WorldWideScience

Sample records for damage concepts approaches

  1. Ten years of application of the new concept of non-pecuniary damage

    Directory of Open Access Journals (Sweden)

    Maja Bukovac Puvača

    2015-01-01

    Full Text Available The author analyses the question whether and how the new concept of non-pecuniary damage in the Law on Obligations impacted on case-law in Croatia. Respectively, the consequences of this new concept in respect of a private protection of rights on personality are searched for. The special attention is devoted to the basic problems in defining non-pecuniary damage as well as the problems in the recognition of the right to monetary compensation in personal injuries cases in comparative law. The comparative analysis showed that due to a restrictive approach of the legislators, the key role in relation to the above issues had case-law and legal theory. There was a lot of criticism referred to the old legal definition of non-pecuniary damage within Croatian legal theory, but judicial practice had successfully overcame those imperfections. The comparison of the older case-law with the new one, ensued from the application of the new, objective concept of non-pecuniary damage, revealed that the new regulation, although the legislator set a good framework for it, has not significantly affected the compensations of such damage in practice

  2. Proof-of-concept experimental study of damage detection of concrete piles using embedded piezoceramic transducers

    International Nuclear Information System (INIS)

    Wang, R L; Gu, H; Song, G; Mo, Y L

    2013-01-01

    This paper presents a proof-of-concept experimental study of an innovative active-sensing approach for damage detection of concrete piles by using embedded piezoceramic transducers. In the proposed active-sensing approach, one piezoceramic transducer is used as an actuator to generate a stress wave to propagate through the concrete pile and the other distributed piezoceramic transducers are used as sensors to detect the wave response. Cracks or damage inside the concrete structure act as stress relief in the wave propagation path. The amplitude of the wave and the transmission energy will decrease due to the existence of cracks or damage. Experiments were performed on two bored piles instrumented with embedded piezoceramic transducers. The experimental results demonstrate the effectiveness of the proposed approach for pile damage detection. (fast track communication)

  3. Cointegration approach for temperature effect compensation in Lamb-wave-based damage detection

    International Nuclear Information System (INIS)

    Dao, Phong B; Staszewski, Wieslaw J

    2013-01-01

    Lamb waves are often used in smart structures with integrated, low-profile piezoceramic transducers for damage detection. However, it is well known that the method is prone to contamination from a variety of interference sources including environmental and operational conditions. The paper demonstrates how to remove the undesired temperature effect from Lamb wave data. The method is based on the concept of cointegration that is partially built on the analysis of the non-stationary behaviour of time series. Instead of directly using Lamb wave responses for damage detection, two approaches are proposed: (i) analysis of cointegrating residuals obtained from the cointegration process of Lamb wave responses, (ii) analysis of stationary characteristics of Lamb wave responses before and after cointegration. The method is tested on undamaged and damaged aluminium plates exposed to temperature variations. The experimental results show that the method can: isolate damage-sensitive features from temperature variations, detect the existence of damage and classify its severity. (paper)

  4. Use of Time- and Frequency-Domain Approaches for Damage Detection in Civil Engineering Structures

    Directory of Open Access Journals (Sweden)

    V. H. Nguyen

    2014-01-01

    Full Text Available The aim of this paper is to apply both time- and frequency-domain-based approaches on real-life civil engineering structures and to assess their capability for damage detection. The methodology is based on Principal Component Analysis of the Hankel matrix built from output-only measurements and of Frequency Response Functions. Damage detection is performed using the concept of subspace angles between a current (possibly damaged state and a reference (undamaged state. The first structure is the Champangshiehl Bridge located in Luxembourg. Several damage levels were intentionally created by cutting a growing number of prestressed tendons and vibration data were acquired by the University of Luxembourg for each damaged state. The second example consists in reinforced and prestressed concrete panels. Successive damages were introduced in the panels by loading heavy weights and by cutting steel wires. The illustrations show different consequences in damage identification by the considered techniques.

  5. Concepts for improving the damage tolerance of composite compression panels. [aircraft structures

    Science.gov (United States)

    Rhodes, M. D.; Williams, J. G.

    1984-01-01

    The residual strength of specimens with damage and the sensitivity to damage while subjected to an applied inplane compression load were determined for flatplate specimens and blade-stiffened panels. The results suggest that matrix materials that fail by delamination have the lowest damage tolerance capability. Alternate matrix materials or laminates which are transversely reinforced suppress the delamination mode of failure and change the failure mode to transverse shear crippling which occurs at a higher strain value. Several damage-tolerant blade-stiffened panel design concepts are evaluated. Structural efficiency studies conducted show only small mass penalties may result from incorporating these damage-tolerant features in panel design. The implication of test results on the design of aircraft structures was examined with respect to FAR requirements.

  6. Continuum damage mechanics based approach to the fatigue life prediction of cast aluminium alloy with considering the effect of porosity

    Directory of Open Access Journals (Sweden)

    Wang Xiaojia

    2018-01-01

    Full Text Available A damage mechanics based approach is applied for the study of fatigue behaviour of high pressure die cast ADC12 aluminium alloy. A damage coupled elastoplastic constitutive model is presented according to the concept of effective stress and the hypothesis of strain equivalence. An elastic fatigue damage model taking into account the pore-induced stress concentration is developed to investigate fatigue damage evolution of the specimens subjected to cyclic loading. The predicted lives for the specimens with different sizes of pores are consistent with the experimental data. The pore-induced fatigue damage and the variation of fatigue life along with the size of pores are also investigated.

  7. Continuum Damage Mechanics A Continuum Mechanics Approach to the Analysis of Damage and Fracture

    CERN Document Server

    Murakami, Sumio

    2012-01-01

    Recent developments in engineering and technology have brought about serious and enlarged demands for reliability, safety and economy in wide range of fields such as aeronautics, nuclear engineering, civil and structural engineering, automotive and production industry.  This, in turn, has caused more interest in continuum damage mechanics and its engineering applications.   This book aims to give a concise overview of the current state of damage mechanics, and then to show the fascinating possibility of this promising branch of mechanics, and to provide researchers, engineers and graduate students with an intelligible and self-contained textbook.   The book consists of two parts and an appendix.  Part I  is concerned with the foundation of continuum damage mechanics.  Basic concepts of material damage and the mechanical representation of damage state of various kinds are described in Chapters 1 and 2.  In Chapters 3-5, irreversible thermodynamics, thermodynamic constitutive theory and its application ...

  8. Multiscale approach to the physics of radiation damage with ions

    International Nuclear Information System (INIS)

    Surdutovich, E.; Solov'yov, A.

    2014-01-01

    The multiscale approach to the assessment of bio-damage resulting upon irradiation of biological media with ions is reviewed, explained and compared to other approaches. The processes of ion propagation in the medium concurrent with ionization and excitation of molecules, transport of secondary products, dynamics of the medium, and biological damage take place on a number of different temporal, spatial and energy scales. The multiscale approach, a physical phenomenon-based analysis of the scenario that leads to radiation damage, has been designed to consider all relevant effects on a variety of scales and develop an approach to the quantitative assessment of biological damage as a result of irradiation with ions. Presently, physical and chemical effects are included in the scenario while the biological effects such as DNA repair are only mentioned. This paper explains the scenario of radiation damage with ions, overviews its major parts, and applies the multiscale approach to different experimental conditions. On the basis of this experience, the recipe for application of the multiscale approach is formulated. The recipe leads to the calculation of relative biological effectiveness. (authors)

  9. Selecting concepts for a concept-based curriculum: application of a benchmark approach.

    Science.gov (United States)

    Giddens, Jean Foret; Wright, Mary; Gray, Irene

    2012-09-01

    In response to a transformational movement in nursing education, faculty across the country are considering changes to curricula and approaches to teaching. As a result, an emerging trend in many nursing programs is the adoption of a concept-based curriculum. As part of the curriculum development process, the selection of concepts, competencies, and exemplars on which to build courses and base content is needed. This article presents a benchmark approach used to validate and finalize concept selection among educators developing a concept-based curriculum for a statewide nursing consortium. These findings are intended to inform other nurse educators who are currently involved with or are considering this curriculum approach. Copyright 2012, SLACK Incorporated.

  10. Probabilistic Damage Characterization Using the Computationally-Efficient Bayesian Approach

    Science.gov (United States)

    Warner, James E.; Hochhalter, Jacob D.

    2016-01-01

    This work presents a computationally-ecient approach for damage determination that quanti es uncertainty in the provided diagnosis. Given strain sensor data that are polluted with measurement errors, Bayesian inference is used to estimate the location, size, and orientation of damage. This approach uses Bayes' Theorem to combine any prior knowledge an analyst may have about the nature of the damage with information provided implicitly by the strain sensor data to form a posterior probability distribution over possible damage states. The unknown damage parameters are then estimated based on samples drawn numerically from this distribution using a Markov Chain Monte Carlo (MCMC) sampling algorithm. Several modi cations are made to the traditional Bayesian inference approach to provide signi cant computational speedup. First, an ecient surrogate model is constructed using sparse grid interpolation to replace a costly nite element model that must otherwise be evaluated for each sample drawn with MCMC. Next, the standard Bayesian posterior distribution is modi ed using a weighted likelihood formulation, which is shown to improve the convergence of the sampling process. Finally, a robust MCMC algorithm, Delayed Rejection Adaptive Metropolis (DRAM), is adopted to sample the probability distribution more eciently. Numerical examples demonstrate that the proposed framework e ectively provides damage estimates with uncertainty quanti cation and can yield orders of magnitude speedup over standard Bayesian approaches.

  11. Modelling multi-hazard hurricane damages on an urbanized coast with a Bayesian Network approach

    Science.gov (United States)

    van Verseveld, H.C.W.; Van Dongeren, A. R.; Plant, Nathaniel G.; Jäger, W.S.; den Heijer, C.

    2015-01-01

    Hurricane flood impacts to residential buildings in coastal zones are caused by a number of hazards, such as inundation, overflow currents, erosion, and wave attack. However, traditional hurricane damage models typically make use of stage-damage functions, where the stage is related to flooding depth only. Moreover, these models are deterministic and do not consider the large amount of uncertainty associated with both the processes themselves and with the predictions. This uncertainty becomes increasingly important when multiple hazards (flooding, wave attack, erosion, etc.) are considered simultaneously. This paper focusses on establishing relationships between observed damage and multiple hazard indicators in order to make better probabilistic predictions. The concept consists of (1) determining Local Hazard Indicators (LHIs) from a hindcasted storm with use of a nearshore morphodynamic model, XBeach, and (2) coupling these LHIs and building characteristics to the observed damages. We chose a Bayesian Network approach in order to make this coupling and used the LHIs ‘Inundation depth’, ‘Flow velocity’, ‘Wave attack’, and ‘Scour depth’ to represent flooding, current, wave impacts, and erosion related hazards.The coupled hazard model was tested against four thousand damage observations from a case site at the Rockaway Peninsula, NY, that was impacted by Hurricane Sandy in late October, 2012. The model was able to accurately distinguish ‘Minor damage’ from all other outcomes 95% of the time and could distinguish areas that were affected by the storm, but not severely damaged, 68% of the time. For the most heavily damaged buildings (‘Major Damage’ and ‘Destroyed’), projections of the expected damage underestimated the observed damage. The model demonstrated that including multiple hazards doubled the prediction skill, with Log-Likelihood Ratio test (a measure of improved accuracy and reduction in uncertainty) scores between 0.02 and 0

  12. Recent developments of continuous damage approaches for the analysis of material behavior under fatigue-creep loading

    International Nuclear Information System (INIS)

    Bui-Quoc, T.

    1982-01-01

    A review is presented with an analysis of some recent methods proposed in the literature for predicting failure of materials under a cumulative damage effect due either to fatigue, to creep, or to fatigue-creep combinations. This review is focused on the continuous damage concepts because of their possibilities of application for a wide range of testing conditions. A discussion of the potential of each damage concept is made by examining the correlation between the resulting expressions and available experimental data. The paper also points out particularities encountered in the interpretation of some of the concepts reviewed

  13. Structural Health Management of Damaged Aircraft Structures Using the Digital Twin Concept

    Science.gov (United States)

    Seshadri, Banavara R.; Krishnamurthy, Thiagarajan

    2017-01-01

    The development of multidisciplinary integrated Structural Health Management (SHM) tools will enable accurate detection, and prognosis of damaged aircraft under normal and adverse conditions during flight. As part of the digital twin concept, methodologies are developed by using integrated multiphysics models, sensor information and input data from an in-service vehicle to mirror and predict the life of its corresponding physical twin. SHM tools are necessary for both damage diagnostics and prognostics for continued safe operation of damaged aircraft structures. The adverse conditions include loss of control caused by environmental factors, actuator and sensor faults or failures, and structural damage conditions. A major concern in these structures is the growth of undetected damage/cracks due to fatigue and low velocity foreign object impact that can reach a critical size during flight, resulting in loss of control of the aircraft. To avoid unstable, catastrophic propagation of damage during a flight, load levels must be maintained that are below a reduced load-carrying capacity for continued safe operation of an aircraft. Hence, a capability is needed for accurate real-time predictions of damage size and safe load carrying capacity for structures with complex damage configurations. In the present work, a procedure is developed that uses guided wave responses to interrogate damage. As the guided wave interacts with damage, the signal attenuates in some directions and reflects in others. This results in a difference in signal magnitude as well as phase shifts between signal responses for damaged and undamaged structures. Accurate estimation of damage size, location, and orientation is made by evaluating the cumulative signal responses at various pre-selected sensor locations using a genetic algorithm (GA) based optimization procedure. The damage size, location, and orientation is obtained by minimizing the difference between the reference responses and the

  14. Smeared crack modelling approach for corrosion-induced concrete damage

    DEFF Research Database (Denmark)

    Thybo, Anna Emilie Anusha; Michel, Alexander; Stang, Henrik

    2017-01-01

    In this paper a smeared crack modelling approach is used to simulate corrosion-induced damage in reinforced concrete. The presented modelling approach utilizes a thermal analogy to mimic the expansive nature of solid corrosion products, while taking into account the penetration of corrosion...... products into the surrounding concrete, non-uniform precipitation of corrosion products, and creep. To demonstrate the applicability of the presented modelling approach, numerical predictions in terms of corrosion-induced deformations as well as formation and propagation of micro- and macrocracks were......-induced damage phenomena in reinforced concrete. Moreover, good agreements were also found between experimental and numerical data for corrosion-induced deformations along the circumference of the reinforcement....

  15. MILDLY-DAMAGED FOREST AREAS IN BOREAL FORESTS OF THE WORLD. THE ORIGIN, DEVELOPMENT, IMPOTANCE AND PROBABLE FUTURE OF THE CONCEPT OF MILDLY-DAMAGED FOREST AREAS WITH REGARD TO BOREAL FORESTS

    Directory of Open Access Journals (Sweden)

    I.V. Zhuravleva

    2016-03-01

    Full Text Available The most important environmental goals at the global level, relating to forests, are conservation of biological diversity in the natural environment of its habitat and preservation of the environmental role (especially regarding the climate of forests. Major forest areas, not fragmented by infrastructure and preserving the diversity of relationships between landscape elements, are of crucial importance for solution of both these problems. Since many decisions, concerning conservation and management, are taken at inter-regional and inter-state levels or within the framework of various international processes, it is important to have clear and uniform criteria for identification of such areas. The article deals with occurrence, development and current state of the most common concepts of allocation thereof – the concept of mildly-damaged forest areas, based on the use of remote sensing data, especially images from Landsat satellites. The article substantiates a necessity of further development and update of the concept of intact forest landscapes: unification of approaches to their identification near northern boundaries of forests, adjustment of approaches to registering impacts of forest fires in the context of global climate change and land-use practices, adaption to new public data of remote sensing of the Earth.

  16. Multiscale approach to the physics of radiation damage with ions

    Energy Technology Data Exchange (ETDEWEB)

    Surdutovich, Eugene [Physics Department, Oakland University, 2200 N. Squirrel Rd., Rochester MI 48309 (United States); Solov' yov, Andrey V. [Frankfurt Institute for Advanced Studies, Goethe University, Ruth-Moufang-Str. 1, Frankfurt am Main 60438 (Germany)

    2013-04-19

    We review a multiscale approach to the physics of ion-beam cancer therapy, an approach suggested in order to understand the interplay of a large number of phenomena involved in radiation damage scenario occurring on a range of temporal, spatial, and energy scales. We briefly overview its history and present the current stage of its development. The differences of the multiscale approach from other methods of understanding and assessment of radiation damage are discussed as well as its relationship to other branches of physics, chemistry and biology.

  17. A data fusion based approach for damage detection in linear systems

    Directory of Open Access Journals (Sweden)

    Ernesto Grande

    2014-07-01

    Full Text Available The aim of the present paper is to propose innovative approaches able to improve the capability of classical damage indicators in detecting the damage position in linear systems. In particular, starting from classical indicators based on the change of the flexibility matrix and on the change of the modal strain energy, the proposed approaches consider two data fusion procedures both based on the Dempster-Shafer theory. Numerical applications are reported in the paper in order to assess the reliability of the proposed approaches considering different damage scenarios, different sets of modes of vibration and the presence of errors affecting the accounted modes of vibrations.

  18. Towards Technological Approaches for Concept Maps Mining from Text

    Directory of Open Access Journals (Sweden)

    Camila Zacche Aguiar

    2018-04-01

    Full Text Available Concept maps are resources for the representation and construction of knowledge. They allow showing, through concepts and relationships, how knowledge about a subject is organized. Technological advances have boosted the development of approaches for the automatic construction of a concept map, to facilitate and provide the benefits of that resource more broadly. Due to the need to better identify and analyze the functionalities and characteristics of those approaches, we conducted a detailed study on technological approaches for automatic construction of concept maps published between 1994 and 2016 in the IEEE Xplore, ACM and Elsevier Science Direct data bases. From this study, we elaborate a categorization defined on two perspectives, Data Source and Graphic Representation, and fourteen categories. That study collected 30 relevant articles, which were applied to the proposed categorization to identify the main features and limitations of each approach. A detailed view on these approaches, their characteristics and techniques are presented enabling a quantitative analysis. In addition, the categorization has given us objective conditions to establish new specification requirements for a new technological approach aiming at concept maps mining from texts.

  19. The Comprehensive Approach Concept in Multinational Operations

    Directory of Open Access Journals (Sweden)

    Neag Mihai-Marcel

    2017-12-01

    Full Text Available The planning of operations is regulated by documents covering the participation of forces in military actions in a national and multinational context. The process of planning the operations has been adapted to conceptual planning progress. The concept of allied effect-based operations, which was an alternative to old national concepts, has undergone transformations, so the process of planning operations at allied level is currently based on the concept of a comprehensive approach, which is a strategic concept, do not give up effects. The term action-based operations has been replaced by the term “thought-based thinking” and belongs to the general concept of comprehensive approach. If the planning process meant the effects, so the main planning objectives were the effects, then the planning was based on concrete objectives, the effects being maintained for the economy of effort and maximizing efficiency, the main purpose of the effects being the evaluation of the operations. From this point of view, we consider that the concept has not been abandoned, what has changed, it was just the working method, the subject being still topical.

  20. Multi-scale approach to radiation damage induced by ion beams: complex DNA damage and effects of thermal spikes

    International Nuclear Information System (INIS)

    Surdutovich, E.; Yakubovich, A.V.; Solov'yov, A.V.; Surdutovich, E.; Yakubovich, A.V.; Solov'yov, A.V.

    2010-01-01

    We present the latest advances of the multi-scale approach to radiation damage caused by irradiation of a tissue with energetic ions and report the calculations of complex DNA damage and the effects of thermal spikes on biomolecules. The multi-scale approach aims to quantify the most important physical, chemical, and biological phenomena taking place during and following irradiation with ions and provide a better means for clinically-necessary calculations with adequate accuracy. We suggest a way of quantifying the complex clustered damage, one of the most important features of the radiation damage caused by ions. This quantification allows the studying of how the clusterization of DNA lesions affects the lethality of damage. We discuss the first results of molecular dynamics simulations of ubiquitin in the environment of thermal spikes, predicted to occur in tissue for a short time after an ion's passage in the vicinity of the ions' tracks. (authors)

  1. A Bayesian concept learning approach to crowdsourcing

    DEFF Research Database (Denmark)

    Viappiani, P.; Zilles, S.; Hamilton, H.J.

    2011-01-01

    techniques, inference methods, and query selection strategies to assist a user charged with choosing a configuration that satisfies some (partially known) concept. Our model is able to simultaneously learn the concept definition and the types of the experts. We evaluate our model with simulations, showing......We develop a Bayesian approach to concept learning for crowdsourcing applications. A probabilistic belief over possible concept definitions is maintained and updated according to (noisy) observations from experts, whose behaviors are modeled using discrete types. We propose recommendation...

  2. Novel Concepts for Damage-Resistant Alloys in Next Generation Nuclear Power Systems

    Energy Technology Data Exchange (ETDEWEB)

    Stephen M. Bruemmer; Peter L. Andersen; Gary Was

    2002-12-27

    The discovery of a damage-resistant alloy based on Hf solute additions to a low-carbon 316SS is the highlight of the Phase II research. This damage resistance is supported by characterization of radiation-induced microstructures and microchemistries along with measurements of environmental cracking. The addition of Hf to a low-carbon 316SS reduced the detrimental impact of radiation by changing the distribution of Hf. Pt additions reduced the impact of radiation on grain boundary segregation but did not alter its effect on microstructural damage development or cracking. Because cracking susceptibility is associated with several material characteristics, separate effect experiments exploring strength effects using non-irradiated stainless steels were conducted. These crack growth tests suggest that irradiation strength by itself can promote environmental cracking. The second concept for developing damage resistant alloys is the use of metastable precipitates to stabilize the microstructure during irradiation. Three alloys have been tailored for evaluation of precipitate stability influences on damage evolution. The first alloy is a Ni-base alloy (alloy 718) that has been characterized at low neutron irradiation doses but has not been characterized at high irradiation doses. The other two alloys are Fe-base alloys (PH 17-7 and PH 17-4) that have similar precipitate structures as alloy 718 but is more practical in nuclear structures because of the lower Ni content and hence lesser transmutation to He.

  3. Reducing environmental damages caused by transportation: towards an heterodox approach

    International Nuclear Information System (INIS)

    Marletto, Gerardo

    2006-01-01

    According to orthodox economics, monetary incentives are the best way to reduce environmental damages caused by transportation. This approach is consistent with the consideration of environmental damages as a market failure and with the use of pigouvian taxes to re-establish market equilibrium. Using heterodox economics both the theoretical and the policy approach will change radically. Indeed, market is just one of the structural components of the existing transport system; others being: institutions, technologies, values. Then, a shift in policy approaches is needed: from the orthodox efficient allocation of existing resources, to the heterodox promotion of new development patterns, needed to alter the given structural situation. Consistently with this paradigmatic shift, environmental damages caused by transportation can be reduced only by making the transition to a new transport system viable. Moreover, an heterodox approach to the reduction of environmental damages caused by transportation gives rise to a sound revision of policy tools; among these must be considered: selective industrial policies to foster the ecological reconversion of transport supply (instead of a non-discriminatory support to ecological innovations); participatory decision procedures to evaluate and select transport policies (instead of neutral technical tools - such as Cba or Eia); information campaigns based on ethical considerations (instead of economic incentives to transport demand); attribution of the status of commons to environmental resources, in order to protect them from the free riding of transport activities (instead of the attribution to them of private property rights). This essay is composed of four parts. In the first one, some data on environmental damages caused by transportation in Italy are shown. In the second one, orthodox and heterodox paradigms of public interventions in the economy are compared, with a specific attention to environmental applications. In the

  4. A broader classification of damage zones

    Science.gov (United States)

    Peacock, D. C. P.; Dimmen, V.; Rotevatn, A.; Sanderson, D. J.

    2017-09-01

    Damage zones have previously been classified in terms of their positions at fault tips, walls or areas of linkage, with the latter being described in terms of sub-parallel and synchronously active faults. We broaden the idea of linkage to include structures around the intersections of non-parallel and/or non-synchronous faults. These interaction damage zones can be divided into approaching damage zones, where the faults kinematically interact but are not physically connected, and intersection damage zones, where the faults either abut or cross-cut. The damage zone concept is applied to other settings in which strain or displacement variations are taken up by a range of structures, such as at fault bends. It is recommended that a prefix can be added to a wide range of damage zones, to describe the locations in which they formed, e.g., approaching, intersection and fault bend damage zone. Such interpretations are commonly based on limited knowledge of the 3D geometries of the structures, such as from exposure surfaces, and there may be spatial variations. For example, approaching faults and related damage seen in outcrop may be intersecting elsewhere on the fault planes. Dilation in intersection damage zones can represent narrow and localised channels for fluid flow, and such dilation can be influenced by post-faulting stress patterns.

  5. APPROACH TO THE ORGANIZATIONAL CULTURE CONCEPT

    Directory of Open Access Journals (Sweden)

    CLAUDIA MARÍA GARCÍA ÁLVAREZ

    2006-01-01

    Full Text Available In order to make evident the instrumental nature of the concept of culture applied to organization, thisessay develops a comprehension of the concept of organizational culture. This effort is important becausethe concept of organization itself implies a construction of a social order from meanings becominghegemonic in the framework of a particular context. Organizational Psychology, even with its neutralitypretension, is not innocent about the instrumental role that social sciences have had in the organizationalarena; however this essay introduces alternatives from critical approaches that allow ways of comprehensionand why not, intervention from perspectives explicitly political.

  6. Individual aircraft life monitoring: An engineering approach for fatigue damage evaluation

    Directory of Open Access Journals (Sweden)

    Rui JIAO

    2018-04-01

    Full Text Available Individual aircraft life monitoring is required to ensure safety and economy of aircraft structure, and fatigue damage evaluation based on collected operational data of aircraft is an integral part of it. To improve the accuracy and facilitate the application, this paper proposes an engineering approach to evaluate fatigue damage and predict fatigue life for critical structures in fatigue monitoring. In this approach, traditional nominal stress method is applied to back calculate the S-N curve parameters of the realistic structure details based on full-scale fatigue test data. Then the S-N curve and Miner’s rule are adopted in damage estimation and fatigue life analysis for critical locations under individual load spectra. The relationship between relative small crack length and fatigue life can also be predicted with this approach. Specimens of 7B04-T74 aluminum alloy and TA15M titanium alloy are fatigue tested under two types of load spectra, and there is a good agreement between the experimental results and analysis results. Furthermore, the issue concerning scatter factor in individual aircraft damage estimation is also discussed. Keywords: Fatigue damage, Fatigue monitoring, Fatigue test, Scatter factor, S-N curve

  7. Towards Technological Approaches for Concept Maps Mining from Text

    OpenAIRE

    Camila Zacche Aguiar; Davidson Cury; Amal Zouaq

    2018-01-01

    Concept maps are resources for the representation and construction of knowledge. They allow showing, through concepts and relationships, how knowledge about a subject is organized. Technological advances have boosted the development of approaches for the automatic construction of a concept map, to facilitate and provide the benefits of that resource more broadly. Due to the need to better identify and analyze the functionalities and characteristics of those approaches, we conducted a detailed...

  8. Three job stress models/concepts and oxidative DNA damage in a sample of workers in Japan.

    Science.gov (United States)

    Inoue, Akiomi; Kawakami, Norito; Ishizaki, Masao; Tabata, Masaji; Tsuchiya, Masao; Akiyama, Miki; Kitazume, Akiko; Kuroda, Mitsuyo; Shimazu, Akihito

    2009-04-01

    Three job stress models/concepts (the job demands-control [DC] model, the effort-reward imbalance [ERI] model, and organizational justice) have been linked to coronary heart disease (CHD) at work. In recent years, oxidative DNA damage has been identified as a new risk factor for CHD. However, evidence for the association between these job stressors and oxidative DNA damage is limited. The present cross-sectional study investigated the association between these job stress models/concepts and oxidative DNA damage as a possible mediator of the adverse health effects of job stress. A total of 166 male and 51 female workers of a manufacturing factory in Japan were surveyed using a mailed questionnaire regarding job stressors and demographic, occupational, and lifestyle variables. Urinary concentrations of 8-hydroxy-2'-deoxyguanosine (8-OHdG), a biomarker of oxidative DNA damage, were also measured. In male subjects, the urinary concentrations of 8-OHdG were significantly higher among the group with lower interactional justice, one of the two components of organizational justice; however, no association was observed with the DC model or the ERI model. In female subjects, high job demands/control ratio was significantly and positively associated with the urinary concentrations of 8-OHdG. Interactional justice among male workers and the DC model-based strain among female workers may be associated with increased urinary concentrations of 8-OHdG which possibly reflects oxidative DNA damage.

  9. Modern terrorism: concept and approach analysis

    OpenAIRE

    CHAIKA ALEXANDER VIKTOROVICH

    2015-01-01

    The problem of modern terrorism as an image of counterculture environment is considered. The analysis of concepts and approaches of foreign and native authors, specialists of terrorism problem research was conducted. Separate features of the modern terrorism are considered and emphasized. The author drew conceptual conclusions on the basis of dialectical approach to modern terrorism counterculture phenomenon research.

  10. Comprehensive change management concepts. Development of a participatory approach.

    Science.gov (United States)

    Zink, Klaus J; Steimle, Ulrich; Schröder, Delia

    2008-07-01

    During the last years, many change projects in organizations did not have the planned success. Therefore at first, the causes for these failures and the success factors contributing to organizational change have to be discussed. To get better results, a comprehensive change management concept has been developed and tested in an ongoing research project. By using concepts for an integrated assessment and design of organizations, an approach for analyzing the current situation has been elaborated to identify "lack of integration" in the change initiatives of a company. To realize an integrated overall approach of modernization by harmonizing different methods and concepts, first, one has to prove their relationship to policy and strategy (vertical harmonization). The second step is to take into account the fact that there has to be a logical fit between the single concepts (horizontal harmonization). But even if all elements are logically coherent, that does not mean that the people working in the company also see this coherence. Therefore, in addition to the "logical fit", one has to examine the "psychological fit". In the end, a concept for analyzing the status quo in an organization as a result of "objective data" and "subjective data" originated. Subsequently, instruments for harmonizing different modernizing concepts have been applied. As part of the comprehensive change management concept participatory ergonomic approaches have been used during the project. The present study shows this approach in the case of one company.

  11. Redefining smart city concept with resilience approach

    Science.gov (United States)

    Arafah, Y.; Winarso, H.

    2017-06-01

    The smart city concept originally aimed at dealing with various urban problems, in particular, those related to the urban environment and infrastructure, such as modeling transport flow in a city. As it developed, the concept is now widely used to accelerate the process of urban management by using IT technology and by the availability of big data. However, the smart city discourses are still debated. There is a number of critical literature on the discourses; some are more concerned with the use and development of information communication technology (ICT). ICT and modern technology are considered the key aspect of the smart city concept. Meanwhile, others emphasize the importance of the people who operate the technology. Very few, if any, literature emphasizes the importance of resilience in the smart city discourse. The city as a complex system should have the ability to be resilient, especially when technology fails either due to technical/man-made or natural disasters. This paper aims to redefine the smart city concept in urban planning through a literature study in the context of planning using a resilience approach. This paper describes and defines what the smart city concept is, what it means, as well as explains the relation and linkage of the importance of using resilience approach in defining the smart city. Factors of resilience will lead to a soft infrastructure approach, such as enhancement in many aspects, e.g. community capacity, social and human capital, knowledge inclusion, participation, social innovation, and social equity. Discussion and analysis are conducted through a deep literature study using systematic literature review methodology.

  12. Safe-life and damage-tolerant design approaches for helicopter structures

    Science.gov (United States)

    Reddick, H. K., Jr.

    1983-01-01

    The safe-life and damage-tolerant design approaches discussed apply to both metallic and fibrous composite helicopter structures. The application of these design approaches to fibrous composite structures is emphasized. Safe-life and damage-tolerant criteria are applied to all helicopter flight critical components, which are generally categorized as: dynamic components with a main and tail rotor system, which includes blades, hub and rotating controls, and drive train which includes transmission, and main and interconnecting rotor shafts; and the airframe, composed of the fuselage, aerodynamic surfaces, and landing gear.

  13. Silvicultural approaches to animal damage management in Pacific Northwest forests.

    Science.gov (United States)

    Hugh C. Black

    1992-01-01

    This book examines the potential of Silvicultural approaches for managing animal damage in forests at two levels: management of free-to-grow stands and sitespecific practices that foster prompt and successful regeneration. Introductory chapters provide a historical perspective of animal damage management in the Pacific Northwest, describe the elements of an integrated...

  14. [Locus of control and self-concept in interpersonal conflict resolution approaches].

    Science.gov (United States)

    Hisli Sahin, Nesrin; Basim, H Nejat; Cetin, Fatih

    2009-01-01

    The purpose of this study was to investigate the relationship between self-concept and locus of control in interpersonal conflict resolution approaches and to determine the predictors of conflict resolution approach choices. The study included 345 students aged between 18 and 28 years that were studying at universities in Ankara. Data were collected using the Interpersonal Conflict Resolution Approaches Scale to measure conflict resolution approaches, the Social Comparison Scale to measure self-concept, and the Internal-External Locus of Control Scale to measure locus of control. It was observed that confrontation approach to interpersonal conflict was predicted by self-concept (beta = 0.396, P resolution approaches. In addition to these findings, it was observed that females used self-disclosure (beta = -0.163, P resolution processes. Self-concept and locus of control were related to the behaviors adopted in the interpersonal conflict resolution process. Individuals with a positive self-concept and an internal locus of control adopted solutions to interpersonal conflict resolution that were more effective and constructive.

  15. [Resilience: an interdisciplinary approach to concept and findings].

    Science.gov (United States)

    Korn, Lena

    2012-01-01

    First, the concept of the term "resilience" is introduced and summarized as an adaptive, dynamic "buffering process" of children's mental power of resistance against biological, psychological and psychosocial development risks. Subsequently, based on a critical discussion of the current research findings, protective factors are presented, which is followed by an approach to the concept of resilience from interdisciplinary perspectives. The latest findings from developmental neurobiology show that genetic as well as environmental factors have their important share in the development of resilience. This builds a bridge to the consideration of resilience with regard to attachment theory. Accordingly secure attachment could be seen as a condition for a resilient conduct of life. In this context, the concept of "earned security" is additionally taken into account. Furthermore, the relevance of resilience for the field of pedagogics is shortly and critically considered. With reference to a psychoanalytic approach to the concept of resilience self-regulation, internal integrity, mentalization and self-reflection are elaborated on, as well as the similarity to the psychoanalytic concept of ego strength. In conclusion, a critical discussion of the concept of resilience and its benefits as well as potential risks related to it is presented.

  16. Development of damage control training scenarios of naval ships based on simplified vulnerability analysis results

    Directory of Open Access Journals (Sweden)

    Dong-Ki Park

    2016-07-01

    Full Text Available Given the growing interest in damage control training for the naval ships and their organizations, expectations for a new concept of training program have also increased. The existing training programs and its concept focus on training crew to be more proficient and skilled so that they can respond better to damage situations, i.e., fires and flooding. This paper suggests a development procedure of damage control training scenarios using the survivability analysis results as a new concept of damage control training programs employing advanced systems such as damage control console, automation system, and kill cards. This approach could help the decision maker not only enhance his or her capability but also improve the reacting capability of crew members for complex situations induced by a weapon hit.

  17. A thermodynamic approach to fatigue damage accumulation under variable loading

    International Nuclear Information System (INIS)

    Naderi, M.; Khonsari, M.M.

    2010-01-01

    We put forward a general procedure for assessment of damage evolution based on the concept of entropy production. The procedure is applicable to both constant- and variable amplitude loading. The results of a series of bending fatigue tests under both two-stage and three-stage loadings are reported to investigate the validity of the proposed methodology. Also presented are the results of experiments involving bending, torsion, and tension-compression fatigue tests with Al 6061-T6 and SS 304 specimens. It is shown that, within the range of parameters tested, the evolution of fatigue damage for these materials in terms of entropy production is independent of load, frequency, size, loading sequence and loading history. Furthermore, entropy production fractions of individual amplitudes sums to unity.

  18. Heat deposition, damage, and tritium breeding characteristics in thick liquid wall blanket concepts

    International Nuclear Information System (INIS)

    Youssef, M.Z.; Abdou, M.A.

    2000-01-01

    The advanced power extraction (APEX) study aims at exploring new and innovative blanket concepts that can efficiently extract power from fusion devices with high neutron wall load. Among the concepts under investigation is the free liquid FW/liquid blanket concept in which a fast flowing liquid FW (∼2-3 cm) is followed by thick flowing blanket (B) of ∼40-50 cm thickness with minimal amount of structure. The liquid FW/B are contained inside the vacuum vessel (VV) with a shielding zone (S) located either behind the VV and outside the vacuum boundary (case A) or placed after the FW/B and inside the VV (case B). In this paper we investigate the nuclear characteristics of this concept in terms of: (1) attenuation capability of the liquid FW/B/S and protection of the VV and magnet against radiation damage; (2) profiles of tritium production rate and tritium breeding ratio (TBR) for several liquid candidates; and (3) profiles of heat deposition rate and power multiplication. The candidate liquid breeders considered are Li, Flibe, Li-Sn, and Li-Pb. Parameters varied are (1) FW/B thickness, L, (2) Li-6 enrichment and (3) thickness of the shield

  19. Some numerical approaches of creep, thermal shock, damage

    Indian Academy of Sciences (India)

    Creep can be satisfactorily described by a kinematic hardening, and exhibits different creep rates in tension and compression. Concerning the thermal shock of materials, the numerical approach depends whether or not the material is able to develop a sprayed out damage, leading to micro- or macro-cracking. Finally ...

  20. Anisotropic creep damage in the framework of continuum damage mechanics

    International Nuclear Information System (INIS)

    Caboche, J.L.

    1983-01-01

    For some years, various works have shown the possibility of applying continuum mechanics to model the evolution of the damage variable, initially introduced by Kachanov. Of interest here are the complex problems posed by the anisotropy which affects both the elastic behaviour and the viscoplastic one, and also the rupture phenomenon. The main concepts of the Continuum Damage Mechanics are briefly reviewed together with some classical ways to introduce anisotropy of damage in the particular case of proportional loadings. Based on previous works, two generalizations are presented and discussed, which use different kinds of tensors to describe the anisotropy of creep damage: - The first one, by Murakami and Ohno introduces a second rank damage tensor and a net stress tensor through a net area definition. The effective stress-strain behaviour is then obtained by a fourth rank tensor. - The second theory, by the author, uses one effective stress tensor only, defined in terms of the macroscopic strain behaviour, through a fourth-order non-symmetrical damage tensor. The two theories are compared at several levels: difference and similarities are pointed out for the damage evolution during tensile creep as well as for anisotropy effects. The possibilities are discussed and compared on the basis of some existing experimental results, which leads to a partial validation of the two approaches. (orig.)

  1. The cost of the radiation damage by the ALARA conception

    International Nuclear Information System (INIS)

    Kononovich, A.L.; Nosov, A.V.; Ivanov, A.V.; Pechkurov, A.V.

    2000-01-01

    A basis for the determination of the cost of the radiation risk as a method for its optimization are given. The correlation between different components of the risk is considered. The aim for optimization as a requirement on decrease of the cumulative risk is formulated. The reliability in the use of mathematic modelling on the determination of the cost of the risk and damage is noted. The lines of approach to determination of the cost of the risk based on the direct analysis of financial expenses are proposed. The results of estimation of the cost of the risk are given. The use of suggested approach is demonstrated on a hypothetical example [ru

  2. Unifying the concept of consciousness across the disciplines: A concept-based, cross-cultural approach

    Science.gov (United States)

    Jones, Peter N.

    The majority of studies concerning consciousness have examined and modeled the concept of consciousness in terms of particular lines of inquiry, a process that has circumscribed the general applicability of any results from such approaches. The purpose of this dissertation was to study consciousness from a concept-based, cross-cultural approach and to attempt to unify the concept across the cultures examined. The 4 cultures are the academic disciplines of philosophy, physics, psychology, and anthropology. Consciousness was examined in terms of how the concept is framed and where the major limitations in each line of inquiry occur. The rationale for examining consciousness as a concept across 4 cultures was to determine whether there was any common component in each line's framing that could be used to unify the concept. The study found that experience itself was the primary unifying factor in each field's framing and that experience was treated as a nonreducible property within each line of inquiry. By taking experience itself (but not subjective experience) as a fundamental property, each culture's concept of consciousness becomes tractable. As such, this dissertation argues that experience should be taken as a fundamental property of the concept. The significance of this analysis is that by taking experience as a fundamental property, it becomes possible to unify the concept across the 4 cultures. This unification is presented as a unity thesis, which is a theory arguing for unification of the concept based on the fundamental of experience. Following this theoretical examination, this paper discusses several key implications of the unity thesis, including implications of the unity thesis for the current status of altered states of consciousness and for the so-called hard and easy problems associated with the concept (at least within Occidental ontology). It is argued that the so-called hard problem does not exist when experience is taken as a fundamental property

  3. Atomic and Molecular Data Needs for Radiation Damage Modeling: Multiscale Approach

    International Nuclear Information System (INIS)

    Yakubovich, Alexander V.; Solov'yov, Andrey V.; Surdutovich, Eugene

    2011-01-01

    We present a brief overview of the multiscale approach towards understanding of the processes responsible for the radiation damage caused by energetic ions. This knowledge is very important, because it can be utilized in the ion-beam cancer therapy, which is one of the most advanced modern techniques to cure certain type of cancer. The central element of the multiscale approach is the theoretical evaluation and quantification of the DNA damage within cell environment. To achieve this goal one needs a significant amount of data on various atomic and molecular processes involved into the cascade of events starting with the ion entering and propagation in the biological medium and resulting in the DNA damage. The discussion of the follow up biological processes are beyond the scope of this brief overview. We consider different paths of the DNA damage and focus on the the illustration of the thermo-mechanical effects caused by the propagation of ions through the biological environment and in particular on the possibility of the creation of the shock waves in the vicinity of the ion tracks. We demonstrate that at the initial stages after ion's passage the shock wave is so strong that it can contribute to the DNA damage due to large pressure gradients developed at the distances of a few nanometers from the ionic tracks. This novel mechanism of the DNA damage provides an important contribution to the cumulative biodamage caused by low-energy secondary electrons, holes and free radicals.

  4. Space and place concepts analysis based on semiology approach in residential architecture

    Directory of Open Access Journals (Sweden)

    Mojtaba Parsaee

    2015-12-01

    Full Text Available Space and place are among the fundamental concepts in architecture about which many discussions have been held and the complexity and importance of these concepts were focused on. This research has introduced an approach to better cognition of the architectural concepts based on theory and method of semiology in linguistics. Hence, at first the research investigates the concepts of space and place and explains their characteristics in architecture. Then, it reviews the semiology theory and explores its concepts and ideas. After obtaining the principles of theory and also the method of semiology, they are redefined in an architectural system based on an adaptive method. Finally, the research offers a conceptual model which is called the semiology approach by considering the architectural system as a system of signs. The approach can be used to decode the content of meanings and forms and analyses of the architectural mechanism in order to obtain its meanings and concepts. In this way and based on this approach, the residential architecture of the traditional city of Bushehr – Iran was analyzed as a case of study and its concepts were extracted. The results of this research demonstrate the effectiveness of this approach in structure detection and identification of an architectural system. Besides, this approach has the capability to be used in processes of sustainable development and also be a basis for deconstruction of architectural texts. The research methods of this study are qualitative based on comparative and descriptive analyses.

  5. Concept maps and nursing theory: a pedagogical approach.

    Science.gov (United States)

    Hunter Revell, Susan M

    2012-01-01

    Faculty seek to teach nursing students how to link clinical and theoretical knowledge with the intent of improving patient outcomes. The author discusses an innovative 9-week concept mapping activity as a pedagogical approach to teach nursing theory in a graduate theory course. Weekly concept map building increased student engagement and fostered theoretical thinking. Unexpectedly, this activity also benefited students through group work and its ability to enhance theory-practice knowledge.

  6. Coupling Damage-Sensing Particles to the Digitial Twin Concept

    Science.gov (United States)

    Hochhalter, Jacob; Leser, William P.; Newman, John A.; Gupta, Vipul K.; Yamakov, Vesselin; Cornell, Stephen R.; Willard, Scott A.; Heber, Gerd

    2014-01-01

    The research presented herein is a first step toward integrating two emerging structural health management paradigms: digital twin and sensory materials. Digital twin is an emerging life management and certification paradigm whereby models and simulations consist of as-built vehicle state, as-experienced loads and environments, and other vehicle-specific history to enable high-fidelity modeling of individual aerospace vehicles throughout their service lives. The digital twin concept spans many disciplines, and an extensive study on the full domain is out of the scope of this study. Therefore, as it pertains to the digital twin, this research focused on one major concept: modeling specifically the as-manufactured geometry of a component and its microstructure (to the degree possible). The second aspect of this research was to develop the concept of sensory materials such that they can be employed within the digital twin framework. Sensory materials are shape-memory alloys that undergo an audible phase transformation while experiencing sufficient strain. Upon embedding sensory materials with a structural alloy, this audible transformation helps improve the reliability of crack detection especially at the early stages of crack growth. By combining these two early-stage technologies, an automated approach to evidence-based inspection and maintenance of aerospace vehicles is sought.

  7. The concept of ''pollution damage'' in the maritime conventions governing liability and compensation for oil spills

    International Nuclear Information System (INIS)

    Jacobsson, M.

    2000-01-01

    Compensation for pollution damage caused by spills from oil tankers is governed by an international regime elaborated under the auspices of the International Maritime Organization (I.M.O.). The framework for the regime was originally by the 1969 International Convention on Civil Liability for Oil Pollution Damage (1969 Civil liability convention) and the 1971 International Convention on the Establishment of an International Fund for Compensation for Oil Pollution Damage (1971 Fund Convention). This old regime was amended in 1992 by two protocols, and the amended Conventions are known as 1992 Civil Liability Convention and the 1992 Fund Convention. The Civil Liability conventions govern the liability of ship-owners for oil pollution damage. The Conventions lay down the principle of strict liability for ship-owners and create a system of compulsory liability insurance. The ship-owner is normally entitled to limit his liability to an amount which is linked to the tonnage of his ship. The regime of liability and the funds created by the 1971 and 1992 Conventions are analyzed in detail. Are studied as following: the concepts of pollution damage and the safeguard measures or preventive measures, the question of receivability for compensation demands (damage to properties, cleansing operations, costs, economic loss). The question of compensation conditions for the only economic loss and the damage to environment are tackled. This expose is concluded by enlightening the contribution brought by the previously named Conventions to the International law about the civil liability. (N.C.)

  8. The aggregation of climate change damages. A welfare theoretic approach

    International Nuclear Information System (INIS)

    Fankhauser, S.; Pearce, D.W.; Tol, R.S.J.

    1997-01-01

    The economic value of environmental goods is commonly determined using the concepts of willingness to pay (WTP) or willingness to accept (WTA). However, the WTP/WTA observed in different countries (or between individuals) will differ according to socio-economic characteristics, in particular income. This notion of differentiated values for otherwise identical goods (say, a given reduction in mortality risk) has been criticized as unethical, most recently in the context of the 'social cost' chapter of the IPCC Second Assessment Report. These critics argue that, being a function of income, WTP/WTA estimates reflect the unfairness in the current income distribution, and for equity reasons uniform per-unit values should therefore be applied across individuals and countries. This paper analyses the role of equity in the aggregation of climate change damage estimates, using basic tools of welfare economics. It shows one way of how WTP/WTA estimates can be corrected in aggregation if the underlying income distribution is considered unfair. It proposes that in the aggregation process individual estimates be weighted with an equity factor derived from the social welfare and utility functions. Equity weighting can significantly increase aggregate (global) damage figures, although some specifications of weighting functions also imply reduced estimates. The paper also shows that while the postulate of uniform per-unit values is compatible with a wide range of 'reasonable' utility and welfare specifications, there are also cases where the common-value notion is not compatible with defensible welfare concepts. 3 tabs., 32 refs

  9. Damage approach: A new method for topology optimization with local stress constraints

    DEFF Research Database (Denmark)

    Verbart, Alexander; Langelaar, Matthijs; van Keulen, Fred

    2016-01-01

    In this paper, we propose a new method for topology optimization with local stress constraints. In this method, material in which a stress constraint is violated is considered as damaged. Since damaged material will contribute less to the overall performance of the structure, the optimizer...... will promote a design with a minimal amount of damaged material. We tested the method on several benchmark problems, and the results show that the method is a viable alternative for conventional stress-based approaches based on constraint relaxation followed by constraint aggregation....

  10. What if quality of damage data is poor: an Entity-Vulnerability approach for flood vulnerability assessment

    Science.gov (United States)

    Naso, Susanna; Chen, Albert S.; Djordjević, Slobodan; Aronica, Giuseppe T.

    2015-04-01

    The classical approach to flood defence, aimed at reducing the probability of flooding through hard defences, has been substituted by flood risk management approach which accepts the idea of coping with floods and aims at reducing not only the probability of flooding, but also the consequences. In this view, the concept of vulnerability becomes central, such as the (non-structural) measures for its increment. On 22 November 2011, an exceptional rainstorm hit the Longano catchment (North-East part of Sicily, Italy) producing local heavy rainfall, mud-debris flow and flash flooding. The flash flood involved property, buildings, roads and more than 100 commercial estates have suffered severe damages. Some days after the event, the municipality provided people forms to describe the damages that occurred on their properties. Unfortunately, the lack of common guidelines in compiling them, their coarseness and the impossibility to have monetary information on them (such us damage data from previous events), did not allow the implementation of a detailed damage analysis. What we're developing in this work is a method for a qualitative evaluation of the consequences of floods, based on vulnerability curves for structures and classes of entities at risk. The difficulty in deriving the vulnerability curves for different building typologies, as function of the water depth, was due to the lack of quantitative information both on damages caused by previous events and on buildings' value. To solve the problem we submitted a questionnaire to a team of experts asking for an estimation of building damages to different hypothetical inundation depths. What we wanted to obtain was deriving the vulnerability data from technicians' experience, believing in the fundamental importance of the collaboration among research and professional engineers. Through the elaboration and the synthesis of the experts' estimations we derived the vulnerability curves for different building typologies and

  11. Evaluation of dimensions, approaches and concepts of resilience in ...

    African Journals Online (AJOL)

    ... the social and economic dimensions, approaches and concepts of resilient city as one of the new approaches in the field of reducing vulnerability and promoting crisis management. This research is a review study, which has been collected and investigated and analyzed from various library and documentary resources.

  12. A study of concept-based similarity approaches for recommending program examples

    Science.gov (United States)

    Hosseini, Roya; Brusilovsky, Peter

    2017-07-01

    This paper investigates a range of concept-based example recommendation approaches that we developed to provide example-based problem-solving support in the domain of programming. The goal of these approaches is to offer students a set of most relevant remedial examples when they have trouble solving a code comprehension problem where students examine a program code to determine its output or the final value of a variable. In this paper, we use the ideas of semantic-level similarity-based linking developed in the area of intelligent hypertext to generate examples for the given problem. To determine the best-performing approach, we explored two groups of similarity approaches for selecting examples: non-structural approaches focusing on examples that are similar to the problem in terms of concept coverage and structural approaches focusing on examples that are similar to the problem by the structure of the content. We also explored the value of personalized example recommendation based on student's knowledge levels and learning goal of the exercise. The paper presents concept-based similarity approaches that we developed, explains the data collection studies and reports the result of comparative analysis. The results of our analysis showed better ranking performance of the personalized structural variant of cosine similarity approach.

  13. Reactor concepts for laser fusion

    International Nuclear Information System (INIS)

    Meier, W.R.; Maniscalco, J.A.

    1977-07-01

    Scoping studies were initiated to identify attractive reactor concepts for producing electric power with laser fusion. Several exploratory reactor concepts were developed and are being subjected to our criteria for comparing long-range sources of electrical energy: abundance, social costs, technical feasibility, and economic competitiveness. The exploratory concepts include: a liquid-lithium-cooled stainless steel manifold, a gas-cooled graphite manifold, and fluidized wall concepts, such as a liquid lithium ''waterfall'', and a ceramic-lithium pellet ''waterfall''. Two of the major reactor vessel problems affecting the technical feasibility of a laser fusion power plant are: the effects of high-energy neutrons and cyclical stresses on the blanket structure and the effects of x-rays and debris from the fusion microexplosion on the first-wall. The liquid lithium ''waterfall'' concept is presented here in more detail as an approach which effectively deals with these damaging effects

  14. The need to disentangle key concepts from ecosystem-approach jargon.

    Science.gov (United States)

    Waylen, K A; Hastings, E J; Banks, E A; Holstead, K L; Irvine, R J; Blackstock, K L

    2014-10-01

    The ecosystem approach--as endorsed by the Convention on Biological Diversity (CDB) in 2000-is a strategy for holistic, sustainable, and equitable natural resource management, to be implemented via the 12 Malawi Principles. These principles describe the need to manage nature in terms of dynamic ecosystems, while fully engaging with local peoples. It is an ambitious concept. Today, the term is common throughout the research and policy literature on environmental management. However, multiple meanings have been attached to the term, resulting in confusion. We reviewed references to the ecosystem approach from 1957 to 2012 and identified 3 primary uses: as an alternative to ecosystem management or ecosystem-based management; in reference to an integrated and equitable approach to resource management as per the CBD; and as a term signifying a focus on understanding and valuing ecosystem services. Although uses of this term and its variants may overlap in meaning, typically, they do not entirely reflect the ethos of the ecosystem approach as defined by the CBD. For example, there is presently an increasing emphasis on ecosystem services, but focusing on these alone does not promote decentralization of management or use of all forms of knowledge, both of which are integral to the CBD's concept. We highlight that the Malawi Principles are at risk of being forgotten. To better understand these principles, more effort to implement them is required. Such efforts should be evaluated, ideally with comparative approaches, before allowing the CBD's concept of holistic and socially engaged management to be abandoned or superseded. It is possible that attempts to implement all 12 principles together will face many challenges, but they may also offer a unique way to promote holistic and equitable governance of natural resources. Therefore, we believe that the CBD's concept of the ecosystem approach demands more attention. © 2014 Society for Conservation Biology.

  15. Concept for integrated environmental monitoring. Scientific approach

    Energy Technology Data Exchange (ETDEWEB)

    Haber, W [comp.; Schoenthaler, K; Kerner, H F; Koeppel, J; Spandau, L

    1998-09-01

    Despite considerable expenditures for environmental protection and intensified efforts in the areas of environmental research and monitoring, environmental damage increasingly occurs, sometimes with global effects, largely due to the lack of early diagnosis. In the past few years various institutions have therefore demanded improvements in environmental monitoring. The Council of Experts on Environmental Issues (`Rat von Sachverstaendigen fuer Umweltfragen`, SRU), in particular, in its `Environmental Report` of 1987 and in its Special Report on `General Ecological Environmental Monitoring` (1990) presented far-reaching demands for a nationwide ecological early warning system which should integrate the various local, regional, national, and even global monitoring levels, and which should encompass an environmental monitoring of entire ecosystems at representative locations. This is aimed at creating the prerequisites for - detection of long-term gradual environmental change, - confirmation of refutation of initial assumptions regarding the causes of these environmental changes, - permitting decisions on preventive actions to stabilize or improve environmental conditions and - making it possible to assess the success of environmental protection policies. This report includes an abbreviated version and documentation of the conference on the `Concept for Integrated Environmental Monitoring` and the final report `Specification of the Concept for Integrated Environmental Monitoring from the Perspective of Nature Conservation`. (orig.)

  16. Per-Sample Multiple Kernel Approach for Visual Concept Learning

    Directory of Open Access Journals (Sweden)

    Ling-Yu Duan

    2010-01-01

    Full Text Available Learning visual concepts from images is an important yet challenging problem in computer vision and multimedia research areas. Multiple kernel learning (MKL methods have shown great advantages in visual concept learning. As a visual concept often exhibits great appearance variance, a canonical MKL approach may not generate satisfactory results when a uniform kernel combination is applied over the input space. In this paper, we propose a per-sample multiple kernel learning (PS-MKL approach to take into account intraclass diversity for improving discrimination. PS-MKL determines sample-wise kernel weights according to kernel functions and training samples. Kernel weights as well as kernel-based classifiers are jointly learned. For efficient learning, PS-MKL employs a sample selection strategy. Extensive experiments are carried out over three benchmarking datasets of different characteristics including Caltech101, WikipediaMM, and Pascal VOC'07. PS-MKL has achieved encouraging performance, comparable to the state of the art, which has outperformed a canonical MKL.

  17. Per-Sample Multiple Kernel Approach for Visual Concept Learning

    Directory of Open Access Journals (Sweden)

    Tian Yonghong

    2010-01-01

    Full Text Available Abstract Learning visual concepts from images is an important yet challenging problem in computer vision and multimedia research areas. Multiple kernel learning (MKL methods have shown great advantages in visual concept learning. As a visual concept often exhibits great appearance variance, a canonical MKL approach may not generate satisfactory results when a uniform kernel combination is applied over the input space. In this paper, we propose a per-sample multiple kernel learning (PS-MKL approach to take into account intraclass diversity for improving discrimination. PS-MKL determines sample-wise kernel weights according to kernel functions and training samples. Kernel weights as well as kernel-based classifiers are jointly learned. For efficient learning, PS-MKL employs a sample selection strategy. Extensive experiments are carried out over three benchmarking datasets of different characteristics including Caltech101, WikipediaMM, and Pascal VOC'07. PS-MKL has achieved encouraging performance, comparable to the state of the art, which has outperformed a canonical MKL.

  18. Risk evaluation method for faults by engineering approach. (2) Application concept of margin analysis utilizing accident sequences

    International Nuclear Information System (INIS)

    Kamiya, Masanobu; Kanaida, Syuuji; Kamiya, Kouichi; Sato, Kunihiko; Kuroiwa, Katsuya

    2016-01-01

    The influence of the fault displacement on the facility should to be evaluated not only by the activity of the fault but also by obtaining risk information by considering scenarios including such as the frequency and the degree of the hazard, which should be an appropriate approach for nuclear safety. An applicable concept of margin analysis utilizing accident sequences for evaluating the influence of the fault displacement is proposed. By use of this analysis, we can evaluate of the safety functions and margin for core damage, verify the efficiency of equipment of portable type and make a decision to take additional measures to reduce the risk by using obtained risk information. (author)

  19. Applications of nonequilibrium melting concept to damage-accumulation processes

    International Nuclear Information System (INIS)

    Lam, N.Q.; Okamoto, P.R.

    1998-01-01

    The authors recent study of crystalline-to-amorphous transformation led to the successful development of a unified thermodynamic description of disorder-induced amorphization and heat-induced melting, based on a generalized version of the Lindemann melting criterion. The generalized criterion requires that the melting temperature of a defective crystal decreases with increasing static atomic disorder. Hence, any crystal can melt at temperatures below the melting point of its perfect crystalline state when driven far from equilibrium by introducing critical amounts of misfitting solute atoms and lattice imperfections, radiation damage, and/or tensile stresses. This conceptual approach to nonequilibrium melting provides new insight into long-standing materials problems such as brittle fracture, embrittlement, and environmentally-induced cracking, for example irradiation-assisted stress corrosion cracking

  20. Concepts and approaches for marine ecosystem research with reference to the tropics

    OpenAIRE

    Matthias Wolff

    2002-01-01

    The present article gives an overview on the leading concepts and modelling approaches for marine ecosystems’ research including (1) The trophodynamic theory of pelagic ecosystems, (2) Compartment/network models, (3) Mesocosm experiments and (4) Individual based modelling approaches and virtual ecosystems (VE). The main research questions addressed, as well as the potential and limits of each approach, are summarized and discussed and it is shown how the concept of ecosystem has changed over ...

  1. Systems approach to the study of brain damage in the very preterm newborn

    Science.gov (United States)

    Leviton, Alan; Gressens, Pierre; Wolkenhauer, Olaf; Dammann, Olaf

    2015-01-01

    Background: A systems approach to the study of brain damage in very preterm newborns has been lacking. Methods: In this perspective piece, we offer encephalopathy of prematurity as an example of the complexity and interrelatedness of brain-damaging molecular processes that can be initiated inflammatory phenomena. Results: Using three transcription factors, nuclear factor-kappa B (NF-κB), Notch-1, and nuclear factor erythroid 2 related factor 2 (NRF2), we show the inter-connectedness of signaling pathways activated by some antecedents of encephalopathy of prematurity. Conclusions: We hope that as biomarkers of exposures and processes leading to brain damage in the most immature newborns become more readily available, those who apply a systems approach to the study of neuroscience can be persuaded to study the pathogenesis of brain disorders in the very preterm newborn. PMID:25926780

  2. CONSOLIDATION POLICY: PAST, PRESENT AND FUTURE APPROACHES TO THE CONCEPT OF CONTROL

    Directory of Open Access Journals (Sweden)

    Ienciu Alin Ionel

    2010-07-01

    Full Text Available Preparing consolidated financial statements has been a common practice for groups of companies around the world for a relatively long time, going back one century in the USA and tens of years in different European countries.A far-reaching issue regarding consolidation accounting policy is the concept of control, as it holds a crucial role in determining the basis of consolidation and the applicable method of consolidation and subsequently in influencing the content of the group financial statements. We focus in our article on the concept of exclusive control as it is approached by the relevant International, American and European standards, casting light also on possible future developments of this concept. The objective of our study is to acknowledge the differences and similarities between the approaches to the control concept, closing with the presentation of the influences of these approaches on the basis of consolidation.

  3. Design and Analysis of a Stiffened Composite Structure Repair Concept

    Science.gov (United States)

    Przekop, Adam

    2011-01-01

    A design and analysis of a repair concept applicable to a stiffened thin-skin composite panel based on the Pultruded Rod Stitched Efficient Unitized Structure is presented. Since the repair concept is a bolted repair using metal components, it can easily be applied in the operational environment. Initial analyses are aimed at validating the finite element modeling approach by comparing with available test data. Once confidence in the analysis approach is established several repair configurations are explored and the most efficient one presented. Repairs involving damage to the top of the stiffener alone are considered in addition to repairs involving a damaged stiffener, flange and underlying skin. High fidelity finite element modeling techniques such as mesh-independent definition of compliant fasteners, elastic-plastic metallic material properties and geometrically nonlinear analysis are utilized in the effort. The results of the analysis are presented and factors influencing the design are assessed and discussed.

  4. The pluralistic water research concept - a new human-water system research approach

    Science.gov (United States)

    Evers, Mariele; Höllermann, Britta; Almoradie, Adrian; Taft, Linda; Garcia-Santos, Glenda

    2017-04-01

    Sustainable water resources management has been and still is a main challenge for decision makers even though for the past number of decades integrative approaches and concepts (e.g. Integrated Water Resources Management - IWRM) have been developed to address problems on floods, droughts, water quality, water quantity, environment and ecology. Although somehow these approaches are aiming to address water related problems in an integrative approach and to some extent include or involve society in the planning and management, they still lack some of the vital components in including the social dimensions and their interaction with water. Understanding these dynamics in a holistic way and how they are shaped by time and space may tackle these shortcomings and provide more effective and sustainable management solutions with respect to a set of potential present social actions and values as well as possible futures. This paper aims to discuss challenges to coherently and comprehensively integrate the social dimensions of different human-water concepts like IWRM, socio-hydrology and waterscape. Against this background it will develop criteria for an integrative approach and present a newly developed concept termed pluralistic water research (PWR) concept. PWR is not only a pluralistic but also an integrative and interdisciplinary approach to acknowledge the social and water dimensions and their interaction and dynamics by considering more than one perspective of a water-related issue, hereby providing a set of multiple (future) developments. Our PWR concept will be illustrated by a case study application of the Canary island La Gomera. Furthermore an outlook on further possible developments of the PWR concept will be presented and discussed.

  5. An approach to modelling radiation damage by fast ionizing particles

    International Nuclear Information System (INIS)

    Thomas, G.E.

    1987-01-01

    The paper presents a statistical approach to modelling radiation damage in small biological structures such as enzymes, viruses, and some cells. Irreparable damage is assumed to be caused by the occurrence of ionizations within sensitive regions. For structures containing double-stranded DNA, one or more ionizations occurring within each strand of the DNA will cause inactivation; for simpler structures without double-stranded DNA a single ionization within the structure will be sufficient for inactivation. Damaging ionizations occur along tracks of primary irradiating particles or along tracks of secondary particles released at primary ionizations. An inactivation probability is derived for each damage mechanism, expressed in integral form in terms of the radius of the biological structure (assumed spherical), rate of ionization along primary tracks, and maximum energy for secondary particles. The performance of each model is assessed by comparing results from the model with those derived from data from various experimental studies extracted from the literature. For structures where a single ionization is sufficient for inactivation, the model gives qualitatively promising results; for larger more complex structures containing double-stranded DNA, the model requires further refinements. (author)

  6. A Concept for Providing Warning of Chelyabinsk-like Meteors, including those approaching from the Sun

    Science.gov (United States)

    Dunham, D. W.; Reitsema, H.; Lu, E.; Arentz, R.; Linfield, R.; Chapman, C. R.; Farquhar, R. W.; Furfaro, R.; Eismont, N. A.; Ledkov, A.; Chumachenko, E.

    2013-12-01

    The detonation of a 20m-asteroid above Chelyabinsk, Russia on 2013 February 15 shows that even small asteroids can cause extensive damage. Earth-based telescopes have found smaller harmless objects, such as 2008 TC3, discovered 20h before it exploded over northern Sudan . 2008 TC3 remains the only asteroid discovered before it hit Earth because it approached Earth from the night side, where it was observed by large telescopes searching for near-Earth objects. The larger object that exploded over Chelyabinsk approached Earth from the day side, from too close to the Sun to be detected from Earth. A sizeable telescope in an orbit about the Sun-Earth L1 (SE-L1) libration point 1.5 million km from Earth towards the Sun (about 4 times the distance to the Moon) could find objects like the 'Chelyabinsk' asteroid approaching approximately from the line of sight to the Sun about a day before Earth closest approach; this would find the approximately 35% of asteroids that approach Earth from a direction too close to the Sun to be observed, or likely to be missed, from the ground. Our concept would give at least several hours, and often a day or more, to take protective measures, rather than the approximately two-minute interval between the flash and shock wave arrival that occurred in Chelyabinsk. An important reason for providing warning of these events, even smaller harmless ones that explode high in the atmosphere with the force of an atomic bomb, is to prevent mistaking such an event for a nuclear attack that could trigger a devastating nuclear war. This concept could also discover many small asteroids that would not impact Earth; some of them would likely be suitable for retrieval to move to a lunar orbit for study by astronauts in the next decade. A concept using a space telescope similar to that needed by our concept is already conceived by the B612 Foundation, whose planned Sentinel Space Telescope could find nearly all 140m and larger near-Earth objects (NEO

  7. Reconstruction of structural damage based on reflection intensity spectra of fiber Bragg gratings

    International Nuclear Information System (INIS)

    Huang, Guojun; Wei, Changben; Chen, Shiyuan; Yang, Guowei

    2014-01-01

    We present an approach for structural damage reconstruction based on the reflection intensity spectra of fiber Bragg gratings (FBGs). Our approach incorporates the finite element method, transfer matrix (T-matrix), and genetic algorithm to solve the inverse photo-elastic problem of damage reconstruction, i.e. to identify the location, size, and shape of a defect. By introducing a parameterized characterization of the damage information, the inverse photo-elastic problem is reduced to an optimization problem, and a relevant computational scheme was developed. The scheme iteratively searches for the solution to the corresponding direct photo-elastic problem until the simulated and measured (or target) reflection intensity spectra of the FBGs near the defect coincide within a prescribed error. Proof-of-concept validations of our approach were performed numerically and experimentally using both holed and cracked plate samples as typical cases of plane-stress problems. The damage identifiability was simulated by changing the deployment of the FBG sensors, including the total number of sensors and their distance to the defect. Both the numerical and experimental results demonstrate that our approach is effective and promising. It provides us with a photo-elastic method for developing a remote, automatic damage-imaging technique that substantially improves damage identification for structural health monitoring. (paper)

  8. Safety Concepts in Structural Glass Engineering : Towards an Integrated Approach

    NARCIS (Netherlands)

    Bos, F.P.

    2009-01-01

    This dissertation proposes the Integrated Approach to Structural Glass Safety, based on four clearly defined element safety properties, damage sensitivity, relative resistance, redundancy, and fracture mode. The Element Safety Diagram (ESD) is introduced to provide an easy-to-read graphical

  9. The Pluralistic Water Research Concept: A New Human-Water System Research Approach

    Directory of Open Access Journals (Sweden)

    Mariele Evers

    2017-11-01

    Full Text Available The use and management of water systems is influenced by a number of factors, such as economic growth, global change (e.g., urbanization, hydrological-climatic changes, politics, history and culture. Despite noteworthy efforts to develop integrative approaches to analyze water-related problems, human-water research remains a major challenge for scholars and decision makers due to the increasing complexity of human and water systems interactions. Although existing concepts try to integrate the social and water dimensions, they usually have a disciplinary starting point and perspective, which can represent an obstacle to true integration in human-water research. Hence, a pluralistic approach is required to better understand the interactions between human and water systems. This paper discusses prominent human-water concepts (Integrated Water Resources Management (IWRM, socio-hydrology, and political ecology/hydrosocial approach and presents a newly developed concept termed pluralistic water research (PWR. This is not only a pluralistic but also an integrative and interdisciplinary approach which aims to coherently and comprehensively integrate human-water dimensions. The different concepts are illustrated in a synopsis, and diverse framing of research questions are exemplified. The PWR concept integrates physical and social sciences, which enables a comprehensive analysis of human-water interactions and relations. This can lead to a better understanding of water-related issues and potentially sustainable trajectories.

  10. Role of damage tolerance and fatigue crack growth in the power generation industry

    International Nuclear Information System (INIS)

    Coffin, L.F.

    1988-01-01

    The problem of intergranular stress-corrosion cracking (IGSCC) in boiling water reactor (BWR) piping is discussed and the body of work undertaken in the author's laboratory to solve that problem is described. Particular attention is given to the development of electrical potential crack monitoring techniques and their application to surface crack growth, particularly under conditions approaching those found in service. The important role of water chemistry and its control is described in this context. The concept and description of sensors to monitor in situ the degree of damage containment from intergranular stress-corrosion cracking is then described, with reference to use in piping components and other types of monitoring. Finally, a concept for the life management of structures is described where damage processes are identified and monitored in situ using appropriate sensors to measure the damage rate continuously

  11. A comparison of two different approaches for mapping potential ozone damage to vegetation. A model study

    International Nuclear Information System (INIS)

    Simpson, D.; Ashmore, M.R.; Emberson, L.; Tuovinen, J.-P.

    2007-01-01

    Two very different types of approaches are currently in use today for indicating risk of ozone damage to vegetation in Europe. One approach is the so-called AOTX (accumulated exposure over threshold of X ppb) index, which is based upon ozone concentrations only. The second type of approach entails an estimate of the amount of ozone entering via the stomates of vegetation, the AFstY approach (accumulated stomatal flux over threshold of Y nmol m -2 s -1 ). The EMEP chemical transport model is used to map these different indicators of ozone damage across Europe, for two illustrative vegetation types, wheat and beech forests. The results show that exceedences of critical levels for either type of indicator are widespread, but that the indicators give very different spatial patterns across Europe. Model simulations for year 2020 scenarios suggest reductions in risks of vegetation damage whichever indicator is used, but suggest that AOT40 is much more sensitive to emission control than AFstY values. - Model calculations of AOT40 and AFstY show very different spatial variations in the risks of ozone damage to vegetation

  12. Key Concept Identification: A Comprehensive Analysis of Frequency and Topical Graph-Based Approaches

    Directory of Open Access Journals (Sweden)

    Muhammad Aman

    2018-05-01

    Full Text Available Automatic key concept extraction from text is the main challenging task in information extraction, information retrieval and digital libraries, ontology learning, and text analysis. The statistical frequency and topical graph-based ranking are the two kinds of potentially powerful and leading unsupervised approaches in this area, devised to address the problem. To utilize the potential of these approaches and improve key concept identification, a comprehensive performance analysis of these approaches on datasets from different domains is needed. The objective of the study presented in this paper is to perform a comprehensive empirical analysis of selected frequency and topical graph-based algorithms for key concept extraction on three different datasets, to identify the major sources of error in these approaches. For experimental analysis, we have selected TF-IDF, KP-Miner and TopicRank. Three major sources of error, i.e., frequency errors, syntactical errors and semantical errors, and the factors that contribute to these errors are identified. Analysis of the results reveals that performance of the selected approaches is significantly degraded by these errors. These findings can help us develop an intelligent solution for key concept extraction in the future.

  13. Relational Analysis of College Chemistry-Major Students' Conceptions of and Approaches to Learning Chemistry

    Science.gov (United States)

    Li, Wei-Ting; Liang, Jyh-Chong; Tsai, Chin-Chung

    2013-01-01

    The purpose of this research was to examine the relationships between conceptions of learning and approaches to learning in chemistry. Two questionnaires, conceptions of learning chemistry (COLC) and approaches to learning chemistry (ALC), were developed to identify 369 college chemistry-major students' (220 males and 149 females) conceptions of…

  14. Military Robotics and Collateral Damage

    National Research Council Canada - National Science Library

    Kott, Robert Douglass ;Alexander

    2004-01-01

    .... Such concepts raise important questions in terms of their impact on collateral damage. In a broader context, western warfare in general places a continuously growing emphasis on issues of collateral damage...

  15. Micromechanical modeling and inverse identification of damage using cohesive approaches

    International Nuclear Information System (INIS)

    Blal, Nawfal

    2013-01-01

    In this study a micromechanical model is proposed for a collection of cohesive zone models embedded between two each elements of a standard cohesive-volumetric finite element method. An equivalent 'matrix-inclusions' composite is proposed as a representation of the cohesive-volumetric discretization. The overall behaviour is obtained using homogenization approaches (Hashin Shtrikman scheme and the P. Ponte Castaneda approach). The derived model deals with elastic, brittle and ductile materials. It is available whatever the triaxiality loading rate and the shape of the cohesive law, and leads to direct relationships between the overall material properties and the local cohesive parameters and the mesh density. First, rigorous bounds on the normal and tangential cohesive stiffnesses are obtained leading to a suitable control of the inherent artificial elastic loss induced by intrinsic cohesive models. Second, theoretical criteria on damageable and ductile cohesive parameters are established (cohesive peak stress, critical separation, cohesive failure energy,... ). These criteria allow a practical calibration of the cohesive zone parameters as function of the overall material properties and the mesh length. The main interest of such calibration is its promising capacity to lead to a mesh-insensitive overall response in surface damage. (author) [fr

  16. Gamma non-ionizing energy loss: Comparison with the damage factor in silicon devices

    Science.gov (United States)

    El Allam, E.; Inguimbert, C.; Meulenberg, A.; Jorio, A.; Zorkani, I.

    2018-03-01

    The concept of non-ionizing energy loss (NIEL) has been demonstrated to be a successful approach to describe the displacement damage effects in silicon materials and devices. However, some discrepancies exist in the literature between experimental damage factors and theoretical NIELs. 60Co gamma rays having a low NIEL are an interesting particle source that can be used to validate the NIEL scaling approach. This paper presents different 60Co gamma ray NIEL values for silicon targets. They are compared with the radiation-induced increase in the thermal generation rate of carriers per unit fluence. The differences between the different models, including one using molecular dynamics, are discussed.

  17. An immunochemical approach to the study of DNA damage and repair

    International Nuclear Information System (INIS)

    Wallace, S.S.; Erlanger, B.F.

    1992-05-01

    The overall objective of this project has been to develop immunochemical methods to quantitate unique DNA base damages in order to facilitate studies on radiation-induced damage production and repair. Specifically, we have been using antibodies raised to damaged bases to quantitate unique lesions in model systems in order to evaluate their potential biological consequences. Our approach has been to synthesize modified nucleotides or nucleosides, conjugate them to protein carriers, and use the conjugates as immunogens in rabbits or to prepare monoclonal antibodies. We have been studying damages that are stable radiolysis products found in X-irradiated DNA and thus of potential biological consequence. Our aim is to build an in vitro and in vivo data base on the interactions between model DNA lesions and such cellular enzymes as DNA polymerases and repair endonucleases. Initial studies have focused on pyrimidine ring saturation products (thymine glycol.and dihydrothymine), products resulting from ring fragmentation or base loss (urea, Β-ureidoisobutyric acid, abasic sites), 7-hydro-8-oxopurines, and more recently, cytosine radiolysis products. These modified bases serve as useful models for examining the potential lethal and/or mutagenic (carcinogenic) effects of the products of DNA radiolysis

  18. A LATIN-based model reduction approach for the simulation of cycling damage

    Science.gov (United States)

    Bhattacharyya, Mainak; Fau, Amelie; Nackenhorst, Udo; Néron, David; Ladevèze, Pierre

    2017-11-01

    The objective of this article is to introduce a new method including model order reduction for the life prediction of structures subjected to cycling damage. Contrary to classical incremental schemes for damage computation, a non-incremental technique, the LATIN method, is used herein as a solution framework. This approach allows to introduce a PGD model reduction technique which leads to a drastic reduction of the computational cost. The proposed framework is exemplified for structures subjected to cyclic loading, where damage is considered to be isotropic and micro-defect closure effects are taken into account. A difficulty herein for the use of the LATIN method comes from the state laws which can not be transformed into linear relations through an internal variable transformation. A specific treatment of this issue is introduced in this work.

  19. Injection technologies for the repair of damaged concrete structures

    CERN Document Server

    Panasyuk, V V; Sylovanyuk, V P

    2014-01-01

    This book analyzes the most important achievements in science and engineering practice concerning operational factors that cause damage to concrete and reinforced concrete structures. It includes methods for assessing their strength and service life, especially those that are based on modern concepts of the fracture mechanics of materials. It also includes basic approaches to the prediction of the remaining service life for long-term operational structures. Much attention is paid to injection technologies for restoring the serviceability of damaged concrete and reinforced concrete structures. In particular, technologies for remedying holes, cracks, corrosion damages etc. The books contains sample cases in which the above technologies have been used to restore structural integrity and extend the reliable service life of concrete and reinforced concrete constructions, especially NPPs, underground railways, bridges, seaports and historical relics.

  20. A Coupled Plastic Damage Model for Concrete considering the Effect of Damage on Plastic Flow

    OpenAIRE

    Zhou, Feng; Cheng, Guangxu

    2015-01-01

    A coupled plastic damage model with two damage scalars is proposed to describe the nonlinear features of concrete. The constitutive formulations are developed by assuming that damage can be represented effectively in the material compliance tensor. Damage evolution law and plastic damage coupling are described using the framework of irreversible thermodynamics. The plasticity part is developed without using the effective stress concept. A plastic yield function based on the true stress is ado...

  1. A better approach to the MDNBR concept

    International Nuclear Information System (INIS)

    Crecy, F. de.

    1993-01-01

    This paper recalls the statistical origins of the MDNBR concept and Owen's coefficients, as used in CHF studies. The way in which they are currently used may be incorrect and we shall present a better approach, in which the lower tolerance interval limit depends on parameters. Use with least-square regressions and smoothing splines is explained. We also include an example, based on a CHF EPRI test, from the Columbia University data bank. (author). 1 fig., 6 refs

  2. Children's Conceptions of Mental Illness: A Naive Theory Approach

    Science.gov (United States)

    Fox, Claudine; Buchanan-Barrow, Eithne; Barrett, Martyn

    2010-01-01

    This paper reports two studies that investigated children's conceptions of mental illness using a naive theory approach, drawing upon a conceptual framework for analysing illness representations which distinguishes between the identity, causes, consequences, curability, and timeline of an illness. The studies utilized semi-structured interviewing…

  3. Early recognition of damage and course of damage on metal components

    International Nuclear Information System (INIS)

    1992-01-01

    In 1985, the German Research Association set up the programme 'Early recognition of damage and course of damage on metal components'. The concept worked out by a programme committee provided that scientifically secured bases for the understanding of the occurrence of damage, the prevention of damage, affecting damage, and the mechanism triggering damage, or cumulation of damage should be obtained. 36 individual projects costing 14 million DM were supported in the course of 6 years. The task of a test group was to find these projects from a far larger number of applications which promised an increase in knowledge in the sense of the target of the programme. For the final colloquium, the test group chose those contributions which had not previously been published to the wider technical public. (orig.) [de

  4. New concept of damage evaluation method for core internal materials considering radiation induced stress relaxation (1). Experiments and modeling of radiation effects

    International Nuclear Information System (INIS)

    Miwa, Yukio; Kondo, Keietsu; Okubo, Nariaki; Kaji, Yoshiyuki; Tsukada, Takashi

    2009-01-01

    In order to build the new concept of material damage evaluation method, synergistic effect of radiation and residual stress on material degradation was estimated experimentally, and the effect of radiation induced stress relaxation on retardation of material degradation was observed. (author)

  5. Capturing changes in flood risk with Bayesian approaches for flood damage assessment

    Science.gov (United States)

    Vogel, Kristin; Schröter, Kai; Kreibich, Heidi; Thieken, Annegret; Müller, Meike; Sieg, Tobias; Laudan, Jonas; Kienzler, Sarah; Weise, Laura; Merz, Bruno; Scherbaum, Frank

    2016-04-01

    Flood risk is a function of hazard as well as of exposure and vulnerability. All three components are under change over space and time and have to be considered for reliable damage estimations and risk analyses, since this is the basis for an efficient, adaptable risk management. Hitherto, models for estimating flood damage are comparatively simple and cannot sufficiently account for changing conditions. The Bayesian network approach allows for a multivariate modeling of complex systems without relying on expert knowledge about physical constraints. In a Bayesian network each model component is considered to be a random variable. The way of interactions between those variables can be learned from observations or be defined by expert knowledge. Even a combination of both is possible. Moreover, the probabilistic framework captures uncertainties related to the prediction and provides a probability distribution for the damage instead of a point estimate. The graphical representation of Bayesian networks helps to study the change of probabilities for changing circumstances and may thus simplify the communication between scientists and public authorities. In the framework of the DFG-Research Training Group "NatRiskChange" we aim to develop Bayesian networks for flood damage and vulnerability assessments of residential buildings and companies under changing conditions. A Bayesian network learned from data, collected over the last 15 years in flooded regions in the Elbe and Danube catchments (Germany), reveals the impact of many variables like building characteristics, precaution and warning situation on flood damage to residential buildings. While the handling of incomplete and hybrid (discrete mixed with continuous) data are the most challenging issues in the study on residential buildings, a similar study, that focuses on the vulnerability of small to medium sized companies, bears new challenges. Relying on a much smaller data set for the determination of the model

  6. [Positive deviance: concept analysis using the evolutionary approach of Rodgers].

    Science.gov (United States)

    Létourneau, Josiane; Alderson, Marie; Caux, Chantal; Richard, Lucie

    2013-06-01

    Positive deviance is a relatively new concept in healthcare. Since 2006, it has been applied to infection control in order to increase the awareness to good hand hygiene practices. This article focus on presenting analytical results of this concept using the evolutionary approach of Rodgers based on the philosophical postulate that concepts are dynamical and changing with time. For doing so, a census of the writings in nursing, medicine and psychology was carried out. By going through the CINAHL, Medline and PsyclNFO databases using positive deviance as a keyword for the time period: 1975 to May 2012, and in accordance with the method of Rodgers, ninety articles were retained (30 per discipline). The analysis enables one to notice that positive deviance described as an individual characteristic at first, is now used as a behavioral changing approach in nursing and medicine as well. At the end of the analysis and apart from this article, positive deviance will be used in order to study the practice of nurses that adheres to hand hygiene despite limiting constraints within hospital. We will then be able to continue the development of this concept in order to bring it, as Rodgers recommends, beyond the analysis. It would then be an important contribution to good nursing practices in the field of infection control and prevention.

  7. A Green's Function Approach to Simulate DNA Damage by the Indirect Effect

    Science.gov (United States)

    Plante, Ianik; Cicinotta, Francis A.

    2013-01-01

    The DNA damage is of fundamental importance in the understanding of the effects of ionizing radiation. DNA is damaged by the direct effect of radiation (e.g. direct ionization) and by indirect effect (e.g. damage by.OH radicals created by the radiolysis of water). Despite years of research, many questions on the DNA damage by ionizing radiation remains. In the recent years, the Green's functions of the diffusion equation (GFDE) have been used extensively in biochemistry [1], notably to simulate biochemical networks in time and space [2]. In our future work on DNA damage, we wish to use an approach based on the GFDE to refine existing models on the indirect effect of ionizing radiation on DNA. To do so, we will use the code RITRACKS [3] developed at the NASA Johnson Space Center to simulate the radiation track structure and calculate the position of radiolytic species after irradiation. We have also recently developed an efficient Monte-Carlo sampling algorithm for the GFDE of reversible reactions with an intermediate state [4], which can be modified and adapted to simulate DNA damage by free radicals. To do so, we will use the known reaction rate constants between radicals (OH, eaq, H,...) and the DNA bases, sugars and phosphates and use the sampling algorithms to simulate the diffusion of free radicals and chemical reactions with DNA. These techniques should help the understanding of the contribution of the indirect effect in the formation of DNA damage and double-strand breaks.

  8. Alternative approaches to electronic damage by ion-beam irradiation: Exciton models

    Energy Technology Data Exchange (ETDEWEB)

    Agullo-Lopez, F.; Munoz-Martin, A.; Zucchiatti, A. [Centro de Micro-Analisis de Materiales, Universidad Autonoma de Madrid, 28049, Madrid (Spain); Climent-Font, A. [Centro de Micro-Analisis de Materiales, Universidad Autonoma de Madrid, 28049, Madrid (Spain); Departamento de Fisica Aplicada, Universidad Autonoma de Madrid, 28049, Madrid (Spain)

    2016-11-15

    The paper briefly describes the main features of the damage produced by swift heavy ion (SHI) irradiation. After a short revision of the widely used thermal spike concept, it focuses on cumulative mechanisms of track formation which are alternative to those based on lattice melting (thermal spike models). These cumulative mechanisms rely on the production of point defects around the ion trajectory, and their accumulation up to a final lattice collapse or amorphization. As to the formation of point defects, the paper considers those mechanisms relying on direct local conversion of the excitation energy into atomic displacements (exciton models). A particular attention is given to processes based on the non-radiative recombination of excitons that have become self-trapped as a consequence of a strong electron-phonon interaction (STEs). These mechanisms, although operative under purely ionizing radiation in some dielectric materials, have been rarely invoked, so far, to discuss SHI damage. They are discussed in this paper together with relevant examples to materials such as Cu{sub 3}N, alkali halides, SiO{sub 2}, and LiNbO{sub 3}. (copyright 2016 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  9. An Approach to Formalizing Ontology Driven Semantic Integration: Concepts, Dimensions and Framework

    Science.gov (United States)

    Gao, Wenlong

    2012-01-01

    The ontology approach has been accepted as a very promising approach to semantic integration today. However, because of the diversity of focuses and its various connections to other research domains, the core concepts, theoretical and technical approaches, and research areas of this domain still remain unclear. Such ambiguity makes it difficult to…

  10. Modeling the damage of welded steel, using the GTN model

    Directory of Open Access Journals (Sweden)

    El-Ahmar Kadi

    2014-11-01

    Full Text Available The aim of our work is the modeling of the damage in the weld metal according to the finite element method and the concepts of fracture mechanics based on local approaches using the code ABAQUS calculates. The use of the Gurson-Tvergaard-Needleman model axisymmetric specimens AE type to three different zones (Base metal, molten metal and heat affected Zone with four levels of triaxiality (AE2, AE4, AE10 and AE80, we have used to model the behavior of damage to welded steel, which is described as being due to the growth and coalescence of cavities with high rates of triaxiality

  11. Creep-fatigue life prediction for different heats of Type 304 stainless steel by linear-damage rule, strain-range partitioning method, and damage-rate approach

    International Nuclear Information System (INIS)

    Maiya, P.S.

    1978-07-01

    The creep-fatigue life results for five different heats of Type 304 stainless steel at 593 0 C (1100 0 F), generated under push-pull conditions in the axial strain-control mode, are presented. The life predictions for the various heats based on the linear-damage rule, strain-range partitioning method, and damage-rate approach are discussed. The appropriate material properties required for computation of fatigue life are also included

  12. Mathematical Modeling in Mathematics Education: Basic Concepts and Approaches

    Science.gov (United States)

    Erbas, Ayhan Kürsat; Kertil, Mahmut; Çetinkaya, Bülent; Çakiroglu, Erdinç; Alacaci, Cengiz; Bas, Sinem

    2014-01-01

    Mathematical modeling and its role in mathematics education have been receiving increasing attention in Turkey, as in many other countries. The growing body of literature on this topic reveals a variety of approaches to mathematical modeling and related concepts, along with differing perspectives on the use of mathematical modeling in teaching and…

  13. A Voting TOPSIS Approach for Determining the Priorities of Areas Damaged in Disasters

    Directory of Open Access Journals (Sweden)

    Yanjin He

    2018-05-01

    Full Text Available In this paper, we investigate the priority determination problem for areas that have been damaged during disasters. Relief distribution should be planned while considering the priorities of the damaged areas. To determine the priorities of the damaged areas, we first define four criteria and then propose a voting TOPSIS (technique for order of preference by similarity to ideal solution that utilizes the fuzzy pair-wise comparison, data envelopment analysis, and TOPSIS. Since the voting TOPSIS is based on the voting results of multiple experts, it can be applied to urgent situations quickly, regardless of the consistency of comparison, the number of alternatives, and the number of participating experts. The proposed approach is validated using a real-world case, and this case analysis shows that the voting TOPSIS is viable.

  14. A Binary-Encounter-Bethe Approach to Simulate DNA Damage by the Direct Effect

    Science.gov (United States)

    Plante, Ianik; Cucinotta, Francis A.

    2013-01-01

    The DNA damage is of crucial importance in the understanding of the effects of ionizing radiation. The main mechanisms of DNA damage are by the direct effect of radiation (e.g. direct ionization) and by indirect effect (e.g. damage by.OH radicals created by the radiolysis of water). Despite years of research in this area, many questions on the formation of DNA damage remains. To refine existing DNA damage models, an approach based on the Binary-Encounter-Bethe (BEB) model was developed[1]. This model calculates differential cross sections for ionization of the molecular orbitals of the DNA bases, sugars and phosphates using the electron binding energy, the mean kinetic energy and the occupancy number of the orbital. This cross section has an analytic form which is quite convenient to use and allows the sampling of the energy loss occurring during an ionization event. To simulate the radiation track structure, the code RITRACKS developed at the NASA Johnson Space Center is used[2]. This code calculates all the energy deposition events and the formation of the radiolytic species by the ion and the secondary electrons as well. We have also developed a technique to use the integrated BEB cross section for the bases, sugar and phosphates in the radiation transport code RITRACKS. These techniques should allow the simulation of DNA damage by ionizing radiation, and understanding of the formation of double-strand breaks caused by clustered damage in different conditions.

  15. Damage scenarios and an onboard support system for damaged ships

    Directory of Open Access Journals (Sweden)

    Choi Jin

    2014-06-01

    Full Text Available Although a safety assessment of damaged ships, which considers environmental conditions such as waves and wind, is important in both the design and operation phases of ships, in Korea, rules or guidelines to conduct such assessments are not yet developed. However, NATO and European maritime societies have developed guidelines for a safety assessment. Therefore, it is required to develop rules or guidelines for safety assessments such as the Naval Ship Code (NSC of NATO. Before the safety assessment of a damaged ship can be performed, the available damage scenarios must be developed and the safety assessment criteria must be established. In this paper, the parameters related to damage by accidents are identified and categorized when developing damage scenarios. The need for damage safety assessment criteria is discussed, and an example is presented. In addition, a concept and specifications for the DB-based supporting system, which is used in the operation phases, are proposed.

  16. New concepts for controlled fusion reactor blanket design

    International Nuclear Information System (INIS)

    Conn, R.W.; Kulcinski, G.L.; Avci, H.; El-Maghrabi, M.

    1975-01-01

    Several new concepts for fusion reactor blanket design based on the idea of shifting, or tailoring, the neutron spectrum incident on the first structural wall are presented. The spectral shifter is a nonstructural element which can be made of graphite, silicon carbide, or three dimensionally woven carbon fibers (and containing other materials as appropriate) placed between the neutron source and the first structural wall. The softened neutron spectrum incident on the structural components leads to lower gas production and atom displacement rates than in more standard fusion blanket designs. In turn, this results in longer anticipated lifetimes for the structural materials and can significantly reduce radioactivity and afterheat levels. In addition, the neutron spectrum in the first structural wall can be made to approach the flux shape in fast breeder reactors. Such spectral softening means that existing radiation facilities may be more profitably used to provide relevant materials radiation damage data for the structural materials in these fusion blanket designs. This general class of blanket concepts are referred to as internal spectral shifter and energy converter, or ISSEC concepts. These specific design concepts fall into three main categories: ISSEC/EB concepts based on utilizing existing designs which breed tritium behind the first structural wall; ISSEC/IB concepts based on breeding tritium inside the first vacuum wall; and ISSEC/Bu concepts based on using boron, carbon, and perhaps, beryllium to obtain an energy multiplier and converter design that does not attempt to breed tritium or utilize lithium. The detailed analyses relate specifically to the nuclear performance of ISSEC systems and to a discussion of materials radiation damage problems in the structural material.(U.S.)

  17. Effectiveness of Instruction Based on the Constructivist Approach on Understanding Chemical Equilibrium Concepts

    Science.gov (United States)

    Akkus, Huseyin; Kadayifci, Hakki; Atasoy, Basri; Geban, Omer

    2003-01-01

    The purpose of this study was to identify misconceptions concerning chemical equilibrium concepts and to investigate the effectiveness of instruction based on the constructivist approach over traditional instruction on 10th grade students' understanding of chemical equilibrium concepts. The subjects of this study consisted of 71 10th grade…

  18. A symmetry measure for damage detection with mode shapes

    Science.gov (United States)

    Chen, Justin G.; Büyüköztürk, Oral

    2017-11-01

    This paper introduces a feature for detecting damage or changes in structures, the continuous symmetry measure, which can quantify the amount of a particular rotational, mirror, or translational symmetry in a mode shape of a structure. Many structures in the built environment have geometries that are either symmetric or almost symmetric, however damage typically occurs in a local manner causing asymmetric changes in the structure's geometry or material properties, and alters its mode shapes. The continuous symmetry measure can quantify these changes in symmetry as a novel indicator of damage for data-based structural health monitoring approaches. This paper describes the concept as a basis for detecting changes in mode shapes and detecting structural damage. Application of the method is demonstrated in various structures with different symmetrical properties: a pipe cross-section with a finite element model and experimental study, the NASA 8-bay truss model, and the simulated IASC-ASCE structural health monitoring benchmark structure. The applicability and limitations of the feature in applying it to structures of varying geometries is discussed.

  19. Concept-based query language approach to enterprise information systems

    Science.gov (United States)

    Niemi, Timo; Junkkari, Marko; Järvelin, Kalervo

    2014-01-01

    In enterprise information systems (EISs) it is necessary to model, integrate and compute very diverse data. In advanced EISs the stored data often are based both on structured (e.g. relational) and semi-structured (e.g. XML) data models. In addition, the ad hoc information needs of end-users may require the manipulation of data-oriented (structural), behavioural and deductive aspects of data. Contemporary languages capable of treating this kind of diversity suit only persons with good programming skills. In this paper we present a concept-oriented query language approach to manipulate this diversity so that the programming skill requirements are considerably reduced. In our query language, the features which need technical knowledge are hidden in application-specific concepts and structures. Therefore, users need not be aware of the underlying technology. Application-specific concepts and structures are represented by the modelling primitives of the extended RDOOM (relational deductive object-oriented modelling) which contains primitives for all crucial real world relationships (is-a relationship, part-of relationship, association), XML documents and views. Our query language also supports intensional and extensional-intensional queries, in addition to conventional extensional queries. In its query formulation, the end-user combines available application-specific concepts and structures through shared variables.

  20. Analysis of the concept of nursing educational technology applied to the patient

    Directory of Open Access Journals (Sweden)

    Aline Cruz Esmeraldo Áfio

    2014-04-01

    Full Text Available It is aimed at analyzing the concept of educational technology, produced by nursing, applied to the patient. Rodgers´ Evolutionary Method of Concept Analysis was used, identifying background, attributes and consequential damages. 13 articles were selected for analysis in which the background was identified: knowledge deficiency, shortage of nursing professionals' time, to optimize nursing work, the need to achieve the goals of the patients. Attributes: tool, strategy, innovative approach, pedagogical approach, mediator of knowledge, creative way to encourage the acquisition of skills, health production instrument. Consequences: to improve the quality of life, encouraging healthy behavior, empowerment, reflection and link. It emphasizes the importance of educational technologies for the care in nursing, to boost health education activities.

  1. Novel Combinatory Approaches to Repair Visual System after Optic Nerve Damage

    Science.gov (United States)

    2014-09-01

    Novel Combinatory Approaches to Repair Visual System After Optic Nerve Damage 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6...biological functions such as metabolism, growth, cell cycle, and survival ( Cardone et al., 1998; Diehl, Cheng, Roussel, & Sherr, 1998; Hers, Vincent...of injured adult sensory neurons. The Journal of Neuroscience, 21, 7161–7170. Cardone , M. H., Roy, N., Stennicke, H. R., Salvesen, G. S., Franke, T. F

  2. Damage and fatigue in cross-linked rubbers

    Science.gov (United States)

    Melnikov, Alexei

    Damage and fatigue of elastomers have not been fundamentally understood because of the complex nature of these materials. All currently existing models are completely phenomenological. Therefore two problems have been investigated in this research to address those fundamental issues. The first problem was creating an innovative concept with a mathematical modeling, which would be able to describe the damage using molecular characteristics of elastomers. The second problem is developing new approaches to study fatigue, and especially impact fatigue of elastomers. The following results have been obtained in this research. A theoretical model of damage has been developed which involves the basic molecular characteristics of cross-linked elastomers and takes into account the effects of viscoelasticity and stress-induced crystallization. This model was found very reliable and successful in description of numerous quasi-static simple extension experiments for monotonous and repeating loadings. It also roughly predicts in molecular terms the failure of elastomers with various degrees of cross-linking. Quasi-impact fatigue tests with different geometry of an indenter have also been performed. Some microscopic features of rubber damage have been investigated using optical microscopy and SEM. In particular, the accumulation of a completely de-vulcanized, liquid-like substance was observed under intense, multi-cycle impacts. All the findings discovered in quasi-impact experiments are consistent with the damage model predictions.

  3. Mobile augmented reality in support of building damage and safety assessment

    Science.gov (United States)

    Kim, W.; Kerle, N.; Gerke, M.

    2016-02-01

    Rapid and accurate assessment of the state of buildings in the aftermath of a disaster event is critical for an effective and timely response. For rapid damage assessment of buildings, the utility of remote sensing (RS) technology has been widely researched, with focus on a range of platforms and sensors. However, RS-based approaches still have limitations to assess structural integrity and the specific damage status of individual buildings. Structural integrity refers to the ability of a building to hold the entire structure. Consequently, ground-based assessment conducted by structural engineers and first responders is still required. This paper demonstrates the concept of mobile augmented reality (mAR) to improve performance of building damage and safety assessment in situ. Mobile AR provides a means to superimpose various types of reference or pre-disaster information (virtual data) on actual post-disaster building data (real buildings). To adopt mobile AR, this study defines a conceptual framework based on the level of complexity (LOC). The framework consists of four LOCs, and for each of these, the data types, required processing steps, AR implementation and use for damage assessment are described. Based on this conceptualization we demonstrate prototypes of mAR for both indoor and outdoor purposes. Finally, we conduct a user evaluation of the prototypes to validate the mAR approach for building damage and safety assessment.

  4. Damage to the superior gluteal nerve after the Hardinge approach to the hip.

    LENUS (Irish Health Repository)

    Ramesh, M

    2012-02-03

    We studied prospectively 81 consecutive patients undergoing hip surgery using the Hardinge (1982) approach. The abductor muscles of the hip in these patients were assessed electrophysiologically and clinically by the modified Trendelenburg test. Power was measured using a force plate. We performed assessment at two weeks, and at three and nine months after operation. At two weeks we found that 19 patients (23%) showed evidence of damage to the superior gluteal nerve. By three months, five of these had recovered. The nine patients with complete denervation at three months showed no signs of recovery when reassessed at nine months. Persistent damage to the nerve was associated with a positive Trendelenburg test.

  5. Future Naval Concepts -- Crew Reductions through Improved Damage Control Communications (FNC-CRIDCC)

    National Research Council Canada - National Science Library

    Street, Thomas T; Williams, Frederick W; Cooper, L. S; Halloway, III, Kenneth E; Rininger, Michael; Miller, Charles; Shirley, Bradley; Genovese, Samuel; Showalter, David; Zak, Stephen

    2007-01-01

    The object of the Damage Control (DC) Triad program was to develop a Damage Control Communications system, which would be damage tolerant and remain operable in casualty situations where DC communications are vital...

  6. Evolutionary Algorithms Approach to the Solution of Damage Detection Problems

    Science.gov (United States)

    Salazar Pinto, Pedro Yoajim; Begambre, Oscar

    2010-09-01

    In this work is proposed a new Self-Configured Hybrid Algorithm by combining the Particle Swarm Optimization (PSO) and a Genetic Algorithm (GA). The aim of the proposed strategy is to increase the stability and accuracy of the search. The central idea is the concept of Guide Particle, this particle (the best PSO global in each generation) transmits its information to a particle of the following PSO generation, which is controlled by the GA. Thus, the proposed hybrid has an elitism feature that improves its performance and guarantees the convergence of the procedure. In different test carried out in benchmark functions, reported in the international literature, a better performance in stability and accuracy was observed; therefore the new algorithm was used to identify damage in a simple supported beam using modal data. Finally, it is worth noting that the algorithm is independent of the initial definition of heuristic parameters.

  7. The concept of individual approach in sport

    Directory of Open Access Journals (Sweden)

    Zh.L. Kozina

    2015-03-01

    Full Text Available Purpose : prove the concept of individual approach to sports training. Develop a common scheme ways individualization process of training athletes. Material: the study involved 149 athletes: 38 volleyball players and 111 players. Was carried out comprehensive testing athletes for 33 pedagogical, psycho-physiological, biochemical parameters. Also conducted an analysis of indicators of competitive activity. Results : we propose the following areas of the individualization process of preparation of athletes: 1 - systematization of mathematical indicators of preparedness and condition of the athlete in a single point in time; 2 - regression analysis of the dynamics of individual game performance athletes; 3 - the use of universal methods of individualization of various aspects of the training process. It is established that the individual characteristics of players in basketball and volleyball are connected not only with the anthropometric data, but also depend on the physiological and psychophysiological indicators. In this aspect there is provided use of cluster and factor analysis for the construction of individual training programs for players. It was found that the dynamics of the gaming performance is described by quadratic, cubic and sinusoidal functions. In the case of sinusoidal oscillation period of regression models in girls is 25-30 days, 31-38 days in boys. This allows to determine the most preferred times of increasing and reducing the efficiency of competitive. Conclusions : the concept of individual approach in sport involves the separation of a wide range of indicators leading factors in the individual structure of athletes, in the analysis and prediction of individual dynamics of competitive performance, to develop universal methods of individualization with the activation of awareness of various aspects of the training process.

  8. FAA/NASA International Symposium on Advanced Structural Integrity Methods for Airframe Durability and Damage Tolerance

    Energy Technology Data Exchange (ETDEWEB)

    Harris, C.E.

    1994-09-01

    International technical experts in durability and damage tolerance of metallic airframe structures were assembled to present and discuss recent research findings and the development of advanced design and analysis methods, structural concepts, and advanced materials. The symposium focused on the dissemination of new knowledge and the peer-review of progress on the development of advanced methodologies. Papers were presented on: structural concepts for enhanced durability, damage tolerance, and maintainability; new metallic alloys and processing technology; fatigue crack initiation and small crack effects; fatigue crack growth models; fracture mechanics failure, criteria for ductile materials; structural mechanics methodology for residual strength and life prediction; development of flight load spectra for design and testing; and advanced approaches to resist corrosion and environmentally assisted fatigue. Separate abstracts have been indexed for articles from this report.

  9. Synthesis of industrial applications of local approach to fracture models

    International Nuclear Information System (INIS)

    Eripret, C.

    1993-03-01

    This report gathers different applications of local approach to fracture models to various industrial configurations, such as nuclear pressure vessel steel, cast duplex stainless steels, or primary circuit welds such as bimetallic welds. As soon as models are developed on the basis of microstructural observations, damage mechanisms analyses, and fracture process, the local approach to fracture proves to solve problems where classical fracture mechanics concepts fail. Therefore, local approach appears to be a powerful tool, which completes the standard fracture criteria used in nuclear industry by exhibiting where and why those classical concepts become unvalid. (author). 1 tab., 18 figs., 25 refs

  10. Children’s conceptions of mental illness: A naïve theory approach.

    OpenAIRE

    Fox, C; Buchanan-Barrow, E; Barrett, MD

    2010-01-01

    This paper reports two studies that investigated children's conceptions of mental illness using a naïve theory approach, drawing upon a conceptual framework for analysing illness representations which distinguishes between the identity, causes, consequences, curability, and timeline of an illness. The studies utilized semi-structured interviewing and card selection tasks to assess 6- to 11-year-old children's conceptions of the causes and consequences (Study 1) and the curability and timeline...

  11. PROPOSAL OF ACTIVITY FOR APPROACH TO CONCEPT TEACHING IN THE MIDDLE OF ENTROPY

    OpenAIRE

    Monteiro, Marco Aurélio Alvarenga; ITA - São Paulo; Monteiro, Isabel Cristina de Castro; UNESP/Guaratinguetá - SP; Gaspar, Alberto; UNESP/Guaratinguetá-SP; Germano, Jóse Silvério Edmundo; ITA-SP

    2009-01-01

    To teach concepts of Thermodynamics for students of high school, primarily those relating to the Second Law, is not trivial task, in view of the rare activities proposed to approach these concepts in the classroom. The aim of this article is to offer a proposal for construction activity from simple, inexpensive and easy to use in the classroom so that it can be used by teachers of Physical of the high school aiming teach concepts relating to the Second Law of Thermodynamics. La enseñanza d...

  12. PROPOSAL OF ACTIVITY FOR APPROACH TO CONCEPT TEACHING IN THE MIDDLE OF ENTROPY

    Directory of Open Access Journals (Sweden)

    Marco Aurélio Alvarenga Monteiro

    2009-08-01

    Full Text Available To teach concepts of Thermodynamics for students of high school, primarily those relating to the Second Law, is not trivial task, in view of the rare activities proposed to approach these concepts in the classroom. The aim of this article is to offer a proposal for construction activity from simple, inexpensive and easy to use in the classroom so that it can be used by teachers of Physical of the high school aiming teach concepts relating to the Second Law of Thermodynamics.

  13. Neuroprotection and secondary damage following spinal cord injury: concepts and methods.

    Science.gov (United States)

    Hilton, Brett J; Moulson, Aaron J; Tetzlaff, Wolfram

    2017-06-23

    Neuroprotection refers to the attenuation of pathophysiological processes triggered by acute injury to minimize secondary damage. The development of neuroprotective treatments represents a major goal in the field of spinal cord injury (SCI) research. In this review, we discuss the strengths and limitations of the methodologies employed to assess secondary damage and neuroprotection in preclinical models of traumatic SCI. We also discuss modelling issues and how new tools might be exploited to study secondary damage and neuroprotection. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  14. Personal Constructions of Biological Concepts – The Repertory Grid Approach

    Directory of Open Access Journals (Sweden)

    Thomas J. J. McCloughlin

    2017-03-01

    Full Text Available This work discusses repertory grid analysis as a tool for investigating the structures of students’ representations of biological concepts. Repertory grid analysis provides the researcher with a variety of techniques that are not associated with standard methods of concept mapping for investigating conceptual structures. It can provide valuable insights into the learning process, and can be used as a diagnostic tool in identifying problems that students have in understanding biological concepts. The biological concepts examined in this work are ‘natural kinds’: a technical class of concepts which ‘appear’ to have invisible ‘essences’ meaning carrying more perceptual weight than being perceptually similar. Because children give more weight to natural-kind membership when reasoning about traits, it would seem pertinent to apply such knowledge to deep-level research into how children reason in biology. The concept of natural kinds has a particular resonance with biology since biological kinds hold the distinction of being almost all natural kinds, such as when the same ‘stuff or thing’ takes many different forms. We have conducted a range of studies using a diversity of biological natural kinds, but in this paper, we wish to explore some of the theoretical underpinnings in more detail. To afford this exploration, we outline one case-study in a small group of secondary school students exploring the concept of ‘equine’ – that is, what is an equine? Five positive examples were chosen to engaged with by the students and one ‘outlier’ with which to compare the construction process. Recommendations are offered in applying this approach to biological education research.

  15. Behaviour and damage of aged austenitic-ferritic steels: a micro-mechanical approach

    International Nuclear Information System (INIS)

    Bugat, St.

    2000-12-01

    The austenitic-ferritic steels are used in the PWR primary cooling system. At the running temperature (320 C), they are submitted to a slow aging, which leads to the embrittlement of the ferritic phase. This embrittlement leads to a decrease of the mechanical properties, in particular of the crack resistance of the austenitic-ferritic steels. The damage and rupture of the austenitic-ferritic steels have been approached at the ENSMP by the works of P. Joly (1992) and of L. Devilliers-Guerville (1998). These works have allowed to reveal a damage heterogeneity which induces a strong dispersion on the ductilities and the toughnesses as well as on the scale effects. Modeling including the damage growth kinetics measured experimentally, have allowed to verify these effects. Nevertheless, they do not consider the two-phase character of the material and do not include a physical model of the cleavage cracks growth which appear in the embrittled ferrite. In this study, is proposed a description of the material allowing to treat these aspects while authorizing the structure calculation. In a first part, the material is studied. The use of the ESBD allows to specify the complex morphology of these steels and crystal orientation relations between the two phases. Moreover, it is shown that the two phases keep the same crystal orientation in the zones, called bicrystals, whose size varies between 500 μm and 1 mm. The study of the sliding lines, coupled to the ESBD, allows to specify too the deformation modes of the two phases. At last, tensile and tensile-compression tests at various deformation range are carried out to characterize the macroscopic mechanical behaviour of these materials. Then, a micro-mechanical modeling of the material behaviour is proposed. This one takes into account the three scales identified at the preceding chapter. The first scale, corresponding to the laths is described as a monocrystal whose behaviour includes both an isotropic and a kinematic strain

  16. Questions raised by the concept of nuclear damage in the ambit of the nuclear Conventions with particular regard to the German viewpoint

    International Nuclear Information System (INIS)

    Steinkemper, H.

    1985-01-01

    An important consequence of the amendment of the Paris Convention and the Brussels Supplementary Convention by the Protocols of 16 November 1982 is the replacement of the European Monetary Agreement unit of account by the International Monetary Fund's Special Drawing Right. The increase by a factor of 2.5 of the maximum amounts under the Brussels Convention is also an essential aspect of the revision. The question of damage covered by the nuclear third party liability regime was not affected by the 1982 amendments. This is why the author considers it appropriate to examine in further detail a number of important questions in this field. The paper deals with the following aspects: the scope and limits of the concept of nuclear damage; the right to be indemnified for disamenities and costs arising from evacuation and prevention measures; and the problem of the nuclear link of causality for damage likely to be attributed also to non-nuclear causes. (NEA) [fr

  17. Improving concept design of divertor support system for FAST tokamak using TRIZ theory and AHP approach

    International Nuclear Information System (INIS)

    Di Gironimo, G.; Carfora, D.; Esposito, G.; Labate, C.; Mozzillo, R.; Renno, F.; Lanzotti, A.; Siuko, M.

    2013-01-01

    Highlights: • Optimization of the RH system for the FAST divertor using TRIZ. • Participative design approach using virtual reality. • Comparison of product alternatives in an immersive virtual reality environment. • Prioritization of concept alternatives based on AHP. -- Abstract: The paper focuses on the application of the Theory of Inventive Problem Solving (TRIZ) to divertor Remote Handling (RH) issues in Fusion Advanced Studies Torus (FAST), a satellite tokamak acting as a test bed for the study and the development of innovative technologies oriented to ITER and DEMO programs. The objective of this study consists in generating concepts or solutions able to overcome design and technical weak points in the current maintenance procedure. Two different concepts are designed with the help of a parametric CAD software, CATIA V5, using a top-down modeling approach; kinematic simulations of the remote handling system are performed using Digital Mock-Up (DMU) capabilities of the software. The evaluation of the concepts is carried out involving a group of experts in a participative design approach using virtual reality, classifying the concepts with the help of the Analytical Hierarchy Process (AHP)

  18. Improving concept design of divertor support system for FAST tokamak using TRIZ theory and AHP approach

    Energy Technology Data Exchange (ETDEWEB)

    Di Gironimo, G., E-mail: giuseppe.digironimo@unina.it [Association Euratom/ENEA/CREATE, Università di Napoli Federico II, P.le Tecchio 80, 80125 Napoli (Italy); Carfora, D.; Esposito, G.; Labate, C.; Mozzillo, R.; Renno, F.; Lanzotti, A. [Association Euratom/ENEA/CREATE, Università di Napoli Federico II, P.le Tecchio 80, 80125 Napoli (Italy); Siuko, M. [VTT Systems Engineering, Tekniikankatu 1, 33720 Tampere (Finland)

    2013-11-15

    Highlights: • Optimization of the RH system for the FAST divertor using TRIZ. • Participative design approach using virtual reality. • Comparison of product alternatives in an immersive virtual reality environment. • Prioritization of concept alternatives based on AHP. -- Abstract: The paper focuses on the application of the Theory of Inventive Problem Solving (TRIZ) to divertor Remote Handling (RH) issues in Fusion Advanced Studies Torus (FAST), a satellite tokamak acting as a test bed for the study and the development of innovative technologies oriented to ITER and DEMO programs. The objective of this study consists in generating concepts or solutions able to overcome design and technical weak points in the current maintenance procedure. Two different concepts are designed with the help of a parametric CAD software, CATIA V5, using a top-down modeling approach; kinematic simulations of the remote handling system are performed using Digital Mock-Up (DMU) capabilities of the software. The evaluation of the concepts is carried out involving a group of experts in a participative design approach using virtual reality, classifying the concepts with the help of the Analytical Hierarchy Process (AHP)

  19. Investigating the Interrelationships among Conceptions of, Approaches to, and Self-Efficacy in Learning Science

    Science.gov (United States)

    Zheng, Lanqin; Dong, Yan; Huang, Ronghuai; Chang, Chun-Yen; Bhagat, Kaushal Kumar

    2018-01-01

    The purpose of this study was to examine the relations between primary school students' conceptions of, approaches to, and self-efficacy in learning science in Mainland China. A total of 1049 primary school students from Mainland China participated in this study. Three instruments were adapted to measure students' conceptions of learning science,…

  20. New approaches to the formation of concepts in the school course «Socio-economic geography of the world»

    Directory of Open Access Journals (Sweden)

    Микола Чишкала

    2016-10-01

    Full Text Available The article analyzes the problem of concepts’ formation in the course «Socio-economic geography of the world». In the formation of economic-geographical concepts in the 10th form we propose to use various tools of learning and specific approaches. 1st approach - the formation of concepts with the help of maps. Maps are models of economic and geographic facts reflection in the space. Statistics put on the map is an effective tool in the formation of economic and geographic concepts, in the analysis of concrete situation in the country or the world. With the help of maps we propose to form the concepts of megalopolis, urban agglomeration, population reproduction, demographic transition, migration, urbanization, and the like. 2nd approach - the formation of concepts on the basis of charts and diagrams. The diagram is the evidence which determines the dominance of one process or object over another. We propose to use diagrams for the formation of concepts about the occupational structure of population, sex-age composition of the population, exports, imports, employment, etc. The graph performs the function of digital data interpretation, comparison and grouping of objects and processes, illustrating the dynamics of the indicators. With the help of graphs we propose to reflect the dynamics of population, population explosion, migration, fertility, mortality, population density, etc 3rd approach - the formation of concepts on the basis of illustrations and schemes. By the illustrations we propose to form the concepts of suburbanity, pseudourbanity, agriculture, and so on. Schematic images are effective in constructing concepts about the geographical division of labour, depopulation, surrounding geo-environment, monitoring, etc. 4th approach - the formation of concepts with the help of tables. Tables are a transitional link between the text and the graphic image. Using tables we can form such concepts as: Republic, monarchy, life

  1. Partnership of power and business: european approaches and conceptions

    OpenAIRE

    Serhii Andriiovych Kvitka

    2013-01-01

    The article reviews the most common European scientific concept of interaction between government and business. On this basis, the analysis of the main achievements and shortcomings of theoretical and methodological approaches to the study of business as a political actor. Interest groups and pressure groups are a form of protective groups that influence the actions of the modern authorities, both in Europe and in Ukraine . In terms of pluralism, society is composed of a large num...

  2. Analysis of approaches to the concept of job satisfaction

    OpenAIRE

    Lysova E.

    2017-01-01

    the article is devoted the problem of satisfaction of person with his professional activities. It examines different approaches to understanding the phenomenon of job satisfaction, the analysis of their evolution in the works of domestic and Western scholars, describes the strengths and weaknesses of different interpretations of the concept of satisfaction. Almost a third of his life a person spends at work. In the labour force, he reveals himself as a person, implements the physical and ment...

  3. Integrated oncogeriatric approach: a systematic review of the literature using concept analysis.

    Science.gov (United States)

    Tremblay, Dominique; Charlebois, Kathleen; Terret, Catherine; Joannette, Sonia; Latreille, Jean

    2012-01-01

    The purpose of this study was to provide a more precise definition of an integrated oncogeriatric approach (IOGA) through concept analysis. The literature was reviewed from January 2005 to April 2011 integrating three broad terms: geriatric oncology, multidisciplinarity and integrated care delivery models. Citation selection was based on: (1) elderly cancer patients as the study population; (2) disease management and (3) case studies, intervention studies, assessments, evaluations and studies. Inclusion and exclusion criteria were refined in the course of the literature search. Initiatives in geriatric oncology that relate to oncology services, social support services and primary care services for elderly cancer patients. Elderly cancer patients aged 70 years old or more. Rodgers' concept analysis method was used for this study. The analysis was carried out according to thematic analysis based on the elements of the Chronic Care Model. The search identified 618 citations. After in-depth appraisal of 327 potential citations, 62 articles that met our inclusion criteria were included in the analysis. Three IOGA main attributes were identified, which constitute IOGA's core aspects: geriatric assessment (GA), comorbidity burden and treatment outcomes. The IOGA concept comprises two broad antecedents: coordinated healthcare delivery and primary supportive care services. Regarding the consequents of an integrated approach in geriatric oncology, the studies reviewed remain inconclusive. Our study highlights the pioneering character of the multidimensional IOGA concept, for which the relationship between clinical and organisational attributes, on the one hand, and contextual antecedents, on the other, is not well understood. We have yet to ascertain IOGA's consequents. IMPLICATIONS OF KEY FINDINGS: There is clearly a need for a whole-system approach to change that will provide direction for multilevel (clinical, organisational, strategic) interventions to support

  4. An impedance-based approach for detection and quantification of damage in cracked plates and loose bolts in bridge structures

    Science.gov (United States)

    Rabiei, Masoud; Sheldon, Jeremy; Palmer, Carl

    2012-04-01

    The applicability of Electro-Mechanical Impedance (EMI) approach to damage detection, localization and quantification in a mobile bridge structure is investigated in this paper. The developments in this paper focus on assessing the health of Armored Vehicle Launched Bridges (AVLBs). Specifically, two key failure mechanisms of the AVLB to be monitored were fatigue crack growth and damaged (loose) rivets (bolts) were identified. It was shown through experiment that bolt damage (defined here as different torque levels applied to bolts) can be detected, quantified and located using a network of lead zirconate titanate (PZT) transducers distributed on the structure. It was also shown that cracks of various sizes can be detected and quantified using the EMI approach. The experiments were performed on smaller laboratory specimens as well as full size bridge-like components that were built as part of this research. The effects of various parameters such as transducer type and size on the performance of the proposed health assessment approach were also investigated.

  5. Failure and damage analysis of advanced materials

    CERN Document Server

    Sadowski, Tomasz

    2015-01-01

    The papers in this volume present basic concepts and new developments in failure and damage analysis with focus on advanced materials such as composites, laminates, sandwiches and foams, and also new metallic materials. Starting from some mathematical foundations (limit surfaces, symmetry considerations, invariants) new experimental results and their analysis are shown. Finally, new concepts for failure prediction and analysis will be introduced and discussed as well as new methods of failure and damage prediction for advanced metallic and non-metallic materials. Based on experimental results the traditional methods will be revised.

  6. Designing and Teaching Business & Society Courses from a Threshold Concept Approach

    Science.gov (United States)

    Vidal, Natalia; Smith, Renae; Spetic, Wellington

    2015-01-01

    This article examines the redesign of an undergraduate course in Business & Society using a threshold concept approach. Business & Society courses may be troublesome for students because they depart from the premise that business is limited to creating value for shareholders. We argue that Business & Society courses contain a web of…

  7. Towards a Fuzzy Bayesian Network Based Approach for Safety Risk Analysis of Tunnel-Induced Pipeline Damage.

    Science.gov (United States)

    Zhang, Limao; Wu, Xianguo; Qin, Yawei; Skibniewski, Miroslaw J; Liu, Wenli

    2016-02-01

    Tunneling excavation is bound to produce significant disturbances to surrounding environments, and the tunnel-induced damage to adjacent underground buried pipelines is of considerable importance for geotechnical practice. A fuzzy Bayesian networks (FBNs) based approach for safety risk analysis is developed in this article with detailed step-by-step procedures, consisting of risk mechanism analysis, the FBN model establishment, fuzzification, FBN-based inference, defuzzification, and decision making. In accordance with the failure mechanism analysis, a tunnel-induced pipeline damage model is proposed to reveal the cause-effect relationships between the pipeline damage and its influential variables. In terms of the fuzzification process, an expert confidence indicator is proposed to reveal the reliability of the data when determining the fuzzy probability of occurrence of basic events, with both the judgment ability level and the subjectivity reliability level taken into account. By means of the fuzzy Bayesian inference, the approach proposed in this article is capable of calculating the probability distribution of potential safety risks and identifying the most likely potential causes of accidents under both prior knowledge and given evidence circumstances. A case concerning the safety analysis of underground buried pipelines adjacent to the construction of the Wuhan Yangtze River Tunnel is presented. The results demonstrate the feasibility of the proposed FBN approach and its application potential. The proposed approach can be used as a decision tool to provide support for safety assurance and management in tunnel construction, and thus increase the likelihood of a successful project in a complex project environment. © 2015 Society for Risk Analysis.

  8. A damage mechanics based approach to structural deterioration and reliability

    Energy Technology Data Exchange (ETDEWEB)

    Bhattcharya, B.; Ellingwood, B. [Johns Hopkins Univ., Baltimore, MD (United States). Dept. of Civil Engineering

    1998-02-01

    Structural deterioration often occurs without perceptible manifestation. Continuum damage mechanics defines structural damage in terms of the material microstructure, and relates the damage variable to the macroscopic strength or stiffness of the structure. This enables one to predict the state of damage prior to the initiation of a macroscopic flaw, and allows one to estimate residual strength/service life of an existing structure. The accumulation of damage is a dissipative process that is governed by the laws of thermodynamics. Partial differential equations for damage growth in terms of the Helmholtz free energy are derived from fundamental thermodynamical conditions. Closed-form solutions to the equations are obtained under uniaxial loading for ductile deformation damage as a function of plastic strain, for creep damage as a function of time, and for fatigue damage as function of number of cycles. The proposed damage growth model is extended into the stochastic domain by considering fluctuations in the free energy, and closed-form solutions of the resulting stochastic differential equation are obtained in each of the three cases mentioned above. A reliability analysis of a ring-stiffened cylindrical steel shell subjected to corrosion, accidental pressure, and temperature is performed.

  9. A damage mechanics based approach to structural deterioration and reliability

    International Nuclear Information System (INIS)

    Bhattcharya, B.; Ellingwood, B.

    1998-02-01

    Structural deterioration often occurs without perceptible manifestation. Continuum damage mechanics defines structural damage in terms of the material microstructure, and relates the damage variable to the macroscopic strength or stiffness of the structure. This enables one to predict the state of damage prior to the initiation of a macroscopic flaw, and allows one to estimate residual strength/service life of an existing structure. The accumulation of damage is a dissipative process that is governed by the laws of thermodynamics. Partial differential equations for damage growth in terms of the Helmholtz free energy are derived from fundamental thermodynamical conditions. Closed-form solutions to the equations are obtained under uniaxial loading for ductile deformation damage as a function of plastic strain, for creep damage as a function of time, and for fatigue damage as function of number of cycles. The proposed damage growth model is extended into the stochastic domain by considering fluctuations in the free energy, and closed-form solutions of the resulting stochastic differential equation are obtained in each of the three cases mentioned above. A reliability analysis of a ring-stiffened cylindrical steel shell subjected to corrosion, accidental pressure, and temperature is performed

  10. A Hybrid Approach to Composite Damage and Failure Analysis Combining Synergistic Damage Mechanics and Peridynamics

    Science.gov (United States)

    2017-12-31

    Composite Damage and Failure Analysis Combinin Synergistic Damage Mechanics and Peridynamics 6. AUTHOR(S) 5b. GRANT NUMBER N00014-16-1-2173 5c...NUMBER 8. PERFORMING ORGANIZATION REPORT NUMBER Texas A&M Engineering Experiment Station (TEES) 400 Harvey Mitchell Parkway, Suite 300 College...1.3 related to Synergistic Damage Mechanics and Tasks 2.2 and 2.4 related to Peridynamics, as described in the project proposal. The activities

  11. A comparison of conventional local approach and the short crack approach to fatigue crack initiation at a notch

    Energy Technology Data Exchange (ETDEWEB)

    Ranganathan, Narayanaswami; Leroy, Rene; Tougui, Abdellah [Laboratoire de Mecanique et Rheologie, Universite Francois Rabelais de Tours, Polytech Tours, Departement Mecanique et Conception de Systemes, Tours (France)

    2009-09-15

    Methods to estimate fatigue crack initiation life at a notch tip are compared. The methods used determine the strain amplitudes at the notch tip using Neuber's or Glinka's approximation. In conventional approaches, equivalent-damage levels are determined, using appropriate strain-life relationships coupled with damage-summation models. In the short-crack approach, a crack-like defect is assumed to exist at the notch tip. It is shown that the short-crack concept can be successfully applied to predict crack-initiation behavior at a notch. Model predictions are compared with carefully designed experiments. It is shown that model predictions are very close to experimentally measured lives under an aircraft-wing loading spectrum. (Abstract Copyright [2009], Wiley Periodicals, Inc.)

  12. Monument Damage Information System (mondis): AN Ontological Approach to Cultural Heritage Documentation

    Science.gov (United States)

    Cacciotti, R.; Valach, J.; Kuneš, P.; Čerňanský, M.; Blaško, M.; Křemen, P.

    2013-07-01

    Deriving from the complex nature of cultural heritage conservation it is the need for enhancing a systematic but flexible organization of expert knowledge in the field. Such organization should address comprehensively the interrelations and complementariness among the different factors that come into play in the understanding of diagnostic and intervention problems. The purpose of MONDIS is to endorse this kind of organization. The approach consists in applying an ontological representation to the field of heritage conservation in order to establish an appropriate processing of data. The system allows replicating in a computer readable form the basic dependence among factors influencing the description, diagnosis and intervention of damages to immovable objects. More specifically MONDIS allows to input and search entries concerning object description, structural evolution, location characteristics and risk, component, material properties, surveys and measurements, damage typology, damage triggering events and possible interventions. The system supports searching features typical of standard databases, as it allows for the digitalization of a wide range of information including professional reports, books, articles and scientific papers. It also allows for computer aided retrieval of information tailored to user's requirements. The foreseen outputs will include a web user interface and a mobile application for visual inspection purposes.

  13. Influence of shock absorber condition on pavement fatigue using relative damage concept

    Directory of Open Access Journals (Sweden)

    Pablo Kubo

    2015-12-01

    Full Text Available Considering the importance of the road transportation nowadays, concerns related to pavement deterioration and maintenance have become relevant subjects. Especially for commercial vehicles, the vertical dynamic load (characterized by the tire-road interaction is directly related to wear on the road surface. Given this, the main objective of this paper is to analyse effects of vertical loads applied on the flexible pavement, considering the variation of the condition of shock absorbers from a truck's front suspension. The measurements were performed on a rigid truck, with 2 steering front axles, in a durability test track located in Brazil. With a constant load of 6 tons on the front suspension (the maximum allowed load on front axles according to Brazilian legislation, 3 different shock absorber conditions were evaluated: new, used and failed. By applying the relative damage concept, it is possible to conclude that the variation of the shock absorber conditions will significantly affect the vertical load applied on the pavement. Although the results clearly point to a dependent relationship between the load and the condition of the shock absorbers, it is recommended to repeat the same methodology, in future to analyse the influence of other quarter car model variants (such as spring rate, mass and tire spring stiffness.

  14. An economic approach to 'losses and damages'

    International Nuclear Information System (INIS)

    Roulleau, Thomas

    2015-01-01

    Given ever more greenhouse gas emissions, developing countries have recently placed the issue of 'losses and damages' on the bargaining table. The losses and damages ensuing from climate catastrophes depend on factors that are both planetary (extreme meteorological phenomena wherein climate change is a factor) and domestic (the exposure and vulnerability of populations). The Warsaw International Mechanism for Loss and Damage Associated with Climate Change Impacts was set up in 2013. Several developing countries are demanding that it become autonomous with its own funding. This demand does not seem justified scientifically or economically in the current context. Although economic losses owing to climate-related catastrophes have increased in recent decades, they are, as scientific studies have shown, due to increases in wealth and in the population's exposure and not to climate change as such. Furthermore, the aforementioned funding mechanism risks impeding efficient domestic actions for reducing a country's vulnerability and its population's exposure to climate-related risks

  15. Constructive and critical approach of the radiation damage simulation

    International Nuclear Information System (INIS)

    Becquart, Ch.

    2002-11-01

    This work deals with the problem of radiation damage in materials for applications in development of fission and nuclear fusion technologies. It is organised in 3 sections. In section 1 are presented the mechanisms of formation and the evolution kinetics of the primary damage. Section 2 is devoted to the study of the sensitivity of the radiation damage at different approximations. Section 3 discusses the contribution of the ab initio calculations to the study of radiation damage and more particularly the point defects in a dilute Fe-Cu ferritic alloy. This work is illustrated by several publications added in each section. (O.M.)

  16. Fault Wear by Damage Evolution During Steady-State Slip

    Science.gov (United States)

    Lyakhovsky, Vladimir; Sagy, Amir; Boneh, Yuval; Reches, Ze'ev

    2014-11-01

    Slip along faults generates wear products such as gouge layers and cataclasite zones that range in thickness from sub-millimeter to tens of meters. The properties of these zones apparently control fault strength and slip stability. Here we present a new model of wear in a three-body configuration that utilizes the damage rheology approach and considers the process as a microfracturing or damage front propagating from the gouge zone into the solid rock. The derivations for steady-state conditions lead to a scaling relation for the damage front velocity considered as the wear-rate. The model predicts that the wear-rate is a function of the shear-stress and may vanish when the shear-stress drops below the microfracturing strength of the fault host rock. The simulated results successfully fit the measured friction and wear during shear experiments along faults made of carbonate and tonalite. The model is also valid for relatively large confining pressures, small damage-induced change of the bulk modulus and significant degradation of the shear modulus, which are assumed for seismogenic zones of earthquake faults. The presented formulation indicates that wear dynamics in brittle materials in general and in natural faults in particular can be understood by the concept of a "propagating damage front" and the evolution of a third-body layer.

  17. Concept design of DEMO divertor cassette remote handling: Simply supported beam approach

    Energy Technology Data Exchange (ETDEWEB)

    Mozzillo, Rocco [CREATE, University of Naples Federico II, DII, P.le Tecchio 80, 80125, Naples (Italy); Di Gironimo, Giuseppei, E-mail: peppe.digironimo@gmail.com [CREATE, University of Naples Federico II, DII, P.le Tecchio 80, 80125, Naples (Italy); Mäkinen, Harri [VTT Technical Research Centre of Finland, P.O. Box 1300, FI-33101 Tampere (Finland); Miccichè, Gioacchino [ENEA – CR Brasimone, I-40032 Camugnano, BO (Italy); Määttä, Timo [VTT Technical Research Centre of Finland, P.O. Box 1300, FI-33101 Tampere (Finland)

    2017-03-15

    Highlights: • The present work focused on a new approach to the design of DEMO Divertor Cassette Remote Handling Equipment. • The work provides an alternative approach to the design based on the concept of a simply supported beam. • The approach proposed focuses a Divertor Cassette mover that performs the maintenance of the three cassettes at each port. • First rough dimensioning of the main components has been provided and demonstrating the feasibility of the design solutions. • The main idea of the work consisted on a design capable to use knowledge already adopted in industrial contexts. - Abstract: The present work focused on the development of a new approach to the concept design of DEMO Divertor Cassette (DC) Remote Handling Equipment (RHE). The approach is based on three main assumptions: the DC remote handling activities and the equipment shall be simplified as much as possible; technologies well known and consolidated in the industrial context can be adopted also in the nuclear fusion field; the design of the RHE should be based on a simply supported beam approach instead of cantilever approach. In detail, during the maintenance activities the barycentre of the DC is centred with respect to DC supports. This solution could simplify the design of RHE with a consequent reduction of the design and development costs. Moreover also the DC remote handling tasks shall be simplified in order to better manage the DC maintenance processes. For this reason the DC assembly and disassembly process has been simplified dividing the main sequences in basic movements. For each movement a dedicated tool has been conceived.

  18. A voice-of-consumer approach in development of new seafood product concepts

    NARCIS (Netherlands)

    Altintzoglou, T.; Einarsdóttir, G.; Valsdóttir, T.; Schelvis, R.; Skåra, T.; Luten, J.B.

    2010-01-01

    This article describes a consumer-based approach for development of new seafood product concepts among young adults in Norway and Iceland. The study aim was to gain insight into how young adults determine their acceptance of seafood and make potential product choices. Additional insights measured

  19. A Novel Approach to Semantic Similarity Measurement Based on a Weighted Concept Lattice: Exemplifying Geo-Information

    Directory of Open Access Journals (Sweden)

    Jia Xiao

    2017-11-01

    Full Text Available The measurement of semantic similarity has been widely recognized as having a fundamental and key role in information science and information systems. Although various models have been proposed to measure semantic similarity, these models are not able effectively to quantify the weights of relevant factors that impact on the judgement of semantic similarity, such as the attributes of concepts, application context, and concept hierarchy. In this paper, we propose a novel approach that comprehensively considers the effects of various factors on semantic similarity judgment, which we name semantic similarity measurement based on a weighted concept lattice (SSMWCL. A feature model and network model are integrated together in SSMWCL. Based on the feature model, the combined weight of each attribute of the concepts is calculated by merging its information entropy and inclusion-degree importance in a specific application context. By establishing the weighted concept lattice, the relative hierarchical depths of concepts for comparison are computed according to the principle of the network model. The integration of feature model and network model enables SSMWCL to take account of differences in concepts more comprehensively in semantic similarity measurement. Additionally, a workflow of SSMWCL is designed to demonstrate these procedures and a case study of geo-information is conducted to assess the approach.

  20. Damage energy functions for compounds and alloys

    International Nuclear Information System (INIS)

    Parkin, D.M.; Coulter, C.A.

    1977-01-01

    The concept of the damage energy of an energetic primary knock-on atom in a material is a central component in the procedure used to calculate dpa for metals exposed to neutron and charged particle radiation. Coefficients for analytic fits to the calculated damage energy functions are given for Al 2 O 3 , Si 3 N 4 , Y 2 O 3 , and NbTi. Damage efficiencies are given for Al 2 O 3

  1. Damage detection using piezoelectric transducers and the Lamb wave approach: I. System analysis

    International Nuclear Information System (INIS)

    Wang, X; Lu, Y; Tang, J

    2008-01-01

    Structural damage detection using piezoelectric transducers and the Lamb wave approach has been under intensive investigations. A commonly pursued topic is the selection of system parameters such that the detection performance can be optimized. Previous studies have indicated that the excitation center frequency plays a critical role, and suggested use of the 'sweet spot' frequency to maximize the peak wave amplitude ratio between the S 0 and the A 0 modes. In this paper, the analytical formulation of Lamb wave propagation on a narrow-strip beam excited and sensed by piezoelectric transducers is outlined first. Then, the antisymmetric and symmetric contents of the wave propagation response are analyzed in detail with respect to system parameters. In particular, the parametric influence on the 'sweet spot' frequency is investigated systematically. The complicated interaction of the wave components with respect to damage is illustrated through case studies. The analytical study is supported by numerical analysis using the finite element method and by experimental investigation. This research provides the mechanistic basis for robust damage detection using data processing and statistical analysis tools which is the focus of the second paper of this two-paper series

  2. ENERGY CONCEPT ALIVE. NEW APPROACH IN THE FIGHT AGAINST CANCER

    Directory of Open Access Journals (Sweden)

    V. S. Shchukin

    2015-10-01

    Full Text Available New approach to the problem of struggle with malignant tumors based on the suggested by the authors energetic concept of living matter considering a human organism as an open non-self-organizing biological system that is the part of organism of a higher level of organization - Biosphere, and that is under full control of geophysical factors - first of all electromagnetic field of the Earth and composition of atmospheric air is set forth. The mentioned factors fatefully determine length of life - specific and individual - of any living organism, including human being. On the basis of the set forth approach a new means of prevention and removal from the human organism of malignant tumors was suggested.

  3. Concept mapping and network analysis: an analytic approach to measure ties among constructs.

    Science.gov (United States)

    Goldman, Alyssa W; Kane, Mary

    2014-12-01

    Group concept mapping is a mixed-methods approach that helps a group visually represent its ideas on a topic of interest through a series of related maps. The maps and additional graphics are useful for planning, evaluation and theory development. Group concept maps are typically described, interpreted and utilized through points, clusters and distances, and the implications of these features in understanding how constructs relate to one another. This paper focuses on the application of network analysis to group concept mapping to quantify the strength and directionality of relationships among clusters. The authors outline the steps of this analysis, and illustrate its practical use through an organizational strategic planning example. Additional benefits of this analysis to evaluation projects are also discussed, supporting the overall utility of this supplemental technique to the standard concept mapping methodology. Copyright © 2014 Elsevier Ltd. All rights reserved.

  4. Rheological-dynamical continuum damage model for concrete under uniaxial compression and its experimental verification

    Directory of Open Access Journals (Sweden)

    Milašinović Dragan D.

    2015-01-01

    Full Text Available A new analytical model for the prediction of concrete response under uniaxial compression and its experimental verification is presented in this paper. The proposed approach, referred to as the rheological-dynamical continuum damage model, combines rheological-dynamical analogy and damage mechanics. Within the framework of this approach the key continuum parameters such as the creep coefficient, Poisson’s ratio and damage variable are functionally related. The critical values of the creep coefficient and damage variable under peak stress are used to describe the failure mode of the concrete cylinder. The ultimate strain is determined in the post-peak regime only, using the secant stress-strain relation from damage mechanics. The post-peak branch is used for the energy analysis. Experimental data for five concrete compositions were obtained during the examination presented herein. The principal difference between compressive failure and tensile fracture is that there is a residual stress in the specimens, which is a consequence of uniformly accelerated motion of load during the examination of compressive strength. The critical interpenetration displacements and crushing energy are obtained theoretically based on the concept of global failure analysis. [Projekat Ministarstva nauke Republike Srbije, br. ON 174027: Computational Mechanics in Structural Engineering i br. TR 36017: Utilization of by-products and recycled waste materials in concrete composites for sustainable construction development in Serbia: Investigation and environmental assessment of possible applications

  5. The ASLOTS concept: An interactive, adaptive decision support concept for Final Approach Spacing of Aircraft (FASA). FAA-NASA Joint University Program

    Science.gov (United States)

    Simpson, Robert W.

    1993-01-01

    This presentation outlines a concept for an adaptive, interactive decision support system to assist controllers at a busy airport in achieving efficient use of multiple runways. The concept is being implemented as a computer code called FASA (Final Approach Spacing for Aircraft), and will be tested and demonstrated in ATCSIM, a high fidelity simulation of terminal area airspace and airport surface operations. Objectives are: (1) to provide automated cues to assist controllers in the sequencing and spacing of landing and takeoff aircraft; (2) to provide the controller with a limited ability to modify the sequence and spacings between aircraft, and to insert takeoffs and missed approach aircraft in the landing flows; (3) to increase spacing accuracy using more complex and precise separation criteria while reducing controller workload; and (4) achieve higher operational takeoff and landing rates on multiple runways in poor visibility.

  6. Concept and methodology for evaluating core damage frequency considering failure correlation at multi units and sites and its application

    Energy Technology Data Exchange (ETDEWEB)

    Ebisawa, K.; Teragaki, T.; Nomura, S. [Former Incorporated Administrative Agency, Japan Nuclear Safety Organization (Japan); Abe, H., E-mail: Hiroshi_abe@nsr.go.jp [Former Incorporated Administrative Agency, Japan Nuclear Safety Organization (Japan); Shigemori, M.; Shimomoto, M. [Mizuho Information & Research Institute, 2-3, Kanda-Nishikicho, Chiyoda-ku, Tokyo (Japan)

    2015-07-15

    Highlights: • We develop a method to evaluate CDF considering failure correlation at multi units. • We develop a procedure to evaluate correlation coefficient between multi components. • We evaluate CDF at two different BWR units using correlation coefficients. • We confirm the validity of method and correlation coefficient through the evaluation. - Abstract: The Tohoku earthquake (Mw9.0) occurred on March 11, 2011 and caused a large tsunami. The Fukushima Daiichi Nuclear Power Plant with six units were overwhelmed by the tsunami and core damage occurred. Authors proposed the concept and method for evaluating core damage frequency (CDF) considering failure correlation at the multi units and sites. Based on the above method, one of authors developed the procedure for evaluating the failure correlation coefficient and response correlation coefficient between the multi components under the strong seismic motion. These method and failure correlation coefficients were applied to two different BWR units and their CDF was evaluated by seismic probabilistic risk assessment technology. Through this quantitative evaluation, the validity of the method and failure correlation coefficient was confirmed.

  7. Concept and methodology for evaluating core damage frequency considering failure correlation at multi units and sites and its application

    International Nuclear Information System (INIS)

    Ebisawa, K.; Teragaki, T.; Nomura, S.; Abe, H.; Shigemori, M.; Shimomoto, M.

    2015-01-01

    Highlights: • We develop a method to evaluate CDF considering failure correlation at multi units. • We develop a procedure to evaluate correlation coefficient between multi components. • We evaluate CDF at two different BWR units using correlation coefficients. • We confirm the validity of method and correlation coefficient through the evaluation. - Abstract: The Tohoku earthquake (Mw9.0) occurred on March 11, 2011 and caused a large tsunami. The Fukushima Daiichi Nuclear Power Plant with six units were overwhelmed by the tsunami and core damage occurred. Authors proposed the concept and method for evaluating core damage frequency (CDF) considering failure correlation at the multi units and sites. Based on the above method, one of authors developed the procedure for evaluating the failure correlation coefficient and response correlation coefficient between the multi components under the strong seismic motion. These method and failure correlation coefficients were applied to two different BWR units and their CDF was evaluated by seismic probabilistic risk assessment technology. Through this quantitative evaluation, the validity of the method and failure correlation coefficient was confirmed

  8. Proof of Concept for an Approach to a Finer Resolution Inventory

    Science.gov (United States)

    Chris J. Cieszewski; Kim Iles; Roger C. Lowe; Michal Zasada

    2005-01-01

    This report presents a proof of concept for a statistical framework to develop a timely, accurate, and unbiased fiber supply assessment in the State of Georgia, U.S.A. The proposed approach is based on using various data sources and modeling techniques to calibrate satellite image-based statewide stand lists, which provide initial estimates for a State inventory on a...

  9. Damage Detection and Verification System (DDVS) for In-Situ Health Monitoring

    Science.gov (United States)

    Williams, Martha K.; Lewis, Mark; Szafran, J.; Shelton, C.; Ludwig, L.; Gibson, T.; Lane, J.; Trautwein, T.

    2015-01-01

    Project presentation for Game Changing Program Smart Book Release. Detection and Verification System (DDVS) expands the Flat Surface Damage Detection System (FSDDS) sensory panels damage detection capabilities and includes an autonomous inspection capability utilizing cameras and dynamic computer vision algorithms to verify system health. Objectives of this formulation task are to establish the concept of operations, formulate the system requirements for a potential ISS flight experiment, and develop a preliminary design of an autonomous inspection capability system that will be demonstrated as a proof-of-concept ground based damage detection and inspection system.

  10. [Damage control in trauma patients with hemodynamic instability].

    Science.gov (United States)

    Müller, Thorben; Doll, Dietrich; Kliebe, Frank; Ruchholtz, Steffen; Kühne, Christian

    2010-10-01

    The term "Damage-control" is borrowed from naval terminology. It means the initial control of a damaged ship. Because of the lethal triad in multiple injured patients the classical concept of definitive surgically therapy in the acute phase of the injury has a high rate of complications such as exsanguination, sepsis, heart failure and multiple organ failure. The core idea of the damage control concept was to minimize the additional trauma by surgical operations in these critical patients in the first phase. This means temporary control of a hemorrhage and measures for stopping abdominal contamination. After 24 - 48 hours in the intensive care unit and correction of physiological disturbances further interventions are performed for definitively treatment of the injuries. Summarized, the damage control strategy comprises an abbreviated operation, intensive care unit resuscitation, and a return to the operating room for the definitive operation after hemodynamic stabilisation of the patient. © Georg Thieme Verlag Stuttgart · New York.

  11. Contribution to the numerical study of concrete behaviour and of reinforced concrete structures submitted to coupled thermal and mechanical solicitations: a damageable thermo-elasto-plastic approach

    International Nuclear Information System (INIS)

    Nechnech, W.

    2000-12-01

    The aim of this research is the development of an Finite Element model for the analysis of reinforced concrete structures under thermal, mechanical loadings or any combination of them. An available synthesis of results on the concrete behavior under thermal solicitation is exposed. The different behavior of concrete that can be founded notably in thermo-mechanical analysis (Damage, unilateral phenomenon, thermo-mechanical interaction,...) are underlined. The various families of modeling are analyzed thereafter while underlining the important aspects of the behavior that each one can re-transcribe. A new thermo-plastic damage model for plain concrete subjected to combined thermal and cyclic loading is developed using the concept of plastic-work-hardening and stiffness degradation in continuum damage mechanics. Two damage variables are used: the first one for mechanical action and the second one for thermal action. Further, thermo-mechanical interaction strains have been introduced to describe the influence of mechanical loading on the physical process of thermal expansion of concrete. The constitutive relations for elastoplastic responses are decoupled from the degradation damage responses by using the effective stress concept. This method provides advantages in the numerical implementation. A simple and thermodynamically consistent scalar degradation model is introduced to simulate the effect of damage on elastic stiffness and its recovery during crack opening and closing. Efficient computational algorithms for the proposed model are subsequently explored and performance of this model is demonstrated with numerical examples. (author)

  12. Concepts and Bounded Rationality: An Application of Niestegge's Approach to Conditional Quantum Probabilities

    Science.gov (United States)

    Blutner, Reinhard

    2009-03-01

    Recently, Gerd Niestegge developed a new approach to quantum mechanics via conditional probabilities developing the well-known proposal to consider the Lüders-von Neumann measurement as a non-classical extension of probability conditionalization. I will apply his powerful and rigorous approach to the treatment of concepts using a geometrical model of meaning. In this model, instances are treated as vectors of a Hilbert space H. In the present approach there are at least two possibilities to form categories. The first possibility sees categories as a mixture of its instances (described by a density matrix). In the simplest case we get the classical probability theory including the Bayesian formula. The second possibility sees categories formed by a distinctive prototype which is the superposition of the (weighted) instances. The construction of prototypes can be seen as transferring a mixed quantum state into a pure quantum state freezing the probabilistic characteristics of the superposed instances into the structure of the formed prototype. Closely related to the idea of forming concepts by prototypes is the existence of interference effects. Such inference effects are typically found in macroscopic quantum systems and I will discuss them in connection with several puzzles of bounded rationality. The present approach nicely generalizes earlier proposals made by authors such as Diederik Aerts, Andrei Khrennikov, Ricardo Franco, and Jerome Busemeyer. Concluding, I will suggest that an active dialogue between cognitive approaches to logic and semantics and the modern approach of quantum information science is mandatory.

  13. The self-schema model: a theoretical approach to the self-concept in eating disorders.

    Science.gov (United States)

    Stein, K F

    1996-04-01

    Over the last several decades, the self-concept has been implicated as a important determinant of eating disorders (ED). Although considerable progress has been made, questions remain unanswered about the properties of self-concept that distinguish women with an ED from other populations, and mechanisms that link the self-concept to the disordered behaviors. Markus's self-schema model is presented as a theoretical approach to explore the role of the self-concept in ED. To show how the schema model can be integrated with existing work on the self-concept in ED, a framework is proposed that addresses the number, content, and accessibility of the self-schemas. More specifically, it is posited that a limited collection of positive self-schemas available in memory, in combination with a chronically and inflexibly accessible body-weight self-schema, lead to the disordered behaviors associated with anorexia nervosa and bulimia nervosa.

  14. Concept Analysis of Spirituality: An Evolutionary Approach.

    Science.gov (United States)

    Weathers, Elizabeth; McCarthy, Geraldine; Coffey, Alice

    2016-04-01

    The aim of this article is to clarify the concept of spirituality for future nursing research. Previous concept analyses of spirituality have mostly reviewed the conceptual literature with little consideration of the empirical literature. The literature reviewed in prior concept analyses extends from 1972 to 2005, with no analysis conducted in the past 9 years. Rodgers' evolutionary framework was used to review both the theoretical and empirical literature pertaining to spirituality. Evolutionary concept analysis is a formal method of philosophical inquiry, in which papers are analyzed to identify attributes, antecedents, and consequences of the concept. Empirical and conceptual literature. Three defining attributes of spirituality were identified: connectedness, transcendence, and meaning in life. A conceptual definition of spirituality was proposed based on the findings. Also, four antecedents and five primary consequences of spirituality were identified. Spirituality is a complex concept. This concept analysis adds some clarification by proposing a definition of spirituality that is underpinned by both conceptual and empirical research. Furthermore, exemplars of spirituality, based on prior qualitative research, are presented to support the findings. Hence, the findings of this analysis could guide future nursing research on spirituality. © 2015 Wiley Periodicals, Inc.

  15. Mathematical knowledge in teaching of fraction concepts using diagrammatical approach

    Science.gov (United States)

    Veloo, Palanisamy Kathir; Puteh, Marzita

    2017-05-01

    Teachers need various types of knowledge in order to deliver various fraction concepts at elementary level. In this paper, Balls' framework (2008) or, Mathematical Knowledge for Teaching (MKT) is used as benchmark guideline. This paper investigates and explores component of MKT knowledge among eight experienced teachers of the primary school. Data was collected using paper pencil test, interview and video recording. This paper, narrowed to teacher's knowledge and their practices while teaching of various fractions concepts using diagrammatical approach in present of MKT. The data gathered from teachers were analyzed using thematic analysis techniques. The results indicated that teachers lack various components of MKT knowledge as a proposal by various researchers and assumed that teaching as procedural more than enough due to lack of deep understanding of mathematics and the various types of MKT is not required due to the present of practices in the mathematics classroom.

  16. Steady State Shift Damage Localization

    DEFF Research Database (Denmark)

    Sekjær, Claus; Bull, Thomas; Markvart, Morten Kusk

    2017-01-01

    The steady state shift damage localization (S3DL) method localizes structural deterioration, manifested as either a mass or stiffness perturbation, by interrogating the damage-induced change in the steady state vibration response with damage patterns cast from a theoretical model. Damage is, thus...... the required accuracy when examining complex structures, an extensive amount of degrees of freedom (DOF) must often be utilized. Since the interrogation matrix for each damage pattern depends on the size of the system matrices constituting the FE-model, the computational time quickly becomes of first......-order importance. The present paper investigates two sub-structuring approaches, in which the idea is to employ Craig-Bampton super-elements to reduce the amount of interrogation distributions while still providing an acceptable localization resolution. The first approach operates on a strict super-element level...

  17. A data fusion approach for progressive damage quantification in reinforced concrete masonry walls

    International Nuclear Information System (INIS)

    Vanniamparambil, Prashanth Abraham; Carmi, Rami; Kontsos, Antonios; Bolhassani, Mohammad; Khan, Fuad; Bartoli, Ivan; Moon, Franklin L; Hamid, Ahmad

    2014-01-01

    This paper presents a data fusion approach based on digital image correlation (DIC) and acoustic emission (AE) to detect, monitor and quantify progressive damage development in reinforced concrete masonry walls (CMW) with varying types of reinforcements. CMW were tested to evaluate their structural behavior under cyclic loading. The combination of DIC with AE provided a framework for the cross-correlation of full field strain maps on the surface of CMW with volume-inspecting acoustic activity. AE allowed in situ monitoring of damage progression which was correlated with the DIC through quantification of strain concentrations and by tracking crack evolution, visually verified. The presented results further demonstrate the relationships between the onset and development of cracking with changes in energy dissipation at each loading cycle, measured principal strains and computed AE energy, providing a promising paradigm for structural health monitoring applications on full-scale concrete masonry buildings. (paper)

  18. A Hybrid Approach to Composite Damage and Failure Analysis Combining Synergistic Damage Mechanics and Peridynamics

    Science.gov (United States)

    2017-09-30

    other provision of law, no person shall be subject to any penalty for fai ling to comply with a collection of information if it does not display a...to Composite Damage and Fai lure Analysis Combining Synergistic Damage Mechanics and Peridynamics Sb. GRANT NUMBER NOOO 14-16-1-2173 Sc. PROGRAM

  19. Safety design approach for JSFR toward the realization of GEN IV SFR

    International Nuclear Information System (INIS)

    Kubo, S.; Yamano, H.; Chikazawa, Y.; Shimakawa, Y.

    2013-01-01

    Conclusion: Safety Design Approach for JSFR: • Based on the safety design criteria for Generation-IV SFR • DECs, Situations practically eliminated and related design measures are identified and selected with due consideration of the safety features of SFR and the lessons learned from the TEPCO’s Fukushima Dai-ichi nuclear power plants accident Safety Design Concept of JSFR: • For failure to shutdown: Passive shutdown capability, Mitigation of core damage (Prevention of severe mechanical energy release, In-Vessel Retention) • For failure to remove heat: Prevention of significant core damage (Natural circulation DHR, Alternative cooling measures) • Containment: Prevention of sever dynamic loads by design measures (IVR, double boundary concept, inertization)

  20. Muscle Damage After Total Hip Arthroplasty Through the Direct Anterior Approach for Developmental Dysplasia of the Hip.

    Science.gov (United States)

    Kawasaki, Masashi; Hasegawa, Yukiharu; Okura, Toshiaki; Ochiai, Satoshi; Fujibayashi, Takayoshi

    2017-08-01

    Total hip arthroplasty (THA) through the direct anterior approach (DAA) is known to cause less muscle damage than other surgical approaches. However, more complex primary cases, such as developmental dysplasia of the hip (DDH), might often cause muscle damage. The objective of the present study was to clarify the muscle damage observed 1 year after THA through the DAA for DDH using magnetic resonance imaging. We prospectively compared the muscle cross-sectional area (M-CSA) and fatty atrophy (FA) in muscles by magnetic resonance imaging and the Harris hip score before and at 1-year follow-up after THA through the DAA in 3 groups: 37 patients with Crowe group 1 DDH (D1), 13 patients with Crowe group 2 and 3 DDH (D2 + 3), and 12 patients with osteonecrosis as a control. THA through the DAA for D1 displayed significantly decreased M-CSA and significantly increased FA in the gluteus minimus (Gmini), the tensor fasciae latae (TFL), and the obturator internus (OI). Patients with D2 + 3 group did not have decreased M-CSA in the TFL or increased FA in the Gmini. Postoperatively, a significant negative correlation was observed between the M-CSA and FA for the OI in patients with D1 and D2 + 3. THA through the DAA for DDH caused the damage in the Gmini, the TFL, and the OI; severe damage was observed in the OI, showing increased FA with decreased M-CSA in patients with both D1 and D2 + 3. Copyright © 2017 Elsevier Inc. All rights reserved.

  1. Estimating shaking-induced casualties and building damage for global earthquake events: a proposed modelling approach

    Science.gov (United States)

    So, Emily; Spence, Robin

    2013-01-01

    Recent earthquakes such as the Haiti earthquake of 12 January 2010 and the Qinghai earthquake on 14 April 2010 have highlighted the importance of rapid estimation of casualties after the event for humanitarian response. Both of these events resulted in surprisingly high death tolls, casualties and survivors made homeless. In the Mw = 7.0 Haiti earthquake, over 200,000 people perished with more than 300,000 reported injuries and 2 million made homeless. The Mw = 6.9 earthquake in Qinghai resulted in over 2,000 deaths with a further 11,000 people with serious or moderate injuries and 100,000 people have been left homeless in this mountainous region of China. In such events relief efforts can be significantly benefitted by the availability of rapid estimation and mapping of expected casualties. This paper contributes to ongoing global efforts to estimate probable earthquake casualties very rapidly after an earthquake has taken place. The analysis uses the assembled empirical damage and casualty data in the Cambridge Earthquake Impacts Database (CEQID) and explores data by event and across events to test the relationships of building and fatality distributions to the main explanatory variables of building type, building damage level and earthquake intensity. The prototype global casualty estimation model described here uses a semi-empirical approach that estimates damage rates for different classes of buildings present in the local building stock, and then relates fatality rates to the damage rates of each class of buildings. This approach accounts for the effect of the very different types of buildings (by climatic zone, urban or rural location, culture, income level etc), on casualties. The resulting casualty parameters were tested against the overall casualty data from several historical earthquakes in CEQID; a reasonable fit was found.

  2. Early aggressive intraocular pressure lowering, target intraocular pressure, and a novel concept for glaucoma care.

    Science.gov (United States)

    Singh, Kuldev; Shrivastava, Anurag

    2008-11-01

    Early diagnosis of glaucomatous optic nerve damage offers the potential for early treatment which may prevent vision loss from this neurodegenerative disease. Even in patients who do not begin early treatment, early diagnosis allows for better monitoring of disease at a stage where the stakes are lower relative to later stages of the disease. For these reasons, early diagnosis of glaucomatous optic nerve disease is desirable and opens the door for appropriately aggressive therapy. The target intraocular pressure (IOP) concept is widely employed by glaucoma practitioners. Although there have been no randomized clinical trials or other high-quality studies showing the benefits of setting a target IOP versus not using this approach, there is ample evidence that lowering IOP slows glaucoma progression and, in general, lower is better, regardless of disease stage and baseline IOP level. We propose an alternative approach to managing glaucoma without the use of the target IOP concept and suggest that this market IOP concept should be compared with the target IOP approach in an appropriately powered comparative clinical trial.

  3. Financial Literacy; Strategies and Concepts in Understanding the Financial Planning With Self-EfficacyTheory and Goal SettingTheory of Motivation Approach

    OpenAIRE

    Mu’izzuddin, -; Taufik, -; Ghasarma, Reza; Putri, Leonita; Adam, Mohamad

    2017-01-01

    This article discusses the strategies and concepts in understanding the financial literacy with the approach of self-efficacy theory and goal setting theory of motivation. The discussion begins with the concept of behavioral finance that discusses links between financial concepts to the behavior, and then proceed with the concept and measurement of financial literacy of individuals altogether with some approaches and factors that may affect it. Self-efficacy theory and goal setting theory of ...

  4. NDE Evidence for the Damage Arrestment Performance of PRSEUS Composite Cube During High-Pressure Load Test

    Science.gov (United States)

    Johnston, Patrick H.; Parker, F. Raymond

    2013-01-01

    As an approach to light-weight, cost-effective and manufacturable structures required to enable the hybrid wing body aircraft, The Boeing Company, Inc. and NASA have developed the Pultruded Rod Stitched Efficient Unitized Structure (PRSEUS) concept. A PRSEUS pressure cube was developed as a risk reduction test article to examine a new integral cap joint concept as part of a building block approach for technology development of the PRSEUS concept. The overall specimen strength exceeded the 18.4 psi load requirement as testing resulted in the cube reaching a final pressure load of around 48 psi prior to catastrophic failure. The cube pressure test verified that the joints and structure were capable of sustaining the required loads, and represented the first testing of joined PRSEUS structure. This paper will address the damage arrestment performance of the stitched PRSEUS structure. Following catastrophic failure of the cube, ultrasonic pulse-echo inspection found that the localized damage, surrounding a barely-visible impact damage site, did not change noticeably between just after impact and catastrophic failure of the cube, and did not play a role in the catastrophic failure event. Ultrasonic inspection of the remaining intact cube panels presented three basic types of indications: delaminations between laminae parallel to the face sheets, lying between face sheet and tear strap layers, or between tear strap and flange layers; delaminations above the noodles of stringers, frames or integral caps, lying within face sheet or tear strap layers; and delaminations between the laminae in the inner fillets of the integral caps, where pulloff stresses were expected to be highest. Delaminations of all three types were predominantly contained by the first row of stitches encountered. For the small fraction of delaminations extending beyond the first row of stitches, all were contained by the second stitch row.

  5. Exploring In-Service Preschool Teachers' Conceptions of and Approaches to Online Education

    Science.gov (United States)

    Yang, Yu-Fang; Tsai, Chin-Chung

    2017-01-01

    This paper reports on an investigation of adult online learning for 91 Taiwanese in-service preschool teachers enrolled in online degree programs. By using an open-ended written essay to investigate what learners thought they were learning through online education (their conceptions) and how they engaged in online education (their approaches),…

  6. Quasistatic Seismic Damage Indicators for RC Structures from Dissipating Energies in Tangential Subspaces

    Directory of Open Access Journals (Sweden)

    Wilfried B. Krätzig

    2014-01-01

    Full Text Available This paper applies recent research on structural damage description to earthquake-resistant design concepts. Based on the primary design aim of life safety, this work adopts the necessity of additional protection aims for property, installation, and equipment. This requires the definition of damage indicators, which are able to quantify the arising structural damage. As in present design, it applies nonlinear quasistatic (pushover concepts due to code provisions as simplified dynamic design tools. Substituting so nonlinear time-history analyses, seismic low-cycle fatigue of RC structures is approximated in similar manner. The treatment will be embedded into a finite element environment, and the tangential stiffness matrix KT in tangential subspaces then is identified as the most general entry for structural damage information. Its spectra of eigenvalues λi or natural frequencies ωi of the structure serve to derive damage indicators Di, applicable to quasistatic evaluation of seismic damage. Because det KT=0 denotes structural failure, such damage indicators range from virgin situation Di=0 to failure Di=1 and thus correspond with Fema proposals on performance-based seismic design. Finally, the developed concept is checked by reanalyses of two experimentally investigated RC frames.

  7. Comprehensive Review on Divisible Load Theory: Concepts, Strategies, and Approaches

    Directory of Open Access Journals (Sweden)

    Shamsollah Ghanbari

    2014-01-01

    Full Text Available There is extensive literature concerning the divisible load theory. The divisible load theory is mainly applied for scheduling in the area of distributed computing. It is based on the fact that the load can be divided into some arbitrarily independent parts, in which each part can be processed independently by a processor. This paper reviews the literature concerning the divisible load theory, while focusing on the details of the basic concepts, approaches, strategies, typologies, and open problems.

  8. Chemomechanics of Damage Accumulation and Damage-Recovery Healing in Bituminous Asphalt Binders

    NARCIS (Netherlands)

    Pauli, A.T.

    2014-01-01

    As a contribution to the development of mutli-scale multi-physics approaches to modelling pavement performance, the present thesis considers the topic of damage accumulation accompanied by damage recover self-healing of the bituminous asphalt phase of pavement systems. It is found insightful that by

  9. Two-dimensional strain gradient damage modeling: a variational approach

    Science.gov (United States)

    Placidi, Luca; Misra, Anil; Barchiesi, Emilio

    2018-06-01

    In this paper, we formulate a linear elastic second gradient isotropic two-dimensional continuum model accounting for irreversible damage. The failure is defined as the condition in which the damage parameter reaches 1, at least in one point of the domain. The quasi-static approximation is done, i.e., the kinetic energy is assumed to be negligible. In order to deal with dissipation, a damage dissipation term is considered in the deformation energy functional. The key goal of this paper is to apply a non-standard variational procedure to exploit the damage irreversibility argument. As a result, we derive not only the equilibrium equations but, notably, also the Karush-Kuhn-Tucker conditions. Finally, numerical simulations for exemplary problems are discussed as some constitutive parameters are varying, with the inclusion of a mesh-independence evidence. Element-free Galerkin method and moving least square shape functions have been employed.

  10. A linear model of ductile plastic damage

    International Nuclear Information System (INIS)

    Lemaitre, J.

    1983-01-01

    A three-dimensional model of isotropic ductile plastic damage based on a continuum damage variable on the effective stress concept and on thermodynamics is derived. As shown by experiments on several metals and alloys, the model, integrated in the case of proportional loading, is linear with respect to the accumulated plastic strain and shows a large influence of stress triaxiality [fr

  11. Molecular concepts of water splitting. Nature's approach

    International Nuclear Information System (INIS)

    Cox, Nicholas; Lubitz, Wolfgang

    2013-01-01

    Based on studies of natural systems, much has also been learned concerning the design principles required for biomimetic catalysis of water splitting and hydrogen evolution. In summary, these include use of abundant and inexpensive metals, the effective protection of the active sites in functional environments, repair/replacement of active components in case of damage, and the optimization of reaction rates. Biomimetic chemistry aims to mimic all these features; many labs are working toward this goal by developing new approaches in the design and synthesis of such systems, encompassing not only the catalytic center, but also smart matrices and assembly via self-organization. More stable catalysts that do not require self-repair may be obtained from fully artificial (inorganic) catalytic systems that are totally different from the biological ones and only apply some basic principles learned from nature. Metals other than Mn/Ca, Fe, and Ni could be used (e.g. Co) in new ligand spheres and other matrices. For light harvesting, charge separation/stabilization, and the effective coupling of the oxidizing/reducing equivalents to the redox catalysts, different methods have been proposed - for example, covalently linked molecular donor-acceptor systems, photo-voltaic devices, semiconductor-based systems, and photoactive metal complexes. The aim of all these approaches is to develop catalytic systems that split water with sunlight into hydrogen and oxygen while displaying high efficiency and long-term stability. Such a system - either biological, biomimetic, or bioinspired - has the potential to be used on a large scale to produce 'solar fuels' (e.g. hydrogen or secondary products thereof). (orig.)

  12. Proceedings of the workshop. Recognition of DNA damage as onset of successful repair. Computational and experimental approaches

    International Nuclear Information System (INIS)

    Pinak, Miroslav

    2002-03-01

    This was held at The Tokai Research Establishment, Japan Atomic Energy Research Institute, on the 18th and 19th of December 2001. The Laboratory of Radiation Risk Analysis of JAERI organized the workshop. The main subject of the workshop was the DNA damage and its repair. Presented works described the leading experimental as well computational approaches, focusing mainly on the formation of DNA damage, its proliferation, enzymatic recognition and repair, and finally imaging and detection of lesions on a DNA molecule. The 19 of the presented papers are indexed individually. (J.P.N.)

  13. An application of impediography to the high sensitivity and high resolution identification of structural damage

    International Nuclear Information System (INIS)

    Zhao, L; Yang, J; Semperlotti, F; Wang, K W

    2015-01-01

    In this study we explore the use of impediographic techniques to perform damage detection in plate-like metal structures. Impediography relies on the piezo-resistive coupling of the host structure to reconstruct high sensitivity and high resolution maps of the internal electrical conductivity. By exploiting localized strain perturbations generated via focused acoustic waves, the piezo-resistive coupling allows extracting a set of linearly independent boundary voltage data that drastically reduces the ill-conditioning of the inverse problem, therefore increasing the performance. The localized perturbation is achieved by leveraging the concept of frequency selective structure (FSS), that is a dynamically tailored structural element enabling the required acoustic focusing via vibration localization. Based on the FSS approach, the impediographic technique is numerically tested to investigate the performance of the combined approach for structural damage detection. The effects of practical implementation issues, such as limited perturbations and limited boundary data, are also explored. (paper)

  14. Interpreting structural damage in masonry: Diagnostic tool and approach

    NARCIS (Netherlands)

    Vent, A.E. de; Rots, J.G.; Hees, R.P.J. van

    2013-01-01

    A sound diagnosis can only be reached starting from a correct interpretation of the damage. This is not always an easy task: symptoms may be misunderstood, alternative hypotheses overlooked, and the context of the damage left unconsidered. This paper aims to offer architects, contractors and

  15. METHOD FOR SELECTION OF PROJECT MANAGEMENT APPROACH BASED ON FUZZY CONCEPTS

    Directory of Open Access Journals (Sweden)

    Igor V. KONONENKO

    2017-03-01

    Full Text Available Literature analysis of works that devoted to research of the selection a project management approach and development of effective methods for this problem solution is given. Mathematical model and method for selection of project management approach with fuzzy concepts of applicability of existing approaches are proposed. The selection is made of such approaches as the PMBOK Guide, the ISO21500 standard, the PRINCE2 methodology, the SWEBOK Guide, agile methodologies Scrum, XP, and Kanban. The number of project parameters which have a great impact on the result of the selection and measure of their impact is determined. Project parameters relate to information about the project, team, communication, critical project risks. They include the number of people involved in the project, the customer's experience with this project team, the project team's experience in this field, the project team's understanding of requirements, adapting ability, initiative, and others. The suggested method is considered on the example of its application for selection a project management approach to software development project.

  16. A measure of vulnerability and damage tolerance

    International Nuclear Information System (INIS)

    Lind, Niels C.

    1995-01-01

    The purpose of the paper is to present probabilistic definitions of 'vulnerability' and 'damage tolerance'. A new measure of damage is also proposed. Disastrous failures, such as of the Titanic or the Chernobyl reactor, have revealed that some systems can be highly vulnerable. A seemingly insignificant damage can reduce such a system's resistance severely. Attempts to write design code requirements for damage tolerance or structural integrity have not been successful so far. One reason is that these ideas have not been defined with the necessary precision. The suggested definitions aim to be general, applicable to all engineered systems, and readily specializable to particular system types. Vulnerability is defined as the ratio of the failure probability of the damaged system to the failure probability of the undamaged system. It is argued that 'vulnerability' and 'damage tolerance' are complementary concepts. Damage tolerance is defined as the reciprocal of vulnerability. Vulnerability and damage tolerance both concern hypothetical future damage. A damage factor, applicable for the analysis of an existing structure in an assessed state of damage, is defined analogous to vulnerability. Application is illustrated by examples

  17. Comparing the ISO-recommended and the cumulative data-reduction algorithms in S-on-1 laser damage test by a reverse approach method

    Science.gov (United States)

    Zorila, Alexandru; Stratan, Aurel; Nemes, George

    2018-01-01

    We compare the ISO-recommended (the standard) data-reduction algorithm used to determine the surface laser-induced damage threshold of optical materials by the S-on-1 test with two newly suggested algorithms, both named "cumulative" algorithms/methods, a regular one and a limit-case one, intended to perform in some respects better than the standard one. To avoid additional errors due to real experiments, a simulated test is performed, named the reverse approach. This approach simulates the real damage experiments, by generating artificial test-data of damaged and non-damaged sites, based on an assumed, known damage threshold fluence of the target and on a given probability distribution function to induce the damage. In this work, a database of 12 sets of test-data containing both damaged and non-damaged sites was generated by using four different reverse techniques and by assuming three specific damage probability distribution functions. The same value for the threshold fluence was assumed, and a Gaussian fluence distribution on each irradiated site was considered, as usual for the S-on-1 test. Each of the test-data was independently processed by the standard and by the two cumulative data-reduction algorithms, the resulting fitted probability distributions were compared with the initially assumed probability distribution functions, and the quantities used to compare these algorithms were determined. These quantities characterize the accuracy and the precision in determining the damage threshold and the goodness of fit of the damage probability curves. The results indicate that the accuracy in determining the absolute damage threshold is best for the ISO-recommended method, the precision is best for the limit-case of the cumulative method, and the goodness of fit estimator (adjusted R-squared) is almost the same for all three algorithms.

  18. Conceptions of learning and approaches to studying among White and ethnic minority students in distance education.

    Science.gov (United States)

    Richardson, John T E

    2010-12-01

    The attainment of White students at UK institutions of higher education tends to be higher than that of students from other ethnic groups, but the causes of this are unclear. This study compared White students and students from other ethnic groups in their conceptions of learning, their approaches to studying, and their academic attainment. A stratified sample of 1,146 White students and 1,146 students from other ethnic groups taking courses by distance learning with the UK Open University. The Mental Models section of the Inventory of Learning Styles and the Revised Approaches to Studying Inventory were administered in a postal survey. The students' questionnaire scores were contaminated by response bias, which varied across different ethnic groups. When adjusted to control for response bias, the scores on the two questionnaires shared 37.2% of their variance and made a significant contribution to predicting the students' attainment. White students were more likely to exhibit a meaning-directed learning pattern, whereas Asian and Black students were more likely to exhibit a reproduction-directed learning pattern. However, the variation in attainment across different ethnic groups remained significant when their questionnaire scores and prior qualifications were taken into account. There is a strong relationship between students' conceptions of learning and their approaches to studying, and variations in conceptions of learning in different ethnic groups give rise to variations in approaches to studying. However, factors other than prior qualifications and conceptions of learning are responsible for variation in attainment across different ethnic groups.

  19. Safety concerns and suggested design approaches to the HTGR Reformer process concept

    Energy Technology Data Exchange (ETDEWEB)

    Green, R.C.

    1981-09-01

    This report is a safety review of the High Temperature Gas-Cooled Reactor Reformer Application Study prepared by Gas-Cooled Reactor Associates (GCRA) of La Jolla, California. The objective of this review was to identify safety concerns and suggests design approaches to minimize risk in the High Temperature Gas-Cooled Reactor Reformer (HTGR-R) process concept.

  20. Safety concerns and suggested design approaches to the HTGR Reformer process concept

    International Nuclear Information System (INIS)

    Green, R.C.

    1981-09-01

    This report is a safety review of the High Temperature Gas-Cooled Reactor Reformer Application Study prepared by Gas-Cooled Reactor Associates (GCRA) of La Jolla, California. The objective of this review was to identify safety concerns and suggests design approaches to minimize risk in the High Temperature Gas-Cooled Reactor Reformer (HTGR-R) process concept

  1. The Concept Of A Sustainable Approach To Corporate Real Estate Management

    Directory of Open Access Journals (Sweden)

    Ziemba Ewa

    2015-12-01

    Full Text Available This paper is conceptual in nature and presents the assumptions of a holistic approach to corporate real estate management. The approach is based on the imperative of sustainability, which has become a determinant of the proposed Sustainable Corporate Real Estate Management (SCREM model. Moreover, the authors indicate that in addition to the presence of the sustainability imperative, corporate real estate management requires the integration and formalization of knowledge about the concepts of corporate real estate management (CREM with those of corporate social responsibility (CSR. This approach is intended to enable the identification and improvement of real estate management processes and, as a result, contribute to more efficient and effective corporate real estate management and continuous and flexible development of enterprises, as well as boosting economic growth and building prosperity for present and future generations.

  2. Damage methodology approach on a composite panel based on a combination of Fringe Projection and 2D Digital Image Correlation

    Science.gov (United States)

    Felipe-Sesé, Luis; Díaz, Francisco A.

    2018-02-01

    The recent improvement in accessibility to high speed digital cameras has enabled three dimensional (3D) vibration measurements employing full-field optical techniques. Moreover, there is a need to develop a cost-effective and non-destructive testing method to quantify the severity of damages arising from impacts and thus, enhance the service life. This effect is more interesting in composite structures since possible internal damage has low external manifestation. Those possible damages have been previously studied experimentally by using vibration testing. Namely, those analyses were focused on variations in the modal frequencies or, more recently, mode shapes variations employing punctual accelerometers or vibrometers. In this paper it is presented an alternative method to investigate the severity of damage on a composite structure and how the damage affects to its integrity through the analysis of the full field modal behaviour. In this case, instead of punctual measurements, displacement maps are analysed by employing a combination of FP + 2D-DIC during vibration experiments in an industrial component. In addition, to analyse possible mode shape changes, differences between damaged and undamaged specimens are studied by employing a recent methodology based on Adaptive Image Decomposition (AGMD) procedure. It will be demonstrated that AGMD Image decomposition procedure, which decompose the displacement field into shape descriptors, is capable to detect and quantify the differences between mode shapes. As an application example, the proposed approach has been evaluated on two large industrial components (car bonnets) made of short-fibre reinforced composite. Specifically, the evolution of normalized AGMD shape descriptors has been evaluated for three different components with different damage levels. Results demonstrate the potential of the presented approach making it possible to measure the severity of a structural damage by evaluating the mode shape based in

  3. Damage control resuscitation for abdominal war injury

    Directory of Open Access Journals (Sweden)

    Wei-wei DING

    2014-03-01

    Full Text Available In recent years, the concept of comprehensive treatment for military trauma has been comprehensively updated. The application of damage control surgery has significantly improved the clinical outcome of severe abdominal injury. With appropriate surgical intervention, post-trauma fluid resuscitation plays an increasingly important role in the treatment of abdominal injury. The damage control resuscitation strategy addresses the importance of permissive hypotension and haemostatic resuscitation for patients with severe trauma, under the guidance of damage control surgical principle. DOI: 10.11855/j.issn.0577-7402.2014.03.02

  4. Risk assessment concept in the new approach directives and its integration in the Enterprise Risk Management (ERM

    Directory of Open Access Journals (Sweden)

    Đapić Mirko

    2012-03-01

    Full Text Available In the nineties years of the previous century, the European Union achieved, through introducing the New and Global Approach to technical harmonization and standardization, a significant improvement in the approach to conformity assessment of products, by integrating the requirements for technical products safety into the process of its designing. This was achieved by preventive analyzing and quantifying of risk levels in the design process with the objective of determining the scope of the needed safety systems. On the other hand, we have witnessed a rapid development and implementation of holistic approaches to risks management in enterprises, unified in the modern business practice by the name of Enterprise Risk Management (ERM. Going along that line, the paper presents, through the basis of the EU New and Global Approach, the concept of risk assessment in the New Approach directives (Machinery, Lifts, ATEX, etc and provides the concept of its integration into the holistic approach of risks management in enterprises, such as ERM.

  5. Children's conceptions of mental illness: a naïve theory approach.

    Science.gov (United States)

    Fox, Claudine; Buchanan-Barrow, Eithne; Barrett, Martyn

    2010-09-01

    This paper reports two studies that investigated children's conceptions of mental illness using a naïve theory approach, drawing upon a conceptual framework for analysing illness representations which distinguishes between the identity, causes, consequences, curability, and timeline of an illness. The studies utilized semi-structured interviewing and card selection tasks to assess 6- to 11-year-old children's conceptions of the causes and consequences (Study 1) and the curability and timeline (Study 2) of different mental and physical illnesses/ailments. The studies revealed that, at all ages, the children held coherent causal-explanatory ideas about the causes, consequences, curability, and timeline of both mental and physical illnesses/ailments. However, while younger children tended to rely on their knowledge of common physical illnesses when thinking about mental illnesses, providing contagion and contamination explanations of cause, older children demonstrated differences in their thinking about mental and physical illnesses. No substantial gender differences were found in the children's thinking. It is argued that children hold coherent conceptions of mental illness at all ages, but that mental illness only emerges as an ontologically distinct conceptual domain by the end of middle childhood.

  6. Introduction of neutron metrology for reactor radiation damage

    International Nuclear Information System (INIS)

    Alberman, A.; Genthon, J.P.; Schneider, W.; Wright, S.B.; Zijp, W.L.

    1979-01-01

    The background of the procedures for determining irradiation parameters which are of interest in radiation damage experiments is described. The first two chapters outline the concept of damage functions and damage models. The next two chapters give information on methods to determine neutron fluences and neutron spectra. The fifth chapter gives a review of correlation data available for graphite and steels. The last chapter gives guidance how to report the relevant irradiation parameters. Attention is given to the role of the neutron spectrum in deriving values for damage fluence, energy transferred to the lattice, and number of displacements

  7. Natural resource damage assessment

    International Nuclear Information System (INIS)

    Seddelmeyer, J.

    1991-01-01

    The assessment and collection of natural resource damages from petroleum and chemical companies unfortunate enough to have injured publicly owned natural resources is perhaps the most rapidly expanding area of environmental liability. The idea of recovering for injury to publicly owned natural resources is an extension of traditional common law tort concepts under which a person who negligently injures another or his property is called upon to compensate the injured party. Normally, once liability has been established, it is a fairly straightforward matter to calculate the various elements of loss, such as the cost to repair or replace damaged property, or medical expenses, and lost income. More difficult questions, such as the amount to be awarded for pain and suffering or emotional distress, are left to the jury, although courts limit the circumstances in which the jury is permitted to award such damages

  8. CONCEPT OF SUSTAINABILITY – A LOGICAL APPROACH

    Directory of Open Access Journals (Sweden)

    EMIL DINGA

    2011-04-01

    Full Text Available The paper aims to achieve a definition of the concept of sustainability and of sustainable system from a logical perspective. In this respect, it introduces and defines (through the sufficiency predicates the concept of logically vivid system and, on this basis, are discussed a logical concept of sustainability, respectively of a sustainable system in general are discussed and built up. Sustainability is considered in light of identity preservation of the systems, as a static anchor, on one hand, and of the concept of automatic stabilizers as a dynamic anchor on the other side. Finally, the two sufficiency conditions for a logically vivid system be sustainable are identified: the presence of hyper-cycles, respectively the absence of positive feed-back.

  9. Effects of different forms of physiology instruction on the development of students' conceptions of and approaches to science learning.

    Science.gov (United States)

    Lin, Yi-Hui; Liang, Jyh-Chong; Tsai, Chin-Chung

    2012-03-01

    The purpose of this study was to investigate students' conceptions of and approaches to learning science in two different forms: internet-assisted instruction and traditional (face-to-face only) instruction. The participants who took part in the study were 79 college students enrolled in a physiology class in north Taiwan. In all, 46 of the participants were from one class and 33 were from another class. Using a quasi-experimental research approach, the class of 46 students was assigned to be the "internet-assisted instruction group," whereas the class of 33 students was assigned to be the "traditional instruction group." The treatment consisted of a series of online inquiry activities. To explore the effects of different forms of instruction on students' conceptions of and approaches to learning science, two questionnaires were administered before and after the instruction: the Conceptions of Learning Science Questionnaire and the Approaches to Learning Science Questionnaire. Analysis of covariance results revealed that the students in the internet-assisted instruction group showed less agreement than the traditional instruction group in the less advanced conceptions of learning science (such as learning as memorizing and testing). In addition, the internet-assisted instruction group displayed significantly more agreement than the traditional instruction group in more sophisticated conceptions (such as learning as seeing in a new way). Moreover, the internet-assisted instruction group expressed more orientation toward the approaches of deep motive and deep strategy than the traditional instruction group. However, the students in the internet-assisted instruction group also showed more surface motive than the traditional instruction group did.

  10. Probability-based assessment and maintenance of welded joints damaged by fatigue

    International Nuclear Information System (INIS)

    Cremona, C.; Lukic, M.

    1998-01-01

    This paper presents a probabilistic reliability assessment procedure for steel components damaged by fatigue. The study combines the structural reliability theory with a maintenance strategy. The fatigue assessment model is based on a modelisation of the fatigue phenomenon issued from the principles of fracture mechanics theory. The safety margin includes the crack growth propagation and allows to treat fatigue damage in a general manner. Damaging cycles and non damaging cycles are distinguished. The sensitivity study of the different parameters shows that some variables can be taken as deterministic. Applications are made on a welded joint 'stiffener/bottom-plate' of a typical steel bridge. The model is then used for taking into account inspection results. Non destructive inspection (NDI) techniques are also used for updating failure probabilities. The results show their ability to be inserted in a maintenance strategy for optimizing the next inspection time. This has led to define cost functions related to the total maintenance cost; this cost is then minimized for determining the optimal next inspection time. An example of welded joint cracked by fatigue highlights the different concepts. The approach presented in the paper is not only restrained to fatigue problems, but can be applied to a wide variety of degrading phenomena. (orig.)

  11. Delay-active damage versus non-local enhancement for anisotropic damage dynamics computations with alternated loading

    International Nuclear Information System (INIS)

    Desmorat, R.; Chambart, M.; Gatuingt, F.; Guilbaud, D.

    2010-01-01

    Anisotropic damage thermodynamics framework allows to model the concrete-like materials behavior and in particular their dissymmetric tension/compression response. To deal with dynamics applications such as impact, it is furthermore necessary to take into account the strain rate effect observed experimentally. This is done in the present work by means of anisotropic visco-damage, by introducing a material strain rate effect in the cases of positive hydrostatic stresses only. The proposed delay-damage law assumes no viscous effect in compression as the consideration of inertia effects proves sufficient to model the apparent material strength increase. High-rate dynamics applications imply to deal with wave propagation and reflection which can generate alternated loading in the impacted structure. In order to do so, the key concept of active damage is defined and introduced within both the damage criterion and the delay-damage evolution law. At the structural level, strain localization often leads to spurious mesh dependency. Three-dimensional Finite Element computations of dynamic tensile tests by spalling are presented, with visco-damage and either without or with non-local enhancement. Delay-damage, as introduced, regularizes the solution in fast dynamics. The location of the macro-crack initiated is found influenced by non-local regularization. The strain rate range in which each enhancement, delay-damage or non-local enhancement, has a regularizing effect is studied. (authors)

  12. An approach for the modeling of interface-body coupled nonlocal damage

    Directory of Open Access Journals (Sweden)

    J. Toti

    2010-04-01

    Full Text Available Fiber Reinforced Plastic (FRP can be used for strengthening concrete or masonry constructions. One of the main problem in the use of FRP is the possible detachment of the reinforcement from the support material. This paper deals with the modeling of the FRP-concrete or masonry damage interface, accounting for the coupling occurring between the degradation of the cohesive material and the FRP detachment. To this end, a damage model is considered for the quasi-brittle material. In order to prevent strain localization and strong mesh sensitivity of the solution, an integral-type of nonlocal model based on the weighted spatial averaging of a strain-like quantity is developed. Regarding the interface, the damage is governed by the relative displacement occurring at bond. A suitable interface model which accounts for the mode I, mode II and mixed mode of damage is developed. The coupling between the body damage and the interface damage is performed computing the body damage on the bond surface. Numerical examples are presented.

  13. The Concept of Neutrality with Regard to Gender and Religion: A Critique Exemplified by the Approach of Martha Nussbaum

    Directory of Open Access Journals (Sweden)

    Cornelia Mügge

    2015-12-01

    Full Text Available This article is about the meaning and the plausibility of the concept of neutrality with regard to debates on gender and religion in political philosophy. As an example, it takes the Capabilities Approach of Martha Nussbaum, which is particularly instructive as she advocates neutrality between comprehensive doctrines and, at the same time, attends to the challenges posed by gender and religion. Starting from an explanation of the meaning of the concept of neutrality in Nussbaum’s approach, the article focuses on objections against neutrality raised by feminist approaches. It discusses Nussbaum’s defence of neutrality and asks whether it is convincing or not, and to what extent. The article suggests a differentiation between neutrality as an ideal and the attribution of neutrality to actual political norms. It further argues that, whereas Nussbaum’s approach implies the latter conception, the former better corresponds to the basic norm of equal respect.

  14. A Probabilistic Damage Tolerance Concept for Welded Joints

    DEFF Research Database (Denmark)

    Lassen, T.; Sørensen, John Dalsgaard

    2002-01-01

    The first part of this paper presented the required statistics and stochastic models for reliability analysis of the fatigue fracture of welded plate joints. This present Part 2 suggests a probabilistic damage tolerance supplement to the design S–N curves for welded joints. The goal is to provide......) will have the same reliability level for the same FDF. This is true at the end of TSL and at earlier stages, i.e. fractions of TSL. The absolute value of TSL is immaterial for a given FDF. In the case of in-service inspection, the inspection interval is also given without dimensions as a fraction of TSL...

  15. Comparison of Science-Technology-Society Approach and Textbook Oriented Instruction on Students' Abilities to Apply Science Concepts

    Science.gov (United States)

    Kapici, Hasan Ozgur; Akcay, Hakan; Yager, Robert E.

    2017-01-01

    It is important for students to learn concepts and using them for solving problems and further learning. Within this respect, the purpose of this study is to investigate students' abilities to apply science concepts that they have learned from Science-Technology-Society based approach or textbook oriented instruction. Current study is based on…

  16. Evaluation of Continuous Membrane Chromatography Concepts with an Enhanced Process Simulation Approach

    Directory of Open Access Journals (Sweden)

    Steffen Zobel-Roos

    2018-03-01

    Full Text Available Modern biopharmaceutical products strive for small-scale, low-cost production. Continuous chromatography has shown to be a promising technology because it assures high-capacity utilization, purity and yield increases, and lower facility footprint. Membrane chromatography is a fully disposable low-cost alternative to bead-based chromatography with minor drawbacks in terms of capacity. Hence, continuous membrane chromatography should have a high potential. The evaluation of continuous processes goes often along with process modeling. Only few experiments with small feed demand need to be conducted to estimate the model parameters. Afterwards, a variety of different process setups and working points can be analyzed in a very short time, making the approach very efficient. Since the available modeling approaches for membrane chromatography modules did not fit the used design, a new modeling approach is shown. This combines the general rate model with an advanced fluid dynamic distribution. Model parameter determination and model validation were done with industrial cell cultures containing Immunoglobulin G (IgG. The validated model was used to evaluate the feasibility of the integrated Counter Current Chromatography (iCCC concept and the sequential chromatography concept for membrane adsorber modules, starting with a laboratory-type module used for sample preparation. A case study representing a fed-batch reactor with a capacity from 20 to 2000 L was performed. Compared to batch runs, a 71% higher capacity, 48.5% higher productivity, and 38% lower eluent consumption could be achieved.

  17. Influence of Impact Damage on Carbon-Epoxy Stiffener Crippling

    Science.gov (United States)

    Jegley, Dawn C.

    2010-01-01

    NASA, the Air Force Research Laboratory and The Boeing Company have worked to develop new low-cost, light-weight composite structures for aircraft. A Pultruded Rod Stitched Efficient Unitized Structure (PRSEUS) concept has been developed which offers advantages over traditional metallic structure. In this concept a stitched carbon-epoxy material system has been developed with the potential for reducing the weight and cost of transport aircraft structure by eliminating fasteners, thereby reducing part count and labor. By adding unidirectional carbon rods to the top of stiffeners, the panel becomes more structurally efficient. This combination produces a more damage tolerant design. This document describes the results of experimentation on PRSEUS specimens loaded in unidirectional compression subjected to impact damage and loaded in fatigue and to failure. A comparison with analytical predictions for pristine and damaged specimens is included.

  18. PRSEUS Structural Concept Development

    Science.gov (United States)

    Velicki, Alex; Jegley, Dawn

    2014-01-01

    A lighter, more robust airframe is one of the key technological advancements necessary for the successful launch of any large next-generation transport aircraft. Such a premise dictates that considerable improvements beyond current state-of-the-art aluminum structures is needed, and that improvements of this magnitude will require an extensive use of composite materials that are not only lightweight, but also economical to produce. To address this challenge, researchers at NASA and The Boeing Company are developing a novel structural concept called the Pultruded Rod Stitched Efficient Unitized Structure (PRSEUS) under the Environmentally Responsible Aviation (ERA) Project. It is an integrally stiffened panel concept that is stitched together and designed to maintain residual load-carrying capabilities under a variety of damage scenarios. In addition to improved structural performance, an important facet of this unique arrangement of stitched carbon fibers is its innovative manufacturing method that has the potential to lower fabrication costs by eliminating fasteners and autoclave cures. The rationale and development status for this new approach forms the basis of the work described in this paper. The test specimens described herein were fabricated, or are currently being fabricated, by The Boeing Company, while the structural analyses and testing tasks are being performed by NASA and Boeing personnel.

  19. Key concepts in glioblastoma therapy

    DEFF Research Database (Denmark)

    Bartek, Jiri; Ng, Kimberly; Bartek, Jiri

    2012-01-01

    principles that drive the formulation of therapeutic strategies in glioblastoma. Specifically, the concepts of tumour heterogeneity, oncogene addiction, non-oncogene addiction, tumour initiating cells, tumour microenvironment, non-coding sequences and DNA damage response will be reviewed....

  20. Fatigue damage modeling in solder interconnects using a cohesive zone approach

    NARCIS (Netherlands)

    Abdul-Baqi, A.J.J.; Schreurs, P.J.G.; Geers, M.G.D.

    2005-01-01

    The objective of this work is to model the fatigue damage process in a solder bump subjected to cyclic loading conditions. Fatigue damage is simulated using the cohesive zone methodology. Damage is assumed to occur at interfaces modeled through cohesive zones in the material, while the bulk material

  1. Behavior of Frame-Stiffened Composite Panels with Damage

    Science.gov (United States)

    Jegley, Dawn C.

    2013-01-01

    NASA, the Air Force Research Laboratory and The Boeing Company have worked to develop new low-cost, light-weight composite structures for aircraft. A Pultruded Rod Stitched Efficient Unitized Structure (PRSEUS) concept has been developed which offers advantages over traditional metallic structures. In this concept, a stitched carbon-epoxy material system has been developed with the potential for reducing the weight and cost of transport aircraft structure by eliminating fasteners, thereby reducing part count and labor. Stitching and the use of thin skins with rod-stiffeners to move loading away from the morevulnerable outer surface produces a structurally efficient, damage tolerant design. This study focuses on the behavior of PRSEUS panels loaded in the frame direction and subjected to severe damage in the form of a severed central frame in a three-frame panel. Experimental results for a pristine two-frame panel and analytical predictions for pristine two-frame and three-frame panels as well as damaged three-frame panels are described.

  2. Environmental management on the basis of Complex Regional Indicators Concept: case of the Murmansk region

    Science.gov (United States)

    Kozlov, A.; Gutman, S.; Zaychenko, I.; Rytova, E.; Nijinskaya, P.

    2015-09-01

    The article presents an approach to sustainable environmental development of the Murmansk region of the Russian Federation based on the complex regional indicators as a transformation of a balance scorecard method. The peculiarities of Murmansk region connected with sustainable environmental development are described. The complex regional indicators approach allows to elaborate the general concept of complex regional development taking into consideration economic and non-economic factors with the focus on environmental aspects, accumulated environmental damage in particular. General strategic chart of sustainable environmental development of the Murmansk region worked out on the basis of complex regional indicators concept is composed. The key target indicators of sustainable ecological development of the Murmansk region are presented for the following strategic chart components: regional finance; society and market; industry and entrepreneurship; training, development and innovations. These charts are to be integrated with international environmental monitoring systems.

  3. The conservation and development of Myanmar teak bearing forests: an new approach/concept

    International Nuclear Information System (INIS)

    Ker Kelvin Saw

    2001-04-01

    The paper describes that the growing stock and natural regeneration of teak and other valuable commercial species in Myanmar's forests are fast declining due to successional changes in forest types, repeated severe annual forest fires, fuel wood crisis, and over exploitation, thereby necessitating new research approaches and concepts in the treatment of our forests

  4. Advancing Empirical Approaches to the Concept of Resilience: A Critical Examination of Panarchy, Ecological Information, and Statistical Evidence

    Directory of Open Access Journals (Sweden)

    Ali Kharrazi

    2016-09-01

    Full Text Available Despite its ambiguities, the concept of resilience is of critical importance to researchers, practitioners, and policy-makers in dealing with dynamic socio-ecological systems. In this paper, we critically examine the three empirical approaches of (i panarchy; (ii ecological information-based network analysis; and (iii statistical evidence of resilience to three criteria determined for achieving a comprehensive understanding and application of this concept. These criteria are the ability: (1 to reflect a system’s adaptability to shocks; (2 to integrate social and environmental dimensions; and (3 to evaluate system-level trade-offs. Our findings show that none of the three currently applied approaches are strong in handling all three criteria. Panarchy is strong in the first two criteria but has difficulty with normative trade-offs. The ecological information-based approach is strongest in evaluating trade-offs but relies on common dimensions that lead to over-simplifications in integrating the social and environmental dimensions. Statistical evidence provides suggestions that are simplest and easiest to act upon but are generally weak in all three criteria. This analysis confirms the value of these approaches in specific instances but also the need for further research in advancing empirical approaches to the concept of resilience.

  5. Viewing oxidative stress through the lens of oxidative signalling rather than damage.

    Science.gov (United States)

    Foyer, Christine H; Ruban, Alexander V; Noctor, Graham

    2017-03-07

    Concepts of the roles of reactive oxygen species (ROS) in plants and animals have shifted in recent years from focusing on oxidative damage effects to the current view of ROS as universal signalling metabolites. Rather than having two opposing activities, i.e. damage and signalling, the emerging concept is that all types of oxidative modification/damage are involved in signalling, not least in the induction of repair processes. Examining the multifaceted roles of ROS as crucial cellular signals, we highlight as an example the loss of photosystem II function called photoinhibition, where photoprotection has classically been conflated with oxidative damage. © 2017 The Author(s). This is an open access article published by Portland Press Limited on behalf of the Biochemical Society and distributed under the Creative Commons Attribution Licence 4.0 (CC BY).

  6. Damage evaluation system for materials used in fossil thermal power plants

    Energy Technology Data Exchange (ETDEWEB)

    Okamura, Hiroyuki [Science Univ. of Tokyo (Japan); Sakai, Shinsuke [Tokyo Univ. (Japan); Tomita, Akira [Japan Power Engineering and Inspection Corp., Tokyo (Japan); Koyama, Teruo [Babcock Hitachi K.K., Tokyo (Japan); Sakurai, Shigeo; Kawasaki, Yoshiya [Hitachi Ltd., Ibaraki (Japan)

    1998-11-01

    The summary of this research paper is as follows: The fundamental design of the damage evaluation system is carried out based on the basic concept. Prototype systems for boilers and turbines have been constructed: (a) Boiler: (I) Evaluation part: Outer surface of the primary pendant superheater tube; (II) Damage mode: Creep; (III) Damage evaluation method: Hardness measurement method; (b) Turbine: (I) Evaluation part: Inner surface at the center bore of high pressure turbine rotor; (II) Damage mode: Creep; (III) Damage evaluation method: Electric potential method. (orig./MM)

  7. A novel network analysis approach reveals DNA damage, oxidative stress and calcium/cAMP homeostasis-associated biomarkers in frontotemporal dementia

    Science.gov (United States)

    Ferrari, Raffaele; Graziano, Francesca; Novelli, Valeria; Rossi, Giacomina; Galimberti, Daniela; Rainero, Innocenzo; Benussi, Luisa; Nacmias, Benedetta; Bruni, Amalia C.; Cusi, Daniele; Salvi, Erika; Borroni, Barbara; Grassi, Mario

    2017-01-01

    Frontotemporal Dementia (FTD) is the form of neurodegenerative dementia with the highest prevalence after Alzheimer’s disease, equally distributed in men and women. It includes several variants, generally characterized by behavioural instability and language impairments. Although few mendelian genes (MAPT, GRN, and C9orf72) have been associated to the FTD phenotype, in most cases there is only evidence of multiple risk loci with relatively small effect size. To date, there are no comprehensive studies describing FTD at molecular level, highlighting possible genetic interactions and signalling pathways at the origin FTD-associated neurodegeneration. In this study, we designed a broad FTD genetic interaction map of the Italian population, through a novel network-based approach modelled on the concepts of disease-relevance and interaction perturbation, combining Steiner tree search and Structural Equation Model (SEM) analysis. Our results show a strong connection between Calcium/cAMP metabolism, oxidative stress-induced Serine/Threonine kinases activation, and postsynaptic membrane potentiation, suggesting a possible combination of neuronal damage and loss of neuroprotection, leading to cell death. In our model, Calcium/cAMP homeostasis and energetic metabolism impairments are primary causes of loss of neuroprotection and neural cell damage, respectively. Secondly, the altered postsynaptic membrane potentiation, due to the activation of stress-induced Serine/Threonine kinases, leads to neurodegeneration. Our study investigates the molecular underpinnings of these processes, evidencing key genes and gene interactions that may account for a significant fraction of unexplained FTD aetiology. We emphasized the key molecular actors in these processes, proposing them as novel FTD biomarkers that could be crucial for further epidemiological and molecular studies. PMID:29020091

  8. A novel network analysis approach reveals DNA damage, oxidative stress and calcium/cAMP homeostasis-associated biomarkers in frontotemporal dementia.

    Directory of Open Access Journals (Sweden)

    Fernando Palluzzi

    Full Text Available Frontotemporal Dementia (FTD is the form of neurodegenerative dementia with the highest prevalence after Alzheimer's disease, equally distributed in men and women. It includes several variants, generally characterized by behavioural instability and language impairments. Although few mendelian genes (MAPT, GRN, and C9orf72 have been associated to the FTD phenotype, in most cases there is only evidence of multiple risk loci with relatively small effect size. To date, there are no comprehensive studies describing FTD at molecular level, highlighting possible genetic interactions and signalling pathways at the origin FTD-associated neurodegeneration. In this study, we designed a broad FTD genetic interaction map of the Italian population, through a novel network-based approach modelled on the concepts of disease-relevance and interaction perturbation, combining Steiner tree search and Structural Equation Model (SEM analysis. Our results show a strong connection between Calcium/cAMP metabolism, oxidative stress-induced Serine/Threonine kinases activation, and postsynaptic membrane potentiation, suggesting a possible combination of neuronal damage and loss of neuroprotection, leading to cell death. In our model, Calcium/cAMP homeostasis and energetic metabolism impairments are primary causes of loss of neuroprotection and neural cell damage, respectively. Secondly, the altered postsynaptic membrane potentiation, due to the activation of stress-induced Serine/Threonine kinases, leads to neurodegeneration. Our study investigates the molecular underpinnings of these processes, evidencing key genes and gene interactions that may account for a significant fraction of unexplained FTD aetiology. We emphasized the key molecular actors in these processes, proposing them as novel FTD biomarkers that could be crucial for further epidemiological and molecular studies.

  9. Advances and New Concepts in Alcohol-Induced Organelle Stress, Unfolded Protein Responses and Organ Damage

    Directory of Open Access Journals (Sweden)

    Cheng Ji

    2015-06-01

    Full Text Available Alcohol is a simple and consumable biomolecule yet its excessive consumption disturbs numerous biological pathways damaging nearly all organs of the human body. One of the essential biological processes affected by the harmful effects of alcohol is proteostasis, which regulates the balance between biogenesis and turnover of proteins within and outside the cell. A significant amount of published evidence indicates that alcohol and its metabolites directly or indirectly interfere with protein homeostasis in the endoplasmic reticulum (ER causing an accumulation of unfolded or misfolded proteins, which triggers the unfolded protein response (UPR leading to either restoration of homeostasis or cell death, inflammation and other pathologies under severe and chronic alcohol conditions. The UPR senses the abnormal protein accumulation and activates transcription factors that regulate nuclear transcription of genes related to ER function. Similarly, this kind of protein stress response can occur in other cellular organelles, which is an evolving field of interest. Here, I review recent advances in the alcohol-induced ER stress response as well as discuss new concepts on alcohol-induced mitochondrial, Golgi and lysosomal stress responses and injuries.

  10. Modeling the viscoplastic and damage behavior in deep argillaceous rocks

    International Nuclear Information System (INIS)

    Souley, M.; Armand, G.; Su, K.; Ghoreychi, M.

    2011-01-01

    In order to demonstrate the feasibility of a radioactive waste repository in the Callovo-Oxfordian clay-stone formation, the French national radioactive waste management agency (ANDRA) started in 2000 to build an underground research laboratory at Bure (East of France). One of the key issues is to understand long term behavior of the drifts. More than 400 m horizontal galleries at the main level of -490 m have been instrumented since April 2005. The continuous measurements of convergence of the galleries are available, allowing a better understanding of the time-dependent response of the clay-stone at natural scale. Results indicate that the viscoplastic strain rates observed in the undamaged area far from the gallery walls are of the same order of magnitude as those obtained on rock samples, whereas those recorded in the damaged or fractured zone near the gallery walls are one to two orders of magnitude higher, indicating the significant influence of damage or/and macro-fractures on the viscoplastic strains. Based on these observations, a macroscopic viscoplastic model which aims to improve the viscoplastic strain prediction in the EDZ is proposed and implemented in FLAC 3Dc . Both the instantaneous and the time-dependent behavior are considered in the model. The short term response is assumed to be elastoplastic with strain hardening/softening whereas the time-dependent behavior is based on the concepts of visco-plasticity (Lemaitre's model). Finally, the damage-induced viscoplastic strains changes is examined through the plastic deformation (assumed to approach the damage rate).In order to verify both constitutive equations and their implementations, several simulations are performed: (a) triaxial tests at different confining pressures; (b) single- and multi-stage creep tests; (c) relaxation tests with different total axial strain levels, etc. Finally, an example of a blind prediction of the excavation of a drift parallel to the horizontal minor stress,

  11. Detecting Structural Damage of Nuclear Power Plant by Interactive Data Mining Approach

    International Nuclear Information System (INIS)

    Yufei Shu

    2006-01-01

    This paper presents a nonlinear structural damage identification technique, based on an interactive data mining approach, which integrates a human cognitive model in a data mining loop. A mining control agent emulating human analysts is developed, which directly interacts with the data miner, analyzing and verifying the output of the data miner and controlling the data mining process. Additionally, an artificial neural network method, which is adopted as a core component of the proposed interactive data mining method, is evolved by adding a novelty detecting and retraining function for handling complicated nuclear power plant quake-proof data. Plant quake-proof testing data has been applied to the system to show the validation of the proposed method. (author)

  12. Development of damage functions for high-rise building components

    International Nuclear Information System (INIS)

    Kustu, O.; Miller, D.D.; Brokken, S.T.

    1982-10-01

    The component approach for predicting the effects that ground motion from underground nuclear explosions will have on structures involves predicting the damage to each structural and nonstructural component of a building on the basis of the expected local deformation that most affects the damage to the component. This study was conducted to provide the basic data necessary to evaluate the component approach. Available published laboratory test data for various high-rise building components were collected. These data were analyzed statistically to determine damage threshold values and their variabilities, which in turn were used to derive component damage functions. The portion of construction costs attributable to various building components was determined statistically. This information was needed because component damage functions define damage as a percentage of the replacement values of the component, and, in order to calculate the overall building damage factor, the relative cost of each component must be estimated. The feasibility of the component approach to damage prediction is demonstrated. It is recommended that further experimental research directed towards developing an adequate data base of component damage thresholds for all significant building components should be encouraged. Parallel to this effort, detailed damage data from specific buildings damaged in earthquakes should be collected to verify the theoretical procedure

  13. Damage control in orthopedics and traumatology

    International Nuclear Information System (INIS)

    Martinez R, Alfredo

    2006-01-01

    The damage control allows the clinician to institute a rapid process that avoids early death from over aggressive treatment of an injury and lack of attention to the underlying physiological state of victim. This concept allows rapid control and support of the patients underlying physiological condition in an attempt to avoid the triad of death: bleeding, hypothermia and metabolic acidosis. We revised the several indications to damage control in orthopedics in the patients with polytrauma, isolated extremity injury as femur fracture, and the geriatric patients and crane cephalic trauma

  14. Damage Tolerance of Resin Transfer Molded Composite Sandwich Constructions

    National Research Council Canada - National Science Library

    Vaidya, U

    1999-01-01

    .... The sandwich composite concepts considered in this study possessed the feasibility to improve the transverse stiffness, provide enhanced damage resistance/tolerance to impact and functionality...

  15. Civil liability for nuclear damage law

    International Nuclear Information System (INIS)

    1974-01-01

    This Law has as its main objective to regulate civic responsability on damages or injuries that may be brought about by the usage of nuclear reactors and the use of nuclear substances or fuels and their consecuent wastes. The text of this law is consituted by 5 chapters that deal with the following subjects: CHAPTER ONE.- Objective and Definitions. CHAPTER TWO.-On Civic Responsability on Nuclear Damages or Injuries. CHAPTER THREE.- On the Limits of Responsability. CHAPTER FOUR.- On Prescription. CHAPTER FIVE.- General Regulations Concepts such as the following are defined concretely and precisely: Nuclear Accident, Nuclear Damage or Injury, Atomic Energy, Operator of a Nuclear Facility, Nuclear Facility, Radioactive Product or Waste Material, Nuclear Reactor, Nuclear Substances Remittance and Hazardous Nuclear Substance

  16. Assessment of radiation damage - the need for a multi-parametric and integrative approach with the help of both clinical and biological dosimetry

    International Nuclear Information System (INIS)

    Meineke, Viktor

    2008-01-01

    provide the best basis for triage and planning and providing of medical treatment after accidental radiation exposure always different and independent diagnostic procedures integrating all clinical aspects as well as different biological indicators have to be applied. Up to now this multi parametric approach is missing in medical radiation accident management. A new integrative concept is shown and discussed. (author)

  17. Damage control in vascular injury

    NARCIS (Netherlands)

    Leenen, L. P.H.

    2017-01-01

    The highest goal in damage control surgery is to stop the bleeding. Major injuries to the vessels therefore pose the major challenge in the damage control approach. Optimal care can be provided in combination with receiving and treatment rooms with CT, operative and endovascular capabilities. For

  18. The Need to Disentangle Key Concepts from Ecosystem-Approach Jargon

    Science.gov (United States)

    WAYLEN, K A; HASTINGS, E J; BANKS, E A; HOLSTEAD, K L; IRVINE, R J; BLACKSTOCK, K L

    2014-01-01

    The ecosystem approach—as endorsed by the Convention on Biological Diversity (CDB) in 2000—is a strategy for holistic, sustainable, and equitable natural resource management, to be implemented via the 12 Malawi Principles. These principles describe the need to manage nature in terms of dynamic ecosystems, while fully engaging with local peoples. It is an ambitious concept. Today, the term is common throughout the research and policy literature on environmental management. However, multiple meanings have been attached to the term, resulting in confusion. We reviewed references to the ecosystem approach from 1957 to 2012 and identified 3 primary uses: as an alternative to ecosystem management or ecosystem-based management; in reference to an integrated and equitable approach to resource management as per the CBD; and as a term signifying a focus on understanding and valuing ecosystem services. Although uses of this term and its variants may overlap in meaning, typically, they do not entirely reflect the ethos of the ecosystem approach as defined by the CBD. For example, there is presently an increasing emphasis on ecosystem services, but focusing on these alone does not promote decentralization of management or use of all forms of knowledge, both of which are integral to the CBD’s concept. We highlight that the Malawi Principles are at risk of being forgotten. To better understand these principles, more effort to implement them is required. Such efforts should be evaluated, ideally with comparative approaches, before allowing the CBD’s concept of holistic and socially engaged management to be abandoned or superseded. It is possible that attempts to implement all 12 principles together will face many challenges, but they may also offer a unique way to promote holistic and equitable governance of natural resources. Therefore, we believe that the CBD’s concept of the ecosystem approach demands more attention. La Necesidad de Desenredar Conceptos Clave del

  19. Tornadoes and related damage costs: statistical modelling with a semi-Markov approach

    Directory of Open Access Journals (Sweden)

    Guglielmo D’Amico

    2016-09-01

    Full Text Available We propose a statistical approach to modelling for predicting and simulating occurrences of tornadoes and accumulated cost distributions over a time interval. This is achieved by modelling the tornado intensity, measured with the Fujita scale, as a stochastic process. Since the Fujita scale divides tornado intensity into six states, it is possible to model the tornado intensity by using Markov and semi-Markov models. We demonstrate that the semi-Markov approach is able to reproduce the duration effect that is detected in tornado occurrence. The superiority of the semi-Markov model as compared to the Markov chain model is also affirmed by means of a statistical test of hypothesis. As an application, we compute the expected value and the variance of the costs generated by the tornadoes over a given time interval in a given area. The paper contributes to the literature by demonstrating that semi-Markov models represent an effective tool for physical analysis of tornadoes as well as for the estimation of the economic damages to human things.

  20. The application of constructivism to concepts of occupation using a group process approach.

    Science.gov (United States)

    Lederer, J M

    2001-01-01

    Students in an undergraduate occupational therapy program used the concepts of constructivism and the group process to select and decoupage chairs depicting varieties of occupations for one of four life span segments: infancy, adolescence, young adulthood and older adulthood. Students were not provided a set of specific guidelines to follow during the process but constructed their learning according to their creativity and hands-on application of classroom concepts. Student feedback indicated that, while they found the experience challenging, they enjoyed the process and learned a great deal not only about the group process but also about how to approach and solve unfamiliar problems. Results suggest the similarity between principles underlying good education and those underlying occupational performance. Implications for classroom instruction are discussed.

  1. Probabilistic flood damage modelling at the meso-scale

    Science.gov (United States)

    Kreibich, Heidi; Botto, Anna; Schröter, Kai; Merz, Bruno

    2014-05-01

    Decisions on flood risk management and adaptation are usually based on risk analyses. Such analyses are associated with significant uncertainty, even more if changes in risk due to global change are expected. Although uncertainty analysis and probabilistic approaches have received increased attention during the last years, they are still not standard practice for flood risk assessments. Most damage models have in common that complex damaging processes are described by simple, deterministic approaches like stage-damage functions. Novel probabilistic, multi-variate flood damage models have been developed and validated on the micro-scale using a data-mining approach, namely bagging decision trees (Merz et al. 2013). In this presentation we show how the model BT-FLEMO (Bagging decision Tree based Flood Loss Estimation MOdel) can be applied on the meso-scale, namely on the basis of ATKIS land-use units. The model is applied in 19 municipalities which were affected during the 2002 flood by the River Mulde in Saxony, Germany. The application of BT-FLEMO provides a probability distribution of estimated damage to residential buildings per municipality. Validation is undertaken on the one hand via a comparison with eight other damage models including stage-damage functions as well as multi-variate models. On the other hand the results are compared with official damage data provided by the Saxon Relief Bank (SAB). The results show, that uncertainties of damage estimation remain high. Thus, the significant advantage of this probabilistic flood loss estimation model BT-FLEMO is that it inherently provides quantitative information about the uncertainty of the prediction. Reference: Merz, B.; Kreibich, H.; Lall, U. (2013): Multi-variate flood damage assessment: a tree-based data-mining approach. NHESS, 13(1), 53-64.

  2. Quantification of complex DNA damage by ionising radiation. An experimental and theoretical approach

    International Nuclear Information System (INIS)

    Fulford, J.

    2000-05-01

    Ionising radiation potentially produces a broad spectrum of damage in DNA including single and double strand breaks (ssb and dsb) and base damages. It has been hypothesised that sites of complex damage within cellular DNA have particular biological significance due to an associated decreased efficiency in repair. The aim of this study is to gain further understanding of the formation of complex DNA damage. Irradiations of plasmid DNA illustrate that an increase in ionising density of the radiation results in a decrease in ssb yields/Gy but an increase in dsb per ssb, indicative of an increase in the number of complex damage sites per simple isolated damage site. As the mechanism for damage formation shifts from purely indirect at low scavenging capacities to a significant proportion of direct at higher scavenging capacities the proportion of complex damage increases. Comparisons with the yields of ssb and dsb simulated by Monte-Carlo calculations for Al K USX and α-particles also indicate this correspondence. The ionisation density of low energy, secondary electrons produced by photons was assessed experimentally from the dependence of the yield of OH radicals escaping intra-track recombination on photon energy. As energy decreases the OH radical yield initially decreases reflecting an increased ionisation density. However, with further decrease in photon energy the yield of OH radicals increases in line with theoretical calculations. Base damage yields were determined for low and high ionising density radiation over a range of scavenging capacities. As scavenging capacity increases the base damage: ssb ratios increases implying a contribution from electrons to base damage. It is proposed that base damage contributes to DNA damage complexity. Complex damage analysis reveals that at cell mimetic scavenging capacities, 23% and 72% of ssb have an additional spatially close damage site following γ-ray and α-particle irradiation respectively. (author)

  3. Hierarchical fiber-optic-based sensing system: impact damage monitoring of large-scale CFRP structures

    International Nuclear Information System (INIS)

    Minakuchi, Shu; Banshoya, Hidehiko; Takeda, Nobuo; Tsukamoto, Haruka

    2011-01-01

    This study proposes a novel fiber-optic-based hierarchical sensing concept for monitoring randomly induced damage in large-scale composite structures. In a hierarchical system, several kinds of specialized devices are hierarchically combined to form a sensing network. Specifically, numerous three-dimensionally structured sensor devices are distributed throughout the whole structural area and connected with an optical fiber network through transducing mechanisms. The distributed devices detect damage, and the fiber-optic network gathers the damage signals and transmits the information to a measuring instrument. This study began by discussing the basic concept of a hierarchical sensing system through comparison with existing fiber-optic-based systems, and an impact damage detection system was then proposed to validate the new concept. The sensor devices were developed based on comparative vacuum monitoring (CVM), and Brillouin-based distributed strain measurement was utilized to identify damaged areas. Verification tests were conducted step-by-step, beginning with a basic test using a single sensor unit, and, finally, the proposed monitoring system was successfully verified using a carbon fiber reinforced plastic (CFRP) fuselage demonstrator. It was clearly confirmed that the hierarchical system has better repairability, higher robustness, and a wider monitorable area compared to existing systems

  4. OSTEOARTHRITIS: CURRENT CLINICAL CONCEPT AND SOME PROMISING THERAPEUTIC APPROACHES

    Directory of Open Access Journals (Sweden)

    A. E. Karateev

    2018-01-01

    Full Text Available In recent years, there has been a trend toward changing the clinical concept of osteoarthritis (OA. This disease has been considered as an age-related disease and the long-term result of a current pathological process for a very long time. However, many experts are now inclined to consider it necessary to identify the early, pre-X-ray stage of OA, when adequate treatment may not only halt the progression, but also achieve the regression of joint structural changes. This review deals with a number of pathogenetic and clinical aspects of the early stages of OA, which are important for timely diagnosis and pathogenetic therapy choice. It also considers some therapeutic approaches, both a "classic" and recently actively discussed methods for using platelet-rich plasma and autologous chondrocyte transplantation.

  5. Micromechanical modeling of strength and damage of fiber reinforced composites

    Energy Technology Data Exchange (ETDEWEB)

    Mishnaevsky, L. Jr.; Broendsted, P.

    2007-03-15

    The report for the first year of the EU UpWind project includes three parts: overview of concepts and methods of modelling of mechanical behavior, deformation and damage of unidirectional fiber reinforced composites, development of computational tools for the automatic generation of 3D micromechanical models of fiber reinforced composites, and micromechanical modelling of damage in FRC, and phenomenological analysis of the effect of frequency of cyclic loading on the lifetime and damage evolution in materials. (au)

  6. Frequency Response Function Based Damage Identification for Aerospace Structures

    Science.gov (United States)

    Oliver, Joseph Acton

    Structural health monitoring technologies continue to be pursued for aerospace structures in the interests of increased safety and, when combined with health prognosis, efficiency in life-cycle management. The current dissertation develops and validates damage identification technology as a critical component for structural health monitoring of aerospace structures and, in particular, composite unmanned aerial vehicles. The primary innovation is a statistical least-squares damage identification algorithm based in concepts of parameter estimation and model update. The algorithm uses frequency response function based residual force vectors derived from distributed vibration measurements to update a structural finite element model through statistically weighted least-squares minimization producing location and quantification of the damage, estimation uncertainty, and an updated model. Advantages compared to other approaches include robust applicability to systems which are heavily damped, large, and noisy, with a relatively low number of distributed measurement points compared to the number of analytical degrees-of-freedom of an associated analytical structural model (e.g., modal finite element model). Motivation, research objectives, and a dissertation summary are discussed in Chapter 1 followed by a literature review in Chapter 2. Chapter 3 gives background theory and the damage identification algorithm derivation followed by a study of fundamental algorithm behavior on a two degree-of-freedom mass-spring system with generalized damping. Chapter 4 investigates the impact of noise then successfully proves the algorithm against competing methods using an analytical eight degree-of-freedom mass-spring system with non-proportional structural damping. Chapter 5 extends use of the algorithm to finite element models, including solutions for numerical issues, approaches for modeling damping approximately in reduced coordinates, and analytical validation using a composite

  7. Revisiting the Concepts "Approach", "Design" and "Procedure" According to the Richards and Rodgers (2011) Framework

    Science.gov (United States)

    Cumming, Brett

    2012-01-01

    The three concepts Approach, Design and Procedure as proposed in Rodgers' Framework are considered particularly effective as a framework in second language teaching with the specific aim of developing communication as well as for better understanding methodology in the use of communicative language use.

  8. Heat Damaged Forages: Effects on Forage Quality

    Science.gov (United States)

    Traditionally, heat damage in forages has been associated with alterations in forage protein quality as a result of Maillard reactions, and most producers and nutritionists are familiar with this concept. However, this is not necessarily the most important negative consequence of spontaneous heating...

  9. Damage tolerance and structural monitoring for wind turbine blades

    DEFF Research Database (Denmark)

    McGugan, Malcolm; Pereira, Gilmar Ferreira; Sørensen, Bent F.

    2015-01-01

    The paper proposes a methodology for reliable design and maintenance of wind turbine rotor blades using a condition monitoring approach and a damage tolerance index coupling the material and structure. By improving the understanding of material properties that control damage propagation it will b......The paper proposes a methodology for reliable design and maintenance of wind turbine rotor blades using a condition monitoring approach and a damage tolerance index coupling the material and structure. By improving the understanding of material properties that control damage propagation...

  10. Towards a new analytical approach to the challenges of communication difficulties and aquired brain damage in everyday practices

    DEFF Research Database (Denmark)

    Klemmensen, Charlotte Marie Bisgaard

    part of where the participants mainly are persons with acquired brain damage and occupational therapists. I will discuss how a new approach to sense-making practice may be designed in order to study more closely a participants’ perspective in unique situations as they arise. I am interested......The approach of language psychology is grounded in the persons communicating; where as the approach of discursive psychology is grounded in social interaction. There is a lack of scientific knowledge on the social/communicative/interactional challenges of communication difficulties and brain injury...... in everyday life. A sense-making-in-practice approach may help form a new discourse. How may a new analytical approach be designed? May ‘communication’ be described as ‘participation abilities’, using the framework from language psychology combined with discursive psychology and the conventions...

  11. A new integrated micro-macro approach to damage and fracture of composites

    Energy Technology Data Exchange (ETDEWEB)

    Tay, Tong-Earn [Department of Mechanical Engineering, National University of Singapore (NUS), 9 Engineering Drive 1, Singapore 119260 (Singapore)]. E-mail: mpetayte@nus.edu.sg; Tan, Vincent B.C. [Department of Mechanical Engineering, National University of Singapore (NUS), 9 Engineering Drive 1, Singapore 119260 (Singapore); Liu, Guangyan [Department of Mechanical Engineering, National University of Singapore (NUS), 9 Engineering Drive 1, Singapore 119260 (Singapore)

    2006-07-25

    The element-failure method (EFM) is a novel finite element-based method for the modeling of damage, fracture and delamination in fibre-reinforced composite laminates. The nature of damage in composite laminates is generally diffused and complex, characterized by multiple matrix cracks, fibre pullout, fibre breakage and delaminations. It is usually not possible to model or identify crack tips in the conventional fashion of fracture mechanics. The central idea of the EFM, on the other hand, is to model the damaged portions with partially failed elements, whose nodal forces have been modified to take into account the local damage modes. This has the additional benefit of unconditional computational stability compared to other methods such as material property degradation (MPD) models. Here, we present the application of EFM with a recently-proposed failure criterion called the strain invariant failure theory (SIFT) in the prediction of complex damage progression in open-hole tension (OHT) composite laminates, and show that the damage patterns and predicted final failure loads are in very good agreement with experiments.

  12. A new integrated micro-macro approach to damage and fracture of composites

    International Nuclear Information System (INIS)

    Tay, Tong-Earn; Tan, Vincent B.C.; Liu, Guangyan

    2006-01-01

    The element-failure method (EFM) is a novel finite element-based method for the modeling of damage, fracture and delamination in fibre-reinforced composite laminates. The nature of damage in composite laminates is generally diffused and complex, characterized by multiple matrix cracks, fibre pullout, fibre breakage and delaminations. It is usually not possible to model or identify crack tips in the conventional fashion of fracture mechanics. The central idea of the EFM, on the other hand, is to model the damaged portions with partially failed elements, whose nodal forces have been modified to take into account the local damage modes. This has the additional benefit of unconditional computational stability compared to other methods such as material property degradation (MPD) models. Here, we present the application of EFM with a recently-proposed failure criterion called the strain invariant failure theory (SIFT) in the prediction of complex damage progression in open-hole tension (OHT) composite laminates, and show that the damage patterns and predicted final failure loads are in very good agreement with experiments

  13. Identification of Structurally Damaged Areas in Airborne Oblique Images Using a Visual-Bag-of-Words Approach

    Directory of Open Access Journals (Sweden)

    Anand Vetrivel

    2016-03-01

    Full Text Available Automatic post-disaster mapping of building damage using remote sensing images is an important and time-critical element of disaster management. The characteristics of remote sensing images available immediately after the disaster are not certain, since they may vary in terms of capturing platform, sensor-view, image scale, and scene complexity. Therefore, a generalized method for damage detection that is impervious to the mentioned image characteristics is desirable. This study aims to develop a method to perform grid-level damage classification of remote sensing images by detecting the damage corresponding to debris, rubble piles, and heavy spalling within a defined grid, regardless of the aforementioned image characteristics. The Visual-Bag-of-Words (BoW is one of the most widely used and proven frameworks for image classification in the field of computer vision. The framework adopts a kind of feature representation strategy that has been shown to be more efficient for image classification—regardless of the scale and clutter—than conventional global feature representations. In this study supervised models using various radiometric descriptors (histogram of gradient orientations (HoG and Gabor wavelets and classifiers (SVM, Random Forests, and Adaboost were developed for damage classification based on both BoW and conventional global feature representations, and tested with four datasets. Those vary according to the aforementioned image characteristics. The BoW framework outperformed conventional global feature representation approaches in all scenarios (i.e., for all combinations of feature descriptors, classifiers, and datasets, and produced an average accuracy of approximately 90%. Particularly encouraging was an accuracy improvement by 14% (from 77% to 91% produced by BoW over global representation for the most complex dataset, which was used to test the generalization capability.

  14. Supervisors' approaches to supervision and how these relate to conceptions of research

    DEFF Research Database (Denmark)

    Kobayashi, Sofie; Grout, Brian William Wilson; Rump, Camilla Østerberg

    how supervision is different or similar to research. Møller Madsen and Winsløw (2009) have investigated researchers' understanding of relations between research and teaching in two disciplines: Mathematics and Physical Geography using Chevallard's anthropological theory of didactics (Chevallard 2006...... are short of empirical studies that can shed light on the relations between supervisors' conceptions of research and their approaches to supervision. This work which lies in the research-teaching nexus arena of doctoral supervision has the potential to provide new insights into supervision by identifying...

  15. Teaching Electronic Literacy A Concepts-Based Approach for School Library Media Specialists

    CERN Document Server

    Craver, Kathleen W

    1997-01-01

    School library media specialists will find this concepts-based approach to teaching electronic literacy an indispensable basic tool for instructing students and teachers. It provides step-by-step instruction on how to find and evaluate needed information from electronic databases and the Internet, how to formulate successful electronic search strategies and retrieve relevant results, and how to interpret and critically analyze search results. The chapters contain a suggested lesson plan and sample assignments for the school library media specialist to use in teaching electronic literacy skills

  16. Comparison of Two Probabilistic Fatigue Damage Assessment Approaches Using Prognostic Performance Metrics

    Directory of Open Access Journals (Sweden)

    Xuefei Guan

    2011-01-01

    Full Text Available In this paper, two probabilistic prognosis updating schemes are compared. One is based on the classical Bayesian approach and the other is based on newly developed maximum relative entropy (MRE approach. The algorithm performance of the two models is evaluated using a set of recently developed prognostics-based metrics. Various uncertainties from measurements, modeling, and parameter estimations are integrated into the prognosis framework as random input variables for fatigue damage of materials. Measures of response variables are then used to update the statistical distributions of random variables and the prognosis results are updated using posterior distributions. Markov Chain Monte Carlo (MCMC technique is employed to provide the posterior samples for model updating in the framework. Experimental data are used to demonstrate the operation of the proposed probabilistic prognosis methodology. A set of prognostics-based metrics are employed to quantitatively evaluate the prognosis performance and compare the proposed entropy method with the classical Bayesian updating algorithm. In particular, model accuracy, precision, robustness and convergence are rigorously evaluated in addition to the qualitative visual comparison. Following this, potential development and improvement for the prognostics-based metrics are discussed in detail.

  17. Introduction to neutron metrology for reactor radiation damage

    International Nuclear Information System (INIS)

    Alberman, A.; Genthon, J.P.; Wright, S.B.; Zijp, W.L.

    1977-01-01

    This document, prepared by members of the Irradiation Damage Subgroup of the Euratom Working Group on Reactor Dosimetry (EWGRD) describes the background of the procedures for determining irradiation parameters which are of interest in radiation damage experiments. The first two chapters outline the concept of damage functions and damge models. The next two chapters give information on methods to determine neutron fluences and neutron spectra. The fifth chapter gives a review of correlation data available for graphite and steels. The last chapter gives guidance how to report the relevant irradiation parameters. Attention is given to the role of the neutron spectrum in deriving values for damage fluence, energy transferred to the lattice, and number of displacements. A suggested list to report data relevant to the irradiation, the instrumentation and the testing of material is included

  18. Damage Detection and Deteriorating Structural Systems

    DEFF Research Database (Denmark)

    Long, Lijia; Thöns, Sebastian; Döhler, Michael

    2017-01-01

    This paper addresses the quantification of the value of damage detection system and algorithm information on the basis of Value of Information (VoI) analysis to enhance the benefit of damage detection information by providing the basis for its optimization before it is performed and implemented....... The approach of the quantification the value of damage detection information builds upon the Bayesian decision theory facilitating the utilization of damage detection performance models, which describe the information and its precision on structural system level, facilitating actions to ensure the structural...... detection information is determined utilizing Bayesian updating. The damage detection performance is described with the probability of indication for different component and system damage states taking into account type 1 and type 2 errors. The value of damage detection information is then calculated...

  19. Design and evaluation of a foam-filled hat-stiffened panel concept for aircraft primary structural applications

    Science.gov (United States)

    Ambur, Damodar R.

    1995-01-01

    A structurally efficient hat-stiffened panel concept that utilizes a structural foam as stiffener core has been designed for aircraft primary structural applications. This stiffener concept utilizes a manufacturing process that can be adapted readily to grid-stiffened structural configurations which possess inherent damage tolerance characteristics due to their multiplicity of load paths. The foam-filled hat-stiffener concept in a prismatically stiffened panel configuration is more efficient than most other stiffened panel configurations in a load range that is typical for both fuselage and wing structures. The prismatically stiffened panel concept investigated here has been designed using AS4/3502 preimpregnated tape and Rohacell foam core and evaluated for its buckling and postbuckling behavior with and without low-speed impact damage. The results from single-stiffener and multi-stiffener specimens suggest that this structural concept responds to loading as anticipated and has good damage tolerance characteristics.

  20. Undergraduate Students' Earth Science Learning: Relationships among Conceptions, Approaches, and Learning Self-Efficacy in Taiwan

    Science.gov (United States)

    Shen, Kuan-Ming; Lee, Min-Hsien; Tsai, Chin-Chung; Chang, Chun-Yen

    2016-01-01

    In the area of science education research, studies have attempted to investigate conceptions of learning, approaches to learning, and self-efficacy, mainly focusing on science in general or on specific subjects such as biology, physics, and chemistry. However, few empirical studies have probed students' earth science learning. This study aimed to…

  1. Experimental evaluation of the primary damage process: neutron energy effects

    Energy Technology Data Exchange (ETDEWEB)

    Goland, A.N.

    1979-01-01

    Experimental evaluation of the neutron energy dependnece of the primary damage stage depends upon a number of theoretical concepts. This state can only be observed after low- or perhaps ambient-temperature, low-fluence irradiations. The primary recoil energy spectrum, which determines the character of the displacement cascades, can be calculated if dosimetry has provided an accurate neutron spectrum. A review of experimental results relating neutron-energy effects shows that damage energy or damage energy cross section has often been a reliable correlation parameter for primary damage state experiments. However, the forthcoming emphasis on higher irradiation temperatures, more complex alloys and microstructural evolution has fostered a search for additional meaningful correlation parameters.

  2. Probabilistic, multi-variate flood damage modelling using random forests and Bayesian networks

    Science.gov (United States)

    Kreibich, Heidi; Schröter, Kai

    2015-04-01

    Decisions on flood risk management and adaptation are increasingly based on risk analyses. Such analyses are associated with considerable uncertainty, even more if changes in risk due to global change are expected. Although uncertainty analysis and probabilistic approaches have received increased attention recently, they are hardly applied in flood damage assessments. Most of the damage models usually applied in standard practice have in common that complex damaging processes are described by simple, deterministic approaches like stage-damage functions. This presentation will show approaches for probabilistic, multi-variate flood damage modelling on the micro- and meso-scale and discuss their potential and limitations. Reference: Merz, B.; Kreibich, H.; Lall, U. (2013): Multi-variate flood damage assessment: a tree-based data-mining approach. NHESS, 13(1), 53-64. Schröter, K., Kreibich, H., Vogel, K., Riggelsen, C., Scherbaum, F., Merz, B. (2014): How useful are complex flood damage models? - Water Resources Research, 50, 4, p. 3378-3395.

  3. Shaped input distributions for structural damage localization

    DEFF Research Database (Denmark)

    Ulriksen, Martin Dalgaard; Bernal, Dionisio; Damkilde, Lars

    2018-01-01

    localization method is cast that operates on the premise of shaping inputs—whose spatial distribution is fixed—by use of a model, such that these inputs, in one structural subdomain at a time, suppress certain steady-state vibration quantities (depending on the type of damage one seeks to interrogate for......). Accordingly, damage is localized when the vibration signature induced by the shaped inputs in the damaged state corresponds to that in the reference state, hereby implying that the approach does not point directly to damage. Instead, it operates with interrogation based on postulated damage patterns...

  4. Exploring teacher's perceptions of concept mapping as a teaching strategy in science: An action research approach

    Science.gov (United States)

    Marks Krpan, Catherine Anne

    In order to promote science literacy in the classroom, students need opportunities in which they can personalize their understanding of the concepts they are learning. Current literature supports the use of concept maps in enabling students to make personal connections in their learning of science. Because they involve creating explicit connections between concepts, concept maps can assist students in developing metacognitive strategies and assist educators in identifying misconceptions in students' thinking. The literature also notes that concept maps can improve student achievement and recall. Much of the current literature focuses primarily on concept mapping at the secondary and university levels, with limited focus on the elementary panel. The research rarely considers teachers' thoughts and ideas about the concept mapping process. In order to effectively explore concept mapping from the perspective of elementary teachers, I felt that an action research approach would be appropriate. Action research enabled educators to debate issues about concept mapping and test out ideas in their classrooms. It also afforded the participants opportunities to explore their own thinking, reflect on their personal journeys as educators and play an active role in their professional development. In an effort to explore concept mapping from the perspective of elementary educators, an action research group of 5 educators and myself was established and met regularly from September 1999 until June 2000. All of the educators taught in the Toronto area. These teachers were interested in exploring how concept mapping could be used as a learning tool in their science classrooms. In summary, this study explores the journey of five educators and myself as we engaged in collaborative action research. This study sets out to: (1) Explore how educators believe concept mapping can facilitate teaching and student learning in the science classroom. (2) Explore how educators implement concept

  5. Damage severity estimation from the global stiffness decrease

    International Nuclear Information System (INIS)

    Nitescu, C; Gillich, G R; Manescu, T; Korka, Z I; Abdel Wahab, M

    2017-01-01

    In actual damage detection methods, localization and severity estimation can be treated separately. The severity is commonly estimated using fracture mechanics approach, with the main disadvantage of involving empirically deduced relations. In this paper, a damage severity estimator based on the global stiffness reduction is proposed. This feature is computed from the deflections of the intact and damaged beam, respectively. The damage is always located where the bending moment achieves maxima. If the damage is positioned elsewhere on the beam, its effect becomes lower, because the stress is produced by a diminished bending moment. It is shown that the global stiffness reduction produced by a crack is the same for all beams with a similar cross-section, regardless of the boundary conditions. One mathematical relation indicating the severity and another indicating the effect of removing damage from the beam. Measurements on damaged beams with different boundary conditions and cross-sections are carried out, and the location and severity are found using the proposed relations. These comparisons prove that the proposed approach can be used to accurately compute the severity estimator. (paper)

  6. Effective elastic properties of damaged isotropic solids

    International Nuclear Information System (INIS)

    Lee, U Sik

    1998-01-01

    In continuum damage mechanics, damaged solids have been represented by the effective elastic stiffness into which local damage is smoothly smeared. Similarly, damaged solids may be represented in terms of effective elastic compliances. By virtue of the effective elastic compliance representation, it may become easier to derive the effective engineering constants of damaged solids from the effective elastic compliances, all in closed form. Thus, in this paper, by using a continuum modeling approach based on both the principle of strain energy equivalence and the equivalent elliptical micro-crack representation of local damage, the effective elastic compliance and effective engineering constants are derived in terms of the undamaged (virgin) elastic properties and a scalar damage variable for both damaged two-and three-dimensional isotropic solids

  7. An immunochemical approach to the study of DNA damage and repair: Technical progress report, August 1, 1986 to July 31, 1987

    International Nuclear Information System (INIS)

    1987-01-01

    Immunochemical methods are being developed to quantitate unique DNA base damages in x-irradiated DNA. The approach is to chemically synthesize modified nucleotides, conjugate them to protein carriers, and use the conjugates as immunogens in rabbits. Several thymine ring saturation or fragmentation products have been chosen as models for pyrimidine radiolysis products. These include thymine glycol, dihydrothymine and urea. The characterized antibodies are used to quantitate DNA damage x-irradiated in vitro and to immunochemically characterize the antibody to dihydrothymine. 12 refs., 1 fig., 1 tab

  8. A New Experimental Approach to Evaluate Plasma-induced Damage in Microcantilever

    Directory of Open Access Journals (Sweden)

    Yuki Nishimori

    2013-09-01

    Full Text Available Plasma  etching,  during  micro-fabrication  processing  is  indispensable  for  fabricating  MEMS  structures.  During  the plasma  processes,  two  major matters,  charged  ions  and  vacuum–ultraviolet  (VUV  irradiation  damage,  take  charge  of reliability  degradation.  The  charged  ions  induce  unwanted  sidewall  etching,  generally  called  as  “notching”,  which causes  degradation  in  brittle  strength.  Furthermore,  the  VUV  irradiation  gives  rise  to  crystal  defects  on  the  etching surface.  To overcome  the  problem,  neutral  beam  etching  (NBE,  which  use  neutral  particles  without  the  VUV irradiation,  has  been  developed.  In  order  to  evaluate  the  effect  of  the  NBE  quantitatively,  we  measured  the  resonance property of a micro-cantilever before and after NBE treatment. The thickness of damage layer (δ times the imaginary part  of  the  complex Young's  modulus  (Eds  were  then  compared,  which  is  a  parameter  of  surface  damage.  Although plasma processes  make the initial surface of cantilevers damaged during their fabrication, the removal of that damage by NBE was confirmed as the reduction in δEds. NBE will realize a damage-free surface for microstructures.

  9. New fatigue damage analysis of complex engineering components based on FEM

    International Nuclear Information System (INIS)

    Ott, W.

    1987-05-01

    A new type of fatigue damage analysis for multiaxial elastoplastic conditions based on a three-dimensional finite element analysis has been developed. The analysis includes the material model after Mroz. The fatigue life evaluation in the critical areas is based on plastic work at these locations. The proposed damage concept can be applied to arbitrary multiaxial stress-strain paths. For the evaluation of the damage cycles in terms of closed stress-strain hysteresis loops are not required. The damage is determined on the basis of uniaxial material data (stress-strain curve, life to crack iniation curve). (orig./HP) [de

  10. The strainrange conversion principle for treating cumulative fatigue damage in the creep range

    Science.gov (United States)

    Manson, S. S.

    1983-01-01

    A formula is derived for combining effects of successive hysteresis loops in the creep range of materials when one loop has excess tensile creep, while the other contains excess compressive creep. The resultant effect resembles single loops involving balanced tensile and compressive creep. The attempt to use the Interaction Damage Rule as a tool in combining loops of non-equal size and complex strainrange content has led to important new concepts useful in future studies of creep-fatigue. It turns out that the Interaction Damage Rule is basically an expression of how a set of hysteresis loops involving only single generic strains can combine to produce the same micromechanistic damage as the loop containing the combined strainranges which it analyzes. Making use of the underlying concept of Strainrange Partitioning that only the strainrange content of a hysteresis loop governs fatigue life, not order of introducing strainranges, a rational derivation of the Interaction Damage Rule is provided, showing also how it can effectively be used to synthesize independent loops and determine both damaging and healing effects.

  11. Molecular concepts of water splitting. Nature's approach

    Energy Technology Data Exchange (ETDEWEB)

    Cox, Nicholas; Lubitz, Wolfgang [Max-Planck-Institut fuer Chemische Energiekonversion, Muelheim an der Ruhr (Germany)

    2013-07-01

    Based on studies of natural systems, much has also been learned concerning the design principles required for biomimetic catalysis of water splitting and hydrogen evolution. In summary, these include use of abundant and inexpensive metals, the effective protection of the active sites in functional environments, repair/replacement of active components in case of damage, and the optimization of reaction rates. Biomimetic chemistry aims to mimic all these features; many labs are working toward this goal by developing new approaches in the design and synthesis of such systems, encompassing not only the catalytic center, but also smart matrices and assembly via self-organization. More stable catalysts that do not require self-repair may be obtained from fully artificial (inorganic) catalytic systems that are totally different from the biological ones and only apply some basic principles learned from nature. Metals other than Mn/Ca, Fe, and Ni could be used (e.g. Co) in new ligand spheres and other matrices. For light harvesting, charge separation/stabilization, and the effective coupling of the oxidizing/reducing equivalents to the redox catalysts, different methods have been proposed - for example, covalently linked molecular donor-acceptor systems, photo-voltaic devices, semiconductor-based systems, and photoactive metal complexes. The aim of all these approaches is to develop catalytic systems that split water with sunlight into hydrogen and oxygen while displaying high efficiency and long-term stability. Such a system - either biological, biomimetic, or bioinspired - has the potential to be used on a large scale to produce 'solar fuels' (e.g. hydrogen or secondary products thereof). (orig.)

  12. Multi-board concept - a scenario based approach for supporting product quality and life cycle oriented design

    DEFF Research Database (Denmark)

    Robotham, Antony John; Hertzum, Morten

    2000-01-01

    This paper will describe the multi-board concept, which is a working approach for supporting life cycle oriented design and product quality. Aspects of this concept include construction of a common working environment where multiple display boards depict scenarios of the product life cycle...... to believe that the multi-board concept promises to be a useful means of communication amongst the design team. We be-lieve that it fosters a thorough understanding of life cycle events, which, in turn, inspires the design of innovative products of the highest quality......., creating a shared quality mindset amongst design-ers, and developing creativity and synthesis in product design. The appropriateness of scenarios for supporting life cycle oriented design will be ar-gued and preliminary results from early experi-mentation will be presented.Initial results lead us...

  13. [Concept analysis of a participatory approach to occupational safety and health].

    Science.gov (United States)

    Yoshikawa, Etsuko

    2013-01-01

    The purpose of this study was to analyze a participatory approach to occupational safety and health, and to examine the possibility of applying the concept to the practice and research of occupational safety and health. According to Rodger's method, descriptive data concerning antecedents, attributes and consequences were qualitatively analyzed. A total of 39 articles were selected for analysis. Attributes with a participatory approach were: "active involvement of both workers and employers", "focusing on action-oriented low-cost and multiple area improvements based on good practices", "the process of emphasis on consensus building", and "utilization of a local network". Antecedents of the participatory approach were classified as: "existing risks at the workplace", "difficulty of occupational safety and health activities", "characteristics of the workplace and workers", and "needs for the workplace". The derived consequences were: "promoting occupational safety and health activities", "emphasis of self-management", "creation of safety and healthy workplace", and "contributing to promotion of quality of life and productivity". A participatory approach in occupational safety and health is defined as, the process of emphasis on consensus building to promote occupational safety and health activities with emphasis on self-management, which focuses on action-oriented low-cost and multiple area improvements based on good practices with active involvement of both workers and employers through utilization of local networks. We recommend that the role of the occupational health professional be clarified and an evaluation framework be established for the participatory approach to promote occupational safety and health activities by involving both workers and employers.

  14. Liability for nuclear damage. An international perspective

    International Nuclear Information System (INIS)

    Lopuski, J.

    1993-01-01

    The book deals with some of the complex issues of liability and compensation for nuclear damage which have been considered in the course of the work of the IAEA concerning the revision of the Vienna Convention on nuclear liability. It presents, in an orderly way, personal reflections of its author based on this experience gathered in years 1989-1992 when participating in this work. Necessarily it contains in some of its parts references to documents of the IAEA Standing Committee on Nuclear Liability; these documents because of their length could not be reproduced. Consequently these parts may be fully intelligible for those who have not participated in or closely followed in Committee's work. The IAEA work on liability for nuclear damage was initiated in the wake of the impact made on the world's public opinion by the Chernobyl incident and its transboundary effects; issues of international state liability and full compensation have been raised. But humanitarian ideas have quickly been confronted with cold calculations of the cost of financial protection for victims and an open unwillingness of some nuclear states the engage their liability; conflict of interests between nuclear and non-nuclear states has been manifested. After three years of discussion no wide consensus could be reached on some basic issues, such as: relationship between international state and civil liability regimes, structures of international legislation, concept of nuclear damage, limits of compensation, role of public funds or jurisdiction. The author presents his approach to these controversial issues, trying to provide at the same time a theoretical outline for the future international legislation on nuclear liability. (author)

  15. Applications of a damage tolerance analysis methodology in aircraft design and production

    Science.gov (United States)

    Woodward, M. R.; Owens, S. D.; Law, G. E.; Mignery, L. A.

    1992-01-01

    Objectives of customer mandated aircraft structural integrity initiatives in design are to guide material selection, to incorporate fracture resistant concepts in the design, to utilize damage tolerance based allowables and planned inspection procedures necessary to enhance the safety and reliability of manned flight vehicles. However, validated fracture analysis tools for composite structures are needed to accomplish these objectives in a timely and economical manner. This paper briefly describes the development, validation, and application of a damage tolerance methodology for composite airframe structures. A closed-form analysis code, entitled SUBLAM was developed to predict the critical biaxial strain state necessary to cause sublaminate buckling-induced delamination extension in an impact damaged composite laminate. An embedded elliptical delamination separating a thin sublaminate from a thick parent laminate is modelled. Predicted failure strains were correlated against a variety of experimental data that included results from compression after impact coupon and element tests. An integrated analysis package was developed to predict damage tolerance based margin-of-safety (MS) using NASTRAN generated loads and element information. Damage tolerance aspects of new concepts are quickly and cost-effectively determined without the need for excessive testing.

  16. Correlation of Students' Brain Types to Their Conceptions of Learning Science and Approaches to Learning Science

    Science.gov (United States)

    Park, Jiyeon; Jeon, Dongryul

    2015-01-01

    The systemizing and empathizing brain type represent two contrasted students' characteristics. The present study investigated differences in the conceptions and approaches to learning science between the systemizing and empathizing brain type students. The instruments are questionnaires on the systematizing and empathizing, questionnaires on the…

  17. Statistical modelling of compression and fatigue damage of unidirectional fiber reinforced composites

    DEFF Research Database (Denmark)

    Mishnaevsky, Leon; Brøndsted, Povl

    2009-01-01

    A statistical computational model of strength and damage of unidirectional carbon fiber reinforced composites under compressive and cyclic compressive loading is presented in this paper. The model is developed on the basis of the Budiansky–Fleck fiber kinking condition, continuum damage mechanics...... concept and the Monte-Carlo method. The effects of fiber misalignment variability, fiber clustering, load sharing rules on the damage in composite are studied numerically. It is demonstrated that the clustering of fibers has a negative effect of the damage resistance of a composite. Further, the static...

  18. Prediction of radiation-related small-bowel damage

    International Nuclear Information System (INIS)

    Potish, R.A.

    1980-01-01

    In order to predict which patients have a high risk for radiation-related small-bowel damage, the concept of the dose-response curve was applied to the predisposing factors (number of previous laparotomies, extent of surgery, thin physique, hypertension, age, cancer stage, number of treatment days, fractionation, and weight change during radiotherapy) present in 92 patients receiving identical radiation doses and volumes This analysis allows an estimate of the probability of complication to be assigned to individual patients. The utility and limitations of the dose-response concept are discussed

  19. Improving Students' Chemical Literacy Levels on Thermochemical and Thermodynamics Concepts through a Context-Based Approach

    Science.gov (United States)

    Cigdemoglu, Ceyhan; Geban, Omer

    2015-01-01

    The aim of this study was to delve into the effect of context-based approach (CBA) over traditional instruction (TI) on students' chemical literacy level related to thermochemical and thermodynamics concepts. Four eleventh-grade classes with 118 students in total taught by two teachers from a public high school in 2012 fall semester were enrolled…

  20. Relational autonomy in informed consent (RAIC) as an ethics of care approach to the concept of informed consent.

    Science.gov (United States)

    Osuji, Peter I

    2018-03-01

    The perspectives of the dominant Western ethical theories, have dominated the concepts of autonomy and informed consent for many years. Recently this dominant understanding has been challenged by ethics of care which, although, also emanates from the West presents a more nuanced concept: relational autonomy, which is more faithful to our human experience. By paying particular attention to relational autonomy, particularity and Process approach to ethical deliberations in ethics of care, this paper seeks to construct a concept of informed consent from the perspective of ethics of care which is here called relational autonomy-in-informed consent (RAIC). Thus, providing a broader theoretical basis for informed consent beyond the usual theoretical perspectives that are particularly Western. Care ethics provides such a broader basis because it appeals to a global perspective that encompasses lessons from other cultures, and this will help to enrich the current ideas of bioethics principles of autonomy and informed consent. This objective will be achieved by exploring the ethics of care emphasis on relationships based on a universal experience of caring; and by contrasting its concept of autonomy as relational with the understanding of autonomy in the approaches of the dominant moral theories that reflect rational, individualistic, and rights-oriented autonomy of the American liberalism.

  1. Biomedical image representation approach using visualness and spatial information in a concept feature space for interactive region-of-interest-based retrieval.

    Science.gov (United States)

    Rahman, Md Mahmudur; Antani, Sameer K; Demner-Fushman, Dina; Thoma, George R

    2015-10-01

    This article presents an approach to biomedical image retrieval by mapping image regions to local concepts where images are represented in a weighted entropy-based concept feature space. The term "concept" refers to perceptually distinguishable visual patches that are identified locally in image regions and can be mapped to a glossary of imaging terms. Further, the visual significance (e.g., visualness) of concepts is measured as the Shannon entropy of pixel values in image patches and is used to refine the feature vector. Moreover, the system can assist the user in interactively selecting a region-of-interest (ROI) and searching for similar image ROIs. Further, a spatial verification step is used as a postprocessing step to improve retrieval results based on location information. The hypothesis that such approaches would improve biomedical image retrieval is validated through experiments on two different data sets, which are collected from open access biomedical literature.

  2. ETHICAL FASHION CONCEPT AND DESIGNERS

    Directory of Open Access Journals (Sweden)

    Pinar GOKLUBERK OZLU

    2015-01-01

    Full Text Available Some problems like rapidly developing industrialization, irregular population growth, environmental pollution and to feel the impact of global warming as seriously, has been giving significant damage to the earth. People has realized that, after polluting to clean is harder than polluting of the measures to be taken before. And again people showed the sensitivity to the environment through different reactions and sanctions, took measures and created the new concepts about the enviroment. "Ethical Fashion" concept was created by the conscious and responsible individuals in the last two decades. However, that are being implemented as a concept is noticeable. Textile and fashion industry cover "Ethical Fashion"; ecological product, working conditions, fair trade and sustainable product are all in that concept. "Ethical Fashion" appeared and developed especially in United Kingdom, the USA and the other European countries. Nowadays, we may see a lot of textile and fashion designers, fabric and clothing collections, fairs and some specific courses at the universities about "Ethical Fashion". In this research contains "Ethical Fashion" concept, it's development processes and fashion designers who is working for this concept at the present time, also the main target is in this research, semtinizing "Ethical Fashion" concept.

  3. Pilot program (proof of concept) to mitigate Phytophthora ramorum at an infested nursery based on a systems approach

    Science.gov (United States)

    Gary Chastagner; Marianne Elliott

    2017-01-01

    The primary purpose of this program was to demonstrate proof of concept of certain mitigation approaches at a repeat P. ramorum-positive nursery site in Washington. Approaches included steam treatment of infested soil areas; creating a gravel “sandwich” above steam-treated and potentially infested soil surfaces; improving drainage systems; required...

  4. Small Launch Vehicle Design Approaches: Clustered Cores Compared with Multi-Stage Inline Concepts

    Science.gov (United States)

    Waters, Eric D.; Beers, Benjamin; Esther, Elizabeth; Philips, Alan; Threet, Grady E., Jr.

    2013-01-01

    In an effort to better define small launch vehicle design options two approaches were investigated from the small launch vehicle trade space. The primary focus was to evaluate a clustered common core design against a purpose built inline vehicle. Both designs focused on liquid oxygen (LOX) and rocket propellant grade kerosene (RP-1) stages with the terminal stage later evaluated as a LOX/methane (CH4) stage. A series of performance optimization runs were done in order to minimize gross liftoff weight (GLOW) including alternative thrust levels, delivery altitude for payload, vehicle length to diameter ratio, alternative engine feed systems, re-evaluation of mass growth allowances, passive versus active guidance systems, and rail and tower launch methods. Additionally manufacturability, cost, and operations also play a large role in the benefits and detriments for each design. Presented here is the Advanced Concepts Office's Earth to Orbit Launch Team methodology and high level discussion of the performance trades and trends of both small launch vehicle solutions along with design philosophies that shaped both concepts. Without putting forth a decree stating one approach is better than the other; this discussion is meant to educate the community at large and let the reader determine which architecture is truly the most economical; since each path has such a unique set of limitations and potential payoffs.

  5. Construction and reconstruction concept in mathematics instruction

    Science.gov (United States)

    Mumu, Jeinne; Charitas Indra Prahmana, Rully; Tanujaya, Benidiktus

    2017-12-01

    The purpose of this paper is to describe two learning activities undertaken by lecturers, so that students can understand a mathematical concept. The mathematical concept studied in this research is the Vector Space in Linear Algebra instruction. Classroom Action Research used as a research method with pre-service mathematics teacher at University of Papua as the research subject. Student participants are divided into two parallel classes, 24 students in regular class, and remedial class consist of 18 students. Both approaches, construct and reconstruction concept, are implemented on both classes. The result shows that concept construction can only be done in regular class while in remedial class, learning with concept construction approach is not able to increase students' understanding on the concept taught. Understanding the concept of a student in a remedial class can only be carried out using the concept reconstruction approach.

  6. Propagation of cracks and damage in non aging linear viscoelastic media

    International Nuclear Information System (INIS)

    Nguyen, S.T.

    2010-01-01

    Most of France's energy is nuclear. The reactor building comprises a internal and external containment. The internal containment is prestressed to limit the flow of leakage in the internal-external space. The prestress decreases during time by the creep of concrete. It may propagate the cracks by the accidental internal pressure. So we define two research problems: propagation of macro-cracks in viscoelastic structure; effective behavior of micro-cracked viscoelastic material. Firstly, we develop a Burger viscoelastic model of concrete with two approaches: numerical and analytical. Then we solve the problem of single cracks in developing thermodynamically the concept of energy release rate. In the third part we develop a viscoelastic model to study the effective behavior of micro-cracked materials in the case without propagation. The problem of propagation of microcracks is then studied by a numerical approach based on the 'representative pattern morphology'. These studies are finally applied to solve the problems of crack propagation and damage of containment under accidental internal pressure. (authors)

  7. The simple solutions concept: a useful approach to estimate deviation from ideality in solvent extraction

    International Nuclear Information System (INIS)

    Sorel, C.; Pacary, V.

    2010-01-01

    The solvent extraction systems devoted to uranium purification from crude ore to spent fuel involve concentrated solutions in which deviation from ideality can not be neglected. The Simple Solution Concept based on the behaviour of isopiestic solutions has been applied to quantify the activity coefficients of metals and acids in the aqueous phase in equilibrium with the organic phase. This approach has been validated on various solvent extraction systems such as trialkylphosphates, malonamides or acidic extracting agents both on batch experiments and counter-current tests. Moreover, this concept has been successfully used to estimate the aqueous density which is useful to quantify the variation of volume and to assess critical parameters such as the number density of nuclides. (author)

  8. Diagnosis and treatment of vascular damage in dementia

    NARCIS (Netherlands)

    Biessels, GJ

    2016-01-01

    This paper provides an overview of cognitive impairment due to vascular brain damage, which is referred to as vascular cognitive impairment (VCI). Over the past decades, we have seen marked progress in detecting VCI, both through maturation of diagnostic concepts and through advances in brain

  9. Lessons that non-scientists can teach us about the concept of energy: a human-centred approach

    Science.gov (United States)

    Leggett, Monica

    2003-03-01

    Energy is not only a core concept in physics but also a major issue in our post-Kyoto world. When using a constructivist approach to teaching, we need to be aware of students' preconceptions. A palette of alternative frameworks, which includes those used by adults within the community, can facilitate this. An exploration of energy issues with non-scientists within the community has generated some relevant insights. Participants' concepts of energy were multifaceted. Most had a strong personal component, but also social, technical and cosmic dimensions. Although many participants were uncomfortable with the terms `renewable' and `sustainable', they clearly articulated the social and technical requirements for a shift away from current fossil fuel dependency. However, the law of conservation of energy, a core belief of physicists, appeared to be totally absent from their concept of energy.

  10. Design of Learning Objects for Concept Learning: Effects of Multimedia Learning Principles and an Instructional Approach

    Science.gov (United States)

    Chiu, Thomas K. F.; Churchill, Daniel

    2016-01-01

    Literature suggests using multimedia learning principles in the design of instructional material. However, these principles may not be sufficient for the design of learning objects for concept learning in mathematics. This paper reports on an experimental study that investigated the effects of an instructional approach, which includes two teaching…

  11. The Facebook influence model: a concept mapping approach.

    Science.gov (United States)

    Moreno, Megan A; Kota, Rajitha; Schoohs, Shari; Whitehill, Jennifer M

    2013-07-01

    Facebook is a popular social media Web site that has been hypothesized to exert potential influence over users' attitudes, intentions, or behaviors. The purpose of this study was to develop a conceptual framework to explain influential aspects of Facebook. This mixed methods study applied concept mapping methodology, a validated five-step method to visually represent complex topics. The five steps comprise preparation, brainstorming, sort and rank, analysis, and interpretation. College student participants were identified using purposeful sampling. The 80 participants had a mean age of 20.5 years, and included 36% males. A total of 169 statements were generated during brainstorming, and sorted into between 6 and 22 groups. The final concept map included 13 clusters. Interpretation data led to grouping of clusters into four final domains, including connection, comparison, identification, and Facebook as an experience. The Facebook Influence Concept Map illustrates key constructs that contribute to influence, incorporating perspectives of older adolescent Facebook users. While Facebook provides a novel lens through which to consider behavioral influence, it can best be considered in the context of existing behavioral theory. The concept map may be used toward development of potential future intervention efforts.

  12. The Facebook Influence Model: A Concept Mapping Approach

    Science.gov (United States)

    Kota, Rajitha; Schoohs, Shari; Whitehill, Jennifer M.

    2013-01-01

    Abstract Facebook is a popular social media Web site that has been hypothesized to exert potential influence over users' attitudes, intentions, or behaviors. The purpose of this study was to develop a conceptual framework to explain influential aspects of Facebook. This mixed methods study applied concept mapping methodology, a validated five-step method to visually represent complex topics. The five steps comprise preparation, brainstorming, sort and rank, analysis, and interpretation. College student participants were identified using purposeful sampling. The 80 participants had a mean age of 20.5 years, and included 36% males. A total of 169 statements were generated during brainstorming, and sorted into between 6 and 22 groups. The final concept map included 13 clusters. Interpretation data led to grouping of clusters into four final domains, including connection, comparison, identification, and Facebook as an experience. The Facebook Influence Concept Map illustrates key constructs that contribute to influence, incorporating perspectives of older adolescent Facebook users. While Facebook provides a novel lens through which to consider behavioral influence, it can best be considered in the context of existing behavioral theory. The concept map may be used toward development of potential future intervention efforts. PMID:23621717

  13. Detection of multiple damages employing best achievable eigenvectors under Bayesian inference

    Science.gov (United States)

    Prajapat, Kanta; Ray-Chaudhuri, Samit

    2018-05-01

    A novel approach is presented in this work to localize simultaneously multiple damaged elements in a structure along with the estimation of damage severity for each of the damaged elements. For detection of damaged elements, a best achievable eigenvector based formulation has been derived. To deal with noisy data, Bayesian inference is employed in the formulation wherein the likelihood of the Bayesian algorithm is formed on the basis of errors between the best achievable eigenvectors and the measured modes. In this approach, the most probable damage locations are evaluated under Bayesian inference by generating combinations of various possible damaged elements. Once damage locations are identified, damage severities are estimated using a Bayesian inference Markov chain Monte Carlo simulation. The efficiency of the proposed approach has been demonstrated by carrying out a numerical study involving a 12-story shear building. It has been found from this study that damage scenarios involving as low as 10% loss of stiffness in multiple elements are accurately determined (localized and severities quantified) even when 2% noise contaminated modal data are utilized. Further, this study introduces a term parameter impact (evaluated based on sensitivity of modal parameters towards structural parameters) to decide the suitability of selecting a particular mode, if some idea about the damaged elements are available. It has been demonstrated here that the accuracy and efficiency of the Bayesian quantification algorithm increases if damage localization is carried out a-priori. An experimental study involving a laboratory scale shear building and different stiffness modification scenarios shows that the proposed approach is efficient enough to localize the stories with stiffness modification.

  14. Developing State Level Approaches under the State Level Concept

    International Nuclear Information System (INIS)

    Budlong Sylvester, K.; Murphy, C.L.; Boyer, B.; Pilat, J.F.

    2015-01-01

    With the pursuit of the State-Level Concept (SLC), the IAEA has sought to further evolve the international safeguards system in a manner which maintains (or improves) the effectiveness of the system in an environment of expanding demands and limited resources. The IAEA must not remain static and should continuously examine its practices to ensure it can capture opportunities for cost reductions while adapting to, and staying ahead of, emerging proliferation challenges. Contemporary safeguards have been focused on assessing the nuclear programme of the State as a whole, rather than on the basis of individual facilities. Since the IAEA's integrated safeguards program, State-level Approaches (SLAs) have been developed that seek to optimally combine the measures provided for by the Additional Protocol with those of traditional safeguards. This process resulted in facility specific approaches that, while making use of a State's broader conclusion, were nonetheless prescriptive. Designing SLAs on a State-by-State basis would avoid the shortcomings of a one-size-fits-all system. It would also enable the effective use of the Agency's information analysis and State evaluation efforts by linking this analysis to safeguards planning efforts. Acquisition Path Analysis (APA), along with the State Evaluation process, can be used to prioritize paths in a State in terms of their attractiveness for proliferation. While taking advantage of all safeguards relevant information, and tailoring safeguards to individual characteristics of the State, paths of the highest priority in all States will necessarily meet the same standard of coverage. Similarly, lower priority paths will have lower performance targets, thereby promoting nondiscrimination. Such an approach would improve understanding of safeguards implementation under the SLC and the rational for safeguards resource allocation. The potential roles for APA and performance targets in SLA development will be reviewed

  15. Sequential projection pursuit for optimised vibration-based damage detection in an experimental wind turbine blade

    Science.gov (United States)

    Hoell, Simon; Omenzetter, Piotr

    2018-02-01

    To advance the concept of smart structures in large systems, such as wind turbines (WTs), it is desirable to be able to detect structural damage early while using minimal instrumentation. Data-driven vibration-based damage detection methods can be competitive in that respect because global vibrational responses encompass the entire structure. Multivariate damage sensitive features (DSFs) extracted from acceleration responses enable to detect changes in a structure via statistical methods. However, even though such DSFs contain information about the structural state, they may not be optimised for the damage detection task. This paper addresses the shortcoming by exploring a DSF projection technique specialised for statistical structural damage detection. High dimensional initial DSFs are projected onto a low-dimensional space for improved damage detection performance and simultaneous computational burden reduction. The technique is based on sequential projection pursuit where the projection vectors are optimised one by one using an advanced evolutionary strategy. The approach is applied to laboratory experiments with a small-scale WT blade under wind-like excitations. Autocorrelation function coefficients calculated from acceleration signals are employed as DSFs. The optimal numbers of projection vectors are identified with the help of a fast forward selection procedure. To benchmark the proposed method, selections of original DSFs as well as principal component analysis scores from these features are additionally investigated. The optimised DSFs are tested for damage detection on previously unseen data from the healthy state and a wide range of damage scenarios. It is demonstrated that using selected subsets of the initial and transformed DSFs improves damage detectability compared to the full set of features. Furthermore, superior results can be achieved by projecting autocorrelation coefficients onto just a single optimised projection vector.

  16. Studies on the strategies of minimizing radiation damage

    Energy Technology Data Exchange (ETDEWEB)

    Chung, Hee Yong; Sohn, Young Sook

    1998-04-01

    We studied on the strategies of minimizing radiation damage in animal system. To this end we studied following areas of research (1) mechanisms involved in bone marrow damage after total body irradiation, (2) extraction of components that are useful in protecting hematopoietic system from radiation damage, (3) cell therapy approach in restoring the damaged tissue, (4) development of radioprotective chemical reagent, and (5) epidemiological study on the population that had been exposed to radiation.

  17. Studies on the strategies of minimizing radiation damage

    International Nuclear Information System (INIS)

    Chung, Hee Yong; Sohn, Young Sook

    1998-04-01

    We studied on the strategies of minimizing radiation damage in animal system. To this end we studied following areas of research 1) mechanisms involved in bone marrow damage after total body irradiation, 2) extraction of components that are useful in protecting hematopoietic system from radiation damage, 3) cell therapy approach in restoring the damaged tissue, 4) development of radioprotective chemical reagent, and 5) epidemiological study on the population that had been exposed to radiation

  18. Psychological resilience: an approach to the concept, theoretical framework and relation with child sexual abuse

    Directory of Open Access Journals (Sweden)

    Cristian Gustavo Pinto-Cortez

    2014-11-01

    Full Text Available Child sexual abuse is a serious public health problem and a violation of human rights from children and adolescents. A prolific research has been developed to determine the magnitude of the problem, psychological effects, risk factors and protective factors. In this context, resilience approach becomes important by explain the mechanisms that promote positive adaptation to adversity. In this paper, it is discussed in the first part, the analysis of the concept of resilience and its various stages of investigation over time. Finally, an integration of this model in understanding and approaching child and adolescent victimization is done.

  19. Micromechanics based framework with second-order damage tensors

    Science.gov (United States)

    Desmorat, R.; Desmorat, B.; Olive, M.; Kolev, B.

    2018-05-01

    The harmonic product of tensors---leading to the concept of harmonic factorization---has been defined in a previous work (Olive et al, 2017). In the practical case of 3D crack density measurements on thin or thick walled structures, this mathematical tool allows us to factorize the harmonic (irreducible) part of the fourth-order damage tensor as an harmonic square: an exact harmonic square in 2D, an harmonic square over the set of so-called mechanically accessible directions for measurements in the 3D case. The corresponding micro-mechanics framework based on second---instead of fourth---order damage tensors is derived. An illustrating example is provided showing how the proposed framework allows for the modeling of the so-called hydrostatic sensitivity up to high damage levels.

  20. Combined BC/MD approach to the evaluation of damage from fast neutrons and its implementation for beryllium irradiation in a fusion reactor

    Science.gov (United States)

    Borodin, V. A.; Vladimirov, P. V.

    2017-12-01

    The determination of primary damage production efficiency in metals irradiated with fast neutrons is a complex problem. Typically, the majority of atoms are displaced from their lattice positions not by neutrons themselves, but by energetic primary recoils, that can produce both single Frenkel pairs and dense localized cascades. Though a number of codes are available for the calculation of displacement damage from fast ions, they commonly use binary collision (BC) approximation, which is unreliable for dense cascades and thus tend to overestimate the number of created displacements. In order to amend the radiation damage predictions, this work suggests a combined approach, where the BC approximation is used for counting single Frenkel pairs only, whereas the secondary recoils able to produce localized dense cascades are stored for later processing, but not followed explicitly. The displacement production in dense cascades is then determined independently from molecular dynamics (MD) simulations. Combining contributions from different calculations, one gets the total number of displacements created by particular neutron spectrum. The approach is applied here to the case of beryllium irradiation in a fusion reactor. Using a relevant calculated energy spectrum of primary knocked-on atoms (PKAs), it is demonstrated that more than a half of the primary point defects (˜150/PKA) is produced by low-energy recoils in the form of single Frenkel pairs. The contribution to the damage from the dense cascades as predicted using the mixed BC/MD scheme, i.e. ˜110/PKA, is remarkably lower than the value deduced from uncorrected SRIM calculations (˜145/PKA), so that in the studied case SRIM tends to overpredict the total primary damage level.

  1. Situation-dependent repair of DNA damage in yeast

    International Nuclear Information System (INIS)

    von Borstel, R.C.; Hastings, P.J.

    1985-01-01

    The concept of channelling of lesions in DNA into defined repair systems has been used to explain many aspects of induced and spontaneous mutation. The channelling hypothesis states that lesions excluded from one repair process will be taken up by another repair process. This is a simplification. The three known modes of repair of damage induced by radiation are not equivalent modes of repair; they are, instead, different solutions to the problem of replacement of damaged molecules with new molecules which have the same informational content as those that were damaged. The mode of repair that is used is the result of the response to the situation in which the damage takes place. Thus, when the most likely mode of repair does not take place, then the situation changes with respect to the repair of the lesion; the lesion may enter the replication fork and be reparable by another route

  2. Mitigation of Oil in Water Column: Concept Development

    Science.gov (United States)

    2016-06-01

    subsea pipeline leaks , or the leaking of oil from tanks after a damaged vessel has sunk to the bottom. Oil arriving at the surface of the water may...i Classification | CG-926 RDC | author | audience | month year Mitigation of Oil in Water Column: Concept Development Distribution...Center. June 2016 Report No. CG-D-03-16 Mitigation of Oil in Water Column: Concept Development ii UNCLAS//Public | CG-926 RDC

  3. [Approach to the relationship between the changes of the content of free zinc in hippocampus and ischemic neuronal damage].

    Science.gov (United States)

    Zhou, Zhu-Juan; Zheng, Jian; He, Ying

    2002-08-01

    To make approach to the relationship between the changes of free zinc and ischemic neuronal damage in hippocampus after forebrain ischemia/reperfusion. The models of forebrain ischemia/reperfusion were established in rats. The contents of free Zn2+ were measured by TSQ fluorescence method. The Zn2+ chelator (CaEDTA) was injected into lateral ventricles in order to evaluate the effect of free Zn2+ on ischemic neuronal damage. (1) Zn2+ fluorescence in the hilus of dentate gyrus, CA3 region and the stratum radiatum and stratum oriens of CA1 decreased slightly at forty-eight hours after reperfusion. From seventy-two hours to ninety-six hour after reperfusion, the decreased fluorescence gradually returned to the normal level, but some fluorescence dots were found in pyramidal neurons of CA1 and the hilus of dentate gyrus. Seven days after reperfusion, all the changes of the fluorescence almost recovered. (2) The cell membrane-impermeable Zn2+ chelator CaEDTA could reduce the intracellular concentration of free Zn2+ and reduced neuronal damage after forebrain ischemia/reperfusion. (1) The synaptic vesicle Zn2+ released and then translocated into postsynaptic neurons after forebrain ischemia/reperfusion and played a role in ischemic neuronal damage. (2) The cell membrane-impermeable chelator CaEDTA could provide neuroprotection.

  4. Flood damage estimation of companies: A comparison of Stage-Damage-Functions and Random Forests

    Science.gov (United States)

    Sieg, Tobias; Kreibich, Heidi; Vogel, Kristin; Merz, Bruno

    2017-04-01

    The development of appropriate flood damage models plays an important role not only for the damage assessment after an event but also to develop adaptation and risk mitigation strategies. So called Stage-Damage-Functions (SDFs) are often applied as a standard approach to estimate flood damage. These functions assign a certain damage to the water depth depending on the use or other characteristics of the exposed objects. Recent studies apply machine learning algorithms like Random Forests (RFs) to model flood damage. These algorithms usually consider more influencing variables and promise to depict a more detailed insight into the damage processes. In addition they provide an inherent validation scheme. Our study focuses on direct, tangible damage of single companies. The objective is to model and validate the flood damage suffered by single companies with SDFs and RFs. The data sets used are taken from two surveys conducted after the floods in the Elbe and Danube catchments in the years 2002 and 2013 in Germany. Damage to buildings (n = 430), equipment (n = 651) as well as goods and stock (n = 530) are taken into account. The model outputs are validated via a comparison with the actual flood damage acquired by the surveys and subsequently compared with each other. This study investigates the gain in model performance with the use of additional data and the advantages and disadvantages of the RFs compared to SDFs. RFs show an increase in model performance with an increasing amount of data records over a comparatively large range, while the model performance of the SDFs is already saturated for a small set of records. In addition, the RFs are able to identify damage influencing variables, which improves the understanding of damage processes. Hence, RFs can slightly improve flood damage predictions and provide additional insight into the underlying mechanisms compared to SDFs.

  5. Continuum damage mechanics: Present state and future trends

    International Nuclear Information System (INIS)

    Chaboche, J.L.

    1987-01-01

    Continuum Damage Mechanics (CDM) has developed since the initial works of Kachanov and Rabotnov. The paper gives a review of its main features, of the present possibilities and of further developments. Several aspects are considered successively: damage definitions and measures, damage growth equations and anisotropy effects, and use of CDM for local approaches of fracture. Various materials, loading conditions and damaging processes are incorporated in the same general framework. Particular attention is given to the possible connections between different definitions of damage, especially between the CDM definition and the information obtained from material science. (orig.)

  6. Smart bioimpedance-controlled craniotomy: Concept and first experiments.

    Science.gov (United States)

    Niesche, Annegret; Müller, Meiko; Ehreiser, Fritz; Teichmann, Daniel; Leonhardt, Steffen; Radermacher, Klaus

    2017-07-01

    Craniotomy is part of many neurosurgical interventions to create surgical access to intracranial structures. The procedure conventionally bears a high risk of unintended dural tears or damage of the soft tissue underneath the bone. A new synergistically controlled instrument has recently been introduced to address this problem by combining a soft tissue preserving saw with an automatic cutting depth control. Many approaches are known to obtain the information required on the local bone thickness. However, they suffer from unsatisfactory robustness against disturbances occurring during surgery and many approaches require additional intra- or preoperative steps in the workflow. This article presents first concepts for real-time cutting depth control based on in-process bioimpedance measurements. Furthermore, sensor integration into a synergistic surgical device incorporating a bidirectional oscillating saw is demonstrated and evaluated in first feasibility tests on a fresh bovine bone specimen. Results of bipolar measurements show that the transition of different layers of bicortical bone and bone breakthrough lead to characteristic impedance patterns that can be used for process control.

  7. The MEGA BORG: The value of cooperative damage assessment to trustees, PRPs, and the environment

    International Nuclear Information System (INIS)

    Helton, D.

    1993-01-01

    The Natural Resource Damage Assessment (NRDA) process provides natural resource trustees with a method for restoring publicly owned or managed natural resources and their services that are injured as a result of an oil or chemical release. The NRDA process is simple in concept, but provides significant challenges for natural resource trustees. Although the impacts of marine pollution have been studied for many years, the quantification, economic evaluation, and restoration of these impacts brings up controversial scientific, legal, and economic issues. The 1990 MEGA BORG spill in the Gulf of Mexico is an example of a cooperative assessment. Within a few days of the spill, the Texas Water Commission and the National Oceanic and Atmospheric Administration (NOAA) reached and agreement with the owners of the MEGA BORG under which the owners would fund a preliminary assessment of the environmental impact of the spill. Five projects were funded to determine whether there was sufficient injury to justify the completion of a natural resource damage assessment. The MEGA BORG provides an example of a cooperative and scientifically balanced approach to the initiation of damage assessment activities and illustrates the benefits of a cooperative assessment

  8. Normative Values in Teachers' Conceptions of Teaching and Learning in Higher Education: A Belief System Approach

    Science.gov (United States)

    Schwieler, Elias; Ekecrantz, Stefan

    2011-01-01

    The effects of teachers' normative values and emotive reactions on teaching in higher education have received relatively little research attention. The focus is often on descriptive beliefs such as conceptions of teaching and their inter-relations with practice. In this study, which is illustrated by a heuristic model, a belief system approach is…

  9. Basic Definitions and Concepts of Systems Approach, Mathematical Modeling and Information Technologies in Sports Science

    Directory of Open Access Journals (Sweden)

    А. Лопатьєв

    2017-09-01

    Full Text Available The objective is to systematize and adapt the basic definitions and concepts of the systems approach, mathematical modeling and information technologies to sports science. Materials and methods. The research has studied the availability of appropriate terms in shooting sports, which would meet the requirements of modern sports science. It has examined the compliance of the shooting sports training program for children and youth sports schools, the Olympic reserve specialized children and youth schools, schools of higher sports skills, and sports educational institutions with the modern requirements and principles. Research results. The paper suggests the basic definitions adapted to the requirements of technical sports and sports science. The research has thoroughly analyzed the shooting sports training program for children and youth sports schools, the Olympic reserve specialized children and youth schools, schools of higher sports skills, and sports educational institutions. The paper offers options to improve the training program in accordance with the modern tendencies of training athletes.  Conclusions. The research suggests to systematize and adapt the basic definitions and concepts of the systems approach, mathematical modeling and information technologies using the example of technical sports.

  10. H-/H∞ structural damage detection filter design using an iterative linear matrix inequality approach

    International Nuclear Information System (INIS)

    Chen, B; Nagarajaiah, S

    2008-01-01

    The existence of damage in different members of a structure can be posed as a fault detection problem. It is also necessary to isolate structural members in which damage exists, which can be posed as a fault isolation problem. It is also important to detect the time instants of occurrence of the faults/damage. The structural damage detection filter developed in this paper is a model-based fault detection and isolation (FDI) observer suitable for detecting and isolating structural damage. In systems, possible faults, disturbances and noise are coupled together. When system disturbances and sensor noise cannot be decoupled from faults/damage, the detection filter needs to be designed to be robust to disturbances as well as sensitive to faults/damage. In this paper, a new H - /H ∞ and iterative linear matrix inequality (LMI) technique is developed and a new stabilizing FDI filter is proposed, which bounds the H ∞ norm of the transfer function from disturbances to the output residual and simultaneously does not degrade the component of the output residual due to damage. The reduced-order error dynamic system is adopted to form bilinear matrix inequalities (BMIs), then an iterative LMI algorithm is developed to solve the BMIs. The numerical example and experimental verification demonstrate that the proposed algorithm can successfully detect and isolate structural damage in the presence of measurement noise

  11. Damage growth in aerospace composites

    CERN Document Server

    2015-01-01

    This book presents novel methods for the simulation of damage evolution in aerospace composites that will assist in predicting damage onset and growth and thus foster less conservative designs which realize the promised economic benefits of composite materials. The presented integrated numerical/experimental methodologies are capable of taking into account the presence of damage and its evolution in composite structures from the early phases of the design (conceptual design) through to the detailed finite element method analysis and verification phase. The book is based on the GARTEUR Research Project AG-32, which ran from 2007 to 2012, and documents the main results of that project. In addition, the state of the art in European projects on damage evolution in composites is reviewed. While the high specific strength and stiffness of composite materials make them suitable for aerospace structures, their sensitivity to damage means that designing with composites is a challenging task. The new approaches describ...

  12. Development of probabilistic fatigue curve for asphalt concrete based on viscoelastic continuum damage mechanics

    Directory of Open Access Journals (Sweden)

    Himanshu Sharma

    2016-07-01

    Full Text Available Due to its roots in fundamental thermodynamic framework, continuum damage approach is popular for modeling asphalt concrete behavior. Currently used continuum damage models use mixture averaged values for model parameters and assume deterministic damage process. On the other hand, significant scatter is found in fatigue data generated even under extremely controlled laboratory testing conditions. Thus, currently used continuum damage models fail to account the scatter observed in fatigue data. This paper illustrates a novel approach for probabilistic fatigue life prediction based on viscoelastic continuum damage approach. Several specimens were tested for their viscoelastic properties and damage properties under uniaxial mode of loading. The data thus generated were analyzed using viscoelastic continuum damage mechanics principles to predict fatigue life. Weibull (2 parameter, 3 parameter and lognormal distributions were fit to fatigue life predicted using viscoelastic continuum damage approach. It was observed that fatigue damage could be best-described using Weibull distribution when compared to lognormal distribution. Due to its flexibility, 3-parameter Weibull distribution was found to fit better than 2-parameter Weibull distribution. Further, significant differences were found between probabilistic fatigue curves developed in this research and traditional deterministic fatigue curve. The proposed methodology combines advantages of continuum damage mechanics as well as probabilistic approaches. These probabilistic fatigue curves can be conveniently used for reliability based pavement design. Keywords: Probabilistic fatigue curve, Continuum damage mechanics, Weibull distribution, Lognormal distribution

  13. Reconstitution of the cellular response to DNA damage in vitro using damage-activated extracts from mammalian cells

    International Nuclear Information System (INIS)

    Roper, Katherine; Coverley, Dawn

    2012-01-01

    In proliferating mammalian cells, DNA damage is detected by sensors that elicit a cellular response which arrests the cell cycle and repairs the damage. As part of the DNA damage response, DNA replication is inhibited and, within seconds, histone H2AX is phosphorylated. Here we describe a cell-free system that reconstitutes the cellular response to DNA double strand breaks using damage-activated cell extracts and naïve nuclei. Using this system the effect of damage signalling on nuclei that do not contain DNA lesions can be studied, thereby uncoupling signalling and repair. Soluble extracts from G1/S phase cells that were treated with etoposide before isolation, or pre-incubated with nuclei from etoposide-treated cells during an in vitro activation reaction, restrain both initiation and elongation of DNA replication in naïve nuclei. At the same time, H2AX is phosphorylated in naïve nuclei in a manner that is dependent upon the phosphatidylinositol 3-kinase-like protein kinases. Notably, phosphorylated H2AX is not focal in naïve nuclei, but is evident throughout the nucleus suggesting that in the absence of DNA lesions the signal is not amplified such that discrete foci can be detected. This system offers a novel screening approach for inhibitors of DNA damage response kinases, which we demonstrate using the inhibitors wortmannin and LY294002. -- Highlights: ► A cell free system that reconstitutes the response to DNA damage in the absence of DNA lesions. ► Damage-activated extracts impose the cellular response to DNA damage on naïve nuclei. ► PIKK-dependent response impacts positively and negatively on two separate fluorescent outputs. ► Can be used to screen for inhibitors that impact on the response to damage but not on DNA repair. ► LY294002 and wortmannin demonstrate the system's potential as a pathway focused screening approach.

  14. Concepts of scale

    NARCIS (Netherlands)

    Padt, F.J.G.; Arts, B.J.M.

    2014-01-01

    This chapter provides some clarity to the scale debate. It bridges a variety of approaches, definitions and jargons used in various disciplines in order to provide common ground for a concept of scale as a basis for scale-sensitive governance of the environment. The chapter introduces the concept of

  15. Flood vulnerability assessment of residential buildings by explicit damage process modelling

    DEFF Research Database (Denmark)

    Custer, Rocco; Nishijima, Kazuyoshi

    2015-01-01

    The present paper introduces a vulnerability modelling approach for residential buildings in flood. The modelling approach explicitly considers relevant damage processes, i.e. water infiltration into the building, mechanical failure of components in the building envelope and damage from water...

  16. A Tensor-Based Structural Damage Identification and Severity Assessment

    Science.gov (United States)

    Anaissi, Ali; Makki Alamdari, Mehrisadat; Rakotoarivelo, Thierry; Khoa, Nguyen Lu Dang

    2018-01-01

    Early damage detection is critical for a large set of global ageing infrastructure. Structural Health Monitoring systems provide a sensor-based quantitative and objective approach to continuously monitor these structures, as opposed to traditional engineering visual inspection. Analysing these sensed data is one of the major Structural Health Monitoring (SHM) challenges. This paper presents a novel algorithm to detect and assess damage in structures such as bridges. This method applies tensor analysis for data fusion and feature extraction, and further uses one-class support vector machine on this feature to detect anomalies, i.e., structural damage. To evaluate this approach, we collected acceleration data from a sensor-based SHM system, which we deployed on a real bridge and on a laboratory specimen. The results show that our tensor method outperforms a state-of-the-art approach using the wavelet energy spectrum of the measured data. In the specimen case, our approach succeeded in detecting 92.5% of induced damage cases, as opposed to 61.1% for the wavelet-based approach. While our method was applied to bridges, its algorithm and computation can be used on other structures or sensor-data analysis problems, which involve large series of correlated data from multiple sensors. PMID:29301314

  17. Durable ideas in software engineering concepts, methods and approaches from my virtual toolbox

    CERN Document Server

    J Cusick, James

    2013-01-01

    ""Software Engineering now occupies a central place in the development of technology and in the advancement of the economy. From telecommunications to aerospace and from cash registers to medical imaging, software plays a vital and often decisive role in the successful accomplishment of a variety of projects. The creation of software requires a variety of techniques, tools, and especially, properly skilled engineers. This e-book focuses on core concepts and approaches that have proven useful to the author time and time again on many industry projects over a quarter century of research, develo

  18. Dhat syndrome: Evolution of concept, current understanding, and need of an integrated approach

    Directory of Open Access Journals (Sweden)

    Sujita Kumar Kar

    2015-01-01

    Full Text Available Dhat syndrome has often been construed as a culture-bound sexual neurosis of the Indian subcontinent. Symptoms similar to that of Dhat syndrome has been described in other cultures across different time periods. The present paper looks at the evolution of the concept of Dhat syndrome in India. The review also takes an overview of the current understanding of this syndrome in terms of nosological status as a distinct entity and its "culture-bound" status. The narrative finally attempts to discuss the integrated approach for the treatment of this disorder.

  19. Concept and objectives of accident management in LWR type plants

    International Nuclear Information System (INIS)

    Herttrich, P.M.; Hicken, E.F.

    1990-01-01

    For the sake of putting the previous protection and prevention concept in its proper place, it is shown, first of all, on which basis the prevention against damages required according to the state of the art in science and technology was proved under the licensing practice applied so far. Secondly, the previous practice of dynamic upgrading of safety engineering and risk prevention is explained. The introduction of accident management measures is a consequent continuation of this practice. Concrete approaches and objectives of accident management are outlined; an overview of scientific and technical foundations for the development, assessment and introduction of accident management measures is given, and finally the most important organizational and procedural aspects are dealt with. (orig./DG) [de

  20. [Surgical intensive care medicine. Current therapy concepts for septic diseases].

    Science.gov (United States)

    Niederbichler, A D; Ipaktchi, K; Jokuszies, A; Hirsch, T; Altintas, M A; Handschin, A E; Busch, K H; Gellert, M; Steinau, H-U; Vogt, P M; Steinsträsser, L

    2009-10-01

    The clinical appearance of septic disorders is characterized by an enormous dynamic. The sepsis-induced dysbalance of the immune system necessitates immediate and aggressive therapeutic interventions to prevent further damage progression of the disease to septic shock and multiple organ failure. This includes supportive therapy to normalize and maintain organ and tissue perfusion as well as the identification of the infection focus. In cases where an infectious focus is identified, surgical source control frequently is a key element of the treatment strategy besides pharmacologic and supportive measures. The integrative approach of the management of septic patients requires rapid communication between the involved medical disciplines and the nursing personnel. Therefore, this article outlines current therapeutic concepts of septic diseases as well as central nursing aspects.

  1. Astronaut Ross Approaches Assembly Concept for Construction of Erectable Space Structure (ACCESS)

    Science.gov (United States)

    1999-01-01

    The crew assigned to the STS-61B mission included Bryan D. O'Conner, pilot; Brewster H. Shaw, commander; Charles D. Walker, payload specialist; mission specialists Jerry L. Ross, Mary L. Cleave, and Sherwood C. Spring; and Rodolpho Neri Vela, payload specialist. Launched aboard the Space Shuttle Atlantis November 28, 1985 at 7:29:00 pm (EST), the STS-61B mission's primary payload included three communications satellites: MORELOS-B (Mexico); AUSSAT-2 (Australia); and SATCOM KU-2 (RCA Americom). Two experiments were conducted to test assembling erectable structures in space: EASE (Experimental Assembly of Structures in Extravehicular Activity), and ACCESS (Assembly Concept for Construction of Erectable Space Structure). In a joint venture between NASA/Langley Research Center in Hampton, Virginia, and the Marshall Space Flight Center (MSFC), EASE and ACCESS were developed and demonstrated at MSFC's Neutral Buoyancy Simulator (NBS). In this STS-61B onboard photo, astronaut Ross, perched on the Manipulator Foot Restraint (MFR) approaches the erected ACCESS. The primary objective of these experiments was to test the structural assembly concepts for suitability as the framework for larger space structures and to identify ways to improve the productivity of space construction.

  2. Decision making model for Foreign Object Debris/Damage (FOD) elimination in aeronautics using quantitative modeling approach

    Science.gov (United States)

    Lafon, Jose J.

    (FOD) Foreign Object Debris/Damage has been a costly issue for the commercial and military aircraft manufacturers at their production lines every day. FOD can put pilots, passengers and other crews' lives into high-risk. FOD refers to any type of foreign object, particle, debris or agent in the manufacturing environment, which could contaminate/damage the product or otherwise undermine quality standards. Nowadays, FOD is currently addressed with prevention programs, elimination techniques, and designation of FOD areas, controlled access to FOD areas, restrictions of personal items entering designated areas, tool accountability, etc. All of the efforts mentioned before, have not shown a significant reduction in FOD occurrence in the manufacturing processes. This research presents a Decision Making Model approach based on a logistic regression predictive model that was previously made by other researchers. With a general idea of the FOD expected, elimination plans can be put in place and start eradicating the problem minimizing the cost and time spend on the prediction, detection and/or removal of FOD.

  3. Knowledge-Based Energy Damage Model for Evaluating Industrialised Building Systems (IBS Occupational Health and Safety (OHS Risk

    Directory of Open Access Journals (Sweden)

    Abas Nor Haslinda

    2016-01-01

    Full Text Available Malaysia’s construction industry has been long considered hazardous, owing to its poor health and safety record. It is proposed that one of the ways to improve safety and health in the construction industry is through the implementation of ‘off-site’ systems, commonly termed ‘industrialised building systems (IBS’ in Malaysia. This is deemed safer based on the risk concept of reduced exposure, brought about by the reduction in onsite workers; however, no method yet exists for determining the relative safety of various construction methods, including IBS. This study presents a comparative evaluation of the occupational health and safety (OHS risk presented by different construction approaches, namely IBS and traditional methods. The evaluation involved developing a model based on the concept of ‘argumentation theory’, which helps construction designers integrate the management of OHS risk into the design process. In addition, an ‘energy damage model’ was used as an underpinning framework. Development of the model was achieved through three phases, namely Phase I – knowledge acquisitaion, Phase II – argument trees mapping, and Phase III – validation of the model. The research revealed that different approaches/methods of construction projects carried a different level of energy damage, depending on how the activities were carried out. A study of the way in which the risks change from one construction process to another shows that there is a difference in the profile of OHS risk between IBS construction and traditional methods.Therefore, whether the option is an IBS or traditional approach, the fundamental idea of the model is to motivate construction designers or decision-makers to address safety in the design process and encourage them to examine carefully the probable OHS risk variables surrounding an action, thus preventing accidents in construction.

  4. Reappraising the concept of massive transfusion in trauma

    DEFF Research Database (Denmark)

    Stanworth, Simon J; Morris, Timothy P; Gaarder, Christine

    2010-01-01

    ABSTRACT : INTRODUCTION : The massive-transfusion concept was introduced to recognize the dilutional complications resulting from large volumes of packed red blood cells (PRBCs). Definitions of massive transfusion vary and lack supporting clinical evidence. Damage-control resuscitation regimens o...

  5. Adaptive measurement selection for progressive damage estimation

    Science.gov (United States)

    Zhou, Wenfan; Kovvali, Narayan; Papandreou-Suppappola, Antonia; Chattopadhyay, Aditi; Peralta, Pedro

    2011-04-01

    Noise and interference in sensor measurements degrade the quality of data and have a negative impact on the performance of structural damage diagnosis systems. In this paper, a novel adaptive measurement screening approach is presented to automatically select the most informative measurements and use them intelligently for structural damage estimation. The method is implemented efficiently in a sequential Monte Carlo (SMC) setting using particle filtering. The noise suppression and improved damage estimation capability of the proposed method is demonstrated by an application to the problem of estimating progressive fatigue damage in an aluminum compact-tension (CT) sample using noisy PZT sensor measurements.

  6. Damage accumulation in ceramics during ion implantation

    International Nuclear Information System (INIS)

    McHargue, C.J.; Farlow, G.C.; Begun, G.M.; Williams, J.M.; White, C.W.; Appleton, B.R.; Sklad, P.S.; Angelini, P.

    1985-01-01

    The damage structures of α-Al 2 O 3 and α-SiC were examined as functions of ion implantation parameters using Rutherford backscattering-channeling, analytical electron microscopy, and Raman spectroscopy. Low temperatures or high fluences of cations favor formation of the amorphous state. At 300 0 K, mass of the bombarding species has only a small effect on residual damage, but certain ion species appear to stabilize the damage microstructure and increase the rate of approach to the amorphous state. The type of chemical bonding present in the host lattice is an important factor in determining the residual damage state

  7. Probabilistic Assessment of Structural Seismic Damage for Buildings in Mid-America

    International Nuclear Information System (INIS)

    Bai, Jong-Wha; Hueste, Mary Beth D.; Gardoni, Paolo

    2008-01-01

    This paper provides an approach to conduct a probabilistic assessment of structural damage due to seismic events with an application to typical building structures in Mid-America. The developed methodology includes modified damage state classifications based on the ATC-13 and ATC-38 damage states and the ATC-38 database of building damage. Damage factors are assigned to each damage state to quantify structural damage as a percentage of structural replacement cost. To account for the inherent uncertainties, these factors are expressed as random variables with a Beta distribution. A set of fragility curves, quantifying the structural vulnerability of a building, is mapped onto the developed methodology to determine the expected structural damage. The total structural damage factor for a given seismic intensity is then calculated using a probabilistic approach. Prediction and confidence bands are also constructed to account for the prevailing uncertainties. The expected seismic structural damage is assessed for a typical building structure in the Mid-America region using the developed methodology. The developed methodology provides a transparent procedure, where the structural damage factors can be updated as additional seismic damage data becomes available

  8. Enhancement of global flood damage assessments using building material based vulnerability curves

    Science.gov (United States)

    Englhardt, Johanna; de Ruiter, Marleen; de Moel, Hans; Aerts, Jeroen

    2017-04-01

    This study discusses the development of an enhanced approach for flood damage and risk assessments using vulnerability curves that are based on building material information. The approach draws upon common practices in earthquake vulnerability assessments, and is an alternative for land-use or building occupancy approach in flood risk assessment models. The approach is of particular importance for studies where there is a large variation in building material, such as large scale studies or studies in developing countries. A case study of Ethiopia is used to demonstrate the impact of the different methodological approaches on direct damage assessments due to flooding. Generally, flood damage assessments use damage curves for different land-use or occupancy types (i.e. urban or residential and commercial classes). However, these categories do not necessarily relate directly to vulnerability of damage by flood waters. For this, the construction type and building material may be more important, as is used in earthquake risk assessments. For this study, we use building material classification data of the PAGER1 project to define new building material based vulnerability classes for flood damage. This approach will be compared to the widely applied land-use based vulnerability curves such as used by De Moel et al. (2011). The case of Ethiopia demonstrates and compares the feasibility of this novel flood vulnerability method on a country level which holds the potential to be scaled up to a global level. The study shows that flood vulnerability based on building material also allows for better differentiation between flood damage in urban and rural settings, opening doors to better link to poverty studies when such exposure data is available. Furthermore, this new approach paves the road to the enhancement of multi-risk assessments as the method enables the comparison of vulnerability across different natural hazard types that also use material-based vulnerability curves

  9. Legal analysis at the Law for Civil liabilities by nuclear damage

    International Nuclear Information System (INIS)

    Gonzalez G, A.

    2000-01-01

    The present work has the objective to analyse in specific terms the legal regime of the Civil liability by nuclear damage. It has been the intention of that this compilation is the initiation of a large way which awake the interests of jurists and specialists dedicated to study the aspects as the liability by nuclear damage, compensation guarantee, risk and nuclear damage among others. The peaceful applications of the nuclear energy require the necessity of a legal ordinance that it is updated according to the nuclear technology development that the regulations of the common law do not cover. This work is initiated mentioning some antecedents of the nuclear energy law in Mexico. Also is realized the study of the elemental concepts and definitions about the subject as the evolution of the legal figure in the National law frame where the jurist must do an incursion in the nuclear field and make use of scientific and technical terminology. It was analysed and it was made the reflection of the legal figure of liability, its exoneration cases, about the concepts of risk and nuclear damage overcoming the conceptual error among them. It is talked about the study of nuclear damage and its repairing as financial guarantee to compensate to the people injured by a nuclear accident. Finally, it was treated about the legal analysis and proposals of additions and reforms for updating the Nuclear damage liability Law, concluding with general contributions to the Law resulting products of this work. (Author)

  10. Development and anneal of radiation damage in salt

    International Nuclear Information System (INIS)

    Garcia Celma, A.; Donker, H.; Soppe, W.J.; Miralles, L.

    1993-12-01

    Laboratory gamma-irradiations at a constant temperature (100 C) were carried out in two sorts of experiments, one at variable and another at approximately constant dose rates. The damage developed during irradiation was analyzed by thermal analysis, microstructural analysis and small angle neutron scattering. The results were compared with the yields of the Jain-Lidiard model for each experiment. Experiments at a constant dose rate were planned to obtain information on radiation damage development and anneal in conditions as near as possible to those of radioactive waste repository concepts. For this reason the dose rates were kept low. (orig./DG)

  11. Fukunaga-Koontz feature transformation for statistical structural damage detection and hierarchical neuro-fuzzy damage localisation

    Science.gov (United States)

    Hoell, Simon; Omenzetter, Piotr

    2017-07-01

    Considering jointly damage sensitive features (DSFs) of signals recorded by multiple sensors, applying advanced transformations to these DSFs and assessing systematically their contribution to damage detectability and localisation can significantly enhance the performance of structural health monitoring systems. This philosophy is explored here for partial autocorrelation coefficients (PACCs) of acceleration responses. They are interrogated with the help of the linear discriminant analysis based on the Fukunaga-Koontz transformation using datasets of the healthy and selected reference damage states. Then, a simple but efficient fast forward selection procedure is applied to rank the DSF components with respect to statistical distance measures specialised for either damage detection or localisation. For the damage detection task, the optimal feature subsets are identified based on the statistical hypothesis testing. For damage localisation, a hierarchical neuro-fuzzy tool is developed that uses the DSF ranking to establish its own optimal architecture. The proposed approaches are evaluated experimentally on data from non-destructively simulated damage in a laboratory scale wind turbine blade. The results support our claim of being able to enhance damage detectability and localisation performance by transforming and optimally selecting DSFs. It is demonstrated that the optimally selected PACCs from multiple sensors or their Fukunaga-Koontz transformed versions can not only improve the detectability of damage via statistical hypothesis testing but also increase the accuracy of damage localisation when used as inputs into a hierarchical neuro-fuzzy network. Furthermore, the computational effort of employing these advanced soft computing models for damage localisation can be significantly reduced by using transformed DSFs.

  12. Just and reasonable distribution of funds for limited damages in the event of nuclear disasters

    International Nuclear Information System (INIS)

    Schattke, H.

    1985-01-01

    A suggestion is made to make legal dispositions for the distribution of funds before a nuclear event. The concept incorporates the following material-legal elements: Proportionate reduction of damages compensation claims in case the funds for liability and coverage are insufficient; creation of reserve funds for late damage; legal preference of personal damage and only subsequent satisfaction of demand for compensation of nuclear industries. (orig.) [de

  13. The Effect of Concept Mapping-Guided Discovery Integrated Teaching Approach on Chemistry Students' Achievement and Retention

    Science.gov (United States)

    Fatokun, K. V. F.; Eniayeju, P. A.

    2014-01-01

    This study investigates the effects of Concept Mapping-Guided Discovery Integrated Teaching Approach on the achievement and retention of chemistry students. The sample comprised 162 Senior Secondary two (SS 2) students drawn from two Science Schools in Nasarawa State, Central Nigeria with equivalent mean scores of 9.68 and 9.49 in their pre-test.…

  14. Feasibility study of a zone approach concept for the nuclear fuel cycle of Argentina

    International Nuclear Information System (INIS)

    Saavedra, Analia D.; Castro, Laura B.; Mairal, M.L.; Maceiras, Elena; Fernandez Moreno, Sonia; Vicens, Hugo E.; Llacer, Carlos D.; Valentino, Lucia I.

    1999-01-01

    An important part of the nuclear material inventory in Argentina is placed in the nuclear fuel cycle devoted to nuclear power generation, with a high frequency of transfers of such material amongst the nuclear facilities involved. These facilities mostly handle natural uranium. At present, the safeguards systems for these facilities is based on 'Facility Approach' concept. Therefore, for each one of them an independent safeguards approach is applied. However, there are specific procedures that while maintaining or increasing safeguards effectiveness may reduce the inspection resources required in the field. One of these procedures is the 'Zone Approach', by means of which there is a reduction in the need for verifying inventory changes amongst the involved facilities and provides assurance against borrowing of nuclear material within the zone. This paper describes the features of the facilities included in the study, the present safeguards approach applied to them and a feasibility analysis of a zone approach scheme. The comparison between 'facility specific approach' and a 'zone approach' would allow determining whether a reduction of the inspection effort currently applied to fulfil the quantitative safeguards criteria in force for these facilities is obtained. On the other hand, a result showing a relevant reduction on the inspection effort while maintaining safeguards effectiveness would permit to re-orient these resources for an optimum application of the 'Strengthened Safeguards System'. (author)

  15. A phenomenological approach to simulating the evolution of radioactive-waste container damage due to pitting corrosion

    International Nuclear Information System (INIS)

    Henshall, G.A.

    1995-01-01

    The damage to high-level radioactive-waste containers by pitting corrosion is an important design and performance assessment consideration. It is desirable to calculate the evolution of the pit depth distribution, not just the time required for initial penetration of the containers, so that the area available for advective of diffusive release of radionuclides through the container can be estimated. A phenomenological approach for computing the time evolution of these distributions is presented which combines elements of the deterministic and stochastic aspects of pit growth. The consistency of this approach with the mechanisms believed to control the evolution of the pit depth distribution is discussed. Qualitative comparisons of preliminary model predictions with a variety of experimental data from the literature are shown to be generally favorable. The sensitivity of the simulated distributions to changes in the input parameters is discussed. Finally, the results of the current model are compared to those of existing approaches based on extreme-value statistics, particularly regarding the extrapolation of laboratory data to large exposed surface areas

  16. Prevention of damage and 'residual risk' in nuclear power laws

    International Nuclear Information System (INIS)

    Greipl, C.

    1992-01-01

    The concept of prevention of damage within the framework of nuclear power laws includes averting danger for the protection of third parties and preventing risks for the partial protection of third parties with the proviso that still a desire to use the concept 'residual risk' in addition, it should be limited, on the grounds of what can be reasonably expected, to those risks which cannot be reduced any further by the government, i.e. to risks which the public in general and third parties ('actually') must accept. In the future, questions regarding safety systems should be taken into account exclusively withing the context of 'what is necessary for protection against damage in keeping with the latest developments in science and technology' and not at the discretion of the law in denying permission according to Article 7 Paragraph 2 Atomic Energy Law. (orig.) [de

  17. Reappraising the concept of massive transfusion in trauma

    NARCIS (Netherlands)

    Stanworth, Simon J.; Morris, Timothy P.; Gaarder, Christine; Goslings, J. Carel; Maegele, Marc; Cohen, Mitchell J.; König, Thomas C.; Davenport, Ross A.; Pittet, Jean-Francois; Johansson, Pär I.; Allard, Shubha; Johnson, Tony; Brohi, Karim

    2010-01-01

    The massive-transfusion concept was introduced to recognize the dilutional complications resulting from large volumes of packed red blood cells (PRBCs). Definitions of massive transfusion vary and lack supporting clinical evidence. Damage-control resuscitation regimens of modern trauma care are

  18. The prediction of creep damage in Type 347 weld metal: part II creep fatigue tests

    International Nuclear Information System (INIS)

    Spindler, M.W.

    2005-01-01

    Calculations of creep damage under conditions of strain control are often carried out using either a time fraction approach or a ductility exhaustion approach. In part I of this paper the rupture strength and creep ductility data for a Type 347 weld metal were fitted to provide the material properties that are used to calculate creep damage. Part II of this paper examines whether the time fraction approach or the ductility exhaustion approach gives the better predictions of creep damage in creep-fatigue tests on the same Type 347 weld metal. In addition, a new creep damage model, which was developed by removing some of the simplifying assumptions that are made in the ductility exhaustion approach, was used. This new creep damage model is a function of the strain rate, stress and temperature and was derived from creep and constant strain rate test data using a reverse modelling technique (see part I of this paper). It is shown that the new creep damage model gives better predictions of creep damage in the creep-fatigue tests than the time fraction and the ductility exhaustion approaches

  19. Modeling of beam-induced damage of the LHC tertiary collimators

    Directory of Open Access Journals (Sweden)

    E. Quaranta

    2017-09-01

    Full Text Available Modern hadron machines with high beam intensity may suffer from material damage in the case of large beam losses and even beam-intercepting devices, such as collimators, can be harmed. A systematic method to evaluate thresholds of damage owing to the impact of high energy particles is therefore crucial for safe operation and for predicting possible limitations in the overall machine performance. For this, a three-step simulation approach is presented, based on tracking simulations followed by calculations of energy deposited in the impacted material and hydrodynamic simulations to predict the thermomechanical effect of the impact. This approach is applied to metallic collimators at the CERN Large Hadron Collider (LHC, which in standard operation intercept halo protons, but risk to be damaged in the case of extraction kicker malfunction. In particular, tertiary collimators protect the aperture bottlenecks, their settings constrain the reach in β^{*} and hence the achievable luminosity at the LHC experiments. Our calculated damage levels provide a very important input on how close to the beam these collimators can be operated without risk of damage. The results of this approach have been used already to push further the performance of the present machine. The risk of damage is even higher in the upgraded high-luminosity LHC with higher beam intensity, for which we quantify existing margins before equipment damage for the proposed baseline settings.

  20. Modeling of beam-induced damage of the LHC tertiary collimators

    Science.gov (United States)

    Quaranta, E.; Bertarelli, A.; Bruce, R.; Carra, F.; Cerutti, F.; Lechner, A.; Redaelli, S.; Skordis, E.; Gradassi, P.

    2017-09-01

    Modern hadron machines with high beam intensity may suffer from material damage in the case of large beam losses and even beam-intercepting devices, such as collimators, can be harmed. A systematic method to evaluate thresholds of damage owing to the impact of high energy particles is therefore crucial for safe operation and for predicting possible limitations in the overall machine performance. For this, a three-step simulation approach is presented, based on tracking simulations followed by calculations of energy deposited in the impacted material and hydrodynamic simulations to predict the thermomechanical effect of the impact. This approach is applied to metallic collimators at the CERN Large Hadron Collider (LHC), which in standard operation intercept halo protons, but risk to be damaged in the case of extraction kicker malfunction. In particular, tertiary collimators protect the aperture bottlenecks, their settings constrain the reach in β* and hence the achievable luminosity at the LHC experiments. Our calculated damage levels provide a very important input on how close to the beam these collimators can be operated without risk of damage. The results of this approach have been used already to push further the performance of the present machine. The risk of damage is even higher in the upgraded high-luminosity LHC with higher beam intensity, for which we quantify existing margins before equipment damage for the proposed baseline settings.

  1. A multisensor approach for the 2016 Amatrice earthquake damage assessment

    Directory of Open Access Journals (Sweden)

    Vito Romaniello

    2016-11-01

    Full Text Available This work proposes methodologies aimed at evaluating the damage occurred in the Amatrice town by using optical and Synthetic Aperture Radar (SAR change features obtained from satellite images. The objective is to achieve a damage map employing the satellite change features in a classifier algorithm, namely the Features Stepwise Thresholding (FST method. The main novelties of the proposed analysis concern the estimation of derived features at object scale and the exploitation of the unsupervised FST algorithm. A segmentation of the study area into several buildings blocks has been done by considering a set of polygons, over the Amatrice town, extracted from the open source Open Street Map (OSM geo-database. The available satellite dataset is composed of several optical and SAR images, collected before and after the seismic event. Regarding the optical data, we selected the Normalised Difference Index (NDI, and two quantities coming from the Information Theory, namely the Kullback-Libler Divergence (KLD and the Mutual Information (MI. In addition, for the SAR data we picked out the Intensity Correlation Difference (ICD and the KLD parameter. The exploitation of these features in the FST algorithm permits to obtain a plausible damage map that is able to indicate the most affected areas.

  2. Similarity-based recommendation of new concepts to a terminology

    NARCIS (Netherlands)

    Chandar, Praveen; Yaman, Anil; Hoxha, Julia; He, Zhe; Weng, Chunhua

    2015-01-01

    Terminologies can suffer from poor concept coverage due to delays in addition of new concepts. This study tests a similarity-based approach to recommending concepts from a text corpus to a terminology. Our approach involves extraction of candidate concepts from a given text corpus, which are

  3. CFC/Cu bond damage in actively cooled plasma facing components

    International Nuclear Information System (INIS)

    Schlosser, J; Martin, E; Henninger, C; Boscary, J; Camus, G; Escourbiac, F; Leguillon, D; Missirlian, M; Mitteau, R

    2007-01-01

    Carbon fibre composite (CFC) armours have been successfully used for actively cooled plasma facing components (PFCs) of the Tore Supra (TS) tokamak. They were also selected for the divertor of the stellarator W7-X under construction and for the vertical target of the ITER divertor. In TS and W7-X a flat tile design for heat fluxes of 10 MW m -2 has been chosen. To predict the lifetime of such PFCs, it is necessary to analyse the damage mechanisms and to model the damage propagation when the component is exposed to thermal cycling loads. Work has been performed to identify a constitutive law for the CFC and parameters to model crack propagation from the edge singularity. The aim is to predict damage rates and to propose geometric or material improvements to increase the strength and the lifetime of the interfacial bond. For ITER a tube-in-tile concept (monoblock), designed to sustain heat fluxes up to 20 MW m -2 , has been developed. The optimization of the CFC/Cu bond, proposed for flat tiles, could be adopted for the monoblock concept

  4. Integrated System Health Management: Foundational Concepts, Approach, and Implementation.

    Science.gov (United States)

    Figueroa, Fernando; Schmalzel, John; Walker, Mark; Venkatesh, Meera; Kapadia, Ravi; Morris, Jon; Turowski, Mark; Smith, Harvey

    2009-01-01

    Implementation of integrated system health management (ISHM) capability is fundamentally linked to the management of data, information, and knowledge (DIaK) with the purposeful objective of determining the health of a system. It is akin to having a team of experts who are all individually and collectively observing and analyzing a complex system, and communicating effectively with each other in order to arrive to an accurate and reliable assessment of its health. We present concepts, procedures, and a specific approach as a foundation for implementing a credible ISHM capability. The capability stresses integration of DIaK from all elements of a system. The intent is also to make possible implementation of on-board ISHM capability, in contrast to a remote capability. The information presented is the result of many years of research, development, and maturation of technologies, and of prototype implementations in operational systems (rocket engine test facilities). The paper will address the following topics: 1. ISHM Model of a system 2. Detection of anomaly indicators. 3. Determination and confirmation of anomalies. 4. Diagnostic of causes and determination of effects. 5. Consistency checking cycle. 6. Management of health information 7. User Interfaces 8. Example implementation ISHM has been defined from many perspectives. We define it as a capability that might be achieved by various approaches. We describe a specific approach that has been matured throughout many years of development, and pilot implementations. ISHM is a capability that is achieved by integrating data, information, and knowledge (DIaK) that might be distributed throughout the system elements (which inherently implies capability to manage DIaK associated with distributed sub-systems). DIaK must be available to any element of a system at the right time and in accordance with a meaningful context. ISHM Functional Capability Level (FCL) is measured by how well a system performs the following

  5. Astronomy in Early Childhood Education: A Concept-Based Approach

    Science.gov (United States)

    Ampartzaki, Maria; Kalogiannakis, Michail

    2016-01-01

    In an attempt to understand the natural world's phenomena, young children form their perceptions of different aspects of the macrocosm, which they contrast with new scientific concepts. This process calls for an early intervention that will provide the stimuli and the tools for the development of new concepts, ideas, and cognitive structures. The…

  6. Effect of concept mapping approach on students' achievement in ...

    African Journals Online (AJOL)

    The quasi-experimental research design was used in carrying out the study adopting the pre-test – post-test control type. The sample consists of 180 Senior Secondary One (SS1) Students comprising of 88 males and 92 females. In each ... The experimental group was taught mathematical concepts using concept mapping ...

  7. Analysing the Effects of Flood-Resilience Technologies in Urban Areas Using a Synthetic Model Approach

    Directory of Open Access Journals (Sweden)

    Reinhard Schinke

    2016-11-01

    Full Text Available Flood protection systems with their spatial effects play an important role in managing and reducing flood risks. The planning and decision process as well as the technical implementation are well organized and often exercised. However, building-related flood-resilience technologies (FReT are often neglected due to the absence of suitable approaches to analyse and to integrate such measures in large-scale flood damage mitigation concepts. Against this backdrop, a synthetic model-approach was extended by few complementary methodical steps in order to calculate flood damage to buildings considering the effects of building-related FReT and to analyse the area-related reduction of flood risks by geo-information systems (GIS with high spatial resolution. It includes a civil engineering based investigation of characteristic properties with its building construction including a selection and combination of appropriate FReT as a basis for derivation of synthetic depth-damage functions. Depending on the real exposition and the implementation level of FReT, the functions can be used and allocated in spatial damage and risk analyses. The application of the extended approach is shown at a case study in Valencia (Spain. In this way, the overall research findings improve the integration of FReT in flood risk management. They provide also some useful information for advising of individuals at risk supporting the selection and implementation of FReT.

  8. Elastomeric Structural Attachment Concepts for Aircraft Flap Noise Reduction - Challenges and Approaches to Hyperelastic Structural Modeling and Analysis

    Science.gov (United States)

    Sreekantamurthy, Thammaiah; Turner, Travis L.; Moore, James B.; Su, Ji

    2014-01-01

    Airframe noise is a significant part of the overall noise of transport aircraft during the approach and landing phases of flight. Airframe noise reduction is currently emphasized under the Environmentally Responsible Aviation (ERA) and Fixed Wing (FW) Project goals of NASA. A promising concept for trailing-edge-flap noise reduction is a flexible structural element or link that connects the side edges of the deployable flap to the adjacent main-wing structure. The proposed solution is distinguished by minimization of the span-wise extent of the structural link, thereby minimizing the aerodynamic load on the link structure at the expense of increased deformation requirement. Development of such a flexible structural link necessitated application of hyperelastic materials, atypical structural configurations and novel interface hardware. The resulting highly-deformable structural concept was termed the FLEXible Side Edge Link (FLEXSEL) concept. Prediction of atypical elastomeric deformation responses from detailed structural analysis was essential for evaluating feasible concepts that met the design constraints. The focus of this paper is to describe the many challenges encountered with hyperelastic finite element modeling and the nonlinear structural analysis of evolving FLEXSEL concepts. Detailed herein is the nonlinear analysis of FLEXSEL concepts that emerged during the project which include solid-section, foamcore, hollow, extended-span and pre-stressed concepts. Coupon-level analysis performed on elastomeric interface joints, which form a part of the FLEXSEL topology development, are also presented.

  9. Concept design of the DEMO divertor cassette-to-vacuum vessel locking system adopting a systems engineering approach

    International Nuclear Information System (INIS)

    Di Gironimo, G.; Carfora, D.; Esposito, G.; Lanzotti, A.; Marzullo, D.; Siuko, M.

    2015-01-01

    Highlights: • An iterative and incremental design process for cassette-to-VV locking system of DEMO divertor is presented. • Three different concepts have been developed with a systematic design approach. • The final concept has been selected with Fuzzy-Analytic Hierarchy Process in virtual reality. - Abstract: This paper deals with pre-concept studies of DEMO divertor cassette-to-vacuum vessel locking system under the work program WP13-DAS-07-T06: Divertor Remote Maintenance System pre-concept study. An iterative design process, consistent with Systems Engineering guidelines and named Iterative and Participative Axiomatic Design Process (IPADeP), is used in this paper to propose new innovative solutions for divertor locking system, which can overcome the difficulties in applying the ITER principles to DEMO. The solutions conceived have been analysed from the structural point of view using the software Ansys and, eventually, evaluated using the methodology known as Fuzzy-Analytic Hierarchy Process. Due to the lack and the uncertainty of the requirements in this early conceptual design stage, the aim is to cover a first iteration of an iterative and incremental process to propose an innovative design concept to be developed in more details as the information will be completed

  10. Concept design of the DEMO divertor cassette-to-vacuum vessel locking system adopting a systems engineering approach

    Energy Technology Data Exchange (ETDEWEB)

    Di Gironimo, G., E-mail: giuseppe.digironimo@unina.it [Università degli Studi di Napoli “Federico II”, Dipartimento di Ingegneria Industriale, Piazzale Tecchio 80, 80135 Napoli (Italy); Carfora, D. [Tampere University of Technology, Korkeakoulunkatu 6, 33720 Tampere (Finland); VTT Technical Research Centre of Finland, Tekniikankatu 1, PO Box 1300, FI-33101 Tampere (Finland); Università degli Studi di Napoli “Federico II”, Dipartimento di Ingegneria Industriale, Piazzale Tecchio 80, 80135 Napoli (Italy); Esposito, G.; Lanzotti, A.; Marzullo, D. [Università degli Studi di Napoli “Federico II”, Dipartimento di Ingegneria Industriale, Piazzale Tecchio 80, 80135 Napoli (Italy); Siuko, M. [VTT Technical Research Centre of Finland, Tekniikankatu 1, PO Box 1300, FI-33101 Tampere (Finland)

    2015-05-15

    Highlights: • An iterative and incremental design process for cassette-to-VV locking system of DEMO divertor is presented. • Three different concepts have been developed with a systematic design approach. • The final concept has been selected with Fuzzy-Analytic Hierarchy Process in virtual reality. - Abstract: This paper deals with pre-concept studies of DEMO divertor cassette-to-vacuum vessel locking system under the work program WP13-DAS-07-T06: Divertor Remote Maintenance System pre-concept study. An iterative design process, consistent with Systems Engineering guidelines and named Iterative and Participative Axiomatic Design Process (IPADeP), is used in this paper to propose new innovative solutions for divertor locking system, which can overcome the difficulties in applying the ITER principles to DEMO. The solutions conceived have been analysed from the structural point of view using the software Ansys and, eventually, evaluated using the methodology known as Fuzzy-Analytic Hierarchy Process. Due to the lack and the uncertainty of the requirements in this early conceptual design stage, the aim is to cover a first iteration of an iterative and incremental process to propose an innovative design concept to be developed in more details as the information will be completed.

  11. Recent trends in fracture and damage mechanics

    CERN Document Server

    Zybell, Lutz

    2016-01-01

    This book covers a wide range of topics in fracture and damage mechanics. It presents historical perspectives as well as recent innovative developments, presented by peer reviewed contributions from internationally acknowledged authors.  The volume deals with the modeling of fracture and damage in smart materials, current industrial applications of fracture mechanics, and it explores advances in fracture testing methods. In addition, readers will discover trends in the field of local approach to fracture and approaches using analytical mechanics. Scholars in the fields of materials science, engineering and computational science will value this volume which is dedicated to Meinhard Kuna on the occasion of his 65th birthday in 2015. This book incorporates the proceedings of an international symposium that was organized to honor Meinhard Kuna’s contributions to the field of theoretical and applied fracture and damage mechanics.

  12. Modeling concept drift

    DEFF Research Database (Denmark)

    Borchani, Hanen; Martinez, Ana Maria; Masegosa, Andrés R.

    2015-01-01

    An often used approach for detecting and adapting to concept drift when doing classification is to treat the data as i.i.d. and use changes in classification accuracy as an indication of concept drift. In this paper, we take a different perspective and propose a framework, based on probabilistic ...... data set from a Spanish bank....

  13. Probabilistic Fatigue Damage Program (FATIG)

    Science.gov (United States)

    Michalopoulos, Constantine

    2012-01-01

    FATIG computes fatigue damage/fatigue life using the stress rms (root mean square) value, the total number of cycles, and S-N curve parameters. The damage is computed by the following methods: (a) traditional method using Miner s rule with stress cycles determined from a Rayleigh distribution up to 3*sigma; and (b) classical fatigue damage formula involving the Gamma function, which is derived from the integral version of Miner's rule. The integration is carried out over all stress amplitudes. This software solves the problem of probabilistic fatigue damage using the integral form of the Palmgren-Miner rule. The software computes fatigue life using an approach involving all stress amplitudes, up to N*sigma, as specified by the user. It can be used in the design of structural components subjected to random dynamic loading, or by any stress analyst with minimal training for fatigue life estimates of structural components.

  14. A new approach toward geometrical concept of black hole thermodynamics

    Energy Technology Data Exchange (ETDEWEB)

    Hendi, Seyed Hossein [Shiraz University, Physics Department and Biruni Observatory, College of Sciences, Shiraz (Iran, Islamic Republic of); Research Institute for Astronomy and Astrophysics of Maragha (RIAAM), Maragha (Iran, Islamic Republic of); Panahiyan, Shahram; Panah, Behzad Eslam; Momennia, Mehrab [Shiraz University, Physics Department and Biruni Observatory, College of Sciences, Shiraz (Iran, Islamic Republic of)

    2015-10-15

    Motivated by the energy representation of Riemannian metric, in this paper we study different approaches toward the geometrical concept of black hole thermodynamics. We investigate thermodynamical Ricci scalar of Weinhold, Ruppeiner and Quevedo metrics and show that their number and location of divergences do not coincide with phase transition points arisen from heat capacity. Next, we introduce a new metric to solve these problems. We show that the denominator of the Ricci scalar of the new metric contains terms which coincide with different types of phase transitions. We elaborate the effectiveness of the new metric and shortcomings of the previous metrics with some examples. Furthermore, we find a characteristic behavior of the new thermodynamical Ricci scalar which enables one to distinguish two types of phase transitions. In addition, we generalize the new metric for the cases of more than two extensive parameters and show that in these cases the divergencies of thermodynamical Ricci scalar coincide with phase transition points of the heat capacity. (orig.)

  15. A new approach toward geometrical concept of black hole thermodynamics

    International Nuclear Information System (INIS)

    Hendi, Seyed Hossein; Panahiyan, Shahram; Panah, Behzad Eslam; Momennia, Mehrab

    2015-01-01

    Motivated by the energy representation of Riemannian metric, in this paper we study different approaches toward the geometrical concept of black hole thermodynamics. We investigate thermodynamical Ricci scalar of Weinhold, Ruppeiner and Quevedo metrics and show that their number and location of divergences do not coincide with phase transition points arisen from heat capacity. Next, we introduce a new metric to solve these problems. We show that the denominator of the Ricci scalar of the new metric contains terms which coincide with different types of phase transitions. We elaborate the effectiveness of the new metric and shortcomings of the previous metrics with some examples. Furthermore, we find a characteristic behavior of the new thermodynamical Ricci scalar which enables one to distinguish two types of phase transitions. In addition, we generalize the new metric for the cases of more than two extensive parameters and show that in these cases the divergencies of thermodynamical Ricci scalar coincide with phase transition points of the heat capacity. (orig.)

  16. GPU-based local interaction simulation approach for simplified temperature effect modelling in Lamb wave propagation used for damage detection

    International Nuclear Information System (INIS)

    Kijanka, P; Radecki, R; Packo, P; Staszewski, W J; Uhl, T

    2013-01-01

    Temperature has a significant effect on Lamb wave propagation. It is important to compensate for this effect when the method is considered for structural damage detection. The paper explores a newly proposed, very efficient numerical simulation tool for Lamb wave propagation modelling in aluminum plates exposed to temperature changes. A local interaction approach implemented with a parallel computing architecture and graphics cards is used for these numerical simulations. The numerical results are compared with the experimental data. The results demonstrate that the proposed approach could be used efficiently to produce a large database required for the development of various temperature compensation procedures in structural health monitoring applications. (paper)

  17. Extended Plate and Beam Wall System: Concept Investigation and Initial Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Wiehagen, J. [Partnership for Home Innovation, Upper Marlboro, MD (United States); Kochkin, V. [Partnership for Home Innovation, Upper Marlboro, MD (United States)

    2015-08-01

    A new and innovative High-R wall design, referred to as the Extended Plate & Beam (EP&B), is under development. The EP&B system uniquely integrates foam sheathing insulation with wall framing such that wood structural panels are installed exterior of the foam sheathing, enabling the use of standard practices for installation of drainage plane, windows and doors, claddings, cavity insulation, and the standard exterior foam sheathing installation approach prone to damage of the foam during transportation of prefabricated wall panels. As part of the ongoing work, the EP&B wall system concept has undergone structural verification testing and has been positively vetted by a group of industry stakeholders. Having passed these initial milestone markers, the advanced wall system design has been analyzed to assess cost implications relative to other advanced wall systems, undergone design assessment to develop construction details, and has been evaluated to develop representative prescriptive requirements for the building code. This report summarizes the assessment steps conducted to-date and provides details of the concept development.

  18. Damage detection in composites using nonlinear ultrasonically modulated thermography

    Science.gov (United States)

    Malfense Fierro, G.-P.; Dionysopoulos, D.; Meo, M.; Ciampa, F.

    2018-03-01

    This paper proposes a novel nonlinear ultrasonically stimulated thermography technique for a quick and reliable assessment of material damage in carbon fibre reinforced plastic (CFRP) composite materials. The proposed nondestructive evaluation (NDE) method requires narrow sweep ultrasonic excitation using contact piezoelectric transducers in order to identify dual excitation frequencies associated with the damage resonance. High-amplitude signals and higher harmonic generation are necessary conditions for an accurate identification of these two input frequencies. Dual periodic excitation using high- and low-frequency input signals was then performed in order to generate frictional heating at the crack location that was measured by an infrared (IR) camera. To validate this concept, an impact damaged CFRP composite panel was tested and the experimental results were compared with traditional flash thermography. A laser vibrometer was used to investigate the response of the material with dual frequency excitation. The proposed nonlinear ultrasonically modulated thermography successfully detected barely visible impact damage in CFRP composites. Hence, it can be considered as an alternative to traditional flash thermography and thermosonics by allowing repeatable detection of damage in composites.

  19. The concept of cluster

    DEFF Research Database (Denmark)

    Laursen, Lea Louise Holst; Møller, Jørgen

    2013-01-01

    villages in order to secure their future. This paper will address the concept of cluster-villages as a possible approach to strengthen the conditions of contemporary Danish villages. Cluster-villages is a concept that gather a number of villages in a network-structure where the villages both work together...... to forskellige positioner ser vi en ny mulighed for landsbyudvikling, som vi kalder Clustervillages. In order to investigate the potentials and possibilities of the cluster-village concept the paper will seek to unfold the concept strategically; looking into the benefits of such concept. Further, the paper seeks...

  20. Structural health monitoring using DOG multi-scale space: an approach for analyzing damage characteristics

    Science.gov (United States)

    Guo, Tian; Xu, Zili

    2018-03-01

    Measurement noise is inevitable in practice; thus, it is difficult to identify defects, cracks or damage in a structure while suppressing noise simultaneously. In this work, a novel method is introduced to detect multiple damage in noisy environments. Based on multi-scale space analysis for discrete signals, a method for extracting damage characteristics from the measured displacement mode shape is illustrated. Moreover, the proposed method incorporates a data fusion algorithm to further eliminate measurement noise-based interference. The effectiveness of the method is verified by numerical and experimental methods applied to different structural types. The results demonstrate that there are two advantages to the proposed method. First, damage features are extracted by the difference of the multi-scale representation; this step is taken such that the interference of noise amplification can be avoided. Second, a data fusion technique applied to the proposed method provides a global decision, which retains the damage features while maximally eliminating the uncertainty. Monte Carlo simulations are utilized to validate that the proposed method has a higher accuracy in damage detection.

  1. Reappraising the concept of massive transfusion in trauma

    DEFF Research Database (Denmark)

    Stanworth, Simon J; Morris, Timothy P; Gaarder, Christine

    2010-01-01

    ABSTRACT : INTRODUCTION : The massive-transfusion concept was introduced to recognize the dilutional complications resulting from large volumes of packed red blood cells (PRBCs). Definitions of massive transfusion vary and lack supporting clinical evidence. Damage-control resuscitation regimens...... of modern trauma care are targeted to the early correction of acute traumatic coagulopathy. The aim of this study was to identify a clinically relevant definition of trauma massive transfusion based on clinical outcomes. We also examined whether the concept was useful in that early prediction of massive...... transfusion as a concept in trauma has limited utility, and emphasis should be placed on identifying patients with massive hemorrhage and acute traumatic coagulopathy....

  2. Concept Mapping as an Approach to Facilitate Participatory Intervention Building.

    Science.gov (United States)

    L Allen, Michele; Schaleben-Boateng, Dane; Davey, Cynthia S; Hang, Mikow; Pergament, Shannon

    2015-01-01

    A challenge to addressing community-defined need through community-based participatory intervention building is ensuring that all collaborators' opinions are represented. Concept mapping integrates perspectives of individuals with differing experiences, interests, or expertise into a common visually depicted framework, and ranks composite views on importance and feasibility. To describe the use of concept mapping to facilitate participatory intervention building for a school-based, teacher-focused, positive youth development (PYD) promotion program for Latino, Hmong, and Somali youth. Particiants were teachers, administrators, youth, parents, youth workers, and community and university researchers on the projects' community collaborative board. We incorporated previously collected qualitative data into the process. In a mixed-methods process we 1) generated statements based on key informant interview and focus group data from youth workers, teachers, parents, and youth in multiple languages regarding ways teachers promote PYD for Somali, Latino and Hmong youth; 2) guided participants to individually sort statements into meaningful groupings and rate them by importance and feasibility; 3) mapped the statements based on their relation to each other using multivariate statistical analyses to identify concepts, and as a group identified labels for each concept; and 4) used labels and statement ratings to identify feasible and important concepts as priorities for intervention development. We identified 12 concepts related to PYD promotion in schools and prioritized 8 for intervention development. Concept mapping facilitated participatory intervention building by formally representing all participants' opinions, generating visual representation of group thinking, and supporting priority setting. Use of prior qualitative work increased the diversity of viewpoints represented.

  3. Pest damage assessment in fruits and vegetables using thermal imaging

    Science.gov (United States)

    Vadakkapattu Canthadai, Badrinath; Muthuraju, M. Esakki; Pachava, Vengalrao; Sengupta, Dipankar

    2015-05-01

    In some fruits and vegetables, it is difficult to visually identify the ones which are pest infested. This particular aspect is important for quarantine and commercial operations. In this article, we propose to present the results of a novel technique using thermal imaging camera to detect the nature and extent of pest damage in fruits and vegetables, besides indicating the level of maturity and often the presence of the pest. Our key idea relies on the fact that there is a difference in the heat capacity of normal and damaged ones and also observed the change in surface temperature over time that is slower in damaged ones. This paper presents the concept of non-destructive evaluation using thermal imaging technique for identifying pest damage levels of fruits and vegetables based on investigations carried out on random samples collected from a local market.

  4. Nomadic concepts in the history of biology.

    Science.gov (United States)

    Surman, Jan; Stráner, Katalin; Haslinger, Peter

    2014-12-01

    The history of scientific concepts has firmly settled among the instruments of historical inquiry. In our section we approach concepts from the perspective of nomadic concepts (Isabelle Stengers). Instead of following the evolution of concepts within one disciplinary network, we see them as subject to constant reification and change while crossing and turning across disciplines and non-scientific domains. This introduction argues that understanding modern biology is not possible without taking into account the constant transfers and translations that affected concepts. We argue that this approach does not only engage with nomadism between disciplines and non-scientific domains, but reflects on and involves the metaphoric value of concepts as well. Copyright © 2014 Elsevier Ltd. All rights reserved.

  5. Formability prediction for AHSS materials using damage models

    Science.gov (United States)

    Amaral, R.; Santos, Abel D.; José, César de Sá; Miranda, Sara

    2017-05-01

    Advanced high strength steels (AHSS) are seeing an increased use, mostly due to lightweight design in automobile industry and strict regulations on safety and greenhouse gases emissions. However, the use of these materials, characterized by a high strength to weight ratio, stiffness and high work hardening at early stages of plastic deformation, have imposed many challenges in sheet metal industry, mainly their low formability and different behaviour, when compared to traditional steels, which may represent a defying task, both to obtain a successful component and also when using numerical simulation to predict material behaviour and its fracture limits. Although numerical prediction of critical strains in sheet metal forming processes is still very often based on the classic forming limit diagrams, alternative approaches can use damage models, which are based on stress states to predict failure during the forming process and they can be classified as empirical, physics based and phenomenological models. In the present paper a comparative analysis of different ductile damage models is carried out, in order numerically evaluate two isotropic coupled damage models proposed by Johnson-Cook and Gurson-Tvergaard-Needleman (GTN), each of them corresponding to the first two previous group classification. Finite element analysis is used considering these damage mechanics approaches and the obtained results are compared with experimental Nakajima tests, thus being possible to evaluate and validate the ability to predict damage and formability limits for previous defined approaches.

  6. Formability prediction for AHSS materials using damage models

    International Nuclear Information System (INIS)

    Amaral, R.; Miranda, Sara; Santos, Abel D.; José, César de Sá

    2017-01-01

    Advanced high strength steels (AHSS) are seeing an increased use, mostly due to lightweight design in automobile industry and strict regulations on safety and greenhouse gases emissions. However, the use of these materials, characterized by a high strength to weight ratio, stiffness and high work hardening at early stages of plastic deformation, have imposed many challenges in sheet metal industry, mainly their low formability and different behaviour, when compared to traditional steels, which may represent a defying task, both to obtain a successful component and also when using numerical simulation to predict material behaviour and its fracture limits. Although numerical prediction of critical strains in sheet metal forming processes is still very often based on the classic forming limit diagrams, alternative approaches can use damage models, which are based on stress states to predict failure during the forming process and they can be classified as empirical, physics based and phenomenological models. In the present paper a comparative analysis of different ductile damage models is carried out, in order numerically evaluate two isotropic coupled damage models proposed by Johnson-Cook and Gurson-Tvergaard-Needleman (GTN), each of them corresponding to the first two previous group classification. Finite element analysis is used considering these damage mechanics approaches and the obtained results are compared with experimental Nakajima tests, thus being possible to evaluate and validate the ability to predict damage and formability limits for previous defined approaches. (paper)

  7. A ChIP-chip approach reveals a novel role for transcription factor IRF1 in the DNA damage response.

    Science.gov (United States)

    Frontini, Mattia; Vijayakumar, Meeraa; Garvin, Alexander; Clarke, Nicole

    2009-03-01

    IRF1 is a transcription factor that regulates key processes in the immune system and in tumour suppression. To gain further insight into IRF1's role in these processes, we searched for new target genes by performing chromatin immunoprecipitation coupled to a CpG island microarray (ChIP-chip). Using this approach we identified 202 new IRF1-binding sites with high confidence. Functional categorization of the target genes revealed a surprising cadre of new roles that can be linked to IRF1. One of the major functional categories was the DNA damage response pathway. In order to further validate our findings, we show that IRF1 can regulate the mRNA expression of a number of the DNA damage response genes in our list. In particular, we demonstrate that the mRNA and protein levels of the DNA repair protein BRIP1 [Fanconi anemia gene J (FANC J)] are upregulated after IRF1 over-expression. We also demonstrate that knockdown of IRF1 by siRNA results in loss of BRIP1 expression, abrogation of BRIP1 foci after DNA interstrand crosslink (ICL) damage and hypersensitivity to the DNA crosslinking agent, melphalan; a characteristic phenotype of FANC J cells. Taken together, our data provides a more complete understanding of the regulatory networks controlled by IRF1 and reveals a novel role for IRF1 in regulating the ICL DNA damage response.

  8. A ChIP–chip approach reveals a novel role for transcription factor IRF1 in the DNA damage response

    Science.gov (United States)

    Frontini, Mattia; Vijayakumar, Meeraa; Garvin, Alexander; Clarke, Nicole

    2009-01-01

    IRF1 is a transcription factor that regulates key processes in the immune system and in tumour suppression. To gain further insight into IRF1's role in these processes, we searched for new target genes by performing chromatin immunoprecipitation coupled to a CpG island microarray (ChIP–chip). Using this approach we identified 202 new IRF1-binding sites with high confidence. Functional categorization of the target genes revealed a surprising cadre of new roles that can be linked to IRF1. One of the major functional categories was the DNA damage response pathway. In order to further validate our findings, we show that IRF1 can regulate the mRNA expression of a number of the DNA damage response genes in our list. In particular, we demonstrate that the mRNA and protein levels of the DNA repair protein BRIP1 [Fanconi anemia gene J (FANC J)] are upregulated after IRF1 over-expression. We also demonstrate that knockdown of IRF1 by siRNA results in loss of BRIP1 expression, abrogation of BRIP1 foci after DNA interstrand crosslink (ICL) damage and hypersensitivity to the DNA crosslinking agent, melphalan; a characteristic phenotype of FANC J cells. Taken together, our data provides a more complete understanding of the regulatory networks controlled by IRF1 and reveals a novel role for IRF1 in regulating the ICL DNA damage response. PMID:19129219

  9. The corporate image concept : a strategic approach

    NARCIS (Netherlands)

    Vos, M.F.

    1992-01-01

    Following a clarification of the concept of corporate image using the available literature as a basis, the process of image-formation and the nature of the influence of corporate image on behaviour are explored. The relationship with corporate identity is then discussed. This exploration

  10. Programming Language Concepts - The Lambda Calculus Approach

    NARCIS (Netherlands)

    Fokkinga, M.M.; Asveld, P.R.J.; Nijholt, Antinus

    1987-01-01

    The Lambda Calculus is a formal system, originally intended as a tool in the foundation of mathematics, but mainly used to study the concepts of algorithm and effective computability. Recently, the Lambda Calculus and related systems acquire attention from Computer Science for another reason too:

  11. Web-Searching to Learn: The Role of Internet Self-Efficacy in Pre-School Educators' Conceptions and Approaches

    Science.gov (United States)

    Kao, Chia-Pin; Chien, Hui-Min

    2017-01-01

    This study was conducted to explore the relationships between pre-school educators' conceptions of and approaches to learning by web-searching through Internet Self-efficacy. Based on data from 242 pre-school educators who had prior experience of participating in web-searching in Taiwan for path analyses, it was found in this study that…

  12. Deep remission: a new concept?

    Science.gov (United States)

    Colombel, Jean-Frédéric; Louis, Edouard; Peyrin-Biroulet, Laurent; Sandborn, William J; Panaccione, Remo

    2012-01-01

    Crohn's disease (CD) is a chronic inflammatory disorder characterized by periods of clinical remission alternating with periods of relapse defined by recurrent clinical symptoms. Persistent inflammation is believed to lead to progressive bowel damage over time, which manifests with the development of strictures, fistulae and abscesses. These disease complications frequently lead to a need for surgical resection, which in turn leads to disability. So CD can be characterized as a chronic, progressive, destructive and disabling disease. In rheumatoid arthritis, treatment paradigms have evolved beyond partial symptom control alone toward the induction and maintenance of sustained biological remission, also known as a 'treat to target' strategy, with the goal of improving long-term disease outcomes. In CD, there is currently no accepted, well-defined, comprehensive treatment goal that entails the treatment of both clinical symptoms and biologic inflammation. It is important that such a treatment concept begins to evolve for CD. A treatment strategy that delays or halts the progression of CD to increasing damage and disability is a priority. As a starting point, a working definition of sustained deep remission (that includes long-term biological remission and symptom control) with defined patient outcomes (including no disease progression) has been proposed. The concept of sustained deep remission represents a goal for CD management that may still evolve. It is not clear if the concept also applies to ulcerative colitis. Clinical trials are needed to evaluate whether treatment algorithms that tailor therapy to achieve deep remission in patients with CD can prevent disease progression and disability. Copyright © 2012 S. Karger AG, Basel.

  13. Identifying problematic concepts in SNOMED CT using a lexical approach.

    Science.gov (United States)

    Agrawal, Ankur; Perl, Yehoshua; Elhanan, Gai

    2013-01-01

    SNOMED CT (SCT) has been endorsed as a premier clinical terminology by many organizations with a perceived use within electronic health records and clinical information systems. However, there are indications that, at the moment, SCT is not optimally structured for its intended use by healthcare practitioners. A study is conducted to investigate the extent of inconsistencies among the concepts in SCT. A group auditing technique to improve the quality of SCT is introduced that can help identify problematic concepts with a high probability. Positional similarity sets are defined, which are groups of concepts that are lexically similar and the position of the differing word in the fully specified name of the concepts of a set that correspond to each other. A manual auditing of a sample of such sets found 38% of the sets exhibiting one or more inconsistent concepts. Group auditing techniques such as this can thus be very helpful to assure the quality of SCT, which will help expedite its adoption as a reference terminology for clinical purposes.

  14. Production bias: A proposed modification of the driving force for void swelling under cascade damage conditions

    International Nuclear Information System (INIS)

    Woo, C.H.; Garner, F.A.

    1991-11-01

    A new concept of point-defect production as the main driving force for void swelling under cascade damage conditions is proposed. This concept takes into account the recombination and formation of immobile clusters and loops of vacancies and interstitials in the cascade region. The life times of the clusters and loops due to desolution are strong functions of the temperature, as well as their vacancy and interstitial nature. The resulting biased production of free point defects from the internal sources is shown to be a strong driving force for void swelling. The characteristics of void swelling due to production bias are described and compared with experimental results. We conclude that the production bias concept provides a good description of void swelling under cascade damage conditions

  15. Production bias: A proposed modification of the driving force for void swelling under cascade damage conditions

    International Nuclear Information System (INIS)

    Woo, C.H.; Singh, B.N.; Garner, F.A.

    1992-01-01

    A new concept of point defect production as the main driving force for void swelling under cascade damage conditions is proposed. This concept takes into account the recombination and formation of immobile clusters and loops of vacancies and interstitials in the cascade region. The lifetimes of the clusters and loops due to desolution are strong functions of the temperature, as well as their vacancy and interstitial nature. The resulting biased production of free point defects from the internal sources is shown to be a strong driving force for void swelling. The characteristics of void swelling due to production bias are described and compared with experimental results. We conclude that the production bias concept provides a good description of void swelling under cascade damage conditions. (orig.)

  16. Approaches to defining «financial potential» concept as of economic analysis object

    Directory of Open Access Journals (Sweden)

    O.M. Dzyubenkо

    2017-12-01

    Full Text Available The research analyzes the works of scientists who studied the issues of financial potential as an economic category. Due to analyzing the approaches of the scientists to the concept of "financial potential" the author identifies six approaches to the interpretation of its essence, they are: the totality of the enterprise financial resources, the sources of the enterprise economic activity financing, the enterprise economic activity development, the enterprise financial indicators, the system of enterprise financial management, the enterprise efficiency characteristics. It is established that the financial potential is the multifaceted category that characterizes the financial and economic activity of enterprises. The author's definition of the financial potential in the context of its place in the objects of economic analysis is proposed. It is established that the financial potential is the object of the enterprise economic activity management and is the subject to analytical assessments for establishing its state and directions of development.

  17. Modeling of damage generation mechanisms in silicon at energies below the displacement threshold

    International Nuclear Information System (INIS)

    Santos, Ivan; Marques, Luis A.; Pelaz, Lourdes

    2006-01-01

    We have used molecular dynamics simulation techniques to study the generation of damage in Si within the low-energy deposition regime. We have demonstrated that energy transfers below the displacement threshold can produce a significant amount of damage, usually neglected in traditional radiation damage calculations. The formation of amorphous pockets agrees with the thermal spike concept of local melting. However, we have found that the order-disorder transition is not instantaneous, but it requires some time to reach the appropriate kinetic-potential energy redistribution for melting. The competition between the rate of this energy redistribution and the energy diffusion to the surrounding atoms determines the amount of damage generated by a given deposited energy. Our findings explain the diverse damage morphology produced by ions of different masses

  18. Electronic hybridisation implications for the damage-tolerance of thin film metallic glasses.

    Science.gov (United States)

    Schnabel, Volker; Jaya, B Nagamani; Köhler, Mathias; Music, Denis; Kirchlechner, Christoph; Dehm, Gerhard; Raabe, Dierk; Schneider, Jochen M

    2016-11-07

    A paramount challenge in materials science is to design damage-tolerant glasses. Poisson's ratio is commonly used as a criterion to gauge the brittle-ductile transition in glasses. However, our data, as well as results in the literature, are in conflict with the concept of Poisson's ratio serving as a universal parameter for fracture energy. Here, we identify the electronic structure fingerprint associated with damage tolerance in thin film metallic glasses. Our correlative theoretical and experimental data reveal that the fraction of bonds stemming from hybridised states compared to the overall bonding can be associated with damage tolerance in thin film metallic glasses.

  19. Structural damage detection robust against time synchronization errors

    International Nuclear Information System (INIS)

    Yan, Guirong; Dyke, Shirley J

    2010-01-01

    Structural damage detection based on wireless sensor networks can be affected significantly by time synchronization errors among sensors. Precise time synchronization of sensor nodes has been viewed as crucial for addressing this issue. However, precise time synchronization over a long period of time is often impractical in large wireless sensor networks due to two inherent challenges. First, time synchronization needs to be performed periodically, requiring frequent wireless communication among sensors at significant energy cost. Second, significant time synchronization errors may result from node failures which are likely to occur during long-term deployment over civil infrastructures. In this paper, a damage detection approach is proposed that is robust against time synchronization errors in wireless sensor networks. The paper first examines the ways in which time synchronization errors distort identified mode shapes, and then proposes a strategy for reducing distortion in the identified mode shapes. Modified values for these identified mode shapes are then used in conjunction with flexibility-based damage detection methods to localize damage. This alternative approach relaxes the need for frequent sensor synchronization and can tolerate significant time synchronization errors caused by node failures. The proposed approach is successfully demonstrated through numerical simulations and experimental tests in a lab

  20. Academic Motivation: Concepts, Strategies, and Counseling Approaches

    Science.gov (United States)

    Rowell, Lonnie; Hong, Eunsook

    2013-01-01

    Motivation is an important foundation of academic development in students. This article discusses academic motivation; its various component concepts in areas such as beliefs, goals, and values; and intrinsic and extrinsic motivation. It also presents major, widely studied theoretical perspectives of academic motivation and briefly illustrates…

  1. The Concept of Respite Care.

    Science.gov (United States)

    Whitmore, Kim E

    2017-07-01

    The aim of this article is to analyze the concept of respite care in the context of caring for a child with special healthcare needs. Respite care has often been identified as an important resource for caregivers of children with special healthcare needs. It can help provide a break from the constant demands of caregiving. A concept analysis was conducted using an evolutionary approach. The data source for the concept analysis was a review of literature addressing respite care for caregivers of children with special healthcare needs. A review of the literature was conducted and a concept model was developed using an evolutionary approach. A theoretical definition of respite care is provided and the defining attributes, related concepts, antecedents, and consequences of respite care are shown in a diagram of the concept of respite care. The conceptual model provides a framework to help nurses better understand the concept of respite care in order to educate caregivers, provide appropriate referrals, serve as providers of respite care, and advocate for policy changes related to the provision of respite care services for caregivers of children with special healthcare needs. © 2016 Wiley Periodicals, Inc.

  2. The Framatome RCVS concept and physics

    International Nuclear Information System (INIS)

    Vallee, A.; Millot, J.P.; Bruna, G.

    1986-06-01

    We have tried through this presentation to emphasize on what FRAMATOME thinks to be the most specific problems of the advanced RCVS (Reactor core with spectral shift) core concept (Spectral shift, voidage, reactivity control). Besides, FRAMATOME is analysing the most important safety related topics typically LOCA and DNBR, and has launched developments on them, in connection with CEA. The core behaviour during a loss of Coolant Accident is quite similar to PWR's, the pitch between rods being sufficiently large for clad ballooning not to cause any damage. To conclude, the core improvements developed by FRAMATOME on the RCVS concept economize the use of fissile materials

  3. Stage-by-stage licensing procedure, prevention of damage, control by administrative courts. Some comments on the Wyhl judgment of the Federal Administrative Court

    International Nuclear Information System (INIS)

    Sellner, D.

    1986-01-01

    The author discusses the three main items of the Wyhl judgment of the Federal Administrative Court, of December 19, 1985 - 7C65/82, which are likely to set trends. The judgment clarifies the function of the socalled preliminary approval of the concept and its delimitation to the preliminary partial licence. According to the judgment, the first is a licensing requirement in substantial law. Precaution for preventing damage according to sec. 7, sub-sec (2) No. 3 Atomic Energy Act is regarded by the Court not as a prevention of hazards, but as the obligation to take every precaution to prevent damage, i.e. types of damage have to be taken into account that cannot be excluded to develop to a real hazard or potential risk. The problem of extent of control by the administrative courts is solved by the approach based on the legal functions of competence and responsibility that are to be drawn from the principle of division of power. (HSCH) [de

  4. Categorizing natural disaster damage assessment using satellite-based geospatial techniques

    Science.gov (United States)

    Myint, S.W.; Yuan, M.; Cerveny, R.S.; Giri, C.

    2008-01-01

    Remote sensing of a natural disaster's damage offers an exciting backup and/or alternative to traditional means of on-site damage assessment. Although necessary for complete assessment of damage areas, ground-based damage surveys conducted in the aftermath of natural hazard passage can sometimes be potentially complicated due to on-site difficulties (e.g., interaction with various authorities and emergency services) and hazards (e.g., downed power lines, gas lines, etc.), the need for rapid mobilization (particularly for remote locations), and the increasing cost of rapid physical transportation of manpower and equipment. Satellite image analysis, because of its global ubiquity, its ability for repeated independent analysis, and, as we demonstrate here, its ability to verify on-site damage assessment provides an interesting new perspective and investigative aide to researchers. Using one of the strongest tornado events in US history, the 3 May 1999 Oklahoma City Tornado, as a case example, we digitized the tornado damage path and co-registered the damage path using pre- and post-Landsat Thematic Mapper image data to perform a damage assessment. We employed several geospatial approaches, specifically the Getis index, Geary's C, and two lacunarity approaches to categorize damage characteristics according to the original Fujita tornado damage scale (F-scale). Our results indicate strong relationships between spatial indices computed within a local window and tornado F-scale damage categories identified through the ground survey. Consequently, linear regression models, even incorporating just a single band, appear effective in identifying F-scale damage categories using satellite imagery. This study demonstrates that satellite-based geospatial techniques can effectively add spatial perspectives to natural disaster damages, and in particular for this case study, tornado damages.

  5. Multidisciplinary approach to evaluate flood damage for residential buildings: first results in Northern Italy

    Science.gov (United States)

    Luino, Fabio

    2015-04-01

    Flooding is the most common natural instability process in Italy. Flood damage are the results of land-use planning policies which, starting chiefly from the late 1950s and early 1960s, did not take into account the geomorphologic-hydraulic characteristics of an area or the its historical data on past flood events. Historically, compared to other areas, riverside property has always been less valuable. Unfortunately, year after year, even areas of high recreational and environmental value were intensely urbanized despite their being exposed to the threat of flooding. As the number of residential dwellings, infrastructure and industrial buildings increased, what was originally a hazard became a risk. For each flood event, the damage depends on the specific land-use of the area and subsequently on the elements at risk in the area involved and its vulnerability, expressed as a percentage of the element that has actually been lost during the event. This is why a comprehensive knowledge of the area it is so important for conducting a detailed survey of an area's structures and infrastructure and to evaluate the degree of vulnerability. This paper presents first results in Italy of the European Project called DAMAGE, the first attempt by the civil protection agencies of several European Union member states to devise a common methodology for the assessment of damage caused by natural or anthropic disasters. The main objective was to create an initial tool for practical and immediate application by civil protection agencies and local governments, to assess damage in a multidimensional perspective that takes into account infrastructure, the economy, the environment and social problems. Within the framework of a broad-based project for the evaluation and collection of reports on damage caused by floods, the CNR-IRPI of Turin and Regione Lombardia have directed attention to the town of Cittiglio (province of Varese), which was struck by severe flash flood in May 2002. One of

  6. Contribution to the damage measurement of reinforced concrete buildings under seismic solicitations: proposal of an improvement for the evaluation of the damaging potential of a signal and of the damage for the girders structures: introduction to the reliability analysis of the damage in terms of the damaging potential of a seismic signal

    International Nuclear Information System (INIS)

    Naze, P.A.

    2004-12-01

    Building damage measurement during and after an earthquake remains an economical as well as technical stake as difficult to cope with as the problem it raises all the more because its importance depends on the field or the building function: civil, medical, military, nuclear... Even building ruin remains one of the most critical diagnosis to establish. Then since prediction of earthquake still remains impossible, foreseeing structural damages due to seismic motion has become a key point in earthquake engineering. This work aims at evaluating the relevance of classical seismic signal damaging potential indices and at proposing improvement of these indices in order to provide better prediction of structural damage due to earthquake. The first part supplies a non exhaustive state of the art of main Damaging Potential Indices IP and Damage Indices ID used in earthquake engineering. In the second part, IP/ID correlations results are analysed in order to evaluate IP relevance, to justify displacement based approach use (capacity spectrum method) for damage prediction and to make good the proposal for improvement of Damaging Potential Index. But studding seismic signal damaging potential is usually not enough to foresee damage firstly because scalar representation of damaging potential is not easy to link to physics reality and secondly because of damage scattering often observed for a single value of seismic signal damaging potential. In the same way, a single damage index value may correspond to very different structural damage states. Hence, this work carries on with a contribution to damage index reliability improvement, able to detect real structural damage appearance as well as to quantify this damage by associating the distance between one structural sate and the structural collapse, defined as an instability. (author)

  7. Identifying Threshold Concepts for Information Literacy: A Delphi Study

    Directory of Open Access Journals (Sweden)

    Lori Townsend

    2016-06-01

    Full Text Available This study used the Delphi method to engage expert practitioners on the topic of threshold concepts for information literacy. A panel of experts considered two questions. First, is the threshold concept approach useful for information literacy instruction? The panel unanimously agreed that the threshold concept approach holds potential for information literacy instruction. Second, what are the threshold concepts for information literacy instruction? The panel proposed and discussed over fifty potential threshold concepts, finally settling on six information literacy threshold concepts.

  8. Radiation damage prediction system using damage function

    International Nuclear Information System (INIS)

    Tanaka, Yoshihisa; Mori, Seiji

    1979-01-01

    The irradiation damage analysis system using a damage function was investigated. This irradiation damage analysis system consists of the following three processes, the unfolding of a damage function, the calculation of the neutron flux spectrum of the object of damage analysis and the estimation of irradiation effect of the object of damage analysis. The damage function is calculated by applying the SAND-2 code. The ANISN and DOT3, 5 codes are used to calculate neutron flux. The neutron radiation and the allowable time of reactor operation can be estimated based on these calculations of the damage function and neutron flux. The flow diagram of the process of analyzing irradiation damage by a damage function and the flow diagram of SAND-2 code are presented, and the analytical code for estimating damage, which is determined with a damage function and a neutron spectrum, is explained. The application of the irradiation damage analysis system using a damage function was carried out to the core support structure of a fast breeder reactor for the damage estimation and the uncertainty evaluation. The fundamental analytical conditions and the analytical model for this work are presented, then the irradiation data for SUS304, the initial estimated values of a damage function, the error analysis for a damage function and the analytical results are explained concerning the computation of a damage function for 10% total elongation. Concerning the damage estimation of FBR core support structure, the standard and lower limiting values of damage, the permissible neutron flux and the allowable years of reactor operation are presented and were evaluated. (Nakai, Y.)

  9. On Indemnity for Non-Pecuniary Damage for Administrative Offenses Committed in Ukraine

    Directory of Open Access Journals (Sweden)

    Oleksii Ostapenko

    2018-06-01

    Full Text Available The article considers the issues of moral responsibility of a person guilty of committing an administrative offense in Ukraine. It offers argumentative author’s vision of the possibility and need to consolidate a number of administrative-legal norms with the aim of legal regulation of moral responsibility, both property and non-property. It analyzes the historical aspect of compensation for non-pecuniary damage, as well as defines the conventions of the International Labor Organization, which provide for compensation for damage suffered by the victim. Attention is drawn to the fact that the current administrative law does not provide for the issue of indemnity for non-pecuniary damage for administrative offenses committed. It is noted about the relationship of morality and law and the moral responsibility is separated from the legal one. The concepts of “harm”, “social danger” are disclosed. Moral and non-personal liability are distinguished. The content of moral damage, fixed in the legislation of foreign countries is analyzed. On the basis of the current administrative legislation of Ukraine, circumstances have been clarified that exclude administrative liability, indicating no liability, including for moral damage. The norms of the criminal-procedural legislation of Ukraine, which provide for indemnity (compensation for damage to the victim at any stage of criminal proceedings are analyzed. Judicial practice is used in this regard. The provisions on conciliation of the parties, on the basis of which the victim has the opportunity to make a decision to refuse to indemnify non-pecuniary damage both before the beginning of the jurisdictional proceedings and during its execution at one or another procedural stage, are considered. The grounds for liability for the moral damage, fixed in the Civil Code of Ukraine are determined. Conclusions are made on the compensation of the moral damage to the victim of property and non-property content

  10. Inflatable bladder to facilitate handling of heavy objects - A concept

    Science.gov (United States)

    Mc Goldrick, G. J.

    1969-01-01

    Inflatable bladder facilitates the removal of heavy, highly finished metal parts from tote boxes or shipping containers. The proposed concept permits removal without danger of damage to the parts or injury to handling personnel.

  11. Advances in SSTR techniques for dosimetry and radiation damage measurements

    International Nuclear Information System (INIS)

    Gold, R.; Roberts, J.H.; Ruddy, F.H.

    1979-01-01

    Solid state track recorders (SSTR) have been applied in the diverse nuclear reactor research. Two recent advances are described which possess outstanding relevance for reactor research, namely the evolvement of SSTR radiation damage monitors and the development of CR-39, a new plastic SSTR of extremely high sensitivity. Results from high fluence irradiations of natural quartz crystal SSTR are used to illustrate the concept of the SSTR radiation damage monitor. Response characteristics of CR-39 are presented with emphasis on the remarkable proton sensitivity of this new SSTR

  12. Data fusion of multi-scale representations for structural damage detection

    Science.gov (United States)

    Guo, Tian; Xu, Zili

    2018-01-01

    Despite extensive researches into structural health monitoring (SHM) in the past decades, there are few methods that can detect multiple slight damage in noisy environments. Here, we introduce a new hybrid method that utilizes multi-scale space theory and data fusion approach for multiple damage detection in beams and plates. A cascade filtering approach provides multi-scale space for noisy mode shapes and filters the fluctuations caused by measurement noise. In multi-scale space, a series of amplification and data fusion algorithms are utilized to search the damage features across all possible scales. We verify the effectiveness of the method by numerical simulation using damaged beams and plates with various types of boundary conditions. Monte Carlo simulations are conducted to illustrate the effectiveness and noise immunity of the proposed method. The applicability is further validated via laboratory cases studies focusing on different damage scenarios. Both results demonstrate that the proposed method has a superior noise tolerant ability, as well as damage sensitivity, without knowing material properties or boundary conditions.

  13. Multi-physics damage sensing in nano-engineered structural composites

    International Nuclear Information System (INIS)

    De Villoria, Roberto Guzman; Yamamoto, Namiko; Miravete, Antonio; Wardle, Brian L

    2011-01-01

    Non-destructive evaluation techniques can offer viable diagnostic and prognostic routes to mitigating failures in engineered structures such as bridges, buildings and vehicles. However, existing techniques have significant drawbacks, including poor spatial resolution and limited in situ capabilities. We report here a novel approach where structural advanced composites containing electrically conductive aligned carbon nanotubes (CNTs) are ohmically heated via simple electrical contacts, and damage is visualized via thermographic imaging. Damage, in the form of cracks and other discontinuities, usefully increases resistance to both electrical and thermal transport in these materials, which enables tomographic full-field damage assessment in many cases. Characteristics of the technique include the ability for real-time measurement of the damage state during loading, low-power operation (e.g. 15 deg. C rise at 1 W), and beyond state-of-the-art spatial resolution for sensing damage in composites. The enhanced thermographic technique is a novel and practical approach for in situ monitoring to ascertain structural health and to prevent structural failures in engineered structures such as aerospace and automotive vehicles and wind turbine blades, among others.

  14. Thoracic damage control surgery.

    Science.gov (United States)

    Gonçalves, Roberto; Saad, Roberto

    2016-01-01

    The damage control surgery came up with the philosophy of applying essential maneuvers to control bleeding and abdominal contamination in trauma patients who are within the limits of their physiological reserves. This concept was extended to thoracic injuries, where relatively simple maneuvers can shorten operative time of in extremis patients. This article aims to revise the various damage control techniques in thoracic organs that must be known to the surgeon engaged in emergency care. RESUMO A cirurgia de controle de danos surgiu com a filosofia de se aplicar manobras essenciais para controle de sangramento e contaminação abdominal, em doentes traumatizados, nos limites de suas reservas fisiológicas. Este conceito se estendeu para as lesões torácicas, onde manobras relativamente simples, podem abreviar o tempo operatório de doentes in extremis. Este artigo tem como objetivo, revisar as diversas técnicas de controle de dano em órgãos torácicos, que devem ser de conhecimento do cirurgião que atua na emergência.

  15. [Risk maps. The concept and the methodology for their development].

    Science.gov (United States)

    García Gómez, M M

    1994-01-01

    In this article the concept of risk map is revised. It is considered as an instrument for the knowledge of risks and damages in a certain environment. A historic revision is made analyzing the birth and evolution of the concept. Different experiences and types of maps in different countries are described. Finally the operative steps, the data sources and the risk indicators which should be used in Spain are included.

  16. Moral competence among nurses in Malawi: A concept analysis approach.

    Science.gov (United States)

    Maluwa, Veronica Mary; Gwaza, Elizabeth; Sakala, Betty; Kapito, Esnath; Mwale, Ruth; Haruzivishe, Clara; Chirwa, Ellen

    2018-01-01

    Nurses are expected to provide comprehensive, holistic and ethically accepted care according to their code of ethics and practice. However, in Malawi, this is not always the case. This article analyses moral competence concept using the Walker and Avant's strategy of concept analysis. The aim of this article is to analyse moral competence concept in relation to nursing practice and determine defining attributes, antecedents and consequences of moral competence in nursing practice. Analysis of moral competence concept was done using Walker and Avant's strategy of concept analysis. Deductive analysis was used to find the defining attributes of moral competence, which were kindness, compassion, caring, critical thinking, ethical decision making ability, problem solving, responsibility, discipline, accountability, communication, solidarity, honesty, and respect for human values, dignity and rights. The identified antecedents were personal, cultural and religious values; nursing ethics training, environment and guidance. The consequences of moral competence are team work spirit, effective communication, improved performance and positive attitudes in providing nursing care. Moral competence can therefore be used as a tool to improve care in nursing practice to meet patients' problems and needs and consequently increase public's satisfaction in Malawi.

  17. Combining Ecosystem Service and Critical Load Concepts for Resource Management and Public Policy

    Directory of Open Access Journals (Sweden)

    Timothy J. Sullivan

    2012-11-01

    Full Text Available Land management and natural resource public policy decision-making in the United States can benefit from two resource damage/recovery concepts: ecosystem service (ES and critical load (CL. The purpose of this paper is to suggest an integrated approach to the application of ES and CL principles for public land management and natural resource policy decision-making. One well known example that is appropriate for ES and CL evaluation is examined here: the acidification of soil and drainage water by atmospheric deposition of acidifying sulfur and nitrogen compounds. A conceptual framework illustrates how the ES and CL approaches can be combined in a way that enhances the strengths of each. This framework will aid in the process of translating ES and CL principles into land management and natural resource policy decision-making by documenting the impacts of pollution on environmental goods and services that benefit humans.

  18. Alternative fusion concepts

    International Nuclear Information System (INIS)

    Rostagni, G.

    1981-01-01

    The paper reports the discussions and statements made by the participants on the actual state and future of five different approaches on the fusion concept; they are the following: bumpy torus, reversed-field pinch, open-ended configurations, compact toroids and stellarators. Tables show for each concept parameters that represent the achieved results; data expected for future devices and extrapolations on reactor requirements are included

  19. Vibration analysis and vibration damage assessment in nuclear and process equipment

    International Nuclear Information System (INIS)

    Pettigrew, M.J.; Taylor, C.E.; Fisher, N.J.; Yetisir, M.; Smith, B.A.W.

    1997-01-01

    Component failures due to excessive flow-induced vibration are still affecting the performance and reliability of process and nuclear components. The purpose of this paper is to discuss flow-induced vibration analysis and vibration damage prediction. Vibration excitation mechanisms are described with particular emphasis on fluid elastic instability. The dynamic characteristics of process and power equipment are explained. The statistical nature of some parameters, in particular support conditions, is discussed. The prediction of fretting-wear damage is approached from several points-of-view. An energy approach to formulate fretting-wear damage is proposed. (author)

  20. ETHICAL FASHION CONCEPT AND DESIGNERS

    OpenAIRE

    Pinar GOKLUBERK OZLU; Kenan SAATCIOGLU

    2015-01-01

    Some problems like rapidly developing industrialization, irregular population growth, environmental pollution and to feel the impact of global warming as seriously, has been giving significant damage to the earth. People has realized that, after polluting to clean is harder than polluting of the measures to be taken before. And again people showed the sensitivity to the environment through different reactions and sanctions, took measures and created the new concepts about the enviroment. "Eth...

  1. Development and initial validation of the Localized Scleroderma Skin Damage Index and Physician Global Assessment of disease Damage: a proof-of-concept study

    Science.gov (United States)

    Vilaiyuk, Soamarat; Torok, Kathryn S.; Medsger, Thomas A.

    2010-01-01

    Objective. To develop and assess the psychometric properties of the Localized Scleroderma (LS) Skin Damage Index (LoSDI) and Physician Global Assessment of disease Damage (PGA-D). Methods. Damage was defined as irreversible/persistent changes (>6 months) due to previous active disease/complications of therapy. Eight rheumatologists assessed the importance of 17 variables in formulating the PGA-D/LoSDI. LS patients were evaluated by two rheumatologists using both tools to assess their psychometric properties. LoSDI was calculated by summing three scores for cutaneous features of damage [dermal atrophy (DAT), subcutaneous atrophy (SAT) and dyspigmentation (DP)] measured at 18 anatomic sites. Patient GA of disease severity (PtGA-S), Children's Dermatology Life Quality Index (CDLQI) and PGA-D were recorded at the time of each examination. Results. Thirty LS patients (112 lesions) and nine patient-visit pairs (18 lesions) were included for inter- and intra-rater reliability study. LoSDI and its domains DAT, SAT, DP and PGA-D demonstrated excellent inter- and intra-rater reliability (reliability coefficients 0.86–0.99 and 0.74–0.96, respectively). LoSDI correlated moderately with PGA-D and poorly with PtGA-S and CDLQI. PGA-D correlated moderately with PtGA-S, but poorly with CDLQI. Conclusions. To complete the LS Cutaneous Assessment Tool (LoSCAT), we developed and evaluated the psychometric properties of the LoSDI and PGA-D in addition to the LS Skin Severity Index (LoSSI). These instruments will facilitate evaluation of LS patients for individual patient management and clinical trials. LoSDI and PGA-D demonstrated excellent reliability and high validity. LoSCAT provides an improved understanding of LS natural history. Further study in a larger group of patients is needed to confirm these preliminary findings. PMID:20008472

  2. The Effect of Cooperative Learning Approach Based on Conceptual Change Condition on Students' Understanding of Chemical Equilibrium Concepts

    Science.gov (United States)

    Bilgin, Ibrahim; Geban, Omer

    2006-01-01

    The purpose of this study is to investigate the effects of the cooperative learning approach based on conceptual change conditions over traditional instruction on 10th grade students' conceptual understanding and achievement of computational problems related to chemical equilibrium concepts. The subjects of this study consisted of 87 tenth grade…

  3. Conceptions of health service robots

    DEFF Research Database (Denmark)

    Lystbæk, Christian Tang

    2015-01-01

    Technology developments create rich opportunities for health service providers to introduce service robots in health care. While the potential benefits of applying robots in health care are extensive, the research into the conceptions of health service robot and its importance for the uptake...... of robotics technology in health care is limited. This article develops a model of the basic conceptions of health service robots that can be used to understand different assumptions and values attached to health care technology in general and health service robots in particular. The article takes...... a discursive approach in order to develop a conceptual framework for understanding the social values of health service robots. First a discursive approach is proposed to develop a typology of conceptions of health service robots. Second, a model identifying four basic conceptions of health service robots...

  4. Durability and damage tolerance of Large Composite Primary Aircraft Structure (LCPAS)

    Science.gov (United States)

    Mccarty, John E.; Roeseler, William G.

    1984-01-01

    Analysis and testing addressing the key technology areas of durability and damage tolerance were completed for wing surface panels. The wing of a fuel-efficient, 200-passenger commercial transport airplane for 1990 delivery was sized using graphite-epoxy materials. Coupons of various layups used in the wing sizing were tested in tension, compression, and spectrum fatigue with typical fastener penetrations. The compression strength after barely visible impact damage was determined from coupon and structural element tests. One current material system and one toughened system were evaluated by coupon testing. The results of the coupon and element tests were used to design three distinctly different compression panels meeting the strength, stiffness, and damage-tolerance requirements of the upper wing panels. These three concepts were tested with various amounts of damage ranging from barely visible impact to through-penetration. The results of this program provide the key technology data required to assess the durability and damage-tolerance capability or advanced composites for use in commercial aircraft wing panel structure.

  5. From Physical Process to Economic Cost - Integrated Approaches of Landslide Risk Assessment

    Science.gov (United States)

    Klose, M.; Damm, B.

    2014-12-01

    The nature of landslides is complex in many respects, with landslide hazard and impact being dependent on a variety of factors. This obviously requires an integrated assessment for fundamental understanding of landslide risk. Integrated risk assessment, according to the approach presented in this contribution, implies combining prediction of future landslide occurrence with analysis of landslide impact in the past. A critical step for assessing landslide risk in integrated perspective is to analyze what types of landslide damage affected people and property in which way and how people contributed and responded to these damage types. In integrated risk assessment, the focus is on systematic identification and monetization of landslide damage, and analytical tools that allow deriving economic costs from physical landslide processes are at the heart of this approach. The broad spectrum of landslide types and process mechanisms as well as nonlinearity between landslide magnitude, damage intensity, and direct costs are some main factors explaining recent challenges in risk assessment. The two prevailing approaches for assessing the impact of landslides in economic terms are cost survey (ex-post) and risk analysis (ex-ante). Both approaches are able to complement each other, but yet a combination of them has not been realized so far. It is common practice today to derive landslide risk without considering landslide process-based cause-effect relationships, since integrated concepts or new modeling tools expanding conventional methods are still widely missing. The approach introduced in this contribution is based on a systematic framework that combines cost survey and GIS-based tools for hazard or cost modeling with methods to assess interactions between land use practices and landslides in historical perspective. Fundamental understanding of landslide risk also requires knowledge about the economic and fiscal relevance of landslide losses, wherefore analysis of their

  6. Psychodynamic therapy from the perspective of self-organization. a concept of change and a methodological approach for empirical examination.

    Science.gov (United States)

    Gumz, Antje; Geyer, Michael; Brähler, Elmar

    2014-01-01

    Observations from therapeutic practice and a series of empirical findings, for example, those on discontinuous change in psychotherapeutic processes, suggest modelling the therapeutic process as a self-organizing system with stable and critical instable phases and abrupt transitions. Here, a concept of psychotherapeutic change is presented that applies self-organization theory to psychodynamic principles. The authors explain the observations and considerations that form the basis of the concept and present some connections with existing findings and concepts. On the basis of this model, they generated two hypotheses regarding the co-occurrence of instability and discontinuous change and the degree of synchrony between the therapist and patient. A study design to test these hypotheses was developed and applied to a single case (psychodynamic therapy). After each session, patient and therapist rated their interaction. A measure of instability was calculated across the resulting time series. Sequences of destabilization were observed. On the basis of points of extreme instability, the process was divided into phases. Local instability maxima were accompanied by significant discontinuous change. Destabilization was highly synchronous in therapist and patient ratings. The authors discussed the concept and the methodological procedure. The approach enables the operationalization of crises and to empirically assess the significance of critical phases and developments within the therapeutic relationship. We present a concept of change that applies self-organization theory to psychodynamic therapy. We empirically tested the hypotheses formulated in the concept based on an extract of 125 long-term psychodynamic therapy sessions. We continuously monitored the therapeutic interaction and calculated a measure of the instability of the assessments. We identified several sequences of stable and unstable episodes. Episodes of high instability were accompanied by discontinuous

  7. Contextualizing aquired brain damage

    DEFF Research Database (Denmark)

    Nielsen, Charlotte Marie Bisgaard

    2014-01-01

    Contextualizing aquired brain damage Traditional approaches study ’communicational problems’ often in a discourse of disabledness or deficitness. With an ontology of communcation as something unique and a presupposed uniqueness of each one of us, how could an integrational approach (Integrational...... for people with aquired brain injuries will be presented and comparatively discussed in a traditional versus an integrational perspective. Preliminary results and considerations on ”methods” and ”participation” from this study will be presented along with an overview of the project's empirical data....

  8. A semantic approach to concept lattice-based information retrieval

    OpenAIRE

    Codocedo , Victor; Lykourentzou , Ioanna; Napoli , Amedeo

    2014-01-01

    International audience; The volume of available information is growing, especially on the web, and in parallel the questions of the users are changing and becoming harder to satisfy. Thus there is a need for organizing the available information in a meaningful way in order to guide and improve document indexing for information retrieval applications taking into account more complex data such as semantic relations. In this paper we show that Formal Concept Analysis (FCA) and concept lattices p...

  9. Implementation of cooperative learning model type STAD with RME approach to understanding of mathematical concept student state junior high school in Pekanbaru

    Science.gov (United States)

    Nurhayati, Dian Mita; Hartono

    2017-05-01

    This study aims to determine whether there is a difference in the ability of understanding the concept of mathematics between students who use cooperative learning model Student Teams Achievement Division type with Realistic Mathematic Education approach and students who use regular learning in seventh grade SMPN 35 Pekanbaru. This study was quasi experiments with Posttest-only Control Design. The populations in this research were all the seventh grade students in one of state junior high school in Pekanbaru. The samples were a class that is used as the experimental class and one other as the control class. The process of sampling is using purposive sampling technique. Retrieval of data in this study using the documentation, observation sheets, and test. The test use t-test formula to determine whether there is a difference in student's understanding of mathematical concepts. Before the t-test, should be used to test the homogeneity and normality. Based in the analysis of these data with t0 = 2.9 there is a difference in student's understanding of mathematical concepts between experimental and control class. Percentage of students experimental class with score more than 65 was 76.9% and 56.4% of students control class. Thus be concluded, the ability of understanding mathematical concepts students who use the cooperative learning model type STAD with RME approach better than students using the regular learning. So that cooperative learning model type STAD with RME approach is well used in learning process.

  10. Assessing environmental vulnerability in EIA-The content and context of the vulnerability concept in an alternative approach to standard EIA procedure

    International Nuclear Information System (INIS)

    Kvaerner, Jens; Swensen, Grete; Erikstad, Lars

    2006-01-01

    In the traditional EIA procedure environmental vulnerability is only considered to a minor extent in the early stages when project alternatives are worked out. In Norway, an alternative approach to EIA, an integrated vulnerability model (IVM), emphasising environmental vulnerability and alternatives development in the early stages of EIA, has been tried out in a few pilot cases. This paper examines the content and use of the vulnerability concept in the IVM approach, and discusses the concept in an EIA context. The vulnerability concept is best suited to overview analyses and large scale spatial considerations. The concept is particularly useful in the early stages of EIA when alternatives are designed and screened. By introducing analyses of environmental vulnerability at the start of the EIA process, the environment can be a more decisive issue for the creation of project alternatives as well as improving the basis for scoping. Vulnerability and value aspects should be considered as separate dimensions. There is a need to operate with a specification between general and specific vulnerability. The concept of environmental vulnerability has proven useful in a wide range of disciplines. Different disciplines have different lengths of experience regarding vulnerability. In disciplines such as landscape planning and hydrogeology we find elements suitable as cornerstones in the further development of an interdisciplinary methodology. Further development of vulnerability criteria in different disciplines and increased public involvement in the early stages of EIA are recommended

  11. Time reversed Lamb wave for damage detection in a stiffened aluminum plate

    International Nuclear Information System (INIS)

    Bijudas, C R; Mitra, M; Mujumdar, P M

    2013-01-01

    According to the concept of time reversibility of the Lamb wave, in the absence of damage, a Lamb wave signal can be reconstructed at the transmitter location if a time reversed signal is sent back from the receiver location. This property is used for baseline-free damage detection, where the presence of damage breaks down the time reversibility and the mismatch between the reconstructed and the input signal is inferred as the presence of damage. This paper presents an experimental and a simulation study of baseline-free damage detection in a stiffened aluminum plate by time reversed Lamb wave (TRLW). In this study, single Lamb wave mode (A 0 ) is generated and sensed using piezoelectric (PZT) transducers through specific transducer placement and amplitude tuning. Different stiffening configurations such as plane and T-stiffeners are considered. Damage cases of disbonding of stiffeners from the base plate, and vertical and embedded cracks in the stiffened plate, are studied. The results show that TRLW based schemes can efficiently identify the presence of damage in a stiffened plate. (paper)

  12. Fourth-order Perturbed Eigenvalue Equation for Stepwise Damage Detection of Aeroplane Wing

    Directory of Open Access Journals (Sweden)

    Wong Chun Nam

    2016-01-01

    Full Text Available Perturbed eigenvalue equations up to fourth-order are established to detect structural damage in aeroplane wing. Complete set of perturbation terms including orthogonal and non-orthogonal coefficients are computed using perturbed eigenvalue and orthonormal equations. Then the perturbed eigenparameters are optimized using BFGS approach. Finite element model with small to large stepwise damage is used to represent actual aeroplane wing. In small damaged level, termination number is the same for both approaches, while rms errors and termination d-norms are very close. For medium damaged level, termination number is larger for third-order perturbation with lower d-norm and smaller rms error. In large damaged level, termination number is much larger for third-order perturbation with same d-norm and larger rms error. These trends are more significant as the damaged level increases. As the stepwise damage effect increases with damage level, the increase in stepwise effect leads to the increase in model order. Hence, fourth-order perturbation is more accurate to estimate the model solution.

  13. On the Concept of Energy: Eclecticism and Rationality

    Science.gov (United States)

    Coelho, Ricardo Lopes

    2014-06-01

    In the theory of heat of the first half of the nineteenth century, heat was a substance. Mayer and Joule contradicted this thesis but developed different concepts of heat. Heat was a force for Mayer and a motion for Joule. Both Mayer and Joule determined the mechanical equivalent of heat. This result was, however, justified in accordance with those concepts of heat. Mayer's characterisation of force reappears in the very common textbook definition `energy cannot be created or destroyed but only transformed' and his theory led to a phenomenological approach to energy. Joule and Thomson's concept of heat led to a mechanistic approach to energy and to the common definition `energy is the capacity of doing work'. One and the same term `energy' subsumed these two approaches. The problematic concept of energy, energy as a substance, appears then as a result of an eclectic development of the concept. Another approach, which appeared in the 1860s, is directly based on the mechanical equivalent of heat and can be characterized by the use of `principle of equivalence' instead of `principle of energy conservation'. Unlike the others, this approach, which has been lost, poses no problems with the concept of energy. The problems with the energy concept as to the kind of phenomena dealt with in the present paper can, however, be overcome, as we shall see, in distinguishing between that which comes from experiments and that which is an interpretation of the experimental results within a conceptual framework.

  14. On the Way of Educational Reform: Thai High School Physics Teachers' Conceptions of the Student-Centered Approach and Their Perceptions of Their Classroom Practices

    Science.gov (United States)

    Chaumklang, Kawin

    During the past two decades, the student-centered approach has been widely promoted and accepted by the educational community as one of the most effective instructional approaches. It has been continually developed and revised to match our current understanding of how humans learn (American Psychological Association, 1997). It is based upon the belief that students should take responsibility for their own learning. Thus, curriculum, instruction, and assessment should be carefully designed to stimulate, facilitate, and accelerate students' learning as much as possible. In order to do so, the teacher needs to take the following factors into consideration: students' cognitive structures, metacognitive and regulative skills, motivation and affective states, developmental and individual differences, and social supports. However, the term student-centered has been defined and described by researchers and scholars in many different ways. Little is known about how practicing teachers conceptualize this term and how they perceive their classroom practices in relation to these conceptions. The purpose of this study was to utilize a qualitative multiple-case study approach to investigate teachers' conceptions of the student-centered approach and their perceptions of their classroom practices. Four Thai high school physics teachers, who were considered products of the current student-centered educational reform movement in Thailand, participated in this study. Data were collected for one learning unit (three to eight weeks) through classroom observations, semi-structured interviews, and document analysis. The data analysis revealed that teachers' conceptions of student-centered curriculum, instruction, and assessment had three common characteristics: (a) students' active participation; (b) special emphasis on students' background knowledge, understanding, motivation, affective states, and learning capability; and (c) benefits to students. The results also indicated that there

  15. Fatigue damage mechanics of notched graphite-epoxy laminates

    Science.gov (United States)

    Spearing, Mark; Beaumont, Peter W. R.; Ashby, Michael F.

    A modeling approach is presented that recognizes that the residual properties of composite laminates after any form of loading depend on the damage state. Therefore, in the case of cyclic loading, it is necessary to first derive a damage growth law and then relate the residual properties to the accumulated damage. The propagation of fatigue damage in notched laminates is investigated. A power law relationship between damage growth and the strain energy release rate is developed. The material constants used in the model have been determined in independent experiments and are invariant for all the layups investigated. The strain energy release rates are calculated using a simple finite element representation of the damaged specimen. The model is used to predict the effect of tension-tension cyclic loading on laminates of the T300/914C carbon-fiber epoxy system. The extent of damage propagation is successfully predicted in a number of cross-ply laminates.

  16. Seismic damage assessment of reinforced concrete containment structures

    International Nuclear Information System (INIS)

    Cho, HoHyun; Koh, Hyun-Moo; Hyun, Chang-Hun; Kim, Moon-Soo; Shin, Hyun Mock

    2003-01-01

    This paper presents a procedure for assessing seismic damage of concrete containment structures using the nonlinear time-history numerical analysis. For this purpose, two kinds of damage index are introduced at finite element and structural levels. Nonlinear finite element analysis for the containment structure applies PSC shell elements using a layered approach leading to damage indices at finite element and structural levels, which are then used to assess the seismic damage of the containment structure. As an example of such seismic damage assessment, seismic damages of the containment structure of Wolsong I nuclear power plant in Korea are evaluated against 30 artificial earthquakes generated with a wide range of PGA according to US NRC regulatory guide 1.60. Structural responses and corresponding damage index according to the level of PGA and nonlinearity are investigated. It is also shown that the containment structure behaves elastically for earthquakes corresponding to or lower than DBE. (author)

  17. RENAL DAMAGE WITH MALIGNANT NEOPLASMS

    Directory of Open Access Journals (Sweden)

    I. B. Kolina

    2015-01-01

    Full Text Available The relationship between renal damage and malignant neoplasms is one of the most actual problems of the medicine of internal diseases. Very often, exactly availability of renal damage determines the forecast of cancer patients. The range of renal pathologies associated with tumors is unusually wide: from the mechanical effect of the tumor or metastases on the kidneys and/or the urinary tract and paraneoplastic manifestations in the form of nephritis or amyloidosis to nephropathies induced with drugs or tumor lysis, etc. Thrombotic complications that develop as a result of exposure to tumor effects, side effects of certain drugs or irradiation also play an important role in the development of the kidney damage. The most frequent variants of renal damage observed in the practice of medical internists (therapists, urologists, surgeons, etc., as well as methods of diagnosis and treatment approaches are described in the article. Timely and successful prevention and treatment of tumor-associated nephropathies give hope for retaining renal functions, therefore, a higher life standard after completion of anti-tumor therapy. Even a shortterm episode of acute renal damage suffered by a cancer patient must be accompanied with relevant examination and treatment. In the caseof transformation of acute renal damage into the chronic kidney disease, such patients need systematic and weighted renoprotective therapy and correct dosing of nephrotoxic drugs.

  18. On the Role of Discipline-Related Self-Concept in Deep and Surface Approaches to Learning among University Students

    Science.gov (United States)

    Platow, Michael J.; Mavor, Kenneth I.; Grace, Diana M.

    2013-01-01

    The current research examined the role that students' discipline-related self-concepts may play in their deep and surface approaches to learning, their overall learning outcomes, and continued engagement in the discipline itself. Using a cross-lagged panel design of first-year university psychology students, a causal path was observed in which…

  19. Increasing Educational Achievement via Self Concept Change.

    Science.gov (United States)

    Scheirer, Mary Ann; Kraut, Robert E.

    1979-01-01

    Literature linking self-concept and achievement, and evaluation research on educational programs to improve self-concept are analyzed in terms of several self-concept theories. Evidence for a causal connection between self-concept and achievement is negative. Researchers have failed to explore other theoretical approaches to educational change.…

  20. Damage Detection in an Offshore Structure

    DEFF Research Database (Denmark)

    Brincker, Rune; Kirkegaard, Poul Henning; Andersen, P.

    The structural integrity of a multi-pile offshore platform is investigated by using a vibration based damage detection scheme. Changes in structural integrity are assumed to be reflected in the modal parameters estimated from only output data using an Auto-Regressive Moving Average (ARMA) model....... By use of the estimates of the modal parameters and their corresponding variances a probability based damage indicator is formulated. This approach indicates, that since the construction of the platform, minor structural changes have taken place....

  1. Damage Detection in an Offshore Structure

    DEFF Research Database (Denmark)

    Brincker, Rune; Kirkegaard, Poul Henning; Andersen, Palle

    1995-01-01

    The structural integrity of a multi-pile offshore platform is investigated by using a vibration based damage detection scheme. Changes in structural integrity are assumed to be reflected in the modal parameters estimated from only output data using an Auto-Regressive Moving Average (ARMA) model....... By use of the estimates of the modal parameters and their corresponding variances a probability based damage indicator is formulated. This approach indicates, that since the construction of the platform, minor structural changes have taken place....

  2. Concept theory and semiotics in knowledge organization

    DEFF Research Database (Denmark)

    Friedman, Alon; Thellefsen, Martin

    2011-01-01

    Purpose - The paper explores the basics of semiotic analysis and concept theory that represents two dominant approaches to knowledge representation, and explores how these approaches are fruitful for knowledge organization. Design/methodology/approach - In particular the semiotic theory formulated....../value - This paper is the first paper that combines theories of knowledge representation, semiotic and concept theory, within the context of knowledge organization....... by the American philosopher C.S. Peirce and the concept theory formulated by Ingetraut Dahlberg is investigated. The objective of this paper is to compare the differences and similarities between these two theories of knowledge representation. Findings - The semiotic model is a general and unrestricted model...

  3. A durability model incorporating safe life methodology and damage tolerance approach to assess first inspection and maintenance period for structures

    International Nuclear Information System (INIS)

    Xiong, J.J.; Shenoi, R.A.

    2009-01-01

    This paper outlines a new durability model to assess the first inspection and maintenance period for structures. Practical scatter factor formulae are presented to determine the safe fatigue crack initiation and propagation lives from the results of a single full-scale test of a complete structure. New theoretical solutions are proposed to determine the s a -s m -N surfaces of fatigue crack initiation and propagation. Prediction techniques are then developed to establish the relationship equation between safe fatigue crack initiation and propagation lives with a specific reliability level using a two-stage fatigue damage cumulative rule. A new durability model incorporating safe life and damage tolerance design approaches is derived to assess the first inspection and maintenance period. Finally, the proposed models are applied to assess the first inspection and maintenance period of a fastening structure at the root of helicopter blade.

  4. Department of Energy low-level radioactive waste disposal concepts

    International Nuclear Information System (INIS)

    Ozaki, C.; Page, L.; Morreale, B.; Owens, C.

    1990-01-01

    The Department of Energy manages its low-level waste (LLW), regulated by DOE Order 5820.2A by using an overall systems approach. This systems approach provides an improved and consistent management system for all DOE LLW waste, from generation to disposal. This paper outlines six basic disposal concepts used in the systems approach, discusses issues associated with each of the concepts, and outlines both present and future disposal concepts used at six DOE sites

  5. Proceedings of damage and oxidation protection in high temperature composites

    International Nuclear Information System (INIS)

    Haritos, G.K.; Ochoa, O.O.

    1991-01-01

    This book contains proceedings of Damage and Oxidation Protection in High Temperature Composites. Topics covered include: current issues in the development of new materials and structural concepts for the aerospace structures of the future; transportation vehicles of the future; materials and structural concepts; fundamental understanding and quantitative descriptions of the physical processes and mechanisms controlling the behavior of emerging materials and structures; and the critical need for advances in our understanding of how the interaction of service loads and environment influences the lifecycle of emerging structures and materials

  6. Transferring the Integrated Pollution Prevention and Control (IPPC Approach and Best Available Techniques (BAT Concepts to Egypt, Tunisia and Morocco

    Directory of Open Access Journals (Sweden)

    Víctor Vázquez Calvo

    2013-07-01

    Full Text Available The principles introduced by the Directive Concerning Integrated Pollution Prevention and Control (IPPC (currently known as the Industrial Emissions Directive (2010/75/EU are innovative and have raised interests in the framework of the literature debate on environmental regulation. Many articles describe and analyze the application of the Directive in European countries, but only a few articles focus on how the interest for the Directive’s principles, including the integrated approach, have reached countries outside the European Union. This paper aims to contribute to this topic, describing the experience of the authors in carrying out an EU-funded project on transferring the IPPC approach and Best Available Techniques (BAT concepts to three Arab countries, i.e., Egypt, Morocco and Tunisia. The paper presents the experience referring to two sectors falling within the scope of the IPPC Directive: the textile and dairy sector. The objectives, methodologies, activities and experiences are described and can be used and valorized to integrate the IPPC approach and BAT concepts in the current environmental legislation of the three countries.

  7. New Experiments and a Model-Driven Approach for Interpreting Middle Stone Age Lithic Point Function Using the Edge Damage Distribution Method.

    Science.gov (United States)

    Schoville, Benjamin J; Brown, Kyle S; Harris, Jacob A; Wilkins, Jayne

    2016-01-01

    The Middle Stone Age (MSA) is associated with early evidence for symbolic material culture and complex technological innovations. However, one of the most visible aspects of MSA technologies are unretouched triangular stone points that appear in the archaeological record as early as 500,000 years ago in Africa and persist throughout the MSA. How these tools were being used and discarded across a changing Pleistocene landscape can provide insight into how MSA populations prioritized technological and foraging decisions. Creating inferential links between experimental and archaeological tool use helps to establish prehistoric tool function, but is complicated by the overlaying of post-depositional damage onto behaviorally worn tools. Taphonomic damage patterning can provide insight into site formation history, but may preclude behavioral interpretations of tool function. Here, multiple experimental processes that form edge damage on unretouched lithic points from taphonomic and behavioral processes are presented. These provide experimental distributions of wear on tool edges from known processes that are then quantitatively compared to the archaeological patterning of stone point edge damage from three MSA lithic assemblages-Kathu Pan 1, Pinnacle Point Cave 13B, and Die Kelders Cave 1. By using a model-fitting approach, the results presented here provide evidence for variable MSA behavioral strategies of stone point utilization on the landscape consistent with armature tips at KP1, and cutting tools at PP13B and DK1, as well as damage contributions from post-depositional sources across assemblages. This study provides a method with which landscape-scale questions of early modern human tool-use and site-use can be addressed.

  8. An Innovative Approach to Control Steel Reinforcement Corrosion by Self-Healing

    Directory of Open Access Journals (Sweden)

    Dessi A. Koleva

    2018-02-01

    Full Text Available The corrosion of reinforced steel, and subsequent reinforced concrete degradation, is a major concern for infrastructure durability. New materials with specific, tailor-made properties or the establishment of optimum construction regimes are among the many approaches to improving civil structure performance. Ideally, novel materials would carry self-repairing or self-healing capacities, triggered in the event of detrimental influence and/or damage. Controlling or altering a material’s behavior at the nano-level would result in traditional materials with radically enhanced properties. Nevertheless, nanotechnology applications are still rare in construction, and would break new ground in engineering practice. An approach to controlling the corrosion-related degradation of reinforced concrete was designed as a synergetic action of electrochemistry, cement chemistry and nanotechnology. This contribution presents the concept of the approach, namely to simultaneously achieve steel corrosion resistance and improved bulk matrix properties. The technical background and challenges for the application of polymeric nanomaterials in the field are briefly outlined in view of this concept, which has the added value of self-healing. The credibility of the approach is discussed with reference to previously reported outcomes, and is illustrated via the results of the steel electrochemical responses and microscopic evaluations of the discussed materials.

  9. An Innovative Approach to Control Steel Reinforcement Corrosion by Self-Healing

    Science.gov (United States)

    2018-01-01

    The corrosion of reinforced steel, and subsequent reinforced concrete degradation, is a major concern for infrastructure durability. New materials with specific, tailor-made properties or the establishment of optimum construction regimes are among the many approaches to improving civil structure performance. Ideally, novel materials would carry self-repairing or self-healing capacities, triggered in the event of detrimental influence and/or damage. Controlling or altering a material’s behavior at the nano-level would result in traditional materials with radically enhanced properties. Nevertheless, nanotechnology applications are still rare in construction, and would break new ground in engineering practice. An approach to controlling the corrosion-related degradation of reinforced concrete was designed as a synergetic action of electrochemistry, cement chemistry and nanotechnology. This contribution presents the concept of the approach, namely to simultaneously achieve steel corrosion resistance and improved bulk matrix properties. The technical background and challenges for the application of polymeric nanomaterials in the field are briefly outlined in view of this concept, which has the added value of self-healing. The credibility of the approach is discussed with reference to previously reported outcomes, and is illustrated via the results of the steel electrochemical responses and microscopic evaluations of the discussed materials. PMID:29461495

  10. Identifying Threshold Concepts for Information Literacy: A Delphi Study

    OpenAIRE

    Lori Townsend; Amy R. Hofer; Silvia Lin Hanick; Korey Brunetti

    2016-01-01

    This study used the Delphi method to engage expert practitioners on the topic of threshold concepts for information literacy. A panel of experts considered two questions. First, is the threshold concept approach useful for information literacy instruction? The panel unanimously agreed that the threshold concept approach holds potential for information literacy instruction. Second, what are the threshold concepts for information literacy instruction? The panel proposed and discussed over fift...

  11. DNA damage by Auger emitters

    International Nuclear Information System (INIS)

    Martin, R.F.; d'Cunha, Glenn; Gibbs, Richard; Murray, Vincent; Pardee, Marshall; Allen, B.J.

    1988-01-01

    125 I atoms can be introduced at specific locations along a defined DNA target molecule, either by site-directed incorporation of an 125 I-labelled deoxynucleotide or by binding of an 125 I-labelled sequence-selective DNA ligand. After allowing accumulation of 125 I decay-induced damage to the DNA, application of DNA sequencing techniques enables positions of strand breaks to be located relative to the site of decay, at a resolution corresponding to the distance between adjacent nucleotides [0.34 nm]. Thus, DNA provides a molecular framework to analyse the extent of damage following [averaged] individual decay events. Results can be compared with energy deposition data generated by computer-simulation methods developed by Charlton et al. The DNA sequencing technique also provides information about the chemical nature of the termini of the DNA chains produced following Auger decay-induced damage. In addition to reviewing the application of this approach to the analysis of 125 I decay induced DNA damage, some more recent results obtained by using 67 Ga are also presented. (author)

  12. From Product to System Approaches in European Sustainable Product Policies: Analysis of the Package Concept of Heating Systems in Buildings

    Directory of Open Access Journals (Sweden)

    Maria Calero-Pastor

    2017-09-01

    Full Text Available Different policies with the goal of reducing energy consumption and other environmental impacts in the building sector coexist in Europe. Sustainable product polices, such as the Ecodesign and Energy Labelling Directives, have recently broadened the scope of their target product groups from a strict product approach to extended product and system approaches. Indeed, there is a potential for greater savings when the focus is at a system level rather than on regulating individual products. Product policies for space and water heating systems have recently introduced and implemented the package label, which is a modular approach, standing between the extended product and the system approaches. This paper presents a systematic analysis of the different system approaches of various policies from an engineering perspective. It analyses in detail the package concept and its features through a practical application using a real case study. It focuses on how the package concept can support decisions made in the building design phase and, in particular, how can support the choice of appropriate components based on estimating system performances. This brings building engineers and regulators closer regarding the use of more consistent data on energy performance. Finally, this paper highlights the need to improve the alignment of the building-related product policies with the Energy Performance of Buildings Directive.

  13. Concept-Based Content of Professional Linguistic Education

    Science.gov (United States)

    Makshantseva, Nataliia Veniaminovna; Bankova, Liudmila Lvovna

    2016-01-01

    The article deals with professional education of future linguists built on the basis of conceptual approach. The topic is exemplified by the Russian language and a successful attempt to implement the concept-based approach to forming the content of professional language education. Within the framework of the proposed research, the concept is…

  14. Predicting Turkish Preservice Elementary Teachers' Orientations to Teaching Science with Epistemological Beliefs, Learning Conceptions, and Learning Approaches in Science

    Science.gov (United States)

    Sahin, Elif Adibelli; Deniz, Hasan; Topçu, Mustafa Sami

    2016-01-01

    The present study investigated to what extent Turkish preservice elementary teachers' orientations to teaching science could be explained by their epistemological beliefs, conceptions of learning, and approaches to learning science. The sample included 157 Turkish preservice elementary teachers. The four instruments used in the study were School…

  15. Lattice damage in ion-implanted silicon-germanium alloys

    International Nuclear Information System (INIS)

    Haynes, T.E.; Holland, O.W.

    1992-08-01

    The damage produced in Si 1-x Ge x alloys (0≤x≤1) by implantation of 70--100 keV 30 Si + has been measured as a function of temperature and fluence by ion channeling. For all compositions, the damage efficiency decreased sharply as the implant temperature was increased between room temperature and 150 degrees C. Furthermore, the damage efficiency in alloys of intermediate compositions (0.34≤x≤0.5) exceeds that in Ge, especially at elevated temperatures, despite the larger cascade energy density in Ge. It is shown that this behavior can be described based on a model in which the point-defect mobility is the dominant factor controlling damage retention, rather than the cascade energy density. This approach provides a framework for understanding other temperature-dependent phenomena related to damage growth in Si-Ge alloys including dose-rate effects and damage saturation in MeV implantation

  16. The Use of History and Philosophy of Science as a Core for a Socioconstructivist Teaching Approach of the Concept of Energy in Primary Education

    Science.gov (United States)

    Rizaki, Aikaterini; Kokkotas, Panagiotis

    2013-01-01

    The present study should be thought as a socioconstructivist teaching approach (a teaching model) for the concept of energy in primary education. It contains important and crucial aspects of the History and Philosophy of Natural Sciences, introduces the concept of energy using the macroscopic framework of thermodynamics, takes into consideration…

  17. Continuum damage mechanics method for fatigue growth of surface cracks

    International Nuclear Information System (INIS)

    Feng Xiqiao; He Shuyan

    1997-01-01

    With the background of leak-before-break (LBB) analysis of pressurized vessels and pipes in nuclear plants, the fatigue growth problem of either circumferential or longitudinal semi-elliptical surface cracks subjected to cyclic loading is studied by using a continuum damage mechanics method. The fatigue damage is described by a scalar damage variable. From the damage evolution equation at the crack tip, a crack growth equation similar to famous Paris' formula is derived, which shows the physical meaning of Paris' formula. Thereby, a continuum damage mechanics approach is developed to analyze the configuration evolution of surface cracks during fatigue growth

  18. Metabolite Damage and Metabolite Damage Control in Plants

    Energy Technology Data Exchange (ETDEWEB)

    Hanson, Andrew D. [Horticultural Sciences Department and; Henry, Christopher S. [Mathematics and Computer Science Division, Argonne National Laboratory, Argonne, Illinois 60439, email:; Computation Institute, University of Chicago, Chicago, Illinois 60637; Fiehn, Oliver [Genome Center, University of California, Davis, California 95616, email:; de Crécy-Lagard, Valérie [Microbiology and Cell Science Department, University of Florida, Gainesville, Florida 32611, email: ,

    2016-04-29

    It is increasingly clear that (a) many metabolites undergo spontaneous or enzyme-catalyzed side reactions in vivo, (b) the damaged metabolites formed by these reactions can be harmful, and (c) organisms have biochemical systems that limit the buildup of damaged metabolites. These damage-control systems either return a damaged molecule to its pristine state (metabolite repair) or convert harmful molecules to harmless ones (damage preemption). Because all organisms share a core set of metabolites that suffer the same chemical and enzymatic damage reactions, certain damage-control systems are widely conserved across the kingdoms of life. Relatively few damage reactions and damage-control systems are well known. Uncovering new damage reactions and identifying the corresponding damaged metabolites, damage-control genes, and enzymes demands a coordinated mix of chemistry, metabolomics, cheminformatics, biochemistry, and comparative genomics. This review illustrates the above points using examples from plants, which are at least as prone to metabolite damage as other organisms.

  19. On a new law of bone remodeling based on damage elasticity: a thermodynamic approach

    Directory of Open Access Journals (Sweden)

    Idhammad Ahmed

    2012-11-01

    Full Text Available Abstract Background Bone tissue is the main element of the human skeleton and is a dynamic tissue that is continuously renewed by bone-resorbing osteoclasts and bone-forming osteoblasts. The bone is also capable of repairing itself and adapting its structure to changes in its load environment through the process of bone remodeling. Therefore, this phenomenon has been gaining increasing interest in the last years and many laws have been developed in order to simulate this process. Results In this paper, we develop a new law of bone remodeling in the context of damaged elastic by applying the thermodynamic approach in the case of small perturbations. The model is solved numerically by a finite difference method in the one-dimensional bone structure of a n-unit elements model. Conclusion In addition, several numerical simulations are presented that confirm the accuracy and effectiveness of the model.

  20. Cohesive Laws and Progressive Damage Analysis of Composite Bonded Joints, a Combined Numerical/Experimental Approach

    Science.gov (United States)

    Girolamo, Donato; Davila, Carlos G.; Leone, Frank A.; Lin, Shih-Yung

    2015-01-01

    The results of an experimental/numerical campaign aimed to develop progressive damage analysis (PDA) tools for predicting the strength of a composite bonded joint under tensile loads are presented. The PDA is based on continuum damage mechanics (CDM) to account for intralaminar damage, and cohesive laws to account for interlaminar and adhesive damage. The adhesive response is characterized using standard fracture specimens and digital image correlation (DIC). The displacement fields measured by DIC are used to calculate the J-integrals, from which the associated cohesive laws of the structural adhesive can be derived. A finite element model of a sandwich conventional splice joint (CSJ) under tensile loads was developed. The simulations, in agreement with experimental tests, indicate that the model is capable of predicting the interactions of damage modes that lead to the failure of the joint.

  1. Approaches to understand culture

    DEFF Research Database (Denmark)

    Rasmussen, Lauge Baungaard; Rauner, Felix

    1996-01-01

    Different approaches to understand the concept ofculture are presented and evaluated. The author'sconcept of culture is defined. Different aspectsof the concept are discussed.......Different approaches to understand the concept ofculture are presented and evaluated. The author'sconcept of culture is defined. Different aspectsof the concept are discussed....

  2. Damage correlation in theory and practice

    International Nuclear Information System (INIS)

    Doran, D.G.; Odette, G.R.; Simons, R.L.; Mansur, L.K.

    1977-01-01

    Common to all reactor development work is the problem of differences between the irradiation environments used for materials testing and those typical of service conditions. Efforts are being made to develop damage models that incorporate irradiation parameters such as type and energy of radiation, flux, and exposure. Models relating radiation damage production and microstructural evolution to changes in mechanical properties are primitive. Nevertheless, they suggest that the inability to account quantitatively for differences in test and service neutron spectra leads to overly conservative design of out-of-core components. Direct experimental corroboration is difficult because of the low neutron fluxes associated with the desired soft spectra. Further development of mechanistic models and new approaches to model testing are needed. Models of the growth stage of swelling, on the other hand, are relatively advanced. These models are discussed briefly as an example of how damage models can be used to help guide and analyze irradiation experiments. Accelerated damage studies using charged particles are expected to continue. Current empirical correlations of damage rates can be given a firmer theoretical basis as analysis of experiments and modeling of damage continue to improve. Damage correlation methodology practices in reactor design must necessarily follow different rules from that practiced in materials research and development. Nevertheless, decreasing the gap between them is a laudable objective with potentially significant economic impact

  3. A systematic approach to the radiation damage problem in reactor materials

    International Nuclear Information System (INIS)

    Bullough, R.; Eyre, B.L.; Kulcinski, G.L.

    1976-09-01

    To assess the suitability of a material for use as a core component in a fast reactor or for the first wall in a fusion reactor, it is necessary to know the irradiation damage behaviour of the material outside the usual materials testing data domain. In the present paper a strategy is proposed based on a closely co-ordinated programme of experimental and theoretical research. The aim of this strategy is the systematic construction of a physically based model of the evolving damage structures. This would then allow both the necessary extrapolations of the data to the desired conditions to be achieved in a reliable fashion and provide a rational basis for the development of low swelling alloys for the two nuclear systems. (author)

  4. Damage assessment in multilayered MEMS structures under thermal fatigue

    Science.gov (United States)

    Maligno, A. R.; Whalley, D. C.; Silberschmidt, V. V.

    2011-07-01

    This paper reports on the application of a Physics of Failure (PoF) methodology to assessing the reliability of a micro electro mechanical system (MEMS). Numerical simulations, based on the finite element method (FEM) using a sub-domain approach was used to examine the damage onset due to temperature variations (e.g. yielding of metals which may lead to thermal fatigue). In this work remeshing techniques were employed in order to develop a damage tolerance approach based on the assumption that initial flaws exist in the multi-layered.

  5. Thermal analysis on parchments I: DSC and TGA combined approach for heat damage assessment

    DEFF Research Database (Denmark)

    Fessas, D.; Signorelli, M.; Schiraldi, A.

    2006-01-01

    Ancient, new and artificially aged parchments were investigated with both differential scanning calorimetry (DSC) and thermogravimetry (TGA). Criteria to define a quantitative ranking of the damage experienced by the bulk collagen of historical parchments were assessed. A damage-related correlation...

  6. Uncertainty and Sensitivity of Direct Economic Flood Damages: the FloodRisk Free and Open-Source Software

    Science.gov (United States)

    Albano, R.; Sole, A.; Mancusi, L.; Cantisani, A.; Perrone, A.

    2017-12-01

    The considerable increase of flood damages in the the past decades has shifted in Europe the attention from protection against floods to managing flood risks. In this context, the expected damages assessment represents a crucial information within the overall flood risk management process. The present paper proposes an open source software, called FloodRisk, that is able to operatively support stakeholders in the decision making processes with a what-if approach by carrying out the rapid assessment of the flood consequences, in terms of direct economic damage and loss of human lives. The evaluation of the damage scenarios, trough the use of the GIS software proposed here, is essential for cost-benefit or multi-criteria analysis of risk mitigation alternatives. However, considering that quantitative assessment of flood damages scenarios is characterized by intrinsic uncertainty, a scheme has been developed to identify and quantify the role of the input parameters in the total uncertainty of flood loss model application in urban areas with mild terrain and complex topography. By the concept of parallel models, the contribution of different module and input parameters to the total uncertainty is quantified. The results of the present case study have exhibited a high epistemic uncertainty on the damage estimation module and, in particular, on the type and form of the utilized damage functions, which have been adapted and transferred from different geographic and socio-economic contexts because there aren't depth-damage functions that are specifically developed for Italy. Considering that uncertainty and sensitivity depend considerably on local characteristics, the epistemic uncertainty associated with the risk estimate is reduced by introducing additional information into the risk analysis. In the light of the obtained results, it is evident the need to produce and disseminate (open) data to develop micro-scale vulnerability curves. Moreover, the urgent need to push

  7. Time-Dependent Damage Investigation of Rock Mass in an In Situ Experimental Tunnel

    Science.gov (United States)

    Jiang, Quan; Cui, Jie; Chen, Jing

    2012-01-01

    In underground tunnels or caverns, time-dependent deformation or failure of rock mass, such as extending cracks, gradual rock falls, etc., are a costly irritant and a major safety concern if the time-dependent damage of surrounding rock is serious. To understand the damage evolution of rock mass in underground engineering, an in situ experimental testing was carried out in a large belowground tunnel with a scale of 28.5 m in width, 21 m in height and 352 m in length. The time-dependent damage of rock mass was detected in succession by an ultrasonic wave test after excavation. The testing results showed that the time-dependent damage of rock mass could last a long time, i.e., nearly 30 days. Regression analysis of damage factors defined by wave velocity, resulted in the time-dependent evolutional damage equation of rock mass, which corresponded with logarithmic format. A damage viscoelastic-plastic model was developed to describe the exposed time-dependent deterioration of rock mass by field test, such as convergence of time-dependent damage, deterioration of elastic modules and logarithmic format of damage factor. Furthermore, the remedial measures for damaged surrounding rock were discussed based on the measured results and the conception of damage compensation, which provides new clues for underground engineering design.

  8. Bayesian inference method for stochastic damage accumulation modeling

    International Nuclear Information System (INIS)

    Jiang, Xiaomo; Yuan, Yong; Liu, Xian

    2013-01-01

    Damage accumulation based reliability model plays an increasingly important role in successful realization of condition based maintenance for complicated engineering systems. This paper developed a Bayesian framework to establish stochastic damage accumulation model from historical inspection data, considering data uncertainty. Proportional hazards modeling technique is developed to model the nonlinear effect of multiple influencing factors on system reliability. Different from other hazard modeling techniques such as normal linear regression model, the approach does not require any distribution assumption for the hazard model, and can be applied for a wide variety of distribution models. A Bayesian network is created to represent the nonlinear proportional hazards models and to estimate model parameters by Bayesian inference with Markov Chain Monte Carlo simulation. Both qualitative and quantitative approaches are developed to assess the validity of the established damage accumulation model. Anderson–Darling goodness-of-fit test is employed to perform the normality test, and Box–Cox transformation approach is utilized to convert the non-normality data into normal distribution for hypothesis testing in quantitative model validation. The methodology is illustrated with the seepage data collected from real-world subway tunnels.

  9. Ion beam modification of solids ion-solid interaction and radiation damage

    CERN Document Server

    Wesch, Werner

    2016-01-01

    This book presents the method of ion beam modification of solids in realization, theory and applications in a comprehensive way. It provides a review of the physical basics of ion-solid interaction and on ion-beam induced structural modifications of solids. Ion beams are widely used to modify the physical properties of materials. A complete theory of ion stopping in matter and the calculation of the energy loss due to nuclear and electronic interactions are presented including the effect of ion channeling. To explain structural modifications due to high electronic excitations, different concepts are presented with special emphasis on the thermal spike model. Furthermore, general concepts of damage evolution as a function of ion mass, ion fluence, ion flux and temperature are described in detail and their limits and applicability are discussed. The effect of nuclear and electronic energy loss on structural modifications of solids such as damage formation, phase transitions and amorphization is reviewed for ins...

  10. A durability model incorporating safe life methodology and damage tolerance approach to assess first inspection and maintenance period for structures

    Energy Technology Data Exchange (ETDEWEB)

    Xiong, J.J. [Aircraft Department, Beihang University, Beijing 100083 (China); Shenoi, R.A. [School of Engineering Sciences, University of Southampton, Southampton SO17 1BJ (United Kingdom)], E-mail: r.a.shenoi@ship.soton.ac.uk

    2009-08-15

    This paper outlines a new durability model to assess the first inspection and maintenance period for structures. Practical scatter factor formulae are presented to determine the safe fatigue crack initiation and propagation lives from the results of a single full-scale test of a complete structure. New theoretical solutions are proposed to determine the s{sub a}-s{sub m}-N surfaces of fatigue crack initiation and propagation. Prediction techniques are then developed to establish the relationship equation between safe fatigue crack initiation and propagation lives with a specific reliability level using a two-stage fatigue damage cumulative rule. A new durability model incorporating safe life and damage tolerance design approaches is derived to assess the first inspection and maintenance period. Finally, the proposed models are applied to assess the first inspection and maintenance period of a fastening structure at the root of helicopter blade.

  11. Continuum theory of fibrous tissue damage mechanics using bond kinetics: application to cartilage tissue engineering.

    Science.gov (United States)

    Nims, Robert J; Durney, Krista M; Cigan, Alexander D; Dusséaux, Antoine; Hung, Clark T; Ateshian, Gerard A

    2016-02-06

    This study presents a damage mechanics framework that employs observable state variables to describe damage in isotropic or anisotropic fibrous tissues. In this mixture theory framework, damage is tracked by the mass fraction of bonds that have broken. Anisotropic damage is subsumed in the assumption that multiple bond species may coexist in a material, each having its own damage behaviour. This approach recovers the classical damage mechanics formulation for isotropic materials, but does not appeal to a tensorial damage measure for anisotropic materials. In contrast with the classical approach, the use of observable state variables for damage allows direct comparison of model predictions to experimental damage measures, such as biochemical assays or Raman spectroscopy. Investigations of damage in discrete fibre distributions demonstrate that the resilience to damage increases with the number of fibre bundles; idealizing fibrous tissues using continuous fibre distribution models precludes the modelling of damage. This damage framework was used to test and validate the hypothesis that growth of cartilage constructs can lead to damage of the synthesized collagen matrix due to excessive swelling caused by synthesized glycosaminoglycans. Therefore, alternative strategies must be implemented in tissue engineering studies to prevent collagen damage during the growth process.

  12. Application of the lines of protection concept to the HTGR-SC/C

    International Nuclear Information System (INIS)

    1981-09-01

    This study of the application of the line of protection (LOP) concept to high temperature gas-cooled reactors (HTGRs) was motivated by a desire to develop a simple and straightforward HTGR safety concept that embodies many of the more complicated and seemingly conflicting concepts facing nuclear industry safety today. These concepts include: (1) defense in depth; (2) design basis events; (3) core damage events (degraded cores); (4) probabilistic analysis and risk assessment; (5) numerical safety goals; and (6) plant investment protection. The LOP concept described herein attempts to incorporate many of the important principles of each into a cohesive framework which provides an overall logic, meaning, and direction for conducting HTGR design and research activities

  13. The materials concept in German light water reactors. A contribution to plant safety, economic performance and damage prevention

    International Nuclear Information System (INIS)

    Ilg, Ulf

    2008-01-01

    Major decisions taken as early as in the planning and construction phases of nuclear power plants may influence overall plant life. Component quality at the beginning of plant life is determined very much also by a balanced inclusion of the 'design, choice of materials, manufacturing and inspection' elements. One example of the holistic treatment of design, choice of material, and manufacture of important safety-related components in pressurized water reactors is the reactor pressure vessel (RPV) in which the ferritic compound tubes, with inside claddings, for the control rod drive nozzles are screwed into the vessel top. Also the choice of Incoloy 800 for the steam generator tubes, and the design of the main coolant pipes with inside claddings as seamless pipe bends / straight pipes with integrated nozzles connected to mixed welds with austenitic pipes are other special design features of the Siemens/KWU plants. A demonstrably high quality standard by international comparison to this day has been exhibited by the austenitic RPV internals of boiling water reactors, which were made of a low-carbon Nb-stabilized austenitic steel grade by optimum manufacturing technologies. The same material is used for backfitting austenitic pipes. Reliable and safe operation of German nuclear power plants has been demonstrated for more than 4 decades. One major element in this performance is the materials concept adopted in Germany also in the interest of damage prevention. (orig.)

  14. Impact of visual impairment on the lives of young adults in the Netherlands: a concept-mapping approach.

    Science.gov (United States)

    Elsman, Ellen Bernadette Maria; van Rens, Gerardus Hermanus Maria Bartholomeus; van Nispen, Ruth Marie Antoinette

    2017-12-01

    While the impact of visual impairments on specific aspects of young adults' lives is well recognised, a systematic understanding of its impact on all life aspects is lacking. This study aims to provide an overview of life aspects affected by visual impairment in young adults (aged 18-25 years) using a concept-mapping approach. Visually impaired young adults (n = 22) and rehabilitation professionals (n = 16) participated in online concept-mapping workshops (brainstorm procedure), to explore how having a visual impairment influences the lives of young adults. Statements were categorised based on similarity and importance. Using multidimensional scaling, concept maps were produced and interpreted. A total of 59 and 260 statements were generated by young adults and professionals, respectively, resulting in 99 individual statements after checking and deduplication. The combined concept map revealed 11 clusters: work, study, information and regulations, social skills, living independently, computer, social relationships, sport and activities, mobility, leisure time, and hobby. The concept maps provided useful insight into activities influenced by visual impairments in young adults, which can be used by rehabilitation centres to improve their services. This might help in goal setting, rehabilitation referral and successful transition to adult life, ultimately increasing participation and quality of life. Implications for rehabilitation Having a visual impairment affects various life-aspects related to participation, including activities related to work, study, social skills and relationships, activities of daily living, leisure time and mobility. Concept-mapping helped to identify the life aspects affected by low vision, and quantify these aspects in terms of importance according to young adults and low vision rehabilitation professionals. Low vision rehabilitation centres should focus on all life aspects found in this study when identifying the needs of young

  15. Promoting pre-conceptional use of folic acid to Hispanic women: a social marketing approach.

    Science.gov (United States)

    Quinn, Gwendolyn P; Hauser, Kimberlea; Bell-Ellison, Bethany A; Rodriguez, Nydia Y; Frías, Jaime L

    2006-09-01

    To develop a culturally appropriate communication initiative in an effort to promote the use of pre-conceptional folic acid among Hispanic women of childbearing age. The materials were designed to communicate information about the risks of neural tube defects and the value of folic acid supplementation before conception. The initiative was developed using a social marketing approach. A series of focus groups were conducted with Hispanic women, particularly Mexican and Mexican-American women, to gain an understanding of their knowledge, attitudes, and behaviors regarding birth defects and folic acid. Additionally focus groups assessed women's preferences for existing folic acid education materials. Qualitative analysis of coded transcripts revealed key themes which were incorporated into a multi-media initiative. Critical themes of the research highlighted the need to include the role of partners and a sense of family in the promotions aimed at these groups. Another key component was the need to dispel myths which act as barriers to pre-conceptional folic acid use. Other important elements included in the media products were the need for Spanish and English versions, an explanation of neural tube defects, and a reference to the cost of the supplements. The final products of the initiative included Spanish and English versions of a brochure, photo-novella, and radio public service announcement. Pre-testing results showed women understood the message, thought the message was for women like them, and expected to begin taking a folic acid supplement. Results of the overall evaluation of the initiative are on-going.

  16. Damage-resistant brittle coatings

    Energy Technology Data Exchange (ETDEWEB)

    Lawn, B.R.; Lee, K.S. [National Inst. of Stand. and Technol., Gaithersburg, MD (United States). Mater. Sci. and Eng. Lab.; Chai, H. [Tel Aviv Univ. (Israel). Faculty of Engineering; Pajares, A. [Universidad de Extremadura, Badajoz (Spain). Dept. de Fisica; Kim, D.K. [Korea Advanced Inst. of Science and Technolgy, Taejon (Korea). Dept. of Materials Science and Engineering; Wuttiphan, S. [National Metal and Materials Technology Center, Bangkok (Thailand); Peterson, I.M. [Corning Inc., NY (United States); Hu Xiaozhi [Western Australia Univ., Nedlands, WA (Australia). Dept. of Mechanical and Materials Engineering

    2000-11-01

    Laminate structures consisting of hard, brittle coatings and soft, tough substrates are important in a wide variety of engineering applications, biological structures, and traditional pottery. In this study the authors introduce a new approach to the design of damage-resistant brittle coatings, based on a combination of new and existing relations for crack initiation in well-defined contact-induced stress fields. (orig.)

  17. [Concepts of inhibition in psychiatry].

    Science.gov (United States)

    Auroux, Y; Bourrat, M M; Brun, J P

    1978-01-01

    Following a historical approach, the authors first describe the original development of the concept of inhibition in neurophysiology and then analyze the subsequent adaptations made in psychiatry around such concept including those of: -- Pavlov, Hull, Watson and the behaviorists, -- Freud and the Freudian School, -- clinicians and psychopharmacologists. The concept of inhibition has thus various meanings in psychiatry. Although some unity is achieved on the semiological level, this aspect cannot explain the extent of the process.

  18. Optimize scientific communication skills on work and energy concept with implementation of interactive conceptual instruction and multi representation approach

    Science.gov (United States)

    Patriot, E. A.; Suhandi, A.; Chandra, D. T.

    2018-05-01

    The ultimate goal of learning in the curriculum 2013 is that learning must improve and balance between soft skills and hard skills of learners. In addition to the knowledge aspect, one of the other skills to be trained in the learning process using a scientific approach is communication skills. This study aims to get an overview of the implementation of interactive conceptual instruction with multi representation to optimize the achievement of students’ scientific communication skills on work and energy concept. The scientific communication skills contains the sub-skills were searching the information, scientific writing, group discussion and knowledge presentation. This study was descriptive research with observation method. Subjects in this study were 35 students of class X in Senior High School at Sumedang. The results indicate an achievement of optimal scientific communication skills. The greatest achievement of KKI based on observation is at fourth meeting of KKI-3, which is a sub-skill of resume writing of 89%. Allmost students responded positively to the implication of interactive conceptual instruction with multi representation approach. It can be concluded that the implication of interactive conceptual instruction with multi representation approach can optimize the achievement of students’ scientific communication skill on work and energy concept.

  19. Multicriteria selection in concept design of a divertor remote maintenance port in the EU DEMO reactor using an AHP participative approach

    Energy Technology Data Exchange (ETDEWEB)

    Carfora, D. [Tampere University of Technology, Korkeakoulunkatu 6, 33720 Tampere (Finland); Gironimo, G. Di, E-mail: giuseppe.digironimo@unina.it [CREATE, University of Naples Federico II, P.le Tecchio 80, 80125 Napoli (Italy); Esposito, G. [CREATE, University of Naples Federico II, P.le Tecchio 80, 80125 Napoli (Italy); Huhtala, K. [Tampere University of Technology, Korkeakoulunkatu 6, 33720 Tampere (Finland); Määttä, T.; Mäkinen, H. [VTT Technical Research Centre of Finland, P.O. Box 1300, FI-33101 Tampere (Finland); Miccichè, G. [ENEA Brasimone, I:40032 Camugnano (Italy); Mozzillo, R. [CREATE, University of Naples Federico II, P.le Tecchio 80, 80125 Napoli (Italy)

    2016-11-15

    Highlights: • Concept Studies in Divertor Remote Handling. • Prioritization of concept alternatives. • Comparison and evaluation of product alternatives using AHP. - Abstract: The work behind this paper took place in the Eurofusion remote maintenance system project (WPRM) for the EU Demonstration Fusion Power Reactor (DEMO). Following ITER, the aim of DEMO is to demonstrate the capability of generating several hundreds of MW of net electricity by 2050. The main objective of this paper was the study of the most efficient design of the maintenance port for replacing the divertor cassettes in a Remote Handling (RH) point of view. In DEMO overall design, one important consideration is the availability and short down time operations. The inclination of the divertor port has a very important impact on all the RH tasks such as the design of the divertor mover, the divertor locking systems and the end effectors. The current reference scenario of the EU DEMO foresees a 45° inclined port for the remote maintenance (RM) of the divertor in the lower part of the reactor. Nevertheless, in the optic of the systems engineering (SE) approach, in early concept design phase, all possible configurations shall be taken into account. Even the solutions which seem not feasible at all need to be investigated, because they could lead to new and innovative engineering proposals. The different solutions were compared using an approach based on the Analytic Hierarchy Process (AHP). The technique is a multi-criteria decision making approach in which the factors that are important in making a decision are arranged in a hierarchic structure. The results of these studies show how the application of the AHP improved and focused the selection on the concept which is closer to the requirements arose from technical meetings with the experts of the RH field.

  20. Multicriteria selection in concept design of a divertor remote maintenance port in the EU DEMO reactor using an AHP participative approach

    International Nuclear Information System (INIS)

    Carfora, D.; Gironimo, G. Di; Esposito, G.; Huhtala, K.; Määttä, T.; Mäkinen, H.; Miccichè, G.; Mozzillo, R.

    2016-01-01

    Highlights: • Concept Studies in Divertor Remote Handling. • Prioritization of concept alternatives. • Comparison and evaluation of product alternatives using AHP. - Abstract: The work behind this paper took place in the Eurofusion remote maintenance system project (WPRM) for the EU Demonstration Fusion Power Reactor (DEMO). Following ITER, the aim of DEMO is to demonstrate the capability of generating several hundreds of MW of net electricity by 2050. The main objective of this paper was the study of the most efficient design of the maintenance port for replacing the divertor cassettes in a Remote Handling (RH) point of view. In DEMO overall design, one important consideration is the availability and short down time operations. The inclination of the divertor port has a very important impact on all the RH tasks such as the design of the divertor mover, the divertor locking systems and the end effectors. The current reference scenario of the EU DEMO foresees a 45° inclined port for the remote maintenance (RM) of the divertor in the lower part of the reactor. Nevertheless, in the optic of the systems engineering (SE) approach, in early concept design phase, all possible configurations shall be taken into account. Even the solutions which seem not feasible at all need to be investigated, because they could lead to new and innovative engineering proposals. The different solutions were compared using an approach based on the Analytic Hierarchy Process (AHP). The technique is a multi-criteria decision making approach in which the factors that are important in making a decision are arranged in a hierarchic structure. The results of these studies show how the application of the AHP improved and focused the selection on the concept which is closer to the requirements arose from technical meetings with the experts of the RH field.

  1. Alternative Conceptions of Wisdom: An Onion-Peeling Exercise.

    Science.gov (United States)

    Blanchard-Fields, Fredda; And Others

    1987-01-01

    Discusses contextualistic and integrative approaches to the concept of wisdom, and the evolution of the concept from an independent construct of intelligence to a component of intelligence, i.e., practical intelligence. Suggests operationalization of wisdom as the ability to integrate cognition and affect. Illustrates the integrative approach with…

  2. A neurocorrective approach for MMPI-2 use for brain-damaged patients

    NARCIS (Netherlands)

    Balen, H.G.G. van; Mey, H.R.A. De; Limbeek, J. van

    1999-01-01

    Conventional administration of the Minnesota Multiphasic Personality Inventory-2 (MMPI-2) to aetiologically distinct brain-damaged out-patients (n = 137) revealed significant indications of psychological maladjustment. An adjustment for the endorsement of aetiology-specific items pertaining to

  3. Applications of disorder-induced melting concept to critical-solute-accumulation processes

    International Nuclear Information System (INIS)

    Lam, N.Q.; Okamoto, P.R.; Heuer, J.K.

    2001-01-01

    A generalized version of the Lindemann melting criterion has recently been used to develop a unified thermodynamic description of disorder-induced amorphization and heat-induced melting. This concept of amorphization as a melting process is based on the fact that the melting temperature of a defective crystal driven far from equilibrium will decrease relative to that of its defect-free equilibrium state. The broader view of melting provides a new perspective of damage-accumulation processes such as radiation damage, ion implantation, ion beam mixing, plastic deformation, and fracture. For example, within this conceptual framework, disorder-induced amorphization is simply polymorphous melting of a critically disordered crystal at temperatures below the glass transition temperature. In the present communication, we discuss the application of the concept to two specific cases: amorphous phase formation during ion implantation and solute segregation-induced intergranular fracture

  4. Pre-1989 epidemiological surveys of low-level dose pre-conception irradiation

    International Nuclear Information System (INIS)

    Rose, K.S.B.

    1990-01-01

    Information from 59 pre-1989 epidemiological surveys concerning pre-conception irradiation at doses less than 0.1 Gy has been collated to determine whether any consistent patterns of health effects emerge. The surveys are considered in three groups: childhood malignancies, Down's syndrome and indicators of reproductive damage. Although a pattern is observed for Down's syndrome, no reliable associations are apparent for childhood malignancies (where all surveys pre-date the Gardner survey at Sellafield) or indications of reproductive damage. The twelve surveys of Down's syndrome in relation to maternal pre-conception irradiation received for medical reasons show a pattern consistent with a doubling dose of about 20 mGy. This doubling dose value is, however, not based on individual measurements of ovarian dose and is inconsistent with results from high-level dose surveys. There is no association between paternal irradiation and Down's syndrome. (author)

  5. Climate change loss and damage. Economic and legal foundations

    Energy Technology Data Exchange (ETDEWEB)

    Pinninti, Krishna Rao

    2014-04-01

    This text works to establish essential foundations and guidelines in the current process of providing strategies, mechanisms and resources for mitigating loss and damage from the adverse impacts of climate change and climate variability. This builds on the groundwork done by the UNFCCC and other entities to facilitate the processes at the international level, pursuing a pragmatic approach and the objective specification of relevant frameworks for further actions. The primary goal is the development of integrated approaches to the assessment and reduction of loss and damage due to climate change (including climate variability), encompassing both economic and legal dimensions.

  6. Climate change loss and damage. Economic and legal foundations

    International Nuclear Information System (INIS)

    Pinninti, Krishna Rao

    2014-01-01

    This text works to establish essential foundations and guidelines in the current process of providing strategies, mechanisms and resources for mitigating loss and damage from the adverse impacts of climate change and climate variability. This builds on the groundwork done by the UNFCCC and other entities to facilitate the processes at the international level, pursuing a pragmatic approach and the objective specification of relevant frameworks for further actions. The primary goal is the development of integrated approaches to the assessment and reduction of loss and damage due to climate change (including climate variability), encompassing both economic and legal dimensions.

  7. Collaborative and Multilingual Approach to Learn Database Topics Using Concept Maps

    Science.gov (United States)

    Calvo, Iñaki

    2014-01-01

    Authors report on a study using the concept mapping technique in computer engineering education for learning theoretical introductory database topics. In addition, the learning of multilingual technical terminology by means of the collaborative drawing of a concept map is also pursued in this experiment. The main characteristics of a study carried out in the database subject at the University of the Basque Country during the 2011/2012 course are described. This study contributes to the field of concept mapping as these kinds of cognitive tools have proved to be valid to support learning in computer engineering education. It contributes to the field of computer engineering education, providing a technique that can be incorporated with several educational purposes within the discipline. Results reveal the potential that a collaborative concept map editor offers to fulfil the above mentioned objectives. PMID:25538957

  8. A concept mapping approach to guide and understand dissemination and implementation.

    Science.gov (United States)

    Green, Amy E; Fettes, Danielle L; Aarons, Gregory A

    2012-10-01

    Many efforts to implement evidence-based programs do not reach their full potential or fail due to the variety of challenges inherent in dissemination and implementation. This article describes the use of concept mapping-a mixed method strategy-to study implementation of behavioral health innovations and evidence-based practice (EBP). The application of concept mapping to implementation research represents a practical and concise way to identify and quantify factors affecting implementation, develop conceptual models of implementation, target areas to address as part of implementation readiness and active implementation, and foster communication among stakeholders. Concept mapping is described and a case example is provided to illustrate its use in an implementation study. Implications for the use of concept mapping methods in both research and applied settings towards the dissemination and implementation of behavioral health services are discussed.

  9. Radiation damage in molybdenum and tungsten in high neutron fluxes

    International Nuclear Information System (INIS)

    Veljkovic, S.; Milasin, N.

    1964-01-01

    The effects of radiation on molybdenum and tungsten in high neutron fluxes are presented. The changes induced, particularly defects with a high migration activation energy, are analyzed. The correlation of these changes with the basic concepts of radiation damage in solids is considered. An attempt is made to relate the defects studied with the changes in macroscopic properties (author)

  10. Radiation damage in molybdenum and tungsten in high neutron fluxes

    Energy Technology Data Exchange (ETDEWEB)

    Veljkovic, S; Milasin, N [Institute of Nuclear Sciences Boris Kidric, Department of Reactor Materials, Vinca, Beograd (Serbia and Montenegro)

    1964-04-15

    The effects of radiation on molybdenum and tungsten in high neutron fluxes are presented. The changes induced, particularly defects with a high migration activation energy, are analyzed. The correlation of these changes with the basic concepts of radiation damage in solids is considered. An attempt is made to relate the defects studied with the changes in macroscopic properties (author)

  11. Role of connected mobility concept for twenty-first-century cities—Trial approach for conceptualization of connected mobility through case studies

    Directory of Open Access Journals (Sweden)

    Fumihiko Nakamura

    2014-07-01

    The author defined the idea of “mobility design” in the scope of urban transportation and explored the concept of connected mobility through case studies that the author has been involved in or researched. Although many important connections in and approaches to urban transportation have come to light, the process of actually working on such projects has uncovered many issues to address such as sharing and social capital. The ability to design mobility as a connected entity and pursue our research topics from that perspective will be vital to overcoming the issues highlighted above and helping the concept of connected mobility flourish.

  12. Assessment of damage from reduction of expected lifespan due to cancer

    Directory of Open Access Journals (Sweden)

    Boris Alengordovich Korobitsyn

    2013-09-01

    Full Text Available This paper presents the theoretical and methodological approaches to the assessment of damage from premature mortality and reduction of life expectancy due to various reasons. The concepts measuring the price of a human life are analyzed: the evaluation from the standpoint of the theory of human capital; indirect estimation taking into account non-monetary social costs; evaluation of individuals’ willingness to pay for the elimination of the risk of death; estimation based on the determination of insurance premiums and compensations under court decision; evaluation of the social investments, aimed to reduce the risk of premature mortality of the individual. The following indexes were calculated for all subordinate entities of the Russian Federation: reduction of life expectancy, lost years of potential life in the working age, and gross regional product lost due to the reduction of years of potential life in the working-age population as a result of cancer

  13. Evaluation of the basic concepts of approaches for the coexistence of nuclear energy and people/local community

    International Nuclear Information System (INIS)

    Kondo, Shunsuke; Kuroki, Shinichi; Nakagiri, Yuko

    2007-01-01

    In November 2007, the Policy Evaluation Committee compiled the report, which evaluated the basic concepts of approaches to the coexistence of nuclear energy and people/local community, specified in the Framework for Nuclear Energy Policy. The report states that the 'concerned administrative bodies are carrying out measures related to the coexistence of nuclear energy and people/local communities in line with these basic concept' and summarizes fifteen proposals conductive to the betterment and improvement of these measures, which were classified as 1) secure transparency and promotion of mutual understanding with the public, 2) development and enrichment of learning opportunities and public participation, 3) relationship between the government and local governments and 4) coexistence with local residents. The Japan Atomic Energy Commission (JAEC) considers this report to be reasonable. This article presented an overview of this activity. (T. Tanaka)

  14. The Power of Visual Approaches in Qualitative Inquiry: The Use of Collage Making and Concept Mapping in Experiential Research

    Directory of Open Access Journals (Sweden)

    Lynn Butler-Kisber

    2010-01-01

    Full Text Available The burgeoning interest in arts-informed research and the increasing variety of visual possibilities as a result of new technologies have paved the way for researchers to explore and use visual forms of inquiry. This article investigates how collage making and concept mapping are useful visual approaches that can inform qualitative research. They are experiential ways of doing/knowing that help to get at tacit aspects of both understanding and process and to make these more explicit to the researcher and more accessible to audiences. It outlines specific ways that each approach can be used with examples to illustrate how the approach informs the researcher's experience and that of the audience. The two approaches are compared and contrasted and issues that can arise in the work are discussed.

  15. A machine-learning approach for damage detection in aircraft structures using self-powered sensor data

    Science.gov (United States)

    Salehi, Hadi; Das, Saptarshi; Chakrabartty, Shantanu; Biswas, Subir; Burgueño, Rigoberto

    2017-04-01

    This study proposes a novel strategy for damage identification in aircraft structures. The strategy was evaluated based on the simulation of the binary data generated from self-powered wireless sensors employing a pulse switching architecture. The energy-aware pulse switching communication protocol uses single pulses instead of multi-bit packets for information delivery resulting in discrete binary data. A system employing this energy-efficient technology requires dealing with time-delayed binary data due to the management of power budgets for sensing and communication. This paper presents an intelligent machine-learning framework based on combination of the low-rank matrix decomposition and pattern recognition (PR) methods. Further, data fusion is employed as part of the machine-learning framework to take into account the effect of data time delay on its interpretation. Simulated time-delayed binary data from self-powered sensors was used to determine damage indicator variables. Performance and accuracy of the damage detection strategy was examined and tested for the case of an aircraft horizontal stabilizer. Damage states were simulated on a finite element model by reducing stiffness in a region of the stabilizer's skin. The proposed strategy shows satisfactory performance to identify the presence and location of the damage, even with noisy and incomplete data. It is concluded that PR is a promising machine-learning algorithm for damage detection for time-delayed binary data from novel self-powered wireless sensors.

  16. From Concepts to Predicates within Constructivist Epistemology

    DEFF Research Database (Denmark)

    Badie, Farshad

    2017-01-01

    Constructivism is a philosophical approach that appears in a variety of guises, some of them pedagogical, some epistemological and some in complex combinations. This article is based on constructivist epistemology. More specifically, constructivist epistemology provides a ground for conceptual an...... analysis of humans’ concept constructions, conceptions and concept learning processes. It will focus on conceptual specification and logical description of a flow from concepts to predicates....

  17. Customer Experience Marketing : Concepts and Tools

    OpenAIRE

    Kalaoja, Petteri

    2015-01-01

    This work studies what Customer Experience Management (CEM) is and how it can be implemented in modern marketing with an emphasis on B2C. This work takes a look into the concepts which are needed to achieve a versatile CEM approach. The tools and technologies that are needed to operate the CEM concept are also evaluated. This thesis explains that a Customer Experience Management strategy consists of a certain combination of concepts. These concepts usually include customer data, data-driv...

  18. Micro-mechanics based damage mechanics for 3D Orthogonal Woven Composites: Experiment and Numerical Modelling

    KAUST Repository

    Saleh, Mohamed Nasr; Lubineau, Gilles; Potluri, Prasad; Withers, Philip; Soutis, Constantinos

    2016-01-01

    Damage initiation and evolution of three-dimensional (3D) orthogonal woven carbon fibre composite (3DOWC) is investigated experimentally and numerically. Meso-scale homogenisation of the representative volume element (RVE) is utilised to predict the elastic properties, simulate damage initiation and evolution when loaded in tension. The effect of intra-yarns transverse cracking and shear diffused damage on the in-plane transverse modulus and shear modulus is investigated while one failure criterion is introduced to simulate the matrix damage. The proposed model is based on two major assumptions. First, the effect of the binder yarns, on the in-plane properties, is neglected, so the 3DOWC unit cell can be approximated as a (0o/90o) cross-ply laminate. Second, a micro-mechanics based damage approach is used at the meso-scale, so damage indicators can be correlated, explicitly, to the density of cracks within the material. Results from the simulated RVE are validated against experimental results along the warp (0o direction) and weft (90o direction). This approach paves the road for more predictive models as damage evolution laws are obtained from micro mechanical considerations and rely on few well-defined material parameters. This largely differs from classical damage mechanics approaches in which the evolution law is obtained by retrofitting experimental observations.

  19. Micro-mechanics based damage mechanics for 3D Orthogonal Woven Composites: Experiment and Numerical Modelling

    KAUST Repository

    Saleh, Mohamed Nasr

    2016-01-08

    Damage initiation and evolution of three-dimensional (3D) orthogonal woven carbon fibre composite (3DOWC) is investigated experimentally and numerically. Meso-scale homogenisation of the representative volume element (RVE) is utilised to predict the elastic properties, simulate damage initiation and evolution when loaded in tension. The effect of intra-yarns transverse cracking and shear diffused damage on the in-plane transverse modulus and shear modulus is investigated while one failure criterion is introduced to simulate the matrix damage. The proposed model is based on two major assumptions. First, the effect of the binder yarns, on the in-plane properties, is neglected, so the 3DOWC unit cell can be approximated as a (0o/90o) cross-ply laminate. Second, a micro-mechanics based damage approach is used at the meso-scale, so damage indicators can be correlated, explicitly, to the density of cracks within the material. Results from the simulated RVE are validated against experimental results along the warp (0o direction) and weft (90o direction). This approach paves the road for more predictive models as damage evolution laws are obtained from micro mechanical considerations and rely on few well-defined material parameters. This largely differs from classical damage mechanics approaches in which the evolution law is obtained by retrofitting experimental observations.

  20. NOx emissions from large point sources: variability in ozone production, resulting health damages and economic costs

    International Nuclear Information System (INIS)

    Mauzerall, D.L.; Namsoug Kim

    2005-01-01

    We present a proof-of-concept analysis of the measurement of the health damage of ozone (O 3 ) produced from nitrogen oxides (NO x =NO+NO 2 ) emitted by individual large point sources in the eastern United States. We use a regional atmospheric model of the eastern United States, the Comprehensive Air quality Model with Extensions (CAMx), to quantify the variable impact that a fixed quantity of NO x emitted from individual sources can have on the downwind concentration of surface O 3 , depending on temperature and local biogenic hydrocarbon emissions. We also examine the dependence of resulting O 3 -related health damages on the size of the exposed population. The investigation is relevant to the increasingly widely used 'cap and trade' approach to NO x regulation, which presumes that shifts of emission over time and space, holding the total fixed over the course of the summer O 3 season, will have minimal effect on the environmental outcome. By contrast, we show that a shift of a unit of NO x emissions from one place or time to another could result in large changes in resulting health effects due to O 3 formation and exposure. We indicate how the type of modeling carried out here might be used to attach externality-correcting prices to emissions. Charging emitters fees that are commensurate with the damage caused by their NO x emissions would create an incentive for emitters to reduce emissions at times and in locations where they cause the largest damage. (author)

  1. Covariance of dynamic strain responses for structural damage detection

    Science.gov (United States)

    Li, X. Y.; Wang, L. X.; Law, S. S.; Nie, Z. H.

    2017-10-01

    A new approach to address the practical problems with condition evaluation/damage detection of structures is proposed based on the distinct features of a new damage index. The covariance of strain response function (CoS) is a function of modal parameters of the structure. A local stiffness reduction in structure would cause monotonous increase in the CoS. Its sensitivity matrix with respect to local damages of structure is negative and narrow-banded. The damage extent can be estimated with an approximation to the sensitivity matrix to decouple the identification equations. The CoS sensitivity can be calibrated in practice from two previous states of measurements to estimate approximately the damage extent of a structure. A seven-storey plane frame structure is numerically studied to illustrate the features of the CoS index and the proposed method. A steel circular arch in the laboratory is tested. Natural frequencies changed due to damage in the arch and the damage occurrence can be judged. However, the proposed CoS method can identify not only damage happening but also location, even damage extent without need of an analytical model. It is promising for structural condition evaluation of selected components.

  2. Concept of contracting authority

    OpenAIRE

    Kasiliauskaitė, Vitalija

    2016-01-01

    Concept of Contracting Authority Law on Public Procurement the procurement concept implies the conclusion that public procurement be declared only such purchases are carried out by the contracting authority. The contracting authorities can be a subject of state and municipal management institutes, whose assignment authority is determined by a functional approach. Also, contracting authorities may be public and legal entities, but that the public interest and operates non-commercial activities...

  3. THE PHYSICAL LABORATORY ACTIVITIES WITH PROBLEM SOLVING APPROACH TO INCREASE CRITICAL THINKING SKILL AND UNDERSTANDING STUDENT CONCEPT

    Directory of Open Access Journals (Sweden)

    Eli Trisnowati

    2017-10-01

    Full Text Available This study aims to investigate the description of the improvement of students’ critical thinking skills and the concept understanding by implementing the problem-solving approach. This study was in laboratory activities. This study was done in four times meeting. The try out subjects was 31 students of grades X of MAN Yogyakarta III. This research is using the quasi experimental method with the pretest-posttest design. The data were collected by using multiple choices tests with assessment rubric and observation sheets. The data are analyzed by using multivariate analysis. Based on the result, the gain standard value of students’ conceptual understanding and students’ critical thinking skills for grade X who learned through student’s worksheet with a problem-solving approach, called treatment class, are higher than students who learned without student’s worksheet with a problem-solving approach, called control class.

  4. High School Students' Approaches to Learning Physics with Relationship to Epistemic Views on Physics and Conceptions of Learning Physics

    Science.gov (United States)

    Chiou, Guo-Li; Lee, Min-Hsien; Tsai, Chin-Chung

    2013-01-01

    Background and purpose: Knowing how students learn physics is a central goal of physics education. The major purpose of this study is to examine the strength of the predictive power of students' epistemic views and conceptions of learning in terms of their approaches to learning in physics. Sample, design and method: A total of 279 Taiwanese high…

  5. Disaster Concept at Different Educational Grades

    OpenAIRE

    Dikmenli, Yurdal; Gafa, İbrahim

    2017-01-01

    Disasters cover allthe events that damage both humans and their living environment. The disasters whichstem from nature are called natural disasters while those which stem from humankind,are called human disasters. Since humans constantly encounter such events at differenttimes, places and in different forms, it is inevitable that they will be affectedby them. Thus, one wonders what people understand the concept of disaster tobe. The aim of this study is to identify the students from all the ...

  6. An analysis of the development of high temperature cavitation damage

    International Nuclear Information System (INIS)

    Tinivella, R.

    1986-07-01

    The objective of the paper is the investigation of creep cavitation damage in copper. Radii distribution curves obtained from small angle neutron scattering experiments conducted on crept specimens were analyzed and compared with calculated curves. The latter were derived from cavity nucleation- and growth models. From the comparison the appropriateness of particular models can be infered. Valuable information is obtained about the nucleation behaviour. In crept and fatigued specimens, already after very short loading times, cavities appear with remarkable different radii, an observation which is contradictory to the concept of a critical radius. The analysis of the nucleation behavior emphasizes the influence of the stress dependence of the nucleation rate upon the stress dependence of damage and hence upon the stress dependence of the lifetime. In most of damage theories the latter is attributed to the stress dependency of cavity growth. A strong argument is derived in this paper in favour of the idea that both the mechanisms - growth and nucleation - contribute to the stress dependence of the lifetime. The damage development in Cu (as well as in alpha-Fe, AISI 304 and AISI 347) is compared with the prediction of the phenomenological A-model which assumes that the damage rate is proportional to the damage itself. The experiments show, that the damage increases in time slower (Cu, alpha-Fe, AISI 304) or faster (AISI 347) than predicted by the model. In copper the damage rate turns out to be constant independent of time. Accordingly the A-model is modified and the respective consequences are briefly discussed. (orig./GSCH) [de

  7. An Introduction to Statistical Concepts

    CERN Document Server

    Lomax, Richard G

    2012-01-01

    This comprehensive, flexible text is used in both one- and two-semester courses to review introductory through intermediate statistics. Instructors select the topics that are most appropriate for their course. Its conceptual approach helps students more easily understand the concepts and interpret SPSS and research results. Key concepts are simply stated and occasionally reintroduced and related to one another for reinforcement. Numerous examples demonstrate their relevance. This edition features more explanation to increase understanding of the concepts. Only crucial equations are included. I

  8. Translational research: a concept analysis.

    Science.gov (United States)

    Wendler, M Cecilia; Kirkbride, Geri; Wade, Kristen; Ferrell, Lynne

    2013-01-01

    BACKGROUND/CONCEPTUAL FRAMEWORK: Little is known about which approaches facilitate adoption and sustainment of evidence-based practice change in the highly complex care environments that constitute clinical practice today. The purpose of this article was to complete a concept analysis of translational research using a modified Walker and Avant approach. DESIGN/DATA COLLECTION: Using a rigorous and thorough review of the recent health care literature generated by a deep electronic search from 2004-2011, 85 appropriate documents were retrieved. Close reading of the articles by three coresearchers yielded an analysis of the emerging concept of translational research. Using the iterative process described by Walker and Avant, a tentative definition of the concept of translational research, along with antecedents and consequences were identified. Implications for health care professionals in education, practice, and research are offered. Further research is needed to determine the adequacy of the definition, to identify empirical referents, and to guide theory development. The study resulted in a theoretical definition of the concept of translational research, along with identification of antecedents and consequences and a description of an ideal or model case to illustrate the definition. Implications for practice and education include the importance of focusing on translational research approaches that may reduce the research-practice gap in health care, thereby improving patient care delivery. Research is needed to determine the usefulness of the definition in health care clinical practice.

  9. Damages as a Form of Responsibility of the Contract Parties for Breach of Contract

    Directory of Open Access Journals (Sweden)

    Natalia A. Temnikova

    2016-07-01

    Full Text Available The reform of the Civil code of the Russian Federation has significantly changed the provisions governing the obligations also through review of the main approaches to the compensation of damages. In Russia the applicability of such a sanction as compensation for damages has been unreasonably narrowed for a long time. This paper analyzes the general approaches and principles of the updated legislation and judicial practice concerning the proof and compensation of damages in civil and arbitration proceedings.

  10. Damage Identification for Prestressed Adjacent Box-Beam Bridges

    Directory of Open Access Journals (Sweden)

    Kenneth K. Walsh

    2014-01-01

    Full Text Available Structural health monitoring (SHM has gained considerable attention as a tool for monitoring the health of civil infrastructure. For bridge infrastructure, previous methods have focused on the detection of localized damage through modal parameters extracted from the longitudinal direction of the structure. This paper investigates a new damage detection method based on the change in the first vertical mode extracted from the transverse direction of the bridge. The mode is determined through application of modal curve fitting to frequency response functions (FRFs that are formed using vertical response data obtained in the direction perpendicular to the bridge’s longitudinal axis. Using this method, both local damage and global damage in the bridge reveal themselves as having a localized effect on the bridge response. Furthermore, damage is revealed in such a way that it enables differentiation of the damage types. To demonstrate the effectiveness of the method, modal parameters were extracted from acceleration data obtained from a finite element model of a full bridge. Analysis of the modal parameters showed that the proposed approach could not only detect both local and global bridge damage, but could also differentiate between damage types using only one mode shape. The proposed method was compared to a previously developed SHM method.

  11. Place, geography and the concept of diaspora : a methodological approach

    OpenAIRE

    Hidle, Knut

    2001-01-01

    This paper is an investigation, in a methodological sense, of the relevance of place in the context of international migration. It offers a critical discussion of the concept of diaspora, especially in relation to place. It furthermore argues against the use of homogenised and pre-fixed concepts such as disembedding as bases for empirical research about place in the context of international migration. The theoretical part of the paper begins with what has been called the “cultural...

  12. AREVA NP decontamination concept for decommissioning. A comprehensive approach based on over 30 years experience

    International Nuclear Information System (INIS)

    Stiepani, Christoph

    2011-01-01

    Decontamination prior to Decommissioning and Dismantlement is imperative. Not only does it provide for minimization of personnel dose exposure but also maximization of the material volume available for free release. Since easier dismantling techniques in lower dose areas can be applied, the licensing process is facilitated and the scheduling and budgeting effort is more reliable. The most internationally accepted approach for Decontamination prior to Decommissioning projects is the Full System Decontamination (FSD). FSD is defined as the chemical decontamination of the primary cooling circuit, in conjunction with the main auxiliary systems. AREVA NP has long-term experience with Full System Decontamination for return to service of operating nuclear power plants as well as for decommissioning after shutdown. Since 1976, AREVA NP has performed over 500 decontamination applications and, from 1986, Decontaminations prior to Decommissioning projects which comprise virtually all NPP designs and plant conditions were performed: NPP designs: HPWR, PWR, and BWR by AREVA, Westinghouse, ABB and GE. Decontaminations performed shortly after final shutdown or several years later, and even after re-opening Safe Enclosure. High Alpha inventory and or low gamma/alpha ratio. Main Coolant chemistry (e.g., with and without Zn injection during operation). Fifteen Decontaminations prior to Decommissioning Projects have been performed successfully to date and the sixteenth FSD is now in the detailed engineering phase and is scheduled to commence late 2010. AREVA NP has developed a fully comprehensive approach for decontamination based on the CORD® (Chemical Oxidation Reduction Decontamination) Family, applied using the in-house designed decontamination equipment AMDA TM (Automatic Modular Decontamination Appliance). Based on the vast experience of AREVA NP in the field of decontamination, the Decontamination Concept for Decommissioning was developed. This concept ensures that the

  13. Development of bifurcated solutions and study of their stability in damage problems

    International Nuclear Information System (INIS)

    Beaurain, J.

    2011-01-01

    This work is concerned with the development and the implementation of a numerical optimization algorithm in an industrial software for studying the stability of non local gradient damage numerical solutions given by finite elements method. Stability is a fundamental concept, that takes into account the existence of multiple solutions which could emerge due to the softening constitutive laws generally used to represent the irreversible damage of materials like concrete. Among all those solutions, only stable ones, invariant by little perturbations, could be physically observed. The difficulty is to satisfy the irreversible constraint of damage which drives to define a stability criterion by the positivity of the second derivative of the total energy in the direction of increasing damage. It numerically leads to ensure the positivity of the minimum of a quadratic form, using the second derivative matrix and subjected to inequalities constraints. In conclusion, the aim of this work is to implement an efficient and robust numerical constraints minimization algorithm in Code-Aster, adapted to different damage modelling, and to improve it using test cases found in the literature. (author)

  14. Study of the laser-induced damage of reflective components in the sub-picosecond regime

    International Nuclear Information System (INIS)

    Sozet, Martin

    2016-01-01

    In this thesis, laser-induced damage phenomenon of reflective components is investigated in the sub-picosecond regime. These components, made of stacks of dielectric materials, are widely used in powerful laser facilities such as PETAL laser. PETAL laser has been built at the CEA-CESTA in France to deliver multi-kJ/500 fs pulses at 1053 nm and reach a power higher than 6 PW. For this kind of laser systems, reflective components are commonly used instead of optics operating in transmission to limit the accumulation of non-linear phase along the beam propagation due to the high intensities. Optical components irradiated by the highest power densities are the pulse compression gratings, transport mirrors and the focusing parabola, located at the end of the laser chain. Nowadays, laser-induced damage is the main factor that limits the overall performances of powerful laser systems. This manuscript presents three study axes to better understand and control damage phenomenon. The first one concerns the conception of reflective optics for the peta-watt applications. The design of new structures has been investigated to reach high diffraction efficiencies in the case of pulse compression gratings and a high reflectivity in the case of mirrors, while reducing the Electric-field enhancement which is one of the causes of the laser-induced damage. The second axis deals with the development of a precise damage metrology with new testing tools which brings new perspectives and a new viewpoint for the assessment of the laser resistance of optical components. Finally, the third axis concerns the study the damage growth after several irradiations in the sub-picosecond regime. The evolution of the damage area during growth sequences is observed and compared to numerical simulations. It enables to improve the understanding in the growth phenomenon. In the end, these studies will allow to develop predictive models of the laser-induced damage and new tools for the conception of

  15. Development of CANDU prototype fuel handling simulator - concept and some simulation results with physical network modeling approach

    Energy Technology Data Exchange (ETDEWEB)

    Xu, X.P. [Candu Energy Inc, Mississauga, Ontario (Canada)

    2012-07-01

    This paper reviewed the need for a fuel handling(FH) simulator in training operators and maintenance personnel, in FH design enhancement based on operating experience (OPEX), and the potential application of Virtual Reality (VR) based simulation technology. Modeling and simulation of the fuelling machine (FM) magazine drive plant (one of the CANDU FH sub-systems) was described. The work established the feasibility of modeling and simulating a physical FH drive system using the physical network approach and computer software tools. The concept and approach can be applied similarly to create the other FH subsystem plant models, which are expected to be integrated with control modules to develop a master FH control model and further to create a virtual FH system. (author)

  16. Development of CANDU prototype fuel handling simulator - concept and some simulation results with physical network modeling approach

    International Nuclear Information System (INIS)

    Xu, X.P.

    2012-01-01

    This paper reviewed the need for a fuel handling(FH) simulator in training operators and maintenance personnel, in FH design enhancement based on operating experience (OPEX), and the potential application of Virtual Reality (VR) based simulation technology. Modeling and simulation of the fuelling machine (FM) magazine drive plant (one of the CANDU FH sub-systems) was described. The work established the feasibility of modeling and simulating a physical FH drive system using the physical network approach and computer software tools. The concept and approach can be applied similarly to create the other FH subsystem plant models, which are expected to be integrated with control modules to develop a master FH control model and further to create a virtual FH system. (author)

  17. Concept-Based Curricula: A National Study of Critical Concepts.

    Science.gov (United States)

    Brussow, Jennifer A; Roberts, Karin; Scaruto, Matthew; Sommer, Sheryl; Mills, Christine

    2018-02-22

    As nursing education struggles to address a rapidly changing health care system, overcrowded curricula, and an increased focus on clinical reasoning skills, many programs have adopted or transitioned to concept-based curricula (CBCs), which are structured around key concepts and exemplars. Despite CBC's promised benefits, the process of developing a CBC framework may pose a challenge to programs. To address this barrier, a national study was conducted to develop a representative list of concepts and exemplars. This initiative expands on prior work by suggesting a leveled approach to positioning exemplars within a curricular sequence.This is an open-access article distributed under the terms of the Creative Commons Attribution-Non Commercial-No Derivatives License 4.0 (CCBY-NC-ND), where it is permissible to download and share the work provided it is properly cited. The work cannot be changed in any way or used commercially without permission from the journal.

  18. Motivation: Approaching an Elusive Concept through the Factors That Shape It

    Science.gov (United States)

    Jang, Bong Gee; Conradi, Kristin; McKenna, Michael C.; Jones, Jill S.

    2015-01-01

    The main purpose of this article is to provide educators with clear definitions of motivational factors in reading so that instructional planning can capitalize on important distinctions. The authors present definitions of a small set of related motivational concepts (including attitudes, interests, self-efficacy, self-concept, goals, and value)…

  19. Flexibility-based damage detection for in-service highway bridge

    Science.gov (United States)

    Dahal, Sushil; Jang, Shinae; Mensah-Bonsu, Priscilla

    2012-04-01

    Highway bridges are the backbones of a country's road network infrastructure. In order to efficiently maintain these important structures, structural health monitoring (SHM) can be implemented to impart a more deterministic management procedure. To date, many damage detection strategies have been developed and implemented on lab-scale or simple bridge structures however, damage detection research has rarely been conducted taking full scale in-service structures into account with ambient vibration. Among the different approaches modal flexibility method is one of the sensitive tools for damage detection which has been widely used over the last two decades. This paper presents a damage detection based on the stochastic damage locating vector (SDLV) method for an in-service highway bridge using ambient vibration data from long-term SHM. The target bridge was equipped with a long-term SHM system as a part of a research project of the University of Connecticut. The ambient vibration data during 2001 and 2005 are used to identify the damage on the highway bridge. Finally, the potential damage locations are determined using the SDLV method with the limited number of sensors.

  20. Profile of Students’ Mental Model Change on Law Concepts Archimedes as Impact of Multi-Representation Approach

    Science.gov (United States)

    Taher, M.; Hamidah, I.; Suwarma, I. R.

    2017-09-01

    This paper outlined the results of an experimental study on the effects of multi-representation approach in learning Archimedes Law on students’ mental model improvement. The multi-representation techniques implemented in the study were verbal, pictorial, mathematical, and graphical representations. Students’ mental model was classified into three levels, i.e. scientific, synthetic, and initial levels, based on the students’ level of understanding. The present study employed the pre-experimental methodology, using one group pretest-posttest design. The subject of the study was 32 eleventh grade students in a Public Senior High School in Riau Province. The research instrument included model mental test on hydrostatic pressure concept, in the form of essay test judged by experts. The findings showed that there was positive change in students’ mental model, indicating that multi-representation approach was effective to improve students’ mental model.

  1. Fatigue testing of wood composites for aerogenerator blades. Pt. 11: Assessment of fatigue damage accumulation using a fatigue modulus approach

    Energy Technology Data Exchange (ETDEWEB)

    Hacker, C L; Ansell, M P [Bath Univ. (United Kingdom)

    1996-12-31

    Stress-strain hysteresis loops have been captured during fatigue tests performed at R=10 (compression-compression) and R=0.1 (tension-tension) on Khaya epoxy wood composites. A fatigue modulus approach, proposed by Hwang and Han in 1989, has been applied to the data and a relationship established between the initial change in fatigue modulus and fatigue life. By following changes in fatigue modulus during the first 100 test cycles it is possible to predict the life of the sample allowing rapid evaluation of the fatigue performance of wood composites. Fatigue modulus values have also been calculated for hysteresis loops captured during complex load - time history tests. Similar trends in change in fatigue modulus suggest that this approach could be used in complex loading conditions to evaluate fatigue damage accumulation and predict fatigue life. (Author)

  2. Investigation of virtual reality concept based on system analysis of conceptual series

    Science.gov (United States)

    Romanova, A.; Shuklin, D. A.; Kalinkina, M. E.; Gotskaya, I. B.; Ponomarev, Y. E.

    2018-05-01

    The paper covers approaches to the definition of virtual reality from the point of view of the humanitarian sciences and technology. Each approach analyzing problems of concept perception of methods interpreted by representatives of philosophy, psychology and sociology is singled out. Terminological analysis of the basic concepts is carried out and their refinement is constructed in the process of comparing the concepts of virtuality and virtual reality. Using the analysis of selected sources, a number of singularity characteristics of the given concept are singled out and its definition is specified. Results consist in combining the interpretation of all approaches to determine the concept of virtual reality. Due to the use of a comprehensive approach to the definition of the investigated concept, which allows us to consider the object of research as a set of elements that are subject to study with the help of a corresponding set of methods, one can conclude that the concept under study is complex and multifaceted. The authors noted that virtual reality technologies have a flexible concept depending on the field of application.

  3. Assessment of Seismic Damage on The Exist Buildings Using Fuzzy Logic

    Science.gov (United States)

    Pınar, USTA; Nihat, MOROVA; EVCİ, Ahmet; ERGÜN, Serap

    2018-01-01

    Earthquake as a natural disaster could damage the lives of many people and buildings all over the world. These is micvulnerability of the buildings needs to be evaluated. Accurate evaluation of damage sustained by buildings during natural disaster events is critical to determine the buildings safety and their suitability for future occupancy. The earthquake is one of the disasters that structures face the most. There fore, there is a need to evaluate seismic damage and vulnerability of the buildings to protect them. These days fuzzy systems have been widely used in different fields of science because of its simpli city and efficiency. Fuzzy logic provides a suitable framework for reasoning, deduction, and decision making in fuzzy conditions. In this paper, studies on earthquake hazard evaluation of buildings by fuzzy logic modeling concepts in the literature have been investigated and evaluated, as a whole.

  4. A Review of the Mechanism of Injury and Treatment Approaches for Illness Resulting from Exposure to Water-Damaged Buildings, Mold, and Mycotoxins

    Directory of Open Access Journals (Sweden)

    Janette Hope

    2013-01-01

    Full Text Available Physicians are increasingly being asked to diagnose and treat people made ill by exposure to water-damaged environments, mold, and mycotoxins. In addition to avoidance of further exposure to these environments and to items contaminated by these environments, a number of approaches have been used to help persons affected by exposure to restore their health. Illness results from a combination of factors present in water-damaged indoor environments including, mold spores and hyphal fragments, mycotoxins, bacteria, bacterial endotoxins, and cell wall components as well as other factors. Mechanisms of illness include inflammation, oxidative stress, toxicity, infection, allergy, and irritant effects of exposure. This paper reviews the scientific literature as it relates to commonly used treatments such as glutathione, antioxidants, antifungals, and sequestering agents such as Cholestyramine, charcoal, clay and chlorella, antioxidants, probiotics, and induced sweating.

  5. Image dissector photocathode solar damage test program. [solar radiation shielding using a fast optical lens

    Science.gov (United States)

    Smith, R. A.

    1977-01-01

    Image dissector sensors of the same type which will be used in the NASA shuttle star tracker were used in a series of tests directed towards obtaining solar radiation/time damage criteria. Data were evaluated to determine the predicted level of operability of the star tracker if tube damage became a reality. During the test series a technique for reducing the solar damage effect was conceived and verified. The damage concepts are outlined and the test methods and data obtained which were used for verification of the technique's feasibility are presented. The ability to operate an image dissector sensor with the solar image focussed on the photocathode by a fast optical lens under certain conditions is feasible and the elimination of a mechanical protection device is possible.

  6. Damage-plasticity model of the host rock in a nuclear waste repository

    Energy Technology Data Exchange (ETDEWEB)

    Koudelka, Tomáš; Kruis, Jaroslav, E-mail: kruis@fsv.cvut.cz [Department of Mechanics, Faculty of Civil Engineering, Czech Technical University in Prague, Thákurova 7, 166 29 Prague (Czech Republic)

    2016-06-08

    The paper describes damage-plasticity model for the modelling of the host rock environment of a nuclear waste repository. Radioactive Waste Repository Authority in Czech Republic assumes the repository to be in a granite rock mass which exhibit anisotropic behaviour where the strength in tension is lower than in compression. In order to describe this phenomenon, the damage-plasticity model is formulated with the help of the Drucker-Prager yield criterion which can be set to capture the compression behaviour while the tensile stress states is described with the help of scalar isotropic damage model. The concept of damage-plasticity model was implemented in the SIFEL finite element code and consequently, the code was used for the simulation of the Äspö Pillar Stability Experiment (APSE) which was performed in order to determine yielding strength under various conditions in similar granite rocks as in Czech Republic. The results from the performed analysis are presented and discussed in the paper.

  7. Putting Order into Our Universe: The Concept of Blended Learning—A Methodology within the Concept-based Terminology Framework

    Directory of Open Access Journals (Sweden)

    Joana Fernandes

    2016-06-01

    Full Text Available This paper aims at discussing the advantages of a methodology design grounded on a concept-based approach to Terminology applied to the most prominent scenario of current Higher Education: blended learning. Terminology is a discipline that aims at representing, describing and defining specialized knowledge through language, putting order into our universe (Nuopponen, 2011. Concepts, as elements of the structure of knowledge (Sager, 1990 emerge as a complex research object. Can they be found in language? A concept-based approach to Terminology implies a clear-cut view of the role of language in terminological work: though language is postulated as being a fundamental tool to grasp, describe and organize knowledge, an isomorphic relationship between language and knowledge cannot be taken for granted. In other words, the foundational premise of a concept-based approach is that there is no one-to-one correspondence between atomic elements of knowledge and atomic elements of linguistic expression. This is why a methodological approach to Terminology merely based upon specialized text research is regarded as biased (Costa, 2013. As a consequence, we argue that interactional strategies between terminologist and domain expert deserve particular research attention. To our mind, the key to concept-based terminological work is to carry out a concept analysis of data gathered from a specialised text corpora combined with an elicitation process of the tacit knowledge and concept-oriented discursive negotiation. Following such view, we put forward a methodology to answer the question: how is blended learning defined in the Post-Bologna scenario? Even though there are numerous high-quality models and practical descriptions for its implementation (similarly to other concepts related to distance learning, the need to understand, demarcate and harmonize the concept of blended learning against the current Higher Education background results from the premise that

  8. Mathematical concepts for mechanical engineering design

    CERN Document Server

    Asli, Kaveh Hariri; Aliyev, Soltan Ali Ogli

    2013-01-01

    PrefaceIntroductionHeat Flow: From Theory to PracticeDispersed Fluid and Ideal Fluid MechanicsModeling for Pressure Wave into Water PipelineHeat Transfer and Vapor BubbleMathematical Concepts and Computational Approaches on Hydrodynamics InstabilityMathematical Concepts and Dynamic ModelingModeling for Predictions of Air Entrance into Water PipelineIndex

  9. Structural damage monitoring of harbor caissons with interlocking condition

    Energy Technology Data Exchange (ETDEWEB)

    Huynh, Thanh Canh; Lee, So Young; Nauyen, Khac Duy; Kim, Jeong Tae [Pukyong National Univ., Busan (Korea, Republic of)

    2012-12-15

    The objective of this study is to monitor the health status of harbor caissons which have potential foundation damage. To obtain the objective, the following approaches are performed. Firstly, a structural damage monitoring(SDM) method is designed for interlocked multiple caisson structures. The SDM method utilizes the change in modal strain energy to monitor the foundation damage in a target caisson unit. Secondly, a finite element model of a caisson system which consists of three caisson units is established to verify the feasibility of the proposed method. In the finite element simulation, the caisson units are constrained each other by shear key connections. The health status of the caisson system against various levels of foundation damage is monitored by measuring relative modal displacements between the adjacent caissons.

  10. Structural damage monitoring of harbor caissons with interlocking condition

    International Nuclear Information System (INIS)

    Huynh, Thanh Canh; Lee, So Young; Nauyen, Khac Duy; Kim, Jeong Tae

    2012-01-01

    The objective of this study is to monitor the health status of harbor caissons which have potential foundation damage. To obtain the objective, the following approaches are performed. Firstly, a structural damage monitoring(SDM) method is designed for interlocked multiple caisson structures. The SDM method utilizes the change in modal strain energy to monitor the foundation damage in a target caisson unit. Secondly, a finite element model of a caisson system which consists of three caisson units is established to verify the feasibility of the proposed method. In the finite element simulation, the caisson units are constrained each other by shear key connections. The health status of the caisson system against various levels of foundation damage is monitored by measuring relative modal displacements between the adjacent caissons

  11. Database Concepts in a Domain Ontology

    Directory of Open Access Journals (Sweden)

    Gorskis Henrihs

    2017-12-01

    Full Text Available There are multiple approaches for mapping from a domain ontology to a database in the task of ontology-based data access. For that purpose, external mapping documents are most commonly used. These documents describe how the data necessary for the description of ontology individuals and other values, are to be obtained from the database. The present paper investigates the use of special database concepts. These concepts are not separated from the domain ontology; they are mixed with domain concepts to form a combined application ontology. By creating natural relationships between database concepts and domain concepts, mapping can be implemented more easily and with a specific purpose. The paper also investigates how the use of such database concepts in addition to domain concepts impacts ontology building and data retrieval.

  12. Suppression and Narrative Time Shifts in Adults with Right-Hemisphere Brain Damage

    Science.gov (United States)

    Scharp, Victoria L.; Tompkins, Connie A.

    2013-01-01

    Purpose: This study examined the functioning of a central comprehension mechanism, suppression, in adults with right-hemisphere damage (RHD) while they processed narratives that cued a shift in time frame. In normal language comprehension, mental activation of concepts from a prior time frame is suppressed. The (re)activation of information…

  13. Scenario based approach to structural damage detection and its value in a risk and reliability perspective

    DEFF Research Database (Denmark)

    Hovgaard, Mads Knude; Hansen, Jannick Balleby; Brincker, Rune

    2013-01-01

    A scenario- and vibration based structural damage detection method is demonstrated though simulation. The method is Finite Element (FE) based. The value of the monitoring is calculated using structural reliability theory. A high cycle fatigue crack propagation model is assumed as the damage mecha......- and without monitoring. Monte Carlo Sampling (MCS) is used to estimate the probabilities and the tower of an onshore NREL 5MW wind turbine is given as a calculation case......A scenario- and vibration based structural damage detection method is demonstrated though simulation. The method is Finite Element (FE) based. The value of the monitoring is calculated using structural reliability theory. A high cycle fatigue crack propagation model is assumed as the damage...

  14. Damage analysis: damage function development and application

    International Nuclear Information System (INIS)

    Simons, R.L.; Odette, G.R.

    1975-01-01

    The derivation and application of damage functions, including recent developments for the U.S. LMFBR and CTR programs, is reviewed. A primary application of damage functions is in predicting component life expectancies; i.e., the fluence required in a service spectrum to attain a specified design property change. An important part of the analysis is the estimation of the uncertainty in such fluence limit predictions. The status of standardizing the procedures for the derivation and application of damage functions is discussed. Improvements in several areas of damage function development are needed before standardization can be completed. These include increasing the quantity and quality of the data used in the analysis, determining the limitations of the analysis due to the presence of multiple damage mechanisms, and finally, testing of damage function predictions against data obtained from material surveillance programs in operating thermal and fast reactors. 23 references. (auth)

  15. Damage Detection of Refractory Based on Principle Component Analysis and Gaussian Mixture Model

    Directory of Open Access Journals (Sweden)

    Changming Liu

    2018-01-01

    Full Text Available Acoustic emission (AE technique is a common approach to identify the damage of the refractories; however, there is a complex problem since there are as many as fifteen involved parameters, which calls for effective data processing and classification algorithms to reduce the level of complexity. In this paper, experiments involving three-point bending tests of refractories were conducted and AE signals were collected. A new data processing method of merging the similar parameters in the description of the damage and reducing the dimension was developed. By means of the principle component analysis (PCA for dimension reduction, the fifteen related parameters can be reduced to two parameters. The parameters were the linear combinations of the fifteen original parameters and taken as the indexes for damage classification. Based on the proposed approach, the Gaussian mixture model was integrated with the Bayesian information criterion to group the AE signals into two damage categories, which accounted for 99% of all damage. Electronic microscope scanning of the refractories verified the two types of damage.

  16. Crack diagnosis of metallic profiles based on structural damage indicators

    International Nuclear Information System (INIS)

    Preisler, A; Schröder, K-U; Steenbock, C

    2015-01-01

    Structural Health Monitoring (SHM) faces several challenges before large-scale industrial application. First of all damage diagnosis has to be reliable. Therefore, common SHM approaches use highly advanced sensor techniques to monitor the whole structure on all possible failures. This results in an enormous amount of data gathered during service. The general effort can be drastically reduced, if the knowledge achieved during the sizing process is used. During sizing, potential failure modes and critical locations, so called hot spots, are already evaluated. A very sensitive SHM system can be developed, when the monitoring effort shifts from the damage to its impact on the structural behaviour and the so called damage indicators. These are the two main components of the SmartSHM approach, which reduces the monitoring effort significantly. Not only the amount of data is minimized, but also reliability and robustness are ensured by the SmartSHM approach.This contribution demonstrates the SmartSHM approach by a cracked four point bending beam. To show general applicability a parametric study considering different profiles (bar, box, I, C, T, L, Z), crack positions and lengths has been performed. Questions of sensitivity and minimum size of the sensor network are discussed based on the results of the parametric study. (paper)

  17. Compact magnetic fusin reactor concepts

    International Nuclear Information System (INIS)

    Chung, K.M.

    1984-01-01

    Compact, high-power-density approaches to fusion power represent alternatives to main-line fusion concepts, Tokamaks and mirrors. If technological issues are resolved, theses approaches would yield small, low-cost fusion power plants. This survey reviews the principal physics and technology employed by leading compact magnetic fusion plants. (Author)

  18. Damage Detection in Railway Truss Bridges Employing Data Sensitivity under Bayesian Framework: A Numerical Investigation

    Directory of Open Access Journals (Sweden)

    Kanta Prajapat

    2017-01-01

    Full Text Available In general, for a structure it is quite difficult to get information about all of its modes through its dynamic response under ambient or external excitation. Therefore, it is vital to exhaustively use the available information in the acquired modal data to detect any damage in the structures. Further, in a Bayesian algorithm, it can be quite beneficial if a damage localization algorithm is first used to localize damage in the structure. In this way, the number of unknown parameters in the Bayesian algorithm can be reduced significantly and thus, the efficiency of Bayesian algorithm can be enhanced. This study exploits a mode shape and its derivative based approach to localize damage in truss type structures. For damage quantification purpose, a parameter sensitivity based prediction error variance approach in Bayesian model updating is employed, which allows extracting maximum information available in the modal data. This work employs the sensitivity based Bayesian algorithm to determine the posterior confidence in truss type railway bridges. Results of the study show that the proposed approach can efficiently detect and quantify damage in railway truss bridges.

  19. The Bobath concept in stroke rehabilitation: a focus group study of the experienced physiotherapists' perspective.

    Science.gov (United States)

    Lennon, S; Ashburn, A

    2000-10-15

    The Bobath concept, usually known as neuro-developmental treatment (NDT) in America, is one of the major approaches used to rehabilitate patients following stroke; however since the last publication of Bobath (1990), the concept has been taught via an oral tradition on postgraduate courses. This study therefore aimed to explore with experienced therapists firstly how the Bobath concept had changed since 1990, and secondly what they considered its main theoretical assumptions to be using a focus group research design. Eight peer-nominated expert physiotherapists agreed to participate in two focus groups organized according to specialist interest in either neurology (group A) or elderly care (group B). Therapists were asked to discuss six topics based on a review of published literature. Data analysis involved several readings of verbatim transcriptions, from which key themes and concepts were developed. All therapists agreed on the following core themes defining Bobath: analysis of normal movement, control of tone and facilitation of movement. Neuroplasticity was described as the primary rationale for treatment with therapists using afferent information to target the damaged central nervous system. In addition group A discussed motor learning, whereas group B discussed patient focused goals and relating treatment to function. This study highlighted changes in theory, terminology, and techniques. Tone remained a major problem in the rehabilitation management of the hemiplegic patient; however much attention was also directed towards the musculoskeletal system. Both facilitation of normal movement components and task specific practice using specific manual guidance were considered critical elements of the Bobath concept. For Bobath therapists, physiotherapy has an important impact on both the performance components of movement and functional outcomes. In view of the small numbers involved in this preliminary study, further studies are now needed to determine if these

  20. Building Damage Extraction Triggered by Earthquake Using the Uav Imagery

    Science.gov (United States)

    Li, S.; Tang, H.

    2018-04-01

    When extracting building damage information, we can only determine whether the building is collapsed using the post-earthquake satellite images. Even the satellite images have the sub-meter resolution, the identification of slightly damaged buildings is still a challenge. As the complementary data to satellite images, the UAV images have unique advantages, such as stronger flexibility and higher resolution. In this paper, according to the spectral feature of UAV images and the morphological feature of the reconstructed point clouds, the building damage was classified into four levels: basically intact buildings, slightly damaged buildings, partially collapsed buildings and totally collapsed buildings, and give the rules of damage grades. In particular, the slightly damaged buildings are determined using the detected roof-holes. In order to verify the approach, we conduct experimental simulations in the cases of Wenchuan and Ya'an earthquakes. By analyzing the post-earthquake UAV images of the two earthquakes, the building damage was classified into four levels, and the quantitative statistics of the damaged buildings is given in the experiments.