WorldWideScience

Sample records for cyclic biopolymers iv

  1. Nonbonded interactions in membrane active cyclic biopolymers. IV - Cation dependence

    Science.gov (United States)

    Radhakrishnan, R.; Srinivasan, S.; Prasad, C. V.; Brinda, S. R.; Macelroy, R. D.; Sundaram, K.

    1980-01-01

    Interactions of valinomycin and form of its analogs in several conformations with the central ions Li(+), Na(+), K(+), Rb(+) and Cs(+) are investigated as part of a study of the specific preference of valinomycin for potassium and the mechanisms of carrier-mediated ion transport across membranes. Ion binding energies and conformational potential energies are calculated taking into account polarization energy formulas and repulsive energy between the central ion and the ligand atoms for conformations representing various stages in ion capture and release for each of the two ring chiralities of valinomycin and its analogs. Results allow the prediction of the chirality and conformation most likely to be observed for a given analog, and may be used to synthesize analogs with a desired rigidity or flexibility. The binding energies with the alkali metal cations are found to decrease with increasing ion size, and to be smaller than the corresponding ion hydration energies. It is pointed out that the observed potassium preference may be explainable in terms of differences between binding and hydration energies. Binding energies are also noted to depend on ligand conformation.

  2. Oxidation of alginate and pectate biopolymers by cerium(IV) in perchloric and sulfuric acid solutions: A comparative kinetic and mechanistic study.

    Science.gov (United States)

    Fawzy, Ahmed

    2016-03-15

    The kinetics of oxidation of alginate (Alg) and pectate (Pec) carbohydrate biopolymers was studied by spectrophotometry in aqueous perchloric and sulfuric acid solutions at fixed ionic strengths and temperature. In both acids, the reactions showed a first order dependence on [Ce(IV)], whereas the orders with respect to biopolymer concentrations are less than unity. In perchloric acid, the reactions exhibited less than unit orders with respect to [H(+)] whereas those proceeded in sulfuric acid showed negative fractional-first order dependences on [H(+)]. The effect of ionic strength and dielectric constant was studied. Probable mechanistic schemes for oxidation reactions were proposed. In both acids, the final oxidation products were characterized as mono-keto derivatives of both biopolymers. The activation parameters with respect to the slow step of the mechanisms were computed and discussed. The rate laws were derived and the reaction constants involved in the different steps of the mechanisms were calculated.

  3. Completely recyclable biopolymers with linear and cyclic topologies via ring-opening polymerization of γ-butyrolactone.

    Science.gov (United States)

    Hong, Miao; Chen, Eugene Y-X

    2016-01-01

    Ring-opening polymerization (ROP) is a powerful synthetic methodology for the chemical synthesis of technologically important biodegradable aliphatic polyesters from cyclic esters or lactones. However, the bioderived five-membered γ-butyrolactone (γ-BL) is commonly referred as 'non-polymerizable' because of its low strain energy. The chemical synthesis of poly(γ-butyrolactone) (PγBL) through the ROP process has been realized only under ultrahigh pressure (20,000 atm, 160 °C) and only produces oligomers. Here we report that the ROP of γ-BL can, with a suitable catalyst, proceed smoothly to high conversions (90%) under ambient pressure to produce PγBL materials with a number-average molecular weight up to 30 kg mol(-1) and with controlled linear and/or cyclic topologies. Remarkably, both linear and cyclic PγBLs can be recycled back into the monomer in quantitative yield by simply heating the bulk materials at 220 °C (linear polymer) or 300 °C (cyclic polymer) for one hour, which thereby demonstrates the complete recyclability of PγBL.

  4. Cyclic voltammetry study of Ce(IV/Ce(III redox couple and Ce(IV-F complex in sulfuric acid medium

    Directory of Open Access Journals (Sweden)

    J. G. He

    2016-10-01

    Full Text Available In this paper the electrochemical behaviors of Ce(IV/Ce(III redox couple and Ce(IV - F complex in sulfuric acid medium were studied by cyclic voltammetry using a platinum electrode. Both of the Ce(IV/Ce(III couple in Ce(IV solution and Ce(IV - F complex is a quasi-reversible process, and gives a linear correlation between the peak potentials and square root of scan rates, showing that the kinetics of the overall process is diffusion controlled. The complexation of cerium(IV and fluoride is favorable for the oxidation of Ce(III. The kinetic parameters such as diffusion coefficients, anodic transfer coefficients and rate constants were studied.

  5. Cyclic di-GMP riboswitch-regulated type IV pili contribute to aggregation of Clostridium difficile.

    Science.gov (United States)

    Bordeleau, Eric; Purcell, Erin B; Lafontaine, Daniel A; Fortier, Louis-Charles; Tamayo, Rita; Burrus, Vincent

    2015-03-01

    Clostridium difficile is an anaerobic Gram-positive bacterium that causes intestinal infections with symptoms ranging from mild diarrhea to fulminant colitis. Cyclic diguanosine monophosphate (c-di-GMP) is a bacterial second messenger that typically regulates the switch from motile, free-living to sessile and multicellular behaviors in Gram-negative bacteria. Increased intracellular c-di-GMP concentration in C. difficile was recently shown to reduce flagellar motility and to increase cell aggregation. In this work, we investigated the role of the primary type IV pilus (T4P) locus in c-di-GMP-dependent cell aggregation. Inactivation of two T4P genes, pilA1 (CD3513) and pilB1 (CD3512), abolished pilus formation and significantly reduced cell aggregation under high c-di-GMP conditions. pilA1 is preceded by a putative c-di-GMP riboswitch, predicted to be transcriptionally active upon c-di-GMP binding. Consistent with our prediction, high intracellular c-di-GMP concentration increased transcript levels of T4P genes. In addition, single-round in vitro transcription assays confirmed that transcription downstream of the predicted transcription terminator was dose dependent and specific to c-di-GMP binding to the riboswitch aptamer. These results support a model in which T4P gene transcription is upregulated by c-di-GMP as a result of its binding to an upstream transcriptionally activating riboswitch, promoting cell aggregation in C. difficile.

  6. CYCLIC VOLTAMMETRY STUDIES OF COPPER (II AND TELLURIUM (IV IONS IN ACIDIC AQUEOUS SOLUTIONS FOR THIN FILM DEPOSITION

    Directory of Open Access Journals (Sweden)

    SARAVANAN NAGALINGAM

    2014-05-01

    Full Text Available Cyclic voltammetry studies of copper (II and tellurium (IV ions in acidic aqueous solutions were carried out to determine the optimum condition for copper telluride thin film deposition. The voltammetry studies include reversible scans at different solution pH. Based on the voltammogram, suitable deposition conditions was determined to be in the range of -0.35 V to -0.45 V versus Ag/AgCl at pH values between 2.0 to 2.2 under non diffusion-limited conditions.

  7. Synthesis and Structure of Cyclic Hexanuclear Oxo-alkoxo-carboxylatoniobium(IV) Complexes

    DEFF Research Database (Denmark)

    Ooi, Bee Lean; Søtofte, Inger; Vittal, Jagadese J.

    2004-01-01

    The reaction of trichloroacetic acid and trfluoroacetic acid with zinc-reduced niobium pentachloride in ethanolic solutions affords the compounds Nb6(mu2-O)3(mu2-O2CCX3)6(mu2-OC2H5)6(OC2H5)6 (X = Cl, F respectively). A cyclic hexanuclear structure is revealed by X-ray crystallographic studies....

  8. Extracted species of Np(IV) complex with diglycolamide functionalized task specific ionic liquid: diffusion, kinetics and thermodynamics by cyclic voltammetry

    NARCIS (Netherlands)

    Sengupta, A; Murali, M.S.; Mohapatra, P.K.; Iqbal, M.; Huskens, Jurriaan; Verboom, Willem

    2015-01-01

    This paper reports a first-ever cyclic voltammetric study and the electrochemical characterization of Np(IV) complexes with task-specific ionic liquid with appended diglycolamide (DGA-TSIL) ligand dissolved in the room-temperature ionic liquid 1-butyl-3-methylimidazolium

  9. Genetic merit for fertility traits in Holstein cows: IV. Transition period, uterine health, and resumption of cyclicity.

    Science.gov (United States)

    Moore, S G; Fair, T; Lonergan, P; Butler, S T

    2014-05-01

    The objective of this study was to monitor the dry matter intake (DMI), metabolic status, uterine health, and resumption of cyclicity in cows with similar genetic merit for milk production traits but with either good (Fert+) or poor genetic merit (Fert-) for fertility traits. Twenty-six cows were enrolled in the study and data are reported for 15 Fert+ and 10 Fert- cows that completed the study. All cows received a total mixed ration diet during early lactation and were turned out to pasture in late spring. Dry matter intake was recorded daily from wk -2 to 5 relative to parturition. Blood metabolites and metabolic hormones were measured from wk -2 to 8 relative to parturition. Milk production, body condition score, and body weight until wk 35 of lactation are reported. To monitor uterine health, vaginal mucus was scored weekly on a scale of 0 (no pus) to 3 (≥ 50% pus) from parturition to wk 8 and uterine polymorphonuclear neutrophil count was measured at wk 3 and 6 postpartum. Prepartum DMI was similar between genotypes, but Fert+ cows had significantly greater DMI than Fert- cows (19.7 vs. 16.8 kg of dry matter/d) during the postpartum period. Energy balance at wk 1 was significantly greater in Fert+ cows than in Fert- cows [2.3 vs. -1.12 unité fourragère lait (UFL)/d]. The Fert+ cows had significantly greater daily milk solids production (1.89 vs. 1.74 kg/d) and tended to have greater daily milk yield (24.2 vs. 22.3 kg/d). The Fert+ cows had significantly greater mean circulating insulin-like growth factor-I (102.62 vs. 56.85 ng/mL) and tended to have greater mean circulating insulin (3.25 vs. 2.62 μIU/mL) compared with Fert- cows from wk -2 to 8 relative to parturition. Mean circulating glucose (3.40 vs. 3.01 mmol/L) concentrations were significantly greater in Fert+ cows compared with Fert- cows from wk -2 to 3 relative to parturition. The Fert+ cows maintained significantly greater mean body condition score throughout lactation compared with Fert- cows

  10. Biopolymer organization upon confinement

    Energy Technology Data Exchange (ETDEWEB)

    Marenduzzo, D [SUPA, School of Physics, University of Edinburgh, Mayfield Road, Edinburgh EH9 3JZ (United Kingdom); Micheletti, C [SISSA, International School for Advanced Studies, CNR-INFM Democritos and Italian Institute of Technology, SISSA Unit via Bonomea, 265, Trieste (Italy); Orlandini, E [Dipartimento di Fisica, Universita di Padova and Sezione INFN Padova, Via Marzolo 8, 35131, Padova (Italy)

    2010-07-21

    Biopolymers in vivo are typically subject to spatial restraints, either as a result of molecular crowding in the cellular medium or of direct spatial confinement. DNA in living organisms provides a prototypical example of a confined biopolymer. Confinement prompts a number of biophysics questions. For instance, how can the high level of packing be compatible with the necessity to access and process the genomic material? What mechanisms can be adopted in vivo to avoid the excessive geometrical and topological entanglement of dense phases of biopolymers? These and other fundamental questions have been addressed in recent years by both experimental and theoretical means. A review of the results, particularly of those obtained by numerical studies, is presented here. The review is mostly devoted to DNA packaging inside bacteriophages, which is the best studied example both experimentally and theoretically. Recent selected biophysical studies of the bacterial genome organization and of chromosome segregation in eukaryotes are also covered. (topical review)

  11. Coupled biopolymer networks

    Science.gov (United States)

    Schwarz, J. M.; Zhang, Tao

    2015-03-01

    The actin cytoskeleton provides the cell with structural integrity and allows it to change shape to crawl along a surface, for example. The actin cytoskeleton can be modeled as a semiflexible biopolymer network that modifies its morphology in response to both external and internal stimuli. Just inside the inner nuclear membrane of a cell exists a network of filamentous lamin that presumably protects the heart of the cell nucleus--the DNA. Lamins are intermediate filaments that can also be modeled as semiflexible biopolymers. It turns out that the actin cytoskeletal biopolymer network and the lamin biopolymer network are coupled via a sequence of proteins that bridge the outer and inner nuclear membranes. We, therefore, probe the consequences of such a coupling via numerical simulations to understand the resulting deformations in the lamin network in response to perturbations in the cytoskeletal network. Such study could have implications for mechanical mechanisms of the regulation of transcription, since DNA--yet another semiflexible polymer--contains lamin-binding domains, and, thus, widen the field of epigenetics.

  12. Production of novel microbial biopolymers

    Science.gov (United States)

    Microorganisms are well known to produce a wide variety of biobased polymers. These biopolymers have found a wide range of commercial uses, including food, feed, and consumer and industrial products. The production and possible uses of several novel biopolymers from both bacteria and fungi will be d...

  13. Conformational changes in biopolymers

    Science.gov (United States)

    Ivanov, Vassili

    2005-12-01

    Biopolymer conformational changes are involved in many biological processes. This thesis summarizes some theoretical and experimental approaches which I have taken at UCLA to explore conformational changes in biopolymers. The reversible thermal denaturation of the DNA double helix is, perhaps, the simplest example of biopolymer conformational change. I have developed a statistical mechanics model of DNA melting with reduced degrees of freedom, which allows base stacking interaction to be taken into account and treat base pairing and stacking separately. Unlike previous models, this model describes both the unpairing and unstacking parts of the experimental melting curves and explains the observed temperature dependence of the effective thermodynamic parameters used in models of the nearest neighbor type. I developed a basic kinetic model for irreversible thermal denaturation of F-actin, which incorporates depolymerization of F-actin from the ends and breaking of F-actin fiber in the middle. The model explains the cooperativity of F-actin thermal denaturation observed by D. Pavlov et al. in differential calorimetry measurements. CG-rich DNA sequences form left-handed Z-DNA at high ionic strength or upon binding of polyvalent ions and some proteins. I studied experimentally the B-to-Z transition of the (CG)6 dodecamer. Improvement of the locally linearized model used to interpret the data gives evidence for an intermediate state in the B-to-Z transition of DNA, contrary to previous research on this subject. In the past 15 years it has become possible to study the conformational changes of biomolecules using single-molecule techniques. In collaboration with other lab members I performed a single-molecule experiment, where we monitored the displacement of a micrometer-size bead tethered to a surface by a DNA probe undergoing the conformational change. This technique allows probing of conformational changes with subnanometer accuracy. We applied the method to detect

  14. Abiotic origin of biopolymers

    Science.gov (United States)

    Oro, J.; Stephen-Sherwood, E.

    1976-01-01

    A variety of methods have been investigated in different laboratories for the polymerization of amino acids and nucleotides under abiotic conditions. They include (1) thermal polymerization; (2) direct polymerization of certain amino acid nitriles, amides, or esters; (3) polymerization using polyphosphate esters; (4) polymerization under aqueous or drying conditions at moderate temperatures using a variety of simple catalysts or condensing agents like cyanamide, dicyandiamide, or imidazole; and (5) polymerization under similar mild conditions but employing activated monomers or abiotically synthesized high-energy compounds such as adenosine 5'-triphosphate (ATP). The role and significance of these methods for the synthesis of oligopeptides and oligonucleotides under possible primitive-earth conditions is evaluated. It is concluded that the more recent approach involving chemical processes similar to those used by contemporary living organisms appears to offer a reasonable solution to the prebiotic synthesis of these biopolymers.

  15. Processes for xanthomonas biopolymers

    Energy Technology Data Exchange (ETDEWEB)

    Engelskirchen, K.; Stein, W.; Bahn, M.; Schieferstein, L.; Schindler, J.

    1984-03-27

    A process is described for producing xanthan gum in which the use of a stable, water-in-oil emulsion in the fermentation medium markedly lowers the viscosity of the medium, resulting in lower energy requirements for the process, and also resulting in enhanced yields of the biopolymer. In such an emulsion, the aqueous fermentation phase, with its microbial growth and metabolic processes, takes place in a finely dispersed homogeneous oil phase. The viscosity increase in each droplet of the aqueous nutrient solution will not noticeably affect this mixture in the fermenter because the viscosity of the reaction mixture in the fermenter is determined primarily by the viscosity of the oil phase. 45 claims

  16. The estimation of harmfulness for environment of moulding sand with biopolymer binder based on polylactide

    Directory of Open Access Journals (Sweden)

    K. Major-Gabryś

    2011-01-01

    Full Text Available The article takes into consideration technological and ecological aspects of IV generation moulding sands. Investigations concerning anapplication of biopolymer materials as binders for moulding sands are presented in the paper. These investigations are the continuation ofexaminations related to applications of various biopolymers as binding agents and to the properties of the moulding sands with biopolymerbinders. In the paper there are the researches concerning analyzing gases emitted from moulding sands during heating.

  17. Detection of the Sn(III) intermediate and the mechanism of the Sn(IV)/Sn(II) electroreduction reaction in bromide media by cyclic voltammetry and scanning electrochemical microscopy.

    Science.gov (United States)

    Chang, Jinho; Bard, Allen J

    2014-01-08

    Fast-scan cyclic voltammetry (CV) and scanning electrochemical microscopy (SECM) were used to investigate the reduction of Sn(IV) as the hexabromo complex ion in a 2 M HBr-4 M NaBr medium. CV at scan rates to 100 V/s and SECM indicated the reaction pathway involves ligand-coupled electron transfer via an ECEC-DISP process: (1) one-electron reduction of Sn(IV)Br6(2-) to Sn(III)Br6(3-); (2) bromide dissociation of the reduced Sn(III)Br6(3-) to Sn(III)Br5(2-); (3) disproportionation of the reduced 2Sn(III)Br5(2-) to Sn(IV)Br5(-) and Sn(II)Br5(3-); (4) one-electron reduction of Sn(III)Br5(2-) to Sn(II)Br5(3-); (5) bromide dissociation from Sn(II)Br5 to Sn(II)Br4(2-). The intermediate Sn(III) species was confirmed by SECM(3-), where the Sn(III) generated at the Au tip was collected on a Au substrate in the tip generation/substrate collection mode when the distance between the tip and substrate was a few hundred nanometers.

  18. Semiflexible Biopolymers in Bundled Arrangements

    Directory of Open Access Journals (Sweden)

    Jörg Schnauß

    2016-07-01

    Full Text Available Bundles and networks of semiflexible biopolymers are key elements in cells, lending them mechanical integrity while also enabling dynamic functions. Networks have been the subject of many studies, revealing a variety of fundamental characteristics often determined via bulk measurements. Although bundles are equally important in biological systems, they have garnered much less scientific attention since they have to be probed on the mesoscopic scale. Here, we review theoretical as well as experimental approaches, which mainly employ the naturally occurring biopolymer actin, to highlight the principles behind these structures on the single bundle level.

  19. Lignin biopolymer based triboelectric nanogenerators

    Science.gov (United States)

    Bao, Yukai; Wang, Ruoxing; Lu, Yunmei; Wu, Wenzhuo

    2017-07-01

    Ongoing research in triboelectric nanogenerators (TENGs) focuses on increasing power generation, but obstacles concerning economical and eco-friendly utilization of TENGs continue to prevail. Being the second most abundant biopolymer on earth, lignin offers a valuable opportunity for low-cost TENG applications in biomedical devices, benefitting from its biodegradability and biocompatibility. Here, we develop for the first time a lignin biopolymer based TENGs for harvesting mechanical energy in the environment, which shows great potential for self-powered biomedical devices among other applications and opens doors to new technologies that utilize otherwise wasted materials for economically feasible and ecologically friendly production of energy devices.

  20. Dynamics of forced biopolymer translocation

    CERN Document Server

    Lehtola, V V; Kaski, K; 10.1209/0295-5075/85/58006

    2009-01-01

    We present results from our simulations of biopolymer translocation in a solvent which explain the main experimental findings. The forced translocation can be described by simple force balance arguments for the relevant range of pore potentials in experiments and biological systems. Scaling of translocation time with polymer length varies with pore force and friction. Hydrodynamics affects this scaling and significantly reduces translocation times.

  1. Crosslinking biopolymers for biomedical applications.

    Science.gov (United States)

    Reddy, Narendra; Reddy, Roopa; Jiang, Qiuran

    2015-06-01

    Biomaterials made from proteins, polysaccharides, and synthetic biopolymers are preferred but lack the mechanical properties and stability in aqueous environments necessary for medical applications. Crosslinking improves the properties of the biomaterials, but most crosslinkers either cause undesirable changes to the functionality of the biopolymers or result in cytotoxicity. Glutaraldehyde, the most widely used crosslinking agent, is difficult to handle and contradictory views have been presented on the cytotoxicity of glutaraldehyde-crosslinked materials. Recently, poly(carboxylic acids) that can crosslink in both dry and wet conditions have been shown to provide the desired improvements in tensile properties, increase in stability under aqueous conditions, and also promote cell attachment and proliferation. Green chemicals and newer crosslinking approaches are necessary to obtain biopolymeric materials with properties desired for medical applications.

  2. Biocompatibility of plasma nanostructured biopolymers

    Energy Technology Data Exchange (ETDEWEB)

    Slepičková Kasálková, N. [Department of Solid State Engineering, Institute of Chemical Technology, 166 28 Prague (Czech Republic); Slepička, P., E-mail: petr.slepicka@vscht.cz [Department of Solid State Engineering, Institute of Chemical Technology, 166 28 Prague (Czech Republic); Bačáková, L. [Institute of Physiology, Academy of Sciences of the Czech Republic 142 20 Prague (Czech Republic); Sajdl, P. [Department of Power Engineering, Institute of Chemical Technology, 166 28 Prague (Czech Republic); Švorčík, V. [Department of Solid State Engineering, Institute of Chemical Technology, 166 28 Prague (Czech Republic)

    2013-07-15

    Many areas of medicine such as tissue engineering requires not only mastery of modification techniques but also thorough knowledge of the interaction of cells with solid state substrates. Plasma treatment can be used to effective modification, nanostructuring and therefore can significantly change properties of materials. In this work the biocompatibility of the plasma nanostructured biopolymers substrates was studied. Changes in surface chemical structure were studied by X-ray photoelectron spectroscopy (XPS). The morphology pristine and modified samples were determined using atomic force microscopy (AFM). The surface wettability was determined by goniometry from contact angle. Biocompatibility was determined by in vitro tests, the rat vascular smooth muscle cells (VSMCs) were cultivated on the pristine and plasma modified biopolymer substrates. Their adhesion, proliferation, spreading and homogeneous distribution on polymers was monitored. It was found that the plasma treatment leads to rapid decrease of contact angle for all samples. Contact angle decreased with increasing time of modification. XPS measurements showed that plasma treatment leads to changes in ratio of polar and non-polar groups. Plasma modification was accompanied by a change of surface morphology. Biological tests found that plasma treatment have positive effect on cells adhesion and proliferation cells and affects the size of cell’s adhesion area. Changes in plasma power or in exposure time influences the number of adhered and proliferated cells and their distribution on biopolymer surface.

  3. Biopolymers as a flexible resource for nanochemistry.

    Science.gov (United States)

    Schnepp, Zoe

    2013-01-21

    Biomass is an abundant source of chemically diverse macromolecules, including polysaccharides, polypeptides, and polyaromatics. Many of these biological polymers (biopolymers) are highly evolved for specific functions through optimized chain length, functionalization, and monomer sequence. As biopolymers are a chemical resource, much current effort is focused on the breakdown of these molecules into fuels or platform chemicals. However there is growing interest in using biopolymers directly to create functional materials. This Minireview uses recent examples to show how biopolymers are providing new directions in the synthesis of nanostructured materials.

  4. [Magnetic nanoparticles and intracellular delivery of biopolymers].

    Science.gov (United States)

    Kornev, A A; Dubina, M V

    2014-03-01

    The basic methods of intracellular delivery of biopolymers are present in this review. The structure and synthesis of magnetic nanoparticles, their stabilizing surfactants are described. The examples of the interaction of nanoparticles with biopolymers such as nucleic acids and proteins are considered. The final part of the review is devoted to problems physiology and biocompatibility of magnetic nanoparticles.

  5. Cyclic derangements

    CERN Document Server

    Assaf, Sami H

    2010-01-01

    A classic problem in enumerative combinatorics is to count the number of derangements, that is, permutations with no fixed point. Inspired by a recent generalization to facet derangements of the hypercube by Gordon and McMahon, we generalize this problem to enumerating derangements in the wreath product of any finite cyclic group with the symmetric group. We also give q- and (q, t)-analogs for cyclic derangements, generalizing results of Brenti and Gessel.

  6. Preparation of Biopolymer Aerogels Using Green Solvents

    Science.gov (United States)

    Subrahmanyam, Raman; Gurikov, Pavel; Meissner, Imke; Smirnova, Irina

    2016-01-01

    Although the first reports on aerogels made by Kistler1 in the 1930s dealt with aerogels from both inorganic oxides (silica and others) and biopolymers (gelatin, agar, cellulose), only recently have biomasses been recognized as an abundant source of chemically diverse macromolecules for functional aerogel materials. Biopolymer aerogels (pectin, alginate, chitosan, cellulose, etc.) exhibit both specific inheritable functions of starting biopolymers and distinctive features of aerogels (80-99% porosity and specific surface up to 800 m2/g). This synergy of properties makes biopolymer aerogels promising candidates for a wide gamut of applications such as thermal insulation, tissue engineering and regenerative medicine, drug delivery systems, functional foods, catalysts, adsorbents and sensors. This work demonstrates the use of pressurized carbon dioxide (5 MPa) for the ionic cross linking of amidated pectin into hydrogels. Initially a biopolymer/salt dispersion is prepared in water. Under pressurized CO2 conditions, the pH of the biopolymer solution is lowered to 3 which releases the crosslinking cations from the salt to bind with the biopolymer yielding hydrogels. Solvent exchange to ethanol and further supercritical CO2 drying (10 - 12 MPa) yield aerogels. Obtained aerogels are ultra-porous with low density (as low as 0.02 g/cm3), high specific surface area (350 - 500 m2/g) and pore volume (3 - 7 cm3/g for pore sizes less than 150 nm). PMID:27403649

  7. Autonomous valve for detection of biopolymer degradation

    DEFF Research Database (Denmark)

    Keller, Stephan Urs; Noeth, Nadine-Nicole; Fetz, Stefanie

    2009-01-01

    We present a polymer microvalve that allows the detection of biopolymer degradation without the need of external energy. The valve is based on a polymer container filled with a colored marker solution and closed by a thin lid. This structure is covered by a film of poly(L-lactide) and degradation...... of the biopolymer triggers the release of the color which is detected visually. The autonomous valve has potential for the fast testing of biopolymer degradation under various environmental conditions or by specific enzymes....

  8. Topology and geometry of biopolymers

    Energy Technology Data Exchange (ETDEWEB)

    Janse Van Rensburg, E.J. [York Univ., Downsview, Ontario (Canada); Orlandini, E.; Tesi, M.C. [Univ. of Toronto, Ontario (Canada)] [and others

    1996-12-31

    This paper is concerned with some simple lattice models of the entanglement complexity of polymers in dilute solution, with special reference to biopolymers such as DNA. We review a number of rigorous results about the asymptotic behavior of the knot probability, the entanglement complexity and the writhe of a lattice polygon (as a model of a ring polymer) and discuss Monte Carlo results for intermediate length polygons. In addition we discuss how this model can be augmented to include the effect of solvent quality and ionic strength. We also describe a lattice ribbon model which is able to capture the main properties of an oriented ribbon-like molecule (such as duplex DNA). 47 refs., 1 fig.

  9. Supramolecular nesting of cyclic polymers.

    Science.gov (United States)

    Kondratuk, Dmitry V; Perdigão, Luís M A; Esmail, Ayad M S; O'Shea, James N; Beton, Peter H; Anderson, Harry L

    2015-04-01

    Advances in template-directed synthesis make it possible to create artificial molecules with protein-like dimensions, directly from simple components. These synthetic macromolecules have a proclivity for self-organization that is reminiscent of biopolymers. Here, we report the synthesis of monodisperse cyclic porphyrin polymers, with diameters of up to 21 nm (750 C–C bonds). The ratio of the intrinsic viscosities for cyclic and linear topologies is 0.72, indicating that these polymers behave as almost ideal flexible chains in solution. When deposited on gold surfaces, the cyclic polymers display a new mode of two-dimensional supramolecular organization, combining encapsulation and nesting; one nanoring adopts a near-circular conformation, thus allowing a second nanoring to be captured within its perimeter, in a tightly folded conformation. Scanning tunnelling microscopy reveals that nesting occurs in combination with stacking when nanorings are deposited under vacuum, whereas when they are deposited directly from solution under ambient conditions there is stacking or nesting, but not a combination of both.

  10. Mixed Biopolymer Systems Based on Starch

    Directory of Open Access Journals (Sweden)

    Takahiro Noda

    2012-01-01

    Full Text Available A binary mixture of starch–starch or starch with other biopolymers such as protein and non-starch polysaccharides could provide a new approach in producing starch-based food products. In the context of food processing, a specific adjustment in the rheological properties plays an important role in regulating production processing and optimizing the applicability, stability, and sensory of the final food products. This review examines various biopolymer mixtures based on starch and the influence of their interaction on physicochemical and rheological properties of the starch-based foods. It is evident that the physicochemical and rheological characteristics of the biopolymers mixture are highly dependent on the type of starch and other biopolymers that make them up mixing ratios, mixing procedure and presence of other food ingredients in the mixture. Understanding these properties will lead to improve the formulation of starch–based foods and minimize the need to resort to chemically modified starch.

  11. A temperature responsive biopolymer for mercury remediation.

    Science.gov (United States)

    Kostal, Jan; Mulchandani, Ashok; Gropp, Katie E; Chen, Wilfred

    2003-10-01

    Tunable biopolymers based on elastin-like polypeptides (ELP) were engineered for the selective removal of mercury. ELP undergoes a reversible thermal precipitation within a wide range of temperatures and was exploited to enable easy recovery of the sequestered mercury. A bacterial metalloregulatory protein, MerR, which binds mercury with an unusually high affinity and selectivity, was fused to the ELP to provide the highly selective nature of the biopolymers. Selective binding of mercury was demonstrated at an expected ratio of 0.5 mercury/biopolymer, and minimal binding of competing heavy metals (cadmium, nickel, and zinc), even at 100-fold excess, was observed. The sequestered mercury was extracted easily, enabling continuous reuse of the biopolymers. In repeating cycles, mercury concentration was reduced to ppb levels, satisfying even drinking water limits. Utility of the biopolymers with mercury-contaminated Lake Elsinore water was demonstrated with no decrease in efficiency. The nanoscale biopolymers reported here using metalloregulatory proteins represent a "green" technology for environmentally benign mercury removal. As nature offers a wide selection of specific metalloregulatory proteins, this technology offers promising solutions to remediation of other important pollutants such as arsenic or chromium.

  12. Cyclic Voltammetry.

    Science.gov (United States)

    Evans, Dennis H.; And Others

    1983-01-01

    Cyclic voltammetry is a simple experiment that has become popular in chemical research because it can provide useful information about redox reactions in a form which is easily obtained and interpreted. Discusses principles of the method and illustrates its use in the study of four electrode reactions. (Author/JN)

  13. Cyclic Voltammetry.

    Science.gov (United States)

    Evans, Dennis H.; And Others

    1983-01-01

    Cyclic voltammetry is a simple experiment that has become popular in chemical research because it can provide useful information about redox reactions in a form which is easily obtained and interpreted. Discusses principles of the method and illustrates its use in the study of four electrode reactions. (Author/JN)

  14. Cell patterning with mucin biopolymers

    Science.gov (United States)

    Crouzier, T.; Jang, H.; Ahn, J.; Stocker, R.; Ribbeck, K.

    2014-01-01

    The precise spatial control of cell adhesion to surfaces is an endeavor that has enabled discoveries in cell biology and new possibilities in tissue engineering. The generation of cell-repellent surfaces currently requires advanced chemistry techniques and could be simplified. Here we show that mucins, glycoproteins of high structural and chemical complexity, spontaneously adsorb on hydrophobic substrates to form coatings that prevent the surface adhesion of mammalian epithelial cells, fibroblasts, and myoblasts. These mucin coatings can be patterned with micrometer precision using a microfluidic device, and are stable enough to support myoblast differentiation over seven days. Moreover, our data indicate that the cell-repellent effect is dependent on mucin-associated glycans because their removal results in a loss of effective cell-repulsion. Last, we show that a critical surface density of mucins, which is required to achieve cell-repulsion, is efficiently obtained on hydrophobic surfaces, but not on hydrophilic glass surfaces. However, this limitation can be overcome by coating glass with hydrophobic fluorosilane. We conclude that mucin biopolymers are attractive candidates to control cell adhesion on surfaces. PMID:23980712

  15. Cyclic multiverses

    CERN Document Server

    Marosek, Konrad; Balcerzak, Adam

    2015-01-01

    Starting with the idea of regularization of singularities due to the variability of the fundamental constants in cosmology we first study the cyclic universe models. We find two models of oscillating mass density and pressure regularized by varying gravitational constant $G$. Then, we extend this idea onto the multiverse containing cyclic individual universes with either growing or decreasing entropy though leaving the net entropy constant. In order to get the key idea, we consider the doubleverse with the same geometrical evolution of the two "parallel" universes with their physical evolution (physical coupling constants $c(t)$ and $G(t)$) being different. An interesting point is that there is a possibility to exchange the universes at the point of maximum expansion -- the fact which was already noticed in quantum cosmology. Similar scenario is also possible within the framework of Brans-Dicke theory.

  16. PREPARATION AND PROPERTIES OF EXTRACELLULAR BIOPOLYMER FLOCCULANT

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The biopolymer flocculant (named PS-2) producing by Pseudomonas fluorescens was investigated. The PS-2 had high efficiency with small dosage, when dealing with kaolin suspension, formed larger floc, with big sedimentation rate, over a wide range of temperatures. Distributing of flocculating activity test showed that the biopolymer flocculant was an extracellular product. The composition analysis of purified biopolymer flocculant showed that it composed mainly of polysaccharide and nucleic acid. The content of polysaccharide was 86.7%, which determined by using phenol-vitriol method, and the content of nucleic acid was 7.8%, which determined by UV absorption method. The biopolymer flocculant as a powder form showed much better stability than that as a supernatant. The character of biopolymer flocculant was stable even it was heated to 100℃ when it in acidic condition. The optimal conditions to flocculate kaolin suspension were as follows: pH 8~12, flocculant dosage 1mL/L, and Ca2+ as the optimal cation.

  17. PREPARATION AND PROPERTIES OF EXTRACELLULAR BIOPOLYMER FLOCCULANT

    Institute of Scientific and Technical Information of China (English)

    LI Chunxiang; LIU Binbin; XIONG Jinshui; YAN Jingchun

    2007-01-01

    The biopolymer flocculant (named PS-2) producing by Pseudomonas fluorescens was investigated. The PS-2 had high efficiency with small dosage, when dealing with kaolin suspension,formed larger floc, with big sedimentation rate, over a wide range of temperatures. Distributing of flocculating activity test showed that the biopolymer flocculant was an extracellular product. The composition analysis of purified biopolymer flocculant showed that it composed mainly of polysaccharide and nucleic acid. The content of polysaccharide was 86.7%, which determined by using phenol-vitriol method, and the content of nucleic acid was 7.8%, which determined by UV absorption method. The biopolymer flocculant as a powder form showed much better stability than that as a supernatant. The character of biopolymer flocculant was stable even it was heated to 100 ℃ when it in acidic condition. The optimal conditions to flocculate kaolin suspension were as follows:pH 8~12, flocculant dosage 1mL/L, and Ca2+ as the optimal cation.

  18. Recent advances in biopolymers and biopolymer-based nanocomposites for food packaging materials.

    Science.gov (United States)

    Tang, X Z; Kumar, P; Alavi, S; Sandeep, K P

    2012-01-01

    Plastic packaging for food and non-food applications is non-biodegradable, and also uses up valuable and scarce non-renewable resources like petroleum. With the current focus on exploring alternatives to petroleum and emphasis on reduced environmental impact, research is increasingly being directed at development of biodegradable food packaging from biopolymer-based materials. The proposed paper will present a review of recent developments in biopolymer-based food packaging materials including natural biopolymers (such as starches and proteins), synthetic biopolymers (such as poly lactic acid), biopolymer blends, and nanocomposites based on natural and synthetic biopolymers. The paper will discuss the various techniques that have been used for developing cost-effective biodegradable packaging materials with optimum mechanical strength and oxygen and moisture barrier properties. This is a timely review as there has been a recent renewed interest in research studies, both in the industry and academia, towards development of a new generation of biopolymer-based food packaging materials with possible applications in other areas.

  19. Molecular entanglement and electrospinnability of biopolymers.

    Science.gov (United States)

    Kong, Lingyan; Ziegler, Gregory R

    2014-09-03

    Electrospinning is a fascinating technique to fabricate micro- to nano-scale fibers from a wide variety of materials. For biopolymers, molecular entanglement of the constituent polymers in the spinning dope was found to be an essential prerequisite for successful electrospinning. Rheology is a powerful tool to probe the molecular conformation and interaction of biopolymers. In this report, we demonstrate the protocol for utilizing rheology to evaluate the electrospinnability of two biopolymers, starch and pullulan, from their dimethyl sulfoxide (DMSO)/water dispersions. Well-formed starch and pullulan fibers with average diameters in the submicron to micron range were obtained. Electrospinnability was evaluated by visual and microscopic observation of the fibers formed. By correlating the rheological properties of the dispersions to their electrospinnability, we demonstrate that molecular conformation, molecular entanglement, and shear viscosity all affect electrospinning. Rheology is not only useful in solvent system selection and process optimization, but also in understanding the mechanism of fiber formation on a molecular level.

  20. TOPICAL REVIEW: Biopolymer organization upon confinement

    Science.gov (United States)

    Marenduzzo, D.; Micheletti, C.; Orlandini, E.

    2010-07-01

    Biopolymers in vivo are typically subject to spatial restraints, either as a result of molecular crowding in the cellular medium or of direct spatial confinement. DNA in living organisms provides a prototypical example of a confined biopolymer. Confinement prompts a number of biophysics questions. For instance, how can the high level of packing be compatible with the necessity to access and process the genomic material? What mechanisms can be adopted in vivo to avoid the excessive geometrical and topological entanglement of dense phases of biopolymers? These and other fundamental questions have been addressed in recent years by both experimental and theoretical means. A review of the results, particularly of those obtained by numerical studies, is presented here. The review is mostly devoted to DNA packaging inside bacteriophages, which is the best studied example both experimentally and theoretically. Recent selected biophysical studies of the bacterial genome organization and of chromosome segregation in eukaryotes are also covered.

  1. Separation of biopolymer from fermentation broths

    Energy Technology Data Exchange (ETDEWEB)

    Griffith, W.L.; Compere, A.L.; Westmoreland, C.G.; Johnson, J.S. Jr.

    1981-01-01

    Application of recent developments in filtration separations have been applied to separation of biopolymers from fermentation broths. More economical production of biopolymers near the site of use would be especially attractive for use in micellar flood programs for enhanced oil recovery. Solutions of the organisms Sclerotium rolfsii producing scleroglucans were used for the tests because the organisms are genetically more stable than the organisms that produce xanthan gums and because their more acid broths are less apt to become contaminated. Three types of filtration, axial filtration, pleated ultrafiltration module, and microscreens were tested on the broth. Filtration results are reported for broths with various preparation histories. An economic comparison is presented for processing of a ton of biopolymer per day, and the microscreening process is shown to be the most efficient, but a polishing step would have to be added. (BLM)

  2. Cyclic Vitalism

    DEFF Research Database (Denmark)

    Halse, Sven

    2014-01-01

    an enthusiastic worshipping of life, one that holds youth, health, strength and beauty as its primary attributes, and which was prevalent in all aspects of cultural life around 1900. But even the post war founders of the Vitalist re-conceptualisation of this era, Wolfdietrich Rasch and Gunter Martens, warned...... that also encompasses notions of destruction, decay and death. “All life symbols in literature around 1900 are at the same time symbols of death”. (Rasch, W. 1967:24) Through the analyses of three poems, this article aims to show concrete examples of how cyclic Vitalist thinking is embedded in poetry...

  3. How the first biopolymers could have evolved.

    Science.gov (United States)

    Abkevich, V I; Gutin, A M; Shakhnovich, E I

    1996-01-01

    In this work, we discuss a possible origin of the first biopolymers with stable unique structures. We suggest that at the prebiotic stage of evolution, long organic polymers had to be compact to avoid hydrolysis and had to be soluble and thus must not be exceedingly hydrophobic. We present an algorithm that generates such sequences for model proteins. The evolved sequences turn out to have a stable unique structure, into which they quickly fold. This result illustrates the idea that the unique three-dimensional native structures of first biopolymers could have evolved as a side effect of nonspecific physicochemical factors acting at the prebiotic stage of evolution. PMID:8570645

  4. Microrheology of Biopolymer-Membrane Complexes

    Science.gov (United States)

    Helfer, E.; Harlepp, S.; Bourdieu, L.; Robert, J.; Mackintosh, F. C.; Chatenay, D.

    2000-07-01

    We create tailored microstructures, consisting of complexes of lipid membranes with self-assembled biopolymer shells, to study the fundamental properties and interactions of these basic components of living cells. We measure the mechanical response of these artificial structures at the micrometer scale, using optical tweezers and single-particle tracking. These systems exhibit rich dynamics that illustrate the viscoelastic character of the quasi-two-dimensional biopolymer network. We present a theoretical model relating the rheological properties of these membranes to the observed dynamics.

  5. Aqueous complexation of thorium(IV), uranium(IV), neptunium(IV), plutonium(III/IV), and cerium(III/IV) with DTPA.

    Science.gov (United States)

    Brown, M Alex; Paulenova, Alena; Gelis, Artem V

    2012-07-16

    Aqueous complexation of Th(IV), U(IV), Np(IV), Pu(III/IV), and Ce(III/IV) with DTPA was studied by potentiometry, absorption spectrophotometry, and cyclic voltammetry at 1 M ionic strength and 25 °C. The stability constants for the 1:1 complex of each trivalent and tetravalent metal were calculated. From the potentiometric data, we report stability constant values for Ce(III)DTPA, Ce(III)HDTPA, and Th(IV)DTPA of log β(101) = 20.01 ± 0.02, log β(111) = 22.0 ± 0.2, and log β(101) = 29.6 ± 1, respectively. From the absorption spectrophotometry data, we report stability constant values for U(IV)DTPA, Np(IV)DTPA, and Pu(IV)DTPA of log β(101) = 31.8 ± 0.1, 32.3 ± 0.1, and 33.67 ± 0.02, respectively. From the cyclic voltammetry data, we report stability constant values for Ce(IV) and Pu(III) of log β(101) = 34.04 ± 0.04 and 20.58 ± 0.04, respectively. The values obtained in this work are compared and discussed with respect to the ionic radius of each cationic metal.

  6. Cyclic multiverses

    Science.gov (United States)

    Marosek, Konrad; Dąbrowski, Mariusz P.; Balcerzak, Adam

    2016-09-01

    Using the idea of regularization of singularities due to the variability of the fundamental constants in cosmology we study the cyclic universe models. We find two models of oscillating and non-singular mass density and pressure (`non-singular' bounce) regularized by varying gravitational constant G despite the scale factor evolution is oscillating and having sharp turning points (`singular' bounce). Both violating (big-bang) and non-violating (phantom) null energy condition models appear. Then, we extend this idea on to the multiverse containing cyclic individual universes with either growing or decreasing entropy though leaving the net entropy constant. In order to get an insight into the key idea, we consider the doubleverse with the same geometrical evolution of the two `parallel' universes with their physical evolution [physical coupling constants c(t) and G(t)] being different. An interesting point is that there is a possibility to exchange the universes at the point of maximum expansion - the fact which was already noticed in quantum cosmology. Similar scenario is also possible within the framework of Brans-Dicke theory where varying G(t) is replaced by the dynamical Brans-Dicke field φ(t) though these theories are slightly different.

  7. Cyclic Vitalism

    DEFF Research Database (Denmark)

    Halse, Sven

    2014-01-01

    of taking such a unilateral view of what constituted a Vitalist concept of life. It could lead to a misunderstanding of Vitalist way of thinking, Rasch said, if the focus were only set upon the enthusiastic surplus, the worshipping of youth and health. To Vitalists, life is more than that. It is a totality...... that also encompasses notions of destruction, decay and death. “All life symbols in literature around 1900 are at the same time symbols of death”. (Rasch, W. 1967:24) Through the analyses of three poems, this article aims to show concrete examples of how cyclic Vitalist thinking is embedded in poetry...... of the era. The analyses include a further sub-categorisation to capture the different types of Life Force dealt with in the texts. By way of an introduction, Vitalism is discussed within the context of the scientific and social developments of the 19th Century....

  8. Exploring Modifications of Cotton with Biopolymers

    Science.gov (United States)

    Biopolymers including starch, alginate, and chitosan were grafted on to both nonwoven and woven cotton fabrics to examine their hemostatic and antimcrobial properties. The development of cotton-based health care fabrics that promote blood clotting and prevent microbial growth have wide applicability...

  9. [Conformation theory of polymers and biopolymers].

    Science.gov (United States)

    Volkenstein, M V

    1977-01-01

    A short review is given of the Soviet investigations in the field of physics of polymers and biopolymers based on the concept of conformational motility of macromolecules. It is shown that the ideas originally used for the treatment of the properties of the synthetic polymers and, in particular, of the rubber elasticity, have found broad applications in molecular biophysics.

  10. Fabrication of biopolymer cantilevers using nanoimprint lithography

    DEFF Research Database (Denmark)

    Keller, Stephan Sylvest; Feidenhans'l, Nikolaj Agentoft; Fisker-Bødker, Nis

    2011-01-01

    The biodegradable polymer poly(l-lactide) (PLLA) was introduced for the fabrication of micromechanical devices. For this purpose, thin biopolymer films with thickness around 10 μm were spin-coated on silicon substrates. Patterning of microcantilevers is achieved by nanoimprint lithography. A major...

  11. Biopolymer colloids for controlling and templating inorganic synthesis

    Directory of Open Access Journals (Sweden)

    Laura C. Preiss

    2014-11-01

    Full Text Available Biopolymers and biopolymer colloids can act as controlling agents and templates not only in many processes in nature, but also in a wide range of synthetic approaches. Inorganic materials can be either synthesized ex situ and later incorporated into a biopolymer structuring matrix or grown in situ in the presence of biopolymers. In this review, we focus mainly on the latter case and distinguish between the following possibilities: (i biopolymers as controlling agents of nucleation and growth of inorganic materials; (ii biopolymers as supports, either as molecular supports or as carrier particles acting as cores of core–shell structures; and (iii so-called “soft templates”, which include on one hand stabilized droplets, micelles, and vesicles, and on the other hand continuous scaffolds generated by gelling biopolymers.

  12. Mesoscopic Dynamics of Biopolymers and Protein Molecular Machines

    Science.gov (United States)

    Kapral, Raymond

    2013-03-01

    The dynamics of biopolymers in solution and in crowded molecular environments, which mimic some features of the interior of a biochemical cell, will be discussed. In particular, the dynamics of protein machines that utilize chemical energy to effect cyclic conformational changes to carry out their catalytic functions will be described. The investigation of the dynamics of such complex systems requires knowledge of the time evolution on physically relevant long distance and time scales. This often necessitates a coarse grained or mesoscopic treatment of the dynamics. A hybrid particle-based mesoscopic dynamical method, which combines molecular dynamics for a coarse-grain model of the proteins with multiparticle collision dynamics for the solvent, will be described and utilized to study the dynamics of such systems. See, C. Echeverria, Y. Togashi, A. S. Mikhailov, and R. Kapral, Phys. Chem. Chem. Phys 13, 10527 (2011); C. Echeverria and R. Kapral, Phys. Chem. Chem. Phys., 14, 6755 (2012); J. M. Schofield, P. Inder and R. Kapral, J. Chem. Phys. 136, 205101 (2012). Work was supported in part by a grant from the Natural Sciences and Engineering Research Council of Canada.

  13. Active biopolymers confer fast reorganization kinetics.

    Science.gov (United States)

    Swanson, Douglas; Wingreen, Ned S

    2011-11-18

    Many cytoskeletal biopolymers are "active," consuming energy in large quantities. In this Letter, we identify a fundamental difference between active polymers and passive, equilibrium polymers: for equal mean lengths, active polymers can reorganize faster than equilibrium polymers. We show that equilibrium polymers are intrinsically limited to linear scaling between mean lifetime (or mean first-passage time, or MFPT) and mean length, MFPT∼, by analogy to 1D Potts models. By contrast, we present a simple active-polymer model that improves upon this scaling, such that MFPT∼(1/2). Since, to be biologically useful, structural biopolymers must typically be many monomers long yet respond dynamically to the needs of the cell, the difference in reorganization kinetics may help to justify the active polymers' greater energy cost.

  14. Scleroglucan biopolymer production, properties, and economics

    Energy Technology Data Exchange (ETDEWEB)

    Compere, A. L.; Griffith, W. L.

    1980-01-01

    Production and solution properties which may make scleroglucan polysaccharide economically advantageous for onsite production and use in tertiary oil recovery were investigated. Scleroglucan, which is similar in viscosity and shear thinning to xanthan, can be produced in a 3-day batch or 12 h continuous fermentation. Yield is nearly 50% based on input glucose. Gross biopolymer-biomass separation may be effected using microscreening, a low energy process, followed by polish filtration. Polymer flux may be improved by hydrolysis with an endolaminarinase from Rhizopus arrhizius QM 1032. Simple feedstock requirements and low growth pH, together with the difficulty of resuspending dried polymer, may encourage field biopolymer fermentation and use of purified culture broth.

  15. Biopolymer elasticity: Mechanics and thermal fluctuations.

    Science.gov (United States)

    Sinha, Supurna; Samuel, Joseph

    2012-04-01

    We present an analytical study of the role of thermal fluctuations in shaping molecular elastic properties of semiflexible polymers. Our study interpolates between mechanics and statistical mechanics in a controlled way and shows how thermal fluctuations modify the elastic properties of biopolymers. We present a study of the minimum-energy configurations with explicit expressions for their energy and writhe and plots of the extension versus link for these configurations and a study of fluctuations around the local minima of energy and approximate analytical formulas for the free energy of stretched twisted polymers. The central result of our study is a closed-form expression for the leading thermal fluctuation correction to the free energy around the nonperturbative writhing family solution for the configuration of a biopolymer. From the derived formulas, the predictions of the wormlike chain model for molecular elasticity can be worked out for a comparison against numerical simulations and experiments.

  16. "Practical" Electrospinning of Biopolymers in Ionic Liquids.

    Science.gov (United States)

    Shamshina, Julia L; Zavgorodnya, Oleksandra; Bonner, Jonathan R; Gurau, Gabriela; Di Nardo, Thomas; Rogers, Robin D

    2017-01-10

    To address the need to scale up technologies for electrospinning of biopolymers from ionic liquids to practical volumes, a setup for the multi-needle electrospinning of chitin using the ionic liquid 1-ethyl-3-methylimidazolium acetate, [C2 mim]-[OAc], was designed, built, and demonstrated. Materials with controllable and high surface area were prepared at the nanoscale using ionic-liquid solutions of high-molecular-weight chitin extracted with the same ionic liquid directly from shrimp shells.

  17. Binding capacity: cooperativity and buffering in biopolymers.

    Science.gov (United States)

    Di Cera, E; Gill, S J; Wyman, J

    1988-01-01

    The group of linkage potentials resulting from the energy of a physicochemical system expressed per mol of a reference component, say a polyfunctional macromolecule, leads to the concept of binding capacity. This concept applies equally to both chemical and physical ligands and opens the way to consideration of higher-order linkage relationships. It provides a means of exploring the consequences of thermodynamic stability on generalized binding phenomena in biopolymers. PMID:3422436

  18. Rheology of Biopolymer Solutions and Gels

    OpenAIRE

    David R. Picout; Ross-Murphy, Simon B.

    2003-01-01

    Rheological techniques and methods have been employed for many decades in the characterization of polymers. Originally developed and used on synthetic polymers, rheology has then found much interest in the field of natural (bio) polymers. This review concentrates on introducing the fundamentals of rheology and on discussing the rheological aspects and properties of the two major classes of biopolymers: polysaccharides and proteins. An overview of both their solution properties (dilute to semi...

  19. Rheology of Biopolymer Solutions and Gels

    Directory of Open Access Journals (Sweden)

    David R. Picout

    2003-01-01

    Full Text Available Rheological techniques and methods have been employed for many decades in the characterization of polymers. Originally developed and used on synthetic polymers, rheology has then found much interest in the field of natural (bio polymers. This review concentrates on introducing the fundamentals of rheology and on discussing the rheological aspects and properties of the two major classes of biopolymers: polysaccharides and proteins. An overview of both their solution properties (dilute to semi-dilute and gel properties is described.

  20. The glass transition process in humid biopolymers. DSC study

    Energy Technology Data Exchange (ETDEWEB)

    Grunina, N A; Belopolskaya, T V; Tsereteli, G I [V.A. Fock Research Institute for Physics of Saint-Petersburg State University, 198504, Petrodvorets (Russian Federation)

    2006-05-15

    Thermal properties of native and denatured biopolymers with quite different chemical and steric structure (globular and fibrillar proteins, DNA, starches) were studied by means of differential scanning calorimetry in a wide range of temperatures and concentrations of water. It was shown that both native and denatured humid biopolymers are glassy systems. The glass transition temperature of these systems strongly depends on percentage of water, with water being simultaneously an intrinsic element of systems' ordered structure and a plasticizer of its amorphous state. On the base of the absolute values of heat capacities for biopolymer-water systems as a whole, heat capacities for biopolymers themselves were calculated as functions on water concentration at fixed temperatures. The S-shaped change of heat capacity observed on diagrams of state both for native and denatured biopolymers is the manifestation of biopolymers' passing through the vitrification region, as it occurs for denatured samples at heating.

  1. Molecular Entanglement and Electrospinnability of Biopolymers

    Science.gov (United States)

    Kong, Lingyan; Ziegler, Gregory R.

    2014-01-01

    Electrospinning is a fascinating technique to fabricate micro- to nano-scale fibers from a wide variety of materials. For biopolymers, molecular entanglement of the constituent polymers in the spinning dope was found to be an essential prerequisite for successful electrospinning. Rheology is a powerful tool to probe the molecular conformation and interaction of biopolymers. In this report, we demonstrate the protocol for utilizing rheology to evaluate the electrospinnability of two biopolymers, starch and pullulan, from their dimethyl sulfoxide (DMSO)/water dispersions. Well-formed starch and pullulan fibers with average diameters in the submicron to micron range were obtained. Electrospinnability was evaluated by visual and microscopic observation of the fibers formed. By correlating the rheological properties of the dispersions to their electrospinnability, we demonstrate that molecular conformation, molecular entanglement, and shear viscosity all affect electrospinning. Rheology is not only useful in solvent system selection and process optimization, but also in understanding the mechanism of fiber formation on a molecular level. PMID:25226274

  2. Hydrogels from biopolymer hybrid for biomedical, food, and functional food applications

    Science.gov (United States)

    Hybrid hydrogels from biopolymers have been applied for various indications across a wide range of biomedical, pharmaceutical, and functional food industries. In particular, hybrid hydrogels synthesized from two biopolymers have attracted increasing attention. The inclusion of a second biopolymer st...

  3. Significance of collective motions in biopolymers and neutron scattering

    Energy Technology Data Exchange (ETDEWEB)

    Go, Nobuhiro [Kyoto Univ. (Japan)

    1996-05-01

    Importance of collective variable description of conformational dynamics of biopolymers and the vital role that neutron inelastic scattering phenomena would play in its experimental determination are discussed. (author)

  4. Sustainably Sourced, Thermally Resistant, Radiation Hard Biopolymer

    Science.gov (United States)

    Pugel, Diane

    2011-01-01

    This material represents a breakthrough in the production, manufacturing, and application of thermal protection system (TPS) materials and radiation shielding, as this represents the first effort to develop a non-metallic, non-ceramic, biomaterial-based, sustainable TPS with the capability to also act as radiation shielding. Until now, the standing philosophy for radiation shielding involved carrying the shielding at liftoff or utilizing onboard water sources. This shielding material could be grown onboard and applied as needed prior to different radiation landscapes (commonly seen during missions involving gravitational assists). The material is a bioplastic material. Bioplastics are any combination of a biopolymer and a plasticizer. In this case, the biopolymer is a starch-based material and a commonly accessible plasticizer. Starch molecules are composed of two major polymers: amylase and amylopectin. The biopolymer phenolic compounds are common to the ablative thermal protection system family of materials. With similar constituents come similar chemical ablation processes, with the potential to have comparable, if not better, ablation characteristics. It can also be used as a flame-resistant barrier for commercial applications in buildings, homes, cars, and heater firewall material. The biopolymer is observed to undergo chemical transformations (oxidative and structural degradation) at radiation doses that are 1,000 times the maximum dose of an unmanned mission (10-25 Mrad), indicating that it would be a viable candidate for robust radiation shielding. As a comparison, the total integrated radiation dose for a three-year manned mission to Mars is 0.1 krad, far below the radiation limit at which starch molecules degrade. For electron radiation, the biopolymer starches show minimal deterioration when exposed to energies greater than 180 keV. This flame-resistant, thermal-insulating material is non-hazardous and may be sustainably sourced. It poses no hazardous

  5. Fine Structure of Starch-Clay Composites as Biopolymers

    Science.gov (United States)

    Midsol 50 wheat starch and 5% Cloisite clay with or without the addition of glycerin were used to prepare biopolymers in a twin-screw extruder. Early trials of sectioning the unembedded biopolymer resulted in the immediate absorption of water and subsequent dissolution of the sample due to the the ...

  6. Formulation of indomethacin emulsion using biopolymer of Prunus avium.

    Science.gov (United States)

    Verma, Shivangi; Dabral, Prashant; Rana, Vinod; Upadhaya, Kumud; Bhardwaj

    2012-03-01

    The aim of the investigation was to formulate Indomethacin Emulsion using Bio-polymer as Emulsifier. Different batches of emulsions were prepared by varying concentration of biopolymer prunus avium. Based evaluation of the prepared polymers, a conclusion can be drawn that in the Prunus avium bio-material can serve as a promising film forming agent for formulating various drug.

  7. Formulation of indomethacin emulsion using biopolymer of Prunus avium

    Directory of Open Access Journals (Sweden)

    Shivangi Verma

    2012-01-01

    Full Text Available The aim of the investigation was to formulate Indomethacin Emulsion using Bio-polymer as Emulsifier. Different batches of emulsions were prepared by varying concentration of biopolymer prunus avium. Based evaluation of the prepared polymers, a conclusion can be drawn that in the Prunus avium bio-material can serve as a promising film forming agent for formulating various drug.

  8. Sugar and polyol solutions as effective solvent for biopolymers

    NARCIS (Netherlands)

    Sman, van der R.G.M.

    2016-01-01

    Ternary mixtures of biopolymers, sugars or polyols and water can be treated as a pseudo binary system with respect to melting of the biopolymer. Sugar and polyol solutions can be treated as an effective solvent, characterized by the density of hydroxyl groups available for intermolecular hydrogen

  9. Proton conduction in biopolymer exopolysaccharide succinoglycan

    Energy Technology Data Exchange (ETDEWEB)

    Kweon, Jin Jung [Department of Physics, Korea University, Seoul 136-713 (Korea, Republic of); National High Magnetic Field Laboratory, Florida State University, Tallahassee, Florida 32310 (United States); Lee, Kyu Won; Kim, Hyojung; Lee, Cheol Eui, E-mail: rscel@korea.ac.kr [Department of Physics, Korea University, Seoul 136-713 (Korea, Republic of); Jung, Seunho [Department of Bioscience and Biotechnology and UBITA, Konkuk University, Seoul 143-701 (Korea, Republic of); Kwon, Chanho [Naraebio Research Laboratories, 177 Dangha-ri, Bongdam-eup, Hawseong-si 445-892 (Korea, Republic of)

    2014-07-07

    Protonic currents play a vital role in electrical signalling in living systems. It has been suggested that succinoglycan plays a specific role in alfalfa root nodule development, presumably acting as the signaling molecules. In this regard, charge transport and proton dynamics in the biopolymer exopolysaccharide succinoglycan have been studied by means of electrical measurements and nuclear magnetic resonance (NMR) spectroscopy. In particular, a dielectric dispersion in the system has revealed that the electrical conduction is protonic rather electronic. Besides, our laboratory- and rotating-frame {sup 1}H NMR measurements have elucidated the nature of the protonic conduction, activation of the protonic motion being associated with a glass transition.

  10. Ideal-Chain Collapse in Biopolymers

    CERN Document Server

    Neumann, R M

    2000-01-01

    A conceptual difficulty in the Hooke's-law description of ideal Gaussian polymer-chain elasticity is sometimes apparent in analyses of experimental data or in physical models designed to simulate the behavior of biopolymers. The problem, the tendency of a chain to collapse in the absence of external forces, is examined in the following examples: DNA-stretching experiments, gel electrophoresis, and protein folding. We demonstrate that the application of a statistical-mechanically derived repulsive force, acting between the chain ends, whose magnitude is proportional to the absolute temperature and inversely proportional to the scalar end separation removes this difficulty.

  11. Mathematical methods of analysis of biopolymer sequences

    CERN Document Server

    Gindikin, S G

    1992-01-01

    This collection contains papers by participants in the seminar on mathematical methods in molecular biology who worked for several years at the Laboratory of Molecular Biology and Bioorganic Chemistry (now the Institute of Physical and Chemical Problems in Biology) at Moscow State University. The seminar united mathematicians and biologists around the problems of biological sequences. The collection includes original results as well as expository material and spans a range of perspectives, from purely mathematical problems to algorithms and their computer realizations. For this reason, the book is of interest to mathematicians, statisticians, biologists, and computational scientists who work with biopolymer sequences.

  12. Proton conduction in biopolymer exopolysaccharide succinoglycan

    Science.gov (United States)

    Kweon, Jin Jung; Lee, Kyu Won; Kim, Hyojung; Lee, Cheol Eui; Jung, Seunho; Kwon, Chanho

    2014-07-01

    Protonic currents play a vital role in electrical signalling in living systems. It has been suggested that succinoglycan plays a specific role in alfalfa root nodule development, presumably acting as the signaling molecules. In this regard, charge transport and proton dynamics in the biopolymer exopolysaccharide succinoglycan have been studied by means of electrical measurements and nuclear magnetic resonance (NMR) spectroscopy. In particular, a dielectric dispersion in the system has revealed that the electrical conduction is protonic rather electronic. Besides, our laboratory- and rotating-frame 1H NMR measurements have elucidated the nature of the protonic conduction, activation of the protonic motion being associated with a glass transition.

  13. 3D-Printed Biopolymers for Tissue Engineering Application

    Directory of Open Access Journals (Sweden)

    Xiaoming Li

    2014-01-01

    Full Text Available 3D printing technology has recently gained substantial interest for potential applications in tissue engineering due to the ability of making a three-dimensional object of virtually any shape from a digital model. 3D-printed biopolymers, which combine the 3D printing technology and biopolymers, have shown great potential in tissue engineering applications and are receiving significant attention, which has resulted in the development of numerous research programs regarding the material systems which are available for 3D printing. This review focuses on recent advances in the development of biopolymer materials, including natural biopolymer-based materials and synthetic biopolymer-based materials prepared using 3D printing technology, and some future challenges and applications of this technology are discussed.

  14. Biopolymer-Based Delivery Systems: Challenges and Opportunities.

    Science.gov (United States)

    Joye, Iris J; McClements, D Julian

    2016-01-01

    Biopolymer-based nanostructures or microstructures can be fabricated with different compositions, structures, and properties so that colloidal delivery systems can be tailored for specific applications. These structures can be assembled using various approaches, including electrospinning, coacervation, nanoprecipitation, injection, layer-by-layer deposition, and/or gelation. A major application of biopolymer-based particles is to encapsulate, protect, and release active molecules in the agricultural, food, supplements, personal care, and pharmaceutical sectors. The inherent variability and complexity of biopolymers (proteins and polysaccharides) often makes it challenging to produce particles with well-defined physicochemical and functional attributes. In this review, we discuss the properties of biopolymers, common particle fabrication methods, and some of the major challenges and opportunities associated with developing biopolymer-based particles for application as food-grade delivery systems.

  15. Recent advances in microbial biopolymer production and purification.

    Science.gov (United States)

    Kreyenschulte, Dirk; Krull, Rainer; Margaritis, Argyrios

    2014-03-01

    Over the past decades a large amount of biopolymers originating from various types of microorganisms have been reported. With ongoing research the number of possible applications has increased rapidly, ranging from use as food additives and biomedical agents to biodegradable plastics from renewable resources. In spite of the plethora of applications, the large-scale introduction of biopolymers into the market has often been forestalled by high production costs mainly due to complex or inefficient downstream processing. In this article, state-of-the-art methods and recent advances in the separation and purification of microbial polymers are reviewed, with special focus on the biopolymers, γ-polyglutamic acid and xanthan gum. Furthermore, a study of the general factors affecting production and purification is presented, including biopolymer rheology, enzymatic degradation and production of biopolymer mixtures.

  16. Cyclic Vomiting Syndrome

    Science.gov (United States)

    ... or the flu eating certain foods, such as chocolate or cheese, or additives such as caffeine, nitrites— ... people with cyclic vomiting syndrome. Eating, Diet, and Nutrition During the prodrome and vomiting phases of cyclic ...

  17. Superextensions of cyclic semigroups

    Directory of Open Access Journals (Sweden)

    V. M. Gavrylkiv

    2013-06-01

    Full Text Available Given a cyclic semigroup $S$ we study right and left zeros,singleton left ideals, the minimal ideal, left cancelable andright cancelable elements of superextensions $lambda(S$ andcharacterize cyclic semigroups whose superextensions arecommutative.

  18. Cyclic Railway Timetable Optimization

    NARCIS (Netherlands)

    L.W.P. Peeters (Leon)

    2003-01-01

    textabstractCyclic Railway Timetable Optimization describes mathematical models and solution methods for constructing high quality cyclic railway timetables. In a cyclic timetable, a train for a certain destination leaves a certain station at the same time every cycle time, say every half an hour,

  19. How new biopolymers can improve muds

    Energy Technology Data Exchange (ETDEWEB)

    Dino, D.; Lindblad, D.E.; Moorhouse, R. (Rhoene-Poulenc Inc. (France))

    1993-11-01

    Xantham gum was introduced as a drilling-fluid component in the mid-1960s, but its use has risen noticeably since 1970, as prevalence of inhibitive polymeric drilling fluids has increased. Xanthan is known for its ability to build viscosity in both fresh water and salt solutions, its exceptional shear-thinning properties, and its tolerance to pH, all without environmental problems. Although biopolymers like xanthan typically represent only 0.25--1.5 lb/bbl of a drilling fluid, they are critical in building rheology, from spudding to the special demands of angled drilling and well completion. They add properties to muds which expand their use across a variety of formations and over a wide temperature range. Beyond xanthan, another useful class of biopolymers are the guar gums. Just as muds incorporating xanthan have been in the mainstay in rheology building over the years for many muds, fluids incorporating guar have long been the backbone of fracturing fluids. Guar and its derivatives are extremely versatile as rheology modifiers, particularly when used in conjunction with xanthans. In fact, xanthan/guar combinations have already been enhancing the effectiveness of muds at drill sites in the US. This paper reviews the performance of mixed xantham/guar additives to obtain an even better mud control system.

  20. Molecular Biodynamers: Dynamic Covalent Analogues of Biopolymers

    Science.gov (United States)

    2017-01-01

    Conspectus Constitutional dynamic chemistry (CDC) features the use of reversible linkages at both molecular and supramolecular levels, including reversible covalent bonds (dynamic covalent chemistry, DCC) and noncovalent interactions (dynamic noncovalent chemistry, DNCC). Due to its inherent reversibility and stimuli-responsiveness, CDC has been widely utilized as a powerful tool for the screening of bioactive compounds, the exploitation of receptors or substrates driven by molecular recognition, and the fabrication of constitutionally dynamic materials. Implementation of CDC in biopolymer science leads to the generation of constitutionally dynamic analogues of biopolymers, biodynamers, at the molecular level (molecular biodynamers) through DCC or at the supramolecular level (supramolecular biodynamers) via DNCC. Therefore, biodynamers are prepared by reversible covalent polymerization or noncovalent polyassociation of biorelevant monomers. In particular, molecular biodynamers, biodynamers of the covalent type whose monomeric units are connected by reversible covalent bonds, are generated by reversible polymerization of bio-based monomers and can be seen as a combination of biopolymers with DCC. Owing to the reversible covalent bonds used in DCC, molecular biodynamers can undergo continuous and spontaneous constitutional modifications via incorporation/decorporation and exchange of biorelevant monomers in response to internal or external stimuli. As a result, they behave as adaptive materials with novel properties, such as self-healing, stimuli-responsiveness, and tunable mechanical and optical character. More specifically, molecular biodynamers combine the biorelevant characters (e.g., biocompatibility, biodegradability, biofunctionality) of bioactive monomers with the dynamic features of reversible covalent bonds (e.g., changeable, tunable, controllable, self-healing, and stimuli-responsive capacities), to realize synergistic properties in one system. In addition

  1. Molecular Biodynamers: Dynamic Covalent Analogues of Biopolymers.

    Science.gov (United States)

    Liu, Yun; Lehn, Jean-Marie; Hirsch, Anna K H

    2017-02-21

    Constitutional dynamic chemistry (CDC) features the use of reversible linkages at both molecular and supramolecular levels, including reversible covalent bonds (dynamic covalent chemistry, DCC) and noncovalent interactions (dynamic noncovalent chemistry, DNCC). Due to its inherent reversibility and stimuli-responsiveness, CDC has been widely utilized as a powerful tool for the screening of bioactive compounds, the exploitation of receptors or substrates driven by molecular recognition, and the fabrication of constitutionally dynamic materials. Implementation of CDC in biopolymer science leads to the generation of constitutionally dynamic analogues of biopolymers, biodynamers, at the molecular level (molecular biodynamers) through DCC or at the supramolecular level (supramolecular biodynamers) via DNCC. Therefore, biodynamers are prepared by reversible covalent polymerization or noncovalent polyassociation of biorelevant monomers. In particular, molecular biodynamers, biodynamers of the covalent type whose monomeric units are connected by reversible covalent bonds, are generated by reversible polymerization of bio-based monomers and can be seen as a combination of biopolymers with DCC. Owing to the reversible covalent bonds used in DCC, molecular biodynamers can undergo continuous and spontaneous constitutional modifications via incorporation/decorporation and exchange of biorelevant monomers in response to internal or external stimuli. As a result, they behave as adaptive materials with novel properties, such as self-healing, stimuli-responsiveness, and tunable mechanical and optical character. More specifically, molecular biodynamers combine the biorelevant characters (e.g., biocompatibility, biodegradability, biofunctionality) of bioactive monomers with the dynamic features of reversible covalent bonds (e.g., changeable, tunable, controllable, self-healing, and stimuli-responsive capacities), to realize synergistic properties in one system. In addition, molecular

  2. Biopolymer protected silver nanoparticles on the support of carbon nanotube as interface for electrocatalytic applications

    Energy Technology Data Exchange (ETDEWEB)

    Satyanarayana, M.; Kumar, V. Sunil; Gobi, K. Vengatajalabathy, E-mail: drkvgobi@gmail.com, E-mail: satyam.nitw@gmail.com [Department of Chemistry, National Institute of Technology, Warangal - 506004, Telangana (India)

    2016-04-13

    In this research, silver nanoparticles (SNPs) are prepared on the surface of carbon nanotubes via chitosan, a biopolymer linkage. Here chitosan act as stabilizing agent for nanoparticles and forms a network on the surface of carbon nanotubes. Synthesized silver nanoparticles-MWCNT hybrid composite is characterized by UV-Visible spectroscopy, XRD analysis, and FESEM with EDS to evaluate the structural and chemical properties of the nanocomposite. The electrocatalytic activity of the fabricated SNP-MWCNT hybrid modified glassy carbon electrode has been evaluated by cyclic voltammetry and electrochemical impedance analysis. The silver nanoparticles are of size ∼35 nm and are well distributed on the surface of carbon nanotubes with chitosan linkage. The prepared nanocomposite shows efficient electrocatalytic properties with high active surface area and excellent electron transfer behaviour.

  3. Biopolymer protected silver nanoparticles on the support of carbon nanotube as interface for electrocatalytic applications

    Science.gov (United States)

    Satyanarayana, M.; Kumar, V. Sunil; Gobi, K. Vengatajalabathy

    2016-04-01

    In this research, silver nanoparticles (SNPs) are prepared on the surface of carbon nanotubes via chitosan, a biopolymer linkage. Here chitosan act as stabilizing agent for nanoparticles and forms a network on the surface of carbon nanotubes. Synthesized silver nanoparticles-MWCNT hybrid composite is characterized by UV-Visible spectroscopy, XRD analysis, and FESEM with EDS to evaluate the structural and chemical properties of the nanocomposite. The electrocatalytic activity of the fabricated SNP-MWCNT hybrid modified glassy carbon electrode has been evaluated by cyclic voltammetry and electrochemical impedance analysis. The silver nanoparticles are of size ˜35 nm and are well distributed on the surface of carbon nanotubes with chitosan linkage. The prepared nanocomposite shows efficient electrocatalytic properties with high active surface area and excellent electron transfer behaviour.

  4. Optical properties of DNA-CTMA biopolymers and applications in metal-biopolymer-metal photodetectors

    Science.gov (United States)

    Zhou, Bin; Kim, Sung Jin; Bartsch, Carrie M.; Heckman, Emily M.; Ouchen, Fahima; Cartwright, Alexander N.

    2011-09-01

    The potential of using a DNA biopolymer in an electro-optic device is presented. A complex of DNA with the cationic surfactant cetyltrimethylammonium-chloride (CTMA) was used to obtain an organic-soluble DNA material (DNA-CTMA). Poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS) was added to the DNACTMA to increase the electrical conductivity of the biopolymer. The CW absorbance and time-resolved photoluminescence of the resulting DNA-CTMA and DNA-CTMA-PEDOT:PSS were investigated. Both DNA materials have absorbance peaks at ~260 nm and a broad, Stokes shifted, photoluminescence peak around 470nm. The photoluminescence lifetime of the materials was observed to decrease with increasing UV excitation. Specifically, excitation with a high power ultrafast (~150fs) UV (266nm) laser pulse resulted in a drastic decrease in the photoluminescence lifetime decreases after a few minutes. Moreover, the observed decrease was faster in an air ambient than in a nitrogen ambient. This is most likely due to photo-oxidation that degrades the polymer surface resulting in an increase in the non-radiative recombination. In order to investigate the photoconductivity of these two materials, metal-biopolymer-metal (MBM) ultraviolet photodetectors with interdigitated electrodes were fabricated and characterized. The photoresponsivity of these devices was limited by the transport dynamics within the film. The prospects for the use of these materials in optical devices will be discussed.

  5. Elastin-like polypeptides: biomedical applications of tunable biopolymers.

    Science.gov (United States)

    MacEwan, Sarah R; Chilkoti, Ashutosh

    2010-01-01

    Artificial repetitive polypeptides have grown in popularity as a bioinspired alternative to synthetic polymers. The genetically encoded synthesis, monodispersity, potential lack of toxicity, and biocompatibility are attractive features of these biopolymers for biological applications. Elastin-like polypeptides (ELPs) are one such class of biopolymers that are of particular interest because of their "smart"-stimuli responsive-properties. Herein, we discuss the genetically encoded design and recombinant synthesis of ELPs that enable precise control of their physicochemical properties and which have led to a wide range of biomedical applications of these biopolymers in the last decade.

  6. An experimental investigation of electrical conductivities in biopolymers

    Indian Academy of Sciences (India)

    H Mallick; A Sarkar

    2000-08-01

    Gum arabica obtained from acacia plant is a conducting biopolymer. Experiments are carried out on this natural gum arabica. In the present study TGA, ion transference number, transient ionic current, thermal analysis, frequency and temperature variation of a.c. conductivity, Arrhenius plot and volt–ampere characteristics of specimens are carried out. The total electrical conductivity of these biopolymers are comparable to that of synthetic polymers doped with inorganic salts. The ion transference number of these biopolymers show their superionic nature of electrical conduction. The overall conduction mechanism seems to be protonic in nature rather than electronic one.

  7. Dual production of biopolymers from bacteria.

    Science.gov (United States)

    Sukan, Artun; Roy, Ipsita; Keshavarz, Tajalli

    2015-08-01

    Rapid depletion of natural resources with continued demands of an increasing population and high consumption rates of today's world will cause serious problems in the future. This, along with environmental concerns, has directed research towards finding alternatives in variety of sectors including sustainable and environmentally friendly consumer goods. Biopolymers of bacterial origin, with their vast range of applications, biodegradability and eco-friendly manufacturing processes, are one of the alternatives for a more sustainable future. However, the cost of their production is a drawback. Simultaneous production processes have always been an option for researchers in order to reduce cost, but the variable requirements of microorganisms to produce both different and valuable products are a hindering factor. This review will look at some examples and identify ideas towards developing a successful strategy for simultaneous production of bio-products. Copyright © 2015 Elsevier Ltd. All rights reserved.

  8. Manipulating Biopolymer Dynamics by Anisotropic Nanoconfinement

    CERN Document Server

    Zhang, Shao-Qing

    2007-01-01

    How the geometry of nano-sized confinement affects dynamics of biomaterials is interesting yet poorly understood. An elucidation of structural details upon nano-sized confinement may benefit manufacturing pharmaceuticals in biomaterial sciences and medicine. The behavior of biopolymers in nano-sized confinement is investigated using coarse-grained models and molecular simulations. Particularly, we address the effects of shapes of a confinement on protein folding dynamics by measuring folding rates and dissecting structural properties of the transition states in nano-sized spheres and ellipsoids. We find that when the form of a confinement resembles the geometrical properties of the transition states, the rates of folding kinetics are most enhanced. This knowledge of shape selectivity in identifying optimal conditions for reactions will have a broad impact in nanotechnology and pharmaceutical sciences.

  9. Fermentable sugars from biopolymers of bagasse

    Energy Technology Data Exchange (ETDEWEB)

    Ramachandran, K.; Das, K.; Sharma, D.K.

    1987-11-01

    Ethanol can replace oil as a fuel and its use would help in the conservation of the meagre oil reserves in India. The article indicates some convenient and cost-effective processes for the production of ethanol from biopolymers available in bagasse, an agricultural residue. A two-stage acid hydrolysis process produced a maximum of fermentable sugars at 35%. Calcium chloride used as a promoter enhanced production by 3.5%. Other promoters are under investigation. Agitation had a significant effect on production, complete hydrolysis being possible between 10-45 minutes depending on temperature. The fermentable sugars obtained, xylose and glucose, can then be fermented to ethanol in an integrated three-stage process. 11 refs., 3 figs., 3 tabs.

  10. High-performance liquid chromatography of biopolymers

    Energy Technology Data Exchange (ETDEWEB)

    Regnier, F.E.

    1983-10-21

    The ability to separate biological macromolecules with good resolution on liquid chromatographic columns has depended on the development of suitable packing materials. In size exclusion chromatography, molecules are separated by size on the basis of differential permeation of the packing. Ion exchange, hydrophobic interaction (or reversed-phase), and affinity chromatography are all surface-mediated separation methods, although they depend on different retention mechanisms. High-performance liquid chromatographic columns designed for biopolymers offer major advantages over conventional columns in both speed and resolving power. The exponential growth of literature on the high-performance separation of peptides and proteins in particular indicates that the techniques will become the dominant form of column liquid chromatography. 92 refs., 4 figs.

  11. Terrestiral plant biopolymers in marine sediments

    Energy Technology Data Exchange (ETDEWEB)

    Gough, M.A.; Fauzi, R.; Mantoura, C. (Plymouth Marine Lab. (United Kingdom)); Preston, M. (Univ. of Liverpool (United Kingdom))

    1993-03-01

    The vascular land plant biopolymers lignin and cutin were surveyed in the surface sediments of coastal and open ocean waters by controlled alkaline CuO oxidation/reaction. Two contrasting oceanic regimes were studied: the northwest Mediterranean (NWM) Sea, which receives significant particulate terrigenous debris through riverine discharge; and the northeast Atlantic (NEA) Ocean, with poorly characterized terrestrial carbon inputs. In the NWM products of lignin and cutin co-occurred at all stations, elevated levels (ca. 0.5-3.0 mg lignin phenols/100 mg organic carbon; ca. 0.01-0.09 mg cutin acids/100 mg organic carbon) were observed for near-shore deltaic and shelf sediments. The influence of terrestrial land plant inputs extended across the shelf and through the slope to the abyssal plain, providing molecular evidence for advective offshore transfer of terrestrial carbon. Mass balance estimates for the basin suggest riverine inputs account for the majority of surface sedimentary ligin/cutin, most of which (>90%) is deposited on the shelf. Products of CuO oxidation of lignin and cutin were also detected in NEA surface sediments, at levels comparable to those observed for the NWM continental slope, and were detectable at low concentrations in the sediments of the abyssal plains (>4,000 m depth). While atmospheric deposition of lignin/cutin-derived material cannot be discounted in this open ocean system, lateral advective transfer of enriched shelf sediments is inferred as a possible transport process. A progressive enrichment in cutin-derived material relative to lignin was observed offshore, with evidence of an increase in the degree of oxidative alteration of lignin residues. Preliminary mass balance calculations applied to the global ocean margin suggest riverine sources of both particulate lignin and cutin are important and that most (>95%) deposition of recognizable land plant biopolymers occurs in shelf seas. 74 refs., 7 figs., 5 tabs.

  12. End-of-life of starch-polyvinyl alcohol biopolymers.

    Science.gov (United States)

    Guo, M; Stuckey, D C; Murphy, R J

    2013-01-01

    This study presents a life cycle assessment (LCA) model comparing the waste management options for starch-polyvinyl alcohol (PVOH) biopolymers including landfill, anaerobic digestion (AD), industrial composting and home composting. The ranking of biological treatment routes for starch-PVOH biopolymer wastes depended on their chemical compositions. AD represents the optimum choice for starch-PVOH biopolymer containing N and S elements in global warming potential (GWP(100)), acidification and eutrophication but not on the remaining impact categories, where home composting was shown to be a better option due to its low energy and resource inputs. For those starch-PVOH biopolymers with zero N and S contents home composting delivered the best environmental performance amongst biological treatment routes in most impact categories (except for GWP(100)). The landfill scenario performed generally well due largely to the 100-year time horizon and efficient energy recovery system modeled but this good performance is highly sensitive to assumptions adopted in landfill model.

  13. Sequence-Dependent Effects on the Properties of Semiflexible Biopolymers

    CERN Document Server

    Zicong, Bela

    2008-01-01

    Using path integral technique, we show exactly that for a semiflexible biopolymer in constant extension ensemble, no matter how long the polymer and how large the external force, the effects of short range correlations in the sequence-dependent spontaneous curvatures and torsions can be incorporated into a model with well-defined mean spontaneous curvature and torsion as well as a renormalized persistence length. Moreover, for a long biopolymer with large mean persistence length, the sequence-dependent persistence lengths can be replaced by their mean. However, for a short biopolymer or for a biopolymer with small persistence lengths, inhomogeneity in persistence lengths tends to make physical observables very sensitive to details and therefore less predictable.

  14. Dynamic Mechanical Properties of Bio-Polymer Graphite Thin Films

    Science.gov (United States)

    Saddam Kamarudin, M.; Rus, Anika Zafiah M.; Munirah Abdullah, Nur; Abdullah, M. F. L.

    2017-08-01

    Waste cooking oil is used as the main substances in producing graphite biopolymer thin films. Biopolymer is produce from the reaction of bio-monomer and cross linker with the ratio of 2:1 and addition of graphite with an increment of 2% through a slip casting method. The morphological surface properties of the samples are observed by using Scanning Electron Microscope (SEM). It is shown that the graphite particle is well mixed and homogenously dispersed in biopolymer matrix. Meanwhile, the mechanical response of materials by monitoring the change in the material properties in terms of frequency and temperature of the samples were determined using Dynamic Mechanical Analysis (DMA). The calculated cross-linked density of biopolymer composites revealed the increment of graphite particle loading at 8% gives highest results with 260.012 x 103 M/m3.

  15. Laser-induced periodic surface structuring of biopolymers

    Science.gov (United States)

    Pérez, Susana; Rebollar, Esther; Oujja, Mohamed; Martín, Margarita; Castillejo, Marta

    2013-03-01

    We report here on a systematic study about the formation of laser-induced periodic surface structures (LIPSS) on biopolymers. Self-standing films of the biopolymers chitosan, starch and the blend of chitosan with the synthetic polymer poly (vinyl pyrrolidone), PVP, were irradiated in air with linearly polarized laser beams at 193, 213 and 266 nm, with pulse durations in the range of 6-17 ns. The laser-induced periodic surface structures were topographically characterized by atomic force microscopy and the chemical modifications induced by laser irradiation were inspected via Raman spectroscopy. Formation of LIPSS parallel to the laser polarization direction, with periods similar to the laser wavelength, was observed at efficiently absorbed wavelengths in the case of the amorphous biopolymer chitosan and its blend with PVP, while formation of LIPSS is prevented in the crystalline starch biopolymer.

  16. Cyclic phosphonium ionic liquids

    Directory of Open Access Journals (Sweden)

    Sharon I. Lall-Ramnarine

    2014-01-01

    Full Text Available Ionic liquids (ILs incorporating cyclic phosphonium cations are a novel category of materials. We report here on the synthesis and characterization of four new cyclic phosphonium bis(trifluoromethylsulfonylamide ILs with aliphatic and aromatic pendant groups. In addition to the syntheses of these novel materials, we report on a comparison of their properties with their ammonium congeners. These exemplars are slightly less conductive and have slightly smaller self-diffusion coefficients than their cyclic ammonium congeners.

  17. Using biopolymers to remove heavy metals from soil and water

    Energy Technology Data Exchange (ETDEWEB)

    Krishnamurthy, S.; Frederick, R.M.

    1993-11-19

    Chemical remediation of soil may involve the use of harsh chemicals that generate waste streams, which may adversely affect the soil's integrity and ability to support vegetation. This article reviews the potential use of benign reagents, such as biopolymers, to extract heavy metals. The biopolymers discussed are chitin and chitosan, modified starch, cellulose, and polymer-containing algae. (Copyright (c) Remediation 1994.)

  18. POSS-Modified Cellulose for Improved Biopolymer Performance

    Science.gov (United States)

    2011-09-30

    E7(/(3+21(180%(5 ,QFOXGHDUHDFRGH 09-30-2011 Final Technical 07-01-2010 to 06-30-2011 POSS-Modified Cellulose for Improved Biopolymer ... Biopolymer Performance” (AFOSR-DURIP Grant #FA9550-10-1-0323) DATE: September 30, 2011 Summary Funding for this project was used to purchase...promise in biomedical applications, such as medical implants, surgical sutures, and tissue scaffolding . To improve the low impact strength, poor

  19. Applications of biopolymers and synthetic polymers blends: literature review

    OpenAIRE

    Lady Joana Rodríguez Sepúlveda; Carlos Eduardo Orrego Alzate

    2016-01-01

    Biopolymers are biodegradable commonly, fragile, hydrophilic and have low thermal resistance, which has limited its commercial application. In contrast, synthetic polymers or derived from non-renewable resources generally lower cost and limited or minimal biodegradability, have good mechanical and thermal characteristics. The blend of biopolymers and synthetic polymers provides materials with properties and reasonable costs for certain applications. This article is a literature review on the ...

  20. Biopolymers and supramolecular polymers as biomaterials for biomedical applications

    OpenAIRE

    Freeman, Ronit; Boekhoven, Job; Dickerson, Matthew B.; Naik, Rajesh R.; Stupp, Samuel I.

    2015-01-01

    Protein- and peptide-based structural biopolymers are abundant building blocks of biological systems. Either in their natural forms, such as collagen, silk or fibronectin, or as related synthetic materials they can be used in various technologies. An emerging area is that of biomimetic materials inspired by protein-based biopolymers, which are made up of small molecules rather than macromolecules and can therefore be described as supramolecular polymers. These materials are very useful in bio...

  1. Effect of ozone on biopolymers in biofiltration and ultrafiltration processes.

    Science.gov (United States)

    Siembida-Lösch, Barbara; Anderson, William B; Wang, Yulang Michael; Bonsteel, Jane; Huck, Peter M

    2015-03-01

    The focus of this full-scale study was to determine the effect of ozone on biopolymer concentrations in biofiltration and ultrafiltration (UF) processes treating surface water from Lake Ontario. Ozonation was out of service for maintenance for 9 months, hence, it was possible to investigate ozone's action on biologically active carbon contactors (BACCs) and UF, in terms of biopolymer removal. Given the importance of biopolymers for fouling, this fraction was quantified using a chromatographic technique. Ozone pre-treatment was observed to positively impact the active biomass in biofilters. However, since an increase of the active biomass did not result in higher biopolymer removal, active biomass concentration cannot be a surrogate for biofiltration performance. It was evident that increasing empty bed contact time (EBCT) from 4 to 19 min only had a positive effect on biopolymer removal through BACCs when ozone was out of service. However, as a mass balance experiment showed, ozone-free operation resulted in higher deposition of biopolymers on a UF membrane and slight deterioration in its performance.

  2. Equilibrium & Nonequilibrium Fluctuation Effects in Biopolymer Networks

    Science.gov (United States)

    Kachan, Devin Michael

    Fluctuation-induced interactions are an important organizing principle in a variety of soft matter systems. In this dissertation, I explore the role of both thermal and active fluctuations within cross-linked polymer networks. The systems I study are in large part inspired by the amazing physics found within the cytoskeleton of eukaryotic cells. I first predict and verify the existence of a thermal Casimir force between cross-linkers bound to a semi-flexible polymer. The calculation is complicated by the appearance of second order derivatives in the bending Hamiltonian for such polymers, which requires a careful evaluation of the the path integral formulation of the partition function in order to arrive at the physically correct continuum limit and properly address ultraviolet divergences. I find that cross linkers interact along a filament with an attractive logarithmic potential proportional to thermal energy. The proportionality constant depends on whether and how the cross linkers constrain the relative angle between the two filaments to which they are bound. The interaction has important implications for the synthesis of biopolymer bundles within cells. I model the cross-linkers as existing in two phases: bound to the bundle and free in solution. When the cross-linkers are bound, they behave as a one-dimensional gas of particles interacting with the Casimir force, while the free phase is a simple ideal gas. Demanding equilibrium between the two phases, I find a discontinuous transition between a sparsely and a densely bound bundle. This discontinuous condensation transition induced by the long-ranged nature of the Casimir interaction allows for a similarly abrupt structural transition in semiflexible filament networks between a low cross linker density isotropic phase and a higher cross link density bundle network. This work is supported by the results of finite element Brownian dynamics simulations of semiflexible filaments and transient cross-linkers. I

  3. Affordable Cyclic Voltammetry

    Science.gov (United States)

    Stewart, Greg; Kuntzleman, Thomas S.; Amend, John R.; Collins, Michael J.

    2009-01-01

    Cyclic voltammetry is an important component of the undergraduate chemical curriculum. Unfortunately, undergraduate students rarely have the opportunity to conduct experiments in cyclic voltammetry owing to the high cost of potentiostats, which are required to control these experiments. By using MicroLab data acquisition interfaces in conjunction…

  4. Affordable Cyclic Voltammetry

    Science.gov (United States)

    Stewart, Greg; Kuntzleman, Thomas S.; Amend, John R.; Collins, Michael J.

    2009-01-01

    Cyclic voltammetry is an important component of the undergraduate chemical curriculum. Unfortunately, undergraduate students rarely have the opportunity to conduct experiments in cyclic voltammetry owing to the high cost of potentiostats, which are required to control these experiments. By using MicroLab data acquisition interfaces in conjunction…

  5. Cyclic anamorphic cosmology

    CERN Document Server

    Ijjas, Anna

    2016-01-01

    Cyclic models of the universe have the advantage of avoiding initial conditions problems related to postulating any sort of beginning in time. To date, the only known viable examples of cyclic models have been ekpyrotic. In this paper, we show that the recently proposed anamorphic scenario can also be made cyclic. The key to the cyclic completion is a classically stable, non-singular bounce. Remarkably, even though the bounce construction was originally developed to connect a period of contraction with a period of expansion both described by Einstein gravity, we show here that it can naturally be modified to connect an ordinary contracting phase described by Einstein gravity with a phase of anamorphic smoothing. The paper will present the basic principles and steps in constructing cyclic anamorphic models.

  6. Actinide Corroles: Synthesis and Characterization of Thorium(IV) and Uranium(IV) bis(-chloride) Dimers

    Energy Technology Data Exchange (ETDEWEB)

    Ward, Ashleigh L.; Buckley, Heather L.; Gryko, Daniel T.; Lukens, Wayne W.; Arnold, John

    2013-12-01

    The first synthesis and structural characterization of actinide corroles is presented. Thorium(IV) and uranium(IV) macrocycles of Mes2(p-OMePh)corrole were synthesised and characterized by single-crystal X-ray diffraction, UV-Visible spectroscopy, variable-temperature 1H NMR, ESI mass spectrometry and cyclic voltammetry.

  7. Formatting and ligating biopolymers using adjustable nanoconfinement

    Science.gov (United States)

    Berard, Daniel J.; Shayegan, Marjan; Michaud, Francois; Henkin, Gil; Scott, Shane; Leslie, Sabrina

    2016-07-01

    Sensitive visualization and conformational control of long, delicate biopolymers present critical challenges to emerging biotechnologies and biophysical studies. Next-generation nanofluidic manipulation platforms strive to maintain the structural integrity of genomic DNA prior to analysis but can face challenges in device clogging, molecular breakage, and single-label detection. We address these challenges by integrating the Convex Lens-induced Confinement (CLiC) technique with a suite of nanotopographies embedded within thin-glass nanofluidic chambers. We gently load DNA polymers into open-face nanogrooves in linear, concentric circular, and ring array formats and perform imaging with single-fluorophore sensitivity. We use ring-shaped nanogrooves to access and visualize confinement-enhanced self-ligation of long DNA polymers. We use concentric circular nanogrooves to enable hour-long observations of polymers at constant confinement in a geometry which eliminates the confinement gradient which causes drift and can alter molecular conformations and interactions. Taken together, this work opens doors to myriad biophysical studies and biotechnologies which operate on the nanoscale.

  8. Rotational molding of bio-polymers

    Science.gov (United States)

    Greco, Antonio; Maffezzoli, Alfonso; Forleo, Stefania

    2014-05-01

    This paper is aimed to study the suitability of bio-polymers, including poly-lactic acid (PLLA) and Mater-Bi, for the production of hollow components by rotational molding. In order to reduce the brittleness of PLLA, the material was mixed with two different plasticizers, bis-ethyl-hexyl-phthalate (DEHP) and poly-ethylene-glycol (PEG). The materials were characterized in terms of sinterability. To this purpose, thermomechanical (TMA) analysis was performed at different heating rates, in order to identify the endset temperatures of densification and the onset temperatures of degradation. Results obtained indicated that the materials are characterized by a very fast sintering process, occurring just above the melting temperature, and an adequately high onset of degradation. The difference between the onset of degradation and the endset of sintering, defined as the processing window of the polymer, is sufficiently wide, indicating that the polymers can be efficiently processed by rotational molding. Therefore, a laboratory scale apparatus was used for the production of PLLA and Mater-Bi prototypes. The materials were processed using very similar conditions to those used for LLDPE. The production of void-free samples of uniform wall thickness was considered as an indication of the potentiality of the process for the production of biodegradable containers.

  9. Customizable Biopolymers for Heavy Metal Remediation

    Energy Technology Data Exchange (ETDEWEB)

    Kostal, Jan; Prabhukumar, Giridhar; Lao, U. Loi; Chen Alin; Matsumoto, Mark; Mulchandani, Ashok; Chen, Wilfred [University of California, Department of Chemical and Environmental Engineering (United States)], E-mail: wilfred@engr.ucr.edu

    2005-10-15

    Nanoscale materials have been gaining increasing interest in the area of environmental remediation because of their unique physical, chemical and biological properties. One emerging area of research has been the development of novel materials with increased affinity, capacity, and selectivity for heavy metals because conventional technologies are often inadequate to reduce concentrations in wastewater to acceptable regulatory standards. Genetic and protein engineering have emerged as the latest tools for the construction of nanoscale materials that can be controlled precisely at the molecular level. With the advent of recombinant DNA techniques, it is now possible to create 'artificial' protein polymers with fundamentally new molecular organization. The most significant feature of these nanoscale biopolymers is that they are specifically pre-programmed within a synthetic gene template and can be controlled precisely in terms of sizes, compositions and functions at the molecular level. In this review, the use of specifically designed protein-based nano-biomaterials with both metal-binding and tunable properties for heavy metal removal is summarized. Several different strategies for the selective removal of heavy metals such as cadmium and mercury are highlighted.

  10. Cyclic nucleotide phosphodiesterase isoenzymes in guinea-pig tracheal muscle and bronchorelaxation by alkylxanthines.

    Science.gov (United States)

    Miyamoto, K; Kurita, M; Sakai, R; Sanae, F; Wakusawa, S; Takagi, K

    1994-09-15

    In this study the phosphodiesterase (PDE) isoenzymes in guinea-pig trachealis smooth muscle were separated by DEAE-Sepharose anion exchange chromatography, identified, and characterized. Furthermore the effect of theophylline and 1-n-butyl-3-n-propylxanthine (BPX) on the isolated PDE isoenzymes and on their tracheal relaxant effect were investigated and compared with the nonxanthine PDE inhibitors amrinone and Ro 20-1724. We identified five distinct isoenzymes in guinea-pig tracheal muscle; calcium/calmodulin-stimulated cyclic AMP PDE (PDE I), cyclic GMP-stimulated cyclic AMP PDE (PDE II), cyclic GMP-inhibited and amrinone-sensitive cyclic AMP PDE (PDE III), cyclic AMP-specific and Ro 20-1724-sensitive PDE (PDE IV), and cyclic GMP-specific PDE (PDE V). BPX strongly inhibited the PDE IV isoenzyme with high selectivity, while the inhibitory effect of theophylline was weak. The PDE IV inhibitors BPX and Ro 20-1724 synergistically increased the relaxant effect of the beta 2-adrenoceptor agonist salbutamol in carbachol-contracted trachea much more strongly than theophylline. In contrast, amrinone, a PDE III inhibitor, hardly influenced the relaxant effect of salbutamol, suggesting that the PDE IV isoenzyme is functionally associated with beta 2-adrenoceptors in guinea-pig trachea and that inhibition of this enzyme potentiates the ability of salbutamol to increase the intracellular cyclic AMP content. These results indicate that the PDE IV isoenzyme plays a significant role in alkylxanthine-mediated relaxation of guinea-pig trachea.

  11. Conformon-driven biopolymer shape changes in cell modeling.

    Science.gov (United States)

    Ji, Sungchul; Ciobanu, Gabriel

    2003-07-01

    Conceptual models of the atom preceded the mathematical model of the hydrogen atom in physics in the second decade of the 20th century. The computer modeling of the living cell in the 21st century may follow a similar course of development. A conceptual model of the cell called the Bhopalator was formulated in the mid-1980s, along with its twin theories known as the conformon theory of molecular machines and the cell language theory of biopolymer interactions [Ann. N.Y. Acad. Sci. 227 (1974) 211; BioSystems 44 (1997) 17; Ann. N.Y. Acad. Sci. 870 (1999a) 411; BioSystems 54 (2000) 107; Semiotica 138 (1-4) (2002a) 15; Fundamenta Informaticae 49 (2002b) 147]. The conformon theory accounts for the reversible actions of individual biopolymers coupled to irreversible chemical reactions, while the cell language theory provides a theoretical framework for understanding the complex networks of dynamic interactions among biopolymers in the cell. These two theories are reviewed and further elaborated for the benefit of both computational biologists and computer scientists who are interested in modeling the living cell and its functions. One of the critical components of the mechanisms of cell communication and cell computing has been postulated to be space- and time-organized teleonomic (i.e. goal-directed) shape changes of biopolymers that are driven by exergonic (free energy-releasing) chemical reactions. The generalized Franck-Condon principle is suggested to be essential in resolving the apparent paradox arising when one attempts to couple endergonic (free energy-requiring) biopolymer shape changes to the exergonic chemical reactions that are catalyzed by biopolymer shape changes themselves. Conformons, defined as sequence-specific mechanical strains of biopolymers first invoked three decades ago to account for energy coupling in mitochondria, have been identified as shape changers, the agents that cause shape changes in biopolymers. Given a set of space- and time

  12. Permeability Modification Using a Reactive Alkaline-Soluble Biopolymer

    Energy Technology Data Exchange (ETDEWEB)

    Snadra L. Fox; X. Xie; K. D. Schaller; E. P. Robertson; G. A. Bala

    2003-10-01

    Polymer injection has been used in reservoirs to alleviate contrasting permeability zones. Current technology relies on the use of cross-linking agents to initiate gelation. The use of biological polymers are advantageous in that they can block high permeability areas, are environmentally friendly, and have potential to form reversible gels without the use of hazardous cross-linkers. Recent efforts at the Idaho National Engineering and Environmental Laboratory (INEEL) have produced a reactive alkaline-soluble biopolymer from Agrobacterium sp. ATCC no. 31749 that gels upon decreasing the pH of the polymeric solution. The focus of this study was to determine the impact an alkaline-soluble biopolymer can have on sandstone permeability. Permeability modification was investigated by injecting solubilized biopolymer into Berea sandstone cores and defining the contribution of pH, salt, temperature, and Schuricht crude oil on biopolymer gelation. The biopolymer was soluble in KOH at a pH greater than 11.4 and gelled when the pH dropped below 10.8. The Berea sandstone core buffered the biopolymer solution, decreasing the pH sufficiently to form a gel, which subsequently decreased the permeability. The effluent pH of the control cores injected with 0.01 {und M} KOH (pH 12.0) and 0.10{und M} KOH (pH 13.0) decreased to 10.6 and 12.7, respectively. The permeability of the sandstone core injected with biopolymer was decreased to greater than 95% of the original permeability at 25 C in the presence of 2% NaCl, and Schuricht crude oil; however, the permeability increased when the temperature of the core was increased to 60 C. Residual resistance factors as high as 792 were seen in Berea cores treated with biopolymer. The buffering capacity of sandstone has been demonstrated to reduce the pH of a biopolymer solution sufficiently to cause the polymer to form a stable in-situ gel. This finding could potentially lead to alternate technology for permeability modification, thus

  13. Coupled actin-lamin biopolymer networks and protecting DNA

    Science.gov (United States)

    Zhang, Tao; Rocklin, D. Zeb; Mao, Xiaoming; Schwarz, J. M.

    The mechanical properties of cells are largely determined by networks of semiflexible biopolymers forming the cytoskeleton. Similarly, the mechanical properties of cell nuclei are also largely determined by networks of semiflexible biopolymers forming the nuclear cytoskeleton. In particular, a network of filamentous lamin sits just inside the inner nuclear membrane to presumably protect the heart of the cell nucleus--the DNA. It has been demonstrated over the past decade that the actin cytoskeletal biopolymer network and the lamin biopolymer network are coupled via a sequence of proteins bridging the outer and inner nuclear membranes, known as the LINC complex. We, therefore, probe the consequences of such a coupling in a model biopolymer network system via numerical simulations to understand the resulting deformations in the lamin network in response to perturbations in the actin cytoskeletal network. We find, for example, that the force transmission across the coupled system can depend sensitively on the concentration of LINC complexes. Such study could have implications for mechanical mechanisms of the regulation of transcription since DNA couples to lamin via lamin-binding domains so that deformations in the lamin network may result in deformations in the DNA.

  14. Biopolymers as transdermal drug delivery systems in dermatology therapy.

    Science.gov (United States)

    Basavaraj, K H; Johnsy, George; Navya, M A; Rashmi, R; Siddaramaiah

    2010-01-01

    The skin is considered a complex organ for drug delivery because of its structure. Drug delivery systems are designed for the controlled release of drugs through the skin into the systemic circulation, maintaining consistent efficacy and reducing the dose of the drugs and their related side effects. Transdermal drug delivery represents one of the most rapidly advancing areas of novel drug delivery. The excellent impervious nature of the skin is the greatest challenge that must be overcome for successful drug delivery. Today, polymers have been proven to be successful for long-term drug delivery applications as no single polymer can satisfy all of the requirements. Biopolymers in the field of dermal application are rare and the mechanisms that affect skin absorption are almost unknown. Biopolymers are widely used as drug delivery systems, but as such the use of biopolymers as drug delivery systems in dermatologic therapy is still in progress. Commonly used biopolymers include hydrocolloids, alginates, hydrogels, polyurethane, collagen, poly(lactic-co-glycolic acid), chitosan, proteins and peptides, pectin, siRNAs, and hyaluronic acid. These new and exciting methods for drug delivery are already increasing the number and quality of dermal and transdermal therapies. This article reviews current research on biopolymers and focuses on their potential as drug carriers, particularly in relation to the dermatologic aspects of their use.

  15. Force spectroscopy of complex biopolymers with heterogeneous elasticity

    Science.gov (United States)

    Valdman, David; Lopez, Benjamin J.

    2013-01-01

    Cellular biopolymers can exhibit significant compositional heterogeneities as a result of the non-uniform binding of associated proteins, the formation of microstructural defects during filament assembly, or the imperfect bundling of filaments into composite structures of variable diameter. These can lead to significant variations in the local mechanical properties of biopolymers along their length. Existing spectral analysis methods assume filament homogeneity and therefore report only a single average stiffness for the entire filament. However, understanding how local effects modulate biopolymer mechanics in a spatially resolved manner is essential to understanding how binding and bundling proteins regulate biopolymer stiffness and function in cellular contexts. Here, we present a new method to determine the spatially varying material properties of individual complex biopolymers from the observation of passive thermal fluctuations of the filament conformation. We develop new statistical mechanics-based approaches for heterogeneous filaments that estimate local bending elasticities as a function of the filament arc-length. We validate this methodology using simulated polymers with known stiffness distributions, and find excellent agreement between derived and expected values. We then determine the bending elasticity of microtubule filaments of variable composition generated by repeated rounds of tubulin polymerization using either GTP or GMPCPP, a nonhydrolyzable GTP analog. Again, we find excellent agreement between mechanical and compositional heterogeneities. PMID:24049545

  16. Quantitative analysis of biopolymers by matrix-assisted laser desorption

    Energy Technology Data Exchange (ETDEWEB)

    Tang, K.; Allman, S.L.; Jones, R.B.; Chen, C.H. (Oak Ridge National Lab., TN (United States))

    1993-08-01

    During the past few years, major efforts have been made to use mass spectrometry to measure biopolymers because of the great potential benefit to biological and medical research. Although the theoretical details of laser desorption and ionization mechanisms of MALDI are not yet fully understood, several models have been presented to explain the production of large biopolymer ions. In brief, it is very difficult to obtain reliable measurements of the absolute quantity of analytes by MALDI. If MALDI is going to become a routine analytical tool, it is obvious that quantitative measurement capability must be pursued. Oligonucleotides and protein samples used in this work were purchased from commercial sources. Nicotinic acid was used as matrix for both types of biopolymers. From this experiment, it is seen that it is difficult to obtain absolute quantitative measurements of biopolymers using MALDI. However, internal calibration with molecules having similar chemical properties can be used to resolve these difficulties. Chemical reactions between biopolymers must be avoided to prevent the destruction of the analyte materials. 10 refs., 8 figs.

  17. Asteroids IV

    Science.gov (United States)

    Michel, Patrick; DeMeo, Francesca E.; Bottke, William F.

    . Asteroids, like planets, are driven by a great variety of both dynamical and physical mechanisms. In fact, images sent back by space missions show a collection of small worlds whose characteristics seem designed to overthrow our preconceived notions. Given their wide range of sizes and surface compositions, it is clear that many formed in very different places and at different times within the solar nebula. These characteristics make them an exciting challenge for researchers who crave complex problems. The return of samples from these bodies may ultimately be needed to provide us with solutions. In the book Asteroids IV, the editors and authors have taken major strides in the long journey toward a much deeper understanding of our fascinating planetary ancestors. This book reviews major advances in 43 chapters that have been written and reviewed by a team of more than 200 international authorities in asteroids. It is aimed to be as comprehensive as possible while also remaining accessible to students and researchers who are interested in learning about these small but nonetheless important worlds. We hope this volume will serve as a leading reference on the topic of asteroids for the decade to come. We are deeply indebted to the many authors and referees for their tremendous efforts in helping us create Asteroids IV. We also thank the members of the Asteroids IV scientific organizing committee for helping us shape the structure and content of the book. The conference associated with the book, "Asteroids Comets Meteors 2014" held June 30-July 4, 2014, in Helsinki, Finland, did an outstanding job of demonstrating how much progress we have made in the field over the last decade. We are extremely grateful to our host Karri Muinonnen and his team. The editors are also grateful to the Asteroids IV production staff, namely Renée Dotson and her colleagues at the Lunar and Planetary Institute, for their efforts, their invaluable assistance, and their enthusiasm; they made life as

  18. Biopolymers for sample collection, protection, and preservation.

    Science.gov (United States)

    Sorokulova, Iryna; Olsen, Eric; Vodyanoy, Vitaly

    2015-07-01

    One of the principal challenges in the collection of biological samples from air, water, and soil matrices is that the target agents are not stable enough to be transferred from the collection point to the laboratory of choice without experiencing significant degradation and loss of viability. At present, there is no method to transport biological samples over considerable distances safely, efficiently, and cost-effectively without the use of ice or refrigeration. Current techniques of protection and preservation of biological materials have serious drawbacks. Many known techniques of preservation cause structural damages, so that biological materials lose their structural integrity and viability. We review applications of a novel bacterial preservation process, which is nontoxic and water soluble and allows for the storage of samples without refrigeration. The method is capable of protecting the biological sample from the effects of environment for extended periods of time and then allows for the easy release of these collected biological materials from the protective medium without structural or DNA damage. Strategies for sample collection, preservation, and shipment of bacterial, viral samples are described. The water-soluble polymer is used to immobilize the biological material by replacing the water molecules within the sample with molecules of the biopolymer. The cured polymer results in a solid protective film that is stable to many organic solvents, but quickly removed by the application of the water-based solution. The process of immobilization does not require the use of any additives, accelerators, or plastifiers and does not involve high temperature or radiation to promote polymerization.

  19. Synthetic and Biopolymer Gels - Similarities and Difference.

    Science.gov (United States)

    Horkay, Ferenc

    2006-03-01

    Ion exchange plays a central role in a variety of physiological processes, such as nerve excitation, muscle contraction and cell locomotion. Hydrogels can be used as model systems for identifying fundamental chemical and physical interactions that govern structure formation, phase transition, etc. in biopolymer systems. Polyelectrolyte gels are particularly well-suited to study ion-polymer interactions because their structure and physical-chemical properties (charge density, crosslink density, etc) can be carefully controlled. They are sensitive to different external stimuli such as temperature, ionic composition and pH. Surprisingly few investigations have been made on polyelectrolyte gels in salt solutions containing both monovalent and multivalent cations. We have developed an experimental approach that combines small angle neutron scattering and osmotic swelling pressure measurements. The osmotic pressure exerted on a macroscopic scale is a consequence of changes occurring at a molecular level. The intensity of the neutron scattering signal, which provides structural information as a function of spatial resolution, is directly related to the osmotic pressure. We have found a striking similarity in the scattering and osmotic behavior of polyacrylic acid gels and DNA gels swollen in nearly physiological salt solutions. Addition of calcium ions to both systems causes a sudden volume change. This volume transition, which occurs when the majority of the sodium counterions are replaced by calcium ions, is reversible. Such reversibility implies that the calcium ions are not strongly bound by the polyanion, but are free to move along the polymer chain, which allows these ions to form temporary bridges between negative charges on adjacent chains. Mechanical measurements reveal that the elastic modulus is practically unchanged in the calcium-containing gels, i.e., ion bridging is qualitatively different from covalent crosslinks.

  20. Real Topological Cyclic Homology

    DEFF Research Database (Denmark)

    Høgenhaven, Amalie

    The main topics of this thesis are real topological Hochschild homology and real topological cyclic homology. If a ring or a ring spectrum is equipped with an anti-involution, then it induces additional structure on the topological Hochschild homology spectrum. The group O(2) acts on the spectrum......, where O(2) is the semi-direct product of T, the multiplicative group of complex number of modulus 1, by the group G=Gal(C/R). We refer to this O(2)-spectrum as the real topological Hochschild homology. This generalization leads to a G-equivariant version of topological cyclic homology, which we call...... real topological cyclic homology. The first part of the thesis computes the G-equivariant homotopy type of the real topological cyclic homology of spherical group rings at a prime p with anti-involution induced by taking inverses in the group. The second part of the thesis investigates the derived G...

  1. Fabrication of Porous Materials from Natural/Synthetic Biopolymers and Their Composites

    OpenAIRE

    Udeni Gunathilake T.M. Sampath; Yern Chee Ching; Cheng Hock Chuah; Johari J. Sabariah; Pai-Chen Lin

    2016-01-01

    Biopolymers and their applications have been widely studied in recent years. Replacing the oil based polymer materials with biopolymers in a sustainable manner might give not only a competitive advantage but, in addition, they possess unique properties which cannot be emulated by conventional polymers. This review covers the fabrication of porous materials from natural biopolymers (cellulose, chitosan, collagen), synthetic biopolymers (poly(lactic acid), poly(lactic-co-glycolic acid)) and the...

  2. Cup products in Hopf cyclic cohomology via cyclic modules I

    CERN Document Server

    Rangipour, Bahram

    2007-01-01

    This is the first one in a series of two papers on the continuation of our study in cup products in Hopf cyclic cohomology. In this note we construct cyclic cocycles of algebras out of Hopf cyclic cocycles of algebras and coalgebras. In the next paper we consider producing Hopf cyclic cocycle from "equivariant" Hopf cyclic cocycles. Our approach in both situations is based on (co)cyclic modules and bi(co)cyclic modules together with Eilenberg-Zilber theorem which is different from the old definition of cup products defined via traces and cotraces on DG algebras and coalgebras.

  3. Recovery of copper and cobalt by biopolymer gels.

    Science.gov (United States)

    Jang, L K; Lopez, S L; Eastman, S L; Pryfogle, P

    1991-02-05

    The recovery of copper from synthetic aqueous media circulating in a loop fluidized bed reactor operated batchwise was investigated by using the following biopolymer systems: (1) a viscous solution of sodium alginate (from kelp) dispensed directly into the reactor fluid containing dissolved copper (sulfate salt) at initial concentrations of 60-200 ppm, (2) partially coagulated calcium alginate spheres for absorbing dissolved copper at initial concentrations of 10-40 ppm, and (3) a mixture of green algae Microcystis and sodium alginate dispensed directly into the reactor fluid. The recovery of copper and cobalt, a strategic metal, from cobalt ore leachate was achieved by a two-step approach: direct dispensing of sodium alginate to absorb the bulk of metals followed by the addition of partially coagulated calcium alginate spheres to "polish" the leachate. Metal binding capacity and conditional stability constant of each biopolymer system as well as the effective diffusivity of cupric ion in the matrix of biopolymer gels are reported.

  4. Biopolymers and supramolecular polymers as biomaterials for biomedical applications.

    Science.gov (United States)

    Freeman, Ronit; Boekhoven, Job; Dickerson, Matthew B; Naik, Rajesh R; Stupp, Samuel I

    2015-12-01

    Protein- and peptide-based structural biopolymers are abundant building blocks of biological systems. Either in their natural forms, such as collagen, silk or fibronectin, or as related synthetic materials they can be used in various technologies. An emerging area is that of biomimetic materials inspired by protein-based biopolymers, which are made up of small molecules rather than macromolecules and can therefore be described as supramolecular polymers. These materials are very useful in biomedical applications because of their ability to imitate the extracellular matrix both in architecture and their capacity to signal cells. This article describes important features of the natural extracellular matrix and highlight how these features are being incorporated into biomaterials composed of biopolymers and supramolecular polymers. We particularly focus on the structures, properties, and functions of collagen, fibronectin, silk, and the supramolecular polymers inspired by them as biomaterials for regenerative medicine.

  5. Applications of biopolymers and synthetic polymers blends: literature review

    Directory of Open Access Journals (Sweden)

    Lady Joana Rodríguez Sepúlveda

    2016-08-01

    Full Text Available Biopolymers are biodegradable commonly, fragile, hydrophilic and have low thermal resistance, which has limited its commercial application. In contrast, synthetic polymers or derived from non-renewable resources generally lower cost and limited or minimal biodegradability, have good mechanical and thermal characteristics. The blend of biopolymers and synthetic polymers provides materials with properties and reasonable costs for certain applications. This article is a literature review on the main applications recently reported for the most important blends of biopolymers and biodegradable synthetic polymers. The literature search was performed with the "Tree of Science" tool and narratively. The results showed that mixtures of aliphatic and polysaccharide polymers are the most used in engineering applications biological tissues, control drug delivery and packaging industry.

  6. Optically controlled multiple switching operations of DNA biopolymer devices

    Energy Technology Data Exchange (ETDEWEB)

    Hung, Chao-You; Tu, Waan-Ting; Lin, Yi-Tzu [Institute of Photonics Technologies, National Tsing Hua University, Hsinchu 30013, Taiwan (China); Fruk, Ljiljana [Department of Chemical Engineering and Biotechnology, University of Cambridge, Pembroke Street, Cambridge CB2 3RA (United Kingdom); Hung, Yu-Chueh, E-mail: ychung@ee.nthu.edu.tw [Institute of Photonics Technologies, National Tsing Hua University, Hsinchu 30013, Taiwan (China); Department of Electrical Engineering, National Tsing Hua University, Hsinchu 30013, Taiwan (China)

    2015-12-21

    We present optically tunable operations of deoxyribonucleic acid (DNA) biopolymer devices, where a single high-resistance state, write-once read-many-times memory state, write-read-erase memory state, and single low-resistance state can be achieved by controlling UV irradiation time. The device is a simple sandwich structure with a spin-coated DNA biopolymer layer sandwiched by two electrodes. Upon irradiation, the electrical properties of the device are adjusted owing to a phototriggered synthesis of silver nanoparticles in DNA biopolymer, giving rise to multiple switching scenarios. This technique, distinct from the strategy of doping of pre-formed nanoparticles, enables a post-film fabrication process for achieving optically controlled memory device operations, which provides a more versatile platform to fabricate organic memory and optoelectronic devices.

  7. Cyclic polymers from alkynes

    Science.gov (United States)

    Roland, Christopher D.; Li, Hong; Abboud, Khalil A.; Wagener, Kenneth B.; Veige, Adam S.

    2016-08-01

    Cyclic polymers have dramatically different physical properties compared with those of their equivalent linear counterparts. However, the exploration of cyclic polymers is limited because of the inherent challenges associated with their synthesis. Conjugated linear polyacetylenes are important materials for electrical conductivity, paramagnetic susceptibility, optical nonlinearity, photoconductivity, gas permeability, liquid crystallinity and chain helicity. However, their cyclic analogues are unknown, and therefore the ability to examine how a cyclic topology influences their properties is currently not possible. We have solved this challenge and now report a tungsten catalyst supported by a tetraanionic pincer ligand that can rapidly polymerize alkynes to form conjugated macrocycles in high yield. The catalyst works by tethering the ends of the polymer to the metal centre to overcome the inherent entropic penalty of cyclization. Gel-permeation chromatography, dynamic and static light scattering, viscometry and chemical tests are all consistent with theoretical predictions and provide unambiguous confirmation of a cyclic topology. Access to a wide variety of new cyclic polymers is now possible by simply choosing the appropriate alkyne monomer.

  8. Conducting and non-conducting biopolymer composites produced by particle bonding

    Science.gov (United States)

    In this report, we introduce two types of processes for the production of biopolymer composites: one is fabricated by bonding biopolymers with corn protein or wheat protein and the other by bonding starch with a synthetic polymer. These two types of biopolymer composites make use of the strong bon...

  9. Models of the solvent-accessible surface of biopolymers

    Energy Technology Data Exchange (ETDEWEB)

    Smith, R.E.

    1996-09-01

    Many biopolymers such as proteins, DNA, and RNA have been studied because they have important biomedical roles and may be good targets for therapeutic action in treating diseases. This report describes how plastic models of the solvent-accessible surface of biopolymers were made. Computer files containing sets of triangles were calculated, then used on a stereolithography machine to make the models. Small (2 in.) models were made to test whether the computer calculations were done correctly. Also, files of the type (.stl) required by any ISO 9001 rapid prototyping machine were written onto a CD-ROM for distribution to American companies.

  10. The surface properties of biopolymer-coated fruit: A review

    Directory of Open Access Journals (Sweden)

    Diana Cristina Moncayo Martinez

    2012-10-01

    Full Text Available Environmental conservation concerns have led to research and development regarding biodegradable materials from biopolymers, leading to new formulations for edible films and coatings for preserving the quality of fresh fruit and vegetables. Determining fruit skin surface properties for a given coating solution has led to predicting coating efficiency. Wetting was studied by considering spreading, adhesion and cohesion and measuring the contact angle, thus optimising the coating formulation in terms of biopolymer, plasticiser, surfactant, antimicrobial and antioxidant concentration. This work reviews the equations for determining fruit surface properties by using polar and dispersive interaction calculations and by determining the contact angle.

  11. Length regulation of active biopolymers by molecular motors.

    Science.gov (United States)

    Johann, Denis; Erlenkämper, Christoph; Kruse, Karsten

    2012-06-22

    For biopolymers like cytoskeletal actin filaments and microtubules, assembly and disassembly are inherently dissipative processes. Molecular motors can affect the rates of subunit removal at filament ends. We introduce a driven lattice-gas model to study the effects of motor-induced depolymerization on the length of active biopolymers and find that increasing motor activity sharpens unimodal steady-state length distributions. Furthermore, for sufficiently fast moving motors, the relative width of the length distribution is determined only by the attachment rate of motors. Our results show how established molecular processes can be used to robustly regulate the size of cytoskeletal structures like mitotic spindles.

  12. Precision biopolymers from protein precursors for biomedical applications.

    Science.gov (United States)

    Kuan, Seah Ling; Wu, Yuzhou; Weil, Tanja

    2013-03-12

    The synthesis of biohybrid materials with tailored functional properties represents a topic of emerging interest. Combining proteins as natural, macromolecular building blocks, and synthetic polymers opens access to giant brush-like biopolymers of high structural definition. The properties of these precision polypeptide copolymers can be tailored through various chemical modifications along their polypeptide backbone, which expands the repertoire of known protein-based materials to address biomedical applications. In this article, the synthetic strategies for the design of precision biopolymers from proteins through amino acid specific conjugation reagents are highlighted and the different functionalization strategies, their characterization, and applications are discussed.

  13. Nonlinearities of biopolymer gels increase the range of force transmission

    Science.gov (United States)

    Xu, Xinpeng; Safran, Samuel A.

    2015-09-01

    We present a model of biopolymer gels that includes two types of elastic nonlinearities, stiffening under extension and softening (due to buckling) under compression, to predict the elastic anisotropy induced by both external as well as internal (e.g., due to cell contractility) stresses in biopolymer gels. We show how the stretch-induced anisotropy and the strain-stiffening nonlinearity increase both the amplitude and power-law range of transmission of internal, contractile, cellular forces, and relate this to recent experiments.

  14. Solid state NMR of biopolymers and synthetic polymers

    Energy Technology Data Exchange (ETDEWEB)

    Jelinski, Lynn W. [Cornell Univ., Geneva, NY (United States)

    1995-12-31

    Solid state NMR has been invaluable in evaluating the structure, phase separation, and dynamics of polymers. Because polymers are generally used in the solid state, solid state NMR is especially powerful because it provides information about the materials in their native state. This review gives a general overview of solid state NMR, concentrating on solid state {sup 13} C and {sup 2} H NMR. It then focuses on two examples: the biopolymer spider silka and the engineering material polyurethane. It illustrates how solid state NMR can provide new information about synthetic and bio-polymers. (author) 11 refs., 5 figs., 3 tabs.

  15. Micromechanical sensors for the measurement of biopolymer degradation

    DEFF Research Database (Denmark)

    Keller, Stephan Sylvest; Gammelgaard, Lene; Jensen, M P

    2011-01-01

    We present microcantilever-based sensors for the characterization of biopolymer degradation by enzymes. Thin films of Poly(L-lactide) (PLLA) were spray-coated onto SU-8 cantilevers with well-known material properties and dimensions. The micromechanical sensors were immersed in solutions of protei......We present microcantilever-based sensors for the characterization of biopolymer degradation by enzymes. Thin films of Poly(L-lactide) (PLLA) were spray-coated onto SU-8 cantilevers with well-known material properties and dimensions. The micromechanical sensors were immersed in solutions...

  16. Semiflexible biopolymers: Microrheology and single filament condensation

    Science.gov (United States)

    Schnurr, Bernhard

    Polymers and their elementary subunits, called monomers, come in an immense variety of structures and sizes, and are of great importance for their material properties as well as a multitude of biological functions. The emphasis here is on semiflexible polymers, which are identified by their intermediate degree of stiffness. Their individual as well as their collective properties when assembled into entangled networks is a topic of great interest to polymer physics, materials science, and biology. Some of the most important semiflexible polymers are biopolymers, with such prominent examples as DNA, F-actin, and microtubules. Their functions range from their use as structural elements in the cytoskeleton of most plant and animal cells, to their role as transport tracks for molecular motors, and the storage of genetic information in their linear sequence. The two parts of this experimental and theoretical thesis address single filament aspects as well as network properties of solutions of semiflexible polymers. In the first part, we describe an optical technique for measuring the bulk properties of soft materials at the local scale. We apply it to a solution of entangled, filamentous actin, a particularly difficult material to characterize with conventional techniques. Beyond a description of measurements and apparatus, we also discuss, from a theoretical point of view, the interpretation and fundamental limitations of this and other microrheological techniques. In the second part, we describe the condensation dynamics of a single, semiflexible filament, induced by changing solvent conditions. A biologically important example of this phenomenon is the condensation of DNA into toroidal structures, which occurs, for instance, in viral capsids. Our observations of a molecular simulation motivate an unexpected pathway of collapse via a series of metastable intermediates we call ``racquet'' states. The analysis of the conformational energies of these structures in the

  17. [Poly(3-hydroxybutyrate) and biopolymer systems on the basis of this polyester].

    Science.gov (United States)

    Bonartsev, A P; Bonartseva, G A; Shaĭtan, K V; Kirpichnikov, M P

    2011-01-01

    Biodegradable biopolymers attract much attention in biology and medicine due to its wide application. The present review is designed to be a comprehensive source for research of biodegradable and biocompatible bacterial polymer, poly(3-hydroxybutyrate). This paper focuses on basic properties of biopolymer: biodegradability and biocompatibility, as well as on biopolymer systems: various materials, devices and compositions on the basis of biopolymer. Application of biopolymer systems based on poly(3-hydroxybutyrate) in medicine as surgical implants, in bioengineering as scaffold for cell cultures, and in pharmacy as drug dosage forms and drug systems is observed in the present review.

  18. Generalized Wideband Cyclic MUSIC

    Directory of Open Access Journals (Sweden)

    Zhang-Meng Liu

    2009-01-01

    Full Text Available The method of Spectral Correlation-Signal Subspace Fitting (SC-SSF fails to separate wideband cyclostationary signals with coherent second-order cyclic statistics (SOCS. Averaged Cyclic MUSIC (ACM method made up for the drawback to some degree via temporally averaging the cyclic cross-correlation of the array output. This paper interprets ACM from another perspective and proposes a new DOA estimation method by generalizing ACM for wideband cyclostationary signals. The proposed method successfully makes up for the aforementioned drawback of SC-SSF and obtains a more satisfying performance than ACM. It is also demonstrated that ACM is a simplified form of the proposed method when only a single spectral frequency is exploited, and the integration of the frequencies within the signal bandwidth helps the new method to outperform ACM.

  19. The cyclic reduction algorithm

    Science.gov (United States)

    Bini, Dario; Meini, Beatrice

    2009-05-01

    Cyclic reduction is an algorithm invented by G.H. Golub and R. W. Hockney in the mid 1960s for solving linear systems related to the finite differences discretization of the Poisson equation over a rectangle. Among the algorithms of Gene Golub, it is one of the most versatile and powerful ever created. Recently, it has been applied to solve different problems from different applicative areas. In this paper we survey the main features of cyclic reduction, relate it to properties of analytic functions, recall its extension to solving more general finite and infinite linear systems, and different kinds of nonlinear matrix equations, including algebraic Riccati equations, with applications to Markov chains, queueing models and transport theory. Some new results concerning the convergence properties of cyclic reduction and its applicability are proved under very weak assumptions. New formulae for overcoming breakdown are provided.

  20. Thermal Degradation and Damping Characteristic of UV Irradiated Biopolymer

    Directory of Open Access Journals (Sweden)

    Anika Zafiah M. Rus

    2015-01-01

    Full Text Available Biopolymer made from renewable material is one of the most important groups of polymer because of its versatility in application. In this study, biopolymers based on waste vegetable oil were synthesized and cross-link with commercial polymethane polyphenyl isocyanate (known as BF. The BF was compressed by using hot compression moulding technique at 90°C based on the evaporation of volatile matter, known as compress biopolymer (CB. Treatment with titanium dioxide (TiO2 was found to affect the physical property of compressed biopolymer composite (CBC. The characterization of thermal degradation, activation energy, morphology structure, density, vibration, and damping of CB were determined after UV irradiation exposure. This is to evaluate the photo- and thermal stability of the treated CB or CBC. The vibration and damping characteristic of CBC samples is significantly increased with the increasing of UV irradiation time, lowest thickness, and percentages of TiO2 loading at the frequency range of 15–25 Hz due to the potential of the sample to dissipate energy during the oscillation harmonic system. The damping property of CBC was improved markedly upon prolonged exposure to UV irradiation.

  1. Segregative phase separation in aqueous mixtures of polydisperse biopolymers

    NARCIS (Netherlands)

    Edelman, M.W.

    2003-01-01

    Keywords: biopolymer, gelatine, dextran, PEO, phase separation, polydispersity, molar mass distribution, SEC-MALLS, CSLM The temperature-composition phase diagram of aqueous solutions of gelatine and dextran, which show liquid/liquid phase segregation, were explored at temperatures above the gelatio

  2. Biopolymers produced from gelatin and other sustainable resources using polyphenols

    Science.gov (United States)

    Several researchers have recently demonstrated the feasibility of producing biopolymers from the reaction of polyphenolics with gelatin in combination with other proteins (e.g. whey) or with carbohydrates (e.g. chitosan and pectin). These combinations would take advantage of the unique properties o...

  3. Biopolymers in controlled release devices for agricultural applications.

    Science.gov (United States)

    The use of biopolymers such as starch for agricultural applications including controlled release devices is growing due the environmental benefits. Recently, concerns have grown about the worldwide spread of parasitic mites (Varroa destructor) that infect colonies of honey bees (Apis mellifera L.). ...

  4. Production of Degradable Biopolymer Composites by Particle-bonding

    Science.gov (United States)

    Conventionally, polymer composites had been manufactured by mixing the component materials in the extruder at high temperature. Agricultural biopolymers are usually mixtures of many types of compounds; when used as raw materials, however, high-temperature process causes unwanted consequences such a...

  5. USING BIOPOLYMERS TO REMOVE HEAVY METALS FROM SOIL AND WATER

    Science.gov (United States)

    Chemical remediation of soil may involve the use of harsh chemicals that generate waste streams, which may adversely affect the soil's integrity and ability to support vegetation. This article reviews the potential use of benign reagents, such as biopolymers, to extract heavy me...

  6. Physicochemical Characterization of Alginate Beads Containing Sugars and Biopolymers

    Directory of Open Access Journals (Sweden)

    Tatiana Aguirre Calvo

    2016-01-01

    Full Text Available Alginate hydrogels are suitable for the encapsulation of a great variety of biomolecules. Several alternatives to the conventional alginate formulation are being studied for a broad range of biotechnological applications; among them the addition of sugars and biopolymers arises as a good and economic strategy. Sugars (trehalose and β-cyclodextrin, a cationic biopolymer (chitosan, an anionic biopolymer (pectin, and neutral gums (Arabic, guar, espina corona, and vinal gums provided different characteristics to the beads. Here we discuss the influence of beads composition on several physicochemical properties, such as size and shape, analyzed through digital image analysis besides both water content and activity. The results showed that the addition of a second biopolymer, β-CD, or trehalose provoked more compact beads, but the fact that they were compact not necessarily implies a concomitant increase in their circularity. Espina corona beads showed the highest circularity value, being useful for applications which require a controlled and high circularity, assuring quality control. Beads with trehalose showed lower water content than the rest of the system, followed by those containing galactomannans (espina corona, vinal, and guar gums, revealing polymer structure effects. A complete characterization of the beads was performed by FT-IR, assigning the characteristics bands to each individual component.

  7. Associative Interactions in Crowded Solutions of Biopolymers Counteract Depletion Effects

    NARCIS (Netherlands)

    Groen, Joost; Foschepoth, David; te Brinke, Esra; Boersma, Arnold J; Imamura, Hiromi; Rivas, Germán; Heus, Hans A; Huck, Wilhelm T S

    2015-01-01

    The cytosol of Escherichia coli is an extremely crowded environment, containing high concentrations of biopolymers which occupy 20-30% of the available volume. Such conditions are expected to yield depletion forces, which strongly promote macromolecular complexation. However, crowded macromolecule s

  8. Corrosion Inhibition of High Speed Steel by Biopolymer HPMC Derivatives

    OpenAIRE

    Shih-Chen Shi; Chieh-Chang Su

    2016-01-01

    The corrosion inhibition characteristics of the derivatives of biopolymer hydroxypropyl methylcellulose (HPMC), hydroxypropyl methylcellulose phthalate (HPMCP), and hydroxypropyl methylcellulose acetate succinate (HPMCAS) film are investigated. Based on electrochemical impedance spectroscopic measurements and potentiodynamic polarization, the corrosion inhibition performance of high speed steel coated with HPMC derivatives is evaluated. The Nyquist plot and Tafel polarization demonstrate prom...

  9. Production of a Biopolymer at Reactor Scale: A Laboratory Experience

    Science.gov (United States)

    Genc, Rukan; Rodriguez-Couto, Susana

    2011-01-01

    Undergraduate students of biotechnology became familiar with several aspects of bioreactor operation via the production of xanthan gum, an industrially relevant biopolymer, by "Xanthomonas campestris" bacteria. The xanthan gum was extracted from the fermentation broth and the yield coefficient and productivity were calculated. (Contains 2 figures.)

  10. Effect of temperature on the AC impedance of protein and carbohydrate biopolymers

    Indian Academy of Sciences (India)

    S Muthulakshmi; S Iyyapushpam; D Pathinettam Padiyan

    2014-12-01

    The influence of temperature on the electrical behaviour of protein biopolymer papain and carbohydrate biopolymers like gum acacia, gum tragacanth and guar gum has been investigated using AC impedance technique. The observed semi-circles represent the material’s bulk electrical property that indicate the single relaxation process in the biopolymers. An increase in bulk electrical conductivity in the biopolymers with temperature is due to the hopping of charge carriers between the trapped sites. The depression parameter reveals the electrical equivalent circuit for the biopolymers. The AC electrical conductivity in the biopolymers follows the universal power law. From this, it is observed that the AC conductivity is frequency dependent and the biopolymer papain obeys large polaron tunnelling model, gum acacia and gum guar obey ion or electron tunnelling model, and gum tragacanth obeys the correlated barrier hopping model of conduction mechanisms.

  11. Cyclic Vomiting Syndrome

    Science.gov (United States)

    ... digestive diseases specialist (gastroenterologist). If you or your child is in the middle of a severe vomiting episode, the doctor may ... system disorders There's no cure for cyclic vomiting syndrome, so treatment ... may be prescribed: Anti-nausea drugs Sedatives Medications ...

  12. Cyclic Voltammetry Experiment.

    Science.gov (United States)

    Van Benschoten, James J.; And Others

    1983-01-01

    Describes a three-part experiment designed to introduce cyclic voltammetry to graduate/undergraduate students. Part 1 demonstrates formal reduction potential, redox electron transfer, diffusion coefficient, and electrochemical reversibility. Part 2 investigates electrochemical behavior of acetaminophen. Part 3 examines such experimental variables…

  13. On Expanded Cyclic Codes

    CERN Document Server

    Wu, Yingquan

    2008-01-01

    The paper has a threefold purpose. The first purpose is to present an explicit description of expanded cyclic codes defined in $\\GF(q^m)$. The proposed explicit construction of expanded generator matrix and expanded parity check matrix maintains the symbol-wise algebraic structure and thus keeps many important original characteristics. The second purpose of this paper is to identify a class of constant-weight cyclic codes. Specifically, we show that a well-known class of $q$-ary BCH codes excluding the all-zero codeword are constant-weight cyclic codes. Moreover, we show this class of codes achieve the Plotkin bound. The last purpose of the paper is to characterize expanded cyclic codes utilizing the proposed expanded generator matrix and parity check matrix. We analyze the properties of component codewords of a codeword and particularly establish the precise conditions under which a codeword can be represented by a subbasis. With the new insights, we present an improved lower bound on the minimum distance of...

  14. Cyclic Voltammetry Experiment.

    Science.gov (United States)

    Van Benschoten, James J.; And Others

    1983-01-01

    Describes a three-part experiment designed to introduce cyclic voltammetry to graduate/undergraduate students. Part 1 demonstrates formal reduction potential, redox electron transfer, diffusion coefficient, and electrochemical reversibility. Part 2 investigates electrochemical behavior of acetaminophen. Part 3 examines such experimental variables…

  15. Film forming microbial biopolymers for commercial applications--a review.

    Science.gov (United States)

    Vijayendra, S V N; Shamala, T R

    2014-12-01

    Microorganisms synthesize intracellular, structural and extracellular polymers also referred to as biopolymers for their function and survival. These biopolymers play specific roles as energy reserve materials, protective agents, aid in cell functioning, the establishment of symbiosis, osmotic adaptation and support the microbial genera to function, adapt, multiply and survive efficiently under changing environmental conditions. Viscosifying, gelling and film forming properties of these have been exploited for specific significant applications in food and allied industries. Intensive research activities and recent achievements in relevant and important research fields of global interest regarding film forming microbial biopolymers is the subject of this review. Microbial polymers such as pullulan, kefiran, bacterial cellulose (BC), gellan and levan are placed under the category of exopolysaccharides (EPS) and have several other functional properties including film formation, which can be used for various applications in food and allied industries. In addition to EPS, innumerable bacterial genera are found to synthesis carbon energy reserves in their cells known as polyhydroxyalkanoates (PHAs), microbial polyesters, which can be extruded into films with excellent moisture and oxygen barrier properties. Blow moldable biopolymers like PHA along with polylactic acid (PLA) synthesized chemically in vitro using lactic acid (LA), which is produced by LA bacteria through fermentation, are projected as biodegradable polymers of the future for packaging applications. Designing and creating of new property based on requirements through controlled synthesis can lead to improvement in properties of existing polysaccharides and create novel biopolymers of great commercial interest and value for wider applications. Incorporation of antimicrobials such as bacteriocins or silver and copper nanoparticles can enhance the functionality of polymer films especially in food packaging

  16. Cyclic Voltammograms from First Principles

    DEFF Research Database (Denmark)

    Karlberg, Gustav; Jaramillo, Thomas; Skulason, Egill

    2007-01-01

    Cyclic voltammetry is a fundamental experimental tool for characterizing electrochemical surfaces. Whereas cyclic voltammetry is widely used within the field of electrochemistry, a way to quantitatively and directly relate the cyclic voltammogram to ab initio calculations has been lacking, even f...

  17. Dynamics of cyclic machines

    CERN Document Server

    Vulfson, Iosif

    2015-01-01

    This book focuses on modern methods of oscillation analysis in machines, including cyclic action mechanisms (linkages, cams, steppers, etc.). It presents schematization techniques and mathematical descriptions of oscillating systems, taking into account the variability of the parameters and nonlinearities, engineering evaluations of dynamic errors, and oscillation suppression methods. The majority of the book is devoted to the development of new methods of dynamic analysis and synthesis for cyclic machines that form regular oscillatory systems with multiple duplicate modules.  There are also sections examining aspects of general engineering interest (nonlinear dissipative forces, systems with non-stationary constraints, impacts and pseudo-impacts in clearances, etc.)  The examples in the book are based on the widely used results of theoretical and experimental studies as well as engineering calculations carried out in relation to machines used in the textile, light, polygraphic and other industries. Particu...

  18. The Cyclic Model Simplified

    CERN Document Server

    Steinhardt, P J; Steinhardt, Paul J.; Turok, Neil

    2004-01-01

    The Cyclic Model attempts to resolve the homogeneity, isotropy, and flatness problems and generate a nearly scale-invariant spectrum of fluctuations during a period of slow contraction that precedes a bounce to an expanding phase. Here we describe at a conceptual level the recent developments that have greatly simplified our understanding of the contraction phase and the Cyclic Model overall. The answers to many past questions and criticisms are now understood. In particular, we show that the contraction phase has equation of state w>1 and that contraction with w>1 has a surprisingly similar properties to inflation with w < -1/3. At one stroke, this shows how the model is different from inflation and why it may work just as well as inflation in resolving cosmological problems.

  19. Soil Improvement Using MICP and Biopolymers: A Review

    Science.gov (United States)

    Sohail Ashraf, Muhammad; Baharom Azahar, Syed; Zulaikha Yusof, Nur

    2017-08-01

    Ground improvement techniques provide strong natural platforms for construction activities and save the need for designing more resistant structures which would have been necessary on weak ground. This paper discusses the biogeotechnical techniques for improving the resistance of unsaturated sand dunes against surficial erosion by natural processes of wave actions and storm surges. Mechanism of microbially induced calcite precipitation (MICP) and its optimization by utilizing sea water and minimal urea usage is discussed. Common factors affecting the MICP process are briefly discussed. Biomineralization using biopolymers is also described along with the soil strengthening mechanisms. Geotechnical applications of some commonly available biopolymers are described briefly. Advantages and limitations in both these mineralization methods are analyzed and some research opportunities are pointed out for future research.

  20. Mucin biopolymers as broad-spectrum antiviral agents

    Science.gov (United States)

    Lieleg, Oliver; Lieleg, Corinna; Bloom, Jesse; Buck, Christopher B.; Ribbeck, Katharina

    2012-01-01

    Mucus is a porous biopolymer matrix that coats all wet epithelia in the human body and serves as the first line of defense against many pathogenic bacteria and viruses. However, under certain conditions viruses are able to penetrate this infection barrier, which compromises the protective function of native mucus. Here, we find that isolated porcine gastric mucin polymers, key structural components of native mucus, can protect an underlying cell layer from infection by small viruses such as human papillomavirus (HPV), Merkel cell polyomavirus (MCV), or a strain of influenza A virus. Single particle analysis of virus mobility inside the mucin barrier reveals that this shielding effect is in part based on a retardation of virus diffusion inside the biopolymer matrix. Our findings suggest that purified mucins may be used as a broad-range antiviral supplement to personal hygiene products, baby formula or lubricants to support our immune system. PMID:22475261

  1. Field experience with floodwater diversion by complexed biopolymers

    Energy Technology Data Exchange (ETDEWEB)

    Abdo, M.K.; Chung, M.S.; Klaric, T.M.; Phelps, C.H.

    1984-04-01

    Due to preferential flow of the injected water through the most permeable zones, waterflooding of stratified reservoirs is generally inefficient. A process for improving the performance of waterfloods in such reservoirs has been developed; it is based on complexing biopolymers with multivalent cations to form gels for selective blocking of water-thief zones, thereby diverting the trailing floodwater to previously under-invaded reservoir regions to recover by-passed oil. This polymeric modification of stratification and of water injection profile leads to increased volumetric sweep of the reservoir by the floodwater and, in turn, to improved oil production. This paper summarizes Mobil's experience in its first seven field projects in Oklahoma using this process. A total of two hundred and five injection wells were treated with complexed biopolymers, resulting in substantial alteration of water flow patterns and in significant incremental oil recovery.

  2. Corrosion Inhibition of High Speed Steel by Biopolymer HPMC Derivatives

    Directory of Open Access Journals (Sweden)

    Shih-Chen Shi

    2016-07-01

    Full Text Available The corrosion inhibition characteristics of the derivatives of biopolymer hydroxypropyl methylcellulose (HPMC, hydroxypropyl methylcellulose phthalate (HPMCP, and hydroxypropyl methylcellulose acetate succinate (HPMCAS film are investigated. Based on electrochemical impedance spectroscopic measurements and potentiodynamic polarization, the corrosion inhibition performance of high speed steel coated with HPMC derivatives is evaluated. The Nyquist plot and Tafel polarization demonstrate promising anti-corrosion performance of HPMC and HPMCP. With increasing film thickness, both materials reveal improvement in corrosion inhibition. Moreover, because of a hydrophobic surface and lower moisture content, HPMCP shows better anti-corrosion performance than HPMCAS. The study is of certain importance for designing green corrosion inhibitors of high speed steel surfaces by the use of biopolymer derivatives.

  3. Biopolymer chitin: extraction and characterization; Biopolimero quitina: extracao e caracterizacao

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    The biopolymers are materials made from renewable sources such as soybean, corn, cane sugar, cellulose and chitin. Chitin is the most abundant biopolymer found in nature, after cellulose. The chemical structure of chitin is distinguished by the hydroxyl group, of structure from cellulose, located at position C-2, which in the chitin is replaced by acetamine group. The objective of this study was to develop the chitin from exoskeletons of Litopenaeus vannamei shrimp, which are discarded as waste, causing pollutions, environmental problems and thus obtain better utilization of these raw materials. It also, show the extraction process and deacetylation of chitosan. The extraction of chitin followed steps of demineralization, desproteinization and deodorization. Chitin and chitosan were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and the thermals properties were analyzed by thermogravimetry (TG/DTG). (author)

  4. Mobility Enhancement of Red Blood Cells with Biopolymers

    Science.gov (United States)

    Tahara, Daiki; Oikawa, Noriko; Kurita, Rei

    2016-03-01

    Adhesion of red blood cells (RBC) to substrates are one of crucial problems for a blood clot. Here we investigate the mobility of RBC between two glass substrates in saline with polymer systems. We find that RBCs are adhered to the glass substrate with PEG, however the mobility steeply increases with fibrinogen and dextran, which are biopolymers. We also find that the mobility affects an aggregation dynamics of RBCs, which is related with diseases such as influenza, blood clot and so on. The Brownian motion helps to increase probability of contact with each other and to find a more stable condition of the aggregation. Thus the biopolymers play important roles not only for preventing the adhesion but also for the aggregation.

  5. Production of biopolymers by Pseudomonas aeruginosa isolated from marine source

    Directory of Open Access Journals (Sweden)

    Nazia Jamil

    2008-06-01

    Full Text Available Two bacterial strains, Pseudomonas aeruginosa CMG607w and CMG1421 produce commercially important biopolymers. CMG607w isolated from the sediments of Lyari outfall to Arabian Sea synthesize the mcl-polyhydroxyalkanoates from various carbon sources. The production of PHAs was directly proportional to the incubation periods. Other strain CMG1421, a dry soil isolate, produced high viscous water absorbing extracellular acidic polysaccharide when it was grown aerobically in the minimal medium containing glucose or fructose or sucrose as sole source of carbon. The biopolymer had the ability to absorb water 400 times more than its dry weight. This property was superior to that of currently used non-degradable synthetic water absorbents. It acted as salt filter and had rheological and stabilizing activity as well.

  6. Diagnosis of Cyclic Vomiting

    Directory of Open Access Journals (Sweden)

    J Gordon Millichap

    2002-12-01

    Full Text Available In a study at Children’s Hospital, Ann Arbor, MI, and Children’s Memorial Hospital, Chicago, designed primarily to compare cost-effectiveness of three methods of management of cyclic vomiting cases, one group of patients received an extensive diagnostic evaluation, a second was treated with empiric antimigraine drugs for 2 months, and a third an upper GI series with small-bowel follow-through (UGI-SBFT plus empiric therapy.

  7. Geometry of Cyclic Pursuit

    Science.gov (United States)

    2009-12-18

    analysis of the equilibria based on linearization of the shape dynamics. In [10], the authors extend their analysis to incorporate feedback control...differentiable curves in R2, deriving our dynamics from the natural Frenet frame equations (see, e.g., [5] for details). (A three- dimensional analysis of...cyclic pursuit formulated in terms of the natural Frenet frame equations is a topic of ongoing work.) As is depicted in figure 1, we let ri denote the

  8. Interaction between polymer constituents and the structure of biopolymers

    Science.gov (United States)

    Rein, R.

    1974-01-01

    The paper reviews the current status of methods for calculating intermolecular interactions between biopolymer units. The nature of forces contributing to the various domains of intermolecular separations is investigated, and various approximations applicable in the respective regions are examined. The predictive value of current theory is tested by establishing a connection with macroscopic properties and comparing the theoretical predicted values with those derived from experimental data. This has led to the introduction of a statistical model describing DNA.

  9. Application of Raman spectroscopy method for analysis of biopolymer materials

    Science.gov (United States)

    Timchenko, Elena V.; Timchenko, Pavel E.; Volchkov, S. E.; Mahortova, Alexsandra O.; Asadova, Anna A.; Kornilin, Dmitriy V.

    2016-10-01

    This work presents the results of spectral analysis of biopolymer materials that are implemented in medical sphere. Polymer samples containing polycaprolactone and iron oxides of different valence were used in the studies. Raman spectroscopy method was used as a main control method. Relative content of iron and polycaprolactone in studied materials was assessed using ratio of RS intensities values at 604 cm-1 and 1726 cm-1 wavenumbers to intensity value of 1440 cm-1 line.

  10. PROPERTIES OF PREPARATIONS FUNCTIONAL BIOPOLYMERS OF A FISH ORIGIN

    Directory of Open Access Journals (Sweden)

    L. V. Antipova

    2014-01-01

    Full Text Available Development of theoretical and practical bases of technology of biocompatible materials of a domestic production on the basis of the natural polymeric systems allocated from raw materials of an animal, fish and a phytogenesis is actual in interests of development of science, health care, ecology. Now practically there are no domestic materials on the basis of products of modification of biopolymers for production of biocompatible materials with adjustable physical and chemical and biological properties. In this regard the special importance is gained by works on studying of functional properties of natural biopolymers, in particular collagen, elastin, hyaluronic acid. Interest of researchers to biopolymers of the proteinaceous nature is quite reasonable as they possess sufficient permeability, a big specific surface and sorption capacity, possibility of receiving convenient in technological forms, a low immunogenicity, possibility of regulation лизиса. Data on possible ways of use are presented in article secondary the collagenic wastes - skins of fishes of internal reservoirs of Russia. Innovative processing methods of processing of secondary raw materials with receiving functional biopolymers of a wide range of application are developed. With application of modern methods of researches their characteristics and property are defined. On a complex of organoleptic, physical and chemical indicators, indexes of biological activity the received preparations hyaluronic acid and collagen can find broad application in medicine, cosmetology. The resource-saving technology of receiving tanning semi-finished products easily giving in to further processing for the purpose of receiving leather haberdashery and textile production is developed. Thus, scientific new approaches in processing of skins of pond fishes on the basis of their deep processing are proved.

  11. Quantum effective potential, electron transport and conformons in biopolymers

    Energy Technology Data Exchange (ETDEWEB)

    Dandoloff, Rossen [Laboratoire de Physique Theorique et Modelisation, Universite de Cergy-Pontoise, F-95302 Cergy-Pontoise (France); Balakrishnan, Radha [The Institute of Mathematical Sciences, Chennai 600113 (India)

    2005-07-08

    In the Kirchhoff model of a biopolymer, conformation dynamics can be described in terms of solitary waves, for certain special cross-section asymmetries. Applying this to the problem of electron transport, we show that the quantum effective potential arising due to the bends and twists of the polymer enables us to formalize and quantify the concept of a conformon that has been hypothesized in biology. Its connection to the soliton solution of the cubic nonlinear Schroedinger equation emerges in a natural fashion.

  12. Investigation of biopolymer networks by means of AFM

    Science.gov (United States)

    Keresztes, Z.; Rigó, T.; Telegdi, J.; Kálmán, E.

    Natural hydrogel alginate was investigated by means of atomic force microscopy (AFM) to gain microscale information on the morphological and rheological properties of the biopolymer network cross-linked by various cations. Local rheological properties of the gels measured by force spectroscopy gave correlation between increasing ion selectivity and increasing polymer elasticity. Adhesive forces acting between the surface of the gel and the probe, and also the intrinsic rheological properties of bulk polymers affect the microscopical image formation.

  13. Light-activated ionic gelation of common biopolymers.

    Science.gov (United States)

    Javvaji, Vishal; Baradwaj, Aditya G; Payne, Gregory F; Raghavan, Srinivasa R

    2011-10-18

    Biopolymers such as alginate and pectin are well known for their ability to undergo gelation upon addition of multivalent cations such as calcium (Ca(2+)). Here, we report a simple way to activate such ionic gelation by UV irradiation. Our approach involves combining an insoluble salt of the cation (e.g., calcium carbonate, CaCO(3)) with an aqueous solution of the polymer (e.g., alginate) along with a third component, a photoacid generator (PAG). Upon UV irradiation, the PAG dissociates to release H(+) ions, which react with the CaCO(3) to generate free Ca(2+). In turn, the Ca(2+) ions cross-link the alginate chains into a physical network, thereby resulting in a hydrogel. Dynamic rheological experiments confirm the elastic character of the alginate gel, and the gel modulus is shown to be tunable via the irradiation time as well as the PAG and alginate concentrations. The above approach is easily extended to other biopolymers such as pectin. Using this approach, a photoresponse can be imparted to conventional biopolymers without the need for any chemical modification of the molecules. Photoresponsive alginate gels may be useful in creating biomaterials or tissue mimics. As a step toward potential applications, we demonstrate the ability to photopattern a thin film of alginate gel onto a glass substrate under mild conditions.

  14. Biodegradation study of some food packaging biopolymers based on PVA

    Directory of Open Access Journals (Sweden)

    Elena Elisabeta Tanase

    2016-03-01

    Full Text Available Abstract Polymers are a common choice as protective materials since they combine flexibility, variable sizes and shapes, relatively light weight, stability, resistance to breaking, barrier properties and perceived high-quality image with cost-effectiveness. Currently, mainly non-biodegradable petroleum-based synthetic polymers are used as packaging materials for foods, because of their availability, low cost and functionality. However, biopolymers can be made from renewable resources without the environmental issues of petroleum-based polymers and with the additional advantage of being available from renewable sources or as by-products or waste-products from the food and agriculture industries. The aim of this study was to test some food packaging biopolymers based on PVA. In this respect, some biopolymers for food packaging applications were subjected to biodegradation tests by covering the tested samples with soil. The samples were incubated in known temperature and humidity conditions. The experiment lasted 45 days, after that the samples were washed, weighed and the biodegradation degree was calculated. The obtained results shows that PVA is a promising material for food packaging usage, as it is made from renewable resources and it is environmentally friendly.

  15. Characterization of functional biopolymers under various external stimuli

    Energy Technology Data Exchange (ETDEWEB)

    Maleki, Atoosa

    2008-07-01

    Polymers are large molecules composed of repeating structural units connected by covalent chemical bonds. Biopolymers are a class of polymers produced by living organisms, which exhibit both biocompatible and biodegradable properties. The behavior of a biopolymer in solution is strongly dependent on the chemical and physical structure of the polymer chain, as well as external environmental conditions. To improve biopolymers in the direction of higher performance and better functionality, understanding of their physicochemical behavior and their response to external stimuli are of great importance. Rheology, rheo-small angle light scattering, dynamic light scattering, small angle neutron scattering, and asymmetric flow field-flow fractionation were utilized in this thesis to investigate the properties of hydroxyethyl cellulose and its hydrophobically modified analogue, as well as dextran, hyaluronan, and mucin under different conditions such as temperature, solvent, mechanical stress and strain, and radiation. Different novel hydrogels were prepared by using various chemical cross-linking agents. Specific features of these macromolecules provide them to be used as 'functional' materials, e.g., sensors, actuators, personal care products, enhanced oil recovery, and controlled drug delivery systems (author)

  16. A Novel Approach for Entrapment of Biopolymers in Silica Matrix by Sol-gel Technique

    Institute of Scientific and Technical Information of China (English)

    Yu.Shchipunov

    2007-01-01

    1 Results The entrapment of biopolymers into silica by the sol-gel technique meets with incompatibility of inorganic and bioorganic components. The aim was to develop a compatible procedure biomimicking the biomineralization processes in the living nature. A suggested solution in Ref.[1-2] for the biopolymer entrapment into silica matrix is based on a novel silica precursor. The developed approach is distinguished from the common technique for fabrication of hybrid biopolymer-silica nanocomposite materi...

  17. Surface modification of neural prosthetic devices by conducting polymers and biopolymers

    Science.gov (United States)

    Cui, Xinyan

    Micromachined neural prosthetic devices facilitate the functional stimulation of and recording from the peripheral and central nervous systems. The microelectrode sites on the neural probes are the actual interface to communicate with neurons. The surfaces of the devices should provide intimate interfacial contact between electrodes and neurons, facilitate the charge transport from ionically conductive tissue to electronically conductive electrode and induce selected neurons or neuron processes to attach onto the microelectrode. Traditional metal electrode materials do not fulfill these functions. Biocompatible conducting polymers were therefore used to modify the surface of the microelectrodes. An electrochemical polymerization approach was developed to directly deposit conductive polymers, such as polypyrrole and poly (3,4-ethylenedioxythiophene) (PEDOT), together with biopolymers, such as protein polymers and bioactive peptides, onto the microelectrode sites. It was found that the deposition of conducting polymer significantly lowered the electrode impedance which is beneficial to neural signal transport. The electronic properties of the conductive polymers were found to be influenced by the film morphology, which could be tailored by controlling the polymerization conditions. The incorporation of biopolymers was confirmed by microfocused Fourier-Transformed infrared (FTIR) spectroscopy. Rat glia and human neuroblastoma cells were shown to preferentially attach and grow on the coated electrode site area of the neural probes. The chemical stability of conducting polymer/biomolecule coatings was studied using FTIR, impedance spectroscopy and cyclic voltammetry. The biomolecules were stable in the film after seven weeks of soaking in deionized water, while polypyrrole underwent some subtle changes in chemical structure. PEDOT was proven to be a more stable material under potential cycling and provided even lower impedance. The adhesion between the coating and

  18. Introduction of soft X-ray spectromicroscopy as an advanced technique for plant biopolymers research.

    Directory of Open Access Journals (Sweden)

    Chithra Karunakaran

    Full Text Available Soft X-ray absorption spectroscopy coupled with nano-scale microscopy has been widely used in material science, environmental science, and physical sciences. In this work, the advantages of soft X-ray absorption spectromicroscopy for plant biopolymer research were demonstrated by determining the chemical sensitivity of the technique to identify common plant biopolymers and to map the distributions of biopolymers in plant samples. The chemical sensitivity of soft X-ray spectroscopy to study biopolymers was determined by recording the spectra of common plant biopolymers using soft X-ray and Fourier Transform mid Infrared (FT-IR spectroscopy techniques. The soft X-ray spectra of lignin, cellulose, and polygalacturonic acid have distinct spectral features. However, there were no distinct differences between cellulose and hemicellulose spectra. Mid infrared spectra of all biopolymers were unique and there were differences between the spectra of water soluble and insoluble xylans. The advantage of nano-scale spatial resolution exploited using soft X-ray spectromicroscopy for plant biopolymer research was demonstrated by mapping plant cell wall biopolymers in a lentil stem section and compared with the FT-IR spectromicroscopy data from the same sample. The soft X-ray spectromicroscopy enables mapping of biopolymers at the sub-cellular (~30 nm resolution whereas, the limited spatial resolution in the micron scale range in the FT-IR spectromicroscopy made it difficult to identify the localized distribution of biopolymers. The advantages and limitations of soft X-ray and FT-IR spectromicroscopy techniques for biopolymer research are also discussed.

  19. Introduction of soft X-ray spectromicroscopy as an advanced technique for plant biopolymers research.

    Science.gov (United States)

    Karunakaran, Chithra; Christensen, Colleen R; Gaillard, Cedric; Lahlali, Rachid; Blair, Lisa M; Perumal, Vijayan; Miller, Shea S; Hitchcock, Adam P

    2015-01-01

    Soft X-ray absorption spectroscopy coupled with nano-scale microscopy has been widely used in material science, environmental science, and physical sciences. In this work, the advantages of soft X-ray absorption spectromicroscopy for plant biopolymer research were demonstrated by determining the chemical sensitivity of the technique to identify common plant biopolymers and to map the distributions of biopolymers in plant samples. The chemical sensitivity of soft X-ray spectroscopy to study biopolymers was determined by recording the spectra of common plant biopolymers using soft X-ray and Fourier Transform mid Infrared (FT-IR) spectroscopy techniques. The soft X-ray spectra of lignin, cellulose, and polygalacturonic acid have distinct spectral features. However, there were no distinct differences between cellulose and hemicellulose spectra. Mid infrared spectra of all biopolymers were unique and there were differences between the spectra of water soluble and insoluble xylans. The advantage of nano-scale spatial resolution exploited using soft X-ray spectromicroscopy for plant biopolymer research was demonstrated by mapping plant cell wall biopolymers in a lentil stem section and compared with the FT-IR spectromicroscopy data from the same sample. The soft X-ray spectromicroscopy enables mapping of biopolymers at the sub-cellular (~30 nm) resolution whereas, the limited spatial resolution in the micron scale range in the FT-IR spectromicroscopy made it difficult to identify the localized distribution of biopolymers. The advantages and limitations of soft X-ray and FT-IR spectromicroscopy techniques for biopolymer research are also discussed.

  20. Introduction of Soft X-Ray Spectromicroscopy as an Advanced Technique for Plant Biopolymers Research

    Science.gov (United States)

    Karunakaran, Chithra; Christensen, Colleen R.; Gaillard, Cedric; Lahlali, Rachid; Blair, Lisa M.; Perumal, Vijayan; Miller, Shea S.; Hitchcock, Adam P.

    2015-01-01

    Soft X-ray absorption spectroscopy coupled with nano-scale microscopy has been widely used in material science, environmental science, and physical sciences. In this work, the advantages of soft X-ray absorption spectromicroscopy for plant biopolymer research were demonstrated by determining the chemical sensitivity of the technique to identify common plant biopolymers and to map the distributions of biopolymers in plant samples. The chemical sensitivity of soft X-ray spectroscopy to study biopolymers was determined by recording the spectra of common plant biopolymers using soft X-ray and Fourier Transform mid Infrared (FT-IR) spectroscopy techniques. The soft X-ray spectra of lignin, cellulose, and polygalacturonic acid have distinct spectral features. However, there were no distinct differences between cellulose and hemicellulose spectra. Mid infrared spectra of all biopolymers were unique and there were differences between the spectra of water soluble and insoluble xylans. The advantage of nano-scale spatial resolution exploited using soft X-ray spectromicroscopy for plant biopolymer research was demonstrated by mapping plant cell wall biopolymers in a lentil stem section and compared with the FT-IR spectromicroscopy data from the same sample. The soft X-ray spectromicroscopy enables mapping of biopolymers at the sub-cellular (~30 nm) resolution whereas, the limited spatial resolution in the micron scale range in the FT-IR spectromicroscopy made it difficult to identify the localized distribution of biopolymers. The advantages and limitations of soft X-ray and FT-IR spectromicroscopy techniques for biopolymer research are also discussed. PMID:25811457

  1. Ekpyrotic and Cyclic Cosmology

    CERN Document Server

    Lehners, Jean-Luc

    2008-01-01

    Ekpyrotic and cyclic cosmologies provide theories of the very early and of the very late universe. In these models, the big bang is described as a collision of branes - and thus the big bang is not the beginning of time. Before the big bang, there is an ekpyrotic phase with equation of state w=P/rho >> 1 (where P is the average pressure and rho the average energy density) during which the universe slowly contracts. This phase resolves the standard cosmological puzzles and generates a nearly scale-invariant spectrum of cosmological perturbations containing a significant non-gaussian component. At the same time it produces small-amplitude gravitational waves with a blue spectrum. The dark energy dominating the present-day cosmological evolution is reinterpreted as a small attractive force between our brane and a parallel one. This force eventually induces a new ekpyrotic phase and a new brane collision, leading to the idea of a cyclic universe. This review discusses the detailed properties of these models, thei...

  2. Ekpyrotic and cyclic cosmology

    Energy Technology Data Exchange (ETDEWEB)

    Lehners, Jean-Luc [Princeton Center for Theoretical Science, Jadwin Hall, Princeton University, Princeton NJ 08544 (United States)], E-mail: jlehners@princeton.edu

    2008-09-15

    Ekpyrotic and cyclic cosmologies provide theories of the very early and of the very late universe. In these models, the big bang is described as a collision of branes - and thus the big bang is not the beginning of time. Before the big bang, there is an ekpyrotic phase with equation of state w=P/({rho}) >>1 (where P is the average pressure and {rho} the average energy density) during which the universe slowly contracts. This phase resolves the standard cosmological puzzles and generates a nearly scale-invariant spectrum of cosmological perturbations containing a significant non-Gaussian component. At the same time it produces small-amplitude gravitational waves with a blue spectrum. The dark energy dominating the present-day cosmological evolution is reinterpreted as a small attractive force between our brane and a parallel one. This force eventually induces a new ekpyrotic phase and a new brane collision, leading to the idea of a cyclic universe. This review discusses the detailed properties of these models, their embedding in M-theory and their viability, with an emphasis on open issues and observational signatures.

  3. [Asthma and cyclic neutropenia].

    Science.gov (United States)

    Salazar Cabrera, A N; Berrón Pérez, R; Ortega Martell, J A; Onuma Takane, E

    1996-01-01

    We report a male with history of recurrent infections (recurrent oral aphtous disease [ROAD], middle ear infections and pharyngo amigdalitis) every 3 weeks since he was 7 months old. At the age of 3 years cyclic neutropenia was diagnosed with cyclic fall in the total neutrophil count in blood smear every 21 days and prophylactic antimicrobial therapy was indicated. Episodic events every 3 weeks of acute asthma and allergic rhinitis were detected at the age of 6 years old and specific immunotherapy to Bermuda grass was given during 3 years with markedly improvement in his allergic condition but not in the ROAD. He came back until the age of 16 with episodic acute asthma and ROAD. The total neutrophil count failed to 0 every 21 days and surprisingly the total eosinophil count increased up to 2,000 at the same time, with elevation of serum IgE (412 Ul/mL). Specific immunotherapy to D.pt. and Aller.a. and therapy with timomodulin was indicated. After 3 months we observed clinical improvement in the asthmatic condition and the ROAD disappeared, but the total neutrophil count did not improve. We present this case as a rare association between 2 diseases with probably no etiological relationship but may be physiopatological that could help to understand more the pathogenesis of asthma.

  4. Fragmentations of protonated cyclic-glycylglycine and cyclic-alanylalanine

    NARCIS (Netherlands)

    Shek, P. Y. I.; Lau, J. K. C.; Zhao, J. F.; Grzetic, J.; Verkerk, U. H.; Oomens, J.; Hopkinson, A. C.; Siu, K. W. M.

    2012-01-01

    Collision-induced dissociation has been used to study the fragmentations of two protonated diketopiperazines, protonated cyclic-glycylglycine and cyclic-alanylalanine. Protonated cyclo-AA lost CO and (CO + NH3) at low collision energies, channels attributed to dissociation of the O-protonated

  5. The wear of two orthopaedic biopolymers against each other.

    Science.gov (United States)

    Joyce, T J

    2005-01-01

    The potential for all-polymer prostheses has not been widely investigated. It might be expected that the wear of such biomaterial combinations would be excessive, but an in vivo study of all polymer knee prostheses reported that there were no failures due to wear, even after ten years of clinical use. This design of knee prosthesis used polyacetal and ultra high molecular weight polyethylene (UHMWPE) as the biopolymers. Similarly, an earlier in vitro study of polyacetal and UHMWPE hip prostheses indicated lower wear than for a cobalt chrome and UHMWPE combination. Therefore this study set out to test the poly-acetal and UHMWPE combination in a wear screening rig which had previously been validated against clinical data for artificial hip joints. Two different motion conditions were applied to the test samples and each biopolymer was tested as both pin and plate. Interestingly it was found that, whatever the contribution from pin or plate, the total mean wear factors were 1.5 10 -6 mm 3/Nm under reciprocation-only, and 4.1 10 -6 mm 3 /Nm under multi-directional motion. These wear factors were greater than those found when a conventional metal-on-UHMWPE couple was tested under the same loading, motion and lu-bricant conditions. A comparison was also undertaken with the wear of other orthopaedic biopolymer combinations, namely cross-linked polyethylene (XLPE) against itself, and UHMWPE against itself. The XLPE pairing showed somewhat lower wear than the polyacetal and UHMWPE couple, while the UHMWPE pairing showed the highest wear of all, approximately an or-der of magnitude greater than the polyacetal and UHMWPE combination.

  6. Influence of Temperature on Mechanical Properties of Jute/Biopolymer Composites

    DEFF Research Database (Denmark)

    Løvdal, Alexandra Liv Vest; Laursen, Louise Løcke; Løgstrup Andersen, Tom

    2013-01-01

    Biopolymers and natural fibers are receiving wide attention for the potential to have good performance composites with low environmental impact. A current limitation of most biopolymers is however their change in mechanical properties at elevated temperatures. This study investigates the mechanic...... and composites. © 2012 Wiley Periodicals, Inc....

  7. Patterning surface by site selective capture of biopolymer hydrogel beads.

    Science.gov (United States)

    Guyomard-Lack, Aurélie; Moreau, Céline; Delorme, Nicolas; Marquis, Mélanie; Fang, Aiping; Bardeau, Jean-François; Cathala, Bernard

    2012-06-01

    This communication describes the fabrication of microstructured biopolymer surfaces by the site-selective capture of pectin hydrogel beads. A positively charged surface consisting of poly-L-lysine (PLL) was subjected to site-selective enzymatic degradation using patterned polydimethylsiloxane (PDMS) stamps covalently modified with trypsin, according to the recently described method. The patterned surface was used to capture ionically cross-linked pectin beads. The desired patterning of the hydrogel surfaces was generated by site-selective immobilization of these pectin beads. The ability of the hydrogels to be dried and swollen in water was assessed.

  8. Biophysical and biochemical characteristics of cutin, a plant barrier biopolymer.

    Science.gov (United States)

    Heredia, Antonio

    2003-03-17

    Cutin is a support biopolyester involved in waterproofing the leaves and fruits of higher plants, regulating the flow of nutrients among various plant cells and organs, and minimizing the deleterious impact of pathogens. Despite the complexity and intractable nature of this biopolymer, significant progress in chemical composition, molecular architecture and, more recently, biosynthesis have been made in the past 10 years. This review is focused in the description of these advances and their physiological impacts to improve our knowledge on plant cutin, an unusual topic in most plant physiology and biochemistry books and reviews.

  9. Quantized biopolymer translocation through nanopores: departure from simple scaling

    CERN Document Server

    Melchionna, Simone; Fyta, Maria; Kaxiras, Efthimios; Succi, Sauro

    2009-01-01

    We discuss multiscale simulations of long biopolymer translocation through wide nanopores that can accommodate multiple polymer strands. The simulations provide clear evidence of folding quantization, namely, the translocation proceeds through multi-folded configurations characterized by a well-defined integer number of folds. As a consequence, the translocation time acquires a dependence on the average folding number, which results in a deviation from the single-exponent power-law characterizing single-file translocation through narrow pores. The mechanism of folding quantization allows polymers above a threshold length (approximately $1,000$ persistence lengths for double-stranded DNA) to exhibit cooperative behavior and as a result to translocate noticeably faster.

  10. Peptide-based Biopolymers in Biomedicine and Biotechnology

    Science.gov (United States)

    Chow, Dominic; Nunalee, Michelle L.; Lim, Dong Woo; Simnick, Andrew J.; Chilkoti, Ashutosh

    2008-01-01

    Peptides are emerging as a new class of biomaterials due to their unique chemical, physical, and biological properties. The development of peptide-based biomaterials is driven by the convergence of protein engineering and macromolecular self-assembly. This review covers the basic principles, applications, and prospects of peptide-based biomaterials. We focus on both chemically synthesized and genetically encoded peptides, including poly-amino acids, elastin-like polypeptides, silk-like polymers and other biopolymers based on repetitive peptide motifs. Applications of these engineered biomolecules in protein purification, controlled drug delivery, tissue engineering, and biosurface engineering are discussed. PMID:19122836

  11. Chemical modeling of acid-base properties of soluble biopolymers derived from municipal waste treatment materials.

    Science.gov (United States)

    Tabasso, Silvia; Berto, Silvia; Rosato, Roberta; Marinos, Janeth Alicia Tafur; Ginepro, Marco; Zelano, Vincenzo; Daniele, Pier Giuseppe; Montoneri, Enzo

    2015-02-04

    This work reports a study of the proton-binding capacity of biopolymers obtained from different materials supplied by a municipal biowaste treatment plant located in Northern Italy. One material was the anaerobic fermentation digestate of the urban wastes organic humid fraction. The others were the compost of home and public gardening residues and the compost of the mix of the above residues, digestate and sewage sludge. These materials were hydrolyzed under alkaline conditions to yield the biopolymers by saponification. The biopolymers were characterized by 13C NMR spectroscopy, elemental analysis and potentiometric titration. The titration data were elaborated to attain chemical models for interpretation of the proton-binding capacity of the biopolymers obtaining the acidic sites concentrations and their protonation constants. The results obtained with the models and by NMR spectroscopy were elaborated together in order to better characterize the nature of the macromolecules. The chemical nature of the biopolymers was found dependent upon the nature of the sourcing materials.

  12. Simulating microbiologically influenced corrosion by depositing extracellular biopolymers on mild steel surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Roe, F.L.; Lewandowski, Z.; Funk, T. [Montana State Univ., Bozeman, MT (United States). Center for Biofilm Engineering

    1996-10-01

    Electrochemical properties of corroding mild steel (MS) surfaces were measured in real time using three closely spaced microelectrodes. Dissolved oxygen, pH, and ion currents were mapped simultaneously and noninvasively above a MS coupon partially coated with biopolymer gels. Calcium alginate (Ca-Alg [an extracellular biopolymer containing carboxylate functional groups]) and agarose (one without carboxylate functional groups) were tested. Corrosion occurred at approximately the same rate under the two biopolymer spots on the same coupon. Corrosion rates under these biopolymers were {approx} 4 mpy in a weak saline solution. Results suggested corrosion was not influenced by chemical properties of the biopolymer but possibly was controlled by oxygen reduction in noncoated regions of the coupon (i.e., a differential aeration cell).

  13. Microfluidic generation and selective degradation of biopolymer-based Janus microbeads.

    Science.gov (United States)

    Marquis, Mélanie; Renard, Denis; Cathala, Bernard

    2012-04-09

    We describe a microfluidic approach for generating Janus microbeads from biopolymer hydrogels. A flow-focusing device was used to emulsify the coflow of aqueous solutions of one or two different biopolymers in an organic phase to synthesize homo or hetero Janus microbeads. Biopolymer gelation was initiated, in the chip, by diffusion-controlled ionic cross-linking of the biopolymers. Pectin-pectin (homo Janus) and, for the first time, pectin-alginate (hetero Janus) microbeads were produced. The efficiency of separation of the two hemispheres, which reflected mixing and convection phenomena, was investigated by confocal scanning laser microscopy (CSLM) of previously labeled biopolymers. The interface of the hetero Janus structure was clearly defined, whereas that of the homo Janus microbeads was poorly defined. The Janus structure was confirmed by subjecting each microbead hemisphere to specific enzymatic degradation. These new and original microbeads from renewable resources will open up opportunities for studying relationships between combined enzymatic hydrolysis and active compound release.

  14. The arabidopsis cyclic nucleotide interactome

    KAUST Repository

    Donaldson, Lara

    2016-05-11

    Background Cyclic nucleotides have been shown to play important signaling roles in many physiological processes in plants including photosynthesis and defence. Despite this, little is known about cyclic nucleotide-dependent signaling mechanisms in plants since the downstream target proteins remain unknown. This is largely due to the fact that bioinformatics searches fail to identify plant homologs of protein kinases and phosphodiesterases that are the main targets of cyclic nucleotides in animals. Methods An affinity purification technique was used to identify cyclic nucleotide binding proteins in Arabidopsis thaliana. The identified proteins were subjected to a computational analysis that included a sequence, transcriptional co-expression and functional annotation analysis in order to assess their potential role in plant cyclic nucleotide signaling. Results A total of twelve cyclic nucleotide binding proteins were identified experimentally including key enzymes in the Calvin cycle and photorespiration pathway. Importantly, eight of the twelve proteins were shown to contain putative cyclic nucleotide binding domains. Moreover, the identified proteins are post-translationally modified by nitric oxide, transcriptionally co-expressed and annotated to function in hydrogen peroxide signaling and the defence response. The activity of one of these proteins, GLYGOLATE OXIDASE 1, a photorespiratory enzyme that produces hydrogen peroxide in response to Pseudomonas, was shown to be repressed by a combination of cGMP and nitric oxide treatment. Conclusions We propose that the identified proteins function together as points of cross-talk between cyclic nucleotide, nitric oxide and reactive oxygen species signaling during the defence response.

  15. Cyclic cohomology of Hopf algebras

    NARCIS (Netherlands)

    Crainic, M.

    2001-01-01

    We give a construction of ConnesMoscovicis cyclic cohomology for any Hopf algebra equipped with a character Furthermore we introduce a noncommutative Weil complex which connects the work of Gelfand and Smirnov with cyclic cohomology We show how the Weil complex arises naturally when looking at Hopf

  16. Nonlinear viscoelasticity and generalized failure criterion for biopolymer gels

    Science.gov (United States)

    Divoux, Thibaut; Keshavarz, Bavand; Manneville, Sébastien; McKinley, Gareth

    2016-11-01

    Biopolymer gels display a multiscale microstructure that is responsible for their solid-like properties. Upon external deformation, these soft viscoelastic solids exhibit a generic nonlinear mechanical response characterized by pronounced stress- or strain-stiffening prior to irreversible damage and failure, most often through macroscopic fractures. Here we show on a model acid-induced protein gel that the nonlinear viscoelastic properties of the gel can be described in terms of a 'damping function' which predicts the gel mechanical response quantitatively up to the onset of macroscopic failure. Using a nonlinear integral constitutive equation built upon the experimentally-measured damping function in conjunction with power-law linear viscoelastic response, we derive the form of the stress growth in the gel following the start up of steady shear. We also couple the shear stress response with Bailey's durability criteria for brittle solids in order to predict the critical values of the stress σc and strain γc for failure of the gel, and how they scale with the applied shear rate. This provides a generalized failure criterion for biopolymer gels in a range of different deformation histories. This work was funded by the MIT-France seed fund and by the CNRS PICS-USA scheme (#36939). BK acknowledges financial support from Axalta Coating Systems.

  17. Synthesis of 9-oxononanoic acid, a precursor for biopolymers.

    Science.gov (United States)

    Otte, Konrad B; Kirtz, Marko; Nestl, Bettina M; Hauer, Bernhard

    2013-11-01

    Polymers based on renewable resources have become increasingly important. The natural functionalization of fats and oils enables an easy access to interesting monomeric building blocks, which in turn transform the derivative biopolymers into high-performance materials. Unfortunately, interesting building blocks of medium-chain length are difficult to obtain by traditional chemical means. Herein, a biotechnological pathway is established that could provide an environmentally suitable and sustainable alternative. A multiple enzyme two-step one-pot process efficiently catalyzed by a coupled 9S-lipoxygenase (St-LOX1, Solanum tuberosum) and 9/13-hydroperoxide lyase (Cm-9/13HPL, Cucumis melo) cascade reaction is proposed as a potential route for the conversion of linoleic acid into 9-oxononanoic acid, which is a precursor for biopolymers. Lipoxygenase catalyzes the insertion of oxygen into linoleic acid through a radical mechanism to give 9S-hydroperoxy-octadecadienoic acid (9S-HPODE) as a cascade intermediate, which is subsequently cleaved by the action of Cm-9/13HPL. This one-pot process afforded a yield of 73 % combined with high selectivity. The best reaction performance was achieved when lipoxygenase and hydroperoxide lyase were applied in a successive rather than a simultaneous manner. Green leaf volatiles, which are desired flavor and fragrance products, are formed as by-products in this reaction cascade. Furthermore, we have investigated the enantioselectivity of 9/13-HPLs, which exhibited a strong preference for 9S-HPODE over 9R-HPODE.

  18. Associative Interactions in Crowded Solutions of Biopolymers Counteract Depletion Effects.

    Science.gov (United States)

    Groen, Joost; Foschepoth, David; te Brinke, Esra; Boersma, Arnold J; Imamura, Hiromi; Rivas, Germán; Heus, Hans A; Huck, Wilhelm T S

    2015-10-14

    The cytosol of Escherichia coli is an extremely crowded environment, containing high concentrations of biopolymers which occupy 20-30% of the available volume. Such conditions are expected to yield depletion forces, which strongly promote macromolecular complexation. However, crowded macromolecule solutions, like the cytosol, are very prone to nonspecific associative interactions that can potentially counteract depletion. It remains unclear how the cytosol balances these opposing interactions. We used a FRET-based probe to systematically study depletion in vitro in different crowded environments, including a cytosolic mimic, E. coli lysate. We also studied bundle formation of FtsZ protofilaments under identical crowded conditions as a probe for depletion interactions at much larger overlap volumes of the probe molecule. The FRET probe showed a more compact conformation in synthetic crowding agents, suggesting strong depletion interactions. However, depletion was completely negated in cell lysate and other protein crowding agents, where the FRET probe even occupied slightly more volume. In contrast, bundle formation of FtsZ protofilaments proceeded as readily in E. coli lysate and other protein solutions as in synthetic crowding agents. Our experimental results and model suggest that, in crowded biopolymer solutions, associative interactions counterbalance depletion forces for small macromolecules. Furthermore, the net effects of macromolecular crowding will be dependent on both the size of the macromolecule and its associative interactions with the crowded background.

  19. Assessment of respiration activity and ecotoxicity of composts containing biopolymers.

    Science.gov (United States)

    Kopeć, Michał; Gondek, Krzysztof; Baran, Agnieszka

    2013-03-01

    The research was conducted to determine if introducing biodegradable polymer materials to the composting process would affect selected biological properties of mature compost. Determination of biological properties of composts composed of testing their respiration activity and toxicity. Respiration activity was measured in material from the composting process by means of OxiTop Control measuring system. The ecotoxicity of composts was estimated by means of a set of biotests composed of three microbiotests using five test organisms. Introduction of polymer materials caused a decrease in respiration activity of mature compost. Similar dependencies as in the case of mass loss were registered. Compost to which a biodegradable polymer with the highest content of starch was added revealed the smallest difference in comparison with organic material composted without polymers. Lower content of starch in a polymer caused lower respiration activity of composts, whereas microorganism vaccine might have accelerated maturing of composts, thus contributing to the smallest respiration of compost. In composts containing biopolymers the following were observed: an increase in germination inhibition--2.5 times, roots growth inhibition--1.8 times, growth inhibition of Heterocypris incongruens--four times and luminescence inhibition of Vibrio fischeri--1.6 times in comparison with the control (compost K1). Composts containing biopolymers were classified as toxicity class III, whereas the compost without polymer addition as class II.

  20. DEVELOPMENT AND EVALUATION OF PIROXICAM LOADED BIOPOLYMER BASED TRANSDERMAL FILM

    Directory of Open Access Journals (Sweden)

    Kulkarni Parthasarathi Keshavarao

    2011-11-01

    Full Text Available The aim of the present study was to formulate biopolymer based transdermal film loaded with Piroxicam (PX. Transdermal films were prepared by using sodium locust bean gum (LBG and Sodium alginate (SA as biopolymers by varying the blend ratios by solution casting method. The drug loaded membranes were evaluated for thickness, tensile behaviours, content uniformity; transdermal permeation of PX through rat abdominal skin was determined by Franz diffusion cell. In vitro skin permeation profile of optimized formulation was compared with that of PX conventional gel. Carrageen induced rat paw edema model was used to investigate the in vivo performances. Menthol (3% and glycerin (3% are used as permeation enhancer and plasticizer, respectively. PX was found to be compatible and stable with the prepared formulation as confirmed by Fourier transform infrared spectroscopy (FTIR and Differential Scanning Calorimetric (DSC, studies. In-vitro release studies revels effectiveness after 24 h when compared with the conventional gel. The film does not show any signs of edema, erythema or ulceration. From the in-vitro skin permeation and anti inflammatory activity data it can be concluded that the developed optimized formulation (F3 has good potential to achieve the transdermal drug delivery of PX for effective therapy.

  1. Permeability Modification Using a Reactive Alkaline-Soluble Biopolymer

    Energy Technology Data Exchange (ETDEWEB)

    Sandra L. Fox; Xina Xie; Greg Bala

    2004-11-01

    Polymer injection has been used in reservoirs to alleviate contrasting permeability zones to enhance oil recovery (EOR). Polymer technology relies mainly on the use of polyacrylamides cross-linked by a hazardous metal or organic. Contemporary polymer plugging has investigated the stimulation of in-situ microorganisms to produce polymers (Jenneman et. al., 2000) and the use of biocatalysts to trigger gelling (Bailey et. al., 2000). The use of biological polymers are advantageous in that they can block high permeability areas, are environmentally friendly, and have potential to form reversible gels without the use of hazardous cross-linkers. Recent efforts have produced a reactive alkaline-soluble biopolymer from Agrobacterium species ATCC # 31749 that gels upon decreasing the pH of the polymeric solution. Microbial polymers are of interest due to their potential cost savings, compared to conventional use of synthetic chemical polymers. Numerous microorganisms are known to produce extracellular polysaccharides. One microbiological polymer of interest is curdlan, â - (1, 3) glucan, which has demonstrated gelling properties by a reduction in pH. The focus of this study was to determine the impact an alkaline-soluble biopolymer can have on sandstone permeability.

  2. Cyclic $n$-gonal Surfaces

    CERN Document Server

    Broughton, S Allen

    2010-01-01

    A cyclic $n$-gonal surface is a compact Riemann surface $X$ of genus $g\\geq 2$ admitting a cyclic group of conformal automorphisms $C$ of order $n$ such that the quotient space $X/C$ has genus 0. In this paper, we provide an overview of ongoing research into automorphism groups of cyclic $n$-gonal surfaces. Much of the paper is expository or will appear in forthcoming papers, so proofs are usually omitted. Numerous explicit examples are presented illustrating the computational methods currently being used to study these surfaces.

  3. Introduction of Microbial Biopolymers in Soil Treatment for Future Environmentally-Friendly and Sustainable Geotechnical Engineering

    Directory of Open Access Journals (Sweden)

    Ilhan Chang

    2016-03-01

    Full Text Available Soil treatment and improvement is commonly performed in the field of geotechnical engineering. Methods and materials to achieve this such as soil stabilization and mixing with cementitious binders have been utilized in engineered soil applications since the beginning of human civilization. Demand for environment-friendly and sustainable alternatives is currently rising. Since cement, the most commonly applied and effective soil treatment material, is responsible for heavy greenhouse gas emissions, alternatives such as geosynthetics, chemical polymers, geopolymers, microbial induction, and biopolymers are being actively studied. This study provides an overall review of the recent applications of biopolymers in geotechnical engineering. Biopolymers are microbially induced polymers that are high-tensile, innocuous, and eco-friendly. Soil–biopolymer interactions and related soil strengthening mechanisms are discussed in the context of recent experimental and microscopic studies. In addition, the economic feasibility of biopolymer implementation in the field is analyzed in comparison to ordinary cement, from environmental perspectives. Findings from this study demonstrate that biopolymers have strong potential to replace cement as a soil treatment material within the context of environment-friendly construction and development. Moreover, continuing research is suggested to ensure performance in terms of practical implementation, reliability, and durability of in situ biopolymer applications for geotechnical engineering purposes.

  4. Fabrication of Porous Materials from Natural/Synthetic Biopolymers and Their Composites

    Directory of Open Access Journals (Sweden)

    Udeni Gunathilake T.M. Sampath

    2016-12-01

    Full Text Available Biopolymers and their applications have been widely studied in recent years. Replacing the oil based polymer materials with biopolymers in a sustainable manner might give not only a competitive advantage but, in addition, they possess unique properties which cannot be emulated by conventional polymers. This review covers the fabrication of porous materials from natural biopolymers (cellulose, chitosan, collagen, synthetic biopolymers (poly(lactic acid, poly(lactic-co-glycolic acid and their composite materials. Properties of biopolymers strongly depend on the polymer structure and are of great importance when fabricating the polymer into intended applications. Biopolymers find a large spectrum of application in the medical field. Other fields such as packaging, technical, environmental, agricultural and food are also gaining importance. The introduction of porosity into a biomaterial broadens the scope of applications. There are many techniques used to fabricate porous polymers. Fabrication methods, including the basic and conventional techniques to the more recent ones, are reviewed. Advantages and limitations of each method are discussed in detail. Special emphasis is placed on the pore characteristics of biomaterials used for various applications. This review can aid in furthering our understanding of the fabrication methods and about controlling the porosity and microarchitecture of porous biopolymer materials.

  5. Fabrication of Porous Materials from Natural/Synthetic Biopolymers and Their Composites.

    Science.gov (United States)

    Sampath, Udeni Gunathilake T M; Ching, Yern Chee; Chuah, Cheng Hock; Sabariah, Johari J; Lin, Pai-Chen

    2016-12-07

    Biopolymers and their applications have been widely studied in recent years. Replacing the oil based polymer materials with biopolymers in a sustainable manner might give not only a competitive advantage but, in addition, they possess unique properties which cannot be emulated by conventional polymers. This review covers the fabrication of porous materials from natural biopolymers (cellulose, chitosan, collagen), synthetic biopolymers (poly(lactic acid), poly(lactic-co-glycolic acid)) and their composite materials. Properties of biopolymers strongly depend on the polymer structure and are of great importance when fabricating the polymer into intended applications. Biopolymers find a large spectrum of application in the medical field. Other fields such as packaging, technical, environmental, agricultural and food are also gaining importance. The introduction of porosity into a biomaterial broadens the scope of applications. There are many techniques used to fabricate porous polymers. Fabrication methods, including the basic and conventional techniques to the more recent ones, are reviewed. Advantages and limitations of each method are discussed in detail. Special emphasis is placed on the pore characteristics of biomaterials used for various applications. This review can aid in furthering our understanding of the fabrication methods and about controlling the porosity and microarchitecture of porous biopolymer materials.

  6. A differential vapor-pressure equipment for investigations of biopolymer interactions

    DEFF Research Database (Denmark)

    Andersen, Kim B; Koga, Y.; Westh, Peter

    2002-01-01

    , particularly a "gas-phase titration" routine for changing the cell composition, makes it effective for the investigations of several types of biopolymer interactions. These include isothermal studies of net affinities such as the adsorption of water to proteins or membranes, the preferential interaction...... of biopolymers with the components of a mixed solvent. the partitioning of solutes between a membrane and the aqueous bulk and the weak. specific binding of ligands to macromolecules. Furthermore, a temperature-scanning mode allows real-time elucidation of such interactions at thermally induced conformational...... changes in biopolymers. Selected examples of these applications are presented and discussed....

  7. Biomedical Biopolymers, their Origin and Evolution in Biomedical Sciences: A Systematic Review.

    Science.gov (United States)

    Yadav, Preeti; Yadav, Harsh; Shah, Veena Gowri; Shah, Gaurav; Dhaka, Gaurav

    2015-09-01

    Biopolymers provide a plethora of applications in the pharmaceutical and medical applications. A material that can be used for biomedical applications like wound healing, drug delivery and tissue engineering should possess certain properties like biocompatibility, biodegradation to non-toxic products, low antigenicity, high bio-activity, processability to complicated shapes with appropriate porosity, ability to support cell growth and proliferation and appropriate mechanical properties, as well as maintaining mechanical strength. This paper reviews biodegradable biopolymers focusing on their potential in biomedical applications. Biopolymers most commonly used and most abundantly available have been described with focus on the properties relevant to biomedical importance.

  8. Prognosis of Cyclic Vomiting Syndrome

    Directory of Open Access Journals (Sweden)

    J. Gordon Millichap

    2016-03-01

    Full Text Available Investigators from Teikyo University School of Medicine, Tokyo, Japan, evaluated the clinical features, prognosis, and prophylaxis of cyclic vomiting syndrome and the relationship between the syndrome and levels of adrenocorticotropic/antidiuretic hormones (ACTH/ADH.

  9. Design of a cyclic multiverse

    National Research Council Canada - National Science Library

    Piao, Yun-Song

    2010-01-01

    Recently, it has been noticed that the amplification of the amplitude of curvature perturbation cycle by cycle can lead to a cyclic multiverse scenario, in which the number of universes increases cycle by cycle...

  10. Algebraic curves of maximal cyclicity

    Science.gov (United States)

    Caubergh, Magdalena; Dumortier, Freddy

    2006-01-01

    The paper deals with analytic families of planar vector fields, studying methods to detect the cyclicity of a non-isolated closed orbit, i.e. the maximum number of limit cycles that can locally bifurcate from it. It is known that this multi-parameter problem can be reduced to a single-parameter one, in the sense that there exist analytic curves in parameter space along which the maximal cyclicity can be attained. In that case one speaks about a maximal cyclicity curve (mcc) in case only the number is considered and of a maximal multiplicity curve (mmc) in case the multiplicity is also taken into account. In view of obtaining efficient algorithms for detecting the cyclicity, we investigate whether such mcc or mmc can be algebraic or even linear depending on certain general properties of the families or of their associated Bautin ideal. In any case by well chosen examples we show that prudence is appropriate.

  11. Detecting the Biopolymer Behavior of Graphene Nanoribbons in Aqueous Solution

    Science.gov (United States)

    Wijeratne, Sithara S.; Penev, Evgeni S.; Lu, Wei; Li, Jingqiang; Duque, Amanda L.; Yakobson, Boris I.; Tour, James M.; Kiang, Ching-Hwa

    2016-01-01

    Graphene nanoribbons (GNR), can be prepared in bulk quantities for large-area applications by reducing the product from the lengthwise oxidative unzipping of multiwalled carbon nanotubes (MWNT). Recently, the biomaterials application of GNR has been explored, for example, in the pore to be used for DNA sequencing. Therefore, understanding the polymer behavior of GNR in solution is essential in predicting GNR interaction with biomaterials. Here, we report experimental studies of the solution-based mechanical properties of GNR and their parent products, graphene oxide nanoribbons (GONR). We used atomic force microscopy (AFM) to study their mechanical properties in solution and showed that GNR and GONR have similar force-extension behavior as in biopolymers such as proteins and DNA. The rigidity increases with reducing chemical functionalities. The similarities in rigidity and tunability between nanoribbons and biomolecules might enable the design and fabrication of GNR-biomimetic interfaces. PMID:27503635

  12. Quercetin as natural stabilizing agent for bio-polymer

    Energy Technology Data Exchange (ETDEWEB)

    Morici, Elisabetta [Dipartimento di Ingegneria Chimica, Gestionale, Informatica, Meccanica, Università di Palermo, 90128 Palermo (Italy); Arrigo, Rossella; Dintcheva, Nadka Tzankova [Dipartimento di Ingegneria Civile, Ambientale, Aerospaziale, dei Materiali, Università di Palermo, 90128 Palermo (Italy)

    2014-05-15

    The introduction of antioxidants in polymers is the main way to prevent or delay the degradation process. In particular natural antioxidants receive attention in the food industry also because of their presumed safety. In this work bio-polymers, i.e. a commercial starch-based polymer (Mater-Bi®) and a bio-polyester (PLA), and a bio-polyether (PEO) were additivated with quercetin, a natural flavonoid antioxidants, in order to formulate bio-based films for ecosustainable packaging and outdoor applications. The photo-oxidation behavior of unstabilized and quercetin stabilized films was analyzed and compared with the behavior of films additivated with a commercial synthetic light stabilizer. The quercetin is able to slow down the photo-degradation rate of all bio-polymeric films investigated in similar way to the synthetic stabilizer.

  13. Reconstruction of cellular forces in fibrous biopolymer network

    CERN Document Server

    Zhang, Yunsong; Heizler, Shay; Levine, Herbert

    2016-01-01

    How cells move through 3d extracellular matrix (ECM) is of increasing interest in attempts to understand important biological processes such as cancer metastasis. Just as in motion on 2d surfaces, it is expected that experimental measurements of cell-generated forces will provide valuable information for uncovering the mechanisms of cell migration. Here, we use a lattice-based mechanical model of ECM to study the cellular force reconstruction issue. We conceptually propose an efficient computational scheme to reconstruct cellular forces from the deformation and explore the performance of our scheme in presence of noise, varying marker bead distribution, varying bond stiffnesses and changing cell morphology. Our results show that micromechanical information, rather than merely the bulk rheology of the biopolymer networks, is essential for a precise recovery of cellular forces.

  14. Conjugates of a photoactivated rhodamine with biopolymers for cell staining.

    Science.gov (United States)

    Zaitsev, Sergei Yu; Shaposhnikov, Mikhail N; Solovyeva, Daria O; Solovyeva, Valeria V; Rizvanov, Albert A

    2014-01-01

    Conjugates of the photoactivated rhodamine dyes with biopolymers (proteins, polysaccharides, and nucleic acids) are important tools for microscopic investigation of biological tissue. In this study, a precursor of the photoactivated fluorescent dye (PFD) has been successfully used for staining of numerous mammalian cells lines and for conjugate formation with chitosan ("Chitosan-PFD") and histone H1 ("Histone H1.3-PFD"). The intensive fluorescence has been observed after photoactivation of these conjugates inside cells (A431, HaCaT, HEK239, HBL-100, and MDCK). Developed procedures and obtained data are important for further application of novel precursors of fluorescent dyes ("caged" dyes) for microscopic probing of biological objects. Thus, the synthesized "Chitosan-PFD" and "Histone H1-PFD" have been successfully applied in this study for intracellular transport visualization by fluorescent microscopy.

  15. Parallel multiscale modeling of biopolymer dynamics with hydrodynamic correlations

    CERN Document Server

    Fyta, Maria; Kaxiras, Efthimios; Melchionna, Simone; Bernaschi, Massimo; Succi, Sauro

    2007-01-01

    We employ a multiscale approach to model the translocation of biopolymers through nanometer size pores. Our computational scheme combines microscopic Molecular Dynamics (MD) with a mesoscopic Lattice Boltzmann (LB) method for the solvent dynamics, explicitly taking into account the interactions of the molecule with the surrounding fluid. We describe an efficient parallel implementation of the method which exhibits excellent scalability on the Blue Gene platform. We investigate both dynamical and statistical aspects of the translocation process by simulating polymers of various initial configurations and lengths. For a representative molecule size, we explore the effects of important parameters that enter in the simulation, paying particular attention to the strength of the molecule-solvent coupling and of the external electric field which drives the translocation process. Finally, we explore the connection between the generic polymers modeled in the simulation and DNA, for which interesting recent experimenta...

  16. [Binding of Volatile Organic Compounds to Edible Biopolymers].

    Science.gov (United States)

    Misharina, T A; Terenina, M B; Krikunova, N I; Medvedeva, I B

    2016-01-01

    Capillary gas chromatography was used to study the influence of the composition and structure of different edible polymers (polysaccharides, vegetable fibers, and animal protein gelatin) on the binding of essential oil components. The retention of volatile organic compounds on biopolymers was shown to depend on their molecule structure and the presence, type, and position of a functional group. The maximum extent of the binding was observed for nonpolar terpene and sesquiterpene hydrocarbons, and the minimum extent was observed for alcohols. The components of essential oils were adsorbed due mostly to hydrophobic interactions. It was shown that the composition and structure of a compound, its physico-chemical state, and the presence of functional groups influence the binding. Gum arabic and guar gum were found to bind nonpolar compounds to a maximum and minimum extent, respectively. It was demonstrated the minimum adsorption ability of locust bean gum with respect to all studied compounds.

  17. Carbohydrate nanotechnology: hierarchical assembly using nature's other information carrying biopolymers.

    Science.gov (United States)

    Han, Xu; Zheng, Yeting; Munro, Catherine J; Ji, Yiwen; Braunschweig, Adam B

    2015-08-01

    Despite their central role in directing some of the most complex biological processes, carbohydrates--nature's other information carrying biopolymer--have been largely ignored as building blocks for synthetic hierarchical assemblies. The non-stoichiometric binding and astronomical diversity characteristic of carbohydrates could lead to tantalizingly complex assembly algorithms, but these attributes simultaneously increase the difficulty of preparing carbohydrate assemblies and anticipating their behavior. Convergences in biotechnology, nanotechnology, polymer chemistry, surface science, and supramolecular chemistry have led to many recent important breakthroughs in glycan microarrays and synthetic carbohydrate receptors, where the idiosyncrasies of carbohydrate structure and binding are increasingly considered. We hope to inspire more researchers to consider carbohydrate structure, diversity, and binding as attractive tools for constructing synthetic hierarchical assemblies.

  18. Detecting the Biopolymer Behavior of Graphene Nanoribbons in Aqueous Solution

    Science.gov (United States)

    Wijeratne, Sithara S.; Penev, Evgeni S.; Lu, Wei; Li, Jingqiang; Duque, Amanda L.; Yakobson, Boris I.; Tour, James M.; Kiang, Ching-Hwa

    2016-08-01

    Graphene nanoribbons (GNR), can be prepared in bulk quantities for large-area applications by reducing the product from the lengthwise oxidative unzipping of multiwalled carbon nanotubes (MWNT). Recently, the biomaterials application of GNR has been explored, for example, in the pore to be used for DNA sequencing. Therefore, understanding the polymer behavior of GNR in solution is essential in predicting GNR interaction with biomaterials. Here, we report experimental studies of the solution-based mechanical properties of GNR and their parent products, graphene oxide nanoribbons (GONR). We used atomic force microscopy (AFM) to study their mechanical properties in solution and showed that GNR and GONR have similar force-extension behavior as in biopolymers such as proteins and DNA. The rigidity increases with reducing chemical functionalities. The similarities in rigidity and tunability between nanoribbons and biomolecules might enable the design and fabrication of GNR-biomimetic interfaces.

  19. Evolutionary optimization of biopolymers and sequence structure maps

    Energy Technology Data Exchange (ETDEWEB)

    Reidys, C.M.; Kopp, S.; Schuster, P. [Institut fuer Molekulare Biotechnologie, Jena (Germany)

    1996-06-01

    Searching for biopolymers having a predefined function is a core problem of biotechnology, biochemistry and pharmacy. On the level of RNA sequences and their corresponding secondary structures we show that this problem can be analyzed mathematically. The strategy will be to study the properties of the RNA sequence to secondary structure mapping that is essential for the understanding of the search process. We show that to each secondary structure s there exists a neutral network consisting of all sequences folding into s. This network can be modeled as a random graph and has the following generic properties: it is dense and has a giant component within the graph of compatible sequences. The neutral network percolates sequence space and any two neutral nets come close in terms of Hamming distance. We investigate the distribution of the orders of neutral nets and show that above a certain threshold the topology of neutral nets allows to find practically all frequent secondary structures.

  20. Stiffening of semiflexible biopolymers and cross-linked networks

    CERN Document Server

    Van Dillen, T; Van der Giessen, E

    2006-01-01

    We study the mechanical stiffening behavior in two-dimensional (2D) cross-linked networks of semiflexible biopolymer filaments under simple shear. Filamental constituents immersed in a fluid undergo thermally excited bending motions. Pulling out these undulations results in an increase in the axial stiffness. We analyze this stiffening behavior of 2D semiflexible filaments in detail: we first investigate the average, {static} force-extension relation by considering the initially present undulated configuration that is pulled straight under a tensile force, and compare this result with the average response in which undulation dynamics is allowed during pulling, as derived earlier by MacKintosh and coworkers. We will show that the resulting mechanical behavior is rather similar, but with the axial stiffness being a factor 2 to 4 larger in the dynamic model. Furthermore, we study the stretching contribution in case of extensible filaments and show that, for 2D filaments, the mechanical response is dominated by {...

  1. LassoProt: server to analyze biopolymers with lassos.

    Science.gov (United States)

    Dabrowski-Tumanski, Pawel; Niemyska, Wanda; Pasznik, Pawel; Sulkowska, Joanna I

    2016-07-01

    The LassoProt server, http://lassoprot.cent.uw.edu.pl/, enables analysis of biopolymers with entangled configurations called lassos. The server offers various ways of visualizing lasso configurations, as well as their time trajectories, with all the results and plots downloadable. Broad spectrum of applications makes LassoProt a useful tool for biologists, biophysicists, chemists, polymer physicists and mathematicians. The server and our methods have been validated on the whole PDB, and the results constitute the database of proteins with complex lassos, supported with basic biological data. This database can serve as a source of information about protein geometry and entanglement-function correlations, as a reference set in protein modeling, and for many other purposes.

  2. The Force-Velocity Relation for Growing Biopolymers

    CERN Document Server

    Carlsson, A E

    2000-01-01

    The process of force generation by the growth of biopolymers is simulated via a Langevin-dynamics approach. The interaction forces are taken to have simple forms that favor the growth of straight fibers from solution. The force-velocity relation is obtained from the simulations for two versions of the monomer-monomer force field. It is found that the growth rate drops off more rapidly with applied force than expected from the simplest theories based on thermal motion of the obstacle. The discrepancies amount to a factor of three or more when the applied force exceeds 2.5kT/a, where a is the step size for the polymer growth. These results are explained on the basis of restricted diffusion of monomers near the fiber tip. It is also found that the mobility of the obstacle has little effect on the growth rate, over a broad range.

  3. Conjugates of a Photoactivated Rhodamine with Biopolymers for Cell Staining

    Science.gov (United States)

    Zaitsev, Sergei Yu.; Shaposhnikov, Mikhail N.; Solovyeva, Daria O.; Solovyeva, Valeria V.; Rizvanov, Albert A.

    2014-01-01

    Conjugates of the photoactivated rhodamine dyes with biopolymers (proteins, polysaccharides, and nucleic acids) are important tools for microscopic investigation of biological tissue. In this study, a precursor of the photoactivated fluorescent dye (PFD) has been successfully used for staining of numerous mammalian cells lines and for conjugate formation with chitosan (“Chitosan-PFD”) and histone H1 (“Histone H1.3-PFD”). The intensive fluorescence has been observed after photoactivation of these conjugates inside cells (A431, HaCaT, HEK239, HBL-100, and MDCK). Developed procedures and obtained data are important for further application of novel precursors of fluorescent dyes (“caged” dyes) for microscopic probing of biological objects. Thus, the synthesized “Chitosan-PFD” and “Histone H1-PFD” have been successfully applied in this study for intracellular transport visualization by fluorescent microscopy. PMID:25383365

  4. Multiscale modeling of biopolymer translocation through a nanopore

    CERN Document Server

    Fyta, M G; Kaxiras, E; Succi, S; Fyta, Maria; Melchionna, Simone; Kaxiras, Efthimios; Succi, Sauro

    2007-01-01

    We employ a multiscale approach to model the translocation of biopolymers through nanometer size pores. Our computational scheme combines microscopic Langevin molecular dynamics (MD) with a mesoscopic lattice Boltzmann (LB) method for the solvent dynamics, explicitly taking into account the interactions of the molecule with the surrounding fluid. Both dynamical and statistical aspects of the translocation process were investigated, by simulating polymers of various initial configurations and lengths. For a representative molecule size, we explore the effects of important parameters that enter in the simulation, paying particular attention to the strength of the molecule-solvent coupling and of the external electric field which drives the translocation process. Finally, we explore the connection between the generic polymers modeled in the simulation and DNA, for which interesting recent experimental results are available.

  5. Topologically ordered magnesium-biopolymer hybrid composite structures.

    Science.gov (United States)

    Oosterbeek, Reece N; Seal, Christopher K; Staiger, Mark P; Hyland, Margaret M

    2015-01-01

    Magnesium and its alloys are intriguing as possible biodegradable biomaterials due to their unique combination of biodegradability and high specific mechanical properties. However, uncontrolled biodegradation of magnesium during implantation remains a major challenge in spite of the use of alloying and protective coatings. In this study, a hybrid composite structure of magnesium metal and a biopolymer was fabricated as an alternative approach to control the corrosion rate of magnesium. A multistep process that combines metal foam production and injection molding was developed to create a hybrid composite structure that is topologically ordered in all three dimensions. Preliminary investigations of the mechanical properties and corrosion behavior exhibited by the hybrid Mg-polymer composite structures suggest a new potential approach to the development of Mg-based biomedical devices.

  6. Conjugates of a Photoactivated Rhodamine with Biopolymers for Cell Staining

    Directory of Open Access Journals (Sweden)

    Sergei Yu. Zaitsev

    2014-01-01

    Full Text Available Conjugates of the photoactivated rhodamine dyes with biopolymers (proteins, polysaccharides, and nucleic acids are important tools for microscopic investigation of biological tissue. In this study, a precursor of the photoactivated fluorescent dye (PFD has been successfully used for staining of numerous mammalian cells lines and for conjugate formation with chitosan (“Chitosan-PFD” and histone H1 (“Histone H1.3-PFD”. The intensive fluorescence has been observed after photoactivation of these conjugates inside cells (A431, HaCaT, HEK239, HBL-100, and MDCK. Developed procedures and obtained data are important for further application of novel precursors of fluorescent dyes (“caged” dyes for microscopic probing of biological objects. Thus, the synthesized “Chitosan-PFD” and “Histone H1-PFD” have been successfully applied in this study for intracellular transport visualization by fluorescent microscopy.

  7. Rotating magnetic particle microrheometry in biopolymer fluid dynamics: mucus microrheology.

    Science.gov (United States)

    Besseris, George J; Yeates, Donovan B

    2007-09-14

    The polymer properties of canine mucus were investigated through the method of rotating magnetic particle microrheometry. Mucus is visualized as a physically entangled biopolymer of low polydispersity in a water-based solution. Mucus was modeled according to the constitutive law of a Doi-Edwards fluid. The magnetic-particle equation of rotational motion is analytically solved in the linear viscoelastic limit rendering theoretical flow profiles which are used to fit the experimental trace signals of the particle remanent-magnetic-field decay. The zero-shear-rate viscosity was found to be 18,000 P and the relaxation time at about 42 s. The molecular weight between entanglements for mucins was estimated at 1.7 MDa rendering an estimation of about seven physical cross-links per molecule. Rheological investigations were extended also to diluted and concentrated rations of the normal mucus simulating the conditions found in more physiological extremes.

  8. Interpretation of fluorescence correlation spectra of biopolymer solutions.

    Science.gov (United States)

    Phillies, George D J

    2016-05-01

    Fluorescence correlation spectroscopy (FCS) is regularly used to study diffusion in non-dilute "crowded" biopolymer solutions, including the interior of living cells. For fluorophores in dilute solution, the relationship between the FCS spectrum G(t) and the diffusion coefficient D is well-established. However, the dilute-solution relationship between G(t) and D has sometimes been used to interpret FCS spectra of fluorophores in non-dilute solutions. Unfortunately, the relationship used to interpret FCS spectra in dilute solutions relies on an assumption that is not always correct in non-dilute solutions. This paper obtains the correct form for interpreting FCS spectra of non-dilute solutions, writing G(t) in terms of the statistical properties of the fluorophore motions. Approaches for applying this form are discussed.

  9. Gel Point Determination of Biopolymer Based Semi-IPN Hydrogels

    Science.gov (United States)

    Choudhary, Soumitra; Bhatia, Surita R.

    2008-07-01

    Water-based semi-IPNs (Interpenetrating Polymer Networks) were prepared by mixing two biopolymers, alginate and hydrophobically modified ethylhydroxy ethyl cellulose (HMEHEC), followed by crosslinking the alginate by in-situ release of calcium ions. By altering two different parameters, molecular weight of HMEHEC and calcium crosslinker concentration, we were able to fine tune the rheological properties of the semi-IPNs. Rheological studies in the linear viscoelastic region indicate storage moduli comparable to soft tissue for hydrogels having 90 wt% water. The system is found to be stable over a prolonged period of time, i.e. no phase separation is observed. Uniformity of the structure is confirmed by monotonic behavior of the intensity-q slope in SAXS and SANS over the entire length scale.

  10. Quercetin as natural stabilizing agent for bio-polymer

    Science.gov (United States)

    Morici, Elisabetta; Arrigo, Rossella; Dintcheva, Nadka Tzankova

    2014-05-01

    The introduction of antioxidants in polymers is the main way to prevent or delay the degradation process. In particular natural antioxidants receive attention in the food industry also because of their presumed safety. In this work bio-polymers, i.e. a commercial starch-based polymer (Mater-Bi®) and a bio-polyester (PLA), and a bio-polyether (PEO) were additivated with quercetin, a natural flavonoid antioxidants, in order to formulate bio-based films for ecosustainable packaging and outdoor applications. The photo-oxidation behavior of unstabilized and quercetin stabilized films was analyzed and compared with the behavior of films additivated with a commercial synthetic light stabilizer. The quercetin is able to slow down the photo-degradation rate of all bio-polymeric films investigated in similar way to the synthetic stabilizer.

  11. Cyclic Cushing's syndrome: an overview.

    Science.gov (United States)

    Albiger, Nora Maria Elvira; Scaroni, Carla M; Mantero, Franco

    2007-11-01

    Cyclic Cushing's syndrome (CS) is a disorder in which glucocorticoid levels are alternately normal and high, the latter occurring in episodes that can last from a few days to several months. It is more common in children than in adults. Cyclic CS may be either of the two different forms of CS (ACTH-dependent or -independent CS). Clinically, it may present with one or many symptoms, depending on the duration of disease activity and the timing of the fluctuations. A serotoninergic influence, cyclic changes in central dopaminergic tone, spontaneous episodic hemorrhage in the tumor, and the action of inflammatory cytokines with antitumor properties are some of the mechanisms suggested to explain the physiopathology of this phenomenon but the exact mechanism remains to be clarified. The cyclic pattern of hypercortisolism can delay the final diagnosis of CS and make it difficult to interpret the results of dynamic tests. Patients may have paradoxical responses to dexamethasone that can reflect increasing or decreasing levels of endogenous activity. Hormone assessments have to be repeated periodically when a diagnosis of CS is suspected. The cyclic pattern can also interfere with medical treatment because patients may show unexpected clinical and biochemical signs of hypocortisolism when cortisol secretion cyclically returns to normal, so an accurate follow-up is mandatory in these patients.

  12. Cadmium removal from contaminated soil by tunable biopolymers.

    Science.gov (United States)

    Prabhukumar, Giridhar; Matsumoto, Mark; Mulchandani, Ashok; Chen, Wilfred

    2004-06-01

    An elastin-like polypeptide (ELP) composed of a polyhistidine tail (ELPH12) was exploited as a tunable, metal-binding biopolymer with high affinity toward cadmium. By taking advantage of the property of ELPH12 to undergo a reversible thermal precipitation, easy recovery of the sequestered cadmium from contaminated water was demonstrated as the result of a simple temperature change. In this study, batch soil washing experiments were performed to evaluate the feasibility of using ELPH12 as an environmentally benign strategy for removing cadmium from contaminated soil. The stability constant (log KL) for the cadmium-ELPH12 complex was determined to be 6.8, a value similar to that reported for the biosurfactant rhamnolipid. Two washings with 1.25 mg/mL of ELPH12 were able to remove more than 55% of the bound cadmium as compared to only 8% removal with ELP containing no histidine tail or 21% removal using the same concentration of EDTA. Unlike rhamnolipid from Pseudomonas aeruginosa ATCC 9027, which adsorbs extensively to soil, less than 10% of ELPH12 was adsorbed under all soil washing conditions. As a result, a significantly lower concentration of ELPH12 (0.036 mM as compared to 5-10 mM of biosurfactants) was required to achieve similar extraction efficiencies. However, cadmium recovery by simple precipitation was incomplete due to the displacement of bound cadmium by zinc ions present in soil. Owing to its benign nature, ease of production, and selective tailoring of the metal binding domain toward any target metals of interest, ELP biopolymers may find utility as an effective extractant for heavy metal removal from contaminated soil or ore processing.

  13. Structure and Properties of Polysaccharide Based BioPolymer Gels

    Science.gov (United States)

    Prud'Homme, Robert K.

    2000-03-01

    Nature uses the pyranose ring as the basic building unit for a wideclass of biopolymers. Because of their biological origin these biopolymers naturally find application as food additives, rheology modifiers. These polymers range from being rigid skeletal material, such as cellulose that resist dissolution in water, to water soluble polymers, such as guar or carrageenan. The flexibility of the basic pyranose ring structure to provide materials with such a wide range of properties comes from the specific interactions that can be engineered by nature into the structure. We will present several examples of specific interactions for these systems: hydrogen bonding, hydrophobic interactions, and specific ion interactions. The relationship between molecular interations and rheology will be emphasized. Hydrogen bonding mediated by steric interference is used to control of solubility of starch and the rheology of guar gels. A more interesting example is the hydrogen bonding induced by chemical modification in konjac glucomannan that results in a gel that melts upon cooling. Hydrogen bonding interactions in xanthan lead to gel formation at very low polymer concentrations which is a result of the fine tuning of the polymer persistence length and total contour length. Given the function of xanthan in nature its molecular architecture has been optimized. Hydrophobic interactions in methylcellulose show a reverse temperature dependence arising from solution entropy. Carrageenan gelation upon the addition of specific cations will be addressed to show the interplay of polymer secondary structure on chemical reactivity. And finally the cis-hydroxyls on galactomannans permit crosslinking by a variety of metal ions some of which lead to "living gels" and some of which lead to permanently crosslinked networks.

  14. Load sharing in the growth of bundled biopolymers

    Science.gov (United States)

    Wang, Ruizhe; Carlsson, A. E.

    2014-01-01

    To elucidate the nature of load sharing in the growth of multiple biopolymers, we perform stochastic simulations of the growth of biopolymer bundles against obstacles under a broad range of conditions and varying assumptions. The obstacle motion due to thermal fluctuations is treated explicitly. We assume the “Perfect Brownian Ratchet” (PBR) model, in which the polymerization rate equals the free-filament rate as soon as the filament-obstacle distance exceeds the monomer size. Accurate closed-form formulas are obtained for the case of a rapidly moving obstacle. We find the following: (1) load sharing is usually sub-perfect in the sense that polymerization is slower than for a single filament carrying the same average force; (2) the sub-perfect behavior becomes significant at a total force proportional to the logarithm or the square root of the number of filaments, depending on the alignment of the filaments; (3) for the special case of slow barrier diffusion and low opposing force, an enhanced obstacle velocity for an increasing number of filaments is possible; (4) the obstacle velocity is very sensitive to the alignment of the filaments in the bundle, with a staggered alignment being an order of magnitude faster than an unstaggered one at forces of only 0.5 pN per filament for 20 filaments; (5) for large numbers of filaments, the power is maximized at a force well below 1 pN per filament; (6) for intermediate values of the obstacle diffusion coefficient, the shape of the force velocity relation is very similar to that for rapid obstacle diffusion. PMID:25489273

  15. Nanocomposite Apatite-biopolymer Materials and Coatings for Biomedical Applications

    Directory of Open Access Journals (Sweden)

    L.F. Sukhodub

    2014-04-01

    Full Text Available The microoverview paper describes synthesis and characterization of novel third generation composite biomaterials and coatings which correspond to the second structural level of human bone tissue (HBT organization obtained at Sumy state university “Bionanocomposite” laboratory. To obtain such composites an animal collagen is usually used, which is not potentially safe for medical applications. That is why investigations were started using some other biopolymers to obtain composites close to the second level in the structural hierarchy of HBT. Proposed natural polymers (Na alginate, chitosan are the most perspective because they have bacteriostatic properties for a vast number of aerobic and anaerobic bacteria, high biocompatibility towards the connective tissue, low toxicity, an ability to improve regenerative processes during wounds healing, degradation ability with the creation of chemotaxic activity towards fibroblasts and osteoblasts. The formation of nanosized (25-75 nm calcium deficient hydroxyapatite (cdHA particles in the polymer scaffold approaches the derived material to the biogenic bone tissue, which can provide its more effective implantation. The influence of the imposition of static magnetic field on brushite (CaHPO4·2H2O crystallization was also investigated. It was shown that changing the magnetic field configuration could greatly affect crystallinity and texture of the derived particles. To increase the biocompatibility of existing medical implants (Ti–6Al 4V, Ti Ni, Mg the technology for obtaining bioactive coatings with corresponding mechanical, structural and morphology characteristics is developed in our laboratory. In this direction coatings based on cdHA in combination with biopolymer matrices (Na alginate, chitosan, are obtained in “soft” conditions using a thermal substrate technology. This technology was proposed by Japan scientists [1] and was sufficiently improved by us [2] in order to obtain coatings in

  16. NNDSS - Table IV. Tuberculosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table IV. Tuberculosis - 2014.This Table includes total number of cases reported in the United States, by region and by states, in accordance with the...

  17. NNDSS - Table IV. Tuberculosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table IV. Tuberculosis - 2016.This Table includes total number of cases reported in the United States, by region and by states, in accordance with the...

  18. NNDSS - Table IV. Tuberculosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table IV. Tuberculosis - 2015.This Table includes total number of cases reported in the United States, by region and by states, in accordance with the...

  19. Transitive oriented 3-Hypergraphs of cyclic orders

    OpenAIRE

    2012-01-01

    In this paper we introduce the definition of transitivity for oriented 3-hypergraphs in order to study partial and complete cyclic orders. This definition allow us to give sufficient conditions on a partial cyclic order to be totally extendable. Furthermore, we introduce the 3-hypergraph associated to a cyclic permutation and characterize it in terms of cyclic comparability 3-hypergraphs.

  20. Interplanetary Type IV Bursts

    CERN Document Server

    Hillaris, Alexander; Nindos, Alexander

    2016-01-01

    In this work we study the characteristics of moving type IV radio bursts which extend to the hectometric wavelengths (interplanetary type IV or type IV IP bursts) and their relationship with energetic phenomena on the Sun. Our dataset comprised 48 Interplanetary type IV bursts observed by the Wind/WAVES in the 13.825 MHz?20 KHz frequency range. The dynamic spec tra of the RSTN, DAM, ARTEMIS-IV, CULGOORA, Hiraiso and IZMIRAN Radio-spectrographs were used to track the evolution of the events in the low corona; these were supplemented with SXR ?ux recordings from GOES and CME data from LASCO. Positional information for the coronal bursts were obtained by the Nan\\c{c}ay radioheliograph (NRH). We examined the relationship of the type IV events with coronal radio bursts, CMEs and SXR ?ares. The majority of the events (45) were characterized as compact; their duration was on average 106 min. This type of events were, mostly, associated with M and X class ?ares (40 out of 45) and fast CMEs; 32 of these events had CME...

  1. Effect of chitosan biopolymer and UV/TiO2 method for the de ...

    African Journals Online (AJOL)

    ONOS

    2010-08-23

    Aug 23, 2010 ... Key words: Chitosan biopolymer, UV/TiO2, Acid Blue 40, textile wastewater, spectrophotometer. INTRODUCTION ... the organic bonds and to cause metal ions reduction. Either to treat ... (Taiwan). Instruments and analysis.

  2. Genotoxicity of clays with potential use in biopolymers for food packaging

    DEFF Research Database (Denmark)

    Sharma, Anoop Kumar; Mortensen, Alicja; Hadrup, Niels

    Genotoxicity of clays with potential use in biopolymers for food packaging Plastics produced from biopolymers are of commercial interest as they are manufactured from renewable resources such as agricultural crop wastes and have the potential to meet environmental and health requirements....... Biopolymers that are strengthened using reinforcing nano-scale fillers may improve the packaging quality by increasing barrier function and heat-resistance. Toxicological data on clays containing a nano-fraction and organo-modified clays remain very limited. The aim of this study is to investigate...... the genotoxic potential of clays that can be used in biopolymers for food contact materials. Two clays were tested in the comet assay using Caco-2 cells (a human colon cancer cell line); a natural montmorillonite (Cloisite®Na+) and an organo-modified montmorillonite (Cloisite®30B). Both clays were tested...

  3. Single walled carbon nanotubes functionally adsorbed to biopolymers for use as chemical sensors

    Science.gov (United States)

    Johnson, Jr., Alan T.; Gelperin, Alan; Staii, Cristian

    2011-07-12

    Chemical field effect sensors comprising nanotube field effect devices having biopolymers such as single stranded DNA functionally adsorbed to the nanotubes are provided. Also included are arrays comprising the sensors and methods of using the devices to detect volatile compounds.

  4. Agarose- and alginate-based biopolymers for sample preparation: Excellent green extraction tools for this century.

    Science.gov (United States)

    Sanagi, Mohd Marsin; Loh, Saw Hong; Wan Ibrahim, Wan Nazihah; Pourmand, Neda; Salisu, Ahmed; Wan Ibrahim, Wan Aini; Ali, Imran

    2016-03-01

    Recently, there has been considerable interest in the use of miniaturized sample preparation techniques before the chromatographic monitoring of the analytes in unknown complex compositions. The use of biopolymer-based sorbents in solid-phase microextraction techniques has achieved a good reputation. A great variety of polysaccharides can be extracted from marine plants or microorganisms. Seaweeds are the major sources of polysaccharides such as alginate, agar, agarose, as well as carrageenans. Agarose and alginate (green biopolymers) have been manipulated for different microextraction approaches. The present review is focused on the classification of biopolymer and their applications in multidisciplinary research. Besides, efforts have been made to discuss the state-of-the-art of the new microextraction techniques that utilize commercial biopolymer interfaces such as agarose in liquid-phase microextraction and solid-phase microextraction.

  5. Numerical simulation of conformational variability in biopolymer translocation through wide nanopores

    CERN Document Server

    Fyta, Maria; Bernaschi, Massimo; Kaxiras, Efthimios; Succi, Sauro

    2009-01-01

    Numerical results on the translocation of long biopolymers through mid-sized and wide pores are presented. The simulations are based on a novel methodology which couples molecular motion to a mesoscopic fluid solvent. Thousands of events of long polymers (up to 8000 monomers) are monitored as they pass through nanopores. Comparison between the different pore sizes shows that wide pores can host a larger number of multiple biopolymer segments, as compared to smaller pores. The simulations provide clear evidence of folding quantization in the translocation process as the biopolymers undertake multi-folded configurations, characterized by a well-defined integer number of folds. Accordingly, the translocation time is no longer represented by a single-exponent power law dependence on the length, as it is the case for single-file translocation through narrow pores. The folding quantization increases with the biopolymer length, while the rate of translocated beads at each time step is linearly correlated to the numb...

  6. Hydrogels from Biopolymer Hybrid for Biomedical, Food, and Functional Food Applications

    Directory of Open Access Journals (Sweden)

    Robert C. Spiro

    2012-04-01

    Full Text Available Hybrid hydrogels from biopolymers have been applied for various indications across a wide range of biomedical, pharmaceutical, and functional food industries. In particular, hybrid hydrogels synthesized from two biopolymers have attracted increasing attention. The inclusion of a second biopolymer strengthens the stability of resultant hydrogels and enriches its functionalities by bringing in new functional groups or optimizing the micro-environmental conditions for certain biological and biochemical processes. This article presents approaches that have been used by our groups to synthesize biopolymer hybrid hydrogels for effective uses for immunotherapy, tissue regeneration, food and functional food applications. The research has achieved some challenging results, such as stabilizing physical structure, increasing mucoadhesiveness, and the creation of an artificial extracellular matrix to aid in guiding tissue differentiation.

  7. Photoluminescence intensity enhancement in SWNT aqueous suspensions due to reducing agent doping: Influence of adsorbed biopolymer

    Science.gov (United States)

    Kurnosov, N. V.; Leontiev, V. S.; Linnik, A. S.; Lytvyn, O. S.; Karachevtsev, V. A.

    2014-06-01

    The influence of biopolymer wrapped around nanotube on the enhancement of the semiconducting single-walled carbon nanotube (SWNT) photoluminescence (PL) in aqueous suspension which increases due to the reducing agent dithiothreitol (DTT) doping effect was revealed. The greatest enhancement of PL was observed for SWNTs covered with double- or single stranded DNA (above 170%) and DTT weak influence was revealed for SWNTs:polyC suspension (∼45%). The magnitude of the PL enhancement depends also on nanotube chirality and sample aging. The behavior of PL from SWNTs covered with various polymers is explained by the different biopolymers ordering on the nanotube surface. The ordered polymer conformation on the nanotube weakens the reducing agent doping effect. The method of reducing agent doping of nanotube:biopolymer aqueous suspension can serve as a sensitive luminescent probe of the biopolymer ordering on the carbon nanotube and can be used to increase the sensitivity of luminescent biosensors.

  8. Ion-ion reactions for charge reduction of biopolymer at atmospheric pressure ambient

    Institute of Scientific and Technical Information of China (English)

    Yue Ming Zhou; Jian Hua Ding; Xie Zhang; Huan Wen Chen

    2007-01-01

    Extractive electrospray ionization source (EESI) was adapted for ion-ion reaction, which was demonstrated by using a linear quadrupole ion trap mass spectrometer for the first ion-ion reaction of biopolymers in the atmospheric pressure ambient.

  9. Binary and Ternary Mixtures of Biopolymers and Water: Viscosity, Refractive Index, and Density

    Science.gov (United States)

    Silva, Bárbara Louise L. D.; Costa, Bernardo S.; Garcia-Rojas, Edwin E.

    2016-08-01

    Biopolymers have been the focus of intense research because of their wide applicability. The thermophysical properties of solutions containing biopolymers have fundamental importance for engineering calculations, as well as for thermal load calculations, energy expenditure, and development of new products. In this work, the thermophysical properties of binary and ternary solutions of carboxymethylcellulose and/or high methoxylation pectin and water at different temperatures have been investigated taking into consideration different biopolymer concentrations. The experimental data related to the thermophysical properties were correlated to obtain empirical models that can describe the temperature-concentration combined effect on the density, refractive index, and dynamic viscosity. From data obtained from the experiments, the density, refractive index, and dynamic viscosity increase with increasing biopolymer concentration and decrease with increasing temperature. The polynomial models showed a good fit to the experimental data and high correlation coefficients (R2ge 0.98) for each studied system.

  10. Quantized current blockade and hydrodynamic correlations in biopolymer translocation through nanopores: evidence from multiscale simulations

    CERN Document Server

    Bernaschi, Massimo; Succi, Sauro; Fyta, Maria; Kaxiras, Efthimios

    2008-01-01

    We present a detailed description of biopolymer translocation through a nanopore in the presence of a solvent, using an innovative multi-scale methodology which treats the biopolymer at the microscopic scale as combined with a self-consistent mesoscopic description for the solvent fluid dynamics. We report evidence for quantized current blockade depending on the folding configuration and offer detailed information on the role of hydrodynamic correlations in speeding-up the translocation process.

  11. Interactions Between Biopolymers and Surfactants with Focus on Fluorosurfactants and Proteins

    OpenAIRE

    Macáková, Lubica

    2007-01-01

    The aim of this thesis was to obtain a better understanding of the association between surfactants and biopolymers in bulk solutions and at solid/aqueous liquid interface. In order to do this, the interactions between surfactants and biopolymers were investigated with a variety of experimental techniques. The main focus has been on the interactions between fluorosurfactants and proteins, which are important during electrophoresis of proteins in silica capillaries. Electrophoretic separation o...

  12. Defect-tolerant single-electron charging at room temperature in metal nanoparticle decorated biopolymers

    Energy Technology Data Exchange (ETDEWEB)

    Berven, C.A.; Clarke, L.; Wybourne, M.N. [Dartmouth Coll., Hanover, NH (United States). Dept. of Physics and Astronomy; Mooster, J.L.; Hutchison, J.E. [Oregon Univ., Eugene, OR (United States). Dept. of Chemistry

    2001-01-16

    Gold nanoparticles assembled on a biopolymer template between metal electrodes on an insulating substrate are shown to exhibit unambiguous single electron charging effects that are found to depend on the nanoparticle properties and the geometrical contraints imposed by the biopolymer. The results support the idea of using nanoparticles in conjunction with biomolecular organization to produce nanoscale systems with defect-tolerant current-voltage behavior. (orig.)

  13. Low-Cost Foods and Drugs Using Immobilized Enzymes on Biopolymers

    OpenAIRE

    Elnashar, Magdy

    2010-01-01

    The modification of carrageenan and alginate biopolymers with chitosan/PEI imparts three extra benefits to these biopolymers. The first is the creation of a new amino groups functionality; the second, is the amelioration of the gel's thermal stability by forming a polyelectrolyte complex (PEC), while the third is the use of the free amino groups to covalently immobilize enzymes, via glutaraldehyde, as a mediator and a crosslinker. Three industrial enzymes were immobilized using the modified g...

  14. Photoacoustic monitoring of water transport process in calcareous stone coated with biopolymers

    Science.gov (United States)

    May-Crespo, J.; Ortega-Morales, B. O.; Camacho-Chab, J. C.; Quintana, P.; Alvarado-Gil, J. J.; Gonzalez-García, G.; Reyes-Estebanez, M.; Chan-Bacab, M. J.

    2016-12-01

    Moisture is a critical control of chemical and physical processes leading to stone deterioration. These processes can be enhanced by microbial biofilms and associated exopolymers (EPS). There is limited current understanding of the water transport process across rocks covered by EPS. In the present work, we employed the photoacoustic technique to study the influence of three biopolymers (xanthan, microbactan and arabic gum) in the water transport process of two types of limestone rock of similar mineralogy but contrasting porosity. Both controls of RL (low porosity) and RP (high porosity) presented the higher values of water diffusion coefficient ( D) than biopolymer-coated samples, indicating that biopolymer layers slowed down the transport of water. This trend was steeper for RP samples as water was transported seven times faster than in the more porous rock. Important differences of D values were observed among samples coated by different biopolymers. Scanning electron microscopy and optical microscopy showed that surface topography was different between both types of rocks; adherence of coatings was seen predominantly in the less porous rocks samples. FTIR and NMR analysis showed the presence of pyruvate and acetate in microbactan and xanthan gum, suggesting their participation on adherence to the calcareous surfaces, sealing surface pores. These results indicate that water transport at rock interfaces is dependent on the chemistry of biopolymer and surface porosity. The implications for reduced water transport in stone conservation under the influence of biopolymers include both enhanced and lower deterioration rates along with altered efficiency of biocide treatment of epilithic biofilms.

  15. Magnesium sulphate increases lymphocyte adenosine 3':5'-cyclic monophosphate in humans.

    Science.gov (United States)

    Von Mandach, U; Bürgi, M; Huch, R; Huch, A

    1993-01-01

    We determined the effect of i.v. magnesium sulphate, which is often combined with beta 2-adrenoceptor agonists for tocolytic therapy, on lymphocyte cyclic AMP production, extracellular magnesium and blood calcium concentrations. Sixteen healthy volunteers received i.v. magnesium sulphate 1 g h-1 over 8 h; seven volunteers also had infusion of NaCl 18 mg h-1 as control. Venous blood was taken pre- and post-infusion to determine basal lymphocyte cyclic AMP and the increase evoked by 0.1 mM isoprenaline, as well as serum and plasma concentrations of total and non-protein-bound magnesium and calcium. Following magnesium sulphate there was a significant rise in the isoprenaline-evoked increase in cyclic AMP (P < 0.05) and in the magnesium concentrations (P < 0.01) and a decrease in the free calcium concentration (P < 0.01). PMID:8385975

  16. Magnesium sulphate increases lymphocyte adenosine 3':5'-cyclic monophosphate in humans.

    Science.gov (United States)

    Von Mandach, U; Bürgi, M; Huch, R; Huch, A

    1993-03-01

    We determined the effect of i.v. magnesium sulphate, which is often combined with beta 2-adrenoceptor agonists for tocolytic therapy, on lymphocyte cyclic AMP production, extracellular magnesium and blood calcium concentrations. Sixteen healthy volunteers received i.v. magnesium sulphate 1 g h-1 over 8 h; seven volunteers also had infusion of NaCl 18 mg h-1 as control. Venous blood was taken pre- and post-infusion to determine basal lymphocyte cyclic AMP and the increase evoked by 0.1 mM isoprenaline, as well as serum and plasma concentrations of total and non-protein-bound magnesium and calcium. Following magnesium sulphate there was a significant rise in the isoprenaline-evoked increase in cyclic AMP (P < 0.05) and in the magnesium concentrations (P < 0.01) and a decrease in the free calcium concentration (P < 0.01).

  17. Investigation on Concentrated V(IV)/V(V) Redox Reaction by Rotating Disc Voltammetry

    Institute of Scientific and Technical Information of China (English)

    WEN Yue-Hua; ZHANG Hua-Min; QIAN Peng; MA Hai-Peng; YI Bao-Lian; YANG Yu-Sheng

    2007-01-01

    The kinetic characteristics of the concentrated V(IV)/V(V) couple have been studied at a glassy carbon electrode in sulfuric acid using rotating-disc electrode and cyclic voltammetry. The kinetics of the V(IV)/V(V) redox couple reaction was found to be electrochemically quasi-reversible with the slower kinetics for the V(V) reduction than that for the V(IV) oxidation. And, dependence of diffusion coefficients and kinetic parameters of V(IV) species on the V(IV) and H25O4 concentration was investigated. It is shown that the concentration of active species V(IV)centration, the diffusion coefficients of V(IV) were gradually reduced whereas its kinetics was improved considerably,espicially in the case of Ⅴ(Ⅳ)and H2SO4 up to 2 and 4 mol·L-1.

  18. Interplanetary Type IV Bursts

    Science.gov (United States)

    Hillaris, A.; Bouratzis, C.; Nindos, A.

    2016-08-01

    We study the characteristics of moving type IV radio bursts that extend to hectometric wavelengths (interplanetary type IV or type {IV}_{{IP}} bursts) and their relationship with energetic phenomena on the Sun. Our dataset comprises 48 interplanetary type IV bursts observed with the Radio and Plasma Wave Investigation (WAVES) instrument onboard Wind in the 13.825 MHz - 20 kHz frequency range. The dynamic spectra of the Radio Solar Telescope Network (RSTN), the Nançay Decametric Array (DAM), the Appareil de Routine pour le Traitement et l' Enregistrement Magnetique de l' Information Spectral (ARTEMIS-IV), the Culgoora, Hiraso, and the Institute of Terrestrial Magnetism, Ionosphere and Radio Wave Propagation (IZMIRAN) Radio Spectrographs were used to track the evolution of the events in the low corona. These were supplemented with soft X-ray (SXR) flux-measurements from the Geostationary Operational Environmental Satellite (GOES) and coronal mass ejections (CME) data from the Large Angle and Spectroscopic Coronagraph (LASCO) onboard the Solar and Heliospheric Observatory (SOHO). Positional information of the coronal bursts was obtained by the Nançay Radioheliograph (NRH). We examined the relationship of the type IV events with coronal radio bursts, CMEs, and SXR flares. The majority of the events (45) were characterized as compact, their duration was on average 106 minutes. This type of events was, mostly, associated with M- and X-class flares (40 out of 45) and fast CMEs, 32 of these events had CMEs faster than 1000 km s^{-1}. Furthermore, in 43 compact events the CME was possibly subjected to reduced aerodynamic drag as it was propagating in the wake of a previous CME. A minority (three) of long-lived type {IV}_{{IP}} bursts was detected, with durations from 960 minutes to 115 hours. These events are referred to as extended or long duration and appear to replenish their energetic electron content, possibly from electrons escaping from the corresponding coronal

  19. Manual for Cyclic Triaxial Test

    DEFF Research Database (Denmark)

    Shajarati, Amir; Sørensen, Kris Wessel; Nielsen, Søren Kjær

    /dynamic triaxial cell is overall constructed in the same way as the static triaxial cell at Aalborg University, but with the ability to apply any kind of load sequence to the test sample. When conducting cyclic triaxial tests, it is recommended that the manual is followed very tediously since there are many steps...... and if they are done improperly or in the wrong order there is a risk of destroying the test sample or obtaining invalid results.......This manual describes the different steps that is included in the procedure for conducting a cyclic triaxial test at the geotechnical Laboratory at Aalborg University. Furthermore it contains a chapter concerning some of the background theory for the static triaxial tests. The cyclic...

  20. Systemic Antibacterial Activity of Novel Synthetic Cyclic Peptides

    Science.gov (United States)

    Dartois, Véronique; Sanchez-Quesada, Jorge; Cabezas, Edelmira; Chi, Ellen; Dubbelde, Chad; Dunn, Carrie; Granja, Juan; Gritzen, Colleen; Weinberger, Dana; Ghadiri, M. Reza; Parr, Thomas R.

    2005-01-01

    Cyclic peptides with an even number of alternating d,l-α-amino acid residues are known to self-assemble into organic nanotubes. Such peptides previously have been shown to be stable upon protease treatment, membrane active, and bactericidal and to exert antimicrobial activity against Staphylococcus aureus and other gram-positive bacteria. The present report describes the in vitro and in vivo pharmacology of selected members of this cyclic peptide family. The intravenous (i.v.) efficacy of six compounds with MICs of less than 12 μg/ml was tested in peritonitis and neutropenic-mouse thigh infection models. Four of the six peptides were efficacious in vivo, with 50% effective doses in the peritonitis model ranging between 4.0 and 6.7 mg/kg against methicillin-sensitive S. aureus (MSSA). In the thigh infection model, the four peptides reduced the bacterial load 2.1 to 3.0 log units following administration of an 8-mg/kg i.v. dose. Activity against methicillin-resistant S. aureus was similar to MSSA. The murine pharmacokinetic profile of each compound was determined following i.v. bolus injection. Interestingly, those compounds with poor efficacy in vivo displayed a significantly lower maximum concentration of the drug in serum and a higher volume of distribution at steady state than compounds with good therapeutic properties. S. aureus was unable to easily develop spontaneous resistance upon prolonged exposure to the peptides at sublethal concentrations, in agreement with the proposed interaction with multiple components of the bacterial membrane canopy. Although additional structure-activity relationship studies are required to improve the therapeutic window of this class of antimicrobial peptides, our results suggest that these amphipathic cyclic d,l-α-peptides have potential for systemic administration and treatment of otherwise antibiotic-resistant infections. PMID:16048940

  1. Hopf cyclic cohomology and transverse characteristic classes

    CERN Document Server

    Moscovici, Henri

    2010-01-01

    By refining the cyclic cohomological apparatus for computing the Hopf cyclic cohomology of the Hopf algebras associated to infinite primitive Cartan-Lie pseudogroup, we explicitly identify, as a Hopf cyclic complex, the image of the canonical homomorphism from the Gelfand-Fuks complex to the Bott complex for equivariant cohomology. Distinct from the original realization due to A. Connes and the first named author of the cyclic cohomology of such Hopf algebras as differentiable cyclic cohomology, this construction provides a convenient front-end model for their Hopf cyclic cohomology. Relying on it, we produce characteristic homomorphisms from newly developed models for Hopf cyclic characteristic classes to the cyclic cohomology of the convolution algebras of \\'etale holonomy groupoids, which in particular work in the relative case with no compactness restriction. As an illustration, we apply the latter feature to transfer the universal Hopf cyclic Chern classes found by us in a previous paper, and produce in ...

  2. Dispersion of cellulose nanofibers in biopolymer based nanocomposites

    Science.gov (United States)

    Wang, Bei

    The focus of this work was to understand the fundamental dispersion mechanism of cellulose based nanofibers in bionanocomposites. The cellulose nanofibers were extracted from soybean pod and hemp fibers by chemo-mechanical treatments. These are bundles of cellulose nanofibers with a diameter ranging between 50 to 100 nm and lengths of thousands of nanometers which results in very high aspect ratio. In combination with a suitable matrix polymer, cellulose nanofiber networks show considerable potential as an effective reinforcement for high quality specialty applications of bio-based nanocomposites. Cellulose fibrils have a high density of --OH groups on the surface, which have a tendency to form hydrogen bonds with adjacent fibrils, reducing interaction with the surrounding matrix. The use of nanofibers has been mostly restricted to water soluble polymers. This thesis is focused on synthesizing the nanocomposite using a solid phase matrix polypropylene (PP) or polyethylene (PE) by hot compression and poly (vinyl alcohol) (PVA) in an aqueous phase by film casting. The mechanical properties of nanofiber reinforced PVA film demonstrated a 4-5 fold increase in tensile strength, as compared to the untreated fiber-blend-PVA film. It is necessary to reduce the entanglement of the fibrils and improve their dispersion in the matrix by surface modification of fibers without deteriorating their reinforcing capability. Inverse gas chromatography (IGC) was used to explore how various surface treatments would change the dispersion component of surface energy and acid-base character of cellulose nanofibers and the effect of the incorporation of these modified nanofibers into a biopolymer matrix on the properties of their nano-composites. Poly (lactic acid) (PLA) and polyhydroxybutyrate (PHB) based nanocomposites using cellulose nanofibers were prepared by extrusion, injection molding and hot compression. The IGC results indicated that styrene maleic anhydride coated and ethylene

  3. Design of a cyclic multiverse

    Energy Technology Data Exchange (ETDEWEB)

    Piao Yunsong, E-mail: yspiao@gucas.ac.c [College of Physical Sciences, Graduate School of Chinese Academy of Sciences, Beijing 100049 (China)

    2010-08-09

    Recently, it has been noticed that the amplification of the amplitude of curvature perturbation cycle by cycle can lead to a cyclic multiverse scenario, in which the number of universes increases cycle by cycle. However, this amplification will also inevitably induce either the ultimate end of corresponding cycle, or the resulting spectrum of perturbations inside corresponding universe is not scale invariant, which baffles the existence of observable universes. In this Letter, we propose a design of a cyclic multiverse, in which the observable universe can emerges naturally. The significance of a long period of dark energy before the turnaround of each cycle for this implementing is shown.

  4. Recursive processing of cyclic graphs.

    Science.gov (United States)

    Bianchini, Monica; Gori, Marco; Sarti, Lorenzo; Scarselli, Franco

    2006-01-01

    Recursive neural networks are a powerful tool for processing structured data. According to the recursive learning paradigm, the input information consists of directed positional acyclic graphs (DPAGs). In fact, recursive networks are fed following the partial order defined by the links of the graph. Unfortunately, the hypothesis of processing DPAGs is sometimes too restrictive, being the nature of some real-world problems intrinsically cyclic. In this paper, a methodology is proposed, which allows us to process any cyclic directed graph. Therefore, the computational power of recursive networks is definitely established, also clarifying the underlying limitations of the model.

  5. Synthesis and characterization of thorium(IV) and uranium(IV) corrole complexes.

    Science.gov (United States)

    Ward, Ashleigh L; Buckley, Heather L; Lukens, Wayne W; Arnold, John

    2013-09-18

    The first examples of actinide complexes incorporating corrole ligands are presented. Thorium(IV) and uranium(IV) macrocycles of Mes2(p-OMePh)corrole were synthesized via salt metathesis with the corresponding lithium corrole in remarkably high yields (93% and 83%, respectively). Characterization by single-crystal X-ray diffraction revealed both complexes to be dimeric, having two metal centers bridged via bis(μ-chlorido) linkages. In each case, the corrole ring showed a large distortion from planarity, with the Th(IV) and U(IV) ions residing unusually far (1.403 and 1.330 Å, respectively) from the N4 plane of the ligand. (1)H NMR spectroscopy of both the Th and U dimers revealed dynamic solution behavior. In the case of the diamagnetic thorium corrole, variable-temperature, DOSY (diffusion-ordered) and EXSY (exhange) (1)H NMR spectroscopy was employed and supported that this behavior was due to an intrinsic pseudorotational mode of the corrole ring about the M-M axis. Additionally, the electronic structure of the actinide corroles was assessed using UV-vis spectroscopy, cyclic voltammetry, and variable-temperature magnetic susceptibility. This novel class of macrocyclic complexes provides a rich platform in an underdeveloped area for the study of nonaqueous actinide bonding and reactivity.

  6. IV access in dental practice.

    LENUS (Irish Health Repository)

    Fitzpatrick, J J

    2009-04-01

    Intravenous (IV) access is a valuable skill for dental practitioners in emergency situations and in IV sedation. However, many people feel some apprehension about performing this procedure. This article explains the basic principles behind IV access, and the relevant anatomy and physiology, as well as giving a step-by-step guide to placing an IV cannula.

  7. On the suppression of superconducting phase formation in YBCO materials by templated synthesis in the presence of a sulfated biopolymer

    Energy Technology Data Exchange (ETDEWEB)

    Smith, Elliott; Schnepp, Zoe [Centre for Organized Matter Chemistry, School of Chemistry, University of Bristol, Cantock' s Close, Bristol BS8 1TS (United Kingdom); Wimbush, Stuart C. [Department of Materials Science and Metallurgy, University of Cambridge, Pembroke Street, Cambridge CB2 3QZ (United Kingdom); Hall, Simon R. [Centre for Organized Matter Chemistry, School of Chemistry, University of Bristol, Cantock' s Close, Bristol BS8 1TS (United Kingdom)], E-mail: simon.hall@bristol.ac.uk

    2008-11-15

    The use of biopolymers as templates to control superconductor crystallization is a recent phenomenon and is generating a lot of interest both from the superconductor community and in materials chemistry circles. This work represents a critical finding in the use of such biopolymers, in particular the contraindicatory nature of sulfur when attempting to affect a morphologically controlled synthesis. Synthesis of superconducting nanoparticles was attempted using carrageenan as a morphological template. Reactive sulfate groups on the biopolymer prevent this, producing instead significant quantities of barium sulfate nanotapes. By substituting the biopolymer for structurally analogous, non-sulfated agar, we show that superconducting nanoparticles could be successfully synthesized.

  8. Elasticity of cross-linked semiflexible biopolymers under tension

    CERN Document Server

    von der Heydt, Alice; Benetatos, Panayotis; Zippelius, Annette

    2013-01-01

    Aiming at the mechanical properties of cross-linked biopolymers, we set up and analyze a model of two weakly bending wormlike chains subjected to a tensile force, with regularly spaced inter-chain bonds (cross-links) represented by harmonic springs. Within this model, we compute the force-extension curve and the differential stiffness exactly and discuss several limiting cases. Cross-links effectively stiffen the chain pair by reducing thermal fluctuations transverse to the force and alignment direction. The extra alignment due to cross-links increases both with growing number and with growing strength of the cross-links, and is most prominent for small force f. For large f, the additional, cross-link-induced extension is subdominant except for the case of linking the chains rigidly and continuously along their contour. In this combined limit, we recover asymptotically the elasticity of a weakly bending wormlike chain without constraints, stiffened by a factor four. The increase in differential stiffness can ...

  9. Phase Segregation in Individually Dried Particles Composed of Biopolymers.

    Science.gov (United States)

    Nuzzo, Marine; Sloth, Jakob; Bergenstahl, Björn; Millqvist-Fureby, Anna

    2015-10-13

    Mixing of two biopolymers can results in phase separation due to their thermodynamically incompatibility under certain conditions. This phenomenon was first reported when the solution was allowed to equilibrate, but it has later been observed also as a consequence of drying. The challenges of this study were to observe phase segregation by confocal Raman microscopy and LV-SEM on dried film, individually dried particles, and spray dried particles. The influence of the solid content and the phase ratio (composition) of a HPMC/maltodextrin mixture on the localization of the ingredients in the individually dried particles was investigated. We observed that phase segregation of HPMC and maltodextrin is induced by solvent evaporation in film drying, single particle drying, as well as spray drying. The phase ratio is an important parameter that influences the localization of the HPMC-enriched phase and maltodextrin-enriched phase, i.e., to the particle surface, to the core, or in a more or less bicontinuous pattern. The drying time, affected by the solids content, was found to control the level of advancement of the phase segregation.

  10. Elasticity of cross-linked semiflexible biopolymers under tension.

    Science.gov (United States)

    von der Heydt, Alice; Wilkin, Daniel; Benetatos, Panayotis; Zippelius, Annette

    2013-09-01

    Aiming at the mechanical properties of cross-linked biopolymers, we set up and analyze a model of two weakly bending wormlike chains subjected to a tensile force, with regularly spaced inter-chain bonds (cross-links) represented by harmonic springs. Within this model, we compute the force-extension curve and the differential stiffness exactly and discuss several limiting cases. Cross-links effectively stiffen the chain pair by reducing thermal fluctuations transverse to the force and alignment direction. The extra alignment due to cross-links increases both with growing number and with growing strength of the cross-links, and is most prominent for small force f. For large f, the additional, cross-link-induced extension is subdominant except for the case of linking the chains rigidly and continuously along their contour. In this combined limit, we recover asymptotically the elasticity of a weakly bending wormlike chain without constraints, stiffened by a factor of 4. The increase in differential stiffness can be as large as 100% for small f or large numbers of cross-links.

  11. Refolding dynamics of stretched biopolymers upon force quench

    CERN Document Server

    Hyeon, Changbong; Pincus, David L; Thirumalai, D

    2009-01-01

    Single molecule force spectroscopy methods can be used to generate folding trajectories of biopolymers from arbitrary regions of the folding landscape. We illustrate the complexity of the folding kinetics and generic aspects of the collapse of RNA and proteins upon force quench, using simulations of an RNA hairpin and theory based on the de Gennes model for homopolymer collapse. The folding time, $\\tau_F$, depends asymmetrically on $\\delta f_S = f_S - f_m$ and $\\delta f_Q = f_m - f_Q$ where $f_S$ ($f_Q$) is the stretch (quench) force, and $f_m$ is the transition mid-force of the RNA hairpin. In accord with experiments, the relaxation kinetics of the molecular extension, $R(t)$, occurs in three stages: a rapid initial decrease in the extension is followed by a plateau, and finally an abrupt reduction in $R(t)$ that occurs as the native state is approached. The duration of the plateau increases as $\\lambda =\\tau_Q/\\tau_F$ decreases (where $\\tau_Q$ is the time in which the force is reduced from $f_S$ to $f_Q$). ...

  12. Strain induced critical behavior in athermal biopolymer networks

    Science.gov (United States)

    Sharma, Abhinav; Licup, Albert; Rens, Robbie; Sheinman, Michael; Jansen, Karin; Koenderink, Gijse; Mackintosh, Fred

    2015-03-01

    Biopolymer networks exhibit highly interesting mechanical behavior. An instructive model system is that of a network composed of rope-like filaments-zero resistance to compression but finite resistance to stretching. For networks with connectivity below Maxwell point,there is no elastic modulus for small deformations. However,when networks are subjected to an external strain, stiffness emerges spontaneously beyond a critical strain. We demonstrate that the spontaneous emergence of elasticity is analogous to a continuous phase transition. The critical point is not fixed but depends on the geometry of the underlying network.The elastic behavior near the critical point can be described analogous to that of Magnetization in ferromagnetic material near the curie temperature.Surprisingly, the critical exponents are independent of the dimensionality and depend only on the average connectivity in the network.By including bending interactions in the rope network, we can capture the mechanical behavior of biologically relevant networks.Bending rigidity acts as a coupling constant analogous to the external magnetic field in a ferromagnetic system.We show that nonlinear mechanics of collagen are successfully captured by our framework of regarding nonlinear mechanics as a critical phenomenon

  13. New Guar Biopolymer Silver Nanocomposites for Wound Healing Applications

    Directory of Open Access Journals (Sweden)

    Runa Ghosh Auddy

    2013-01-01

    Full Text Available Wound healing is an innate physiological response that helps restore cellular and anatomic continuity of a tissue. Selective biodegradable and biocompatible polymer materials have provided useful scaffolds for wound healing and assisted cellular messaging. In the present study, guar gum, a polymeric galactomannan, was intrinsically modified to a new cationic biopolymer guar gum alkylamine (GGAA for wound healing applications. Biologically synthesized silver nanoparticles (Agnp were further impregnated in GGAA for extended evaluations in punch wound models in rodents. SEM studies showed silver nanoparticles well dispersed in the new guar matrix with a particle size of ~18 nm. In wound healing experiments, faster healing and improved cosmetic appearance were observed in the new nanobiomaterial treated group compared to commercially available silver alginate cream. The total protein, DNA, and hydroxyproline contents of the wound tissues were also significantly higher in the treated group as compared with the silver alginate cream (P<0.05. Silver nanoparticles exerted positive effects because of their antimicrobial properties. The nanobiomaterial was observed to promote wound closure by inducing proliferation and migration of the keratinocytes at the wound site. The derivatized guar gum matrix additionally provided a hydrated surface necessary for cell proliferation.

  14. Thermal Behavior of Tacca leontopetaloides Starch-Based Biopolymer

    Directory of Open Access Journals (Sweden)

    Nurul Shuhada Mohd Makhtar

    2013-01-01

    Full Text Available Starch is used whenever there is a need for natural elastic properties combined with low cost of production. However, the hydrophilic properties in structural starch will decrease the thermal performance of formulated starch polymer. Therefore, the effect of glycerol, palm olein, and crude palm oil (CPO, as plasticizers, on the thermal behavior of Tacca leontopetaloides starch incorporated with natural rubber in biopolymer production was investigated in this paper. Four different formulations were performed and represented by TPE1, TPE2, TPE3, and TPE4. The compositions were produced by using two-roll mill compounding. The sheets obtained were cut into small sizes prior to thermal testing. The addition of glycerol shows higher enthalpy of diffusion in which made the material easily can be degraded, leaving to an amount of 6.6% of residue. Blending of CPO with starch (TPE3 had a higher thermal resistance towards high temperature up to 310°C and the thermal behavior of TPE2 only gave a moderate performance compared with other TPEs.

  15. Permeability and Tensile Strength of Concrete with Arabic Gum Biopolymer

    Directory of Open Access Journals (Sweden)

    Abdeliazim Mustafa Mohamed

    2017-01-01

    Full Text Available The use of materials of vegetal origin is increasingly being promoted in many industries due to their cost effectiveness and the rising sensitivity to environmental protection and sustainability. Arabic Gum Biopolymer (AGB is a wild plant byproduct that is abundantly found in Sudan and is also produced in other African countries. It has long been used in various industries. However, its utilization is very limited in the construction sector although there appears to be a significant potential for use of AGB in the building industry. As an example, there is evidence that AGB may be an effective additive to concrete mixes that would improve fresh and hardened concrete properties. The aim of the present work is to provide further experimental evidence on the improvement that can be achieved in the physical and mechanical properties of hardened concrete when AGB is added to the mixture. The experimental results show a significant reduction in permeability for an optimum percentage of AGB and an increase in flexural and tensile strength and in the elastic modulus.

  16. Injectable biopolymer based hydrogels for drug delivery applications.

    Science.gov (United States)

    Atta, Sadia; Khaliq, Shaista; Islam, Atif; Javeria, Irtaza; Jamil, Tahir; Athar, Muhammad Makshoof; Shafiq, Muhammad Imtiaz; Ghaffar, Abdul

    2015-09-01

    Biopolymer based pH-sensitive hydrogels were prepared using chitosan (CS) with polyethylene glycol (PEG) of different molecular weights in the presence of silane crosslinker. The incorporated components remain undissolved in different swelling media as they are connected by siloxane linkage which was confirmed by Fourier transform infrared spectroscopy. The swelling in water was enhanced by the addition of higher molecular weight PEG. The swelling behaviour of the hydrogels against pH showed high swelling in acidic and basic pH, whereas, low swelling was examined at pH 6 and 7. This characteristic pH responsive behaviour at neutral pH made them suitable for injectable controlled drug delivery. The controlled release analysis of Cefixime (CFX) (model drug) loaded CS/PEG hydrogel exhibited that the entire drug was released in 30 min in simulated gastric fluid (SGF) while in simulated intestinal fluid (SIF), 85% of drug was released in controlled manner within 80 min. This inferred that the developed hydrogels can be an attractive biomaterial for injectable drug delivery with physiological pH and other biomedical applications.

  17. In vitro assessment of biopolymer-modified porous silicon microparticles for wound healing applications.

    Science.gov (United States)

    Mori, Michela; Almeida, Patrick V; Cola, Michela; Anselmi, Giulia; Mäkilä, Ermei; Correia, Alexandra; Salonen, Jarno; Hirvonen, Jouni; Caramella, Carla; Santos, Hélder A

    2014-11-01

    The wound healing stands as very complex and dynamic process, aiming the re-establishment of the damaged tissue's integrity and functionality. Thus, there is an emerging need for developing biopolymer-based composites capable of actively promoting cellular proliferation and reconstituting the extracellular matrix. The aims of the present work were to prepare and characterize biopolymer-functionalized porous silicon (PSi) microparticles, resulting in the development of drug delivery microsystems for future applications in wound healing. Thermally hydrocarbonized PSi (THCPSi) microparticles were coated with both chitosan and a mixture of chondroitin sulfate/hyaluronic acid, and subsequently loaded with two antibacterial model drugs, vancomycin and resveratrol. The biopolymer coating, drug loading degree and drug release behavior of the modified PSi microparticles were evaluated in vitro. The results showed that both the biopolymer coating and drug loading of the THCPSi microparticles were successfully achieved. In addition, a sustained release was observed for both the drugs tested. The viability and proliferation profiles of a fibroblast cell line exposed to the modified THCPSi microparticles and the subsequent reactive oxygen species (ROS) production were also evaluated. The cytotoxicity and proliferation results demonstrated less toxicity for the biopolymer-coated THCPSi microparticles at different concentrations and time points comparatively to the uncoated counterparts. The ROS production by the fibroblasts exposed to both uncoated and biopolymer-coated PSi microparticles showed that the modified PSi microparticles did not induce significant ROS production at the concentrations tested. Overall, the biopolymer-based PSi microparticles developed in this study are promising platforms for wound healing applications.

  18. Economic assessment of flash co-pyrolysis of short rotation coppice and biopolymer waste streams.

    Science.gov (United States)

    Kuppens, T; Cornelissen, T; Carleer, R; Yperman, J; Schreurs, S; Jans, M; Thewys, T

    2010-12-01

    The disposal problem associated with phytoextraction of farmland polluted with heavy metals by means of willow requires a biomass conversion technique which meets both ecological and economical needs. Combustion and gasification of willow require special and costly flue gas treatment to avoid re-emission of the metals in the atmosphere, whereas flash pyrolysis mainly results in the production of (almost) metal free bio-oil with a relatively high water content. Flash co-pyrolysis of biomass and waste of biopolymers synergistically improves the characteristics of the pyrolysis process: e.g. reduction of the water content of the bio-oil, more bio-oil and less char production and an increase of the HHV of the oil. This research paper investigates the economic consequences of the synergistic effects of flash co-pyrolysis of 1:1 w/w ratio blends of willow and different biopolymer waste streams via cost-benefit analysis and Monte Carlo simulations taking into account uncertainties. In all cases economic opportunities of flash co-pyrolysis of biomass with biopolymer waste are improved compared to flash pyrolysis of pure willow. Of all the biopolymers under investigation, polyhydroxybutyrate (PHB) is the most promising, followed by Eastar, Biopearls, potato starch, polylactic acid (PLA), corn starch and Solanyl in order of decreasing profits. Taking into account uncertainties, flash co-pyrolysis is expected to be cheaper than composting biopolymer waste streams, except for corn starch. If uncertainty increases, composting also becomes more interesting than flash co-pyrolysis for waste of Solanyl. If the investment expenditure is 15% higher in practice than estimated, the preference for flash co-pyrolysis compared to composting biopolymer waste becomes less clear. Only when the system of green current certificates is dismissed, composting clearly is a much cheaper processing technique for disposing of biopolymer waste.

  19. Color visualization of cyclic magnitudes

    Science.gov (United States)

    Restrepo, Alfredo; Estupiñán, Viviana

    2014-02-01

    We exploit the perceptual, circular ordering of the hues in a technique for the visualization of cyclic variables. The hue is thus meaningfully used for the indication of variables such as the azimuth and the units of the measurement of time. The cyclic (or circular) variables may be both of the continuous type or the discrete type; among the first there is azimuth and among the last you find the musical notes and the days of the week. A correspondence between the values of a cyclic variable and the chromatic hues, where the natural circular ordering of the variable is respected, is called a color code for the variable. We base such a choice of hues on an assignment of of the unique hues red, yellow, green and blue, or one of the 8 even permutations of this ordered list, to 4 cardinal values of the cyclic variable, suitably ordered; color codes based on only 3 cardinal points are also possible. Color codes, being intuitive, are easy to remember. A possible low accuracy when reading instruments that use this technique is compensated by fast, ludic and intuitive readings; also, the use of a referential frame makes readings precise. An achromatic version of the technique, that can be used by dichromatic people, is proposed.

  20. Cyclic Codes of Length 2

    Indian Academy of Sciences (India)

    Manju Pruthi

    2001-11-01

    In this paper explicit expressions of + 1 idempotents in the ring $R = F_q[X]/\\langle X^{2^m}-1\\rangle$ are given. Cyclic codes of length 2 over the finite field , of odd characteristic, are defined in terms of their generator polynomials. The exact minimum distance and the dimension of the codes are obtained.

  1. Dibromidodimethyldipyridineplatinum(IV

    Directory of Open Access Journals (Sweden)

    Mairéad E. Kelly

    2008-11-01

    Full Text Available In the title complex, [PtBr2(CH32(C5H5N2], the PtIV metal centre lies on a twofold rotation axis and adopts a slightly distorted octahedral coordination geometry. The structure displays weak intramolecular C—H...Br hydrogen-bonding interactions.

  2. Marketing produktu Karel IV.

    OpenAIRE

    Mikšů, Šárka

    2009-01-01

    Goal of the thesis Marketing of the product Karel IV. is to propose chanels of marketing communication and indicate possibilities of next product's development. Theoretical part is based on marketing plan and it's partition. In the practical part you can find market analysis and competing products analysis, product's evolution description and marketing research.

  3. PLATO IV Accountancy Index.

    Science.gov (United States)

    Pondy, Dorothy, Comp.

    The catalog was compiled to assist instructors in planning community college and university curricula using the 48 computer-assisted accountancy lessons available on PLATO IV (Programmed Logic for Automatic Teaching Operation) for first semester accounting courses. It contains information on lesson access, lists of acceptable abbreviations for…

  4. Selection of optimal conditions for anti-corrosive microbial biopolymer production by the Flavobacterium strain using response surface methodology (RSM

    Directory of Open Access Journals (Sweden)

    mojtaba khani

    2016-09-01

    Full Text Available Introduction: Various methods have been proposed to deal with corrosion. One of these methods is using of paints and coatings. In formulation of paints and coatings several anti-corrosion compounds are applied that slow down the corrosion process. In this respect, using microbial biopolymers can improve this problem in the industry with lower costs because of biopolymer production not required to factory and advanced industry. in this study, the effects of temperature, pH and agitation on the biopolymer production using response surface methodology (RSM were evaluated. Materials and methods: To produce biopolymer, the culture medium (300 ml were added in the 500 ml erlenmeyer flasks. Then, the bacterial preculture medium (6% V/V were inoculated in the flasks and incubated for 96hr in different conditions (agitation speed, tempreture and pH. Afterwards, the medium was centrifuged at 9000 rpm for 10 min and the supernatant was mixed with triple volume of chilled absolute ethanol and stored at 4°C for 24hr to precipitate. Results: Analysis of the results of design experiments indicate that the biopolymer production­ was strongly governed by the temperature, pH and agitation. The biopolymer production increased steadily up to pH 8 and decreased in the higher pH values. Also, for cell growth suitable temperature was 33°C and maximum concentration of the biopolymer production was agitation of 210 rpm. Finally, maximum concentration of the biopolymer production (14.3g/l was determined to be in pH of 8, temperature of 33°C and agitation of 210­rpm. Discussion and conclusion: Anti-corrosive biopolymer production by Flavobacterium sp. affected significantly by physical parameters. The results of the biopolymer production by investigating the conditions of temperature, pH and agitation after optimization, indicates the importance of this parameter for economic production of biopolymer.

  5. Powers of Convex-Cyclic Operators

    Directory of Open Access Journals (Sweden)

    Fernando León-Saavedra

    2014-01-01

    Full Text Available A bounded operator T on a Banach space X is convex cyclic if there exists a vector x such that the convex hull generated by the orbit Tnxn≥0 is dense in X. In this note we study some questions concerned with convex-cyclic operators. We provide an example of a convex-cyclic operator T such that the power Tn fails to be convex cyclic. Using this result we solve three questions posed by Rezaei (2013.

  6. CYCLIC CODES OVER FORMAL POWER SERIES RINGS

    Institute of Scientific and Technical Information of China (English)

    Dougherty Steven T.; Liu Hongwei

    2011-01-01

    In this article, cyclic codes and negacyclic codes over formal power series rings are studied. The structure of cyclic codes over this class of rings is given, and the relationship between these codes and cyclic codes over finite chain rings is obtained. Using an isomorphism between cyclic and negacyclic codes over formal power series rings, the structure of negacyclic codes over the formal power series rings is obtained.

  7. Interactions between Chitosan and Alginate Dialdehyde Biopolymers and Their Layer-by-Layer Assemblies.

    Science.gov (United States)

    Aston, Robyn; Wimalaratne, Medini; Brock, Aidan; Lawrie, Gwendolyn; Grøndahl, Lisbeth

    2015-06-01

    Biopolymers are researched extensively for their applications in biomaterials science and drug delivery including structures and complexes of more than one polymer. Chemical characterization of complexes formed between chitosan (CHI) and alginate dialdehyde (ADA) biopolymers established that while electrostatic interactions dominate (as determined from X-ray photoelectron spectroscopy (XPS)) covalent cross-linking between these biopolymers also contribute to their stability (evidenced from immersion in salt solution). It was furthermore found that imine bond formation could not be directly detected by any of the techniques XPS, FTIR, (1)H NMR, or fluorescence. The layer-by-layer assemblies of the biopolymers formed on silica colloids, glass slides, and alginate hydrogel beads were evaluated using XPS, as well as zeta potential measurements for the silica colloids and changes to hydration properties for the hydrogels. It was found that the degree of oxidation of ADA affected the LbL assemblies in terms of a greater degree of CHI penetration observed when using the more conformationally flexible biopolymer ADA (higher degree of oxidation).

  8. Novel biopolymer-coated hydroxyapatite foams for removing heavy-metals from polluted water

    Energy Technology Data Exchange (ETDEWEB)

    Vila, M.; Sanchez-Salcedo, S.; Cicuendez, M.; Izquierdo-Barba, I. [Inorganic and BioInorganic Chemistry Department, Pharmacy Faculty, Universidad Complutense de Madrid, Plaza de Ramon y Cajal s/n, 28040 Madrid (Spain); Biomedical Research Networking Center in Bioengineering, Biomaterials and Nanomedicine, CIBER-BBN (Spain); Vallet-Regi, Maria, E-mail: vallet@farm.ucm.es [Inorganic and BioInorganic Chemistry Department, Pharmacy Faculty, Universidad Complutense de Madrid, Plaza de Ramon y Cajal s/n, 28040 Madrid (Spain); Biomedical Research Networking Center in Bioengineering, Biomaterials and Nanomedicine, CIBER-BBN (Spain)

    2011-08-15

    Highlights: {yields} 3D-macroporous biopolymer-coated hydroxyapatite (HA) foams as potential devices for the treatment of heavy metal ions. {yields} HA stable foams coated with biopolymers. {yields} Feasible advance in development of new, easy to handle and low cost water purifying methods. - Abstract: 3D-macroporous biopolymer-coated hydroxyapatite (HA) foams have been developed as potential devices for the treatment of lead, cadmium and copper contamination of consumable waters. These foams have exhibited a fast and effective ion metal immobilization into the HA structure after an in vitro treatment mimicking a serious water contamination case. To improve HA foam stability at contaminated aqueous solutions pH, as well as its handling and shape integrity the 3D-macroporous foams have been coated with biopolymers polycaprolactone (PCL) and gelatine cross-linked with glutaraldehyde (G/Glu). Metal ion immobilization tests have shown higher and fast heavy metals captured as function of hydrophilicity rate of biopolymer used. After an in vitro treatment, foam morphology integrity is guaranteed and the uptake of heavy metal ions rises up to 405 {mu}mol/g in the case of Pb{sup 2+}, 378 {mu}mol/g of Cu{sup 2+} and 316 {mu}mol/g of Cd{sup 2+}. These novel materials promise a feasible advance in development of new, easy to handle and low cost water purifying methods.

  9. Spectral analysis methods for the robust measurement of the flexural rigidity of biopolymers.

    Science.gov (United States)

    Valdman, David; Atzberger, Paul J; Yu, Dezhi; Kuei, Steve; Valentine, Megan T

    2012-03-07

    The mechanical properties of biopolymers can be determined from a statistical analysis of the ensemble of shapes they exhibit when subjected to thermal forces. In practice, extracting information from fluorescence microscopy images can be challenging due to low signal/noise ratios and other artifacts. To address these issues, we develop a suite of tools for image processing and spectral data analysis that is based on a biopolymer contour representation expressed in a spectral basis of orthogonal polynomials. We determine biopolymer shape and stiffness using global fitting routines that optimize a utility function measuring the amount of fluorescence intensity overlapped by such contours. This approach allows for filtering of high-frequency noise and interpolation over sporadic gaps in fluorescence. We use benchmarking to demonstrate the validity of our methods, by analyzing an ensemble of simulated images generated using a simulated biopolymer with known stiffness and subjected to various types of image noise. We then use these methods to determine the persistence lengths of taxol-stabilized microtubules. We find that single microtubules are well described by the wormlike chain polymer model, and that ensembles of chemically identical microtubules show significant heterogeneity in bending stiffness, which cannot be attributed to sampling or fitting errors. We expect these approaches to be useful in the study of biopolymer mechanics and the effects of associated regulatory molecules.

  10. Spectral Analysis Methods for the Robust Measurement of the Flexural Rigidity of Biopolymers

    Science.gov (United States)

    Valdman, David; Atzberger, Paul J.; Yu, Dezhi; Kuei, Steve; Valentine, Megan T.

    2012-01-01

    The mechanical properties of biopolymers can be determined from a statistical analysis of the ensemble of shapes they exhibit when subjected to thermal forces. In practice, extracting information from fluorescence microscopy images can be challenging due to low signal/noise ratios and other artifacts. To address these issues, we develop a suite of tools for image processing and spectral data analysis that is based on a biopolymer contour representation expressed in a spectral basis of orthogonal polynomials. We determine biopolymer shape and stiffness using global fitting routines that optimize a utility function measuring the amount of fluorescence intensity overlapped by such contours. This approach allows for filtering of high-frequency noise and interpolation over sporadic gaps in fluorescence. We use benchmarking to demonstrate the validity of our methods, by analyzing an ensemble of simulated images generated using a simulated biopolymer with known stiffness and subjected to various types of image noise. We then use these methods to determine the persistence lengths of taxol-stabilized microtubules. We find that single microtubules are well described by the wormlike chain polymer model, and that ensembles of chemically identical microtubules show significant heterogeneity in bending stiffness, which cannot be attributed to sampling or fitting errors. We expect these approaches to be useful in the study of biopolymer mechanics and the effects of associated regulatory molecules. PMID:22404937

  11. Measurement of Cadmium Ion in the Presence of Metal-Binding Biopolymers in Aqueous Sample

    Science.gov (United States)

    Pu, Jian; Fukushi, Kensuke

    2013-01-01

    In aqueous environment, water-soluble polymers are effectively used to separate free metal ions from metal-polymer complexes. The feasibilities of four different analytical techniques, cadmium ion-selective electrode, dialysis sack, chelate disk cartridge, and ultrafiltration, in distinguishing biopolymer-bound and nonbound cadmium in aqueous samples were investigated. And two different biopolymers were used, including bovine serum albumin (BSA) and biopolymer solution extracted from cultivated activated sludge (ASBP). The ISE method requires relatively large amount of sample and contaminates sample during the pretreatment. After the long reaction time of dialysis, the equilibrium of cadmium in the dialysis sack would be shifted. Due to the sample nature, chelate disk cartridge could not filter within recommended time, which makes it unavailable for biopolymer use. Ultrafiltration method would not experience the difficulties mentioned above. Ultrafiltration method measuring both weakly and strongly bound cadmium was included in nominally biopolymer-cadmium complex. It had significant correlation with the Ion-selective electrode (ISE) method (R2 = 0.989 for BSA, 0.985 for ASBP). PMID:24194678

  12. Chemical Modeling of Acid-Base Properties of Soluble Biopolymers Derived from Municipal Waste Treatment Materials

    Science.gov (United States)

    Tabasso, Silvia; Berto, Silvia; Rosato, Roberta; Tafur Marinos, Janeth Alicia; Ginepro, Marco; Zelano, Vincenzo; Daniele, Pier Giuseppe; Montoneri, Enzo

    2015-01-01

    This work reports a study of the proton-binding capacity of biopolymers obtained from different materials supplied by a municipal biowaste treatment plant located in Northern Italy. One material was the anaerobic fermentation digestate of the urban wastes organic humid fraction. The others were the compost of home and public gardening residues and the compost of the mix of the above residues, digestate and sewage sludge. These materials were hydrolyzed under alkaline conditions to yield the biopolymers by saponification. The biopolymers were characterized by 13C NMR spectroscopy, elemental analysis and potentiometric titration. The titration data were elaborated to attain chemical models for interpretation of the proton-binding capacity of the biopolymers obtaining the acidic sites concentrations and their protonation constants. The results obtained with the models and by NMR spectroscopy were elaborated together in order to better characterize the nature of the macromolecules. The chemical nature of the biopolymers was found dependent upon the nature of the sourcing materials. PMID:25658795

  13. Measurement of Cadmium Ion in the Presence of Metal-Binding Biopolymers in Aqueous Sample

    Directory of Open Access Journals (Sweden)

    Jian Pu

    2013-01-01

    Full Text Available In aqueous environment, water-soluble polymers are effectively used to separate free metal ions from metal-polymer complexes. The feasibilities of four different analytical techniques, cadmium ion-selective electrode, dialysis sack, chelate disk cartridge, and ultrafiltration, in distinguishing biopolymer-bound and nonbound cadmium in aqueous samples were investigated. And two different biopolymers were used, including bovine serum albumin (BSA and biopolymer solution extracted from cultivated activated sludge (ASBP. The ISE method requires relatively large amount of sample and contaminates sample during the pretreatment. After the long reaction time of dialysis, the equilibrium of cadmium in the dialysis sack would be shifted. Due to the sample nature, chelate disk cartridge could not filter within recommended time, which makes it unavailable for biopolymer use. Ultrafiltration method would not experience the difficulties mentioned above. Ultrafiltration method measuring both weakly and strongly bound cadmium was included in nominally biopolymer-cadmium complex. It had significant correlation with the Ion-selective electrode (ISE method (R2=0.989 for BSA, 0.985 for ASBP.

  14. Chemical Modeling of Acid-Base Properties of Soluble Biopolymers Derived from Municipal Waste Treatment Materials

    Directory of Open Access Journals (Sweden)

    Silvia Tabasso

    2015-02-01

    Full Text Available This work reports a study of the proton-binding capacity of biopolymers obtained from different materials supplied by a municipal biowaste treatment plant located in Northern Italy. One material was the anaerobic fermentation digestate of the urban wastes organic humid fraction. The others were the compost of home and public gardening residues and the compost of the mix of the above residues, digestate and sewage sludge. These materials were hydrolyzed under alkaline conditions to yield the biopolymers by saponification. The biopolymers were characterized by 13C NMR spectroscopy, elemental analysis and potentiometric titration. The titration data were elaborated to attain chemical models for interpretation of the proton-binding capacity of the biopolymers obtaining the acidic sites concentrations and their protonation constants. The results obtained with the models and by NMR spectroscopy were elaborated together in order to better characterize the nature of the macromolecules. The chemical nature of the biopolymers was found dependent upon the nature of the sourcing materials.

  15. Encapsulation of lead from hazardous CRT glass wastes using biopolymer cross-linked concrete systems.

    Science.gov (United States)

    Kim, Daeik; Quinlan, Michael; Yen, Teh Fu

    2009-01-01

    Discarded computer monitors and television sets are identified as hazardous materials due to the high content of lead in their cathode ray tubes (CRTs). Over 98% of lead is found in CRT glass. More than 75% of obsolete electronics including TV and CRT monitors are in storage because appropriate e-waste management and remediation technologies are insufficient. Already an e-waste tsunami is starting to roll across the US and the whole world. Thus, a new technology was developed as an alternative to current disposal methods; this method uses a concrete composite crosslinked with minute amounts of biopolymers and a crosslinking agent. Commercially available microbial biopolymers of xanthan gum and guar gum were used to encapsulate CRT wastes, reducing Pb leachability as measured by standard USEPA methods. In this investigation, the synergistic effect of the crosslinking reaction was observed through blending two different biopolymers or adding a crosslinking agent in biopolymer solution. This CRT-biopolymer-concrete (CBC) composite showed higher compressive strength than the standard concrete and a considerable decrease in lead leachability.

  16. Influence of different treatment condition on biopolymer yield production for coagulation-flocculation process

    Science.gov (United States)

    Aisyah, I. S.; Murshed, M. F.; Norli, I.

    2016-06-01

    Two different agro wastes (banana pseudostem and rice straw) were utilized in order to extract biopolymer (pectin) known as coagulant aid in water and wastewater treatment. Factors such as pH, temperature and time were chosen due to the critical role in hot acid extraction process. The yield of biopolymer extraction from banana pseudostem was found to be higher at 28% meanwhile only 18% from rice straw was manage to produce from the dry weight 10 g, respectively. It was found that extraction temperature and extraction time were the most important factors influencing the biopolymer yield which increased with temperature and time or decreasing pH. Based on two level factorial design, the same condition of pH 1.5, temperature 90 oC and 4 hours extraction time can produce high amount of extracted biopolymer. Fourier Transform Infrared Spectroscopy (FTIR) was used to detect the existence of functional group which helps in the coagulation-flocculation process. Result indicates a similar functional group of biopolymer were detected for both difference agro wastes.

  17. 40 CFR 721.2120 - Cyclic amide.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Cyclic amide. 721.2120 Section 721... Cyclic amide. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as a cyclic amide (PMN P-92-131) is subject to reporting under this section for...

  18. The cyclic theory of Hopf algebroids

    NARCIS (Netherlands)

    Kowalzig, N.; Posthuma, H.

    2011-01-01

    We give a systematic description of the cyclic cohomology theory of Hopf alge\\-broids in terms of its associated category of modules. Then we introduce a dual cyclic homology theory by applying cyclic duality to the underlying cocyclic object. We derive general structure theorems for these theories

  19. The Cyclic Graph of a Finite Group

    Directory of Open Access Journals (Sweden)

    Xuan Long Ma

    2013-01-01

    and characterize certain finite groups whose cyclic graphs have some properties. Then, we present some properties of the cyclic graphs of the dihedral groups D2n and the generalized quaternion groups Q4n for some n. Finally, we present some parameters about the cyclic graphs of finite noncyclic groups of order up to 14.

  20. Monomers of cutin biopolymer: sorption and esterification on montmorillonite surfaces

    Science.gov (United States)

    Olshansky, Yaniv; Polubesova, Tamara; Chefetz, Benny

    2013-04-01

    One of the important precursors for soil organic matter is plant cuticle, a thin layer of predominantly lipids that cover all primary aerial surfaces of vascular plants. In most plant species cutin biopolymer is the major component of the cuticle (30-85% weight). Therefore cutin is the third most abundant plant biopolymer (after lignin and cellulose). Cutin is an insoluble, high molecular weight bio-polyester, which is constructed of inter-esterified cross linked hydroxy-fatty acids and hydroxyepoxy-fatty acids. The most common building blocks of the cutin are derivatives of palmitic acid, among them 9(10),16 dihydroxy palmitic acid (diHPA) is the main component. These fatty acids and their esters are commonly found in major organo-mineral soil fraction-humin. Hence, the complexes of cutin monomers with minerals may serve as model of humin. Both cutin and humin act as adsorption efficient domains for organic contaminants. However, only scarce information is available about the interactions of cutin with soil mineral surfaces, in particular with common soil mineral montmorillonite. The main hypothesize of the study is that adsorbed cutin monomers will be reconstituted on montmorillonite surface due to esterification and oligomerization, and that interactions of cutin monomers with montmorillonite will be affected by the type of exchangeable cation. Cutin monomers were obtained from the fruits of tomato (Lycopersicon esculentum). Adsorption of monomers was measured for crude Wyoming montmorillonites and montmorillonites saturated with Fe3+ and Ca2+. To understand the mechanism of monomer-clay interactions and to evaluate esterification on the clay surface, XRD and FTIR analyses of the montmorillonite-monomers complexes were performed. Our results demonstrated that the interactions of cutin monomers with montmorillonite are affected by the type of exchangeable cation. Isotherms of adsorption of cutin monomers on montmorillonites were fitted by a dual mode model of

  1. Vibrational spectroscopic studies of newly developed synthetic biopolymers.

    Science.gov (United States)

    Bista, Rajan K; Bruch, Reinhard F; Covington, Aaron M

    2010-05-01

    Vibrational spectroscopic techniques such as near-infrared (NIR), Fourier transform infrared (FTIR), and Raman spectroscopy are valuable diagnostic tools that can be used to elucidate comprehensive structural information of numerous biological samples. In this review article, we have highlighted the advantages of nanotechnology and biophotonics in conjunction with vibrational spectroscopic techniques in order to understand the various aspects of new kind of synthetic biopolymers termed as polyethylene glycol (PEG)ylated lipids. In contrast to conventional phospholipids, these novel lipids spontaneously form liposomes or nanovesicles upon hydration, without the supply of external activation energy. The amphiphiles considered in this study differ in their hydrophobic acyl chain length and contain different units of PEG hydrophilic headgroups. We have further explored the thermotropic phase behaviors and associated changes in the conformational order/disorder of such lipids by using variable-temperature FTIR and Raman spectroscopy. Phase transition temperature profiles and correlation between various spectral indicators have been identified by either monitoring the shifts in the vibrational peak positions or plotting vibrational peak intensity ratios in the C--H stretching region as a function of temperature. To supplement our observations of phase transformations, a thermodynamic approach known as differential scanning calorimetry (DSC) has been applied and revealed a good agreement with the infrared and Raman spectroscopic data. Finally, the investigation of thermal properties of lipids is extremely crucial for numerous purposes, thus the results obtained in this work may find application in a wide variety of studies including the development of PEGylated lipid based drug and substances delivery vehicles.

  2. Carbohydrate Biopolymers Enhance Antibody Responses to Mucosally Delivered Vaccine Antigens

    Science.gov (United States)

    Bacon, A.; Makin, J.; Sizer, P. J.; Jabbal-Gill, I.; Hinchcliffe, M.; Illum, L.; Chatfield, S.; Roberts, M.

    2000-01-01

    We have evaluated the ability of two carbohydrate biopolymers, chitosan and gellan, to enhance antibody responses to subunit influenza virus vaccines delivered to the respiratory tracts of mice. Groups of mice were vaccinated three times intranasally (i.n.) with 10 μg of purified influenza B/Panama virus surface antigens (PSAs), which consist of hemagglutinin (HA) and neuraminidase (NA), either alone or admixed with chitosan or gellan solutions. Separate groups were vaccinated subcutaneously (s.c.) with PSAs adsorbed to Alhydrogel or chitosan or gellan alone i.n. Serum antibody responses were determined by enzyme-linked immunosorbent assay (ELISA) for influenza virus-specific immunoglobulin G (IgG) and by HA inhibition (HAI) and NA inhibition (NAI) assays. The local respiratory immune response was measured by assaying for influenza virus-specific IgA antibody in nasal secretions and by enumerating nasal and pulmonary lymphocytes secreting IgA, IgG, and IgM anti-influenza virus-specific antibodies by enzyme-linked immunospotting (ELISPOT). When administered alone i.n., B/Panama PSA was poorly immunogenic. Parenteral immunization with B/Panama PSA with Alhydrogel elicited high titers of anti-B/Panama antibodies in serum but a very poor respiratory anti-B/Panama IgA response. In contrast, i.n. immunization with PSA plus chitosan stimulated very strong local and systemic anti-B/Panama responses. Gellan also enhanced the local and serum antibody responses to i.n. PSA but not to the same extent as chitosan. The ability of chitosan to augment the immunogenicity of influenza vaccines given i.n. was confirmed using PSA prepared from an influenza A virus (A/Texas H1N1). PMID:10992483

  3. Molecular field theory of reversible unfolding of biopolymers

    Science.gov (United States)

    Cerf, Roger

    1978-01-01

    A simple and general model of reversible conformational changes in biopolymers that lends itself to accounting for cooperativity without resort to a detailed description of the elementary steps is presented. It is suggested that the model permits the description of transitions in specific instances in which long-range effects are present and no simplifying feature allows for a more detailed theory in a straightforward way. The proposed phenomenological approach is based on the concept of molecular field which led to the first theory of ferromagnetism. Equations are given for the temperature dependence of optical properties and of the specific heat, from which the cooperativity parameter introduced by the theory can be obtained when the reaction enthalpy of the elementary step or the number of concerted elements is known. In the limit of a strong molecular field, heterogeneity in composition of a melting sequence does not affect the sharpness of the corresponding transition. Accounting for long-range effects allows for all-or-none transitions that are sharper than those derived from the two-state model. The feasibility of applying the molecular field concept is illustrated by comparing the results for poly(A)·2 poly(U) triple helices (which exhibit hysteresis) and those for poly(A)·poly(U) double helices (which separate reversibly). Tertiary structure is considered, among the sources of cooperativity that possibly may be represented in terms of a molecular field. On the basis of recent results for tRNA1val, it is suggested that the proposed approach may be applicable, in particular, to transfer ribonucleic acids. PMID:275844

  4. Novel eukaryotic enzymes modifying cell-surface biopolymers

    Directory of Open Access Journals (Sweden)

    Aravind L

    2010-01-01

    Full Text Available Abstract Background Eukaryotic extracellular matrices such as proteoglycans, sclerotinized structures, mucus, external tests, capsules, cell walls and waxes contain highly modified proteins, glycans and other composite biopolymers. Using comparative genomics and sequence profile analysis we identify several novel enzymes that could be potentially involved in the modification of cell-surface glycans or glycoproteins. Results Using sequence analysis and conservation we define the acyltransferase domain prototyped by the fungal Cas1p proteins, identify its active site residues and unify them to the superfamily of classical 10TM acyltransferases (e.g. oatA. We also identify a novel family of esterases (prototyped by the previously uncharacterized N-terminal domain of Cas1p that have a similar fold as the SGNH/GDSL esterases but differ from them in their conservation pattern. Conclusions We posit that the combined action of the acyltransferase and esterase domain plays an important role in controlling the acylation levels of glycans and thereby regulates their physico-chemical properties such as hygroscopicity, resistance to enzymatic hydrolysis and physical strength. We present evidence that the action of these novel enzymes on glycans might play an important role in host-pathogen interaction of plants, fungi and metazoans. We present evidence that in plants (e.g. PMR5 and ESK1 the regulation of carbohydrate acylation by these acylesterases might also play an important role in regulation of transpiration and stress resistance. We also identify a subfamily of these esterases in metazoans (e.g. C7orf58, which are fused to an ATP-grasp amino acid ligase domain that is predicted to catalyze, in certain animals, modification of cell surface polymers by amino acid or peptides. Reviewers This article was reviewed by Gaspar Jekely and Frank Eisenhaber

  5. pH induced contrast in viscoelasticity imaging of biopolymers

    Science.gov (United States)

    Yapp, R D; Insana, M F

    2009-01-01

    Understanding contrast mechanisms and identifying discriminating features is at the heart of diagnostic imaging development. This report focuses on how pH influences the viscoelastic properties of biopolymers to better understand the effects of extracellular pH on breast tumour elasticity imaging. Extracellular pH is known to decrease as much as 1 pH unit in breast tumours, thus creating a dangerous environment that increases cellular mutatation rates and therapeutic resistance. We used a gelatin hydrogel phantom to isolate the effects of pH on a polymer network with similarities to the extracellular matrix in breast stroma. Using compressive unconfined creep and stress relaxation measurements, we systematically measured the viscoelastic features sensitive to pH by way of time domain models and complex modulus analysis. These results are used to determine the sensitivity of quasi-static ultrasonic elasticity imaging to pH. We found a strong elastic response of the polymer network to pH, such that the matrix stiffness decreases as pH was reduced, however the viscous response of the medium to pH was negligible. While physiological features of breast stroma such as proteoglycans and vascular networks are not included in our hydrogel model, observations in this study provide insight into viscoelastic features specific to pH changes in the collagenous stromal network. These observations suggest that the large contrast common in breast tumours with desmoplasia may be reduced under acidic conditions, and that viscoelastic features are unlikely to improve discriminability. PMID:19174599

  6. Novel eukaryotic enzymes modifying cell-surface biopolymers

    Science.gov (United States)

    2010-01-01

    Background Eukaryotic extracellular matrices such as proteoglycans, sclerotinized structures, mucus, external tests, capsules, cell walls and waxes contain highly modified proteins, glycans and other composite biopolymers. Using comparative genomics and sequence profile analysis we identify several novel enzymes that could be potentially involved in the modification of cell-surface glycans or glycoproteins. Results Using sequence analysis and conservation we define the acyltransferase domain prototyped by the fungal Cas1p proteins, identify its active site residues and unify them to the superfamily of classical 10TM acyltransferases (e.g. oatA). We also identify a novel family of esterases (prototyped by the previously uncharacterized N-terminal domain of Cas1p) that have a similar fold as the SGNH/GDSL esterases but differ from them in their conservation pattern. Conclusions We posit that the combined action of the acyltransferase and esterase domain plays an important role in controlling the acylation levels of glycans and thereby regulates their physico-chemical properties such as hygroscopicity, resistance to enzymatic hydrolysis and physical strength. We present evidence that the action of these novel enzymes on glycans might play an important role in host-pathogen interaction of plants, fungi and metazoans. We present evidence that in plants (e.g. PMR5 and ESK1) the regulation of carbohydrate acylation by these acylesterases might also play an important role in regulation of transpiration and stress resistance. We also identify a subfamily of these esterases in metazoans (e.g. C7orf58), which are fused to an ATP-grasp amino acid ligase domain that is predicted to catalyze, in certain animals, modification of cell surface polymers by amino acid or peptides. Reviewers This article was reviewed by Gaspar Jekely and Frank Eisenhaber PMID:20056006

  7. Refolding dynamics of stretched biopolymers upon force quench

    Science.gov (United States)

    Hyeon, Changbong; Morrison, Greg; Pincus, David L.; Thirumalai, D.

    2009-01-01

    Single-molecule force spectroscopy methods can be used to generate folding trajectories of biopolymers from arbitrary regions of the folding landscape. We illustrate the complexity of the folding kinetics and generic aspects of the collapse of RNA and proteins upon force quench by using simulations of an RNA hairpin and theory based on the de Gennes model for homopolymer collapse. The folding time, τF, depends asymmetrically on δfS = f S − f m and δf Q = f m − f Q where f S (f Q) is the stretch (quench) force and f m is the transition midforce of the RNA hairpin. In accord with experiments, the relaxation kinetics of the molecular extension, R(t), occurs in three stages: A rapid initial decrease in the extension is followed by a plateau and finally, an abrupt reduction in R(t) occurs as the native state is approached. The duration of the plateau increases as λ = τ Q/τ F decreases (where τ Q is the time in which the force is reduced from f S to f Q). Variations in the mechanisms of force-quench relaxation as λ is altered are reflected in the experimentally measurable time-dependent entropy, which is computed directly from the folding trajectories. An analytical solution of the de Gennes model under tension reproduces the multistage stage kinetics in R(t). The prediction that the initial stages of collapse should also be a generic feature of polymers is validated by simulation of the kinetics of toroid (globule) formation in semiflexible (flexible) homopolymers in poor solvents upon quenching the force from a fully stretched state. Our findings give a unified explanation for multiple disparate experimental observations of protein folding. PMID:19915145

  8. Mechanics, thermodynamics, and kinetics of ligand binding to biopolymers.

    Science.gov (United States)

    Jarillo, Javier; Morín, José A; Beltrán-Heredia, Elena; Villaluenga, Juan P G; Ibarra, Borja; Cao, Francisco J

    2017-01-01

    Ligands binding to polymers regulate polymer functions by changing their physical and chemical properties. This ligand regulation plays a key role in many biological processes. We propose here a model to explain the mechanical, thermodynamic, and kinetic properties of the process of binding of small ligands to long biopolymers. These properties can now be measured at the single molecule level using force spectroscopy techniques. Our model performs an effective decomposition of the ligand-polymer system on its covered and uncovered regions, showing that the elastic properties of the ligand-polymer depend explicitly on the ligand coverage of the polymer (i.e., the fraction of the polymer covered by the ligand). The equilibrium coverage that minimizes the free energy of the ligand-polymer system is computed as a function of the applied force. We show how ligands tune the mechanical properties of a polymer, in particular its length and stiffness, in a force dependent manner. In addition, it is shown how ligand binding can be regulated applying mechanical tension on the polymer. Moreover, the binding kinetics study shows that, in the case where the ligand binds and organizes the polymer in different modes, the binding process can present transient shortening or lengthening of the polymer, caused by changes in the relative coverage by the different ligand modes. Our model will be useful to understand ligand-binding regulation of biological processes, such as the metabolism of nucleic acid. In particular, this model allows estimating the coverage fraction and the ligand mode characteristics from the force extension curves of a ligand-polymer system.

  9. pH-induced contrast in viscoelasticity imaging of biopolymers

    Energy Technology Data Exchange (ETDEWEB)

    Yapp, R D; Insana, M F [Department of Bioengineering, Beckman Institute for Advanced Science and Technology, University of Illinois, Urbana-Champaign, IL 61801 (United States)], E-mail: ryapp2@illinois.edu

    2009-03-07

    Understanding contrast mechanisms and identifying discriminating features is at the heart of diagnostic imaging development. This paper focuses on how pH influences the viscoelastic properties of biopolymers to better understand the effects of extracellular pH on breast tumour elasticity imaging. Extracellular pH is known to decrease as much as 1 pH unit in breast tumours, thus creating a dangerous environment that increases cellular mutatation rates and therapeutic resistance. We used a gelatin hydrogel phantom to isolate the effects of pH on a polymer network with similarities to the extracellular matrix in breast stroma. Using compressive unconfined creep and stress relaxation measurements, we systematically measured the viscoelastic features sensitive to pH by way of time-domain models and complex modulus analysis. These results are used to determine the sensitivity of quasi-static ultrasonic elasticity imaging to pH. We found a strong elastic response of the polymer network to pH, such that the matrix stiffness decreases as pH was reduced; however, the viscous response of the medium to pH was negligible. While physiological features of breast stroma such as proteoglycans and vascular networks are not included in our hydrogel model, observations in this study provide insight into viscoelastic features specific to pH changes in the collagenous stromal network. These observations suggest that the large contrast common in breast tumours with desmoplasia may be reduced under acidic conditions, and that viscoelastic features are unlikely to improve discriminability.

  10. pH-induced contrast in viscoelasticity imaging of biopolymers

    Science.gov (United States)

    Yapp, R. D.; Insana, M. F.

    2009-03-01

    Understanding contrast mechanisms and identifying discriminating features is at the heart of diagnostic imaging development. This paper focuses on how pH influences the viscoelastic properties of biopolymers to better understand the effects of extracellular pH on breast tumour elasticity imaging. Extracellular pH is known to decrease as much as 1 pH unit in breast tumours, thus creating a dangerous environment that increases cellular mutatation rates and therapeutic resistance. We used a gelatin hydrogel phantom to isolate the effects of pH on a polymer network with similarities to the extracellular matrix in breast stroma. Using compressive unconfined creep and stress relaxation measurements, we systematically measured the viscoelastic features sensitive to pH by way of time-domain models and complex modulus analysis. These results are used to determine the sensitivity of quasi-static ultrasonic elasticity imaging to pH. We found a strong elastic response of the polymer network to pH, such that the matrix stiffness decreases as pH was reduced; however, the viscous response of the medium to pH was negligible. While physiological features of breast stroma such as proteoglycans and vascular networks are not included in our hydrogel model, observations in this study provide insight into viscoelastic features specific to pH changes in the collagenous stromal network. These observations suggest that the large contrast common in breast tumours with desmoplasia may be reduced under acidic conditions, and that viscoelastic features are unlikely to improve discriminability.

  11. Enhanced Design Alternative IV

    Energy Technology Data Exchange (ETDEWEB)

    N. E. Kramer

    1999-05-18

    This report evaluates Enhanced Design Alternative (EDA) IV as part of the second phase of the License Application Design Selection (LADS) effort. The EDA IV concept was compared to the VA reference design using criteria from the ''Design Input Request for LADS Phase II EDA Evaluations'' (CRWMS M&O 1999b) and (CRWMS M&O 1999f). Briefly, the EDA IV concept arranges the waste packages close together in an emplacement configuration known as ''line load''. Continuous pre-closure ventilation keeps the waste packages from exceeding the 350 C cladding and 200 C (4.3.13) drift wall temperature limits. This EDA concept keeps relatively high, uniform emplacement drift temperatures (post-closure) to drive water away from the repository and thus dry out the pillars between emplacement drifts. The waste package is shielded to permit human access to emplacement drifts and includes an integral filler inside the package to reduce the amount of water that can contact the waste form. Closure of the repository is desired 50 years after first waste is emplaced. Both backfill and a drip shields will be emplaced at closure to improve post-closure performance.

  12. Human elastin-based recombinant biopolymers improve mesenchymal stem cell differentiation.

    Science.gov (United States)

    Çelebi, Betül; Cloutier, Maxime; Rabelo, Rodrigo B; Balloni, Rodrigo; Mantovani, Diego; Bandiera, Antonella

    2012-11-01

    Elastin-based polypeptides are a class of smart biopolymers representing an important model in the design of biomaterials. The combination of biomimetic materials with cells that have great plasticity provides a promising strategy for the realization of highly engineered cell-based constructs for regenerative medicine and tissue repair applications. Two recombinant biopolymers inspired by human elastin are assessed as coating agents to prepare biomimetic surfaces for cell culture. These substrates are assayed for hBM MSC culture. The coated surfaces are also characterized with AFM to evaluate the topographical features of the deposited biopolymers. The results suggest that the elastin-derived biomimetic surfaces play a stimulatory role on osteogenic differentiation of MSCs.

  13. Enzyme and metabolic engineering for the production of novel biopolymers: crossover of biological and chemical processes.

    Science.gov (United States)

    Matsumoto, Ken'ichiro; Taguchi, Seiichi

    2013-12-01

    The development of synthetic biology has transformed microbes into useful factories for producing valuable polymers and/or their precursors from renewable biomass. Recent progress at the interface of chemistry and biology has enabled the production of a variety of new biopolymers with properties that substantially differ from their petroleum-derived counterparts. This review touches on recent trials and achievements in the field of biopolymer synthesis, including chemo-enzymatically synthesized aliphatic polyesters, wholly biosynthesized lactate-based polyesters, polyhydroxyalkanoates and other unusual bacterially synthesized polyesters. The expanding diversities in structure and the material properties of biopolymers are key for exploring practical applications. The enzyme and metabolic engineering approaches toward this goal are discussed by shedding light on the successful case studies.

  14. Biopolymer nanocomposites: processing, properties, and applications (wiley series on polymer engineering and technology)

    CERN Document Server

    2013-01-01

    Interest in biopolymer nanocomposites is soaring. Not only are they green and sustainable materials, they can also be used to develop a broad range of useful products with special properties, from therapeutics to coatings to packaging materials. With contributions from an international team of leading nanoscientists and materials researchers, this book draws together and reviews the most recent developments and techniques in biopolymer nano-composites. It describes the preparation, processing, properties, and applications of bio- polymer nanocomposites developed from chitin, starch, and cellulose, three renewable resources.Biopolymer Nanocomposites features a logical organization and approach that make it easy for readers to take full advantage of the latest science and technology in designing these materials and developing new products and applications. It begins with a chapter reviewing our current understanding of b...

  15. The cross-linking influence of electromagnetic radiation on water-soluble polyacrylan compositions with biopolymers

    Directory of Open Access Journals (Sweden)

    B. Grabowska

    2009-01-01

    Full Text Available The results of examinations of the cross-linking influence of electromagnetic radiation - in a microwave range – on polyacrylancompositions with biopolymers, are presented in the hereby paper. The cross-linking process of the tested compositions was determined on the basis of the FT-IR spectroscopic methods. It was shown that microwave operations can lead to the formation of new cross-linkedstructures with strong covalent bonds. The adsorption process and formation of active centres in polymer molecules as well as in highsilica sand were found due to microwave radiations. In this process hydroxyl groups (-OH - present in a polymer - and silane groups (Si- O-H - present in a matrix - are mainly taking part. Spectroscopic and strength tests performed for the system: biopolymer binding agent – matrix indicate that the microwave radiation can be applied for hardening moulding sands with biopolymer binders.

  16. Nanostructured gel scaffolds for osteogenesis through biological assembly of biopolymers via specific nucleobase pairing.

    Science.gov (United States)

    Fan, Ming; Yan, Jingxuan; Tan, Huaping; Ben, Dandan; He, Qiuling; Huang, Zhongwei; Hu, Xiaohong

    2014-11-01

    Biopolymer-based gel scaffolds have great potential in the field of tissue regenerative medicine. In this work, a nanostructured biopolymer gel scaffold via specific pairing of functionalized nucleobases was developed for specifically targeted drug delivery and in vitro osteogenesis. The biopolymer gel system was established by the Watson-Crick base pairing between thymine and adenine via the hydrogen bonding. As gel scaffold precursors, opposite charged polysaccharide derivatives, e.g. quaternized cellulose and heparin, could be additionally crosslinked by extra electrostatic interactions. The potential application of this gel scaffold in bone tissue engineering was confirmed by encapsulation behavior of osteoblasts. In combination with cell growth factor, e.g. bone morphogenetic protein, the nanostructured gel scaffold exhibited beneficial effects on osteoblast activity and differentiation, which suggested a promising future for local treatment of pathologies involving bone loss.

  17. CdTe Quantum Dots Embedded in Multidentate Biopolymer Based on Salep: Characterization and Optical Properties

    Directory of Open Access Journals (Sweden)

    Ghasem Rezanejade Bardajee

    2013-01-01

    Full Text Available This paper describes a novel method for surface modification of water soluble CdTe quantum dots (QDs by using poly(acrylic acid grafted onto salep (salep-g-PAA as a biopolymer. As-prepared CdTe-salep-g-PAA QDs were characterized by Fourier transform infrared (FT-IR spectrum, thermogravimetric (TG analysis, and transmission electron microscopy (TEM. The absorption and fluorescence emission spectra were measured to investigate the effect of salep-g-PAA biopolymer on the optical properties of CdTe QDs. The results showed that the optical properties of CdTe QDs were significantly enhanced by using salep-g-PAA-based biopolymer.

  18. Self-(Un)rolling Biopolymer Microstructures: Rings, Tubules, and Helical Tubules from the Same Material.

    Science.gov (United States)

    Ye, Chunhong; Nikolov, Svetoslav V; Calabrese, Rossella; Dindar, Amir; Alexeev, Alexander; Kippelen, Bernard; Kaplan, David L; Tsukruk, Vladimir V

    2015-07-13

    We have demonstrated the facile formation of reversible and fast self-rolling biopolymer microstructures from sandwiched active-passive, silk-on-silk materials. Both experimental and modeling results confirmed that the shape of individual sheets effectively controls biaxial stresses within these sheets, which can self-roll into distinct 3D structures including microscopic rings, tubules, and helical tubules. This is a unique example of tailoring self-rolled 3D geometries through shape design without changing the inner morphology of active bimorph biomaterials. In contrast to traditional organic-soluble synthetic materials, we utilized a biocompatible and biodegradable biopolymer that underwent a facile aqueous layer-by-layer (LbL) assembly process for the fabrication of 2D films. The resulting films can undergo reversible pH-triggered rolling/unrolling, with a variety of 3D structures forming from biopolymer structures that have identical morphology and composition.

  19. Electrospinning of collagen/biopolymers for regenerative medicine and cardiovascular tissue engineering.

    Science.gov (United States)

    Sell, Scott A; McClure, Michael J; Garg, Koyal; Wolfe, Patricia S; Bowlin, Gary L

    2009-10-05

    The process of electrospinning has seen a resurgence of interest in the last few decades which has led to a rapid increase in the amount of research devoted to its use in tissue engineering applications. Of this research, the area of cardiovascular tissue engineering makes up a large percentage, with substantial resources going towards the creation of bioresorbable vascular grafts composed of electrospun nanofibers of collagen and other biopolymers. These bioresorbable grafts have compositions that allow for the in situ remodeling of the structure, with the eventual replacement of the graft with completely autologous tissue. This review will highlight some of the work done in the field of electrospinning for cardiovascular applications, with an emphasis on the use of biopolymers such as collagens, elastin, gelatin, fibrinogen, and silk fibroin, as well as biopolymers used in combination with resorbable synthetic polymers.

  20. Cyclical Fluctuations in Workplace Accidents

    OpenAIRE

    Boone, J.; J. C. VAN OURS

    2002-01-01

    This Paper presents a theory and an empirical investigation on cyclical fluctuations in workplace accidents. The theory is based on the idea that reporting an accident dents the reputation of a worker and raises the probability that he is fired. Therefore a country with a high or an increasing unemployment rate has a low (reported) workplace accident rate. The empirical investigation concerns workplace accidents in OECD countries. The analysis confirms that workplace accident rates are invers...

  1. Supramolecular self-assembly of biopolymers with carbon nanotubes for biomimetic and bio-inspired sensing and actuation.

    Science.gov (United States)

    Lu, Luhua; Chen, Wei

    2011-06-01

    Biopolymers are important natural multifunctional macromolecules for biomimetic and bio-inspired advanced functional material design. They are not only simple dispersants for carbon nanotube stabilization as they have been found to have specific interactions with carbon nanotubes. Their molecular activity, orientation and crystallization are influenced by the CNTs, which endow their composites with a variety of novel sensing and actuation performances. This review focuses on the progress in supramolecular self-assembly of biopolymers with carbon nanotubes, and their advances in sensing and actuation. To promote the development of advanced biopolymer/CNT functional materials, new electromechanical characteristics of biopolymer/CNT composites are discussed in detail based on the relationship between the microscopic biopolymer structures and the macroscopic composite properties.

  2. Campylobacter fetus subspecies contain conserved type IV secretion systems on multiple genomic islands and plasmids

    NARCIS (Netherlands)

    Graaf-Van Bloois, Van Der Linda; Miller, William G.; Yee, Emma; Wagenaar, Jaap A.

    2016-01-01

    The features contributing to differences in pathogenicity of the Campylobacter fetus subspecies are unknown. Putative factors involved in pathogenesis are located in genomic islands that encode a type IV secretion system (T4SS) and fic domain (filamentation induced by cyclic AMP) proteins, which

  3. Cyclic modular beta-sheets.

    Science.gov (United States)

    Woods, R Jeremy; Brower, Justin O; Castellanos, Elena; Hashemzadeh, Mehrnoosh; Khakshoor, Omid; Russu, Wade A; Nowick, James S

    2007-03-07

    The development of peptide beta-hairpins is problematic, because folding depends on the amino acid sequence and changes to the sequence can significantly decrease folding. Robust beta-hairpins that can tolerate such changes are attractive tools for studying interactions involving protein beta-sheets and developing inhibitors of these interactions. This paper introduces a new class of peptide models of protein beta-sheets that addresses the problem of separating folding from the sequence. These model beta-sheets are macrocyclic peptides that fold in water to present a pentapeptide beta-strand along one edge; the other edge contains the tripeptide beta-strand mimic Hao [JACS 2000, 122, 7654] and two additional amino acids. The pentapeptide and Hao-containing peptide strands are connected by two delta-linked ornithine (deltaOrn) turns [JACS 2003, 125, 876]. Each deltaOrn turn contains a free alpha-amino group that permits the linking of individual modules to form divalent beta-sheets. These "cyclic modular beta-sheets" are synthesized by standard solid-phase peptide synthesis of a linear precursor followed by solution-phase cyclization. Eight cyclic modular beta-sheets 1a-1h containing sequences based on beta-amyloid and macrophage inflammatory protein 2 were synthesized and characterized by 1H NMR. Linked cyclic modular beta-sheet 2, which contains two modules of 1b, was also synthesized and characterized. 1H NMR studies show downfield alpha-proton chemical shifts, deltaOrn delta-proton magnetic anisotropy, and NOE cross-peaks that establish all compounds but 1c and 1g to be moderately or well folded into a conformation that resembles a beta-sheet. Pulsed-field gradient NMR diffusion experiments show little or no self-association at low (

  4. CdTe Quantum Dots Embedded in Multidentate Biopolymer Based on Salep: Characterization and Optical Properties

    OpenAIRE

    Ghasem Rezanejade Bardajee; Zari Hooshyar

    2013-01-01

    This paper describes a novel method for surface modification of water soluble CdTe quantum dots (QDs) by using poly(acrylic acid) grafted onto salep (salep-g-PAA) as a biopolymer. As-prepared CdTe-salep-g-PAA QDs were characterized by Fourier transform infrared (FT-IR) spectrum, thermogravimetric (TG) analysis, and transmission electron microscopy (TEM). The absorption and fluorescence emission spectra were measured to investigate the effect of salep-g-PAA biopolymer on the optical propertie...

  5. Parallelized system for biopolymer degradation studies through automated microresonator measurement in liquid flow

    DEFF Research Database (Denmark)

    Casci Ceccacci, Andrea; Morelli, Lidia; Bosco, Filippo

    2015-01-01

    In this work we present a novel automated system which allows the study of enzymatic degradation of biopolymer films coated on micromechanical resonators. The system combines an optical readout based on Blu-Ray technology with a software-controlled scanning mechanism. Integrated with a microfluidic...... setup unit, the system allows high-throughput measurements of resonance frequency over microresonator arrays under controlled flow conditions. We here demonstrate the acquisition of statistical data on biopolymer films degradation under enzymatic reaction over a large sample of micromechanical...

  6. Translocation of Biopolymer Chain Through a Nanopore: Coil-Helix Transition

    Institute of Scientific and Technical Information of China (English)

    GU Fang; WANG Hai-Jun; HONG Xiao-Zhong; BA Xin-Wu

    2008-01-01

    @@ The translocation dynamics of a single biopolymer chain through a nanopore in a membrane is investigated by taking the coil-helix transition into account. Based on the changing of the free energy due to the coil-helix transition, the mean first passage time τ is obtained, and then the corresponding numerical simulations are presented under different conditions. It is shown that the coil helix transition can significantly shorten the translocation time of the biopolymer chain. In addition, we also discuss the scaling behaviour for τ with the chain length N and some related problems.

  7. Blu-Ray-based micromechanical characterization platform for biopolymer degradation assessment

    DEFF Research Database (Denmark)

    Casci Ceccacci, Andrea; Chen, Ching-Hsiu; Hwu, En-Te

    2017-01-01

    Degradable biopolymers are used as carrier materials in drug delivery devices. A complete understanding of their degradation behaviour is thus crucial in the design of new delivery systems. Here we combine a reliable method, based on spray coated micromechanical resonators and a disposable...... microfluidic chip, to characterize biopolymer degradation under the action of enzymes in controlled flow condition. The sensing platform is based on the mechanics and optics from a Blu-Ray player, which automatically localize individual sensors within the array, and sequentially measure and record...

  8. Genotoxicity of clays with potential use in biopolymers for food packaging

    DEFF Research Database (Denmark)

    Sharma, Anoop Kumar; Mortensen, Alicja; Hadrup, Niels

    Genotoxicity of clays with potential use in biopolymers for food packaging Plastics produced from biopolymers are of commercial interest as they are manufactured from renewable resources such as agricultural crop wastes and have the potential to meet environmental and health requirements. Biopoly......®30B and Cloisite®Na+ by oral gavage and the comet assay will be performed on cells from different organs including the liver, colon and kidney. A fully automated comet assay scoring system (Imstar) will be used to evaluate the genotoxic potential....

  9. Spider Silk: From Protein-Rich Gland Fluids to Diverse Biopolymer Fibers

    Science.gov (United States)

    2016-01-06

    AFRL-AFOSR-VA-TR-2016-0036 Spider Silk : From Protein-rich Gland Fluids to Diverse Biopolymer Fibers Gregory Holland ARIZONA STATE UNIVERSITY 660 S...3.  DATES COVERED (From - To)      01-12-2013 to 30-11-2015 4.  TITLE AND SUBTITLE Spider Silk : From Protein-rich Gland Fluids to Diverse Biopolymer...research is to elucidate the interactions, mechanisms and biochemistry of the spider silk producing process at the molecular level. Our primary focus is to

  10. Extraction of alginate biopolymer present in marine alga sargassum filipendula and bioadsorption of metallic ions

    OpenAIRE

    Sirlei Jaiana Kleinübing; Frederico Gai; Caroline Bertagnolli; Meuris Gurgel Carlos da Silva

    2013-01-01

    This paper studies the bioadsorption of Pb2+, Cu2+, Cd2+ and Zn2+ ions by marine alga Sargassum filipendula and by the alginate biopolymer extracted from this alga. The objective is to evaluate the importance of this biopolymer in removing different metallic ions by the marine alga S. filipendula. In the equilibrium study, the same affinity order was observed for both bioadsorbents: Pb2+ > Cu2+ > Zn2+ > Cd2+. For Pb2+ and Cu2+ ions when the alginate is isolated and acting as bioadsorbents, ad...

  11. Biopolymer chitosan: Properties, interactions and its use in the treatment of textiles

    Directory of Open Access Journals (Sweden)

    Jocić Dragan

    2004-01-01

    Full Text Available The biopolymer chitosan is obtained by the deacetylation of chitin, the second most abundant polysaccharide in nature, after cellulose. It is becoming an increasingly important biopolymer because it offers unique physico-chemical and biological properties. Due to its solubility, chitosan allows processing from aqueous solutions. This review provides information on important chitosan properties, as well as on some interactions that are of special interest for chitosan application. It summarizes some of the most important developments in the use of chitosan in the treatment of textile materials. Special emphasis is given to improved dyeing properties of the textile material treated with chitosan.

  12. Sectoral Shifts and Cyclical Fluctuations Sectoral Shifts and Cyclical Fluctuations

    Directory of Open Access Journals (Sweden)

    Richard Rogerson

    1991-03-01

    Full Text Available Sectoral Shifts and Cyclical Fluctuations This paper studies a two sector real business cycle model in which the sectors experience different trend rates of growth and labor mobility is costly. Predictions are derived concerning the correlation between sectoral reallocation of workers and the cycle. This correlation may be positive or negative depending upon whether the growing sector displays larger or smaller fluctuations than the shrinking sector. The post- World War II period has witnessed two major patterns of sectoral change in industrialized countries: movement out of agriculture and movement out of the industrial sector. The model's basic prediction is shown to be consistent with the observed pattern of reallocation.

  13. Removal of glyphosate herbicide from water using biopolymer membranes.

    Science.gov (United States)

    Carneiro, Rafael T A; Taketa, Thiago B; Gomes Neto, Reginaldo J; Oliveira, Jhones L; Campos, Estefânia V R; de Moraes, Mariana A; da Silva, Camila M G; Beppu, Marisa M; Fraceto, Leonardo F

    2015-03-15

    treat a water sample contaminated with glyphosate. Biopolymer membranes therefore potentially offer a versatile method to eliminate agricultural chemicals from water supplies.

  14. Ring-opening polymerization of cyclic esters by cyclodextrins.

    Science.gov (United States)

    Harada, Akira; Osaki, Motofumi; Takashima, Yoshinori; Yamaguchi, Hiroyasu

    2008-09-01

    Synthetic polymers, typically prepared by addition polymerization or stepwise polymerization, are used constantly in our daily lives. In recent years, polymer scientists have focused on more environmentally friendly synthetic methods such as mild reaction conditions and biodegradable condensation polymers, including polyesters and polyamides. However, challenges remain in finding greener methods for the synthesis of polymers. Although reactions carried out in water are more environmentally friendly than those in organic solvents, aqueous media can lead to the hydrolysis of condensation polymers. Furthermore, bulk polymerizations are difficult to control. In biological systems, enzymes synthesize most polymers (proteins, DNAs, RNAs, and polysaccharides) in aqueous environments or in condensed phases (membranes). Most enzymes, such as DNA polymerases, RNA polymerases, and ribosomes, form doughnutlike shapes, which encircle the growing polymer chain. As biopolymers form, the active sites and the substrate-combining sites are located at the end of the growing polymer chain and carefully control the polymerization. Therefore, a synthetic catalyst that could insert the monomers between the active site and binding site would create an ideal biomimetic polymerization system. In this Account, we describe cyclodextrins (CDs) as catalysts that can polymerize cyclic esters (lactones and lactides). CDs can initiate polymerizations of cyclic esters in bulk without solvents (even water) to give products in high yields. During our studies on the polymerization of lactones by CDs in bulk, we found that CDs function not only as initiators (catalysts) but also as supporting architectures similar to chaperone proteins. CDs encircle a linear polymer chain so that the chain assumes the proper conformation and avoids coagulation. The CDs can mimic the strategy that living systems use to prepare polymers. Thus, we can obtain polyesters tethered to CDs without employing additional solvents

  15. The cyclical component factor model

    DEFF Research Database (Denmark)

    Dahl, Christian Møller; Hansen, Henrik; Smidt, John

    Forecasting using factor models based on large data sets have received ample attention due to the models' ability to increase forecast accuracy with respect to a range of key macroeconomic variables in the US and the UK. However, forecasts based on such factor models do not uniformly outperform...... the simple autoregressive model when using data from other countries. In this paper we propose to estimate the factors based on the pure cyclical components of the series entering the large data set. Monte Carlo evidence and an empirical illustration using Danish data shows that this procedure can indeed...

  16. Cyclic voltammetry of supported BLMs

    Science.gov (United States)

    Murgasova, Renata; Sabo, Jan; Ottova, Angelica L.; Tien, H. T.

    1996-06-01

    The transfer of an electron across a bilayer lipid membrane (BLM) is one of the BLMs most exciting processes. A number of well known electron mediators have been investigated using the method of cyclic voltammetry on a Teflon coated platinum wire, the tip of which has been modified by a self-assembled bilayer lipid membrane (s-BLM). The electrical capacitance of the s-BLM system was measured as a function of frequency. The results are discussed in terms of electron transfer and redox reactions.

  17. Phase Diagram and Effective Shape of Semiflexible Colloidal Rods and Biopolymers

    NARCIS (Netherlands)

    Dennison, M; Dijkstra, M.; van Roij, R.H.H.G.

    2011-01-01

    We study suspensions of semiflexible colloidal rods and biopolymers using an Onsager-type second-virial functional for a segmented-chain model. For mixtures of thin and thick fd virus particles, we calculate full phase diagrams, finding quantitative agreement with experimental observations. We show

  18. Dihedral-based segment identification and classification of biopolymers I: proteins.

    Science.gov (United States)

    Nagy, Gabor; Oostenbrink, Chris

    2014-01-27

    A new structure classification scheme for biopolymers is introduced, which is solely based on main-chain dihedral angles. It is shown that by dividing a biopolymer into segments containing two central residues, a local classification can be performed. The method is referred to as DISICL, short for Dihedral-based Segment Identification and Classification. Compared to other popular secondary structure classification programs, DISICL is more detailed as it offers 18 distinct structural classes, which may be simplified into a classification in terms of seven more general classes. It was designed with an eye to analyzing subtle structural changes as observed in molecular dynamics simulations of biomolecular systems. Here, the DISICL algorithm is used to classify two databases of protein structures, jointly containing more than 10 million segments. The data is compared to two alternative approaches in terms of the amount of classified residues, average occurrence and length of structural elements, and pair wise matches of the classifications by the different programs. In an accompanying paper (Nagy, G.; Oostenbrink, C. Dihedral-based segment identification and classification of biopolymers II: Polynucleotides. J. Chem. Inf. Model. 2013, DOI: 10.1021/ci400542n), the analysis of polynucleotides is described and applied. Overall, DISICL represents a potentially useful tool to analyze biopolymer structures at a high level of detail.

  19. A novel method of providing a library of n-mers or biopolymers

    DEFF Research Database (Denmark)

    2012-01-01

    The present invention relates to a method of providing a library of n-mer sequences, wherein the library is composed of an n-mer sequence. Also the invention concerns a method of providing a library of biopolymer sequences having one or more n-mers in common. Further provided are specific primers...

  20. Single walled carbon nanotubes with functionally adsorbed biopolymers for use as chemical sensors

    Science.gov (United States)

    Johnson, Jr., Alan T

    2013-12-17

    Chemical field effect sensors comprising nanotube field effect devices having biopolymers such as single stranded DNA or RNA functionally adsorbed to the nanotubes are provided. Also included are arrays comprising the sensors and methods of using the devices to detect volatile compounds.

  1. Enzymatic functionalization of cork surface with antimicrobial hybrid biopolymer/silver nanoparticles.

    Science.gov (United States)

    Francesko, Antonio; Blandón, Lucas; Vázquez, Mario; Petkova, Petya; Morató, Jordi; Pfeifer, Annett; Heinze, Thomas; Mendoza, Ernest; Tzanov, Tzanko

    2015-05-13

    Laccase-assisted assembling of hybrid biopolymer-silver nanoparticles and cork matrices into an antimicrobial material with potential for water remediation is herein described. Amino-functional biopolymers were first used as doping agents to stabilize concentrated colloidal dispersions of silver nanoparticles (AgNP), additionally providing the particles with functionalities for covalent immobilization onto cork to impart a durable antibacterial effect. The solvent-free AgNP synthesis by chemical reduction was carried out in the presence of chitosan (CS) or 6-deoxy-6-(ω-aminoethyl) aminocellulose (AC), leading to simultaneous AgNP biofunctionalization. This approach resulted in concentrated hybrid NP dispersion stable to aggregation and with hydrodynamic radius of particles of about 250 nm. Moreover, laccase enabled coupling between the phenolic groups in cork and amino moieties in the biopolymer-doped AgNP for permanent modification of the material. The antibacterial efficiency of the functionalized cork matrices, aimed as adsorbents for wastewater treatment, was evaluated against Escherichia coli and Staphylococcus aureus during 5 days in conditions mimicking those in constructed wetlands. Both intrinsically antimicrobial CS and AC contributed to the bactericidal effect of the enzymatically grafted on cork AgNP. In contrast, unmodified AgNP were easily washed off from the material, confirming that the biopolymers potentiated a durable antibacterial functionalization of the cork matrices.

  2. Mechanical strength of ceramic scaffolds reinforced with biopolymers is comparable to that of human bone

    DEFF Research Database (Denmark)

    Henriksen, S S; Ding, M; Vinther Juhl, M

    2011-01-01

    Eight groups of calcium-phosphate scaffolds for bone implantation were prepared of which seven were reinforced with biopolymers, poly lactic acid (PLA) or hyaluronic acid in different concentrations in order to increase the mechanical strength, without significantly impairing the microarchitectur...

  3. Small Strain Topological Effects of Biopolymer Networks with Rigid Cross-Links

    NARCIS (Netherlands)

    Zagar, G.; Onck, P. R.; Van der Giessen, E.; Garikipati, K; Arruda, EM

    2010-01-01

    Networks of cross-linked filamentous biopolymers form topological structures characterized by L, T and X cross-link types of connectivity 2, 3 and 4, respectively. The distribution of cross-links over these three types proofs to be very important for the initial elastic shear stiffness of isotropic

  4. Effect of Permeability on Aqueous Biopolymer Interfaces in Spinning Drop Experiments

    NARCIS (Netherlands)

    Scholten, E.; Sagis, L.M.C.; Linden, van der E.

    2006-01-01

    In this paper we show that interfaces in aqueous phase-separated biopolymer mixtures are permeable for all components present in the system. In spinning drop experiments, droplets of the low-density phase decreased up to 90% in volume over a time span of days to weeks, when inserted in a matrix of t

  5. Biopolymers Regulate Silver Nanoparticle under Microwave Irradiation for Effective Antibacterial and Antibiofilm Activities.

    Directory of Open Access Journals (Sweden)

    Palaniyandi Velusamy

    Full Text Available In the current study, facile synthesis of carboxymethyl cellulose (CMC and sodium alginate capped silver nanoparticles (AgNPs was examined using microwave radiation and aniline as a reducing agent. The biopolymer matrix embedded nanoparticles were synthesized under various experimental conditions using different concentrations of biopolymer (0.5, 1, 1.5, 2%, volumes of reducing agent (50, 100, 150 μL, and duration of heat treatment (30 s to 240 s. The synthesized nanoparticles were analyzed by scanning electron microscopy, UV-Vis spectroscopy, X-ray diffraction, and Fourier transform infrared spectroscopy for identification of AgNPs synthesis, crystal nature, shape, size, and type of capping action. In addition, the significant antibacterial efficacy and antibiofilm activity of biopolymer capped AgNPs were demonstrated against different bacterial strains, Staphylococcus aureus MTCC 740 and Escherichia coli MTCC 9492. These results confirmed the potential for production of biopolymer capped AgNPs grown under microwave irradiation, which can be used for industrial and biomedical applications.

  6. Dihedral-Based Segment Identification and Classification of Biopolymers I: Proteins

    Science.gov (United States)

    2013-01-01

    A new structure classification scheme for biopolymers is introduced, which is solely based on main-chain dihedral angles. It is shown that by dividing a biopolymer into segments containing two central residues, a local classification can be performed. The method is referred to as DISICL, short for Dihedral-based Segment Identification and Classification. Compared to other popular secondary structure classification programs, DISICL is more detailed as it offers 18 distinct structural classes, which may be simplified into a classification in terms of seven more general classes. It was designed with an eye to analyzing subtle structural changes as observed in molecular dynamics simulations of biomolecular systems. Here, the DISICL algorithm is used to classify two databases of protein structures, jointly containing more than 10 million segments. The data is compared to two alternative approaches in terms of the amount of classified residues, average occurrence and length of structural elements, and pair wise matches of the classifications by the different programs. In an accompanying paper (Nagy, G.; Oostenbrink, C. Dihedral-based segment identification and classification of biopolymers II: Polynucleotides. J. Chem. Inf. Model. 2013, DOI: 10.1021/ci400542n), the analysis of polynucleotides is described and applied. Overall, DISICL represents a potentially useful tool to analyze biopolymer structures at a high level of detail. PMID:24364820

  7. Overview of biopolymers as carriers of antiphlogistic agents for treatment of diverse ocular inflammations.

    Science.gov (United States)

    Sharma, Anil Kumar; Arya, Amit; Sahoo, Pravat Kumar; Majumdar, Dipak Kanti

    2016-10-01

    Inflammation of the eye is a usual clinical condition that can implicate any part of the eye. The nomenclature of variety of such inflammations is based on the ocular part involved. These diseases may jeopardize normal functioning of the eye on progression. In general, corticosteroids, antihistamines, mast cell stabilizers and non-steroidal anti-inflammatory drugs (NSAIDs) are used to treat inflammatory diseases/disorders of the eye. There have been several attempts via different approaches of drug delivery to overcome the low ocular bioavailability resulting from shorter ocular residence time. The features like safety, ease of elimination and ability to sustain drug release have led to application of biopolymers in ocular therapeutics. Numerous polymers of natural origin such as gelatin, collagen, chitosan, albumin, hyaluronic acid, alginates etc. have been successfully employed for preparation of different ocular dosage forms. Chitosan is the most explored biopolymer amongst natural biopolymers because of its inherent characteristics. The emergence of synthetic biopolymers (like PVP, PACA, PCL, POE, polyanhydrides, PLA, PGA and PLGA) has also added new dimensions to the drug delivery strategies meant for treatment of ophthalmic inflammations. The current review is an endeavor to describe the utility of a variety of biomaterials/polymers based drug delivery systems as carrier for anti-inflammatory drugs in ophthalmic therapeutics.

  8. Biopolymers Regulate Silver Nanoparticle under Microwave Irradiation for Effective Antibacterial and Antibiofilm Activities.

    Science.gov (United States)

    Velusamy, Palaniyandi; Su, Chia-Hung; Venkat Kumar, Govindarajan; Adhikary, Shritama; Pandian, Kannaiyan; Gopinath, Subash C B; Chen, Yeng; Anbu, Periasamy

    2016-01-01

    In the current study, facile synthesis of carboxymethyl cellulose (CMC) and sodium alginate capped silver nanoparticles (AgNPs) was examined using microwave radiation and aniline as a reducing agent. The biopolymer matrix embedded nanoparticles were synthesized under various experimental conditions using different concentrations of biopolymer (0.5, 1, 1.5, 2%), volumes of reducing agent (50, 100, 150 μL), and duration of heat treatment (30 s to 240 s). The synthesized nanoparticles were analyzed by scanning electron microscopy, UV-Vis spectroscopy, X-ray diffraction, and Fourier transform infrared spectroscopy for identification of AgNPs synthesis, crystal nature, shape, size, and type of capping action. In addition, the significant antibacterial efficacy and antibiofilm activity of biopolymer capped AgNPs were demonstrated against different bacterial strains, Staphylococcus aureus MTCC 740 and Escherichia coli MTCC 9492. These results confirmed the potential for production of biopolymer capped AgNPs grown under microwave irradiation, which can be used for industrial and biomedical applications.

  9. Fracture mechanisms in biopolymer films using coupling of mechanical analysis and high speed visualization technique

    NARCIS (Netherlands)

    Paes, S.S.; Yakimets, I.; Wellner, N.; Hill, S.E.; Wilson, R.H.; Mitchell, J.R.

    2010-01-01

    The aim of this study was to provide a detailed description of the fracture mechanisms in three different biopolymer thin materials: gelatin, hydroxypropyl cellulose (HPC) and cassava starch films. That was achieved by using a combination of fracture mechanics methodology and in situ visualization w

  10. Parallelized system for biopolymer degradation studies through automated microresonator measurement in liquid flow

    DEFF Research Database (Denmark)

    Casci Ceccacci, Andrea; Morelli, Lidia; Bosco, Filippo

    2015-01-01

    In this work we present a novel automated system which allows the study of enzymatic degradation of biopolymer films coated on micromechanical resonators. The system combines an optical readout based on Blu-Ray technology with a software-controlled scanning mechanism. Integrated with a microfluid...

  11. Biopolymer-Based Nanoparticles for Drug/Gene Delivery and Tissue Engineering

    Directory of Open Access Journals (Sweden)

    Keiji Numata

    2013-01-01

    Full Text Available There has been a great interest in application of nanoparticles as biomaterials for delivery of therapeutic molecules such as drugs and genes, and for tissue engineering. In particular, biopolymers are suitable materials as nanoparticles for clinical application due to their versatile traits, including biocompatibility, biodegradability and low immunogenicity. Biopolymers are polymers that are produced from living organisms, which are classified in three groups: polysaccharides, proteins and nucleic acids. It is important to control particle size, charge, morphology of surface and release rate of loaded molecules to use biopolymer-based nanoparticles as drug/gene delivery carriers. To obtain a nano-carrier for therapeutic purposes, a variety of materials and preparation process has been attempted. This review focuses on fabrication of biocompatible nanoparticles consisting of biopolymers such as protein (silk, collagen, gelatin, β-casein, zein and albumin, protein-mimicked polypeptides and polysaccharides (chitosan, alginate, pullulan, starch and heparin. The effects of the nature of the materials and the fabrication process on the characteristics of the nanoparticles are described. In addition, their application as delivery carriers of therapeutic drugs and genes and biomaterials for tissue engineering are also reviewed.

  12. A review of experimental and modeling techniques to determine properties of biopolymer-based nanocomposites

    Science.gov (United States)

    The nonbiodegradable and nonrenewable nature of plastic packaging has led to a renewed interest in packaging materials based on bio-nanocomposites (biopolymer matrix reinforced with nanoparticles such as layered silicates). One of the reasons for unique properties of bio-nanocomposites is the differ...

  13. Ionic Liquid Microemullsions, Templates for Directing Morphology of Cellulose Biopolymer Nanoparticles (Briefing Charts)

    Science.gov (United States)

    2015-08-19

    Charts 3. DATES COVERED (From - To) July 2015-August 2015 4. TITLE AND SUBTITLE Ionic Liquid Microemullsions, Templates for Directing Morphology of...unlimited AFRL Public Affairs Clearance No. TBD Ionic Liquid Microemullsions, Templates for Directing Morphology of Cellulose Biopolymer...AFRL Public Affairs Clearance No. 15438 Outline • Background on Cellulose and Ionic Liquids • Materials and Methods • Results: Designing an IL

  14. Enzymes as Biodevelopers for Nano- And Micropatterned Bicomponent Biopolymer Thin Films.

    Science.gov (United States)

    Niegelhell, Katrin; Süßenbacher, Michael; Jammernegg, Katrin; Ganner, Thomas; Schwendenwein, Daniel; Schwab, Helmut; Stelzer, Franz; Plank, Harald; Spirk, Stefan

    2016-11-14

    The creation of nano- and micropatterned polymer films is a crucial step for innumerous applications in science and technology. However, there are several problems associated with environmental aspects concerning the polymer synthesis itself, cross-linkers to induce the patterns as well as toxic solvents used for the preparation and even more important development of the films (e.g., chlorobenzene). In this paper, we present a facile method to produce micro- and nanopatterned biopolymer thin films using enzymes as so-called biodevelopers. Instead of synthetic polymers, naturally derived ones are employed, namely, poly-3-hydroxybutyrate and a cellulose derivative, which are dissolved in a common solvent in different ratios and subjected to spin coating. Consequently, the two biopolymers undergo microphase separation and different domain sizes are formed depending on the ratio of the biopolymers. The development step proceeds via addition of the appropriate enzyme (either PHB-depolymerase or cellulase), whereas one of the two biopolymers is selectively degraded, while the other one remains on the surface. In order to highlight the enzymatic development of the films, video AFM studies have been performed in real time to image the development process in situ as well as surface plasmon resonance spectroscopy to determine the kinetics. These studies may pave the way for the use of enzymes in patterning processes, particularly for materials intended to be used in a physiological environment.

  15. The Effect of Sodium Hydroxide on Drag Reduction using a Biopolymer.

    Directory of Open Access Journals (Sweden)

    Singh Harvin Kaur A/P Gurchran

    2014-07-01

    Full Text Available Drag reduction is observed as reduced frictional pressure losses under turbulent flow conditions and hence, substantially increases the flowrate of the fluid. Practical application includes water flooding system, pipeline transport and drainage system. Drag reduction agent, such as polymers, can be introduced to increase the flowrate of water flowing, reducing the water accumulation in the system and subsequently lesser possibility of heavy flooding. Currently used polymer as drag reduction agents is carboxymethylcellulose, to name one. This is a synthetic polymer which will seep into the ground and further harm our environment in excessive use of accumulation. A more environmentally-friendly drag reduction agent, such as the polymer derived from natural sources or biopolymer, is then required for such purpose. As opposed to the synthetic polymers, the potential of biopolymers as drag reduction agents, especially those derived from a local plant source, are not extensively explored. The drag reduction of a polymer produced from a local plant source within the turbulent regime will be explored and assessed in this study using a rheometer where a reduced a torque produced can be perceived as a reduction of drag. The cellulose powder was converted to carboxymethylcellulose (CMC by etherification process using sodium monochloroacetate and sodium hydroxide. The carboxymethylation reaction then was optimized against concentration of NaOH. The research is structured to focus on producing the biopolymer and also assess the drag reduction ability of the biopolymer produced against concentration of sodium hydroxide.

  16. Biopolymer films to control fusarium dry rot and their application to preserve potato tubers

    Science.gov (United States)

    Films were cast using sodium alginate (NaAlg), high molecular weight (HMW) chitosan, and low molecular weight (LMW) chitosan as film forming biopolymers. Fludioxonil (Fl) at 1% concentration was used as fungicide. Thermal stability, mechanical, and water sorption properties of the films were examine...

  17. Strength properties of moulding sands with chosen biopolymer binders

    Directory of Open Access Journals (Sweden)

    St.M. Dobosz

    2010-07-01

    Full Text Available The article presents the results of primary researches of the IV generation moulding sands, in which as the binders are used differentbiodegradable materials. The bending and the tensile strength of the moulding sands with polylactide, poly(lactic-co-glycolic acid,polycaprolactone, polyhydroxybutyrate and cellulose acetate as binders were measured. The researches show that the best strengthproperties have the moulding sands with polylactide as binder. It was proved that the tested moulding sands’ strength properties are goodenough for foundry practice.

  18. The biosynthesis of cyclic carotenes.

    Science.gov (United States)

    Williams, R J; Britton, G; Goodwin, T W

    1967-10-01

    1. The incorporation of (3RS)-[2-(14)C,(4R)-4-(3)H(1)]mevalonic acid into various cyclic carotenes in the fruit of the tomato mutant delta has been studied. The results confirm our previous view that the alpha-ionone ring of alpha-carotene does not arise by isomerization of a beta-ionone residue, and show that the same is also true for the alpha-ionone ring of delta- and in-carotene and alpha-zeacarotene. 2. The incorporation of (3RS)-[2-(14)C,2-(3)H(2)]mevalonic acid into alpha- and beta-carotene in carrot roots has been studied. The results show that the beta-ionone ring of beta-carotene does not arise by isomerization of the alpha-ionone residue of alpha-carotene. 3. These experiments show that alpha- and beta-ionone rings in cyclic carotenes are formed independently, probably by elimination of different protons from the same carbonium ion intermediates.

  19. [Cyclic Cushing's Syndrome - rare or rarely recognized].

    Science.gov (United States)

    Kiałka, Marta; Doroszewska, Katarzyna; Mrozińska, Sandra; Milewicz, Tomasz; Stochmal, Ewa

    2015-01-01

    Cyclic Cushing's syndrome is a type of Cushing's disease which is characterized by alternating periods of increasing and decreasing levels of cortisol in the blood. The diagnostic criteria for cyclic Cushing's syndrome are at least three periods of hypercortisolism alternating with at least two episodes of normal levels of serum cortisol concentration. The epidemiology, signs, symptoms, pathogenesis and treatment of cyclic Cushing's syndrome have been discussed.

  20. Cyclic Cohomology of the Weyl Algebra

    CERN Document Server

    Willwacher, Thomas

    2008-01-01

    We give an explicit formula for symplectically basic representatives of the cyclic cohomology of the Weyl algebra. This paper can be seen as cyclic addendum to the paper by Feigin, Felder and Shoikhet, where the analogous Hochschild case was treated. As an application, we prove a generalization of a Theorem of Nest and Tsygan concerning the relation of the Todd class and the cyclic cohomology of the differential operators on a complex manifold.

  1. Cyclic and Inductive Calculi are equivalent

    CERN Document Server

    Voicu, Razvan

    2011-01-01

    Brotherston and Simpson [citation] have formalized and investigated cyclic reasoning, reaching the important conclusion that it is at least as powerful as inductive reasoning (specifically, they showed that each inductive proof can be translated into a cyclic proof). We add to their investigation by proving the converse of this result, namely that each inductive proof can be translated into an inductive one. This, in effect, establishes the equivalence between first order cyclic and inductive calculi.

  2. Cyclic and Inductive Calculi are equivalent

    OpenAIRE

    Razvan VOICU; Li, Mengran

    2011-01-01

    Brotherston and Simpson [citation] have formalized and investigated cyclic reasoning, reaching the important conclusion that it is at least as powerful as inductive reasoning (specifically, they showed that each inductive proof can be translated into a cyclic proof). We add to their investigation by proving the converse of this result, namely that each inductive proof can be translated into an inductive one. This, in effect, establishes the equivalence between first order cyclic and inductive...

  3. Diaquatetrabromidotin(IV trihydrate

    Directory of Open Access Journals (Sweden)

    Fei Ye

    2012-09-01

    Full Text Available The title compound, [SnBr4(H2O2]·3H2O, forms large colourless crystals in originally sealed samples of tin tetrabromide. It constitutes the first structurally characterized hydrate of SnBr4 and is isostructural with the corresponding hydrate of SnCl4. It is composed of SnIV atoms octahedrally coordinated by four Br atoms and two cis-related water molecules. The octahedra exhibit site symmetry 2. They are arranged into columns along [001] via medium–strong O—H...O hydrogen bonds involving the two lattice water molecules (one situated on a twofold rotation axis while the chains are interconnected via longer O—H...Br hydrogen bonds, forming a three-dimensional network.

  4. Selective hydrodeoxygenation of cyclic vicinal diols to cyclic alcohols over tungsten oxide-palladium catalysts.

    Science.gov (United States)

    Amada, Yasushi; Ota, Nobuhiko; Tamura, Masazumi; Nakagawa, Yoshinao; Tomishige, Keiichi

    2014-08-01

    Hydrodeoxygenation of cyclic vicinal diols such as 1,4-anhydroerythritol was conducted over catalysts containing both a noble metal and a group 5-7 transition-metal oxide. The combination of Pd and WOx allowed the removal of one of the two OH groups selectively. 3-Hydroxytetrahydrofuran was obtained from 1,4-anhydroerythritol in 72 and 74% yield over WOx -Pd/C and WOx -Pd/ZrO2 , respectively. The WOx -Pd/ZrO2 catalyst was reusable without significant loss of activity if the catalyst was calcined as a method of regeneration. Characterization of WOx -Pd/C with temperature-programmed reduction, X-ray diffraction, and transmission electron microscopy/energy-dispersive X-ray spectroscopy suggested that Pd metal particles approximately 9 nm in size were formed on amorphous tungsten oxide particles. A reaction mechanism was proposed on the basis of kinetics, reaction results with tungsten oxides under an atmosphere of Ar, and density functional theory calculations. A tetravalent tungsten center (W(IV) ) was formed by reduction of WO3 with the Pd catalyst and H2 , and this center served as the reductant for partial hydrodeoxygenation.

  5. Decomposition and transformation of cutin and cutan biopolymers in soils: effect on their sorptive capabilities

    Science.gov (United States)

    Shechter, M.; Chefetz, B.

    2009-04-01

    Plant cuticle materials, especially the highly aliphatic biopolymers cutin and cutan, have been reported as highly efficient natural sorbents. The objective of this study was to examine the effects of decomposition on their sorption behavior with naphthol and phenanthrene. The level of cutin and cutan was reduced by 15 and 27% respectively during the first 3 mo of incubation. From that point, the level of the cutan did not change, while the level of the cutin continued to decrease up to 32% after 20 mo. 13C NMR analysis suggested transformation of cutan mainly within its alkyl-C structure which are assigned as crystalline moieties. Cutin, however, did not exhibit significant structure changes with time. The level of humic-like substances increased due to cutin decomposition but was not influenced in the cutan system after 20 mo of incubation. This indicates that the cutin biopolymer has been decomposed and transformed into humic-like substances, whereas the cutan was less subject to transformation. Decomposition affected sorption properties in similar trends for both cutin and cutan. The Freundlich capacity coefficients (KFOC) of naphthol were much lower than phenanthrene and were less influenced by the decomposition, whereas with phenanthrene KFOC values increased significantly with time. Naphthol exhibited non-linear isotherms; and nonlinearity was decreased with incubation time. In contrast, phenanthrene isotherms were more linear and showed only moderate change with time. The decrease in the linearity of naphthol isotherms might relate to the transformation of the sorption sites due to structural changes in the biopolymers. However, with phenanthrene, these changes did not affect sorption linearity but increased sorption affinities mainly for cutan. This is probably due to decomposition of the rigid alkyl-C moieties in the cutan biopolymer. Our data suggest that both biopolymers were relatively stable in the soil for 20 mo. Cutan is less degradable than cutin

  6. Boletus edulis biologically active biopolymers induce cell cycle arrest in human colon adenocarcinoma cells.

    Science.gov (United States)

    Lemieszek, Marta Kinga; Cardoso, Claudia; Ferreira Milheiro Nunes, Fernando Hermínio; Ramos Novo Amorim de Barros, Ana Isabel; Marques, Guilhermina; Pożarowski, Piotr; Rzeski, Wojciech

    2013-04-25

    The use of biologically active compounds isolated from edible mushrooms against cancer raises global interest. Anticancer properties are mainly attributed to biopolymers including mainly polysaccharides, polysaccharopeptides, polysaccharide proteins, glycoproteins and proteins. In spite of the fact that Boletus edulis is one of the widely occurring and most consumed edible mushrooms, antitumor biopolymers isolated from it have not been exactly defined and studied so far. The present study is an attempt to extend this knowledge on molecular mechanisms of their anticancer action. The mushroom biopolymers (polysaccharides and glycoproteins) were extracted with hot water and purified by anion-exchange chromatography. The antiproliferative activity in human colon adenocarcinoma cells (LS180) was screened by means of MTT and BrdU assays. At the same time fractions' cytotoxicity was examined on the human colon epithelial cells (CCD 841 CoTr) by means of the LDH assay. Flow cytometry and Western blotting were applied to cell cycle analysis and protein expression involved in anticancer activity of the selected biopolymer fraction. In vitro studies have shown that fractions isolated from Boletus edulis were not toxic against normal colon epithelial cells and in the same concentration range elicited a very prominent antiproliferative effect in colon cancer cells. The best results were obtained in the case of the fraction designated as BE3. The tested compound inhibited cancer cell proliferation which was accompanied by cell cycle arrest in the G0/G1-phase. Growth inhibition was associated with modulation of the p16/cyclin D1/CDK4-6/pRb pathway, an aberration of which is a critical step in the development of many human cancers including colon cancer. Our results indicate that a biopolymer BE3 from Boletus edulis possesses anticancer potential and may provide a new therapeutic/preventive option in colon cancer chemoprevention.

  7. Biopolymers coated superparamagnetic Nickel Ferrites: Enhanced biocompatibility and MR imaging probe for breast cancer

    Energy Technology Data Exchange (ETDEWEB)

    Bano, Shazia, E-mail: shaziaphy@gmail.com [Department of Physics, The Islamia University of Bahawalpur (Pakistan); Zafar, Tayyaba [Department of Physics, The Islamia University of Bahawalpur (Pakistan); Akhtar, Shahnaz [Department of Pharmacy, The Islamia University of Bahawalpur (Pakistan); Buzdar, Saeed Ahmed [Department of Physics, The Islamia University of Bahawalpur (Pakistan); Waraich, Mustansar Mahmood, E-mail: mustansarwaraich@gmail.com [Quaid-e-Azam Medical College B.V. Hospital, Bahawalpur (Pakistan); Afzal, Muhammad [Department of Physics, The Islamia University of Bahawalpur (Pakistan)

    2016-11-01

    We report evidence for the promising application of bovine serum albumin (BSA), chitosan (CS) or carboxymethyl cellulose (CMC) coated NiFe{sub 2}O{sub 4} cores for improved biocompatibility and enhanced T2 relaxivity, through a single combinatorial approach. Pure nickel-ferrite nano cores (NFs) successfully synthesized by thermolysis, were immobilize with BSA, CS or CMC layer employing a simple cross linking procedure to avoid any significant influence of these biopolymers on the morphology and crystal structure of the cores. Phase, morphology, magnetic hysteresis and surface chemistry were characterized by X-ray diffraction (XRD), Field emission scanning electron microscopy (FE-SEM), vibrating sample magnetometer (VSM) and Fourier transform infrared (FTIR) spectroscopy. The preliminary haemolysis and cell viability experiments show that biopolymers conjugation mitigates the haemolytic effect of the NFs on erythrocytes as the haemolytic index is less than 2% and cell viability is up to 100%, when normalized with the nontreated cells. The relaxivity value of coated NFs is 351±2.6 when compared to 84±0.22 of NFs without biopolymer conjugation. The results demonstrate that BSA, CS or CMC covering on NFs provide a single combinatorial approach to improve the biocompatibility and enhance the relaxivity value. Thus addressing the current challenge of the same with very good contrast for targeting MCF-7 without any further vectorization. - Highlights: • A single combinatorial system for the promising application of biopolymers coated NiFe{sub 2}O{sub 4} cores. • Immobilization of a thin layer of three different biopolymers via a simple approach. • Excellent MR contrast enhancement and targeting of MCF-7 without any further vectorization.

  8. Adsorption of Anionic Dyes on the Biopolymer Chitin

    Directory of Open Access Journals (Sweden)

    Longhinotti Elisane

    1998-01-01

    Full Text Available The adsorption of the anionic dyes orange IV, orange G and xylenol orange on chitin was studied, employing the Langmuir isotherm. The adsorption parameters were determined utilizing various linear regressions of the isotherm. The results showed that the adsorption capacity is dependent on pH. In acid pH, the polymer amino groups are protonated and the polymer chain is positively charged, with a predominance of adsorption through ion exchange. Van der Waals adsorption, as well as adsorption through hydrogen bonding, is also likely to occur to some extent. For xylenol orange, a linear regression was found, with an angular coefficient of 0.726 L mg-1. The temperature increase reduces adsorption capacity by chitin, due to the enhancement of the desorption step in the mechanism. deltaH values of -10.9 kJ mol-1 for orange G and -28.9 kJ mol-1 for orange IV prove the physical nature of the adsorption by these dyes on the chitin surface.

  9. Calysolins I-IV, resin glycosides from Calystegia soldanella.

    Science.gov (United States)

    Takigawa, Ayako; Muto, Haruka; Kabata, Kiyotaka; Okawa, Masafumi; Kinjo, Junei; Yoshimitsu, Hitoshi; Nohara, Toshihiro; Ono, Masateru

    2011-11-28

    Four new resin glycosides having intramolecular cyclic ester structures (jalapins), named calysolins I-IV (1-4), were isolated from the methanol extract of leaves, stems, and roots of Calystegia soldanella , along with one known jalapin (5) derivative. The structures of 1-4 were determined on the basis of spectroscopic data and chemical evidence. They fall into two types, one having a 22-membered ring (1 and 4) and the other with a 27-membered ring (2 and 3). The sugar moieties of 1-4 were partially acylated by some organic acids. Compound 4 is the first example of a hexaglycoside of jalapin.

  10. Shape-memory biopolymers based on β-sheet structures of polyalanine segments inspired by spider silks.

    Science.gov (United States)

    Huang, Huahua; Hu, Jinlian; Zhu, Yong

    2013-02-01

    The molecular structural design learned from natural materials enables synthetic polymers with desirable and unique features to be fabricated. Inspired by spider silks, short-chain polyalanine (PA) is introduced into multiblock biopolymers with poly(ε-caprolactone) segments via a coupling reaction. As a result, PA segments in biopolymers form similar β-sheet crystals to that of natural spidroins. These new biopolymers are found to exhibit nearly complete shape recovery and high shape fixity, along with significantly improved thermal stability due to the strong β-sheet structures as netpoints. This work provides new insight for the design of novel shape-memory polymers with potential use in biomedical applications.

  11. Use of irradiation technique for obtaining and modification of biopolymers; Zastosowanie techniki radiacyjnej do otrzymywania i modyfikacji biopolimerow. Praca pogladowa

    Energy Technology Data Exchange (ETDEWEB)

    Lewandowska-Szumiel, M. [Akademia Medyczna, Warsaw (Poland); Kaluska, I. [Institute of Nuclear Chemistry and Technology, Warsaw (Poland)

    1994-12-31

    A review of papers concerning application of radiation techniques to the biopolymers production is presented. The nature of electron and gamma irradiation influence on polymers is outlined. Advantages of the method from the point of view of biocompatibility and biofunctionality of biopolymers are underlined. Among them the most important are the following: chemical purity of products, high efficiency of the method, expanded influence on polymers` structure, usefulness in the graft copolymerization, ability of avoiding enhanced temperature during polymerization and sterility of products. Examples of biopolymers obtained or modified by means of irradiation techniques are gathered. (author). 35 refs.

  12. dBASE IV basics

    Energy Technology Data Exchange (ETDEWEB)

    O`Connor, P.

    1994-09-01

    This is a user`s manual for dBASE IV. dBASE IV is a popular software application that can be used on your personal computer to help organize and maintain your database files. It is actually a set of tools with which you can create, organize, select and manipulate data in a simple yet effective manner. dBASE IV offers three methods of working with the product: (1) control center: (2) command line; and (3) programming.

  13. Phase IV of Drug Development

    OpenAIRE

    Viraj Suvarna

    2010-01-01

    Not all Phase IV studies are post-marketing surveillance (PMS) studies but every PMS study is a phase IV study. Phase IV is also an important phase of drug development. In particular, the real world effectiveness of a drug as evaluated in an observational, non-interventional trial in a naturalistic setting which complements the efficacy data that emanates from a pre-marketing randomized controlled trial (RCT). No matter how many patients are studied pre-marketing in a controlled environment, ...

  14. Diminished oligomerization in the synthesis of new anti-angiogenic cyclic peptide using solution instead of solid-phase cyclization.

    Science.gov (United States)

    Rubio, Sandra; Clarhaut, Jonathan; Péraudeau, Elodie; Vincenzi, Marian; Soum, Claire; Rossi, Filomena; Guillon, Jean; Papot, Sébastien; Ronga, Luisa

    2016-05-01

    The design and synthesis of novel peptides that inhibit angiogenesis is an important area for anti-angiogenic drug development. Cyclic and small peptides present several advantages for therapeutic application, including stability, solubility, increased bio-availability and lack of immune response in the host cell. We describe here the synthesis and biological evaluations of a new cyclic peptide analog of CBO-P11: cyclo(RIKPHE), designated herein as CBO-P23M, a hexamer peptide encompassing residues 82 to 86 of VEGF which are involved in the interaction with VEGF receptor-2. CBO-P23M was prepared using in solution cyclization, therefore reducing the peptide cyclodimerization occurred during solid-phase cyclization. The cyclic dimer of CBO-P23M, which was obtained as the main side product during synthesis of the corresponding monomer, was also isolated and investigated. Both peptides markedly reduce VEGF-A-induced phosphorylation of VEGFR-2 and Erk1/2. Moreover, they exhibit anti-angiogenic activity in an in vitro morphogenesis study. Therefore CBO-P23M and CBO-P23M dimer appear as attractive candidates for the development of novel angiogenesis inhibitors for the treatment of cancer and other angiogenesis-related diseases. © 2016 Wiley Periodicals, Inc. Biopolymers (Pept Sci) 106: 368-375, 2016.

  15. Confirmatory Factor Analysis of the WAIS-IV/WMS-IV

    Science.gov (United States)

    Holdnack, James A.; Zhou, Xiaobin; Larrabee, Glenn J.; Millis, Scott R.; Salthouse, Timothy A.

    2011-01-01

    The Wechsler Adult Intelligence Scale-fourth edition (WAIS-IV) and the Wechsler Memory Scale-fourth edition (WMS-IV) were co-developed to be used individually or as a combined battery of tests. The independent factor structure of each of the tests has been identified; however, the combined factor structure has yet to be determined. Confirmatory…

  16. Confirmatory Factor Analysis of the WAIS-IV/WMS-IV

    Science.gov (United States)

    Holdnack, James A.; Zhou, Xiaobin; Larrabee, Glenn J.; Millis, Scott R.; Salthouse, Timothy A.

    2011-01-01

    The Wechsler Adult Intelligence Scale-fourth edition (WAIS-IV) and the Wechsler Memory Scale-fourth edition (WMS-IV) were co-developed to be used individually or as a combined battery of tests. The independent factor structure of each of the tests has been identified; however, the combined factor structure has yet to be determined. Confirmatory…

  17. Cell reorientation under cyclic stretching

    CERN Document Server

    Livne, Ariel; Geiger, Benjamin

    2014-01-01

    Mechanical cues from the extracellular microenvironment play a central role in regulating the structure, function and fate of living cells. Nevertheless, the precise nature of the mechanisms and processes underlying this crucial cellular mechanosensitivity remains a fundamental open problem. Here we provide a novel framework for addressing cellular sensitivity and response to external forces by experimentally and theoretically studying one of its most striking manifestations -- cell reorientation to a uniform angle in response to cyclic stretching of the underlying substrate. We first show that existing approaches are incompatible with our extensive measurements of cell reorientation. We then propose a fundamentally new theory that shows that dissipative relaxation of the cell's passively-stored, two-dimensional, elastic energy to its minimum actively drives the reorientation process. Our theory is in excellent quantitative agreement with the complete temporal reorientation dynamics of individual cells, measu...

  18. Cyclic electrophoretic and chromatographic separation methods

    NARCIS (Netherlands)

    Eijkel, Jan C.T.; Berg, van den Albert; Manz, Andreas

    2004-01-01

    A review is given of the application of cyclic analytical methods in capillary electroseparation (CE) and liquid chromatography (LC) systems. Cyclic methods have been used since the early sixties in chromatographic systems to overcome pressure limitations to resolution. From the early nineties on th

  19. Cyclicality in Losses on Bank Loans

    NARCIS (Netherlands)

    B. Keijsers (Bart); B.F. Diris (Bart); H.J.W.G. Kole (Erik)

    2015-01-01

    markdownabstract__Abstract__ Cyclicality in the losses of bank loans is important for bank risk management. Because loans have a different risk profile than bonds, evidence of cyclicality in bond losses need not apply to loans. Based on unique data we show that the default rate and loss given defau

  20. Cyclic malyl anthocyanins in Dianthus caryophyllus.

    Science.gov (United States)

    Nakayama, M; Koshioka, M; Yoshida, H; Kan, Y; Fukui, Y; Koike, A; Yamaguchi, M

    2000-12-01

    3,5-Di-O-(beta-glucopyranosyl) pelargonidin 6''-O-4,6'''-O-1-cyclic malate and a previously reported cyanidin equivalent, 3,5-di-O-(beta-glucopyranosyl) cyanidin 6''-O-4,6'''-O-1-cyclic malate were identified from petals of deep pink and red-purple flower cultivars of Dianthus caryophyllus, respectively.

  1. A CRADLE TO GATE LIFE CYCLE ANALYSIS OF THE BIOPOLYMER POLYLACTIC ACID: LOOKING BEYOND GLOBAL WARMING AND FOSSIL FUEL USE

    Science.gov (United States)

    Derived from corn, the biopolymer polylactic acid (PLA) has recently emerged in the marketplace and is advertised as a sustainable alternative to petroleum-based polymers. Research into the environmental implications of biobased production has focused primarily on global warming...

  2. A CRADLE TO GATE LIFE CYCLE ANALYSIS OF THE BIOPOLYMER POLYLACTIC ACID: LOOKING BEYOND GLOBAL WARMING AND FOSSIL FUEL USE

    Science.gov (United States)

    Derived from corn, the biopolymer polylactic acid (PLA) has recently emerged in the marketplace and is advertised as a sustainable alternative to petroleum-based polymers. Research into the environmental implications of biobased production has focused primarily on global warming...

  3. Products in Hopf-Cyclic Cohomology

    CERN Document Server

    Kaygun, Atabey

    2007-01-01

    We construct several pairings in Hopf-cyclic cohomology of (co)module (co)algebras with arbitrary coefficients. The key ideas instrumental in constructing these pairings are the derived functor interpretation of Hopf-cyclic and equivariant cyclic (co)homology, and the Yoneda interpretation of Ext-groups. As a special case of one of these pairings, we recover the Connes-Moscovici characteristic map in Hopf-cyclic cohomology. We also prove that this particular pairing, along with few others, would stay the same if we replace the derived category of (co)cyclic modules with the homotopy category of (special) towers of $X$-complexes, or the derived category of mixed complexes.

  4. DSM-IV Progress Report.

    Science.gov (United States)

    Hohenshil, Thomas H.

    1992-01-01

    Notes that Diagnostic and Statistical Manual of Mental Disorders fourth edition (DSM-IV) will become one of most frequently used reference documents in counseling profession. Describes progress being made in development of DSM-IV, scheduled for publication in 1994. Describes revision process and proposed organizational changes and new diagnostic…

  5. Layer-by-Layer films based on biopolymers extracted from red seaweeds and polyaniline for applications in electrochemical sensors of chromium VI

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira Farias, Emanuel Airton de; Corrêa dos Santos, Marianne; Araujo Dionísio, Natália de; Quelemes, Patrick V.; Souza Almeida Leite, José Roberto de [Núcleo de Pesquisa em Biodiversidade e Biotecnologia, BIOTEC, CMRV, UFPI, Parnaíba, PI 64202-020 (Brazil); Eaton, Peter [UCIBIO, REQUIMTE, Departamento de Química e Bioquímica, Faculdade de Ciências, Universidade do Porto, 4169-007 Porto (Portugal); Alves da Silva, Durcilene [Núcleo de Pesquisa em Biodiversidade e Biotecnologia, BIOTEC, CMRV, UFPI, Parnaíba, PI 64202-020 (Brazil); Eiras, Carla, E-mail: eiras@cnpq.br [Núcleo de Pesquisa em Biodiversidade e Biotecnologia, BIOTEC, CMRV, UFPI, Parnaíba, PI 64202-020 (Brazil); Laboratório Interdisciplinar de Materiais Avançados, LIMAV, CCN, UFPI, Teresina, PI 64049-550 (Brazil)

    2015-10-15

    Graphical abstract: - Highlights: • LbL films based on PANI and polysaccharides of seaweeds were produced and applied sensors of Cr (VI). - Abstract: This paper proposes a new application for natural polysaccharides (agar and carrageenan), both extracted from the cell wall of red seaweeds. Thin films were prepared by the Layer-by-Layer (LbL) self-assembly technique onto ITO (tin-doped indium oxide), where the polysaccharides of interest were deposited in layers alternating with polyaniline (PANI). The films developed were characterized by cyclic voltammetry (CV), ultraviolet–visible spectroscopy (UV–vis) and atomic force microscopy (AFM). Results showed the presence of agar as well as carrageenan, which improves the electrochemical stability of the conducting polymer in an acid medium. The interactions at the molecular level between PANI and the biopolymers affected the most appropriate sequence of deposition as employed in the process of material immobilization and also influenced the resulting morphology. Among the films studied, the most promising system as regards electrochemical measurements was the ITO/agar/PANI system, which was subsequently employed in the electrochemical detection of chromium (VI)

  6. Evaluation of Rhizobium tropici-derived Biopolymer for Erosion Control of Protective Berms. Field Study: Iowa Army Ammunition Plant

    Science.gov (United States)

    2016-06-01

    of the berm that channeled runoff water into the area of the slip. Slope stabilization using biopolymer is approximately half the cost of...resources. When wetted, the biopolymer will form a gel within the soil matrix. With the soil acting as a buffer, the ionic character of the polymer...detailed view of the weathered West face of the berm. The red color indicates soil loss, marking the creation of erosion channels across the face

  7. Studies on amendment of different biopolymers in sandy loam and their effect on germination, seedling growth of Gossypium herbaceum L.

    Science.gov (United States)

    Patil, Satish Vitthalrao; Salunke, B K; Patil, C D; Salunkhe, R B

    2011-03-01

    Different biopolymers, agar, cellulose, alginate, psyllium gaur gum, and bacterial exopolysaccharide (EPS) powders were amended to check their efficacy in enhancing maximum water holding capacity (MWHC), permanent wilting point (PWP), and germination and seedling growth of the Gossypium herbaceum in a laboratory scale. The efficacy of all biopolymers for enhancement of MWHC, PWP, and growth was also analyzed by measuring organic carbon, organic matter, total nitrogen, respiration rate, and microflora in amended and control sandy loams. The range of concentrations (0.2-2%) of all biopolymers was incorporated in sandy loam containing pots. The soil without polymer was considered as control. The psyllium (0.6%) and bacterial EPS (1%) amended soil has 242 and 233% increase in MWHC and thus delaying in the permanent wilting point by 108 and 84 h at 37 °C, respectively, as compared to control. All biopolymers found to increase more or less MWHC, organic matter, total nitrogen, microflora, and PWP as compared to control. The psyllium and bacterial EPS show the highest increase organic matter, biomass, and microflora. The highest reduction in MWHC after 12 weeks were observed in cellulose, gaur gum, and alginate; besides, psyllium, bacterial EPS, and agar showed comparatively less reduction MWHC, i.e., 24% and 14.5%, respectively. The toxicity studies of biopolymer were carried out on earthworm (Eisenia foetida). It revealed their nontoxic nature. The biopolymer amendment in sandy loam can be an effective strategy to improved soil texture, fertility, and thereby crop yield.

  8. Specificity of the Cyclic GMP-Binding Activity and of a Cyclic GMP-Dependent Cyclic GMP Phosphodiesterase in Dictyostelium discoideum

    NARCIS (Netherlands)

    Haastert, Peter J.M. van; Walsum, Hans van; Meer, Rob C. van der; Bulgakov, Roman; Konijn, Theo M.

    1982-01-01

    The nucleotide specificity of the cyclic GMP-binding activity in a homogenate of Dictyostelium discoideum was determined by competition of cyclic GMP derivatives with [8-3H] cyclic GMP for the binding sites. The results indicate that cyclic GMP is bound to the binding proteins by hydrogen bonds at N

  9. Studies of antibacterial efficacy of different biopolymer protected silver nanoparticles synthesized under reflux condition

    Science.gov (United States)

    Su, Chia Hung; Velusamy, Palaniyandi; Kumar, Govindarajan Venkat; Adhikary, Shritama; Pandian, Kannaiyan; Anbu, Periyasamy

    2017-01-01

    In the present study, a simple method to impregnate silver nanoparticles (AgNPs) into carboxymethyl cellulose (CMC) and sodium alginate (SA) is reported for the first time. Single step synthesis of carboxymethyl cellulose (CMC) and sodium alginate (SA) biopolymer protected silver nanoparticles (AgNPs) using aniline as a reducing agent under reflux conditions was investigated. The synthesized nanoparticles were characterized by UV-Vis spectrophotometry, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and field emission scanning electron microscopy (FESEM). The FESEM results of CMC@AgNPs and SA@AgNPs showed the formation of spherical nanoparticles sized 30-60 nm. Testing of the antibiofilm efficacy of the polymer protected AgNPs against different bacterial strains such as Klebsiella pneumoniae MTCC 4032 and Streptococcus pyogenes MTCC 1924 revealed that the biopolymer protected AgNPs had excellent antibiofilm activity.

  10. Effect of disorder on the contact probability of elongated conformations of biopolymers.

    Science.gov (United States)

    Tiana, Guido

    2015-07-01

    Biopolymers are characterized by heterogeneous interactions, and usually perform their biological tasks forming contacts within domains of limited size. Combining polymer theory with a replica approach, we study the scaling properties of the probability of contact formation in random heteropolymers as a function of their linear distance. It is found that, close to or above the θ point, it is possible to define a contact probability which is typical (i.e., "self-averaging") for different realizations of the heterogeneous interactions, and which displays an exponential cutoff, dependent on temperature and on the interaction range. In many cases this cutoff is comparable with the typical sizes of domains in biopolymers. While it is well known that disorder causes interesting effects at low temperature, the behavior elucidated in the present study is an example of a nontrivial effect at high temperature.

  11. Stretching instability of intrinsically curved semiflexible biopolymers:A lattice model approach

    Institute of Scientific and Technical Information of China (English)

    周子聪; 林方庭; 陈柏翰

    2015-01-01

    We apply Monte Carlo simulation method to lattice systems to study the effect of an intrinsic curvature on the me-chanical property of a semifl exible biopolymer. We find that when the intrinsic curvature is sufficient large, the extension of a semifl exible biopolymer can undergo a first-order transition at finite temperature. The critical force increases with in-creasing intrinsic curvature. But the relationship between the critical force and the bending rigidity is structure-dependent. In triangle lattice system, when the intrinsic curvature is smaller than a critical value, the critical force increases with the increasing bending rigidity first, and then decreases with the increasing bending rigidity. But in square lattice system, the critical force always decreases with the increasing bending rigidity. In contrast, when the intrinsic curvature is greater than the critical value, the larger bending rigidity always results in a larger critical force in both lattice systems.

  12. Preserving the Sequence of a Biopolymer's Monomers as They Enter an Electrospray Mass Spectrometer

    Science.gov (United States)

    Maulbetsch, William; Wiener, Benjamin; Poole, William; Bush, Joseph; Stein, Derek

    2016-11-01

    This paper investigates how faithfully an electrospray mass spectrometer reports the order of monomers of a single biopolymer in the context of two sequencing strategies. We develop a simplified one-dimensional theoretical model of the dynamics of Brownian particles in the Taylor cone of an electropray source, where free monomers drift towards the apex in an elongational force gradient. The likelihood that neighboring particles will invert their order decreases near the apex because the strength of the force gradient increases. Neighboring monomers on a stretched biopolymer should be cleaved by photofragmentation within about 3 nm of the apex if they are to enter the mass spectrometer in sequence with 95% probability under typical experimental conditions. Alternatively, if the monomers are cleaved processively at milliseconds-long intervals by an enzyme, their sequence will be faithfully reported with 95% confidence if the enzyme is within about 117 nm of the apex.

  13. Extraction of alginate biopolymer present in marine alga sargassum filipendula and bioadsorption of metallic ions

    Directory of Open Access Journals (Sweden)

    Sirlei Jaiana Kleinübing

    2013-04-01

    Full Text Available This paper studies the bioadsorption of Pb2+, Cu2+, Cd2+ and Zn2+ ions by marine alga Sargassum filipendula and by the alginate biopolymer extracted from this alga. The objective is to evaluate the importance of this biopolymer in removing different metallic ions by the marine alga S. filipendula. In the equilibrium study, the same affinity order was observed for both bioadsorbents: Pb2+ > Cu2+ > Zn2+ > Cd2+. For Pb2+ and Cu2+ ions when the alginate is isolated and acting as bioadsorbents, adsorption capacities greater than those found for the alga were observed, indicating that it is the main component responsible for the removal of metallic ions. For Zn2+ and Cd2+ ions, greater bioadsorption capacities were observed for the alga, indicating that other functional groups of the alga, such as sulfates and amino, are also important in the bioadsorption of these ions.

  14. Long-Lived Conformation Changes Induced by Electric Impulses in Biopolymers

    Science.gov (United States)

    Neumann, Eberhard; Katchalsky, Aharon

    1972-01-01

    Electric impulses are capable of inducing long-lived conformational changes in (metastable) biopolymers. Results of experiments with poly(A)·2 poly(U) and ribosomal RNA, which are known to develop metastabilities, are reported. A polarization mechanism is proposed to explain the structural transitions observed in the biopolymers exposed to the impulses. In accordance with this idea, the applied electric field (of about 20 kV/cm and decaying exponentially, with a decay time of about 10 μsec) induces large dipole moments by shifting the ionic atmosphere of multistranded polynucleotide helices. This shift, in turn, causes strand repulsion and partial unwinding. The fields used in our experiments are of the same order of magnitude as those in nerve impulses. The significance of the impulse experiments with regard to the question of biological memory recording is briefly discussed. PMID:4502948

  15. Keratin Protein-Catalyzed Nitroaldol (Henry Reaction and Comparison with Other Biopolymers

    Directory of Open Access Journals (Sweden)

    Marleen Häring

    2016-08-01

    Full Text Available Here we describe a preliminary investigation on the ability of natural keratin to catalyze the nitroaldol (Henry reaction between aldehydes and nitroalkanes. Both aromatic and heteroaromatic aldehydes bearing strong or moderate electron-withdrawing groups were converted into the corresponding β-nitroalcohol products in both DMSO and in water in the presence of tetrabutylammonium bromide (TBAB as a phase transfer catalyst. Negligible background reactions (i.e., negative control experiment in the absence of keratin protein were observed in these solvent systems. Aromatic aldehydes bearing electron-donating groups and aliphatic aldehydes showed poor or no conversion, respectively. In general, the reactions in water/TBAB required twice the amount of time than in DMSO to achieve similar conversions. Moreover, comparison of the kinetics of the keratin-mediated nitroaldol (Henry reaction with other biopolymers revealed slower rates for the former and the possibility of fine-tuning the kinetics by appropriate selection of the biopolymer and solvent.

  16. Keratin Protein-Catalyzed Nitroaldol (Henry) Reaction and Comparison with Other Biopolymers.

    Science.gov (United States)

    Häring, Marleen; Pettignano, Asja; Quignard, Françoise; Tanchoux, Nathalie; Díaz Díaz, David

    2016-08-25

    Here we describe a preliminary investigation on the ability of natural keratin to catalyze the nitroaldol (Henry) reaction between aldehydes and nitroalkanes. Both aromatic and heteroaromatic aldehydes bearing strong or moderate electron-withdrawing groups were converted into the corresponding β-nitroalcohol products in both DMSO and in water in the presence of tetrabutylammonium bromide (TBAB) as a phase transfer catalyst. Negligible background reactions (i.e., negative control experiment in the absence of keratin protein) were observed in these solvent systems. Aromatic aldehydes bearing electron-donating groups and aliphatic aldehydes showed poor or no conversion, respectively. In general, the reactions in water/TBAB required twice the amount of time than in DMSO to achieve similar conversions. Moreover, comparison of the kinetics of the keratin-mediated nitroaldol (Henry) reaction with other biopolymers revealed slower rates for the former and the possibility of fine-tuning the kinetics by appropriate selection of the biopolymer and solvent.

  17. Nanofoaming in the surface of biopolymers by femtosecond pulsed laser irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Gaspard, S.; Oujja, M.; Nalda, R. de [Rocasolano Institute of Physical Chemistry, CSIC, Serrano 119, 28006 Madrid (Spain); Abrusci, C.; Catalina, F. [Institute of Polymer Science and Technology, CSIC, Juan de la Cierva 3, 28006 Madrid (Spain); Banares, L. [Department of Physical Chemistry, Faculty of Chemistry, Universidad Complutense de Madrid, 28040 Madrid (Spain); Lazare, S. [Institut des Sciences Moleculaires UMR 5255, Universite de Bordeaux 1, Talence (France); Castillejo, M. [Rocasolano Institute of Physical Chemistry, CSIC, Serrano 119, 28006 Madrid (Spain)], E-mail: marta.castillejo@iqfr.csic.es

    2007-12-15

    In this work, the nanostructuring induced in femtosecond (fs) laser irradiation of biopolymers is examined in self-standing films of collagen and gelatine. Irradiation by single 90 fs pulses at 800, 400 and 266 nm is shown to result in the formation of a modified layer with submicrometric size structures. The size and uniformity of the observed features are strongly dependent on irradiation wavelength and on the characteristics of the biopolymer (water content and mechanical strength). Examination of the films by laser induced fluorescence serves to assess the chemical modifications induced by laser irradiation, revealing changes in the emission bands assigned to the aromatic amino acid tyrosine and its degradation products. The results are discussed in the framework of a mechanism involving the generation of large free-electron densities, through multiphoton and avalanche ionization, which determine the temperature and stress distribution in the irradiated volume.

  18. Stereolithographic models of the solvent-accessible surface of biopolymers. Topical report

    Energy Technology Data Exchange (ETDEWEB)

    Bradford, J. [Olathe South High School, KS (United States); Noel, P. [Center High School, Kansas City, MO (United States); Emery, J.D. [and others

    1996-11-01

    The solvent-accessible surfaces of several biopolymers were calculated. As part of the DOE education outreach activity, two high school students participated in this project. Computer files containing sets of triangles were produced. These files are called stl files and are the ISO 9001 standard. They have been written onto CD-ROMs for distribution to American companies. Stereolithographic models were made of some of them to ensure that the computer calculations were done correctly. Stereolithographic models were made of interleukin 1{beta} (IL-1{beta}), three antibodies (an anti-p-azobenzene arsonate, an anti-Brucella A cell wall polysaccharide, and an HIV neutralizing antibody), a triple stranded coiled coil, and an engrailed homeodomain. Also, the biopolymers and their files are described.

  19. Production and Characterization of Biopolymer by Plant Growth Promoting Bacterial Strain Cronobacter malonaticus BR-1

    Directory of Open Access Journals (Sweden)

    Parth V. Bhatt

    2015-02-01

    Full Text Available Rhizobacterial isolate Cronobacter malonaticus BR-1 having multiple plant growth promoting activity produced 2.5 mg/lit exopolysaccharide (EPS, and solubilized inorganic phosphate (220-371 µg/ml under varying physiological conditions like temperature, pH and salt. EPS was purified and analyzed biochemically by HPTLC and GC-MS for the major amino acid and fatty acid moieties. It suggested glutamic acid as a major amino acid moiety whereas palmitic acid, linoleic acid, elaidic acid and stearic acid as major fatty acid moieties. Quantitative analysis of biopolymer suggested presence of 27% sugar and 2.5% protein. Biopolymer production at different pH, temperature, incubation time and effect of sugar as a sole carbon source was evaluated. Pot trial experiments using barley plants inoculated with Cronobacter malonaticus BR-1 showed statistically significant increase in the root and shoot length and plant.

  20. The estimation of ability to reclame of moduling sands with biopolymer binders

    Directory of Open Access Journals (Sweden)

    J. Jakubski

    2011-04-01

    Full Text Available Applied up till now organic binding materials, on the basis of synthetic resins are characterised by good technological properties, but cause high emission of harmful substances. That’s why contemporary scientific researches are leading to progressive replacing the binders obtained from petrochemical materials with polymer biocomposites coming from renewable resources. Increasing concern of aliphatic polyesters such as polylactide, polycaprolactone, poly(hydroxyalkanoates and aliphatic-aromatic polyesters is caused by the possibility of using them for producing many biodegradable products. In that context it is important to expand the researches connected to using biopolymers as moulding sands binders. Contemporary authors’ papers were focused on technological properties and harmfulness for the environment of this ecological moulding sands. TThis article takes into consideration the ability to reclamation of moulding sands with biopolymer binders.

  1. Cyclic Shearing Deformation Behavior of Saturated Clays

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The apparatus for static and dynamic universal triaxial and torsional shear soil testing is employed to perform stress-controlled cyclic single-direction torsional shear tests and two-direction coupled shear tests under unconsolidated-undrained conditions. Through a series of tests on saturated clay, the effects of initial shear stress and stress reversal on the clay's strain-stress behavior are examined, and the behavior of pore water pressure is studied. The experimental results indicate that the patterns of stress-strain relations are distinctly influenced by the initial shear stress in the cyclic single-direction shear tests. When the initial shear stress is large and no stress reversal occurs, the predominant deformation behavior is characterized by an accumulative effect. When the initial shear stress is zero and symmetrical cyclic stress occurs, the predominant deformation behavior is characterized by a cyclic effect. The pore water pressure fluctuates around the confining pressure with the increase of cycle number. It seems that the fluctuating amplitude increases with the increase of the cyclic stress. But a buildup of pore water pressure does not occur. The deformations of clay samples under the complex initial and the cyclic coupled stress conditions include the normal deviatoric deformation and horizontal shear deformation, the average deformation and cyclic deformation. A general strain failure criterion taking into account these deformations is recommended and is proved more stable and suitable compared to the strain failure criteria currently used.

  2. Its preferential interactions with biopolymers account for diverse observed effects of trehalose.

    Science.gov (United States)

    Hong, Jiang; Gierasch, Lila M; Liu, Zhicheng

    2015-07-07

    Biopolymer homeostasis underlies the health of organisms, and protective osmolytes have emerged as one strategy used by Nature to preserve biopolymer homeostasis. However, a great deal remains unknown about the mechanism of action of osmolytes. Trehalose, as a prominent example, stabilizes proteins against denaturation by extreme temperature and denaturants, preserves membrane integrity upon freezing or in dry conditions, inhibits polyQ-mediated protein aggregation, and suppresses the aggregation of denatured proteins. The underlying thermodynamic mechanisms of such diverse effects of trehalose remain unclear or controversial. In this study, we applied the surface-additive method developed in the Record laboratory to attack this issue. We characterized the key features of trehalose-biopolymer preferential interactions and found that trehalose has strong unfavorable interactions with aliphatic carbon and significant favorable interactions with amide/anionic oxygen. This dissection has allowed us to elucidate the diverse effects of trehalose and to identify the crucial functional group(s) responsible for its effects. With (semi)quantitative thermodynamic analysis, we discovered that 1) the unfavorable interaction of trehalose with hydrophobic surfaces is the dominant factor in its effect on protein stability, 2) the favorable interaction of trehalose with polar amides enables it to inhibit polyQ-mediated protein aggregation and the aggregation of denatured protein in general, and 3) the favorable interaction of trehalose with phosphate oxygens, together with its unfavorable interaction with aliphatic carbons, enables trehalose to preserve membrane integrity in aqueous solution. These results provide a basis for a full understanding of the role of trehalose in biopolymer homeostasis and the reason behind its evolutionary selection as an osmolyte, as well as for a better application of trehalose as a chemical chaperone.

  3. Its Preferential Interactions with Biopolymers Account for Diverse Observed Effects of Trehalose

    Science.gov (United States)

    Hong, Jiang; Gierasch, Lila M.; Liu, Zhicheng

    2015-01-01

    Biopolymer homeostasis underlies the health of organisms, and protective osmolytes have emerged as one strategy used by Nature to preserve biopolymer homeostasis. However, a great deal remains unknown about the mechanism of action of osmolytes. Trehalose, as a prominent example, stabilizes proteins against denaturation by extreme temperature and denaturants, preserves membrane integrity upon freezing or in dry conditions, inhibits polyQ-mediated protein aggregation, and suppresses the aggregation of denatured proteins. The underlying thermodynamic mechanisms of such diverse effects of trehalose remain unclear or controversial. In this study, we applied the surface-additive method developed in the Record laboratory to attack this issue. We characterized the key features of trehalose-biopolymer preferential interactions and found that trehalose has strong unfavorable interactions with aliphatic carbon and significant favorable interactions with amide/anionic oxygen. This dissection has allowed us to elucidate the diverse effects of trehalose and to identify the crucial functional group(s) responsible for its effects. With (semi)quantitative thermodynamic analysis, we discovered that 1) the unfavorable interaction of trehalose with hydrophobic surfaces is the dominant factor in its effect on protein stability, 2) the favorable interaction of trehalose with polar amides enables it to inhibit polyQ-mediated protein aggregation and the aggregation of denatured protein in general, and 3) the favorable interaction of trehalose with phosphate oxygens, together with its unfavorable interaction with aliphatic carbons, enables trehalose to preserve membrane integrity in aqueous solution. These results provide a basis for a full understanding of the role of trehalose in biopolymer homeostasis and the reason behind its evolutionary selection as an osmolyte, as well as for a better application of trehalose as a chemical chaperone. PMID:26153711

  4. Wetting of biopolymer coatings: contact angle kinetics and image analysis investigation.

    Science.gov (United States)

    Farris, Stefano; Introzzi, Laura; Biagioni, Paolo; Holz, Torsten; Schiraldi, Alberto; Piergiovanni, Luciano

    2011-06-21

    The surface wetting of five biopolymers, used as coating materials for a plastic film, was monitored over a span of 8 min by means of the optical contact angle technique. Because most of the total variation was observed to occur during the first 60 s, we decided to focus on this curtailed temporal window. Initial contact angle values (θ(0)) ranged from ∼91° for chitosan to ∼30° for pullulan. However, the water drop profile began to change immediately following drop deposition for all biocoatings, confirming that the concept of water contact angle equilibrium is not applicable to most biopolymers. First, a three-parameter decay equation [θ(t) = θ(0) exp(kt(n))] was fit to the experimental contact angle data to describe the kinetics of the contact angle change for each biocoating. Interestingly, the k constant correlated well with the contact angle evolution rate and the n exponent seemed to be somehow linked to the physicochemical phenomena underlying the overall kinetics process. Second, to achieve a reliable description of droplet evolution, the contact angle (CA) analysis was coupled with image analysis (IA) through a combined geometric/trigonometric approach. Absorption and spreading were the key factors governing the overall mechanism of surface wetting during the 60 s analysis, although the individual quantification of both phenomena demonstrated that spreading provided the largest contribution for all biopolymers, with the only exception of gelatin, which showed two quasi-equivalent and counterbalancing effects. The possible correlation between these two phenomena and the topography of the biopolymer surfaces are then discussed on the basis of atomic force microscopy analyses.

  5. Biopolymers production with carbon source from the wastes of a beer brewery industry

    Science.gov (United States)

    Wong, Phoeby Ai Ling

    The main purpose of this study was to assess the potential and feasibility of malt wastes, and other food wastes, such as soy wastes, ice-cream wastes, confectionery wastes, vinegar wastes, milk waste and sesame oil, in the induction of biosynthesis of PHA, in the cellular assembly of novel PHA with improved physical and chemical properties, and in the reduction of the cost of PHA production. In the first part of the experiments, a specific culture of Alcaligenes latus DSM 1124 was selected to ferment several types of food wastes as carbon sources into biopolymers. In addition, the biopolymer production, by way of using malt waste, of microorganisms from municipal activated sludge was also investigated. In the second part, the experiments focused on the synthesis of biopolymer with a higher molecular mass via the bacterial strain, which was selected and isolated from sesame oil, identified as Staphylococcus epidermidis . Molecular weight and molecular weight distribution of PHB were studied by GPC. Molecular weight of PHB produced from various types of food wastes by Alcaligenes latus was higher than using synthetic sucrose medium as nutrient, however, it resulted in the reverse by Staphylococcus epidermidis. Thermal properties of biopolymers were studied by DSC and TG. Using malt wastes as nutrients by Alcaligenes latus gave a higher melting temperature. Using sucrose, confectionery and sesame oil as nutrients by Staphylococcus epidermidis gave higher melting temperature. Optimization was carried out for the recovery of microbial PHB from Alcaligenes latus. Results showed that molecular weight can be controlled by changing the hypochlorite concentration, the ratio of chloroform to hypochlorite solution and the extraction time. In addition, the determination of PHB content by thermogravimetric analysis method with wet cell was the first report in our study. (Abstract shortened by UMI.)

  6. Overview of biopolymers as carriers of antiphlogistic agents for treatment of diverse ocular inflammations

    Energy Technology Data Exchange (ETDEWEB)

    Sharma, Anil Kumar, E-mail: sharmarahul2004@gmail.com [Delhi Institute of Pharmaceutical Sciences and Research, Formerly College of Pharmacy, University of Delhi, Pushp Vihar, Sector III, New Delhi 110017,India (India); Arya, Amit; Sahoo, Pravat Kumar [Delhi Institute of Pharmaceutical Sciences and Research, Formerly College of Pharmacy, University of Delhi, Pushp Vihar, Sector III, New Delhi 110017,India (India); Majumdar, Dipak Kanti [School of Pharmaceutical Sciences, Apeejay Stya University, Sohna-Palwal Road, Gurgaon 122103 (India)

    2016-10-01

    Inflammation of the eye is a usual clinical condition that can implicate any part of the eye. The nomenclature of variety of such inflammations is based on the ocular part involved. These diseases may jeopardize normal functioning of the eye on progression. In general, corticosteroids, antihistamines, mast cell stabilizers and non-steroidal anti-inflammatory drugs (NSAIDs) are used to treat inflammatory diseases/disorders of the eye. There have been several attempts via different approaches of drug delivery to overcome the low ocular bioavailability resulting from shorter ocular residence time. The features like safety, ease of elimination and ability to sustain drug release have led to application of biopolymers in ocular therapeutics. Numerous polymers of natural origin such as gelatin, collagen, chitosan, albumin, hyaluronic acid, alginates etc. have been successfully employed for preparation of different ocular dosage forms. Chitosan is the most explored biopolymer amongst natural biopolymers because of its inherent characteristics. The emergence of synthetic biopolymers (like PVP, PACA, PCL, POE, polyanhydrides, PLA, PGA and PLGA) has also added new dimensions to the drug delivery strategies meant for treatment of ophthalmic inflammations. The current review is an endeavor to describe the utility of a variety of biomaterials/polymers based drug delivery systems as carrier for anti-inflammatory drugs in ophthalmic therapeutics. - Highlights: • Numerous eye inflammations pose troubles in vision functions. • Low bioavailability by conventional drug delivery systems due to eye constraints • Drug carriers ensuring improved bioavailability to the eye are need of the hour. • Chitosan - most explored amongst all biomaterials for ocular delivery. • Emergence of novel synthetic carriers in ophthalmology.

  7. Biomedical Biopolymers, their Origin and Evolution in Biomedical Sciences: A Systematic Review

    OpenAIRE

    Yadav, Preeti; Yadav, Harsh; Shah, Veena Gowri; Shah, Gaurav; Dhaka, Gaurav

    2015-01-01

    Biopolymers provide a plethora of applications in the pharmaceutical and medical applications. A material that can be used for biomedical applications like wound healing, drug delivery and tissue engineering should possess certain properties like biocompatibility, biodegradation to non-toxic products, low antigenicity, high bio-activity, processability to complicated shapes with appropriate porosity, ability to support cell growth and proliferation and appropriate mechanical properties, as we...

  8. The Modern RPG IV Language

    CERN Document Server

    Cozzi, Robert

    2006-01-01

    This updated, classic work on the RPG language covers all the new functions and features that have been added since 2003, including new op codes and built-in functions, new chapters on free-format RPG IV and Web programming interfaces, information on implementing XML within RPG IV, and expanded information on procedures. This reference guide takes both novice and experienced RPG IV programmers through the language, from its foundation to its most advanced techniques. More than 100 charts and tables, as well as 350 real-life code samples of functions and operations are included, showing readers

  9. Bioprocess Engineering Aspects of Biopolymer Production by the Cyanobacterium Spirulina Strain LEB 18

    Directory of Open Access Journals (Sweden)

    Roberta Guimarães Martins

    2014-01-01

    Full Text Available Microbial biopolymers can replace environmentally damaging plastics derived from petrochemicals. We investigated biopolymer synthesis by the cyanobacterium Spirulina strain LEB 18. Autotrophic culture used unmodified Zarrouk medium or modified Zarrouk medium in which the NaNO3 content was reduced to 0.25 g L−1 and the NaHCO3 content reduced to 8.4 g L−1 or increased to 25.2 g L−1. Heterotrophic culture used modified Zarrouk medium containing 0.25 g L−1 NaNO3 with the NaHCO3 replaced by 0.2 g L−1, 0.4 g L−1, or 0.6 g L−1 of glucose (C6H12O6 or sodium acetate (CH3COONa. Mixotrophic culture used modified Zarrouk medium containing 0.25 g L−1 NaNO3 plus 16.8 g L−1 NaHCO3 with the addition of 0.2 g L−1, 0.4 g L−1, or 0.6 g L−1 of glucose or sodium acetate. The highest biopolymer yield was 44% when LEB 18 was growing autotrophically in media containing 0.25 g L−1 NaNO3 and 8.4 g L−1 NaHCO3.

  10. Rescaling metal molybdate nanostructures with biopolymer for energy storage having high capacitance with robust cycle stability.

    Science.gov (United States)

    Minakshi, Manickam; Barmi, Maryam J; Jones, Robert T

    2017-03-14

    Hybrid capacitors can replace or complement batteries, while storing energy through ion adsorption and fast surface redox reactions. There is a growing demand in developing nanostructured materials as electrodes for hybrid systems that can enhance the specific capacitance by ion desolvation in the nanopores. Here, we demonstrate that rescaling the pore diameter with the aid of biopolymer at an optimal level during the synthesis of metal molybdate leads to high capacitance 124 F g(-1) giving robust capacitance retention of 80% over 2000 cycles for a constructed device (activated carbon vs. metal molybdate). The presence of biopolymer (l-glutamic acid) in the metal molybdate acts as a complexing agent of the metal ion while enhancing the mass transport and hence it's improved electrochemical performance. However, XPS and other elemental analyses illustrated no evidence for N doping but traces of other surface functional groups (i.e. C and O) could be present on the molybdate surface. The biopolymer synthetic approach has the advantage of yielding nanostructured material with a relatively narrow pore size distribution controlled by l-glutamic acid. This study will provide a generic route to rescale other metal molybdate, phosphate or oxide counterparts and be an added value to the database.

  11. Biological effects of Spirulina (Arthrospira) biopolymers and biomass in the development of nanostructured scaffolds.

    Science.gov (United States)

    de Morais, Michele Greque; Vaz, Bruna da Silva; de Morais, Etiele Greque; Costa, Jorge Alberto Vieira

    2014-01-01

    Spirulina is produced from pure cultures of the photosynthetic prokaryotic cyanobacteria Arthrospira. For many years research centers throughout the world have studied its application in various scientific fields, especially in foods and medicine. The biomass produced from Spirulina cultivation contains a variety of biocompounds, including biopeptides, biopolymers, carbohydrates, essential fatty acids, minerals, oligoelements, and sterols. Some of these compounds are bioactive and have anti-inflammatory, antibacterial, antioxidant, and antifungal properties. These compounds can be used in tissue engineering, the interdisciplinary field that combines techniques from cell science, engineering, and materials science and which has grown in importance over the past few decades. Spirulina biomass can be used to produce polyhydroxyalkanoates (PHAs), biopolymers that can substitute synthetic polymers in the construction of engineered extracellular matrices (scaffolds) for use in tissue cultures or bioactive molecule construction. This review describes the development of nanostructured scaffolds based on biopolymers extracted from microalgae and biomass from Spirulina production. These scaffolds have the potential to encourage cell growth while reducing the risk of organ or tissue rejection.

  12. Bioactivity of noble metal nanoparticles decorated with biopolymers and their application in drug delivery.

    Science.gov (United States)

    Rai, Mahendra; Ingle, Avinash P; Gupta, Indarchand; Brandelli, Adriano

    2015-12-30

    The unique properties of nanomaterials can be applied to solve different problems including new ways of drug delivery. Noble metal nanoparticles are most promising because they have been used for medicinal purposes since ancient time. It is evident from the past studies that the metallic nanoparticles are much more effective against various microorganisms when compared to their conventional counterparts. However, decoration of such nanoparticles with biomaterials add more advantages to their antimicrobial activity. Decoration of metal nanoparticles with biopolymers is a quite new area of research. Studies performed hitherto shown that nanoparticles of noble metals like silver, gold and platinum demonstrated better antibacterial, antifungal and antiviral activities when conjugated with biopolymers. The development of such technology has potential to develop materials that are more effective in the field of health science. Considering the importance and uniqueness of this concept, the present review aims to discuss the use of biopolymer-decorated metal nanoparticles for combating various diseases caused by microbial pathogens. Moreover, the nanotoxicity aspect has also been discussed.

  13. Effect of dual substrate environment on the formation of intracellular storage biopolymers.

    Science.gov (United States)

    Ciggin, Asli Seyhan; Majone, Mauro; Orhon, Derin

    2012-01-01

    We investigated the effect of a starch/acetate mixture on the formation of intracellular storage biopolymers compared with system behaviour where these compounds served as a single organic substrate. Three laboratory-scale sequencing batch reactors (SBRs) were operated at steady state with a sludge age of 8 days, one fed with acetate, another with starch and the third with a starch/acetate mixture. The SBR operation involved six cycles per day and continuous feeding during each cycle. Both acetate and starch generated storage biopolymers under continuous feeding. A poly-hydroxybutyrate (PHB) or glycogen pool was formed depending on the selected single substrate. In addition, around 18% of the acetate fed within each cycle was converted to PHB, while the remaining 82% was directly utilized for microbial growth. A higher glycogen formation of 44% was observed for starch. Substrate storage as PHB and glycogen continued with the feeding of the acetate/starch mixture. This observation, supported by microbiological analyses, indicated that the acclimated biomass in the corresponding SBR system sustained microbial fractions capable of performing metabolic functions associated with the formation of the two storage biopolymers. PHB accumulation was reduced as acetate could be more readily used for direct microbial growth in the presence of starch.

  14. The Effects of Biopolymers Composite Based Waste Cooking Oil and Titanium Dioxide Fillers as Superhydrophobic Coatings.

    Science.gov (United States)

    Marsi, N.; Rus, A. Z. M.

    2017-08-01

    This project presents the effect of biopolymer composite surface coating on TiO2 fillers by analysing the static water contact angle, SEM micrographs, porosity, density and refractive index of biopolymer doped with different loading of TiO2. The different ratio loading of 0.5, 1.0, 1.5, 2.0 and 2.5 (wt/wt%) TiO2 can be used to improve the material properties in practical use for outdoor application especially to enhance the stability of surface coating. It is found that the smooth surfaces with a low ratio loading of TiO2 fillers on biopolymer composite surface coating increases the static water contact angle up to 162.29°. It is interpreted with respect to nano- features existing on the surface of the water repellent creates a thin superhydrphobic layer. The relationship between porosity and density is indirectly proportional where the higher the loading of TiO2 filler produce the lower porosity up to 0.86% of the surface coating. The movement from shorter to longer of wavelength was observed before and after exposure indicates that there are optimization of absorption of UV-B radiation as the amount of delocalisation.

  15. Application of Microbial Biopolymers as an Alternative Construction Binder for Earth Buildings in Underdeveloped Countries

    Directory of Open Access Journals (Sweden)

    Ilhan Chang

    2015-01-01

    Full Text Available Earth buildings are still a common type of residence for one-third of the world’s population. However, these buildings are not durable or resistant against earthquakes and floods, and this amplifies their potential harm to humans. Earthen construction without soil binders (e.g., cement is known to result in poor strength and durability performance of earth buildings. Failure to use construction binders is related to the imbalance in binder prices in different countries. In particular, the price of cement in Africa, Middle East, and Southwest Asia countries is extremely high relative to the global trend of consumer goods and accounts for the limited usage of cement in those regions. Moreover, environmental concerns regarding cement usage have recently risen due to high CO2 emissions. Meanwhile, biopolymers have been introduced as an alternative binder for soil strengthening. Previous studies and feasibility attempts in this area show that the mechanical properties (i.e., compressive strength of biopolymer mixed soil blocks (i.e, both 1% xanthan gum and 1% gellan gum satisfied the international criteria for binders used in earthen structures. Economic and market analyses have demonstrated that the biopolymer binder has high potential as a self-sufficient local construction binder for earth buildings where the usage of ordinary cement is restricted.

  16. STUDY OF THE STRUCTURE OF WOOD-RELATED BIOPOLYMERS BY SORPTION METHODS

    Directory of Open Access Journals (Sweden)

    Jelena Chirkova

    2009-08-01

    Full Text Available The potentialities of different vapour sorption methods are analized for the investigation of the microstructure of wood sorbents (wood, cellulose and lignin as a particular case of biopolymers. There are two important distinctions in the sorption behaviour of biopolymers from traditional rigid sorbents, namely, the dependence of the characteristics of the porous structure on the thermodynamic properties of the sorbate, and the manifestation of the sorption hysteresis over the whole region of the sorption–desorption isotherm. The reason for these distinctions is the low rigidity (low values of modulus of elasticity of biopolymers, hence, their considerable deformability under the action of sorption forces, resulting in the cleavage of interstructural bonds. This process, manifesting itself phenomenologically as swelling, depends on the activity of the sorbate and results in the appearance of porosity and a new surface. The criterion for the activity of the sorbate is close values of the solubility parameters of the polymer and the sorbate. Inert substances are adsorbed on the surface of large morphological formations and characterise the intact structure of the sorbent, while active sorbates cause the swelling of these formations and penetrate them, which enables a study of the microstructure of sorbents. In the desorption process, the cleaved bonds are restored, blocking a part of the sorbate in the polymer’s structure, which results in the appearance of sorption hysteresis, not connected directly with the porous structure of the sorbent.

  17. Engineering bacterial biopolymers for the biosorption of heavy metals; new products and novel formulations

    Energy Technology Data Exchange (ETDEWEB)

    Gutnick, D.L.; Bach, H. [Tel-Aviv Univ. (Israel). Dept. of Molecular Microbiology and Biotechnology

    2000-07-01

    Bioremediation of heavy metal pollution remains a major challenge in environmental biotechnology. One of the approaches considered for application involves biosorption either to biomass or to isolated biopolymers. Many bacterial polysaccharides have been shown to bind heavy metals with varying degrees of specificity and affinity. While various approaches have been adopted to generate polysaccharide variants altered in both structure and activity, metal biosorption has not been examined. Polymer engineering has included structural modification through the introduction of heterologous genes of the biosynthetic pathway into specific mutants, leading either to alterations in polysaccharide backbone or side chains, or to sugar modification. In addition, novel formulations can be designed which enlarge the family of available bacterial biopolymers for metal-binding and subsequent recovery. An example discussed here is the use of amphipathic bioemulsifiers such as emulsan, produced by the oil-degrading Acinetobacter lwoffii RAG-1, that forms stable, concentrated (70%), oil-in-water emulsions (emulsanosols). In this system metal ions bind primarily at the oil/water interface, enabling their recovery and concentration from relatively dilute solutions. In addition to the genetic modifications described above, a new approach to the generation of amphipathic bioemulsifying formulations is based on the interaction of native or recombinant esterase and its derivatives with emulsan and other water-soluble biopolymers. Cation-binding emulsions are generated from a variety of hydrophobic substrates. The features of these and other systems will be discussed, together with a brief consideratiton of possible applications. (orig.)

  18. Production of biopolymers from carbon dioxide. Tansan gas kara no bio polymer no seisan

    Energy Technology Data Exchange (ETDEWEB)

    Ishizaki, A. (Kyushu University, Fukuoka (Japan). Faculty of Agriculture)

    1993-11-01

    This paper describes biopolymers made from CO2 that contribute to global preservation. PHB that is generated in the processes of CO2 fermentation and protein production from microorganisms draws attention as a useful biopolymer. Biological synthesis requires energy to synthesize the composing materials therein. Organisms are divided into the independent type and the subordinate type depending on how the energy is acquired. The independent type organism is of CO2 self-reducing type, so to speak, and produces organic matters. When hydrogen oxidizing bacteria, A. eutrophus, is cultured under an independent nutrient condition, energy derived from the hydrogen oxidation proliferates the bacteria and produces PHB. However, this fermentation method has a substantially different difficulty. It requires a huge reactor with a large gas migration capacity coefficient, on which the PHB production depends entirely. Other CO2 biopolymer production methods under study include effective utilization of biomass during photosynthetic processes by using plants incorporated with PHB biosynthesized genes, and production of polylactic acid, a biodegradable polymer. 9 refs., 3 figs.

  19. Milliscale Self-Integration of Megamolecule Biopolymers on a Drying Gas-Aqueous Liquid Crystalline Interface.

    Science.gov (United States)

    Okeyoshi, Kosuke; Okajima, Maiko K; Kaneko, Tatsuo

    2016-06-13

    A drying environment is always a proposition faced by dynamic living organisms using water, which are driven by biopolymer-based micro- and macrostructures. Here, we introduce a drying process for aqueous liquid crystalline (LC) solutions composed of biopolymer with extremely high molecular weight components such as polysaccharides, cytoskeletal proteins, and DNA. On controlling the mobility of the LC microdomain, the solutions showed milliscale self-integration starting from the unstable gas-LC interface during drying. In particular, we first identified giant rod-like microdomains (∼1 μm diameter and more than 20 μm length) of the mega-molecular polysaccharide, sacran, which is remarkably larger than other polysaccharides. These microdomains led to the formation of a single milliscale macrodomain on the interface. In addition, the dried polymer films on a solid substrate also revealed that such integration depends on the size of the microdomain. We envision that this simple drying method will be useful not only for understanding the biopolymer hierarchization at the macroscale level but also for preparation of surfaces with direction controllability, as seen in living organisms, for use in various fields such as diffusion, mechanics, and photonics.

  20. Biological Effects of Spirulina (Arthrospira) Biopolymers and Biomass in the Development of Nanostructured Scaffolds

    Science.gov (United States)

    de Morais, Michele Greque; Vaz, Bruna da Silva; de Morais, Etiele Greque; Costa, Jorge Alberto Vieira

    2014-01-01

    Spirulina is produced from pure cultures of the photosynthetic prokaryotic cyanobacteria Arthrospira. For many years research centers throughout the world have studied its application in various scientific fields, especially in foods and medicine. The biomass produced from Spirulina cultivation contains a variety of biocompounds, including biopeptides, biopolymers, carbohydrates, essential fatty acids, minerals, oligoelements, and sterols. Some of these compounds are bioactive and have anti-inflammatory, antibacterial, antioxidant, and antifungal properties. These compounds can be used in tissue engineering, the interdisciplinary field that combines techniques from cell science, engineering, and materials science and which has grown in importance over the past few decades. Spirulina biomass can be used to produce polyhydroxyalkanoates (PHAs), biopolymers that can substitute synthetic polymers in the construction of engineered extracellular matrices (scaffolds) for use in tissue cultures or bioactive molecule construction. This review describes the development of nanostructured scaffolds based on biopolymers extracted from microalgae and biomass from Spirulina production. These scaffolds have the potential to encourage cell growth while reducing the risk of organ or tissue rejection. PMID:25157367

  1. Nanoencapsulation of the Bioactive Compounds of Spirulina with a Microalgal Biopolymer Coating.

    Science.gov (United States)

    Greque de Morais, Michele; Greque de Morais, Etiele; Vaz, Bruna da Silva; Gonçalves, Carolina Ferrer; Lisboa, Cristiane; Costa, Jorge Alberto Vieira

    2016-01-01

    Microalgae have been studied in biotechnological processes due to the various biocompounds that can be obtained from their biomasses, including pigments, proteins, antioxidants, biopeptides, fatty acids and biopolymers. Microalgae biopolymers are biodegradable materials that present similar characteristics to traditional polymers, with the advantage of being rapidly degraded when discarded. In addition, nanoencapsulation is capable of increasing the availability of bioactive compounds by allowing the release of these biocompounds to occur slowly over time. The use of polymers in the nanoencapsulation of active ingredients can mask the undesired physicochemical properties of the compounds to be encapsulated, thereby enhancing consumer acceptability. This covering also acts as a barrier against several foreign substances that can react with bioactive compounds and reduce their activity. Studies of the development of poly-3-hydroxybutyrate (PHB) nanocapsules from microbial sources are little explored; this review addresses the use of nanotechnology to obtain bioactive compounds coated with biopolymer nanocapsules, both obtained from Spirulina biomasses. These microalgae are Generally Recognized as Safe (GRAS) certified, which guarantees that the biomass can be used to obtain high added value biocompounds, which can be used in human and animal supplementation.

  2. Biological Effects of Spirulina (Arthrospira Biopolymers and Biomass in the Development of Nanostructured Scaffolds

    Directory of Open Access Journals (Sweden)

    Michele Greque de Morais

    2014-01-01

    Full Text Available Spirulina is produced from pure cultures of the photosynthetic prokaryotic cyanobacteria Arthrospira. For many years research centers throughout the world have studied its application in various scientific fields, especially in foods and medicine. The biomass produced from Spirulina cultivation contains a variety of biocompounds, including biopeptides, biopolymers, carbohydrates, essential fatty acids, minerals, oligoelements, and sterols. Some of these compounds are bioactive and have anti-inflammatory, antibacterial, antioxidant, and antifungal properties. These compounds can be used in tissue engineering, the interdisciplinary field that combines techniques from cell science, engineering, and materials science and which has grown in importance over the past few decades. Spirulina biomass can be used to produce polyhydroxyalkanoates (PHAs, biopolymers that can substitute synthetic polymers in the construction of engineered extracellular matrices (scaffolds for use in tissue cultures or bioactive molecule construction. This review describes the development of nanostructured scaffolds based on biopolymers extracted from microalgae and biomass from Spirulina production. These scaffolds have the potential to encourage cell growth while reducing the risk of organ or tissue rejection.

  3. Biopolymer from microbial assisted in situ hydrolysis of triglycerides and dimerization of fatty acids.

    Science.gov (United States)

    Kavitha, V; Radhakrishnan, N; Madhavacharyulu, E; Sailakshmi, G; Sekaran, G; Reddy, B S R; Rajkumar, G Suseela; Gnanamani, Arumugam

    2010-01-01

    The present study demonstrates biopolymer production by in situ bio-based dimerization of fatty acids by microorganism isolated from marine sediments. Microbial isolate grown in Zobell medium in the presence of triglycerides for the period of 24-240 h at 37 degrees C, hydrolyze the applied triglycerides and sequentially dimerized the hydrolyzed products and subsequently polymerized and transformed to a biopolymer having appreciable adhesive properties. Physical (nature, odour, stickyness and tensile strength), chemical (instrumentation) and biochemical (cell free broth) methods of analyses carried out provided the hypotheses involved in the formation of the product as well as the nature of the product formed. Results revealed, lipolytic enzymes released during initial period of growth and the biosurfactant production during later period, respectively, hydrolyze the applied triglycerides and initiate the dimerization and further accelerated when the incubation period extended. The existence and the non-existence of in situ hydrolysis of various triglycerides followed by dimerization and polymerization and the mechanism of transformation of triglycerides to biopolymer are discussed in detail.

  4. Biopolymers coated superparamagnetic Nickel Ferrites: Enhanced biocompatibility and MR imaging probe for breast cancer

    Science.gov (United States)

    Bano, Shazia; Zafar, Tayyaba; Akhtar, Shahnaz; Buzdar, Saeed Ahmed; Waraich, Mustansar Mahmood; Afzal, Muhammad

    2016-11-01

    We report evidence for the promising application of bovine serum albumin (BSA), chitosan (CS) or carboxymethyl cellulose (CMC) coated NiFe2O4 cores for improved biocompatibility and enhanced T2 relaxivity, through a single combinatorial approach. Pure nickel-ferrite nano cores (NFs) successfully synthesized by thermolysis, were immobilize with BSA, CS or CMC layer employing a simple cross linking procedure to avoid any significant influence of these biopolymers on the morphology and crystal structure of the cores. Phase, morphology, magnetic hysteresis and surface chemistry were characterized by X-ray diffraction (XRD), Field emission scanning electron microscopy (FE-SEM), vibrating sample magnetometer (VSM) and Fourier transform infrared (FTIR) spectroscopy. The preliminary haemolysis and cell viability experiments show that biopolymers conjugation mitigates the haemolytic effect of the NFs on erythrocytes as the haemolytic index is less than 2% and cell viability is up to 100%, when normalized with the nontreated cells. The relaxivity value of coated NFs is 351±2.6 when compared to 84±0.22 of NFs without biopolymer conjugation. The results demonstrate that BSA, CS or CMC covering on NFs provide a single combinatorial approach to improve the biocompatibility and enhance the relaxivity value. Thus addressing the current challenge of the same with very good contrast for targeting MCF-7 without any further vectorization.

  5. A biopolymer-like metal enabled hybrid material with exceptional mechanical prowess

    Science.gov (United States)

    Zhang, Junsong; Cui, Lishan; Jiang, Daqiang; Liu, Yinong; Hao, Shijie; Ren, Yang; Han, Xiaodong; Liu, Zhenyang; Wang, Yunzhi; Yu, Cun; Huan, Yong; Zhao, Xinqing; Zheng, Yanjun; Xu, Huibin; Ren, Xiaobing; Li, Xiaodong

    2015-02-01

    The design principles for naturally occurring biological materials have inspired us to develop next-generation engineering materials with remarkable performance. Nacre, commonly referred to as nature's armor, is renowned for its unusual combination of strength and toughness. Nature's wisdom in nacre resides in its elaborate structural design and the judicious placement of a unique organic biopolymer with intelligent deformation features. However, up to now, it is still a challenge to transcribe the biopolymer's deformation attributes into a stronger substitute in the design of new materials. In this study, we propose a new design strategy that employs shape memory alloy to transcribe the ``J-curve'' mechanical response and uniform molecular/atomic level deformation of the organic biopolymer in the design of high-performance hybrid materials. This design strategy is verified in a TiNi-Ti3Sn model material system. The model material demonstrates an exceptional combination of mechanical properties that are superior to other high-performance metal-based lamellar composites known to date. Our design strategy creates new opportunities for the development of high-performance bio-inspired materials.

  6. Biopolymers as materials for developing products in pharmaceutical applications and biomedical uses

    Directory of Open Access Journals (Sweden)

    Manuel Guillermo Rojas Cortés

    2010-04-01

    Full Text Available Biopolymers have been widely studied for use in pharmaceutical applications. They have been used for modifying drug release, orientating a drug towards its therapeutic target, penetrating physiological barriers (tissues and cells and protecting unstable therapeutic agents against physiological conditions which are present in a less invasive administration routes. The importance of biopolymers in designing new biomedical devices must thus be stressed, es-pecially when a pharmaceutical substance must be incorporated into a polymer matrix. A new generation of alterna-tives for human health has thus been generated by designing pharmaceutical therapeutic systems in line with the concept of “integrated custom-made product design”. This document reviews the trends concerning using biopoly-mers for designing products having pharmaceutical and biomedical applications. The paper also introduces the elements which should be mastered by engineers for obtaining material which can be used in the health field and tries to provide a reference point regarding the state of the art in this specific field of knowledge.

  7. General solution of cyclic Leibniz rule

    CERN Document Server

    Kadoh, Daisuke

    2015-01-01

    We study the general solution of the cyclic Leibniz rule (CLR) which was recently proposed as a new approach to the lattice supersymmetry. Introducing some mathematical preliminaries associated with the cyclic symmetry, we find the general solution of the 2-body CLR for the naive symmetric difference operator. The main theorems of this paper state that the general solution can be uniquely expressed as (A) a linear combination of the two fundamental solutions with cyclic invariant coefficients, and (B) a linear combination of the minimal solutions with complex coefficients. Moreover, an extension to the general difference operators is also discussed.

  8. Monopod bucket foundations under cyclic lateral loading

    OpenAIRE

    Foglia, Aligi; Ibsen, Lars Bo

    2014-01-01

    The monopod bucket foundation can be a cost-reducing sub-structure for offshore wind turbines. To avoid problems during the turbine operation, the long-term effect of cyclic loading must be considered in the design of the foundation. In this paper a 1g testing rig is adopted to extend the knowledge on bucket foundations under lateral cyclic loading. The test setup is described in detail and a comprehensive experimental campaign is presented. The foundation is subjected to cyclic overturning m...

  9. Cyclic Control Optimization for a Smart Rotor

    DEFF Research Database (Denmark)

    Bergami, Leonardo; Henriksen, Lars Christian

    2012-01-01

    The paper presents a method to determine cyclic control trajectories for a smart rotor undergoing periodic-deterministic load variations. The control trajectories result from a constrained optimization problem, where the cost function to minimize is given by the variation of the blade root flapwise...... bending moment within a rotor revolution. The method is applied to a rotor equipped with trailing edge flaps, and capable of individual blade pitching. Results show that the optimized cyclic control significantly alleviates the load variations from periodic disturbances; the combination of both cyclic...

  10. Biologically relevant mono- and di-nuclear manganese II/III/IV complexes of mononegative pentadentate ligands

    DEFF Research Database (Denmark)

    Baffert, Carole; Collomb, Marie-Nöelle; Deronzier, Alain

    2003-01-01

    were characterised by UV-visible spectroscopy, ESI mass spectrometry and cyclic voltammetry. In addition, III-IV and II-III species were electrochemically generated. Thus the new mononegative pentadentate ligand systems display significant flexibility in the range of Mn oxidation states and species...

  11. Molecular level characterization of diatom‐associated biopolymers that bind 234Th, 233Pa, 210Pb, and 7Be in seawater: A case study with Phaeodactylum tricornutum

    National Research Council Canada - National Science Library

    Chuang, Chia‐Ying; Santschi, Peter H; Xu, Chen; Jiang, Yuelu; Ho, Yi‐Fang; Quigg, Antonietta; Guo, Laodong; Hatcher, Patrick G; Ayranov, Marin; Schumann, Dorothea

    2015-01-01

    In order to investigate the importance of biogenic silica associated biopolymers on the scavenging of radionuclides, the diatom Phaeodactylum tricornutum was incubated together with the radionuclides...

  12. A further insight into the biosorption mechanism of Pt(IV by infrared spectrometry

    Directory of Open Access Journals (Sweden)

    Xu Zhenling

    2009-07-01

    Full Text Available Abstract Background Platinum nanomaterial is one of the significant noble metal catalysts, and the interaction of platinum with microbe is one of the key factors in influencing the size and the distribution of the platinum nanoparticles on the microbial biomass. Some properties of Pt(IV adsorption and reduction by resting cells of Bacillus megatherium D01 biomass have once been investigated, still the mechanism active in the platinum biosorption remains to be seen and requires further elucidating. Result A further insight into the biosorption mechanism of Pt(IV onto resting cells of Bacillus megatherium D02 biomass on a molecular level has been obtained. The image of scanning electron microscopy (SEM of the D02 biomass challenged with Pt(IV displayed a clear distribution of bioreduced platinum particles with sizes of nanometer scale on the biomass. The state of Pt(IV bioreduced to elemental Pt(0 examined via X-ray photoelectron spectroscopy (XPS suggested that the biomass reduces the Pt(IV to Pt(II followed by a slower reduction to Pt(0. The analysis of glucose content in the hydrolysates of D02 biomass for different time intervals using ultraviolet-visible (UV-vis spectrophotometry indicated that certain reducing sugars occur in the hydrolyzed biomass and that the hydrolysis of polysaccharides of the biomass is a rapid process. The infrared (IR spectrometry on D02 biomass and that challenged with Pt(IV, and on glucose and that reacted with Pt(IV demonstrated that the interaction of the biomass with Pt(IV seems to be through oxygenous or nitrogenous chemical functional groups on the cell wall biopolymers; that the potential binding sites for Pt species include hydroxyl of saccharides, carboxylate anion and carboxyl of amino acid residues, peptide bond, etc.; and that the free monosaccharic group bearing hemiacetalic hydroxyl from the hydrolyzed biomass behaving as an electron donor, in situ reduces the Pt(IV to Pt(0. And moreover, the binding of

  13. Mortar constituent of concrete under cyclic compression

    Science.gov (United States)

    Maher, A.; Darwin, D.

    1980-10-01

    The behavior of the mortar constituent of concrete under cyclic compression was studied and a simple analytic model was developed to represent its cyclic behavior. Experimental work consisted of monotonic and cyclic compressive loading of mortar. Two mixes were used, with proportions corresponding to concretes having water cement ratios of 0.5 and 0.6. Forty-four groups of specimens were tested at ages ranging from 5 to 70 days. complete monotonic and cyclic stress strain envelopes were obtained. A number of loading regimes were investigated, including cycles to a constant maximum strain. Major emphasis was placed on tests using relatively high stress cycles. Degradation was shown to be a continuous process and a function of both total strain and load history. No stability or fatigue limit was apparent.

  14. Genetics Home Reference: mucopolysaccharidosis type IV

    Science.gov (United States)

    ... Mucopolysaccharidosis type IV (MPS IV), also known as Morquio syndrome, is a progressive condition that mainly affects ... Management Genetic Testing (3 links) Genetic Testing Registry: Morquio syndrome Genetic Testing Registry: Mucopolysaccharidosis, MPS-IV-A ...

  15. The Permutation Groups and the Equivalence of Cyclic and Quasi-Cyclic Codes

    CERN Document Server

    Guenda, Kenza

    2010-01-01

    We give the class of finite groups which arise as the permutation groups of cyclic codes over finite fields. Furthermore, we extend the results of Brand and Huffman et al. and we find the properties of the set of permutations by which two cyclic codes of length p^r can be equivalent. We also find the set of permutations by which two quasi-cyclic codes can be equivalent.

  16. Cyclic Voltammetry And Linear Sweep Voltammetry Study Of Cyclic Tertiary Amines

    Institute of Scientific and Technical Information of China (English)

    ZHAO Ping; TIAN JinPing; YIN YingWu

    2001-01-01

    @@ Cyclic six membered a-aminonitrile have proved to be very versatile synthetic intermediates and have been widely used in the construction of a large number of indole alkaloids. In order to obtain some information about the mechanisn of electrochemical synthesis of aaminonitrile. Electrochemistry behaviors that include cyclic voltammetry and linear sweep voltammetry of cyclic tertiary amines which including N-benzylpiperidine (NBP), 1-(l-Methoxycarbonyl ethyl) piperidine (MCEP), N-methylcarbonylppiperidine (NMCP), Nethylpiperidine(NEP) was studied.

  17. Cyclic Voltammetry And Linear Sweep Voltammetry Study Of Cyclic Tertiary Amines

    Institute of Scientific and Technical Information of China (English)

    ZHAO; Ping

    2001-01-01

    Cyclic six membered a-aminonitrile have proved to be very versatile synthetic intermediates and have been widely used in the construction of a large number of indole alkaloids. In order to obtain some information about the mechanisn of electrochemical synthesis of aaminonitrile. Electrochemistry behaviors that include cyclic voltammetry and linear sweep voltammetry of cyclic tertiary amines which including N-benzylpiperidine (NBP), 1-(l-Methoxycarbonyl ethyl) piperidine (MCEP), N-methylcarbonylppiperidine (NMCP), Nethylpiperidine(NEP) was studied.……

  18. Cyclic Oxonitriles: Stereodivergent Grignard Addition-Alkylations

    OpenAIRE

    Fleming, Fraser F.; Wei, Guoqing; Zhang, Zhiyu; Steward, Omar W.

    2007-01-01

    Sequential carbonyl addition-conjugate addition of Grignard reagents to cyclic 5–7–membered oxoalkenenitriles efficiently generates cyclic magnesiated nitriles. Alkylations of these magnesiated nitriles exhibit diastereoselectivities that depend intimately on the size of the carbocyclic ring: 5-membered oxonitriles generate magnesiated nitriles whose alkylations are controlled by steric constraints whereas 6- and 7-membered oxonitriles generate internally coordinated, C-magnesiated nitriles w...

  19. Total synthesis of cyclic heptapeptide euryjanicin B

    Institute of Scientific and Technical Information of China (English)

    Chun Mei Zhang; Jun Xiang Guo; Liang Wang; Xiao Yun Chai; Hong Gang Hu; Qiu Ye Wu

    2011-01-01

    The first synthesis of the naturally occurring cyclic peptide euryjanicin B has been achieved. A general method was described to synthesize the cyclic peptide by a two-step solid-phase/solution synthesis strategy. All the amino acids in this study are L-configuration, The linear heptapeptide was assembled by standard Fmoc chemistry on solid-phase and subsequently cyclization was carried out by solution method.

  20. Cyclic Period in the CBE Model

    CERN Document Server

    Frampton, Paul H

    2016-01-01

    In a cyclic entropy model in which the extroverse is jettisoned at turnaround with a Come Back Empty (CBE) assumption, we address matching of the contaction scale factor $\\hat{a}(t)=f(t_T){a}(t)$ to the expansion scale factor $a(t)$, where $f(t_T)$ is the ratio at turnaround of the introverse to extroverse radii. Such matching is necessary for infinite cyclicity and fixes the CBE period at $\\sim 2.6Ty$.

  1. Synthesis of Chiral Amino Cyclic Phosphoric Acids

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Chirai amino cyclic phosphoric acids, 5-amino-2-hydroxy-4- (4-nitrophenyl)-l, 3,2-dioxaphospho- rinane 2-oxide and 2-hydroxy-4- (4-methylsulfonylphenyl)-5-phthalimido-1,3,2-dioxaphos phorinane 2-oxide are synthesized in good over yields (64. 2% and 72. 8% respectively) from 2-amino-l-aryl-l,3-propanediols. The different reaction conditions are necessary in hydrolysis reactions of amino cyclic phosphonyl chlorides.

  2. Antimicrobial cyclic peptides for plant disease control.

    Science.gov (United States)

    Lee, Dong Wan; Kim, Beom Seok

    2015-03-01

    Antimicrobial cyclic peptides derived from microbes bind stably with target sites, have a tolerance to hydrolysis by proteases, and a favorable degradability under field conditions, which make them an attractive proposition for use as agricultural fungicides. Antimicrobial cyclic peptides are classified according to the types of bonds within the ring structure; homodetic, heterodetic, and complex cyclic peptides, which in turn reflect diverse physicochemical features. Most antimicrobial cyclic peptides affect the integrity of the cell envelope. This is achieved through direct interaction with the cell membrane or disturbance of the cell wall and membrane component biosynthesis such as chitin, glucan, and sphingolipid. These are specific and selective targets providing reliable activity and safety for non-target organisms. Synthetic cyclic peptides produced through combinatorial chemistry offer an alternative approach to develop antimicrobials for agricultural uses. Those synthesized so far have been studied for antibacterial activity, however, the recent advancements in powerful technologies now promise to provide novel antimicrobial cyclic peptides that are yet to be discovered from natural resources.

  3. Antimicrobial Cyclic Peptides for Plant Disease Control

    Directory of Open Access Journals (Sweden)

    Dong Wan Lee

    2015-03-01

    Full Text Available Antimicrobial cyclic peptides derived from microbes bind stably with target sites, have a tolerance to hydrolysis by proteases, and a favorable degradability under field conditions, which make them an attractive proposition for use as agricultural fungicides. Antimicrobial cyclic peptides are classified according to the types of bonds within the ring structure; homodetic, heterodetic, and complex cyclic peptides, which in turn reflect diverse physicochemical features. Most antimicrobial cyclic peptides affect the integrity of the cell envelope. This is achieved through direct interaction with the cell membrane or disturbance of the cell wall and membrane component biosynthesis such as chitin, glucan, and sphingolipid. These are specific and selective targets providing reliable activity and safety for non-target organisms. Synthetic cyclic peptides produced through combinatorial chemistry offer an alternative approach to develop antimicrobials for agricultural uses. Those synthesized so far have been studied for antibacterial activity, however, the recent advancements in powerful technologies now promise to provide novel antimicrobial cyclic peptides that are yet to be discovered from natural resources.

  4. Cyclic behaviors of amorphous shape memory polymers.

    Science.gov (United States)

    Yu, Kai; Li, Hao; McClung, Amber J W; Tandon, Gyaneshwar P; Baur, Jeffery W; Qi, H Jerry

    2016-04-01

    Cyclic loading conditions are commonly encountered in the applications of shape memory polymers (SMPs), where the cyclic characteristics of the materials determine their performance during the service life, such as deformation resistance, shape recovery speed and shape recovery ratio. Recent studies indicate that in addition to the physical damage or some other irreversible softening effects, the viscoelastic nature could also be another possible reason for the degraded cyclic behavior of SMPs. In this paper, we explore in detail the influence of the viscoelastic properties on the cyclic tension and shape memory (SM) behavior of an epoxy based amorphous thermosetting polymer. Cyclic experiments were conducted first, which show that although the epoxy material does not have any visible damage or irreversible softening effect during deformation, it still exhibits obvious degradation in the cyclic tension and SM behaviors. A linear multi-branched model is utilized to assist in the prediction and understanding of the mechanical responses of amorphous SMPs. Parametric studies based on the applied model suggest that the shape memory performance can be improved by adjusting programming and recovery conditions, such as lowering the loading rate, increasing the programming temperature, and reducing the holding time.

  5. The evolution of Momordica cyclic peptides.

    Science.gov (United States)

    Mahatmanto, Tunjung; Mylne, Joshua S; Poth, Aaron G; Swedberg, Joakim E; Kaas, Quentin; Schaefer, Hanno; Craik, David J

    2015-02-01

    Cyclic proteins have evolved for millions of years across all kingdoms of life to confer structural stability over their acyclic counterparts while maintaining intrinsic functional properties. Here, we show that cyclic miniproteins (or peptides) from Momordica (Cucurbitaceae) seeds evolved in species that diverged from an African ancestor around 19 Ma. The ability to achieve head-to-tail cyclization of Momordica cyclic peptides appears to have been acquired through a series of mutations in their acyclic precursor coding sequences following recent and independent gene expansion event(s). Evolutionary analysis of Momordica cyclic peptides reveals sites that are under selection, highlighting residues that are presumably constrained for maintaining their function as potent trypsin inhibitors. Molecular dynamics of Momordica cyclic peptides in complex with trypsin reveals site-specific residues involved in target binding. In a broader context, this study provides a basis for selecting Momordica species to further investigate the biosynthesis of the cyclic peptides and for constructing libraries that may be screened against evolutionarily related serine proteases implicated in human diseases. © The Author 2014. Published by Oxford University Press on behalf of the Society for Molecular Biology and Evolution. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  6. Some Structure Properties of the Cyclic Fuzzy Group Family

    Institute of Scientific and Technical Information of China (English)

    Hacl Akta(s); Naim (C)a(g)man

    2005-01-01

    In crisp environment, the notion of cyclic group on a set is well known. We study an extension of this classical notion to the fuzzy sets to define the concept of cyclic fuzzy subgroups. By using these cyclic fuzzy subgroups, we then define a cyclic fuzzy group family and investigate its structure properties.

  7. MICROBIAL FERMENTATION OF ABUNDANT BIOPOLYMERS: CELLULOSE AND CHITIN

    Energy Technology Data Exchange (ETDEWEB)

    Leschine, Susan

    2009-10-31

    Our research has dealt with seven major areas of investigation: i) characterization of cellulolytic members of microbial consortia, with special attention recently given to Clostridium phytofermentans, a bacterium that decomposes cellulose and produces uncommonly large amounts of ethanol, ii) investigations of the chitinase system of Cellulomonas uda; including the purification and characterization of ChiA, the major component of this enzyme system, iii) molecular cloning, sequence and structural analysis of the gene that encodes ChiA in C. uda, iv) biofilm formation by C. uda on nutritive surfaces, v) investigations of the effects of humic substances on cellulose degradation by anaerobic cellulolytic microbes, vi) studies of nitrogen metabolism in cellulolytic anaerobes, and vii) understanding the molecular architecture of the multicomplex cellulase-xylanase system of Clostridium papyrosolvens. Also, progress toward completing the research of more recent projects is briefly summarized. Major accomplishments include: 1. Characterization of Clostridium phytofermentans, a cellulose-fermenting, ethanol-producing bacterium from forest soil. The characterization of a new cellulolytic species isolated from a cellulose-decomposing microbial consortium from forest soil was completed. This bacterium is remarkable for the high concentrations of ethanol produced during cellulose fermentation, typically more than twice the concentration produced by other species of cellulolytic clostridia. 2. Examination of the use of chitin as a source of carbon and nitrogen by cellulolytic microbes. We discovered that many cellulolytic anaerobes and facultative aerobes are able to use chitin as a source of both carbon and nitrogen. This major discovery expands our understanding of the biology of cellulose-fermenting bacteria and may lead to new applications for these microbes. 3. Comparative studies of the cellulase and chitinase systems of Cellulomonas uda. Results of these studies indicate

  8. MICROBIAL FERMENTATION OF ABUNDANT BIOPOLYMERS: CELLULOSE AND CHITIN

    Energy Technology Data Exchange (ETDEWEB)

    Leschine, Susan

    2009-10-31

    Our research has dealt with seven major areas of investigation: i) characterization of cellulolytic members of microbial consortia, with special attention recently given to Clostridium phytofermentans, a bacterium that decomposes cellulose and produces uncommonly large amounts of ethanol, ii) investigations of the chitinase system of Cellulomonas uda; including the purification and characterization of ChiA, the major component of this enzyme system, iii) molecular cloning, sequence and structural analysis of the gene that encodes ChiA in C. uda, iv) biofilm formation by C. uda on nutritive surfaces, v) investigations of the effects of humic substances on cellulose degradation by anaerobic cellulolytic microbes, vi) studies of nitrogen metabolism in cellulolytic anaerobes, and vii) understanding the molecular architecture of the multicomplex cellulase-xylanase system of Clostridium papyrosolvens. Also, progress toward completing the research of more recent projects is briefly summarized. Major accomplishments include: 1. Characterization of Clostridium phytofermentans, a cellulose-fermenting, ethanol-producing bacterium from forest soil. The characterization of a new cellulolytic species isolated from a cellulose-decomposing microbial consortium from forest soil was completed. This bacterium is remarkable for the high concentrations of ethanol produced during cellulose fermentation, typically more than twice the concentration produced by other species of cellulolytic clostridia. 2. Examination of the use of chitin as a source of carbon and nitrogen by cellulolytic microbes. We discovered that many cellulolytic anaerobes and facultative aerobes are able to use chitin as a source of both carbon and nitrogen. This major discovery expands our understanding of the biology of cellulose-fermenting bacteria and may lead to new applications for these microbes. 3. Comparative studies of the cellulase and chitinase systems of Cellulomonas uda. Results of these studies indicate

  9. Toward 3D graphene oxide gels based adsorbents for high-efficient water treatment via the promotion of biopolymers.

    Science.gov (United States)

    Cheng, Chong Sage; Deng, Jie; Lei, Bei; He, Ai; Zhang, Xiang; Ma, Lang; Li, Shuang; Zhao, Changsheng

    2013-12-15

    Recent studies showed that graphene oxide (GO) presented high adsorption capacities to various water contaminants. However, the needed centrifugation after adsorption and the potential biological toxicity of GO restricted its applications in wastewater treatment. In this study, a facile method is provided by using biopolymers to mediate and synthesize 3D GO based gels. The obtained hybrid gels present well-defined and interconnected 3D porous network, which allows the adsorbate molecules to diffuse easily into the adsorbent. The adsorption experiments indicate that the obtained porous GO-biopolymer gels can efficiently remove cationic dyes and heavy metal ions from wastewater. Methylene blue (MB) and methyl violet (MV), two cationic dyes, are chosen as model adsorbates to investigate the adsorption capability and desorption ratio; meanwhile, the influence of contacting time, initial concentration, and pH value on the adsorption capacity of the prepared GO-biopolymer gels are also studied. The GO-biopolymer gels displayed an adsorption capacity as high as 1100 mg/g for MB dye and 1350 mg/g for MV dye, respectively. Furthermore, the adsorption kinetics and isotherms of the MB were studied in details. The experimental data of MB adsorption fitted well with the pseudo-second-order kinetic model and the Langmuir isotherm, and the results indicated that the adsorption process was controlled by the intraparticle diffusion. Moreover, the adsorption data revealed that the porous GO-biopolymer gels showed good selective adsorbability to cationic dyes and metal ions.

  10. ''Green'' Biopolymers for Improved Decontamination of Metals from Surfaces: Sorptive Characterization and Coating Properties

    Energy Technology Data Exchange (ETDEWEB)

    Davison, Brian H.; Kuritz, Tanya

    2000-06-01

    The proposed research aims to develop a fundamental understanding of important biological and physical chemical parameters for effective decontamination of metal surfaces using environmentally benign aqueous-based biopolymer solutions. Understanding how heavy metal-chelating biopolymers coat and interact with contaminated surfaces will benefit the development of novel, safe, easy-to-apply decontamination methodologies for removal of radionuclides and heavy metals. The benefits of these methodologies will include the following: (1) decreased exposure hazards for workers; (2) decreased secondary waste generation; (3) increased efficiency of decontamination; (4) positive public appeal and development of novel, nature-friendly business opportunities; and (5) lower cost of cleanup to the government. We propose to use aqueous biopolymer solutions to coat a contaminated metal surface (i.e., steel), solubilize the heavy metals (e.g., uranium) from the surface, and bind the heavy metals into the biopolymer. The biopolymer coating (containing the immobilized hazardous metal contaminants) will then be removed as a viscous film, as a dry powder, or by washing. This ''apply, wait, and remove'' procedure will reduce the amount of worker time spent in decontamination activities.

  11. ''Green'' Biopolymers for Improved Decontamination of Metals from Surfaces: Sorptive Characterization and Coating Properties

    Energy Technology Data Exchange (ETDEWEB)

    Davison, Brian H.; Kurtiz,Tanya

    1999-06-01

    The proposed research aims to develop a fundamental understanding of important biological and physical chemical parameters for effective decontamination of metal surfaces using environmentally benign aqueous-based biopolymer solutions. Understanding how heavy metal-chelating biopolymers coat and interact with contaminated surfaces will benefit the development of novel, safe, easy-to-apply decontamination methodologies for removal of radionuclides and heavy metals. The benefits of these methodologies will include the following: (1) decreased exposure hazards for workers; (2) decreased secondary waste generation; (3) increased efficiency of decontamination; (4) positive public appeal and development of novel, nature-friendly business opportunities; and (5) lower cost of cleanup to the government. We propose to use aqueous biopolymer solutions to coat a contaminated metal surface (i.e., steel), solubilize the heavy metals (e.g., uranium) from the surface, and bind the heavy metals into the biopolymer. The biopolymer coating (containing the immobilized hazardous metal contaminants) will then be removed as a viscous film, as a dry powder, or by washing. This ''apply, wait, and remove'' procedure will reduce the amount of worker time spent in decontamination activities.

  12. ''Green'' Biopolymers for Improved Decontamination of Metals from Surfaces: Sorptive Characterization and Coating Properties

    Energy Technology Data Exchange (ETDEWEB)

    Davison, Brian H.

    2002-04-30

    The proposed research aimed to develop a fundamental understanding of important biological and physical chemical parameters for effective decontamination of metal surfaces using environmentally benign aqueous-based biopolymer solutions. Understanding how heavy metal-chelating biopolymers coat and interact with contaminated surfaces will benefit the development of novel, safe, easy-to-apply decontamination methodologies for removal of radionuclides and heavy metals. The benefits of these methodologies include the following: decreased exposure hazards for workers; decreased secondary waste generation; increased efficiency of decontamination; positive public appeal and development of novel, nature-friendly business opportunities; and lower cost of cleanup to the government. We proposed to use aqueous biopolymer solutions to coat a contaminated metal surface (i.e., steel), solubilize the heavy metals (e.g., uranium) from the surface, and bind the heavy metals into the biopolymer. The biopolymer coating (containing the immobilized hazardous metal contaminants) was to be removed as a viscous film, as a dry powder, or by washing. This ''apply, wait, and remove'' procedure will reduce the amount of worker time spent in decontamination activities.

  13. Monitoramento tecnológico e mercadológico de biopolímeros Biopolymers' technology and market monitoring

    Directory of Open Access Journals (Sweden)

    Suzana Borschiver

    2008-09-01

    Full Text Available Este artigo aborda um estudo de monitoramento tecnológico em biopolímeros aplicados em diversas áreas, usando como fontes de informações artigos científicos e patentes. Para tanto, foram utilizados, respectivamente, o programa Scifinder Scholar, que emprega as bases de dados CAPLUS e MEDLINE, e a base de dados americana de patentes, a USPTO. Os dados foram obtidos utilizando-se como palavras-chaves "biopolymers" e "biomaterials". Foram realizadas análises "macro", "meso" e "micro" em relação às principais universidades/centros de pesquisa, países de publicação, tipos de aplicações, principais biopolímeros mencionados, principais matérias-primas utilizadas e principais métodos de produção.This paper reports a survey on the technology of biopolymers for various sector, using information extracted from scientific articles and patents. The Scifinder Scholar program based on the CAPLUS and MEDLINE databases and the USPTO databases were used as inputs, respectively. All the data were mined using biopolymers and biomaterials as keywords. The output of this research is a map of biopolymers' university/research centers, origin countries, types of biopolymers and its applications, major raw materials and production methods.

  14. Regulation of cyclic GMP, cyclic amp and lactate dehydrogenase by putative neutrotransmitters in the C6 rat glioma cell line

    Energy Technology Data Exchange (ETDEWEB)

    Bottenstein, J.E.; de Vellis, J.

    1977-01-01

    In C6 cells norepinephrine and dopamine caused transient increases in cyclic GMP and cyclic AMP, as well as an induction of lactate dehydrogenase. All of these responses were blocked by 1-propranolol, suggesting mediation by a ..beta..-receptor. Phentolamine potentiated the NE-increased cAMP levels by 5-fold when NE was used at suboptimal doses, suggesting the presence of ..cap alpha..-adrenergic receptors in C6 cells. Carbamylcholine decreased the levels of both cyclic nucleotides, with hexamethonium partially reversing the effect on cyclic GMP. Dibutyryl-cyclic GMP or carbamylcholine reduced catecholamine-induced cyclic AMP levels. Serotonin increased cyclic GMP levels 60% and decreased cyclic AMP levels 36%. Calcium- and magnesium-free media inhibited the norepinephrine-induced levels of cyclic GMP and cyclic AMP respectively.

  15. Regulation of cyclic GMP, cyclic AMP and lactate dehydrogenase by putative neurotransmitters in the C6 rat glioma cell line

    Energy Technology Data Exchange (ETDEWEB)

    Bottenstein, J.E.; de Vellis, J.

    1978-01-01

    In C6 cells norepinephrine and dopamine caused transient increases in cyclic GMP and cyclic AMP, as well as an induction of lactate dehydrogenase. All of these responses were blocked by l-propranolol, suggesting mediation by a ..beta..-receptor. Phentolamine potentiated the NE-increased cAMP levels by 5-fold when NE was used at suboptimal doses, suggesting the presence of ..cap alpha..-adrenergic receptors in C6 cells. Carbamylcholine decreased the levels of both cyclic nucleotides, with hexamethonium partially reversing the effect on cyclic GMP. Dibutyryl-cyclic GMP or carbamylcholine reduced catecholamine-induced cyclic AMP levels. Serotonin increased cyclic GMP levels 60% and decreased cyclic AMP levels 36%. Calcium- and magnesium-free media inhibited the norepinephrine-induced levels of cyclic GMP and cyclic AMP respectively.

  16. Confirmatory factor analysis of the WAIS-IV/WMS-IV.

    Science.gov (United States)

    Holdnack, James A; Xiaobin Zhou; Larrabee, Glenn J; Millis, Scott R; Salthouse, Timothy A

    2011-06-01

    The Wechsler Adult Intelligence Scale-fourth edition (WAIS-IV) and the Wechsler Memory Scale-fourth edition (WMS-IV) were co-developed to be used individually or as a combined battery of tests. The independent factor structure of each of the tests has been identified; however, the combined factor structure has yet to be determined. Confirmatory factor analysis was applied to the WAIS-IV/WMS-IV Adult battery (i.e., age 16-69 years) co-norming sample (n = 900) to test 13 measurement models. The results indicated that two models fit the data equally well. One model is a seven-factor solution without a hierarchical general ability factor: Verbal Comprehension, Perceptual Reasoning, Processing Speed, Auditory Working Memory, Visual Working Memory, Auditory Memory, and Visual Memory. The second model is a five-factor model composed of Verbal Comprehension, Perceptual Reasoning, Processing Speed, Working Memory, and Memory with a hierarchical general ability factor. Interpretative implications for each model are discussed.

  17. Free-format RPG IV

    CERN Document Server

    Martin, Jim

    2013-01-01

    This how-to guide offers a concise and thorough introduction to the increased productivity, better readability, and easier program maintenance that comes with the free-format style of programming in RPG IV. Although free-format information is available in IBM manuals, it is not separated from everything else, thereby requiring hours of tedious research to track down the information needed. This book provides everything one needs to know to write RPG IV in the free-format style, and author Jim Martin not only teaches rules and syntax but also explains how this new style of coding has the pot

  18. Cyclic Strain Enhances Cellular Uptake of Nanoparticles

    Directory of Open Access Journals (Sweden)

    Jia Hu

    2015-01-01

    Full Text Available Nanoparticles (NPs have gained increasing interest in recent years due to their potential use as drug carrier, imaging, and diagnostic agents in pharmaceutical and biomedical applications. While many cells in vivo experience mechanical forces, little is known about the correlation of the mechanical stimulation and the internalization of NPs into cells. This paper investigates the effects of applied cyclic strain on NP uptake by cells. Bovine aortic endothelial cells (BAECs were cultured on collagen-coated culture plates and placed under cyclic equal-axial strains. NPs of sizes ranging from 50 to 200 nm were loaded at a concentration of 0.02 mg/mL and cyclic strains from 5 to 15% were applied to the cells for one hour. The cyclic strain results in a significant enhancement in NP uptake, which increases almost linearly with strain level. The enhanced uptake also depends on size of the NPs with the highest uptake observed on 100 nm NP. The effect of enhanced NP uptake lasts around 13 hours after cyclic stretch. Such in vitro cell stretch systems mimic physiological conditions of the endothelial cells in vivo and could potentially serve as a biomimetic platform for drug therapeutic evaluation.

  19. Cyclic transformation of orbital angular momentum modes

    CERN Document Server

    Schlederer, Florian; Fickler, Robert; Malik, Mehul; Zeilinger, Anton

    2015-01-01

    The spatial modes of photons are one realization of a QuDit, a quantum system that is described in a D-dimensional Hilbert space. In order to perform quantum information tasks with QuDits, a general class of D-dimensional unitary transformations is needed. Among these, cyclic transformations are an important special case required in many high-dimensional quantum communication protocols. In this paper, we experimentally demonstrate a cyclic transformation in the high-dimensional space of photonic orbital angular momentum (OAM). Using simple linear optical components, we show a successful four-fold cyclic transformation of OAM modes. Interestingly, our experimental setup was found by a computer algorithm. In addition to the four-cyclic transformation, the algorithm also found extensions to higher-dimensional cycles in a hybrid space of OAM and polarization. Besides being useful for quantum cryptography with QuDits, cyclic transformations are key for the experimental production of high-dimensional maximally enta...

  20. Cyclic transformation of orbital angular momentum modes

    Science.gov (United States)

    Schlederer, Florian; Krenn, Mario; Fickler, Robert; Malik, Mehul; Zeilinger, Anton

    2016-04-01

    The spatial modes of photons are one realization of a QuDit, a quantum system that is described in a D-dimensional Hilbert space. In order to perform quantum information tasks with QuDits, a general class of D-dimensional unitary transformations is needed. Among these, cyclic transformations are an important special case required in many high-dimensional quantum communication protocols. In this paper, we experimentally demonstrate a cyclic transformation in the high-dimensional space of photonic orbital angular momentum (OAM). Using simple linear optical components, we show a successful four-fold cyclic transformation of OAM modes. Interestingly, our experimental setup was found by a computer algorithm. In addition to the four-cyclic transformation, the algorithm also found extensions to higher-dimensional cycles in a hybrid space of OAM and polarization. Besides being useful for quantum cryptography with QuDits, cyclic transformations are key for the experimental production of high-dimensional maximally entangled Bell-states.

  1. In-situ modification, regeneration, and application of keratin biopolymer for arsenic removal

    Energy Technology Data Exchange (ETDEWEB)

    Khosa, Muhammad A.; Ullah, Aman, E-mail: amanullah@ualberta.ca

    2014-08-15

    Graphical abstract: - Highlights: • In-situ chemical modification of keratin based material was carried out. • Characterization techniques such as SEM, FTIR, XRD, and DSC were employed. • TGA data was elaborated for its complete thermal and kinetic study. • Sorption of As(III) using modified material was experimentally studied. • Thermodynamics and Isotherm study was made for elucidation of adsorption data. - Abstract: Chemical modification of chicken feathers (CF) and their subsequent role in arsenic removal from water is presented in this paper. The ground CF were chemically treated with four selective dopants such as poly (ethylene glycol) (PEG) diglycidyl ether, poly (N-isopropylacrylamide) (PNIPAM), allyl alcohol (AA) and TrisilanolCyclohexyl POSS. After modification, the solubilized keratin was regenerated by precipitation at acidic pH. The structural changes and properties of modified biopolymer were compared with untreated CF and confirmed by different characterization techniques such as SEM, FTIR, XRD, and DSC. The TGA data was used to discuss thermal decomposition and kinetic behavior of modified biopolymer exhaustively. The modified biopolymers were further investigated as biosorbents for their application in As(III) removal from water. The AA and POSS supported biosorbents executed high removal capacity for As(III) up to 11.5 × 10{sup −2}and 11.0 × 10{sup −2} mg/g from 100 ml arsenic polluted water solution respectively. Thermodynamic parameters such as ΔG{sup 0}, ΔH{sup 0}, ΔS{sup 0} were also evaluated with the finding that overall sorption process was endothermic and spontaneous in nature. Based on linear and non-linear regression analysis, Freundlich Isotherm model showed good fit for obtained sorption data apart from high linear regression values supporting Langmuir isotherm model in sorption of As(III)

  2. Aliphatic and aromatic plant biopolymer dynamics in soil particles isolated from sequential density fractionation

    Science.gov (United States)

    Caldwell, B.; Filley, T.; Sollins, P.; Lajtha, K.; Swanston, C.; Kleber, M.; Kramer, M.

    2007-12-01

    A recent multi-layer-based soil organic matter-mineral interaction mechanistic model to describe the nature of soil organic matter-mineral surface mechanism for soil organic matter stabilization predicts that proteinaceous and aliphatic materials establish the core of strong binding-interactions upon which other organic matter is layered. A key methodology providing data underpinning this hypothesis is sequential density fractionation where soil is partitioned into particles of increasing density with the assumption that a partial control on organic matter distribution through density series is the thickness of its layering. Four soils of varying mineralogy and texture were investigated for their biopolymer, isotopic, and mineralogical properties. Light fractions (cutin and suberin while heavier fractions, 1.8-2.6 g/cm3, exhibited a progressive decrease in concentration in plant derived biopolymers with density. Extractable lignin phenols exhibited a progressive oxidation state with density. The concentration of biopolymers roughly mirrored the C:N ratio of soil particles which dropped consistently with increasing particle density. Although, in all soils, both lignin phenols and SFA concentration generally decreased with increasing density the ratio SFA/lignin varied with density and depending upon the soil. All soils, except the oxisol, exhibited an increase in SFA with respect to lignin suggesting a selective stabilization of those material with respect to lignin. In the oxisol, which showed little variation in its hematite dominated mineralogy across density, SFA/lignin remained constant, potentially indicating a greater capacity to stabilize lignin in that system. Interestingly, the lignin oxidation state increased with density in the oxisol. Given the variation in soil character, the consistency in these trends it suggests a general phenomenon of progressive decay in plant derived material with thinness of mineral coating but an overall relative increase in

  3. Facile route of biopolymer mediated ferrocene (FO) nanoparticles in aqueous dispersion

    Energy Technology Data Exchange (ETDEWEB)

    Kaus, Noor Haida Mohd., E-mail: noorhaida@usm.my [School of Chemical Sciences, Universiti Sains Malaysia, 11800, Penang, Malaysia and Centre for Organized Matter Chemistry, School of Chemistry, Cantock' s Close, BS8 1TS, Bristol (United Kingdom); Collins, A. M.; Mann, S. [Centre for Organized Matter Chemistry, School of Chemistry, Cantock' s Close, BS8 1TS, Bristol (United Kingdom)

    2014-10-24

    In this paper, we present a facile method for production stable aqueous dispersion of ferrocene (FO) nanoparticles. Ferrocene compounds were employed to achieve stable nanodispersions, stabilized with three different biopolymers namely, alginate, CM-dextran and chitosan. The nanoparticles produce are spherical, less than 10 nm in mean diameter and highly stable without any sedimentation. Fourier infrared transform (FTIR) and X-ray diffraction (XRD) studies confirmed the purity of ferrocene nanoparticles there is no modifications occur during the preparation route. FTIR spectra results were consistent with the presence of absorption band of cyclopentadienyl ring (C{sub 5}H{sub 5}{sup −} ion) which assigned to ν(C-C) vibrations (1409 cm-1), δ(C-H) stretching at 1001 cm{sup −1} and π(C-H) vibrations at 812 cm{sup −1}. Furthermore, all functional group for biopolymers such as CO from carboxyl group of CM-dextran and sodium alginate appears at 1712 cm{sup −1} and 1709 cm{sup −1} respectively, indicating there are steric repulsion interactions for particles stabilization. Powder X-ray diffraction patterns of sedimented samples of the biopolymers-stabilized ferrocene (FO) showed all reflections which were indexed respectively to the (−110), (001), (−201), (−111), (200), (−211), (210), (120) and (111) according to the monoclinic phase ferrocene. This confirmed that the products obtained were of high purity of Fe and EDAX analysis also suggests that the presence of the Fe element in the colloidal dispersion.

  4. Sugar Based Biopolymers in Nanomedicine; New Emerging Era for Cancer Imaging and Therapy.

    Science.gov (United States)

    Eroglu, Mehmet S; Oner, Ebru Toksoy; Mutlu, Esra Cansever; Bostan, Muge Sennaroglu

    2017-01-01

    Since last decade, sugar based biopolymers are recognized in nanomedicine as promising materials for cancer imaging and therapy. Their durable, biocompatible and adhesive properties enable the fine tuning of their molecular weights (MW) and their miscellaneous nature makes the molecules acquire various conformations. These in turn provide effective endocytosis by cancer cell membranes that have already been programmed for internalization of different kinds of sugars. Therefore, biocompatible sugar based nanoparticles (SBNPs) are suitable for both cell-selective delivery of drugs and imaging through the human body. Recently, well known sugar-based markers have displayed superior performance to overcome tumor metastasis. Thereby, targeting strategies for cancer cells have been broadened to sugar-based markers as noticed in various clinic phases. In these studies, biopolymers such as chitosan, hyaluronic acid, mannan, dextran, levan, pectin, cyclodextrin, chondroitin sulphate, alginates, amylose and heparin are chemically functionalized and structurally designed as new biocompatible nanoparticles (NPs). The future cancer treatment strategies will mainly comprise of these multifunctional sugar based nanoparticles which combine the therapeutic agents with imaging technologies with the aim of rapid monitoring response to therapies. While each individual imaging and treatment step requires a long time period in effective treatment of diseases, these multifunctional sugar based nanoparticles will have the advantage of rapid detection, right drug efficiency evaluation and immediate interfere opportunity to some important diseases, especially rapidly progressing cancers. In this article, we evaluated synthesis, characterization and applications of main sugar based biopolymers and discussed their great promise in nano-formulations for cancer imaging and therapy. However much should be done and optimized prior to clinical applications of these nano-formulations for an

  5. Characterizing the changes in biopolymer composition in roots of photosynthetically divergent grasses exposed to future climates

    Science.gov (United States)

    Suseela, V.; Tharayil, N.; Pendall, E.

    2014-12-01

    A majority of carbon in soil is derived from plant roots, yet roots remain remarkably less explored. Root tissues are abundant in heteropolymers such as suberin, lignin and tannins which are energetically demanding to depolymerize, thus facilitating the accrual of carbon in soil. Most biopolymers are operationally/functionally defined and their function is regulated by the identity of monomers and the linkages connecting these monomers. The structural chemistry of these biopolymers could vary with the environmental conditions experienced during their formative stage thus altering the potential for soil carbon sequestration. We examined the biopolymer composition in the roots of a C3 (Hesperostipa comata) and a C4 (Bouteloua gracilis) grass species exposed to a factorial combination of warming and elevated CO2 at the Prairie Heating and CO2 Enrichment (PHACE) experiment, Wyoming, USA. The grass roots were subjected to a sequential solvent extraction and base hydrolysis to delineate various operational fractions within the polydisperse matrix. The extracted fractions were analyzed using various chromatography mass spectrometry platforms. Warming and elevated CO2 increased the total suberin content and the amount of ω-hydroxy acids in C4 grass species while in C3 species there was a trend of increasing concentration of α,ω-dioic acids in roots exposed to elevated CO2 compared to ambient CO2 treatment. Our results highlight the effect of warming and elevated CO2 on the chemical composition of heteropolymers in roots that may potentially alter root function and rate of decomposition leading to changes in soil carbon in a future warmer world.

  6. Ion- and pH-dependent volume transitions in biopolymer gels

    Science.gov (United States)

    Horkay, Ference

    2008-03-01

    Swelling and collapse of polyelectrolyte gels are the result of a balance of different interactions that control the osmotic pressure and network elasticity. In biopolymer systems ions often play a central role in determining the phase behavior. For example, DNA condensation induced by multivalent cations is crucial for its packaging. It is known that biological processes, such as nerve excitation and muscle contraction, are mediated by divalent cations. In general, relatively little is known about the interaction between multivalent ions and charged biopolymers due to the lack of an appropriate theory and the absence of a sufficiently broad base of experimental data. Recent experimental observations made by anomalous small-angle X-ray scattering indicate that the spatial extent of the counterion cloud is significantly reduced in the case of divalent ions relative to the monovalent ions. An understanding of ion induced swelling/collapse transition in polyelectrolyte gels may shed light on the mechanism of important physiological processes. We compare the effects of pH, ionic strength and counterion valence on the structure and osmotic properties of biopolymer gels. Systematic studies made on DNA gels indicate that monovalent salts gradually reduce gel swelling but do not cause discontinuous volume transition. Introducing calcium ions into the gels produces a reversible volume change. Similarly, decreasing the pH in the surrounding environment leads to shrinkage of the swollen networks. Scattering observations reveal that cations mediate the equilibrium properties by modifying the local environment and the organization of the polymer chains. Osmotic pressure measurements detect significant differences between the effects of pH and ion valence.

  7. Beyond Textbook Illustrations: Hand-Held Models of Ordered DNA and Protein Structures as 3D Supplements to Enhance Student Learning of Helical Biopolymers

    Science.gov (United States)

    Jittivadhna, Karnyupha; Ruenwongsa, Pintip; Panijpan, Bhinyo

    2010-01-01

    Textbook illustrations of 3D biopolymers on printed paper, regardless of how detailed and colorful, suffer from its two-dimensionality. For beginners, computer screen display of skeletal models of biopolymers and their animation usually does not provide the at-a-glance 3D perception and details, which can be done by good hand-held models. Here, we…

  8. Contribution of alpha3(IV)alpha4(IV)alpha5(IV) Collagen IV to the Mechanical Properties of the Glomerular Basement Membrane

    Science.gov (United States)

    Gyoneva, Lazarina

    The glomerular basement membrane (GBM) is a vital part of the blood-urine filtration barrier in the kidneys. In healthy GBMs, the main tension-resisting component is alpha3(IV)alpha4(IV)alpha5(IV) type IV collagen, but in some diseases it is replaced by other collagen IV isoforms. As a result, the GBM becomes leaky and disorganized, ultimately resulting in kidney failure. Our goal is to understanding the biomechanical aspects of the alpha3(IV)alpha4(IV)alpha5(IV) chains and how their absence could be responsible for (1) the initial injury to the GBM and (2) progression to kidney failure. A combination of experiments and computational models were designed for that purpose. A model basement membrane was used to compare experimentally the distensibility of tissues with the alpha3(IV)alpha4(IV)alpha5(IV) chains present and missing. The experiments showed basement membranes containing alpha3(IV)alpha4(IV)alpha5(IV) chains were less distensible. It has been postulated that the higher level of lateral cross-linking (supercoiling) in the alpha3(IV)alpha4(IV)alpha5(IV) networks contributes additional strength/stability to basement membranes. In a computational model of supercoiled networks, we found that supercoiling greatly increased the stiffness of collagen IV networks but only minimally decreased the permeability, which is well suited for the needs of the GBM. It is also known that the alpha3(IV)alpha4(IV)alpha5(IV) networks are more protected from enzymatic degradation, and we explored their significance in GBM remodeling. Our simulations showed that the more protected network was needed to prevent the system from entering a dangerous feedback cycle due to autoregulation mechanisms in the kidneys. Overall, the work adds to the evidence of biomechanical differences between the alpha3(IV)alpha4(IV)alpha5(IV) networks and other collagen IV networks, points to supercoiling as the main source of biomechanical differences, discusses the suitability of alpha3(IV)alpha4(IV

  9. Ovalbumin-gum arabic interactions: effect of pH, temperature, salt, biopolymers ratio and total concentration.

    Science.gov (United States)

    Niu, Fuge; Su, Yujie; Liu, Yuntao; Wang, Guanchao; Zhang, Yang; Yang, Yanjun

    2014-01-01

    The formation of soluble and insoluble complexes between ovalbumin (OVA) and gum arabic (GA) polysaccharide was investigated under specific conditions (pH 1.0-7.0; temperature 4-55 °C; NaCl concentration 0-60mM; total biopolymer concentration 0.05-3.0 wt%) by turbidimetric analysis. For the 2:1 OVA:GA ratio and in the absence of NaCl, soluble and insoluble complexes were observed at pH 4.61 (pHφ1) and 4.18 (pHφ2), respectively, with optimal biopolymer interactions occurring at pH 3.79 (pHopt). Under the same conditions, OVA alone gave only a weak turbidity intensity (turbidity biopolymer concentration increased until reaching a critical value (2.0%), afterwards becoming a constant value.

  10. Adsorption of aluminum and lead from wastewater by chitosan-tannic acid modified biopolymers: Isotherms, kinetics, thermodynamics and process mechanism.

    Science.gov (United States)

    Badawi, M A; Negm, N A; Abou Kana, M T H; Hefni, H H; Abdel Moneem, M M

    2017-06-01

    Chitosan was reacted by tannic acid to obtain three modified chitosan biopolymer. Their chemical structures were characterized by FTIR and elemental analysis. The prepared biopolymers were used to adsorb Al(III) and Pb(II) metal ions from industrial wastewater. The factors affecting the adsorption process were biosorbent amount, initial concentration of metal ion and pH of the medium. The adsorption efficiency increased considerably with the increase of the biosorbent amount and pH of the medium. The adsorption process of biosorbent on different metal ions was fitted by Freundlich adsorption model. The adsorption kinetics was followed Pseudo-second-order kinetic model. The adsorption process occurred according to diffusion mechanism which was confirmed by the interparticle diffusion model. The modified biopolymers were efficient biosorbents for removal of Pb(II) and Al(III) metal ions from the medium. Copyright © 2017 Elsevier B.V. All rights reserved.

  11. Soft Tissue Regeneration under the Effect of Wound Coating Based on Chitosan (Natural Biopolymer).

    Science.gov (United States)

    Gladkova, E V; Babushkina, I V; Norkin, I A; Mamonova, I A; Puchin'yan, D M; Konyuchenko, E A

    2016-03-01

    We developed wound coating based on natural biopolymer chitosan with additional components (ceruloplasmin, L-asparaginic acid, and glycerol). Experiments on albino male rats demonstrated its regeneratory, antioxidant, and antibacterial effects on wounds involving all layers of the skin. Due to chemical composition and buffer component, the biodegraded wound coating optimizes all phases of the wound process, accelerates by 22-28% the reparative regeneration, and leads to anatomic and functional restoration of injured sites. High absorption capacity recommends its use in the treatment of wounds with profuse exudation.

  12. Eco-Friendly Extraction of Biopolymer Chitin and Carotenoids from Shrimp Waste

    Science.gov (United States)

    Prameela, K.; Venkatesh, K.; Divya vani, K.; Sudesh Kumar, E.; Mohan, CH Murali

    2017-08-01

    Astaxanthin a nutraceutical and chitin a natural biopolymer present in shrimp waste. In current chemical extraction methods HCl and NaOH are used for extraction and these chemicals are introduced into aquatic ecosystems are spoiling aquatic flora and fauna, pollute the environment and destroy astaxanthin. Lactobacillus species were isolated from gut of Solenocera melantho and characterized phenotypically and genotypically. Initial screening experiments have shown to be an effective and identified as Lactobacillus plantaram based on morphological, biochemical characteristics and molecular analysis. Efficiency of fermentation has shown with good yield of astaxanthin and recovery of chitin. Hence this alternative microbial process is having advantage than existing hazardous, non-economical chemical process.

  13. Role of Native and Exotic Earthworms in Plant Biopolymer Dynamics in Forest Soil

    Science.gov (United States)

    Filley, Timothy

    2010-05-01

    Many forests within northern North America are experiencing the introduction of earthworms for the first time, presumably since before the last major glaciation. Forest dynamics are undergoing substantial changes because of the activity of the mainly European lumbricid species. Documented losses in litter layers, expansion of A-horizons, loss of the organic horizon, changes in fine root density, and shifts in microbial populations have all been documented in invaded zones. Two free air CO2 enrichment (FACE) forest experiments (aspen FACE at Rhinelander, Wisconsin and sweet gum FACE at Oak Ridge National Lab, Tennessee) lie within the zones of invasion and exhibit differences in amounts of exotic and native species as well as endogeic (predominantly mineral soil dwelling) and epigeic (litter and organic matter horizon dwelling) types. Considerations of carbon accrual dynamics and relative input of above vs. below ground plant input in these young successional systems do not consider the potential impact of these ecosystem engineers. We investigated the impact of earthworm activity by tracking the relative abundance and stable carbon isotope compositions of lignin and substituted fatty acids extracted from isolated earthworms and their fecal pellets and from host soils. Indications of root vs leaf input to earthworm casts and fecal matter were derived from differences in the chemical composition of cutin, suberin, and lignin. The isotopically depleted CO2 used in FACE and the resulting isotopically depleted plant organic matter afford an excellent opportunity to assess biopolymer-specific turnover dynamics. We find that endogeic species are proportionately more responsible for fine root cycling while some epigeic species are responsible for microaggregation of foliar cutin. CSIA of fecal pellet lignin and SFA indicates how these biopolymer pools can be derived from variable sources, roots, background soil, foliar tissue within one earthworm. Additionally, CSIA

  14. The Influence of Biopolym-Granulate on Performance of Fattening Cattle

    Directory of Open Access Journals (Sweden)

    Bohuslav Čermák

    2012-05-01

    Full Text Available On the two farms were conducted operational trials with application preparation Biopolym-granulate in fattening cattle. The experimental groups were injected preparation by adding the mixed ration. Bulls were weighed regularly and after the experiments were collected and analyzed samples of meat. Experimental groups were killed in 520 days of age after control over 600 days. In experimental groups were found value higher protein, lower fat value, significantly higher binding capacity of added water. Hence I better sensory value of meat of slaughtered animals, even when the net value weight was compared with the control group lower.

  15. Single Molecule Science for Personalized Nanomedicine: Atomic Force Microscopy of Biopolymer-Protein Interactions

    Science.gov (United States)

    Hsueh, Carlin

    Nanotechnology has a unique and relatively untapped utility in the fields of medicine and dentistry at the level of single-biopolymer and -molecule diagnostics. In recent years atomic force microscopy (AFM) has garnered much interest due to its ability to obtain atomic-resolution of molecular structures and probe biophysical behaviors of biopolymers and proteins in a variety of biologically significant environments. The work presented in this thesis focuses on the nanoscale manipulation and observation of biopolymers to develop an innovative technology for personalized medicine while understanding complex biological systems. These studies described here primarily use AFM to observe biopolymer interactions with proteins and its surroundings with unprecedented resolution, providing a better understanding of these systems and interactions at the nanoscale. Transcriptional profiling, the measure of messenger RNA (mRNA) abundance in a single cell, is a powerful technique that detects "behavior" or "symptoms" at the tissue and cellular level. We have sought to develop an alternative approach, using our expertise in AFM and single molecule nanotechnology, to achieve a cost-effective high throughput method for sensitive detection and profiling of subtle changes in transcript abundance. The technique does not require amplification of the mRNA sample because the AFM provides three-dimensional views of molecules with unprecedented resolution, requires minimal sample preparation, and utilizes a simple tagging chemistry on cDNA molecules. AFM images showed collagen polymers in teeth and of Drebrin-A remodeling of filamentous actin structure and mechanics. AFM was used to image collagen on exposed dentine tubules and confirmed tubule occlusion with a desensitizing prophylaxis paste by Colgate-Palmolive. The AFM also superseded other microscopy tools in resolving F-actin helix remodeling and possible cooperative binding by a neuronal actin binding protein---Drebrin-A, an

  16. Morphological, thermal and annealed microhardness characterization of gelatin based interpenetrating networks of polyacrylonitrile: A hard biopolymer

    Indian Academy of Sciences (India)

    Sangita Rajvaidya; R Bajpai; A K Bajpai

    2005-10-01

    The present paper reports the preparation of full IPNs of gelatin and polyacrylonitrile. Various compositions of gluteraldehyde crosslinked gelatin and N,N′-methylene-bis-acrylamide crosslinked PAN were characterized by SEM and DSC techniques. The IPNs were also thermally pretreated by the annealing process. The effects of annealing temperature on the microhardness of IPNs were studied using the Vickers method. SEM indicates the homogeneous morphological features for IPN. The role of gelatin, AN and crosslinker on the developed hard biopolymer has been described with the help of DSC thermograms and microhardness measurements of annealed specimens and good correlation is observed.

  17. Biolubricant induced phase inversion and superhydrophobicity in rubber-toughened biopolymer/organoclay nanocomposites

    Science.gov (United States)

    Bayer, Ilker S.; Steele, Adam; Martorana, Philip; Loth, Eric; Robinson, Scott J.; Stevenson, Darren

    2009-08-01

    We present a simple technique to fabricate rubber-toughened biopolymer/organoclay nanocomposite coatings with highly water repellent surface wetting characteristics and strong adhesion to metal surfaces. The technique combines the principles of phase inversion and atomization of multicomponent polymer/organoclay suspensions containing a biolubricant as the nonsolvent. The biolubricant was a blend of cyclomethicone/dimethiconol oil with fruit kernel oils. The ternary system of cellulose nitrate/solvent/biolubricant was blended with rubber dispersed organoclay nanofluids. Natural, synthetic, and fluoroacrylic latex rubbers were used for the purpose. Self-cleaning superhydrophobic coatings were obtained from synthetic and fluoroacrylic rubbers whereas natural rubber containing formulations resulted in sticky superhydrophobic coatings.

  18. Green synthesis of silver nanoparticles in biopolymer stabilizer and their application as antibacterial efficacy

    Science.gov (United States)

    Faried, Miftah; Shameli, Kamyar; Ubaidillah, Miyake, Mikio; Hara, Hirofumi; Khairudin, Nurul Bahiyah Ahmad

    2017-01-01

    The synthesis of silver nanoparticles (Ag-NPs) has been conducted on the biopolymer media which is sodium alginate (Na-Alg) via the green method. Different times of ultrasound irradiation was used to reduce Ag+ to be Ag seed (Ag0) and produce Ag-NPs. The Ag-NPs was analyzed in their surface plasmon resonance (SPR), morphology, biomolecule responsible, and stability via UV-Vis, TEM, FTIR and Zeta potential, respectively. The application as antibacterial properties was studied against bacteria. Furthermore, this Ag-NPs could be synthesized using the green method and used as antibacterial efficacy for medical vehicles, would dressing, and so on.

  19. Neutron scattering studies of the dynamics of biopolymer-water systems using pulsed-source spectrometers

    Energy Technology Data Exchange (ETDEWEB)

    Middendorf, H.D. [Univ. of Oxford (United Kingdom); Miller, A. [Stirling Univ., Stirling (United Kingdom)

    1994-12-31

    Energy-resolving neutron scattering techniques provide spatiotemporal data suitable for testing and refining analytical models or computer simulations of a variety of dynamical processes in biomolecular systems. This paper reviews experimental work on hydrated biopolymers at ISIS, the UK Pulsed Neutron Facility. Following an outline of basic concepts and a summary of the new instrumental capabilities, the progress made is illustrated by results from recent experiments in two areas: quasi- elastic scattering from highly hydrated polysaccharide gels (agarose and hyaluronate), and inelastic scattering from vibrational modes of slightly hydrated collagen fibers.

  20. Biopolymer-supported ionic-liquid-phase ruthenium catalysts for olefin metathesis.

    Science.gov (United States)

    Clousier, Nathalie; Filippi, Alexandra; Borré, Etienne; Guibal, Eric; Crévisy, Christophe; Caijo, Fréderic; Mauduit, Marc; Dez, Isabelle; Gaumont, Annie-Claude

    2014-04-01

    Original ruthenium supported ionic liquid phase (SILP) catalysts based on alginates as supports were developed for olefin metathesis reactions. The marine biopolymer, which fulfills most of the requisite properties for a support such as widespread abundance, insolubility in the majority of organic solvents, a high affinity for ionic liquids, high chemical stability, biodegradability, low cost, and easy processing, was impregnated by [bmim][PF6 ] containing an ionically tagged ruthenium catalyst. These biosourced catalysts show promising performances in ring-closing metathesis (RCM) and cross-metathesis (CM) reactions, with a high level of recyclability and reusability combined with a good reactivity.

  1. Structural biopolymer preservation in Miocene leaf fossils from the Clarkia site, northern Idaho.

    Science.gov (United States)

    Logan, G A; Boon, J J; Eglinton, G

    1993-03-15

    The 17- to 20-million-year-old locality at Clarkia, northern Idaho, is renowned for yielding amplifiable DNA from a magnolia leaf fossil. In-source pyrolysis-mass spectrometry and pyrolysis-gas chromatography/mass spectrometry now reveal that molecular preservation of biomacromolecules is highly selective; structural polysaccharides, cutin polyesters, and proteins were not preserved in detectable quantity in the leaf tissues, whereas both lignin and an aliphatic biopolymer were detected. This study points up the need for improved understanding of the precise modes and extent of preservation of biomacromolecules in fossil materials and sediments.

  2. Control of microbiological corrosion on carbon steel with sodium hypochlorite and biopolymer.

    Science.gov (United States)

    Oliveira, Sara H; Lima, Maria Alice G A; França, Francisca P; Vieira, Magda R S; Silva, Pulkra; Urtiga Filho, Severino L

    2016-07-01

    In the present work, the interaction of a mixture of a biocide, sodium hypochlorite (NaClO), and a biopolymer, xanthan, with carbon steel coupons exposed to seawater in a turbulent flow regime was studied. The cell concentrations, corrosion rates, biomasses, and exopolysaccharides (EPSs) produced on the coupon surfaces with the various treatments were quantified. The corrosion products were evaluated using X-ray diffraction (XRD), and the surfaces of steels were analysed by scanning electron microscopy (SEM). The results indicated that xanthan and the hypochlorite-xanthan mixture reduced the corrosion rate of steel.

  3. Biosurfactant-biopolymer driven microbial enhanced oil recovery (MEOR) and its optimization by an ANN-GA hybrid technique.

    Science.gov (United States)

    Dhanarajan, Gunaseelan; Rangarajan, Vivek; Bandi, Chandrakanth; Dixit, Abhivyakti; Das, Susmita; Ale, Kranthikiran; Sen, Ramkrishna

    2017-08-20

    A lipopeptide biosurfactant produced by marine Bacillus megaterium and a biopolymer produced by thermophilic Bacillus licheniformis were tested for their application potential in the enhanced oil recovery. The crude biosurfactant obtained after acid precipitation effectively reduced the surface tension of deionized water from 70.5 to 28.25mN/m and the interfacial tension between lube oil and water from 18.6 to 1.5mN/m at a concentration of 250mgL(-1). The biosurfactant exhibited a maximum emulsification activity (E24) of 81.66% against lube oil. The lipopeptide micelles were stabilized by addition of Ca(2+) ions to the biosurfactant solution. The oil recovery efficiency of Ca(2+) conditioned lipopeptide solution from a sand-packed column was optimized by using artificial neural network (ANN) modelling coupled with genetic algorithm (GA) optimization. Three important parameters namely lipopeptide concentration, Ca(2+) concentration and solution pH were considered for optimization studies. In order to further improve the recovery efficiency, a water soluble biopolymer produced by Bacillus licheniformis was used as a flooding agent after biosurfactant incubation. Upon ANN-GA optimization, 45% tertiary oil recovery was achieved, when biopolymer at a concentration of 3gL(-1) was used as a flooding agent. Oil recovery was only 29% at optimal conditions predicted by ANN-GA, when only water was used as flooding solution. The important characteristics of biopolymers such as its viscosity, pore plugging capabilities and bio-cementing ability have also been tested. Thus, as a result of biosurfactant incubation and biopolymer flooding under the optimal process conditions, a maximum oil recovery of 45% was achieved. Therefore, this study is novel, timely and interesting for it showed the combined influence of biosurfactant and biopolymer on solubilisation and mobilization of oil from the soil. Copyright © 2017 Elsevier B.V. All rights reserved.

  4. Evaluation of homogeneous electrocatalysts by cyclic voltammetry.

    Science.gov (United States)

    Rountree, Eric S; McCarthy, Brian D; Eisenhart, Thomas T; Dempsey, Jillian L

    2014-10-06

    The pursuit of solar fuels has motivated extensive research on molecular electrocatalysts capable of evolving hydrogen from protic solutions, reducing CO2, and oxidizing water. Determining accurate figures of merit for these catalysts requires the careful and appropriate application of electroanalytical techniques. This Viewpoint first briefly presents the fundamentals of cyclic voltammetry and highlights practical experimental considerations before focusing on the application of cyclic voltammetry for the characterization of electrocatalysts. Key metrics for comparing catalysts, including the overpotential (η), potential for catalysis (E(cat)), observed rate constant (k(obs)), and potential-dependent turnover frequency, are discussed. The cyclic voltammetric responses for a general electrocatalytic one-electron reduction of a substrate are presented along with methods to extract figures of merit from these data. The extension of this analysis to more complex electrocatalytic schemes, such as those responsible for H2 evolution and CO2 reduction, is then discussed.

  5. Cyclic distillation technology - A mini-review

    DEFF Research Database (Denmark)

    Bîldea, Costin Sorin; Pătruţ, Cătălin; Jørgensen, Sten Bay;

    2016-01-01

    Process intensification in distillation systems has received much attention during the past decades, with the aim of increasing both energy and separation efficiency. Various techniques, such as internal heat-integrated distillation, membrane distillation, rotating packed bed, dividing-wall columns...... and reactive distillation were studied and reported in literature. All these techniques employ the conventional continuous counter-current contact of vapor and liquid phases. Cyclic distillation technology is based on an alternative operating mode using separate phase movement which leads to key practical...... advantages in both chemical and biochemical processes. This article provides a mini-review of cyclic distillation technology. The topics covered include the working principle, design and control methods, main benefits and limitations as well as current industrial applications. Cyclic distillation can...

  6. 11. IV avati Draakoni galeriis...

    Index Scriptorium Estoniae

    2005-01-01

    Tanel Saare (sünd. 1979) näitus "Gott und huhn episode IV: seed shower". Eksponeeritakse väljavõtteid aktsioonidest aastatel 2000-2004 Turus, Nürnbergis, Berliinis, Lohusalus ja Soulis. Osa aktsioone toimus koos rühmitusega Non Grata

  7. VeVeRa-IV

    NARCIS (Netherlands)

    Evelien Eggink; Debbie Oudijk; Klarita Sadiraj

    2012-01-01

    Original title: VeVeRa-IV The Dutch population is set to age rapidly in the coming years. More and more people will also attain a very great age. This means that the need for home care and care provided in nursing or residential care homes will also increase. As part of the Long-term Care Programme

  8. Phase IV of Drug Development.

    Science.gov (United States)

    Suvarna, Viraj

    2010-04-01

    Not all Phase IV studies are post-marketing surveillance (PMS) studies but every PMS study is a phase IV study. Phase IV is also an important phase of drug development. In particular, the real world effectiveness of a drug as evaluated in an observational, non-interventional trial in a naturalistic setting which complements the efficacy data that emanates from a pre-marketing randomized controlled trial (RCT). No matter how many patients are studied pre-marketing in a controlled environment, the true safety profile of a drug is characterized only by continuing safety surveillance through a spontaneous adverse event monitoring system and a post-marketing surveillance/non-interventional study. Prevalent practice patterns can generate leads that could result in further evaluation of a new indication via the RCT route or even a signal that may necessitate regulatory action (change in labeling, risk management/minimization action plan). Disease registries are another option as are the large simple hybrid trials. Surveillance of spontaneously reported adverse events continues as long as a product is marketed. And so Phase IV in that sense never ends.

  9. Phase IV of Drug Development

    Directory of Open Access Journals (Sweden)

    Viraj Suvarna

    2010-01-01

    Full Text Available Not all Phase IV studies are post-marketing surveillance (PMS studies but every PMS study is a phase IV study. Phase IV is also an important phase of drug development. In particular, the real world effectiveness of a drug as evaluated in an observational, non-interventional trial in a naturalistic setting which complements the efficacy data that emanates from a pre-marketing randomized controlled trial (RCT. No matter how many patients are studied pre-marketing in a controlled environment, the true safety profile of a drug is characterized only by continuing safety surveillance through a spontaneous adverse event monitoring system and a post-marketing surveillance/non-interventional study. Prevalent practice patterns can generate leads that could result in further evaluation of a new indication via the RCT route or even a signal that may necessitate regulatory action (change in labeling, risk management/minimization action plan. Disease registries are another option as are the large simple hybrid trials. Surveillance of spontaneously reported adverse events continues as long as a product is marketed. And so Phase IV in that sense never ends.

  10. Ricinus communis-based biopolymer and epidermal growth factor regulations on bone defect repair: A rat tibia model

    Science.gov (United States)

    Mendoza-Barrera, C.; Meléndez-Lira, M.; Altuzar, V.; Tomás, S. A.

    2003-01-01

    We report the effect of the addition of an epidermal growth factor to a Ricinus communis-based biopolymer in the healing of a rat tibia model. Bone repair and osteointegration after a period of three weeks were evaluated employing photoacoustic spectroscopy and x-ray diffraction. A parallel study was performed at 1, 2, 3, 4, 5, 6, 7, and 8 weeks with energy dispersive x-ray spectroscopy. We conclude that the use of an epidermal growth factor (group EGF) in vivo accelerates the process of bony repair in comparison with other groups, and that the employment of the Ricinus communis-based biopolymer as a bone substitute decreases bone production.

  11. Cyclic Polymer with Alternating Monomer Sequence.

    Science.gov (United States)

    Zhu, Wen; Li, Zi; Zhao, Youliang; Zhang, Ke

    2015-11-01

    Cyclic polymers with alternating monomer sequence are synthesized for the first time based on the ring-closure strategy. Well-defined telechelic alternating polymers are synthesized by reversible addition-fragmentation chain transfer polymerization by copolymerizing the electron acceptor monomer of N-benzylmaleimide and donor monomer of styrene with a feed ratio of 1 between them. The corresponding cyclic alternating polymers are then produced by the UV-induced Diels-Alder click reaction to ring-close the linear alternating polymer precursors under highly diluted reaction solution.

  12. On cyclic associative Abel-Grassman groupoids

    OpenAIRE

    Iqbal, Muhammad; Ahmad, Imtiaz; Shah, Muhammad; Ali, Muhammad Irfan

    2015-01-01

    A new subclass of AG-groupoids, so called, cyclic associative Abel-Grassman groupoids or CA-AG-groupoid is studied. These have been enumerated up to order $6$. A test for the verification of cyclic associativity for an arbitrary AG-groupoid has been introduced. Various properties of CA-AG-groupoids have been studied. Relationship among CA-AG-groupoids and other subclasses of AG-groupoids is investigated. It is shown that the subclass of CA-AG-groupoid is different from that of the AG{*}-group...

  13. Undrained Cyclic Behaviour of Dense Frederikshavn Sand

    DEFF Research Database (Denmark)

    Nielsen, Søren Kjær; Ibsen, Lars Bo; Sørensen, Kris Wessel

    2013-01-01

    A modified contour diagram is created for the Frederikshavn Sand in the undrained case for a relative density of ID = 80 %. It can be used to estimate the number of cycles to failure for a given combination of pore pressure, average and cyclic load ratio. The diagram is based on a series of undra......A modified contour diagram is created for the Frederikshavn Sand in the undrained case for a relative density of ID = 80 %. It can be used to estimate the number of cycles to failure for a given combination of pore pressure, average and cyclic load ratio. The diagram is based on a series...

  14. Cyclic Entropy: An Alternative to Inflationary Cosmology

    CERN Document Server

    Frampton, Paul Howard

    2015-01-01

    We address how to construct an infinitely cyclic universe model. A major consideration is to make the entropy cyclic which requires the entropy to be reset to zero in each cycle expansion to turnaround, to contraction, to bounce, etc. Here we reset entropy at the turnaround by selecting the visible universe from the multiverse which is generated by the accelerated expansion. In the model, the observed homogeneity is explained by the low entropy at the bounce, The observed flatness arises from the contraction together with the reduction in size between the expanding and contracting universe. The present flatness is predicted to be very precise.

  15. Ultrafast cyclic voltammetry with asymmetrical potential scan

    Institute of Scientific and Technical Information of China (English)

    Zhi Yong Guo; Xiang Qin Lin

    2008-01-01

    Based on the perfect ohmic drop compensation by online electronic positive feedback, ultrafast cyclic voltammetry withasymmetrical potential scan is achieved for the first time, with the reduction of anthracene acting as the test system. Compared withthe traditional cyclic voltammetry utilizing symmetrical triangular waveform as the excitation one, the new method allows a simplerapproach to mechanistic analysis of ultrafast chemical reactions coupled with a charge transfer. And perhaps more important, it alsoprovides a way to eliminate the interference of the adsorbed product in dynamic monitoring.

  16. Severe congenital cyclic neutropenia: A case report

    Science.gov (United States)

    Patil, Vidyavathi H; Hugar, Shivayogi M; Balikai, Girish; Patil, Sudha

    2016-01-01

    Congenital cyclic neutropenia syndrome is a constitutional genetic disorder which is characterized by very low number of neutrophils (neutropenia). Patients suffering from this disorder clinically present with neutropenia at early age, history of recurrent fever, ulcerations in the oral cavity, gingivitis, and other recurrent infections. This paper describes a case report of a child with recurrent mouth ulcers, fever, and later diagnosed with severe congenital cyclic neutropenia. This also emphasizes the importance of identification of rare causes of immunosuppressive conditions in children presenting with recurrent oral ulcers and poor dental hygiene, to prevent long-term complications of oral cavity and also morbidity and mortality secondary to neutropenic sepsis. PMID:27857902

  17. Development of a design methodology for high temperature cyclic applications of materials which experience cyclic softening

    Energy Technology Data Exchange (ETDEWEB)

    Marriott, D.L.; Stubbins, J.F. (Illinois Univ., Urbana, IL (USA). Dept. of Mechanical and Industrial Engineering)

    1988-12-01

    The project has as its original focus the high temperature behavior of 2.25 Cr-1 Mo steel, heat treated to produce a predominantly bainitic microstructure and the load carrying response of components made of this material. Experiments were carried out on uniform and notched specimens under both steady and cyclic loading using specially acquired electromechanical test machines. It emerged that a very important feature of mechanical behavior under the conditions of interest was the strong tendency of this material to cyclically soften, particularly at high temperature in the creep range, giving the illusion of a severe creep-fatigue interaction under certain conditions. This finding led to a significant component of the project being devoted to investigation of the effects of local, as opposed to generalized, cyclic softening, and the implications this phenomenon might have on the setting of allowable design stress limits. The format of this report is as follows: The second chapter is a review of the work carried out in approximately chronological order under the headings of work was carried out under the following: (1) 2.25 Cr 1 Mo Steel -- Elevated Temperature Fatigue and Environmental Effects; (2) Preliminary Studies of Advanced Austenitics; (3) A Uniaxial Constitutive Model for Cyclic Softening; (4) The Iso-Cyclic Stress-Strain Approach to Evaluation of Components in Cyclic Softening Materials; (5) Testing of High Temperature Austenitic Alloys; and (6) Design Methodology for Aging Materials -- Application to Cyclic Softening. 65 refs., 39 figs., 7 tabs.

  18. Mutations of PKA cyclic nucleotide-binding domains reveal novel aspects of cyclic nucleotide selectivity.

    Science.gov (United States)

    Lorenz, Robin; Moon, Eui-Whan; Kim, Jeong Joo; Schmidt, Sven H; Sankaran, Banumathi; Pavlidis, Ioannis V; Kim, Choel; Herberg, Friedrich W

    2017-07-06

    Cyclic AMP and cyclic GMP are ubiquitous second messengers that regulate the activity of effector proteins in all forms of life. The main effector proteins, the 3',5'-cyclic adenosine monophosphate (cAMP)-dependent protein kinase (PKA) and the 3',5'-cyclic guanosine monophosphate (cGMP)-dependent protein kinase (PKG), are preferentially activated by cAMP and cGMP, respectively. However, the molecular basis of this cyclic nucleotide selectivity is still not fully understood. Analysis of isolated cyclic nucleotide-binding (CNB) domains of PKA regulatory subunit type Iα (RIα) reveals that the C-terminal CNB-B has a higher cAMP affinity and selectivity than the N-terminal CNB-A. Here, we show that introducing cGMP-specific residues using site-directed mutagenesis reduces the selectivity of CNB-B, while the combination of two mutations (G316R/A336T) results in a cGMP-selective binding domain. Furthermore, introducing the corresponding mutations (T192R/A212T) into the PKA RIα CNB-A turns this domain into a highly cGMP-selective domain, underlining the importance of these contacts for achieving cGMP specificity. Binding data with the generic purine nucleotide 3',5'-cyclic inosine monophosphate (cIMP) reveal that introduced arginine residues interact with the position 6 oxygen of the nucleobase. Co-crystal structures of an isolated CNB-B G316R/A336T double mutant with either cAMP or cGMP reveal that the introduced threonine and arginine residues maintain their conserved contacts as seen in PKG I CNB-B. These results improve our understanding of cyclic nucleotide binding and the molecular basis of cyclic nucleotide specificity. © 2017 The Author(s); published by Portland Press Limited on behalf of the Biochemical Society.

  19. Synthesis, Spectroscopic, and Biological Studies on New Zirconium(IV Porphyrins with Axial Ligand

    Directory of Open Access Journals (Sweden)

    Gauri D. Bajju

    2013-01-01

    Full Text Available A series of parasubstituted tetraphenylporphyrin zirconium(IV salicylate complexes (SA/5-SSAZr(IVRTPP, R = p-H, p-CH3, p-NO2, p-Cl, SA = salicylate, and 5-SSA = 5-sulfosalicylate have been synthesized, and the spectral properties of free base porphyrins, their corresponding metallated, and axially ligated zirconium(IV porphyrin compounds were compared with each other. A detailed analysis of ultraviolet-visible (UV-vis, proton nulcear magnetic resonance (1H NMR spectroscopy, infrared (IR spectroscopy, and elemental analysis suggested the transformation from free base porphyrins to zirconium(IV porphyrins. The ability of the metal in this complex for extra coordination of solvent molecules was confirmed by ESI-MS spectra. Besides the fluorescence, cyclic voltammetry, and thermogravimetric studies, the complexes were also screened for antimicrobial and anticancer activities. Among all the complexes, 5-SSAZr(p-NO2TPP shows high antibacterial activity.

  20. In situ enzyme aided adsorption of soluble xylan biopolymers onto cellulosic material.

    Science.gov (United States)

    Chimphango, Annie F A; Görgens, J F; van Zyl, W H

    2016-06-05

    The functional properties of cellulose fibers can be modified by adsorption of xylan biopolymers. The adsorption is improved when the degree of biopolymers substitution with arabinose and 4-O-methyl-glucuronic acid (MeGlcA) side groups, is reduced. α-l-Arabinofuranosidase (AbfB) and α-d-glucuronidase (AguA) enzymes were applied for side group removal, to increase adsorption of xylan from sugarcane (Saccharum officinarum L) bagasse (BH), bamboo (Bambusa balcooa) (BM), Pinus patula (PP) and Eucalyptus grandis (EH) onto cotton lint. The AguA treatment increased the adsorption of all xylans by up to 334%, whereas, the AbfB increased the adsorption of the BM and PP by 31% and 44%, respectively. A combination of AguA and AbfB treatment increased the adsorption, but to a lesser extent than achieved with AguA treatment. This indicated that the removal of the glucuronic acid side groups provided the most significant increase in xylan adsorption to cellulose, in particular through enzymatic treatment.