Prevalência de parasitoses intestinais entre crianças de 4-12 anos no Crato, Estado do Ceará: um problema recorrente de saúde pública = Prevalence of intestinal parasite infections among 4- to 12-year-old children in Crato, Ceará State

Directory of Open Access Journals (Sweden)

Izabel Alencar Barros Vasconcelos

2011-01-01

Full Text Available Nesse estudo, foi estimada a frequência de parasitoses intestinais em 383 crianças do bairro Pinto Madeira em Crato, Estado do Ceará. Os dados foram obtidos por meio de inquérito domiciliar e de exame coproparasitológico abrangendo residências com crianças de quatro a 12anos, foram utilizados os métodos de Kato-Katzo e Faust. Foi identificada uma associação de parasitoses intestinais com saneamento, disponibilidade e manuseio da água, com prevalência de Ascaris lumbricoides dentre os helmintos e Entamoeba sp. dentre os protozoários. Os dados obtidos demonstraram ainda a que prevalência de helmintos e protozoários foi significativamente maior para as crianças do sexo masculino de 4-5 anos e feminino de 6-7, filhos de mães com menor escolaridade, residentes nos domicílios com piores condições de abastecimento d’água e menor condições de higiene corporal e saneamento básico. Estes resultados sugerem que investimentos em infraestrutura básica e a adoção de políticas voltadas para melhorar a educação familiar poderiam contribuir significativamente na redução da prevalência das parasitoses intestinais em crianças.In this study, we estimated the frequency of intestinal parasites in 383 children in the Pinto Madeira neighborhood of Crato-Ceará State. A survey was conducted covering households with 4- to 12-year-old children, including interviews and coprological surveys using the Kato-Katz and Faust methods. An association was identified between intestinal parasitosis and sanitation, forms of use and availability of water. The prevalence of Ascaris lumbricoides and Entamoeba sp was demonstrated. The data also showed that the prevalence of helminths and protozoa was significantly higher for 4- to 5-year-old boys and6- to 7-year-old girls, children of mothers with less education, living in households with poor conditions of water supply, hygiene and sanitation. These results suggest that investments in sanitary

Nutrição mineral da fava d'anta Mineral nutrition of Dimorphandra mollis

Directory of Open Access Journals (Sweden)

Candido Alves da Costa

2007-03-01

Full Text Available Com o objetivo de caracterizar as limitações nutricionais na produção, no crescimento, nutrição e teores de flavonóides totais em fava-d'anta, um experimento foi conduzido em casa de vegetação com amostras de 0-20 cm de profundidade de um Latossolo Vermelho sob vegetação de cerrado. O delineamento experimental utilizado foi o inteiramente casualizado com 13 tratamentos e três repetições. Os tratamentos constaram da adubação com elemento faltante (omitindo-se a calagem e cada um dos nutrientes N, P, K, S, B, Cu, Fe e Zn. Verificou-se que a fava d'anta é tolerante à acidez do solo e sensível à deficiência de fósforo e potássio. O teor de flavonóides totais não variou entre os tratamentos.Aiming to characterize the nutritional limitations on growth, nutrition and total flavonoids concentration of the Dimorphandra mollis, an experiment was conducted in a greenhouse with 0-20 cm samples of an Oxisol under Cerrado vegetation. The experimental design was completely randomized with 13 treatments and three replications. The treatments consisted of fertilization with missing element technique (with omission of liming and each one of the macro and micronutrients N, P, K, S, B, Cu, Fe and Zn. Dimorphandra mollis plant is tolerant to acid soil and responsive to the omission of phosphorus and potassium. The total flavonoids concentration was not influenced by the treatments.

Insecticide resistance, associated mechanisms and fitness aspects in two Brazilian Stegomyia aegypti (= Aedes aegypti) populations.

Science.gov (United States)

Viana-Medeiros, P F; Bellinato, D F; Martins, A J; Valle, D

2017-12-01

In Brazil, insecticide resistance in Stegomyia aegypti (= Aedes aegypti) (Diptera: Culicidae) populations to pyrethroids and to the organophosphate (OP) temephos is disseminated. Currently, insect growth regulators (IGRs) and the OP malathion are employed against larvae and adults, respectively. Bioassays with mosquitoes from two northeast municipalities, Crato and Aracaju, revealed, in both populations, susceptibility to IGRs and malathion (RR 95  ≤ 2.0), confirming the effectiveness of these compounds. By contrast, temephos and deltamethrin (pyrethroid) resistance levels were high (RR 95  > 10), which is consistent with the use of intense chemical control. In Crato, RR 95 values were > 50 for both compounds. Knock-down-resistant (kdr) mutants in the voltage-gated sodium channel, the pyrethroid target site, were found in 43 and 32%, respectively, of Aracaju and Crato mosquitoes. Biochemical assays revealed higher metabolic resistance activity (esterases, mixed function oxidases and glutathione-S-transferases) at Aracaju. With respect to fitness aspects, mating effectiveness was equivalently impaired in both populations, but Aracaju mosquitoes showed more damaging effects in terms of longer larval development, decreased bloodmeal acceptance, reduced engorgement and lower numbers of eggs laid per female. Compared with mosquitoes in Crato, Aracaju mosquitoes exhibited lower OP and pyrethroid RR 95 , increased activity of detoxifying enzymes and greater effect on fitness. The potential relationship between insecticide resistance mechanisms and mosquito viability is discussed. © 2017 The Authors. Medical and Veterinary Entomology published by John Wiley & Sons Ltd on behalf of The Royal Entomological Society.

Germinação, vigor e sanidade de sementes de fava d'anta (Dimorphandra mollis Benth. obtidas de frutos coletados no solo e na planta Germination, vigor and sanity of "fava d'anta" (Dimorphandra mollis Benth. seeds obtained from fruits collected both in the soil and in the plant

Directory of Open Access Journals (Sweden)

A.V. Araujo

2009-01-01

Full Text Available O objetivo do trabalho foi avaliar a qualidade fisiológica e sanitária das sementes obtidas a partir de frutos maduros coletados no solo e nas plantas de fava d'anta, espécie medicinal nativa do Cerrado, ameaçada de extinção, cujos frutos são ricos em rutina. O delineamento experimental empregado foi o inteiramente casualizado, com 10 repetições. Cada repetição foi constituída de uma caixa gerbox contendo 15 sementes cada. A qualidade fisiológica foi determinada por meio de testes de germinação e vigor, avaliando-se a porcentagem de germinação, o índice de velocidade de germinação (IVG e a massa seca das raízes primárias. A qualidade sanitária foi determinada pela identificação dos microorganismos patogênicos associados às sementes, bem como pela porcentagem de ocorrência destes em cada parcela. Os fungos identificados nas sementes pertencem aos gêneros Fusarium, Alternaria, Aspergillus, Cladosporium, Colletrotrichum, Helminthosporium, Nigrospora, Penicillum, Phoma e Phomopsis. Sementes oriundas de frutos coletados no solo foram mais contaminadas por agentes patogênicos e apresentaram germinação (56,67%, vigor e sanidade inferiores às sementes obtidas de frutos coletados na planta.The aim of this work was to evaluate the physiological and sanitary quality of seeds obtained from mature fruits collected in the soil and in "fava d'anta" plants. Dimorphandra mollis constitutes an endangered medicinal species native to cerrado and presents fruits rich in rutin. The experimental design was completely randomized, with 10 replicates. Each replicate consisted of a gerbox containing 15 seeds each. Physiological quality was assessed through germination and vigor tests by evaluating germination percentage, germination velocity index (GVI, and primary root dry matter. Sanitary quality was evaluated by identifying pathogenic microorganisms associated with the seeds, as well as their occurrence percentage in each plot. The

Collective proposal of Contingency Plan as an alternative for management risks to socioenvironmental disasters within Network Management Risk of Córrego Dantas (REGER-CD), Nova Friburgo, State of Rio de Janeiro, Brazil

Science.gov (United States)

Freitas, Leonardo; Luiza Coelho Netto, Ana

2017-04-01

An extreme rainfall event took place in the Mountainous Region of the state of Rio de Janeiro in January 2011, causing a catastrophic landslide that resulted in more than 900 deaths and 350 people disappearances. Precipitation events associated with landslides are common in this region and climate change tends to increase the frequency of intense rains and, consequently, landslides. At the same time, the vulnerability of communities has increased as a result of disorderly urban growth. Despite that, before 2011 communities and public power were not prepared to disaster management..After the 2011 event, public authorities try to established policies to reduce these vulnerabilities. One of the communities where the government acted was Córrego Dantas. However, the actions in this place were carried out in a top-down model, without discussion with population. As a consequence, the performance of public power has amplified social vulnerabilities. Highlight for the truculent removal of residents; resettlement in geographically isolated housing complexes; and the establishment of urbanization policies that go against the interests of the residents. The construction of the Córrego d'Aantas Disaster Risk Management Network (REGER-CD), including residents of affected communities, researchers, NGO members and representatives of the public power, is one way to respond these questions. Within this network, the construction of a proposal for a collective contingency plan, articulated with the municipal contingency plan, is generating residents' empowerment, greater adaptation to risks and reducing the vulnerability of Disasters and mass movements

Radiation protection in medical diagnostic radiology in the city of Sobral, Brazil

International Nuclear Information System (INIS)

Menezes, F.L.; Paschoal, C.M.M.; Ferreira, F.C.L.; Alcantara, M.C.

2015-01-01

The objective of this study was to evaluate the suitability to radiation protection of four diagnostic radiology medical services in the city of Sobral-CE, Northeast of Brazil, and to analyze results of the literature for the cities of Rio Branco-AC, North of Brazil, and Rio de Janeiro-RJ, South-east of Brazil. In Sobral-CE, it was performed interviews and direct observations with reference to Brazilian law, the National Ordinance No.453/1998 of the Ministry of Health that regulates the operation of medical and odontological diagnostic radiology services. The results show the occurrence of many items in disagreement with the standard. The technical and operational infractions have basically due to unfamiliarity with the legislation, the lack of investment in training and/or professional development courses. (authors)

The complex systematics of zircons in migmatitic gneisses: An example from an Archean migmatite along the Patos Shear Zone, Borborema Province, NE Brazil

International Nuclear Information System (INIS)

Costa, A.C.D; Hackspacher, P.C; Dantas, E.L; Fetter, A.H.

2001-01-01

The Northem Tectonic Domain Borborema Province, in Northeast of Brazil records a complex history of tectonic activity ranging from 3.4 Ga to 0.6 Ga (Brito Neves, 1995 and Dantas, 1996). U-Pb systematics of zircons from a migmatitic gneiss just north of the Patos Shear Zone provide an excellent example of the difficulties encountered using conventional single-grain U/Pb zircon geochronology in polydeformed gneiss terranes. Our conventional single grain zircon analyses of a migmatite yielded Archean ages between ca. 3.3 at 2.8 a, as well as some highly discordant Paleoproterozoic ages. Subsequent cathodoluminescence images of these zircon grains showed complex internal structures that possibly record up to 4 separate stages of zircon growth. With such internal complexity, is impossible resolve primary crystallization ages as well as the ages of subsequent overgrowth events using conventional single grain analyses. Such resolution will require analyses of the individual grain domains using the SHRIMP method (au)

Mineralogy of bismutotanitalite from Northeastern. Brazil

International Nuclear Information System (INIS)

Adusumilli, M.S.

1979-01-01

Bismutotantalite samples were identified in the Carnauba dos Dantas pegmatites (State of Rio Grande do Norte). The study of the various species includes the optical characteristics and determination of X-ray fluorescence and diffraction whose results allowed to show the existence of ordered and disordered Bismutotantalites. The degree of ''order-disorder'' has been ascribed to the complex chemical composition and possible diadoch exchange between the Bi, - Fe, - Sn, - Mn and Ta ions under influence of the varying physical and chemical conditions during the development of the pegmatite. (author) [pt

Recovery Ce from Ce - TBP Used Oxalic Acid

International Nuclear Information System (INIS)

Purwani, MV; Subagiono, R.; Suyanti

2007-01-01

Recovery or stripping Ce from Ce - TBP product of monazite sand used oxalic acid. Ce - TBP as organic phase and oxalic acid as aqueous phase and as strong precipitant compound to precipitate metal element. The stripping product as Ce - oxalic precipitate. The influence parameter were percentage of oxalic acid, volume ratio of Ce-TBP with oxalic acid, time and rate of stripping. At stripping of 25 ml Ce - TBP used oxalic acid, the optimum condition were achieve at using 5% oxalic acid, volume ratio of Ce - TBP : 5% oxalic acid = 1 : 1, time of stripping 7.5 minute and rate of stripping 150 rpm. At the optimum condition was obtained the recovery efficiency was 100%. (author)

Prevalência de parasitoses intestinais entre crianças de 4-12 anos no Crato, Estado do Ceará: um problema recorrente de saúde pública - doi: 10.4025/actascihealthsci.v33i1.8539 Prevalence of intestinal parasite infections among 4- to 12-year-old children in Crato, Ceará State - doi: 10.4025/actascihealthsci.v33i1.8539

Directory of Open Access Journals (Sweden)

Henrique Douglas Melo Coutinho

2011-05-01

Full Text Available Nesse estudo, foi estimada a frequência de parasitoses intestinais em 383 crianças do bairro Pinto Madeira em Crato, Estado do Ceará. Os dados foram obtidos por meio de inquérito domiciliar e de exame coproparasitológico abrangendo residências com crianças de quatro a 12 anos, foram utilizados os métodos de Kato-Katzo e Faust. Foi identificada uma associação de parasitoses intestinais com saneamento, disponibilidade e manuseio da água, com prevalência de Ascaris lumbricoides dentre os helmintos e Entamoeba sp. dentre os protozoários. Os dados obtidos demonstraram ainda a que prevalência de helmintos e protozoários foi significativamente maior para as crianças do sexo masculino de 4-5 anos e feminino de 6-7, filhos de mães com menor escolaridade, residentes nos domicílios com piores condições de abastecimento d’água e menor condições de higiene corporal e saneamento básico. Estes resultados sugerem que investimentos em infraestrutura básica e a adoção de políticas voltadas para melhorar a educação familiar poderiam contribuir significativamente na redução da prevalência das parasitoses intestinais em crianças.In this study, we estimated the frequency of intestinal parasites in 383 children in the Pinto Madeira neighborhood of Crato-Ceará State. A survey was conducted covering households with 4- to 12-year-old children, including interviews and coprological surveys using the Kato-Katz and Faust methods. An association was identified between intestinal parasitosis and sanitation, forms of use and availability of water. The prevalence of Ascaris lumbricoides and Entamoeba sp was demonstrated. The data also showed that the prevalence of helminths and protozoa was significantly higher for 4- to 5-year-old boys and 6- to 7-year-old girls, children of mothers with less education, living in households with poor conditions of water supply, hygiene and sanitation. These results suggest that investments in sanitary

An overview of dental radiology in cities of Brazil

International Nuclear Information System (INIS)

Menezes, F.L.; Paschoal, C.M.M.; Ferreira, F.C.L.; Belinato, W.

2015-01-01

In Brazil, the National Ordinance No. 453/1998 of the Ministry of Health regulates the operation of medical and odontological diagnostic radiology services. However, the inspection of periapical dental X-ray equipment is not carried out by some Sanitary Surveillances. This study intended to determine the suitability to the ordinance of the dental offices of Sobral-CE, Northeast of Brazil, and to compare the results with literature data for other cities of Brazil, giving a view of dental radiology of this country. It was performed tests of radiation field and image quality, and it was applied questionnaires to the professionals of Sobral-CE. For the image quality test, it was used a dental phantom and the processing of the films was performed in the clinics and at the laboratory (standard). The questionnaire assessed physical parameters that interfere on the radiation protection and on the quality of images. The results show that the ordinance is not being properly followed and that it is necessary to inspect the periapical X-ray equipments. Moreover, in general, it is observed that dental professionals should have better training on ionizing radiation and on radiation protection. (authors)

Magnetic behaviour of cerium in Ce2 Sn5 and Ce3 Sn7, surstructures of Ce Sn3

International Nuclear Information System (INIS)

Stunault, A.

1988-07-01

The compound studied, Ce 2 Sn 5 and Ce 3 Sn 7 are both orthorhombic, surstructure of cubic Ce Sn 3 . Magnetic susceptibility measurements show in both compounds an antiferromagnetic order at low temperature and magnetization shows a high anisotropy. Magnetization densities are determined by polarized neutron diffraction. The cerium site which has two Ce atoms as nearest neighbourgs carries all the magnetism in both structures. For Ce 2 Sn 5 moments are directed as the high magnetization axis and structure is modulated. Ce 3 Sn 7 presents a simple antiferromagnetic order but moment are directed as low magnetization axis. Various transitions towards a ferromagnetic order are presented. Results are interpreted by measuring the difference between energy levels of crystalline field. A model of crystalline field and isotrope exchange agrees well with Ce 3 Sn 7 , but for Ce 2 Sn 7 it is necessary to reduce the magnetic moment which is typical of the Kondo effect [fr

CE and nanomaterials - Part II: Nanomaterials in CE.

Science.gov (United States)

Adam, Vojtech; Vaculovicova, Marketa

2017-10-01

The scope of this two-part review is to summarize publications dealing with CE and nanomaterials together. This topic can be viewed from two broad perspectives, and this article is trying to highlight these two approaches: (i) CE of nanomaterials, and (ii) nanomaterials in CE. The second part aims at summarization of publications dealing with application of nanomaterials for enhancement of CE performance either in terms of increasing the separation resolution or for improvement of the detection. To increase the resolution, nanomaterials are employed as either surface modification of the capillary wall forming open tubular column or as additives to the separation electrolyte resulting in a pseudostationary phase. Moreover, nanomaterials have proven to be very beneficial for increasing also the sensitivity of detection employed in CE or even they enable the detection (e.g., fluorescent tags of nonfluorescent molecules). © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

24 February 2012 - Portuguese Minister for Education and Science N. Crato visiting the LHC superconducting magnet test hall with technology Department Head F. Bordry and signing the guest book with CERN Director-General R. Heuer. The Minister is accompanied by Secretary of State for Science L. Parreira and LIP Director J.M. Gago. A. Henriques(ATLAS), C. Lourenço (CMS) and Adviser R. Voss accompany the delegation throughout.

CERN Multimedia

Maximilien Brice

2012-01-01

On 24 February Nuno Crato, the Portuguese minister for education and science, left, toured the LHC superconducting-magnet test hall accompanied by Frédérick Bordry, CERN’s technology department head. He also took the opportunity to visit the underground experimental areas of ATLAS and CMS, and heard about the LHC Computing Grid Project before meeting Portuguese scientists working at CERN.

Pyrazolates advance cerium chemistry: a CeIII/CeIV redox equilibrium with benzoquinone.

Science.gov (United States)

Werner, Daniel; Deacon, Glen B; Junk, Peter C; Anwander, Reiner

2017-05-16

Two stable cerium(iv) 3,5-dialkylpyrazolate complexes are presented, namely dimeric [Ce(Me 2 pz) 4 ] 2 (Me 2 pz = 3,5-dimethylpyrazolate) and monomeric Ce(tBu 2 pz) 4 (tBu 2 pz = 3,5-di-tert-butylpyrazolate) along with their trivalent counterparts [Ce(Me 2 pz) 3 ] and [Ce(tBu 2 pz) 3 ] 2 . All complexes were obtained from protonolysis reactions employing the silylamide precursors Ce[N(SiHMe 2 ) 2 ] 4 and Ce[N(SiMe 3 ) 2 ] 3 . Treatment of homoleptic Ce IV and Ce III Me 2 pz complexes with 1,4-hydroquinone (H 2 hq) or 1,4-benzoquinone (bq), respectively, ultimately gave the same trimetallic Ce III species via a cerium redox equilibrium. The Ce III complex Ce 3 (Me 2 pz) 5 (pchd) 2 (L) (pchd = 1,4-bis(3,5-dimethylpyrazol-1-yl)cyclohex-2,5-diene-1,4-diolato; L = Me 2 pzH or (thf) 2 ) results from a di-1,4-pyrazolyl attack on pre-coordinated bq. The reduction of bq by [Ce(Me 2 pz) 3 (thf)] 2 , and re-oxidation by the resulting Ce IV species was supported by UV-vis spectroscopic investigations. Comparisons with the redox-innocent complexes [Ln(Me 2 pz) 3 (thf)] 2 (Ln = La and Pr) revealed far less selective reactions with bq, giving hexametallic and octametallic rare-earth metal side products containing 2-Me 2 pz substituted hq ligands.

EPR study of concentration dependence in Ce, Ce : La and Ce:Y doped SrF2

NARCIS (Netherlands)

Dankert, O.; Vainchtein, David; Datema, H.C.; den Hartog, Hendrik

1995-01-01

Experimental results of an EPR-study of the concentration dependence of the doubly integrated intensity and linewidth of the signals associated with tetragonal Ce3+-F--dipoles in Sr1-xCexF2+x, Sr-1-0.005-x Ce0.005LaxF2+0.005+x and Sr-1-0.005-x Ce0.005YxF2+0.005+x are presented. Both show a nonlinear

Coherence Kondo gap in CeNiSn and CeRhSb

International Nuclear Information System (INIS)

Takabatake, T.; Nakamoto, G.; Tanaka, H.; Bando, Y.; Fujii, H.; Nishigori, S.; Goshima, H.; Suzuki, T.; Fujita, T.; Oguro, I.; Hiraoka, T.; Malik, S.K.

1994-01-01

CeNiSn and CeRhSb are Kondo-lattice compounds showing the behavior of a small-gap semiconductor at temperatures below 7 K. We review and discuss the magnetic, transport and specific-heat measurements performed on single crystals of CeNiSn and polycrystals of CeRhSb. Prerequisites for gap formation are deduced from the effects of substitution and application of a magnetic field and pressure on the gapped state. ((orig.))

Special educaction and rewiews in the municipality of large scale Sobral (CE

Directory of Open Access Journals (Sweden)

Ana Paula Lima Barbosa Cardoso

2012-11-01

Full Text Available This article aims to discuss and analyze the participation of students with disabilities in public schools of the city of Sobral-CE in the assessment scale developed in that context. It follows a case study, a qualitative approach, conducted within the Department of Education and two municipal schools; the highest and lowest IDEB results (2009. The data collection instruments: analysis of documents, interviews and observation, and content analysis. The theoretical framework discusses the large-scale evaluation in the brazilian context in conjunction with the literature on the evaluation of teaching for students with disabilities. We describe the landscape of education in general sobralense and also data on special education. The research results discussed two cases of large-scale evaluation that occurred in that municipality: municipal evaluation and Proof Brazil. Regarding the first, the subjects affirms the participation of students with disabilities through a mechanism that prevents these results affect other students, are called "children of the shore." In Proof Brazil, the subjects again reported the participation of these students in national testing. It's criticizing the appropriateness of that instrument to assess this particular student body, suggesting the need of developping more "relevant" ones. Finally, it appears that the large-scale evaluation calls into question the process of schooling experienced by pupils with disabilities in Sobral-CE, showing the challenges and difficulties of the actions of school inclusion proposals in that context.

Influence of Ce-H bonding on the physical properties of the hydrides CeCoSiH1.0 and CeCoGeH1.0

International Nuclear Information System (INIS)

Chevalier, B; Matar, S F; Menetrier, M; Marcos, J Sanchez; Fernandez, J Rodriguez

2006-01-01

The hydrides CeCoSiH 1.0 and CeCoGeH 1.0 which crystallize like the parent antiferromagnetic compounds CeCoSi and CeCoGe in the tetragonal CeFeSi-type structure, have been investigated by specific heat and thermoelectric power measurements and 1 H nuclear magnetic resonance (NMR). CeCoSiH 1.0 is an intermediate valence compound whereas CeCoGeH 1.0 can be considered as a nearly trivalent cerium compound. This behaviour is corroborated by the occurrence of a slight broadening of the 1 H NMR signal in the sequence CeCoSiH 1.0 → CeCoGeH 1.0 . The band structure calculations performed on these hydrides reveal the existence of strong bonding Ce-H interaction, found to be larger in CeCoSiH 1.0 than in CeCoGeH 1.0

Rare-earth elements in uranium deposits in the municipality of Pedra, Pernambuco, Brazil

International Nuclear Information System (INIS)

Kennedy Francys Rodrigues Damascena; Romilton dos Santos Amaral; Jose Araujo dos Santos Junior; Alberto Antonio da Silva; Romulo Simoes Cezar Menezes

2015-01-01

In the present study, soil and rock samples were collected from uranium deposits in the city of Pedra, Pernambuco, Brazil. These samples were analyzed using neutron activation analysis to identify the occurrence of rare-earth elements (REE). The most abundant elements found were Ce, Nd and La, with concentrations 12 times higher than the average in the earth's crust and 4.6 times higher than values reported in worldwide studies, including Brazil. Nonetheless, further studies to examine the economic feasibility of mining REEs from this site are necessary. (author)

A comparative neutron activation analysis study of common generic manipulated and reference medicines commercialized in Brazil

International Nuclear Information System (INIS)

Leal, A.S.; Menezes, M.A.B.C.; Rodrigues, R.R.; Andonie, O.; Vermaercke, P.; Sneyers, L.

2008-01-01

In this work, a comparative study of neutron activation analysis (NAA) was performed by the nuclear institutes: CDTN/CNEN-Brazil, CCHEN-Chile and the SCK.CEN-Belgium aiming to investigate some generic, manipulated and reference medicines largely commercialized in Brazil. Some impurities such as: As, Ba, Br, Ce, Co, Cr, Eu, Fe, Hf, Sb, Sc, Sm, Ti and Zn were found, and the heterogeneity of the samples pointed out the lack of an efficient public system of quality control

Comment on “Synthesis of ceria (CeO_2 and CeO_2_−_x) nanoparticles via decarbonation and Ce(III) oxidation of synthetic bastnaesite (CeCO_3F)” by Montes-Hernandez et al

International Nuclear Information System (INIS)

Gysi, Alexander P.; Williams-Jones, Anthony E.

2016-01-01

Montes-Hernandez et al. [5] recently reported results of a study of the decarbonation of fine-grained synthetic bastnäsite-(Ce) precipitates involving the oxidation of Ce(III) to Ce(IV) and the formation of ceria (CeO_2 and CeO_2_-_x with oxygen vacancies) nano-particles. The purpose of their study was to show that oxidation of Ce(III) to Ce(IV) occurs spontaneously during heating of bastnäsite-(Ce) in air, a vacuum, N_2 or Ar gas. However, their interpretation of the formation of CeO_2 is not supported by the findings of Gysi and Williams-Jones [3], who showed that natural bastnäsite-(Ce) decomposes to form rare earth element (REE) oxyfluorides (REEOF). The latter was documented using differential scanning calorimetric (DSC) and thermogravimetric (TGA) experiments under a deoxygenated N_2 atmosphere. In their experiments, Gysi and Williams-Jones [3] found no evidence for the oxidation of Ce(III) to Ce(IV). This raises the question of whether the experiments of Montes-Hernandez et al. [5] in a N_2 atmosphere (and by extension in an Ar atmosphere) were compromised because of contamination by O_2 and that, as a result, they reached the erroneous conclusion that Ce(III) oxidizes spontaneously to Ce(IV) during heating of bastnäsite-(Ce) under these conditions. In order to explain the disagreement between their findings and those of Gysi and Williams-Jones [3], Montes-Hernandez et al. [5], proposed that the X-ray diffraction data of the former study were incorrectly interpreted. Here, we provide further evidence that the natural bastnäsite-(Ce) employed in the study by Gysi and Williams-Jones [3] decomposed to form REE oxyfluorides (i.e., CeOF, LaOF, PrOF and NdOF) and not CeO_2, and supply explanations for why Montes-Hernandez et al. [5] erroneously concluded that CeO_2 is produced during decomposition of this mineral under N_2 and Ar atmospheres. In so doing, we hope to provide new insights into the decomposition of bastnäsite-(Ce) that will help guide future

Lattice dynamics of γ--Ce

International Nuclear Information System (INIS)

Gould, T.A.

1978-08-01

The phonon and magnetic measurements described in the thesis produced the following significant results concerning the lattice dynamical and magnetic properties of γ-Ce. The phonon spectrum is relatively soft, which is consistent with results obtained for CeSn 3 . The L [110] and T [111] branches of the dispersion curve are anomalous. The C 11 and C 44 elastic constants are quite close in value. No discrete magnetic excitations were observed. The magnetic scattering is qualitatively similar to the results from Ce 0 . 74 Th 0 . 26 , however, GAMMA/sub Ce/ less than GAMMA/sub Ce-Th/. The various lattice dynamical and magnetic similarities among γ-Ce, CeSn 3 , and Ce 0 . 74 Th 0 . 26 are mixed valence compounds. Therefore, a complete theoretical description of the observed properties of Ce and its compounds may provide a basis for understanding a whole class of mixed valence materials

Dopant concentration dependence of radiation-induced positive hysteresis of Ce:GSO and Ce:GSOZ

International Nuclear Information System (INIS)

Yanagida, Takayuki; Fujimoto, Yutaka; Watanabe, Kenichi

2014-01-01

Positive hysteresis and radiation tolerance to high-dose radiation exposure were investigated for Ce 0.5, 1, and 1.5%-doped Gd 2 SiO 5 (GSO) and for Zr co-doped GSO with the same Ce concentrations (GSOZ). When they were irradiated by 200–800 Gy 60 Co in 200 Gy steps, all Ce-doped GSO samples exhibited light yield enhancement (positive hysteresis). On the other hand, the light yield of GSOZ decreased greatly. Ce 0.5%-doped GSO showed the highest positive hysteresis, with ∼20% light yield enhancement. When the Ce concentration was increased, the positive hysteresis became weaker. - Highlights: • Positive hysteresis Ce 0.5, 1, and 1.5% doped GSO and GSOZ are studied. • Ce 0.5, 1, and 1.5% doped GSO show the positive hysteresis by 2–8 M rad 60 Co irradiation. • Ce 0.5, 1, and 1.5% doped GSOZ do not show the positive hysteresis. • By Zn co-doping, radiation tolerance of GSO becomes weaker. • By dense Ce doping, radiation tolerance of GSO and GSOZ are improved

Tuning Ce distribution for high performanced Nd-Ce-Fe-B sintered magnets

Energy Technology Data Exchange (ETDEWEB)

Fan, Xiaodong [School of Materials Science and Engineering, Xi’an University of Technology, Xi’an 710048 (China); Key Laboratory of Magnetic Materials and Devices, Ningbo Institute of Material Technology and Engineering, Chinese Academy of Science, Ningbo 315201 (China); Guo, Shuai; Chen, Kan; Chen, Renjie; Lee, Don [Key Laboratory of Magnetic Materials and Devices, Ningbo Institute of Material Technology and Engineering, Chinese Academy of Science, Ningbo 315201 (China); You, Caiyin, E-mail: caiyinyou@xaut.edu.cn [School of Materials Science and Engineering, Xi’an University of Technology, Xi’an 710048 (China); Yan, Aru, E-mail: aruyan@nimte.ac.cn [Key Laboratory of Magnetic Materials and Devices, Ningbo Institute of Material Technology and Engineering, Chinese Academy of Science, Ningbo 315201 (China)

2016-12-01

A dual-alloy method was applied to tune the distribution of Ce for enhancing the performance of Nd-Ce-Fe-B sintered magnets with a nominal composition of (Nd{sub 0.75}Ce{sub 0.25}){sub 30.5}Fe{sub bal}Al{sub 0.1}Cu{sub 0.1}B. In comparison to the single alloy of (Nd{sub 0.75}Ce{sub 0.25}){sub 30.5}Fe{sub bal}Al{sub 0.1}Cu{sub 0.1}B, the coercivity was enhanced from 10.3 kOe to 12.1 kOe and the remanence was increased from 13.1 kG to 13.3 kG for the magnets with a dual-alloy method. In addition, the remanence temperature coefficient α and coercivity temperature coefficient β were also slightly improved for the magnet with the dual alloys. The results of microstructure characterizations show the uniform distribution of Ce for the magnet with a single alloy, and the coexistence of the Ce-rich and Ce-lean regions for the magnet with the dual alloys. In combinations with the nucleation of reversal domains and magnetic recoil curves, the property enhancement of magnets with a dual-alloy method was well explained. - Highlights: • Improved magnetic properties were obtained in dual-alloy magnet. • This is due to the tuning of Ce distribution and the change in microstructure. • The magnetic hardening effect can be observed in dual-alloy magnet.

Fabrication of Nano-CeO2 and Application of Nano-CeO2 in Fe Matrix Composites

International Nuclear Information System (INIS)

Tiebao, W.; Chunxiang, C.; Xiaodong, W.; Guobin, L.

2010-01-01

It is expatiated that nano-CeO2 is fabricated by the direct sedimentation method. The components and particles diameter of nano-CeO2 powders are analyzed by XRD and SEM . The thermodynamic analysis and acting mechanism of nano-CeO2 with Al in Fe matrix composites are researched, which shows that the reaction is generated between CeO2 and Al in the composite, that is, 3CeO2+4Al - 2Al2O3+3[Ce], which obtains Al2O3 and active [Ce] during the sintering process. The active [Ce] can improve the performance of CeO2/Fe matrix composites. The suitable amount of CeO2 is about 0.05% in CeO2/Fe matrix composites. SEM fracture analysis shows that the toughness sockets in nano-CeO2/Fe matrix composites are more than those in no-added nano-CeO2 composites, which can explain that adding nano-CeO2 into Fe matrix composite, the toughness of the composite is improved significantly. Applied nano-CeO2 to Fe matrix diamond saw blades shows that Fe matrix diamond saw blade is sharper and of longer cutting life than that with no-added nano-CeO2.

Biological reduction-deposition and luminescent properties of nanostructured CePO{sub 4}@NaCe(SO{sub 4}){sub 2}(H{sub 2}O) and CePO{sub 4}

Energy Technology Data Exchange (ETDEWEB)

Yu, Xiaoniu [School of Materials Science and Engineering, Southeast University, Nanjing 211189 (China); Research Institute of Green Construction Materials, Southeast University, Nanjing 211189 (China); Qian, Chunxiang, E-mail: cxqian@seu.edu.cn [School of Materials Science and Engineering, Southeast University, Nanjing 211189 (China); Research Institute of Green Construction Materials, Southeast University, Nanjing 211189 (China)

2016-03-01

Nano-sized CePO{sub 4}@NaCe(SO{sub 4}){sub 2}(H{sub 2}O) and CePO{sub 4} with hexagonal phase have been prepared by simply varying the reactant P/Ce molar ratio in bacterial liquid. The phase composition of two samples was checked via Fourier transform infrared spectroscopy (FTIR), energy dispersive analysis of X-rays (EDS) and X-ray diffraction (XRD) analyses, displaying the presence of CePO{sub 4}@NaCe(SO{sub 4}){sub 2}(H{sub 2}O) and CePO{sub 4} with average crystallite size are 32.34 and 15.61 nm, respectively. The scanning electron microscopy (SEM) images show that nano-clusters and sphere-like in shape with a narrow diameter distribution were observed in two samples. The transmission electron microscopy (TEM) photographs further indicate obtained CePO{sub 4}@NaCe(SO{sub 4}){sub 2}(H{sub 2}O) and CePO{sub 4} nanoparticles correspond to nanosheets and nanorods, respectively. The emission spectra of CePO{sub 4}@NaCe(SO{sub 4}){sub 2}(H{sub 2}O) and CePO{sub 4} display a broad band of 300–380 nm range with the strongest emission at 342 nm in the violet region. - Highlights: • A new method was found to synthesize CePO{sub 4}@NaCe(SO{sub 4}){sub 2}(H{sub 2}O) and CePO{sub 4} nanoparticles. • CePO{sub 4}@NaCe(SO{sub 4}){sub 2}(H{sub 2}O) nanoparticles have good luminescent properties. • Size and luminescent properties of two samples have been studied and compared.

Comment on “Synthesis of ceria (CeO{sub 2} and CeO{sub 2−x}) nanoparticles via decarbonation and Ce(III) oxidation of synthetic bastnaesite (CeCO{sub 3}F)” by Montes-Hernandez et al

Energy Technology Data Exchange (ETDEWEB)

Gysi, Alexander P., E-mail: agysi@mines.edu [Department of Geology and Geological Engineering, Colorado School of Mines, 1516 Illinois Street, Golden, CO, 80401 (United States); Williams-Jones, Anthony E. [Department of Earth and Planetary Sciences, McGill University, 3450 University Street, Montreal, QC, Canada, H3A 2A7 (Canada)

2016-11-01

Montes-Hernandez et al. [5] recently reported results of a study of the decarbonation of fine-grained synthetic bastnäsite-(Ce) precipitates involving the oxidation of Ce(III) to Ce(IV) and the formation of ceria (CeO{sub 2} and CeO{sub 2-x} with oxygen vacancies) nano-particles. The purpose of their study was to show that oxidation of Ce(III) to Ce(IV) occurs spontaneously during heating of bastnäsite-(Ce) in air, a vacuum, N{sub 2} or Ar gas. However, their interpretation of the formation of CeO{sub 2} is not supported by the findings of Gysi and Williams-Jones [3], who showed that natural bastnäsite-(Ce) decomposes to form rare earth element (REE) oxyfluorides (REEOF). The latter was documented using differential scanning calorimetric (DSC) and thermogravimetric (TGA) experiments under a deoxygenated N{sub 2} atmosphere. In their experiments, Gysi and Williams-Jones [3] found no evidence for the oxidation of Ce(III) to Ce(IV). This raises the question of whether the experiments of Montes-Hernandez et al. [5] in a N{sub 2} atmosphere (and by extension in an Ar atmosphere) were compromised because of contamination by O{sub 2} and that, as a result, they reached the erroneous conclusion that Ce(III) oxidizes spontaneously to Ce(IV) during heating of bastnäsite-(Ce) under these conditions. In order to explain the disagreement between their findings and those of Gysi and Williams-Jones [3], Montes-Hernandez et al. [5], proposed that the X-ray diffraction data of the former study were incorrectly interpreted. Here, we provide further evidence that the natural bastnäsite-(Ce) employed in the study by Gysi and Williams-Jones [3] decomposed to form REE oxyfluorides (i.e., CeOF, LaOF, PrOF and NdOF) and not CeO{sub 2}, and supply explanations for why Montes-Hernandez et al. [5] erroneously concluded that CeO{sub 2} is produced during decomposition of this mineral under N{sub 2} and Ar atmospheres. In so doing, we hope to provide new insights into the decomposition of

Magnetic and electronic properties in CeTSi3 and CeTGe3 (T: transition metal)

International Nuclear Information System (INIS)

Shimoda, T.; Okuda, Y.; Takeda, Y.; Ida, Y.; Miyauchi, Y.; Kawai, T.; Fujie, T.; Sugitani, I.; Thamizhavel, A.; Matsuda, T.D.; Haga, Y.; Takeuchi, T.; Nakashima, M.; Settai, R.; Onuki, Y.

2007-01-01

We investigated the magnetic properties of CeTSi 3 (T: Ru, Os, Co, Rh, Ir, Pd and Pt) and CeTGe 3 (T: Co, Rh and Ir) by measuring their electrical resistivity and magnetic susceptibility. CeRuSi 3 , CeOsSi 3 and CeCoSi 3 do not order magnetically, with a large Kondo temperature of about 200K. The other compounds order antiferromagnetically, and are very similar to each other in their magnetic and electronic properties, which is related to a large crystalline electric field (CEF) splitting energy of the 4f electron, about 500K in CeIrSi 3

Structural and magnetic properties of Ce/Fe and Ce/FeCoV multilayers

Energy Technology Data Exchange (ETDEWEB)

Tixier, S; Boeni, P [Paul Scherrer Inst. (PSI), Villigen (Switzerland); Mannix, D; Stirling, W G [Liverpool Univ. (United Kingdom); Lander, G H

1997-09-01

Ce/Fe and Ce/FeCoV multilayers have been grown by magnetron sputtering. The interfaces are well defined and the layers are crystalline down to an individual layer thickness of 20 A. Ce/FeCoV multilayers show sharper interfaces than Ce/Fe but some loss of crystallinity is observed. Hysteresis loops obtained by SQUID show different behaviour of the bulk magnetisation as a function of the layer thickness. Fe moments are found by Moessbauer spectroscopy to be perpendicular to the interfaces for multilayers with small periodicity. (author) 2 figs., 2 refs.

Inhibition of human carboxylesterases hCE1 and hiCE by cholinesterase inhibitors.

Science.gov (United States)

Tsurkan, Lyudmila G; Hatfield, M Jason; Edwards, Carol C; Hyatt, Janice L; Potter, Philip M

2013-03-25

Carboxylesterases (CEs) are ubiquitously expressed proteins that are responsible for the detoxification of xenobiotics. They tend to be expressed in tissues likely to be exposed to such agents (e.g., lung and gut epithelia, liver) and can hydrolyze numerous agents, including many clinically used drugs. Due to the considerable structural similarity between cholinesterases (ChE) and CEs, we have assessed the ability of a series of ChE inhibitors to modulate the activity of the human liver (hCE1) and the human intestinal CE (hiCE) isoforms. We observed inhibition of hCE1 and hiCE by carbamate-containing small molecules, including those used for the treatment of Alzheimer's disease. For example, rivastigmine resulted in greater than 95% inhibition of hiCE that was irreversible under the conditions used. Hence, the administration of esterified drugs, in combination with these carbamates, may inadvertently result in decreased hydrolysis of the former, thereby limiting their efficacy. Therefore drug:drug interactions should be carefully evaluated in individuals receiving ChE inhibitors. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Ce(III)/Ce(IV) in methanesulfonic acid as the positive half cell of a redox flow battery

International Nuclear Information System (INIS)

Leung, P.K.; Ponce de Leon, C.; Low, C.T.J.; Walsh, F.C.

2011-01-01

The characteristics of the Ce(III)/Ce(IV) redox couple in methanesulfonic acid were studied at a platinum disk electrode (0.125 cm 2 ) over a wide range of electrolyte compositions and temperatures: cerium (III) methanesulfonate (0.1-1.2 mol dm -3 ), methanesulfonic acid (0.1-5.0 mol dm -3 ) and electrolyte temperatures (295-333 K). The cyclic voltammetry experiments indicated that the diffusion coefficient of Ce(III) ions was 0.5 x 10 -6 cm 2 s -1 and that the electrochemical kinetics for the oxidation of Ce(III) and the reduction of Ce(IV) was slow. The reversibility of the redox reaction depended on the electrolyte composition and improved at higher electrolyte temperatures. At higher methanesulfonic acid concentrations, the degree of oxygen evolution decreased by up to 50% when the acid concentration increased from 2 to 5 mol dm -3 . The oxidation of Ce(III) and reduction of Ce(IV) were also investigated during a constant current batch electrolysis in a parallel plate zinc-cerium flow cell with a 3-dimensional platinised titanium mesh electrode. The current efficiencies over 4.5 h of the process Ce(III) to Ce(IV) and 3.3 h electrolysis of the reverse reaction Ce(IV) to Ce(III) were 94.0 and 97.6%, respectively. With a 2-dimensional, planar platinised titanium electrode (9 cm 2 area), the redox reaction of the Ce(III)/Ce(IV) system was under mass-transport control, while the reaction on the 3-dimensional mesh electrode was initially under charge-transfer control but became mass-transport controlled after 2.5-3 h of electrolysis. The effect of the side reactions (hydrogen and oxygen evolution) on the current efficiencies and the conversion of Ce(III) and Ce(IV) are discussed.

Qualitative evaluation of environmental radiological impact in a phosphate associated uranium conventional mine: Santa Quiteria Project, CE, Brazil; Avaliacao qualitativa do impacto radiologico ambiental em uma mineracao convencional de fosfato com uranio associado: o Projeto Santa Quiteria

Energy Technology Data Exchange (ETDEWEB)

Reis, Rocio G. dos; Santo, Aline Sa E., E-mail: rocio@ird.gov.br, E-mail: alinesah@ird.gov.br [Instituto de Radioprotecao e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil)

2013-07-01

The aim of this study is to identify and evaluate qualitatively the main potential sources of mineral and installation terms of Santa Quiteria, CE, Brazil, evaluating their possible impacts on the environment. The key terms sources in the production of phosphoric acid are usually: the dig of the mines, tailings dams and phospho plaster stack. Thus, this work intends to inform the academic community about this issue, as well as the population in general and also, acting proactively in order to warn about the possible environmental impacts, so that actions to compensate, minimize or avoid these radiological impacts on the environment, can be included in the planning of the industrial mineral project of Santa Quiteria (author)

Rare earth elements in a uranium deposit in Pedra, Pernambuco, Brazil

International Nuclear Information System (INIS)

Damascena, Kennedy Francys Rodrigues; Amaral, Romilton dos Santos; Santos Junior, Jose Araujo dos; Bezerra, Jairo Dias; Oliveira, Iane Andrade de; Silva, Alberto Antonio da

2013-01-01

Rare Earth Elements (REEs) are similar in the physical and chemical properties of their compounds and are most commonly found in nature associated with terrestrial radionuclides. The high interest in conducting research on REEs is due to their multiple applications and high economic value. In this light, the present study analyzed samples of soil and rocks from an anomalous area replete with uranium and thorium, in the town of Pedra, Pernambuco, Brazil, in an attempt to identify the occurrence and concentrations of these elements. For these analyses, neutron activation, followed by high-resolution gamma spectrometry, was used to define the REEs. The following REEs were identified in the study area: La, Ce, Nd, Sm, Eu, Tb, Yb, Lu, and Sc. The most abundant elements in the region, within samples of soil and rock, respectively, were: Ce (63-503 mg.kg -1 / 19.6 to 2243.5 mg.kg -1 ), Nd (25.0 to 249.0 mg.kg -1 / 3.8 to 1951.0 mg.kg -1 ), and La (30.6 to 253.0 mg.kg -1 / 12.1 to 517.0 mg.kg -1 ). The other REEs presented concentrations of between the detection limit and 46.0 mg.kg -1 . The results indicate that the Ce, La, and Nd concentrations appeared in up to 12 times the average occurrences in the earth's crust and up to 4.6 times higher than the averages reported in studies worldwide, including Brazil. Therefore, further studies are warranted to examine the economic viability of REEs in the area and to confirm the occurrence of these anomalous elements in the studied region. (author)

PREVALENCE OF CHAGAS DISEASE IN A RURAL AREA IN THE STATE OF CEARA, BRAZIL

Directory of Open Access Journals (Sweden)

Erlane Chaves FREITAS

2015-10-01

Full Text Available SUMMARY Chagas disease is caused by Trypanosoma cruzi and affects about two to three million people in Brazil, still figuring as an important public health problem. A study was conducted in a rural area of the municipality of Limoeiro do Norte - CE, northeastern Brazil, aiming to determine the prevalence of T. cruzi infection. Of the inhabitants, 52% were examined, among whom 2.6% (4/154 were seropositive in at least two serological tests. All seropositive individuals were older than 50 years, farmers, with a low education and a family income of less than three minimum wages. Active surveillance may be an alternative for early detection of this disease.

Different magnetic behaviour of the Kondo compounds Al3Ce and Al11Ce3

International Nuclear Information System (INIS)

Benoit, A.; Flouquet, J.; Palleau, J.; Buevoz, J.L.

1979-08-01

Neutron diffraction experiments on the Al 3 Ce and Al 11 Ce 3 compounds have been performed on the multidetector of the I.L.L. high flux reactor. No magnetic structure has been detected on the Al 3 Ce compound down to 20 mK. This confirms the non magnetic ground state of Al 3 Ce. For Al 11 Ce 3 , two magnetic structures have been observed: a ferromagnetic one at 4.2 K and an antiferromagnetic one at 2 K. The antiferromagnetic structure, which corresponds to a propagation vector (0,0,1/3), implies a strong reduction of the magnetic moment of determined sites; this reflects the Kondo character of the compounds

Comparison of Spectral and Scintillation Properties of LuAP:Ce and LuAP:Ce,Sc Single Crystals

Science.gov (United States)

Petrosyan, Ashot G.; Derdzyan, Marina; Ovanesyan, Karine; Shirinyan, Grigori; Lecoq, Paul; Auffray, Etiennette; Kronberger, Matthias; Frisch, Benjamin; Pedrini, Christian; Dujardin, Christophe

2009-10-01

Scintillation properties of LuAP:Ce and LuAP:Ce,Sc crystal series were studied under excitation by gamma-rays from a 137Cs source. Both series demonstrated comparable optical quality in terms of underlying absorption at 260 nm, slope of the optical edge and transmission in the range of emission. The light yield of LuAP:Ce crystals measured in 0.2 cm times 0.2 cm times 0.8 cm pixels increases linearly with the Ce concentration reaching at 0.58 at. % 6448 plusmn 322 ph/MeV and 9911 plusmn 496 ph/MeV in the long and in the short directions respectively (the light yield ratio is 65%) and shows no sign of light saturation. The energy resolution is found to depend, among other factors, on the uniformity of Ce concentration within the pixels and is improved to 7.1 plusmn 0.4% (I = 0.2 cm), 9.5 plusmn 0.5% (I = 0.8 cm). Intentional co-doping with Sc + ions was tested and resulted in increase of the Ce distribution coefficient to about 0.3. This enabled to increase the concentration of Ce in LuAP:Ce,Sc crystals up to 0.7 at. %, while conserving high optical quality. In contrast to LuAP:Ce, the light yield in LuAP:Ce,Sc crystals does not increase with Ce concentration, the photo peak being gradually suppressed. The involved mechanisms are discussed basing on measurements of the unit cell volumes, Ce concentration uniformity, x-ray rocking spectra, absorption spectra of pure and variously doped LuAP crystals, and emission spectra under different excitations.

Prevalência de asma em adolescentes na cidade de Fortaleza, CE Prevalence of asthma among adolescents in the city of Fortaleza, Brazil

Directory of Open Access Journals (Sweden)

Maria de Fátima Gomes de Luna

2009-11-01

Full Text Available OBJETIVO: Avaliar a prevalência de asma em adolescentes (13-14 anos na cidade de Fortaleza, CE. MÉTODOS: Estudo transversal utilizando o questionário do International Study of Asthma and Allergies in Childhood e envolvendo 3.015 adolescentes de escolas públicas e privadas entre 2006 e 2007. RESULTADOS: As prevalências de "sibilos alguma vez na vida", "sibilos nos últimos doze meses" (asma ativa e "asma alguma vez na vida" (asma diagnosticada foram, respectivamente, 44,1%, 22,6% e 11,6%. As prevalências de "sibilos alguma vez na vida" (p = 0,001, "1-3 crises de sibilos nos últimos 12 meses" (p = 0,001; asma ativa (p = 0,002; "sono interrompido por sibilos menos que uma vez por semana" (p OBJECTIVE: To determine the prevalence of asthma among adolescents (13-14 years of age in the city of Fortaleza, Brazil. METHODS: This was a cross-sectional study involving 3,015 adolescents at public and private schools between 2006 and 2007. The participants completed the International Study of Asthma and Allergies in Childhood questionnaire. RESULTS: The prevalences of "wheezing ever", "wheezing within the last 12 months" (active asthma and "asthma ever" (physician-diagnosed asthma were 44.1%, 22.6% and 11.6%, respectively. The prevalences of "wheezing ever" (p = 0.001, "1-3 wheezing attacks within the last 12 months" (p = 0.001, active asthma (p = 0.002, "sleep disturbed due to wheezing less than one night per week" (p < 0.001 and "dry cough at night" (p < 0.001 were higher among girls. Private school students presented higher prevalences of "wheezing ever", active asthma, "1-3 wheezing attacks within the last 12 months", "4-12 wheezing attacks within the last 12 months" and physician-diagnosed asthma (p < 0.001 for all, as well as of "exercise-induced wheezing" (p = 0.032. CONCLUSIONS: The prevalence of asthma and asthma-related symptoms in students aged 13-14 years in the city of Fortaleza, Brazil, was high, predominantly among girls and private

Diversity of Scarabaeinae (Coleoptera: Scarabaeidae in the Ceará Botanical Park, Caucaia - CE, Brazil = Diversidade de Scarabaeinae (Coleoptera: Scarabaeidae no Parque Botânico do Ceará, Caucaia - CE, Brasil

Directory of Open Access Journals (Sweden)

Maria Goretti Araújo Lima

2013-04-01

Full Text Available Abstract - The objective of this study was to survey and analyze richness, abundance, equitability and diversity of Scarabaeinae species in two different environments, Carnaúba Riparian Forest and in Tabuleiro Forest in Ceará Botanic Park, Caucaia - CE, Brazil. Samples were collected monthly during the period from March to November 2008. To capture the scarabs were used 48 traps Pitfall, baited with human feces, being 24 traps in each area, distributed in two parallel transects constituted by twelve traps. Were collected at the end of the survey 5382 subfamily Scarabaeinae specimens belonging to five tribes, nine gender and 11 species. In Carnaúba Riparian Forest 3175 insects were found distributed in seven species. In Tabuleiro Forest were collected 2207 specimens belonging to 10 species. Six species occurred in both areas, one only in Riparian Forest and four in Tabuleiro Forest. Uroxys sp. was the most abundant species in both areas (35.2%, followed by Sylvicanthon sp. (31.9% and Canthidium sp.2 (16.7%. The Tabuleiro Forest showed greater wealth and Carnaúba Riparian Forest greater abundance. The observed diversity broadens the information about the community of Scarabaeinae in the state of Ceará. = Resumo - Objetivou-se com o presente trabalho realizar levantamento e análise da riqueza, abundância, equitabilidade e diversidade das espécies de Scarabaeinae em dois ambientes, Mata Ciliar de Carnaúba e Mata de Tabuleiro, no Parque Botânico do Ceará, Caucaia – CE, Brasil. As coletas foram realizadas mensalmente durante o período de março a novembro de 2008. Para captura dos escarabeídeos foram utilizadas 48 armadilhas de solo tipo “Pitfall”, iscadas com fezes humanas, sendo 24 armadilhas em cada área, distribuídas em dois transectos paralelos constituídos por doze armadilhas. Foram coletados ao final do levantamento 5.382 espécimes da subfamília Scarabaeinae pertencentes a cinco tribos, nove gêneros e 11 espécies. Na

CeO2-stabilized tetragonal ZrO2 polycrystals (Ce-TZP ceramics)

International Nuclear Information System (INIS)

Andrade Nono, M.C. de.

1990-12-01

This work presents the development and the characterization of CeO 2 -stabilized tetragonal ZrO 2 polycrystals (Ce-TZP ceramics), since it is considered candidate material for applications as structural high performance ceramics. Sintered ceramics were fabricated from mixtures of powders containing different CeO 2 content prepared by conventional and nonconventional techniques. These powders and their resultant sintered ceramics were specified by chemical and physical characterization, compactation state and mechanical properties. The chemical characteristics were determined by chemical analysis and the physical characteristics were evaluated by phase content, particle and agglomerate size and aspect, and powder porosity. (author)

Magnetic behaviour of new Ce compounds

Energy Technology Data Exchange (ETDEWEB)

Sampathkumaran, E V [Tata Inst. of Fundamental Research, Bombay (India); Mallik, R [Tata Inst. of Fundamental Research, Bombay (India)

1996-07-01

We report initial results of our investigation on the magnetic behaviour of some new Ce compounds. The compounds, CeIr{sub 2}B{sub 2}C and CeIr{sub 2}Ge{sub 2}, do not appear to exhibit bulk magnetic ordering down to 2 K. The alloys, Ce{sub 2}Pd{sub 2}In and Ce{sub 2}Cu{sub 2}In, order magnetically below 4 and 6 K, respectively, and a marginal change in the Pd(Cu)/In composition does not significantly influence the ordering temperatures. (orig.).

Optical and scintillation properties of Ce-doped LuLiF4 with different Ce concentrations

International Nuclear Information System (INIS)

Yanagida, Takayuki; Fujimoto, Yutaka; Fukuda, Kentaro; Chani, Valery

2013-01-01

The crystals of 0.1, 0.5, and 1 mol% Ce-doped LuLiF 4 (Ce:LLF) grown by the micro-pulling down (μ-PD) method were examined for their optical and scintillation properties. Ce:LLF crystals had ∼80% transparency at wavelengths longer than 300 nm. In photoluminescence spectra, they demonstrated intense emission peaks at 310 and 330 nm with the quantum yield of 60–90%. Ce 3+ 5d–4f emission peaks were also detected at similar wavelengths of 310 and 330 nm in the radioluminescence spectra obtained under X-ray excitation. According to pulse height spectra recorded under γ-ray irradiation, the absolute light yield of Ce 0.1, 0.5, and 1% were 3600±400, 3000±300, and 1700±200 ph/MeV, respectively. Decay time kinetics was also inspected using a pulse X-ray equipped streak camera system. The decay time components of Ce:LLF were ∼70 ns and ∼1 μs for all the samples

Production of 139Ce by the 139La(p,n)139Ce reaction

International Nuclear Information System (INIS)

Ishioka, Noriko S.; Sekine, Toshiaki; Izumo, Mishiroku; Hashimoto, Kazuyuki; Kobayashi, Katsutoshi; Matsuoka, Hiromitsu

2002-01-01

To produce a carrier-free 139 Ce to be used as an efficiency-calibration source for Ge detectors, a target-preparation method and a chemical separation method were studied. It was found that commercially available powders of lanthanum-oxide and lanthanum metal are applicable to a target material in the nuclear reaction 139 La(p,n) 139 Ce. In the separation of 139 Ce from an irradiated lanthanum target, a solvent-extraction method and an ion-exchange method gave final products in good chemical purity. (author)

Effect of yttrium on electron–phonon coupling strength of 5d state of Ce3+ ion in LYSO:Ce crystals

International Nuclear Information System (INIS)

Ding, Dongzhou; Liu, Bo; Wu, Yuntao; Yang, Jianhua; Ren, Guohao; Chen, Junfeng

2014-01-01

This paper aims at an improved understanding of luminescence properties of (Lu 1−x Y x ) 2 SiO 5 :Ce (x=0 at%, 26 at%, 45 at%, 66 at% and 100 at%). Photoluminescence emission and excitation spectra as well as Raman spectra of (Lu 1−x Y x ) 2 SiO 5 :Ce were investigated as a function of yttrium (shortened as Y) content in it. Obtained Huang–Rhys factor S indicates that the coupling between Ce1 (7-oxygen-coordinated), Ce2 (6-oxygen-coordinated) and LYSO lattice is intermediate and strong, respectively. Besides, it was found that: with the increase of Y content, crystal field strength around Ce1 and Ce2 decreases, Stokes shift of Ce1 and Ce2 presents an increase trend, and S of Ce2 tends to decrease. These phenomena were explained by geometrical influence of Y 3+ /Lu 3+ on the crystal field splitting of the 5d levels of Ce 3+ and coupling strength. With the increase of Y content, the evolution of S and coupling energy ħω of Ce1 present a slight increase and decrease trend respectively, while S and coupling energy ħω of Ce2 present an obvious decrease and increase trend, respectively. - Highlights: • Crystal field strength around Ce1 decreases with increase of Y content in LYSO:Ce. • A diagram of Huang–Rhys factor S against Y content in LYSO:Ce was constructed. • A diagram of coupling energy ħω against Y content in LYSO:Ce was constructed. • A diagram of Stokes shift against Y content in LYSO:Ce was constructed

Influence of some ions on the flotation of apatite from Itataia, in Brazil

International Nuclear Information System (INIS)

Aquino, J.A. de.

1987-01-01

The influence of ionic composition in the water from Itataia dam in flotation process for phosphate recovery contained in the ore from Itataia reserve CE, in Brazil, is studied. A water treatment system to assure levels of content and recovery obtained during ore dressing stage is defined. Laboratory tests to verify variation of P 2 O 5 recovery in function of different ion concentration were done. (M.C.K.) [pt

Physico-chemical properties of (U,Ce)O2

International Nuclear Information System (INIS)

Yamada, K.; Yamanaka, S.; Katsura, M.

1998-01-01

The high-temperature X-ray diffraction analysis of (U,Ce)O 2 with CeO 2 contents ranging from 0 to 20 mol.% CeO 2 was performed to obtain the variation of the linear thermal expansion coefficient with the CeO 2 content. Ultrasonic pulse-echo measurements were also carried out from room temperature to 673 K to estimate the change in the mechanical properties of (U,Ce)O 2 with the CeO 2 content. The variation in the linear thermal expansion coefficient at the low CeO 2 content region is more steep than that expected from the linear thermal expansion coefficient of UO 2 and CeO 2 . The Young's and shear moduli of all (U,Ce)O 2 were found to decrease with rising temperature. This was due to the increase of the bond length accompanied by the thermal expansion. Although the lattice parameter decreased with CeO 2 content, the moduli of (U,Ce)O 2 were found to decrease with increasing CeO 2 content at room temperature. These results show that in the range from 0 to 20 mol.% of CeO 2 , as CeO 2 content increases, the bottom of the potential energy in (U,Ce)O 2 is shallower and broader. (orig.)

Comparison between the Oxygen Reduction Reaction Activity of Pd₅Ce and Pt₅Ce

DEFF Research Database (Denmark)

Tripkovic, Vladimir; Zheng, Jian; Rizzi, Gian Andrea

2015-01-01

A set of electrochemical and X-ray spectroscopy measurements have been used conjointly with density functional theory (DFT) simulations to study the activity and stability of Pd5Ce for the oxygen reduction reaction. A polycrystalline Pd5Ce rod has been selected as a model catalyst to test if resu......-Pd5Ce is more facile, requires less atom rearrangement, than transformation from Pt5Ce to Pt3Ce, which might explain the kinetic stability of Pt5Ce at low temperatures....

Dependence of the Ce(iii)/Ce(iv) ratio on intracellular localization in ceria nanoparticles internalized by human cells

KAUST Repository

Ferraro, Daniela

2017-01-09

CeO2 nanoparticles (CNPs) have been investigated as promising antioxidant agents with significant activity in the therapy of diseases involving free radicals or oxidative stress. However, the exact mechanism responsible for CNP activity has not been completely elucidated. In particular, in situ evidence of modification of the oxidative state of CNPs in human cells and their evolution during cell internalization and subsequent intracellular distribution has never been presented. In this study we investigated modification of the Ce(iii)/Ce(iv) ratio following internalization in human cells by X-ray absorption near edge spectroscopy (XANES). From this analysis on cell pellets, we observed that CNPs incubated for 24 h showed a significant increase in Ce(iii). By coupling on individual cells synchrotron micro-X-ray fluorescence (μXRF) with micro-XANES (μXANES) we demonstrated that the Ce(iii)/Ce(iv) ratio is also dependent on CNP intracellular localization. The regions with the highest CNP concentrations, suggested to be endolysosomes by transmission electron microscopy, were characterized by Ce atoms in the Ce(iv) oxidation state, while a higher Ce(iii) content was observed in regions surrounding these areas. These observations suggest that the interaction of CNPs with cells involves a complex mechanism in which different cellular areas play different roles.

Dependence of the Ce(iii)/Ce(iv) ratio on intracellular localization in ceria nanoparticles internalized by human cells

KAUST Repository

Ferraro, Daniela; Tredici, Ilenia G.; Ghigna, Paolo; Castillio-Michel, Hiram; Falqui, Andrea; Di Benedetto, Cristiano; Alberti, Giancarla; Ricci, Vittorio; Anselmi-Tamburini, Umberto; Sommi, Patrizia

2017-01-01

CeO2 nanoparticles (CNPs) have been investigated as promising antioxidant agents with significant activity in the therapy of diseases involving free radicals or oxidative stress. However, the exact mechanism responsible for CNP activity has not been completely elucidated. In particular, in situ evidence of modification of the oxidative state of CNPs in human cells and their evolution during cell internalization and subsequent intracellular distribution has never been presented. In this study we investigated modification of the Ce(iii)/Ce(iv) ratio following internalization in human cells by X-ray absorption near edge spectroscopy (XANES). From this analysis on cell pellets, we observed that CNPs incubated for 24 h showed a significant increase in Ce(iii). By coupling on individual cells synchrotron micro-X-ray fluorescence (μXRF) with micro-XANES (μXANES) we demonstrated that the Ce(iii)/Ce(iv) ratio is also dependent on CNP intracellular localization. The regions with the highest CNP concentrations, suggested to be endolysosomes by transmission electron microscopy, were characterized by Ce atoms in the Ce(iv) oxidation state, while a higher Ce(iii) content was observed in regions surrounding these areas. These observations suggest that the interaction of CNPs with cells involves a complex mechanism in which different cellular areas play different roles.

Adduct formation in Ce(IV) thenolytrifluoroacetonate

International Nuclear Information System (INIS)

Anufrieva, S.I.; Polyakova, G.V.; Snezhko, N.I.; Pechurova, N.I.; Martynenko, L.I.; Spitsyn, V.I.

1982-01-01

The literature contains no information on adduct formation in Ce(IV) β-diketonates with additional ligands. Since tetrakis-β-diketonates of Ce(IV) have four six-membered chelate rings, we can suppose that the introduction of an additional monodentate or bidentate ligand into the coordination sphere of Ce(IV) β-diketonates would lead to an increase in the coordination number (CN) of the Ce(IV) to nine or ten. The possibility of realization of such a high CN for Ce(IV) has not been proved; a study of adduct formation by Ce(IV) tetrakis-β-diketonates is thus of theoretical interest. Such an investigation might also be of practical interest, because the introduction of an additional ligand into the coordination sphere of a rare-earth β-diketonate usually increases the solubility of the β-diketonate in nonpolar solvents and increases the volatility of the compound; such a modification of the properties is important for various practical purposes. The aim of our work was to study the possibility of separating solid adducts of Ce(IV) tetrakis-thenoyltrifluoroacetonate with certain oxygen-containing and nitrogen-containing donor monodentate and bidentate ligands, and also to investigate their properties. As the β-diketone we used thenoyltrifluoroacetone (HTTFA), since in a parallel investigation it was found that Ce(TTFA) 4 has a high oxidation-reduction stability

Peculiarities of the intermediate valence state of Ce in CeM2Si2 (M = Fe, Co, Ni) compounds

International Nuclear Information System (INIS)

Koterlyn, M.; Shcherba, I.; Yasnitskii, R.; Koterlyn, G.

2007-01-01

The results of thermoelectric power and the electrical resistivity measurements connected with the intermediate valence (IV) of Ce are presented for the compounds CeM 2 Si 2 (M = Fe, Co, Ni) in the temperature range of 4-800 K. It is shown that CeM 2 Si 2 are Kondo-lattices with the coherence scale T coh ∼ 60-80 K and the so-called single-site Kondo temperature T K ∼ 10 3 K. On the example of CeNi 2 Si 2 we have studied the changes in the structure of density of f states (f-DOS) near the Fermi energy caused by atomic substitutions. The results of structural, transport, magnetic, and Ce L III X-ray absorption spectra measurements in the series Ce 1-x La x Ni 2 Si 2 (0 ≤ x ≤ 0.6), Ce(Ni 1-y Cu y ) 2 Si 2 (0 ≤ y ≤ 0.6) and CeNi 2 (Si 1-z Ge z ) 2 (0 ≤ z ≤ 0.5) are presented. We found that the IV state of Ce in the CeM 2 Si 2 is an evidence of possible opening a wide pseudogap Δ ∼ kT K within the f-DOS structure slightly above the Fermi energy

Surface and bulk 4f-photoemission spectra of CeIn3 and CeSn3

International Nuclear Information System (INIS)

Kim, H.; Tjernberg, O.; Chiaia, G.; Kumigashira, H.; Takahashi, T.; Duo, L.; Sakai, O.; Kasaya, M.; Lindau, I.

1997-01-01

Resonant photoemission spectroscopy was performed on CeIn 3 and CeSn 3 at the 4d-4f and 3d-4f core thresholds. Using the different surface sensitivity between the two photon energies, surface and bulk 4f-photoemission spectra were derived for both compounds. With the noncrossing approximation of the Anderson impurity model, the 4d-4f resonant spectra together with the surface and bulk spectra were self-consistently analyzed to obtain the microscopic parameters such as the 4f-electron energy and the hybridization strength with conduction electrons. The result shows a substantial difference in these parameters between the surface and the bulk, indicating that it is important to take into account the surface effect in analyzing photoemission spectra of Ce compounds. It is also found that the 4f surface core-level shift is different between CeIn 3 and CeSn 3 . copyright 1997 The American Physical Society

Optical and scintillation properties of Ce-doped LuLiF{sub 4} with different Ce concentrations

Energy Technology Data Exchange (ETDEWEB)

Yanagida, Takayuki, E-mail: yanagida@lsse.kyutech.ac.jp [Kyushu Institute of Technology, 2-4 Hibikino, Wakamatsu-ku, Kitakyushu, Fukuoka 808-0196 (Japan); Fujimoto, Yutaka [Kyushu Institute of Technology, 2-4 Hibikino, Wakamatsu-ku, Kitakyushu, Fukuoka 808-0196 (Japan); Fukuda, Kentaro [Tokuyama Corporation, Shibuya 3-chome, Shibuya-ku, Tokyo 150-8383 Japan (Japan); Chani, Valery [Tohoku Univ., 2-1-1 Katahira, Sendai 980-8577 (Japan)

2013-11-21

The crystals of 0.1, 0.5, and 1 mol% Ce-doped LuLiF{sub 4} (Ce:LLF) grown by the micro-pulling down (μ-PD) method were examined for their optical and scintillation properties. Ce:LLF crystals had ∼80% transparency at wavelengths longer than 300 nm. In photoluminescence spectra, they demonstrated intense emission peaks at 310 and 330 nm with the quantum yield of 60–90%. Ce{sup 3+} 5d–4f emission peaks were also detected at similar wavelengths of 310 and 330 nm in the radioluminescence spectra obtained under X-ray excitation. According to pulse height spectra recorded under γ-ray irradiation, the absolute light yield of Ce 0.1, 0.5, and 1% were 3600±400, 3000±300, and 1700±200 ph/MeV, respectively. Decay time kinetics was also inspected using a pulse X-ray equipped streak camera system. The decay time components of Ce:LLF were ∼70 ns and ∼1 μs for all the samples.

The crystal structure of galgenbergite-(Ce), CaCe2(CO3)4•H2O

Science.gov (United States)

Walter, Franz; Bojar, Hans-Peter; Hollerer, Christine E.; Mereiter, Kurt

2013-04-01

Galgenbergite-(Ce) from the type locality, the railroad tunnel Galgenberg between Leoben and St. Michael, Styria, Austria, was investigated. There it occurs in small fissures of an albite-chlorite schist as very thin tabular crystals building rosette-shaped aggregates associated with siderite, ancylite-(Ce), pyrite and calcite. Electron microprobe analyses gave CaO 9.49, Ce2O3 28.95, La2O3 11.70, Nd2O3 11.86, Pr2O3 3.48, CO2 30.00, H2O 3.07, total 98.55 wt.%. CO2 and H2O calculated by stoichiometry. The empirical formula (based on Ca + REE ∑3.0) is C{{a}_{1.00 }}{{( {C{{e}_{1.04 }}L{{a}_{0.42 }}N{{d}_{0.42 }}P{{r}_{0.12 }}} )}_{2.00 }}{{( {C{{O}_3}} )}_4}\\cdot {{H}_2}O , and the simplified formula is CaC{{e}_2}{{( {C{{O}_3}} )}_4}\\cdot {{H}_2}O . According to X-ray single crystal diffraction galgenbergite-(Ce) is triclinic, space group Poverline{1},a=6.3916(5) , b = 6.4005(4), c = 12.3898(9) Å, α = 100.884(4), β = 96.525(4), γ = 100.492(4)°, V = 483.64(6) Å3, Z = 2. The eight strongest lines in the powder X-ray diffraction pattern are [ d calc in Å/( I)/ hkl]: 5.052/(100)/011; 3.011/(70)/0-22; 3.006/(66)/004; 5.899/(59)/-101; 3.900/(51)/1-12; 3.125/(46)/-201; 2.526/(42)/022; 4.694/(38)/-102. The infrared absorption spectrum reveals H2O (OH-stretching mode at 3,489 cm-1, HOH bending mode at 1,607 cm-1) and indicates the presence of distinctly non-equivalent CO3-groups by double and quadruple peaks of their ν1, ν2, ν3 and ν4 modes. The crystal structure of galgenbergite-(Ce) was refined with X-ray single crystal data to R1 = 0.019 for 2,448 unique reflections ( I > 2 σ( I)) and 193 parameters. The three cation sites of the structure Ca(1), Ce(2) and Ce(3) have a modest mixed site occupation by Ca and small amount of REE (Ce, La, Pr, Nd) and vice versa. The structure is based on double layers parallel to (001), which are composed of Ca(1)Ce(2)(CO3)2 single layers with an ordered chessboard like arrangement of Ca and Ce, and with a roof tile

Iron oxides and monazite from sands of two beaches in Espirito Santo, Brazil

International Nuclear Information System (INIS)

Coelho, Flavia dos Santos; Couceiro, Paulo Rogerio da Costa; Lopes, Ana Lucia; Fabris, Jose Domingos

2005-01-01

Sand samples collected from two sampling sites on Guarapari and Iriri beaches, state of Espirito Santo, Brazil, were studied in an attempt to better describe their chemical and mineralogical compositions and radioactive behaviors. The sands were found to contain about 6 (Guarapari) and 2 dag kg -1 (Iriri) of rare earth and thorium that, if allocated to the monazite-(Ce) structure, lead to the averaged formulae Ce 3+ 0,494G d 3+ 0,012 La 3+ 0,209 Nd 3+ 0,177 Pr 3+ 0,040 Sm 3+ 0,024 Th 4+ 0,033 (PO 4 ) and Ce 3+ 0,474 La 3+ 0,227 Nd 3+ 0,190 Pr 3+ 0,044 Sm 3+ 0,032 Th 4+ 0,024 (PO 4 ). From Moessbauer spectroscopy data, the magnetic fractions of these sands were found to contain stoichiometric hematite (47.4 dag kg -1 , from Guarapari, and 25.1 dag kg -1 , from Iriri) and magnetite (44.1 and 58.8 dag kg -1 ). The specific α and β radiation activities were also measured for both samples. (author)

Some regularities of Ce(3) and Ce(4) stabilization in their compounds with β-diketones

International Nuclear Information System (INIS)

Pechurova, N.I.; Martynenko, L.I.; Snezhko, N.I.; Anufrieva, S.I.

1985-01-01

Adduct formation of cerium (3) and cerium (4) β-diketonates (acetylacetonate, benzoylacetonate, dibenzoylmethanate and thenoyltrifluoroacetonate) with oxygen- and nitrogen-donor ligands (Q-α, α'-dipyridyl, o-phenanthroline, trioctylphosphine oxide and triphenylphosphine oxide) is studied. The compounds obtained as a results of the reactions are studied by means of IR-spectroscopic, derivatographic and X-ray phase methods. It is concluded that composition and thermodynamic stability of adducts of Ce(3) tris-β-diketonates are determined by correlation of donor properties of the basis and additional ligand and stability of adducts to oxidation - as well as by their solubility. Introduction of the additional ligand to the system Ce(4)-β-diketones even in the presence of air oxygen stabilizes Ce(3) and destabilizes Ce(4)

Unstable magnetic moments in Ce compounds

International Nuclear Information System (INIS)

Aarts, J.

1984-01-01

The problems which are connected with the appearance or disappearance of local moments in metals are well reflected in the magnetic behaviour of Ce intermetallic compounds. This work describes experiments on two Ce compounds which are typical examples of unstable moment systems. The first of these is CeAl 2 which at low temperatures, shows coexistence of antiferromagnetic order and the Kondo effect. Measurements are presented of the magnetization and the susceptibility in different magnetic field and temperature regions. An analysis of these measurements, using a model for the crystal field effects, shows the agreement between the measurements and the calculations to be reasonably good for CeAl 2 , but this agreement becomes worse upon decreasing Ce concentration. A phenomenological description of the observations is given. The second compound reported on is CeCu 2 Si 2 , the first 'heavy-fermion' superconductor to be investigated. The superconducting state is possibly formed by the quasi-particles of a non-magnetic many body singlet state, and not simply by the (sd) conduction electrons. This being a novel phenomenon, a number of experiments were performed to test this picture and to obtain a detailed description of the behaviour of CeCu 2 Si 2 . Measurements of the Meissner volume, confirmed the superconductivity to be intrinsic. (Auth.)

Ce decay curves in Ce, Tb co-doped LaF3 and the energy transfer mechanism

International Nuclear Information System (INIS)

Kroon, R.E.; Swart, H.C.; Ntwaeaborwa, O.M.; Seed Ahmed, H.A.A.

2014-01-01

Energy transfer phenomena can play an important role in the development of luminescent materials, and hosts co-doped with Ce 3+ and Tb 3+ ions continue to be actively studied. Several recent reports on Ce, Tb co-doped phosphors suggest different mechanisms for the energy transfer from Ce 3+ to Tb 3+ ions and further study is required to reach consensus on the mechanism or to understand why different mechanisms dominate in different hosts. A more direct method of analysis is proposed to distinguish between the different types of multipole energy transfer mechanisms. When applied to Ce, Tb co-doped LaF 3 , the experimental data shows a poor match to any of these models but is consistent with energy transfer through the exchange mechanism. The decay curves of Ce emission in Ce, Tb co-doped LaF 3 were also studied to obtain further insight on the energy transfer mechanism. Although the decrease in lifetime with increasing Tb concentration shows that energy transfer occurs through a non-radiative mechanism, the form of the decay curves does not correspond to what is expected for energy transfer via multipole interactions.

Homoleptic Ce(III) and Ce(IV) Nitroxide Complexes: Significant Stabilization of the 4+ Oxidation State

Energy Technology Data Exchange (ETDEWEB)

Bogart, Justin A.; Lewis, Andrew J.; Medling, Scott A.; Piro, Nicholas A.; Carroll, Patrick J.; Booth, Corwin H.; Schelter, Eric J.

2014-06-25

Electrochemical experiments performed on the complex Ce-IV[2-((BuNO)-Bu-t)py](4), where [2-((BuNO)-Bu-t)py](-) = N-tert-butyl-N-2-pyridylnitroxide, indicate a 2.51 V stabilization of the 4+ oxidation state of Ce compared to [(Bu4N)-Bu-n](2)[Ce(NO3)(6)] in acetonitrile and a 2.95 V stabilization compared to the standard potential for the ion under aqueous conditions. Density functional theory calculations suggest that this preference for the higher oxidation state is a result of the tetrakis(nitroxide) ligand framework at the Ce cation, which allows for effective electron donation into, and partial covalent overlap with, vacant 4f orbitals with delta symmetry. The results speak to the behavior of CeO2 and related solid solutions in oxygen uptake and transport applications, in particular an inherent local character of bonding that stabilizes the 4+ oxidation state. The results indicate a cerium(IV) complex that has been stabilized to an unprecedented degree through tuning of its ligand-field environment.

The role of Ce(III) in BZ oscillating reactions

Science.gov (United States)

Nogueira, Paulo A.; Varela, Hamilton; Faria, Roberto B.

2012-03-01

Herein we present results on the oscillatory dynamics in the bromate-oxalic acid-acetone-Ce(III)/Ce(IV) system in batch and also in a CSTR. We show that Ce(III) is the necessary reactant to allow the emergence of oscillations. In batch, oscillations occur with Ce(III) and also with Ce(IV), but no induction period is observed with Ce(III). In a CSTR, no oscillations were found using a freshly prepared Ce(IV), but only when the cerium-containing solution was aged, allowing partial conversion of Ce(IV) to Ce(III) by reaction with acetone.

Promoting effect of CeO 2 on cyclohexanol conversion over CeO 2

Indian Academy of Sciences (India)

Abstract. CeO2-ZnO materials were prepared by amorphous citrate process and characterized by TGA, XRD, UV-DRS and surface area measurements. TGA showed that the citrate precursors decompose in the range 350-550°C producing CeO2-containing catalytic materials. XRD and DRS results indicated the formation of ...

A facile synthesis for cauliflower like CeO2 catalysts from Ce-BTC precursor and their catalytic performance for CO oxidation

Science.gov (United States)

Zhang, Xiaodong; Hou, Fulin; Yang, Yang; Wang, Yuxin; Liu, Ning; Chen, Dan; Yang, Yiqiong

2017-11-01

The paper presents a novel and facile method for preparing cauliflowerlike CeO2 through direct decomposition of cerium based metal-organic framework (MOF) Ce-BTC (BTC = 1,3,5-benzenetricarboxylic acid) straw in air. Several analytical tools such as Scanning electron microscopy (SEM), X-ray diffraction (XRD), Thermogravimetric (TG), N2 adsorption-desorption, Temperature programmed reduction (TPR), Raman, X-ray photoelectron spectroscopic (XPS) and Photoluminescence (PL) have been used to characterize Ce-BTC and CeO2. The Ce-BTC calcined at 500 °C (CeO2-500) maintains the morphology of its template ;Ce-BTC; and forms a special cauliflower-like structure. XRD patterns showed that the catalyst has a perfect CeO2 crystal structure and has a smaller particle size. The prepared CeO2 cauliflowers exhibit excellent catalytic activities, long-term stability, and cycling stability for CO oxidation. The improved catalytic activities could be attributed to porous nanorods of CeO2 cauliflowers, which provide more active sites and oxygen vacancy for CO oxidation.

Cerocene Revisited: The Electronic Structure of and Interconversion Between Ce2(C8H8)3 and Ce(C8H8)2

Energy Technology Data Exchange (ETDEWEB)

Walter, Marc D.; Booth, Corwin H.; Lukens, Wayne W.; Andersen, Richard A.

2009-02-02

New synthetic procedures for the preparation of Ce(cot)2, cerocene, from [Li(thf)4][Ce(cot)2], and Ce2(cot)3 in high yield and purity are reported. Heating solid Ce(cot)2 yields Ce2(cot)3 and COT while heating Ce2(cot)3 with an excess of COT in C6D6 to 65oC over four months yields Ce(cot)2. The solid state magnetic susceptibility of these three organocerium compounds shows that Ce(cot)2 behaves as a TIP (temperature independent paramagnet) over the temperature range of 5-300 K, while that of Ce2(cot)3 shows that the spin carriers are antiferromagnetically coupled below 10 K; above 10 K, the individual spins are uncorrelated, and [Ce(cot)2]- behaves as an isolated f1 paramagnet. The EPR at 1.5K for Ce2(cot)3 and [Ce(cot)2]- have ground state of MJ= +- 1/2. The LIII edge XANES of Ce(cot)2 (Booth, C.H.; Walter, M.D.; Daniel, M.; Lukens, W.W., Andersen, R.A., Phys. Rev. Lett. 2005, 95, 267202) and 2Ce2(cot)3 over 30-500 K are reported; the Ce(cot)2 XANES spectra show Ce(III) and Ce(IV) signatures up to a temperature of approximately 500 K, whereupon the Ce(IV) signature disappears, consistent with the thermal behavior observed in the melting experiment. The EXAFS of Ce(cot)2 and Ce2(cot)3 are reported at 30 K; the agreement between the molecular parameters for Ce(cot)2 derived from EXAFS and single crystal X-ray diffraction data are excellent. In the case of Ce2(cot)3 no X-ray diffraction data are known to exist, but the EXAFS are consistent with a"triple-decker" sandwich structure. A molecular rationalization is presented for the electronic structure of cerocene having a multiconfiguration ground state that is an admixture of the two configurations Ce(III, 4f1)(cot1.5-)2 and Ce(IV, 4f0)(cot2-)2; the multiconfigurational ground state has profound effects on the magnetic properties and on the nature of the chemical bond in cerocene and, perhaps, other molecules.

Glass forming ability of the Al-Ce-Ni system; Avaliacao da capacidade de formacao vitrea do sistema Al-Ce-Ni

Energy Technology Data Exchange (ETDEWEB)

Triveno Rios, C. [Engenharia Mecanica, Universidade Federal de Mato Grosso, Rondonopolis, MT (Brazil)], e-mail: triveno@ufmt.br; Surinach, S.; Baro, M.D. [Departamento de Engenharia de Materiais - Universidade Federal de Sao Carlos, SP (Brazil); Bolfarini, C.; Botta, W.J.; Kiminami, C.S. [Departamento de Fisica da Universidade Autonoma de Barcelona, Bellaterra (Spain)

2010-07-01

In the present work, the glass forming ability (GFA) and its compositional dependence on Al-Ni-Ce system alloys were investigated in function of several thermal parameters. Rapidly quenched Al{sub 85}Ni{sub 15}-{sub X}Ce{sub X} (X=4,5,6,7,10), Al{sub 90}Ni{sub 5}Ce{sub 5}, Al{sub 89}Ni{sub 2}.{sub 4}Ce{sub 8}.{sub 6}, Al{sub 80}Ni{sub 15.6}Ce{sub 4}.{sub 4} and Al{sub 78}Ni{sub 18.5}Ce{sub 3.5} amorphous ribbons were produced by melt-spinning and the structural transformation during heating was studied using a combination of X-ray diffraction (XRD) and differential scanning calorimetry (DSC). The results showed that the GFA and the thermal stability in the Al-rich corner of Al- Ni-Ce system alloys were enhanced by increasing the solute content and specifically the Ce content (author)

Mechanical properties of non-centrosymmetric CePt3Si and CePt3B

Science.gov (United States)

Rogl, G.; Legut, D.; Sýkora, R.; Müller, P.; Müller, H.; Bauer, E.; Puchegger, S.; Zehetbauer, M.; Rogl, P.

2017-05-01

Elastic moduli, hardness (both at room temperature) and thermal expansion (4.2-670 K) have been experimentally determined for polycrystalline CePt3Si and its prototype compound CePt3B as well as for single-crystalline CePt3Si. Resonant ultrasound spectroscopy was used to determine elastic properties (Young’s modulus E and Poisson’s ratio ν) via the eigenfrequencies of the sample and the knowledge of sample mass and dimensions. Bulk and shear moduli were calculated from E and ν, and the respective Debye temperatures were derived. In addition, ab initio DFT calculations were carried out for both compounds. A comparison of parameters evaluated from DFT with those of experiments revealed, in general, satisfactory agreement. Positive and negative thermal expansion values obtained from CePt3Si single crystal data are fairly well explained in terms of the crystalline electric field model, using CEF parameters derived recently from inelastic neutron scattering. DFT calculations, in addition, demonstrate that the atomic vibrations keep almost unaffected by the antisymmetric spin-orbit coupling present in systems with crystal structures having no inversion symmetry. This is opposite to electronic properties, where the antisymmetric spin-orbit interaction has shown to distinctly influence features like the superconducting condensate of CePt3Si.

Crystal growth and scintillation properties of multi-component oxide single crystals: Ce:GGAG and Ce:La-GPS

Energy Technology Data Exchange (ETDEWEB)

Yoshikawa, A., E-mail: yoshikawa@imr.tohoku.ac.jp [Institute for Materials Research (IMR), Tohoku University, Sendai 980-8577 (Japan); New Industry Creation Hatchery Center (NICHe), Tohoku University, Sendai 980-8579 (Japan); C& A Corporation, 6-6-40 Aramaki Aza Aoba, Aoba-ku, Sendai 980-8579 (Japan); Kamada, K. [New Industry Creation Hatchery Center (NICHe), Tohoku University, Sendai 980-8579 (Japan); C& A Corporation, 6-6-40 Aramaki Aza Aoba, Aoba-ku, Sendai 980-8579 (Japan); Kurosawa, S. [Institute for Materials Research (IMR), Tohoku University, Sendai 980-8577 (Japan); New Industry Creation Hatchery Center (NICHe), Tohoku University, Sendai 980-8579 (Japan); Shoji, Y. [Institute for Materials Research (IMR), Tohoku University, Sendai 980-8577 (Japan); C& A Corporation, 6-6-40 Aramaki Aza Aoba, Aoba-ku, Sendai 980-8579 (Japan); Yokota, Y. [New Industry Creation Hatchery Center (NICHe), Tohoku University, Sendai 980-8579 (Japan); Chani, V.I. [Institute for Materials Research (IMR), Tohoku University, Sendai 980-8577 (Japan); Nikl, M. [Institute of Physics, AS CR, Cukrovarnická 10, 162 53 Prague (Czech Republic)

2016-01-15

Crystal growth by micro-pulling-down, Czochralski, and floating zone methods and scintillation properties of Ce:Gd{sub 3}(Ga,Al){sub 5}O{sub 12} (Ce:GGAG) multi-component oxide garnets, and Ce:Gd{sub 2}Si{sub 2}O{sub 7} (Ce:GPS) or Ce:(La,Gd){sub 2}Si{sub 2}O{sub 7} (Ce:La-GPS) pyro-silicates are reviewed. GGAG crystals demonstrated practically linear dependences of some of the parameters including lattice constant, emission wavelength, and band gap on Ga content. However, emission intensity, light yield and energy resolution showed maxima for intermediate compositions. GGAG crystals had the highest light yield of 56,000 photon/MeV for Ga content of 2.7 atoms per garnet formula unit. Similarly the light yield and energy resolution of La-GPS showed the highest values of 40,000 photon/MeV and 4.4%@662 keV, respectively, for La-GPS containing 10% of La. Moreover, La-GPS demonstrated stable scintillation performance up to 200 °C.

Experimental and theoretical study about sulfur deactivation of Ni/ CeO{sub 2} and Rh/CeO{sub 2} catalysts

Energy Technology Data Exchange (ETDEWEB)

Ocsachoque, Marco A., E-mail: ocmarco@quimica.unlp.edu.ar [Centro de Investigación y Desarrollo en Ciencias Aplicadas “Dr Jorge J. Ronco”, (CONICET, CCT La Plata), Departamento de Química, Facultad de Cs Exactas (UNLP), Calle 48 N° 257, 1900 La Plata (Argentina); Eugenio Russman, Juan I.; Irigoyen, Beatriz [Instituto de Tecnologías del Hidrógeno y Energías Sostenibles (ITHES), Departamento de Ingeniería Química, Facultad de Ingeniería (UBA), Buenos Aires (Argentina); Gazzoli, Delia [Dipartimento di Chimia, Universitá di Roma “La Sapienza”, Roma (Italy); González, María G. [Centro de Investigación y Desarrollo en Ciencias Aplicadas “Dr Jorge J. Ronco”, (CONICET, CCT La Plata), Departamento de Química, Facultad de Cs Exactas (UNLP), Calle 48 N° 257, 1900 La Plata (Argentina)

2016-04-01

Sulfur deactivation of Ni/CeO{sub 2} and Rh/CeO{sub 2} catalysts were examined through an experimental and theoretical study. These catalysts were characterized by N{sub 2} adsorption, X-ray diffraction, temperature programmed reaction, thermogravimetric analysis, Uv–visible spectroscopy and Raman spectroscopy, and tested under the methane dry reforming reaction in the presence of H{sub 2}S. On the other hand, different possible interactions of sulfur with Rh, Ni or surface sites of the CeO{sub 2} support were evaluated by performing energy calculations with the density functional theory (DFT). Overall, the results indicate that tolerance to sulfur of Rh/CeO{sub 2} catalyst is higher than that of Ni/CeO{sub 2} one. In this sense, TPR measurements show that reduction of CeO{sub 2} is promoted by the presence of Rh. This effect, probably caused by hydrogen spillover to CeO{sub 2} support during the reduction of RhO{sub x} species, could be linked to a high oxygen donation capacity of Rh/CeO{sub 2} catalysts. Accordingly, the O{sup 2−} species existing on Rh/CeO{sub 2} catalysts, revealed by Raman spectra of these samples, could favor sulfur oxidation and prevent Rh–S interactions. Likewise, the theoretical calculations show that desorption of S–O species from Rh/CeO{sub 2} system is more favorable than that from Ni/CeO{sub 2} one. Therefore, our experimental and theoretical study about sulfur deactivation of Ni and Rh supported on CeO{sub 2} allow us to postulate that Rh can help to desorb SO{sub x} species formed on the support, retarding sulfur poisoning of the Rh/CeO{sub 2} catalysts. - Highlights: • CeO{sub 2} support can act as a sacrifice trap decreasing sulfur poisoning. • Theoretical calculations indicate an important nickel affinity with sulfur. • Rh would favor desorption of S–O species formed on the support. • The O{sup 2−} species present on the Rh–CeO{sub 2} sample favor sulfur removal.

Aspergillus fumigatus in ovine lung in Brazil - Case report

Directory of Open Access Journals (Sweden)

Huber Rizzo

2016-12-01

Full Text Available ABSTRACT. Rizzo H., Silva Júnior V., Mota R.A., Rocha L.L.L., Ono M.S.B., Cruz J.A.L. de O., de Torres S.M., Coutinho L.C. de A., Guimarães J.A. & Dantas A.C. [Aspergillus fumigatus in ovine lung in Brazil - Case report.] Aspergillus fumigatus em pulmão de ovino no Brasil - Relato de caso. Revista Brasileira de Medicina Veterinária, 38(4:413-419, 2016. Departamento de Medicina Veterinária, Universidade Federal Rural de Pernambuco, Rua Dom Manoel de Medeiros s/n, Recife, PE 52171-900, Brasil. E-mail: hubervet@gmail.com Its described a case of mycotic pneumonia caused by Aspergillus fumigatus in a three months old sheep, that died during the treatment period at the AGA/DMV/UFRPE consequence of skin lesions caused by dog attack. The animal did not respond to antibiotic treatment base on florafenicol, keeping high leukometric values. Macroscopically the lungs showed multifocal areas of cheesy aspect, varing shape and sizes, with yellowish tinge to the center and red at the edges. Microscopically were found granulomatous lesion with extensive dystrophic calcification area, presence of fibrin exudate in the bronchi, inflammatory infiltration of mononuclear diffuse, fibroblast proliferation delimiting a capsule around the inflammatory foci, epiteliodida robe with negative images of hyphae in the lung parenchyma, foamy macrophages, but no giant cells were seen. The blood culture on agar revealed the development of filamentous fungus with grayish color and lots of aerial hyphae, and the culture on Sabouraud media were seen colonies of dark green color with whitish borders both compatible with macromorphology colonies of A. fumigatus . The micromorphology of fungal growth revealed vesicles stick format with sporulation begins in the upper half of the vesicles. The imprints of nodular lesions of the lungs on slides, through panotic dye, showed septate hyphae and branched invading the tissue. Pulmonary infection by A. fumigatus, showed fatal and

Transitions between localized and itinerant antiferromagnetism in the Ce(Pb,In) sub 3 and Ce(Pb,Tl) sub 3 systems

Energy Technology Data Exchange (ETDEWEB)

Rahman, S; Timlin, J; Crow, J E; Mihalisin, T; Schlottmann, P [Temple Univ., Philadelphia, PA (United States)

1990-01-01

CePb{sub 3} is an itinerant heavy fermion antiferromagnetic displaying an incommensurate magnetic structure and an extremely small ordered moment. CeIn{sub 3} and CeTl{sub 3}, on the other hand are well-localized, simple antiferromagnets with the full moments expected for crystal field doublet Ce{sup 3+} ion systems. The authors have performed specific heat, sysceptibility and resistivity measurements for both the Ce(Pb,In){sub 3} and Ce(Pb,Tl){sub 3} systems. These systems remain cubic Cu{sub 3}Au structures across the entire series. They display extremely interesting T{sub N} behavior which suggests that a continuous transition from itinerant to localized antiferromagnetic behavior occurs for the Ce(Pb,Tl){sub 3} system. In the Ce (Pb,In){sub 3} system both types of antiferromagnetism are present but they are separated by a concentration range ({approximately}10-40% Pb) over which antiferromagnetism does not exist. The behavior of these systems cannot be accounted for by a Kondo necklace approach that neglects the coherence of a heavy fermion lattice and resulting itinerant antiferromagnetism.

Superconductivity and anomalous normal state in the CePd2Si2/CeNi2Ge2 system

International Nuclear Information System (INIS)

Grosche, F.M.; Lister, S.J.S.; Carter, F.V.; Saxena, S.S.; Haselwimmer, R.K.W.; Mathur, N.D.; Julian, S.R.; Lonzarich, G.G.

1997-01-01

The unconventional nonmagnetic metal CeNi 2 Ge 2 is characterised at ambient pressure by temperature dependences of the specific heat and of the resistivity which deviate strongly from standard Fermi-liquid predictions and are reminiscent of the behaviour observed in its sibling system CePd 2 Si 2 above the critical pressure at which magnetic order is suppressed. We have explored the CePd 2 Si 2 /CeNi 2 Ge 2 phase diagram in a series of resistivity measurements under high hydrostatic pressure, p. At p>15 kbar, a new superconducting transition appears below 220 mK in CeNi 2 Ge 2 and shifts to higher temperatures with increasing pressure, reaching ∝400 mK at p∝26 kbar. (orig.)

Redox potentials and kinetics of the Ce 3+/Ce 4+ redox reaction and solubility of cerium sulfates in sulfuric acid solutions

Science.gov (United States)

Paulenova, A.; Creager, S. E.; Navratil, J. D.; Wei, Y.

Experimental work was performed with the aim of evaluating the Ce 4+/Ce 3+ redox couple in sulfuric acid electrolyte for use in redox flow battery (RFB) technology. The solubility of cerium sulfates in 0.1-4.0 M sulfuric acid at 20-60 °C was studied. A synergistic effect of both sulfuric acid concentration and temperature on the solubility of cerous sulfate was observed. The solubility of cerous sulfate significantly decreased with rising concentration of sulfuric acid and rising temperature, while the solubility of ceric sulfate goes through a significant maximum at 40 °C. Redox potentials and the kinetics of the cerous/ceric redox reaction were also studied under the same temperature-concentration conditions. The redox potentials were measured using the combined redox electrode (Pt-Ag/AgCl) in equimolar Ce 4+/Ce 3+ solutions (i.e.[Ce 3+]=[Ce 4+]) in sulfuric acid electrolyte. The Ce 3+/Ce 4+ redox potentials significantly decrease (i.e. shift to more negative values) with rising sulfuric acid concentration; a small maximum is observed at 40 °C. Cyclic voltammetric experiments confirmed slow electrochemical kinetics of the Ce 3+/Ce 4+ redox reaction on carbon glassy electrodes (CGEs) in sulfuric acid solutions. The observed dependencies of solubilities, the redox potentials and the kinetics of Ce 3+/Ce 4+ redox reaction on sulfuric acid concentration are thought to be the result of inequivalent complexation of the two redox species by sulfate anions: the ceric ion is much more strongly bound to sulfate than is the cerous ion. The best temperature-concentration conditions for the RFB electrolytes appear to be 40 °C and 1 M sulfuric acid, where the relatively good solubility of both cerium species, the maximum of redox potentials, and the more or less satisfying stability of CGE s were found. Even so, the relatively low solubility of cerium salts in sulfuric acid media and slow redox kinetics of the Ce 3+/Ce 4+ redox reaction at carbon indicate that the Ce 3+/Ce

Ce-doped nanoparticles of TiO2: Rutile-to-brookite phase transition and evolution of Ce local-structure studied with XRD and XANES

International Nuclear Information System (INIS)

Kityakarn, Sutasinee; Worayingyong, Attera; Suramitr, Anwaraporn; Smith, M.F.

2013-01-01

The crystal and electronic structural changes undergone by TiO 2 nanoparticles when Ce is introduced were studied using X-ray diffraction (XRD) and X-ray absorption near-edge spectroscopy (XANES). A small amount of Ce (less than 1% molar concentration) resulted in i/a significant reduction of the average size of the TiO 2 nanoparticles and ii/a phase transition in which brookite replaced rutile as the minority phase component (anatase was the majority phase component at all Ce concentrations studied up to 10% molar concentration). The Ce L3 edge XANES revealed changes in the local environment of Ce impurities. As Ce concentration was increased the fraction of Ce that have formal valence of +3 decreased and, for the remaining Ce with valence +4, the 4f orbitals became less-strongly hybridized with the p-orbitals of oxygen neighbors. The results have implications for photocatalytic and gas sensing properties of Ce-doped TiO 2 . - Highlights: ► Ce-doping: TiO 2 nanoparticles shrink and minority phase changes rutile-> brookite. ► XANES reveals phase change for arbitrarily small particles (while XRD fails). ► As Ce added: fraction of Ce +3 dopants falls, hybridization of Ce +4 with O weakens

Aspectos Tafonômicos de Testudines da Formação Santana (Cretáceo Inferior,Bacia do Araripe, Nordeste do Brasil.

Directory of Open Access Journals (Sweden)

Gustavo Ribeiro de Oliveira

2007-07-01

Full Text Available Araripe Basin is worldwide famous by diverse and exquisitely well preserved fossil assemblages in antana Formation. This lithostratigraphic unit is subdivided into three members: Crato, Ipubi and Romualdo. Up to date six species of turtles are known: Araripemys barretoi Price, 1973; Santanachelys gaffneyi, Hirayama,1998; Brasilemys josai Lapparent de Broin, 2000; Cearachelys placidoi Gaffney, Campos & Hirayama, 2001, Euraxemys essweini Gaffney, Tong & Meylan, 2006 and Caririemys violetae Oliveira & Kellner, 2007.Taphonomical features of turtles from Crato and Romualdo members are presents here. One specimen was examined in the Crato lagerstätte, (MN 4893-V Araripemys sp. (partial skull, axial and apendicular skeleton. This exemplar is preserved in light-beige colored laminated limestone from the Crato Member. Three specimenswere analized (MN 6743-V, MN 6744-V and MN 6760-V in the Romualdo lagerstätte, the two first are Araripemys barretoi specimens (shell and cervical vertebrae and the later is a Cearachelys placidoi specimen (fragmented shell. They are preserved in calcareous nodules. No data of collection of these specimens areavailable, however are possible to infer on aspects of preservation of these exemplares, since that these are preserved in the original sedimentary matrix. All specimens have shown the surface of bones without abrasion, what it allows to infer these turtles as autocthonous.

Synthesis and characterization of Ce doped MFI zeolite

International Nuclear Information System (INIS)

Kalita, Banani; Talukdar, Anup K.

2012-01-01

Highlights: ► Cerium was incorporated into the tetrahedral position of MFI zeolite structure. ► Unit cell volume increases with an increase of Ce content in the framework of MFI. ► A band at 310 nm in the UV–vis spectra indicates Ce incorporation in MFI structure. ► The mass loss (%) in the region 373–423 K decreases with increase of Ce in MFI. - Abstract: Ce doped MFI (mobil five) zeolites with different Si to (Ce + Al) and different Ce to Al ratios were synthesized by a hydrothermal synthesis method. All the samples were characterized by different techniques such as X-ray diffraction, Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), UV–vis diffuse reflectance spectroscopy (DRS) and scanning electron microscopy (SEM). The results showed that almost pure MFI phase was obtained in all cases with incorporation of cerium metal into the framework. The increase in unit cell parameters observed with an increase in Ce content is indicative of incorporation of Ce into the framework structure of microporous material MFI. Corroboration of the framework incorporation of Ce into the MFI zeolite structure was also obtained from the UV–vis DRS spectra by the presence of an absorption band at 280 nm. TGA and SEM of the samples provide complementary evidence for Ce incorporation into the framework MFI structure.

Catalytic reforming of toluene as tar model compound: effect of Ce and Ce-Mg promoter using Ni/olivine catalyst.

Science.gov (United States)

Zhang, Ruiqin; Wang, Huajian; Hou, Xiaoxue

2014-02-01

Tar produced by biomass gasification as a route of renewable energy must be removed before the gas can be used. This study was undertaken using toluene as a model tar compound for evaluating its steam reforming conversion with three Ni-based catalysts, Ni/olivine, Ni-Ce/olivine and Ni-Ce-Mg/olivine. Effects of Ce and Mg promoters on the reaction activity and coke deposition were studied. Overall the performance of Ce and Mg promoted Ni/olivine catalysts is better than that of only Ce promoter and Ni/olivine alone. The experimental results indicate that Ni-Ce-Mg/olivine catalysts could improve the resistance to carbon deposition, enhance energy gases yield and resist 10ppm H2S poison at 100mLmin(-1) for up to 400min. Furthermore, the activity of catalysts was related to the steam/carbon (S/C) ratios; at S/C ratio=5, T=790°C, space velocity=782h(-1) and t=2h, the Ni-Ce-Mg/olivine system yielded 89% toluene conversion, 5.6Lh(-1) product gas rate, 62.6mol% H2 content and 10% (mol useful gas mol(-1) toluene) energy yield. Moreover, at low S/C ratio, it had higher reaction activity and better ability to prevent coking. There is a small amount of carbon deposition in the form of amorphous carbon after 7h. Various characterization techniques such as XRD, FTIR and thermogravimetric were performed to investigate the coke deposition of Ni/olivine, Ni-Ce/olivine and Ni-Ce-Mg/olivine. It is suggested that 3% Ni-1% Ce-1% Mg/olivine was the most promising catalyst due to its minimum coke amount and the lower activation energy of coke burning. Copyright © 2014. Published by Elsevier Ltd.

Oxidation of Ce(III) in Foam Decontaminant by Ozone

Energy Technology Data Exchange (ETDEWEB)

Jung, Chong Hun; Yoon, I. H.; Choi, W. K.; Moon, J. K.; Yang, H. B. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Lee, J. S. [Gachon University, Seongnam (Korea, Republic of)

2016-10-15

A nanoparticle-based foam decontaminant is composed of a surfactant and nanoparticles for the generation and maintenance of foam, and a chemical decontamination agent made of Ce(IV) dissolved in nitric acid. Ce(IV) will be reduced to Ce(III) through the decontamination process. Oxidizing cerium(III) can be reused as a decontamination agent, Ce(IV). Oxidation treatment technology by ozone uses its strong oxidizing power. It can be regarded as an environmentally friendly process, because ozone cannot be stored and transported like other industrial gases (because it quickly decays into diatomic oxygen) and must therefore be produced on site, and used ozone can decompose immediately. The ozonation treatment of Ce(III) in foam decontaminant containing a surfactant is necessary for the effective regeneration of Ce(III). Thus, the present study was undertaken to determine the optimal conditions for ozonation treatment in the regeneration of Ce(III) into Ce(IV) in the nanoparticle-based foam decontaminant containing surfactant. This study was undertaken to determine the optimal conditions for ozonation treatment in the regeneration of Ce(III) to Ce(IV) in nanoparticle-based foam decontaminant containing a TBS surfactant. The oxidation conversion rate of Ce(III) was increased with an increase in the flow rate of the gas mixture and ozone injection amount. The oxidation time required for the 100% oxidation conversion of Ce(III) to Ce(IV) at a specific ozone injection amount can be predicted from these experimental data.

Oxidation of Ce(III) in Foam Decontaminant by Ozone

International Nuclear Information System (INIS)

Jung, Chong Hun; Yoon, I. H.; Choi, W. K.; Moon, J. K.; Yang, H. B.; Lee, J. S.

2016-01-01

A nanoparticle-based foam decontaminant is composed of a surfactant and nanoparticles for the generation and maintenance of foam, and a chemical decontamination agent made of Ce(IV) dissolved in nitric acid. Ce(IV) will be reduced to Ce(III) through the decontamination process. Oxidizing cerium(III) can be reused as a decontamination agent, Ce(IV). Oxidation treatment technology by ozone uses its strong oxidizing power. It can be regarded as an environmentally friendly process, because ozone cannot be stored and transported like other industrial gases (because it quickly decays into diatomic oxygen) and must therefore be produced on site, and used ozone can decompose immediately. The ozonation treatment of Ce(III) in foam decontaminant containing a surfactant is necessary for the effective regeneration of Ce(III). Thus, the present study was undertaken to determine the optimal conditions for ozonation treatment in the regeneration of Ce(III) into Ce(IV) in the nanoparticle-based foam decontaminant containing surfactant. This study was undertaken to determine the optimal conditions for ozonation treatment in the regeneration of Ce(III) to Ce(IV) in nanoparticle-based foam decontaminant containing a TBS surfactant. The oxidation conversion rate of Ce(III) was increased with an increase in the flow rate of the gas mixture and ozone injection amount. The oxidation time required for the 100% oxidation conversion of Ce(III) to Ce(IV) at a specific ozone injection amount can be predicted from these experimental data

Tetragonal zirconia ceramics in Zr O2-Ce O2 system (Ce-TZP): preparation, characterization and mechanical properties

International Nuclear Information System (INIS)

Andrade Nono, M.C. de.

1992-01-01

This paper describes and discusses the results achieved in a study about Ce-TZP ceramics prepared from conventional powder mixtures of Zr O 2 and Ce O 2 (with composition in the range of 8 to 16 mol% Ce O 2 ). Physical and chemical characteristics were related with the powder compaction behavior and with the sintering state. The sintered ceramics showed a level of high porosity (≅ 4%), mainly due to the fairly adequate powder characteristics and compaction. The crystalline phases were analysed from X-rays diffraction data and showed that these ceramics can present tetragonal-to-monoclinic stress induced transformation. The bending strength, fracture toughness and Vickers hardness results were influenced by Ce O 2 content microstructure and sintering temperature. These Ce-TZP ceramics showed mechanical strength results comparable to those published in the international literature. (author)

Chemically abrupt interface between Ce oxide and Fe films

International Nuclear Information System (INIS)

Lee, H.G.; Lee, D.; Kim, S.; Kim, S.G.; Hwang, Chanyong

2005-01-01

A chemically abrupt Fe/Ce oxide interface can be formed by initial oxidation of an Fe film followed by deposition of Ce metal. Once a Ce oxide layer is formed on top of Fe, it acts a passivation barrier for oxygen diffusion. Further deposition of Ce metal followed by its oxidation preserve the abrupt interface between Ce oxide and Fe films. The Fe and Ce oxidation states have been monitored at each stage using X-ray photoelectron spectroscopy

Redox behavior of Ce(IV)/Ce(III) in the presence of nitrilotriacetic acid: a surrogate study for An(IV)/An(III) redox behavior

International Nuclear Information System (INIS)

Suzuki, Y.; Nankawa, T.; Ohnuki, T.; Francis, A.J.

2010-01-01

Using cyclic voltammetry, we investigated the redox behavior of Ce(IV)/Ce(III), which is a surrogate for An(IV)/An(III) (An = actinides), in a solution of nitrilotriacetic acid (NTA) at 25 C. The cyclic voltammogram of Ce in a 0.1 M NTA solution at pH 6 showed a reversible one-electron redox reaction for Ce(IV)/Ce(III) at 0.51 V vs. Ag/AgCl. This redox potential was much lower than that obtained in 1 M nitric acid, indicating that Ce(IV) was preferentially stabilized by complexation with NTA. The redox potential in the NTA solution was independent of the Ce concentration from 2 to 20 mM, NTA concentration from 5 to 200 mM and pH between 3 and 7. These results indicated that no polymerization and no additional coordination of NTA and OH to the Ce(III)-NTA complex took place during the redox reaction. As the speciation calculation of Ce(III) in the NTA solution showed that the predominant species was Ce III (nta) 2 3 (H 3 nta = NTA), the redox reaction of the Ce-NTA complex was expressed by the following: Ce IV (nta) 2 2- + e - ↔ Ce III (nta) 2 3 . The logarithm of the stability constant of Ce IV (nta) 2 2- was calculated to be 38.6 ± 0.8 for I = 0 from the redox potential shift of Ce(IV)/Ce(III) in the NTA solution. The value was in good accordance with the stability constant of the Np IV (nta) 2 2- complex, demonstrating that the aqueous coordination chemistry of Ce(IV) with NTA is quite similar to that of An(IV). These results strongly suggest that a negative shift of the Pu(IV)/Pu(III) redox potential in the NTA solution should make Pu(IV) more stable than Pu(III) even in a reducing environment. (orig.)

Synthesis of CeS and interactions with molten metals

International Nuclear Information System (INIS)

Krikorian, O.H.; Curtis, P.G.

1988-01-01

Hot-pressed and sintered discs of single-phase CeS were tested for interaction with molten aluminium, uranium, and iron to determine the conditions under which reaction first begins and the nature of the reaction. Aluminium begins to react with CeS at ∼ 1190 K, slowly dissolving cerium and forming a thin layer of Ce 3 S 4 at the reaction interface. At 1363 K, aluminium wets and spreads over the CeS surface and dissolves ∼ 01 at% Ce. Ce 3 Al 11 precipitates out in the aluminium phase on cooldown. Uranium does not react with CeS at 1673 K, but at 1873 K it wets and spreads on CeS and dissolves ∼ 100 atom ppm S, which precipitates out as US on cooldown. Iron wets CeS at 1873 K and 1973 K but does not spread or interact. Because of the desirable containment characteristics of CeS and similar sulfides for molten metals, we recommend their use in a number of applications. (author)

(EC+β+) decay of 130Ce

International Nuclear Information System (INIS)

Xu Shuwei; Zhang Tianmei; Xie Yuanxiang; Ma Ruichang; Ge Yuanxiu; Guo Yingxiang; Wang Chunfang; Li Zhankui; Guo Bing; Xing Jianping; Guo Tianrui; Zhu Shaofei; Xu Wang; Du Jinzhou

1996-01-01

The nuclide 130 Ce was produced by a ( 16 O, 4n) reaction on an enriched 118 Sn target. Reaction products were transported to a shielded location by using a helium-jet tape transport system. A 22.9 min activity in chemically separated cerium sample was identified as 130 Ce. The (EC+β + ) decay scheme of 130 Ce was proposed for the first time. This scheme includes 108 γ-lines, 107 γ-lines among them being new. More than 13 1 + low-lying states of 130 La are populated in the decay of 130 Ce. Two new isomers with half-life of 77±10 ns and 17±5 ns were observed by means of delayed γ-γ coincidence measurements. (orig.). With 5 figs., 3 tabs

Mycobacterium leprae in six-banded (Euphractus sexcinctus) and nine-banded armadillos (Dasypus novemcinctus) in Northeast Brazil.

Science.gov (United States)

Frota, Cristiane Cunha; Lima, Luana Nepomuceno Costa; Rocha, Adalgiza da Silva; Suffys, Philip Noel; Rolim, Benedito Neilson; Rodrigues, Laura Cunha; Barreto, Maurício Lima; Kendall, Carl; Kerr, Ligia Regina Sansigolo

2012-12-01

Human beings are the main reservoir of the causative agent of leprosy, Mycobacterium leprae. In the Americas, nine-banded armadillos (Dasypus novemcinctus) also act as a reservoir for the bacillus. In the state of Ceará (CE), which is located in Northeast Brazil and is an endemic area of leprosy, there are several species of armadillos, including D. novemcinctus and Euphractus sexcinctus (six-banded armadillo). Contact between humans and armadillos occur mainly through hunting, cleaning, preparing, cooking and eating. This study identified M. leprae DNA in the two main species of armadillos found in Northeast Brazil. A total of 29 wild armadillos (27 D. novemcinctus and 2 E. sexcinctus) were captured in different environments of CE countryside. Samples from the ear, nose, liver and spleen from each of these animals were tested by a nested M. leprae-specific repetitive element polymerase chain reaction assay. The samples that tested positive were confirmed by DNA sequencing. M. leprae was detected in 21% (6/29) of the animals, including five D. novemcinctus and one E. sexcinctus. This is the first Brazilian study to identify the presence of a biomarker of M. leprae in wild armadillos (D. novemcinctus and E. sexcinctus) in a leprosy hyperendemic area where there is continuous contact between humans and armadillos.

Mycobacterium leprae in six-banded (Euphractus sexcinctus and nine-banded armadillos (Dasypus novemcinctus in Northeast Brazil

Directory of Open Access Journals (Sweden)

Cristiane Cunha Frota

2012-12-01

Full Text Available Human beings are the main reservoir of the causative agent of leprosy, Mycobacterium leprae. In the Americas, nine-banded armadillos (Dasypus novemcinctus also act as a reservoir for the bacillus. In the state of Ceará (CE, which is located in Northeast Brazil and is an endemic area of leprosy, there are several species of armadillos, including D. novemcinctus and Euphractus sexcinctus (six-banded armadillo. Contact between humans and armadillos occur mainly through hunting, cleaning, preparing, cooking and eating. This study identified M. leprae DNA in the two main species of armadillos found in Northeast Brazil. A total of 29 wild armadillos (27 D. novemcinctus and 2 E. sexcinctus were captured in different environments of CE countryside. Samples from the ear, nose, liver and spleen from each of these animals were tested by a nested M. leprae-specific repetitive element polymerase chain reaction assay. The samples that tested positive were confirmed by DNA sequencing. M. leprae was detected in 21% (6/29 of the animals, including five D. novemcinctus and one E. sexcinctus. This is the first Brazilian study to identify the presence of a biomarker of M. leprae in wild armadillos (D. novemcinctus and E. sexcinctus in a leprosy hyperendemic area where there is continuous contact between humans and armadillos.

Proximity effect of Pb on CeCu6 and La0.05Ce0.95Cu6

International Nuclear Information System (INIS)

Chen, T.P.; Tipparachi, U.; Yang, H.D.; Wang, J.T.; Chen, B.; Chen, J.C.J.

1999-01-01

Heavy fermion materials have attracted a great deal of attention since 1979. These materials which contain a rare earth (U, or Ce, etc.) element exhibit unusual behavior at low temperature. The effective mass m* of the Landau quasiparticles is found to be orders of magnitude higher than that of a bare electron. Some of the Heavy Fermion materials become superconductors at low temperature. The pairing of electrons in these superconductors may not be of s symmetry like those in BCS type superconductors. The mismatch in electronic mass and the difference in pairing state between the light conventional superconducting electrons and the heavy fermion electrons have brought the coupling between light electrons (BCS type) and the heavy fermion electrons into question. Proximity effect of Pb on CeCu 6 , Pb on La 0.05 Ce 0.95 Cu 6 , and Pb on Cu was used to investigate the coupling between the conventional superconducting electrons of Pb and the heavy electrons in CeCu 6 or La 0.05 Ce 0.95 Cu 6 . In this experiment proximity effect was found between Pb and CeCu 6 , as well as between Pb and La 0.05 Ce 0.95 Cu 6 . However, the proximity effect is small when compared with that between Pb and Cu. This indicates a much shorter extrapolation length in the heavy fermion materials than in Cu. Such a phenomenon can be explained by the mismatch in effective mass between the superconducting Pb electrons and the heavy fermion electrons

CE Challenges : Work to Do

NARCIS (Netherlands)

Stjepandic, J; Verhagen, W.J.C.; Wognum, P.M.

2015-01-01

CE has been used for more than two decades now. Despite many successes and advantages, there are still many challenges to be addressed. These challenges are both technical and organisational. In the paper we will address the current challenges of CE. Many challenges

Scolopendromorpha associados a termitários de Constrictotermes cyphergaster Silvestri (Isoptera: Termitidae na Chapada do Araripe, Ceará, Brasil

Directory of Open Access Journals (Sweden)

Raul Azevedo

2018-04-01

Abstract. Abandoned termites allow predators species like spiders and scolopendromorphs use it for forage or refuge. This note reports an occurrence of five Scolopendromorpha species associated indoor and outdoor of sixty abandoned Constrictortermes cyphergaster Silvestri nests on rainy and dry season of 2016. The nest were collected indoor Parque Estadual Sítio Fundão, Crato, Ceará, Araripe Plateau, Northeast Brazil. Exemplars of four Scolopendromorpha species were collected associated to 12 nests of C. cyphergaster: Newportia balzanii (Silvestri, Newportia maxima Bücherl, Cryptops sp., e Schendylidae. Around the nests, it was collected Scolopocrytops piauhyensi (Chamberlinand Cryptops sp. by pitfall trap along the rainy and dry season of 2016. The species collected increase their geographical distribution and places they can be found.

78 FR 75557 - CE FLNG, LLC, CE Pipeline, LLC; Notice of Intent To Prepare an Environmental Impact Statement for...

Science.gov (United States)

2013-12-12

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. PF13-11-000] CE FLNG, LLC, CE Pipeline, LLC; Notice of Intent To Prepare an Environmental Impact Statement for the Planned CE FLNG Project, Request for Comments on Environmental Issues, and Notice of Public Scoping Meeting The staff of the Federal Energy Regulatory Commission ...

Inverted opal luminescent Ce-doped silica glasses

Directory of Open Access Journals (Sweden)

R. Scotti

2006-01-01

Full Text Available Inverted opal Ce-doped silica glasses (Ce : Si molar ratio 1 ⋅ 10−3 were prepared by a sol-gel method using opals of latex microspheres as templates. The rare earth is homogeneously dispersed in silica host matrix, as evidenced by the absence of segregated CeO2, instead present in monolithic Ce-doped SG with the same cerium content. This suggests that the nanometric dimensions of bridges and junctions of the host matrix in the inverted opal structures favor the RE distribution avoiding the possible segregation of CeO2.

XAFS Analysis of Local Structure around Ce in Ca3Sc2Si3O12:Ce Phosphor for White LEDs

International Nuclear Information System (INIS)

Akai, Toshio; Shigeiwa, Motoyuki; Okamoto, Kaoru; Shimomura, Yasuo; Kijima, Naoto; Honma, Tetsuo

2007-01-01

We have studied the local structure around Ce atom in Ca3Sc2Si3O12 host crystal, which has been developed as a new green phosphor for white light emitting diodes (LEDs). As the local structure and chemical environment of the dopant atom are very important to improve the performance of the phosphor, we have used XAFS to get chemical and structural information around the Ce dopant. The XANES spectrum of the Ce LIII-edge reveals that the Ce atom is trivalent in Ca3Sc2Si3O12. There are two kinds of possible Ce substitution sites, Ca site and Sc site, in garnet type Ca3Sc2Si3O12 crystal structure. The Ce atom is found to be at the Ca site in the host crystal by the comparison of the Fourier transform of Ce K-edge EXAFS spectrum with those of Ca and Sc K-edge EXAFS spectra. The theoretical analysis with FEFF also clarified the Ce substitution at the Ca site. Furthermore, the result of the analysis indicates the structural disorder around Ca and Si atoms at 3.75 A. It is possible that there are some defects around the Ca and Si atoms at 3.75 A to compensate the excess positive charge by introduced Ce3+ at the Ca2+ site

Synthesis and structural characterization of Ce-doped bismuth titanate

International Nuclear Information System (INIS)

Pavlovic, Nikolina; Srdic, Vladimir V.

2009-01-01

Ce-modified bismuth titanate nanopowders Bi 4-x Ce x Ti 3 O 12 (x ≤ 1) have been synthesized using a coprecipitation method. DTA/TG, FTIR, XRD, SEM/EDS and BET methods were used in order to investigate the effect of Ce-substitution on the structure, morphology and sinterability of the obtained powders. The phase structure investigation revealed that after calcinations at 600 deg. C powder without Ce addition exhibited pure bismuth titanate phase; however, powders with Ce (x = 0.25, 0.5 and 0.75) had bismuth titanate pyrochlore phase as the second phase. The strongest effect of Ce addition on the structure was noted for the powder with the highest amount of Ce (x = 1) having a cubic pyrochlore structure. The presence of pure pyrochlore phase was explained by its stabilization due to the incorporation of cerium ions in titanate structure. Ce-modified bismuth titanate ceramic had a density over 95% of theoretical density and the fracture in transgranular manner most probably due to preferable distribution of Ce in boundary region

Synthesis, extraction and electronic structure of Ce@C2n

Science.gov (United States)

Liu, Bing-Bing; Zou, Guang-Tian; Yang, Hai-Bin; Yu, San; Lu, Jin-Shan; Liu, Zi-Yang; Liu, Shu-Ying; Xu, Wen-Guo

1997-11-01

In view of the growing interest in endohedral lanthanide fullerenes, Ce, as a typical+ 4 oxidation state lanthanide element, has been systematically studied. The synthesis, extraction and electronic structure of Ce @ C2n are investigated. Soot containing Ce@C2n was synthesized in high yield by carbonizing CeO2-containing graphite rods and are back-burning the CeC2-enriched cathode deposit in a DC arc plasma apparatus. Ce@C2n dominated by Ce@C82, can be efficiently extracted from the insoluble part of the soot after toluene Soxhlet extraction by pyridine at high temperature and high pressure in a closed vessel. About 60% Ce@C2n(2n = 82, 80, 78, 76) and 35% Ce@C82 can be enriched in the pyridine extract. This fact is identified by desorption electron impact mass spectrometry (DEI MS). The electronic structure of Ce@C2n is analyzed by using X-ray photoemission spectroscopy (XPS) of pyridine-free film. It is suggested that the encapsulated Ce atom is in a charge state close to+ 3 and was effectively protected from reaction with water and oxygen by the enclosing fullerene cage. Unlike theoretical expectation, the electronic state of Ce@C82 is formally described as Ce+3@C3-82.

Quality certification - PETROBRAS differential. Exploration and Production - RN and CE States, Brazil

International Nuclear Information System (INIS)

Medeiros, Miguel A.C. de; Junior, Jose Ribamar C.

2000-01-01

This paper describes the PETROBRAS Exploration and Production -RN CE experience in implementation of Quality Systems based on ISO 9000 series standards applied on industrial gas and LPG production, oil treatment, power plants, petroleum equipment maintenance services, steam generation and distribution, reservoir studies and logistics. The ISO 9000 certification allowed several improvement in these processes. Besides the motivation of the teams, we can also see the results: heavy oil fields steam generation and distribution performance has increased from 70% to 90%; the production loss of NGL in the Natural Gas Processing Plant number 1, located in Guamare, decreased from an average of 50 m 3 /month to almost zero; the CTE - Power Plant of Alto do Rodrigues - had its performance increased in about 30 per cent between 1997 and 1999, increasing the power generation from 2,327 M wh/month to 3,017 M wh/month; and re-work level in Mossoro repair shop dropped from 4 per cent to 0,5 per cent. The paper also analyses the key factors for the success of the projects and how it made easy the job conduction for structuring and implementation of the systems, as: commitment of the upper management, resources from organization and well defined targets for the whole team. (author)

Health education: the family health teams' perspective and clients' participation Educación en salud: perspectiva del equipo de salud de la familia y la participación del usuario Educação em saúde: o olhar da equipe de saúde da família e a participação do usuário

Directory of Open Access Journals (Sweden)

Maria de Fátima Antero Sousa Machado

2009-04-01

Full Text Available This study aimed to understand the conception and performance of health education developed by the Family Health Team with a view to clients' participation. Qualitative study carried out with clients and professionals at the Family Health Program (FHP in Crato, CE, Brazil. Data were collected through semi-structured interviews and observation between May and September, 2005. Data were organized according to content analysis and literature. Findings indicate that professionals view health education as guidance and teaching focused on disease prevention and the participation of clients is perceived as listening and attention. Thus, FHP professionals need to broaden their understanding of health education and educative strategies, which should be culturally meaningful, so that clients freely and consciously decide on their participation and behavioral change in health.Este estudio tuvo como objetivo comprender la concepción y la actuación en Educación en Salud por parte del Equipo de Salud de la Familia buscando la participación del usuario. Se trata de un estudio cualitativo con usuarios y profesionales del Programa Salud de la Familia (PSF, del Municipio de Crato, estado de Ceará, Brasil. Los datos fueron recolectados a través de una entrevista semiestructurada y de observación, entre mayo y septiembre de 2005; fueron organizados mediante análisis de contenido con base en la literatura. Evidenciamos que el proceso educativo es percibido por los profesionales como orientar y enseñar a prevenir enfermedades. La participación de los usuarios significó escuchar y prestar atención. Se concluye que los profesionales del PSF necesitan ampliar la comprensión de la educación en salud y de estrategias educativas culturalmente significativas para que la participación y decisión de cambios de comportamiento en salud de los usuarios sean libres y conscientes.Este estudo objetivou compreender a concepção e a atuação de Educação em Sa

Ferroelectric relaxor Ba(TiCe)O3

International Nuclear Information System (INIS)

Chen Ang; Zhi Jing; Yu Zhi

2002-01-01

The dielectric behaviour of Ba(Ti 1-y Ce y )O 3 solid solutions (y=0-0.3) has been studied. A small amount of Ce doping (y=0.02) has weak influence on the dielectric behaviour of Ba(Ti 1-y Ce y )O 3 . With increasing Ce concentration, three phase transitions of pure BaTiO 3 are pinched into one rounded dielectric peak with frequency dispersion, and the relaxation time follows the Vogel-Fulcher relation. The evolution from a normal ferroelectric to a ferroelectric relaxor is emphasized. High strains (S=∼0.1-0.19%) with a small hysteresis under ac fields are obtained in ferroelectric relaxors Ba(Ti 1-y Ce y )O 3 . The physical mechanism of the relaxation process, the pinching effect of the phase transitions and their influence on the ferroelectric and electrostrictive behaviour are discussed. (author)

NMR study of CeCoSi3

International Nuclear Information System (INIS)

Iwamoto, Y.

1995-01-01

Low-temperature susceptibility, NMR and NQR of the 59 Co signal in CeCoSi 3 have been measured. CeCoSi 3 showed a superconducting transition at 0.7-1.2K. From NQR measurement, the nuclear quadrupole frequency and the full width at half maximum (FWHM) of 59 Co in CeCoSi 3 were estimated to be about 1.08MHz and 0.08MHz, respectively. The 59 Co nuclear spin-lattice relaxation rate (1/T 1 ) in CeCoSi 3 was proportional to the temperature (T) as the Fermi liquid state above the superconducting transition temperature (T c ), and then rapidly decreased below T c . ((orig.))

Distribution and Translocation of 141Ce (III) in Horseradish

Science.gov (United States)

Guo, Xiaoshan; Zhou, Qing; Lu, Tianhong; Fang, Min; Huang, Xiaohua

2007-01-01

Background and Aims Rare earth elements (REEs) are used in agriculture and a large amount of them contaminate the environment and enter foods. The distribution and translocation of 141Ce (III) in horseradish was investigated in order to help understand the biochemical behaviour and toxic mechanism of REEs in plants. Method The distribution and translocation of 141Ce (III) in horseradish were investigated using autoradiography, liquid scintillation counting (LSC) and electron microscopic autoradiography (EMARG) techniques. The contents of 141Ce (III) and nutrient elements were analysed using an inductively coupled plasma-atomic emission spectrometer (ICP-AES). Results The results from autoradiography and LSC indicated that 141Ce (III) could be absorbed by horseradish and transferred from the leaf to the leaf-stalk and then to the root. The content of 141Ce (III) in different parts of horseradish was as follows: root > leaf-stalk > leaf. The uptake rates of 141Ce (III) in horseradish changed with the different organs and time. The content of 141Ce (III) in developing leaves was greater than that in mature leaves. The results from EMARG indicated that 141Ce (III) could penetrate through the cell membrane and enter the mesophyll cells, being present in both extra- and intra-cellular deposits. The contents of macronutrients in horseradish were decreased by 141Ce (III) treatment. Conclusions 141Ce (III) can be absorbed and transferred between organs of horseradish with time, and the distribution was found to be different at different growth stages. 141Ce (III) can enter the mesophyll cells via apoplast and symplast channels or via plasmodesmata. 141Ce (III) can disturb the metabolism of macronutrients in horseradish. PMID:17921527

Traducerea: între ce se poate traduce și ce trebuie tradus

Directory of Open Access Journals (Sweden)

Magda Jeanrenaud

2016-02-01

Full Text Available Pornind de la o tulburătoare interpretare a lui Jacques Derrida, studiul de față își propune să investigheze și încearcă să explice blocajul ce intervine în versiunile englezești, franceze și românești (semnate de Antoine Berman, Alexis Nouss, Steven Rendall, Catrinel Pleșu etc. ale celebrului text al lui Walter Benjamin, Die Aufgabe des Übersetzers, atunci cînd traducătorii transpun în cele trei limbi țintă cele două citate cuprinse în acesta: un citat din Mallarmé, lăsat netradus de Benjamin însuși, și un altul, din Pannwitz. Într-un fel sau altul, ambele citate au o formă discursivă ce lasă să se întrevadă o sintaxă ce se abate deliberat de la normă, ca și cum ar fi deja niște „traduceri”. Analiza mai pune în evidență și comportamentul (cumva o dominantă a psihologiei traducătorilor? celor ce au transpus textul benjaminian, comportament marcat de obsesia lizibilității văzută ca o trăsătură congenitală a oricărei traduceri, chiar și atunci cînd textul original nu tinde spre aceasta. De unde și dilema, dureroasă, legată de spinoasa chestiune a intenționalității textului (nu doar de tradus...

SELF-ASSEMBLY CE OXIDE/ORGANOPOLYSILOXANE COMPOSITE COATINGS.

Energy Technology Data Exchange (ETDEWEB)

SUGAMA,T.; SABATINI,R.; GAWLIK,K.

2005-01-01

A self-assembly composite synthesis technology was used to put together a Ce(OH){sub 3}-dispersed poly-acetamide-acetoxyl methyl-propylsiloxane (PAAMPA) organometallic polymer. Three spontaneous reactions were involved; condensation, amidation, and acetoxylation, between the Ce acetate and aminopropylsilane triol (APST) at 150 C. An increase in temperature to 200 C led to the in-situ phase transformation of Ce(OH){sub 3} into Ce{sub 2}O{sub 3} in the PAAMPA matrix. A further increase to 250 C caused oxidative degradation of the PAAMPA, thereby generating copious fissures in the composite. We assessed the potential of Ce(OH){sub 3}/ and Ce{sub 2}O{sub 3}/ PAAMPA composite materials as corrosion-preventing coatings for carbon steel and aluminum. The Ce{sub 2}O{sub 3} composite coating displayed better performance in protecting both metals against NaCl-caused corrosion than did the Ce(OH){sub 3} composite. Using this coating formed at 200 C, we demonstrated that the following four factors played an essential role in further mitigating the corrosion of the metals: First was a minimum susceptibility of coating's surface to moisture; second was an enhanced densification of the coating layer; third was the retardation of the cathodic oxygen reduction reaction at the metal's corrosion sites due to the deposition of Ce{sub 2}O{sub 3} as a passive film over the metal's surface; and, fourth was its good adherence to metals. The last two factors contributed to minimizing the cathodic delamination of coating film from the metal's surface. We also noted that the affinity of the composite with the surface of aluminum was much stronger than that with steel. Correspondingly, the rate of corrosion of aluminum was reduced as much as two orders of magnitude by a nanoscale thick coating. In contrast, its ability to reduce the corrosion rate of steel was lower than one order of magnitude.

Resonant photoemission study of CeRu4Sb12

International Nuclear Information System (INIS)

Ishii, Hiroyoshi; Miyahara, Tsuneaki; Takayama, Yasuhiro; Shiozawa, Hidetsugu; Obu, Kenji; Matsuda, Tatsuma D.; Aoki, Yuji; Sugawara, Hitoshi; Sato, Hideyuki

2005-01-01

We have measured the Ce 4d-4f and Ce 3d-4f resonant photoemission spectra of CeRu 4 Sb 12 . The Ce 4f spectra show the spectral features corresponding to a weakly hybridized system. The number of 4f electrons is estimated to be ∼1.0

Preparation and luminescence properties of Ce3+ and Ce3+/Tb(3+)-activated Y4Si2O7N2 phosphors.

Science.gov (United States)

Xia, Zhiguo; Wu, Weiwei

2013-09-28

Ce(3+) and Ce(3+)/Tb(3+)-activated Y4Si2O7N2 phosphors are synthesized by the solid-state method, which can be efficiently excited by near ultraviolet (UV) light emitting diode (LED) chips. The PL spectrum of Y4Si2O7N2:Ce(3+) shows a broad hump between 380 and 650 nm, assigned to the electron transition from the 4f energy level to different 5d sub levels of the Ce(3+) ions at different Y(3+) sites. The color of the Y4Si2O7N2:Ce(3+) phosphor can shift from blue to green by introducing Tb(3+). In addition, the energy transfer process from Ce(3+) to Tb(3+) in the Y4Si2O7N2 host was investigated and discussed in terms of both the luminescence spectra and decay curves. The energy transfer critical distance has been calculated and evaluated by the concentration quenching method. Therefore, the Ce(3+) and Ce(3+)/Tb(3+)-activated Y4Si2O7N2 phosphors can serve as key materials for phosphor-converted white-light UV-LEDs.

Radiometric survey in the sites of Regional office in Fortaleza, research gallery and camp in Itataia, CE (Brazil)

International Nuclear Information System (INIS)

1982-02-01

The radiometric survey in Regional officer sites in Fortaleza, Brazil, research gallery and camp in Itataia is presented. The measurings to be done, the instrumentation used and results obtained are described as well as the conclusions and recommendations. (C.M.) [pt

Ethanol Sensor of CdO/Al2O3/CeO2 Obtained from Ce-DOPED Layered Double Hydroxides with High Response and Selectivity

Science.gov (United States)

Xu, Dongmei; Guan, Meiyu; Xu, Qinghong; Guo, Ying; Wang, Yao

2013-04-01

In this paper, Ce-doped CdAl layered double hydroxide (LDH) was first synthesized and the derivative CdO/Al2O3/CeO2 composite oxide was prepared by calcining Ce-doped CdAl LDH. The structure, morphology and chemical state of the Ce doped CdAl LDH and CdO/Al2O3/CeO2 were also investigated by X-ray diffraction (XRD), Fourier transform infrared (FT-IR), solid state nuclear magnetic resonance (SSNMR), scanning electron microscope (SEM) and X-ray photoelectron spectroscopy (XPS). The gas sensing properties of CdO/Al2O3/CeO2 to ethanol were further studied and compared with CdO/Al2O3 prepared from CdAl LDH, CeO2 powder as well as the calcined Ce salt. It turns out that CdO/Al2O3/CeO2 sensor shows best performance in ethanol response. Besides, CdO/Al2O3/CeO2 possesses short response/recovery time (12/72 s) as well as remarkable selectivity in ethanol sensing, which means composite oxides prepared from LDH are very promising in gas sensing application.

Study in pilot plant of the Itataia phosphoro-uraniferous ore - CE (Brazil)

International Nuclear Information System (INIS)

Reis Junior, J.B.; Aquino, J.A. de; Oliveira Luz, I.L. de.

1987-01-01

Pilot plant data have been obtained for the physical treatment studies of the Itataia, phosphoro-uraniferous ore body located in the state of Ceara-Brazil. Due to the presence of the silic-carbonated gangue, which turns the ore complex, the pilot plant operation comprised 1200 hours. From the results obtained, it was possible to stablish a basic flowsheet for the concentration process. Such process includes a grinding step followed by a cyclone disliming (d 50 =10μm). The cyclone underflow feeds the flotation step. The conventional flotation process, which envolves the direct phosphate flotation followed by cleaning steps, was not efficient due to the presence of the carbonated gangue. In fact, the presence of silicates and carbonates in the gangue required that the flotation would be carried out in two steps. The silicated gangue is eliminated in the first flotation and a phosphate concentrate with significant amount of carbonates is obtained. This concentrate is fed to the second flotation step, termed reverse flotation, where the calcite is floated and the apatite is depressed. (Author) [pt

Study in pilot plant of the Itataia phosphoro-uraniferous ore (CE,Brazil)

International Nuclear Information System (INIS)

Reis Junior, J.B.; Aquino, J.A. de; Oliveira Luz, I.L. de

1985-01-01

Pilot plant data have been obtained for the physical treatment studies of the Itataia, phosphoro-uraniferous ore body located in the state of Ceara-Brazil. Due to the presence of the silic-carbonated gangue, which turns the ore complex, the pilot plant operation comprised 1200 hours. From the results obtained, it was possible to establish a basic flowsheet for the concentration process. Such process includes a grinding step (-65) followed by a cyclone disliming (d50 = 10μ). The cyclone underflow feeds the flotation step. The conventional flotation process, which envolves the direct phosphate flotation followed by cleaning steps, was not efficient due to the presence of the carbonated gangue. In fact, the presence of silicates and carbonates in the gangue required that the flotation would be carried out in two steps. The silicated gangue is eliminated in the first flotation and a phosphate concentrate with significant amount of carbonates is obtained. This concentrate is fed to the second flotation step, termed reverse flotation, where the calcite is floated and the apatite is depressed. (Author) [pt

Luminescent and scintillation properties of the Ce3+ doped Y3−xLuxAl5O12:Ce single crystalline films

International Nuclear Information System (INIS)

Zorenko, Yu.; Gorbenko, V.; Zorenko, T.; Popielarski, P.; Mosińska, L.; Fedorov, A.

2016-01-01

The work is related to the investigation of scintillation and luminescent properties of single crystalline films (SCF) of solid solutions of Ce 3+ doped Y 3−x Lu x Al 5 O 12 :Ce garnets with x value in the 0–3 range. We have shown a possibility of realization of high-energy shift of the Ce 3+ ion emission spectrum in these garnets up to 22 nm. We have also found that the light yield of the radioluminescence under α-particle excitation of LuAG:Ce SCF can exceed by 1.3 times the corresponding values for the YAG:Ce SCF counterpart. For investigation of the luminescent properties of Y 3−x Lu x Al 5 O 12 :Ce SCF at different x values the luminescent spectroscopy of these SCFs under excitation by synchrotron radiation in the VUV range was performed. - Highlights: • Single crystalline films of Y 3−x Lu x Al 5 O 12 garnets at x=0–3.0 were grown by LPE method onto YAG substrates. • Lattice constant of Y 3−x Lu x Al 5 O 12 :Ce film and the film/substrate misfit changed linearly with increasing of Lu content in the x=0–3.0 range. • High-energy shift of the Ce 3+ emission up to 22 nm in Y 3−x Lu x Al 5 O 12 film with increasing of Lu content in the x=0–3.0 range. • Light yield of Y 3−x Lu x Al 5 O 12 :Ce film decreases in the x=0–1.8 range and increases in the x=1.8–3.0 range. • Scintillation LY of Lu 3 Al 5 O 12 :Ce film can exceed by 1.3 times the LY for YAG:Ce film counterpart.

Homogeneously dispersed CeO2 nanoparticles on exfoliated hexaniobate nanosheets

Science.gov (United States)

Marques, Thalles M. F.; Strayer, Megan E.; Ghosh, Anupama; Silva, Alexandre; Ferreira, Odair P.; Fujisawa, Kazunori; Alves da Cunha, Jose R.; Abreu, Guilherme J. P.; Terrones, Mauricio; Mallouk, Thomas E.; Viana, Bartolomeu C.

2017-12-01

Hexaniobate nanosheets derived from the parent compound K4Nb6O17 have been decorated with CeO2 nanoparticles by ion exchange with aqueous cerium (IV) solution. Very homogeneous CeO2 nanoparticle decoration of the hexaniobate sheets can be achieved by this method and the resulting composites may absorb visible light. HRTEM images show that ∼3.0 nm diameter CeO2 nanoparticles adhere to hexaniobate nanosheets that are exfoliated and then restacked prior to Ce deposition. The interfacial interaction between CeO2 nanoparticles and nanosheets would be due to an electrostatic attraction mechanism. Raman and XRD measurements have given strong evidence that CeO2 nanoparticles have fluorite structure. EDS, FTIR and XPS results suggest almost complete exchange of TBA+ and K+ by Ce4+. Cerium ion exchange on the acid exchanged parent compound, H2.9K1.1Nb6O17, revealed that the extent of Ce ion exchange is much greater in case of nanosheets, which may be rationalized by the larger surface area available after exfoliation. XPS measurements show that the ratio of Ce4+/Ce3+ is around 4.4, in agreement with the formation of fluorite structure (CeO2). Thus, these CeO2 nanoparticle/nanosheet composites may be useful for catalytic processes.

Electro-regeneration of Ce(IV) in real spent Cr-etching solutions

International Nuclear Information System (INIS)

Chen, Te-San; Huang, Kuo-Lin

2013-01-01

Highlights: • An electrochemical process is used to regenerate Ce(IV) in real (hazardous) spent TFT-LCD Cr-etching solutions. • The Ce(IV) yield on tested anodes was in order BDD > Pt > DSA. • A Neosepta CMX separator was better than Nafion ones to be used in the process. • The activation energy on Pt was 10.7 kJ/mol. • The obtained parameters are useful to design reactors for 100% Ce(IV) regeneration in real spent Cr-etching solutions. -- Abstract: This paper presents the electro-regeneration of Ce(IV) in real (hazardous) spent thin-film transistor liquid-crystal display (TFT-LCD) Cr-etching solutions. In addition to Ce(III) > Ce(IV) in diffusivity, a quasi-reversible behavior of Ce(III)/Ce(IV) was observed at both boron-doped diamond (BDD) and Pt disk electrodes. The Ce(IV) yield on Pt increased with increasing current density, and the best current efficiency (CE) was obtained at 2 A/2.25 cm 2 . The performance in terms of Ce(IV) yield and CE of tested anodes was in order BDD > Pt > dimensional stable anode (DSA). At 2 A/2.25 cm 2 on Pt and 40 °C for 90 min, the Ce(IV) yield, CE and apparent rate constant (k) for Ce(III) oxidation were 81.4%, 21.8% and 3.17 × 10 −4 s −1 , respectively. With the increase of temperature, the Ce(IV) yield, CE, and k increased (activation energy = 10.7 kJ/mol), but the specific electricity consumption decreased. The Neosepta CMX membrane was more suitable than Nafion-117 and Nafion-212 to be used as the separator of the Ce(IV) regeneration process. The obtained parameters are useful to design divided batch reactors for the Ce(IV) electro-regeneration in real spent Cr-etching solutions

Loparite-(Ce) from the Khibiny Alkaline Pluton, Kola Peninsula, Russia

Science.gov (United States)

Konopleva, N. G.; Ivanyuk, G. Yu.; Pakhomovsky, Ya. A.; Yakovenchuk, V. N.; Mikhailova, Yu. A.

2017-12-01

Data on the occurrence, morphology, anatomy, composition, and formation conditions of loparite-(Ce) in the Khibiny alkaline pluton are given. Loparite-(Ce), (Na,Ce,Sr)(Ce,Th)(Ti,Nb)2O6, resulted from metasomatic alteration and assimilation of metamorphic host rocks at the contact with foyaite as well as foyaite on the contact with foidolite. This alteration was the highest in pegmatite, and albitite developed there. A decrease in temperature resulted in enrichment of the perovskite and tausonite endmembers in loparite-(Ce) owing to a decrease in the loparite and lueshite endmembers. La and Ce sharply predominate among rare earth elements in the composition of loparite-(Ce).

Single-crystal FCC and DHCP phases in Ce/Pr superlattices

International Nuclear Information System (INIS)

Lee, S.; Goff, J.P.; Ward, R.C.C.; Wells, M.R.; McIntyre, G.J.

2002-01-01

Cerium usually comprises a mixture of polycrystalline FCC and DHCP allotropes. Single-crystal Ce has been stabilised in Ce/Pr superlattices grown using molecular beam epitaxy. It is found that FCC or DHCP phases can be obtained depending on superlattice composition and growth conditions. Low-temperature neutron scattering was performed on Ce/Pr samples using the triple-axis spectrometer D10 at the ILL. Such measurements revealed one sample, [Ce 20 Pr 20 ] 60 , to be a single crystal with a DHCP unit cell; while another, [Ce 30 Pr 10 ] 56 , was a mixture of FCC and DHCP phases. Antiferromagnetic ordering of magnetic moments was observed in the DHCP sample (T N =11.1 K) with a magnetic structure similar to that found in bulk β-Ce. Surprisingly, the magnetic ordering was found to be confined to single Ce blocks. Furthermore, it was found that, at low temperatures, the lattice contraction observed for bulk FCC Ce was suppressed in Ce/Pr superlattices. (orig.)

Facile hydrothermal synthesis of CeO 2 nanopebbles

Indian Academy of Sciences (India)

Cerium oxide (CeO2) nanopebbles have been synthesized using a facile hydrothermal method. X-ray diffraction pattern (XRD) and transmission electron microscopy analyses confirm the presence of CeO2 nanopebbles. XRD shows the formation of cubic fluorite CeO2 and the average particle size estimated from the ...

CEF-scheme of a semimetal Ce3Sn7

International Nuclear Information System (INIS)

Okuda, Yusuke; Yamamoto, Takeshi; Honda, Daisuke; Shishido, Hiroaki; Galatanu, Andrei; Haga, Yoshinori; Matsuda, Tatsuma D.; Takeuchi, Tetsuya; Kindo, Koichi; Sugiyama, Kiyohiro; Settai, Rikio; O-bar nuki, Yoshichika

2005-01-01

We measured the magnetic susceptibility and magnetization of an antiferromagnet Ce 3 Sn 7 with the orthorhombic crystal structure. The experimental data are found to be well explained on the basis of the crystalline electric field (CEF) 4f-scheme under the assumption that two Ce atoms in the 2(a) site possess a magnetic moment of 0.36μ B /Ce and one Ce atom in the 4(i) site possesses no magnetic moment as in a valence fluctuating compound CeSn 3 , which was previously proposed by Bonnet et al. Furthermore, we carried out the de Haas-van Alphen experiment. The detected Fermi surfaces are many in number but are extremely small in volume, indicating that Ce 3 Sn 7 is a semimetal

Tunable colorimetric performance of Al{sub 2}O{sub 3}-YAG:Ce{sup 3+} eutectic crystal by Ce{sup 3+} concentration

Energy Technology Data Exchange (ETDEWEB)

Sai, Qinglin, E-mail: saiql@siom.ac.cn; Xia, Changtai, E-mail: xia_ct@siom.ac.cn

2017-06-15

Ce-doped Al{sub 2}O{sub 3}-YAG eutectics with different percentage of Ce were successfully grown by the optical floating zone technique. X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used to investigate the structure. The results show that they have typical eutectic structure of interpenetrating sapphire and garnet phases with the tens of microns lamella spacing. The photoluminescence spectra of the eutectics showed that they have wide excitation band, and samples with 1.6 mol% Ce-doped has the highest emission intensity. The eutectic-packaged LED has high luminous efficiency and its color can be modulated by changing Ce concentration. The results reveal that Ce-doped Al{sub 2}O{sub 3}-YAG eutectic is a promising phosphor for white LED applications.

CeO2-ZrO2 ceramic compounds

International Nuclear Information System (INIS)

Melo, F.C.L.; Cairo, C.A.C.; Devezas, T.C.; Nono, M.C.A.

1988-01-01

In order to study the mechanical properties of tetragonal polycrystal zirconia stabilized with ceria various powder compositions with different CeO 2 content were made. Modulus of rupture for those compounds was measured. Tetragonal retained phase was determined for samples of CeO 2 -ZrO 2 ceramics with and without superficial mechanical treatment. The experimental results allowed us to evaluate the effects of CeO 2 content and sintering temperature in the mechanical properties and tetragonal transformed phase (t→ m) in ceramics of CeO 2 -ZrO 2 systems. (author) [pt

Measurement of Ce(IV) Concentration in Foam Decontaminant containing Fluorosurfactant

Energy Technology Data Exchange (ETDEWEB)

Jung, Chong Hun; Yang, H. B.; Yoon, I. H.; Choi, W. K.; Moon, J. K. [KAERI, Daejeon (Korea, Republic of); Lee, J. S. [Gachon University, Seongnam (Korea, Republic of)

2016-05-15

To improve the stability of the foam, surfactants and inorganic materials such as nanoparticles can be added. A nanoparticle-based foam decontaminant is composed of a surfactant and nanoparticles for the generation and maintenance of foam, and a chemical decontamination agent made of Ce(IV) dissolved in nitric acid. Ce(IV) will be reduced to Ce(III) through the decontamination process. Oxidizing the cerium (III) can be reused as a decontamination agent, Ce(IV). Oxidation treatment technology by ozone uses its strong oxidizing power. It can be regarded as an environmentally friendly process, because ozone cannot be stored and transported like other industrial gases (because it quickly decays into diatomic oxygen) and must therefore be produced on site, and used ozone can be decomposed immediately. A concentration analysis of Ce(IV) in foam decontaminant containing a surfactant is necessary prior to the derivation of optimal conditions for the regeneration of Ce(III) through ozonation treatment. A UV spectrometric method using the absorbance or potentiometric method with a potential difference in Ce(III)/Ce(IV), or a potentiometric titration method using Fe (II), can be used for a Ce(IV) concentration analysis. A UV spectrometric method has a problem receiving the influence of the surfactant, and a potentiometric method is difficult to use because of the problem of an insignificant change in the potential difference value of the Ce(III)/Ce(IV). Thus, the present study was undertaken to determine whether the potentiometric titration method can be used for an analysis of the Ce(IV) concentration in the nanoparticle-based foam decontaminant containing surfactant. It will be effectively used for the Ce(IV) concentration measurement, in relation to the subsequent research on the derivation of optimal conditions for the regeneration of Ce(III) through ozonation treatment.

Toxicity of inhaled 144CeCl3 in beagle dogs

International Nuclear Information System (INIS)

Muggenburg, B.A.; Hahn, F.F.; Boecker, B.B.; McClellan, R.O.; Pickrell, J.A.

1980-01-01

The metabolism, dosimetry and effects of inhaled 144 CeCl 3 in beagle dogs are being studied to assess the biological consequences of inhaling 144 Ce. Studies have shown that the 144 Ce deposited in the lung as 144 CeCl 3 is translocated at a moderately rapid rate to liver and skeleton and that significant radiation doses are accumulated by all three organs. Fifty-five dogs that inhaled 144 CeCl 3 and 17 control dogs are being observed for their life span. The 144 Ce-exposed dogs had long-term retained burdens that ranged from 2.6 to 360 μCi 144 Ce/kg body weight. Fifty-three of the dogs exposed to 144 CeCl 3 have died and twelve control dogs have died. Serial observations are continuing on the two surviving exposed dogs and five control dogs

Physical, biochemical and genetic characterization of enterocin CE5-1 produced by Enterococcus faecium CE5-1 isolated from Thai indigenous chicken intestinal tract

Directory of Open Access Journals (Sweden)

Kraiyot Saelim

2015-06-01

Full Text Available Enterocin CE5-1 produced by Enterococcus faecium CE5-1 isolated from the chicken gastrointestinal tract was active in the wide range of pH 2-10 and temperature 30-100°C and sensitive to proteolytic enzymes and -amylase. It remained active after storage at -20°C for 2 months. Moreover, enterocin CE5-1 showed antibacterial activity against lactobacilli, bacilli, listeria, staphylococci and enterococci, especially antibiotic-resistant enterococci. In vitro study of enterocin CE5-1 decreased the population of Ent. faecalis VanB from 6.03 to 4.03 log CFU/ml. The lethal mode of action of enterocin CE5-1 appeared to be pore and filament formation in the cell wall. PCR sequencing analysis revealed the presence of two open reading frames (ORFs, containing enterocin CE5-1 (entCE5-1 and enterocin immunity (entI gene. Therefore, enterocin CE5-1 from Ent. faecium CE5-1 could possibly be used as an antimicrobial agent to control foodborne pathogen, spoilage bacteria and antibiotic-resistant enterococci in foods, feeds and the environments.

Itinerant f-electron behavior in Ce and U compounds

International Nuclear Information System (INIS)

Crabtree, G.W.

1985-04-01

The experimentally observed Fermi surface properties in URh 3 , UIr 3 , UGe 3 , CeSn 3 , CeB 6 , U 3 As 4 , U 3 P 4 , and CeSb are reviewed. For the compounds with no magnetic order, band structure models of the Fermi surface geometry are confirmed and f-ligand hybridization is found to be dominant. For CeB 6 , U 3 As 4 , and U 3 P 4 the experiments show that both local moments and f hybridization are important. In CeSb new data can be explained by a purely local model with no f-hybridization

Structure and phase composition of Al-Ce-Cu system alloys in range of quasi-binary Al-Al8CeCu4 section

International Nuclear Information System (INIS)

Belov, N.A.; Khvan, A.V.

2007-01-01

The phase diagram of the Al-Cu-Ce system in the quasibinary section area of Al-Al 8 CeCu 4 has been investigated by metallographic, thermal, micro-X-ray spectral and X-ray structural analyses. The parameters of the eutectic reaction L→(Al)+CeCu 4 Al 8 : T=610 Deg C were found out; the composition was 14% Cu and 7% Ce. This eutectics is of a disperse structure and the ternary compound contained is capable of fragmentation and spheroidizing in the heating process (starting from 540 Deg C). It was demonstrated that the area of optimal (Al)+CeCu 4 Al 8 eutectics-based alloy compositions was within the narrow limits. That is related to the fact that at a comparatively little variation of the Cu:Ce=2 ratio solidus sharply decreases and, as a result, the crystallization interval considerably extends [ru

Microstructures and luminescent properties of Ce-doped transparent mica glass-ceramics

International Nuclear Information System (INIS)

Taruta, Seiichi; Iwasaki, Yoshitomo; Nishikiori, Hiromasa; Yamakami, Tomohiko; Yamaguchi, Tomohiro; Kitajima, Kunio; Okada, Kiyoshi

2012-01-01

Highlights: ► Ce-doped transparent glass-ceramics and their parent glasses. ► TEM and STEM images for the microstructures. ► Each mica crystal did not contain Ce uniformly. ► Emission due to Ce 3+ ions in the glass phase and/or Ce 3+ ions in the mica crystals. - Abstract: Transparent mica glass-ceramics were prepared by heating parent glasses that had been doped with 0.5–15 mol% CeO 2 . During the melting and heat treatment, Ce 4+ ions in the specimens were reduced to Ce 3+ ions, and one or both of these ion species were then replaced with Li + ions in the interlayers of the separated mica crystals. However, scanning transmission electron microscope (STEM) and Z-contrast imaging revealed that the mica crystals did not contain the same amount of Ce. On excitation at 254 nm, the parent glasses and glass-ceramics emitted blue light, which originated from the 5d to 4f transition of the Ce 3+ ions. The emission of the glass-ceramic containing a smaller amount of Ce was attributed to the Ce 3+ ions in both the glass phase and the mica crystals, whereas that of the glass-ceramics containing a larger amount of Ce was caused mainly by Ce 3+ ions in the mica crystals. The dependence of the emission band of the parent glasses on the amount of Ce was a unique feature of the Ce-doped transparent mica glass-ceramics and was not observed in previous studies of Eu-doped parent glasses and mica glass-ceramics.

Metallic oxides supported in CeO{sub 2} and CeO{sub 2}-La{sub 2} O{sub 3} for low temperature shift reaction; Oxidos metalicos suportados em CeO{sub 2} e CeO{sub 2}-La{sub 2} O{sub 3} para reacao shift a baixa temperatura

Energy Technology Data Exchange (ETDEWEB)

Maluf, Silvia Salua; Assaf, Elisabete Moreira [Universidade de Sao Paulo (USP), Sao Carlos, SP (Brazil). Inst. de Quimica]. E-mail: sil_maluf@iqsc.usp.br

2008-07-01

This work studied copper and zinc oxides supported in CeO{sub 2} and CeO{sub 2}/La{sub 2}O{sub 3}. The catalytic tests for low temperature shift reaction, carried out for samples, showed the Cu-Ce catalyst presents the highest value of CO conversion (50%) and after the Cu-Ce-La catalysts (30%). The other catalysts showed CO conversion in range of 15%. This behavior is related with surface area, and also with the amount of Cu in the surface of samples (author)

Electron traps and scintillation mechanism in YAlO3:Ce and LuAlO3:Ce scintillators

International Nuclear Information System (INIS)

Wojtowicz, A.J.; Glodo, J.; Drozdowski, W.; Przegietka, K.R.

1998-01-01

In this paper we present the results of thermoluminescence, isothermal decay and scintillation light yield measurements on two isostructural scintillator materials, YAlO 3 :Ce and LuAlO 3 :Ce. In addition to the variety of deep traps identified by thermoluminescence and isothermal decays, scintillation light yield experiments demonstrate the presence in both materials of a number of relatively shallow traps. While the deep traps may reduce the scintillation light yield, they do not influence the kinetics of the process. The shallow traps, on the other hand, by interfering with the process of radiative recombination of charge carriers via Ce 3+ ions, can strongly affect not only the yield of the scintillation process but its kinetics as well. The presence of shallow traps provides a consistent explanation for a number of poorly understood relationships between the two scintillator materials, including a higher room temperature scintillation light yield and longer scintillation decay time in YAlO 3 :Ce, and a longer scintillation rise time in LuAlO 3 :Ce. Theoretical analysis indicates that elimination of these traps would make the two materials nearly identical in scintillator performance. Although the specific identity of all traps remains elusive, the performance of both scintillator materials is now, in practical terms, fully understood. (Copyright (c) 1998 Elsevier Science B.V., Amsterdam. All rights reserved.)

Thermodynamic stability studies of Ce-Sb compounds with Fe

Science.gov (United States)

Xie, Yi; Zhang, Jinsuo; Benson, Michael T.; Mariani, Robert D.

2018-02-01

Lanthanide fission products can migrate to the fuel periphery and react with cladding, causing fuel-cladding chemical interaction (FCCI). Adding a fuel additive dopant, such as Sb, can bind lanthanide, such as Ce, into metallic compounds and thus prevent migration. The present study focuses on the thermodynamic stability of Ce-Sb compounds when in contact with the major cladding constituent Fe by conducting diffusion couple tests. Ce-Sb compounds have shown high thermodynamic stability as they did not react with Fe. When Fe-Sb compounds contacted with Ce, Sb was separated out of Fe-Sb compounds and formed the more stable Ce-Sb compounds.

Resistance to {gamma} irradiation of LaBr{sub 3}:Ce and LaCl{sub 3}:Ce single crystals

Energy Technology Data Exchange (ETDEWEB)

Normand, S. [CEA-Recherche Technologique, DETECS/SSTM CE Saclay F-91191 Gif Sur Yvette Cedex (France)]. E-mail: stephane.normand@cea.fr; Iltis, A. [Saint-Gobain Crystals, 104 Route de Larchant, 77140 St Pierre les Nemours (France); Bernard, F. [Saint-Gobain Crystals, 104 Route de Larchant, 77140 St Pierre les Nemours (France); Domenech, T. [CEA-Recherche Technologique, DETECS/SSTM CE Saclay F-91191 Gif Sur Yvette Cedex (France); Delacour, P. [CEA-Recherche Technologique, DETECS/SSTM CE Saclay F-91191 Gif Sur Yvette Cedex (France)

2007-03-11

LaBr{sub 3}:Ce (Brillance 380) and LaCl{sub 3}:Ce (Brillance 350) both exhibit a very good energy resolution and energy linearity response. They are also more sensitive to {gamma}-rays than NaI(Tl) detectors, due to their higher density. The aim of this work is to determine the behaviour of those new single crystals in comparison with NaI(Tl) under severe {gamma}-ray irradiation. Therefore we have irradiated three 25 by 25 mm cylinder crystals encapsulated in air-tight aluminium housing with {sup 60}Co beam. Crystals were tested as stand-alone material not to test the impact of radiation to our photomultiplier tube (PMT). Only encapsulated crystals (alone, without PMTs) were irradiated during several periods to achieve the final 3.4 kGy integrated dose. Intermediate measurements of {sup 137}Cs spectrum were done in order to evaluate the impact of the dose on the studied crystal performances. The radiation hardness of LaBr{sub 3}:Ce and LaCl{sub 3}:Ce was then compared to NaI(Tl). We show in this paper that up to 3.4 kGy no permanent modification of the energy resolution nor colour change is observed for LaBr{sub 3}:Ce and LaCl{sub 3}:Ce crystals. The light output also seems quite stable. This is in stark contrast with the behaviour of NaI:Tl which exhibits continuously decreasing light output, colour change and worsening of energy resolution for doses above 5 Gy.

Ni-CeO2 Cermets Synthesis by Solid State Sintering of Ni/CeO2 Multilayer

Directory of Open Access Journals (Sweden)

Aleksandras ILJINAS

2013-12-01

Full Text Available Nickel and gadolinium doped cerium oxide (GDC cermet is intensively investigated for an application as an anode material for solid oxide fuel cells based on various electrolytes. The purpose of the present investigation is to analyze morphology, microstructure, and optical properties of deposited and annealed for one hour in the temperatures from 500 ºC to 900 ºC Ni/CeO2 multilayer thin films deposited by sputtering. The crystallographic structure of thin films was investigated by X-ray diffraction. The morphology of the film cross-section was investigated with scanning electron microscope. The elemental analysis of samples was investigated by energy-dispersive X-ray spectroscopy. The fitting of the optical reflectance data was made using Abeles matrix method that is used for the design of interference coatings. The film cross-section of the post-annealed samples consisted of four layers. The first CeO2 layer (on Si had the same fine columnar structure with no features of Ni intermixing. The part of Ni (middle-layer after annealing was converted to NiO with grain size exceeding 100 nm. The CeO2 layer deposited on Ni was divided into two layers. Lower layer had small grains not exceeding 25 nm and consisting of NiO and CeO2 mixture. Upper layer consisted of CeO2 columns with approximate thickness of 50 nm. Ni sample annealed at 600 ºC was fully oxidized. The NiO thickness and refraction index were almost steady after annealing in various temperatures. The approximation of experimental reflectance data was successful only for the samples with one transparent homogeneous layer. The reflectance of the Ni/CeO2 samples annealed at intermediate temperatures could not be fitted using one-layer or three-layer model. That may show that a simplified model could not be implemented.  The real system has complicated distribution of refraction index. DOI: http://dx.doi.org/10.5755/j01.ms.19.4.3073

A pressure study of CePt{sub 3}B

Energy Technology Data Exchange (ETDEWEB)

Rauch, Daniela; Suellow, Stefan [Institute of Condensed Matter Physics, University of Technology Braunschweig, Braunschweig (Germany); Hartwig, Steffen [Institute of Condensed Matter Physics, University of Technology Braunschweig, Braunschweig (Germany); BENSC, Helmholtz Zentrum Berlin, Berlin (Germany); Hidaka, Hiroyuki; Yamazaki, Seigo; Amitsuka, Hiroshi [Department of Physics, Hokkaido University, Sapporo (Japan); Bauer, Ernst [Institute of Solid State Physics, Vienna University of Technology, Vienna (Austria)

2013-07-01

CePt{sub 3}B is isostructural to the non-centro symmetric heavy-fermion superconductor CePt{sub 3}Si. In contrast to the latter system, CePt{sub 3}B exhibits a complex magnetically ordered state at low temperatures, with an antiferromagnetic phase below T{sub N}=7.8 K and a weakly ferromagnetic transition below T{sub C}∼5 K. CePt{sub 3}B can be understand as a low pressure variant of CePt{sub 3}Si. Here we report a study of CePt{sub 3}B by means of high pressure magnetization measurements, this way in particular accessing the pressure evolution of the ferromagnetic transition temperature T{sub C}. From our investigation up to about 40 kbar we observe an almost constant transition temperature T{sub C} with pressure. This behavior we discuss in the context of alloying studies on this material.

Correlated electronic structure of CeN

Energy Technology Data Exchange (ETDEWEB)

Panda, S.K., E-mail: swarup.panda@physics.uu.se [Department of Physics and Astronomy, Uppsala University, P.O. Box 516, SE-751 20 Uppsala (Sweden); Di Marco, I. [Department of Physics and Astronomy, Uppsala University, P.O. Box 516, SE-751 20 Uppsala (Sweden); Delin, A. [Department of Physics and Astronomy, Uppsala University, P.O. Box 516, SE-751 20 Uppsala (Sweden); KTH Royal Institute of Technology, School of Information and Communication Technology, Department of Materials and Nano Physics, Electrum 229, SE-164 40 Kista (Sweden); KTH Royal Institute of Technology, Swedish e-Science Research Center (SeRC), SE-100 44 Stockholm (Sweden); Eriksson, O., E-mail: olle.eriksson@physics.uu.se [Department of Physics and Astronomy, Uppsala University, P.O. Box 516, SE-751 20 Uppsala (Sweden)

2016-04-15

Highlights: • The electronic structure of CeN is studied within the GGA+DMFT approach using SPTF and Hubbard I approximation. • 4f spectral functions from SPTF and Hubbard I are coupled to explain the various spectroscopic manifestations of CeN. • The calculated XPS and BIS spectra show good agreement with the corresponding experimental spectra. • The contribution of the various l-states and the importance of cross-sections for the photoemission process are analyzed. - Abstract: We have studied in detail the electronic structure of CeN including spin orbit coupling (SOC) and electron–electron interaction, within the dynamical mean-field theory combined with density-functional theory in generalized gradient approximation (GGA+DMFT). The effective impurity problem has been solved through the spin-polarized T-matrix fluctuation-exchange (SPTF) solver and the Hubbard I approximation (HIA). The calculated l-projected atomic partial densities of states and the converged potential were used to obtain the X-ray-photoemission-spectra (XPS) and Bremstrahlung Isochromat spectra (BIS). Following the spirit of Gunnarsson–Schonhammer model, we have coupled the SPTF and HIA 4f spectral functions to explain the various spectroscopic manifestations of CeN. Our computed spectra in such a coupled scheme explain the experimental data remarkably well, establishing the validity of our theoretical model in analyzing the electronic structure of CeN. The contribution of the various l-states in the total spectra and the importance of cross sections are also analyzed in detail.

Luminescence and Tb3+-Ce3+-Eu3+ ion energy transfer in single-crystalline films of Tb3Al5O12:Ce,Eu garnet

International Nuclear Information System (INIS)

Zorenko, Y.; Gorbenko, V.; Voznyak, T.; Batentschuk, M.; Osvet, A.; Winnacker, A.

2008-01-01

The paper is devoted to investigation of the processes of excitation energy transfer between the host cations (Tb 3+ ions) and the activators (Ce 3+ and Eu 3+ ions) in single-crystalline films of Tb 3 Al 5 O 12 :Ce,Eu (TbAG:Ce,Eu) garnet which is considered as a promising luminescent material for the conversion of LED's radiation. The cascade process of excitation energy transfer is shown to be realized in TbAG:Ce,Eu: (i) from Tb 3+ ions to Ce 3+ and Eu 3+ ions; (ii) from Ce 3+ ions to Eu 3+ ions by means of dipole-dipole interaction and through Tb 3+ ion sublattice

Scintillation response of BaF2 and YAlO3:Ce (YAP:Ce) to energetic ions

International Nuclear Information System (INIS)

Slunga, E.; Cederwall, B.; Ideguchi, E.; Kerek, A.; Klamra, W.; Marel, J. van der; Novak, D.; Norlin, L.-O.

2001-01-01

The scintillation response of BaF 2 and YAP:Ce to protons, α particles, 16 O and 28 Si ions in the 5-30 MeV range has been investigated. The ratio between the fast and slow parts of the scintillator signal for BaF 2 has been used to separate protons, α particles and heavier ions, and the dependence of this ratio on the particle energy has been studied. The time constants and intensities of the two components of the YAP:Ce signal were measured, as were the time constant and intensity of the weak component of the slow part of the BaF 2 signal. Furthermore, the dependence of the light yield on the particle energy has been investigated for both BaF 2 and YAP:Ce

Determination of the differences in oxidation potentials for the Pr3+/Pr2+ and Ce3+/Ce2+ pairs in halide melts

International Nuclear Information System (INIS)

Mikheev, N.B.; Auerman, L.N.; Rumer, I.A.; D'yachkova, R.A.

1983-01-01

Cocrystallization has been used with the (PrOCl)/sub s. ph/ - (PrCl 2 , PrCl 3 , SrCl 2 ) melt system to examine the dependence of the cerium(III) cocrystallization coefficient on the X/sub Pr 2+ /X/sub Pr 3+ / ratio in the melt. Measurement has been made in this way of the difference in oxidation potentials for the pairs Pr 3+ /Pr 2+ and Ce 3+ /Ce 2+ : ΔE/sub Pr 3+ /Pr 2+0 -E/sub Ce 3+ /Ce 2+ / 0 , which is 0.08 +/- 0.04 V for chloride

Optical spectroscopy and luminescence quenching of LuI3:Ce3+

International Nuclear Information System (INIS)

Birowosuto, M.D.; Dorenbos, P.; Haas, J.T.M. de; Eijk, C.W.E. van; Kraemer, K.W.; Guedel, H.U.

2006-01-01

Optical spectroscopy of LuI 3 doped with Ce 3+ using ultraviolet and visible light excitation is reported. LuI 3 host excitation and emission and 4f-5d excitation and emission of Ce 3+ are observed. An empirical model based on crystal field splitting was used to estimate the energy of the highest 4f-5d excitation band. The crystal field splitting and centroid shift were compared to those of LuCl 3 :Ce 3+ and LuBr 3 :Ce 3+ . Temperature dependence of X-ray excited luminescence spectra shows thermal quenching, whereas that of the decay curve of Ce 3+ emission excited at the lowest 5d band of Ce 3+ does not indicate the presence of quenching of Ce 3+ emission for temperature below 625K. The quenching in LuI 3 :Ce 3+ therefore occurs before the 5d Ce 3+ emission takes place

Luminescence and scintillation properties of LuPO4-Ce nanoparticles

International Nuclear Information System (INIS)

Vistovskyy, V.; Malyy, T.; Pushak, A.; Vas’kiv, A.; Shapoval, A.; Mitina, N.; Gektin, A.; Zaichenko, A.; Voloshinovskii, A.

2014-01-01

Study of the spectral-luminescence parameters of LuPO 4 -Ce nanoparticles upon the excitation by X-ray quanta and synchrotron radiation with photon energies of 4–25 eV was performed. Nanoparticles with mean size about a=35 nm and nanoparticles with size less than 12 nm reveal the different structures of cerium centers. Luminescence efficiency of LuPO 4 -Ce nanoparticles of a 4 -Ce nanoparticles studied using synchrotron and X-ray excitation. • Different structure of Ce 3+ -centers has been revealed for LuPO 4 -Ce nanoparticles. • Luminescence of LuPO 4 -Ce with size less than 12 nm is strongly quenched upon the X-ray excitation

The highest spin discrete levels in 131,132Ce

International Nuclear Information System (INIS)

Paul, E S; Choy, P T W; Andreoiu, C; Boston, A J; Evans, A O; Fox, C; Gros, S; Nolan, P J; Rainovski, G; Sampson, J A; Scraggs, H C; Walker, A; Appelbe, D E; Joss, D T; Simpson, J; Gizon, J; Astier, A; Buforn, N; Prevost, A; Redon, N; Stezowski, O; Nyako, B M; Sohler, D; Timar, J; Zolnai, L; Bazzacco, D; Lunardi, S; Petrache, C M; Bednarczyk, P; Curien, D; Kintz, N; Ragnarsson, I

2006-01-01

The three superdeformed (SD) bands in 132 Ce and the two SD bands in 131 Ce have been extended to higher spin following experiments with the EUROBALL IV spectrometer. The two SD bands in 131 Ce have been linked together. However, despite the relatively high population intensity of the bands (up to 5% of the respective channel), it has not been possible to unambiguously link any of the five SD bands into the low-spin, normally deformed structures of 131,132 Ce

Using Ce to modify inclusion in spring steel

Directory of Open Access Journals (Sweden)

Wang Q.

2017-01-01

Full Text Available The effect of rare earth metals addition on the Al2O3 inclusions in spring steel used in fastener of high speed railway was investigated by metallographic examination, SEM-EDS and composition analysis. To deform those harmful inclusions to improve material performance，the evolution process of Al2O3 inclusions was investigated through the surface and line scanning. Ce metal modifying Al2O3 is a stepwise reduction process based on a formation of ring shape Ce-riched band around the Al2O3 inclusions during reaction process. Through experiment and thermodynamic calculation, an evolvement rule about Al2O3 inclusions change after Ce addition is obtained, i.e. Al2O3→Ce2O3-Al2O3→Ce2O2S. Changing the inclusions from Al2O3 to rare earth inclusions could improve the resistance to pitting corrosion based on potentiodynamic anodic polarization test.

Room temperature ferromagnetism in Fe-doped CeO2 nanoparticles.

Science.gov (United States)

Maensiri, Santi; Phokha, Sumalin; Laokul, Paveena; Seraphin, Supapan

2009-11-01

RT ferromagnetism was observed in nanoparticles of Fe-doped CeO2 (i.e., Ce(0.97)Fe(0.03)O2) synthesized by a sol-gel method. The undoped and Fe-doped CeO2 were characterized by XRD, Raman spectroscopy, TEM, and VSM. The undoped samples and Ce(0.97)Fe(0.03)O2 precursor exhibit a diamagnetic behavior. The 673 K-calcined Ce(0.97)Fe(0.03)O2 sample is paramagnetic whereas 773 and 873 K-calcined Ce(0.97)Fe(0.03)O2 samples are ferromagnetism having the magnetizations of 4.65 x 10(-3) emu/g and 6.20 x 10(-3) emu/g at 10 kOe, respectively. Our results indicate that the ferromagnetic property is intrinsic to the Fe-doped CeO2 system and is not a result of any secondary magnetic phase or cluster formation.

Synthesis and luminescence of CePO4 and CePO4:Tb hollow and core-shell microspheres composed of single-crystal nanorods

International Nuclear Information System (INIS)

Guan Mingyun; Sun Jianhua; Han Min; Xu Zheng; Tao Feifei; Yin Gui; Wei Xianwen; Zhu Jianmin; Jiang Xiqun

2007-01-01

Lanthanide phosphate microspheres composed of single-crystal CePO 4 and CePO 4 :Tb nanorods were successfully synthesized, respectively, using the functionalized composite aggregate as a template, which is composed of P123, H 6 P 4 O 13 and Ce 3+ , and also as a resource of reaction species with high chemical potential. The shape and the phase structure of the CePO 4 nanocrystal can be easily controlled via adjusting reaction temperature, monomer concentration and annealing temperature. SEM images show the spherical superstructure composed of nanorods. HRTEM and SAED images reveal the single-crystalline nature of nanorod and TEM images show the hollow interiors of the superstructure. XRD patterns indicate that the crystal structure of the nanorods is hexagonal before and monoclinic after annealing. The formation mechanism was proposed. Strong UV and green luminescence were observed for the CePO 4 and CePO 4 :Tb microspheres, respectively. The synthesis method can be extended to the fabrication of NRHS and core-shell microspheres of other rare-earth or doped LnPO 4 materials for wide applications

Electrochemical characterization of Pt-CeO{sub 2}/C and Pt-Ce{sub x}Zr{sub 1-x}O{sub 2}/C catalysts for ethanol electro-oxidation

Energy Technology Data Exchange (ETDEWEB)

Bai, Yuxia; Qiu, Xinping; Xi, Jingyu; Wang, Jianshe; Li, Jinfeng; Zhu, Wentao; Chen, Liquan [Key Laboratory of Organic Optoelectronics and Molecular Engineering, Department of Chemistry, Tsinghua University, Beijing 100084 (China); Wu, Jianjun [Key Laboratory of Organic Optoelectronics and Molecular Engineering, Department of Chemistry, Tsinghua University, Beijing 100084 (China); Department of Chemistry, Shijiazhuang College, Shijiazhuang 050801 (China)

2007-04-24

Pt-CeO{sub 2}/C and a series of Pt-Ce{sub x}Zr{sub 1-x}O{sub 2}/C catalyst powders with different Ce/Zr ratio were prepared and evaluated in terms of the electrochemical activity for ethanol electro-oxidation using cyclic voltammetry (CV), steady state polarization experiments and CO-stripping technique at room temperature. XRD results show that Ce{sub x}Zr{sub 1-x}O{sub 2} and Pt coexist in the Pt-Ce{sub x}Zr{sub 1-x}O{sub 2}/C catalyst and Ce{sub x}Zr{sub 1-x}O{sub 2} has no effect on the crystalline lattice of Pt. TEM results show that the Pt and Ce{sub x}Zr{sub 1-x}O{sub 2} particles dispersed uniformly over the surface of the carbon black. Cyclic voltammetry results show that the mass activity and specific activity of Pt-CeO{sub 2}/C for ethanol electro-oxidation is higher than that of Pt/C. The structure and Ce/Zr ratio of Pt-Ce{sub x}Zr{sub 1-x}O{sub 2}/C has effect on the catalytic activity of catalysts. CO-stripping voltammetry showed that the inclusion of CeO{sub 2} and Ce{sub x}Zr{sub 1-x}O{sub 2} favors the CO oxidation at lower potential. (author)

Tetragonal Ce-based Ce-Sm(Fe, Co, Ti){sub 12} alloys for permanent magnets

Energy Technology Data Exchange (ETDEWEB)

Martin-Cid, Andres; Salazar, Daniel [BCMaterials, Bizkaia Science and Tecnology Park, 48160 Derio (Spain); Gabay, Aleksandr M.; Hadjipanayis, George C. [Department of Physics and Astronomy, University of Delaware, Newark, DE, 19716 (United States); Barandiaran, Jose Manuel [BCMaterials, Bizkaia Science and Tecnology Park, 48160 Derio (Spain); Department of Electricity and Electronics, University Basque Country (UPV/EHU), 48080 Bilbao (Spain)

2016-12-15

Abundance and relatively low cost of Ce provide a great incentive for its use in rare-earth permanent magnets. It has been recently reported that the tetragonal Ce(Fe,Co,Ti)12 compounds may exhibit application-worthy intrinsic magnetic properties. In this work the effect of the α-Fe phase formation due to the evaporation of Sm during alloy fabrication has been studied, as a previous step in the attempt to convert the intrinsic magnetic properties into functional properties of a permanent magnet. Ce{sub 0.5}Sm{sub 0.5}Fe{sub 9}Co{sub 2}Ti alloys based on the ThMn12-type crystal structure have been synthesized via melt-spinning with different Sm content. Coercive fields between 2.8 and 1.4 kOe have been found for α-Fe phase contents between 8 and 46% in volume, showing the influence of the α-Fe phase on the coercivity and exchange coupling between the hard and soft phase. (copyright 2016 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Satellite line mapping in Eu3+–Ce3+ and Pr3+–Ce3+ codoped Y2SiO5

International Nuclear Information System (INIS)

Serrano, D.; Karlsson, J.; Zheng, L.; Dong, Y.; Ferrier, A.; Goldner, P.; Walther, A.; Rippe, L.; Kröll, S.

2016-01-01

In this work we perform a high-resolution spectroscopic investigation of Eu 3+ –Ce 3+ and Pr 3+ –Ce 3+ codoped Y 2 SiO 5 crystals. Satellite line spectra were recorded at low temperatures around the Eu 3+ : 7 F 0 → 5 D 0 and the Pr 3+ : 3 H 4 → 1 D 2 transitions. It is observed that the incorporation of Ce 3+ as a codopant notably changes the Eu 3+ and Pr 3+ satellite line patterns. Satellite lines measured in singly doped Eu 3+ :Y 2 SiO 5 were found at the same spectral positions in Eu 3+ –Ce 3+ codoped crystals. These coincident lines were concluded to be due to pairs of Eu 3+ ions. Extra satellite lines appeared in the codoped crystals, which were assigned to Ce 3+ related structures such as Ce 3+ –Eu 3+ pairs. The analysis of the Pr 3+ satellite line spectra presents further challenges. Satellite lines associated to Pr 3+ pairs show weaker intensity, presumably due to the efficient quenching of the Pr 3+1 D 2 emission through cross-relaxation paths ( 1 D 2 → 1 G 4 ; 3 H 4 → 3 F 4 ). The investigation of the Eu 3+ and Pr 3+ satellite line patterns in Y 2 SiO 5 is particularly interesting for their exploitation in rare-earth based quantum computation schemes. - Highlights: • We recorded Eu and Pr satellite lines in Y 2 SiO 5 with and without Ce as a codopant. • The presence of Ce leads to the appearance of extra satellite lines in the spectra. • The satellite lines are associated to minor crystal sites such as ion pairs. • Less than 100 ion pairs were detected per satellite line. • The exploitation of the satellite line structure is proposed for quantum computing.

Method for removing trace contaminants from multicurie amounts of 144Ce

International Nuclear Information System (INIS)

Wagner, J.A.; Kanapilly, G.M.

1976-01-01

Removal of contaminants from stock solutions of 144 Ce(III) was required for large quantities of 144 Ce prior to incorporation into fused aluminosilicate particles for inhalation toxicology studies. Since available procedures for purification of 144 Ce could not be readily adapted to our laboratory conditions and requirements, a simple procedure was developed to purify 144 Ce in multicurie quantities of 144 Ce(III). This procedure consists of separation of 144 Ce from contaminants by precipitation and filtrations at different pH. Its simplicity and efficacy in providing a stock solution that would readily exchange into montmorillonite clay was demonstrated when it was used during the preparation of large amounts of 144 Ce in fused aluminosilicate particles

Sonocatalytic degradation of diclofenac with FeCeOx particles in water.

Science.gov (United States)

Chong, Shan; Zhang, Guangming; Wei, Zhongheng; Zhang, Nan; Huang, Ting; Liu, Yucan

2017-01-01

This paper studies the sonocatalytic degradation of diclofenac in water using FeCeO x -catalyzed ultrasound. The effects of pre-adsorption and gas addition were investigated. Nitrogen adsorption/desorption, SEM, XRD, Raman and XPS analyses of FeCeO x before and after sonication were characterized. The proposed mechanism was based on the microstructure changes of FeCeO x and reactive-species-scavenging performances. The results show that FeCeO x has excellent performance in catalyzing an ultrasonic system in water, and 80% of diclofenac was removed in 30min ([Diclofenac]=20mg/L, FeCeO x amount=0.5g/L, pH=6, ultrasonic density=3.0W/cm 3 , ultrasonic frequency=20kHz, temperature=298K). The Fe, Ce, and O elements remained highly dispersed in the structure of FeCeO x , and the solid solution structure of FeCeO x remained stable after the reaction. Ce (III) was gradually oxidized to Ce (IV) and Fe (III) was gradually reduced to Fe (II) after the reaction, which indicates that Fe and Ce ions with different valences coexisted in dynamic equilibrium. The amount of oxygen vacancies in FeCeO x significantly decreased after the reaction, which indicates that oxygen vacancy participated in the ultrasonic process. Singlet oxygen 1 O 2 was the primary reactive species in the degradation process, and the hydroxyl radicals OH and superoxide radical anion O 2 - also participated in the reaction. FeCeO x had excellent chemical stability with negligible leaching ions in the ultrasonic process. Copyright © 2016 Elsevier B.V. All rights reserved.

Core-level XPS studies of Ce and La intermetallic compounds and their implications for the 4f levels of Ce compounds

International Nuclear Information System (INIS)

Freiburg, C.; Fuggle, J.C.; Hillebrecht, F.U.; Zolnierek, Z.; Laesser, R.

1983-01-01

The 3d core hole X-ray photoelectron spectra (XPS) of approximately 30 intermetallic compounds of La and Ce are reported. Transitions to final states with approximately f 0 , f 1 and f 2 character are observed in some Ce compounds (f 0 and f 1 for La compounds). The results are discussed in terms of the current ideas of the influence of f-counts and f-levels hybridization on core level lineshapes. We cannot find an explanatoin of the observed spectra consisted with the ''promotial model'' where the 4f-count varies and 4f electron was thought to be entirely promoted to the Ce 5d6s valence bands in some compounds. There may be some small charge transfer from the f level, however. In conjunction with ideas on screening processes in XPS the observed lineshapes suggest coupling of the 4f electrons to other states is strongest in those compounds previously thought to have f 0 character. This coupling increases despite a large increase in the Ce-Ce distance when Ce is diluted with Ni or Pd. Thus it cannot be due to direct f-f interaction and must be attributed to coupling with the other valence electrons; possibly those centred on the partner sites. (orig./EZ) [de

The role of calcification for staging cystic echinococcosis (CE)

Energy Technology Data Exchange (ETDEWEB)

Hosch, Waldemar; Kauffmann, Guenter W. [University Hospital Heidelberg, Department of Radiology, Heidelberg (Germany); Stojkovic, Marija; Junghanss, Thomas [University Hospital of Heidelberg, Section of Clinical Tropical Medicine, Heidelberg (Germany); Jaenisch, Thomas [University Hospital of Heidelberg, Section of Clinical Tropical Medicine, Heidelberg (Germany); University Hospital of Heidelberg, Section of Biostatistics and Epidemiology, Heidelberg (Germany)

2007-10-15

The prevalence of calcified cysts and the significance of calcification as a sign of cyst inactivity in cystic echinococcosis (CE) was evaluated. Seventy-eight patients (36 females, 42 males, mean age 40.8 {+-} 16.9 years) with CE, having a total of 137 abdominal cysts (116 hepatic, three splenic, one renal and 17 peritoneal cysts), were diagnosed and followed-up by ultrasound during and after albendazole treatment or as part of the watch-and-wait approach recording changes in the cyst wall and content. In 48 patients with 94 cysts, computed tomography (CT) imaging was additionally available and was correlated with ultrasound findings. Cyst wall calcification was classified into (1) ''sprinkled'', (2) ''eggshell-like'', and (3) ''circular''. Calcification of the cyst wall and/or cyst content was detected in 67 echinococcal cysts (48.9% of all cysts) in 39 patients (15 females, 24 males, mean age 40.8 {+-} 14.8 years). Of the total of 67 calcified cysts, only 23 were compatible with WHO type CE5, 18 with WHO type CE4. Judged by cyst content, the remaining 26 were of WHO type CE1, CE2 and CE3 (n = 1, n = 8, and n = 17, respectively). During a mean period of 34.3 months ({+-}21.3 months) the majority of cysts (n = 32) did not exhibit any change in cyst content and wall properties. Fourteen cysts showed signs of progressive involution, five cysts (all of WHO type CE3) of renewed activity defined by recurring fluid collection. In 16 cysts, no follow-up was available due to surgery or drop out. Calcification of the cyst is not restricted to the inactive WHO cyst types CE4 and CE5, but occurs in all stages and in up to 50% of cysts. The completeness and, most importantly, the stability of consolidation of cyst content over time predicts cyst inactivity more reliably. (orig.)

Metal distribution in sediment cores from Sao Paulo State Coast, Brazil

International Nuclear Information System (INIS)

Silva, Paulo S.C.; Damatto, Sandra R.; Maldonado, Caio; Favaro, Deborah I.T.; Mazzilli, Barbara P.

2011-01-01

Highlights: → Sediment core study in the total fraction. → Elementary composition of sediment for dredged sediment regulation. → Multivariate analysis for determination of basal level of sediment composition. → Importance of the determination of local reference values for sediment studies. - Abstract: Ten sediment core samples with lengths ranging from 35 to 100 cm were collected in the Baixada Santista region and analyzed to determine As, Br, Co, Cr, Cs, Fe, Rb, Sb, Ta, Th, U, Zn and rare earths (Sc, Ce, Eu, La, Lu, Nd, Sm, Tb and Yb) level concentrations using instrumental neutron activation analysis (INAA). The studied region is located in the southeastern coast of Sao Paulo State and is comprised of a densely urbanized area, the largest industrial complex of the country, with a predominance of petrochemical and fertilizer plants. It is also home to Brazil's most important and busiest port. The conclusions found that the As, La, Sm, Ne, Ce, Eu, Hf, Ta, Th, and U elements have a high background level in the region and that Fe and Zn were the main indicators of anthropogenic contribution in the sediments.

A Política Externa Independente em ação: a Conferência de Punta del Este de 1962 Independent Foreign Politics in action: an Overview of the Punta del Este Convention in 1962

Directory of Open Access Journals (Sweden)

Hélio Franchini Neto

2005-12-01

Full Text Available Considerada por San Tiago Dantas como "uma reunião que marcou época na formação do americanismo", a Conferência de Punta del Este, de janeiro de 1962, dedicou-se a tratar dos efeitos da Revolução Cubana no hemisfério. Declarou-se a incompatibilidade do comunismo com os princípios americanos e suspendeu-se Cuba da Junta Interamericana de Defesa (JID e da OEA. A participação brasileira teve grande destaque e repercussão tanto interna quanto internacionalmente. Procura-se analisar as razões que levaram o Brasil a adotar a posição de condenar o comunismo cubano e aprovar a suspensão de Cuba da JID, sem, porém, concordar com sua suspensão da OEA.Considered by San Tiago Dantas as "a landmark meeting for the formation of Americanism", the Conference of Punta del Este of January 1962 dealt with the effects of the Cuban Revolution on the Hemisphere. A resolution was approved declaring the incompatibility of communism with American principles, suspended Cuba from the Inter-American Defense Board (IDB and from the Organization of American States (OAS. The Brazilian participation gained high distinction and had repercussions not only domestically but also internationally. The present work seeks to analyse the reasons that led Brazil to condemn communism in Cuba and approve the suspension of this country from the IDB, without, however, agreeing to the suspension of Cuba from the OAS.

CE-MS fingerprinting of Laurencia complex algae (Rhodophyta).

Science.gov (United States)

Machín-Sánchez, María; Asensio-Ramos, María; Hernández-Borges, Javier; Gil-Rodríguez, María Candelaria

2014-03-01

The use of CE-ESI-MS has been considered as a new chemical strategy for the possible discernment of genera and species of the Laurencia complex. After the selection of the CE-MS and the extraction conditions, a total of 28 specimens of the complex, including different species of four genera (Laurencia, Laurenciella, Palisada, and Osmundea) collected from five intertidal locations on the Island of Tenerife (Canary Islands, Spain) were analyzed. CE-MS fingerprints revealed that CE-MS can be used as a useful tool for these studies in order to assess similarities and differences between them and that it constitutes an important starting point for further studies in the field. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

The equiatomic intermetallics REPtCd (RE = La, Ce, Pr, Nd, Eu) and magnetic properties of CeAuCd

Energy Technology Data Exchange (ETDEWEB)

Johnscher, Michael; Niehaus, Oliver; Poettgen, Rainer [Muenster Univ. (Germany). Inst. fuer Anorganische und Analytische Chemie; Tappe, Frank [Hochschule Hamm-Lippstadt, Hamm (Germany)

2015-06-01

The cadmium intermetallics REPtCd (RE = La, Ce, Pr, Nd, Eu) and CeAuCd were synthesized by induction-melting of the elements in sealed niobium ampoules followed by annealing in muffle furnaces. The samples were characterized by powder X-ray diffraction. The structures of CePtCd (ZrNiAl type, P anti 62m, a = 763.8(6), c = 409.1(4) pm, wR2 = 0.0195, 298 F{sup 2} values, 14 variables) and EuPtCd (TiNiSi type, Pnma, a = 741.3(2), b = 436.4(1), c = 858.0(4) pm, wR2 = 0.0385, 440 F{sup 2} values, 20 variables) were refined from single-crystal data. The REPtCd structures exhibit three-dimensional networks of corner- and edge-sharing Cd rate at Pt{sub 2/6}Pt{sub 2/3} and Cd rate at Pt{sub 4/4} tetrahedra, which leave cages for the rare earth atoms. Temperature-dependent magnetic susceptibility data of CeAuCd reveal a paramagnetic to antiferromagnetic phase transition at T{sub N} = 3.7(5) K.

The equiatomic intermetallics REPtCd (RE = La, Ce, Pr, Nd, Eu) and magnetic properties of CeAuCd

International Nuclear Information System (INIS)

Johnscher, Michael; Niehaus, Oliver; Poettgen, Rainer

2015-01-01

The cadmium intermetallics REPtCd (RE = La, Ce, Pr, Nd, Eu) and CeAuCd were synthesized by induction-melting of the elements in sealed niobium ampoules followed by annealing in muffle furnaces. The samples were characterized by powder X-ray diffraction. The structures of CePtCd (ZrNiAl type, P anti 62m, a = 763.8(6), c = 409.1(4) pm, wR2 = 0.0195, 298 F 2 values, 14 variables) and EuPtCd (TiNiSi type, Pnma, a = 741.3(2), b = 436.4(1), c = 858.0(4) pm, wR2 = 0.0385, 440 F 2 values, 20 variables) were refined from single-crystal data. The REPtCd structures exhibit three-dimensional networks of corner- and edge-sharing Cd rate at Pt 2/6 Pt 2/3 and Cd rate at Pt 4/4 tetrahedra, which leave cages for the rare earth atoms. Temperature-dependent magnetic susceptibility data of CeAuCd reveal a paramagnetic to antiferromagnetic phase transition at T N = 3.7(5) K.

Sr2CeO4: Electronic and structural properties

International Nuclear Information System (INIS)

Rocha, Leonardo A.; Schiavon, Marco A.; Nascimento, Clebio S.; Guimarães, Luciana; Góes, Márcio S.; Pires, Ana M.; Paiva-Santos, Carlos O.

2014-01-01

Highlights: • Sr 2 CeO 4 it was obtained from the heat treatment of Ce 3+ -doped strontium oxalate. • Rietveld analysis made it possible to obtain information about crystalline structure. • Experimental band gap value was compared with theoretical obtained by Sparkle/PM7. • The materials obtained shows intense photoluminescence and scintillator properties. - Abstract: This work presents on the preparation and photoluminescent properties of Sr 2 CeO 4 obtained from the heat treatment of Ce(III)-doped strontium oxalate (10, 25 and 33 mol%). The oxalate precursors were heat treated at 1100 °C for 12 h. The structure of this photoluminescent material was evaluated by the Rietveld method. The route used in this work to prepare the materials showed to be viable when compared to other synthesis reported in the literature. The Sr 2 CeO 4 material showed a broad and intense band emission with a maximum around 485 nm. The quantitative phase analysis showed that the Sr 2 CeO 4 photoluminescent phase is the majority one compared to the impurity phases of SrCeO 3 and SrCO 3 . From all results it was possible to verify a complete elimination of the CeO 2 phase for the sample obtained from the heat treatment of oxalate precursor containing 33 mol% of cerium(III). The material showed excellent properties for possible candidate as scintillator materials, and in the improvement of efficiency of solar cells when excited in the UV–vis region. The CIE chromaticity diagram it is also reported in this work

Preparation and characterization of Ce-doped HfO2 nanoparticles

International Nuclear Information System (INIS)

Gálvez-Barboza, S.; González, L.A.; Puente-Urbina, B.A.; Saucedo-Salazar, E.M.; García-Cerda, L.A.

2015-01-01

Highlights: • Ce-doped HfO 2 nanoparticles were prepared by a modified solgel method. • Ce-doped HfO 2 nanoparticles have a semispherical shape with sizes between 6 and 11.5 nm. • The samples doped with 10% in weight of Ce directly crystallized in a cubic structure. • A quick, straightforward and effective route for the preparation of Ce-doped nanoparticles. - Abstract: A modified solgel method to synthesize Ce-doped HfO 2 nanoparticles was carried out using a precursor material prepared with cerium nitrate, hafnium chloride, citric acid and ethylene glycol. The obtained precursor material was calcined at 500 and 700 °C for 2 h in air. The influence of the concentration of Ce and the calcination temperature was studied to observe the structural and morphological changes of the obtained materials. For the characterization, X-ray diffraction (XRD), transmission electron microscopy (TEM) and Raman scattering (RS) were employed. The XRD patterns shown that the Ce-doped HfO 2 undergoes a structural transformation from monoclinic to cubic phase, which is significantly dependent on the Ce content and calcination temperature. TEM images have also confirmed the existence of semispherical nanoparticles with sizes between 6 and 11.5 nm

Physical, biochemical and genetic characterization of enterocin CE5-1 produced by Enterococcus faecium CE5-1 isolated from Thai indigenous chicken intestinal tract

OpenAIRE

Kraiyot Saelim; Sireewan Kaewsuwan; Akio Tani; Suppasil Maneerat

2015-01-01

Enterocin CE5-1 produced by Enterococcus faecium CE5-1 isolated from the chicken gastrointestinal tract was active in the wide range of pH 2-10 and temperature 30-100°C and sensitive to proteolytic enzymes and -amylase. It remained active after storage at -20°C for 2 months. Moreover, enterocin CE5-1 showed antibacterial activity against lactobacilli, bacilli, listeria, staphylococci and enterococci, especially antibiotic-resistant enterococci. In vitro study of enterocin CE5-1 decr...

The formation of intermetallic compounds during interdiffusion of Mg–Al/Mg–Ce diffusion couples

International Nuclear Information System (INIS)

Dai, Jiahong; Jiang, Bin; Li, Xin; Yang, Qingshan; Dong, Hanwu; Xia, Xiangsheng; Pan, Fusheng

2015-01-01

Graphical abstract: Al–Ce intermetallic compounds (IMCs) formed in Mg–Al/Mg–Ce diffusion couples. During the whole diffusion process, Al was the dominant diffusing species, and it substituted for Mg atoms of the Mg–Ce substrate. Five Al–Ce IMCs of Al 4 Ce, Al 11 Ce 3 , Al 3 Ce, Al 2 Ce, and AlCe were formed via the reaction of Al and Ce. - Highlights: • Al–Ce IMCs formation in the Mg–Al/Mg–Ce diffusion couples was studied. • Formation of Al 4 Ce as the first phase was rationalized using the Gibbs free energy. • The activation energy for the growth of the diffusion reaction zones was 36.6 kJ/mol. - Abstract: The formation of Al–Ce intermetallic compounds (IMCs) during interdiffusion of Mg–Al/Mg–Ce diffusion couples prepared by solid–liquid contact method was investigated at 623 K, 648 K and 673 K for 24 h, 48 h and 72 h, respectively. During the whole diffusion process, Al was the dominant diffusing species, and it substituted for Mg of the Mg–Ce substrate. Five Al–Ce IMCs of Al 4 Ce, Al 11 Ce 3 , Al 3 Ce, Al 2 Ce and AlCe were formed via the reaction of Al and Ce. The formation of Al 4 Ce as the first kind of IMC was rationalized on the basis of an effective Gibbs free energy model. The activation energy for the growth of the total diffusion reaction layer was 36.6 kJ/mol

Experimental investigation and thermodynamic calculation of the Zn–Fe–Ce system

Energy Technology Data Exchange (ETDEWEB)

Lu, Longfei; Wu, Changjun [Jiangsu Key Laboratory of Materials Surface Science and Technology, Changzhou University, Jiangsu 213164 (China); Jiangsu Collaborative Innovation Center of Photovolatic Science and Engineering, Changzhou University, Jiangsu 213164 (China); Wang, Jianhua, E-mail: wangjh@cczu.edu.cn [Jiangsu Key Laboratory of Materials Surface Science and Technology, Changzhou University, Jiangsu 213164 (China); Jiangsu Collaborative Innovation Center of Photovolatic Science and Engineering, Changzhou University, Jiangsu 213164 (China); Liu, Ya; Tu, Hao; Su, Xuping [Jiangsu Key Laboratory of Materials Surface Science and Technology, Changzhou University, Jiangsu 213164 (China); Jiangsu Collaborative Innovation Center of Photovolatic Science and Engineering, Changzhou University, Jiangsu 213164 (China)

2015-11-05

The 450 °C and 600 °C isothermal sections of the Zn–Fe–Ce system were investigated using equilibrated alloys and diffusion couples. The samples were analyzed by Scanning Electron Microscopy equipped with Energy Dispersive X-ray Spectrometer analysis and X-ray power diffraction. 15 and 13 three-phase regions were identified to exist at 450 °C and 600 °C, respectively. No ternary compound was found. Ce can not dissolve into all the Zn–Fe binary compounds and the solubilities of Fe in all the Zn–Ce binary phases were limited. All the Zn–Fe compounds can equilibrate with CeZn{sub 11} and all the Ce–Zn compounds (except CeZn) can equilibrate with α-Fe. Furthermore, thermodynamic extrapolation of the Zn–Fe–Ce system was carried out and showed good agreement well with detected phase relationships. - Highlights: • 450 °C and 600 °C sections of the Zn–Fe–Ce system were constructed. • No ternary compound exists. • Ce can not dissolve into all the Zn–Fe compounds. • All the Fe–Zn compounds can equilibrate with CeZn{sub 11}. • Thermodynamic extrapolation results agree with experimental data.

Mechanochemical and combustion synthesis of CeB{sub 6}

Energy Technology Data Exchange (ETDEWEB)

Akguen, Baris [Roketsan Missiles Inc., Ankara (Turkey); Sevinc, Naci; Topkaya, Yavuz [Middle East Technical Univ., Ankara (Turkey). Dept. of Metallurgical and Materials Engineerung; Camurlu, H. Erdem [Akdeniz Univ., Antalya (Turkey). Dept. of Mechanical Engineering

2013-04-15

CeB{sub 6} powder was prepared via combustion synthesis (CS) and mechanochemical processing (MCP) methods starting from CeO{sub 2}, B{sub 2}O{sub 3} and Mg powder mixtures. In CS, reactant mixtures were ignited in a preheated pot furnace under argon atmosphere. Products contained CeB{sub 6}, MgO and Mg{sub 3}B{sub 2}O{sub 6}, as revealed by X-ray diffraction analysis. After leaching in 1 M HCl for 15h, MgO was removed but Mg{sub 3}B{sub 2}O{sub 6} could not be removed from the products. Ball milling of products in ethanol prior to leaching made the removal of Mg{sub 3}B{sub 2}O{sub 6} possible by leaching. Yield of CeB{sub 6} was 68.6% in CS. MCP was performed in a stainless steel vial with a planetary ball mill at 300 rpm for 30h. MCP products contained CeB{sub 6}, MgO and small amount of Fe. Leaching in 1 M HCl for 30min was sufficient to remove MgO. Yield of CeB{sub 6} was 84.4% in MCP. According to scanning electron microscopy examinations, particles of CeB6 prepared by CS and MCP had submicrometer size. Average particle sizes were determined as 290nm and 240nm, respectively.

Adsorption process of fluoride from drinking water with magnetic core-shell Ce-Ti@Fe3O4 and Ce-Ti oxide nanoparticles.

Science.gov (United States)

Abo Markeb, Ahmad; Alonso, Amanda; Sánchez, Antoni; Font, Xavier

2017-11-15

Synthesized magnetic core-shell Ce-Ti@Fe 3 O 4 nanoparticles were tested, as an adsorbent, for fluoride removal and the adsorption studies were optimized. Adsorption capacity was compared with the synthesized Ce-Ti oxide nanoparticles. The adsorption equilibrium for the Ce-Ti@Fe 3 O 4 adsorbent was found to occur in cycles of adsorption-desorption. Although the nanoparticles suffer slight structure modifications after their reusability, they keep their adsorption capacity. Likewise, the efficiency of the Ce-Ti@Fe 3 O 4 was demonstrated when applied to real water to obtain a residual concentration of F - below the maximum contaminated level, 1.5mg/L (WHO, 2006). Copyright © 2017 Elsevier B.V. All rights reserved.

Photodynamic Processes in Fluoride Crystals Doped with Ce3+

Directory of Open Access Journals (Sweden)

Pavlov V.V.

2015-01-01

Full Text Available Integrated studies of photoelectric phenomena and their associated photodynamic processes in LiCaAlF6, LiLuF4, LiYF4, LiY0,5Lu0,5F4, SrAlF5 crystals doped with Ce3+ ions have been carried out using the combination of the methods of optical and dielectric spectroscopy. The numerical values of the basic parameters of photodynamic processes and their spectral dependence in 240 – 310 nm spectral range are evaluated. It has been shown that the most probable process, which leads to the photoionization of Ce3+ ions in LiYxLu1-xF4:Ce3+ (x=0; 0,5; 1 and LiCaAlF6:Ce3+ crystals, is excited-state absorption to the states of mixed configurations of Ce3+ ions localized near/in the conduction band of crystal.

Characterizations of electrodeposited Ni–CeO{sub 2} nanocomposite coatings

Energy Technology Data Exchange (ETDEWEB)

Kasturibai, S., E-mail: s.kasturibai@yahoo.co.in [Department of Chemistry, Alagappa Government Arts College, Karaikudi 630 003, Tamilnadu (India); Advanced Nanocomposite Coatings Laboratory, Department of Industrial Chemistry, School of Chemical Sciences, Alagappa University, Karaikudi 630 003, Tamilnadu (India); Kalaignan, G. Paruthimal, E-mail: pkalaignan@yahoo.com [Advanced Nanocomposite Coatings Laboratory, Department of Industrial Chemistry, School of Chemical Sciences, Alagappa University, Karaikudi 630 003, Tamilnadu (India)

2014-10-15

The expansion of current machinery requires metallic materials with better surface properties. In the present investigation, CeO{sub 2} reinforced nickel nanocomposite coatings were deposited on mild steel substrate by direct current electrodeposition process employing nickel acetate bath. The effect of incorporation of CeO{sub 2} particles in the Ni nanocomposite coatings on the micro hardness and corrosion behaviour has been evaluated. Smooth and compact nanocomposite deposits containing well-distributed cerium oxide particles were obtained. The crystallite structure was fcc for electrodeposited nickel and Ni–CeO{sub 2} nanocomposite coatings. It has been observed that, the presence of CeO{sub 2} nanoparticles favours the [111] and [200] texture of nickel matrix. The co-deposition of CeO{sub 2} nanoparticles with nickel was found to be favoured at applied current density of 8 A dm{sup −2}. The micro hardness values of the nickel nanocomposite coatings (725 HV) was higher than that of pure nickel (265 HV).The decrease in I{sub corr} values and increase in Constant Phase Element values were investigated in 3.5% NaCl solution which showed the higher corrosion resistant nature of Ni–CeO{sub 2} coatings. - Highlights: • Ni–CeO{sub 2} composite coatings have electrodeposited from eco-friendly acetate bath. • Inclusion of CeO{sub 2} in the composite coating has refined the crystallite size. • Micro hardness values have increased with CeO{sub 2} content in the composite coatings. • The negative shift of E{sub corr} confirming cathodic protective nature of coatings.

Information System through ANIS at CeSAM

Science.gov (United States)

Moreau, C.; Agneray, F.; Gimenez, S.

2015-09-01

ANIS (AstroNomical Information System) is a web generic tool developed at CeSAM to facilitate and standardize the implementation of astronomical data of various kinds through private and/or public dedicated Information Systems. The architecture of ANIS is composed of a database server which contains the project data, a web user interface template which provides high level services (search, extract and display imaging and spectroscopic data using a combination of criteria, an object list, a sql query module or a cone search interfaces), a framework composed of several packages, and a metadata database managed by a web administration entity. The process to implement a new ANIS instance at CeSAM is easy and fast : the scientific project has to submit data or a data secure access, the CeSAM team installs the new instance (web interface template and the metadata database), and the project administrator can configure the instance with the web ANIS-administration entity. Currently, the CeSAM offers through ANIS a web access to VO compliant Information Systems for different projects (HeDaM, HST-COSMOS, CFHTLS-ZPhots, ExoDAT,...).

Scintillation and optical stimulated luminescence of Ce-doped CaF2

International Nuclear Information System (INIS)

Yanagida, Takayuki; Fujimoto, Yutaka; Watanabe, Kenichi; Fukuda, Kentaro; Kawaguchi, Noriaki; Miyamoto, Yuka; Nanto, Hidehito

2014-01-01

Scintillation and optical stimulated luminescence of Ce 0.1–20% doped CaF 2 crystals prepared by Tokuyama Corp. were investigated. In X-ray induced scintillation spectra, luminescence due to Ce 3+ 5d–4f transition appeared around 320 nm with typically 40 ns decay time. By 241 Am 5.5 MeV α-ray irradiation, 0.1% doped one showed the highest scintillation light yield and the light yield monotonically decreased with Ce concentrations. Optically stimulated luminescence after X-ray irradiation was observed around 320 nm under 550 or 830 nm stimulation in all samples. As a result, intensities of optically stimulated luminescence were proportional to Ce concentrations. Consequently, scintillation and optically stimulated luminescence resulted to have a complementary relation in Ce-doped CaF 2 system. - Highlights: • Optical, scintillation, and OSL properties of Ce 0.1–20% doped CaF 2 were studied. • Scintillation light yield exhibited inverse proportionality to Ce concentrations. • OSL intensities showed proportionality to Ce concentrations. • Complementary relation of scintillation and OSL was experimentally confirmed

Raman spectroscopic studies on CeVO4 at high pressures

International Nuclear Information System (INIS)

Rao, Rekha; Garg, Alka B.; Wani, B.N.

2011-01-01

Raman scattering investigations of CeVO 4 at high pressures is reported. Polycrystalline CeVO 4 was prepared by solid state reaction of CeO 2 and V 2 O 5 . High pressure Raman spectroscopic measurements were carried out as per experimental details given

Contributing opportunistic resources to the grid with HTCondor-CE-Bosco

Science.gov (United States)

Weitzel, Derek; Bockelman, Brian

2017-10-01

The HTCondor-CE [1] is the primary Compute Element (CE) software for the Open Science Grid. While it offers many advantages for large sites, for smaller, WLCG Tier-3 sites or opportunistic clusters, it can be a difficult task to install, configure, and maintain the HTCondor-CE. Installing a CE typically involves understanding several pieces of software, installing hundreds of packages on a dedicated node, updating several configuration files, and implementing grid authentication mechanisms. On the other hand, accessing remote clusters from personal computers has been dramatically improved with Bosco: site admins only need to setup SSH public key authentication and appropriate accounts on a login host. In this paper, we take a new approach with the HTCondor-CE-Bosco, a CE which combines the flexibility and reliability of the HTCondor-CE with the easy-to-install Bosco. The administrators of the opportunistic resource are not required to install any software: only SSH access and a user account are required from the host site. The OSG can then run the grid-specific portions from a central location. This provides a new, more centralized, model for running grid services, which complements the traditional distributed model. We will show the architecture of a HTCondor-CE-Bosco enabled site, as well as feedback from multiple sites that have deployed it.

Anisotropic p-f mixing mechanism explaining anomalous magnetic properties in Ce monopnictides

International Nuclear Information System (INIS)

Takahashi, H.; Kasuya, T.

1985-01-01

An anomalously small crystal-field splitting in the paramagnetic region in CeSb and CeBi compared with those in CeP and CeAs is explained by the mixing mechanism between the occupied 4f states and the valence band holes. In the paramagnetic regions, the above p-f mixing gives the effective crystal-field splitting, which is estimated to nearly cancel the normal splittings extrapolated from CeP and CeAs in good agreement with experiment. The formula for the second-order transition temperature, at which the population ratio of the 4f GAMMA 8 states begins to be unbalanced, is also derived. In CeBi the second-order transition may occur, while in CeSb the first-order transition should occur in agreement with experiments. (author)

Performance evaluation of LaBr3: Ce scintillator

International Nuclear Information System (INIS)

Xie Ming; Lin Li; Liu Shihao; Xiao Peng; Xie Qingguo

2012-01-01

The cerium doped lanthanum bromide crystal (LaBr 3 : Ce) is a new kind of scintillator with many advantages such as good energy resolution, high light output, short decay time, good proportionality response. These properties make the LaBr 3 : Ce attractive substantial interest to use in the radiation detection. The energy resolution were investigated with Φ25 × 25 mm LaBr 3 : Ce coupled to a Hamamatsu R8900 photomultiplier tube. Energy resolution of 3.6% (FWHM) have been achieved for 511 keV photons ( 18 F source) at room temperature. Decay time constant of 20 ns have been acquired with a Hamamatsu fast-time-response R9800 photomultiplier tube. The results approve the excellent characterizations of LaBr 3 : Ce and imply its enormous potentiality in the radiation detectors of gamma-ray spectroscopy and PET. (authors)

VUV-UV–vis photoluminescence of Ce{sup 3+} and Ce{sup 3+}-Eu{sup 2+} energy transfer in Ba{sub 2}MgSi{sub 2}O{sub 7}

Energy Technology Data Exchange (ETDEWEB)

Yan, Jing; Liu, Chunmeng; Zhou, Weijie [MOE Key Laboratory of Bioinorganic and Synthetic Chemistry, KLGHEI of Environment and Energy Chemistry, School of Chemistry, Sun Yat-sen University, Guangzhou 510275 (China); Huang, Yan; Tao, Ye [Beijing Synchrotron Radiation Facility, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100039 (China); Liang, Hongbin, E-mail: cesbin@mail.sysu.edu.cn [MOE Key Laboratory of Bioinorganic and Synthetic Chemistry, KLGHEI of Environment and Energy Chemistry, School of Chemistry, Sun Yat-sen University, Guangzhou 510275 (China)

2017-05-15

A series of Ce{sup 3+} doped and Ce{sup 3+}-Eu{sup 2+} co-doped Ba{sub 2}MgSi{sub 2}O{sub 7} phosphors was prepared via a high-temperature solid-state reaction technique. The photoluminescence properties, which include synchrotron radiation VUV-UV excitation spectra, emission spectra and concentration effect, thermal stability of Ce{sup 3+} are investigated. Hence the energies of the crystal field split 5d excited states of Ce{sup 3+} are determined. Due to spectral overlap, the energy transfer from sensitizer Ce{sup 3+} to activator Eu{sup 2+} in Ba{sub 2}MgSi{sub 2}O{sub 7}:Ce{sup 3+}, Eu{sup 2+} occurs, and the mechanism is demonstrated to be an electric dipole−dipole interaction. - Highlights: •The energies of five crystal field split 5d states of Ce{sup 3+} in Ba{sub 2}MgSi{sub 2}O{sub 7} were determined by synchrotron radiation VUV-UV excitation spectrum. •The concentration effect, thermal stability of Ce{sup 3+} were investigated. •The energy transfer from Ce{sup 3+} to Eu{sup 2+} and its influence on luminescence decays of Ce{sup 3+} and Eu{sup 2+} were studied.

The γ rays sensitivity measurement of CeF3 scintillator detector

International Nuclear Information System (INIS)

Hu Mengchun; Zhou Dianzhong; Li Rurong; Wang Zhentong; Yang Hongqiong; Zhang Jianhua; Hu Qingyuan; Peng Taiping

2003-01-01

The CeF 3 is an abio-scintillator developed in recent years, which are insensitive to neutron and sensitive to gamma rays and respond quickness. The relationship of CeF 3 scintillation detector gamma rays sensitivity with the change of crystal thickness was measured. The CeF 3 scintillation detector is composed by high liner current photomultiplier tube of CHφT3, CHφT5 and CeF 3 scintillator. The detector gamma rays sensitivity of purple photocell and common photocell with CeF 3 scintillator were measured too

A Paleoautoecologia de Tijubina pontei Bonfim-Júnior &Marques, 1997 (Lepidosauria, Squamata Basal da Formação Santana, Aptiano da Bacia do Araripe Cretáceo Inferior do Nordeste do Brasil.

Directory of Open Access Journals (Sweden)

Francisco de Castro Bonfim-Júnior

2006-07-01

Full Text Available Tijubina pontei is a basal lizard found in the Crato Member, SantanaFormation, Lower Cretaceous (Aptian, Brazil. It is considered a sister group of Huehuecuetzpalli mixtetus, the only basal lizard previously known, found in Mexico. The paleoautoecology of T. pontei is compatible with a terrestrial animal, omnivorous, which could eventually occupy other ecological niches. Based on their dentition and ecomorphology, their behaviour could be a combination of active forager or a “sit-and-wait” one. It could even perform bipedal locomotion. Comparing T. pontei with Liolaemus lutzae, an extantbrazilian lizard, we find many characters and morphological similarities. This suggests that the L. lutzae habits could be extrapolated to the paleoenvironment of T. pontei which, probably, lived in a sandy habitat, with a vegetation that could support variations in salinity and high temperatures.

CE APPROVAL IN ELECTRICAL HOUSEHOLD APPLIANCES AND A CASE STUDY

Directory of Open Access Journals (Sweden)

Nazmi EKREN

2009-01-01

Full Text Available Due to the reason for rapidly developing technology, increasing competition medium, and awareness of the consumers, nowadays, the exigency of production with good quality has gained more and more significance. Certification of the quality and safety of the products to the consumers is compulsory in terms of producers. There are some documents to certify safety of the products. One of them is CE certificate. In this paper, basic information about CE mark is given and CE standards and tests required for electrical household appliances are mentioned. As an application, one of an electrical household appliance, toaster grill is treated and examined. To obtain CE certificate for toaster grill, required tests are made according to EN60335-2-9 and CE certificate is obtained.

Luminescence of Ce3+ doped LaPO4 nanophosphors upon Ce3+ 4f-5d and band-to-band excitation

International Nuclear Information System (INIS)

Stryganyuk, G.; Trots, D.M.; Voloshinovskii, A.; Shalapska, T.; Zakordonskiy, V.; Vistovskyy, V.; Pidzyrailo, M.; Zimmerer, G.

2008-01-01

Luminescence spectral-kinetic studies have been performed for pure and Ce-doped LaPO 4 micro- and nanosized phosphates using synchrotron radiation for the excitation within 5-20 eV energy range at T=8-300 K. Mechanisms for the excitation of Ce 3+ 5d-4f emission as well as the quenching processes are discussed. The influence of surface defects has been considered to modify considerably the luminescent properties of nanosized phosphors upon the excitation in the energy range of Ce 3+ 4f-5d transitions and LaPO 4 host absorption

HumanViCe: Host ceRNA network in virus infected cells in human

Directory of Open Access Journals (Sweden)

Suman eGhosal

2014-07-01

Full Text Available Host-virus interaction via host cellular components has been an important field of research in recent times. RNA interference mediated by short interfering RNAs and microRNAs (miRNA, is a widespread anti-viral defence strategy. Importantly, viruses also encode their own miRNAs. In recent times miRNAs were identified as key players in host-virus interaction. Furthermore, viruses were shown to exploit the host miRNA networks to suite their own need. The complex cross-talk between host and viral miRNAs and their cellular and viral targets forms the environment for viral pathogenesis. Apart from protein-coding mRNAs, non-coding RNAs may also be targeted by host or viral miRNAs in virus infected cells, and viruses can exploit the host miRNA mediated gene regulatory network via the competing endogenous RNA effect. A recent report showed that viral U-rich non-coding RNAs called HSUR, expressed in primate virus herpesvirus saimiri (HVS infected T cells, were able to bind to three host miRNAs, causing significant alteration in cellular level for one of the miRNAs. We have predicted protein coding and non protein-coding targets for viral and human miRNAs in virus infected cells. We identified viral miRNA targets within host non-coding RNA loci from AGO interacting regions in three different virus infected cells. Gene ontology (GO and pathway enrichment analysis of the genes comprising the ceRNA networks in the virus infected cells revealed enrichment of key cellular signalling pathways related to cell fate decisions and gene transcription, like Notch and Wnt signalling pathways, as well as pathways related to viral entry, replication and virulence. We identified a vast number of non-coding transcripts playing as potential ceRNAs to the immune response associated genes; e.g. APOBEC family genes, in some virus infected cells. All these information are compiled in HumanViCe, a comprehensive database that provides the potential ceRNA networks in virus

Pd/CeO2/SiC Chemical Sensors

Science.gov (United States)

Lu, Weijie; Collins, W. Eugene

2005-01-01

The incorporation of nanostructured interfacial layers of CeO2 has been proposed to enhance the performances of Pd/SiC Schottky diodes used to sense hydrogen and hydrocarbons at high temperatures. If successful, this development could prove beneficial in numerous applications in which there are requirements to sense hydrogen and hydrocarbons at high temperatures: examples include monitoring of exhaust gases from engines and detecting fires. Sensitivity and thermal stability are major considerations affecting the development of high-temperature chemical sensors. In the case of a metal/SiC Schottky diode for a number of metals, the SiC becomes more chemically active in the presence of the thin metal film on the SiC surface at high temperature. This increase in chemical reactivity causes changes in chemical composition and structure of the metal/SiC interface. The practical effect of the changes is to alter the electronic and other properties of the device in such a manner as to degrade its performance as a chemical sensor. To delay or prevent these changes, it is necessary to limit operation to a temperature sensor structures. The present proposal to incorporate interfacial CeO2 films is based partly on the observation that nanostructured materials in general have potentially useful electrical properties, including an ability to enhance the transfer of electrons. In particular, nanostructured CeO2, that is CeO2 with nanosized grains, has shown promise for incorporation into hightemperature electronic devices. Nanostructured CeO2 films can be formed on SiC and have been shown to exhibit high thermal stability on SiC, characterized by the ability to withstand temperatures somewhat greater than 700 C for limited times. The exchanges of oxygen between CeO2 and SiC prevent the formation of carbon and other chemical species that are unfavorable for operation of a SiC-based Schottky diode as a chemical sensor. Consequently, it is anticipated that in a Pd/CeO2/SiC Schottky

Study of the growth of CeO2 nanoparticles onto titanate nanotubes

Science.gov (United States)

Marques, Thalles M. F.; Ferreira, Odair P.; da Costa, Jose A. P.; Fujisawa, Kazunori; Terrones, Mauricio; Viana, Bartolomeu C.

2015-12-01

We report the study of the growth of CeO2 nanoparticles on the external walls and Ce4+ intercalation within the titanate nanotubes. The materials were fully characterized by multiple techniques, such as: Raman spectroscopy, infrared spectroscopy (FTIR), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). The ion exchange processes in the titanate nanotubes were carried out using different concentrations of Ce4+ in aqueous solution. Our results indicate that the growth of CeO2 nanoparticles grown mediated by the hydrolysis in the colloidal species of Ce and the attachment onto the titanate nanotubes happened and get it strongly anchored to the titanate nanotube surface by a simple electrostatic interaction between the nanoparticles and titanate nanotubes, which can explain the small size and even distribution of nanoparticles on titanate supports. It was demonstrated that it is possible to control the amount and size of CeO2 nanoparticles onto the nanotube surface, the species of the Ce ions intercalated between the layers of titanate nanotubes, and the materials could be tuned for using in specific catalysis in according with the amount of CeO2 nanoparticles, their oxygen vacancies/defects and the types of Ce species (Ce4+ or Ce3+) present into the nanotubes.

Luminescence from Ce in sol-gel SiO{sub 2}

Energy Technology Data Exchange (ETDEWEB)

Kroon, R.E., E-mail: KroonRE@ufs.ac.za [Department of Physics, University of the Free State, IB51, Box 339, Bloemfontein 9300 (South Africa); Seed Ahmed, H.A.A.; Ntwaeaborwa, O.M. [Department of Physics, University of the Free State, IB51, Box 339, Bloemfontein 9300 (South Africa); Koao, L.F. [Department of Physics, University of the Free State (Qwaqwa Campus), Private Bag X13, Phuthaditjhaba 9866 (South Africa); Nagpure, I.M.; Gusowski, M.A. [Department of Physics, University of the Free State, IB51, Box 339, Bloemfontein 9300 (South Africa); Botha, J.R. [Department of Physics, Nelson Mandela Metropolitan University, Box 77000, Port Elizabeth 6031 (South Africa); Swart, H.C. [Department of Physics, University of the Free State, IB51, Box 339, Bloemfontein 9300 (South Africa)

2012-05-15

The sol-gel process provides an attractive low temperature alternative to the melt process for producing Ce-doped silica, but reports of the emission wavelength have not been consistent. In this paper, luminescence measurements using a variety of excitation methods, including cathodoluminescence not yet reported by other researchers, are compared and evaluated in the light of previously published data. Several papers report luminescence around 350 nm but emission near this wavelength was not found from our samples. This luminescence originates from Ce that has not yet been incorporated in the silica and is found in samples that have not undergone high temperature annealing. Our photoluminescence results from samples annealed in a reducing atmosphere suggest that emission from Ce incorporated in the silica lattice occurs near 455 nm, and some indication of the emission from Ce in amorphous clusters at 400 nm is also found. However, our results also confirm earlier indications that intrinsic defects in silica can create photoluminescence near both these wavelengths, which can make identification of the luminescence due to Ce difficult. Finally, it has been found that samples which have been annealed in air, and therefore display poor photoluminescence because most of the Ce occurs in the tetravalent form, are luminescent under electron beam excitation. It is suggested that during cathodoluminescence measurements Ce{sup 4+} ions capture electrons to form excited Ce{sup 3+} ions from which the luminescence originates.

Complex impedance study on nano-CeO2 coating TiO2

International Nuclear Information System (INIS)

Zhang Mei; Wang Honglian; Wang Xidong; Li Wenchao

2006-01-01

Titanium dioxide (TiO 2 ) nanoparticles and cerium dioxide (CeO 2 ) nanoparticles coated titanium dioxide (TiO 2 ) nanoparticles (CeO 2 -TiO 2 nanoparticles) have been successfully synthesized by sol-gel method. The complex impedance of the materials was investigated. The grain resistance, boundary resistance and activation energy of the nanoparticles were calculated according to Arrhenius equation. According to calculating results, the active capacity of pure TiO 2 nanoparticles has been improved because of nano-CeO 2 coating. An optimal CeO 2 content of 4.9 mol% was achieved. The high resolution electron microscopy images of CeO 2 -TiO 2 nanoparticles showed that TiO 2 nanoparticles, as a core, were covered by CeO 2 nanoparticles. The average size of CeO 2 coating TiO 2 nanoparticles was about 70 nm. Scanning electron microscopy observation indicted that CeO 2 nanoparticle coating improved the separation, insulation, and stability the CeO 2 -TiO 2 nanoparticles, which was benefit to the activity of materials

Ce doped NiO nanoparticles as selective NO2 gas sensor

Science.gov (United States)

Gawali, Swati R.; Patil, Vithoba L.; Deonikar, Virendrakumar G.; Patil, Santosh S.; Patil, Deepak R.; Patil, Pramod S.; Pant, Jayashree

2018-03-01

Metal oxide gas sensors are promising portable gas detection devices because of their advantages such as low cost, easy production and compact size. The performance of such sensors is strongly dependent on material properties such as morphology, structure and doping. In the present study, we report the effect of cerium (Ce) doping on nickel oxide (NiO) nano-structured thin film sensors towards various gases. Bare NiO and Ce doped NiO nanoparticles (Ce:NiO) were synthesized by sol-gel method. To understand the effect of Ce doping in nickel oxide, various molar percentages of Ce with respect to nickel were incorporated. The structure, phase, morphology and band-gap energy of as-synthesized nanoparticles were studied by XRD, SEM, EDAX and UV-vis spectroscopy. Thin film gas sensors of all the samples were prepared and subjected to various gases such as LPG, NH3, CH3COCH3 and NO2. A systematic and comparative study reveals an enhanced gas sensing performance of Ce:NiO sensors towards NO2 gas. The maximum sensitivity for NO2 gas is around 0.719% per ppm at moderate operating temperature of 150 °C for 0.5% Ce:NiO thin film gas sensor. The enhanced gas sensing performance for Ce:NiO is attributed to the distortion of crystal lattice caused by doping of Ce into NiO.

Down-conversion luminescence from (Ce, Yb) co-doped oxygen-rich silicon oxides

International Nuclear Information System (INIS)

Heng, C. L.; Wang, T.; Su, W. Y.; Wu, H. C.; Yin, P. G.; Finstad, T. G.

2016-01-01

We have studied down-conversion photoluminescence (PL) from (Ce, Yb) co-doped “oxygen rich” silicon oxide films prepared by sputtering and annealing. The Ce"3"+ ∼510 nm PL is sensitive to the Ce concentration of the films and is much stronger for 3 at. % Ce than for 2 at. % Ce after annealing at 1200 °C. The PL emission and excitation spectroscopy results indicate that the excitation of Yb"3"+ is mainly through an energy transfer from Ce"3"+ to Yb"3"+, oxide defects also play a role in the excitation of Yb"3"+ after lower temperature (∼800 °C) annealing. The Ce"3"+ 510 nm photon excites mostly only one Yb"3"+ 980 nm photon. Temperature-dependent PL measurements suggest that the energy transfer from Ce"3"+ to Yb"3"+ is partly thermally activated.

A comparative study of LaBr3(Ce(3+)) and CeBr3 based gamma-ray spectrometers for planetary remote sensing applications.

Science.gov (United States)

Kozyrev, A; Mitrofanov, I; Owens, A; Quarati, F; Benkhoff, J; Bakhtin, B; Fedosov, F; Golovin, D; Litvak, M; Malakhov, A; Mokrousov, M; Nuzhdin, I; Sanin, A; Tretyakov, V; Vostrukhin, A; Timoshenko, G; Shvetsov, V; Granja, C; Slavicek, T; Pospisil, S

2016-08-01

The recent availability of large volume cerium bromide crystals raises the possibility of substantially improving gamma-ray spectrometer limiting flux sensitivities over current systems based on the lanthanum tri-halides, e.g., lanthanum bromide and lanthanum chloride, especially for remote sensing, low-level counting applications or any type of measurement characterized by poor signal to noise ratios. The Russian Space Research Institute has developed and manufactured a highly sensitive gamma-ray spectrometer for remote sensing observations of the planet Mercury from the Mercury Polar Orbiter (MPO), which forms part of ESA's BepiColombo mission. The Flight Model (FM) gamma-ray spectrometer is based on a 3-in. single crystal of LaBr3(Ce(3+)) produced in a separate crystal development programme specifically for this mission. During the spectrometers development, manufacturing, and qualification phases, large crystals of CeBr3 became available in a subsequent phase of the same crystal development programme. Consequently, the Flight Spare Model (FSM) gamma-ray spectrometer was retrofitted with a 3-in. CeBr3 crystal and qualified for space. Except for the crystals, the two systems are essentially identical. In this paper, we report on a comparative assessment of the two systems, in terms of their respective spectral properties, as well as their suitability for use in planetary mission with respect to radiation tolerance and their propensity for activation. We also contrast their performance with a Ge detector representative of that flown on MESSENGER and show that: (a) both LaBr3(Ce(3+)) and CeBr3 provide superior detection systems over HPGe in the context of minimally resourced spacecraft and (b) CeBr3 is a more attractive system than LaBr3(Ce(3+)) in terms of sensitivities at lower gamma fluxes. Based on the tests, the FM has now been replaced by the FSM on the BepiColombo spacecraft. Thus, CeBr3 now forms the central gamma-ray detection element on the MPO spacecraft.

Echinococcus canadensis (G7) and Echinococcus granulosus sensu stricto (G1) in swine of southern Brazil.

Science.gov (United States)

Monteiro, D U; Botton, S A; Tonin, A A; Azevedo, M I; Graichen, D A S; Noal, C B; de la Rue, M L

2014-05-28

The cystic echinococcosis (CE) is an important zoonotic disease caused by the parasite Echinococcus spp. In Brazil, this parasite is present in Rio Grande do Sul (RS) state, border with Argentina and Uruguay, causing several damages to human and animal health. This study aimed to identify Echinococcus spp. in hydatid cysts of swine and evaluate the similarity of the genotypes through the phylogenetic analysis. A total of 3,101,992 swine were slaughtered in the central/northern region of RS/Brazil, during 2008-2012. Five isolates were characterized as hydatid cyst by molecular analysis, based on the mitochondrial gene cytochrome c oxidase subunit I (cox-I). The genotypes E. granulosus sensu stricto (G1) (n=2) and E. canadensis (G7) (n=3) were identified in the hydatid cysts. The swine represents a potential intermediate host for different genotypes of Echinococcus spp., besides it can contribute to the perpetuation of the parasite's life cycle in rural areas. Copyright © 2014 Elsevier B.V. All rights reserved.

LiCaAlF sub 6 :Ce crystal: a new scintillator

CERN Document Server

Gektin, A V; Neicheva, S; Gavrilyuk, V; Bensalah, A; Fukuda, T; Shimamura, K

2002-01-01

Scintillation properties of LiCaAlF sub 6 :Ce crystal, well known as the effective UV laser material, is reported. Ce sup 3 sup + emission at 286-305 nm with a single exponential decay time of 35 ns provides a scintillation pulse. Radiation damage in pure and Ce-doped crystals is studied. In contrast to the majority of fluoride crystals, cerium is responsible for the ultradeep traps formation revealing thermostimulated luminescence. Overlapping of color center absorption and Ce sup 3 sup + ion emission bands limits the scintillation efficiency of LiCaAlF sub 6 :Ce at high radiation doses.

The role of charge transfer in the oxidation state change of Ce atoms in the TM13-CeO2(111) systems (TM = Pd, Ag, Pt, Au): a DFT + U investigation.

Science.gov (United States)

Tereshchuk, Polina; Freire, Rafael L H; Ungureanu, Crina G; Seminovski, Yohanna; Kiejna, Adam; Da Silva, Juarez L F

2015-05-28

Despite extensive studies of transition metal (TM) clusters supported on ceria (CeO2), fundamental issues such as the role of the TM atoms in the change in the oxidation state of Ce atoms are still not well understood. In this work, we report a theoretical investigation based on static and ab initio molecular dynamics density functional theory calculations of the interaction of 13-atom TM clusters (TM = Pd, Ag, Pt, Au) with the unreduced CeO2(111) surface represented by a large surface unit cell and employing Hubbard corrections for the strong on-site Coulomb correlation in the Ce f-electrons. We found that the TM13 clusters form pyramidal-like structures on CeO2(111) in the lowest energy configurations with the following stacking sequence, TM/TM4/TM8/CeO2(111), while TM13 adopts two-dimensional structures at high energy structures. TM13 induces a change in the oxidation state of few Ce atoms (3 of 16) located in the topmost Ce layer from Ce(IV) (itinerant Ce f-states) to Ce(III) (localized Ce f-states). There is a charge flow from the TM atoms to the CeO2(111) surface, which can be explained by the electronegativity difference between the TM (Pd, Ag, Pt, Au) and O atoms, however, the charge is not uniformly distributed on the topmost O layer due to the pressure induced by the TM13 clusters on the underlying O ions, which yields a decrease in the ionic charge of the O ions located below the cluster and an increase in the remaining O ions. Due to the charge flow mainly from the TM8-layer to the topmost O-layer, the charge cannot flow from the Ce(IV) atoms to the O atoms with the same magnitude as in the clean CeO2(111) surface. Consequently, the effective cationic charge decreases mainly for the Ce atoms that have a bond with the O atoms not located below the cluster, and hence, those Ce atoms change their oxidation state from IV to III. This increases the size of the Ce(III) compared with the Ce(IV) cations, which builds-in a strain within the topmost Ce layer, and

Comparison of Efficiencies and Mechanisms of Catalytic Ozonation of Recalcitrant Petroleum Refinery Wastewater by Ce, Mg, and Ce-Mg Oxides Loaded Al2O3

Directory of Open Access Journals (Sweden)

Chunmao Chen

2017-02-01

Full Text Available The use of catalytic ozonation processes (COPs for the advanced treatment of recalcitrant petroleum refinery wastewater (RPRW is rapidly expanding. In this study, magnesium (Mg, cerium (Ce, and Mg-Ce oxide-loaded alumina (Al2O3 were developed as cost efficient catalysts for ozonation treatment of RPRW, having performance metrics that meet new discharge standards. Interactions between the metal oxides and the Al2O3 support influence the catalytic properties, as well as the efficiency and mechanism. Mg-Ce/Al2O3 (Mg-Ce/Al2O3-COP reduced the chemical oxygen demand by 4.7%, 4.1%, 6.0%, and 17.5% relative to Mg/Al2O3-COP, Ce/Al2O3-COP, Al2O3-COP, and single ozonation, respectively. The loaded composite metal oxides significantly increased the hydroxyl radical-mediated oxidation. Surface hydroxyl groups (–OHs are the dominant catalytic active sites on Al2O3. These active surface –OHs along with the deposited metal oxides (Mg2+ and/or Ce4+ increased the catalytic activity. The Mg-Ce/Al2O3 catalyst can be economically produced, has high efficiency, and is stable under acidic and alkaline conditions.

Facile hydrothermal synthesis of CeO2 nanopebbles

Indian Academy of Sciences (India)

Administrator

However, to the best of our knowledge the reports on the synthesis of CeO2 ... The base pressure of the XAS chamber was in the range of 10–8 Pa. A Shimadzu ... scopy was investigated to confirm the crystalline quality of CeO2 nanopebbles.

Study of structural and transport properties of nanostructured CeO{sub 2}, Ce{sub 1-x}Ru{sub x}O{sub 2} and Ce{sub 1-x}In{sub x}O{sub 2} thin films

Energy Technology Data Exchange (ETDEWEB)

Rangel, R.; Chavez-Chavez, L. [Division de Estudios de Posgrado, Facultad de Ingenieria Quimica, Universidad Michoacana de S.N.H. (Mexico); Martinez, E. [Centro de Investigacion en Materiales Avanzados, S.C. (CIMAV), Nuevo Leon (Mexico); Bartolo-Perez, P. [Departamento de Fisica Aplicada, CINVESTAV-IPN, Merida, Yucatan (Mexico)

2012-06-15

The present work reports for the first time thin films prepared from Ce{sub 1-x}M{sub x}O{sub 2-{delta}} (M = Ru, In) solid solutions for application as gas sensors. The CeO{sub 2}, Ce{sub 0.95}Ru{sub 0.05}O{sub 2} and Ce{sub 0.95}In{sub 0.05}O{sub 2} thin films were prepared by means of the RF sputtering process onto Si (111) substrates. The deposition conditions were carried out at 500 C varying the deposition time. Targets were prepared via sol-gel process starting from C{sub 6}H{sub 9}O{sub 6}In, Ru{sub 3}(CO){sub 12} and Ce(C{sub 2}H{sub 3}O{sub 2}){sub 3} . 1.5H{sub 2}O compounds and using a ceramic method to consolidate them. The samples were characterized by means of XRD, SEM, and AFM. Their thickness was measured using a profilometer. The results herein obtained regarding the microstructure and transport properties indicate that these materials can be used as gas sensors. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Ultraviolet and near-infrared luminescence of LaBO3:Ce3+,Yb3+

Science.gov (United States)

Wei, Heng-Wei; Shao, Li-Ming; Jiao, Huan; Jing, Xi-Ping

2018-01-01

Ce3+ or Yb3+ singly doped LaBO3 and Ce3+-Yb3+ co-doped LaBO3 were prepared by conventional solid state reactions at 1100 °C and their photoluminescence (PL) properties were investigated. The emission spectrum of LaBO3:Ce3+,Yb3+ contains both the Ce3+ ultraviolet (UV) emissions (355 nm and 380 nm) and the Yb3+ near infrared (NIR) emission (975 nm) when excited by the UV light at 270 nm. By using the data of the Ce3+ decay curves and the PL intensities of both Ce3+ and Yb3+, the energy transfer efficiency (η) from Ce3+ to Yb3+, the actual energy transfer efficiency (AE) and the quantum efficiency (Q) of the Yb3+ emission were calculated. In the Ce3+-Yb3+ co-doped LaBO3, Ce3+ can transfer its absorbed energy to Yb3+ efficiently (η can be over 60%), and Yb3+ shows the Q value over 50% when it accepts the energy from Ce3+, which results in the low AE value ∼30%. The energy transfer process from Ce3+ to Yb3+ may be understood by the charge transfer mechanism: Ce3+ + Yb3+ ↔ Ce4+ + Yb2+. Particularly the Ce3+-Yb3+ co-doped LaBO3 phosphor gives the emissions mainly in the UV range and the NIR range with a portion of visible emissions in eye-insensitive range. This unique property may be suitable for applications in anti-counterfeiting techniques and public security affairs.

Implementace OpenVPN na platformě Windows CE

OpenAIRE

Ešner, Oldřich

2008-01-01

Motivací pro vznik této diplomové práce, která navazuje na stejnojmenný semestrální projekt, byl převod aplikace pro tvorbu virtuálních privátních sítí OpenVPN z operačního systému Windows XP na platformu Windows CE Embedded 6.0. Práce pojednává obecně o virtuálních privátních sítích, a podrobněji o jedné z jejich implementací - OpenVPN. Uvádí základní vlastnosti operačního systému Windows CE, dále popisuje princip ovladačů zařízení v operačních systémech na bázi Windows NT, používaný Windows...

Investigating the capability of ToF-SIMS to determine the oxidation state of Ce

Science.gov (United States)

Seed Ahmed, H. A. A.; Swart, H. C.; Kroon, R. E.

2018-04-01

The capability of time of flight secondary ion mass spectrometry (ToF-SIMS) to determine the oxidation state of Ce ions doped in a phosphor was investigated. Two samples of SiO2:Ce (4 mol%) with known Ce3+/Ce4+ relative concentrations were subjected to ToF-SIMS measurements. The spectra were very similar and no significant differences in the relative peak intensities were observed that would readily allow one to distinguish Ce3+ from Ce4+. Although ToF-SIMS was therefore not useful to distinguish the charge state of Ce ions doped in this phosphor material, the idea in principle was also tested on two other samples, namely CeF3 and CeF4 These contain Ce as part of the host (i.e. much higher concentration) and are fluorides, which is significant because ToF-SIMS has previously been reported to be able to distinguish Eu2+ from Eu3+ in Eu doped Sr5(PO4)3F phosphor. The spectrum of CeF4 contained a small peak related to Ce4+ which was not observed in the CeF3 spectrum, yet the peak related to the Ce3+ ions was found to be much more intense in the spectrum of CeF4 than CeF3, showing that the ToF-SIMS signals cannot be directly interpreted as retaining the charge state of the ions in the original material. Nevertheless, the significant differences in the Ce-related peaks in the ToF-SIMS spectra from CeF3 and CeF4 show that the charge state of Ce may be distinguished. This study shows that while in principle ToF-SIMS may be used to distinguish the charge state of Ce ions, this depends on the sample and it would not be easy to interpret the spectra without a standard or reference.

A novel gamma-ray detector with submillimeter resolutions using a monolithic MPPC array with pixelized Ce:LYSO and Ce:GGAG crystals

Energy Technology Data Exchange (ETDEWEB)

Kato, T., E-mail: katou.frme.8180@asagi.waseda.jp [Research Institute for Science and Engineering, Waseda University, 3-4-1, Ohkubo, Shinjuku, Tokyo (Japan); Kataoka, J.; Nakamori, T.; Miura, T.; Matsuda, H.; Kishimoto, A. [Research Institute for Science and Engineering, Waseda University, 3-4-1, Ohkubo, Shinjuku, Tokyo (Japan); Sato, K.; Ishikawa, Y.; Yamamura, K.; Nakamura, S.; Kawabata, N. [Solid State Division, Hamamatsu Photonics K. K., 1126-1, Ichino-cho, Hamamatsu, Shizuoka (Japan); Ikeda, H. [ISAS/JAXA, 3-1-1, Yoshinodai, Chuo-ku, Sagamihara-shi, Kanagawa (Japan); Yamamoto, S. [Kobe City College of Technology, 8-3, Gakuenhigashimati, Nishi-ku, Kobe-shi, Hyougo 651-2194 (Japan); Kamada, K. [Materials Research Laboratory, Furukawa Co., Ltd., 1-25-13, Kannondai, Tsukuba, Ibaraki 305-0856 (Japan)

2013-01-21

We have developed a large-area monolithic Multi-Pixel Photon Counter (MPPC) array consisting of 4×4 channels with a three-side buttable package. Each channel has a photosensitive area of 3×3 mm{sup 2} and 3600 Geiger mode avalanche photodiodes (APDs). For typical operational gain of 7.5×10{sup 5} at +20 °C, gain fluctuation over the entire MPPC device is only ±5.6%, and dark count rates (as measured at the 1 p.e. level) amount to ≤400kcps per channel. We first fabricated a gamma-ray camera consisting of the MPPC array with one-to-one coupling to a Ce-doped (Lu,Y){sub 2}(SiO{sub 4})O (Ce:LYSO) crystal array (4×4 array of 3×3×10 mm{sup 3} crystals). Energy and time resolutions of 11.5±0.5% (FWHM at 662 keV) and 493±22ps were obtained, respectively. When using the charge division resistor network, which compiles signals into four position-encoded analog outputs, the ultimate positional resolution is estimated as 0.19 mm in both X and Y directions, while energy resolution of 10.2±0.4% (FWHM) was obtained. Finally, we fabricated submillimeter Ce:LYSO and Ce-doped Gd{sub 3}Ga{sub 3}Al{sub 2}O{sub 12} (Ce:GGAG) scintillator matrices each consisting of 1.0×1.0, 0.7×0.7 and 0.5×0.5 mm{sup 2} pixels, to further improve the spatial resolution. In all types of Ce:LYSO and Ce:GGAG matrices, each crystal was clearly resolved in the position histograms when irradiated by a {sup 137}Cs source. The energy resolutions for 662 keV gamma-rays for each Ce:LYSO and Ce:GGAG scintillator matrix were ≤14.3%. These results suggest excellent potential for its use as a high spatial medical imaging device, particularly in positron emission tomography (PET). -- Highlights: ► We developed a newly designed large-area monolithic MPPC array. ► We obtained fine gain uniformity, and good energy and time resolutions when coupled to the LYSO scintillator. ► We fabricated gamma-ray camera consisting of the MPPC array and submillimeter pixelized LYSO and GGAG scintillators. ► In

Preparation and characterization of Ce-doped HfO{sub 2} nanoparticles

Energy Technology Data Exchange (ETDEWEB)

Gálvez-Barboza, S. [Centro de Investigación en Química Aplicada, Departamento de Materiales Avanzados, Blvd. Enrique Reyna Hermosillo #140, C.P. 25294 Saltillo, Coahuila (Mexico); Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional, Av. Industria Metalúrgica # 1062 Parque Industrial, C.P. 25900 Ramos Arizpe, Coahuila (Mexico); González, L.A. [Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional, Av. Industria Metalúrgica # 1062 Parque Industrial, C.P. 25900 Ramos Arizpe, Coahuila (Mexico); Puente-Urbina, B.A.; Saucedo-Salazar, E.M. [Centro de Investigación en Química Aplicada, Departamento de Materiales Avanzados, Blvd. Enrique Reyna Hermosillo #140, C.P. 25294 Saltillo, Coahuila (Mexico); García-Cerda, L.A., E-mail: luis.garcia@ciqa.edu.mx [Centro de Investigación en Química Aplicada, Departamento de Materiales Avanzados, Blvd. Enrique Reyna Hermosillo #140, C.P. 25294 Saltillo, Coahuila (Mexico)

2015-09-15

Highlights: • Ce-doped HfO{sub 2} nanoparticles were prepared by a modified solgel method. • Ce-doped HfO{sub 2} nanoparticles have a semispherical shape with sizes between 6 and 11.5 nm. • The samples doped with 10% in weight of Ce directly crystallized in a cubic structure. • A quick, straightforward and effective route for the preparation of Ce-doped nanoparticles. - Abstract: A modified solgel method to synthesize Ce-doped HfO{sub 2} nanoparticles was carried out using a precursor material prepared with cerium nitrate, hafnium chloride, citric acid and ethylene glycol. The obtained precursor material was calcined at 500 and 700 °C for 2 h in air. The influence of the concentration of Ce and the calcination temperature was studied to observe the structural and morphological changes of the obtained materials. For the characterization, X-ray diffraction (XRD), transmission electron microscopy (TEM) and Raman scattering (RS) were employed. The XRD patterns shown that the Ce-doped HfO{sub 2} undergoes a structural transformation from monoclinic to cubic phase, which is significantly dependent on the Ce content and calcination temperature. TEM images have also confirmed the existence of semispherical nanoparticles with sizes between 6 and 11.5 nm.

Feeding associations between Guiana dolphins, Sotalia guianensis (Van Bénèden, 1864) and seabirds in the Lagamar estuary, Brazil.

Science.gov (United States)

Santos, M C O; Oshima, J E F; Pacífico, E S; Silva, E

2010-02-01

The main objective of the present study was to describe the characteristics regarding interactions between Guiana dolphins, Sotalia guianensis and seabirds in feeding associations in two distinct areas of the Lagamar estuary, Brazil. Boat-based surveys directed towards photo-identification studies of S. guianensis were conducted in the Cananéia Estuary (CE) (25 degrees 01' S and 47 degrees 55' W) from July 2004 to March 2008, as well as in the Paranaguá Estuarine Complex (PEC) (25 degrees 24' S and 48 degrees 24' W) from April 2006 to February 2008. On all occasions when seabirds were observed engaging in multi-species feeding associations with S. guianensis, data on species involved and their numbers were gathered. From 435 observed groups of S. guianensis in the CE, 38 (8.7%) involved interactions with seabirds. In the PEC, from the 286 observed groups, 32 (11.2%) involved the mentioned interactions. The following seabirds were observed in feeding associations with S. guianensis: Fregata magnificens, Sula leucogaster, Phalacrocorax brasilianus, and Sterna sp. In the CE, S. leucogaster was more commonly observed in feeding associations with Guiana dolphins (chi2 = 22.84; d.f. = 3, p Lagamar estuary.

Pequi (Caryocar coriaceum Wittm. extrativism: situation and perspectives for its sustainability in Cariri Cearense, Brazil

Directory of Open Access Journals (Sweden)

Tamires Coelho Matias Maciel

2018-04-01

Full Text Available Considering the plant richness of Chapada do Araripe, Brazil, the pequi (Caryocar coriaceum Wittm extractivism occurs as an important activity that affects the economy and social life of the main cities of Cearense Cariri, although there is little knowledge about its current situation and sustainability perspective. The aim of this work is to collect information regarding actor relationships involved in the pequi extractive activity, relating them to the sustainability dimensions. This study was carried in the Barreiro Novo camping site, located in the state highway CE 060 in the Jardim-Ce municipality. Semistructured questionnaires were used with pequi collectors to establish a socioeconomic profile, besides using the participant observation method, pictures and content analysis in order to relate and identify the sustainability in this environment. Extractivism activity in the Chapada do Araripe region is something cultural, which has a special vision towards environmental issues that generates income for extrastivist families. However, the region needs policies for improving social conditions (water and sanitation in the camping site and keeping the tradition without missing the environmental perspective.

FIRST-PRINCIPLES PHASE DIAGRAM OF THE Ce-Th SYSTEM

International Nuclear Information System (INIS)

Landa, A; Soderlind, P

2005-01-01

Actinide physics has seen a remarkable focus the last decade or so due to the combination of improved experimental diamond-anvil-cell techniques and the development of fast computers and more advanced theory. All f-electron systems are expected to have multiphase phase diagrams due to the sensitivity of the f-electron band to external influences such as pressure and temperature. For instance, compression of an f-electron metal generally causes the occupation of f-states to change due to the shift of these bands relative to others. This can in some cases, as in the Ce-Th system, cause the crystal to adopt a lower symmetry structure at elevated pressures. Here we study the phase stabilities of Ce, Th, and the Ce-Th system as a function of compression. Theoretically, both Ce and Th metals are rather well described within the DFT, although a proper treatment of the Ce-Th alloys has not yet been presented. In the present paper we revisit this problem by applying the modern theory of random alloys based on the coherent potential approximation (CPA)

Surface nucleation and independent growth of Ce(OH)4 within confinement space on modified carbon black surface to prepare nano-CeO2 without agglomeration

Science.gov (United States)

Zhang, Xinyue; Xia, Chunhui; Li, Kaitao; Lin, Yanjun

2018-04-01

Highly dispersed negative carboxyl groups can be formed on carbon black (CB) surface modified with strong nitric acid. Therefore positive cations can be uniformly absorbed by carboxyl groups and precipitated within a confinement space on modified CB surface to prepare highly dispersed nanomaterials. In this paper, the formation and dispersion status of surface negative carboxyl groups, adsorption status of Ce3+, surface confinement nucleation, crystallization and calcination process were studied by EDS, SEM, and laser particle size analysis. The results show that the carboxyl groups formed on modified CB surface are highly dispersed, and Ce3+ cations can be uniformly anchored by carboxyl groups. Therefore, highly dispersed Ce3+ can react with OH- within a confinement surface region to form positive nano-Ce(OH)4 nuclei which also can be adsorbed by electrostatic attraction. After independent growth of Ce(OH)4 without agglomeration, highly dispersed CeO2 nanoparticles without agglomeration can be prepared together with the help of effectively isolates by CO2 released in the combustion of CB.

The magnetic properties of Ce/Pd surface alloys investigated using DFT

KAUST Repository

Shuttleworth, I.G.

2014-06-01

The surface alloys that form between Ce and Pd(1 1 1), Pd(1 0 0) and both unreconstructed and missing-row type Pd(1 1 0) at low Ce coverage ( θCe=19ML) have shown permanent magnetism that is mediated in part by an RKKY-like delocalized Ce 6s-Pd 5s interaction. The Pd 4d states are significantly affected by alloying and their behavior cannot be explained by a purely spin-dependent Hamiltonian. Experimental observations of changes to the Pd 4d states are explained and the implications of Ce/Pd magnetism in reforming catalysis are discussed. © 2014 Elsevier B.V. All rights reserved.

The magnetic properties of Ce/Pd surface alloys investigated using DFT

KAUST Repository

Shuttleworth, I.G.

2014-01-01

The surface alloys that form between Ce and Pd(1 1 1), Pd(1 0 0) and both unreconstructed and missing-row type Pd(1 1 0) at low Ce coverage ( θCe=19ML) have shown permanent magnetism that is mediated in part by an RKKY-like delocalized Ce 6s-Pd 5s interaction. The Pd 4d states are significantly affected by alloying and their behavior cannot be explained by a purely spin-dependent Hamiltonian. Experimental observations of changes to the Pd 4d states are explained and the implications of Ce/Pd magnetism in reforming catalysis are discussed. © 2014 Elsevier B.V. All rights reserved.

Assessing Hubbard-corrected AM05+U and PBEsol+U density functionals for strongly correlated oxides CeO_2 and Ce_2O_3

International Nuclear Information System (INIS)

Weck, Philippe F.; Kim, Eunja

2016-01-01

The structure–property relationships of bulk CeO_2 and Ce_2O_3 have been investigated using AM05 and PBEsol exchange–correlation functionals within the frameworks of Hubbard-corrected density functional theory (DFT+U) and density functional perturbation theory (DFPT+U). Compared with conventional PBE+U, RPBE+U, PW91+U and LDA+U functionals, AM05+U and PBEsol+U describe experimental crystalline parameters and properties of CeO_2 and Ce_2O_3 with superior accuracy, especially when +U is chosen close to its value derived by the linear-response approach. Lastly, the present findings call for a reexamination of some of the problematic oxide materials featuring strong f- and d-electron correlation using AM05+U and PBEsol+U.

Crystal growth and magnetic properties of equiatomic CeAl

Science.gov (United States)

Das, Pranab Kumar; Thamizhavel, A.

2015-03-01

Single crystal of CeAl has been grown by flux method using Ce-Al self-flux. Several needle like single crystals were obtained and the length of the needle corresponds to the [001] crystallographic direction. Powder x-ray diffraction revealed that CeAl crystallizes in orthorhombic CrB-type structure with space group Cmcm (no. 63). The magnetic properties have been investigated by means of magnetic susceptibility, isothermal magnetization, electrical transport, and heat capacity measurements. CeAl is found to order antiferromagnetically with a Neel temperature TN = 10 K. The magnetization data below the ordering temperature reveals two metamagentic transitions for fields less than 20 kOe. From the inverse magnetic susceptibility an effective moment of 2.66 μB/Ce has been estimated, which indicates that Ce is in its trivalent state. Electrical resistivity data clearly shows a sharp drop at 10 K due to the reduction of spin disorder scattering of conduction electrons thus confirming the magnetic ordering. The estimated residual resistivity ratio (RRR) is 33, thus indicating a good quality of the single crystal. The bulk nature of the magnetic ordering is also confirmed by heat capacity data. From the Schottky anomaly of the heat capacity we have estimated the crystal field level splitting energies of the (2J + 1) degenerate ground state as 25 K and 175 K respectively for the fist and second excited states.

Laser clad Ni-base alloy added nano- and micron-size CeO 2 composites

Science.gov (United States)

Zhang, Shi Hong; Li, Ming Xi; Cho, Tong Yul; Yoon, Jae Hong; Lee, Chan Gyu; He, Yi Zhu

2008-07-01

Micron-size Ni-base alloy (NBA) powders are mixed with both 1.5 wt% (%) micron-CeO 2 (m-CeO 2) and also 1.0-3.0% nano-CeO 2 (n-CeO 2) powders. These mixtures are coated on low carbon steel (Q235) by 2.0 kW CO 2 laser cladding. The effects on microstructures, microhardness and wear resistance of the coating by the addition of m- and n-CeO 2 powders to NBA (m- and n-CeO 2/NBA) have been investigated. Addition to the primary phases of γ-Ni, Cr 23C 6 and Ni 3B of NBA coating, CeNi 3 shows up both in m- and n-CeO 2/NBA coatings and CeNi 5 appears only in n-CeO 2/NBA coating. Directional dendrite and coarse equiaxed dendrite are grown in m-CeO 2/NBA coating from interface to central zone, whereas multi-oriented dendrite and fine equiaxed dendrite growth by addition of n-CeO 2. The microhardness and wear resistance of coatings are greatly improved by CeO 2 powder addition, and compared to the addition of 1.0% and 3.0%, 1.5% n-CeO 2/NBA is the best. Hardness and wear resistance of the coating improves with decreasing CeO 2 size from micron to nano.

{sup 115}In NQR studies of CeRhIn{sub 5} and CeCoIn{sub 5} under high pressure

Energy Technology Data Exchange (ETDEWEB)

Kohori, Y. [Department of Physics, Faculty of Science, Chiba University, Chiba 263-8522 (Japan)]. E-mail: kohori@faculty.chiba-u.jp; Taira, H. [Graduate School of Science and Technonogy, Chiba University, Chiba 263-8522 (Japan); Fukazawa, H. [Graduate School of Science and Technonogy, Chiba University, Chiba 263-8522 (Japan); Kohara, T. [Graduate School of Material Science, University of Hyogo, Hyogo 678-1297 (Japan); Iwamoto, Y. [Division of Cargo and Transportation Science, Kobe University, Kobe 658-0022 (Japan); Matsumoto, T. [National Institite of Material Science, Tsukuba 305-0044 (Japan); Maple, M.B. [Department of Physics and Institute for Pure and Applied Physical Science, University of California, San Diego, La Jolla, CA 92093, USA (United States)

2006-02-09

We have carried out{sup 115}In nuclear quadrupole resonance (NQR) measurements in CeRhIn{sub 5} and CeCoIn{sub 5} under presure P. The nuclear spin-lattice relaxation rates, 1/T{sub 1}, of{sup 115}In indicated that the anisotropic superconductivity with line nodes occurred near an antiferromagnetic state. The application of P suppressed the antiferromagnetic, AF, spin fluctuations and moves the system away from the AF state to the non-magnetic Fermi liquid state. The P dependence of 1/T{sub 1} in the superconducting state of CeCoIn{sub 5} shows that the magnitude of the superconducting energy gap scales with its T{sub C} up to 3.0 GPa.

Heteroaggregation, transformation and fate of CeO2 nanoparticles in wastewater treatment

International Nuclear Information System (INIS)

Barton, Lauren E.; Auffan, Melanie; Olivi, Luca; Bottero, Jean-Yves; Wiesner, Mark R.

2015-01-01

Wastewater Treatment Plants (WWTPs) are a key pathway by which nanoparticles (NPs) enter the environment following release from NP-enabled products. This work considers the fate and exposure of CeO 2 NPs in WWTPs in a two-step process of heteroaggregation with bacteria followed by the subsequent reduction of Ce(IV) to Ce(III). Measurements of NP association with solids in sludge were combined with experimental estimates of reduction rate constants for CeO 2 NPs in Monte Carlo simulations to predict the concentrations and speciation of Ce in WWTP effluents and biosolids. Experiments indicated preferential accumulation of CeO 2 NPs in biosolids where reductive transformation would occur. Surface functionalization was observed to impact both the distribution coefficient and the rates of transformation. The relative affinity of CeO 2 NPs for bacterial suspensions in sludge appears to explain differences in the observed rates of Ce reduction for the two types of CeO 2 NPs studied. - Highlights: • We combine experimental and computational methods to track CeO 2 NPs through WWTPs. • We investigate the importance of environmental transformations on NP exposure. • We estimate the concentrations of CeO 2 NPs and reductive transformation byproducts. - CeO 2 nanoparticles that are released to the waste stream will preferentially associate with the solid phase (∼96%), where they will undergo significant transformation (∼50%)

Properties and practical application of thin CeOx films

Directory of Open Access Journals (Sweden)

Maksimchuk N. V.

2010-10-01

Full Text Available The properties of CeOx films produced by various methods have been investigated. According to the comparative analisys “metallic mirror oxidation” method allows to produce films with significantly better characteristics than the «explosive evaporation» method. Though the latter method yields higher photosensitivity of CeOx films and structures on their base. In the process the optimal value of the substrate temperature was determined. Obtained data expand the CeOx application potential in microelectronic sensor sphere.

Fermi-surface topology of the heavy-fermion system Ce2PtIn8

Science.gov (United States)

Klotz, J.; Götze, K.; Green, E. L.; Demuer, A.; Shishido, H.; Ishida, T.; Harima, H.; Wosnitza, J.; Sheikin, I.

2018-04-01

Ce2PtIn8 is a recently discovered heavy-fermion system structurally related to the well-studied superconductor CeCoIn5. Here we report on low-temperature de Haas-van Alphen-effect measurements in high magnetic fields in Ce2PtIn8 and Pr2PtIn8 . In addition, we performed band-structure calculations for localized and itinerant Ce-4 f electrons in Ce2PtIn8 . Comparison with the experimental data of Ce2PtIn8 and of the 4 f -localized Pr2PtIn8 suggests the itinerant character of the Ce-4 f electrons. This conclusion is further supported by the observation of effective masses in Ce2PtIn8 , which are strongly enhanced with up to 26 bare electron masses.

Highly porous CeO2 nanostructures prepared via combustion synthesis for supercapacitor applications

DEFF Research Database (Denmark)

Kadirvelayutham, Prasanna; Santhoshkumar, P.; Jo, Yong Nam

2017-01-01

We report highly porous CeO2 nanostructures (CeO2 NSs) suitable for supercapacitor applications, synthesized using a fast and cost effective combustion approach. Due to its prominent valence states of Ce3+/Ce4+, CeO2 has emerged as a promising pseudocapacitive material. The drawback of using CeO2...... as a supercapacitor electrode is its poor electrical conductivity. We overcame this drawback of CeO2 by creating oxygen vacancies on its surface, which act to enhance its electrical conductivity. The physical interpretation of the as-synthesized CeO2 NSs shows that they have dense active sites and diffusion pathways...... that enhance the performance of the electrode in a supercapacitor. Electrodes prepared using the synthesized CeO2 NSs exhibited the initial specific capacitance of 134.6 F g-1 and superior cycling stability of 92.5% after 1000 cycles at a constant current density of 1 A g-1, indicating their potential...

Ce activated potassium bromide phosphor for lyoluminescence dosimetry of ionizing radiation

International Nuclear Information System (INIS)

Bhujbal, P.M.; Dhoble, S.J.

2013-01-01

The lyoluminescence (LL) properties of gamma irradiated KBr:Ce phosphor are reported in this paper. The samples were prepared by wet chemical route. The prepared material was characterized by lyoluminescence technique. LL in KBr:Ce have been recorded for different gamma doses. The nature of variation of peak LL intensity is found to be sublinear with gamma irradiation dose, and the peak LL intensity is found to be dependent on concentrations of added Ce in the samples. Negligible fading in the prepared KBr:Ce (0.5 mol%) sample is observed. -- Highlights: • The LL intensities are found to be dependent on concentrations of Ce ion. • The LL intensities are found to be dependent on gamma rays radiation dose. • Dose response of KBr:Ce (0.5 mol%) is observed linear between 0.08 and 1.00 kGy. • The prepared material may be useful for ionizing radiation dosimetry

Room-temperature synthesis and characterization of porous CeO2 thin films

International Nuclear Information System (INIS)

Chu, Dewei; Masuda, Yoshitake; Ohji, Tatsuki; Kato, Kazumi

2012-01-01

CeO 2 thin films with hexagonal-shaped pores were successfully prepared by a facile electrodeposition at room temperature combined with an etching process. By using electrodeposited ZnO nanorods as a soft template, the morphology, and microstructure of the CeO 2 could be controlled. TEM observation indicated that as-prepared CeO 2 film is composed of nanocrystals with average size of several nanometers, while XPS analysis showed the coexistence of Ce 3+ and Ce 4+ in the film. The photoluminescence properties of CeO 2 films were measured, which showed much higher sensitivity compared to bare substrate. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Highly active and durable Ca-doped Ce-SBA-15 catalyst for biodiesel production

International Nuclear Information System (INIS)

Thitsartarn, Warintorn; Maneerung, Thawatchai; Kawi, Sibudjing

2015-01-01

In this work, Ca-doped Ce-incorporated SBA-15 (Ca/CeS) catalyst was successfully synthesized by using direct synthesis of Ce-incorporated SBA-15 followed by impregnation of CaO (calcium oxide). The maximum Si/Ce molar ratio that Ce atoms can be incorporated successfully into the mesoporous framework was found to be 5 (CeS-5). After the impregnation of 30 wt. % Ca, the obtained 30Ca/CeS-5 catalysts showed the superior catalytic performance for transesterification reaction of palm oil with methanol and also the higher catalytic activity as compared to other supported catalysts, i.e. CaO/CeO 2 and CaO–CeO 2 /SBA-15. This can be attributed to the well-dispersion of CaO on the CeS-5 support surface. Furthermore, it was found that the leaching of Si, Ce and Ca from the catalyst into biodiesel produced was negligible (i.e. <1 ppm after 7 cycles), indicating the strong interaction between CaO and CeS-5 support. As a result, the 30Ca/CeS-5 catalyst can be reused at least 15 cycles with insignificant decrease in catalytic activity, offering the efficient CaO-based catalyst for biodiesel production. - Highlights: • Mesoporous Ca-based catalyst was successfully developed for biodiesel production. • Catalyst exhibited high activity towards transesterification (FAME yield > 98%). • Catalyst can be effectively re-used at least 15 cycles. • Extremely low catalyst contaminant (<1 ppm) was presented

Effect of cerium on the corrosion behaviour of sintered (Nd,Ce)FeB magnet

Energy Technology Data Exchange (ETDEWEB)

Yang, Lijing [CAS Key Laboratory of Magnetic Materials and Devices, Zhejiang Province Key Laboratory of Magnetic Materials and Application Technology, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201 (China); Bi, Mengxue [CAS Key Laboratory of Magnetic Materials and Devices, Zhejiang Province Key Laboratory of Magnetic Materials and Application Technology, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201 (China); Nano Science and Technology Institute, University of Science and Technology of China, Hefei 230026 (China); Jiang, Jianjun; Ding, Xuefeng [CAS Key Laboratory of Magnetic Materials and Devices, Zhejiang Province Key Laboratory of Magnetic Materials and Application Technology, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201 (China); Zhu, Minggang; Li, Wei [Functional Materials Research Institute, Central Iron & Steel Research Institute, Beijing 100081 (China); Lv, Zhongshan [Ningbo Shuo Teng new material Co., Ltd., Cixi 315301 (China); Song, Zhenlun, E-mail: songzhenlun@nimte.ac.cn [CAS Key Laboratory of Magnetic Materials and Devices, Zhejiang Province Key Laboratory of Magnetic Materials and Application Technology, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201 (China)

2017-06-15

Highlights: • A little Ce could promote the magnets for a better corrosion resistance. • With increased Ce contents, the corrosion resistances of magnets decrease. • As the corrosion developed, the magnetic properties decreased. - Abstract: For the balanced consumption of rare-earth elements, cerium (Ce) was partially used for NdFeB magnets instead of Nd. The corrosion behaviour of the (Nd,Ce)FeB magnet with different Ce contents in 3.5% NaCl solution was investigated by SEM, XRD, EDS and electrochemical tests. After immersion, the weight loss was calculated and the magnetic properties of the samples were measured. Results showed that Ce affected the corrosion of the (Nd,Ce)FeB magnet. Compared with the NdFeB magnet without Ce but of the same grade as the magnetic energy product, (Nd,Ce)FeB magnet showed better corrosion resistance. With increased Ce content, the corrosion resistances and magnetic properties of (Nd,Ce)FeB magnets were investigated.

An Update on NiCE Support for BISON

Energy Technology Data Exchange (ETDEWEB)

McCaskey, Alex [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Billings, Jay Jay [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Deyton, Jordan H. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Wojtowicz, Anna [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2015-09-01

The Nuclear Energy Advanced Modeling and Simulation program (NEAMS) from the Department of Energy s Office of Nuclear Energy has funded the development of a modeling and simulation workflow environment to support the various codes in its nuclear energy scientific computing toolkit. This NEAMS Integrated Computational Environment (NiCE) provides extensible tools and services that enable efficient code execution, input generation, pre-processing visualizations, and post-simulation data analysis and visualization for a large portion of the NEAMS Toolkit. A strong focus for the NiCE development team throughout FY 2015 has been support for the Multiphysics Object Oriented Simulation Environment (MOOSE) and the NEAMS nuclear fuel performance modeling application built on that environment, BISON. There is a strong desire in the program to enable and facilitate the use of BISON throughout nuclear energy research and industry. A primary result of this desire is the need for strong support for BISON in NiCE. This report will detail improvements to NiCE support for BISON. We will present a new and improved interface for interacting with BISON simulations in a variety of ways: (1) improved input model generation, (2) embedded mesh and solution data visualizations, and (3) local and remote BISON simulation launch. We will also show how NiCE has been extended to provide support for BISON code development.

The CE3R Network: current status and future perspectives

Science.gov (United States)

Lenhardt, Wolfgang; Pesaresi, Damiano; Živčić, Mladen; Costa, Giovanni; Kuk, Kresimir; Bondár, István; Duni, Llambro; Spacek, Petr

2016-04-01

In order to improve the monitoring of seismic activities in the border regions and to enhance the collaboration between countries and seismological institutions in Central Europe, the Environment Agency of the Slovenian Republic (ARSO), the Italian National Institute for Oceanography and Experimental Geophysics (OGS), the University of Trieste (UniTS) and the Austrian Central Institute for Meteorology and Geodynamics (ZAMG) established in 2001 the "South Eastern Alps Transfrontier Seismological Network". In May 2014 ARSO, OGS, UniTS and ZAMG agreed to formalize the transfrontier network, to name it "Central and East European Earthquake Research Network", (CE3RN or CE3R Network) in order to locate it geographically since cross-border networks can be established in other areas of the world and to expand their cooperation, including institutions in other countries. The University of Zagreb (UniZG) joined CE3RN in October 2014. The Kövesligethy Radó Seismological Observatory (KRSZO) of the Hungarian Academy of Sciences joined CE3RN in October 2015. The Institute of Geosciences, Energy, Water and Environment (IGEWE) of the Polytechnic University of Tirana joined CE3RN in November 2015. The Institute of Physics of the Earth (IPE) of the Masaryk University in Brno joined CE3RN in November 2015. CE3RN Parties intend to formalize and possibly extend their ongoing cooperation in the field of seismological data acquisition, exchange and use for seismological and earthquake engineering and civil protection purposes. The purpose of this cooperation is to retain and expand the existing cross-border network, specify the rules of conduct in the network management, improvements, extensions and enlargements, enhance seismological research in the region, and support civil protection activities. Since the formal establishment of CE3RN, several common projects have been completed, like the SeismoSAT project for the seismic data center connection over satellite funded by the Interreg

Structure and Chemical Bond of Thermoelectric Ce-Co-Sb Skutterudites

Institute of Scientific and Technical Information of China (English)

无

2001-01-01

The correlations among composition,structure,chemical bond and thermoelectric property of skutterudites CoSb3 and CeCo5Fe3Sb12 have been studied by using density function and discrete variation (DFT-DVM) method.Three models for this study were proposed and calculated by which the "rattling" pattern was described.Model 1 is with Ce in the center,model 2 is with Ce away the center and near to Sb,and model 3 is also with Ce away the center but near to Fe.The calculated results show that in model 3,the ionic bond is the strongest,but the covalent bond is the weakest.Due to the different changes between ionic and covalent bond,there is less difference in the stability among the models 1,2 and 3.Therefore,these different models can exist at the same time,or can translate from one to another more easily.In other words,the "rattling" pattern has taken place.Unfilled model of CoSb3,without Ce and Fe,is called model 4.The covalent bond of Co-Sb or Fe-Sb in models 1,2 and 3 is weaker than that of Co-Sb in model 4,as some electrical cloud of Sb takes part in the covalent bond of Ce-Sb in the filled models.The result is consistent with the experimental result that the thermal conductivity of CeCo5Fe3Sb12 is lower than that of CoSb3,and the thermoelectric property of CeCo5Fe3Sb12 is superior to that of CoSb3.

Optical spectroscopy of Ce{sup 3+} in BaLiF{sub 3}

Energy Technology Data Exchange (ETDEWEB)

Yamaga, M.; Imai, T. [Department of Electrical and Electronic Engineering, Faculty of Engineering, Gifu University, Gifu 501-1193 (Japan); Shimamura, K.; Fukuda, T. [Institute for Materials Research, Tohoku University, Sendai 980-8577 (Japan); Honda, M. [Faculty of Science, Naruto University of Education, Naruto 772-8502 (Japan)

2000-04-10

The optical absorption spectrum of Ce{sup 3+} in BaLiF{sub 3} crystals consists of several overlapping broad bands. The Ce{sup 3+} luminescence shows broad bands due to moderate electron-phonon interaction in the 5d excited state. Three distinct Ce{sup 3+} sites in the crystal were assigned from the optical spectra. The luminescence spectrum from the dominant Ce{sup 3+} site has a large Stokes shift ({approx}8300 cm{sup -1}), whereas that from one of the two minor Ce{sup 3+} sites has a Stokes shift of half that magnitude ({approx}4400 cm{sup -1}), assuming that the excitation spectrum is almost the same as for the dominant site. The peaks of the lowest-energy absorption and luminescence bands for the other minor Ce{sup 3+} site are shifted to lower energy, and the Stokes shift energy ({approx}7800 cm{sup -1}) is close to that for the dominant site. These three Ce{sup 3+} sites are assigned to configurations of Ce{sup 3+} accompanied by different charge compensators. This assignment is consistent with preliminary electron spin-resonance results indicating that there exist two tetragonal and two orthorhombic Ce{sup 3+} centres in the absence of the cubic centre. (author)

Adsorption and Reaction of Acetone over CeOX(111) Thin Films

International Nuclear Information System (INIS)

Mullins, David R.; Senanayake, Sanjaya D.; Gordon, Wesley O.; Overbury, Steven H.

2009-01-01

This study reports the interaction of acetone (CH3COCH3), the simplest ketone, with well ordered CeO2(111) thin film surfaces. The fully oxidized CeO2(111) surface shows a weak interaction with acetone with the sole desorption product (TPD) being acetone at 210 K. The chemisorbed molecule binds to the surface as the ?1-acetone species rather than through a bridge-bonded dioxy-configuration. Exposure of a CeO2(111) surface to acetone at 600K removes oxygen as CO and results in the conversion of Ce4+ to Ce3+. Acetone chemisorbs strongly on reduced CeO2-x(111) with molecular acetone desorbing near 500 K. Decomposition also occurs with H2 desorbing between 450 and 600 K and C reacting with O in the ceria to desorb above 650 K. A stable species exists from 200 to 500 K on the reduced surface that has three unique types of C. High resolution C 1s XPS spectra indicate these are Ce-CH2, C-CH3 and C-O species. C k-edge NEXAFS indicates the presence of C(double b ond)C and C(double b ond)O bonds. It is postulated that the intermediate is a carbanion bonded through both O and C atoms to Ce cations.

Preparation and Characterization of Graphite Waste/CeO2 Composites

Science.gov (United States)

Kusrini, E.; Utami, C. S.; Nasruddin; Prasetyanto, E. A.; Bawono, Aji A.

2018-03-01

In this research, the chemical modification of graphite waste with CeO2 was developed and characterized. Graphite waste was pretreated with mechanical to obtain the size 200 mesh (75 μm), and thermal methods at 110°C oven for 6 hours. Here, we demonstrate final properties of graphite before modification (GBM), activated graphite (GA) and graphite/CeO2 composite with variation of 0.5, 1 and 2 g of CeO2 (G0.5; G1; G2). The effect of CeO2 concentration was observed. The presence of cerium in modified graphite samples (G0.5; G1; G2) were analyzed using SEM-EDX. The results show that the best surface area was found in G2 is 26.82 m2/g. The presence of CeO2 onto graphite surface does not significantly increase the surface area of composites.

Selective Synthesis of Mesoporous and Nanorod CeVO4 without Template

International Nuclear Information System (INIS)

Zhu Ling; Li Qin; Li Jiayan; Liu Xiangdong; Meng Jian; Cao Xueqiang

2007-01-01

A simple and efficient method has been established for the selective synthesis of mesoporous and nanorod CeVO 4 with different precursors by sonochemical method. CeVO 4 nanorod can be simply synthesized by ultrasound irradiation of Ce(NO 3 ) 3 and NH 4 VO 3 in aqueous solution without any surfactant or template. While mesoporous CeVO 4 with high specific surface area can be prepared with Ce(NO 3 ) 3 , V 2 O 5 and NaOH in the same way. Mesoporous CeVO 4 has a specific surface area of 122 m 2 g -1 and an average pore size of 5.2 nm; CeVO 4 nanorods have a diameter of about 5 nm, and a length of 100-150 nm. The ultrasound irradiation and ammonia in the reactive solution are two key factors in the formation of such rod-like products. X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), thermogravimetric (TG) and differential thermal analyses (DTA), UV/vis absorption spectroscopy and Brunauer-Emmett-Teller (BET) were applied for characterization of the as-prepared products

Luminescence properties of Y3Al5O12:Ce nanoceramics

International Nuclear Information System (INIS)

Zorenko, Yu.; Voznyak, T.; Gorbenko, V.; Zych, E.; Nizankovski, S.; Dan'ko, A.; Puzikov, V.

2011-01-01

Comparative analysis of the luminescent properties of Y 3 Al 5 O 12 :Ce (YAG:Ce) transparent optical ceramics (OS) with those of single crystal (SC) and single crystalline film (SCF) analogues has been performed under excitation by pulsed synchrotron radiation in the fundamental absorption range of YAG host. It has been shown that the properties of YAG:Ce OC are closer to the properties of the SCF counterpart, where Y Al antisite defects are completely absent, rather than to the properties of SC of this garnet with large concentration of Y Al antisite defects. At the same time, the luminescence spectra of YAG:Ce OC show weak emission bands in the 200-470 nm range related to Y Al antisite defects and charged oxygen vacancies (F + and F centers). YAG:Ce OS also possesses significantly larger contribution of slow components in the Ce 3+ luminescence decay under high-energy excitation in comparison with SC and SCF of this garnet due to the involvement of antisite defects, charged oxygen vacancies as well as boundaries of grains in the energy transfer processes from the host to the Ce 3+ ions.

Effect of cerium on the corrosion behaviour of sintered (Nd,Ce)FeB magnet

Science.gov (United States)

Yang, Lijing; Bi, Mengxue; Jiang, Jianjun; Ding, Xuefeng; Zhu, Minggang; Li, Wei; Lv, Zhongshan; Song, Zhenlun

2017-06-01

For the balanced consumption of rare-earth elements, cerium (Ce) was partially used for NdFeB magnets instead of Nd. The corrosion behaviour of the (Nd,Ce)FeB magnet with different Ce contents in 3.5% NaCl solution was investigated by SEM, XRD, EDS and electrochemical tests. After immersion, the weight loss was calculated and the magnetic properties of the samples were measured. Results showed that Ce affected the corrosion of the (Nd,Ce)FeB magnet. Compared with the NdFeB magnet without Ce but of the same grade as the magnetic energy product, (Nd,Ce)FeB magnet showed better corrosion resistance. With increased Ce content, the corrosion resistances and magnetic properties of (Nd,Ce)FeB magnets were investigated.

CeBr3 as a room-temperature, high-resolution gamma-ray detector

International Nuclear Information System (INIS)

Guss, Paul; Reed, Michael; Yuan Ding; Reed, Alexis; Mukhopadhyay, Sanjoy

2009-01-01

Cerium bromide (CeBr 3 ) has become a material of interest in the race for high-resolution gamma-ray spectroscopy at room temperature. This investigation quantified the potential of CeBr 3 as a room-temperature, high-resolution gamma-ray detector. The performance of CeBr 3 crystals was compared to other scintillation crystals of similar dimensions and detection environments. Comparison of self-activity of CeBr 3 to cerium-doped lanthanum tribromide (LaBr 3 :Ce) was performed. Energy resolution and relative intrinsic efficiency were measured and are presented.

Study of magnetic properties of TGa6 with T = Ce, Pr, Nd, Tb, Ho, Dy and of solid solutions Ce(Ga1-x Alx)2

International Nuclear Information System (INIS)

Jerjini, M.

1987-10-01

At low temperature TGa 6 compounds are ordered with a Neel temperature of about 10 K. Magnetic structures are antiferromagnetic for T = Pr or Nd or modulated for T = Tb, Ho or Dy. Ce presents an abnormal behavior in CeGa 6 . Neutron inelastic scattering allows the determination of energy levels in the crystal field of cerium ion and evidences hybridation of 4f and valence electrons. Three magnetic transitions for T 6 . Study of CeGa 6 and solid solutions. Ce(Ga (1-x) Al x ) 2 shows that aluminium insertion reinforces the Kondo effect. For x = O.1 an incommensurable structure subsists at very low temperature. CeGa 2 is ordered with 3 magnetic structures. Magnetic moment is reduced with Al. The study of crystal field by neutron scattering shows that hybridation effects are more important for the compound with x = 0.1 [fr

CE-SAM: a conversational interface for ISR mission support

Science.gov (United States)

Pizzocaro, Diego; Parizas, Christos; Preece, Alun; Braines, Dave; Mott, David; Bakdash, Jonathan Z.

2013-05-01

There is considerable interest in natural language conversational interfaces. These allow for complex user interactions with systems, such as fulfilling information requirements in dynamic environments, without requiring extensive training or a technical background (e.g. in formal query languages or schemas). To leverage the advantages of conversational interactions we propose CE-SAM (Controlled English Sensor Assignment to Missions), a system that guides users through refining and satisfying their information needs in the context of Intelligence, Surveillance, and Reconnaissance (ISR) operations. The rapidly-increasing availability of sensing assets and other information sources poses substantial challenges to effective ISR resource management. In a coalition context, the problem is even more complex, because assets may be "owned" by different partners. We show how CE-SAM allows a user to refine and relate their ISR information needs to pre-existing concepts in an ISR knowledge base, via conversational interaction implemented on a tablet device. The knowledge base is represented using Controlled English (CE) - a form of controlled natural language that is both human-readable and machine processable (i.e. can be used to implement automated reasoning). Users interact with the CE-SAM conversational interface using natural language, which the system converts to CE for feeding-back to the user for confirmation (e.g. to reduce misunderstanding). We show that this process not only allows users to access the assets that can support their mission needs, but also assists them in extending the CE knowledge base with new concepts.

Blue emitting KSCN:xCe phosphor for solid state lighting

Energy Technology Data Exchange (ETDEWEB)

Chikte, Devayani, E-mail: devi.awade@gmail.com [G.N. Khalsa College, Matunga, Mumbai 400019 (India); Omanwar, S.K. [Department of Physics, S.G.B. Amravati University, Amravati (India); Moharil, S.V. [Department of Physics, R.T.M. Nagpur University, Nagpur 440010 (India)

2014-01-15

The intense blue emitting phosphor KSCN:xCe (x=0.005, 0.01, 0.02, 0.04) is synthesized by a simple, time saving, economical method of re-crystallization through aqueous solution at 353 K. Photoluminescence measurements showed that the said phosphor exhibits emission with good intensity peaking at 450 nm corresponding to d→f transitions of Ce{sup 3+} ion. The excitation spectra monitored at 450 nm shows small peak at 282 nm and broad intense excitation band peaking at 350 nm. The latter lies in near ultraviolet (350–410 nm) emission of UV LED. The phosphor KSCN:0.02Ce{sup 3+} shows CIE 1931 color coordinates as (0.1484, 0.0602) whereas the commercial blue phosphor BAM:Eu{sup 2+} shows the color co-ordinates as (0.1417, 0.1072), respectively, indicating better color purity for KSCN: 0.02Ce{sup 3+} compared to the BAM:Eu{sup 2+} phosphor. The color coordinates of KSCN: 0.02Ce{sup 3+} phosphor (0.1484, 0.0602) are nearer to the color coordinate for blue color suggested by the color systems EBUPAL/SECAM, sRGB Blue as well as Adobe blue(0.15, 0.06). -- Highlights: • Novel phosphor KSCN:xCe prepared for the first time. • Method is simple, time saving, economical, easy to handle. • Intense, blue, Characteristic Ce{sup 3+} emission at 450 nm. • nUV excitation, suitable for solid state lighting.

Levels in 146Ce and the N = 88 isotones

International Nuclear Information System (INIS)

Gowdy, G.M.; Chrien, R.E.; Chu, Y.Y.

1981-01-01

An investigation of the level structure of 146 Ce following the beta decay of the low-spin isomer of 146 La has been carried out at the ISOL facility TRISTAN at Brookhaven National Laboratory. The half-life for the low spin isomer was found to be 6.0 +- 0.4s. A partial level scheme for 146 Ce below 2 MeV is given. The level energies and some B(E2) values extracted from our data have been compared with IBA-2 calculations done entirely with extrapolated parameters from neighboring Z nuclei in order to check the predictive power of the model. Systematics of the Z = 58 isotopes and N = 88 isotones indicate that although 146 Ce is more deformed than its isotones with Z greater than or equal to 60, the transition to the well-deformed region can probably more correctly be thought to occur after 146 Ce, between N = 88 and N = 90, as it does for Z greater than or equal to 60. The abrupt onset of deformation present in the higher Z isotopes is not seen in the Ce isotopes where the trend is found to be rather smooth throughout

Nanocrystalline Mn-Mo-Ce Oxide Anode Doped Rare Earth Ce and Its Selective Electro-catalytic Performance

Directory of Open Access Journals (Sweden)

SHI Yan-hua

2017-09-01

Full Text Available The anode oxide of nanocrystalline Mn-Mo-Ce was prepared by anode electro-deposition technology, and its nanostructure and selective electro-catalytic performance were investigated using the SEM, EDS, XRD, HRTEM, electrochemical technology and oxygen evolution efficiency testing. Furthermore, the selective electro-catalytic mechanism of oxygen evolution and chlorine depression was discussed. The results show that the mesh-like nanostructure Mn-Mo-Ce oxide anode with little cerium doped is obtained, and the oxygen evolution efficiency for the anode in the seawater is 99.51%, which means a high efficiency for the selective electro-catalytic for the oxygen evolution. Due to the structural characteristics of γ-MnO2, the OH- ion is preferentially absorbed, while Cl- absorption is depressed. OH- accomplishes the oxygen evolution process during the valence transition electrocatalysis of Mn4+/Mn3+, completing the selective electro-catalysis process. Ce doping greatly increases the reaction activity, and promotes the absorption and discharge; the rising interplanar spacing between active (100 crystalline plane promotes OH- motion and the escape of newborn O2, so that the selective electro-catalytic property with high efficient oxygen evolution and chlorine depression is achieved from the nano morphology effect.

Effects of Surfactants on the Performance of CeO2 Humidity Sensor

Directory of Open Access Journals (Sweden)

Chunjie Wang

2014-01-01

Full Text Available Nanosized CeO2 powders were synthesized via hydrothermal method with different types of surfactants (polyethylene glycol (PEG, cetyltrimethylammonium bromide (CTAB, and sodium dodecylbenzenesulfonate (SDBS. X-ray diffraction, Raman spectroscopy, and transmission electron microscopy were utilized to characterize the phase structures and morphologies of the products. The sample with CTAB as surfactant (CeO2-C has the largest specific surface area and the smallest particle size among these three samples. The humidity sensor fabricated by CeO2-C shows higher performance than those used CeO2-P and CeO2-S. The impedance of the CeO2-C sensor decreases by about five orders of magnitude with relative humidity (RH changing from 15.7 to 95%. The response and recovery time are 7 and 7 s, respectively. These results indicate that the performance of CeO2 humidity sensors can be improved effectively by the addition of cationic surfactant.

Numerical error in electron orbits with large ωceδt

International Nuclear Information System (INIS)

Parker, S.E.; Birdsall, C.K.

1989-01-01

We have found that running electrostatic particle codes relatively large ω ce Δt in some circumstances does not significantly affect the physical results. We first present results from a single particle mover finding the correct first order drifts for large ω ce Δt. We then characterize the numerical orbit of the Boris algorithm for rotation when ω ce Δt much-gt 1. Next, an analysis of the guiding center motion is given showing why the first order drift is retained at large ω ce Δt. Lastly, we present a plasma simulation of a one dimensional cross field sheath, with large and small ω ce Δt, with very little difference in the results. 15 refs., 7 figs., 1 tab

Espaço Público e Shopping Center na Cidade Contemporânea: Novos Significados do North Shopping em Fortaleza - CE

Directory of Open Access Journals (Sweden)

Tiago Estevam Gonçalves

2012-03-01

Full Text Available Iniciar uma reflexão acerca da cidade atual nos remete à necessidade de construirmos uma análise sobre os shopping centers como espaços que tem atraído um fluxo considerável da população, ocasionando mudanças na relação dos citadinos com os espaços públicos. Nesta perspectiva, temos como objetivo analisar o North Shopping, localizado na cidade de Fortaleza, como um espaço de uso popular onde as camadas de menor poder aquisitivo podem adentrar e usufruir de seus atributos. Imbuídos de tal finalidade nosso aporte teórico fundamentou-se em Pintaudi (1992, Dantas (1995, Silva (1996 Lefebvre (1999, Carlos (2001, Gomes (2002 e Serpa (2007. Conclui-se que na cidade de Fortaleza, o North Shopping é um verdadeiro simulacro da realidade, substituindo as experiências cotidianas dos espaços públicos, configurando-se, assim, a supervalorização do espaço privado que se traveste de público tendo repercussões na nova urbanidade fortalezense.

On the response of Y 3Al 5O 12: Ce (YAG: Ce) powder scintillating screens to medical imaging X-rays

Science.gov (United States)

Kandarakis, I.; Cavouras, D.; Sianoudis, I.; Nikolopoulos, D.; Episkopakis, A.; Linardatos, D.; Margetis, D.; Nirgianaki, E.; Roussou, M.; Melissaropoulos, P.; Kalivas, N.; Kalatzis, I.; Kourkoutas, K.; Dimitropoulos, N.; Louizi, A.; Nomicos, C.; Panayiotakis, G.

2005-02-01

The aim of this study was to examine Y 3Al 5O 12:Ce (also known as YAG:Ce) powder scintillator under X-ray imaging conditions. This material shows a very fast scintillation decay time and it has never been used in X-ray medical imaging. In the present study various scintillator layers (screens) with coating thickness ranging from 13 to 166 mg/cm 2 were prepared in our laboratory by sedimentation of Y 3Al 5O 12: Ce powder. Optical emission spectra and light emission efficiency (spectrum area over X-ray exposure) of the layers were measured under X-ray excitation using X-ray tube voltages (80-120 kVp) often employed in general medical radiography and fluoroscopy. Spectral compatibility with various optical photon detectors (photodiodes, photocathodes, charge coupled devices, films) and intrinsic conversion efficiency values were determined using emission spectrum data. In addition, parameters related to X-ray detection, energy absorption efficiency and K-fluorescence characteristic emission were calculated. A theoretical model describing radiation and light transfer through scattering media was used to fit experimental data. Intrinsic conversion efficiency (η≈0.03-0.05) and light attenuation coefficients (σ≈26.5 cm/g) were derived through this fitting. Y 3Al 5O 12:Ce showed peak emission in the wavelength range 530-550 nm. The light emission efficiency was found to be maximum for the 107 mg/cm 2 layer. Due to its "green" emission spectrum, Y 3Al 5O 12:Ce showed excellent compatibility (of the order of 0.9) with the sensitivity of many currently used photodetectors. Taking into account its very fast response Y 3Al 5O 12:Ce could be considered for application in X-ray imaging especially in various digital detectors.

On the response of Y3Al5O12: Ce (YAG: Ce) powder scintillating screens to medical imaging X-rays

International Nuclear Information System (INIS)

Kandarakis, I.; Cavouras, D.; Sianoudis, I.; Nikolopoulos, D.; Episkopakis, A.; Linardatos, D.; Margetis, D.; Nirgianaki, E.; Roussou, M.; Melissaropoulos, P.; Kalivas, N.; Kalatzis, I.; Kourkoutas, K.; Dimitropoulos, N.; Louizi, A.; Nomicos, C.; Panayiotakis, G.

2005-01-01

The aim of this study was to examine Y 3 Al 5 O 12 :Ce (also known as YAG:Ce) powder scintillator under X-ray imaging conditions. This material shows a very fast scintillation decay time and it has never been used in X-ray medical imaging. In the present study various scintillator layers (screens) with coating thickness ranging from 13 to 166mg/cm 2 were prepared in our laboratory by sedimentation of Y 3 Al 5 O 12 : Ce powder. Optical emission spectra and light emission efficiency (spectrum area over X-ray exposure) of the layers were measured under X-ray excitation using X-ray tube voltages (80-120kVp) often employed in general medical radiography and fluoroscopy. Spectral compatibility with various optical photon detectors (photodiodes, photocathodes, charge coupled devices, films) and intrinsic conversion efficiency values were determined using emission spectrum data. In addition, parameters related to X-ray detection, energy absorption efficiency and K-fluorescence characteristic emission were calculated. A theoretical model describing radiation and light transfer through scattering media was used to fit experimental data. Intrinsic conversion efficiency (ηC ∼0.03-0.05) and light attenuation coefficients (σ∼26.5cm 2 /g) were derived through this fitting. Y 3 Al 5 O 12 :Ce showed peak emission in the wavelength range 530-550nm. The light emission efficiency was found to be maximum for the 107mg/cm 2 layer. Due to its 'green' emission spectrum, Y 3 Al 5 O 12 :Ce showed excellent compatibility (of the order of 0.9) with the sensitivity of many currently used photodetectors. Taking into account its very fast response Y 3 Al 5 O 12 :Ce could be considered for application in X-ray imaging especially in various digital detectors

Oxidative Ce"3"+ sequestration by fungal manganese oxides with an associated Mn(II) oxidase activity

International Nuclear Information System (INIS)

Zheng, Haisu; Tani, Yukinori; Naitou, Hirotaka; Miyata, Naoyuki; Tojo, Fuyumi

2016-01-01

Sequestration of Ce"3"+ by biogenic manganese oxides (BMOs) formed by a Mn(II)-oxidizing fungus, Acremonium strictum strain KR21-2, was examined at pH 6.0. In anaerobic Ce"3"+ solution, newly formed BMOs exhibited stoichiometric Ce"3"+ oxidation, where the molar ratio of Ce"3"+ sequestered (Ce_s_e_q) relative to Mn"2"+ released (Mn_r_e_l) was maintained at approximately two throughout the reaction. A similar Ce"3"+ sequestration trend was observed in anaerobic treatment of BMOs in which the associated Mn(II) oxidase was completely inactivated by heating at 85 °C for 1 h or by adding 50 mM NaN_3. Aerobic Ce"3"+ treatment of newly formed BMO (enzymatically active) resulted in excessive Ce"3"+ sequestration over Mn"2"+ release, yielding Ce_s_e_q/Mn_r_e_l > 200, whereas heated or poisoned BMOs released a significant amount of Mn"2"+ with lower Ce"3"+ sequestration efficiency. Consequently, self-regeneration by the Mn(II) oxidase in newly formed BMO effectively suppressed Mn"2"+ release and enhanced oxidative Ce"3"+ sequestration under aerobic conditions. Repeated treatments of heated or poisoned BMOs under aerobic conditions confirmed that oxidative Ce"3"+ sequestration continued even after most Mn oxide was released from the solid phase, indicating auto-catalytic Ce"3"+ oxidation at the solid phase produced through primary Ce"3"+ oxidation by BMO. From X-ray diffraction analysis, the resultant solid phases formed through Ce"3"+ oxidation by BMO under both aerobic and anaerobic conditions consisted of cerianite with crystal sizes of 5.00–7.23 Å. Such nano-sized CeO_2 (CeO_2_,_B_M_O) showed faster auto-catalytic Ce"3"+ oxidation than that on well-crystalized cerianite under aerobic conditions, where the normalized pseudo-first order rate constants for auto-catalytic Ce"3"+ oxidation on CeO_2_,_B_M_O was two orders of magnitude higher. Consequently, we concluded that Ce"3"+ contact with BMOs sequesters Ce"3"+ through two oxidation paths: primary Ce"3

The Fermi surface of CeSb

International Nuclear Information System (INIS)

Crabtree, G.W.; Aoki, H.; Joss, W.; Hulliger, F.

1987-01-01

This paper uses accurate Fermi surface measurements as a test of hybridization models in CeSb. Detailed measurements of the Fermi surface geometry and effective masses are presented which show a number of unusual properties associated with the magnetic structure and anisotropy. Measurements are compared with predictions of a band structure in which the f-electron is assumed to be local, interacting with the conduction electrons only through anisotropic Coulomb and exchange interactions. This model reproduces all the unusual features observed in the measurements and suggests that hybridization is not essential to describing the electronic properties of CeSb

Photoluminescence analysis of Ce3+:Zn2SiO4 & Li++ Ce3+:Zn2SiO4: phosphors by a sol-gel method

Science.gov (United States)

Babu, B. Chandra; Vandana, C. Sai; Guravamma, J.; Rudramadevi, B. Hemalatha; Buddhudu, S.

2015-06-01

Here, we report on the development and photoluminescence analysis of Zn2SiO4, Ce3+:Zn2SiO4 & Li+ + Ce3+: Zn2SiO4 novel powder phosphors prepared by a sol-gel technique. The total amount of Ce3+ ions was kept constant in this experiment at 0.05 mol% total doping. The excitation and emission spectra of undoped (Zn2SiO4) and Ce3+ doped Zn2SiO4 and 0.05 mol% Li+ co-doped samples have been investigated. Cerium doped Zn2SiO4 powder phosphors had broad blue emission corresponding to the 2D3/2→2FJ transition at 443nm. Stable green-yellow-red emission has been observed from Zn2SiO4 host matrix and also we have been observed the enhanced luminescence of Li+ co-doped Zn2SiO4:Ce3+. Excitation and emission spectra of these blue luminescent phosphors have been analyzed in evaluating their potential as luminescent screen coating phosphors.

Intermediate Ce{sup 3+} defect level induced photoluminescence and third-order nonlinear optical effects in TiO{sub 2}-CeO{sub 2} nanocomposites

Energy Technology Data Exchange (ETDEWEB)

Divya, S.; Nampoori, V.P.N.; Radhakrishnan, P.; Mujeeb, A. [Cochin University of Science and Technology, International School of Photonics, Cochin, Kerala (India)

2014-02-15

We report on the linear and nonlinear optical studies of TiO{sub 2}-CeO{sub 2} nanocomposites. It was found that the band gap of the nanocomposite can be tuned by varying Ce/Ti content. Nonlinear absorption characteristics of these samples were studied by employing open aperture Z-scan technique using an Nd:YAG laser (532 nm, 7 ns, 10 Hz). It has been observed that as the CeO{sub 2} amount increases, band gap of the nanocomposites decreases and the reason proposed for the change in band gap is the smudging of localised states of Ce{sup 3+} into the forbidden energy gap, thus acting as the intermediate state. Fluorescence studies confirmed the above argument. Nonlinear investigation revealed that with increase in the CeO{sub 2} amount, the two-photon absorption coefficient increased due to the modification of TiO{sub 2} dipole symmetry. Suitable candidature of the nanocomposites for the fabrication of nonlinear optical devices was proved by determining the optical limiting threshold. (orig.)

/sup 144/Ce in tissue of beagle dogs after inhalation of CeCl/sub 3/ with special emphasis on endocrine glands and reproductive organs

Energy Technology Data Exchange (ETDEWEB)

Cuddihy, R G; Boecker, B B; McClellan, R O; Kanapilly, G M [Lovelace Foundation for Medical Education and Research, Albuquerque, N.Mex. (USA)

1976-01-01

Beagle dogs inhaled aerosols containing /sup 144/CeCl/sub 3/. Deposition of /sup 144/Ce in tissues was determined in serially sacrificed dogs to characterize radiation dose patterns at early times after exposure. Uptakes of /sup 144/Ce in endocrine glands and reproductive organs were also measured; radiation doses were calculated and those doses were compared with the doses to the major organs of deposition - lung, liver and skeleton. Integrated radiation doses in pituitary and adrenal glands, pancreas, ovaries, testes, prostate and uterus were less than 2 % of those in lung and liver, while the thyroid dose was about 30 % of the dose in liver. These findings were consistent with previously reported biological responses in beagle dogs exposed to high levels of /sup 144/CeCl/sub 3/ wherein no radiation effects related to endocrine glands or the reproductive system have been observed. Use of these results in predicting the dosimetry of /sup 144/Ce in exposed humans re-emphasized the importance of radiation damage to lung, liver, skeleton and gastrointestinal tract compared to other organ systems.

Nonstoichiometry and stability in water of undoped SrCeO3

Directory of Open Access Journals (Sweden)

Jurado, J. R.

2003-10-01

Full Text Available Strontium cerate is the parent phase of an important class of proton-conducting perovskites with various potential technological applications. Phase formation and structure of SrCeO3 with Sr:Ce nonstoichiometry have been investigated for the series, Sr1±xCeO3±δ (0.98 ≤ x ≤ 1.04. Analyses by EPMA (electron probe micro analysis and X-ray diffraction (XRD indicate that, for samples sintered at 1350°C, the main phase is Sr-rich for all x. The accommodation of excess SrO in the bulk phase and/or intergranular regions is discussed. The stability of nominally stoichiometric SrCeO3 was examined in an atmosphere of high water vapour partial pressure (pH2O for 2 hours, degrading to Sr(OH2.H2O and CeO2 for pH2O ≥ 3.6atm.La fase SrCeO3 da origen a una importante familia de perovskitas conductoras protónicas con potenciales aplicaciones tecnológicas. En este trabajo se estudia la formación de la fase y la estructura de SrCeO3 con la relación Sr:Ce no estequiométrica para la serie Sr1±xCeO3±δ (0.98 ≤ x ≤ 1.04. Los análisis por microsonda (EPMA y difracción de rayos X (DRX indican que en las muestras sinterizadas a 1350°C, la fase principal es rica en estroncio para todo valor de x. Se discute la posible ubicación del exceso de SrO tanto en la región intergranular como en el propio grano. También se examina la estabilidad de la composición con estequiometría nominal SrCeO3 en una atmosfera con una alta presión de vapor de agua (pH2O, observándose que la degradación a Sr(OH2.H2O y CeO2 ocurre a pH2O ≥ 3.6atm (expuesto durante 2 horas.

Synthesis, characterization, and ecotoxicity of CeO{sub 2} nanoparticles with differing properties

Energy Technology Data Exchange (ETDEWEB)

Alam, Bushra [Aero Shade Technologies Inc (United States); Philippe, Allan, E-mail: philippe@uni-landau.de; Rosenfeldt, Ricki R.; Seitz, Frank [University of Koblenz-Landau, Group of Environmental and Soil Chemistry, Institute for Environmental Sciences (Germany); Dey, Sonal [SUNY Polytechnic Institute, Colleges of Nanoscale Science and Engineering (United States); Bundschuh, Mirco; Schaumann, Gabriele E. [University of Koblenz-Landau, Group of Environmental and Soil Chemistry, Institute for Environmental Sciences (Germany); Brenner, Sara A. [SUNY Polytechnic Institute, Colleges of Nanoscale Science and Engineering (United States)

2016-10-15

CeO{sub 2} nanoparticles with various characteristics find an increasing number of applications in the electronic, medical, and other industries and are therefore likely released in the environment. This calls for investigations linking the physicochemical properties of these particles with their potential environmental impacts. In this study, CeO{sub 2} nanoparticle powders were prepared using three different precursors [Ce(NO{sub 3}){sub 3}, CeCl{sub 3}, and Ce(CH{sub 3}COO){sub 3}] and annealing temperatures (300, 500, and 700 °C). This procedure resulted in nine different types of nanoparticles with differing size (5–90 nm), morphology, surface Ce{sup 3+}/Ce{sup 4+} ratio, and slightly different crystal structures as characterized using transmission electron microscopy, dynamic light scattering, X-ray photoelectron spectroscopy, and X-ray diffraction measurements with Rietveld refinement. These CeO{sub 2} nanoparticles underwent toxicity testing at concentrations up to 64 mg L{sup −1} using Daphnia magna. Toxic effects were observed for three particle types with EC50 values between 5 and 64 mg L{sup −1}. No clear correlation was observed between the physicochemical properties (size, shape, oxygen occupancy, Ce{sup 3+}/Ce{sup 4+} ratio) of the nanoparticles and their toxicity. However, toxicity was correlated with the amount of Ce remaining suspended in the test medium after 24 h. This indicated that toxic effects may depend on the colloidal stability of CeO{sub 2} nanoparticles during the first day of exposure. Therefore, being readily suspended and remaining stable for several days in the aquatic media increases the likelihood that CeO{sub 2} nanoparticles will cause unwanted adverse effects.

Luminescence properties of LiPrxCe1-xP4O12

International Nuclear Information System (INIS)

Shalapska, T.; Stryganyuka, G.; Trotsc, D.; Demkiv, T.; Gektin, A.; Voloshinovskii, A.; Dorenbos, P.

2010-01-01

LiPr 1-x Ce x P 4 O 12 (x=0, 0.002, 0.02; 0.1) powder samples were prepared using the melt solution technique. Luminescent parameters of LiPr 1-x Ce x P 4 O 12 phosphors have been investigated under ultraviolet-vacuum ultraviolet (3-12 eV) synchrotron radiation and X-rays excitation at room and near liquid He temperatures. Excitation luminescence spectra of Ce 3+ emission, luminescent spectra and decay curves from the lower excited state levels of the 4f 1 5d 1 and 5d 1 electronic configuration of the Pr 3+ and Ce 3+ , respectively, clearly indicate energy transfer from Pr 3+ to Ce 3+ . Energy migration proceeds via the Pr-sublattice followed by nonradiation transfer from Pr 3+ to Ce 3+ ions.

Ethylene Glycol Adsorption and Reaction over CeOX(111) Thin Films

Energy Technology Data Exchange (ETDEWEB)

T Chen; D Mullins

2011-12-31

This study reports the interaction of ethylene glycol with well-ordered CeO{sub x}(111) thin film surfaces. Ethylene glycol initially adsorbs on fully oxidized CeO{sub 2}(111) and reduced CeO{sub 2-x}(111) through the formation of one C-O-Ce bond and then forms a second alkoxy bond after annealing. On fully oxidized CeO{sub 2}(111) both recombination of ethylene glycol and water desorption occur at low temperature leaving stable -OCH{sub 2}CH{sub 2}O- (ethylenedioxy) intermediates and oxygen vacancies on the surface. This ethylenedioxy intermediate goes through C-C bond scission to produce formate species which then react to produce CO and CO{sub 2}. The formation of water results in the reduction of the ceria. On a reduced CeO{sub 2-x}(111) surface the reaction selectivity shifts toward a dehydration process. The ethylenedioxy intermediate decomposes by breaking a C-O bond and converts into an enolate species. Similar to the reaction of acetaldehyde on reduced CeO{sub 2-x}(111), the enolate reacts to produce acetaldehyde, acetylene, and ethylene. The loss of O from ethylene glycol leads to a small amount of oxidation of the reduced ceria.

Novel hydrogen decrepitation behaviors of (La, Ce)-Fe-B strips

Science.gov (United States)

Jin, Jiaying; Bai, Guohua; Zhang, Yujing; Peng, Baixing; Liu, Yongsheng; Ma, Tianyu; Yan, Mi

2018-05-01

La and Ce substitution for Nd in the 2:14:1-type sintered magnet is of commercial interest to reduce the material cost and to balance the utilization of rare earth (RE) sources. As hydrogen decrepitation (HD) is widely utilized to prepare the magnetic powders during magnets fabrication, incorporating La and Ce into the Nd-Fe-B permanent magnets, however, may exert complex influences on the decrepitation behavior. In the present work, through a comparative study of the HD behaviors between the (La, Ce)-Fe-B strips and the conventional Nd-Fe-B ones, we find that similar to the Nd-Fe-B system, increasing hydrogen pressures from 2.5 to 5.5 MPa do not break the 2:14:1 tetragonal structure of (La, Ce)-Fe-B strips. The enhanced hydrogen absorption behaviors are observed with increasing pressure, which are still inferior to that of the Nd-Fe-B strips. This should be ascribed to the higher oxygen affinity of La and Ce than that of Nd, leading to the decreased amount of active RE-rich phase and limited hydrogen diffusion channel. As a result, the hydrogen absorption of 2:14:1 matrix phase is significantly suppressed, dramatically weakening the exothermic effect. This finding suggests that La and Ce with stable 2:14:1 tetragonal structure upon HD process are promising alternatives for Nd, despite that more precise oxygen control is necessary for the microstructure modification and magnetic performance enhancement of (La, Ce)-Fe-B sintered magnets.

Investigation into kinetics of redox interaction in the system Ce(4). beta. -diketonate-additional ligand

Energy Technology Data Exchange (ETDEWEB)

Anufrieva, S.I.; Snezhko, N.I.; Pechurova, N.I.; Martynenko, L.N.; Spitsyn, V.I. (Moskovskij Gosudarstvennyj Univ. (USSR))

1981-07-01

The rate of reduction of ..beta..-diketonate complexes of Ce(4) to Ce(3) ..beta..-diketonates in benzene solution in the presence and in the absence of additional ligands is studied using spectrophotometry. The rate of reduction of Ce(4) ..beta..-diketonates increases in the series Ce(TTFA)/sub 4/<Ce(DPM)/sub 4/<Ce(DBM)/sub 4/<Ce(BA)/sub 4/<Ce(AA)/sub 4/ (TTFA - thenoyltrifluoroacetone, DPM- --dipivaloylmethane, DBM - dibenzoylmethane, BA benzoylacetone, AA - acetylacetone). The studied phosphorus-containing additional ligands as to their effect on the rate of Ce (4) reduction can be arranged in the following order: trioctylphosphine oxide>triphenylphosphine oxide>tributyl phosphate.

Non-aqueous CE-MS of cinchona alkaloids - characterizationof a novel CE-ESI-MS interface

DEFF Research Database (Denmark)

Hansen, Frederik André; Hansen, Steen Honoré; Petersen, Nickolaj J.

We have recently in our group at the University of Copenhagen developed a robust and simple sheatless CE-ESI-MS interface (capillary electrophoresis – electrospray ionization-mass spectrometry). In this presentation the interface is characterized and compared with HPLC-MS for studying...... a submicron fracture in the capillary close the ESI tip. The fracture provides a zero dead volume and excellent conducting properties due to the large amount of ions in the electric double layer. Electric current exceeding the upper limit of CE instrumentation of up to 300 µA can easily be obtained....... Furthermore, the increased conductivity of the buffer in the fracture generates field free pumping of the analytes towards the ESI spray tip. In this study the device was used to analyze the four major alkaloids (diastereomeric pairs of quinine/quinidine and cinchonine/cinchonidine) in Cinchona bark samples...

Magnetism and superconductivity of CePt3Si and Ce1+xPt3+ySi1+z

International Nuclear Information System (INIS)

Motoyama, Gaku; Yamamoto, Suguru; Takezoe, Hiroaki; Oda, Yasukage; Ueda, Ko-ichi; Kohara, Takao

2006-01-01

We measured the dc magnetization, electrical resistivity, and ac magnetic susceptibility of a series of polycrystalline CePt 3 Si samples whose compositions vary slightly from the stoichiometric composition. The sample that showed the most distinct anitiferromagnetic transition at 2.2K was found to be Ce 1.01 Pt 3 Si annealed. This sample showed a clear bulk antiferromagnetic order at 2.2 K even in both electrical resistivity and dc magnetization measurements, although the characteristic change in dc magnetization at 2.2 K was found to be small and to be easily masked in other magnetic anomalies if they exist. Moreover, it had the largest residual resistivity ratio. We concluded that Ce 1.01 Pt 3 Si annealed has the intrinsic bulk properties of ideal CePt 3 Si. In addition, we revealed that some anomalies arise as a result of the variation in composition. One is a ferromagnetic anomaly at 3.0 K in the Pt-rich samples, and the other is an antiferromagnetic anomaly at 4.0 K in the Pt-poor samples. The two magnetic anomalies seemed to appear in small domains in the samples that exhibited an antiferromagnetic order at 2.2 K. To reveal the relationship between these magnetisms and superconductivity, we measured ac magnetic susceptibility down to ∼14mK. We found that the superconducting transition temperature is suppressed by the ferromagnetic anomaly. (author)

Properties of Ce-doped ITO films deposited on polymer substrate by DC magnetron sputtering

International Nuclear Information System (INIS)

Kang, Y.M.; Kwon, S.H.; Choi, J.H.; Cho, Y.J.; Song, P.K.

2010-01-01

Ce-doped indium tin oxide (ITO:Ce) films were deposited on flexible polyimide substrates by DC magnetron sputtering using ITO targets containing various CeO 2 contents (CeO 2 : 0, 0.5, 3.0, 4.0, 6.0 wt.%) at room temperature and post-annealed at 200 o C. The crystallinity of the ITO films decreased with increasing Ce content, and it led to a decrease in surface roughness. In addition, a relatively small change in resistance in dynamic stress mode was obtained for ITO:Ce films even after the annealing at high temperature (200 o C). The minimum resistivity of the amorphous ITO:Ce films was 3.96 x 10 -4 Ωcm, which was deposited using a 3.0 wt.% CeO 2 doped ITO target. The amorphous ITO:Ce films not only have comparable electrical properties to the polycrystalline films but also have a crystallization temperature > 200 o C. In addition, the amorphous ITO:Ce film showed stable mechanical properties in the bended state.

Room-temperature ferromagnetism in pure and Co doped CeO2 powders

International Nuclear Information System (INIS)

Wen Qiye; Zhang Huaiwu; Song Yuanqiang; Yang Qinghui; Zhu Hao; Xiao, John Q

2007-01-01

We report the room-temperature (RT) ferromagnetism (FM) observed in pure and Co doped CeO 2 powder. An insulating nonmagnetic CeO 2 single crystal, after grinding into fine powder, shows an RT-FM with a small magnetization of 0.0045 emu g -1 . However, the CeO 2 powder became paramagnetic after oxygen annealing, which strongly suggests an oxygen vacancy meditated FM ordering. Furthermore, by doping Co into CeO 2 powder the FM can significantly enhance through a F-centre exchange (FCE) coupling mechanism, in which both oxygen vacancies and magnetic ions are involved. As the Co content increases, the FM of Co doped CeO 2 initially increases to a maximum 0.47 emu g -1 , and then degrades very quickly. The complex correlation between the Co content and saturation magnetization was well interpreted by supposing the coexistence of three subsets of Co ions in CeO 2 . Our results reveal that the large RT-FM observed in Co doped CeO 2 powder originates from a combination effect of oxygen vacancies and transition metal doping

Structure and Spatial Distribution of the Chironomidae Community in Mesohabitats in a First Order Stream at the Poço D'Anta Municipal Biological Reserve in Brazil

Science.gov (United States)

Vescovi Rosa, Beatriz Figueiraujo Jabour; de Oliveira, Vívian Campos; Alves, Roberto da Gama

2011-01-01

The Chironomidae occupy different habitats along the lotic system with their distribution determined by different factors such as the substrate characteristics and water speed. The input of vegetable material from the riparian forest allows a higher habitat diversity and food to the benthic fauna. The main aim of this paper is to verify the structure and spatial distribution of the Chironomidae fauna in different mesohabitats in a first order stream located at a Biological Reserve in the southeast of Brazil. In the months of July, August, and September 2007, and in January, February, and March 2008, samples were collected with a hand net (250 µm) in the following mesohabitats: litter from riffles, litter from pools, and sediment from pools. The community structure of each mesohabitat was analyzed through the abundance of organisms, taxa richness, Pielou's evenness, Shannon's diversity, and taxa dominance. Similarity among the mesohabitats was obtained by Cluster analysis, and Chironomidae larvae distribution through the Correspondence analysis. Indicator species analysis was used to identify possible taxa preference for a determined mesohabitat. The analyzed mesohabitats showed high species richness and diversity favored by the large environmental heterogeneity. Some taxa were indicators of the type of mesohabitat. The substrate was the main factor that determined taxa distribution in relation to water flow differences (riffle and pool). Stream characteristics such as low water speed and the presence of natural mechanisms of retention may have provided a higher faunistic similarity between the areas with different flows. The results showed that the physical characteristics of each environment presented a close relationship with the structure and spatial distribution of the Chironomidae fauna in lotic systems. PMID:21529258

Mechanochemical synthesis of ultrafine Ce2S3 powder

International Nuclear Information System (INIS)

Tsuzuki, T.; McCormick, P.G.

1998-01-01

Full text: Rare earth sulphides have been receiving an increasing attraction for various applications including infrared window materials and magneto-optical devices. In particular, Ce 2 S 3 has been under intensive study for use as a red pigment to replace toxic cadmium sulfoselenide. The conventional method for synthesising Ce 2 S 3 is the sulphidization of the element or sesquioxide with hydrogen sulphide gas. However, the method usually requires a high-temperature process (>1000 deg C), and hence coarse particles larger than the optimal size of ∼ 2 S 3 powder by mechanochemical processing using X-ray diffraction spectroscopy, BET surface area analysis and transmission electron microscopy. Mechanical milling of the mixture of a cerium salt and an alkali/alkali-earth sulphide powders led to a solid state displacement reaction in a steady-state manner, forming Ce 2 S 3 nanoparticles in a salt by-product matrix. After a simple washing process to remove the salt by-product, ultrafine Ce 2 S 3 particles with sizes of 20 - 200 nm having an orthorhombic structure were obtained. Using a diluent and mechanically alloyed CaS nanoparticles in the starting powder, particles of only a cubic γ-Ce 2 S 3 phase with sizes of 10 - 80 nm were formed

Aptian sedimentation in the Recôncavo-Tucano-Jatobá Rift System and its tectonic and paleogeographic significance

Science.gov (United States)

Freitas, Bernardo T.; Almeida, Renato P.; Carrera, Simone C.; Figueiredo, Felipe T.; Turra, Bruno B.; Varejão, Filipe G.; Assine, Mario L.

2017-12-01

This study, based on detailed sedimentologic and stratigraphic analysis of the Aptian succession preserved in the Recôncavo-Tucano-Jatobá Rift System (RTJ), present new elements for biostratigraphic correlation and paleogeographic reconstruction in the mid-Cretaceous South Atlantic realm, supporting novel interpretations on the tectonic and sedimentary evolution related to the W-Gondwana breakup. The Aptian sedimentary succession in the RTJ has been referred to as Marizal Formation, and interpreted as post-rift deposits. Detailed sedimentologic and stratigraphic studies of these deposits enabled the recognition and individualization of two distinctive sedimentary units that can be traced in the entire RTJ. These units are here described and named Banzaê and Cícero Dantas members of the Marizal Formation. Their contact is locally marked by the fossiliferous successions of the here proposed Amargosa Bed, lying at the top of the Banzaê Member. Both members of the Marizal Formation record large river systems captured by the Tucano Basin with the local development of eolian dune fields and fault-bounded alluvial fans. The Amargosa Bed represents a regional-scale base level change preserved between the Aptian fluvial successions along the RTJ. Hence, the studied sedimentary record presents important implications for the timing and direction of marine ingressions affecting NE-Brazil interior basins during the Aptian. A remarkable contrast in preserved fluvial architecture between the Banzaê Member, characterized by connected channel bodies, and the Cícero Dantas Member, characterized by isolated channel bodies within overbank fines, is here reported. The main interpreted control for the observed contrast in fluvial stratigraphy is sedimentary yield variation. The interval is also subject to the interpretation of a regional shift in the mechanism responsible for the subsidence of the basins formed during the Cretaceous break-up of the Central South Atlantic. This

Luminescence Properties of Ca19Ce(PO4)14:A (A = Eu3+/Tb3+/Mn2+) Phosphors with Abundant Colors: Abnormal Coexistence of Ce4+/3+-Eu3+ and Energy Transfer of Ce3+ → Tb3+/Mn2+ and Tb3+-Mn2.

Science.gov (United States)

Shang, Mengmeng; Liang, Sisi; Lian, Hongzhou; Lin, Jun

2017-06-05

A series of Eu 3+ /Tb 3+ /Mn 2+ -ion-doped Ca 19 Ce(PO 4 ) 14 (CCPO) phosphors have been prepared via the conventional high-temperature solid-state reaction process. Under UV radiation, the CCPO host presents a broad blue emission band from Ce 3+ ions, which are generated during the preparation process because of the formation of deficiency. The Eu 3+ -doped CCPO phosphors can exhibit magenta to red-orange emission as a result of the abnormal coexistence of Ce 3+ /Ce 4+ /Eu 3+ and the metal-metal charge-transfer (MMCT) effect between Ce 3+ and Eu 3+ . When Tb 3+ /Mn 2+ are doped into the hosts, the samples excited with 300 nm UV light present multicolor emissions due to energy transfer (ET) from the host (Ce 3+ ) to the activators with increasing activator concentrations. The emitting colors of CCPO:Tb 3+ phosphors can be tuned from blue to green, and the CCPO:Mn 2+ phosphors can emit red light. The ET mechanism from the host (Ce 3+ ) to Tb 3+ /Mn 2+ is demonstrated to be a dipole-quadrapole interaction for Ce 3+ → Tb 3+ and an exchange interaction for Ce 3+ → Mn 2+ in CCPO:Tb 3+ /Mn 2+ . Abundant emission colors containing white emission were obtained in the Tb 3+ - and Mn 2+ -codoped CCPO phosphors through control of the levels of doped Tb 3+ and Mn 2+ ions. The white-emitted CCPO:Tb 3+ /Mn 2+ phosphor exhibited excellent thermal stability. The photoluminescence properties have shown that these materials might have potential for UV-pumped white-light-emitting diodes.

CE microchips: an opened gate to food analysis.

Science.gov (United States)

Escarpa, Alberto; González, María Cristina; Crevillén, Agustín González; Blasco, Antonio Javier

2007-03-01

CE microchips are the first generation of micrototal analysis systems (-TAS) emerging in the miniaturization scene of food analysis. CE microchips for food analysis are fabricated in both glass and polymer materials, such as PDMS and poly(methyl methacrylate) (PMMA), and use simple layouts of simple and double T crosses. Nowadays, the detection route preferred is electrochemical in both, amperometry and conductivity modes, using end-channel and contactless configurations, respectively. Food applications using CE microchips are now emerging since food samples present complex matrices, the selectivity being a very important challenge because the total integration of analytical steps into microchip format is very difficult. As a consequence, the first contributions that have recently appeared in the relevant literature are based primarily on fast separations of analytes of high food significance. These protocols are combined with different strategies to achieve selectivity using a suitable nonextensive sample preparation and/or strategically choosing detection routes. Polyphenolic compounds, amino acids, preservatives, and organic and inorganic ions have been studied using CE microchips. Thus, new and exciting future expectations arise in the domain of food analysis. However, several drawbacks could easily be found and assumed within the miniaturization map.

32 CFR Appendix B to Part 247 - CE Publications

Science.gov (United States)

2010-07-01

... dining at a restaurant or attending a musical performance) of a commercial organization whose primary... potentially become the CE contractor. Upon evaluation of the competing proposals by the Source Selection Advisory Committee (SSAC) and selection of a winner by the selecting official, the CE contract shall be...

Diffusion of hydrogen in Pd-(Ce, Y, B) alloys

International Nuclear Information System (INIS)

Sakamoto, Y.; Kaneko, H.; Tsukahara, T.; Hirata, S.

1987-01-01

The study has been carried out to determine the diffusivity of hydrogen in Pd alloys containing Ce, Y and B in atom fractions up to θ/sub μ/ = 0.1 by an electrochemical permeation method, and to examine the lattice dilation effect on the diffusivity in these alloys. Ce and Y have been chosen because the solid solubility of both in Pd is about 13 at% in spite of the very large atomic size-factor difference between Pd and the solutes, and thus the expansion of the Pd lattice by Ce and Y is much larger than by Ag. Furthermore, it is of interest that the partial enthalpy of the dissolved hydrogen at infinite dilution ΔH 0 /sub H/ for Ce and Y is much smaller than for Pd. On the other hand, B atom also expands the Pd lattice in a way similar to Y, and sometimes B atoms may dissolve in the octahedral interstitial sites in the same way as hydrogen atoms

Preparation and characterization of Ce-doped ZnO nanofibers by an electrospinning method

Directory of Open Access Journals (Sweden)

Jong-Pil Kim

2011-02-01

Full Text Available ZnO and Ce-doped ZnO Nanofibers on (111 Pt/SiO2/Si substrates were produced using an electrospinning technique. The as-prepared composite fibres were subjected to high-temperature calcination to produce inorganic fibers. After calcining at a temperature of 500 °C, the average diameter of the ZnO and Ce-doped ZnO nanofibers were determined to be 170 nm and 225 nm, respectively. The average grain size of the ZnO and Ce-doped ZnO nanofibers were about 50 nm and 57 nm, respectively. The microstructure, chemical bonding state and photoluminescence of the produced ZnO and Ce-doped ZnO nanofibers were investigated. The Ce-doped ZnO nanofiber can be assigned to the presence of Ce ions on substitutional sites of Zn ions and the Ce3+ state from X-ray photoelectron spectra. Compared with PL spectra of ZnO nanofibers, the peak position of the UV emission of the Ce-doped ZnO nanofibers is sharply suppressed while the green emission band is highly enhanced.

Room-temperature synthesis and characterization of porous CeO{sub 2} thin films

Energy Technology Data Exchange (ETDEWEB)

Chu, Dewei; Masuda, Yoshitake; Ohji, Tatsuki; Kato, Kazumi [National Institute of Advanced Industrial Science and Technology (AIST), Anagahora, Shimoshidami, Moriyama-ku, Nagoya (Japan)

2012-01-15

CeO{sub 2} thin films with hexagonal-shaped pores were successfully prepared by a facile electrodeposition at room temperature combined with an etching process. By using electrodeposited ZnO nanorods as a soft template, the morphology, and microstructure of the CeO{sub 2} could be controlled. TEM observation indicated that as-prepared CeO{sub 2} film is composed of nanocrystals with average size of several nanometers, while XPS analysis showed the coexistence of Ce{sup 3+} and Ce{sup 4+} in the film. The photoluminescence properties of CeO{sub 2} films were measured, which showed much higher sensitivity compared to bare substrate. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Luminescence characteristics of Pb2+ centres in undoped and Ce3+-doped Lu3Al5O12 single-crystalline films and Pb2+→Ce3+ energy transfer processes

International Nuclear Information System (INIS)

Babin, V.; Gorbenko, V.; Makhov, A.; Mares, J.A.; Nikl, M.; Zazubovich, S.; Zorenko, Yu.

2007-01-01

At 4.2-350 K, the steady-state and time-resolved emission and excitation spectra and luminescence decay kinetics were studied under excitation in the 2.5-15 eV energy range for the undoped and Ce 3+ -doped Lu 3 Al 5 O 12 (LuAG) single-crystalline films grown by liquid phase epitaxy method from the PbO-based flux. The spectral bands arising from the single Pb 2+ -based centres were identified. The processes of energy transfer from the host lattice to Pb 2+ and Ce 3+ ions and from Pb 2+ to Ce 3+ ions were investigated. Competition between Pb 2+ and Ce 3+ ions in the processes of energy transfer from the LuAG crystal lattice was evidenced especially in the exciton absorption region. Due to overlap of the 3.61 eV emission band of Pb 2+ centres with the 3.6 eV absorption band of Ce 3+ centres, an effective nonradiative energy transfer from Pb 2+ ions to Ce 3+ ions takes place, resulting in the appearance of slower component in the luminescence decay kinetics of Ce 3+ centres and decrease of the Ce 3+ -related luminescence intensity

SP@CE - An SP-based programming model for consumer electronics streaming applications

NARCIS (Netherlands)

Varbanescu, Ana Lucia; Nijhuis, Maik; Escribano, Arturo González; Sips, Henk; Bos, Herbert; Bal, Henri

2007-01-01

Efficient programming of multimedia streaming applications for Consumer Electronics (CE) devices is not trivial. As a solution for this problem, we present SP@CE, a novel programming model designed to balance the specific requirements of CE streaming applications with the simplicity and efficiency

Application of CE-ICP-MS and CE-ESI-MS/MS for identification of Zn-binding ligands in Goji berries extracts.

Science.gov (United States)

Ruzik, Lena; Kwiatkowski, Piotr

2018-06-01

The identification of groups of ligands binding metals is a crucial issue for the better understanding of their bioaccessibility. In the current study, we have intended an approach for identification of Zn-binding ligands based on using capillary electrophoresis combined with inductively coupled plasma mass spectrometry (CE-ICP-MS) and tandem electrospray ionization mass spectrometry (CE-ESI-MS/MS). The approach, which featured the use of the coupling of capillary electrophoresis with inductively coupled plasma mass spectrometry allows to separate and observe zinc ions present in complexes with respect to their size and charge and to identify nine compounds with zinc isotopic profile. CE-ICP-MS provides us with information about presence of zinc species and elemental information about zinc distribution. CE-ESI-MS/MS provide us with information about the most favorable Zn binding ligands: amino acids, flavonols, stilbenoids, fenolic acids and carotenoids. The presented work is the continuation of previous studies based on using LC-ESI-MS/MS, though, now we presented a new solutions with the possibility of changing detectors without changing the separation techniques, what is important without re-optimizing the method. The new presented method allows to identify the zinc-binding ligands in shorter time. Copyright © 2018 Elsevier B.V. All rights reserved.

Scintillation properties of selected oxide monocrystals activated with Ce and Pr

Science.gov (United States)

Wojtowicz, Andrzej J.; Drozdowski, Winicjusz; Wisniewski, Dariusz; Lefaucheur, Jean-Luc; Galazka, Zbigniew; Gou, Zhenhui; Lukasiewicz, Tadeusz; Kisielewski, Jaroslaw

2006-01-01

In the last 10-15 years there has been a significant effort toward development of new, more efficient and faster materials for detection of ionizing radiation. A growing demand for better scintillator crystals for detection of 511 keV gamma particles has been due mostly to recent advances in modern imaging systems employing positron emitting radionuclides for medical diagnostics in neurology, oncology and cardiology. While older imaging systems were almost exclusively based on BGO and NaI:Tl crystals the new systems, e.g., ECAT Accel, developed by Siemens/CTI, are based on recently discovered and developed LSO (Lu 2SiO 5:Ce, Ce-activated lutetium oxyorthosilicate) crystals. Interestingly, despite very good properties of LSO, there still is a strong drive toward development of new scintillator crystals that would show even better performance and characteristics. In this presentation we shall review spectroscopic and scintillator characterization of new complex oxide crystals, namely LSO, LYSO, YAG, LuAP (LuAlO 3, lutetium aluminate perovskite) and LuYAP activated with Ce and Pr. The LSO:Ce crystals have been grown by CTI Inc (USA), LYSO:Ce, LuAP:Ce and LuYAP:Ce crystals have been grown by Photonic Materials Ltd., Scotland (PML is the only company providing large LuAP:Ce crystals on a commercial scale), while YAG:Pr and LuAP:Pr crystals have been grown by Institute of Electronic Materials Technology (Poland). All these crystals have been characterized at Institute of Physics, N. Copernicus University (Poland). We will review and compare results of measurements of radioluminescence, VUV spectroscopy, scintillation light yields, scintillation time profiles and low temperature thermoluminescence performed on these crystals. We will demonstrate that all experiments clearly indicate that there is a significant room for improvement of LuAP, LuYAP and YAG. While both Ce-activated LSO and LYSO perform very well, we also note that LuYAP:Ce, LuAP:Ce and YAG:Pr offer some

Optical properties of CeO 2 thin films

Indian Academy of Sciences (India)

Cerium oxide (CeO2) thin films have been prepared by electron beam evaporation technique onto glass substrate at a pressure of about 6 × 10-6 Torr. The thickness of CeO2 films ranges from 140–180 nm. The optical properties of cerium oxide films are studied in the wavelength range of 200–850 nm. The film is highly ...

Facile preparation of self-healing superhydrophobic CeO2 surface by electrochemical processes

Science.gov (United States)

Nakayama, Katsutoshi; Hiraga, Takuya; Zhu, Chunyu; Tsuji, Etsushi; Aoki, Yoshitaka; Habazaki, Hiroki

2017-11-01

Herein we report simple electrochemical processes to fabricate a self-healing superhydrophobic CeO2 coating on Type 304 stainless steel. The CeO2 surface anodically deposited on flat stainless steel surface is hydrophilic, although high temperature-sintered and sputter-deposited CeO2 surface was reported to be hydrophobic. The anodically deposited hydrophilic CeO2 surface is transformed to hydrophobic during air exposure. Specific accumulation of contaminant hydrocarbon on the CeO2 surface is responsible for the transformation to hydrophobic state. The deposition of CeO2 on hierarchically rough stainless steel surface produces superhydrophobic CeO2 surface, which also shows self-healing ability; the surface changes to superhydrophilic after oxygen plasma treatment but superhydrophobic state is recovered repeatedly by air exposure. This work provides a facile method for preparing a self-healing superhydrophobic surface using practical electrochemical processes.

The investigation of Ce doped ZnO crystal: The electronic, optical and magnetic properties

Science.gov (United States)

Wen, Jun-Qing; Zhang, Jian-Min; Qiu, Ze-Gang; Yang, Xu; Li, Zhi-Qin

2018-04-01

The electronic, optical and magnetic properties of Ce doped ZnO crystal have been studied by using first principles method. The research of formation energies show that Ce doped ZnO is energetically stable, and the formation energies reduce from 6.25% to 12.5% for Ce molar percentage. The energy band is still direct band gap after Ce doped, and band gap increases with the increase of Cesbnd Ce distance. The Fermi level moves upward into conduction band and the DOS moves to lower energy with the increase of Ce concentration, which showing the properties of n-type semiconductor. The calculated optical properties imply that Ce doped causes a red-shift of absorption peaks, and enhances the absorption of the visible light. The transition from ferromagnetic to antiferromagnetic has been found in Ce doped ZnO.

Building novel Ag/CeO2 heterostructure for enhancing photocatalytic activity

International Nuclear Information System (INIS)

Leng, Qiang; Yang, Dezhi; Yang, Qi; Hu, Chenguo; Kang, Yue; Wang, Mingjun; Hashim, Muhammad

2015-01-01

Highlights: • Ag nanoparticle is designed to building Schottky heterojunction on CeO 2 nanocube. • The photocatalytic activity of Ag/CeO 2 heterostructure is much enhanced. • 95.33% of MB can be effectively degraded within half an hour. • Ag as acceptor of photoelectrons blocks the recombination of electron–hole pairs. - Abstract: Stable and recyclable photocatalysts with high efficiency to degrade organic contamination are important and widely demanded under the threat of the environment pollution. Ag/CeO 2 heterostructure is designed as a photocatalyst to degrade organic dye under the simulated sunlight. The catalytic activity of CeO 2 nanocubes (NCs) to degrade methylene blue (MB) is obviously enhanced when Ag nanoparticles (NPs) are deposited on the surface of them. The weight ratio of Ag and CeO 2 in forming high efficiency catalyst, the amount of Ag/CeO 2 catalyst used in degradation process, and the dye concentration and pH value of the initial MB solution are examined systematically. 95.33% of MB can be effectively degraded within half an hour when 50 mg of Ag/CeO 2 catalyst in an optimal weight ratio of 1:3, is added to the 100 mL of MB solution (c 0 = 1 × 10 −5 mol L −1 , pH 6.2). The mechanism of the enhanced catalytic activity of Ag/CeO 2 heterostructure is discussed. The photocatalytic degradation rate is found to obey pseudo-first-order kinetics equations according to Langmuir–Hinshelwood model. The intermediate products in different stages during the degradation of MB are analyzed

An Update on Improvements to NiCE Support for RELAP-7

Energy Technology Data Exchange (ETDEWEB)

McCaskey, Alex [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Wojtowicz, Anna [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Deyton, Jordan H. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Patterson, Taylor C. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Billings, Jay Jay [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2015-01-01

The Multiphysics Object-Oriented Simulation Environment (MOOSE) is a framework that facilitates the development of applications that rely on finite-element analysis to solve a coupled, nonlinear system of partial differential equations. RELAP-7 represents an update to the venerable RELAP-5 simulator that is built upon this framework and attempts to model the balance-of-plant concerns in a full nuclear plant. This report details the continued support and integration of RELAP-7 and the NEAMS Integrated Computational Environment (NiCE). RELAP-7 is fully supported by the NiCE due to on-going work to tightly integrate NiCE with the MOOSE framework, and subsequently the applications built upon it. NiCE development throughout the first quarter of FY15 has focused on improvements, bug fixes, and feature additions to existing MOOSE-based application support. Specifically, this report will focus on improvements to the NiCE MOOSE Model Builder, the MOOSE application job launcher, and the 3D Nuclear Plant Viewer. This report also includes a comprehensive tutorial that guides RELAP-7 users through the basic NiCE workflow: from input generation and 3D Plant modeling, to massively parallel job launch and post-simulation data visualization.

Isolation and functional characterization of CE1 binding proteins

Directory of Open Access Journals (Sweden)

Yu Ji-hyun

2010-12-01

Full Text Available Abstract Background Abscisic acid (ABA is a plant hormone that controls seed germination, protective responses to various abiotic stresses and seed maturation. The ABA-dependent processes entail changes in gene expression. Numerous genes are regulated by ABA, and promoter analyses of the genes revealed that cis-elements sharing the ACGTGGC consensus sequence are ubiquitous among ABA-regulated gene promoters. The importance of the core sequence, which is generally known as ABA response element (ABRE, has been demonstrated by various experiments, and its cognate transcription factors known as ABFs/AREBs have been identified. Although necessary, ABRE alone is not sufficient, and another cis-element known as "coupling element (CE" is required for full range ABA-regulation of gene expression. Several CEs are known. However, despite their importance, the cognate transcription factors mediating ABA response via CEs have not been reported to date. Here, we report the isolation of transcription factors that bind one of the coupling elements, CE1. Results To isolate CE1 binding proteins, we carried out yeast one-hybrid screens. Reporter genes containing a trimer of the CE1 element were prepared and introduced into a yeast strain. The yeast was transformed with library DNA that represents RNA isolated from ABA-treated Arabidopsis seedlings. From the screen of 3.6 million yeast transformants, we isolated 78 positive clones. Analysis of the clones revealed that a group of AP2/ERF domain proteins binds the CE1 element. We investigated their expression patterns and analyzed their overexpression lines to investigate the in vivo functions of the CE element binding factors (CEBFs. Here, we show that one of the CEBFs, AtERF13, confers ABA hypersensitivity in Arabidopsis, whereas two other CEBFs enhance sugar sensitivity. Conclusions Our results indicate that a group of AP2/ERF superfamily proteins interacts with CE1. Several CEBFs are known to mediate defense or

Isolation and functional characterization of CE1 binding proteins.

Science.gov (United States)

Lee, Sun-ji; Park, Ji Hye; Lee, Mi Hun; Yu, Ji-hyun; Kim, Soo Young

2010-12-16

Abscisic acid (ABA) is a plant hormone that controls seed germination, protective responses to various abiotic stresses and seed maturation. The ABA-dependent processes entail changes in gene expression. Numerous genes are regulated by ABA, and promoter analyses of the genes revealed that cis-elements sharing the ACGTGGC consensus sequence are ubiquitous among ABA-regulated gene promoters. The importance of the core sequence, which is generally known as ABA response element (ABRE), has been demonstrated by various experiments, and its cognate transcription factors known as ABFs/AREBs have been identified. Although necessary, ABRE alone is not sufficient, and another cis-element known as "coupling element (CE)" is required for full range ABA-regulation of gene expression. Several CEs are known. However, despite their importance, the cognate transcription factors mediating ABA response via CEs have not been reported to date. Here, we report the isolation of transcription factors that bind one of the coupling elements, CE1. To isolate CE1 binding proteins, we carried out yeast one-hybrid screens. Reporter genes containing a trimer of the CE1 element were prepared and introduced into a yeast strain. The yeast was transformed with library DNA that represents RNA isolated from ABA-treated Arabidopsis seedlings. From the screen of 3.6 million yeast transformants, we isolated 78 positive clones. Analysis of the clones revealed that a group of AP2/ERF domain proteins binds the CE1 element. We investigated their expression patterns and analyzed their overexpression lines to investigate the in vivo functions of the CE element binding factors (CEBFs). Here, we show that one of the CEBFs, AtERF13, confers ABA hypersensitivity in Arabidopsis, whereas two other CEBFs enhance sugar sensitivity. Our results indicate that a group of AP2/ERF superfamily proteins interacts with CE1. Several CEBFs are known to mediate defense or abiotic stress response, but the physiological functions

Cerium(IV) carboxymethylcellulose (CMC−Ce ) as an efficient and ...

Indian Academy of Sciences (India)

chemsci

nucleotides (Figure 1).1,2 Many pyridine derivatives po- ... neous catalyst, no attention so far has been paid to using ... Schematic illustration of the preparation and possible structure of CMC–CeIV. ... C to constant weight to provide the ..... Purposed mechanism for CMC−CeIVcatalyzed formation of 2,4,6-triarylpyridines.

Particle-specific toxicity and bioavailability of cerium oxide (CeO{sub 2}) nanoparticles to Arabidopsis thaliana

Energy Technology Data Exchange (ETDEWEB)

Yang, Xinping; Pan, Haopeng [College of Resources and Environmental Sciences, Nanjing Agricultural University, Nanjing 210095 (China); Wang, Peng, E-mail: p.wang3@uq.edu.au [College of Resources and Environmental Sciences, Nanjing Agricultural University, Nanjing 210095 (China); The University of Queensland, School of Agriculture and Food Sciences, St. Lucia, Queensland 4072 (Australia); Zhao, Fang-Jie [College of Resources and Environmental Sciences, Nanjing Agricultural University, Nanjing 210095 (China); Rothamsted Research, Harpenden, Hertfordshire AL5 2JQ (United Kingdom)

2017-01-15

Highlights: • The phytotoxicity and uptake of CeO{sub 2} NPs were examined in Arabidopsis. • CeO{sub 2} NPs stimulated plant growth at low doses but were toxic at high doses. • The toxicity was due to the NPs per se, rather than from the dissolved Ce ions. • A similar up-translocation factor was found for CeO{sub 2} NPs, bulk CeO{sub 2} and Ce ions. - Abstract: The use of manufactured cerium oxide nanoparticles (CeO{sub 2}-NPs) in consumer products has increased markedly over the past decade, and their release into natural ecosystems is unavoidable. This study investigated the phytotoxicity and uptake of CeO{sub 2}-NPs in Arabidopsis thaliana grown in an agar medium. Although low concentrations of CeO{sub 2}-NPs had stimulatory effects on plant growth, at higher concentrations, CeO{sub 2}-NPs reduced growth and had adverse effects on the antioxidant systems and photosystem. Importantly, the toxicity resulted from the nanoparticles per se, rather than from the dissolved Ce ions. CeO{sub 2}-NPs were taken up and subsequently translocated to shoot tissues, and transmission electron microscopy (TEM) showed the presence of a large number of needle-like particle aggregations in the intercellular regions and the cytoplasm of leaf cells. The up-translocation factor to shoots was independent of the concentrations of Ce in the roots and the supplied forms of Ce (i.e. CeO{sub 2}-NPs, CeO{sub 2}-bulk, and ionic Ce), suggesting that endocytosis is likely to be a general mechanism responsible for the translocation of these Ce compounds. These findings provide important information regarding the toxicity and uptake of CeO{sub 2}-NPs in plants, which needs to be considered in environmental risk assessment for the safe use and disposal of CeO{sub 2}-NPs.

A comparative study of LaBr{sub 3}(Ce{sup 3+}) and CeBr{sub 3} based gamma-ray spectrometers for planetary remote sensing applications

Energy Technology Data Exchange (ETDEWEB)

Kozyrev, A., E-mail: kozyrev@mx.iki.rssi.ru; Mitrofanov, I.; Bakhtin, B.; Fedosov, F.; Golovin, D.; Litvak, M.; Malakhov, A.; Mokrousov, M.; Nuzhdin, I.; Sanin, A.; Tretyakov, V.; Vostrukhin, A. [Space Research Institute of the Russian Academy of Sciences (IKI), 84/32 Profsoyuznaya St., Moscow 117997 (Russian Federation); Owens, A.; Benkhoff, J. [European Space Agency, ESTEC, Keplerlaan, 2200 AG Noordwijk (Netherlands); Quarati, F. [AP, RST, FAME, Delft University of Technology, Mekelweg 15, 2629 JB Delft (Netherlands); Gonitec BV, J. Bildersstraat 60, 2596 EJ Den Haag (Netherlands); Timoshenko, G.; Shvetsov, V. [Joint Institute for Nuclear Research, Joliot-Curie 6, Dubna, Moscow Region 141980 (Russian Federation); Granja, C.; Slavicek, T.; Pospisil, S. [Institute of Experimental and Applied Physics, Czech Technical University in Prague, Horska 3a/22, 12800 Prague 2 (Czech Republic)

2016-08-15

The recent availability of large volume cerium bromide crystals raises the possibility of substantially improving gamma-ray spectrometer limiting flux sensitivities over current systems based on the lanthanum tri-halides, e.g., lanthanum bromide and lanthanum chloride, especially for remote sensing, low-level counting applications or any type of measurement characterized by poor signal to noise ratios. The Russian Space Research Institute has developed and manufactured a highly sensitive gamma-ray spectrometer for remote sensing observations of the planet Mercury from the Mercury Polar Orbiter (MPO), which forms part of ESA’s BepiColombo mission. The Flight Model (FM) gamma-ray spectrometer is based on a 3-in. single crystal of LaBr{sub 3}(Ce{sup 3+}) produced in a separate crystal development programme specifically for this mission. During the spectrometers development, manufacturing, and qualification phases, large crystals of CeBr{sub 3} became available in a subsequent phase of the same crystal development programme. Consequently, the Flight Spare Model (FSM) gamma-ray spectrometer was retrofitted with a 3-in. CeBr{sub 3} crystal and qualified for space. Except for the crystals, the two systems are essentially identical. In this paper, we report on a comparative assessment of the two systems, in terms of their respective spectral properties, as well as their suitability for use in planetary mission with respect to radiation tolerance and their propensity for activation. We also contrast their performance with a Ge detector representative of that flown on MESSENGER and show that: (a) both LaBr{sub 3}(Ce{sup 3+}) and CeBr{sub 3} provide superior detection systems over HPGe in the context of minimally resourced spacecraft and (b) CeBr{sub 3} is a more attractive system than LaBr{sub 3}(Ce{sup 3+}) in terms of sensitivities at lower gamma fluxes. Based on the tests, the FM has now been replaced by the FSM on the BepiColombo spacecraft. Thus, CeBr{sub 3} now forms

Radiation streaming with SAM-CE

International Nuclear Information System (INIS)

De Gangi, N.; Cohen, M.O.; Waluschka, E.; Steinberg, H.A.

1980-01-01

The SAM-CE Monte Carlo code has been employed to calculate doses, due to neutron streaming, on the operating floor and other locations of the Millstone Unit II Nuclear Power Facility. Calculated results were compared against measured doses

Toxicity of 144Ce inhaled in a relatively insoluble form by beagle dogs

International Nuclear Information System (INIS)

Boecker, B.B.; Hahn, F.F.; Muggenburg, B.A.; Mauderly, J.L.; McClellan, R.O.; Pickrell, J.A.

1980-01-01

The metabolism, dosimetry and effects of 144 Ce inhaled in fused aluminosilicate particles are being investigated in the beagle dog to assess the long-term biological consequences of release of relatively insoluble aerosol forms of 144 Ce that could occur in nuclear accidents. The effects resulting from the relatively protracted radiation dose patterns to the lung from this form of 144 Ce are being compared with effects of other radiation dose patterns to the lung. One hundred eleven dogs were exposed to aerosols of 144 Ce in fused aluminosilicate particles to yield initial lung burdens of 0.0024 to 210 μCi/kg body weight and 15 control dogs were exposed to nonradioactive fused aluminosilicate particles. To date, 65 144 Ce-exposed and 2 control dogs have died or were euthanized at 143 to 4578 days after inhalation of 144 Ce. Prominent findings in the 144 Ce-exposed dogs were radiation pneumonitis in 17 dogs that died at early times and neoplastic disease in 39 of the 48 dogs that died 750 days or later. Observations are continuing on the 46 144 Ce-exposed and 13 control dogs remaining alive at this time, at least 3337 days after exposure

Stabilization of temperature during magnetic hyperthermia by Ce substituted magnetite nanoparticles

Energy Technology Data Exchange (ETDEWEB)

Shaw, S.K.; Alla, S.K. [Department of Metallurgical Engineering, Indian Institute of Technology (Banaras Hindu University), Varanasi 221005 (India); Meena, S.S. [Solid State Physics Division, Bhabha Atomic Research Centre, Mumbai 400085 (India); Mandal, R.K. [Department of Metallurgical Engineering, Indian Institute of Technology (Banaras Hindu University), Varanasi 221005 (India); Prasad, N.K., E-mail: nandkp.met@iitbhu.ac.in [Department of Metallurgical Engineering, Indian Institute of Technology (Banaras Hindu University), Varanasi 221005 (India)

2017-07-15

Highlights: • Ce{sub x}Fe{sub 3−x}O{sub 4} (0.01 ≤ x ≤ 0.5) nanoparticles below 15 nm were synthesized by microwave refluxing method. • The saturation magnetization decreased with increased Ce concentration. • The sample displayed stabilization of temperature near 42 °C during magnetic hyperthermia. - Abstract: We report here magnetic hyperthermia using nanoparticles of Ce{sub x}Fe{sub 3−x}O{sub 4} (x = 0.01, 0.05, 0.1, 0.3 and 0.5) during which temperature was found to be stabilizing near 42 °C. This happens despite of their high saturation magnetization (M{sub S}) and Curie temperature (T{sub C}) values. It was observed that by selecting an appropriate magnetic field the temperature can be rose exactly near the therapeutic temperature and thus it will help to selectively kill the cancerous cells leaving normal cells unaffected. These nanoparticles (size around 8–15 nm) were produced by single step microwave refluxing technique. X-ray diffraction (XRD) analysis demonstrates that samples were essentially single phase except for x = 0.5 sample. The X-ray photoelectron spectroscopy (XPS) study for the samples demonstrated that Ce was present in both Ce{sup 3+} and Ce{sup 4+} states. The saturation magnetization value of the samples decreased sharply from 62 Am{sup 2}/kg for x = 0.01 to 19 Am{sup 2}/kg for x = 0.1. This value further decreased with increased Ce doping.

Incommensurate and commensurate magnetic structures of the ternary germanide CeNiGe3

International Nuclear Information System (INIS)

Durivault, L; Bouree, F; Chevalier, B; Andre, G; Weill, F; Etourneau, J; Martinez-Samper, P; Rodrigo, J G; Suderow, H; Vieira, S

2003-01-01

The structural properties of CeNiGe 3 have been investigated via electron diffraction and neutron powder diffraction (NPD). This ternary germanide crystallizes in the orthorhombic SmNiGe 3 -type structure (Cmmm space group). Electrical resistivity, ac- and dc-magnetization measurements show that CeNiGe 3 orders antiferromagnetically below T N = 5.5(2) K and exclude the occurrence at low temperatures of a spin-glass state for CeNiGe 3 as previously reported. Specific heat measurements and NPD both reveal two magnetic transitions, observed at T N1 = 5.9(2) K and T N2 = 5.0(2) K. Between T N1 and T N2 , the Ce magnetic moments in CeNiGe 3 are ordered in a collinear antiferromagnetic structure associated with the k 1 = (100) wavevector and showing a relationship with the magnetic structure of the Ce 3 Ni 2 Ge 7 ternary germanide. Below T N2 , this k 1 = (100) commensurate magnetic structure coexists with an incommensurate helicoidal magnetic structure associated with k 2 = (00.409(1)1/2). This last magnetic structure is highly preponderant below T N2 (93(5)% in volume). At 1.5 K, the Ce atoms in CeNiGe 3 carry a reduced ordered magnetic moment (0.8(2) μ B ). This value, smaller than that obtained in Ce 3 Ni 2 Ge 7 , results from an important hybridization of the 4f(Ce) orbitals with those of the Ni and Ge ligands

Decays of 143La and 145Ce using KUR-ISOL

International Nuclear Information System (INIS)

Ukon, Hiroe; Shibata, Michihiro; Kawade, Kiyoshi; Yamamoto, Hiroshi; Katoh, Toshiro; Kawase, Yoichi; Okano, Kotoyuki; Ruan, J.Z.

1987-01-01

Accurate measurements of beta- and gamma-rays resulting from the decay of 143 La and 145 Ce are made with KUR-ISOL to develop their decay diagram. First, gamma-singles spectrometry is performed to determine the energy and intensity of gamma-rays resulting from the decay of 143 La and 145 Ce. About 30 and 7 peaks are newly identified for 143 La and 145 Ce, respectively, in their gamma-ray spectra. Another gamma-singles spectrometry is carried out using 60 cm 3 Ge(Li) and LEPS detectors to determine 620 keV gamma-ray emission rate in the decay of 143 La. The emission rate is calculated at 4.23 and 4.62 percent from measurements made with Ge(Li) and LEPS, respectively. Gamma-gamma coincidence spectrometry is performed using a 60 cm 3 Ge(Li)-142 cm 3 Ge(Li) or a 60 cm 3 Ge(Li)-LEPS detector. LEPS is then applied to beta-singles spectrometry to determine the maximum energy of the gamma-rays from 143 La and 145 Ce within an error of about 20 keV. The beta-ray end point is determined from the measurements. Decay diagrams of 143 La and 145 Ce are constructed based on these results. The intensity and multipolarity of 18.9, 23.4 and 42.3 keV gamma-rays in the decay of 143 La are determined. Energy and intensity of gamma-rays of 2.8 MeV or above are also determined for 143 La. Three low energy levels of 145 Ce is examined in comparison to the decay diagram of 143 La. 143 Ce is found to have an energy level structure similar to that of other nuclides of N = 85. (Nogami, K.)

Mesoporous CeTiSiMCM-48 as novel photocatalyst for degradation of organic compounds

International Nuclear Information System (INIS)

Mureseanu, Mihaela; Parvulescu, Viorica; Radu, Teodora; Filip, Mihaela; Carja, Gabriela

2015-01-01

This work presents novel photocatalysts containing Ti and/or Ce embedded in the mesoporous silica framework (TiSiMCM-48, CeSiMCM-48 and CeTiSiMCM-48) that were prepared via a facile sol–gel process in the presence of ionic structure directing agents. The structural properties of the obtained materials were analyzed by X-ray diffraction (XRD), nitrogen adsorption-desorption, scanning and transmission electron microscopy (SEM, TEM), EDAX analysis, X-ray photoelectron microscopy (XPS), ultraviolet–visible diffuse reflectance spectroscopy (UV–vis DRS) and Fourier transformation infrared spectroscopy (FT-IR). The results indicated that Ce and Ti were highly dispersed or incorporated into the framework of the cubic SiMCM-48, with an enhanced light-trapping effect both in the UV and Vis regions. When applied to the photocatalytic degradation of phenol, the best results were obtained for the bimetallic hybrid. The best activity of CeTiSiMCM-48 photocatalyst was ascribed to improved electron–hole pair separation efficiency and formation of more reactive oxygen species due to the presence of Ce 4+ /Ce 3+ . The mesoporous support increases the dispersability of the photoactive Ti 4+ or Ce 4+ /Ce 3+ species on the catalyst surface and the accessibility of the substrate to the active sites. Furthermore, the catalysts can be easily recovered and reused for four cycles without significant loss of activity. - Highlights: • Novel photocatalysts containing Ti and/or Ce embedded in the mesoporous MCM-48 silica. • Ce 4+ /Ce 3+ improved electron–hole pair separation and reactivity of oxygen species. • The mesoporous support increases the dispersability of the photoactive species. • The photocatalyst was highly active and stable for phenol degradation under UV irradiation. • TiCeSiMCM-48 can be recycled up to four cycles without significant loss of activity

Exposure of agricultural crops to nanoparticle CeO2 in biochar-amended soil.

Science.gov (United States)

Servin, Alia D; De la Torre-Roche, Roberto; Castillo-Michel, Hiram; Pagano, Luca; Hawthorne, Joseph; Musante, Craig; Pignatello, Joseph; Uchimiya, Minori; White, Jason C

2017-01-01

Biochar is seeing increased usage as an amendment in agricultural soils but the significance of nanoscale interactions between this additive and engineered nanoparticles (ENP) remains unknown. Corn, lettuce, soybean and zucchini were grown for 28 d in two different soils (agricultural, residential) amended with 0-2000 mg engineered nanoparticle (ENP) CeO 2  kg -1 and biochar (350 °C or 600 °C) at application rates of 0-5% (w/w). At harvest, plants were analyzed for biomass, Ce content, chlorophyll and lipid peroxidation. Biomass from the four species grown in residential soil varied with species and biochar type. However, biomass in the agricultural soil amended with biochar 600 °C was largely unaffected. Biochar co-exposure had minimal impact on Ce accumulation, with reduced or increased Ce content occurring at the highest (5%) biochar level. Soil-specific and biochar-specific effects on Ce accumulation were observed in the four species. For example, zucchini grown in agricultural soil with 2000 mg CeO 2  kg -1 and 350 °C biochar (0.5-5%) accumulated greater Ce than the control. However, for the 600 °C biochar, the opposite effect was evident, with decreased Ce content as biochar increased. A principal component analysis showed that biochar type accounted for 56-99% of the variance in chlorophyll and lipid peroxidation across the plants. SEM and μ-XRF showed Ce association with specific biochar and soil components, while μ-XANES analysis confirmed that after 28 d in soil, the Ce remained largely as CeO 2 . The current study demonstrates that biochar synthesis conditions significantly impact interactions with ENP, with subsequent effects on particle fate and effects. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

Inovação educacional em pequeno município: o caso Fundação Casa Grande (Nova Olinda, CE, Brasil Educational innovation in small towns: the case of 'Fundação Casa Grande' (Nova Olinda, CE, Brazil

Directory of Open Access Journals (Sweden)

Elie Ghanem

2012-09-01

Full Text Available Este artigo apresenta os resultados de um estudo de caso de inovação educacional na atuação da Organização Não Governamental Fundação Casa Grande - Memorial do Homem Kariri junto a crianças e jovens do município de Nova Olinda, CE, Brasil. O principal problema da pesquisa que este artigo visa apresentar é: que fatores se conjugam na geração de ações de inovação educacional? A hipótese examinada pela pesquisa foi a de que fatores salientes que se conjugam na geração de ações de inovação são o tempo de experiência profissional de educadores(as, a estabilidade de sua equipe, o nível de qualificação e a atuação mobilizadora de líderes da Organização. São descritos os objetivos e características da atuação da Organização e são apontadas as características de líderes, agentes e equipes. Conclui que a hipótese levantada foi confirmada.This article presents the results of an educational innovation case study on the 'Fundação Casa Grande - Memorial do Homem Kariri' Non-governmental Organization's operation with children and youngsters in Nova Olinda, State of Ceara, Brazil. The main matter of this research is: What factors are conjugated at the genesis of educacional innovation actions? The study examines the hypothesis that the proeminent factors conjugated in educational innovation generation are: length of educator's professional experience, team's stability, NGO leaders' qualification level, and mobilizing action. The NGO's objectives and operation characteristics are described. Characteristics of leaders, education agents and teams are presented. It was possible to conclude that the proposed hypothesis was confirmed.

Dosimeter properties of Ce and Eu doped LiCaAlF6

International Nuclear Information System (INIS)

Yanagida, Takayuki; Fujimoto, Yutaka; Watanabe, Kenichi; Fukuda, Kentaro

2014-01-01

Optical, scintillation properties, optical stimulated luminescence, and thermally stimulated luminescence of Ce 1, 3, and 5% doped and Eu 1, 1.5, and 2% doped LiCaAlF 6 crystals fabricated by Tokuyama Corp. were investigated. In transmittance, absorption was proportional to dopant concentrations and typical optical quantum yield of Ce and Eu-doped LiCaAlF 6 were 40 and 100%, respectively. Scintillation wavelength and decay time profiles were investigated under X-ray irradiation. Ce 3+ and Eu 2+ 5d-4f luminescence appeared around 300 nm and 370 nm with typical decay time of 40 ns and 1.5 μs, respectively. Optically stimulated luminescence of Ce-doped ones appeared under 405 nm stimulation with detectable intensity while those of Eu doped ones were quite weak. Thermally stimulated luminescence of Ce- and Eu-doped LiCaAlF 6 were enough strong and they exhibited good response function from 1 to 1000 mGy exposure. - Highlights: • Optical, scintillation, OSL, and TSL properties of Ce or Eu differently doped LiCaAlF6 were studied. • PL quantum yield of Ce and Eu doped LiCaAlF6 showed 40% and 100%, respectively. • OSL was observed in Ce-doped LiCaAlF6. • TSL was observed in both material systems and exhibited a good dose response from 1 to 1000 mGy

Morbidade referida e seus condicionantes em crianças de 5 a 9 anos em Sobral, CE, Brasil Reported morbidity and its conditionings in children 5 to 9 years old in Sobral, CE, Brazil

Directory of Open Access Journals (Sweden)

Ivana Cristina de Holanda Cunha Barreto

2010-03-01

Full Text Available OBJETIVO: Descrever a morbidade referida em crianças de 5 a 9 anos e analisar seus possíveis condicionantes. METODOLOGIA: Corte de base populacional com amostra aleatória e representativa em crianças de 5 a 9 anos da zona urbana de Sobral - CE, Brasil. Entrevistas domiciliares com 3.276 crianças e exame clínico em 2.594. A morbidade referida foi classificada segundo a CID-10. O desfecho analisado foi morbidade referida nos últimos 15 dias, utilizando Stata 7.0. RESULTADOS: 43,9% das crianças apresentaram morbidade referida: Doenças do Aparelho Respiratório (DAR, 28,7%; doenças da pele, 3,4%; doenças infecciosas, 2,2%. Daquelas que adoeceram, 41,5% procuraram atendimento. Dessas, 77,4% em Unidades de Saúde Familiar. Apresentaram maiores chances de DAR as crianças com as seguintes características: residir no núcleo urbano principal do município, ter antecedente de desnutrição e frequentar escola, com um valor de ODDS Ratio, respectivamente de 1,48 (IC95%1,10-1,99, 1,30 (IC95%1,05-1,60 e 1,54 (IC95%1,02-2,32. DISCUSSÃO: Chamou a atenção a elevada prevalência de DAR em crianças do núcleo urbano principal, cerca de duas vezes maior que a observada em outros estudos de metodologia similar, levantando hipóteses de sobrerelato ou poluição ambiental. A maioria das crianças apresentou problemas de saúde de menor gravidade e teve acesso facilitado aos serviços de saúde, principalmente ao PSF. CONCLUSÕES: Serão necessários novos estudos para identificar possíveis causas da elevada prevalência de DAR em crianças do núcleo urbano principal do município. As ocasiões em que as crianças demandam os serviços de saúde da família por doenças de baixa gravidade podem ser aproveitadas para medidas de prevenção e promoção da saúde.INTRODUCTION: This study was based on a random sample of 3,276 children aged between 5 and 9 years from the urban region of Sobral - CE, Brazil. OBJECTIVE: The main goal was to describe

Estimation of human gonadal Pu and Ce concentrations from animal data

International Nuclear Information System (INIS)

Thomas, R.G.; Durbin, P.W.; McInroy, J.F.; Healy, J.W.

1989-01-01

Data were obtained from the literature for gonad and body weights and for the Pu or Ce content of the gonads and body at death for several laboratory animal species, five human Pu injection cases, and 731 human adults exposed environmentally to Pu in fallout. Data for Pu concentration in gonads, liver, and bone samples of 59 male and five female occupational Pu cases (including four completely analyzed whole bodies) were obtained from the U.S. Transuranium Registry. A logarithmic function was used to relate fractional Pu or Ce concentration in testes and ovaries to body weight of the animals and to predict fractional Pu or Ce concentrations in human gonads, [Pu]G . PuB-1 = aBWb, where [Pu]G or [Ce]G is the nuclide concentration in gonads (Bq g-1 of wet weight), PuB or CeB is the nuclide content of the body at death, and BW is body weight (kg). The fractional Pu and Ce concentrations in both the testes and ovaries are inverse and nearly linear functions of body weight. The regression lines of fractional Pu or Ce concentration in testes and ovaries have similar slopes (b = -1.07 +/- 0.14); however, the nuclide concentrations (coefficient a) in ovaries are six times greater than in testes. Extrapolation of the animal data yielded fractional Pu concentrations in human testes and ovaries that agree with those calculated for the occupational cases and those recommended by the International Commission on Radiological Protection. The good agreement between the fractional concentrations of Pu and Ce in the testes and in the ovaries suggests that these data can be substituted in metabolic models of chemically similar elements for which gonadal data are scarce

New limits on 2ε, εβ{sup +} and 2β{sup +} decay of {sup 136}Ce and {sup 138}Ce with deeply purified cerium sample

Energy Technology Data Exchange (ETDEWEB)

Belli, P.; Bernabei, R. [INFN Sezione Roma ' ' Tor Vergata' ' , Rome (Italy); Universita di Roma ' ' Tor Vergata' ' , Dipartimento di Fisica, Rome (Italy); Boiko, R.S. [Institute for Nuclear Research, Kyiv (Ukraine); National University of Life and Environmental Sciences of Ukraine, Kyiv (Ukraine); Cappella, F. [INFN Sezione Roma, Rome (Italy); Cerulli, R.; Laubenstein, M. [INFN, Laboratori Nazionali del Gran Sasso, Assergi (Italy); Danevich, F.A.; Kropivyansky, B.N.; Polischuk, O.G.; Tretyak, V.I. [Institute for Nuclear Research, Kyiv (Ukraine); Incicchitti, A. [INFN Sezione Roma, Rome (Italy); Universita di Roma ' ' La Sapienza' ' , Dipartimento di Fisica, Rome (Italy); Mokina, V.M. [Institute for Nuclear Research, Kyiv (Ukraine); INFN Sezione Roma, Rome (Italy)

2017-08-15

A search for double electron capture (2ε), electron capture with positron emission (εβ{sup +}), and double positron emission (2β{sup +}) in {sup 136}Ce and {sup 138}Ce was realized with a 465 cm{sup 3} ultra-low background HP Ge γ spectrometer over 2299 h at the Gran Sasso underground laboratory. A 627 g sample of cerium oxide deeply purified by liquid-liquid extraction method was used as a source of γ quanta expected in double β decay of the cerium isotopes. New improved half-life limits were set on different modes and channels of double β decay of {sup 136}Ce and {sup 138}Ce at the level of T{sub 1/2} > 10{sup 17}-10{sup 18} yr. (orig.)

Specific heat measurements of CePt{sub 3}Si and Ce{sub 1+x}Pt{sub 3+y}Si{sub 1+z}

Energy Technology Data Exchange (ETDEWEB)

Motoyama, G. [Graduate School of Material Science, University of Hyogo, Kamigori-cho, Ako-gun, Hyogo 678-1297 (Japan)]. E-mail: motoyama@sci.u-hyogo.ac.jp; Watanabe, M. [Graduate School of Material Science, University of Hyogo, Kamigori-cho, Ako-gun, Hyogo 678-1297 (Japan); Maeda, K. [Graduate School of Material Science, University of Hyogo, Kamigori-cho, Ako-gun, Hyogo 678-1297 (Japan); Oda, Y. [Graduate School of Material Science, University of Hyogo, Kamigori-cho, Ako-gun, Hyogo 678-1297 (Japan); Ueda, K. [Graduate School of Material Science, University of Hyogo, Kamigori-cho, Ako-gun, Hyogo 678-1297 (Japan); Kohara, T. [Graduate School of Material Science, University of Hyogo, Kamigori-cho, Ako-gun, Hyogo 678-1297 (Japan)

2007-03-15

We have measured the specific heat of a series of polycrystalline CePt{sub 3}Si and Ce{sub 1+x}Pt{sub 3+y}Si{sub 1+z} samples whose compositions vary slightly from the stoichiometric composition. We observed two peaks derived from magnetic anomalies on the specific heat measurements of the Ce{sub 1+x}Pt{sub 3+y}Si{sub 1+z} samples. One of the peaks relates to the antiferromagnetic phase transition at T{sub N}=2.2K. The other is a large peak at 2.7K observed for the sample that showed a ferromagnetic anomaly at 3.0K on the temperature dependence of the magnetization. Heat treatment had different effects between these anomalies.

Database Description - tRNADB-CE | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available switchLanguage; BLAST Search Image Search Home About Archive Update History Data List Contact us tRNAD...B-CE Database Description General information of database Database name tRNADB-CE Alter...CC BY-SA Detail Background and funding Name: MEXT Integrated Database Project Reference(s) Article title: tRNAD... 2009 Jan;37(Database issue):D163-8. External Links: Article title: tRNADB-CE 2011: tRNA gene database curat...n Download License Update History of This Database Site Policy | Contact Us Database Description - tRNADB-CE | LSDB Archive ...

Scintillation properties of Ce-doped LuLiF{sub 4} and LuScBO{sub 3}

Energy Technology Data Exchange (ETDEWEB)

Yanagida, Takayuki, E-mail: t_yanagi@tagen.tohoku.ac.jp [IMRAM, Tohoku University, 2-1-1 Katahira, Aoba-ku, Sendai, Miyagi 980-8577 (Japan); Fujimoto, Yutaka [IMRAM, Tohoku University, 2-1-1 Katahira, Aoba-ku, Sendai, Miyagi 980-8577 (Japan); Kawaguchi, Noriaki [IMRAM, Tohoku University, 2-1-1 Katahira, Aoba-ku, Sendai, Miyagi 980-8577 (Japan); Tokuyama Corporation, Shibuya 3-chome, Shibuya-ku, Tokyo 150-8383 (Japan); Yokota, Yuui [IMRAM, Tohoku University, 2-1-1 Katahira, Aoba-ku, Sendai, Miyagi 980-8577 (Japan); Kamada, Kei [Materials Research Laboratory, Furukawa, Co. Ltd., 1-25-13 Kannondai, Tsukuba, Ibaragi 305-0856 (Japan); Totsuka, Daisuke [Nihon Kessho Kogaku Co., Ltd., 810-5 Nobe-cho, Tatebayashi, Gunma 374-0047 (Japan); Hatamoto, Shun-Ichi [Corporate Research and Development Center, Mitsui Mining and Smelting Co., Ltd., 1333-2 Haraichi, Ageo Saitama 362-0023 (Japan); Yoshikawa, Akira; Chani, Valery [IMRAM, Tohoku University, 2-1-1 Katahira, Aoba-ku, Sendai, Miyagi 980-8577 (Japan)

2011-10-01

The crystals of 1 mol% Ce-doped LuLiF{sub 4} (Ce:LLF) grown by the micro-pulling down ({mu}-PD) method and 1 mol% Ce-doped LuScBO{sub 3} (Ce:LSBO) grown by the conventional Czochralski (Cz) method were examined for their scintillation properties. Ce:LLF and Ce:LSBO demonstrated {approx}80% transparency at wavelengths longer than 300 and 400 nm, respectively. When excited by {sup 241}Am {alpha}-ray to obtain radioactive luminescence spectra, Ce{sup 3+} 5d-4f emission peaks were detected at around 320 nm for Ce:LLF and at around 380 nm for Ce:LSBO. In Ce:LSBO, the host luminescence was also observed at 260 nm. By recording pulse height spectra under {gamma}-ray irradiation, the absolute light yield of Ce:LLF and Ce:LSBO was measured to be 3600{+-}400 and 4200{+-}400 ph/MeV, respectively. Decay time kinetics was also investigated using a pulse X-ray equipped streak camera system. The main component of Ce:LLF was {approx}320 ns and that of Ce:LSBO was {approx}31 ns. In addition, the light yield non-proportionality and energy resolution against the {gamma}-ray energy were evaluated.

Heat capacity measurement of CeNbO4(s)

International Nuclear Information System (INIS)

Bhojane, S.M.; Kulkarni, Jayanthi; Kulkarni, S.G.

2012-01-01

Molar heat capacity of CeNbO 4 (s) was determined using differential scanning calorimeter in the temperature range of 550 to 900 K. The molar heat capacity values were least squares analysed and the dependence of molar heat capacity with temperature for CeNbO 4 (s) can be given as, J K -1 mol -1 = 94.7320 + 0.0852T-1.6073 x 10 6 T -2 (550≤T(K)≤900) Cerium is commonly used as an inactive analogue to plutonium; also it is an important fission product with moderate yield. Various Nb alloys are used as cladding material in nuclear industry. Hosts of thermodynamic data are needed to understand the various phenomena that occur in a nuclear reactor. In the present study, the molar heat capacity of CeNbO 4 (s) has been determined using high temperature differential scanning calorimeter in temperature range 550 to 900 K. This is one of the important compounds in the ternary system of Ce-Nb-O

Speciation of the oxidation states of plutonium in aqueous solutions by UV/Vis spectroscopy, CE-ICP-MS and CE-RIMS

International Nuclear Information System (INIS)

Buerger, S.; Banik, N.L.; Buda, R.A.; Kratz, J.V.; Kuczewski, B.; Trautmann, N.

2007-01-01

For the speciation of the plutonium oxidation states in aqueous solutions, the online coupling of capillary electrophoresis (CE) with inductively coupled plasma mass spectrometry (ICP-MS) has been developed. Depending on the radius/electrical charge ratio, the oxidation states III, IV, V, and VI of plutonium are separated by CE, based on the different migration times through the capillary and are detected by ICP-MS. The detection limit is 20 ppb, i.e. 10 9 -10 10 atoms (10 -12 -10 -13 g) for one oxidation state with an uncertainty of the reproducibility of the migration times of ≤ 1% and ≤ 5% for the peak area. The redox kinetics of the different plutonium oxidation states in the presence of humic substances (humic and fulvic acid) have been studied. A relatively rapid reduction of Pu(VI) (10 to 1000 h) in contact with Gorleben fulvic or Aldrich humic acid could be observed, depending on the pH of the solution. Furthermore, at pH=1, a reduction to Pu(III) and Pu(IV) in a mixture of all four oxidation states in contact with Gorleben fulvic acid after one month has been observed. In order to improve the sensitivity of the CE method, the offline coupling of CE to resonance ionization mass spectrometry (RIMS) has been explored. First applications of this new speciation method are presented. (orig.)

Magnetic susceptibility of LaxCe1-xF3 single crystals

International Nuclear Information System (INIS)

Paradowski, M.L.; Pacyna, A.W.; Bombik, A.; Korczak, W.; Korczak, S.Z.

2000-01-01

The magnetic susceptibility of La x Ce 1-x F 3 single crystals, for 0 eff and paramagnetic Curie temperature θ p have been obtained, using the Curie-Weiss law in the temperature range 100-300 K. The interconfiguration excited energy E ex , the spin-fluctuation temperature T sf , and the g-values, corresponding to three Kramers doublets in the 2 F 5/2 ground multiplet of Ce 3+ ion in La x Ce 1-x F 3 have been determined, using quantum theory of paramagnetic susceptibility. The mixed-valent and crystal field effects influence significantly the g-values. The effect of the dilution of the paramagnetic Ce 3+ ions with diamagnetic La 3+ ions is also discussed

Preparation of Mn doped CeO_2 nanoparticles with enhanced ferromagnetism

International Nuclear Information System (INIS)

Ravi, S.; Winfred Shashikanth, F.

2017-01-01

Spherical-like CeO_2 and Mn-doped CeO_2 using 6-aminohexanoic acid as surfactant exhibit enhanced ferromagnetism. The optical absorption spectra reveal a red shift with a band gap of 2.51 eV. The mechanics of ferromagnetism and the red shift were analyzed. These results provide a promising platform for developing a dilute magnetic semiconductor in spintronics. - Highlights: • Pure and Mn-doped CeO_2 is prepared with aminohexanoic acid as capping. • They exhibit wide optical absorption with red-shift in their band gap. • Mn-doped CeO_2 nanoparticle exhibit hysteresis at room temperature. • Results were promising to use in spintronics and opto-electronics field.

Investigation of the 600 C isothermal section of the Fe-Al-Ce ternary system

Energy Technology Data Exchange (ETDEWEB)

Zheng, Huiyun; Yin, Fucheng [Xiangtan Univ., Hunan (China). School of Materials Science and Engineering; Xiangtan Univ., Hunan (China). Key Laboratory of Materials Design and Preparation Technology of Hunan Province; Li, Zhi [Xiangtan Univ., Hunan (China). School of Materials Science and Engineering; Xiangtan Univ., Hunan (China). Key Laboratory of Materials Design and Preparation Technology of Hunan Province; Xiangtan Univ., Hunan (China). Key Laboratory of Key Film Materials and Application for Equipment (Hunan province); Ji, Li [South China University of Technology, Guangdong (China). School of Materials Science and Engineering

2017-01-15

The isothermal section of the Fe-Al-Ce system at 600 C was determined by means of scanning electron microscopy coupled with energy dispersive spectroscopy and X-ray powder diffraction. Twenty three-phase regions were confirmed experimentally, and two three-phase regions could be deduced in this section. Five ternary compounds, i. e., τ{sub 1}, τ{sub 2}, τ{sub 3}, τ{sub 5}, and τ{sub 6}, exist at 600 C. The Fe{sub 2}Ce phase contains 6.6 at.% Al in the Fe-Al-Ce system. The Fe solubility in α-Al, αAl{sub 11}Ce{sub 3}, αAl{sub 3}Ce, Al{sub 2}Ce, AlCe, and AlCe{sub 3} is approximately 1.7 at.%, 1.1 at.%, 1.2 at.%, 1.3 at.%, 5.8 at.%, and 0.1 at.%, respectively, and the solubility of Ce in α-Al, FeAl{sub 3}, Fe{sub 2}Al{sub 5}, FeAl{sub 2}, and FeAl is approximately 0.1 at.%, 1.2 at.%, 1.9 at.%, 0.9 at.%, and 3.7 at.%, respectively.

Evidence of complex magnetism in CePt3C

International Nuclear Information System (INIS)

Vejpravova, J.; Prokleska, J.; Danis, S.; Uhlirova, K.; Sechovsky, V.

2006-01-01

CePt 3 C has been synthesized and studied by powder X-ray diffraction (at RT), specific heat, resistivity and magnetization measurements at temperatures from RT down to 0.4K and in magnetic fields up to 10T. A possible scenario for the ground state of CePt 3 C based on the observed phenomena is proposed

Effects of Ce3+ concentration, beam voltage and current on the cathodoluminescence intensity of SiO2: Pr3+–Ce3+ nanophosphor

CSIR Research Space (South Africa)

Mhlongo, GH

2011-02-01

Full Text Available SiO2:Pr3+–Ce3+ phosphor powders were successfully prepared using a sol–gel process. The concentration of Pr3+ was fixed at 0.2 mol% while that of Ce3+ was varied in the range of 0.2–2 mol%. High resolution transmission electron microscopy (HRTEM...

Structure and photocatalytic activity studies of TiO2-supported over Ce-modified Al-MCM-41

International Nuclear Information System (INIS)

Krishna Reddy, Jakkidi; Durgakumari, Valluri; Subrahmanyam, Machiraju; Sreedhar, Bojja

2009-01-01

Ce-Al-MCM-41, TiO 2 /Al-MCM-41 and TiO 2 /Ce-Al-MCM-41 materials with varying contents of Ce (by impregnation) and TiO 2 loaded (by solid-state dispersion) on Al-MCM-41 support are prepared. The Ce modified and TiO 2 loaded composite systems are characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), UV-vis diffuse reflectance spectra (DRS) and X-ray photoelectron spectroscopy (XPS) techniques. The DRS and XPS of low Ce content (0.2-0.5 wt.%) modified Al-MCM-41 samples are showing more characteristic of Ce 3+ species wherein cerium in interaction with Al-MCM-41 and that of high Ce (0.8, 3.0 wt.%) content modified samples are showing the characteristic of both Ce 4+ and Ce 3+ species. A series of Ce-modified Al-MCM-41 and TiO 2 loaded composite catalysts are evaluated for photocatalytic degradation of phenol under UV irradiation. Low Ce content in Ce 3+ state on Al-MCM-41 is showing good photoactivity in comparison with high Ce content samples and pure ceria. The composite TiO 2 /Ce-Al-MCM-41 is showing enhanced degradation activity due decreased rate of electron-hole recombination on TiO 2 surface by the redox properties of cerium. The photocatalyst TiO 2 /Ce-Al-MCM-41 with an optimum of 10 wt.% TiO 2 and 0.3 wt.% Ce is showing maximum phenol degradation activity. The possible mechanism of phenol degradation on the composite photocatalyst is proposed.

Phase Composition and Long-Term Conductivity of Acceptor Doped Ce(PO₃)₄ and CeP₂O₇ with Variable P/Metal Ratio and of CeP₂O₇-KH₂PO₄ Composite

DEFF Research Database (Denmark)

Chatzichristodoulou, Christodoulos; Hallinder, Jonathan; Lapina, Alberto

2013-01-01

The thermal evolution of the phase composition of CeP2O7 and Ce(PO3)4 with 10 mol% Y and Gd doping, respectively, was examined by in-situ powder X-ray diffraction and thermogravimetry with in-line mass spectroscopy. The phase composition depends critically on the P to metal ratio, the annealing...... temperature, humidity and time. CeP2O7 and Ce(PO3)4 were completely decomposed to CePO4 following a 1100 h long conductivity test at 155°C. The conductivity of 10 mol% Gd doped Ce(PO3)4 (synthesized with P:(Ce + Gd) = 5.0) reaches a value of 6.4·10−2 S·cm−1 at 150°C under wet conditions (pH2O = 0.2 atm...

Solid-state reaction synthesis and aqueous durability of Ce-doped zirconolite-rich ceramics

Energy Technology Data Exchange (ETDEWEB)

Wen, Guanjun [State Key Laboratory Cultivation Base for Nonmetal Composite and Functional Materials, Southwest University of Science and Technology, Mianyang, Sichuan 621010 (China); Zhang, Kuibao, E-mail: xiaobao320@163.com [State Key Laboratory Cultivation Base for Nonmetal Composite and Functional Materials, Southwest University of Science and Technology, Mianyang, Sichuan 621010 (China); Yin, Dan [State Key Laboratory Cultivation Base for Nonmetal Composite and Functional Materials, Southwest University of Science and Technology, Mianyang, Sichuan 621010 (China); Zhang, Haibin, E-mail: hbzhang@imr.ac.cn [Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics, Mianyang 621900 (China)

2015-11-15

In this study, Ce-doped zirconolite-rich ceramics were prepared by solid-state reaction process using cerium as the surrogate of tetravalence actinide nuclide. The occupancy of Ce in the waste forms was investigated. The aqueous durability of Ce-doped zirconolite-rich ceramic was examined as well. The results show that zirconolite and pseudobrookite coexisted after being sintered at 1200 °C for 6 h. Meanwhile, perovskite is inevitable generated during the process. CeO{sub 2} can be successfully incorporated into the lattice structure of the zirconolite-rich ceramics. The maximum containing capacity of CeO{sub 2} is up to 14.95 wt% or y = 0.4. The normalized elemental leaching rates of Ce and Ca are fairly constant in low values of 1.2 × 10{sup −6} and 2.3 × 10{sup −2} g m{sup −2} d{sup −1} after 28 days. The normalized leaching rate of Fe is also in a low value of 2.9 × 10{sup −4} g m{sup −2} d{sup −1} after 7 days. - Highlights: • Ce-doped zirconolite-rich ceramic was produced at 1200 °C. • Pseudobrookite-type Fe{sub 2}TiO{sub 5} was employed to incorporate Fe element. • Ce{sup 3+} and Ce{sup 4+} coexisted in the Ce-doped zirconolite-rich waste form after being sintered at 1200 °C for 6 h. • The leaching rate of Ca was relatively higher than that of borosilicate glasses.

Structure and scintillation yield of Ce-doped Al–Ga substituted yttrium garnet

International Nuclear Information System (INIS)

Sidletskiy, Oleg; Kononets, Valerii; Lebbou, Kheirreddine; Neicheva, Svetlana; Voloshina, Olesya; Bondar, Valerii; Baumer, Vyacheslav; Belikov, Konstantin; Gektin, Alexander; Grinyov, Boris; Joubert, Marie-France

2012-01-01

Highlights: ► Range of Y 3 (Al 1−x Ga x ) 5 O 12 :Ce solid solution crystals are grown from melt by the Czochralski method. ► Light yield of mixed crystals reaches 130% of the YAG:Ce value at x ∼ 0.4. ► ∼1% of antisite defects is formed in YGG:Ce, but no evidence of this is obtained for the rest of crystals. -- Abstract: Structure and scintillation yield of Y 3 (Al 1−x Ga x ) 5 O 12 :Ce solid solution crystals are studied. Crystals are grown from melt by the Czochralski method. Distribution of host cations in crystal lattice is determined. Quantity of antisite defects in crystals is evaluated using XRD and atomic emission spectroscopy data. Trend of light output at Al/Ga substitution in Y 3 (Al 1−x Ga x ) 5 O 12 :Ce is determined for the first time. Light output in mixed crystals reaches 130% comparative to Ce-doped yttrium–aluminum garnet. Luminescence properties at Al/Ga substitution are evaluated.

Effect of Ce on performance and physicochemical properties of Pt-containing automotive emission control catalysts

International Nuclear Information System (INIS)

Nunan, J.G.; Silver, R.G.; Bradley, S.A.

1992-01-01

Present-day automotive emission control catalysts contain noble metals such as Pt, Pd and Rh all on an alumina support with a variety of promoters. Ce is one of the most important promoters. In this paper, the interaction between Pt and Ce is studied using TPR and STEM on a variety of catalysts. The degree of Pt/Ce interaction is increased by decreasing CeO 2 crystallite size, and to a lesser extent by increasing CeO 2 loading. Direct Pt/Ce interaction leads to a synergistic reduction of both Pt and surface Ce. This reduction qualitatively correlates with catalyst performance after activation in a reducing gas. It is proposed that this synergistic reduction of Pt and Ce is associated with observed improvements in catalyst performance using a non-oscillating exhaust gas

Opening up Brazil's hydrocarbon sector - the Bolivia-Brazil pipeline

International Nuclear Information System (INIS)

Law, P.

2000-01-01

The Bolivia-Brazil natural gas pipeline, which transports natural gas more than 3000 km from Bolivia to Brazil, cost US$2.1 billion to construct. Despite the substantial benefits for both Bolivia and Brazil and the involvement of reputable private partners, the perceived risks and complexities of this large project made financing it major challenge. neither of these countries has had a tradition of independent regulation or economic fuel pricing, and the pipeline was the first major gas infrastructure project involving the private sector in Brazil. The presentation explains the historical features of the project and how the project was used to open up Brazilian oil and gas sector to private investment and competition. (author)

Light emission efficiency and imaging properties of YAP:Ce granular phosphor screens

International Nuclear Information System (INIS)

Kalivas, N.; Valais, I.; Nikolopoulos, D.; Konstantinidis, A.; Cavouras, D.; Kandarakis, I.; Gaitanis, A.; Nomicos, C.D.; Panayiotakis, G.

2007-01-01

Phosphor materials are used in medical imaging combined with radiographic film or other photodetectors. Cerium (Ce 3+ ) -doped scintillators are of particular interest for medical imaging, because of their very fast response. YAP:Ce scintillator-based image detectors have already been evaluated in single-crystal form and under conditions of positron emission tomography and synchrotron or γ-ray irradiation. Furthermore, YAP:Ce phosphor has been evaluated in conjunction with radiographic films. The present work reports experimental and theoretical data concerning the light output absolute luminescence efficiency (AE) of the YAP:Ce screens under irradiation conditions employed in medical X-ray projection imaging (i.e., in diagnostic radiology). projection imaging (i.e., in diagnostic radiology). YAP:Ce phosphor screens with surface densities ranging between 53 and 110 mg/cm 2 were prepared by sedimentation on fused silica substrates in our laboratory. The resulted surface density of the screens was determined by dividing the phosphor mass deposited on the screen surface with the area of the surface. Additionally this work addresses the imaging performance of YAP:Ce by estimation of the detective quantum efficiency (DQE), i.e., the square of the signal to noise ratio transfer. Absolute efficiency was found to decrease with X-ray tube voltage for for YAP:Ce phosphor. The highest experimental efficiency was obtained for the 53.7 mg/cm 2 and 88.0 mg/cm 2 YAP:Ce screens. The highest DQE value was found for the 88.0 mg/cm 2 screen irradiated at 60 kVp. (orig.)

Magnetic properties of nearly stoichiometric CeAuBi2 heavy fermion compound

International Nuclear Information System (INIS)

Adriano, C.; Jesus, C. B. R.; Pagliuso, P. G.; Rosa, P. F. S.; Grant, T.; Fisk, Z.; Garcia, D. J.

2015-01-01

Motivated by the interesting magnetic anisotropy found in the heavy fermion family CeTX 2 (T = transition metal and X = pnictogen), here, we study the novel parent compound CeAu 1−x Bi 2−y by combining magnetization, pressure dependent electrical resistivity, and heat-capacity measurements. The magnetic properties of our nearly stoichiometric single crystal sample of CeAu 1−x Bi 2−y (x = 0.92 and y = 1.6) revealed an antiferromagnetic ordering at T N  = 12 K with an easy axis along the c-direction. The field dependent magnetization data at low temperatures reveal the existence of a spin-flop transition when the field is applied along the c-axis (H c  ∼ 7.5 T and T = 5 K). The heat capacity and pressure dependent resistivity data suggest that CeAu 0.92 Bi 1.6 exhibits a weak heavy fermion behavior with strongly localized Ce 3+ 4f electrons. Furthermore, the systematic analysis using a mean field model including anisotropic nearest-neighbors interactions and the tetragonal crystalline electric field (CEF) Hamiltonian allows us to extract a CEF scheme and two different values for the anisotropic J RKKY exchange parameters between the Ce 3+ ions in this compound. Thus, we discuss a scenario, considering both the anisotropic magnetic interactions and the tetragonal CEF effects, in the CeAu 1−x Bi 2−y compounds, and we compare our results with the isostructural compound CeCuBi 2

Chemiluminescence of the Ce{sup 3+}* ions, and the {sup 1}ГђЕѕ{sub 2} and ({sup 1}ГђЕѕ{sub 2}){sub 2} molecular species of oxygen induced by active surface of the (NH{sub 4}){sub 2}Ce(NO{sub 3}){sub 6} crystals at reduction of Ce{sup 4+} to Ce{sup 3+} by water in heterogeneous system «(NH{sub 4}){sub 2}Ce(NO{sub 3}){sub 6}-C{sub 6}H{sub 6}-H{sub 2}O»

Energy Technology Data Exchange (ETDEWEB)

Bulgakov, Ramil G., E-mail: profbulgakov@yandex.ru [Laboratory of Negative Ions Mass Spectrometry, Institute of Molecule and Crystal Physics, Ufa Research Centre of the Russian Academy of Sciences, 71, Oktyabrya Prosp., 450054 Ufa (Russian Federation); Gazeeva, Dilara R., E-mail: galimovdi@mail.ru [Laboratory of High Energy Chemistry and Catalysis, Institute of Petrochemistry and Catalysis Russian Academy of Sciences, 141 Prosp. Oktyabrya, 450075 Ufa (Russian Federation); Galimov, Dim I. [Laboratory of High Energy Chemistry and Catalysis, Institute of Petrochemistry and Catalysis Russian Academy of Sciences, 141 Prosp. Oktyabrya, 450075 Ufa (Russian Federation)

2017-03-15

We have discovered an unusual new chemiluminescence (CL) in the title system, which is different from other known CL by unusual combination of various in nature emitters, namely, electronically excited state of the Ce{sup 3+}* ion (λ{sub max}=335 nm), singlet oxygen {sup 1}ГђЕѕ{sub 2} (emission near 1270 nm) and its dimer ({sup 1}ГђЕѕ{sub 2}){sub 2} (λ{sub max}=490, 645, 715 nm). The Ce{sup 3+}* ions and oxygen emitters {sup 1}O{sub 2} and ({sup 1}O{sub 2}){sub 2} are generated in the reaction of Ce{sup 4+} with water and hydrogen peroxide, respectively. CL is generated only in a heterogeneous system «(NH{sub 4}){sub 2}Ce(NO{sub 3}){sub 6}-C{sub 6}H{sub 6}-H{sub 2}O» and completely absent in a homogeneous solution (NH{sub 4}){sub 2}Ce(NO{sub 3}){sub 6} in water containing benzene. This is due to the fact that the redox processes and CL in the «(NH{sub 4}){sub 2}Ce(NO{sub 3}){sub 6}-C{sub 6}H{sub 6}-H{sub 2}O» system are induced by active surface of the (NH{sub 4}){sub 2}Ce(NO{sub 3}){sub 6} crystals. It is through the action of the active surface of the (NH{sub 4}){sub 2}Ce(NO{sub 3}){sub 6} crystals is carried out population of such a high energy level of 5d{sup 1} excited state of Ce{sup 3+}* ion (λ{sub max}=353 nm, 3.7 eV). Discovered CL is the first example of an experimental registration of the Ce{sup 3+}* ion emission in a chemical reaction, because formation of Ce{sup 3+}* ion previously assumed to be in a great many works on the study of CL in reactions of Ce{sup 4+} compounds with various reducing agents, including the reaction with water, initiated by light or catalysts. Possible mechanism generation of new CL in the system under study has been proposed in the paper. - Highlights: • A new chemiluminescence (CL) in the (NH{sub 4}){sub 2}Ce(NO{sub 3}){sub 2}-C{sub 6}H{sub 6}-H{sub 2}O system was discovered. • The emission of the Ce{sup 3+}* ion as a CL emitter has been registered for the first time. • Other emitters of this CL are

Siderophore-mediated oxidation of Ce and fractionation of HREE by Mn (hydr)oxide-coprecipitation and sorption on MnO2: Experimental evidence for negative Ce-anomalies in abiogenic manganese precipitates

Science.gov (United States)

Krämer, Dennis; Tepe, Nathalie; Bau, Michael

2014-05-01

We conducted experiments with Rare Earths and Yttrium (REY), where the REY were sorbed on synthetic manganese dioxide as well as on coprecipitating manganese (hydr)oxide in the presence and absence of the siderophore desferrioxamine-B (DFOB). Siderophores are a group of globally abundant biogenic complexing agents which are excreted by plants and bacteria to enhance the bioavailability of Fe in oxic environments. The model siderophore used in this study, DFOB, is a hydroxamate siderophore occurring in almost all environmental settings with concentrations in the nanomolar to millimolar range and is one of the most thoroughly studied siderophores. In the absence of siderophores and other organic ligands, trivalent Ce is usually surface-oxidized to tetravalent Ce during sorption onto manganese (hydr)oxides. Such Mn precipitates, therefore, often show positive Ce anomalies, whereas the ambient solutions exhibit negative Ce anomalies (Ohta and Kawabe, 2001). In marked contrast, however, REY sorption in the presence of DFOB produces negative Ce anomalies in the Mn precipitates and a distinct and characteristic positive Ce anomaly in the residual siderophore-bearing solution. Furthermore, the heavy REY with ionic radii larger than the radius of Sm are also almost completely prevented from sorption onto the Mn solid phases. Sorption of REY onto Mn (hydr)oxides in the presence of DFOB creates a distinct and pronounced fractionation of Ce and the heavy REY from the light and middle REY. Apart from Ce, which is oxidized in solution by the siderophore, the distribution of the other REY mimics the stability constants for multi-dentate complexes of REY with DFOB, as determined by Christenson & Schijf (2011). Heavier REY are forming stronger complexes (and are hence better "protected" from sorption) than light REY, excluding Ce. Preferential partitioning of Ce into the liquid phase during the precipitation of Mn (hydr)oxides has only rarely been described for natural Mn (hydr

Magnetic Phase Transitions of CeSb. I

DEFF Research Database (Denmark)

Fischer, Pernille Hertz; Lebech, Bente; Meier, G.

1978-01-01

The magnetic ordering of the anomalous antiferromagnet CeSb, which has a NaCl crystal structure, was determined in zero applied magnetic field by means of neutron diffraction investigations of single crystals and powder. Below the Neel temperature TN of (16.1+or-0.1)K, there exist six partially...... a first-order phase transition at TN. At approximately TN/2 there is a first-order phase transition to a FCC type IA low-temperature configuration. The unusual magnetic properties of CeSb, which result from anisotropic exchange and crystalline electric field effects, resemble those of certain actinide Na...

On the mechanism of nanoparticulate CeO{sub 2} toxicity to freshwater algae

Energy Technology Data Exchange (ETDEWEB)

Angel, Brad M., E-mail: Brad.Angel@csiro.au [Centre for Environmental Contaminants Research, CSIRO Land and Water Flagship, Locked Bag 2007, Kirrawee, NSW 2232 (Australia); Vallotton, Pascal [Digital Productivity Flagship, CSIRO, North Ryde, NSW 1670 (Australia); Apte, Simon C. [Centre for Environmental Contaminants Research, CSIRO Land and Water Flagship, Locked Bag 2007, Kirrawee, NSW 2232 (Australia)

2015-11-15

Highlights: • Nanoparticulate CeO{sub 2} less toxic than micron-sized CeO{sub 2}. • UV light filters prevented ROS generation by CeO{sub 2}. • ROS not toxic mechanism: CeO{sub 2} toxicity was similar in presence and absence of ROS. • Strong sorption of nanoparticulate CeO{sub 2} to Pseudokirchneriella subcapitata in synthetic fresh water. • CeO{sub 2} sorption to cells was prevented and toxicity mitigated in the presence of DOC. - Abstract: The factors affecting the chronic (72-h) toxicity of three nanoparticulate (10–34 nm) and one micron-sized form of CeO{sub 2} to the green alga, Pseudokirchneriella subcapitata were investigated. To characterise transformations in solution, hydrodynamic diameters (HDD) were measured by dynamic light scatter, zeta potential values by electrophoretic mobility, and dissolution by equilibrium dialysis. The protective effects of humic and fulvic dissolved organic carbon (DOC) on toxicity were also assessed. To investigate the mechanisms of algal toxicity, the CytoViva hyperspectral imaging system was used to visualise algal–CeO{sub 2} interactions in the presence and absence of DOC, and the role of reactive oxygen species (ROS) was investigated by ‘switching off’ ROS production using UV-filtered lighting conditions. The nanoparticulate CeO{sub 2} immediately aggregated in solution to HDDs measured in the range 113–193 nm, whereas the HDD and zeta potential values were significantly lower in the presence of DOC. Negligible CeO{sub 2} dissolution over the time course of the bioassay ruled out potential toxicity from dissolved cerium. The nanoparticulate CeO{sub 2} concentration that caused 50% inhibition of algal growth rate (IC50) was in the range 7.6–28 mg/L compared with 59 mg/L for micron-sized ceria, indicating that smaller particles were more toxic. The presence of DOC mitigated toxicity, with IC50s increasing to greater than 100 mg/L. Significant ROS were generated in the nanoparticulate CeO{sub 2

New toothed flying reptile from Asia: close similarities between early Cretaceous pterosaur faunas from China and Brazil.

Science.gov (United States)

Wang, Xiaolin; Kellner, Alexander W A; Jiang, Shunxing; Cheng, Xin

2012-04-01

Despite the great increase in pterosaur diversity in the last decades, particularly due to discoveries made in western Liaoning (China), very little is known regarding pterosaur biogeography. Here, we present the description of a new pterosaur from the Jiufotang Formation that adds significantly to our knowledge of pterosaur distribution and enhances the diversity of cranial anatomy found in those volant creatures. Guidraco venator gen. et sp. nov. has an unusual upward-directed frontal crest and large rostral teeth, some of which surpass the margins of the skull and lower jaw when occluded. The new species is closely related to a rare taxon from the Brazilian Crato Formation, posing an interesting paleobiogeographic problem and supporting the hypothesis that at least some early Cretaceous pterosaur clades, such as the Tapejaridae and the Anhangueridae, might have originated in Asia. The association of the new specimen with coprolites and the cranial morphology suggest that G. venator preyed on fish.

Electronic structure of heavy fermion system CePt2In7 from angle-resolved photoemission spectroscopy

International Nuclear Information System (INIS)

Shen Bing; Yu Li; Lyu Shou-Peng; Jia Xiao-Wen; Zhang Yan; Wang Chen-Lu; Hu Cheng; Ding Ying; Sun Xuan; Hu Yong; Liu Jing; Gao Qiang; Zhao Lin; Liu Guo-Dong; Liu Kai; Lu Zhong-Yi; Bauer, E D; Thompson, J D; Xu Zu-Yan; Chen Chuang-Tian

2017-01-01

We have carried out high-resolution angle-resolved photoemission measurements on the Ce-based heavy fermion compound CePt 2 In 7 that exhibits stronger two-dimensional character than the prototypical heavy fermion system CeCoIn 5 . Multiple Fermi surface sheets and a complex band structure are clearly resolved. We have also performed detailed band structure calculations on CePt 2 In 7 . The good agreement found between our measurements and the calculations suggests that the band renormalization effect is rather weak in CePt 2 In 7 . A comparison of the common features of the electronic structure of CePt 2 In 7 and CeCoIn 5 indicates that CeCoIn 5 shows a much stronger band renormalization effect than CePt 2 In 7 . These results provide new information for understanding the heavy fermion behaviors and unconventional superconductivity in Ce-based heavy fermion systems. (paper)

Scintillation characteristics of LiPO3:Ce3+ glass scintillators

International Nuclear Information System (INIS)

Shin, S. W.; Hwang, J. H.

2003-01-01

LiPO 3 :Ce 3+ glass scintillators doped with 0.5, 0.75, 1.0, 1.25 and 1.5wt% cerium as an activator were fabricated. For the best transparency of the LiPO 3 glasses, optimum heating conditions were investigated. Optimum heating temperature and time is 950 .deg. C and 90 min with 1wt% sugar add as reductant. The lattice structure of LiPO 3 :Ce 3+ glass scintillator was monoclinic, its lattice constants(a 0 , b 0 , c 0 ) being 16,490λ, 5.427λ and 13.120λ. Photo-refraction index of LiPO 3 :Ce 3 + measured by SE(Spectroscopic ellipsometry) was 1.45 ∼ 1.5 and its bandgap energy was 2.342 eV. The absorption spectral range of LiPO 3 :Ce 3+ measured by UV-VIS spectrophotometry was 350∼ 375nm and the spectral ranges of photoluminescence(PL) were 400∼450nm and 750∼900nm, its maximum PL intensity appeared at 417nm and 791nm. LiPO 3 :Ce 3 + glass scintillator doped with 0.75wt% cerium showed the best PL intensity. The PL intensity increased until cerium content reaches 0.75wt% above which ir decreased

Integrated chemical process for exothermic wave synthesis of high luminance YAG:Ce phosphors

International Nuclear Information System (INIS)

Won, C.W.; Nersisyan, H.H.; Won, H.I.; Youn, J.W.

2011-01-01

In this paper, high-luminance yellow-emitting Y 3 Al 5 O 12 :Ce 3+ phosphor (YAG:Ce) microparticles were prepared in a solid flame using a 1.425Y 2 O 3 +2.5Al 2 O 3 +0.15CeO 2 +k(KClO 3 +urea)+mNH 4 F precursor mixture (here k is the number of moles of the KClO 3 +urea red-ox mixture, and m is the number of moles of NH 4 F). The self-sustaining combustion process for the entire reaction sample was provided by the heat generated from the KClO 3 +urea mixture. Parametric studies demonstrated that the maximum temperature in the combustion wave varied from 885 to 1200 deg. C for k=2.0-3.0 mole and m=0-1.5 mole. X-ray analysis results showed that the product obtained in the solid flame consisted of Y 3 Al 5 O 12 :Ce 3+ and KCl phases. Therefore, after dissolving potassium chloride in distillated water, pure-phase YAG:Ce phosphor powder was obtained. The as-prepared YAG:Ce phosphor particles had diameters of 10-25 μm and good dispersity and exhibited luminescence properties comparable to those of YAG:Ce phosphor powders prepared by conventional high-temperature processing. - Highlights: → A new solid-flame strategy was developed for synthesizing high-luminance YAG:Ce phosphor. → Adding KClO 3 +CO(NH 2 ) 2 +NH 4 F mixture to oxide powders provides a low-temperature combustion process. → YAG:Ce phosphor particles 10-25 μm in diameter were obtained at 1000-1100 deg. C within tens of seconds. → As-prepared YAG:Ce emission intensity was 90.1-103.2% compared to that of the reference sample.

Electron paramagnetic resonance study of Ce doped partially stabilized ZrO2 crystals

Directory of Open Access Journals (Sweden)

Mikhail А. Borik

2017-09-01

Full Text Available ZrO2 (PSZ solid solutions crystals stabilized with yttrium and cerium oxides have been studied using electron paramagnetic resonance (EPR in the X and Q ranges. Zr3+ have been observed centers in the as-annealed ZrO2 crystals stabilized only by yttrium oxide (2.8 mol% Y2O3. Another type of paramagnetic-O-centers appear as a result of CeO2 addition to ZrO2 crystals along with yttrium oxide. To estimate the concentration of Ce3+ ions in PZS crystals, we recorded the EPR spectra in the presence of a reference at 7 K. Paramagnetic Ce3+ ions have been identified and their relative amount in the PSZ crystals before and after high-temperature heat treatment has been assessed. Annealing in air leads decreases the concentration of Ce3+ ions for all the test compositions and changes the color of the crystals from red to white. After annealing of the sample 2.0Y0.8Ce3Zr, the amount of paramagnetic Ce3+ ions decreased approximately twofold. Paramagnetic centers from Ce3+ have not been detected in the specimen with a low cerium content of 0.1 mol% after annealing which indicates the complete transition of Ce3+ to the Ce4+ state. We show that the forming cerium paramagnetic centers are bound by strong exchange interactions. No angular dependence of the EPR lines of the paramagnetic Ce3+ cations on the applied external magnetic field has been observed. Probable origin of the absence of angular dependence is that the impurity rare-earth ions are located close to one another, forming impurity clusters with an effective spin of Seff=1/2.

Scientific Objectives of China Chang E 4 CE-4 Lunar Far-side Exploration Mission

Science.gov (United States)

Zhang, Hongbo; Zeng, Xingguo; Chen, Wangli

2017-10-01

China has achieved great success in the recently CE-1~CE-3 lunar missions, and in the year of 2018, China Lunar Exploration Program (CLEP) is going to launch the CE-4 mission. CE-4 satellite is the backup satellite of CE-3, so that it also consists of a Lander and a Rover. However, CE-4 is the first mission designed to detect the far side of the Moon in human lunar exploration history. So the biggest difference between CE-4 and CE-3 is that it will be equipped with a relay satellite in Earth-Moon-L2 Point for Earth-Moon Communication. And the scientific payloads carried on the Lander and Rover will also be different. It has been announced by the Chinese government that CE-4 mission will be equipped with some new international cooperated scientific payloads, such as the Low Frequency Radio Detector from Holland, Lunar Neutron and Radiation Dose Detector from Germany, Neutral Atom Detector from Sweden, and Lunar Miniature Optical Imaging Sounder from Saudi Arabia. The main scientific objective of CE-4 is to provide scientific data for lunar far side research, including: 1)general spatial environmental study of lunar far side；2)general research on the surface, shallow layer and deep layer of lunar far side；3)detection of low frequency radio on lunar far side using Low Frequency Radio Detector, which would be the first time of using such frequency band in lunar exploration history .

Enhancement of room temperature ferromagnetic behavior of rf sputtered Ni-CeO_2 thin films

International Nuclear Information System (INIS)

Murugan, R.; Vijayaprasath, G.; Mahalingam, T.; Ravi, G.

2016-01-01

Highlights: • Ni-CeO_2 thin films deposited by using rf Magnetron sputtering with different concentrations of Ni. • Deposited thin films have single crystalline and uniform surface morphology. • Photoluminescence and micro-Raman spectra were interpreted for Ni-CeO_2 thin films. • XPS spectra confirmed Ni ions were present in the doped CeO_2 thin films. • Ni ions induced ferromagnetic behavior of Ni-CeO_2 films were confirmed through VSM. - Abstract: Ni-doped CeO_2 thin films were prepared under Ar"+ atmosphere on glass substrates using rf magnetron sputtering. To assess the properties of the prepared thin films, the influence of various amounts of Ni dopant on structural, morphological, optical, vibrational, compositional and magnetic properties of the CeO_2 films were studied by using X-Ray diffraction (XRD), atomic force microscope (AFM), photoluminescence (PL), micro-Raman, X-ray photoelectron spectroscopy (XPS) and vibrating sample magnetometer (VSM). XRD patterns for all the samples revealed the expected CeO_2 cubic fluorite-type structure and Ni ions were uniformly distributed in the samples. AFM images of the prepared samples indicate high dense, columnar structure with uniform distribution of CeO_2. Room-temperature photoluminescence (PL) and micro-Raman spectroscopic studies revealed an increase of oxygen vacancies with higher concentration of Ni in CeO_2. XPS results confirm the presence of Ni_2_p, O_1_s and Ce and depict that cerium is present as both Ce"4"+ and Ce"3"+ oxidation states in Ce_1_−_xNi_xO_2 (x = 15%) thin film. Field dependent magnetization measurements revealed a paramagnetic behavior for pure CeO_2, while a ferromagnetic behavior appeared when Ni is doped in CeO_2 films. Doping dependent magnetization measurements suggest that the observed ferromagnetism is due to the presence of metallic Ni clusters with nanometric size and broad size distribution.

Photoluminescent properties of Sr2CeO4: Eu3+ and Sr2CeO4: Eu2+ phosphors suitable for near ultraviolet excitation

International Nuclear Information System (INIS)

Suresh, K.; Poornachandra Rao, N.V.; Murthy, K.V.R.

2014-01-01

Powder phosphors of 1 mol% Eu 3+ - and Eu 2+ -doped strontium cerium oxide (Sr 2 CeO 4 ) were synthesized by standard solid-state reaction method. Eu 3+ - and Eu 2+ -doped Sr 2 CeO 4 phosphors fired at 1100 ℃ for 2 h were analysed by X-ray diffraction (XRD) and photoluminescence (PL) techniques. The XRD patterns confirm that the obtained phosphors are a single phase of Sr 2 CeO 4 composed of orthorhombic structure. Room temperature PL excitation spectrum of air-heated Sr 2 CeO 4 : Eu phosphor has exhibited bands at 260, 280 and 350 nm. Whereas the excitation spectrum of Sr 2 CeO 4 : Eu phosphor heated under reducing (carbon) atmosphere exhibited single broadband range from 260 to 390 nm. The (PL) emission peaks of both the phosphors at 467 (blue), 537 (green) and 616 nm (red) generate white light under 260, 280 and 350 nm excitation wavelengths. The Commission International de l'Eclairage (CIE) colour coordinates conforms that these phosphors emitting white light. The results reveal that these phosphors are multifunctional phosphors which emit white light under these excitations that they could be used as white components for display and lamp devices and as well as possible good light-conversion phosphor LEDs under near-ultraviolet (nUV) chip. (author)

Thorium and rare earth elements in crystal and brown sugar consumed in Brazil and Argentina

International Nuclear Information System (INIS)

Salles, Paula M.B. de; Campos, Tarcisio P. R. de

2015-01-01

Human exposure to contaminants in foods is a matter of general health concern. There is a growing interest in determine and quantify contaminants in food chain including natural radionuclides and rare earth elements (REE). Irradiation effects of radioactive nuclides and REE may cause lesions from their interaction with the human body. This study aimed to identify the presence of thorium and rare earth elements in crystal and brown sugar samples available for consumption in Brazil and Argentina. To determine the chemical elements, the 5g-sample methodology established at CDTN/CNEN, in Belo Horizonte, using the neutron activation technique, k 0 -method, was applied. The element Sm was determined in crystal sugar samples analyzed that were available to consumption in both countries. Similarly to the brown sugar samples which presented La, Sc and Sm. The elements Ce and Th were found in brown sugar sample available to consumption in Brazil. Thus, the detection of these elements in sugar samples is important insofar as the increasing consumption of sugar around the world. The presence of impurities and its concentration may contribute to health issues to consumers. (author)

Thorium and rare earth elements in crystal and brown sugar consumed in Brazil and Argentina

Energy Technology Data Exchange (ETDEWEB)

Salles, Paula M.B. de; Campos, Tarcisio P. R. de, E-mail: pauladesalles@yahoo.com.br [Universidade Federal de Minas Gerais (DEN/UFMG), Belo Horizonte, MG (Brazil). Departamento de Engenharia Nuclear; Menezes, Maria Angela de B.C., E-mail: menezes@cdtn.br [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

2015-07-01

Human exposure to contaminants in foods is a matter of general health concern. There is a growing interest in determine and quantify contaminants in food chain including natural radionuclides and rare earth elements (REE). Irradiation effects of radioactive nuclides and REE may cause lesions from their interaction with the human body. This study aimed to identify the presence of thorium and rare earth elements in crystal and brown sugar samples available for consumption in Brazil and Argentina. To determine the chemical elements, the 5g-sample methodology established at CDTN/CNEN, in Belo Horizonte, using the neutron activation technique, k{sub 0}-method, was applied. The element Sm was determined in crystal sugar samples analyzed that were available to consumption in both countries. Similarly to the brown sugar samples which presented La, Sc and Sm. The elements Ce and Th were found in brown sugar sample available to consumption in Brazil. Thus, the detection of these elements in sugar samples is important insofar as the increasing consumption of sugar around the world. The presence of impurities and its concentration may contribute to health issues to consumers. (author)

Luminescence properties of Ce3+ doped gadolinium-calcium-silicaborate glass scintillator

International Nuclear Information System (INIS)

Park, J.M.; Ha, D.H.; Kaewjeang, S.; Maghanemi, U.; Kothan, S.; Kaewkhao, J.; Kim, H.J.

2016-01-01

In this work, the Ce 3+ doped gadolinium-calcium-silicaborate glass scintillators of the composition ratio 25Gd 2 O 3 :10CaO:10SiO 2 :(55−x)B 2 O 3 :xCeF 3 , have been fabricated by using the melt-quenching technique. The doping concentration of the Ce 3+ was varied from 0.05 mol% to 2.5 mol%. The 4f-5d transition of the Ce 3+ allowed scintillation with a fast decay time. The absorption spectrum, X-ray induced emission spectrum, photo luminescence spectrum, laser luminescence spectrum and decay time of the scintillators were measured for studying the luminescence properties. From the X-ray induced emission spectrum result, we checked the trend between doping concentration and light yield. The laser induced luminescence spectrum was measured while changing the temperature from 300 K to 10 K. We also measured the decay time by using the laser excitation of the 0.15 mol% Ce 3+ doped glass scintillator. - Highlights: • Ce 3+ doped gadolinium-calcium-silicaborate glass scintillators were developed. • Glass is easily fabricated with large sizes and various doping materials. • The luminescence properties are studied by using various radiation sources. • The light yield and decay time were measured at low temperature. • One decay time component is found.

Tunable emission in Ln3+ (Ce3+/Dy3+, Ce3+/Tb3+) doped KNa3Al4Si4O16 phosphor synthesized by combustion method

Science.gov (United States)

Kolte, M. M.; Pawade, V. B.; Bhattacharya, A. B.; Dhoble, S. J.

2018-05-01

Ln3+ (Ln = Ce3+/Dy3+, Ce3+/Tb3+) doped KNa3Al4Si4O16 phosphor has been synthesized by Combustion method (CS) at 550° C successfully. Ln3+ (Ln = Ce3+, Dy3+, Tb3+) ions when doped in KNa3Al4Si4O16 host lattice, it shows blue and green emission band under the near Ultraviolet (NUV) excitation wavelength. The Photoluminescence excitation (PLE) and emission spectra are observed due to f-f and d-f transition of rare earth ions. Also, an effective energy transfer (ET) study from Ce3+ → Dy3+ and Ce3+ → Tb3+ ions has been studied and confirmed on the basis of Dexter-Foster theory. Further synthesized phosphor is well characterized by XRD, SEM, TEM and decay time measurement. However, the analysis of crystallite size, lattice strain has been studied by using theoretical as well as experimental techniques. Hence, the observed tunable emission in Ln3+ doped KNa3Al4Si4O16 phosphor may be applicable for solid state lighting technology.

CE of phytosiderophores and related metal species in plants.

Science.gov (United States)

Xuan, Yue; Scheuermann, Enrico B; Meda, Anderson R; Jacob, Peter; von Wirén, Nicolaus; Weber, Günther

2007-10-01

Phytosiderophores (PS) and the closely related substance nicotianamine (NA) are key substances in metal uptake into graminaceous plants. Here, the CE separation of these substances and related metal species is demonstrated. In particular, the three PS 2'-deoxymugineic acid (DMA), mugineic acid (MA), and 3-epi-hydroxymugineic acid (epi-HMA), and NA, are separated using MES/Tris buffer at pH 7.3. Moreover, three Fe(III) species of the different PS are separated without any stability problems, which are often present in chromatographic analyses. Also divalent metal species of Cu, Ni, and Zn with the ligands DMA and NA are separated with the same method. By using a special, zwitterionic CE capillary, even the separation of two isomeric Fe(III) chelates with the ligand ethylenediamine-N,N'-bis(o-hydroxyphenyl)acetic acid (EDDHA) is possible (i.e., meso-Fe(III)-EDDHA and rac-Fe(III)-EDDHA), and for fast separations of NA and respective divalent and trivalent metal species, a polymer CE microchip with suppressed EOF is described. The proposed CE method is applicable to real plant samples, and enables to detect changes of metal species (Cu-DMA, Ni-NA), which are directly correlated to biological processes.

Magnetic domains and frustration in metallic CePdAl

Energy Technology Data Exchange (ETDEWEB)

Lucas, Stefan; Huesges, Zita; Huang, Chien-Lung; Stockert, Oliver [Max Planck Institute CPfS, Dresden (Germany); Fritsch, Veronika; Sakai, Akito [EP 6, Electronic Correlations and Magnetism, University of Augsburg (Germany); Grube, Kai; Taubenheim, Christian; Loehneysen, Hilbert von [Karlsruhe Institute of Technology (Germany)

2016-07-01

Magnetic frustration is an exciting topic in condensed matter physics, since it can lead to new ground states of materials, e.g. a spin liquid or spin glass state. Effects of magnetic frustration have been investigated intensively for insulating materials. However, the existence of magnetic frustration in metallic systems is still under debate. CePdAl is a metallic Kondo system, where geometric magnetic frustration arises from the formation of Ce ions on a distorted Kagome lattice. Neutron scattering experiments revealed, that only two thirds of the magnetic Ce moments order antiferromagnetically below T{sub N}=2.7 K, whereas the other third remains mainly disordered. Thermodynamic as well as neutron scattering measurements are presented to verify the existence of partial magnetic frustration in CePdAl. Recently neutron diffraction experiments under magnetic fields applied along two orthogonal directions in the magnetically hard basal plane were performed. They show opposite effects on the magnetic intensity of a selected magnetic domain depending on the field direction with respect to the propagation vector. If this is only an effect of different domain population or also due to a change in magnetic frustration shall be discussed.

Room-temperature synthesis and photoluminescence of hexagonal CePO4 nanorods

Science.gov (United States)

Zhu, J.; Zhang, K.; Zhao, H. Y.

2018-01-01

Hexagonal CePO4 nanorods were synthesized via a simple chemical precipitation route at room-temperature without the presence of surfactants and then characterized by powder X-ray diffraction (XRD), energy-dispersive X-ray (EDX) spectrometry, scanning electron microscopy (SEM), transmission electron microscopy (TEM), ultraviolet-visible (UV-vis) absorption and photoluminescence (PL) spectroscopy. Hexagonal CePO4 nanorods exhibit strong ultraviolet absorption and ultraviolet luminescence, which correspond to the electronic transitions between 4f and 5d state of Ce3+ ions.

Study of CeO{sub x}, PrO{sub x}, and Ce{sub x}Pr{sub 1-x}O{sub 2-{delta}} films on Si(111) by means of high-energetic X-ray photoelectron spectroscopy; Untersuchung von CeO{sub x}-, PrO{sub x}- und Ce{sub x}Pr{sub 1-x}O{sub 2-{delta}}- Filmen auf Si (111) mittels hochenergetischer Roentgen-Photoelektronenspektroskopie

Energy Technology Data Exchange (ETDEWEB)

Allahgholi, Aschkan

2013-03-15

The intention of this work is to shed light on two much discussed topics in the study of rare earth oxides (REO) by hard x-ray photoelectron spectroscopy (HAXPES): (i) Due to the complex spectral shape of the Ce3d region, there have been many discussions on proper approaches to determine the concentration of Ce{sup 3+} and Ce{sup 4+} species in CeO{sub x} over the last decades. (ii) Recently, the true electron structure of rare earth oxides gained new attention, since ab initio calculations showed the necessity of considering additional inter atomic charge transfer to Ce5d levels. Using HAXPES and resonant HAXPES, the question of the true electronic structure of rare earth oxides is approached from the experimental side. As a third topic, the obtained results for cerium oxide and praseodymium oxide are applied in order to investigate the plasma oxidized mixed oxide Ce{sub x}Pr{sub 1-x}O{sub 2-{delta}} grown on Si(111) during thermal reduction. (orig.)

Air, aqueous and thermal stabilities of Ce3+ ions in cerium oxide nanoparticle layers with substrates

KAUST Repository

Naganuma, Tamaki

2014-01-01

Abundant oxygen vacancies coexisting with Ce3+ ions in fluorite cerium oxide nanoparticles (CNPs) have the potential to enhance catalytic ability, but the ratio of unstable Ce3+ ions in CNPs is typically low. Our recent work, however, demonstrated that the abundant Ce3+ ions created in cerium oxide nanoparticle layers (CNPLs) by Ar ion irradiation were stable in air at room temperature. Ce valence states in CNPs correlate with the catalytic ability that involves redox reactions between Ce3+ and Ce4+ ions in given application environments (e.g. high temperature in carbon monoxide gas conversion and immersion conditions in biomedical applications). To better understand the mechanism by which Ce3+ ions achieve stability in CNPLs, we examined (i) extra-long air-stability, (ii) thermal stability up to 500 °C, and (iii) aqueous stability of Ce 3+ ions in water, buffer solution and cell culture medium. It is noteworthy that air-stability of Ce3+ ions in CNPLs persisted for more than 1 year. Thermal stability results showed that oxidation of Ce 3+ to Ce4+ occurred at 350 °C in air. Highly concentrated Ce3+ ions in ultra-thin CNPLs slowly oxidized in water within 1 day, but stability was improved in the cell culture medium. Ce 3+ stability of CNPLs immersed in the medium was associated with phosphorus adsorption on the Ce3+ sites. This study also illuminates the potential interaction mechanisms of stable Ce3+ ions in CNPLs. These findings could be utilized to understand catalytic mechanisms of CNPs with abundant oxygen vacancies in their application environments. © The Royal Society of Chemistry 2014.

FDG-PET/ceCT is useful to predict recurrence of Pseudomyxoma peritonei

International Nuclear Information System (INIS)

Dubreuil, Julien; Skanjeti, Andrea; Giammarile, Francesco; Rousset, Pascal; Bakrin, Naoual; Passot, Guillaume; Isaac, Sylvie; Glehen, Olivier

2016-01-01

Pseudomyxoma peritonei (PMP) is a rare peritoneal neoplasm originating from appendicular tumours. There is no consolidated data available in the literature about the precise role of [ 18 F] fluorodesoxy-D-glucose Positron Emission Tomography / contrast enhanced Computed Tomography (FDG-PET/ceCT). The aim of this study was to evaluate the correlation between preoperative FDG-PET/ceCT (qualitative and semi-quantitative assessment) and progression free survival (PFS) of patients treated for PMP. All patients scheduled for PMP treatment by cytoreductive unicentric surgery, intraperitoneal chemotherapy (HIPEC), and who underwent a FDG-PET/ceCT between February 2008 and January 2014, were included. No previous treatment was performed (except biopsy or appendectomy). FDG-PET/ceCT was interpreted by two nuclear physicians in consensus. Positive FDG-PET/ceCT scans were further labelled in diffuse disease and poly/mono focal disease. SUVmax was measured based on post-operative reports. The Peritoneal Cancer Index (PCI) and Completeness of CytoReduction Score (CCR) were assessed after surgery. Fifty-six patients were included in this study, with a mean age of 56-years-old and a mean follow-up of 29.3 months. SUVmax, with a cut-off at 2.02, was predictive for the PFS on multivariate analysis. No differences were observed between diffuse disease and focal disease on PFS for progression free survival, PCI, and SUVmax (p = 0.1). Post-operative CCR was not significantly correlated with SUVmax or FDG-PET/ceCT qualitative assessment. SUVmax on preoperative FDG-PET/ceCT was an independent predictive factor for PFS in PMP. Further studies are needed to explore if FDG-PET/ceCT could potentially predict post-operative CCR. (orig.)

Building novel Ag/CeO{sub 2} heterostructure for enhancing photocatalytic activity

Energy Technology Data Exchange (ETDEWEB)

Leng, Qiang; Yang, Dezhi; Yang, Qi [Department of Applied Physics, Chongqing University, Chongqing 400044 (China); Hu, Chenguo, E-mail: hucg@cqu.edu.cn [Department of Applied Physics, Chongqing University, Chongqing 400044 (China); Kang, Yue; Wang, Mingjun [Department of Applied Physics, Chongqing University, Chongqing 400044 (China); Hashim, Muhammad [Department of Applied Physics, Chongqing University, Chongqing 400044 (China); Applied Physics Department, Federal Urdu University of Arts Science and Technology, Islamabad (Pakistan)

2015-05-15

Highlights: • Ag nanoparticle is designed to building Schottky heterojunction on CeO{sub 2} nanocube. • The photocatalytic activity of Ag/CeO{sub 2} heterostructure is much enhanced. • 95.33% of MB can be effectively degraded within half an hour. • Ag as acceptor of photoelectrons blocks the recombination of electron–hole pairs. - Abstract: Stable and recyclable photocatalysts with high efficiency to degrade organic contamination are important and widely demanded under the threat of the environment pollution. Ag/CeO{sub 2} heterostructure is designed as a photocatalyst to degrade organic dye under the simulated sunlight. The catalytic activity of CeO{sub 2} nanocubes (NCs) to degrade methylene blue (MB) is obviously enhanced when Ag nanoparticles (NPs) are deposited on the surface of them. The weight ratio of Ag and CeO{sub 2} in forming high efficiency catalyst, the amount of Ag/CeO{sub 2} catalyst used in degradation process, and the dye concentration and pH value of the initial MB solution are examined systematically. 95.33% of MB can be effectively degraded within half an hour when 50 mg of Ag/CeO{sub 2} catalyst in an optimal weight ratio of 1:3, is added to the 100 mL of MB solution (c{sub 0} = 1 × 10{sup −5} mol L{sup −1}, pH 6.2). The mechanism of the enhanced catalytic activity of Ag/CeO{sub 2} heterostructure is discussed. The photocatalytic degradation rate is found to obey pseudo-first-order kinetics equations according to Langmuir–Hinshelwood model. The intermediate products in different stages during the degradation of MB are analyzed.

Development of accident tolerant FeCrAl-ODS steels utilizing Ce-oxide particles dispersion

Science.gov (United States)

Shibata, Hiroki; Ukai, Shigeharu; Oono, Naoko H.; Sakamoto, Kan; Hirai, Mutsumi

2018-04-01

FeCrAl-ODS ferritic steels with Ce-oxide dispersion instead of Y-oxide were produced for the accident tolerant fuel cladding of the light water reactor. Excess oxygen (Ex.O) was added to improve the mechanical property. The tensile strength at Ex.O = 0 is around 200 MPa at 700 °C, mainly owing to dispersed Ce2O3 particles in less than 10 nm size. The formation of the fine Ce2O3 particles is dominated by a coherent interface with ferritic matrix. With increasing Ex.O, an increased of number density of coarser Ce-Al type oxide particles over 10 nm size is responsible for the improvement of the tensile strength. Change of the type of oxide particle, CeO2, Ce2O3, CeAlO3, Al2O3, in FeCrAl-ODS steel was thermodynamically analyzed as a parameter of Ex.O.

Luminescence and scintillation properties of YAG:Ce single crystal and optical ceramics

CERN Document Server

Mihóková, E; Mareš, J A; Beitlerová, A; Vedda, A; Nejezchleb, K; Blažek, K; D’Ambrosio, C

2007-01-01

We use various techniques to study optical and scintillation properties of Ce-doped yttrium aluminum garnet, Y3Al5O12 (YAG:Ce), in the form of a high-quality industrial single crystal. This was compared to optical ceramics prepared from YAG:Ce nanopowders. We present experimental data in the areas of optical absorption, radioluminescence, scintillation decay, photoelectron yield, thermally stimulated luminescence and radiation-induced absorption. The results point to an interesting feature—the absence of antisite (YAl, i.e. Y at the Al site) defects in optical ceramics. The scintillation decay of the ceramics is faster than that of the single crystal, but its photoelectron yield (measured with 1 μs integration time) is about 30–40% lower. Apart from the photoelectron yield value the YAG:Ce optical ceramic is fully comparable to a high quality industrial YAG:Ce single crystal and can become a competitive scintillator material.

GAGG:ce single crystalline films: New perspective scintillators for electron detection in SEM

International Nuclear Information System (INIS)

Bok, Jan; Lalinský, Ondřej; Hanuš, Martin; Onderišinová, Zuzana; Kelar, Jakub; Kučera, Miroslav

2016-01-01

Single crystal scintillators are frequently used for electron detection in scanning electron microscopy (SEM). We report gadolinium aluminum gallium garnet (GAGG:Ce) single crystalline films as a new perspective scintillators for the SEM. For the first time, the epitaxial garnet films were used in a practical application: the GAGG:Ce scintillator was incorporated into a SEM scintillation electron detector and it showed improved image quality. In order to prove the GAGG:Ce quality accurately, the scintillation properties were examined using electron beam excitation and compared with frequently used scintillators in the SEM. The results demonstrate excellent emission efficiency of the GAGG:Ce single crystalline films together with their very fast scintillation decay useful for demanding SEM applications. - Highlights: • First practical application of epitaxial garnet films demonstrated in SEM. • Improved image quality of SEM equipped with GAGG:Ce single crystalline thin film scintillator. • Scintillation properties of GAGG:Ce films compared with standard bulk crystal scintillators.

Luminescence and scintillation properties of Ce-doped Cs2ZnCl4 crystals

Science.gov (United States)

Sugawara, K.; Koshimizu, M.; Yanagida, T.; Fujimoto, Y.; Haruki, R.; Nishikido, F.; Kishimoto, S.; Asai, K.

2015-03-01

In this study, we have synthesized scintillation materials based on Ce-doped Cs2ZnCl4 crystals. The light yield was enhanced by up to 20% by doping Cs2ZnCl4 with Ce3+ ions. In the scintillation time profiles, fast components exhibited decay time constants on the order of nanoseconds, which was ascribed to Auger-free luminescence (AFL). The light yield of the AFL component decreased at 10 mol% Ce3+ concentration, which is mainly attributed to the reabsorption of AFL photons inside the crystals by Ce3+ ions, as seen in the scintillation spectra. Long components had decay time constants of approximately 30 ns. In addition, at 10 mol% Ce3+ concentration, a prominent band appeared at approximately 500 nm in the scintillation spectrum, which was not observed in the photoluminescence spectra. The long components in the scintillation time profiles and the 500 nm band in the scintillation spectra were tentatively attributed to self-trapped excitons perturbed by Ce3+ ions.

CeF3(Ba) radiation hard scintillator for electromagnetic calorimeters

International Nuclear Information System (INIS)

Aseev, A.A.; Devitsin, E.G.; Kozlov, V.A.; Hovepyan, Yu.I.; Potashov, S.Yu.; Sokolovsky, K.A.; Uvarova, T.V.; Vasilchenko, V.G.

1992-01-01

The influence of divalent fluoride dopants BaF 2 , CaF 2 , SrF 2 on radiation and luminescent properties of CeF 3 crystal is studied. A high radiation hardness (>10 8 rad) has been obtained for CeF 3 crystals doped with BaF 2 . (orig.)

Microstructure and corrosion resistance of Ni-based alloy laser coatings with nanosize CeO2 addition

Science.gov (United States)

Zhang, Shi Hong; Li, Ming Xi; Yoon, Jae Hong; Cho, Tong Yul; Zhu He, Yi; Lee, Chan Gyu

2008-07-01

Micron-size Ni-base alloy (NBA) powders were mixed with both 1.5 wt.% (hereinafter %) micron-size CeO2 (m-CeO2) and also 1.5% and 3.0% nano-size CeO2 (n- CeO2) powders. These mixtures were coated on low-carbon steel (Q235) by 2.0 kW CO2 laser cladding. The effects on the microstructures, phases and electrochemical corrosion of the coatings upon the addition of m- and n- CeO2 powders to NBA (m- and n- CeO2 /NBA) have been investigated. The results showed that a smooth coating was prepared under suitable processing parameters (P= 2.0 kW, V= 180 mm min- 1) by adding 1.5% n- CeO2. In addition to the primary phases of γ-Ni, Cr23 C6 and Ni3 B in the Ni-base alloy coating, CeNi3 was formed in Ni-base alloy coatings with both n- CeO2 and m-CeO2 particles, and CeNi5 appeared in the coating upon decreasing the size of CeO2 particles. Well-developed dendrites were observed in the Ni-base alloy coating; directional dendrites grew at the interface in the coating upon the addition of m-CeO2, whereas fine and multioriented dendrites grew upon decreasing the size of CeO2 particles to the nanoscale. Actinomorphic dendrites and compact equiaxed dendrites grew from the interface to near the surface upon increasing the content of n- CeO2 from 1.5 to 3.0%. In strongly acidic HNO3 solution, the severe corrosion of dendrites occurred and there were many corrosion pits in the Ni-base alloy coating; intercrystalline corrosion also has a dominant role upon the addition of m-CeO2, whereas uniform corrosion occurs in the coating as the size of CeO2 particles is decreased to nanoscale.

Microstructure and corrosion resistance of Ni-based alloy laser coatings with nanosize CeO2 addition

Directory of Open Access Journals (Sweden)

Shi Hong Zhang et al

2008-01-01

Full Text Available Micron-size Ni-base alloy (NBA powders were mixed with both 1.5 wt.% (hereinafter % micron-size CeO2 (m-CeO2 and also 1.5% and 3.0% nano-size CeO2 (n- CeO2 powders. These mixtures were coated on low-carbon steel (Q235 by 2.0 kW CO2 laser cladding. The effects on the microstructures, phases and electrochemical corrosion of the coatings upon the addition of m- and n- CeO2 powders to NBA (m- and n- CeO2 /NBA have been investigated. The results showed that a smooth coating was prepared under suitable processing parameters (P= 2.0 kW, V= 180 mm min- 1 by adding 1.5% n- CeO2. In addition to the primary phases of γ-Ni, Cr23 C6 and Ni3 B in the Ni-base alloy coating, CeNi3 was formed in Ni-base alloy coatings with both n- CeO2 and m-CeO2 particles, and CeNi5 appeared in the coating upon decreasing the size of CeO2 particles. Well-developed dendrites were observed in the Ni-base alloy coating; directional dendrites grew at the interface in the coating upon the addition of m-CeO2, whereas fine and multioriented dendrites grew upon decreasing the size of CeO2 particles to the nanoscale. Actinomorphic dendrites and compact equiaxed dendrites grew from the interface to near the surface upon increasing the content of n- CeO2 from 1.5 to 3.0%. In strongly acidic HNO3 solution, the severe corrosion of dendrites occurred and there were many corrosion pits in the Ni-base alloy coating; intercrystalline corrosion also has a dominant role upon the addition of m-CeO2, whereas uniform corrosion occurs in the coating as the size of CeO2 particles is decreased to nanoscale.

Toxicity of 144Ce inhaled in a relatively insoluble form by aged beagle dogs

International Nuclear Information System (INIS)

Boecker, B.B.; Hahn, F.F.; Muggenburg, B.A.; Mauderly, J.L.; McClellan, R.O.; Pickrell, J.A.

1980-01-01

The toxicity of relatively insoluble 144 Ce inhaled by 8- to 10.5-year-old beagle dogs is being investigated to provide information on possible age-related differences in the resulting long-term biological responses. Forty-two dogs were exposed, nose-only, to aerosols of 144 Ce in fused aluminosilicate particles to yield initial lung burdens of 2.2 to 75 μCi 144 Ce/kg body weight, and 12 control dogs were exposed to nonradioactive fused aluminosilicate particles. To date, 38 144 Ce-exposed dogs and 10 control dogs have died or were euthanized between 197 and 2375 days after inhalation of the 144 Ce. Prominent findings in the 144 Ce-exposed dogs were radiation pneumonitis in 19 dogs that died during the first 943 days post-exposure and neoplastic disease in seven of the 15 dogs. However, only one of these tumors killed the dog. No hemangiosarcomas have been observed in this study, although they were a prominent finding in immature or young adult dogs exposed to 144 Ce. Observations are continuing on the four surviving 144 Ce-exposed and two control dogs

Thermopower studies of doped CeAl sub 2 and UAl sub 2

CERN Document Server

Park, J G

1997-01-01

We have studied the thermopower of U doped CeAl sub 2 and Ce and La doped UAl sub 2. Despite different ground state properties of CeAl sub 2 and UAl sub 2 , the former being an antiferromagnetic heavy-fermion compound and the latter non-magnetic, we have found that not only thermopower data for pure CeAl sub 2 and UAl sub 2 are similar but also the thermopower results of doped samples behave similarly. Although the similarity seen in pure systems is yet to be understood, we interpret the doping effects as the results of changes in energy dependent relaxation time with doping. (author)

Radon gamma-ray spectrometry with YAP:Ce scintillator

CERN Document Server

Plastino, W; De Notaristefani, F

2002-01-01

The detection properties of a YAP:Ce scintillator (YAlO sub 3 :Ce crystal) optically coupled to a Hamamatsu H5784 photomultiplier with standard bialkali photocathode have been analyzed. In particular, the application to radon and radon-daughters gamma-ray spectrometry was investigated. The crystal response has been studied under severe extreme conditions to simulate environments of geophysical interest, particularly those found in geothermal and volcanic areas. Tests in water up to a temperature of 100 deg.C and in acids solutions such as HCl (37%), H sub 2 SO sub 4 (48%) and HNO sub 3 (65%) have been performed. The measurements with standard radon sources provided by the National Institute for Metrology of Ionizing Radiations (ENEA) have emphasized the non-hygroscopic properties of the scintillator and a small dependence of the light yield on temperature and HNO sub 3. The data collected in this first step of our research have pointed out that the YAP:Ce scintillator can allow high response stability for rad...

Quadrupole moment of the superdeformed band in 131Ce

International Nuclear Information System (INIS)

He, Y.; Godfrey, M.J.; Jenkins, I.; Kirwan, A.J.; Nolan, P.J.

1990-01-01

A mean lifetime measurement has been carried out on the states in the superdeformed band found in 131 Ce using the Doppler shift attenuation method (DSAM). The measured intrinsic nuclear quadrupole moment is Q o approx= 6 eb, assuming constant deformation, which corresponds to a quadrupole deformation β 2 approx= 0.35. This is considerably smaller than the value deduced for 132 Ce. (author)

Thermal properties of some cerium compounds, particularly CeB6

International Nuclear Information System (INIS)

Peysson, Y.

1986-09-01

Using measurements of specific heat between 0.3 to 250K in the absence of a magnetic field, and from 2 to 250K for magnetic fields between 0 and 8T, it is shown that the γ 8 quadruplet is the fundamental level of the Ce 3+ ion, the γ 8-7 separation energy being of the order of 500K. Detailed analysis suggests a lifting of degeneracy of the multiplet γ 8 in the paramagnetic phase, according to usual processes. Specific heat results obtained at very low temperatures reveal the importance of a significant gap in the spin wave energy spectra. Measurements under a strong magnetic field, around the two magnetic phase transitions of CeB6 show a spectacular reinforcement of the specific heat anomaly at a temperature of the order of T Q . Thermal conductivity of CEB6 is also studied in relation to the possible existence of a Jahn-Teller effect, likely to affect heat transfer by phonons. The problem of the different components of thermal transport prompts the analysis of the Weidemann-Franz law in the Kondo net, and also the study of the thermal conductivity of the compounds CeCu6, CeA12, the alloys Ce 0 . 7 5La 0 . 25 B 6 , Ce x La 1-x Cu 6 , and the fluctuating valence system SmB 6 . In all these bodies, an important contribution of phonons to electron transfer is shown. In the dense incoherent Kondo phase, it is not possible to envisage differences from the Weidemann-Franz law greater than those observed for highly diluted Kondo alloys [fr

Experimental evidence for self-assembly of CeO2 particles in solution: Formation of single-crystalline porous CeO2 nanocrystals

DEFF Research Database (Denmark)

Tan, Hui Ru; Tan, Joyce Pei Ying; Boothroyd, Chris

2012-01-01

Single-crystalline porous CeO2 nanocrystals, with sizes of ∼20 nm and pore diameters of 1-2 nm, were synthesized successfully using a hydrothermal method. Using electron tomography, we imaged the three-dimensional structure of the pores in the nanocrystals and found that the oriented aggregation ...... energy-loss spectroscopy. The oxygen vacancies might play an important role in oxygen diffusion in the crystals and the catalytic activities of single-crystalline porous CeO 2 structures. © 2011 American Chemical Society....

Electronic structure study of Co doped CeO2 nanoparticles using X-ray absorption fine structure spectroscopy

International Nuclear Information System (INIS)

Kumar, Shalendra; Gautam, Sanjeev; Song, T.K.; Chae, Keun Hwa; Jang, K.W.; Kim, S.S.

2014-01-01

Highlights: • The electronic structural of Co–CeO 2 nanoparticles is investigated using XAFS. • Ce M 5,4 , Ce L 3 and O K edge NEXAFS reveal that the Ce-ions are in +4 valence state. • The NEXAFS spectrum performed at Co L3,2-edge confirms Co-ion in 2+ state. • The EXAFS analysis also show that Co ions are occupying Ce position in doped CeO 2 . • The distances between Ce–O and Ce–Ce/Co in all shells decreases with Co doping. - Abstract: We investigated the electronic structure of well characterized Co doped CeO 2 nanoparticles using X-ray absorption fine structure (XAFS) spectroscopy. Near edge X-ray absorption fine structure (NEXAFS) spectra at Ce M 5,4 , Ce L 3 and O K-edge conclude that the Ce-ions are in +4 valence state in pure as well as in Co doped CeO 2 nanoparticles. The local structure around Ce-atom in Co doped CeO 2 nanoparticles was also determined using extended X-ray absorption fine structure (EXAFS) spectroscopy at Ce L 3 edge. The EXAFS analysis suggest that the inter-atomic distance of Ce–O, Ce–Ce/Co decreases with Co doping, which indicate a contraction of the lattice. The decease in Ce–O distance also reflect that there is a formation of oxygen vacancies in CeO 2 matrix. The Debye–Waller factor also shows the consistent behaviour for all the coordination shells. The atomic multiplet calculations for Co L 3,2 -edge was performed to determine the valence state, symmetry and field splitting, which reflect that Co-ions are in 2+ state and substituted at Ce-site with crystal field splitting of 10Dq=-0.57eV. The XAFS measurements reveal that the Co-ions occupy the Ce position in the CeO 2 host matrix and create a oxygen vacancy

Neutron scattering study of Ce3Au3Sb4

International Nuclear Information System (INIS)

Kasaya, Mitsuo; Katoh, Kenichi; Kohgi, Masahumi; Osakabe, Toyotaka

1993-01-01

Rare-earth compounds with an Y 3 Au 3 Sb 4 -type crystal structure are semiconductors or semi-metals. Among them, Ce 3 Au 3 Sb 4 is a semiconductor with an activation energy of about 640 K and shows no magnetic order down to 1.5 K. The magnetic part of the specific heat for Ce 3 Au 3 Sb 4 obtained by subtracting the value for La 3 Au 3 Sb 4 from the total specific heat of Ce 3 Au 3 Sb 4 shows a broad peak at around 10 K, the origin of which is well explained by the crystalline-field splitting determined by neutron scattering. (author)

Progress in heavy-fermion superconductivity. Ce115 and related materials

International Nuclear Information System (INIS)

Thompson, Joe D.; Fisk, Zachary

2012-01-01

Ce115 and related Ce compounds are particularly suited to detailed studies of the interplay of antiferromagnetic order, unconventional superconductivity and quantum criticality due to their availability as high quality single crystals and their tunability by chemistry, pressure and magnetic field. Neutron-scattering, NMR and angle-resolved thermodynamic measurements have deepened the understanding of this interplay. Very low temperature experiments in pure and lightly doped CeCoIn 5 have elaborated the FFLO-like magnetic state near the field-induced quantum-critical point. New, related superconducting materials have broadened the phase space for discovering underlying principles of heavy-fermion superconductivity and its relationship to nearby states. (author)

Study of the defect structure of ''pure'' and doped nonstoichiometric CeO2

International Nuclear Information System (INIS)

Blumenthal, R.N.

1975-09-01

Electrical conductivity and thermogravimetric measurements were made on Ta 2 O 5 -doped nonstoichiometric CeO 2 (i.e. Ce/sub 1-y/Ta/sub y/O/sub 2-x/ ) as a function of temperature and oxygen partial pressure. Over a limited range of temperature and nonstoichiometry, the isothermal dependence of the electrical conductivity on nonstoichiometry may be described by the equation sigma = A + Bx, where A is the electronic conductivity associated with the electronic defects produced by doping CeO 2 with Ta 2 O 5 . The electronic conductivity resulting from the nonstoichiometric defect reaction O/sup x/ + 2Ce/sub Ce//sup x/ = V 0 + 2Ce'sub Ce/ + 1 / 2 O 2 (g) is equal to Bx. The ionic conductivity may be described by the relation sigma/sub i/ = B[y+x]eμ'/sub V 0 / exp (--E/sub i//kT), and the electronic conductivity by the isothermal expressions sigma/sub e/ proportional to P/sub O 2 //sup -1/4/ and sigma/sub e/ proportional to x; x less than 3 x 10 -2 . These results are consistent with defect models involving doubly ionized oxygen vacancies. An empirical expression (i.e. Δ anti H/sub O 2 / proportional to y/2 or z/4) was obtained relating the dependence of Δ anti H/sub O 2 / on the dopant concentration of lower valent foreign cations (e.g. y/2 for Ce/sub 1-y/M/sub y/O/sub 2-y-x/ and z/4 for Ce/sub 1-z/M/sub z/O/sub 2-z/2-x/ where M = Ca, Sr and M' = Y, La). (auth)

Controlled hydrothermal synthesis of CeO{sub 2} nanospheres and their excellent magnetic properties

Energy Technology Data Exchange (ETDEWEB)

Niu, Xiaofei [Suzhou University, Anhui Key Laboratory of Spintronics and Nanomaterials Research, Suzhou, Anhui (China)

2017-04-15

Monodisperse spherical CeO{sub 2} nanostructures with irregular and rough surfaces have successfully been synthesized via a facile hydrothermal technology. XRD, SEM, XPS, Raman scattering, and M-H curves were employed to characterize the samples. The results showed that the spherical CeO{sub 2} nanostructures have a cubic fluorite structure and that there are Ce{sup 3+} ions and oxygen vacancies in the surface of the samples. The M-H curve of CeO{sub 2} nanospheres exhibits excellent room-temperature ferromagnetism (RT-FM), which is likely ascribed to the effects of the Ce{sup 3+} ions and oxygen vacancies. (orig.)

Ce que nous faisons | CRDI - Centre de recherches pour le ...

International Development Research Centre (IDRC) Digital Library (Canada)

Le CRDI appuie des travaux de recherche dans les pays en voie de développement en vue de produire un changement réel et durable. Ce savoir peut servir d'outil pour résoudre des problèmes mondiaux urgents. Nous partageons ce savoir avec les autres en :

Cerium intermetallics CeTX. Review III

Energy Technology Data Exchange (ETDEWEB)

Poettgen, Rainer; Janka, Oliver [Muenster Univ. (Germany). Inst. fuer Anorganische und Analytische Chemie; Chevalier, Bernard [Bordeaux Univ., Pessac (France). Inst. de Chimie de la Matiere Condensee de Bordeaux

2016-05-01

The structure-property relationships of CeTX intermetallics with structures other than the ZrNiAl and TiNiSi type are systematically reviewed. These CeTX phases form with electron-poor and electron-rich transition metals (T) and X = Mg, Zn, Cd, Hg, Al, Ga, In, Tl, Si, Ge, Sn, Pb, P, As, Sb, and Bi. The review focusses on the crystal chemistry, the chemical bonding peculiarities, and the magnetic and transport properties. Furthermore {sup 119}Sn Moessbauer spectroscopic data, high-pressure studies, hydrogenation reactions and the formation of solid solutions are reviewed. This paper is the third of a series of four reviews on equiatomic intermetallic cerium compound [Part I: R. Poettgen, B. Chevalier, Z. Naturforsch. 2015, 70b, 289; Part II: R. Poettgen, B. Chevalier, Z. Naturforsch. 2015, 70b, 695].

Ultraviolet-visible electroluminescence from metal-oxide-semiconductor devices with CeO2 films on silicon

International Nuclear Information System (INIS)

Lv, Chunyan; Zhu, Chen; Wang, Canxing; Li, Dongsheng; Ma, Xiangyang; Yang, Deren

2015-01-01

We report on ultraviolet-visible (UV-Vis) electroluminescence (EL) from metal-oxide-semiconductor (MOS) devices with the CeO 2 films annealed at low temperatures. At the same injection current, the UV-Vis EL from the MOS device with the 550 °C-annealed CeO 2 film is much stronger than that from the counterpart with the 450 °C-annealed CeO 2 film. This is due to that the 550 °C-annealed CeO 2 film contains more Ce 3+ ions and oxygen vacancies. It is tentatively proposed that the recombination of the electrons in multiple oxygen-vacancy–related energy levels with the holes in Ce 4f 1 energy band pertaining to Ce 3+ ions leads to the UV-Vis EL

Comprehensive characterization of lncRNA-mRNA related ceRNA network across 12 major cancers

Science.gov (United States)

Feng, Li; Li, Feng; Sun, Zeguo; Wu, Tan; Shi, Xinrui; Li, Jing; Li, Xia

2016-01-01

Recent studies indicate that long noncoding RNAs (lncRNAs) can act as competing endogenous RNAs (ceRNAs) to indirectly regulate mRNAs through shared microRNAs, which represents a novel layer of RNA crosstalk and plays critical roles in the development of tumor. However, the global regulation landscape and characterization of these lncRNA related ceRNA crosstalk in cancers is still largely unknown. Here, we systematically characterized the lncRNA related ceRNA interactions across 12 major cancers and the normal physiological states by integrating multidimensional molecule profiles of more than 5000 samples. Our study suggest the large difference of ceRNA regulation between normal and tumor states and the higher similarity across similar tissue origin of tumors. The ceRNA related molecules have more conserved features in tumor networks and they play critical roles in both the normal and tumorigenesis processes. Besides, lncRNAs in the pan-cancer ceRNA network may be potential biomarkers of tumor. By exploring hub lncRNAs, we found that these conserved key lncRNAs dominate variable tumor hallmark processes across pan-cancers. Network dynamic analysis highlights the critical roles of ceRNA regulation in tumorigenesis. By analyzing conserved ceRNA interactions, we found that miRNA mediate ceRNA regulation showed different patterns across pan-cancer; while analyzing the cancer specific ceRNA interactions reveal that lncRNAs synergistically regulated tumor driver genes of cancer hallmarks. Finally, we found that ceRNA modules have the potential to predict patient survival. Overall, our study systematically dissected the lncRNA related ceRNA networks in pan-cancer that shed new light on understanding the molecular mechanism of tumorigenesis. PMID:27580177

Optical and scintillating properties of Ce:Li(Y,Lu)F4 single crystals

International Nuclear Information System (INIS)

Yokota, Yuui; Kurosawa, Shunsuke; Chani, Valery; Kamada, Kei; Yoshikawa, Akira

2014-01-01

We have investigated the optical and scintillating properties of Lu co-doped Ce:LiYF 4 single crystals with various Lu content. In the transmittance and absorption spectra, the absorption peaks at 243 nm get systematically red shifted in contrast to the peaks at 197 and 200 nm which get blue shifted with the increase in Lu content. At the same time, emission peaks at 306 nm and 200 nm under 295 nm excitation also get red shifted. The decay time of Ce:Li(Y,Lu)F 4 crystals under 295 nm excitation is found to be faster than that of Ce:LiYF 4 and Ce:LiLuF 4 crystals. The alpha-peak positions in the pulse-height spectra and decay times of crystals under alpha-ray irradiation are found to vary with the Lu content. - Highlights: • Optical and scintillation properties of Ce:Li(Y 1-x Lu x )F 4 crystals were inspected. • Increase of Lu content resulted change of the position of four absorption peaks. • Admixing of Y and Lu decreased the light yield and increased the decay time. • The Ce:LiLuF 4 crystal indicated the largest light yield in the pulse-height spectra. • Li[(Y 0.8 Lu 0.2 ) 0.98 Ce 0.02 ]F 4 indicated larger light yield than Ce:LiYF 4 crystal

Synthesis of feather-like CeO2 microstructures and enzymatic electrochemical catalysis for trichloroacetic acid

Science.gov (United States)

Xiao, Xin; Zhang, Dong En; Zhang, Fan; Gong, Jun Yan; Zhang, Xiao Bo; Wang, Yi Hui; Ma, Juan Juan; Tong, Zhi Wei

Novel feather-like CeO2 microstructures were achieved by a thermal decomposition approach of Ce(OH)CO3 precursor. The Ce(OH)CO3 was obtained from a solvothermal method employing Ce(NO3)3.6H2O with C6H12N4 and C16H33(CH3)3NBr (CTAB) at 190∘C in a water-PEG-200 mixed solution. The feather-like CeO2 dendrite was obtained by thermal conversion of the feather-like Ce(OH)CO3 at 650∘C in air. A reasonable growth mechanism was proposed with the soft-template effect of PEG-200. The electrochemical behavior and enzyme activity of myoglobin (Mb) immobilized on CeO2-Nafion modified glassy carbon electrode (GCE) are demonstrated by cyclic voltammetric measurements. The results indicate that CeO2 can obviously promote the direct electron transfer between the Mb redox centers and the electrode. The Mb on CeO2-Nafion behaves as an elegant performance on the electrochemical reduction of trichloroacetic acid (TCA) from 0.32μM to 2.28μM. The detection limit is estimated to be 0.08μM.

Neutron diffraction study of the magnetic structures of CeMn2Ge2 and CeMn2Si2

International Nuclear Information System (INIS)

Fernandez-Baca, J.A.; Chakoumakos, B.C.; Hill, P.; Ali, N.

1995-01-01

The magnetic properties of the layered compounds of the form RMn 2 X 2 (R = Rare Earth, X = Si, Ge) have been thought to be sensitive to the intralayer Mn-Mn distance. Thus it has been reported that the Mn moments in CeMn 2 Si 2 are aligned antiferromagnetically (AF) below T N = 380K, while the Mn moments in CeMn 2 Ge 2 are ferromagnetic (FM) below T C = 316K. Recently, however, there has been some debate about the actual magnetic structures of this family of compounds, and for this reason the authors have performed high-resolution neutron powder diffraction measurements on these compounds for temperatures between 12K and 550K. The measurements indicate that at high temperatures both compounds are paramagnetic. Below T N = 380K CeMn 2 Si 2 becomes a collinear AF, with a structure similar to that reported by Siek et al. in which the magnetic propagation vector is τ = (0 0 1). CeMn 2 Ge 2 on the other hand, exhibits two different magnetic transitions. At T N ∼ 415K there is a transition to a collinear AF phase characterized by the commensurate propagation wavevector τ = (1 0 1). At T C = 318K there is a transition to a conical structure with a ferromagnetic component along the c-axis and a helical component in the ab plane. The helical component is characterized by the incommensurate propagation vector τ = (1 0 1-q z ), where q z is temperature dependent. These findings are consistent with the recent results of Welter et al

Ce+3-and Tb+3-luminescence in glasses. Ce+3-activated bulk silica and silica thin films. An α-particle detector based on a Ce+3-activated silica thin film. A Ce+3-Tb+3-energy transfer in a high melting point phosphate glass

International Nuclear Information System (INIS)

Heindl, R.; Loriers, J.; Sella, J.C.; Robert, A.

1984-07-01

While many Ce +3 -activated glasses of different type emit strongly under UV (253,7 nm) and β-ray excitation, only the commercial silicate glass NE 905 shows an useful emission when exposed to α-particles. Only phosphate glasses have give the green Tb +3 -emission, when doped by it, under UV and α and β radiation. Sputtered films of Ce +3 -activated silica have appropriate luminescence properties, adherence to the substrate and a perfect chemical resistance to hot nitric acid. An α-particle detector has been built which has permitted the quantitative detection of plutonium in the presence of other radiative ions

Reduced graphene oxide/CeO{sub 2} nanocomposite with enhanced photocatalytic performance

Energy Technology Data Exchange (ETDEWEB)

Kaur, Jasmeet, E-mail: jasmeet.dayal@gmail.com; Anand, Kanika; Singh, Gurpreet; Hastir, Anita; Virpal,; Singh, Ravi Chand [Laboratory For Sensors and Physics Education, Department of Physics, GND University, Amritsar-143005 (India); Anand, Kanica [Semiconductors Laboratory, Department of Physics, GND University, Amritsar– 143005 (India)

2015-05-15

In this work, reduced graphene oxide /cerium oxide (RGO/CeO{sub 2}) nanocomposite was synthesized by in situ reduction of cerium nitrate Ce(NO{sub 3}){sub 3}·6H{sub 2}O in the presence of graphene oxide by hydrazine hydrate (N{sub 2}H{sub 4}.H{sub 2}O). The intrinsic characteristics of as-prepared nanocomposite were studied using powder x-ray diffraction (XRD), Raman spectroscopy and field-emission scanning electron microscopy (FESEM). The photocatalytic degradation of methylene blue (MB) was employed as a model reaction to evaluate the photocatalytic activity of the RGO/CeO{sub 2} nanocomposite. The as-obtained RGO/CeO{sub 2} nanocomposite displays a significantly enhanced photocatalytic degradation of MB dye in comparison with bare CeO{sub 2} nanoparticles under sunlight irradiation, which can be attributed to the improved separation of electron-hole pairs and enhanced adsorption performance due to presence of RGO.

Synthesis of nanocrystalline CeO2 particles by different emulsion methods

International Nuclear Information System (INIS)

Supakanapitak, Sunisa; Boonamnuayvitaya, Virote; Jarudilokkul, Somnuk

2012-01-01

Cerium oxide nanoparticles were synthesized using three different methods of emulsion: (1) reversed micelle (RM); (2) emulsion liquid membrane (ELM); and (3) colloidal emulsion aphrons (CEAs). Ammonium cerium nitrate and polyoxyethylene-4-lauryl ether (PE4LE) were used as cerium and surfactant sources in this study. The powder was calcined at 500 °C to obtain CeO 2 . The effect of the preparation procedure on the particle size, surface area, and the morphology of the prepared powders were investigated. The obtained powders are highly crystalline, and nearly spherical in shape. The average particle size and the specific surface area of the powders from the three methods were in the range of 4–10 nm and 5.32–145.73 m 2 /g, respectively. The CeO 2 powders synthesized by the CEAs are the smallest average particle size, and the highest surface area. Finally, the CeO 2 prepared by the CEAs using different cerium sources and surfactant types were studied. It was found that the surface tensions of cerium solution and the type of surfactant affect the particle size of CeO 2 . - Graphical Abstract: The emulsion droplet size distribution and the TEM images of CeO 2 prepared by different methods: reversed micelle (RM), emulsion liquid membrane (ELM) and colloidal emulsion aphrons (CEAs). Highlights: ► Nano-sized CeO 2 was successfully prepared by three different emulsion methods. ► The colloidal emulsion aphrons method producing CeO 2 with the highest surface area. ► The surface tensions of a cerium solution have slightly effect on the particle size. ► The size control could be interpreted in terms of the adsorption of the surfactant.

Synthesis and luminescent study of Ce3+-doped terbium–yttrium aluminum garnet

International Nuclear Information System (INIS)

Dotsenko, V.P.; Berezovskaya, I.V.; Zubar, E.V.; Efryushina, N.P.; Poletaev, N.I.; Doroshenko, Yu.A.; Stryganyuk, G.B.; Voloshinovskii, A.S.

2013-01-01

Highlights: ► Ce 3+ -doped garnets (TYAG) were prepared using nanostructured reagents. ► The Ce 3+ ions cause a very efficient yellow emission of the samples. ► The reasons for the long wavelength position of this emission are discussed. ► Contribution from Al atoms to the conduction band of TYAG is quite essential. - Abstract: Terbium–yttrium aluminum garnets (TYAG) doped with Ce 3+ ions have been prepared by solid state reactions between nanostructured oxides of aluminum and rare earths. The luminescent properties of Ce 3+ ions in (Tb 0.8 Y 0.2 ) 3(1−x) Ce 3x Al 5 O 12 (x = 0.03) have been studied upon excitation in the 2–20 eV region. The substitution of Tb 3+ for Y 3+ in the garnet structure results in broadening the emission band and shifting its maximum towards the longer wavelengths. It was found that in addition to the 4f n → 4f n−1 5d excitation bands of Ce 3+ and Tb 3+ ions, the excitation spectra for the Ce 3+ emission contain broad bands at 6.73 and ∼9.5 eV. These bands are attributed to the Ce 3+ -bound exciton formation and O 2p → Al 3s, 3p transitions, respectively. In contrast to the predictions based on the results of electronic structure calculations on Y 3 Al 5 O 12 and Tb 4 Al 2 O 9 , the threshold of interband transitions in TYAG is at high energies (⩾7.3 eV), and contributions from Al tetr and Al oct atoms to the conduction-band density of states are evaluated as quite essential.

Design of high quality doped CeO2 solid electrolytes with nanohetero structure

International Nuclear Information System (INIS)

Mori, T.; Ou, D.R.; Ye, F.; Drennan, J.

2006-01-01

Doped cerium (CeO 2 ) compounds are fluorite related oxides which show oxide ionic conductivity higher than yttria-stabilized zirconia in oxidizing atmosphere. As a consequence of this, a considerable interest has been shown in application of these materials for low (400-650 o C) temperature operation of solid oxide fuel cells (SOFCs). In this paper, our experimental data about the influence of microstructure at the atomic level on electrochemical properties were reviewed in order to develop high quality doped CeO 2 electrolytes in fuel cell applications. Using this data in the present paper, our original idea for a design of nanodomain structure in doped CeO 2 electrolytes was suggested. The nanosized powders and dense sintered bodies of M doped CeO 2 (M:Sm,Gd,La,Y,Yb, and Dy) compounds were fabricated. Also nanostructural features in these specimens were introduced for conclusion of relationship between electrolytic properties and domain structure in doped CeO 2 . It is essential that the electrolytic properties in doped CeO 2 solid electrolytes reflect in changes of microstructure even down to the atomic scale. Accordingly, a combined approach of nanostructure fabrication, electrical measurement and structure characterization was required to develop superior quality doped CeO 2 electrolytes in the fuel cells. (author)

Calculations of coupled channels for the reaction 142Ce(α,α1)142 Ce*

International Nuclear Information System (INIS)

Appoloni, C.R.; Lepine, A.

1980-01-01

Elastic and inelastic angular distribution were made for α particles of 18 Mev in 142 Ce. It was determined the angular distributions corresponding to the various states of the target nucleus. The angular distributions corresponding to the first five states were analyzed within the framework of the Anarhmonic vibrational and symmetric rotational models. (A.C.A.S.) [pt

Reaction /sup 140/Ce (e, e'p), (2)

Energy Technology Data Exchange (ETDEWEB)

Saito, T; Shoda, K [Tohoku Univ., Sendai (Japan). Lab. of Nuclear Science

1975-06-01

An experiment was carried out to study the character of the resonance observed at 24.4 MeV in the /sup 140/Ce (..gamma.., p) /sup 139/La reaction. The (..gamma.., p/sub 0/ + p/sub 1/) cross section was measured at the angles of 54.7/sup 0/ and 125.3/sup 0/, at which the angle-dependent term of E1 becomes zero, for the energy range between 19 and 26 MeV. Existence of a peak due to the E2 resonance around 24.4 MeV was examined. The energy of incident electrons from a linear accelerator was changed between 20 and 26.7 MeV. The target was a Ce foil of 7.3 mg/cm/sup 2/ thick. The proton spectra due to the /sup 140/Ce (e, e' p) /sup 139/La reaction were measured with a broad range magnetic spectrometer. In the determined spectra of /sup 140/Ce (..gamma.., p/sub 0/+p/sub 1/) /sup 139/La, any remarkable peak, except one at 20.5 MeV, was not seen. From the observed spectra, the total cross section and the asymmetry factor due to interference were obtained as functions of energy. The values of the asymmetry factor were almost flat in the energy range between 19 and 26 MeV. The resonance at 24.4 MeV in the total cross section may be due to the E1 resonance, and is not due to the E2.

Preparation of Mn doped CeO{sub 2} nanoparticles with enhanced ferromagnetism

Energy Technology Data Exchange (ETDEWEB)

Ravi, S., E-mail: sravi@mepcoeng.ac.in; Winfred Shashikanth, F.

2017-06-15

Spherical-like CeO{sub 2} and Mn-doped CeO{sub 2} using 6-aminohexanoic acid as surfactant exhibit enhanced ferromagnetism. The optical absorption spectra reveal a red shift with a band gap of 2.51 eV. The mechanics of ferromagnetism and the red shift were analyzed. These results provide a promising platform for developing a dilute magnetic semiconductor in spintronics. - Highlights: • Pure and Mn-doped CeO{sub 2} is prepared with aminohexanoic acid as capping. • They exhibit wide optical absorption with red-shift in their band gap. • Mn-doped CeO{sub 2} nanoparticle exhibit hysteresis at room temperature. • Results were promising to use in spintronics and opto-electronics field.

Preoperative imaging in 78 living kidney donors using CE-MRA and DSA; Donor-Evaluation vor Lebendnierenspende: Vergleich von CE-MRA und DSA an 78 Patienten

Energy Technology Data Exchange (ETDEWEB)

Lemke, U.; Taupitz, M.; Hamm, B.; Kroencke, T.J. [Inst. fuer Radiologie, Charite - Universitaetsmedizin Berlin (Germany); Kluener, C. [Inst. fuer Radiologie und Neuroradiologie, Evangelisches Krankenhaus Oldenburg (Germany); Giessing, M.; Schoenberger, B. [Urologische Klinik und Poliklinik, Charite - Universitaetsmedizin Berlin (Germany)

2008-01-15

Purpose: to evaluate contrast-enhanced 3D magnetic resonance angiography (CE-MRA) and digital subtraction angiography (DSA) in comparison with the intraoperative findings in living kidney donors. Materials and methods: a total of 156 kidneys in 78 potential kidney donors were prospectively examined using CE-MRA (0.2 mmol Gd/kg, voxel size 1.3 x 0.8 x 2.0) and DSA. Two experienced radiologists assessed the images in consensus regarding the renal vascular anatomy and variants. The results for the 67 candidates accepted for donation were compared to the intraoperative findings. In the other kidneys not accepted for donor nephrectomy, MRA and DSA were compared with each other. Results: nineteen arterial variants were identified intraoperatively, of which 11 (58%) were also detected by preoperative CE-MRA and 10 (53%) by preoperative DSA. Of the 10 venous variants found intraoperatively, CE-MRA detected 8 (80%) and DSA 3 (30%). The agreement (kappa test) between MRI and DSA for all 156 evaluated kidneys was 0.7 for arterial variants (McNemar p = 0.12) and 0.3 for venous variants (McNemar p = 0.01). The preoperative choice of kidney (right or left) made on the basis of the renal vascular anatomy seen on CE-MRA and DSA differed in 22% of the 78 potential donors (McNemar P = 0.3). (orig.)

Crystal structure of the Ce2Ni2Zn15 compound

International Nuclear Information System (INIS)

Opainich, I.M.; Pavlyuk, V.V.; Bodak, O.I.; Cherny, R.; Yvon, K.

1996-01-01

A structure of a new ternary compound of the composition Ce2Ni2Zn15 (sp.gr.R3-barm,a=0.9080(3) nm, c=1.3294(3) nm) was determined on single-crystal and powder specimens. The study was performed on a Philips PW1100 automatic diffractometer and a DRON-4.07 powder diffractometer. The Ce2Ni2Zn15 compound is crystallized in the Ce2Al2Co15 structure type with the aluminum positions being occupied by nickel and cobalt positions being occupied by zinc

Photocatalytic activity of Ce-modified SBA-15 for the degradation of ...

Indian Academy of Sciences (India)

transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS) and N2 adsorption/desorption analysis. ... water.7,8,18 Existence of different sites of cerium ions and ... hydrocarbons.21 In this study, Ce-SBA-15 and Ce-Al-SBA-.

Study of CeI3 evaporation in the presence of group 13 metal-iodides

International Nuclear Information System (INIS)

Curry, J. J.; Lapatovich, W. P.; Henins, A.; Hardis, J. E.; Estupiñán, E. G.; Gibbs, J. M.; Shastri, S. D.

2014-01-01

The influences of GaI 3 , InI, and TlI on the evaporation characteristics of CeI 3 have been studied over the temperature range 900 K to 1400 K using x-ray induced fluorescence. The total vapor densities, summed over all atomic and molecular species, of Ce, I, In, and Tl were obtained. Measurements of Ce were limited to temperatures above 1033 K, the melting temperature of CeI 3 . This is the highest temperature range for which measurements of the vapor pressure of CeI 3 have been made. The vapor pressure of the CeI 3 monomer above the pure CeI 3 salt for temperatures exceeding its melting point can be approximated by log 10 p/Pa=11.24(±0.03)−10,690(±40) (T/K) −1 where the numbers in parentheses are standard uncertainties. InI and TlI were shown to modestly enhance the presence of Ce in the vapor phase, up to a factor of 5. GaI 3 produced no enhancement in this temperature range. Numerical simulations of the thermochemical equilibrium suggest the importance of both liquid-phase and vapor-phase complexes. Significant improvement to the method of absolute calibration is discussed

Numerical simulation of the geometrical-optics reduction of CE2 and comparisons to quasilinear dynamics

Science.gov (United States)

Parker, Jeffrey B.

2018-05-01

Zonal flows have been observed to appear spontaneously from turbulence in a number of physical settings. A complete theory for their behavior is still lacking. Recently, a number of studies have investigated the dynamics of zonal flows using quasilinear (QL) theories and the statistical framework of a second-order cumulant expansion (CE2). A geometrical-optics (GO) reduction of CE2, derived under an assumption of separation of scales between the fluctuations and the zonal flow, is studied here numerically. The reduced model, CE2-GO, has a similar phase-space mathematical structure to the traditional wave-kinetic equation, but that wave-kinetic equation has been shown to fail to preserve enstrophy conservation and to exhibit an ultraviolet catastrophe. CE2-GO, in contrast, preserves nonlinear conservation of both energy and enstrophy. We show here how to retain these conservation properties in a pseudospectral simulation of CE2-GO. We then present nonlinear simulations of CE2-GO and compare with direct simulations of quasilinear (QL) dynamics. We find that CE2-GO retains some similarities to QL. The partitioning of energy that resides in the zonal flow is in good quantitative agreement between CE2-GO and QL. On the other hand, the length scale of the zonal flow does not follow the same qualitative trend in the two models. Overall, these simulations indicate that CE2-GO provides a simpler and more tractable statistical paradigm than CE2, but CE2-GO is missing important physics.

CE-MS for metabolomics: developments and applications in the period 2012-2014.

Science.gov (United States)

Ramautar, Rawi; Somsen, Govert W; de Jong, Gerhardus J

2015-01-01

In the field of metabolomics, CE-MS is now regarded as a useful complementary analytical technique for the profiling of (highly) polar ionogenic metabolites in biological samples. Over the past few years, significant advancements have been made in CE-MS approaches for metabolic profiling studies. This paper, which is a follow-up of three previous review papers covering the years 2000-2012 [Electrophoresis 2009, 30, 276-291; Electrophoresis 2011, 32, 52-65; Electrophoresis 2013, 34, 86-98], provides an update of these developments covering the scientific literature from July 2012 to June 2014. Attention will be paid to novel interfacing techniques for coupling CE to MS and their implications for metabolomics studies. The potential of CEC-MS and MEKC-MS are also considered, and CE-MS systems for high-throughput metabolic profiling are discussed. The applicability of CE-MS for metabolomics studies is demonstrated by representative examples in the fields of biomedical, clinical, microbial, plant, environmental, and food metabolomics. An overview of recent CE-MS-based metabolomics studies is given in a table, which provides information on sample type and pretreatment, capillary coatings, and MS detection mode. Finally, general conclusions and perspectives are given. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Light response of YAP:Ce and LaBr{sub 3}:Ce scintillators to 4–30 MeV protons for applications to Telescope Proton Recoil neutron spectrometers

Energy Technology Data Exchange (ETDEWEB)

Cazzaniga, C., E-mail: carlo.cazzaniga@stfc.ac.uk [ISIS Facility, Science and Technology Facilities Council, Rutherford Appleton Laboratory, Didcot OX11 0QX (United Kingdom); Istituto di Fisica del Plasma “P. Caldirola”, Associazione EURATOM-ENEA/CNR, Via Cozzi 53, Milano (Italy); Cremona, A. [Istituto di Fisica del Plasma “P. Caldirola”, Associazione EURATOM-ENEA/CNR, Via Cozzi 53, Milano (Italy); Nocente, M.; Rebai, M.; Rigamonti, D. [Istituto di Fisica del Plasma “P. Caldirola”, Associazione EURATOM-ENEA/CNR, Via Cozzi 53, Milano (Italy); Università degli Studi di Milano-Bicocca, Dipartimento di Fisica, Piazza della Scienza 3, Milano (Italy); Tardocchi, M. [Istituto di Fisica del Plasma “P. Caldirola”, Associazione EURATOM-ENEA/CNR, Via Cozzi 53, Milano (Italy); Croci, G. [Istituto di Fisica del Plasma “P. Caldirola”, Associazione EURATOM-ENEA/CNR, Via Cozzi 53, Milano (Italy); Università degli Studi di Milano-Bicocca, Dipartimento di Fisica, Piazza della Scienza 3, Milano (Italy); Ericsson, G. [Department of Physics and Astronomy, EURATOM-VR Association, Uppsala University, Uppsala (Sweden); Fazzi, A. [Department of Energy of the Politecnico di Milano, via Lambruschini 4, I-20156 Milano (Italy); Hjalmarsson, A. [Department of Physics and Astronomy, EURATOM-VR Association, Uppsala University, Uppsala (Sweden); Mazzocco, M.; Strano, E. [Dipartimento di Fisica e Astronomia, Universitá di Padova, and INFN, Sez. di Padova, I-35131 Padova (Italy); and others

2016-06-01

The light response of two thin inorganic scintillators based on YAP:Ce and LaBr{sub 3}:Ce crystals has been measured with protons in the 4–8 MeV energy range at the Uppsala tandem accelerator and in the 8–26 MeV energy range at the Legnaro tandem accelerator. The crystals have been calibrated in situ with {sup 137}Cs and {sup 60}Co γ-ray sources. The relative light yields of protons with respect to gammas have been measured and are here reported to be (96±2)% and (80±2)% for YAP:Ce and LaBr{sub 3}:Ce, respectively. The results open up to the development of a Telescope Proton Recoil spectrometer based on either of the two crystals as alternative to a silicon based spectrometer for applications to high neutron fluxes.

Cosmic ray event in 994 C.E. recorded in radiocarbon from Danish oak

Science.gov (United States)

Fogtmann-Schulz, A.; Østbø, S. M.; Nielsen, S. G. B.; Olsen, J.; Karoff, C.; Knudsen, M. F.

2017-08-01

We present measurements of radiocarbon in annual tree rings from the time period 980-1006 Common Era (C.E.), hereby covering the cosmic ray event in 994 C.E. The new radiocarbon record from Danish oak is based on both earlywood and latewood fractions of the tree rings, which makes it possible to study seasonal variations in 14C production. The measurements show a rapid increase of ˜10‰ from 993 to 994 C.E. in latewood, followed by a modest decline and relatively high values over the ensuing ˜10 years. This rapid increase occurs from 994 to 995 C.E. in earlywood, suggesting that the cosmic ray event most likely occurred during the period between April and June 994 C.E. Our new record from Danish oak shows strong agreement with existing Δ14C records from Japan, thus supporting the hypothesis that the 994 C.E. cosmic ray event was uniform throughout the Northern Hemisphere and therefore can be used as an astrochronological tie point to anchor floating chronologies of ancient history.

Constraining Mantle Differentiation Processes with La-Ce and Sm-Nd Isotope Systematics

Science.gov (United States)

Willig, M.; Stracke, A.

2016-12-01

Cerium (Ce) and Neodymium (Nd) isotopic ratios in oceanic basalts reflect the time integrated La-Ce and Sm-Nd ratios, and hence the extent of light rare earth element element (LREE) depletion or enrichment of their mantle sources. New high precision Ce-Nd isotope data from several ocean islands define a tight array in ԑCe-ԑNd space with ԑNd = -8.2±0.4 ԑCe + 1.3±0.9 (S.D.), in good agreement with previous data [1, 2]. The slope of the ԑCe-ԑNd array and the overall isotopic range are sensitive indicators of the processes that govern the evolution of the mantle's LREE composition. A Monte Carlo approach is employed to simulate continuous mantle-crust differentiation by partial melting and recycling of crustal materials. Partial melting of mantle peridotites produces variably depleted mantle and oceanic crust, which evolve for different time periods, before the oceanic crust is recycled back into the mantle including small amounts of continental crust (GLOSS [3]). Subsequently, depleted mantle and recycled materials of variable age and composition melt, and the respective melts mix in different proportions. Mixing lines strongly curve towards depleted mantle, and tend to be offset from the data for increasingly older and more depleted mantle. Observed ԑCe-ԑNd in ridge [1] and ocean island basalts and the slope of the ԑCe-ԑNd array therefore define upper limits for the extent and age of LREE depletion preserved in mantle peridotites. Very old average mantle depletion ages (> ca. 1-2 Ga) for the bulk of the mantle are difficult to reconcile with the existing ԑCe-ԑNd data, consistent with the range of Nd-Hf-Os model ages in abyssal peridotites [4-6]. Moreover, unless small amounts of continental crust are included in the recycled material, it is difficult to reproduce the relatively shallow slope of the ԑCe-ԑNd array, consistent with constraints from the ԑNd - ԑHf mantle array [7]. [1] Makishima and Masuda, 1994 Chem. Geol. 118, 1-8. [2] Doucelance et al

Electrical and microstructural properties of Yb-doped CeO2

Directory of Open Access Journals (Sweden)

B. Matović

2014-06-01

Full Text Available Nanopowdered Ce1−xYbxO2−δ solid solutions (0 ≤ x ≤ 0.2 were synthesized by a self-propagating room temperature synthesis. XRD and SEM were used to study the properties of these materials as well as the Yb solubility in CeO2 lattice. Results showed that all the obtained powders were solid solutions with a fluorite-type crystal structure and with nanometric particle size. The average size of Ce1−xYbxO2−δ particles was approximately 3 nm. Electrochemical impedance spectroscopy for the sintered pellets depicted that it was possible to separate Rbulk and Rgb in the temperature interval of 550–800 °C. The activation energy for the bulk conduction was 1.03 eV and for grain boundary conduction was 1.14 eV. Grain boundary resistivity dominates over the other resistivities. These measurements confirmed that Yb3+-doped CeO2 material had a potential as electrolyte for intermediate-temperature solid oxide fuel cell applications.

Magnetic and transport properties of amorphous Ce-Al alloy

Science.gov (United States)

Amakai, Yusuke; Murayama, Shigeyuki; Momono, Naoki; Takano, Hideaki; Kuwai, Tomohiko

2018-05-01

Amorphous (a-)Ce50Al50 has been prepared by DC high-rate sputter method. The structure of the obtained sample has been confirmed to have an amorphous structure because there are no Bragg peaks in the X-ray diffraction measurement and have a clear exothermic peak by the differential scanning calorimetry measurement. We have measured the resistivity ρ, magnetic susceptibility χ, specific heat Cp and thermoelectric power S for a-Ce50Al50. The temperature dependence of ρ exhibits a small temperature dependence less than 10% in the whole temperature region. χ follows a Curie-Weiss behavior in the high-temperature region of T>90 K. The effective paramagnetic moment peff, estimated from C is 2.18 μB/Ce-atom. The low-temperature Cp/T increases rapidly with decreasing temperature and tends to a saturation. S(T) exhibits negative values in a wide temperature region. A minimum of S appear at around 60 K, and S decreases linearly with decreasing temperature down to 10 K. The low-temperature S is almost 0 μV/K down to 2 K. From these results, we have pointed out that present a-Ce50Al50 would be an incoherent Kondo material.

/sup 54/Fe(p vector,d)/sup 53/Fe and /sup 140/Ce(p vector,d)/sup 139/Ce reactions at 122 MeV

Energy Technology Data Exchange (ETDEWEB)

Dickey, S A; Kraushaar, J J; Shepard, J R [Colorado Univ., Boulder (USA). Nuclear Physics Lab.; Miller, D W; Jacobs, W W; Jones, W P [Indiana Univ., Bloomington (USA). Dept. of Physics

1985-08-05

The /sup 54/Fe(p vector,d)/sup 53/Fe and /sup 140/Ce(p vector,d)/sup 139/Ce reactions have been studied at a proton energy of 122 MeV. Analyzing powers and angular distributions were obtained for outgoing deuterons to the strong low-lying single-particle states in both nuclei. These data along with the data of others at 26, 29, 41, 52 and 24, 35, 55 MeV for /sup 54/Fe and /sup 140/Ce respectively, have been compared with exact-finite-range DWBA calculations carried out in a consistent fashion to determine the energy dependence of the spectroscopic factors. A strong energy dependence was noticed for the spectroscopic factors when the l-values were large.

The isolation of 139Ce after production by a proton-induced nuclear reaction on praseodymium

International Nuclear Information System (INIS)

Van der Walt, T.N.; Vermeulen, C.

2004-01-01

A method, based on anion exchange chromatography, is presented for the isolation of 139 Ce after production by a proton-induced nuclear reaction on a thick praseodymium target. After bombardment the target is dissolved in nitric acid and 139 Ce oxidised to the Ce(IV) oxidation state with bromic acid. 139 Ce is then separated form the praseodymium by anion exchange chromatography on a Ag MP-1 resin column in a nitric acid - bromic acid mixture. 139 Ce is sorbed onto the resin column and praseodymium eluted with the acid mixture. The bromic acid is washed out of the column with nitric acid and 139 Ce finally eluted with dilute nitric acid containing sulphur dioxide

Fergusonite-type CeNbO{sub 4+δ}: Single crystal growth, symmetry revision and conductivity

Energy Technology Data Exchange (ETDEWEB)

Bayliss, Ryan D. [Department of Materials, Imperial College London, Prince Consort Road, London, SW7 2BP (United Kingdom); Pramana, Stevin S.; An, Tao; Wei, Fengxia; Kloc, Christian L. [School of Materials Science and Engineering, 50 Nanyang Avenue, Nanyang Technological University, 639798 (Singapore); White, Andrew J.P. [Chemical Crystallography Laboratory, Department of Chemistry, Imperial College London, Exhibition Road, London, SW7 2AZ (United Kingdom); Skinner, Stephen J. [Department of Materials, Imperial College London, Prince Consort Road, London, SW7 2BP (United Kingdom); White, Timothy J. [School of Materials Science and Engineering, 50 Nanyang Avenue, Nanyang Technological University, 639798 (Singapore); Baikie, Tom, E-mail: tbaikie@ntu.edu.sg [School of Materials Science and Engineering, 50 Nanyang Avenue, Nanyang Technological University, 639798 (Singapore)

2013-08-15

Large fergusonite-type (ABO{sub 4}, A=Ce, B=Nb) oxide crystals, a prototype electrolyte composition for solid oxide fuel cells (SOFC), were prepared for the first time in a floating zone mirror furnace under air or argon atmospheres. While CeNbO{sub 4} grown in air contained CeNbO{sub 4.08} as a minor impurity that compromised structural analysis, the argon atmosphere yielded a single phase crystal of monoclinic CeNbO{sub 4}, as confirmed by selected area electron diffraction, powder and single crystal X-ray diffraction. The structure was determined in the standard space group setting C12/c1 (No. 15), rather than the commonly adopted I12/a1. AC impedance spectroscopy conducted under argon found that stoichiometric CeNbO{sub 4} single crystals showed lower conductivity compared to CeNbO{sub 4+δ} confirming interstitial oxygen can penetrate through fergusonite and is responsible for the higher conductivity associated with these oxides. - Graphical abstract: Large fergusonite-type CeNbO{sub 4} crystals were prepared for the first time in a floating zone mirror furnace. Crystal growth in an argon atmosphere yielded a single phase monoclinic CeNbO4, as confirmed by selected area electron diffraction, powder and single crystal X-ray diffraction. The structure was determined in the standard space group setting C12/c1 (No. 15), rather than the commonly adopted I12/a1. AC impedance spectroscopy found CeNbO{sub 4} single crystals showed lower conductivity compared to CeNbO{sub 4+δ} confirming interstitial oxygen can penetrate through fergusonite and is responsible for the higher conductivity associated with these oxides. Highlights: • Preparation of single crystals of CeNbO{sub 4} using a floating zone mirror furnace. • Correction to the crystal symmetry of the monoclinic form of CeNbO{sub 4}. • Report the conductivity of a single crystal of CeNbO{sub 4}.

The CE marking in the dimension stone sector: difficulties, contradictions, possible solutions

Science.gov (United States)

Primavori, Piero

2017-04-01

In accordance with the requirements of the CPR 305/11, no stone products (covered by harmonized standards) can be introduced in the EU market, irrespective of their country of origin, unless they are supported with a Declaration of Performance (DoP) and CE certificate (= CE Marking). The CE marking became compulsory for all stone and marble products as early as 2003, under the legal framework of the CPD 89/106/CE, the EU Directive which, on July 1st, 2013, has been officially replaced by the CPR 305/11. The CE Marking of construction products has been described as one of the most significant change being faced by the construction industry for a decade. Nevertheless, after thirteen years from the introduction of the first products standard, serious difficulties for the CE Marking application still exist. The aim of this contribution is to draw the attention on the effective meaningfulness, applicability and reliability of the CE Marking, on the related aspects for the economic operators (manufacturers, authorized representatives, importers, distributors etc.) and, most of all, for the customers. The following topics and issues are dealt with: - Criteria of the mandatory tests; - Criteria for testing procedures (meaningfulness/reliability/frequency of the TT); - Non-applicability of the testing methods in particular circumstances; - Economic aspects for the companies; - Interpretation of the FPC philosophy; - Formulation of the finished products standards; - Traceability criteria of the stone material; - Threshold-values for the acceptance of a stone material; - Guarantees for the manufacturers and for the customers; - Effective precision and reliability of the DoP and related consequences for manufacturers and customers.

Ruthenium nanoparticles supported on CeO2 for catalytic permanganate oxidation of butylparaben.

Science.gov (United States)

Zhang, Jing; Sun, Bo; Guan, Xiaohong; Wang, Hui; Bao, Hongliang; Huang, Yuying; Qiao, Junlian; Zhou, Gongming

2013-11-19

This study developed a heterogeneous catalytic permanganate oxidation system with ceria supported ruthenium, Ru/CeO2 (0.8‰ as Ru), as catalyst for the first time. The catalytic performance of Ru/CeO2 toward butylparaben (BP) oxidation by permanganate was strongly dependent on its dosage, pH, permanganate concentration and temperature. The presence of 1.0 g L(-1) Ru/CeO2 increased the oxidation rate of BP by permanganate at pH 4.0-8.0 by 3-96 times. The increase in Ru/CeO2 dosage led to a progressive enhancement in the oxidation rate of BP by permanganate at neutral pH. The XANES analysis revealed that (1) Ru was deposited on the surface of CeO2 as Ru(III); (2) Ru(III) was oxidized by permanganate to its higher oxidation state Ru(VI) and Ru(VII), which acted as the co-oxidants in BP oxidation; (3) Ru(VI) and Ru(VII) were reduced by BP to its initial state of Ru(III). Therefore, Ru/CeO2 acted as an electron shuttle in catalytic permanganate oxidation process. LC-MS/MS analysis implied that BP was initially attacked by permanganate or Ru(VI) and Ru(VII) at the aromatic ring, leading to the formation of various hydroxyl-substituted and ring-opening products. Ru/CeO2 could maintain its catalytic activity during the six successive runs. In conclusion, catalyzing permanganate oxidation with Ru/CeO2 is a promising technology for degrading phenolic pollutants in water treatment.

Ordering and Fluctuation of Quantum Multipoles in CeB6

International Nuclear Information System (INIS)

Shiina, R.

2003-01-01

The effect of multipolar fluctuations on the quadrupolar phase transition in CeB 6 is investigated theoretically. It is shown that the fluctuations become strong and field-dependent, reflecting the competition of coupled multipolar interactions. Some unusual phenomena around the transition in CeB 6 are shown to be reasonably explained within the RKKY model. (author)

Synthesis of Mixed Cu/Ce Oxide Nanoparticles by the Oil-in-Water Microemulsion Reaction Method

Science.gov (United States)

Pemartin-Biernath, Kelly; Vela-González, Andrea V.; Moreno-Trejo, Maira B.; Leyva-Porras, César; Castañeda-Reyna, Iván E.; Juárez-Ramírez, Isaías; Solans, Conxita; Sánchez-Domínguez, Margarita

2016-01-01

Cerium oxide and mixed Cu/Ce oxide nanoparticles were prepared by the oil-in-water (O/W) microemulsion reaction method in mild conditions. The Cu/Ce molar ratio was varied between 0/100 and 50/50. According to X-ray diffraction (XRD), below 30/70 Cu/Ce molar ratio, the materials presented a single phase consistent with cubic fluorite CeO2. However, above Cu/Ce molar ratio 30/70, an excess monoclinic CuO phase in coexistence with the predominant Cu/Ce mixed oxide was detected by XRD and High-Resolution Transmission Electron Microscopy (HRTEM). Raman spectroscopy showed that oxygen vacancies increased significantly as the Cu content was increased. Band gap (Eg) was investigated as a function of the Cu/Ce molar ratio, resulting in values from 2.91 eV for CeO2 to 2.32 eV for the mixed oxide with 30/70 Cu/Ce molar ratio. These results indicate that below 30/70 Cu/Ce molar ratio, Cu2+ is at least partially incorporated into the ceria lattice and very well dispersed in general. In addition, the photodegradation of Indigo Carmine dye under visible light irradiation was explored for selected samples; it was shown that these materials can remove such contaminants, either by adsorption and/or photodegradation. The results obtained will encourage investigation into the optical and photocatalytic properties of these mixed oxides, for widening their potential applications. PMID:28773602

Synthesis of Mixed Cu/Ce Oxide Nanoparticles by the Oil-in-Water Microemulsion Reaction Method

Directory of Open Access Journals (Sweden)

Kelly Pemartin-Biernath

2016-06-01

Full Text Available Cerium oxide and mixed Cu/Ce oxide nanoparticles were prepared by the oil-in-water (O/W microemulsion reaction method in mild conditions. The Cu/Ce molar ratio was varied between 0/100 and 50/50. According to X-ray diffraction (XRD, below 30/70 Cu/Ce molar ratio, the materials presented a single phase consistent with cubic fluorite CeO2. However, above Cu/Ce molar ratio 30/70, an excess monoclinic CuO phase in coexistence with the predominant Cu/Ce mixed oxide was detected by XRD and High-Resolution Transmission Electron Microscopy (HRTEM. Raman spectroscopy showed that oxygen vacancies increased significantly as the Cu content was increased. Band gap (Eg was investigated as a function of the Cu/Ce molar ratio, resulting in values from 2.91 eV for CeO2 to 2.32 eV for the mixed oxide with 30/70 Cu/Ce molar ratio. These results indicate that below 30/70 Cu/Ce molar ratio, Cu2+ is at least partially incorporated into the ceria lattice and very well dispersed in general. In addition, the photodegradation of Indigo Carmine dye under visible light irradiation was explored for selected samples; it was shown that these materials can remove such contaminants, either by adsorption and/or photodegradation. The results obtained will encourage investigation into the optical and photocatalytic properties of these mixed oxides, for widening their potential applications.

Volta potential of clad AA2024 aluminium after exposure to CeCl3 solution

International Nuclear Information System (INIS)

Andreatta, F.; Druart, M.-E.; Marin, E.; Cossement, D.; Olivier, M.-G.; Fedrizzi, L.

2014-01-01

Highlights: • Alkaline etch of clad AA2024 enhances precipitation of Ce compounds. • Exposure to CeCl 3 solution decreases Volta potential of alkaline etched substrate. • Ce compounds reduce the driving force for initiation of localized attack. - Abstract: AA2024 clad with AA1050 was immersed in CeCl 3 solution to promote deposition of cerium species. The deposition occurs on the entire sample surface for the alkaline etched substrate, while it is very limited for the degreased substrate. The surface potential (Volta potential) was investigated by scanning Kelvin probe force microscopy after different immersion times in CeCl 3 solution. The preferential deposition of Ce compounds at Al–Fe intermetallic sites progressively reduces their Volta potential difference relative to the matrix in the alkaline etched substrate. This reduces the susceptibility to localized attack of the intermetallics as proven by potentiodynamic polarization measurements

Luminescent properties of Y3Al5−xGaxO12:Ce crystals

International Nuclear Information System (INIS)

Zorenko, Yu.; Zorenko, T.; Malinowski, P.; Sidletskiy, O.; Neicheva, S.

2014-01-01

Absorption, luminescent and scintillation properties of Ce 3+ doped Y 3 Al 5−x Ga x O 12 crystals with Ga content in the x=1–5 range were investigated in this work and compared with the properties of YAG:Ce crystals. Apart from the traditional spectral methods (absorption, cathodoluminescence and light yield measurements), the intrinsic and Ce 3+ related luminescence of Y 3 Al 5−x Ga x O 12 :Ce solid-solution were also investigated using the luminescent spectroscopy under excitation by synchrotron radiation in the 3.7–25 eV range. We show that the optical properties Y 3 Al 5−x Ga x O 12 :Ce garnets monotonically change with increasing the Ga content in the x=0–3 range due to preferable localization of Ga ions in the tetrahedral position of the garnet lattice. At the highest Ga concentration (x>3) the deviation of the optical properties of Y 3 Al 5−x Ga x O 12 :Ce garnets is observed from the respective properties of these crystals with Ga content in the x=0–3 range due to occupation by Ga ions of the octahedral position in the garnet host. - Highlights: • Different dependence of optical properties of Y 3 Al 5−x Ga x O 12 :Ce crystals on Ga content in x=0–3 and 3–5 ranges. • Elimination of the luminescence of Y Al antisite defects in Y 3 Al 5−x Ga x O 12 :Ce crystals at x>2. • Significant improvement of the scintillation properties of Y 3 Al 5−x Ga x O 12 :Ce crystals at x=2 and 3 in comparison with YAG:Ce

Investigation into kinetics of redox interaction in the system Ce(4) β-diketonate-additional ligand

International Nuclear Information System (INIS)

Anufrieva, S.I.; Snezhko, N.I.; Pechurova, N.I.; Martynenko, L.N.; Spitsyn, V.I.

1981-01-01

The rate of reduction of β-diketonate complexes of Ce(4) to Ce(3) β-diketonates in benzene solution in the presence and in the absence of additional ligands is studied using spectrophotometry. The rate of reduction of Ce(4) β-diketonates increases in the series Ce(TTFA) 4 4 4 4 4 (TTFA - thenoyltrifluoroacetone, DPM- --dipivaloylmethane, DBM - dibenzoylemethane, BA benzoylacetone, AA - acetylaceton). The studied phosphorus-containing additional ligands as to their effect on the rate of Ce (4) reduction can be arranged in the following order: trioctylphosphine oxide>triphenylphosphine oxide>tributyl phosphate [ru

Physicochemical compatibility of SrCeO3 with potential SOFC cathodes

International Nuclear Information System (INIS)

Tolchard, J.; Grande, T.

2007-01-01

The chemical and physical compatibility of SrCeO 3 is investigated with respect to LaMO 3 (M=Mn, Fe, Co) and La 2-x Sr x NiO 4 (x=0, 0.8), via the reaction of fine-grained powder compacts and solid-state diffusion couples. Compositions were chosen so as to give predictive insight into possible candidate materials for all-oxide electrochemical devices. Results show the primary reaction in these systems to be the dissolution of SrO from SrCeO 3 into the LaMO 3 /La 2-x Sr x NiO 4 , and corresponding formation of La-doped CeO 2 . Reaction kinetics are observed to be relatively fast, with element profiles suggesting the diffusion of Sr 2+ in ceria to be surprisingly rapid. It is demonstrated that perovskite starting materials represent poor candidates for use with SrCeO 3 , reacting completely to form Ruddlesden-Popper/K 2 NiF 4 type oxides. Reaction with La 2 NiO 4 is less pronounced, and formation of secondary phases suppressed for the composition La 1.2 Sr 0.8 NiO 4 . It is thus concluded that Ruddlesden-Popper type oxides represent good candidate materials for use with a SrCeO 3 -based electrolytes when doped with appropriate levels of Sr. - Graphical abstract: Assessment of the SrCeO 3 proton conductor shows this material to have poor chemical compatibility with LaMO 3 perovskite systems, but predicts coexistence with Ruddlesden-Popper type oxides

Bio diesel synthesis from pongamia pinnata oil over modified CeO2 catalysts

International Nuclear Information System (INIS)

Venkatesh; Sathgatta Z, M. S.; Manjunatha, S.; Thammannigowda V, V.

2014-01-01

This study investigates the use of CeO 2 , ZrO 2 , Mg O and CeO 2 -ZrO 2 , CeO 2 -Mg O, CeO 2 -ZrO 2 -Mg O mixed oxides as solid base catalysts for the transesterification of Pongamia pinnata oil with methanol to produce bio diesel. SO 4 2- /CeO 2 and SO 4 2- /CeO 2 -ZrO 2 were also prepared and used as solid acid catalysts for esterification of Pongamia pinnata oil (P-oil) to reduce the % of free fatty acid (FFA) in P-oil. The oxide catalysts were prepared by an incipient wetness impregnation method and characterized by techniques such as NH 3 -Tpd for surface acidity, CO 2 -Tpd for surface basicity and powder X-ray diffraction for crystallinity. The effect of nature of the catalyst, methanol to P-oil molar ratio and reaction time in esterification as well as in transesterification was investigated. The catalytic materials were reactive d and reused for five reaction cycles and the results showed that the ceria based catalysts have reasonably good reusability both in esterification and transesterification reaction. The test results also revealed that the CeO 2 -ZrO 2 modified with Mg O could have potential for use in the large scale bio diesel production. (Author)

Relationship between Microstructure and Properties of Cu-Cr-Ag-(Ce) Alloy Using Microscopic Investigation.

Science.gov (United States)

Chen, Huiming; Yuan, Dawei; Wu, Shanjiang; Wang, Hang; Xie, Weibin; Yang, Bin

2017-01-01

Microstructure, precipitation hardening response, and mechanical and physical properties of Cu-Cr-Ag alloy and Cu-Cr-Ag-Ce alloy have been investigated using transmission electron microscopy, scanning electron microscope, optical microscope, electrical conductivity analysis, and tensile test. The influence of element Ce on the matrix refinement, impurity removal, and precipitation in the Cu-Cr-Ag alloys has been analyzed. The experimental results show that the strength and electrical conductivity of Ce containing alloys are greater than those of Ce-free alloys after each processing step. Improvement of strength and electrical conductivity of the Cu-Cr-Ag alloy by adding Ce element is attributed to removing oxygen and sulfur from as-cast alloy.

Photocatalytic degradation mechanisms of self-assembled rose-flower-like CeO2 hierarchical nanostructures

International Nuclear Information System (INIS)

Sabari Arul, N.; Mangalaraj, D.; Whan Kim, Tae

2013-01-01

Hierarchical rose-flower-like CeO 2 nanostructures were formed by using solvothermal and thermal annealing processes. The CeCO 3 OH thin film was transformed into CeO 2 roses due to thermal annealing. CeO 2 nanostructured roses exhibited excellent photocatalytic activity with a degradation rate of 65% for the azo dye acid orange 7 (AO7) under ultraviolet illumination. The fitting of the absorbance maximum versus time showed that the degradation of AO7 obeyed pseudo-first-order reaction kinetics. The enhancement of the photocatalytic activity for the CeO 2 roses was attributed to the high adsorptivity resulting from the surface active sites and special 4f electron configuration.

NMR study of CeTe at low temperatures

Energy Technology Data Exchange (ETDEWEB)

Hinderer, J. [Laboratorium fuer Festkoerperphysik, ETH Zuerich, CH-8093 Zurich (Switzerland)]. E-mail: hinderer@phys.ethz.ch; Weyeneth, S.M. [Laboratorium fuer Festkoerperphysik, ETH Zuerich, CH-8093 Zurich (Switzerland); Weller, M. [Laboratorium fuer Festkoerperphysik, ETH Zuerich, CH-8093 Zurich (Switzerland); Gavilano, J.L. [Laboratorium fuer Festkoerperphysik, ETH Zuerich, CH-8093 Zurich (Switzerland); Felder, E. [Laboratorium fuer Festkoerperphysik, ETH Zuerich, CH-8093 Zurich (Switzerland); Hulliger, F. [Laboratorium fuer Festkoerperphysik, ETH Zuerich, CH-8093 Zurich (Switzerland); Ott, H.R. [Laboratorium fuer Festkoerperphysik, ETH Zuerich, CH-8093 Zurich (Switzerland)

2006-05-01

We present {sup 125}Te NMR measurements on CeTe powder at temperatures between 1 and 150K and in magnetic fields between 5 and 8T. CeTe is a rocksalt-type intermetallic compound. It orders antiferromagnetically at T{sub N}{approx}2.2K with a much reduced ordered moment [H.R. Ott, J.K. Kjems, F. Hulliger, Phys. Rev. Lett. 42 20 (1979) 1378]. From our low-temperature NMR spectra we infer the presence of at least three inequivalent Te sites at low temperatures. Considering the crystal structure this result is completely unexpected. The linewidths and the Knight shifts of the individual lines are significantly different and increase substantially with decreasing temperature. They follow the temperature dependence of the magnetic susceptibility above 20K. Above T{sub N}, hyperfine fields of 1.6, 0.8 and 0.0T at the three Te sites per Bohr magneton of Ce moment are deduced from Knight shift vs. magnetic susceptibility data. These values are typical for transferred hyperfine fields via conduction electrons.

Tumour targeting with monovalent fragments of anti-neuroblastoma antibody chCE7

International Nuclear Information System (INIS)

Carrel, F.; Novak-Hofer, I.; Ruch, C.; Zimmermann, K.; Amstutz, H.

1997-01-01

The in vitro and in vivo behaviour of the monovalent single chain (scFv) and Fab-fragments derived from anti-neuroblastoma antibody chCE7 is reported. When comparing tumour uptake and -retention of radioactivity of 67 Cu-labelled monovalent chCE7 with divalent chCE7 F(ab') 2 the advantage of the radiocopper label over the radioiodine label was more pronounced with the divalent (internalising) F(ab') 2 fragments. (author) 1 fig., 1 ref

Novel nanostructured CeO 2 as efficient catalyst for energy and ...

Indian Academy of Sciences (India)

We report here versatile methods to engineer the microstructure and understand the fundamental physicochemical properties of CeO2 to improve its catalytic viability for practical applications. In this context, different morphologies of CeO2 are synthesized using tailored homogeneous precipitation methods and ...

Positivity-preserving space-time CE/SE scheme for high speed flows

KAUST Repository

Shen, Hua

2017-03-02

We develop a space-time conservation element and solution element (CE/SE) scheme using a simple slope limiter to preserve the positivity of the density and pressure in computations of inviscid and viscous high-speed flows. In general, the limiter works with all existing CE/SE schemes. Here, we test the limiter on a central Courant number insensitive (CNI) CE/SE scheme implemented on hybrid unstructured meshes. Numerical examples show that the proposed limiter preserves the positivity of the density and pressure without disrupting the conservation law; it also improves robustness without losing accuracy in solving high-speed flows.

Positivity-preserving space-time CE/SE scheme for high speed flows

KAUST Repository

Shen, Hua; Parsani, Matteo

2017-01-01

We develop a space-time conservation element and solution element (CE/SE) scheme using a simple slope limiter to preserve the positivity of the density and pressure in computations of inviscid and viscous high-speed flows. In general, the limiter works with all existing CE/SE schemes. Here, we test the limiter on a central Courant number insensitive (CNI) CE/SE scheme implemented on hybrid unstructured meshes. Numerical examples show that the proposed limiter preserves the positivity of the density and pressure without disrupting the conservation law; it also improves robustness without losing accuracy in solving high-speed flows.

Spray deposited CeO2–TiO2 counter electrode for electrochromic ...

Indian Academy of Sciences (India)

Abstract. Optically passive thin films of CeO2–TiO2 mixed oxides with molar ratio of Ce/Ti of 0.05 were deposited by the spray pyrolysis technique (SPT) on a glass and fluorine-doped tin oxide (FTO)-coated glass substrates. Precur- sor solution containing cerium nitrate hexahydrate (Ce(NO3)2·6H2O) and titanium ...

Optical and structural properties of nanostructured CeO2:Tb3+ film

International Nuclear Information System (INIS)

Ansari, Anees A.; Singh, S.P.; Malhotra, B.D.

2011-01-01

Nanostructured CeO 2 :Tb 3+ film has been fabricated on glass substrate through sol-gel technique via dip-coating process. (NH 4 ) 2 Ce(NO 3 ) 6 , Tb(NO 3 ) 3 .6H 2 O, ethylene glycol have been used as precursors for sol preparation. X-ray diffraction (XRD), scanning electron microscopy (SEM), UV/VIS and photoluminescence (PL) spectral studies have been employed to analyze the structural and optical properties of the film. XRD pattern has been used to analyze the crystallite nature and calculated particle size by Scherrer equation of nanostructured CeO 2 :Tb 3+ film, found in the range 3-4 nm. SEM image has been observed to analyze the surface topography of the film which is well porous, highly agglomerated and uniformly distributed nanoparticles on the film surface. Optical band gap of nanostructured CeO 2 :Tb 3+ film has been estimated as 3.57 eV. A significant enhancement in band shape of CeO 2 :Tb 3+ spectrum has been observed in PL spectra, showed their promising usages as optical materials in optoelectronic devices.

ELEKTRİKLİ EV ALETLERİNDE CE UYUMLULUĞU VE BİR UYGULAMA

Directory of Open Access Journals (Sweden)

Nazmi EKREN

2009-01-01

Full Text Available Hızla gelişen teknoloji, artan rekabet ortamı ve kullanıcının bilinçlenmesi gibi nedenlerden dolayı kaliteli üretim yapmanın gerekliliği günümüzde daha da artmıştır. Ürün kalitesinin ve güvenilirliğinin belgelenmesi tüketici açısından şart olmuştur. Ürün güvenliğinin belgelenmesinde kullanılan birçok belge vardır. Bu belgelerden biri de CE belgesidir. Bu makalede, CE işareti ile ilgili temel bilgi verilmiş ve elektrikli ev aletleri için gerekli CE standartları ve testlerinden bahsedilmiştir. Örnek olarak elektrikli ev aletlerinden tost makinesi ele alınmış, incelenmiştir. Tost makinesine CE belgesi almak için EN60335-2-9 direktifine göre gerekli testler yapılmış ve CE belgesi alınmıştır.

Constitutive Model for Hot Deformation of the Cu-Zr-Ce Alloy

Science.gov (United States)

Zhang, Yi; Sun, Huili; Volinsky, Alex A.; Wang, Bingjie; Tian, Baohong; Liu, Yong; Song, Kexing

2018-02-01

Hot compressive deformation behavior of the Cu-Zr-Ce alloy has been investigated according to the hot deformation tests in the 550-900 °C temperature range and 0.001-10 s-1 strain rate range. Based on the true stress-true strain curves, the flow stress behavior of the Cu-Zr-Ce alloy was investigated. Microstructure evolution was observed by optical microscopy. Based on the experimental results, a constitutive equation, which reflects the relationships between the stress, strain, strain rate and temperature, has been established. Material constants n, α, Q and ln A were calculated as functions of strain. The equation predicting the flow stress combined with these materials constants has been proposed. The predicted stress is consistent with experimental stress, indicating that developed constitutive equation can adequately predict the flow stress of the Cu-Zr-Ce alloy. Dynamic recrystallization critical strain was determined using the work hardening rate method. According to the dynamic material model, the processing maps for the Cu-Zr and Cu-Zr-Ce alloy were obtained at 0.4 and 0.5 strain. Based on the processing maps and microstructure observations, the optimal processing parameters for the two alloys were determined, and it was found that the addition of Ce can promote the hot workability of the Cu-Zr alloy.

Interaction of Pd single atoms with different CeO2 crystal planes: A first-principles study

Science.gov (United States)

He, Bingling; Wang, Jinlong; Ma, Dongwei; Tian, Zhixue; Jiang, Lijuan; Xu, Yan; Cheng, Sujun

2018-03-01

The adsorption of single Pd atoms on the various CeO2 surfaces, including (111), (110), and (100), has been studied based on the first-principles calculations. It is found that, according to the calculated adsorption energy, interaction strength between Pd and the three CeO2 surfaces follows the order of (100) > (110) > (111). Interestingly, the effect of the electron localization on the surface Ce ions due to the Pd adsorption on its adsorption stability is more significant for the (110) surface than that for the (111) and (100) surfaces. We also find that the formal oxidation states of Pd0, Pdδ+ (δ < 1) and Pd1+ may appear on the CeO2 (111) surface, and Pdδ+ (δ < 1) and Pd1+ could coexist on the CeO2 (100) surfaces. However, under suitable conditions the CeO2 (110) surface may be covered with Pd2+ ions. Present theoretical results clearly suggest that the interaction between Pd and CeO2 nanocrystals significantly depends on the crystal planes of CeO2. It is expected that our study will give useful insights into the effect of CeO2 crystal plane on the physicochemical and catalytic properties of CeO2 supported Pd catalyst.

Kinetics of a redox reaction in the system Ce(IV) β-diketonate - additional ligand

International Nuclear Information System (INIS)

Anufrieva, S.I.; Snezhko, N.I.; Pechurova, N.I.; Martynenko, L.N.; Spitsyn, V.I.

1982-01-01

Preparation of solutions containing stable compounds of Ce(IV) with organic ligands is difficult, because even strong Ce(IV) complexes undergo intramolecular reduction and have a tendency to hydrolysis. It is known that Ce(IV) β-diketonates have different resistances to reduction inorganic solvents, depending on the structure. Using spectrophotometric analysis we have investigated the oxidation-reduction characteristics of solutions of certain Ce(IV) β-diketonates in benzene in the absence and presence of neutral ligands containing donor O or N atoms

Inverse CeO2sbnd Fe2O3 catalyst for superior low-temperature CO conversion efficiency

Science.gov (United States)

Luo, Yongming; Chen, Ran; Peng, Wen; Tang, Guangbei; Gao, Xiaoya

2017-09-01

The paper presents a rational design of highly efficient and affordable catalysts for CO oxidation with a low operating temperature. A series of ceria-iron catalysts were inversely built via a co-precipitation method. The catalytic activity of low-temperature CO oxidation was much higher with CeO2-modified Fe2O3 (CeO2sbnd Fe2O3) than with Fe2O3-modified CeO2 (Fe2O3sbnd CeO2). In particular, the 7.5% CeO2sbnd Fe2O3 catalyst had the highest activity, reaching 96.17% CO conversion at just 25 °C. Catalyst characterization was carried out to explore the cause of the significantly different CO conversion efficiencies between the Fe2O3sbnd CeO2 and Fe2O3sbnd CeO2 catalysts. HRTEM showed a significant inhomogeneous phase in 7.5% CeO2sbnd Fe2O3 with small CeO2 nanoparticles highly dispersed on the rod-shaped Fe2O3 surface. Furthermore, the 7.5% CeO2sbnd Fe2O3 composite catalyst exhibited the highest ratios of Fe2+/Fe3+ and Ce3+/Ce4+ as well as the largest pore volume. These properties are believed to benefit the CO conversion in 7.5% CeO2sbnd Fe2O3.

Crystal growth and magnetic property of a new compound CeAu4Si2

International Nuclear Information System (INIS)

Nakashima, Hiroshi; Thamizhavel, Arumugam; Matsuda, Tatsuma D.; Haga, Yoshinori; Takeuchi, Tetsuya; Sugiyama, Kiyohiro; Settai, Rikio; Onuki, Yoshichika

2006-01-01

We have succeeded in growing a new ternary Ce compound CeAu 4 Si 2 . This compound crystallizes in the tetragonal crystal structure P4-bar m2 (-bar 1-bar 1-bar 5) with lattice parameters a=4.3304 -bar A and c=27.409 -bar A. The local environment around Ce atoms is similar to that of the well-known ThCr 2 Si 2 -type tetragonal structure in CeAu 2 Si 2 . Single crystals of CeAu 4 Si 2 were grown by the flux method using an Au 4.37 Si eutectic alloy as flux. Electrical resistivity, specific heat and magnetization measurements revealed a ferromagnetic ordering at T C =5.3 -bar K with a saturation moment of 1.7-bar μ B /Ce. Anisotropic features in the magnetic susceptibility and magnetization were well explained by a crystalline electric field (CEF) model. Estimated excitation energies from the ground state doublet to two excited doublets are 284 and 340-bar K, respectively

Atomic character of the 4d-absorption of Ce metal

International Nuclear Information System (INIS)

Wolff, H.W.; Bruhn, R.; Radler, K.; Sonntag, B.

1976-08-01

The photoabsorption of atomic Ce has been determined in the energy range from 100 eV to 150 eV. Except for very small deviations, the 4d-spectra of atomic and mettalic Ce are identical. The resonances near the 4d-threshold are ascribed to 4d 10 4f → 4d 9 4f 2 transitions. (orig.) [de

Magnetic and transport properties of Ce 6MnSb 15

Science.gov (United States)

Godart, Claude; Rogl, Peter; Alleno, Eric; Gonçalves, António P.; Rouleau, Olivier

2006-05-01

In our effort to look for new Ce/Yb-based compounds with large unit cell, we studied Ce 6MnSb 15. Rietveld refinements of X-ray powder diffraction confirm that the material crystallizes in orthorhombic structure La 6MnSb 15-type, Imm2 space group, with 2 Ce sites (8e and 4d) and lattice parameters a=15.1643 Å, b=19.3875 Å and c=4.2794 Å, which closely agree with those already published. Magnetic susceptibility results show a paramagnetic behavior and no magnetic order down to 2 K in contrast to antiferromagnetic order previously reported at 7 K. Resistivity shows a metallic behavior and the Seebeck coefficient is very low, typically -2 μV/K.

Polarity driven morphology of CeO2(1 0 0) islands on Cu(1 1 1)

International Nuclear Information System (INIS)

Stetsovych, O.; Beran, J.; Dvořák, F.; Mašek, K.; Mysliveček, J.; Matolín, V.

2013-01-01

Thin ceria films supported by metal substrates represent important model systems for reactivity studies in heterogeneous catalysis. Here we report the growth study of the polar CeO 2 (1 0 0) phase as part of a mixed CeO 2 (1 1 1)–CeO 2 (1 0 0) thin film supported by Cu(1 1 1). The two ceria phases grow on different areas of the substrate, what allows a reliable growth characterization of the CeO 2 (1 0 0) islands on Cu(1 1 1). Scanning tunneling microscopy measurements reveal CeO 2 (1 0 0) to grow in the form of highly dispersed three dimensional (3D) islands on a CeO 2 (1 0 0) interfacial layer. The CeO 2 (1 0 0) islands exhibit a 2 × 2 surface reconstruction. The presence of the surface reconstruction together with the highly dispersed growth of CeO 2 (1 0 0) islands corresponds to the requirement for compensation of the surface dipole moment on the CeO 2 (1 0 0). CeO 2 (1 0 0) islands are further characterized by reflection high energy electron diffraction yielding their epitaxial relations with respect to the Cu(1 1 1) substrate. The growth of well characterized CeO 2 (1 0 0) islands supported by Cu(1 1 1) represents a starting point for developing a novel template for structure-related reactivity studies of ceria based model catalysts.

Ce and Eu-doped LiSrAlF6 scintillators for neutron detectors

International Nuclear Information System (INIS)

Yanagida, Takayuki; Kawaguchi, Noriaki; Fujimoto, Yutaka; Yokota, Yuui; Yamazaki, Atsushi; Watanabe, Kenichi; Kamada, Kei; Yoshikawa, Akira; Chani, Valery

2011-01-01

Ce 1%, Eu 1%, and Eu 2%-doped LiSrAlF 6 (LiSAF) single crystals were grown by the micro-pulling-down method for thermal neutron applications. The crystals were transparent, 2.0 mm in diameter and 20–40 mm in length. Neither visible inclusions nor cracks were observed. Their transmittance spectra were measured. The strong absorption lines were observed at 200, 240, and 300 nm for Ce:LiSAF due to Ce 3+ 4f–5d transition. In Eu:LiSAF, 200 (4f–5d) and 300 (4f–4f) nm absorption lines were detected. The samples demonstrated strong emission peaks at 300 nm (Ce:LiSAF) and 370 nm (Eu:LiSAFs) when they were irradiated with 241 Am α-rays simulating the α-particles from the 6 Li(n, α) reaction. Thermal neutron responses were examined under 252 Cf irradiation. The absolute light yield of Ce, Eu 1%, and Eu 2% crystals were 3400, 18000, and 30000 ph/n, respectively. Main components of the scintillation decay time of Ce, Eu 1%, and Eu 2%-doped LiSAFs were 63, 1293, and 1205 ns.

Neutron scattering investigation of Ce based heavy fermion systems. From magnetism to unconventional phenomena

Energy Technology Data Exchange (ETDEWEB)

Geselbracht, Philipp

2016-12-05

In Ce based heavy fermion systems the hybridization of the 4f orbital of the Ce ion and the conduction band lead to unconventional phenomena such as quantum critical points or superconductivity. The aim of this thesis is to investigate and compare the magnetism on a microscopic scale within the heavy fermion families CeT{sub 2}X{sub 2} (X=Si,Ge) and CeTIn{sub 5}. To do so neutron scattering was used as the experimental method. For CeCu{sub 2}Ge{sub 2}, the antiferromagnetic order AF1 (vector τ=(0.285 0.285 0.544)) is well described as a spin density wave with reduced ordered moments in [1 anti 10] direction. The phase diagram with magnetic field applied along [1 anti 10] direction was investigated. Two new phases were observed: the elliptical helix phase AF2 with modified propagation vector vector τ=(0.34 0.27 0.55) and the C-phase with a yet unknown magnetic order. Above T{sub N}, in zero field, short range order was observed, hinting competition of AF1 and AF2. It is assumed that both structures are due to different nesting properties of the Fermi surface. The RKKY character of the electronic system leads to effective Lande factors in the AF1 (g{sup eff}=0.36) and AF2 (g{sup eff}=0.525) phases. From the zero field dispersion the strength of the next nearest neighbor RKKY interactions was extracted, yielding 2SJ{sub 1}=(-0.042±0.007) meV (basal plane) and 2SJ{sub 2}=(-0.18±0.01) meV (body diagonal). Comparing the RKKY interaction to CeCu{sub 2}Si{sub 2} and CeNi{sub 2}Ge{sub 2} reveals a strong enhancement of the interaction in the basal plane going from antiferromagnetism (CeCu{sub 2}Ge{sub 2}) to superconductivity (CeCu{sub 2}Si{sub 2}) and finally paramagnetism (CeNi{sub 2}Ge{sub 2}). This new finding appears to be an important puzzle piece for the understanding of the CeT{sub 2}X{sub 2} family as it suggests a dependence of the anisotropy of the RKKY interaction from the hybridization strength of the 4f orbital and the conduction band. The obtained phase

CeCo5 thin films with perpendicular anisotropy grown by molecular beam epitaxy

Science.gov (United States)

Sharma, S.; Hildebrandt, E.; Major, M.; Komissinskiy, P.; Radulov, I.; Alff, L.

2018-04-01

Buffer-free, highly textured (0 0 1) oriented CeCo5 thin films showing perpendicular magnetic anisotropy were synthesized on (0 0 1) Al2O3 substrates by molecular beam epitaxy. Ce exists in a mixture of Ce3+ and Ce4+ valence states as shown by X-ray photoelectron spectroscopy. The first anisotropy constant, K1, as measured by torque magnetometry was 0.82 MJ/m3 (8.2 ×106erg /cm3) . A maximum coercivity of 5.16 kOe with a negative temperature coefficient of -0.304%K-1 and a magnetization of 527.30 emu/cm3 was measured perpendicular to the film plane at 5 K. In addition, a large anisotropy of the magnetic moment of 15.5% was observed. These magnetic parameters make CeCo5 a potential candidate material for spintronic and magnetic recording applications.

The effect of some factors on Ms and SME in Ce-TZP ceramics

International Nuclear Information System (INIS)

Jiang, B.; Tu, J.; Hsu, T.Y.; Qi, X.; Zheng, X.; Zhong, J.

1992-01-01

As known to all, shape memory behaviour has been observed in a variety of metallic alloys. This phenomenon, however, is not only observed in that field but also in other materials recently, such as in polymers, intermetallic compounds and ceramics, especially in zirconia ceramics. Swain observed the shape recovery of a bent magnesia-partially-stabilized zirconia (Mg-PSZ) bar upon heating above a certain temperature. The maximum deflection which was nearly completely recovered on heating is about 300 μm. Chen et al., investigated the pseudoelasticity and shape memory effect (SME) in ceria-stabilized tetragonal zirconia polycrystals (Ce-TZP) containing 12 mol% CeO 2 . Wang et al., also observed the SME in Ce-TZP containing 10 mol% CeO 2 . In this paper, the authors would like to introduce some of results conducted recently in our group on SME in Ce-TZP ceramics

Ultraviolet-visible optical isolators based on CeF3 Faraday rotator

International Nuclear Information System (INIS)

Víllora, Encarnación G.; Shimamura, Kiyoshi; Plaza, Gustavo R.

2015-01-01

The first ultraviolet (UV) and visible optical isolators based on CeF 3 are demonstrated. CeF 3 possesses unique properties as Faraday rotator for the UV-visible wavelength region: a wide transparency range (wavelength of >300 nm) and an outstanding Verdet constant. In contrast, currently used terbium-gallium garnets and magneto-optical glasses possess a low transparency in the visible and a small Verdet constant in the UV, respectively. The optical isolator prototypes consist of a CeF 3 rod, a single ring magnet, and a couple of beam splitters. The ring magnets have been designed to guarantee a homogeneous magnetic field; for it, numerical simulations have been carried out. The two prototypes are very compact and operate in the UV at 355 and in the visible at 405 nm, respectively. The performance of these devices indicates the high potential of CeF 3 as a new UV-visible Faraday rotator, specially for shorter wavelengths where at present there are no optical isolators available

Supraconductivity of TR-Ru3Si2 compounds (TR = La, Ce)

International Nuclear Information System (INIS)

Godart, C.; Gupta, L.C.; Parks, R.D.; Rauschwalbe, U.; Alheim, U.; Gottwick, U.; Lieke, W.; Steglich, F.

1984-01-01

A new family of superconducting ternary silicides MRu 3 Si 2 with M = La (Tsub(s) approximately 7 K), Y and Th was discovered by Barz and Vandenberg. Same compounds with M from Nd to Tm are magnetic and not superconductors. We studied superconductivity in the solid solution Cesub(1-x)Lasub(x)Ru 3 Si 2 of hexagonal structure from x = 0 to 1. CeRu 3 Si 2 is type II superconductor (Tsub(s) approximately 1 K), like LaRu 3 Si 2 , and is mixed valent (M.V.). Spin fluctuations temperature (Tsub(sf) approximately 440 K) is between these of non superconducting M.V. like CeSn 3 (Tsub(sf) approximately 270) and these of superconducting M.V. like CeRu 2 (Tsub(sf) approximately 770 K). Cesub(1-x)Lasub(x)Ru 3 Si 2 is the first M.V. system of Ce which is superconductor from x = 0 to 1 [fr

LaBr3:Ce crystal: The latest advance for scintillation cameras

International Nuclear Information System (INIS)

Pani, R.; Pellegrini, R.; Cinti, M.N.; Bennati, P.; Betti, M.; Vittorini, F.; Mattioli, M.; Trotta, G.; Orsolini Cencelli, V.; Scafe, R.; Montani, L.; Navarria, F.; Bollini, D.; Baldazzi, G.; Moschini, G.; Rossi, P.; De Notaristefani, F.

2007-01-01

Recent availability of LaBr 3 :Ce crystal is attracting researchers for the development of new advanced SPECT e PET systems. The crystal shows excellent energy resolution values good radiation absorption properties and speed. At present, LaBr 3 :Ce crystal is available with continuous shape covering 5x5 cm 2 area with a thickness up to 1 in. With the aim of analysing the imaging performances of LaBr 3 :Ce for Single Photon Emission Tomography (SPET), we tested three continuous crystals with the same detection area of 5x5 cm 2 and various thicknesses ranging between 4 and 10 mm. Three small scintillation cameras were assembled by coupling LaBr3:Ce crystal to Hamamatsu H8500 Flat panel PMT. The results show very good imaging performances for single photon emission application with superior energy and spatial resolution up 7.5% and 0.9 mm, respectively, and a detection efficiency up to 95% at 140 keV photon energy

Study on time characteristics of fast time response inorganic scintillator CeF3

International Nuclear Information System (INIS)

Hu Mengchun; Zhou Dianzhong; Guo Cun; Ye Wenying

2003-01-01

The cerium fluoride (CeF 3 ) is a kind of new fast time response inorganic scintillator. The physical characteristics of CeF 3 are well suitable for detection of domestic pulse γ-rays. The time response of detector composed by phototube with CeF 3 are measured by use of the pulse radiation source with rise time about 0.8 ns, and FWHM time 1.5-2.2 ns. Experiment results show that the rise time is less than 2 ns, FWHM time is about 10 ns, fall time is about 60 ns, average decay time constant is 20-30 ns, respectively for CeF 3

Cooperative effects in CeCu2Si2

International Nuclear Information System (INIS)

Lang, M.; Modler, R.; Ahlheim, U.; Helfrich, R.; Reinders, P.H.P.; Steglich, F.; Assmus, W.; Sun, W.; Bruls, G.; Weber, D.; Luethi, B.

1991-01-01

Heavy-fermion superconductivity and other cooperative effects have been explored by thermal expansion, specific heat and ultrasound measurements on CeCu 2 Si 2 single crystals. Crystals annealed under Cu atmosphere show sharp superconducting transitions at Tc max =0.63 K. At the same temperature the ''as grown'', i.e., non-bulk-superconducting, crystals reveal a pronounced phase-transition anomaly, presumably of structural origin. This new transition is associated with an expansion of the volume upon cooling and gives rise to magnetic correlations. Our results indicate a complex interplay between lattice instability, magnetic phenomena and superconductivity in CeCu 2 Si 2 . (orig.)

Catalytic hydrolysis of COS over CeO_2 (110) surface: A density functional theory study

International Nuclear Information System (INIS)

Song, Xin; Ning, Ping; Wang, Chi; Li, Kai; Tang, Lihong; Sun, Xin

2017-01-01

Graphical abstract: CeO_2 decreases the maximum energy barrier by 76.15 kcal/mol. H_2O plays a role as a bridge in the process of joint adsorption. Catalytic effect of CeO_2 in the hydrolysis of COS is mainly reflected on the C−O channel. - Highlights: • H_2O is easier adsorbed on the CeO_2 (110) surface than COS. • When COS and H_2O jointly adsorb on the CeO_2 (110) surface, the H_2O molecule plays a role as a bridge. • Ce−O−H bond can enhance the adsorption effect. • Catalytic effect of CeO_2 in the hydrolysis of COS is mainly reflected on the C−O channel. - Abstract: Density functional theory (DFT) calculations were performed to investigate the reaction pathways for catalytic hydrolysis of COS over CeO_2 (110) surface using Dmol"3 model. The thermodynamic stability analysis for the suggested routes of COS hydrolysis to CO_2 and H_2S was evaluated. The absolute values of adsorption energy of H_2O-CeO_2 are higher than that of COS-CeO_2. Meanwhile, the adsorption energy and geometries show that H_2O is easier adsorbed on the surface of CeO_2 (110) than COS. H_2O plays a role as a bridge in the process of joint adsorption. H_2O forms more Ce−O−H groups on the CeO_2 (110) surface. CeO_2 decreases the maximum energy barrier by 76.15 kcal/mol. The migration of H from H_2O to COS is the key for the hydrolysis reaction. C−O channel is easier to occur than C−S channel. Experimental result shows that adding of CeO_2 can increase COS removal rate and prolong the 100% COS removal rate from 180 min to 210 min. The difference between Fe_2O_3 and CeO_2 for the hydrolysis of COS is characterized in the atomic charge transfer and the formation of H−O bond and H−S bond. The transfer effect of H in H_2O to S in COS over CeO_2 decreases the energy barriers of hydrolysis reaction, and enhances the reaction activity of COS hydrolysis.

Phase evolution and photoluminescence enhancement of CePO4 nanowires from a low phosphate concentration system

International Nuclear Information System (INIS)

Xu Pengfei; Yu Ranbo; Zong Lingbo; Wang Jiali; Wang Dan; Deng Jinxia; Chen Jun; Xing Xianran

2013-01-01

Uniform CePO 4 nanowires have been successfully synthesized in a low phosphate concentration system through a single-step hydrothermal process. The low phosphate concentration might decrease the surface PO 4 3− adsorption of the as-synthesized CePO 4 nanowires efficiently and benefit their photoluminescence. The CePO 4 nanowires were identified to go through phase evolution from pure monoclinic to mixed hexagonal and monoclinic phase by only increasing the initial molar ratio of cerium and phosphate source (denoted as Ce/P). Interestingly, the strongest photoluminescence was observed in the CePO 4 nanowires synthesized with the initial Ce/P of 4:1, which proved to be the critical phase evolution point between the hexagonal and monoclinic CePO 4 . Therefore, the strong photoluminescence could be explained by the existence of the structure-sensitive energy level in the CePO 4 . This kind of photoluminescence enhancement would be a meaningful reference for design of other photoluminescent materials, in which the photoluminescent emission might be related to the structure-sensitive energy level. Additionally, the growth processes of CePO 4 nanowires based on related well-designed experiments were proposed.

Effect of Ce addition on the mechanical and electrochemical properties of a lithium battery shell alloy

International Nuclear Information System (INIS)

Zhang, Junchao; Ding, Dongyan; Xu, Xinglong; Gao, Yongjin; Chen, Guozhen; Chen, Weigao; You, Xiaohua; Huang, Yuanwei; Tang, Jinsong

2014-01-01

Highlights: • Fabrication of Ce-free and Ce-containing Al–Cu–Mn–Fe–Mg alloy. • TEM, tensile and electrochemical characterization of the alloys. • Ce element greatly affects the precipitation of the alloy. • Ce element had great impact on the tensile strength and corrosion potential of the alloys. - Abstract: Due to severe application environment lithium battery shell of new-energy automotives requires increasing demands for using high performance aluminum alloys. In the present work, effect of Ce addition on the microstructure, tensile and electrochemical properties of an Al–Cu–Mn–Mg–Fe alloy were investigated through using X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), tensile tests and electrochemical tests. The experimental results indicated that the addition of Ce element could promote the precipitation of second phases. With addition of 0.36% Ce, high melting point Al 8 Cu 4 Ce phase and many Al 20 Cu 2 Mn 3 particles could be found. In addition, the precipitation of conventionally dominant phase of Al 2 Cu could be suppressed in alloy. The Ce addition was found to result in enhanced tensile strength and improved corrosion resistance

Effect of Ce addition on the mechanical and electrochemical properties of a lithium battery shell alloy