Secondary Waste Cementitious Waste Form Data Package for the Integrated Disposal Facility Performance Assessment

Energy Technology Data Exchange (ETDEWEB)

Cantrell, Kirk J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Westsik, Joseph H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Serne, R Jeffrey [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Um, Wooyong [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Cozzi, Alex D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2016-05-16

A review of the most up-to-date and relevant data currently available was conducted to develop a set of recommended values for use in the Integrated Disposal Facility (IDF) performance assessment (PA) to model contaminant release from a cementitious waste form for aqueous wastes treated at the Hanford Effluent Treatment Facility (ETF). This data package relies primarily upon recent data collected on Cast Stone formulations fabricated with simulants of low-activity waste (LAW) and liquid secondary wastes expected to be produced at Hanford. These data were supplemented, when necessary, with data developed for saltstone (a similar grout waste form used at the Savannah River Site). Work is currently underway to collect data on cementitious waste forms that are similar to Cast Stone and saltstone but are tailored to the characteristics of ETF-treated liquid secondary wastes. Recommended values for key parameters to conduct PA modeling of contaminant release from ETF-treated liquid waste are provided.

Transuranic contaminated waste form characterization and data base

International Nuclear Information System (INIS)

McArthur, W.C.; Kniazewycz, B.G.

1980-07-01

This report outlines the sources, quantities, characteristics and treatment of transuranic wastes in the United States. This document serves as part of the data base necessary to complete preparation and initiate implementation of transuranic wastes, waste forms, waste container and packaging standards and criteria suitable for inclusion in the present NRC waste management program. No attempt is made to evaluate or analyze the suitability of one technology over another. Indeed, by the nature of this report, there is little critical evaluation or analysis of technologies because such analysis is only appropriate when evaluating a particular application or transuranic waste streams. Due to fiscal restriction, the data base is developed from a myriad of technical sources and does not necessarily contain operating experience and the current status of all technologies. Such an effort was beyond the scope of this report

Transuranic contaminated waste form characterization and data base

Energy Technology Data Exchange (ETDEWEB)

McArthur, W.C.; Kniazewycz, B.G.

1980-07-01

This report outlines the sources, quantities, characteristics and treatment of transuranic wastes in the United States. This document serves as part of the data base necessary to complete preparation and initiate implementation of transuranic wastes, waste forms, waste container and packaging standards and criteria suitable for inclusion in the present NRC waste management program. No attempt is made to evaluate or analyze the suitability of one technology over another. Indeed, by the nature of this report, there is little critical evaluation or analysis of technologies because such analysis is only appropriate when evaluating a particular application or transuranic waste streams. Due to fiscal restriction, the data base is developed from a myriad of technical sources and does not necessarily contain operating experience and the current status of all technologies. Such an effort was beyond the scope of this report.

Reconstruction of normal forms by learning informed observation geometries from data.

Science.gov (United States)

Yair, Or; Talmon, Ronen; Coifman, Ronald R; Kevrekidis, Ioannis G

2017-09-19

The discovery of physical laws consistent with empirical observations is at the heart of (applied) science and engineering. These laws typically take the form of nonlinear differential equations depending on parameters; dynamical systems theory provides, through the appropriate normal forms, an "intrinsic" prototypical characterization of the types of dynamical regimes accessible to a given model. Using an implementation of data-informed geometry learning, we directly reconstruct the relevant "normal forms": a quantitative mapping from empirical observations to prototypical realizations of the underlying dynamics. Interestingly, the state variables and the parameters of these realizations are inferred from the empirical observations; without prior knowledge or understanding, they parametrize the dynamics intrinsically without explicit reference to fundamental physical quantities.

Automated forms processing - An alternative to time-consuming manual double entry of data in arthroplasty registries?

DEFF Research Database (Denmark)

Paulsen, Aksel

2012-01-01

, there was no statistical difference compared to single-key data entry (error proportion=0.007 (95% CI: 0.001-0.024), (p= 0.656)), as well as double-key data entry (error proportion=0.003 (95% CI: 0.000-0.019), (p= 0.319)). Discussion and conclusion: Automated forms processing is a valid alternative to double manual data......Background: The clinical and scientific usage of patient-reported outcome measures is increasing in the health services. Often paper forms are used. Manual double entry of data is defined as the definitive gold standard for transferring data to an electronic format, but the process is laborious....... Automated forms processing may be an alternative, but further validation is warranted. Materials and Methods: 200 patients were randomly selected from a cohort of 5777 patients who had previously answered two different questionnaires. The questionnaires were scanned using an automated forms processing...

Electronic case report forms and electronic data capture within clinical trials and pharmacoepidemiology.

Science.gov (United States)

Rorie, David A; Flynn, Robert W V; Grieve, Kerr; Doney, Alexander; Mackenzie, Isla; MacDonald, Thomas M; Rogers, Amy

2017-09-01

Researchers in clinical and pharmacoepidemiology fields have adopted information technology (IT) and electronic data capture, but these remain underused despite the benefits. This review discusses electronic case report forms and electronic data capture, specifically within pharmacoepidemiology and clinical research. The review used PubMed and the Institute of Electrical and Electronic Engineers library. Search terms used were agreed by the authors and documented. PubMed is medical and health based, whereas Institute of Electrical and Electronic Engineers is technology based. The review focuses on electronic case report forms and electronic data capture, but briefly considers other relevant topics; consent, ethics and security. There were 1126 papers found using the search terms. Manual filtering and reviewing of abstracts further condensed this number to 136 relevant manuscripts. The papers were further categorized: 17 contained study data; 40 observational data; 27 anecdotal data; 47 covering methodology or design of systems; one case study; one literature review; two feasibility studies; and one cost analysis. Electronic case report forms, electronic data capture and IT in general are viewed with enthusiasm and are seen as a cost-effective means of improving research efficiency, educating participants and improving trial recruitment, provided concerns about how data will be protected from misuse can be addressed. Clear operational guidelines and best practises are key for healthcare providers, and researchers adopting IT, and further work is needed on improving integration of new technologies with current systems. A robust method of evaluation for technical innovation is required. © 2017 The Authors. British Journal of Clinical Pharmacology published by John Wiley & Sons Ltd on behalf of British Pharmacological Society.

Transuranic waste form characterization and data base. Executive summary

International Nuclear Information System (INIS)

1980-01-01

The Transuranic Waste Form Characterization and Data Base (Volume 1) provides a wide range of information from which a comprehensive data base can be established and from which standards and criteria can be developed for the present NRC waste management program. Supplementary information on each of the areas discussed in Volume 1 is presented in Appendices A through K (Volumes 2 and 3). The structure of the study (Volume 1) is outlined and appendices of Volumes 2 and 3 correlate with each main section of the report. The Executive Summary reviews the sources, quantities, characteristics and treatment of transuranic wastes in the United States. Due to the variety of potential treatment processes for transuranic wastes, the end products for long-term storage may have corresponding variations in quantities and characteristics

Optimal assignment methods in three-form planned missing data designs for longitudinal panel studies

NARCIS (Netherlands)

Jorgensen, T.D.; Rhemtulla, M.; Schoemann, A.; McPherson, B.; Wu, W.; Little, T.D.

2014-01-01

Planned missing designs are becoming increasingly popular, but because there is no consensus on how to implement them in longitudinal research, we simulated longitudinal data to distinguish between strategies of assigning items to forms and of assigning forms to participants across measurement

How we developed eForms: an electronic form and data capture tool to support assessment in mobile medical education.

Science.gov (United States)

Mooney, Jane S; Cappelli, Tim; Byrne-Davis, Lucie; Lumsden, Colin J

2014-12-01

Mobile learning technologies are being introduced and adopted by an increasing number of medical schools. Following the implementation of these devices, institutions are tasked with the challenge of their integration into curriculum delivery and presented with the opportunity to facilitate data collection from large student cohorts. Since 2011, Manchester Medical School (MMS) has undertaken the largest deployment of iPads within UK Higher Education. Working towards the more efficient collation of students' compulsory workplace-based assessment data led us to evaluate how existing information management software could replace previously paper-based systems. Following an evaluation of six, and a trial of one, commercially available packages, the existing software solutions were found to be inflexible and unfit for purpose. This resulted in the development of a new digital solution that addressed the limitations of the previous system. "University of Manchester (UoM) eForms" consists of an app and a web-based administration system that respectively permit high volume data collection and management. UoM eForms has now replaced the preceding paper-based and electronic systems within MMS for workplace-based assessment administration, due to the improved usability and dynamicity built into its interface and infrastructure. This new system has found many further useful applications, including research data collection, feedback, placement evaluations, quality assurance and interview marking.

Linked Data: Forming Partnerships at the Data Layer

Science.gov (United States)

Shepherd, A.; Chandler, C. L.; Arko, R. A.; Jones, M. B.; Hitzler, P.; Janowicz, K.; Krisnadhi, A.; Schildhauer, M.; Fils, D.; Narock, T.; Groman, R. C.; O'Brien, M.; Patton, E. W.; Kinkade, D.; Rauch, S.

2015-12-01

The challenges presented by big data are straining data management software architectures of the past. For smaller existing data facilities, the technical refactoring of software layers become costly to scale across the big data landscape. In response to these challenges, data facilities will need partnerships with external entities for improved solutions to perform tasks such as data cataloging, discovery and reuse, and data integration and processing with provenance. At its surface, the concept of linked open data suggests an uncalculated altruism. Yet, in his concept of five star open data, Tim Berners-Lee explains the strategic costs and benefits of deploying linked open data from the perspective of its consumer and producer - a data partnership. The Biological and Chemical Oceanography Data Management Office (BCO-DMO) addresses some of the emerging needs of its research community by partnering with groups doing complementary work and linking their respective data layers using linked open data principles. Examples will show how these links, explicit manifestations of partnerships, reduce technical debt and provide a swift flexibility for future considerations.

An early look at the Organ Procurement and Transplantation Network explant pathology form data.

Science.gov (United States)

Harper, Ann M; Edwards, Erick; Washburn, W Kenneth; Heimbach, Julie

2016-06-01

In April 2012, the Organ Procurement and Transplantation Network (OPTN) implemented an online explant pathology form for recipients of liver transplantation who received additional wait-list priority for their diagnosis of hepatocellular carcinoma (HCC). The purpose of the form was to standardize the data being reported to the OPTN, which had been required since 2002 but were submitted to the OPTN in a variety of formats via facsimile. From April 2012 to December 2014, over 4500 explant forms were submitted, allowing for detailed analysis of the characteristics of the explanted livers. Data from the explant pathology forms were used to assess agreement with pretransplant imaging. Explant data were also used to assess the risk of recurrence. Of those with T2 priority, 55.7% were found to be stage T2 on explant. Extrahepatic spread (odds ratio [OR] = 6.8; P based on the number and size of tumors on the explant form was T4 (OR = 2.4; P < 0.01) were the strongest predictors of recurrence. In conclusion, this analysis confirms earlier findings that showed an incomplete agreement between pretransplant imaging and posttransplant pathology in terms of HCC staging, though the number of patients with both no pretransplant treatment and no tumor in the explant was reduced from 20% to <1%. In addition, several factors were identified (eg, tumor burden, age, sex, region, ablative therapy, alpha-fetoprotein, Milan stage, vascular invasion, satellite lesions, etc.) that were predictive of HCC recurrence, allowing for more targeted surveillance of high-risk recipients. Continued evaluation of these data will help shape future guidelines or policy recommendations. Liver Transplantation 22 757-764 2016 AASLD. © 2016 American Association for the Study of Liver Diseases.

Closed-form kinetic parameter estimation solution to the truncated data problem

International Nuclear Information System (INIS)

Zeng, Gengsheng L; Kadrmas, Dan J; Gullberg, Grant T

2010-01-01

In a dedicated cardiac single photon emission computed tomography (SPECT) system, the detectors are focused on the heart and the background is truncated in the projections. Reconstruction using truncated data results in biased images, leading to inaccurate kinetic parameter estimates. This paper has developed a closed-form kinetic parameter estimation solution to the dynamic emission imaging problem. This solution is insensitive to the bias in the reconstructed images that is caused by the projection data truncation. This paper introduces two new ideas: (1) it includes background bias as an additional parameter to estimate, and (2) it presents a closed-form solution for compartment models. The method is based on the following two assumptions: (i) the amount of the bias is directly proportional to the truncated activities in the projection data, and (ii) the background concentration is directly proportional to the concentration in the myocardium. In other words, the method assumes that the image slice contains only the heart and the background, without other organs, that the heart is not truncated, and that the background radioactivity is directly proportional to the radioactivity in the blood pool. As long as the background activity can be modeled, the proposed method is applicable regardless of the number of compartments in the model. For simplicity, the proposed method is presented and verified using a single compartment model with computer simulations using both noiseless and noisy projections.

CTEPP DATA COLLECTION FORM 05: CHILD DAY CARE CENTER PRE-MONITORING QUESTIONNAIRE

Science.gov (United States)

This data collection form is used to identify the potential sources of pollutants at the day care center. The day care teacher is asked questions related to the age of their day care building; age and frequency of cleaning carpets or rugs; types of heating and air conditioning de...

Classification of distribution coefficient data by mineral components and chemical forms

International Nuclear Information System (INIS)

Takeda, Seiji; Kimura, Hideo; Matsuzuru, Hideo

1996-01-01

The use of distribution coefficient (Kd) in radionuclide transport model has been reported in a number of papers. However, Kd data cover a wide range even for a specific element. In this study the Kd data of neptunium, uranium and selenium, which are included in sorption database (SDB, OECD/NEA) of radionuclides, were classified by a solid phase and a dominant species in a solution. The aqueous species of these elements were estimated by a geochemical model. The Kd data classified by the analyzed speciation were tested by a nonparametric statistical method. The results of tests proved that the Kd data of neptunium or uranium, which covered a wide range, were influenced by the supersaturation of Np(OH) 4 (s) or schoepite. The Kd data of neptunium could be classified by the dominant aqueous species, NpO 2 + , NpO 2 CO 3 - , NpO 2 OH(aq) and Np(OH) 4 (aq). The Kd data of these four dominant species which are not equilibrated with supersaturated Np(OH) 4 (s) are less than 100 ml/g. The analyzed aqueous species of uranium were UO 2 (OH) 2 (aq) and UO 2 (CO 3 ) n 2-2n (n=2,3) in hexavalent state. It is suggested that the distribution coefficient of neptunium and uranium depends on dominant aqueous species or charged species, i.e., cationic, anionic and nonionic forms. The dominant aqueous species of selenium are HSe - , HSeO 3 - , SeO 3 2- and SeO 4 2- . The result of the nonparametric statistical test shows that the Kd value of HSeO 3 - is higher than of other anionic forms. However, the influence of the species, HSe - , SeO 3 2- and SeO 4 2- , on Kd values is not clearly identified. Considering the dominant species, the Kd of elements are in ranges of 1 to 2 orders of magnitude being in general narrower than those classified by mineral and rock types. (author)

Data Availability and Model Form

NARCIS (Netherlands)

Tavasszy, L.A.; Jong, G. de

2013-01-01

Data are essential for any empirical modelling effort. In freight transport, obtaining good data for modelling can be a challenge because of the difficulty to observe freight processes directly, the often proprietary nature of logistics data, and a relatively poor data acquisition infrastructure. In

Short Forms of Wechsler Scales Assessing the Intellectually Gifted Children Using Simulation Data

Directory of Open Access Journals (Sweden)

Alexandre Aubry

2018-05-01

Full Text Available Intellectual giftedness is usually defined in terms of having a very high Intellectual Quotient (IQ. The intellectual capacity is assessed by a standardized test such as the Wechsler Intelligence Scale for Children (WISC. However, the identification of intellectually gifted children (IGC often remains time-consuming. A short-form WISC can be used as a screening instrument. The practitioners and researchers in this field can then make a more in-depth evaluation of the IGC's cognitive and socioemotional characteristics if needed. The aim of our study is thus to determine the best short tests, in terms of their psychometric qualities, for the identification of IGC. The current study is composed of three-step analyses. Firstly, we created nine IQs short forms (IQSF with 2-subtests, and nine IQSF with 4-subtests from the WISC-IV (Wechsler, 2005. Secondly, we estimated psychometric parameters (i.e., reliability and validity from empirical and simulated dataset with WISC-IV. The difference in the estimation of psychometric qualities of each IQSF from the simulated data is very close to those derived from empirical data. We thus selected the three best IQSF based on these psychometrics parameters estimated from simulated datasets. For each selected short form of the WISC-IV, we estimated the screening quality in our sample of IGC. Thirdly, we created IQSF with 2- and 4-subtests from the WISC-V (Wechsler, 2016 with simulated dataset. We then highlighted the three best short forms of WISC-V based on the estimated psychometric parameters. The results are interpreted in terms of validity, reliability and screening quality of IGC. In spite of the important changes in the WISC-V, our findings show that the 2-subtest form, Similitaries + Matrix Reasoning, and 4-subtest form, Similitaries + Vocabulary + Matrix Reasoning + Block Design, are the most efficient to identify the IGC at the two recent versions of Wechsler scales. Finally, we discuss the advantages

Model analysis of the world data on the pion transition form factor

International Nuclear Information System (INIS)

Noguera, S.; Vento, V.

2012-01-01

We discuss the impact of recent Belle data on our description of the pion transition form factor based on the assumption that a perturbative formalism and a nonperturbative one can be matched in a physically acceptable manner at a certain hadronic scale Q 0 . We discuss the implications of the different parameters of the model in comparing with world data and conclude that within experimental errors our description remains valid. Thus we can assert that the low Q 2 nonperturbative description together with an additional 1/Q 2 term at the matching scale have a strong influence on the Q 2 behavior up to very high values of Q 2 . (orig.)

A special form of SPD covariance matrix for interpretation and visualization of data manipulated with Riemannian geometry

Science.gov (United States)

Congedo, Marco; Barachant, Alexandre

2015-01-01

Currently the Riemannian geometry of symmetric positive definite (SPD) matrices is gaining momentum as a powerful tool in a wide range of engineering applications such as image, radar and biomedical data signal processing. If the data is not natively represented in the form of SPD matrices, typically we may summarize them in such form by estimating covariance matrices of the data. However once we manipulate such covariance matrices on the Riemannian manifold we lose the representation in the original data space. For instance, we can evaluate the geometric mean of a set of covariance matrices, but not the geometric mean of the data generating the covariance matrices, the space of interest in which the geometric mean can be interpreted. As a consequence, Riemannian information geometry is often perceived by non-experts as a "black-box" tool and this perception prevents a wider adoption in the scientific community. Hereby we show that we can overcome this limitation by constructing a special form of SPD matrix embedding both the covariance structure of the data and the data itself. Incidentally, whenever the original data can be represented in the form of a generic data matrix (not even square), this special SPD matrix enables an exhaustive and unique description of the data up to second-order statistics. This is achieved embedding the covariance structure of both the rows and columns of the data matrix, allowing naturally a wide range of possible applications and bringing us over and above just an interpretability issue. We demonstrate the method by manipulating satellite images (pansharpening) and event-related potentials (ERPs) of an electroencephalography brain-computer interface (BCI) study. The first example illustrates the effect of moving along geodesics in the original data space and the second provides a novel estimation of ERP average (geometric mean), showing that, in contrast to the usual arithmetic mean, this estimation is robust to outliers. In

Standardizing data exchange for clinical research protocols and case report forms: An assessment of the suitability of the Clinical Data Interchange Standards Consortium (CDISC) Operational Data Model (ODM).

Science.gov (United States)

Huser, Vojtech; Sastry, Chandan; Breymaier, Matthew; Idriss, Asma; Cimino, James J

2015-10-01

Efficient communication of a clinical study protocol and case report forms during all stages of a human clinical study is important for many stakeholders. An electronic and structured study representation format that can be used throughout the whole study life-span can improve such communication and potentially lower total study costs. The most relevant standard for representing clinical study data, applicable to unregulated as well as regulated studies, is the Operational Data Model (ODM) in development since 1999 by the Clinical Data Interchange Standards Consortium (CDISC). ODM's initial objective was exchange of case report forms data but it is increasingly utilized in other contexts. An ODM extension called Study Design Model, introduced in 2011, provides additional protocol representation elements. Using a case study approach, we evaluated ODM's ability to capture all necessary protocol elements during a complete clinical study lifecycle in the Intramural Research Program of the National Institutes of Health. ODM offers the advantage of a single format for institutions that deal with hundreds or thousands of concurrent clinical studies and maintain a data warehouse for these studies. For each study stage, we present a list of gaps in the ODM standard and identify necessary vendor or institutional extensions that can compensate for such gaps. The current version of ODM (1.3.2) has only partial support for study protocol and study registration data mainly because it is outside the original development goal. ODM provides comprehensive support for representation of case report forms (in both the design stage and with patient level data). Inclusion of requirements of observational, non-regulated or investigator-initiated studies (outside Food and Drug Administration (FDA) regulation) can further improve future revisions of the standard. Published by Elsevier Inc.

Secondary Waste Form Down-Selection Data Package—DuraLith

Energy Technology Data Exchange (ETDEWEB)

Mattigod, Shas V.; Westsik, Joseph H.

2011-09-15

This data package developed for the DuraLith wasteform includes information available in the open literature and from data obtained from testing currently underway. DuraLith is an alkali-activated geopolymer waste form developed by the Vitreous State Laboratory at The Catholic University of America (VSL-CUA) for encapsulating liquid radioactive waste. A DuraLith waste form developed for treating Hanford secondary waste liquids is prepared by alkali-activation of a mixture of ground blast furnace slag and metakaolinite with sand used as a filler material. Based on optimization tests, solid waste loading of {approx}7.5% and {approx}14.7 % has been achieved using the Hanford secondary waste S1 and S4 simulants, respectively. The Na loading in both cases is equivalent to {approx}6 M. Some of the critical parameters for the DuraLith process include, hydrogen generation and heat evolution during activator solution preparation using the waste simulant, heat evolution during and after mixing the activator solution with the dry ingredients, and a working window of {approx}20 minutes to complete the pouring of the DuraLith mixture into molds. Results of the most recent testing indicated that the working window can be extended to {approx}30 minutes if 75 wt% of the binder components, namely, blast furnace slag and metakaolin are replaced by Class F fly ash. A preliminary DuraLith process flow sheet developed by VSL-CUA for processing Hanford secondary waste indicated that 10 to 22 waste monoliths (each 48 ft3 in volume) can be produced per day. There are no current pilot-scale or full-scale DuraLith plants under construction or in operation; therefore, the cost of DuraLith production is unknown. The results of the non-regulatory leach tests, EPA Draft 1313 and 1316, Waste Simulant S1-optimized DuraLith specimens indicated that the concentrations of RCRA metals (Ag, Cd, Cr, Hg, and Pb) in the leachates were well below the Universal Treatment Standard limits in 40 CFR 268

Underestimated Halogen Bonds Forming with Protein Backbone in Protein Data Bank.

Science.gov (United States)

Zhang, Qian; Xu, Zhijian; Shi, Jiye; Zhu, Weiliang

2017-07-24

Halogen bonds (XBs) are attracting increasing attention in biological systems. Protein Data Bank (PDB) archives experimentally determined XBs in biological macromolecules. However, no software for structure refinement in X-ray crystallography takes into account XBs, which might result in the weakening or even vanishing of experimentally determined XBs in PDB. In our previous study, we showed that side-chain XBs forming with protein side chains are underestimated in PDB on the basis of the phenomenon that the proportion of side-chain XBs to overall XBs decreases as structural resolution becomes lower and lower. However, whether the dominant backbone XBs forming with protein backbone are overlooked is still a mystery. Here, with the help of the ratio (R F ) of the observed XBs' frequency of occurrence to their frequency expected at random, we demonstrated that backbone XBs are largely overlooked in PDB, too. Furthermore, three cases were discovered possessing backbone XBs in high resolution structures while losing the XBs in low resolution structures. In the last two cases, even at 1.80 Å resolution, the backbone XBs were lost, manifesting the urgent need to consider XBs in the refinement process during X-ray crystallography study.

Availability of nuclear decay data in electronic form, including beta spectra not previously published

International Nuclear Information System (INIS)

Eckerman, K.F.; Westfall, R.J.; Ryman, J.C.; Cristy, M.

1994-01-01

The unabridged data used in preparing ICRP Publication 38 (1983) and a monograph of the Medical Internal Radiation Dose (MIRD) Committee are now available in electronic form. The open-quotes ICRP38 collectionclose quotes contains data on the energies and intensities of radiations emitted by 825 radionuclides (those in ICRP Publication 38 plus 13 from the MIRD monograph), and the open-quotes MIRD collectionclose quotes contains data on 242 radionuclides. Each collection consists of a radiations data file and a beta spectra data file. The radiations data file contains the complete listing of the emitted radiations, their types, mean or unique energies, and absolute intensities for each radionuclide, the probability that a beta particle will be emitted with kinetic energies defined by a standard energy grid. Although summary information from the radiation data files has been published, neither the unabridged data nor the beta spectra have been published. These data files and a data extraction utility, which runs on a personal computer, are available from the Radiation Shielding Information Center at Oak Ridge National Laboratory. 13 refs., 1 fig., 6 tabs

A realistic closed-form radiobiological model of clinical tumor-control data incorporating intertumor heterogeneity

International Nuclear Information System (INIS)

Roberts, Stephen A.; Hendry, Jolyon H.

1998-01-01

Purpose: To investigate the role of intertumor heterogeneity in clinical tumor control datasets and the relationship to in vitro measurements of tumor biopsy samples. Specifically, to develop a modified linear-quadratic (LQ) model incorporating such heterogeneity that it is practical to fit to clinical tumor-control datasets. Methods and Materials: We developed a modified version of the linear-quadratic (LQ) model for tumor control, incorporating a (lagged) time factor to allow for tumor cell repopulation. We explicitly took into account the interpatient heterogeneity in clonogen number, radiosensitivity, and repopulation rate. Using this model, we could generate realistic TCP curves using parameter estimates consistent with those reported from in vitro studies, subject to the inclusion of a radiosensitivity (or dose)-modifying factor. We then demonstrated that the model was dominated by the heterogeneity in α (tumor radiosensitivity) and derived an approximate simplified model incorporating this heterogeneity. This simplified model is expressible in a compact closed form, which it is practical to fit to clinical datasets. Using two previously analysed datasets, we fit the model using direct maximum-likelihood techniques and obtained parameter estimates that were, again, consistent with the experimental data on the radiosensitivity of primary human tumor cells. This heterogeneity model includes the same number of adjustable parameters as the standard LQ model. Results: The modified model provides parameter estimates that can easily be reconciled with the in vitro measurements. The simplified (approximate) form of the heterogeneity model is a compact, closed-form probit function that can readily be fitted to clinical series by conventional maximum-likelihood methodology. This heterogeneity model provides a slightly better fit to the datasets than the conventional LQ model, with the same numbers of fitted parameters. The parameter estimates of the clinically

Organized Communities as a Hybrid Form of Data Sharing: Experiences from the Global STEP Project

Directory of Open Access Journals (Sweden)

Isabell Stamm

2018-01-01

Full Text Available With this article, I explore a new way of how social scientists can share primary qualitative data with each other. More specifically, I examine organized research communities, which are small membership groups of scholars. This hybrid form of data sharing is positioned between informal sharing through collaboration and institutionalized sharing through accessing research archives. Using the global "Successful Transgenerational Entrepreneurship Practices" (STEP project as an example, I draw attention to the pragmatic practices of data sharing in such communities. Through ongoing negotiations, organized communities can, at least temporarily, put forward sharing policies and create a culture of data sharing that elevates the re-use of qualitative data while being mindful of the data's intersubjective and processual character.

Direct compatibility check of the CEA and Cornell electroproduction pion form factor data with e+e- ones

International Nuclear Information System (INIS)

Dubnicka, S.; Martinovic, L.

1988-01-01

Using precise experimental information on the imaginary part of the pion form factor from e + e - → π + π - up to the inelastic threshold and QCD constraints for it in the range of momenta (m π 0 +m ω ) 2 < t < infinity, was investigated by means of a dispersion integral the reliability of individual electroproduction CEA and Cornell model-dependent pion form factor data points

Zr inclusions in actinide—Zr alloys: New data and ideas about how they form

International Nuclear Information System (INIS)

Janney, Dawn E.; O'Holleran, Thomas P.

2015-01-01

High-Zr inclusions are common in actinide—Zr alloys despite phase diagrams indicating that these alloys should not contain a high-Zr phase. The inclusions may contain enough Zr to cause significant differences between bulk compositions and those of inclusion-free areas, leading to possible errors in interpreting data if the inclusions are not considered. This paper presents data from high-Zr inclusions in a complex U—Np—Pu—Am—Zr—RE alloy. It is suggested that the high-Zr inclusions nucleated as high-Zr solid solutions at interfaces with high-actinide RE liquids, then unmixed to form nanometer-scale high-actinide sub-inclusions.

Designing usable web forms- Empirical evaluation of web form improvement guidelines

DEFF Research Database (Denmark)

Seckler, Mirjam; Heinz, Silvia; Bargas-Avila, Javier A.

2014-01-01

This study reports a controlled eye tracking experiment (N = 65) that shows the combined effectiveness of 20 guidelines to improve interactive online forms when applied to forms found on real company websites. Results indicate that improved web forms lead to faster completion times, fewer form...... submission trials, and fewer eye movements. Data from subjective questionnaires and interviews further show increased user satisfaction. Overall, our findings highlight the importance for web designers to improve their web forms using UX guidelines....

Electromagnetic form factors of hadrons

International Nuclear Information System (INIS)

Zidell, V.S.

1976-01-01

A vector meson dominance model of the electromagnetic form factors of hadrons is developed which is based on the use of unstable particle propagators. Least-square fits are made to the proton, neutron, pion and kaon form factor data in both the space and time-like regions. A good fit to the low-energy nucleon form factor data is obtained using only rho, ω, and phi dominance, and leads to a determination of the vector meson resonance parameters in good agreement with experiment. The nucleon-vector meson coupling constants obey simple sum rules indicating that there exists no hard core contribution to the form factors within theoretical uncertainties. The prediction for the electromagnetic radii of the proton is in reasonable agreement with recent experiments. The pion and kaon charge form factors as deduced from the nucleon form factors assuming vector meson universality are compared to the data. The pion form factor agrees with the data in both the space and time-like regions. The pion charge radius is in agreement with the recent Dubna result, but the isovector P-wave pion-pion phase shift calculated from the theory disagrees with experiment. A possible contribution to the form factors from a heavy rho meson is also evaluated

A mercury programme (autocode programme 5675) for transforming data on the angular distribution of elastically scattered neutrons to one standard form

International Nuclear Information System (INIS)

King, D.C.

1964-04-01

Data on the angular distribution of elastically scattered neutrons are reported in one or another of a variety of different forms. The Mercury autocode programme 5675 transforms the data into a tabular representation of the form (cosθ, p (cosθ)) where p(cosθ) is the normalised probability distribution and θ is the scattering angle in the centre of mass frame of reference. Output on cards punched in the format of the U.K.A.E.A. nuclear data library is optional. (author)

Combining genetic and demographic data for the conservation of a Mediterranean marine habitat-forming species.

Directory of Open Access Journals (Sweden)

Rosana Arizmendi-Mejía

Full Text Available The integration of ecological and evolutionary data is highly valuable for conservation planning. However, it has been rarely used in the marine realm, where the adequate design of marine protected areas (MPAs is urgently needed. Here, we examined the interacting processes underlying the patterns of genetic structure and demographic strucuture of a highly vulnerable Mediterranean habitat-forming species (i.e. Paramuricea clavata (Risso, 1826, with particular emphasis on the processes of contemporary dispersal, genetic drift, and colonization of a new population. Isolation by distance and genetic discontinuities were found, and three genetic clusters were detected; each submitted to variations in the relative impact of drift and gene flow. No founder effect was found in the new population. The interplay of ecology and evolution revealed that drift is strongly impacting the smallest, most isolated populations, where partial mortality of individuals was highest. Moreover, the eco-evolutionary analyses entailed important conservation implications for P. clavata. Our study supports the inclusion of habitat-forming organisms in the design of MPAs and highlights the need to account for genetic drift in the development of MPAs. Moreover, it reinforces the importance of integrating genetic and demographic data in marine conservation.

12 CFR Appendix B to Part 203 - Form and Instructions for Data Collection on Ethnicity, Race, and Sex

Science.gov (United States)

2010-01-01

... Ethnicity, Race, and Sex B Appendix B to Part 203 Banks and Banking FEDERAL RESERVE SYSTEM BOARD OF... to Part 203—Form and Instructions for Data Collection on Ethnicity, Race, and Sex I. Instructions on Collection of Data on Ethnicity, Race, and Sex You may list questions regarding the ethnicity, race, and sex...

Environmental correlates of cycling: Evaluating urban form and location effects based on Danish micro-data

DEFF Research Database (Denmark)

Nielsen, Thomas Alexander Sick; Olafsson, Anton Stahl; Carstensen, Trine Agervig

2013-01-01

The paper analyses the environmental correlates of cycling based on Danish transportation and urban form micro-data. The results show that established walkability factors such as density, connectivity and diversity are related to cycling, but access to retail concentrations/centres, public...... and the distance cycled. A high probability of cycling generally implies short cycling distances leading to non-uniform, non-monotonous relationship between environmental indicators such as walkability and cycling....

49 CFR Appendix H to Part 40 - DOT Drug and Alcohol Testing Management Information System (MIS) Data Collection Form

Science.gov (United States)

2010-10-01

..., App. H Appendix H to Part 40—DOT Drug and Alcohol Testing Management Information System (MIS) Data... 49 Transportation 1 2010-10-01 2010-10-01 false DOT Drug and Alcohol Testing Management Information System (MIS) Data Collection Form H Appendix H to Part 40 Transportation Office of the Secretary...

Standardized waste form test methods

International Nuclear Information System (INIS)

Slate, S.C.

1984-01-01

The Materials Characterization Center (MCC) is developing standard tests to characterize nuclear waste forms. Development of the first thirteen tests was originally initiated to provide data to compare different high-level waste (HLW) forms and to characterize their basic performance. The current status of the first thirteen MCC tests and some sample test results are presented: the radiation stability tests (MCC-6 and 12) and the tensile-strength test (MCC-11) are approved; the static leach tests (MCC-1, 2, and 3) are being reviewed for full approval; the thermal stability (MCC-7) and microstructure evaluation (MCC-13) methods are being considered for the first time; and the flowing leach test methods (MCC-4 and 5), the gas generation methods (MCC-8 and 9), and the brittle fracture method (MCC-10) are indefinitely delayed. Sample static leach test data on the ARM-1 approved reference material are presented. Established tests and proposed new tests will be used to meet new testing needs. For waste form production, tests on stability and composition measurement are needed to provide data to ensure waste form quality. In transporation, data are needed to evaluate the effects of accidents on canisterized waste forms. The new MCC-15 accident test method and some data are presented. Compliance testing needs required by the recent draft repository waste acceptance specifications are described. These specifications will control waste form contents, processing, and performance

Standardized waste form test methods

International Nuclear Information System (INIS)

Slate, S.C.

1984-11-01

The Materials Characterization Center (MCC) is developing standard tests to characterize nuclear waste forms. Development of the first thirteen tests was originally initiated to provide data to compare different high-level waste (HLW) forms and to characterize their basic performance. The current status of the first thirteen MCC tests and some sample test results is presented: The radiation stability tests (MCC-6 and 12) and the tensile-strength test (MCC-11) are approved; the static leach tests (MCC-1, 2, and 3) are being reviewed for full approval; the thermal stability (MCC-7) and microstructure evaluation (MCC-13) methods are being considered for the first time; and the flowing leach tests methods (MCC-4 and 5), the gas generation methods (MCC-8 and 9), and the brittle fracture method (MCC-10) are indefinitely delayed. Sample static leach test data on the ARM-1 approved reference material are presented. Established tests and proposed new tests will be used to meet new testing needs. For waste form production, tests on stability and composition measurement are needed to provide data to ensure waste form quality. In transportation, data are needed to evaluate the effects of accidents on canisterized waste forms. The new MCC-15 accident test method and some data are presented. Compliance testing needs required by the recent draft repository waste acceptance specifications are described. These specifications will control waste form contents, processing, and performance. 2 references, 2 figures

Temporal stability of the Francis Scale of Attitude toward Christianity short-form: test-retest data over one week.

Science.gov (United States)

Lewis, Christopher Alan; Cruise, Sharon Mary; McGuckin, Conor

2005-04-01

This study evaluated the test-retest reliability of the Francis Scale of Attitude toward Christianity short-form. 39 Northern Irish undergraduate students completed the measure on two occasions separated by one week. Stability across the two administrations was high, r = .92, and there was no significant change between Time 1(M = 25.2, SD = 5.4) and Time 2 (M = 25.7, SD = 6.2). These data support the short-term test-retest reliability of the Francis Scale of Attitude toward Christianity short-form.

Data Package for Secondary Waste Form Down-Selection-Cast Stone

International Nuclear Information System (INIS)

Serne, R. Jeffrey; Westsik, Joseph H.

2011-01-01

Available literature on Cast Stone and Saltstone was reviewed with an emphasis on determining how Cast Stone and related grout waste forms performed in relationship to various criteria that will be used to decide whether a specific type of waste form meets acceptance criteria for disposal in the Integrated Disposal Facility (IDF) at Hanford. After the critical review of the Cast Stone/Saltstone literature, we conclude that Cast Stone is a good candidate waste form for further consideration. Cast stone meets the target IDF acceptance criteria for compressive strength, no free liquids, TCLP leachate are below the UTS permissible concentrations and leach rates for Na and Tc-99 are suiteably low. The cost of starting ingredients and equipment necessary to generate Cast Stone waste forms with secondary waste streams are low and the Cast Stone dry blend formulation can be tailored to accommodate variations in liquid waste stream compositions. The database for Cast Stone short-term performance is quite extensive compared to the other three candidate waste solidification processes. The solidification of liquid wastes in Cast Stone is a mature process in comparison to the other three candidates. Successful production of Cast Stone or Saltstone has been demonstrated from lab-scale monoliths with volumes of cm3 through m3 sized blocks to 210-liter sized drums all the way to the large pours into vaults at Savannah River. To date over 9 million gallons of low activity liquid waste has been solidified and disposed in concrete vaults at Savannah River.

Data Package for Secondary Waste Form Down-Selection—Cast Stone

Energy Technology Data Exchange (ETDEWEB)

Serne, R. Jeffrey; Westsik, Joseph H.

2011-09-05

Available literature on Cast Stone and Saltstone was reviewed with an emphasis on determining how Cast Stone and related grout waste forms performed in relationship to various criteria that will be used to decide whether a specific type of waste form meets acceptance criteria for disposal in the Integrated Disposal Facility (IDF) at Hanford. After the critical review of the Cast Stone/Saltstone literature, we conclude that Cast Stone is a good candidate waste form for further consideration. Cast stone meets the target IDF acceptance criteria for compressive strength, no free liquids, TCLP leachate are below the UTS permissible concentrations and leach rates for Na and Tc-99 are suiteably low. The cost of starting ingredients and equipment necessary to generate Cast Stone waste forms with secondary waste streams are low and the Cast Stone dry blend formulation can be tailored to accommodate variations in liquid waste stream compositions. The database for Cast Stone short-term performance is quite extensive compared to the other three candidate waste solidification processes. The solidification of liquid wastes in Cast Stone is a mature process in comparison to the other three candidates. Successful production of Cast Stone or Saltstone has been demonstrated from lab-scale monoliths with volumes of cm3 through m3 sized blocks to 210-liter sized drums all the way to the large pours into vaults at Savannah River. To date over 9 million gallons of low activity liquid waste has been solidified and disposed in concrete vaults at Savannah River.

Waste Form Release Data Package for the 2001 Immobilized Low-Activity Waste Performance Assessment

Energy Technology Data Exchange (ETDEWEB)

McGrail, B. Peter; Icenhower, Jonathan P.; Martin, Paul F.; Schaef, Herbert T.; O' Hara, Matthew J.; Rodriguez, Eugenio; Steele, Jackie L.

2001-02-01

This data package documents the experimentally derived input data on the representative waste glasses LAWABP1 and HLP-31 that will be used for simulations of the immobilized lowactivity waste disposal system with the Subsurface Transport Over Reactive Multiphases (STORM) code. The STORM code will be used to provide the near-field radionuclide release source term for a performance assessment to be issued in March of 2001. Documented in this data package are data related to 1) kinetic rate law parameters for glass dissolution, 2) alkali-H ion exchange rate, 3) chemical reaction network of secondary phases that form in accelerated weathering tests, and 4) thermodynamic equilibrium constants assigned to these secondary phases. The kinetic rate law and Na+-H+ ion exchange rate were determined from single-pass flow-through experiments. Pressurized unsaturated flow and vapor hydration experiments were used for accelerated weathering or aging of the glasses. The majority of the thermodynamic data were extracted from the thermodynamic database package shipped with the geochemical code EQ3/6. However, several secondary reaction products identified from laboratory tests with prototypical LAW glasses were not included in this database, nor are the thermodynamic data available in the open literature. One of these phases, herschelite, was determined to have a potentially significant impact on the release calculations and so a solubility product was estimated using a polymer structure model developed for zeolites. Although this data package is relatively complete, final selection of ILAW glass compositions has not been done by the waste treatment plant contractor. Consequently, revisions to this data package to address new ILAW glass formulations are to be regularly expected.

Comparative waste forms study

International Nuclear Information System (INIS)

Wald, J.W.; Lokken, R.O.; Shade, J.W.; Rusin, J.M.

1980-12-01

A number of alternative process and waste form options exist for the immobilization of nuclear wastes. Although data exists on the characterization of these alternative waste forms, a straightforward comparison of product properties is difficult, due to the lack of standardized testing procedures. The characterization study described in this report involved the application of the same volatility, mechanical strength and leach tests to ten alternative waste forms, to assess product durability. Bulk property, phase analysis and microstructural examination of the simulated products, whose waste loading varied from 5% to 100% was also conducted. The specific waste forms investigated were as follows: Cold Pressed and Sintered PW-9 Calcine; Hot Pressed PW-9 Calcine; Hot Isostatic Pressed PW-9 Calcine; Cold Pressed and Sintered SPC-5B Supercalcine; Hot Isostatic pressed SPC-5B Supercalcine; Sintered PW-9 and 50% Glass Frit; Glass 76-68; Celsian Glass Ceramic; Type II Portland Cement and 10% PW-9 Calcine; and Type II Portland Cement and 10% SPC-5B Supercalcine. Bulk property data were used to calculate and compare the relative quantities of waste form volume produced at a spent fuel processing rate of 5 metric ton uranium/day. This quantity ranged from 3173 L/day (5280 Kg/day) for 10% SPC-5B supercalcine in cement to 83 L/day (294 Kg/day) for 100% calcine. Mechanical strength, volatility, and leach resistance tests provide data related to waste form durability. Glass, glass-ceramic and supercalcine ranked high in waste form durability where as the 100% PW-9 calcine ranked low. All other materials ranked between these two groupings

The K-meson form factor and charge radius: linking low-energy data to future Jefferson Laboratory measurements

Energy Technology Data Exchange (ETDEWEB)

Krutov, A.F. [Samara University, Samara (Russian Federation); Troitsky, S.V. [Institute for Nuclear Research of the Russian Academy of Sciences, 60th October Anniversary Prospect 7a, Moscow (Russian Federation); Troitsky, V.E. [M.V. Lomonosov Moscow State University, D.V. Skobeltsyn Institute of Nuclear Physics, Moscow (Russian Federation)

2017-07-15

Starting from a successful model of the π-meson electromagnetic form factor, we calculate a similar form factor, F{sub K}(Q{sup 2}), of the charged K meson for a wide range of the momentum transfer squared, Q{sup 2}. The only remaining free parameter is to be determined from the measurements of the K-meson charge radius, r{sub K}. We fit this single parameter to the published data of the NA-7 experiment which measured F{sub K}(Q{sup 2}) at Q{sup 2} → 0 and determine our preferred range of r{sub K}, which happens to be close to recent lattice results. Still, the accuracy in the determination of r{sub K} is poor. However, future measurements of the K-meson electromagnetic form factor at Q{sup 2}

Conceptual waste package interim product specifications and data requirements for disposal of glass commercial high-level waste forms in salt geologic repositories

International Nuclear Information System (INIS)

1983-10-01

The conceptual waste package interim product specifications and data requirements presented are applicable to the reference glass composition described in PNL-3838 and carbon steel canister described in ONWI-438. They provide preliminary numerical values for the commercial high-level waste form parameters and properties identified in the waste form performance specification for geologic isolation in salt repositories. Subject areas treated include containment and isolation, operational period safety, criticality control, waste form/production canister identification, and waste package performance testing requirements. This document was generated for use in the development of conceptual waste package designs in salt. It will be revised as additional data, analyses and regulatory requirements become available. 13 references, 1 figure

49 CFR 40.26 - What form must an employer use to report Management Information System (MIS) data to a DOT agency?

Science.gov (United States)

2010-10-01

... 49 Transportation 1 2010-10-01 2010-10-01 false What form must an employer use to report Management Information System (MIS) data to a DOT agency? 40.26 Section 40.26 Transportation Office of the... Employer Responsibilities § 40.26 What form must an employer use to report Management Information System...

Conceptual waste package interim product specifications and data requirements for disposal of borosilicate glass defense high-level waste forms in salt geologic repositories

International Nuclear Information System (INIS)

1983-06-01

The conceptual waste package interim product specifications and data requirements presented are applicable specifically to the normal borosilicate glass product of the Defense Waste Processing Facility (DWPF). They provide preliminary numerical values for the defense high-level waste form parameters and properties identified in the waste form performance specification for geologic isolation in salt repositories. Subject areas treated include containment and isolation, operational period safety, criticality control, waste form/production canister identification, and waste package performance testing requirements. This document was generated for use in the development of conceptual waste package designs in salt. It will be revised as additional data, analyses, and regulatory requirements become available

Access Customized Forms

OpenAIRE

Cosma Emil; Jeflea Victor

2010-01-01

By using Word, Excel or PowerPoint one can automate routine operations using the VBA language (Visual Basic for Applications). This language is also used in Access, allowing access to data stored in tables or queries. Thus, Access and VBA resources can be used together. Access is designed for programming forms and reports (among other things), so there won’t be found any of the VBA editor’s specific forms.

Chou-Yang model and PHI form factor

Energy Technology Data Exchange (ETDEWEB)

Fazal-e-Aleem; Saleem, M.; Rafique, M.

1988-03-01

By using the deduced differential cross-section data for PHIp elastic scattering at 175 GeV/c in the Chou-Yang model, the PHI form factor has been computed and parametrized. Then in conjunction with the proton form factor this form factor is used in the pristine Chou-Yang model to obtain differential cross-section data at Fermilab energies. The theoretical results agree with the experimental measurements, endorsing the conjecture that the hadronic form factor of neutral particle is proportional to its magnetic form factor.

Mixing of fluids in hydrothermal ore-forming (Sn,W) systems: stable isotope and rare earth elements data

Science.gov (United States)

Sushchevskaya, T. M.; Popova, J. A.; Velivetskaya, T. A.; Ignatiev, A. V.; Matveeva, S. S.; Limantseva, O. A.

2012-04-01

Experimental and physico-chemical modeling data witness to important role of mixing of different type of fluids during tin and tungsten ore formation in hydrothermal systems. Mixing of magmatogeneous fluids, exsolved from granite melts, with exogenic, initially meteoric waters in hydrothermal ore-forming systems may change chemical composition of ore-forming fluid, causing cassiterite and/or wolframite precipitation (Heinrich, 1990; Sushchevskaya, Ryzhenko, 2002). We studied the process of genetically different fluids mixing for two economic Sn-W deposits, situated in the Iultin ore region (North-East of Russia, Chukotka Penninsula). The Iultin and Svetloe deposits are located in the apical parts of close situated leucogranite stocks, formed at the final stage of the Iultin complex emplacement. Both deposits are composed of a series of quartz veins among the flyschoid rocks (T 1-2), cut by the dikes (K1) of lamprophyre, granodiorite porphyre and alpite. The veins of the deposits are dominated by the productive quartz-wolframite-cassiterite-arsenopyrite-muscovite mineral assemblage. Topaz, beryl, fluorite, and albite occur sporadically. The later sulfide (loellingite-stannite-chalcopyrite) and quartz-fluorite-calcite assemblages show insignificant development. The preore quartz veinlets in host hornfels contain disseminated iron sulfides, chalcopyrite, muscovite. Isotopic (H, O, Ar) study of minerals, supplemented by oxygen isotope data of host granites and metamorphic rocks gave us possibility to conclude, that at the Iultin and the Svetloye deposits fluid mixing was fixed on the early stages of deposit formation and could be regarded as probable cause of metal (W, Sn) precipitation. During postore time the intensive involvement of isotopically light exogenic waters have changed: a) the initial character of oxygen isotope zonality; b) the initial hydrogen isotope composition of muscovites, up to meteoric calculated values for productive fluid (while the δ18O

Quantifying and reducing model-form uncertainties in Reynolds-averaged Navier–Stokes simulations: A data-driven, physics-informed Bayesian approach

International Nuclear Information System (INIS)

Xiao, H.; Wu, J.-L.; Wang, J.-X.; Sun, R.; Roy, C.J.

2016-01-01

Despite their well-known limitations, Reynolds-Averaged Navier–Stokes (RANS) models are still the workhorse tools for turbulent flow simulations in today's engineering analysis, design and optimization. While the predictive capability of RANS models depends on many factors, for many practical flows the turbulence models are by far the largest source of uncertainty. As RANS models are used in the design and safety evaluation of many mission-critical systems such as airplanes and nuclear power plants, quantifying their model-form uncertainties has significant implications in enabling risk-informed decision-making. In this work we develop a data-driven, physics-informed Bayesian framework for quantifying model-form uncertainties in RANS simulations. Uncertainties are introduced directly to the Reynolds stresses and are represented with compact parameterization accounting for empirical prior knowledge and physical constraints (e.g., realizability, smoothness, and symmetry). An iterative ensemble Kalman method is used to assimilate the prior knowledge and observation data in a Bayesian framework, and to propagate them to posterior distributions of velocities and other Quantities of Interest (QoIs). We use two representative cases, the flow over periodic hills and the flow in a square duct, to evaluate the performance of the proposed framework. Both cases are challenging for standard RANS turbulence models. Simulation results suggest that, even with very sparse observations, the obtained posterior mean velocities and other QoIs have significantly better agreement with the benchmark data compared to the baseline results. At most locations the posterior distribution adequately captures the true model error within the developed model form uncertainty bounds. The framework is a major improvement over existing black-box, physics-neutral methods for model-form uncertainty quantification, where prior knowledge and details of the models are not exploited. This approach has

Quantifying and reducing model-form uncertainties in Reynolds-averaged Navier–Stokes simulations: A data-driven, physics-informed Bayesian approach

Energy Technology Data Exchange (ETDEWEB)

Xiao, H., E-mail: hengxiao@vt.edu; Wu, J.-L.; Wang, J.-X.; Sun, R.; Roy, C.J.

2016-11-01

Despite their well-known limitations, Reynolds-Averaged Navier–Stokes (RANS) models are still the workhorse tools for turbulent flow simulations in today's engineering analysis, design and optimization. While the predictive capability of RANS models depends on many factors, for many practical flows the turbulence models are by far the largest source of uncertainty. As RANS models are used in the design and safety evaluation of many mission-critical systems such as airplanes and nuclear power plants, quantifying their model-form uncertainties has significant implications in enabling risk-informed decision-making. In this work we develop a data-driven, physics-informed Bayesian framework for quantifying model-form uncertainties in RANS simulations. Uncertainties are introduced directly to the Reynolds stresses and are represented with compact parameterization accounting for empirical prior knowledge and physical constraints (e.g., realizability, smoothness, and symmetry). An iterative ensemble Kalman method is used to assimilate the prior knowledge and observation data in a Bayesian framework, and to propagate them to posterior distributions of velocities and other Quantities of Interest (QoIs). We use two representative cases, the flow over periodic hills and the flow in a square duct, to evaluate the performance of the proposed framework. Both cases are challenging for standard RANS turbulence models. Simulation results suggest that, even with very sparse observations, the obtained posterior mean velocities and other QoIs have significantly better agreement with the benchmark data compared to the baseline results. At most locations the posterior distribution adequately captures the true model error within the developed model form uncertainty bounds. The framework is a major improvement over existing black-box, physics-neutral methods for model-form uncertainty quantification, where prior knowledge and details of the models are not exploited. This approach

Googling your hand hygiene data: Using Google Forms, Google Sheets, and R to collect and automate analysis of hand hygiene compliance monitoring.

Science.gov (United States)

Wiemken, Timothy L; Furmanek, Stephen P; Mattingly, William A; Haas, Janet; Ramirez, Julio A; Carrico, Ruth M

2018-06-01

Hand hygiene is one of the most important interventions in the quest to eliminate healthcare-associated infections, and rates in healthcare facilities are markedly low. Since hand hygiene observation and feedback are critical to improve adherence, we created an easy-to-use, platform-independent hand hygiene data collection process and an automated, on-demand reporting engine. A 3-step approach was used for this project: 1) creation of a data collection form using Google Forms, 2) transfer of data from the form to a spreadsheet using Google Spreadsheets, and 3) creation of an automated, cloud-based analytics platform for report generation using R and RStudio Shiny software. A video tutorial of all steps in the creation and use of this free tool can be found on our YouTube channel: https://www.youtube.com/watch?v=uFatMR1rXqU&t. The on-demand reporting tool can be accessed at: https://crsp.louisville.edu/shiny/handhygiene. This data collection and automated analytics engine provides an easy-to-use environment for evaluating hand hygiene data; it also provides rapid feedback to healthcare workers. By reducing some of the data management workload required of the infection preventionist, more focused interventions may be instituted to increase global hand hygiene rates and reduce infection. Copyright © 2018 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

West Coast Canopy-Forming Kelp, 1989-2014

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — These data include the general extents of canopy-forming kelp surveys from 1989 to 2014 and a compilation of existing data sets delineating canopy-forming kelp beds...

FIM-Minimum Data Set Motor Item Bank: Short Forms Development and Precision Comparison in Veterans.

Science.gov (United States)

Li, Chih-Ying; Romero, Sergio; Simpson, Annie N; Bonilha, Heather S; Simpson, Kit N; Hong, Ickpyo; Velozo, Craig A

2018-03-01

To improve the practical use of the short forms (SFs) developed from the item bank, we compared the measurement precision of the 4- and 8-item SFs generated from a motor item bank composed of the FIM and the Minimum Data Set (MDS). The FIM-MDS motor item bank allowed scores generated from different instruments to be co-calibrated. The 4- and 8-item SFs were developed based on Rasch analysis procedures. This article compared person strata, ceiling/floor effects, and test SE plots for each administration form and examined 95% confidence interval error bands of anchored person measures with the corresponding SFs. We used 0.3 SE as a criterion to reflect a reliability level of .90. Veterans' inpatient rehabilitation facilities and community living centers. Veterans (N=2500) who had both FIM and the MDS data within 6 days during 2008 through 2010. Not applicable. Four- and 8-item SFs of FIM, MDS, and FIM-MDS motor item bank. Six SFs were generated with 4 and 8 items across a range of difficulty levels from the FIM-MDS motor item bank. The three 8-item SFs all had higher correlations with the item bank (r=.82-.95), higher person strata, and less test error than the corresponding 4-item SFs (r=.80-.90). The three 4-item SFs did not meet the criteria of SE bank composed of existing instruments across the continuum of care in veterans. We also found that the number of items, not test specificity, determines the precision of the instrument. Copyright © 2017 American Congress of Rehabilitation Medicine. All rights reserved.

Teaching Form as Form

DEFF Research Database (Denmark)

Keiding, Tina Bering

2012-01-01

understanding of form per se, or, to use an expression from this text, of form as form. This challenge can be reduced to one question: how can design teaching support students in achieving not only the ability to recognize and describe different form-related concepts in existing design (i.e. analytical...

Determination of GMPE functional form for an active region with limited strong motion data: application to the Himalayan region

Science.gov (United States)

Bajaj, Ketan; Anbazhagan, P.

2018-01-01

Advancement in the seismic networks results in formulation of different functional forms for developing any new ground motion prediction equation (GMPE) for a region. Till date, various guidelines and tools are available for selecting a suitable GMPE for any seismic study area. However, these methods are efficient in quantifying the GMPE but not for determining a proper functional form and capturing the epistemic uncertainty associated with selection of GMPE. In this study, the compatibility of the recent available functional forms for the active region is tested for distance and magnitude scaling. Analysis is carried out by determining the residuals using the recorded and the predicted spectral acceleration values at different periods. Mixed effect regressions are performed on the calculated residuals for determining the intra- and interevent residuals. Additionally, spatial correlation is used in mixed effect regression by changing its likelihood function. Distance scaling and magnitude scaling are respectively examined by studying the trends of intraevent residuals with distance and the trend of the event term with magnitude. Further, these trends are statistically studied for a respective functional form of a ground motion. Additionally, genetic algorithm and Monte Carlo method are used respectively for calculating the hinge point and standard error for magnitude and distance scaling for a newly determined functional form. The whole procedure is applied and tested for the available strong motion data for the Himalayan region. The functional form used for testing are five Himalayan GMPEs, five GMPEs developed under NGA-West 2 project, two from Pan-European, and one from Japan region. It is observed that bilinear functional form with magnitude and distance hinged at 6.5 M w and 300 km respectively is suitable for the Himalayan region. Finally, a new regression coefficient for peak ground acceleration for a suitable functional form that governs the attenuation

FEASIBILITY COMPARISON OF AIRBORNE LASER SCANNING DATA AND 3D-POINT CLOUDS FORMED FROM UNMANNED AERIAL VEHICLE (UAV-BASED IMAGERY USED FOR 3D PROJECTING

Directory of Open Access Journals (Sweden)

I. I. Rilskiy

2017-01-01

Full Text Available New, innovative methods of aerial surveys have changed the approaches to information provision of projecting dramatically for the last 15 years. Nowadays there are at least two methods that claim to be the most efficient way for collecting geospatial data intended for projecting – the airborne laser scanning (LIDAR data and photogrammetrically processed unmanned aerial vehicle (UAV-based aerial imagery, forming 3D point clouds. But these materials are not identical to each other neither in precision, nor in completeness.Airborne laser scanning (LIDAR is normally being performed using manned aircrafts. LIDAR data are very precise, they allow us to achieve data about relief even overgrown with vegetation, or to collect laser reflections from wires, metal constructions and poles. UAV surveys are normally being performed using frame digital cameras (lightweight, full-frame, or mid-size. These cameras form images that are being processed using 3D photogrammetric software in automatic mode that allows one to generate 3D point cloud, which is used for building digital elevation models, surfaces, orthomosaics, etc.All these materials are traditionally being used for making maps and GIS data. LIDAR data have been popular in design work. Also there have been some attempts to use for the same purpose 3D-point clouds, formed by photogrammetric software from images acquired from UAVs.After comparison of the datasets from these two different types of surveying (surveys were made simultaneously on the same territory, it became possible to define some specific, typical for LIDAR or imagery-based 3D data. It can be mentioned that imagery-based 3D data (3D point clouds, formed in automatic mode using photogrammetry, are much worse than LIDAR data – both in terms of precision and completeness.The article highlights these differences and makes attempts at explaining the origin of these differences. 

Clinical data miner: an electronic case report form system with integrated data preprocessing and machine-learning libraries supporting clinical diagnostic model research.

Science.gov (United States)

Installé, Arnaud Jf; Van den Bosch, Thierry; De Moor, Bart; Timmerman, Dirk

2014-10-20

Using machine-learning techniques, clinical diagnostic model research extracts diagnostic models from patient data. Traditionally, patient data are often collected using electronic Case Report Form (eCRF) systems, while mathematical software is used for analyzing these data using machine-learning techniques. Due to the lack of integration between eCRF systems and mathematical software, extracting diagnostic models is a complex, error-prone process. Moreover, due to the complexity of this process, it is usually only performed once, after a predetermined number of data points have been collected, without insight into the predictive performance of the resulting models. The objective of the study of Clinical Data Miner (CDM) software framework is to offer an eCRF system with integrated data preprocessing and machine-learning libraries, improving efficiency of the clinical diagnostic model research workflow, and to enable optimization of patient inclusion numbers through study performance monitoring. The CDM software framework was developed using a test-driven development (TDD) approach, to ensure high software quality. Architecturally, CDM's design is split over a number of modules, to ensure future extendability. The TDD approach has enabled us to deliver high software quality. CDM's eCRF Web interface is in active use by the studies of the International Endometrial Tumor Analysis consortium, with over 4000 enrolled patients, and more studies planned. Additionally, a derived user interface has been used in six separate interrater agreement studies. CDM's integrated data preprocessing and machine-learning libraries simplify some otherwise manual and error-prone steps in the clinical diagnostic model research workflow. Furthermore, CDM's libraries provide study coordinators with a method to monitor a study's predictive performance as patient inclusions increase. To our knowledge, CDM is the only eCRF system integrating data preprocessing and machine-learning libraries

FORM version 4.0

Science.gov (United States)

Kuipers, J.; Ueda, T.; Vermaseren, J. A. M.; Vollinga, J.

2013-05-01

We present version 4.0 of the symbolic manipulation system FORM. The most important new features are manipulation of rational polynomials and the factorization of expressions. Many other new functions and commands are also added; some of them are very general, while others are designed for building specific high level packages, such as one for Gröbner bases. New is also the checkpoint facility, that allows for periodic backups during long calculations. Finally, FORM 4.0 has become available as open source under the GNU General Public License version 3. Program summaryProgram title: FORM. Catalogue identifier: AEOT_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEOT_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: GNU General Public License, version 3 No. of lines in distributed program, including test data, etc.: 151599 No. of bytes in distributed program, including test data, etc.: 1 078 748 Distribution format: tar.gz Programming language: The FORM language. FORM itself is programmed in a mixture of C and C++. Computer: All. Operating system: UNIX, LINUX, Mac OS, Windows. Classification: 5. Nature of problem: FORM defines a symbolic manipulation language in which the emphasis lies on fast processing of very large formulas. It has been used successfully for many calculations in Quantum Field Theory and mathematics. In speed and size of formulas that can be handled it outperforms other systems typically by an order of magnitude. Special in this version: The version 4.0 contains many new features. Most important are factorization and rational arithmetic. The program has also become open source under the GPL. The code in CPC is for reference. You are encouraged to upload the most recent sources from www.nikhef.nl/form/formcvs.php because of frequent bug fixes. Solution method: See "Nature of Problem", above. Additional comments: NOTE: The code in CPC is for reference. You are encouraged

A Closed-Form Error Model of Straight Lines for Improved Data Association and Sensor Fusing

Directory of Open Access Journals (Sweden)

Volker Sommer

2018-04-01

Full Text Available Linear regression is a basic tool in mobile robotics, since it enables accurate estimation of straight lines from range-bearing scans or in digital images, which is a prerequisite for reliable data association and sensor fusing in the context of feature-based SLAM. This paper discusses, extends and compares existing algorithms for line fitting applicable also in the case of strong covariances between the coordinates at each single data point, which must not be neglected if range-bearing sensors are used. Besides, in particular, the determination of the covariance matrix is considered, which is required for stochastic modeling. The main contribution is a new error model of straight lines in closed form for calculating quickly and reliably the covariance matrix dependent on just a few comprehensible and easily-obtainable parameters. The model can be applied widely in any case when a line is fitted from a number of distinct points also without a priori knowledge of the specific measurement noise. By means of extensive simulations, the performance and robustness of the new model in comparison to existing approaches is shown.

NETWORK CODING BY BEAM FORMING

DEFF Research Database (Denmark)

2013-01-01

Network coding by beam forming in networks, for example, in single frequency networks, can provide aid in increasing spectral efficiency. When network coding by beam forming and user cooperation are combined, spectral efficiency gains may be achieved. According to certain embodiments, a method...... cooperating with the plurality of user equipment to decode the received data....

On-the-Job Ethics – Proximity Morality Forming in Medical School: A grounded theory analysis using survey data

Directory of Open Access Journals (Sweden)

Hans O. Thulesius, MD, Ph.D.

2009-03-01

Full Text Available On-the-job-ethics exist in all businesses and can also be called proximity morality forming. In this paper we propose that medical students take a proximity morality stance towards ethics education at medical school. This means that they want to form physician morality “on the job” instead of being taught ethics like any other subject. On-the-job-ethics for medical students involves learning ethics that is used when practicing ethics. Learning ethics includes comprehensive ethics courses in which quality lectures provide ethics grammar useful for the ethics practicing in attitude exercises and vignette reflections in tutored group discussions. On-the-job-ethics develops professional identity, handles diversity of religious and existential worldviews, trains students described as ethically naive, processes difficult clinical experiences, and desists negative role modeling from physicians in clinical or teaching situations. This grounded theory analysis was made from a questionnaire survey on attitudes to ethics education with 409 Swedish medical students participating. We analyzed over 8000 words of open-ended responses and multiplechoice questions using classic grounded theory procedures, but also compared questionnaire data using statistics such as multiple regression models. The paper gives an example of how grounded theory can be used with a limited amount of survey data.

Quality of data entry using single entry, double entry and automated forms processing--an example based on a study of patient-reported outcomes

DEFF Research Database (Denmark)

Paulsen, Aksel; Overgaard, Søren; Lauritsen, Jens Martin

2012-01-01

The clinical and scientific usage of patient-reported outcome measures is increasing in the health services. Often paper forms are used. Manual double entry of data is defined as the definitive gold standard for transferring data to an electronic format, but the process is laborious. Automated...

Emergency surgery data and documentation reporting forms for sudden-onset humanitarian crises, natural disasters and the existing burden of surgical disease.

Science.gov (United States)

Burkle, Frederick M; Nickerson, Jason W; von Schreeb, Johan; Redmond, Anthony D; McQueen, Kelly A; Norton, Ian; Roy, Nobhojit

2012-12-01

Following large-scale disasters and major complex emergencies, especially in resource-poor settings, emergency surgery is practiced by Foreign Medical Teams (FMTs) sent by governmental and non-governmental organizations (NGOs). These surgical experiences have not yielded an appropriate standardized collection of data and reporting to meet standards required by national authorities, the World Health Organization, and the Inter-Agency Standing Committee's Global Health Cluster. Utilizing the 2011 International Data Collection guidelines for surgery initiated by Médecins Sans Frontières, the authors of this paper developed an individual patient-centric form and an International Standard Reporting Template for Surgical Care to record data for victims of a disaster as well as the co-existing burden of surgical disease within the affected community. The data includes surgical patient outcomes and perioperative mortality, along with referrals for rehabilitation, mental health and psychosocial care. The purpose of the standard data format is fourfold: (1) to ensure that all surgical providers, especially from indigenous first responder teams and others performing emergency surgery, from national and international (Foreign) medical teams, contribute relevant and purposeful reporting; (2) to provide universally acceptable forms that meet the minimal needs of both national authorities and the Health Cluster; (3) to increase transparency and accountability, contributing to improved humanitarian coordination; and (4) to facilitate a comprehensive review of services provided to those affected by the crisis.

Spatial and kinematic structure of Monoceros star-forming region

Science.gov (United States)

Costado, M. T.; Alfaro, E. J.

2018-05-01

The principal aim of this work is to study the velocity field in the Monoceros star-forming region using the radial velocity data available in the literature, as well as astrometric data from the Gaia first release. This region is a large star-forming complex formed by two associations named Monoceros OB1 and OB2. We have collected radial velocity data for more than 400 stars in the area of 8 × 12 deg2 and distance for more than 200 objects. We apply a clustering analysis in the subspace of the phase space formed by angular coordinates and radial velocity or distance data using the Spectrum of Kinematic Grouping methodology. We found four and three spatial groupings in radial velocity and distance variables, respectively, corresponding to the Local arm, the central clusters forming the associations and the Perseus arm, respectively.

Reducing Approximation Error in the Fourier Flexible Functional Form

Directory of Open Access Journals (Sweden)

Tristan D. Skolrud

2017-12-01

Full Text Available The Fourier Flexible form provides a global approximation to an unknown data generating process. In terms of limiting function specification error, this form is preferable to functional forms based on second-order Taylor series expansions. The Fourier Flexible form is a truncated Fourier series expansion appended to a second-order expansion in logarithms. By replacing the logarithmic expansion with a Box-Cox transformation, we show that the Fourier Flexible form can reduce approximation error by 25% on average in the tails of the data distribution. The new functional form allows for nested testing of a larger set of commonly implemented functional forms.

Waste-form development

International Nuclear Information System (INIS)

Neilson, R.M. Jr.; Colombo, P.

1982-01-01

Contemporary solidification agents are being investigated relative to their applications to major fuel cycle and non-fuel cycle low-level waste (LLW) streams. Work is being conducted to determine the range of conditions under which these solidification agents can be applied to specific LLW streams. These studies are directed primarily towards defining operating parameters for both improved solidification of problem wastes and solidification of new LLW streams generated from advanced volume reduction technologies. Work is being conducted to measure relevant waste form properties. These data will be compiled and evaluated to demonstrate compliance with waste form performance and shallow land burial acceptance criteria and transportation requirements

NOAA Form 370 Database

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The data set contains information from submitted NOAA Form 370s, also known as the Fisheries Certificate of Origin, for imported shipments of frozen and/or processed...

Neutron charge radius and the neutron electric form factor

International Nuclear Information System (INIS)

Gentile, T. R.; Crawford, C. B.

2011-01-01

For nearly forty years, the Galster parametrization has been employed to fit existing data for the neutron electric form factor, G E n , vs the square of the four-momentum transfer, Q 2 . Typically this parametrization is constrained to be consistent with experimental data for the neutron charge radius. However, we find that the Galster form does not have sufficient freedom to accommodate reasonable values of the radius without constraining or compromising the fit. In addition, the G E n data are now at sufficient precision to motivate a two-parameter fit (or three parameters if we include thermal neutron data). Here we present a modified form of a two-dipole parametrization that allows this freedom and fits both G E n (including recent data at both low and high four-momentum transfer) and the charge radius well with simple, well-defined parameters. Analysis reveals that the Galster form is essentially a two-parameter approximation to the two-dipole form but becomes degenerate if we try to extend it naturally to three parameters.

In Situ Monitoring and Modeling of the Solution-Mediated Polymorphic Transformation of Rifampicin: From Form II to Form I.

Science.gov (United States)

Guo, Nannan; Hou, Baohong; Wang, Na; Xiao, Yan; Huang, Jingjing; Guo, Yanmei; Zong, Shuyi; Hao, Hongxun

2018-01-01

In this article, the solution-mediated polymorphic transformation of rifampicin was investigated and simulated in 3 solvents at 30°C. The solid-state form I and form II of rifampicin was characterized by powder X-ray diffraction, scanning electron microscopy, thermogravimetric analysis, Raman spectroscopy, and Fourier transform infrared spectroscopy (FTIR). To explore the relative stability, solubility data of form I and form II of rifampicin in butan-1-ol were determined using a dynamical method. In addition, Raman spectroscopy and focused beam reflectance measurement were used to in situ monitor the transformation of rifampicin from form II to form I. The liquid state concentration of rifampicin was measured by UV spectroscopic method. To investigate the effect of solvent on transformation, the transformation experiments were carried out in 3 solvents. Furthermore, a mathematical model was built to describe the kinetics of dissolution, nucleation, and growth processes during transformation by using experimental data. By combination of experimental and simulation results, it was found that the transformation process of rifampicin is controlled by dissolution of form II in heptane, whereas the transformation in hexane and octane was firstly controlled by dissolution of solid-state form and then controlled by growth of form I. Copyright © 2018 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

Child Support Enforcement Annual Data Report Form 157

Data.gov (United States)

U.S. Department of Health & Human Services — The Office of Child Support Enforcement's Annual Data Report from State agencies administering child support enforcement plans under Title IV-D of the Social...

VMS forms Output Tables

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — These output tables contain parsed and format validated data from the various VMS forms that are sent from any given vessel, while at sea, from the VMS devices on...

Baryon electromagnetic form factors at BESIII

Directory of Open Access Journals (Sweden)

Dbeyssi Alaa

2017-01-01

Full Text Available Electromagnetic form factors are fundamental quantities which parameterize the electric and magnetic structure of hadrons. This contribution reports on the measurements of baryon electromagnetic form factors at the BESIII experiment in Beijing. The Beijing e+e− collider BEPCII is a double-ring symmetric collider running at √s between 2.0 and 4.6 GeV. Baryon electromagnetic form factors can be measured at BESIII in direct e+e−-annihilation and in initial state radiation processes. Based on the data collected by the BESIII detector at 12 center of mass energies between 2.23 and 3.67 GeV, the e+e− → p̄p cross section and the time-like proton form factor is measured. Preliminary results from the analysis of the initial state radiation process e+e− → p̄pγ using a data set of 7.408 fb−1 collected at center-of-mass energies between 3.773 and 4.6 GeV, are also presented. The cross section for e+e−→Λ¯Λ${e^ + }{e^ - } \\to \\bar \\Lambda \\Lambda $ is measured based on 40.5 pb−1 data collected at 4 energy points from the threshold up to 3.08 GeV. Preliminary results on the total cross section and the Λ effective form factor are shown. Ongoing analysis based on the high luminosity energy scan from 2015 and from radiative return at different √s are also described.

Summary and evaluation of nuclear waste forms. Chapter 12

International Nuclear Information System (INIS)

Lutze, W.; Ewing, R.C.

1988-01-01

In this chapter data are compiled from the foregoing contributed chapters into tables. In a few cases additional more recent data not found in the chapters have been included in the tables. The following waste form data are summarized: physical properties, chemical durability, radiation effects and the status of processing techniques. In addition important aspects of the comparison of waste forms and the response of waste forms (glass and ceramic) to corrosion and radiation effects are discussed. (author). 119 refs.; 6 figs.; 5 tabs

Distilling free-form natural laws from experimental data.

Science.gov (United States)

Schmidt, Michael; Lipson, Hod

2009-04-03

For centuries, scientists have attempted to identify and document analytical laws that underlie physical phenomena in nature. Despite the prevalence of computing power, the process of finding natural laws and their corresponding equations has resisted automation. A key challenge to finding analytic relations automatically is defining algorithmically what makes a correlation in observed data important and insightful. We propose a principle for the identification of nontriviality. We demonstrated this approach by automatically searching motion-tracking data captured from various physical systems, ranging from simple harmonic oscillators to chaotic double-pendula. Without any prior knowledge about physics, kinematics, or geometry, the algorithm discovered Hamiltonians, Lagrangians, and other laws of geometric and momentum conservation. The discovery rate accelerated as laws found for simpler systems were used to bootstrap explanations for more complex systems, gradually uncovering the "alphabet" used to describe those systems.

Densified waste form and method for forming

Science.gov (United States)

Garino, Terry J.; Nenoff, Tina M.; Sava Gallis, Dorina Florentina

2015-08-25

Materials and methods of making densified waste forms for temperature sensitive waste material, such as nuclear waste, formed with low temperature processing using metallic powder that forms the matrix that encapsulates the temperature sensitive waste material. The densified waste form includes a temperature sensitive waste material in a physically densified matrix, the matrix is a compacted metallic powder. The method for forming the densified waste form includes mixing a metallic powder and a temperature sensitive waste material to form a waste form precursor. The waste form precursor is compacted with sufficient pressure to densify the waste precursor and encapsulate the temperature sensitive waste material in a physically densified matrix.

Waste form development

International Nuclear Information System (INIS)

Neilson, R.M. Jr.; Colombo, P.

1982-01-01

In this program, contemporary solidification agents are being investigated relative to their applications to major fuel cycle and non-fuel cycle low-level waste (LLW) streams. Work is being conducted to determine the range of conditions under which these solidification agents can be applied to specific LLW streams. These studies are directed primarily towards defining operating parameters for both improved solidification of problem wastes and solidification of new LLW streams generated from advanced volume reduction technologies. Work is being conducted to measure relevant waste form properties. These data will be compiled and evaluated to demonstrate compliance with waste form performance and shallow land burial acceptance criteria and transportation requirements (both as they exist and as they are modified with time). 6 tables

Dispersive analysis of the pion transition form factor

Science.gov (United States)

Hoferichter, M.; Kubis, B.; Leupold, S.; Niecknig, F.; Schneider, S. P.

2014-11-01

We analyze the pion transition form factor using dispersion theory. We calculate the singly-virtual form factor in the time-like region based on data for the cross section, generalizing previous studies on decays and scattering, and verify our result by comparing to data. We perform the analytic continuation to the space-like region, predicting the poorly-constrained space-like transition form factor below , and extract the slope of the form factor at vanishing momentum transfer . We derive the dispersive formalism necessary for the extension of these results to the doubly-virtual case, as required for the pion-pole contribution to hadronic light-by-light scattering in the anomalous magnetic moment of the muon.

A measurement of the space-like pion electromagnetic form factor

International Nuclear Information System (INIS)

Amendolia, S.R.; Badelek, B.; Batignani, G.; Bedeschi, F.; Bertolucci, E.; Bettoni, D.; Bosisio, L.; Bradaschia, C.; Dell'Orso, M.; Fidecaro, F.; Foa, L.; Focardi, E.; Giazotto, A.; Giorgi, M.A.; Marrocchesi, P.S.; Menzione, A.; Ristori, L.; Scribano, A.; Tonelli, G.; Triggiani, G.; Codino, A.; Enorini, M.; Fabbri, F.L.; Laurelli, P.; Satta, L.; Spillantini, P.; Zallo, A.

1986-01-01

The pion form factor has been measured in the space-like q 2 region 0.014 to 0.26 (GeV/c) 2 by scattering 300 GeV pions from the electrons of a liquid hydrogen target. A detailed description is given of the apparatus, data analysis and corrections to the data. The mean square charge radius extracted from the data is model-dependent. We find that a form which includes a realistic description of the form factor phase gives a similar result to the naive pole form, and conclude π 2 >=0.439±0.008 fm 2 . (orig.)

Data Virtualization for Business Intelligence Systems Revolutionizing Data Integration for Data Warehouses

CERN Document Server

van der Lans, Rick

2012-01-01

Data virtualization can help you accomplish your goals with more flexibility and agility. Learn what it is and how and why it should be used with Data Virtualization for Business Intelligence Systems. In this book, expert author Rick van der Lans explains how data virtualization servers work, what techniques to use to optimize access to various data sources and how these products can be applied in different projects. You'll learn the difference is between this new form of data integration and older forms, such as ETL and replication, and gain a clear understanding of how data virtualization r

Theory of Single Point Incremental Forming

DEFF Research Database (Denmark)

Martins, P.A.F.; Bay, Niels; Skjødt, Martin

2008-01-01

This paper presents a closed-form theoretical analysis modelling the fundamentals of single point incremental forming and explaining the experimental and numerical results available in the literature for the past couple of years. The model is based on membrane analysis with bi-directional in-plan......-plane contact friction and is focused on the extreme modes of deformation that are likely to be found in single point incremental forming processes. The overall investigation is supported by experimental work performed by the authors and data retrieved from the literature.......This paper presents a closed-form theoretical analysis modelling the fundamentals of single point incremental forming and explaining the experimental and numerical results available in the literature for the past couple of years. The model is based on membrane analysis with bi-directional in...

Harmonic Maass forms and mock modular forms

CERN Document Server

Bringmann, Kathrin; Ono, Ken

2017-01-01

Modular forms and Jacobi forms play a central role in many areas of mathematics. Over the last 10-15 years, this theory has been extended to certain non-holomorphic functions, the so-called "harmonic Maass forms". The first glimpses of this theory appeared in Ramanujan's enigmatic last letter to G. H. Hardy written from his deathbed. Ramanujan discovered functions he called "mock theta functions" which over eighty years later were recognized as pieces of harmonic Maass forms. This book contains the essential features of the theory of harmonic Maass forms and mock modular forms, together with a wide variety of applications to algebraic number theory, combinatorics, elliptic curves, mathematical physics, quantum modular forms, and representation theory.

IMMUNOASSAYS FOR THE DETECTION OF UROKINASE RECEPTOR FORMS

DEFF Research Database (Denmark)

2004-01-01

amounts of uPAR forms in a sample with data indicative of the presence of the cancer disease. The method can be used for staging, prognosis or diagnosis of prostate cancer. Two novel monoclonal antibodies and a kit and immunoassays for detecting at least one uPAR form(s) are also described in the present...

A Comparative Study of Financial Data Sources for Critical Access Hospitals: Audited Financial Statements, the Medicare Cost Report, and the Internal Revenue Service Form 990

Science.gov (United States)

Ozmeral, Alisha Bhadelia; Reiter, Kristin L.; Holmes, George M.; Pink, George H.

2012-01-01

Purpose: Medicare Cost Reports (MCR), Internal Revenue Service Form 990s (IRS 990), and Audited Financial Statements (AFS) vary in their content, detail, purpose, timeliness, and certification. The purpose of this study was to compare selected financial data elements and characterize the extent of differences in financial data and ratios across…

Clinical and electroencephalographic characteristics of some forms of epileptic encephalopathies in infants: The data of the authors' follow-up observations

Directory of Open Access Journals (Sweden)

I. D. Lemeshko

2016-01-01

Full Text Available Objective: to study clinical symptoms and brain activity in new forms of infantile epilepsy, such as malignant migrating partial seizures in infancy (MMPSI and Markand-Blume-Ohtahara syndrome (MBOS and to elaborate their differential diagnostic criteria for the timely choice of treatment policy and for the prediction of the disease.Patients and methods. Thirty-eight children aged 1.5 months to 3 years with MMPSI and MBOS were examined. Their medical history and neurological examination data, electroencephalographic and neuroimaging characteristics, and the efficiency of chosen anticonvulsant therapy were investigated.Results and discussion. The investigators revealed the following characteristics of these forms: the causes of these syndromes were highly diverse and unspecific; the neurological status was characterized by a variety of symptoms with an obvious delay in psycho-prespeech development concurrent with a high rate of partial focal (in MMPSI and generalized (in MBOS status epilepticus; The EEC characteristic sign was MISF and«lafa» patterns in the children with MBOS and continuous migrating partial ictal status epilepticus patterns in those with MMPSI. These forms of epileptic encephalopathies are extremely drug-resistant and characterized by a high risk for a fatal outcome.

Anomaly, mixing and transition form factors of pseudoscalar mesons

International Nuclear Information System (INIS)

Klopot, Yaroslav; Oganesian, Armen; Teryaev, Oleg

2011-01-01

We derive the exact non-perturbative QCD sum rule for the transition form factors of η and η ′ using the dispersive representation of axial anomaly. This sum rule allows to express the transition form factors entirely in terms of meson decay constants. Using this sum rule several mixing schemes were analyzed and compared to recent experimental data. A good agreement with experimental data on η,η ′ transition form factors in the range from real to highly virtual photons was obtained.

Utilizing Nested Normal Form to Design Redundancy Free JSON Schemas

Directory of Open Access Journals (Sweden)

Wai Yin Mok

2016-12-01

Full Text Available JSON (JavaScript Object Notation is a lightweight data-interchange format for the Internet. JSON is built on two structures: (1 a collection of name/value pairs and (2 an ordered list of values (http://www.json.org/. Because of this simple approach, JSON is easy to use and it has the potential to be the data interchange format of choice for the Internet. Similar to XML, JSON schemas allow nested structures to model hierarchical data. As data interchange over the Internet increases exponentially due to cloud computing or otherwise, redundancy free JSON data are an attractive form of communication because they improve the quality of data communication through eliminating update anomaly. Nested Normal Form, a normal form for hierarchical data, is a precise characterization of redundancy. A nested table, or a hierarchical schema, is in Nested Normal Form if and only if it is free of redundancy caused by multivalued and functional dependencies. Using Nested Normal Form as a guide, this paper introduces a JSON schema design methodology that begins with UML use case diagrams, communication diagrams and class diagrams that model a system under study. Based on the use cases’ execution frequencies and the data passed between involved parties in the communication diagrams, the proposed methodology selects classes from the class diagrams to be the roots of JSON scheme trees and repeatedly adds classes from the class diagram to the scheme trees as long as the schemas satisfy Nested Normal Form. This process continues until all of the classes in the class diagram have been added to some JSON scheme trees.

Silicon nitride-fabrication, forming and properties

International Nuclear Information System (INIS)

Yehezkel, O.

1983-01-01

This article, which is a literature survey of the recent years, includes description of several methods for the formation of silicone nitride, and five methods of forming: Reaction-bonded silicon nitride, sintering, hot pressing, hot isostatic pressing and chemical vapour deposition. Herein are also included data about mechanical and physical properties of silicon nitride and the relationship between the forming method and the properties. (author)

Symbolic regression via genetic programming for data driven derivation of confinement scaling laws without any assumption on their mathematical form

International Nuclear Information System (INIS)

Murari, A; Peluso, E; Gelfusa, M; Lupelli, I; Lungaroni, M; Gaudio, P

2015-01-01

Many measurements are required to control thermonuclear plasmas and to fully exploit them scientifically. In the last years JET has shown the potential to generate about 50 GB of data per shot. These amounts of data require more sophisticated data analysis methodologies to perform correct inference and various techniques have been recently developed in this respect. The present paper covers a new methodology to extract mathematical models directly from the data without any a priori assumption about their expression. The approach, based on symbolic regression via genetic programming, is exemplified using the data of the International Tokamak Physics Activity database for the energy confinement time. The best obtained scaling laws are not in power law form and suggest a revisiting of the extrapolation to ITER. Indeed the best non-power law scalings predict confinement times in ITER approximately between 2 and 3 s. On the other hand, more comprehensive and better databases are required to fully profit from the power of these new methods and to discriminate between the hundreds of thousands of models that they can generate. (paper)

Functional form diagnostics for Cox's proportional hazards model.

Science.gov (United States)

León, Larry F; Tsai, Chih-Ling

2004-03-01

We propose a new type of residual and an easily computed functional form test for the Cox proportional hazards model. The proposed test is a modification of the omnibus test for testing the overall fit of a parametric regression model, developed by Stute, González Manteiga, and Presedo Quindimil (1998, Journal of the American Statistical Association93, 141-149), and is based on what we call censoring consistent residuals. In addition, we develop residual plots that can be used to identify the correct functional forms of covariates. We compare our test with the functional form test of Lin, Wei, and Ying (1993, Biometrika80, 557-572) in a simulation study. The practical application of the proposed residuals and functional form test is illustrated using both a simulated data set and a real data set.

Anomaly, mixing and transition form factors of pseudoscalar mesons

Energy Technology Data Exchange (ETDEWEB)

Klopot, Yaroslav, E-mail: klopot@theor.jinr.ru [Bogoliubov Laboratory of Theoretical Physics, Joint Institute for Nuclear Research, Joliot-Curie 6, Dubna 141980 (Russian Federation); Oganesian, Armen, E-mail: armen@itep.ru [Bogoliubov Laboratory of Theoretical Physics, Joint Institute for Nuclear Research, Joliot-Curie 6, Dubna 141980 (Russian Federation); Institute of Theoretical and Experimental Physics, B. Cheremushkinskaya 25, Moscow 117218 (Russian Federation); Teryaev, Oleg, E-mail: teryaev@theor.jinr.ru [Bogoliubov Laboratory of Theoretical Physics, Joint Institute for Nuclear Research, Joliot-Curie 6, Dubna 141980 (Russian Federation)

2011-10-15

We derive the exact non-perturbative QCD sum rule for the transition form factors of {eta} and {eta}{sup Prime} using the dispersive representation of axial anomaly. This sum rule allows to express the transition form factors entirely in terms of meson decay constants. Using this sum rule several mixing schemes were analyzed and compared to recent experimental data. A good agreement with experimental data on {eta},{eta}{sup Prime} transition form factors in the range from real to highly virtual photons was obtained.

Strangeness Vector and Axial-Vector Form Factors of the Nucleon

Directory of Open Access Journals (Sweden)

Pate Stephen

2014-03-01

Full Text Available A revised global fit of electroweak ep and vp elastic scattering data has been performed, with the goal of determining the strange quark contribution to the vector and axial-vector form factors of the nucleon in the momentum-transfer range 0 < Q2 < 1 GeV2. The two vector (electric and magnetic form factors GsE(Q2 and GsM(Q2 are strongly constrained by ep elastic scattering data, while the major source of information on the axial-vector form factor GsA(Q2 is vp scattering data. Combining the two kinds of data into a single global fit makes possible additional precision in the determination of these form factors, and provides a unique way to determine the strange quark contribution to the nucleon spin, ΔS , independently of leptonic deep-inelastic scattering. The fit makes use of data from the BNL-E734, SAMPLE, HAPPEx, G0, and PVA4 experiments; we will also compare the result of the fit with recent data from MiniBooNE, and anticipate how this fit can be improved when new data from MicroBooNE become available.

Chemical forms of radioiodine

International Nuclear Information System (INIS)

Tachikawa, Enzo

1979-01-01

Release of radioiodine built-up during reactor operations presents a potential problem from the standpoint of environmental safety. Among the chemical forms of radioiodine, depending upon the circumstances, organic iodides cast a most serious problem because of its difficulties in the trapping and because of its stability compared to other chemical forms. Furthermore, pellet-cladding interaction (PCl) fuel failures in LWR fuel rods are believed to be stress corrosion cracks caused by embrittling fission product species, radioiodine. To deal with these problems, knowledge is required on the chemical behaviors of radioiodine in and out of fuels, as well as the release behaviors from fuels. Here a brief review is given of these respects, in aiming at clearing-up the questions still remaining unknown. The data seem to indicate that radioiodine exists as a combined form in fuels. upon heating slightly irradiated fuels, the iodine atoms are released in a chemical form associated with uranium atoms. Experiments, however, as needed with specimen of higher burnup, where the interactions of radioiodine with metallic fission products could be favored. The dominant release mechanism of radioiodine under normal operating temperatures will be diffusion to grain boundaries leading to open surfaces. Radiation-induced internal traps, however, after the rate of diffusion significantly. The carbon sources of organic iodides formed under various conditions and its formation mechanisms have also been considered. (author)

78 FR 45464 - Broadband Data Improvement Act; Eligible Entities Aggregate Form 477 Data

Science.gov (United States)

2013-07-29

...) containing an express commitment to protect the data in this fashion. 33. Procedures for Obtaining Access to... employees of the eligible entity; (2) outside contractors, subcontractors, consultants or experts retained for the purpose of assisting eligible entities, provided that such outside consultants are not...

Past-Tense Generation from Form versus Meaning: Behavioural Data and Simulation Evidence

Science.gov (United States)

Woollams, Anna M.; Joanisse, Marc; Patterson, Karalyn

2009-01-01

The standard task used to study inflectional processing of verbs involves presentation of the stem form from which the participant is asked to generate the past tense. This task reveals a processing disadvantage for irregular relative to regular English verbs, more pronounced for lower-frequency items. Dual- and single-mechanism theories of…

Results of field testing of radioactive waste forms using lysimeters

International Nuclear Information System (INIS)

McConnell, J.W., Jr.; Rogers, R.D.; Jastrow, J.D.; Wickliff, D.S.

1992-01-01

The Field Lysimeter Investigation: Low-Level Waste Data Base Development Program is obtaining informaiton on the performance of radioactive waste in a disposal environment. Waste forms fabricated using ion-exchange resins from EPICOR-II prefilters employed in the cleanup of the Three Mile Island (TMI) Nuclear Power Station are being tested to develop a low-level waste data base and to obtain information on survivability of waste forms in a disposal environment. In this paper, radionuclide releases from waste forms in the first six years of sampling are presented and discussed. Application of lysimeter data to use in performance assessment models is presented. Initial results from use of data in a performance assessment model are discussed

Extending the accuracy of the SNAP interatomic potential form

Science.gov (United States)

Wood, Mitchell A.; Thompson, Aidan P.

2018-06-01

The Spectral Neighbor Analysis Potential (SNAP) is a classical interatomic potential that expresses the energy of each atom as a linear function of selected bispectrum components of the neighbor atoms. An extension of the SNAP form is proposed that includes quadratic terms in the bispectrum components. The extension is shown to provide a large increase in accuracy relative to the linear form, while incurring only a modest increase in computational cost. The mathematical structure of the quadratic SNAP form is similar to the embedded atom method (EAM), with the SNAP bispectrum components serving as counterparts to the two-body density functions in EAM. The effectiveness of the new form is demonstrated using an extensive set of training data for tantalum structures. Similar to artificial neural network potentials, the quadratic SNAP form requires substantially more training data in order to prevent overfitting. The quality of this new potential form is measured through a robust cross-validation analysis.

Nucleon Electromagnetic Form Factors

Energy Technology Data Exchange (ETDEWEB)

Marc Vanderhaeghen; Charles Perdrisat; Vina Punjabi

2007-10-01

There has been much activity in the measurement of the elastic electromagnetic proton and neutron form factors in the last decade, and the quality of the data has greatly improved by performing double polarization experiments, in comparison with previous unpolarized data. Here we review the experimental data base in view of the new results for the proton, and neutron, obtained at JLab, MAMI, and MIT-Bates. The rapid evolution of phenomenological models triggered by these high-precision experiments will be discussed, including the recent progress in the determination of the valence quark generalized parton distributions of the nucleon, as well as the steady rate of improvements made in the lattice QCD calculations.

Acemetacin cocrystals and salts: structure solution from powder X-ray data and form selection of the piperazine salt

Directory of Open Access Journals (Sweden)

Palash Sanphui

2014-03-01

Full Text Available Acemetacin (ACM is a non-steroidal anti-inflammatory drug (NSAID, which causes reduced gastric damage compared with indomethacin. However, acemetacin has a tendency to form a less soluble hydrate in the aqueous medium. We noted difficulties in the preparation of cocrystals and salts of acemetacin by mechanochemical methods, because this drug tends to form a hydrate during any kind of solution-based processing. With the objective to discover a solid form of acemetacin that is stable in the aqueous medium, binary adducts were prepared by the melt method to avoid hydration. The coformers/salt formers reported are pyridine carboxamides [nicotinamide (NAM, isonicotinamide (INA, and picolinamide (PAM], caprolactam (CPR, p-aminobenzoic acid (PABA, and piperazine (PPZ. The structures of an ACM–INA cocrystal and a binary adduct ACM–PABA were solved using single-crystal X-ray diffraction. Other ACM cocrystals, ACM–PAM and ACM–CPR, and the piperazine salt ACM–PPZ were solved from high-resolution powder X-ray diffraction data. The ACM–INA cocrystal is sustained by the acid...pyridine heterosynthon and N—H...O catemer hydrogen bonds involving the amide group. The acid...amide heterosynthon is present in the ACM–PAM cocrystal, while ACM–CPR contains carboxamide dimers of caprolactam along with acid–carbonyl (ACM hydrogen bonds. The cocrystals ACM–INA, ACM–PAM and ACM–CPR are three-dimensional isostructural. The carboxyl...carboxyl synthon in ACM–PABA posed difficulty in assigning the position of the H atom, which may indicate proton disorder. In terms of stability, the salts were found to be relatively stable in pH 7 buffer medium over 24 h, but the cocrystals dissociated to give ACM hydrate during the same time period. The ACM–PPZ salt and ACM–nicotinamide cocrystal dissolve five times faster than the stable hydrate form, whereas the ACM–PABA adduct has 2.5 times faster dissolution rate. The pharmaceutically acceptable

Acemetacin cocrystals and salts: structure solution from powder X-ray data and form selection of the piperazine salt.

Science.gov (United States)

Sanphui, Palash; Bolla, Geetha; Nangia, Ashwini; Chernyshev, Vladimir

2014-03-01

Acemetacin (ACM) is a non-steroidal anti-inflammatory drug (NSAID), which causes reduced gastric damage compared with indomethacin. However, acemetacin has a tendency to form a less soluble hydrate in the aqueous medium. We noted difficulties in the preparation of cocrystals and salts of acemetacin by mechanochemical methods, because this drug tends to form a hydrate during any kind of solution-based processing. With the objective to discover a solid form of acemetacin that is stable in the aqueous medium, binary adducts were prepared by the melt method to avoid hydration. The coformers/salt formers reported are pyridine carboxamides [nicotinamide (NAM), isonicotinamide (INA), and picolinamide (PAM)], caprolactam (CPR), p-aminobenzoic acid (PABA), and piperazine (PPZ). The structures of an ACM-INA cocrystal and a binary adduct ACM-PABA were solved using single-crystal X-ray diffraction. Other ACM cocrystals, ACM-PAM and ACM-CPR, and the piperazine salt ACM-PPZ were solved from high-resolution powder X-ray diffraction data. The ACM-INA cocrystal is sustained by the acid⋯pyridine heterosynthon and N-H⋯O catemer hydrogen bonds involving the amide group. The acid⋯amide heterosynthon is present in the ACM-PAM cocrystal, while ACM-CPR contains carboxamide dimers of caprolactam along with acid-carbonyl (ACM) hydrogen bonds. The cocrystals ACM-INA, ACM-PAM and ACM-CPR are three-dimensional isostructural. The carboxyl⋯carboxyl synthon in ACM-PABA posed difficulty in assigning the position of the H atom, which may indicate proton disorder. In terms of stability, the salts were found to be relatively stable in pH 7 buffer medium over 24 h, but the cocrystals dissociated to give ACM hydrate during the same time period. The ACM-PPZ salt and ACM-nicotinamide cocrystal dissolve five times faster than the stable hydrate form, whereas the ACM-PABA adduct has 2.5 times faster dissolution rate. The pharmaceutically acceptable piperazine salt of acemetacin exhibits superior

Formulation of Forming Load in V-Bending

Directory of Open Access Journals (Sweden)

Koumura Yuki

2016-01-01

Full Text Available A novel method is described to calculate the forming load in V-bending by a press brake. The data of forming load are collected by FEM analysis. With an increase of the punch stroke in V-bending, the forming load increases gradually after the elastic limit, and then decreases after showing the maximum value. The proposal formulation to trace the variations in the forming load curve includes the calculating method of the load of the elastic limit, the maximum load in air bending and the variations of the forming load before/after the bending stroke of the maximum load. The calculated precision is confirmed by comparing with the measured load-stroke curves in V-bending with a press brake.

Radionuclide Retention in Concrete Waste Forms

Energy Technology Data Exchange (ETDEWEB)

Mattigod, Shas V.; Bovaird, Chase C.; Wellman, Dawn M.; Wood, Marcus I.

2010-09-30

Assessing long-term performance of Category 3 waste cement grouts for radionuclide encasement requires knowledge of the radionuclide-cement interactions and mechanisms of retention (i.e., sorption or precipitation); the mechanism of contaminant release; the significance of contaminant release pathways; how waste form performance is affected by the full range of environmental conditions within the disposal facility; the process of waste form aging under conditions that are representative of processes occurring in response to changing environmental conditions within the disposal facility; the effect of waste form aging on chemical, physical, and radiological properties; and the associated impact on contaminant release. This knowledge will enable accurate prediction of radionuclide fate when the waste forms come in contact with groundwater. The information presented in the report provides data that 1) quantify radionuclide retention within concrete waste form materials similar to those used to encapsulate waste in the Low-Level Waste Burial Grounds (LLBG); 2) measure the effect of concrete waste form properties likely to influence radionuclide migration; and 3) quantify the stability of uranium-bearing solid phases of limited solubility in concrete.

Case Report Form for oral health assessments: methodological considerations

Directory of Open Access Journals (Sweden)

Joana Christina Carvalho

2012-01-01

Full Text Available Information on the oral health condition of the target population is required to enable the development of policy strategies for oral health promotion. This information needs to be substantiated by reliable data obtained through regular oral health assessments. Countries around the world have set up oral health data-registration systems that monitor the oral health of the population. These systems are either integrated in the public oral health care service or in national surveys conducted on a regular basis. This paper describes the conception and development of a Case Report Form for oral health assessments and introduces a recently developed electronic data-registration system for data capture in oral health surveys. The conception and development of a Case Report Form poses a number of challenges to be overcome. In addition to ensuring the scientific quality of its contents, several requirements need to be met. In the framework of national oral health surveys, handwritten data capture has proven accurate, but entails an important workload related to the printing and transporting of the forms, data transfer and storage of the forms, as well as the time required to perform these tasks. On the other hand, electronic data capture enables time saving and better performance. However, the advantages of this system may not be fully acknowledged by general practitioners, and their motivation to employ information and communication technologies may need to be encouraged. In the long term, the inclusion of electronic data registration in university training is probably the best strategy to achieve this.

Use of colour for hand-filled form analysis and recognition

OpenAIRE

Sherkat, N; Allen, T; Wong, WS

2005-01-01

Colour information in form analysis is currently under utilised. As technology has advanced and computing costs have reduced, the processing of forms in colour has now become practicable. This paper describes a novel colour-based approach to the extraction of filled data from colour form images. Images are first quantised to reduce the colour complexity and data is extracted by examining the colour characteristics of the images. The improved performance of the proposed method has been verifie...

Analysis of nucleon form factor data reveals the e+e-→nucleon-antinucleon cross section to be remarkably larger than the e+e-→proton-antiproton one

International Nuclear Information System (INIS)

Dubricka, S.

1987-01-01

A modified six-resonance VMD model for a description of the nucleon electromagnetic structure is constructed. It possesses correct analytic properties and the asymptotic behaviour in accordance with a quark model prediction for baryons. Only parameters with clear physical meaning are contained in the model. They are evaluated numerically in a simultaneous fit of all existing data on electric and magnetic nucleon form factors. As a result, the behaviour in the time-like region of electric and magnetic neutron form factors, for which there are no data up to now, has been predicted. In comparison with the corresponding behaviour of proton form factors above the nucleon-antinucleon threshold one finds them to exceed by a factor of five. Consequently the cross section of e + e - →nucleon-antinucleon is expected to be roughly twenty-five-times as large as the cross section of e + e - →proton-antiproton

29 CFR 1960.69 - Retention and updating of old forms.

Science.gov (United States)

2010-07-01

... in effect prior to January 1, 2005 for five years following the year to which they relate and continue to provide access to the data as though these forms were the OSHA Form 300 Log and Form 301...

Dispersive analysis of the pion transition form factor

Energy Technology Data Exchange (ETDEWEB)

Hoferichter, M. [Technische Universitaet Darmstadt, Institut fuer Kernphysik, Darmstadt (Germany); GSI Helmholtzzentrum fuer Schwerionenforschung GmbH, ExtreMe Matter Institute EMMI, Darmstadt (Germany); University of Bern, Albert Einstein Center for Fundamental Physics, Institute for Theoretical Physics, Bern (Switzerland); Kubis, B.; Niecknig, F.; Schneider, S.P. [Universitaet Bonn, Helmholtz-Institut fuer Strahlen- und Kernphysik (Theorie) and Bethe Center for Theoretical Physics, Bonn (Germany); Leupold, S. [Uppsala Universitet, Institutionen foer fysik och astronomi, Box 516, Uppsala (Sweden)

2014-11-15

We analyze the pion transition form factor using dispersion theory. We calculate the singly-virtual form factor in the time-like region based on data for the e{sup +}e{sup -} → 3π cross section, generalizing previous studies on ω, φ → 3π decays and γπ → ππ scattering, and verify our result by comparing to e{sup +}e{sup -} → π{sup 0}γ data. We perform the analytic continuation to the space-like region, predicting the poorlyconstrained space-like transition form factor below 1 GeV, and extract the slope of the form factor at vanishing momentum transfer a{sub π} = (30.7 ± 0.6) x 10{sup -3}. We derive the dispersive formalism necessary for the extension of these results to the doubly-virtual case, as required for the pion-pole contribution to hadronic light-by-light scattering in the anomalous magnetic moment of the muon. (orig.)

Access 2007 forms and reports for dummies

CERN Document Server

Underdahl, Brian

2013-01-01

Do you have tons and tons of data on your computer but you're not quite sure how to make heads or tails of them-or even organize them? Are you using Access as spreadsheet rather than what it was really meant for? If you have trouble finding meaning in your data, then Access 2007 Forms & Reports for Dummies let you discover the wonders of this highly useful program. This no-nonsense guide gets right down to business by showing you the easy way to use this powerful tool. It gets you started with selective, targeted queries; forms that improve efficiency; and reports that communicate-while sparin

Perturbative QCD and electromagnetic form factors

International Nuclear Information System (INIS)

Carlson, C.E.; Gross, F.

1987-01-01

We calculate nucleon magnetic form factors using perturbative QCD for several distribution amplitudes including a general one given in terms of Appell polynomials. We find that the magnitude and sign of both nucleon magnetic form factors can be explained within perturbative QCD. The observed normalization of G/sub Mp/ requires that the distribution amplitude be broader than its superhigh momentum transfer limit, and the G/sub Mn//G/sub Mp/ data may require the distribution amplitude to be asymmetric, in accord with distribution amplitudes derived from QCD sum rules. Some speculation as to how an asymmetric distribution amplitude can come about is offered. Finally, we show that the soft contributions corresponding to the particular distribution amplitudes we use need not be bigger than the data. 16 refs., 6 figs

X-ray diffraction study of choline chloride's β form

International Nuclear Information System (INIS)

Petrouleas, V.; Lemmon, R.M.; Christensen, A.

1978-01-01

The organic salt choline chloride exists in two crystalline polymorphs. One (the α form) is extraordinarily sensitive to ionizing radiation, the other (the β form) is not. The present report describes an x-ray diffraction study of the β form. The structure has been found to be highly disordered face centered cubic. A reasonable least-square refinement of the intensity data has been achieved in the centrosymmetric space group Fm3 or Fm3m by use of a molecular model with restrained bond lengths. The results show that in the β form the electronic density due to the choline cation is closely spaced around the N, so that hydrogen bonding to the chloride is unlikely. Comparison with infrared and NMR data indicates that the disordering is dynamic and can be ascribed to rotations of the choline ion around crystallographic symmetry axes. Possible connections of these results with the radiation stability of the β form are discussed

Alternative Forms of the Rey Auditory Verbal Learning Test: A Review

Directory of Open Access Journals (Sweden)

Keith A. Hawkins

2004-01-01

Full Text Available Practice effects in memory testing complicate the interpretation of score changes over repeated testings, particularly in clinical applications. Consequently, several alternative forms of the Auditory Verbal Learning Test (AVLT have been developed. Studies of these typically indicate that the forms examined are equivalent. However, the implication that the forms in the literature are interchangeable must be tempered by several caveats. Few studies of equivalence have been undertaken; most are restricted to the comparison of single pairs of forms, and the pairings vary across studies. These limitations are exacerbated by the minimal overlapping across studies in variables reported, or in the analyses of equivalence undertaken. The data generated by these studies are nonetheless valuable, as significant practice effects result from serial use of the same form. The available data on alternative AVLT forms are summarized, and recommendations regarding form development and the determination of form equivalence are offered.

Fuzzy logic of Aristotelian forms

Energy Technology Data Exchange (ETDEWEB)

Perlovsky, L.I. [Nichols Research Corp., Lexington, MA (United States)

1996-12-31

Model-based approaches to pattern recognition and machine vision have been proposed to overcome the exorbitant training requirements of earlier computational paradigms. However, uncertainties in data were found to lead to a combinatorial explosion of the computational complexity. This issue is related here to the roles of a priori knowledge vs. adaptive learning. What is the a-priori knowledge representation that supports learning? I introduce Modeling Field Theory (MFT), a model-based neural network whose adaptive learning is based on a priori models. These models combine deterministic, fuzzy, and statistical aspects to account for a priori knowledge, its fuzzy nature, and data uncertainties. In the process of learning, a priori fuzzy concepts converge to crisp or probabilistic concepts. The MFT is a convergent dynamical system of only linear computational complexity. Fuzzy logic turns out to be essential for reducing the combinatorial complexity to linear one. I will discuss the relationship of the new computational paradigm to two theories due to Aristotle: theory of Forms and logic. While theory of Forms argued that the mind cannot be based on ready-made a priori concepts, Aristotelian logic operated with just such concepts. I discuss an interpretation of MFT suggesting that its fuzzy logic, combining a-priority and adaptivity, implements Aristotelian theory of Forms (theory of mind). Thus, 2300 years after Aristotle, a logic is developed suitable for his theory of mind.

Spaceborne potential for examining taiga-tundra ecotone form and vulnerability

Science.gov (United States)

Montesano, Paul M.; Sun, Guoqing; Dubayah, Ralph O.; Ranson, K. Jon

2016-07-01

In the taiga-tundra ecotone (TTE), site-dependent forest structure characteristics can influence the subtle and heterogeneous structural changes that occur across the broad circumpolar extent. Such changes may be related to ecotone form, described by the horizontal and vertical patterns of forest structure (e.g., tree cover, density, and height) within TTE forest patches, driven by local site conditions, and linked to ecotone dynamics. The unique circumstance of subtle, variable, and widespread vegetation change warrants the application of spaceborne data including high-resolution (ecotone form. We demonstrate the potential of spaceborne data for integrating forest height and density to assess TTE form at the scale of forest patches across the circumpolar biome by (1) mapping forest patches in study sites along the TTE in northern Siberia with a multi-resolution suite of spaceborne data and (2) examining the uncertainty of forest patch height from this suite of data across sites of primarily diffuse TTE forms. Results demonstrate the opportunities for improving patch-scale spaceborne estimates of forest height, the vertical component of TTE form, with HRSI. The distribution of relative maximum height uncertainty based on prediction intervals is centered at ˜ 40 %, constraining the use of height for discerning differences in forest patches. We discuss this uncertainty in light of a conceptual model of general ecotone forms and highlight how the uncertainty of spaceborne estimates of height can contribute to the uncertainty in identifying TTE forms. A focus on reducing the uncertainty of height estimates in forest patches may improve depiction of TTE form, which may help explain variable forest responses in the TTE to climate change and the vulnerability of portions of the TTE to forest structure change.

Mapping rock forming minerals at Boundary Canyon, Death Valey National Park, California, using aerial SEBASS thermal infrared hyperspectral image data

Science.gov (United States)

Aslett, Zan; Taranik, James V.; Riley, Dean N.

2018-02-01

Aerial spatially enhanced broadband array spectrograph system (SEBASS) long-wave infrared (LWIR) hyperspectral image data were used to map the distribution of rock-forming minerals indicative of sedimentary and meta-sedimentary lithologies around Boundary Canyon, Death Valley, California, USA. Collection of data over the Boundary Canyon detachment fault (BCDF) facilitated measurement of numerous lithologies representing a contact between the relatively unmetamorphosed Grapevine Mountains allochthon and the metamorphosed core complex of the Funeral Mountains autochthon. These included quartz-rich sandstone, quartzite, conglomerate, and alluvium; muscovite-rich schist, siltstone, and slate; and carbonate-rich dolomite, limestone, and marble, ranging in age from late Precambrian to Quaternary. Hyperspectral data were reduced in dimensionality and processed to statistically identify and map unique emissivity spectra endmembers. Some minerals (e.g., quartz and muscovite) dominate multiple lithologies, resulting in a limited ability to differentiate them. Abrupt variations in image data emissivity amongst pelitic schists corresponded to amphibolite; these rocks represent gradation from greenschist- to amphibolite-metamorphic facies lithologies. Although the full potential of LWIR hyperspectral image data may not be fully utilized within this study area due to lack of measurable spectral distinction between rocks of similar bulk mineralogy, the high spectral resolution of the image data was useful in characterizing silicate- and carbonate-based sedimentary and meta-sedimentary rocks in proximity to fault contacts, as well as for interpreting some mineral mixtures.

Hadronic form factors in kaon photoproduction

Energy Technology Data Exchange (ETDEWEB)

Syukurilla, L., E-mail: tmart@fisika.ui.ac.id; Mart, T., E-mail: tmart@fisika.ui.ac.id [Department Fisika, FMIPA, Universitas Indonesia, Depok, 164242 (Indonesia)

2014-09-25

We have revisited the effect of hadronic form factors in kaon photoproduction process by utilizing an isobaric model developed for kaon photoproduction off the proton. The model is able to reproduce the available experimental data nicely as well as to reveal the origin of the second peak in the total cross section, which was the main source of confusion for decades. Different from our previous study, in the present work we explore the possibility of using different hadronic form factors in each of the KΛN vertices. The use of different hadronic form factors, e.g. dipole, Gaussian, and generalized dipole, has been found to produce a more flexible isobar model, which can provide a significant improvement in the model.

Spaceborne Potential for Examining Taiga-Tundra Ecotone Form and Vulnerability

Science.gov (United States)

Montesano, Paul M.; Sun, Guoqing; Dubayah, Ralph O.; Ranson, K. Jon

2016-01-01

In the taiga-tundra ecotone (TTE), site-dependent forest structure characteristics can influence the subtle and heterogeneous structural changes that occur across the broad circumpolar extent. Such changes may be related to ecotone form, described by the horizontal and vertical patterns of forest structure (e.g., tree cover, density and height) within TTE forest patches, driven by local site conditions, and linked to ecotone dynamics. The unique circumstance of subtle, variable and widespread vegetation change warrants the application of spaceborne data including high-resolution (less than 5m) spaceborne imagery (HRSI) across broad scales for examining TTE form and predicting dynamics. This study analyzes forest structure at the patch-scale in the TTE to provide a means to examine both vertical and horizontal components of ecotone form. We demonstrate the potential of spaceborne data for integrating forest height and density to assess TTE form at the scale of forest patches across the circumpolar biome by (1) mapping forest patches in study sites along the TTE in northern Siberia with a multi-resolution suite of spaceborne data, and (2) examining the uncertainty of forest patch height from this suite of data across sites of primarily diffuse TTE forms. Results demonstrate the opportunities for improving patch-scale spaceborne estimates of forest height, the vertical component of TTE form, with HRSI. The distribution of relative maximum height uncertainty based on prediction intervals is centered at approximately 40%, constraining the use of height for discerning differences in forest patches. We discuss this uncertainty in light of a conceptual model of general ecotone forms, and highlight how the uncertainty of spaceborne estimates of height can contribute to the uncertainty in identifying TTE forms. A focus on reducing the uncertainty of height estimates in forest patches may improve depiction of TTE form, which may help explain variable forest responses in the

Validity of Two WPPSI Short Forms in Outpatient Clinic Settings.

Science.gov (United States)

Haynes, Jack P.; Atkinson, David

1983-01-01

Investigated the validity of subtest short forms for the Wechsler Preschool and Primary Scale of Intelligence in an outpatient population of 116 children. Data showed that the short forms underestimated actual level of intelligence and supported use of a short form only as a brief screening device. (LLL)

Diffusion from cylindrical waste forms

International Nuclear Information System (INIS)

Thomas, G.F.

1985-05-01

The diffusion of a single component material from a finite cylindrical waste form, initially containing a uniform concentration of the material, is investigated. Under the condition that the cylinder is maintained in a well-stirred bath, expressions for the fractional inventory leached and the leach rate are derived with allowance for the possible permanent immobilization of the diffusant through its decay to a stable product and/or its irreversible reaction with the waste form matrix. The usefulness of the reported results in nuclear waste disposal applications is emphasized. The results reported herein are related to those previously derived at Oak Ridge National Laboratory by Bell and Nestor. A numerical scheme involving the partial decoupling of nested infinite summations and the use of rapidly converging rational approximants is recommended for the efficient implementation of the expressions derived to obtain reliable estimates of the bulk diffusion constant and the rate constant describing the diffusant-waste form interaction from laboratory data

Improving the forming capability of laser dynamic forming by using rubber as a forming medium

Science.gov (United States)

Shen, Zongbao; Liu, Huixia; Wang, Xiao; Wang, Cuntang

2016-04-01

Laser dynamic forming (LDF) is a novel high velocity forming technique, which employs laser-generated shock wave to load the sample. The forming velocity induced by the high energy laser pulse may exceed the critical forming velocity, resulting in the occurrence of premature fracture. To avoid the above premature fracture, rubber is introduced in LDF as a forming medium to prolong the loading duration in this paper. Laser induced shock wave energy is transferred to the sample in different forming stages, so the forming velocity can be kept below the critical forming velocity when the initial laser energy is high for fracture. Bulge forming experiments with and without rubber were performed to study the effect of rubber on loading duration. The experimental results show that, the shock wave energy attenuates during the propagation through the rubber layer, the rubber can avoid the premature fracture. So the plastic deformation can continue, the forming capability of LDF is improved. Due to the severe plastic deformation under rubber compression, adiabatic shear bands (ASB) occur in LDF with rubber. The material softening in ASB leads to the irregular fracture, which is different from the premature fracture pattern (regular fracture) in LDF without rubber. To better understand this deformation behavior, Johnson-Cook model is used to simulate the dynamic response and the evolution of ASB of copper sample. The simulation results also indicate the rubber can prolong the loading duration.

Estimation of uranium forms in oceanic water

International Nuclear Information System (INIS)

Krylov, O.T.; Novikov, P.D.; Nesterova, M.P.

1985-01-01

A critical consideration is given to the notions about uranium forms in ocean water. To estimate uranium forms a model is suggested which takes into account possjble formation of complexes of uranyl ions and ocean water anions Cl - , SO 4 2- , CO 3 2- , HCO 3 - , OH - , F - . The available published data are used to estimate necessary thermodynamic stability constants of the complexes, activity coefficients and concentration of componenets. The thermodynamic calculation shows that uranium hydroxocomplex compounds UO 2 (OH) 4 2- (99.17%) and UO 2 (OH) 3 - (083%) are the most probable uranium forms in ocear water of 34.3% salinity at 25 deg C and 1 atm pressure

Constraints on the ωπ form factor from analyticity and unitarity

International Nuclear Information System (INIS)

Ananthanarayan, B.; Caprini, I.; Kubis, B.

2014-01-01

Motivated by the discrepancies noted recently between the theoretical calculations of the electromagnetic ωπ form factor and certain experimental data, we investigate this form factor using analyticity and unitarity in a framework known as the method of unitarity bounds. We use a QCD correlator computed on the spacelike axis by operator product expansion and perturbative QCD as input, and exploit unitarity and the positivity of its spectral function, including the two-pion contribution that can be reliably calculated using high-precision data on the pion form factor. From this information, we derive upper and lower bounds on the modulus of the ωπ form factor in the elastic region. The results provide a significant check on those obtained with standard dispersion relations, confirming the existence of a disagreement with experimental data in the region around 0.6 GeV. (orig.)

Constraints on the ωπ form factor from analyticity and unitarity

Energy Technology Data Exchange (ETDEWEB)

Ananthanarayan, B. [Indian Institute of Science, Centre for High Energy Physics, Bangalore (India); Caprini, I. [Horia Hulubei National Institute for Physics and Nuclear Engineering, P.O.B. MG-6, Magurele (Romania); Kubis, B. [Universitaet Bonn, Helmholtz-Institut fuer Strahlen-und Kernphysik (Theorie) and Bethe Center for Theoretical Physics, Bonn (Germany)

2014-12-01

Motivated by the discrepancies noted recently between the theoretical calculations of the electromagnetic ωπ form factor and certain experimental data, we investigate this form factor using analyticity and unitarity in a framework known as the method of unitarity bounds. We use a QCD correlator computed on the spacelike axis by operator product expansion and perturbative QCD as input, and exploit unitarity and the positivity of its spectral function, including the two-pion contribution that can be reliably calculated using high-precision data on the pion form factor. From this information, we derive upper and lower bounds on the modulus of the ωπ form factor in the elastic region. The results provide a significant check on those obtained with standard dispersion relations, confirming the existence of a disagreement with experimental data in the region around 0.6 GeV. (orig.)

Annotating Logical Forms for EHR Questions.

Science.gov (United States)

Roberts, Kirk; Demner-Fushman, Dina

2016-05-01

This paper discusses the creation of a semantically annotated corpus of questions about patient data in electronic health records (EHRs). The goal is to provide the training data necessary for semantic parsers to automatically convert EHR questions into a structured query. A layered annotation strategy is used which mirrors a typical natural language processing (NLP) pipeline. First, questions are syntactically analyzed to identify multi-part questions. Second, medical concepts are recognized and normalized to a clinical ontology. Finally, logical forms are created using a lambda calculus representation. We use a corpus of 446 questions asking for patient-specific information. From these, 468 specific questions are found containing 259 unique medical concepts and requiring 53 unique predicates to represent the logical forms. We further present detailed characteristics of the corpus, including inter-annotator agreement results, and describe the challenges automatic NLP systems will face on this task.

Compound forming extractants, solvating solvents and inert solvents IUPAC chemical data series

CERN Document Server

Marcus, Y; Kertes, A S

2013-01-01

Equilibrium Constants of Liquid-Liquid Distribution Reactions, Part III: Compound Forming Extractants, Solvating Solvents, and Inert Solvents focuses on the compilation of equilibrium constants of various compounds, such as acids, ions, salts, and aqueous solutions. The manuscript presents tables that show the distribution reactions of carboxylic and sulfonic acid extractants and their dimerization and other reactions in the organic phase and extraction reactions of metal ions from aqueous solutions. The book also states that the inorganic anions in these solutions are irrelevant, since they d

CTEPP-OH DATA COLLECTED ON FORM 04: PARENT PRE-MONITORING QUESTIONNAIRE

Science.gov (United States)

This data set contains data concerning the individuals living in the home and the possible sources and routes of exposure, and the activity patterns of the preschool children for CTEPP-OH. The parent was asked questions related to the age of their home; frequency of cleaning carp...

CTEPP NC DATA COLLECTED ON FORM 04: PARENT PRE-MONITORING QUESTIONNAIRE

Science.gov (United States)

This data set contains data concerning the individuals living in the home and the possible sources and routes of exposure, and the activity patterns of the preschool children. The parent was asked questions related to the age of their home; frequency of cleaning carpets, rugs, an...

E-mail survey with an attached Form: an off-line data collection alternative via the internet

Directory of Open Access Journals (Sweden)

Alexandre Reis Graeml

2008-09-01

Full Text Available As people start incorporating the Internet in their daily routine, using its resources to carry out their usual activities, it becomes easier to use the Web's environment also to collect data by means of electronic surveys. This paper reports the use of a quantitative research survey, which used an "intelligent" MS Word form, which was sent through e-mail to industrial manufacturers in the state of Sao Paulo - Brazil. The response speed was much better than usually achieved using the conventional procedure of sending the survey through regular mail. The return rate was satisfactory and the cost was much lower than usually incurred, due to the virtualization of the contact with the respondent. The initiative was so successful that the authors decided to share their experience with the academic community, contributing to the maturing of the e-mail survey methodology. Although the focus of this study was strictly academic, the authors believe that the adopted procedures are also suitable for market research, feedback gathering and other entrepreneurial needs.

Interpretation of leaching data for cementitious waste forms using analytical solutions based on mass transport theory and empiricism

International Nuclear Information System (INIS)

Spence, R.D.; Godbee, H.W.; Tallent, O.K.; McDaniel, E.W.; Nestor, C.W.

1991-01-01

Despite the demonstrated importance of diffusion control in leaching, other mechanisms have been observed to play a role and leaching from porous solid bodies is not simple diffusion. Only simple diffusion theory has been developed well enough for extrapolation, as yet. The well developed diffusion theory, used in data analysis by ANSI/ANS-16.1 and the NEWBOX program, can help in trying to extrapolate and predict the performance of solidified waste forms over decades and centuries, but the limitations and increased uncertainty must be understood in so doing. Treating leaching as a semi-infinite medium problem, as done in the Cote model, results in simpler equations, but limits, application to early leaching behavior when less than 20% of a given component has been leached. 18 refs., 2 tabs

Equilibrium Temperature Profiles within Fission Product Waste Forms

Energy Technology Data Exchange (ETDEWEB)

Kaminski, Michael D. [Argonne National Lab. (ANL), Argonne, IL (United States)

2016-10-01

We studied waste form strategies for advanced fuel cycle schemes. Several options were considered for three waste streams with the following fission products: cesium and strontium, transition metals, and lanthanides. These three waste streams may be combined or disposed separately. The decay of several isotopes will generate heat that must be accommodated by the waste form, and this heat will affect the waste loadings. To help make an informed decision on the best option, we present computational data on the equilibrium temperature of glass waste forms containing a combination of these three streams.

Single-point incremental forming and formability-failure diagrams

DEFF Research Database (Denmark)

Silva, M.B.; Skjødt, Martin; Atkins, A.G.

2008-01-01

In a recent work [1], the authors constructed a closed-form analytical model that is capable of dealing with the fundamentals of single point incremental forming and explaining the experimental and numerical results published in the literature over the past couple of years. The model is based...... of deformation that are commonly found in general single point incremental forming processes; and (ii) to investigate the formability limits of SPIF in terms of ductile damage mechanics and the question of whether necking does, or does not, precede fracture. Experimentation by the authors together with data...

75 FR 51093 - Agency Information Collection Activities: Form I-864, Form I-864A, Form I-864EZ, and Form I-864W...

Science.gov (United States)

2010-08-18

... DEPARTMENT OF HOMELAND SECURITY U.S. Citizenship and Immigration Services Agency Information... of Homeland Security, U.S. Citizenship and Immigration Services (USCIS) will be submitting the...: Form I-864, Form I-864A, Form I-864EZ, and Form I-864W; U.S. Citizenship and Immigration Services...

Dependent data in social sciences research forms, issues, and methods of analysis

CERN Document Server

Eye, Alexander; Wiedermann, Wolfgang

2015-01-01

This volume presents contributions on handling data in which the postulate of independence in the data matrix is violated. When this postulate is violated and when the methods assuming independence are still applied, the estimated parameters are likely to be biased, and statistical decisions are very likely to be incorrect. Problems associated with dependence in data have been known for a long time, and led to the development of tailored methods for the analysis of dependent data in various areas of statistical analysis. These methods include, for example, methods for the analysis of longitudinal data, corrections for dependency, and corrections for degrees of freedom. This volume contains the following five sections: growth curve modeling, directional dependence, dyadic data modeling, item response modeling (IRT), and other methods for the analysis of dependent data (e.g., approaches for modeling cross-section dependence, multidimensional scaling techniques, and mixed models). Researchers and graduate stud...

Developing the Scale for Quality of Life in Pediatric Oncology Patients Aged 13-18: Adolescent Form and Parent Form.

Science.gov (United States)

Bektas, Murat; Akdeniz Kudubes, Aslı; Ugur, Ozlem; Vergin, Canan; Demirag, Bengü

2016-06-01

This study aimed to develop the Scale for Quality of Life in Pediatric Oncology Patients Aged 13-18: Adolescent Form and Parent Form. We used the child and parent information form, Visual Quality of Life Scale, and our own scale, the Scale for Quality of Life in Pediatric Oncology Patients Aged 13-18: Adolescent Form and Parent Form. We finalized the 35-item scale to determine the items, received opinions from 14 specialists on the scale, and pilot-tested the scale in 25 children and their parents. We used Pearson correlation analysis, Cronbach α coefficient, factor analysis and receiver operating characteristics analysis to analyze the data. The total Cronbach α of the parent form was .97, the total factor load was .60-.97 and the total variance was 80.4%. The cutoff point of the parent form was 85.50. The total Cronbach α of the adolescent form was .98, the total factor load was .62-.96, and the total variance explained was 83.4%. The cutoff point of the adolescent form was 75.50. As a result of the parent form factor analysis, we determined the Kaiser-Meyer-Olkin coefficient as .83, the Barlett test χ(2) as 12,615.92; the factor coefficients of all items of the parent form ranged from .63 to .98. The factor coefficients of all items of the adolescent form ranged from .34 to .99. As a result of the adolescent form factor analysis, we determined the KMO as .79, and the Barlett test χ(2) as 13,970.62. Conclusively, we found that the adolescent form and the parent form were valid and reliable in assessing the children's quality of life. Copyright © 2016. Published by Elsevier B.V.

Biowaiver monograph for immediate-release solid oral dosage forms: fluconazole.

Science.gov (United States)

Charoo, Naseem; Cristofoletti, Rodrigo; Graham, Alexandra; Lartey, Paul; Abrahamsson, Bertil; Groot, D W; Kopp, Sabine; Langguth, Peter; Polli, James; Shah, Vinod P; Dressman, Jennifer

2014-12-01

Literature data pertaining to the decision to allow a waiver of in vivo bioequivalence (BE) testing requirements for the approval of immediate release (IR) solid oral dosage forms containing fluconazole as the only active pharmaceutical ingredient (API) are reviewed. The decision is based on solubility, dissolution, permeability, therapeutic index, pharmacokinetic parameters, pharmacodynamic properties, and other relevant data. BE/bioavailability (BA) problems and drug-excipients interaction data were also reviewed and taken into consideration. According to the biopharmaceutics classification system (BCS), fluconazole in polymorphic forms II and III is a BCS class I drug and has a wide therapeutic index. BE of test formulations from many different manufacturers containing different excipients confirmed that the risk of bioinequivalence because of formulation and manufacturing factors is low. It was inferred that risk can be further reduced if in vitro studies are performed according to biowaiver guidelines. Thus, it is concluded that a biowaiver can be recommended for fluconazole IR dosage forms if (a) fluconazole is present as polymorphic form II or III or any other form/mixture showing high solubility, (b) the selection of excipients be limited to those found in IR drug products approved in International Conference on Harmonisation (ICH) countries for the same dosage form and used in their usual amounts, and (c) both the test and comparator dosage form are very rapidly dissolving, or, rapidly dissolving throughout the shelf life with similar dissolution profiles at pH 1.2, 4.5, and 6.8. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

Form of multicomponent Fickian diffusion coefficients matrix

International Nuclear Information System (INIS)

Wambui Mutoru, J.; Firoozabadi, Abbas

2011-01-01

Highlights: → Irreversible thermodynamics establishes form of multicomponent diffusion coefficients. → Phenomenological coefficients and thermodynamic factors affect sign of diffusion coefficients. → Negative diagonal elements of diffusion coefficients matrix can occur in non-ideal mixtures. → Eigenvalues of the matrix of Fickian diffusion coefficients may not be all real. - Abstract: The form of multicomponent Fickian diffusion coefficients matrix in thermodynamically stable mixtures is established based on the form of phenomenological coefficients and thermodynamic factors. While phenomenological coefficients form a symmetric positive definite matrix, the determinant of thermodynamic factors matrix is positive. As a result, the Fickian diffusion coefficients matrix has a positive determinant, but its elements - including diagonal elements - can be negative. Comprehensive survey of reported diffusion coefficients data for ternary and quaternary mixtures, confirms that invariably the determinant of the Fickian diffusion coefficients matrix is positive.

A comparison of high-level waste form characteristics

International Nuclear Information System (INIS)

Salmon, R.; Notz, K.J.

1991-01-01

The US DOE is responsible for the eventual disposal in a repository of spent fuels, high-level waste (HLW) and other radioactive wastes that may require long-term isolation. This includes light-water reactor (LWR) spent fuel and immobilized HLW as the two major sources, plus other forms including non-LWR spent fuels and miscellaneous sources (such as activated metals in the Greater-Than-Class-C category). The Characteristics Data Base, sponsored by DOE's Office of Civilian Radioactive Waste Management (OCRWM), was created to systematically tabulate the technical characteristics of these materials. Data are presented here on the immobilized HLW forms that are expected to be produced between now and 2020

Child Support Enforcement Annual Data Reports Form 157 - YR 2013

Data.gov (United States)

U.S. Department of Health & Human Services — The Office of Child Support Enforcement's Annual Data Report from State agencies administering child support enforcement plans under Title IV-D of the Social...

Child Support Enforcement Annual Data Report Form 34A - 2007

Data.gov (United States)

U.S. Department of Health & Human Services — This dataset contains annual data on collections received and distributed by State agencies administering the Child Support Enforcement program under title IV-D of...

Child Support Enforcement Annual Data Report Form 34A - 2006

Data.gov (United States)

U.S. Department of Health & Human Services — This dataset contains annual data on collections received and distributed by State agencies administering the Child Support Enforcement program under title IV-D of...

Advances in metal forming expert system for metal forming

CERN Document Server

Hingole, Rahulkumar Shivajirao

2015-01-01

This comprehensive book offers a clear account of the theory and applications of advanced metal forming. It provides a detailed discussion of specific forming processes, such as deep drawing, rolling, bending extrusion and stamping. The author highlights recent developments of metal forming technologies and explains sound, new and powerful expert system techniques for solving advanced engineering problems in metal forming. In addition, the basics of expert systems, their importance and applications to metal forming processes, computer-aided analysis of metalworking processes, formability analysis, mathematical modeling and case studies of individual processes are presented.

Monitoring with Data Automata

Science.gov (United States)

Havelund, Klaus

2014-01-01

We present a form of automaton, referred to as data automata, suited for monitoring sequences of data-carrying events, for example emitted by an executing software system. This form of automata allows states to be parameterized with data, forming named records, which are stored in an efficiently indexed data structure, a form of database. This very explicit approach differs from other automaton-based monitoring approaches. Data automata are also characterized by allowing transition conditions to refer to other parameterized states, and by allowing transitions sequences. The presented automaton concept is inspired by rule-based systems, especially the Rete algorithm, which is one of the well-established algorithms for executing rule-based systems. We present an optimized external DSL for data automata, as well as a comparable unoptimized internal DSL (API) in the Scala programming language, in order to compare the two solutions. An evaluation compares these two solutions to several other monitoring systems.

Strange mesons and kaon-to-pion transition form factors from holography

International Nuclear Information System (INIS)

Abidin, Zainul; Carlson, Carl E.

2009-01-01

We present a calculation of the K l3 transition form factors using the AdS/QCD correspondence. We also solidify and extend our ability to calculate quantities in the flavor-broken versions of AdS/QCD. The normalization of the form factors is a crucial ingredient for extracting |V us | from data, and the results obtained here agree well with results from chiral perturbation theory and lattice gauge theory. The slopes and curvature of the form factors agree well with the data, and with what results are available from other methods of calculation.

A benefit/risk approach towards selecting appropriate pharmaceutical dosage forms - an application for paediatric dosage form selection.

Science.gov (United States)

Sam, Tom; Ernest, Terry B; Walsh, Jennifer; Williams, Julie L

2012-10-05

The design and selection of new pharmaceutical dosage forms involves the careful consideration and balancing of a quality target product profile against technical challenges and development feasibility. Paediatric dosage forms present particular complexity due to the diverse patient population, patient compliance challenges and safety considerations of this vulnerable population. This paper presents a structured framework for assessing the comparative benefits and risks of different pharmaceutical design options against pre-determined criteria relating to (1) efficacy, (2) safety and (3) patient access. This benefit/risk framework has then been applied to three hypothetical, but realistic, scenarios for paediatric dosage forms in order to explore its utility in guiding dosage form design and formulation selection. The approach allows a rigorous, systematic and qualitative assessment of the merits and disadvantages of each dosage form option and helps identify mitigating strategies to modify risk. The application of a weighting and scoring system to the criteria depending on the specific case could further refine the analysis and aid decision-making. In this paper, one case study is scored for illustrative purposes. However, it is acknowledged that in real development scenarios, the generation of actual data considering the very specific situation for the patient/product/developer would come into play to drive decisions on the most appropriate dosage form strategy. Copyright © 2012 Elsevier B.V. All rights reserved.

TIMESHARE – AN INNOVATIVE FORM OF HOSPITALITY

Directory of Open Access Journals (Sweden)

Petya Hristova

2016-06-01

Full Text Available The paper examines timeshare as a hybrid form of ownership in which the use of property is distributed in time as an innovative form in hospitality. Data are presented on the distribution of the concept in the world, Europe and Bulgaria in particular, and problem areas and opportunities are outlined. The main conclusions are related to the potential of the timeshare as a multivariate and flexible hotel product, able to respond adequately to the dynamic characteristics of the holiday market.

Effects of an electromagnetic quark form factor on meson properties

International Nuclear Information System (INIS)

Silvestre-Brac, B.

2002-01-01

A form factor is introduced in the quark electromagnetic current. Its effect is analyzed on charge mean square radii and form factors in the mesonic sector. The decay of a vector meson into lepton-antilepton pair is also affected. Two different expressions for the form factors, and two different types of quark potential are tested and some relativistic kinematical corrections are proposed. In any case the introduction of a quark form factor greatly improves the agreement with experimental data

How well do we know the electromagnetic form factors of the proton?

International Nuclear Information System (INIS)

Arrington, J.

2003-01-01

Several experiments have extracted proton electromagnetic form factors from elastic cross section measurements using the Rosenbluth technique. Global analyses of these measurements indicate approximate scaling of the electric and magnetic form factors (μ p G E p /G M p ≅1), in contrast to recent polarization transfer measurements from Jefferson Lab. We present here a global reanalysis of the cross section data aimed at understanding the disagreement between the Rosenbluth extraction and the polarization transfer data. We find that the individual cross section measurements are self-consistent, and that the new global analysis yields results that are still inconsistent with polarization measurements. This discrepancy indicates a fundamental problem in one of the two techniques, or a significant error in polarization transfer or cross section measurements. An error in the polarization data would imply a large error in the extracted electric form factor, while an error in the cross sections implies an uncertainty in the extracted form factors, even if the form factor ratio is measured exactly

Comparison of the amyloid pore forming properties of rat and human Alzheimer’s beta-amyloid peptide 1-42: Calcium imaging data

Directory of Open Access Journals (Sweden)

Coralie Di Scala

2016-03-01

Full Text Available The data here consists of calcium imaging of human neuroblastoma SH-SY5Y cells treated with the calcium-sensitive dye Fluo-4AM and then incubated with nanomolar concentrations of either human or rat Alzheimer’s β-amyloid peptide Aβ1-42. These data are both of a qualitative (fluorescence micrographs and semi-quantitative nature (estimation of intracellular calcium concentrations of cells probed by Aβ1-42 peptides vs. control untreated cells. Since rat Aβ1-42 differs from its human counterpart at only three amino acid positions, this comparative study is a good assessment of the specificity of the amyloid pore forming assay. The interpretation of this dataset is presented in the accompanying study “Broad neutralization of calcium-permeable amyloid pore channels with a chimeric Alzheimer/Parkinson peptide targeting brain gangliosides” [1].

Guideline for Optical Character Recognition Forms.

Science.gov (United States)

National Bureau of Standards (DOC), Washington, DC.

This publication provides materials relating to the design, preparation, acquisition, inspection, and application of Optical Character Recognition (OCR) forms in data entry systems. Since the materials are advisory and tutorial in nature, this publication has been issued as a guideline rather than as a standard in the Federal Information…

(EOI) Form

International Development Research Centre (IDRC) Digital Library (Canada)

Dorine Odongo

COLLABORATING TECHNICAL AGENCIES: EXPRESSION OF INTEREST FORM. • Please read the information provided about the initiative and the eligibility requirements in the Prospectus before completing this application form. • Ensure all the sections of the form are accurately completed and saved in PDF format.

76 FR 55915 - Agency Forms Undergoing Paperwork Reduction Act Review

Science.gov (United States)

2011-09-09

... type 2 diabetes DPRP Application Form........ 120 1 1 prevention programs. DPRP Evaluation Data... mechanism for recognizing organizations that deliver effective, community-based type 2 diabetes prevention...] Agency Forms Undergoing Paperwork Reduction Act Review The Centers for Disease Control and Prevention...

Results after nine years of field testing low-level radioactive waste forms using lysimeters

International Nuclear Information System (INIS)

McConnell, J.W. Jr.; Rogers, R.D.; Jastrow, J.D.; Sanford, W.E.; Sullivan, T.M.

1995-01-01

The Field Lysimeter Investigations: Low-Level Waste Data Base Development Program is obtaining information on the performance of radioactive waste forms. Ion-exchange resins from a nuclear power station were solidified into waste forms using Portland cement and vinyl ester-styrene. These waste forms are being tested to develop a low-level waste data base and to obtain information on survivability of waste forms in a disposal environment. This paper reviews radionuclide releases from those waste forms in the first 9 years of sampling. Included is a discussion of the recently discovered upward migration of radionuclides. Also, lysimeter data are applied to a performance assessment source term model, and initial results are presented

NGVLA Observations of Dense Gas Filaments in Star-Forming Regions

Science.gov (United States)

Di Francesco, James; Chen, Mike; Keown, Jared; GAS Team, KEYSTONE Team

2018-01-01

Recent observations of continuum emission from nearby star-forming regions with Herschel and JCMT have revealed that filaments are ubiquitous structures within molecular clouds. Such filaments appear to be intimately connected to star formation, with those having column densities of AV > 8 hosting the majority of prestellar cores and young protostars in clouds. Indeed, this “threshold” can be explained simply as the result of supercritical cylinder fragmentation. How specifically star-forming filaments form in molecular clouds, however, remains unclear, though gravity and turbulence are likely involved. Observations of their kinematics are needed to understand how mass flows both onto and through these filaments. We show here results from two recent surveys, the Green Bank Ammonia Survey (GAS) and the K-band Examinations of Young Stellar Object Natal Environments (KEYSTONE) that have used the Green Bank Telescope’s K-band Focal Plane Array instrument to map NH3 (1,1) emission from dense gas in nearby star-forming regions. Data from both surveys show that NH3 emission traces extremely well the high column density gas across these star-forming regions. In particular, the GAS results for NGC 1333 show NH3-based velocity gradients either predominantly parallel or perpendicular to the filament spines. Though the GAS and KEYSTONE data are vital for probing filaments, higher resolutions than possible with the GBT alone are needed to examine the kinematic patterns on the 0.1-pc scales of star-forming cores within filaments. We describe how the Next Generation Very Large Array (NGVLA) will uniquely provide the key wide-field data of high sensitivity needed to explore how ambient gas in molecular clouds forms filaments that evolve toward star formation.

Evaluation of various mass-transport theory and empiricism used in the interpretation of leaching data for cementitious waste forms

International Nuclear Information System (INIS)

Spence, R. D.; Godbee, H. W.; Tallent, O. K.; Nestor, C. W.; McDaniel, E. W.

1991-01-01

Despite the demonstrated importance of diffusion control in leaching, other mechanisms have been observed to play a role. Thus, leaching from porous solid bodies is not simple diffusion. However, only the theory of simple diffusion has been developed well enough for extrapolation. This diffusion theory, used in data analysis by ANSI/ANS-16.1 and the NEWBOX program, can help in trying to extrapolate and predict the performance of solidified waste forms over decades and centuries, but the limitations and increased uncertainty of such applications must be understood. Treating leaching as a semi-infinite medium problem, as done in the Cote model, results in simpler equations but limits application to early leaching behavior (when less than 20% of a given component has been leached)

Data Smearing: An Approach to Disclosure Limitation for Tabular Data

Directory of Open Access Journals (Sweden)

Toth Daniell

2014-12-01

Full Text Available Statistical agencies often collect sensitive data for release to the public at aggregated levels in the form of tables. To protect confidential data, some cells are suppressed in the publicly released data. One problem with this method is that many cells of interest must be suppressed in order to protect a much smaller number of sensitive cells. Another problem is that the covariates used to aggregate and level of aggregation must be fixed before the data is released. Both of these restrictions can severely limit the utility of the data. We propose a new disclosure limitation method that replaces the full set of microdata with synthetic data for use in producing released data in tabular form. This synthetic data set is obtained by replacing each unit’s values with a weighted average of sampled values from the surrounding area. The synthetic data is produced in a way to give asymptotically unbiased estimates for aggregate cells as the number of units in the cell increases. The method is applied to the U.S. Bureau of Labor Statistics Quarterly Census of Employment and Wages data, which is released to the public quarterly in tabular form and aggregated across varying scales of time, area, and economic sector.

Form factors and radiation widths of the giant multipole resonances

International Nuclear Information System (INIS)

Denisov, V.Yu.

1990-01-01

Simple analytic relations for the form factors of inelastic electron scattering in the Born approximation and radiation widths of the isovector and isoscalar giant multipole resonances are derived. The dynamic relationship between the volume and surface density vibrations were taken into account in this calculation. The form factors in the Born approximation were found to be in satisfactory agreement with experimental data in the region of small transferred momenta. The radiation widths of isoscalar multipole resonances increase when the number of nucleons increase as A 1/3 , and for isovector resonances this dependence has the form f(A)A 1/3 , where f(A) is a slowly increasing function of A. Radiation widths well fit the experimental data

Surface analysis: its uses and abuses in waste form evaluation

International Nuclear Information System (INIS)

McVay, G.L.; Pederson, L.R.

1981-01-01

Surface and near-surface analytical techniques are significant aids in understanding waste form-aqueous solution interactions. They can be beneficially employed to evaluate reaction layers on waste forms, to assess surface treatments prior to and after leaching, and to identify interactions with waste forms. Surface analyses are best used in conjunction with other types of analyses, such as solution analyses, in order to obtain a better overall understanding of reaction processes. In spite of all the benefits to be gained by using surface analyses, misinterpretations can result if care is not taken to properly obtain and analyze the data. In particular, the density variations through a reaction layer must be accounted for in both sputtering and data analysis techniques

Environmental data qualification system

International Nuclear Information System (INIS)

Hester, O.V.; Groh, M.R.

1989-01-01

The Integrated Environmental Data Management System (IEDMS) is a PC-based system that can support environmental investigations from their design stage and throughout the duration of the study. The system integrates data originating from the Sampling and Analysis Plan, field data and analytical findings. The IEDMS automated features include sampling guidance forms, barcoded sample labels and tags, field and analytical forms reproduction, sample tracking, analytical data qualification, completeness reports, and results and QC data reporting. The IEDMS has extensive automated capabilities that support a systematic and comprehensive process for performing quality assessment of EPA-CLP chemical analyses data. One product of this process is a unique and extremely useful tabular presentation of the data. One table contains the complete set of results and QC data included on the CLP data forms while presenting the information consistent with the chronology in which the analysis was performed. 3 refs., 1 fig

Modular forms

NARCIS (Netherlands)

Edixhoven, B.; van der Geer, G.; Moonen, B.; Edixhoven, B.; van der Geer, G.; Moonen, B.

2008-01-01

Modular forms are functions with an enormous amount of symmetry that play a central role in number theory, connecting it with analysis and geometry. They have played a prominent role in mathematics since the 19th century and their study continues to flourish today. Modular forms formed the

Restoration of APOLLO Data by the NSSDC and PDS Lunar Data Node

Science.gov (United States)

Williams, David R.; Hills, H. Kent; Guinness, Edward A.; Taylor, Patrick T.; McBride, Marie J.

2012-01-01

The Apollo Lunar Surface Experiment Packages (ALSEPs), suites of instruments deployed by the Apollo 12. 14, 15, 16 and 17 astronauts on the lunar surface, still represent the only in-situ measurements of the Moon's environment taken over long time periods, Much of these data are housed at the National Space Science Data Center (NSSDC) at Goddard Space Flight Center but are in forms that are not readily usable, such as microfilm, hardcopy, and magnetic tapes with older, obsolete formats. The Lunar Data Node (LDN) has been formed under the auspices of the Planetary Data System (PDS) Geosciences Node to put relevant, scientifically important Apollo data into accessible digital form for use by researchers and mission planners. The LDN has prioritized the restoration of these data based on their scientific and engineering value and the level of effort required. We will report on progress made and plans for future data restorations.

Simulation of nanotubular forms of matter

International Nuclear Information System (INIS)

Ivanovskii, Alexander L

1999-01-01

Data on the electronic and chemical structure of a new quasi-one-dimensional form of matter, viz., nanotubulenes, are generalised and systematised. Methods and approaches used in modern quantum chemistry for the simulation of the composition, structure, and properties of isolated tubulenes based on layered phases (graphite, boron nitride, boron carbide and boron carbonitride), nanotubular composites and nanotube crystals are described. The role of quantum theory in the development of the concepts of fundamental properties of substances in the nanotubular form and methods of their targeted modification is discussed. Prognostic potentials of theoretical models in solving material science problems are considered. The bibliography includes 197 references.

Finite volume form factors in the presence of integrable defects

International Nuclear Information System (INIS)

Bajnok, Z.; Buccheri, F.; Hollo, L.; Konczer, J.; Takacs, G.

2014-01-01

We developed the theory of finite volume form factors in the presence of integrable defects. These finite volume form factors are expressed in terms of the infinite volume form factors and the finite volume density of states and incorporate all polynomial corrections in the inverse of the volume. We tested our results, in the defect Lee–Yang model, against numerical data obtained by truncated conformal space approach (TCSA), which we improved by renormalization group methods adopted to the defect case. To perform these checks we determined the infinite volume defect form factors in the Lee–Yang model exactly, including their vacuum expectation values. We used these data to calculate the two point functions, which we compared, at short distance, to defect CFT. We also derived explicit expressions for the exact finite volume one point functions, which we checked numerically. In all of these comparisons excellent agreement was found

Constraints on the [Formula: see text] form factor from analyticity and unitarity.

Science.gov (United States)

Ananthanarayan, B; Caprini, I; Kubis, B

Motivated by the discrepancies noted recently between the theoretical calculations of the electromagnetic [Formula: see text] form factor and certain experimental data, we investigate this form factor using analyticity and unitarity in a framework known as the method of unitarity bounds. We use a QCD correlator computed on the spacelike axis by operator product expansion and perturbative QCD as input, and exploit unitarity and the positivity of its spectral function, including the two-pion contribution that can be reliably calculated using high-precision data on the pion form factor. From this information, we derive upper and lower bounds on the modulus of the [Formula: see text] form factor in the elastic region. The results provide a significant check on those obtained with standard dispersion relations, confirming the existence of a disagreement with experimental data in the region around [Formula: see text].

State-of-the-art review of materials properties of nuclear waste forms

International Nuclear Information System (INIS)

Mendel, J.E.; Nelson, R.D.; Turcotte, R.P.; Gray, W.J.; Merz, M.D.; Roberts, F.P.; Weber, W.J.; Westsik, J.H. Jr.; Clark, D.E.

1981-04-01

The Materials Characterization Center (MCC) was established at the Pacific Northwest Laboratory to assemble a standardized nuclear waste materials data base for use in research, systems and facility design, safety analyses, and waste management decisions. This centralized data base will be provided through the means of a Nuclear Waste Materials Handbook. The first issue of the Handbook will be published in the fall of 1981 in looseleaf format so that it can be updated as additional information becomes available. To ensure utmost reliability, all materials data appearing in the Handbook will be obtained by standard procedures defined in the Handbook and approved by an independent Materials Review Board (MRB) comprised of materials experts from Department of Energy laboratories and from universities and industry. In the interim before publication of the Handbook there is need for a report summarizing the existing materials data on nuclear waste forms. This review summarizes materials property data for the nuclear waste forms that are being developed for immobilization of high-level radioactive waste. It is intended to be a good representation of the knowledge concerning the properties of HLW forms as of March 1981. The table of contents lists the following topics: introduction which covers waste-form categories, and important waste-form materials properties; physical properties; mechanical properties; chemical durability; vaporization; radiation effects; and thermal phase stability

Transforming paper-based assessment forms to a digital format

DEFF Research Database (Denmark)

Jonasen, Tanja Svarre; Lunn, Tine Bieber; Helle, Tina

2017-01-01

Background: The aim of this paper is to provide the reader with an overall impression of the stepwise user-centred design approach including the specific methods used and lessons learned when transforming paper-based assessment forms into a prototype app, taking the Housing Enabler as an example....... Results: The design iterations resulted in the development of a Housing Enabler prototype app. The prototype app has several features and options that are new compared with the original paper-based Housing Enabler assessment form. These new features include a user friendly overview of the assessment form......; easy navigation by swiping back and forth between items; onsite data analysis; and ranking of the accessibility score, photo documentation and a data export facility. Conclusion: Based on the presented stepwise approach, a high-fidelity Housing Enabler prototype app was successfully developed...

Signal system data mining

Science.gov (United States)

2000-09-01

Intelligent transportation systems (ITS) include large numbers of traffic sensors that collect enormous quantities of data. The data provided by ITS is necessary for advanced forms of control, however basic forms of control, primarily time-of-day (TO...

Separating bathymetric data representing multiscale rhythmic bed forms : a geostatistical and spectral method compared

NARCIS (Netherlands)

van Dijk, Thaiënne A.G.P.; Lindenbergh, Roderik C.; Egberts, Paul J.P.

2008-01-01

The superimposition of rhythmic bed forms of different spatial scales is a common and natural phenomenon on sandy seabeds. The dynamics of such seabeds may interfere with different offshore activities and are therefore of interest to both scientists and offshore developers. State-of-the-art echo

Characteristic values for the forming of the magnesium alloy AZ31

International Nuclear Information System (INIS)

Doege, E.; Janssen, S.; Wieser, J.

2001-01-01

The aim of investigation and development at the institute for metal forming and metal forming machine tools (IFUM) at the University of Hanover, Germany is to advance magnesium forming scientifically which has so far been based on experience and empirically determined process data only. Optimized process parameter with a sound material scientific and process control base have to be determined for the deformation of magnesium wrought alloys in order to broaden the technical use of such alloys. Aim of the investigations introduced in this paper is the determination of characteristic values as well-founded basis for the forming technological processing of magnesium wrought alloys in massive forming processes. The basic data for the description of the deformation ability in the form of friction factor and flow curve is to be detected, especially in connection with the integration into an FEM-simulation. In order to achieve such data for the magnesium wrought alloy AZ31 the flow curve at temperatures between 250 and 300 C and the deformation ratio 1, 10, 20 and 30 are presented. On the other hand a ring upsetting test for the determination of the friction factor at altitude reductions of 30, 50, 70%, a tool temperature of 200 C, a work piece temperature between 300 and 400 C and different lubricants are shown for the said alloy. (orig.)

Proton electromagnetic form factors: present status and future perspectives at PANDA

Directory of Open Access Journals (Sweden)

Tomasi-Gustafsson E.

2015-01-01

Full Text Available Data and models on electromagnetic proton form factors are reviewed, highlighting the contribution foreseen by the PANDA collaboration. Electromagnetic hadron form factors contain essential information on the internal structure of hadrons. Precise and surprising data have been obtained at electron accelerators, applying the polarization method in electron-proton elastic scattering. At electron-positron colliders, using initial state radiation, BABAR measured proton time-like form factors in a wide time-like kinematical region and the BESIII collaboration will measure very precisely proton and neutron form factors in the threshold region. In the next future an antiproton beam with momentum up to 15 GeV/c will be available at FAIR (Darmstadt. Measurements of the reaction p̅ + p → e+ + e− by the PANDA collaboration will contribute to the individual determination of electric and magnetic form factors in the time-like region of momentum transfer squared, as well as to their first determination in the unphysical region (below the kinematical threshold, through the reaction p̅ + p → e+ + e− + π0. From the discussion on feasibility studies at PANDA, we focus on the consequences of such measurements in view of an unified description of form factors in the full kinematical region. We present models which have the necessary analytical requirements and apply to the data in the whole kinematical region.

41 CFR 61-250.11 - On what form must the data required by this part be submitted?

Science.gov (United States)

2010-07-01

... headquarters location and all other hiring locations for each company should be mailed in one package to the... headquarters location, COMPLETE the name and address for the parent company headquarters, LEAVE BLANK the name..., must file (A) one form covering the principal or headquarters office: (B) A separate form for each...

Diligence in determining the appropriate form of stationarity

Directory of Open Access Journals (Sweden)

André Heymans

2014-11-01

Full Text Available Orientation: One of the most vexing problems of modelling time series data is determining the appropriate form of stationarity, as it can have a significant influence on the model’s explanatory properties, which makes interpreting the results problematic. Research purpose: This article challenged the assumption that most financial time series are first differenced stationary. The common difference first, ask questions later approach was revisited by taking a more systematic approach when analysing the statistical properties of financial time series data. Motivation for the study: Since Nelson and Plosser’s (1982 argued that many macroeconomic time series are difference stationary, many econometricians simply differenced data in order to achieve stationarity. However, the inherent properties of time series data have changed over the past 30 years. This necessitates a proper evaluation of the properties of data before deciding on the appropriate course of action, in order to avoid over-differencing which causes variables to lose their explanatory ability that leads to spurious results. Research approach, design and method: This article introduced a rigorous process that enables econometricians to determine the most appropriate form of stationarity, which is led by the underlying statistical properties of several financial and economic variables. Main findings: The results highlighted the importance of consulting the d parameter to makea more informed decision, rather than only assuming that the data are I(1. Evidence also suggested that the appropriate form of stationarity can vary, but emphasises the importance to consider a series to be fractionally differenced. Practical/managerial implications: Only when data are correctly classified and transformed accordingly will the data be neither under- nor over-differenced, thus enhancing the validity of the results generated by statistical models. Contribution/value-add: By utilising this rigorous

Hadronic Form Factors in Asymptotically Free Field Theories

Science.gov (United States)

Gross, D. J.; Treiman, S. B.

1974-01-01

The breakdown of Bjorken scaling in asymptotically free gauge theories of the strong interactions is explored for its implications on the large q{sup 2} behavior of nucleon form factors. Duality arguments of Bloom and Gilman suggest a connection between the form factors and the threshold properties of the deep inelastic structure functions. The latter are addressed directly in an analysis of asymptotically free theories; and through the duality connection we are then led to statements about the form factors. For very large q{sup 2} the form factors are predicted to fall faster than any inverse power of q{sup 2}. For the more modest range of q{sup 2} reached in existing experiments the agreement with data is fairly good, though this may well be fortuitous. Extrapolations beyond this range are presented.

Review of radiation effects in solid-nuclear-waste forms

International Nuclear Information System (INIS)

Weber, W.J.

1981-09-01

Radiation effects on the stability of high-level nuclear waste (HLW) forms are an important consideration in the development of technology to immobilize high-level radioactive waste because such effects may significantly affect the containment of the radioactive waste. Since the required containment times are long (10 3 to 10 6 years), an understanding of the long-term cumulative effects of radiation damage on the waste forms is essential. Radiation damage of nuclear waste forms can result in changes in volume, leach rate, stored energy, structure/microstructure, and mechanical properties. Any one or combination of these changes might significantly affect the long-term stability of the nuclear waste forms. This report defines the general radiation damage problem in nuclear waste forms, describes the simulation techniques currently available for accelerated testing of nuclear waste forms, and reviews the available data on radiation effects in both glass and ceramic (primarily crystalline) waste forms. 76 references

Form factors in the projected linear chiral sigma model

International Nuclear Information System (INIS)

Alberto, P.; Coimbra Univ.; Bochum Univ.; Ruiz Arriola, E.; Fiolhais, M.; Urbano, J.N.; Coimbra Univ.; Goeke, K.; Gruemmer, F.; Bochum Univ.

1990-01-01

Several nucleon form factors are computed within the framework of the linear chiral soliton model. To this end variational means and projection techniques applied to generalized hedgehog quark-boson Fock states are used. In this procedure the Goldberger-Treiman relation and a virial theorem for the pion-nucleon form factor are well fulfilled demonstrating the consistency of the treatment. Both proton and neutron charge form factors are correctly reproduced, as well as the proton magnetic one. The shapes of the neutron magnetic and of the axial form factors are good but their absolute values at the origin are too large. The slopes of all the form factors at zero momentum transfer are in good agreement with the experimental data. The pion-nucleon form factor exhibits to great extent a monopole shape with a cut-off mass of Λ=690 MeV. Electromagnetic form factors for the vertex γNΔ and the nucleon spin distribution are also evaluated and discussed. (orig.)

iFORM: Incorporating Find Occurrence of Regulatory Motifs.

Science.gov (United States)

Ren, Chao; Chen, Hebing; Yang, Bite; Liu, Feng; Ouyang, Zhangyi; Bo, Xiaochen; Shu, Wenjie

2016-01-01

Accurately identifying the binding sites of transcription factors (TFs) is crucial to understanding the mechanisms of transcriptional regulation and human disease. We present incorporating Find Occurrence of Regulatory Motifs (iFORM), an easy-to-use and efficient tool for scanning DNA sequences with TF motifs described as position weight matrices (PWMs). Both performance assessment with a receiver operating characteristic (ROC) curve and a correlation-based approach demonstrated that iFORM achieves higher accuracy and sensitivity by integrating five classical motif discovery programs using Fisher's combined probability test. We have used iFORM to provide accurate results on a variety of data in the ENCODE Project and the NIH Roadmap Epigenomics Project, and the tool has demonstrated its utility in further elucidating individual roles of functional elements. Both the source and binary codes for iFORM can be freely accessed at https://github.com/wenjiegroup/iFORM. The identified TF binding sites across human cell and tissue types using iFORM have been deposited in the Gene Expression Omnibus under the accession ID GSE53962.

Electron form factors of deformable nuclei

International Nuclear Information System (INIS)

Tartakovskii, V.K.; Isupov, V.Yu.

1988-01-01

Using the smallness of the deformation parameter of the nucleus, we obtain simple explicit expressions for the form factors of electroexcitation of the low-lying rotation-vibration states of light, deformable, even-even nuclei. The expressions satisfactorily describe the experimental data on the excitation of collective nuclear states by the inelastic scattering of fast electrons

NNWSI waste form performance test development

International Nuclear Information System (INIS)

Bates, J.K.; Gerding, T.J.

1984-01-01

A test method has been developed to measure the release of radionuclides from the waste package under simulated NNWSI repository conditions, and to provide information concerning materials interactions that may occur in the repository. Data from 13 weeks of unsaturated testing are discussed and compared to that from a 13-week analog test. The data indicate that the waste form test is capable of producing consistent, reproducible results that will be useful in evaluating the role of the waste in the long-term performance of the repository. 6 references, 3 figures

Normalization of Phenotypic Data from a Clinical Data Warehouse: Case Study of Heterogeneous Blood Type Data with Surprising Results.

Science.gov (United States)

Cimino, James J

2015-01-01

Clinical data warehouses often contain analogous data from disparate sources, resulting in heterogeneous formats and semantics. We have developed an approach that attempts to represent such phenotypic data in its most atomic form to facilitate aggregation. We illustrate this approach with human blood antigen typing (ABO-Rh) data drawn from the National Institutes of Health's Biomedical Translational Research Information System (BTRIS). In applying the method to actual patient data, we discovered a 2% incidence of changed blood types. We believe our approach can be applied to any institution's data to obtain comparable patient phenotypes. The actual discrepant blood type data will form the basis for a future study of the reasons for blood typing variation.

Suicide risk factors among victims of bullying and other forms of violence: data from the 2009 and 2011 Oklahma Youth Risk Behavior Surveys.

Science.gov (United States)

Burk, Thad; Edmondson, Andrea Hamor; Whitehead, Tyler; Smith, Barbara

2014-06-01

The purpose of this study was to examine the association between exposure to bullying and other forms of violence and suicide risk among public high school students in Oklahoma. Data from the 2009 and 2011 Oklahoma Youth Risk Behavior Surveys were used for this analysis and were representative of public school students in grades 9-12 in Oklahoma. Students who were bullied, threatened or injured by someone with a weapon, physically hurt by their partner, or had ever been forced to have sex, were twice as likely as students who had not experienced victimization to have experienced persistent sadness, considered attempting suicide, made a plan to attempt suicide, and attempted suicide. The results of this study indicate that being a victim of bullying or other forms of violence significantly increases the likelihood for experiencing signs and symptoms of depression, suicidal thoughts, suicidal plans, or suicidal attempts.

Ceramic waste form qualification using results from witness tubes

International Nuclear Information System (INIS)

O'Holleran, T.P.; Johnson, S.G.; Bateman, K.J.

2002-01-01

A ceramic waste form has been developed to immobilize the salt waste stream from electrometallurgical treatment of spent nuclear fuel. The ceramic waste form is prepared in a hot isostatic press (HIP). The use of small, easily fabricated HIP capsules called witness tubes has been proposed as a practical way to obtain representative samples of ceramic waste form material for process monitoring, waste form qualification, and archiving. Witness tubes are filled with the same material used to fill the corresponding HIP can, and are HIPed along with the HIP can. Relevant physical, chemical, and performance (leach test) data are analyzed and compared. Differences between witness tube and HIP can materials are shown to be statistically insignificant, demonstrating that witness tubes do provide ceramic waste form material representative of the material in the corresponding HIP can.

76 FR 38654 - Agency Forms Undergoing Paperwork Reduction Act Review

Science.gov (United States)

2011-07-01

... consent for an interview. After the data collection phase, a multidisciplinary case review team (CRT) will... Post-Partum HIV- FIMR/HIV Maternal 300 1 1.5 infected Women. Interview Form. Daniel L. Holcomb, Reports...] Agency Forms Undergoing Paperwork Reduction Act Review The Centers for Disease Control and Prevention...

Data requirements and data sources for biodiversity priority area ...

Indian Academy of Sciences (India)

Unknown

tions required for a priority areas analysis. An important ..... Analysis Project, etc. Even before bias can be assessed and decisions taken either to proceed with existing data, model expected data. (see below), collect new data, or reject the data, those data have to be ..... Caudill 1990). They are a form of artificial intelligence,.

Radiation diagnosis of different forms of acute pancreatitis

International Nuclear Information System (INIS)

Stashuk, G.A.; Dubrova, S.Eh.; Emel'yanova, L.N.; Tripatkhi, S.

1999-01-01

Using the data on 123 patient with different forms of pancreatitis the ultrasonic and computerized tomographic semiotics of these states is described. It is shown that ultrasonography and computerized tomography are highly informative in diagnosis of different forms of the disease and its complications. Both methods not only assess the pancreatic parenchyma state, the spreading of process into adjacent anatomic structures, but also the dynamic control and perform diagnostic and treatment measures under visual control [ru

A possible form of the pion's structure function

International Nuclear Information System (INIS)

Long Ming; Huang Tao

1986-01-01

The pion's structure function behaviour is discussed by using the Fock state expansion of the hadronic wave function in QCD in this paper. As an example, we employ a model wave function of the Fock state in the light-cone and assume a Regge behaviour of a weight function for higher Fock states, and we get a possible form of the pion's structure function. This form is consistent with experimental data of the pion's structure function

The data array, a tool to interface the user to a large data base

Science.gov (United States)

Foster, G. H.

1974-01-01

Aspects of the processing of spacecraft data is considered. Use of the data array in a large address space as an intermediate form in data processing for a large scientific data base is advocated. Techniques for efficient indexing in data arrays are reviewed and the data array method for mapping an arbitrary structure onto linear address space is shown. A compromise between the two forms is given. The impact of the data array on the user interface are considered along with implementation.

Various forms of indexing HDMR for modelling multivariate classification problems

Energy Technology Data Exchange (ETDEWEB)

Aksu, Çağrı [Bahçeşehir University, Information Technologies Master Program, Beşiktaş, 34349 İstanbul (Turkey); Tunga, M. Alper [Bahçeşehir University, Software Engineering Department, Beşiktaş, 34349 İstanbul (Turkey)

2014-12-10

The Indexing HDMR method was recently developed for modelling multivariate interpolation problems. The method uses the Plain HDMR philosophy in partitioning the given multivariate data set into less variate data sets and then constructing an analytical structure through these partitioned data sets to represent the given multidimensional problem. Indexing HDMR makes HDMR be applicable to classification problems having real world data. Mostly, we do not know all possible class values in the domain of the given problem, that is, we have a non-orthogonal data structure. However, Plain HDMR needs an orthogonal data structure in the given problem to be modelled. In this sense, the main idea of this work is to offer various forms of Indexing HDMR to successfully model these real life classification problems. To test these different forms, several well-known multivariate classification problems given in UCI Machine Learning Repository were used and it was observed that the accuracy results lie between 80% and 95% which are very satisfactory.

Age and education corrected older adult normative data for a short form version of the Financial Capacity Instrument.

Science.gov (United States)

Gerstenecker, Adam; Eakin, Amanda; Triebel, Kristen; Martin, Roy; Swenson-Dravis, Dana; Petersen, Ronald C; Marson, Daniel

2016-06-01

Financial capacity is an instrumental activity of daily living (IADL) that comprises multiple abilities and is critical to independence and autonomy in older adults. Because of its cognitive complexity, financial capacity is often the first IADL to show decline in prodromal and clinical Alzheimer's disease and related disorders. Despite its importance, few standardized assessment measures of financial capacity exist and there is little, if any, normative data available to evaluate financial skills in the elderly. The Financial Capacity Instrument-Short Form (FCI-SF) is a brief measure of financial skills designed to evaluate financial skills in older adults with cognitive impairment. In the current study, we present age- and education-adjusted normative data for FCI-SF variables in a sample of 1344 cognitively normal, community-dwelling older adults participating in the Mayo Clinic Study of Aging (MCSA) in Olmsted County, Minnesota. Individual FCI-SF raw scores were first converted to age-corrected scaled scores based on position within a cumulative frequency distribution and then grouped within 4 empirically supported and overlapping age ranges. These age-corrected scaled scores were then converted to age- and education-corrected scaled scores using the same methodology. This study has the potential to substantially enhance financial capacity evaluations of older adults through the introduction of age- and education-corrected normative data for the FCI-SF by allowing clinicians to: (a) compare an individual's performance to that of a sample of similar age and education peers, (b) interpret various aspects of financial capacity relative to a normative sample, and (c) make comparisons between these aspects. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

33 CFR 125.11 - Form of Coast Guard Port Security Card.

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Form of Coast Guard Port Security... WATERFRONT FACILITIES OR VESSELS § 125.11 Form of Coast Guard Port Security Card. The Coast Guard Port... data. ...

Development of an accelerated leach test(s) for low-level waste forms

International Nuclear Information System (INIS)

Dougherty, D.R.; Fuhrmann, M.; Colombo, P.

1986-01-01

An accelerated leach test(s) is being developed to predict long-term leaching behavior of low-level radioactive waste (LLW) forms in their disposal environments. As necessary background, a literature survey of reported leaching mechanisms, available mathematical models and factors that affect leaching of LLW forms has been compiled. Mechanisms which have been identified include diffusion, dissolution, ion exchange, corrosion and surface effects. A computerized data base of LLW leaching data and mathematical models is being developed. The data is being used for model evaluation by curve fitting and statistical analysis according to standard procedures of statistical quality control. Long-term leach tests on portland cement, bitumen and vinyl ester-styrene (VES) polymer waste forms are underway which are designed to identify and evaluate factors that accelerate leaching without changing the mechanisms. Initial results on the effect of temperature on leachability indicate that the leach rates of cement and VES waste forms increase with increasing temperature, whereas, the leach rate of bitumen is little affected

Performance effect of multiple control forms in a Lean organization

DEFF Research Database (Denmark)

Kristensen, Thomas Borup; Israelsen, Poul

2012-01-01

Over the last decades Lean has developed into a prominent management philosophy reaching beyond shop floor tools. However, substantial support of performance effects from Lean is still scarce and at best with mixed results. Recently, research has turned its focus towards perceiving Lean...... as a control package. In this paper we present statistical support for enhanced performance coming from Lean. Furthermore, our results strongly support the perception of Lean as a set of multiple control forms (output, behavioral, and social controls) that complement each other. Therefore, performance...... is increased if the average level of control forms is increased, and performance is further increased if the control forms are balanced at the same level representing a complementary effect between them. Our data are archival data spanning multiple years in a strong Lean organization. The dependent performance...

CTEPP NC DATA COLLECTED ON FORM 06A: PARENT POST-MONITORING QUESTIONNAIRE

Science.gov (United States)

This data set contains data concerning the child’s daily activities and potential exposures to pollutants at their homes. It included questions on chemicals applied, cigarettes smoked, and cooking practices at the home over the 48-h monitoring period. It collected information on ...

Holographic estimate of the meson cloud contribution to nucleon axial form factor

Science.gov (United States)

Ramalho, G.

2018-04-01

We use light-front holography to estimate the valence quark and the meson cloud contributions to the nucleon axial form factor. The free couplings of the holographic model are determined by the empirical data and by the information extracted from lattice QCD. The holographic model provides a good description of the empirical data when we consider a meson cloud mixture of about 30% in the physical nucleon state. The estimate of the valence quark contribution to the nucleon axial form factor compares well with the lattice QCD data for small pion masses. Our estimate of the meson cloud contribution to the nucleon axial form factor has a slower falloff with the square momentum transfer compared to typical estimates from quark models with meson cloud dressing.

Against Logical Form

Directory of Open Access Journals (Sweden)

P N Johnson-Laird

2010-10-01

Full Text Available An old view in logic going back to Aristotle is that an inference is valid in virtue of its logical form. Many psychologists have adopted the same point of view about human reasoning: the first step is to recover the logical form of an inference, and the second step is to apply rules of inference that match these forms in order to prove that the conclusion follows from the premises. The present paper argues against this idea. The logical form of an inference transcends the grammatical forms of the sentences used to express it, because logical form also depends on context. Context is not readily expressed in additional premises. And the recovery of logical form leads ineluctably to the need for infinitely many axioms to capture the logical properties of relations. An alternative theory is that reasoning depends on mental models, and this theory obviates the need to recover logical form.

Radiocaesium forms in soil - problems of experimental determination

International Nuclear Information System (INIS)

Davydov, D.; Davydov, Yu.; Voronik, N.; Titov, A.; Toropova, N.

2006-01-01

A method for determining Cs form in soil is proposed based on the comparison of the experimental data on desorption of Cs radionuclide from the soil contaminated as a result of the Chernobyl accident and from the soil samples on which Cs was absorbed in laboratory (Cs was introduced in ionic form in solution). The data obtained on desorption of Cs from different soils show that Cs radionuclide is present in the soil contaminated as a result of the Chernobyl accident predominantly in an ionic form (sorbed on the different soil fractions). It has also been found that the ratio of 144 Ce/ 137 Cs radionuclides is much higher in solution than in the soil. At the same time the data on sorption of Cs and Ce radionuclides on different soils from solution 0.1M HCI + 0.1M KCI + 0.1M FeCI 3 show that the sorption ability of Cs is higher than the sorption ability of Ce for all the soil types investigated. Hence, it can be assumed that the mechanism of the radionuclides extraction is desorption rather than dissolution of the matrix particles, since in the letter case extraction value of the radionuclides would not be different. The fact that the ratio of 144 Ce/ 137 Cs radionuclides in solution remains higher than in soil independent on the distance from the Chernobyl NPP indicates that the form of the radionuclides does not change with the distance from the reactor. In order to determine what type of molecules Cs radionuclide can be bound to in soil the experiments on sorption of Cs on sandy soil in the presence of humic acid in solution has been carried out. The data obtained show that the presence of humic acids has none or little effect on the sorption of Cs. This indicates that interaction of Cs radionuclides with humic acid is week and these molecules can not be responsible for binding Cs in soil. (author)

Numerical and experimental investigation of stretch-flange forming

International Nuclear Information System (INIS)

Cinotti, N.; Shakeri, H.R.; Worswick, M.J.; Truttmann, S.; Finn, M.J.; Jain, M.; Lloyd, D.J.

2000-01-01

Simulations of stretch flange forming operations are undertaken using explicit dynamic finite element calculations incorporating anisotropic yield criteria. Simple circular stretch flanges utilizing a single circular punch to expand the cut-out were considered. Experiments were performed using 101mm diameter tooling on AA 5754 and AA 5182 aluminum alloy sheets, with varying cut-out and gauge size. Metallurgical aspects of the formability of these aluminum alloys and damage mechanisms were studied. Both optical and Scanning Electron Microscopy (SEM) were used to study ductile fracture behaviour in these materials during the forming operation. The limit strains obtained from the circular stretch flange formability experiments are compared to forming limit diagram (FLD) data from hemispherical dome specimens. (author)

CTEPP-OH DATA COLLECTED ON FORM 06A: PARENT POST-MONITORING QUESTIONNAIRE

Science.gov (United States)

This data set contains data concerning the child’s daily activities and potential exposures to pollutants at their homes for CTEPP-OH. It included questions on chemicals applied, cigarettes smoked, and cooking practices at the home over the 48-h monitoring period. It collected in...

Forming processes and mechanics of sheet metal forming

NARCIS (Netherlands)

Burchitz, I.A.

2004-01-01

The report is dealing with the numerical analysis of forming processes. Forming processes is the large group of manufacturing processes used to obtain various product shapes by means of plastic deformations. The report is organized as follows. An overview of the deformation processes and the

Alternate nuclear waste forms and interactions in geologic media

International Nuclear Information System (INIS)

Boatner, L.A.; Battle, G.C. Jr.

1981-04-01

The primary purposes of the conference on Alternate Nuclear Waste Forms and Interactions in Geologic Media were: First, to provide an opportunity for a review of the status of the research on some of the candidate alternative waste forms; second, to provide an opportunity for comparing the characteristics of alternate waste forms to those of glasses; and third, to stimulate increased interactions between those research groups that were engaged in a more basic approach to characterizing waste forms and those who were concerned with more applied aspects such as the processing of these materials. The motivating philosophy behind this third purpose of the conference was based on the idea that by operating from the soundest possible fundamental base for any of the candidate waste forms, hopefully any future unpleasant surprise - such as that alluded to earlier in the case of glass waste forms - could be avoided. Separate abstracts have been prepared for individual papers for inclusion in the Energy Data Base

Pre-form ceramic matrix composite cavity and method of forming and method of forming a ceramic matrix composite component

Science.gov (United States)

Monaghan, Philip Harold; Delvaux, John McConnell; Taxacher, Glenn Curtis

2015-06-09

A pre-form CMC cavity and method of forming pre-form CMC cavity for a ceramic matrix component includes providing a mandrel, applying a base ply to the mandrel, laying-up at least one CMC ply on the base ply, removing the mandrel, and densifying the base ply and the at least one CMC ply. The remaining densified base ply and at least one CMC ply form a ceramic matrix component having a desired geometry and a cavity formed therein. Also provided is a method of forming a CMC component.

The effects of radiation on intermediate-level waste forms. Task 3 characterization of radioactive waste forms a series of final reports (1985-89) no. 10

International Nuclear Information System (INIS)

Wilding, C.R.; Phillips, D.C.; Burnay, S.G.; Spindler, W.E.; Lyon, C.E.; Winter, J.A.

1991-01-01

The purpose of this programme was to determine the effects of radiation on the properties of intermediate-level waste forms relevant to their storage and disposal. It had two overall aims: to provide immediate data on the effect of radiation on important European ILW waste forms through accelerated laboratory tests; and to develop an understanding of the degradation processes so that long-term, low dose rate effects can be predicted with confidence from short-term, high dose rate experiments. The programme included cement waste forms containing inorganic wastes, organic matrix waste forms, and cement waste forms containing a substantial component of organic waste. Irradiations were carried out by external gamma sources and by the incorporation of alpha emitters, such as 238 Pu. Irradiated materials included matrix materials, simulated waste forms and real waste forms. 2 figs.; 3 tabs.; 8 refs

Leaching studies of low-level radioactive waste forms

International Nuclear Information System (INIS)

Dayal, R.; Arora, H.; Milian, L.; Clinton, J.

1985-01-01

A research program has been underway at the Brookhaven National Laboratory to investigate the release of radionuclides from low-level waste forms under laboratory conditions. This paper describes the leaching behavior of Cs-137 from two major low-level waste streams, that is, ion exchange bead resin and boric acid concentrate, solidified in Portland cement. The resultant leach data are employed to evaluate and predict the release behavior of Cs-137 from low-level waste forms under field burial conditions

Deuteron form factor measurements at low momentum transfers

Directory of Open Access Journals (Sweden)

Schlimme B. S.

2016-01-01

Full Text Available A precise measurement of the elastic electron-deuteron scattering cross section at four-momentum transfers of 0.24 fm−1 ≤ Q ≤ 2.7 fm−1 has been performed at the Mainz Microtron. In this paper we describe the utilized experimental setup and the necessary analysis procedure to precisely determine the deuteron charge form factor from these data. Finally, the deuteron charge radius rd can be extracted from an extrapolation of that form factor to Q2 = 0.

Collaborative Data Mining

Science.gov (United States)

Moyle, Steve

Collaborative Data Mining is a setting where the Data Mining effort is distributed to multiple collaborating agents - human or software. The objective of the collaborative Data Mining effort is to produce solutions to the tackled Data Mining problem which are considered better by some metric, with respect to those solutions that would have been achieved by individual, non-collaborating agents. The solutions require evaluation, comparison, and approaches for combination. Collaboration requires communication, and implies some form of community. The human form of collaboration is a social task. Organizing communities in an effective manner is non-trivial and often requires well defined roles and processes. Data Mining, too, benefits from a standard process. This chapter explores the standard Data Mining process CRISP-DM utilized in a collaborative setting.

On good ETOL forms

DEFF Research Database (Denmark)

Skyum, Sven

1978-01-01

This paper continues the study of ETOL forms and good EOL forms done by Maurer, Salomaa and Wood. It is proven that binary very complete ETOL forms exist, good synchronized ETOL forms exist and that no propagating or synchronized ETOL form can be very complete.......This paper continues the study of ETOL forms and good EOL forms done by Maurer, Salomaa and Wood. It is proven that binary very complete ETOL forms exist, good synchronized ETOL forms exist and that no propagating or synchronized ETOL form can be very complete....

Fundamental Science-Based Simulation of Nuclear Waste Forms

Energy Technology Data Exchange (ETDEWEB)

Devanathan, Ramaswami; Gao, Fei; Sun, Xin; Khaleel, Mohammad A.

2010-10-04

This report presents a hierarchical multiscale modeling scheme based on two-way information exchange. To account for all essential phenomena in waste forms over geological time scales, the models have to span length scales from nanometer to kilometer and time scales from picoseconds to millenia. A single model cannot cover this wide range and a multi-scale approach that integrates a number of different at-scale models is called for. The approach outlined here involves integration of quantum mechanical calculations, classical molecular dynamics simulations, kinetic Monte Carlo and phase field methods at the mesoscale, and continuum models. The ultimate aim is to provide science-based input in the form of constitutive equations to integrated codes. The atomistic component of this scheme is demonstrated in the promising waste form xenotime. Density functional theory calculations have yielded valuable information about defect formation energies. This data can be used to develop interatomic potentials for molecular dynamics simulations of radiation damage. Potentials developed in the present work show a good match for the equilibrium lattice constants, elastic constants and thermal expansion of xenotime. In novel waste forms, such as xenotime, a considerable amount of data needed to validate the models is not available. Integration of multiscale modeling with experimental work is essential to generate missing data needed to validate the modeling scheme and the individual models. Density functional theory can also be used to fill knowledge gaps. Key challenges lie in the areas of uncertainty quantification, verification and validation, which must be performed at each level of the multiscale model and across scales. The approach used to exchange information between different levels must also be rigorously validated. The outlook for multiscale modeling of wasteforms is quite promising.

Methods of forming semiconductor devices and devices formed using such methods

Science.gov (United States)

Fox, Robert V; Rodriguez, Rene G; Pak, Joshua

2013-05-21

Single source precursors are subjected to carbon dioxide to form particles of material. The carbon dioxide may be in a supercritical state. Single source precursors also may be subjected to supercritical fluids other than supercritical carbon dioxide to form particles of material. The methods may be used to form nanoparticles. In some embodiments, the methods are used to form chalcopyrite materials. Devices such as, for example, semiconductor devices may be fabricated that include such particles. Methods of forming semiconductor devices include subjecting single source precursors to carbon dioxide to form particles of semiconductor material, and establishing electrical contact between the particles and an electrode.

Organizational forms and knowledge absorption

Directory of Open Access Journals (Sweden)

Radovanović Nikola

2016-01-01

Full Text Available Managing the entire portion of knowledge in an organization is a challenging task. At the organizational level, there can be enormous quantities of unknown, poorly valued or inefficiently applied knowledge. This is normally followed with the underdeveloped potential or inability of organizations to absorb knowledge from external sources. Facilitation of the efficient internal flow of knowledge within the established communication network may positively affect organizational capacity to absorb or identify, share and subsequently apply knowledge to commercial ends. Based on the evidences that the adoption of different organizational forms affects knowledge flows within an organization, this research analyzed the relationship between common organizational forms and absorptive capacity of organizations. In this paper, we test the hypothesis stating that the organizational structure affects knowledge absorption and exploitation in the organization. The methodology included quantitative and qualitative research method based on a questionnaire, while the data has been statistically analyzed and the hypothesis has been tested with the use of cross-tabulation and chi-square tests. The findings suggest that the type of organizational form affects knowledge absorption capacity and that having a less formalized and more flexible structure in an organization increases absorbing and exploiting opportunities of potentially valuable knowledge.

Foreign Data Library

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The Foreign Data Library consists of meteorological data from nations other than the United States. The data are on original observational forms, in publications,...

Frequency of Verbal Forms and Language Standard

Directory of Open Access Journals (Sweden)

Timur I. Galeev

2017-11-01

Full Text Available The article offers the description of a modern experiment, which gives the possibility of complex information extraction about the cognitive structure of the linguistic evolution of Language Standart (Norm. The study was conducted using the Google Books Corpus, which provides unprecedented opportunities for linguistic studies. The purpose of the experiment was to identify the patterns of competing forms evolution within the center of the verbal paradigm (3Sg and 3Pl on the basis of the data concerning the frequency of their use. The study was conducted on the material of excess verb forms with the variability of a/o vowels in a root (обусловливать/обуславливать. The graphs for variable word form competition clearly illustrate that the process of norm change consists of stages, each of which has numerical characteristics of two competing word form use. The chronological frameworks for an inflectional model change are established with the accuracy of up to 10 years. The graphs obtained as the result of the experiment make it possible to conclude that almost half of the verbs were not variative, although they previously considered. During the discussion of the obtained empirical data, a conclusion is made about the morphemic structure of a word, in which a root vowel changes. Possessing the information about similar processes in other verb paradigms, researchers are able to predict a possible change of inflectional models in the future and, as a consequence, the fixing of a new norm in lexicographical, orthographic and orthoepic sources.

Performance of borosilicate glass, Synroc and spent fuel as nuclear waste forms

International Nuclear Information System (INIS)

Lutze, W.; Grambow, B.; Ewing, R.C.

1990-01-01

Presently, there are three prominent waste forms under consideration for the disposal of high-level waste: Borosilicate glass and Synroc for high-level radioactive waste from fuel reprocessing and spent fuel as the waste form for non-reprocessed fuel. Using the present experimental data base, one may compare the performance of these three waste forms under repository relevant conditions. In low water flow regimes and at temperatures less than 100 degree C, the fractional release rates of all three waste forms are low, on the order of 10-7/d or less and may decrease with time. Under these conditions the three waste forms behave similarly. At elevated temperatures or in high flow regimes, the durability of borosilicate glass will be much less than that of Synroc, and thus, for certain disposal schemes (e.g., deep burial) Synroc is preferable. All predictions of the long-term behavior are based on the extrapolation of short term experimental data, we point out that appropriate and useful natural analogues are available for each of these waste forms and should be used in the performance assessment of each waste form's long-term behavior. 14 refs

Up- and Down-Quark Contributions to the Nucleon Form Factors

Directory of Open Access Journals (Sweden)

Qattan I. A.

2014-03-01

Full Text Available Recent measurements of the neutron s electric to magnetic form factors ratio, Rn = µnGnE/GnM, up to 3.4 (GeV/c2 combined with existing Rp = µpGpE/GpM measurements in the same Q2 range allowed, for the first time, a separation of the up- and downquark contributions to the form factors at high Q2, as presented by Cates, et al.. Our analysis expands on the original work by including additional form factor data, applying two-photon exchange (TPE corrections, and accounting for the uncertainties associated with all of the form factor measurements.

Electroweak form factors

International Nuclear Information System (INIS)

Singh, S.K.

2002-01-01

The present status of electroweak nucleon form factors and the N - Δ transition form factors is reviewed. Particularly the determination of dipole mass M A in the axial vector form factor is discussed

Child Support Enforcement Annual Data Report Form 157 – YR 2014

Data.gov (United States)

U.S. Department of Health & Human Services — The Office of Child Support Enforcement's Annual Data Report from State agencies administering child support enforcement plans under Title IV-D of the Social...

Child Support Enforcement Annual Data Report Form 34A – 2011

Data.gov (United States)

U.S. Department of Health & Human Services — This dataset contains annual data on collections received and distributed by State agencies administering the Child Support Enforcement program under title IV-D of...

Final waste classification and waste form technical position papers

International Nuclear Information System (INIS)

1983-05-01

The waste classification technical position paper describes overall procedures acceptable to NRC staff which may be used by licensees to determine the presence and concentrations of the radionuclides listed in section 61.55, and thereby classifying waste for near-surface disposal. This technical position paper also provides guidance on the types of information which should be included in shipment manifests accompanying waste shipments to near-surface disposal facilities. The technical position paper on waste form provides guidance to waste generators on test methods and results acceptable to NRC staff for implementing the 10 CFR Part 61 waste form requirements. It can be used as an acceptable approach for demonstrating compliance with the 10 CFR Part 61 waste structural stability criteria. This technical position paper includes guidance on processing waste into an acceptable stable form, designing acceptable high-integrity containers, packaging cartridge filters, and minimizing radiation effects on organic ion-exchange resins. The guidance in the waste form technical position paper may be used by licensees as the basis for qualifying process control programs to meet the waste form stability requirements, including tests which can be used to demonstrate resistance to degradation arising from the effects of compression, moisture, microbial activity, radiation, and chemical changes. Generic test data (e.g., topical reports prepared by vendors who market solidification technology) may be used for process control program qualification where such generic data is applicable to the particular types of waste generated by a licensee

Development of an accelerated leach test(s) for low-level waste forms

International Nuclear Information System (INIS)

Dougherty, D.R.; Fuhrmann, M.; Colombo, P.

1985-01-01

An accelerated leach test(s) is being developed to predict long-term leaching behavior of low-level radioactive waste (LLW) forms in their disposal environments. As necessary background, a literature survey of reported leaching mechanisms, available mathematical models and factors that affect leaching of LLW forms has been compiled. Mechanisms which have been identified include diffusion, dissolution, ion exchange, corrosion and surface effects. A computerized data base of LLW leaching data and mathematical models is being developed. The data is being used for model evaluation by curve fitting and statistical analysis according to standard procedures of statistical quality control. Long-term leach tests on portland cement, bitumen and vinyl ester-styrene (VES) polymer waste forms are underway which are designed to identify and evaluate factors that accelerate leaching without changing the mechanisms. Initial results on the effect of temperature on leachability indicate that the leach rates of cement and VES waste forms increase with increasing temperature, whereas, the leach rate of bitumen is little affected. 10 refs., 5 figs

Calculation of the Nucleon Axial Form Factor Using Staggered Lattice QCD

Energy Technology Data Exchange (ETDEWEB)

Meyer, Aaron S. [Fermilab; Hill, Richard J. [Perimeter Inst. Theor. Phys.; Kronfeld, Andreas S. [Fermilab; Li, Ruizi [Indiana U.; Simone, James N. [Fermilab

2016-10-14

The nucleon axial form factor is a dominant contribution to errors in neutrino oscillation studies. Lattice QCD calculations can help control theory errors by providing first-principles information on nucleon form factors. In these proceedings, we present preliminary results on a blinded calculation of $g_A$ and the axial form factor using HISQ staggered baryons with 2+1+1 flavors of sea quarks. Calculations are done using physical light quark masses and are absolutely normalized. We discuss fitting form factor data with the model-independent $z$ expansion parametrization.

78 FR 57000 - Reports, Forms, and Recordkeeping Requirements

Science.gov (United States)

2013-09-16

... automated, electronic, mechanical, or other technological collection techniques or other forms of...: National Automotive Sampling System (NASS). Type of Request: Extension of a currently approved collection...). The National Automotive Sampling System (NASS) Crashworthiness Data System (CDS) of the National...

Developing a simplified consent form for biobanking.

Science.gov (United States)

Beskow, Laura M; Friedman, Joëlle Y; Hardy, N Chantelle; Lin, Li; Weinfurt, Kevin P

2010-10-08

Consent forms have lengthened over time and become harder for participants to understand. We sought to demonstrate the feasibility of creating a simplified consent form for biobanking that comprises the minimum information necessary to meet ethical and regulatory requirements. We then gathered preliminary data concerning its content from hypothetical biobank participants. We followed basic principles of plain-language writing and incorporated into a 2-page form (not including the signature page) those elements of information required by federal regulations and recommended by best practice guidelines for biobanking. We then recruited diabetes patients from community-based practices and randomized half (n = 56) to read the 2-page form, first on paper and then a second time on a tablet computer. Participants were encouraged to use "More information" buttons on the electronic version whenever they had questions or desired further information. These buttons led to a series of "Frequently Asked Questions" (FAQs) that contained additional detailed information. Participants were asked to identify specific sentences in the FAQs they thought would be important if they were considering taking part in a biorepository. On average, participants identified 7 FAQ sentences as important (mean 6.6, SD 14.7, range: 0-71). No one sentence was highlighted by a majority of participants; further, 34 (60.7%) participants did not highlight any FAQ sentences. Our preliminary findings suggest that our 2-page form contains the information that most prospective participants identify as important. Combining simplified forms with supplemental material for those participants who desire more information could help minimize consent form length and complexity, allowing the most substantively material information to be better highlighted and enabling potential participants to read the form and ask questions more effectively.

PowerForms

DEFF Research Database (Denmark)

Brabrand, Claus; Møller, Anders; Ricky, Mikkel

2000-01-01

All uses of HTML forms may benefit from validation of the specified input field values. Simple validation matches individual values against specified formats, while more advanced validation may involve interdependencies of form fields. There is currently no standard for specifying or implementing...

Characterization of low and medium level radioactive waste forms

International Nuclear Information System (INIS)

Sambell, R.A.J.

1983-01-01

The work reported was carried out during the first year of the Commission of the European Community's programme on the characterization of low and medium level waste forms. Ten reference waste forms plus others of special national interest have been identified covering PWR, BWR, GCR and reprocessing wastes. The immobilising media include the three main matrices: cement, polymers and bitumen, and a glass. Characterization is viewed as one input to quality assurance of the waste form and covers: waste-matrix compatibility, radiation effects, leaching, microbiological attack, shrinkage and swelling, ageing processes and thermal effects. The aim is a balanced programme of comparative data, predictive modelling and an undserstanding of basic mechanisms

Learning regularization parameters for general-form Tikhonov

International Nuclear Information System (INIS)

Chung, Julianne; Español, Malena I

2017-01-01

Computing regularization parameters for general-form Tikhonov regularization can be an expensive and difficult task, especially if multiple parameters or many solutions need to be computed in real time. In this work, we assume training data is available and describe an efficient learning approach for computing regularization parameters that can be used for a large set of problems. We consider an empirical Bayes risk minimization framework for finding regularization parameters that minimize average errors for the training data. We first extend methods from Chung et al (2011 SIAM J. Sci. Comput. 33 3132–52) to the general-form Tikhonov problem. Then we develop a learning approach for multi-parameter Tikhonov problems, for the case where all involved matrices are simultaneously diagonalizable. For problems where this is not the case, we describe an approach to compute near-optimal regularization parameters by using operator approximations for the original problem. Finally, we propose a new class of regularizing filters, where solutions correspond to multi-parameter Tikhonov solutions, that requires less data than previously proposed optimal error filters, avoids the generalized SVD, and allows flexibility and novelty in the choice of regularization matrices. Numerical results for 1D and 2D examples using different norms on the errors show the effectiveness of our methods. (paper)

From form factors to generalized parton distributions

Energy Technology Data Exchange (ETDEWEB)

Diehl, Markus

2013-06-15

I present an extraction of generalized parton distributions from selected data on the electromagnetic nucleon form factors. The extracted distributions can in particular be used to quantify the contribution to the proton spin from the total angular momentum carried by valence quarks, as well as their transverse spatial distribution inside the proton.

Voice as Form of Life and Life Form

Directory of Open Access Journals (Sweden)

Sandra Laugier

2015-10-01

Full Text Available This paper studies the concept of form of life as central to ordinary language philosophy (as understood in Wittgenstein’s, Austin’s and Stanley Cavell’s work: philosophy of our language as spoken; pronounced by a human voice within a form of life. Such an approach to Wittgenstein’s later philosophy shifts the question of the common use of language – central to Wittgenstein’s Investigations – to the definition of the subject as voice, and to the reinvention of subjectivity in language. The voice is both a subjective and common expression: it is what makes it possible for my individual voice, or claim, to become shared and for our forms of life to be intertwined with a lifeform.

Water deuteration in star-forming regions: Contribution of Herschel/HIFI spectroscopic data

International Nuclear Information System (INIS)

Coutens, Audrey

2012-01-01

Water (H_2O) is one of the most abundant molecules in the interstellar medium. In addition to being a primordial ingredient in the emergence of life, this species plays an essential role in the process of star formation through the cooling of warm gas. It also controls the chemistry for many species, either in the gas phase or on the grain surfaces. Studying its deuterated form HDO is a unique opportunity, through the estimation of the HDO/H_2O ratio, to constrain the mechanisms of water formation and to better understand the origin of water contained in terrestrial oceans. Indeed, recent results obtained with the Herschel satellite show that the HDO/H_2O ratio observed in comets is similar to the value measured in oceans (∼1.5 10"-"4), which suggests that comets could have brought a large fraction to Earth to form the oceans during heavy bombardments (Hartogh et al. 2011). In this thesis, I was interested in the study of deuterated water in the first stages of star formation, the Class 0 stage, which precede the formation of the protoplanetary disk leading to the birth of comets and planets. Through a 1D non-Local Thermodynamic Equilibrium radiative transfer modeling of the line profiles of the numerous HDO and H_2"1"8O transitions detected with the HIFI (Heterodyne Instrument for Far-Infrared) instrument onboard the Herschel Space Observatory and ground-based telescopes (IRAM, JCMT), I determined that the HDO/H_2O ratios of the solar-type protostar IRAS 16293-2422 was about 2% in the hot corino, the inner part of the protostellar envelope sufficiently warm (T ≥ 100 K) to desorb in gas phase the water molecules trapped in the icy grain mantles, and about 0.5% in the colder part of the envelope. This study (Coutens et al. 2012) also allowed me to show that an absorbing layer rich in water surrounds the protostar. This layer could be produced by the photo-desorption through the UV field of the water molecules frozen on the grains, on the edges of the molecular

76 FR 21946 - Proposed Collection; Comment Request for Form 990-BL; Schedule A (Form 990-BL), Form 6069

Science.gov (United States)

2011-04-19

... Initial Excise Tax Return for Black Lung Benefit Trusts and Certain Related Persons, and Form 6069, Return of Excise Tax on Excess Contributions to Black Lung Benefit Trust Under Section 4953 and Computation...: Form 990-BL, Schedule A (Form 990-BL), Information and Initial Excise Tax Return for Black Lung Benefit...

Cross-platform digital assessment forms for evaluating surgical skills

Directory of Open Access Journals (Sweden)

Steven Arild Wuyts Andersen

2015-04-01

Full Text Available A variety of structured assessment tools for use in surgical training have been reported, but extant assessment tools often employ paper-based rating forms. Digital assessment forms for evaluating surgical skills could potentially offer advantages over paper-based forms, especially in complex assessment situations. In this paper, we report on the development of cross-platform digital assessment forms for use with multiple raters in order to facilitate the automatic processing of surgical skills assessments that include structured ratings. The FileMaker 13 platform was used to create a database containing the digital assessment forms, because this software has cross-platform functionality on both desktop computers and handheld devices. The database is hosted online, and the rating forms can therefore also be accessed through most modern web browsers. Cross-platform digital assessment forms were developed for the rating of surgical skills. The database platform used in this study was reasonably priced, intuitive for the user, and flexible. The forms have been provided online as free downloads that may serve as the basis for further development or as inspiration for future efforts. In conclusion, digital assessment forms can be used for the structured rating of surgical skills and have the potential to be especially useful in complex assessment situations with multiple raters, repeated assessments in various times and locations, and situations requiring substantial subsequent data processing or complex score calculations.

Application of data mining techniques for nuclear data and instrumentation

International Nuclear Information System (INIS)

Toshniwal, Durga

2013-01-01

Data mining is defined as the discovery of previously unknown, valid, novel, potentially useful, and understandable patterns in large databases. It encompasses many different techniques and algorithms which differ in the kinds of data that can be analyzed and the form of knowledge representation used to convey the discovered knowledge. Patterns in the data can be represented in many different forms, including classification rules, association rules, clusters, etc. Data mining thus deals with the discovery of hidden trends and patterns from large quantities of data. The field of data mining is emerging as a new, fundamental research area with important applications to science, engineering, medicine, business, and education. It is an interdisciplinary research area and draws upon several roots, including database systems, machine learning, information systems, statistics and expert systems. Data mining, when performed on time series data, is known as time series data mining (TSDM). A time series is a sequence of real numbers, each number representing a value at a point of time. During the past few years, there has been an explosion of research in the area of time series data mining. This includes attempts to model time series data, to design languages to query such data, and to develop access structures to efficiently process queries on such data. Time series data arises naturally in many real-world applications. Efficient discovery of knowledge through time series data mining can be helpful in several domains such as: Stock market analysis, Weather forecasting etc. An important application area of data mining techniques is in nuclear power plant and related data. Nuclear power plant data can be represented in form of time sequences. Often it may be of prime importance to analyze such data to find trends and anomalies. The general goals of data mining include feature extraction, similarity search, clustering and classification, association rule mining and anomaly

Constraints on the ωπ Form Factor from Analyticity and Unitarity

Science.gov (United States)

Ananthanarayan, B.; Caprini, Irinel; Kubis, Bastian

Form factors are important low-energy quantities and an accurate knowledge of these sheds light on the strong interactions. A variety of methods based on general principles have been developed to use information known in different energy regimes to constrain them in regions where experimental information needs to be tested precisely. Here we review our recent work on the electromagnetic ωπ form factor in a model-independent framework known as the method of unitarity bounds, partly motivated by the discre-pancies noted recently between the theoretical calculations of the form factor based on dispersion relations and certain experimental data measured from the decay ω → π0γ*. We have applied a modified dispersive formalism, which uses as input the discontinuity of the ωπ form factor calculated by unitarity below the ωπ threshold and an integral constraint on the square of its modulus above this threshold. The latter constraint was obtained by exploiting unitarity and the positivity of the spectral function of a QCD correlator, computed on the spacelike axis by operator product expansion and perturbative QCD. An alternative constraint is obtained by using data available at higher energies for evaluating an integral of the modulus squared with a suitable weight function. From these conditions we derived upper and lower bounds on the modulus of the ωπ form factor in the region below the ωπ threshold. The results confirm the existence of a disagreement between dispersion theory and experimental data on the ωπ form factor around 0:6 GeV, including those from NA60 published in 2016.

FOCIH: Form-Based Ontology Creation and Information Harvesting

Science.gov (United States)

Tao, Cui; Embley, David W.; Liddle, Stephen W.

Creating an ontology and populating it with data are both labor-intensive tasks requiring a high degree of expertise. Thus, scaling ontology creation and population to the size of the web in an effort to create a web of data—which some see as Web 3.0—is prohibitive. Can we find ways to streamline these tasks and lower the barrier enough to enable Web 3.0? Toward this end we offer a form-based approach to ontology creation that provides a way to create Web 3.0 ontologies without the need for specialized training. And we offer a way to semi-automatically harvest data from the current web of pages for a Web 3.0 ontology. In addition to harvesting information with respect to an ontology, the approach also annotates web pages and links facts in web pages to ontological concepts, resulting in a web of data superimposed over the web of pages. Experience with our prototype system shows that mappings between conceptual-model-based ontologies and forms are sufficient for creating the kind of ontologies needed for Web 3.0, and experiments with our prototype system show that automatic harvesting, automatic annotation, and automatic superimposition of a web of data over a web of pages work well.

Behaviour of intermediate-level waste forms in an aqueous environment

International Nuclear Information System (INIS)

Amarantos, S.; DeBatist, R.; Brodersen, K.; Glasser, F.P.; Pottier, P.E.; Vejmelka, R.; Zamorani, E.

1985-01-01

Under Action 1 of the Second Community Programme (1980-1984), study continued of the behavoiur of low and medium activity waste matrices using 10 reference waste forms (RWFs) representative of the main waste packages produced in the Community. The aim of this paper is to outline the main results for three types of matrix: cement and derived forms, organic polymers and bitumens. The results include data on diffusion coefficients, leach rates and waste form volume changes and mass losses. They constitute a considerable advance in knowledge of confinement properties but bring to light the need for further study of radionuclide release mechanisms for the purpose of constructing long-term models of waste form behaviour in the presence of water

Liquid secondary waste. Waste form formulation and qualification

Energy Technology Data Exchange (ETDEWEB)

Cozzi, A. D. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Dixon, K. L. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Hill, K. A. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); King, W. D. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Nichols, R. L. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

2016-03-01

The Hanford Site Effluent Treatment Facility (ETF) currently treats aqueous waste streams generated during Site cleanup activities. When the Hanford Tank Waste Treatment and Immobilization Plant (WTP) begins operations, a liquid secondary waste (LSW) stream from the WTP will need to be treated. The volume of effluent for treatment at the ETF will increase significantly. Washington River Protection Solutions is implementing a Secondary Liquid Waste Immobilization Technology Development Plan to address the technology needs for a waste form and solidification process to treat the increased volume of waste planned for disposal at the Integrated Disposal Facility IDF). Waste form testing to support this plan is composed of work in the near term to demonstrate the waste form will provide data as input to a performance assessment (PA) for Hanford’s IDF.

Evaluation of E2 form factor = 24Mg

International Nuclear Information System (INIS)

Marinelli, J.R.; Moreira, J.R.

1988-11-01

Longitudinal and transverse electron scattering form factors for the 2 + state at 1.37 Mev of the 24 Mg nucleus was evaluated with rotational model wavefunctions. Four different approaches were used for the transverse E2 form factor: PHF, cranking model, ridig rotor and irrotational flow. For the nuclear intrinsic wavefunction, the Nilsson model was assumed in all approaches yielding the calculation of the form factor in PWBA and DWBA. The results are discussed and compared with a recent measurement performed with 180 0 electron scattered from this state. The DWBA calculation, taking into account first order corrections shows that PHF and irrotational flow models give the best agreements with the available data and compete in quality with more complex calculation performed under the 'shell model' approach. (author) [pt

Paramagnetic form factors from itinerant electron theory

International Nuclear Information System (INIS)

Cooke, J.F.; Liu, S.H.; Liu, A.J.

1985-01-01

Elastic neutron scattering experiments performed over the past two decades have provided accurate information about the magnetic form factors of paramagnetic transition metals. These measurements have traditionally been analyzed in terms of an atomic-like theory. There are, however, some cases where this procedure does not work, and there remains the overall conceptual problem of using an atomistic theory for systems where the unpaired-spin electrons are itinerant. We have recently developed computer codes for efficiently evaluating the induced magnetic form factors of fcc and bcc itinerant electron paramagnets. Results for the orbital and spin contributions have been obtained for Cr, Nb, V, Mo, Pd, and Rh based on local density bands. By using calculated spin enhancement parameters, we find reasonable agreement between theory and neutron form factor data. In addition, these zero parameter calculations yield predictions for the bulk susceptibility on an absolute scale which are in reasonable agreement with experiment in all treated cases except palladium

Transuranic waste management program waste form development

International Nuclear Information System (INIS)

Bennett, W.S.; Crisler, L.R.

1981-01-01

To ensure that all technology necessary for long term management of transuranic (TRU) wastes is available, the Department of Energy has established the Transuranic Waste Management Program. A principal focus of the program is development of waste forms that can accommodate the very diverse TRU waste inventory and meet geologic isolation criteria. The TRU Program is following two approaches. First, decontamination processes are being developed to allow removal of sufficient surface contamination to permit management of some of the waste as low level waste. The other approach is to develop processes which will allow immobilization by encapsulation of the solids or incorporate head end processes which will make the solids compatible with more typical waste form processes. The assessment of available data indicates that dewatered concretes, synthetic basalts, and borosilicate glass waste forms appear to be viable candidates for immobilization of large fractions of the TRU waste inventory in a geologic repository

SDMS: A scientific data management system

Science.gov (United States)

Massena, W. A.

1978-01-01

SDMS is a data base management system developed specifically to support scientific programming applications. It consists of a data definition program to define the forms of data bases, and FORTRAN-compatible subroutine calls to create and access data within them. Each SDMS data base contains one or more data sets. A data set has the form of a relation. Each column of a data set is defined to be either a key or data element. Key elements must be scalar. Data elements may also be vectors or matrices. The data elements in each row of the relation form an element set. SDMS permits direct storage and retrieval of an element set by specifying the corresponding key element values. To support the scientific environment, SDMS allows the dynamic creation of data bases via subroutine calls. It also allows intermediate or scratch data to be stored in temporary data bases which vanish at job end.

BLOB IMAGE UNTUK MENAMPILKAN FOTO PADA FORM PENDATAAN PEGAWAI MENGGUNAKAN BAHASA JAVA

Directory of Open Access Journals (Sweden)

- Suharnawi

2012-10-01

Full Text Available Foto merupakan kebutuhan pendataan yang mempunyai banyak manfaat. Pendataan sekarang ini bukanlah hanya berbentuk huruf dan angka saja. Penyimpanan data sudah banyak mengaplikasikan gambar, seperti pendataan foto retina dan foto wajah. Dengan tambahan informasi seperti tersebut maka akurasi data akan semakin lebih baik.Dalam pemrogram java pendataan ini dapat dilakukan dengan fasilitas GUI yang dapat digunakan dari kelompok perintah AWT (Abstract Window Toolkit ataupun Swing. Pada prinsipnya java mempunyai tampilan yang cukup bagus untuk kebutuhan pembuatatan aplikasi. Pada pembahasan ini pengelolaan foto yang ditampilkan pada form pegawai menggunakan Blob Image. Kata kunci :Blob, Foto, Form, Data.

78 FR 6327 - Agency Forms Undergoing Paperwork Reduction Act Review

Science.gov (United States)

2013-01-30

... of illness and disability of the population of the United States. This three-year clearance request... submitting inpatient level data in the form of electronic Uniform Bill (UB-04) administrative claims data as... include universities, research organizations, many in the private sector, foundations, and a variety of...

Micro metal forming

CERN Document Server

2013-01-01

Micro Metal Forming, i. e. forming of parts and features with dimensions below 1 mm, is a young area of research in the wide field of metal forming technologies, expanding the limits for applying metal forming towards micro technology. The essential challenges arise from the reduced geometrical size and the increased lot size. In order to enable potential users to apply micro metal forming in production, information about the following topics are given: tribological behavior: friction between tool and work piece as well as tool wear mechanical behavior: strength and formability of the work piece material, durability of the work pieces size effects: basic description of effects occurring due to the fact, that the quantitative relation between different features changes with decreasing size process windows and limits for forming processes tool making methods numerical modeling of processes and process chains quality assurance and metrology All topics are discussed with respect to the questions relevant to micro...

SFAP: Scan-Tron Forms Analysis Package for the IBM-PC. User's Guide, Version 2.0.

Science.gov (United States)

Harnisch, Delwyn L.; And Others

The Scan-Tron Forms Analysis Package (SFAP) is a collection of integrated programs that allow an IBM-PC (or compatible) to collect data from a Scan-Tron 1200 forms reader. In addition to the basic data acquisition capability, the SFAP has additional capabilities related to the viewing and formatting of incoming data. When used in combination with…

Generic HTML Form Processor: A versatile PHP script to save web-collected data into a MySQL database.

Science.gov (United States)

Göritz, Anja S; Birnbaum, Michael H

2005-11-01

The customizable PHP script Generic HTML Form Processor is intended to assist researchers and students in quickly setting up surveys and experiments that can be administered via the Web. This script relieves researchers from the burdens of writing new CGI scripts and building databases for each Web study. Generic HTML Form Processor processes any syntactically correct HTML forminput and saves it into a dynamically created open-source database. We describe five modes for usage of the script that allow increasing functionality but require increasing levels of knowledge of PHP and Web servers: The first two modes require no previous knowledge, and the fifth requires PHP programming expertise. Use of Generic HTML Form Processor is free for academic purposes, and its Web address is www.goeritz.net/brmic.

Numerical simulation of X90 UOE pipe forming process

Science.gov (United States)

Zou, Tianxia; Ren, Qiang; Peng, Yinghong; Li, Dayong; Tang, Ding; Han, Jianzeng; Li, Xinwen; Wang, Xiaoxiu

2013-12-01

The UOE process is an important technique to manufacture large-diameter welding pipes which are increasingly applied in oil pipelines and offshore platforms. The forming process of UOE mainly consists of five successive operations: crimping, U-forming, O-forming, welding and mechanical expansion, through which a blank is formed into a pipe in a UOE pipe mill. The blank with an appropriate edge bevel is bent into a cylindrical shape by crimping (C-forming), U-forming and O-forming successively. After the O-forming, there is an open-seam between two ends of the plate. Then, the blank is welded by automatic four-electrode submerged arc welding technique. Subsequently, the welded pipe is expanded with a mechanical expander to get a high precision circular shape. The multiple operations in the UOE mill make it difficult to control the quality of the formed pipe. Therefore, process design mainly relies on experience in practical production. In this study, the UOE forming of an API X90 pipe is studied by using finite element simulation. The mechanical properties tests are performed on the API X90 pipeline steel blank. A two-dimensional finite element model under the hypothesis of plane strain condition is developed to simulate the UOE process according to data coming from the workshop. A kinematic hardening model is used in the simulation to take the Bauschinger effect into account. The deformation characteristics of the blank during the forming processes are analyzed. The simulation results show a significant coherence in the geometric configurations comparing with the practical manufacturing.

Severe forms of food allergy

Directory of Open Access Journals (Sweden)

Emanuel Sarinho

Full Text Available Abstract Objectives: To guide the diagnostic and therapeutic management of severe forms of food allergy. Data sources: Search in the Medline database using the terms “severe food allergy,” “anaphylaxis and food allergy,” “generalized urticaria and food allergy,” and “food protein-induced enterocolitis syndrome” in the last ten years, searching in the title, abstract, or keyword fields. Summary of data: Food allergy can be serious and life-threatening. Milk, eggs, peanuts, nuts, walnuts, wheat, sesame seeds, shrimp, fish, and fruit can precipitate allergic emergencies. The severity of reactions will depend on associated cofactors such as age, drug use at the onset of the reaction, history and persistence of asthma and/or severe allergic rhinitis, history of previous anaphylaxis, exercise, and associated diseases. For generalized urticaria and anaphylaxis, intramuscular epinephrine is the first and fundamental treatment line. For the treatment in acute phase of food-induced enterocolitis syndrome in the emergency setting, prompt hydroelectrolytic replacement, administration of methylprednisolone and ondansetron IV are necessary. It is important to recommend to the patient with food allergy to maintain the exclusion diet, seek specialized follow-up and, in those who have anaphylaxis, to emphasize the need to carry epinephrine. Conclusion: Severe food allergy may occur in the form of anaphylaxis and food-protein-induced enterocolitis syndrome, which are increasingly observed in the pediatric emergency room; hence, pediatricians must be alert so they can provide the immediate diagnosis and treatment.

Meson Transition Form Factors in Light-Front Holographic QCD

Energy Technology Data Exchange (ETDEWEB)

Brodsky, Stanley J.; /SLAC; Cao, Fu-Guang; /Massey U.; de Teramond, Guy F.; /Costa Rica U.

2011-06-22

We study the photon-to-meson transition form factors (TFFs) F{sub M{gamma}}(Q{sup 2}) for {gamma}{gamma}* {yields} M using light-front holographic methods. The Chern-Simons action, which is a natural form in 5-dimensional anti-de Sitter (AdS) space, leads directly to an expression for the photon-to-pion TFF for a class of confining models. Remarkably, the predicted pion TFF is identical to the leading order QCD result where the distribution amplitude has asymptotic form. The Chern-Simons form is local in AdS space and is thus somewhat limited in its predictability. It only retains the q{bar q} component of the pion wavefunction, and further, it projects out only the asymptotic form of the meson distribution amplitude. It is found that in order to describe simultaneously the decay process {pi}{sup 0} {yields} {gamma}{gamma} and the pion TFF at the asymptotic limit, a probability for the q{bar q} component of the pion wavefunction P{sub q{bar q}} = 0.5 is required; thus giving indication that the contributions from higher Fock states in the pion light-front wavefunction need to be included in the analysis. The probability for the Fock state containing four quarks (anti-quarks) which follows from analyzing the hadron matrix elements, P{sub q{bar q}q{bar q}} {approx} 10%, agrees with the analysis of the pion elastic form factor using light-front holography including higher Fock components in the pion wavefunction. The results for the TFFs for the {eta} and {eta}{prime} mesons are also presented. The rapid growth of the pion TFF exhibited by the BABAR data at high Q{sup 2} is not compatible with the models discussed in this article, whereas the theoretical calculations are in agreement with the experimental data for the {eta} and {eta}{prime} TFFs.

Light extinction method for diagnostics of particles sizes formed in magnetic field

Science.gov (United States)

Myshkin, Vyacheslav; Izhoykin, Dmitry; Grigoriev, Alexander; Gamov, Denis; Leonteva, Daria

2018-03-01

The results of laser diagnostics of dispersed particles formed upon cooling of Zn vapor are presented. The radiation attenuation in the wavelength range 420-630 nm with a step of 0.3 nm was registered. The attenuation coefficients spectral dependence was processed using known algorithms for integral equation solving. The 10 groups of 8 attenuation coefficients were formed. Each group was processed taking with considering of previous decisions. After processing of the 10th group of data, calculations were repeated from the first one. Data of the particles sizes formed in a magnetic field of 0, 44 and 76 mT are given. A model of physical processes in a magnetic field is discussed.

Combined Waste Form Cost Trade Study

International Nuclear Information System (INIS)

Gombert, Dirk; Piet, Steve; Trickel, Timothy; Carter, Joe; Vienna, John; Ebert, Bill; Matthern, Gretchen

2008-01-01

A new generation of aqueous nuclear fuel reprocessing, now in development under the auspices of the DOE Office of Nuclear Energy (NE), separates fuel into several fractions, thereby partitioning the wastes into groups of common chemistry. This technology advance enables development of waste management strategies that were not conceivable with simple PUREX reprocessing. Conventional wisdom suggests minimizing high level waste (HLW) volume is desirable, but logical extrapolation of this concept suggests that at some point the cost of reducing volume further will reach a point of diminishing return and may cease to be cost-effective. This report summarizes an evaluation considering three groupings of wastes in terms of cost-benefit for the reprocessing system. Internationally, the typical waste form for HLW from the PUREX process is borosilicate glass containing waste elements as oxides. Unfortunately several fission products (primarily Mo and the noble metals Ru, Rh, Pd) have limited solubility in glass, yielding relatively low waste loading, producing more glass, and greater disposal costs. Advanced separations allow matching the waste form to waste stream chemistry, allowing the disposal system to achieve more optimum waste loading with improved performance. Metals can be segregated from oxides and each can be stabilized in forms to minimize the HLW volume for repository disposal. Thus, a more efficient waste management system making the most effective use of advanced waste forms and disposal design for each waste is enabled by advanced separations and how the waste streams are combined. This trade-study was designed to juxtapose a combined waste form baseline waste treatment scheme with two options and to evaluate the cost-benefit using available data from the conceptual design studies supported by DOE-NE

Phase transitions of antibiotic clarithromycin forms I, IV and new form VII crystals.

Science.gov (United States)

Ito, Masataka; Shiba, Rika; Watanabe, Miteki; Iwao, Yasunori; Itai, Shigeru; Noguchi, Shuji

2018-06-01

Metastable crystal form I of the antibiotic clarithromycin has a pharmaceutically valuable characteristic that its crystalline phase transition can be applied for its sustained release from tablets. The phase transition of form I was investigated in detail by single crystal and powder X-ray analyses, dynamic vapor sorption analysis and thermal analysis. The single crystal structure of form I revealed that form I was not an anhydrate crystal but contained a partially occupied water molecule in the channel-like void space. Dynamic vapor sorption (DVS) analysis demonstrated that form I crystals reversibly sorbed water molecules in two steps when the relative humidity (RH) increased and finally transited to hydrate form IV at 95% RH. DVS analysis also showed that when the RH decreased form IV crystals lost water molecules at 40% RH and transited to the newly identified anhydrate crystal form VII. Form VII reversibly transited to form IV at lower RH than form I, suggesting that form I is more suitable for manufacturing a sustained-release tablet of CAM utilizing the crystalline phase transition. Copyright © 2018 Elsevier B.V. All rights reserved.

Towards a Resolution of the Proton Form Factor Problem: New Electron and Positron Scattering Data

Science.gov (United States)

Adikaram, D.; Rimal, D.; Weinstein, L. B.; Raue, B.; Khetarpal, P.; Bennett, R. P.; Arrington, J.; Brooks, W. K.; Adhikari, K. P.; Afanasev, A. V.; Amaryan, M. J.; Anderson, M. D.; Anefalos Pereira, S.; Avakian, H.; Ball, J.; Battaglieri, M.; Bedlinskiy, I.; Biselli, A. S.; Bono, J.; Boiarinov, S.; Briscoe, W. J.; Burkert, V. D.; Carman, D. S.; Careccia, S.; Celentano, A.; Chandavar, S.; Charles, G.; Colaneri, L.; Cole, P. L.; Contalbrigo, M.; Crede, V.; D'Angelo, A.; Dashyan, N.; De Vita, R.; De Sanctis, E.; Deur, A.; Djalali, C.; Dodge, G. E.; Dupre, R.; Egiyan, H.; El Alaoui, A.; El Fassi, L.; Elouadrhiri, L.; Eugenio, P.; Fedotov, G.; Fegan, S.; Filippi, A.; Fleming, J. A.; Fradi, A.; Garillon, B.; Gilfoyle, G. P.; Giovanetti, K. L.; Girod, F. X.; Goetz, J. T.; Gohn, W.; Golovatch, E.; Gothe, R. W.; Griffioen, K. A.; Guegan, B.; Guidal, M.; Guo, L.; Hafidi, K.; Hakobyan, H.; Hanretty, C.; Harrison, N.; Hattawy, M.; Hicks, K.; Holtrop, M.; Hughes, S. M.; Hyde, C. E.; Ilieva, Y.; Ireland, D. G.; Ishkhanov, B. S.; Jenkins, D.; Jiang, H.; Jo, H. S.; Joo, K.; Joosten, S.; Kalantarians, N.; Keller, D.; Khandaker, M.; Kim, A.; Kim, W.; Klein, A.; Klein, F. J.; Koirala, S.; Kubarovsky, V.; Kuhn, S. E.; Livingston, K.; Lu, H. Y.; MacGregor, I. J. D.; Markov, N.; Mattione, P.; Mayer, M.; McKinnon, B.; Mestayer, M. D.; Meyer, C. A.; Mirazita, M.; Mokeev, V.; Montgomery, R. A.; Moody, C. I.; Moutarde, H.; Movsisyan, A.; Camacho, C. Munoz; Nadel-Turonski, P.; Niccolai, S.; Niculescu, G.; Osipenko, M.; Ostrovidov, A. I.; Park, K.; Pasyuk, E.; Peña, C.; Pisano, S.; Pogorelko, O.; Price, J. W.; Procureur, S.; Prok, Y.; Protopopescu, D.; Puckett, A. J. R.; Ripani, M.; Rizzo, A.; Rosner, G.; Rossi, P.; Roy, P.; Sabatié, F.; Salgado, C.; Schott, D.; Schumacher, R. A.; Seder, E.; Sharabian, Y. G.; Simonyan, A.; Skorodumina, I.; Smith, E. S.; Smith, G. D.; Sober, D. I.; Sokhan, D.; Sparveris, N.; Stepanyan, S.; Stoler, P.; Strauch, S.; Sytnik, V.; Taiuti, M.; Tian, Ye; Trivedi, A.; Ungaro, M.; Voskanyan, H.; Voutier, E.; Walford, N. K.; Watts, D. P.; Wei, X.; Wood, M. H.; Zachariou, N.; Zana, L.; Zhang, J.; Zhao, Z. W.; Zonta, I.; CLAS Collaboration

2015-02-01

There is a significant discrepancy between the values of the proton electric form factor, GEp, extracted using unpolarized and polarized electron scattering. Calculations predict that small two-photon exchange (TPE) contributions can significantly affect the extraction of GEp from the unpolarized electron-proton cross sections. We determined the TPE contribution by measuring the ratio of positron-proton to electron-proton elastic scattering cross sections using a simultaneous, tertiary electron-positron beam incident on a liquid hydrogen target and detecting the scattered particles in the Jefferson Lab CLAS detector. This novel technique allowed us to cover a wide range in virtual photon polarization (ɛ ) and momentum transfer (Q2) simultaneously, as well as to cancel luminosity-related systematic errors. The cross section ratio increases with decreasing ɛ at Q2=1.45 GeV2 . This measurement is consistent with the size of the form factor discrepancy at Q2≈1.75 GeV2 and with hadronic calculations including nucleon and Δ intermediate states, which have been shown to resolve the discrepancy up to 2 - 3 GeV2 .

Conjoint Forming - Technologies for Simultaneous Forming and Joining

International Nuclear Information System (INIS)

Groche, P; Wohletz, S; Mann, A; Krech, M; Monnerjahn, V

2016-01-01

The market demand for new products optimized for e. g. lightweight applications or smart components leads to new challenges in production engineering. Hybrid structures represent one promising approach. They aim at higher product performance by using a suitable combination of different materials. The developments of hybrid structures stimulate the research on joining of dissimilar materials. Since they allow for joining dissimilar materials without external heating technologies based on joining by plastic deformation seem to be of special attractiveness. The paper at hand discusses the conjoint forming approach. This approach combines forming and joining in one process. Two or more workpieces are joined while at least one workpiece is plastically deformed. After presenting the fundamental joining mechanisms, the conjoint forming approach is discussed comprehensively. Examples of conjoint processes demonstrate the effectiveness and reveal the underlying phenomena. (paper)

Evaluation of Data Management Systems for Geospatial Big Data

OpenAIRE

Amirian, Pouria; Basiri, Anahid; Winstanley, Adam C.

2014-01-01

Big Data encompasses collection, management, processing and analysis of the huge amount of data that varies in types and changes with high frequency. Often data component of Big Data has a positional component as an important part of it in various forms, such as postal address, Internet Protocol (IP) address and geographical location. If the positional components in Big Data extensively used in storage, retrieval, analysis, processing, visualization and knowledge discovery (geospatial Big Dat...

Literature review of acid forming emissions in livestock

International Nuclear Information System (INIS)

Prior, M.G.; Lopez, A.

1992-01-01

A review is presented of the effects of acid forming emissions such as sulfur and nitrogen oxides in livestock. Topics discussed include uptake of airborne pollutants, types of acid-forming pollutants, sources of sulfur-containing emissions, sour gas, and farm animal toxicity caused by carbon disulfide, carbonyl sulfide, ethyl sulfide, methyl sulfide, hydrogen sulfide, methylmercaptan, ethylmercaptan, propylmercaptan, nitrogen oxides, ozone, sulfur, and sulfur dioxide. A review is presented of field data including effects of emissions from gas plants, gas well blowouts, animal nutrition in west central Alberta, and experimental studies on goats and cows. 96 refs., 10 tabs

New Form of Hypertonic Solution for Nebulization Therapy

Directory of Open Access Journals (Sweden)

Olga I. Simonova

2016-01-01

Full Text Available Mucolytic, expectorative and antitussive drugs are traditionally used in acute or chronic respiratory episodes affected by acute respiratory infections. Today, preference is given to drugs in a form of solutions for nebulization therapy. The article presents data on the new dosage form of 7% inhalation hypertonic solution in combination with hyaluronic acid used in mucostasis therapy for chronic respiratory diseases. The information on the properties and the favorable effect of hyaluronic acid is provided. We discuss the evidence base of inhalation of the hypertonic solution in combination with hyaluronic acid in cystic fibrosis.

Measurement of the Charged Pion Electromagnetic Form Factor

International Nuclear Information System (INIS)

J. Volmer; David Abbott; H. Anklin; Chris Armstrong; John Arrington; K. Assamagan; Steven Avery; Oliver K. Baker; Henk Blok; C. Bochna; Ed Brash; Herbert Breuer; Nicholas Chant; Jim Dunne; Tom Eden; Rolf Ent; David Gaskell; Ron Gilman; Kenneth Gustafsson; Wendy Hinton; Garth Huber; Hal Jackson; Mark K. Jones; Cynthia Keppel; P.H. Kim; Wooyoung Kim; Andi Klein; Doug Koltenuk; Meme Liang; George Lolos; Allison Lung; David Mack; D. McKee; David Meekins; Joseph Mitchell; H. Mkrtchian; B. Mueller; Gabriel Niculescu; Ioana Niculescu; D. Pitz; D. Potterveld; Liming Qin; Juerg Reinhold; I.K. Shin; Stepan Stepanyan; V. Tadevosian; L.G. Tang; R.L.J. van der Meer; K. Vansyoc; D. Van Westrum; Bill Vulcan; Stephen Wood; Chen Yan; W.X. Zhao; Beni Zihlmann

2001-01-01

Separated longitudinal and transverse structure functions for the reaction 1H(e,eprime pi+)n were measured in the momentum transfer region Q2=0.6-1.6 (GeV/c)**2 at a value of the invariant mass W=1.95 GeV. New values for the pion charge form factor were extracted from the longitudinal cross section by using a recently developed Regge model. The results indicate that the pion form factor in this region is larger than previously assumed and is consistent with a monopole parameterization fitted to very low Q2 elastic data

Results after ten years of field testing low-level radioactive waste forms using lysimeters

International Nuclear Information System (INIS)

McConnell, J.W. Jr.; Rogers, R.D.; Jastrow, J.D.; Sanford, W.E.; Larsen, I.L.; Sullivan, T.M.

1995-01-01

The Field Lysimeter Investigations: Low-Level Waste Data Base Development Program is obtaining information on the performance of radioactive waste forms. Ion-exchange resins from a commercial nuclear power station were solidified into waste forms using portland cement and vinyl esterstyrene. These waste forms are being tested to: (a) obtain information on performance of waste forms in typical disposal environments, (b) compare field results with bench leach studies, (c) develop a low-level waste data base for use in performance assessment source term calculations, and (d) apply the DUST computer code to compare predicted cumulative release to actual field data. The program, funded by the Nuclear Regulatory Commission (NRC), includes observed radionuclide releases from waste forms in field lysimeters. The purpose of this paper is to present the experimental results of two lysimeter arrays over 10 years of operation, and to compare those results to bench test results and to DUST code predicted releases. Further analysis of soil cores taken to define the observed upward migration of radionuclides in one lysimeter is also presented

Differential forms orthogonal to holomorphic functions or forms, and their properties

CERN Document Server

Aizenberg, L A

1983-01-01

The authors consider the problem of characterizing the exterior differential forms which are orthogonal to holomorphic functions (or forms) in a domain D\\subset {\\mathbf C}^n with respect to integration over the boundary, and some related questions. They give a detailed account of the derivation of the Bochner-Martinelli-Koppelman integral representation of exterior differential forms, which was obtained in 1967 and has already found many important applications. They study the properties of \\overline \\partial-closed forms of type (p, n - 1), 0\\leq p\\leq n - 1, which turn out to be the duals (with respect to the orthogonality mentioned above) to holomorphic functions (or forms) in several complex variables, and resemble holomorphic functions of one complex variable in their properties.

Integration of adaptive process control with computational simulation for spin-forming

International Nuclear Information System (INIS)

Raboin, P. J. LLNL

1998-01-01

Improvements in spin-forming capabilities through upgrades to a metrology and machine control system and advances in numerical simulation techniques were studied in a two year project funded by Laboratory Directed Research and Development (LDRD) at Lawrence Livermore National Laboratory. Numerical analyses were benchmarked with spin-forming experiments and computational speeds increased sufficiently to now permit actual part forming simulations. Extensive modeling activities examined the simulation speeds and capabilities of several metal forming computer codes for modeling flat plate and cylindrical spin-forming geometries. Shape memory research created the first numerical model to describe this highly unusual deformation behavior in Uranium alloys. A spin-forming metrology assessment led to sensor and data acquisition improvements that will facilitate future process accuracy enhancements, such as a metrology frame. Finally, software improvements (SmartCAM) to the manufacturing process numerically integrate the part models to the spin-forming process and to computational simulations

Chiral analysis of baryon form factors

Energy Technology Data Exchange (ETDEWEB)

Gail, T.A.

2007-11-08

This work presents an extensive theoretical investigation of the structure of the nucleon within the standard model of elementary particle physics. In particular, the long range contributions to a number of various form factors parametrizing the interactions of the nucleon with an electromagnetic probe are calculated. The theoretical framework for those calculations is chiral perturbation theory, the exact low energy limit of Quantum Chromo Dynamics, which describes such long range contributions in terms of a pion-cloud. In this theory, a nonrelativistic leading one loop order calculation of the form factors parametrizing the vector transition of a nucleon to its lowest lying resonance, the {delta}, a covariant calculation of the isovector and isoscalar vector form factors of the nucleon at next to leading one loop order and a covariant calculation of the isoscalar and isovector generalized vector form factors of the nucleon at leading one loop order are performed. In order to perform consistent loop calculations in the covariant formulation of chiral perturbation theory an appropriate renormalization scheme is defined in this work. All theoretical predictions are compared to phenomenology and results from lattice QCD simulations. These comparisons allow for a determination of the low energy constants of the theory. Furthermore, the possibility of chiral extrapolation, i.e. the extrapolation of lattice data from simulations at large pion masses down to the small physical pion mass is studied in detail. Statistical as well as systematic uncertainties are estimated for all results throughout this work. (orig.)

Normative data and discriminative properties of short form 36 (SF-36 in Turkish urban population

Directory of Open Access Journals (Sweden)

Akvardar Yildiz

2006-10-01

Full Text Available Abstract Background SF-36 has been both translated into different languages and adapted to different cultures to obtain comparable data on health status internationally. However there have been only a limited number of studies focused on the discriminative ability of SF-36 regarding social and disease status in developing countries. The aim of this study was to obtain population norms of the short form 36 (SF-36 health survey and the association of SF-36 domains with demographic and socioeconomic variables in an urban population in Turkey. Methods A cross-sectional study. Face to face interviews were carried out with a sample of households. The sample was systematically selected from two urban Health Districts in Izmir, Turkey. The study group consisted of 1,279 people selected from a study population of 46,290 people aged 18 and over. Results Internal consistencies of the scales were high, with the exception of mental health and vitality. Physical health scales were associated with both age and gender. On the other hand, mental health scales were less strongly associated with age and gender. Women reported poorer health compared to men in general. Social risk factors (employment status, lower education and economic strain were associated with worse health profiles. The SF-36 was found to be capable of discriminating disease status. Conclusion Our findings, cautiously generalisable to urban population, suggest that the SF-36 can be a valuable tool for studies on health outcomes in Turkish population. SF-36 may also be a promising measure for research on health inequalities in Turkey and other developing countries.

Special waste form lysimeters-arid. Annual report, 1985

International Nuclear Information System (INIS)

Walter, M.B.; Graham, M.J.

1985-09-01

The Special Waste Form Lysimeters-Arid program was initiated to determine typical source terms generated by commercial solidified low-level nuclear waste in an arid climate. Waste-form leaching tests are being conducted at a field facility at the Hanford site near Richland, Washington. A similar program is being conducted at a humid site. The field facility consists of 10 lysimeters placed around a central instrument caisson. The waste samples from boiling water and pressurized water reactors were emplaced in 1984, and the lysimeters are being monitored for movement of contaminants and water. Solidifying agents being tested include vinyl ester-styrene, bitumen, and cement. Laboratory leaching and geochemical modeling studies are being conducted to predict expected leach rates at the field site and to aid field-data interpretation. Small samples of the solidified waste forms were made for use in the laboratory leaching studies that include standard leach tests and leaching of solidified waste forms in soil columns. Complete chemical and radionuclide analyses are being conducted on the solid and liquid portions of the wastes. 2 refs

Special Waste Form Lysimeters-Arid: annual report 1985

International Nuclear Information System (INIS)

Walter, M.B.; Graham, M.J.

1986-01-01

The Special Waste Form Lysimeters-Arid program was initiated to determine typical source terms generated by commercial solidified low-level nuclear waste in an arid climate. Waste-form leaching tests are being conducted at a field facility at the Hanford site near Richland, Washington. A similar program is being conducted at a humid site. The field facility consists of 10 lysimeters placed around a central instrument caisson. The waste samples from boiling water and pressurized water reactors were emplaced in 1984, and the lysimeters are being monitored for movement of contaminants and water. Solidifying agents being tested include vinyl ester-styrene, bitumen, and cement. Laboratory leaching and geochemical modeling studies are being conducted to predict expected leach rates at the field site and to aid field-data interpretation. Small samples of the solidified waste forms were made for use in the laboratory leaching studies that include standard leach tests and leaching of solidified waste forms in soil columns. Complete chemical and radionuclide analyses are being conducted on the solid and liquid portions of the wastes

Updated Liquid Secondary Waste Grout Formulation and Preliminary Waste Form Qualification

Energy Technology Data Exchange (ETDEWEB)

Saslow, Sarah A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Um, Wooyong [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Russell, Renee L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wang, Guohui [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Asmussen, Robert M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sahajpal, Rahul [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2017-07-01

This report describes the results from liquid secondary waste grout (LSWG) formulation and cementitious waste form qualification tests performed by Pacific Northwest National Laboratory (PNNL) for Washington River Protection Solutions, LLC (WRPS). New formulations for preparing a cementitious waste form from a high-sulfate liquid secondary waste stream simulant, developed for Effluent Management Facility (EMF) process condensates merged with low activity waste (LAW) caustic scrubber, and the release of key constituents (e.g. ⁹⁹Tc and ¹²⁹I) from these monoliths were evaluated. This work supports a technology development program to address the technology needs for Hanford Site Effluent Treatment Facility (ETF) liquid secondary waste (LSW) solidification and supports future Direct Feed Low-Activity Waste (DFLAW) operations. High-priority activities included simulant development, LSWG formulation, and waste form qualification. The work contained within this report relates to waste form development and testing and does not directly support the 2017 integrated disposal facility (IDF) performance assessment (PA). However, this work contains valuable information for use in PA maintenance past FY17, and for future waste form development efforts. The provided data should be used by (i) cementitious waste form scientists to further understanding of cementitious dissolution behavior, (ii) IDF PA modelers who use quantified constituent leachability, effective diffusivity, and partitioning coefficients to advance PA modeling efforts, and (iii) the U.S. Department of Energy (DOE) contractors and decision makers as they assess the IDF PA program. The results obtained help fill existing data gaps, support final selection of a LSWG waste form, and improve the technical defensibility of long-term waste form performance estimates.

Solid-state NMR studies of form I of atorvastatin calcium.

Science.gov (United States)

Wang, Wei David; Gao, Xudong; Strohmeier, Mark; Wang, Wei; Bai, Shi; Dybowski, Cecil

2012-03-22

Solid-state (13)C, (19)F, and (15)N magic angle spinning NMR studies of Form I of atorvastatin calcium are reported, including chemical shift tensors of all resolvable carbon sites and fluorine sites. The complete (13)C and (19)F chemical shift assignments are given based on an extensive analysis of (13)C-(1)H HETCOR and (13)C-(19)F HETCOR results. The solid-state NMR data indicate that the asymmetric unit of this material contains two atorvastatin molecules. A possible structure of Form I of atorvastatin calcium (ATC-I), derived from solid-state NMR data and density functional theory calculations of various structures, is proposed for this important active pharmaceutical ingredient (API).

Form factors of ηc in light-front quark model

International Nuclear Information System (INIS)

Geng, Chao-Qiang; Lih, Chong-Chung

2013-01-01

We study the form factors of the η c meson in the light-front quark model. We explicitly show that the transition form factor of η c → γ * γ as a function of the momentum transfer is consistent with the experimental data by the BaBar collaboration, while the decay constant of η c is found to be f η c = 230.5 +52.2 -61.0 and 303.6 +115.2 -116.4 MeV for η c ∝ c anti c by using two η c → γγ decay widths of 5.3 ± 0.5 and 7.2 ± 2.1 keV, given by Particle Data Group and Lattice QCD calculation, respectively. (orig.)

Detection of defects in formed sheet metal using medial axis transformation

Science.gov (United States)

Murmu, Naresh C.; Velgan, Roman

2003-05-01

In the metal forming processes, the sheet metals are often prone to various defects such as thinning, dents, wrinkles etc. In the present manufacturing environments with ever increasing demand of higher quality, detecting the defects of formed sheet metal using an effective and objective inspection system is the foremost norm to remain competitive in market. The defect detection using optical techniques aspire to satisfy its needs to be non-contact and fast. However, the main difficulties to achieve this goal remain essentially on the development of efficient evaluation technique and accurate interpretation of extracted data. The defect like thinning is detected by evaluating the deviations of the thickness in the formed sheet metal against its nominal value. The present evaluation procedure for determination of thickness applied on the measurements data is not without deficiency. To improve this procedure, a new evaluation approach based on medial axis transformation is proposed here. The formed sheet metals are digitized using fringe projection systems in different orientations, and afterwards registered into one coordinate frame. The medial axis transformation (MAT) is applied on the point clouds, generating the point clouds of MAT. This data is further processed and medial surface is determined. The thinning defect is detected by evaluating local wall thickness and other defects like wrinkles are determined using the shape recognition on the medial surface. The applied algorithm is simple, fast and robust.

YOUNG STELLAR OBJECTS IN THE MASSIVE STAR-FORMING REGION W49

Energy Technology Data Exchange (ETDEWEB)

Saral, G.; Hora, J. L.; Willis, S. E. [Harvard-Smithsonian Center for Astrophysics, 60 Garden Street, Cambridge, MA 02138 (United States); Koenig, X. P. [Yale University, Department of Astronomy, 208101, New Haven, CT 06520-8101 (United States); Gutermuth, R. A. [University of Massachusetts, Department of Astronomy, Amherst, MA 01003 (United States); Saygac, A. T., E-mail: gsaral@cfa.harvard.edu [Istanbul University, Faculty of Science, Astronomy and Space Sciences Department, Istanbul-Turkey (Turkey)

2015-11-01

We present the initial results of our investigation of the star-forming complex W49, one of the youngest and most luminous massive star-forming regions in our Galaxy. We used Spitzer/Infrared Array Camera (IRAC) data to investigate massive star formation with the primary objective of locating a representative set of protostars and the clusters of young stars that are forming around them. We present our source catalog with the mosaics from the IRAC data. In this study we used a combination of IRAC, MIPS, Two Micron All Sky Survey, and UKIRT Deep Infrared Sky Survey (UKIDSS) data to identify and classify the young stellar objects (YSOs). We identified 232 Class 0/I YSOs, 907 Class II YSOs, and 74 transition disk candidate objects using color–color and color–magnitude diagrams. In addition, to understand the evolution of star formation in W49, we analyzed the distribution of YSOs in the region to identify clusters using a minimal spanning tree method. The fraction of YSOs that belong to clusters with ≥7 members is found to be 52% for a cutoff distance of 96″, and the ratio of Class II/I objects is 2.1. We compared the W49 region to the G305 and G333 star-forming regions and concluded that W49 has the richest population, with seven subclusters of YSOs.

Development of standard testing methods for nuclear-waste forms

International Nuclear Information System (INIS)

Mendel, J.E.; Nelson, R.D.

1981-11-01

Standard test methods for waste package component development and design, safety analyses, and licensing are being developed for the Nuclear Waste Materials Handbook. This paper describes mainly the testing methods for obtaining waste form materials data

Unified form language

DEFF Research Database (Denmark)

Alnæs, Martin S.; Logg, Anders; Ølgaard, Kristian Breum

2014-01-01

We present the Unied Form Language (UFL), which is a domain-specic language for representing weak formulations of partial dierential equations with a view to numerical approximation. Features of UFL include support for variational forms and functionals, automatic dierentiation of forms and expres...... libraries to generate concrete low-level implementations. Some application examples are presented and libraries that support UFL are highlighted....

Mesonic Form Factors

Energy Technology Data Exchange (ETDEWEB)

Frederic D. R. Bonnet; Robert G. Edwards; George T. Fleming; Randal Lewis; David Richards

2003-07-22

We have started a program to compute the electromagnetic form factors of mesons. We discuss the techniques used to compute the pion form factor and present preliminary results computed with domain wall valence fermions on MILC asqtad lattices, as well as Wilson fermions on quenched lattices. These methods can easily be extended to rho-to-gamma-pi transition form factors.

Informed consent and the readability of the written consent form.

Science.gov (United States)

Sivanadarajah, N; El-Daly, I; Mamarelis, G; Sohail, M Z; Bates, P

2017-11-01

Introduction The aim of this study was to objectively ascertain the level of readability of standardised consent forms for orthopaedic procedures. Methods Standardised consent forms (both in summary and detailed formats) endorsed by the British Orthopaedic Association (BOA) were retrieved from orthoconsent.com and assessed for readability. This involved using an online tool to calculate the validated Flesch reading ease score (FRES). This was compared with the FRES for the National Health Service (NHS) Consent Form 1. Data were analysed and interpreted according to the FRES grading table. Results The FRES for Consent Form 1 was 55.6, relating to the literacy expected of an A level student. The mean FRES for the BOA summary consent forms (n=27) was 63.6 (95% confidence interval [CI]: 61.2-66.0) while for the detailed consent forms (n=32), it was 68.9 (95% CI: 67.7-70.0). All BOA detailed forms scored >60, correlating to the literacy expected of a 13-15-year-old. The detailed forms had a higher FRES than the summary forms (p<0.001). Conclusions This study demonstrates that the BOA endorsed standardised consent forms are much easier to read and understand than the NHS Consent Form 1, with the detailed BOA forms being the easiest to read. Despite this, owing to varying literacy levels, a significant proportion of patients may struggle to give informed consent based on the written information provided to them.

QR encoded smart oral dosage forms by inkjet printing.

Science.gov (United States)

Edinger, Magnus; Bar-Shalom, Daniel; Sandler, Niklas; Rantanen, Jukka; Genina, Natalja

2018-01-30

The use of inkjet printing (IJP) technology enables the flexible manufacturing of personalized medicine with the doses tailored for each patient. In this study we demonstrate, for the first time, the applicability of IJP in the production of edible dosage forms in the pattern of a quick response (QR) code. This printed pattern contains the drug itself and encoded information relevant to the patient and/or healthcare professionals. IJP of the active pharmaceutical ingredient (API)-containing ink in the pattern of QR code was performed onto a newly developed porous and flexible, but mechanically stable substrate with a good absorption capacity. The printing did not affect the mechanical properties of the substrate. The actual drug content of the printed dosage forms was in accordance with the encoded drug content. The QR encoded dosage forms had a good print definition without significant edge bleeding. They were readable by a smartphone even after storage in harsh conditions. This approach of efficient data incorporation and data storage combined with the use of smart devices can lead to safer and more patient-friendly drug products in the future. Copyright © 2017 Elsevier B.V. All rights reserved.

Secondary Waste Cast Stone Waste Form Qualification Testing Plan

Energy Technology Data Exchange (ETDEWEB)

Westsik, Joseph H.; Serne, R. Jeffrey

2012-09-26

The Hanford Tank Waste Treatment and Immobilization Plant (WTP) is being constructed to treat the 56 million gallons of radioactive waste stored in 177 underground tanks at the Hanford Site. The WTP includes a pretreatment facility to separate the wastes into high-level waste (HLW) and low-activity waste (LAW) fractions for vitrification and disposal. The LAW will be converted to glass for final disposal at the Integrated Disposal Facility (IDF). Cast Stone – a cementitious waste form, has been selected for solidification of this secondary waste stream after treatment in the ETF. The secondary-waste Cast Stone waste form must be acceptable for disposal in the IDF. This secondary waste Cast Stone waste form qualification testing plan outlines the testing of the waste form and immobilization process to demonstrate that the Cast Stone waste form can comply with the disposal requirements. Specifications for the secondary-waste Cast Stone waste form have not been established. For this testing plan, Cast Stone specifications are derived from specifications for the immobilized LAW glass in the WTP contract, the waste acceptance criteria for the IDF, and the waste acceptance criteria in the IDF Permit issued by the State of Washington. This testing plan outlines the testing needed to demonstrate that the waste form can comply with these waste form specifications and acceptance criteria. The testing program must also demonstrate that the immobilization process can be controlled to consistently provide an acceptable waste form product. This testing plan also outlines the testing needed to provide the technical basis for understanding the long-term performance of the waste form in the disposal environment. These waste form performance data are needed to support performance assessment analyses of the long-term environmental impact of the secondary-waste Cast Stone waste form in the IDF

Real world evidence: a form of big data, transforming healthcare data into actionable real time insights and informed business decisions

Directory of Open Access Journals (Sweden)

Uttam Kumar Barick

2015-09-01

Full Text Available Data has always played an important role in assisting business decisions and overall improvement of a company’s strategies. The introduction of what has come to be named ‘BIG data’ has changed the industry paradigm altogether for a few domains like media, mobility, retail and social. Data from the real world is also considered as BIG data based on its magnitude, sources and the industry’s capacity to handle the same. Although, the healthcare industry has been using real world data for decades, digitization of health records has demonstrated its value to all the stakeholders with a reaffirmation of interest in it. Over time, companies are looking to adopt new technologies in linking these fragmented data for meaningful and actionable insights to demonstrate their value over competition. It has also been noticed that the consequences of not demonstrating the value of data are sometimes leads regulators and payers to be severe. The real challenge though is not in identifying data sets but transforming these data sets into actionable real time insights and business decisions. Evidence and value development frameworks need to work side by side, harnessing meaningful insights in parallel to product development from early phase to life-cycle management. This should in-turn create evidence and value-based insights for multiple stakeholders across the industry; ultimately supporting the patient as the end user to take informed decisions that impact access to care. This article attempts to review the current state of affairs in the area of BIG data in pharma OR BIG DIP as it is increasingly being referred to.

Tangible data, explorations in data physicalization

DEFF Research Database (Denmark)

Hogan, Trevor; Hornecker, Eva; Stusak, Simon

2016-01-01

Humans have represented data in many forms for thousands of years, yet the main sensory channel we use to perceive these representations today still remains largely exclusive to sight. Recent developments, such as advances in digital fabrication, microcontrollers, actuated tangibles, and shape...

Biomimicry of Palm Tree Leaves Form and Pattern on Building Form

Directory of Open Access Journals (Sweden)

Agus Salim N.A.

2014-01-01

Full Text Available This article is a study on biomimicry of palm tree towards a building form. It is to find a suitable form and pattern that can be applied to building shell to ease building maintenance operation beside to enhance the aesthetic value of a building architecture. The research has been carried out by observation and modeling on some various species of palm tree’s patterns and forms. The result expectation can be found at the end of this research by producing the best pattern of palm tree that can be adapted to building envelop as the whole form of a building.

Compromised data from social media to big data

CERN Document Server

Redden, Joanna; Langlois, Ganaele

2015-01-01

There has been a data rush in the past decade brought about by online communication and, in particular, social media (Facebook, Twitter, Youtube, among others), which promises a new age of digital enlightenment. But social data is compromised: it is being seized by specific economic interests, it leads to a fundamental shift in the relationship between research and the public good, and it fosters new forms of control and surveillance. Compromised Data: From Social Media to Big Data explores how we perform critical research within a compromised social data framework. The expert, international l

Cold Forming of Ni-Ti Shape Memory Alloy Sheet

Science.gov (United States)

Fann, Kaung-Jau; Su, Jhe-Yung

2018-03-01

Ni-Ti shape memory alloy has two specific properties, superelasiticity and shape memory effect, and thus is widely applied in diverse industries. To extend its further application, this study attempts to investigate the feasibility of cold forming its sheet blank especially under a bi-axial tensile stress state. Not only experiments but also a Finite Element Analysis (FEA) with DEFORM 2D was conducted in this study. The material data for FEA was accomplished by the tensile test. An Erichsen-like cupping test was performed as well to determine the process parameter for experiment setup. As a result of the study, the Ni-Ti shape memory alloy sheet has a low formability for cold forming and shows a relative large springback after releasing the forming load.

Vacuum type D initial data

Science.gov (United States)

García-Parrado Gómez-Lobo, Alfonso

2016-09-01

A vacuum type D initial data set is a vacuum initial data set of the Einstein field equations whose data development contains a region where the space–time is of Petrov type D. In this paper we give a systematic characterisation of a vacuum type D initial data set. By systematic we mean that the only quantities involved are those appearing in the vacuum constraints, namely the first fundamental form (Riemannian metric) and the second fundamental form. Our characterisation is a set of conditions consisting of the vacuum constraints and some additional differential equations for the first and second fundamental forms These conditions can be regarded as a system of partial differential equations on a Riemannian manifold and the solutions of the system contain all possible regular vacuum type D initial data sets. As an application we particularise our conditions for the case of vacuum data whose data development is a subset of the Kerr solution. This has applications in the formulation of the nonlinear stability problem of the Kerr black hole.

Structuring free form verbal descriptions in equipment failure reports

International Nuclear Information System (INIS)

Huzdovich, J.

1983-01-01

Information is encoded for convenience in computer sort/search routines used to manage a large number of records. The codes in use for equipment failure reports are limited due to practical considerations, and this limitation forces the reporter to leave out information to satisfy the coding requirements. The free form verbal descriptions, as found in the Generating Availability Data System (GADS) and the Nuclear Plant Reliability Data System (NPRDS), allow for reporting of this non-codable information. A systematic approach to constructing the verbal description based on rules of grammar, especially syntax, results in a structured narrative suitable for computer data management schemes. In addition, the reporter has a full range of descriptive terminology and does not have to select subjectively from a predetermined, limited vocabulary to describe the event. This paper introduces a concept that places in perspective the integration of structured, formal reporting and free form verbal description. A second benefit of this structured narrative is the systematic development of failure mode/failure cause relationships in the event

Liquid Film Migration in Warm Formed Aluminum Brazing Sheet

Science.gov (United States)

Benoit, M. J.; Whitney, M. A.; Wells, M. A.; Jin, H.; Winkler, S.

2017-10-01

Warm forming has previously proven to be a promising manufacturing route to improve formability of Al brazing sheets used in automotive heat exchanger production; however, the impact of warm forming on subsequent brazing has not previously been studied. In particular, the interaction between liquid clad and solid core alloys during brazing through the process of liquid film migration (LFM) requires further understanding. Al brazing sheet comprised of an AA3003 core and AA4045 clad alloy, supplied in O and H24 tempers, was stretched between 0 and 12 pct strain, at room temperature and 523K (250 °C), to simulate warm forming. Brazeability was predicted through thermal and microstructure analysis. The rate of solid-liquid interactions was quantified using thermal analysis, while microstructure analysis was used to investigate the opposing processes of LFM and core alloy recrystallization during brazing. In general, liquid clad was consumed relatively rapidly and LFM occurred in forming conditions where the core alloy did not recrystallize during brazing. The results showed that warm forming could potentially impair brazeability of O temper sheet by extending the regime over which LFM occurs during brazing. No change in microstructure or thermal data was found for H24 sheet when the forming temperature was increased, and thus warm forming was not predicted to adversely affect the brazing performance of H24 sheet.

Method of forming aluminum oxynitride material and bodies formed by such methods

Science.gov (United States)

Bakas, Michael P [Ammon, ID; Lillo, Thomas M [Idaho Falls, ID; Chu, Henry S [Idaho Falls, ID

2010-11-16

Methods of forming aluminum oxynitride (AlON) materials include sintering green bodies comprising aluminum orthophosphate or another sacrificial material therein. Such green bodies may comprise aluminum, oxygen, and nitrogen in addition to the aluminum orthophosphate. For example, the green bodies may include a mixture of aluminum oxide, aluminum nitride, and aluminum orthophosphate or another sacrificial material. Additional methods of forming aluminum oxynitride (AlON) materials include sintering a green body including a sacrificial material therein, using the sacrificial material to form pores in the green body during sintering, and infiltrating the pores formed in the green body with a liquid infiltrant during sintering. Bodies are formed using such methods.

Electromagnetic form factors of composite systems

International Nuclear Information System (INIS)

Nowak, E.J.

1978-01-01

Electromagnetic form factors are examined for a spin-zero, two-body composite system with emphasis on the case of small momentum transfer and/or deep (relativistic) binding. Perturbation theory calculations are first performed using spin-zero and then spin-one-half constituents. A dispersion representation of the bound-state vertex function is conjectured first for scalar and then for fermion constituents. Then a relativistic effective range approximation (RERA) is developed for each case and applied to the calculation of the electromagnetic form factor. The approach is applied to the study of the charge radii of the K 0 and K + mesons. The K/sub l3/ form factor is calculated in the fermion constituent RERA model, and restrictions are imposed on the model parameters from available experimental data. With these restrictions the limits 0.24fm less than or equal to √[abs. value ( 2 >/sub K 0 /)] less than or equal to = 0.36fm and 0.66fm less than or equal to = √( 2 >/sub K + /) less than or equal to 0.79fm are obtained for the kaon charge radii, and -.22 less than or equal to xi less than or equal to -.13 is found for the ratio of the neutral to charged kaon charge radius squared

On the Tetragonal Forms of KMo 4O 6

Science.gov (United States)

McCarroll, W. H.; Ramanujachary, K. V.; Greenblatt, M.; Marsh, Richard E.

1995-06-01

A reexamination of the X-ray diffraction data for the tetragonal form of KMo4O6 prepared by fused salt electrolysis leads to the conclusion that the crystal structure is better described by using space group P 4/mbm and not P4¯ as previously reported. However, refinement in the new space group does not result in any significant changes in the atomic arrangement. Possible reasons for the significant difference between the c lattice parameter of this form of KMo4O6 and that prepared at high pressures are also discussed.

VizieR Online Data Catalog: Circumnuclear star-forming regions (Alvarez-Alvarez+, 2015)

Science.gov (United States)

Alvarez-Alvarez, M.; Diaz, A. I.; Terlevich, E.; Terlevich, R.

2016-01-01

In order to achieve our scientific goals, we have studied a diverse population of galaxies with reported circumnuclear rings of SFRs in the bibliography. The data were acquired during five observing runs. For the first two runs (from 1988 to 1990), we used a blue sensitive GEC CCD at the f/15 Cassegrain focus of the 1.0m. Jacobus Kaptein Telescope of the Isaac Newton Group at the Observatorio del Roque de los Muchachos, La Palma, Spain. The CCD had 578x385 pixels 22um wide. The last three observing runs were carried on from 1999 to 2000 at the Centro Astronomico Hispano Aleman de Calar Alto, Almeria, Spain. (3 data files).

Dyadic Short Forms of the Wechsler Adult Intelligence Scale-IV.

Science.gov (United States)

Denney, David A; Ringe, Wendy K; Lacritz, Laura H

2015-08-01

Full Wechsler Adult Intelligence Scale-Fourth Edition (WAIS-IV) administration can be time-consuming and may not be necessary when intelligence quotient estimates will suffice. Estimated Full Scale Intelligence Quotient (FSIQ) and General Ability Index (GAI) scores were derived from nine dyadic short forms using individual regression equations based on data from a clinical sample (n = 113) that was then cross validated in a separate clinical sample (n = 50). Derived scores accounted for 70%-83% of the variance in FSIQ and 77%-88% of the variance in GAI. Predicted FSIQs were strongly associated with actual FSIQ (rs = .73-.88), as were predicted and actual GAIs (rs = .80-.93). Each of the nine dyadic short forms of the WAIS-IV was a good predictor of FSIQ and GAI in the validation sample. These data support the validity of WAIS-IV short forms when time is limited or lengthier batteries cannot be tolerated by patients. © The Author 2015. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Elastic form factors at higher CEBAF energies

Energy Technology Data Exchange (ETDEWEB)

Petratos, G.G. [Kent State Univ., OH (United States)

1994-04-01

The prospects for elastic scattering from few body systems with higher beam energies at CEBAF is presented. The deuteron and{sup 3}He elastic structure functions A(Q{sup 2}) can be measured at sufficiently high momentum transfers to study the transition between the conventional meson-nucleon and the constituent quark-gluon descriptions. Possible improvements in the proton magnetic form factor data are also presented.

Demystifying Data

Science.gov (United States)

Dash, Carolyn; Hug, Barbara

2014-01-01

We constantly encounter data--in the form of graphs--that convey information about weather, medicine, politics, finances, and nutrition. These graphs are intended to help us visualize data for easy interpretation; however, approximately 41% of adults in the United States have low graph literacy (Galesic and Garcia-Retamero 2011). In this article,…

Adaptive municipal electronic forms

NARCIS (Netherlands)

Kuiper, Pieternel; van Dijk, Elisabeth M.A.G.; Bondarouk, Tatiana; Ruel, Hubertus Johannes Maria; Guiderdoni-Jourdain, Karine; Oiry, Ewan

Adaptation of electronic forms (e-forms) seems to be a step forward to reduce the burden for people who fill in forms. Municipalities more and more offer e-forms online that can be used by citizens to request a municipal product or service or by municipal employees to place a request on behalf of a

78 FR 44424 - Revisions to Page 700 of FERC Form No. 6

Science.gov (United States)

2013-07-24

.... ] 35,561, at P 9 (2008)). 32. AOPL argues Form 6 includes historic accounting data that (1) does not... Cost of Service Based Analysis Schedule, of FERC Form No. 6, Annual Report of Oil Pipeline Companies... costs, including federal income taxes, plus a specified return on invested capital.'' City of...

A Global Analysis of the Strange Vector and Axial Form Factors of the Nucleon and their Uncertainties

Energy Technology Data Exchange (ETDEWEB)

Schaub, John [New Mexico State Univ., Las Cruces, NM (United States); Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States)

2010-07-01

We studied the strange contributions to the elastic vector and axial form factors of the nucleon using all available elastic electroweak scattering data. Specifically, we combine elastic nu-p and nubar-p scattering cross-section data from the Brookhaven E734 experiment with elastic ep and quasi-elastic ed and e-⁴He scattering parity-violating asymmetry data from the SAMPLE, HAPPEx, PVA4 and G0 experiments. We not only determined these form factors at individual values of momentum-transfer (Q²), as other groups have done recently, but also fit the Q²-dependence of these form factors using simple functional forms. I present an overview of the G⁰ backward-angle experiment as well as the results of these fits using existing data, along with some expectations of how we can improve our knowledge of these form factors if the MicroBooNE collaboration completes their experiment.

The NE11 experiment at SLAC and the neutron form factors

International Nuclear Information System (INIS)

Stuart, L.M.; Lung, A.; Bosted, P.E.

1993-05-01

The neutron electromagnetic form factors G En and G Mn , which reflect the charge and magnetization distributions within the neutron, are of fundamental importance for understanding nucleon structure, and are necessary for calculations of processes involving the electromagnetic interaction with complex nuclei. These quantities are functions of Q 2 , the four-momentum transfer squared. SLAC experiment NE11 has measured these form factors out to a Q 2 of 4.0 (GeV/c) 2 with high precision, and the results have been recently published. This paper provides some additional details on the extraction of G Mn and G En from the NE11 measurements. Several formalisms have been developed over the years which attempt to understand the nucleon form factors using basic physical principles. Vector Meson Dominance (VMD) models are based on superpositions of photon couplings to various vector mesons. These models generally involve free parameters which are fit to form factor data at low Q 2 , and are not expected to be valid at high Q 2 . For asymptotically large Q 2 , dimensional scaling methods and perturbative Quantum Chromodynamics (pQCD) predict form factor behavior at large Q 2 , but they do not make absolute magnitude predictions. To describe the form factor behavior at intermediate values of Q 2 , a hybrid model by Gari and Kruempelmann (GK) uses VMD constraints at low Q 2 and pQCD constraints at high Q 2 . Free parameters in the model are adjusted to fit existing form factor data. Other approaches include the use of QCD sum rules to make absolute predictions, diquark models, and relativistic constituent quark models

The Canadian Urban Environmental Health Research Consortium - a protocol for building a national environmental exposure data platform for integrated analyses of urban form and health.

Science.gov (United States)

Brook, Jeffrey R; Setton, Eleanor M; Seed, Evan; Shooshtari, Mahdi; Doiron, Dany

2018-01-08

Multiple external environmental exposures related to residential location and urban form including, air pollutants, noise, greenness, and walkability have been linked to health impacts or benefits. The Canadian Urban Environmental Health Research Consortium (CANUE) was established to facilitate the linkage of extensive geospatial exposure data to existing Canadian cohorts and administrative health data holdings. We hypothesize that this linkage will enable investigators to test a variety of their own hypotheses related to the interdependent associations of built environment features with diverse health outcomes encompassed by the cohorts and administrative data. We developed a protocol for compiling measures of built environment features that quantify exposure; vary spatially on the urban and suburban scale; and can be modified through changes in policy or individual behaviour to benefit health. These measures fall into six domains: air quality, noise, greenness, weather/climate, and transportation and neighbourhood factors; and will be indexed to six-digit postal codes to facilitate merging with health databases. Initial efforts focus on existing data and include estimates of air pollutants, greenness, temperature extremes, and neighbourhood walkability and socioeconomic characteristics. Key gaps will be addressed for noise exposure, with a new national model being developed, and for transportation-related exposures, with detailed estimates of truck volumes and diesel emissions now underway in selected cities. Improvements to existing exposure estimates are planned, primarily by increasing temporal and/or spatial resolution given new satellite-based sensors and more detailed national air quality modelling. Novel metrics are also planned for walkability and food environments, green space access and function and life-long climate-related exposures based on local climate zones. Critical challenges exist, for example, the quantity and quality of input data to many of

When data representation compromise data security

DEFF Research Database (Denmark)

Simonsen, Eivind Ortind; Dahl, Mads Ronald

WHEN DATA REPRESENTATION COMPROMISE DATA SECURITY The workflow of transforming data into informative representations makes extensive usage of computers and software. Scientists have a conventional tradition for producing publications that include tables and graphs as data representations....... These representations can be used for multiple purposes such as publications in journals, teaching and conference material. But when created, stored and distributed in a digital form there is a risk of compromising data security. Data beyond the once used specifically to create the representation can be included...... on the internet over many years? A new legislation proposed in 2012 by the European Commission on protection of personal data will be implemented from 2015. The new law will impose sanction options ranging from a warning to a fine up to 100.000.000 EUR. We argue that this new law will lead to especially...

Plural Form and Franchisors Performance : Early Empirical Findings From Europe

OpenAIRE

Perdreau , Frédéric; Le Nadant , Anne-Laure; Cliquet , Gérard

2010-01-01

This paper deals with the relationships between plural form and performance in franchising networks in Europe. It is proposed that a franchisor's life cycle stage and human capital assets influence the relationship between plural form and performance. The model has been estimated using panel data on 41 publicly listed European franchising networks in the 1998-2007 period. The proportion of network-franchised units to the total number of its units in its distribution system is used as the indi...

Protonated form: the potent form of potassium-competitive acid blockers.

Directory of Open Access Journals (Sweden)

Hua-Jun Luo

Full Text Available Potassium-competitive acid blockers (P-CABs are highly safe and active drugs targeting H+,K+-ATPase to cure acid-related gastric diseases. In this study, we for the first time investigate the interaction mechanism between the protonated form of P-CABs and human H+,K+-ATPase using homology modeling, molecular docking, molecular dynamics and binding free energy calculation methods. The results explain why P-CABs have higher activities with higher pKa values or at lower pH. With positive charge, the protonated forms of P-CABs have more competitive advantage to block potassium ion into luminal channel and to bind with H+,K+-ATPase via electrostatic interactions. The binding affinity of the protonated form is more favorable than that of the neutral P-CABs. In particular, Asp139 should be a very important binding site for the protonated form of P-CABs through hydrogen bonds and electrostatic interactions. These findings could promote the rational design of novel P-CABs.

Protonated form: the potent form of potassium-competitive acid blockers.

Science.gov (United States)

Luo, Hua-Jun; Deng, Wei-Qiao; Zou, Kun

2014-01-01

Potassium-competitive acid blockers (P-CABs) are highly safe and active drugs targeting H+,K+-ATPase to cure acid-related gastric diseases. In this study, we for the first time investigate the interaction mechanism between the protonated form of P-CABs and human H+,K+-ATPase using homology modeling, molecular docking, molecular dynamics and binding free energy calculation methods. The results explain why P-CABs have higher activities with higher pKa values or at lower pH. With positive charge, the protonated forms of P-CABs have more competitive advantage to block potassium ion into luminal channel and to bind with H+,K+-ATPase via electrostatic interactions. The binding affinity of the protonated form is more favorable than that of the neutral P-CABs. In particular, Asp139 should be a very important binding site for the protonated form of P-CABs through hydrogen bonds and electrostatic interactions. These findings could promote the rational design of novel P-CABs.

Integrating Flow, Form, and Function for Improved Environmental Water Management

Science.gov (United States)

Albin Lane, Belize Arela

Rivers are complex, dynamic natural systems. The performance of river ecosystem functions, such as habitat availability and sediment transport, depends on the interplay of hydrologic dynamics (flow) and geomorphic settings (form). However, most river restoration studies evaluate the role of either flow or form without regard for their dynamic interactions. Despite substantial recent interest in quantifying environmental water requirements to support integrated water management efforts, the absence of quantitative, transferable relationships between river flow, form, and ecosystem functions remains a major limitation. This research proposes a novel, process-driven methodology for evaluating river flow-form-function linkages in support of basin-scale environmental water management. This methodology utilizes publically available geospatial and time-series data and targeted field data collection to improve basic understanding of river systems with limited data and resource requirements. First, a hydrologic classification system is developed to characterize natural hydrologic variability across a highly altered, physio-climatically diverse landscape. Next, a statistical analysis is used to characterize reach-scale geomorphic variability and to investigate the utility of topographic variability attributes (TVAs, subreach-scale undulations in channel width and depth), alongside traditional reach-averaged attributes, for distinguishing dominant geomorphic forms and processes across a hydroscape. Finally, the interacting roles of flow (hydrologic regime, water year type, and hydrologic impairment) and form (channel morphology) are quantitatively evaluated with respect to ecosystem functions related to hydrogeomorphic processes, aquatic habitat, and riparian habitat. Synthetic river corridor generation is used to evaluate and isolate the role of distinct geomorphic attributes without the need for intensive topographic surveying. This three-part methodology was successfully

Intermediate energy data

International Nuclear Information System (INIS)

Koning, A.J.; Fukahori, T.; Hasegawa, A.

1998-01-01

Subgroup 13 (SG13) on Intermediate Energy Nuclear data was formed by NEA Nuclear Science Committee to solve common problems of these types of data for nuclear applications. An overview is presented in this final report of the present activities of SG13, including data needs, high-priority nuclear data request list (nuclides), compilation of experimental data, specialists meetings and benchmarks, data formats and data libraries. Some important accomplishments are summarized, and recommendations are presented. (R.P.)

Towards Data Science

OpenAIRE

Zhu, Yangyong; Xiong, Yun

2015-01-01

Currently, a huge amount of data is being rapidly generated in cyberspace. Datanature (all data in cyberspace) is forming due to a data explosion. Exploring the patterns and rules in datanature is necessary but difficult. A new discipline called Data Science is coming. It provides a type of novel research method (a data-intensive method) for natural and social sciences and goes beyond computer science in researching data. This paper presents the challenges presented by data and discusses what...

Energy demand with the flexible double-logarithmic functional form

International Nuclear Information System (INIS)

Nan, G.D.; Murry, D.A.

1992-01-01

A flexible double-logarithmic function form is developed to meet assumptions of consumer behavior. Then annual residential and commercial data (1970-87) are applied to this functional form to examine demand for petroleum products, electricity, and natural gas in California. The traditional double log-linear functional form has shortcomings of constant elasticities. The regression equations in this study, with varied estimated elasticities, overcome some of these shortcomings. All short-run own-price elasticities are inelastic and all income elasticities are close to unity in this study. According to the short-run time-trend elasticities, consumers' fuel preference in California is electricity. The long-run income elasticities also indicate that the residential consumers will consume more electricity and natural gas as their energy budgets increase in the long run. 14 refs., 5 tabs

Chemical and mechanical performance properties for various final waste forms -- PSPI scoping study

International Nuclear Information System (INIS)

Farnsworth, R.K.; Larsen, E.D.; Sears, J.W.; Eddy, T.L.; Anderson, G.L.

1996-09-01

The US DOE is obtaining data on the performance properties of the various final waste forms that may be chosen as primary treatment products for the alpha-contaminated low-level and transuranic waste at the INEL's Transuranic Storage Area. This report collects and compares selected properties that are key indicators of mechanical and chemical durability for Portland cement concrete, concrete formed under elevated temperature and pressure, sulfur polymer cement, borosilicate glass, and various forms of alumino-silicate glass, including in situ vitrification glass and various compositions of iron-enriched basalt (IEB) and iron-enriched basalt IV (IEB4). Compressive strength and impact resistance properties were used as performance indicators in comparative evaluation of the mechanical durability of each waste form, while various leachability data were used in comparative evaluation of each waste form's chemical durability. The vitrified waste forms were generally more durable than the non-vitrified waste forms, with the iron-enriched alumino-silicate glasses and glass/ceramics exhibiting the most favorable chemical and mechanical durabilities. It appears that the addition of zirconia and titania to IEB (forming IEB4) increases the leach resistance of the lanthanides. The large compositional ranges for IEB and IEB4 more easily accommodate the compositions of the waste stored at the INEL than does the composition of borosilicate glass. It appears, however, that the large potential variation in IEB and IEB4 compositions resulting from differing waste feed compositions can impact waste form durability. Further work is needed to determine the range of waste stream feed compositions and rates of waste form cooling that will result in acceptable and optimized IEB or IEB4 waste form performance. 43 refs

Dispersion-theoretical analysis of the nucleon electromagnetic form factors

Energy Technology Data Exchange (ETDEWEB)

Belushkin, M.

2007-09-29

The structure of the proton and the neutron is of fundamental importance for the study of the strong interaction dynamics over a wide range of momentum transfers. The nucleon form factors encode information on the internal structure of the nucleon as probed by the electromagnetic interaction, and, to a certain extent, reflect the charge and magnetisation distributions within the proton and the neutron. In this thesis we report on our investigation of the electromagnetic form factors of the proton and the neutron with dispersion relation techniques, including known experimental input on the {pi}{pi}, K anti K and the {rho}{pi} continua and perturbative QCD constraints. We include new experimental data on the pion form factor and the nucleon form factors in our simultaneous analysis of all four form factors in both the space- and the timelike regions for all momentum transfers, and perform Monte- Carlo sampling in order to obtain theoretical uncertainty bands. Finally, we discuss the implications of our results on the pion cloud of the nucleon, the nucleon radii and the Okubo-Zweig-Iizuka rule, and present our results of a model-independent approach to estimating two-photon effects in elastic electron-proton scattering. (orig.)

Dispersion-theoretical analysis of the nucleon electromagnetic form factors

International Nuclear Information System (INIS)

Belushkin, M.

2007-01-01

The structure of the proton and the neutron is of fundamental importance for the study of the strong interaction dynamics over a wide range of momentum transfers. The nucleon form factors encode information on the internal structure of the nucleon as probed by the electromagnetic interaction, and, to a certain extent, reflect the charge and magnetisation distributions within the proton and the neutron. In this thesis we report on our investigation of the electromagnetic form factors of the proton and the neutron with dispersion relation techniques, including known experimental input on the ππ, K anti K and the ρπ continua and perturbative QCD constraints. We include new experimental data on the pion form factor and the nucleon form factors in our simultaneous analysis of all four form factors in both the space- and the timelike regions for all momentum transfers, and perform Monte- Carlo sampling in order to obtain theoretical uncertainty bands. Finally, we discuss the implications of our results on the pion cloud of the nucleon, the nucleon radii and the Okubo-Zweig-Iizuka rule, and present our results of a model-independent approach to estimating two-photon effects in elastic electron-proton scattering. (orig.)

Data Archiving and Networked Services (DANS) promotes sustained access to digital research data

NARCIS (Netherlands)

van Berchum, M.; Kraaikamp, Emilie

2015-01-01

Data Archiving and Networked Services (DANS) promotes sustained access to digital research data. For this purpose, DANS encourages researchers to archive and reuse data in a sustained form. In the online archiving system EASY research data is stored in a permanent and sustainable manner, according

Forms Management Policy

Science.gov (United States)

To establish EPA’s Forms Management Program; to describe the requisite roles, responsibilities, and procedures necessary for the successful management of EPA forms; and to more clearly fulfill EPA’s obligations in this regard.

Lysimeter data as input to performance assessment models

International Nuclear Information System (INIS)

McConnell, J.W. Jr.

1998-01-01

The Field Lysimeter Investigations: Low-Level Waste Data Base Development Program is obtaining information on the performance of radioactive waste forms in a disposal environment. Waste forms fabricated using ion-exchange resins from EPICOR-117 prefilters employed in the cleanup of the Three Mile Island (TMI) Nuclear Power Station are being tested to develop a low-level waste data base and to obtain information on survivability of waste forms in a disposal environment. The program includes reviewing radionuclide releases from those waste forms in the first 7 years of sampling and examining the relationship between code input parameters and lysimeter data. Also, lysimeter data are applied to performance assessment source term models, and initial results from use of data in two models are presented

Science on form

International Nuclear Information System (INIS)

Ishizaka, Shozo; Kato, Yoshihiro; Takaki, Ryuji; Toriwaki, Jun-ichiro

1987-01-01

The purpose of the Symposium was to discuss interdisciplinal science aspects of form. 'Form' depends on the material and the changes. But, it is the form that appears evident at once and endures. Form is absorbed from every field as media of information. One part of the work covers the description of non-periodic phenomena, morphogenesis or evolution. Irreducible stubborn facts as diseases or social problems, or whatever else that could not be analyzed are integrally challenged to be systematized by computer simulation. The other part covers the finding of laws for determining how systems behave. Attention should be paid to pattern recognition, image processing and pattern formation. The Symposium proceeded with no parallel sessions, and participants from various fields made exciting discussions in an interdisciplinal atmosphere. (Auth.)

Vocational Education Program/Course Inventory Form PCI. Explanation and Instructional Manual.

Science.gov (United States)

California Occupational Information Coordinating Committee, Sacramento.

This manual for teachers, administrators, and counselors both explains the Program/Course Inventory (PCI), a data collection instrument, and provides instructions for completing the PCI form. The first section describes the PCI developed by the Ventura County Superintendent of Schools staff to collect data that define vocational education…

Automorphic Forms and Mock Modular Forms in String Theory

Science.gov (United States)

Nazaroglu, Caner

We study a variety of modular invariant objects in relation to string theory. First, we focus on Jacobi forms over generic rank lattices and Siegel forms that appear in N = 2, D = 4 compactifications of heterotic string with Wilson lines. Constraints from low energy spectrum and modularity are employed to deduce the relevant supersymmetric partition functions entirely. This procedure is applied on models that lead to Jacobi forms of index 3, 4, 5 as well as Jacobi forms over root lattices A2 and A3. These computations are then checked against an explicit orbifold model which can be Higgsed to the models under question. Models with a single Wilson line are then studied in detail with their relation to paramodular group Gammam as T-duality group made explicit. These results on the heterotic string side are then turned into predictions for geometric invariants using TypeII - Heterotic duality. Secondly, we study theta functions for indenite signature lattices of generic signature. Building on results in literature for signature (n-1,1) and (n-2,2) lattices, we work out the properties of generalized error functions which we call r-tuple error functions. We then use these functions to build such indenite theta functions and describe their modular completions.

Forms of Arthritis

Science.gov (United States)

... this page please turn Javascript on. Forms of Arthritis Past Issues / Fall 2006 Table of Contents Today, ... of Linda Saisselin Osteoarthritis (OA) — the form of arthritis typically occurring during middle or old age, this ...

Normal forms for Poisson maps and symplectic groupoids around Poisson transversals.

Science.gov (United States)

Frejlich, Pedro; Mărcuț, Ioan

2018-01-01

Poisson transversals are submanifolds in a Poisson manifold which intersect all symplectic leaves transversally and symplectically. In this communication, we prove a normal form theorem for Poisson maps around Poisson transversals. A Poisson map pulls a Poisson transversal back to a Poisson transversal, and our first main result states that simultaneous normal forms exist around such transversals, for which the Poisson map becomes transversally linear, and intertwines the normal form data of the transversals. Our second result concerns symplectic integrations. We prove that a neighborhood of a Poisson transversal is integrable exactly when the Poisson transversal itself is integrable, and in that case we prove a normal form theorem for the symplectic groupoid around its restriction to the Poisson transversal, which puts all structure maps in normal form. We conclude by illustrating our results with examples arising from Lie algebras.

Thermodynamic and relative approach to compute glass-forming ...

Indian Academy of Sciences (India)

models) characteristic: the isobaric heat capacity (Cp) of oxides, and execute a mathematical treatment of oxides thermodynamic data. We note this coefficient as thermodynamical relative glass-forming ability (ThRGFA) and for- mulate a model to compute it. Computed values of 2nd, 3rd, 4th and 5th period metal oxides ...

Radial-rotation profile forming: A new processing technology of incremental sheet metal forming

Science.gov (United States)

Laue, Robert; Härtel, Sebastian; Awiszus, Birgit

2018-05-01

Incremental forming processes (i.e., spinning) of sheet metal blanks into cylindrical cups are suitable for lower lot sizes. The produced cups were frequently used as preforms to produce workpieces in further forming steps with additional functions like profiled hollow parts [1]. The incremental forming process radial-rotation profile forming has been developed to enable the production of profiled hollow parts with low sheet thinning and good geometrical accuracy. The two principal forming steps are the production of the preform by rotational swing-folding [2] and the subsequent radial profiling of the hollow part in one clamping position. The rotational swing-folding process is based on a combination of conventional spinning and swing-folding. Therefore, a round blank rotates on a profiled mandrel and due to the swinging of a cylindrical forming tool, the blank is formed to a cup with low sheet thinning. In addition, thickening results at the edge of the blank and wrinkling occurs. However, the wrinkles are formed into the indentation of the profiled mandrel and can be reshaped as an advantage in the second process step, the radial profiling. Due to the rotation and continuous radial feed of a profiled forming tool to the profiled mandrel, the axial profile is formed in the second process step. Because of the minor relative movement in axial direction between tool and blank, low sheet thinning occurs. This is an advantage of the principle of the process.

Development of an adverse events reporting form for Korean folk medicine.

Science.gov (United States)

Park, Jeong Hwan; Choi, Sun-Mi; Moon, Sujeong; Kim, Sungha; Kim, Boyoung; Kim, Min-Kyeoung; Lee, Sanghun

2017-05-01

We developed an adverse events (AEs) reporting form for Korean folk medicine. The first version of the form was developed and tested in the clinical setting for spontaneous reporting of AEs. Additional revisions to the reporting form were made based on collected data and expert input. We developed an AEs reporting form for Korean folk medicine. The items of this form were based on patient information, folk medicine properties, and AEs. For causality assessment, folk medicine properties such as classification, common and vernacular names, scientific name, part used, harvesting time, storage conditions, purchasing route, product licensing, prescription, persons with similar exposure, any remnant of raw natural products collected from the patient, and cautions or contraindications were added. This is the first reporting form for AEs that incorporates important characteristics of Korean folk medicine. This form would have an important role in reporting adverse events for Korean folk medicine. © 2016 The Authors. Pharmacoepidemiology and Drug Safety Published by John Wiley & Sons Ltd. © 2016 The Authors. Pharmacoepidemiology and Drug Safety Published by John Wiley & Sons Ltd.

Final waste forms project: Performance criteria for phase I treatability studies

International Nuclear Information System (INIS)

Gilliam, T.M.; Hutchins, D.A.; Chodak, P. III

1994-06-01

This document defines the product performance criteria to be used in Phase I of the Final Waste Forms Project. In Phase I, treatability studies will be performed to provide open-quotes proof-of-principleclose quotes data to establish the viability of stabilization/solidification (S/S) technologies. This information is required by March 1995. In Phase II, further treatability studies, some at the pilot scale, will be performed to provide sufficient data to allow treatment alternatives identified in Phase I to be more fully developed and evaluated, as well as to reduce performance uncertainties for those methods chosen to treat a specific waste. Three main factors influence the development and selection of an optimum waste form formulation and hence affect selection of performance criteria. These factors are regulatory, process-specific, and site-specific waste form standards or requirements. Clearly, the optimum waste form formulation will require consideration of performance criteria constraints from each of the three categories. Phase I will focus only on the regulatory criteria. These criteria may be considered the minimum criteria for an acceptable waste form. In other words, a S/S technology is considered viable only if it meet applicable regulatory criteria. The criteria to be utilized in the Phase I treatability studies were primarily taken from Environmental Protection Agency regulations addressed in 40 CFR 260 through 265 and 268; and Nuclear Regulatory Commission regulations addressed in 10 CFR 61. Thus the majority of the identified criteria are independent of waste form matrix composition (i.e., applicable to cement, glass, organic binders etc.)

Final waste forms project: Performance criteria for phase I treatability studies

Energy Technology Data Exchange (ETDEWEB)

Gilliam, T.M. [Oak Ridge National Lab., TN (United States); Hutchins, D.A. [Martin Marietta Energy Systems, Inc., Oak Ridge, TN (United States); Chodak, P. III [Massachusetts Institute of Technology (United States)

1994-06-01

This document defines the product performance criteria to be used in Phase I of the Final Waste Forms Project. In Phase I, treatability studies will be performed to provide {open_quotes}proof-of-principle{close_quotes} data to establish the viability of stabilization/solidification (S/S) technologies. This information is required by March 1995. In Phase II, further treatability studies, some at the pilot scale, will be performed to provide sufficient data to allow treatment alternatives identified in Phase I to be more fully developed and evaluated, as well as to reduce performance uncertainties for those methods chosen to treat a specific waste. Three main factors influence the development and selection of an optimum waste form formulation and hence affect selection of performance criteria. These factors are regulatory, process-specific, and site-specific waste form standards or requirements. Clearly, the optimum waste form formulation will require consideration of performance criteria constraints from each of the three categories. Phase I will focus only on the regulatory criteria. These criteria may be considered the minimum criteria for an acceptable waste form. In other words, a S/S technology is considered viable only if it meet applicable regulatory criteria. The criteria to be utilized in the Phase I treatability studies were primarily taken from Environmental Protection Agency regulations addressed in 40 CFR 260 through 265 and 268; and Nuclear Regulatory Commission regulations addressed in 10 CFR 61. Thus the majority of the identified criteria are independent of waste form matrix composition (i.e., applicable to cement, glass, organic binders etc.).

PDS Lunar Data Node Restoration of Apollo In-Situ Surface Data

Science.gov (United States)

Williams, David R.; Hills, H. Kent; Guinness, Edward A.; Lowman, Paul D.; Taylor, Patrick T.

2010-01-01

The Apollo missions between 1969 and 1972 deployed scientific instruments on the Moon's surface which made in-situ measurements of the lunar environment. Apollo II had the short-term Early Apollo Surface Experiments Package (EASEP) and Apollos 12, 14, 15, 16, and 17 each set up an Apollo Lunar Surface Experiments Package (ALSEP). Each ALSEP package contained a different suite of instruments which took measurements and radioed the results back to Earth over periods from 5 to 7 years until they were turned off on 30 September 1977. To this day the ALSEP data remain the only long-term in-situ information on the Moon's surface environment. The Lunar Data Node (LDN) has been formed under the auspices of the Planetary Data System (PDS) Geosciences Node to put relevant, scientifically important Apollo data into accessible digital form for use by researchers and mission planners. We will report on progress made since last year and plans for future data restorations.

Measurement of the form factor ratios in semileptonic decays of charm mesons

International Nuclear Information System (INIS)

R. Zaliznyak

1999-01-01

I have measured the form factor ratios r 2 = A 2 (0)/A 1 (0) and r V = V (0)/A 1 (0) in the semileptonic charm meson decay D + → (anti K) *0 e + ν e from data collected by the Fermilab E791 collaboration. Form factors are introduced in the calculation of the hadronic current in semileptonic decays of strange, charm, or bottom mesons, such as D + → (anti K) *0 e + ν e . Semileptonic decays provide insight into quark coupling to the W boson since the leptonic and hadronic amplitudes in the Feynman diagram for the decay are completely separate. There are no strong interactions between the final state leptons and quarks. A number of theoretical models predict the values of the form factors for D + → (anti K) *0 e + ν e , though there is a large range of predictions. E791 is a hadroproduction experiment that recorded over 20 billion interactions with a 500 GeV π - beam incident on five thin targets during the 1991-92 Fermilab fixed-target run. Approximately 3000 D + → (anti K) *0 e + ν e decays are fully reconstructed. In order to extract the form factor ratios from the data, I implement a multidimensional unbinned maximum likelihood fit with a large sample of simulated (Monte Carlo) D + → (anti K) *0 e + ν e events. The large E791 data sample provides the most precise measurement of the form factor ratios to date. The measured values for the form factor ratios are r 2 = 0.71 ± 0.08 ± 0.09 and r V = 1.84 ± 0.11 ± 0.08. These results are in good agreement with some Lattice Gauge calculations. However the agreement with quark model predictions is not as good

Consonant Alternations in Changing Verb Forms in Modern Russian

Directory of Open Access Journals (Sweden)

Olga Alekseevna Gracheva

2015-12-01

Full Text Available The article is devoted to consonant alternations in the verbal final basis that is associated with the processes of verbal form changes. It presents some results of the verbal form analysis that are being conjugated as types 4-8. The source of the material was "Grammatical dictionary of the Russian language" by A.A. Zaliznyak. It is proved that the alternation in verbal forms of modern Russian depends on the character of language levels coordination thus performing the following functions: grammar meaning intensification, lexical homonyms differentiation, and grammar form identification including. The novelty of the data presented in the article consists in defining the principle statement that there exists some variations in the balance between regularity and predictiveness of consonant alternations in verbal forms: the alternation is more predictable if the number of grammema clusters in a paradigm that they mark is lower (type 4 with inflection -ить; on the contrary, the less predictable the alternations are, the bigger grammema clusters in the paradigm are, (i.e. when used for intensifying type 6 (with inflection -ать. The comparison of verbal forms with and without alternations resulted in the following conclusion: an infinitive form of a verb will predict with greater certainly types of alternations in the final basis and point to a definite kind of morphological meaning. The regularities revealed might be used in a descriptive morphology of modern Russian and in practice of teaching Russian as a foreign language.

Technology for collecting and analyzing relational data

Directory of Open Access Journals (Sweden)

E. N. Fedorova

2016-01-01

Full Text Available Purpose of the study. The scientific and educational organizations use traditionally e-mail with Microsoft Excel spreadsheets and Microsoft Word documents for operational data collection. The disadvantages of this approach include the lack of control of the correctness of the data input, the complexity of processing the information received due to non-relational data model, etc. There are online services that enable to organize the collection of data in a relational form. The disadvantages of these systems are: the absence of thesaurus support; a limited set of elements of data input control; the limited control the operation of the input form; most of the systems is shareware, etc. Thus, it is required the development of Internet data collection and analysis technology, which should allow to identify quickly model the data collected and automatically implement data collection in accordance with this model.Materials and methods. The article describes the technology developed and tested for operational data collection and analysis using "Faramant" system. System operation "Faramant" is based on a model document, which includes three components: description of the data structure; visualization; logic of form work. All stages of the technology are performed by the user using the browser. The main stage of the proposed technology is the definition of the data model as a set of relational tables. To create a table within the system it’s required to determine the name and a list of fields. For each field, you must specify its name and use the control to the data input and logic of his work. Controls are used to organize the correct input data depending on the data type. Based on a model system "Faramant" automatically creates a filling form, using which users can enter information. To change the form visualization, you can use the form template. The data can be viewed page by page in a table. For table rows, you can apply different filters. To

Nucleon form factors, generalized parton distributions and quark angular momentum

International Nuclear Information System (INIS)

Diehl, Markus; Kroll, Peter; Regensburg Univ.

2013-02-01

We extract the individual contributions from u and d quarks to the Dirac and Pauli form factors of the proton, after a critical examination of the available measurements of electromagnetic nucleon form factors. From this data we determine generalized parton distributions for valence quarks, assuming a particular form for their functional dependence. The result allows us to study various aspects of nucleon structure in the valence region. In particular, we evaluate Ji's sum rule and estimate the total angular momentum carried by valence quarks at the scale μ=2 GeV to be J u v =0.230 +0.009 -0.024 and J d v =-0.004 +0.010 -0.016 .

Electromagnetic Transition Form Factor of the η meson with WASA-at-COSY

Science.gov (United States)

Goswami, A.

2016-11-01

In this work we present a study of the Dalitz decay η → γe+e-. The aim of this work is to measure the transition form factor of the η meson. The transition form factor of the η meson describes the electromagnetic structure of the meson. The study of the Dalitz decay helps to calculate the transition form factor of the η meson. When a particle is point-like it's decay rate can be calculated within QED. However, the complex structure of the meson modifies its decay rate. The transition form factor is determined by comparing the lepton-antilepton invariant mass distribution with QED. For this study data on proton-proton reaction at a beam energy of 1.4 GeV has been collected with WASA-at-COSY detector at Forschungszentrum Juelich, Germany. In the higher invariant mass region recent theoretical calculations slightly deviate from the fit to the data. We expect better results in the higher invariant mass region than previous measurements. The preliminary results of the analysis will be presented.

Electromagnetic Transition Form Factor of the η meson with WASA-at-COSY

Directory of Open Access Journals (Sweden)

Goswami A.

2016-01-01

Full Text Available In this work we present a study of the Dalitz decay η → γe+e−. The aim of this work is to measure the transition form factor of the η meson. The transition form factor of the η meson describes the electromagnetic structure of the meson. The study of the Dalitz decay helps to calculate the transition form factor of the η meson. When a particle is point-like it’s decay rate can be calculated within QED. However, the complex structure of the meson modifies its decay rate. The transition form factor is determined by comparing the lepton-antilepton invariant mass distribution with QED. For this study data on proton-proton reaction at a beam energy of 1.4 GeV has been collected with WASA-at-COSY detector at Forschungszentrum Juelich, Germany. In the higher invariant mass region recent theoretical calculations slightly deviate from the fit to the data. We expect better results in the higher invariant mass region than previous measurements. The preliminary results of the analysis will be presented.

Concentration and mindfulness meditations: unique forms of consciousness?

Science.gov (United States)

Dunn, B R; Hartigan, J A; Mikulas, W L

1999-09-01

Electroencephalographic (EEG) recordings from 19 scalp recording sites were used to differentiate among two posited unique forms of mediation, concentration and mindfulness, and a normal relaxation control condition. Analyzes of all traditional frequency bandwidth data (i.e., delta 1-3 Hz; theta, 4-7 Hz; alpha, 8-12 Hz; beta 1, 13-25 Hz; beta 2, 26-32 Hz) showed strong mean amplitude frequency differences between the two meditation conditions and relaxation over numerous cortical sites. Furthermore, significant differences were obtained between concentration and mindfulness states at all bandwidths. Taken together, our results suggest that concentration and mindfulness "meditations" may be unique forms of consciousness and are not merely degrees of a state of relaxation.

Constructing Data Curation Profiles

Directory of Open Access Journals (Sweden)

Michael Witt

2009-12-01

Full Text Available This paper presents a brief literature review and then introduces the methods, design, and construction of the Data Curation Profile, an instrument that can be used to provide detailed information on particular data forms that might be curated by an academic library. These data forms are presented in the context of the related sub-disciplinary research area, and they provide the flow of the research process from which these data are generated. The profiles also represent the needs for data curation from the perspective of the data producers, using their own language. As such, they support the exploration of data curation across different research domains in real and practical terms. With the sponsorship of the Institute of Museum and Library Services, investigators from Purdue University and the University of Illinois interviewed 19 faculty subjects to identify needs for discovery, access, preservation, and reuse of their research data. For each subject, a profile was constructed that includes information about his or her general research, data forms and stages, value of data, data ingest, intellectual property, organization and description of data, tools, interoperability, impact and prestige, data management, and preservation. Each profile also presents a specific dataset supplied by the subject to serve as a concrete example. The Data Curation Profiles are being published to a public wiki for questions and discussion, and a blank template will be disseminated with guidelines for others to create and share their own profiles. This study was conducted primarily from the viewpoint of librarians interacting with faculty researchers; however, it is expected that these findings will complement a wide variety of data curation research and practice outside of librarianship and the university environment.

Compilation of actinide neutron nuclear data

International Nuclear Information System (INIS)

1979-01-01

The Swedish nuclear data committee has compiled a selected set of neutron cross section data for the 16 most important actinide isotopes. The aim of the report is to present available data in a comprehensible way to allow a comparison between different evaluated libraries and to judge about the reliability of these libraries from the experimental data. The data are given in graphical form below about 1 ev and above about 10 keV shile the 2200 m/s cross sections and resonance integrals are given in numerical form. (G.B.)

Getting in-formed

DEFF Research Database (Denmark)

Hansbøl, Mikala

det vi undersøger på form gennem vores beskrivelser. Paperet tager afsæt i empiriske eksempler fra et postdoc projekt om et såkaldt 'serious game' - Mingoville. Projektet følger circuleringer og etableringer af Mingoville 'på en global markedsplads'. I paperet diskuteres hvordan vi som forskere samler....../performer de fænomener vi forsker i. Aktør-Netværks-Teoretiker Bruno Latour (2005) pointerer at enhver beskrivelse også er en form for forklaring. En form for forklaring, der putter ting ind i et skript og dermed også putter ting på form. Paperet diskuterer to tilgange til at gøre serious games og derved skabe viden om...... engagementer med disse fænomener i serious games forskning: experimentel og etnografisk....

Charge form factors and alpha-cluster internal structure of 12C

International Nuclear Information System (INIS)

Luk'yanov, V.K.; Zemlyanaya, E.V.; Kadrev, D.N.; Antonov, A.N.; Spasova, K.; Anagnostatos, G.S.; Ginis, P.; Giapitzakis, J.

1999-01-01

The transition densities and form factors of 0 + , 2 + , and 3 - states in 12 C are calculated in alpha-cluster model using the triangle frame with clusters in the vertices. The wave functions of nucleons in the alpha clusters are taken as they were obtained in the framework of the models used for the description of the 4 He form factor and momentum distribution which are based on the one-body density matrix construction. They contain effects of the short-range NN correlations, as well as the d-shell admixtures in 4 He. Calculations and the comparison with the experimental data show that visible effects on the form and magnitude of the 12 C form factors take place, especially at relatively large momentum transfers

Forecast of radionuclides release from actual waste form geometries

International Nuclear Information System (INIS)

Suarez, A.A.; Rzyski, B.M.; Sato, I.M.

1989-01-01

The complete understanding of the leaching mechanism of radionuclides from solid comentitious waste forms is still far from being reached. Much effort has been devoted, however, to identifying and explaining the main components which contribute to the dispersal of radionuclides out of the waste form to the environment. This is of prime importance when short term results are extrapolated into the future. The diffusion coefficient evaluation, based on experimental leaching data obtained from samples produced from the same batch was performed using the exact diffusion formulation applied to real geometric sample shape. This paper discusses the evaluation

Calculations of electromagnetic nucleon form factors and electroexcitation amplitudes of isobars

International Nuclear Information System (INIS)

Warns, M.; Schroeder, H.; Pfeil, W.; Rollnik, H.

1989-03-01

In this paper, we present numerical results for electroproduction amplitudes of proton resonances and electromagnetic nucleon form factors calculated in a relativized quark model. Interactions with both transversely and longitudinally polarized virtual photons were considered. Contributions of the different effects included in our approach have been analysed through a sample comparison with the available data. We also discuss the validity of the usual single-quark transition ansatz and possible parametrizations of the potential acting between the constituent quarks of the baryon. Impressive agreement is obtained with the nucleon form factor data up to squared momentum transfers of 2.5 GeV 2 , but still some problems remain with the Δ(1232) and higher resonances. (orig.)

Multivariate Tensor-based Brain Anatomical Surface Morphometry via Holomorphic One-Forms

OpenAIRE

Wang, Yalin; Chan, Tony F.; Toga, Arthur W.; Thompson, Paul M.

2009-01-01

Here we introduce multivariate tensor-based surface morphometry using holomorphic one-forms to study brain anatomy. We computed new statistics from the Riemannian metric tensors that retain the full information in the deformation tensor fields. We introduce two different holomorphic one-forms that induce different surface conformal parameterizations. We applied this framework to 3D MRI data to analyze hippocampal surface morphometry in Alzheimer’s Disease (AD; 26 subjects), lateral ventricula...

Modeling the degradation of a metallic waste form intended for geologic disposal

International Nuclear Information System (INIS)

Bauer, T.H.; Morris, E.E.

2007-01-01

Nuclear reactors operating with metallic fuels have led to development of robust metallic waste forms intended to immobilize hazardous constituents in oxidizing environments. Release data from a wide range of tests where small waste form samples have been immersed in a variety of oxidizing solutions have been analyzed and fit to a mechanistically-derived 'logarithmic growth' form for waste form degradation. A bounding model is described which plausibly extrapolates these fits to long-term degradation in a geologic repository. The resulting empirically-fit degradation model includes dependence on solution pH, temperature, and chloride concentration as well as plausible estimates of statistical uncertainty. (authors)

Allie: a database and a search service of abbreviations and long forms

Science.gov (United States)

Yamamoto, Yasunori; Yamaguchi, Atsuko; Bono, Hidemasa; Takagi, Toshihisa

2011-01-01

Many abbreviations are used in the literature especially in the life sciences, and polysemous abbreviations appear frequently, making it difficult to read and understand scientific papers that are outside of a reader’s expertise. Thus, we have developed Allie, a database and a search service of abbreviations and their long forms (a.k.a. full forms or definitions). Allie searches for abbreviations and their corresponding long forms in a database that we have generated based on all titles and abstracts in MEDLINE. When a user query matches an abbreviation, Allie returns all potential long forms of the query along with their bibliographic data (i.e. title and publication year). In addition, for each candidate, co-occurring abbreviations and a research field in which it frequently appears in the MEDLINE data are displayed. This function helps users learn about the context in which an abbreviation appears. To deal with synonymous long forms, we use a dictionary called GENA that contains domain-specific terms such as gene, protein or disease names along with their synonymic information. Conceptually identical domain-specific terms are regarded as one term, and then conceptually identical abbreviation-long form pairs are grouped taking into account their appearance in MEDLINE. To keep up with new abbreviations that are continuously introduced, Allie has an automatic update system. In addition, the database of abbreviations and their long forms with their corresponding PubMed IDs is constructed and updated weekly. Database URL: The Allie service is available at http://allie.dbcls.jp/. PMID:21498548

Applicability of perturbative QCD and NLO power corrections for the pion form factor

International Nuclear Information System (INIS)

Yeh Tsungwen

2002-01-01

As is well recognized, the asymptotic of the perturbative QCD prediction for the pion form factor is much smaller than the upper end of the data. We investigate this problem. We first evaluate the next-to-leading-order (NLO) power correction for the pion form factor. The corrected form factor contains nonperturbative parameters which are determined from a χ 2 fit to the data. Interpreting these parameters leads to the fact that the involved strong interaction coupling constant should be identified as an effective coupling constant under a nonperturbative QCD vacuum. If the scale associated with the effective coupling constant is identified as 2 Q 2 , then Q 2 , the momentum transfer square for the pion form factor to be measured, can have a value about 1 GeV 2 , and , the averaged momentum fraction variable, can locate around 0.5. This circumstance is consistent with the asymptotic model for the pion wave function

Testing the Weak Form Efficiency of Karachi Stock Exchange

Directory of Open Access Journals (Sweden)

Muhammad Arshad Haroon

2012-12-01

Full Text Available In an efficient market, share prices reflect all available information. The study of efficient market hypothesis helps to take right decisions related to investments. In this research,weak form efficiency has been tested of Karachi Stock Exchange—KSE covering the period of 2nd November 1991 to 2nd November 2011. Descriptive statistics indicated the absence of weak form efficiency while results of non-parametric tests, showed consistency as well. We employed non-parametric tests were KS Goodness-of-Fit test,run test and autocorrelation test to find out serial independency of the data. Results prove that KSE is not weak-form-efficient. This happens because KSE is an emerging market and there, it has been observed that information take time to be processed. Thus it can besaid that technical analysis may be applied to gain abnormal returns.

Some closed form expressions for the generalized secant integrals

International Nuclear Information System (INIS)

Nadarajah, Saralees

2007-01-01

The generalized secant integrals of the form I a (ψ,b)=b a ∫ 0 ψ exp(-bsecθ)(secθ) a dθ for b>0 and 0 a (ψ,b) have been known except when both a and ψ are fixed. In this note, we provide several closed form expressions for I a (ψ,b) applicable for a wide range of values of a and b. We establish their numerical accuracy over the methods presented in Michieli [1998. Point kernel calculations of dose fields from line sources using expanded polynomial form of buildup factor data: generalized secant integral series representations. Radiat. Phys. Chem. 51, 121-128; 2001. Some properties of generalized secant integrals: extended definition and recurrence relations. Radiat. Phys. Chem. 60, 551-554]. Finally, a simple computer program is provided for I a (ψ,b) that could be used widely

Pre-exposure to moving form enhances static form sensitivity.

Directory of Open Access Journals (Sweden)

Thomas S A Wallis

Full Text Available BACKGROUND: Motion-defined form can seem to persist briefly after motion ceases, before seeming to gradually disappear into the background. Here we investigate if this subjective persistence reflects a signal capable of improving objective measures of sensitivity to static form. METHODOLOGY/PRINCIPAL FINDINGS: We presented a sinusoidal modulation of luminance, masked by a background noise pattern. The sinusoidal luminance modulation was usually subjectively invisible when static, but visible when moving. We found that drifting then stopping the waveform resulted in a transient subjective persistence of the waveform in the static display. Observers' objective sensitivity to the position of the static waveform was also improved after viewing moving waveforms, compared to viewing static waveforms for a matched duration. This facilitation did not occur simply because movement provided more perspectives of the waveform, since performance following pre-exposure to scrambled animations did not match that following pre-exposure to smooth motion. Observers did not simply remember waveform positions at motion offset, since removing the waveform before testing reduced performance. CONCLUSIONS/SIGNIFICANCE: Motion processing therefore interacts with subsequent static visual inputs in a way that can improve performance in objective sensitivity measures. We suggest that the brief subjective persistence of motion-defined forms that can occur after motion offsets is a consequence of the decay of a static form signal that has been transiently enhanced by motion processing.

FORMS OF YOUTH TRAVEL

OpenAIRE

Moisã Claudia Olimpia; Moisã Claudia Olimpia

2011-01-01

Taking into account the suite of motivation that youth has when practicing tourism, it can be said that the youth travel takes highly diverse forms. These forms are educational tourism, volunteer programs and “work and travel”, cultural exchanges or sports tourism and adventure travel. In this article, we identified and analyzed in detail the main forms of youth travel both internationally and in Romania. We also illustrated for each form of tourism the specific tourism products targeting you...

Biowaiver Monographs for Immediate-Release Solid Oral Dosage Forms: Folic Acid.

Science.gov (United States)

Hofsäss, Martin A; Souza, Jacqueline de; Silva-Barcellos, Neila M; Bellavinha, Karime R; Abrahamsson, Bertil; Cristofoletti, Rodrigo; Groot, D W; Parr, Alan; Langguth, Peter; Polli, James E; Shah, Vinod P; Tajiri, Tomokazu; Mehta, Mehul U; Dressman, Jennifer B

2017-12-01

This work presents a review of literature and experimental data relevant to the possibility of waiving pharmacokinetic bioequivalence studies in human volunteers for approval of immediate-release solid oral pharmaceutical forms containing folic acid as the single active pharmaceutical ingredient. For dosage forms containing 5 mg folic acid, the highest dose strength on the World Health Organization Essential Medicines List, the dose/solubility ratio calculated from solubility studies was higher than 250 mL, corresponding to a classification as "not highly soluble." Small, physiological doses of folic acid (≤320 μg) seem to be absorbed completely via active transport, but permeability data for higher doses of 1-5 mg are inconclusive. Following a conservative approach, folic acid is classified as a Biopharmaceutics Classification System class IV compound until more reliable data become available. Commensurate with its solubility characteristics, the results of dissolution studies indicated that none of the folic acid products evaluated showed rapid dissolution in media at pH 1.2 or 4.5. Therefore, according to the current criteria of the Biopharmaceutics Classification System, the biowaiver approval procedure cannot be recommended for immediate-release solid oral dosage forms containing folic acid. Copyright © 2017 American Pharmacists Association®. All rights reserved.

78 FR 34154 - Reports, Forms, and Record Keeping Requirements

Science.gov (United States)

2013-06-06

..., mechanical, or other technological collection techniques or other forms of information technology, e.g... would be compared. The survey would be conducted primarily on-line, with the on-line technology serving... data applicable to these tasks, they do not tell the entire story. Attitudes, perceptions, knowledge...

Processing Terrain Point Cloud Data

KAUST Repository

DeVore, Ronald

2013-01-10

Terrain point cloud data are typically acquired through some form of Light Detection And Ranging sensing. They form a rich resource that is important in a variety of applications including navigation, line of sight, and terrain visualization. Processing terrain data has not received the attention of other forms of surface reconstruction or of image processing. The goal of terrain data processing is to convert the point cloud into a succinct representation system that is amenable to the various application demands. The present paper presents a platform for terrain processing built on the following principles: (i) measuring distortion in the Hausdorff metric, which we argue is a good match for the application demands, (ii) a multiscale representation based on tree approximation using local polynomial fitting. The basic elements held in the nodes of the tree can be efficiently encoded, transmitted, visualized, and utilized for the various target applications. Several challenges emerge because of the variable resolution of the data, missing data, occlusions, and noise. Techniques for identifying and handling these challenges are developed. © 2013 Society for Industrial and Applied Mathematics.

Giro form reading machine

Science.gov (United States)

Minh Ha, Thien; Niggeler, Dieter; Bunke, Horst; Clarinval, Jose

1995-08-01

Although giro forms are used by many people in daily life for money remittance in Switzerland, the processing of these forms at banks and post offices is only partly automated. We describe an ongoing project for building an automatic system that is able to recognize various items printed or written on a giro form. The system comprises three main components, namely, an automatic form feeder, a camera system, and a computer. These components are connected in such a way that the system is able to process a bunch of forms without any human interactions. We present two real applications of our system in the field of payment services, which require the reading of both machine printed and handwritten information that may appear on a giro form. One particular feature of giro forms is their flexible layout, i.e., information items are located differently from one form to another, thus requiring an additional analysis step to localize them before recognition. A commercial optical character recognition software package is used for recognition of machine-printed information, whereas handwritten information is read by our own algorithms, the details of which are presented. The system is implemented by using a client/server architecture providing a high degree of flexibility to change. Preliminary results are reported supporting our claim that the system is usable in practice.

Dilbit Data

Data.gov (United States)

U.S. Environmental Protection Agency — The data is in the form of degradation of hydrocarbons over time at two temperatures and the relative abundance of bacterial taxa identified in the microcosms. This...

Measurement and prediction of dabigatran etexilate mesylate Form II solubility in mono-solvents and mixed solvents

International Nuclear Information System (INIS)

Xiao, Yan; Wang, Jingkang; Wang, Ting; Ouyang, Jinbo; Huang, Xin; Hao, Hongxun; Bao, Ying; Fang, Wen; Yin, Qiuxiang

2016-01-01

Highlights: • Solubility of DEM Form II in mono-solvents and binary solvent mixtures was measured. • Regressed UNIFAC model was used to predict the solubility in solvent mixtures. • The experimental solubility data were correlated by different models. - Abstract: UV spectrometer method was used to measure the solubility data of dabigatran etexilate mesylate (DEM) Form II in five mono-solvents (methanol, ethanol, ethane-1,2-diol, DMF, DMAC) and binary solvent mixtures of methanol and ethanol in the temperature range from 287.37 K to 323.39 K. The experimental solubility data in mono-solvents were correlated with modified Apelblat equation, van’t Hoff equation and λh equation. GSM model and Modified Jouyban-Acree model were employed to correlate the solubility data in mixed solvent systems. And Regressed UNIFAC model was used to predict the solubility of DEM Form II in the binary solvent mixtures. Results showed that the predicted data were consistent with the experimental data.

Fine Coining of Bulk Metal Formed Parts in Digital Environment

International Nuclear Information System (INIS)

Pepelnjak, T.; Kuzman, K.; Krusic, V.

2007-01-01

At present the production of bulk metal formed parts in the automotive industry must increasingly fulfil demands for narrow tolerance fields. The final goal of the million parts production series is oriented towards zero defect production. This is possible by achieving production tolerances which are even tighter than the prescribed ones. Different approaches are used to meet this demanding objective affected by many process parameters. Fine coining as a final forming operation is one of the processes which enables the production of good manufacturing tolerances and high process stability. The paper presents the analyses of the production of the inner race and a digital evaluation of manufacturing tolerances caused by different material parameters of the workpiece. Digital optimisation of the fine coining with FEM simulations was performed in two phases. Firstly, fine coining of the inner racer in a digital environment was comparatively analysed with the experimental work in order to verify the accuracy and reliability of digitally calculated data. Secondly, based on the geometrical data of a digitally fine coined part, tool redesign was proposed in order to tighten production tolerances and increase the process stability of the near-net-shaped cold formed part

VizieR Online Data Catalog: Monoceros star-forming region radial velocities (Costado+ 2018)

Science.gov (United States)

Costado, M. T.; Alfaro, E. J.

2018-03-01

The compiled data of each star. The columns RV + catalogue number are taken from VizieR (references below) and the column WEBDA is the median value calculated using all measurements taken from WEBDA database (references below for each cluster). We also show our identification number (ID), HD and HIP number, the Equatorial coordinates, the RV median value, which we will use in the kinematic analysis, and the distance calculated by Astraatmadja & Bailer-Jones (2017) using Gaia parallax. (1 data file).

KUALITAS DATA IMUNISASI RUTIN BERDASARKAN METODE DATA QUALITY SELF ASSESSMENT (DQS

Directory of Open Access Journals (Sweden)

Ingan Tarigan

2012-09-01

Full Text Available Reporting and Recording System on immunization in Indonesia have been faced with many difficulties. Data quality and accuracy are the main problem that can be found in Puskesmas, District Health Office and also in Provincial Health Office. Usually, Health information system is limited on data collecting activity but not following by analyzing it. Therefore, this current system can't support/provide valuable (immunization information as needed by the stakeholders. This research was conducted in 3 provinces in Indonesia. Selected study areas were Lampung province (Metro city and Lampung Selatan district; West Java Province (Bogor city and Garut district, East Nusa Tenggara Province (Kupang city and Belu district. The objectives of this study were to assess the quality of recording and reporting system of immunization based on the DQS method Study design was cross-sectional. Assessment was carried out with Data Quality Self-Assessment (DQS method, using qualitative design by conducting interview and observation. Data quality of Immunization program was divided into 5 groups: recording, reporting, demography/denominator, availability of form, and data utilization. The assessment on DQS method showed that not all immunization services was reported by heath providers; data processed manually; archiving system was not well managed; lack of provided forms for recording and reporting forms; data was not reported in time; set up the immunization target was not standardized among areas (for every administrative levels; monitoring was  not conducted optimum to evaluate the performance of immunization program; and capacity building on human resources was urgently needed to improve the quality of immunization program.  Keywords: Immunization, Quality, DQS Method

Internal consistency, reliability, and temporal stability of the Oxford Happiness Questionnaire short-form: Test-retest data over two weeks

OpenAIRE

MCGUCKIN, CONOR

2006-01-01

PUBLISHED The Oxford Happiness Questionnaire short-form is a recently developed eight-item measure of happiness. This study evaluated the internal consistency reliability and test-retest reliability of the Oxford Happiness Questionnaire short-form among 55 Northern Irish undergraduate university students who completed the measure on two occasions separated by two weeks. Internal consistency of the measure on both occasions was satisfactory at both Time 1 (alpha = .62) and Time 2 (alpha = ....

Towards a dispersive determination of the pion transition form factor

Science.gov (United States)

Leupold, Stefan; Hoferichter, Martin; Kubis, Bastian; Niecknig, Franz; Schneider, Sebastian P.

2018-01-01

We start with a brief motivation why the pion transition form factor is interesting and, in particular, how it is related to the high-precision standard-model calculation of the gyromagnetic ratio of the muon. Then we report on the current status of our ongoing project to calculate the pion transition form factor using dispersion theory. Finally we present and discuss a wish list of experimental data that would help to improve the input for our calculations and/or to cross-check our results.

Towards a dispersive determination of the pion transition form factor

Directory of Open Access Journals (Sweden)

Leupold Stefan

2018-01-01

Full Text Available We start with a brief motivation why the pion transition form factor is interesting and, in particular, how it is related to the high-precision standard-model calculation of the gyromagnetic ratio of the muon. Then we report on the current status of our ongoing project to calculate the pion transition form factor using dispersion theory. Finally we present and discuss a wish list of experimental data that would help to improve the input for our calculations and/or to cross-check our results.

Dynamic positional fate map of the primary heart-forming region.

Science.gov (United States)

Cui, Cheng; Cheuvront, Tracey J; Lansford, Rusty D; Moreno-Rodriguez, Ricardo A; Schultheiss, Thomas M; Rongish, Brenda J

2009-08-15

Here we show the temporal-spatial orchestration of early heart morphogenesis at cellular level resolution, in vivo, and reconcile conflicting positional fate mapping data regarding the primary heart-forming field(s). We determined the positional fates of precardiac cells using a precision electroporation approach in combination with wide-field time-lapse microscopy in the quail embryo, a warm-blooded vertebrate (HH Stages 4 through 10). Contrary to previous studies, the results demonstrate the existence of a "continuous" circle-shaped heart field that spans the midline, appearing at HH Stage 4, which then expands to form a wide arc of progenitors at HH Stages 5-7. Our time-resolved image data show that a subset of these cardiac progenitor cells do not overlap with the expression of common cardiogenic factors, Nkx-2.5 and Bmp-2, until HH Stage 10, when a tubular heart has formed, calling into question when cardiac fate is specified and by which key factors. Sub-groups and anatomical bands (cohorts) of heart precursor cells dramatically change their relative positions in a process largely driven by endodermal folding and other large-scale tissue deformations. Thus, our novel dynamic positional fate maps resolve the origin of cardiac progenitor cells in amniotes. The data also establish the concept that tissue motion contributes significantly to cellular position fate - i.e., much of the cellular displacement that occurs during assembly of a midline heart tube (HH Stage 9) is NOT due to "migration" (autonomous motility), a commonly held belief. Computational analysis of our time-resolved data lays the foundation for more precise analyses of how cardiac gene regulatory networks correlate with early heart tissue morphogenesis in birds and mammals.

X-ray diffraction of slag-based sodium salt waste forms

Energy Technology Data Exchange (ETDEWEB)

Langton, C. A. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Missimer, D. M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

2014-09-30

The attached report documents sample preparation and x-ray diffraction results for a series of cement and blended cement matrices prepared with either water or a 4.4 M Na salt solution. The objective of the study was to provide initial phase characterization for the Cementitious Barriers Partnership reference case cementitious salt waste form. This information can be used to: 1) generate a base line for the evolution of the waste form as a function of time and conditions, 2) potentially to design new binders based on mineralogy of the binder, 3) understand and predict anion and cation leaching behavior of contaminants of concern, and 4) predict performance of the waste forms for which phase solubility and thermodynamic data are available.

Nucleon form factors, generalized parton distributions and quark angular momentum

Energy Technology Data Exchange (ETDEWEB)

Diehl, Markus [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Kroll, Peter [Bergische Univ., Wuppertal (Germany). Fachbereich Physik; Regensburg Univ. (Germany). Institut fuer Theoretische Physik

2013-02-15

We extract the individual contributions from u and d quarks to the Dirac and Pauli form factors of the proton, after a critical examination of the available measurements of electromagnetic nucleon form factors. From this data we determine generalized parton distributions for valence quarks, assuming a particular form for their functional dependence. The result allows us to study various aspects of nucleon structure in the valence region. In particular, we evaluate Ji's sum rule and estimate the total angular momentum carried by valence quarks at the scale {mu}=2 GeV to be J{sup u}{sub v}=0.230{sup +0.009}{sub -0.024} and J{sup d}{sub v}=-0.004{sup +0.010}{sub -0.016}.

Forms of Employee Trainings Concerning Aspects of Cold Knowledge

Directory of Open Access Journals (Sweden)

Komańda Marcin

2017-06-01

Full Text Available Research relevance: Cold knowledge is perceived as a key issue in terms of the composition of the company and the sense of the procedures being implemented. Thus, organisation of appropriate forms of employee trainings in this regard becomes essential. Aim of the paper: Distinguishing the existence of schemes of applied forms of employee trainings in the contexts of relation between two aspects of cold knowledge (internal documentation and data bases and the types of enterprises (their formal independence. Research methods applied: A survey based on the purposive sampling of respondents was conducted. A two-tiered clustering analysis and an analysis of correspondence were applied. Main findings: It was possible to distinguish four groups of particular forms of trainings. Three groups are represented by the same main forms of trainings in both cases (documentation/databases. The analysis of correspondence established that respondents from branches as well as head offices of multi-branch enterprises were, in case of trainings concerning internal documentation, more prone to point at two forms of trainings: blended and special, whereas, in case of training within the scope of databases, they were more willing to point at a special form of trainings. Theoretical and/or practical value of the study: Results allow to associate the forms of employee trainings in the chosen aspects of cold knowledge and show the differentiation of their use depending on the type of enterprise. These facts open up a new theoretical perspective for the description of organisation of employee trainings based on formal relations.`

Method for forming materials

Science.gov (United States)

Tolle, Charles R [Idaho Falls, ID; Clark, Denis E [Idaho Falls, ID; Smartt, Herschel B [Idaho Falls, ID; Miller, Karen S [Idaho Falls, ID

2009-10-06

A material-forming tool and a method for forming a material are described including a shank portion; a shoulder portion that releasably engages the shank portion; a pin that releasably engages the shoulder portion, wherein the pin defines a passageway; and a source of a material coupled in material flowing relation relative to the pin and wherein the material-forming tool is utilized in methodology that includes providing a first material; providing a second material, and placing the second material into contact with the first material; and locally plastically deforming the first material with the material-forming tool so as mix the first material and second material together to form a resulting material having characteristics different from the respective first and second materials.

Analysis of iodine chemical form noted from severe fuel damage experiments

International Nuclear Information System (INIS)

Cronenberg, A.W.; Osetek, D.J.

1986-01-01

Data from the TMI-2 accident has shown that only small amounts of iodine (I) escaped the plant. The postulated reason for such limited release is the formation of CsI (a salt) within fuel, which remains stable in a reducing high-temperature steam-H 2 environment. Upon cooldown CsI would dissolve in water condensate to form an ionic solution. However, recent data from fuel destruction experiments indicate different iodine release behavior that is tied to fuel burnup and oxidation conditions, as well as fission product concentration levels in the steam/H 2 effluent. Analysis of the data indicate that at low-burnup conditions, atomic I release from fuel is favored. Likewise, at low fission product concentration conditions HI is the favored chemical form in the steam/H 2 environment, not CsI. Results of thermochemical equilibria and chemical kinetics analysis support the data trends noted from the PBF-SFD tests. An a priori assumption of CsI for risk analysis of all accident sequences may therefore be inappropriate

New EDH declaration form concerning dependent children aged 18 to 25

CERN Multimedia

HR Department

2006-01-01

As part of the ongoing simplification of procedures and rationalisation of administrative formalities, the HR and IT Departments have designed and developed a new EDH form for declaring the situation of dependent children aged 18 to 25. This new electronic form, which will be brought on line during the month of July, will make it easier for members of the personnel to enter and send data as well as allowing the HR Department to optimise its administrative follow-up. Members of the personnel required to complete a declaration form will receive an individual e-mail notification containing a link to the EDH form and useful information on the procedure to be followed. Human Resources Department, Organisation, Procedures and Services Group, School Fees Service Information Technology Department, AIS (Administrative Information Services)

The pion form factor within the hidden local symmetry model

International Nuclear Information System (INIS)

Benayoun, M.; David, P.; DelBuono, L.; Leruste, P.; O'Connell, H.B.

2003-01-01

We analyze a pion form factor formulation which fulfills the Analyticity requirement within the Hidden Local Symmetry (HLS) Model. This implies an s-dependent dressing of the ρ-γ VMD coupling and an account of several coupled channels. The corresponding function F π (s) provides nice fits of the pion form factor data from s=-0.25 to s=1 GeV 2 . It is shown that the coupling to KK has little effect, while ωπ 0 improves significantly the fit probability below the φ mass. No need for additional states like ρ(1450) shows up in this invariant-mass range. All parameters, except for the subtraction polynomial coefficients, are fixed from the rest of the HLS phenomenology. The fits show consistency with the expected behaviour of F π (s) at s=0 up to O(s 2 ) and with the phase shift data on δ 1 1 (s) from threshold to somewhat above the φ mass. The ω sector is also examined in relation with recent data from CMD-2. (orig.)

Evaluation and review of alternative waste forms for immobilization of high level radioactive wastes. Report number 3

International Nuclear Information System (INIS)

1981-01-01

A discussion of the relative strengths and weaknesses of the alternative forms and recommendations for future program directions are presented in the body of this report. In addition to the relative ranking, the Peer Review Panel makes the following observations and recommendations: (1) Differences in overall performance of most of the uncoated waste forms are relatively small when compared under approximately equivalent conditions. (2) The increased scientific basis for this class of waste forms has not yet been sufficient to achieve reliably large improvements in waste form performance over the best borosilicate glasses. (3) The increased leach rates at elevated temperatures and the uncertainty regarding mechanisms of leaching under repository conditions continue to indicate that surface temperatures of waste canisters and especially any waste form-water interfaces should be restricted to less than 100 0 C, until more data is available to indicate otherwise. (4) Improvements are noteworthy, but there is still a need for adopting additional standardized tests, standard reference materials, common units and standardized methods of data presentation in the nuclear waste program. (5) Comparative data on leach rates in waters equilibrated with candidate rocks and potential geologic environments are almost non-existent and are essential to establish relevant long term extrapolation of waste form performance.(6) Understanding radiation damage effects on the microstructure and leaching mechanisms of polycrystalline ceramics is still insufficient to judge long term reliability of this class of waste forms. (7) More extensive data on rates and mechanisms of leaching of all waste forms under radiation and repository conditions are needed. (8) Additional studies of fundamental mechanisms controlling long term reliability of glass and alternative waste forms are strongly encouraged

Effluent Management Facility Evaporator Bottom-Waste Streams Formulation and Waste Form Qualification Testing

Energy Technology Data Exchange (ETDEWEB)

Saslow, Sarah A.; Um, Wooyong; Russell, Renee L.

2017-08-02

This report describes the results from grout formulation and cementitious waste form qualification testing performed by Pacific Northwest National Laboratory (PNNL) for Washington River Protection Solutions, LLC (WRPS). These results are part of a screening test that investigates three grout formulations proposed for wide-range treatment of different waste stream compositions expected for the Hanford Effluent Management Facility (EMF) evaporator bottom waste. This work supports the technical development need for alternative disposition paths for the EMF evaporator bottom wastes and future direct feed low-activity waste (DFLAW) operations at the Hanford Site. High-priority activities included simulant production, grout formulation, and cementitious waste form qualification testing. The work contained within this report relates to waste form development and testing, and does not directly support the 2017 Integrated Disposal Facility (IDF) performance assessment (PA). However, this work contains valuable information for use in PA maintenance past FY 2017 and future waste form development efforts. The provided results and data should be used by (1) cementitious waste form scientists to further the understanding of cementitious leach behavior of contaminants of concern (COCs), (2) decision makers interested in off-site waste form disposal, and (3) the U.S. Department of Energy, their Hanford Site contractors and stakeholders as they assess the IDF PA program at the Hanford Site. The results reported help fill existing data gaps, support final selection of a cementitious waste form for the EMF evaporator bottom waste, and improve the technical defensibility of long-term waste form risk estimates.

A numerical analysis on forming limits during spiral and concentric single point incremental forming

Science.gov (United States)

Gipiela, M. L.; Amauri, V.; Nikhare, C.; Marcondes, P. V. P.

2017-01-01

Sheet metal forming is one of the major manufacturing industries, which are building numerous parts for aerospace, automotive and medical industry. Due to the high demand in vehicle industry and environmental regulations on less fuel consumption on other hand, researchers are innovating new methods to build these parts with energy efficient sheet metal forming process instead of conventionally used punch and die to form the parts to achieve the lightweight parts. One of the most recognized manufacturing process in this category is Single Point Incremental Forming (SPIF). SPIF is the die-less sheet metal forming process in which the single point tool incrementally forces any single point of sheet metal at any process time to plastic deformation zone. In the present work, finite element method (FEM) is applied to analyze the forming limits of high strength low alloy steel formed by single point incremental forming (SPIF) by spiral and concentric tool path. SPIF numerical simulations were model with 24 and 29 mm cup depth, and the results were compare with Nakajima results obtained by experiments and FEM. It was found that the cup formed with Nakajima tool failed at 24 mm while cups formed by SPIF surpassed the limit for both depths with both profiles. It was also notice that the strain achieved in concentric profile are lower than that in spiral profile.

Data bank for a data retrieval system

Energy Technology Data Exchange (ETDEWEB)

Vernikovskii, V V

1980-01-01

The data bank of the computerized data retrieval system is an organic and constituent part of the system; the level of technology and performance of the data retrieval system as a whole depend on the results of its design and operation. The data bank integrates a storage system for the entire set of data, as well as implementing an organization of a feasible storage mode for the system dictionary, computer processing procedures, user forms, system archieves and other service information. Functions of the data bank are computerized by means of a database control system. The retriveal system data bank was designed for the OKA database control system; the selection and evaluation of the feasibility of the OKA database control system, in turn, were one stage in the design of the system as a whole. The OKA database control system has been used to computerize data retrieval functions in the computerized data retrieval system, and also to maintain the system data bank in updated status.

Reliability and maintainability data acquisition in equipment development tests

International Nuclear Information System (INIS)

Haire, M.J.; Gift, E.H.

1983-10-01

The need for collection of reliability, maintainability, and availability data adds a new dimension to the data acquisition requirements of equipment development tests. This report describes the reliability and maintainability data that are considered necessary to ensure that sufficient and high quality data exist for a comprehensive, quantitative evaluation of equipment and system availability. These necessary data are presented as a set of data collection forms. Three data acquisition forms are discussed: an inventory and technical data form, which is filed by the design engineer when the design is finished or the equipment is received; an event report form, which is completed by the senior test operator at each shutdown; and a maintainability report, which is a collaborative effort between senior operators and lead engineers and is completed on restart. In addition, elements of a reliability, maintainability evaluation program are described. Emphasis is placed on the role of data, its storage, and use in such a program

Tuberculosis and parenteral viral hepatitides: incidence of mixed forms

Directory of Open Access Journals (Sweden)

A. A. Asratyan

2014-01-01

Full Text Available Objective: to estimate the frequency of parenteral viral hepatitides (HB and HC (PVH in patients with tuberculosis in Moscow in relation to data on their incidence in the aggregate population of the capital.Materials and methods. The authors analyzed the incidence of (acute, chronic HB and HC (carriage and tuberculosis in Moscow in 2009. A total of 24,220 cards for infectious patients (No. 089/y and federal statistical follow-up forms (No. 2 were first processed to compare and search for personal data among the patients with tuberculosis and all forms of PVH and to establish the evidence of PVH and tuberculosis comorbidity.Results. The infection of tuberculosis patients with parenteral hepatitis B and C viruses was ascertained to be 5.5 to 284.9 times higher (in relation to the form of a hepatitis course than that in the aggregation population of Moscow, which suggests that PVH is of high significance for the tuberculosis patients and that it is necessary to improve a PVH prevention program among this cohort patients. Analysis of the sex-age structure shows that male tuberculosis patients in the 20-39-year-old group should be considered to be a special risk group that should attract special attention when implementing preventive measures. The tuberculosis mortality rate among mixed infected patients was 1.8-fold higher than among those who had PVH-uncomplicated tuberculosis.Conclusion. The results of the investigations are suggestive of the evidence of PVH and tuberculosis comorbidity. The mixed forms of these infections in different combinations have been established to be accompanied by their severer clinical course and high death rates. 

Adaptive Municipal e-forms

NARCIS (Netherlands)

Kuiper, P.M.; van Dijk, Elisabeth M.A.G.; Boerma, A.K.; Weibelzahl, S.; Cristea, A.

2006-01-01

Adaptation of electronic forms seems to be a step forward to reduce the burden for people who fill in forms. Municipalities more and more offer eforms online that can be used to request a municipal product or service. To create adaptive e-forms that satisfy the need of end-users, involvement of

IDES: Interactive Data Entry System: a generalized data acquisition software package

International Nuclear Information System (INIS)

Gasser, S.B.

1980-04-01

The Interactive Data Entry System (IDES) is a software package which greatly assists in designing and storing forms to be used for the directed acquisition of data. Objective of this package is to provide a viable man/machine interface to any comprehensive data base. This report provides a technical description of the software and can be used as a user's manual

Analysis of successive data sets

NARCIS (Netherlands)

Spreeuwers, Lieuwe Jan; Breeuwer, Marcel; Haselhoff, Eltjo Hans

2008-01-01

The invention relates to the analysis of successive data sets. A local intensity variation is formed from such successive data sets, that is, from data values in successive data sets at corresponding positions in each of the data sets. A region of interest is localized in the individual data sets on

Analysis of successive data sets

NARCIS (Netherlands)

Spreeuwers, Lieuwe Jan; Breeuwer, Marcel; Haselhoff, Eltjo Hans

2002-01-01

The invention relates to the analysis of successive data sets. A local intensity variation is formed from such successive data sets, that is, from data values in successive data sets at corresponding positions in each of the data sets. A region of interest is localized in the individual data sets on

Statistical data analysis

International Nuclear Information System (INIS)

Hahn, A.A.

1994-11-01

The complexity of instrumentation sometimes requires data analysis to be done before the result is presented to the control room. This tutorial reviews some of the theoretical assumptions underlying the more popular forms of data analysis and presents simple examples to illuminate the advantages and hazards of different techniques

Processing Terrain Point Cloud Data

KAUST Repository

DeVore, Ronald; Petrova, Guergana; Hielsberg, Matthew; Owens, Luke; Clack, Billy; Sood, Alok

2013-01-01

Terrain point cloud data are typically acquired through some form of Light Detection And Ranging sensing. They form a rich resource that is important in a variety of applications including navigation, line of sight, and terrain visualization

SuperFormLab: showing SuperFormLab

DEFF Research Database (Denmark)

2013-01-01

bachelor program, followed by two years of master studies. The courses are offered equally to students from other design disciplines, e.g. industrial design. Teaching is mainly in English as the program is attended by a relatively large group of non-Danish students, who seek exactly this combination......3D-printing in clay and ceramic objects shaped by your own sounds and movements! Digital form transferred via CNC-milling to ornamental ceramic wall-cladding. Brave New World… Students and their teacher at SuperFormLab, the new ceramic workshop of the School of Design at the Royal Danish Academy...... of Fine Arts in Copenhagen, will be showing results of their investigations into the potential of combining digital technologies with ceramic materials. It is now possible to shape the most complex mathematical, virtual 3D objects through the use of advanced software-programs. And more than that – you can...

Electromagnetic form factors of the ρ meson in light cone QCD sum rules

International Nuclear Information System (INIS)

Aliev, T.M.; Savci, M.

2004-01-01

We investigate the electromagnetic form factors of the ρ meson in light cone QCD sum rules. We find that the ratio of the magnetic and charge form factors is larger than 2 at all values of Q 2 (Q 2 ≥0.5 GeV 2 ). The values of the individual form factors at fixed values of Q 2 predicted by the light cone QCD sum rules are quite different compared to the results of other approaches. These results can be checked in the future, when more precise data on ρ meson form factors is available

Technopolitics in the Age of Big Data

NARCIS (Netherlands)

Milan, S.; Gutierrez, M.; Sierra Caballero, F.; Gravante, T.

2018-01-01

Data activism represents a form of technopolitics from the ground-up, which sees people’s active engagement with technologies for empowerment, equal participation and action, and has been able to challenge the traditional way of understanding and doing politics. We distinguish two forms of data

Method for forming ammonia

Science.gov (United States)

Kong, Peter C.; Pink, Robert J.; Zuck, Larry D.

2008-08-19

A method for forming ammonia is disclosed and which includes the steps of forming a plasma; providing a source of metal particles, and supplying the metal particles to the plasma to form metal nitride particles; and providing a substance, and reacting the metal nitride particles with the substance to produce ammonia, and an oxide byproduct.

[Internet addiction? A new form of behavioral dependence?].

Science.gov (United States)

Triffaux, J-M; Desert, J-B; Lakaye, A

2013-01-01

The speed of development of new technologies of information and communication (I.C.T.) modified the mode of our intersubjective relations leading certain individuals to develop new forms of behavioral dependence. If the majority of the users consume the Internet with moderation, 1 to 2% of the general population would suffer from "problematic use of the Internet" and /or of "lnternet addiction". These figures are to be taken with caution because of the lack of reliable epidemiologic data. If, beside the classical forms of addictions to the psychoactive substances, the concept of "addictions without drugs" is more and more the subject of scientific works, it is appropriate, however, not to call pathological all these new behaviours. We will approach in this article the clinical reality related to the problematic or abusive use of new technologies with or without the Internet. We will then describe the possible therapeutic approaches that is ambulatory or in the form of day-hospitalization. Lastly, we will conclude with some recommendations to the attention of the relatives or the close friends.

Forms of global governence

Directory of Open Access Journals (Sweden)

Maxim V. Kharkevich

2014-01-01

Full Text Available Global governance as a concept defines the meaning of contemporary world politics both as a discipline and as reality. Interdependent and globalized world requires governance, and a global government has not been formed yet. The theoretical possibility of global governance without global government is proved and justified. The purpose of this article is to analytically identify possible forms of global governance. Three such forms of global governance are identified: hierarchical, market and network. In a hierarchy the governance is due to the asymmetry of power between the parties. Market control happens via anonymous pricing mechanism. Network, in contrast to the market is characterized by a closer value link between the actors, but unlike the hierarchical relationship actors are free to leave the network. Global governance takes three forms and is being implemented by different actors. To determine the most efficient form of global governance is impossible. Efficiency depends on the match between a form and an object of government. It should be noted that meta governance is likely to remain a monopoly of institutionally strong states in global governance.

Renal cells express different forms of vimentin: the independent expression alteration of these forms is important in cell resistance to osmotic stress and apoptosis.

Directory of Open Access Journals (Sweden)

Bettina S Buchmaier

Full Text Available Osmotic stress has been shown to regulate cytoskeletal protein expression. It is generally known that vimentin is rapidly degraded during apoptosis by multiple caspases, resulting in diverse vimentin fragments. Despite the existence of the known apoptotic vimentin fragments, we demonstrated in our study the existence of different forms of vimentin VIM I, II, III, and IV with different molecular weights in various renal cell lines. Using a proteomics approach followed by western blot analyses and immunofluorescence staining, we proved the apoptosis-independent existence and differential regulation of different vimentin forms under varying conditions of osmolarity in renal cells. Similar impacts of osmotic stress were also observed on the expression of other cytoskeleton intermediate filament proteins; e.g., cytokeratin. Interestingly, 2D western blot analysis revealed that the forms of vimentin are regulated independently of each other under glucose and NaCl osmotic stress. Renal cells, adapted to high NaCl osmotic stress, express a high level of VIM IV (the form with the highest molecular weight, besides the three other forms, and exhibit higher resistance to apoptotic induction with TNF-α or staurosporin compared to the control. In contrast, renal cells that are adapted to high glucose concentration and express only the lower-molecular-weight forms VIM I and II, were more susceptible to apoptosis. Our data proved the existence of different vimentin forms, which play an important role in cell resistance to osmotic stress and are involved in cell protection against apoptosis.

Methods of forming single source precursors, methods of forming polymeric single source precursors, and single source precursors formed by such methods

Science.gov (United States)

Fox, Robert V.; Rodriguez, Rene G.; Pak, Joshua J.; Sun, Chivin; Margulieux, Kelsey R.; Holland, Andrew W.

2014-09-09

Methods of forming single source precursors (SSPs) include forming intermediate products having the empirical formula 1/2{L.sub.2N(.mu.-X).sub.2M'X.sub.2}.sub.2, and reacting MER with the intermediate products to form SSPs of the formula L.sub.2N(.mu.-ER).sub.2M'(ER).sub.2, wherein L is a Lewis base, M is a Group IA atom, N is a Group IB atom, M' is a Group IIIB atom, each E is a Group VIB atom, each X is a Group VIIA atom or a nitrate group, and each R group is an alkyl, aryl, vinyl, (per)fluoro alkyl, (per)fluoro aryl, silane, or carbamato group. Methods of forming polymeric or copolymeric SSPs include reacting at least one of HE.sup.1R.sup.1E.sup.1H and MER with one or more substances having the empirical formula L.sub.2N(.mu.-ER).sub.2M'(ER).sub.2 or L.sub.2N(.mu.-X).sub.2M'(X).sub.2 to form a polymeric or copolymeric SSP. New SSPs and intermediate products are formed by such methods.

Data Bank 10 - Form 41 Financial Schedules of U.S. Air Carriers : first quarter.

Science.gov (United States)

2014-01-01

This CD presents financial data for large certificated U.S. carriers. Schedule B-1 presents the balance sheets of the carrier's accounting reports. Schedules P-1 and P-6 contain profit and loss data (income and expense items) for the carrier's operat...

Data Bank 10 - Form 41 Financial Schedules of U.S. Air Carriers : second quarter.

Science.gov (United States)

2013-01-01

This CD presents financial data for large certificated U.S. carriers. Schedule B-1 presents the balance sheets of the carrier's accounting reports. Schedules P-1 and P-6 contain profit and loss data (income and expense items) for the carrier's operat...

Data Bank 10 - Form 41 Financial Schedules of U.S. Air Carriers : fourth quarter.

Science.gov (United States)

2013-01-01

This CD presents financial data for large certificated U.S. carriers. Schedule B-1 presents the balance sheets of the carrier's accounting reports. Schedules P-1 and P-6 contain profit and loss data (income and expense items) for the carrier's operat...

Data Bank 10 - Form 41 Financial Schedules of U.S. Air Carriers : third quarter.

Science.gov (United States)

2013-01-01

This CD presents financial data for large certificated U.S. carriers. Schedule B-1 presents the balance sheets of the carrier's accounting reports. Schedules P-1 and P-6 contain profit and loss data (income and expense items) for the carrier's operat...

Data Bank 10 - Form 41 Financial Schedules of U.S. Air Carriers : second quarter.

Science.gov (United States)

2010-01-01

This CD presents financial data for large certificated U.S. carriers. Schedule B-1 presents the balance sheets of the carrier's accounting reports. Schedules P-1 and P-6 contain profit and loss data (income and expense items) for the carrier's operat...

Data Bank 10 - Form 41 Financial Schedules of U.S. Air Carriers : fourth quarter.

Science.gov (United States)

2011-01-01

This CD presents financial data for large certificated U.S. carriers. Schedule B-1 presents the balance sheets of the carrier's accounting reports. Schedules P-1 and P-6 contain profit and loss data (income and expense items) for the carrier's operat...

Data Bank 10 - Form 41 Financial Schedules of U.S. Air Carriers : first quarter.

Science.gov (United States)

2009-01-01

This CD presents financial data for large certificated U.S. carriers. Schedule B-1 presents the balance sheets of the carrier's accounting reports. Schedules P-1 and P-6 contain profit and loss data (income and expense items) for the carrier's operat...

Negative events and their potential risk of precipitating pathological forms of dental anxiety

NARCIS (Netherlands)

Oosterink, F.M.D.; de Jongh, A.; Aartman, I.H.A.

2009-01-01

The purpose of the present study was to assess which types of experiences are most closely associated with pathological forms of dental anxiety. Data came from a sample of dental patients (n = 1462). Pathological dental anxiety was operationalized in two ways: (1) a score of ≥36 on the Short form of

Monitoring and evaluation of wire mesh forming life

Science.gov (United States)

Enemuoh, Emmanuel U.; Zhao, Ping; Kadlec, Alec

2018-03-01

Forming tables are used with stainless steel wire mesh conveyor belts to produce variety of products. The forming tables will typically run continuously for several days, with some hours of scheduled downtime for maintenance, cleaning and part replacement after several weeks of operation. The wire mesh conveyor belts show large variation in their remaining life due to associated variations in their nominal thicknesses. Currently the industry is dependent on seasoned operators to determine the replacement time for the wire mesh formers. The drawback of this approach is inconsistency in judgements made by different operators and lack of data knowledge that can be used to develop decision making system that will be more consistent with wire mesh life prediction and replacement time. In this study, diagnostic measurements about the health of wire mesh former is investigated and developed. The wire mesh quality characteristics considered are thermal measurement, tension property, gage thickness, and wire mesh wear. The results show that real time thermal sensor and wear measurements would provide suitable data for the estimation of wire mesh failure, therefore, can be used as a diagnostic parameter for developing structural health monitoring (SHM) system for stainless steel wire mesh formers.

U-Form vs. M-Form: How to Understand Decision Autonomy Under Healthcare Decentralization?

Science.gov (United States)

Bustamante, Arturo Vargas

2016-01-01

For more than three decades healthcare decentralization has been promoted in developing countries as a way of improving the financing and delivery of public healthcare. Decision autonomy under healthcare decentralization would determine the role and scope of responsibility of local authorities. Jalal Mohammed, Nicola North, and Toni Ashton analyze decision autonomy within decentralized services in Fiji. They conclude that the narrow decision space allowed to local entities might have limited the benefits of decentralization on users and providers. To discuss the costs and benefits of healthcare decentralization this paper uses the U-form and M-form typology to further illustrate the role of decision autonomy under healthcare decentralization. This paper argues that when evaluating healthcare decentralization, it is important to determine whether the benefits from decentralization are greater than its costs. The U-form and M-form framework is proposed as a useful typology to evaluate different types of institutional arrangements under healthcare decentralization. Under this model, the more decentralized organizational form (M-form) is superior if the benefits from flexibility exceed the costs of duplication and the more centralized organizational form (U-form) is superior if the savings from economies of scale outweigh the costly decision-making process from the center to the regions. Budgetary and financial autonomy and effective mechanisms to maintain local governments accountable for their spending behavior are key decision autonomy variables that could sway the cost-benefit analysis of healthcare decentralization. PMID:27694684

Rapidly-administered short forms of the Wechsler Adult Intelligence Scale-3rd edition.

Science.gov (United States)

Donnell, Alison J; Pliskin, Neil; Holdnack, James; Axelrod, Bradley; Randolph, Christopher

2007-11-01

Although the Wechsler Full Scale IQ (FSIQ) is a common component of most neuropsychological evaluations, there are many clinical situations where the complete administration of this battery is precluded by various constraints, including limitations of time and patient compliance. These constraints are particularly true for dementia evaluations involving elderly patients. The present study reports data on two short forms particularly suited to dementia evaluations, each requiring less than 20min of administration time. One of the short forms was previously validated in dementia for the WAIS-R [Randolph, C., Mohr, E., & Chase, T. N. (1993). Assessment of intellectual function in dementing disorders: Validity of WAIS-R short forms for patients with Alzheimer's, Huntington's, and Parkinson's disease. Journal of Clinical and Experimental Neuropsychology, 15, 743-753]; the second was developed specifically for patients with motor disabilities. These short forms were validated using the WAIS-III normative standardization sample (N=2450), neurologic sample (N=63), and matched controls (N=49), and a separate mixed clinical sample (N=70). The results suggest that each short form provides an accurate and reliable estimate of WAIS-III FSIQ, validating their use in appropriate clinical contexts. The present data support the use of these short forms for dementia evaluations, and suggests that they may be applicable for the evaluation of other neurological and neuropsychiatric disorders that involve acquired neurocognitive impairment.

On the Impact of Inhomogeneities in Meteorological Data on VLBI Data Analysis

Science.gov (United States)

Balidakis, Kyriakos; Heinkelmann, Robert; Phogat, Apurva; Soja, Benedikt; Glaser, Susanne; Nilsson, Tobias; Karbon, Maria; Schuh, Harald

2016-12-01

In this study, we address the issue of the quality of meteorological data employed for VLBI data analysis. We use data from six numerical weather models (NWMs) to form references on which the homogenization process is based. We explore the impact of the choice of NWM as well as the way to extract data from it. Among our findings is that data from the surface fields of NWMs are not suitable for either geodetic analysis or homogenization efforts, whether they are in their original form or after they have been compensated for the height difference between the orography of the NWM and the actual elevation. The reason lies in the fact that for 77% of the VLBI stations a height bias larger than 2.5 mm appears, as well as an average bias in the zenith wet delay estimates of 12.2 mm. Should the proposed extraction approach be followed, the difference between operational and reanalysis NWMs is not significant for such an application. Our conclusions are based on the analysis of VLBI data over 13 years.

Forming of superplastic ceramics

Energy Technology Data Exchange (ETDEWEB)

Lesuer, D.R.; Wadsworth, J.; Nieh, T.G.

1994-05-01

Superplasticity in ceramics has now advanced to the stage that technologically viable superplastic deformation processing can be performed. In this paper, examples of superplastic forming and diffusion bonding of ceramic components are given. Recent work in biaxial gas-pressure forming of several ceramics is provided. These include yttria-stabilized, tetragonal zirconia (YTZP), a 20% alumina/YTZP composite, and silicon. In addition, the concurrent superplastic forming and diffusion bonding of a hybrid ceramic-metal structure are presented. These forming processes offer technological advantages of greater dimensional control and increased variety and complexity of shapes than is possible with conventional ceramic shaping technology.

Measuring the Thermophysical and Structural Properties of Glass-Forming and Quasicrystal-Forming Liquids

Science.gov (United States)

Hyers, Robert W.; Bradshaw, Richard C.; Rogers, Jan R.; Gangopadhyay, Anup K.; Kelton, Ken F.

2006-01-01

The thermophysical properties of glass-forming and quasicrystal-forming alloys show many interesting features in the undercooled liquid range. Some of the features in the thermophysical property curves are expected to reflect changes in the structure and coordination of the liquid. These measurements require containerless processing such as electrostatic levitation to access the undercooled liquid regime. An overview of the state of the art in measuring the thermophysical properties and structure of undercooled liquid glass-forming and quasicrystal-forming alloys will be presented, along with the status of current measurements.

Fundamental Thermodynamics of Actinide-Bearing Mineral Waste Forms

International Nuclear Information System (INIS)

Williamson, Mark A.; Ebbinghaus, Bartley B.; Navrotsky, Alexandria

1999-01-01

The recent arms reduction treaties between the U.S. and Russia have resulted in inventories of plutonium in excess of current defense needs. Storage of this material poses significant, and unnecessary, risks of diversion, especially for Russia whose infrastructure for protecting these materials has been weakened since the collapse of the Soviet Union. Moreover, maintaining and protecting these materials in their current form is costly. The United States has about sixty metric tons of excess plutonium, half of which is high-purity weapon material. This high purity material will be converted into mixed oxide (MOX) fuel for use in nuclear reactors. The less pure excess plutonium does not meet the specifications for MOX fuel and will not be purified to meet the fuel specifications. Instead, it will be immobilized directly in a ceramic. The ceramic will be encased in a high level waste (HLW) glass monolith (i.e., the can-in-canister option) thus making a form that simulates the intrinsic security of spent nuclear fuel. The immobilized product will be placed in a HLW repository. To meet the repository requirements, the product must be shown to be durable for the intended storage time, the host matrix must be stable in the radiation environment, the solubility and leaching characteristics of the plutonium in the host material must be established, and optimum processing parameters must be determined for the entire compositional envelope of feed materials. In order to provide technically sound solutions to these issues, thermodynamic data are essential in developing an understanding of the chemistry and phase equilibria of the actinide-bearing mineral waste forms proposed as immobilization matrices. However, the relevant thermodynamic data (e.g., enthalpy, entropy, and heat capacity) for the ceramic forms are severely lacking and this information gap directly affects the Energy Department's ability to license the disposal matrices and methods. High-temperature solution

Effect of multiple forming tools on geometrical and mechanical properties in incremental sheet forming

Science.gov (United States)

Wernicke, S.; Dang, T.; Gies, S.; Tekkaya, A. E.

2018-05-01

The tendency to a higher variety of products requires economical manufacturing processes suitable for the production of prototypes and small batches. In the case of complex hollow-shaped parts, single point incremental forming (SPIF) represents a highly flexible process. The flexibility of this process comes along with a very long process time. To decrease the process time, a new incremental forming approach with multiple forming tools is investigated. The influence of two incremental forming tools on the resulting mechanical and geometrical component properties compared to SPIF is presented. Sheets made of EN AW-1050A were formed to frustums of a pyramid using different tool-path strategies. Furthermore, several variations of the tool-path strategy are analyzed. A time saving between 40% and 60% was observed depending on the tool-path and the radii of the forming tools while the mechanical properties remained unchanged. This knowledge can increase the cost efficiency of incremental forming processes.

Showmaker-Levy 9 and plume-forming collisions on Earth

Energy Technology Data Exchange (ETDEWEB)

Boslough, M.B.E.; Crawford, D.A.

1995-12-31

Computational models for the July, 1994 collision of comet Shoemaker-Levy 9 with Jupiter have provided a framework for interpreting the observational data. Imaging, photometry, and spectroscopy data from ground-based, Hubble Space Telescope, and Galileo spacecraft instruments are consistent with phenomena that were dominated by the generation of incandescent fireballs that were ballistically ejected to high altitudes, where they formed plumes that subsequently collapsed over large areas of Jupiter`s atmosphere. Applications of similar computational models to collisions into Earth`s atmosphere show that a very similar sequence of events should take place for NEO impacts with energies as low as 3 megatons, recurring on 100 year timescales or less. This result suggests that the 1908 Tunguska event was a plume-forming atmospheric explosion, and that some of the phenomena associated with it might be related to the ejection and collapse of a high plume. Hazards associated with plume growth and collapse should be included in the evaluation of the impact threat to Earth, and opportunities should be sought for observational validation of atmospheric impact models by exploiting data already being collected from the natural flux of multi-kiloton to megaton sized objects that constantly enter Earth`s atmosphere on annual to decadal timescales.

Differential Forms: A New Tool in Economics

Science.gov (United States)

Mimkes, Jürgen

Econophysics is the transfer of methods from natural to socio-economic sciences. This concept has first been applied to finance1, but it is now also used in various applications of economics and social sciences [2,3]. The present paper focuses on problems in macro economics and growth. 1. Neoclassical theory [4, 5] neglects the “ex post” property of income and growth. Income Y(K, L) is assumed to be a function of capital and labor. But functions cannot model the “ex post” character of income. 2. Neoclassical theory is based on a Cobb Douglas function [6] with variable elasticity α, which may be fitted to economic data. But an undefined elasticity α leads to a descriptive rather than a predictive economic theory. The present paper introduces a new tool - differential forms and path dependent integrals - to macro economics. This is a solution to the problems above: 1. The integral of not exact differential forms is path dependent and can only be calculated “ex post” like income and economic growth. 2. Not exact differential forms can be made exact by an integrating factor, this leads to a new, well defined, unique production function F and a predictive economic theory.

Separating form factor and nuclear model effects in quasielastic neutrino-nucleus scattering

Science.gov (United States)

Wieske, Joseph

2017-09-01

When studying neutrino oscillations an understanding of charged current quasielastic (CCQE) neutrino-nucleus scattering is imperative. This interaction depends on a nuclear model as well as knowledge of form factors. In the past, CCQE data from the MiniBooNE experiment was analyzed assuming the Relativistic Fermi Gas (RFG) nuclear model, an axial dipole form factor in, and using the the z-expansion for the axial form factor in. We present the first analysis that combines a non-RFG nuclear model, in particular the Correlated Fermi Gas nuclear model (CFG) of, and the z expansion for the axial form factor. This will allow us to separate form factor and nuclear model effects in CCQE scattering. This project was supported through the Wayne State University REU program under NSF Grant PHY-1460853 and by the DOE Grant DE-SC0007983.

Predicting glass-forming compositions in the Al-La and Al-La-Ni systems

International Nuclear Information System (INIS)

Gargarella, P.; de Oliveira, M.F.; Kiminami, C.S.; Pauly, S.; Kuehn, U.; Bolfarini, C.; Botta, W.J.; Eckert, J.

2011-01-01

Research highlights: → The glass-forming ability of the Al-La and Al-La-Ni systems was studied using the λ* and the λ.Δe criteria. → Both criteria predicted with just 1% at. of error the best glass-former verified so far in the Al-La system. → Four new glass-former compositions could be predicted in the Al-La-Ni system using the λ.Δe criterion. → The best glass-former reported so far in the Al-La-Ni system was found. - Abstract: In this work, a criterion considering the topological instability (λ) and the differences in the electronegativity of the constituent elements (Δe) was applied to the Al-La and Al-Ni-La systems in order to predict the best glass-forming compositions. The results were compared with literature data and with our own experimental data for the Al-La-Ni system. The alloy described in the literature as the best glass former in the Al-La system is located near the point with local maximum for the λ.Δe criterion. A good agreement was found between the predictions of the λ.Δe criterion and literature data in the Al-La-Ni system, with the region of the best glass-forming ability (GFA) and largest supercooled liquid region (ΔT x ) coinciding with the best compositional region for amorphization indicated by the λ.Δe criterion. Four new glassy compositions were found in the Al-La-Ni system, with the best predicted composition presenting the best glass-forming ability observed so far for this system. Although the λ.Δe criterion needs further refinements for completely describe the glass-forming ability in the Al-La and Al-La-Ni systems, the results demonstrated that this criterion is a good tool to predict new glass-forming compositions.

17 CFR 270.30a-2 - Certification of Form N-CSR and Form N-Q.

Science.gov (United States)

2010-04-01

... 17 Commodity and Securities Exchanges 3 2010-04-01 2010-04-01 false Certification of Form N-CSR... Form N-CSR and Form N-Q. (a) Each report filed on Form N-CSR (§§ 249.331 and 274.128 of this chapter) or Form N-Q (§§ 249.332 and 274.130 of this chapter) by a registered management investment company...

Soil Forming Factors

Science.gov (United States)

It! What is Soil? Chip Off the Old Block Soil Forming Factors Matters of Life and Death Underneath It All Wise Choices A World of Soils Soil Forming Factors 2 A Top to Bottom Guide 3 Making a Soil Monolith 4 Soil Orders 5 State Soil Monoliths 6 Where in the Soil World Are You? >> A Top to

CTEPP NC DATA COLLECTED ON FORM 05: CHILD DAY CARE CENTER PRE-MONITORING QUESTIONNAIRE

Science.gov (United States)

This data set contains data concerning the potential sources of pollutants at the day care center including the chemicals that have been applied in the past at the day care center by staff members or by commercial contractors. The day care teacher was asked questions related to t...

CTEPP-OH DATA COLLECTED ON FORM 05: CHILD DAY CARE CENTER PRE-MONITORING QUESTIONNAIRE

Science.gov (United States)

This data set contains data for CTEPP-OH concerning the potential sources of pollutants at the day care center including the chemicals that have been applied in the past at the day care center by staff members or by commercial contractors. The day care teacher was asked questions...

18 CFR 357.3 - FERC Form No. 73, Oil Pipeline Data for Depreciation Analysis.

Science.gov (United States)

2010-04-01

... Pipeline Data for Depreciation Analysis. 357.3 Section 357.3 Conservation of Power and Water Resources... No. 73, Oil Pipeline Data for Depreciation Analysis. (a) Who must file. Any oil pipeline company requesting new or changed depreciation rates pursuant to part 347 of this title if the proposed depreciation...

Biowaiver monographs for immediate release solid oral dosage forms: cimetidine.

NARCIS (Netherlands)

Jantratid, E; Prakongpan, S; Dressman, J B; Amidon, G L; Junginger, H E; Midha, K K; Barends, D M

2006-01-01

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing cimetidine are reviewed. According to the current Biopharmaceutics Classification System (BCS), cimetidine would be assigned

The characterization and testing of candidate immobilization forms for the disposal of plutonium

International Nuclear Information System (INIS)

Bakel, A. J.; Buck, E. C.; Chamberlain, D. B.; Ebbinghaus, B. B.; Fortner, J. A.; Marra, J. C.; Mcgrail, B. P.; Mertz, C. J.; Peeler, D. K.; Shaw, H. F.; Strachan, D. M.; Van Konynenburg, R. A.; Vienna, J. D.; Wolf, S. F.

1997-01-01

Candidate immobilization forms for the disposal of surplus weapons-useable are being tested and characterized. The goal of the testing program was to provide sufficient data that, by August 1997, an informed selection of a single immobilization form could be made so that the form development and production R and D could be more narrowly focused. Two forms have been under consideration for the past two years: glass and ceramic. In August, 1997, the Department of Energy (DOE) selected ceramic for plutonium disposition, halting further work on the glass material. In this paper, we will briefly describe these two waste forms, then describe our characterization techniques and testing methods. The analytical methods used to characterize altered and unaltered samples are the same. A full suite of microscopic techniques is used. Techniques used include optical, scanning electron, and transmission electron microscopies. For both candidate immobilization forms, the analyses are used to characterize the material for the presence of crystalline phases and amorphous material. Crystalline materials, either in the untested immobilization form or in the alteration products from testing, are characterized with respect to morphology, crystal structure, and composition. The goal of these analyses is to provide data on critical issues such as Pu and neutron absorber volubility in the immobilization form, thermal stability, potential separation of absorber and Pu, and the long-term behavior of the materials. Results from these analyses will be discussed in the presentation. Testing methods include MCC-1 tests, product consistency tests (methods A and B), unsaturated ''drip'' tests, vapor hydration tests, single-pass flow-through tests, and pressurized unsaturated flow tests. Both candidate immobilization forms have very low dissolution rates; examples of typical test results will be reported

A Survey on Accessing Data over Cloud Environment using Data mining Algorithms

OpenAIRE

B.Prasanalakshmi; A.Selvaraj

2015-01-01

In today's world to access the large set of data is more complex, because the data may be structured and unstructured like in the form of text, images, videos, etc., it cannot be controlled from the internet users this is known as Big data. Useful data can be accessed through extracting from big data with the help of data mining algorithms. Data mining is a technique for determine the patterns; classify the data, clustering from the large set of data. In this paper we will discuss how large s...

A test of the Veneziano - like πNN form factor

International Nuclear Information System (INIS)

Cass, A.; Mckellar, H.J.

1978-01-01

Dominguez' Veneziano-like πNN form factor has been investigated by attempting to use it to fit dsigma/dt data for np → pn and (antiproton)p → (antineutron)n at 8 GeV/c and 23.5 GeV/c in the interval 0 2 . With n=5/2 as proposed by Dominguez it is not possible to fit the data. A fit can be obtaine for other values of n

Cosmic Star–Forming Gas as seen from the Milky Way

Science.gov (United States)

Kauffmann, Jens

2018-01-01

We still struggle to understand the star formation properties of galaxies throughout the cosmos. Is star formation driven by the structure of galaxies? Or is it plainly controlled by the mass of dense gas that can be found in a galaxy?This poster presents results from several recent projects that deliver important insights on the global star formation activity of galaxies, based on detailed studies of star-forming regions in the Milky Way. First, the proberties of dense clouds in the Galactic Center are discussed, using data from interferometers likw ALMA. Second, the kinematics of Milky Way molecular clouds are discussed based on a variety of data sets. Third, the LEGO survey (Line Emission in Galaxy Observations) is discussed. This latter study challenges concepts of how dense gas in galaxies can be traced. In combination these studies deliver a fresh look at the various factors controlling how galaxies form stars.

Sheet-bulk metal forming – forming of functional components from sheet metals

Directory of Open Access Journals (Sweden)

Merklein Marion

2015-01-01

Full Text Available The paper gives an overview on the application of sheet-bulk metal forming operations in both scientific and industrial environment. Beginning with the need for an innovative forming technology, the definition of this new process class is introduced. The rising challenges of the application of bulk metal forming operations on sheet metals are presented and the demand on a holistic investigation of this topic is motivated. With the help of examples from established production processes, the latest state of technology and the lack on fundamental knowledge is shown. Furthermore, perspectives regarding new research topics within sheet-bulk metal forming are presented. These focus on processing strategies to improve the quality of functional components by the application of process-adapted semi-finished products as well as the local adaption of the tribological system.

Biowaiver monograph for immediate-release solid oral dosage forms: bisoprolol fumarate.

Science.gov (United States)

Charoo, Naseem A; Shamsher, Areeg A A; Lian, Lai Y; Abrahamsson, Bertil; Cristofoletti, Rodrigo; Groot, D W; Kopp, Sabine; Langguth, Peter; Polli, James; Shah, Vinod P; Dressman, Jennifer

2014-02-01

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate-release (IR) solid oral dosage forms containing bisoprolol as the sole active pharmaceutical ingredient (API) are reviewed. Bisoprolol is classified as a Class I API according to the current Biopharmaceutics Classification System (BCS). In addition to the BCS class, its therapeutic index, pharmacokinetic properties, data related to the possibility of excipient interactions, and reported BE/bioavailability problems are taken into consideration. Qualitative compositions of IR tablet dosage forms of bisoprolol with a marketing authorization (MA) in ICH (International Conference on Harmonisation) countries are tabulated. It was inferred that these tablets had been demonstrated to be bioequivalent to the innovator product. No reports of failure to meet BE standards have been made in the open literature. On the basis of all these pieces of evidence, a biowaiver can currently be recommended for bisoprolol fumarate IR dosage forms if (1) the test product contains only excipients that are well known, and used in normal amounts, for example, those tabulated for products with MA in ICH countries and (2) both the test and comparator dosage form are very rapidly dissolving, or, rapidly dissolving with similarity of the dissolution profiles demonstrated at pH 1.2, 4.5, and 6.8. © 2013 Wiley Periodicals, Inc. and the American Pharmacists Association.

Confectionery-based dose forms.

Science.gov (United States)

Tangso, Kristian J; Ho, Quy Phuong; Boyd, Ben J

2015-01-01

Conventional dosage forms such as tablets, capsules and syrups are prescribed in the normal course of practice. However, concerns about patient preferences and market demands have given rise to the exploration of novel unconventional dosage forms. Among these, confectionery-based dose forms have strong potential to overcome compliance problems. This report will review the availability of these unconventional dose forms used in treating the oral cavity and for systemic drug delivery, with a focus on medicated chewing gums, medicated lollipops, and oral bioadhesive devices. The aim is to stimulate increased interest in the opportunities for innovative new products that are available to formulators in this field, particularly for atypical patient populations.

Data Assimilation - Advances and Applications

Energy Technology Data Exchange (ETDEWEB)

Williams, Brian J. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2014-07-30

This presentation provides an overview of data assimilation (model calibration) for complex computer experiments. Calibration refers to the process of probabilistically constraining uncertain physics/engineering model inputs to be consistent with observed experimental data. An initial probability distribution for these parameters is updated using the experimental information. Utilization of surrogate models and empirical adjustment for model form error in code calibration form the basis for the statistical methodology considered. The role of probabilistic code calibration in supporting code validation is discussed. Incorporation of model form uncertainty in rigorous uncertainty quantification (UQ) analyses is also addressed. Design criteria used within a batch sequential design algorithm are introduced for efficiently achieving predictive maturity and improved code calibration. Predictive maturity refers to obtaining stable predictive inference with calibrated computer codes. These approaches allow for augmentation of initial experiment designs for collecting new physical data. A standard framework for data assimilation is presented and techniques for updating the posterior distribution of the state variables based on particle filtering and the ensemble Kalman filter are introduced.

A Framework for Identifying and Analyzing Major Issues in Implementing Big Data and Data Analytics in E-Learning: Introduction to Special Issue on Big Data and Data Analytics

Science.gov (United States)

Corbeil, Maria Elena; Corbeil, Joseph Rene; Khan, Badrul H.

2017-01-01

Due to rapid advancements in our ability to collect, process, and analyze massive amounts of data, it is now possible for educational institutions to gain new insights into how people learn (Kumar, 2013). E-learning has become an important part of education, and this form of learning is especially suited to the use of big data and data analysis,…

Comparison of arch forms between Turkish and North American

Directory of Open Access Journals (Sweden)

Ahmet A. Celebi

2016-04-01

Full Text Available ABSTRACT Objective: The aim of this study was to clarify the morphological differences in the mandibular arches of Turkish and North American white subjects. Methods: The sample included 132 Turkish (34 Class I, 58 Class II, and 40 Class III and 160 North American (60 Class I, 50 Class II, and 50 Class III subjects. The most facial portion of 13 proximal contact areas was digitized from photocopied images of patients' mandibular dental arches. Clinical bracket points were calculated for each tooth based on mandibular tooth thickness data. Four linear and two proportional measurements were taken. The subjects were grouped according to arch form types (tapered, ovoid and square in order to have frequency distribution compared between ethnic groups in each Angle classification. Results: The Turkish group showed significantly lower molar depth and more significant molar width-depth (W/D ratio in all three Angle classifications. On the other hand, the Turkish group also showed a significantly larger intercanine width in Class III malocclusion and intermolar width in Class II malocclusion. The most frequent arch forms seen were the ovoid arch form in the Turkish group and the tapered form in the white group. Conclusions: Our results demonstrate that when treating Turkish patients, one should expect to use preformed ovoid arch form orthodontic wires in a significant percentage of patients.

Innovative Technological Approach to Ebola Virus Disease Outbreak Response in Nigeria Using the Open Data Kit and Form Hub Technology.

Directory of Open Access Journals (Sweden)

Daniel Tom-Aba

Full Text Available The recent outbreak of Ebola Virus Disease (EVD in West Africa has ravaged many lives. Effective containment of this outbreak relies on prompt and effective coordination and communication across various interventions; early detection and response being critical to successful control. The use of information and communications technology (ICT in active surveillance has proved to be effective but its use in Ebola outbreak response has been limited. Due to the need for timeliness in reporting and communication for early discovery of new EVD cases and promptness in response; it became imperative to empower the response team members with technologies and solutions which would enable smooth and rapid data flow. The Open Data Kit and Form Hub technology were used in combination with the Dashboard technology and ArcGIS mapping for follow up of contacts, identification of cases, case investigation and management and also for strategic planning during the response. A remarkable improvement was recorded in the reporting of daily follow-up of contacts after the deployment of the integrated real time technology. The turnaround time between identification of symptomatic contacts and evacuation to the isolation facility and also for receipt of laboratory results was reduced and informed decisions could be taken by all concerned. Accountability in contact tracing was ensured by the use of a GPS enabled device. The use of innovative technologies in the response of the EVD outbreak in Nigeria contributed significantly to the prompt control of the outbreak and containment of the disease by providing a valuable platform for early warning and guiding early actions.

INFORMATIONAL EFFECT OF A FORM

Directory of Open Access Journals (Sweden)

Kovalenko V.F.

2016-02-01

Full Text Available The study was conducted by method of light scattering of laser emission. The influence of the form field, mutual influence of mental informational and form torsional fields as well as the following exposure of water samples in the form field after the cease of informational influence on water structure were examined. Paper forms of a pyramid, a cylinder, and a prism were used. The experimental findings show that mechanism of mutual influence on water structure of the form and informational torsional fields depended on the initial conditions of spin restructuring process – the configuration of a form, the type of the form field (internal and external ones, and the initial water structure. The influence of the form field on informational aftereffect was determined, the character of which was defined by ratio of intensities of torsional form field and an informational soliton. The phenomenon of the abnormally large amplification of the informational aftereffect in the internal field of a pyramid demonstrating the attributes of positive reverse connection between the informational soliton and torsional field of water structure and selection of generated cluster sizes were discovered.

Survey of concrete waste forms

International Nuclear Information System (INIS)

Moore, J.G.

1981-01-01

The incorporation of radioactive waste in cement has been widely studied for many years. It has been routinely used at nuclear research and production sites for some types of nuclear waste for almost three decades and at power reactor plants for nearly two decades. Cement has many favorable characteristics that have contributed to its popularity. It is a readily available material and has not required complex and/or expensive equipment to solidify radioactive waste. The resulting solid products are noncombustible, strong, radiation resistant, and have reasonable chemical and thermal stability. As knowledge increased on the possible dangers from radioactive waste, requirements for waste fixation became more stringent. A brief survey of some of the research efforts used to extend and improve cementitious waste hosts to meet these requirements is given in this paper. Selected data are presented from the rather extensive study of the applicability of concrete as a waste form for Savannah River defense waste and the use of polymer impregnation to reduce the leachability and improve the durability of such waste forms. Hot-pressed concretes that were developed as prospective host solids for high-level wastes are described. Highlights are given from two decades of research on cementitious waste forms at Oak Ridge National Laboratory. The development of the hydrofracture process for the disposal of all locally generated radioactive waste led to a process for the disposal of I-129 and to the current research on the German in-situ solidification process for medium-level waste and the Oak Ridge FUETAP process for all classes of waste including commercial and defense high-level wastes. Finally, some of the more recent ORNL concepts are presented for the use of cement in the disposal of inorganic and biological sludges, waste inorganic salts, trash, and krypton

Data-driven process monitoring and diagnosis with support vector data description

OpenAIRE

Tafazzoli Moghaddam, Esmaeil

2011-01-01

This thesis targets the problem of fault diagnosis of industrial processes with data-drivenapproaches. In this context, a class of problems are considered in which the only informationabout the process is in the form of data and no model is available due to complexity of theprocess. Support vector data description is a kernel based method recently proposed in the fieldof pattern recognition and it is known for its powerful capabilities in nonlinear data classificationwhich can be exploited in...

Testing the Teacher's Report Form Syndromes in 20 Societies

Science.gov (United States)

Ivanova, Masha Y.; Achenbach, Thomas M.; Rescorla, Leslie A.; Dumenci, Levent; Almqvist, Fredrik; Bathiche, Marie; Bilenberg, Niels; Bird, Hector; Domuta, Anca; Erol, Nese; Fombonne, Eric; Fonseca, Antonio; Frigerio, Alessandra; Kanbayashi, Yasuko; Lambert, Michael C.; Leung, Patrick; Liu, Xianchen; Minaei, Asghar; Roussos, Alexandra; Simsek, Zeynep; Weintraub, Sheila; Wolanczyk, Tomasz; Zubrick, Stephen; Zukauskiene, Rita; Verhulst, Frank C.

2007-01-01

Standardized assessment instruments developed in one society are often used in other societies. However, it is important to determine empirically how assessment instruments developed in one society function in others. The present study tested the fit of the Teacher's Report Form syndrome structures in 20 diverse societies using data for 30,030 6-…

Survey of Media Forms and Information Flow Models in Microsystems Companies

Science.gov (United States)

Durugbo, Christopher; Tiwari, Ashutosh; Alcock, Jeffery R.

The paper presents the findings of a survey of 40 microsystems companies that was carried out to determine the use and the purpose of use of media forms and information flow models within these companies. These companies as 'product-service systems' delivered integrated products and services to realise customer solutions. Data collection was carried out by means of an online survey over 3 months. The survey revealed that 42.5% of respondents made use of data flow diagrams and 10% made use of design structure matrices. The survey also suggests that a majority of companies (75%) made use of textual and diagrammatic media forms for communication, analysis, documentation and representation during design and development processes. The paper also discusses the implications of the survey findings to product-service systems.

Form factors of {eta}{sub c} in light-front quark model

Energy Technology Data Exchange (ETDEWEB)

Geng, Chao-Qiang [Chongqing University of Posts and Telecommunications, College of Mathematics and Physics, Chongqing (China); National Center for Theoretical Sciences, Physics Division, Hsinchu (China); National Tsing Hua University, Department of Physics, Hsinchu (China); Lih, Chong-Chung [Shu-Zen College of Medicine and Management, Department of Optometry, Kaohsiung Hsien (China); National Center for Theoretical Sciences, Physics Division, Hsinchu (China); National Tsing Hua University, Department of Physics, Hsinchu (China)

2013-08-15

We study the form factors of the {eta}{sub c} meson in the light-front quark model. We explicitly show that the transition form factor of {eta}{sub c} {yields} {gamma}{sup *}{gamma} as a function of the momentum transfer is consistent with the experimental data by the BaBar collaboration, while the decay constant of {eta}{sub c} is found to be f{sub {eta}{sub c}} = 230.5{sup +52.2}{sub -61.0} and 303.6{sup +115.2}{sub -116.4} MeV for {eta}{sub c} {proportional_to} c anti c by using two {eta}{sub c} {yields} {gamma}{gamma} decay widths of 5.3 {+-} 0.5 and 7.2 {+-} 2.1 keV, given by Particle Data Group and Lattice QCD calculation, respectively. (orig.)

Characteristics Data Base: Programmer's guide to the LWR Quantities Data Base

International Nuclear Information System (INIS)

Jones, K.E.; Moore, R.S.

1990-08-01

The LWR Quantities Data Base is a menu-driven PC data base developed as part of OCRWM's waste, technical data base on the characteristics of potential repository wastes, which also includes non-LWR spent fuel, high-level and other materials. This programmer's guide completes the documentation for the LWR Quantities Data Base, the user's guide having been published previously. The PC data base itself may be requested from the Oak Ridge National Laboratory, using the order form provided in Volume 1 of publication DOE/RW-0184

Pion transition form factor in k{sub T} factorization

Energy Technology Data Exchange (ETDEWEB)

Li, Hsiang-nan [Academica Sinica, Taipei, Taiwan (China). Inst. of Physics; Tsing-Hua Univ., Hsinchu, Taiwan (China). Dept. of Phyiscs; National Cheng-Kung Univ., Tainan, Taiwan (China). Dept. of Physics; National Cheng-Chi Univ, Taipei, Taiwan (China). Inst. of Applied Physics; Mishima, Satoshi [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany)

2009-07-15

It has been pointed out that the recent BaBar data on the {pi}{gamma}{sup *} {yields} {gamma} transition form factor F{sub {pi}}{sub {gamma}}(Q{sup 2}) at low (high) momentum transfer squared Q{sup 2} indicate an asymptotic (flat) pion distribution amplitude. These seemingly contradictory observations can be reconciled in the k{sub T} factorization theorem: the increase of the measured Q{sup 2}FF{sub {pi}}{sub {gamma}}(Q{sup 2}) for Q{sup 2} > 10 GeV{sup 2} is explained by convoluting a k{sub T} dependent hard kernel with a flat pion distribution amplitude, k{sub T} being a parton transverse momentum. The low Q{sup 2} data are accommodated by including the resummation of {alpha}{sub s} ln{sup 2}x, x being a parton momentum fraction, which provides a stronger suppression at the endpoints of x. The next-to-leading-order correction to the pion transition form factor is found to be less than 20% in the considered range of Q{sup 2}. (orig.)

Electromagnetic and axial-vector form factors of the quarks and nucleon

Science.gov (United States)

Dahiya, Harleen; Randhawa, Monika

2017-11-01

In light of the improved precision of the experimental measurements and enormous theoretical progress, the nucleon form factors have been evaluated with an aim to understand how the static properties and dynamical behavior of nucleons emerge from the theory of strong interactions between quarks. We have analyzed the vector and axial-vector nucleon form factors (GE,Mp,n(Q2) and GAp,n(Q2)) using the spin observables in the chiral constituent quark model (χCQM) which has made a significant contribution to the unraveling of the internal structure of the nucleon in the nonperturbative regime. We have also presented a comprehensive analysis of the flavor decomposition of the form factors (GEq(Q2), GMq(Q2) and GAq(Q2) for q = u,d,s) within the framework of χCQM with emphasis on the extraction of the strangeness form factors which are fundamental to determine the spin structure and test the chiral symmetry breaking effects in the nucleon. The Q2 dependence of the vector and axial-vector form factors of the nucleon has been studied using the conventional dipole form of parametrization. The results are in agreement with the available experimental data.

77 FR 70745 - Proposed Change to Data Protection

Science.gov (United States)