WorldWideScience

Sample records for da irradiacao laser

  1. Histopathological study of the effects of low-intensity laser irradiation ({lambda}=650 nm) on dental pulp tissue after cavity preparation; Estudo histopatologico dos efeitos da irradiacao laser em baixa intensidade ({lambda}=650nm) em tecido pulpar apos preparo cavitario

    Energy Technology Data Exchange (ETDEWEB)

    Bertella, Claudio

    2001-07-01

    The purpose of this study was to evaluate (in vivo) the effects of low-intensity Arsenide Gallium Aluminium laser application post-cavity preparation class 1. Six patients with bilateral pre-molars and molars indicated to extraction for orthodontics aim were selected. Four samples of these teeth underwent cavity preparation with deep from medium to high and two samples underwent cavity preparation from high to pulp expositions. The samples were constituted of two teeth of the same patient and received different treatments. One of the teeth underwent laser exposition and the other one was maintained as control, before restorative procedure with polycarboxylate cement. A diode laser ({lambda}=650 nm), output power 30 mW and fluencies of 1,8 J/cm{sup 2} and 2,7 J/cm{sup 2} in pre-molars and molars, respectively, was used for irradiation with repetition rate of 18 Hz in interrupted continuous wave mode. After seven days, the teeth were extracted and processed histologically with HE to verify morphological changes in the pulpy tissue. The four samples, which cavity preparation and restorative material were not in contact with the pulp, did not show histological differences between irradiated and non-irradiated teeth. Both of them presented the same characteristics of normality. The two samples with exposed pulpy tissue showed different results. The irradiated teeth presented no or slight inflammatory signs when compared to the control samples, which showed abscess in the coronary pulp interior and intense inflammatory infiltrated. These results suggest that the laser irradiation can be used as a therapeutic modality in clinical trials, in the conditions employed in this study. (author)

  2. Irradiation effects of GaAlAs ({lambda}=830 nm) laser on oral traumatic ulceration; Avaliacao dos efeitos da irradiacao de ulceras traumaticas na cavidade bucal com o laser de GaAlAs ({lambda}=830 nm)

    Energy Technology Data Exchange (ETDEWEB)

    Senna, Andre Machado de

    2003-07-01

    Low intensity GaAlAs ({lambda}=830 nm) laser irradiation effects on oral traumatic ulceration were evaluated. For this purpose, twenty patients presenting orthodontic appliance - induced oral traumatic ulceration were randomly distributed in two groups. Patients in group 1 were submitted to the irradiation procedure and group 2 was the control one. The irradiation parameters employed were the following: wavelength 830 nm, one single application of 4 J/cm{sup 2}, punctual in the contact mode and 30 mW power. The control group received the conventional treatment, consisting on topical application of Triancinolon based ointment four times a day. For both groups the agent responsible for the trauma was removed or covered with utility wax whenever removal was impossible. The results were evaluated concerning the wounds size reduction and pain relief. The time of laser irradiation was considered the starting time (time zero) and analysis were done 24 hours, 48 hours and seven days after that. The statistical analysis showed an acceleration in the healing process as well accentuated pain reduction for the irradiated group compared to the control one. These evidences allows us to indicate this protocol of one single application of 4 J/cm{sup 2} as therapy when patients with oral traumatic ulceration can not attend several sessions for a multiple application procedure. (author)

  3. Evaluation in vitro of effects of Er:YAG and Nd:YAG lasers irradiation on root canal wall, by stereoscopy, scanning electron micrography and thermographic camera; Avaliacao in vitro dos efeitos da irradiacao laser de Er:YAG e Nd:YAG na parede dentinaria do canal radicular, sob observacao do estereoscopio, da micrografia eletronica e da camera termografica

    Energy Technology Data Exchange (ETDEWEB)

    Goya, Claudia

    2001-07-01

    This study was carried out to evaluate in vitro the effects of Nd:YAG laser and Er:YAG laser irradiation in the root canal wall by SEM, evaluating the apical leakage and the temperature changes during the laser irradiation. Seventy four extracted human teeth were used, they were instrumented and divided into seven groups of 10 teeth each. The teeth were evaluated through stereoscopy, by SEM, and with the thermographic camera. The Nd:YAG laser irradiation parameters were 100 mJ/p, 15 Hz, and Er:YAG laser were 160 mJ/p and 10 Hz, the irradiation was 4 times at 2 mm/sec speed, with 20 sec interval. The apical leakage was not observed in the teeth irradiated by Nd:YAG laser alone or in association with Er:YAG laser. However in the teeth irradiated only by the Er:YAG laser we observed a little leakage. By SEM observation the Nd:YAG laser irradiation showed melting and recrystallization in the dentin surface closing dentinal tubules, and in the samples irradiated by Er:Y AG laser a clean surface, opened dentinal tubules, and the combination by two lasers, showed melting covering some dentinal tubules The thermographic study found the temperature increase was not more than 6 deg C. This study showed the safety parameters applications of Er:YAG laser in association with Nd:YAG laser in root canal treatment, in order to not cause thermal damages to the periodontal tissues. (author)

  4. In vitro evaluation of marginal microleakage in class V restorations with composite resin in bovine teeth. Laser irradiation influences and the adhesive system in the dentin pre-treatment; Avaliacao in vitro da microinfiltracao marginal em restauracoes de classe V com resina composta em dentes bovinos. Influencia da irradiacao laser e sistema adesivo no pre-tratamento dentinario

    Energy Technology Data Exchange (ETDEWEB)

    Carvalho, Wendell Lima de

    2003-07-01

    Microleakage is one of the most important reasons to restorations failure, it is the responsible for marginal colors changing, new caries, hipersensibility and pulpar diseases. Several techniques and materials have been studied to eliminate or, at least, to decrease microleakage. The cavities preparation with Er:YAG laser and autoconditioning adhesive are some of these techniques and materials. This research has the objective to compare, in vitro, microleakage in class V cavities, prepared with high rotation (conventional treatment), Er:YAG laser (Enamel-400 mj/2 Hz/128,38 J/Cm{sup 2}, Dentin 250 mJ/ 2 Hz/ 80,24 J/Cm{sup 2}) and the treatment made at dentin with autoconditioning adhesive (Clerafil SE Bond) using Er:YAG laser (with water or not water) or not using Er:YAG laser. It was used 48 bovines teeth with cavities prepared in vestibular face and gingival wall on cement enamel junction and oclusal wall on enamel. The materials used were autoconditioning adhesive (Clerafil SE Bond) and composite resin Z250. Teeth were divided into four groups of twelve samples each one, according to dentin treatment. Group 1 - Conventional cavity and autoconditioning adhesive. Group 2- Cavity prepared with Er: YAG laser and autoconditioning adhesive. Group 3 - Cavity prepared with Er:YAG laser and dentin conditioning with Er:YAG laser associated to water and autoconditioning adhesive. Group 4 - Cavity prepared with Er:YAG laser and dentin conditioning with Er: YAG laser without water and associated to autoconditioning adhesive. Teeth were restored and stocked at 37 deg C, thermocycled and placed into a 50% silver nitrate solution. Right after, teeth were sliced and evaluated on a stereo microscopic magnifying glass in order to see microleakage degree trying to follow a score from 0 to 3. The findings were submitted to Fisher, Anderson-Darling tests and to the not parametric Sen and Puri test. The results indicated that in gingival edge, the Group 2 showed less microleakage than

  5. Evaluation of temperature variation in pulp chamber after high power diode laser irradiation ({lambda}=830 nm) on dental enamel: 'in vitro' study; Avaliacao da variacao da temperatura na camara pulpar apos a irradiacao de diodo laser de alta potencia de 830 nanometros em esmalte dental: estudo 'in vitro'

    Energy Technology Data Exchange (ETDEWEB)

    Macri, Rodrigo Teixeira

    2001-07-01

    The aim of this study was to observe the variation of temperature in the pulp chamber caused by irradiation of a commercial diode laser operating in continuous wave with wavelength 830 nm over the dental enamel. In the first part of this study, two types of tooth models were tested: 3,5 mm slice and whole tooth. In the second part, we irradiated the buccal si de of the enamel in 2 primary lower incisors from cattle with Opus 10 diode laser for 10 s with power levels of 1 W and 2 W, always using an absorber. Two thermocouples were used. The first one was inserted in the dentin wall closest to the irradiation site, while the second was inserted in the middle of the pulp chamber. It was observed that the thermocouples registered different temperatures. Always, the dentin thermocouple registered higher temperatures. Considering the dentin records, the irradiation of 1 W for 10 s can be safe for the pulp. Further studies must be developed related to the correct positioning of the thermocouples inside the pulp chamber. This was a first step of using diode laser in enamel, and in this study, we concluded that the Opus 10 diode laser shown to be safe for this use, with 1 W power for 10 S. (author)

  6. Potential of sub-ablative pulsed CO{sub 2} laser irradiation on inhibition of artificial caries-like lesion progress in bovine dental enamel; Potencial de inibicao da progressao da carie artificial por irradiacao sub-ablativa com laser de CO{sub 2} pulsado em esmalte dental bovino

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Marcella Esteves

    2005-07-01

    The aim of this study was to investigate whether sub-ablative pulsed C0{sub 2} laser (1 0,6 {mu}m) irradiation is capable of reducing the susceptibility of the dental enamel to demineralization, and thus achieving a potential caries-protective effect. The crowns of 51 bovine front teeth, embedded in acrylic resin and polished until exposure of flat enamel surface, were used. The samples were cut in cubes of 10x10 mm, and totally coated with acid-resistant nail varnish, except for an enamel exposed window of 16 mm square. Three groups (n=17) were obtained: control group (CG) not irradiated; group laser A (LA) and group laser B (LB) where the samples were irradiated. The conditions were 60 mJ, 100 Hz, 0,3 J/cm{sup 2} for LA and 135 mJ, 10 Hz, 0,7 J/cm{sup 2} for LB. Two samples of each group were submitted to SEM analysis and fifteen to demineralization in 3 ml acetate buffer solution (0,1 mol/L) with pH 4,5 for 24h at 37 deg C, with regular agitation. After the specimens were removed from the solution, the calcium and phosphorous content were measured with an inductively coupled plasma optical emission spectrometer and 2 more samples of each were submitted to SEM analysis. The obtained Ca and P means in {mu}g/ml and the calculated Ca/P molar ratio were: CG (367,88 {+-} 33,47; 168,91 {+-} 14,55; 1,70 {+-} 0,07) ; LA (372,70 {+-} 41,70; 161,46 {+-} 15,26; 1,79 {+-} 0,07) and LB (328,87 {+-} 24,91; 145,02 {+-} 11,04; 1,77 {+-} 0,05). The ANOVA statistical test revealed statistically significant difference for [Ca], [P] e Ca/P content between the groups (p<0,05). The Tukey test results showed that LB had significantly lower means of Ca and P content in demineralization solution than the other groups (p<0,01), and between LA and control there was not statistically significant difference. For the Ca/P molar ratio LA and LB means were significantly higher than the control (p<0,01) and there was not statistical difference between the two irradiated groups. SEM observations

  7. A study in vitro on radiation effects by Er:YAG laser combined with the fluorine therapy in the acid resistance of the dental enamel submitted to orthodontical brackets; Um estudo in vitro sobre os efeitos da irradiacao pelo laser de Er:YAG combinado com a terapia com fluor na resistencia acida do esmalte de dentes submetidos a aparelho ortodontico fixo

    Energy Technology Data Exchange (ETDEWEB)

    Yoshiyasu, Roseli Y A

    2001-07-01

    Several researches have been demonstrating an increase in the resistance acid of the enamel surface when irradiated by some lasers types as Nd:YAG, C0{sub 2}, Er:YAG, and others, mainly when combined with the fluoride therapy after the irradiation of the laser. This study in vitro used the laser of Er:YAG which density of energy of 8.1 J/cm{sup 2} on the enamel about of orthodontical brackets of teeth extracted pre-molars. These teeth were then submitted to a rich way in S. mutans for twenty one days. The cases were analyzed: (1) enamel surface without any treatment, (2) enamel surface without any irradiation laser, but with therapy with acidulated phosphate fluoride, (3) enamel surface irradiated with laser of Er:YAG and (4) enamel surface irradiated by laser of Er:YAG and with application of acidulated phosphate fluoride. The results were analyzed through optical microscopy and scanning electron microscopy. The morphologic changes observed to the scanning electron microscopy suggest increase in the acid resistance of the enamel surface. However, to the optical microscopy, it was still possible to visualize undesirable white stains in the surface of the enamel. (author)

  8. Effects of low-energy laser irradiation on the distalization velocity during experimental canine tooth movement in humans: 'comparative clinical study'; Efeitos da irradiacao com laser em baixa intensidade na velocidade de distalizacao de caninos durante a movimentacao ortodontica: 'estudo clinico comparativo'

    Energy Technology Data Exchange (ETDEWEB)

    Cruz, Delma Rebelo

    2003-07-01

    This research investigated the effects of low level laser therapy (LLLT) upon the velocity of canine tooth movement and consequently bone remodeling. A total of eleven patients were treated with a 780 nm diode laser. One side of the upper arcade was considered control group and was not irradiated but received mechanical activation every thirty days. The opposite side received the same mechanical activation but was also irradiated at days 0, 3, 7 and 14 of each month. Data of the biometrical progress were taken on both sides on days 3,7,14,21 and 30 of each month. The results indicate that all patients showed significant acceleration of the distalization velocity on the side treated with LLLT when compared to the control. (author)

  9. Evaluation of effects of laser irradiation therapy ({lambda}=830 nm) on oral ulceration induced by fixed orthodontic appliances; Efeito terapeutico da irradiacao com laser de arseneto de galio aluminio ({lambda}=830 nm) em lesoes provocadas pelo aparelho ortodontico fixo na cavidade oral

    Energy Technology Data Exchange (ETDEWEB)

    Rodrigues, Maria Teresa Jabur

    2001-07-01

    Twenty patients presenting fixed orthodontic appliance - induced oral ulceration were randomly chosen for this study. These patients were then divided into two groups. In Group ,1 the ulceration was submitted to low intensity infrared laser ({lambda}=830 nm), at 30 mW fluency per point 1,3 J/cm{sup 2} at an exposure time ranging from 3s to 33s, depending on ulceration size. Ulceration was irradiated on the first day, the process being repeated 24 and then 48 hours later. Evaluations were made seven days after the first irradiation. Group 2 comprised of patients who were exposed to conventional treatment where wax was used to cover the afflicted area. These patients also took triancinolona. Evaluation was made on the same day. In both groups the cause of irritation was eliminated whenever was possible. Clinical results pointed out that the healing process was slightly faster in cases of LILT treated oral ulceration. The latter also presented significant decrease in symptoms of pain. Comparative statistical evaluation results between both groups has shown that in the case of Group 1 patients (those submitted to low-intensity infrared laser beam): 1) Healing process was faster with reduction of sore areas; 2) immediate relief of pain following first irradiation, as stated by patients. Taking into consideration the vast amount of patients who are bearers of fixed orthodontic appliances and whose most usual and frequent complaint is pain and irritation, the use of LILT is highly recommended due to its simplicity and efficacy. (author)

  10. Comparative analysis of the effect of the GaAlAs laser irradiation in 780 nm and 660 nm in the hypersensitive dentin; Analise comparativa do efeito da irradiacao do laser de GaAlAs em 780 nm e 660 nm na hipersensibilidade dentinaria

    Energy Technology Data Exchange (ETDEWEB)

    Yuan, Sun Chien

    2003-07-01

    This study was to evaluate and compare the effects of the low intensity in laser radiation among GaAlAs 780 nm and GaAlAs 660 nm. The main proposal is to verify if there is any difference of the effects or results in low intensity laser application treatment of hypersensitive dentin, keeping the same parameters, only differing in wavelength. The samples were distributed in two groups. Group A 90 cases, treated with GaAlAs 780 nm and group B irradiated with GaAlAs 660 nm with a total of 76 cases analyzed. The results of application with GaAlAs 660 nm and GaAlAs 780 nm do not differ statistically. Which means using any one of the irradiation gives the same results. However can be noted that the response of reduction of hypersensitivity is faster with the radiation of GaAlAs 780 nm, but the results after three applications is the same for both types of radiation. (author)

  11. Modeling of thermal and optical effects in dental pulp during the irradiation with neodymium and diode lasers; Modelagem dos efeitos termicos e opticos na polpa dentaria durante a irradiacao com os lasers de diodo de neodimio

    Energy Technology Data Exchange (ETDEWEB)

    Farhat, Patricia Bahls de Almeida

    2003-07-01

    During the development of applications of high intensity lasers in the enamel and dentine, adverse thermal effects into the entire dental structure, including the pulp, must be verified. The measurement of the temperature in the intact pulp, however, is not a solved problem. For this purpose, models have been used frequently, using extracted teeth, with pulpal cavities filled with materials that simulate only thermal properties of the pulp. Current models, however, do not simulate optical properties of the pulp, not taking the remaining radiation in the pulp chamber into account. The aim of this study was to verify if the remaining radiation from neodymium and diode lasers that reach the pulp chamber, at the models using extracted bovine teeth, can cause local thermal effects. For this purpose, two models were developed, using extracted bovine teeth with their pulp chambers filled with water (simulating pulp thermal characteristics) without (model 1) and with (model 2) an optical absorbent. Models were radiated with 1 W. The obtained results show that, for both lasers, the temperature rise in model 2 pulp chamber is: up to 11 % higher than in the model 1 when the enamel is radiated; and up to 37% higher than in the model 1 when dentine is radiated (1 mm from the pulp), indicating that the level of the remaining radiation is relevant for the construction of models excited by the neodymium and diode lasers. (author)

  12. Surface morphological changes on the human dental enamel and cement after the Er:YAG laser irradiation at different incidence angles; Avaliacao morfologica das superficies do esmalte e do cimento dental apos a irradiacao do laser de Er:YAG em diferentes angulacoes

    Energy Technology Data Exchange (ETDEWEB)

    Tannous, Jose Trancoso

    2001-07-01

    This is a morphological analysis study through SEM of the differences of the laser tissue interaction as a function of the laser beam irradiation angle, under different parameters of energy. Fourteen freshly extracted molars stored in a 0,9% sodium chloride solution were divided in seven pairs and were irradiated with 100, 200, 300, 400, 500, 600 and 700 mJ per pulse, respectively. Each sample received three enamel irradiations and three cement irradiations, either in the punctual or in the contact mode, one near to the other, with respectively 30, 45 and 90 inclinations degrees of dental surface-laser-beam incidence. Four Er:YAG pulses (2,94 {mu}m, 7-20 Hz, 0,1-1 J energy/pulse - Opus 20 - Opus Dent) with water cooling system (0,4 ml/s) were applied. After the laser irradiation the specimens were analysed through scanning electron microscope (SEM). The results were analysed by SEM micrographs showing a great difference on the laser tissue interaction characteristics as a function of the irradiation angle of the laser beam. All the observations led to conclude that, considering the laser parameters used, the incidence angle variation is a very important parameter regarding the desired morphological effects. This represents an extremely relevant detail on the technical description of the Er:YAG laser irradiation protocols on dental tissues. (author)

  13. IL RILIEVO LASER 3D DA PIATTAFORMA AEREA IN ARCHEOLOGIA

    Directory of Open Access Journals (Sweden)

    Alessandro Sebastiani

    2012-04-01

    Full Text Available

    Partendo da un'analisi prettamente archeologica del sito dei templi dello Scoglietto, nella quale si delinea il contesto sul quale si è deciso di operare con metodo LiDAR-FW, si illustrerà questa tecnologia fornendo le linee della strategia di elaborazione della point-cloud di punti laser che sarà utilizzata nella fase di estrazione ed elaborazione del DTM del sito.

     

    LiDAR - Full Waveform

    The LiDAR-FullWaveform was applied to the archaeological site of the temples of Scoglietto (GR. Starting from a purely archaeologi-cal analysis, we decided to work with this technology and we will explain the methodology applied technology.

  14. Analgesia preemptiva com dipirona versus ibuprofeno na fotocoagulação a laser da retina

    Directory of Open Access Journals (Sweden)

    Artur Macaferri Del Santo

    2016-02-01

    Full Text Available RESUMO Objetivo: Comparar a efetividade da dipirona versus o ibuprofeno para a redução da dor na fotocoagulação da retina (FR. Método: Foi realizado um estudo controlado, duplo cego e randomizado englobando trinta e quatro pacientes com retinopatia diabética separados em dois grupos. Grupo A recebeu 1000mg de dipirona e o grupo B recebeu 600mg de ibuprofeno. A dor foi avaliada pela escala visual analógica. Resultado: A média do escore da dor nos grupos A e B foi de 5,2 ± 2.6 e 4,5 ± 1,4, respectivamente. Não houve diferença estatística entre os grupos (p=0,34. O mesmo foi observado quanto à analise entre dor leve, moderada e grave (p=0,09. Os grupos foram semelhantes quanto à idade e sexo. Conclusão: Os medicamentos foram equivalentes ou equipotentes em reduzir a dor ocular durante a fotocoagulação a laser da retina.

  15. Quality evaluation of blood irradiation process;Avaliacao da qualidade do processo de irradiacao de hemocomponentes

    Energy Technology Data Exchange (ETDEWEB)

    Goto, R.E.; Medeiros, R.B. [Universidade Federal de Sao Paulo (DDI/UNIFESP), SP (Brazil). Dept. de Diagnostico por Imagem. Coordenadoria de Fisica e Higiene das Radiacoes

    2009-07-01

    An adverse reaction in blood transfusion is the graft versus host disease (GVHD). This disease affects immunodeficient or immunosuppressed patients where transfused T cells proliferate and initiate a host's immune system reaction. Blood gamma irradiation is the most efficient way to inhibit lymphocyte T blastic transformation and mitotic activity and it is the most effective method to combat this disorder. However, there is no fast and effective system to analyze the dose distribution in the irradiation process and guarantee that the absorbed doses are in agreement with FDA recommendations. This study aims to establish a periodic quality control of the gammacell irradiators using radiochromic films properly calibrated. The quality control is simply and effective to combat GVHD as well as is useful to detect mechanical fails at rotation set system through the dose uniformity analysis. It was possible to verify the uniformity ranged from -72.38% to 106.33% and some blood bag received doses not compatible with recommended international threshold. (author)

  16. Intensification of the amethyst color by irradiation; Intensificacao da cor de ametista por irradiacao

    Energy Technology Data Exchange (ETDEWEB)

    Gorski, Maria Silvia [Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, SP (Brazil)

    2000-07-01

    Brazil is great natural quartz producer. Amethyst, variety of the violet color is very appreciated in the world and since the Antiquity it is said to have many supernatural powers. Is the most highly valued stone in the quartz group and the graduation of the color is responsible for the commercial value that varies of US$ 0.5 to US$ 25.0 for carat. As carried through studies the violet color is related with the amount of Fe{sup 4+} distributed in the crystal . The present work consists of the induction and intensification of the violet color by rays gamma of sources of Co-60 in quartz samples of diverse origins. It was used analyses by fluorescence for X-rays in samples of amethyst and citrine for the evaluation of the the iron and aluminium for the induction of the violet color. (author)

  17. EFICÁCIA CLÍNICA DO LASER ACUPUNTURAL NO TRATAMENTO DA DESORDEM TEMPOROMANDIBULAR

    Directory of Open Access Journals (Sweden)

    Diego Rodrigues Pessoa

    2016-12-01

    Full Text Available A disfunção temporomandibular (DTM é a condição mais frequente de dor orofacial crônica. A DTM é caracterizada pela a presença de sinais e sintomas na região orofacial. A acupuntura e Terapia a laser de baixa intensidade (TLBI vêm sendo empregadas no tratamento da DTM. A acupuntura consiste na inserção de agulhas em acupontos específicos do corpo para promover efeitos terapêuticos. A TLBI é uma modalidade de tratamento não invasiva, que vem sendo utilizada com frequência na prática clínica para o tratamento das DTM. Diante do exposto, o objetivo deste estudo foi realizar revisão de literatura, acerca da eficácia clinica do laser acupuntural em pacientes com a DTM. O emprego do laseracupuntural no tratamento das DTM favorece o controle antálgico, miorrelaxante e anti-inflamatório, no entanto, são necessárias novas pesquisas acerca do tema para determinar a eficácia do laser acupuntural em longo prazo para o tratamento de desordens temporomandibulares.

  18. Vaporização a laser do cervix para tratamento da neoplasia intraepitelial cervical

    Directory of Open Access Journals (Sweden)

    Euridice Maria de Almeida Figueiredo

    Full Text Available O câncer cérvico-uterino é muito comum em vários países da América Latina. As estatísticas de mortalidade e as taxas de incidência demonstram a sua real importância. O cânver cérvico-uterino freqüentemente é uma doença progressiva iniciada com mudanças intra-epiteliais, que podem se transformar em um processo invasivo, sendo o nosso objetivo tratar precocemente estas lesões quando ainda é possível a cura de 100%. Em nosso estudo prospectivo foram selecionadas 21 pacientes com neoplasia cervical intra-epitelial reatreadas pela citplogia e diagnosticadas pela histopatologia após biópsia dirigida pela colposcopia. O método terapêutico empregado foi a vaporização a laser com o CO2. Tiveram como pré-requisito os seguintes critérios: informação segura pela colposcopia da zona de transformação e afastar a presença de câncer invasivo; a neoplasia epitelial cervical deve ocupar a ectocervix sem nenhuma extensão para o canal cervical e correlação positiva entre a citologia, colposcopia e histologia. O uso de laser CO2 com microscópio permitiu precisão na aplicação e com vantagens de ser um procedimento ambulatorial diminuindo estresse cirúrgico das pacientes. Foi realizado sem anestesia e com duração média de 15 minutos. A cicatrização completou-se em torno de três semanas e com cuidados operatórios mínimos. Somente dois casos tiveram sangramento vaginal discreto no quinto e décimo dia de pós-operatório, resolvido com tamponamento vaginal por 24 horas. A colposcopia, cirurgia e o seguimento foram feitos pelo autor, tendo uma paciente sido submetida a uma segunda vaporização no quinto mês de controle. Somente uma paciente teve recidiva no 26° mês de seguimento e complementará o tratamento. As vinte outras restantes estão em controle sem recidiva de doença. Em vista dos resultados obtivemos um percentual de cura de 95%, que coincide com a literatura. O uso de laser CO2 no tratamento das neoplasias

  19. O EMPREGO DA TERAPIA LASER DE BAIXA INTENSIDADE NO TRATAMENTO DA HERPES-ZÓSTER E NEURALGIA PÓS-HERPÉTICA COM ACOMETIMENTO OROFACIAL

    Directory of Open Access Journals (Sweden)

    Davidson Ribeiro Costa

    2016-12-01

    Full Text Available O herpes-zóster facial é definido como uma doença infecciosa, que durante seu desenvolvimento apresenta lesões dolorosas na região orofacial. A Neuralgia pós-herpética é uma complicação da HZ facial que é caracteriza pela sintomatologia  dolorosa. A terapia com laser  de baixa intensidade (TLBI tem sido amplamente divulgada nos meios científicos, devido o seu efeito positivo  na redução da dor em uma série de condições. Nesse contexto, o presente estudo objetivou analisar os principais efeitos da TLBI, com base na literatura, de forma a apresentar uma terapia alternativa, que pode ser empregada no tratamento da HZ facial e NPHT, salientando as doses e os possíveis locais para a irradiação em cada fase. A TLBI é uma terapia não invasiva, que não apresenta efeitos adversos, quando empregada de maneira correta. Essa terapia apresenta efeitos anti-álgico, anti-inflamatório, de reparo tecidual e neuronal, o que justifica a sua utilização no tratamento da HZ facial e NPHT.

  20. Efficacy and safety of green laser photocoagulation for threshold retinopathy of prematurity Eficácia e segurança da fotocoagulação com laser verde na retinopatia da prematuridade limiar

    Directory of Open Access Journals (Sweden)

    Rodrigo Pessoa Cavalcanti Lira

    2008-02-01

    Full Text Available PURPOSE: To report the efficacy and safety of green laser photocoagulation for threshold retinopathy of prematurity (ROP. METHODS: We reviewed the clinical records of the neonates who had undergone green laser photocoagulation for threshold ROP at the Federal University of Pernambuco in Brazil between January 2004 and January 2006. All procedures were conducted with local anesthetic drops. The neonates were monitored throughout the procedure by a neonatologist. A frequency-doubled solid state laser, diode-pumped, with 532 nm wavelength was used. The presence of tunica vasculosa lentis or cataract were excluded before laser treatment. The following preoperative data were obtained for each patient: age, birth weight and the grade of ROP. Postoperative data included complications associated with the laser treatment, grade of ROP and evaluation whether further surgery was necessary due to failure of laser photocoagulation. RESULTS: Twenty-two neonates underwent photocoagulation with green laser for threshold ROP. A total of 31 eyes were included in the study. The mean gestational age was 30 ± 3 weeks and the mean birth weight was 1120 ± 490 g. Regression of the disease after laser therapy was observed in 30 eyes (96.7%. Despite treatment one eye presented stage 4A. Only 7 eyes required repetitive laser therapy. No adverse effects such as burning anterior segment tissues or bleeding in the anterior chamber occurred. No posterior segment side-effects were observed. Cataract formation was not observed at the last follow-up examination. CONCLUSIONS: Green laser photocoagulation remains an effective and safe alternative to red laser photocoagulation and to cryotherapy in the treatment of threshold ROP.OBJETIVOS: Avaliar a eficácia e segurança da fotocoagulação com laser verde na retinopatia da prematuridade (ROP limiar. MÉTODOS: Foram revisados prontuários dos neonatos submetidos à fotocoagulação com laser verde para ROP limiar, na

  1. EFEITOS DA TERAPIA LASER DE BAIXA INTENSIDADE EM MODELO EXPERIMENTAL DE TENDINOPATIA EM RATOS: REVISÃO DE LITERATURA

    Directory of Open Access Journals (Sweden)

    Diego Rodrigues Pessoa

    2017-12-01

    Full Text Available Tendinopatia é o termo utilizado para descrever lesões que afetam os tendões (tendinites e tendinoses, caracterizada pela presença de inflamação e degeneração tecidual, associada à sobrecarga mecânica e a movimentos repetitivos. Diversas modalidades terapêuticas têm sido estudadas no tratamento das tendinopatias, entre elas, destaca-se a terapia a laser de baixa intensidade (TLBI que visa acelerar o processo regenerativo, diminuir a inflamação e reduzir a dor.  Diante do exposto, este trabalho teve como objetivo realizar revisão de literatura, de artigos científicos com foco nos efeitos da terapia a laser de baixa intensidade (TLBI, em modelo experimental de tendinopatia em ratos. O estudo baseou-se na investigação de publicações entre janeiro de 2011 a outubro de 2016, em bases de dados eletrônicas com o emprego dos descritores “tendinopatia”, “laserterapia”, “ratos”, “tendão” e “terapia a laser de baixa intensidade”, combinados aos descritores booleanos. Foram selecionados sete artigos que apontam que a TLBI possibilitou a redução de importantes marcadores pró-inflamatórios, tais como IL-6 e TNF-α, bem como a proliferação aumentada de tenócitos, independentemente da dosagem aplicada. Os estudos científicos selecionados nesta revisão sistemática sinalizaram efeitos positivos da TLBI, principalmente na modulação da resposta inflamatória aguda ou crônica após a indução da tendinopatia.

  2. O emprego do laser de CO2 no controle da cárie dentária = The use of CO2 laser on dental on dental caries control

    Directory of Open Access Journals (Sweden)

    Rodrigues, Lidiany Karla Azevedo

    2007-01-01

    Full Text Available O laser de dióxido de carbono atua na inibição da desmineralização do esmalte, reduzindo sua solubilidade aos ácidos e, este efeito pode ser potencializado quando associado a agentes fluoretados. Assim, o objetivo deste trabalho foi descrever as características do laser de CO2, discutir os mecanismos de ação do laser na inibição da desmineralização do esmalte e ainda, revisar a literatura a respeito de seus efeitos quando combinado ao íon flúor

  3. Evaluation of the ocular protection for low intensity therapeutic lasers; Avaliacao da protecao ocular para lasers terapeuticos em baixa intensidade

    Energy Technology Data Exchange (ETDEWEB)

    Cordon, Rosely

    2003-07-01

    The low intensity laser therapy (LILT) has been extensively used in medicine and dentistry presenting positive effects. However, the laser radiation can also cause adverse effects. Due to the ocular focalization property, in the wavelength from 400 to 1400 nm, the retina is more susceptible to damage by radiation than any other part of the human body. Then, the ocular protection is frequently emphasized. This protection must attenuate the radiation to a safe level. The International Electrotechnical Commission (IEC) standard IEC 60825-1 suggests safety requirements for medical laser equipment, including the ocular protection, based on maximum permissible exposure levels. The Brazilian legislation adopts a corresponding IEC standard, the NBR IEC 601.2.22, for safety requirements. The aim of this study was to analyze the adequacy of the ocular protectors furnished by four laser equipment manufacturers, commercially available in Brazil, commonly used for LILT. For this purpose, the laser equipment and the respective ocular protectors were characterized. The adequacy was verified according to the IEC standards. It was found, among other results, ocular protectors attenuating to safe levels the radiation emitted by the respective laser equipment, however, presenting inadequate visual transmission. Inefficient protection and protection indicated in cases where they were not necessary were also observed. (author)

  4. Biomecânica da córnea após laser de femtossegundo na cirurgia de catarata

    Directory of Open Access Journals (Sweden)

    Bruno Freitas Valbon

    2015-10-01

    Full Text Available RESUMO Objetivo: Avaliar as alterações da biomecânica da córnea após laser de femtosegundo na cirurgia de catarata e comparar os parâmetros biomecânicos derivados do Corvis ST (Oculus Corvis ST, Scheimpflug Technology; Wetzlar, Germany entre as técnicas do laser de femtossegundo e a facoemulsificação convencional após a cirurgia de catarata. Métodos: Estudo observacional, prospectivo envolvendo 151 olhos de 127 pacientes com diagnóstico de catarata nuclear. Setenta olhos de 65 pacientes foram submetidos à técnica do laser de femtossegundo (Alcon LenSx, Aliso Viejo,USA e 76 olhos de 62 pacientes por meio da facoemulsificação convencional (Alcon Infinit, Fort Worth, USA. O sistema de tonometria de não contato integrado com a câmera ultrarrápida de Scheimpflug (Oculus Corvis ST, Scheimpflug Technology; Wetzlar, Germany foi utilizado para avaliação da biomecânica da córnea antes e após a cirurgia de catarata pelas técnicas do laser de femtossegundo e a facoemulsificação convencional. Os parâmetros biomecânicos utilizados foram: deformidade de amplitude (DA, pressão intraocular, 1st A time, tempo de concavidade máxima, 2nd A time, 1st A Length, 2nd A Length, raio de curvatura de maior alcance, raio de curvatura normal, velocidade de entrada (Vin e de saída (Vout. A densitometria do cristalino (scattering através do PNS (Pentacam Nucleus Staging foi realizado pela tomografia de córnea e segmento anterior (Pentacam® – Oculus, Wetzlar, Germany em todos os pacientes para diagnóstico objetivo da opacidade do cristalino. Os critérios de exclusão foram: doença corneana, doenças da retina e/ou nervo óptico e cirurgia ocular prévia. O teste de Kolmogorov-Smirnov foi utilizado para avaliar a distribuição normal. O teste de Wilcoxon e o test-T foram utilizados para avaliação entre o pré-operatório e o primeiro dia de pós-operatório (D1 nos grupos do laser de femtossegundo (LFS e do faco convencional (FC

  5. Retinopatia da prematuridade: achados refrativos pós-tratamento com crioterapia ou laser Retinopathy of prematurity: refractive errors in patients treated with cryotherapy or laser

    Directory of Open Access Journals (Sweden)

    Sara Pozzi

    2000-10-01

    Full Text Available Objetivos: Determinar e comparar as características refrativas de uma população composta de crianças pré-termo com retinopatia da prematuridade que necessitaram de tratamento com crioterapia ou laserterapia. Método: Análise dos resultados da refração estática de 14 pacientes (de um total de 761 fichas de crianças que nasceram no Hospital São Paulo da Universidade Federal de São Paulo - Escola Paulista de Medicina, entre janeiro de 1988 e abril de 1998, que completaram um ano de idade e que apresentaram Retinopatia da Prematuridade grau 3 com características de "doença limiar" sendo tratadas com crioterapia ou laserterapia. Foram utilizados os testes estatísticos de Wilcoxon e Mann-Whitney para a avaliação dos resultados. Resultados: 64,3% dos pacientes apresentaram miopia. No grupo de pacientes que receberam tratamento com crioterapia, 80% mostrou miopia, que em todos os casos foi alta; 20% hipermetropia leve, com uma média para o equivalente esférico de --3,10 D no olho direito e --3,25 D no olho esquerdo (diferença entre ambos os olhos estatísticamente não significante. No grupo de laserterapia, 55,6% mostrou miopia, sendo 20 % dos casos miopia alta e 80% miopia leve; 11,1% apresentou-se sem ametropia e 33,3 % com hipermetropia leve. O valor da média para o equivalente esférico foi --0,58 D no olho direito e --0,83D no olho esquerdo (diferença entre ambos os olhos estatisticamente significante. A comparação dos resultados refracionais dos dois grupos mostrou uma maior incidência para miopia alta no grupo de pacientes que receberam tratamento com crioterapia (PPurpose: To examine the spherical equivalent of refractive errors in preterm children with threshold retinopathy of prematurity treated with cryotherapy or laser. Patients and Method: A group of 14 one-year-old children (selected from 761 preterm children born at the Hospital São Paulo of the Universidade Federal de São Paulo between 1988 and 1998 with stage

  6. Evaluation of the morphological alteration of the root surface radiated with a diode laser; Avaliacao da alteracao morfologica da superficie cimentaria irradiada com laser de diodo

    Energy Technology Data Exchange (ETDEWEB)

    Gulin, Mauricio

    2003-07-01

    The diode laser has been studied for periodontal therapy, as much for removal of calculus as for microbial reduction of periodontal pockets, as well as the visible analgesic effects and biomodulation capacity. For this reason the purpose of this study was to evaluate the morphological alteration of the root surface after radiation with the diode laser, 808 nm through analysis by scanning electron microscopy (SEM). Besides this, to verify the temperature variations caused during the radiation, a thermometer put into the dentinal wall of the root canal was used. In all, 18 teeth were used, 15 of which for the SEM study, and the other 3 were used to temperature variation analysis. The 25 samples were scraped on the root surface and planed with manual instruments. The other 5 were not subjected to any type of treatment. This, 6 groups of 5 samples each were formed. Control Group C whose samples had not received any treatment; Control Group C 1 was only scraped and polished conventionally with Hu-Friedy Gracey curettes 5 and 6; the other samples groups L1, L2, L3, L4 were radiated by diode laser using parameters of power 1,0 W; 1,2 W; 1,4 W; and 1,6 W respectively, 2 times for 10 seconds with 20 seconds intervals between each radiation in continuous mode. The results with relation to the increase of temperature in the interior of the root canal demonstrated that there was an increase of more than 5 degree Celsius. The results of the scanning electron microscope analysis of Control Group C demonstrated great irregularity and ridges on the root surface, with the presence of a dentine layer. Control Group C1 presented a similar aspect to Group L 1's, smoother and more homogeneous surface. Groups L2, L3, and L4 presented scratches alternating with smoother areas showing that fiber contacted the surface of the sample. The results reconfirmed the necessity of further studies using diode laser, with a beam of light emitted in an interrupted mode to improve the control of the

  7. Evaluation of the morphological alteration of the root surface radiated with a diode laser; Avaliacao da alteracao morfologica da superficie cimentaria irradiada com laser de diodo

    Energy Technology Data Exchange (ETDEWEB)

    Gulin, Mauricio

    2003-07-01

    The diode laser has been studied for periodontal therapy, as much for removal of calculus as for microbial reduction of periodontal pockets, as well as the visible analgesic effects and biomodulation capacity. For this reason the purpose of this study was to evaluate the morphological alteration of the root surface after radiation with the diode laser, 808 nm through analysis by scanning electron microscopy (SEM). Besides this, to verify the temperature variations caused during the radiation, a thermometer put into the dentinal wall of the root canal was used. In all, 18 teeth were used, 15 of which for the SEM study, and the other 3 were used to temperature variation analysis. The 25 samples were scraped on the root surface and planed with manual instruments. The other 5 were not subjected to any type of treatment. This, 6 groups of 5 samples each were formed. Control Group C whose samples had not received any treatment; Control Group C 1 was only scraped and polished conventionally with Hu-Friedy Gracey curettes 5 and 6; the other samples groups L1, L2, L3, L4 were radiated by diode laser using parameters of power 1,0 W; 1,2 W; 1,4 W; and 1,6 W respectively, 2 times for 10 seconds with 20 seconds intervals between each radiation in continuous mode. The results with relation to the increase of temperature in the interior of the root canal demonstrated that there was an increase of more than 5 degree Celsius. The results of the scanning electron microscope analysis of Control Group C demonstrated great irregularity and ridges on the root surface, with the presence of a dentine layer. Control Group C1 presented a similar aspect to Group L 1's, smoother and more homogeneous surface. Groups L2, L3, and L4 presented scratches alternating with smoother areas showing that fiber contacted the surface of the sample. The results reconfirmed the necessity of further studies using diode laser, with a beam of light emitted in an interrupted mode to improve the control of

  8. Application of gamma irradiation on forming protein-based edible films; Aplicacao da irradiacao na formacao de filmes comestiveis proteicos

    Energy Technology Data Exchange (ETDEWEB)

    Sabato, Susy Frey

    2000-07-01

    In the last decade considerable interest has been addressed to the development of protein-based edible films due to their application in the food industry, as a substitute to traditional plastic films. The use of soy and whey proteins to form those films has been investigated, using heat, chemical and enzymatic processes. Gamma irradiation was recently reported to form caseinate-based edible films, due to the increase of the cohesive strength of the proteins by the formation of cross-links. This work aimed to verify the role of the gamma irradiation in the process of forming edible films from soy protein isolate (SPI) alone and in complex mixtures, that is, mixed with whey protein isolate (WPI), with carbethoxymethyl cellulose (CMC) and with poly(vinyl)alcohol (PVA). Gamma irradiation treatment improved significantly the mechanical properties for all films. The mechanical behavior is strongly related to the formulation, showing synergy between the gamma irradiation and the CMC, mainly for SPI-based films. SPI-based films presented a trend to decrease the water vapor permeability values when irradiated. The CMC addition showed significant improvements on the permeability for films from SPI and from the mixture of SPI with WPI. (author)

  9. Application of gamma irradiation technique for the preservation of propolis; Aplicacao da tecnica de irradiacao gama para preservacao de propolis

    Energy Technology Data Exchange (ETDEWEB)

    Matsuda, Andrea Harumi

    2002-07-01

    Irradiation has been recognized as an efficient method for the reduction of deteriorating and pathogenic microorganisms in foods. Propolis is a resinous product made by bees from material processed by the bee's own metabolism and resins from plants. The aim of this work was the application of gamma irradiation technique for the preservation of propolis, because of its efficiency in the reduction of the microbial load. The changes on the total flavonoids content, phenolic compounds and other characteristics required for the qualification and characterization of Brazilian propolis were also analysed. Propolis samples from Juiz de Fora region, Minas Gerais, were irradiated in a {sup 60}Co source, with doses from 0 to 10kGy for the microbiological analyses and 5.0, 7.0 and 10.0kGy for the physico-chemical analyses. The physico-chemical that have been made were: determination of total flavonoids content, semi-quantitative determination of phenolic compounds (artepelin-C, kempferol, chrysin, galangin and quercetin), dry matter analysis, humidity, ash content, mechanical mass and waxes. The ionizing radiation has shown to be efficient in the reduction of the microbial load. Total coliforms determination showed a great reduction with the dose of 3kGy and concerning mesophile aerobic bacteria a systematic reduction was observed, achieving values <10 UFC/g for the dose of 10kGy; similar results was obtained for molds and yeasts. Salmonella assays were negative for all samples. There was no significant alteration on total flavonoids contents nor on the composition of phenolic compounds as a consequence of radiation application at the assayed conditions. The complementary analyses of dry matter and humidity contents, ashes, mechanical mass and waxes did not shown changes after irradiation even with the maximum dose of 10kGy, remaining the results within the standards required by the Brazilian legislation. (author)

  10. Análise quantitativa da camada de fibras nervosas da retina de cães normais e glaucomatosos através da polarimetria a laser

    Directory of Open Access Journals (Sweden)

    Ana Lucia Braga Martins

    2003-01-01

    Full Text Available As lesões glaucomatosas são progressivas e irreversíveis. Estudos sobre o aparecimento e comportamento desta enfermidade vêm sendo discutidos na oftalmologia em geral. O diagnóstico precoce é de extrema importância para o tratamento e estabilização da mesma. A análise da espessura da camada de fibras nervosas retinianas ''in vivo'' foi proposta na oftalmologia humana, para estabelecer as alterações produzidas pelo glaucoma, e tem demonstrado que tais alterações podem ser detectadas até seis anos antes de alterações de campo visual e aumento de pressão intraocular. Entretanto, na Medicina Veterinária, estes dados carecem de estudo e discussão. Neste experimento foram utilizados dois grupos de cães, com olhos normais e olhos glaucomatosos, que foram submetidos à análise das fibras nervosas retinianas através do Analisador de Fibras Nervosas GDx. Os resultados estatísticos demonstraram que a camada de fibras nervosas dos olhos dos cães glaucomatosos estava mais delgada (p < 0,05 quando comparados aos olhos de cães normais, confirmando a perda de axônios das células ganglionares em olhos de cães com glaucoma.

  11. Evaluation of the permeability of the furcation area of deciduous molars conditioned with Er:YAG laser and cyanoacrylate Avaliação da permeabilidade da região da furca de molares decíduos condicionada com laser de Er:YAG e cianoacrilatos

    Directory of Open Access Journals (Sweden)

    Adriene Mara Souza Lopes-Silva

    2003-09-01

    Full Text Available The purpose of this study was to evaluate in vitro the dentin permeability of the deciduous pulp chamber floor after employing 2-octyl cyanoacrylate and Er:YAG laser. Twenty four deciduous molars were used, divided into four groups. After chemical-surgical preparation each group received a different treatment: Group 1 - control, without treatment; Group 2 - the floor of the pulp chamber was covered with a fine layer of 2-octyl cyanoacrylate; Group 3 - the floor of the pulp chamber was irradiated with Er:YAG laser (250 mJ, 10 Hz for 30 seconds, 80 J of energy and 320 pulses, and covered with a fine layer of 2-octyl cyanoacrylate; and Group 4 - the floor of the pulp chamber was irradiated with Er:YAG laser set at the parameters already described. After that the specimens received application of 0.5% methylene blue, for 15 minutes. The teeth were cut, photographed, and the digitalized images were analyzed using the ImageLab program. The results obtained were submitted to statistical analysis. Group 4 (Er:YAG presented the largest averages in percentage of dye penetration area (19.5%, followed by Group 1 (11.1%, Group 3 (1.4% and Group 2 (0.2%. The experimental model allowed to conclude that the specimens conditioned with 2-octyl cyanoacrylate (Group 2 and Er:YAG laser associated to 2-octyl cyanoacrylate (Group 3 presented a decrease in permeability, and the specimens treated with Er:YAG laser (Group 4 presented an increase in permeability of the analyzed area.A proposta do presente experimento foi avaliar in vitro a permeabilidade da dentina no assoalho da câmara pulpar de dentes decíduos com o emprego do 2-octil cianoacrilato e laser de Er:YAG. Foram empregados 24 molares decíduos, divididos em quatro grupos. Após preparo químico-cirúrgico, cada grupo recebeu um tratamento diferente: Grupo 1 - controle, sem tratamento; Grupo 2 - o assoalho da câmara pulpar foi coberto com uma fina camada de 2-octil cianoacrilato; Grupo 3 - o assoalho da c

  12. Influência da redução medicamentosa da pressão intra-ocular na medida da espessura da camada de fibras nervosas da retina de olhos hipertensos e glaucomatosos pela polarimetria de varredura a laser The influence of intraocular pressure reduction with medication on retinal nerve fiber layer thickness measurements obtained with scanning laser polarimetry in glaucomatous and hypertensive eyes

    Directory of Open Access Journals (Sweden)

    Rodrigo Rezende Gomes Avelino

    2006-10-01

    Full Text Available OBJETIVO: Avaliar o efeito da redução da pressão intra-ocular (PIO obtido com o uso de terapia medicamentosa na espessura da camada de fibras nervosas da retina medida pela polarimetria de varredura a laser (PVL em pacientes glaucomatosos ou hipertensos oculares. MÉTODOS: Trinta e sete olhos de 37 pacientes foram prospectivamente incluídos no estudo e avaliados com a PVL sem uso de medicação ocular hipotensora e num período entre 15 e 30 dias após a instituição de medicação ocular hipotensora, que resultou em redução da PIO de pelo menos 25%. Os parâmetros medidos pela PVL antes e após a redução da PIO foram comparados com o teste t de Student pareado. RESULTADOS: A PIO média dos 37 pacientes diminuiu significativamente de 26,57±4,23 mmHg para 16,54±2,92 mmHg (p0,05. CONCLUSÃO: A redução da PIO com o uso de medicação ocular hipotensora não altera a medida da espessura da camada de fibras nervosas da retina pela PVL em pacientes com glaucoma ou hipertensão ocular.PURPOSE: To evaluate changes in retinal nerve fiber layer thickness as measured by scanning laser polarimetry (SLP after the use of medication to reduce intraocular pressure (IOP in glaucomatous or ocular hypertensive patients. METHODS: The authors prospectively enrolled 37 eyes of 37 patients in whom IOP was reduced by more than 25% after the use of medication. The images were obtained before and 15 to 30 days after the introduction of medication. The SLP parameters measured before and after the use of medication were compared using paired Student's t Test. RESULTS: The mean IOP was significantly reduced from 26.57±4.23 mmHg to 16.54 ±2.92 mmHg after the use of medication (p0.05. CONCLUSION: The retinal nerve fiber layer thickness, as measured by SLP, is not affected by the reduction of IOP with medication in patients with glaucoma or ocular hypertension.

  13. Laser for the treatment of twin to twin transfusion syndrome Laser na terapia da síndrome de transfusão feto-fetal

    Directory of Open Access Journals (Sweden)

    Denise Araújo Lapa Pedreira

    2005-12-01

    Full Text Available PURPOSE: To report the initial experience in our country with a new technique for twin to twin transfusion syndrome (TTTS treatment, using laser to coagulate the placental vessels responsible for the twin transfusion during gestation. METHODS: Prospective study of eight cases diagnosed with TTTS evaluated in our service from january 2001 to june 2005. Through percutaneous introduction of a 2,0mm diameter fetoscope in the uterine cavity, placental surface vessels where directly visualized. Those identified as responsible for the transfusion were laser coagulated. The procedure combines ultrasonography and fetoscopy, in a so-called sonoendoscopic technique (FETENDO. RESULTS: Among the eight pregnancies evaluated, five cases were submitted to the procedure (10 fetuses. All fetuses survived for at least five weeks after surgery. A total of eight fetuses were born alive and five survived the neonatal period. In a 18 months follow-up after birth, all five are still alive and well and their mean age is now 10,6 months. The total survival rate was 50% and in three pregnancies, at least one fetus survived. CONCLUSIONS: Laser fetoscopy is actually the "gold-standard" treatment of TTTS. Nevertheless is a sophisticated technique that epends of proper training. Our service is the first in our country to offer this therapeutic technique. Our success rate is comparable with the international literature.OBJETIVO: Nosso objetivo é relatar a experiência inicial no país com uma nova técnica de tratamento para a síndrome de transfusão feto-fetal (STT, onde se utiliza o raio laser para coagulação dos vasos placentários responsáveis pela transfusão entre gêmeos durante a gravidez. MÉTODOS: Estudo prospectivo de 8 casos com diagnóstico de STT avaliados pelo nosso serviço de janeiro de 2001 a junho de 2005. Introduzindo-se um fetoscópio de 2,0 mm de diâmetro na cavidade uterina, por via percutânea, foram diretamente visualizados os vasos da superf

  14. Influence of the incidence angle on the morphology of enamel and dentin under Er:YAG laser irradiation; Estudo da influencia da angulacao do feixe laser na morfologia de esmalte e dentina irradiados com laser de Er:YAG

    Energy Technology Data Exchange (ETDEWEB)

    Junqueira Junior, Duilio Naves

    2002-07-01

    The purpose of this study is to make an in vitro evaluation, using scanning electron microscopy, of the influence of the laser beam irradiation angle on the enamel and dentin morphology. These tissues were both irradiated by Er:YAG Laser, with the same energy parameter. Twenty-four incisive bovine teeth were used, separated in eight groups, four of enamel, and four of dentin, with three specimens in each group. Each specimen was submitted to three laser applications, varying the incidence angle, between the laser and the tooth surface, at 90, 50 and 20 degrees. The applied frequency was 2 Hz, with 20 pulses in each application. The KaVo Key Laser 3 was employed, wavelength at 2940 nm, adjustable energy from 40 to 600 mJ and repetition rate from 1 to 25 Hz. The groups were distributed according to the energy parameter as follows - enamel: 250 mJ; 300 mJ; 350 mJ and 400 mJ; dentin: 200 mJ; 250 mJ; 300 mJ and 350 mJ. The results evidenced the Laser incidence angle importance; it is an essential parameter in the protocol of utilization and it should not be disregarded. The observations of this study allow to conclude that the Laser incidence angle has direct influence on the morphological aspect of the alterations produced in enamel and dentin. (author)

  15. Estudo experimental da aplicação retiniana do laser infravermelho via transescleral sob condições de baixa visibilidade Transscleral infrared laser retinal photocoagulation experimental study under low visibility conditions

    Directory of Open Access Journals (Sweden)

    Dario Grechi Goulart

    2008-06-01

    Full Text Available OBJETIVOS: Pesquisa experimental, com laser de diodo infravermelho, para estimar a segurança, a reprodutibilidade e a permeabilidade da parede ocular à sua atuação clínica, quando aplicado via transescleral, em condições de baixa visibilidade. MÉTODOS: Submetemos olhos de coelhos pigmentados da raça Nova Zelândia à fotocoagulação retiniana por laser de diodo infravermelho. No olho direito, realizamos fotocoagulação via transescleral sob parâmetros de potência e tempo pré-determinados clinicamente. No olho esquerdo, foram repetidos os mesmos valores da potência e tempo usados no olho direito, desta vez, via transpupilar. Imediatamente e após 2 meses, estudos clínicos baseados na retinografia e histopatológicos foram realizados. RESULTADOS: A permeabilidade da parede ocular, quando da aplicação do laser de diodo infravermelho via transescleral, variou entre 58,95 e 63,87%. A média da permeabilidade da parede ocular a 300 mW (63,14% mostrou-se significativamente superior àquela da permeabilidade da parede ocular encontrada a 500 mW (59,11%, (PPURPOSE: Retinal photocoagulation under poor visualization condition is often required. Transscleral infrared laser can be used as an alternative to regular transpupillary treatment. Based upon retinographic measurements, we proposed to estimate the reproducibility as well as ocular wall permeability rate for this treatment. Our primary goal was to evaluate whether this technique can deliver adequate photocoagulation at predetermined parameters without direct retinal visualization. METHODS: In New Zealand pigmented rabbits, optimal transscleral infrared diode laser settings were administered to the right eye. With the same parameters, transpupillary photocoagulation was repeated in the left eye. Retinographic and clinical examinations were performed immediately and two months later. RESULTS: Ocular wall permeability rate varied between 58.95 and 63.87%. Average permeability using a

  16. Análise da dose do laser de baixa potência em equipamentos nacionais Analysis of low-level laser therapy doses in Brazilian equipment

    Directory of Open Access Journals (Sweden)

    TY Fukuda

    2008-02-01

    Full Text Available CONTEXTUALIZAÇÃO: A laserterapia de baixa potência vem sendo cada vez mais utilizada, e o crescente interesse por seus efeitos relaciona-se com a grande quantidade de publicações científicas. Muitos terapeutas e pesquisadores têm-se baseado na definição da dose do laser pela densidade energética (deltaE; porém, a grande variedade de equipamentos de laser pode levar a diferença nos resultados terapêuticos encontrados, por fornecerem parâmetros que variam de acordo com o fabricante. OBJETIVO: Analisar a energia final transmitida ao tecido ao aplicar-se a mesma deltaE em equipamentos de diferentes marcas nacionais. MATERIAIS E MÉTODOS: Foram avaliados sete equipamentos nacionais, com potência média (Pm diferentes, e foram realizadas simulações aplicando deltaE de 1J/cm² em cada aparelho, para avaliar possíveis diferenças na energia final. RESULTADOS: A mesmadeltaE aplicada em diferentes aparelhos nacionais forneceu energia final que variou entre 10 e 90mJ. Esta variação na energia deveu-se principalmente a diferenças na Pm, sendo encontrados valores entre 5,4 e 75mW. CONCLUSÃO: Esta variabilidade na energia final, que é transmitida ao tecido, indica que a deltaE parece não ser o parâmetro que melhor descreve a dose a ser utilizada. É preciso mencionar não só a deltaE, mas também a energia final, para que se possa estabelecer a dose para obtenção do melhor resultado terapêutico.INTRODUCTION: Low-level laser therapy is becoming more popular and there is a growing interest in its effects, as reflected in the increased number of articles published about the subject. Many therapists and researchers have used a laser dose definition based on energy density (deltaE. However, the variety of laser equipments may lead to differences in the therapeutic results found, since the parameters supplied by these equipments vary according to the manufacturer. OBJECTIVE: To analyze the final energy transmitted to the tissue when

  17. Efeito da Convecção no Humor Vítreo Sobre o Dano Térmico de um Melonoma de Coroide Durante Teremoterapia Transpupilar a Laser

    OpenAIRE

    Garcia, Olga Pinheira

    2015-01-01

    O estudo da distribuição de temperaturas no olho humano é capaz de fornecer subsídios para tratamentos hipertérmicos e para o cálculo dos danos causados pela exposição à radiação de uma fonte de laser. Um exemplo é a termoterapia transpupilar a laser (TTT), aplicada no tratamento de um melanoma de coroide. Neste trabalho, foi desenvolvido, através do software comercial SolidWorks®, um modelo tridimensional do olho humano portador de um melanoma de coroide, utilizado para simula...

  18. Lasers

    CERN Document Server

    Milonni, Peter W

    1988-01-01

    A comprehensive introduction to the operating principles and applications of lasers. Explains basic principles, including the necessary elements of classical and quantum physics. Provides concise discussions of various laser types including gas, solid state, semiconductor, and free electron lasers, as well as of laser resonators, diffraction, optical coherence, and many applications including holography, phase conjugation, wave mixing, and nonlinear optics. Incorporates many intuitive explanations and practical examples. Discussions are self-contained in a consistent notation and in a style that should appeal to physicists, chemists, optical scientists and engineers.

  19. Conhecimento das propriedades físicas e da interação do laser com os tecidos biológicos na odontologia Knowledge of the physical properties and interaction of laser with biological tissue in dentistry

    Directory of Open Access Journals (Sweden)

    Thiago Maciel Cavalcanti

    2011-10-01

    Full Text Available A tendência da odontologia é a incorporação de métodos menos invasivos com a finalidade de minimizar a dor e o desconforto durante e após as intervenções odontológicas. Por isso, acredita-se que a laserterapia seja uma excelente opção de tratamento, já que apresenta efeitos benéficos para os tecidos irradiados, como ativação da microcirculação, produção de novos capilares, efeitos anti-inflamatórios e analgésicos, além de estímulo ao crescimento e à regeneração celular. O entendimento da interação entre os lasers e os tecidos baseia-se principalmente no entendimento das reações que podem ser induzidas nesses tecidos pela luz laser. Este trabalho se propõe a mostrar a relevância do conhecimento das propriedades físicas do laser, bem como sua interação com os tecidos biológicos, considerando que os efeitos e os mecanismos de ação da luz laser são complexos e alvos de inúmeras pesquisas com vistas a um melhor delineamento de suas formas de aplicação e indicações.The trend in dentistry is to incorporate less invasive methods to minimize pain and discomfort during and after dental intervention. Therefore, it is believed that laser therapy is an excellent treatment option, since it has beneficial effects for the irradiated tissues, such as activation of microcirculation, production of new capillaries, inflammatory and analgesic effects, in addition to stimulation of growth and cell regeneration. The comprehension of the interaction between lasers and tissue is based mainly on understanding the reactions that can be induced in those tissues by laser. This work intends to show how important it is to know the physical properties of laser as well as its interactions with biological tissues, since its effects and mechanisms of action are complex and are the object of various studies to better understand its forms of application and indications.

  20. Efetividade da fluorescência a laser no diagnóstico de lesões de cárie. Estudos in vitro e in vivo

    OpenAIRE

    Diniz, Michele Baffi [UNESP

    2006-01-01

    O objetivo do presente estudo foi avaliar a efetividade da fluorescência a laser (KaVo DIAGNOdent) para a determinação da severidade de lesões de cárie oclusal em dentes permanentes in vivo e para determinação da remineralização in vitro de lesões de cárie induzidas artificialmente em esmalte de dentes bovinos. No estudo in vitro, 78 blocos de esmalte com lesões de cárie artificial (mancha branca) com valores de dureza Vickers de 38,48 l 0,85 foram submetidos ao tratamento com dentifrício flu...

  1. Reprodutibilidade do exame de medida da camada de fibras nervosas da retina por meio da polarimetria de varredura a laser Reproducibility of retinal nerve fiber layer measurement by scanning laser polarimetry

    Directory of Open Access Journals (Sweden)

    Fernanda Bon Duarte

    1999-10-01

    Full Text Available Objetivo: Analisar a reprodutibilidade das medidas da espessura da camada de fibras nervosas da retina intra e inter-observador. Material e Métodos: As medidas da camada de fibras nervosas foram realizadas em 26 olhos normais por três examinadores diferentes, os quais tomaram três imagens de cada olho. Com base nestas imagens foi executada a média das imagens pelo programa do aparelho. A cada examinador foi solicitado que escolhesse a melhor imagem para cada exame. Foram analisados os resultados obtidos com a melhor imagem, bem como os da média das imagens. Foi calculada a média da espessura da camada de fibras nervosas nas regiões superior, nasal, temporal e inferior e suas relações. Determinou-se a reprodutibilidade nestas circunstâncias tanto inter como intra-observador por meio de teste de análise de variância por postos de Friedman. Resultados: Na análise intra-observador houve ótima reprodutibilidade do exame. Para o examinador G (glaucomatólogo os valores de p foram os seguintes: região superior = 0,48; inferior = 0,89; temporal = 0,30 e nasal = 0,89. Para o examinador R (residente os valores de p foram os seguintes: região superior = 0,89; inferior = 0,24; temporal = 0,89 e nasal = 0,30 e para o examinador T (tecnóloga os valores de p foram os seguintes: região superior = 0,76; inferior = 0,70; temporal = 0,22 e nasal = 0,63. Na análise inter-observador, não foi observada diferença estatisticamente significante das variáveis isoladas considerando-se a média das imagens (p superior = 0,52; inferior = 0,37; temporal = 0,43 e nasal = 0,52. Considerando-se as relações entre as regiões temos que apenas a relação S/I mostrou diferença estatisticamente significante. As demais relações: S/T, S/N, I/T, I/N e T/N não mostraram diferença estatisticamente significante. Para a melhor imagem observou-se diferença estatisticamente significante entre os três examinadores para as variáveis superior/temporal (p = 0

  2. Effect of irradiation gamma to reduction colony counting-units in Jerked Beef; Efeito da irradiacao gama na reducao da carga microbiana em Jerked Beef

    Energy Technology Data Exchange (ETDEWEB)

    Silva, M.A.; Solidonio, E.G.; Vicalvi, M.C.V.; Colaco, W., E-mail: evelyne_solidonio@yahoo.com.br [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil). Departamento de Energia Nuclear. Lab. de Microbiologia do Solo; Silva, G.R.; Sena, K.X.R.F. [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil). Departamento de Antibioticos. Lab. de Farmacos e Estudos Antimicrobianos

    2013-08-15

    The increasing meat production triggered the need to develop preservation techniques, and between them salting is the most common. From the twentieth century another method of conservation was now being applied irradiation, treatment terminal used in the packaged product. The most salted meat consumed in Brazil is the Jerked Beef that differs to Jerky from that having higher moisture content and ripening faster. The objective of this study was to determine by counting colonies, the effectiveness of irradiation in reducing to the colony-forming units per grams (CFU/g). Three batches were obtained with three samples weighing 500g each. Under sterile conditions, the meat was cut and weighed generating sub-samples which were assigned to the control group and the radiation source for irradiating with cobalt-60 (dose rate 6,619 kGy/h). We used doses of 2, 4 and 6 kGy. The sub-samples were added to an Erlenmeyer with sterile distilled water, and were left to stand having forming a water desalting. Aliquots of these waters were plated and incubated. The results were for the control group ranged from 5.0x10{sup 5} to 5.0x10{sup 16} CFU /g, at a dosage of 2kGy was 1.7x10{sup 5} to 1.1x10{sup 12} CFU /g, at a dosage of 4kGy 0 to 9.0x10{sup 10} CFU/g and the dose of from 6kGy was 0 to 1.3x10{sup 5} CFU /g. In the final analysis it was found that all lots were presented contamination upon which would be allowed in the order of 5.0x10{sup 3}.For the reducing CFU/g the doses 4kGy and 6kGy were the most effective. (author)

  3. Efeitos da aplicação do L.A.S.E.R. HeNe e do ultravioleta B no vitiligo

    Directory of Open Access Journals (Sweden)

    Ana Carolina Brandt de Macedo

    Full Text Available INTRODUÇÃO: O vitiligo é uma doença crônica despigmentante da pele, ocasionada pela perda funcional dos melanócitos da epiderme. Este estudo teve como objetivo comparar os efeitos da aplicação do L.A.S.E.R. HeNe e do ultravioleta B em pacientes com vitiligo. MÉTODO: Foram selecionados 22 pacientes (11 mulheres e 11 homens, com idade entre 12 e 60 anos (31,68 ± 16,29. Os pacientes foram distribuídos aleatoriamente, de acordo com a ordem de comparecimento no serviço e foram divididos randomicamente em dois grupos: o grupo A (n = 12, submetido à aplicação do L.A.S.E.R. HeNe, para o qual a técnica utilizada foi a pontual com aproximadamente 3 cm de distância entre cada ponto, perpendicularmente à pele, e o grupo B (n = 10, exposto ao Ultravioleta B, aplicado de forma perpendicular com 10 cm de afastamento da pele do paciente. Para mensuração da área tratada, utilizou-se o programa AUTOCAD 2002, no qual foi delimitada a borda da mácula em fotos tiradas no início e no fim do tratamento. RESULTADOS: Inicialmente, no grupo A, a área era de 4,87 cm² ± 3,70 e, após a aplicação, foi de 4,15 cm² ± 2,89, com diferença média de 0,72 cm² (1,89. No grupo B, verificou-se que antes da aplicação a média era de 5,36 cm² ± 6,36 e, a após a aplicação, foi de 4,43 cm² ± 5,17, com diferença média de 0,92 cm² ± 1,29. CONCLUSÃO: Ambos os aparelhos obtiveram resultados significativos na redução da mácula, com maior redução no grupo da ultravioleta.

  4. Clinical evaluation of the immediate effectiveness of GaAIAs laser on the therapy of dentin hypersensitivity Avaliação clínica da eficácia imediata do laser de GaAIAs na terapia da sensibilidade dentinária

    Directory of Open Access Journals (Sweden)

    Márcia Sepúlveda Noya

    2004-12-01

    Full Text Available The aim of the present study was to determine the effectiveness of GaAlAs laser therapy with lambda670nm laser on the treatment of dentin hypersensitivity. Thirty-two intact human teeth were evaluated, the sensitivity of which to thermal (cold water, mechanical (probe and evaporative (air stimuli was recorded before and immediately after irradiation. Whenever desensitization was not observed after the first application, the patient was scheduled for a maximum of three further applications at 4-day intervals. The results demonstrated that laser therapy yielded a statistically significant reduction (pO objetivo deste trabalho foi realizar um estudo clinico para avaliar a eficácia da laserterapia com laser de lambda670nm no tratamento da sensibilidade dentinária. Foram avaliados 32 dentes íntegros cuja sensibilidade a estímulo térmico, tátil e evaporativo foi registrada antes e após irradiação. Quando não era evidenciada dessensibilização após a primeira sessão de irradiação, o paciente era agendado para novas aplicações, máximo de três sessões, sempre com intervalos de quatro dias. De acordo com os resultados a laserterapia promoveu uma redução estatisticamente significante (p< 0,05 da sensibilidade dentinária para os três estímulos analisados. De acordo com os resultados obtidos com a utilização do laser de GaAlAs foi necessária apenas uma sessão terapêutica para os estímulos sonda e térmico, embora tenham sido necessárias duas sessões para conseguir-se redução da sensibilidade ao estímulo evaporativo.

  5. Padronização e caracterização da tecnologia laser em borracha EPDM para o design de joias contemporâneas

    Directory of Open Access Journals (Sweden)

    Mariana Kuhl Cidade

    2016-12-01

    Full Text Available Esta pesquisa trata da geração de referência de padronização na utilização da tecnologia de corte a laser CO2 em borracha EPDM, através do desenvolvimento de joias contemporâneas. Foram conduzidos diversos testes de aplicação de velocidades e número de passadas de feixe laser a fim de determinar a configuração ideal para utilização deste processo no material. Imagens analisadas via MEV auxiliaram a compreensão dos efeitos do feixe laser no elastômero, como a zona de abrangência térmica e a efetividade do corte. Com a melhor definição de corte para um traço uniforme, essa caracterização objetiva auxiliar estudantes, profissionais e indústrias na execução de seus projetos.

  6. Uso combinado da laserterapia de baixa potência e da inibição da ciclooxigenase-2 na reepitelização de ferida incisional em pele de camundongos: um estudo pré-clínico Combined use of low level laser therapy and cyclooxygenase-2 selective inhibition on skin incisional wound reepithelialization in mice: a preclinical study

    Directory of Open Access Journals (Sweden)

    Cíntia Helena Santuzzi

    2011-04-01

    Full Text Available FUNDAMENTOS: A laserterapia de baixa potência e os inibidores seletivos da ciclooxigenase-2 (ICOX2 vem sendo muito utilizados para modular a resposta inflamatória, entretanto, os seus efeitos na reepitelização de feridas não são bem compreendidos. OBJETIVO: Avaliar os efeitos isolados e combinados da laserterapia de baixa potência e da ICOX2 na reepitelização de ferida incisional na pele de camundongos. MÉTODO: Foi induzida uma ferida de 1 cm no dorso de cada camundongo, que foram divididos em quatro grupos (N=20: Controle, Laserterapia, Tratados com celecoxib e Terapia conjugada. Os animais dos grupos celecoxib e Terapia conjugada foram tratados com celecoxib por 10 dias antes da incisão cutânea. As feridas experimentais foram irradiadas com laserterapia de baixa potência He-Ne (632nm, dose: 4J/cm2 em varredura, por 12 segundos durante três dias consecutivos nos grupos Laserterapia e Terapia conjugada. Os animais foram sacrificados no 3º dia de pós-operatório. Amostras das feridas foram coletadas e coradas (Tricromio de Masson para análise histomorfométrica. RESULTADOS: Tanto o grupo Laserterapia, quanto o grupo celecoxib, mostrou aumento da reepitelização cutânea em relação ao grupo Controle, entretanto, o grupo Terapia conjugada não apresentou diferenças. Quanto à queratinização o grupo Laserterapia e Terapia conjugada apresentaram redução dos queratinócitos, comparados com o grupo Controle. CONCLUSÕES: Os resultados mostram que o uso da laserterapia de baixa potência e da ICOX2 isoladamente aumentam as células epiteliais, mas somente a laserterapia de baixa potência reduziu os queratinócitos cutâneos. O tratamento conjugado restabelece a reepitelização inata e dimunui a queratinização, embora ocorra uma acelerada contração da ferida com melhora na organização da ferida na pele de camundongos.BACKGROUND: Low level laser therapy and cyclooxygenase-2 (ICOX2 selective inhibitors have been widely used

  7. Influência da texturização laser na vida de ferramentas de torneamento revestidas por CVD e PVD

    OpenAIRE

    Davi Neves

    2010-01-01

    Resumo: Uma característica dos revestimentos aplicados nas ferramentas de corte é a adesão. A adesão deficiente libera particulados duros e abrasivos resultantes da fragmentação prematura do revestimento, acelerando o desgaste das superfícies em contato. Na texturização, um laser de pulsos curtos e de alta frequência provoca, na interação com a superfície, uma mudança das propriedades advinda da fusão e ablação de material. Neste processo podem ocorrer a limpeza e a texturização simultâneas d...

  8. Análise da eficácia do laser de baixa potência no tratamento da dor tendínea em ratos imunossuprimidos Analysis of low-level laser therapy efficacy on tendon pain treatment in immunosuppressed rats

    Directory of Open Access Journals (Sweden)

    Fernanda de Oliveira Busarello

    2011-12-01

    Full Text Available O comprometimento do sistema imune, que pode ser apresentado por indivíduos com doenças crônicas, leva à baixa resposta imunológica. Um dos tratamentos utilizados para lesões agudas em tendões é o laser de baixa potência, contudo há uma lacuna em relação ao seu uso em imunodepressão. O objetivo do presente estudo foi analisar se o laser de baixa potência é eficaz para o tratamento da dor em ratos imunodeprimidos submetidos a trauma tendíneo. Foram utilizados 23 ratos, machos, da linhagem Wistar, divididos aleatoriamente em três grupos: grupo controle, placebo e laser. Os animais foram imunodeprimidos (por administração de Ciclosporina A e submetidos à lesão no tendão calcâneo direito, com impacto de cerca de 0,40 J. Para o tratamento, utilizou-se laser de baixa potência, 670 nm, 30 mW e dose de 2 J/cm², durante 3 dias. A avaliação da dor foi realizada pelo teste de incapacidade funcional e por filamento de Von Frey digital. Os resultados apresentaram valores significativos para o grupo laser, com diminuição de dor funcional e da dor à pressão na superfície plantar e no local lesionado (tendão calcâneo direito. Portanto, concluiu-se que o laser de baixa potência é eficaz para reduzir a dor em ratos imunodeprimidos submetidos a trauma tendíneo.The commitment of immune system, which may be presented by individuals with chronic diseases, leading to a low immune response. One of the treatments used for acute injuries in tendons is the low-power laser, however there is a gap in relation to its use in immunosuppression. The objective of this study was to analyze if low-level laser therapy is effective for the treatment of pain in immunosuppressed rats subjected to trauma tendon. We used 23 male rats of Wistar strain, divided randomly in three groups: control group, placebo and laser. The animals were immunosuppressed (by administration of Cyclosporin A and underwent right Achilles tendon injury, with impact of about

  9. Laser diagnostic and therapy of dental caries: the clinic point of view; Laser diagnostico e tratamento da carie dental: uma visao clinica

    Energy Technology Data Exchange (ETDEWEB)

    Paiva, Priscila Faria

    2001-07-01

    Dental caries's diagnosis is a major dentistry problem from the clinic point of view. The laser beam on the region of 655 nm induces the fluorescence of the compounds present in the hard tissue, quantifying differences between sound and carious enamel and dentine. Diagnodent (Kavo, Germany), showed to be effective regarding dental caries's diagnosis in the present research sampling. The Er:YAG laser (Kavo Key Laser 2, Germany) performed efficient cavity preparations in caries lesions of I and V class type, using up energies that ranged from 300 mJ to 350 mJ with 4 Hz repetition rate for the enamel; and from 250 mJ to 300 mJ with 4 Hz repetition rate for the dentine, and with 80 mJ with 6 Hz of repetition rate for laser conditioning. In the Er:YAG laser preparations no patient was anesthetized even when there were deeper cavities, and the maximum degree of pain ( which ranged from 0 to 10) was 4. In the control group with conventional high-speed drill two patients were anesthetized and the maximum degree of pain was 7. Restorations performed by conventional method of composite were equally satisfying both in caries groups of I and V class type and in the control group. The laser application in the operative dentistry office as a new method of diagnosis and dental preparations should be a good alternative to the use of the conventional dental drill. Nevertheless, dentistry practice has a lot to improve from technology progress, as well as new researches on laser dentistry are necessary in a long term. New types of lasers will come about and will increasingly improve the dental practice assistance and procedures quality. (author)

  10. Laser diagnostic and therapy of dental caries: the clinic point of view; Laser diagnostico e tratamento da carie dental: uma visao clinica

    Energy Technology Data Exchange (ETDEWEB)

    Paiva, Priscila Faria

    2001-07-01

    Dental caries's diagnosis is a major dentistry problem from the clinic point of view. The laser beam on the region of 655 nm induces the fluorescence of the compounds present in the hard tissue, quantifying differences between sound and carious enamel and dentine. Diagnodent (Kavo, Germany), showed to be effective regarding dental caries's diagnosis in the present research sampling. The Er:YAG laser (Kavo Key Laser 2, Germany) performed efficient cavity preparations in caries lesions of I and V class type, using up energies that ranged from 300 mJ to 350 mJ with 4 Hz repetition rate for the enamel; and from 250 mJ to 300 mJ with 4 Hz repetition rate for the dentine, and with 80 mJ with 6 Hz of repetition rate for laser conditioning. In the Er:YAG laser preparations no patient was anesthetized even when there were deeper cavities, and the maximum degree of pain ( which ranged from 0 to 10) was 4. In the control group with conventional high-speed drill two patients were anesthetized and the maximum degree of pain was 7. Restorations performed by conventional method of composite were equally satisfying both in caries groups of I and V class type and in the control group. The laser application in the operative dentistry office as a new method of diagnosis and dental preparations should be a good alternative to the use of the conventional dental drill. Nevertheless, dentistry practice has a lot to improve from technology progress, as well as new researches on laser dentistry are necessary in a long term. New types of lasers will come about and will increasingly improve the dental practice assistance and procedures quality. (author)

  11. Effect of diode laser irradiation on the apical sealing of MTA retrofillings Efeito da irradiação de laser de diodo no selamento apical em retrobturações com MTA

    Directory of Open Access Journals (Sweden)

    Eliana Barbosa de Souza

    2006-09-01

    Full Text Available Apical sealing is essential for the success of paraendodontic surgery, so any procedure that may favor an adequate sealing of the apical remainder should be performed. The purpose of this study was to evaluate the influence of diode laser irradiation on the apical sealing of root-end cavities with MTA retrofillings. Root canals in twenty extracted human teeth were shaped with K-files and filled with gutta-percha. The apexes were cut off and root-end preparations were performed. The roots were divided randomly in 2 groups. Group 1 (ten specimens was retrofilled with MTA. Group 2 was irradiated with diode laser, with 1 W for 20 seconds, on the apical surface and root end cavity before retrofilling with MTA. The specimens had their external surfaces impermeabilized with cyanoacrylate, except for the apical surface, and were then immersed in 1% rhodamine B dye for 72 h and placed in plaster stone. After that, the specimens were submitted to longitudinal abrasion until half of the root remained. The linear dye leakage was observed in these mid-roots between the root canal wall and retrofilling. The linear dye leakage was measured with Image Lab software, and the results were statistically analyzed with Student's t test. There were no statistically significant differences between the two groups (p > 0.05. The diode laser irradiation did not improve the apical sealing of MTA retrofillings under the conditions of this in vitro study.O selamento apical é fundamental para o sucesso da cirurgia parendodôntica. Assim, procedimentos que melhorem o selamento do remanescente apical devem ser utilizados. O objetivo deste estudo foi verificar se a irradiação de laser de diodo poderia aumentar o selamento apical em cavidades retrógradas obturadas com MTA. Foram utilizadas 20 raízes de dentes humanos extraídos que, após preparo com lima tipo K, tiveram seus canais obturados com guta-percha. Os ápices foram cortados e sofreram preparo de cavidades retr

  12. Bartholin's gland cysts: management with carbon-dioxide laser vaporization Cistos da glândula de Bartholin: tratamento com vaporização laser com CO2

    Directory of Open Access Journals (Sweden)

    Ana Cristina Neves Figueiredo

    2012-12-01

    Full Text Available PURPOSE: To evaluate the effectiveness, recurrence rate, and complications of carbon-dioxide laser vaporization in the treatment of Bartholin's gland cysts. METHODS: A retrospective study including 127 patients with symptomatic Bartholin' gland cysts submitted to carbon-dioxide laser vaporization at our institution from January 2005 to June 2011. Patients with Bartholin's gland abscesses and those suspected of having neoplasia were excluded. All procedures were performed in an outpatient setting under local anaesthesia. Clinical records were reviewed for demographic characteristics, anatomic parameters, intraoperative and postoperative complications, and follow-up data. Data were stored and analyzed in Microsoft Excel® 2007 software. A descriptive statistical analysis was performed, and its results were expressed as frequency (percentage or mean±standard deviation. Complication, recurrence, and cure rates were calculated. RESULTS: The mean age of the patients was 37.3±9.5 years-old (range from 18 to 61 years-old. Seventy percent (n=85 of them were multiparous. The most common symptom was pain and 47.2% (n=60 of patients had a history of previous medical and/or surgical treatment for Bartholin's gland abscesses. Mean cyst size was 2.7±0.9 cm. There were three (2.4% cases of minor intraoperative bleeding. Overall, there were 17 (13.4% recurrences within a mean of 14.6 months (range from 1 to 56 months: ten Bartholin's gland abscesses and seven recurrent cysts requiring reintervention. The cure rate after single laser treatment was 86.6%. Among the five patients with recurrent disease that had a second laser procedure, the cure rate was 100%. CONCLUSIONS: At this institution, carbon-dioxide laser vaporization seems to be a safe and effective procedure for the treatment of Bartholin's gland cysts.OBJETIVO: Avaliar a eficácia, a taxa de recorrência e as complicações da vaporização laser com CO2 no tratamento dos cistos da glândula de

  13. Efeitos da radiação laser de dióxido de carbono em tecido ósseo: estudo macroscópico em ratos Effect of carbon dioxide laser radiation on osseous tissue: macroscopic study in rats

    Directory of Open Access Journals (Sweden)

    Walter NICCOLI-FILHO

    2001-06-01

    Full Text Available O laser de dióxido de carbono (CO2, pelas suas propriedades intrínsecas, tem se tornado um instrumento cirúrgico importante; entre estas podemos citar: hemostasia, redução do edema e da dor pós-operatória e esterilização do campo cirúrgico. Seu uso em tecido ósseo para realização de osteotomias ainda é questionável, principalmente devido à possibilidade de iatrogenias causadas pelo aumento da temperatura tecidual, bem como destes efeitos na área paraincisional. O propósito deste estudo foi proporcionar a confecção de um plano piloto visando analisar macroscopicamente os efeitos da radiação laser de CO2 em tíbia de rato a fim de estabelecerem-se parâmetros de segurança quanto a potência. Foram utilizados 12 ratos. Após anestesia, os ossos foram submetidos a radiação com potência de 1, 3 e 5 watts. Os animais foram sacrificados nos tempos imediatamente após, 3, 7 e 14 dias após a irradiação, visando à remoção do osso tratado. Os espécimes obtidos foram observados através de lupa estereoscópica com aumentos de 14, 25 e 40 vezes e fotografados para posterior análise. Os resultados permitiram concluir que a potência de 1 watt proporciona uma melhor qualidade de resposta à reparação e que as potências de 3 e 5 watts provocaram o atraso na cronologia de reparo.The use of CO2 laser in osseous tissue to execute osteotomies is still questionable, mainly due to the increase of temperature in the site of irradiation. The purpose of this research was to carry out a pilot study in order to analyze macroscopically the effect of CO2 laser irradiation on rat tibia and to establish security parameters regarding power. Twelve rats were submitted to irradiation with 1, 3 and 5 watts of power and were examined immediately, 3, 7 and 14 days after irradiation. The results showed better healing when irradiation was carried out with the power of 1 watt; the 3- and 5-watt powers caused delay in the chronology of healing.

  14. In vitro study of temperature changes in root during Er:YAG laser application; Estudo in vitro da alteracao da temperatura durante a aplicacao do Er:YAG laser intracanal

    Energy Technology Data Exchange (ETDEWEB)

    Brandao, Redson Vilela

    2001-07-01

    The temperature increase in root dentine irradiated by Er:YAG laser beam was analyzed, for different dentine thickness and different energy and frequency conditions, aiming the evaluation of Er:YAG laser in endodontic therapy, without causing any damages to close tissues. Twenty four human teeth were separated in four groups with six teeth each, and longitudinally sectioned in thickness of 0.5 mm (first group), 1,0 mm (second group), 1,5 mm (third group) and 2,0 mm (fourth group). Those samples were irradiated with the Er:YAG laser, emitting at the wavelength of 2.94{mu}m, by using a sapphire optic fiber with diameter of 0.375 mm, and forming an angle of 5 deg with the irradiated dentine surface. Three different laser energies were used in this study, 180 mJ, 160 mJ and 140 mJ, with frequencies of 10 Hz and 15 Hz. The temperature data were collected in a digital-analog system and sent to a computer for analysis. It was verified that the time for temperature increases of 5 deg in the external root walls varies according to the laser energy, repetition rate and dentine root thickness. Thus, in this work we could obtain laser parameters to avoid thermal damages in periodontal tissues. (author)

  15. Influência da irradiação do laser na regeneração nervosa em diferentes locais de tratamento Influence of laser radiation in nerve regeneration in different treatment sites

    Directory of Open Access Journals (Sweden)

    Fausto Fernandes de Almeida Sousa

    2009-01-01

    Full Text Available OBJETIVO: Verificar a influência do laser de baixa intensidade de AsGaAl na lesão por esmagamento do nervo peroneiro de ratos através da avaliação funcional da marcha nos diferentes locais de irradiação. MÉTODOS: Foram utilizados 53 ratos, divididos em seis grupos: normal, lesado não tratado, lesado e tratado placebo, lesado e tratado na medula, lesado e tratado no nervo, lesado e tratado em ambos (nervo e medula. O esmagamento do nervo peroneiro foi realizado por meio de uma pinça e subsequente tratado com laser por 28 dias consecutivos. Na avaliação funcional foram analisadas as impressões das pegadas, registradas pela câmera de vídeo em uma passarela de acrílico, no pré-operatório e aos 14º, 21º e 28º dias de pós-operatório, e avaliadas na fórmula PFI por meio do software. RESULTADOS: Na avaliação funcional da marcha foram encontradas diferenças significantes somente no 14º dia de pós-operatório. CONCLUSÃO: A irradiação do laser AsGaAl de baixa intensidade foi capaz de acelerar e potencializar o processo de regeneração nervosa periférica de ratos no 14º dia de pós-operatório, de acordo com a avaliação funcional da marcha, tanto para o grupo tratado na medula quanto para o grupo tratado no nervo.OBJECTIVE: This study seeks to determine, through functional gait assessment in different irradiation sites, the influence of a low-intensity GaAsAl laser beam on an injury caused by crushing the peroneal nerve in rats. METHODS: 53 rats were used, which were divided into six groups: normal, injured and untreated, injured and treated using placebo, injured and treated in the bone marrow, injured and treated in the nerve, and injured and treated in both (nerve and bone marrow. The peroneal nerve was crushed using a pair of tweezers, and subsequently treated with laser for 28 consecutive days. The functional gait evaluation analyzed the footprints, which were recorded with a video camera on an acrylic bridge in the

  16. Equivalente esférico e valores da espessura da camada de fibras nervosas obtidas com o GDX TM Scanning Laser System® Spherical equivalent and nerve fiber layer thickness assessed with GDX TM Scanning Laser System®

    Directory of Open Access Journals (Sweden)

    Lênio Souza Alvarenga

    1999-12-01

    Full Text Available Objetivo: Estudar a influência do equivalente esférico nos valores obtidos pelo GDX TM Scanning Laser System®. Métodos: Foram avaliados 41 olhos de 41 voluntários sem doenças oculares e com campo visual sem alterações. Foi realizada a polarimetria de varredura a laser com o GDX TM Scanning Laser System® de acordo com as instruções contidas no manual do aparelho. Foram comparados os valores obtidos nesse exame em um grupo de pacientes com equivalente esférico positivo e em um outro com este valor nulo ou negativo, pelo teste de Mann-Whitney. Resultados: Não se verificou diferença estatística entre os valores obtidos nos olhos de pacientes do grupo I e os do grupo II. Não foi encontrada correlação entre o equivalente esférico e os valores obtidos com o GDX TM Scanning Laser System®. Conclusões: Na amostra estudada não houve diferença estatística entre os valores obtidos em um grupo de olhos com equivalente esférico positivo e outro com este valor negativo ou nulo, usando-se o GDX TM Scanning Laser System®.Purpose: To evaluate the effect of spherical equivalent on the acquisition of nerve fiber layer (NFL thickness with GDX TM Scanning Laser System®. Methods: Forty-one eyes of 41 volunteers were enrolled in this study. All of them presented with no ocular disease and no visual field defect. The NFL thickness was measured with GDX TM Scanning Laser System® as described in its manual. The values obtained in a group of volunteers with negative spherical equivalent (group I were compared to those from a group with a positive spherical equivalent (group II by the Mann-Whitney test. Results: There was no statistical difference between mea-surements in eyes of group I and those in group II. The NFL thickness measurements were not correlated with the sphe-rical equivalent. Conclusions: In the studied group there was no statistical difference in the GDX TM Scanning Laser System® parameters related to spherical equivalent.

  17. Eficiência do laser diodo 980 nm em comparação à da glicose a 75% na oclusão de veias da orelha de coelhos The efficiency of the diode laser 980 nm compared to glucose 75% in occlusion of the veins in rabbit ears

    Directory of Open Access Journals (Sweden)

    Paulo Roberto da Silva Lima

    2011-06-01

    Full Text Available CONTEXTO: Por ser o laser um método novo no tratamento das varizes, há muitos mitos e dúvidas com relação à sua eficácia; assim, surgiu a necessidade de compará-lo a substância esclerosante mais utilizada em nosso meio (glicose hipertônica. OBJETIVO: Comparar a eficiência do laser diodo 980 nm à glicose 75% na oclusão de veias em orelha de coelho. MÉTODOS: Ensaio aleatório em animais de laboratório por 21 dias. A amostra consistiu de orelhas de coelhos machos adultos. Grupo L (laser: 15 orelhas tratadas com laser; grupo G (glicose 75%: 15 orelhas tratadas com glicose a 75%. Variáveis primárias: veias esclerosadas e/ou ocluídas. Variáveis complementares: volume da substância administrada, complicações e peso. O tamanho da amostra foi estimado em 30 orelhas. Foi realizado o teste exato de Fisher associado ao Risco Relativo (RR, calculando-se o intervalo de confiança (IC de 95% para as variáveis acima. RESULTADOS: A incidência de esclerose ou oclusão venosa no grupo G foi de 53% (8/15; IC95%: 27-79 e no grupo L, 20% (3/15; IC95%: 4-49. O p bicaudal foi de 0,1281, o RR usando a aproximação de Katz foi de 2,66; IC95%: 0,87-8,15. CONCLUSÃO: A eficiência do laser diodo 980 nm em comparação à da glicose 75% na oclusão de veias para o modelo experimental estudado foi equivalente.BACKGROUND: The laser is a new treatment to varicose veins and there is several myths and doubts in relation to its efficacy; then, there is the need to compare it with the most commonly sclerosing solution (hypertonic glucose used in our specialty. OBJECTIVE: To compare the efficiency of the diode laser 980nm to the glucose 75% in the occlusion of veins from the ear of rabbits. METHODS: Aleatory trial in laboratory animals during 21 days. The sample consisted of ears from male adult rabbits. Group L (laser: 15 ears treated with laser; group G (glucose 75%: 15 ears treated with glucose 75%. Primary variables: sclerotic and/or occluded veins

  18. Estudo da microcirculação na hanseníase virchowiana com o uso da microscopia de luz ortogonal polarizada e com laser-doppler fluxometria

    OpenAIRE

    Curt Mafra Treu

    2010-01-01

    A hanseníase é uma doença infecciosa com características únicas, dentre elas o fato de atingir intensamente a inervação da pele e seus anexos. Entremeando estes anexos, está a microcirculação cutânea, que a principio também tem sua inervação comprometida. Vários artigos apontam para alterações de disautonomia microcirculatória, citando como exemplo as alterações no reflexo vasomotor. O presente estudo se propõe a avaliar a microcirculação cutânea na hanseníase virchowiana, tanto em sua morfol...

  19. Forest structure and stem volume assessment based on airborne laser scanning / Avaliação da estrutura florestal e do volume de madeira a partir de laser aerotransportado

    Directory of Open Access Journals (Sweden)

    Markus Hollaus

    2012-10-01

    Full Text Available This paper presents a methodology for the derivation of structural parameters and stem volume in forests based on Airborne Laser Scanning (ALS data. We describe three different measures of horizontal and vertical canopy structure: (1 tree crown segmentation, (2 compactness of vegetation patches, and (3 vertical layering of vegetation patches and canopy cover. An empirical regression model for the derivation of stem volume from the ALS and forest inventory sample plot data is described and its results are validated with extensive reference data. Different study areas in Austria were used to illustrate the workflows. The presented study demonstrates the applicability of the proposed methods on study sites and ALS data of differing characteristics, as well as it points out the suitability of ALS as a tool for reliable wide area assessment of structural parameters and stem volume for forested areas.ResumoEsse artigo apresenta uma metodologia para derivação de parâmetros estruturais e de volume de madeira em florestas baseado em dados de Laser Scanner Aerotransportado (ALS. Nós descrevemos três diferentes medidas da estrutura horizontal e vertical da copa: (1 segmentação da copa da árvore, (2 compacidade das manchas de vegetação, (3 estratificação vertical das manchas de vegetação e cobertura do dossel. Um modelo empírico de regressão para derivar o volume de madeira fazendo uso de dados ALS e dados amostrais obtidos em inventário florestal é descrito e seus resultados são validados com extensivos dados de referência. Diferentes áreas na Áustria foram utilizadas para ilustrar o fluxo de trabalho. O estudo apresentado demonstra a aplicabilidade dos métodos propostos nas áreas de estudo e dos dados ALS de diferentes características, bem como aponta a adequação do ALS como ferramenta confiável para avaliação de parâmetros de estrutura e de volume de madeira de amplas áreas florestais.

  20. Avaliação da eficácia do laser de baixa intensidade no tratamento das disfunções têmporo-mandibular: estudo clínico randomizado

    Directory of Open Access Journals (Sweden)

    Maria Helena Chaves de Vasconcelos Catão

    2013-12-01

    Full Text Available OBEJTIVO: avaliar a eficácia do laser de baixa intensidade no tratamento da dor em pacientes com desordens temporomandibulares. MÉTODO:consistiu de um ensaio clínico randomizado divididos em dois grupos: Grupo 1: laser AsGaAl, Grupo 2: laser InGaAlP, do qual participaram 20 pacientes entre 19 e 35 anos de idade, com diagnóstico de sinais e sintomas de DTM. Os pacientes tinham a amplitude de movimento para abertura máxima da boca e lateralidade registados no início e no final do tratamento a laser. O Laser foi aplicado em quatro pontos pré-auriculares, totalizando 12 sessões três vezes por semana, durante um mês. Dor dos pacientes foi registrado com base na utilização da escala analógica visual (EAV e também por exame físico dos pontos álgicos. RESULTADOS: observou-se redução significante (p<0,028 do nível de dor em ambos os grupos, porém no G1 a significância foi maior. A evolução do limiar de sensibilidade muscular evidenciou diferença estatisticamente significante (p<0,05 para G1 e G2. A laserterapia no Grupo 1 melhorou a abertura bucal em média de 4,643 mm, enquanto no Grupo 2, a média foi de 3,71 mm por paciente. CONCLUSÃO: houve eficácia em ambos os lasers no controle da dor e abertura bucal dos pacientes.

  1. Selection of thermal-resistant leavening (Saccharomyces boulardii) through gamma irradiation; Selecao de linhagens termotolerantes de levedura (Saccharomyces boulardii) atraves da irradiacao gama

    Energy Technology Data Exchange (ETDEWEB)

    Neves, Maria Jose; Martins, Flaviano Santos [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN), Belo Horizonte, MG (Brazil)

    2000-07-01

    Yeast cells acquire resistance to a several stress condition when they are previously exposed to a mild form of the same or of a different stress. In this way yeast cells exposure to temperatures higher than the optimum for growth results in a enhancement of the heat shock proteins and accumulation of trehalose. These cells then acquire the ability to survive under more extreme conditions, a phenomenon referred as transitory thermo-tolerance. We decided to test if gamma irradiation can induced a permanent thermo-tolerance in survival cells irradiated. Lyophilized cells of S. boulardii were irradiated with a {sup 60} cobalt source. This cells were plated in solid medium. The survival cells were counted and the trehalose level were determined. In a second step, this survivals cells were incubated in liquid medium then submitted to a lethal heat shock (52 deg C, 15 min). The cells were plated and again grown at 30 deg C. The survival index and the level of trehalose were again determined. The procedure were repeated successively. The strains showed more thermo-resistance and the level of trehalose was increased without linear correlation with the number of viable cells. (author)

  2. Comparison of three techniques for skin total irradiation with electrons; Comparacao de tres tecnicas de irradiacao total da pele com eletrons

    Energy Technology Data Exchange (ETDEWEB)

    Batista, Delano V.S., E-mail: dbatista@ird.gov.b [Instituto de Radioprotecao e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil); Instituto Nacional de Cancer (INCa), Rio de Janeiro, RJ (Brazil); Bardella, Lucia H. [Instituto Nacional de Cancer (INCa), Rio de Janeiro, RJ (Brazil); Rosa, Luiz A.R. da, E-mail: lrosa@ird.gov.b [Instituto de Radioprotecao e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil)

    2011-10-26

    This paper compared three techniques of skin total irradiation with electrons: 1) horizontal positioning, 2) vertical positioning - rotatory technique and 3) vertical positioning - six fields technique. For that, a anthropomorphic phantom was positioned according to the recommendation for each technique and was i radiated at the linear accelerator by using the 6 MeV electrons. Radiochromic films were positioned on the surface in various regions of the phantom for measurement of absorbed dose. A ionization chamber was positioned inside of equivalent issue plates for dose evaluation due to the photons produced by electron stopping. The technique 2 and 3 have shown too similar in the results and number or discrepant points (8 and 10 respectively) of prescription lower than the technique 1 (22 points). The total body dose of photons of the 1, 2 and 3 techniques was 2.2%, 5.3% and 5.2% respectively

  3. Effects of irradiation on the physicochemical properties of carioca beans; Efeitos da irradiacao nas propriedades fisico-quimicas do feijao carioca

    Energy Technology Data Exchange (ETDEWEB)

    Lima, Damaris Carvalho

    2016-10-01

    The common bean is an important component in the diet of the average Brazilian person. Each harvest of beans, losses occur due to attacks of insects and rodents. One of the ways to preserve the beans, and at the same time keep its nutritional characteristics, is the use of gamma radiation. This study aimed to evaluate the effects of different doses of gamma radiation on the physical and chemical properties of the carioca variety of common beans subject to cooking of soaked and unsoaked beans. Portions of raw beans were used as control and the other was subject to ionizing radiation at doses of 1, 5 and 10 kGy. Following irradiation, a portion of the samples (control and irradiated) were soaked and the other was not, then all beans were cooked. The cooked samples were lyophilized, milled and then accommodated in pots and stored at -23 deg C temperatures. The analysis of chemical composition, determination of protein digestibility, condensed tannin and phytic acid content were performed using the milled samples. Using whole grains, were performed analysis of expansion capability and hydration, cooking time and instrumental color. Irradiation did not alter the chemical composition of soaked and unsoaked samples. The condensed tannin levels did not reduce according to increased doses. The phytic acid concentrations were reduced at the doses of 5 and 10 kGy for soaked samples, whereas for the not soaked beans, gamma irradiation did not influence the phytate content. The protein digestibility decreased on soaked samples, at doses of 1 kGy and in the other doses, the reduction was not significant. As for not soaked beans, increases in digestibility were observed at dose of 10 kGy. As the doses increased, reduction in cooking time on soaked and unsoaked beans was noted. At a dose of 10 kGy, the bean expansion capability increased. The samples' color did not change significantly, as the doses increased. Therefore, it is concluded that ionizing radiation has no effect on the chemical composition and tannin content. Irradiation influenced the phytates when applied in higher doses, but only in soaked samples, as well as mitigate protein digestibility on soaked beans. It reduces cooking time, raises bean expansion capability at a 10 kGy dose, but it does not change the bean color as doses increase. (author)

  4. Chemical and microbiological assessments of the multi mixture treated by gamma radiation; Avaliacao quimica e microbiologica da multimistura tratada por irradiacao gama

    Energy Technology Data Exchange (ETDEWEB)

    Goncalves, Cinthia Graciele

    2008-07-01

    In Brazil, the multi mixture have being used since the eighties as an alternative against severe infantile malnutrition of the poorest population. However, its use is still reason of controversies mainly due to: the presence of anti nutritional factors, the microbiological quality and the nutritional value. Considering the routine use of multi mixture in the region, this work aimed to evaluate samples of multi mixture were collected in the metropolitan area of the City of Belo Horizonte/MG for determining the anti nutritional factors (phytic and oxalic acids), the microbiological quality, the centesimal and mineral composition, and still the induced effect in these factors of the gamma radiation. For the analyses, the samples passed by the process of gamma irradiation at doses of: 2, 4, 6, 8 and 10 kGy and then were evaluated anti nutritional factors (phytic acid and oxalic), the microbiological quality (yeasts and molds, Salmonella, Coagulase positive Staphylococcus, Bacillus cereus, coliform to 45 deg C) to full percentage (moisture, ash, proteins, carbohydrates and lipids) and the efficiency of the method of Paramagnetic Electronic Resonance (EPR) in the detection of irradiated samples. The mineral composition of the samples was carried out by the irradiation by Neutronic Activation. The methods used were searched in literature. The obtained results suggest that the concentration of the phytic and oxalic acids can not be appropriated for the children with severe nutritional deficit and that it would be necessary additional control in their daily ingestion due to the absorption of essential minerals. In general the samples had presented acceptable microbiological quality for consumption, except by one of it. The data of the centesimal and mineral composition, in the usually recommended portions, showed lower concentration than recommended for children. Any significant alteration in phytic and oxalic acids as well as in the centesimal composition were detected after gamma irradiation. The electronic paramagnetic resonance can be detected irradiated samples. (author)

  5. Evaluation of radiation effects on dental enamel hardness and dental restorative materials; Avaliacao do efeito da irradiacao na dureza do esmalte dental e de materiais odontologicos

    Energy Technology Data Exchange (ETDEWEB)

    Adachi, Lena Katekawa; Saiki, Mitiko [Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, SP (Brazil). Supervisao de Radioquimica; Campos, Tomie Nakakuki [Sao Paulo Univ., SP (Brazil). Faculdade de Odontologia. Dept. de Protese

    2000-07-01

    This research presents the results of the microhardness of human dental enamel and of the following dental restorative materials: three dental porcelains - Ceramco II, Finesse and Noritake, and two resin restorative materials - Artglass and Targis, for materials submitted to different times of irradiation at the IEA-R1m nuclear reactor under a thermal neutron flux of 10{sup 12}n cm{sup -2}.s{sup -1} . The results obtained indicated that there is a decrease of the surface microhardness when the enamel is irradiated for 1 h and when dental materials are irradiated for 3 h. However, enamels irradiated for 30 min. did not show significant change of their surface hardness. Therefore, the selection of irradiation time is an important factor to be considered when irradiated teeth or dental materials are used in the investigations of their properties. (author)

  6. Study of gel formation in polypropylene modified by gamma irradiation; Estudo da formacao de geis em polipropileno modificado por irradiacao gama

    Energy Technology Data Exchange (ETDEWEB)

    Oliani, W.L.; Parra, D.F.; Fermino, D.M.; Lima, L.F.C.P.; Lugao, A.B., E-mail: washoliani@usp.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Riella, H.G. [Universidade Federal de Santa Catarina (UFSC), Florianopolis, SC (Brazil)

    2010-07-01

    The linearity of the chains of iPP (isotactic polypropylene) confers to this, low melt strength. This fact limits the use of iPP in processes that demand high stretching. The graft of branches confers improvements in its extensional viscosity, resulting in Polypropylene with High Melt Strength (HMS-PP). Preparation process of the HMS-PP, included iPP in pellets, conditioned in plastic container containing acetylene under pressure of 110 kPa and radiation with {gamma} source of {sup 60}Co in the doses of 5, 12.5 and 20 kGy. The gel fraction of the samples was determined by the extraction of soluble components in xylene under boiling for 12 hours at 138 deg C. The soluble part of the samples was decanted with the total volatilization of the xylene to the room temperature (25 deg C) and deposition in glass blades. These samples had been characterized by Optic Microscopy, Scanning Electron Microscopy and Infrared Spectroscopy. In this study of the morphology, we obtained the formation of gel and microgel of polypropylene with higher incidence in HMS-PP 20 kGy. (author)

  7. Contributions of the food irradiation technology to the nutritional and alimentary safety; Contribuicao da tecnologia de irradiacao de alimentos no fornecimento de seguranca alimentar e nutricional

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira, Sonia Regina Schauffert

    1999-07-01

    This work is a bibliographic review about the contributions of the food irradiation technology on nutritional and alimentary safety. Subjected to research and development for more than 60 years, these technology was approved by a jointly FAO/WHO/IAEA Expert Committees in 1980 with the conclusion that the irradiation of food up to an overall average dose of 10 kGy present no toxicological hazard and introduce no special nutritional or microbiological problems. Following these conclusions general standards and practices for food irradiation were adopted by the Codex Alimentarium Commission in 1983, opening the possibilities for internal applications and international commerce of irradiated food in many countries. Radiation from radioisotopes sources, electron accelerators or X-ray generators can be applied to food in order to reduce the microbial load, insect disinfestation, improving the shelf life extension of the products. Absorbed doses up to 10 kGy level do not introduce significant alterations in the macro or micro nutrients contents or in the sensorial characteristic of irradiated food. Although food safety can be related with many other important topics, irradiation technology improving food quality, reducing food spoilage during preservation and preventing problems related with food borne disease present a good potential to contribute with the foment and guaranty of the nutritional and alimentary safety. (author)

  8. Evaluation of muscle regeneration in aged animals after treatment with low-level laser therapy Avaliação da regeneração muscular em animais idosos após tratamento com laser de baixa intensidade

    Directory of Open Access Journals (Sweden)

    Adriana Pertille

    2012-12-01

    Full Text Available BACKGROUND: The aging process and its associated morphophysiological changes trigger a reduction in the regenerative ability of the satellite cells, a reduction of vascular tissue and an increase in the production of fibroblasts, developing a cellular environment unfavorable for muscle regeneration. OBJECTIVE: The aim of this study was to evaluate the effect of low-level laser therapy on the muscle regeneration of old experimental rat models after contusion. METHOD: A total of 25 old rats,18 months old, were divided into three groups: control group (CT without treatment; injury group (IN with muscle contusion and without treatment and laser group (LA with contusion and low-level laser therapy, 830 nm, 30 mW e 4 J/cm². The no invasive contusion was induced in the Tibialis Anterior muscle and the samples were collected after 7 and 21 treatment sessions. The muscle was evaluated by Light Microscopy and Immunoblotting. RESULTS: After 21 days of treatment there was a significant reduction in the areas of inflammation/regeneration of the LA 21 group compared to IN 21 group. The cross-sectional area of the fibers in regeneration was not statistically different between the groups. Molecular analysis showed that the content of MyoD was statistically reduced in the IN 21 group compared to the CT group. The Myogenin content was increased in the IN 21 group compared to the CT group. Ultimately, the content of TGF-β1 on the IN 21 group was higher when compared to the CT group. CONCLUSION: Considering the parameters used, the laser therapy demonstrated to be effective for muscle regeneration in old rats, however only through its anti-inflammatory effect.CONTEXTUALIZAÇÃO: O processo de envelhecimento e suas consequentes alterações morfofisiológicas desencadeiam redução da habilidade regenerativa das células satélites, redução da vascularização tecidual e aumento da produção de fibroblastos, desenvolvendo-se um ambiente celular desfavor

  9. Ineficácia da laserterapia aplicada no trajeto do nervo e nas raízes medulares correspondentes Lack of effectiveness of laser therapy applied to the nerve course and the correspondent medullary roots

    Directory of Open Access Journals (Sweden)

    Fausto Fernandes de Almeida Sousa

    2013-04-01

    Full Text Available OBJETIVO: Verificar a influência da irradiação do laser de baixa intensidade na regeneração do nervo fibular comum de ratos após lesão por esmagamento. MÉTODOS: Foram utilizados 25 ratos, divididos em três grupos: 1 nervo intacto, e não tratados; 2 nervo lesado, e não tratado; 3 nervo lesado, e laser irradiado sobre a região medular correspondente às raízes do nervo ciático e subsequentemente no trajeto do nervo lesado. A irradiação foi realizada por 14 dias consecutivos. RESULTADOS: Foram avaliados por meio da análise funcional da marcha, através do índice funcional do peroneiro, e por análise morfométrica através do número total de fibras nervosas mielinizadas e sua densidade, número total de células de Schwann, número total de vasos sanguíneos e sua área, diâmetro mínimo da fibra e razão-G. CONCLUSÃO: De acordo com a análise estatística, não houve diferença significativa entre os grupos, e os autores concluem que a irradiação do laser de baixa intensidade possui pouca ou nenhuma influência na regeneração nervosa e recuperação funcional. Trabalho experimental.OBJECTIVE: to investigate the influence of low intensity laser irradiation on the regeneration of the fibular nerve of rats after crush injury. METHODS: twenty-five rats were used, divided into three groups: 1 intact nerve, no treatment; 2 crushed nerve, no treatment; 3 crush injury, laser irradiation applied on the medullary region corresponding to the roots of the sciatic nerve and subsequently on the course of the damaged nerve. laser irradiation was carried out for 14 consecutive days. RESULTS: animals were evaluated by functional gait analysis with the peroneal functional index and by histomorphometric analysis using the total number of myelinated nerve fibers and their density, total number of schwann cells, total number of blood vessels and the occupied area, minimum diameter of the fiber diameter and g-quotient. CONCLUSION: according to

  10. Laser ablation - inductive coupled plasma - mass spectrometer (LA-ICP-MS) geochemistry characterization of albitites associated to uranium in Lagoa da Rabicha deposit, Lagoa Real, BA (Brazil)

    International Nuclear Information System (INIS)

    Oliveira, Lucilia A. Ramos de; Rios, Francisco Javier; Amorim, Lucas Eustaquio Dias; Souza, Aurelio da Silva; Prates, Sonia Pinto; Yardley, Bruce; Matos, Evando Carele

    2009-01-01

    The LA-ICP-MS technique is a good tool for mineral geochemical characterization. The technique has high spatial resolution, elevated sensibility, low detection limits and multi-elementary analysis possibility. Almost all chemistry elements can be analyzed by this methodology. Briefly, this methodology consists in vaporize the sample by Laser Ablation, which is dragged by argon into the Plasma where are created and accelerated the ions. They are separated by their mass/charge ratio into the Mass Spectrometer, being conveyed to a detector that convert the signals in specters. In this work LA-ICP-MS analyses were performed in two albitites thin sections, a mineralized and a non mineralized sample. Both samples are from the Lagoa da Rabicha Deposit, Uranium Lagoa Real Province, BA. From these analysis it was possible to chemically characterize the minerals present in the samples and better understand the trace elements on them. The results for plagioclase in both samples show that it is albite (NaAlSi 3 O 8 ). The albite from sample 200907-20 shows traces of strontium, lanthanum, cerium, neodymium, samarium and thorium in one crystal. The albite from sample 200907-23 has strontium with uranium, yttrium and lead in smaller quantities. The results obtained in this work are very important and contribute to a better understanding of the uranium origin in Lagoa Real deposits. (author)

  11. Aplicações do laser de baixa intensidade no tratamento da síndrome do túnel do carpo - doi: 10.5102/ucs.v7i2.996

    Directory of Open Access Journals (Sweden)

    João Paulo Caldas Cardozo

    2010-06-01

    Full Text Available O objetivo deste trabalho foi analisar, por meio de revisão bibliográfica, a eficiência da aplicação do Laser de baixa intensidade (LBI no tratamento da Síndrome do Túnel do Carpo (STC. Para isso foi realizada uma pesquisa de artigos nas bases de dados PUBMED e BIREME, publicados entre 1985 e 2009, nos idiomas espanhol, inglês e português. Grande parte dos artigos consultados revelou que a LBI é eficaz no tratamento de pacientes diagnosticados com Síndrome do Túnel do Carpo. Concluiu-se que, quando associada ao uso de órtese para o punho, a laserterapia é um método eficiente no tratamento da síndrome do túnel do carpo.

  12. Low intensity laser therapy and functional orthopedics contribution in pain and temporo mandibular dysfunction treatment; Contribuicao do laser em baixa intensidade e da ortopedia funcional dos maxilares no tratamento da dor e disfuncao tempora-mandibular

    Energy Technology Data Exchange (ETDEWEB)

    Lollato, Renata Fronzaglia

    2003-07-01

    Temporo Mandibular Dysfunction (TMD) is a term used to describe disorders which involve temporomandibular joint (TMJ), masticatory muscles, and associated structures, isolatedly or not, whose most frequent symptoms pain. Its etiology involve controversies, and among risk factors is Class 11 malocclusion. A lot of techniques are used for TMD treatment, and the most recent are Low Intensity Laser Therapy (LILT) and Functional Orthopedics (FO). The aim of this study was to evaluate pain and buccal mobility in subjects with Class II malocclusion and TMD symptoms, treated with LILT and FO associated or not. Eighteen subjects were selected and divided in three groups. Group 1 was treated with LILT, {lambda} = 780 nm, 70 mW, 15 J/cm{sup 2} per point, in six sessions during two weeks. The application was in three points around the TMJ and in masticatory muscles: masseter, temporalis, sternomastoid and trapezius, on both sides when there was pain. Palpation was made before and five minutes after application and subjects answered a questionnaire with a score for pain evaluation. Group 2 received functional orthopedics aparatology Planas Indirect Composed Plates, and was evaluated once a week during two weeks, after palpation and following the same score as group 1. Group 3 received both therapies at the same time, and the first application coincided with the aparatology installation. The evaluation followed the parameters of group 1. The results were statically analyzed , and in general form did not show significant differences. There was remission of pain symptoms in ali of the groups, and group 3 showed more rapidly results. This fact leaded us to a conclusion that the association of the LILT with FO was the best treatment for the pain symptoms remission in TMD. (author)

  13. Analise da adaptação marginal de proteses fixas implanto-suportadas em liga de titanio, fundidas em monobloco ou submetidas a soldagem laser e eletroerosão atraves do assentamento passivo

    OpenAIRE

    Tatiana Bernardon Peixoto Silva

    2001-01-01

    Resumo: A proposta deste trabalho foi avaliar o desadaptação marginal de infra-estruturas de próteses fixas implanto-suportadas fundidas em monobloco e submetidas à soldagem laser, antes e após a eletroerosão através da análise do assentaIÍlento passivo. Vinte infta-estruturas foram confeccionadas a partir de um modelo mestre metálico com cinco implantes fixados na região inter-forâmes paralelos entre si, e fundidas em titânio comercialmente puro - Ti c. p. (Rematitan - Dentaurum - Pforzhein ...

  14. Influência da energia de soldagem em uniões de lâminas finas através de laser pulsado de Nd:YAG Effect of the heat input on pulsed Nd:YAG laser welding of thin foil

    Directory of Open Access Journals (Sweden)

    Vicente A. Ventrella

    2010-12-01

    Full Text Available A soldagem laser vem sendo utilizada como um importante processo de manufatura. Ela pode ser utilizada tanto no modo contínuo quanto no modo pulsado. No processo onde se utiliza laser pulsado é possível realizar soldas de costura em lâminas finas, através da sobreposição dos pulsos. Nesse caso a velocidade de soldagem é definida pela taxa de sobreposição, taxa de repetição e diâmetro do pulso. A soldagem de sobreposição de lâminas finas apresenta problemas típicos como distorção excessiva da junta soldada, falta de contato entre as lâminas a serem soldadas (presença de um gap de ar, perfuração da junta e presença de altos níveis de tensões residuais. O processo de laser pulsado é preferido em relação ao processo por laser contínuo, pois ele possibilita um melhor controle da energia de soldagem. O presente trabalho estudou a influência da energia do pulso, no caso processo de soldagem laser Nd:YAG, na soldagem de lâminas finas ( 100µm de aço inoxidável austenítico AISI 316L, utilizado no revestimento de sensores (que trabalham em ambiente corrosivo da indústria sucroalcooleira. Utilizou-se energia de pulso de 1,0 a 2,25 Joules, com incremento de 0,25 Joules e largura temporal de 4 ms. As soldas foram realizadas com proteção gasosa de argônio. Foram realizadas análises macrográficas das juntas soldadas, através de secções transversais das mesmas e, ensaios de microdureza Vickers e ensaios de tração. Os resultados obtidos mostraram que o controle da energia do pulso, em processo de soldagem por laser de lâminas finas é de fundamental importância para a geração de juntas soldadas com boas propriedades mecânicas e livres de descontinuidades. O limite de resistência da junta soldada aumentou no início e depois sofreu um pequeno decréscimo em função do aumento da energia do pulso. O processo mostrou-se muito sensível à presença de gap entre as lâminas.Laser beam welding has been used widely

  15. Avaliação da precisão de duas técnicas de união de estruturas metálicas - brasagem e soldagem a laser - em uma prótese clássica de Brånemark pelo método da microscopia eletrônica de varredura (MEV)

    OpenAIRE

    Lucio Hirokuni Kanashiro

    2005-01-01

    Este estudo avaliou a precisão de duas técnicas de união, a brasagem e a soldagem a laser, em estruturas metálicas de uma prótese clássica de Brånemark. Dez estruturas fundidas em NiCr foram segmentadas em 4 partes e analisadas no MEV em pontos pré-estabelecidos, vestibular e proximal, totalizando 8 pontos de análise para cada estrutura. Na primeira fase, foi mensurada a fenda marginal existente entre o análogo do implante e o abutment UCLA antes da união destes segmentos através da brasagem ...

  16. Use of laser fluorescence (DIAGNOdentTM for in vivo diagnosis of occlusal caries: a systematic review O uso da fluorescência a laser (DIAGNOdentTM no diagnóstico de cáries oclusais in vivo: revisão sistemática

    Directory of Open Access Journals (Sweden)

    Isauremi Vieira de Assunção Pinheiro

    2004-09-01

    Full Text Available This systematic review was conducted to assess the accuracy of laser fluorescence (DIAGNOdentTM for diagnosis of occlusal caries in permanent teeth, using any sort of gold standard. The MEDLINE, LILACS, BBO and Cochrane library databases accessed by BIREME were searched for English, Spanish and Portuguese-language papers published between 1982 and 2003. Four works in English were selected. DIAGNOdentTM was found to be an accurate method for diagnosis of occlusal caries, mainly if employed simultaneously with visual inspection.Esta revisão sistemática foi realizada para avaliar a precisão da fluorescência a laser (DIAGNOdentTM para o diagnóstico da cárie oclusal em dentes permanentes, utilizando qualquer tipo de gold standard. As bases de dados MEDLINE, LILACS, BBO e Cochrane Library, acessadas via BIREME, foram utilizadas para a busca de artigos em idioma inglês, espanhol e português, publicados de 1982 a 2003. Foram selecionados quatro trabalhos em inglês. Foi observado que o DIAGNOdentTM é um método preciso para o diagnóstico da cárie oclusal, principalmente se associado à inspeção visual.

  17. GERAÇÃO DE MODELO DIGITAL DE TERRENO POR MEIO DA FILTRAGEM DE DADOS OBTIDOS POR VARREDURA A LASER UTILIZANDO UM MÉTODO BASEADO NO PRINCÍPIO DA DECLIVIDADE

    Directory of Open Access Journals (Sweden)

    Wallace Felipe Francisco Cardoso

    2014-06-01

    Full Text Available Due the advances in the technology of laser scanning systems, research in several countries have been initiated with the aim of exploring the recently technological resources developed. The result obtained by laser scanning systems provided the details of regions features and update many of the national territories models. The data generated by laser scanning match the altimetry data set named as Digital Elevation Model. This model derivation, when containing only terrain features, is called Digital Terrain Model. However, the Digital Terrain Models cannot be easily generated by laser scanning. In general, the Digital Terrain Models are derived from Digital Elevation Models applying filtering methods. This work objective is to adapt a Digital Elevation Model filtering method and discuss the results obtained.

  18. Evaluation of synergistic effect in vacuum pack, refrigeration and irradiated treatments of minimally processed cassava; Avaliacao do efeito sinergistico da embalagem a vacuo, irradiacao e refrigeracao da mandioca minimamente processada

    Energy Technology Data Exchange (ETDEWEB)

    Pedroso, Bianca Maria

    2005-07-01

    Cassava is cultivated almost all over the world and it is considered one of the most important nutritious sources of calories in the human diet. Cassava is a viable food against starvation in several poor areas of the world because it is an extremely resistant culture and may reach satisfactory economical yield. We utilized vacuum packed industrialized cassava irradiated with 0,1 kGy, 3kGy and 5kGy and stored under refrigeration for 1, 21, 30 and 50 days. Our objective was to analyse the synergistic effect of vacuum packing, irradiation and refrigeration on the preservation of minimally processed cassava. The samples were analyzed for pH, acidity, weight, humidity, texture and color. The irradiation did not affect the chemical characteristics of the cassava. Neither the pH nor the acidity, the most relevant variables to verify deterioration in cassava, presented significant alterations during the period of storage. Comparing the irradiated treatments, the dose of 1kGy and 3kGy affected the physic-chemical characteristics of the cassava the least during the period of storage and refrigeration for 50 days; the doses of 1kGy,3kGy and 5kGy scored the highest rates the sensorial analysis during the period of storage for 21 days. (author)

  19. In vitro assessment of the composition and microhardness of hard tissues of oral cavity submitted to gamma irradiation; Avaliacao in vitro da composicao e microdureza dos tecidos duros da cavidade bucal submetidos a irradiacao gama

    Energy Technology Data Exchange (ETDEWEB)

    Paredes, Wilber Edison Bernaola

    2017-11-01

    Clinical Radiotherapy is extremely important for the treatment of malignant lesions of the head and neck region, however, exposure to ionizing radiation can lead to systemic or local complications during and after radiation treatment. Among these immediate local complications are the oral cavity xerostomia and the consequent oral mucositis. Regarding late complications produced by radiation, tooth decay of radiation and osteoradionecrosis are included, which are considered dose-dependent lesions, with high incidence in recent decades and difficult to manage, although these appear after completion of treatment and under the influence of local factors. The methodology proposed in this study consists in evaluating the effect of gamma radiation after irradiation of the samples, using the dose used in patients suffering with head and neck cancer. The samples were obtained from human enamel and root dentin; and swine mandibular bone, which were previously polished, and then submitted to the analysis of the initial surface microhardness of all groups. Subsequently, the samples were irradiated in a dose rate of 4 Gy per day, completing a total dose of 72 Gy. Finally, the samples were submitted to surface microhardness analysis after irradiation, which presented statistically significant results from the Student t, ANOVA and Tukey statistical tests referred to the difference of the mean of the initial and final values of each study group with a significant value of p = 0.00 (<0.05). Regarding the morphological analysis in scanning electron microscopy (SEM), the deleterious effect of gamma irradiation was evidenced as structural cracks, breaks and superficial fractures of the analyzed tissues and the biochemical analysis by Attenuated Total Reflection technique using Fourier transform infrared spectroscopy (ATR - FTIR) showed degradation of inorganic components and denaturation of organic compounds; whereby, the effect of gamma irradiation on the hard tissues of the oral cavity with respect to mechanical, compositional and morphological properties was deleterious and this study highlighted the isolated action of this ionizing radiation which contributes highly for its appearance, independent of local and systemic factors in the irradiated patients. (author)

  20. Effects of irradiation and refrigeration on the nutrients and shelf-life of tilapia (Oreochromis niloticus);Efeitos da irradiacao e refrigeracao na qualidade e no valor nutritivo da tilapia (Oreochromis niloticus)

    Energy Technology Data Exchange (ETDEWEB)

    Siqueira, Alessandra Aparecida Zilio Cozzo de

    2001-07-01

    The objective of this study is to enhance the shelf-life of processed fish, combining ionizing radiation and refrigeration with minimal processing. The physical, chemical, nutritional and microbiological characteristics of the specie Tilapia nilotica (Oreochromis niloticus) were studied in eviscerated samples and in commercial cuts. The fish were separated into samples irradiated with 1.0, 2.2 and 5 kGy and non-irradiated samples. They were stored at temperatures ranging from 0.5 deg C to -2 deg C for 20 and 30 days. During storage, the level of moisture in the non-irradiated samples decreased and the levels of protein and lipid increased while the irradiated samples remained stable. The levels of pH, TVB-N and NPN increased in the non-irradiated samples but tended to remain stable in the irradiated fish samples. During storage, microbiological analyses for the presence of coliforms proved the efficiency of the irradiation process. The irradiated samples had a microbiological content below the levels established by the Brazilian seafood legislation, whereas the non-irradiated samples had a higher microbiological content and were not in conformity with the officially permitted levels. Salmonella spp. and Staphylococcus aureus were not detected. The levels of amino acids in muscles and fatty acids in oil remained stable in the irradiated fish stored samples but decreased in the non-irradiated ones. Lipid-oxidation, measured by the TBARS test, showed a tendency to increase when the dose of irradiation increased. The storage products after 30 days showed good acceptability for sensorial parameters, appearance, odour, color and texture, so it is possible to increase the shelf life of a minimally processed tilapia using combined irradiation and refrigeration. (author)

  1. Inibição da expressão de ciclooxigenase 2 em feridas cutâneas de camundongos NOD submetidos à terapia a laser de baixa intensidade Inhibition of cyclooxygenase 2 expression in NOD mice cutaneous wound by low-level laser therapy

    Directory of Open Access Journals (Sweden)

    Carolina de Lourdes Julião Vieira Rocha

    2012-09-01

    Full Text Available CONTEXTO: A terapia a laser de baixa intensidade (LLLT tem sido relatada como importante moduladora da cicatrização de feridas cutâneas aumentando a proliferação fibroblástica associada ao aumento da expressão da citocina fator transformador de crescimento- β2 (TGF-βB2. OBJETIVO: No presente estudo foram avaliados os efeitos da LLLT sobre a expressão da enzima ciclooxigenase 2 (COX2 no sítio do reparo tecidual utilizando o modelo experimental com camundongos diabéticos não obesos (NOD para estudar a cicatrização de feridas cutâneas. MÉTODOS: Foram utilizados 30 camundongos NOD, destes 14 ficaram diabéticos e foram divididos em dois grupos: o grupo I (n=7 foi submetido a um procedimento cirúrgico de feridas cutâneas e o grupo II (n=7 foi submetido a um procedimento cirúrgico de feridas cutâneas e tratados com LLLT. O grupo II foi submetido à LLLT nos seguintes parâmetros: 15 mW de potência, dose de 3,8 J/cm² e tempo de aplicação de 20 segundos. Após sete dias do ato cirúrgico e após aplicação do laser, os animais foram eutanasiados com sobredose de anestesia e amostras das feridas foram colhidas para posterior análise histopatológica, histomorfométrica e imuno-histoquímica. RESULTADOS: A LLLT promoveu a inibição da expressão da COX2 em feridas cutâneas de camundongos diabéticos. CONCLUSÃO: Em conjunto, os resultados sugeriram que a LLLT é capaz de modular negativamente a expressão da enzima COX2 contribuindo para o controle da resposta inflamatória em feridas cutâneas de camundongos NOD.BACKGROUND: Low-level laser therapy (LLLT has been reported to modulate the healing of wounds by inducing an increase in fibroblast number associated with increased expression of the cytokine transforming growth factor-β2 (TGF-β2. OBJECTIVE: In the present study, the effect of LLLT on expression of COX2 at the site of tissue repair was evaluated, using an experimental model with non obese diabetic mice (NOD to study

  2. Clinical evaluation of dentin hypersensitivity treatment with the low intensity Gallium-Aluminum-Arsenide laser - AsGaAl Avaliação clínica do tratamento da hiperestesia dentinária com laser de baixa potência de Arseniato de Gálio-Alumínio - AsGaAl

    Directory of Open Access Journals (Sweden)

    Luciana Chucre Gentile

    2004-12-01

    TODOS: Foram selecionados 32 pacientes, 22 do sexo feminino e 10 do sexo masculino, com idades entre 20-52 anos. Os 32 pacientes foram distribuídos de maneira aleatória em dois grupos, um tratado e outro controle, um total de 68 dentes compôs a amostra, sendo que 35 compuseram o grupo tratado, e 33 o grupo controle. O grupo tratado foi submetido a seis sessões sucessivas de irradiações em intervalos de 48 a 72 horas, o grupo controle recebeu como placebo aplicações de luz do fotopolimerizador. RESULTADOS: observou-se redução significativa na sensação dolorosa entre a fase inicial e após as seis sessões de tratamento com laser, porém tal redução, também pode ser observada para o grupo controle, submetido ao placebo. CONCLUSÃO: a terapia com laser de baixa potência de AsGaAl induz redução estatisticamente significante da sensação dolorosa, após cada uma das aplicações, e entre o início e o final do tratamento, embora não tenha havido, diferença estaticamente significante, ao final do tratamento e após a avaliação mediata dos resultados (após 6 semanas entre o grupo tratado (laser e o grupo controle (placebo; dificultando a mensuração real da efetividade do laser e do efeito placebo.

  3. Efeitos da laserterapia de baixa potência na reposta oxidativa epidérmica induzida pela cicatrização de feridas Effects of low-level laser therapy on epidermal oxidative response induced by wound healing

    Directory of Open Access Journals (Sweden)

    PCL Silveira

    2009-08-01

    Full Text Available INTRODUÇÃO: O uso terapêutico do laser de baixa potência na fisioterapia tem aumentado significativamente. OBJETIVO: Avaliar os efeitos da laserterapia de baixa potência nos parâmetros oxidativos na cicatrização de feridas em ratos. MÉTODOS: Dezoito ratos Wistar foram divididos randomicamente em 3 grupos (controle 5 dias, n=6; 5 dias/2 J/cm², n=6; 5 dias/4 J/cm², n=6. Uma única ferida circular medindo 8 X 8 mm foi cirurgicamente realizada no dorso do rato. Trinta minutos após a última irradiação, os ratos foram submetidos à eutanásia, e o tecido irradiado foi removido cirurgicamente e armazenado a -70ºC. Foi determinada a atividade das enzimas da cadeia respiratória: DCIP oxirredutase (complexo II e succinato desidrogenase solúvel (SDH, atividade do citocromo c oxidase (complexo IV, produção de ânion superóxido, atividade da superóxido dismutase (SOD e catalase (CAT. A lipoperoxidação foi avaliada pela técnica de TBARS. RESULTADOS: Os resultados mostram uma diminuição na atividade do complexo II nos grupos irradiados por 5 dias com 2 e 4 J/cm², enquanto a produção de ânion superóxido mostrou uma diminuição significativa no grupo irradiado por 5 dias com 4 J/cm² em relação ao grupo controle. Além disso, um aumento significativo na atividade da catalase foi observado no grupo irradiado por 5 dias com 2 J/cm², como também uma diminuição da peroxidação lipídica nos dois grupos irradiados. CONCLUSÕES: Os resultados do presente estudo indicam que o laser estimula a atividade antioxidante e protege a célula contra danos oxidativos durante o processo de cicatrização de feridas cutâneas em ratos.BACKGROUND: Therapeutic use of low-level laser in physical therapy has increased significantly. OBJECTIVE: To assess the effects of low-level laser therapy on the oxidative parameters of wound healing in rats. METHODS: Eighteen Wistar rats were randomly divided into three groups (control, 5 days, n=6; 2 J

  4. O impacto da cirurgia de ceratectomia fotorrefrativa (PRK e ceratomileuse assistida por excimer laser in situ (LASIK na qualidade visual e de vida em pacientes com ametropias The impact of photorefractive excimer laser keratectomy (PRK and laser in situ keratomileusis (LASIK on visual quality and life in patients with ametropias

    Directory of Open Access Journals (Sweden)

    Ricardo Belfort

    2008-02-01

    Full Text Available OBJETIVO: Avaliar a qualidade de vida e de visão e o estresse de pacientes portadores de ametropias submetidos a procedimentos cirúrgicos. MÉTODOS: Estudo longitudinal observacional em que foram estudados 100 pacientes; 54 usuários de óculos, 21 usuários de lentes de contato interessados no procedimento cirúrgico e 25 controles usuários de óculos ou lentes de contato, mas que não desejavam ser operados no período de um ano. Os questionários aplicados foram o National Eye Institute Visual Function Questionnaire (NEI-VFQ-25 de qualidade de vida e o Self Reporting Questionnaire - SRQ-20 para avaliação da saúde mental. Os pacientes que se submeteram à cirurgia responderam aos questionários aplicados por uma observadora antes da mesma, três, seis e doze meses após a intervenção. O grupo controle respondeu de forma auto-aplicada no início do estudo, seis e doze meses após a primeira avaliação. RESULTADOS: No grupo da cirugia dos 54 pacientes que usavam óculos 39 fizeram cirurgia de ceratectomia fotorrefrativa por excimer laser(PRK e 15 fizeram ceratomileuse assistida por excimer laserin situ (LASIK e dos 21 que usavam lentes de contato 12 fizeram cirurgia de ceratectomia fotorrefrativa e nove fizeram ceratomileuse assistida por excimer laser in situ (LASIK. O grupo controle esteve estável durante os 12 meses em relação aos instrumentos aplicados. Três meses após a cirurgia o grupo da cirurgia apresentou melhora significante da qualidade de vida e de visão em relação ao pré-operatório independentemente do tipo de cirurgia realizada. Um ano após a cirurgia os índices de qualidade de vida e de saúde mental, foram semelhantes aos do grupo controle. O Self Reporting Questionnaire - SRQ 20 mostrou diminuição significante do índice de sintomas a partir dos três meses de pós-operatório. CONCLUSÃO: A qualidade de visão e de vida dos pacientes submetidos à cirurgia de correção de ametropia mudou

  5. Evaluation of the permeability and morphological alteration of the dental surface after apicoectomy, treatment and preparation with Er:YAG and Nd:YAG lasers; Avaliacao da permeabilidade e da alteracao morfologica da superficie dentinaria apos apicectomia, tratamento e retropreparo com os lasers de Er:YAG e Nd:YAG

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Rodrigo Guerra de

    2001-07-01

    One of the objectives of endodontic treatment is to resolve pathological periapical processes caused by microbial contamination of the dental pulp. Correct execution of the necessary chemical preparation prior to surgery generally results in positive outcomes. However, a percentage of cases do not respond favorably and therefore require retreatment, a conservative therapeutic option. There are meanwhile a number of treatment failures which do not respond to these conservative measures and must therefore be subjected to paraendodontic surgical procedures. One of the principal problems of this therapeutic conduct is linked to the surface permeability of the dentin after apicoectomy and the lack of adequate marginal adaptation between the retrofilling material and the cavity walls. This permits the percolation of microorganisms and their metabolic by products from the system of root canals to the periapical region, thereby compromising the necessary tissue repair. The present work proposes the evaluation of the surface and marginal permeability of cut dentin after apicoectomy and treatment with Er:YAG and Nd:YAG lasers with fiber optics and then retrofilled with intermediate restorative material (IRM). A total of 24 single rooted teeth whose canals were endodontically treated were divided into 3 experimental groups: group I, whose apices were sectioned with an Er:YAG laser and the resulting cavity and the cut dental surface were irradiated with this laser via a 50/10 type fiber; in group II the apicoectomy was conducted with an Er:YAG laser and the resulting cavity and the cut surface were irradiated with a Nd:YAG laser; in group III, the samples were apicoectomized and the cavities were treated with a high speed bur (control group). Analysis of the infiltration of the dye methylene blue throughout the cut dental surface and the reconstruction demonstrated that the samples in the irradiated groups presented lower indices of infiltration than the control group. The

  6. Cicatrização da membrana timpânica na timpanocentese com laser de argônio comparado à técnica com microlanceta: estudo experimental em ratos Tympanic membrane healing in myringotomies performed with argon laser or microknife: an experimental study in rats

    Directory of Open Access Journals (Sweden)

    Lucio Almeida Castagno

    2006-12-01

    Full Text Available Otite média secretora (OMS e otite média aguda recorrente (OMAR podem necessitar tratamento cirúrgico para adequada ventilação da orelha média. A abertura clássica do tímpano (timpanocentese requer incisão por microlanceta sob controle de microscópio cirúrgico e mantém-se patente por alguns dias. Estudos recentes sugerem que a timpanocentese feita por diferentes lasers pode permanecer permeável por maior tempo, o que possibilitaria a normalização da otite média. MATERIAL E MÉTODOS: Neste estudo experimental 34 ratos linhagem Wistar, albinos, machos adultos pesando cerca de 300g, foram anestesiados com cetamina 27 mg/kg e xilazina 2,7 mg/kg. A seguir, foram submetidos à timpanocentese incisional com microlanceta no ouvido direito (ML-OD, e à timpanocentese mediada por laser de argônio no ouvido esquerdo (LA-OE. RESULTADOS: Não houve diferença significativa no tempo de cicatrização das timpanocenteses feitas com laser de argônio ou microlanceta. Todas as timpanocenteses cicatrizaram em 10 dias. CONCLUSÃO: A timpanocentese com laser de argônio apresentou patência e cicatrização semelhantes à técnica clássica com microlanceta realizada em ratos Wistar sem enfermidades de orelha média.Secretory otitis media (SOM and recurrent acute otitis media (RAOM may require surgical treatment to proper ventilate the middle ear. Incisional myringotomy is usually done under microscopy with a micro-knife , but it remains patent for just a few days. Recent research indicates that laser assisted myringotomies remain open much longer, allowing middle ear ventilation and healing. MATERIAL AND METHODS: In this experimental study 34 white, male, adult, Wistar rats, without middle ear disease were submited to anesthesia with ketamine 27 mg/kg and xylazine 2,7 mg/kg. Incisional myringotomy was done on the right ear, while laser myringotomy was done on the left. Myringotomies were evaluated periodically until healing. RESULTS: The healing

  7. Análise clínica do efeito da fotobiomodulação laser (GaAs - 904 nm sobre a disfunção temporomandibular Clinical analysis of the effect of laser photobiomodulation (GaAs - 904 nm on temporomandibular joint dysfunction

    Directory of Open Access Journals (Sweden)

    JC Frare

    2008-02-01

    Full Text Available INTRODUÇÃO: Nos últimos anos, tem sido notado grande interesse no estudo de novas modalidades para o tratamento das disfunções temporomandibulares (DTM. A dor descrita como dor facial, cefaléia ou dor de ouvido, comumente exacerbada pela função da mandíbula, é, em geral, a principal queixa do paciente. A fotobiomodulação laser vem sendo utilizada no tratamento da dor em DTM. OBJETIVO: O objetivo deste estudo foi verificar o nível de dor de pacientes com DTM tratados com fotobiomodulação laser. MATERIAIS E MÉTODOS: Foram estudados 18 pacientes do sexo feminino, com idade média de 27 anos (± 7, com diagnóstico de DTM, os quais foram separados aleatoriamente em dois grupos: Placebo (Controle e Tratado. O Grupo Tratado (n= 10 recebeu atendimento duas vezes por semana, por quatro semanas consecutivas (totalizando oito aplicações. Utilizou-se o laser de GaAs (904 nm, 6 J/cm², 0,38 mW/cm², área do feixe de 0,039 cm², com modo de emissão contínua. Realizou-se a aplicação do laser em quatro pontos pré-auriculares e um em meato acústico externo. O Grupo Placebo (n= 8 foi manipulado como o tratado, porém com o laser desligado. Para análise do nível de dor dos pacientes, empregou-se a Escala Visual Analógica (EVA de dor, antes e após a terapia. Para a análise dos dados, empregou-se o teste t de Student, com nível de significância de 5% (pINTRODUCTION: Over the last few years, there has been great interest in studying new methods for treating temporomandibular joint dysfunction (TMD. Pain, described as facial pain, headache or earache, usually exacerbated by jaw use, is generally the patients' main complaint. Laser photobiomodulation has been used for treating pain in cases of TMD. OBJECTIVE: The aim of this study was to investigate the pain levels in TMD patients treated with laser photobiomodulation. MATERIAL AND METHODS: Eighteen female patients of mean age was 27 years (± 7, with a diagnosis of TMD, were studied

  8. Avaliação imediata da dor e edema em lesão muscular induzida por formalina e tratada com laser 808 nm Immediate pain and edema assessment in muscular injury induced by formalin and treated with low-level laser (808nm

    Directory of Open Access Journals (Sweden)

    Emerson Borato

    2008-10-01

    Full Text Available O laser de baixa potência induz a bioestimulação celular, podendo acelerar a cicatrização de feridas, promover a regeneração do músculo esquelético, diminuir a resposta inflamatória, estimular a neoformação de vasos sanguíneos e diminuir a dor. O objetivo deste estudo foi analisar os efeitos de três doses de laser de baixa intensidade (808nm, na dor e edema imediatos, em ratos submetidos a lesão experimental do músculo gastrocnêmio lateral. Foram utilizados 24 ratos Wistar, distribuídos aleatoriamente em quatro grupos, sendo: GC - animais lesionados e tratados com aparelho desligado (simulacro; G20 - animais lesionados e irradiados com dose de 20J/cm²; G50 - animais lesionados e irradiados com 50J/cm; e G100 - animais lesionados e irradiados com 100J/cm². Para a produção da lesão experimental, introduziu-se 0,1mL de formalina a 5% no ventre do músculo gastrocnêmio lateral direito. A avaliação da dor ocorreu através do tempo de elevação da pata (TEP e o edema foi avaliado com auxílio de paquímetro metálico; ambas as avaliações ocorreram pré-lesão, pós-lesão, pós-tratamento, duas, oito e 24 horas pós-lesão. Os resultados mostraram aumento significativo do TEP e da avaliação com paquímetro, após a indução da lesão. Conclui-se que laser nos parâmetros utilizados não produziu diminuição na dor e edema, em animais submetidos a lesão muscular com injeção de formalina a 5%.Low-level laser therapy induces to cellular bioestimulation and can accelerate wound healing, promote skeletal muscle regeneration, decrease inflammatory response, stimulate neovascularization and decrease pain. The aim of this study was to analyze the effects of three doses of low-level laser therapy (808 nm, in the immediate pain and edema, in rats submitted to experimental injury of the lateral gastrocnemius muscle. Twenty four Wistar rats, randomly distributed in the following four groups were used: CG - injured and treated

  9. Marginal microleakage in vitro study of occlusal fissures sealing prepared and etched or not with Er: YAG laser; Avaliacao in vitro da microinfiltracao marginal em selamentos oclusais preparados e condicionados ou nao pelo laser de Er:YAG

    Energy Technology Data Exchange (ETDEWEB)

    Youssef, Fernanda de Almeida

    2004-07-01

    The aim of this in vitro study was to evaluate the degree of marginal microleakage in occlusal sealing by invasive techniques, after preparation with Er:YAG laser followed or not by Er:YAG laser etching and compared to the conventional technique. Thirty human premolars were divided into three groups: A (control group) - cavities were prepared with high speed and etched with 37% orthophosphoric acid; group B - cavities were prepared with Er:YAG (350 mJ, 4 Hz and 112 J /cm{sup 2}) and etched with 37% orthophosphoric acid; group C - cavities were prepared with Er:YAG laser (350 mJ, 4 Hz and 112 J/cm{sup 2}), and etched with Er:YAG laser (80 mJ, 4 Hz and 25 m/cm{sup 2}). All cavities were treated with the same adhesive system and restored with flow composite according to manufacturer instructions. Teeth were submitted to thermal cycling procedures and immersed in 50% Silver Nitrate Solutions for 8 hours in total darkness. Teeth were sectioned longitudinally in the bucco-lingual direction, in slices of 1 mm thick. Each slice was immersed into photo developing solution under 16 hours of fluorescent light. Slices were photographed and microleakage was scored from 0 to 7 J by three standard examiners. Results showed statistically significant differences for group C (Er:YAG laser preparation and etching). We concluded that Er:YAG laser can be used for cavity preparation of occlusal sealing, like the conventional high speed method. However, this laser, used as enamel etching agent, could not promote an adequate surface for adhesive procedures. (author)

  10. Lasers '89

    International Nuclear Information System (INIS)

    Harris, D.G.; Shay, T.M.

    1990-01-01

    This book covers the following topics: XUV, X-Ray and Gamma-Ray Lasers, excimer lasers, chemical lasers, nuclear pumped lasers, high power gas lasers, solid state lasers, laser spectroscopy. The paper presented include: Development of KrF lasers for fusion and Nuclear driven solid-state lasers

  11. Root planing with Er:YAG laser X Gracey curette, a study in vitro in scanning electron microscopic study; Avaliacao em microscopia eletronica de varredura da superficie radicular, raspada e alisada com Er: YAG laser

    Energy Technology Data Exchange (ETDEWEB)

    Mello, Fabiano Augusto Sfier de

    2000-07-01

    The Er:YAG laser has been studied as a periodontal therapies, used to remove subgingival calculus and its bactericidal effects. The proposal of this study is to evaluate the effectiveness of the Er:YAG laser in root planing in comparison to the traditional method, not surgical. Six recently extracted due to the disease periodontal, were cut longitudinally, tends like this two half of the root. These half were separate in four groups. The first group is the natural tooth (group controls negative), the second group (group controls) was accomplished to root planing with Gracey curette. And in the third to Er:YAG laser with a contact tip, using a 45 deg angle in relation to the root; in the fourth group was scraped and planned with Er:YAG laser and complemented root planing with Gracey curette. The used energy was of 100 mJ (out put) and the frequency of 10 Hz accomplished with irrigation. The obtained results were similar in the groups 2 and 3 in comparison to the amount of smear-layer. In group 4 however, better result was obtained, because the image (SEM) was much more regular and with less amount of smear-layer. The conclusion of the work is that with the association of the laser technique and Gracey curette the results are superior to the conventional treatment. (author)

  12. Effects of the low-intensity red laser radiation on the fluoride uptake in enamel. A clinical trial; Avaliacao dos efeitos da radiacao laser de emissao vermelha em baixa intensidade na incorporacao de fluor no esmalte. Estudo clinico

    Energy Technology Data Exchange (ETDEWEB)

    Nakasone, Regina Keiko

    2004-07-01

    Fluoride has been the most important preventive method on development of the caries. This in vivo study evaluated the effects of low-intensity red laser radiation on the fluoride uptake in enamel. Ten healthy participants were recruited for this study. The two maxillary central incisors of each volunteer to be biopsied were used and divided into 4 groups: group G{sub C} (control, which was untreated; group G{sub F} (fluoride), which received topical acidulated phosphate fluoride (APF) 1,23% treatment for 4 minutes; group G{sub LF} (laser + fluoride), which was irradiated with a low-intensity diode laser ({lambda}= 660 nm and dose= 6 J/cm{sup 2}) with APF application after irradiation and group G{sub FL} (fluoride + laser), which received APF before irradiation using the same parameters as G{sub LF}. The determination of fluoride was performed using a fluoride ion electrode after an acid-etch enamel biopsy. The results show a significant increase of the fluoride uptake in enamel for groups G{sub F}, G{sub LF} and G{sub FL} when compared to control group. Although a percentage increase of 57% was observed for G{sub LF} with respect to G{sub F}, there were no statistical differences among treated groups. These findings suggest that low-intensity laser radiation used before APF could be employed in the clinical practice to prevent dental caries. (author)

  13. In vitro study of hydroxy apatite and enamel powder fused in human enamel by Nd:YAG laser; Estudo in vitro da fusao de hidroxiapatita e esmalte em superficies de esmalte humano pelo laser de Nd:YAg

    Energy Technology Data Exchange (ETDEWEB)

    Ferrreira, Marcus Vinicius Lucas

    2000-07-01

    The aim of this study was to evaluate the effects of pulsed Nd:YAG (1064 nm) laser irradiation on hydroxyapatite and enamel powder fusion. This laser beam is not well absorbed by this two compounds for this reason they were mixed with vegetal coal to increase the absorption of the laser beam. Fifteen enamel flat surfaces and six occlusal enamel surfaces were prepared with three different substances: hydroxyapatite mixed with vegetal coal (3:1 in weigh); enamel powder mixed with vegetal coal (3:1 in weigh); vegetal coal. The occlusal surfaces were utilized to determine if the compounds could seal pits and fissures. Flat surfaces were utilized to determine fusion of hydroxyapatite and enamel powder. All samples were irradiated with Nd:YAG laser with the parameters: 80 mJ, 15 Hz, 1,2 W, 100 {mu}s pulse-width, 131,1 J/cm{sup 2}. Laser beam was delivered to the samples with a 300 {mu}m diameter fiber optic. Morphology of the irradiated surfaces were examined by scanning electron microscopy (SEM). The compounds with hydroxyapatite and enamel powder were fused to enamel surfaces. Only partial pits and fissures sealing could be observed. (author)

  14. 'In vitro' study of the efficacy of diode laser and LED irradiation during dental bleaching; Estudo 'in vitro' da acao do LED e laser de diodo no clareamento dental

    Energy Technology Data Exchange (ETDEWEB)

    Barroso, Marcia Cristina da Silva

    2003-07-01

    This in vitro study evaluated the efficacy of LED and laser diode irradiation during the dental bleaching procedure, using two bleaching agents (Opalescence X-tra and HP Whiteness). The diode laser and the LED were operated in the continuous mode, with wavelength of 808 nm and 470 nm, respectively. The results of the irradiations were characterized with the CIELAB system calculating the L{sup *}a{sup *}b{sup *} values for the darkened and the bleached teeth (60 bovine incisors). This is to our knowledge the first time that light sources laser and LED are compared with respect to their whitening capability when applied to different agents. Significant differences in the chroma value are obtained for the two whitening agents and for the different light sources, too. Also, in terms of luminance, the combination of laser/ Whiteness HP showed significantly better results than when the same agent was used alone or in combination with LED. Best overall results are obtained with the combination of Whiteness HP and laser. (author)

  15. Estudo da topografia e da osseointegração de implante de titânio sob ação do LASER, com ou sem deposição de hidroxiapatita, em coelhos

    OpenAIRE

    Sisti, Karin Ellen

    2011-01-01

    Objetivo: Estudar a topografia a osseointegração de implantes de titânio sob ação do LASER de alta intensidade com e sem deposição química de hidroxiapatita, em coelhos. Método: Foram utilizados 30 coelhos albinos que receberam em suas tíbias 3 tipos de superfície de implantes: grupo controle(GI) implantes usinados, grupo(GII) irradiado LASER(Yb), e grupo irradiado e depositado hidroxiapatita pelo método biomimético(GIII). Após os períodos de avaliações (30 e 60 dias) os implantes foram subme...

  16. Nd:YAG laser in caries prevention: a clinical study; Avaliacao clinica da eficiencia do laser de Nd:YAG associado ao fluor fosfato acidulado na prevencao de caries de sulcos e fissuras de criancas e adolescentes

    Energy Technology Data Exchange (ETDEWEB)

    Boari, Heloisa Gomes Dimiranda

    2000-07-01

    The caries prevention by using laser irradiation has been investigated during the last 30 years. The Nd: YAG laser associated with acidulated phosphate fluoride has been shown as a very promising technique for enamel caries prevention. The aim of this work was to clinically evaluate the efficiency of Nd: YAG laser associated with acidulated phosphate fluoride in pit and fissure caries prevention of children and adolescents. In this work it was determined the dye that enhance the effect of Nd: YAG laser in enamel. It was selected 242 pre-molar and molar teeth from 33 children and adolescents, aged from 7 to 15 years old. The selected teeth were free from caries or decalcification marks (active white marks) to the clinical and radiographic exams. The teeth were divided into two groups: the first group was laser irradiated and their homologous remained as a control. The right side teeth were dye-assisted Nd:YAG laser irradiated. The dye solution was a moisture of dust coal and equal parts of water and alcohol. The irradiation conditions were 60 mJ/10 Hz, optical fiber in contact mode, with diameter of 300 {mu}m, resulting in an energy density of 84,9 J/cm{sup 2}. The oclusal surface of the teeth was completely irradiated, specially on the slopes and in the deepest part of the pits and fissures. This procedure was repeated three times. In the sequence it was applied the acidulated phosphate fluoride for 4 minutes. On the left side teeth - control group- only acidulated phosphate fluoride was applied for the same time. The final examination considered the presence of caries and active white marks after a period of one year. There were statistical significant differences (p < 0.01) between the lased + fluoride group and the non irradiated group. The present study concluded that the technique used in this work can be an alternative clinical method for caries prevention. (author)

  17. Effects of the low-intensity laser therapy on the prevention of dental caries induced in rats; Efeitos da radiacao laser em baixa intensidade na prevencao de carie dental induzida em ratos

    Energy Technology Data Exchange (ETDEWEB)

    Mueller, Karin Praia

    2004-07-01

    The purpose of this study was to investigate the effects of low intensity laser therapy, associated or not to an acidulated phosphate fluoride, on the prevention of dental caries induced in rats. It was used 40 wistar rats, female, weaned with 18 days, fed with a cariogenic diet during 48 days and inoculated orally with Streptococcus mutans by three consecutive days starting from the second day of the diet. On the fifth day of experiment the animals were divided into five groups: G{sub c} (control) the animas were no submitted to any treatment; G{sub L} (laser) irradiation with low power laser (GaAlAs, {lambda}=660 nm, P=30 mW, {delta}t=5 sec, 5 J/cm{sup 2}); G{sub F} (fluoride) topical application of acidulated phosphate fluoride (APF 1,23%) for four minutes; G{sub LF} (laser + fluoride) irradiation with low power laser followed by topical application of acidulated phosphate fluoride; G{sub FL} (fluoride + laser) topical application of acidulated phosphate fluoride followed by low power laser. The animals were sacrificed after 48 days; the molars were extracted and prepared to determine the dental caries lesions area by optical microscopy, enamel microhardness and analysis of the calcium and phosphorus ratio (Ca/P) by energy dispersive spectroscopy. The results were statistically analyzed by ANOVA (plaser radiation associated with acidulated phosphate fluoride reduces the caries area and could be an alternative in the prevention of the dental caries. (author)

  18. Morphological change study on root surfaces treated with curettes, sonic instruments or Er:YAG laser; Estudo in vitro da alteracao morfologica em superficie radicular tratada com curetas, aparelho ultrasonico ou com laser de Er:YAG

    Energy Technology Data Exchange (ETDEWEB)

    Guimaraes Filho, Arlindo Lopes

    2004-07-01

    Periodontal disease is caused by dental plaque and dental calculus on roots surfaces, specially on cervical areas. As dental plaque is the main cause and dental calculus a secondary one, it is practically impossible to separate one factor to the other one. In order to get periodontal tissue health it is necessary to eliminate dental plaque and calculus from root surfaces. In this sense, Er:YAG laser comes in as an excellent way to control periodontal disease, not only, by removing calculus and dental plaque but also for its bacteria reduction. The aim of this study is to compare, by S.E.M., root surfaces changing when they are treated with curettes and ultrasonic scaling or Er:YAG laser irradiation with two different energy levels of 60 mJ/pulse and 100 mJ/pulse and repetition tax of 10 Hz (in the display). It is also objective of this study to check a possible thermic damage to pulp tissue when the roots surfaces are irradiated with Er:YAG laser. We used for this study, five human dental roots, each one of them were cut into four samples, giving us a total of twenty samples, which were divided in five groups of four samples each one. The control group, we did not indicated any kind of treatment. The first group, the roots samples were scaled and planned with Gracey curettes 5/6 and 7/8. The second group, the roots samples were treated with ultrasonic instruments. The third group was irradiated with Er:YAG laser using 60 mJ/pulse , 10 Hz and energy density of 4 J/cm{sup 2} (approximated). The fourth group was irradiated with Er:YAG laser using 100 mJ/pulse, 10 Hz and energy density of 7 J/cm{sup 2} (approximated). The results analysis showed that roots scaling either with Gracey curettes or with ultrasonic instruments created smear layer covering roots surfaces; roots surfaces irradiated with Er:YAG laser showed few roughness in the third group; roots surfaces irradiated with Er:YAG laser showed no smear layer and the Er:YAG laser irradiation did not bring any

  19. Effects of low intensity laser radiation on osteointegration mechanism of implants: study 'in vivo'; Efeitos da radiacao laser em baixa intensidade no mecanismo de osseointegracao de implantes: estudo 'in vivo'

    Energy Technology Data Exchange (ETDEWEB)

    Blay, Alberto

    2001-07-01

    The purpose of this study is to determine whether the process of bone integration of implants placed in rabbit tibia is changed in any way if the region is radiated with laser, as compared to the time required for the bone integration process without radiation. Thirty adult male white New Zealand rabbits were submitted to implant surgery, for subsequent evaluation of the removal torque and resonance frequency. Each animal received two implants of pure titanium, one in each proximal metaphysics of the tibia, which were inserted with a 40 Ncm torque, and their initial stability was also monitored by means of a resonance frequency analyzer. The rabbits were then divided into 3 groups: one control group and two laser groups. The groups were evaluated in regard to removal torque and resonance frequency of the implants, after 3 and 6 weeks. One of the laser groups was radiated with a laser beam of a wavelength in the infrared range (830 nm) and the other group was radiated with a laser beam emitted in the visible range (680 nm). Ten radiation sessions were performed, 48 hours apart, the first of them during the immediate post-operation period. Radiation energy density was 4 J/cm{sup 2} per point, and there were two points at each side of the tibia. Results of the statistical analysis of the resonance frequency indicated that for both laser groups there was a significant difference between frequency values at the time of implant and the values obtained after 3 and 6 weeks. Furthermore, the results obtained for the removal torque of the three groups showed a statistically significant difference after a period of 6 weeks; removal torque values for the laser groups were, in the average, much greater than those of the control group. From these results it is possible to conclude that implants in rabbit tibia, that were exposed to laser radiation with wavelengths of 680 nm and 830 nm, had a better degree of bone integration than the control group.(author)

  20. Efeitos da terapia fotodinâmica e de uma única aplicação de laser de baixa potência em bactérias in vitro Effects of photodynamic therapy and of a sole low-power laser irradiation on bacteria in vitro

    Directory of Open Access Journals (Sweden)

    Rogério Gubert Benvindo

    2008-01-01

    Full Text Available O laser de baixa potência vem sendo usado para acelerar a cicatrização em úlceras de pressão devido a seus efeitos cicatrizante, antiinflamatório, antiedematoso e analgésico. No entanto, não há consenso quanto a seu efeito em úlceras infectadas. O objetivo deste estudo foi verificar o efeito bactericida da laserterapia e da terapia fotodinâmica (TFD com laser de baixa potência, InGaP, 670 nm, em doses de 2, 4 e 6 J/cm², em bactérias gram-positivas e gram-negativas in vitro. Foram preparadas 32 placas de Petri com bactérias, 16 com Pseudomonas aeruginosa e 16 com Staphilococcus aureus. Aleatoriamente dividiu-se cada grupo em oito subgrupos (duas placas cada: três subgrupos tratados só com laserterapia, em doses de 2 J/cm², 4 J/cm² e 6 J/cm²; três subgrupos tratados com TFD, em doses de 2 J/cm², 4 J/cm² e 6 J/cm²; um tratado apenas com fotossensibilizante (azul de metileno a 0,1 µg/ml; e um subgrupo não tratado (controle. Os subgrupos laser e TFD foram irradiados uma única vez e incubados por 24 horas. Os outros dois subgrupos não receberam irradiação. As culturas foram analisadas visualmente para verificação ou não do halo de inibição. Em todos os subgrupos, de ambas as bactérias, não foi observado qualquer halo de inibição nem de crescimento. Conclui-se que a terapia a laser e a fotodinâmica de baixa potência (InGaP, 670 nm não produziram efeitos bactericidas e/ou bacteriostáticos, tampouco tendo havido efeito bioestimulante sobre as bactérias.Low-level laser therapy has been used to speed up healing process of pressure ulcers due to its antiinflammatory, analgesic, anti-edematous, and scarring effects. However there is no consensus on its effect on infected ulcers. The aim of this study was to verify the bactericidal effect of low-level laser therapy (InGaP, 670 nm and photodynamic therapy (PDT at 2, 4 and 6 J/cm² doses, onto gram-negative and gram-positive bacteria in vitro. Thirty two Petri plates

  1. The influence of low-level laser therapy on biomodulation of collagen and elastic fibers A influência da terapia a laser de baixa densidade de energia na biomodulação das fibras colágenas e elásticas

    Directory of Open Access Journals (Sweden)

    Lívia Souza Pugliese

    2003-12-01

    Full Text Available The study of low-level laser therapy upon extracellular matrix elements is important to understand the wound healing process under this agent. However, little is known about the interference of laser light in relation to collagen and elastic fibers. Cutaneous wounds were performed on the back of 72 Wistar rats and a Ga-Al-As low-level laser was punctually applied with different energy densities. The animals were killed after 24, 48, 72 hours and 5, 7 and 14 days. Tissues were stained with hematoxilin-eosin, sirius red fast green and orcein and then analyzed. It was observed that the treated group exhibited larger reduction of edema and inflammatory infiltrate. The treated animals presented a larger expression of collagen and elastic fibers, although without statistical significance (p > 0.05. Treatment with a dosage of 4 J/cm² exhibited more expressive results than that with 8 J/cm². In this study, the authors concluded that low-level laser therapy contributed to a larger expression of collagen and elastic fibers during the early phases of the wound healing process.O estudo da terapia a laser de baixa densidade de energia sobre os diversos constituintes da matriz extracelular é crucial para o entendimento do processo cicatricial sob esse agente. Todavia, pouco se sabe sobre a interferência do laser em relação às fibras colágenas e elásticas. Realizaram-se ferimentos cutâneos padronizados no dorso de setenta e dois ratos Wistar e, em seguida, aplicação pontual do raio laser de baixa potência do tipo Arseneto de Gálio-Alumínio (Ga-Al-As com diferentes densidades de energia. Os animais foram sacrificados com 24, 48 e 72 horas e aos 5, 7 e 14 dias. Procedeu-se à análise das secções teciduais coradas por hematoxilina-eosina, sírius vermelho e orceína. Observou-se, que nos grupos submetidos à terapia a laser, houve maior redução do edema e infiltrado inflamatório. Os animais tratados apresentaram uma maior expressão de fibras

  2. Marginal microleakage in vitro study on class V cavities prepared with Er:YAG laser and etched with acid or etched with Er:YAG laser and acid; Estudo in vitro da microinfiltracao marginal em cavidades classe V preparadas com laser de Er:YAG e condicionadas com acido ou com laser de Er:YAG e acido

    Energy Technology Data Exchange (ETDEWEB)

    Tavares, Henrique Dutra Simoes

    2001-07-01

    Microleakage at the interface between the teeth and the restorative materials remains a problem with composite resin restorations. Microleakage at the gingival margins of class V cavities restorations still challenge as they are usually placed in dentin and/or cementum. Previous studies have shown that the cavity preparation with Er:YAG laser is possible. It has been reported that Er:YAG laser has ability to create irregular surface providing micromechanical retention for adhesive dental restorative materials and to improve marginal sealing. The purpose of this in vitro study was to evaluate the marginal microleakage on class V cavities prepared with Er:YAG laser and etched with acid or with Er:YAG laser and acid, in compared to those prepared and etched conventionally. Thirty human molars were divided into three groups, namely: group I - prepared with Er:YAG laser (KaVo KEY Laser II - Germany) and etched with 37% phosphoric acid; group II - prepared with Er:YAG laser and etched with Er:YAG laser and 37% phosphoric acid; group III (control group) - prepared with high speed drill and etched with 37% phosphoric acid. All cavities were treated with same adhesive system (Single Bond - 3M) and restored with the composite resin (Z100 - 3M), according to the manufacturer's instructions. The specimens were stored at 37 deg C in water for 24 hours, polished with Sof-Lex discs (3M), thermally stressed, sealed with a nail polish coating except for the area of the restoration and 1 mm around it, and immersed in a 50% aqueous solution of silver nitrate for 24 hours. After that, the specimens were rinsed in water, soaked in a photodeveloping solution and exposed to a fluorescent light for 8 hours. The teeth were embedded in an autopolymerizing resin and sectioned longitudinally using a diamond saw microtome under running water. The sections were photographed. The microleakage at the occlusal cavity and at the gingival margins of each specimen was evaluated with scores (0-3) by

  3. Marginal microleakage in vitro study on class V cavities prepared with Er:YAG laser and etched with acid or etched with Er:YAG laser and acid; Estudo in vitro da microinfiltracao marginal em cavidades classe V preparadas com laser de Er:YAG e condicionadas com acido ou com laser de Er:YAG e acido

    Energy Technology Data Exchange (ETDEWEB)

    Tavares, Henrique Dutra Simoes

    2001-07-01

    Microleakage at the interface between the teeth and the restorative materials remains a problem with composite resin restorations. Microleakage at the gingival margins of class V cavities restorations still challenge as they are usually placed in dentin and/or cementum. Previous studies have shown that the cavity preparation with Er:YAG laser is possible. It has been reported that Er:YAG laser has ability to create irregular surface providing micromechanical retention for adhesive dental restorative materials and to improve marginal sealing. The purpose of this in vitro study was to evaluate the marginal microleakage on class V cavities prepared with Er:YAG laser and etched with acid or with Er:YAG laser and acid, in compared to those prepared and etched conventionally. Thirty human molars were divided into three groups, namely: group I - prepared with Er:YAG laser (KaVo KEY Laser II - Germany) and etched with 37% phosphoric acid; group II - prepared with Er:YAG laser and etched with Er:YAG laser and 37% phosphoric acid; group III (control group) - prepared with high speed drill and etched with 37% phosphoric acid. All cavities were treated with same adhesive system (Single Bond - 3M) and restored with the composite resin (Z100 - 3M), according to the manufacturer's instructions. The specimens were stored at 37 deg C in water for 24 hours, polished with Sof-Lex discs (3M), thermally stressed, sealed with a nail polish coating except for the area of the restoration and 1 mm around it, and immersed in a 50% aqueous solution of silver nitrate for 24 hours. After that, the specimens were rinsed in water, soaked in a photodeveloping solution and exposed to a fluorescent light for 8 hours. The teeth were embedded in an autopolymerizing resin and sectioned longitudinally using a diamond saw microtome under running water. The sections were photographed. The microleakage at the occlusal cavity and at the gingival margins of each specimen was evaluated with scores (0

  4. Clinical and morphologic evaluation of Er:YAG laser action at the front of cervical dentinal hypersensitivity; Avaliacao clinica e morfologica da acao do laser de Er:YAG frente a hipersensibilidade dentinaria cervical

    Energy Technology Data Exchange (ETDEWEB)

    Rocha, Dalva Maria

    2001-07-01

    This work was achieved in vivo and in vitro to evaluate the efficiency of Er:YAG laser in the cervical dentinal hypersensitivity treatment (HSDC). The Clinical study was achieved in patients with HSDC. The treatment was realized in five sessions: the first for selection, the second for exams (clinic and X-Ray) and trying to remove the etiologic factors that could cause the HSDC. The third and fourth sessions were subjected to the radiation with that protocol: 60 mJ energy ,2 Hz frequency, 6 mm out of focus, under air cooling, 20 seconds each application which the same was repeated four times with one minute breaks, which scanning movements and without using anaesthetics. The fifth was evaluation. The patients were evaluated and registered in a subject scale of pain 0 to 3, in the beginning and end of each session of irradiation, and one month after the last session. The results showed that for the irradiated group occurs significant differences in the beginning of each session and between. For the control group did not occur significant differences in the beginning and after each session, but did show a difference between the sessions. As the control group as the irradiated group, had reduction of sensibility between the session. For the morphologic study nine teeth were selected, 7 molars and 2 pre-molars from operative dentistry discipline. Half of the surface was irradiated with Er:YAG laser, the same protocol used in vivo, and the other half was used as a control without receiving any laser irradiation. Subsequently, specimens were prepared for SEM examinations. The results showed that laser treated surfaces showed a reduction of dentine tubular diameter with partial or total closure of the dentine tubules. For the control group, it was observed bigger amounts smear layer and open dentine tubular. The results obtained indicated that the Er:YAG laser can contribute to the HSDC treatment. (author)

  5. Comparative study in swines' vocal cords healing after excision of fragment with CO2 laser with mitomycin and 5-fluorouracil postoperative topical application Estudo comparado da cicatrização da prega vocal de suínos após exérese de fragmento com laser de CO2 e aplicação tópica pós-operatória de mitomicina e 5-fluorouracil

    Directory of Open Access Journals (Sweden)

    Eduardo Baptistella

    2009-02-01

    Full Text Available PURPOSE: To evaluate the deposition of collagen fibers at pig's vocal folds after topical use of mitomycin or 5-fluorouracil, when partial exeresis of mucosa layer had been promoted by CO2 laser. METHODS: There were used 18 Larger white pigs which were anesthetized and submitted to mucosa fragment's exeresis, bilaterally, at its free border. The animals were divided into 3 groups, each one with 6 animals: control group, without topical drug application; mitomycin group; and 5-fluorouracil group. After 30 days, the animals were subjected to euthanasia, and samples of the vocal folds were collected and stained by picrosirius red technique with polarization for quantification of total collagen deposition. RESULTS: In control group, the mean rate of right vocal fold's collagen deposition at submucosa consisted in a 3428.66 micrometers area. There was found an area whose size had, in average, 2196.36 micrometers, in mitomycin group, and 2269.19 micrometers, in 5-fluorouracil group. CONCLUSION: Mitomycin and 5-fluorouracil had promoted beneficial change in vocal fold's cicatrization with less collagen deposition, but there was no significant statistically difference when they were compared between themselves.OBJETIVO: Avaliar a deposição das fibras de colágeno total em pregas vocais suínas após o uso tópico de mitomicina ou 5-fluorouracil nas exéreses parciais de mucosa com laser de CO2. MÉTODOS: Foram utilizados 18 porcos da raça Larger white anestesiados e submetidos à exérese de fragmento de mucosa de borda livre da prega vocal direita e prega vocal esquerda. Os animais foram divididos em 3 grupos com 6 animais cada: grupo controle, sem aplicação de medicação tópica; grupo mitomicina, com uso tópico dessa substância; grupo 5-fluorouracil, uso tópico. Após 30 dias do experimento os animais foram submetidos à eutanásia, coletadas amostras das pregas vocais e coradas pela técnica do picrosirius red com polarização para a

  6. \\"Avaliação da desinfecção da dentina radicular em profundidade provocada pela irradiação do laser de diodo de alta potência\\"

    OpenAIRE

    Eliana Barbosa de Souza

    2007-01-01

    A presença de microrganismos no interior do sistema de canais radiculares é a principal causa do fracasso na terapia endodôntica. A importância da sanificação durante o preparo do canal fica clara, portanto. Dentre os microrganismos isolados nos casos de insucesso o Enterococcus faecalis é comumente encontrado. O E. faecalis é um microrganismo resistente à terapia endodôntica, à medicação intracanal de hidróxido de cálcio e sua presença contribui para o insucesso em Endodontia. A radiação las...

  7. A efetividade do laser de HeNe 632,8 nm no reestabelecimento da integridade dos tecidos cutâneos em animais experimentais: revisão sistemática Effectiveness of HeNe 632.8 nm laser on skin tissue integrity repair in experimental animals: a systematic review

    Directory of Open Access Journals (Sweden)

    Clarissa Tôrres Leal

    2012-09-01

    Full Text Available O objetivo desta revisão sistemática foi analisar o efeito do laser de HeNe na cicatrização de feridas em ratos. Foram selecionados estudos experimentais que adotaram o laser HeNe para o tratamento de feridas agudas em ratos adultos saudáveis, com lesões induzidas por bisturi, nas bases de dados PubMed/MEDLINE, LILACS e SciELO. Foram utilizados os seguintes descritores: cicatrização de feridas e colágeno, de acordo com o MeSH e o DeCS, além dos unitermos laser HeNe e reparação da pele e seus equivalentes em inglês e espanhol. Três estudos foram incluídos na revisão sistemática, não sendo possível a realização de metanálise, devido à impossibilidade de comparação entre as metodologias dos estudos selecionados. Todos os estudos realizaram análise por meio de cortes histológicos das cicatrizes. A presença de falhas metodológicas nos três artigos dificultou a interpretação fidedigna dos dados encontrados. Os estudos destacaram uma redução na intensidade da resposta inflamatória e uma melhor organização das fibras colágenas no grupo irradiado. A terapia com laser HeNe mostrou boa resposta no reparo tecidual. No entanto, tais resultados devem ser analisados de modo criterioso, uma vez que há presença de heterogeneidade, principalmente em relação aos parâmetros adotados.The aim of this systematic review was to analyze the effect of HeNe laser on wound healing in rats. Experimental studies that adopted HeNe laser as a treatment of acute lesions in healthy adult rats were selected, with scalpel-induced lesions, at PubMed/MEDLINE, LILACS, and SciELO databases. The following keywords were used: wound healing and collagen, according to MeSH and DeCS, besides the terms HeNe laser and skin repair, and their equivalent in Portuguese and Spanish. Three studies were included in this systematic review, but it was not possible to perform a metanalysis, due to impossibility to compare methods of the selected studies. All

  8. Avaliação da camada de fibras nervosas na retinopatia diabética tratada por panfotocoagulação com laser de argônio Examination of the retinal nerve fiber layer in diabetic retinopathy treated by argon laser panphotocoagulation

    Directory of Open Access Journals (Sweden)

    Otacílio de Oliveira Maia Júnior

    2008-04-01

    Full Text Available OBJETIVO: Avaliar alterações na camada de fibras nervosas da retina na retinopatia diabética tratada por panfotocoagulação com laser de argônio. MÉTODOS: Estudo prospectivo de portadores de retinopatia diabética submetidos a panfotocoagulação retiniana. Inicialmente, foram realizados exame oftalmológico completo e tomografia de coerência óptica. Todos pacientes foram submetidos a panfotocoagulação em um dos olhos. A camada de fibras nervosas foi avaliada por meio da tomografia de coerência óptica na 1ª semana, no primeiro, terceiro e sexto meses do tratamento. RESULTADOS: A amostra foi composta por 27 pacientes (27 olhos portadores de diabetes mellitus tipo 2. A idade variou entre 41 e 64 anos (média de 53,7 ± 6,2 anos, sendo 10 (37% pacientes do sexo masculino e 17 (63% do feminino. Quanto ao tipo de retinopatia, 22,2% apresentavam RD proliferativa e 77,8%, RD não proliferativa muito grave. Houve aumento significante nas medidas da espessura da camada de fibras nervosas, permanecendo nos setores temporal, 3 e 4 horas após seis meses de seguimento. Não foi observada qualquer redução na espessura em todos parâmetros analisados. CONCLUSÃO: Não foi evidenciada, a curto e médio prazo, redução na espessura da camada de fibras nervosas em portadores de retinopatia diabética tratada por panfotocoagulação que possa ser identificável por meio da tomografia de coerência óptica. Por outro lado, alguns setores mostraram aumento na espessura durante o seguimento.PURPOSE: To evaluate the alterations in the retinal nerve fiber layer in diabetic retinopathy treated by argon laser panphotocoagulation. METHODS: Prospective study of patients with diabetic retinopathy submitted to retinal panphotocoagulation. Initially, complete ophthalmologic examination and optical coherence tomography were performed. All patients were submitted to panphotocoagulation with argon laser in one of the eyes. The retinal fiber layer was evaluated

  9. Estudo morfométrico e morfológico da cicatrização após uso do laser erbium: YAG em tecidos cutâneos de ratos Morphometrical and morphological study of cicatricial effects caused by application of laser erbium: YAG on the skin of rats

    Directory of Open Access Journals (Sweden)

    Lúcia de Noronha

    2004-02-01

    Full Text Available Este trabalho analisa o efeito da reparação cutânea do laser erbium:yttrium aluminunn garnet (YAG (Er:YAG em pele de ratos através de estudo histológico e morfométrico. Tatuaram-se duas figuras no dorso de cada animal (n = 35, denominadas controle e experimento. Na figura experimento, aplicaram-se três passadas de laser Er:YAG com parâmetros padronizados. Cinco animais foram eutanasiados nos dias 0, 7, 14, 28, 56, 84 e 112 de pós-operatório. O estudo histológico demonstrou no dia 0 dano de ablação médio de 215,24 micrômetros (mm, sendo homogêneo com vaporização da epiderme e porções superficiais da derme. O dano térmico residual foi pequeno (média de 41,45mm, observando-se áreas onde estava praticamente ausente. A fibroplasia cicatricial já estava presente no dia 7 (média de 55,58mm, aumentando rapidamente até o dia 28 (média de 209,49mm, quando atingiu um platô e se manteve até o dia 112. Não houve sinais de processo inflamatório agudo no dia 7 e a reepitelização já estava completa. Concluiu-se que a aplicação de laser na pele de ratos induz reparação cutânea ao longo de 112 dias nas condições do experimento.This study analyses the skin contracture effect of the erbium:YAG (Er:YAG laser on the skin of rats by light microscopic histological and morphometrical evaluations. Two squares of back skin were precision tattooed on each of the animals (n = 35, that were termed control and experimental skin. The experimental skin was treated with three passes of the Er:YAG laser with standardized parameters. Five animals were killed and skin specimens were analyzed at 00, 07, 14, 28, 56, 84 and 112 days. Histologic examination demonstrated a mean of 215.24 micrometers ablative damage that was homogeneous with complete vaporization of the epidermis and superficial dermis. The residual thermal damage was small (mean of 41.45 micrometers observing areas where it was absent. The cicatritial fibroplasy was present at

  10. Assessment of the bacteria reduction in the infected root canal irradiated with diode laser; Avaliacao da reducao bacteriana em conduto radicular infectado e irradiado com laser de diodo. Estudo in vitro

    Energy Technology Data Exchange (ETDEWEB)

    Radaelli, Claudia Amaral Rabello de Mello

    2002-07-01

    High success rates are achieved in conventional endodontic treatment of vital pulp teeth. However, in cases of non-vital pulp, a decrease in the rate of success occurs due to difficulties in achieving a complete disinfection of the root canals system. Some bacteria, such as Enterococcus faecalis, are frequently found in cases of endodontic treatment failure due to their high resistance to the conventional endodontic treatment. The aim of this study was to evaluate the efficiency of a high power diode laser irradiation in bacterial reduction of contaminated canals associated with dressing compose by calcium hydroxide paste propylene glycol and camphorated paramonochlorophenol. Eighty-two root canals were infected in vitro with Enterococcus faecalis in a concentration of 1x10{sup 8} CFU/ml. Specimens were high intensity irradiated with a diode laser model Opus 10, at a wavelength of 830 nm. Two different parameters were employed in continuous mode: 3 W and 2,5 W with a 360 {mu}m optical fiber at an angle of approximately 5 degrees respect to the dentine surface during 5 seconds, in 4 applications, with 20 seconds intervals among them. After these proceedings specimens were vortexed in peptone water and dilutions performed. Aliquots of the dilution were plated on m-Enterococcus agar, incubated, and the Colonies Forming Units (CFU) of ali groups was counted. The results showed a significant reduction of bacteria on ali groups after laser irradiation. A high reduction rate was achieved: 98.5% immediately after the laser irradiation; 48 hours after, the reduction was of 96,73% and, finally, a 100% reduction was achieved through the combination of laser irradiation and a long lasting dressing of calcium hydroxide paste, propylene glycol and camphorated paramonochlorophenol. High rates of bacteria reduction were achieved using the parameter of 3 W in continuous mode with the power of 2,9473 KW/cm{sup 2}. The temperature was monitored with a K-pipe thermocouple placed at

  11. Evaluation of the temperature rise in pulp chamber during class V preparation with Er:YAG laser; Avaliacao da temperatura na camara pulpar durante preparo classe V com laser de Erbio:YAG

    Energy Technology Data Exchange (ETDEWEB)

    Picinini, Leonardo Santos

    2001-07-01

    One of the major concerns regarding laser irradiation in the dentistry field is the overheating in dental tissue, specially pulpal tissue. A temperature raise over 5.5 deg C is considered to be harmful to its vitality. The current study evaluated the temperature increase in the pulp chamber, during class V preparation, performed with the laser Er:YAG in 36 bovine incisive extracted teeth. The samples were eroded on the outer side of the vestibular wall to obtain the dentinal thickness of 2.0 mm (group I), 1.0 mm (group II) and 0.5 mm (group III). Thermocouples were fixed to the inner part of the vestibular wall using thermal paste, through the palatine opening of the samples. Class V cavities were prepared in the vestibular side only in 1 mm{sup 2} thick dentins. Irradiation parameters used were: 500 mJ/10 Hz, 850 mJ/10 Hz and 1 000 mJ/10 Hz for all the groups. The results were processed by a microcomputer. This study showed that the temperature increased into the pulpal cavity reached around 3 deg C for the groups I (2,0 mm thick dentine) and II (1.0 mm thick dentine). In the group III (0.5 mm thick) temperature was around 5.5 deg C. Thus, the parameters used for cavity preparation, using Er:YAG laser, were safe in relation to the temperature raise for dentinal thickness of 1,0 and 2,0 mm; in 0.5 mm thick dentins, temperature increase reached 5.5 deg C and an appropriate correction in the laser parameters was necessary. (author)

  12. Evaluation in vitro of pulpal chamber temperature of deciduous teeth during Er:YAG laser application; Avaliacao in vitro da temperatura na camara pulpar de dentes deciduos durante aplicacao do laser de Er:YAG

    Energy Technology Data Exchange (ETDEWEB)

    Sznajder, Alexandre Joseph

    2001-07-01

    The Er:YAG laser technology has been thoroughly studied, since its invention, and has been increasingly recommended in Dentistry. However, its use in deciduous teeth has not been deserving the equivalent attention to its counterpart in permanent teeth, despite of the deciduous teething occur in a phase of life in which it has a far more importance than its substitutes. For that reason, this study aims to identify the suitable parameters to the clinic procedures in deciduous teeth, using the already established protocols in permanent teeth. The study was lead in a way to resemble the most the conditions of the clinical use of the laser. Five groups were analyzed using different energy densities and repetition rates. Each group was composed of 10 first superior right deciduous molars randomly selected. The energy densities and repetition rates used for each group were: 60 mJ 15 Hz, 250 mJ 2 Hz, 250 mJ 15 Hz, 400 mJ 6 Hz and 500 mJ 2 Hz. The results obtained allowed us to conclude that the use of the Er:YAG laser in Odontopediatrics is effective, safe and secure and the main reason for its recommendation is the low transfer of heat to the adjacent tissues of the applied surfaces. (author)

  13. Análise de Fourier para detecção de defeitos localizados na camada de fibras nervosas da retina com a polarimetria a laser Fourier analysis for the detection of localized nerve fiber layer defects using scanning laser polarimetry

    Directory of Open Access Journals (Sweden)

    Felipe Andrade Medeiros

    2003-12-01

    Full Text Available OBJETIVO: Avaliar a utilidade da análise de Fourier como método para detecção de defeitos localizados na camada de fibras nervosas da retina (CFN, utilizando as medidas obtidas com a polarimetria de varredura a laser. MÉTODOS: O estudo incluiu 40 olhos de 40 pacientes com glaucoma apresentando defeitos localizados na CFN detectados à oftalmoscopia e/ou em fotografias da camada de fibras nervosas. O grupo controle foi constituído por 43 olhos de 43 pacientes normais, sem antecedente de pressão intra-ocular elevada ou glaucoma, e com exame normal da CFN e disco óptico. Todos os pacientes foram submetidos a exame da CFN utilizando o aparelho GDx® - Nerve Fiber Analyzer. Para comparação entre os grupos, foram utilizados os parâmetros fornecidos pelo software do aparelho e medidas provenientes dos coeficientes obtidos pela análise de Fourier da curva de distribuição dos valores de espessura da CFN. As várias medidas dos coeficientes de Fourier foram combinadas numa função linear discriminante de maneira a encontrar a combinação que resultasse na melhor separação entre pacientes glaucomatosos com defeitos localizados e os sujeitos normais. Curvas ROC foram construídas para cada medida e valores de sensibilidade para especificidades fixas foram calculados. RESULTADOS: Os parâmetros fornecidos pelo software do GDx mostraram baixo poder de diferenciação entre os pacientes normais e com defeitos localizados na CFN, com sensibilidades variando de 15 a 48% (com especificidade a 91%. Para a mesma especificidade de 91%, a combinação dos coeficientes de Fourier teve sensibilidade de 80%. A área sob a curva ROC para a combinação dos coeficientes de Fourier (0,90 foi significativamente superior à obtida para o parâmetro The Number (0,76. CONCLUSÃO: A análise de Fourier resultou em melhora na capacidade do GDx de detectar defeitos localizados na CFN em relação aos parâmetros fornecidos pelo software do aparelho.PURPOSE: In

  14. Nd:YAG laser associated with metal salts solutions in the treatment of dentinal hypersensitivity; O laser de Nd:YAG associado a solucoes de sais metalicos no tratamento da hipersensibilidade dentinaria

    Energy Technology Data Exchange (ETDEWEB)

    Glauche, Carlos Eugenio Correia

    2001-07-01

    The objective of this study was to observe the ultrastructural changes caused by the radiation of Nd:YAG laser on the tooth tissue and determine qualitatively the presence of Sn{sup ++}, Sr{sup ++} and F{sup -}, inside the dentin, being it irradiated or not. Ten molar teeth recently extracted were cut into 2 mm discs. The samples were soaked in a EDTA solution at 17% for 2 minutes and divided into five groups. Group I: the samples were irradiated with Nd:YAG laser (1,5 W, 100 mJ, 15 Hz, 150 {mu}s and 125 J/cm{sup 2}) and after that, a treatment with an SnF{sub 2} aqueous solution at 10% for 30 minutes. Group II: the samples got laser irradiation with the same parameters and then a treatment with an SrCl{sub 2} solution at 10% as a toothpaste (Sensodyne{sup TM}) for 30 minutes. Group III: the samples just got a treatment with a SnF{sub 2} aqueous solution at 10% for 30 minutes. Group IV: the samples just got a treatment with a SrCl{sub 2} toothpaste (Sensodyne{sup TM}) for 30 minutes. Group V: samples that just got laser irradiation in the parameters above mentioned. Then, all samples were prepared for scanning electronic microscopy (SEM) and the samples of groups I, II, III and IV for energy dispersive X-ray microanalysis (EDX). The ultrastructure aspect of the dentin showed the surface totally altered by the irradiation. Pits and whitish globules were found amidst an heterogenous and rough structure, due to the melting and resolidification of the dental structure. Craters were also observed. Carbonization areas were absent. Ions Sn{sup ++} were found at a depth of 250 {mu}m in the samples of group I (Nd:YAG + SnF{sub 2}), whereas in the samples of group III, Sn{sup ++} were not found deeper than 100 {mu}m. Sr{sup ++} could be detected at least at 500 {mu}m in the inner dentin in the samples of group II (Nd:YAG + SrCl{sub 2}). However, Sn{sup ++} were not found at 50 {mu}m in group IV samples. Ions F{sup -} were just found in the irradiated samples of group I

  15. Marginal microleakage evaluation in class V composite restorations of deciduous teeth prepared conventionally and using Er:YAG laser; Avaliacao da microinfiltracao marginal em cavidades classe V de dentes deciduos preparados com laser Er:YAG e alta rotacao

    Energy Technology Data Exchange (ETDEWEB)

    Pulga, Neusa Vieira Galvao

    2001-07-01

    The evaluation of marginal microleakage in class V restorations of deciduous teeth prepared using Er:laser and comparison to the ones observed when conventionally prepared, using two photopolimerizable materials, composite resin and glass ionomer cement, was the subject of this study. Twenty eight complete deciduous teeth were divided into four groups Group 1 (G1) prepared with high speed drill + composite resin; Group 2 (G2) prepared with high speed drill + glass ionomer cement; Group 3 (G3) prepared using Er:YAG laser (2.94 {mu}m), 300 mJ, 3 Hz, handpiece 2051, energy density 86 mJ/cm{sup 2} + composite resin; Group 4 (G4) prepared using Er:YAG laser (2.94 {mu}m), 300 mJ, 3 Hz, handpiece 2051, energy density 86 J / cm{sup 2} + glass ionomer cement. After the preparation and restoration the specimens where stored at 37 deg C for 24 hours, thermally stressed, immersed in 50% aqueous solution of silver nitrate for 24 hours while kept in the dark. The specimens were rinsed in water, soaked in photodeveloping solution and exposed to fluorescent light for 6 hours. After this process the samples were sectioned and observed by stereomicroscopy. For comparison the groups were divided into occlusive and cervical microleakage. The results were analysed under the Kruskal-Wallis test. For the occlusive microleakage the statistical significance was 5% among the groups and the average comparison showed higher microleakage for G1 (M=35.1) than for G2 (M=24.0) as well as compared to G3 (M=22.3). The other groups did not present statistical differences among them. For the cervical microleakage the Kruskal-Wallis test did not present any statistical difference. Comparing the occlusive and cervical microleakage data, for every group, using the Wilcoxon test, no statistical differences were observed. Concluding, this study showed the Er:YAG laser to be effective for class V restorations and to result in a smaller microleakage degree using the composite resin. These results indicate

  16. Calibration of semiconductors diodes for in vivo dosimetry in total body irradiation treatments; Calibracao de diodos semicondutores para dosimetria in vivo em tratamentos de irradiacao de corpo inteiro

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Fernanda F.; Costa, Alessandro M.; Ghilardi Netto, Thomaz, E-mail: ferretti.oliveira@gmail.com [Universidade de Sao Paulo (FFCLRP/USP), Ribeirao Preto, SP (Brazil). Faculdade de Ciencias e Letras. Departamento de Fisica; Amaral, Leonardo L. [Universidade de Sao Paulo (HCFMRP/USP), Ribeirao Preto, SP (Brazil). Hospital das Clinicas. Servico de Radioterapia

    2012-08-15

    This paper presents the results of in vivo dosimetry with p-type semiconductors diodes, EDP-15 (Scanditronix Wellhoefer) of two patients who underwent total body irradiation treatments, at Hospital das Clinicas da Faculdade de Medicina de Ribeirao Preto University of Sao Paulo (HCFMRP-USP). The diodes were well calibrated and the calibration factors were determined with the aid of a reference ionization chamber (FC065, IBA dosimetry, sensitive volume of 0.65 cm{sup 3}).The calibration was performed in a Total Body Irradiation (TBI) setup, using solid water phantoms. Different lateral thicknesses from one patient were simulated and then the calibration factors were determined by means of maximum depth dose readings (half of the lateral thickness). The response difference between diode readings and the prescribed dose for both treatments was below 4%. This difference is in agreement as recommended by International Commission on Radiation Units (ICRU), which is {+-}5%. (author)

  17. Laser Technology.

    Science.gov (United States)

    Gauger, Robert

    1993-01-01

    Describes lasers and indicates that learning about laser technology and creating laser technology activities are among the teacher enhancement processes needed to strengthen technology education. (JOW)

  18. Evaluation of low intensity laser effects in the thyroid glands region of male mice; Avaliacao dos efeitos do laser em baixa intensidade na regiao da glandula tireoide de camundongos

    Energy Technology Data Exchange (ETDEWEB)

    Azevedo, Luciane Hiramatsu

    2002-07-01

    Recent studies have demonstrated that the infra-red laser can cause alterations in thyroid glands. Their normal activity must be preserved, as they produce the thyroidal hormones triiodothyronine (T{sub 3}) and thyroxine (T{sub 4}), that stimulate the oxidative metabolism, essential to maintain a healthy organism. The increase or diminution of these hormones results in alteration of the mitochondria's activity, that determines the secondary effects in the metabolism. The purpose of this study was to evaluate if there was any alteration of the thyroidal hormones plasma levels under irradiation from infra-red laser, with energy density of 4J/cm{sup 2}, in the region of thyroid glands of male mice. It was concluded that there was an hormonal level alteration statistically significant between the first day of irradiation and seven days after the last application. Histological studies showed that there was no morphological changes in histological sections of thyroid glands. The optical absorption spectroscopy of mice's serum presented a peak at approximately 280 nm, attributed to tyrosine (this is the amino acid compounding these hormones). (author)

  19. Survey of insect fauna from plants medicinal, aromatic and seasoning and disinfestation by the process of radiation; Levantamento da entomofauna de plantas medicinais, aromaticas e condimentares e desinfestacao pelo processo de irradiacao

    Energy Technology Data Exchange (ETDEWEB)

    Reis, Fabricio Caldeira

    2013-07-01

    The present study aimed to survey the insect fauna associated with medicinal plants, aromatic dehydrated and seasoning trade in Sao Paulo city, using different doses of gamma radiation with the aim of disinfestation of the material and determine the lethal dose of gamma radiation on Sphaericus gibboides. From April to May 2011 were collected in 10 establishments the following sample materials: Melissa officinalis L. (Lemongrass), Mentha piperita L. (Mint), Ocimum basilicum L. (Basil), Origanum vulgare L. (Oregano), Rosmarinus officinalis L. (Rosemary), Thymus vulgaris L. (Thyme), Senna alexandrina Mill (senna), Coriandrum sativum L. (Coriander), Petroselinum crispum (Mill.) Fuss (salsa) and Pimpinella anisum L. (Fennel), Baccharis trimera (Less.) DC. (Gorse), Chamomilla recutita L. (= M. recutita L.) (chamomile), Laurus nobilis L. (Blonde) (Lauraceae); Capsicum annuum L. (Sweet paprika), Bixa orellana L. (Spice) (Bixaceae) and Peumus boldus Molina (Boldo). The first screening showed that all the tested materials did not show the presence of adult insects. After 45 days 940 adult insects were found and larvae from eggs. The substrates analyzed Chamomilla recutita showed the highest rate of infestation, with 70,6%. Pelmus boldus, Laurus nobilis, Chamomilla recutita and Capsicum annuum, had the highest species diversity. Baccharis trimera, Bixa orellana, Melissa officinalis, Origanum vulgare and Coriandrum sativum showed no infestation. The species was Lasioderma serricorne the insect with the largest number of individuals found (936), higher percentage of infestation in different materials (62.5%) and lots, and highest occurrence (68,75%) materials (M. piperita, S. alexandrian, P. anisum, Chamomilla recutita, P. crispum, L. nobilis, C. sativum, C. annuum, O. basilicum, P. boldus and T. vulgaris). The following materials were selected for testing disinfestation by irradiation process: Bixa orellana, Capsicum annuum, Cassia angustifolia, Coriandrum sativum, Mentha piperita, Petrosolium sativum, Chamomilla recutita. The materials were infested with adults of L. serricorne and S. gibboides, divided into 5 portions of 30g with 20 individuals each. Using multipurpose irradiator Cobalt-60 dose rate during the tests of 6 kGy/h, the plots were subjected to increasing doses of gamma radiation of 0 (control), 0,25; 0,50; 0,75; 1,00; 1,25; 1,50; 1,75 and 2,00 kGy. The determination of the lethal dose for adults S. gibboides, proceeded radiating 4 replicates per treatment each containing 25 individuals. The doses used were: 3,0; 2,8; 2,6; 2,4; 2,2; 2,0; 1,8; 1,6; 1,4; 1,2; 1,0; 0,8; 0,6 kGy. The lowest dose at no emergence of adult L. serricorne and S. gibboides in all materials tested was to 0,25 kGy. We did not observe the presence of other adults in increasing doses. It was observed that the materials acquired in trade showed different percentages of infestation thus justifying the application of control methods. Using multipurpose irradiator Cobalt-60 with dose rate of 6 kGy was effective in controlling L. serricorne and S. gibboides at a dose of 0,25 kGy. The dose of 2,2 kGy reached 100% mortality for adults of S. gibboides. (author)

  20. Influence of free radicals generated by gamma irradiation on the trehalose levels in Saccharomyces boulardii leaven cells; Influencia de radicais livres gerados pela irradiacao gama nos niveis de trealose em celulas da levedura Saccharomyces boulardii

    Energy Technology Data Exchange (ETDEWEB)

    Martins, Flaviano dos Santos; Vianna, Cristina Roscoe [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN), Belo Horizonte, MG (Brazil). Lab. de Radiobiologia]|[Minas Gerais Univ, Belo Horizonte, MG (Brazil). Dept. de Microbiologia; Neves, Maria Jose [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN), Belo Horizonte, MG (Brazil). Lab. de Radiobiologia

    2002-07-01

    Lyophilized cells of yeast Saccharomyces boulardii were submit to the gamma irradiation ({sup 60} Cobalt). It was noted that the yeast cells surviving to gamma irradiation had more trehalose than control cells. The incubation of cells with H{sub 2}0{sub 2} induces the synthesis of trehalose but the exposition to CdCl{sub 2} induces the accumulation of trehalose only in low concentrations. Apparently there is a positive correlation between of trehalose level and gamma irradiation resistance of S. boulardii cells. It was not observed any correlation with the level of trehalose determined and the oxidative stress tested. (author)

  1. Mechanical and thermal properties of castor oil polyurethane bone cement after gamma irradiation;Propriedades mecanicas e termicas de poliuretanas derivadas do oleo de mamona usadas como cimento osseo depois da irradiacao com radiacao gamma

    Energy Technology Data Exchange (ETDEWEB)

    Azevedo, E.C. [Universidade Tecnologica Federal do Parana (DF/UTFPR), Curitiba, PR (Brazil). Dept. de Fisica; Soboll, D.S. [Universidade Tecnologica Federal Parana (CPGEI/UTFPR), Curitiba, PR (Brazil); Chierice, G.O.; Claro Neto, S. [Universidade de Sao Paulo (IQSC/USP), Sao Carlos, SP (Brazil). Inst. de Quimica; Lepiesnki, C.M. [Universidade Federal do Parana (DF/UFPR), Curitiba, PR (Brazil). Dept. de Fisica; Nascimento, E.M. [Universidade Tecnologica Federal do Parana (DM/UTFPR), Curitiba (Brazil). Dept. de Mecanica

    2009-07-01

    Polyurethanes from castor oil are being employed as bone cement in medical applications. In this work the thermal and mechanical properties of gamma irradiated polyurethanes derivative from castor oil were investigated by instrumented indentation, thermogravimetry and scanning electron microscopy. A slightly increase in hardness is observed only for doses as high as 100 kGy. Thermal analysis indicates stability at human body temperature. The glass transition temperature has small changes after gamma irradiation. (author)

  2. Effect of gamma irradiation on mechanical and thermal properties of DGEBA/cycloaliphatic amine networks with potential for medical applications; Efeito da irradiacao gama nas propriedades mecanicas e termicas de redes DGEBA/amina cicloalifatica com potencial para aplicacoes medicas

    Energy Technology Data Exchange (ETDEWEB)

    Neves, Juliana C.; Silva, Glaura G., E-mail: glaura@qui.ufmg.br [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil); Mendes, Marcio W. Duarte; Bressiani, Ana H.; Bressiani, Jose C. [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Garcia, Filiberto Gonzalez [Universidade Federal de Itajuba (UNIFEI), MG (Brazil)

    2013-07-01

    Two epoxy polymers based on diglycidyl ether of bisphenol A (DGEBA), cured with piperidine (Pip) and 4,4'-diamino-3,3'-dimethyldicyclohexylmethane (3DCM), were characterized before and after treatment with γ irradiation. The changes in the mechanical and thermal properties were studied by elastic modulus, glass transition temperature and degradation temperature measurements. A dose of 50 kGy of irradiation caused subtle variations in properties such as rigidity and stability, which are relevant from the fundamental point of view. The variations do not imply on negative impact when considering the stage of sterilization during the use of these systems as a biomaterial in the medical area. (author)

  3. Irradiation alternative method of manganese sulfate solution by a Pu-Be source for efficiency measurements; Metodo alternativo de irradiacao da solucao de sulfato de manganes por uma fonte de Pu-Be para medicoes de eficiencia

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Fellipe Souza da; Martins, Marcelo Marques; Pereira, Walsan Wagner, E-mail: fellipess@ird.gov.br [Instituto de Radioprotecao e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil)

    2015-07-01

    This study intends to create an alternative irradiation system from a Plutonium-Beryllium source for manganese sulphate solution using the Monte Carlo code. Thus seeking to eliminate the issue of institutes that do not have reactors or particle accelerators in its infrastructure, in order to optimize and provide independence for them to carry out efficiency measurements of MnSO{sub 4} solution in their own locality. The Monte Carlo simulations defined the technical features of this new system so that the solution reaches the maximum neutron capture by manganese in solution. (author)

  4. Effect of gamma irradiation in papaya (Carica papaya L.) harvested in three degrees of maturation.; Efeito da irradiacao gama em mamao papaia (Carica papaya L.) colhido em tres pontos de maturacao

    Energy Technology Data Exchange (ETDEWEB)

    Pimentel, Rodrigo Meirelles de Azevedo

    2001-07-01

    The papaya is a fragile tropical fruit with thin skin, susceptible to post harvest diseases and mechanical injuries. Furthermore, it is sensible to low temperatures and at normal conditions it ripens rapidly, increasing the difficulties with storage. The objective of this work was to evaluate the influence of gamma irradiation in papayas harvested in three degrees of maturation, in order to increase shelf life. To accomplish that, papayas were harvested in perfect quality conditions, washed, submitted to carnauba wax and selected by skin coloration into three distinct degrees of maturation: Mat 0, or beginning of yellow coloration; Mat 1, yellow stripes more developed, and Mat 2, one third yellow. Half of them were submitted to irradiation with 0, 75 kGy, while the others became control treatment. They were analyzed in four different periods of conservation, which were 1 day after irradiation (DAI) refrigerated (11 +- 1 deg C), 14 DAI refrigerated, 14 DAI refrigerated + 3 at room temperature (RT = 24 deg +- 2 deg C) and 14 DAI refrigerated + 6 at RT. The effect of irradiation was not influenced by the maturation degree at harvest. Irradiation promoted firmness maintenance of papaya and, therefore, delayed ripening; modified the green color of papaya to a lighter tone, which determined more homogeneity in the skin yellow color development (greater values of L* and b*), and turned the papaya flesh color lighter (rower values of b*). There was no effect of irradiation in papaya weight loss, in the occurrence of diseases, in the development of surface yellow color, in the parameter a* of papaya skin color, in the parameters L*, a* and chroma of flesh color, p H and total soluble solids content. Visual and organoleptic sensorial tests were accomplished with papayas from a new delivery in the conservation period of 14 DAI refrigerated + 3 at RT. In the visual test was evaluated the appearance of papaya in the following treatments: Mat O control, Mat O irradiated, Mat 1 control, Mat 1 irradiated, Mat 2 control e Mat 2 irradiated, in which the first one received lower scores due to the occurrence of ratting on one of the papayas. In the organoleptic test, the parameters firmness, sweetness and acceptance were evaluated for the following treatments: control, Mat O irradiated, Mat 1 irradiated e Mat 2 irradiated. There was no difference between treatments for the sweetness parameter. The irradiated treatments received better scores for firmness as well as papayas irradiated at Mat 1 and 2 for acceptance (author)

  5. Gamma irradiation effect and time of storage on the beta-carotene rate of dehydrated parsley; Efeito da irradiacao gama e tempo de estoque no teor de beta-caroteno de salsa desidratada

    Energy Technology Data Exchange (ETDEWEB)

    Sebastiao, K.I.; Romanelli, M.F.; Leite, Q.R.; Koseki, P.M.; Hamasaki, K.; Villavicencio, A.L.C.H. [Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, SP (Brazil). Centro de Tecnologia das Radiacoes. Lab. de Analise e Deteccao de Alimentos]. E-mail: villavic@net.ipen.br; Almeida-Muradian, L.B. [Sao Paulo Univ., SP (Brazil). Faculdade de Ciencias Farmaceuticas]. E-mail: ligiabi@usp.br

    2000-07-01

    The A vitamin is an essential nutrient for men. Therefore, this vitamin or one of its precursors must be ingested for a healthful diet. The carotenoids are also called pro-vitamin A. As any another carotenoid, the {beta}-carotene has a structure with many unsaturations, conferring certain instability. It can be modified and even destroyed for acid, light, heat, oxygen; the formation of cis-trans isomers, reduction of its color and its pro-vitacimin A activity reduction can happen. Those alterations can occur during the processing or storage of the food. The use of the ionizing radiation is a kind of food processing that consists of the use of the high energy of the gamma ray or accelerates electrons, capable to ionize molecules. The carotenoids are considered by literature little sensible to the irradiation. It is suggested doses of 1 to 10 kGy in the irradiation of spices, dehydrated condiments and vegetables. These doses are enough to eliminate or to reduce pathogenic microorganisms and insects, to magnify the time of useful life and still substitute the use of chemical fumigants. They also reveal adequate to the organoleptic aspect, not affecting its flavor and smell. This study had as objective to search the different {beta}-carotene levels in samples of dehydrated parsley submitted to the radiation of {sup 60}Co and stored by 6 months. The results gotten in first analysis had not indicated difference significant statistics in {beta}-carotene rate between the controlled sample and the radiated one. After 6 months of storage, were verified that the {beta}-carotene rate had fallen for the half in both samples.

  6. Effect of irradiation and storage in the iron availability in lamb meat treated with different diets; Efeito da irradiacao e do armazenamento na disponibilidade de ferro em carne de cordeiro tratado com diferentes dietas

    Energy Technology Data Exchange (ETDEWEB)

    Souza, Adriana Regia Marques de; Arthur, Valter [Centro de Energia Nuclear na Agricultura (CENA/USP), Piracicaba, SP (Brazil). Lab. de Irradiacao de Alimentos e Radioentomologia]. E-mail: acornel@cena.usp.br; arthur@cena.usp.br; Canniatti-Brazaca, Solange Guidolin [Escola Superior de Agricultura Luiz de Queiroz (ESALQ/USP), Piracicaba, SP (Brazil). Dept. de Agroindustria, Alimentos e Nutricao]. E-mail: sgcbraza@esalq.usp.br; Couto, Meylene Aparecida Luzia [Escola Superior de Agricultura Luiz de Queiroz (ESALQ/USP), Piracicaba, SP (Brazil)]. E-mail: malcouto@esalq.usp.br

    2008-10-15

    Irradiation is an efficient method to increase the microbiological safety and to maintain the nutrients such as iron in the meat. The best absorption form, heme iron, should be preserved in order to increase the nutritional quality of stored meat. The diet can alter the nutrients contents and form in the meat. The iron is provided from the diet and it is an essential element for the metabolic processes such as oxygen transport, oxidative metabolism, and cellular growth. Meat lamb samples treated with different diets (it controls, TAC1, TAC2 and sorghum) were wrapped to vacuous, and irradiated in the doses 0, 2 and 4 kGy and stored at 4 deg C during 15 days. The values of total iron and heme iron were measured at 0 and 15 days of storage. The storage reduced the content of total iron (18.36 for 14.28 mg.100 g{sup -1}) and heme iron (13.78 for 10.52 mg.100 g{sup -1}). The diets affected the levels of total and heme iron of the meat, and the sorghum diet was the one that presented the larger content. The dose of 2 kGy was the one that affected the iron the most independently of the storage time. It was verified that the amounts of total and heme iron varied according to the storage time, irradiation doses, and lamb diets. (author)

  7. Laserterapia de baixa intensidade no pós-operatório da síndrome do túnel do carpo Low-level laser therapy after carpal tunnel release

    Directory of Open Access Journals (Sweden)

    Marcelo de Pinho Teixeira Alves

    2011-01-01

    Full Text Available OBJETIVO: Avaliar o tratamento pós-operatório da síndrome do túnel do carpo (STC, utilizando-se a laserterapia de baixa intensidade (LBI. MÉTODO: Foram avaliados prospectivamente 58 pacientes portadores de STC, divididos aleatoriamente em dois grupos: tratamento com LBI (grupo 1 e placebo (grupo 2. Foi utilizado laser de 830nm, de gálio-alumínio-arsênico, e potência de 30mW. RESULTADOS: Houve predominância do sexo feminino, em ambos os grupos. A média de idade dos pacientes do grupo 1 foi de 44,3 anos e do grupo 2, de 51,9 anos. A média do tempo de evolução da doença foi aproximadamente dois anos em ambos os grupos. A média do tempo decorrido para alta do tratamento foi de 3,6 meses, em ambos os grupos, com menor número de pacientes queixosos no pós-operatório do grupo 1 do que do grupo 2. Ao fim do tratamento, no grupo 1, 29,41% dos pacientes apresentavam eletroneuromiografia alterada, enquanto que, no grupo 2, foram 63,64% dos pacientes após seis meses. CONCLUSÕES: Trata-se de estudo inicial sobre a terapêutica adjuvante utilizando LBI no pós-operatório da STC. A metodologia apresentada foi suficiente para a avaliação pós-operatória dos pacientes do estudo. Os pacientes submetidos à LBI após a cirurgia para STC foram beneficiados e obtiveram melhores resultados funcionais quando comparados ao grupo controle. A técnica foi eficaz e sem efeitos adversos nos pacientes estudados.OBJECTIVE: Evaluate the post-operative treatment of CTS, using the LLLT. METHOD: We prospectively evaluated 58 patients with CTS, randomly divided into two groups: treatment with LLLT (Group 1 and placebo (Group 2. A 830 nm gallium-aluminum-arsenic laser was used, with a power of 30 mW. RESULTS: There was female predominance in both groups. The mean age of the patients in Group 1 was 44.3 years and in Group 2, 51.9 years. The average duration of disease progression was around two years in both groups. The average time elapsed since discharge

  8. In vitro study of demineralization resistance and fluoride retention in dental enamel irradiated with Er,Cr: YSGG laser; Estudo in vitro da resistencia a desmineralizacao e da retencao de fluor em esmalte dental irradiado com laser de Er, Cr: YSGG

    Energy Technology Data Exchange (ETDEWEB)

    Ana, Patricia Aparecida da. E-mail: patriciadaana@yahoo.com.br

    2007-07-01

    This study aimed to establish irradiation conditions of Er,Cr:YSGG laser ({lambda} of 2.79 {mu}m) which could propitiate changes on human dental enamel and increase its resistance to demineralization, when associated or not with topical application of acidulated phosphate fluoride (APF). Fluences of 2,8 J/cm{sup 2}, 5,6 J/cm{sup 2} e 8,5 J/cm{sup 2} were selected; they were associated or not with previous application of a photo absorber (coal paste) and then APF was applied or not after laser irradiation. In a first step, the morphological findings, the surface temperatures, and the pupal temperatures were evaluated during laser irradiation. After that, the treated samples were submitted to a a ten-day pH-cycling model. After producing the incipient white-spots lesions, the following aspects were evaluated: the mineral loss, the loosely bound fluoride and the firmly bound fluoride. All the demineralizing and remineralizing pH-cycling solutions were evaluated with respect to their calcium (Ca), inorganic phosphorous (Pi) and fluoride (F{sup -}) concentrations. The data had their normality and homogeneity distribution statistically evaluated, and it was chosen an appropriated statistical test for each performed analysis according to the obtained results, considering 5% significant level. The fluences selected for this study created ablated surfaces; the fluences of 5.6 J/cm{sup 2} and 8.5 J/cm{sup 2} promoted increments in surface temperature above 110 deg C. The intrapupal temperature changes revealed that laser irradiation did not increase the pulpal temperatures above the critical threshold for induction of pulpitis. The coal paste did not promote any changes on surface morphology or in the intrapulpal temperature changes; however, this paste increased the surface temperatures during laser irradiation. Only laser irradiation at 8.5 J/cm{sup 2} was able to decrease the mineral loss when compared to the no-treatment group; although the association of coal paste

  9. Histological analysis of low-intensity laser therapy effects in peripheral nerve regeneration in Wistar rats Avaliação histológica dos efeitos da laserterapia de baixa potência sobre os processos de regeneração nervosa periférica em ratos Wistar

    Directory of Open Access Journals (Sweden)

    Cibele Nazaré da Silva Câmara

    2011-02-01

    Full Text Available Purpose: Analyze the influence of low-intensity laser therapy in the sciatic nerve regeneration of rats submitted to controlled crush through histological analysis. Methods: Were used 20 Wistar rats, to analyze the influence of low-intensity laser therapy in the sciatic nerve regeneration, where the injury of the type axonotmesis was induced by a haemostatic clamp Crile (2nd level of the rack. The animals were randomly distributed in 2 groups. Control group (CG n = 10 and Laser group (LG n = 10. These were subdivided in 2 subgroups each, according to the euthanasia period: (CG14 _ n = 5 and CG21 _ n = 5 and (LG14 _ n = 5 and LG21 _ n = 5. At the end of treatment, the samples were removed and prepared for histological analysis, where were analyzed and quantified the following findings: Schwann cells, myelinic axons with large diameter and neurons. Results: In the groups submitted to low-intensity laser therapy, were observed an increase in the number of all analyzed aspects with significance level. Conclusion: The irradiation with low intensity laser (904nm influenced positively the regeneration of the sciatic nerve in Wistar rats after being injured by crush (axonotmesis, becoming the nerve recovery more rapid and efficient.Objetivo: Verificar a influência da terapia com laser de baixa potência na regeneração histológica do nervo ciático de ratos submetidos à neuropraxia controlada. Métodos: Foi utilizada a amostra de 20 ratos da linhagem Wistar, para verificar a influência da terapia com laser de baixa intensidade na regeneração nervosa periférica, onde a lesão do tipo axoniotmese foi induzida por meio de preensão com pinça hemostática de Crile. Os animais foram distribuídos randomicamente dois grupos. Grupo controle (CG n = 10, e Grupo laser (LG n = 10. Cada um destes grupos foi subdividido em dois subgrupos dependendo do período da eutanásia: (CG14 - n = 5 e CG21 - n = 5 e (LG14 - n = 5 e LG21 - n = 5. Ao final do

  10. In vitro comparative study of share bond of light cured composite resins with halogen light and argon laser, using stainless steel brackets on human premolars; Estudo comparativo in vitro da capacidade adesiva da resina fotoativada pela luz halogena e por laser de argonio, utilizando-se brackets metalicos em pre-molares humanos

    Energy Technology Data Exchange (ETDEWEB)

    Carillo, Vitoria Eugenia Bismarck

    2004-07-01

    The aim of this study in vitro was to compare the share bond strength of the light-cured composite resins Transbond XT (Unitek), with halogen light and argon laser. The Adhesive Remmant Index (ARI) was also investigated. The brackets Dyna lock (3M-UNITEK) were bonded to 75 human premolars, divided into 5 groups (15 each) according to time and the polymerization: Group H20, 15 brackets bonded with halogen light for 20s (10s both sides); Group H40, 15 brackets bonded with halogen light for 40s (20s both sides); Group A40, 15 brackets bonded with argon laser for 40s (20s both sides); Group A20, 15 brackets bonded with argon laser for 20s (10s both sides); Group A10, 15 brackets bonded with argon laser for 10s (5s both sides). The pulpal temperature changes were determined during a polymerization, not exceeding 3,5 deg C. After bonding, the teeth were submitted to a thermo cycled of 700 cycles between 5 deg C and 55 deg C, to simulate the consuming that the light cured composite resin would have in a short space of time. The specimens were then placed in PVC ring and embedded in acrylic resin (Aero-Jet). The tensile bond strength test was performed on an Universal Machine set at a crosshead speed of 1,5 mm/min, and for each rupture we registered a graphic and the best load required in Newtons, was converted to MPa and kgf. The share bond strength showed bigger values for the exposure time of 20 seconds, for the Group bonded for halogen light (H20), 7,45 kgf (7,64 MPa) and for argon laser 7,50 kgf (7,69 MPa); lesser values for the exposure time of 40s for the Group with halogen light (H40), 6,15 kgf (6,30 MPa) and argon laser Group (A40), 6,20 kgf (6,35 MPa) 0; and A10, 4,85 kgf (4,97 MPa). In the ARI Index, only A40 Group showed the 1 Index, with statistical results. In this Group, less than half of the remainder adhesive stayed on the surface of the enamel, conferring specimens failed at the enamel-adhesive interface. The results of the in vitro study demonstrate that

  11. Intrapulpal temperature during preparation with the Er:YAG laser: an in vitro study; Avaliacao da temperatura intrapulpar de incisivos bovinos irradiados com o laser de Er:YAG

    Energy Technology Data Exchange (ETDEWEB)

    Geraldo-Martins, Vinicius Rangel

    2003-07-01

    This study evaluated the variation of the pulp chamber temperature when dentine, with 2,0 mm of thickness, adjacent to the pulp, was irradiated by the Er:YAG laser. Seventy two bovine incisors were used, that had the enamel and dentine of the buccal surface weared until to reach the thickness used in this study. The teeth were divided in 3 groups, according with the repetition rate used ( Group I = 2 Hz; Group II = 4 Hz and Group III = 6 Hz), and irradiated, with or without water cooling, using 250, 300 and 350 mJ of energy per pulse. Thermocouples were introduced inside the pulp chamber through the palatine opening of the samples and fixed to the vestibular wall of the pulp chamber using a thermal paste. After the statistical analysis, it was verified that there was a decrease of the intrapulpal temperature for all of the parameters in the group I irradiated with water cooling. In the same group, but without cooling, occurred increases of the intrapulpal temperature, however they were less than 2 deg C. In the group 11, only the para meter 350 mJ/4 Hz/ with water cooling presented decrease of the temperature (-0,08 deg C). The other irradiations presented increase of the intrapulpal temperature, varying from 1,5 to 1,9 deg C for irradiations without cooling and of 0,03 the 0,58 deg C for the samples irradiated under water cooling. In the group III, all of the samples presented increase of the intrapulpal temperature, however, they were smaller than to 2,5 deg C. The conditions of this study allow to conclude that the use of the laser of Er:YAG promoted acceptable temperature increases inside the pulp chamber, not reaching the critical level of 5,5 deg C. However, in spite of the temperature variations inside the pulp chamber have not reached critical levels, this procedure should not be recommended because macroscopic observations of the dentine irradiated without water cooling showed dark lesions, suggesting carbonization of this tissue. (author)

  12. In vitro evaluation of the morphologic changes on the root dentine irradiated by CO{sub 2} laser associated or not to calcium hydroxide application; Avaliacao in vitro das alteracoes morfologicas da superficie da dentina radicular irradiada pelo laser de CO{sub 2} associado ou nao a aplicacao de hidroxido de calcio

    Energy Technology Data Exchange (ETDEWEB)

    Romano, Ana Cristina Cury Camargo

    2003-07-01

    This in vitro study has evaluated the structural changes on the root dentine irradiated by a CO{sub 2} laser associated or not to calcium hydroxide application, from the irradiated surface analysis by means of Scanning Electronic Microscopy (SEM). The purpose of this evaluation has been the study of an alternative method for the treatment of dentine hypersensitivity. Fourteen human teeth were utilized, third molars, divided into 7 groups. Group I (control group) to which no treatment was applied; Groups II, III and IV were given an application of Ca (OH){sub 2} paste followed by C0{sub 2} laser irradiation, lasting 5 seconds each with intervals of 10 seconds between each application, with continuous emission, power of 0.5 W (Group II), 1.0 W (Group III), and 1.5 W (Group IV); Groups V, VI, and VII were given laser irradiations without the Ca (OH){sub 2} paste following the same parameters applied to groups II, III, and IV respectively. Morphologic changes suggesting to fusion and re-solidification have been observed, as well as the presence of material obstructing the whole analyzed surface on groups II, III, and IV (laser + Ca (OH){sub 2}). As for groups V, VI, and VII, it has been observed fusion, re-solidification, and cracks, and these results being statistically significant when compared the '(Ca (OH){sub 2})' groups to the laser groups. No statistically significant differences were observed regarding the different powers applied in the groups that used the same treatment. Despite this result, it can be stated that powers above 1.0 W (DP = 125,38 W/cm{sup 2}) are unfavorable due to the undesirable morphologic alterations and aesthetic compromising. (author)

  13. In vitro evaluation of the morphologic changes on the root dentine irradiated by CO{sub 2} laser associated or not to calcium hydroxide application; Avaliacao in vitro das alteracoes morfologicas da superficie da dentina radicular irradiada pelo laser de CO{sub 2} associado ou nao a aplicacao de hidroxido de calcio

    Energy Technology Data Exchange (ETDEWEB)

    Romano, Ana Cristina Cury Camargo

    2003-07-01

    This in vitro study has evaluated the structural changes on the root dentine irradiated by a CO{sub 2} laser associated or not to calcium hydroxide application, from the irradiated surface analysis by means of Scanning Electronic Microscopy (SEM). The purpose of this evaluation has been the study of an alternative method for the treatment of dentine hypersensitivity. Fourteen human teeth were utilized, third molars, divided into 7 groups. Group I (control group) to which no treatment was applied; Groups II, III and IV were given an application of Ca (OH){sub 2} paste followed by C0{sub 2} laser irradiation, lasting 5 seconds each with intervals of 10 seconds between each application, with continuous emission, power of 0.5 W (Group II), 1.0 W (Group III), and 1.5 W (Group IV); Groups V, VI, and VII were given laser irradiations without the Ca (OH){sub 2} paste following the same parameters applied to groups II, III, and IV respectively. Morphologic changes suggesting to fusion and re-solidification have been observed, as well as the presence of material obstructing the whole analyzed surface on groups II, III, and IV (laser + Ca (OH){sub 2}). As for groups V, VI, and VII, it has been observed fusion, re-solidification, and cracks, and these results being statistically significant when compared the '(Ca (OH){sub 2})' groups to the laser groups. No statistically significant differences were observed regarding the different powers applied in the groups that used the same treatment. Despite this result, it can be stated that powers above 1.0 W (DP = 125,38 W/cm{sup 2}) are unfavorable due to the undesirable morphologic alterations and aesthetic compromising. (author)

  14. Apical microinfiltration evaluation of radicular channels irradiated with Er:YAG laser in vitro; Avaliacao da microinfiltracao apical de condutos radiculares irradiados in vitro com laser de Er:YAG

    Energy Technology Data Exchange (ETDEWEB)

    Sebrao, Catia Cilene Nass

    2003-07-01

    It was evaluated, in vitro, the adaptation of the filling material (Sealer 2S{sup R}) to the root channels dentine walls treated using the endodontic technique and prepared with the Er:YAG laser, by the technique of infiltration of methylene blue dye. Using scanning electronic microscopy, the morphologic alteration of the root channel dentine was observed for one sample per studied group. Also, an evaluation of the temperature increase in the external surface of the root during the irradiations was performed for two samples per group. For each group of samples, with eleven roots each, two sub-groups had been considered: the dry, irradiated after completely dry with absorbent cones of paper, and the humid, where a cone of absorbent paper was applied for two seconds in the root canal, leaving them lightly humidified. Considering the used energies for the irradiations, the groups are: G1, control (without irradiation), G2-dry (100 mJ-10 Hz), G2-humid (100 mJ-10 Hz), G3-dry (140 mJ-6 Hz), G3-humid (140 mJ-6 Hz), G4-dry (180 mJ-6 Hz), and G4-humid (180 mJ-6 Hz). The results had shown that apical microinfiltration did not exhibit significant difference among groups. The highest increase in temperature was observed for the dry groups, with the maximum variation of temperature of 6.5 deg C. Under the scanning electronic microscopy analysis, the humid groups had presented cleaner surfaces than the dry groups. The G4-humid group presented extensive regions of fusion and resolidification of the dentine. (author)

  15. Clinical evaluation of the low intensity laser antialgic action of GaAlAs ({lambda}=785 nm) in the treatment of the temporomandibular disorders; Avaliacao clinica da acao antialgica do laser em baixa intensidade de arseneto de galio e aluminio ({lambda}=785 nm) no tratamento das disfuncoes da articulacao temporo-mandibular

    Energy Technology Data Exchange (ETDEWEB)

    Sanseverino, Nelly Tichauer Maluf

    2001-07-01

    The therapy with laser emitting low intensity has been currently used in the most diverse fields of medicine as therapeutic conduct for pain. It is a non invasive, painless, non-thermal and aseptic type therapy, without any collateral effects, having a good cost/benefit relationship. However, for the therapy with low-intensity laser to result in positive effects, a correct diagnosis is fundamental, as well as a protocol of adequate application. n odontology, the majority of patients diagnosed with temporomandibular disorders (TMD), present pain and limitations in the movements of the jaw. In this work, a GaAlAs laser emitting low intensity, was used, {lambda}=785 nm, in patients having a dysfunction of the temporomandibular joint with a complaint of pain. Twenty patients were divided into two groups. The group treated received laser therapy in the temporomandibular articulations and in the muscles affected. The dose applied was 45 J/cm{sup 2}, while the ten patients in the control group received 0 J/cm{sup 2}, in a total of nine applications, carried out three times a week, during three weeks. he evaluation of the patients was made through clinical examinations of manual palpation of the masseter, temporal, cervical, posterior neck and sternocleidomastoid muscles, and measurements of opening and laterality of the mouth. The results obtained showed a diminishing of the pain and an increase of the mandibular mobility in the patients treated, when compared to the control group. These results point to this therapy as being an important tool in the treatment of pain in patients with a dysfunction in the TMJ, indicating this therapeutic modality as a co-adjuvant in these treatments. (author)

  16. The influence of screw type, alloy and cylinder position on the marginal fit of implant frameworks before and after laser welding Influência do tipo de parafuso, liga e da posição do cilindro na adaptação marginal das infra-estruturas sob implantes antes e após a soldagem a laser

    Directory of Open Access Journals (Sweden)

    Daniela Castilio

    2006-04-01

    Full Text Available Misfit at the abutment-prosthetic cylinder interface can cause loss of preload, leading to loosening or fracture of gold and titanium screws. OBJECTIVES: To evaluate the influence of screw type, alloy, and cylinder position on marginal fit of implant frameworks before and after laser welding. METHODS: After Estheticone-like abutments were screwed to the implants, thirty plastic prosthetic cylinders were mounted and waxed-up to fifteen cylindrical bars. Each specimen had three interconnected prosthetic components. Five specimens were one-piece cast in titanium and five in cobalt-chromium alloy. On each specimen, tests were conducted with hexagonal titanium and slotted gold screws separately, performing a total of thirty tested screws. Measurements at the interfaces were performed using an optical microscope with 5mm accuracy. After sectioning, specimens were laser welded and new measurements were obtained. Data were submitted to a four-way ANOVA and Tukey's multiple comparisons test (alpha=0.05. RESULTS: Slotted and hexagonal screws did not present significant differences regarding to the fit of cylinders cast in titanium, either in one-piece casting framework or after laser welding. When slotted and hexagonal screws were tested on the cobalt-chromium specimens, statistically significant differences were found for the one-piece casting condition, with the slotted screws presenting better fit (24.13µm than the hexagonal screws (27.93 µm. Besides, no statistically significant differences were found after laser welding. CONCLUSIONS: 1 The use of different metal alloys do exert influence on the marginal fit, 2 The slotted and hexagonal screws play the exclusive role of fixing the prosthesis, and did not improve the fit of cylinders, and 3 cylinder position did not affect marginal fit values.A desadaptação na interface abutment-cilindro protético pode causar perda da pré-carga, levando ao afrouxamento ou fratura dos parafusos de ouro e tit

  17. In vitro study of the effects of cooling water temperature during the use of Er:YAG laser on dentin; Estudo in vitro dos efeitos da temperatura da agua de refrigeracao no uso de laser de Er:YAG em dentina

    Energy Technology Data Exchange (ETDEWEB)

    Pinto, Ismael Lucas

    2004-07-01

    This study measured the pulp chamber and the target surface with 2 thermocouples, in order to determine whether cooling with water spray, with Er:YAG laser (Kavo Key 2), was overcooling the tooth, much beyond the necessary, during laser irradiation, within variation limits of 2.2 deg C of body temperature. The parameters used were: E{sub p}=250 mJ per pulse, with frequency ranging between 2 to 4 Hz, for a total DE of 80.20 J/cm{sup 2}, at an angle of incidence of approximately 90 deg, during an exposure period of 1 minute, totaling 120 to 240 pulses. In the first 40 seconds, the spray cooled the tooth rapidly, from 36.5 deg C to below 30 deg C. It was impossible to control the spray output temperature with a simple increase in reservoir temperature, for when water at temperatures ranging between 90 and 100 deg C is placed in the reservoir, the heat dissipates completely during the trajectory. The water jet does not present the same characteristics as a spray, which makes it impossible to conduct a perfect comparative analysis between them. The increase and maintenance of the spray output temperature, by reducing the temperature differential between that of the body and that of the spray of the Er:YAG laser, proved to be extremely promising. The pulp chamber temperature followed that of the spray or water jet, so that when a temperature that is lower than body temperature is used, the temperature of the pulp chamber is decreases, and when body temperature is surpassed, the temperature of the pulp chamber increases. (author)

  18. Comparative study of the action of two different types of bleaching agents activated by two different types of irradiation fonts: xenon plasma arc lamp and 960 nm diode laser; Avaliacao da cor e estudo comparativo da acao de dois tipos diferentes de agentes clareadores ativados pelo laser de diodo e lampada xenonio plasmatica, na superficie do esmalte

    Energy Technology Data Exchange (ETDEWEB)

    Walverde, Debora Ayala

    2001-07-01

    This in vitro study compares two different types of tooth bleaching agents stimulated with two different irradiation fonts. These fonts accelerate the action of the bleaching agents upon the enamel surface by heating up the materials. We used the xenon plasma arc lamp and a 960 nm fiber-coupled diode laser to irradiate the two materials containing 35% of hydrogen peroxide (Opus White and Opalescence extra). The color of the teeth was measured with a spectrophotometer using the CIELAB color system that gives the numeric values of L{sup *}a{sup *}b{sup *}. (author)

  19. Evaluation of the effect of low intensity laser radiation on the osseointegration of titanium implants inserted in rabbits' tibia; Avaliacao biomecanica da acao da radiacao laser em baixa intensidade no processo de osseointegracao de implantes de titanio inseridos em tibia de coelhos

    Energy Technology Data Exchange (ETDEWEB)

    Castilho Filho, Thyrso

    2003-07-01

    The purpose of this study was to evaluate the influence of low intensity laser irradiation on bone repair process after titanium implant surgeries performed in rabbits' tibia. Thirty three Norfolk rabbits were divided into three different groups according to the implant removal period (14, 21 and 42 days). Two titanium-pure implants were inserted one in each tibia and one side was randomly chosen to be irradiated. Irradiations were performed employing a GaAlAs laser ({lambda}=780 nm) during 10 seconds, with an energy density of 7.5 J/cm{sup 2} on 4 spots: above, bellow, on the right and on the left side of the implants with an interval between irradiations of 48 hours during 14 days. Animals were sacrificed according to the observation times, tibias were removed and the strength removal values recorded. Results showed that, for the 21 and 42 days sacrifices periods, the irradiated side presented a statistically higher implant strength removal values when compared to the non-irradiated side. (author)

  20. Comparative study of analgesic effect of the infrared low-intensity laser and 33% sodium fluoride paste in the treatment of dentinal hypersensitivity; Estudo comparativo do efeito analgesico do laser em baixa intensidade de emissao infravermelha e da pasta de fluoreto de sodio a 33% no tratamento da hipersensibilidade dentinaria

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Glen Anderson Maia de

    2003-07-01

    Different desensitizing agents have been used in the treatment of dentinal hypersensitivity, however, some presented treatments are still frustrating. The purpose of this study was to evaluate the analgesic effect of the low-intensity GaAlAs laser ({lambda}= 830 nm) in the treatment of dentinal hypersensitivity after mechanical and thermal stimuli, and compared it with the 33% sodium fluoride paste. Thirty two teeth with dentinal hypersensitivity were selected and randomly divided into two groups. For the laser group, each tooth was irradiated by a dose of 6 J/cm{sup 2} during two minutes and half on the buccal side. The paste group was treated with a NaF/kaolin/glycerin (33:33:33) paste by burnishing the sensitive surface during four minutes. The sensitivity degree was measured before the beginning of the experiment, 24 h, 48 h, 72 h, 120 h, 15 days and 30 days after the first application. The results indicate that the dentinal hypersensitivity significantly diminished for the paste group after dental explorer. Regarding to air-blast, no significant differences were observed between the groups. Both of them were effective in reducing pain of the dentine hypersensitive after 120 h. (author)

  1. Evaluation of the effect of low intensity laser radiation on the osseointegration of titanium implants inserted in rabbits' tibia; Avaliacao biomecanica da acao da radiacao laser em baixa intensidade no processo de osseointegracao de implantes de titanio inseridos em tibia de coelhos

    Energy Technology Data Exchange (ETDEWEB)

    Castilho Filho, Thyrso

    2003-07-01

    The purpose of this study was to evaluate the influence of low intensity laser irradiation on bone repair process after titanium implant surgeries performed in rabbits' tibia. Thirty three Norfolk rabbits were divided into three different groups according to the implant removal period (14, 21 and 42 days). Two titanium-pure implants were inserted one in each tibia and one side was randomly chosen to be irradiated. Irradiations were performed employing a GaAlAs laser ({lambda}=780 nm) during 10 seconds, with an energy density of 7.5 J/cm{sup 2} on 4 spots: above, bellow, on the right and on the left side of the implants with an interval between irradiations of 48 hours during 14 days. Animals were sacrificed according to the observation times, tibias were removed and the strength removal values recorded. Results showed that, for the 21 and 42 days sacrifices periods, the irradiated side presented a statistically higher implant strength removal values when compared to the non-irradiated side. (author)

  2. Perioperative effects of oral midazolam premedication in children undergoing skin laser treatment: a double-blinded randomized placebo-controlled trial Efeitos peroperatórios da premedicação oral de midazolam em crianças submetidas a tratamento de pele por laser: estudo duplo-cego randomizado e controlado

    Directory of Open Access Journals (Sweden)

    Mehrdad Shoroghi

    2011-08-01

    tratamento de pele por laser foram distribuídas aleatóriamente em três grupos de 30 cada: o grupo placebo recebeu 0.1mg/kg de suco de laranja, grupos dois e três receberam 0.5 e 1mg/kg de midazolam injetável misturado em igual volume de suco de laranja respectivamente. Os principais registros incluíam a aceitação da máscara, escalas de comportamento e eventos pós-operatórios. RESULTADOS:Não houve diferenças significantes cardíacas, respiratórias e pressão sanguinea sistólica nos três grupos. Contudo, o nível de saturação de oxigênio foi reduzido significantemente nos que receberam 1mg.kg-1 de midazolam. Os níveis médios de ansiedade, separação dos pais, preparo intravenoso, aceitação da máscara de oxigênio, boa sedação, redução do choro e nível de consciência, foram melhores no grupo midazolam. Agitação pós-operatória e retorno do chora foi mais freqüente nos que receberam placebo. Observou-se que o grupo que recebeu 1mg.kg-1 foi melhor comparado ao que recebeu 0.5mg.kg-1. CONCLUSÃO:Como medicação pré-anestésica na dose de 1mg.kg-1 de midazolam, fornecida em igual volume de suco de laranja, é satisfatória no comportamento de crianças durante tratamento de pele por laser, proporcionando satisfação dos pais.

  3. Morphologic analysis, by means of scanning electron microscopy, of the effect of Er: YAG laser on root surfaces submitted to scaling and root planing Análise morfológica, através de microscopia eletrônica de varredura, da ação do laser de Er: YAG em superfícies radiculares submetidas à raspagem e aplainamento radicular

    Directory of Open Access Journals (Sweden)

    Letícia Helena Theodoro

    2002-12-01

    Full Text Available The purpose of this study was to morphologically evaluate, by means of scanning electron microscopy, the effects of Er:YAG laser on the treatment of root surfaces submitted to scaling and root planing with conventional periodontal instruments. Eighteen root surfaces (n = 18, which had been previously scaled and planed, were assigned to 3 groups (n = 6. The control Group (G1 received no further treatment; Group 2 (G2 was irradiated with Er:YAG laser (2.94 mum, with 47 mJ/10 Hz, in a focused mode with air/water spray during 15 s and with 0.57 J/cm² of fluency per pulse; Group 3 (G 3 was irradiated with Er:YAG laser (2.94 mum, with 83 mJ/10 Hz, in a focused mode with air/water spray during 15 s and with 1.03 J/cm² of fluency per pulse. We concluded that the parameters adopted for Group 3 removed the smear layer from the root surface, exposing the dentinal tubules. Although no fissures, cracks or carbonized areas were observed, an irregular surface was produced by Er:YAG laser irradiation. Thus, the biocompatibility of the irradiated root surface, within the periodontal healing process, must be assessed.O objetivo do presente estudo foi analisar morfologicamente, através de microscopia eletrônica de varredura, os efeitos do laser de Er:YAG no tratamento de superfícies radiculares submetidas à raspagem e aplainamento radicular com instrumentos manuais. Foram utilizados 18 espécimes (n = 18 de superfícies radiculares que após ser submetidos à raspagem e aplainamento radicular foram divididos em 3 grupos (n = 6. O grupo controle (G1 não sofreu nenhum tratamento; Grupo 2 (G2 foi irradiado com laser de Er:YAG (2,94 mim 47 mJ/10 Hz, focalizado,com refrigeração à água durante 15 s e fluência de pulso de 0,57 J/cm²; Grupo 3 (G3 foi irradiado com laser de Er:YAG (2,94 mim, 83 mJ/10 Hz, focalizado, com refrigeração à agua durante 15 s e fluência de pulso de 1,03 J/cm². Através da análise dos resultados podemos concluir que o laser de

  4. The Newest Laser Processing

    International Nuclear Information System (INIS)

    Lee, Baek Yeon

    2007-01-01

    This book mentions laser processing with laser principle, laser history, laser beam property, laser kinds, foundation of laser processing such as laser oscillation, characteristic of laser processing, laser for processing and its characteristic, processing of laser hole including conception of processing of laser hole and each material, and hole processing of metal material, cut of laser, reality of cut, laser welding, laser surface hardening, application case of special processing and safety measurement of laser.

  5. Inhibition of carrageenan-induced expression of tissue and plasma prekallikreins mRNA by low level laser therapy in a rat paw edema model Inibição da expressão de RNA mensageiro de pré-calicreínas tecidual e plasmática pela laserterapia em modelo de edema de pata induzido pela carragenina em ratos

    Directory of Open Access Journals (Sweden)

    Moisés P. Silva

    2011-02-01

    Full Text Available BACKGROND: Low level laser therapy (LLLT has been used clinically in order to treat inflammation, where tissue and plasma prekallikrein have crucial importance. Plasma prekallikrein (PPK is synthesized by the hepatocytes and secreted into the bloodstream, where it participates in the surface-dependent activation of blood coagulation, fibrinolysis, kinin generation and inflammation. Tissue prekallikrein is associated with important disease states (including cancer, inflammation, and neurodegeneration and has been utilized or proposed as clinically important biomarker or therapeutic target of interest. OBJECTIVE: To evaluate if LLLT modulates tissue and plasma prekallikreins mRNA expression in the carrageenan-induced rat paw edema. METHODS: Experimental groups were assigned as followed: A1 (Control-saline, A2 (Carrageenan-only, A3 (laser 660nm only and A4 (Carrageenan + laser 660nm. Edema was measured by a plethysmometer. Subplantar tissue was collected for the quantification of prekallikreins mRNA by Real time-Polymerase Chain Reaction. RESULTS: A significantly decrease in the edema was observed after laser irradiation. Expression of prekallikreins increased after carrageenan injection. Tissue and plasma prekallikrein mRNA expression significantly decreased after LLLT's 660nm wavelength. CONCLUSION: These results suggest that expression of tissue and plasma prekallikreins is modulated by LLLT, which can be used in clinical practice due to its anti-inflammatory effects.CONTEXTUALIZAÇÃO: A laserterapia de baixa potência tem sido usada para o tratamento de processos inflamatórios diversos em que a calicreína tecidual e a plasmática possuem participação ativa. A pré-calicreína plasmática (PPK é sintetizada pelos hepatócitos e secretada na corrente sanguínea, onde participa da ativação da coagulação, fibrinólise, geração de cininas e inflamação. A pré-calicreína tecidual está associada com importantes doenças (incluindo c

  6. Influência da naloxona e metisergida sobre o efeito analgésico do laser em baixa intensidade em modelo experimental de dor Influencia de la naloxona y la metisergida sobre el efecto analgésico del láser en baja intensidad en modelo experimental de dolor Influence of naloxone and methysergide on the analgesic effects of low-level laser in an experimental pain model

    Directory of Open Access Journals (Sweden)

    André Peres e Serra

    2010-06-01

    Full Text Available JUSTIFICATIVA E OBJETIVOS: A fototerapia com laser (LPT é um método analgésico promissor, embora seu mecanismo de ação não seja totalmente conhecido. O objetivo deste estudo foi avaliar se a ação da LPT é dependente da ativação de receptores opioides ou serotoninérgicos periféricos. MÉTODO: Foram utilizados ratos Wistar machos. A dor produzida foi de caráter inflamatório, através da injeção de carragenina na pata posterior esquerda dos ratos. O laser utilizado foi o Photon Lase III em meio ativo InGaAIP (660 nm, fluência de 2,5 J.cm-2. Analisou-se a hiperalgesia mecânica utilizando filamentos de von Frey. Os animais foram separados em cinco grupos: Carragenina; Laser (LPT; Luz não coerente; LPT + Naloxona e LPT + Metisergida. RESULTADOS: A fototerapia com laser em baixa intensidade mostrou-se um método analgésico eficaz, enquanto o emprego de fonte de luz não coerente não mostrou ter efeito analgésico. O uso de naloxona bloqueou o efeito analgésico do LPT; já o uso de metisergida não afetou a analgesia do LPT. CONCLUSÕES: A LPT nos parâmetros utilizados apresentou efeito analgésico. A analgesia da LPT é mediada por receptores opioides periféricos. A LPT parece não interagir com receptores serotoninérgicos periféricos.JUSTIFICATIVA Y OBJETIVOS: La fototerapia con láser (LPT es un método analgésico promisorio, aunque su mecanismo de acción no se conozca en su totalidad. El objetivo de este estudio fue evaluar si la acción de la LPT es dependiente de la activación de receptores opioides o serotoninérgicos periféricos. MÉTODO: Se usaron ratones Wistar machos. El dolor generado fue de carácter inflamatorio, a través de la inyección de carragenina en la pata posterior izquierda de los ratones. El láser utilizado fue el GaIAsAl (660 nm, fluencia de 2,5 J.cm-2. Se analizó la hiperalgesia mecánica utilizando filamentos de von Frey. Los animales se dividieron en cinco grupos: Carragenina; Láser (LPT

  7. Laser Therapy

    Science.gov (United States)

    ... for Every Season How to Choose the Best Skin Care Products In This Section Dermatologic Surgery What is dermatologic ... for Every Season How to Choose the Best Skin Care Products Laser Resurfacing Uses for Laser Resurfacing Learn more ...

  8. Lasers technology

    International Nuclear Information System (INIS)

    2014-01-01

    The Laser Technology Program of IPEN is developed by the Center for Lasers and Applications (CLA) and is committed to the development of new lasers based on the research of new optical materials and new resonator technologies. Laser applications and research occur within several areas such as Nuclear, Medicine, Dentistry, Industry, Environment and Advanced Research. Additional goals of the Program are human resource development and innovation, in association with Brazilian Universities and commercial partners

  9. YCOB lasers

    International Nuclear Information System (INIS)

    Richardson, Martin; Hammons, Dennis; Eichenholz, Jason; Chai, Bruce; Ye, Qing; Jang, Won; Shah, Lawrence

    1999-01-01

    We review new developments with a new laser host material, YCa 4 O(BO 3 ) 3 or YCOB. Lasers based on this host material will open new opportunities for the development of compact, high-power, frequency-agile visible and near IR laser sources, as well as sources for ultrashort pulses. Efficient diode-pumped laser action with both Nd-doped and Yb-doped YCOB has already been demonstrated. Moreover, since these materials are biaxial, and have high nonlinear optical coefficients, they have become the first laser materials available as efficient self-frequency-doubled lasers, capable of providing tunable laser emission in several regions of the visible spectrum. Self-frequency doubling eliminates the need for inclusion of a nonlinear optical element within or external to the laser resonator. These laser materials possess excellent thermal and optical properties, have high laser-damage thresholds, and can be grown to large sizes. In addition they are non-hygroscopic. They therefore possess all the characteristics necessary for laser materials required in rugged, compact systems. Here we summarize the rapid progress made in the development of this new class of lasers, and review their potential for a number of applications. (author)

  10. Laser sampling

    International Nuclear Information System (INIS)

    Gorbatenko, A A; Revina, E I

    2015-01-01

    The review is devoted to the major advances in laser sampling. The advantages and drawbacks of the technique are considered. Specific features of combinations of laser sampling with various instrumental analytical methods, primarily inductively coupled plasma mass spectrometry, are discussed. Examples of practical implementation of hybrid methods involving laser sampling as well as corresponding analytical characteristics are presented. The bibliography includes 78 references

  11. HF laser

    International Nuclear Information System (INIS)

    Suzuki, Kazuya; Iwasaki, Matae

    1977-01-01

    A review is made of the research and development of HF chemical laser and its related work. Many gaseous compounds are used as laser media successfully; reaction kinetics and technological problems are described. The hybrid chemical laser of HF-CO 2 system and the topics related to the isotope separation are also included. (auth.)

  12. Efeito da terapia com laser de arsenieto de gálio e alumínio (660Nm sobre a recuperação do nervo ciático de ratos após lesão por neurotmese seguida de anastomose epineural: análise funcional Effect of gallium-aluminum-arsenide laser therapy (660Nm on recovery of the sciatic nerve in rats following neurotmesis lesion and epineural anastomosis: functional analysis

    Directory of Open Access Journals (Sweden)

    FA Reis

    2008-06-01

    Full Text Available CONTEXTUALIZAÇÃO: As lesões nervosas periféricas podem comprometer atividades diárias de um indivíduo e resultam em perda da sensibilidade e motricidade do território inervado. OBJETIVO: Com o intuito de acelerar os processos regenerativos, objetivou-se analisar a influência da aplicação do laser de arsenieto de gálio e alumínio (AsGaAl, 660Nm sobre a recuperação funcional do nervo ciático de ratos. MATERIAIS E MÉTODOS: O nervo ciático de 12 ratos Wistar foi submetido à lesão por neurotmese e anastomose epineural e divididos em dois grupos: controle e laserterapia. Após a lesão, utilizou-se o laser de GaAlAs, 660Nm, 4J/cm², 26,3mW, feixe de 0,63cm², em três pontos eqüidistantes sobre a lesão, por 20 dias. As impressões das pegadas dos animais foram obtidas antes e após (sete, 14 e 21 dias pós-operatórios o procedimento cirúrgico e calculou-se o índice funcional do ciático (IFC. RESULTADOS: A comparação do IFC não resultou em diferença significante (p>0,05 entre os grupos. CONCLUSÕES: Conclui-se que os parâmetros e métodos empregados na laserterapia demonstram resultados nulos sobre o IFC no período avaliado.CONTEXT: Peripheral nerve injuries result in sensory and motor losses in the innervated area and can hinder individuals’ daily activities. Objective: The objective was to analyze the influence of applying gallium-aluminum-arsenide (GaAlAs laser (660Nm on the functional recovery of the sciatic nerve in rats. METHODS: The sciatic nerve of 12 Wistar rats was subjected to injury consisting of neurotmesis and epineural anastomosis. The rats were divided into two groups: control and laser therapy. After the injury, a GaAlAs laser was used (660Nm, 4J/cm², 26.3mW and 0.63cm² beam at three equidistant points on the injury, for 20 days. Footprint impressions were obtained from the animals before and seven, 14 and 21 days after the surgical procedure and the sciatic functional index (SFI was calculated

  13. Laser welding of tailored blanks

    Directory of Open Access Journals (Sweden)

    Peças, P.

    1998-04-01

    Full Text Available Laser welding has an incrising role in the automotive industry, namely on the sub-assemblies manufacturing. Several sheet-shape parts are laser welded, on a dissimilar combination of thicknesses and materials, and are afterwards formed (stamped being transformed in a vehicle body component. In this paper low carbon CO2 laser welding, on the thicknesses of 1,25 and 0,75 mm, formability investigation is described. There will be a description of how the laser welded blanks behave in different forming tests, and the influence of misalignment and undercut on the formibility. The quality is evaluated by measuring the limit strain and limit effective strain for the laser welded sheets and the base material, which will be presented in a forming limit diagram.

    A soldadura laser assume um papel cada vez mais importante na indústria automóvel, principalmente para a fabricação de sub-conjuntos constituídos por varias partes de chapa de diferentes espessuras (e diferentes materiais, que depois de estampados constituem um componente para integrar num veículo. Descreve-se neste artigo o trabalho de investigação de enformabilidade de chapa de ac.o de baixo carbono soldada por laser de CO2, nas espessuras de 1,25 e 0,75 mm. Apresenta-se uma descrição do comportamento das chapas soldadas por laser em diferentes testes de enformação, e a influência dos defeitos das soldaduras (desalinhamento e queda do banho-undercut no comportamento à enformação. A qualidade é avaliada pela medição da extensão limite e da extensão limite efectiva no material base e no material soldado, que serão representadas num diagrama de limite de enformabilidade.

  14. Study in vitro of dental enamel irradiated with a high power diode laser operating at 960 nm: morphological analysis of post-irradiation dental surface and thermal effect analysis in pulp chamber due to laser application; Estudo in vitro do esmalte dental irradiado com laser de diodo de alta potencia em 960 nm: analise morfologica da superficie dental pos-irradiada e analise do comportamento termico na camara pulpar devido a aplicacao laser

    Energy Technology Data Exchange (ETDEWEB)

    Quinto Junior, Jose

    2001-07-01

    Objectives: This study examines the structural and thermal modifications induced in dental enamel under dye assisted diode laser irradiation. The aim of this study is to verify if this laser-assisted treatment is capable to modify the enamel surface by causing fusion of the enamel surface layer. At the same time, the pulpal temperature rise must be kept low enough in order not to cause pulpar necrosis. To achieve this target, it is necessary to determine suitable laser parameters. As is known, fusion of the enamel surface followed by re-solidification produce a more acid resistant layer. This surface treatment is being researched as a new method for caries prevention. Method and Materials: A series of fourteen identically prepared enamel samples of human teeth were irradiated with a high power diode laser operating at 960 nm and using fiber delivery. Prior to irradiation, a fine layer of cromophorous ink was applied to the enamel surface. In the first part of the experiment the best parameter for pulse duration was determined. In the second part of the experimental phase the same energy density was used but with different repetition rates. During irradiation we monitored the temperature rise in the pulpal cavity. The morphology of the treated samples was analysed under SEM. Results: The morphology of the treated samples showed a homogeneously re-solidified enamel layer. The results of the temperature analysis showed a decrease of the pulpal temperature rise with decreasing repetition rate. Conclusion: With the diode laser it is possible to cause morphological alterations of the enamel surface, which is known to increase the enamel resistance against acid attack, and still maintain the temperature rise in the pulpar chamber below damage threshold. (author)

  15. A comparative study of the effect of low laser radiation on mast cells in inflammatory fibrous hyperplasia colored and not colored by the toluidine blue; Estudo comparativo do efeito da radiacao laser em baixa intensidade sobre mastocitos de hiperplasias fibrosas inflamatorias coradas e nao coradas por azul de toluidina

    Energy Technology Data Exchange (ETDEWEB)

    Sawazaki, Iris

    2001-07-01

    THIS STUDY SHOWS A COMPARATIVE ANALYSIS OF THE EFFECTS OF THE LASER RADIATION IN LOW INTENSITY ON THE MAST CELL DEGRANULATION IN INFLAMMATORY FIBROUS HYPERPLASIA WHEN THEY ARE COLORED OR NOT BY THE TOLUIDINE BLUE. THE DYE WAS USED IN ORDER TO INCREASE THE ABSORPTION OF THE LASER LIGHT BY THE TISSUE. THE INJURE WAS DIVIDED IN THREE EQUAL PARTS, AND EACH PART RECEIVED A DIFFERENT KIND OF TREATMENT. ONE OF THEM WAS REMOVED TO BE THE CONTROL, THE SECOND PART WAS LASER TREATED AND THEN IMMEDIATELY REMOVED AND THE LAST ONE, AFTER BEING SUPERFICIALLY COLORED, WAS LASER TREATED AND THEN IMMEDIATELY REMOVED . THE ORDER OF THE STAGES WAS RANDOMLY CHANGED , THEN THE TIME BETWEEN THE STAGES WOULD NOT INTERFERE IN THE STATISTICAL ANALYSIS OF THE MAST CELL DEGRANULATION RATES. IT WAS FOUND THAT THE MAST CELL DEGRANULATION RATES WERE 49% FOR THE CONTROL GROUP, 87% FOR THE LASER GROUP AND 88% FOR THE COLORED/LASER GROUP. THERE WAS NO SIGNIFICANT STATISTICAL DIFFERENCES BETWEEN THE GROUP LASER TREATED AND THE ONE COLORED/LASER TREATED. HOWEVER, THERE WAS A SIGNIFICANT DIFFERENCE BETWEEN THE CONTROL AND THE TREATED GROUP (PS {<=} 0,01). (AUTHOR)

  16. Caracterização microestrutural e textural, por difração de elétrons retro-espalhados (EBSD), da liga de alumínio 5052 soldada a LASER.

    OpenAIRE

    Moreira, Thiago Augusto de Sousa

    2014-01-01

    Programa de Pós-Graduação em Engenharia de Materiais. Rede Temática em Engenharia de Materiais, Pró-Reitoria de Pesquisa e Pós-Graduação, Universidade Federal de Ouro Preto. Atualmente, existe na indústria da mobilidade uma busca constante pelo aumento da produtividade, eficiência, desempenho e redução de peso, custos e emissão de poluentes, o que resulta na busca constante por novas tecnologias. Neste contexto, materiais tradicionais como os aços estão sendo substituídos por outros, como ...

  17. Laser fusion

    International Nuclear Information System (INIS)

    Eliezer, S.

    1982-02-01

    In this paper, the physics of laser fusion is described on an elementary level. The irradiated matter consists of a dense inner core surrounded by a less dense plasma corona. The laser radiation is mainly absorbed in the outer periphery of the plasma. The absorbed energy is transported inward to the ablation surface where plasma flow is created. Due to this plasma flow, a sequence of inward going shock waves and heat waves are created, resulting in the compression and heating of the core to high density and temperature. The interaction physics between laser and matter leading to thermonuclear burn is summarized by the following sequence of events: Laser absorption → Energy transport → Compression → Nuclear Fusion. This scenario is shown in particular for a Nd:laser with a wavelength of 1 μm. The wavelength scaling of the physical processes is also discussed. In addition to the laser-plasma physics, the Nd high power pulsed laser is described. We give a very brief description of the oscillator, the amplifiers, the spatial filters, the isolators and the diagnostics involved. Last, but not least, the concept of reactors for laser fusion and the necessary laser system are discussed. (author)

  18. Biocavity Lasers

    Energy Technology Data Exchange (ETDEWEB)

    Gourley, P.L.; Gourley, M.F.

    2000-10-05

    Laser technology has advanced dramatically and is an integral part of today's healthcare delivery system. Lasers are used in the laboratory analysis of human blood samples and serve as surgical tools that kill, burn or cut tissue. Recent semiconductor microtechnology has reduced the size o f a laser to the size of a biological cell or even a virus particle. By integrating these ultra small lasers with biological systems, it is possible to create micro-electrical mechanical systems that may revolutionize health care delivery.

  19. High power lasers & systems

    OpenAIRE

    Chatwin, Chris; Young, Rupert; Birch, Philip

    2015-01-01

    Some laser history;\\ud Airborne Laser Testbed & Chemical Oxygen Iodine Laser (COIL);\\ud Laser modes and beam propagation;\\ud Fibre lasers and applications;\\ud US Navy Laser system – NRL 33kW fibre laser;\\ud Lockheed Martin 30kW fibre laser;\\ud Conclusions

  20. Effects of 960 nm diode laser irradiation on dental enamel in vitro: temperature and morphological analysis and evaluation of enamel demineralization; Estudo in vitro dos efeitos promovidos pelo laser de diodo em 960 nm no esmalte dental humano: analise de temperatura, analise morfologica e avaliacao da resistencia a desmineralizacao

    Energy Technology Data Exchange (ETDEWEB)

    Kato, Ilka Tiemy

    2004-07-01

    The aim of this study is to determine the effects of diode laser irradiation on enamel demineralization. To achieve this goal appropriate photon absorbing substances for the laser radiation, safe laser parameters and adequate temperature measuring apparatus had to be determined. Next, the effects of diode laser and acidulated phosphate fluoride on enamel demineralization by calcium content analysis were evaluated with inductively coupled plasma atomic emission spectrometry (ICP-AES). In the first part of the study, five dyes consisting of vegetable coal diluted in five different liquids were analyzed and vegetable coal diluted in physiological solution was chosen for use as absorber. Methodologies to measure pulp chamber temperature were evaluated and modeling clay was chosen as fixture for the enamel samples held at body temperature. In the second part of the study, different energy density parameters (1.8 J/cm{sup 2}, 3.7 J/cm{sup 2}, 5.6 J/cm{sup 2}, 7.4 J/cm{sup 2} and 9.3 J/cm{sup 2}) exposure times (10, 15, 20, 25 e 30 seconds) and time intervals between dye application and laser irradiation (5, 30, 60, 90 e 120 seconds) were evaluated with respect to temperature changes in the pulp chamber. The enamel morphology was analyzed by scanning electron microscopy. Acid resistance was measured using seventy five enamel specimens, divided in five groups (control, fluoride, laser, laser + fluoride and fluoride + laser). The amount of calcium lost during demineralization in lactic acid was measured by ICP-AES. The results obtained in this experiment permit the conclusion that diode laser irradiation did not increase acid resistance. When associated with fluoride, the acid resistance did not differ from the results obtained with fluoride alone. (author)

  1. Laser Dyes

    Indian Academy of Sciences (India)

    amplification or generation of coherent light waves in the UV,. VIS, and near IR region. .... ciency in most flashlamp pumped dye lasers. It is used as reference dye .... have led to superior laser dyes with increased photostabilities. For instance ...

  2. Clinical comparative study between the use of lasers and conventional methods of diagnosis and treatment in deciduous teeth with presence of carious lesion; Estudo clinico comparativo entre o uso de lasers e metodos convencionais de diagnostico e tratamento em dentes deciduos da presenca de lesao cariosa

    Energy Technology Data Exchange (ETDEWEB)

    Pulga, Fabiane Galvao

    2001-07-01

    The aim of this work was to evaluate the efficiency of deciduous tooth cavity preparation by the Er:YAG laser in comparison with the conventional burr rotary instrument. Besides, we have used the laser fluorescence technique (DIAGNOdent equipment) for diagnosis and compared it to the usual tactile and visual examination as well as X-ray diagnosis. For this purpose, 20 chronic occlusal carious deciduous molar teeth from children with the ages between 5 to 10 years old were selected. Selection was ma de according to visual inspection, X-ray periapical image and measures of the DIAGNOdent. For treatment the teeth were divided in two groups, 10 to be treated by the Er:YAG laser and 10 with conventional burr. For enamel, the laser energy used was in the interval from 200 to 300 mJ; for the dentine the range was from 100 mJ to 200 mJ. In both cases, the laser frequency was in the range from 2 to 4 Hz. The results have shown that the laser treatment was more accepted by the children than the conventional burro Clinical evaluation of the cavity preparation indicates that the Er:YAG laser treatment is recommend. The DIAGNOdent evaluation method was very effective for diagnosis of carious tissue for initial detection. After successful removal of the carious tissue, confirmed by visual inspection, the DIAGNOdent evaluation method was only effective for the treatment with conventional burro For evaluation of the tooth after cavity preparation with the Er:YAG laser, the measurements oscillate covering the full range of the equipment. Therefore, the use of the DIAGNOdent equipment is indicated only for initial caries diagnosis. (author)

  3. Influência da terapia com laser de baixa potência e hialuronato de sódio de alto peso molecular na ATM de ratos, com artrite, após indução por CFA

    OpenAIRE

    George Azevêdo Lemos

    2015-01-01

    Resumo: A Disfunção temporomandibular (DTM) é uma expressão coletiva que engloba vários sinais e sintomas clínicos relacionados aos músculos da mastigação, articulações temporomandibulares (ATMs) e estruturas associadas. As principais queixas relatadas são ruídos e dor na região da ATM, com maior prevalência em adultos jovens, especialmente mulheres. A inflamação intra-articular é considerada uma das mais importantes fontes de dor nesta disfunção. O processo inflamatório pode se localizar na ...

  4. Laser spectroscopy

    CERN Document Server

    Demtröder, Wolfgang

    2008-01-01

    Keeping abreast of the latest techniques and applications, this new edition of the standard reference and graduate text on laser spectroscopy has been completely revised and expanded. While the general concept is unchanged, the new edition features a broad array of new material, e.g., frequency doubling in external cavities, reliable cw-parametric oscillators, tunable narrow-band UV sources, more sensitive detection techniques, tunable femtosecond and sub-femtosecond lasers (X-ray region and the attosecond range), control of atomic and molecular excitations, frequency combs able to synchronize independent femtosecond lasers, coherent matter waves, and still more applications in chemical analysis, medical diagnostics, and engineering.

  5. Laser spectroscopy

    CERN Document Server

    Demtröder, Wolfgang

    Keeping abreast of the latest techniques and applications, this new edition of the standard reference and graduate text on laser spectroscopy has been completely revised and expanded. While the general concept is unchanged, the new edition features a broad array of new material, e.g., ultrafast lasers (atto- and femto-second lasers) and parametric oscillators, coherent matter waves, Doppler-free Fourier spectroscopy with optical frequency combs, interference spectroscopy, quantum optics, the interferometric detection of gravitational waves and still more applications in chemical analysis, medical diagnostics, and engineering.

  6. Effects of the modified atmosphere and irradiation on the microbiological, physical-chemical and sensory characteristics of the 'minas frescal' cheese;Efeitos da atmosfera modificada e da irradiacao sobre as caracteristicas microbiologicas, fisico-quimicas e sensoriais do queijo minas frescal

    Energy Technology Data Exchange (ETDEWEB)

    Rosa, Vanessa Pires da

    2004-07-01

    The experiment was divided into two parts. Initially, it was studied the 'Minas Frescal' cheeses packed under atmospheric air, modified atmosphere of 70% CO2 and 30% N2 (ATM) and vacuum. Second the cheeses packed under these three treatments had been radiated by doses of 2 KGy. In the two parts of the experiment, it was analyzed the microbial evolution and, the sensory and physical-chemical characteristics of the cheeses under the different treatments during a 4 deg C-storage. In the first phase of the experiment it was verified that the ATM and the vacuum decreased the intensity of the total population growth of aerobic mesophilic and psychotropic and had reduced the population of Staphylococcus positive coagulase, but they had not been efficient controlling the total coliforms and Escherichia coli, while in control all the populations had continuously grown, according to the sensory characteristics of the cheeses, color, odor and appearance. These characteristics were kept the same during the 40 days of storage, and the control decreased the acceptability levels gradually, being rejected in the 17{sup th} day. In the second part of the experiment, it was observed that a 2KGy-irradiation over the 'Minas Frescal' cheeses reduced the populations of aerobic mesophilic, aerobic and anaerobic psychotropic, Staphylococcus positive coagulase, total coliforms and Escherichia coli. The ATM and vacuum treatments were very efficient therefore they prevented the growth of these microorganisms during the storage, while in control, the aerobic mesophilic and psychotropic population grew during the storage. According to sensory aspects, the ATM treatment was the most efficient one, because it kept the appearance, texture and flavor for more than 43 days while the vacuum kept for 36 days and the control for only 8 days. The use of the irradiation with modified atmosphere and low temperatures of storage increased the shelf life of the cheeses, hindering the growth of the microbial populations in the product and keeping product sensory characteristics. (author)

  7. Physical, chemical and sensorial effects of gamma irradiation and cooking on soybean cultivars (Glycine max) with and without lipoxygenase;Efeitos da irradiacao gama e da coccao sobre aspectos fisicos, quimicos e sensoriais de cultivares de soja (Glycine max) com e sem lipoxigenase

    Energy Technology Data Exchange (ETDEWEB)

    Biscaro, Luciana Marino e

    2009-07-01

    The soybean is a vegetable with high nutritional value, mainly due to its high protein content. Among the culture of grains, the soy beam is the most important in Brazil, what represents a greater incentive for the consumption of this food. However, a great claim of occidental consumer is its characteristic odor and flavor, known as beany flavor, which is provided by the action of lipoxygenase enzyme. The catalytic action exerted by this type of isoenzyme on polyunsaturated fatty acids, linolenic and linoleic acid of the soy grains, is one of the main factors responsible for the appearance of the carbonyl compounds, which cause the unpleasant flavor in grains. To enhance the organoleptic characteristics of soybeans, researchers have developed new cultivars, without the presence of lipoxygenase. The objective of this study was to evaluate physical, chemical and sensorial differences between the two soy cultivar, with and without lipoxygenases (cultivars BRS 232 and BRS 257, of EMBRAPA, respectively) and to analyze the possible changes promoted by different radiation doses (0, 4 and 8 kGy) in raw and cooked soybean grains. The physical analyses were: time of cooking and hydration of the grains. The chemical analyses were: centesimal composition, protein digestibility, anti nutritional factors, isoflavone content and antioxidant capacity (DPPH and ABTS). The sensory aspects were determined by sensorial analysis performed by applying analytical methods of differentiation for selection of panelists, and descriptive method to determine the quality of the soybean. At the end, factorial statistical analysis was performed 3x2x2 (irradiation doses X cultivars x treatment) for analysis, comparison and discussion of the obtained results. The results showed differences in physical analyses with the irradiation and between the two cultivars. Besides, the cultivars presented differences in the centesimal composition, digestibility fenolic content, isoflavone content and trypsin inhibitor. Cooking promoted difference in all the studied components, except for the proteic digestibility of the grains. On the other hand, the irradiation affected the anti nutritional contents, the proteic digestibility and the content of aglicone isoflavones. Data from sensory analysis showed that the taste and the texture of the samples didn't differ between the cultivars and were not affected by the irradiation. (author)

  8. Employment of MCNP in the study of TLDS 600 and 700 seeking the implementation of radiation beam characterization of BNCT facility at IEA-R1; Emprego do MCNP no estudo dos TLDS 600 e 700 visando a implementacao da caracterizacao do feixe de irradiacao da instalacao de BNCT do IEA-R1

    Energy Technology Data Exchange (ETDEWEB)

    Cavalieri, Tassio Antonio

    2013-07-01

    Boron Neutron Capture Therapy, BNCT, is a bimodal radiotherapy procedure for cancer treatment. Its useful energy comes from a nuclear reaction driven by impinging thermal neutron upon Boron 10 atoms. A BNCT research facility has been constructed in IPEN at the IEA-R1 reactor, to develop studies in this area. One of its prime experimental parameter is the beam dosimetry which is nowadays made by using activation foils, for neutron measurements, and TLD 400, for gamma dosimetry. For mixed field dosimetry, the International Commission on Radiation Units and Measurements, ICRU, recommends the use of pair of detectors with distinct responses to the field components. The TLD 600/ TLD 700 pair meets this criteria, as the amount of {sup 6}Li, a nuclide with high thermal neutron cross section, greatly differs in their composition. This work presents a series of experiments and simulations performed in order to implement the mixed field dosimetry based on the use of TLD 600/TLD 700 pair. It also intended to compare this mixed field dosimetric methodology to the one so far used by the BNCT research group of IPEN. The response of all TLDs were studied under irradiations in different irradiation fields and simulations, underwent by MCNP, were run in order to evaluate the dose contribution from each field component. Series of repeated irradiations under pure gamma field and mixed field neutron/gamma field showed differences in the TLD individual responses which led to the adoption of a Normalization Factor. It has allowed to overcome TLD selection. TLD responses due to different field components and spectra were studied. It has shown to be possible to evaluate the relative gamma/neutron fluxes from the relative responses observed in the two Regions of Interest, ROIs, from TLD 600 and TLD 700. It has also been possible to observe the TLD 700 response to neutron, which leads to a gamma dose overestimation when one follows the ICRU recommended mixed field dosimetric procedure. Dose response curves were obtained for the distinct types of TLDs for pure gamma and mixed fields. This work recommends the TLD 600/TLD 700 pair methodology for mixed field dosimetry, due to present a better precision than the one based on TLD 400, however one has to be careful to avoid gamma dose super estimation. (author)

  9. Morphological evaluation of cavity preparation surface after duraphat and Er:YAG laser treatment by scanning electronic microscopy; Avaliacao das alteracoes morfologicas da superficie do preparo cavitario apos condicionamento com verniz fluoretado a 2,26 % e laser de Er:YAG atraves de microscopia eletronica de varredura

    Energy Technology Data Exchange (ETDEWEB)

    Rodrigues, Luciane Borelli

    2002-07-01

    The treatment of dental surface using different lasers to prevent dental caries has been studied for several on last years. The purpose of this in vitro study was to evaluate the morphological changes on dentin surface from pulpal wall of cavity preparations performed by high-speed drill, treated with 2,26% fluoride varnish (Duraphat) and Er:YAG laser, and then submitted after receiving or not to EDTA 15% treatment. Twenty Class V cavities were performed on ten humans molars. The specimens were randomly divided in to 4 groups: group 1- treatment with Duraphat followed by Er:YAG laser irradiation (120 mJ/ 4 Hz); group 2: Er:YAG laser irradiation, same parameters, followed by Duraphat treatment; group 3- same group 1 followed by immersion in EDTA (5 min); group 4 - same as group 2 followed by immersion in EDTA (5 min). The specimens were processed for SEM analysis. The micrographs showed that Duraphat treatment promoted morphological changes on dentin, closing dentinal tubules; the specimens treated by Duraphat and Er:YAG laser and immersed in EDTA (group 3) showed homogeneous surface, closed and protected dentinal tubules, maintenance of the fluoride varnish on the dentin surface and around the dentinal tubules, showing feasible and efficiency of these therapies the feasibility.(author)

  10. Analysis of the collagen birefringence and the relative attenuation coefficient of health and burned skin irradiated with linearly polarized He-Ne laser; Analise da birrefringencia do colageno e do coeficiente de atenuacao de amostras de pele sadia e queimada irradiadas pelo laser de He-Ne linearmente polarizado

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Daniela de Fatima Teixeira da

    2002-07-01

    Low-intensity laser therapy is characterized by its ability to induce athermic effects and nondestructive photobiological processes. Although it has been in use for more than 40 years, this phototherapy is still not an established therapeutic modality. The objectives of this study were: to quantify the collagen fibers organization by polarized light microscopy in normal and burned skin samples at day 17 post-injury considering preferential axis as the animal's spinal column and aligning the linear laser polarization in two directions of polarization, parallel or perpendicular to this axis; to determine the relative attenuation coefficient for the intensity light by the technique of imaging the light distribution in normal and burned skin during wound healing process taking only parallel direction of polarization. To reach the objectives, burns about 6 mm in diameter were created with liquid N{sub 2} on the back of the rats and the lesions were irradiated on days 3, 7, 10 and 14 post-wounding, D= 1 J/cm{sup 2}, to investigate the effects of low-intensity linearly polarized He-Ne laser beam on skin wounds healing. Control lesions were not irradiated. The results have demonstrated that: the skin samples irradiated with linearly parallel polarized He-Ne laser beam showed collagen fibers more organized; burned skin samples presents a higher attenuation coefficient than normal skin samples. These results are important to optimize low intensity laser therapy dosimetry on acceleration wound healing. (author)

  11. Evaluation of the tensile bond strength of an adhesive system self-etching in dentin irradiated with Er:YAG laser; Avaliacao da resistencia a tracao de um sistema adesivo self-etching em dentina irradiada com Er:YAG laser

    Energy Technology Data Exchange (ETDEWEB)

    Mello, Andrea Malluf Dabul de

    2000-07-01

    Since Buonocore (1955), several researchers have been seeking for the best adhesive system and treatment for the enamel and dentin surfaces. The use of the acid has been presented as one of the best techniques of dentin conditioning , because this promotes the removal of the 'smear layer and exhibition of dentinal structure, for a best penetration and micro- retention of the adhesive system. However, some conditioning methods have been appearing in the literature, for the substitution or interaction with the acid substances, as the laser. The objective of this work is to evaluate the tensile bond strength of the adhesive system self-etching' associated to a composed resin, in dentin surfaces conditioned with the Er:YAG laser. For this study, freshly extracted human teeth were used and in each one the dentinal surfaces , which were treated with three sandpapers of different granulations (120,400,600), to obtain a standard of the smear layer, before the irradiation of the laser and of the restoring procedure. After these procedures the specimens were storage in distilled water at 37 deg C for 24 hours. Soon after, they were submitted to the tensile strength test .After analyzing the results, we can concluded that the use of the Er:YAG laser can substitute the drill without the need of conditioning, when using the adhesive system 'self-etching' in the dentinal surfaces because there was a decline in the strength of adhesion in the groups conditioned with the laser. (author)

  12. Filosofia da análise da estabilidade da liquidez

    Directory of Open Access Journals (Sweden)

    Rodrigo Antônio Chaves da Silva

    2005-07-01

    Full Text Available A informação foi considerada finalidade de nosso conhecimento, até o período em os pensadores e pesquisadores da contabilidade passaram a raciocinar sobre o conteúdo e o significado dos informes. Nesta busca da razão sobre os estados patrimoniais, surgiu a análise contábil que procura por meio de relações e identidades, o significado da dinâmica expressa da estaticamente na informação. O primeiro aspecto que surgiu no objeto de análise foi o estudo da liquidez, que é um dos principais exercícios do patrimônio. A estabilidade também é outro exercício básico e imprescindível, pois este é que promove o equilíbrio do organismo administrativo. A ciência contábil após a sua dignidade científica passou a trilhar caminhos esplendorosos, amparados em doutrina que permite alcançar os píncaros filosóficos. Os estudos concernentes aos aspectos de interação da estabilidade na liquidez são, complexos e somente com os recursos filosóficos da contabilidade se pode estudá-los com o panorama holístico e sublime. A filosofia da contabilidade não é alheia às suas práticas tecnológicas, podendo buscar pontos sublimes de panoramas abrangentes, para o estudo analítico da liquidez e estabilidade, observando todas as dimensionalidades e essencialidades de acontecimentos, na comprovação e orientação dos estados de ineficácia e eficácia patrimonial.

  13. Il laser

    CERN Document Server

    Smith, William V

    1974-01-01

    Verso il 1960, il laser era ancora "una soluzione alla ricerca di un problema", ma fin dagli anni immediatamente successivi si è rivelato uno strumento insostituibile per le applicazioni più svariate.

  14. Laser Refractography

    CERN Document Server

    Rinkevichyus, B.S; Raskovskaya, I.L

    2010-01-01

    This book describes the basic principles of laser refractography, a flexible new diagnostic tool for measuring optically inhomogeneous media and flows. Laser refractography is based on digital imaging and computer processing of structured laser beam refraction (SLR) in inhomogeneous transparent media. Laser refractograms provide both qualitative and quantitative measurements and can be used for the study of fast and transient processes. In this book, the theoretical basis of refractography is explored in some detail, and experimental setups are described for measurement of transparent media using either 2D (passed radiation) or 3D (scattered radiation) refractograms. Specific examples and applications are discussed, including visualization of the boundary layer near a hot or cold metallic ball in water, and observation of edge effects and microlayers in liquids and gases. As the first book to describe this new and exciting technique, this monograph has broad cross-disciplinary appeal and will be of interest t...

  15. Laser fusion

    International Nuclear Information System (INIS)

    Ashby, D.E.T.F.

    1976-01-01

    A short survey is given on laser fusion its basic concepts and problems and the present theoretical and experimental methods. The future research program of the USA in this field is outlined. (WBU) [de

  16. Laser spectroscopy

    International Nuclear Information System (INIS)

    Letokhov, V.S.

    1981-01-01

    This article describes recent progress in the application of laser atomic spectroscopy to study parameters of nuclei available in very small quantities; radioactive nuclei, rare isotopes, nuclear isomers, etc, for which study by conventional spectroscopic methods is difficult. (author)

  17. Laser fusion

    International Nuclear Information System (INIS)

    Key, M.H.; Oxford Univ.

    1990-04-01

    The use of lasers to drive implosions for the purpose of inertially confined fusion is an area of intense activity where progress compares favourably with that made in magnetic fusion and there are significant prospects for future development. In this brief review the basic concept is summarised and the current status is outlined both in the area of laser technology and in the most recent results from implosion experiments. Prospects for the future are also considered. (author)

  18. Laser Resurfacing

    OpenAIRE

    Janik, Joseph P.; Markus, Jodi L.; Al-Dujaili, Zeena; Markus, Ramsey F.

    2007-01-01

    In a society desiring images of beauty and youthfulness, the world of cutaneous surgery offers the gifts of facial rejuvenation for those determined to combat the signs of aging. With the development of novel laser and plasma technology, pigmentary changes, scarring, and wrinkles can be conquered providing smoother, healthier, younger-looking skin. This review highlights five of the most popular resurfacing technologies in practice today including the carbon dioxide (CO2) laser, the erbium:yt...

  19. Green lasers

    DEFF Research Database (Denmark)

    Jensen, Ole Bjarlin

    2010-01-01

    Well over a dozen papers at this year's Photonics West meeting in San Francisco boasted improvements in harmonic generation to produce visible laser beams, most of them in the green spectral range......Well over a dozen papers at this year's Photonics West meeting in San Francisco boasted improvements in harmonic generation to produce visible laser beams, most of them in the green spectral range...

  20. Laser de érbio 2940nm fracionado no tratamento do fotoenvelhecimento cutâneo da face - avaliação após 15 meses

    Directory of Open Access Journals (Sweden)

    Ane Beatriz Mautari Niwa

    2010-03-01

    Full Text Available Introdução: Os procedimentos fracionados ablativos oferecem resultados consistentes, com menor tempo de recuperação e menor risco de efeitos adversos do que os ablativos não fracionados. Objetivo: Avaliar os efeitos de uma nova tecnologia fracionada ablativa com laser de érbio (2.940nm no fotoenvelhecimento facial.Métodos: Pacientes femininas com fotodano moderado na face foram submetidas ao tratamento com laser de érbio 2,940 nm fracionado (Palomar Inc., Burlington MA. Os parâmetrosvariaram de 5 a 9 mJ/µb com duração de pulso de 250 microssegundos a 5 milissegundos. Foram realizadas duas a seis passadas com 50% de sobreposição. As avaliações clínicasocorreram 3 dias, 1,4,8 e 12 semanas, e 15 meses após o procedimento. Três dermatologistas não envolvidos no estudo avaliaram a melhora global do fotodano antes e após 3 meses, através de fotografias digitais e de acordo com a seguinteescala: grau 1=melhora menor que 25%; grau 2=melhora de 26-50%; grau 3=melhora de 51-75% e grau 4=melhora de 76 a 100%.Resultados: Doze pacientes (n=12 femininas, com idade variando de 48 a 78 anos foram incluídas.A avaliação após 3 meses, demonstrou que 23% das pacientes obtiveramgrau 3, 55% grau 2 e 22% grau 1. Melhora significativa (grau > 2 foi observada em 78% e 63% das rugas periorbitárias e periorais respectivamente. Dois pacientes desenvolveramhiperpigmentação pós-inflamatória transitória. Conclusão: O laser com érbio fracionado mostrou-se eficaz e seguro no tratamento do fotoenvelhecimento moderado.Use of 2940 Erbium fractional laser in the treatment of photodamaged skin: clinical evaluation and follow up.

  1. In vitro assessment of the bactericidal effect of low-power arsenium-gallium (AsGa laser treatment Avaliação in vitro da ação bactericida do laser de baixa potência (AsGa

    Directory of Open Access Journals (Sweden)

    Adilvania Ferreira da Costa

    2012-08-01

    Full Text Available The objective of the present study was to perform an in vitro evaluation of the bactericidal action of a low-power arsenium-gallium (AsGa laser at a wavelength of 904nm and energy density of 6 J/cm². Ten petri dishes were seeded with Pseudomonas aeruginosa and another ten with Staphylococcus aureus. The dishes were then randomly divided into four groups with five plates in each group. Two groups were treated with AsGa laser once a day for 5 days, while the other two groups received no treatment. No halo of growth inhibition was found in any of the groups. It was therefore concluded that laser treatment (AsGa, 904nm, 6J/cm² had no bactericidal effect.Verificar, in vitro, o efeito bactericida do laser de baixa potência, AsGa, 904nm, na dose 6 J/cm2. Foram semeadas 10 placas de Petri com a bactéria Pseudomonas aeruginosa e 10 placas de Petri com Staphylococcus aureus. Aleatoriamente, foram divididas em quatro grupos (5 placas cada: dois grupos foram tratados com o laser AsGa a cada 24 horas, durante cinco dias, e dois grupos não receberam tratamento. Em todos os grupos, não foi observado qualquer halo de inibição do crescimento. Assim, concluiuse que a terapia a laser (AsGa, 904nm, 6 J/cm² não produziu efeito bactericida.

  2. LASER hemorrhoidal dearterialization

    Directory of Open Access Journals (Sweden)

    Paulo Boarini

    2017-01-01

    Full Text Available Introduction: Hemorrhoidal disease is associated with the theory of arterial blood hyperflow causing swellings in hemorrhoids and, consequently, hyperplasia and venous congestion. The technique helps to promote the obliteration of the terminals of the superior rectal artery branches without the need for anesthesia by electrofulguration with diode fiber LASER. The objective of this study is to describe the results of 55 patients with hemorrhoidal disease treated by the Hemorrhoidal LASER Procedure technique. Method: Without the need of anesthesia, terminal arterioles of the upper rectal artery are identified by a Doppler transducer (20 MHz probe 3 mm placed on a specially designed proctoscope. After identification, it promotes arteriolar electrofulguration at 980 nm fiber laser diode, causing interruption of hemorrhoidal flow. This procedure is repeated circumferentially, following the clockwise positions. Results: Between 2011 and 2014, 55 patients underwent the Hemorrhoidal LASER Procedure technique for hemorrhoidal disease grades I, II and III. There was no need for anesthesia and only two patients required sedation for the procedure. The overall satisfaction rate was 89%, with symptom resolution in 84% and a decrease of at least one grade in hemorrhoidal disease in 80% of cases. Conclusion: Hemorrhoidal LASER Procedure is a painless outpatient technique that does not require anesthesia, in addition to being safe and easy to perform. It is effective in reducing symptoms and complications of the hemorrhoidal disease grades I and II, with high satisfaction rates. Resumo: Introdução: A doença hemorroidária está associada a teoria vascular de hiperfluxo arterial causando dilatações nos plexos hemorroidários e, consequentemente, hiperplasia e congestão venosa. A técnica HeLP promove a obliteração dos ramos terminais da artéria retal superior, sem a necessidade de anestesia, através da eletrofulguração com fibra de diiodo LASER

  3. Influência de diferentes comprimentos de onda da laserterapia de baixa intensidade na regeneração tendínea do rato após tenotomia Influence of different low-intensity laser therapy wavelengths for rat tendon regeneration following tenotomy

    Directory of Open Access Journals (Sweden)

    ERB Arruda

    2007-08-01

    Full Text Available OBJETIVO: Comparar a influência da terapia laser baixa intensidade (TLBI na organização das fibras de colágeno, na dose de 3J/cm² em dois comprimentos de onda (lambda (670nm e 904nm e na associação de ambos, durante o reparo do tendão calcâneo de ratos. MÉTODO Foram utilizadas 37 ratas da raça Wistar divididas em 5 grupos, submetidas a tenotomia total por meio de cisalhamento transversal do tendão na porção média entre a inserção calcânea e a junção miotendínea, com exceção do grupo GP (n= 6 que não houve lesão. O grupo GA (n= 8 foi submetido à irradiação laser lambda= 904nm, diodo de GaAs, emissão pulsada, duração do pulso de 180ns, freqüência de pulso de 2000Hz e potência de pico de 15W e dose de 3J/cm². O grupo GB (n= 8 foi submetido à irradiação laser lambda= 670nm, diodo de AlGaInP, emissão contínua, potência 30mW e dose de 3J/cm². O grupo GAB (n= 8 recebeu irradiação de ambos os lasers 670nm e 904nm associados. O grupo GCL (n= 7 foi submetido a um tratamento placebo, assim como um grupo padrão. Após um total de 12 sessões de laserterapia, os animais foram submetidos à eutanásia no 14º dia pós-operatório. Após processamento histológico padrão, foi realizada a quantificação do retardo óptico pela birrefringência. RESULTADOS: A análise estatística mostra que todos os grupos irradiados apresentaram valores de retardo óptico maiores quando comparados ao grupo placebo (p= 0,00001, o que indica que apresentaram melhor organização das fibras colágenas ao longo do eixo longitudinal do tendão, evidenciando melhor qualidade no reparo. O grupo GAB foi o que apresentou melhores resultados (p= 0,00001 quando comparado aos demais grupos, excetuando-se o GP, que é o referencial de retardo óptico para esta faixa etária.OBJECTIVE: The aim of this study was to compare the effect of the low level laser therapy in the organization of the collagen fibers with 3 J/cm² of dose in two

  4. Laser material processing

    CERN Document Server

    Steen, William

    2010-01-01

    This text moves from the basics of laser physics to detailed treatments of all major materials processing techniques for which lasers are now essential. New chapters cover laser physics, drilling, micro- and nanomanufacturing and biomedical laser processing.

  5. Laser therapy for cancer

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/patientinstructions/000905.htm Laser therapy for cancer To use the sharing features ... Lasers are also used on the skin. How Laser Therapy is Used Laser therapy can be used ...

  6. Lasers in Cancer Treatment

    Science.gov (United States)

    ... the advantages of laser therapy? What are the disadvantages of laser therapy? What does the future hold ... therapy is appropriate for them. What are the disadvantages of laser therapy? Laser therapy also has several ...

  7. Practical laser safety

    International Nuclear Information System (INIS)

    Winburn, D.C.

    1985-01-01

    This book includes discussions of the following topics: characteristics of lasers; eye components; skin damage thresholds; classification of lasers by ANSI Z136.1; selecting laser-protective eyewear; hazards associated with lasers; and, an index

  8. Effects of low-intensity GaAlAs laser radiation ({lambda}=660 nm) on dentine-pulp interface after class I cavity preparation; Efeitos da radiacao laser GaAlAs ({lambda}=660 nm) em baixa intensidade na interface dentina-polpa pos-preparo cavitario classe 1

    Energy Technology Data Exchange (ETDEWEB)

    Godoy, Bruno Miranda

    2003-07-01

    The aim of this study was to investigate the effects of low-intensity irradiation with GaAlAs laser (red emission) on the ultrastructure of dentine-pulp interface after conventionally prepared class I cavity preparation. Two patients with 8 premolars for extraction indicated for orthodontic reasons. Class I cavities were prepared in these teeth that were then divided into two groups. The first group received a treatment with laser with continuous emission, {lambda}=660 nm, with maximum power output of 30 mW. The dosimetry applied was of approximately 2J/cm{sup 2}, directly and perpendicularly into the cavity in only one section. After the irradiation, the cavities were filled with composite resin. The second group received the same treatment, except by the laser therapy. Twenty-eight days after the preparation, the teeth were extracted and were processed for transmission electron microscopy analysis. Two sound teeth, without any preparation, were also studied. The irradiated group presented odontoblastic processes in higher contact with the extracellular matrix and the collagen fibers appeared more aggregated and organized than those of control group. These results were also observed in the healthy-teeth. Thus, we suggest that laser irradiation accelerates the recovery of the dental structures involved in the cavity preparation at the pre-dentine level. (author)

  9. Laser acceleration

    Science.gov (United States)

    Tajima, T.; Nakajima, K.; Mourou, G.

    2017-02-01

    The fundamental idea of Laser Wakefield Acceleration (LWFA) is reviewed. An ultrafast intense laser pulse drives coherent wakefield with a relativistic amplitude robustly supported by the plasma. While the large amplitude of wakefields involves collective resonant oscillations of the eigenmode of the entire plasma electrons, the wake phase velocity ˜ c and ultrafastness of the laser pulse introduce the wake stability and rigidity. A large number of worldwide experiments show a rapid progress of this concept realization toward both the high-energy accelerator prospect and broad applications. The strong interest in this has been spurring and stimulating novel laser technologies, including the Chirped Pulse Amplification, the Thin Film Compression, the Coherent Amplification Network, and the Relativistic Mirror Compression. These in turn have created a conglomerate of novel science and technology with LWFA to form a new genre of high field science with many parameters of merit in this field increasing exponentially lately. This science has triggered a number of worldwide research centers and initiatives. Associated physics of ion acceleration, X-ray generation, and astrophysical processes of ultrahigh energy cosmic rays are reviewed. Applications such as X-ray free electron laser, cancer therapy, and radioisotope production etc. are considered. A new avenue of LWFA using nanomaterials is also emerging.

  10. Laser acceleration

    International Nuclear Information System (INIS)

    Tajima, T.; Nakajima, K.; Mourou, G.

    2017-01-01

    The fundamental idea of LaserWakefield Acceleration (LWFA) is reviewed. An ultrafast intense laser pulse drives coherent wakefield with a relativistic amplitude robustly supported by the plasma. While the large amplitude of wake fields involves collective resonant oscillations of the eigenmode of the entire plasma electrons, the wake phase velocity ∼ c and ultra fastness of the laser pulse introduce the wake stability and rigidity. A large number of worldwide experiments show a rapid progress of this concept realization toward both the high-energy accelerator prospect and broad applications. The strong interest in this has been spurring and stimulating novel laser technologies, including the Chirped Pulse Amplification, the Thin Film Compression, the Coherent Amplification Network, and the Relativistic Mirror Compression. These in turn have created a conglomerate of novel science and technology with LWFA to form a new genre of high field science with many parameters of merit in this field increasing exponentially lately. This science has triggered a number of worldwide research centers and initiatives. Associated physics of ion acceleration, X-ray generation, and astrophysical processes of ultrahigh energy cosmic rays are reviewed. Applications such as X-ray free electron laser, cancer therapy, and radioisotope production etc. are considered. A new avenue of LWFA using nano materials is also emerging.

  11. Estudo da microcirculação na hanseníase usando videomicroscopia (Microscan) e laser-Doppler associado à iontoforese: um modelo de disautonomia vascular por denervação

    OpenAIRE

    Livia Cristina de Melo Pino Machado

    2013-01-01

    A hanseníase é uma doença infecciosa com características únicas, dentre elas o fato de atingir intensamente a inervação da pele e seus anexos. Entremeando estes anexos, está a microcirculação cutânea, que a principio também tem sua inervação comprometida. Vários artigos apontam para alterações de disautonomiamicrocirculatória. O presente estudo se propõe a avaliar a microcirculação cutânea na hanseníase tuberculóide. Utilizamos a videomicroscopia de campo escuro (Microscan), a análise de Four...

  12. Ablation of burned skin with ultra-short pulses laser to promote healing: evaluation by optical coherence tomography, histology, {mu}ATR-FTIR and Nonlinear Microscopy; Ablacao de pele queimada com laser de pulsos ultra-curtos para promocao da cicatrizacao: avaliacao por tomografia por coerencia optica, histologia, {mu}ATR-FTIR e microscopia nao-linear

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Moises Oliveira dos

    2012-07-01

    Burns cause changes in the anatomical structure of the skin associated with trauma. The severity of the burn injury is divided into first, second and third-degree burns. The third-degree burns have been a major focus of research in search of more conservative treatments and faster results in repair for a functional and cosmetically acceptable. The conventional treatment is the use of topical natural or synthetic skin graft. An alternative therapy is the laser ablation process for burned tissue necrosis removal due to the no mechanical contact, fast application and access to difficult areas. The purpose of this study is to evaluate the feasibility of using high intensity femtosecond lasers as an adjunct treatment of burned patients. For this study, 65 Wistar rats were divided into groups of five animals: healthy skin, burned skin, two types of treatment (surgical debridement or femtosecond laser ablation) and four different times in the healing process monitoring. Three regions of the back of the animals were exposed to steam source causing third-degree burn. On the third day after the burn, one of the regions was ablated with high intensity ultrashort laser pulses ({lambda} = 785 nm, 90 fs, 2 kHz and 10 {mu}J/ pulse), the other received surgical debridement, and the last was considered the burn control. The regions were analyzed by optical coherence tomography (OCT), histology, attenuated total reflectance infrared spectroscopy using Fourier transform ({mu}-ATR-FTIR), two-photon excitation fluorescence microscopy (TPEFM) and second harmonic generation technique (SHG) on days 3, 5, 7 and 14 pos-treatments. The results showed that with the laser irradiation conditions used it was possible to remove debris from third degree burn. The techniques used to characterize the tissue allowed to verify that all treatments promoted wound healing. On the fourteenth day, the regeneration curve showed that the attenuation coefficient of laser ablated tissue converges to the values

  13. Laser Heterodyning

    CERN Document Server

    Protopopov, Vladimir V

    2009-01-01

    Laser heterodyning is now a widespread optical technique, based on interference of two waves with slightly different frequencies within the sensitive area of a photo-detector. Its unique feature – preserving phase information about optical wave in the electrical signal of the photo-detector – finds numerous applications in various domains of applied optics and optoelectronics: in spectroscopy, polarimetry, radiometry, laser radars and Lidars, microscopy and other areas. The reader may be surprised by a variety of disciplines that this book covers and satisfied by detailed explanation of the phenomena. Very well illustrated, this book will be helpful for researches, postgraduates and students, working in applied optics.

  14. Mast cells behavior analysis: non mineralized wall of suprabony periodontal pockets submitted to low intensity laser radiation. (An in anima nobile study); Verificacao do comportamento de mastocitos na parede nao mineralizada da bolsa periodontal supra-ossea submetida a radiacao laser de baixa intensidade. (Estudo in anima nobile)

    Energy Technology Data Exchange (ETDEWEB)

    Silveira, Livio de Barros

    2001-07-01

    For this study 20 patients with periodontal disease were selected. The treatment required for all of then was the gingivectomy, a ressective periodontal surgery. This technique consists of removing the whole excess of gingival tissue with the intent of reestablishing the anatomy and the correct function. The gingival area was submitted to 2 different wavelengths and then histologically analysed to search for alterations, mainly concerning mast cells behavior, a blood cell responsible, among other things, for blood vases enlargement. During the surgical procedure each gingival area was submitted to infrared low intensity laser ({lambda} = 785 nm) or to red laser ({lambda} = 688 nm), both with 50 mW of power and fluence of 8 J/cm{sup 2}. A third area was analysed, the control area, in which no laser treatment was employed. The samples were fixated in formol, cut and stained by hematoxyline eosine and toluidine blue. Based on the result we can conclude: the 2 wavelengths used in this study led to the reduction in the number of mast cells present in the tissue as well as to the increase on the degranulation of the remaining mast cells, considered statistically significant taken the degranulation index and; there was no significant difference caused by the action of the two laser wavelengths {lambda}=785 nm and {lambda}=688 nm -50 mW of power and fluence of 8 J/cm{sup 2}-, over the degranulation of the mast cells; the length and width of the randomly chosen blood vases were not statistically different among the analysed groups. (author)

  15. A Sintaxe da Janela

    Directory of Open Access Journals (Sweden)

    Luís Antônio Jorge

    1993-12-01

    Full Text Available A preocupação fundamenta! do trabalho é de caráter ontológico: esboçar o problema das significações apriorísticas e autônomas dos elementos que compõem a sintaxe arquitetônica. O trabalho elege um desses elementos: a janela. Este artigo parte da aproximação histórica entre a janela e a secção da pirâmide visual, construção imaginária da teoria da perspectiva renascentista. A consideração da janela na linguagem arquitetônica implica reconhecer uma ambigüidade essencial: a janela deve inserir-se ordenadamente no plano da parede - raciocínio típico da modenatura - mas também relacionar-se com a imagem vista através dela, que extrapola o plano, ressaltando a tridimensionalidade - herança da perspectiva renascentista, fundamentada no espaço euclidiano. Ver janela ou ver através da janela são alternativas que se colocam tanto ao observador interno ao edifício, quanto ao externo. Texto de duplaface, a sintaxe da janela versa sobre o relacionamento desses dois lados

  16. Laser polarimetry

    International Nuclear Information System (INIS)

    Goldstein, D.H.

    1989-01-01

    Polarimetry, or transmission ellipsometry, is an important experimental technique for the determination of polarization properties of bulk materials. In this technique, source radiation of known polarization is passed through bulk samples to determine, for example, natural or induced birefringence and dichroism. The laser is a particularly appropriate source for this technique because of its monochromaticity, collimation, and radiant intensity. Lasers of many different wavelengths in different spectral regions are now available. Laser polarimetry can be done in any of these wavelength regions where polarizing elements are available. In this paper, polarimetry is reviewed with respect to applications, sources used, and polarization state generator and analyzer configurations. Scattering ellipsometry is also discussed insofar as the forward scattering measurement is related to polarimetry. The authors then describe an infrared laser polarimeter which we have designed and constructed. This instrument can operate over large wavelength regions with only a change in source. Polarization elements of the polarimeter are in a dual rotating retarder configuration. Computer controlled rotary stages and computer monitored detectors automate the data collection. The Mueller formulation is used to process the polarization information. Issues and recent progress with this instrument are discussed

  17. excimer laser

    Indian Academy of Sciences (India)

    2014-01-07

    Jan 7, 2014 ... is necessary to deposit one order higher input electric power into gas medium than ... cross-sectional view of the laser system is shown in figure 2A. The system mainly consists ... Considering the simplicity and reliability of the.

  18. Laser device

    DEFF Research Database (Denmark)

    2013-01-01

    The present invention provides a light source for light circuits on a silicon platform. A vertical laser cavity is formed by a gain region arranged between a first mirror structure and a second mirror structure, both acting as mirrors, by forming a grating region including an active material...

  19. Nanowire Lasers

    Directory of Open Access Journals (Sweden)

    Couteau C.

    2015-05-01

    Full Text Available We review principles and trends in the use of semiconductor nanowires as gain media for stimulated emission and lasing. Semiconductor nanowires have recently been widely studied for use in integrated optoelectronic devices, such as light-emitting diodes (LEDs, solar cells, and transistors. Intensive research has also been conducted in the use of nanowires for subwavelength laser systems that take advantage of their quasione- dimensional (1D nature, flexibility in material choice and combination, and intrinsic optoelectronic properties. First, we provide an overview on using quasi-1D nanowire systems to realize subwavelength lasers with efficient, directional, and low-threshold emission. We then describe the state of the art for nanowire lasers in terms of materials, geometry, andwavelength tunability.Next,we present the basics of lasing in semiconductor nanowires, define the key parameters for stimulated emission, and introduce the properties of nanowires. We then review advanced nanowire laser designs from the literature. Finally, we present interesting perspectives for low-threshold nanoscale light sources and optical interconnects. We intend to illustrate the potential of nanolasers inmany applications, such as nanophotonic devices that integrate electronics and photonics for next-generation optoelectronic devices. For instance, these building blocks for nanoscale photonics can be used for data storage and biomedical applications when coupled to on-chip characterization tools. These nanoscale monochromatic laser light sources promise breakthroughs in nanophotonics, as they can operate at room temperature, can potentially be electrically driven, and can yield a better understanding of intrinsic nanomaterial properties and surface-state effects in lowdimensional semiconductor systems.

  20. Excimer Laser Technology

    CERN Document Server

    Basting, Dirk

    2005-01-01

    This comprehensive survey on Excimer Lasers investigates the current range of the technology, applications and devices of this commonly used laser source, as well as the future of new technologies, such as F2 laser technology. Additional chapters on optics, devices and laser systems complete this compact handbook. A must read for laser technology students, process application researchers, engineers or anyone interested in excimer laser technology. An effective and understandable introduction to the current and future status of excimer laser technology.

  1. Laser ion sources

    Energy Technology Data Exchange (ETDEWEB)

    Bykovskij, Yu

    1979-02-01

    The characteristics a laser source of multiply-ionized ions are described with regard to the interaction of laser radiation and matter, ion energy spectrum, angular ion distribution. The amount of multiple-ionization ions is evaluated. Out of laser source applications a laser injector of multiple-ionization ions and nuclei, laser mass spectrometry, laser X-ray microradiography, and a laser neutron generators are described.

  2. Complicações na dacriocistorrinostomia transcanalicular com laser diodo: complications Transcanalicular dacryocystorhinostomy with diode laser

    Directory of Open Access Journals (Sweden)

    Eduardo Alonso Garcia

    2009-08-01

    Full Text Available OBJETIVO: Analisar as complicações da aplicação do laser de diodo para o tratamento da obstrução nasolacrimal adquirida. MÉTODOS: Foram realizados 44 procedimentos (dacriocistorrinostomia transcanalicular com laser de diodo com intubação bicanalicular de silicone sob anestesia local entre fevereiro de 2002 a novembro de 2007 em 41 pacientes (3 bilateralmente, sendo 32 mulheres e 9 homens. RESULTADOS: As complicações mais frequentes no intraoperatório foram: dificuldade de passar a sonda de Crawford (13,6% e passagem da fibra óptica dificultada (11,3%. No pós-operatório, a epífora foi a ocorrência mais frequente (15,9%, seguida pela retirada acidental do silastic (11,3%. CONCLUSÃO: Os índices de complicações intra e pós-operatórias se equivalem aos artigos publicados com a mesma técnica cirúrgica (e mesmo tipo de laser.PURPOSE: To evaluate the complications of the use of diode laser in the treatment of acquired nasolacrimal obstruction. METHODS: Forty four procedures (transcanalicular dacryocystorhinostomy with diode laser with bicanalicular silicone tube intubation and local anesthesia where performed from February 2002 to November 2007 in 41 patients (3 bilaterally, 32 women and 9 men. RESULTS: The most common intraoperative complications were disability to pass the Crawford probe (13.6% and the laser probe (11.3%. Regarding postoperative complications, epiphora was the event of higher frequency (15.9% followed by the non-intentional silastic extrusion by the patient (11.3%. CONCLUSION: Intraoperative and postoperative complications rate were similar of others articles that demonstrated the same surgical technique (with same laser.

  3. Interaction of low-intensity linearly polarized laser radiation with living tissues: effects on tissular acceleration of skin wound healing; Interacao da radiacao laser linearmente polarizada de baixa intensidade com tecidos vivos: efeitos na acelaracao de cicatrizacao tissular em lesoes de pele

    Energy Technology Data Exchange (ETDEWEB)

    Ribeiro, Martha Simoes

    2000-07-01

    According to the Maxwell's equations to optical properties of surfaces, the energy deposition efficiency in a microroughness interface depends on the electrical field polarization component. Considering a linearly polarized beam, this efficiency will depend on the roughness parameters to p-polarized light and it will not depend on such parameters to s-polarized light. In this work it was investigated the effects of low-intensity, linearly polarized He-Ne laser beam on skin wounds healing, considering two orthogonal directions of polarization. We have considered a preferential axis as the animals' spinal column and we aligned the linear laser polarization first parallel, then perpendicular to this direction. Burns about 6 mm in diameter were created with liquid N{sub 2} on the back of the animals and the lesions were irradiated on days 3, 7, 10 and 14 post-wounding, D= 1,0 J/cm{sup 2}. Control lesions were not irradiated. The theoretical model consisted in describing linearly polarized light propagation in biological tissues using transport theory. The degree of polarization was measured in normal and pathological skin samples. It was verified that linearly polarized light can survive in the superficial layers of skin and it can be more preserved in skin under pathological condition when compared with health skin. The analysis of skin wound healing process has demonstrated that the relative direction of the laser polarization plays an important role on the wound healing process by light microscopy, transmission electron microscopy and radioautography. (author)

  4. Dermatological laser treatment

    International Nuclear Information System (INIS)

    Moerk, N.J.; Austad, J.; Helland, S.; Thune, P.; Volden, G.; Falk, E.

    1991-01-01

    The article reviews the different lasers used in dermatology. Special emphasis is placed on the treatment of naevus flammeus (''portwine stain'') where lasers are the treatment of choice. Argon laser and pulsed dye laser are the main lasers used in vascular skin diseases, and the article focuses on these two types. Copper-vapour laser, neodymium-YAG laser and CO 2 laser are also presented. Information is provided about the availability of laser technology in the different health regions in Norway. 5 refs., 2 figs

  5. Effects of the copper vapour laser radiation in the root canal wall dentine: in vitro experiment using scanning electron microscopy and stereoscopy; Efeitos da radiacao laser de vapor de cobre na parede de dentina de canais radiculares: estudo in vitro por meio de microscopia eletronica de varredura e microscopio estereoscopico

    Energy Technology Data Exchange (ETDEWEB)

    Silveira, Maria Claudia Garcia da

    2001-07-01

    Ten human uniradicular teeth had their crown removed along the cement-enamel junction and right away a proper chemical-surgical preparation of the radicular canals was done; the roots were longitudinally sectioned in order to allow the irradiation of the surfaces of the root canals wall dentine. The hemi-roots were separated in two groups: group I (control), with four hemi-roots, not irradiated; and group II, with 16 hemi-roots, subdivided in four sub-groups submitted to the following exposition time: 0,02 s; 0,05 s; 0,1 s and 0,5 s. A copper vapour laser was used with a 510,6 nm wavelength, total average power of 11 W in green and yellow emissions; average power of 6,5 W in green emission; pulse repetition rate of 16.000 Hz and pulse duration of 30 ns. The pulse energy (green line) is 0,4 mJ and the peak power 13,5 W. The laser cavity is unstable type (R{sub 1}=3.900 mm and R{sub 2}-250 mm). The focusing have focal length lens f{sub 1}=250 mm and f{sub 2}=150 mm. The beam quality is of the M{sup 2}=5. The results obtained by scanning electron microscopy analysis showed the appearance of a cavity in the region of the laser beam incidence in the edges of this cavity, dentin was melt and resolidified presenting also cracks due to heat diffusion. Based on these results, we concluded that the size of the cavity formed in the dentin is directly proportional to the rate of exposure and, the more laser emission in the same area, more damage in the root canals wall dentin occurs. More studies need to be done with different exposition's time in order to obtain a safety protocol that does not cause injury in dental and support tissue. (author)

  6. CO2-laser fusion

    International Nuclear Information System (INIS)

    Stark, E.E. Jr.

    1978-01-01

    The basic concept of laser fusion is described, with a set of requirements on the laser system. Systems and applications concepts are presented and discussed. The CO 2 laser's characteristics and advantages for laser fusion are described. Finally, technological issues in the development of CO 2 laser systems for fusion applications are discussed

  7. Project LASER

    Science.gov (United States)

    1990-01-01

    NASA formally launched Project LASER (Learning About Science, Engineering and Research) in March 1990, a program designed to help teachers improve science and mathematics education and to provide 'hands on' experiences. It featured the first LASER Mobile Teacher Resource Center (MTRC), is designed to reach educators all over the nation. NASA hopes to operate several MTRCs with funds provided by private industry. The mobile unit is a 22-ton tractor-trailer stocked with NASA educational publications and outfitted with six work stations. Each work station, which can accommodate two teachers at a time, has a computer providing access to NASA Spacelink. Each also has video recorders and photocopy/photographic equipment for the teacher's use. MTRC is only one of the five major elements within LASER. The others are: a Space Technology Course, to promote integration of space science studies with traditional courses; the Volunteer Databank, in which NASA employees are encouraged to volunteer as tutors, instructors, etc; Mobile Discovery Laboratories that will carry simple laboratory equipment and computers to provide hands-on activities for students and demonstrations of classroom activities for teachers; and the Public Library Science Program which will present library based science and math programs.

  8. Tópicos da teoria da relatividade

    OpenAIRE

    Fragata, Paulo Renato Ferreira

    2013-01-01

    Dissertação de Mestrado, Matemática para Professores, 25 de Outubro 2013, Universidade dos Açores. Qualquer descrição física da natureza tem por base a especificação da posição e do instante em que decorre determinado acontecimento. Para tal, é necessário recorrer a um sistema de coordenadas, escolhido por cada observador, do modo que ele achar mais pertinente. Dada a generalidade na escolha do sistema de coordenadas, é útil conhecer as regras que nos permitem comparar cálculos feitos em d...

  9. Laser and caries diagnosis: the state of the art and evaluation in vitro of the differences of the fluorescence between sound, carious and demineralized enamel; Laser e diagnostico de caries: estado da arte e avaliacao in vitro das diferencas de fluorescencia entre esmalte sadio, cariado e desmineralizado

    Energy Technology Data Exchange (ETDEWEB)

    Mendonca, Maria Angelica Lopes Chaves

    2001-07-01

    The aim of this study was to evaluate the methods for establishing dental caries diagnosis that make use of Laser light as source of illumination, establishing the 'state of the art'. Experimental observation of the differences among fluorescence of sound, demineralized and carious enamel by visible luminescent spectroscopy was also done. Six human teeth, extracted for clinical reasons were studied, and the results showed that the spectrum of carious enamel is different from the sound and demineralized ones. The differences are more evident relative to sond enamel and carious enamel, the same occurring between demineralized and carious enamel. The review of the literature aimed to make comparative considerations between QLF, LF and DELF; their effectiveness relative to traditional methods such as visual, visual with probe, radiography. It was verified that DELF was more sensitive, but could not discriminate between different degrees of mineral loss. QLF, compared to DIAGNOdent has the same sensitivity, but it is better for scientific purposes. The experimental part of the present study used on argon ion Laser to illuminated the teeth and signs of emission of fluorescence were captured by a PMT and then analyzed by a computer system with EG and G software. The results showed that the spectrum of carious enamel is different from the sound and demineralized. The differences are more evident in relation to sound and carious enamel, the same occurs between demineralized and carious enamel. (author)

  10. Laser and caries diagnosis: the state of the art and evaluation in vitro of the differences of the fluorescence between sound, carious and demineralized enamel; Laser e diagnostico de caries: estado da arte e avaliacao in vitro das diferencas de fluorescencia entre esmalte sadio, cariado e desmineralizado

    Energy Technology Data Exchange (ETDEWEB)

    Mendonca, Maria Angelica Lopes Chaves

    2001-07-01

    The aim of this study was to evaluate the methods for establishing dental caries diagnosis that make use of Laser light as source of illumination, establishing the 'state of the art'. Experimental observation of the differences among fluorescence of sound, demineralized and carious enamel by visible luminescent spectroscopy was also done. Six human teeth, extracted for clinical reasons were studied, and the results showed that the spectrum of carious enamel is different from the sound and demineralized ones. The differences are more evident relative to sond enamel and carious enamel, the same occurring between demineralized and carious enamel. The review of the literature aimed to make comparative considerations between QLF, LF and DELF; their effectiveness relative to traditional methods such as visual, visual with probe, radiography. It was verified that DELF was more sensitive, but could not discriminate between different degrees of mineral loss. QLF, compared to DIAGNOdent has the same sensitivity, but it is better for scientific purposes. The experimental part of the present study used on argon ion Laser to illuminated the teeth and signs of emission of fluorescence were captured by a PMT and then analyzed by a computer system with EG and G software. The results showed that the spectrum of carious enamel is different from the sound and demineralized. The differences are more evident in relation to sound and carious enamel, the same occurs between demineralized and carious enamel. (author)

  11. Laser Research Lab

    Data.gov (United States)

    Federal Laboratory Consortium — The Laser Research lab is thecenter for the development of new laser sources, nonlinear optical materials, frequency conversion processes and laser-based sensors for...

  12. Laser therapy (image)

    Science.gov (United States)

    A laser is used for many medical purposes. Because the laser beam is so small and precise, it enables ... without injuring surrounding tissue. Some uses of the laser are retinal surgery, excision of lesions, and cauterization ...

  13. Laser fusion: an overview

    International Nuclear Information System (INIS)

    Boyer, K.

    1975-01-01

    The laser fusion concept is described along with developments in neodymium and carbon dioxide lasers. Fuel design and fabrication are reviewed. Some spin-offs of the laser fusion program are discussed. (U.S.)

  14. Laser power supply

    International Nuclear Information System (INIS)

    Bernstein, D.

    1975-01-01

    The laser power supply includes a regulator which has a high voltage control loop based on a linear approximation of a laser tube negative resistance characteristic. The regulator has independent control loops for laser current and power supply high voltage

  15. Comparative study of smear layer removal by different etching modalities and Er:YAG laser irradiation on the root surface: a scanning electron microscopy study; Estudo comparativo, atraves de microscopia eletronica de varredura, da acao de diferentes substancias quimicas e do laser de Er:YAG, na remocao de smear layer, em superficies radiculares submetidas a raspagem e aplainamento

    Energy Technology Data Exchange (ETDEWEB)

    Theodoro, Leticia Helena

    2001-07-01

    The aim of this study was to compare the effects of citric acid, EDTA, citric acid with tetracycline, and Er:YAG laser to smear layer removal on the root surface after scaling with manual instruments by SEM. Thirty specimens (n=30) of root surface before scaling were divided into 6 groups (n=5). The Control Group (G1) was not treated; Group 2 (G2) was conditioned with citric acid gel 24%, pH1, during 2 minutes; Group 3 (G3) was conditioned with EDTA gel 24%, pH 7, during 2 minutes; Group 4 (G4) was conditioned with citric acid and tetracycline gel 50%, pH1 during 2 minutes; Group 5 (G5) was irradiated with Er:YAG laser (2.94 {mu}m), 47 mJ/10 Hz, focused, under water spray during 15 seconds and fluence of 0.58 J/cm{sup 2}; Group 6 (G6) was irradiated with Er:YAG laser (2.94{mu}m), 83 mJ/10 Hz, focused, under water spray during 15 seconds and fluence of 1.03 J/cm{sup 2}. The micrographic were analyzed by scores and following the statistical analysis with Kruskal Wallis (p<0.05) H=20,31. The G1 was significantly different of all groups (28.0); the G2 (13.4), G3 (11.7), and G4 (13.6) showed no difference in relation to G5 (20.3) and G6 (6.0), but the G6 was significantly different from G5. From the results, it can be conclude that: 1) there was intensity smear layer after scaling and root planing; 2) all treatments were effective to smear layer remove with significantly difference to G2, G3, G4, G5 and G6; G2, G3 and G4 were not statistically different from G5 and G6; 3) G6 was more effective in the smear layer remotion in relation to G5 and both presented irregular root surface. (author)

  16. Bleaching Dengan Teknologi Laser

    OpenAIRE

    Eliwaty

    2008-01-01

    Penulisan tentang bleaching dengan laser dimaksudkan untuk menambah wawasan serta pengetahuan dari pembaca di bidang kedokteran gigi. Macam-macam laser yang dipergunakan dalam bleaching yaitu argon, CO2 serta dioda laser. Contoh merek produk laser yaitu Blulaze, Dentcure untuk argonlaser, Novapulse untuk C02 serta Opus 5 untuk dioda laser. Laser bleaching hasilnya dapat dicapai dalam satu kunjungan saja, cepat, efisien namun biayanya relatif mahal, dapat menimbulkan burn, sensitivitas se...

  17. Laser safety at high profile laser facilities

    International Nuclear Information System (INIS)

    Barat, K.

    2010-01-01

    Complete text of publication follows. Laser safety has been an active concern of laser users since the invention of the laser. Formal standards were developed in the early 1970's and still continue to be developed and refined. The goal of these standards is to give users guidance on the use of laser and consistent safety guidance and requirements for laser manufacturers. Laser safety in the typical research setting (government laboratory or university) is the greatest challenge to the laser user and laser safety officer. This is due to two factors. First, the very nature of research can put the user at risk; consider active manipulation of laser optics and beam paths, and user work with energized systems. Second, a laser safety culture that seems to accept laser injuries as part of the graduate student educational process. The fact is, laser safety at research settings, laboratories and universities still has long way to go. Major laser facilities have taken a more rigid and serious view of laser safety, its controls and procedures. Part of the rationale for this is that these facilities draw users from all around the world presenting the facility with a work force of users coming from a wide mix of laser safety cultures. Another factor is funding sources do not like bad publicity which can come from laser accidents and a poor safety record. The fact is that injuries, equipment damage and lost staff time slow down progress. Hence high profile/large laser projects need to adapt a higher safety regimen both from an engineering and administrative point of view. This presentation will discuss all these points and present examples. Acknowledgement. This work has been supported by the University of California, Director, Office of Science.

  18. Semiconductor Laser Measurements Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The Semiconductor Laser Measurements Laboratory is equipped to investigate and characterize the lasing properties of semiconductor diode lasers. Lasing features such...

  19. Laser Protection TIL

    Data.gov (United States)

    Federal Laboratory Consortium — The Laser Protection TIL conducts research and analysis of laser protection materials along with integration schemes. The lab's objectives are to limit energy coming...

  20. MACIEZ DA CARNE BOVINA

    Directory of Open Access Journals (Sweden)

    Antonio Bento Mancio

    2006-10-01

    Full Text Available Dentre as características de qualidade da carne bovina, a maciez assume posição de destaque, sendo considerada a característica organoléptica de maior influência na aceitação da carne por parte dos consumidores. A dureza da carne pode ser dividida em dureza residual, causada pelo tecido conjuntivo e outras proteínas do estroma, e dureza de actomiosina, causada pelas proteínas miofibrilares. Dentre os fatores que influenciam a maciez da carne, podem ser destacados a genética, a raça, a idade ao abate, o sexo, a alimentação, o uso de agentes hormonais (?-adrenérgicos e os tratamentos post-mortem. A qualidade final da carne é resultante de tudo o que aconteceu com o animal durante toda a cadeia produtiva. Devem-se assegurar procedimentos adequados de transporte, armazenamento, manipulação, exposição e preparo da carne, a fim de se obter um produto de melhor qualidade. PALAVRAS-CHAVE: Calpaínas, calpastatina, qualidade da carne, rigor mortis, tecido muscular.

  1. Laser Photochemistry.

    Science.gov (United States)

    1981-07-01

    inverted by the first, i.e., at the moment of time t = T, such that i = (2n+)lT, where 0 is the Rabi frequency (Oraevski et al., 1976). . classical... anisotropic molecule present. CW HeNe, Ar+ and Kr+ lasers are used, and the filter method is necessary because of time-scales lo8 - 10ll Hz. Some general...e.g., truncated harmonic oscillator, square well, spherically symmetric Morse or Lennard-Jones, anisotropic (angle-dependent) Morse or Lennard-Jones

  2. GERONTOLOGIA: ESTADO DA ARTE

    Directory of Open Access Journals (Sweden)

    Vera M.A.Tordino Brandão

    2010-02-01

    Full Text Available O Programa de Gerontologia da PUC desenvolve pesquisas focando o ser na perspectiva do envelhecimento. As atividades são interdisciplinares e reúnem docentes, alunos e ex-alunos. Nesta mesa redonda apresentamos um panorama sobre estes estudos. Na área da educação e comunicação o foco está centrado na longevidade e na preparação e representação social da velhice. São ressaltadas como temáticas: a formação continuada de profissionais e pesquisadores; o significado da religiosidade/espiritualidade ao longo da trajetória, e sua repercussão na qualidade de vida do idoso; os programas sócio-educacionais para idosos e concepções sobre educação; o monitoramento da mídia na cobertura da crescente longevidade e seus impactos. Em identidade e modos de morar reflete-se sobre soluções planejadas e sua adequação para a inclusão do envelhecimento populacional como questão fundamental, que implica a elaboração de novas políticas, investigações e, especialmente, apresenta-se como questão a ser analisada, refletida e vivenciada pela sociedade em geral. Quanto à saúde, o Programa desenvolve várias pesquisas numa abordagem interdisciplinar tendo como objetos de estudo: a terapia assistida com animais direcionada a idosos com diagnóstico de Alzheimer; o acompanhamento terapêutico e o atendimento psicoterapêutico em grupo, a aplicação da técnica de Calatonia em idosos moradores de ILPI, além da investigação sobre impasses clínicos no idoso frágil. Palavras-chave: gerontologia, longevidade, envelhecimento

  3. Conjecturas da Epistemológia Jurídica e Aspectos da Teoria da Linguagem

    OpenAIRE

    Oliveira, Rita de Cássia Cartelli de; Cesumar; Motta, Ivan Dias; Cesumar

    2008-01-01

    Apresentar-se-ão reflexões em torno da epistemologia jurídica e alguns aspectos da teoria da linguagem; a necessidade de acompanhamento e aprimoramento da linguagem jurídica, para que o direito não se distancie da realidade, mantendo-se apenas como um sistema do status quo; uma breve análise de algumas teorias da ciência do direito e da linguagem; as especificidades dos termos lingüísticos para a análise da ciência do direito, pautada na contemporaneidade sob a perspectiva humanista, buscando...

  4. CONDICIONANTES DA COMPETITIVIDADE EMPRESARIAL

    Directory of Open Access Journals (Sweden)

    José Luiz Contador

    2010-03-01

    Full Text Available Este trabalho examina teoricamente os fatores determinantes da competitividade do produto e do negócio, imprescindíveis à elaboração de estratégias competitivas que visam à obtenção e sustentação de vantagens competitivas. Esse tema é objeto tanto da área de marketing estratégico quanto da de estratégia empresarial. Nas duas áreas, há um ponto de consenso que afirma que a empresa deve diferenciar sua oferta para conquistar e manter vantagem competitiva. Mas, os estudos conduzidos por meio do modelo de Campos e Armas da Competição revelaram que a empresa pode diferenciar seu produto e/ou serviço de modo mais amplo, levando em consideração, na formulação da sua estratégia competitiva, também o campo da competição, quer do produto, quer dela própria. Assim, o objetivo deste artigo é evidenciar que, para a empresa ser competitiva, além de diferenciar seu produto e/ou seu serviço no sentido tradicional, ela precisa: 1 diferenciar seu produto incluindo a definição em quais campos vai competir em cada segmento; e 2 escolher as armas da competição que irá utilizar e definir a intensidade de cada arma. Para atingir tal objetivo, foram necessários vários conceitos do modelo de Campos e Armas da Competição: campo da competição, arma da competição, tese do modelo, configuração dos campos da competição, campo coadjuvante, produto coadjuvante e par produto-mercado. Como uma proposta inovadora sempre desperta dúvida, é mostrado o processo de validação do modelo de Campos e Armas da Competição e são discutidas sua universalidade, consistência e completude.

  5. Laser Propulsion - Quo Vadis

    International Nuclear Information System (INIS)

    Bohn, Willy L.

    2008-01-01

    First, an introductory overview of the different types of laser propulsion techniques will be given and illustrated by some historical examples. Second, laser devices available for basic experiments will be reviewed ranging from low power lasers sources to inertial confinement laser facilities. Subsequently, a status of work will show the impasse in which the laser propulsion community is currently engaged. Revisiting the basic relations leads to new avenues in ablative and direct laser propulsion for ground based and space based applications. Hereby, special attention will be devoted to the impact of emerging ultra-short pulse lasers on the coupling coefficient and specific impulse. In particular, laser sources and laser propulsion techniques will be tested in microgravity environment. A novel approach to debris removal will be discussed with respect to the Satellite Laser Ranging (SRL) facilities. Finally, some non technical issues will be raised aimed at the future prospects of laser propulsion in the international community

  6. Efeito da eutonia no tratamento da fibromialgia

    OpenAIRE

    Maeda,Cecília; Martinez,José Eduardo; Neder,Matilde

    2006-01-01

    OBJETIVO: avaliar a eutonia como método terapêutico auxiliar no tratamento da fibromialgia (FM). MÉTODOS: estudou-se um grupo de 20 mulheres, segundo os critérios do American College of Rheumatology (ACR), com duração mínima de seis meses, sem alterações no tratamento medicamentoso ou prescrição de exercícios nesse período. As pacientes foram avaliadas através do questionário de dados sociodemográficos; Escala Visual Analógica (EVA) para dor e questionário genérico de avaliação da qualidade d...

  7. Het Italiaanse voorzetsel da

    NARCIS (Netherlands)

    Boer, M.G. de

    2010-01-01

    SAMENVATTING In een voorzetselstudie in het kader van Jackendoffs semantische theorie wordt het sterk polyseme Italiaanse voorzetsel da geanalyseerd als een verzameling deelbetekenissen waarbij de meeste door een of meer semantische regels afgeleid kunnen worden van de basisbetekenis ruimtelijke

  8. ESPECTROS INFRAVERMELHOS DA CREATINA

    Directory of Open Access Journals (Sweden)

    Kumiko K. Sakane

    2011-08-01

    Full Text Available São apresentados espectros infravermelhos da creatina, na faixa de 4000 a 400 cm−1. Os resultados são comparados com espectros observados e calculados, publicados na literatura.

  9. Significados Ocultos da Enfermagem

    Directory of Open Access Journals (Sweden)

    Wiliam César alves Machado

    2011-04-01

    Full Text Available Sabe-se que as ações de cuidar em enfermagem foram sendo moldadas através da história da humanidade e deram-se, majoritariamente, na esfera do subjetivo que permeia as interações existenciais do ser humano que cuida e daquele que recebe cuidados. Campo fecundo para intercâmbios eletromagnéticos. Suas origens remontam ao cuidado prestado por mães, pais, avós, irmãos e demais familiares incumbidos da responsabilidade de ajudar entes recém-natos, crianças, doentes e idosos em suas necessidades de cuidados para preservação da vida.

  10. Evaluation of microleakage occurred in class V restoration prepared with Er:YAG laser and also with high speed, restored using composite; Avaliacao da microinfiltracao em cavidades classe V preparada com laser de Er:YAG ou alta rotacao, jateadas ou nao com bicarbonato de sodio e restauradas com resina composta

    Energy Technology Data Exchange (ETDEWEB)

    Junqueira, Angelo Maercio Finochio

    2002-07-01

    The microleakage is one of the great problems found in restoring dentistry. In spite of adhesive system evolution, several materials have been studied intending to minimize or to eliminate the microleakage occurred between the tooth and restorative material. The objective of this in vitro study was to evaluate and compare the marginal microleakage in class V cavities prepared by Er:YAG laser or high speed and restored with composite resin. One of the groups received the sodium bicarbonate jet while the other group have not received. Twenty teeth third extracted molars were sectioned in the sense medial-distal being obtained forty samples that were divided in four groups: Group I (G1): prepared with Er:YAG laser (2940 nm), E= 350 mJ/p, F=2 Hz, fluency of 112,5 J/cm{sup 2}. Preparing occlusion margin slice with 250 mJ/p, F=2 Hz, fluency of 80,3 J/cm{sup 2}. The prepared total area was irradiated with E=80 mJ/p, F=2 Hz and fluency of 25,75 J/cm{sup 2}. Every prepared area was finally submitted to sodium bicarbonate jet. Group 2 (G2): it was employed the same parameters used on group 1, except the sodium carbonate jet application. Group 3 (G3): the cavities' prepare were executed with high speed rotation using diamond cylindrical point. The slice confection has been made with the same point with 45 degrees inclined, utilizing also the sodium carbonate jet in all prepared area. Group 4 (G4): it was executed similarly prepared to group 3, without the sodium bicarbonate jet. In all the groups the cavities were washed with water spray and drought with air jet. Dentin and enamel surfaces have been conditioned with phosphoric acid at 35%. All the samples of all groups were restored using the single bond system adhesive and composite resin Z250, kept at 37 deg C in stove during 24 hours, thermally stressed, immersed in silver nitrate solution at 50% for 24 hours while kept in darkness. The specimens were soaked in photo developing solution and exposed to fluorescent light for

  11. Evaluation of microleakage occurred in class V restoration prepared with Er:YAG laser and also with high speed, restored using composite; Avaliacao da microinfiltracao em cavidades classe V preparada com laser de Er:YAG ou alta rotacao, jateadas ou nao com bicarbonato de sodio e restauradas com resina composta

    Energy Technology Data Exchange (ETDEWEB)

    Junqueira, Angelo Maercio Finochio

    2002-07-01

    The microleakage is one of the great problems found in restoring dentistry. In spite of adhesive system evolution, several materials have been studied intending to minimize or to eliminate the microleakage occurred between the tooth and restorative material. The objective of this in vitro study was to evaluate and compare the marginal microleakage in class V cavities prepared by Er:YAG laser or high speed and restored with composite resin. One of the groups received the sodium bicarbonate jet while the other group have not received. Twenty teeth third extracted molars were sectioned in the sense medial-distal being obtained forty samples that were divided in four groups: Group I (G1): prepared with Er:YAG laser (2940 nm), E= 350 mJ/p, F=2 Hz, fluency of 112,5 J/cm{sup 2}. Preparing occlusion margin slice with 250 mJ/p, F=2 Hz, fluency of 80,3 J/cm{sup 2}. The prepared total area was irradiated with E=80 mJ/p, F=2 Hz and fluency of 25,75 J/cm{sup 2}. Every prepared area was finally submitted to sodium bicarbonate jet. Group 2 (G2): it was employed the same parameters used on group 1, except the sodium carbonate jet application. Group 3 (G3): the cavities' prepare were executed with high speed rotation using diamond cylindrical point. The slice confection has been made with the same point with 45 degrees inclined, utilizing also the sodium carbonate jet in all prepared area. Group 4 (G4): it was executed similarly prepared to group 3, without the sodium bicarbonate jet. In all the groups the cavities were washed with water spray and drought with air jet. Dentin and enamel surfaces have been conditioned with phosphoric acid at 35%. All the samples of all groups were restored using the single bond system adhesive and composite resin Z250, kept at 37 deg C in stove during 24 hours, thermally stressed, immersed in silver nitrate solution at 50% for 24 hours while kept in darkness. The specimens were soaked in photo developing solution and exposed to fluorescent

  12. ORIGEM DA ANGTIA MODERNA

    Directory of Open Access Journals (Sweden)

    Edvino Rabuske

    1971-01-01

    Full Text Available O tema que me foi proposto "origem da angtia moderna". Por certo, um tema extremamente complexo. Trata-se de surpreender as modalidades modernas de um fenomeno, antigo como o prrio homem. Visando contribuir numa semana de reflexo sobre a esperan crist em, que esta abordada a partir, de diversos gulos, parece indicado que esta exposio n se atenha a um ico aspeto da angtia.

  13. Study of cross-linking reactions induced by gamma rays in hybrid membranes of Bisphenol-A-Polysulfone and precipitated silica; Estudo da formacao de ligacoes cruzadas por irradiacao gama em membranas hibridas de Polissulfona Bisfenol-A e silica precipitada

    Energy Technology Data Exchange (ETDEWEB)

    Furtado Filho, Acacio Antonio M., E-mail: facacio@ctex.eb.br [Laboratorio de Quimica Militar, CTEx, Rio de Janeiro, RJ (Brazil); Gomes, Ailton de S.; Lopes, Lea; Benzi, Marcia R. [Instituto de Macromoleculas Professora Eloisa Mano, UFRJ, Rio de Janeiro, RJ (Brazil)

    2011-07-01

    In this work the bisphenol-A-polysulfone (PSF) was sulfonated using trimethyl silyl chlorosulfonate [(CH{sub 3}){sub 3}SiSO{sub 3}Cl] as a mild sulfonating agent in a homogeneous solution of dichloroethane. The sulfonation reaction was confirmed by acid-base titration and FTIR-spectroscopy analysis. The hybrid membranes were obtained by casting the sulfonated bisphenol-A-polysulfone (SPSF) and precipitated silica Tixosil{sup R} 333 solutions in N-N-dimethylacetamide. Cross-linking in the hybrid membranes was obtained by irradiation, with doses ranging from 5 to 30 kGy using gamma ray from a {sup 60}Co source. The water uptake and the swelling of the membranes were estimated by measuring the change in weight between dry and wet conditions. The conductivity of the membranes in acid form was measured with the ac impedance technique using a PGSTAT30 frequency response analyzer. The hybrid cross-linked membranes have conductivity close to 10-1 S.cm{sup -1} at 100% RH and 80 deg C. Electrochemical performances, thermo-mechanical stability and low cost make this cross-linked SPSF hybrid membrane an attractive material for fuel cells using a proton exchange membrane. (author)

  14. Alternative method of portable irradiation of manganese sulphate solution by an plutonium-beryllium source for manganese sulphate bath efficiency measurements; Metodo alternativo de irradiacao portatil da solucao de sulfato de manganes por uma fonte de plutonio-berilio para medicoes de eficiencia do banho de sulfato de manganes

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Fellipe Souza da; Martins, Marcelo Marques; Pereira, Walsan Wagner, E-mail: fellipess@ird.gov.br [Instituto de Radioprotecao e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil)

    2016-07-01

    This study intends to create an alternative irradiation system from a Plutonium-Beryllium source for manganese sulphate solution using the Monte Carlo code. Thus seeking to eliminate the issue of institutes that do not have reactors or particle accelerators in its infrastructure, in order to optimize and provide independence for them to carry out efficiency measurements of MnSO{sub 4} solution in their own locality. The Monte Carlo simulations defined the technical features of this new system so that the solution reaches the maximum neutron capture by manganese in solution. (author)

  15. Removal of toxicity the pharmaceutical propranolol and your mixture with fluoxetine hydrochloride in aqueous solution using radiation with electron beam; Remocao da toxicidade do farmaco propranolol e de sua mistura com cloridrato de fluoxetina em solucao aquosa empregando irradiacao com feixe de eletrons

    Energy Technology Data Exchange (ETDEWEB)

    Boiani, Nathalia Fonseca

    2016-07-01

    Environmental health has been damage due to incorrect disposal of products and by-products. Among emerging pollutants it is possible to account with several pharmaceuticals, causing those problems when disposed in the environment by effluents. Conventional processing techniques are insufficient in removal of the pharmaceuticals, for having resistant waste and low biodegradability. Thus the advanced oxidation processes have been studied as an alternative for the treatment of different types of effluents. The objective of this study was to apply the process of irradiation with electron beam in order to reduce the toxic effects of propranolol, and the mixture with fluoxetine hydrochloride in aqueous solution. Ecotoxicological tests conducted with propranolol, and the mixture with fluoxetine hydrochloride, for Daphnia similis microcrustacean, and the Vibrio fischeri bacterium. It was observed that D. similis was more sensitive to propranolol drug and to the mixture, when compared to bacterium V.fischeri. After being subjected to the treatment with ionizing radiation, all applied doses to the propranolol and the mixture, showed significant reduction of toxicity, for D. similis. Different were the results for V. fischeri, when only 5.0 kGy reduced toxicity to propranolol. The mixture of pharmaceuticals required 2.5 and 5.0 kGy for reducing toxicity. 5.0 kGy showed the best removal efficiency for toxicity: 79.94 % for D. similis and 15.64 % for V. fischeri, when exposed to propranolol. The mixture reduction efficacy were 81.59% and 26.93 % for D.similis and V.fischeri, respectively. (author)

  16. Identification, quantification and comparison between the chemical substances responsible for the irradiated pot still cachaca and commercial rum aromas; Identificacao, quantificacao e comparacao das substancias quimicas responsaveis pelos aromas da cachaca de alambique e do rum comercial tratados pelo processo de irradiacao

    Energy Technology Data Exchange (ETDEWEB)

    Souza, Maria Djiliah Camargo Alvarenga de

    2006-07-01

    The irradiation process has being presented as an alternative technique in food preservation. When applied on beverages, radiation is mainly used for malt decontamination or sterilization of musts and had been proposed also to accelerate aging. Some confusion over rum and cachaca identities has arisen due to the internationalization of cachaca. This research aims to identify, quantify and compare the effect of gamma radiation on the aroma of the Brazilian spirit with rum, irradiated and non irradiated, by instrumental and sensory analysis. Results showed that the content of volatile compounds presented strong correlation with the radiation dose (0,150 and 300 Gy) for all the samples. According to Triangle Test for aroma, all the judges could distinguish among non irradiated and irradiated samples (300 Gy), aged cachaca from rum and non aged cachaca from rum, but they could not distinguish aged cachaca from non aged cachaca. Analysis of variance (ANOVA) of the results from the quantitative descriptive analysis showed that non irradiated non aged cachaca and rum were different in their alcohol, vinegar, vanilla, citrus, melon, spice, vegetal and grass except caramel and apple aroma attributes. Non irradiated cachaca and irradiated cachaca (300 Gy); and non irradiated rum and irradiated rum (300 Gy) were different in their apple, caramel, vinegar, vanilla, citrus, melon, spice, vegetal and grass except alcohol aroma attributes. According to the gas chromatography/olfactometry results, significant difference was found among non irradiated cachaca and rum; non irradiated cachaca and irradiated cachaca (300 Gy); and non irradiated rum and irradiated rum (300 Gy) when their aromas were compared. (author)

  17. Evaluation of the combined effect of the irradiation process and packaging in different atmospheres on microbiological and sensory quality of beef (Longissimus dorsi) fresh chilled and frozen; Avaliacao do efeito combinado do processo de irradiacao e da embalagem em diferentes atmosferas na qualidade microbiologica e sensorial de carne bovina (Longissimus dorsi) fresca refrigerada e congelada

    Energy Technology Data Exchange (ETDEWEB)

    Moreno, Maria Luz Garcia

    2001-07-01

    Meat, a nutritious food, allows the development of a wide variety of microorganisms which not only spoils it but offers risk to public health. Irradiation with medium doses can be efficiently use to control the presence of microorganisms in meat. Depending upon the dose, irradiation of meat can lead to formation of off-flavours, off odours and discoloration of meat packed with oxygen. These problems can probably be overcome using vacuum package or freezing temperatures. The aim of this research was to evaluate the effect of irradiation, vacuum packaging and temperature on the meat quality. Forty beef pieces (approx. 100g each) were packed under normal atmosphere, 40 were vacuum packed and 40 under N{sub 2} atmosphere. Half of each group was kept overnight under refrigeration and half was frozen. Refrigerated samples were irradiated with 0, 1, 1.5 and 2 kGy. Frozen samples were irradiated with 0, 1, 2 and 3 kGy. Number of microorganisms was significantly reduced (p<0.05) by de process. The temperature effect on the radioresistance of all microorganisms was not observed. Brochothrix thermosphacta was present in numbers of 10{sup 3} CFU/g in control samples and remained the same during all study and was detected only in refrigerated irradiated samples. Lactic acid bacteria were less affected by irradiation. Bacterial spores were found in both control and irradiated samples in low numbers (1-67 spores/g). Salmonella sp. and Staphylococcus sp. were not detected. The best combination of treatments to extend the shelf-life of refrigerated meat was vacuum packaging and an irradiation dose of 2 kGy. Nitrogen did not improve the color of irradiated meat. Refrigerated irradiated aerobically packaged meat was darker and less red than control samples. Frozen irradiated aerobically packaged meat was less red and lightener. The effectiveness of food irradiation is based on good quality of raw product. (author)

  18. Cultivation and irradiation of human fibroblasts in a medium enriched with platelet lysate for obtaining feeder layer in epidermal cell culture; Cultivo e irradiacao de fibroblastos humanos em meio enriquecido com lisado de plaquetas para obtencao de camada de sustentacao em culturas de celulas da epiderme

    Energy Technology Data Exchange (ETDEWEB)

    Yoshito, Daniele

    2011-07-01

    For over 30 years, the use of culture medium, enriched with bovine serum, and murines fibroblasts, with the rate of proliferation controlled by irradiation or by share anticarcinogenic drugs, has been playing successfully its role in assisting in the development of keratinocytes in culture, for clinical purposes. However, currently there is a growing concern about the possibility of transmitting prions and animals viruses to transplanted patients. Taking into account this concern, the present work aims to cultivate human fibroblasts in a medium enriched with human platelets lysate and determine the irradiation dose of these cells, for obtaining feeder layer in epidermal cell culture. For carrying out the proposed objective, platelets lysis has standardized, this lysate was used for human fibroblasts cultivation and the irradiation dose enough to inhibit its duplication was evaluated. Human keratinocytes were cultivated in these feeder layers, in culture medium enriched with the lysate. With these results we conclude that the 10% platelets lysate promoted a better adhesion and proliferation of human fibroblasts and in all dose levels tested (60 to 300 Gy), these had their mitotic activity inactivated by ionizing irradiation, being that the feeder layers obtained with doses from 70 to 150 Gy were those that provided the best development of keratinocytes in medium containing 2.5% of human platelet lysate. Therefore, it was possible to standardize both the cultivation of human fibroblasts as its inactivation for use as feeder layer in culture of keratinocytes, so as to eliminate xenobiotics components. (author)

  19. Irradiation of liquid egg, frozen egg, powdered egg, egg yolk and white of egg: reducing the population of Salmonella enteritidis and sensory aspects and physico-chemical;Irradiacao de ovo liquido, congelado e ovo, gema e clara em po: reducao da populacao de Salmonella enteritidis e aspectos sensoriais e fisico-quimicos

    Energy Technology Data Exchange (ETDEWEB)

    Froehlich, Angela

    2004-07-01

    Eggs and their products have been incriminated in foodborne disease outbreaks due to Salmonella enteritidis contamination. Irradiation is a food preservation technology that could be applied to minimize the problem. The aim of this study was to determine the effect of irradiation in liquid and frozen egg as well as in powdered egg, egg yolk and egg white spiked with Salmonella enteritidis. Spiked samples of liquid egg, egg white and egg yolk were exposed to 0,5; 1,0; 1,5; 2,0; 2,5; 3,0 kGy and spiked samples of frozen and powdered egg were exposed to 0,5; 1,0; 1,5; 2,0; 2,5; 3,0; 3,5 e 4,0 kGy. Raw odour, cooked odour and taste of non inoculated and irradiated samples and non irradiated samples of egg and egg products were analysed by a trained penal. Viscosity and lipid oxidation (malonaldehyde concentration) were also determined. Doses of 2,0; 3,0; 3,5; 3,0 e 3,5 kGy reduced in 5 log the population of S. Enteritidis in liquid and frozen egg, powdered egg yolk, egg white and egg, respectively, with moderate alterations in relation to non irradiated samples detected by the trained penal. Viscosity and lipid oxidation in the powdered products, however, showed more intense alterations. Therefore, irradiation can be considered a feasible process for liquid and frozen egg while when applied to powdered products it should be considered the type of food product to which they will be added due to alterations in viscosity. (author)

  20. Laser safety and practice

    International Nuclear Information System (INIS)

    Low, K.S.

    1995-01-01

    Lasers are finding increasing routine applications in many areas of science, medicine and industry. Though laser radiation is non-ionizing in nature, the usage of high power lasers requires specific safety procedures. This paper briefly outlines the properties of laser beams and various safety procedures necessary in their handling and usage. (author)

  1. Diode lasers and arrays

    International Nuclear Information System (INIS)

    Streifer, W.

    1988-01-01

    This paper discusses the principles of operation of III-V semiconductor diode lasers, the use of distributed feedback, and high power laser arrays. The semiconductor laser is a robust, miniature, versatile device, which directly converts electricity to light with very high efficiency. Applications to pumping solid-state lasers and to fiber optic and point-to-point communications are reviewed

  2. Laser cladding with powder

    NARCIS (Netherlands)

    Schneider, M.F.; Schneider, Marcel Fredrik

    1998-01-01

    This thesis is directed to laser cladding with powder and a CO2 laser as heat source. The laser beam intensity profile turned out to be an important pa6 Summary rameter in laser cladding. A numerical model was developed that allows the prediction of the surface temperature distribution that is

  3. Semiconductor laser shearing interferometer

    International Nuclear Information System (INIS)

    Ming Hai; Li Ming; Chen Nong; Xie Jiaping

    1988-03-01

    The application of semiconductor laser on grating shearing interferometry is studied experimentally in the present paper. The method measuring the coherence of semiconductor laser beam by ion etching double frequency grating is proposed. The experimental result of lens aberration with semiconductor laser shearing interferometer is given. Talbot shearing interferometry of semiconductor laser is also described. (author). 2 refs, 9 figs

  4. Visible Solid State Lasers

    NARCIS (Netherlands)

    Hikmet, R.A.M.

    2007-01-01

    Diode lasers can be found in various applications most notably in optical communication and optical storage. Visible lasers were until recently were all based on IR diode lasers. Using GaN, directly blue and violet emitting lasers have also been introduced to the market mainly in the area of optical

  5. Laser Microdissection.

    Science.gov (United States)

    Frost, Andra R; Eltoum, Isam-Eldin; Siegal, Gene P; Emmert-Buck, Michael R; Tangrea, Michael A

    2015-10-01

    Laser microdissection (LM) offers a relatively rapid and precise method of isolating and removing specified cells from complex tissues for subsequent analysis of their RNA, DNA, protein or metabolite content, thereby allowing assessment of the role of different cell types in the normal physiological or disease processes being studied. In this unit, protocols for the preparation of mammalian frozen tissues, fixed tissues, and cytologic specimens for LM, including tissue freezing, tissue processing and paraffin embedding, histologic sectioning, cell processing, hematoxylin and eosin staining, immunohistochemistry, and image-guided cell targeting are presented. Also provided are recipes for generating lysis buffers for the recovery of nucleic acids and proteins. The Commentary section addresses the types of specimens that can be utilized for LM and approaches to staining of specimens for cell visualization. Emphasis is placed on the preparation of tissue or cytologic specimens as this is critical to effective LM. Copyright © 2015 John Wiley & Sons, Inc.

  6. Laser EXAFS

    International Nuclear Information System (INIS)

    Mallozzi, P.J.; Epstein, H.M.; Schwenzel, R.E.; Campbell, B.E.

    1983-01-01

    Apparatus for obtaining EXAFS data of a material, comprising means for directing radiant energy from a laser onto a target in such manner as to produce X-rays at the target of a selected spectrum and intensity, suitable for obtaining the EXAFS spectrum of the material, means for directing X-rays from the target onto spectral dispersive means so located as to direct the spectrally resolved X-rays therefrom onto recording means, and means for positioning a sample of material in the optical path of the X-rays, the recording means providing a reference spectrum of X-rays not affected by the sample and absorption spectrum of X-rays modified by transmission through the sample

  7. Multibeam Fibre Laser Cutting

    DEFF Research Database (Denmark)

    Olsen, Flemming Ove

    The appearance of the high power high brilliance fibre laser has opened for new possibilities in laser materials processing. In laser cutting this laser has demonstrated high cutting performance compared to the dominating cutting laser, the CO2-laser. However, quality problems in fibre......-laser cutting have until now limited its application in metal cutting. In this paper the first results of proof-of-principle studies applying a new approach (patent pending) for laser cutting with high brightness short wavelength lasers will be presented. In the approach, multi beam patterns are applied...... to control the melt flow out of the cut kerf resulting in improved cut quality in metal cutting. The beam patterns in this study are created by splitting up beams from 2 single mode fibre lasers and combining these beams into a pattern in the cut kerf. The results are obtained with a total of 550 W of single...

  8. Multibeam fiber laser cutting

    DEFF Research Database (Denmark)

    Olsen, Flemming Ove; Hansen, Klaus Schütt; Nielsen, Jakob Skov

    2009-01-01

    The appearance of the high power high brilliance fiber laser has opened for new possibilities in laser materials processing. In laser cutting this laser has demonstrated high cutting performance compared to the dominating Cutting laser, the CO2 laser. However, quality problems in fiber......-laser cutting have until now limited its application to metal cutting. In this paper the first results of proof-of-principle Studies applying a new approach (patent pending) for laser cutting with high brightness and short wavelength lasers will be presented. In the approach, multibeam patterns are applied...... to control the melt flow out of the cut kerf resulting in improved cut quality in metal cutting. The beam patterns in this study are created by splitting up beams from two single mode fiber lasers and combining these beams into a pattern in the cut kerf. The results are obtained with a total of 550 W...

  9. History and principle of lasers

    International Nuclear Information System (INIS)

    Townes, Ch.H.; Schwob, C.; Julien, J.; Forget, S.; Robert-Philip, I.; Balcou, Ph.

    2010-01-01

    In the first article C.H. Townes, the inventor of the maser, describes the work and ideas that led to the invention of the laser. The second article explains how a laser operate and the third article reviews the main different types of laser: solid lasers, gas lasers, diode lasers and dye lasers

  10. Technological laser application

    International Nuclear Information System (INIS)

    Shia, D.O.; Kollen, R.; Rods, U.

    1980-01-01

    Problems of the technological applications of lasers are stated in the popular form. Main requirements to a technological laser as well as problems arising in designing any system using lasers have been considered. Areas of the laser applications are described generally: laser treatment of materials, thermal treatment, welding, broach and drilling of holes, scribing, microtreatment and adjustment of resistors, material cutting, investigations into controlled thermonuclear fussion

  11. Laser ablation principles and applications

    CERN Document Server

    1994-01-01

    Laser Ablation provides a broad picture of the current understanding of laser ablation and its many applications, from the views of key contributors to the field. Discussed are in detail the electronic processes in laser ablation of semiconductors and insulators, the post-ionization of laser-desorbed biomolecules, Fourier-transform mass spectroscopy, the interaction of laser radiation with organic polymers, laser ablation and optical surface damage, laser desorption/ablation with laser detection, and laser ablation of superconducting thin films.

  12. As dobras da imagem

    Directory of Open Access Journals (Sweden)

    Profª. Drª. Fátima Antunes da Silva (Yaska Antunes

    2009-05-01

    Full Text Available O presente trabalho tem por objetivo tentar compreender a produção da imagem visual no teatro. Para isso se vale da apropriação livre do conceito de “dobra? de Gilles Deleuze para se referir à multiplicidade de imagens criadas pelas diversas modalidades artísticas. Como no teatro há o entrelaçamento de imagens verbais – palavras enunciadas pelo texto dramático ou teatral – com imagens visuais – a visualidade advinda da composição cênica concreta que organiza no espaço ator e objeto –, a ênfase só podia recair sobre estas duas formas imagéticas. No caso do teatro, surge ainda a percepção de que para além da materialidade da cena, outras imagens emergem do confronto entre palco e platéia. Nesse sentido, imagem teatral seria então aquilo que surge da interação entre ator e espectador. A contribuição desse trabalho pode estar no fato de atualizar certos conceitos sobre a criação da imagem poética na poesia e no cinema para aplicá-los ao teatro. Ao recuperar o pensa-mento de Otávio Paz, Alfredo Bosi, Sergei Eisenstein, entre outros, bus-ca-se promover uma reflexão mais aprofundada sobre a construção visual no teatro.

  13. New power lasers

    International Nuclear Information System (INIS)

    Yamanaka, Masanobu; Daido, Hiroyuki; Imasaki, Kazuo.

    1989-01-01

    As the new power lasers which are expected to exert large extending effect to the fields of advanced science and technology including precision engineering as well as laser nuclear fusion, LD-excited solid laser, X-ray laser and free electron laser are taken up and outlined. Recently, the solid laser using high power output, high efficiency semiconductor laser as the exciting beam source has been developed. This is called laser diode (LD)-excited solid laser, and the heightening of power output and efficiency and the extension of life are planned. Its present status and application to medical use, laser machining, laser soldering and so on are described. In 1960, the laser in visible region appeared, however in 1985, the result of observing induced emission beam by electron collision exciting method was reported in USA. In the wavelength range of 200 A, holography and contact X-ray microscope applications were verified. The various types of soft X-ray laser and the perspective hereafter are shown. The principle of free electron laser is explained. In the free electron laser, wavelength can be changed by varying electron beam energy, the period of wiggler magnetic field and the intensity of magnetic field. Further, high efficiency and large power output are possible. Its present status, application and the perspective hereafter are reported. (K.I.)

  14. Laser applications in materials processing

    International Nuclear Information System (INIS)

    Ready, J.F.

    1980-01-01

    The seminar focused on laser annealing of semiconductors, laser processing of semiconductor devices and formation of coatings and powders, surface modification with lasers, and specialized laser processing methods. Papers were presented on the theoretical analysis of thermal and mass transport during laser annealing, applications of scanning continuous-wave and pulsed lasers in silicon technology, laser techniques in photovoltaic applications, and the synthesis of ceramic powders from laser-heated gas-phase reactants. Other papers included: reflectance changes of metals during laser irradiation, surface-alloying using high-power continuous lasers, laser growth of silicon ribbon, and commercial laser-shock processes

  15. Trauma da Veia Porta

    Directory of Open Access Journals (Sweden)

    Gustavo Pereira Fraga

    Full Text Available OBJETIVO: O trauma da veia porta é raro e freqüentemente fatal por causa de exsanguinação e alta incidência de lesões de estruturas adjacentes. Devido às pecualiaridades desta lesão e diferentes condutas propostas na literatura, o objetivo dos autores é relatar a experiência neste tipo de lesão. MÉTODO: Estudo retrospectivo, de janeiro de 1994 e dezembro de 2001, de 1370 pacientes submetidos à laparotomia devido trauma abdominal. Entre esses, 15 pacientes apresentavam lesão da veia porta. As lesões foram classificadas conforme a sua extensão e localização. RESULTADOS: O mecanismo de trauma predominante foi o penetrante. O diagnóstico da lesão foi realizado no intraoperatório. Os procedimentos executados foram: sutura, anastomose término-terminal e ligadura da veia porta. A mortalidade foi de 53,3%. CONCLUSÃO: A lesão da veia porta possui alta taxa de mortalidade e o atendimento adequado está diretamente relacionado à sobrevida.

  16. Raman fiber lasers

    CERN Document Server

    2017-01-01

    This book serves as a comprehensive, up-to-date reference about this cutting-edge laser technology and its many new and interesting developments. Various aspects and trends of Raman fiber lasers are described in detail by experts in their fields. Raman fiber lasers have progressed quickly in the past decade, and have emerged as a versatile laser technology for generating high power light sources covering a spectral range from visible to mid-infrared. The technology is already being applied in the fields of telecommunication, astronomy, cold atom physics, laser spectroscopy, environmental sensing, and laser medicine. This book covers various topics relating to Raman fiber laser research, including power scaling, cladding and diode pumping, cascade Raman shifting, single frequency operation and power amplification, mid-infrared laser generation, specialty optical fibers, and random distributed feedback Raman fiber lasers. The book will appeal to scientists, students, and technicians seeking to understand the re...

  17. Ceramic Laser Materials

    Directory of Open Access Journals (Sweden)

    Guillermo Villalobos

    2012-02-01

    Full Text Available Ceramic laser materials have come a long way since the first demonstration of lasing in 1964. Improvements in powder synthesis and ceramic sintering as well as novel ideas have led to notable achievements. These include the first Nd:yttrium aluminum garnet (YAG ceramic laser in 1995, breaking the 1 KW mark in 2002 and then the remarkable demonstration of more than 100 KW output power from a YAG ceramic laser system in 2009. Additional developments have included highly doped microchip lasers, ultrashort pulse lasers, novel materials such as sesquioxides, fluoride ceramic lasers, selenide ceramic lasers in the 2 to 3 μm region, composite ceramic lasers for better thermal management, and single crystal lasers derived from polycrystalline ceramics. This paper highlights some of these notable achievements.

  18. Infrared laser system

    International Nuclear Information System (INIS)

    Cantrell, C.D.; Carbone, R.J.

    1977-01-01

    An infrared laser system and method for isotope separation may comprise a molecular gas laser oscillator to produce a laser beam at a first wavelength, Raman spin flip means for shifting the laser to a second wavelength, a molecular gas laser amplifier to amplify said second wavelength laser beam to high power, and optical means for directing the second wavelength, high power laser beam against a desired isotope for selective excitation thereof in a mixture with other isotopes. The optical means may include a medium which shifts the second wavelength high power laser beam to a third wavelength, high power laser beam at a wavelength coincidental with a corresponding vibrational state of said isotope and which is different from vibrational states of other isotopes in the gas mixture

  19. Ceramic Laser Materials

    Science.gov (United States)

    Sanghera, Jasbinder; Kim, Woohong; Villalobos, Guillermo; Shaw, Brandon; Baker, Colin; Frantz, Jesse; Sadowski, Bryan; Aggarwal, Ishwar

    2012-01-01

    Ceramic laser materials have come a long way since the first demonstration of lasing in 1964. Improvements in powder synthesis and ceramic sintering as well as novel ideas have led to notable achievements. These include the first Nd:yttrium aluminum garnet (YAG) ceramic laser in 1995, breaking the 1 KW mark in 2002 and then the remarkable demonstration of more than 100 KW output power from a YAG ceramic laser system in 2009. Additional developments have included highly doped microchip lasers, ultrashort pulse lasers, novel materials such as sesquioxides, fluoride ceramic lasers, selenide ceramic lasers in the 2 to 3 μm region, composite ceramic lasers for better thermal management, and single crystal lasers derived from polycrystalline ceramics. This paper highlights some of these notable achievements. PMID:28817044

  20. Spectroscopic and imaging diagnostics of pulsed laser deposition laser plasmas

    International Nuclear Information System (INIS)

    Thareja, Raj K.

    2002-01-01

    An overview of laser spectroscopic techniques used in the diagnostics of laser ablated plumes used for thin film deposition is given. An emerging laser spectroscopic imaging technique for the laser ablation material processing is discussed. (author)

  1. Da Vinci Linjen

    DEFF Research Database (Denmark)

    Nissen, Poul

    Afsluttende evalueringsrapport fra følgeforskningen gennem tre år i forbindelse med dety pædagogiske arbejde på Blåbjerggårdskolens Da Vinci Linje for skolemotiverede og underpræsterende elever på 7. til 9. klassetrin.......Afsluttende evalueringsrapport fra følgeforskningen gennem tre år i forbindelse med dety pædagogiske arbejde på Blåbjerggårdskolens Da Vinci Linje for skolemotiverede og underpræsterende elever på 7. til 9. klassetrin....

  2. Thin-sheet zinc-coated and carbon steels laser welding

    Directory of Open Access Journals (Sweden)

    Peças, P.

    1998-04-01

    Full Text Available This paper describes the results of a research on CO2 laser welding of thin-sheet carbon steels (zinccoated and uncoated, at several thicknesses combinations. Laser welding has an high potential to be applied on sub-assemblies welding before forming to the automotive industry-tailored blanks. The welding process is studied through the analysis of parameters optimization, metallurgical quality and induced distortions by the welding process. The clamping system and the gas protection system developed are fully described. These systems allow the minimization of common thin-sheet laser welding defects like misalignement, and zinc-coated laser welding defects like porous and zinc volatilization. The laser welding quality is accessed by DIN 8563 standard, and by tensile, microhardness and corrosion tests.

    Este artigo descreve os resultados da investigação da soldadura laser de CO2 de chapa fina de acó carbono (simples e galvanizado, em diferentes combinações de espessura. A soldadura laser é um processo de elevado potencial no fabrico de tailored-blanks (sub-conjuntos para posterior enformação, constituidos por varias partes de diferentes materiais e espessuras para a indústria automóvel. São analisados os aspectos de optimização paramétrica, de qualidade metalúrgica da junta soldada e das deformações resultantes da soldadura. São descritos os mecanismos desenvolvidos de fixação das chapas e protecção gasosa, por forma a minimizar os defeitos típicos na soldadura laser de chapa fina como o desalinhamento e da soldadura laser de chapa galvanizada como os poros e a volatilização do zinco. Por fim apresentam-se resultados da avaliação da qualidade da soldadura do ponto de vista qualitativo através da norma DIN 8563, e do pontos de vista quantitativo através de ensaios de tracção, dureza e corrosão.

  3. Lasers in periodontics.

    Science.gov (United States)

    Elavarasu, Sugumari; Naveen, Devisree; Thangavelu, Arthiie

    2012-08-01

    Laser is one of the most captivating technologies in dental practice since Theodore Maiman in 1960 invented the ruby laser. Lasers in dentistry have revolutionized several areas of treatment in the last three and a half decades of the 20(th) century. Introduced as an alternative to mechanical cutting device, laser has now become an instrument of choice in many dental applications. Evidence suggests its use in initial periodontal therapy, surgery, and more recently, its utility in salvaging implant opens up a wide range of applications. More research with better designs are a necessity before lasers can become a part of dental armamentarium. This paper gives an insight to laser in periodontics.

  4. Excimer laser applications

    International Nuclear Information System (INIS)

    Fantoni, R.

    1988-01-01

    This lecture deals with laser induced material photoprocessing, especially concerning those processes which are initiated by u.v. lasers (mostly excimer laser). Advantages of using the u.v. radiation emitted by excimer lasers, both in photophysical and photochemical processes of different materials, are discussed in detail. Applications concerning microelectronics are stressed with respect to other applications in different fields (organic chemistry, medicine). As further applications of excimer lasers, main spectroscopic techniques for ''on line'' diagnostics which employ excimer pumped dye lasers, emitting tunable radiation in the visible and near u.v. are reviewed

  5. Lasers in chemical processing

    International Nuclear Information System (INIS)

    Davis, J.I.

    1982-01-01

    The high cost of laser energy is the crucial issue in any potential laser-processing application. It is expensive relative to other forms of energy and to most bulk chemicals. We show those factors that have previously frustrated attempts to find commercially viable laser-induced processes for the production of materials. Having identified the general criteria to be satisfied by an economically successful laser process and shown how these imply the laser-system requirements, we present a status report on the uranium laser isotope separation (LIS) program at the Lawrence Livermore National Laboratory

  6. Laser in urology. Laser i urologien

    Energy Technology Data Exchange (ETDEWEB)

    Breisland, H.O. (Aker Sykehus, Oslo (Norway))

    1991-09-01

    The neodymium YAG laser is particularly suited for endoscopic urologic surgery because the YAG laser light can be conducted in flexible fibers. Superficial bladder tumours can be treated under local anaesthesia in the outpatient department. The frequency of local recurrences is low, significantly lower than after electrosection or electrocoagulation. Selected cases of T2-muscle invasive bladder tumours can be cured with laser coagulation applied subsequently to transurethral resection. Combined treatment with electrosection and laser coagulation of localized prostatic cancer is a promising method which compares favourably with results obtained by other treatment modalities. Tumours in the upper urinary tract can be laser-treated through ureteroscopes or nephroscopes, but the treatment should be limited to low stage, low grade tumours. Laser is the treatment of choice for intraurethral condylomatas. Laser treatment of penil carcinoma gives excellent cosmetic and functional results and few local recurrences. Laser lithotripsy is a new technique for treatment of ureteric stones and photodynamic laser therapy is a promising tecnique for treatment of carcinoma in situ in the bladder empithelium. However, neither of these techniques are available for clinical use in Norway as yet. 17 refs., 3 figs., 1 tabs.

  7. Laser materials processing with diode lasers

    OpenAIRE

    Li, Lin; Lawrence, Jonathan; Spencer, Julian T.

    1996-01-01

    Laser materials processing is currently dominated by CO2, Nd-YAG and Excimer lasers. Continuous advances in semiconductor laser technology over the last decade have increased the average power output of the devices annualy by two fold, resulting in the commercial availability of the diode lasers today with delivery output powers in excess of 60W in CW mode and 5kW in qasi-CW mode. The advantages of compactness, high reliability, high efficiency and potential low cost, due to the mass producti...

  8. 1982 laser program annual report

    International Nuclear Information System (INIS)

    Hendricks, C.D.; Grow, G.R.

    1983-08-01

    This annual report covers the following eight sections: (1) laser program review, (2) laser systems and operation, (3) target design, (4) target fabrication, (5) fusion experiments program, (6) Zeus laser project, (7) laser research and development, and (8) energy applications

  9. The impact of treatment density and molecular weight for fractional laser-assisted drug delivery

    DEFF Research Database (Denmark)

    Haak, Christina S; Bhayana, Brijesh; Farinelli, William A

    2012-01-01

    Ablative fractional lasers (AFXL) facilitate uptake of topically applied drugs by creating narrow open micro-channels into the skin, but there is limited information on optimal laser settings for delivery of specific molecules. The objective of this study was to investigate the impact of laser...... treatment density (% of skin occupied by channels) and molecular weight (MW) for fractional CO(2) laser-assisted drug delivery. AFXL substantially increased intra- and transcutaneous delivery of polyethylene glycols (PEGs) in a MW range from 240 to 4300 Da (Nuclear Magnetic Resonance, p...

  10. Profilaxia da peste

    Directory of Open Access Journals (Sweden)

    Renato dos Santos Araújo

    1967-12-01

    Full Text Available O autor parte da premissa de que a profilaxia da doença infecciosa decorre do encadeamento epidemiológico: fonte de infecção-veículo transmissor - receptivel, para explicar a da peste, baseada no mesmo princípio. Depois de citar os 4 principais complexos epidemiológicos da peste e afirmar que tôda a profilaxia da doença consiste em atingir os dois primeiros elos dessas cadeias e proteger o último, passa a classificar os vários métodos profiláticos empregados em 2 grandes grupos: o das medidas destrutivas ou provisórias e o das medidas supressivas ou definitivas. Entre as primeiras arrola a desratização e a despulização, às quais acrescenta o tratamento e isolamento do doente e do portaãor, e entre as segundas inclui a anti-ratização e a imunização. A seguir, passa a explicar em que consistem essas várias medidas profiláticas e quais os agentes de que se tem lançado mão para executá-las, expendendo ao curso dessa exposição o conceito que formula a respeito de cada uma delas, à guisa de apreciação do seu valor relativo. Enaltece sobretudo as medidas supressivas ou definitivas, às quais empresta a maior significação na luta antipestosa, chamando a atenção, em especial, para a necessidade de estudos imunológicos para aperfeiçoamento do poder imunitário das vacinas de germes vivos avirulentos, que considera um grande recurso para a profilaxia da doença, sobretudo para a proteção do rurícola, cujo labor e modo de vida o expõem inevitavelmente a se infectar, por ocasião da ocorrência de epizootias de origem silvestre. Concluída essa primeira parte, passa a fazer o histórico de como se desenvolveu a campanha contra a peste, no Brasil, desde a época da sua invasão em 1899 pelo pôrto de Santos até os nossos dias. Nesse histórico, detem-se um pouco para expôr a atuação do extinto Serviço Nacional de Peste, o qual, criado em 1941, após a reorganização do Departamento Nacional de Saúde, passou

  11. Photonic bandgap fiber lasers and multicore fiber lasers for next generation high power lasers

    DEFF Research Database (Denmark)

    Shirakawa, A.; Chen, M.; Suzuki, Y.

    2014-01-01

    Photonic bandgap fiber lasers are realizing new laser spectra and nonlinearity mitigation that a conventional fiber laser cannot. Multicore fiber lasers are a promising tool for power scaling by coherent beam combination. © 2014 OSA....

  12. Laser in operative dentistry

    Directory of Open Access Journals (Sweden)

    E. Yasini

    1994-06-01

    Full Text Available Today laser has a lot of usage in medicine and dentistry. In the field of dentistry, laser is used in soft tissue surgery, sterilization of canals (in root canal therapy and in restorative dentistry laser is used for cavity preparation, caries removal, sealing the grooves (in preventive dentistry, etching enamel and dentin, composite polymerization and removal of tooth sensitivity. The use of Co2 lasers and Nd: YAG for cavity preparation, due to creating high heat causes darkness and cracks around the region of laser radiation. Also due to high temperature of these lasers, pulp damage is inevitable. So today, by using the Excimer laser especially the argon floride type with a wavelength of 193 nm, the problem of heat stress have been solved, but the use of lasers in dentistry, especially for cavity preparation needs more researches and evaluations.

  13. Laser for fusion energy

    International Nuclear Information System (INIS)

    Holzrichter, J.F.

    1995-01-01

    Solid state lasers have proven to be very versatile tools for the study and demonstration of inertial confinement fusion principles. When lasers were first contemplated to be used for the compression of fusion fuel in the late 1950s, the laser output energy levels were nominally one joule and the power levels were 10 3 watts (pulse duration's of 10 -3 sec). During the last 25 years, lasers optimized for fusion research have been increased in power to typically 100,000 joules with power levels approaching 10 14 watts. As a result of experiments with such lasers at many locations, DT target performance has been shown to be consistent with high gain target output. However, the demonstration of ignition and gain requires laser energies of several megajoules. Laser technology improvements demonstrated over the past decade appear to make possible the construction of such multimegajoule lasers at affordable costs. (author)

  14. Radiological protection against lasers

    Energy Technology Data Exchange (ETDEWEB)

    Ballereau, P

    1974-04-01

    A brief description of the biological effects of laser beams is followed by a review of the factors involved in eye and skin damage (factors linked with the nature of lasers and those linked with the organ affected) and a discussion of the problems involved in the determination of threshold exposure levels. Preventive measures are recommended, according to the type of laser (high-energy pulse laser, continuous laser, gas laser). No legislation on the subject exists in France or in Europe. Types of lasers marketed, threshold exposure levels for eye and skin, variations of admissible exposure levels according to wavelength, etc. are presented in tabular form. Nomogram for determination of safe distance for direct vision of a laser is included.

  15. Advances in Fiber Lasers

    National Research Council Canada - National Science Library

    Morse, T

    1999-01-01

    Most of the time of this contract has been devoted toward improvements in optical fiber lasers and toward gathering experience to improve our program in high power, cladding pumped optical fiber lasers...

  16. Laser Processing and Chemistry

    CERN Document Server

    Bäuerle, Dieter

    2011-01-01

    This book gives an overview of the fundamentals and applications of laser-matter interactions, in particular with regard to laser material processing. Special attention is given to laser-induced physical and chemical processes at gas-solid, liquid-solid, and solid-solid interfaces. Starting with the background physics, the book proceeds to examine applications of lasers in “standard” laser machining and laser chemical processing (LCP), including the patterning, coating, and modification of material surfaces. This fourth edition has been enlarged to cover the rapid advances in the understanding of the dynamics of materials under the action of ultrashort laser pulses, and to include a number of new topics, in particular the increasing importance of lasers in various different fields of surface functionalizations and nanotechnology. In two additional chapters, recent developments in biotechnology, medicine, art conservation and restoration are summarized. Graduate students, physicists, chemists, engineers, a...

  17. Fiber Laser Array

    National Research Council Canada - National Science Library

    Simpson, Thomas

    2002-01-01

    ...., field-dependent, loss within the coupled laser array. During this program, Jaycor focused on the construction and use of an experimental apparatus that can be used to investigate the coherent combination of an array of fiber lasers...

  18. ISTEF Laser Radar Program

    National Research Council Canada - National Science Library

    Stryjewski, John

    1998-01-01

    The BMDO Innovative Science and Technology Experimentation Facility (BMDO/ISTEF) laser radar program is engaged in an ongoing program to develop and demonstrate advanced laser radar concepts for Ballistic Missile Defense (BMD...

  19. Wavelength sweepable laser source

    DEFF Research Database (Denmark)

    2014-01-01

    Wavelength sweepable laser source is disclosed, wherein the laser source is a semiconductor laser source adapted for generating laser light at a lasing wavelength. The laser source comprises a substrate, a first reflector, and a second reflector. The first and second reflector together defines...... and having a rest position, the second reflector and suspension together defining a microelectromechanical MEMS oscillator. The MEMS oscillator has a resonance frequency and is adapted for oscillating the second reflector on either side of the rest position.; The laser source further comprises electrical...... connections adapted for applying an electric field to the MEMS oscillator. Furthermore, a laser source system and a method of use of the laser source are disclosed....

  20. Laser surgery - skin

    Science.gov (United States)

    ... Bleeding Problem not going away Infection Pain Scarring Skin color changes Some laser surgery is done when you are asleep and ... TG, Elston DM, eds. Andrews' Diseases of the Skin: Clinical ... lasers, lights, and tissue interactions. In: Hruza GJ, Avram ...

  1. Laser in operative dentistry

    OpenAIRE

    E. Yasini; Gh. Rahbari; A. Matorian

    1994-01-01

    Today laser has a lot of usage in medicine and dentistry. In the field of dentistry, laser is used in soft tissue surgery, sterilization of canals (in root canal therapy) and in restorative dentistry laser is used for cavity preparation, caries removal, sealing the grooves (in preventive dentistry), etching enamel and dentin, composite polymerization and removal of tooth sensitivity. The use of Co2 lasers and Nd: YAG for cavity preparation, due to creating high heat causes darkness and cracks...

  2. Tunable laser optics

    CERN Document Server

    Duarte, FJ

    2015-01-01

    This Second Edition of a bestselling book describes the optics and optical principles needed to build lasers. It also highlights the optics instrumentation necessary to characterize laser emissions and focuses on laser-based optical instrumentation. The book emphasizes practical and utilitarian aspects of relevant optics including the essential theory. This revised, expanded, and improved edition contains new material on tunable lasers and discusses relevant topics in quantum optics.

  3. Laser cutting system

    Science.gov (United States)

    Dougherty, Thomas J

    2015-03-03

    A workpiece cutting apparatus includes a laser source, a first suction system, and a first finger configured to guide a workpiece as it moves past the laser source. The first finger includes a first end provided adjacent a point where a laser from the laser source cuts the workpiece, and the first end of the first finger includes an aperture in fluid communication with the first suction system.

  4. Application of Various Lasers to Laser Trimming Resistance System

    Institute of Scientific and Technical Information of China (English)

    SUN Ji-feng

    2007-01-01

    Though the laser trimming resistance has been an old laser machining industry for over 30 years, the development of technology brings new alternative lasers which can be used for the traditional machining. The paper describes application of various lasers to laser trimming resistance system including early traditional krypton arc lamp pumped Nd:YAG to laser, modern popular diode pumped solid state laser and the present advanced harmonic diode pumped solid state laser. Using the new alternative lasers in the laser trimming resistance system can dramatically improve the yields and equipment performance.

  5. Laser technologies for laser accelerators. Annual report

    International Nuclear Information System (INIS)

    1985-01-01

    The primary result of the work reported is the determination of laser system architectures that satsify the requirements of high luminosity, high energy (about 1 TeV), electron accelerators. It has been found that high laser efficiency is a very hard driver for these accelerators as the total average laser output optical power is likely to fall above 10 MW. The luminosity requires rep rates in the kHz range, and individual pulse lengths in the 1-10 psec range are required to satisfy acceleration gradient goals. CO 2 and KrF lasers were chosen for study because of their potential to simultaneously satisfy the given requirements. Accelerator luminosity is reviewed, and requirements on laser system average power and rep rate are determined as a function of electron beam bunch parameters. Laser technologies are reviewed, including CO 2 , excimers, solid state, and free electron lasers. The proposed accelerator mechanisms are summarized briefly. Work on optical transport geometries for near and far field accelerators are presented. Possible exploitation of the CO 2 and DrF laser technology to generate the required pulse lengths, rep rates, and projected efficiencies is illustrated and needed development work is suggested. Initial efforts at developing a 50 GeV benchmark conceptual design and a 100 MeV demonstration experiment conceptual design are presented

  6. Laser induced pyrolysis techniques

    International Nuclear Information System (INIS)

    Vanderborgh, N.E.

    1976-01-01

    The application of laser pyrolysis techniques to the problems of chemical analysis is discussed. The processes occurring during laser pyrolysis are first briefly reviewed. The problems encountered in laser pyrolysis gas chromatography are discussed using the analysis of phenanthrene and binary hydrocarbons. The application of this technique to the characterization of naturally occurring carbonaceous material such as oil shales and coal is illustrated

  7. Solar pumped laser

    Science.gov (United States)

    Lee, J. H.; Hohl, F.; Weaver, W. R. (Inventor)

    1984-01-01

    A solar pumped laser is described in which the lasant is a gas that will photodissociate and lase when subjected to sunrays. Sunrays are collected and directed onto the gas lasant to cause it to lase. Applications to laser propulsion and laser power transmission are discussed.

  8. Introducing the Yellow Laser

    Science.gov (United States)

    Lincoln, James

    2018-01-01

    The author has acquired a yellow laser with the specific wavelength of 589 nm. Because this is the first time such a laser has been discussed in this journal, I feel it is appropriate to provide a discussion of its function and capabilities. Normal laser safety should be employed, such as not pointing it into eyes or at people, and using eye…

  9. Coatings for laser fusion

    International Nuclear Information System (INIS)

    Lowdermilk, W.H.

    1981-01-01

    Optical coatings are used in lasers systems for fusion research to control beam propagation and reduce surface reflection losses. The performance of coatings is important in the design, reliability, energy output, and cost of the laser systems. Significant developments in coating technology are required for future lasers for fusion research and eventual power reactors

  10. uv dye lasers

    International Nuclear Information System (INIS)

    Abakumov, G.A.; Fadeev, V.V.; Khokhlov, R.V.; Simonov, A.P.

    1975-01-01

    The most important property of visible dye lasers, that is, continuous wavelength tuning, stimulated the search for dyes capable to lase in uv. They were found in 1968. Now the need for tunable uv lasers for applications in spectroscopy, photochemistry, isotope separation, remote air and sea probing, etc. is clearly seen. A review of some recent advances in uv dye lasers is reviewed

  11. LaserFest Celebration

    Energy Technology Data Exchange (ETDEWEB)

    Dr. Alan Chodos; Elizabeth A. Rogan

    2011-08-25

    LaserFest was the yearlong celebration, during 2010, of the 50th anniversary of the demonstration of the first working laser. The goals of LaserFest were: to highlight the impact of the laser in its manifold commercial, industrial and medical applications, and as a tool for ongoing scientific research; to use the laser as one example that illustrates, more generally, the route from scientific innovation to technological application; to use the laser as a vehicle for outreach, to stimulate interest among students and the public in aspects of physical science; to recognize and honor the pioneers who developed the laser and its many applications; to increase awareness among policymakers of the importance of R&D funding as evidenced by such technology as lasers. One way in which LaserFest sought to meet its goals was to encourage relevant activities at a local level all across the country -- and also abroad -- that would be identified with the larger purposes of the celebration and would carry the LaserFest name. Organizers were encouraged to record and advertise these events through a continually updated web-based calendar. Four projects were explicitly detailed in the proposals: 1) LaserFest on the Road; 2) Videos; 3) Educational material; and 4) Laser Days.

  12. Laser beam cutting method. Laser ko ni yoru kaitai koho

    Energy Technology Data Exchange (ETDEWEB)

    Kutsumizu, A. (Obayashi Corp., Osaka (Japan))

    1991-07-01

    In this special issue paper concerning the demolition of concrete structures, was introduced a demolition of concrete structures using laser, of which practical application is expected due to the remarkable progress of generating power and efficiency of laser radiator. The characteristics of laser beam which can give a temperature of one million centigrade at the irradiated spot, the laser radiator consisting of laser medium, laser resonator and pumping apparatus, and the laser kinds for working, such as CO{sub 2} laser, YAG laser and CO laser, were described. The basic constitution of laser cutting equipment consisting of large generating power radiator, beam transmitter, beam condenser, and nozzle for working was also illustrated. Furthermore, strong and weak points in the laser cutting for concrete and reinforcement were enumerated. Applications of laser to cutting of reinforced and unreinforced concrete constructions were shown, and the concept and safety measure for application of laser to practical demolition was discussed. 5 refs., 8 figs.

  13. da Zehirlenmeleri

    Directory of Open Access Journals (Sweden)

    Necati Akbulut

    2015-02-01

    Full Text Available Gıda Teknolojisinin gelişmesi ile, gıda maddesinin tüketici için daha alımlı olmasını sağlamak, kısa zamanda bozulmasını engellemek ve pazara yeni çeşitler sunmak için bazı kimyasal maddeler kullanılmaya başlanılmıştır. Bunun yanında tarımda kullanılan kimyasal maddeler artmış, ambalaj sanayi gelişmiş, bu dada maddelerine bulaşan maddelerin türlerini arttırmıştır. Ayrıca gıda maddelerine belirli amacı olmadan katılan maddelerde vardır. Diğer taraftan tüketiciyi aldatmak, hile yapmak, çok kar sağlamak veya kötü kaliteyi gizlemek amacı ile de kullanılan maddeler bulunmaktadır. İster teknik zorunluk, ister hile amacıyla olsun bu tür yabancı maddeler öncelikle insan sağlığını ilgilendirmektedir. Bazı maddelerin vücuda alınması sakıncasız olduğu halde, bazıları sakıncalıdır. Sakıncasız olanlarında belirli bir sınırın üzerinde uzun süre alınmaları zararlı olabilmektedir. Bu toplum sağlığı sorunu birçok ülkeyi gıda sanayiinde kullanılan kimyasal maddelerin hoşgörü sınırlarının hesaplanması noktasına götürmüştür.

  14. Introduction to laser technology

    CERN Document Server

    Hitz, C Breck; Hecht, Jeff; Hitz, C Breck; John Wiley & Sons

    2001-01-01

    Electrical Engineering Introduction to Laser Technology , Third Edition. Would you like to know how a laser works, and how it can be modified for your own specific tasks? This intuitive third edition-previously published as Understanding Laser Technology , First and Second Editions-introduces engineers, scientists, technicians, and novices alike to the world of modern lasers, without delving into the mathematical details of quantum electronics. It is the only introductory text on the market today that explains the underlying physics and engineering applicable to all lasers. A unique combinatio.

  15. Quantum well lasers

    CERN Document Server

    Zory, Jr, Peter S; Kelley, Paul

    1993-01-01

    This book provides the information necessary for the reader to achieve a thorough understanding of all aspects of QW lasers - from the basic mechanism of optical gain, through the current technolgoical state of the art, to the future technologies of quantum wires and quantum dots. In view of the growing importance of QW lasers, this book should be read by all those with an active interest in laser science and technology, from the advanced student to the experienced laser scientist.* The first comprehensive book-length treatment of quantum well lasers* Provides a detailed treatment

  16. Coherent laser beam combining

    CERN Document Server

    Brignon, Arnaud

    2013-01-01

    Recently, the improvement of diode pumping in solid state lasers and the development of double clad fiber lasers have allowed to maintain excellent laser beam quality with single mode fibers. However, the fiber output power if often limited below a power damage threshold. Coherent laser beam combining (CLBC) brings a solution to these limitations by identifying the most efficient architectures and allowing for excellent spectral and spatial quality. This knowledge will become critical for the design of the next generation high-power lasers and is of major interest to many industrial, environme

  17. The laser thermonuclear fusion

    International Nuclear Information System (INIS)

    Coutant, J.; Dautray, R.; Decroisette, M.; Watteau, J.P.

    1987-01-01

    Principle of the thermonuclear fusion by inertial confinement: required characteristics of the deuterium-tritium plasma and of the high power lasers to be used Development of high power lasers: active media used; amplifiers; frequency conversion; beam quality; pulse conditioning; existing large systems. The laser-matter interaction: collision and collective interaction of the laser radiation with matter; transport of the absorbed energy; heating and compression of deuterium-tritium; diagnoses and their comparison with the numerical simulation of the experiment; performances. Conclusions: difficulties to overcome; megajoule lasers; other energy source: particles beams [fr

  18. Laser Cutting, Development Trends

    DEFF Research Database (Denmark)

    Olsen, Flemming Ove

    1999-01-01

    In this paper a short review of the development trends in laser cutting will be given.The technology, which is the fastest expanding industrial production technology will develop in both its core market segment: Flat bed cutting of sheet metal, as it will expand in heavy industry and in cutting...... of 3-dimensional shapes.The CO2-laser will also in the near future be the dominating laser source in the market, although the new developments in ND-YAG-lasers opens for new possibilities for this laser type....

  19. Lasers in space.

    CSIR Research Space (South Africa)

    Michaelis, MM

    2008-04-01

    Full Text Available cube, laser beam reflectors, placed on the Moon half a century ago. These early achievements will soon be followed by a plethora of experiments involving lasers in low earth orbit (LEO) or at Lagrange points. And not much later, laser communications... will stretch out as far as Mars and beyond. One important low Earth orbit (LEO) application is the removal of space debris by Earth based or LEO relayed lasers as promoted by Phipps et al.3. Another is military communication. The prominent L1 laser space...

  20. Tunable laser applications

    CERN Document Server

    Duarte, FJ

    2008-01-01

    Introduction F. J. Duarte Spectroscopic Applications of Tunable Optical Parametric Oscillators B. J. Orr, R. T. White, and Y. He Solid-State Dye Lasers Costela, I. García-Moreno, and R. Sastre Tunable Lasers Based on Dye-Doped Polymer Gain Media Incorporating Homogeneous Distributions of Functional Nanoparticles F. J. Duarte and R. O. James Broadly Tunable External-Cavity Semiconductor Lasers F. J. Duarte Tunable Fiber Lasers T. M. Shay and F. J. Duarte Fiber Laser Overview and Medical Applications

  1. New solid laser: Ceramic laser. From ultra stable laser to ultra high output laser

    International Nuclear Information System (INIS)

    Ueda, Kenichi

    2006-01-01

    An epoch-making solid laser is developed. It is ceramic laser, polycrystal, which is produced as same as glass and shows ultra high output. Ti 3+ :Al 2 O 3 laser crystal and the CPA (chirped pulse amplification) technique realized new ultra high output lasers. Japan has developed various kinds of ceramic lasers, from 10 -2 to 67 x 10 3 w average output, since 1995. These ceramic lasers were studied by gravitational radiation astronomy. The scattering coefficient of ceramic laser is smaller than single crystals. The new fast ignition method is proposed by Institute of Laser Engineering of Osaka University, Japan. Ultra-intense short pulse laser can inject the required energy to the high-density imploded core plasma within the core disassembling time. Ti 3+ :Al 2 O 3 crystal for laser, ceramic YAG of large caliber for 100 kW, transparent laser ceramic from nano-crystals, crystal grain and boundary layer between grains, the scattering coefficient of single crystal and ceramic, and the derived release cross section of Yb:YAG ceramic are described. (S.Y.)

  2. Advanced lasers for fusion

    International Nuclear Information System (INIS)

    Krupke, W.F.; George, E.V.; Haas, R.A.

    1979-01-01

    Laser drive systems' performance requirements for fusion reactors are developed following a review of the principles of inertial confinement fusion and of the technical status of fusion research lasers (Nd:glass; CO 2 , iodine). These requirements are analyzed in the context of energy-storing laser media with respect to laser systems design issues: optical damage and breakdown, medium excitation, parasitics and superfluorescence depumping, energy extraction physics, medium optical quality, and gas flow. Three types of energy-storing laser media of potential utility are identified and singled out for detailed review: (1) Group VI atomic lasers, (2) rare earth solid state hybrid lasers, and (3) rare earth molecular vapor lasers. The use of highly-radiative laser media, particularly the rare-gas monohalide excimers, are discussed in the context of short pulse fusion applications. The concept of backward wave Raman pulse compression is considered as an attractive technique for this purpose. The basic physics and device parameters of these four laser systems are reviewed and conceptual designs for high energy laser systems are presented. Preliminary estimates for systems efficiencies are given. (Auth.)

  3. A REFORMA DA IGREJA

    Directory of Open Access Journals (Sweden)

    Vítor Galdino Feller

    2014-01-01

    Full Text Available O pontificado do papa Francisco trouxe à tona o tema da reforma da Igreja. Retoma-se essa causa que acompanha a história da Igreja desde os seus primórdios e que interessa a todos os membros do povo santo de Deus. O texto divide-se em quatro partes. Primeiro, faz-se um apanhado histórico dos anseios de reforma da Igreja, mostrando que, muitas vezes em instâncias subterrâneas, sempre houve o desejo e também ações concretas de renovação. Em seguida, apresenta-se como razão para a reforma da Igreja o anúncio e a realização do Reino de Deus, pelo qual é preciso que a Igreja se volte à concretude humana e histórica de Jesus de Nazaré, pela superação do apego ao poder e às estruturas religiosas. Num terceiro momento, trata-se do critério pelo qual se mede a realização e a veracidade da reforma da Igreja: a santidade de cada fiel e do povo cristão no meio do mundo. Por fim, conclui-se que o caminho para a reforma da Igreja está na escuta dos clamores do Espírito Santo, que fala na própria Igreja e no mundo através do sensus fidei dos fiéis, das Igrejas particulares, dos pobres, das mulheres e das realidades terrestres. ABSTRACT: The pontificate of Pope Francis brought to the surface the theme of reform of the Church. This essay takes up this cause that accompanies the history of the Church from its beginnings and concerns all the members of the holy people of God. The text is divided into four parts. First, it gives a historical summary of the yearnings for reform of the Church, showing that, in many instances subterranean, there has always been the desire and also the concrete actions of renewal. Following from this, the essay presents as the reason for the reform of the Church the proclamation and the realization of the Kingdom of God, whereby it is necessary that the Church return to the concrete human and historical Jesus of Nazareth, in order to overcome the addiction to power and to religious structures. In the

  4. A cultura da internet

    OpenAIRE

    Cádima, Francisco Rui

    2017-01-01

    O novo ambiente digital é cada vez mais perturbante na sua dimensão ‘visível’ e está, em boa parte, incontrolável nessa área ainda algo desconhecida da Internet negra, conhecida por deep web ou dark net, convoca-nos para uma reflexão profunda de largo espectro, que não se pode vincular apenas às questões de mercado, tecnológicas e de redes, mas que nos vem alertar sobretudo para a ordem do político e da cidadania, do ‘desconhecido’ e do conhecimento e, enfim, do acesso à rede, quer no que is...

  5. Micromachining with copper lasers

    Science.gov (United States)

    Knowles, Martyn R. H.; Bell, Andy; Foster-Turner, Gideon; Rutterford, Graham; Chudzicki, J.; Kearsley, Andrew J.

    1997-04-01

    In recent years the copper laser has undergone extensive development and has emerged as a leading and unique laser for micromachining. The copper laser is a high average power (10 - 250 W), high pulse repetition rate (2 - 32 kHz), visible laser (511 nm and 578 nm) that produces high peak power (typically 200 kW), short pulses (30 ns) and very good beam quality (diffraction limited). This unique set of laser parameters results in exceptional micro-machining in a wide variety of materials. Typical examples of the capabilities of the copper laser include the drilling of small holes (10 - 200 micrometer diameter) in materials as diverse as steel, ceramic, diamond and polyimide with micron precision and low taper (less than 1 degree) cutting and profiling of diamond. Application of the copper laser covers the electronic, aerospace, automotive, nuclear, medical and precision engineering industries.

  6. Laser Applications in Orthodontics

    Science.gov (United States)

    Heidari, Somayeh; Torkan, Sepideh

    2013-01-01

    A laser is a collimated single wavelength of light which delivers a concentrated source of energy. Soon after different types of lasers were invented, investigators began to examine the effects of different wavelengths of laser energy on oral tissues, routine dental procedures and experimental applications. Orthodontists, along with other specialist in different fields of dentistry, can now benefit from several different advantages that lasers provide during the treatment process, from the beginning of the treatment, when separators are placed, to the time of resin residues removal from the tooth surface at the end of orthodontic treatment. This article outlines some of the most common usages of laser beam in orthodontics and also provides a comparison between laser and other conventional method that were the standard of care prior to the advent of laser in this field. PMID:25606324

  7. ORION laser target diagnostics

    International Nuclear Information System (INIS)

    Bentley, C. D.; Edwards, R. D.; Andrew, J. E.; James, S. F.; Gardner, M. D.; Comley, A. J.; Vaughan, K.; Horsfield, C. J.; Rubery, M. S.; Rothman, S. D.; Daykin, S.; Masoero, S. J.; Palmer, J. B.; Meadowcroft, A. L.; Williams, B. M.; Gumbrell, E. T.; Fyrth, J. D.; Brown, C. R. D.; Hill, M. P.; Oades, K.

    2012-01-01

    The ORION laser facility is one of the UK's premier laser facilities which became operational at AWE in 2010. Its primary mission is one of stockpile stewardship, ORION will extend the UK's experimental plasma physics capability to the high temperature, high density regime relevant to Atomic Weapons Establishment's (AWE) program. The ORION laser combines ten laser beams operating in the ns regime with two sub ps short pulse chirped pulse amplification beams. This gives the UK a unique combined long pulse/short pulse laser capability which is not only available to AWE personnel but also gives access to our international partners and visiting UK academia. The ORION laser facility is equipped with a comprehensive suite of some 45 diagnostics covering optical, particle, and x-ray diagnostics all able to image the laser target interaction point. This paper focuses on a small selection of these diagnostics.

  8. ORION laser target diagnostics.

    Science.gov (United States)

    Bentley, C D; Edwards, R D; Andrew, J E; James, S F; Gardner, M D; Comley, A J; Vaughan, K; Horsfield, C J; Rubery, M S; Rothman, S D; Daykin, S; Masoero, S J; Palmer, J B; Meadowcroft, A L; Williams, B M; Gumbrell, E T; Fyrth, J D; Brown, C R D; Hill, M P; Oades, K; Wright, M J; Hood, B A; Kemshall, P

    2012-10-01

    The ORION laser facility is one of the UK's premier laser facilities which became operational at AWE in 2010. Its primary mission is one of stockpile stewardship, ORION will extend the UK's experimental plasma physics capability to the high temperature, high density regime relevant to Atomic Weapons Establishment's (AWE) program. The ORION laser combines ten laser beams operating in the ns regime with two sub ps short pulse chirped pulse amplification beams. This gives the UK a unique combined long pulse/short pulse laser capability which is not only available to AWE personnel but also gives access to our international partners and visiting UK academia. The ORION laser facility is equipped with a comprehensive suite of some 45 diagnostics covering optical, particle, and x-ray diagnostics all able to image the laser target interaction point. This paper focuses on a small selection of these diagnostics.

  9. Robot-laser system

    International Nuclear Information System (INIS)

    Akeel, H.A.

    1987-01-01

    A robot-laser system is described for providing a laser beam at a desired location, the system comprising: a laser beam source; a robot including a plurality of movable parts including a hollow robot arm having a central axis along which the laser source directs the laser beam; at least one mirror for reflecting the laser beam from the source to the desired location, the mirror being mounted within the robot arm to move therewith and relative thereto to about a transverse axis that extends angularly to the central axis of the robot arm; and an automatic programmable control system for automatically moving the mirror about the transverse axis relative to and in synchronization with movement of the robot arm to thereby direct the laser beam to the desired location as the arm is moved

  10. Laser safety in dentistry

    Science.gov (United States)

    Wigdor, Harvey A.

    1997-05-01

    One of the major causes of anxiety in the dental clinic is the dental handpiece. Because dentists wish to provide a method which can replace the drill there has often been a premature use of the laser in dentistry. Various lasers have been introduced into the clinic before research has shown the laser used is of clinical benefit. Any new treatment method must not compromise the health of the patient being treated. Thus a method of evaluating the clinical abilities of dentists and their understanding the limitations of the laser used must be developed. Dentist must be trained in the basic interaction of the laser on oral tissues. The training has to concentrate on the variation of the laser wavelength absorption in the different tissues of the oral cavity. Because of the differences in the optical properties of these tissues great care must be exercised by practitioners using lasers on patients.

  11. Lasers in materials science

    CERN Document Server

    Ossi, Paolo; Zhigilei, Leonid

    2014-01-01

    This book covers various aspects of lasers in materials science, including a comprehensive overview on basic principles of laser-materials interactions and applications enabled by pulsed laser systems.  The material is organized in a coherent way, providing the reader with a harmonic architecture. While systematically covering the major current and emerging areas of lasers processing applications, the Volume provides examples of targeted modification of material properties achieved through careful control of the processing conditions and laser irradiation parameters. Special emphasis is placed on specific strategies aimed at nanoscale control of material structure and properties to match the stringent requirements of modern applications.  Laser fabrication of novel nanomaterials, which expands to the domains of photonics, photovoltaics, sensing, and biomedical applications, is also discussed in the Volume. This book assembles chapters based on lectures delivered at the Venice International School on Lasers...

  12. Alternate laser fusion drivers

    International Nuclear Information System (INIS)

    Pleasance, L.D.

    1979-11-01

    One objective of research on inertial confinement fusion is the development of a power generating system based on this concept. Realization of this goal will depend on the availability of a suitable laser or other system to drive the power plant. The primary laser systems used for laser fusion research, Nd 3+ : Glass and CO 2 , have characteristics which may preclude their use for this application. Glass lasers are presently perceived to be incapable of sufficiently high average power operation and the CO 2 laser may be limited by and issues associated with target coupling. These general perceptions have encouraged a search for alternatives to the present systems. The search for new lasers has been directed generally towards shorter wavelengths; most of the new lasers discovered in the past few years have been in the visible and ultraviolet region of the spectrum. Virtually all of them have been advocated as the most promising candidate for a fusion driver at one time or another

  13. Flexible Laser Metal Cutting

    DEFF Research Database (Denmark)

    Villumsen, Sigurd; Jørgensen, Steffen Nordahl; Kristiansen, Morten

    2014-01-01

    This paper describes a new flexible and fast approach to laser cutting called ROBOCUT. Combined with CAD/CAM technology, laser cutting of metal provides the flexibility to perform one-of-a-kind cutting and hereby realises mass production of customised products. Today’s laser cutting techniques...... possess, despite their wide use in industry, limitations regarding speed and geometry. Research trends point towards remote laser cutting techniques which can improve speed and geometrical freedom and hereby the competitiveness of laser cutting compared to fixed-tool-based cutting technology...... such as punching. This paper presents the concepts and preliminary test results of the ROBOCUT laser cutting technology, a technology which potentially can revolutionise laser cutting....

  14. [da Vinci surgical system].

    Science.gov (United States)

    Watanabe, Gou; Ishikawa, Norihiro

    2014-07-01

    The da Vinci surgical system was developed by Intuitive Surgical Inc. in the United States as an endoscopic surgical device to assist remote control surgeries. In 1998, the Da Vinci system was first used for cardiothoracic procedures. Currently a combination of robot-assisted internal thoracic artery harvest together with coronary artery bypass grafting (CABG) through a mini-incision (ThoraCAB) or totally endoscopic procedures including anastomoses under robotic assistance (TECAB) are being conducted for the treatment of coronary artery diseases. With the recent advances in catheter interventions, hybrid procedures combining catheter intervention with ThoraCAB or TECAB are anticipated in the future.On the other hand, with the decrease in number of coronary artery bypass surgeries, the share of valvular surgeries is expected to increase in the future. Among them, mitral valvuloplasty for mitral regurgitation is anticipated to be conducted mainly by low-invasive procedures, represented by minimally invasive cardiac surgery( MICS) and robot-assisted surgery. Apart from the intrinsic good surgical view, robotic-assisted systems offer additional advantages of the availability of an amplified view and the easy to observe the mitral valve in the physiological position. Thus, robotic surgical surgeries that make complicated procedures easier are expected to accomplish further developments in the future. Furthermore, while the number of surgeries for atrial septal defects has decreased dramatically following the widespread use of Amplatzer septal occluder, robotic surgery may become a good indication for cases in which the Amplatzer device is not indicated. In Japan, clinical trial of the da Vinci robotic system for heart surgeries has been completed. Statutory approval of the da Vinci system for mitral regurgitation and atrial septal defects is anticipated in the next few years.

  15. Lasers: principles, applications and energetic measures

    International Nuclear Information System (INIS)

    Subran, C.; Sagaut, J.; Lapointe, S.

    2009-01-01

    After having recalled the principles of a laser and the properties of the laser beam, the authors describe the following different types of lasers: solid state lasers, fiber lasers, semiconductor lasers, dye lasers and gas lasers. Then, their applications are given. Very high energy lasers can reproduce the phenomenon of nuclear fusion of hydrogen atoms. (O.M.)

  16. A utilização da teoria da aprendizagem significativa no ensino da Enfermagem

    OpenAIRE

    Alana Tamar Oliveira de Sousa; Nilton Soares Formiga; Simone Helena dos Santos Oliveira; Marta Miriam Lopes Costa; Maria Júlia Guimarães Oliveira Soares

    2015-01-01

    RESUMO Objetivo: sintetizar a produção científica acerca da Teoria da Aprendizagem Significativa no processo de ensino-aprendizagem em Enfermagem. Método: revisão integrativa realizada nas bases de dados MEDLINE, LILACS, SciELO, BDENF e CINAHL, com artigos que abordaram a temática ou aspectos da teoria da aprendizagem significativa de David Ausubel. Fizeram parte da amostra dez artigos, sendo seis escritos no idioma português e quatro no inglês, publicados de 1998 a 2013. Resultados: cinco...

  17. Os (descaminhos da identidade

    Directory of Open Access Journals (Sweden)

    Oliveira Roberto Cardoso de

    2000-01-01

    Full Text Available A conferência procurou apresentar uma interpretação das vicissitudes da identidade étnica e/ou nacional quando observada em situações de ambigüidade. É quando o processo identitário expressa crises reais ou virtuais, como as que têm lugar entre imigrantes latino-americanos nos Estados Unidos, entre povos de diferentes regiões da Espanha emigrados para Barcelona, entre catalães espanhóis, franceses e andorranos residentes em Andorra, e entre povos indígenas em regiões de fronteira do Brasil com países vizinhos. O exame do processo identitário que tem lugar em diferentes latitudes, nas Américas e na Europa, sugere que os fenômenos socioculturais de etnicidade e de nacionalidade possuem em comum características tais como a busca de reconhecimento da pessoa moral, o respeito à diferença e, como corolário ético, a elevação do que se pode definir como "taxa de consideração".

  18. Hepatotoxicidade da cianotoxina microcistina

    Directory of Open Access Journals (Sweden)

    Andréa de Castro Leal

    2004-01-01

    Full Text Available Constitui interesse emergente em saúde pública avaliar a possibilidade de intoxicação humana por biotoxinas de algas cianofíceas, principalmente as hepatotoxinas do grupo das microcistinas. A microcistina, um heptapeptídeo monocíclico, é produzida principalmente pela cianobactéria Microcistis aeruginosa. São caracterizadas por alguns aminoácidos variáveis, dois deles com uma estrutura não usual que possuem importante papel na hepatotoxidade da microcistina. Apesar do acometimento humano atribuído as microcistinas incluírem gastroenterite, reações alérgicas ou irritativas, neurotoxicidade, o principal alvo da toxina é o fígado. Nos hepatócitos as microcistinas são carreadas pelo sistema transportador do ácido biliar, inibindo a atividade da proteína fosfatase no citoplasma. A inibição leva a mudanças morfológicas na membrana plasmática pela hiperfosforilação de citoqueratinas, e à atividade de promoção tumoral pelas proteínas hiperfosforiladas. Os métodos de detecção e quantificação de microcistinas no ambiente incluem a cromatografia líquida, o bioensaio em camundongos e os testes imunoenzimáticos. O último vem ganhando destaque pela praticidade e alta sensibilidade.

  19. Lasers in space

    Science.gov (United States)

    Michaelis, M. M.; Forbes, A.; Bingham, R.; Kellett, B. J.; Mathye, A.

    2008-05-01

    A variety of laser applications in space, past, present, future and far future are reviewed together with the contributions of some of the scientists and engineers involved, especially those that happen to have South African connections. Historically, two of the earliest laser applications in space, were atmospheric LIDAR and lunar ranging. These applications involved atmospheric physicists, several astronauts and many of the staff recruited into the Soviet and North American lunar exploration programmes. There is a strong interest in South Africa in both LIDAR and lunar ranging. Shortly after the birth of the laser (and even just prior) theoretical work on photonic propulsion and space propulsion by laser ablation was initiated by Georgii Marx, Arthur Kantrowitz and Eugen Saenger. Present or near future experimental programs are developing in the following fields: laser ablation propulsion, possibly coupled with rail gun or gas gun propulsion; interplanetary laser transmission; laser altimetry; gravity wave detection by space based Michelson interferometry; the de-orbiting of space debris by high power lasers; atom laser interferometry in space. Far future applications of laser-photonic space-propulsion were also pioneered by Carl Sagan and Robert Forward. They envisaged means of putting Saenger's ideas into practice. Forward also invented a laser based method for manufacturing solid antimatter or SANTIM, well before the ongoing experiments at CERN with anti-hydrogen production and laser-trapping. SANTIM would be an ideal propellant for interstellar missions if it could be manufactured in sufficient quantities. It would be equally useful as a power source for the transmission of information over light year distances. We briefly mention military lasers. Last but not least, we address naturally occurring lasers in space and pose the question: "did the Big Bang lase?"

  20. Topoplastia de Cvintal assistida por laser de femtossegundo

    Directory of Open Access Journals (Sweden)

    Alexandre Takayoshi Ishizaki

    2013-06-01

    Full Text Available Apresentamos um relato de astigmatismo tardio progressivo pós-transplante de córnea para ceratocone, associado à afinamento periférico na junção doador-receptor, o que presumidamente pode ser considerado como recorrência da ectasia. O caso foi tratado por meio de Topoplastia de Cvintal assistida por laser de femtossegundo para a confecção da incisão com geometria "top hat", seguido de sutura com ajuste per-operatório guiado por ceratoscopia.

  1. Ação da laserterapia no processo de proliferação e diferenciação celular: revisão da literatura

    Directory of Open Access Journals (Sweden)

    Águida Cristina Gomes Henriques

    Full Text Available O uso da luz laser de baixa intensidade vem sendo utilizado como terapia coadjuvante ou de forma terapêutica isolada em várias especialidades odontológicas. Suas principais indicações incluem ação anti-inflamatória, analgésica e indutora da reparação tecidual. O poder cicatrizante do laser de baixa potência é discutido neste trabalho assim como os mecanismos de biomodulação e estimulação da mitose. Estas propriedades, já estudadas em células benignas, quando aplicadas em células neoplásicas malignas, abrem espaço para discussões. O objetivo do presente trabalho foi realizar uma revisão da literatura sobre os aspectos indutivos do laser no processo de proliferação celular principalmente no que se refere a estes mecanismos em células neoplásicas malignas.

  2. Complicações primárias da interface do 'flap' de LASIK

    Directory of Open Access Journals (Sweden)

    Renata Loures Bueno de Moraes

    2016-02-01

    Full Text Available RESUMO Laser in situ Keratomileusis (LASIK é uma das técnicas mais aceitas na cirurgia refrativa atualmente. Sua previsibilidade, reprodutibilidade, segurança e baixos índices de efeitos colaterais justificam a ampla difusão dessa técnica. Trata-se de um procedimento cirúrgico a laser cujo objetivo consiste na modificação da estrutura corneana, permitindo uma mudança do ponto focal do olho. Dessa forma, é possível corrigir ametropias tais como a miopia, astigmatismo e pequenos graus de hipermetropia. A técnica do LASIK consiste na criação de um flap corneano por meio da utilização de um microcerátomo ou do laser de femtossegundo. Em seguida, é realizada a aplicação do excimer laser sobre o leito estromal com posterior reposicionamento do flap, criando-se uma interface entre as lamelas anterior e posterior da córnea. Apesar das inúmeras vantagens, existem patologias que resultam de complicações primárias da interface do flap, que podem causar confusão no momento do diagnóstico, por possuírem semelhanças quanto à sua apresentação clínica. O objetivo desse trabalho é definir, caracterizar e comparar tais entidades com intuito de facilitar o diagnóstico diferencial dessas patologias evitando a adoção de um tratamento equivocado. Como resultado do estudo, são apresentadas recomendações quanto à conduta nos casos de cada patologia de interface, com investigação por meio da anamnese e exame clínico, a fim de permitir diagnóstico diferencial entre as principais entidades primárias da interface do procedimento LASIK.

  3. Laser system using ultra-short laser pulses

    Science.gov (United States)

    Dantus, Marcos [Okemos, MI; Lozovoy, Vadim V [Okemos, MI; Comstock, Matthew [Milford, MI

    2009-10-27

    A laser system using ultrashort laser pulses is provided. In another aspect of the present invention, the system includes a laser, pulse shaper and detection device. A further aspect of the present invention employs a femtosecond laser and binary pulse shaping (BPS). Still another aspect of the present invention uses a laser beam pulse, a pulse shaper and a SHG crystal.

  4. Emission spectrum of an electric-discharge ClF laser

    International Nuclear Information System (INIS)

    Deryugin, A A; Razhev, A M; Kochetov, Igor' V

    1998-01-01

    Experiments revealed a complex structure of the emission spectrum of an electric-discharge ClF laser, corresponding to the D'-A' transitions with a maximum near 285 nm. The vibrational bands in the emission spectrum overlapped at the base in the range 282-286 nm because of a high pressure in the gaseous active medium. Theoretical calculations were made and an interpretation was provided of the vibrational structure of the emission spectrum of the ClF molecules. The emission spectrum of the electric-discharge ClF laser was shown to consist of the 0-4, 0-5, 0-6, 1-6, 1-7, and 2-8 bands of the D'-A' transition. A total efficiency of 0.1% was achieved for the first time for the ClF laser and lasing was observed in a gaseous He - F 2 -BCl 3 active medium. (lasers, active media)

  5. Designing of Raman laser

    International Nuclear Information System (INIS)

    Zidan, M. D.; Al-Awad, F.; Alsous, M. B.

    2005-01-01

    In this work, we describe the design of the Raman laser pumped by Frequency doubled Nd-YAG laser (λ=532 nm) to generate new laser wavelengths by shifting the frequency of the Nd-YAG laser to Stokes region (λ 1 =683 nm, λ 2 =953.6 nm, λ 3 =1579.5 nm) and Antistokes region (λ ' 1 =435 nm, λ ' 2 =369.9 nm, λ ' 3=319.8 nm). Laser resonator has been designed to increase the laser gain. It consists of two mirrors, the back mirror transmits the pump laser beam (λ=532 nm) through the Raman tube and reflects all other generated Raman laser lines. Four special front mirrors were made to be used for the four laser lines λ 1 =683 nm, λ 2 =953.6 nm and λ ' 1 = 435 nm, λ ' 2 =369.9 nm. The output energy for the lines υ 1 s, υ 2 s, υ 1 as,υ 2 as was measured. The output energy of the Raman laser was characterized for different H 2 pressure inside the tube. (Author)

  6. Laser program overview

    International Nuclear Information System (INIS)

    Storm, E.; Coleman, L.W.

    1985-01-01

    The objectives of the Lawrence Livermore National Laboratory Laser Fusion program are to understand and develop the science and technology of inertial confinement fusion (ICF), and to utilize ICF in short- and long-term military applications, and, in the long-term, as a candidate for central-station civilian power generation. In 1984, using the Novette laser system, the authors completed experiments showing the very favorable scaling of laser-plama interactions with short-wavelength laser light. Their Novette experiments have unequivocally shown that short laser wavelength, i.e., less than 1 μm, is required to provide the drive necessary for efficient compression, ignition, and burn of DT fusion fuel. In other experiments with Novette, the authors made the first unambiguous observation of amplified spontaneous emission in the soft x-ray regime. The authors also conducted military applications and weapons physics experiments, which they discuss in detail in the classified volume of our Laser Program Annual Report. In the second thrust, advanced laser studies, they develop and test the concepts, components, and materials for present and future laser systems. Over the years, this has meant providing the technology base and scientific advances necessary to construct and operate a succession of six evermore-powerful laser systems. The latest of these, Nova, a 100-TW/100-kJ-class laser system, was completed in 1984. The Nd:glass laser continues to be the most effective and versatile tool for ICF and weapons physics because of its scalability in energy, the ability to efficiently convert its 1=μm output to shorter wavelengths, its ability to provide flexible, controlled pulse shaping, and its capability to adapt to a variety of irradiation and focusing geometries. For these reasons, many of our advanced laser studies are in areas appropriate to solid state laser technologies

  7. Laser pumped lasers for isotope separation

    International Nuclear Information System (INIS)

    Fry, S.M.

    1976-01-01

    A study of the isotope separation laser requirements reveals that high pressure polyatomic molecular gas laser pumped lasers can attain the necessary characteristics including tunability, energy output, pulse width, and repetition rate. The results of a search, made for molecules meeting the appropriate requirements for one of several pump schemes utilizing a CO 2 laser and with output in the 12 μm or 16μm wavelength range, are presented. Several methods of pumping are reviewed and two novel pump schemes are presented. A laser pumped laser device design is given, and operation of this device and associated diagnostic equipment is confirmed by repeating experiments in OCS and NH 3 . The results of OCS laser experiments show that an improvement in pump rate and output per unit length is obtained with the device, using a wedged transverse pumping scheme. A new multi-line laser system in NH 3 pumped by a TEA CO 2 laser is reported. More than forty transitions spanning the wavelength range of 9.2 to 13.8 μm are observed and identified. A strong output at 12.08 μm is one of the closest lines yet found to the required laser isotope separation wavelength. Far infrared emission near 65 μm is observed and is responsible for populating levels which lase in pure ammonia near 12.3 μm. Buffer gas (e.g., N 2 or He) pressures of approximately 40--800 torr cause energy transfer by collision-induced rotationaltransitions from the pumped antisymmetric to the lasing symmetric levels in the nu 2 = 1 band of ammonia. Most of the observed lines are aP(J,K) transitions which originate from the nu 2 /sup s/ band. Measurements of the pressure dependence of the laser output shows that some lines lase at pressures greater than one atmosphere. Transient behavior of the 12.08 μm line is calculated from a simplified analytic model and these calculations are compared to the experimental results

  8. Pattern Laser Annealing by a Pulsed Laser

    Science.gov (United States)

    Komiya, Yoshio; Hoh, Koichiro; Murakami, Koichi; Takahashi, Tetsuo; Tarui, Yasuo

    1981-10-01

    Preliminary experiments with contact-type pattern laser annealing were made for local polycrystallization of a-Si, local evaporation of a-Si and local formation of Ni-Si alloy. These experiments showed that the mask patterns can be replicated as annealed regions with a resolution of a few microns on substrates. To overcome shortcomings due to the contact type pattern annealing, a projection type reduction pattern laser annealing system is proposed for resistless low temperature pattern forming processes.

  9. High energy HF pulsed lasers

    International Nuclear Information System (INIS)

    Patterson, E.L.; Gerber, R.A.

    1976-01-01

    Recent experiments show that pulsed HF lasers are capable of producing high energy with good efficiency. Preliminary experiments show that the laser radiation from the high-gain medium can be controlled with a low-power probe laser beam or with low-level feedback. These results indicate that the HF laser may have potential for second-generation laser fusion experiments

  10. Low-level laser therapy and Calendula officinalis in repairing diabetic foot ulcers.

    Science.gov (United States)

    Carvalho, Ana Flávia Machado de; Feitosa, Maura Cristina Porto; Coelho, Nayana Pinheiro Machado de Freitas; Rebêlo, Veruska Cronemberger Nogueira; Castro, Juçara Gonçalves de; Sousa, Patrícia Regina Gomes de; Feitosa, Valrian Campos; Arisawa, Emilia Angela Lo Schiavo

    2016-01-01

    To evaluate the effects of low-level laser therapy isolated and associated with Calendula officinalis oil in treating diabetic foot ulcers. An experimental, randomized, controlled, prospective, interventional clinical case study using a quantitative approach. The sample consisted of 32 diabetic patients of both genders. Participants were randomly divided into four groups. Doppler Ultrasound evaluation of the Ankle-Brachial Index, brief pain inventory and analog pain scale were performed at baseline and after 30 days. Reduced pain was observed in the Low-level laser therapy and Low-level laser therapy associated with Essential Fatty Acids groups (pgrupos. Ultrassom Doppler, avaliação do Índice Tornozelo-Braquial, Inventário breve de dor e escala de dor analógica foram realizados no início e após 30 dias. Houve redução da dor nos grupos Terapia a Laser de Baixa Intensidade e Terapia a Laser de Baixa intensidade associada aos Ácidos Graxos Essenciais, com pgrupos mantiveram-se estáveis. Na análise da redução de área da lesão, o grupo Terapia a Laser de Baixa Intensidade associada aos Ácidos Graxos Essenciais apresentou uma significância p=0,0032, e o grupo Terapia a Laser de Baixa Intensidade, p=0,0428. A Terapia a Laser de Baixa Intensidade, realizada tanto isoladamente quanto associada ao óleo de Calendula officinalis, foi eficaz no alívio da dor e na aceleração do processo de reparo tecidual de pé diabético.

  11. Laser Safety Inspection Criteria

    International Nuclear Information System (INIS)

    Barat, K

    2005-01-01

    A responsibility of the Laser Safety Officer (LSO) is to perform laser safety audits. The American National Standard Z136.1 Safe use of Lasers references this requirement in several sections: (1) Section 1.3.2 LSO Specific Responsibilities states under Hazard Evaluation, ''The LSO shall be responsible for hazards evaluation of laser work areas''; (2) Section 1.3.2.8, Safety Features Audits, ''The LSO shall ensure that the safety features of the laser installation facilities and laser equipment are audited periodically to assure proper operation''; and (3) Appendix D, under Survey and Inspections, it states, ''the LSO will survey by inspection, as considered necessary, all areas where laser equipment is used''. Therefore, for facilities using Class 3B and or Class 4 lasers, audits for laser safety compliance are expected to be conducted. The composition, frequency and rigueur of that inspection/audit rests in the hands of the LSO. A common practice for institutions is to develop laser audit checklists or survey forms. In many institutions, a sole Laser Safety Officer (LSO) or a number of Deputy LSO's perform these audits. For that matter, there are institutions that request users to perform a self-assessment audit. Many items on the common audit list and the associated findings are subjective because they are based on the experience and interest of the LSO or auditor in particular items on the checklist. Beam block usage is an example; to one set of eyes a particular arrangement might be completely adequate, while to another the installation may be inadequate. In order to provide more consistency, the National Ignition Facility Directorate at Lawrence Livermore National Laboratory (NIF-LLNL) has established criteria for a number of items found on the typical laser safety audit form. These criteria are distributed to laser users, and they serve two broad purposes: first, it gives the user an expectation of what will be reviewed by an auditor, and second, it is an

  12. Single frequency semiconductor lasers

    CERN Document Server

    Fang, Zujie; Chen, Gaoting; Qu, Ronghui

    2017-01-01

    This book systematically introduces the single frequency semiconductor laser, which is widely used in many vital advanced technologies, such as the laser cooling of atoms and atomic clock, high-precision measurements and spectroscopy, coherent optical communications, and advanced optical sensors. It presents both the fundamentals and characteristics of semiconductor lasers, including basic F-P structure and monolithic integrated structures; interprets laser noises and their measurements; and explains mechanisms and technologies relating to the main aspects of single frequency lasers, including external cavity lasers, frequency stabilization technologies, frequency sweeping, optical phase locked loops, and so on. It paints a clear, physical picture of related technologies and reviews new developments in the field as well. It will be a useful reference to graduate students, researchers, and engineers in the field.

  13. Nuclear-pumped lasers

    CERN Document Server

    Prelas, Mark

    2016-01-01

    This book focuses on Nuclear-Pumped Laser (NPL) technology and provides the reader with a fundamental understanding of NPLs, a review of research in the field, and exploration of large scale NPL system design and applications. Early chapters look at the fundamental properties of lasers, nuclear-pumping and nuclear reactions that may be used as drivers for nuclear-pumped lasers. The book goes on to explore the efficient transport of energy from the ionizing radiation to the laser medium and then the operational characteristics of existing nuclear-pumped lasers. Models based on Mathematica, explanations and a tutorial all assist the reader’s understanding of this technology. Later chapters consider the integration of the various systems involved in NPLs and the ways in which they can be used, including beyond the military agenda. As readers will discover, there are significant humanitarian applications for high energy/power lasers, such as deflecting asteroids, space propulsion, power transmission and mining....

  14. Power Laser Ablation Symposia

    CERN Document Server

    Phipps, Claude

    2007-01-01

    Laser ablation describes the interaction of intense optical fields with matter, in which atoms are selectively driven off by thermal or nonthermal mechanisms. The field of laser ablation physics is advancing so rapidly that its principal results are seen only in specialized journals and conferences. This is the first book that combines the most recent results in this rapidly advancing field with authoritative treatment of laser ablation and its applications, including the physics of high-power laser-matter interaction. Many practical applications exist, ranging from inertial confinement fusion to propulsion of aerostats for pollution monitoring to laser ignition of hypersonic engines to laser cleaning nanoscale contaminants in high-volume computer hard drive manufacture to direct observation of the electronic or dissociative states in atoms and molecules, to studying the properties of materials during 200kbar shocks developed in 200fs. Selecting topics which are representative of such a broad field is difficu...

  15. Laser induced nuclear reactions

    International Nuclear Information System (INIS)

    Ledingham, Ken; McCanny, Tom; Graham, Paul; Fang Xiao; Singhal, Ravi; Magill, Joe; Creswell, Alan; Sanderson, David; Allott, Ric; Neely, David; Norreys, Peter; Santala, Marko; Zepf, Matthew; Watts, Ian; Clark, Eugene; Krushelnick, Karl; Tatarakis, Michael; Dangor, Bucker; Machecek, Antonin; Wark, Justin

    1998-01-01

    Dramatic improvements in laser technology since 1984 have revolutionised high power laser technology. Application of chirped-pulse amplification techniques has resulted in laser intensities in excess of 10 19 W/cm 2 . In the mid to late eighties, C. K. Rhodes and K. Boyer discussed the possibility of shining laser light of this intensity onto solid surfaces and to cause nuclear transitions. In particular, irradiation of a uranium target could induce electro- and photofission in the focal region of the laser. In this paper it is shown that μCi of 62 Cu can be generated via the (γ,n) reaction by a laser with an intensity of about 10 19 Wcm -2

  16. Lasers for isotope separation

    International Nuclear Information System (INIS)

    O'Hair, E.A.; Piltch, M.S.

    1976-01-01

    The Los Alamos Scientific Laboratory is conducting research on uranium enrichment. All processes being studied employ uranium molecules and use lasers to provide isotopic selectivity and enrichment. There are four well-defined infrared frequencies and two ultraviolet frequency bands of interest. The infrared frequencies are outside the range of the available lasers and an extensive research and development activity is currently underway. Lasers are available in the uv bands, however, much development work remains. The specification for the commercial uranium enrichment plant lasers will depend upon the results of the current enrichment experiments, the laser capital cost, reliability, and maintenance cost. For the processes under investigation there are specific photon requirements but latitude in how these requirements can be met. The final laser selections for the pilot plant need not be made until the mid-1980's. Between now and that time as extensive as possible a research and development effort will be maintained

  17. Inertial fusion by laser

    International Nuclear Information System (INIS)

    Dautray, R.; Watteau, J.-P.

    1980-01-01

    Following a brief historical survey of research into the effects of interaction of laser with matter, the principles of fusion by inertial confinement are described and the main parameters and possible levels given. The development of power lasers is then discussed with details of performances of the main lasers used in various laboratories, and with an assessment of the respective merits of neodymium glass, carbon dioxide or iodine lasers. The phenomena of laser radiation and its interaction with matter is then described, with emphasis on the results of experiments concerned with target implosion with the object of compressing and heating the mixture of heavy hydrogen and tritium to be ignited. Finally, a review is made of future possibilities opened up by the use of large power lasers which have recently become operational or are being constructed, and the ground still to be covered before a reactor can be produced [fr

  18. Principles of Lasers

    CERN Document Server

    Svelto, Orazio

    2010-01-01

    This new Fifth Edition of Principles of Lasers incorporates corrections to the previous edition. The text’s essential mission remains the same: to provide a wide-ranging yet unified description of laser behavior, physics, technology, and current applications. Dr. Svelto emphasizes the physical rather than the mathematical aspects of lasers, and presents the subject in the simplest terms compatible with a correct physical understanding. Praise for earlier editions: "Professor Svelto is himself a longtime laser pioneer and his text shows the breadth of his broad acquaintance with all aspects of the field … Anyone mastering the contents of this book will be well prepared to understand advanced treatises and research papers in laser science and technology." (Arthur L. Schawlow, 1981 Nobel Laureate in Physics) "Already well established as a self-contained introduction to the physics and technology of lasers … Professor Svelto’s book, in this lucid translation by David Hanna, can be strongly recommended for...

  19. Atomic iodine laser

    International Nuclear Information System (INIS)

    Fisk, G.A.; Gusinow, M.A.; Hays, A.K.; Padrick, T.D.; Palmer, R.E.; Rice, J.K.; Truby, F.K.; Riley, M.E.

    1978-05-01

    The atomic iodine photodissociation laser has been under intensive study for a number of years. The physics associated with this system is now well understood and it is possible to produce a 0.1 nsec (or longer) near-diffraction-limited laser pulse which can be amplified with negligible temporal distortion and little spatial deformation. The output of either a saturated or unsaturated amplifier consists of a high-fidelity near-diffraction-limited, energetic laser pulse. The report is divided into three chapters. Chapter 1 is a survey of the important areas affecting efficient laser operation and summarizes the findings of Chap. 2. Chapter 2 presents detailed discussions and evaluations pertinent to pumps, chemical regeneration, and other elements in the overall laser system. Chapter 3 briefly discusses those areas that require further work and the nature of the work required to complete the full-scale evaluation of the applicability of the iodine photodissociation laser to the inertial confinement program

  20. Strong field laser physics

    CERN Document Server

    2008-01-01

    Since the invention of the laser in the 1960s, people have strived to reach higher intensities and shorter pulse durations. High intensities and ultrashort pulse durations are intimately related. Recent developments have shown that high intensity lasers also open the way to realize pulses with the shortest durations to date, giving birth to the field of attosecond science (1 asec = 10-18s). This book is about high-intensity lasers and their applications. The goal is to give an up to date introduction to the technology behind these laser systems and to the broad range of intense laser applications. These applications include AMO (atomic molecular and optical) physics, x-ray science, attosecond science, plasma physics and particle acceleration, condensed matter science and laser micromachining, and finally even high-energy physics.

  1. Hepatotoxicidade da cianotoxina microcistina

    OpenAIRE

    Leal,Andréa de Castro; Soares,Manoel do Carmo Pereira

    2004-01-01

    Constitui interesse emergente em saúde pública avaliar a possibilidade de intoxicação humana por biotoxinas de algas cianofíceas, principalmente as hepatotoxinas do grupo das microcistinas. A microcistina, um heptapeptídeo monocíclico, é produzida principalmente pela cianobactéria Microcistis aeruginosa. São caracterizadas por alguns aminoácidos variáveis, dois deles com uma estrutura não usual que possuem importante papel na hepatotoxidade da microcistina. Apesar do acometimento humano atrib...

  2. Arduino based laser control

    OpenAIRE

    Bernal Muñoz, Ferran

    2015-01-01

    ARDUINO is a vey usefull platform for prototypes. In this project ARDUINO will be used for controling a Semiconductor Tuneable Laser. [ANGLÈS] Diode laser for communications control based on an Arduino board. Temperature control implementation. Software and hardware protection for the laser implementation. [CASTELLÀ] Control de un láser de comunicaciones ópticas desde el ordenador utilizando una placa Arduino. Implementación de un control de temperatura y protección software y hardware ...

  3. Shiva laser system performance

    International Nuclear Information System (INIS)

    Glaze, J.; Godwin, R.O.; Holzrichter, J.F.

    1978-01-01

    On November 18, 1977, after four years of experimentation, innovation, and construction, the Shiva High Energy Laser facility produced 10.2 kJ of focusable laser energy delivered in a 0.95 ns pulse. The Shiva laser, with its computer control system and delta amplifiers, demonstrated its versatility on May 18, 1978, when the first 20-beam target shot with delta amplifiers focused 26 TW on a target and produced a yield of 7.5 x 10 9 neutrons

  4. Lasers in Ophthalmology

    Institute of Scientific and Technical Information of China (English)

    1992-01-01

    In recent years,lasers have entered every fieldof medicine and especially so in ophthalmol-ogy.The scientific basis of lasers in ophthal-mology is based on three mechanisms:1.Photothermal effectLasers:argon,krypton,dye and diodeA thermal effect is generated when laserenergy is absorbed by pigment leading to in-creased vibration and therefore heat content.A

  5. Laser Journal (Selected Articles),

    Science.gov (United States)

    1982-09-10

    laser is described. The apparatus structure and some experimental results are reported. MATERIAL AND ELEMENT MAGNETO -OPTIC PROPERTIES OF Pr dYb),(1oAI...with a magneto -optical modulator. The measuring system is simple and sensitive, with reading accuracy of ±0.0050 and error 45%. STUDY ON EXPERIMENTAL...laser radiation therapy . He Fang de East Chiia Hospital APPLICATION OF N4d,:Y q LASER TO TREAT INTERNAL HEMERRHOID Zhuo Ruilin Zu Songlin (Shanghai

  6. Laser precision microfabrication

    CERN Document Server

    Sugioka, Koji; Pique, Alberto

    2010-01-01

    Miniaturization and high precision are rapidly becoming a requirement for many industrial processes and products. As a result, there is greater interest in the use of laser microfabrication technology to achieve these goals. This book composed of 16 chapters covers all the topics of laser precision processing from fundamental aspects to industrial applications to both inorganic and biological materials. It reviews the sate of the art of research and technological development in the area of laser processing.

  7. Aspectos moleculares da anemia falciforme

    Directory of Open Access Journals (Sweden)

    Galiza Neto Gentil Claudino de

    2003-01-01

    Full Text Available No presente artigo abordaram-se vários aspectos relacionados à natureza molecular da anemia falciforme, desordem hematológica de caráter hereditário que acomete expressivo número de indivíduos em várias regiões do mundo. As pesquisas realizadas em torno desta patologia da hemácia, ao longo de quase um século, a partir de 1910, cooperaram para a criação de um novo e importante segmento da ciência, denominado biologia molecular. A descoberta dos polimorfismos da mutação (GAT->GTG no gene que codifica a cadeia beta da hemoglobina, originando diferentes haplótipos da doença, permitiu um melhor e mais amplo conhecimento em torno da heterogeneidade clínica nos pacientes falcêmicos. Analisando a hemoglobina na sua estrutura normal e mutante, sua produção e evolução, pode-se ter um entendimento mais completo da fisiopatologia desta doença e da sua complexidade clínica.

  8. Lasers for the SILVA laser isotope separation process

    International Nuclear Information System (INIS)

    Lapierre, Y.

    1997-01-01

    The main principles of the laser isotope separation process for the production of enriched uranium at lower cost, are reviewed and the corresponding optimal laser characteristics are described. The development of the SILVA laser isotope separation process involved researches in the various domains of pump lasers, dye lasers, laser and optics systems and two test facilities for the feasibility studies which are expected for 1997

  9. High power lasers

    CERN Document Server

    Niku-Lari, A

    1989-01-01

    The use of lasers for the working and treatment of materials is becoming increasingly common in industry. However, certain laser applications, for example, in welding, cutting and drilling, are more widely exploited than others. Whilst the potential of lasers for the surface treatment of metals is well recognised, in practice, this particular application is a relative newcomer. The 24 papers in this volume present the latest research and engineering developments in the use of lasers for processes such as surface melting, surface alloying and cladding, and machining, as well as discussing th

  10. Degenerate band edge laser

    Science.gov (United States)

    Veysi, Mehdi; Othman, Mohamed A. K.; Figotin, Alexander; Capolino, Filippo

    2018-05-01

    We propose a class of lasers based on a fourth-order exceptional point of degeneracy (EPD) referred to as the degenerate band edge (DBE). EPDs have been found in parity-time-symmetric photonic structures that require loss and/or gain; here we show that the DBE is a different kind of EPD since it occurs in periodic structures that are lossless and gainless. Because of this property, a small level of gain is sufficient to induce single-frequency lasing based on a synchronous operation of four degenerate Floquet-Bloch eigenwaves. This lasing scheme constitutes a light-matter interaction mechanism that leads also to a unique scaling law of the laser threshold with the inverse of the fifth power of the laser-cavity length. The DBE laser has the lowest lasing threshold in comparison to a regular band edge laser and to a conventional laser in cavities with the same loaded quality (Q ) factor and length. In particular, even without mirror reflectors the DBE laser exhibits a lasing threshold which is an order of magnitude lower than that of a uniform cavity laser of the same length and with very high mirror reflectivity. Importantly, this novel DBE lasing regime enforces mode selectivity and coherent single-frequency operation even for pumping rates well beyond the lasing threshold, in contrast to the multifrequency nature of conventional uniform cavity lasers.

  11. Gigashot Optical Laser Demonstrator

    Energy Technology Data Exchange (ETDEWEB)

    Deri, R. J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2015-10-13

    The Gigashot Optical Laser Demonstrator (GOLD) project has demonstrated a novel optical amplifier for high energy pulsed lasers operating at high repetition rates. The amplifier stores enough pump energy to support >10 J of laser output, and employs conduction cooling for thermal management to avoid the need for expensive and bulky high-pressure helium subsystems. A prototype amplifier was fabricated, pumped with diode light at 885 nm, and characterized. Experimental results show that the amplifier provides sufficient small-signal gain and sufficiently low wavefront and birefringence impairments to prove useful in laser systems, at repetition rates up to 60 Hz.

  12. Notes on Laser Acceleration

    International Nuclear Information System (INIS)

    Tajima, T.

    2008-01-01

    This note intends to motivate our effort toward the advent of new methods of particle acceleration, utilizing the fast rising laser technology. By illustrating the underlying principles in an intuitive manner and thus less jargon-clad fashion, we seek a direction in which we shall be able to properly control and harness the promise of laser acceleration. First we review the idea behind the laser wakefield. We then go on to examine ion acceleration by laser. We examine the sheath acceleration in particular and look for the future direction that allows orderly acceleration of ions in high energies

  13. X-ray lasers

    CERN Document Server

    Elton, Raymond C

    2012-01-01

    The first in its field, this book is both an introduction to x-ray lasers and a how-to guide for specialists. It provides new entrants and others interested in the field with a comprehensive overview and describes useful examples of analysis and experiments as background and guidance for researchers undertaking new laser designs. In one succinct volume, X-Ray Lasers collects the knowledge and experience gained in two decades of x-ray laser development and conveys the exciting challenges and possibilities still to come._Add on for longer version of blurb_M>The reader is first introduced

  14. Lasers in materials processing

    International Nuclear Information System (INIS)

    Davis, J.I.; Rockower, E.B.

    1981-01-01

    A status report on the uranium Laser Isotope Separation (LIS) Program at the Lawrence Livermore National Laboratory is presented. Prior to this status report, process economic analysis is presented so as to understand how the unique properties of laser photons can be best utilized in the production of materials and components despite the high cost of laser energy. The characteristics of potential applications that are necessary for success are identified, and those factors that have up to now frustrated attempts to find commercially viable laser induced chemical and physical process for the production of new or existing materials are pointed out

  15. Mid-Infrared Lasers

    Data.gov (United States)

    National Aeronautics and Space Administration — Mid infrared solid state lasers for Differential Absorption Lidar (DIAL) systems required for understanding atmospheric chemistry are not available. This program...

  16. Laser fusion program overview

    International Nuclear Information System (INIS)

    Emmett, J.L.

    1977-01-01

    This program is structured to proceed through a series of well defined fusion milestones to proof of the scientific feasibility, of laser fusion with the Shiva Nova system. Concurrently, those key technical areas, such as advanced lasers, which are required to progress beyond proof of feasibility, are being studied. We have identified and quantified the opportunities and key technical issues in military applications, such as weapons effects simulations, and in civilian applications, such as central-station electric power production. We summarize the current status and future plans for the laser fusion program at LLL, emphasizing the civilian applications of laser fusion

  17. Physics of semiconductor lasers

    CERN Document Server

    Mroziewicz, B; Nakwaski, W

    2013-01-01

    Written for readers who have some background in solid state physics but do not necessarily possess any knowledge of semiconductor lasers, this book provides a comprehensive and concise account of fundamental semiconductor laser physics, technology and properties. The principles of operation of these lasers are therefore discussed in detail with the interrelations between their design and optical, electrical and thermal properties. The relative merits of a large number of laser structures and their parameters are described to acquaint the reader with the various aspects of the semiconductor l

  18. Principles of laser dynamics

    CERN Document Server

    Khanin, YI

    1995-01-01

    This monograph summarizes major achievements in laser dynamics over the past three decades. The book begins with two introductory Chapters. Chapter 1 offers general considerations on quantum oscillators, formulates the requirements for the laser key elements and shows how these requirements are met in different laser systems. The second Chapter proposes the mathematical models used in semiclassical laser theory, discusses the approximations and simplifications in particular cases, and specifies the range of applicability of these models. In Chapters 3-5 attention is given primarily to the stea

  19. Laser transmitter system

    International Nuclear Information System (INIS)

    Dye, R.A.

    1975-01-01

    A laser transmitter system is disclosed which utilizes mechanical energy for generating an output pulse. The laser system includes a current developing device such as a piezoelectric crystal which charges a storage device such as a capacitor in response to a mechanical input signal. The capacitor is coupled to a switching device, such as a silicon controlled rectifier (SCR). The switching device is coupled to a laser transmitter such as a GaAs laser diode, which provides an output signal in response to the capacitor being discharged

  20. Laser in urology

    International Nuclear Information System (INIS)

    Breisland, H.O.

    1991-01-01

    The neodymium YAG laser is particularly suited for endoscopic urologic surgery because the YAG laser light can be conducted in flexible fibers. Superficial bladder tumours can be treated under local anaesthesia in the outpatient department. The frequency of local recurrences is low, significantly lower than after electrosection or electrocoagulation. Selected cases of T2-muscle invasive bladder tumours can be cured with laser coagulation applied subsequently to transurethral resection. Combined treatment with electrosection and laser coagulation of localized prostatic cancer is a promising method which compares favourably with results obtained by other treatment modalities. Tumours in the upper urinary tract can be laser-treated through ureteroscopes or nephroscopes, but the treatment should be limited to low stage, low grade tumours. Laser is the treatment of choice for intraurethral condylomatas. Laser treatment of penil carcinoma gives excellent cosmetic and functional results and few local recurrences. Laser lithotripsy is a new technique for treatment of ureteric stones and photodynamic laser therapy is a promising tecnique for treatment of carcinoma in situ in the bladder empithelium. However, neither of these techniques are available for clinical use in Norway as yet. 17 refs., 3 figs., 1 tabs

  1. Tunable Microfluidic Dye Laser

    DEFF Research Database (Denmark)

    Olsen, Brian Bilenberg; Helbo, Bjarne; Kutter, Jörg Peter

    2003-01-01

    We present a tunable microfluidic dye laser fabricated in SU-8. The tunability is enabled by integrating a microfluidic diffusion mixer with an existing microfluidic dye laser design by Helbo et al. By controlling the relative flows in the mixer between a dye solution and a solvent......, the concentration of dye in the laser cavity can be adjusted, allowing the wavelength to be tuned. Wavelength tuning controlled by the dye concentration was demonstrated with macroscopic dye lasers already in 1971, but this principle only becomes practically applicable by the use of microfluidic mixing...

  2. Trends in laser micromachining

    Science.gov (United States)

    Gaebler, Frank; van Nunen, Joris; Held, Andrew

    2016-03-01

    Laser Micromachining is well established in industry. Depending on the application lasers with pulse length from μseconds to femtoseconds and wavelengths from 1064nm and its harmonics up to 5μm or 10.6μm are used. Ultrafast laser machining using pulses with pico or femtosecond duration pulses is gaining traction, as it offers very precise processing of materials with low thermal impact. Large-scale industrial ultrafast laser applications show that the market can be divided into various sub segments. One set of applications demand low power around 10W, compact footprint and are extremely sensitive to the laser price whilst still demanding 10ps or shorter laser pulses. A second set of applications are very power hungry and only become economically feasible for large scale deployments at power levels in the 100+W class. There is also a growing demand for applications requiring fs-laser pulses. In our presentation we would like to describe these sub segments by using selected applications from the automotive and electronics industry e.g. drilling of gas/diesel injection nozzles, dicing of LED substrates. We close the presentation with an outlook to micromachining applications e.g. glass cutting and foil processing with unique new CO lasers emitting 5μm laser wavelength.

  3. Scanning Color Laser Microscope

    Science.gov (United States)

    Awamura, D.; Ode, T.; Yonezawa, M.

    1988-01-01

    A confocal color laser microscope which utilizes a three color laser light source (Red: He-Ne, Green: Ar, Blue: Ar) has been developed and is finding useful applications in the semiconductor field. The color laser microscope, when compared to a conventional microscope, offers superior color separation, higher resolution, and sharper contrast. Recently some new functions including a Focus Scan Memory, a Surface Profile Measurement System, a Critical Dimension Measurement system (CD) and an Optical Beam Induced Current Function (OBIC) have been developed for the color laser microscope. This paper will discuss these new features.

  4. High Power Vanadate lasers

    CSIR Research Space (South Africa)

    Strauss

    2006-07-01

    Full Text Available stream_source_info Strauss1_2006.pdf.txt stream_content_type text/plain stream_size 3151 Content-Encoding UTF-8 stream_name Strauss1_2006.pdf.txt Content-Type text/plain; charset=UTF-8 Laser Research Institute... University of Stellenbosch www.laser-research.co.za High Power Vanadate lasers H.J.Strauss, Dr. C. Bollig, R.C. Botha, Prof. H.M. von Bergmann, Dr. J.P. Burger Aims 1) To develop new techniques to mount laser crystals, 2) compare the lasing properties...

  5. Laser adaptive holographic hydrophone

    Energy Technology Data Exchange (ETDEWEB)

    Romashko, R V; Kulchin, Yu N; Bezruk, M N; Ermolaev, S A [Institute of Automation and Control Processes, Far Eastern Branch of the Russian Academy of Sciences, Vladivostok (Russian Federation)

    2016-03-31

    A new type of a laser hydrophone based on dynamic holograms, formed in a photorefractive crystal, is proposed and studied. It is shown that the use of dynamic holograms makes it unnecessary to use complex optical schemes and systems for electronic stabilisation of the interferometer operating point. This essentially simplifies the scheme of the laser hydrophone preserving its high sensitivity, which offers the possibility to use it under a strong variation of the environment parameters. The laser adaptive holographic hydrophone implemented at present possesses the sensitivity at a level of 3.3 mV Pa{sup -1} in the frequency range from 1 to 30 kHz. (laser hydrophones)

  6. Introduction to laser technology

    CERN Document Server

    Hitz, C Breck; Hecht, Jeff

    2012-01-01

    The only introductory text on the market today that explains the underlying physics and engineering applicable to all lasersAlthough lasers are becoming increasingly important in our high-tech environment, many of the technicians and engineers who install, operate, and maintain them have had little, if any, formal training in the field of electro-optics. This can result in less efficient usage of these important tools. Introduction to Laser Technology, Fourth Edition provides readers with a good understanding of what a laser is and what it can and cannot do. The book explains what types of las.

  7. Laser-induced interactions

    International Nuclear Information System (INIS)

    Green, W.R.

    1979-01-01

    This dissertation discusses some of the new ways that lasers can be used to control the energy flow in a medium. Experimental and theoretical considerations of the laser-induced collision are discussed. The laser-induced collision is a process in which a laser is used to selectively transfer energy from a state in one atomic or molecular species to another state in a different species. The first experimental demonstration of this process is described, along with later experiments in which lasers were used to create collisional cross sections as large as 10 - 13 cm 2 . Laser-induced collisions utilizing both a dipole-dipole interaction and dipole-quadrupole interaction have been experimentally demonstrated. The theoretical aspects of other related processes such as laser-induced spin-exchange, collision induced Raman emission, and laser-induced charge transfer are discussed. Experimental systems that could be used to demonstrate these various processes are presented. An experiment which produced an inversion of the resonance line of an ion by optical pumping of the neutral atom is described. This type of scheme has been proposed as a possible method for constructing VUV and x-ray lasers

  8. Jet laser ion source

    International Nuclear Information System (INIS)

    Dem'yanov, A.V.; Sidorov, S.V.

    1994-01-01

    External laser injector of multicharged ions (MCI) is developed in which wide-aperture aberration-free wire gauze spherical shape electrodes are applied for effective MCI extraction from laser plasma and beam focusing. Axial plasma compression by solenoid magnetic field is used to reduce ion losses due to transverse movement of the scattering laser plasma. Transverse magnetic field created by another solenoid facilitates the effective laser plasma braking and consequently, leads to the narrowing of energy spectrum of plasma ions and its shift towards lower energies. 2 refs.; 3 figs

  9. Free electron laser

    International Nuclear Information System (INIS)

    Ortega, J.M.; Billardon, M.

    1986-01-01

    Operation principle of a laser and an oscillator are recalled together with the klystron one. In the free electron laser, electrons go through an undulator or an optical klystron. Principles of the last one are given. The two distinct ways of producing coherent radiation with an undulator and an optical klystron are presented. The first one is the use of the free electron laser, the second is to make use of the spontaneous emission generation (harmonics generation). The different current types of free electron lasers are presented (Stanford, Los Alamos, Aco at Orsay). Prospects and applications are given in conclusion [fr

  10. Laser cooling of solids

    CERN Document Server

    Petrushkin, S V

    2009-01-01

    Laser cooling is an important emerging technology in such areas as the cooling of semiconductors. The book examines and suggests solutions for a range of problems in the development of miniature solid-state laser refrigerators, self-cooling solid-state lasers and optical echo-processors. It begins by looking at the basic theory of laser cooling before considering such topics as self-cooling of active elements of solid-state lasers, laser cooling of solid-state information media of optical echo-processors, and problems of cooling solid-state quantum processors. Laser Cooling of Solids is an important contribution to the development of compact laser-powered cryogenic refrigerators, both for the academic community and those in the microelectronics and other industries. Provides a timely review of this promising field of research and discusses the fundamentals and theory of laser cooling Particular attention is given to the physics of cooling processes and the mathematical description of these processes Reviews p...

  11. Laser beam diagnostics for kilowatt power pulsed YAG laser

    International Nuclear Information System (INIS)

    Liu, Yi; Leong, Keng H.

    1992-01-01

    There is a growing need for high power YAG laser beam diagnostics with the recent introduction of such lasers in laser material processing. In this paper, we will describe the use of a commercially available laser beam analyzer (Prometec) to profile the laser beam from a 1600 W pulsed Nd:YAG laser that has a 1 mm fiber optic beam delivery system. The selection of laser pulse frequency and pulse width for the measurement is discussed. Laser beam propagation parameters by various optical components such as fibers and lenses can be determined from measurements using this device. The importance of such measurements will be discussed

  12. Laser Program annual report 1987

    Energy Technology Data Exchange (ETDEWEB)

    O' Neal, E.M.; Murphy, P.W.; Canada, J.A.; Kirvel, R.D.; Peck, T.; Price, M.E.; Prono, J.K.; Reid, S.G.; Wallerstein, L.; Wright, T.W. (eds.)

    1989-07-01

    This report discusses the following topics: target design and experiments; target materials development; laboratory x-ray lasers; laser science and technology; high-average-power solid state lasers; and ICF applications studies.

  13. Laser Program annual report 1987

    International Nuclear Information System (INIS)

    O'Neal, E.M.; Murphy, P.W.; Canada, J.A.; Kirvel, R.D.; Peck, T.; Price, M.E.; Prono, J.K.; Reid, S.G.; Wallerstein, L.; Wright, T.W.

    1989-07-01

    This report discusses the following topics: target design and experiments; target materials development; laboratory x-ray lasers; laser science and technology; high-average-power solid state lasers; and ICF applications studies

  14. Temperature controller of semiconductor laser

    Czech Academy of Sciences Publication Activity Database

    Matoušek, Vít; Číp, Ondřej

    2003-01-01

    Roč. 73, č. 3 (2003), s. 10 - 12 ISSN 0928-5008 Institutional research plan: CEZ:AV0Z2065902 Keywords : temperature controller * semiconductor laser * laser diode Subject RIV: BH - Optics, Masers, Lasers

  15. LASERS: A cryogenic slab CO laser

    Science.gov (United States)

    Ionin, Andrei A.; Kozlov, A. Yu; Seleznev, L. V.; Sinitsyn, D. V.

    2009-03-01

    A compact capacitive transverse RF-discharge-pumped slab CO laser with cryogenically cooled electrodes, which operates both in the cw and repetitively pulsed regimes, is fabricated. The laser operation is studied in the free running multifrequency regime at the vibrational - rotational transitions of the fundamental (V + 1 → V) vibrational bands of the CO molecule in the spectral region from 5.1 to 5.4 μm. Optimal operation conditions (gas mixture composition and pressure, RF pump parameters) are determined. It is shown that only gas mixtures with a high content of oxygen (up to 20% with respect to the concentration of CO molecules) can be used as an active medium of this laser. It is demonstrated that repetitively pulsed pumping is more efficient compared to cw pumping. In this case, quasi-cw lasing regime can be obtained. The maximum average output power of ~12 W was obtained for this laser operating on fundamental bands and its efficiency achieved ~14 %. The frequency-selective operation regime of the slab RF-discharge-pumped CO laser was realised at ~ 100 laser lines in the spectral region from 5.0 to 6.5 μm with the average output power of up to several tens of milliwatts in each line. Lasing at the transitions of the first vibrational overtone (V + 2 → V) of the CO molecule is obtained in the spectral region from 2.5 to 3.9 μm. The average output power of the overtone laser achieved 0.3 W. All the results were obtained without the forced gas mixture exchange in the discharge chamber. Under fixed experimental conditions, repetitively pulsed lasing (with fluctuations of the output characteristics no more than ±10 %) was stable for more than an hour.

  16. REFLETINDO SOBRE AS ESPECIFICIDADES DA GEOGRAFIA NA CRISE DA MODERNIDADE

    Directory of Open Access Journals (Sweden)

    Patrício A. S. Carneiro Carneiro

    2010-08-01

    Full Text Available O presente artigo discute a evolução da ciência moderna, bem como a crise desse paradigma dominante e seus efeitos sobre a geografia. Destaca ainda a necessidade da construção de um novo pensamento científico para além das fronteiras disciplinares e do método absoluto.

  17. A dignidade da pessoa humana na doutrina social da igreja

    Directory of Open Access Journals (Sweden)

    Manzone, Gianni

    2010-01-01

    Full Text Available O texto faz uma análise panorâmica sobre a compreensão da dignidade humana nos diversos textos da Doutrina Social da Igreja, mostrando o entendimento da mesma nos diversos documentos dos Papas, notadamente Leão XII, Pio XI, Pio XII e João Paulo II, além de apontar aspectos históricos e culturais que influenciaram cada pronunciamento, o que foi determinante para a evolução do pensamento do Magistério na questão social. O ponto de partida é a visão antropológica da Doutrina Social da Igreja, resumida em termos de “homem criado por Deus a sua imagem e resgatado pelo sangue de Jesus Cristo” (Sollicitudo Rei Socialis 29. A partir daí, há a defesa do primado do ser humano sobre o social e reivindicações totalitaristas que perpassaram a história recente da humanidade, embora a pessoa seja sempre um ser-em-relação e situado em uma sociedade determinada

  18. Os usos da diversidade

    Directory of Open Access Journals (Sweden)

    Clifford Geertz

    1999-05-01

    Full Text Available Resumo Ao discorrer sobre o “Futuro do Etnocentrismo”, este artigo parte da premissa de que a globalização, apesar de ter – em muitos casos – diminuído as diferenças entre povos, não tem amenizado os preconceitos e as formas de discriminação que ocorrem em nome dessas diferenças. Ele resgata a importância do antropólogo neste cenário lembrando que a diversidade cultural faz parte da sociedade complexa, remetendo-se não apenas a grupos étnicos ou nacionais bem delimitados, mas também a diferenças de geração, gênero, sexo e classe, entre outros. Neste contexto, a tolerância passiva de modos distantes de vida assim como a aceitação pragmática de nosso próprio paroquialismo são atitudes não somente intelectualmente desonestas mas também moralmente repreensíveis. É no encontro incômodo de subjetividades variantes na sua própria sociedade que o antropólogo define seu lugar.

  19. Continued Development of the AF/SGR Tricorder Program - Laser Eye Protection, Biomarkers of Laser Injury and Sensor Development

    Science.gov (United States)

    2012-05-15

    The less abundant serum proteins including our retinal proteins could have been removed along with albumin, hemoglobin and other depleted proteins... Nutrition , 1990. 51(2): p. 225-227. 3. Khan, D.A., et al., Evaluation of lead body burden in occupational workers by lead mobilization test. JPMA. The...operation. Instead, SSI needed to work with various AF organizations to educate them about the laser illumination problem and explain what kind of

  20. Progresso Interdisciplinar da Medicina

    Directory of Open Access Journals (Sweden)

    Jorge Correia-Pinto

    2018-02-01

    Full Text Available Portugal é muitas vezes citado como um bom exemplo na prestação de cuidados de saúde. Para tal concorreram a investigação (engenharia biomédica, a evolução técnica e a diferenciação clínica de diferentes especialidades. Para que esta evolução se transfira para o paciente com o seu máximo potencial, o diálogo e a interdisciplinaridade são imprescindíveis. Nesta Edição da Gazeta Médica, vários artigos trazem até ao leitor alguns exemplos desta evolução e interdisciplinaridade, que continua todos os dias nos nossos hospitais. Assim não podemos deixar de salientar o enorme progresso que houve no desenvolvimento de antimicrobianos e logicamente, o desafio que agora enfrentamos, o da resistência aos antibióticos. Por outro lado, a biologia molecular ao permitir-nos conhecer melhor a origem e fisiopatologia de inúmeras doenças, abriu um janela de oportunidade para individualizar o algoritmo clínico de orientação e tratamento clínicos. É com naturalidade, portanto, que a seguir encontramos vários artigos que relatam estratégias de individualização terapêutica, aumentando o efeito terapêutico, e minimizando os efeitos laterais. Sendo o relator deste editorial, um cirurgião, não posso deixar de dar enfoque à forma como a cirurgia minimamente invasiva tem revolucionado a intervenção cirúrgica. A história reporta-nos que foram os urologistas e os ginecologistas os pioneiros em muitos dos passos determinantes para chegarmos à cirurgia laparoscópica. Aqueles e os cirurgiões digestivos documentaram clinicamente que o desenvolvimento da cirurgia minimamente invasiva trouxe consigo várias vantagens que, resumidamente, resultam numa convalescença pós-operatória mais suave e mais curta. Inspirado pelos benefícios bem documentados de cirurgia minimamente invasiva em adultos e crianças, o século XXI começou com as primeiras tentativas de transportar as vantagens desta abordagem para recém-nascidos, tal

  1. Power balancing of multibeam laser fusion lasers

    International Nuclear Information System (INIS)

    Seka, W.; Morse, S.; Letzring, S.; Kremens, R.; Kessler, T.J.; Jaanimagi, P.; Keck, R.; Verdon, C.; Brown, D.

    1989-01-01

    The success of laser fusion depends to a good degree on the ability to compress the target to very high densities of ≥1000 times liquid DT. To achieve such compressions require that the irradiation nonuniformity must not exceed ∼1% rms over the whole time of the compression, particularly during the early phases of irradiation. The stringent requirements for the irradiation uniformity for laser fusion have been known for quite some time but until recently the energy balance was mistakenly equated to power balance. The authors describe their effort on energy balance and irradiation patterns on the target. They significantly improved the laser performance with respect to overall intensity distributions on target including the implementation of distributed (random) phase plates in each high power beam. However, the slightly varying performance of the third harmonic conversion crystals in the twenty-four beams of their laser system was generally compensated for by appropriately adjusted 1.054μm input laser energy. Computational analysis of the results of the recent high density campaign are shown

  2. Laser Stabilization with Laser Cooled Strontium

    DEFF Research Database (Denmark)

    Christensen, Bjarke Takashi Røjle

    The frequency stability of current state-of-the-art stabilized clock lasers are limited by thermal fluctuations of the ultra-stable optical reference cavities used for their frequency stabilization. In this work, we study the possibilities for surpassing this thermal limit by exploiting the nonli......The frequency stability of current state-of-the-art stabilized clock lasers are limited by thermal fluctuations of the ultra-stable optical reference cavities used for their frequency stabilization. In this work, we study the possibilities for surpassing this thermal limit by exploiting...... the nonlinear effects from coupling of an optical cavity to laser cooled atoms having a narrow transition linewidth. Here, we have realized such a system where a thermal sample of laser cooled strontium-88 atoms are coupled to an optical cavity. The strontium-88 atoms were probed on the narrow 1S0-3P1 inter......-combination line at 689 nm in a strongly saturated regime. The dynamics of the atomic induced phase shift and absorption of the probe light were experimentally studied in details with the purpose of applications to laser stabilization. The atomic sample temperature was in the mK range which brought this system out...

  3. High-power pulsed lasers

    International Nuclear Information System (INIS)

    Holzrichter, J.F.

    1980-01-01

    The ideas that led to the successful construction and operation of large multibeam fusion lasers at the Lawrence Livermore Laboratory are reviewed. These lasers are based on the use of Nd:glass laser materials. However, most of the concepts are applicable to any laser being designed for fusion experimentation. This report is a summary of lectures given by the author at the 20th Scottish University Summer School in Physics, on Laser Plasma Interaction. This report includes basic concepts of the laser plasma system, a discussion of lasers that are useful for short-pulse, high-power operation, laser design constraints, optical diagnostics, and system organization

  4. Laser safety tools and training

    CERN Document Server

    Barat, Ken

    2008-01-01

    Lasers perform many unique functions in a plethora of applications, but there are many inherent risks with this continually burgeoning technology. Laser Safety: Tools and Training presents simple, effective ways for users in a variety of facilities to evaluate the hazards of any laser procedure and ensure they are following documented laser safety standards.Designed for use as either a stand-alone volume or a supplement to Laser Safety Management, this text includes fundamental laser and laser safety information and critical laser use information rarely found in a single source. The first lase

  5. Os limites da competitividade

    Directory of Open Access Journals (Sweden)

    Henrique Rattner

    2009-08-01

    Full Text Available

    Costuma-se destacar os aspectos aparentemente positivos e as vantagens hipotéticas da concorrência e da competitividade entre empresas e também entre nações. Não se pode negar que a concorrência nos mercados tenha exercido uma função central e fundamental na gênese e na expansão do sistema de produção capitalista. Ela contribuiu para a geração e acumulação de riquezas materiais. Também estimulou e fortaleceu as aspirações de seus principais atores sociais, os empreendedores, de exigir uma organização política mais democrática em oposição ao regime feudal ou absolutista, em determinado período da história do mundo ocidental.

  6. Laser biostimulation in pediatrics

    Science.gov (United States)

    Utz, Irina A.; Lagutina, L. E.; Tuchin, Valery V.

    1995-01-01

    In the present paper the method and apparatus for percutaneous laser irradiation of blood (PLIB) in vessels (veins) are described. Results of clinical investigations of biostimulating effects under PLIB by red laser light (633 nm) in Cubiti and Saphena Magna veins are presented.

  7. Metallic DFB lasers

    NARCIS (Netherlands)

    Marell, M.J.H.; Nötzel, R.; Smit, M.K.; Hill, M.T.; Pozo, J.; Mortensen, M.; Urbach, P.; Leijtens, X.; Yousefi, M.

    2010-01-01

    In this paper we present our latest results on the design, fabrication and characterization of metal coated DFB lasers. These devices are based on a specialform of the metal-insulator-metal waveguides, which support plasmon gap modes. The distributed feedback provides control over the laser ~

  8. Laser processing of materials

    Indian Academy of Sciences (India)

    M. Senthilkumar (Newgen Imaging) 1461 1996 Oct 15 13:05:22

    The initial foundation of laser theory was laid by Einstein [11]. ..... general definition and scope of the processes as understood in conventional practice, but is ..... [54]. Laser welding of Ti-alloys. Welding. 2001 TiNi shape memory alloys. CW–CO2. Study corrosion, mechanical and shape memory properties of weldments.

  9. Microfluidic Dye Lasers

    DEFF Research Database (Denmark)

    Kristensen, Anders; Balslev, Søren; Gersborg-Hansen, Morten

    2006-01-01

    A technology for miniaturized, polymer based lasers, suitable for integration with planar waveguides and microfluidic networks is presented. The microfluidic dye laser device consists of a microfluidic channel with an embedded optical resonator. The devices are fabricated in a thin polymer film...

  10. Laser trabeculotomy versus trabeculoplasty

    International Nuclear Information System (INIS)

    Ticho, U.; Frucht, J.

    1984-01-01

    Although laser trabeculotomy has failed in glaucoma management, the laser trabeculoplasty (LTP) procedure has proved to be helpful. LTP was found to improve glaucoma control in 80-90% of open angle glaucoma patients, and less in secondary glaucoma and low tension glaucoma (50%). The procedure is more successful in dark iris eyes and complications are transient. (Auth.)

  11. 5. Laser plasma interaction

    International Nuclear Information System (INIS)

    Labaune, C.; Fuchs, J.; Bandulet, H.

    2002-01-01

    Imprint elimination, smoothing and preheat control are considerable problems in inertial fusion and their possible solution can be achieved by using low-density porous materials as a buffer in target design. The articles gathered in this document present various aspects of the laser-plasma interaction, among which we have noticed: -) numerical algorithmic improvements of the Vlasov solver toward the simulation of the laser-plasma interaction are proposed, -) the dependence of radiation temperatures and X-ray conversion efficiencies of hohlraum on the target structures and laser irradiation conditions are investigated, -) a study of laser interaction with ultra low-density (0,5 - 20 mg/cm 3 ) porous media analyzing backscattered light at incident laser frequency ω 0 and its harmonics 3*ω 0 /2 and 2*ω 0 is presented, -) investigations of laser interaction with solid targets and crater formation are carried out with the objective to determine the ablation loading efficiency, -) a self organization in an intense laser-driven plasma and the measure of the relative degree of order of the states in an open system based on the S-theorem are investigated, and -) the existence and stability of electromagnetic solitons generated in a relativistic interaction of an intense laser light with uniform under-dense cold plasma are studied

  12. Laser Interference Lithography

    NARCIS (Netherlands)

    van Wolferen, Hendricus A.G.M.; Abelmann, Leon; Hennessy, Theodore C.

    In this chapter we explain how submicron gratings can be prepared by Laser Interference Lithography (LIL). In this maskless lithography technique, the standing wave pattern that exists at the intersection of two coherent laser beams is used to expose a photosensitive layer. We show how to build the

  13. Levitated droplet dye laser

    DEFF Research Database (Denmark)

    Azzouz, H.; Alkafadiji, L.; Balslev, Søren

    2006-01-01

    a high quality optical resonator. Our 750 nL lasing droplets consist of Rhodamine 6G dissolved in ethylene glycol, at a concentration of 0.02 M. The droplets are optically pumped at 532 nm light from a pulsed, frequency doubled Nd:YAG laser, and the dye laser emission is analyzed by a fixed grating...

  14. Laser induced energy transfer

    International Nuclear Information System (INIS)

    Falcone, R.W.

    1979-01-01

    Two related methods of rapidly transferring stored energy from one excited chemical species to another are described. The first of these, called a laser induced collision, involves a reaction in which the energy balance is met by photons from an intense laser beam. A collision cross section of ca 10 - 17 cm 2 was induced in an experiment which demonstrated the predicted dependence of the cross section on wavelength and power density of the applied laser. A second type of laser induced energy transfer involves the inelastic scattering of laser radiation from energetically excited atoms, and subsequent absorption of the scattered light by a second species. The technique of producing the light, ''anti-Stokes Raman'' scattering of visible and infrared wavelength laser photons, is shown to be an efficient source of narrow bandwidth, high brightness, tunable radiation at vacuum ultraviolet wavelengths by using it to excite a rare gas transition at 583.7 A. In addition, this light source was used to make the first measurement of the isotopic shift of the helium metastable level at 601 A. Applications in laser controlled chemistry and spectroscopy, and proposals for new types of lasers using these two energy transfer methods are discussed

  15. Coaxial short pulsed laser

    Science.gov (United States)

    Nelson, M.A.; Davies, T.J.

    1975-08-01

    This invention relates to a laser system of rugged design suitable for use in a field environment. The laser itself is of coaxial design with a solid potting material filling the space between components. A reservoir is employed to provide a gas lasing medium between an electrode pair, each of which is connected to one of the coaxial conductors. (auth)

  16. LASER EN LARYNGOLOGIE

    African Journals Online (AJOL)

    9 mai 2013 ... permettant selon les besoins, coagulation, section ou vaporisation. ... tés par laser au service d'ORL et de chirurgie cervico-. LASER EN .... nose était de siège glottique pur à type de palmure dans. 3 cas et supra glottique ...

  17. Lasers in nuclear physics

    International Nuclear Information System (INIS)

    Inamura, T.T.

    1988-01-01

    The hyperfine interaction has been reviewed from a point of view of nuclear physics. Recent progress of nuclear spectroscopy with lasers is presented as one of laser studies of fundamental physics currently pursued in Japan. Especially, the hyperfine anomaly is discussed in connection with the origin of nuclear magnetism. (author)

  18. for aqueous dye lasers

    Indian Academy of Sciences (India)

    2014-02-12

    Feb 12, 2014 ... inclusion complex of RhB with the container molecule cucurbit[7]uril (CB[7]). Keywords. Temperature-dependent fluorescence; Rhodamine B; cucurbit[7]uril; host–guest complex; dye laser. PACS Nos 36.20.kd; 83.60.pq; 87.64.kv. 1. Introduction. Rhodamine B (RhB) is an efficient and photostable laser dye ...

  19. Electrodeless excimer laser

    International Nuclear Information System (INIS)

    Lisi, N.

    2001-01-01

    In this paper it is proposed how to build an excimer laser based on an electrodeless discharge (or Dielectric Barrier Discharge). Such laser could operate with a low energy per pulse ( 2 excimer molecule, whose emission wavelength in the VUV range (157 nm) at high reprate is particularly interesting in the micro-lithography field [it

  20. Auricular Acupuncture with Laser

    Science.gov (United States)

    Bahr, Frank

    2013-01-01

    Auricular acupuncture is a method which has been successfully used in various fields of medicine especially in the treatment of pain relief. The introduction of lasers especially low-level lasers into medicine brought besides the already existing stimulation with needles and electricity an additional technique to auricular acupuncture. This literature research looks at the historical background, the development and the anatomical and neurological aspects of auricular acupuncture in general and auricular laser acupuncture in detail. Preliminary scientific findings on auricular acupuncture with laser have been described in detail and discussed critically in this review article. The results of the studies have shown evidence of the effect of auricular laser acupuncture. However, a comparison of these studies was impossible due to their different study designs. The most important technical as well as study parameters were described in detail in order to give more sufficient evidence and to improve the quality of future studies. PMID:23935695

  1. Powering laser diode systems

    CERN Document Server

    Trestman, Grigoriy A

    2017-01-01

    This Tutorial Text discusses the competent design and skilled use of laser diode drivers (LDDs) and power supplies (PSs) for the electrical components of laser diode systems. It is intended to help power-electronic design engineers during the initial design stages: the choice of the best PS topology, the calculation of parameters and components of the PS circuit, and the computer simulation of the circuit. Readers who use laser diode systems for research, production, and other purposes will also benefit. The book will help readers avoid errors when creating laser systems from ready-made blocks, as well as understand the nature of the "mystical failures" of laser diodes (and possibly prevent them).

  2. Laser Beam Focus Analyser

    DEFF Research Database (Denmark)

    Nielsen, Peter Carøe; Hansen, Hans Nørgaard; Olsen, Flemming Ove

    2007-01-01

    the obtainable features in direct laser machining as well as heat affected zones in welding processes. This paper describes the development of a measuring unit capable of analysing beam shape and diameter of lasers to be used in manufacturing processes. The analyser is based on the principle of a rotating......The quantitative and qualitative description of laser beam characteristics is important for process implementation and optimisation. In particular, a need for quantitative characterisation of beam diameter was identified when using fibre lasers for micro manufacturing. Here the beam diameter limits...... mechanical wire being swept through the laser beam at varying Z-heights. The reflected signal is analysed and the resulting beam profile determined. The development comprised the design of a flexible fixture capable of providing both rotation and Z-axis movement, control software including data capture...

  3. Introducing the yellow laser

    Science.gov (United States)

    Lincoln, James

    2018-02-01

    The author has acquired a yellow laser with the specific wavelength of 589 nm. Because this is the first time such a laser has been discussed in this journal, I feel it is appropriate to provide a discussion of its function and capabilities. Normal laser safety should be employed, such as not pointing it into eyes or at people, and using eye protection for the young and inexperienced. It is important to note that 589 nm is the same wavelength as the Sodium-D line (doublet). This allows for the laser to serve as a replacement for sodium lamps, and, considering its rather high price, this added value should be balanced against its cost. What follows is a list of activities that showcase the yellow laser's unique promise as an engaging piece of technology that can be used in the teaching of physics.

  4. Regenerative similariton laser

    Directory of Open Access Journals (Sweden)

    Thibault North

    2016-05-01

    Full Text Available Self-pulsating lasers based on cascaded reshaping and reamplification (2R are capable of initiating ultrashort pulses despite the accumulation of large amounts of nonlinearities in all-fiber resonators. The spectral properties of pulses in self-similar propagation are compatible with cascaded 2R regeneration by offset filtering, making parabolic pulses suitable for the design of a laser of this recently introduced class. A new type of regenerative laser giving birth to similaritons is numerically investigated and shows that this laser is the analog of regenerative sources based solely on self-phase modulation and offset filtering. The regenerative similariton laser does not suffer from instabilities due to excessive nonlinearities and enables ultrashort pulse generation in a simple cavity configuration.

  5. Femtosecond Laser Filamentation

    CERN Document Server

    Chin, See Leang

    2010-01-01

    Femtosecond Laser Filamentation gives a comprehensive review of the physics of propagation of intense femtosecond laser pulses in optical media (principally air) and the applications and challenges of this new technique. This book presents the modern understanding of the physics of femtosecond laser pulse propagation, including unusual new effects such as the self-transformation of the pulse into a white light laser pulse, intensity clamping, the physics of multiple filamentation and competition, and how filaments’ ability to melt glass leads to wave guide writing. The potential applications of laser filamentation in atmospheric sensing and the generation of other electromagnetic pulses from the UV to the radio frequency are treated, together with possible future challenges in the excitation of super-excited states of molecules. Exciting new phenomena such as filament induced ultrafast birefringence and the excitation of molecular rotational wave packets and their multiple revivals in air (gases) will also ...

  6. NASA Space Laser Technology

    Science.gov (United States)

    Krainak, Michael A.

    2015-01-01

    Over the next two decades, the number of space based laser missions for mapping, spectroscopy, remote sensing and other scientific investigations will increase several fold. The demand for high wall-plug efficiency, low noise, narrow linewidth laser systems to meet different systems requirements that can reliably operate over the life of a mission will be high. The general trends will be for spatial quality very close to the diffraction limit, improved spectral performance, increased wall-plug efficiency and multi-beam processing. Improved spectral performance will include narrower spectral width (very near the transform limit), increased wavelength stability and or tuning (depending on application) and lasers reaching a wider range of wavelengths stretching into the mid-infrared and the near ultraviolet. We are actively developing high efficiency laser transmitter and high-sensitivity laser receiver systems that are suitable for spaceborne applications.

  7. Laser-diode pumped Nd:YAG lasers; Laser diode reiki Nd:YAG lasear

    Energy Technology Data Exchange (ETDEWEB)

    Yuasa, H.; Akiyama, Y.; Nakayama, M. [Toshiba Corp., Tokyo (Japan)

    2000-04-01

    Laser-diode pumped Nd:YAG lasers are expected to be applied to laser processing fields such as welding, cutting, drilling, and marking due to their potential for high efficiency and compactness. We are designing and developing laser-diode pumped Nd:YAG lasers using numerical analysis simulation techniques such as ray tracing and thermal analysis. We have succeeded in achieving a laser power of more than 3 kW with 20% efficiency, which is the best ever obtained. In addition, we have developed a laser-diode pumped green laser by second harmonic generation, for precision machining on silicon wafers. (author)

  8. Engenharia da mente

    OpenAIRE

    Bueno, Tânia Cristina D'Agostini

    2005-01-01

    Tese (doutorado) - Universidade Federal de Santa Catarina, Centro Tecnológico. Programa de Pós-Graduação em Engenharia de Produção. Na era da informação digitalizada, pesquisadores de diferentes áreas do conhecimento enfrentam uma nova questão: a organização semântica dos dados. A matéria tornou-se importante pelo fato das informações digitalmente disponíveis estarem dispostas, em sua maioria, como dados não-estruturados. Todavia, sabe-se que a estruturação de dados é um problema complexo ...

  9. Em favor da talassografia

    Directory of Open Access Journals (Sweden)

    Jean-Louis Boudou

    2001-01-01

    Full Text Available A Talassografia (“descrição do mar” interessa-sepelos impactos físicos, biológicos, ecológicos... culturais da violenta antropização dos ambientes costeiros (oceânicos e continentais, caracterizados pelaexigüidade, vulnerabilidade, fragilidade e plasticidade. Como o Brasil é um “país marítimo”, os geó-grafos (os talassógrafos brasileiros são convidadosa intensificar suas pesquisas nas áreas costeiras e acriar novas estruturas para divulgá-las: Revista, Encontros, Associação, Pós-Graduação... tudo em prolda talassografia.

  10. ANÁLISE PRELIMINAR DA CONTROLADORIA DA CIDADE DE SALVADOR

    Directory of Open Access Journals (Sweden)

    João Marcelo Pitiá Barreto

    2012-06-01

    Full Text Available A Controladoria tem sido alvo de estudos e destaque de análises e reflexões dos estudiosos das ciências que têm como foco o campo gerencial das organizações como a da Administração e Contabilidade. É importante observar a contribuição da Controladoria à governança pública, fundamento de uma gestão democrática e participativa. Nesse contexto, insere-se o objetivo deste estudo, refletir sobre atuação da controladoria pública da cidade de Salvador, observando a contribuição efetiva na governança nesse município. Os estudos foram desenvolvidos na Secretaria da Fazenda (SEFAZ do município a quem Controladoria vincula-se. Com caráter exploratório, essa investigação descritiva envolveu pesquisa de campo, análise de documentos e relatórios emitidos pela SEFAZ e pelo Tribunal de Contas do Município (TCM. Verificou-se o organograma da SEFAZ, seu orçamento e os pareceres do TCM. Os resultados expressam a importância da Controladoria e denotam a impressão de que, na instituição estudada, essa área não esteja cumprindo bem seu papel. 

  11. Ocorrência da ferrugem da videira em Minas Gerais

    Directory of Open Access Journals (Sweden)

    Adelica Aparecida Xavier

    2012-03-01

    Full Text Available A ferrugem da videira causada por Phakopsora euvitis Ono constitui-se numa ameaça às regiões produtoras de uva em função do potencial destrutivo da planta. A doença foi detectada no Brasil, pela primeira vez, em 2001. Atualmente, ela ocorre no Paraná, Mato Grosso do Sul, São Paulo, Rio Grande do Sul, Mato Grosso, Roraima, Espírito Santo e Santa Catarina. Em abril de 2010, observaram-se na estação experimental da Unimontes, Janaúba, Minas Gerais, plantas da cv. Niágara rosada com sintomas típicos da doença. A análise dos sintomas e a caracterização dos urediniósporos sésseis, levemente equinulados, com formato oval, ou elipsoide formado em urédias subepidérmicas na origem, inrompentes e com paráfises circundantes dorsalmente, levaram à diagnose de Phakopsora euvitis como o agente causal da doença. Este é o primeiro relato da doença no Estado de Minas Gerais.

  12. Laser Safety Inspection Criteria

    International Nuclear Information System (INIS)

    Barat, K.

    2005-01-01

    A responsibility of the Laser Safety Officer (LSO) is to perform laser audits. The American National Standard Z136.1 Safe Use of Lasers references this requirement through several sections. One such reference is Section 1.3.2.8, Safety Features Audits, ''The LSO shall ensure that the safety features of the laser installation facilities and laser equipment are audited periodically to assure proper operation''. The composition, frequency and rigor of that inspection/audit rests in the hands of the LSO. A common practice for institutions is to develop laser audit checklists or survey forms It is common for audit findings from one inspector or inspection to the next to vary even when reviewing the same material. How often has one heard a comment, ''well this area has been inspected several times over the years and no one ever said this or that was a problem before''. A great number of audit items, and therefore findings, are subjective because they are based on the experience and interest of the auditor to particular items on the checklist. Beam block usage, to one set of eyes might be completely adequate, while to another, inadequate. In order to provide consistency, the Laser Safety Office of the National Ignition Facility Directorate has established criteria for a number of items found on the typical laser safety audit form. The criteria are distributed to laser users. It serves two broad purposes; first, it gives the user an expectation of what will be reviewed by an auditor. Second, it is an opportunity to explain audit items to the laser user and thus the reasons for some of these items, such as labelling of beam blocks

  13. Historicidade da filosofia em Hegel e Heidegger

    OpenAIRE

    Christian Iber

    2017-01-01

    Gostaria de discutir, em forma de teses, a temática da historicidade da filosofia em contraste e na sua divergência em Hegel e Heidegger. Diferente do historicismo, que não soluciona o problema da historicidade da filosofia, porque ele dissolve tendencialmente a filosofia na história da filosofia e não coloca em especial a questão da verdade, Hegel e Heidegger desenvolvem uma teoria genuinamente filosófica da história da filosofia do interesse filosófico pela verdade. Esse interesse genuiname...

  14. Laser requirements for a laser fusion energy power plant

    Institute of Scientific and Technical Information of China (English)

    Stephen; E.Bodner; Andrew; J.Schmitt; John; D.Sethian

    2013-01-01

    We will review some of the requirements for a laser that would be used with a laser fusion energy power plant, including frequency, spatial beam smoothing, bandwidth, temporal pulse shaping, efficiency, repetition rate, and reliability. The lowest risk and optimum approach uses a krypton fluoride gas laser. A diode-pumped solid-state laser is a possible contender.

  15. Modelo para sistemas da qualidade como base da estrategia competitiva

    OpenAIRE

    Marco Antonio Silveira

    1999-01-01

    Resumo: Vários autores propõem a empresa como um sistema em transformação, sendo que esse enfoque sistêmico parece oferecer um meio efetivo de prover as capacidades estratégicas que são valorizadas pelos mercados atuais. Por outro lado, vem crescendo a consciência para o enfoque da qualidade como base da estratégia competitiva, onde esta é associada à lucratividade e incluída no processo de planejamento estratégico, tornando-se um instrumento eficaz de concorrência que, para fazer frente à di...

  16. Dimensão da maturidade à luz da logoterapia

    Directory of Open Access Journals (Sweden)

    Libardi, Tadeu Antonio

    2008-01-01

    Full Text Available O artigo aborda o tema da maturidade humana à luz da logoterapia, fundada por Viktor Emil Frankl. Nos dias de hoje, existe a frustração existencial, não mais a sexual, como analisada por Freud. Cada ser humano, como pessoa livre e responsável e tendo como meta a busca da maturidade, vai percorrendo seu próprio caminho, que o leva à ceitação de si, de seus limites e potencialidades e ao relacionamento social e religioso, capacitando-o ao confronto com o sofrimento humano

  17. FILTRAGEM DE NUVEM LASER PARA GERAÇÃO DE MDT POR KRIGAGEM

    Directory of Open Access Journals (Sweden)

    Vanessa Jordão Marcato Fernandes

    Full Text Available Esse artigo apresenta um método de filtragem de nuvem de pontos LASER para obtenção de um Modelo Digital de Terreno (MDT. O processo de filtragem é realizado com base em uma superfície aproximada gerada a partir de pontos amostrados sobre vias urbanas. Esses pontos são determinados por meio de linhas detectadas na imagem de intensidade do pulso laser via detector de Steger. A principal suposição do método é que o terreno tem um comportamento suave no interior das quadras e, dessa forma, os pontos amostrados ao longo das vias permitem, utilizando o método de interpolação por krigagem, uma representação adequada do terreno no interior das quadras, ou seja, relativamente próxima dos pontos LASER de terreno dessas regiões. Assim, a filtragem é realizada pela verificação da proximidade dos pontos da nuvem LASER original com a superfície aproximada gerada. Por fim, um MDT é obtido da nova amostra pelo método de interpolação por krigagem, melhorando a descrição da superfície. A partir dos experimentos realizados foi possível verificar a viabilidade do método proposto, com resultados de boa coerência visual e indicadores numéricos satisfatórios

  18. Measurements of laser parameters for the Shiva laser fusion facility

    International Nuclear Information System (INIS)

    Ozarski, R.G.

    1979-01-01

    Large laser systems require numerous laser diagnostics to provide configuration, performance and maintenance data to permit efficient operation. The following diagnostics for a large laser system named Shiva are discussed: (1) description of Shiva laser system, (2) what measurements are desired and or required and why, (3) what measurement techniques and packages are employed and a brief description of the operating principles of the sensors employed, and (4) the laser diagnostic data acquisition and display system

  19. LASER PROCESSING ON SINGLE CRYSTALS BY UV PULSE LASER

    OpenAIRE

    龍見, 雅美; 佐々木, 徹; 高山, 恭宜

    2009-01-01

    Laser processing by using UV pulsed laser was carried out on single crystal such as sapphire and diamond in order to understand the fundamental laser processing on single crystal. The absorption edges of diamond and sapphire are longer and shorter than the wave length of UV laser, respectively. The processed regions by laser with near threshold power of processing show quite different state in each crystal.

  20. Laser diode technology and applications

    International Nuclear Information System (INIS)

    Figueroa, L.

    1989-01-01

    This book covers a wide range of semiconductor laser technology, from new laser structures and laser design to applications in communications, remote sensing, and optoelectronics. The authors report on new laser diode physics and applications and present a survey of the state of the art as well as progress in new developments

  1. 1982 laser program annual report

    Energy Technology Data Exchange (ETDEWEB)

    Hendricks, C.D.; Grow, G.R. (eds.)

    1983-08-01

    This annual report covers the following eight sections: (1) laser program review, (2) laser systems and operation, (3) target design, (4) target fabrication, (5) fusion experiments program, (6) Zeus laser project, (7) laser research and development, and (8) energy applications. (MOW)

  2. Fractional laser skin resurfacing.

    Science.gov (United States)

    Alexiades-Armenakas, Macrene R; Dover, Jeffrey S; Arndt, Kenneth A

    2012-11-01

    Laser skin resurfacing (LSR) has evolved over the past 2 decades from traditional ablative to fractional nonablative and fractional ablative resurfacing. Traditional ablative LSR was highly effective in reducing rhytides, photoaging, and acne scarring but was associated with significant side effects and complications. In contrast, nonablative LSR was very safe but failed to deliver consistent clinical improvement. Fractional LSR has achieved the middle ground; it combined the efficacy of traditional LSR with the safety of nonablative modalities. The first fractional laser was a nonablative erbium-doped yttrium aluminum garnet (Er:YAG) laser that produced microscopic columns of thermal injury in the epidermis and upper dermis. Heralding an entirely new concept of laser energy delivery, it delivered the laser beam in microarrays. It resulted in microscopic columns of treated tissue and intervening areas of untreated skin, which yielded rapid reepithelialization. Fractional delivery was quickly applied to ablative wavelengths such as carbon dioxide, Er:YAG, and yttrium scandium gallium garnet (2,790 nm), providing more significant clinical outcomes. Adjustable laser parameters, including power, pitch, dwell time, and spot density, allowed for precise determination of percent surface area, affected penetration depth, and clinical recovery time and efficacy. Fractional LSR has been a significant advance to the laser field, striking the balance between safety and efficacy.

  3. The argon excimer laser

    International Nuclear Information System (INIS)

    Wrobel, W.G.

    1981-02-01

    The electron-beam-pumped argon eximer laser is investigated and tuned for the first time. The electron beam is generated by means of an improved coaxial field emmision diode in which argon gas is excited with power densities of 0.3 GW/cm 3 for 18 ns. The processes in the excited gas of 20 to 65 bar are described in the context of a kinetic model as a sequence of stationary states. Investigations of the amplified spontaneous emission (superfluorescence) confirm the predictions of this model. Only the absorption due to the excited Ar atoms is anomalously high. Reproducible operation of the argon eximer laser was achieved in a wide pressure range with various resonator arrangements. The wavelength of this shortest wavelength of this shortest wavelength excimer laser is 126 nm, the laser line width approx. 1.7 nm, the pulse length 7 to 13 ns, and the laser power 250 kW. The laser emission is tuned from 123.2 nm to 128.4 nm by two different methods (diffraction grating and prism). This tunable laser is thus the one with the shortest wavelength at present. Its line width is 0.25 to 0.4 nm, and the power ue 1.7 kW. (orig.)

  4. Laser wakefield acceleration

    International Nuclear Information System (INIS)

    Esarey, E.; Ting, A.; Sprangle, P.

    1989-01-01

    The laser wakefield accelerator (LWFA) is a novel plasma based electron acceleration scheme which utilizes a relativistic optical guiding mechanism for laser pulse propagation. In the LWFA, a short, high power, single frequency laser pulse is propagated through a plasma. As the laser pulse propagates, its radial and axial ponderomotive forces nonresonantly generate large amplitude plasma waves (wakefields) with a phase velocity equal to the group velocity of the pulse. A properly phased electron bunch may then be accelerated by the axial wakefield and focused by the transverse wakefield. Optical guiding of the laser pulse in the plasma is necessary in order to achieve high energies in a single stage of acceleration. At sufficiently high laser powers, optical guiding may be achieved through relativistic effects associated with the plasma electrons. Preliminary analysis indicates that this scheme may overcome some of the difficulties present in the plasma beat wave accelerator and in the plasma wakefield accelerator. Analytical and numerical calculations are presented which study both laser pulse propagation within a plasma as well as the subsequent generation of large amplitude plasma waves. In addition, the generation of large amplitude plasma waves in regimes where the plasma waves become highly nonlinear is examined

  5. Excimer laser decontamination

    Science.gov (United States)

    Sentis, Marc L.; Delaporte, Philippe C.; Marine, Wladimir; Uteza, Olivier P.

    2000-04-01

    The application of excimer laser ablation process to the decontamination of radioactive surfaces is discussed. This technology is very attractive because it allows to efficiently remove the contaminated particles without secondary waste production. To demonstrate the capability of such technology to efficiently decontaminate large area, we studied and developed a prototype which include a XeCl laser, an optical fiber delivery system and an ablated particles collection cell. The main physical processes taking place during UV laser ablation will be explained. The influence of laser wavelength, pulse duration and absorption coefficient of material will be discussed. Special studies have been performed to understand the processes which limit the transmission of high average power excimer laser through optical fiber, and to determine the laser conditions to optimize the value of this transmission. An in-situ spectroscopic analysis of laser ablation plasma allows the real time control of the decontamination. The results obtained for painting or metallic oxides removal from stainless steel surfaces will be presented.

  6. Color Laser Microscope

    Science.gov (United States)

    Awamura, D.; Ode, T.; Yonezawa, M.

    1987-04-01

    A color laser microscope utilizing a new color laser imaging system has been developed for the visual inspection of semiconductors. The light source, produced by three lasers (Red; He-Ne, Green; Ar, Blue; He-Cd), is deflected horizontally by an AOD (Acoustic Optical Deflector) and vertically by a vibration mirror. The laser beam is focused in a small spot which is scanned over the sample at high speed. The light reflected back from the sample is reformed to contain linear information by returning to the original vibration mirror. The linear light is guided to the CCD image sensor where it is converted into a video signal. Individual CCD image sensors are used for each of the three R, G, or B color image signals. The confocal optical system with its laser light source yields a color TV monitor image with no flaring and a much sharper resolution than that of the conventional optical microscope. The AOD makes possible a high speed laser scan and a NTSC or PAL TV video signal is produced in real time without any video memory. Since the light source is composed of R, G, and B laser beams, color separation superior to that of white light illumination is achieved. Because of the photometric linearity of the image detector, the R, G, and B outputs of the system are most suitably used for hue analysis. The CCD linear image sensors in the optical system produce no geometrical distortion, and good color registration is available principally. The output signal can be used for high accuracy line width measuring. The many features of the color laser microscope make it ideally suited for the visual inspection of semiconductor processing. A number of these systems have already been installed in such a capacity. The Color Laser Microscope can also be a very useful tool for the fields of material engineering and biotechnology.

  7. O carnaval da turba futurista

    Directory of Open Access Journals (Sweden)

    Ana Paula Freitas de Andrade

    2017-11-01

    Full Text Available O artigo trata da repercussão do futurismo italiano no Brasil, a partir da análise de crônicas de Menotti Del Picchia publicadas no Correio Paulistano, entre 1920 e 1922. Nessa época o escritor participou da polêmica sobre a vanguarda italiana veiculada na imprensa paulistana, publicando uma série de crônicas que, ao promover ideias futuristas e criticar a literatura passadista, estabelecem a formulação de um futurismo compósito, adaptado à realidade brasileira; e esboçam as principais teses do movimento modernista.

  8. Evapotranspiração da cultura da cebola

    Directory of Open Access Journals (Sweden)

    G. M. Oliveira

    2015-10-01

    Full Text Available A determinação da quantidade de água necessária para as culturas é um dos principais fatores para o correto planejamento, dimensionamento e manejo de qualquer sistema de irrigação. O presente trabalho teve como objetivo, comparar medida da evapotranspiração da cultura (ETc da cebola com estimativa obtida a partir da evapotranspiração de referência (ETo determinada por diferentes métodos e Kc proposto na literatura. O experimento foi conduzido no campo experimental do Departamento de Tecnologia e Ciências Sociais da Universidade do Estado da Bahia - UNEB, em Juazeiro, no período de junho a setembro de 2011. As medidas da ETc foram obtidas em evapotranspirômetros e as estimativas, a partir de ETo determinada pelos métodos: Penman-Monteith (padrão FAO, Penman-Monteith modificado por Villa Nova et al. (2004, Hargreaves & Samani, Makkink e Jensen & Haise e Kc proposto por Marouelli et al. (2005, para a cultura da cebola. É fundamental a avaliação de métodos de estimativa da evapotranspiração de referência antes de sua aplicação, pois erros consideráveis podem ser cometidos na determinação da quantidade de água a ser aplicada a uma cultura, o que repercutirá certamente, na produtividade.Evapotranspiration crop onionAbstract: The determination of the amount of water needed for crops is a major factor for the correct planning, sizing and management of any irrigation system. This study aimed to compare measure of crop evapotranspiration (ETc onion with estimates obtained from the reference evapotranspiration (ETo determined by different methods and Kc proposed in the literature. The experiment was conducted in the experimental field of the Department of Technology and Social Sciences, University of the State of Bahia, in Juazeiro, from June to September 2011. The ETc measurements were obtained in evapotranspirometers and estimates, from ETo determined by the methods: Penman-Monteith (FAO standard, Penman-Monteith modified

  9. Dye laser principles with applications

    CERN Document Server

    Duarte, Frank J; Liao, Peter F; Kelley, Paul

    1990-01-01

    A tutorial introduction to the field of dye lasers, Dye Laser Principles also serves as an up-to-date overview for those using dye lasers as research and industrial tools. A number of the issues discussed in this book are pertinent not only to dye lasers but also to lasers in general. Most of the chapters in the book contain problem sets that expand on the material covered in the chapter.Key Features* Dye lasers are among the most versatile and successful laser sources currently available in use Offering both pulsed and continuous-wave operation and tunable from the near ultraviole

  10. Temperature stabilization of injection lasers

    International Nuclear Information System (INIS)

    Albanese, A.

    1987-01-01

    Apparatus which stabilizes the temperature, and thereby the output wavelength, of an injection laser. Means monitor the laser terminal voltage across a laser and derive a voltage therefrom which is proportional to the junction voltage of the laser. Means compares the voltage to a reference value from source and a temperature controller adjusts the laser temperature in response to the results of the comparison. Further embodiments of the present invention vary the output wavelength of the laser by varying the reference value from source against which the laser junction voltage is compared. (author)

  11. Latest development of laser cutting

    OpenAIRE

    Wetzig, Andreas; Herwig, Patrick; Hauptmann, Jan; Goppold, Cindy; Baumann, Robert; Fürst, Andreas; Rose, Michael; Pinder, Thomas; Mahrle, Achim; Beyer, Eckhard

    2016-01-01

    Laser cutting was one of the first applications of laser material processing. Today, laser cutting is the most widespread application among laser material processing besides laser marking. Meanwhile, nearly each material can be cut by means of a laser, in particular since ultra short pulse lasers are available in the power range of up to 100 W. The to be cut material can come with thicknesses from a few microns till tens of millimeters as flat stock or as free form shapes. The paper will conc...

  12. Color speckle in laser displays

    Science.gov (United States)

    Kuroda, Kazuo

    2015-07-01

    At the beginning of this century, lighting technology has been shifted from discharge lamps, fluorescent lamps and electric bulbs to solid-state lighting. Current solid-state lighting is based on the light emitting diodes (LED) technology, but the laser lighting technology is developing rapidly, such as, laser cinema projectors, laser TVs, laser head-up displays, laser head mounted displays, and laser headlamps for motor vehicles. One of the main issues of laser displays is the reduction of speckle noise1). For the monochromatic laser light, speckle is random interference pattern on the image plane (retina for human observer). For laser displays, RGB (red-green-blue) lasers form speckle patterns independently, which results in random distribution of chromaticity, called color speckle2).

  13. Teradiode's high brightness semiconductor lasers

    Science.gov (United States)

    Huang, Robin K.; Chann, Bien; Burgess, James; Lochman, Bryan; Zhou, Wang; Cruz, Mike; Cook, Rob; Dugmore, Dan; Shattuck, Jeff; Tayebati, Parviz

    2016-03-01

    TeraDiode is manufacturing multi-kW-class ultra-high brightness fiber-coupled direct diode lasers for industrial applications. A fiber-coupled direct diode laser with a power level of 4,680 W from a 100 μm core diameter, BPP) of 3.5 mm-mrad and is the lowest BPP multi-kW-class direct diode laser yet reported. This laser is suitable for industrial materials processing applications, including sheet metal cutting and welding. This 4-kW fiber-coupled direct diode laser has comparable brightness to that of industrial fiber lasers and CO2 lasers, and is over 10x brighter than state-of-the-art direct diode lasers. We have also demonstrated novel high peak power lasers and high brightness Mid-Infrared Lasers.

  14. Organic solid-state lasers

    CERN Document Server

    Forget, Sébastien

    2013-01-01

    Organic lasers are broadly tunable coherent sources, potentially compact, convenient and manufactured at low-costs. Appeared in the mid 60’s as solid-state alternatives for liquid dye lasers, they recently gained a new dimension after the demonstration of organic semiconductor lasers in the 90's. More recently, new perspectives appeared at the nanoscale, with organic polariton and surface plasmon lasers. After a brief reminder to laser physics, a first chapter exposes what makes organic solid-state organic lasers specific. The laser architectures used in organic lasers are then reviewed, with a state-of-the-art review of the performances of devices with regard to output power, threshold, lifetime, beam quality etc. A survey of the recent trends in the field is given, highlighting the latest developments with a special focus on the challenges remaining for achieving direct electrical pumping of organic semiconductor lasers. A last chapter covers the applications of organic solid-state lasers.

  15. Laser Hazards Bibliography

    Science.gov (United States)

    1989-10-31

    light on mandibular fracture healing, Stomatologiia, 57(5): 5-9 (1978). 42 Laser Hazards Bibliography 177. Van Gemert, M.J.C., Schets, G.A.C.M., Bishop...U., Laser-coagulation of ruptured fixation suture after lens implantation, J Am Intraocul Implant Soc, 4(2): 54 (1978). 49. Federman, J. L., Ando, F...laser in pediatric surgery, J Ped Surg, 3: 263-270 (April 1968). 82. Hennessy, R. T., and Leibowitz, H., Subjective measurement of accommodation with

  16. Optimising laser tattoo removal

    Directory of Open Access Journals (Sweden)

    Kabir Sardana

    2015-01-01

    Full Text Available Lasers are the standard modality for tattoo removal. Though there are various factors that determine the results, we have divided them into three logical headings, laser dependant factors such as type of laser and beam modifications, tattoo dependent factors like size and depth, colour of pigment and lastly host dependent factors, which includes primarily the presence of a robust immune response. Modifications in the existing techniques may help in better clinical outcome with minimal risk of complications. This article provides an insight into some of these techniques along with a detailed account of the factors involved in tattoo removal.

  17. Ultrashort Laser Pulse Phenomena

    CERN Document Server

    Diels, Jean-Claude

    2006-01-01

    Ultrashort Laser Pulse Phenomena, 2e serves as an introduction to the phenomena of ultra short laser pulses and describes how this technology can be used to examine problems in areas such as electromagnetism, optics, and quantum mechanics. Ultrashort Laser Pulse Phenomena combines theoretical backgrounds and experimental techniques and will serve as a manual on designing and constructing femtosecond (""faster than electronics"") systems or experiments from scratch. Beyond the simple optical system, the various sources of ultrashort pulses are presented, again with emphasis on the basic

  18. Laser-driven accelerators

    International Nuclear Information System (INIS)

    Anon.

    1982-01-01

    Several devices for using laser fields have been proposed and they can be classified in three broad categories - 'far-field' accelerators (such as the principle of inverse free electron lasers), 'media' accelerators (which, for example, use the inverse Cherenkov effect or laser-controlled plasma waves), and 'near-field' accelerators (using a loaded guiding structure such as cavities or gratings). These different approaches come from the fact that a particle cannot be accelerated by the absorption of single photons (because of momentum conservation) and thus some other element has to intervene. (orig./HSI).

  19. Regenerative laser system

    International Nuclear Information System (INIS)

    Biancardi, F.R.; Landerman, A.; Melikian, G.

    1975-01-01

    Regenerative apparatus for exhausting the working medium from the optical cavity of a laser and for supplying preheated diluent to the reaction chamber of a laser is disclosed. In an aftercooler thermal energy is exchanged between the working medium exhausted from the optical cavity and a cryogenic coolant which is subsequently utilized as the motive fluid for an ejector and as a diluent in the production of laser gas. Highly toxic and corrosive gases are condensed out of the working medium as the cryogenic coolant is evaporated and superheated. A preheater transfers additional heat to the diluent before the diluent enters the reaction chamber. (U.S.)

  20. Tunable excimer lasers

    International Nuclear Information System (INIS)

    Sze, R.C.

    1990-01-01

    The wide bandwidth nature of the rare-gas halide excimer transitions allow reasonable tuning of the laser oscillation wavelength that makes it useful for a number of applications. At the same time this wide bandwidth makes narrow band operation difficult and special techniques are needed to insure narrow frequency lasing as well as absolute frequency resettability. The author discusses briefly some of the classical frequency narrowing techniques and then goes on to some recent work that require lasers of special frequency characteristics for special applications including KrF laser fusion

  1. Diatomic gasdynamic lasers.

    Science.gov (United States)

    Mckenzie, R. L.

    1972-01-01

    Predictions from a numerical model of the vibrational relaxation of anharmonic diatomic oscillators in supersonic expansions are used to show the extent to which the small anharmonicity of gases like CO can cause significant overpopulations of upper vibrational states. When mixtures of CO and N2 are considered, radiative gain on many of the vibration-rotation transitions of CO is predicted. Experiments are described that qualitatively verify the predictions by demonstrating laser oscillation in CO-N2 expansions. The resulting CO-N2 gasdynamic laser displays performance characteristics that equal or exceed those of similar CO2 lasers.

  2. Gas dynamic lasers

    International Nuclear Information System (INIS)

    Hill, R.J.; Jewell, N.T.

    1975-01-01

    In a high powered laser system it is proposed that combustion gases be bled off from a gas turbine engine and their composition adjusted by burning extra fuel in the bleed gases or adding extra substances. Suitable aerodynamic expansion produces a population inversion resulting in laser action in the CO 2 species. Alternatively, bleed gases may be taken from the high pressure compressor of the gas turbine engine and an appropriate fuel burned therein. If required, other adjustments may also be made to the composition and the resulting gaseous mixture subjected to aerodynamic expansion to induce laser action as before. (auth)

  3. Monoenergetic laser wakefield acceleration

    Directory of Open Access Journals (Sweden)

    N. E. Andreev

    2000-02-01

    Full Text Available Three dimensional test particle simulations are applied to optimization of the plasma-channeled laser wakefield accelerator (LWFA operating in a weakly nonlinear regime. Electron beam energy spread, emittance, and luminosity depend upon the proportion of the electron bunch size to the plasma wavelength. This proportion tends to improve with the laser wavelength increase. We simulate a prospective two-stage ∼1GeV LWFA with controlled energy spread and emittance. The input parameters correspond to realistic capabilities of the BNL Accelerator Test Facility that features a picosecond-terawatt CO_{2} laser and a high-brightness electron gun.

  4. Simulations of laser undulators

    Science.gov (United States)

    Milton, S. V.; Biedron, S. B.; Einstein, J. E.

    2016-09-01

    We perform a series of single-pass, one-D free-electron laser simulations based on an electron beam from a standard linear accelerator coupled with a so-called laser undulator, a specialized device that is more compact than a standard undulator based on magnetic materials. The longitudinal field profiles of such lasers undulators are intriguing as one must and can tailor the profile for the needs of creating the virtual undulator. We present and discuss several results of recent simulations and our future steps.

  5. Diatomic gasdynamic lasers

    International Nuclear Information System (INIS)

    McKenzie, R.L.

    1971-12-01

    Predictions from a numerical model of the vibrational relaxation of anharmonic diatomic oscillators in supersonic expansions are used to show the extent to which the small anharmonicity of gases like CO can cause significant over-populations of upper vibrational states. When mixtures of CO and N 2 are considered, radiative gain on many of the vibration-rotation transitions of CO is predicted. Experiments are described that qualitatively verify the predictions by demonstrating laser oscillation in CO-N 2 expansions. The resulting CO-N 2 gasdynamic laser displays performance characteristics that equal or exceed those of similar CO 2 lasers

  6. High power excimer laser

    International Nuclear Information System (INIS)

    Oesterlin, P.; Muckenheim, W.; Basting, D.

    1988-01-01

    Excimer lasers emitting more than 200 W output power are not commercially available. A significant increase requires new technological efforts with respect to both the gas circulation and the discharge system. The authors report how a research project has yielded a laser which emits 0.5 kW at 308 nm when being UV preionized and operated at a repetition rate of 300 Hz. The laser, which is capable of operating at 500 Hz, can be equipped with an x-ray preionization module. After completing this project 1 kW output power will be available

  7. Plasmonic colour laser printing

    DEFF Research Database (Denmark)

    Zhu, Xiaolong; Vannahme, Christoph; Højlund-Nielsen, Emil

    2016-01-01

    -beam lithography (EBL) or focused ion beam (FIB), both expensive and not scalable processes that are not suitable for post-processing customization. Here we show a method of colour printing on nanoimprinted plasmonic metasurfaces using laser post-writing. Laser pulses induce transient local heat generation...... that leads to melting and reshaping of the imprinted nanostructures. Depending on the laser pulse energy density, different surface morphologies that support different plasmonic resonances leading to different colour appearances can be created. Using this technique we can print all primary colours...

  8. Optimising Laser Tattoo Removal

    Science.gov (United States)

    Sardana, Kabir; Ranjan, Rashmi; Ghunawat, Sneha

    2015-01-01

    Lasers are the standard modality for tattoo removal. Though there are various factors that determine the results, we have divided them into three logical headings, laser dependant factors such as type of laser and beam modifications, tattoo dependent factors like size and depth, colour of pigment and lastly host dependent factors, which includes primarily the presence of a robust immune response. Modifications in the existing techniques may help in better clinical outcome with minimal risk of complications. This article provides an insight into some of these techniques along with a detailed account of the factors involved in tattoo removal. PMID:25949018

  9. Laser welding engineering

    International Nuclear Information System (INIS)

    Bhieh, N. M.; El Eesawi, M. E.; Hashkel, A. E.

    2007-01-01

    Laser welding was in its early life used mainly for unusual applications where no other welding process would be suitable that was twenty five years ago. Today, laser welding is a fully developed part of the metal working industry, routinely producing welds for common items such as cigarette lighters, which springs, motor/transformer lamination, hermetic seals, battery and pacemaker cans and hybrid circuit packages. Yet very few manufacturing engineering have seriously considers employing lasers in their own operations. Why? There are many reasons, but a main one must be not acquainted with the operation and capabilities of a laser system. Other reasons, such as a relatively high initial cost and a concern about using lasers in the manufacturing environment, also are frequently cited, and the complexity of the component and flexibility of the light delivery system. Laser welding could be used in place of many different standard processes, such as resistance (spot or seam), submerged arc, RF induction, high-frequency resistance, ultrasonic and electronic and electron-beam. while each of these techniques has established an independent function in the manufacturing world, the flexible laser welding approach will operate efficiently and economically in many different applications. Its flexibility will even permit the welding system to be used for other machining function, such as drilling, scribing, sealing and serializing. In this article, we will look at how laser welding works and what benefits it can offer to manufacturing engineers. Some industry observers state that there are already 2,000 laser machine tools being used for cutting, welding and drilling and that the number could reach 30,000 over the next 15 years as manufacturing engineers become more aware of the capabilities of lasers [1). While most laser applications are dedicated to one product or process that involves high-volume, long-run manufacturing, the flexibility of a laser to supply energy to hard

  10. Laser Megajoule synchronization system

    International Nuclear Information System (INIS)

    Luttmann, M.; Pastor, J.F; Drouet, V.; Prat, M.; Raimbourg, J.; Adolf, A.

    2011-01-01

    This paper describes the synchronisation system under development on the Laser Megajoule (LMJ) in order to synchronize the laser quads on the target to better than 40 ps rms. Our architecture is based on a Timing System (TS) which delivers trigger signals with jitter down to 15 ps rms coupled with an ultra precision timing system with 5 ps rms jitter. In addition to TS, a sensor placed at the target chamber center measures the arrival times of the 3 omega nano joule laser pulses generated by front end shots. (authors)

  11. Dos Males da Medida

    Directory of Open Access Journals (Sweden)

    Lilia Moritz Schwarcz

    1997-01-01

    Full Text Available Esse artigo tem como objeto a difícil percepção da "diferença". Tema polêmico, o debate sobre as variedades culturais foi transformado, em meados do século XIX, em uma questão racial e, nesse sentido, vinculado às regularidades da biologia. Tecendo comparações entre os teóricos raciais brasileiros e os impasses mais contemporâneos, sobre a aferição de inteligência e capacidade, esse ensaio pretende provocar. Em pauta estarão as contradições que têm se destacado, mais recentemente, quando se opõem de um lado as etnicidades locais, de outro a tão propalada globalização. Tal qual dois lados de uma mesma moeda, a afirmação de identidades tem se mostrado tão evidente como o próprio estreitamento das relações internacionais. Mudam os termos do debate - de raça, para etnia -, mas, de alguma maneira, continuamos presos a uma lógica positiva de estabelecimento de hierarquias ontológicas.This article has as its objective the difficult perception of "difference". A controversial theme, in the nineteenth century, this debate on cultural varieties, became a racial issue and in this sense, bonded to the regularities of biology. In such a context, this essay intends to provoke comparisons about the standard measure of intelligence and capacity, between Brazilian racial theorists and the impasse of more contemporary times. Appointed here will be the contradictions which have, more recently grown in importance, and have opposed through one aspect, local ethnic groups and through another the greatly publicized globalization. As are the two sides of a coin, the affirmation of identities has shown itself as evident as the tightening of international relations. The terms of the debate change from race to ethnicism, but in some way, we are still tied to a positivist logic which establishes ontologic hierarchies.

  12. SOBRE OS FUNDAMENTOS DA ARQUITETURA DA INFORMAÇÃO

    Directory of Open Access Journals (Sweden)

    Alfram Roberto Rodrigues de Albuquerque

    2011-10-01

    Full Text Available Expõe-se o estado atual da disciplina Arquitetura da Informação quanto a problemática terminológica da definição do campo de estudo, apresentando-se argumentos para uma definição de Arquitetura da Informação de uma forma ampla na qual os usos correntes dessa expressão sejam vistos como especializações. Defende-se uma definição com a utilização de um conjunto de propriedades mínimas cujas interações levam a uma terminologia formal e cuja abstração leva a uma definição formal do conceito que emprega a linguagem de morfismos da Teoria das Categorias. Trata-se de um recorte de alguns dos resultados obtidos na tese de doutoramento de um dos autores, defendida em setembro de 2010. O contexto da pesquisa é exposto e alguns dos resultados obtidos são delineados.

  13. O sentido da espiritualidade na transitoriedade da vida

    Directory of Open Access Journals (Sweden)

    Isabel Cristina de Oliveira Arrieira

    Full Text Available Resumo Objetivo: Compreender o sentido da espiritualidade para a pessoa em cuidados paliativos. Métodos: Abordagem qualitativa, fundamentada na fenomenologia existencialista e referencial de Viktor Frankl. Os participantes foram nove pessoas em cuidados paliativos atendidas no domicílio. Informações coletadas por meio da observação e de entrevista realizadas no período de junho a outubro de 2014, gravadas, transcritas e transformadas em texto interpretado com a abordagem fenomenológica hermenêutica. Resultados: Surgiram as seguintes categorias: sentido de continuidade da vida; sentido de alívio do sofrimento; sentido de naturalidade da morte e sentido de valorização do viver. Conclusão: Para a integralidade da atenção faz-se necessário a inclusão da espiritualidade na prática do cuidado em saúde. A espiritualidade proporciona o encontro existencial entre a pessoa em cuidados paliativos e os profissionais que a cuidam em sua integralidade.

  14. O uso da aromaterapia na melhora da autoestima

    Directory of Open Access Journals (Sweden)

    Juliana Rizzo Gnatta

    2011-10-01

    Full Text Available Os objetivos deste estudo foram verificar se a inalação dos óleos essenciais de rosa e de ylang-ylang alteram a percepção da autoestima e comparar a eficácia dos mesmos. O projeto foi aprovado pelo Comitê de Ética em Pesquisa do Hospital da Universidade de São Paulo. Participaram 43 funcionários dos setores de Higienização e da Central de Materiais e Esterilização durante os meses de maio a julho de 2009. Os sujeitos foram randomizados em três grupos: dois que receberem os óleos essenciais e outro que recebeu placebo (essência de rosa. A avaliação da autoestima foi feita através de uma escala já validada no Brasil, sendo aplicada antes do uso dos aromas, depois de 30 dias de uso e ao completar 60 dias. Dentre os resultados, verificou-se que a amostra era constituída por 88,6% de indivíduos com média e alta autoestima e que os óleos essenciais em questão não alteraram de forma significativa a percepção da autoestima.

  15. Laser applications in neurosurgery

    Science.gov (United States)

    Cerullo, Leonard J.

    1985-09-01

    The "false start" of the laser in neurosurgery should not be misconstrued as a denial of the inherent advantages of precision and gentleness in dealing with neural tissue. Rather, early investigators were frustrated by unrealistic expectations, cumbersome equipment, and a general ignorance of microtechnique. By the early 70s, microneurosurgery was well established, surgical laser equipment for free hand and microlinked application had been developed, and a more realistic view of the limitations of the laser had been established. Consequently, the late 70s really heralded the renaissance of the laser in neurosurgery. Since then, there has been an overwhelming acceptance of the tool in a variety of clinical situations, broadly categorized in five groups. 1)|Perhaps the most generally accepted area is in the removal of extra-axial tumors of the brain and spinal cord. These tumors, benign by histology but treacherous by location, do not present until a significant amount of neurological compensation has already occurred. The application of additional trauma to the neural tissue, whether by further tumor growth or surgical manipulation, frequently results in irreversible damage. Here, the ability of the laser to vaporize tissue, in a fairly hemostatic fashion, without mechanical or thermal damage to sensitive surrounding tissues, is essential. 2)|The ability to incise delicate neural tissue with minimal spread of thermal destruction to adjacent functioning tissue makes the laser the ideal instrument when tumors deep under the surface are encountered in the brain or spinal cord. Thus, the second group of applications is in the transgression of normal neural structures to arrive at deeper pathological tissue. 3)|The third area of benefit for the laser in neurosurgery has been in the performance of neuroablative procedures, calling for deliberate destruction of functioning neural tissue in a controlled fashion. Again, the precision and shape confinement of the destructive

  16. Laser tests of silicon detectors

    International Nuclear Information System (INIS)

    Dolezal, Zdenek; Escobar, Carlos; Gadomski, Szymon; Garcia, Carmen; Gonzalez, Sergio; Kodys, Peter; Kubik, Petr; Lacasta, Carlos; Marti, Salvador; Mitsou, Vasiliki A.; Moorhead, Gareth F.; Phillips, Peter W.; Reznicek, Pavel; Slavik, Radan

    2007-01-01

    This paper collects experiences from the development of a silicon sensor laser testing setup and from tests of silicon strip modules (ATLAS End-cap SCT), pixel modules (DEPFET) and large-area diodes using semiconductor lasers. Lasers of 1060 and 680 nm wavelengths were used. A sophisticated method of focusing the laser was developed. Timing and interstrip properties of modules were measured. Analysis of optical effects involved and detailed discussion about the usability of laser testing for particle detectors are presented

  17. A utilização da teoria da aprendizagem significativa no ensino da Enfermagem

    Directory of Open Access Journals (Sweden)

    Alana Tamar Oliveira de Sousa

    2015-08-01

    Full Text Available RESUMOObjetivo:sintetizar a produção científica acerca da Teoria da Aprendizagem Significativa no processo de ensino-aprendizagem em Enfermagem.Método:revisão integrativa realizada nas bases de dados MEDLINE, LILACS, SciELO, BDENF e CINAHL, com artigos que abordaram a temática ou aspectos da teoria da aprendizagem significativa de David Ausubel. Fizeram parte da amostra dez artigos, sendo seis escritos no idioma português e quatro no inglês, publicados de 1998 a 2013.Resultados:cinco artigos fizeram alusão à Teoria da Aprendizagem Significativa, quatro citaram Ausubel como autor dessa teoria e apenas dois seguiram a estrutura para a aplicação da teoria completamente. Há escassez de estudos sobre o tema e os que o abordam não o correlacionam com a teoria de Ausubel.Conclusão:faz-se necessário romper com a dicotomia entre teoria e prática e promover a articulação dos conteúdos com a ação, introduzindo o aluno como autor de seu próprio conhecimento.

  18. Multispot fiber laser welding

    DEFF Research Database (Denmark)

    Schutt Hansen, Klaus

    This dissertation presents work and results achieved in the field of multi beam fiber laser welding. The project has had a practical approach, in which simulations and modelling have been kept at a minimum. Different methods to produce spot patterns with high power single mode fiber lasers have...... been examined and evaluated. It is found that both diamond turned DOE’s in zinc sulphide and multilevel etched DOE’s (Diffractive Optical Elements) in fused silica have a good performance. Welding with multiple beams in a butt joint configuration has been tested. Results are presented, showing it has...... been possible to control the welding width in incremental steps by adding more beams in a row. The laser power was used to independently control the keyhole and consequently the depth of fusion. An example of inline repair of a laser weld in butt joint configuration was examined. Zinc powder was placed...

  19. Lasers and holography

    CERN Document Server

    Kock, Winston E

    1981-01-01

    Accessible, illustrated introduction covers wave patterns and coherence, summarizes the development of lasers and the phenomenon of wave diffraction, and describes zone plates and properties of holograms. 1981 edition.

  20. Jupiter Laser Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Jupiter Laser Facility is an institutional user facility in the Physical and Life Sciences Directorate at LLNL. The facility is designed to provide a high degree...

  1. Blackbody metamaterial lasers

    KAUST Repository

    Liu, Changxu

    2015-01-01

    We investigate both theoretically and experimentally a new type of laser, which exploits a broadband light "condensation" process sustained by the stimulated amplification of an optical blackbody metamaterial. © 2014 Optical Society of America.

  2. Electra Laser Facility

    Data.gov (United States)

    Federal Laboratory Consortium — FUNCTION: The Electra Laser Facility is used to develop the science and technology needed to develop a reliable, efficient, high-energy, repetitively pulsed krypton...

  3. Airclad fiber laser technology

    DEFF Research Database (Denmark)

    Hansen, Kim P.; Olausson, Christina Bjarnal Thulin; Broeng, Jes

    2011-01-01

    High-power fiber lasers and amplifiers have gained tremendous momentum in the last 5 years. Many of the traditional manufacturers of gas and solid-state lasers are now pursuing the fiber-based systems, which are displacing the conventional technology in many areas. High-power fiber laser systems...... require reliable fibers with large cores, stable mode quality, and good power handling capabilities-requirements that are all met by the airclad fiber technology. In the present paper we go through many of the building blocks needed to build high-power systems and we show an example of a complete airclad...... laser system. We present the latest advancements within airclad fiber technology including a new 100 m single-mode polarization-maintaining rod-type fiber capable of amplifying to megawatt power levels. Furthermore, we describe the novel airclad-based pump combiners and their use in a completely...

  4. Laser fusion overview

    International Nuclear Information System (INIS)

    Nuckolls, J.

    1976-01-01

    Because of recent breakthroughs in the target area, and in the glass laser area, the scientific feasibility of laser fusion--and of inertial fusion--may be demonstrated in the early 1980's. Then the development in that time period of a suitable laser (or storage ring or other driving source) would make possible an operational inertial fusion reactor in this century. These are roughly the same time scales as projected by the Tokamak magnetic confinement approach. It thus appears that the 15-20 year earlier start by magnetic confinement fusion may be overcome. Because inertial confinement has been demonstrated, and inertial fusion reactors may operate on smaller scales than Tokamaks, laser fusion may have important technical and economic advantages

  5. Laser therapy for periodontitis

    Science.gov (United States)

    Efanov, O. I.

    2001-04-01

    An investigation was made of applying pulsed (lambda) equals 0.89 micrometers laser radiation in the treatment for early diagnosed periodontitis. The investigation was made on 65 patients (47 patients constituted the experimental group and 18 patients constituted a control group) affected by periodontitis. Clinical and functional tests revealed that laser therapy produced a string effect on the course of the illness. It reduced bleeding, inflammation, and pruritus. However, it did not produce an affect on electroexcitation. Biomicroscopic examinations and periodontium rheography revealed that the gingival blood flow became normal after the course of laser therapy. The capillary permeability and venous congestion decreased, which was confirmed by the increased time of vacuum tests, raised gingival temperature, reduced tissue clearance, and increased oxygen tension. Apart from that, laser therapy subsided fibrinolysis, proteolytic tissue activity, and decreased the exudative inflammation of periodontium.

  6. Laser Guidance Analysis Facility

    Data.gov (United States)

    Federal Laboratory Consortium — This facility, which provides for real time, closed loop evaluation of semi-active laser guidance hardware, has and continues to be instrumental in the development...

  7. Airclad fiber laser technology

    DEFF Research Database (Denmark)

    Hansen, Kim P.; Olausson, Christina Bjarnal Thulin; Broeng, Jes

    2008-01-01

    High-power fiber lasers and amplifiers have gained tremendous momentum in the last five years, and many of the traditional manufactures of gas and solid-state lasers are pursuing the attractive fiber-based systems, which are now displacing the old technology in many areas. High-power fiber laser...... systems require specially designed fibers with large cores and good power handling capabilities - requirements that are all met by the airclad fiber technology. In the present paper we go through many of the building blocks needed to build high-power systems and we show an example of a complete airclad...... laser system. We present the latest advancements within airclad fiber technology including a new 70 μm single-mode polarization-maintaining rod-type fiber capable of amplifying to MW power levels. Furthermore we describe the novel airclad based pump combiners and their use in a completely monolithic 350...

  8. Improved Laser Vibration Radar

    National Research Council Canada - National Science Library

    Hilaire, Pierre

    1998-01-01

    .... This thesis reconfigured an existing CO2 laboratory laser radar system that is capable of measuring the frequencies of vibration of a simulated target into a more compact and rugged form for field testing...

  9. Physics of laser plasma

    International Nuclear Information System (INIS)

    Rubenchik, A.; Witkowski, S.

    1991-01-01

    This book provides a comprehensive review of laser fusion plasma physics and contains the most up-to-date information on high density plasma physics and radiation transport, useful for astrophysicists and high density physicists

  10. Fusion reactor pumped laser

    International Nuclear Information System (INIS)

    Jassby, D.L.

    1988-01-01

    A nuclear pumped laser is described comprising: a toroidal fusion reactor, the reactor generating energetic neutrons; an annular gas cell disposed around the outer periphery of the reactor, the cell including an annular reflecting mirror disposed at the bottom of the cell and an annular output window disposed at the top of the cell; a gas lasing medium disposed within the annular cell for generating output laser radiation; neutron reflector material means disposed around the annular cell for reflecting neutrons incident thereon back into the gas cell; neutron moderator material means disposed between the reactor and the gas cell and between the gas cell and the neutron reflector material for moderating the energy of energetic neutrons from the reactor; converting means for converting energy from the moderated neutrons to energy pumping means for pumping the gas lasing medium; and beam compactor means for receiving output laser radiation from the annular output window and generating a single output laser beam therefrom

  11. Compact semiconductor lasers

    CERN Document Server

    Yu, Siyuan; Lourtioz, Jean-Michel

    2014-01-01

    This book brings together in a single volume a unique contribution by the top experts around the world in the field of compact semiconductor lasers to provide a comprehensive description and analysis of the current status as well as future directions in the field of micro- and nano-scale semiconductor lasers. It is organized according to the various forms of micro- or nano-laser cavity configurations with each chapter discussing key technical issues, including semiconductor carrier recombination processes and optical gain dynamics, photonic confinement behavior and output coupling mechanisms, carrier transport considerations relevant to the injection process, and emission mode control. Required reading for those working in and researching the area of semiconductors lasers and micro-electronics.

  12. YAG Laser or bur

    African Journals Online (AJOL)

    2018-02-23

    Feb 23, 2018 ... for the clinical durability of resin-based dental restorations.[1]. Microleakage ... studies evaluating the use of laser systems in primary teeth for cavity ... sealed with glass ionomer restorative material (Fuji. II LC, GC Corporation ...

  13. Foundations of laser spectroscopy

    CERN Document Server

    Stenholm, Stig

    2005-01-01

    A simple presentation of the theoretical foundations of steady-state laser spectroscopy, this text helps students to apply theory to calculations with a systematic series of examples and exercises. 1984 edition.

  14. Thermonuclear fusion by laser

    International Nuclear Information System (INIS)

    Delpech, J.-F.; Fabre, Edouard.

    1978-01-01

    This paper is intended to describe the principle of inetia containment by laser and the research effort undertaken for this purpose. After having enumerated the principal thermonuclear reactions useful for fusion, the authors derive the rhoR criterion that characterizes inertia containment, as well as the Lawson criterion in the case of magnetic containment. The main physics problems involved in inertia containment by laser are enunciated and the article ends with a review of means resorted to in France and abroad for studying this problem. This review also reports C.N.R.S. bustling in this field, within the scope of competence of G.I.L.M. (Groupement de Recherches Coordonnees sur l'Interaction Laser-Matiere = Group for coordinated investigation of matter-laser interaction) established in Paris at the Ecole Polytechnique [fr

  15. DIFFRACTION SYNCHRONIZATION OF LASERS,

    Science.gov (United States)

    semiconductor lasers while suppressing parasitic generation in the plane of the mirror. The diffraction coupling coefficient of open resonators is calculated, and the stability conditions of the synchronized system is determined.

  16. Da janela do meu quarto

    Directory of Open Access Journals (Sweden)

    Esther Hamburger

    2008-12-01

    Full Text Available O texto aborda o curta Da Janela do Meu Quarto de Cao Guimarães como contraponto a filmes brasileiros recentes que lidam com a desigualdade social brasileira na chave da violência. O texto contrasta o distanciamento imposto pelo posicionamento de câmera e efeitos de montagem e som nesse filme, com o uso de estratégias de pertencimento e apropriação presentes em filmes "de resultado".

  17. Da janela do meu quarto

    OpenAIRE

    Hamburger, Esther

    2008-01-01

    O texto aborda o curta Da Janela do Meu Quarto de Cao Guimarães como contraponto a filmes brasileiros recentes que lidam com a desigualdade social brasileira na chave da violência. O texto contrasta o distanciamento imposto pelo posicionamento de câmera e efeitos de montagem e som nesse filme, com o uso de estratégias de pertencimento e apropriação presentes em filmes "de resultado".

  18. Efficiencies of laser dyes for atomic vapor laser isotope separation

    International Nuclear Information System (INIS)

    Maeda, Mitsuo; Oki, Yuji; Uchiumi, Michihiro; Takao, Takayuki; Igarashi, Kaoru; Shimamoto, Kojiro.

    1995-01-01

    Efficiencies of 30 laser dyes for the atomic vapor laser isotope separation (AVLIS) are experimentally evaluated with a dye laser pumped by a frequency-doubled Nd:YAG laser. On the other hand, a simulation code is developed to describe the laser action of Rhodamine 6G, and the dependence of the laser efficiency on the pump wavelength is calculated. Following conclusions are obtained by these considerations:space: 1) Pyrromethene 567 showed 16% higher laser efficiency than Rhodamine 6G by 532 nm pumping, and Pyrromethene 556 has an ability to provide better efficiency by green light pumping with a Cu vapor laser; 2) Kiton red 620 and Rhodamine 640, whose efficiencies were almost the same as Rhodamine 6G by 532 nm pumping, will show better efficiencies by two-wavelength pumping with a Cu vapor laser. (author)

  19. Future prospects of laser diodes and fiber lasers

    International Nuclear Information System (INIS)

    Ueda, Ken-ichi

    2000-01-01

    For the next century we should develop new concepts for coherent control of light generation and propagation. Owing to the recent development of ultra fine structures in semiconductor lasers, fiber lasers, and various kinds of waveguide structure, we can make optical devices which control the light propagation artificially. But, the phase locking and phase control of multiple laser oscillators are one of the most important directions of laser science and technology. The coherent summation has been a dream of laser since 1960. Is it possible to solve this old and quite challenging problem for laser science? This is also a very basic concept because the laser action based on the stimulated emission is the process of coherent summation of huge number of photons emitted from individual atoms. In this paper, I discuss the fundamental direction of laser research in the next ten or twenty years. The active optics and laser technology should be combined intrinsically in near future. (author)

  20. High-energy molecular lasers self-controlled volume-discharge lasers and applications

    CERN Document Server

    Apollonov, V V

    2016-01-01

    This book displays the physics and design of high-power molecular lasers. The lasers described are self-controlled volume-discharge lasers. The book explains self-sustained discharge lasers, self-initiated discharge lasers and technical approaches to laser design. Important topics discussed are laser efficiency, laser beam quality and electric field homogeneity. The book contains many new innovative applications.

  1. Transurethral vaporesection of prostate: diode laser or thulium laser?

    Science.gov (United States)

    Tan, Xinji; Zhang, Xiaobo; Li, Dongjie; Chen, Xiong; Dai, Yuanqing; Gu, Jie; Chen, Mingquan; Hu, Sheng; Bai, Yao; Ning, Yu

    2018-05-01

    This study compared the safety and effectiveness of the diode laser and thulium laser during prostate transurethral vaporesection for treating benign prostate hyperplasia (BPH). We retrospectively analyzed 205 patients with BPH who underwent a diode laser or thulium laser technique for prostate transurethral vaporesection from June 2016 to June 2017 and who were followed up for 3 months. Baseline characteristics of the patients, perioperative data, postoperative outcomes, and complications were compared. We also assessed the International Prostate Symptom Score (IPSS), quality of life (QoL), maximum flow rate (Q max ), average flow rate (AFR), and postvoid residual volume (PVR) at 1 and 3 months postoperatively to evaluate the functional improvement of each group. There were no significant differences between the diode laser and thulium laser groups related to age, prostate volume, operative time, postoperative hospital stays, hospitalization costs, or perioperative data. The catheterization time was 3.5 ± 0.8 days for the diode laser group and 4.7 ± 1.8 days for the thulium laser group (p diode laser and thulium laser contributes to safe, effective transurethral vaporesection in patients with symptomatic BPH. Diode laser, however, is better than thulium laser for prostate transurethral vaporesection because of its shorter catheterization time. The choice of surgical approach is more important than the choice of laser types during clinical decision making for transurethral laser prostatectomy.

  2. Pulsed chemical laser

    International Nuclear Information System (INIS)

    Jacobson, T.V.; Kimbell, G.H.

    1975-01-01

    A hydrogen fluoride laser capable of operating super radiantly and at atmospheric pressure is described. A transverse electrical discharge is utilized to energize the reaction of a hydrogen donor to provide hydrogen fluoride in a metastable energy state which reverts to a stable state by laser action. A large range of hydrogen and fluorine donors is disclosed. A preferred pair of donors is sulphur hexafluoride and propane. Helium is frequently added to the gas mix to act as a buffer. (U.S.)

  3. Hybrid vertical cavity laser

    DEFF Research Database (Denmark)

    Chung, Il-Sug; Mørk, Jesper

    2010-01-01

    A new hybrid vertical cavity laser structure for silicon photonics is suggested and numerically investigated. It incorporates a silicon subwavelength grating as a mirror and a lateral output coupler to a silicon ridge waveguide.......A new hybrid vertical cavity laser structure for silicon photonics is suggested and numerically investigated. It incorporates a silicon subwavelength grating as a mirror and a lateral output coupler to a silicon ridge waveguide....

  4. Laser Resurfacing Pearls

    OpenAIRE

    Shah, Sonia; Alam, Murad

    2012-01-01

    Ablative skin resurfacing using the carbon dioxide laser was long considered the gold standard for treatment of photoaging, acne scars, and rhytids. However, conventional full-face carbon dioxide resurfacing is associated with significant risk of side effects and a prolonged postoperative recovery period. Fractional resurfacing has recently revolutionized laser surgery by offering close to comparable results with minimal side effects and a more rapid recovery. Although fractional devices have...

  5. Laser cooling of solids

    Energy Technology Data Exchange (ETDEWEB)

    Epstein, Richard I [Los Alamos National Laboratory; Sheik-bahae, Mansoor [UNM

    2008-01-01

    We present an overview of solid-state optical refrigeration also known as laser cooling in solids by fluorescence upconversion. The idea of cooling a solid-state optical material by simply shining a laser beam onto it may sound counter intuitive but is rapidly becoming a promising technology for future cryocooler. We chart the evolution of this science in rare-earth doped solids and semiconductors.

  6. Laser radiation protection

    International Nuclear Information System (INIS)

    Pantelic, D.; Muric, B.; Vasiljevic, D.

    2011-01-01

    We have presented the effects of laser radiation on human organism, with special emphasize on eye as the most sensitive organ. It was pointed-out that there are many parameters that should be taken into account when determining the level of protection from laser light. In that respect it is important to be aware of international standards that regulate this area. In addition, we have described a new material which efficiently protects human eye, by formation of microlens and carbonization. [sr

  7. SHIVA laser: nearing completion

    International Nuclear Information System (INIS)

    Glaze, J.A.; Godwin, R.O.

    1977-01-01

    Construction of the Shiva laser system is nearing completion. This laser will be operating in fall 1977 and will produce over 20 terawatts of focusable power in a subnanosecond pulse. Fusion experiments will begin early in 1978. It is anticipated that thermonuclear energy release equal to one percent that of the incident light energy will be achieved with sub-millimeter deuterium-tritium targets. From other experiments densities in excess of a thousand times that of liquid are also expected

  8. Laser Scanning in Forests

    Directory of Open Access Journals (Sweden)

    Håkan Olsson

    2012-09-01

    Full Text Available The introduction of Airborne Laser Scanning (ALS to forests has been revolutionary during the last decade. This development was facilitated by combining earlier ranging lidar discoveries [1–5], with experience obtained from full-waveform ranging radar [6,7] to new airborne laser scanning systems which had components such as a GNSS receiver (Global Navigation Satellite System, IMU (Inertial Measurement Unit and a scanning mechanism. Since the first commercial ALS in 1994, new ALS-based forest inventory approaches have been reported feasible for operational activities [8–12]. ALS is currently operationally applied for stand level forest inventories, for example, in Nordic countries. In Finland alone, the adoption of ALS for forest data collection has led to an annual savings of around 20 M€/year, and the work is mainly done by companies instead of governmental organizations. In spite of the long implementation times and there being a limited tradition of making changes in the forest sector, laser scanning was commercially and operationally applied after about only one decade of research. When analyzing high-ranked journal papers from ISI Web of Science, the topic of laser scanning of forests has been the driving force for the whole laser scanning research society over the last decade. Thus, the topic “laser scanning in forests” has provided a significant industrial, societal and scientific impact. [...

  9. CO2 laser cutting

    CERN Document Server

    Powell, John

    1998-01-01

    The laser has given manufacturing industry a new tool. When the laser beam is focused it can generate one of the world's most intense energy sources, more intense than flames and arcs, though similar to an electron beam. In fact the intensity is such that it can vaporise most known materials. The laser material processing industry has been growing swiftly as the quality, speed and new manufacturing possibilities become better understood. In the fore of these new technologies is the process of laser cutting. Laser cutting leads because it is a direct process substitu­ tion and the laser can usually do the job with greater flexibility, speed and quality than its competitors. However, to achieve these high speeds with high quality con­ siderable know how and experience is required. This information is usually carefully guarded by the businesses concerned and has to be gained by hard experience and technical understanding. Yet in this book John Powell explains in lucid and almost non­ technical language many o...

  10. Reverse spontaneous laser line sweeping in ytterbium fiber laser

    Czech Academy of Sciences Publication Activity Database

    Navrátil, Petr; Peterka, Pavel; Honzátko, Pavel; Kubeček, V.

    2017-01-01

    Roč. 14, č. 3 (2017), č. článku 035102. ISSN 1612-2011 R&D Projects: GA ČR(CZ) GA16-13306S Institutional support: RVO:67985882 ; RVO:68378271 Keywords : laser line sweeping * ytterbium * fiber lasers Subject RIV: BH - Optics, Masers, Lasers; BH - Optics, Masers, Lasers (FZU-D) OBOR OECD: Optics (including laser optics and quantum optics); Optics (including laser optics and quantum optics) (FZU-D) Impact factor: 2.537, year: 2016

  11. GRAU DA PRÁXIS DA GESTÃO DA RESPONSABILIDADE AMBIENTAL PRATICADA POR USINAS SUCROALCOOLEIRAS

    Directory of Open Access Journals (Sweden)

    Renata Longo

    2014-12-01

    gerencial (PCDA foi o Action que apresentou maior grau de aderência. Há uma concordância acentuada às características fundamentais do ciclo gerencial na Gestão da Responsabilidade Socioambiental.

  12. Laser Diode Pumped Solid State Lasers

    Science.gov (United States)

    1987-01-01

    Report N66001-83-C-0071, 17 April 1986, prepared for NOSC. 4.6 W.T. Welford, R. Winston , "The Option of Nonimaging Concentrators ," Academic Press, 1978...by non-imac optics such as reflective or refractive flux concentrators . Simple considerations regarding the optimum pumping configuration, high marks...reduced if the arrays can stand-off from the Nd:YAG laser. As mentioned before, compound parabolic concentrators or refractive optics cat employed to

  13. Greco Laser-matter interaction

    International Nuclear Information System (INIS)

    1986-01-01

    Research program in 1985 at GRECO ILM (Group of Coordinated Research: Interaction Laser Matter) continued with its principal direction in fundamental physics of laser inertial confinement; also researches on X-ray lasers hare been undergone and new high power laser application fields with particle acceleration, material processing and X-ray sources. A six beam laser was operated. Wavelength effects were studied. Atomic physics was deeply stressed as dense medium diagnostics from multicharged ions. Research development in ultra-dense medium was also important X-ray laser research gave outstanding results. New research fields were developed this year: laser acceleration of particles by wave beating or Raman instability; dense laser produced plasma use as X-ray source; material processing by laser shocks [fr

  14. Ultracompact Pseudowedge Plasmonic Lasers and Laser Arrays.

    Science.gov (United States)

    Chou, Yu-Hsun; Hong, Kuo-Bin; Chang, Chun-Tse; Chang, Tsu-Chi; Huang, Zhen-Ting; Cheng, Pi-Ju; Yang, Jhen-Hong; Lin, Meng-Hsien; Lin, Tzy-Rong; Chen, Kuo-Ping; Gwo, Shangjr; Lu, Tien-Chang

    2018-02-14

    Concentrating light at the deep subwavelength scale by utilizing plasmonic effects has been reported in various optoelectronic devices with intriguing phenomena and functionality. Plasmonic waveguides with a planar structure exhibit a two-dimensional degree of freedom for the surface plasmon; the degree of freedom can be further reduced by utilizing metallic nanostructures or nanoparticles for surface plasmon resonance. Reduction leads to different lightwave confinement capabilities, which can be utilized to construct plasmonic nanolaser cavities. However, most theoretical and experimental research efforts have focused on planar surface plasmon polariton (SPP) nanolasers. In this study, we combined nanometallic structures intersecting with ZnO nanowires and realized the first laser emission based on pseudowedge SPP waveguides. Relative to current plasmonic nanolasers, the pseudowedge plasmonic lasers reported in our study exhibit extremely small mode volumes, high group indices, high spontaneous emission factors, and high Purell factors beneficial for the strong interaction between light and matter. Furthermore, we demonstrated that compact plasmonic laser arrays can be constructed, which could benefit integrated plasmonic circuits.

  15. Lasers in endodontics: an overview

    Science.gov (United States)

    Frentzen, Matthias; Braun, Andreas; Koort, Hans J.

    2002-06-01

    The interest in endodontic use of dental laser systems is increasing. Developing laser technology and a better understanding of laser effects widened the spectrum of possible endodontic indications. Various laser systems including excimer-, argon+-, diode-, Nd:YAG-, Er:YAG- and CO2-lasers are used in pulp diagnosis, treatment of hypersensitivity, pulp capping, sterilization of root canals, root canal shaping and obturation or apicoectomy. With the development of new delivery systems - thin and flexible fibers - for many different wavelengths laser applications in endodontics may increase. Since laser devices are still relatively costly, access to them is limited. Most of the clinical applications are laser assisted procedures such as the removing of pulp remnants and debris or disinfection of infected root canals. The essential question is whether a laser can provide improved treatment over conventional care. To perform laser therapy in endodontics today different laser types with adopted wavelengths and pulse widths are needed, each specific to a particular application. Looking into the future we will need endodontic laser equipment providing optimal laser parameters for different treatment modalities. Nevertheless, the quantity of research reports from the last decade promises a genuine future for lasers in endodontics.

  16. Papel da vitamina B12 na patogenia da mielose funicular

    Directory of Open Access Journals (Sweden)

    Horacio M. Canelas

    1965-12-01

    Full Text Available Foi estudada a absorção da vitamina B12 radioativa em 29 casos de mielose funicular. O diagnóstico baseou-se na clássica sintomatologia neu- rológica e na presença de acloridria gástrica e eventuais alterações hemato-lógicas. As manifestações neurológicas foram avaliadas de modo semiquan-titativo e correlacionadas com os resultados do teste de excreção urinária da vitamina B12. Não foi verificada correlação significante da absorção da vitamina B12, quer com a sintomatologia nuerológica total, quer com as síndromes periférica e funicular dorsal. Contudo, foi encontrada significante correlação negativa entre a síndrome piramidal e a absorção da vitamina B12. Os resultados são confrontados com o papel desempenhado pela vitamina B12 na síntese das bainhas de mielina e do ácido ribonuclêico, sendo salientada a importância dêste último para a vida das células nervosas e dos longos axônios.

  17. Development of frequency tunable Ti:sapphire laser and dye laser pumped by a pulsed Nd:YAG laser

    International Nuclear Information System (INIS)

    Yi, Jong Hoon; Horn, Roland; Wendt, K.

    2001-01-01

    We investigated lasing characteristics of two kinds of tunable laser, liquid dye laser and solid Ti:sapphire crystal laser, pumped by high pulse repetition rate Nd:YAG laser. Dye laser showed drastically reduced pulsewidth compared with that of pump laser and it also contained large amount of amplified spontaneous emission. Ti:sapphire laser showed also reduced pulsewidth. But, the laser conversion pump laser and Ti:sapphire laser pulse, we used a Brewster-cut Pockel's cell for Q-switching. The laser was frequency doubled by a type I BBO crystal outside of the cavity.

  18. Femtosecond Fiber Lasers

    Science.gov (United States)

    Bock, Katherine J.

    This thesis focuses on research I have done on ytterbium-doped femtosecond fiber lasers. These lasers operate in the near infrared region, lasing at 1030 nm. This wavelength is particularly important in biomedical applications, which includes but is not limited to confocal microscopy and ablation for surgical incisions. Furthermore, fiber lasers are advantageous compared to solid state lasers in terms of their cost, form factor, and ease of use. Solid state lasers still dominate the market due to their comparatively high energy pulses. High energy pulse generation in fiber lasers is hindered by either optical wave breaking or by multipulsing. One of the main challenges for fiber lasers is to overcome these limitations to achieve high energy pulses. The motivation for the work done in this thesis is increasing the output pulse peak power and energy. The main idea of the work is that decreasing the nonlinearity that acts on the pulse inside the cavity will prevent optical wave breaking, and thus will generate higher energy pulses. By increasing the output energy, ytterbium-doped femtosecond fiber lasers can be competitive with solid state lasers which are used commonly in research. Although fiber lasers tend to lack the wavelength tuning ability of solid state lasers, many biomedical applications take advantage of the 1030 microm central wavelength of ytterbium-doped fiber lasers, so the major limiting factor of fiber lasers in this field is simply the output power. By increasing the output energy without resorting to external amplification, the cavity is optimized and cost can remain low and economical. During verification of the main idea, the cavity was examined for possible back-reflections and for components with narrow spectral bandwidths which may have contributed to the presence of multipulsing. Distinct cases of multipulsing, bound pulse and harmonic mode-locking, were observed and recorded as they may be of more interest in the future. The third

  19. Lasers '90: Proceedings of the 13th International Conference on Lasers and Applications, San Diego, CA, Dec. 10-14, 1990

    International Nuclear Information System (INIS)

    Harris, D.G.; Herbelin, J.

    1991-01-01

    The general topics considered are: x-ray lasers; FELs; solid state lasers; techniques and phenomena of ultrafast lasers; optical filters and free space laser communications; discharge lasers; tunable lasers; applications of lasers in medicine and surgery; lasers in materials processing; high power lasers; dynamics gratings, wave mixing, and holography; up-conversion lasers; lidar and laser radar; laser resonators; excimer lasers; laser propagation; nonlinear and quantum optics; blue-green technology; imaging; laser spectroscopy; chemical lasers; dye lasers; and lasers in chemistry

  20. High power ultrashort pulse lasers

    International Nuclear Information System (INIS)

    Perry, M.D.

    1994-01-01

    Small scale terawatt and soon even petawatt (1000 terawatt) class laser systems are made possible by application of the chirped-pulse amplification technique to solid-state lasers combined with the availability of broad bandwidth materials. These lasers make possible a new class of high gradient accelerators based on the large electric fields associated with intense laser-plasma interactions or from the intense laser field directly. Here, we concentrate on the laser technology to produce these intense pulses. Application of the smallest of these systems to the production of high brightness electron sources is also introduced