple statistical estimator, the proposed approach is compared with these models and is found realistic.

  12. Evaluation of an energy-based fatigue approach considering mean stress effects

    International Nuclear Information System (INIS)

    Kabir, S. M. Humayun; Yeo, Tae In

    2014-01-01

    In this paper, an attempt is made to extend the total strain energy approach for predicting the fatigue life subjected to mean stress under uniaxial state. The effects of means stress on the fatigue failure of a ferritic stainless steel and high pressure tube steel are studied under strain-controlled low cycle fatigue condition. Based on the fatigue results from different strain ratios, modified total strain energy density approach is proposed to account for the mean stress effects. The proposed damage parameter provides convenient means of evaluating fatigue life with mean stress effects considering the fact that the definitions used for measuring strain energies are the same as in the fully-reversed cycling (R = -1). A good agreement is observed between experimental life and predicted life using proposed approach. Two other mean stress models (Smith-Watson-Topper model and Morrow model) are also used to evaluate the low cycle fatigue data. Based on a simple statistical estimator, the proposed approach is compared with these models and is found realistic.

  13. Evaluation of workplace based assessment tools in dental foundation training.

    Science.gov (United States)

    Grieveson, B; Kirton, J A; Palmer, N O A; Balmer, M C

    2011-08-26

    The aims of this survey were to evaluate the effectiveness of workplace based assessments (WPAs) in dental foundation training (formerly vocational training [VT]). Two online questionnaire surveys were sent to 53 foundation dental practitioners (FDPs) and their 51 trainers in the Mersey Deanery at month four and month nine of the one year of dental foundation training. The questionnaires investigated the effectiveness of and trainers' and trainees' satisfaction with the WPAs used in foundation training, namely dental evaluation of performance (D-EPs), case-based discussions (DcBD) and patients' assessment questionnaires (PAQs). The questionnaires also investigated the perceived impact of reflection and feedback associated with WPAs on clinical practise and improving patient care. A total of 41 (7.4%) FDPs and 44 (86.3%) trainers responded. Of the 41 FDPs, the majority found that feedback from WPAs had a positive effect on their training, giving them insight into their development needs. Overall 84.1% of the FDPs felt the WPAs helped them improve patient care and 82.5% of trainers agreed with that outcome. The findings from this study demonstrate the value of WPAs in dental foundation training by the use of feedback and reflection in directing the learning of foundation dental practitioners and that this can lead to improved clinical practise and patient care.

  14. The evaluation model of the enterprise energy efficiency based on DPSR.

    Science.gov (United States)

    Wei, Jin-Yu; Zhao, Xiao-Yu; Sun, Xue-Shan

    2017-05-08

    The reasonable evaluation of the enterprise energy efficiency is an important work in order to reduce the energy consumption. In this paper, an effective energy efficiency evaluation index system is proposed based on DPSR (Driving forces-Pressure-State-Response) with the consideration of the actual situation of enterprises. This index system which covers multi-dimensional indexes of the enterprise energy efficiency can reveal the complete causal chain which includes the "driver forces" and "pressure" of the enterprise energy efficiency "state" caused by the internal and external environment, and the ultimate enterprise energy-saving "response" measures. Furthermore, the ANP (Analytic Network Process) and cloud model are used to calculate the weight of each index and evaluate the energy efficiency level. The analysis of BL Company verifies the feasibility of this index system and also provides an effective way to improve the energy efficiency at last.

  15. A study on the steam generator data base and the evaluation of chemical environment

    International Nuclear Information System (INIS)

    Yang, Kyung Rin; Yoo, Je Hyoo; Lee, Eun He; Hong, Kwang Pum

    1990-01-01

    In order to make steam generator data base, the basic plant information and water quality control data on the steam generators of the PWR nuclear power plant operating in the world have been collected by EPRI. In this project, the basic information and water quality control data of the domestic PWR nuclear power plants were collected to make steam generator data base on the basic of the EPRI format table, and the computerization of them was performed. Also, the technical evaluation of chemical environments on steam generator of the Kori 2 plant chemists. Workers and researchers working at the research institute and universities and so on. Especially, it is able to be used as a basic plant information in order to develop an artificial intellegence development system in the field on the technical development of the chemical environment. The scope and content of the project are following. The data base on the basic information data in domestic PWR plant. The steam generator data base on water quality control data. The evaluation on the chemical environment in the steam generators of the Kori 2 plant. From previous data, it is concluded as follows. The basic plant information on the domestic PWR power plant were computerized. The steam generator data base were made on the basis of EPRI format table. The chemical environment of the internal steam generators could be estimated from the analytical evaluation of water quality control data of the steam generator blowdown. (author)

  16. Practice Parameter: Evaluation of the child with microcephaly (an evidence-based review)

    Science.gov (United States)

    Ashwal, Stephen; Michelson, David; Plawner, Lauren; Dobyns, William B.

    2009-01-01

    Objective: To make evidence-based recommendations concerning the evaluation of the child with microcephaly. Methods: Relevant literature was reviewed, abstracted, and classified. Recommendations were based on a 4-tiered scheme of evidence classification. Results: Microcephaly is an important neurologic sign but there is nonuniformity in its definition and evaluation. Microcephaly may result from any insult that disturbs early brain growth and can be seen in association with hundreds of genetic syndromes. Annually, approximately 25,000 infants in the United States will be diagnosed with microcephaly (head circumference microcephaly (head circumference microcephaly (−2 to −3 SD; ∼40%). Coexistent conditions include epilepsy (∼40%), cerebral palsy (∼20%), mental retardation (∼50%), and ophthalmologic disorders (∼20% to ∼50%). Recommendations: Neuroimaging may be considered useful in identifying structural causes in the evaluation of the child with microcephaly (Level C). Targeted and specific genetic testing may be considered in the evaluation of the child with microcephaly who has clinical or imaging abnormalities that suggest a specific diagnosis or who shows no evidence of an acquired or environmental etiology (Level C). Screening for coexistent conditions such as cerebral palsy, epilepsy, and sensory deficits may also be considered (Level C). Further study is needed regarding the yield of diagnostic testing in children with microcephaly. GLOSSARY CP = cerebral palsy; GDD = global developmental delay; HC = head circumference; MRE = medically refractory epilepsy; OMIM = Online Mendelian Inheritance in Man. PMID:19752457

  17. School-based violence prevention strategy: a pilot evaluation.

    Science.gov (United States)

    Thakore, Rachel V; Apfeld, Jordan C; Johnson, Ronald K; Sathiyakumar, Vasanth; Jahangir, A Alex; Sethi, Manish K

    2015-07-01

    Violence has recently been reported among a primarily young, minority population in Nashville, Tennessee. School-based programs have been proven as effective methods of reducing violent behavior, beliefs, and actions that lead to violence among adolescents. Investigators implemented a rigorous search for an appropriate school-based violence prevention program for Metropolitan Nashville middle school students utilizing a systematic review and discussion group with victims of violence. 27 programs nation-wide were reviewed and 2 discussion groups with African American males under the age of 25 admitted to a level 1 trauma center for assault-related injuries were conducted. Our findings led to a single, evidence-based conflict resolution program. In conjunction with educators, we evaluated the program's effectiveness in a pilot study in a Nashville middle school with high rates of violence. 122 students completed the conflict resolution program and described their behavior and experiences with violence in a pre-test/post-test self-rate questionnaire. Results showed a significant decrease in violent behavior and an increase in students' competencies to deal with violence (p less than 0.05). This study shows that a reduction in violent behavior and beliefs among middle school students can be achieved through the implementation of a targeted violence intervention program. A larger-scale intervention is needed to develop more conclusive evidence of effectiveness. © 2015 KUMS, All rights reserved.

  18. Plant operator performance evaluation based on cognitive process analysis experiment

    International Nuclear Information System (INIS)

    Ujita, H.; Fukuda, M.

    1990-01-01

    This paper reports on an experiment to clarify plant operators' cognitive processes that has been performed, to improve the man-machine interface which supports their diagnoses and decisions. The cognitive processes under abnormal conditions were evaluated by protocol analyses interviews, etc. in the experiment using a plant training simulator. A cognitive process model is represented by a stochastic network, based on Rasmussen's decision making model. Each node of the network corresponds to an element of the cognitive process, such as observation, interpretation, execution, etc. Some observations were obtained as follows, by comparison of Monte Carlo simulation results with the experiment results: A process to reconfirm the plant parameters after execution of a task and feedback paths from this process to the observation and the task definition of next task were observed. The feedback probability average and standard deviation should be determined for each incident type to explain correctly the individual differences in the cognitive processes. The tendency for the operator's cognitive level to change from skill-based to knowledge-based via rule-based behavior was observed during the feedback process

  19. Development of web-based integrity evaluation system for primary components in a nuclear power plant

    Energy Technology Data Exchange (ETDEWEB)

    Lee, S.M.; Kim, J.C.; Choi, J.B.; Kim, Y.J. [SAFE Research Center, Sungkyunkwan Univ., Suwon (Korea); Choi, S.N.; Jang, K.S.; Hong, S.Y. [Korea Electronic Power Research Inst., Daejeon (Korea)

    2004-07-01

    A nuclear power plant is composed of a number of primary components. Maintaining the integrity of these components is one of the most critical issues in nuclear industry. In order to maintain the integrity of these primary components, a complicated procedure is required including periodical in-service inspection, failure assessment, fracture mechanics analysis, etc. Also, experts in different fields have to co-operate to resolve the integrity issues on the basis of inspection results. This integrity evaluation process usually takes long, and thus, is detrimental for the plant productivity. Therefore, an effective safety evaluation system is essential to manage integrity issues on a nuclear power plant. In this paper, a web-based integrity evaluation system for primary components in a nuclear power plant is proposed. The proposed system, which is named as WEBIES (web-based integrity evaluation system), has been developed in the form of 3-tier system architecture. The system consists of three servers; application program server, user interface program server and data warehouse server. The application program server includes the defect acceptance analysis module and the fracture mechanics analysis module which are programmed on the basis of ASME sec. XI, appendix A. The data warehouse server provides data for the integrity evaluation including material properties, geometry information, inspection data and stress data. The user interface program server provides information to all co- workers in the field of integrity evaluation. The developed system provides engineering knowledge-based information and concurrent and collaborative working environment through internet, and thus, is expected to raise the efficiency of integrity evaluation procedures on primary components of a nuclear power plant. (orig.)

  20. Development of web-based integrity evaluation system for primary components in a nuclear power plant

    International Nuclear Information System (INIS)

    Lee, S.M.; Kim, J.C.; Choi, J.B.; Kim, Y.J.; Choi, S.N.; Jang, K.S.; Hong, S.Y.

    2004-01-01

    A nuclear power plant is composed of a number of primary components. Maintaining the integrity of these components is one of the most critical issues in nuclear industry. In order to maintain the integrity of these primary components, a complicated procedure is required including periodical in-service inspection, failure assessment, fracture mechanics analysis, etc. Also, experts in different fields have to co-operate to resolve the integrity issues on the basis of inspection results. This integrity evaluation process usually takes long, and thus, is detrimental for the plant productivity. Therefore, an effective safety evaluation system is essential to manage integrity issues on a nuclear power plant. In this paper, a web-based integrity evaluation system for primary components in a nuclear power plant is proposed. The proposed system, which is named as WEBIES (web-based integrity evaluation system), has been developed in the form of 3-tier system architecture. The system consists of three servers; application program server, user interface program server and data warehouse server. The application program server includes the defect acceptance analysis module and the fracture mechanics analysis module which are programmed on the basis of ASME sec. XI, appendix A. The data warehouse server provides data for the integrity evaluation including material properties, geometry information, inspection data and stress data. The user interface program server provides information to all co- workers in the field of integrity evaluation. The developed system provides engineering knowledge-based information and concurrent and collaborative working environment through internet, and thus, is expected to raise the efficiency of integrity evaluation procedures on primary components of a nuclear power plant. (orig.)

  1. A QFD-Based Evaluation Method for Business Models of Product Service Systems

    Directory of Open Access Journals (Sweden)

    Tianyang Li

    2016-01-01

    Full Text Available Organizations have been approaching Product Service Systems (PSS in unoptimized business model fashions. This is partially because there is ineffective evaluation of PSS business models. Therefore, a more sufficient evaluation method might advance the evaluation of PSS business models and assist organizations that are considering a servitisation strategy. In this paper, we develop a value oriented method by using the Quality Function Deployment (QFD technique to employ correlations derived from the design information of PSS business models to evaluate these PSS business models. We describe the method applying steps and its practical application in a real life case study. This method improves the formulation of an evaluation step within a design process of PSS business models based on correlations of different dimensions of the PSS value and PSS business models; it allows a balance between the customer value and organization value that are delivered by PSS business models to be made quantitatively. Finally, it fosters the effective utilization of the design information accumulated in the earlier part of the design process to quantitatively evaluate whether a PSS business model is optimized for providing appropriate values for customers and organizations.

  2. A Dynamic Fuzzy Approach Based on the EDAS Method for Multi-Criteria Subcontractor Evaluation

    Directory of Open Access Journals (Sweden)

    Mehdi Keshavarz-Ghorabaee

    2018-03-01

    Full Text Available Selection of appropriate subcontractors for outsourcing is very important for the success of construction projects. This can improve the overall quality of projects and promote the qualification and reputation of the main contractors. The evaluation of subcontractors can be made by some experts or decision-makers with respect to some criteria. If this process is done in different time periods, it can be defined as a dynamic multi-criteria group decision-making (MCGDM problem. In this study, we propose a new fuzzy dynamic MCGDM approach based on the EDAS (Evaluation based on Distance from Average Solution method for subcontractor evaluation. In the procedure of the proposed approach, the sets of alternatives, criteria and decision-makers can be changed at different time periods. Also, the proposed approach gives more weight to newer decision information for aggregating the overall performance of alternatives. A numerical example is used to illustrate the proposed approach and show the application of it in subcontractor evaluation. The results demonstrate that the proposed approach is efficient and useful in real-world decision-making problems.

  3. LABORATORY SCALE EVALUATION OF HYDRA-TONE GRAFF-OFF™ COCONUT OIL BASED DEGREASER

    Science.gov (United States)

    This technical and economic assessment evaluated the effectiveness of a biodegradable, coconut oil-based degreaser called Graff-Off™. In immersion (cold) cleaning and rinse tests, Graff-Off™ was compared to a conventional chlorinated solvent 1,1,1 trichloroethane (TCA) and to an ...

  4. Health Research Governance: Introduction of a New Web-based Research Evaluation Model in Iran: One-decade Experience

    Science.gov (United States)

    MALEKZADEH, Reza; AKHONDZADEH, Shahin; EBADIFAR, Asghar; BARADARAN EFTEKHARI, Monir; OWLIA, Parviz; GHANEI, Mostafa; FALAHAT, Katayoun; HABIBI, Elham; SOBHANI, Zahra; DJALALINIA, Shirin; PAYKARI, Niloofar; MOJARRAB, Shahnaz; ELTEMASI, Masoumeh; LAALI, Reza

    2016-01-01

    Background: Governance is one of the main functions of Health Research System (HRS) that consist of four essential elements such as setting up evaluation system. The goal of this study was to introduce a new web based research evaluation model in Iran. Methods: Based on main elements of governance, research indicators have been clarified and with cooperation of technical team, appropriate software was designed. Three main steps in this study consist of developing of mission-oriented program, creating enabling environment and set up Iran Research Medical Portal as a center for research evaluation. Results: Fifty-two universities of medical sciences in three types have been participated. After training the evaluation focal points in all of medical universities, access to data entry and uploading all of documents were provided. Regarding to mission – based program, the contribution of medical universities in knowledge production was 60% for type one, 31% for type two and 9% for type three. The research priorities based on Essential National Health Research (ENHR) approach and mosaic model were gathered from universities of medical sciences and aggregated to nine main areas as national health research priorities. Ethical committees were established in all of medical universities. Conclusion: Web based research evaluation model is a comprehensive and integrated system for data collection in research. This system is appropriate tool to national health research ranking. PMID:27957437

  5. Quality Evaluation in Wireless Imaging Using Feature-Based Objective Metrics

    OpenAIRE

    Engelke, Ulrich; Zepernick, Hans-Jürgen

    2007-01-01

    This paper addresses the evaluation of image quality in the context of wireless systems using feature-based objective metrics. The considered metrics comprise of a weighted combination of feature values that are used to quantify the extend by which the related artifacts are present in a processed image. In view of imaging applications in mobile radio and wireless communication systems, reduced-reference objective quality metrics are investigated for quantifying user-perceived quality. The exa...

  6. Evaluating the effects of mindfulness-based interventions for informal palliative caregivers

    DEFF Research Database (Denmark)

    Jaffray, Linda; Bridgman, Heather; Stephens, Miranda

    2016-01-01

    guidelines and a Narrative synthesis. Data sources: The Cochrane Library, CINAHL, MEDLINE, PsycINFO and EMBASE databases, searched from inception to February 2014 and references of included studies. Results: A total of 13 articles, reporting 10 studies (n = 432 participants) were included. All studies were......Background: There is a need to identify proactive, evidence-based interventions to support informal palliative caregivers. Mindfulness-based interventions, evidenced in the literature as providing physical and mental health benefits for diverse populations, may have application in the setting...... of palliative caregiving. Aim: To describe, evaluate and synthesise the peer-reviewed literature on the effects of mindfulness-based interventions for informal palliative caregivers. Design: A Systematic Literature Review according to the Preferred Reporting Items for Systematic Review and Meta Analyses...

  7. A Census of Prison-Based Drug Treatment Programs: Implications for Programming, Policy, and Evaluation

    Science.gov (United States)

    Welsh, Wayne N.; Zajac, Gary

    2004-01-01

    Despite a growing realization that unmeasured programmatic differences influence prison-based drug treatment effectiveness, few attempts to systematically measure such differences have been made. To improve program planning and evaluation in this area, we developed a census instrument to collect descriptive information about 118 prison-based drug…

  8. SU-D-BRD-02: A Web-Based Image Processing and Plan Evaluation Platform (WIPPEP) for Future Cloud-Based Radiotherapy

    International Nuclear Information System (INIS)

    Chai, X; Liu, L; Xing, L

    2014-01-01

    Purpose: Visualization and processing of medical images and radiation treatment plan evaluation have traditionally been constrained to local workstations with limited computation power and ability of data sharing and software update. We present a web-based image processing and planning evaluation platform (WIPPEP) for radiotherapy applications with high efficiency, ubiquitous web access, and real-time data sharing. Methods: This software platform consists of three parts: web server, image server and computation server. Each independent server communicates with each other through HTTP requests. The web server is the key component that provides visualizations and user interface through front-end web browsers and relay information to the backend to process user requests. The image server serves as a PACS system. The computation server performs the actual image processing and dose calculation. The web server backend is developed using Java Servlets and the frontend is developed using HTML5, Javascript, and jQuery. The image server is based on open source DCME4CHEE PACS system. The computation server can be written in any programming language as long as it can send/receive HTTP requests. Our computation server was implemented in Delphi, Python and PHP, which can process data directly or via a C++ program DLL. Results: This software platform is running on a 32-core CPU server virtually hosting the web server, image server, and computation servers separately. Users can visit our internal website with Chrome browser, select a specific patient, visualize image and RT structures belonging to this patient and perform image segmentation running Delphi computation server and Monte Carlo dose calculation on Python or PHP computation server. Conclusion: We have developed a webbased image processing and plan evaluation platform prototype for radiotherapy. This system has clearly demonstrated the feasibility of performing image processing and plan evaluation platform through a web

  9. SU-D-BRD-02: A Web-Based Image Processing and Plan Evaluation Platform (WIPPEP) for Future Cloud-Based Radiotherapy

    Energy Technology Data Exchange (ETDEWEB)

    Chai, X; Liu, L; Xing, L [Stanford UniversitySchool of Medicine, Stanford, CA (United States)

    2014-06-01

    Purpose: Visualization and processing of medical images and radiation treatment plan evaluation have traditionally been constrained to local workstations with limited computation power and ability of data sharing and software update. We present a web-based image processing and planning evaluation platform (WIPPEP) for radiotherapy applications with high efficiency, ubiquitous web access, and real-time data sharing. Methods: This software platform consists of three parts: web server, image server and computation server. Each independent server communicates with each other through HTTP requests. The web server is the key component that provides visualizations and user interface through front-end web browsers and relay information to the backend to process user requests. The image server serves as a PACS system. The computation server performs the actual image processing and dose calculation. The web server backend is developed using Java Servlets and the frontend is developed using HTML5, Javascript, and jQuery. The image server is based on open source DCME4CHEE PACS system. The computation server can be written in any programming language as long as it can send/receive HTTP requests. Our computation server was implemented in Delphi, Python and PHP, which can process data directly or via a C++ program DLL. Results: This software platform is running on a 32-core CPU server virtually hosting the web server, image server, and computation servers separately. Users can visit our internal website with Chrome browser, select a specific patient, visualize image and RT structures belonging to this patient and perform image segmentation running Delphi computation server and Monte Carlo dose calculation on Python or PHP computation server. Conclusion: We have developed a webbased image processing and plan evaluation platform prototype for radiotherapy. This system has clearly demonstrated the feasibility of performing image processing and plan evaluation platform through a web

  10. Design and Evaluation of a Wireless Sensor Network Based Aircraft Strength Testing System

    Science.gov (United States)

    Wu, Jian; Yuan, Shenfang; Zhou, Genyuan; Ji, Sai; Wang, Zilong; Wang, Yang

    2009-01-01

    The verification of aerospace structures, including full-scale fatigue and static test programs, is essential for structure strength design and evaluation. However, the current overall ground strength testing systems employ a large number of wires for communication among sensors and data acquisition facilities. The centralized data processing makes test programs lack efficiency and intelligence. Wireless sensor network (WSN) technology might be expected to address the limitations of cable-based aeronautical ground testing systems. This paper presents a wireless sensor network based aircraft strength testing (AST) system design and its evaluation on a real aircraft specimen. In this paper, a miniature, high-precision, and shock-proof wireless sensor node is designed for multi-channel strain gauge signal conditioning and monitoring. A cluster-star network topology protocol and application layer interface are designed in detail. To verify the functionality of the designed wireless sensor network for strength testing capability, a multi-point WSN based AST system is developed for static testing of a real aircraft undercarriage. Based on the designed wireless sensor nodes, the wireless sensor network is deployed to gather, process, and transmit strain gauge signals and monitor results under different static test loads. This paper shows the efficiency of the wireless sensor network based AST system, compared to a conventional AST system. PMID:22408521

  11. Design and evaluation of a wireless sensor network based aircraft strength testing system.

    Science.gov (United States)

    Wu, Jian; Yuan, Shenfang; Zhou, Genyuan; Ji, Sai; Wang, Zilong; Wang, Yang

    2009-01-01

    The verification of aerospace structures, including full-scale fatigue and static test programs, is essential for structure strength design and evaluation. However, the current overall ground strength testing systems employ a large number of wires for communication among sensors and data acquisition facilities. The centralized data processing makes test programs lack efficiency and intelligence. Wireless sensor network (WSN) technology might be expected to address the limitations of cable-based aeronautical ground testing systems. This paper presents a wireless sensor network based aircraft strength testing (AST) system design and its evaluation on a real aircraft specimen. In this paper, a miniature, high-precision, and shock-proof wireless sensor node is designed for multi-channel strain gauge signal conditioning and monitoring. A cluster-star network topology protocol and application layer interface are designed in detail. To verify the functionality of the designed wireless sensor network for strength testing capability, a multi-point WSN based AST system is developed for static testing of a real aircraft undercarriage. Based on the designed wireless sensor nodes, the wireless sensor network is deployed to gather, process, and transmit strain gauge signals and monitor results under different static test loads. This paper shows the efficiency of the wireless sensor network based AST system, compared to a conventional AST system.

  12. Comparative evaluations of the Monte Carlo-based light propagation simulation packages for optical imaging

    Directory of Open Access Journals (Sweden)

    Lin Wang

    2018-01-01

    Full Text Available Monte Carlo simulation of light propagation in turbid medium has been studied for years. A number of software packages have been developed to handle with such issue. However, it is hard to compare these simulation packages, especially for tissues with complex heterogeneous structures. Here, we first designed a group of mesh datasets generated by Iso2Mesh software, and used them to cross-validate the accuracy and to evaluate the performance of four Monte Carlo-based simulation packages, including Monte Carlo model of steady-state light transport in multi-layered tissues (MCML, tetrahedron-based inhomogeneous Monte Carlo optical simulator (TIMOS, Molecular Optical Simulation Environment (MOSE, and Mesh-based Monte Carlo (MMC. The performance of each package was evaluated based on the designed mesh datasets. The merits and demerits of each package were also discussed. Comparative results showed that the TIMOS package provided the best performance, which proved to be a reliable, efficient, and stable MC simulation package for users.

  13. Evaluation of modal pushover-based scaling of one component of ground motion: Tall buildings

    Science.gov (United States)

    Kalkan, Erol; Chopra, Anil K.

    2012-01-01

    Nonlinear response history analysis (RHA) is now increasingly used for performance-based seismic design of tall buildings. Required for nonlinear RHAs is a set of ground motions selected and scaled appropriately so that analysis results would be accurate (unbiased) and efficient (having relatively small dispersion). This paper evaluates accuracy and efficiency of recently developed modal pushover–based scaling (MPS) method to scale ground motions for tall buildings. The procedure presented explicitly considers structural strength and is based on the standard intensity measure (IM) of spectral acceleration in a form convenient for evaluating existing structures or proposed designs for new structures. Based on results presented for two actual buildings (19 and 52 stories, respectively), it is demonstrated that the MPS procedure provided a highly accurate estimate of the engineering demand parameters (EDPs), accompanied by significantly reduced record-to-record variability of the responses. In addition, the MPS procedure is shown to be superior to the scaling procedure specified in the ASCE/SEI 7-05 document.

  14. Continuing Medical Education Speakers with High Evaluation Scores Use more Image-based Slides

    Directory of Open Access Journals (Sweden)

    Ferguson, Ian

    2017-01-01

    Full Text Available Although continuing medical education (CME presentations are common across health professions, it is unknown whether slide design is independently associated with audience evaluations of the speaker. Based on the conceptual framework of Mayer’s theory of multimedia learning, this study aimed to determine whether image use and text density in presentation slides are associated with overall speaker evaluations. This retrospective analysis of six sequential CME conferences (two annual emergency medicine conferences over a three-year period used a mixed linear regression model to assess whether postconference speaker evaluations were associated with image fraction (percentage of image-based slides per presentation and text density (number of words per slide. A total of 105 unique lectures were given by 49 faculty members, and 1,222 evaluations (70.1% response rate were available for analysis. On average, 47.4% (SD=25.36 of slides had at least one educationally-relevant image (image fraction. Image fraction significantly predicted overall higher evaluation scores [F(1, 100.676=6.158, p=0.015] in the mixed linear regression model. The mean (SD text density was 25.61 (8.14 words/slide but was not a significant predictor [F(1, 86.293=0.55, p=0.815]. Of note, the individual speaker [χ2 (1=2.952, p=0.003] and speaker seniority [F(3, 59.713=4.083, p=0.011] significantly predicted higher scores. This is the first published study to date assessing the linkage between slide design and CME speaker evaluations by an audience of practicing clinicians. The incorporation of images was associated with higher evaluation scores, in alignment with Mayer’s theory of multimedia learning. Contrary to this theory, however, text density showed no significant association, suggesting that these scores may be multifactorial. Professional development efforts should focus on teaching best practices in both slide design and presentation skills.

  15. Continuing Medical Education Speakers with High Evaluation Scores Use more Image-based Slides.

    Science.gov (United States)

    Ferguson, Ian; Phillips, Andrew W; Lin, Michelle

    2017-01-01

    Although continuing medical education (CME) presentations are common across health professions, it is unknown whether slide design is independently associated with audience evaluations of the speaker. Based on the conceptual framework of Mayer's theory of multimedia learning, this study aimed to determine whether image use and text density in presentation slides are associated with overall speaker evaluations. This retrospective analysis of six sequential CME conferences (two annual emergency medicine conferences over a three-year period) used a mixed linear regression model to assess whether post-conference speaker evaluations were associated with image fraction (percentage of image-based slides per presentation) and text density (number of words per slide). A total of 105 unique lectures were given by 49 faculty members, and 1,222 evaluations (70.1% response rate) were available for analysis. On average, 47.4% (SD=25.36) of slides had at least one educationally-relevant image (image fraction). Image fraction significantly predicted overall higher evaluation scores [F(1, 100.676)=6.158, p=0.015] in the mixed linear regression model. The mean (SD) text density was 25.61 (8.14) words/slide but was not a significant predictor [F(1, 86.293)=0.55, p=0.815]. Of note, the individual speaker [χ 2 (1)=2.952, p=0.003] and speaker seniority [F(3, 59.713)=4.083, p=0.011] significantly predicted higher scores. This is the first published study to date assessing the linkage between slide design and CME speaker evaluations by an audience of practicing clinicians. The incorporation of images was associated with higher evaluation scores, in alignment with Mayer's theory of multimedia learning. Contrary to this theory, however, text density showed no significant association, suggesting that these scores may be multifactorial. Professional development efforts should focus on teaching best practices in both slide design and presentation skills.

  16. A Category Based Threat Evaluation Model Using Platform Kinematics Data

    Directory of Open Access Journals (Sweden)

    Mustafa Çöçelli

    2017-08-01

    Full Text Available Command and control (C2 systems direct operators to make accurate decisions in the stressful atmosphere of the battlefield at the earliest. There are powerful tools that fuse various instant piece of information and brings summary of those in front of operators. Threat evaluation is one of the important fusion method that provides these assistance to military people. However, C2 systems could be deprived of valuable data source due to the absence of capable equipment. This situation has a bad unfavorable influence on the quality of tactical picture in front of C2 operators. In this paper, we study on the threat evaluation model that take into account these deficiencies. Our method extracts threat level of various targets mostly from their kinematics in two dimensional space. In the meantime, classification of entities around battlefield is unavailable. Only, category of targets are determined as a result of sensors process, which is the information of whether entities belong to air or surface environment. Hereby, threat evaluation model is consist of three fundamental steps that runs on entities belongs to different environment separately: the extraction of threat assessment cues, threat selection based on Bayesian Inference and the calculation of threat assessment rating. We have evaluated performance of proposed model by simulating a set of synthetic scenarios.

  17. Evaluation of a Hospital-Based Pneumonia Nurse Navigator Program.

    Science.gov (United States)

    Seldon, Lisa E; McDonough, Kelly; Turner, Barbara; Simmons, Leigh Ann

    2016-12-01

    The aim of this study is to evaluate the effectiveness of a hospital-based pneumonia nurse navigator program. This study used a retrospective, formative evaluation. Data of patients admitted from January 2012 through December 2014 to a large community hospital with a primary or secondary diagnosis of pneumonia, excluding aspiration pneumonia, were used. Data included patient demographics, diagnoses, insurance coverage, core measures, average length of stay (ALOS), disposition, readmission rate, financial outcomes, and patient barriers to care were collected. Descriptive statistics and parametric testing were used to analyze data. Core measure performance was sustained at the 90th percentile 2 years after the implementation of the navigator program. The ALOS did not decrease to established benchmarks; however, the SD for ALOS decreased by nearly half after implementation of the navigator program, suggesting the program decreased the number and length of extended stays. Charges per case decreased by 21% from 2012 to 2014. Variable costs decreased by 4% over a 2-year period, which increased net profit per case by 5%. Average readmission payments increased by 8% from 2012 to 2014, and the net revenue per case increased by 8.3%. The pneumonia nurse navigator program may improve core measures, reduce ALOS, and increase net revenue. Future evaluations are necessary to substantiate these findings and optimize the cost and quality performance of navigator programs.

  18. Relevance-based evaluation of alignment approaches: The OAEI2007 food task revisited

    NARCIS (Netherlands)

    Hage, W.R. van; Kolb, H.; Schreiber, G.

    2008-01-01

    Current state-of-the-art ontology-alignment evaluation methods are based on the assumption that alignment relations come in two flavors: correct and incorrect. Some alignment systems find more correct mappings than others and hence, by this assumption, they perform better. In practical applications

  19. Development and Implementation of a Web-based Evaluation System for an Internal Medicine Residency Program.

    Science.gov (United States)

    Rosenberg, Mark E.; Watson, Kathleen; Paul, Jeevan; Miller, Wesley; Harris, Ilene; Valdivia, Tomas D.

    2001-01-01

    Describes the development and implementation of a World Wide Web-based electronic evaluation system for the internal medicine residency program at the University of Minnesota. Features include automatic entry of evaluations by faculty or students into a database, compliance tracking, reminders, extensive reporting capabilities, automatic…

  20. Process Design and Evaluation for Chemicals Based on Renewable Resources

    DEFF Research Database (Denmark)

    Fu, Wenjing

    . In addition, another characteristic of chemicals based on renewable feedstocks is that many alternative technologies and possible routes exist, resulting in many possible process flowsheets. The challenge for process engineers is then to choose between possible process routes and alternative technologies...... development of chemicals based on renewable feedstocks. As an example, this thesis especially focuses on applying the methodology in process design and evaluation of the synthesis of 5-hydroxymethylfurfural (HMF) from the renewable feedstock glucose/fructose. The selected example is part of the chemoenzymatic......One of the key steps in process design is choosing between alternative technologies, especially for processes producing bulk and commodity chemicals. Recently, driven by the increasing oil prices and diminishing reserves, the production of bulk and commodity chemicals from renewable feedstocks has...

  1. Research on image complexity evaluation method based on color information

    Science.gov (United States)

    Wang, Hao; Duan, Jin; Han, Xue-hui; Xiao, Bo

    2017-11-01

    In order to evaluate the complexity of a color image more effectively and find the connection between image complexity and image information, this paper presents a method to compute the complexity of image based on color information.Under the complexity ,the theoretical analysis first divides the complexity from the subjective level, divides into three levels: low complexity, medium complexity and high complexity, and then carries on the image feature extraction, finally establishes the function between the complexity value and the color characteristic model. The experimental results show that this kind of evaluation method can objectively reconstruct the complexity of the image from the image feature research. The experimental results obtained by the method of this paper are in good agreement with the results of human visual perception complexity,Color image complexity has a certain reference value.

  2. [Ecosystem services evaluation based on geographic information system and remote sensing technology: a review].

    Science.gov (United States)

    Li, Wen-Jie; Zhang, Shi-Huang; Wang, Hui-Min

    2011-12-01

    Ecosystem services evaluation is a hot topic in current ecosystem management, and has a close link with human beings welfare. This paper summarized the research progress on the evaluation of ecosystem services based on geographic information system (GIS) and remote sensing (RS) technology, which could be reduced to the following three characters, i. e., ecological economics theory is widely applied as a key method in quantifying ecosystem services, GIS and RS technology play a key role in multi-source data acquisition, spatiotemporal analysis, and integrated platform, and ecosystem mechanism model becomes a powerful tool for understanding the relationships between natural phenomena and human activities. Aiming at the present research status and its inadequacies, this paper put forward an "Assembly Line" framework, which was a distributed one with scalable characteristics, and discussed the future development trend of the integration research on ecosystem services evaluation based on GIS and RS technologies.

  3. Generic FMS Platform for Evaluation of Autonomous Trajectory-Based Operation Concepts, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — The objective of the Phase II work is to develop a generic, advanced Flight Management System (FMS) for the evaluation of autonomous 4D-trajectory based operations...

  4. Comprehensive benefit analysis of regional water resources based on multi-objective evaluation

    Science.gov (United States)

    Chi, Yixia; Xue, Lianqing; Zhang, Hui

    2018-01-01

    The purpose of the water resources comprehensive benefits analysis is to maximize the comprehensive benefits on the aspects of social, economic and ecological environment. Aiming at the defects of the traditional analytic hierarchy process in the evaluation of water resources, it proposed a comprehensive benefit evaluation of social, economic and environmental benefits index from the perspective of water resources comprehensive benefit in the social system, economic system and environmental system; determined the index weight by the improved fuzzy analytic hierarchy process (AHP), calculated the relative index of water resources comprehensive benefit and analyzed the comprehensive benefit of water resources in Xiangshui County by the multi-objective evaluation model. Based on the water resources data in Xiangshui County, 20 main comprehensive benefit assessment factors of 5 districts belonged to Xiangshui County were evaluated. The results showed that the comprehensive benefit of Xiangshui County was 0.7317, meanwhile the social economy has a further development space in the current situation of water resources.

  5. The fast iris image clarity evaluation based on Tenengrad and ROI selection

    Science.gov (United States)

    Gao, Shuqin; Han, Min; Cheng, Xu

    2018-04-01

    In iris recognition system, the clarity of iris image is an important factor that influences recognition effect. In the process of recognition, the blurred image may possibly be rejected by the automatic iris recognition system, which will lead to the failure of identification. Therefore it is necessary to evaluate the iris image definition before recognition. Considered the existing evaluation methods on iris image definition, we proposed a fast algorithm to evaluate the definition of iris image in this paper. In our algorithm, firstly ROI (Region of Interest) is extracted based on the reference point which is determined by using the feature of the light spots within the pupil, then Tenengrad operator is used to evaluate the iris image's definition. Experiment results show that, the iris image definition algorithm proposed in this paper could accurately distinguish the iris images of different clarity, and the algorithm has the merit of low computational complexity and more effectiveness.

  6. Factors that affect implementation of web-based faculty evaluation forms: residents' perspectives from a developing country.

    Science.gov (United States)

    Ibrahim, S H; Ali, S K; Sadaf, S

    2010-08-01

    A web-based evaluation system for residents to provide feedback on faculty was piloted in four training programs at the Aga Khan University prior to institution-wide implementation. Of the four programs, less than 50% of forms were submitted by residents of three programs while more than 70% of forms were submitted by the residents of one program. This study was conducted to identify reasons for the varying participation rates of the four programs with a view to improving the system. A qualitative approach was employed using focus group discussions (FGDs). Volunteers were invited and three groups of eight to ten residents each were formed. Participants for FGDs were selected from all residency years. FGDs were used to identify residents' perceptions regarding the web-based faculty evaluation system and to identify residents' problems and concerns with completing the web-based faculty evaluating forms. Technical issues in completing and submitting the forms online were identified to be the main deterrents to completing the evaluation forms. Non-accessibility of a resource person for resolving technical problems with the software and the burden of taking time out to complete the forms were considered as limiting factors by many residents. Residents recommended a focused orientation session to the new system within the departments. Residents' confidence and support are key to promoting adequate participation in web-based evaluations. Focused orientation sessions, reinforcement, reminders, assurances of confidentiality, and removal of technical glitches should help to improve resident participation.

  7. Real-time threat evaluation in a ground based air defence environment

    Directory of Open Access Journals (Sweden)

    JN Roux

    2008-06-01

    Full Text Available In a military environment a ground based air defence operator is required to evaluate the tactical situation in real-time and protect Defended Assets (DAs on the ground against aerial threats by assigning available Weapon Systems (WSs to engage enemy aircraft. Since this aerial environment requires rapid operational planning and decision making in stress situations, the associated responsibilities are typically divided between a number of operators and computerized systems that aid these operators during the decision making processes. One such a Decision Support System (DSS, a threat evaluation and weapon assignment system, assigns threat values to aircraft (with respect to DAs in real-time and uses these values to propose possible engagements of observed enemy aircraft by anti-aircraft WSs. In this paper a design of the threat evaluation part of such a DSS is put forward. The design follows the structured approach suggested in [Roux JN & van Vuuren JH, 2007, Threat evaluation and weapon assignment decision support: A review of the state of the art, ORiON, 23(2, pp. 151-187], phasing in a suite of increasingly complex qualitative and quantitative model components as more (reliable data become available.

  8. Process service quality evaluation based on Dempster-Shafer theory and support vector machine.

    Science.gov (United States)

    Pei, Feng-Que; Li, Dong-Bo; Tong, Yi-Fei; He, Fei

    2017-01-01

    Human involvement influences traditional service quality evaluations, which triggers an evaluation's low accuracy, poor reliability and less impressive predictability. This paper proposes a method by employing a support vector machine (SVM) and Dempster-Shafer evidence theory to evaluate the service quality of a production process by handling a high number of input features with a low sampling data set, which is called SVMs-DS. Features that can affect production quality are extracted by a large number of sensors. Preprocessing steps such as feature simplification and normalization are reduced. Based on three individual SVM models, the basic probability assignments (BPAs) are constructed, which can help the evaluation in a qualitative and quantitative way. The process service quality evaluation results are validated by the Dempster rules; the decision threshold to resolve conflicting results is generated from three SVM models. A case study is presented to demonstrate the effectiveness of the SVMs-DS method.

  9. Evaluation Strategy

    DEFF Research Database (Denmark)

    Coto Chotto, Mayela; Wentzer, Helle; Dirckinck-Holmfeld, Lone

    2009-01-01

    The paper presents an evaluation strategy based on deliberate ideals and principles of dialogue design. The evaluation strategy is based on experiential phenomenology taking the point of departure for design and evaluation processes in the experienced practitioners themselves. The article present...... the evaluation strategy and methodology of a research project Making Online Path to Enter new Markets, MOPEM. It is an EU-research project with partners from different Educational Institutions of Technology and Business in five European Countries.......The paper presents an evaluation strategy based on deliberate ideals and principles of dialogue design. The evaluation strategy is based on experiential phenomenology taking the point of departure for design and evaluation processes in the experienced practitioners themselves. The article presents...

  10. Investigation of ageing status assessment and lifetime evaluation based on actual operation conditions of QNPC NPP

    International Nuclear Information System (INIS)

    Huilie, S.; Chun, G.; Hongyun, L.; Yinqiang, C.; Jun, T.; Wenbing, W.

    2009-01-01

    Qinshan NPP has been successfully operated for over 18 years with 30 year's design life. For 2nd PSR preparation and life extension strategies, a comprehensive status assessment and lifetime evaluation project is performed by NPP and SG research organization (CNPO). Assessment is subjects to main degradation mechanism of SG materials, including tube IGA/IGSCC tube pitting, fatigue of pressure boundary. Based on two primary functions of PWR steam generator, a comprehensive lifetime evaluation system and indicators has been established for keeping structural integrity of SG pressure boundary and thermal output performance. A series of specific assessment activities are implemented for defining actual ageing status and estimating safety and function margin of SG, including SG impurities hideout return analysis, fatigue evaluation of feedwater pipes based thermal stratification number simulation, fatigue evaluation of pressure boundary based on actual transition records, structure integrity assessment for lower chamber with defect, tube fouling analysis and trending etc. Assessment results shows, even extending operation to 50 years, SG would still keep sufficient safety and function margin, SG is not the neck of NPP life extension. (author)

  11. Evaluating the Accuracy of Results for Teacher Implemented Trial-Based Functional Analyses.

    Science.gov (United States)

    Rispoli, Mandy; Ninci, Jennifer; Burke, Mack D; Zaini, Samar; Hatton, Heather; Sanchez, Lisa

    2015-09-01

    Trial-based functional analysis (TBFA) allows for the systematic and experimental assessment of challenging behavior in applied settings. The purposes of this study were to evaluate a professional development package focused on training three Head Start teachers to conduct TBFAs with fidelity during ongoing classroom routines. To assess the accuracy of the TBFA results, the effects of a function-based intervention derived from the TBFA were compared with the effects of a non-function-based intervention. Data were collected on child challenging behavior and appropriate communication. An A-B-A-C-D design was utilized in which A represented baseline, and B and C consisted of either function-based or non-function-based interventions counterbalanced across participants, and D represented teacher implementation of the most effective intervention. Results showed that the function-based intervention produced greater decreases in challenging behavior and greater increases in appropriate communication than the non-function-based intervention for all three children. © The Author(s) 2015.

  12. A New Method of Reliability Evaluation Based on Wavelet Information Entropy for Equipment Condition Identification

    International Nuclear Information System (INIS)

    He, Z J; Zhang, X L; Chen, X F

    2012-01-01

    Aiming at reliability evaluation of condition identification of mechanical equipment, it is necessary to analyze condition monitoring information. A new method of reliability evaluation based on wavelet information entropy extracted from vibration signals of mechanical equipment is proposed. The method is quite different from traditional reliability evaluation models that are dependent on probability statistics analysis of large number sample data. The vibration signals of mechanical equipment were analyzed by means of second generation wavelet package (SGWP). We take relative energy in each frequency band of decomposed signal that equals a percentage of the whole signal energy as probability. Normalized information entropy (IE) is obtained based on the relative energy to describe uncertainty of a system instead of probability. The reliability degree is transformed by the normalized wavelet information entropy. A successful application has been achieved to evaluate the assembled quality reliability for a kind of dismountable disk-drum aero-engine. The reliability degree indicates the assembled quality satisfactorily.

  13. Evaluating performances of simplified physically based landslide susceptibility models.

    Science.gov (United States)

    Capparelli, Giovanna; Formetta, Giuseppe; Versace, Pasquale

    2015-04-01

    Rainfall induced shallow landslides cause significant damages involving loss of life and properties. Prediction of shallow landslides susceptible locations is a complex task that involves many disciplines: hydrology, geotechnical science, geomorphology, and statistics. Usually to accomplish this task two main approaches are used: statistical or physically based model. This paper presents a package of GIS based models for landslide susceptibility analysis. It was integrated in the NewAge-JGrass hydrological model using the Object Modeling System (OMS) modeling framework. The package includes three simplified physically based models for landslides susceptibility analysis (M1, M2, and M3) and a component for models verifications. It computes eight goodness of fit indices (GOF) by comparing pixel-by-pixel model results and measurements data. Moreover, the package integration in NewAge-JGrass allows the use of other components such as geographic information system tools to manage inputs-output processes, and automatic calibration algorithms to estimate model parameters. The system offers the possibility to investigate and fairly compare the quality and the robustness of models and models parameters, according a procedure that includes: i) model parameters estimation by optimizing each of the GOF index separately, ii) models evaluation in the ROC plane by using each of the optimal parameter set, and iii) GOF robustness evaluation by assessing their sensitivity to the input parameter variation. This procedure was repeated for all three models. The system was applied for a case study in Calabria (Italy) along the Salerno-Reggio Calabria highway, between Cosenza and Altilia municipality. The analysis provided that among all the optimized indices and all the three models, Average Index (AI) optimization coupled with model M3 is the best modeling solution for our test case. This research was funded by PON Project No. 01_01503 "Integrated Systems for Hydrogeological Risk

  14. Audio-based detection and evaluation of eating behavior using the smartwatch platform.

    Science.gov (United States)

    Kalantarian, Haik; Sarrafzadeh, Majid

    2015-10-01

    In recent years, smartwatches have emerged as a viable platform for a variety of medical and health-related applications. In addition to the benefits of a stable hardware platform, these devices have a significant advantage over other wrist-worn devices, in that user acceptance of watches is higher than other custom hardware solutions. In this paper, we describe signal-processing techniques for identification of chews and swallows using a smartwatch device׳s built-in microphone. Moreover, we conduct a survey to evaluate the potential of the smartwatch as a platform for monitoring nutrition. The focus of this paper is to analyze the overall applicability of a smartwatch-based system for food-intake monitoring. Evaluation results confirm the efficacy of our technique; classification was performed between apple and potato chip bites, water swallows, talking, and ambient noise, with an F-measure of 94.5% based on 250 collected samples. Copyright © 2015 Elsevier Ltd. All rights reserved.

  15. Research on Comprehensive Evaluation Method for Heating Project Based on Analytic Hierarchy Processing

    Science.gov (United States)

    Han, Shenchao; Yang, Yanchun; Liu, Yude; Zhang, Peng; Li, Siwei

    2018-01-01

    It is effective to reduce haze in winter by changing the distributed heat supply system. Thus, the studies on comprehensive index system and scientific evaluation method of distributed heat supply project are essential. Firstly, research the influence factors of heating modes, and an index system with multiple dimension including economic, environmental, risk and flexibility was built and all indexes were quantified. Secondly, a comprehensive evaluation method based on AHP was put forward to analyze the proposed multiple and comprehensive index system. Lastly, the case study suggested that supplying heat with electricity has great advantage and promotional value. The comprehensive index system of distributed heating supply project and evaluation method in this paper can evaluate distributed heat supply project effectively and provide scientific support for choosing the distributed heating project.

  16. Performance evaluation of vegetable-based oils in drilling austenitic stainless steel

    DEFF Research Database (Denmark)

    Belluco, Walter; De Chiffre, Leonardo

    2004-01-01

    breaking were recorded for each bore, and tool wear was measured at constant intervals. A commercial mineral-based oil was taken as reference product, and five vegetable-based cutting fluids at different levels of additivation were tested. All measured parameters were in agreement, confirming......The efficiency of six cutting oils was evaluated in drilling AISI 316L austenitic stainless steel using conventional HSS-Co tools by measurements of tool life, tool wear, cutting forces and chip formation. Seven tools were tested with each fluid to catastrophic failure. Cutting forces and chip...... to tool life testing. All vegetable-based fluids performed better than the reference product. The best performance was obtained with a cutting fluid yielding 177% increases in tool life and 7% reduction in thrust force. (C) 2003 Elsevier B.V. All rights reserved....

  17. Preliminary Evaluation of the Computer-Based Tactics Certification Course--Principles of War Module

    National Research Council Canada - National Science Library

    Pleban, Robert

    1997-01-01

    This report describes a portion of the U.S. Army Research Institute for the Behavioral and Social Sciences Infantry Forces Research Unit's work in the formative evaluation of the computer based Tactics Certification Course (TCC...

  18. Consumer-based technology for distribution of surgical videos for objective evaluation.

    Science.gov (United States)

    Gonzalez, Ray; Martinez, Jose M; Lo Menzo, Emanuele; Iglesias, Alberto R; Ro, Charles Y; Madan, Atul K

    2012-08-01

    The Global Operative Assessment of Laparoscopic Skill (GOALS) is one validated metric utilized to grade laparoscopic skills and has been utilized to score recorded operative videos. To facilitate easier viewing of these recorded videos, we are developing novel techniques to enable surgeons to view these videos. The objective of this study is to determine the feasibility of utilizing widespread current consumer-based technology to assist in distributing appropriate videos for objective evaluation. Videos from residents were recorded via a direct connection from the camera processor via an S-video output via a cable into a hub to connect to a standard laptop computer via a universal serial bus (USB) port. A standard consumer-based video editing program was utilized to capture the video and record in appropriate format. We utilized mp4 format, and depending on the size of the file, the videos were scaled down (compressed), their format changed (using a standard video editing program), or sliced into multiple videos. Standard available consumer-based programs were utilized to convert the video into a more appropriate format for handheld personal digital assistants. In addition, the videos were uploaded to a social networking website and video sharing websites. Recorded cases of laparoscopic cholecystectomy in a porcine model were utilized. Compression was required for all formats. All formats were accessed from home computers, work computers, and iPhones without difficulty. Qualitative analyses by four surgeons demonstrated appropriate quality to grade for these formats. Our preliminary results show promise that, utilizing consumer-based technology, videos can be easily distributed to surgeons to grade via GOALS via various methods. Easy accessibility may help make evaluation of resident videos less complicated and cumbersome.

  19. Competency-Based Evaluation in Higher Education--Design and Use of Competence Rubrics by University Educators

    Science.gov (United States)

    Velasco-Martínez, Leticia-Concepción; Tójar-Hurtado, Juan-Carlos

    2018-01-01

    Competency-based learning requires making changes in the higher education model in response to current socio-educational demands. Rubrics are an innovative educational tool for competence evaluation, for both students and educators. Ever since arriving at the university systems, the application of rubrics in evaluation programs has grown…

  20. Using an integrative mock-up simulation approach for evidence-based evaluation of operating room design prototypes.

    Science.gov (United States)

    Bayramzadeh, Sara; Joseph, Anjali; Allison, David; Shultz, Jonas; Abernathy, James

    2018-07-01

    This paper describes the process and tools developed as part of a multidisciplinary collaborative simulation-based approach for iterative design and evaluation of operating room (OR) prototypes. Full-scale physical mock-ups of healthcare spaces offer an opportunity to actively communicate with and to engage multidisciplinary stakeholders in the design process. While mock-ups are increasingly being used in healthcare facility design projects, they are rarely evaluated in a manner to support active user feedback and engagement. Researchers and architecture students worked closely with clinicians and architects to develop OR design prototypes and engaged clinical end-users in simulated scenarios. An evaluation toolkit was developed to compare design prototypes. The mock-up evaluation helped the team make key decisions about room size, location of OR table, intra-room zoning, and doors location. Structured simulation based mock-up evaluations conducted in the design process can help stakeholders visualize their future workspace and provide active feedback. Copyright © 2018 Elsevier Ltd. All rights reserved.

  1. A risk assessment approach to evaluating food safety based on product surveillance

    NARCIS (Netherlands)

    Notermans, S.; Nauta, M.J.; Jansen, J.; Jouve, J.L.; Mead, G.C.

    1998-01-01

    This paper outlines a risk assessment approach to food safety evaluation, which is based on testing a particular type of food, or group of similar foods, for relevant microbial pathogens. The results obtained are related to possible adverse effects on the health of consumers. The paper also gives an

  2. A Fuzzy-Based Fusion Method of Multimodal Sensor-Based Measurements for the Quantitative Evaluation of Eye Fatigue on 3D Displays

    Directory of Open Access Journals (Sweden)

    Jae Won Bang

    2015-05-01

    Full Text Available With the rapid increase of 3-dimensional (3D content, considerable research related to the 3D human factor has been undertaken for quantitatively evaluating visual discomfort, including eye fatigue and dizziness, caused by viewing 3D content. Various modalities such as electroencephalograms (EEGs, biomedical signals, and eye responses have been investigated. However, the majority of the previous research has analyzed each modality separately to measure user eye fatigue. This cannot guarantee the credibility of the resulting eye fatigue evaluations. Therefore, we propose a new method for quantitatively evaluating eye fatigue related to 3D content by combining multimodal measurements. This research is novel for the following four reasons: first, for the evaluation of eye fatigue with high credibility on 3D displays, a fuzzy-based fusion method (FBFM is proposed based on the multimodalities of EEG signals, eye blinking rate (BR, facial temperature (FT, and subjective evaluation (SE; second, to measure a more accurate variation of eye fatigue (before and after watching a 3D display, we obtain the quality scores of EEG signals, eye BR, FT and SE; third, for combining the values of the four modalities we obtain the optimal weights of the EEG signals BR, FT and SE using a fuzzy system based on quality scores; fourth, the quantitative level of the variation of eye fatigue is finally obtained using the weighted sum of the values measured by the four modalities. Experimental results confirm that the effectiveness of the proposed FBFM is greater than other conventional multimodal measurements. Moreover, the credibility of the variations of the eye fatigue using the FBFM before and after watching the 3D display is proven using a t-test and descriptive statistical analysis using effect size.

  3. Integrated Evaluation of the Potential Health Benefits of Einkorn-Based Breads

    Science.gov (United States)

    Antognoni, Fabiana; Mandrioli, Roberto; Di Nunzio, Mattia; Viadel, Blanca; Gallego, Elisa; Villalba, María Paz; Tomás-Cobos, Lidia; Taneyo Saa, Danielle Laure; Gianotti, Andrea

    2017-01-01

    Nowadays the high nutritional value of whole grains is recognized, and there is an increasing interest in the ancient varieties for producing wholegrain food products with enhanced nutritional characteristics. Among ancient crops, einkorn could represent a valid alternative. In this work, einkorn flours were analyzed for their content in carotenoids and in free and bound phenolic acids, and compared to wheat flours. The most promising flours were used to produce conventional and sourdough fermented breads. Breads were in vitro digested, and characterized before and after digestion. The four breads having the best characteristics were selected, and the product of their digestion was used to evaluate their anti-inflammatory effect using Caco-2 cells. Our results confirm the higher carotenoid levels in einkorn than in modern wheats, and the effectiveness of sourdough fermentation in maintaining these levels, despite the longer exposure to atmospheric oxygen. Moreover, in cultured cells einkorn bread evidenced an anti-inflammatory effect, although masked by the effect of digestive fluid. This study represents the first integrated evaluation of the potential health benefit of einkorn-based bakery products compared to wheat-based ones, and contributes to our knowledge of ancient grains. PMID:29137113

  4. Integrated Evaluation of the Potential Health Benefits of Einkorn-Based Breads

    Directory of Open Access Journals (Sweden)

    Fabiana Antognoni

    2017-11-01

    Full Text Available Nowadays the high nutritional value of whole grains is recognized, and there is an increasing interest in the ancient varieties for producing wholegrain food products with enhanced nutritional characteristics. Among ancient crops, einkorn could represent a valid alternative. In this work, einkorn flours were analyzed for their content in carotenoids and in free and bound phenolic acids, and compared to wheat flours. The most promising flours were used to produce conventional and sourdough fermented breads. Breads were in vitro digested, and characterized before and after digestion. The four breads having the best characteristics were selected, and the product of their digestion was used to evaluate their anti-inflammatory effect using Caco-2 cells. Our results confirm the higher carotenoid levels in einkorn than in modern wheats, and the effectiveness of sourdough fermentation in maintaining these levels, despite the longer exposure to atmospheric oxygen. Moreover, in cultured cells einkorn bread evidenced an anti-inflammatory effect, although masked by the effect of digestive fluid. This study represents the first integrated evaluation of the potential health benefit of einkorn-based bakery products compared to wheat-based ones, and contributes to our knowledge of ancient grains.

  5. Piloted Simulator Evaluation Results of Flight Physics Based Stall Recovery Guidance

    Science.gov (United States)

    Lombaerts, Thomas; Schuet, Stefan; Stepanyan, Vahram; Kaneshige, John; Hardy, Gordon; Shish, Kimberlee; Robinson, Peter

    2018-01-01

    In recent studies, it has been observed that loss of control in flight is the most frequent primary cause of accidents. A significant share of accidents in this category can be remedied by upset prevention if possible, and by upset recovery if necessary, in this order of priorities. One of the most important upsets to be recovered from is stall. Recent accidents have shown that a correct stall recovery maneuver remains a big challenge in civil aviation, partly due to a lack of pilot training. A possible strategy to support the flight crew in this demanding context is calculating a recovery guidance signal, and showing this signal in an intuitive way on one of the cockpit displays, for example by means of the flight director. Different methods for calculating the recovery signal, one based on fast model predictive control and another using an energy based approach, have been evaluated in four relevant operational scenarios by experienced commercial as well as test pilots in the Vertical Motion Simulator at NASA Ames Research Center. Evaluation results show that this approach could be able to assist the pilots in executing a correct stall recovery maneuver.

  6. The Value of Fidelity of Implementation Criteria to Evaluate School-Based Science Curriculum Innovations

    Science.gov (United States)

    Lee, Yew-Jin; Chue, Shien

    2013-10-01

    School-based curriculum innovations, including those in science education, are usually not adequately evaluated, if at all. Furthermore, current procedures and instruments for programme evaluations are often unable to support evidence-based decision-making. We suggest that adopting fidelity of implementation (FOI) criteria from healthcare research can both characterize and narrow the separation between programme intent and actual implementation, which is a mandatory stage of evaluation before determining overall programme value. We demonstrate how such a process could be applied by science educators using data from a secondary school in Singapore that had devised a new curriculum to promote interest, investigative processes, and knowledge in science. Results showed that there were ambivalent student responses to this programme, while there were high levels of science process skill instruction and close alignment with the intended lesson design. The implementation of this programme appeared to have a satisfactory overall level of FOI, but we also detected tensions between programme intent and everyday classroom teaching. If we want to advance science education, then our argument is that applying FOI criteria is necessary when evaluating all curricular innovations, not just those that originate from schools.

  7. Experimental evaluation of optimal Vehicle Dynamic Control based on the State Dependent Riccati Equation technique

    NARCIS (Netherlands)

    Alirezaei, M.; Kanarachos, S.A.; Scheepers, B.T.M.; Maurice, J.P.

    2013-01-01

    Development and experimentally evaluation of an optimal Vehicle Dynamic Control (VDC) strategy based on the State Dependent Riccati Equation (SDRE) control technique is presented. The proposed nonlinear controller is based on a nonlinear vehicle model with nonlinear tire characteristics. A novel

  8. Prospective evaluation of fluorouracil chemotherapy based on the genetic makeup of colorectal cancer

    OpenAIRE

    Carethers, J M

    2006-01-01

    Evaluation of 5‐fluorouracil chemotherapy and survival, based on mismatch repair (MMR) status, indicates that patients with MMR proficient colorectal tumours benefit from 5‐fluorouracil treatment while patients with MMR deficient tumours do not

  9. Evaluating assessment quality in competence-based education: A qualitative comparison of two frameworks

    NARCIS (Netherlands)

    Baartman, Liesbeth; Bastiaens, Theo; Kirschner, Paul A.; Van der Vleuten, Cees

    2009-01-01

    Baartman, L. K. J., Bastiaens, T. J., Kirschner, P. A., & Van der Vleuten, C. P. M. (2007). Evaluation assessment quality in competence-based education: A qualitative comparison of two frameworks. Educational Research Review, 2, 114-129.

  10. Vibration-based monitoring for performance evaluation of flexible civil structures in Japan

    Science.gov (United States)

    FUJINO, Yozo

    2018-01-01

    The vibration-based monitoring of flexible civil structures and performance evaluation from this monitoring are reviewed, with an emphasis on research and practice in Japan and the author’s experiences. Some new findings and unexpected vibrations from the monitoring of real bridges and buildings are reported to emphasize the importance of monitoring. Future developments and applications of vibration-based monitoring to civil infrastructure management are also described. Many examples are taken from the author’s past 30 years’ experience of research on bridge dynamics. PMID:29434082

  11. Utilization of two web-based continuing education courses evaluated by Markov chain model.

    Science.gov (United States)

    Tian, Hao; Lin, Jin-Mann S; Reeves, William C

    2012-01-01

    To evaluate the web structure of two web-based continuing education courses, identify problems and assess the effects of web site modifications. Markov chain models were built from 2008 web usage data to evaluate the courses' web structure and navigation patterns. The web site was then modified to resolve identified design issues and the improvement in user activity over the subsequent 12 months was quantitatively evaluated. Web navigation paths were collected between 2008 and 2010. The probability of navigating from one web page to another was analyzed. The continuing education courses' sequential structure design was clearly reflected in the resulting actual web usage models, and none of the skip transitions provided was heavily used. The web navigation patterns of the two different continuing education courses were similar. Two possible design flaws were identified and fixed in only one of the two courses. Over the following 12 months, the drop-out rate in the modified course significantly decreased from 41% to 35%, but remained unchanged in the unmodified course. The web improvement effects were further verified via a second-order Markov chain model. The results imply that differences in web content have less impact than web structure design on how learners navigate through continuing education courses. Evaluation of user navigation can help identify web design flaws and guide modifications. This study showed that Markov chain models provide a valuable tool to evaluate web-based education courses. Both the results and techniques in this study would be very useful for public health education and research specialists.

  12. THE EVALUATION OF COUNSELING AND GUIDANCE SERVICES BASED ON TEACHER VIEWS AND THEIR PREDICTION BASED ON SOME VARIABLES

    Directory of Open Access Journals (Sweden)

    Fulya Yuksel-Sahin

    2009-01-01

    Full Text Available This study evaluated psychological counseling and guidance services based on elementary and secondary education teachers’ views. Participants were 204 teachers. “School Guidance Services Scale” and “Teacher Personal Information Form” were used for gathering the necessary information. Percentage calculations and multiple regression analysis were used for data analysis. The results showed that teachers listed the guidance services from the most utilized to the least as follows: consultation, counseling, information gathering and outreach, appraisal, orientation, placement, research and evaluation public and family relations and follow-up services. Results of this study showed that overall an approximately 46% of all counseling and guidance services were offered. Moreover, according to the results of the study, the grade being taught and holding the view that schools should definitely have a school counselor were significant predictors of teachers’ evaluation of counseling and guidance services. However, taking counseling and guidance lessons during undergraduate studies, the length of service and gender were not significant predictors of teachers’ evaluation of counseling and guidance services.

  13. Process service quality evaluation based on Dempster-Shafer theory and support vector machine.

    Directory of Open Access Journals (Sweden)

    Feng-Que Pei

    Full Text Available Human involvement influences traditional service quality evaluations, which triggers an evaluation's low accuracy, poor reliability and less impressive predictability. This paper proposes a method by employing a support vector machine (SVM and Dempster-Shafer evidence theory to evaluate the service quality of a production process by handling a high number of input features with a low sampling data set, which is called SVMs-DS. Features that can affect production quality are extracted by a large number of sensors. Preprocessing steps such as feature simplification and normalization are reduced. Based on three individual SVM models, the basic probability assignments (BPAs are constructed, which can help the evaluation in a qualitative and quantitative way. The process service quality evaluation results are validated by the Dempster rules; the decision threshold to resolve conflicting results is generated from three SVM models. A case study is presented to demonstrate the effectiveness of the SVMs-DS method.

  14. COMPUTER EVALUATION OF SKILLS FORMATION QUALITY IN THE IMPLEMENTATION OF COMPETENCE-BASED APPROACH TO LEARNING

    Directory of Open Access Journals (Sweden)

    Vitalia A. Zhuravleva

    2014-01-01

    Full Text Available The article deals with the problem of effective organization of skills forming as an important part of the competence approach in education, implemented via educational standards of new generation. The solution of the problem suggests using of computer tools to assess the quality of skills formation and abilities based on the proposed model of the problem. This paper proposes an approach to creating an assessing model of the level of skills formation in knowledge management systems based on mathematical modeling methods. Attention is paid to the evaluation strategy and technology of assessment, which is based on the use of rules of fuzzy mathematics. Algorithmic implementation of the proposed model of evaluation of the quality of skills development is shown as well. 

  15. Development of a Cloud Computing-Based Pier Type Port Structure Stability Evaluation Platform Using Fiber Bragg Grating Sensors.

    Science.gov (United States)

    Jo, Byung Wan; Jo, Jun Ho; Khan, Rana Muhammad Asad; Kim, Jung Hoon; Lee, Yun Sung

    2018-05-23

    Structure Health Monitoring is a topic of great interest in port structures due to the ageing of structures and the limitations of evaluating structures. This paper presents a cloud computing-based stability evaluation platform for a pier type port structure using Fiber Bragg Grating (FBG) sensors in a system consisting of a FBG strain sensor, FBG displacement gauge, FBG angle meter, gateway, and cloud computing-based web server. The sensors were installed on core components of the structure and measurements were taken to evaluate the structures. The measurement values were transmitted to the web server via the gateway to analyze and visualize them. All data were analyzed and visualized in the web server to evaluate the structure based on the safety evaluation index (SEI). The stability evaluation platform for pier type port structures involves the efficient monitoring of the structures which can be carried out easily anytime and anywhere by converging new technologies such as cloud computing and FBG sensors. In addition, the platform has been successfully implemented at “Maryang Harbor” situated in Maryang-Meyon of Korea to test its durability.

  16. Exploration of Urban Spatial Planning Evaluation Based on Humanland Harmony

    Science.gov (United States)

    Hu, X. S.; Ma, Q. R.; Liang, W. Q.; Wang, C. X.; Xiong, X. Q.; Han, X. H.

    2017-09-01

    This study puts forward a new concept, "population urbanization level forecast - driving factor analysis - urban spatial planning analysis" for achieving efficient and intensive development of urbanization considering human-land harmony. We analyzed big data for national economic and social development, studied the development trends of population urbanization and its influencing factors using the grey system model in Chengmai county of Hainan province, China. In turn, we calculated the population of Chengmai coming years based on the forecasting urbanization rate and the corresponding amount of urban construction land, and evaluated the urban spatial planning with GIS spatial analysis method in the study area. The result shows that the proposed concept is feasible for evaluation of urban spatial planning, and is meaningful for guiding the rational distribution of urban space, controlling the scale of development, improving the quality of urbanization and thus promoting highly-efficient and intensive use of limited land resource.

  17. Development and Evaluation of Cefadroxil Drug Loaded Biopolymeric Films Based on Chitosan-Furfural Schiff Base

    Science.gov (United States)

    Dixit, Ritu B.; Uplana, Rahul A.; Patel, Vishnu A.; Dixit, Bharat C.; Patel, Tarosh S.

    2010-01-01

    Cefadroxil drug loaded biopolymeric films of chitosan-furfural schiff base were prepared by reacting chitosan with furfural in presence of acetic acid and perchloric acid respectively for the external use. Prepared films were evaluated for their strength, swelling index, thickness, drug content, uniformity, tensile strength, percent elongation, FTIR spectral analysis and SEM. The results of in vitro diffusion studies revealed that the films exhibited enhanced drug diffusion as compared to the films prepared using untreated chitosan. The films also demonstrated good to moderate antibacterial activities against selective gram positive and gram negative bacteria. PMID:21179325

  18. Semantics-Based Compiling: A Case Study in Type-Directed Partial Evaluation

    DEFF Research Database (Denmark)

    Danvy, Olivier; Vestergaard, René

    1996-01-01

    , block-structured, higher-order, call-by-value, allows subtyping, and obeys stack discipline. It is bigger than what is usually reported in the literature on semantics-based compiling and partial evaluation. Our compiling technique uses the first Futamura projection, i.e., we compile programs......-directed compilation, in the spirit of Scott and Strachey. Our conclusion is that lambda-calculus normalization suffices for compiling by specializing an interpreter....

  19. Semantics-based compiling: A case study in type-directed partial evaluation

    DEFF Research Database (Denmark)

    Danvy, Olivier; Vestergaard, René

    1996-01-01

    , block-structured, higher-order, call-by-value, allows subtyping, and obeys stack discipline. It is bigger than what is usually reported in the literature on semantics-based compiling and partial evaluation. Our compiling technique uses the first Futamura projection, i.e., we compile programs......-directed compilation, in the spirit of Scott and Strachey. Our conclusion is that lambda-calculus normalization suffices for compiling by specializing an interpreter....

  20. Stress evaluation of metallic material under steady state based on nonlinear critically refracted longitudinal wave

    Science.gov (United States)

    Mao, Hanling; Zhang, Yuhua; Mao, Hanying; Li, Xinxin; Huang, Zhenfeng

    2018-06-01

    This paper presents the study of applying the nonlinear ultrasonic wave to evaluate the stress state of metallic materials under steady state. The pre-stress loading method is applied to guarantee components with steady stress. Three kinds of nonlinear ultrasonic experiments based on critically refracted longitudinal wave are conducted on components which the critically refracted longitudinal wave propagates along x, x1 and x2 direction. Experimental results indicate the second and third order relative nonlinear coefficients monotonically increase with stress, and the normalized relationship is consistent with simplified dislocation models, which indicates the experimental result is logical. The combined ultrasonic nonlinear parameter is proposed, and three stress evaluation models at x direction are established based on three ultrasonic nonlinear parameters, which the estimation error is below 5%. Then two stress detection models at x1 and x2 direction are built based on combined ultrasonic nonlinear parameter, the stress synthesis method is applied to calculate the magnitude and direction of principal stress. The results show the prediction error is within 5% and the angle deviation is within 1.5°. Therefore the nonlinear ultrasonic technique based on LCR wave could be applied to nondestructively evaluate the stress of metallic materials under steady state which the magnitude and direction are included.

  1. The Evaluation of Teachers' Job Performance Based on Total Quality Management (TQM)

    Science.gov (United States)

    Shahmohammadi, Nayereh

    2017-01-01

    This study aimed to evaluate teachers' job performance based on total quality management (TQM) model. This was a descriptive survey study. The target population consisted of all primary school teachers in Karaj (N = 2917). Using Cochran formula and simple random sampling, 340 participants were selected as sample. A total quality management…

  2. Fuzzy Comprehensive Evaluation of Ecological Risk Based on Cloud Model: Taking Chengchao Iron Mine as Example

    Science.gov (United States)

    Ruan, Jinghua; Chen, Yong; Xiao, Xiao; Yong, Gan; Huang, Ranran; Miao, Zuohua

    2018-01-01

    Aimed at the fuzziness and randomness during the evaluation process, this paper constructed a fuzzy comprehensive evaluation method based on cloud model. The evaluation index system was established based on the inherent risk, present level and control situation, which had been proved to be able to convey the main contradictions of ecological risk in mine on the macro level, and be advantageous for comparison among mines. The comment sets and membership functions improved by cloud model could reflect the uniformity of ambiguity and randomness effectively. In addition, the concept of fuzzy entropy was introduced to further characterize the fuzziness of assessments results and the complexities of ecological problems in target mine. A practical example in Chengchao Iron Mine evidenced that, the assessments results can reflect actual situations appropriately and provide a new theoretic guidance for comprehensive ecological risk evaluation of underground iron mine.

  3. Shortening the Miles to the Milestones: Connecting EPA-Based Evaluations to ACGME Milestone Reports for Internal Medicine Residency Programs.

    Science.gov (United States)

    Choe, John H; Knight, Christopher L; Stiling, Rebekah; Corning, Kelli; Lock, Keli; Steinberg, Kenneth P

    2016-07-01

    The Next Accreditation System requires internal medicine training programs to provide the Accreditation Council for Graduate Medical Education (ACGME) with semiannual information about each resident's progress in 22 subcompetency domains. Evaluation of resident "trustworthiness" in performing entrustable professional activities (EPAs) may offer a more tangible assessment construct than evaluations based on expectations of usual progression toward competence. However, translating results from EPA-based evaluations into ACGME milestone progress reports has proven to be challenging because the constructs that underlay these two systems differ.The authors describe a process to bridge the gap between rotation-specific EPA-based evaluations and ACGME milestone reporting. Developed at the University of Washington in 2012 and 2013, this method involves mapping EPA-based evaluation responses to "milestone elements," the narrative descriptions within the columns of each of the 22 internal medicine subcompetencies. As faculty members complete EPA-based evaluations, the mapped milestone elements are automatically marked as "confirmed." Programs can maintain a database that tallies the number of times each milestone element is confirmed for a resident; these data can be used to produce graphical displays of resident progress along the internal medicine milestones.Using this count of milestone elements allows programs to bridge the gap between faculty assessments of residents based on rotation-specific observed activities and semiannual ACGME reports based on the internal medicine milestones. Although potentially useful for all programs, this method is especially beneficial to large programs where clinical competency committee members may not have the opportunity for direct observation of all residents.

  4. The Development of a Web-Based Urban Soundscape Evaluation System

    Science.gov (United States)

    Sudarsono, A. S.; Sarwono, J.

    2018-05-01

    Acoustic quality is one of the important aspects of urban design. It is usually evaluated based on how loud the urban environment is. However, this approach does not consider people’s perception of the urban acoustic environment. Therefore, a different method has been developed based on the perception of the acoustic environment using the concept of soundscape. Soundscape is defined as the acoustic environment perceived by people who are part of the environment. This approach considers the relationship between the sound source, the environment, and the people. The analysis of soundscape considers many aspects such as cultural aspects, people’s expectations, people’s experience of space, and social aspects. Soundscape affects many aspects of human life such as culture, health, and the quality of life. Urban soundscape management and planning must be integrated with the other aspect of urban design, both in the design and the improvement stages. The soundscape concept seeks to make the acoustic environment as pleasant as possible in a space with or without uncomfortable sound sources. Soundscape planning includes the design of physical features to achieve a positive perceptual outcome. It is vital to gather data regarding the relationship between humans and the components of a soundscape, e.g., sound sources, features of the physical environment, the functions of a space, and the expectation of the sound source. The data can be measured and gathered using several soundscape evaluation methods. Soundscape evaluation is usually conducted using in-situ surveys and laboratory experiments using a multi-speaker system. Although these methods have been validated and are widely used in soundscape analysis, there are some limitations in the application. The in-situ survey needs to be done at one time with many people at the same time because it is hard to replicate the acoustic environment. Conversely, the laboratory experiment does not have a problem with the

  5. Questionnaire-based evaluation of everyday competence in older adults

    Directory of Open Access Journals (Sweden)

    Tobias Kalisch

    2011-01-01

    lifestyle showed higher everyday competence than those with a sedentary lifestyle or subjects who needed care. Furthermore, the ECQ data showed a significant positive correlation between individual physical activity and everyday competence.Conclusion: The ECQ is a novel tool for the questionnaire-based evaluation of everyday competence among healthy subjects. By including leisure activities, it considers the changed living conditions of modern-day older adults.Keywords: successful aging, everyday competence, questionnaire-based evaluation

  6. Shear wave velocity-based evaluation and design of stone column improved ground for liquefaction mitigation

    Science.gov (United States)

    Zhou, Yanguo; Sun, Zhengbo; Chen, Jie; Chen, Yunmin; Chen, Renpeng

    2017-04-01

    The evaluation and design of stone column improvement ground for liquefaction mitigation is a challenging issue for the state of practice. In this paper, a shear wave velocity-based approach is proposed based on the well-defined correlations of liquefaction resistance (CRR)-shear wave velocity ( V s)-void ratio ( e) of sandy soils, and the values of parameters in this approach are recommended for preliminary design purpose when site specific values are not available. The detailed procedures of pre- and post-improvement liquefaction evaluations and stone column design are given. According to this approach, the required level of ground improvement will be met once the target V s of soil is raised high enough (i.e., no less than the critical velocity) to resist the given earthquake loading according to the CRR- V s relationship, and then this requirement is transferred to the control of target void ratio (i.e., the critical e) according to the V s- e relationship. As this approach relies on the densification of the surrounding soil instead of the whole improved ground and is conservative by nature, specific considerations of the densification mechanism and effect are given, and the effects of drainage and reinforcement of stone columns are also discussed. A case study of a thermal power plant in Indonesia is introduced, where the effectiveness of stone column improved ground was evaluated by the proposed V s-based method and compared with the SPT-based evaluation. This improved ground performed well and experienced no liquefaction during subsequent strong earthquakes.

  7. Mechanical strength evaluation of the glass base material in the JRR-3 neutron guide tube

    Energy Technology Data Exchange (ETDEWEB)

    Kobayashi, Tetsuya [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    2003-02-01

    The lifetime of the thermal neutron guide tube installed JRR-3 was investigated after 6 years from their first installation. And it was confirmed that a crack had been piercing into the glass base material of the side plate of the neutron guide tube. The cause of the crack was estimated as a static fatigue of the guide tube where an inside of the tube had been evacuated and stressed as well as an embrittlement of the glass base material by gamma ray irradiation. In this report, we evaluate the mechanical strength of the glass base material and estimate the time when the base material gets fatigue fracture. Furthermore, we evaluate a lifetime of the neutron guide tube and confirm the validity of update timing in 2000 and 2001 when the thermal neutron guide tubes T1 and T2 were exchanged into those using the super mirror. (author)

  8. Reliability Evaluation for the Surface to Air Missile Weapon Based on Cloud Model

    Directory of Open Access Journals (Sweden)

    Deng Jianjun

    2015-01-01

    Full Text Available The fuzziness and randomness is integrated by using digital characteristics, such as Expected value, Entropy and Hyper entropy. The cloud model adapted to reliability evaluation is put forward based on the concept of the surface to air missile weapon. The cloud scale of the qualitative evaluation is constructed, and the quantitative variable and the qualitative variable in the system reliability evaluation are corresponded. The practical calculation result shows that it is more effective to analyze the reliability of the surface to air missile weapon by this way. The practical calculation result also reflects the model expressed by cloud theory is more consistent with the human thinking style of uncertainty.

  9. Development and evaluation of a decision-based simulation for assessment of team skills.

    Science.gov (United States)

    Andrew, Brandon; Plachta, Stephen; Salud, Lawrence; Pugh, Carla M

    2012-08-01

    There is a need to train and evaluate a wide variety of nontechnical surgical skills. The goal of this project was to develop and evaluate a decision-based simulation to assess team skills. The decision-based exercise used our previously validated Laparoscopic Ventral Hernia simulator and a newly developed team evaluation survey. Five teams of 3 surgical residents (N = 15) were tasked with repairing a 10 × 10-cm right upper quadrant hernia. During the simulation, independent observers (N = 6) completed a 6-item survey assessing: (1) work quality; (2) communication; and (3) team effectiveness. After the simulation, team members self-rated their performance by using the same survey. Survey reliability revealed a Cronbach's alpha of r = .811. Significant differences were found when we compared team members' (T) and observers' (O) ratings for communication (T = 4.33/5.00 vs O = 3.00/5.00, P work quality (T = 4.33/5.00 vs O = 3.33/5.00, P performance on the simulator. Our current and previous work provides strong evidence that nontechnical and team related skills can be assessed without simulating a crisis situation. Copyright © 2012 Mosby, Inc. All rights reserved.

  10. Evaluation of preparation methods for MS-based analysis of intestinal epithelial cell proteomes

    DEFF Research Database (Denmark)

    Hesselager, Marianne Overgaard; Codrea, Marius Cosmin; Bendixen, Emøke

    2015-01-01

    analyzed by LC and electrospray QTOF-MS. The methods were evaluated according to efficiency, purity, transmembrane protein recovery, as well as for suitability to large-scale preparations. Our data clearly demonstrate that mucosal shaving is by far the best-suited method for in-depth MS analysis in terms...... are low in abundance, and large amounts of sample is needed for their preparation and for undertaking MS-based analysis. The aim of this study was to evaluate three different methods for isolation and preparation of pig intestinal epithelial cells for MS-based analysis of the proteome. Samples were...... of ease and speed of sample preparation, as well as protein recovery. In comparison, more gentle methods where intestinal epithelial cells are harvested by shaking are more time consuming, result in lower protein yield, and are prone to increased technical variation due to multiple steps involved....

  11. Self-Evaluated Effects of Web-Based Portfolio Assessment System for Various Student Motivation Levels

    Science.gov (United States)

    Chang, Chi-Cheng

    2009-01-01

    The purpose of this study was to explore the self-evaluated effects of a web-based portfolio assessment system on various categories of students of motivation. The subjects for this study were the students of two computer classes in a Junior High School. The experimental group used the web-based portfolio assessment system whereas the control…

  12. Developing Students' Creative Self-Efficacy Based on Design-Thinking: Evaluation of an Elective University Course

    Science.gov (United States)

    Ohly, Sandra; Plückthun, Laura; Kissel, Dorothea

    2017-01-01

    The development of novel and useful ideas is a process that can be described in multiple steps, including information gathering, generating ideas and evaluating ideas. We evaluated a university course that was developed based on design thinking principles which employ similar steps. Our results show that the course was not effective in enhancing…

  13. A framework for evaluating community-based physical activity promotion programmes in Latin America.

    Science.gov (United States)

    Schmid, Thomas L; Librett, John; Neiman, Andrea; Pratt, Michael; Salmon, Art

    2006-01-01

    A growing interest in promoting physical activity through multi-sectoral community-based programmes has highlighted the need for effective programme evaluation. Meeting in Rio de Janeiro, an international workgroup of behavioural, medical, public health and other scientists and practitioners endorsed the principle of careful evaluation of all programmes and in a consensus process developed the Rio de Janeiro Recommendations for Evaluation of Physical Activity Interventions". Among these recommendations and principles were that when possible, evaluation should 'built into' the programme from the beginning. The workgroup also called for adequate funding for evaluation, setting a goal of about 10% of programme resources for evaluation. The group also determined that evaluations should be developed in conjunction with and the results shared with all appropriate stakeholders in the programme; evaluations should be guided by ethical standards such as those proposed by the American Evaluation Association and should assess programme processes as well as outcomes; evaluation outcomes should be used to revise and refine ongoing programmes and guide decisions about programme continuation or expansion. It was also recognised that additional training in programme evaluation is needed and the Centers for Disease Control and Prevention's Physical Activity Evaluation Handbook could be easily adapted for use in culturally diverse communities, especially in Latin America. This paper describes a 6-step evaluation process and provides the full set of recommendations from the Rio de Janeiro Workgroup. The handbook has been translated and additional case studies from Colombia and Brazil have been added. Spanish and Portuguese language editions of the Evaluation Handbook are available from the Centers for Disease Control and Prevention, Physical Activity and Health Branch.

  14. Developing an Android-Based Patient Decision Aid Based on Ottawa Standards for Patients After Kidney Transplant and Its Usability Evaluation.

    Science.gov (United States)

    Zare Moayedi, Mahboobeh; Aslani, Azam; Fakhrahmad, Mostafa; Ezzatzadegan J, Shahrokh

    2018-01-01

    This study was conducted to develop an android based patient decision aid (PDA) as a self-care instrument for patients after kidney transplant and its usability evaluation. In this study, the systematic development process of Android-based self-care application for patients after kidney transplant based on Ottawa standard was included: scoping, assemble steering group, analysis of requirements, designing, develop of a prototype and system evaluation. The PDA is a self-triage system that will help early identification of risk symptoms in patients, and help manage them. System recommendations for risk signs are: Refer to the nearest hospital or healthcare center without delay, refer to the doctor and tell your doctor in the next visit. To identify patient care needs, a semi-structured interview with members of steering group, including patients and clinical experts, was conducted by the researchers. A prototype of the decision aid was made according to identified needs in the previous step. Finally, in order to evaluate its usability rate by using the System Usability Scale (SUS) questionnaire, it was used by exerts and patients. This study identified information needs, risk signs and steps that patients need to make appropriate decisions about them. The main capabilities of the decision aid are features such as reminders for appointment/test, time of taking medication, registration of symptoms, weight, blood pressure, body temperature, advising to patient in case of signs of risk, weight, blood pressure, body temperature and test results which were reported in the diagram. The mean score of system's usability evaluated by medical informatics specialists, clinicians, and patients were 88.33, 95, and 91. PDAs was usable and desirable from the point of view of medical informatics specialists, clinicians and patients.

  15. Prediction and evaluation method of wind environment in the early design stage using BIM-based CFD simulation

    International Nuclear Information System (INIS)

    Lee, Sumi; Song, Doosam

    2010-01-01

    Drastic urbanization and manhattanization are causing various problems in wind environment. This study suggests a CFD simulation method to evaluate wind environment in the early design stage of high-rise buildings. The CFD simulation of this study is not a traditional in-depth simulation, but a method to immediately evaluate wind environment for each design alternative and provide guidelines for design modification. Thus, the CFD simulation of this study to evaluate wind environments uses BIM-based CFD tools to utilize building models in the design stage. This study examined previous criteria to evaluate wind environment for pedestrians around buildings and selected evaluation criteria applicable to the CFD simulation method of this study. Furthermore, proper mesh generation method and CPU time were reviewed to find a meaningful CFD simulation result for determining optimal design alternative from the perspective of wind environment in the design stage. In addition, this study is to suggest a wind environment evaluation method through a BIM-based CFD simulation.

  16. An Interactive Web-Based Program for Stepfamilies: Development and Evaluation of Efficacy

    Science.gov (United States)

    Gelatt, Vicky A.; Adler-Baeder, Francesca; Seeley, John R.

    2010-01-01

    This study evaluated the efficacy of a family life education program for stepfamilies that is self-administered, interactive, and web-based. The program uses behavior-modeling videos to demonstrate effective couple, parenting, and stepparenting practices. A diverse sample of 300 parents/stepparents of a child aged 11-15 years were randomized into…

  17. 75 FR 24990 - Proposed Information Collection for the Evaluation of the Community-Based Job Training Grants...

    Science.gov (United States)

    2010-05-06

    ... Evaluation of the Community-Based Job Training Grants; Comment Request AGENCY: Employment and Training...- Based Job Training Grants. A copy of the proposed information collection request can be obtained by...-Based Job Training Grants (CBJTG) program is sponsored by ETA as an investment in building the capacity...

  18. Evaluation of Range-based Methods for Localization in Grain Storages

    DEFF Research Database (Denmark)

    Juul, Jakob Pilegaard; Green, Ole; Jacobsen, Rune Hylsberg

    2016-01-01

    sensor nodes embedded in a grain storage. A path loss model that takes into account the temperature and moisture content of the grain at each sensor node was used for estimating distance based on received signal strength. The average error of the position estimates was 6.3 m. Tests using near......-field electromagnetic ranging were performed to evaluate the performance of the method. It was found that the experimental setup worked best between 2 - 7 m where the average error was 4.9% of the actual distance....

  19. Evaluation of Surface Characteristics of Denture Base Using Organic-Inorganic Hybrid Coating: An SEM Study.

    Science.gov (United States)

    Aa, Jafari; Mh, Lotfi-Kamran; M, Ghafoorzadeh; Sm, Shaddel

    2017-06-01

    Despite the numerous positive features of acrylic denture base, there are a number of undeniable associated disadvantages. The properties of denture base have been improved through various interventions including application of different types of filler and coatings. This study aimed to evaluate the surface roughness, thickness and coating quality of organic-inorganic coating on the denture base through scanning electron microscopy. Moreover, the colour change was evaluated visually. The organic-inorganic hybrid coatings were prepared. Acrylic discs of 10×10 mm were fabricated. The test discs were dipped in the hybrid coating and cured. In order to evaluate the surface roughness and coating thickness, the surface and cross-section of the samples in both coated and control groups were subjected to scanning electron microscopy. The colour change and transparency were visually evaluated with naked eyes. The data were statistically analyzed by student's t test. The hybrid materials perfectly covered all the surfaces of acrylic resin and established proper thickness. The coated group seemed smoother and flatter than the control group; however, the difference was not statistically significant ( for all parameters p > 0.05). It was quite a thin coating and no perceptible colour change was observed. The hybrid coating maintained good binding, caused no noticeable discoloration, and thoroughly covered the acrylic resin surface with uniform delicate thickness. It also slightly improved the acrylic resin surface roughness.

  20. Model‐based economic evaluations in smoking cessation and their transferability to new contexts: a systematic review

    Science.gov (United States)

    Berg, Marrit L.; Cheung, Kei Long; Hiligsmann, Mickaël; Evers, Silvia; de Kinderen, Reina J. A.; Kulchaitanaroaj, Puttarin

    2017-01-01

    Abstract Aims To identify different types of models used in economic evaluations of smoking cessation, analyse the quality of the included models examining their attributes and ascertain their transferability to a new context. Methods A systematic review of the literature on the economic evaluation of smoking cessation interventions published between 1996 and April 2015, identified via Medline, EMBASE, National Health Service (NHS) Economic Evaluation Database (NHS EED), Health Technology Assessment (HTA). The checklist‐based quality of the included studies and transferability scores was based on the European Network of Health Economic Evaluation Databases (EURONHEED) criteria. Studies that were not in smoking cessation, not original research, not a model‐based economic evaluation, that did not consider adult population and not from a high‐income country were excluded. Findings Among the 64 economic evaluations included in the review, the state‐transition Markov model was the most frequently used method (n = 30/64), with quality adjusted life years (QALY) being the most frequently used outcome measure in a life‐time horizon. A small number of the included studies (13 of 64) were eligible for EURONHEED transferability checklist. The overall transferability scores ranged from 0.50 to 0.97, with an average score of 0.75. The average score per section was 0.69 (range = 0.35–0.92). The relative transferability of the studies could not be established due to a limitation present in the EURONHEED method. Conclusion All existing economic evaluations in smoking cessation lack in one or more key study attributes necessary to be fully transferable to a new context. PMID:28060453

  1. Model-based economic evaluations in smoking cessation and their transferability to new contexts: a systematic review.

    Science.gov (United States)

    Berg, Marrit L; Cheung, Kei Long; Hiligsmann, Mickaël; Evers, Silvia; de Kinderen, Reina J A; Kulchaitanaroaj, Puttarin; Pokhrel, Subhash

    2017-06-01

    To identify different types of models used in economic evaluations of smoking cessation, analyse the quality of the included models examining their attributes and ascertain their transferability to a new context. A systematic review of the literature on the economic evaluation of smoking cessation interventions published between 1996 and April 2015, identified via Medline, EMBASE, National Health Service (NHS) Economic Evaluation Database (NHS EED), Health Technology Assessment (HTA). The checklist-based quality of the included studies and transferability scores was based on the European Network of Health Economic Evaluation Databases (EURONHEED) criteria. Studies that were not in smoking cessation, not original research, not a model-based economic evaluation, that did not consider adult population and not from a high-income country were excluded. Among the 64 economic evaluations included in the review, the state-transition Markov model was the most frequently used method (n = 30/64), with quality adjusted life years (QALY) being the most frequently used outcome measure in a life-time horizon. A small number of the included studies (13 of 64) were eligible for EURONHEED transferability checklist. The overall transferability scores ranged from 0.50 to 0.97, with an average score of 0.75. The average score per section was 0.69 (range = 0.35-0.92). The relative transferability of the studies could not be established due to a limitation present in the EURONHEED method. All existing economic evaluations in smoking cessation lack in one or more key study attributes necessary to be fully transferable to a new context. © 2017 The Authors. Addiction published by John Wiley & Sons Ltd on behalf of Society for the Study of Addiction.

  2. STEREOTYPES IN CONSUMERS’ PRODUCT EVALUATION BASED ON THE COUNTRY-OF-ORIGIN

    Directory of Open Access Journals (Sweden)

    Roxana-Denisa G. STOENESCU

    2014-11-01

    Full Text Available This paper focuses on the concept of country-of-origin and its effects on consumers’ product evaluation process. Given the increasingly competition in the context of a global market, nowadays it has become a difficult task to create and maintain a sustainable competitive advantage. Consumers rely on many elements in evaluating a certain product, but country-of-origin remains a powerful variable in terms of product image and perception. The purpose of this study is to examine both the advantages and risks involved in consumers’ evaluation process, linking the concept of country-of-origin with certain stereotypes created around it. The study is based on exploratory research, through the investigation of secondary data as a collection method. As results, research showed that a positive country image can compensate in terms of perception for a weak brand, suggesting that a predetermined opinion can substitute a quality searched for in buying a product. The article concludes with a discussion of directions and limits, as an impulsion for future investigation.

  3. Assessing the Promise of Standards-Based Performance Evaluation for Principals: Results from a Randomized Trial

    Science.gov (United States)

    Kimball, Steven Miller; Milanowski, Anthony; McKinney, Sarah A.

    2009-01-01

    Principals (N = 76) in a large western U.S. school district were randomly assigned to be evaluated using either a new standards-based system or to continue with the old system. It was hypothesized that principals evaluated with the new system would report clearer performance expectations, better feedback, greater fairness and system satisfaction,…

  4. Evaluating the hydrological consistency of evaporation products using satellite-based gravity and rainfall data

    Science.gov (United States)

    López, Oliver; Houborg, Rasmus; McCabe, Matthew Francis

    2017-01-01

    Advances in space-based observations have provided the capacity to develop regional- to global-scale estimates of evaporation, offering insights into this key component of the hydrological cycle. However, the evaluation of large-scale evaporation retrievals is not a straightforward task. While a number of studies have intercompared a range of these evaporation products by examining the variance amongst them, or by comparison of pixel-scale retrievals against ground-based observations, there is a need to explore more appropriate techniques to comprehensively evaluate remote-sensing-based estimates. One possible approach is to establish the level of product agreement between related hydrological components: for instance, how well do evaporation patterns and response match with precipitation or water storage changes? To assess the suitability of this consistency-based approach for evaluating evaporation products, we focused our investigation on four globally distributed basins in arid and semi-arid environments, comprising the Colorado River basin, Niger River basin, Aral Sea basin, and Lake Eyre basin. In an effort to assess retrieval quality, three satellite-based global evaporation products based on different methodologies and input data, including CSIRO-PML, the MODIS Global Evapotranspiration product (MOD16), and Global Land Evaporation: the Amsterdam Methodology (GLEAM), were evaluated against rainfall data from the Global Precipitation Climatology Project (GPCP) along with Gravity Recovery and Climate Experiment (GRACE) water storage anomalies. To ensure a fair comparison, we evaluated consistency using a degree correlation approach after transforming both evaporation and precipitation data into spherical harmonics. Overall we found no persistent hydrological consistency in these dryland environments. Indeed, the degree correlation showed oscillating values between periods of low and high water storage changes, with a phase difference of about 2-3 months

  5. Evaluation of a preschool nutrition education program based on the theory of multiple intelligences.

    Science.gov (United States)

    Cason, K L

    2001-01-01

    This report describes the evaluation of a preschool nutrition education program based on the theory of multiple intelligences. Forty-six nutrition educators provided a series of 12 lessons to 6102 preschool-age children. The program was evaluated using a pretest/post-test design to assess differences in fruit and vegetable identification, healthy snack choices, willingness to taste foods, and eating behaviors. Subjects showed significant improvement in food identification and recognition, healthy snack identification, willingness to taste foods, and frequency of fruit, vegetable, meat, and dairy consumption. The evaluation indicates that the program was an effective approach for educating preschool children about nutrition.

  6. Evaluation of an Electronic Smart-Card Based School Absenteeism Surveillance System

    OpenAIRE

    So, HC; Lam, CK; Tam, YH; Cowling, BJ; Leung, GM; Lau, EHY; Ip, DKM

    2014-01-01

    We evaluated the performance of an electronic smart-card based school absenteeism surveillance system which was initiated in 2008 in Hong Kong. The result demonstrated the feasibility and potential benefit of employing electronic school absenteeism data as captured automatically by a smart card system as an alternative data stream for monitoring influenza activities, and flexibility in establishing surveillance for emerging diseases. The increasing popularity of usage of smart card technology...

  7. Performance Evaluation of a Biometric System Based on Acoustic Images

    Science.gov (United States)

    Izquierdo-Fuente, Alberto; del Val, Lara; Jiménez, María I.; Villacorta, Juan J.

    2011-01-01

    An acoustic electronic scanning array for acquiring images from a person using a biometric application is developed. Based on pulse-echo techniques, multifrequency acoustic images are obtained for a set of positions of a person (front, front with arms outstretched, back and side). Two Uniform Linear Arrays (ULA) with 15 λ/2-equispaced sensors have been employed, using different spatial apertures in order to reduce sidelobe levels. Working frequencies have been designed on the basis of the main lobe width, the grating lobe levels and the frequency responses of people and sensors. For a case-study with 10 people, the acoustic profiles, formed by all images acquired, are evaluated and compared in a mean square error sense. Finally, system performance, using False Match Rate (FMR)/False Non-Match Rate (FNMR) parameters and the Receiver Operating Characteristic (ROC) curve, is evaluated. On the basis of the obtained results, this system could be used for biometric applications. PMID:22163708

  8. Performance Evaluation of a Biometric System Based on Acoustic Images

    Directory of Open Access Journals (Sweden)

    Juan J. Villacorta

    2011-10-01

    Full Text Available An acoustic electronic scanning array for acquiring images from a person using a biometric application is developed. Based on pulse-echo techniques, multifrequency acoustic images are obtained for a set of positions of a person (front, front with arms outstretched, back and side. Two Uniform Linear Arrays (ULA with 15 l/2-equispaced sensors have been employed, using different spatial apertures in order to reduce sidelobe levels. Working frequencies have been designed on the basis of the main lobe width, the grating lobe levels and the frequency responses of people and sensors. For a case-study with 10 people, the acoustic profiles, formed by all images acquired, are evaluated and compared in a mean square error sense. Finally, system performance, using False Match Rate (FMR/False Non-Match Rate (FNMR parameters and the Receiver Operating Characteristic (ROC curve, is evaluated. On the basis of the obtained results, this system could be used for biometric applications.

  9. Ni-Cr based dental alloys; Ni release, corrosion and biological evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Reclaru, L., E-mail: lucien.reclaru@pxgroup.com [PX Holding S.A., Dep R and D Corrosion and Biocompatibility Group, Bd. des Eplatures 42, CH-2304 La Chaux-de-Fonds (Switzerland); Unger, R.E.; Kirkpatrick, C.J. [Institute for Pathology, REPAIR Lab, University Medical Center, Johannes Gutenberg University Mainz, Langenbeckstr.1, D-55101 Mainz (Germany); Susz, C.; Eschler, P.-Y.; Zuercher, M.-H. [PX Holding S.A., Dep R and D Corrosion and Biocompatibility Group, Bd. des Eplatures 42, CH-2304 La Chaux-de-Fonds (Switzerland); Antoniac, I. [Materials Science and Engineering Faculty, Politehnica of Bucharest, 060042 Bucharest (Romania); Luethy, H. [Institute of Dental Materials Science and Technology, University of Basel, Hebelstrasse 3, CH-4056 Basel (Switzerland)

    2012-08-01

    In the last years the dental alloy market has undergone dramatic changes for reasons of economy and biocompatibility. Nickel based alloys have become widely used substitute for the much more expensive precious metal alloys. In Europe the prevalence of nickel allergy is 10-15% for female adults and 1-3% for male adults. Despite the restrictions imposed by the EU for the protection of the general population in contact dermatitis, the use of Ni-Cr dental alloys is on the increase. Some questions have to be faced regarding the safety risk of nickel contained in dental alloys. We have collected based on many EU markets, 8 Ni-Cr dental alloys. Microstructure characterization, corrosion resistance (generalized, crevice and pitting) in saliva and the quantities of cations released in particular nickel and CrVI have been evaluated. We have applied non parametric classification tests (Kendall rank correlation) for all chemical results. Also cytotoxicity tests and an evaluation specific to TNF-alpha have been conducted. According to the obtained results, it was found that their behavior to corrosion was weak but that nickel release was high. The quantities of nickel released are higher than the limits imposed in the EU concerning contact with the skin or piercing. Surprisingly the biological tests did not show any cytotoxic effect on Hela and L929 cells or any change in TNF-alpha expression in monocytic cells. The alloys did not show any proinflammatory response in endothelial cells as demonstrated by the absence of ICAM-1 induction. We note therefore that there is really no direct relationship between the in vitro biological evaluation tests and the physico-chemical characterization of these dental alloys. Clinical and epidemiological studies are required to clarify these aspects. - Highlights: Black-Right-Pointing-Pointer Nickel released was higher than the limits imposed in EU in contact with the skin. Black-Right-Pointing-Pointer No direct relationship between the

  10. Evaluation of tomographic-image based geometries with PENELOPE Monte Carlo

    International Nuclear Information System (INIS)

    Kakoi, A.A.Y.; Galina, A.C.; Nicolucci, P.

    2009-01-01

    The Monte Carlo method can be used to evaluate treatment planning systems or for the determination of dose distributions in radiotherapy planning due to its accuracy and precision. In Monte Carlo simulation packages typically used in radiotherapy, however, a realistic representation of the geometry of the patient can not be used, which compromises the accuracy of the results. In this work, an algorithm for the description of geometries based on CT images of patients, developed to be used with Monte Carlo simulation package PENELOPE, is tested by simulating the dose distribution produced by a photon beam of 10 MV. The geometry simulated was based on CT images of a planning of prostate cancer. The volumes of interest in the treatment were adequately represented in the simulation geometry, allowing the algorithm to be used in verification of doses in radiotherapy treatments. (author)

  11. Evaluating design-based formative assessment practices in outdoor science teaching

    DEFF Research Database (Denmark)

    Hartmeyer, Rikke; Stevenson, Matthew Peter; Bentsen, Peter

    2016-01-01

    Background and purpose: Research in formative assessment often pays close attention to the strategies which can be used by teachers. However, less emphasis in the literature seems to have been paid to study the application of formative assessment designs in practice. In this paper, we argue...... that a formative assessment design that we call Eva-Mapping, which is developed on the principles of design-based research, can be a productive starting point for disseminating and further developing formative assessment practices in outdoor science teaching. Sample, design and methods: We conducted an evaluation...... of the design, based on video-elicited focus group interviews with two groups of experienced science teachers. Both groups consisted of teachers who taught science outside the classroom on a regular basis. These groups watched identical video sequences which were recorded during lessons in which teachers...

  12. Teaching evidence-based medical care: description and evaluation.

    Science.gov (United States)

    Grad, R; Macaulay, A C; Warner, M

    2001-09-01

    This paper describes and evaluates several years of a seminar series designed to stimulate residents to seek evidence-based answers to their clinical questions and incorporate this evidence into practice. At the first session, 86 of 89 (97%) residents completed a baseline needs assessment questionnaire. Post-course self-assessment questionnaires measured change from the first to the final seminar session in six domains of interest and skill, as well as residents' preferred sources of information for clinical problem solving up to 2 years after the course. Before the seminars, 48% of residents reported that textbooks were their most important source of information for solving clinical problems. A total of 58 of 75 (77%) residents completed the first post-course questionnaire. Residents reported significant increases in skill at formulating clinical questions and searching for evidence-based answers, appraising reviews, and deciding when and how to incorporate new findings into practice. Use of secondary sources of information such as "Best Evidence," moved up in importance from before the course to after the course. First-year family practice residents who completed our seminar series have reported increased skill at blending consideration of a clinical problem with the use of secondary sources of information to access evidence to support their health care decisions.

  13. Development of internet-based cooperative system for integrity evaluation of reactor pressure vessel

    International Nuclear Information System (INIS)

    Kim, Jong Choon; Choi, Jae Boong; Kim, Young Jin; Choi, Young Hwan

    2004-01-01

    Since early 1950s fracture mechanics has brought significant impact on structural integrity assessment in a wide range of industries such as power, transportation, civil and petrochemical industries, especially in nuclear power plant industries. For the last two decades, significant efforts have been devoted in developing defect assessment procedures, from which various fitness-for-purpose or fitness-for-service codes have been developed. From another aspect, recent advances in IT (Information Technologies) bring rapid changes in various engineering fields. IT enables people to share information through network and thus provides concurrent working environment without limitations of working places. For this reason, a network system based on internet or intranet bas been appeared in various fields of business. Evaluating the integrity of structures is one of the most critical issues in nuclear industry. In order to evaluate the integrity of structures, a complicated and collaborative procedure is required including regular in-service inspection, fracture mechanics analysis, etc. And thus, experts in different fields have to cooperate to resolve the integrity problem. In this paper, an internet-based cooperative system for integrity evaluation system which adapts IT into a structural integrity evaluation procedure for reactor pressure vessel is introduced. The proposed system uses Virtual Reality (VR) technique, Virtual Network Computing (VNC) and agent programs. This system is able to support 3-dimensional virtual reality environment and to provide experts to cooperate by accessing related data through internet

  14. Readability evaluation of Internet-based patient education materials related to the anesthesiology field.

    Science.gov (United States)

    De Oliveira, Gildasio S; Jung, Michael; Mccaffery, Kirsten J; McCarthy, Robert J; Wolf, Michael S

    2015-08-01

    The main objective of the current investigation was to assess the readability of Internet-based patient education materials related to the field of anesthesiology. We hypothesized that the majority of patient education materials would not be written according to current recommended readability grade level. Online patient education materials describing procedures, risks, and management of anesthesia-related topics were identified using the search engine Google (available at www.google.com) using the terms anesthesia, anesthesiology, anesthesia risks, and anesthesia care. Cross-sectional evaluation. None. Assessments of content readability were performed using validated instruments (Flesch-Kincaid Grade Formulae, the Gunning Frequency of Gobbledygook, the New Dale-Chall Test, the Fry graph, and the Flesch Reading Ease score). Ninety-six Web sites containing Internet patient education materials (IPEMs) were evaluated. The median (interquartile range) readability grade level for all evaluated IPEMs was 13.5 (12.0-14.6). All the evaluated documents were classified at a greater readability level than the current recommended readability grade, P Internet-based patient education materials related to the field of anesthesiology are currently written far above the recommended readability grade level. High complexity of written education materials likely limits access of information to millions of American patients. Redesign of online content of Web sites that provide patient education material regarding anesthesia could be an important step in improving access to information for patients with poor health literacy. Copyright © 2015 Elsevier Inc. All rights reserved.

  15. Evaluation of chronic lymphocytic leukemia by BAC-based microarray analysis

    Directory of Open Access Journals (Sweden)

    McDaniel Lisa D

    2011-02-01

    Full Text Available Abstract Background Chronic lymphocytic leukemia (CLL is a highly variable disease with life expectancies ranging from months to decades. Cytogenetic findings play an integral role in defining the prognostic significance and treatment for individual patients. Results We have evaluated 25 clinical cases from a tertiary cancer center that have an established diagnosis of CLL and for which there was prior cytogenetic and/or fluorescence in situ hybridization (FISH data. We performed microarray-based comparative genomic hybridization (aCGH using a bacterial artificial chromosome (BAC-based microarray designed for the detection of known constitutional genetic syndromes. In 15 of the 25 cases, aCGH detected all copy number imbalances identified by prior cytogenetic and/or FISH studies. For the majority of those not detected, the aberrations were present at low levels of mosaicism. Furthermore, for 15 of the 25 cases, additional abnormalities were detected. Four of those cases had deletions that mapped to intervals implicated in inherited predisposition to CLL. For most cases, aCGH was able to detect abnormalities present in as few as 10% of cells. Although changes in ploidy are not easily discernable by aCGH, results for two cases illustrate the detection of additional copy gains and losses present within a mosaic tetraploid cell population. Conclusions Our results illustrate the successful evaluation of CLL using a microarray optimized for the interrogation of inherited disorders and the identification of alterations with possible relevance to CLL susceptibility.

  16. A consideration on internal dose evaluation and intervention based on a surface contamination concept

    International Nuclear Information System (INIS)

    Yasuda, H.

    1997-01-01

    Long-term radiation doses received by the inhabitants after the Chernobyl accident have been evaluated according to the surface contamination levels on the ground surface. The health effects have also been discussed by comparison between the surface-contaminated area and the uncontaminated control area. Selected protective measures were carried out in accordance with the contamination level of surface soil. These have been based on the 'surface contamination concept' which assumes that the radiation risk to inhabitants is proportional to the level of ground-surface contamination. The observations collected in regions around Chernobyl, however, show that the internal radiation doses to the inhabitants poorly correlate with the surface contamination level. This fact poses a question on the suitability of dose evaluations and interventions based on this concept

  17. Risk Analysis Based on AHP and Fuzzy Comprehensive Evaluation for Maglev Train Bogie

    Directory of Open Access Journals (Sweden)

    Chengxin Fan

    2016-01-01

    Full Text Available The maglev bogie is the key subsystem for maglev train security. To ensure life and property security, it is essential to evaluate its risk level before its operation. In this paper, a combinational method of analytic hierarchy process and fuzzy comprehensive evaluation is proposed to assess hazards in a complex maglev bogie system associated with multiple subsystems’ failures. The very comprehensive identification of risk sources has been done by analyzing the structure of maglev bogie. Furthermore, based on the fuzzy theory, linguistic evaluation set is classified according to risk tolerance. The score of each risk factor is obtained by weighted sum of the result of fuzzy comprehensive evaluation. Our results show that the degree of maglev bogie’s risk is within the range of acceptability. The merits of this work facilitate finding the weak links and determining the maintenance of maglev bogie system.

  18. Evaluation of Freshwater Aquatic Resources and Stormwater Management at U.S. Naval Submarine Base, Bangor, Washington

    National Research Council Canada - National Science Library

    May, Christopher

    1997-01-01

    Surface and storm water conditions on the Naval Submarine Base (NSB), Bangor, Washington, are evaluated, and recommendations are made to improve water quality and enhance the ecological integrity of aquatic resources located on the base...

  19. Evaluation of a commercial biologically based IMRT treatment planning system

    International Nuclear Information System (INIS)

    Semenenko, Vladimir A.; Reitz, Bodo; Day, Ellen; Qi, X. Sharon; Miften, Moyed; Li, X. Allen

    2008-01-01

    A new inverse treatment planning system (TPS) for external beam radiation therapy with high energy photons is commercially available that utilizes both dose-volume-based cost functions and a selection of cost functions which are based on biological models. The purpose of this work is to evaluate quality of intensity-modulated radiation therapy (IMRT) plans resulting from the use of biological cost functions in comparison to plans designed using a traditional TPS employing dose-volume-based optimization. Treatment planning was performed independently at two institutions. For six cancer patients, including head and neck (one case from each institution), prostate, brain, liver, and rectal cases, segmental multileaf collimator IMRT plans were designed using biological cost functions and compared with clinically used dose-based plans for the same patients. Dose-volume histograms and dosimetric indices, such as minimum, maximum, and mean dose, were extracted and compared between the two types of treatment plans. Comparisons of the generalized equivalent uniform dose (EUD), a previously proposed plan quality index (fEUD), target conformity and heterogeneity indices, and the number of segments and monitor units were also performed. The most prominent feature of the biologically based plans was better sparing of organs at risk (OARs). When all plans from both institutions were combined, the biologically based plans resulted in smaller EUD values for 26 out of 33 OARs by an average of 5.6 Gy (range 0.24 to 15 Gy). Owing to more efficient beam segmentation and leaf sequencing tools implemented in the biologically based TPS compared to the dose-based TPS, an estimated treatment delivery time was shorter in most (five out of six) cases with some plans showing up to 50% reduction. The biologically based plans were generally characterized by a smaller conformity index, but greater heterogeneity index compared to the dose-based plans. Overall, compared to plans based on dose

  20. The Evaluation of Land Ecological Safety of Chengchao Iron Mine Based on PSR and MEM

    Science.gov (United States)

    Jin, Xiangdong; Chen, Yong

    2018-01-01

    Land ecological security is of vital importance to local security and sustainable development of mining activities. The study has analyzed the potential causal chains between the land ecological security of Iron Mine mining environment, mine resource and the social-economic background. On the base of Pressure-State-Response model, the paper set up a matter element evaluation model of land ecological security, and applies it in Chengchao iron mine. The evaluation result proves to be effective in land ecological evaluation.

  1. Muscle fatigue evaluation of astronaut upper limb based on sEMG and subjective assessment

    Science.gov (United States)

    Zu, Xiaoqi; Zhou, Qianxiang; Li, Yun

    2012-07-01

    All movements are driven by muscle contraction, and it is easy to cause muscle fatigue. Evaluation of muscle fatigue is a hot topic in the area of astronaut life support training and rehabilitation. If muscle gets into fatigue condition, it may reduce work efficiency and has an impact on psychological performance. Therefore it is necessary to develop an accurate and usable method on muscle fatigue evaluation of astronaut upper limb. In this study, we developed a method based on surface electromyography (sEMG) and subjective assessment (Borg scale) to evaluate local muscle fatigue. Fifteen healthy young male subjects participated in the experiment. They performed isometric muscle contractions of the upper limb. sEMG of the biceps brachii were recorded during the entire process of isotonic muscle contraction and Borg scales of muscle fatigue were collected in certain times. sEMG were divided into several parts, and then mean energy of each parts were calculated by the one-twelfth band octave method. Equations were derived based on the relationship between the mean energy of sEMG and Borg scale. The results showed that cubic curve could describe the degree of local muscle fatigue, and could be used to evaluate and monitor local muscle fatigue during the entire process.

  2. Determinants of the use of value-based performance measures for managerial performance evaluation

    NARCIS (Netherlands)

    Dekker, H.C.; Groot, T.L.C.M.; Schoute, M.; Wiersma, E.

    2012-01-01

    As value-based (VB) performance measures include firms' cost of capital, they are considered more congruent than earnings measures. Prior studies, however, find that their use for managerial performance evaluation is less extensive than their presumed benefits would suggest. We examine how the

  3. An Energy Efficiency Evaluation Method Based on Energy Baseline for Chemical Industry

    Directory of Open Access Journals (Sweden)

    Dong-mei Yao

    2016-01-01

    Full Text Available According to the requirements and structure of ISO 50001 energy management system, this study proposes an energy efficiency evaluation method based on energy baseline for chemical industry. Using this method, the energy plan implementation effect in the processes of chemical production can be evaluated quantitatively, and evidences for system fault diagnosis can be provided. This method establishes the energy baseline models which can meet the demand of the different kinds of production processes and gives the general solving method of each kind of model according to the production data. Then the energy plan implementation effect can be evaluated and also whether the system is running normally can be determined through the baseline model. Finally, this method is used on cracked gas compressor unit of ethylene plant in some petrochemical enterprise; it can be proven that this method is correct and practical.

  4. Evaluation of analytical performance based on partial order methodology.

    Science.gov (United States)

    Carlsen, Lars; Bruggemann, Rainer; Kenessova, Olga; Erzhigitov, Erkin

    2015-01-01

    Classical measurements of performances are typically based on linear scales. However, in analytical chemistry a simple scale may be not sufficient to analyze the analytical performance appropriately. Here partial order methodology can be helpful. Within the context described here, partial order analysis can be seen as an ordinal analysis of data matrices, especially to simplify the relative comparisons of objects due to their data profile (the ordered set of values an object have). Hence, partial order methodology offers a unique possibility to evaluate analytical performance. In the present data as, e.g., provided by the laboratories through interlaboratory comparisons or proficiency testings is used as an illustrative example. However, the presented scheme is likewise applicable for comparison of analytical methods or simply as a tool for optimization of an analytical method. The methodology can be applied without presumptions or pretreatment of the analytical data provided in order to evaluate the analytical performance taking into account all indicators simultaneously and thus elucidating a "distance" from the true value. In the present illustrative example it is assumed that the laboratories analyze a given sample several times and subsequently report the mean value, the standard deviation and the skewness, which simultaneously are used for the evaluation of the analytical performance. The analyses lead to information concerning (1) a partial ordering of the laboratories, subsequently, (2) a "distance" to the Reference laboratory and (3) a classification due to the concept of "peculiar points". Copyright © 2014 Elsevier B.V. All rights reserved.

  5. A life evaluation under creep-fatigue-environment interaction of Ni-base wrought alloys

    International Nuclear Information System (INIS)

    Hattori, Hiroshi; Kitagawa, Masaki; Ohtomo, Akira; Itoh, Mitsuyoshi

    1986-01-01

    In order to determine a failure criteria under cyclic loading and affective environment for HTGR systems, a series of strain controlled low-cycle fatigue tests were carried out at HTGR maximum gas temperatures in air, in vacuum and in HTGR helium environments on two nickel-base wrought alloys, namely Inconel 617 and Hastelloy XR. This paper first describes the creep-fatigue-environment properties of these alloys followed by a proposal of an evaluation method of creep-fatigue-environment interaction based on the experimental data to define the more reasonable design criteria, which is a modification of the linear damage summation rule. Second, the creep-fatigue properties of Hastelloy XR at 900 deg C and the result evaluated by this proposed method are shown. This criterion is successfully applied to the life prediction at 900 deg C. In addition, the creep-fatigue properties of Hastelloy XR-II are discussed. (author)

  6. IDENTIFICATION OF BASES FOR EVALUATION OF THE BUSINESS EXCELLENCE STATUS IN RELATION TO THE CSR CONCEPT

    Directory of Open Access Journals (Sweden)

    Miriam Jankalová

    2017-06-01

    Full Text Available The process of globalization has started the need to achieve the Business Excellence status. Emphasizing the responsibility of the company's behaviour towards society and the environment is confirmed by the adoption of the concept of corporate social responsibility (CSR. Based on theoretical background review, there is no single unified methodology for the evaluation of the Business Excellence status in relation to the CSR concept. The aim of this paper is to identify bases for the evaluation of Business Excellence status in relation to the CSR concept. The most important tasks include: to identify internal and external factors affecting Business Excellence status; to identify CSR areas for the needs of evaluation of the Business Excellence status. Primary sources included especially national and foreign scientific publications.

  7. Fault diagnosis and performance evaluation for high current LIA based on radial basis function neural network

    International Nuclear Information System (INIS)

    Yang Xinglin; Wang Huacen; Chen Nan; Dai Wenhua; Li Jin

    2006-01-01

    High current linear induction accelerator (LIA) is a complicated experimental physics device. It is difficult to evaluate and predict its performance. this paper presents a method which combines wavelet packet transform and radial basis function (RBF) neural network to build fault diagnosis and performance evaluation in order to improve reliability of high current LIA. The signal characteristics vectors which are extracted based on energy parameters of wavelet packet transform can well present the temporal and steady features of pulsed power signal, and reduce data dimensions effectively. The fault diagnosis system for accelerating cell and the trend classification system for the beam current based on RBF networks can perform fault diagnosis and evaluation, and provide predictive information for precise maintenance of high current LIA. (authors)

  8. Task-based evaluation of segmentation algorithms for diffusion-weighted MRI without using a gold standard

    International Nuclear Information System (INIS)

    Jha, Abhinav K; Kupinski, Matthew A; Rodríguez, Jeffrey J; Stephen, Renu M; Stopeck, Alison T

    2012-01-01

    In many studies, the estimation of the apparent diffusion coefficient (ADC) of lesions in visceral organs in diffusion-weighted (DW) magnetic resonance images requires an accurate lesion-segmentation algorithm. To evaluate these lesion-segmentation algorithms, region-overlap measures are used currently. However, the end task from the DW images is accurate ADC estimation, and the region-overlap measures do not evaluate the segmentation algorithms on this task. Moreover, these measures rely on the existence of gold-standard segmentation of the lesion, which is typically unavailable. In this paper, we study the problem of task-based evaluation of segmentation algorithms in DW imaging in the absence of a gold standard. We first show that using manual segmentations instead of gold-standard segmentations for this task-based evaluation is unreliable. We then propose a method to compare the segmentation algorithms that does not require gold-standard or manual segmentation results. The no-gold-standard method estimates the bias and the variance of the error between the true ADC values and the ADC values estimated using the automated segmentation algorithm. The method can be used to rank the segmentation algorithms on the basis of both the ensemble mean square error and precision. We also propose consistency checks for this evaluation technique. (paper)

  9. Economic evaluation of algae biodiesel based on meta-analyses

    Science.gov (United States)

    Zhang, Yongli; Liu, Xiaowei; White, Mark A.; Colosi, Lisa M.

    2017-08-01

    The objective of this study is to elucidate the economic viability of algae-to-energy systems at a large scale, by developing a meta-analysis of five previously published economic evaluations of systems producing algae biodiesel. Data from original studies were harmonised into a standardised framework using financial and technical assumptions. Results suggest that the selling price of algae biodiesel under the base case would be 5.00-10.31/gal, higher than the selected benchmarks: 3.77/gal for petroleum diesel, and 4.21/gal for commercial biodiesel (B100) from conventional vegetable oil or animal fat. However, the projected selling price of algal biodiesel (2.76-4.92/gal), following anticipated improvements, would be competitive. A scenario-based sensitivity analysis reveals that the price of algae biodiesel is most sensitive to algae biomass productivity, algae oil content, and algae cultivation cost. This indicates that the improvements in the yield, quality, and cost of algae feedstock could be the key factors to make algae-derived biodiesel economically viable.

  10. SVD-Based Evaluation of Multiplexing in Multipinhole SPECT Systems

    Directory of Open Access Journals (Sweden)

    Aaron K. Jorgensen

    2008-01-01

    Full Text Available Multipinhole SPECT system design is largely a trial-and-error process. General principles can give system designers a general idea of how a system with certain characteristics will perform. However, the specific performance of any particular system is unknown before the system is tested. The development of an objective evaluation method that is not based on experimentation would facilitate the optimization of multipinhole systems. We derive a figure of merit for prediction of SPECT system performance based on the entire singular value spectrum of the system. This figure of merit contains significantly more information than the condition number of the system, and is therefore more revealing of system performance. This figure is then compared with simulated results of several SPECT systems and is shown to correlate well to the results of the simulations. The proposed figure of merit is useful for predicting system performance, but additional steps could be taken to improve its accuracy and applicability. The limits of the proposed method are discussed, and possible improvements to it are proposed.

  11. Risk Evaluation on UHV Power Transmission Construction Project Based on AHP and FCE Method

    OpenAIRE

    Huiru Zhao; Sen Guo

    2014-01-01

    Ultra high voltage (UHV) power transmission construction project is a high-tech power grid construction project which faces many risks and uncertainty. Identifying the risk of UHV power transmission construction project can help mitigate the risk loss and promote the smooth construction. The risk evaluation on “Zhejiang-Fuzhou” UHV power transmission construction project was performed based on analytic hierarchy process (AHP) and fuzzy comprehensive evaluation (FCE) method in this paper. Afte...

  12. Evaluation of Achieving a College Education Plus: A Credit-Based Transition Program

    Science.gov (United States)

    Luna, Gaye; Fowler, Michael

    2011-01-01

    This ex post facto study evaluated Achieving a College Education (ACE) Plus program, a credit-based transition program between a high school district and a community college. Achieving a College Education Plus is an early outreach program. It is designed to aid at-risk students in graduating from high school and making a smooth transition to…

  13. Evaluation and selection of open-source EMR software packages based on integrated AHP and TOPSIS.

    Science.gov (United States)

    Zaidan, A A; Zaidan, B B; Al-Haiqi, Ahmed; Kiah, M L M; Hussain, Muzammil; Abdulnabi, Mohamed

    2015-02-01

    Evaluating and selecting software packages that meet the requirements of an organization are difficult aspects of software engineering process. Selecting the wrong open-source EMR software package can be costly and may adversely affect business processes and functioning of the organization. This study aims to evaluate and select open-source EMR software packages based on multi-criteria decision-making. A hands-on study was performed and a set of open-source EMR software packages were implemented locally on separate virtual machines to examine the systems more closely. Several measures as evaluation basis were specified, and the systems were selected based a set of metric outcomes using Integrated Analytic Hierarchy Process (AHP) and TOPSIS. The experimental results showed that GNUmed and OpenEMR software can provide better basis on ranking score records than other open-source EMR software packages. Copyright © 2014 Elsevier Inc. All rights reserved.

  14. AN EVALUATION OF SELECTED MOROCCAN ELT TEXTBOOKS: A STANDARDS-BASED APPROACH PERSPECTIVE

    Directory of Open Access Journals (Sweden)

    Hassan Ait Bouzid

    2017-05-01

    Full Text Available Standards-Based Approach to textbook evaluation has been blooming in recent decades. Nevertheless, this practice has received very little attention in Morocco.  The present study aims to bridge a gap in the literature of the Moroccan context by investigating the extent to which three locally designed ELT textbooks conform to the theoretical principles of the Standards-Based Approach which defines the teaching of English as a foreign language in the country (Ministry of National Education, 2007. Its objective is to examine whether and how these textbooks present contents that enable learners to meet the content standards included in the goal areas of Communications, Cultures, Connections and Comparisons. The study is informed by the theoretical framework of the Standards-Based Approach. It adopts a mixed-methods design that uses content analysis as a mixed data analysis method combining both quantitative and qualitative techniques. The findings reveal a number of shortcomings relevant to the representation of the content standards as several standards are not sufficiently addressed in the activities included in these textbooks. Eventually, some suggestions are addressed to policy makers, textbook designers and teachers to overcome the identified problems in current and future textbooks. The study is expected to sensitize ELT practitioners about the viability of using textbook evaluation in boosting both the quality of ELT textbooks and the quality of the teaching learning outcomes.

  15. Monitoring and evaluation of sport-based HIV/AIDS awareness programmes: Strengthening outcome indicators.

    Science.gov (United States)

    Maleka, Elma Nelisiwe

    2017-12-01

    There are number of Non-Governmental Organisations (NGOs) in South Africa that use sport as a tool to respond to Human Immunodeficiency Virus/Acquired Immunodeficiency Syndrome (HIV/AIDS), however, little is reported about the outcomes and impact of these programmes. The aim of this study is to contribute to a generic monitoring and evaluation framework by improving the options for the use of outcome indicators of sport-based HIV/AIDS awareness programmes of selected NGOs in South Africa. A qualitative method study was carried out with seven employees of five selected NGOs that integrate sport to deliver HIV/AIDS programmes in South Africa. The study further involved six specialists/experts involved in the field of HIV/AIDS and an official from Sport Recreation South Africa (SRSA). Multiple data collection instruments including desktop review, narrative systematic review, document analysis, one-on-one interviews and focus group interview were used to collect information on outcomes and indicators for sport-based HIV/AIDS awareness programmes. The information was classified according to the determinants of HIV/AIDS. The overall findings revealed that the sport-based HIV/AIDS awareness programmes of five selected NGOs examined in this study focus on similar HIV prevention messages within the key priorities highlighted in the current National Strategic Plan for HIV/AIDS, STIs and TB of South Africa. However, monitoring and evaluating outcomes of sport-based HIV/AIDS programmes of the selected NGOs remains a challenge. A need exists for the improvement of the outcome statements and indicators for their sport-based HIV/AIDS awareness programmes. This study proposed a total of 51 generic outcome indicators focusing on measuring change in the knowledge of HIV/AIDS and change in attitude and intention towards HIV risk behaviours. In addition, this study further proposed a total of eight generic outcome indicators to measure predictors of HIV risk behaviour. The selected

  16. Sensory quality evaluation of whey-based beverages

    Directory of Open Access Journals (Sweden)

    Veronika Legarová

    2010-12-01

    Full Text Available Whey as a by-product of the cheese industry is a source of biological and functional valuable proteins. The aim of this research was to evaluate the commercial potential of whey-based dairy beverages containing a definite amount of semi-skimmed milk addition. The purpose of this paper was to improve the whey flavour via its fermentation by commercial yogurt starter cultures, and via 25 % and 50 % of milk addition. The course of fermentation was monitored by pH and titratable acidity changes. The sensory profile of non-fermented and fermented drinks was assessed using unstructured graphical scales. No significant differences in acidity were found between the samples which were fermented for 3 or 4 hours, but a significant difference was found between samples of whey drinks without milk and samples with milk addition. Fermentation by yoghurt culture did not bring statistically significant improvement of the whey drink organoleptic properties, while the addition of milk was the most important factor influencing not only the total sensory quality of the whey drinks but also their flavour, appearance, colour, viscosity and homogeneity.

  17. [Practical chemistry education provided by team-based learning (TBL) and peer evaluation].

    Science.gov (United States)

    Yasuhara, Tomohisa; Konishi, Motomi; Nishida, Takahiro; Kushihata, Taro; Sone, Tomomichi; Kurio, Wasako; Yamamoto, Yumi; Nishikawa, Tomoe; Yanada, Kazuo; Nakamura, Mitsutaka

    2014-01-01

    Learning chemistry is cumulative: basic knowledge and chemical calculation skills are required to gain understanding of higher content. However, we often suffer from students' lack of learning skills to acquire these concepts. One of the reasons is the lack of adequate training in the knowledge and skills of chemistry, and one of the reasons for this lack is the lack of adequate evaluation of training procedures and content. Team-based learning (TBL) is a strong method for providing training in the knowledge and skills of chemistry and reaffirms the knowledge and skills of students of various levels. In our faculty, TBL exercises are provided for first-year students concurrently with lectures in physical chemistry and analytical chemistry. In this study, we researched the adoption of a peer evaluation process for this participatory learning model. Questionnaires taken after TBL exercises in the previous year showed a positive response to TBL. Further, a questionnaire taken after TBL exercises in the spring semester of the current year also yielded a positive response not only to TBL but also to peer evaluation. In addition, a significant correlation was observed between the improvement of students' grades in chemistry classes and the feeling the percentage (20%) of peer evaluation in overall evaluation low (logistic regression analysis, p=0.022). On the basis of the findings, we argue that TBL provides a generic, practical learning environment including an effective focus on learning strategy and evaluation of knowledge, skills, and attitudes, and studies on the educational effects of TBL and peer evaluation.

  18. Assessment of ecological passages along road networks within the Mediterranean forest using GIS-based multi criteria evaluation approach.

    Science.gov (United States)

    Gülci, Sercan; Akay, Abdullah Emin

    2015-12-01

    Major roads cause barrier effect and fragmentation on wildlife habitats that are suitable places for feeding, mating, socializing, and hiding. Due to wildlife collisions (Wc), human-wildlife conflicts result in lost lives and loss of biodiversity. Geographical information system (GIS)-based multi criteria evaluation (MCE) methods have been successfully used in short-term planning of road networks considering wild animals. Recently, wildlife passages have been effectively utilized as road engineering structures provide quick and certain solutions for traffic safety and wildlife conservation problems. GIS-based MCE methods provide decision makers with optimum location for ecological passages based on habitat suitability models (HSMs) that classify the areas based on ecological requirements of target species. In this study, ecological passages along Motorway 52 within forested areas in Mediterranean city of Osmaniye in Turkey were evaluated. Firstly, HSM coupled with nine eco-geographic decision variables were developed based on ecological requirements of roe deer (Capreolus capreolus) that were chosen as target species. Then specified decision variables were evaluated using GIS-based weighted linear combination (WLC) method to estimate movement corridors and mitigation points along the motorway. In the solution process, two linkage nodes were evaluated for eco-passages which were determined based on the least-cost movement corridor intersecting with the motorway. One of the passages was identified as a natural wildlife overpass while the other was suggested as underpass construction. The results indicated that computer-based models provide accurate and quick solutions for positioning ecological passages to reduce environmental effects of road networks on wild animals.

  19. Making the Grade: Using Instructional Feedback and Evaluation to Inspire Evidence-Based Teaching

    Science.gov (United States)

    Brickman, Peggy; Gormally, Cara; Martella, Amedee Marchand

    2016-01-01

    Typically, faculty receive feedback about teaching via two mechanisms: end-of-semester student evaluations and peer observation. However, instructors require more sustained encouragement and constructive feedback when implementing evidence-based teaching practices. Our study goal was to characterize the landscape of current instructional-feedback…

  20. Structurally Based Therapeutic Evaluation: A Therapeutic and Practical Approach to Teaching Medicinal Chemistry.

    Science.gov (United States)

    Alsharif, Naser Z.; And Others

    1997-01-01

    Explains structurally based therapeutic evaluation of drugs, which uses seven therapeutic criteria in translating chemical and structural knowledge into therapeutic decision making in pharmaceutical care. In a Creighton University (Nebraska) medicinal chemistry course, students apply the approach to solve patient-related therapeutic problems in…