WorldWideScience

Sample records for cycle penentuan kandungan

  1. Penentuan Kadar Asam Lemak Bebas Dari CPO Non Edible Oil Yang Diperoleh Dari Pencampuran CPO Dan PFAD (4 : 1)

    OpenAIRE

    Sri Agustina

    2009-01-01

    Telah dilakukan penentuan kadar asam lemak bebas dari CPO Non Edible Oil dengan menggunakan cara titrasi volumetri. Salah satu parameter yang digunakan dalam analisis mutu produksi adalah kandungan asam lemak bebas (Free Fatty Acid), karena CPO Non Edible Oil ini masih mengandung sejumlah komponen lain yang dapat memenuhi mutu produksi. Dari titrasi ini diperoleh bahwa kadar asam lemak bebas untuk CPO Non Edible Oil adalah 21.87 %. Dari hasil analisis kadar asam lemak bebas CPO Non Edible Oil...

  2. Analisis Penentuan Kandungan Gas Oksigen (O2 Fotosintesis Tanaman Gelombang Cinta (Anthuriumsp Pada Variasi Daya Lampu

    Directory of Open Access Journals (Sweden)

    RR Ersi Nurmaeli

    2015-06-01

    Full Text Available Fotositesis research has been done using a light source at the plant by analyzing the oxygen gas is produced. This study aims to determine the effective power light on the photosynthesis of plants. Gas levels of oxygen as a result of photosynthesis can be seen by using a tool-assisted oxygen sensor logger software pro. Plant sample used was a wave of love (Anthurium sp, aged approximately 5 months the number of leaves 4-5 pieces inserted in a tube or jar is closed. Variations lamp power used is 33 watts, 60 watts and 100 watts. Data were collected for 600 seconds for each lamp power. The resulting oxygen levels on photosynthesis recorded using Pro logger software then exported to Microsoft Excel for graphed. The curve is formed can be used to analyze the relationship between oxygen levels with time at each power lights are used. After curve fitting the data to form done by creating a line equation and R2 to analyze the most effective lamp power to increase the rate of photosynthesis. In this study showed that the greater the power of the lamp, the oxygen levels increased. Increased levels of oxygen means that the amount of oxygen produced during photosynthesis is greater than the amount of oxygen used for respiration. From the comparison of the three lights that have different power and graphed equation of the line, turns on the use lamps with power 66 watt and 100 watt having the largest gradient is 0.001. Mean increase in oxygen levels on both the power of this light is very large, while the gradient equation of a line on the lights with 33 watt power is the same, namely 0.0001. Comparison between the use of power 66 watt lamp has a gradient of 0.001, while the 100-watt power gradient 0.0011 has so increased oxygen levels is the most effective at 100 watts of power. R2 at 66 watts power is 100 watts of power 0.9535 while 0.9899. The conclusion for this study were 1 the greater power of the lights then the higher the rate of photosynthesis, and effective lamp power is 100 watts.

  3. Analisis Penentuan Variabel dari Biaya Kapal Sebagai Acuan Penentuan Subsidi untuk Kapal Perintis :Studi Kasus Maluku

    Directory of Open Access Journals (Sweden)

    Rio Jagarin Silaban

    2012-09-01

    Full Text Available Subsidi diberikan untuk menjembatani ketidak-seimbangan antara harga atau tarip yang ditetapkan produsen dengan kekuatan daya beli konsumen dikarenakan konsumen tersebut tidak dapat membayar sesuai dengan tarip yang ditetapkan. Penelitian ini dimaksudkan untuk mengkaji formula penentuan subsidi saat ini dan mengeloborasi dengan solusi alternatife. Studi dilakukan dengan  menentukan  variabel jarak, yang ada di biaya kapal perintis dan dapat dijadikan sebagai acuan penentuan  subsidi. Hasil penelitian menunjukkan bahwa penentuan subsidi saat ini  hanya ditentukan oleh variabel Jarak saja dan variabel penentu saat ini belum bisa menghitung besaran subsidi dengan lebih objektif karena ada beberapa variabel penentu lainnya yang bisa dijadikan sebagai acuan penentuan subsidi seperti GT, BHP, ABK dan Umur.

  4. Kandungan Komponen Fenolat, Kadar Fenolat Total, dan Aktivitas Antioksidan Madu dari Beberapa Daerah di Jawa dan Sumatera

    Directory of Open Access Journals (Sweden)

    Ichda Chayati

    2015-03-01

    phenolic contents. The best antioxidant activity was found in coffee honey, and this activity did not correlated with its total phenolic contents. Keywords: antioxidant, monofloral honey, phenolic ABSTRAK Latar Belakang. Banyak penyakit yang dapat timbul karena proses degeneratif yang dapat diperlambat dengan adanya sistem antioksidan. Madu merupakan salah satu bahan pangan yang diketahui memiliki aktivitas antioksidan. Tujuan. Penelitian ini bertujuan untuk mengetahui aktivitas antioksidan berbagai jenis madu dari beberapa daerah di Jawa dan Sumatera. Metode. Penelitian laboratorium terhadap empat jenis madu yaitu madu bunga kopi, sawit, randu dan rambutan. Penentuan kandungan komponen fenolat dilakukan dengan High Performance Liquid Chromatography (HPLC dan pengukuran kadar fenolat total dilakukan dengan reagen folin-ciocalteu. Aktivitas antioksidan diukur berdasarkan peredaman radikal bebas 2.2-diphenyl-1-picrylhydrazyl (DPPH dan retensi dalam sistem asam linoleat dengan standar butylated hydroxytoluene (BHT. Analisis statistik dilakukan dengan Analysis of varian (Anova dilanjutkan Duncan’s multiple range test (DMRT. Korelasi antar analisis dilakukan dengan uji korelasi Pearson. Hasil. Keempat jenis madu yang diteliti mempunyai kandungan fenolat berupa asam klorogenat, asam kafeat, asam ρ-koumarat, asam ferulat, pinobanksin, quercetin, luteolin, pinocembrin dan chrysin. Komponen fenolat dominan untuk tiap madu bervariasi tergantung jenis madunya. Kadar fenolat total pada keempat jenis madu antara 2.000 sampai 4.400 ppm. Kandungan fenolat total paling tinggi terdapat pada madu randu, namun aktivitas antioksidan paling tinggi ditunjukkan oleh madu kopi. Urutan besarnya aktivitas antioksidan berturut-turut adalah madu kopi, madu randu, madu sawit, dan madu rambutan. Aktivitas antioksidan yang tinggi tidak berbanding lurus dengan kandungan fenolat totalnya. Kesimpulan. Madu dari beberapa daerah di Jawa dan Sumatera mengandung sembilan senyawa aktif, dengan kadar fenolat

  5. Kandungan Tembaga (Cu dan Timbal (Pb pada Lamun Enhalus accoroides dari Perairan Batam, Kepulauan Riau, Indonesia

    Directory of Open Access Journals (Sweden)

    Ismarti Ismarti

    2017-02-01

    Full Text Available The objective of the present study was to analyze the metal content of copper and lead in Enhalus accoroides seagrass in Batam Island waters. Samples of seagrass (E. accoroides were collected from six locations along the western region of Batam Island then dried and performed with acid destruction. The measurements of Cu and Pb in the samples were conducted by Atomic Absorption Spectrophotometer. The result showed that there was an increasing of copper and lead contaminant level on sample E accoroides during two periods in a year.  The Cu level ranged from 0.63 to 46.1 mg/kg, meanwhile, lead level ranged from  2.14 to 10.52mg/kg respectively. The highest accumulation of copper and lead were recorded on leaves, it was reached 10.81 mg/kg and 5.98mg/kg, respectively. Penelitian ini bertujuan menganalisis kandungan logam tembaga (Cu dan timbal (Pb pada lamun Enhalus accoroides di sepanjang perairan barat Pulau Batam. Sampel lamun dikumpulkan dari enam lokasi  kemudian dikeringkan dan dilakukan destruksi dengan asam. Penentuan kadar logam tembaga dan timbal dalam sampel dilakukan dengan spektrometri serapan atom. Hasil penelitian menunjukan adanya peningkatan kadar logam Cu dan Pb pada sampel lamun E. accoroides selama 2 periode sampling dalam 1 tahun. Kadar logam Cu dan Pb pada lamun secara berturut berada pada rentang 0.63-46.1 mg/kg dan 2.14-10.52mg/kg. Akumulasi logam Cu dan Pb dalam lamun E. accoroides tertinggi pada bagian daun sebanyak 10.81 mg/kg Cu dan 5.98 mg/kg Pb.

  6. PERENCANAAN AGREGAT HEURISTIK UNTUK PENENTUAN SUMBER DAYA YANG OPTIMAL

    Directory of Open Access Journals (Sweden)

    Jevi Rosta

    2013-04-01

    Full Text Available Perencanaan agregat merupakan hal yang sangat penting dalam penentuan sumber daya serta penentuan biaya dalam proses produksi. Dengan perencanaan agregat metode heuristik, perusahaan dapat menentukan tingkat produksinya untuk memenuhi permintaannya melalui alokasi tenaga kerja, persediaan dan subkontrak atau kombinasi antara beberapa alternatif (hibrid. Dalam penelitian ini, dilakukan perencanaan untuk 4 alternatif yaitu variasi tenaga kerja, persediaan, subkontrak dan kombinasi lembur dan persediaan. Dan diperoleh hasil bahwa variasi tenaga kerja adalah alternatif yang terbaik dengan biaya yang paling minimum.

  7. PENDIDIKAN AGAMA ISLAM DALAM KANDUNGAN: Tinjauan dari Aspek Metodologi

    Directory of Open Access Journals (Sweden)

    Chaeruddin B Chaeruddin B

    2015-12-01

    Full Text Available Abstract: Some researches done by the expert prove that the prenatal child have been able to be stimulated from the outside since Allah blew into him His spirit. In Qur’an surah al-A’raf verse 127 it is shown that prenatal baby can be able to communicate with the God as stated in His testimony that Allah is God. This means that the prenatal baby has been able to be educated. Broadly speaking there are two ways to educate prenatal baby. The first is by supplying nutritious and lawful food through his mother so the child can grow up healthy and smart. The second is parents, and even people around him should behave well and avoid bad deeds so that the baby can be a pious child as its Fitrah. Abstrak: Berbagai hasil penelitian para ahli membuktikan bahwa anak dalam kandungan sudah dapat menerima rangsangan dari luar, terutama bayi yang telah ditiupkan roh kepadanya. Dalam QS al-A’raf/7: 172, digambarkan bahwa bayi mampu berkomunikasi dengan Tuhan menyatakan kesaksiannya bahwa Allahlah Tuhannya. Dengan dasar itu, anak dalam kandungan sudah dapat dididik. Yang sangat berperan mendidik anak dalam kandungan adalah ibunya dibantu oleh ayahnya. Secara garis besar ada dua cara mendidik anak dalam kandungan yaitu: 1 Menyuplai makanan bergizi (baik dan halal kepada bayi melalui ibunya sehingga anak dalam kandungan dapat berkembang menjadi sehat dan cerdas. 2 Ibu dan ayahnya, bahkan orang-orang di sekitarnya harus berperilaku yang baik dan menghindari perbuatan-perbuatan yang jelek, agar anak dapat berkembang menjadi anak saleh sesuai fitrahnya.

  8. ALTERNATIF CARA DETEKSI KANDUNGAN IODIUM PADA GARAM BERIODIUM DI PASAR

    Directory of Open Access Journals (Sweden)

    Yuniar Rosmalina

    2012-11-01

    Full Text Available Mengingat tingginya biaya yang diperlukan dalam menganalisa kandungan iodium pada garam secara laboratorium, serta pentingnya partisipasi masyarakat dalam penanggulangan masalah gangguan akibat kekurangan iodium, maka diperlukan teknologi sederhana untuk mendeteksi iodium pada garam iodium yang diperjualbelikan di pasar. Untuk itu telah dilakukan penelitian mengenai beberapa cara mendeteksi iodium pada garam menggunakan sumber karbohidrat dan sumber zat pereduksi, seperti Dioscorea Hispida Dennst (gadung, Manihot utilissima (singkong, atau Rubber seed (biji karet. Berdasarkan jenis dan jumlah campuran yang digunakan ada 6 formula yang diuji pada penelitian pendahuluan yaitu formula ICo, IICo, IC1, IIC1, ISo, dan IISo. Pada penelitian lanjutan, formula yang terpilih diuji menggunakan garam iodium yang dibeli dari pasar di Kodya Bogor. Hasil penelitian menunjukkan bahwa formula IICo dan IIC1 menggunakan perasan singkong atau gadung, serta formula IISo menggunakan parutan biji karet, dapat digunakan sebagai alat untuk mendeteksi kadar iodium pada garam beriodium. Formula IICo terdiri dari 4 ml perasan gadung atau singkong, dicampur dengan 45 g garam beriodium dan 8 ml asam cuka 25 persen. Formula IIC1 sama seperti formula IICo, tapi menggunakan gadung yang telah disimpan tiga minggu, dan singkong yang telah disimpan dua minggu. Formula IISo terdiri dari 7 gr parutan biji karet, ditambah dengan 45 g garam iodium dan 16 ml asam sitrat. Hasil penelitian lanjutan menunjukkan hanya 11.1 persen garam beriodium di Kodya Bogor mempunyai kandungan diatas 30 ppm, dan 88.9 persen dibawah 30 ppm. Garam beriodium yang mempunyai kandungan di atas 30 ppm akan menunjukkan warna biru atau ungu, dan yang mempunyai kandungan dibawah 30 ppm akan menunjukkan warna cokelat, warna biru yang tidak stabil atau tidak menunjukkan perubahan warna.

  9. Pengaruh Kandungan Uranium Dalam Umpan Terhadap Efisiensi Pengendapan Uranium

    OpenAIRE

    Torowati

    2010-01-01

    PENGARUH KANDUNGAN URANIUM DALAM UMPAN TERHADAP EFISIENSI PENGENDAPAN URANIUM. Setiap aktivitas analisis di Laboratorium Kendali Kualitas, Bidang Bahan Bakar Nuklir selalu dihasilkan limbah radioaktif cair. Limbah radioaktif cair di laboratorium masih mengandung uranium yang cukup besar ± 0,600 g U/l dengan keasamaan yang cukup besar pula. Karena uranium mempunyai nilai ekonomis yang cukup tinggi maka perlu USAha untuk mengambil kembali uranium tersebut. Pada kegiatan ini telah dilak...

  10. PENGARUH PENENTUAN JUMLAH PEMESANAN PADA BULLWHIP EFFECT

    Directory of Open Access Journals (Sweden)

    Puji Lestari

    2017-03-01

    Full Text Available Bullwhip effect adalah suatu kondisi dimana terjadi peningkatan variasi permintaan dalam suatu rantai pasok. Bullwhip effect ini dapat diakibatkan oleh beberapa faktor salah satunya yaitu jumlah pemesanan. Jumlah pemesanan yang dilakukan oleh masing-masing pemasok akan mempengaruhi jumlah pemesanan pada pemasok yang lain. Perbedaan jumlah pemesanan antar pemasok ini akan menimbulkan bullwhip effect. Penelitian ini akan menunjukkan pengaruh penentuan jumlah pemesanan terhadap bullwhip effect dengan menggunakan metode Silver Meal dan Lot For Lot. Hasil yang diperoleh diukur dengan melihat perbedaan biaya per unit pada keseluruhan rantai pasok. Hasil penelitian menunjukkan bahwa pihak pembeli lebih baik menggunakan metode Silver Meal karena variasi permintaan masih mewakili permintaan yang sebenarnya sedangkan pada pihak penjual lebih baik menggunakan Lot For Lot karena variasi permintaan sudah tidak dapat mewakili permintaan sebenarnya. Penggunaan metode Lot For Lot pada pihak penjual menyebabkan variasi permintaan yang sudah tidak mewakili permintaan sebenarnya tidak diperhitungkan. Abstract Bullwhip effect is the increased variability of demand in supply chain. Order quantity could be a factor that cause bullwhip effect. Deciding order quantity by an actor in supply chain will affect the order quantity by the other actors. Different order quantity is known as bullwhip effect. This research will show the effect of lot sizing, Silver Meal and Lot For Lot, on bullwhip effect. The result could be seen on the cost per unit in supply chain. The result shows that Silver Meal is better used by a buyer because demand variation could present the real demand, while Lot For Lot is better used by a seller because demand variation could not present the real demand. Using Lot For Lot causes the demand variation is not included.

  11. PROSES PENENTUAN HARGA JUAL PADA RUMAH MAKAN CITRA MINANG DI MAKASSAR

    OpenAIRE

    SULPA, NADYLAH

    2015-01-01

    2015 Proses Penentuan Harga Jual Pada Rumah Makan Citra Minang di Makassar The Process of Determining the Selling Price at Citra Minang Restaurant in Makassar Nadylah Sulpa Abdul Hamid Habbe Darmawati Penelitian ini bertujuan untuk mengetahui proses penentuan harga jual menurut Rumah Makan Citra Minang dan nilai harga jual produk bila dihitung menggunakan metode cost plus pricing. Data penelitian ini diperoleh dari data...

  12. ALGORITMA ESTIMASI KANDUNGAN KLOROFIL TANAMAN PADI DENGAN DATA AIRBORNE HYPERSPECTRAL

    Directory of Open Access Journals (Sweden)

    Abdi Sukmono

    2015-02-01

    Full Text Available Klorofil merupakan pigmen yang paling penting dalam proses fotosintesis. Tanaman sehat yang mampu tumbuh maksimum umumnya  memiliki jumlah klorofil yang lebih besar daripada tanaman yang tidak sehat. Dalam Estimasi kandungan klorofil tanaman padi dengan airborne hyperspectral dibutuhkan algoritma khusus untuk mendaaptkan akurasi yang baik. Objek dari penelitian ini mengembangkan reflektan in situ menjadi model algoritma   estimasi kandungan klorofil tanaman padi untuk airborne hyperspectral.  Dalam penelitian ini beberapa indeks vegetasi seperti normalized difference vegetation index (NDVI, modified simple ratio (MSR  , modified/transformed chlorophyll absorption ratio index (MCARI, TCARI dan bentuk integrasi (MCARI/OSAVI and TCARI/OSAVI digunakan untuk membentuk model estimasi dengan metode regresi linear. Selain itu juga digunakan  Blue/Green/Yellow/Red Edge Absorption Clhorophyll Index. Dari proses regresi di dapatkan tiga ground model yang mempunyai korelasi kuat (R2≥0.5 terhadap klorofil tanaman padi. Ketiga model tersebut yaitu MSR (705,750 dengan R2 sebesar 0.51, TCARI/OSAVI (705, 750 dengan R2 sebesar 0.52 dan REACL 2 dengan R2 sebesar 0.57. Dari ketiga tersebut dipilih groun model terbaik REACL 2 untuk di upscalling ke model algoritma airborne hyperspectral.  Pembentukan algoritma dengan data airborne hyperspectral sensor Hymap dan REACL 2 menghasilkan model algoritma ( Klorofil (SPAD unit = 3.031((B22-B18/(B18-B13 + 31.596 dengan R2 sebesar 0.78

  13. Pertumbuhan Prenatal dalam Kandungan Kambing Melalui Superovulasi

    Directory of Open Access Journals (Sweden)

    ADRIANI

    2007-06-01

    Full Text Available Thirty six Etawah-grade does (BW 20.4-44.2 kg, age 2.5-7 years were used to study the efficacy of increasing secretion of endogenous hormones of pregnancy by superovulation of does to stimulate of growth prenatal in uterus. The does were injected with pregnant mare serum gonadotrophin (PMSG, 0 IU/kg BW [grouped into nonsuperovulation-NSO] and 15 IU/kg BW [grouped into Superovulation-SO]. Intravaginal sponge (60 mg medroxyprogesterone acetate was applied for 14 days to synchronize estrus cycle. Twenty four hours prior to sponge removal, PMSG was injected to stimulate superovulation. After sponge removal, five experimental does were mixed with one buck for natural mating. Superovulation prior to mating increased number of corpora lutea, mean of maternal serum estradiol concentration, progesterone concentration, litter size, average birth weight and average milk yield, by 112, 67, 42, 27, 32, and 35%, respectively. Those were correlated with the increase of uterine, corpora lutea, and individual birth weight.

  14. PENENTUAN RECEIVED DATE DENGAN LOAD-ORIENTED MANUFACRURING CONTROL

    Directory of Open Access Journals (Sweden)

    Sri Hartini

    2012-02-01

    Full Text Available Salah satu kunci kompetitif sebuah perusahaan make to order adalah ketepatan dalam pemenuhan waktu penerimaan pesanan pada konsumen yang telah dijanjikan perusahaan ( received date. Penentuan received date yang selama ini dilakukan oleh JI  kurang tepat karena hanya memperkirakan waktu sekitar 10 – 12 minggu tanpa mempertimbangkan faktor produksi. Penelitian ini merancang received date dengan model load-oriented manufacturing control dimana penentuan received date didasarkan pada perhitungan manufacturing lead time yang mempertimbangkan waktu pengiriman order ke konsumen, kapasitas yang tersedia pada tiap stasiun kerja, waktu proses pada stasiun kerja dan aliran produksi di lantai produksi. Hasil validasi perhitungan  penentuan received date order sesuai  dengan sistem produksi PT JI dan lebih valid dibanding sistem awal. Kata kunci : make to order, received date, manufacturing leadtime, load-oriented manufacturing control   One of the competitive key of a make to order company is the accuracy in fulfilling orders which has been promised by the company towards the consumers (received date. Determining received date which has been applied by JI recently is not sufficient because it only predicts 10-12 weeks of time without considering production factors. This research designs received date with load-oriented manufacturing control model where determining received date is based on calculating manufacturing lead time that considers the time needed to deliver orders to the consumer, capacity available for each work station, work station process time, and production flow within the production floor.  Validation results from the calculations for determining received date order is adjusted to PT JI  production system and is more valid than the first system. Keywords : make to order, received date, manufacturing leadtime, load-oriented manufacturing control

  15. Penentuan Arah Teleskop Digital Melalui Komunikasi Wi-Fi

    Directory of Open Access Journals (Sweden)

    Prima Kurniawan

    2013-09-01

    Full Text Available Teleskop bintang adalah sebuah perangkat instrument yang digunakan untuk melihat benda-benda langit yang jaraknya sangat jauh menjadi terasa dekat. Teleskop yang tersedia pada umumnya belum dilengkapi dengan sistem digital untuk pencitraannya dan otomatisasi untuk penentuan arahnya. Pada tugas akhir ini dibuat suatu sistem digital dan otomatisasi pada teleskop konvensional. Sistem digital digunakan untuk perekaman hasil yang didapatkan oleh teleskop dan ditampilakan pada komputer. Sistem otomatisasi dibuat untuk menentukan pergerakan sudut teleskop dengan sebuah GUI. Mekanik pergerakan teleskop diberikan 2 motor dc sebagai penggerak. Masing-masing motor dc berfungsi untuk menggerakkan tiap sumbu X dan sumbu Y. Digunakan sebuah sistem mikrokontroler menggunakan ATmega 32 sebagai pengolahan data. Fitur ADC mikrokontroler digunakan untuk mengubah data analog perubahan tegangan yang terjadi pada potensiometer menjadi perubahan data digital yang akan dikonversi menjadi nilai pergerakan perubahan sudut. Sistem ini ditambahkan sebuah router yang berfungsi sebagai akses poin untuk jalur pengiriman dan penerimaan data antara komputer dengan mikrokontroler. Ditambahkan sebuah wiznet yang mampu mengkonversi data dari komunikasi serial ke data protokol TCP/IP dan sebaliknya. Pengujian pergerakan sudut sumbu X dilakukan pada sudut 0, 45, 90, 135, 180, 255, 270, 315, dan 360 sedangkan pergerakan sumbu Y dilakukan pada sudut 0, 10, 20, 30, 40, 50, 60, 70, 80, dan 90. Hasil pengujian pada sumbu X dan Y didapatkan beberapa error pada titik-titik tertentu dengan tingkat kesalahan mencapai 3.8% untuk sumbu x dan 2.5% untuk sumbu y. Penentuan pergerakan sudut dilakukan melalui komputer dengan menggunakan komunikasi wi-fi.

  16. Kandungan logam berat dalam sedimen di Perairan Teluk Wawobatu, Kendari, Sulawesi Tenggara

    Directory of Open Access Journals (Sweden)

    Edward

    2014-08-01

    Full Text Available Pengamatan kandungan logam berat dalam sedimen di Perairan Teluk Wawobatu, Kendari telah dilakukan pada bulan Juni 2011. Contoh sedimen diambil dengan menggunakan gravity core pada 5 stasiun penelitian. Kandungan logam berat diukur dengan menggunakan Spektrofotometer Serapan Atom (SSA. Tujuan penelitian ini adalah untuk mengetahui kandungan logam berat dalam sedimen serta memprediksi kualitas sedimen berdasarkan pendekatan analisis indeks (Indeks geoakumulasi dan Indeks Beban Pencemaran. Hasilnya menunjukkan, kandungan Pb berkisar 3,704-21,892 ppm, Cd 0,784-1,385 ppm, Cu 3,451-12,193 ppm, Zn 24,838-69,973 ppm, dan Ni 37,289-72,329 ppm. Kandungan ke lima logam tersebut masih lebih rendah dari nilai ambang batas yang ditetapkan oleh Kantor Menteri Negara Lingkungan Hidup 2010 dan baku mutu sedimen Ontario (Ontario Sediment Guideline 2008. Kandungan logam berat dalam sedimen di Stasiun 4 lebih tinggi dibandingkan dengan Stasiun lainnya. Hal ini disebabkan oleh perbedaan tekstur sedimen di masing-masing stasiun. Stasiun 4 berada di muara sungai dan mempunyai sedimen dengan tekstur berupa lumpur berwarna hitam. Kandungan logam Ni lebih tinggi dibandingkan dengan yang lain, hal ini menunjukkan adanya masukan sedimen dari Teluk Kendari dan Teluk Lasolo yang terbawa oleh arus, disamping yang berasal dari darat yang masuk melalui aliran sungai. Berdasarkan nilai indeks geoakumulasi (I-geo sedimen di perairan ini termasuk kategori tidak tercemar oleh Pb, Cu, Zn, dan Ni (I_geo<0, dan tercemar sedang oleh Cd (1

  17. MUTU FISIK, FISIOLOGIS, DAN KANDUNGAN BIOKIMIA BENIH TREMA (Trema orientalis Linn. Blume BERDASARAN TINGKAT KEMASAKAN BUAH

    Directory of Open Access Journals (Sweden)

    Naning Yuniarti

    2016-12-01

    Full Text Available Trema (Trema orientalis Linn. Blume merupakan tanaman serba guna karena semua bagian pohon dapat digunakan. Dalam pengembangan tanaman ini, diperlukan benih bermutu, dimana salah satu syarat untuk menentukan benih bermutu adalah benih harus berasal dari buah yang sudah masak fisiologis. Tujuan penelitian adalah mengetahui mutu fisik, mutu fisiologis, dan kandungan biokimia (lemak, karbohidrat dan protein benih trema berdasarkan tingkat kemasakan buah. Benih trema yang digunakan berasal dari Badung, Bali. Buah trema dikelompokkan menjadi 3 warna (hijau, coklat, hitam. Rancangan penelitian menggunakan Rancangan Acak Lengkap dengan parameter yang diamati : ukuran buah dan benih, berat buah dan benih, kadar air buah dan benih, kandungan biokimia (protein, lemak, karbohidrat, daya berkecambah, dan kecepatan berkecambah. Hasil penelitian menunjukkan : (1 Tingkat kemasakan buah berpengaruh nyata terhadap mutu fisik (ukuran buah dan benih, berat buah dan benih, kadar air buah dan benih, fisiologis (daya berkecambah, kecepatan berkecambah, dan kandungan biokimia (lemak, karbohidrat, protein benih trema, (2 Mutu fisik dan fisiologis benih yang berasal dari buah yang berwarna hitam lebih baik dibandingkan dengan buah berwarna hijau dan coklat, (3 Kandungan lemak, karbohidrat dan protein benih trema berbeda dari masing-masing tingkat kemasakan (hijau, coklat, hitam, (4 Buah trema yang sudah mencapai masak fisiologis adalah buah berwarna hitam, dengan kriteria yaitu : panjang buah 3,87 ± 0,05 mm dan lebar 3,41 ± 0,02 mm; panjang benih 2,10 ± 0,05 mm dan lebar 1,81 ± 0,06 mm; berat 1000 butir buah 25,6883 gr; berat 1000 butir benih 3,8288 gr; kadar air buah 54,74%; kadar air benih 12,03%; daya berkecambah 78%; kecepatan berkecambah 3,05%/Etmal; kandungan karbohidrat 20,10%; kandungan protein 2,84%; kandungan lemak 0,65%.

  18. APLIKASI TEKNIK AAN DI REAKTOR RSG-GAS PADA PENENTUAN UNSUR ESENSIAL DAN TOKSIK DI DALAM IKAN DAN PAKAN IKAN

    Directory of Open Access Journals (Sweden)

    Saeful Yusuf

    2015-03-01

    Full Text Available Pada makalah ini diuraikan tentang aplikasi teknik AAN (Analisis Aktivasi Neutron dalam penentuan konsentrasi unsur-unsur esensial dan cemaran yang terkandung di dalam beberapa spesies ikan dan pakan ikan. Unsur-unsur esensial yang terkandung dalam pakan ikan buatan juga dianalisis untuk mengetahui pengaruhnya terhadap ikan. Penentuan unsur menggunakan teknik AAN dengan metode perbandingan dan metode k0-AAN. Sampel diiradiasi di reaktor RSG-GAS yang memiliki fluks neutron thermal 5 x 1013 n.cm-2.s-1 pada daya 15 MW. Hasil penelitian menunjukkan bahwa 12 unsur di dalam 11 spesies ikan air laut dan air tawar telah ditentukan yaitu As, Br, Cr, Co, Cs, Fe, Hg, K, Na, Rb, Se and Zn. Konsentrasi cemaran As didalam ikan laut sudah melampaui batas maksimum 1 mg/kg, sedangkan konsentrasi cemaran Hg masih dibawah batas maksimum 0,5 mg/kg, baik untuk ikan laut maupun ikan air tawar. Unsur K dan Na merupakan unsur makroesensial sedangkan unsur Cr, Co, Fe, Se and Zn adalah termasuk unsur mikroesensial. Secara umum ditunjukkan bahwa kandungan mineral didalam ikan laut lebih tinggi konsentrasinya dibandingkan ikan air tawar. Br, Cs dan Rb merupakan unsur-unsur non esensial yang teridentifikasi dalam semua ikan yang dianalisis. Penelitian terhadap pakan ikan air tawar menunjukkan bahwa semua unsur yang teridentifikasi juga terdapat di dalam ikan laut dan ikan air tawar. Hal ini menunjukkan bahwa pakan ikan berkontribusi terhadap konsentrasi unsur di dalam ikan air tawar. Kata kunci : Analisis aktivasi neutron, unsur esensial, unsur cemaran, ikan, pakan ikan   This paper reported on the application of NAA (Neutron Activation Analysis Technique in the determination of the concentration of the essential and toxic elements in some species of fish and fish feed. Determination of elements using instrumental NAA technique with comparison and k0-INAA methods. Samples were irradiated in the RSG-GAS which has a thermal neutron flux  5.0E +13 ncm-2s-1. The results

  19. PENGARUH VARIETAS DAN SISTEM BUDIDAYA TERHADAP PERTUMBUHAN, PRODUKSI, DAN KANDUNGAN GIZI JAGUNG (ZEA MAYS L.

    Directory of Open Access Journals (Sweden)

    Yukarie Ayu Wulandari

    2016-06-01

    Full Text Available Jagung merupakan bahan pangan yang berpotensi untuk dikembangkan sebagai pangan lokal, pakan, dan bahan baku industri. Mengingat pentingnya jagung, maka perlu adanya upaya untuk peningkatan produktivitasnya. Penelitian bertujuan untuk mengetahui pengaruh varietas dan sistem budidaya terhadap pertumbuhan, produksi, dan kandungan gizi jagung. Penelitian menggunakan Rancangan Petak Terbagi dengan petak utama varietas (Srikandi Putih-1 dan Srikandi Kuning-1 dan anak petak sistem budidaya (organik dan inorganik yang diulang lima kali. Hasil menunjukkan bahwa varietas Srikandi Putih-1 memberikan hasil tertinggi pada tinggi tanaman, jumlah daun, luas daun, lingkar batang, pati, dan vitamin A. Varietas Srikandi Kuning-1 memberikan hasil tertinggi pada produksi, protein dan lemak. Sistem budidaya inorganik memberikan hasil tertinggi pada tinggi tanaman, jumlah daun, panjang tongkol, bobot bersih tongkol, bobot pipilan kering, bobot 100 butir, konversihasil/ha, patidan protein. Interaksi varietas Srikandi Putih-1 dengan sistem budidaya organik memberikan hasil tertinggi terhadap jumlah daun, lingkar batang dan kandungan vitamin A. Varietas Srikandi Kuning-1 yang dibudidayakan secara inorganik memberikan hasil tertinggi terhadap bobot bersih tongkol, bobot pipilan kering, bobot 100 butir, konversi hasil ha-1 dan kandungan protein. Kandungan pati tertinggi pada varietas Srikandi Putih-1 yang dibudidayakan secara inorganik, sedangkan kandungan lemak tertinggi pada varietas Srikandi Kuning-1 yang dibudidayakan secara organik.

  20. ANALISIS KANDUNGAN GARAM GUNUNG ASAL KRAYAN KABUPATEN NUNUKAN KALIMANTAN TIMUR

    Directory of Open Access Journals (Sweden)

    Herman Herman

    2012-06-01

    Full Text Available Has been studied composition of mountain salt from Krayan, Nunukan, East Kalimantan. This study aims to determine the composition of the minerals contained in the  mountain salt. Mountain salt is obtained from wells Krayan District residents were further prepared for analysis using a technique using Atomic Absorption Spectrometer (AAS, further by looking at the pattern of X-ray Diffraction (XRD and Scanning electron microscopic (SEM. Based on the results obtained AAS has identified mineral deposits include: Na, K, Mg, Al, Cu, Zn, Fe, Ba, and Sr. From the results of XRD shows that the main peak of the salt Krayan shows major peaks for NaCl crystals with impurities such as KCl, CaCl2, MgCl2, and AlCl3. SEM observation showed that morphology of Krayan salt have cube shape which is the shape of NaCl crystals with space group Fm3m and lattice parameter (a 5.620 Å Keywords : Mountain Salt, krayan, AAS, XRD, SEM   Abstrak Telah dilakukan penelitian analisis kandungan garam gunung asal Krayan Kabupaten Nunukan Kalimantan Timur. Penelitian ini bertujuan untuk mengetahui komposisi mineral yang terkandung dalam garam gunung. Garam gunung diperoleh dari sumur warga Kecamatan Krayan yang selanjutnya dipreparasi untuk dianalisis dengan menggunakan menggunakan teknik Spektrometer Serapan Atom (SSA, selanjutnya dengan melihat pola Difraksi Sinar X (XRD, dan Scanning Elektron Microscopy (SEM. Berdasarkan hasil SSA telah diidentifikasi diperoleh kandungan mineral antara lain: Na, K, Mg, Al, Cu,  Zn, Fe, Ba, dan Sr. Dari hasil XRD terlihat bahwa puncak utama dari  garam krayan tersebut menunjukkan puncak utama untuk Kristal NaCl, dengan impurities antara lain KCl, CaCl2, MgCl2, dan AlCl3. Selain itu hal ini didukung pula oleh pengamatan SEM, bahwa morfologi SEM garam krayan memperlihatkan bentuk kristal kubus yang merupakan  bentuk dari  Kristal NaCl  dengan  grup ruang  Fm3m  dengan panjang  kisi kristal 5,620 Å. Kata Kunci : Garam Gunung, Krayan

  1. PERFORMANS KELINCI LOKAL (Lepus nigricollis YANG DIBERI RANSUM DENGAN KANDUNGAN ENERGI BERBEDA

    Directory of Open Access Journals (Sweden)

    I M. NURIYASA

    2014-06-01

    Full Text Available Penelitian ini bertujuan untuk mengetahui performans kelinci jantan lokal (Lepus nigricollis yang diberi ransum dengan kandungan energi termetabolis berbeda. Percobaan dilaksanakan dengan menggunakan Rancangan Acak Kelompok (RAK dengan empat perlakuan dan empat ulangan. Perlakuan dalam penelitian ini adalah: ransum dengan kandungan energi termetabolis 2200 K.kal/kg (R1, 2500 K.kal/kg (R2, 2800 K.kal/kg (R3 dan 3100 K.kal/kg (R4. Ransum dibuat iso protein dengan kandungan protein kasar 16%. Kelinci yang dipergunakan adalah kelinci jantan lokal lepas sapih dengan umur 4-5 minggu. Variabel yang diamati adalah koefisien cerna bahan kering, efisiensi perubahan GE menjadi DE, berat badan akhir, konsumsi ransum, pertambahan berat badan dan konsumsi air minum. Tidak terjadi perbedaan yang nyata (P>0,05 pada perlakuan ransum terhadap variabel koefisien cerna bahan kering, efisiensi perubahan GE menjadi DE dan konsumsi air minum. Kelinci yang mendapat perlakuan ransum R1 menghasilkan berat badan akhir paling rendah yang berbeda nyata (P0,05 dibandingkan dengan R4. Nilai konversi ransum pada kelinci yang mendapat perlakuan R1 paling tinggi yang berbeda nyata (P<0,05 dibandingkan dengan R2, R3 dan R4. Dari hasil penelitian dapat disimpulkan bahwa ransum dengan kandungan energi termetabolis 2800 K.kal/kg (R3 menghasilkan performans lebih tinggi daripada 2200 K.kal/kg (R1, 2500 K.kal/kg (R2 dan 3100 K.kal/kg (R4.

  2. ALGORITMA K-MEDOIDS UNTUK PENENTUAN STRATEGI PEMASARAN PRODUK

    Directory of Open Access Journals (Sweden)

    Wiwit Agus Triyanto

    2015-04-01

    Full Text Available ABSTRAK Strategi pemasaran produk merupakan hal yang sangat penting bagi perusahaan dimana strategi pemasaran merupakan pendekatan pokok yang digunakan oleh unit bisnis dalam mencapai sasaran yang di dalamnya tercantum keputusan-keputusan mengenai target pasar, penempatan produk, bauran pemasaran, serta tingkat biaya pemasaran yang diperlukan. Untuk dapat melakukan strategi pemasaran produk yang lebih efektif dan effisien, maka perlu dilakukan pengolahan data penjualan. Metode pengolahan data seperti ini sering disebut sebagai data mining. Pada penelitian ini akan menggunakan algoritma K-Medoids untuk pengelompokan data penjualan, sehingga akan ditemukan informasi yang dapat digunakan untuk penentuan strategi pemasaran produk yang tepat. Hasil dari penelitian ini menghasilkan 5 cluster dengan cluster pertama terdiri dari 909 record transaksi, cluster kedua terdiri dari 166 record transaksi, cluster ketiga terdiri dari 66 record transaksi, cluster keempat terdiri dari 132 record transaksi, cluster kelima terdiri dari 87 record transaksi. Strategi pemasaran produk dapat dilakukan dengan melakukan promosi pada cluster kelima yang memiliki kombinasi jumlah barang dibeli yang paling tinggi Kata kunci: strategi, pemasaran, produk, cluster, k-medoids.

  3. SEBARAN KANDUNGAN LOGAM BERAT Cd PADA SEDIMEN DI MUARA SUNGAI WAY KUALA BANDAR LAMPUNG

    Directory of Open Access Journals (Sweden)

    Diky Hidayat

    2012-05-01

    Full Text Available Penelitian penentuan penyebaran konsentrasi logam berat Cd pada sedimen di muara sungai Way Kuala telah dilakukan. Tujuan penelitian ini adalah untuk melihat penyebaran konsentrasi logam berat pada sedimen di muara tersebut. Konsentrasi Cd ditentukan dengan menggunakan spektrofotometer serapan atom (SSA, dengan menggunakan empat validasi metode yaitu batas deteksi, presisi, akurasi, dan linieritas. Hasil menunjukkan bahwa konsentrasi logam berat Cd dalam sampel sedimen di hulu, badan, dan hilir dari muara sungai Way Kuala berada dalam kisaran 20.73 ± 0.18 sampai 23.00 ± 0.81 ppm diatas kualitas standar sedimen (0.65 sampai 2.49 ppm yang telah ditetapkan oleh National Sediment Quality Survey USEPA pada tahun 2004. Validasi metode pada penentuan logam berat Cd dalam sedimen menunjukkan presisi dengan nilai simpangan baku relatif lebih kecil dari 5% (RSD <5%; akurasi 80-120%; batas deteksi dan koefisien korelasi pada logam Cd sebesar 0.01 dan 0.998.

  4. PENGGUNAAN SECONDARY SURVEILLANCE RADAR UNTUK PENENTUAN POSISI PESAWAT UDARA

    Directory of Open Access Journals (Sweden)

    Akhmad Hafidz Irfandi

    2015-02-01

    Full Text Available Republik Indonesia merupakan negara kepulauan terbesar di dunia yang memiliki lebih dari 17.000 pulau dengan pertumbuhan demografi yang sangat pesat, hal ini menjadikan Indonesia sebagai negara berpenduduk terbesar ke-empat di dunia. Pesawat udara merupakan alat transportasi yang paling efektif dalam mendukung mobilitas penduduk.Navigasi atau pandu arah adalah penentuan kedudukan (position dan arah perjalanan baik di medan sebenarnya atau di peta. Navigasi ini dilakukan pada pesawat udara yang dipandu dari darat melalui sinyal yang dipancarkan oleh instrumen terpasang pada menara (ground base maupun sinyal dari satelit (satellite base.Dalam navigasi ada beberapa macam radar yang umum digunakan yaitu Primary Surveillance Radar (PSR dan Secondary Surveillance Radar (SSR.Kedua jenis radar baik PSR maupun SSR mempunyai cara kerja berbeda. Pada PSR sifatnya aktif dan pesawat yang ditargetkan sifatnya pasif.Karena PSR hanya menerima pantulan gelombang radio dari refleksi pesawat tersebut (echo.Sedangkan pesawat itu sendiri tidak ikut aktif dengan pancaran sinyal radar di bawah. Pada SSR, baik radar maupun pesawat kedua-duanya aktif. Hal ini dapat dilakukan karena pesawat terbang telah dilengkapi dengan transponder. Pesawat-pesawat yang tidak dilengkapi transponder tidak akan dapat dilihat pada radar scope seperti identifikasi pesawat, ketinggiannya, dan lain-lain.SSR merupakan peralatan untuk mendeteksi dan mengetahui posisi dan data target yang ada di sekelilingnya secara aktif, dimana pesawat ikut aktif jika menerima pancaran sinyal Radio Frequency (RF radar sekunder. Pancaran radar ini berupa pulsa-pulsa mode, pesawat yang dipasangi transponder, akan menerima pulsa-pulsa tersebut dan akan menjawab berupa pulsa-pulsa code ke sistem penerima radar.

  5. Studi Identifikasi Kandungan Formalin pada Ikan Pindang di Pasar Tradisional dan Modern Kota Semarang

    OpenAIRE

    Sitiopan Telaumbanua, Henny Putri

    2012-01-01

    Ikan pindang adalah salah satu jenis makanan olahan yang dikonsumsi masyarakat dan harus segera dijual karena daya tahan yang terbatas dan akan cepat membusuk. Penggunaan formalin sebagai pengawet ternyata telah disalahgunakan oleh pihak-pihak yang tidak bertanggungjawab, dengan cara menggunakan formalin tersebut sebagai bahan pengawet dalam industri makanan. Penelitian ini bertujuan untuk mengidentifikasi kandungan formalin pada ikan pindang yang dijual di pasar tradisional dan modern Kota S...

  6. Kandungan Inulin Dari Umbi Dahliasp Yang Ditanam Pada Jenis Tanah Vertisol, Inceptisol Dan Andisol

    OpenAIRE

    Iskandar, Yetti Mulyati; Pudjiraharti, Sri; Ratnaningrum, Diah

    2014-01-01

    Tujuan dari penelitian ini adalah menentukan kandungan inulin dari umbi Dahlia sp yang ditanam didaerah sejuk seperti Cianjur, Lembang dan Sukabumi pada jenis tanah yang berbeda dalam rangka rencana produksi di Jawa Barat. Inulin adalah oligosacharida yang terjadi secara alami dengan komposisi gabungan fruktooligosacharida dari oligomer dengan derajat polimerisasi yang berbeda. Umbi dahlia dari bunga berwarna ungu, merah, kuning dan putih yang ditanam di tiga lokasi digunaka...

  7. Kandungan Prinsip Konservatisme dalam Standar Akuntansi Keuangan Berbasis IFRS (International Financial Reporting Standard)

    OpenAIRE

    Ahmad Juanda

    2012-01-01

    Kandungan Prinsip Konservatisme DalamStandar Akuntansi Keuangan Berbasis IFRS(International Financial Reporting Standard)Ahmad JuandaStaf Pengajar Jurusan Akutansi, Fakultas Ekonomi dan BisnisUniversitas Muhammadiyah This study aims to reveal the content of the principle of conservatism contained in financial accounting standards (GAAP) results of the convergence of International Financial Reporting Standards (IFRS). The use of the principle of conservatism still...

  8. Efek Durasi Pencahayaan Pada Sistem HRAR Untuk Menurunkan Kandungan Minyak Solar Dalam Air Limbah

    Directory of Open Access Journals (Sweden)

    Dian Puspitasari

    2014-09-01

    Full Text Available Kandungan minyak di dalam air limbah industri perminyakan umumnya bersifat toksik terhadap mikroorganisme dan mengganggu proses pengolahan secara biologis. Sistem HRAR diperkirakan dapat mengatasi hambatan tersebut melalui proses fotosintesis untuk menghasilkan oksigen yang dibutuhkan mikroorganisme dalam mendegradasi senyawa hidrokarbon. Penelitian ini bertujuan mengkaji pengaruh perpanjangan waktu pencahayaan pada kemampuan HRAR dalam menurunkan kandungan minyak di dalam limbah. Variabel yang digunakan pada penelitian ini adalah variasi durasi pencahayaan dan variasi penambahan volume minyak solar yang ditambahkan ke dalam reaktor. Variasi durasi pencahayaan yang digunakan adalah pencahayaan selama 12 jam dan pencahayaan selama 24 jam. Sedangkan penambahan volume minyak solar ke dalam masing-masing reaktor adalah sebesar 346 ppm, 519 ppm dan 692 ppm. Hasil yang didapatkan dari penelitian ini adalah durasi pencahayaan selama 12 jam memiliki efek yang lebih baik terhadap penurunan konsentrasi minyak dibandingkan pencahayaan selama 24 jam. Hal ini dapat terlihat dari baiknya pertumbuhan alga dan bakteri di dalam reaktor serta tingginya penurunan konsentrasi minyak solar di dalamnya. Penurunan konsentrasi minyak solar terbaik terdapat pada reaktor dengan penambahan minyak solar sebesar 346 ppm. Pada reaktor dengan durasi pencahayaan selama 12 jam terjadi penurunan konsentrasi minyak sebesar 78,4%. Sedangkan penurunan kandungan minyak solar pada reaktor dengan durasi pencahayaan selama 24 jam adalah sebesar 73,9%.

  9. PENGARUH LAMA DAN CARA PENYIMPANAN TERHADAP PERKEMBANGAN KANDUNGAN AFLATOKSIN PADA GAPLEK DI RUMAH TANGGA

    Directory of Open Access Journals (Sweden)

    Sukati Saidin

    2012-11-01

    Full Text Available Aflatoksin yang mencemari makanan dapat menyebabkan timbulnya kanker hati. Gaplek merupakan salah satu komoditi yang dapat tercemar aflatoksin. Ada beberapa daerah di Indonesia yang menggunakan gaplek sebagai makanan pokok. Karena gaplek pada umumnya disimpan sampai panen berikutnya maka ada peluang untuk tercemar aflatoksin. Karena itu perlu diteliti sampai berapa jauh pencemaran aflatoksin pada gaplek. Tujuan penelitian untuk mengetahui pengaruh lama dan cara penyimpanan terhadap cemaran aflatoksin pada gaplek.Gaplek yang sudah dikeringkan dengan cara yang lazim dilakukan di daerah dengan makanan pokok gaplek dibagi menjadi 3 bagian. Bagian pertama disimpan di lantai semen terbuka, bagian kedua disimpan dalam bakul terbuka dan bagian ketiga di simpan dalam karung goni yangdiikat. Analisa kandungan aflatoksin dan kadar air gaplek dilakukan pada permulaan dan 4, 8, 12, 16 dan 20 minggu dalam penyimpanan.Perkembangan cemaran aflatoksin gaplek dalam penyimpanan ini mengungkapkan makin lama gaplek disimpan makin tinggi kadar aflatoksinnya. Rata-rata kadar air gaplek selama penyimpanan berkisar antara 13,1% sampai 14,0%. Gaplek yang disimpan di lantai menunjukkan kandungan aflatoksin tertinggi, diikuti oleh gaplek yang disimpan dalam bakul dan dalam karung.Hasil penelitian ini mengungkapkan bahwa sampai waktu panen berikutnya sekitar 10 bulan, kandungan aflatoksin gaplek yang disimpan di dalam karung diikat belum mencapai taraf yang menbahayakan kesehatan.

  10. Penentuan Letak dan Kapasitas Optimal Bank Kapasitor pada Jaring Transmisi 150 kV Sumatera Utara Menggunakan Artificial Bee Colony Algorithm

    Directory of Open Access Journals (Sweden)

    Andita Noor Shafira

    2017-01-01

    Full Text Available Listrik merupakan suatu kebutuhan mutlak yang harus dipenuhi untuk menjamin keberlangsungan hidup masyarakat masa kini. Kebutuhan ini terus meningkat seiring dengan pertumbuhan beban yang semakin bertambah dari tahun ke tahun. Pertumbuhan beban yang diikuti dengan peningkatan permintaan suplai daya reaktif akibat beban bersifat induktif meningkat menyebabkan perencanaan dan operasi dari sistem interkoneksi menjadi lebih kompleks sehingga kualitas sistem menjadi kurang dapat diandalkan. Aliran daya reaktif dapat menyebabkan drop tegangan dan kerugian daya dalam sistem transmisi. Untuk itu dilakukan penentuan letak dan kapasitas kapasitor shunt untuk mengurangi kerugian daya dengan menggunakan Newton-Raphson dan metode optimisasi Artificial Bee Colony Algorithm. Pada percobaan ini dilakukan pemasangan lima kapasitor dengan jumlah koloni sebesar 50 dan Max Cycle Number sebesar 150. Hasil simulasi menggunakan metode Artificial Bee Colony Algorithm menunjukkan bahwa pemasangan kapasitor pada Jaring Transmisi 150 kV Sumatera Utara dapat menurunkan kerugian daya aktif sebesar 8,37%.

  11. Uji Kandungan Timbal (Pb dalam Daun Tanaman Peneduh di Jalan Protokol Kota Semarang

    Directory of Open Access Journals (Sweden)

    Pawit Dwi Istiaroh

    2014-03-01

    Full Text Available Gas buang yang dihasilkan oleh kendaraan bermotor pengguna bahan bakar bensin bertimbal mengemisikan Pb ke dalam lingkungan dan berpotensi terserap ke dalam jaringan daun tanaman peneduh jalan. Penelitian bertujuan untuk menguji kandungan timbal (Pb dalam daun tanaman peneduh di jalan protokol Kota Semarang. Sampel penelitian adalah daun angsana (Pterocarpus indicus Willd, glodokan (Polyalthia longifolia Bent & Hook. F dan mahoni (Swietenia mahagoni (L. Jacq. yang dominan digunakan sebagai peneduh di lima jalan protokol Kota Semarang yaitu Jl. Kalibanteng, Jl. Pemuda, Jl. Brigjen Katamso, Jl. Kaligawe dan Jl. Setyabudi. Kandungan Pb dalam daun tanaman angsana, glodokan dan mahoni diuji menggunakan metode AAS (Atomic Absorption Spectrophotometery di Laboratorium Balai Besar Teknologi Pencegahan Pencemaran Industri (BBTPPI Semarang. Hasil penelitian ditemukan kandungan Pb dalam daun tanaman peneduh di jalan protokol Kota Semarang. Kandungan Pb dalam daun tertinggi 0,05 ppm/g daun basah terdapat pada tanaman angsana dan terendah sebesar 0,01 ppm/g terdapat pada tanaman glodokan dan mahoni. Dari hasil penelitian disimpulkan bahwa kandungan Pb dalam daun tanaman peneduh di jalan protokol Kota Semarang berkisar 0,01-0,05 ppm/g daun basah dan tergolong rendah dibawah kadar normal Pb dalam tanaman yaitu 0,5-3,0 ppm.Exhaust gases produced by motor vehicle users leaded gasoline emits Pb into the environment and potentially absorbed into the leaf tissue of plants along the roadside. The study aimed to examine the content of lead (Pb in the shade plant leaves in the Semarang City road protocol. Samples were angsana leaves (Pterocarpus indicus Willd, glodokan (Polyalthia longifolia Bent & Hook. F and mahogany (Swietenia mahagoni (L. Jacq.. They were predominantly used as a shade in five main streets of Semarang is Kalibanteng St, Youth St, Brig Katamso St, Kaligawe St and Setyabudi St. The content of Pb in the Angsana, glodokan and mahogany leaves were

  12. KEBIJAKAN DALAM PENENTUAN DAN PENDANAAN MODAL KERJA PERUSAHAAN

    Directory of Open Access Journals (Sweden)

    Miswanto Miswanto

    2012-10-01

    Full Text Available Abstract: Policy in Determining and Financing Company’s Working Capital. In funding working capital, a company can use hedging policy, conservative policy, and aggressive policy. In relation to long-term versus short-term financing, temporary versus permanent current assets, and the trade-off between risk and profitability, it can be concluded that when the temporary current assets are financed by short-term financing they have moderate risk and profitability, when the temporary current assets are financed by long-term financing they have low risk and profitability, when the permanent current assets are financed by short-term funding they have high risk and profitability, and when the permanent current assets are financed by long-term financing they have moderate risk-profitability. To measure the performance of the working capital management, the working capital position of the company needs to be analyzed. By using the data presented on the balance sheet and income statement, the company can carry out the analysis of working capital performance using financial ratio analysis on working capital, analysis of the funding sources and use of funding statement, and analysis of the company's cash flow statement. Keywords: liquidity, capital, financing, profitability, and risk   Abstrak: Kebijakan dalam Penentuan dan Pendanaan Modal Kerja Perusahaan. Dalam mendanai modal kerja, perusahaan dapat menggunakan kebijakan hedging, kebijakan konservatif, dan kebijakan agresif. Dalam hubungannya antara pendanaan jangka pendek versus jangka panjang, aktiva lancar temporer versus permanen, dan trade-off antara risiko dan profitabilitas diperoleh kesimpulan bahwa jika aktiva lancar temporer dibiayai dengan pendanaan jangka pendek memiliki risiko dan profitabilitas moderat, jika aktiva lancar temporer dibiayai dengan pendanaan jangka panjang memiliki risiko dan profitabilitas rendah, jika aktiva lancar permanen dibiayai dengan pendanaan jangka pendek memiliki

  13. Penentuan Alternatif Lokasi Pengembangan Kawasan Agroindustri Berbasis Komoditas Pertanian Unggulan Di Kabupaten Lamongan

    Directory of Open Access Journals (Sweden)

    Ajeng Nugrahaning Dewanti

    2012-09-01

    Full Text Available Penelitian ini bertujuan untuk menentukan alternatif lokasi pengembangan kawasan agroindustri berbasis komoditas pertanian unggulan di Kabupaten Lamongan guna meningkatkan nilai tambah sektor pertanian. Dalam penelitian ini digunakan beberapa alat analisis yakni analisis LQ dan analisis Shift Share yang digunakan untuk menentukan komoditas unggulan, analisis regresi linier berganda untuk mengetahui faktor-faktor yang berpengaruh terhadap penentuan lokasi kawasan agroindustri, serta analisa pembobotan untuk menentukan lokasi yang paling potensial untuk dikembangkan sebagai kawasan agroindustri. Berdasarkan hasil analisis, diperoleh bahwa komoditas pertanian unggulan di kabupaten Lamongan adalah komoditas padi. Selanjutnya didapatkan faktor-faktor yang mempengaruhi penentuan lokasi pengembangan agroindustri di Kabupaten Lamongan yakni tenaga kerja, aksesibilitas, listrik kuantitas bahan baku, dan pasar. Kemudian berdasarkan faktor-faktor tersebut didapatkan lokasi-lokasi yang potensial untuk pengembangan kawasan agroindustri berbasis komoditas unggulan di Kabupaten Lamongan yakni Kecamatan Babat, Paciran, Kedungpring, Lamongan, Modo, dan Brondong.

  14. Penentuan Posisi Hiposenter Gempabumi dengan Menggunakan Metoda Guided Grid Search dan Model Struktur Kecepatan Tiga Dimensi

    Directory of Open Access Journals (Sweden)

    Hendro Nugroho

    2014-04-01

    Full Text Available Salah satu penelitian ilmu kebumian yang perlu dilakukan untuk membantu upaya mitigasi bencana gempabumi adalah menentukan pusat gempa dengan presisi tinggi. Dalam hal ini ketelitian sangat diperlukan oleh karena adanya heterogenitas materi bumi yang dilewati gelombang gempa dari hiposenter ke stasiun pencatat. Oleh karena itu dengan bantuan model geotomografi (model struktur 3D kecepatan rambat gelombang gempa diharapkan akan dapat diperoleh posisi sumber gempa yang lebih baik. Untuk studi ini daerah penelitian yang diambil adalah Jawa dan sekitarnya, yaitu : 7° LS - 11° LS dan 105° BT - 114° BT. Data yang digunakan adalah waktu tiba gelombang P dari seismogram yang direkam pada seismograf broadband di Indonesia. Penentuan hiposenter menggunakan metoda guided grid search dengan model kecepatan 3D untuk busur Sunda. Hasil penentuan hiposenter gempa dengan pendekatan ini memberikan tingkat kesalahan yang lebih kecil dibandingkan dengan jika digunakan model kecepatan 1D.

  15. PERAMALAN PENENTUAN JUMLAH PERMINTAAN KONSUMEN BERBASIS TEKNOLOGI INFORMASI TERHADAP PRODUK BORDIR PADA KOTA TASIKMALAYA

    Directory of Open Access Journals (Sweden)

    Lies Sunarmintyastuti

    2016-12-01

    Full Text Available Peramalan penentuan jumlah permintaan konsumen berbasis teknologi informasi terhadap produk bordir di Kota Tasikmalaya, mempunyai tujuan khusus untuk menentukan jumlah kebutuhan permintaan konsumen secara periodik, berkala dan pola kebutuhan permintaan konsumen dimasa yang akan datang secara trend, musiman. Penelitian ini berawal dari konsep pemikiran bagaimana supaya produsen bordir di Kota Tasikmalaya mendapatkan pendapatan yang optimal dan efisien dalam biaya produksi bordir mereka. Pendekatan peramalan dalam penelitian ini menggunakan metode Time Series dengan menggunakan Single Exponential Smoothing Modeluntuk mendapatkan nilai peramalan secara periodik, Double Exponential Smoothing Modeluntuk mendapatkan nilai peramalan secara trend dan Triple Exponential SmoothingModeldengan Multiplicative Seasonal Modeluntuk mendapatkan nilai peramalan secara musiman, serta pengujian peramalan menggunakan MAD, MAPE dan MSE untuk mencari error terkecil. Pada tahap berikutnya dibangun sebuah sistem peramalan penentuan permintaan konsumen dengan menggunakan metode pengembangan sistem waterfall dan pembuatansoftware yang dirancang menggunakan bahasa pemrograman Java dengan editor NetBeans dan database MySQL.

  16. Studi Penentuan Kecepatan Aliran Darah dan Frekuensi Terimaan Pasien Atherosclerosis Menggunakan USG Color Doppler

    OpenAIRE

    Mulyani, Emba

    2014-01-01

    Jurnal Fisika Medik Studi Penentuan Kecepatan Aliran Darah dan Frekuensi Terimaan Pasien Atherosclerosis Menggunakan USG Color Doppler Mulyani H211 08 507 Pembimbing Utama Sri Dewi Astuty Ilyas,Ssi, Msi Nip.19750513 199903 2 001 Pembimbing Pertama Dahlang Tahir, Msi, Ph.D Nip.19750907 200003 1 001 ABSTRACT Research about Study of determination blood speed of current and freq uency give patient atherosclero sis uses plane USG Color Doppler had be...

  17. Kandungan Flavonoid, Total Fenol, Dan Antioksidan Snack Bar Sorgum Sebagai Alternatif Makanan Selingan Penderita Diabetes Mellitus Tipe 2

    OpenAIRE

    Isdamayani, Linda; Panunggal, Binar

    2015-01-01

    Latar Belakang: Sorgum merupakan pangan lokal yang mengandung komponen antioksidan seperti favonoid dan total fenol. Konsumsi sorgum dapat diolah menjadi produk makanan selingan berupa snack bar. Kandungan antioksidan pada sorgum bermanfaat sebagai pangan sumber antioksidan bagi penderita diabetes mellitus (DM) tipe 2. Diabetes mellitus (DM) tipe 2 ditandai dengan hiperglikemia yang meningkatkan stres oksidatif. Stress oksidatif dapat berkembang menjadi komplikasi makro maupun mikrovaskuler. ...

  18. Kandungan Pati Resisten, Amilosa, Dan Amilopektin Snack Bar Sorgum Sebagai Alternatif Makanan Selingan Bagi Penderita Diabetes Mellitus Tipe 2

    OpenAIRE

    Fathurrizqiah, Ratna; Panunggal, Binar

    2015-01-01

    Latar Belakang: Hiperglikemia pada penderita Diabetes Mellitus Tipe 2 tidak terkontrol menyebabkan komplikasi penyakit, sehingga perlu pengaturan diet untuk mengontrol gula darah. Sorgum mengandung pati resisten, amilosa, dan amilopektin yang dapat menghambat kenaikan gula darah sehingga pembuatan sorgum sebagai snack bar dapat dijadikan sebagai alternatif makanan selingan penderita Diabetes Mellitus Tipe 2.Tujuan: Menganalisis kandungan pati resisten, amilosa, amilopektin, dan tingkat peneri...

  19. Simulasi Pengaruh Kandungan CO2 dalam Gas Umpan terhadap Reforming dan Shift Converter Sistem Pabrik Amoniak

    Directory of Open Access Journals (Sweden)

    Jefry Yusuf

    2015-12-01

    Full Text Available Perubahan produksi dan pangsa pasar gas alam domestik maupun global mempengaruhi suplai terhadap pabrik pupuk-amoniak baik dari sisi jumlah, komposisi maupun harga. Kondisi ini memungkinkan pabrik amoniak menerima jenis gas alam berat kaya dengan CO2 (raw gas maupun gas alam  ringan minim CO2 (treated gas. Pada penelitian ini telah dilakukan analisa pengaruh perubahan  komposisi gas alam terutama kandungan CO2 dengan variasi 0, 5, 10, 15, 20, 25, 30, 35, 40, 45 dan 50% vol terhadap operasional reforming dan shift converter sistem pabrik amoniak-2 PT. PI Mexisting dengan metodelogi simulasi mengggunakan Aspen HYSYS V8.0. Untuk memproduksi amoniak dengan jumlah yang sama, hasil studi menunjukkan penambahan CO2 dalam gas umpan akan meningkatkan pressure drop sistem, laju pembentukan komponen hidrogen turun sementara konsumsi energi bertambah di reforming, beban katalis shift converter dan beban feed gas compressor meningkat. Kandungan CO2 sebesar 7% vol masih mungkin diaplikasikan, mengingat ada batasan beban peralatan.

  20. Kandungan bahan tambahan pangan berbahaya pada makanan jajanan anak sekolah dasar di Kabupaten Bantul

    Directory of Open Access Journals (Sweden)

    Yhona Paratmanitya

    2016-08-01

    dengan keracunan akibat penyebab lain, misalnya obat, kosmetika, dan lain-lain. Salah satu penyebab keracunan makanan adalah adanya cemaran kimia dalam makanan tersebut, seperti boraks, formalin dan rhodamin-B. Dalam data tersebut, diketahui 2,93% sampel makanan jajanan pada anak sekolah mengandung boraks, 1,34% mengandung formalin, dan 1,02% mengandung rhodamin-B. Akumulasi bahan-bahan tersebut di dalam tubuh dapat berdampak negatif bagi kesehatan.Tujuan: Mengetahui persentase makanan jajanan anak sekolah dasar (SD yang tercemar bahan tambahan pangan berbahaya (boraks, formalin, rhodamin-B di Kabupaten Bantul. Metode: Jenis penelitian ini adalah observasional dengan rancangan survei. Penelitian dilaksanakan dengan melibatkan 68 SD di Kabupaten Bantul sebagai sampel. Seluruh makanan jajanan yang dijajakan baik di luar maupun di kantin sekolah dan diduga mengandung bahan kimia berbahaya diuji kandungan cemaran kimianya yaitu kandungan boraks, formalin dan rhodamin-B. Pengujian kualitatif kandungan boraks menggunakan kurkumin, formalin menggunakan KMnO4, dan rhodamin-B menggunakan test kit Rhodamin-B. Hasil: Terdapat 107 sampel makanan dari 68 SD yang diuji. Jenis makanan jajanan yang diduga mengandung bahan kimia berbahaya yang paling banyak dijajakan di SD adalah jenis bakso (bakso, bakso tusuk, bakso goreng yaitu sejumlah 22,4% dari seluruh sampel jajanan. Di antara 98 sampel yang diuji kandungan boraks dan formalinnya, 15 sampel (15,3% positif mengandung boraks dan 25 sampel (25,5% positif mengandung formalin. Di antara 15 sampel yang diuji kandungan rhodamin-B-nya,7 sampel (46,7% positif mengandung rhodamin-B. Terdapat 34 SD (50% yang tidak terdapat jajanan yang tercemar bahan kimia berbahaya. Kesimpulan: Persentase makanan jajanan anak SD yang mengandung boraks, formalin dan rhodamin-B masih cukup tinggi.KATA KUNCI: makanan jajanan, boraks, formalin, rhodamin-B

  1. Analisis Hubungan Kluster Industri dengan Penentuan Lokasi Pelabuhan: Studi Kasus Pantai Utara Pulau Jawa

    Directory of Open Access Journals (Sweden)

    Maulana Prasetya Simbolon

    2012-09-01

    Full Text Available Proses distribusi barang merupakan suatu rangkaian proses yang terkait dalam upaya penguasaan areal pasar terluas melalui maksimisasi penjualan dan minimisasi biaya produksi (transportasi. Sebagian contoh nyata di beberapa wilayah, proses distribusi barang tidak didasarkan pada aspek minimisasi biaya transportasi/trucking (teori lokasi tradisional dimana pengiriman barang tidak melalui pelabuhan muat yang dekat dengan lokasi industri. Penelitian ini dimaksudkan untuk mengetahui keterkaitan hubungan antara industri dengan penentuan lokasi pelabuhan serta faktor yang mempengaruhinya. Metode yang digunakan adalah metode komparasi hasil perhitungan model deterministik (Linear Programming dan Gravitasi dengan Pembatas Tunggal dengan data yang ada, serta analisis korelasi (model uji kebebasan dan Crammer’s-Coefficient of Association dalam mengukur keeratan hubungan faktor-faktor yang berpengaruh dalam penentuan lokasi pelabuhan. Hasil perhitungan menunjukkan adanya hubungan/ korespondensi antara lokasi pelabuhan dengan lokasi industri dimana lokasi kluster industri terlebih dahulu ada dan diikuti lokasi pelabuhan. Faktor utama yang berpengaruh dalam penentuan lokasi pelabuhan adalah jumlah kunjungan kapal. Prosentase hasil komparasi (selisih hasil perhitungan model gravitasi dengan data yang ada untuk variabel jumlah kunjungan kapal (2,2%; daya tampung gudang/CY (2,3%; biaya transportasi/trucking (12,7%. Nilai koefisien korelasi variabel jumlah kunjungan kapal = 0,866 (keeratan hubungan: kuat/tinggi, daya tampung gudang/CY = 0,878 (kuat/tinggi, biaya transportasi (inland = 0,699 (sedang/cukup. Persebaran muatan (ekspor dari: Jawa Timur ke pelabuhan Tanjung Perak (97%, Tanjung Emas (1%, Tanjung Priok (2%; Jawa Tengah & D.I.Yogyakarta ke pelabuhan Tanjung Emas (72%, Tanjung Perak (15%, Tanjung Priok (13%; Jawa Barat ke pelabuhan Tanjung Priok (97,2%, Tanjung Emas (1,5%, Tanjung Perak (1,3%; DKI Jakarta & Banten ke pelabuhan Tanjung Priok (99

  2. KANDUNGAN KLOROFIL, KAROTENOID, DAN VITAMIN C BEBERAPA JENIS SAYURAN DAUN PADA PERTANIAN PERIURBAN DI KOTA SURABAYA

    Directory of Open Access Journals (Sweden)

    Dwi Iriyani

    2015-04-01

    Full Text Available Periurban agriculture actually means agriculture that is found surrounding urban boundary. Due to heavy load for various non-agricultural activity and transportation, it necessary to pay attention on the agro-ecological conditions where each crop could grows well. The quality of environment for growing plants in periurban influences on composition of biochemistry in plants’ tissue. The purpose of this study is to determine the chlorophyll, carotenoid, and ascorbic acid contents in three species of vegetables, those are bayam (Amaranthus tricolor, L., kangkung (Ipomoea reptans and sawi (Brassica juncea L. which were cultivated in three periurban agriculture areas of Surabaya. Total contents of chlorophyll and carotenoid was measured by spectrophotometer. Vitamin C contents was analyzed by DCPIP dye method. The results showed that bayam which was cultivated in Bangkingan-Lakarsantri has the highest content of chlorophyll (3.046 mg/g and carotenoid (375.33 μmol/L. The highest content (4.55 μg/g of vitamin C was found on sawi which was cultivated in Wonorejo. There was no significant difference on chlorophyll content, carotenoid content and vitamin C content between organic vegetables labeled and those are cultivated on Bangkingan-Lakarsantri periurban area. Kawasan pertanian periurban merupakan daerah pertanian yang dijumpai di sekitar pinggiran perkotaan. Berkaitan dengan tekanan lingkungan yang berat di kawasan periurban, akibat berbagai kegiatan non pertanian dan transportasi, perlu adanya perhatian terhadap kondisi agro klimat yang mempengaruhi pertumbuhan tanaman. Kualitas lingkungan tempat tumbuh tanaman pada kawasan pertanian periurban berpengaruh terhadap komposisi kandungan biokimia jaringan tanaman. Tujuan penelitian ini adalah untuk menetapkan kadar klorofil, karotenoid, dan vitamin C pada sayuran bayam (Amaranthus tricolor, L., kangkung (Ipomoea reptans dan sawi (Brassica juncea L. yang dibudidayakan di tiga kawasan periurban Kota

  3. KANDUNGAN GIZI, RENDEMEN TEPUNG, DAN KADAR FENOL TOTAL ALPUKAT (Persea americana, Mill VARIETAS I JO PANJANG DAN I JO BUNDAR

    Directory of Open Access Journals (Sweden)

    Wuri Marsigit

    2016-04-01

    Full Text Available The aims of the study were to determine pulp proportion, dried pulp rendement, nutrient dan  total phenolic content avocado variety of Ijo Panjang dan Ijo Bundar. Variety of Ijo Panjang and Ijo Bundar were selected because both of varieties were categorized as excelent varities and recomendedto develop in Indonesia. Water, carbohydrate, protein, fat dan ash content were determined by using proxymate analysis (AOAC, vitamin A dan E using spectrophotometry method, vitamin C using titration method, dan minerals using AAS method. Total phenolic content were determined by using Follin-Cialcetau method. The result of the studies found that pulp portion Ijo Bundar Variety higher than Ijo Panjang. Water content dan zinc of Ijo Panjang variety higher than Ijo Bundar. Dried pulp rendement of Ijo Bundar higher than Ijo Panjang. Protein, fat,  ash, minerals (Fe, Na, K dan P avocado variety of Ijo Bundar higher than Ijo Panjang. Magnesium dan mangan content of both varieties have not significant different. Total phenolic content of pulp dan dried pulp were higher in Ijo Bundar than Ijo Bundar. Keywords: Pulp proportion, dried pulp rendement, nutrients dan total phenolics content   ABSTRAK Penelitian ini bertujuan untuk mengetahui proporsi daging buah, rendemen tepung, kandungan gizi dan fenol total alpukat varietas Ijo Panjang dan Ijo Bundar. Pemilihan kedua varietas tersebut karena merupakan varietas unggul dan direkomendasikan untuk dikembangkan di Indonesia. Kandungan, air, karbohidat, protein, lemak dan abu dilakukan dengan analisis proksimat (AOAC, kandungan vitamin A dan E dengan metode spektrofotometri dan vitamin C dengan metode titrasi, analisis mineral dengan metode AAS. Total fenol dianalisis dengan metode Folin-Ciocalteu. Hasil penelitian menunjukan bahwa proporsi daging buah, kadar air, seng varietas Ijo Panjang lebih tinggi dibandingkan Ijo Bundar. Rendemen tepung alpukat lebih tinggi pada varietas Ijo Bundar. Kandungan protein, lemak, abu

  4. KANDUNGAN KIMIA SERAT KENAF DARI KOMPOS KULIT UDANG DENGAN PESTISIDA ALAMI KEONG MAS

    Directory of Open Access Journals (Sweden)

    Rusmini Rusmini

    2017-10-01

    serta bahan baku industri biofuel.  Penelitian bertujuan menghasilkan kandungan kimia serat kenaf terbaik dengan pemberian pupuk organik kompos kulit udang dan pestisida alami keong mas.  Penelitian  menggunakan Rancangan Acak Kelompok dengan  dua faktor dengan faktor pertama kompos dari kulit udang (k yang terdiri dari 3 taraf dan faktor kedua adalah pestisida nabati yang terdiri dari tiga taraf (p. Pada setiap penelitian ini  diulang sebanyak 2 ulangan sehingga keseluruhan ada 18 perlakuan.  Variabel yang diamati kandungan kimia serat yang meliputi kadar air batang, holosellulosa, sellulosa dan lignin.  Data yang diperoleh, dianalisis menggunakan analisis sidik ragam dan dilanjutkan dengan uji beda nyata terkecil pada taraf uji 5%.   Hasil penelitian menunjukkan bahwa ada kandungan holosellulosa pada serat kenaf yang terbaik pada perlakuan p2  dan k2 yaitu 81,2800 %, untuk kandungan sellulosa yang terbaik adalah p0 dan ko yaitu 40,5695% sedangkan untuk lignin tidak dilanjutkan uji lanjut karena menunjukkan tidak beda nyata.

  5. PRODUKSI DAN KANDUNGAN NUTRISI Spirulina fusiformis YANG DIKULTUR DENGAN PENCAHAYAAN MONOKROMATIS LIGHT EMITTING DIODES (LEDs

    Directory of Open Access Journals (Sweden)

    Muhammad Firdaus

    2015-06-01

    yang bersumber dari LED dengan cahaya monokromatis merah (M, biru (B, dan biru-merah (BM, serta cahaya dari lampu fluoresens sebagai kontrol (K. Puncak kepadatan sel terjadi pada hari ke-18 dengan kepadatan masing-masing sebanyak 5,56 x 104 sel/mL (M; 1,65 x 104 sel/mL (B; 4,15 x 104 sel/mL (BM; dan 4,56 x 104 sel/mL (K. Perlakuan pencahayaan LED dengan cahaya monokromatis merah mencapai biomassa panen tertinggi sebesar 3,91 mg/mL dengan kandungan protein 49,77%; lemak 19,61%; karbohidrat 6,15%; serat kasar 0,00%; dan abu 24,48%. Pencahayaan dengan LED merah berpotensi diaplikasikan sebagai sumber cahaya dalam produksi Spirulina.

  6. Efektivitas Bioremediasi Lima Jenis Tanaman Terhadap Kandungan Logam Berat (Cr2+dan Pb2+ dalam Air

    Directory of Open Access Journals (Sweden)

    I.G. Seregeg

    2012-09-01

    Full Text Available Telah dilakukan penelitian di Laboratorium, tentang efektivitas bioremediasi lima jenis tanaman ; mendong {Scirpus articularis welingi (Cyperus sp, purun (Typha sp., tales-talesan (Typhonium sp, kangkung (Ipomoea aquatica terhadap kandungan Cr2+ dan Pb2+ dalam air tercemar di Jakarta, Desember 1994. Kelima jenis tanaman tersebut ditempatkan dalam akuarium berkapasitas 10 liter, yang diisi air tercemar Cr2+ dan Pb2+ sebanyak lima liter. Penelitian ini dilengkapi dengan akuarium kontrol, seluruh perlakuan diulang dua kali. Hasilnya menunjukkan, bahwa semua jenis tanaman mempunyai kemampuan yang berbeda-beda. Kemampuan yang paling kuat ditunjukkan oleh purun disusul berturut-turut oleh welingi, mendong, kangkung dan tales-talesan. Pengaruh tanam terhadap Pb2+ menunjukkan, daya serap yang cukup kuat dan pola urutannya sama seperti yang ditunjukkan terhadap Cr2+. Tanaman yang tumbuh tegak dengan batang yang kuat (rumput-rumputan mempunyai daya serap yang lebih tinggi dibandingkan dengan tanaman menjalar.

  7. PENENTUAN HARGA JUAL KAMAR HOTEL SAAT LOW SEASON DENGAN METODE COST-PLUS PRICING PENDEKATAN VARIABEL COSTING (Studi kasus pada Hotel Puri Artha Yogyakarta)

    OpenAIRE

    Triyanto, Hesti

    2013-01-01

    Penentuan harga jual suatu produk atau jasa merupakan salah satu keputusan penting manajemen karena harga yang ditetapkan harus dapat menutup semua biaya dan mendapatkan laba yang diharapkan oleh perusahaan. Pada saat low season, pihak hotel menerapkan harga jual yang paling rendah dalam penentuan harga jualnya agar pihak hotel tidak mengalami kerugian. Penelitian ini bertujuan untuk mengetahui berapa tarif sewa kamar dan selisih tarif sewa kamar Hotel Puri Artha Yogyakarta pada saat low seas...

  8. PENGGUNAAN ALGORITMA NEWTON – RAPHSON UNTUK MEMBUAT SOFTWARE PENENTUAN DOSIS OBAT

    Directory of Open Access Journals (Sweden)

    Ibnu Gunawan

    2009-01-01

    Full Text Available USCPACK Software from University of Carolina is one of the pioneers of computerized drug dosage system. This software uses Bayesian method. The algorithm that used in this software is known as NPEM (Non Parametric Expectation Maximization. After knowing how USCPACK work, then we made new software that has the same use like USCPACK but with new algorithm that different from NPEM. These paper will describe the how to make the software based on NPAG algorithm. Abstract in Bahasa Indonesia: Software USCPACK buatan University of Carolina merupakan salah satu pelopor dimungkinkannya penentuan dosis obat persatuan waktu tertentu untuk pasien secara umum menggunakan komputer. Software ini bekerja dengan menggunakan metode dasar Bayesian. Algoritma yang digunakan oleh software ini adalah NPEM (Non Parametric Expectation Maximization. Setelah mengetahui cara kerja dari USCPACK maka dibuatlah sebuah software pendosisan obat menggunakan algoritma non parametrik lain selain NPEM. Paper ini akan membahas pembuatan software pendosisan obat menggunakan algoritma newton – raphson dalam penentuan dosis obat terkomputerisasi. Kata kunci: Pendosisan terkomputerisasi, optimasi, Bayesian, NPEM, Newton Raphson,USCPACK

  9. KANDUNGAN NATRIUM (Na DAN GARAM (NaCl DALAM IKAN ASIN KERING MENTAH DAN GORENG DI PASAR ANYAR BOGOR

    Directory of Open Access Journals (Sweden)

    Heru Yuniati

    2012-11-01

    Full Text Available Telah dilakukan penelitian untuk mengetahui kandungan natrium (Na dan garam (NaCl dalam 10 jenis ikan asin kering yang beredar di Pasar Anyar Bogor. Analisis natrium dilakukan terhadap ikan asin mentah, setelah dicuci, dan setelah digoreng dengan menggunakan flamefometer. Analisis garam dilakukan dengan titrasi argentometri terhadap ikan asin mentah. Hasil analisis menunjukkan, kandungan Na dan garam dalam ikan asin sangat beragam besarnya berturut-turut berkisar antara 0,3-8,1% dan 5,7-21,2%. Ikan asin yang mempunyai kadar Na dan garam tinggi adalah ikan sepat, peda putih dan gabus. Jumlah air dalam ikan asin juga bervariasi, berkisar antara 10,3-46,8%. pencucian dan penggorengan dapat menurunkan kadar garam ataupun natrium sebesar 37,4%.

  10. Pengaruh Intensitas Cahaya Terhadap Kandungan Klorofil-a Dan -C Zooxanthellae Dari Isolat Karang Lunak Zoanthus SP.

    OpenAIRE

    Sayekti, Sundari; Harpeni, Esti; Muhaemin, Moh

    2017-01-01

    Terumbu karang sangat sensitif terhadap Perubahan alam, salah satunya seperti peningkatan intensitas cahaya. Intensitas cahaya akan mempengaruhi pigmen klorofil-a dan –c alga simbion zooxanthellae yang hidup di dalam jaringan karang, sebab intensitas cahaya memiliki peranan penting dalam proses fotosintesis pada zooxanthellae. Penelitian bertujuan untuk mengetahui pengaruh intensitas cahaya terhadap kandungan klorofil -a dan -c pada zooxanthellae. Penelitian dilaksanakan pada bulan Juli-Agust...

  11. PENENTUAN CAMPURAN LUMPUR LAPINDO SEBAGAI SUBSTITUSI PASIR DAN SEMEN DALAM PEMBUATAN PAVING BLOCK RAMAH LINGKUNGAN

    Directory of Open Access Journals (Sweden)

    Ganjar Samudro

    2016-03-01

    Full Text Available Lumpur Lapindo (LL atau Lumpur Sidoarjo (Lusi merupakan lumpur panas, yang pemanfaatannya sangat terbatas dan menimbulkan dampak sosial dan lingkungan yang cukup besar. Karakteristik Lumpur Lapindo mengandung silikat (SiO2 dan kapur (CaO yang cukup tinggi dan bersifat pozoland. Selain kandungan kimia yang menguntungkan, Lumpur Lapindo juga bersifat B3 dengan kandungan logam berat Pb 35,41 ppm dan Cu 21,9 ppm yang melebihi baku mutu Kepmenkes no.907/2002, PP no.82/2001 dan PP no.18/1999. Teknik olidifikasi menjadi paving block dapat digunakan untuk mengubah watak fisik dan kimia limbah B3 dengan cara penambahan senyawa pengikat sehingga pergerakan senyawa-senyawa B3 dapat dihambat dan membentuk ikatan massa monolit dengan struktur yang kekar. Penambahan Lumpur Lapindo sebagai substitusi semen dan pasir ditentukan sebesar 10%, 20%, 30%, 40%, dan 50%, dengan pengujian terhadap kuat tekan, daya serap air dan perlindian. Penelitian ini didapatkan variasi Lumpur Lapindo sebagai substitusi pasir dan semen optimum asingmasing sebesar 30% dengan kuat tekan 408 kg/cm2 , daya serap air 10,17% dan uji perlindian dihasilkan dibawah 0,03 ppm Pb dan Cu, serta biaya pembuatan 1 buah paving block berkurang dari Rp 1.302,86 per buah menjadi Rp 1.059,40 per buah. Lumpur Lapindo sebagai substitusi semen lebih baik penggunaannya dalam pembuatan paving block ramah ingkungan.

  12. KANDUNGAN ZAT GIZI MAKRO DAN VITAMIN PRODUK BUAH PEDADA (SONNERATIA CASEOLARIS

    Directory of Open Access Journals (Sweden)

    Ruth Dwi Elsa Manalu

    2015-04-01

    Full Text Available ABSTRACT Mangrove (Sonneratia caseolaris grows in brackish waters.Its fruits, pedada, contains beneficial vitamin and has not been processed to jam and syrup. This study was aimed to determine the composition of macro nutrient and vitamin A, B1, B2, C of pedada and its products. Design of the study was complete randomized design of two replications. The results showed that proximate composition based on dried basis was 9.2 percent protein, 4.8 percent fat, and 77.6 percent carbohydrate. Macronutrient content of jam and syrup was lower than that of fresh fruit, except for carbohydrate. Vitamin A content in 100 g of pedada was 11.21 (RE and in jam and syrup was 1.27 (RE and 0.64 (RE respectively. Vitamin B1 content in 100 g of fresh pedada was 5.04 mg, while in jam and syrup were 4.2 mg and 6.72 mg, respectively. Vitamin B2 content in 100 g of fresh pedada was 7.65 mg, while in jam and syrup were 1.94 mg and 1.12 mg, respectively. Vitamin C content in 100 g of fresh pedada was 56.74 mg and decreased to 12.20 mg and 17.08 mg in jam and syrup, respectively. Pedada and its products could contribute as source of macro and micro nutrient in the diet of community. Keywords: pedada (sonneratia caseolaris, pedada’s jam, pedada’s syrup, vitamin ABSTRAK Mangrove (Sonneratia caseolaris tumbuh di perairan payau. Buahnya, pedada, mengandung vitamin, dan belum pernah diolah menjadi selai dan sirup. Penelitian ini bertujuan menentukan komposisi zat gizi makro dan potensi vitamin A, B1, B2, C dalam buah pedada dan produk olahannya. Desain penelitian adalah rancangan acak lengkap dengan dua ulangan. Hasil penelitian menunjukkan bahwa komposisi proksimat buah pedada segar berdasarkan bobot kering adalah 9,2 persen protein, 4,8 persen lemak, dan 77,6 persen karbohidrat. Kandungan zat gizi makro pada produk selai dan sirup lebih rendah, sedangkan kandungan karbohidratnya lebih tinggi. Kandungan vitamin A dalam 100 g pedada segar sebesar 11,21 (RE dan setelah

  13. Pengaruh Pretreatment Secara Alkalisasi-Resistive Heating terhadap Kandungan Lignoselulosa Jerami Padi

    Directory of Open Access Journals (Sweden)

    Dewi Maya Maharani

    2017-09-01

    pretreatment yang berfungsi untuk mendegradasi ikatan lignin, meningkatkan luas permukaan biomassa dan dekristalisasi selulosa. Tujuan dari penelitian ini adalah mengetahui pengaruh alkalisasi resistive heating pada proses pretreatment jerami padi sebelum dikonversi lebih lanjut menjadi bioetanol dan mengetahui pengaruh suhu pemanasan serta konsentrasi NaOH selama pretreatment terhadap perubahan kandungan lignin, selulosa dan hemiselulosa. Sebelum dilakukan penelitian dilakukan perancangan reaktor resistive heating. Jerami padi ukuran 100 mesh dilarutkan pada larutan NaOH dengan variasi konsentrasi 0,03 M, 0,05 M, dan 0,07 M, selanjutnya dipanaskan pada reaktor resistive heating dengan variasi suhu pemanasan 75 oC, 85 oC, dan 99 oC. Selulosa merupakan senyawa yang akan dikonversi lebih lanjut menjadi glukosa. Sehingga pada penelitian ini dipilih kondisi optimum berdasarkan peningkatan selulosa tertinggi hingga 8,88% serta penurunan lignin dan hemiselulosa sebesar 1,39% dan 4,33% pada perlakuan suhu pemanasan 75 oC dan konsentrasi NaOH 0,07 M. Alkalisasi resistive heating dapat diterapkan pada pretreatment jerami padi karena dapat mengurangi kandungan lignin dan hemiselulosa serta meningkatkan kandungan selulosa.

  14. Screening Kandungan Plastik pada Minyak Goreng yang Terdapat pada Gorengan di Jati Padang

    Directory of Open Access Journals (Sweden)

    Ayu Ratna Sari

    2014-09-01

    Full Text Available AbstrakPlastik ditambahkan ke dalam gorengan dengan cara dimasukkan ke dalam minyak goreng panas oleh penjual gorengan agar gorengannya tetap gurih dalam waktu yang lama. Praktik penggunaan plastik pada minyak goreng ini telah ditemukan pada beberapa tempat di Indonesia. Daerah Jati Padang telah dilakukan identifikasi awal kepada penjual gorengan dan diperkirakan minyak gorengnya mengandung plastik, untuk itu diperlukan screening kandungan plastik pada minyak goreng yang terdapat pada gorengan di Jati Padang. Penelitian ini bertujuan untuk mengetahui apakah terdapat kandungan plastik pada minyak goreng yang digunakan oleh penjual gorengan di Jati Padang. Jenis penelitian ini adalah deskriptif kualitatif. Sampel yang diambil sebanyak 10 dari penjual gorengan dengan masing-masing sebanyak 100 ml minyak goreng. Semua sampel dilakukan uji kualitatif dengan GC-MS QP2010 jenis kolom RT-5MS (Crossbond 5% Diphenyl- 95% Dimethypoly silicone. Hasil penelitian menunjukkan bahwa 9 dari 10 sampel minyak goreng mengandung senyawa isopropyl dari plastik polyethylene dan polypropylene. Sampel yang mengandung senyawa plastik dengan persentasenya adalah sampel 1(18.57%, 2(19.19%, 3(18.54%, 4(23.11%, 6(8.52%, 7(7.80%, 8(11.49%, 9(11.57%, dan 10(19.69%.Kata kunci: screening, plastik, minyak goreng, GC-MS, isopropylAbstractPlastics is added into frieds by entering into hot cooking oil by the seller in order fried savory fried fixed in a long time. The added of plastics in cooking oil has been found in several places in Indonesia. The fried seller in Jati Padang has made as initial identification to estimated oil-containing plastic. It is necessary for screening of plastic content in cooking oil found in fried in Jati Padang. The objective of this study was to determine whether there was any plastics content in coocking oil by the fried seller in Jati Padang. This research was a descriptive qualitative. Samples were taken from10 of fried sellers about 100 ml of

  15. Penilaian Kandungan Komponen Teknologi Humanware pada IKM (Studi Kasus: IKM Mebel Propinsi DI. Yogyakarta

    Directory of Open Access Journals (Sweden)

    Siti Rohmatul Umah

    2016-04-01

    Full Text Available ABSTRAKKemampuan sumber daya manusia (humanware merupakan faktor penentu dalam keberhasilan suatu organisasi dalam menghadapi tantangan-tantangan perusahaan dalam era globalisasi. Usaha perbaikan dan pengembangan SDM dapat dilakukan secara terarah dan optimal bila diketahui terlebih dahulu kondisi dari komponen humanware pada suatu perusahaan. Penelitian ini bertujuan untuk menilai kandungan komponen humanware pada IKM mebel di propinsi DI Yogyakarta. Perhitungan dilakukan dengan menggunakan metode technometrik. Data diperoleh dengan menyebarkan kuesioner pada sampel 20 IKM mebel DIY dengan dua kategori pemilik dan pekerja. Perhitungan data dilakukan dengan metode teknometrik. Hasil penelitian menunjukkan bahwa batas bawah kecanggihan humanware kategori pemilik ada pada level 1 klasifikasi kemampuan mengoperasikan dan batas atas ada pada level 3 klasifikasi kemampuan memperbaiki. Sedangkan untuk kategori pekerja, batas bawah ada pada level 1 klasifikasi kemampuan mengoperasikan dan batas atas pada level 3 klasifikasi memperbaiki. Hal ini mengimplikasikan bahwa sumber daya manusia pada IKM Mebel baik pemilik dan pekerja memiliki kemampuan yang sama yaitu mempunyai kemampuan dan ketrampilan mengoperasikan dan memperbaiki peralataan produksi. Kata kunci : Kandungan teknologi, humanware, IKM MebelABSTRACTOne of methods performance improving in Small and Medium Industries is by improve technology capability. One of technology components is humanware, where human resource capability in a organization is determinant of organization’s succesfull in facing treats in globalization era. The Improvement and development programs for human resources can be implemented optimally if is known already the conditions of humanware in a organization. The paper is aim to assess humanware content in SME’s in furniture industry with using technometric method. Sample of observation was 20 participants from SME’s Furniture in Yogyakarta province. Respondents

  16. Multi-Criteria Decision Making Dalam Penentuan Jurusan Siswa Pada Lembaga Pendidikan dan Pelatihan (LPP Penerbangan

    Directory of Open Access Journals (Sweden)

    - Safrizal

    2016-11-01

    Full Text Available Lembaga Pendidikan dan Pelatihan (LPP Penerbangan adalah Lembaga pelatihan profesi yang memdidik, melatih dan menyalurkan kerja dalam bidang penerbangan. Dalam menentukan jurusan siswa ada LPP Penerbangan yaitu jurusan Airlines Staf, Travel Agent Staf dan Cabin Staf diperlukan banyak kriteria yang dibutuhkan agar jurusan yang ditentukan sesuai dengan bidang pekerjaan yang ada pada perusahaan penerbangan dan pihak manajemen dapat merekomendasikan untuk ditempatkan pada maskapai tersebut. Untuk itu perlu adanya sebuah Sistem Pendukung Keputusan (SPK serta penerapan metode AHP yang akan membantu mengolah data siswa tersebut. Metode AHP dinggap baik karena dapat membandingkan antara kriteria yang ditetapkan dengan alternatif. Penerapan metode metode  AHPmenjadi suatu kerangka untuk mengambil keputusan dengan efektif atas persoalan yang kompleks dengan menyederhanakan dan mempercepat porses pengambilan keputusan dengan memecahkan pesoalan tersebut kedalam bagian-bagiannya untuk mempengaruhi hasil dalam membantu pihak manajemen dalam merekomendasikan atau menentukan jurusan yang sesuai dengan kemampuan siswa tersebut. Kata kunci -Sistem-Pendukung-Keputusan, Penentuan Jurusan, LPP Penerbangan, AHP

  17. PENENTUAN FITUR WEBSITE BIDANG PARIWISATA DAN KEBUDAYAAN DENGAN METODE FEATURE-ORIENTED DOMAIN ANALYSIS (FODA

    Directory of Open Access Journals (Sweden)

    Muhammad Iqbal

    2016-10-01

    Penentuan fitur dalam membuat website bidang pariwisata dan kebudayaan dibutuhkan untuk mengetahui fitur yang bisa diimplementasikan. Untuk membantu menentukan fitur tersebut, digunakan analisis domain dengan metode Feature-Oriented Domain Analysis (FODA. Metode tersebut mempunyai tahapan dimulai dari tinjauan aplikasi terhadap ketiga website sebagai sampel untuk mengambil fitur. Selanjutnya tahapan analisis konteks yang mendapatkan diagram struktur dan diagram konteks. Berikutnya tahapan pemodelan domain yang dibagi dua langkah yaitu analisis fitur untuk mendapatkan fitur-fitur pada aplikasi web melalui diagram fitur dengan penjelasan melalui kamus terminologi domain. Langkah berikutnya adalah pemodelan entity-relationship dengan membuat diagram entity-relationship untuk pembuatan database. Terakhir, pemodelan arsitektur dengan membuat arsitektur domain untuk pengembangan aplikasi yang hanya fokus pada fitur.  Hasil dari analisis fitur adalah didapatkan sebanyak 38 fitur mandatory yang berarti fitur tersebut wajib diimplementasikan dalam aplikasi web untuk pariwisata dan kebudayaan.  Kata kunci: Pariwisata, Kebudayaan, Website, Fitur, Feature-Oriented Domain Analysis

  18. Rancang Bangun Sistem Pendukung Keputusan Penentuan Program Acara Di KSTV Kediri Dengan Menggunakan Metode Fuzzy AHP

    Directory of Open Access Journals (Sweden)

    Mufid Ali Fatoni

    2015-01-01

    Full Text Available Abstract Penentuan program acara pada suatu stasiun televisi merupakan denyut nadi dari penyiaran pertelevisian. Mekanisme semacam ini harus didukung dengan sistem pendukung keputusan yang bukan hanya mempermudah suatu pekerjaan, tetapi efektifitas dan efisiensinya. Penelitian ini bertujuan untuk menghasilkan sistem pendukung keputusan yang dapat memberikan rekomendasi alternatif program acara sesuai dengan perbandingan kriteria dan alternatif yang telah dievaluasi dengan menggunakan metode Fuzzy AHP. Kriteria yang digunakan pada sistem meliputi biaya produksi, daya tarik, tema, segmentasi, profit, orientasi program, dan etika. Dengan adanya sistem pendukung keputusan ini akan mempermudah divisi program acara dalam menentukan program acara yang akan ditayangkan. Selain itu, sistem juga memberikan kemudahan bagi manager operasional dalam mengawasi acara-acara yang ada dalam proses broadcast KSTV.

  19. Penentuan Distribusi Suhu pada Permukaan Geometri Tak Tentu Menggunakan Metode Random Walk

    Directory of Open Access Journals (Sweden)

    Balduyanus Yosep Godja

    2016-05-01

    Full Text Available Telah dilakukan penentuan distribusi suhu dalam keadaan tunak pada sebuah plat bergeometri tak tentu menggunakan metode Random Walk yang dilengkapi fungsi green. Setiap sisi plat dikondisikan bervariasi terhadap suhu dalam rentang 10°C sampai 100°C dengan 4 (empat konfigurasi berkeadaan steady. Persamaan Laplace yang mendeskripsikan permasalahan ini dihampiri dengan mensimulasikan sejumlah walker pada setiap titik domain permasalahan untuk kemudian secara acak disebar menuju ke setiap sisi plat. Hasil yang diperoleh untuk setiap kondisi plat menunjukkan kesalahan relatif terhadap solusi numerik metode iterasi jacobi yang telah menghampiri solusi analitik, secara rata-rata adalah 0,85%. Nilai kesalahan tersebut diperoleh dengan menggunakan 5000 walker. Penelitian ini juga mendapatkan bahwa akurasi hampiran ditentukan oleh banyaknya walker yang digunakan. Secara umum, semakin banyak jumlah walker yang digunakan maka akurasi hampiran akan semakin baik.

  20. Identifikasi dan Penentuan Kadar Boraks dalam Lontong yang Dijual di Pasar Raya Padang

    Directory of Open Access Journals (Sweden)

    Rizki Amelia

    2014-09-01

    Full Text Available AbstrakKeamanan makanan merupakan salah satu masalah yang harus mendapatkan perhatian terutama di negara berkembang seperti Indonesia, karena bisa berdampak buruk terhadap kesehatan. Penyebabnya adalah masih rendahnya pengetahuan, keterampilan, dan tanggung jawab produsen pangan terhadap mutu dan keamanan makanan terutama pada industri kecil atau industri rumah tangga. Hal ini menyebabkan produsen sering menambahkan bahan kimia ke dalam produk makanan, salah satunya boraks. Konsumsi boraks dapat menyebabkan mual, muntah, kanker bahkan kematian. Penelitian ini bertujuan untuk melakukan identifikasi dan penentuan kadar boraks pada lontong yang dijual di Pasar Raya Padang. Penelitian ini merupakan penelitian deskriptif yang dilakukan di Laboratorium FMIPA Universitas Andalas Padang dari bulan Januari sampai bulan Desember 2013. Identifikasi dan penentuan kadar boraks dilakukan terhadap 10 sampel lontong yang diambil secara random. Metoda yang digunakan adalah metoda titrasi dan menggunakan larutan standar NaOH. Hasil penelitian yang dilakukan terhadap 10 sampel, didapatkan tidak ada satupun sampel lontong yang mengandung boraks.Kata kunci: boraks, lontong, titrasiAbstractThe food safety is one of problems that should get attention, especially in developing countries like Indonesia, because it can gives a negative impact for health. The cause is lack of knowledge, skill, and responsibility for the quality and safety of food, especially in small industries or home industry. It causes producers often add chemicals to food products, one of which borax. Consumption of borax can cause nausea, vomiting, cancer and even death. This research was to identify and determination of borax in lontong which sold at Pasar Raya Padang. This was a descriptive study at The Chemistry Laboratory, Andalas University Padang from January to December 2013. The identification and determination of borax on 10 samples of lontong taken by random. The method used is titration

  1. PENGARUH PEMBERIAN JUMLAH TAKARAN RAGI TERHADAP KANDUNGAN PROTEIN YANG DIHASILKAN PADA TEMPE BIJI NANGKA (Artocarpus heterophyllus

    Directory of Open Access Journals (Sweden)

    Harmoko Harmoko

    2016-05-01

    Full Text Available Jackfruit (Artocarpusheterophyllus, is well known in Indonesia, when the fruit is ripe jackfruit can be consumed. After we consume jackfruit, we'll leave the trash in the form of jackfruit seed, which has not been used by the community to the fullest. The purpose of this study are trying to explore another potential of jackfruit seeds and increasing the protein content of jackfruit seeds by processing  in to tempeh. Another purpose is knowing the number yeast of doses that can produce in tempeh of jackfruit seeds. This research uses 4 treatments (A: 0.25 grams yeast/50 grams jackfruit seed, B: 0.50 grams yeast/50 grams jackfruit seeds, C: 0.75 gram yeast/50 grams jackfruit seeds, and D: 1 grams yeast/50 grams of jackfruit seeds with 4 repetitions. Test protein content tests conducted at the Laboratory of Food Technology and Agricultural Faculty of Agricultural Technology, GadjahMada University (UGM. Treatment A produced protein average of 2,64%, B produced protein average of 3,429%, treatment C produced protein average of 4,146% and treatment D produced protein average of 5,635% protein. The highest protein content is produced by treatment D. Keywords: Takaran   ragi, tempe  biji  nangka (Artocarpusheterophyllus,kandungan protein.

  2. ANALISIS KANDUNGAN GIZI PADA IKAN BANDENG YANG BERASAL DARI HABITAT YANG BERBEDA

    Directory of Open Access Journals (Sweden)

    H Hafiludin

    2015-04-01

    Full Text Available Bandeng (Chanos chanos, Forskal merupakan salah satu komoditas yang strategis untuk memenuhi kebutuhan protein yang relatif murah dan digemari oleh konsumen di Indonesia.  Bandeng sebagai bahan pangan, merupakan sumber zat gizi yang penting bagi proses kelangsungan hidup manusia Tujuan penelitian ini adalah untuk mengetahui komposisi kimia daging ikan bandeng yang berasal dari habitat yang berbeda yaitu air tawar dan air payau. Penelitian dilakukan dengan dua tahap yaitu preparasi sampel saat transportasi dan preparasi bahan baku untuk memisahkan daging, kulit, tulang dan jeroan. Analisa yang dilakukan yaitu analisis proksimat, asam amino, asam lemak, mineral dan vitamin. Hasil yang didapatkan bahwa ikan bandeng dari dua habitat memperoleh rendemen yang berbeda. Rendemen ikan bandeng air tawar sebesar 38,5%, sedangkan air payau sebesar 50,8%. Ikan bandeng kaya akan sumber protein (20-24%, asam amino, asam lemak, mineral dan vitamin. Komposisi asam amino tertinggi yaitu glutamat sebesar 1,386% (air tawar dan 1,268% (air payau. Asam lemak tidak jenuh tertinggi oleat 31-32%, mineral makro pada daging ikan bandeng yaitu: Ca, Mg, Na dan K. Mineral mikronya terdiri dari Fe, Zn, Cu, Mn. Kandungan vitamin daging ikan bandeng meliputi vitamin A, B1 dan B12.Kata Kunci: habitat berbeda, ikan bandeng (Chanos chanos, Forskal, kandungan giziTHE ANALYSIS OF NUTRITIONAL CONTENT OF MILKFISHES WHICH COME FROM DIFFERENT HABITATSABSTRACTMilkfish (Chanos chanos, Forskal is one of the strategic commodities to fulfill protein need which is relatively cheap and favored by Indonesian consumer. Milkfish as a comestible is an important sources of nutrient for the survival of mankind. The objective of this research is to know the flesh’s chemical composition of the milkfishes come from different habitats which are freshwater and brackish water. The research was conducted through two stages, the stage of sample preparation for transportation, and the stage of raw

  3. PENENTUAN PRODUCTION LOT SIZES DAN TRANSFER BATCH SIZES DENGAN PENDEKATAN MULTISTAGE

    Directory of Open Access Journals (Sweden)

    Purnawan Adi W

    2012-02-01

    Full Text Available Pengendalian dan perawatan inventori merupakan suatu permasalahan yang sering dihadapi seluruh organisasi dalam berbagai sektor ekonomi. Salah satu tantangan yang yang harus dihadapi dalam pengendalian inventori adalah bagaimana menentukan ukuran lot yang optimal pada suatu sistem produksi dengan berbagai tipe. Analisis batch produksi (production lot dengan pendekatan hybrid simulasi analitik merupakan salah satu penelitian mengenai ukuran lot optimal. Penelitian tersebut menggunakan pendekatan sistem singlestage dimana tidak adanya hubungan antar proses di setiap stage atau dengan kata lain, proses yang satu independen terhadap proses yang lain. Dengan menggunakan objek penelitian yang sama dengan objek penelitian diatas, penelitian ini kemudian mengangkat permasalahan penentuan ukuran production lot dengan pendekatan multistage. Pertama, dengan menggunakan data-data yang sama dengan penelitian sebelumnya ditentukan ukuran production lot yang optimal dengan metode programa linier. Selanjutnya ukuran production lot digunakan sebegai input simulasi untuk menentukan ukuran transfer batch. Rata-rata panjang antrian dan waktu tunggu menjadi ukuran performansi yang digunakan sebagai acuan penentuan ukuran transfer batch dari beberapa alternatif ukuran yang ada. Pada penelitian ini, ukuran production lot yang dihasilkan sama besarnya dengan demand tiap periode. Sedangkan untuk ukuran transfer batch, hasil penentuan dengan menggunakan simulasi kemudian dimplementasikan ke dalam model. Hasilnya adalah adanya penurunan inventori yang terjadi sebesar 76,35% untuk produk connector dan 50,59% untuk produk box connector dari inventori yang dihasilkan dengan pendekatan singlestage. Kata kunci : multistage, production lot, transfer batch     Abstract   Inventory maintenance and inventory control is a problem that often faced by all organization in many economic sectors. One of challenges that must be faced in inventory control is how to determine the

  4. Kajian Ekosistem Mangrove Hasil Rehabilitasi pada Berbagai Tahun Tanam untuk Estimasi Kandungan Ekstrak Tanin di Pantai Utara Jawa Tengah

    Directory of Open Access Journals (Sweden)

    Erny Poedjirahajoe

    2013-05-01

    Full Text Available Penelitian ini dilakukan di kawasan rehabilitasi mangrove Pantai Utara Pemalang dan Rembang, Dari dua lokasi tersebut masing-masing di pilih tanam mangrove yang sama. Setiap tahun tanam dibagi dalam tiga zona dari arah laut ke darat. Kondisi ekosistem mangrove dikaji melalui pendekatan terhadap pengukuran kerapatan, rata-rata tinggi dan diameter, ketebalan lumpur, salinitas dan kandungan bahan organik pada setiap zonasi dan setiap tahun tanam. Untuk memperkirakan kandungan ekstrak tanin, pada setiap tahun tanam diambil 3 sampel vegetasi (dalam satu zona diambil satu sampel, kemudian dikelupas kulitnya, ditimbang dan dilakukan analisis laboratorium. Kandungan ekstrak tanin dalam satu tahun tanam dapat diestimasi dengan cara menghubungkan dengan nilai kerapatannya. Uji varian untuk dua sifat yang berbeda, dilakukan untuk melihat signifikasi kerapatan tanaman pada setiap tahun tanam pada dua lokasi rehabillitasi mangrove. Hasil penelitian menunjukkan bahwa estimasi kandungan ekstrak tanin di Pemalang dan Rembang pada tahun tanam 2002 rata-rata menunjukkan angka yang lebih tinggi daripada tahun tanam 2003 dan 2006. Pada tahun 2002 di Pemalang, estimasi ekstrak tanin sebesar 105,93 kg/ha sedangkan di Rembang mencapai 159,23 kg/ha. Pada tahun tanam 2006 mangrove di Pemalang mempunyai kandungan ekstrak tanin sekitar 80,90 kg/ha, sedangkan di Rembang sekitar 143,36 kg/ha. Kata kunci: Mangrove, ekosistem, ekstrak tanin.    A Study of Rehabillitated Mangrove Ecosystem in Different Planting Year to Estimate Tannin Extract Content in Northern Coast of Central Java Anstract The research was conducted in the mangrove plantation areas of Pemalang and Rembang North coasts. From those two areas, mangrove vegetations with the same three plantation ages were chosen which were then divided into three zones from the sea. Tree density, height and diameter, the depth of sediment, water salinity and the content of organic matter were measured and assessed for each

  5. PENENTUAN WAKTU PERAWATAN UNTUK PENCEGAHANPADA KOMPONEN KRITIS CYCLONE FEED PUMP BERDASARKAN KRITERIA MINIMASI DOWN TIME

    Directory of Open Access Journals (Sweden)

    Siti Nandiroh

    2006-08-01

    Full Text Available Sistem perawatan mesin yang dilakukan di PT. Newmont Nusa Tenggara, selama ini masih bersifat korektif yaitu perawatan setelah terjadi kerusakan. Kerusakan komponen ini biasanya akan ditandai dengan ditemukannya produk yang dihasilkan tidak sedikit mengalami kecacatan. Peranan perawatan terhadap komponen-komponen Cyclone Feed Pump pada Process Departement - PT.Newmont Nusa Tenggara sangat penting artinya untuk mencegah terjadinya kecacatan produk masal dan mencegah terjadinya down time produksi. Dan perawatan yang paling baik digunakan adalah perawatan pencegahan sebelum terjadinya kerusakan (preventive maintenance. Mesin kritis adalah mesin yang mengalami frekwensi kerusakan terbesar dengan total downtime terbesar. Untuk penentuan mesin kritis ini, langkah pertama yang dilakukan adalah dengan mengukur lamanya waktu downtime produksi dari tiap-tiap mesin yang ada. Perhitungan MTTR berdasarkan data downtime, yang sebelumnya juga dilakukan uji kecocokan distribusi dan hasilnya sesuai, Dengan melakukan perhitungan Mean Time To Repair dan Mean Time To Failure dapat diketahui rata-rata waktu berapa lama pompa beroperasi dan berapa lama pompa tersebut dapat dilakukan perbaikan serta dapat diketahui Reliability pada Cyclone Feed Pump 2.0.1. Setelah dilakukkan perhitungan, komponen kritis Discharge Pipe pada Cyclone Feed Pump 2.0.1 harus sudah dilakukan inspeksi preventif, karena telah beroperasi 664.8 jam, dan perbaikan yang harus lakukan maksimal 3.4997 jam setiap kali dilakukan shutdown.

  6. Penentuan Pelabuhan Hub untuk Crude Palm Oil (CPO Ekspor di Indonesia

    Directory of Open Access Journals (Sweden)

    Eko Andi Haranto

    2013-03-01

    Full Text Available CPO (Crude Palm Oil merupakan salah satu komoditi ekspor terbesar di Indonesia. Moda angkut darat dan sungai menjadi pilihan untuk didistribusikan menuju calon pelabuhan hub. Tugas Akhir ini bertujuan untuk merencanakan pola operasi armada pengangkut CPO, dan penentuan pelabuhan hub untuk ekspor CPO. Metode Transportasi digunakan untuk memilih pabrik pengolahan CPO sebagai pemasok utama. Dari hasil analisis didapatkan bahwa penggunaan moda darat menggunakan truk lebih optimal dibandingkan menggunakan tongkang hal ini dikarenakan kondisi sungai di Kalimantan Tengah yang dangkal. Dengan menggunakan metode transportasi didapatkan empat lokasi pabrik pengolahan minyak kelapa sawit. Pelabuhan hub yang terpilih berlokasi di Bagendang dan Bumi Harjo. Kedua titik tersebut dipilih karena sudah memiliki tangki timbun dan dermaga untuk ekspor CPO, selain itu pemilihan berdasarkan hasil analisa didapatkan biaya dari Pabrik PT. ATLANTIS ke Pelabuhan Bagendang dengan truk berukuran 10 ton memerlukan biaya sebesar Rp. 333.016,25/TRIP/TRUK. Pabrik PT. ATLANTIS II ke Pelabuhan Bagendang Rp. 237.868,75/TRIP/TRUK. Pabrik PT. TIGER ke Pelabuhan Bumi Harjo Rp. 475.737,50/TRIP/TRUK. PT. TIGER II merupakan pabrik yang dapat melakukan pengiriman langsung menggunakan tongkang berukuran 1800 DWT melewati sungai Barito, dengan biaya Rp.123.007.828,27,- /voyage.

  7. Penentuan Kawasan Agroindustri Berbasis Komoditas Unggulan Sektor Pertanian di Kabupaten Probolinggo

    Directory of Open Access Journals (Sweden)

    Firda Nurul Lailia

    2014-09-01

    Full Text Available Tujuan penelitian ini adalah menentukan kawasan agroindustri di Kabupaten Probolinggo yang berbasis komoditas unggulan sektor pertanian. Sasaran pertama yang dilakukan adalah menentukan komoditas unggulan yang potensial menggunakan alat analisis LQ dan Shift-Share, kedua menentukan bobot faktor-faktor penentu kawasan agroindustri menggunakan analisis AHP, kemudian ketiga menentukan kawasan agroindustri berdasarkan komoditas unggulan sektor pertanian Kabupaten Probolinggo dengan analisis penilaian variabel. Hasil studi menunjukkan bahwa terdapat 18 komoditas unggulan yang kemudian dikelompokkan menjadi tiga subsektor unggulan yaitu Subsektor Tanaman Pangan dan Hortikultura, Subsektor Peternakan dan Subsektor Perikanan. Dalam penentuan kawasan agroindustri, faktor ketersediaan bahan baku memiliki nilai bobot (tingkat pengaruh paling besar baik untuk subsektor tanaman pangan dan hortikultura, subsektor peternakan, dan subsektor perikanan. Berdasarkan analisa penilaian variabel adapun kecamatan yang terpilih sebagai kawasan yang paling potensial sebagai kawasan agroindustri subsektor tanaman pangan dan hortikultura yaitu Kecamatan Tongas dengan komoditas unggulan mangga dan jagung, kawasan agroindustri subsektor peternakan yaitu Kecamatan Kraksaan dengan komoditas unggulan sapi potong, dan kawasan agroindustri perikanan di Kecamatan Paiton dengan komoditas unggulan perikanan laut.

  8. IMPLEMENTASI FUZZY TSUKAMOTO DALAM PENENTUAN KESESUAIAN LAHAN UNTUK TANAMAN KARET DAN KELAPA SAWIT

    Directory of Open Access Journals (Sweden)

    Maya Yusida

    2017-09-01

    Full Text Available Land suitability is the suitability of a plot of land for a particular use. In the determination of appropriate plant recommendations on land, the Banjarbaru Swampland Food Crops Research Institute sets out 8 criteria in its assessment. These criteria include Soil Depth (cm, CEC Soil (cmol, Saturation Bases (%, pH (H2O, C-Organic (%, N Total (%, P2O5 (mg / 100g, K2O (mg / 100g. Making this expert system using Fuzzy Tsukamoto method. The results obtained from this expert system in the form of data on land suitability for rubber and palm oil plantations that are prioritized to be planted in a field based on the growing requirements of a plant. Keywords: Expert System, Land Suitability, Fuzzy Tsukamoto Kesesuaian lahan adalah kecocokan sebidang lahan untuk penggunaan tertentu. Dalam penentuan rekomendasi tanaman yang sesuai terhadap lahan, Balai Penelitian Tanaman Pangan Lahan Rawa Banjarbaru menetapkan 8 kriteria dalam penilaiannya. Kriteria tersebut meliputi Kedalaman Tanah (cm, KTK Tanah (cmol, Kejenuhan Basa (%, pH (H2O, C-Organik (%, N Total (%, P2O5 (mg/100g, K2O (mg/100g. Pembuatan sistem pakar ini menggunakan metode Fuzzy Tsukamoto. Hasil yang didapat dari sistem pakar ini berupa data tingkat kesesuaian lahan untuk tanaman karet dan kelapa sawit yang lebih diprioritaskan untuk ditanam disuatu lahan berdasarkan syarat tumbuh suatu tanaman. Kata Kunci : Sistem Pakar, Kesesuaian Lahan, Fuzzy Tsukamoto

  9. PENENTUAN STANDARD SETTING MATA PELAJARAN KIMIA DENGAN METODE ANGOFF, IRT (ITEM RESPONSE THEORY, DAN SPLINES CUBIC HERMIT FUNCTION

    Directory of Open Access Journals (Sweden)

    s suwahono

    2016-03-01

    Pada metode diatas, butir-butir tes ditentukan tingkat kesulitannya, ke- mudian butir-butir tersebut diurutkan berdasarkan tingkat kesulitannya yang selanjutnya menjadi nomor halaman. Pelaksanaan metode ini melibatkan guru kimia berpengala- man sebagai panelis yang menentukan pada halaman bera- pa peserta mulai tidak bisa mengerjakan, dan memerlukan suatu tes/perangkat ujian mata pelajaran kimia yang ter- standar, dan instrumen sederhana untuk menuliskan hasil tiap panelis. Tahap pelaksanaan yaitu pelatihan, putaran 1, dan putaran 2. Rerata hasil putaran 1 dan 2 merupakan hasil penentuan batas kelulusan mata pelajaran kimia

  10. ANALISIS RISIKO KANDUNGAN LOGAM KROMIUM HEKSAVALEN (CR6+ DAN ARSEN (AS DALAM AIR MINUM

    Directory of Open Access Journals (Sweden)

    Ahmad Mursidi

    2015-11-01

    Full Text Available Abstract: Risk Analysis Metal Content of Hexavalent Chromium (Cr6 + and arsenic (As in drinking water. The research objective is to determine estimates of health risks from exposure to hexavalent chromium metal and arsenic in drinking water. Research conducted on Kalanganyar population that uses clean water supply wells for drinking water as many as 200 people, and the examination of samples of drinking water as many as 32 samples. Design research using cross-sectional design using the descriptive-analytic method. The results showed that the percentage of respondents who have a non-cancerous disease risk due to exposure to hexavalent chromium (RQ≥1 by 16%, while the percentage of respondents that have exceeded the risk of non-cancer diseases due to exposure to arsenic (RQ≥1 by 59%. The risk of cancer due to arsenic exposure on average the respondents amounted to 1.5 per 10,000 population. The concentration of hexavalent chromium has relation with health risk (p <0.05 with r = 0.927. Arsenic concentrations also have a relationship with a health risk (p <0.05 with r = 0.936. Abstrak : Analisis Risiko Kandungan Logam Kromium Heksavalen (Cr6+ Dan Arsen (As Dalam Air Minum. Tujuan penelitian yaitu untuk mengetahui perkiraan risiko kesehatan akibat pajanan logam kromium heksavalen dan arsen dalam air minum. Penelitian dilakukan terhadap penduduk Kalanganyar yang menggunakan sarana air bersih sumur gali sebagai sumber air minum sebanyak 200 orang, dan pemeriksaan sampel air minum sebanyak 32 sampel. Rancang penelitian menggunakan desain Cross Sectional dengan menggunakan metode deskriptif analitik. Hasil penelitian menunjukkan bahwa persentase responden yang mempunyai risiko penyakit non kanker akibat pajanan kromium heksavalen (RQ≥1 sebesar 16%, sedangkan persentase responden yang telah melampaui batas risiko penyakit non kanker akibat pajanan arsen (RQ≥1 sebesar 59%. Besar risiko kanker akibat pajanan arsen rata-rata pada responden sebesar 1

  11. Penentuan Batas Pengelolaan Wilayah Laut Antara Provinsi Jawa Timur dan Provinsi Bali Berdasarkan Undang-Undang Republik Indonesia Nomor 23 Tahun 2014

    Directory of Open Access Journals (Sweden)

    Rainhard Sumarto Simatupang

    2017-01-01

    Full Text Available Undang-Undang Republik Indonesia Nomor 23 Tahun 2014 Tentang Pemerintahan Daerah merupakan pembaharuan dari undang-undang sebelumnya yaitu Undang-Undang Nomor 32 Tahun 2004 dikarenakan beberapa hal yang sudah tidak sesuai lagi dengan perkembangan keadaan pada saat ini[1]. Beberapa perubahan peraturan dalam hal penentuan batas wilayah pengelolaan laut daerah yang terkandung dalam Undang-Undang Nomor 23 Tahun 2014 dari undang-undang sebelumnya yaitu mengenai penentuan garis pantai, batas wilayah bagi hasil kabupaten/kota, serta kewenangan setiap daerah baik provinsi maupun kabupaten/kota. Dalam Undang-Undang Nomor 23 Tahun 2014 ditetapkan bahwa batas maksimal wilayah laut provinsi sejauh 12 mil laut, sedangkan batas bagi hasil kelautan kabupaten/kota maksimal sejauh 4 mil laut. Apabila wilayah laut antar provinsi tidak mencapai batas maksimal masing-masing, maka batas akan dibagi sama jarak dengan prinsip garis tengah (median line. Penelitian ini merupakan bentuk pengaplikasian Undang-Undang Nomor 23 Tahun 2014 dalam memperbaharui penentuan batas pengelolaan wilayah laut daerah. Dalam penelitian ini  dibahas bagaimana menentukan batas pengelolaan wilayah laut daerah serta dilakukan analisa dari hasil penentuan batas pengelolaan wilayah laut. Lokasi Penelitian ini adalah Provinsi Jawa Timur dan Provinsi Bali tepatnya perbatasan pada Kabupaten Banyuwangi (Jawa Timur dan Kabupaten Buleleng (Bali sampai Kabupaten Jembrana (Bali. Penentuan batas pengelolaan wilayah laut dilakukan dengan metode kartometrik menggunakan data Citra Satelit SPOT 7 2015 dan data Peta Lingkungan Pantai Indonesia (LPI 2002. Dari penelitian ini dihasilkan median line sepanjang 40,3 km yang dibentuk oleh 41 titik, serta diperoleh luas wilayah pengelolaan laut Provinsi Jawa Timur sebesar 233,37 km2 dan Provinsi Bali sebesar 233,77 km2 (sesuai batasan lokasi dengan selisih sebesar 0,4 km2 serta batas wilayah bagi hasil kelautan untuk kabupaten/kota. Dihasilkan juga peta batas

  12. Sistem Pendukung Keputusan Dalam Penentuan Pertukaran Pelajar Di Sma Negeri 2 Tasikmalaya Dengan Metode Analytical Hierarchy Process (Ahp

    Directory of Open Access Journals (Sweden)

    Teuku Mufizar

    2017-07-01

    Full Text Available SMAN 2 Tasikmalaya adalah salah satu sekolah yang terpilih sebagai mitra Universitas Pendidikan Indonesia dalam program pertukaran pelajar ke Australia. Dalam proses pemilihan dan penilaian peserta saat ini masih belum efektif ,hal ini mengakibatkan keraguan dalam pengambilan keputusan yang memungkinkan terjadi kesalahan keputusan yang kurang tepat. Peserta yang terpilih kadang jauh dari yang diharapkan karena peserta tersebut tidak memiliki kriteria yang layak. Maka dari itu diperlukan sebuah sistem pendukung keputusan yang bisa mengoptimalkan dalam penentuan pertukaran pelajar. dalam sistem pendukung keputusan ini didukung oleh suatu metode dalam pengambilan keputusan yaitu metode Analytical Hierarchy Process (AHP yang dikonversikan kedalam bahasa pemrograman Visual Basic.NET yang dapat menunjang dalam pengolahan data. alat bantu pemodelan sistemnya menggunakan Data Flow Diagram (DFD, sedangkan teknik perancangan basisdata menggunakan Entity Relationship Diagram (ERD. Adapun Kriteria yang ditetapkan oleh sekolah diantaranya : Nilai Toefl, Ranking, Nilai Wawancara, Nilai Pengetahuan Indonesia, Nilai Pengetahuan Australia, Nilai Kesenian, Nilai Kepribadian. Hasil akhir dari penelitian ini didapatkan bahwa sistem pendukung keputusan dalam penentuan pertukaran pelajar di SMA Negeri 2 tasikmalaya dengan metode Analytical Hierarchy Process (AHP dapat membantu pengambil keputusan dalam menentukan peserta yang terpilih.

  13. CLUSTERING PENENTUAN POTENSI KEJAHATAN DAERAH DI KOTA BANJARBARU DENGAN METODE K-MEANS

    Directory of Open Access Journals (Sweden)

    Sri Rahayu

    2016-09-01

    menjadi dua, yaitu pengelompokan untuk pemahaman dan pengelompokan untuk penggunaan.Metode K-Means merupakan metode untuk teknik clustering yang paling sederhana dan umum.K-Means merupakan salah satu metode pengelompokan data nonhirarki (sekatan yang berusaha mempartisi data yang ada ke dalam bentuk dua atau lebih kelompok. Metode ini mempartisi data ke dalam kelompok sehingga data berkarakteristik sama dimasukkan ke dalam satu kelompok yang sama dan data yang berkarakteristik berbeda dikelompokkan ke dalam kelompok yang lain. Tujuan dari pengelompokan ini adalah untuk meminimalkan fungsi objektif yang diset dalam proses pengelompokan, yang pada umumnya berusaha meminimalkan variasi di dalam suatu kelompok dan memaksimalkan variasi antar kelompok.Data yang ditambang untuk clustering penentuan potensi kejahatan daerah di kota Banjarbaru yaitu data kejahatan yang dimiliki oleh kepolisian Polres di kota Banjarbaru.Sehingga penelitian ini bertujuan untuk mengkaji tahapan teknik clustering dan membangun clustering penentuan potensi kejahatan daerah di kota Banjarbaru. Kata kunci:Clustering, Data mining,K-Means, K-Means Clustering

  14. KRITERIA KUALITATIF PENENTUAN PRODUK UNGGULAN KOMODITAS PERKEBUNAN DENGAN METODE DELPHI DI KABUPATEN KOLAKA-SULAWESI TENGGARA

    Directory of Open Access Journals (Sweden)

    Dhian Herdhiansyah

    2013-06-01

    Full Text Available The determination of the main product of plantation commodity in kolaka has not been done. The purpose of this research were to composing an order of main product of plantation commodity in Kolaka. The object of this research were alternative 17 of plantation commodity. The determination of strategic indicators as the selection criteria of the main products were done by a panel of researchers that experts in different fields in plantation scope. In the effort to reach of the consensus, they were accordance with the Delphi Method. There are seven strategic indicators used as the criteria in determination of the main product of plantation commodity in Kolaka as followed: (1 based on the local resource potential, (2 enhancing to acces domestic and global market, (3 to produce high added value, (4 supported by technology and qualified human resources, (5 eco-friendly product by applying eco-friendly technology and have optimum agriculture waste as well as apply good waste management, (6 implement cooperation principle and business oriented, and (7 administratively and economically feasible for business development. The result of score calculation on the each indicator showed that the main product of plantation commodity were cacao on the first with score 4.6, clove and pepper on the second with score 4.3, and cashew, coconut, and coffee on the third with score 4.2.   Keywords: Determination of the main product, Delphi method, plantation of the commodity   ABSTRAK   Penentuan produk unggulan komoditas perkebunan di Kabupaten Kolaka selama ini belum dilakukan. Penelitian ini bertujuan untuk memunculkan suatu urutan produk unggulan komoditas perkebunan di Kabupaten Kolaka. Objek penelitian ini adalah 17 alternatif komoditas perkebunan. Penetapan indikator strategis sebagai kriteria pemilihan produk unggulan komoditas perkebunan dilakukan oleh sekelompok panel peneliti yang memiliki latar belakang kebidangan berbeda dalam lingkup perkebunan.  Dalam

  15. Efektivitas Desensitizing Agent dengan dan tanpa Fluor pada Metode in Office Bleaching terhadap Kandungan Mineral Gigi (Kajian In Vitro

    Directory of Open Access Journals (Sweden)

    Yulita Kristanti

    2015-12-01

    Full Text Available In office bleaching menggunakan hidrogen peroksida 40% sering memberikan efek samping berupa linu baik selama maupun setelah perawatan tersebut dilakukan. Penelitian ini dilakukan dengan tujuan untuk mengetahui pengaruh waktu aplikasi dan kandungan fluor desensitizing agent pada metode in office bleaching terhadap kandungan mineral gigi. Delapan gigi masing-masing dipotong menjadi 4 bagian, 6 potong digunakan untuk pemeriksaan XRD awal. Gigi dikeringkan dalam oven suhu 50° selama 30 menit diserbuk, diambil 1 mg untuk diperiksa kandungan mineralnya dengan goniometer. Dua puluh empat potong yang lain dibagi dalam 4 kelompok perlakuan. Kelompok I: gigi diaplikasi bahan bleaching 0,5-1 mm hidrogen peroksida 40% selama 1 jam, dicuci, dikeringkan, diikuti aplikasi 0,1 ml desensitizing agent tanpa fluor (CPP-ACP selama 30 menit, dicuci, dikeringkan. Kelompok II : gigi diaplikasi CPP-ACP 30 menit, dicuci, dikeringkan, dibleaching menggunakan hidrogen peroksida 40% selama 1 jam. Selanjutnya gigi diaplikasi CPP-ACP 30 menit lagi, dicuci, dikeringkan. Kelompok III gigi dibleaching menggunakan hidrogen peroksida 40% selama 1 jam, dicuci, dikeringkan, diikuti aplikasi desensitizing agent yang mengandung fluor (CPP-ACFP selama 30 menit, dicuci, dikeringkan. Kelompok IV: gigi diaplikasi CPP-ACFP 30 menit, dicuci, dikeringkan, dibleaching menggunakan hidrogen peroksida 40% selama 1 jam. Selanjutnya gigi diaplikasi CPP-ACFP selama 30 menit, dicuci dikeringkan. Sesudah perlakuan, semua gigi dilakukan pemeriksaan kandungan mineral gigi dengan prosedur yang sama. Uji Mann Whitney menunjukkan penurunan mineral paling sedikit terjadi pada kelompok IV (4500. Desensitizing agent mengandung F sebelum dan sesudah perlakuan in office bleaching menunjukkan penurunan mineral paling kecil.   The Effectiveness of Desensitizing Agent with and without Fluorine in Office Bleaching Method to Tooth Mineral content. Tooth sensitivity arises during or after an in

  16. Penentuan Skala Prioritas Penanganan Jalan Kabupaten di Kabupaten Kudus Dengan Metode Analytical Hierarchy Process

    Directory of Open Access Journals (Sweden)

    Hafit Irawan

    2016-12-01

    Full Text Available Pelaksanaan penanganan jalan di Kabupaten Kudus banyak terjadi ketidakseimbangan paket-paket pekerjaan penanganan jalan seperti banyaknya jalan yang belum mendapat penanganan baik pemeliharaan maupun peningkatan. Selama ini yang digunakan dalam penentuan skala prioritas penanganan jalan didasarkan pada ketersediaan anggaran dan nilai manfaat finansial jalan saja. Tujuan penelitian ini adalah memperoleh urutan prioritas penanganan jalan di Kabupaten Kudus, secara tepat dengan melibatkan pihak-pihak yang terkait. Penelitian ini menggunakan metode AHP dengan 5 (lima kriteria yang dipakai untuk menentukan prioritas penanganan jalan, yaitu kerusakan jalan, mobilitas, volume lalu lintas, tingkat aksesibilitas, dan pengembangan wilayah. Berdasarkan analisa AHP diperoleh tingkat kepentingan bobot masing-masing kriteria untuk menentukan prioritas penanganan jalan. Hasil penelitian menunjukkan bahwa kriteria kerusakan jalan memperoleh bobot tertinggi, yaitu 45,06% kemudian kriteria mobilitas 20,62%, kriteria volume lalu lintas 14,53%, kriteria tingkat aksesibilitas 12,78%, dan kriteria pengembangan wilayah 7,01%. Kesimpulan dari penelitian ini bahwa perlu adanya kriteria-kriteria sebagai tolok ukur untuk menentukan dalam prioritas penanganan jalan agar pengalokasian anggaran tepat sasaran.Saran dari penelitian ini dalam menentukan prioritas penanganan jalan di Kabupaten Kudus sebaiknya mempertimbangkan beberapa kriteria sebagai dasar prioritas penanganan jalan.  [Title: The Determination of The scale Priorities for Handling in Kudus Use Analytical Hierarchy Process Method]. The implementation of the road handling in Kudus, in fact is found many imbalances packets roads handling jobs like many roads yet had a good handling maintenance and enhancement. So far in setting priorities scale was based on an assessment of the availability of the budget and the value of the financial benefits. The purpose of this study is to obtain an assessment of the priority

  17. Optimasi Kandungan Gizi Susu Kambing Peranakan Etawa (PE Menggunakan ELM-PSO Di UPT Pembibitan Ternak Dan Hijauan Makanan Ternak Singosari-Malang

    Directory of Open Access Journals (Sweden)

    Imam Cholissodin

    2017-02-01

    Full Text Available Abstrak Susu merupakan salah satu sumber protein hewani yang mengandung semua zat yang dibutuhkan tubuh. Ternak penghasil susu utama di Indonesia yaitu sapi perah, namun produksi susunya belum dapat mencukupi kebutuhan masyarakat. Alternatifnya adalah kambing peranakan etawa (PE. Tingginya kualitas kandungan gizi susu sangat dipengaruhi oleh beberapa faktor salah satunya, yaitu faktor pakan. Bagian peternakan kambing PE di UPT Pembibitan Ternak dan Hijauan Makanan Ternak Singosari-Malang masih menghadapi permasalahan, yaitu rendahnya kemampuan dalam memberikan komposisi pakan terhadap kambing PE. Kekurangan tersebut berpengaruh terhadap kualitas susu yang dihasilkan. Diperlukan pengetahuan rekayasa kandungan gizi susu untuk menentukan komposisi pakan dalam menghasilkan susu premium dengan kandungan gizi optimal. Penulis menggunakan metode Extreme Learning Machine (ELMdan Particle Swarm Optimization (PSO  untuk membuat pemodelan pakan kambing dalam mengoptimasi kandungan gizi susu kambing. Dalam analisa pengujian konvergensi menggunakan metode ELM-PSO yang dilakukan dengan kasus untuk berat badan kambing 32 kg, serta jenis pakan yang digunakan yaitu rumput Odot 70% dan rumput Raja 30% menghasilkan sistem mencapai kestabilan dalam konvergensi pada iterasi ke-20 dengan fitness terbaik yaitu 16.2712. Kata Kunci: Susu Kambing, Optimasi, Artificial Neural Network (ANN, Particle Swarm Optimization (PSO, Genetic Algorithm (GA, Kandungan Nutrisi Pakan. Abstract Milk is one of the animal protein sources which it contains all of the substances needed by human body. The main milk producer cattle in Indonesia is dairy cow, however its milk production has not fulfilled the society needs. The alternative is the goat, the Etawa crossbreed (PE. The high quality of milk nutrients content is greatly influenced by some factors one of them, is the food factor. The PE goat livestock division of the UPT Cattle Breeding and the Cattle Food Greenery in Singosari

  18. KANDUNGAN KADMIUM (Cd PADA TANAH DAN CACING TANAH DI TPAS PIYUNGAN, BANTUL, DAERAH ISTIMEWA YOGYAKARTA (Cadmium (Cd Content in Soil and Earthworms in Piyungan Controlled Landfill Municipal Waste Disposal, Bantul Yogyakarta Special District

    Directory of Open Access Journals (Sweden)

    Heny Mayasari Setyoningrum

    2014-10-01

    Full Text Available ABSTRAK Analisis kandungan logam berat cadmium (Cd pada tanah dan cacing tanah telah dilakukan di TPAS Piyungan Bantul untuk mengetahui tingkat pencemaran Cd dalam tanah. Penelitian dibagi menjadi penelitian di lapangan yang meliputi pengambilan sampel tanah-cacing tanah dan pengukuran parameter lingkungan, serta penelitian di laboratorium yang meliputi analisis kandungan kadmium, bahan organik dan tekstur tanah. Tingkat pencemaran kadmium ditentukan menggunakan Indeks Kontaminasi-Polusi. Hasil penelitian memperlihatkan kandungan kadmium pada tanah di TPAS Piyungan antara tidak terdeteksi (< 0.01 – 0.47 ppm. Kandungan kadmium di TPAS Piyungan lebih rendah dibandingkan jumlah maksimum kadmium yang diperbolehkan di tanah dan khusus untuk zona III dan zona I titik sampling 1 dan 2 lebih tinggi dari standar kandungan kadmium pada tanah yang bebas polusi, sedangkan kandungan kadmium pada tanah kontrol lebih rendah dibandingkan kandungan kadmium secara umum pada tanah bebas polusi tersebut. Kandungan kadmium dalam tanah di lokasi TPAS tidak selalu lebih tinggi bila dibanding kontrol. Cacing tanah mengandung kadmium antara 0.35 – 0.45 ppm, kandungan kadmium dalam cacing tanah di beberapa lokasi TPAS lebih rendah dibanding kontrol. Tingkat pencemaran kadmium di TPAS Piyungan berada pada tingkat kontaminasi sangat ringan hingga kontaminasi sangat berat. Lokasi TPAS yang masih aktif digunakan memiliki tingkat kontaminasi lebih tinggi bila dibanding lokasi lain. Rasio kadmium pada tanah dan cacing tanah di TPAS Piyungan adalah 0.13 : 1.75.   ABSTRACT Cadmium (Cd analysis has been done at Piyungan TPAS (Piyungan TPAS, stands for Tempat Pembuangan Akhir Sampah for knowing the level of Cd contamination insoil. The research was divided into in-sites study, which consisted of soil and earthworms sampling, and soil environmental factors measurement, and laboratory analysis, which consisted of cadmium content, organic compounds and soil textures analysis

  19. PENENTUAN FAKTOR YANG BERPENGARUH DALAM FAULTY BEHAVIOR RISK MELALUI PENDEKATAN METODE FUZZY ANALYTIC HIERARCHY PROCESS

    Directory of Open Access Journals (Sweden)

    Rizal Irfan Fuadi

    2015-06-01

    Full Text Available Manajemen keselamatan merupakan pengorganisasian, sumber daya manusia, kebijakan dan prosedur interaktif yang bertujuan untuk mengurangi kemungkinan kerusakan dan kerugian di tempat kerja. Salah satu cara untuk memperbaiki manajemen keselamatan di perusahaan adalah dengan melakukan penelitian mengenai faktor yang berpengaruh dalam risiko kesalahan perilaku. Secara umum, faktor-faktor yang mempengaruhi keselamatan kerja tidak memiliki struktur fisik. Untuk itu, maka masalah pada kondisi nyata dapat direpresentasikan dengan cara yang lebih baik menggunakan angka fuzzy untuk mengevaluasi faktor-faktor ini. Pada penelitian ini, pendekatan Fuzzy AHP bertujuan untuk menentukan tingkat Faulty Behavior Risk (FBR pada sistem kerja.Penentuan faktor yang berpengaruh dalam Faulty Behavior Risk (FBR/risiko dari perilaku yang salah dimulai dengan menentukan responden, penyusunan kuesioner, uji validitas dan reliabilitas, hasil dari kuesioner dijadikan inputan dalam pengolahan data dengan metode FuzzyAnalytic Hierachy Process (FAHP. Kuesioner ini dibuat berdasarkan konsep safety management yang terdiri dari 4 faktor, yaitu faktor organisasi, faktor pribadi, faktor pekerjaan dan faktor lingkungan. Penelitian ini dilakukan pada Bay 2.1 yang memproduksi panel dan bay 7.1 yang memproduksi finning. Berdasarkan perhitungan FBR pada bay 2.1 menunjukkan nilai 0,4793 yang berarti risiko kesalahan perilaku di antara batas bawah (0,25 dan batas atas (0,50. Sedangkan pada bay 7.1 sebesar 0,5317 yang berarti risiko kesalahan perilaku memiliki potensi tinggi karena berada di atas batas atas. Dari hasil penentuan FBR didapatkan nilai  pada bay 2.1 yang memiliki risiko penyebab tertinggi terdapat pada sub faktor kurang persiapan (0,0788 sedangkan pada bay 7.1 dengan nilai FBR sebesar 0,5317 yang memiliki risiko tertinggi terdapat pada sub faktor kelelahan kerja (0,0970. Melalui penelitian ini, faktor penyebab kesalahan perilaku kerja dapat diketahui dan diberikan

  20. KANDUNGAN BAHAN ORGANIK DAN AKUMULASI MINERAL TANAH PADA BANGUNAN SARANG RAYAP TANAH Macrotermes gilvus Hagen (BLATTODEA: TERMITIDAE

    Directory of Open Access Journals (Sweden)

    Niken Subekti

    2012-03-01

    Full Text Available Rayap Macrotermes gilvus Hagen mempunyai peranan ekologis rayap tanah M. gilvus sebagai degradator primer di dalam hutan, eksplorasi perananannya sebagai agen biologis dalam perbaikan vegetasi dan perbaikan kualitas tanah. Rayap dapat memodifikasi sifat fisik dan kimia tanah. Penelitian tentang kandungan bahan organik telah dilakukan dengan analisis proksimat (metode Weende, sementara akumulasi mineral tanah menggunakan metode X-Ray berdasarkan Analysis Program Cristallynity. Rayap M. gilvus Hagen merupakan komponen penting dalam memodifikasi beragam mineral dari tanah disekitarnya. Hasil penelitian menunjukkan bahwa terdapat perbedaan nyata antara komposisi mineral tanah dalam sarang rayap M. gilvus Hagen dengan mineral tanah disekitar sarang. Hasil penelitian menunjukkan kandungan bahan organik dalam bangunan sarang menghasilkan sebesar 98.33% dan padatannya 1.67%. Padatan ini terdiri dari karbohidrat sebesar 3.16%, abu 4.19%, lemak 23.95%, protein sebesar 39.52%, dan sisanya 29.18% berupa mineral-mineral. Bangunan sarang rayap yaitu SiO2 dan Despujolsite yang dibawa dari lingkungan sekitar kedalan bangunan sarang. Unsur-unsur yang lain diperoleh dari sebagian material yang berasal dari saliva, humus dan tanah sekitar sarang. The termite Macrotermes gilvus Hagen plays an ecological role. Subterranean termites M. gilvus is considered as the primary degradator in the forest, and therefore the exploration of its role as the biological agent to recover the vegetation and soil quality might be useful. Termites could modify the physical and chemical nature of soil. M. gilvus Hagen was an important component in modifying various minerals of the surrounding soil.  Research on the content of the organic materials had been proximat analysis (Weende methode, and the accumulation of soil mineral structure in the mound with X-Ray Methode (Analysis Program Cristallynity 2006. The result of the research indicated that there was significant difference

  1. Penentuan konsentrasi stainless steel 316L dan kobalt kromium remanium GM-800 pada uji GPMT

    Directory of Open Access Journals (Sweden)

    Ikmal Hafizi

    2016-12-01

    Full Text Available Concentration determination of stainless steel 316L and cobalt chromium remanium GM - 800 on GPMT test. Dentistry had used metals such as cobalt chromium and stainless steel in maxillofacial surgery, cardiovascular, and as a dental material. 316L stainless steel is austenistic stainless steel which has low carbon composition to improve the corrosion resistance as well as the content of molybdenum in the material. Cobalt chromium (CoCr is a cobaltbased alloy with a mixture of chromium. Density of a metal cobalt chromium alloy is about 8-9 g/cm3 that caused metal interference relatively mild. Remanium GM-800 is one type of a cobalt chromium alloy with the advantages of having high resistance to fracture and high modulus of elasticity. This study aims to determine the exact concentration used in 316L stainless steel and cobalt chromium GM-800 as the GPMT test material. Subjects were cobalt chromium Remanium GM-800 and 316L stainless steel concentration of 5%, 10%, 20%, 40% and 80%. Patch containing stainless steel or cobalt chromium paste was af xed for 24 hours each on three experimental animals, then the erythema and edema were observed using the Magnusson and Kligman scale. In the study, concentration of 5% is the concentration recommended for stainless steel 316L and cobalt chromium GM-800 as material in challenge phase GPMT test, while the concentration of 40% is the concentration recommended for stainless steel 316L and cobalt chromium GM-800 in the induction phase. ABSTRAK Dunia kedokteran gigi banyak menggunakan logam pada pembedahan maxillofacial, cardiovascular, dan sebagai material dental. Logam yang banyak digunakan antara lain adalah kobalt kromium dan stainless steel. Stainless steel 316L merupakan austenistic stainless steel yang memiliki komposisi karbon rendah sehingga dapat meningkatkan ketahanan terhadap korosi sama halnya dengan kandungan molybdenum pada material tersebut. Kobalt kromium (CoCr adalah cobalt-based alloy dengan

  2. Pengaruh Campuran Ampas Tebu Dan Alang-Alang (Imperata Cylindrica) Sebagai Media Pertumbuhan Terhadap Kandungan Nutrisi Jamur Tiram Putih (Pleurotus Ostreatus)

    OpenAIRE

    Naila, Ishmatun; Purnomo, Adi Setyo

    2016-01-01

    Penelitian ini bertujuan untuk mengetahui pengaruh ampas tebu dan alang-alang (Imperata cylindrica) sebagai media pertumbuhan jamur tiram putih (Pleurotus ostreatus) terhadap kandungan nutrisinya. Ampas tebu dan alang-alang dipilih sebagai media pertumbuhan alternatif, karena tidak hanya mengandung lignoseluosa, tapi juga tersedia berlimpah di lingkungan. Variasi komposisi ampas tebu:alang-alang yang digunakan adalah 75:25 (A1); 50:50 (A2); 25:75 (A3); 0:100 (A4); dan 100:0 (A5). Pada penelit...

  3. STATUS TROFIK PERAIRAN RAWA PENING DITINJAU DARI KANDUNGAN UNSUR HARA (NO3 dan PO4 SERTA KLOROFIL-a

    Directory of Open Access Journals (Sweden)

    Naila Zulfiah

    2016-03-01

    Full Text Available Danau Rawa Pening merupakan danau alami yang multi fungsi yaitu sebagai pembangkit listrik, irigasi, perikanan, air baku dan pariwisata. Aktivitas antropogenik manusia mendorong terjadinya perubahan status trofik perairan. Ledakan populasi fitoplankton dan tumbuhan air terapung merupakan indikasi terjadinya eutrofikasi  di danau ini. Tujuan penelitian ini adalah untuk mengetahui status terkini kondisi kesuburan Perairan Rawa Pening dengan pendekatan nilai unsur hara (nitrat dan fosfat serta hubungannya dengan klorofil-a. Penelitian dilaksanakan pada bulan Mei-Juni 2007 di Perairan Rawa Pening. Parameter kimia seperti nitrat, fosfat dan klorofil-a dianalisa di laboratorium menggunakan metode spektrofotometri. Selain itu dilakukan pengukuran insitu beberapa parameter fisika dan kimia (suhu, kecerahan, kedalaman dan pH. Hubungan antara nitrat dan fosfat terhadap klorofil-a dianalisa dengan regresi linier berganda menggunakan software Excel 2007. Hasil penelitian menunjukkan bahwa kisaran nilai nitrat, fosfat dan klorofil-a pada Bulan Mei dan Juni masing-masing adalah 1,38–2,18 mg/L dan 1,32–2,12 mg/L (eutrofik; 0,013–0,030 mg/L dan 0,012–0,031 mg/L (mesotrofik serta 4,67-7,22 mg/L dan 4,71–7,30 mg/L (mesotrofik. Persamaan hubungan antara nitrat dan fosfat terhadap klorofil pada Bulan Mei dan Juni sebagai berikut Y = 0,549 + 2,599 X1 + 36,513 X2 (R2=0,97 dan Y = 1,457 + 1,628 X1 + 73,638 X2 (R2=0,97. Peningkatan kandungan klorofil-a di Rawa Pening berbanding lurus dengan kandungan nitrat dan fosfat. Konsentrasi nitrat pada Bulan Mei sangat mempengaruhi konsentrasi klorofil sementara pada Bulan Juni terjadi sebaliknya dimana fosfat yang berpengaruh besar terhadap klorofil-a.   Rawa Pening Lake is a natural lake that has multi-function as electricity  power, irrigation, fisheries, raw water as well as tourism. Human anthropogenic activities around lake lead to the changes of trophic status of waters. Eutrophycation indicated by blooming

  4. ANALISIS PEMANFAATAN JEJARING SOSIAL UNTUK PENENTUAN KONSENTRASI MAHASISWA DENGAN METODE SOCIAL NETWORK ANALYSIS (Studi Kasus: Universitas Nusantara PGRI Kediri

    Directory of Open Access Journals (Sweden)

    Risky Aswi R

    2015-08-01

    Full Text Available Analisis pemanfaatan  jejaring  sosial untuk penentuan konsentrasi mahasiswa dengan metode sosial network analysis. Tujuan dibangun sistem ini untuk menentukan konsentrasi mahasiswa dengan pendekatan Sosial Network Analisis Studi Kasus Jejaring Sosial Facebook dan mampu memanfaatkan facebook sebagai alat untuk menentukan konsentrasi mahasiswa jurusan teknik informatika menjadi tiga bagian yaitu pemrograman, jaringan, dan multimedia. Batasan yang digunakan dalam penelitian ini adalah penelitian ini hanya berlaku pada mahasiswa yang memiliki akun facebook. Penelitian ini menggunakan Social Network Analysis untuk mencari between centrality.Pada tahap pertama setiap akun akan dilihat relasinya setelah itu hubungan antar akun akan dimasukan ke node XL dan akan menghasilkan between centrality. Mahasiswa yang melanjutkan proses selanjutnya adalah mahasiswa yang nilai betweent centralitynya 85% teratas. Setelah itu akan ditambahkan variabel group yang digunakan untuk mengkelompokan peminatan, dan ditambahkan variabel nilai akademis untuk menguatkan pendapat yang diperoleh sebelumnya.Dengan cara melihat between centrality dan menambahkan variabel group untuk membagi siswa sesuai konsentrasi, dan memabahkan variabel nilai akademik untuk memperkuat pendapat. Sosial network analysis terbukti dapat menentukan konsentrasi mahaiswa. Facebook dapat digunakan sebagai alat untuk menentukan konsentrasi mahasiswa, konsentrasi mahasiswa dibagi menjadi pemrograman, jaringan, dan multimedia. Kata Kunci : Jejaring Sosial, Social Network Analysis, between centrality

  5. Penentuan Rute Patroli Sekuriti Optimal Dengan Menggunakan Metode Nearest Neighbour Dan Insertion (Studi Kasus : South Processing Unit PT. X

    Directory of Open Access Journals (Sweden)

    Fuaddillah Fuaddillah

    2017-03-01

    Full Text Available South Processing Unit (SPU merupakan salah satu lapangan migas di PT. X dengan estimasi harian produksi gas sekitar 450 gas (MMscf/d dan 5000 kondensat (BOPD. Gas dan kondesat yang terpisah dari masing-masing sumur produksi akan dikumpulkan ke dalam satu stasiun pengumpul yang disebut Gathering and Testing Satellite (GTS. Karena statusnya sebagai objek vital nasional, melakukan patroli sekuriti di laut antara GTS yang satu dengan GTS lainnya wajib dilakukan. Proses patroli sekuriti dengan seatruck pada kawasan SPU PT. X masih menggunakan intuisi dari supir seatruck dimana rute yang dipilih adalah rute yang dirasa lebih dekat, lebih nyaman dilalui, dan lebih familiar dengan pengetahuan supir sendiri sehingga menghasilkan total jarak tempuh yang lebih jauh. Penelitian ini bertujuan untuk menerapkan dan membandingkan metode intuitif yang dilakukan oleh supir seatruck dengan metode nearest neighbour dan metode insertion dalam permasalahan penentuan rute patroli sekuriti yang optimal di PT. X pada lokasi SPU. Hasil penelitian menunjukkan bahwa total jarak tempuh dengan menggunakan metode intuitif yang telah diterapkan oleh supir seatruck adalah 72,76 km. Sedangkan, total jarak tempuh yang didapatkan dari menggunakan metode nearest neighbour yaitu 67,67 km dengan persentase penghematan jarak sebesar 6,9%. Dengan metode insertion, didapatkan total jarak tempuh sebesar 61,40 km, dengan persentase penghematan jarak sebesar 15,6% dibandingkan dengan metode intuitif supir seatruck.

  6. Kandungan Senyawa Polisiklik Aromatik Hidrokarbon (PAH di Teluk Jakarta (Polycyclic Aromatic Compounds Hydrocarbons (PAH Content in Jakarta Bay

    Directory of Open Access Journals (Sweden)

    Fasmi Ahmad

    2013-07-01

    Full Text Available Perairan Teluk Jakarta menerima limbah yang berasal dari darat maupun perairan itu sendiri. Salah satu limbah tersebut adalah senyawa organik Polisiklik Aromatik Hidrokarbon (PAH yang merupakan senyawa organik bersifat toksik terhadap biota laut. Penelitian dilakukan untuk mengetahui kandungan PAH air laut dan sedimen dalam kaitannya dengan kehidupan biota laut serta mengetahui sumber senyawa tersebut. Pengukuran dilakukan bulan Maret 2011. Contoh air laut diambil dengan water sampler dan contoh sedimen dengan grab pada 15 stasiun. Kadar PAH dianalisa dengan Gas Chromatography-Flame Ionization Detector. Hasil penelitian menunjukkan kadar PAH air laut di Teluk Jakarta Bagian Barat > Bagian Tengah > Bagian Timur. Kandungan PAH di Teluk Jakarta Bagian Barat berkisar 201,57-474,68 ppb dengan total PAH 1404,68 ppb, di Bagian Tengah 104,61-337,07 ppb dengan total 825,63 ppb, dan di Bagian Timur 112,91-370,79 ppb dengan total 806,73 ppb. Data ini menunjukkan Teluk Jakarta Bagian Barat lebih banyak menerima masukan limbah yang mengandung PAH. Sedangkan Kadar PAH sedimen di Teluk Jakarta Bagian Timur > Bagian Tengah > Bagian Barat. Kadar PAH di Teluk Jakarta Bagian Barat berkisar 1,92-64,241 ppm dengan total 107,931 ppm, di Bagian Tengah 16,14-77,71 ppm dengan total 170,61 ppm, dan di Bagian Timur 8,72-115,39 ppm dengan total 252,25 ppm. Data ini menunjukkan sedimen di Teluk Jakarta Bagian Timur lebih banyak mengakumulasi limbah yang mengandung PAH. Sumber PAH dalam air laut dan sedimen ini berasal dari berbagai sumber yakni pembakaran bahan organik, pembakaran minyak bumi, dan tumpahan minyak. Kadar PAH dalam air laut di Teluk Jakarta ini telah melebihi Nilai Ambang Batas yang ditetapkan oleh KMNLH untuk biota laut, dan Nilai Ambang Batas untuk sedimen yang ditetapkan oleh Handbook for Sediment Quality Assessment. Kata kunci: Teluk Jakarta, Polisiklik Aromatik Hidrokarbon, PAH, polusi Jakarta Bay receives various kinds of waste both from land and waters

  7. Simulasi Penentuan Kebutuhan Daya Pompa Pada Sistem Transpor Bahan Pangan Cair Dengan Menggunakan Parameter Reologi Susu Kental Manis

    Directory of Open Access Journals (Sweden)

    Ratna Ratna

    2013-04-01

    Full Text Available ABSTRAK. Simulasi penentuan kebutuhan pompa energi pada sistem bahan makanan transfer cair dengan menggunakan parameter software hasil krim reologi kental manis. Software ini dapat digunakan untuk menentukan energi pompa yang dibutuhkan oleh sistem transfer krim kental manis sehingga tidak terjadinya produk lompat dan gelembung yang menghancurkan krim kental manis. Sehingga pada saat dipasarkan, produk tidak lagi menarik dan baik untuk dikonsumsi. Sebelum melakukan simulasi dengan program komputer, dibutuhkan data viskositas (kekentalan parameter reologi krim kental manis. Hal ini diperlukan untuk mengetahui pengaruh parameter reologi untuk energi pompa yang diperlukan oleh sistem transfer krim kental manis. Dari simulasi diperoleh gambaran yang baik lebih untuk merancang suatu sistem transfer krim kental manis di salah satu pabrik pengolahan. A Simulation to Determine the Requirement of Pump Power on Transport System for Liquid Food Material using Rheology Parameter of Sweetened Condensed Milk ABSTRACT. A simulation using a software to determine the requirement of pump power on transport system for liquid food material using rheology as parameter for sweetened condensed milk. The software was able to determine the pump energy required by a transfer system of sweetened condensed milk in order to prevent the occurrence of the product jump and the effervescence. The effervescence would destroy the cream of sweetened condensed milk, so at the time of marketing, the product was no longer in good condition to consume. Before conducting simulation using computer program, viscosity data of sweetened condensed milk was required to know the influence parameter of rheology on pump power required by a transport system of sweetened condensed milk. From the simulation, a more good description was obtained to design a transfer system of sweetened condensed milk at one particular factory.

  8. SUBSTITUSI TEPUNG LABU KUNING (Cucurbits moschata, Durch TERHADAP KANDUNGAN VITAMIN A DAN DAYA TERIMA PANELIS PADA SOSIS IKAN NILA (Oreochromis niloticus

    Directory of Open Access Journals (Sweden)

    Fu'ad Hasyim Asyngari

    2017-02-01

    Full Text Available Labu kuning merupakan sayuran yang kaya akan beta karoten sebagai prekursor vitamin A. Labu kuning dapat diolah menjadi tepung, yang kemudian disubstitusikan pada produk sosis ikan untuk meningkatkan nilai gizinya. Penelitian ini bertujuan untuk mendapatkan persentase substitusi tepung labu kuning yang tepat, mempelajari pengaruh substitusi tepung labu kuning terhadap kandungan vitamin A dan daya terima panelis produk sosis ikan nila. Tahapan pertama adalah pembuatan tepung labu kuning dengan pengeringan menggunakan sinar matahari selama 2-3 hari yang dilanjutkan dengan proses penepungan. Selanjutnya tepung labu kuning disubstitusikan pada sosis ikan nila dengan persentase 0%, 10%, 15% dan 20% dari total keseluruhan adonan sosis ikan. Penelitian ini menggunakan Rancangan Acak Lengkap (RAL dengan 4 perlakuan dan 3 ulangan. Hasil penelitian menunjukkan bahwa sosis ikan nila dengan persentase substitusi tepung labu kuning 20% merupakan perlakuan terbaik ditinjau dari kandungan vitamin A. Persentase substitusi tepung labu kuning dapat meningkatkan kandungan vitamin A pada sosis ikan nila. Kandungan vitamin A sosis ikan nila dengan subtitusi tepung labu kuning dengan persentase 0%, 10%, 15% dan 20% berturut-turut yaitu < 0,01 μg/g, 0,9825 μg/g, 1,5025 μg/g dan 1,5375 μg/g. Hasil uji organoleptik menunjukkan daya terima panelis terhadap sosis ikan nila dengan substitusi tepung labu kuning berkisar antara 5 (agak suka sampai dengan 6,8 (suka. Pumpkin is vegetable that rich in beta carotene as a precursor of vitamin A. Pumpkin can be processed into flour, which is then substitution on fish sausage products to improve the nutritional value. The purpose of this study was get precise percentage substitution of pumpkin flour, to know the effect of pumpkin flour substitution on the content of vitamin A and the panelist acceptance on tilapia sausage product. The first stage was manufacturing of pumpkin flour with drying using sunlight for 2-3 days

  9. 30 PENGGUNAAN KARBON AKTIF DARI SAMPAH PLASTIK UNTUK MENURUNKAN KANDUNGAN PHOSPHAT PADA LIMBAH CAI R (Studi Kasus: Limbah Cair Industri Laundry di Temb alang, Semarang

    Directory of Open Access Journals (Sweden)

    Irawan Wisnu Wardhana

    2013-03-01

    Full Text Available Meningkatnya jumlah industri laundry akan mengakibatkan meningkatnya penggunaan deterjen. Zat yang dominan terkandung dalam deterjen adalah natrium tripolyphosphat yang berfungsi sebagai builder dan surfaktan, sehingga limbahnyapun mengandung phosphat. Hampir semua industri laundry membuang limbahnya tanpa melalui pengolahan terlebih dahulu, hal tersebut akan menyebabkan eutrofikasi dimana badan air menjadi kaya akan nutrien terlarut, menurunnya kandungan oksigen terlarut dan kemampuan daya dukung badan air terhad ap biota air. Menurut hasi uji pendahuluan, limbah cair industri tersebut mengandung kadar phos phat sebesar 10,21 mg/l. Kadar tersebut melebihi baku mutu Perda Prop. Jateng No 10 tahun 2004, dimana kadar maksimum untuk phosphat total adalah 2 mg/l. Salah satu cara pengolahan limbah adalah dengan proses adsorpsi menggunakan karbon aktif dari sampah plastik jenis polyethylene. Penelitian ini bertujuan untuk mengetahui kemamapuan karbon aktif dari sampah plas tik dalam menurunkan kandungan phosphat dengan percobaan batch dan kontinyu. Percobaan batch menggunakan variasi berat karbon aktif dari sampah plastik 1,2, dan 3 gram untuk masing-masimg variasi ukuran media 30-60 mesh dan 100-200 mesh. Percobaan batch mempunyai efisiensi penurunan phosphat tertinggi pada berat 3 gram (100-200mesh sebesar 45,45%. Sedangkan percobaan kontinyu dilakukan pada kolom berdiameter 1 inchi dengan variasi debit 50 ml/menit dan 100 ml/menit. Percobaan kontinyu mempunyai efisiensi penurunan phosphat terbesar pada debit 50 ml/menit sebesar 54,75%. Nilai konstanta kecepatan (k1 0,0108 ml/mg.dtk dengan kapasitas serap (qo 0,677 mg/g.

  10. Evaluasi Shift Kerja dan Penentuan Waktu Standar PT X Berdasarkan Beban Kerja

    Directory of Open Access Journals (Sweden)

    Trisna Mesra

    2016-04-01

    Full Text Available PT. X is one of the companies located in Dumai Industrial Region, produces fertilizer. This company has three production plants. The production capacity of the first plant is 450 tons/day, the second plant produces 750 tons/day and the third plant produces 700 tons/day.  PT. X is supported by 2 sub companies, they are PT. A and PT. B. PT. A operates 5 bagging lines and PT. B operates 3 bagging lines. The fertilizer bagging process has three steps where each step has its own work station: putting the labeled sack to the hook followed by filling the sack with fertilizer, installing the tie cable, and sewing the fertilizer filled sack. From the initial survey, it was found that the processing time is not optimal to reach production target. PT. A and B have to set 24 working hours per day to run the target resulting on frequent over time, excessive fatigue and the negative impact of physically and mentally for the workers. Author’s hypothesis is the current condition has been one of the reasons for a decline of the production output. Therefore, the purposes of the research are to find the impact of current working hours and shift work pattern on the physical and psychological response of the workers and to calculate the standard time required to complete one cycle of bagging process. This standard time is very crucial to determine production target thus determine the optimal working hours and shift rotation. Measuring of heart rate are collecting results of a questionnaire of NASA-TLX are the parameters used to evaluate the physical and psychological response of workers. Two workers from different group worker, different shift work, from PT. A and PT. B were selected as samples to evaluate their heart rate pattern. The questioner spread out to all workers. Time standard was determined by observing and taking data of   40 bagging cycles for each shift work. The results show that shift work affecting the physiological response of workers in PT. B

  11. Penentuan status mutu air dengan sistem STORET di Kecamatan Bantar Gebang

    Directory of Open Access Journals (Sweden)

    Bethy Carolina Matahelumual

    2014-06-01

    Full Text Available Water is needed for human life, animals and plants. It can be used as media of transportation (rivers and sea and energy resources. In Indonesia, groundwater is used for drinking water. Besides the advantages, water could cause disadvantages such as flooding.Intensive exploitation groundwater will cause negative impact prior to degradation of water quality, and its local water surface. The water qualities depend on the environmental conditions. If ecosystem is maintained in balance, it will create natural aquatic cycle.In 2002, study of the water quality was carried out at Bantar Gebang Sub District. The result compared to the STORET System of Environmental Protection Agency (EPA shows that bad quality of water was caused by its environmental condition and the recent waste disposal site of Bantar Gebang.

  12. Tembaga (Cu Menurunkan Kandungan Pigmen dan Pertumbuhan Mikroalga Merah, Porphyridium cruentum (Effect of Copper on Pigments Content and Growth of Red Microalgae, Porphyridium cruentum

    Directory of Open Access Journals (Sweden)

    Reza Hafiz Pranajaya

    2014-06-01

    Full Text Available Logam berat tembaga (Cu merupakan salah satu pencemar yang paling mengkhawatirkan di wilayah pesisir dan lautan. Berbagai metode telah banyak dikembangkan untuk mengatasi dan mengurangi pencemaran logam berat, baik secara fisika, kimia dan biologi. Masalah teknis dan biaya yang mahal menyebabkan manusia menggunakan cara biologis (bioremediasi. Salah satu diantaranya menggunakan mikroalga Porphyridium cruentum. Penelitian bertujuan untuk mengetahui pengaruh tingkat konsentrasi logam berat Cu terhadap kandungan klorofil, pigmen fikobiliprotein dan pertumbuhan mikroalga P. cruentum. Bibit mikroalga diperoleh dari Balai Besar Pengembangan Budidaya Air Payau Situbondo. Rancangan penelitian menggunakan metode eksperimental laboratorium. Konsentrasi logam berat Cu yang digunakan adalah 0 ppm sebagai kontrol, 1, 2, 3  dan 4 ppm. Logam berat Cu dianalisa menggunakan AAS dan pigmen (klorofil dan fikobiliprotein menggunakan spektrofotometri UV-Vis.Hasil yang didapat menunjukkan bahwa logam berat Cu dengan konsentrasi yang berbeda memberikan pengaruh yang sangat nyata (P<0,01 terhadap kandungan pigmen (klorofil dan fikobiliprotein, BCF dan pengaruh nyata (P<0,05 terhadap laju pertumbuhan P. cruentum. Semakin tinggi logam berat Cu membuat laju pertumbuhan, kandungan pigmen (klorofil dan fikobiliprotein, dan BCF pada P. cruentum semakin menurun. Prosentase penyerapan logam berat Cu tertinggi sebesar  13,1 % (1 ppm, 8,2 % (2 ppm, 6,9 % (3 ppm, dan 2,6% (4 ppm. Hasil penelitian ini menunjukkan bahwa P. cruentum berpotensi sebagai bioremediator. Kata kunci: Porphyridium cruentum; pigmen; klorofil; fikobiliprotein; pertumbuhan; tembaga   Copper (Cu is one of heavy metals and the most pollutant at seawater ecosystem. Various methods have been developed to reduce heavy metal pollution with in physics, chemistry and biology method. Technical problems and high costs cause human use biological method (bioremediation. One of them used microalgae Porphyridium

  13. Penentuan Interval Waktu Perawatan Komponen Kritis pada Mesin Turbin di PT PLN (Persero Sektor Pembangkit Ombilin

    Directory of Open Access Journals (Sweden)

    Taufik Taufik

    2016-04-01

    Full Text Available Electrical energy requirements in Indonesia annually increase in line with economic growth and an increase in population. So, PT PLN (Persero have to be able to fulfill the public demands for electrical energy. One of the power generation existed is Steam PowerGeneration. The condition of power generation depended on the maintenance, so, well maintenance made power plant operated at ease condition. Production process in SteamPower Generation of Ombilin used a closed cycle or continuous process. If a machine or an equipment damaged, it will stop the whole function. In the production process, the company involved several main engines are boiler, turbine, condenser, and generator. But the damage often occurs in turbine engine which caused the generation power in Steam PowerGeneration of Ombilin can not operate. Therefore, it needs a maintenance action of machinery/equipment to be able to prevent the damage. The right strategy to keep the engine operating is determining the optimal maintenance interval of equipment for minimizing downtime.The stages of this research begin by determining the critical engine with Criticality Analysis method. Then, the determination of the critical components using Pareto diagram. Then, the determination of the probability density function (pdf and the reliability of critical components. After that, the determination of maintenance intervals of the critical components by using the criterion of minimizing the downtime that will be used to make maintenance scheduling.Based on the processing data has been done, it was found that the critical engine is a turbine engine with a total value is 44 and the critical components of a turbine engine are membrane turbine, bearing and turning gear with the examination time interval for each critical component are 960.48 hours (40 days, 908.57 hours (37 days and 1150.28 hours (48days. While the preventive replacement intervals for components of turbine membrane is after operating for

  14. PENENTUAN FAKTOR DAN TARAF FAKTOR DALAM PENGENDALIAN KUALITAS PRODUKSI BENANG PCM DI PT APAC INTI CORPORA DENGAN METODE DESAIN EKSPERIMEN

    Directory of Open Access Journals (Sweden)

    Darminto Pujotomo

    2012-02-01

    Full Text Available PT. APAC Inti Corpora merupakan salah satu perusahaan tekstil yang terbesar di Asia Tenggara dimana salah satu jenis produknya adalah benang PCM yang dihasilkan oleh departemen spinning 4. Permasalahan yang muncul adalah produk akhir yang cacat melebihi target perusahaan sebesar 0,8% dari total produksi, sedangkan perusahaan dituntut untuk menghasilkan produk cacat seminimal mungkin. Masalah ini muncul karena masih banyaknya cacat yang timbul pada benang PCM yang didominan oleh cacat crossing (24,67%,  cacat ring cone (21,98%, cacat tanpa ekor (16,02% dan kontaminasi (12,50%. Penelitian ini dimaksudkan untuk melakukan penilaian terhadap proses yang terjadi dan apabila ternyata memang terjadi proses yang tidak terkendali maka selanjutnya akan dilakukan identifikasi dan analisa faktor-faktor yang mempunyai pengaruh secara signifikan terhadap ttimbulnya cacat crossing pada benang PCM. Metode yang digunakan untuk menilai proses operasi adalah metode pengendalian proses statistik (statistical process control, sedangkan metode yang digunakan untuk menganalisa faktor-faktor yang berpengaruh terhadap timbulnya cacat benang PCM adalah metode desain eksperimen faktorial.  Dari grafik pengendali dan penentuan kemampuan proses dapat diketahui bahwa proses operasi yang terjadi berada di luar kontrol karena menghasilkan cukup banyak produk cacat. Faktor-faktor yang akan diteliti dalam penelitian ini adalah faktor ukuran benang, umur mesin dan kecepatan mesin yang masing-masing faktor terdiri dari 2 taraf faktor. Faktor ukuran benang terdiri dari tipis dan tebal. Faktor umur mesin terdiri dari mesin lama dan mesin baru.Faktor kecepatan mesin terdiri dari 900 MPM dan 1000 MPM. Berdasarkaan perhitungan analisa variansi (ANAVA dan test hipotesa, faktor yang signifikan menyebabkan timbulnya cacat crossing adalah faktor ukuran benang  dan umur mesin.   Kata kunci : cacat crossing, pengendalian kualitas, ANAVA   PT.APAC Inti Corpora is the largest textile

  15. FORMULASI, KANDUNGAN GIZI, DAN DAYA TERIMA KUE-KUE TRADISIONAL MAKASSAR BERBASIS TEPUNG PUPAE–MULBERRY (PURY SEBAGAI MAKANAN BERGIZI MASA DEPAN

    Directory of Open Access Journals (Sweden)

    Clara Meliyanti Kusharto

    2016-04-01

    Full Text Available ABSTRACTThe aims of this research was to formulate and improve the nutrient content and define of makassar traditional snack which was enriched with Pupae-mulberry (Pury powder. Experimental study was conducted and proximate analysis was used to determine nutrient content of the product and acceptance test was used by hedonic test of 25-32 semi-trained panelists. This research produced three kinds of traditional snacks, namely Rampari sponge cake, Deppatori Pury, and Pury sticks. Based on organoleptic test product Deppatori was selected to develop further by mixing basic substances consist of rice flour, glutinous rice flour, brown sugar, sesame and water with pupae-mulberry (pury powder. The formulas were F1 (pury powder 5%, F2 (pury powder 10%, and F3 (pury powder 15%. The study showed that by hedonic scale, the panel preferred F2 because the addition more than 10% of Pury powder will make texture harder. Hedonic quality scale indicated that F2 had characteristics yellowish brown color, taste and flavor close to neutral. Nutrient content of Deppatori Pury 10% (per 100 g was water 7.92 g, ash 1.19 g, protein 5.80 g, fat 25.99 g, carbohydrates 67.02 g, energy 484 kcal, calcium 74.14 mg, iron 1.96 mg, phosporus 97.23 mg, respectively and result of microbiology test was 390 cfu/g. Protein contribution of Deppatori-Pury 10% per 100 g serving size to RDA of elderly was 9.4-10.4%. Therefore, two serving size is recommended for Deppatori-Pury as future food to reach 20% RDA protein.Keywords: acceptability, deppatori, makassar’s snack, pury powderABSTRAKTujuan penelitian adalah melakukan formulasi dan meningkatkan kandungan zat gizi serta daya terima kue-kue tradisional Makassar yang diperkaya tepung pupae-mulberry (Pury. Penelitian ini merupakan studi eksperimental yang melakukan analisis kandungan zat gizi secara proksimat dan uji penerimaan panelis (organoleptik menggunakan uji hedonik oleh 25-32 orang panelis semi terlatih. Pembuatan kue

  16. Penentuan Lokasi DG dan Kapasitor Bank dengan Rekonfigurasi Jaringan Untuk Memperoleh Rugi Daya Minimal Pada Sistem Distribusi Radial Menggunakan Algoritma Genetika

    Directory of Open Access Journals (Sweden)

    Ridho Fuaddi

    2016-04-01

    Full Text Available Jaringan distribusi yang paling umum digunakan ialah sistem dengan bentuk radial. Sistem ini memiliki bentuk yang sederhana serta biaya investasinya yang terbilang murah. Namun, kualitas pelayanan dayanya relatif buruk yang terjadi akibat adanya rugi daya pada saluran yang cukup besar. Hal itu terjadi karena jaringan distribusi yang merupakan ujung dari saluran transmisi memiliki perbandingan rasio R/X yang tinggi sehingga mengakibatkan rugi daya yang besar. Terdapat beberapa cara untuk mengurangi rugi daya pada jaringan distribusi yakni dengan menggunakan rekonfigurasi jaringan, pemasangan kapasitor bank dan pemasangan unit distributed generation (DG pada sistem distribusi. Pada tugas akhir ini, algoritma genetika merupakan metode yang digunakan untuk memecahkan suatu pencarian nilai dalam masalah optimasi penentuan lokasi DG dan kapasitor bank serta rekonfigurasi jaringan yang tepat untuk mendapatkan rugi daya yang paling minimal. Dari hasil pengujian yang telah dilakukan pada penelitian ini, diperoleh perbaikan rugi daya nyata paling optimal sebesar 94,92 % terhadap kondisi awal sistem distribusi radial 33-bus standart IEEE melalui penggabungan pemasangan DG dan kapasitor bank serta rekonfigurasi jaringan.

  17. Deteksi Kandungan Daging Babi pada Bakso yang Dijajakan di Pusat Kota Salatiga Menggunakan Teknik Polymerase Chain Reaction

    Directory of Open Access Journals (Sweden)

    Fidia Fibriana

    2011-03-01

    Full Text Available The purpose of this research is to determine whether the meatball products that sold atSalatiga are contain pork. Stratifi ed random sampling technique used to take samplesof meatballs which sold by 13 meatball stalls from 25 meatball stalls scattered in thecentral city of Salatiga. Isolation and purifi cation of DNA from meatballs, beef, andpork samples use Sambrook et al. modifi ed by Sulandari and Zein method. The yield ofDNA followed by PCR process using P14 primers that representing the PRE-1 loci in thepig genome. DNA amplifi cation used protocol initial denaturation at temperature of 93°C for 2 minutes, followed by 45 cycles of denaturation 93 °C for 1 minute, annealing62 °C for 30 seconds, extension 72 °C for 1 minute, and ending extension 72 °C for 2minutes. Appearance of 481 base-pair PCR product was expected. Result from 1,2%agarose gel electrophoresis of PCR products showed 481 base-pair, a specifi c DNAband size in pork meat and meatball samples number thirteen. It can be concluded thatmeatball product from meatball stall number thirteen was contain pork.Keywords: detection of pork, meatball products, PCR technique

  18. Sulfur cycle

    Digital Repository Service at National Institute of Oceanography (India)

    LokaBharathi, P.A.

    Microbes, especially bacteria, play an important role in oxidative and reductive cycle of sulfur. The oxidative part of the cycle is mediated by photosynthetic bacteria in the presence of light energy and chemosynthetic forms in the absence of light...

  19. PENDUGAAN UMUR SIMPAN JAGUNG MANIS BERDASARKAN KANDUNGAN TOTAL PADATAN TERLARUT DENGAN MODEL ARRHENIUS (Shelf Life Estimation of Sweet Corn Based on Its Total Soluble Solid by Using Arrhenius Model

    Directory of Open Access Journals (Sweden)

    Rita Khatir

    2015-09-01

    Full Text Available Sweet corn has short shelf life at room temperature storage in the tropical countries (28-33°C. The quality deterioration of sweet corn can be determined by the decrease of its sugar content. The study aimed to estimate the shelf life of sweet corn based on the reduction of its total soluble solid (TSS by using Arrhenius model. The samples were prepared from fresh harvested corn stored for 10 days at 3 different temperatures of 5, 15 and 28 °C. Total soluble solid (TSS were analyzed every day by using abbe refractrometer. Organoleptic analysis was used by using hedonic scales from 1 to 7. The analysis was conducted until respondents had graded the samples at score 5 (dislike slightly, 6 (dislike and approaches can be used to calculate the shelf life of sweet corn. The acceleration factor for the TSS degradation at null approach, it was estimated that if the sweet corn were stored at temperature of 30, 25, 20, 15, 10 and 5°C, the shelf temperatures, the shelf life of sweet corn would be 3.7, 4.5, 5.6, 6.8, 8.4, and 10.3 days. In conclusion, the shelf life predictions of sweet corn were valid well with the experimental results. Keywords: Sweet corn, shelf life, total soluble solid   ABSTRAK Umur simpan jagung manis relatif singkat apalagi kalau disimpan pada suhu ruang di negara-negara tropis (28-32°C. Kerusakan jagung manis dapat diindikasikan dengan penurunan kandungan gulanya. Penelitian ini bertujuan untuk menduga umur simpan jagung manis berdasarkan reaksi penurunan kandungan total padatan terlarutnya (TPT dengan pendekatan model Arrhenius. Jagung manis segar yang baru siap panen segera disimpan selama 10 hari pada 3 kombinasi suhu yaitu 5, 15 dan 28°C. Setiap hari dilakukan analisis kandungan TPT dengan . Uji organoleptik dilakukan dengan skala hedonik 1-7. Proses pengamatan dihentikan apabila responden telah memberikan nilai 5 (agak tidak suka, 6 (tidak suka dan 7 (sangat tidak suka. Pendekatan model Arrhenius dilakukan dengan dua

  20. Glacial cycles

    DEFF Research Database (Denmark)

    Kaufmann, R. K.; Juselius, Katarina

    We use a statistical model, the cointegrated vector autoregressive model, to assess the degree to which variations in Earth's orbit and endogenous climate dynamics can be used to simulate glacial cycles during the late Quaternary (390 kyr-present). To do so, we estimate models of varying complexity...... and compare the accuracy of their in-sample simulations. Results indicate that strong statistical associations between endogenous climate variables are not enough for statistical models to reproduce glacial cycles. Rather, changes in solar insolation associated with changes in Earth's orbit are needed...... to simulate glacial cycles accurately. Also, results suggest that non-linear 10 dynamics, threshold effects, and/or free oscillations may not play an overriding role in glacial cycles....

  1. Fuel cycles

    International Nuclear Information System (INIS)

    Hawley, N.J.

    1983-05-01

    AECL publications, from the open literature, on fuels and fuel cycles used in CANDU reactors are listed in this bibliography. The accompanying index is by subject. The bibliography will be brought up to date periodically

  2. Standar Penentuan Informasi Iklan Menyesatkan

    OpenAIRE

    Harianto, Dedi

    2010-01-01

    Advertisement is used to relate a business practitioner and the consumers. To the businessman, advertisement is a facility to introduce his product(s), while to the consumers, advertisement is a source of information to choose and/or to buy the product(s) that meets their needs. But in practice, most businessman still treat advertisement only as their media of promotion to increase the selling of their products by ignoring the rights of consumers to know the truth and accurate information fou...

  3. FAKTOR KEBUDAYAAN DALAM PENENTUAN POSITIONING

    Directory of Open Access Journals (Sweden)

    Lesie Yuliadewi

    1999-01-01

    Full Text Available The culture is the important part to influent people s attitudes like the way they have seen or thinked. Usually%2C people will learn some thing faster than the other%2C because it has been related with their past experience. That is why%2C the culture become one of the most important thing in advertising and it have great influence for the brand image of the consumers. So the consumers can be easily remember the products that have been advertising. Last%2C all of it%2C will change the sales of the products goes up and hopefully%2C it will increase the revenue/profit of the firm. Abstract in Bahasa Indonesia : Kebudayaan akan mempengaruhi sudut pandang seseorang terhadap sesuatu yang dilihat atau diterima oleh otaknya. Seseorang akan lebih cepat menerima sesuatu apabila ciri-ciri hal yang baru diterimanya berhubungan dengan masa lampaunya. Oleh karena itu%2C kebudayaan merupakan faktor yang penting diperhitungkan agar pesan yang termuat dalam iklan cepat diterima dan diingat di benak calon konsumen%2C sehingga angka penjualan dapat meningkat.

  4. Kandungan L-3, 4-dihydroxyphenylalanine Suatu Bahan Neuroprotektif pada Biji Koro Benguk (Mucuna pruriens Segar, Rebus, dan Tempe (L-3,4-DIHYDROXYPHENYLALANINE CONTENT AS A NEUROPROTECTIVE MATERIAL ON FRESH, COOKED AND FERMENTED OF KORO BENGUK (MUCUNA PR

    Directory of Open Access Journals (Sweden)

    Tri Wahyu Pangestiningsih

    2017-04-01

    kandungan L-DOPA mulai dari biji koro benguk segar, rebus, dan bahan olahannya yaitu tempe benguk. Uji dilakukan pada biji koro benguk mentah kulit berwarna putih (BR D dan hitam (BR A asal Wonogiri, Jawa Tengah, serta biji koro benguk mentah kulit berwarna putih (KP C, biji koro benguk yang sudah direbus dua kali, dan tempe benguk asal Kulon Progo, Yogyakarta. Sampel diekstraksi menggunakan pelarut etanol dan n-propanol, kemudian dianalisis dengan teknik high-performance liquid chromatography (HPLC untuk melihat kadar kandungan L-DOPA-nya. Hasil penelitian menunjukkan, kadar L-DOPA tertinggi (8,56% ditemukan pada biji koro benguk mentah dengan warna kulit putih asal Wonogiri yang diekstraksi menggunakan pelarut etanol, sedangkan kadar L-DOPA terendah (0,016% ditemukan pada sediaan tempe yang diekstraksi dengan n-propanol asal Kulon Progo. Secara umum, ekstraksi menggunakan pelarut etanol memberikan hasil kadar L-DOPA yang lebih tinggi dibandingkan dengan pelarut n-propanol. Semua ekstraksi sampel, mulai biji koro benguk segar, rebus sampai bentuk tempenya mengandung L-DOPA, dengan kadar tertinggi terdapat pada biji koro benguk segar berkulit putih asal Wonogiri, Jawa Tengah yang diekstraksi menggunakan etanol, sedangkan kadar terendah dijumpai pada tempe benguk dari Kulon Progo, Yogyakarta yang diekstraksi menggunakan n-propanol.

  5. Coordination cycles

    Czech Academy of Sciences Publication Activity Database

    Steiner, Jakub

    -, č. 274 (2005), s. 1-26 ISSN 1211-3298 Institutional research plan: CEZ:AV0Z70850503 Keywords : coordination * crises * cycles and fluctuations Subject RIV: AH - Economics http://www.cerge-ei.cz/pdf/wp/Wp274.pdf

  6. Happy Cycling

    DEFF Research Database (Denmark)

    Geert Jensen, Birgitte; Nielsen, Tom

    2013-01-01

    og Interaktions Design, Aarhus Universitet under opgave teamet: ”Happy Cycling City – Aarhus”. Udfordringen i studieopgaven var at vise nye attraktive løsningsmuligheder i forhold til cyklens og cyklismens integration i byrum samt at påpege relationen mellem design og overordnede diskussioner af...

  7. Coordination cycles

    Czech Academy of Sciences Publication Activity Database

    Steiner, Jakub

    2008-01-01

    Roč. 63, č. 1 (2008), s. 308-327 ISSN 0899-8256 Institutional research plan: CEZ:AV0Z70850503 Keywords : global games * coordination * crises * cycles and fluctuations Subject RIV: AH - Economics Impact factor: 1.333, year: 2008

  8. Fuel cycle

    International Nuclear Information System (INIS)

    Bahm, W.

    1989-01-01

    The situation of the nuclear fuel cycle for LWR type reactors in France and in the Federal Republic of Germany was presented in 14 lectures with the aim to compare the state-of-the-art in both countries. In addition to the momentarily changing fuilds of fuel element development and fueling strategies, the situation of reprocessing, made interesting by some recent developmnts, was portrayed and differences in ultimate waste disposal elucidated. (orig.) [de

  9. Safe cycling!

    CERN Multimedia

    Anaïs Schaeffer

    2012-01-01

    The HSE Unit will be running a cycling safety campaign at the entrances to CERN's restaurants on 14, 15 and 16 May. Pop along to see if they can persuade you to get back in the saddle!   With summer on its way, you might feel like getting your bike out of winter storage. Well, the HSE Unit has come up with some original ideas to remind you of some of the most basic safety rules. This year, the prevention campaign will be focussing on three themes: "Cyclists and their equipment", "The bicycle on the road", and "Other road users". This is an opportunity to think about the condition of your bike as well as how you ride it. From 14 to 16 May, representatives of the Swiss Office of Accident Prevention and the Touring Club Suisse will join members of the HSE Unit at the entrances to CERN's restaurants to give you advice on safe cycling (see box). They will also be organising three activity stands where you can test your knowle...

  10. Cycle 22

    International Nuclear Information System (INIS)

    Kappernman, J.G.; Albertson, V.D.

    1991-01-01

    This paper reports that for many electric utility systems, Solar Cycle 22 has been the first introduction to the phenomena of Geomagnetic Disturbances and the disrupting and damaging effects that they can have upon modern power systems. For all intents and purposes, Power Industry awareness of Cycle 22 started with a bang during the Great Geomagnetic Storm of March 13, 1989. This storm caused a blackout to the entire Province of Quebec, permanently damaged a large nuclear plant GSU transformer in New Jersey, and created enough havoc across the entire North American power grid to create the plausible threat of a massive power system blackout. The flurry of activity and investigation that followed has led many engineers to realize that their power systems are indeed vulnerable to this phenomena and if anything are becoming ever more vulnerable as the system grows to meet future requirements. As a result some organizations such as Hydro Quebec, PSE and G, and the PJM Pool now implement strategic measures as a remedial response to detection of geomagnetic storm conditions. Many more companies pay particularly close attention to storm forecasts and alerts, and the industry in general has accelerated research and monitoring activities through their own means of in concert with the Electric Power Research Institute (EPRI)

  11. Carbon cycle

    Energy Technology Data Exchange (ETDEWEB)

    Jaeger, J; Halbritter, G; Neumann-Hauf, G

    1982-05-01

    This report contains a review of literature on the subjects of the carbon cycle, the increase of the atmospheric CO/sub 2/ concentration and the possible impacts of an increased CO/sub 2/ concentration on the climate. In addition to this survey, the report discusses the questions that are still open and the resulting research needs. During the last twenty years a continual increase of the atmospheric carbon dioxide concentration by about 1-2 ppm per years has been observed. In 1958 the concentration was 315 ppm and this increased to 336 ppm in 1978. A rough estimate shows that the increase of the atmospheric carbon dioxide concentration is about half of the amount of carbon dioxide added to the atmosphere by the combustion of fossil fuels. Two possible sinks for the CO/sub 2/ released into the atmosphere are known: the ocean and the biota. The role of the biota is, however, unclear, since it can act both as a sink and as a source. Most models of the carbon cycle are one-dimensional and cannot be used for accurate predictions. Calculations with climate models have shown that an increased atmospheric CO/sub 2/ concentration leads to a warming of the earth's surface and lower atmosphere. Calculations show that a doubling of the atmospheric CO/sub 2/-concentration would lead to a net heating of the lower atmosphere and earth's surface by a global average of about 4 W m/sup -2/. Greater uncertainties arise in estimating the change in surface temperature resulting from this change in heating rate. It is estimated that the global average annual surface temperature would change between 1.5 and 4.5 K. There are, however, latitudinal and seasonal variations of the impact of increased CO/sub 2/ concentration. Other meteorological variables (e.g. precipitation, wind speed etc.) would also be changed. It appears that the impacts of the other products of fossil fuel combustion are unlikely to counteract the impacts of CO/sub 2/ on the climate.

  12. Your Menstrual Cycle

    Science.gov (United States)

    ... your menstrual cycle What happens during your menstrual cycle The menstrual cycle includes not just your period, but the rise ... that take place over the weeks in your cycle. Want to know what happens on each day ...

  13. Analisis kandungan kuman enterik pada air kemih

    Directory of Open Access Journals (Sweden)

    Agus Supriyanto Supriyanto

    1995-03-01

    Full Text Available This research was conducted in order to know the total late count (TPC and what kind of enteric bacteria were isolated from urine speciments. Samples were taken from clinical laboratoru, and was examinated in the section of microbiology department of Biology, FMIPAUniversitas Airlangga Surabaya. Thirty five samples were examinated. Method of detection of enteric bacteria, carried out in several steps including enrichment, isolation and identification. Identification step, was done using test of fisiology, motility and morphology with the Gram staining. The result showed, that the number of bacteria in urine specimens was 10 x 103 CFU per ml to 296 x 107 CFU per ml and consist of eterobacter sp., Pseudomonas sp., Klebsiella sp., Serratia sp., Poteus morgana, Proteus mirabilis, Aeromonassp. and Escherichia coli.

  14. Bipolar mood cycles and lunar tidal cycles.

    Science.gov (United States)

    Wehr, T A

    2018-04-01

    In 17 patients with rapid cycling bipolar disorder, time-series analyses detected synchronies between mood cycles and three lunar cycles that modulate the amplitude of the moon's semi-diurnal gravimetric tides: the 14.8-day spring-neap cycle, the 13.7-day declination cycle and the 206-day cycle of perigee-syzygies ('supermoons'). The analyses also revealed shifts among 1:2, 1:3, 2:3 and other modes of coupling of mood cycles to the two bi-weekly lunar cycles. These shifts appear to be responses to the conflicting demands of the mood cycles' being entrained simultaneously to two different bi-weekly lunar cycles with slightly different periods. Measurements of circadian rhythms in body temperature suggest a biological mechanism through which transits of one of the moon's semi-diurnal gravimetric tides might have driven the patients' bipolar cycles, by periodically entraining the circadian pacemaker to its 24.84-h rhythm and altering the pacemaker's phase-relationship to sleep in a manner that is known to cause switches from depression to mania.

  15. Essays on economic cycles

    NARCIS (Netherlands)

    Groot, de E.A. (Bert)

    2006-01-01

    Schumpeter’s line of thought of multiple economic cycles is further investigated. The existence of multiple cycles in economic variables is demonstrated. In basic innovations five different cycles are found. Multiple cycle structures are shown in various macro-economic variables from the United

  16. Nuclear power fuel cycle

    International Nuclear Information System (INIS)

    Havelka, S.; Jakesova, L.

    1982-01-01

    Economic problems are discussed of the fuel cycle (cost of the individual parts of the fuel cycle and the share of the fuel cycle in the price of 1 kWh), the technological problems of the fuel cycle (uranium ore mining and processing, uranium isotope enrichment, the manufacture of fuel elements, the building of long-term storage sites for spent fuel, spent fuel reprocessing, liquid and gaseous waste processing), and the ecologic aspects of the fuel cycle. (H.S.)

  17. KANDUNGAN VITAMIN B6, B9, B12 DAN E BEBERAPA JENIS DAGING, TELUR, IKAN DAN UDANG LAUT DI BOGOR DAN SEKITARNYA (VITAMIN B6, B9, B12 AND E CONTENT OF SEVERAL TYPES OF MEATS, EGGS, FISHES AND MARINE SHRIMPS IN BOGOR AND SURROUNDING AREAS

    Directory of Open Access Journals (Sweden)

    Heru Yuniati

    2012-06-01

    Full Text Available ABSTRACT Food Composition Table (DKBM in Indonesia has not mentioned all types of nutrients available in the food, particularly vitamin B6, B9 (folic acid, B12, and vitamin E. Therefore this study aimed to analyze the content of vitamin B6, B9 (folic acid, B12, and vitamin E in several types of meat, eggs, fish and marine shrimps consumed in Bogor and surrounding areas. Vitamin B6, B9, B12, and vitamin E from three kinds of meat (chicken, beef, lamb, two types of eggs (chicken, duck, and four species of fish (snapper, bloating, carp and tuna and crayfish are analyzed using High-Performance Liquid Chromatography (HPLC. The samples used are raw and taken from three locations in Bogor and surrounding areas. Fishes, meats and eggs contain high levels of folic acid, however the amount of folic acid content in meat varies depending on which part of meat the samples are taken, types of organ, and the fat content of the meat. The folic acid content in chicken wings is different with those in thigh. In fatty mutton the folic acid is higher than in those lean meat, and in yolk is higher than those in egg white. Vitamin E content of snapper is the highest amongs other types of fishes (6.54 µg/100 g.Chicken eggs contain a higher amount of vitamin E than duck eggs, while the yolk contains ahigher amount of vitamin E than those egg white. Keywords: animal foods, vitamin B6, vitamin B9 (folic Acid, vitamin B12, vitamin E   ABSTRAK Daftar Komposisi Bahan Makanan (DKBM yang ada di Indonesia belum memuat semua jenis zat gizi dalam makanan, khususnya vitamin B6, B9 (asam folat, B12 dan vitamin E. Menganalisis kandungan vitamin B6, B9 (asam folat, B12, dan vitamin E dalam beberapa jenis daging, telur, ikan dan udang laut yang dikonsumsi masyarakat di Bogor dan sekitarnya. Kandungan vitamin B6, B9, B12 dan vitamin E dari tiga jenis daging (ayam, sapi, kambing, dua jenis telur (ayam, itik, serta empat jenis ikan (kakap, kembung, mas, tongkol dan udang laut

  18. Proliferation in cycle

    Energy Technology Data Exchange (ETDEWEB)

    Piao Yunsong [College of Physical Sciences, Graduate School of Chinese Academy of Sciences, Beijing 100049 (China)], E-mail: yspiao@gucas.ac.cn

    2009-06-15

    In the contracting phase with w{approx_equal}0, the scale invariant spectrum of curvature perturbation is given by the increasing mode of metric perturbation. In this Letter, it is found that if the contracting phase with w{approx_equal}0 is included in each cycle of a cycle universe, since the metric perturbation is amplified on super horizon scale cycle by cycle, after each cycle the universe will be inevitably separated into many parts independent of one another, each of which corresponds to a new universe and evolves up to next cycle, and then is separated again. In this sense, a cyclic multiverse scenario is actually presented, in which the universe proliferates cycle by cycle. We estimate the number of new universes proliferated in each cycle, and discuss the implications of this result.

  19. Proliferation in cycle

    International Nuclear Information System (INIS)

    Piao Yunsong

    2009-01-01

    In the contracting phase with w≅0, the scale invariant spectrum of curvature perturbation is given by the increasing mode of metric perturbation. In this Letter, it is found that if the contracting phase with w≅0 is included in each cycle of a cycle universe, since the metric perturbation is amplified on super horizon scale cycle by cycle, after each cycle the universe will be inevitably separated into many parts independent of one another, each of which corresponds to a new universe and evolves up to next cycle, and then is separated again. In this sense, a cyclic multiverse scenario is actually presented, in which the universe proliferates cycle by cycle. We estimate the number of new universes proliferated in each cycle, and discuss the implications of this result.

  20. Cycling in Sydney, Australia

    Directory of Open Access Journals (Sweden)

    Alexis Zander

    2013-01-01

    Full Text Available Introduction. Cycling can be an enjoyable way to meet physical activity recommendations and is suitable for older people; however cycling participation by older Australians is low. This qualitative study explored motivators, enablers, and barriers to cycling among older people through an age-targeted cycling promotion program. Methods. Seventeen adults who aged 50–75 years participated in a 12-week cycling promotion program which included a cycling skills course, mentor, and resource pack. Semistructured interviews at the beginning and end of the program explored motivators, enablers, and barriers to cycling. Results. Fitness and recreation were the primary motivators for cycling. The biggest barrier was fear of cars and traffic, and the cycling skills course was the most important enabler for improving participants’ confidence. Reported outcomes from cycling included improved quality of life (better mental health, social benefit, and empowerment and improved physical health. Conclusions. A simple cycling program increased cycling participation among older people. This work confirms the importance of improving confidence in this age group through a skills course, mentors, and maps and highlights additional strategies for promoting cycling, such as ongoing improvement to infrastructure and advertising.

  1. Life cycle assessment (LCA)

    DEFF Research Database (Denmark)

    Thrane, Mikkel; Schmidt, Jannick Andresen

    2004-01-01

    The chapter introduces Life Cycle Assessment (LCA) and its application according to the ISO 1404043 standards.......The chapter introduces Life Cycle Assessment (LCA) and its application according to the ISO 1404043 standards....

  2. Thorium fuel cycle management

    International Nuclear Information System (INIS)

    Zajac, R.; Darilek, P.; Breza, J.; Necas, V.

    2010-01-01

    In this presentation author deals with the thorium fuel cycle management. Description of the thorium fuels and thorium fuel cycle benefits and challenges as well as thorium fuel calculations performed by the computer code HELIOS are presented.

  3. Chords in longest cycles

    DEFF Research Database (Denmark)

    Thomassen, Carsten

    2017-01-01

    If a graph G is 3-connected and has minimum degree at least 4, then some longest cycle in G has a chord. If G is 2-connected and cubic, then every longest cycle in G has a chord.......If a graph G is 3-connected and has minimum degree at least 4, then some longest cycle in G has a chord. If G is 2-connected and cubic, then every longest cycle in G has a chord....

  4. Denatured fuel cycles

    International Nuclear Information System (INIS)

    Till, C.E.

    1979-01-01

    This paper traces the history of the denatured fuel concept and discusses the characteristics of fuel cycles based on the concept. The proliferation resistance of denatured fuel cycles, the reactor types they involve, and the limitations they place on energy generation potential are discussed. The paper concludes with some remarks on the outlook for such cycles

  5. Life Cycle Management

    DEFF Research Database (Denmark)

    Bey, Niki

    2018-01-01

    This chapter gives an overview of Life Cycle Management (LCM)—a discipline that deals with the managerial tasks related to practicing sustainable development in an organisation . Just as Life Cycle Assessment, LCM advocates the life cycle perspective , and it applies this perspective in decision...

  6. Termination of cycle rewriting

    NARCIS (Netherlands)

    Zantema, H.; König, B.; Bruggink, H.J.S.; Dowek, G.

    2014-01-01

    String rewriting can not only be applied on strings, but also on cycles and even on general graphs. In this paper we investigate termination of string rewriting applied on cycles, shortly denoted as cycle rewriting, which is a strictly stronger requirement than termination on strings. Most

  7. Marine nitrogen cycle

    Digital Repository Service at National Institute of Oceanography (India)

    Naqvi, S.W.A.

    ) such as the Marine nitrogen cycle The marine nitrogen cycle. ‘X’ and ‘Y’ are intra-cellular intermediates that do not accumulate in water column. (Source: Codispoti et al., 2001) Page 1 of 3Marine nitrogen cycle - Encyclopedia of Earth 11/20/2006http://www... and nitrous oxide budgets: Moving targets as we enter the anthropocene?, Sci. Mar., 65, 85-105, 2001. Page 2 of 3Marine nitrogen cycle - Encyclopedia of Earth 11/20/2006http://www.eoearth.org/article/Marine_nitrogen_cycle square6 Gruber, N.: The dynamics...

  8. PEMANFATAN TEOREMA BAYES DALAM PENENTUAN PENYAKIT THT

    Directory of Open Access Journals (Sweden)

    Sri Winiarti

    2008-07-01

    Full Text Available Dalam konsep pelacakan dalam mencari solusi dengan pendekatan artificial inteligent, ada berbagai metode yang dapat diterapkan untuk mengatasi masalah ketidakpastian saat proses pelacakan terjadi. Salah satunya adalah teorema bayes. Adanya ketidakpastian pada proses pelacakan dapat terjadi karena adanya perubahan pengetahuan yang ada di dalam sistem. Untuk itu diperlukan adanya suatu metode untuk mengatasi permasalahan tersebut. Dalam penelitian ini telah diterapkan suatu metode untuk mengatasi ketidakpastian dengan teorema Bayes pada kasus pelacakan untuk mendiagnosa penyakit pada THT (Telinga,Hidung dan Tenggorokan. Subjek pada penelitian ini adalah proses pelacakan untuk menentukan penyakit THT dengan model penalaran forward chaining dan metode kepastiannya menggunakan teorema bayes dengan cara menghitung nilai probabilitas suatu penyakit dan membandingkan probabilitas setiap gejalanya. Model pengembangan perangkat lunak yang digunakan dalam penelitian ini adalah Waterfall. Metode Waterfall diawali dengan analisis data, perancangan sistem, pengkodean menggunakan Visual Basic 6.0, pengujian sistem dengan black box test dan alfa test. Dari penelitian yang dilakukan menghasilkan sebuah perangkat lunak yaitu yang mampu menentukan penyakit pada THT dengan menerapkan metode bayes untuk mengatasi ketidakpastian. Hasil uji coba sistem menujukkan bahwa aplikasi ini layak dan dapat digunakan. Kata kunci : Penyakit, THT, Teorema Bayes.

  9. PEMANFATAN TEOREMA BAYES DALAM PENENTUAN PENYAKIT THT

    Directory of Open Access Journals (Sweden)

    Sri Winiarti

    2012-05-01

    Full Text Available Dalam konsep pelacakan dalam mencari solusi dengan pendekatan artificial inteligent, ada berbagai metode  yang dapat diterapkan untuk mengatasi masalah ketidakpastian saat proses pelacakan terjadi. Salah satunya adalah teorema bayes. Adanya ketidakpastian pada proses pelacakan dapat terjadi karena adanya perubahan pengetahuan yang ada di dalam sistem. Untuk itu diperlukan adanya suatu metode untuk mengatasi permasalahan tersebut. Dalam penelitian ini telah diterapkan suatu metode untuk mengatasi ketidakpastian dengan teorema Bayes pada kasus pelacakan untuk mendiagnosa penyakit pada THT (Telinga,Hidung dan Tenggorokan.  Subjek pada penelitian ini adalah proses pelacakan untuk menentukan penyakit THT dengan model penalaran forward chaining dan metode kepastiannya menggunakan teorema bayes dengan cara menghitung nilai probabilitas suatu penyakit dan membandingkan probabilitas setiap gejalanya. Model pengembangan perangkat lunak yang digunakan dalam penelitian ini adalah Waterfall. Metode Waterfall diawali dengan analisis data, perancangan sistem, pengkodean menggunakan Visual Basic 6.0, pengujian sistem dengan black box test dan alfa test. Dari penelitian yang dilakukan menghasilkan sebuah perangkat lunak yaitu  yang mampu menentukan penyakit pada THT dengan menerapkan metode bayes untuk mengatasi ketidakpastian. Hasil uji coba sistem menujukkan bahwa aplikasi ini layak dan dapat digunakan.

  10. PENENTUAN UMUR SIMPAN TERASI INSTAN DALAM KEMASAN

    Directory of Open Access Journals (Sweden)

    Mohammad Firdaus Nur Cahyo

    2016-12-01

    Full Text Available Types of processed seafood is very popular in Indonesia is a shrimp paste. In general, the paste made of rebon, small fish, or anchovies and other additives. The weakness of the paste is a relatively short shelf life due to water levels are still high, so often grow mold during the storage process. The shelf life is not too long will become a problem for consumers. Therefore it is necessary for action to extend the shelf, one with the drying process so that it becomes an instant paste. Terasi instant in order to attract packed with a suitable container. The use of packaging can affect the quality and shelf life. Determining the shelf life of the product paste can be made by methods Accelerated Shelf Life Testing (ASLT. In principle, this method is storing food products at extreme temperatures. Determining the shelf life of shrimp paste powder using a combination treatment temperature (30oC and 40oC and packaging (aluminum foil and plastic HDPE. The results of research determining the shelf life of shrimp paste powder method Accelerated Shelf Life Testing (ASLT obtained the best treatment at storage temperature of 40oC with aluminum foil packaging is 1 year 6 months 28 days, whereas at 30 ° C with aluminum foil packaging is 1 year 1 month 13 days , Storage at 40 ° C by using HDPE packaging that is 3 months and 22 days, and storage at 30 ° C is 2 months and 20 days.

  11. PENENTUAN KADAR NIKOTIN DALAM ASAP ROKOK

    Directory of Open Access Journals (Sweden)

    Dewi Susanna

    2016-09-01

    Full Text Available The purpose of this descriptive study is to assess smoke nicotine level of six cigarette brands soldin the markets. The samples consist of three brands of filtered cigarette and three brands of `kretek'  unfilteredcigarette. The nicotine content was measured from both main-stream smoke and side-stream smoke by usingHigh Performance Liquid Chromatography. Each of brand measured three times. The average of nicotine content in each cigarette was shown in the table including comparison between the main-stream smoke andthe side-stream smoke. It was found that the nicotine content of`kretek' cigarettes is higher than filteredcigarette. The highest nicotine content of the filtered cigarettes was in Filter "C" brand, meanwhile the lowestwas Filter "A" brand. The highest nicotine content of the`kretek'  cigarettes was in Filter "X" brand with thelowest nicotine content was in Filter "Z" brand. The nicotine cigarette content of main-stream smoke was 4 —6 fold than side-stream smoke. From this study, it can be recommended that nicotine content should be puton every cigarette pack label, and there should be a follow up study on other brand of cigarettes and also the effects of cigarettes on active and passive smokers.

  12. PENENTUAN CADANGAN PREMI UNTUK ASURANSI PENDIDIKAN

    Directory of Open Access Journals (Sweden)

    MADE PUTRI ARIASIH

    2015-01-01

    Full Text Available This aims of this research is determine the insurance premium reserve for education with retrospective calculations and determine the premium reserves who acquired during the period of guarantee for insurance education. This research  observes the premium reserve for persons aged 40 years with a coverage period of 17 years. The secondary data used is an education insurance data product  from the insurance company that issued the insurance product. Premium reserve is determined by using the retrospective calculation, the calculation using the annuity value, net single premium value, net annual premiums, the value of net monthly premium, CSO 1980 mortality and fixed interest rate at 9%. Retrospective calculations produce a faster value backup  and sequentially in each year. The results showed that the premium reserve with retrospective calculation should be close up to the cash price owned by insurance company and must be the same at the end of the insurance period is Rp 7.000.000,00.

  13. PENENTUAN CADANGAN PREMI UNTUK ASURANSI PENDIDIKAN

    Directory of Open Access Journals (Sweden)

    MADE PUTRI ARIASIH

    2015-03-01

    Full Text Available This aims of this research is determine the insurance premium reserve for education with retrospective calculations and determine the premium reserves who acquired during the period of guarantee for insurance education. This research  observes the premium reserve for persons aged 40 years with a coverage period of 17 years. The secondary data used is an education insurance data product  from the insurance company that issued the insurance product. Premium reserve is determined by using the retrospective calculation, the calculation using the annuity value, net single premium value, net annual premiums, the value of net monthly premium, CSO 1980 mortality and fixed interest rate at 9%. Retrospective calculations produce a faster value backup  and sequentially in each year. The results showed that the premium reserve with retrospective calculation should be close up to the cash price owned by insurance company and must be the same at the end of the insurance period is Rp 7.000.000,00.

  14. PENENTUAN CADANGAN PREMI UNTUK ASURANSI PENDIDIKAN

    OpenAIRE

    MADE PUTRI ARIASIH; KETUT JAYANEGARA; I NYOMAN WIDANA; I PUTU EKA N. KENCANA

    2015-01-01

    This aims of this research is determine the insurance premium reserve for education with retrospective calculations and determine the premium reserves who acquired during the period of guarantee for insurance education. This research  observes the premium reserve for persons aged 40 years with a coverage period of 17 years. The secondary data used is an education insurance data product  from the insurance company that issued the insurance product. Premium reserve is determined by using the re...

  15. PENGENDALIAN PERSEDIAAN MELALUI PENENTUAN PRODUK STRATEGI

    Directory of Open Access Journals (Sweden)

    Nurul Dzikrillah

    2017-01-01

      Quality improvement and costs control are vital to organizations for work performance enhancement and fulfilling customers’ requirement. Inventories that are stored in large amount of quantities will result in waste. It is a significant job for the inventory control personnel to select an appropriate policy and maintain an optimum level of inventory. The selection of inventory policy is very much important in the current scenario of intensive global competition and dynamic nature. The aim of this study is to reduce inventory value by determining strategy of each product. Inventory model classification was done based on production planning and total pending order. The result is inventory value reduce by the end of the year in 11.3 million USD which is achieve the target. The target was locked in 1.5 million USD. DIO value is 75 days by the end of the year.

  16. PENENTUAN CADANGAN PREMI UNTUK ASURANSI JOINT LIFE

    Directory of Open Access Journals (Sweden)

    NI LUH PUTU RATNA DEWI

    2016-01-01

    Full Text Available Premium reserve is a number of fund that need to be raised by insurance company in preparation for the payment of claims. This study aims to get the formula of premium reserve as well as the value of the premium reserve for joint life insurance by using retrospective calculation method. Joint life insurance participants in this study are limited to 2 people. Calculations in this study is using Indonesian Mortality Table (TMI 2011, joint life mortality tables, commutation tables, value of annuities, value of single premiums and constant annual premium and using constant interest rates of 5%. The results showed that by using age of the participant insurance joint life of x = 50 and y = 45 years and the premium payment period of t = 10 years, we obtained that the value of premium reserve from the end of the first year until the  end of the 11th year has increased every year, while the value of premium reserves from the end of the 12th year and so on until a lifetime has decreased every year.

  17. The Krebs Uric Acid Cycle: A Forgotten Krebs Cycle.

    Science.gov (United States)

    Salway, Jack G

    2018-05-25

    Hans Kornberg wrote a paper entitled 'Krebs and his trinity of cycles' commenting that every school biology student knows of the Krebs cycle, but few know that Krebs discovered two other cycles. These are (i) the ornithine cycle (urea cycle), (ii) the citric acid cycle (tricarboxylic acid or TCA cycle), and (iii) the glyoxylate cycle that was described by Krebs and Kornberg. Ironically, Kornberg, codiscoverer of the 'glyoxylate cycle', overlooked a fourth Krebs cycle - (iv) the uric acid cycle. Copyright © 2018 Elsevier Ltd. All rights reserved.

  18. Driving and engine cycles

    CERN Document Server

    Giakoumis, Evangelos G

    2017-01-01

    This book presents in detail the most important driving and engine cycles used for the certification and testing of new vehicles and engines around the world. It covers chassis and engine-dynamometer cycles for passenger cars, light-duty vans, heavy-duty engines, non-road engines and motorcycles, offering detailed historical information and critical review. The book also provides detailed examples from SI and diesel engines and vehicles operating during various cycles, with a focus on how the engine behaves during transients and how this is reflected in emitted pollutants, CO2 and after-treatment systems operation. It describes the measurement methods for the testing of new vehicles and essential information on the procedure for creating a driving cycle. Lastly, it presents detailed technical specifications on the most important chassis-dynamometer cycles around the world, together with a direct comparison of those cycles.

  19. International Business Cycle

    OpenAIRE

    Marek Lubiński

    2007-01-01

    Prime stylized facts of international business cycle theory refer to positive correlation in the cyclical components of important macroeconomic variables across countries. However a number of indicators of business cycle synchronization do not point to clear trends. It can be ascribed to the fact that different forces influence level of business cycle correlation. When investigating into the forces behind the commonness in aggregate fluctuations economic research seems to have pointed in two ...

  20. Fast breeder fuel cycle

    International Nuclear Information System (INIS)

    1978-09-01

    Basic elements of the ex-reactor part of the fuel cycle (reprocessing, fabrication, waste handling and transportation) are described. Possible technical and proliferation measures are evaluated, including current methods of accountability, surveillance and protection. The reference oxide based cycle and advanced cycles based on carbide and metallic fuels are considered utilizing conventional processes; advanced nonaqueous reprocessing is also considered. This contribution provides a comprehensive data base for evaluation of proliferation risks

  1. [Cycling in Zagreb].

    Science.gov (United States)

    Matos, Stipan; Krapac, Ladislav; Krapac, Josip

    2007-01-01

    Cycling in Zagreb, as means of urban transport inside and outside the city, has a bright past, hazy presence but a promising future. Every day, aggressive citizens who lack urban traffic culture mistreat many cyclists but also many pedestrians. Sedentary way of living, unhealthy eating habits and inadequate recreation would surely be reduced if Zagreb had a network of cycling tracks (190 cm) or lanes (80 cm). Main city roads were constructed at the beginning of the 20th century. Today, the lack of cycling tracks is particularly evident in terms of missing connections between northern and southern parts of the city. Transportation of bikes in public vehicles, parking of bikes as well as cycling along the foot of the mountains Medvednica and Zumberacko gorje is not adequately organized. Better organization is necessary not only because of the present young generation but also because of the young who will shortly become citizens of the EU, where cycling is enormously popular. Cycling tourism is not known in Zagreb, partly due to inadequate roads. The surroundings of Zagreb are more suitable for cycling tourism and attractive brochures and tourist guides offer information to tourists on bikes. Professional, acrobatic and sports cycling do not have a tradition in Zagreb and in Croatia. The same holds true for recreational cycling and indoor exercise cycling. The authors discuss the impact of popularization of cycling using print and electronic media. The role of district and local self-government in the construction and improvement of traffic roads in Zagreb is very important. It is also significant for the implementation of legal regulations that must be obeyed by all traffic participants in order to protect cyclists, the most vulnerable group of traffic participants besides passengers. Multidisciplinary action of all benevolent experts would surely increase safety and pleasure of cycling in the city and its surroundings. This would also help reduce daily stress and

  2. Measuring Business Cycle Time.

    OpenAIRE

    Stock, James H

    1987-01-01

    The business cycle analysis of Arthur F. Burns and Wesley C. Mitchell and the National Bureau of Economic Research presumed that aggregate economic variables evolve on a time scale defined by business cycle turning points rather than by months or quarters. Do macroeconomic variables appear to evolve on an economic rather than a calendar time scale? Evidence presented here suggests that they do. However, the estimated economic time scales are only weakly related to business cycle time scales, ...

  3. Thorium cycles and proliferation

    International Nuclear Information System (INIS)

    Lovins, A.B.

    1979-01-01

    This paper analyzes several prevalent misconceptions about nuclear fuel cycles that breed fissile uranium-233 from thorium. Its main conclusions are: U-233, despite the gamma radioactivity of associated isotopes, is a rather attractive material for making fission bombs, and is a credible material for subnational as well as national groups to use for this purpose; (2) pure thorium cycles, which in effect merely substitute U-233 for Pu, would take many decades and much U to establish, and offer no significant safeguards advantage over Pu, cycles; (3) denatured Th-U cycles, which dilute the U-233 with inert U-238 to a level not directly usable in bombs, are not an effective safeguard even against subnational bomb-making; (4) several other features of mixed Th-U cycles are rather unattractive from a safeguards point of view; (5) thus, Th cycles of any kind are not a technical fix for proliferation (national or subnational) and, though probably more safeguardable than Pu cycles, are less so than once-through U cycles that entail no reprocessing; (6) while thorium cycles have some potential technical advantages, including flexibility, they cannot provide major savings in nuclear fuel resources compared to simpler ways of saving neutrons and U; and (7) while advocates of nuclear power may find Th cycles worth exploring, such cycles do not differ fundamentally from U cycles in any of the respects--including safeguards and fuel resources--that are relevant to the broader nuclear debate, and should not be euphorically embraced as if they did

  4. Alternative fuel cycles

    International Nuclear Information System (INIS)

    Penn, W.J.

    1979-05-01

    Uranium resource utilization and economic considerations provide incentives to study alternative fuel cycles as future options to the PHWR natural uranium cycle. Preliminary studies to define the most favourable alternatives and their possible introduction dates are discussed. The important and uncertain components which influence option selection are reviewed, including nuclear capacity growth, uranium availability and demand, economic potential, and required technological developments. Finally, a summary of Ontario Hydro's program to further assess cycle selection and define development needs is given. (auth)

  5. Edgeworth cycles revisited

    International Nuclear Information System (INIS)

    Doyle, Joseph; Muehlegger, Erich; Samphantharak, Krislert

    2010-01-01

    Some gasoline markets exhibit remarkable price cycles, where price spikes are followed by a series of small price declines: a pattern consistent with a model of Edgeworth cycles described by Maskin and Tirole. We extend the model and empirically test its predictions with a new dataset of daily station-level prices in 115 US cities. Consistent with the theory, and often in contrast with previous empirical work, we find the least and most concentrated markets are much less likely to exhibit cycling behavior both within and across cities; areas with more independent convenience-store gas stations are also more likely to cycle. (author)

  6. Life cycle management (LCM)

    DEFF Research Database (Denmark)

    Remmen, Arne; Thrane, Mikkel

    2004-01-01

    The chapter gives an introduction to Life Cycle Management (LCM) and shows how LCM can be practiced in different contexts and at different ambition levels.......The chapter gives an introduction to Life Cycle Management (LCM) and shows how LCM can be practiced in different contexts and at different ambition levels....

  7. Nutrient cycling strategies.

    NARCIS (Netherlands)

    Breemen, van N.

    1995-01-01

    This paper briefly reviews pathways by which plants can influence the nutrient cycle, and thereby the nutrient supply of themselves and of their competitors. Higher or lower internal nutrient use efficiency positively feeds back into the nutrient cycle, and helps to increase or decrease soil

  8. Life Cycle Impact Assessment

    DEFF Research Database (Denmark)

    Rosenbaum, Ralph K.; Hauschild, Michael Zwicky; Boulay, Anne-Marie

    2018-01-01

    This chapter is dedicated to the third phase of an LCA study, the Life Cycle Impact Assessment (LCIA) where the life cycle inventory’s information on elementary flows is translated into environmental impact scores. In contrast to the three other LCA phases, LCIA is in practice largely automated...

  9. Rock Cycle Roulette.

    Science.gov (United States)

    Schmidt, Stan M.; Palmer, Courtney

    2000-01-01

    Introduces an activity on the rock cycle. Sets 11 stages representing the transitions of an earth material in the rock cycle. Builds six-sided die for each station, and students move to the stations depending on the rolling side of the die. Evaluates students by discussing several questions in the classroom. Provides instructional information for…

  10. Universal cycle periods

    NARCIS (Netherlands)

    Groot, de E.A. (Bert); Franses, P.H.P.H.

    2009-01-01

    We present a meta-analysis of cycles in historical economic data. The literature on stochastic and deterministic cycles in variables such as the consumer price index, employment, interest rates, commodity prices, and GDP is huge and scattered, but our meta-analysis reveals various communalities. Our

  11. Stability through cycles

    NARCIS (Netherlands)

    E.A. de Groot (Bert); Ph.H.B.F. Franses (Philip Hans)

    2006-01-01

    textabstractEconomic variables like GDP growth, employment, interest rates and consumption show signs of cyclical behavior. Many variables display multiple cycles, with lengths ranging in between 5 to even up to 100 years. We argue that multiple cycles can be associated with long-run stability of

  12. Two Quantum Polytropic Cycles

    Science.gov (United States)

    Arias-Hernández, L. A.; Morales-Serrano, A. F.

    2002-11-01

    In this work we follow the Bender et al paper [1] to study the quantum analogues of the Stirling and Ericsson polytropic cycles. In the context of the classical thermodynamics, the Stirling and Ericsson cycles correspond to reversible heat engines with two isothermal processes joined by two polytropic branches which occur in a device called regenerator. If this device is an ideal one, the efficiency of these cycles is the Carnot efficiency. Here, we introduce the quantum analogues of the Stirling and Ericsson cycles, the first one based on a double square potential well with a finite potential barrier, since in this system the tunnel effect could be the analogue to the regeneration classical process, therefore the isochoric quantum branches would really correspond to an internal energy storage, and the last one with an unknown system where the isobaric quantum processes don't induce changes in its quantum state. With these systems the quantum engines have cycles consisting of polytropic and isothermal quantum processes analogues to the corresponding classical processes. We show that in both cases the quantum cycles have an efficiency given by ηCQM = 1 - EC/EH, which is the same expression for the quantum analogue of the Carnot cycle studied by Bender.

  13. Fuel cycle management

    International Nuclear Information System (INIS)

    Herbin, H.C.

    1977-01-01

    The fuel cycle management is more and more dependent on the management of the generation means among the power plants tied to the grid. This is due mainly because of the importance taken by the nuclear power plants within the power system. The main task of the fuel cycle management is to define the refuelling pattern of the new and irradiated fuel assemblies to load in the core as a function of: 1) the differences which exist between the actual conditions of the core and what was expected for the present cycle, 2) the operating constraints and the reactor availability, 3) the technical requirements in safety and the technological limits of the fuel, 4) the economics. Three levels of fuel cycle management can be considered: 1) a long term management: determination of enrichments and expected cycle lengths, 2) a mid term management whose aim corresponds to the evaluation of the batch to load within the core as a function of both: the next cycle length to achieve and the integrated power history of all the cycles up to the present one, 3) a short term management which deals with the updating of the loaded fuel utilisations to take into account the operation perturbations, or with the alteration of the loading pattern of the next batch to respect unexpected conditions. (orig.) [de

  14. On approximating restricted cycle covers

    NARCIS (Netherlands)

    Manthey, Bodo

    2008-01-01

    A cycle cover of a graph is a set of cycles such that every vertex is part of exactly one cycle. An $L$-cycle cover is a cycle cover in which the length of every cycle is in the set $L$. The weight of a cycle cover of an edge-weighted graph is the sum of the weights of its edges. We come close to

  15. Future fuel cycles

    International Nuclear Information System (INIS)

    Archinoff, G.H.

    1980-01-01

    A fuel cycle must offer both financial and resource savings if it is to be considered for introduction into Ontario's nuclear system. The most promising alternative CANDU fuel cycles are examined in the context of both of these factors over a wide range of installed capacity growth rates and economic assumptions, in order to determine which fuel cycle, or cycles, should be introduced, and when. It is concluded that the optimum path for the long term begins with the prompt introduction of the low-enriched-uranium fuel cycle. For a wide range of conditions, this cycle remains the optimum throughout the very long term. Conditions of rapid nuclear growth and very high uranium price escalation rates warrant the supersedure of the low-enriched-uranium cycle by either a plutonium-topped thorium cycle or plutonium recycle, beginning between 2010 and 2025. It is also found that the uranium resource position is sound in terms of both known resources and production capability. Moreover, introduction of the low-enriched-uranium fuel cycle and 1250 MWe reactor units will assure the economic viability of nuclear power until at least 2020, even if uranium prices increase at a rate of 3.5% above inflation. The interrelationship between these two conclusions lies in the tremendous incentive for exploration which will occur if the real uranium price escalation rate is high. From a competitive viewpoint, nuclear power can withstand increases in the price of uranium. However, such increases will likely further expand the resource base, making nuclear an even more reliable energy source. (auth)

  16. International Business Cycle Accounting

    OpenAIRE

    Keisuke Otsu

    2009-01-01

    In this paper, I extend the business cycle accounting method a la Chari, Kehoe and McGrattan (2007) to a two-country international business cycle model and quantify the effect of the disturbances in relevant markets on the business cycle correlation between Japan and the US over the 1980-2008 period. This paper finds that disturbances in the labor market and production efficiency are important in accounting for the recent increase in the cross-country output correlation. If international fina...

  17. Life Cycle Sustainability Dashboard

    DEFF Research Database (Denmark)

    Traverso, Marzia; Finkbeiner, Matthias; Jørgensen, Andreas

    2012-01-01

    One method to assess the sustainability performance of products is life cycle sustainability assessment (LCSA), which assesses product performance considering the environmental,economic, and social dimensions of the life cycle. The results of LCSA can be used to compare different products...... of sustainability is the communicability of the results by means of a graphical representation (a cartogram), characterized by a suitable chromatic scale and ranking score. The integration of LCSA and the dashboard of sustainability into a so-called Life Cycle Sustainability Dashboard (LCSD) is described here...

  18. STUDYING BUSINESS CYCLES SYNCHRONIZATION

    Directory of Open Access Journals (Sweden)

    N. Servetnyk

    2014-06-01

    Full Text Available The paper researches business cycles synchronization. The fluctuations in post-Soviet countries are considered. The study examines different measures of synchronization in groups of countries according to some criteria.

  19. The thorium fuel cycle

    International Nuclear Information System (INIS)

    Merz, E.R.

    1977-01-01

    The utilization of the thorium fuel cycle has long since been considered attractive owing to the excellent neutronic characteristics of 233 U, and the widespread and cheap thorium resources. Rapidly increasing uranium prices, public reluctance for widespread Pu recycling and expected delays for the market penetration of fast breeders have led to a reconsideration of the thorium fuel cycle merits. In addition, problems associated with reprocessing and waste handling, particularly with re-fabrication by remote handling of 233 U, are certainly not appreciably more difficult than for Pu recycling. To divert from uranium as a nuclear energy source it seems worth while intensifying future efforts for closing the Th/ 233 U fuel cycle. HTGRs are particularly promising for economic application. However, further research and development activities should not concentrate on this reactor type alone. Light- and heavy-water-moderated reactors, and even future fast breeders, may just as well take advantage of a demonstrated thorium fuel cycle. (author)

  20. Educational Business Cycles

    DEFF Research Database (Denmark)

    Tepe, Markus; Vanhuysse, Pieter

    Strong institutional constraints and better-informed voters may lead re-election seeking incumbents to shift the use of political business cycle mechanisms away from monetary and fiscal policy towards other policy domains that are more easily manipulable, targetable, and timeable. We investigate...... teacher employment patterns at the state level in Germany and find strong evidence of cycling mechanisms, in the form of electioneering and honeymooning. Against a backdrop of a continuously shrinking total teachers' pool, German state-level incumbents accelerate the hiring of new teachers during election...... periods and partly reverse this during politically safer points in the electoral cycle. Cycles are mediated by issue salience: heightened attention to German public schooling after the notorious PISA-2000 tests further strengthens the manipulation of new teacher hiring for electoral purposes....

  1. Educational Business Cycles

    DEFF Research Database (Denmark)

    Tepe, Markus; Vanhuysse, Pieter

    2009-01-01

    Strong institutional constraints and better-informed voters may lead re-election seeking incumbents to shift the use of political business cycle mechanisms away from monetary and fiscal policy towards other policy domains that are more easily manipulable, targetable, and timeable. We investigate...... teacher employment patterns at the state level in Germany and find strong evidence of cycling mechanisms, in the form of electioneering and honeymooning. Against a backdrop of a continuously shrinking total teachers' pool, German state-level incumbents accelerate the hiring of new teachers during election...... periods and partly reverse this during politically safer points in the electoral cycle. Cycles are mediated by issue salience: heightened attention to German public schooling after the notorious PISA-2000 tests further strengthens the manipulation of new teacher hiring for electoral purposes....

  2. Cycles in graphs

    CERN Document Server

    Alspach, BR

    1985-01-01

    This volume deals with a variety of problems involving cycles in graphs and circuits in digraphs. Leading researchers in this area present here 3 survey papers and 42 papers containing new results. There is also a collection of unsolved problems.

  3. The Rock Cycle

    Science.gov (United States)

    Singh, Raman J.; Bushee, Jonathan

    1977-01-01

    Presents a rock cycle diagram suitable for use at the secondary or introductory college levels which separates rocks formed on and below the surface, includes organic materials, and separates products from processes. (SL)

  4. Extended fuel cycle length

    International Nuclear Information System (INIS)

    Bruyere, M.; Vallee, A.; Collette, C.

    1986-09-01

    Extended fuel cycle length and burnup are currently offered by Framatome and Fragema in order to satisfy the needs of the utilities in terms of fuel cycle cost and of overall systems cost optimization. We intend to point out the consequences of an increased fuel cycle length and burnup on reactor safety, in order to determine whether the bounding safety analyses presented in the Safety Analysis Report are applicable and to evaluate the effect on plant licensing. This paper presents the results of this examination. The first part indicates the consequences of increased fuel cycle length and burnup on the nuclear data used in the bounding accident analyses. In the second part of this paper, the required safety reanalyses are presented and the impact on the safety margins of different fuel management strategies is examined. In addition, systems modifications which can be required are indicated

  5. Fuel cycle studies

    International Nuclear Information System (INIS)

    Anon.

    1978-01-01

    Programs are being conducted in the following areas: advanced solvent extraction techniques, accident consequences, fuel cycles for nonproliferation, pyrochemical and dry processes, waste encapsulation, radionuclide transport in geologic media, hull treatment, and analytical support for LWBR

  6. Traffic Signal Cycle Lengths

    Data.gov (United States)

    Town of Chapel Hill, North Carolina — Traffic signal location list for the town of Chapel Hill. This data set includes light cycle information as well as as intersection information.The Town of Chapel...

  7. International Real Business Cycles

    OpenAIRE

    Mario J. Crucini

    2006-01-01

    This paper is a non-technical review of research developments in the international real business cycle literature. International business cycle facts are summarize with particular attention to the sources of output variance from the expenditure side of the NIPA and the production side, using a familiar neoclassical production function. Theoretical developments focus on the how consumption smoothing and investment dynamics shape the current account; the search for sources and propagation mecha...

  8. The global carbon cycle

    International Nuclear Information System (INIS)

    Maier-Reimer, E.

    1991-01-01

    Basic concepts of the global carbon cycle on earth are described; by careful analyses of isotopic ratios, emission history and oceanic ventilation rates are derived, which provide crucial tests for constraining and calibrating models. Effects of deforestation, fertilizing, fossil fuel burning, soil erosion, etc. are quantified and compared, and the oceanic carbon process is evaluated. Oceanic and terrestrial biosphere modifications are discussed and a carbon cycle model is proposed

  9. IFR fuel cycle

    International Nuclear Information System (INIS)

    Battles, J.E.; Miller, W.E.; Lineberry, M.J.; Phipps, R.D.

    1992-01-01

    The next major milestone of the IFR program is engineering-scale demonstration of the pyroprocess fuel cycle. The EBR-II Fuel Cycle Facility has just entered a startup phase, which includes completion of facility modifications and installation and cold checkout of process equipment. This paper reviews the development of the electrorefining pyroprocess, the design and construction of the facility for the hot demonstration, the design and fabrication of the equipment, and the schedule and initial plan for its operation

  10. Hat cycle dynamic simulation

    International Nuclear Information System (INIS)

    Trucco, A.; Corallo, C.; Pini Prato, A.; Porro, S.

    1999-01-01

    Among the innovative cycle recently proposed in literature, the Humid Air Turbine Cycle - Hat better seems to fulfil the main energy market requirements of today: High efficiency in a large power ranger, low pollution, low specific capital cost. The previous results of an analysis at partial load and transient conditions are here presented, where the Hat plant has been simulated using the original model implemented in LEGO environment [it

  11. Quantifying the Adaptive Cycle.

    Directory of Open Access Journals (Sweden)

    David G Angeler

    Full Text Available The adaptive cycle was proposed as a conceptual model to portray patterns of change in complex systems. Despite the model having potential for elucidating change across systems, it has been used mainly as a metaphor, describing system dynamics qualitatively. We use a quantitative approach for testing premises (reorganisation, conservatism, adaptation in the adaptive cycle, using Baltic Sea phytoplankton communities as an example of such complex system dynamics. Phytoplankton organizes in recurring spring and summer blooms, a well-established paradigm in planktology and succession theory, with characteristic temporal trajectories during blooms that may be consistent with adaptive cycle phases. We used long-term (1994-2011 data and multivariate analysis of community structure to assess key components of the adaptive cycle. Specifically, we tested predictions about: reorganisation: spring and summer blooms comprise distinct community states; conservatism: community trajectories during individual adaptive cycles are conservative; and adaptation: phytoplankton species during blooms change in the long term. All predictions were supported by our analyses. Results suggest that traditional ecological paradigms such as phytoplankton successional models have potential for moving the adaptive cycle from a metaphor to a framework that can improve our understanding how complex systems organize and reorganize following collapse. Quantifying reorganization, conservatism and adaptation provides opportunities to cope with the intricacies and uncertainties associated with fast ecological change, driven by shifting system controls. Ultimately, combining traditional ecological paradigms with heuristics of complex system dynamics using quantitative approaches may help refine ecological theory and improve our understanding of the resilience of ecosystems.

  12. The Nuclear Fuel Cycle

    International Nuclear Information System (INIS)

    2011-08-01

    This brochure describes the nuclear fuel cycle, which is an industrial process involving various activities to produce electricity from uranium in nuclear power reactors. The cycle starts with the mining of uranium and ends with the disposal of nuclear waste. The raw material for today's nuclear fuel is uranium. It must be processed through a series of steps to produce an efficient fuel for generating electricity. Used fuel also needs to be taken care of for reuse and disposal. The nuclear fuel cycle includes the 'front end', i.e. preparation of the fuel, the 'service period' in which fuel is used during reactor operation to generate electricity, and the 'back end', i.e. the safe management of spent nuclear fuel including reprocessing and reuse and disposal. If spent fuel is not reprocessed, the fuel cycle is referred to as an 'open' or 'once-through' fuel cycle; if spent fuel is reprocessed, and partly reused, it is referred to as a 'closed' nuclear fuel cycle.

  13. Thorium fuel cycle analysis

    Energy Technology Data Exchange (ETDEWEB)

    Yamaji, K [Central Research Inst. of Electric Power Industry, Tokyo (Japan)

    1980-07-01

    Systems analysis of the thorium cycle, a nuclear fuel cycle accomplished by using thorium, is reported in this paper. Following a brief review on the history of the thorium cycle development, analysis is made on the three functions of the thorium cycle; (1) auxiliary system of U-Pu cycle to save uranium consumption, (2) thermal breeder system to exert full capacity of the thorium resource, (3) symbiotic system to utilize special features of /sup 233/U and neutron sources. The effects of the thorium loading in LWR (Light Water Reactor), HWR (Heavy Water Reactor) and HTGR (High Temperature Gas-cooled Reactor) are considered for the function of auxiliary system of U-Pu cycle. Analysis is made to find how much uranium is saved by /sup 233/U recycling and how the decrease in Pu production influences the introduction of FBR (Fast Breeder Reactor). Study on thermal breeder system is carried out in the case of MSBR (Molten Salt Breeder Reactor). Under a certain amount of fissile material supply, the potential system expansion rate of MSBR, which is determined by fissile material balance, is superior to that of FBR because of the smaller specific fissile inventory of MSBR. For symbiotic system, three cases are treated; i) nuclear heat supply system using HTGR, ii) denatured fuel supply system for nonproliferation purpose, and iii) hybrid system utilizing neutron sources other than fission reactor.

  14. Cycles and Common Cycles in Property and Related Sectors

    OpenAIRE

    Peijie Wang

    2003-01-01

    This paper examines cycles and common cycles in the property market and the economy. While focusing on common cycles, the study also incorporates common trends in the meantime, so it covers the whole spectrum of dynamic analysis. It has been found that property shares common cycles, particularly with those sectors that are the user markets of property. The mechanisms of common cycles and the relative magnitudes of cycles of the sectors related to property are discussed to shed light on proper...

  15. Multiparameter Cell Cycle Analysis.

    Science.gov (United States)

    Jacobberger, James W; Sramkoski, R Michael; Stefan, Tammy; Woost, Philip G

    2018-01-01

    Cell cycle cytometry and analysis are essential tools for studying cells of model organisms and natural populations (e.g., bone marrow). Methods have not changed much for many years. The simplest and most common protocol is DNA content analysis, which is extensively published and reviewed. The next most common protocol, 5-bromo-2-deoxyuridine S phase labeling detected by specific antibodies, is also well published and reviewed. More recently, S phase labeling using 5'-ethynyl-2'-deoxyuridine incorporation and a chemical reaction to label substituted DNA has been established as a basic, reliable protocol. Multiple antibody labeling to detect epitopes on cell cycle regulated proteins, which is what this chapter is about, is the most complex of these cytometric cell cycle assays, requiring knowledge of the chemistry of fixation, the biochemistry of antibody-antigen reactions, and spectral compensation. However, because this knowledge is relatively well presented methodologically in many papers and reviews, this chapter will present a minimal Methods section for one mammalian cell type and an extended Notes section, focusing on aspects that are problematic or not well described in the literature. Most of the presented work involves how to segment the data to produce a complete, progressive, and compartmentalized cell cycle analysis from early G1 to late mitosis (telophase). A more recent development, using fluorescent proteins fused with proteins or peptides that are degraded by ubiquitination during specific periods of the cell cycle, termed "Fucci" (fluorescent, ubiquitination-based cell cycle indicators) provide an analysis similar in concept to multiple antibody labeling, except in this case cells can be analyzed while living and transgenic organisms can be created to perform cell cycle analysis ex or in vivo (Sakaue-Sawano et al., Cell 132:487-498, 2007). This technology will not be discussed.

  16. Historicising the Hydrosocial Cycle

    Directory of Open Access Journals (Sweden)

    Jeremy J. Schmidt

    2014-02-01

    Full Text Available This paper examines the historical claims made in support of the hydrosocial cycle. In particular, it considers how arguments advancing the hydrosocial cycle make historical claims regarding modernist conceptions of what water is (i.e. H2O and its fit with society. The paper gives special emphasis to the society/nature dualism and to the notion of agency as key sites of contest in arguments regarding the hydrosocial cycle. It finds that, while several versions of the hydrosocial cycle seek to advance a political ecology more sensitive to non-human actions, these same accounts often do not address the robust account of non-human agency in the historical record. Evidence is presented regarding water’s agency amongst late 19th and early 20th century architects of key water management norms in the United States. This evidence troubles accounts of the hydrosocial cycle that critique the US experience and suggests new directions for rethinking the role of historical and institutional norms in water policy.

  17. Superfluid thermodynamic cycle refrigerator

    Science.gov (United States)

    Swift, Gregory W.; Kotsubo, Vincent Y.

    1992-01-01

    A cryogenic refrigerator cools a heat source by cyclically concentrating and diluting the amount of .sup.3 He in a single phase .sup.3 He-.sup.4 He solution. The .sup.3 He in superfluid .sup.4 He acts in a manner of an ideal gas in a vacuum. Thus, refrigeration is obtained using any conventional thermal cycle, but preferably a Stirling or Carnot cycle. A single phase solution of liquid .sup.3 He at an initial concentration in superfluid .sup.4 He is contained in a first variable volume connected to a second variable volume through a superleak device that enables free passage of .sup.4 He while restricting passage of .sup.3 He. The .sup.3 He is compressed (concentrated) and expanded (diluted) in a phased manner to carry out the selected thermal cycle to remove heat from the heat load for cooling below 1 K.

  18. The nuclear fuel cycle

    International Nuclear Information System (INIS)

    Patarin, L.

    2002-01-01

    This book treats of the different aspects of the industrial operations linked with the nuclear fuel, before and after its use in nuclear reactors. The basis science of this nuclear fuel cycle is chemistry. Thus a recall of the elementary notions of chemistry is given in order to understand the phenomena involved in the ore processing, in the isotope enrichment, in the fabrication of fuel pellets and rods (front-end of the cycle), in the extraction of recyclable materials (residual uranium and plutonium), and in the processing and conditioning of wastes (back-end of the fuel cycle). Nuclear reactors produce about 80% of the French electric power and the Cogema group makes 40% of its turnover at the export. Thus this book contains also some economic and geopolitical data in order to clearly position the stakes. The last part, devoted to the management of wastes, presents the solutions already operational and also the research studies in progress. (J.S.)

  19. Fuel cycle based safeguards

    International Nuclear Information System (INIS)

    De Montmollin, J.M.; Higinbotham, W.A.; Gupta, D.

    1985-07-01

    In NPT safeguards the same model approach and absolute-quantity inspection goals are applied at present to all similar facilities, irrespective of the State's fuel cycle. There is a continuing interest and activity on the part of the IAEA in new NPT safeguards approaches that more directly address a State's nuclear activities as a whole. This fuel cycle based safeguards system is expected to a) provide a statement of findings for the entire State rather than only for individual facilities; b) allocate inspection efforts so as to reflect more realistically the different categories of nuclear materials in the different parts of the fuel cycle and c) provide more timely and better coordinated information on the inputs, outputs and inventories of nuclear materials in a State. (orig./RF) [de

  20. The nuclear fuel cycle

    International Nuclear Information System (INIS)

    Jones, P.M.S.

    1987-01-01

    This chapter explains the distinction between fissile and fertile materials, examines briefly the processes involved in fuel manufacture and management, describes the alternative nuclear fuel cycles and considers their advantages and disadvantages. Fuel management is usually divided into three stages; the front end stage of production and fabrication, the back end stage which deals with the fuel after it is removed from the reactor (including reprocessing and waste treatment) and the stage in between when the fuel is actually in the reactor. These stages are illustrated and explained in detail. The plutonium fuel cycle and thorium-uranium-233 fuel cycle are explained. The differences between fuels for thermal reactors and fast reactors are explained. (U.K.)

  1. CO2 cycle

    Science.gov (United States)

    Titus, Timothy N.; Byrne, Shane; Colaprete, Anthony; Forget, Francois; Michaels, Timothy I.; Prettyman, Thomas H.

    2017-01-01

    This chapter discusses the use of models, observations, and laboratory experiments to understand the cycling of CO2 between the atmosphere and seasonal Martian polar caps. This cycle is primarily controlled by the polar heat budget, and thus the emphasis here is on its components, including solar and infrared radiation, the effect of clouds (water- and CO2-ice), atmospheric transport, and subsurface heat conduction. There is a discussion about cap properties including growth and regression rates, albedos and emissivities, grain sizes and dust and/or water-ice contamination, and curious features like cold gas jets and araneiform (spider-shaped) terrain. The nature of the residual south polar cap is discussed as well as its long-term stability and ability to buffer atmospheric pressures. There is also a discussion of the consequences of the CO2 cycle as revealed by the non-condensable gas enrichment observed by Odyssey and modeled by various groups.

  2. Political Budget Cycles

    DEFF Research Database (Denmark)

    Aaskoven, Lasse; Lassen, David Dreyer

    2017-01-01

    The political budget cycle—how elections affect government fiscal policy—is one of the most studied subjects in political economy and political science. The key theoretical question is whether incumbent governments can time or structure public finances in ways that improve their chances of reelec......The political budget cycle—how elections affect government fiscal policy—is one of the most studied subjects in political economy and political science. The key theoretical question is whether incumbent governments can time or structure public finances in ways that improve their chances...... on political budget cycles have recently focused on conditions under which such cycles are likely to obtain. Much recent research focuses on subnational settings, allowing comparisons of governments in similar institutional environments, and a consensus on the presences of cycles in public finances...

  3. Theory of limit cycles

    CERN Document Server

    Ye, Yan-Qian; Lo, Chi Y

    1986-01-01

    Over the past two decades the theory of limit cycles, especially for quadratic differential systems, has progressed dramatically in China as well as in other countries. This monograph, updating the 1964 first edition, includes these recent developments, as revised by eight of the author's colleagues in their own areas of expertise. The first part of the book deals with limit cycles of general plane stationary systems, including their existence, nonexistence, stability, and uniqueness. The second section discusses the global topological structure of limit cycles and phase-portraits of quadratic systems. Finally, the last section collects important results that could not be included under the subject matter of the previous two sections or that have appeared in the literature very recently. The book as a whole serves as a reference for college seniors, graduate students, and researchers in mathematics and physics.

  4. The thorium fuel cycle

    International Nuclear Information System (INIS)

    Merz, E.R.

    1977-01-01

    The utilization of the thorium fuel cycle has long since been considered attractive due to the excellent neutronic characteristics of 233 U, and the widespread and cheap thorium resources. Although the uranium ore as well as the separative work requirements are usually lower for any thorium-based fuel cycle in comparison to present uranium-plutonium fuel cycles of thermal water reactors, interest by nuclear industry has hitherto been marginal. Fast increasing uranium prices, public reluctance against widespread Pu-recycling and expected retardations for the market penetration of fast breeders have led to a reconsideration of the thorium fuel cycle merits. In addition, it could be learned in the meantime that problems associated with reprocessing and waste handling, but particularly with a remote refabrication of 233 U are certainly not appreciably more difficult than for Pu-recycling. This may not only be due to psychological constraints but be based upon technological as well as economical facts, which have been mostly neglected up till now. In order to diversify from uranium as a nuclear energy source it seems to be worthwhile to greatly intensify efforts in the future for closing the Th/ 233 U fuel cycle. HTGR's are particularly promising for economic application. However, further R and D activites should not be solely focussed on this reactor type alone. Light and heavy-water moderated reactors, as well as even fast breeders later on, may just as well take advantage of a demonstrated thorium fuel cycle. A summary is presented of the state-of-the-art of Th/ 233 U-recycling technology and the efforts still necessary to demonstrate this technology all the way through to its industrial application

  5. Steam turbine cycle

    International Nuclear Information System (INIS)

    Okuzumi, Naoaki.

    1994-01-01

    In a steam turbine cycle, steams exhausted from the turbine are extracted, and they are connected to a steam sucking pipe of a steam injector, and a discharge pipe of the steam injector is connected to an inlet of a water turbine. High pressure discharge water is obtained from low pressure steams by utilizing a pressurizing performance of the steam injector and the water turbine is rotated by the high pressure water to generate electric power. This recover and reutilize discharged heat of the steam turbine effectively, thereby enabling to improve heat efficiency of the steam turbine cycle. (T.M.)

  6. Life Cycle Environmental Management

    DEFF Research Database (Denmark)

    Pedersen, Claus Stig; Jørgensen, Jørgen; Pedersen, Morten Als

    1996-01-01

    A precondition for environmentally conscious management is the awareness of the environmental impact potentials created by an industrial company. There is an obvious need for management tools to support the implementation of relevant environmental criteria into the industrial decision making...... processes. The discipline of life cycle environmental management (LCEM) focuses on the incorporation of environmental criteria from the life cycles of products and other company activities into the company management processes. This paper introduces the concept of LCEM as an important element...... of the complete set of environmental objects in an industrial manufacturing company....

  7. Carbon cycle makeover

    DEFF Research Database (Denmark)

    Canfield, Donald Eugene; Kump, Lee R.

    2013-01-01

    remaining in sediments after respiration leave a residual of oxygen in the atmosphere. The source of oxygen to the atmosphere represented by organic matter burial is balanced by oxygen sinks associated with rock weathering and chemical reaction with volcanic gases. This is the long-term carbon and oxygen...... geochemical cycle. But Earth is an old planet, and oxygen levels have changed through time (2). On page 540 of this issue, Schrag et al. (3) challenge the most commonly used geochemical approach to assess long-term changes in the coupled oxygen and carbon cycles....

  8. Resurrecting Equilibria Through Cycles

    DEFF Research Database (Denmark)

    Barnett, Richard C.; Bhattacharya, Joydeep; Bunzel, Helle

    equilibria because they asymptotically violate some economic restriction of the model. The literature has always ruled out such paths. This paper studies a pure-exchange monetary overlapping generations economy in which real balances cycle forever between momentary equilibrium points. The novelty is to show...... that segments of the offer curve that have been previously ignored, can in fact be used to produce asymptotically valid cyclical paths. Indeed, a cycle can bestow dynamic validity on momentary equilibrium points that had erstwhile been classified as dynamically invalid....

  9. 24-month fuel cycles

    International Nuclear Information System (INIS)

    Rosenstein, R.G.; Sipes, D.E.; Beall, R.H.; Donovan, E.J.

    1986-01-01

    Twenty-four month reload cycles can potentially lessen total power generation costs. While 24-month cores increase purchased fuel costs, the longer cycles reduce the number of refueling outages and thus enhance plant availability; men-rem exposure to site personnel and other costs associated with reload core design and licensing are also reduced. At dual unit sites an operational advantage can be realized by refueling each plant alternately on a 1-year offset basis. This results in a single outage per site per year which can be scheduled for off-peak periods or when replacement power costs are low

  10. Global water cycle

    Science.gov (United States)

    Robertson, Franklin; Goodman, Steven J.; Christy, John R.; Fitzjarrald, Daniel E.; Chou, Shi-Hung; Crosson, William; Wang, Shouping; Ramirez, Jorge

    1993-01-01

    This research is the MSFC component of a joint MSFC/Pennsylvania State University Eos Interdisciplinary Investigation on the global water cycle extension across the earth sciences. The primary long-term objective of this investigation is to determine the scope and interactions of the global water cycle with all components of the Earth system and to understand how it stimulates and regulates change on both global and regional scales. Significant accomplishments in the past year are presented and include the following: (1) water vapor variability; (2) multi-phase water analysis; (3) global modeling; and (4) optimal precipitation and stream flow analysis and hydrologic processes.

  11. Menstrual cycle pattern and fertility

    DEFF Research Database (Denmark)

    Kolstad, Henrik A.; Bonde, Jens Peter; Hjøllund, Niels Henrik

    1999-01-01

    To characterize how the menstrual cycle pattern relates to fertility regardless of potential biases caused by inappropriate coital timing during the menstrual cycle or early embryonal loss.......To characterize how the menstrual cycle pattern relates to fertility regardless of potential biases caused by inappropriate coital timing during the menstrual cycle or early embryonal loss....

  12. Entrepreneurship and the business cycle

    NARCIS (Netherlands)

    Koellinger, Philipp D.; Thurik, A. Roy

    2012-01-01

    We find new empirical regularities in the business cycle in a cross-country panel of 22 OECD countries for the period 1972 to 2007; entrepreneurship Granger-causes the cycles of the world economy. Furthermore, the entrepreneurial cycle is positively affected by the national unemployment cycle. We

  13. World nuclear fuel cycle

    International Nuclear Information System (INIS)

    Anon.

    1979-01-01

    A coloured pull-out wall chart is presented showing the fuel cycle interests of the world. Place names are marked and symbols are used to indicate regions associated with uranium or thorium deposits, mining, milling, enrichment, reprocessing and fabrication. (UK)

  14. Deuterium in atmospheric cycle

    International Nuclear Information System (INIS)

    Pontikis, M.C.

    Interest of the study concerning the deuterium content variation (HDO) in the atmospheric water. Standards and measurement methods. Molecule HDO cycle in the atmospheric water. Application to the study of hail-generating cumulus-nimbus and of the mantle of snow [fr

  15. Nuclear fuel cycle

    International Nuclear Information System (INIS)

    1993-01-01

    Status of different nuclear fuel cycle phases in 1992 is discussed including the following issues: uranium exploration, resources, supply and demand, production, market prices, conversion, enrichment; reactor fuel technology; spent fuel management, as well as trends of these phases development up to the year 2010. 10 refs, 11 figs, 15 tabs

  16. Life Cycle Inventory Analysis

    DEFF Research Database (Denmark)

    Bjørn, Anders; Moltesen, Andreas; Laurent, Alexis

    2018-01-01

    of different sources. The output is a compiled inventory of elementary flows that is used as basis of the subsequent life cycle impact assessment phase. This chapter teaches how to carry out this task through six steps: (1) identifying processes for the LCI model of the product system; (2) planning...

  17. Fuel cycle centres

    International Nuclear Information System (INIS)

    Hagen, M.

    1977-01-01

    The concept of co-locating and integrating fuel cycle facilities at one site is discussed. This concept offers considerable advantages, especially in minimizing the amount of radioactive material to be transported on public roads. Safeguards and physical protection as relating to such an integrated system of facilities are analysed in detail, also industrial and commercial questions. An overall risk-benefit evaluation turns out to be in favour of fuel cycle centres. These centres seem to be specifically attractive with regard to the back end of the fuel cycle, including on-site disposal of radioactive wastes. The respective German approach is presented as an example. Special emphasis is given to the site selection procedures in this case. Time scale and cost for the implementation of this concept are important factors to be looked at. Since participation of governmental institutions in these centres seems to be indispensable their respective roles as compared to industry must be clearly defined. The idea of adjusting fuel cycle centres to regional rather than national use might be an attractive option, depending on the specific parameters in the region, though results of existing multinational ventures are inconclusive in this respect. Major difficulties might be expected e.g. because of different national safety regulations and standards as well as commercial conditions among partner countries. Public acceptance in the host country seems to be another stumbling block for the realization of this type of multinational facilities

  18. Life Cycle Collection Management

    Directory of Open Access Journals (Sweden)

    Helen Shenton

    2003-09-01

    Full Text Available Life cycle collection management is a way of taking a long-term approach to the responsible stewardship of the British Library's collections and is one of the Library's strategic strands. It defines the different stages in a collection item's existence over time. These stages range from selection and acquisitions processing, cataloguing and press marking, through to preventive conservation, storage and retrieval. Life cycle collection management seeks to identify the costs of each stage in order to show the economic interdependencies between the phases over time. It thereby aims to demonstrate the long-term consequences of what the library takes into its collections, by making explicit the financial and other implications of decisions made at the beginning of the life cycle for the next 100 plus years. This paper describes the work over the past year at the British Library on this complex and complicated subject. It presents the emerging findings and suggests how it can be used for practical reasons (by individual curators and selectors and for economic, governance and political purposes. The paper describes the next steps in the project, for example, on a predictive data model. The British Library is seeking to benchmark itself against comparable organisations in this area. It intends to work with others on specific comparison for example, of life cycle costing of electronic and paper journals, as a prelude to eliding digital and 'traditional' formats.

  19. Boundedly rational credit cycles

    OpenAIRE

    Sáez, María

    1996-01-01

    We propose an evolutionary model of a credit market. We show that the economy exhibits credit cycles. The model predicts dynamics which are consistent with some evidence about the Great Depression. Real shocks trigger episodes of credit--crunch which are observed in the process of adjustment towards the post shock equilibrium.

  20. 90-Day Cycle Handbook

    Science.gov (United States)

    Park, Sandra; Takahashi, Sola

    2013-01-01

    90-Day Cycles are a disciplined and structured form of inquiry designed to produce and test knowledge syntheses, prototyped processes, or products in support of improvement work. With any type of activity, organizations inevitably encounter roadblocks to improving performance and outcomes. These barriers might include intractable problems at…

  1. Mosquito Life Cycle

    Science.gov (United States)

    Knowing the stages of the mosquito's life will help you prevent mosquitoes around your home and help you choose the right pesticides for your needs, if you decide to use them. All mosquito species go through four distinct stages during their live cycle.

  2. Reasoning with Causal Cycles

    Science.gov (United States)

    Rehder, Bob

    2017-01-01

    This article assesses how people reason with categories whose features are related in causal cycles. Whereas models based on causal graphical models (CGMs) have enjoyed success modeling category-based judgments as well as a number of other cognitive phenomena, CGMs are only able to represent causal structures that are acyclic. A number of new…

  3. Skills, sunspots and cycles

    DEFF Research Database (Denmark)

    Busato, Francesco; Marchetti, Enrico

    This paper explores the ability of a class of one-sector,multi-input models to generate indeterminate equilibrium paths, andendogenous cycles, without relying on factors' hoarding. The modelpresents a novel theoretical economic mechanism that supportssunspot-driven expansions without requiring...

  4. WLTP Random Cycle Generator

    NARCIS (Netherlands)

    Kooijman, D.G.; Balau, A.E.; Wilkins, S.; Ligterink, N.; Cuelenaere, R.

    2015-01-01

    European light duty vehicle emission legislation is gradually shifting the focus from test procedures with merely static test cycles, towards procedures including Real Driving Emissions (RDE), as they are a mean to achieve the European (NOx) emission reduction target. Hence a RDE trip must represent

  5. WLTP random cycle generator

    NARCIS (Netherlands)

    Kooijman, D.G.; Balau, A.E.; Wilkins, S.; Ligterink, N.; Cuelenaere, R.

    2015-01-01

    European light duty vehicle emission legislation is gradually shifting the focus from test procedures with merely static test cycles, towards procedures including Real Driving Emissions (RDE), as they are a mean to achieve the European (NOx) emission reduction target. Hence a RDE trip must represent

  6. Combined-cycle plants

    International Nuclear Information System (INIS)

    Valenti, M.

    1991-01-01

    This paper reports that as tougher emissions standards take hold throughout the industrialized world, manufacturers such as GE, Siemens, Foster Wheeler, and Asea Brown Boveri are designing advanced combined-cycle equipment that offers improved environmental performance without sacrificing power efficiency

  7. ITER fuel cycle

    International Nuclear Information System (INIS)

    Leger, D.; Dinner, P.; Yoshida, H.

    1991-01-01

    Resulting from the Conceptual Design Activities (1988-1990) by the parties involved in the International Thermonuclear Experimental Reactor (ITER) project, this document summarizes the design requirements and the Conceptual Design Descriptions for each of the principal subsystems and design options of the ITER Fuel Cycle conceptual design. The ITER Fuel Cycle system provides for the handling of all tritiated water and gas mixtures on ITER. The system is subdivided into subsystems for fuelling, primary (torus) vacuum pumping, fuel processing, blanket tritium recovery, and common processes (including isotopic separation, fuel management and storage, and processes for detritiation of solid, liquid, and gaseous wastes). After an introduction describing system function and conceptual design procedure, a summary of the design is presented including a discussion of scope and main parameters, and the fuel design options for fuelling, plasma chamber vacuum pumping, fuel cleanup, blanket tritium recovery, and auxiliary and common processes. Design requirements are defined and design descriptions are given for the various subsystems (fuelling, plasma vacuum pumping, fuel cleanup, blanket tritium recovery, and auxiliary/common processes). The document ends with sections on fuel cycle design integration, fuel cycle building layout, safety considerations, a summary of the research and development programme, costing, and conclusions. Refs, figs and tabs

  8. Understanding Solar Cycle Variability

    Energy Technology Data Exchange (ETDEWEB)

    Cameron, R. H.; Schüssler, M., E-mail: cameron@mps.mpg.de [Max-Planck-Institut für Sonnensystemforschung, Justus-von-Liebig-Weg 3, D-37077 Göttingen (Germany)

    2017-07-10

    The level of solar magnetic activity, as exemplified by the number of sunspots and by energetic events in the corona, varies on a wide range of timescales. Most prominent is the 11-year solar cycle, which is significantly modulated on longer timescales. Drawing from dynamo theory, together with the empirical results of past solar activity and similar phenomena for solar-like stars, we show that the variability of the solar cycle can be essentially understood in terms of a weakly nonlinear limit cycle affected by random noise. In contrast to ad hoc “toy models” for the solar cycle, this leads to a generic normal-form model, whose parameters are all constrained by observations. The model reproduces the characteristics of the variable solar activity on timescales between decades and millennia, including the occurrence and statistics of extended periods of very low activity (grand minima). Comparison with results obtained with a Babcock–Leighton-type dynamo model confirm the validity of the normal-mode approach.

  9. The plutonium fuel cycles

    International Nuclear Information System (INIS)

    Pigford, T.H.; Ang, K.P.

    1975-01-01

    The quantities of plutonium and other fuel actinides have been calculated for equilibrium fuel cycles for 1000-MW water reactors fueled with slightly enriched uranium, water reactors fueled with plutonium and natural uranium, fast-breder reactors, gas-cooled reactors fueled with thorium and highly enriched uranium, and gas-cooled reactors fueled with thorium, plutonium and recycled uranium. The radioactivity quantities of plutonium, americium and curium processed yearly in these fuel cycles are greatest for the water reactors fueled with natural uranium and recycled plutonium. The total amount of actinides processed is calculated for the predicted future growth of the U.S. nuclear power industry. For the same total installed nuclear power capacity, the introduction of the plutonium breeder has little effect upon the total amount of plutonium in this century. The estimated amount of plutonium in the low-level process wastes in the plutonium fuel cycles is comparable to the amount of plutonium in the high-level fission product wastes. The amount of plutonium processed in the nuclear fuel cycles can be considerably reduced by using gas-cooled reactors to consume plutonium produced in uranium-fueled water reactors. These, and other reactors dedicated for plutonium utilization, could be co-located with facilities for fuel reprocessing ad fuel fabrication to eliminate the off-site transport of separated plutonium. (author)

  10. Fuel cycle oriented approach

    International Nuclear Information System (INIS)

    Petit, A.

    1987-01-01

    The term fuel cycle oriented approach is currently used to designate two quite different things: the attempt to consider all or part of a national fuel cycle as one material balance area (MBA) or to consider individual MBAs existing in a state while designing a unique safeguards approach for each and applying the principle of nondiscrimination to fuel cycles as a whole, rather than to individual facilities. The merits of such an approach are acceptability by the industry and comparison with the contemplated establishment of long-term criteria. The following points concern the acceptability by the industry: (1) The main interest of the industry is to keep an open international market and therefore, to have effective and efficient safeguards. (2) The main concerns of the industry regarding international safeguards are economic burden, intrusiveness, and discrimination. Answers to these legitimate concerns, which retain the benefits of a fuel cycle oriented approach, are needed. More specifically, the problem of reimbursing the operator the costs that he has incurred for the safeguards must be considered

  11. The Geologic Nitrogen Cycle

    Science.gov (United States)

    Johnson, B. W.; Goldblatt, C.

    2013-12-01

    N2 is the dominant gas in Earth's atmosphere, and has been so through the majority of the planet's history. Originally thought to only be cycled in significant amounts through the biosphere, it is becoming increasingly clear that a large degree of geologic cycling can occur as well. N is present in crustal rocks at 10s to 100s of ppm and in the mantle at 1s to perhaps 10s of ppm. In light of new data, we present an Earth-system perspective of the modern N cycle, an updated N budget for the silicate Earth, and venture to explain the evolution of the N cycle over time. In an fashion similar to C, N has a fast, biologically mediated cycle and a slower cycle driven by plate tectonics. Bacteria fix N2 from the atmosphere into bioavailable forms. N is then cycled through the food chain, either by direct consumption of N-fixing bacteria, as NH4+ (the primary waste form), or NO3- (the most common inorganic species in the modern ocean). Some organic material settles as sediment on the ocean floor. In anoxic sediments, NH4+ dominates; due to similar ionic radii, it can readily substitute for K+ in mineral lattices, both in sedimentary rocks and in oceanic lithosphere. Once it enters a subduction zone, N may either be volatilized and returned to the atmosphere at arc volcanoes as N2 or N2O, sequestered into intrusive igneous rocks (as NH4+?), or subducted deep into the mantle, likely as NH4+. Mounting evidence indicates that a significant amount of N may be sequestered into the solid Earth, where it may remain for long periods (100s m.y.) before being returned to the atmosphere/biosphere by volcanism or weathering. The magnitude fluxes into the solid Earth and size of geologic N reservoirs are poorly constrained. The size of the N reservoirs contained in the solid Earth directly affects the evolution of Earth's atmosphere. It is possible that N now sequestered in the solid Earth was once in the atmosphere, which would have resulted in a higher atmospheric pressure, and

  12. Riding the cycle

    Energy Technology Data Exchange (ETDEWEB)

    Webster, G. [Canadian Association of Petroleum Producers, Calgary, AB (Canada)

    2001-07-01

    The current state of the Canadian oil and natural gas industry is reviewed as part of a discussion of economic cycles focusing in particular on the most recent cycle and the impact it has had on the industry. The review of the state of the industry includes discussion of production, exports, commodity prices, the stimulating effect of price increases on the number of oil and natural gas wells drilled, drilling rig operating days. Also discussed are the effect of foreign exchange rates, capital spending, industry financial performance in terms of return on capital employed, the impact of oil and gas prices on Alberta provincial revenues, estimates of Canada's ultimate crude oil and natural gas resources potential, pipelines and pipeline proposals for northern gas, and projection of crude oil and natural gas production in Canada to 2010.

  13. Fuel cycle services

    International Nuclear Information System (INIS)

    Gruber, Gerhard J.

    1990-01-01

    TRIGA reactor operators are increasingly concerned about the back end of their Fuel Cycle due to a new environmental policy in the USA. The question how to close the Fuel Cycle will have to be answered by all operators sooner or later. Reprocessing of the TRIGA fuel elements is not available. Only long term storage and final disposal can be considered. But for such a storage or disposal a special treatment of the fuel elements and of course a final depository is necessary. NUKEM plans to undertake efforts to assist the TRIGA operators in this area. For that reason we need to know your special needs for today and tomorrow - so that potential processors can consider whether to offer these services on the market. (orig.)

  14. Riding the cycle

    International Nuclear Information System (INIS)

    Webster, G.

    2001-01-01

    The current state of the Canadian oil and natural gas industry is reviewed as part of a discussion of economic cycles focusing in particular on the most recent cycle and the impact it has had on the industry. The review of the state of the industry includes discussion of production, exports, commodity prices, the stimulating effect of price increases on the number of oil and natural gas wells drilled, drilling rig operating days. Also discussed are the effect of foreign exchange rates, capital spending, industry financial performance in terms of return on capital employed, the impact of oil and gas prices on Alberta provincial revenues, estimates of Canada's ultimate crude oil and natural gas resources potential, pipelines and pipeline proposals for northern gas, and projection of crude oil and natural gas production in Canada to 2010

  15. Assessing Cycling Participation in Australia

    Directory of Open Access Journals (Sweden)

    Chris Rissel

    2013-01-01

    Full Text Available Planning and evaluating cycling programs at a national or state level requires accurate measures of cycling participation. However, recent reports of cycling participation have produced very different estimates. This paper examines the reported rates of cycling in five recent population surveys of cycling. Three surveys (one national and two from Sydney asking respondents when they last rode a bicycle generated cycling participation (cycled in the past year estimates of 29.7%, 34.1% and 28.9%. Two other national surveys which asked participants to recall (unprompted any physical activity done for exercise, recreation or sport in the previous 12 months, estimated cycling in the past year as 11.1% and 6.5%. While unprompted recall of cycling as a type of physical activity generates lower estimates of cycling participation than specific recall questions, both assessment approaches produced similar patterns of cycling by age and sex with both approaches indicating fewer women and older adults cycling. The different question styles most likely explain the substantial discrepancies between the estimates of cycling participation. Some differences are to be expected due to sampling variability, question differences, and regional variation in cycling.

  16. Forests and water cycle

    Directory of Open Access Journals (Sweden)

    Iovino F

    2009-06-01

    Full Text Available Based on a comprehensive literature analysis, a review on factors that control water cycle and water use in Mediterranean forest ecosystems is presented, including environmental variables and silvicultural treatments. This important issue is considered in the perspective of sustainable forest management of Mediterranean forests, with special regard to crucial environmental hazards such as forest fires and desertification risks related to climate change.

  17. Stirling cycle engine

    Science.gov (United States)

    Lundholm, Gunnar

    1983-01-01

    In a Stirling cycle engine having a plurality of working gas charges separated by pistons reciprocating in cylinders, the total gas content is minimized and the mean pressure equalization among the serial cylinders is improved by using two piston rings axially spaced at least as much as the piston stroke and by providing a duct in the cylinder wall opening in the space between the two piston rings and leading to a source of minimum or maximum working gas pressure.

  18. The nuclear fuel cycle

    International Nuclear Information System (INIS)

    Anon.

    1975-01-01

    The papers presented at the International Conference on The Nuclear Fuel Cycle, held at Stockholm, 28 to 31 October 1975, are reviewed. The meeting, organised by the U.S. Atomic Industrial Forum, and the Swedish Nuclear Forum, was concerned more particularly with economic, political, social and commercial aspects than with tecnology. The papers discussed were considered under the subject heading of current status, uranium resources, enrichment, and reprocessing. (U.K.)

  19. Nuclear fuel cycle

    Energy Technology Data Exchange (ETDEWEB)

    1975-12-01

    The papers presented at the International Conference on The Nuclear Fuel Cycle, held at Stockholm, 28 to 31 October 1975, are reviewed. The meeting, organised by the U.S. Atomic Industrial Forum, and the Swedish Nuclear Forum, was concerned more particularly with economic, political, social and commercial aspects than with tecnology. The papers discussed were considered under the subject heading of current status, uranium resources, enrichment, and reprocessing.

  20. Alternative nuclear fuel cycles

    International Nuclear Information System (INIS)

    Till, C.E.

    1979-01-01

    This diffuse subject involves value judgments that are political as well as technical, and is best understood in that context. The four questions raised here, however, are mostly from the technical viewpoints: (1) what are alternative nuclear fuel cycles; (2) what generalizations are possible about their characteristics; (3) what are the major practical considerations; and (4) what is the present situation and what can be said about the outlook for the future

  1. HCl removal using cycled carbide slag from calcium looping cycles

    International Nuclear Information System (INIS)

    Xie, Xin; Li, Yingjie; Wang, Wenjing; Shi, Lei

    2014-01-01

    Highlights: • Cycled carbide slag from calcium looping cycles is used to remove HCl. • The optimum temperature for HCl removal of cycled carbide slag is 700 °C. • The presence of CO 2 restrains HCl removal of cycled carbide slag. • CO 2 capture conditions have important effects on HCl removal of cycled carbide slag. • HCl removal capacity of carbide slag drops with cycle number rising from 1 to 50. - Abstract: The carbide slag is an industrial waste from chlor-alkali plants, which can be used to capture CO 2 in the calcium looping cycles, i.e. carbonation/calcination cycles. In this work, the cycled carbide slag from the calcium looping cycles for CO 2 capture was proposed to remove HCl in the flue gas from the biomass-fired and RDFs-fired boilers. The effects of chlorination temperature, HCl concentration, particle size, presence of CO 2 , presence of O 2 , cycle number and CO 2 capture conditions in calcium looping cycles on the HCl removal behavior of the carbide slag experienced carbonation/calcination cycles were investigated in a triple fixed-bed reactor. The chlorination product of the cycled carbide slag from the calcium looping after absorbing HCl is not CaCl 2 but CaClOH. The optimum temperature for HCl removal of the cycled carbide slag from the carbonation/calcination cycles is 700 °C. The chlorination conversion of the cycled carbide slag increases with increasing the HCl concentration. The cycled carbide slag with larger particle size exhibits a lower chlorination conversion. The presence of CO 2 decreases the chlorination conversions of the cycled carbide slag and the presence of O 2 has a trifling impact. The chlorination conversion of the carbide slag experienced 1 carbonation/calcination cycle is higher than that of the uncycled calcined sorbent. As the number of carbonation/calcination cycles increases from 1 to 50, the chlorination conversion of carbide slag drops gradually. The high calcination temperature and high CO 2

  2. The urea cycle disorders.

    Science.gov (United States)

    Helman, Guy; Pacheco-Colón, Ileana; Gropman, Andrea L

    2014-07-01

    The urea cycle is the primary nitrogen-disposal pathway in humans. It requires the coordinated function of six enzymes and two mitochondrial transporters to catalyze the conversion of a molecule of ammonia, the α-nitrogen of aspartate, and bicarbonate into urea. Whereas ammonia is toxic, urea is relatively inert, soluble in water, and readily excreted by the kidney in the urine. Accumulation of ammonia and other toxic intermediates of the cycle lead to predominantly neurologic sequelae. The disorders may present at any age from the neonatal period to adulthood, with the more severely affected patients presenting earlier in life. Patients are at risk for metabolic decompensation throughout life, often triggered by illness, fasting, surgery and postoperative states, peripartum, stress, and increased exogenous protein load. Here the authors address neurologic presentations of ornithine transcarbamylase deficiency in detail, the most common of the urea cycle disorders, neuropathology, neurophysiology, and our studies in neuroimaging. Special attention to late-onset presentations is given. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

  3. International Business Cycle

    Directory of Open Access Journals (Sweden)

    Marek Lubiński

    2007-04-01

    Full Text Available Prime stylized facts of international business cycle theory refer to positive correlation in the cyclical components of important macroeconomic variables across countries. However a number of indicators of business cycle synchronization do not point to clear trends. It can be ascribed to the fact that different forces influence level of business cycle correlation. When investigating into the forces behind the commonness in aggregate fluctuations economic research seems to have pointed in two directions. One strand of the literature examines the idea of common exogenous shocks that affect economies simultaneously. In addition to that economic interdependencies such as trade in goods and services or capital account transactions may serve as the channels through which disturbances spill over across countries.The observed degree of output co movement reflects both the nature of the shocks that have occurred and the degree of economic interdependence. In the periods when common shocks prevail level of synchronization is usually higher than in times of transmission dominance.

  4. Closing the fuel cycle

    International Nuclear Information System (INIS)

    Aycoberry, C.; Rougeau, J.P.

    1987-01-01

    The progressive implementation of some key nuclear fuel cycle capecities in a country corresponds to a strategy for the acquisition of an independant energy source, France, Japan, and some European countries are engaged in such strategic programs. In France, COGEMA, the nuclear fuel company, has now completed the industrial demonstration of the closed fuel cycle. Its experience covers every step of the front-end and of the back-end: transportation of spent fuels, storage, reprocessing, wastes conditioning. The La Hague reprocessing plant smooth operation, as well as the large investment program under active progress can testify of full mastering of this industry. Together with other French and European companies, COGEMA is engaged in the recycling industry, both for uranium through conversion of uranyl nitrate for its further reeichment, and for plutonium through MOX fuel fabrication. Reprocessing and recycling offer the optimum solution for a complete, economic, safe and future-oriented fuel cycle, hence contributing to the necessary development of nuclear energy. (author)

  5. The Contemporary Carbon Cycle

    Science.gov (United States)

    Houghton, R. A.

    2003-12-01

    The global carbon cycle refers to the exchanges of carbon within and between four major reservoirs: the atmosphere, the oceans, land, and fossil fuels. Carbon may be transferred from one reservoir to another in seconds (e.g., the fixation of atmospheric CO2 into sugar through photosynthesis) or over millennia (e.g., the accumulation of fossil carbon (coal, oil, gas) through deposition and diagenesis of organic matter). This chapter emphasizes the exchanges that are important over years to decades and includes those occurring over the scale of months to a few centuries. The focus will be on the years 1980-2000 but our considerations will broadly include the years ˜1850-2100. Chapter 8.09, deals with longer-term processes that involve rates of carbon exchange that are small on an annual timescale (weathering, vulcanism, sedimentation, and diagenesis).The carbon cycle is important for at least three reasons. First, carbon forms the structure of all life on the planet, making up ˜50% of the dry weight of living things. Second, the cycling of carbon approximates the flows of energy around the Earth, the metabolism of natural, human, and industrial systems. Plants transform radiant energy into chemical energy in the form of sugars, starches, and other forms of organic matter; this energy, whether in living organisms or dead organic matter, supports food chains in natural ecosystems as well as human ecosystems, not the least of which are industrial societies habituated (addicted?) to fossil forms of energy for heating, transportation, and generation of electricity. The increased use of fossil fuels has led to a third reason for interest in the carbon cycle. Carbon, in the form of carbon dioxide (CO2) and methane (CH4), forms two of the most important greenhouse gases. These gases contribute to a natural greenhouse effect that has kept the planet warm enough to evolve and support life (without the greenhouse effect the Earth's average temperature would be -33

  6. How well can business cycle accounting account for business cycles?

    OpenAIRE

    Keisuke Otsu

    2012-01-01

    The business cycle accounting method introduced by Chari, Kehoe and McGrattan (2007) is a useful tool to decompose business cycle fluctuations into their contributing factors. However, the model estimated by the maximum likelihood method cannot replicate business cycle moments computed from data. Moment-based estimation might be an attractive alternative if the purpose of the research is to study business cycle properties such as volatility, persistence and cross-correlation of variables inst...

  7. Nuclear fuel cycle system analysis

    International Nuclear Information System (INIS)

    Ko, W. I.; Kwon, E. H.; Kim, S. G.; Park, B. H.; Song, K. C.; Song, D. Y.; Lee, H. H.; Chang, H. L.; Jeong, C. J.

    2012-04-01

    The nuclear fuel cycle system analysis method has been designed and established for an integrated nuclear fuel cycle system assessment by analyzing various methodologies. The economics, PR(Proliferation Resistance) and environmental impact evaluation of the fuel cycle system were performed using improved DB, and finally the best fuel cycle option which is applicable in Korea was derived. In addition, this research is helped to increase the national credibility and transparency for PR with developing and fulfilling PR enhancement program. The detailed contents of the work are as follows: 1)Establish and improve the DB for nuclear fuel cycle system analysis 2)Development of the analysis model for nuclear fuel cycle 3)Preliminary study for nuclear fuel cycle analysis 4)Development of overall evaluation model of nuclear fuel cycle system 5)Overall evaluation of nuclear fuel cycle system 6)Evaluate the PR for nuclear fuel cycle system and derive the enhancement method 7)Derive and fulfill of nuclear transparency enhancement method The optimum fuel cycle option which is economical and applicable to domestic situation was derived in this research. It would be a basis for establishment of the long-term strategy for nuclear fuel cycle. This work contributes for guaranteeing the technical, economical validity of the optimal fuel cycle option. Deriving and fulfillment of the method for enhancing nuclear transparency will also contribute to renewing the ROK-U.S Atomic Energy Agreement in 2014

  8. Alternative ORC bottoming cycles FOR combined cycle power plants

    International Nuclear Information System (INIS)

    Chacartegui, R.; Sanchez, D.; Munoz, J.M.; Sanchez, T.

    2009-01-01

    In this work, low temperature Organic Rankine Cycles are studied as bottoming cycle in medium and large scale combined cycle power plants. The analysis aims to show the interest of using these alternative cycles with high efficiency heavy duty gas turbines, for example recuperative gas turbines with lower gas turbine exhaust temperatures than in conventional combined cycle gas turbines. The following organic fluids have been considered: R113, R245, isobutene, toluene, cyclohexane and isopentane. Competitive results have been obtained for toluene and cyclohexane ORC combined cycles, with reasonably high global efficiencies. The paper is structured in four main parts. A review of combined cycle and ORC cycle technologies is presented, followed by a thermodynamic analysis of combined cycles with commercial gas turbines and ORC low temperature bottoming cycles. Then, a parametric optimization of an ORC combined cycle plant is performed in order to achieve a better integration between these two technologies. Finally, some economic considerations related to the use of ORC in combined cycles are discussed.

  9. GEOSS Water Cycle Integrator

    Science.gov (United States)

    Koike, Toshio; Lawford, Richard; Cripe, Douglas

    2013-04-01

    It is critically important to recognize and co-manage the fundamental linkages across the water-dependent domains; land use, including deforestation; ecosystem services; and food-, energy- and health-securities. Sharing coordinated, comprehensive and sustained observations and information for sound decision-making is a first step; however, to take full advantage of these opportunities, we need to develop an effective collaboration mechanism for working together across different disciplines, sectors and agencies, and thereby gain a holistic view of the continuity between environmentally sustainable development, climate change adaptation and enhanced resilience. To promote effective multi-sectoral, interdisciplinary collaboration based on coordinated and integrated efforts, the intergovernmental Group on Earth Observations (GEO) is implementing the Global Earth Observation System of Systems (GEOSS). A component of GEOSS now under development is the "GEOSS Water Cycle Integrator (WCI)", which integrates Earth observations, modeling, data and information, management systems and education systems. GEOSS/WCI sets up "work benches" by which partners can share data, information and applications in an interoperable way, exchange knowledge and experiences, deepen mutual understanding and work together effectively to ultimately respond to issues of both mitigation and adaptation. (A work bench is a virtual geographical or phenomenological space where experts and managers collaborate to use information to address a problem within that space). GEOSS/WCI enhances the coordination of efforts to strengthen individual, institutional and infrastructure capacities, especially for effective interdisciplinary coordination and integration. GEO has established the GEOSS Asian Water Cycle Initiative (AWCI) and GEOSS African Water Cycle Coordination Initiative (AfWCCI). Through regional, inter-disciplinary, multi-sectoral integration and inter-agency coordination in Asia and Africa, GEOSS

  10. Mole sieve cycle optimization

    Energy Technology Data Exchange (ETDEWEB)

    Croteau, P. [Petro-Canada Oil and Gas, Inc., Calgary, AB (Canada)

    2004-07-01

    Maturing gas basins and declining reservoirs have prompted the search for energy and cost reduction initiatives to maintain operation sustainability. This paper discusses the development of an algorithm to improve the efficiency of the Brazeau mole sieve dehydration system. Details of the operating unit and an outline of the system were provided, as well as an operator interface. The main objectives of the research were to reduce the number of corresponding regeneration cycles; reduce annual energy requirements; and extend the life of the dessicant. Reductions were anticipated at 35 per cent, leading towards fuel savings of $45,000 a year, and carbon dioxide reductions of 670 tonnes a year. However, significant barriers were also noted, including operations, maintenance and equipment replacement issues. Equations of state were used to estimate vapor pressure or water content in gases. Approximate water content was measured with gas flow rate. The resulting algorithm was implemented using a basic best fit curve generated for one variable with a correction factor applied as a second variable. Data books were provided to present water content of hydrocarbon gas, with implementation procedures. Benefits of the new system included longer service life and reduced chemical and outside service costs, and reduced lost production during sieve changes. Additional benefits included enhanced distributed computing system (DCS) interfaces within plant operations; extension of the adsorption cycle via the functionality of the algorithm; and the fact that during a plant upset, the algorithm froze cycle sequencing and eliminated the possibility of switching the beds and repeating regeneration. The improved system resulted in savings of $87,000. tabs, figs.

  11. The Life Cycle of Centrioles

    OpenAIRE

    Hatch, E.; Stearns, T.

    2010-01-01

    Centrioles organize the centrosome and nucleate the ciliary axoneme, and the centriole life cycle has many parallels to the chromosome cycle. The centriole cycle in animals begins at fertilization with the contribution of two centrioles by the male gamete. In the ensuing cell cycles, the duplication of centrioles is controlled temporally, spatially, and numerically. As a consequence of the duplication mechanism, the two centrioles in a typical interphase cell are of different ages and have di...

  12. DETECTING ALIEN LIMIT CYCLES NEAR A HAMILTONIAN 2-SADDLE CYCLE

    OpenAIRE

    LUCA, Stijn; DUMORTIER, Freddy; Caubergh, M.; Roussarie, R.

    2009-01-01

    This paper aims at providing and example of a cubic Hamiltonian 2-saddle cycle that after bifurcation can give rise to an alien limit cycle; this is a limit cycle that is not controlled by a zero of the related Abelian integral. To guarantee the existence of an alien limit cycle one can verify generic conditions on the Abelian integral and on the transition map associated to the connections of the 2-saddle cycle. In this paper, a general method is developed to compute the first and second der...

  13. Optimum gas turbine cycle for combined cycle power plant

    International Nuclear Information System (INIS)

    Polyzakis, A.L.; Koroneos, C.; Xydis, G.

    2008-01-01

    The gas turbine based power plant is characterized by its relatively low capital cost compared with the steam power plant. It has environmental advantages and short construction lead time. However, conventional industrial engines have lower efficiencies, especially at part load. One of the technologies adopted nowadays for efficiency improvement is the 'combined cycle'. The combined cycle technology is now well established and offers superior efficiency to any of the competing gas turbine based systems that are likely to be available in the medium term for large scale power generation applications. This paper has as objective the optimization of a combined cycle power plant describing and comparing four different gas turbine cycles: simple cycle, intercooled cycle, reheated cycle and intercooled and reheated cycle. The proposed combined cycle plant would produce 300 MW of power (200 MW from the gas turbine and 100 MW from the steam turbine). The results showed that the reheated gas turbine is the most desirable overall, mainly because of its high turbine exhaust gas temperature and resulting high thermal efficiency of the bottoming steam cycle. The optimal gas turbine (GT) cycle will lead to a more efficient combined cycle power plant (CCPP), and this will result in great savings. The initial approach adopted is to investigate independently the four theoretically possible configurations of the gas plant. On the basis of combining these with a single pressure Rankine cycle, the optimum gas scheme is found. Once the gas turbine is selected, the next step is to investigate the impact of the steam cycle design and parameters on the overall performance of the plant, in order to choose the combined cycle offering the best fit with the objectives of the work as depicted above. Each alterative cycle was studied, aiming to find the best option from the standpoint of overall efficiency, installation and operational costs, maintainability and reliability for a combined power

  14. The nuclear fuel cycle

    International Nuclear Information System (INIS)

    1998-05-01

    After a short introduction about nuclear power in the world, fission physics and the French nuclear power plants, this brochure describes in a digest way the different steps of the nuclear fuel cycle: uranium prospecting, mining activity, processing of uranium ores and production of uranium concentrates (yellow cake), uranium chemistry (conversion of the yellow cake into uranium hexafluoride), fabrication of nuclear fuels, use of fuels, reprocessing of spent fuels (uranium, plutonium and fission products), recycling of energetic materials, and storage of radioactive wastes. (J.S.)

  15. Liquid air cycle engines

    Science.gov (United States)

    Rosevear, Jerry

    1992-01-01

    Given here is a definition of Liquid Air Cycle Engines (LACE) and existing relevant technologies. Heat exchanger design and fabrication techniques, the handling of liquid hydrogen to achieve the greatest heat sink capabilities, and air decontamination to prevent heat exchanger fouling are discussed. It was concluded that technology needs to be extended in the areas of design and fabrication of heat exchangers to improve reliability along with weight and volume reductions. Catalysts need to be improved so that conversion can be achieved with lower quantities and lower volumes. Packaging studies need to be investigated both analytically and experimentally. Recycling with slush hydrogen needs further evaluation with experimental testing.

  16. Cycle 7 outage experience

    International Nuclear Information System (INIS)

    Gadeken, A.D.

    1986-03-01

    The scheduled 58-day refueling outage in preparation for the seventh operating cycle of the Fast Flux Test Facility (FFTF) was successfully completed three days ahead of schedule. The planning and execution of the outage was greatly aided by Project/2 automated scheduling capabilities. For example, the use of ''maintenance windows'' and resource loading capabilities was particularly effective. The value of the planning process was demonstrated by the smooth transition into the outage phase after an early shutdown and set the stage for our best outage to date

  17. Nuclear Fuel Cycle Objectives

    International Nuclear Information System (INIS)

    2013-01-01

    . The four Objectives publications include Nuclear General Objectives, Nuclear Power Objectives, Nuclear Fuel Cycle Objectives, and Radioactive Waste management and Decommissioning Objectives. This publication sets out the objectives that need to be achieved in the area of the nuclear fuel cycle to ensure that the Nuclear Energy Basic Principles are satisfied. Within each of these four Objectives publications, the individual topics that make up each area are addressed. The five topics included in this publication are: resources; fuel engineering and performance; spent fuel management and reprocessing; fuel cycles; and the research reactor nuclear fuel cycle

  18. The software life cycle

    CERN Document Server

    Ince, Darrel

    1990-01-01

    The Software Life Cycle deals with the software lifecycle, that is, what exactly happens when software is developed. Topics covered include aspects of software engineering, structured techniques of software development, and software project management. The use of mathematics to design and develop computer systems is also discussed. This book is comprised of 20 chapters divided into four sections and begins with an overview of software engineering and software development, paying particular attention to the birth of software engineering and the introduction of formal methods of software develop

  19. Closing the fuel cycle

    International Nuclear Information System (INIS)

    Wolfe, B.; Judson, B.F.

    1984-01-01

    The possibilities for closing the fuel cycle in today's nuclear climate in the US are compared with those envisioned in 1977. Reprocessing, the fast breeder reactor program, and the uranium supply are discussed. The conclusion drawn is that the nuclear world is less healthy and less stable than the one previously envisioned and that the major task before the international nuclear community is to develop technologies, institutions, and accepted procedures that will allow to economically provide the huge store of energy from reprocessing and the breeder that it appears the world will desperately need

  20. Entrepreneurship and the Business Cycle

    NARCIS (Netherlands)

    Ph.D. Koellinger (Philipp); A.R. Thurik (Roy)

    2011-01-01

    textabstractWe find new empirical regularities in the business cycle in a cross-country panel of 22 OECD countries for the period 1972-2007; entrepreneurship Granger-causes the cycles of the world economy. Furthermore, the entrepreneurial cycle is positively affected by the national unemployment

  1. Sometimes "Newton's Method" Always "Cycles"

    Science.gov (United States)

    Latulippe, Joe; Switkes, Jennifer

    2012-01-01

    Are there functions for which Newton's method cycles for all non-trivial initial guesses? We construct and solve a differential equation whose solution is a real-valued function that two-cycles under Newton iteration. Higher-order cycles of Newton's method iterates are explored in the complex plane using complex powers of "x." We find a class of…

  2. Culture in cycles: considering H.T. Odum's 'information cycle'

    Science.gov (United States)

    Abel, Thomas

    2014-01-01

    'Culture' remains a conundrum in anthropology. When recast in the mold of 'information cycles,' culture is transformed. New fault lines appear. Information is splintered into parallel or nested forms. Dynamics becomes cycling. Energy is essential. And culture has function in a directional universe. The 'information cycle' is the crowning component of H.T. Odum's theory of general systems. What follows is an application of the information cycle to the cultural domains of discourse, social media, ritual, education, journalism, technology, academia, and law, which were never attempted by Odum. In information cycles, cultural information is perpetuated - maintained against Second Law depreciation. Conclusions are that culture is in fact a nested hierarchy of cultural forms. Each scale of information production is semi-autonomous, with its own evolutionary dynamics of production and selection in an information cycle. Simultaneously, each information cycle is channeled or entrained by its larger scale of information and ultimately human-ecosystem structuring.

  3. The centriole duplication cycle

    Science.gov (United States)

    Fırat-Karalar, Elif Nur; Stearns, Tim

    2014-01-01

    Centrosomes are the main microtubule-organizing centre of animal cells and are important for many critical cellular and developmental processes from cell polarization to cell division. At the core of the centrosome are centrioles, which recruit pericentriolar material to form the centrosome and act as basal bodies to nucleate formation of cilia and flagella. Defects in centriole structure, function and number are associated with a variety of human diseases, including cancer, brain diseases and ciliopathies. In this review, we discuss recent advances in our understanding of how new centrioles are assembled and how centriole number is controlled. We propose a general model for centriole duplication control in which cooperative binding of duplication factors defines a centriole ‘origin of duplication’ that initiates duplication, and passage through mitosis effects changes that license the centriole for a new round of duplication in the next cell cycle. We also focus on variations on the general theme in which many centrioles are created in a single cell cycle, including the specialized structures associated with these variations, the deuterosome in animal cells and the blepharoplast in lower plant cells. PMID:25047614

  4. The sunspot cycle revisited

    International Nuclear Information System (INIS)

    Lomb, Nick

    2013-01-01

    The set of sunspot numbers observed since the invention of the telescope is one of the most studied time series in astronomy and yet it is also one of the most complex. Fourteen frequencies are found in the yearly mean sunspot numbers from 1700 to 2011using the Lomb-Scargle periodogram and prewhitening. All of the frequencies corresponding to shorter term periods can be matched with simple algebraic combinations of the frequency of the main 11-year period and the frequencies of the longer term periods in the periodogram. This is exactly what can be expected from amplitude and phase modulation of an 11.12-year periodicity by longer term variations. Similar, though not identical, results are obtained after correcting the sunspot number series as proposed by Svalgaard. On looking separately at the amplitude and phase modulation a clear relationship is found between the two modulations although this relationship has broken down for the last four solar cycles. The phase modulation implies that there is a definite underlying period for the solar cycle. Such a clock mechanism does seem to be a possibility in models of the solar dynamo incorporating a conveyor-belt-like meridional circulation between high polar latitudes and the equator.

  5. Reference thorium fuel cycle

    International Nuclear Information System (INIS)

    Driggers, F.E.

    1978-08-01

    In the reference fuel cycle for the TFCT program, fissile U will be denatured by mixing with 238 U; the plants will be located in secure areas, with Pu being recycled within these secure areas; Th will be recycled with recovered U and Pu; the head end will handle a variety of core and blanket fuel assembly designs for LWRs and HWRs; the fuel may be a homogeneous mixture either of U and Th oxide pellets or sol-gel microspheres; the cladding will be Zircaloy; and MgO may be added to the fuel to improve Th dissolution. Th is being considered as the fertile component of fuel in order to increase proliferation resistance. Spent U recovered from Th-based fuels must be re-enriched before recycle to prevent very rapid buildup of 238 U. Stainless steel will be considered as a backup to Zircaloy cladding in case Zr is incompatible with commercial aqueous dissolution. Storage of recovered irradiated Th will be considered as a backup to its use in the recycle of recovered Pu and U. Estimates are made of the time for introducing the Th fuel cycle into the LWR power industry. Since U fuel exposures in LWRs are likely to increase from 30,000 to 50,000 MWD/MT, the Th reprocessing plant should also be designed for Th fuel with 50,000 MWD/MT exposure

  6. Fast breeder fuel cycle

    International Nuclear Information System (INIS)

    1978-07-01

    This contribution is prepared for the answer to the questionnaire of working group 5, subgroup B. B.1. is the short review of the fast breeder fuel cycles based on the reference large commercial Japanese LMFBR. The LMFBRs are devided into two types. FBR-A is the reactor to be used before 2000, and its burnup and breeding ratio are relatively low. The reference fuel cycle requirement is calculated based on the FBR-A. FBR-B is the one to be used after 2000, and its burnup and breeding ratio are relatively high. B.2. is basic FBR fuel reprocessing scheme emphasizing the differences with LWR reprocessing. This scheme is based on the conceptual design and research and development work on the small scale LMFBR reprocessing facility of Japan. The facility adopts a conventional PUREX process except head end portions. The report also describes the effects of technical modifications of conventional reprocessing flow sheets, and the problems to be solved before the adoption of these alternatives

  7. Changing global carbon cycle

    International Nuclear Information System (INIS)

    Canadell, Pep

    2007-01-01

    Full text: The increase in atmospheric carbon dioxide (C02) is the single largest human perturbation on the earth's radiative balance contributing to climate change. Its rate of change reflects the balance between anthropogenic carbon emissions and the dynamics of a number of terrestrial and ocean processes that remove or emit C02. It is the long term evolution of this balance that will determine to large extent the speed and magnitude of the human induced climate change and the mitigation requirements to stabilise atmospheric C02 concentrations at any given level. In this talk, we show new trends in global carbon sources and sinks, with particularly focus on major shifts occurring since 2000 when the growth rate of atmospheric C02 has reached its highest level on record. The acceleration in the C02 growth results from the combination of several changes in properties of the carbon cycle, including: acceleration of anthropogenic carbon emissions; increased carbon intensity of the global economy, and decreased efficiency of natural carbon sinks. We discuss in more detail some of the possible causes of the reduced efficiency of natural carbon sinks on land and oceans, such as the decreased net sink in the Southern Ocean and on terrestrial mid-latitudes due to world-wide occurrence of drought. All these changes reported here characterise a carbon cycle that is generating stronger than expected climate forcing, and sooner than expected

  8. Part 5. Fuel cycle options

    International Nuclear Information System (INIS)

    Lineberry, M.J.; McFarlane, H.F.; Amundson, P.I.; Goin, R.W.; Webster, D.S.

    1980-01-01

    The results of the FBR fuel cycle study that supported US contributions to the INFCE are presented. Fuel cycle technology is reviewed from both generic and historical standpoints. Technology requirements are developed within the framework of three deployment scenarios: the reference international, the secured area, and the integral cycle. Reprocessing, fabrication, waste handling, transportation, and safeguards are discussed for each deployment scenario. Fuel cycle modifications designed to increase proliferation defenses are described and assessed for effectiveness and technology feasibility. The present status of fuel cycle technology is reviewed and key issues that require resolution are identified

  9. Ammonia-water Rankine cycle

    International Nuclear Information System (INIS)

    Bo Hanliang; Ma Changwen; Wu Shaorong

    1997-01-01

    On characteristics of heating source and cooling source in nuclear heating reactor cooperation, the authors advance a new kind of power cycle in which a multicomponent mixture as the work fluid, ammonia-water Rankine cycle, describe its running principle, and compare it with steam Rankine cycle in the same situation. The result is that: the new kind of power cycle, ammonia-water Rankine cycle has higher electricity efficiency; it suits for the situation of heating source and cooling source which offered by nuclear heating reactor cooperation. For low temperature heating source, it maybe has a widely application

  10. Cycling infrastructure for reducing cycling injuries in cyclists.

    Science.gov (United States)

    Mulvaney, Caroline A; Smith, Sherie; Watson, Michael C; Parkin, John; Coupland, Carol; Miller, Philip; Kendrick, Denise; McClintock, Hugh

    2015-12-10

    Cycling is an attractive form of transport. It is beneficial to the individual as a form of physical activity that may fit more readily into an individual's daily routine, such as for cycling to work and to the shops, than other physical activities such as visiting a gym. Cycling is also beneficial to the wider community and the environment as a result of fewer motorised journeys. Cyclists are seen as vulnerable road users who are frequently in close proximity to larger and faster motorised vehicles. Cycling infrastructure aims to make cycling both more convenient and safer for cyclists. This review is needed to guide transport planning. To:1. evaluate the effects of different types of cycling infrastructure on reducing cycling injuries in cyclists, by type of infrastructure;2. evaluate the effects of cycling infrastructure on reducing the severity of cycling injuries in cyclists;3. evaluate the effects of cycling infrastructure on reducing cycling injuries in cyclists with respect to age, sex and social group. We ran the most recent search on 2nd March 2015. We searched the Cochrane Injuries Group Specialised Register, CENTRAL (The Cochrane Library), MEDLINE (OvidSP), Embase Classic + Embase(OvidSP), PubMed and 10 other databases. We searched websites, handsearched conference proceedings, screened reference lists of included studies and previously published reviews and contacted relevant organisations. We included randomised controlled trials, cluster randomised controlled trials, controlled before-after studies, and interrupted time series studies which evaluated the effect of cycling infrastructure (such as cycle lanes, tracks or paths, speed management, roundabout design) on cyclist injury or collision rates. Studies had to include a comparator, that is, either no infrastructure or a different type of infrastructure. We excluded studies that assessed collisions that occurred as a result of competitive cycling. Two review authors examined the titles and

  11. LIFE CYCLE OF INFORMATION SYSTEMS

    Directory of Open Access Journals (Sweden)

    Y. S. Sennik

    2015-01-01

    Full Text Available This work is a generalization of the theoretical propositions related to the life cycle of information systems. There was given the definition of the life cycle, specify which items you should include every step of the cycle. Describes the methodology division of the life cycle on the main stage, including methodology Rational Unified Process. The description of the fundamental standards in this area. Special attention was paid to the work of the basic life cycle models. It was carried out their comparative characteristics. On the basis of the theoretical propositions, it was concluded that the preferred model of the life cycle for the corporate network is a spiral model and the use of international standards in the life cycle saves a lot of effort, time and material resources.

  12. The supercontinent cycle

    Energy Technology Data Exchange (ETDEWEB)

    Nance, R.D.; Worsley, T.R.; Moody, J.B.

    1988-07-01

    This paper discusses a new theory of plate tectonics which proposes that Pangaea was only the most recent in a series of supercontinents that have been breaking up and reassembling every 500 million years or so. The cycle, driven by heat percolating up from the mantle, splits continents and drives interrelated processes that shape the earth's geology and climate and play a role in biological evolution. The framework of the supercontinent theory makes it possible to understand the timing of changes in sea level that have taken place in the past 570 million years, and also helps to explain periods of intense mountain building, episodes of glaciation, and changes in the nature of life on the earth.

  13. The nuclear power cycle

    International Nuclear Information System (INIS)

    2004-01-01

    Fifty years after the first nuclear reactor come on-line, nuclear power is fourth among the world's primary energy sources, after oil, coal and gas. In 2002, there were 441 reactors in operation worldwide. The United States led the world with 104 reactors and an installed capacity of 100,000 MWe, or more than one fourth of global capacity. Electricity from nuclear energy represents 78% of the production in France, 57% in Belgium, 46% in Sweden, 40% in Switzerland, 39% in South Korea, 34% in Japan, 30% in Germany, 30% in Finland, 26% in Spain, 22% in Great Britain, 20% in the United States and 16% in Russia. Worldwide, 32 reactors are under construction, including 21 in Asia. This information document presents the Areva activities in the nuclear power cycle: the nuclear fuel, the nuclear reactors, the spent fuel reprocessing and recycling and nuclear cleanup and dismantling. (A.L.B.)

  14. CANDU advanced fuel cycles

    International Nuclear Information System (INIS)

    Slater, J.B.

    1986-03-01

    This report is based on informal lectures and presentations made on CANDU Advanced Fuel Cycles over the past year or so, and discusses the future role of CANDU in the changing environment for the Canadian and international nuclear power industry. The changing perspectives of the past decade lead to the conclusion that a significant future market for a CANDU advanced thermal reactor will exist for many decades. Such a reactor could operate in a stand-alone strategy or integrate with a mixed CANDU-LWR or CANDU-FBR strategy. The consistent design focus of CANDU on enhanced efficiency of resource utilization combined with a simple technology to achieve economic targets, will provide sufficient flexibility to maintain CANDU as a viable power producer for both the medium- and long-term future

  15. Open cycle thermoacoustics

    Energy Technology Data Exchange (ETDEWEB)

    Reid, Robert Stowers [Georgia Inst. of Technology, Atlanta, GA (United States)

    2000-01-01

    A new type of thermodynamic device combining a thermodynamic cycle with the externally applied steady flow of an open thermodynamic process is discussed and experimentally demonstrated. The gas flowing through this device can be heated or cooled in a series of semi-open cyclic steps. The combination of open and cyclic flows makes possible the elimination of some or all of the heat exchangers (with their associated irreversibility). Heat is directly exchanged with the process fluid as it flows through the device when operating as a refrigerator, producing a staging effect that tends to increase First Law thermodynamic efficiency. An open-flow thermoacoustic refrigerator was built to demonstrate this concept. Several approaches are presented that describe the physical characteristics of this device. Tests have been conducted on this refrigerator with good agreement with a proposed theory.

  16. The planning cycle.

    Science.gov (United States)

    Johnson, William

    2005-01-01

    Information technology planning can be described as a continuous cyclical process composed of three phases whose primary purpose is optimum allocation of scarce resources. In the assessment phase, planners assess user needs, environmental factors, business objectives, and IT infrastructure needs to develop IT projects that address needs in each of these areas. A major goal of this phase is to develop a broad IT inventory. The prioritization phase seeks to ensure optimum allocation of scarce resources by prioritizing ITprojects based on: Costs--total life cycle costs. Benefits--both quantitative and non-quantitative, including support for the organization's strategic business objectives. Risks--subjective assessments of technological and non-technological risks. Implementation requirements--time and personnel requirements to implement the system. The scheduling phase incorporates sequencing considerations, personnel availability, and budgetary constraints to produce an IT plan in which project priorities are adjusted to meet organizational realities.

  17. Variable cycle engine

    Energy Technology Data Exchange (ETDEWEB)

    Adamson, A.P.; Sprunger, E.V.

    1980-09-16

    A variable cycle turboshaft engine includes a remote fan system and respective high and low pressure systems for selectively driving the fan system in such a manner as to provide VTOL takeoff capability and minimum specific fuel consumption (SFC) at cruise and loiter conditions. For takeoff the fan system is primarily driven by the relatively large low pressure system whose combustor receives the motive fluid from a core bypass duct and, for cruise and loiter conditions, the fan system is driven by both a relatively small high pressure core and the low pressure system with its combustor inoperative. A mixer is disposed downstream of the high pressure system for mixing the relatively cold air from the bypass duct and the relatively hot air from the core prior to its flow to the low pressure turbine.

  18. HTGR fuel cycle

    International Nuclear Information System (INIS)

    1987-08-01

    In the spring of 1987, the HTGR fuel cycle project has been existing for ten years, and for this reason a status seminar has been held on May 12, 1987 in the Juelich Nuclear Research Center, that gathered the participants in this project for a discussion on the state of the art in HTGR fuel element development, graphite development, and waste management. The papers present an overview of work performed so far and an outlook on future tasks and goals, and on taking stock one can say that the project has been very successful so far: The HTGR fuel element now available meets highest requirements and forms the basis of today's HTGR safety philosophy; research work on graphite behaviour in a high-temperature reactor has led to complete knowledge of the temperature or neutron-induced effects, and with the concept of direct ultimate waste disposal, the waste management problem has found a feasible solution. (orig./GL) [de

  19. The uranium cycle

    International Nuclear Information System (INIS)

    Ferguson, J.

    1988-01-01

    In identifying uranium provinces, and, more importantly, mineralized zones within these provinces, it is of paramount importance to attempt to trace the geochemical behaviour of an element through all stages of Earth's evolution. Aspects that need to be addressed in this regard include solar abundance levels and fractionation processes during accretion, changing patterns of crustal evolution, effects of an evolving atmosphere, and the weathering cycle. Abundance patterns and partition coefficients of some of the siderophile elements in mantle rocks lend support to a multistage accretionary process. Lack of a terrestrial record in the first 500 Ma necessitates that lunar models be invoked, which suggests that early fractionation of a mafic/ultramafic magma resulted in an anorthositic crust. Fractionation of the mantle and transfer of materials to the upper levels must be central to any model invoked for development of the crust. Given high heat flow conditions in the early Archaean it would seem inescapable that the process of sea floor spreading and plate tectonics was an ongoing process. If the plate tectonic model is taken back to 3500 Ma, and assuming current speading rates, then about half of the mantle has passed through the irreversible differentiation cycle. Arguments in support of recycled material must be balanced against mantle metasomatism effects. With the associated advent of partial melting of the mantle material a partitioning of minor and trace elements into the melt fraction would take place. The early primitive mafic and ultramafic komatiites exemplify this feature by concentrating U and Th by a factor of 5 compared to chondritic abundances. It is of tantamount importance to understand the generation of the magmas in order to predict which are the 'fertile' bodies in terms of radioelement concentrations. In that the granitoid magmas image their source compositions, the association of high radioelements will primarily be source-dependent. Uranium

  20. The Hamburg oceanic carbon cycle circulation model. Cycle 1

    International Nuclear Information System (INIS)

    Maier-Reimer, E.; Heinze, C.

    1992-02-01

    The carbon cycle model calculates the prognostic fields of oceanic geochemical carbon cycle tracers making use of a 'frozen' velocity field provided by a run of the LSG oceanic circulation model (see the corresponding manual, LSG=Large Scale Geostrophic). The carbon cycle model includes a crude approximation of interactions between sediment and bottom layer water. A simple (meridionally diffusive) one layer atmosphere model allows to calculate the CO 2 airborne fraction resulting from the oceanic biogeochemical interactions. (orig.)

  1. EFEK PENGGUNAAN ABU GOSOK DAN SERBUK BATA MERAH PADA PEMBUATAN TELUR ASIN TERHADAP KANDUNGAN MIKROBA DALAM TELUR (THE EFFECT OF USING THE ASH AND THE RED BRICK POWDER IN MAKING OF THE SALTED EGGS TO THE MICROBIAL CONTENT OF THE EGGS

    Directory of Open Access Journals (Sweden)

    Heru Yuniati

    2013-07-01

    , garam dapur, dan air dengan perbandingan 4:2:2 ml, sedangkan sepuluh butir telur asin lagi dibuat menggunakan campuran serbuk bata merah, garam dapur, dan air dengan perbandingan 4:2:2. Setelah adonan pengasin tercampur rata, setiap telur dibungkus dengan adonan secara merata dengan ketebalan ±2 mm. Kemudian telur disimpan dalam ember plastik pada ruang terbuka. Pengujian mikroba dilakukan terhadap total bakteri, dan khamir, serta pengujian kandungan  koliform, E. coli dan Salmonella/Shigella pada hari ke- 0, 5, 10, 15, dan 20. Hasil: Total bakteri dan khamir pada ke-2 produk telur asin selama pengasinan terjadi penurunan, kecuali pada penggaraman hari ke-20, di mana terjadi kenaikan total bakteri pada telur asin dengan media abu gosok, tetapi tidak pada telur asin dengan media serbuk bata merah. Di akhir penggaraman, angka total bakteri telur asin sebesar 4 x 102 dan 0,9 x 102 koloni/gram, serta total khamir 0,45 x 102 dan 8,7 x 102 koloni/gram. Kesimpulan: Telur asin yang dibuat dengan menggunakan abu gosok dan serbuk bata merah tidak mengandung bakteri coliform, E. coli dan Salmonella/Shigella, sedangkan jumlah total bakteri dan khamir pada kedua telur ada perbedaan. [Penel Gizi Makan 2011, 34(2: 131-137]   Kata kunci: Telur asin, abu gosok, serbuk bata merah, mikroba.

  2. Creeping of hysteresis cycles; Reptation des cycles d'hysteresis

    Energy Technology Data Exchange (ETDEWEB)

    Neel, L [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Faculte des Sciences de Grenoble, 38 (France)

    1959-07-01

    Creeping consists of a kind of progressive translation of dissymmetric ferromagnetic hysteresis cycles as a function of the order number of the cycle. It is interpreted here by means of a probable coupling field, the existence of which is connected to a statistical conception of the distribution of the elementary regions. (author) [French] La reptation consiste en une sorte de translation progressive des cycles d'hysteresis ferromagnetiques dissymetriques en fonction du numero d'ordre du cycle. L'auteur l'interprete au moyen d'un champ aleatoire de couplage dont l'existence est liee a une conception statistique de la distribution des domaines elementaires. (auteur)

  3. In anticipation of cycle 24

    Science.gov (United States)

    Kunches, Joseph; van der Linden, Ronald; Lundstedt, Henrik

    Anxious eyes are watching for the beginnings of new solar cycle 24. The watchers are many; scientists, engineers, academics, forecasters, end users. Their needs however vary, from the attraction of a better understanding of our nearest star, to how its increase in luminosity will affect particular aspects such as satellite orbits or the strength of the episodic storms that are most likely to occur during the height of the cycle. The first sign, however fleeting, occurred in January, 2008, when an ephemeral new cycle spot was numbered by NOAA as 10981. It was gone quickly but did mark the possible beginning of the new cycle. There has been great debate among solar physicists on how strong cycle 24 will be; and when it will start, reach maximum, and decline. This talk will give the status of the efforts to predict cycle 24, and the most recent projections.

  4. Menstrual cycle pattern and fertility

    DEFF Research Database (Denmark)

    Kolstad, Henrik A.; Bonde, Jens Peter; Hjøllund, Niels Henrik

    1999-01-01

    OBJECTIVE: To characterize how the menstrual cycle pattern relates to fertility regardless of potential biases caused by inappropriate coital timing during the menstrual cycle or early embryonal loss. DESIGN: Prospective follow-up study. SETTING: Healthy couples recruited throughout Denmark....... PATIENT(S): Two hundred ninety-five couples who were planning their first pregnancy were followed up from the discontinuation of birth control until a pregnancy was recognized within six menstrual cycles. Early embryonal losses were detected by changes in urinary hCG levels. INTERVENTION(S): None. MAIN...... OUTCOME MEASURE(S): The probability of pregnancy occurring within one menstrual cycle (fecundity). RESULT(S): In women who had a cycle length that differed by >10 days from the usual cycle length, fecundity was approximately 25% that of women who had no variation (odds ratio 0.25, 95% confidence interval...

  5. The Global Nitrogen Cycle

    Science.gov (United States)

    Galloway, J. N.

    2003-12-01

    Once upon a time nitrogen did not exist. Today it does. In the intervening time the universe was formed, nitrogen was created, the Earth came into existence, and its atmosphere and oceans were formed! In this analysis of the Earth's nitrogen cycle, I start with an overview of these important events relative to nitrogen and then move on to the more traditional analysis of the nitrogen cycle itself and the role of humans in its alteration.The universe is ˜15 Gyr old. Even after its formation, there was still a period when nitrogen did not exist. It took ˜300 thousand years after the big bang for the Universe to cool enough to create atoms; hydrogen and helium formed first. Nitrogen was formed in the stars through the process of nucleosynthesis. When a star's helium mass becomes great enough to reach the necessary pressure and temperature, helium begins to fuse into still heavier elements, including nitrogen.Approximately 10 Gyr elapsed before Earth was formed (˜4.5 Ga (billion years ago)) by the accumulation of pre-assembled materials in a multistage process. Assuming that N2 was the predominate nitrogen species in these materials and given that the temperature of space is -270 °C, N2 was probably a solid when the Earth was formed since its boiling point (b.p.) and melting point (m.p.) are -196 °C and -210 °C, respectively. Towards the end of the accumulation period, temperatures were probably high enough for significant melting of some of the accumulated material. The volcanic gases emitted by the resulting volcanism strongly influenced the surface environment. Nitrogen was converted from a solid to a gas and emitted as N2. Carbon and sulfur were probably emitted as CO and H2S (Holland, 1984). N2 is still the most common nitrogen volcanic gas emitted today at a rate of ˜2 TgN yr-1 (Jaffee, 1992).Once emitted, the gases either remained in the atmosphere or were deposited to the Earth's surface, thus continuing the process of biogeochemical cycling. The rate of

  6. The life cycle of centrioles.

    Science.gov (United States)

    Hatch, E; Stearns, T

    2010-01-01

    Centrioles organize the centrosome and nucleate the ciliary axoneme, and the centriole life cycle has many parallels to the chromosome cycle. The centriole cycle in animals begins at fertilization with the contribution of two centrioles by the male gamete. In the ensuing cell cycles, the duplication of centrioles is controlled temporally, spatially, and numerically. As a consequence of the duplication mechanism, the two centrioles in a typical interphase cell are of different ages and have different functions. Here, we discuss how new centrioles are assembled, what mechanisms limit centriole number, and the consequences of the inherent asymmetry of centriole duplication and segregation.

  7. Reproductive cycles of deer.

    Science.gov (United States)

    Asher, G W

    2011-04-01

    The cervids are a complex assemblage of taxa showing extreme diversity in morphology, physiology, ecology and geographical distribution. Reproductive strategies adopted by various species are also diverse, and include a range from highly seasonal to completely aseasonal birth patterns. The recent growth in knowledge on cervid reproduction is strongly biased towards the larger-bodied, gregarious mixed grazer-browser species that have adapted well to human management and commercialisation. These species tend to represent 'K-selected' climax species characterised by very productive annual breeding success, singleton births and long breeding life (10+ years). Conversely, we know relatively little about the reproductive patterns of the 'r-selected' smaller-bodied, solitary (and often highly territorial), forest-dwelling browser species, often characterised by great fecundity (twinning) and shorter breeding life (<10 years). This group includes many of the endangered cervid taxa. This review extends earlier reviews to include more recent work on cervid reproductive cycles, particularly in relation to environmental factors influencing gestation length. Copyright © 2010 Elsevier B.V. All rights reserved.

  8. The nitrogen cycle.

    Science.gov (United States)

    Stein, Lisa Y; Klotz, Martin G

    2016-02-08

    Nitrogen is the fourth most abundant element in cellular biomass, and it comprises the majority of Earth's atmosphere. The interchange between inert dinitrogen gas (N2) in the extant atmosphere and 'reactive nitrogen' (those nitrogen compounds that support, or are products of, cellular metabolism and growth) is entirely controlled by microbial activities. This was not the case, however, in the primordial atmosphere, when abiotic reactions likely played a significant role in the inter-transformation of nitrogen oxides. Although such abiotic reactions are still important, the extant nitrogen cycle is driven by reductive fixation of dinitrogen and an enzyme inventory that facilitates dinitrogen-producing reactions. Prior to the advent of the Haber-Bosch process (the industrial fixation of N2 into ammonia, NH3) in 1909, nearly all of the reactive nitrogen in the biosphere was generated and recycled by microorganisms. Although the Haber-Bosch process more than quadrupled the productivity of agricultural crops, chemical fertilizers and other anthropogenic sources of fixed nitrogen now far exceed natural contributions, leading to unprecedented environmental degradation. Copyright © 2016 Elsevier Ltd. All rights reserved.

  9. Biomass Gasification Combined Cycle

    Energy Technology Data Exchange (ETDEWEB)

    Judith A. Kieffer

    2000-07-01

    Gasification combined cycle continues to represent an important defining technology area for the forest products industry. The ''Forest Products Gasification Initiative'', organized under the Industry's Agenda 2020 technology vision and supported by the DOE ''Industries of the Future'' program, is well positioned to guide these technologies to commercial success within a five-to ten-year timeframe given supportive federal budgets and public policy. Commercial success will result in significant environmental and renewable energy goals that are shared by the Industry and the Nation. The Battelle/FERCO LIVG technology, which is the technology of choice for the application reported here, remains of high interest due to characteristics that make it well suited for integration with the infrastructure of a pulp production facility. The capital cost, operating economics and long-term demonstration of this technology area key input to future economically sustainable projects and must be verified by the 200 BDT/day demonstration facility currently operating in Burlington, Vermont. The New Bern application that was the initial objective of this project is not currently economically viable and will not be implemented at this time due to several changes at and around the mill which have occurred since the inception of the project in 1995. The analysis shows that for this technology, and likely other gasification technologies as well, the first few installations will require unique circumstances, or supportive public policies, or both to attract host sites and investors.

  10. The earth's hydrological cycle

    CERN Document Server

    Bonnet, R-M; Calisto, M; Destouni, G; Gurney, R; Johannessen, J; Kerr, Y; Lahoz, WA; Rast, M

    2014-01-01

    This book gives a comprehensive presentation of our present understanding of the Earth's Hydrological cycle and the problems, consequences and impacts that go with this topic. Water is a central component in the Earth's system. It is indispensable for life on Earth in its present form and influences virtually every aspect of our planet's life support system. On relatively short time scales, atmospheric water vapor interacts with the atmospheric circulation and is crucial in forming the Earth's climate zones. Water vapor is the most powerful of the greenhouse gases and serves to enhance the tropospheric temperature. The dominant part of available water on Earth resides in the oceans. Parts are locked up in the land ice on Greenland and Antarctica and a smaller part is estimated to exist as groundwater. If all the ice over the land and all the glaciers were to melt, the sea level would rise by some 80 m. In comparison, the total amount of water vapor in the atmosphere is small; it amounts to ~ 25 kg/m2, or the ...

  11. The closed fuel cycle

    International Nuclear Information System (INIS)

    Froment, Antoine; Gillet, Philippe

    2007-01-01

    Available in abstract form only. Full text of publication follows: The fast growth of the world's economy coupled with the need for optimizing use of natural resources, for energy security and for climate change mitigation make energy supply one of the 21. century most daring challenges. The high reliability and efficiency of nuclear energy, its competitiveness in an energy market undergoing a new oil shock are as many factors in favor of the 'renaissance' of this greenhouse gas free energy. Over 160,000 tHM of LWR1 and AGR2 Used Nuclear Fuel (UNF) have already been unloaded from the reactor cores corresponding to 7,000 tons discharged per year worldwide. By 2030, this amount could exceed 400,000 tHM and annual unloading 14,000 tHM/year. AREVA believes that closing the nuclear fuel cycle through the treatment and recycling of Used Nuclear Fuel sustains the worldwide nuclear power expansion. It is an economically sound and environmentally responsible choice, based on the preservation of natural resources through the recycling of used fuel. It furthermore provides a safe and secure management of wastes while significantly minimizing the burden left to future generations. (authors)

  12. Life-cycle cost analysis of adsorption cycles for desalination

    KAUST Repository

    Thu, Kyaw; Chakraborty, A.; Saha, B.B.; Chun, Won Gee; Ng, K.C.

    2010-01-01

    This paper presents the thermo-economic analysis of the adsorption desalination (AD) cycle that is driven by low-temperature waste heat from exhaust of industrial processes or renewable sources. The AD cycle uses an adsorbent such as the silica gel

  13. 'Benefits cycle' replacing premium cycle as consumerism takes hold.

    Science.gov (United States)

    2002-05-01

    The traditional premium cycle of ups and downs in rates is giving way to a new phenomenon--driven by the advent of consumerism in health care--termed the "benefits cycle" by one consultant. Rather than shifts in rates, he argues, the future will see shifts in benefits packages.

  14. KANDUNGAN TSP DAN PM-10 DI UDARA JAKARTA DAN SEKITARNYA

    Directory of Open Access Journals (Sweden)

    Hendro Martono

    2016-09-01

    Full Text Available Abstract. A survey was performed to assess the quality of ambient air in Jakarta, Bogor,Depok,  Tangerang  and Bekasi.  Ambient air samples were collected from 33 sampling points at a distance of 0meter and 120 meters from each main roads respectively. The highest average content of TSP in ambientair at 0 meter was found in West Jakarta (652.02 p.g/cu.m and that of 120 meters from the main road was in Bekasi (445.46µg/cu.m . The highest difference of the TSP content between the two sampling pointswas in Kebon  Jeruk, West Jakarta (96.62 %,  and the lowest one was inCikarang, Bekasi (1.63 %.  Furthermore, the highest difference of the PM-10 content between the two sampling points was inJalan  Raya Bogor, Depok  (96.86 %,  and the lowest one was in Cikarang,  Bekasi (17.26%. In the whole areasof study, the average content of TSP  was 522.44.tg/cu.m  (0 meter, and178.09µg/cu.m (120 meters,  so the difference of the pollutant content between the two sampling points was 65.91%. Meanwhile, theaverage content of PM-10 was 326.25µg/cu.m  (0 meter, and97.09µg/cu.m (120 meters, so the difference of the pollutant content between the two sampling points was 70.24 %. The difference of the means ofboth TSP  and PM-10 content levels between the two sampling sites were significant. The percentages ofsampling points complying withTSP level standard were 9.52 %  (0 meter and 75.76% (120 meters from the road sides. While that of PM-10 were 18.18%  (road side sampling and 78.79% (120 meters from theroad sides.Crusial  measure for controlling theTSP  and PM-10 pollution should also be addressed tomobile sources, such as reducing diesel motorized-vehicles and providing proper mass transportation.

  15. KANDUNGAN LOGAM BERAT DALAM SUMBER AIR MINUM DI DKI JAKARTA

    Directory of Open Access Journals (Sweden)

    Inswiasri Suprijanto

    2012-09-01

    Full Text Available Survey on heavy metal pollution in drinking water was conducted in Jakarta from August to Octo­ber 1986. The purpose of this study was to measure the concentration of heavy metals in drinking water served by the Water Supply Enterprise and private dug wells. Ninety water samples from Water Suply Enterprise and 140 samples from Community dug wells were analysed. The mercury concentration was analysed using the Cold Vapour Technique, while other metals (Cd, Cu, Pb, Zn were analysed using the Air Acetylene Method by Atomic Absorption Spectrophoto­meter (AAS. The concentration of mercury of 30% samples from Water Suply Enterprise and 44% samples from Dug Wells varied from 0.0002- 0.0024 ppm and 0.0002-0.021 ppm respectively. Pb and Cd were undetectable. The concentration of Cu of 21% samples from Water Supply Enterprise and 1 3% samples from Dug Wells were 0.12 ppm and 0.06 ppm. The concentration of Zn of 81% samples from Water Supply Enterprise and 56% from Dug Wells varied from 0.01 -4.97 ppm and 0-01- 5.59 ppm respec­tively.

  16. Jenis dan Kandungan Tanin Pakan Satwa Anoa (Bubalus sp.

    Directory of Open Access Journals (Sweden)

    M. Basri

    2011-04-01

    Full Text Available Study of kinds and tannin content of diets consumed by anoa is limited. This information is very important and necessary for anoa domestication. The aims of this research were to obtain information on kinds and tannin content of anoa diets. The research was conducted in forest of Pangi Binangga nature reserve and Lore Lindu National Park, province of Central Sulawesi in March to November 2009. Digestive content analyses method was used to study the kinds of diets consumed by anoa. Chromatography was used for tannin analysis. Results of the digestive content analysis found ten kinds of anoa diets, i.e. Ficus miquelly, Caryota mitis, Ficus ampelas, Syzigium sp., Cordia mixab, Paspalum conjugatum, Smilax leocophylla, Saccarum spontaneum, Isachne globosa and Imperata cylindrica. The proportion of the diets were 60%, 45%, 35%, 17%, 12%, 10%, 8%, 8%, 5%, and 4%, respectively. Three of six diets namely Ficus miquelly, Saccarum spontaneum and Isachne globosa contained low tannin. The tannin content of three diets was 0.34%, 0.61%, and 0.99%, respectively. It is concluded that anoa in forest prefer diets that contain low tannin, such as Ficus fruits, shoots of shrubs.

  17. Life Cycle Assessment for Biofuels

    Science.gov (United States)

    A presentation based on life cycle assessment (LCA) for biofuels is given. The presentation focuses on energy and biofuels, interesting environmental aspects of biofuels, and how to do a life cycle assessment with some examples related to biofuel systems. The stages of a (biofuel...

  18. Hamiltonian cycles in polyhedral maps

    Indian Academy of Sciences (India)

    We present a necessary and sufficient condition for existence of a contractible, non-separating and non-contractible separating Hamiltonian cycle in the edge graph of polyhedral maps on surfaces.We also present algorithms to construct such cycles whenever it exists where one of them is linear time and another is ...

  19. Emissions from photovoltaic life cycles

    NARCIS (Netherlands)

    Fthenakis, V.M.; Kim, H.C.; Alsema, E.A.|info:eu-repo/dai/nl/073416258

    2008-01-01

    Photovoltaic (PV) technologies have shown remarkable progress recently in terms of annual production capacity and life cycle environmental performances, which necessitate timely updates of environmental indicators. Based on PV production data of 2004–2006, this study presents the life-cycle

  20. Drought and ecosystem carbon cycling

    NARCIS (Netherlands)

    Molen, M.K. van der; Dolman, A.J.; Ciais, P.; Eglin, T.; Gobron, N.; Law, B.E.; Meir, P.; Peters, P.; Philips, O.L.; Reichstein, M.; Chen, T.; Dekker, S.C.; Doubkova, M.; Friedl, M.A.; Jung, M.; Hurk, B.J.J.M. van den; Jeu, R.A.M. de; Kruijt, B.; Ohta, T.; Rebel, K.T.; Plummer, S.; Seneviratne, S.I.; Sitch, S.; Teuling, A.J.; Werf, G.R. van der; Wang, G.

    2011-01-01

    Drought as an intermittent disturbance of the water cycle interacts with the carbon cycle differently than the ‘gradual’ climate change. During drought plants respond physiologically and structurally to prevent excessive water loss according to species-specific water use strategies. This has

  1. Economic growth and business cycles

    NARCIS (Netherlands)

    Canton, E.J.F.

    1997-01-01

    This thesis contains five essays on economic growth and business cycles. The main focus is on the interaction between economic growth and the cycle: is cyclical variability good or bad for the long-run rate of economic growth? The introduction aims to provide some empirical evidence for an

  2. Variations on the Zilch Cycle

    Science.gov (United States)

    Binder, P.-M.; Tanoue, C. K. S.

    2013-01-01

    Thermo dynamic cycles in introductory physics courses are usually made up from a small number of permutations of isothermal, adiabatic, and constant-pressure and volume quasistatic strokes, with the working fluid usually being an ideal gas. Among them we find the Carnot, Stirling, Otto, Diesel, and Joule-Brayton cycles; in more advanced courses,…

  3. Quadratic reactivity fuel cycle model

    International Nuclear Information System (INIS)

    Lewins, J.D.

    1985-01-01

    For educational purposes it is highly desirable to provide simple yet realistic models for fuel cycle and fuel economy. In particular, a lumped model without recourse to detailed spatial calculations would be very helpful in providing the student with a proper understanding of the purposes of fuel cycle calculations. A teaching model for fuel cycle studies based on a lumped model assuming the summability of partial reactivities with a linear dependence of reactivity usefully illustrates fuel utilization concepts. The linear burnup model does not satisfactorily represent natural enrichment reactors. A better model, showing the trend of initial plutonium production before subsequent fuel burnup and fission product generation, is a quadratic fit. The study of M-batch cycles, reloading 1/Mth of the core at end of cycle, is now complicated by nonlinear equations. A complete account of the asymptotic cycle for any order of M-batch refueling can be given and compared with the linear model. A complete account of the transient cycle can be obtained readily in the two-batch model and this exact solution would be useful in verifying numerical marching models. It is convenient to treat the parabolic fit rho = 1 - tau 2 as a special case of the general quadratic fit rho = 1 - C/sub tau/ - (1 - C)tau 2 in suitably normalized reactivity and cycle time units. The parabolic results are given in this paper

  4. National Urea Cycle Disorders Foundation

    Science.gov (United States)

    ... urea cycle disorders. Donate Now To End Urea Cycle Disorders © 2005-2017 NUCDF. All rights reserved. This site may be freely linked to but not copied or duplicated in any fashion without the Foundation's consent. Make A Donation in ...

  5. The water cycle for kids

    Science.gov (United States)

    Neno, Stephanie; Morgan, Jim; Zonolli, Gabriele; Perlman, Howard; Gonthier, Gerard

    2013-01-01

    The U.S. Geological Survey (USGS) and the Food and Agriculture Organization of the United Nations (FAO) have created a water-cycle diagram for use in elementary and middle schools. The diagram is available in many languages. This diagram is part of the USGS's Water Science School, in which the water cycle is described in detail.

  6. Credit cycles and macro fundamentals

    NARCIS (Netherlands)

    Koopman, S.J.; Kraeussl, R.G.W.; Lucas, A.; Monteiro, A.

    2009-01-01

    We use an intensity-based framework to study the relation between macroeconomic fundamentals and cycles in defaults and rating activity. Using Standard and Poor's U.S. corporate rating transition and default data over the period 1980-2005, we directly estimate the default and rating cycle from micro

  7. Nuclear fuel cycle information workshop

    International Nuclear Information System (INIS)

    1983-01-01

    This overview of the nuclear fuel cycle is divided into three parts. First, is a brief discussion of the basic principles of how nuclear reactors work; second, is a look at the major types of nuclear reactors being used and world-wide nuclear capacity; and third, is an overview of the nuclear fuel cycle and the present industrial capability in the US

  8. Analysis of possible fuel cycles

    International Nuclear Information System (INIS)

    Boehm, H.; Kessler, G.; Engelmann, P.; Maerkl, H.; Stoll, W.

    1978-01-01

    A brief survey is presented of the most important fuel cycles. A rough analysis of fuel cycles is attempted under the aspects of proliferation, status of technical feasibility, resource conservation and waste management and the most important criteria for such an analysis are discussed. Among the multitude of potential combinations of fuel cycles and types of reactors only a few have reached a level of technical feasibility which would make them eligible for commercial implementation within the next decade. However, if, for instance, the higher proliferation resistance of a specific fuel cycle is to be utilized to diminish the worldwide proliferation hazard, that cycle would first of all have to be introduced on an industrial scale as quickly as possible. The analysis shows that the reduction of the bazard of worldwide proliferation will continue to be the objective primarily of international agreements and measures taken in the political realm. (orig.) [de

  9. Fuel cycle optimization in PWR'S

    International Nuclear Information System (INIS)

    Castro Lobo, P.D. de; Amorim, E.S. do.

    1979-08-01

    Neutronics aspects of a reactor core throughout its cycle were investigated in a search for increasing in-core utilization of the residual fissile isotopes content in the cycle discharged disposal. The effects due to design modifications introduced at burnup levels near the end-of-cycle, in an equilibrium cycle condition, have indicated the possibility of a better in-core utilization of the residual fissile isotopes existing in the cycle discharged disposal. The potential benefits are significant to warranty an examination of the mechanical and thermal hydraulic involved. At convenient burnup levels, change in H 2 O/UO 2 volume ratio were introduced allowing an intense depletion of the residual fissile isotopes existing in assemblies with high exposures levels. (Author) [pt

  10. Fuel cycle cost uncertainty from nuclear fuel cycle comparison

    International Nuclear Information System (INIS)

    Li, J.; McNelis, D.; Yim, M.S.

    2013-01-01

    This paper examined the uncertainty in fuel cycle cost (FCC) calculation by considering both model and parameter uncertainty. Four different fuel cycle options were compared in the analysis including the once-through cycle (OT), the DUPIC cycle, the MOX cycle and a closed fuel cycle with fast reactors (FR). The model uncertainty was addressed by using three different FCC modeling approaches with and without the time value of money consideration. The relative ratios of FCC in comparison to OT did not change much by using different modeling approaches. This observation was consistent with the results of the sensitivity study for the discount rate. Two different sets of data with uncertainty range of unit costs were used to address the parameter uncertainty of the FCC calculation. The sensitivity study showed that the dominating contributor to the total variance of FCC is the uranium price. In general, the FCC of OT was found to be the lowest followed by FR, MOX, and DUPIC. But depending on the uranium price, the FR cycle was found to have lower FCC over OT. The reprocessing cost was also found to have a major impact on FCC

  11. Limit cycles in quantum systems

    Energy Technology Data Exchange (ETDEWEB)

    Niemann, Patrick

    2015-04-27

    In this thesis we investigate Limit Cycles in Quantum Systems. Limit cycles are a renormalization group (RG) topology. When degrees of freedom are integrated out, the coupling constants flow periodically in a closed curve. The presence of limit cycles is restricted by the necessary condition of discrete scale invariance. A signature of discrete scale invariance and limit cycles is log-periodic behavior. The first part of this thesis is concerned with the study of limit cycles with the similarity renormalization group (SRG). Limit cycles are mainly investigated within conventional renormalization group frameworks, where degrees of freedom, which are larger than a given cutoff, are integrated out. In contrast, in the SRG potentials are unitarily transformed and thereby obtain a band-diagonal structure. The width of the band structure can be regarded as an effective cutoff. We investigate the appearance of limit cycles in the SRG evolution. Our aim is to extract signatures as well as the scaling factor of the limit cycle. We consider the 1/R{sup 2}-potential in a two-body system and a three-body system with large scattering lengths. Both systems display a limit cycle. Besides the frequently used kinetic energy generator we apply the exponential and the inverse generator. In the second part of this thesis, Limit Cycles at Finite Density, we examine the pole structure of the scattering amplitude for distinguishable fermions at zero temperature in the medium. Unequal masses and a filled Fermi sphere for each fermion species are considered. We focus on negative scattering lengths and the unitary limit. The properties of the three-body spectrum in the medium and implications for the phase structure of ultracold Fermi gases are discussed.

  12. Out-of-core fuel cycle optimization for nonequilibrium cycles

    International Nuclear Information System (INIS)

    Comes, S.A.; Turinsky, P.J.

    1988-01-01

    A methodology has been developed for determining the family of near-optimum fuel management schemes that minimize the levelized fuel cycle costs of a light water reactor over a multicycle planning horizon. Feed batch enrichments and sizes, burned batches to reinsert, and burnable poison loadings are determined for each cycle in the planning horizon. Flexibility in the methodology includes the capability to assess the economic benefits of various partially burned bath reload strategies as well as the effects of using split feed enrichments and enrichment palettes. Constraint limitations are imposed on feed enrichments, discharge burnups, moderator temperature coefficient, and cycle energy requirements

  13. Cycling biomechanics: a literature review.

    Science.gov (United States)

    Wozniak Timmer, C A

    1991-01-01

    Submitted in partial fulfillment for a Master of Science degree at the University of Pittsburgh, School of Health Related Professions, Pittsburgh, PA 1.5213 This review of current literature on cycling biomechanics emphasizes lower extremity muscle actions and joint excursions, seat height, pedal position, pedaling rate, force application, and pedaling symmetry. Guidelines are discussed for optimal seat height, pedal position, and pedaling rate. Force application in the power and recovery phases of cycling and the relationship of force application to pedaling symmetry are discussed. The need for a biomechanical approach to cycling exists since a great deal of the literature is primarily physiologic in nature. The purpose of this review is to make cyclists and their advisors aware of the biomechanics of cycling and guidelines to follow. This approach is also important because cycling is a very common form of exercise prescribed by physical therapists for clinic or home programs. Biomechanical aspects of cycling should be considered by cyclists at any level of participation and by physical therapists in order for goal-oriented, efficient cycling to occur. J Orthop Sports Phys Ther 1991;14(3):106-113.

  14. Cell Cycle Control by PTEN.

    Science.gov (United States)

    Brandmaier, Andrew; Hou, Sheng-Qi; Shen, Wen H

    2017-07-21

    Continuous and error-free chromosome inheritance through the cell cycle is essential for genomic stability and tumor suppression. However, accumulation of aberrant genetic materials often causes the cell cycle to go awry, leading to malignant transformation. In response to genotoxic stress, cells employ diverse adaptive mechanisms to halt or exit the cell cycle temporarily or permanently. The intrinsic machinery of cycling, resting, and exiting shapes the cellular response to extrinsic stimuli, whereas prevalent disruption of the cell cycle machinery in tumor cells often confers resistance to anticancer therapy. Phosphatase and tensin homolog (PTEN) is a tumor suppressor and a guardian of the genome that is frequently mutated or deleted in human cancer. Moreover, it is increasingly evident that PTEN deficiency disrupts the fundamental processes of genetic transmission. Cells lacking PTEN exhibit cell cycle deregulation and cell fate reprogramming. Here, we review the role of PTEN in regulating the key processes in and out of cell cycle to optimize genomic integrity. Copyright © 2017 Elsevier Ltd. All rights reserved.

  15. When Product Life Cycle Meets Customer Activity Cycle

    DEFF Research Database (Denmark)

    Tan, Adrian Ronald

    2007-01-01

    Manufacturing companies have traditionally focused their efforts on designing, developing and producing products to offer on the market. Today global competition and demands for greater company responsibility of products throughout their entire life cycle are driving manufacturing companies to sh...

  16. Fuel cycle economics of HTRs

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, U.

    1975-06-15

    The High Temperature Reactor commands a unique fuel cycle flexibility and alternative options are open to the utilities. The reference thorium reactor operating in the U-233 recycle mode is 10 to 20% cheaper than the low-enriched reactor; however, the thorium cycle depends on the supply of 93% enriched uranium and the availability of reprocessing and refabrication facilities to utilize its bred fissile material. The economic landscape towards the end of the 20th Century will presumably be dominated by pronounced increases in the costs of natural resources. In the case of nuclear energy, resource considerations are reflected in the price of uranium, which is expected Lo have reached 50 $/lbm U3O8 in the early 1990s and around 100 $/lbm U3O8 around 2010. In this economic environment the fuel cycle advantage of the thorium system amounts to some 20% and is capable of absorbing substantial expenses in bringing about the closing of the out-of-pile cycle. A most attractive aspect of the HTR fuel cycle flexibility is for the utility to start operating the reactor on the low enriched uranium cycle and at a later date switch over to the thorium cycle as this becomes economically more and more attractive. The incentive amounts to some 50 M$ in terms of present worth money at the time of decision making, assumed to take place 10 years after start-up. The closing of the thorium cycle is of paramount importance and a step to realize this objective lies in simplifying the head-end reprocessing technology by abandoning the segregation concept of feed and breed coated particles in the reference cycle. A one-coated-particle scheme in which all discharged uranium isotopes are recycled in mixed oxide particles is feasible and suffers a very minor economic penalty only.

  17. The evolving nuclear fuel cycle

    International Nuclear Information System (INIS)

    Gale, J.D.; Hanson, G.E.; Coleman, T.A.

    1993-01-01

    Various economics and political pressures have shaped the evolution of nuclear fuel cycles over the past 10 to 15 yr. Future trends will no doubt be similarly driven. This paper discusses the influences that long cycles, high discharge burnups, fuel reliability, and costs will have on the future nuclear cycle. Maintaining the economic viability of nuclear generation is a key issue facing many utilities. Nuclear fuel has been a tremendous bargain for utilities, helping to offset major increases in operation and maintenance (O ampersand M) expenses. An important factor in reducing O ampersand M costs is increasing capacity factor by eliminating outages

  18. Introducing Life Cycle Impact Assessment

    DEFF Research Database (Denmark)

    Hauschild, Michael Zwicky; Huijbregts, Mark AJ

    2015-01-01

    This chapter serves as an introduction to the presentation of the many aspects of life cycle impact assessment (LCIA) in this volume of the book series ‘LCA Compendium’. It starts with a brief historical overview of the development of life cycle impact assessment driven by numerous national LCIA...... methodology projects and presents the international scientific discussions and methodological consensus attempts in consecutive working groups under the auspices of the Society of Environmental Toxicology and Chemistry (SETAC) as well as the UNEP/ SETAC Life Cycle Initiative, and the (almost) parallel...

  19. The fuel cycle scoping system

    International Nuclear Information System (INIS)

    Dooley, G.D.; Malone, J.P.

    1986-01-01

    The Fuel Cycle Scoping System (FCSS) was created to fill the need for a scoping tool which provides the utilities with the ability to quickly evaluate alternative fuel management strategies, tails assay choices, fuel fabrication quotes, fuel financing alternatives, fuel cycle schedules, and other fuel cycle perturbations. The FCSS was specifically designed for PC's that support dBASE-III(TM), a relational data base software system by Ashton-Tate. However, knowledge of dBASE-III is not necessary in order to utilize the FCSS. The FCSS is menu driven and can be utilized as a teaching tool as well as a scoping tool

  20. Digital daily cycles of individuals

    DEFF Research Database (Denmark)

    Aledavood, Talayeh; Jørgensen, Sune Lehmann; Saramäki, Jari

    2015-01-01

    Humans, like almost all animals, are phase-locked to the diurnal cycle. Most of us sleep at night and are active through the day. Because we have evolved to function with this cycle, the circadian rhythm is deeply ingrained and even detectable at the biochemical level. However, within the broader...... day-night pattern, there are individual differences: e.g., some of us are intrinsically morning-active, while others prefer evenings. In this article, we look at digital daily cycles: circadian patterns of activity viewed through the lens of auto-recorded data of communication and online activity. We...

  1. Solar cycles and climate variations

    International Nuclear Information System (INIS)

    Chistyakov, V.F.

    1990-01-01

    Climate oscillations with 100-, 200- and 300-year periods are positively correlated with solar activity oscillations: the higher is solar activity the warmer is climate. According to geological data (varved clays) it is determined, that length of cycles has decreased from 23.4 up to 11 years during latter 2.5 billion years. 12-year cycles occurred during the great glaciation periods, while 10-year cycles occurred during interglaciation periods. It is suggested, that these oscillations are related with variations of the solar activity and luminescence

  2. BWROPT: A multi-cycle BWR fuel cycle optimization code

    Energy Technology Data Exchange (ETDEWEB)

    Ottinger, Keith E.; Maldonado, G. Ivan, E-mail: Ivan.Maldonado@utk.edu

    2015-09-15

    Highlights: • A multi-cycle BWR fuel cycle optimization algorithm is presented. • New fuel inventory and core loading pattern determination. • The parallel simulated annealing algorithm was used for the optimization. • Variable sampling probabilities were compared to constant sampling probabilities. - Abstract: A new computer code for performing BWR in-core and out-of-core fuel cycle optimization for multiple cycles simultaneously has been developed. Parallel simulated annealing (PSA) is used to optimize the new fuel inventory and placement of new and reload fuel for each cycle considered. Several algorithm improvements were implemented and evaluated. The most significant of these are variable sampling probabilities and sampling new fuel types from an ordered array. A heuristic control rod pattern (CRP) search algorithm was also implemented, which is useful for single CRP determinations, however, this feature requires significant computational resources and is currently not practical for use in a full multi-cycle optimization. The PSA algorithm was demonstrated to be capable of significant objective function reduction and finding candidate loading patterns without constraint violations. The use of variable sampling probabilities was shown to reduce runtime while producing better results compared to using constant sampling probabilities. Sampling new fuel types from an ordered array was shown to have a mixed effect compared to random new fuel type sampling, whereby using both random and ordered sampling produced better results but required longer runtimes.

  3. Life-cycle cost analysis of adsorption cycles for desalination

    KAUST Repository

    Thu, Kyaw

    2010-08-01

    This paper presents the thermo-economic analysis of the adsorption desalination (AD) cycle that is driven by low-temperature waste heat from exhaust of industrial processes or renewable sources. The AD cycle uses an adsorbent such as the silica gel to desalt the sea or brackish water. Based on an experimental prototype AD plant, the life-cycle cost analysis of AD plants of assorted water production capacities has been simulated and these predictions are translated into unit cost of water production. Our results show that the specific energy consumption of the AD cycle is 1.38 kWh/m3 which is the lowest ever reported. For a plant capacity of 1000 m3/d, the AD cycle offers a unit cost of $0.457/m3 as compared to more than $0.9 for the average RO plants. Besides being cost-effective, the AD cycle is also environment-friendly as it emits less CO2 emission per m3 generated, typically 85% less, by comparison to an RO process. © 2010 Desalination Publications.

  4. Towards Life Cycle Sustainability Assessment

    Directory of Open Access Journals (Sweden)

    Marzia Traverso

    2010-10-01

    Full Text Available Sustainability is nowadays accepted by all stakeholders as a guiding principle for both public policy making and corporate strategies. However, the biggest challenge for most organizations remains in the real and substantial implementation of the sustainability concept. The core of the implementation challenge is the question, how sustainability performance can be measured, especially for products and processes. This paper explores the current status of Life Cycle Sustainability Assessment (LCSA for products and processes. For the environmental dimension well established tools like Life Cycle Assessment are available. For the economic and social dimension, there is still need for consistent and robust indicators and methods. In addition to measuring the individual sustainability dimensions, another challenge is a comprehensive, yet understandable presentation of the results. The “Life Cycle Sustainability Dashboard” and the “Life Cycle Sustainability Triangle” are presented as examples for communication tools for both experts and non expert stakeholders.

  5. Endogenous, Imperfectly Competitive Business Cycles

    DEFF Research Database (Denmark)

    Whitta-Jacobsen, Hans Jørgen

    We investigate how imperfect competition affects the occurrence and the properties of endogenous, rational expectations business cycles in an overlapping generations model with constant returns to scale in production. The model has explicit product and labor markets all characterized...... by monopolistic competition. An implicit assumption of barriers to entry justifies that the number of firms is fixed even when positive profits occur. It turns out that both market power of firms on the product markets and market power of unions on the labor markets make the occurrence of cycles more likely....... In particular, imperfect competition on the product markets and the positive profits associated with it may have the effect that there is a cycle even if the labor supply curve is increasing in the real-wage rate. For competitive cycles is required not only a decreasing labor supply curve, but a wage elasticity...

  6. Air Quality Management Process Cycle

    Science.gov (United States)

    Air quality management are activities a regulatory authority undertakes to protect human health and the environment from the harmful effects of air pollution. The process of managing air quality can be illustrated as a cycle of inter-related elements.

  7. Ammonium generation during SRAT cycle

    International Nuclear Information System (INIS)

    Hsu, C.W.

    1992-01-01

    During the IDMS noble-metal demonstration runs ammonium nitrate deposition was found in the vessel vent system of the feed preparation area. In the bench-scale experiments of studying the hydrogen generation during the sludge treatment cycle, ammonium ion production was also monitored. It was found that: During a simulation of the DWPF Cold Chemical Runs SRAT cycle no detectable amount of ammonium ions was generated when treating a non-noble-metal containing sludge simulant according to the nitric acid flowsheet. Ammonium ions were generated during the SRAT-SME cycle when treating the noble-metal containing sludge with either formic acid or nitric acid/late-washing PHA. This is due to the reaction between formic acid and nitrate catalyzed by the noble metals in the sludge simulant. Ammonium ion production closely followed the hydrogen evolution from the catalytic decomposition of formic acid. This report summarizes the results of the production of ammonia during the SRAT cycle

  8. EPA Nonregulatory Nonroad Duty Cycles

    Science.gov (United States)

    EPA nonregulatory, nonroad duty cycles for equipment such as agricultural tractors, backhoe loaders,crawlers tractors, excavators, arc welding skid steer loaders, and wheel loaders. Also,test procedures, laboratory methods, and emissions for this equipmen

  9. Total Product Life Cycle (TPLC)

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Total Product Life Cycle (TPLC) database integrates premarket and postmarket data about medical devices. It includes information pulled from CDRH databases...

  10. Detonation Jet Engine. Part 1--Thermodynamic Cycle

    Science.gov (United States)

    Bulat, Pavel V.; Volkov, Konstantin N.

    2016-01-01

    We present the most relevant works on jet engine design that utilize thermodynamic cycle of detonative combustion. The efficiency advantages of thermodynamic detonative combustion cycle over Humphrey combustion cycle at constant volume and Brayton combustion cycle at constant pressure were demonstrated. An ideal Ficket-Jacobs detonation cycle, and…

  11. On acyclicity of games with cycles

    DEFF Research Database (Denmark)

    Andersson, Klas Olof Daniel; Hansen, Thomas Dueholm; Gurvich, Vladimir

    2010-01-01

    We study restricted improvement cycles (ri-cycles) in finite positional n-person games with perfect information modeled by directed graphs (di-graphs) that may contain directed cycles (di-cycles). We assume that all these di-cycles form one outcome c, for example, a draw. We obtain criteria...

  12. Implications of alternative fuel cycles

    International Nuclear Information System (INIS)

    Anon.

    1978-01-01

    The United States is re-examining alternative fuel cycles and nuclear power strategies, and doubtful attempts are being made to justify the economics of the 'throw-away' fuel cycle. At an international forum on 'An acceptable nuclear energy future for the world' at Fort Lauderdale, Karl Cohen of General Electric and a leading authority on this topic put the implications into perspective. Extracts from his address are presented

  13. Business Cycle Theory and Econometrics.

    OpenAIRE

    Gregory, Allan W; Smith, Gregor W

    1995-01-01

    We outline in turn criticisms made by econometricians of the methods used in empirical business-cycle research and then criticisms made by business-cycle researchers of some methods used by econometricians. The aim is to clarify and in some cases correct these criticisms. Overall there is no conflict in using rigourous statistical procedures to study modern dynamic stochastic general equilibrium models. We also provide a concise bibliography of recent research on statistical methods for busin...

  14. Advertising and Business Cycle Fluctuations

    OpenAIRE

    Benedetto Molinari; Francesco Turino

    2009-01-01

    This paper provides new empirical evidence of quarterly U.S. aggregate advertising expenditures, showing that advertising has a well defined pattern over the Business Cycle. To understand this pattern we develop a general equilibrium model where targeted advertising increases the marginal utility of the advertised good. Advertising intensity is endogenously determined by profit maximizing firms. We embed this assumption into an otherwise standard model of business cycle with monopolistic comp...

  15. Rapsodie: A closed fuel cycle

    International Nuclear Information System (INIS)

    Levallet, E.H.; Costa, L.; Mougniot, J.C.; Robin, J.

    1977-01-01

    The Fortissimo Version of the core of the RAPSODIE fast reactor produces 40 MWTh. Since its start up in May 1970 in the CEN-CADARACHE its availability has stayed around 85%. Some of the mixed oxyde fuel pins UO 2 - 30% PuO 2 have already reached 150.000 MWd/t. The reprocessing is done in the pilot plant located in the La Hague Center and the plutonium obtained has already been re-used in the reactor. The Rapsodie-Fortissimo cycle is therefore now a closed cycle. This cycle is quite representative of fast reactor cycle characteristics and thus provides a remarkable research and development tool for the study of fabrication, in-reactor performances, transport, storage and reprocessing. These studies concern in particular the evolution of fission products and heavy isotopes content in fuel which controls both reprocessing schemes and intensity of emitted radiations. A program for the analysis of irradiated fuel has been developed either using samples collected all along the cycle, or following the actual reprocessing subassemblies. A set of basic data and calculation models has been established with two objectives: to give a better interpretation of the experimental program on one hand, and to extrapolate these results to the fuel cycle of fast reactors in general on the other hand. The first results have been quite encouraging up to now [fr

  16. Cycle bases to the rescue

    Science.gov (United States)

    Tóbiás, Roland; Furtenbacher, Tibor; Császár, Attila G.

    2017-12-01

    Cycle bases of graph theory are introduced for the analysis of transition data deposited in line-by-line rovibronic spectroscopic databases. The principal advantage of using cycle bases is that outlier transitions -almost always present in spectroscopic databases built from experimental data originating from many different sources- can be detected and identified straightforwardly and automatically. The data available for six water isotopologues, H216O, H217O, H218O, HD16O, HD17O, and HD18O, in the HITRAN2012 and GEISA2015 databases are used to demonstrate the utility of cycle-basis-based outlier-detection approaches. The spectroscopic databases appear to be sufficiently complete so that the great majority of the entries of the minimum cycle basis have the minimum possible length of four. More than 2000 transition conflicts have been identified for the isotopologue H216O in the HITRAN2012 database, the seven common conflict types are discussed. It is recommended to employ cycle bases, and especially a minimum cycle basis, for the analysis of transitions deposited in high-resolution spectroscopic databases.

  17. Fuel cycles using adulterated plutonium

    International Nuclear Information System (INIS)

    Brooksbank, R.E.; Bigelow, J.E.; Campbell, D.O.; Kitts, F.G.; Lindauer, R.B.

    1978-01-01

    Adjustments in the U-Pu fuel cycle necessitated by decisions made to improve the nonproliferation objectives of the US are examined. The uranium-based fuel cycle, using bred plutonium to provide the fissile enrichment, is the fuel system with the highest degree of commercial development at the present time. However, because purified plutonium can be used in weapons, this fuel cycle is potentially vulnerable to diversion of that plutonium. It does appear that there are technologically sound ways in which the plutonium might be adulterated by admixture with 238 U and/or radioisotopes, and maintained in that state throughout the fuel cycle, so that the likelihood of a successful diversion is small. Adulteration of the plutonium in this manner would have relatively little effect on the operations of existing or planned reactors. Studies now in progress should show within a year or two whether the less expensive coprocessing scheme would provide adequate protection (coupled perhaps with elaborate conventional safeguards procedures) or if the more expensive spiked fuel cycle is needed as in the proposed civex pocess. If the latter is the case, it will be further necessary to determine the optimum spiking level, which could vary as much as a factor of a billion. A very basic question hangs on these determinations: What is to be the nature of the recycle fuel fabrication facilities. If the hot, fully remote fuel fabrication is required, then a great deal of further development work will be required to make the full cycle fully commercial

  18. Optimization of the fuel cycle

    International Nuclear Information System (INIS)

    Kidd, S.W.; Balu, K.; Boczar, P.G.; Krebs, W.D.

    1999-01-01

    The nuclear fuel cycle can be optimized subject to a wide range of criteria. Prime amongst these are economics, sustainability of resources, environmental aspects, and proliferation-resistance of the fuel cycle. Other specific national objectives will also be important. These criteria, and their relative importance, will vary from country to country, and with time. There is no single fuel cycle strategy that is optimal for all countries. Within the short term, the industry is attached to dominant thermal reactor technologies, which themselves have two main variants, a cycle closed by reprocessing of spent fuel and subsequent recycling and a once through one where spent fuel is stored in advance of geological disposal. However, even with current technologies, much can be done to optimize the fuel cycles to meet the relevant criteria. In the long term, resource sustainability can be assured for centuries through the use of fast breeder reactors, supporting high-conversion thermal reactors, possibly also utilizing the thorium cycle. These must, however, meet the other key criteria by being both economic and safe. (author)

  19. The NEWS Water Cycle Climatology

    Science.gov (United States)

    Rodell, M.; Beaudoing, H. K.; L'Ecuyer, T.; Olson, W. S.

    2012-12-01

    NASA's Energy and Water Cycle Study (NEWS) program fosters collaborative research towards improved quantification and prediction of water and energy cycle consequences of climate change. In order to measure change, it is first necessary to describe current conditions. The goal of the first phase of the NEWS Water and Energy Cycle Climatology project was to develop "state of the global water cycle" and "state of the global energy cycle" assessments based on data from modern ground and space based observing systems and data integrating models. The project was a multi-institutional collaboration with more than 20 active contributors. This presentation will describe the results of the water cycle component of the first phase of the project, which include seasonal (monthly) climatologies of water fluxes over land, ocean, and atmosphere at continental and ocean basin scales. The requirement of closure of the water budget (i.e., mass conservation) at various scales was exploited to constrain the flux estimates via an optimization approach that will also be described. Further, error assessments were included with the input datasets, and we examine these in relation to inferred uncertainty in the optimized flux estimates in order to gauge our current ability to close the water budget within an expected uncertainty range.

  20. The NEWS Water Cycle Climatology

    Science.gov (United States)

    Rodell, Matthew; Beaudoing, Hiroko Kato; L'Ecuyer, Tristan; William, Olson

    2012-01-01

    NASA's Energy and Water Cycle Study (NEWS) program fosters collaborative research towards improved quantification and prediction of water and energy cycle consequences of climate change. In order to measure change, it is first necessary to describe current conditions. The goal of the first phase of the NEWS Water and Energy Cycle Climatology project was to develop "state of the global water cycle" and "state of the global energy cycle" assessments based on data from modern ground and space based observing systems and data integrating models. The project was a multi-institutional collaboration with more than 20 active contributors. This presentation will describe the results of the water cycle component of the first phase of the project, which include seasonal (monthly) climatologies of water fluxes over land, ocean, and atmosphere at continental and ocean basin scales. The requirement of closure of the water budget (i.e., mass conservation) at various scales was exploited to constrain the flux estimates via an optimization approach that will also be described. Further, error assessments were included with the input datasets, and we examine these in relation to inferred uncertainty in the optimized flux estimates in order to gauge our current ability to close the water budget within an expected uncertainty range.

  1. Very high cycle fatigue testing of concrete using ultrasonic cycling

    Energy Technology Data Exchange (ETDEWEB)

    Karr, Ulrike; Schuller, Reinhard; Fitzka, Michael; Mayer, Herwig [Univ. of Natural Resources and Life Sciences, Vienna (Austria). Inst. of Physics and Materials Science; Denk, Andreas; Strauss, Alfred [Univ. of Natural Resources and Life Sciences, Vienna (Austria)

    2017-06-01

    The ultrasonic fatigue testing method has been further developed to perform cyclic compression tests with concrete. Cylindrical specimens vibrate in resonance at a frequency of approximately 20 kHz with superimposed compressive static loads. The high testing frequency allows time-saving investigations in the very high cycle fatigue regime. Fatigue tests were carried out on ''Concrete 1'' (compressive strength f{sub c} = 80 MPa) and ''Concrete 2'' (f{sub c} = 107 MPa) under purely compressive loading conditions. Experiments at maximum compressive stresses of 0.44 f{sub c} (Concrete 1) and 0.38 f{sub c} (Concrete 2) delivered specimen failures above 109 cycles, indicating that no fatigue limit exists for concrete below one billion load cycles. Resonance frequency, power required to resonate the specimen and second order harmonics of the vibration are used to monitor fatigue damage in situ. Specimens were scanned by X-ray computed tomography prior to and after testing. Fatigue cracks were produced by ultrasonic cycling in the very high cycle fatigue regime at interfaces of grains as well as in cement. The possibilities as well as limitations of ultrasonic fatigue testing of concrete are discussed.

  2. The Sphinx's Riddle: Life and Career Cycles.

    Science.gov (United States)

    Burack, Elmer H.

    1984-01-01

    Career cycles should be considered apart from life cycles, even though the two are interrelated. This essay examines five theories about life and career cycles, and offers insights into their limitations and potential uses. (JB)

  3. Management Cycle: from Planning to Evaluation

    OpenAIRE

    Kova?i?, Luka; Jakši?, Želimir

    2008-01-01

    The planning process in health care known as management cycle or cycle of organization and management is described. The cycle is divided in four main elements: planning, organization, implementation and evaluation. Each element is defined and described.

  4. Optimal Life Cycle Portfolio Choice with Housing Market Cycles

    DEFF Research Database (Denmark)

    Fischer, Marcel; Stamos, Michael Z.

    2013-01-01

    income, and pre-existing housing wealth but also the state of the housing market significantly affect household decisions. Consistently with the data, the model predicts that in good states of housing market cycles (1) homeownership rates increase, (2) households buying homes invest a larger share......In recent decades U.S. households have experienced residential house prices moving persistently, that is, returns being positively serially correlated. We set up a realistically calibrated life cycle model with slow-moving time variation in expected housing returns, showing that not only age, labor...

  5. Answering Key Fuel Cycle Questions

    International Nuclear Information System (INIS)

    Piet, S.J.; Dixon, B.W.; Bennett, R.G.; Smith, J.D.; Hill, R.N.

    2004-01-01

    Given the range of fuel cycle goals and criteria, and the wide range of fuel cycle options, how can the set of options eventually be narrowed in a transparent and justifiable fashion? It is impractical to develop all options. We suggest an approach that starts by considering a range of goals for the Advanced Fuel Cycle Initiative (AFCI) and then posits seven questions, such as whether Cs and Sr isotopes should be separated from spent fuel and, if so, what should be done with them. For each question, we consider which of the goals may be relevant to eventually providing answers. The AFCI program has both ''outcome'' and ''process'' goals because it must address both waste already accumulating as well as completing the fuel cycle in connection with advanced nuclear power plant concepts. The outcome objectives are waste geologic repository capacity and cost, energy security and sustainability, proliferation resistance, fuel cycle economics, and safety. The process objectives are rea diness to proceed and adaptability and robustness in the face of uncertainties

  6. Antifreeze life cycle assessment (LCA

    Directory of Open Access Journals (Sweden)

    Kesić Jelena

    2005-01-01

    Full Text Available Antifreeze based on ethylene glycol is a commonly used commercial product The classification of ethylene glycol as a toxic material increased the disposal costs for used antifreeze and life cycle assessment became a necessity. Life Cycle Assessment (LCA considers the identification and quantification of raw materials and energy inputs and waste outputs during the whole life cycle of the analyzed product. The objectives of LCA are the evaluation of impacts on the environment and improvements of processes in order to reduce and/or eliminate waste. LCA is conducted through a mathematical model derived from mass and energy balances of all the processes included in the life cycle. In all energy processes the part of energy that can be transformed into some other kind of energy is called exergy. The concept of exergy considers the quality of different types of energy and the quality of different materials. It is also a connection between energy and mass transformations. The whole life cycle can be described by the value of the total loss of exergy. The physical meaning of this value is the loss of material and energy that can be used. The results of LCA are very useful for the analyzed products and processes and for the determined conditions under which the analysis was conducted. The results of this study indicate that recycling is the most satisfactory solution for the treatment of used antifreeze regarding material and energy consumption but the re-use of antifreeze should not be neglected as a solution.

  7. Origins of the supercontinent cycle

    Directory of Open Access Journals (Sweden)

    R. Damian Nance

    2013-07-01

    Full Text Available The supercontinent cycle, by which Earth history is seen as having been punctuated by the episodic assembly and breakup of supercontinents, has influenced the rock record more than any other geologic phenomena, and its recognition is arguably the most important advance in Earth Science since plate tectonics. It documents fundamental aspects of the planet's interior dynamics and has charted the course of Earth's tectonic, climatic and biogeochemical evolution for billions of years. But while the widespread realization of the importance of supercontinents in Earth history is a relatively recent development, the supercontinent cycle was first proposed thirty years ago and episodicity in tectonic processes was recognized long before plate tectonics provided a potential explanation for its occurrence. With interest in the supercontinent cycle gaining momentum and the literature expanding rapidly, it is instructive to recall the historical context from which the concept developed. Here we examine the supercontinent cycle from this perspective by tracing its development from the early recognition of long-term episodicity in tectonic processes, through the identification of tectonic cycles following the advent of plate tectonics, to the first realization that these phenomena were the manifestation of episodic supercontinent assembly and breakup.

  8. Characteristics of fuel cycle waste

    International Nuclear Information System (INIS)

    Aquilina, C.A.; Everette, S.E.

    1982-01-01

    The Low-Level Waste Management System started in 1979 to describe and model the existing commercial low-level waste management system. The system description produced is based on the identification of the different elements making up both the fuel and non-fuel cycle and their relationships to each other. A systems model based on the system description can accurately reflect the flow of low-level waste from generator to disposal site and is only limited by the reliability of the information it uses. For both the fuel cycle and non-fuel cycle large quantities of information is required in order to allow the system to operate at its full potential. Work is ongoing to collect this information. Significant progress is being made in the fuel cycle area primarily because the majority of fuel cycle low-level radioactive waste is produced by commercial power reactor plant operations. The Low-Level Waste Management system is only beginning to derive the benefits to be obtained from an accurate low-level waste management information system. As data is verified and analyzed, results on a national as well as individual organization level will be gained. Comparisons to previous studies will be made. Accurate projections of waste volumes and activities to be produced, projected impacts of waste streams of treatment or management changes are only examples of information to be produced. 1 figure, 1 table

  9. Air bottoming cycle, an alternative to combined cycles. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Kaikko, J. [Royal Inst. of Tech., Stockholm (Sweden). Dept. of Energy Technology

    2002-02-01

    In this work, the idea of Air Bottoming Cycle (ABC) has been studied. The objectives for the work have been to establish an understanding of the concept for power and heat generation as well as to find - if possible - feasible concepts for future use in the Swedish energy system. Combined cycle in power generation is an established technology. In the conventional combined cycle, a gas turbine works as a topping cycle together with the steam (Rankine) bottoming cycle. In the ABC the steam bottoming cycle is replaced with a gas turbine (Brayton) bottoming cycle having air as a working fluid. The two gas turbines are thermally connected over a gas-to-gas heat exchanger. This concept promises savings in weight and cost, as well as operating benefits, compared to the Rankine bottoming technology. The ABC has been modelled using a heat balance program, and a parametric study for the concept optimisation as well as for off-design analysis has been performed. Performance of the ABC has been compared to other, established technologies. A preliminary economic evaluation has been made. As a result of the study, it is clarified that the Rankine bottoming cycle with steam remains superior to the ABC as regards electrical efficiency in the medium and large power scale. For small-scale applications (<10 MW{sub e}) where the thermodynamic advantage of the Rankine cycle is not dominating any longer and its economy is burdened by the heavy investment structure, the ABC becomes the better alternative for energy utilisation. A preliminary economic evaluation shows that (at energy prices autumn 2000) the ABC is at the same level as the comparable small-scale cogeneration installations. Due to high power-to-heat ratio however, higher electricity prices will favour the ABC. One interesting feature of the ABC is that about 50% of the dissipated low-value heat from the cycle is carried by clean (sterile) air at the temperature around 200 deg C. This air can be utilised for space heating or

  10. Air bottoming cycle, an alternative to combined cycles. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Kaikko, J. [Royal Inst. of Techn., Stockholm (Sweden). Dept. of Energy Technology

    2001-10-01

    In this work, the idea of Air Bottoming Cycle (ABC) has been studied. The objectives for the work have been to establish an understanding of the concept for power and heat generation as well as to find - if possible - feasible concepts for future use in the Swedish energy system. Combined cycle in power generation is an established technology. In the conventional combined cycle, a gas turbine works as a topping cycle together with the steam (Rankine) bottoming cycle. In the ABC the steam bottoming cycle is replaced with a gas turbine (Brayton) bottoming cycle having air as a working fluid. The two gas turbines are thermally connected over a gas-to-gas heat exchanger. This concept promises savings in weight and cost, as well as operating benefits, compared to the Rankine bottoming technology. The ABC has been modelled using a heat balance program, and a parametric study for the concept optimisation as well as for off-design analysis has been performed. Performance of the ABC has been compared to other, established technologies. A preliminary economic evaluation has been made. As a result of the study, it is clarified that the Rankine bottoming cycle with steam remains superior to the ABC as regards electrical efficiency in the medium and large power scale. For small-scale applications (<10 MW{sub e}) where the thermodynamic advantage of the Rankine cycle is not dominating any longer and its economy is burdened by the heavy investment structure, the ABC becomes the better alternative for energy utilisation. A preliminary economic evaluation shows that (at energy prices autumn 2000) the ABC is at the same level as the comparable small-scale cogeneration installations. Due to high power-to-heat ratio however, higher electricity prices will favour the ABC. One interesting feature of the ABC is that about 50% of the dissipated low-value heat from the cycle is carried by clean (sterile) air at the temperature around 200 deg C. This air can be utilised for space heating or

  11. CANDU fuel-cycle vision

    International Nuclear Information System (INIS)

    Boczar, P.G.

    1999-01-01

    The fuel-cycle path chosen by a particular country will depend on a range of local and global factors. The CANDU reactor provides the fuel-cycle flexibility to enable any country to optimize its fuel-cycle strategy to suit its own needs. AECL has developed the CANFLEX fuel bundle as the near-term carrier of advanced fuel cycles. A demonstration irradiation of 24 CANFLEX bundles in the Point Lepreau power station, and a full-scale critical heat flux (CHF) test in water are planned in 1998, before commercial implementation of CANFLEX fuelling. CANFLEX fuel provides a reduction in peak linear element ratings, and a significant enhancement in thermalhydraulic performance. Whereas natural uranium fuel provides many advantages, the use of slightly enriched uranium (SEU) in CANDU reactors offers even lower fuel-cycle costs and other benefits, such as uprating capability through flattening the channel power distribution across the core. Recycled uranium (RU) from reprocessing spent PWR fuel is a subset of SEU that has significant economic promise. AECL views the use of SEU/RU in the CANFLEX bundle as the first logical step from natural uranium. High neutron economy enables the use of low-fissile fuel in CANDU reactors, which opens up a spectrum of unique fuel-cycle opportunities that exploit the synergism between CANDU reactors and LWRs. At one end of this spectrum is the use of materials from conventional reprocessing: CANDU reactors can utilize the RU directly without re-enrichment, the plutonium as conventional Mixed-oxide (MOX) fuel, and the actinide waste mixed with plutonium in an inert-matrix carrier. At the other end of the spectrum is the DUPIC cycle, employing only thermal-mechanical processes to convert spent LWR fuel into CANDU fuel, with no purposeful separation of isotopes from the fuel, and possessing a high degree of proliferation resistance. Between these two extremes are other advanced recycling options that offer particular advantages in exploiting the

  12. CANDU fuel-cycle vision

    International Nuclear Information System (INIS)

    Boczar, P.G

    1998-05-01

    The fuel-cycle path chosen by a particular country will depend on a range of local and global factors. The CANDU reactor provides the fuel-cycle flexibility to enable any country to optimize its fuel-cycle strategy to suit its own needs. AECL has developed the CANFLEX fuel bundle as the near-term carrier of advanced fuel cycles. A demonstration irradiation of 24 CANFLEX bundles in the Point Lepreau power station, and a full-scale critical heat flux (CHF) test in water are planned in 1998, before commercial implementation of CANFLEX fuelling. CANFLEX fuel provides a reduction in peak linear element ratings, and a significant enhancement in thermalhydraulic performance. Whereas natural uranium fuel provides many advantages, the use of slightly enriched uranium (SEU) in CANDU reactors offers even lower fuel-cycle costs and other benefits, such as uprating capability through flattening the channel power distribution across the core. Recycled uranium (RU) from reprocessing spent PWR fuel is a subset of SEU that has significant economic promise. AECL views the use of SEU/RU in the CANFLEX bundle as the first logical step from natural uranium. High neutron economy enables the use of low-fissile fuel in CANDU reactors, which opens up a spectrum of unique fuel-cycle opportunities that exploit the synergism between CANDU reactors and LWRs. At one end of this spectrum is the use of materials from conventional reprocessing: CANDU reactors can utilize the RU directly without reenrichment, the plutonium as conventional mixed-oxide (MOX) fuel, and the actinide waste mixed with plutonium in an inert-matrix carrier. At the other end of the spectrum is the DUPIC cycle, employing only thermal-mechanical processes to convert spent LWR fuel into CANDU fuel, with no purposeful separation of isotopes from the fuel, and possessing a high degree of proliferation resistance. Between these two extremes are other advanced recycling options that offer particular advantages in exploiting the

  13. Proliferation resistance fuel cycle technology

    Energy Technology Data Exchange (ETDEWEB)

    Lee, J. S.; Ko, W. I

    1999-02-01

    The issues of dual use in nuclear technology are analysed for nuclear fuel cycle with special focus on uranium enrichment and spent fuel reprocessing which are considered as the most sensitive components in terms of vulnerability to diversion. Technical alternatives to mitigrate the vulnerability, as has been analysed in depth during the NASAP and INFCE era in the late seventies, are reviewed to characterize the DUPIC fuel cycle alternative. On the other hand, the new realities in nuclear energy including the disposition of weapon materials as a legacy of cold war are recast in an angle of nuclear proliferation resistance and safeguards with a discussion on the concept of spent fuel standard concept and its compliance with the DUPIC fuel cycle technology. (author)

  14. Measuring risky adolescent cycling behaviour.

    Science.gov (United States)

    Feenstra, Hans; Ruiter, Robert A C; Schepers, Jan; Peters, Gjalt-Jorn; Kok, Gerjo

    2011-09-01

    Adolescents are at a greater risk of being involved in traffic accidents than most other age groups, even before they start driving cars. This article aims to determine the factor structure of a self-report questionnaire measuring adolescent risky cycling behaviour, the ACBQ (Adolescent Cycling Behaviour Questionnaire). The questionnaire's structure was based on the widely used Driver Behaviour Questionnaire (DBQ). A sample of secondary school students (N = 1749; age range: 13-18 years) filled out the questionnaire. Factor analysis revealed a three-factor structure underlying the questionnaire, which was confirmed on two equally large portions of the entire sample. These three underlying factors were identified as errors, common violations and exceptional violations. The ACBQ is a useful instrument for measuring adolescents' risky cycling behaviour.

  15. Corporate governance cycles during transition

    DEFF Research Database (Denmark)

    Mygind, Niels; Demina, Natalia; Gregoric, Aleksandra

    2004-01-01

    -ing or exit stage. During transition the cycle reflects: privatization often with a high proportion of employee ownership like in Russia and in Slovenia; strong pressures for restructuring and owner-ship changes; limited possibility for external finance because of embryonic development of the fi......-nancial system. To provide simple hypothesis tests, we use Russian enterprise data for 1995-2003 and Slovenian data covering 1998-2003. In spite of differences in institutional development, con-cerning privatization and development of corporate governance institutions, we find that govern-ance cycles are broadly...... of ownership on managers, external domestic and foreign owners. JEL-codes: G3, J5, P2, P3 - Keywords: corporate governance, life-cycle, privatization, ownership change, transition economies, Russia and Slovenia....

  16. Volatile earliest Triassic sulfur cycle

    DEFF Research Database (Denmark)

    Schobben, Martin; Stebbins, Alan; Algeo, Thomas J.

    2017-01-01

    model experiment. Exposure of evaporite deposits having a high δ 34S may account for the source change, with a possible role for the Siberian Traps volcanism by magmatic remobilization of Cambrian rock salt. A high sulfur cycle turnover rate would have left the ocean system vulnerable to development......Marine biodiversity decreases and ecosystem destruction during the end-Permian mass extinction (EPME) have been linked to widespread marine euxinic conditions. Changes in the biogeochemical sulfur cycle, microbial sulfate reduction (MSR), and marine dissolved sulfate concentrations during...... fractionation and point to a more universal control, i.e., contemporaneous seawater sulfate concentration.The MSR-trend transfer function yielded estimates of seawater sulfate of 0.6-2.8mM for the latest Permian to earliest Triassic, suggesting a balanced oceanic S-cycle with equal S inputs and outputs...

  17. Cell growth and division cycle

    International Nuclear Information System (INIS)

    Darzynkiewicz, Z.

    1986-01-01

    The concept of the cell cycle in its present form was introduced more than three decades ago. Studying incorporation of DNA precursors by autoradiography, these authors observed that DNA synthesis in individual cells was discontinuous and occupied a discrete portion of the cell life (S phase). Mitotic division was seen to occur after a certain period of time following DNA replication. A distinct time interval between mitosis and DNA replication was also apparent. Thus, the cell cycle was subdivided into four consecutive phases, G/sub 1/, S, G/sub 2/, and M. The G/sub 1/ and G/sub 2/ phases represented the ''gaps'' between mitosis and the start of DNA replication, and between the end of DNA replication and the onset of mitosis, respectively. The cell cycle was defined as the interval between the midpoint of mitosis and the midpoint of the subsequent mitosis of the daughter cell(s). The authors' present knowledge on the cell cycle benefited mostly from the development of four different techniques: autoradiography, time-lapse cinematography, cell synchronization and flow cytometry. Of these, autoradiography has been the most extensively used, especially during the past two decades. By providing a means to analyse incorporation of precursors of DNA, RNA or proteins by individual cells and, in combination with various techniques of cell synchronization, autoradiography yielded most of the data fundamental to the current understanding of the cell cycle-related phenomena. Kinetics of cell progression through the cell cycle could be analysed in great detail after development of such sophisticated autoradiographic approaches as measurements of the fraction of labeled mitoses (''FLM curves'') or multiple sequential cell labelling with /sup 3/H- and /sup 14/C-TdR

  18. Partaking in cycling, at what cost? : determinants of cycling expenses

    NARCIS (Netherlands)

    Thibaut, E.; Vos, S.B.; Lagae, W.; Van Puyenbroeck, T.; Scheerder, J.

    2016-01-01

    This study analyses the determinants of cycling expenditure by means of a Tobit regression analysis, based on a dataset of 5,157 cyclists. Using a heterodox economic framework, 23 different variables are combined into two commonly used variable groups (socio-demographics, sports intensity variables)

  19. Life Cycle Costing: An Introduction

    DEFF Research Database (Denmark)

    Rödger, Jan-Markus; Kjær, Louise Laumann; Pagoropoulos, Aris

    2018-01-01

    The chapter gives an introduction to life cycle costing (LCC) and how it can be used to support decision-making. It can form the economic pillar in a full life cycle sustainability assessment, but often system delimitations differ depending on the goal and scope of the study. To provide a profound...... as well as guidance on how to collect data to overcome this hurdle. In an illustrative case study on window frames, the eLCC theory is applied and demonstrated with each step along the eLCC procedure described in detail. A final section about advanced LCC introduces how to monetarise externalities and how...

  20. Menstrual cycle and skin reactivity

    DEFF Research Database (Denmark)

    Agner, T; Damm, P; Skouby, S O

    1991-01-01

    The hypothesis was tested that a cyclic variation exists in skin reactivity to irritant stimuli. Twenty-nine healthy women with regular menstrual cycles were challenged with sodium lauryl sulfate as an irritant patch test at day 1 and at days 9 through 11 of the menstrual cycle. The skin response...... to the applied irritant stimulus was evaluated by visual scoring and also quantified by measurements of transepidermal water loss, edema formation, and blood flow in the skin. The skin response to challenge with sodium lauryl sulfate was found to be significantly stronger at day 1 than at days 9 through 11...

  1. Business Cycles in Developing Countries

    DEFF Research Database (Denmark)

    Rand, John; Tarp, Finn

    2002-01-01

    This paper demonstrates that developing countries differ considerably from their developed counterparts when focus is on the nature and characteristics of short run macroeconomic fluctuations. Cycles are generally shorter, and the stylized facts of business cycles across countries are more diverse...... than those of the rather uniform industrialized countries. Supply-side models are generally superior in explaining changes in output, but a “one-size fits all” approach in formulating policy is inappropriate. Our results also illustrate the critical importance of understanding business regularities...

  2. ITER fuel cycle systems layout

    International Nuclear Information System (INIS)

    Kveton, O.K.

    1990-10-01

    The ITER fuel cycle building (FCB) will contain the following systems: fuel purification - permeator based; fuel purification - molecular sieves; impurity treatment; waste water storage and treatment; isotope separation; waste water tritium extraction; tritium extraction from solid breeder; tritium extraction from test modules; tritium storage, shipping and receiving; tritium laboratory; atmosphere detritiation systems; fuel cycle control centre; tritiated equipment maintenance space; control maintenance space; health physics laboratory; access, access control and facilities. The layout of the FCB and the requirements for these systems are described. (10 figs.)

  3. [Menstrual cycle disorders in adolescence].

    Science.gov (United States)

    Escobar, María E; Pipman, Viviana; Arcari, Andrea; Boulgourdjian, Elisabeth; Keselman, Ana; Pasqualini, Titania; Alonso, Guillermo; Blanco, Miguel

    2010-08-01

    The high prevalence of menstrual disorders during the first years after menarche is well recognized. This is usually a cause of concern for parents and patients, and a common reason for visiting the pediatrician. The immaturity of the hypothalamic-pituitary-ovarian axis is the major cause of these disorders, but there are also some general organic or emotional conditions that may alter the menstrual cycle, which is a sensitive indicator of health. Physiology of the menstrual cycle, its alterations, etiology, assessment, diagnosis and treatment are reviewed in this article.

  4. Ramsey Results for Cycle Spectra

    DEFF Research Database (Denmark)

    Brandt, S.; Joos, F.; Muttel, J.

    2013-01-01

    Let C(G) denote the set of lengths of cycles of a graph G of order n and let (G) over bar denote the complement of G. We show that if n >= 6, then C(G) boolean OR C((G) over bar) contains all odd l with 3......Let C(G) denote the set of lengths of cycles of a graph G of order n and let (G) over bar denote the complement of G. We show that if n >= 6, then C(G) boolean OR C((G) over bar) contains all odd l with 3...

  5. Digital calculations of engine cycles

    CERN Document Server

    Starkman, E S; Taylor, C Fayette

    1964-01-01

    Digital Calculations of Engine Cycles is a collection of seven papers which were presented before technical meetings of the Society of Automotive Engineers during 1962 and 1963. The papers cover the spectrum of the subject of engine cycle events, ranging from an examination of composition and properties of the working fluid to simulation of the pressure-time events in the combustion chamber. The volume has been organized to present the material in a logical sequence. The first two chapters are concerned with the equilibrium states of the working fluid. These include the concentrations of var

  6. Fuel cycle math - part two

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This article is Part 2 of a two part series on simple mathematics associated with the nuclear fuel cycle. While not addressing any of the financial aspects of the fuel cycle, this article does discuss the following: conversion between English and metric systems; uranium content expressed in equivalent forms, such as U3O8, and the method of determining these equivalencies; the uranium conversion process, considering different input and output compounds; and the enrichment process, including feed, tails, and product assays, as well as SWU and feed requirements

  7. Sistem Pakar Otomatisasi Baku Mutu Limbah Pertambangan Nikel Menggunakan Algoritma Supervised Mechine

    Directory of Open Access Journals (Sweden)

    Komang Aryasa

    2016-09-01

    Full Text Available Metode buka tutup pintu pembuangan limbah secara manual  berdasarkan hasil uji laboratorium  membutuhkan waktu relatif lama. Ketika hasil uji laboratorium menyatakan proses pembuangan harus dihentikan, limbah yang tidak memenuhi standar kelayakan sudah ikut terbuang. Tujuan dari penelitian ini adalah  untuk merancang sistem pakar menggunakan algoritma Supervised Learning untuk otomatisasi standar baku limbah pertambangan nikel, algoritma ini digunakan untuk mengklasifikasikan besaran nilai kandungan unsur dalam limbah, dan digunakan untuk mengoptimalkan proses penentuan kelayakan buang limbah. Algoritma ini bekerja setelah menerima data dalam bentuk nilai-nilai kandungan unsur yang dibangkitkan oleh sebuah aplikasi simulator yang mendeteksi kadar kandungan unsur dalam air limbah. Hasil analisis tersebut digunakan untuk menentukan kelayakan pembuangan limbah. Dari 11 unsur yang dianalisis tujuh unsur memiliki bobot nilai tertinggi dalam setiap pengukuran yaitu pH, TSS, Cu, Zn, Cr(6+, Cr Total, dan Fe., sementara Support Vector Machine hanya empat unsur yang memiliki nilai bobot tertinggi dari setiap pengukuran, yaitu unsur Cd, Pb, Ni dan Co.

  8. Penentuan persentase transmisi eritema dan pigmentasi beberapa minyak atsiri

    Directory of Open Access Journals (Sweden)

    Widji Soeratri

    2012-02-01

    Full Text Available Prolonged and repetitive skin exposure to the sunlight can cause several disadvantageous effects. The harmful UV radiation of sunlight includes UV-A, which is implicated in tanning, photo aging and UV-B, which is especially responsible for erythema. For protecting the skin against UV light, the pharmaceutical sunscreen products with several active ingredients include natural productessential oils are used. In this experiment we have investigated the effect of several essential oils as protection of the skin against UV light. The essential oil that used in this experiment were Lavender oil, Kenanga oil, Nilam oil, Geranium oil, Rosemary oil, Neroli oil, and Rose Moroccan oil. The sunscreen effectiveness determination was performed in vitro by determine their percentage of erythema transmission and percentage of pigmentation transmission employed spectrophotometer at wavelength 292.5–372.5 nm. The results showed only lavender oil was effective as sunscreen with the percentage of erythema transmission and percentage of pigmentation transmission was 9.94% and 80.15%, respectively. It was categories as suntan.

  9. Penggunaan Model Binomial Pada Penentuan Harga Opsi Saham Karyawan

    Directory of Open Access Journals (Sweden)

    Dara Puspita Anggraeni

    2015-11-01

    Full Text Available Binomial Model for Valuing Employee Stock Options. Employee Stock Options (ESO differ from standard exchange-traded options. The three main differences in a valuation model for employee stock options : Vesting Period, Exit Rate and Non-Transferability. In this thesis, the model for valuing employee stock options discussed. This model are implement with a generalized binomial model.

  10. ANALYTIC HIERARCHY PROCESS (AHP UNTUK PENENTUAN RANGKING PENGGUNAAN LAHAN

    Directory of Open Access Journals (Sweden)

    Anita Theresia Kurniawati

    2017-09-01

    Full Text Available In urban spatial planning, the Local Government prioritizes land use to support planning development. The use of available land in an area must be adjusted to the function. So far, sometimes in an area the use of available land in an area does not fit with its function. Therefore, in this research will be determined the priority and ranking of land use by using Analytic Hierarchy Process (AHP. Ranking is based on four aspect criterias: social demography, economic, spatial and regional plan (RTRW, and environmental aspect. Based on the alternatives and criteria and also subcriteria, the decision hierarchy model is made. Then it will be assessed for the comparison between criterias and subcriterias and their consistency value. The result is achieved by using Expert Choice software version 11 and analysis, it showed that the main priority of land allocation in Sidoarjo regency was used as agricultural land (31.9%.

  11. PENDEKATAN MATEMATIS DALAM PENENTUAN WAKTU EFEKTIF PERTUMBUHAN TANAMAN CABAI MERAH

    Directory of Open Access Journals (Sweden)

    N.W. SURYAWARDHANI

    2012-11-01

    Full Text Available Mathematical Model in Determining Effective Time for Growth Rate of Red Chili The growth rate showed a sigmoidal shaped pattern with initially slow growth rate and speeding up till a certain period before slowing down to approach a limit. So it is very important to define the plant growth model. The aim of the study is to estimate the effective time of plant growth by looking at the mathematical model. The statistical analysis showed that the growth ofCapsium annum Cult. Hot Beauty’s can be fit well by Janoscheck model and the effective growth time occurs as the plant is in the interval of 14 to 21 days after transplanting.

  12. Penentuan Kriteria Pemilihan Strategi Sistem Manufaktur Menggunakan Analytic Hierarchy Process

    Directory of Open Access Journals (Sweden)

    Apriani Soepardi

    2012-01-01

    Full Text Available This paper presents the decision making process for the selection of criteria manufacturing system using AHP. The accuracy of the selection strategy is based on many criteria that termed as agility capabilities. Several influential criteria that is used in the selection are responsiveness, product quality, product cost, operator skills, and inventory. From these criteria, manufacturing responsiveness has the highest priority weight. On these criteria, the company cast metal is required to have the agility capabilities in reduction of lead-time for product development, new product introduction, and a wide variety of products. While the criteria for product quality takes places at second priority, followed by product cost, operator skill and inventory. From agility capability priorities that must be owned by the company of cast metal, the manufacturing system according to the characteristics of the organization and be able to respond appropriately to environmental changes is lean manufacturing system.

  13. Loyalitas Merek Dasar Strategi Penentuan Harga (sebuah Kajian)

    OpenAIRE

    Indarwati, Iin

    2010-01-01

    Consumer loyalty to the brand has many levels, from the lowest to the loyalty of the highest loyalty. The higher the brand loyalty of an increasingly difficult consumer is influenced by various factors including the price. In determining the price of the product, particularly change in prices for products which are well known, need to see the success factors that will affect the pricing. In addition to costs and profits, to consider psychological factors including levels of consumer loyalty. ...

  14. PEMANFAATAN ANTROPOMETRI GIZI UNTUK PENENTUAN SASARAN PROGRAM PENANGGULANGAN KEMISKINAN

    Directory of Open Access Journals (Sweden)

    Herman Sudirman

    2012-11-01

    Full Text Available THE USE OF NUTRITIONAL ANTHROPOMETRICS DATA FOR TARGETING OF POVERTY ALLEVIATION PROGRAM.Background: In limited fund situation and increased of poor population, the selection of the targets of poverty alleviation program becomes very important The precise targeting means save the fund and help the needy household. Based on the experiences in poverty alleviation program generally the weaknesses are selecting the targets. Nutritional anthropometrics data are available but they are not optimally use to support the poverty alleviation program. Studies on anthropometries data and their correlation with social-economic data, recipient from other poverty alleviation program can help to select the targets.Objective: To study the agreement of nutritional indicator with other indcator to select targets for poverty alleviation program.Method: Research was conducted at 4 districts in West Java. At each district was chosen 2 sub districts with the highest proportion of poverty household and with the same method in each sub district 1 village were chosen. In each village were choose randomly 80 families. The entire household member was measure on their weight and height. Other data was collect by interview and observation. Agreement test was performed to test on the targeting done by the poverty alleviation program such as Social Safety Net program with nutritional anthropometrics indicator.Conclusions: 1. Based on the occupation, education and income estimation of household head, generally household samples were categorized as poor and deserve to be the target of the program. 2. Data of recipient from religious organization until the end of the research cannot be collected so it cannot be analyze. 3. Body Mass Index (BMI of household head and wife less than 18,5 kg/m2 has high agreement for targeting. 4. Anthropometrics indcator of children under 5 years using cut off point <-2 Z score and <-3 Z score have high agreement to targeting, except for weight-for-height using cut off point <-3 Z score.Key Words: poverty indicator, anthropometrics, agreement of indicator

  15. PENENTUAN NILAI TUKAR: PENGUJIAN PURCHASING POWER PARITY DI INDONESIA

    Directory of Open Access Journals (Sweden)

    Sri Yani Kusumastuti

    2016-11-01

    PPP to data drawn from the period 1969.1 through 2001.4. The tests are also run for sub-periods. Symmetry and proportionality restrictions find little support for the unit root tests though the Johansen test suggests that foreign exchange rate and inflation rate are linked in a long run sense. Error correction models are then estimated on the basis of the assumption that the United States inflation rate is exogenous. The error correction models result also rejects the PPP. Keywords: purchasing power parity, exchage rate

  16. Sistem Pendukung Keputusan Kelompok Penentuan Kelayakan Lokasi Pemukiman

    Directory of Open Access Journals (Sweden)

    Mutammimul Ula

    2013-01-01

    Abstrak As a disaster-prone areas of the tsunami, ocean waves and abrasion, it takes a decent location to be used as a residential area to support economic development, infrastructure, social and economic development of Regional Goverment of Lhokseumawe. Therefore, it is necessary to have feasibility determination of viable residential locations as recommendation to be a settlement. So it is necessary to evaluate the physical area of settlements, infrastructure, economic and social development that will be recommended to be a residential location. Public suggestion is needed to determine the problem locations to be recommended to a settlement. The application of group decision support systems or Group Decision Support System (GDSS are made using the VIKOR method (Vlse Kriterijumska Optimizacija Kompromisno Resenje in Serbia that is able to assist decision makers in the ranking value to each solution alternatives, entropy wih weigt for criterias, the method of Copeland score, as one method of voting is the technique by reducing the frequency of victory with the defeat of the comparison frequency pairs can be used to vote for a solution that will take the decision makers.   Keyword— GDSS, Vikor, Copeland Score, Entropy, location determination.

  17. Penentuan Nilai Kalor Briket Dengan Memvariasikan Berbagai Bahan Baku

    Directory of Open Access Journals (Sweden)

    Samsinar Samsinar

    2016-07-01

    Full Text Available Limitations of the availability of non-renewable energy sources. Cocoa shell waste and sawdust widespread everywhere and can be used as an alternative energy source that is to cultivate and make fuel, one of which briquetting. The composition of the material that is (90: 10 75: 25 and 50: 50. After mixing the briquettes are printed using a printer briquettes. From this study, the best calorific value contained in the ratio of sawdust 90: Water Hyacinth 10 is 6223.20 cal/g, the ratio of sawdust 90: 10 cocoa skin is 5953.72 cal / g and Leather Cocoa 90 : Water Hyacinth 10 ie 6066, 09 cal/g. The best density value in comparison sawdust: cocoa skin (75:25 ie 1.05 kg/cm3. Best values compressive strength in comparison cocoa skin: water hyacinth (50:50 ie 2.32 kg/cm3. Best water content ratio of sawdust : water hyacinth (90 : 10 ie 3. 89% ash content. Value best comparison Leather cocoa : water hyacinth (90 : 10 is 0.66%. Volatile matter best value comparison cocoa skin: water hyacinth (90:10 ie 13.1%. The best comparison value of fixed carbon sawdust: cocoa skin (90 :10 is 62,34 %.

  18. Penentuan Rute Pengiriman Pupuk Urea Bersubsidi di Karanganyar

    Directory of Open Access Journals (Sweden)

    Yusuf Priyandari

    2011-01-01

    Full Text Available This paper develops a vehicle routing problem (VRP model for determining the routes in urea fertilizer distribution from a depot to retailers. The distribution is done in work days which uses trucks, each truck can serve more than one route (multiple trips, and each retailer has a time window. The vehicle routing model is built in a mixed integer linear programming (MILP and the objective function is minimizing total transportation cost. The distances from the distributor to retailers and inter-retailers do not use Euclidian approach but the road network on a digital map in order to make the route solution is more realistic. Historical distribution data was used to test the model. The result shows that the model can minimize the cost about 2.28% which is compared to the original routes.

  19. PENENTUAN CADANGAN PREMI DENGAN PERHITUNGAN PROSPEKTIF UNTUK ASURANSI PENDIDIKAN

    OpenAIRE

    ANGGIE EZRA JULIANDA HUTAPEA; I NYOMAN WIDANA; LUH PUTU IDA HARINI

    2018-01-01

    The purpose of this research is to get formula to calculate premium reserve value with prospective calculation for education insurance. This study examines the value of premium reserves for people aged 40 years with a coverage period of 17 years. In determining the value of premium reserve using the prospective calculation. It will be started by completing the value of the Indonesian Mortality Table 2011 using the interest rate of 6.5%, calculating the cash value of the benefit, the annuity v...

  20. PENENTUAN CADANGAN PREMI DENGAN PERHITUNGAN PROSPEKTIF UNTUK ASURANSI PENDIDIKAN

    Directory of Open Access Journals (Sweden)

    ANGGIE EZRA JULIANDA HUTAPEA

    2018-05-01

    Full Text Available The purpose of this research is to get formula to calculate premium reserve value with prospective calculation for education insurance. This study examines the value of premium reserves for people aged 40 years with a coverage period of 17 years. In determining the value of premium reserve using the prospective calculation. It will be started by completing the value of the Indonesian Mortality Table 2011 using the interest rate of 6.5%, calculating the cash value of the benefit, the annuity value, the net annual premium value, and the net monthly premium value. The results of this study indicate that the value of premium reserves with a prospective calculation for benefits paid at the end of the year and the premium reserve value for benefits paid at the time the insured dies, its value with the value of the cash price set by the insurer at the end of year- 17 on the insurance contract.

  1. Penentuan Portofolio Investasi Optimal Dengan Menggunakan Persamaan Diferensial Stokastik

    OpenAIRE

    Saragi, Desi Natalia

    2016-01-01

    In investing, the investors choose to invest their wealth in various financial assets both on the risky assets either on the risk-free assets. Generally, those financial assets are formed into a portfolio. Portfolio theory discuss how to establish an optimal portfolio. In determining the optimal investment, at first the investation which had Stochastic Differential Equations (SDE) will be modeled. The model is solved by Ito‟s lemma then by using optimal control theory with utility function ap...

  2. ANALISIS INTANGIBLE FACTORS YANG MEMPENGARUHI PENENTUAN HARGA PRODUK KARYA SENI

    Directory of Open Access Journals (Sweden)

    Kusriniarti Dwi Lestariningsih

    2012-12-01

    Full Text Available This research aims to develop a new quantitative method to determine painting pricing based on 10 intangible factors, i.e. curator, amount of exhibition, painter’s year of birth, painting’s years of made, auction record,estimation price, exhibition place, painting media, painting size, and previous sales record. The selling price data are obtained from six auction houses. Kano Model and Linear Regression Model are used to examine the relationbetween pricing and each variable. Based on the model development scheme, there are 6 alternative models that can be obtained. Each model then was evaluated by cross-validation procedure using 21 data. Based on the value of R2for each model, the Kano Model with variable previous sales is the best model with R2 of 70%

  3. PENENTUAN MODEL PREMI TIDAK KONSTAN PADA ASURANSI DANA PENSIUN

    Directory of Open Access Journals (Sweden)

    LIA JENITA

    2016-01-01

    Full Text Available Pension plan is an effort to anticipate the life of old on the day. In the pension program, there are two methods of normal due’s calculation to be paid by the insured each year, the Entry Age Normal method, namely calculation of normal dues with constant premiums and projected unit credit method, namely calculation of normal dues with Premium Increases Each year or is not constant. This paper wants to develop an inconstant premium calculation method with constant premium increase annually. Where the pension plan participants’ age when he joined the pension plan is 19 years and the retirement age on this contract is 55 years, with premium increases of 5% of the normal dues early. The large ratio of premiums is, for dues normal at the age of 19 years until the age of 28 years, but for dues normal at the age of 29 years to the age of 33 years and to normal dues at the age of 34 years old until the age of one year before retirement.

  4. Penentuan Nilai Opsi Call Eropa Dengan Pembayaran Dividen

    Directory of Open Access Journals (Sweden)

    Diana Purwandari

    2016-08-01

    Full Text Available Fluktuasi harga saham menyebabkan perdagangan saham memiliki resiko. Opsi merupakan alternatif untuk mengurangi resiko dalam perdagangan saham. Opsi Eropa adalah suatu kontrak keuangan yang memberikan hak, bukan kewajiban, kepada holder, untuk membeli atau menjual aset pokok dari writer pada saat jatuh tempo dengan harga yang sudah ditentukan. Model penilaian harga opsi yang banyak diterima dalam bidang finansial adalah model Black-Scholes. Tujuan dari penelitian ini adalah mengetahui pengaruh pembagian dividen terhadap harga saham dan menentukan nilai opsi call Eropa dengan pembayaran dividen pada waktu yang telah ditentukan. Nilai opsi call Eropa dengan pembayaran dividen pada waktu yang telah ditentukan diperoleh menggunakan integrasi numerik dengan metode Simpson sebesar 12,6388.Kata kunci: opsi call Eropa, model Black-Scholes, dividen, metode Simpson.ABSTRACT Fluctuations in stock prices lead stock trading risk. An alternative options to reduce the risk in stock trading. European option is a financial contract that gives the right, but not the obligation, to the holder, to buy or sell the underlying asset of the writer at the maturity date at a price specified. Option price valuation models are widely accepted in the field of finance is the Black-Scholes model. The purpose of this study is to determine the effect of dividend distribution to the stock price and determine the value of the European call option with dividend payments at a predetermined time. Value of the European call option with dividend payments at a predetermined time obtained using numerical integration with Simpson method of 12,6388.Key words: European call options, Black-Scholes model, dividend, Simpson method.

  5. Penentuan Konsentrasi Tanah dalam Air Sungai Berdasarkan Perbedaan Warna

    Directory of Open Access Journals (Sweden)

    Imam Sofi'i

    2008-08-01

    Full Text Available Information of soil erosion is very useful related with prevention action and planning in the future. The objective of this research is to determine soil concentration in water river based on colour differences using image processing and artificial neural network (ANN. Soil and water mixture image was taken using a digital camera then was processed by an image processing program. Two ANN Models were developed. The first model had 3 input parameters while the second model had 6 input parameters. Both models had altogether one output parameters of the soil concentration. The accuracy of the first model was 38% while the second one was 36%.

  6. Penelitian penentuan konstanta saturasi (Ks pada rbc unit

    Directory of Open Access Journals (Sweden)

    Prayitno Prayitno

    1992-04-01

    Full Text Available Kinetic of Rotating Biological Contractor have been investigated by manu researchers. In general the model emploued either saturation kinetic (following Monod equation or first order kinetic to describe substrate removal. In this experiment, saturation kinetic model was used to find out the saturation constant of the RBC unit. The influent fed into the unit was synthetic waste water with glucose as organic carbon sources. The flow was maintained constant at 20.4 1/d and COD influent resulted the saturation constant (Ks 11.17 mg/I with 20 hours of detention time.

  7. Penentuan Harga Jual Amplang pada Anisa Amplang di Samarinda

    OpenAIRE

    Elfreda Aplonia Lau, Zahrah Bibi. M, Lca. Robin Jhonathan

    2015-01-01

    The purpose of this study was to determine the percentage increase in selling price per pack amplang set by Enterprises. Formulation of the problem in this study Is amplang pricing sell for Rp 10,000, - per set Ons Enterprises Anisa has a 17.5% gain. Basic theory of management accounting is used, the hypothesis in this study that the percentage increase in the selling price set by Anisa Enterprises using mark-up wisdom greater than 17.5%Based on the results of the analysis and discussion:Cost...

  8. PENENTUAN KOEFISIEN TRANSFER MASSA EKSTRAKSI KALIUM DARI ABU BATANG PISANG

    Directory of Open Access Journals (Sweden)

    Primata Mardina

    2012-10-01

    Full Text Available Potassium is the one of chemical compounds which can be extracted from ash of pseudo stem of banana by methanol solid-liquid extraction method. The experiment investigated the effect of temperature on mass transfer coefficient of potassium extraction process from ash of banana’s pseudo stem. This experiment conducted in a three necks flask which equipped with mechanical stirrer, condenser, thermometer and heating mantle. The sample was heated to desired temperature, 30oC, 45 oC and 60 oC. and maintained constant while reaction time. The reaction was timed as soon as the mechanical stirrer was turned on. Samples were drawn at specified time interval 0, 15, 30, 60, 120, 180 and 240 minutes. The result showed increasing temperature increased mass-transfer coefficient. The highest value of mass-transfer coefficient was 0,0235 /minute at 60oC.The correlation between mass transfer coefficient and investigated variables is shown in the dimensionless equation below: The average error is 6.56 %

  9. Penentuan Titik Lokasi Pelabuhan Penyeberangan Amed Di Kabupaten Karangasem

    Directory of Open Access Journals (Sweden)

    I Gusti Ngurah Putra Dirgayusa

    2016-07-01

    Full Text Available Accumulation of social activity, economy and transportation that occur in Southern part of Bali adversely affects at transportation infrastructure carrying activity in this area. These require the government to get the solution of this problem. Through spatial planning area of Bali province 2005, governments establish Amed Bay developed as crossing harbor. These cases mean to divide the shout hem traffic line and support the development in northern part of Bali. The object of this research is in Purwakerti village, district of Abang, Karangasem regency. Research held based on technical and legality review. In advance analyze of those aspects that established some alterative potential location based on area requirement and mapping survey result. Following, each location alternative disassembly and examined their advantages and disadvantages in each aspect. Technical aspect analyze of land and territorial water technique. The approach that used in harbor location selection for this technique is weighting and assessment method in assessment matrix. The weighting value that used refers to harbor location selection in Makian bay. Meanwhile, for legality aspect, analyzed by policy review that relate to spatial area and location selection of harbor development. Based on minimum area demand analyze that 0.7 Ha for land facilities and 15.8 Ha for waters facilities. Refers to minimum area demand and layout spatial survey, four locations are selected for alternative points. After technical and legality aspect analyzed, then obtained second area chosen which located in Amed country, Purwakerti village.

  10. Pengaruh Faktor Panjang Kelerengan Terhadap Penentuan Awal Erosi Lahan

    Directory of Open Access Journals (Sweden)

    Teguh Marhendi

    2017-12-01

    ABSTRACT The soil characteristic is a determinan factor to erosion analysis. The changes of slope length was impact to amount of erosion. The research aim to study influence of a slope length  at erosion analysis. Pre- eliminary study was preparation the maps of soil kinds appropriate landuse to slope length analysis and then  determination the amount of erosion by USLE formulation. The C and K factor was determination with soil maps and landuse and rainfall data  at 1988 to 2008. The result of research shown that the slope length  was influence to changes the amount of erosion   Keyword: Merawu Basin,  The slope length, erosion

  11. Penerapan Algoritma Genetika Dalam Penentuan Tata Letak Ruang

    OpenAIRE

    Yanda, Rizky

    2014-01-01

    During the making of the basic plan of the home often have difficulty, especially for estimating the layout of each room. Genetic Algorithm can produce a layout that is considered based on space needs. With this system, the ground-plan of making a home can be more convenient and practical. In general, the system can provide a layout results in a land space as expected 081402024

  12. PENENTUAN AGROINDUSTRI BERBASIS JAGUNG TERPILIH DI PROVINSI LAMPUNG

    Directory of Open Access Journals (Sweden)

    Sri Mulyani Widyanti

    2012-12-01

    Full Text Available Most of the corn produced in Lampung Province is utilized for feed. The farmers sell the corn seed in  a market where the price is fluctuated. So far, the  number of business people in feed industry are still low, therefore the corn itself is still not fully exploited. This study was aimed to select the proper type of agro-industry for Lampung Province which was analyzed using Hierarchy Analysis Process, specifying the location of selected agro-industries by using Exponential Comparative Method. In this research, we used the research survey, data collected includes primary data and secondary data by the method of quantitative analysis and qualitative descriptive. By using hierarchy analysis process, the proper agro-industry for Lampung province is corn flour. Then, by using exponential comparison method, the proper place for developing the corn flour industry is in East Lampung regency specifically in Sribhawono. Corn flour industry viable market assessed with consideration of market opportunities to reach 35% corn flour that is equal to 1.533 million tones. The production process is done using wet and dry production methods. Based on the calculation of costs and production capacity , the sale price of the corn flour is Rp. 5800, - per kilogram.

  13. Penerapan Sampling Kerja dalam Penentuan Beban dan Kebutuhan Tenaga Kerja

    Directory of Open Access Journals (Sweden)

    Suryat Handoko

    2017-10-01

    Full Text Available PT Semen Padang is one of the subsidiaries of PT Semen Indonesia Tbk, which is one of the state-owned enterprises engaged in the business of cement production and trade. PT Semen Padang is now actively promoting synergies and pursuing the company's performance growth to be able to cope with competition in an increasingly tight and complex cement industry. In order to face this, it is necessary to have adequate human resource management from the company. One of the successes of company’s management is the availability of sufficient human resources with high quality, have integrity, professional in accordance with the functions and tasks of each personal and work unit. Since 2015, there has been an increase in overtime hours. This is due to the shortage of employees of PT Semen Padang. The reason is the number of employees who retired and there is no recruitment. Thus, there are some tasks that have not been implemented. In addition, in May 2016 one of the KPI's timely procurement points in the spare parts field was not achieved. Therefore, it is necessary to investigate the workload of employees and give a recommendation of the optimal employee needs for this bureau in the future. The study found that Buyer Bureau Procurement of goods PT Semen Padang has only 74.4% productive work time. It is because the actual number of buyers for the spare parts field is 6 people, while the number of buyers optimal based on the calculation is 8 people.

  14. Model Penentuan Nilai Target Functional Requirement Berbasis Utilitas

    Directory of Open Access Journals (Sweden)

    Cucuk Nur Rosyidi

    2012-01-01

    Full Text Available In a product design and development process, a designer faces a problem to decide functional requirement (FR target values. That decision is made under a risk since it is conducted in the early design phase using incomplete information. Utility function can be used to reflect the decision maker attitude towards the risk in making such decision. In this research, we develop a utility-based model to determine FR target values using quadratic utility function and information from Quality Function Deployment (QFD. A pencil design is used as a numerical example using quadratic utility function for each FR. The model can be applied for balancing customer and designer interest in determining FR target values.

  15. IAEA activities on nuclear fuel cycle 1997

    International Nuclear Information System (INIS)

    Oi, N.

    1997-01-01

    The presentation discussing the IAEA activities on nuclear fuel cycle reviews the following issues: organizational charts of IAEA, division of nuclear power and the fuel cycle, nuclear fuel cycle and materials section; 1997 budget estimates; budget trends; the nuclear fuel cycle programme

  16. IAEA activities on nuclear fuel cycle 1997

    Energy Technology Data Exchange (ETDEWEB)

    Oi, N [International Atomic Energy Agency, Vienna (Austria). Nuclear Fuel Cycle and Materials Section

    1997-12-01

    The presentation discussing the IAEA activities on nuclear fuel cycle reviews the following issues: organizational charts of IAEA, division of nuclear power and the fuel cycle, nuclear fuel cycle and materials section; 1997 budget estimates; budget trends; the nuclear fuel cycle programme.

  17. Sourcing Life Cycle Inventory Data

    Science.gov (United States)

    The collection and validation of quality lifecycle inventory (LCI) data can be the most difficult and time-consuming aspect of developing a life cycle assessment (LCA). Large amounts of process and production data are needed to complete the LCI. For many studies, the LCA analyst ...

  18. Fuel cycle management in Finland

    International Nuclear Information System (INIS)

    Vaeyrynen, H.; Mikkola, I.

    1987-01-01

    Both Finnish utilities producing nuclear power - Imatran Voima Oy (IVO) and Teollisuuden Voima Oy (Industrial Power Co. Ltd, TVO) - have created efficient fuel cycle management systems. The systems however differ in almost all respects. The reason is that the principal supplier for IVO is the Soviet Union and for TVO is Sweden. A common feature of both systems at the front end of the cycle is the building of stockpiles in order to provide for interruptions in fuel deliveries. Quality assurance supervision at the fuel factory for IVO is regulated by the Soviet Chamber of Commerce and Industry and a final control is made in Finland. The in-core fuel management is done by IVO using codes developed in Finland. The whole IVO fuel cycle is basically a leasing arrangement. The spent fuel is returned to the USSR after five years cooling. TVO carries out the in-core fuel management using a computer code system supplied by Asea-Atom. TVO is responsable for the back end of the cycle and makes preparations for the final disposal of the spent fuel in Finland. 6 refs., 2 figs

  19. Heteroclinic cycles between unstable attractors

    International Nuclear Information System (INIS)

    Broer, Henk; Efstathiou, Konstantinos; Subramanian, Easwar

    2008-01-01

    We consider networks of pulse coupled linear oscillators with non-zero delay where the coupling between the oscillators is given by the Mirollo–Strogatz function. We prove the existence of heteroclinic cycles between unstable attractors for a network of four oscillators and for an open set of parameter values

  20. Heteroclinic cycles between unstable attractors

    NARCIS (Netherlands)

    Broer, Henk; Efstathiou, Konstantinos; Subramanian, Easwar

    We consider networks of pulse coupled linear oscillators with non-zero delay where the coupling between the oscillators is given by the Mirollo-Strogatz function. We prove the existence of heteroclinic cycles between unstable attractors for a network of four oscillators and for an open set of

  1. Hybrid cycles for micro generation

    International Nuclear Information System (INIS)

    Campanari, S.

    2000-01-01

    This paper deals with the main features of two emerging technologies in the field of small-scale power generation, micro turbines and Solid Oxide Fuel Cells, discussing the extremely high potential of their combination into hybrid cycles and their possible role for distributed cogeneration [it

  2. Romanian nuclear fuel cycle development

    International Nuclear Information System (INIS)

    Rapeanu, S.N.; Comsa, Olivia

    1998-01-01

    Romanian decision to introduce nuclear power was based on the evaluation of electricity demand and supply as well as a domestic resources assessment. The option was the introduction of CANDU-PHWR through a license agreement with AECL Canada. The major factors in this choice have been the need of diversifying the energy resources, the improvement the national industry and the independence of foreign suppliers. Romanian Nuclear Power Program envisaged a large national participation in Cernavoda NPP completion, in the development of nuclear fuel cycle facilities and horizontal industry, in R and D and human resources. As consequence, important support was being given to development of industries involved in Nuclear Fuel Cycle and manufacturing of equipment and nuclear materials based on technology transfer, implementation of advanced design execution standards, QA procedures and current nuclear safety requirements at international level. Unit 1 of the first Romanian nuclear power plant, Cernavoda NPP with a final profile 5x700 Mw e, is now in operation and its production represents 10% of all national electricity production. There were also developed all stages of FRONT END of Nuclear Fuel Cycle as well as programs for spent fuel and waste management. Industrial facilities for uranian production, U 3 O 8 concentrate, UO 2 powder and CANDU fuel bundles, as well as heavy water plant, supply the required fuel and heavy water for Cernavoda NPP. The paper presents the Romanian activities in Nuclear Fuel Cycle and waste management fields. (authors)

  3. The product life cycle revisited

    DEFF Research Database (Denmark)

    Ulhøi, John Parm

    1995-01-01

    Efter et introduktionsafsnit følger afsnit II, hvor der gives en historisk analyse af Life Cycle Assessment (LCA) og Environmental Impact Assessment (EIA). I afsnit III munder analysen ud i en vurdering af ligheder og forskelle mellem LCA analyser og EIA analyser, og en diskussion følger af...

  4. Business cycle synchronization in Europe

    DEFF Research Database (Denmark)

    Bergman, Ulf Michael; Jonung, Lars

    2011-01-01

    In this paper we study business cycle synchronization in the three Scandinavian countries Denmark, Norway and Sweden prior to, during and after the Scandinavian Currency Union 1873–1913. We find that the degree of synchronization tended to increase during the currency union, thus supporting earlier...

  5. Business Cycle Dependent Unemployment Insurance

    DEFF Research Database (Denmark)

    Andersen, Torben M.; Svarer, Michael

    The consequences of business cycle contingencies in unemployment insurance systems are considered in a search-matching model allowing for shifts between "good" and "bad" states of nature. We show that not only is there an insurance argument for such contingencies, but there may also be an incentive...

  6. Emissions from photovoltaic life cycles.

    Science.gov (United States)

    Fthenakis, Vasilis M; Kim, Hyung Chul; Alsema, Erik

    2008-03-15

    Photovoltaic (PV) technologies have shown remarkable progress recently in terms of annual production capacity and life cycle environmental performances, which necessitate timely updates of environmental indicators. Based on PV production data of 2004-2006, this study presents the life-cycle greenhouse gas emissions, criteria pollutant emissions, and heavy metal emissions from four types of major commercial PV systems: multicrystalline silicon, monocrystalline silicon, ribbon silicon, and thin-film cadmium telluride. Life-cycle emissions were determined by employing average electricity mixtures in Europe and the United States during the materials and module production for each PV system. Among the current vintage of PV technologies, thin-film cadmium telluride (CdTe) PV emits the least amount of harmful air emissions as it requires the least amount of energy during the module production. However, the differences in the emissions between different PV technologies are very small in comparison to the emissions from conventional energy technologies that PV could displace. As a part of prospective analysis, the effect of PV breeder was investigated. Overall, all PV technologies generate far less life-cycle air emissions per GWh than conventional fossil-fuel-based electricity generation technologies. At least 89% of air emissions associated with electricity generation could be prevented if electricity from photovoltaics displaces electricity from the grid.

  7. Nuclear fuel cycle. V. 1

    International Nuclear Information System (INIS)

    1983-01-01

    Nuclear fuel cycle information in the main countries that develop, supply or use nuclear energy is presented. Data about Japan, FRG, United Kingdom, France and Canada are included. The information is presented in a tree-like graphic way. (C.S.A.) [pt

  8. Melatonin, Light and Circadian Cycles

    Science.gov (United States)

    1989-12-25

    Neurosci Abstr 14:848. Fanget, F., Claustrat, B., Dalery, J., Brun, J., Terra , J-L, Marie-Cardine, M., and Guyotot, J. (1989) Nocturnal plasma melatonin...5- methoxytryptamine, a novel melatonin antagonist: effects on sexual matura - tion of the male and female rat and on uestrous cycles of the female rat

  9. (Auto)Ethnographies and Cycling

    DEFF Research Database (Denmark)

    Larsen, Jonas

    2014-01-01

    , habits and affective capacities of cycling are cultivated and performed. The article argues that autoethnography is particularly apt at illuminating the embodied qualities of movement, and it sits within established ethnographies of ‘excising’ and ‘mobile bodies’. In the second part of the article, I...

  10. Nuclear Fuel Cycle Introductory Concepts

    Energy Technology Data Exchange (ETDEWEB)

    Karpius, Peter Joseph [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-02-02

    The nuclear fuel cycle is a complex entity, with many stages and possibilities, encompassing natural resources, energy, science, commerce, and security, involving a host of nations around the world. This overview describes the process for generating nuclear power using fissionable nuclei.

  11. Menopause: A Life Cycle Transition.

    Science.gov (United States)

    Evarts, Barbara Kess; Baldwin, Cynthia

    1998-01-01

    Family therapists need to address the issue of menopause proactively to be of benefit to couples and families during this transitional period in the family life cycle. Physical, psychological, and psychosocial factors affecting the menopausal woman and her family, and ways to address these issues in counseling are discussed. (Author/EMK)

  12. Nuclear Fuel Cycle Introductory Concepts

    International Nuclear Information System (INIS)

    Karpius, Peter Joseph

    2017-01-01

    The nuclear fuel cycle is a complex entity, with many stages and possibilities, encompassing natural resources, energy, science, commerce, and security, involving a host of nations around the world. This overview describes the process for generating nuclear power using fissionable nuclei.

  13. Some thorium fuel cycle strategies

    International Nuclear Information System (INIS)

    Duret, M.F.; Hatton, H.

    1979-02-01

    The report deals with the problem of introducing an advanced nuclear fuel cycle based on thorium in Canada. It is pointed out that timing and introduction rate are important considerations, certain choices of these variables leading to undesirable business fluctuations in some of the industries involved in the production of nuclear energy. (author)

  14. Nuclear fuel cycle. V. 2

    International Nuclear Information System (INIS)

    1984-01-01

    Nuclear fuel cycle information in some countries that develop, supply or use nuclear energy is presented. Data about Argentina, Australia, Belgium, Netherlands, Italy, Denmarmark, Norway, Sweden, Switzerland, Finland, Spain and India are included. The information is presented in a tree-like graphic way. (C.S.A.) [pt

  15. Sustainable Building Life Cycle Design

    Directory of Open Access Journals (Sweden)

    Ginzburg Alexander

    2016-01-01

    Full Text Available The current building life cycle management system in the Russian Federation is a family of discrete subsystems that exist independently for different building life cycle stages. In this situation building reliability and sustainable functioning are out of the question. The implementation of a united information model (BIM-model intended to describe building entire life cycle will allow to raise the sustainability, but this will happen only if goals and concerns of all participants of the project process are properly coordinated. An important figure of process sustainability is the organizational and technological reliability (OTR that describes the possibility of a system to reach a goal. In case of building life cycle design, the economical efficiency of a building can be considered as the goal. The required technical, ecological, organizational, and other parameters form a complex of constraints that determine the area of allowable values for building functioning. In its broad meaning, OTR may be understood as the probability of receiving an economical effect based on the value of organizational and economical reliability (OER.

  16. Associations between urban form and cycling

    DEFF Research Database (Denmark)

    Nielsen, Thomas Alexander Sick; Olafsson, Anton Stahl; Carstensen, Trine Agervig

    of National Travel Survey data indicated that established walkability factors such as density, connectivity and diversity are related to cycling, and that access to retail concentrations/centres, public transportation level-of-service, as well as competition between walking and cycling depending...... of cycling and the distance cycled. A high probability of cycling generally implies short cycling distances, which leads to non-uniform, non-monotonous relations between environmental indicators such as walkability and total cycling. Further analysis of primary data allowing a consideration of attitudes...

  17. Modeling the Nuclear Fuel Cycle

    International Nuclear Information System (INIS)

    Jacobson, Jacob J.; Dunzik-Gougar, Mary Lou; Juchau, Christopher A.

    2010-01-01

    A review of existing nuclear fuel cycle systems analysis codes was performed to determine if any existing codes meet technical and functional requirements defined for a U.S. national program supporting the global and domestic assessment, development and deployment of nuclear energy systems. The program would be implemented using an interconnected architecture of different codes ranging from the fuel cycle analysis code, which is the subject of the review, to fundamental physical and mechanistic codes. Four main functions are defined for the code: (1) the ability to characterize and deploy individual fuel cycle facilities and reactors in a simulation, while discretely tracking material movements, (2) the capability to perform an uncertainty analysis for each element of the fuel cycle and an aggregate uncertainty analysis, (3) the inclusion of an optimization engine able to optimize simultaneously across multiple objective functions, and (4) open and accessible code software and documentation to aid in collaboration between multiple entities and facilitate software updates. Existing codes, categorized as annualized or discrete fuel tracking codes, were assessed according to the four functions and associated requirements. These codes were developed by various government, education and industrial entities to fulfill particular needs. In some cases, decisions were made during code development to limit the level of detail included in a code to ease its use or to focus on certain aspects of a fuel cycle to address specific questions. The review revealed that while no two of the codes are identical, they all perform many of the same basic functions. No code was able to perform defined function 2 or several requirements of functions 1 and 3. Based on this review, it was concluded that the functions and requirements will be met only with development of a new code, referred to as GENIUS.

  18. The economics of thorium fuel cycles

    International Nuclear Information System (INIS)

    James, R.A.

    1978-01-01

    The individual cost components and the total fuel cycle costs for natural uranium and thorium fuel cycles are discussed. The thorium cycles are initiated by using either enriched uranium or plutonium. Subsequent thorium cycles utilize recycled uranium-233 and, where necessary, either uranium-235 or plutonium as topping. A calculation is performed to establish the economic conditions under which thorium cycles are economically attractive. (auth)

  19. Emerging market business cycles: the cycle is the trend

    OpenAIRE

    Mark Aguiar; Gita Gopinath

    2004-01-01

    Business cycles in emerging markets are characterized by strongly counter-cyclical current accounts, consumption volatility that exceeds income volatility, and dramatic “sudden stops” in capital inflows. These features contrast with those of developed, small open economies and highlight the uniqueness of emerging markets. Nevertheless, we show that both qualitatively and quantitatively a standard dynamic stochastic, small open economy model can account for the behavior of both types of market...

  20. Wave Engine Topping Cycle Assessment

    Science.gov (United States)

    Welch, Gerard E.

    1996-01-01

    The performance benefits derived by topping a gas turbine engine with a wave engine are assessed. The wave engine is a wave rotor that produces shaft power by exploiting gas dynamic energy exchange and flow turning. The wave engine is added to the baseline turboshaft engine while keeping high-pressure-turbine inlet conditions, compressor pressure ratio, engine mass flow rate, and cooling flow fractions fixed. Related work has focused on topping with pressure-exchangers (i.e., wave rotors that provide pressure gain with zero net shaft power output); however, more energy can be added to a wave-engine-topped cycle leading to greater engine specific-power-enhancement The energy addition occurs at a lower pressure in the wave-engine-topped cycle; thus the specific-fuel-consumption-enhancement effected by ideal wave engine topping is slightly lower than that effected by ideal pressure-exchanger topping. At a component level, however, flow turning affords the wave engine a degree-of-freedom relative to the pressure-exchanger that enables a more efficient match with the baseline engine. In some cases, therefore, the SFC-enhancement by wave engine topping is greater than that by pressure-exchanger topping. An ideal wave-rotor-characteristic is used to identify key wave engine design parameters and to contrast the wave engine and pressure-exchanger topping approaches. An aerodynamic design procedure is described in which wave engine design-point performance levels are computed using a one-dimensional wave rotor model. Wave engines using various wave cycles are considered including two-port cycles with on-rotor combustion (valved-combustors) and reverse-flow and through-flow four-port cycles with heat addition in conventional burners. A through-flow wave cycle design with symmetric blading is used to assess engine performance benefits. The wave-engine-topped turboshaft engine produces 16% more power than does a pressure-exchanger-topped engine under the specified topping

  1. The nuclear fuel cycle versus the carbon cycle

    International Nuclear Information System (INIS)

    Ewing, R.C.

    2005-01-01

    Nuclear power provides approximately 17% of the world's electricity, which is equivalent to a reduction in carbon emissions of ∼0.5 gigatonnes (Gt) of C/yr. This is a modest reduction as compared with global emissions of carbon, ∼7 Gt C/yr. Most analyses suggest that in order to have a significant and timely impact on carbon emissions, carbon-free sources, such as nuclear power, would have to expand total production of energy by factors of three to ten by 2050. A three-fold increase in nuclear power capacity would result in a projected reduction in carbon emissions of 1 to 2 Gt C/yr, depending on the type of carbon-based energy source that is displaced. This three-fold increase utilizing present nuclear technologies would result in 25,000 metric tonnes (t) of spent nuclear fuel (SNF) per year, containing over 200 t of plutonium. This is compared to a present global inventory of approximately 280,000 t of SNF and >1,700 t of Pu. A nuclear weapon can be fashioned from as little as 5 kg of 239 Pu. However, there is considerable technological flexibility in the nuclear fuel cycle. There are three types of nuclear fuel cycles that might be utilized for the increased production of energy: open, closed, or a symbiotic combination of different types of reactor (such as, thermal and fast neutron reactors). The neutron energy spectrum has a significant effect on the fission product yield, and the consumption of long-lived actinides, by fission, is best achieved by fast neutrons. Within each cycle, the volume and composition of the high-level nuclear waste and fissile material depend on the type of nuclear fuel, the amount of burn-up, the extent of radionuclide separation during reprocessing, and the types of materials used to immobilize different radionuclides. As an example, a 232 Th-based fuel cycle can be used to breed fissile 233 U with minimum production of Pu. In this paper, I will contrast the production of excess carbon in the form of CO 2 from fossil fuels with

  2. Creative Cycling of News Professionals

    Directory of Open Access Journals (Sweden)

    Astrid Gynnild, PhD.

    2007-03-01

    Full Text Available The theory of creative cycling emerged from my PhD study of news professionals in Norway. The study was carried out according to classic grounded theory principles (Glaser and Strauss 1967, Glaser 1978, 1998, 2001, 2005, and the area of interest was the performance of news journalism in the multimedia age. The theory runs counter to widespread tendencies of industrial age thinking in news media. It emphasizes news professionals’ search for meaning in their daily work, and suggests that their main concern is self-fulfillment through original contribution. The dilemma and resolution, creative cycling, is a basic social process continuously going within inner and outer framings. It consists of three interrelated dimensions: productive processing, breaks and shifts and inspirational looping.

  3. Airbreathing combined cycle engine systems

    Science.gov (United States)

    Rohde, John

    1992-01-01

    The Air Force and NASA share a common interest in developing advanced propulsion systems for commercial and military aerospace vehicles which require efficient acceleration and cruise operation in the Mach 4 to 6 flight regime. The principle engine of interest is the turboramjet; however, other combined cycles such as the turboscramjet, air turborocket, supercharged ejector ramjet, ejector ramjet, and air liquefaction based propulsion are also of interest. Over the past months careful planning and program implementation have resulted in a number of development efforts that will lead to a broad technology base for those combined cycle propulsion systems. Individual development programs are underway in thermal management, controls materials, endothermic hydrocarbon fuels, air intake systems, nozzle exhaust systems, gas turbines and ramjet ramburners.

  4. Fashion and death: Trends Cycles

    Directory of Open Access Journals (Sweden)

    Flavia Jakemiu Araújo Bortolon

    2016-12-01

    Full Text Available Fashion is composed of cycles subpostos trends that seek to eliminate the past for a new one, which makes it ephemeral and eternal at the same time. This study investigates how is the relationship between these cycles of trends over time, through a brief history of fashion, considering the theoretical rules of Simmel, Crane and Caldas. They will still be used concepts proposed by Agamben, such as: device, in order to classify the system of the fashion; contemporaneidade, to understand the action of that factor in relation to the time and profanation, to identify the capacity to maintain in the society. It is ended that the fashion, as well as the death, renews the society, it destroys and it creates the new, as a system naturalized artificially

  5. The nitrogen cycle: Atmosphere interactions

    Science.gov (United States)

    Levine, J. S.

    1984-01-01

    Atmospheric interactions involving the nitrogen species are varied and complex. These interactions include photochemical reactions, initiated by the absorption of solar photons and chemical kinetic reactions, which involve both homogeneous (gas-to-gas reactions) and heterogeneous (gas-to-particle) reactions. Another important atmospheric interaction is the production of nitrogen oxides by atmospheric lightning. The nitrogen cycle strongly couples the biosphere and atmosphere. Many nitrogen species are produced by biogenic processes. Once in the atmosphere nitrogen oxides are photochemically and chemically transformed to nitrates, which are returned to the biosphere via precipitation, dry deposition and aerosols to close the biosphere-atmosphere nitrogen cycle. The sources, sinks and photochemistry/chemistry of the nitrogen species; atmospheric nitrogen species; souces and sinks of nitrous oxide; sources; sinks and photochemistry/chemistry of ammonia; seasonal variation of the vertical distribution of ammonia in the troposphere; surface and atmospheric sources of the nitrogen species, and seasonal variation of ground level ammonia are summarized.

  6. National Policy on Nuclear Fuel Cycle

    International Nuclear Information System (INIS)

    Soedyartomo, S.

    1996-01-01

    National policy on nuclear fuel cycle is aimed at attaining the expected condition, i.e. being able to support optimality the national energy policy and other related Government policies taking into account current domestic nuclear fuel cycle condition and the trend of international nuclear fuel cycle development, the national strength, weakness, thread and opportunity in the field of energy. This policy has to be followed by the strategy to accomplish covering the optimization of domestic efforts, cooperation with other countries, and or purchasing licences. These policy and strategy have to be broken down into various nuclear fuel cycle programmes covering basically assesment of the whole cycle, performing research and development of the whole cycle without enrichment and reprocessing being able for weapon, as well as programmes for industrialization of the fuel cycle stepwisery commencing with the middle part of the cycle and ending with the edge of the back-end of the cycle

  7. HTGR fuel and fuel cycle technology

    International Nuclear Information System (INIS)

    Lotts, A.L.; Coobs, J.H.

    1976-08-01

    The status of fuel and fuel cycle technology for high-temperature gas-cooled reactors (HTGRs) is reviewed. The all-ceramic core of the HTGRs permits high temperatures compared with other reactors. Core outlet temperatures of 740 0 C are now available for the steam cycle. For advanced HTGRs such as are required for direct-cycle power generation and for high-temperature process heat, coolant temperatures as high as 1000 0 C may be expected. The paper discusses the variations of HTGR fuel designs that meet the performance requirements and the requirements of the isotopes to be used in the fuel cycle. Also discussed are the fuel cycle possibilities, which include the low-enrichment cycle, the Th- 233 U cycle, and plutonium utilization in either cycle. The status of fuel and fuel cycle development is summarized

  8. Branes wrapped on coassociative cycles

    International Nuclear Information System (INIS)

    Hernandez, Rafael

    2001-06-01

    We obtain a supergravity solution arising when D6-branes are wrapped on coassociative four-cycles of constant curvature in seven manifolds of G 2 holonomy. The solutions preserve two supercharges and thus represent supergravity duals of three dimensional Yang-Mills with N=1 supersymmetry. When uplifted to eleven dimensions our solution describes M-theory on the background of an eight manifold with Spin(7) holonomy. (author)

  9. The LifeCycle model

    DEFF Research Database (Denmark)

    Krink, Thiemo; Løvbjerg, Morten

    2002-01-01

    genetic algorithms (GAs), particle swarm optimisation (PSOs), and stochastic hill climbing to create a generally well-performing search heuristics. In the LifeCycle model, we consider candidate solutions and their fitness as individuals, which, based on their recent search progress, can decide to become...... either a GA individual, a particle of a PSO, or a single stochastic hill climber. First results from a comparison of our new approach with the single search algorithms indicate a generally good performance in numerical optimization....

  10. Affective cycling in thyroid disease

    International Nuclear Information System (INIS)

    Tapp, A.

    1988-01-01

    Depression in an elderly man with primary recurrent unipolar depression responded to radioactive iodine treatment of a thyrotoxic nodule, without the addition of psychotropic medications. Two months later, manic symptoms developed concomitant with the termination of the hyperthyroid state secondary to the radioactive iodine treatment. Clinical implications of these findings in relation to the possible mechanism of action of thyroid hormones on affective cycling are discussed

  11. Fuel cycle math - part one

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This article is Part One of a two-part article that reviews some of the numbers associated with the nuclear fuel cycle. The contents of Part One include: composition of the element uranium, considering atomic mass and weight-percent of the isotopes; uranium in the ground, including ore grades; mining, with dilution factors and recovery rates; ore sorting, including concentration factors; and uranium recovery. No financial information is presented in either Part One or Part Two

  12. Technology cycles and technology revolutions

    Energy Technology Data Exchange (ETDEWEB)

    Paganetto, Luigi; Scandizzo, Pasquale Lucio

    2010-09-15

    Technological cycles have been characterized as the basis of long and continuous periods economic growth through sustained changes in total factor productivity. While this hypothesis is in part consistent with several theories of growth, the sheer magnitude and length of the economic revolutions experienced by humankind seems to indicate surmise that more attention should be given to the origin of major technological and economic changes, with reference to one crucial question: role of production and use of energy in economic development.

  13. Optimizing the data life cycle

    Energy Technology Data Exchange (ETDEWEB)

    Schwarz, Kilian [GSI, Planckstr. 1, 64291 Darmstadt (Germany); Jung, Christopher [KIT, Kaiserstrasse 12, 76131 Karlsruhe (Germany)

    2013-07-01

    Today, data play a central role in most fields of Science. In recent years, the amount of data from experiment, observation, and simulation has increased rapidly and the data complexity has grown. Also, communities and shared storage have become geographically more distributed. Therefore, methods and techniques applied for scientific data need to be revised and partially be replaced, while keeping the community-specific needs in focus. The Helmholtz Portfolio Extension ''Large Scale Data Management and Analysis'' (LSDMA) focuses on the optimization of the data life cycle in different research areas. In its five Data Life Cycle Labs (DLCLs), data experts closely collaborate with the communities in joint research and development to optimize the respective data life cycle. In addition, the Data Services Integration Team provides data analysis tools and services which are common to several DLCLs. This presentation describes the various activities within LSDMA and focuses on the work done in the DLCL ''Structure of Matter''. The main topics of this DLCL are the support for the international projects FAIR (Facility for Anti Proton and Ion Research) which will evolve around GSI in Darmstadt and the European XFEL and PETRA III at DESY in Hamburg.

  14. Advanced Fuel Cycle Cost Basis

    Energy Technology Data Exchange (ETDEWEB)

    D. E. Shropshire; K. A. Williams; W. B. Boore; J. D. Smith; B. W. Dixon; M. Dunzik-Gougar; R. D. Adams; D. Gombert; E. Schneider

    2009-12-01

    This report, commissioned by the U.S. Department of Energy (DOE), provides a comprehensive set of cost data supporting a cost analysis for the relative economic comparison of options for use in the Advanced Fuel Cycle Initiative (AFCI) Program. The report describes the AFCI cost basis development process, reference information on AFCI cost modules, a procedure for estimating fuel cycle costs, economic evaluation guidelines, and a discussion on the integration of cost data into economic computer models. This report contains reference cost data for 25 cost modules—23 fuel cycle cost modules and 2 reactor modules. The cost modules were developed in the areas of natural uranium mining and milling, conversion, enrichment, depleted uranium disposition, fuel fabrication, interim spent fuel storage, reprocessing, waste conditioning, spent nuclear fuel (SNF) packaging, long-term monitored retrievable storage, near surface disposal of low-level waste (LLW), geologic repository and other disposal concepts, and transportation processes for nuclear fuel, LLW, SNF, transuranic, and high-level waste.

  15. Advanced Fuel Cycle Cost Basis

    Energy Technology Data Exchange (ETDEWEB)

    D. E. Shropshire; K. A. Williams; W. B. Boore; J. D. Smith; B. W. Dixon; M. Dunzik-Gougar; R. D. Adams; D. Gombert

    2007-04-01

    This report, commissioned by the U.S. Department of Energy (DOE), provides a comprehensive set of cost data supporting a cost analysis for the relative economic comparison of options for use in the Advanced Fuel Cycle Initiative (AFCI) Program. The report describes the AFCI cost basis development process, reference information on AFCI cost modules, a procedure for estimating fuel cycle costs, economic evaluation guidelines, and a discussion on the integration of cost data into economic computer models. This report contains reference cost data for 26 cost modules—24 fuel cycle cost modules and 2 reactor modules. The cost modules were developed in the areas of natural uranium mining and milling, conversion, enrichment, depleted uranium disposition, fuel fabrication, interim spent fuel storage, reprocessing, waste conditioning, spent nuclear fuel (SNF) packaging, long-term monitored retrievable storage, near surface disposal of low-level waste (LLW), geologic repository and other disposal concepts, and transportation processes for nuclear fuel, LLW, SNF, and high-level waste.

  16. Consecutive cycles of hospital accreditation

    DEFF Research Database (Denmark)

    Falstie-Jensen, Anne Mette; Bogh, Søren Bie; Johnsen, Søren Paaske

    2018-01-01

    Objective: To examine the association between compliance with consecutive cycles of accreditation and patient-related outcomes. Design: A Danish nationwide population-based study from 2012 to 2015. Setting: In-patients admitted with one of the 80 diagnoses at public, non-psychiatric hospitals....... Participants: In-patients admitted with one of 80 primary diagnoses which accounted for 80% of all deaths occuring within 30 dyas after admission. Intervention: Admission to a hospital with high (n = 125 485 in-patients) or low compliance (n = 152 074 in-patients) in both cycles of accreditation by the Danish...... admission (adjusted OR: 1.26 (95% CI: 1.11-1.43) and a longer LOS (adjusted HR of discharge: 0.89 (95% CI: 0.82-0.95) than in-patients at high compliant hospitals. No difference was seen for acute readmission (adjusted HR: 0.98 (95% CI: 0.90-1.06)). Focusing on the second cycle alone, in...

  17. The Life Cycle Analysis Toolbox

    International Nuclear Information System (INIS)

    Bishop, L.; Tonn, B.E.; Williams, K.A.; Yerace, P.; Yuracko, K.L.

    1999-01-01

    The life cycle analysis toolbox is a valuable integration of decision-making tools and supporting materials developed by Oak Ridge National Laboratory (ORNL) to help Department of Energy managers improve environmental quality, reduce costs, and minimize risk. The toolbox provides decision-makers access to a wide variety of proven tools for pollution prevention (P2) and waste minimization (WMin), as well as ORNL expertise to select from this toolbox exactly the right tool to solve any given P2/WMin problem. The central element of the toolbox is a multiple criteria approach to life cycle analysis developed specifically to aid P2/WMin decision-making. ORNL has developed numerous tools that support this life cycle analysis approach. Tools are available to help model P2/WMin processes, estimate human health risks, estimate costs, and represent and manipulate uncertainties. Tools are available to help document P2/WMin decision-making and implement programs. Tools are also available to help track potential future environmental regulations that could impact P2/WMin programs and current regulations that must be followed. An Internet-site will provide broad access to the tools

  18. Advanced Fuel Cycle Cost Basis

    Energy Technology Data Exchange (ETDEWEB)

    D. E. Shropshire; K. A. Williams; W. B. Boore; J. D. Smith; B. W. Dixon; M. Dunzik-Gougar; R. D. Adams; D. Gombert; E. Schneider

    2008-03-01

    This report, commissioned by the U.S. Department of Energy (DOE), provides a comprehensive set of cost data supporting a cost analysis for the relative economic comparison of options for use in the Advanced Fuel Cycle Initiative (AFCI) Program. The report describes the AFCI cost basis development process, reference information on AFCI cost modules, a procedure for estimating fuel cycle costs, economic evaluation guidelines, and a discussion on the integration of cost data into economic computer models. This report contains reference cost data for 25 cost modules—23 fuel cycle cost modules and 2 reactor modules. The cost modules were developed in the areas of natural uranium mining and milling, conversion, enrichment, depleted uranium disposition, fuel fabrication, interim spent fuel storage, reprocessing, waste conditioning, spent nuclear fuel (SNF) packaging, long-term monitored retrievable storage, near surface disposal of low-level waste (LLW), geologic repository and other disposal concepts, and transportation processes for nuclear fuel, LLW, SNF, transuranic, and high-level waste.

  19. Simulation of Cycle-to-Cycle Variation in Dual-Fuel Engines

    KAUST Repository

    Jaasim, Mohammed; Pasunurthi, Shyamsundar; Jupudi, Ravichandra S.; Gubba, Sreenivasa Rao; Primus, Roy; Klingbeil, Adam; Wijeyakulasuriya, Sameera; Im, Hong G.

    2017-01-01

    Standard practices of internal combustion (IC) engine experiments are to conduct the measurements of quantities averaged over a large number of cycles. Depending on the operating conditions, the cycle-to-cycle variation (CCV) of quantities

  20. Cycle to Cycle Variation Study in a Dual Fuel Operated Engine

    KAUST Repository

    Pasunurthi, Shyamsundar; Jupudi, Ravichandra; Wijeyakulasuriya, Sameera; Gubba, Sreenivasa Rao; Im, Hong G.; Jaasim, Mohammed; Primus, Roy; Klingbeil, Adam; Finney, Charles

    2017-01-01

    The standard capability of engine experimental studies is that ensemble averaged quantities like in-cylinder pressure from multiple cycles and emissions are reported and the cycle to cycle variation (CCV) of indicated mean effective pressure (IMEP

  1. BUSINESS CYCLES, ELECTORAL CYCLES. TOWARD A THEORETICAL FRAME OF INTERACTION

    Directory of Open Access Journals (Sweden)

    BOGDAN-LUCIAN DOSPINESCU

    2015-06-01

    Full Text Available The idea of cyclical movement of a system: be it political, economic, institutional, is one of the constants of critical thinking. In this sense, there is a natural cyclic movement that cannot be avoided (only amplified or diminished and is connected with the nature of these systems. The economy follows a cyclical movement; a period of growth follows a period of decline, and so on. So does popularity for political parties or leaders. In this paper, I explore the links between the business cycles and electoral cycles. For this purpose, I introduce the concept of electoral perception cycles. My hypothesis is that popularity of political parties and leaders follow a cyclical evolution, both on short and long term. I show how perception cycles can impact the “political business cycle theory”. There is great interest in political science literature for the factors that influence the fluctuations in Presidents’ popularity, especially from United States. However, very little has been said about Romania’s case. I investigate the hypothesis of electoral perception cycles looking at the popularity of former president Traian Basescu, over his two terms. The variable used to measure popularity is favorability, measured in national surveys, done face to face, on representative samplez, of around 1000 subjects. I’ve correlated the fluctuations in favorability over time, with key public events or political decisions taken by Traian Băsescu. The main findings are as follows. Firstly, there are significant short term fluctuations (short term perception cycles and they are correlated with major events on the agenda. I would point the following key moments: 1. The referendum for dismissal of the President in May 2007 – Traian Băsescu’s favorability increased by 7 percentage points; 2. The referendum for unicameral Parliament with 300 MPs in the fall of 2009. Coupled with victory in the presidential election, it lead to an increase of 10 percentage

  2. The nuclear fuel cycle; Le cycle du combustible nucleaire

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-05-01

    After a short introduction about nuclear power in the world, fission physics and the French nuclear power plants, this brochure describes in a digest way the different steps of the nuclear fuel cycle: uranium prospecting, mining activity, processing of uranium ores and production of uranium concentrates (yellow cake), uranium chemistry (conversion of the yellow cake into uranium hexafluoride), fabrication of nuclear fuels, use of fuels, reprocessing of spent fuels (uranium, plutonium and fission products), recycling of energetic materials, and storage of radioactive wastes. (J.S.)

  3. The benefits of longer fuel cycle lengths

    International Nuclear Information System (INIS)

    Kesler, D.C.

    1986-01-01

    Longer fuel cycle lengths have been found to increase generation and improve outage management. A study at Duke Power Company has shown that longer fuel cycles offer both increased scheduling flexibility and increased capacity factors

  4. ACTIVE CYCLE BREATHING TECHNIQUES IN HEART FAILURE ...

    African Journals Online (AJOL)

    RICHY

    Pulmonary Function Responses to Active Cycle. Breathing ... Key Words: Heart Failure, Active Cycle of Breathing ... cough, fatigue, reduced respiratory muscle mass, and. [5] ... an amount of exercise which is said to lower disease. [9].

  5. Life cycle management in product development

    DEFF Research Database (Denmark)

    Skelton, Kristen; Pattis, Anna

    2013-01-01

    The integration of Life Cycle Thinking (LCT) and Life Cycle Management (LCM) into business operations poses great challenges, as it requires a wider range of environmental responsibility often extending beyond a company's immediate control. Simultaneously, it offers many opportunities...

  6. Fuel cycle problems in fusion reactors

    International Nuclear Information System (INIS)

    Hickman, R.G.

    1976-01-01

    Fuel cycle problems of fusion reactors evolve around the breeding, recovery, containment, and recycling of tritium. These processes are described, and their implications and alternatives are discussed. Technically, fuel cycle problems are solvable; economically, their feasibility is not yet known

  7. Not all counterclockwise thermodynamic cycles are refrigerators

    Science.gov (United States)

    Dickerson, R. H.; Mottmann, J.

    2016-06-01

    Clockwise cycles on PV diagrams always represent heat engines. It is therefore tempting to assume that counterclockwise cycles always represent refrigerators. This common assumption is incorrect: most counterclockwise cycles cannot be refrigerators. This surprising result is explored here for quasi-static ideal gas cycles, and the necessary conditions for refrigeration cycles are clarified. Three logically self-consistent criteria can be used to determine if a counterclockwise cycle is a refrigerator. The most fundamental test compares the counterclockwise cycle with a correctly determined corresponding Carnot cycle. Other criteria we employ include a widely accepted description of the functional behavior of refrigerators, and a corollary to the second law that limits a refrigerator's coefficient of performance.

  8. Economic evaluation of fast reactor fuel cycling

    International Nuclear Information System (INIS)

    Hu Ping; Zhao Fuyu; Yan Zhou; Li Chong

    2012-01-01

    Economic calculation and analysis of two kinds of nuclear fuel cycle are conducted by check off method, based on the nuclear fuel cycling process and model for fast reactor power plant, and comparison is carried out for the economy of fast reactor fuel cycle and PWR once-through fuel cycle. Calculated based on the current price level, the economy of PWR one-through fuel cycle is better than that of the fast reactor fuel cycle. However, in the long term considering the rising of the natural uranium's price and the development of the post treatment technology for nuclear fuels, the cost of the fast reactor fuel cycle is expected to match or lower than that of the PWR once-through fuel cycle. (authors)

  9. VVER fuel cycle development at Slovakia

    International Nuclear Information System (INIS)

    Darilek, P.; Chrapiak, V.; Majerik, J.

    1995-01-01

    Four VVER-440 units are now under exploitation at Bohunice-site in Slovakia. Fuel cycle development of Unit No.3 and No.4 (type 213) is discussed and compared with equilibrium cycles in this paper. (author)

  10. Compound process fuel cycle concept

    International Nuclear Information System (INIS)

    Ikegami, Tetsuo

    2005-01-01

    Mass flow of light water reactor spent fuel for a newly proposed nuclear fuel cycle concept 'Compound Process Fuel Cycle' has been studied in order to assess the capacity of the concept for accepting light water reactor spent fuels, taking an example for boiling water reactor mixed oxide spent fuel of 60 GWd/t burn-up and for a fast reactor core of 3 GW thermal output. The acceptable heavy metal of boiling water reactor mixed oxide spent fuel is about 3.7 t/y/reactor while the burn-up of the recycled fuel is about 160 GWd/t and about 1.6 t/y reactor with the recycled fuel burn-up of about 300 GWd/t, in the case of 2 times recycle and 4 times recycle respectively. The compound process fuel cycle concept has such flexibility that it can accept so much light water reactor spent fuels as to suppress the light water reactor spent fuel pile-up if not so high fuel burn-up is expected, and can aim at high fuel burn-up if the light water reactor spent fuel pile-up is not so much. Following distinctive features of the concept have also been revealed. A sort of ideal utilization of boiling water reactor mixed oxide spent fuel might be achieved through this concept, since both plutonium and minor actinide reach equilibrium state beyond 2 times recycle. Changes of the reactivity coefficients during recycles are mild, giving roughly same level of reactivity coefficients as the conventional large scale fast breeder core. Both the radio-activity and the heat generation after 4 year cooling and after 4 times recycle are less than 2.5 times of those of the pre recycle fuel. (author)

  11. International nuclear fuel cycle evaluation

    International Nuclear Information System (INIS)

    Witt, P.

    1980-01-01

    In the end of February 1980, the two-years work on the International Nuclear Fuel Cycle Evaluation (INFCE) was finished in Vienna with a plenary meeting. INFCE is likely to have been a unique event in the history of international meetings: It was ni diplomatic negotiation meeting, but a techno-analytical investigation in which the participants tenaciously shuggled for many of the formulations. Starting point had been a meeting initiated by President Carter in Washington in Oct. 1979 after the World Economy Summit Meeting in London. The results of the investigation are presented here in a brief and popular form. (orig./UA) [de

  12. Business cycles, migration and health.

    Science.gov (United States)

    Halliday, Timothy J

    2007-04-01

    We investigate the proposition that illness poses as an obstacle to one's ability to use migration to hedge the business cycle. We employ data on migration, regional unemployment rates and health status from 10 years (1984-1993) of the US Panel Study of Income Dynamics. Our results provide considerable for support this proposition. The evidence is the strongest for men, but we also find weaker evidence for married women. These results suggest that--ceterus paribus--aggregate health outcomes in an area should improve when the regional economy expands.

  13. Corporate governance cycles during transition

    DEFF Research Database (Denmark)

    Jones, Derek C.; Mygind, Niels

    2004-01-01

    -sures for restructuring produce strong impulses for ownership changes. There is limited possibility for external finance because of the embryonic development of the banking system and the capital markets during early transition. The governance cycle is also influenced by specific features of the institutional, cultural...... is faster in Estonia and this can be explained by the relatively fast pace of institutional change and evolution of important gov-ernance institutions, including tough bankruptcy legislation and advances in the financial system. JEL-codes: G3, J5, P2, P3 Keywords: corporate governance, life...

  14. Climate and the Carbon Cycle

    Science.gov (United States)

    Manley, Jim

    2017-04-01

    Climate and the Carbon Cycle EOS3a Science in tomorrow's classroom Students, like too much of the American public, are largely unaware or apathetic to the changes in world climate and the impact that these changes have for life on Earth. A study conducted by Michigan State University and published in 2011 by Science Daily titled 'What carbon cycle? College students lack scientific literacy, study finds'. This study relates how 'most college students in the United States do not grasp the scientific basis of the carbon cycle - an essential skill in understanding the causes and consequences of climate change.' The study authors call for a new approach to teaching about climate. What if teachers better understood vital components of Earth's climate system and were able to impart his understanding to their students? What if students based their responses to the information taught not on emotion, but on a deeper understanding of the forces driving climate change, their analysis of the scientific evidence and in the context of earth system science? As a Middle School science teacher, I have been given the opportunity to use a new curriculum within TERC's EarthLabs collection, Climate and the Carbon Cycle, to awaken those brains and assist my students in making personal lifestyle choices based on what they had learned. In addition, with support from TERC and The University of Texas Institute for Geophysics I joined others to begin training other teachers on how to implement this curriculum in their classrooms to expose their students to our changing climate. Through my poster, I will give you (1) a glimpse into the challenges faced by today's science teachers in communicating the complicated, but ever-deepening understanding of the linkages between natural and human-driven factors on climate; (2) introduce you to a new module in the EarthLabs curriculum designed to expose teachers and students to global scientific climate data and instrumentation; and (3) illustrate how

  15. Radioecology of nuclear fuel cycles

    International Nuclear Information System (INIS)

    Cadwell, L.L.

    1982-01-01

    This study provides information to help assess the environmental impacts and certain potential human hazards associated with nuclear fuel cycles. A data base is being developed to define and quantify biological transport routes, which will permit credible predictions and assessment of routine and potential large-scale releases of radionuclides and other toxic materials. These data, used in assessment models, will increase the accuracy of estimating radiation doses to man and other life forms. Results will provide information to determine if waste management procedures on the Hanford site have caused ecological perturbations, and, if so, to determine the source, nature and magnitude of such disturbances

  16. Rankine cycle system and method

    Science.gov (United States)

    Ernst, Timothy C.; Nelson, Christopher R.

    2014-09-09

    A Rankine cycle waste heat recovery system uses a receiver with a maximum liquid working fluid level lower than the minimum liquid working fluid level of a sub-cooler of the waste heat recovery system. The receiver may have a position that is physically lower than the sub-cooler's position. A valve controls transfer of fluid between several of the components in the waste heat recovery system, especially from the receiver to the sub-cooler. The system may also have an associated control module.

  17. Outsourcing Innovation in Product Cycles

    OpenAIRE

    Chu, Hsiao-Lei

    2012-01-01

    In this quality-ladder product-cycles model, a southern firm can undertake innovation by collaborating with a northern firm through R&D outsourcing. Generally, I find that the initial steady-state scale of R&D outsourcing and the fraction of innovative tasks undertaken by southern labor through R&D outsourcing critically affect the results of comparative statics. Particularly, the friendly policy to promote R&D outsourcing may be beneficial for both of the North and the South only if the scal...

  18. Radioecology of nuclear fuel cycles

    International Nuclear Information System (INIS)

    Schreckhise, R.G.; Cadwell, L.L.; Emery, R.M.

    1981-01-01

    This study provides information to help assess the environmental impacts and certain potential human hazards associated with nuclear fuel cycles. A data base is being developed to define and quantify biological transport routes which will permit credible predictions and assessment of routine and potential large-scale releases of radionuclides and other toxic materials. Information obtained from existing storage and disposal sites will provide a meaningful radioecological perspective with which to improve the effectiveness of waste management practices. This paper focuses on terrestrial and aquatic radioecology of waste management areas and biotic transport parameters

  19. New technology and fuel cycles

    International Nuclear Information System (INIS)

    Mooradian, A.J.

    1979-06-01

    The means of improving uranium utilization in nuclear power reactors are reviewed with respect to economic considerations, assurance of adequate fuel supplies and risk of weapons proliferation. Reference is made to what can be done to improve fuel economy in existing reactor systems operating on a once-through fuel cycle and the potential for improvement offered by fuel recycle in those systems. The state of development of new reactor systems that offer significant savings in uranium utilization is also reviewed and conclusions are made respecting the policy implications of the search for fuel economy. (author)

  20. Lively quantum walks on cycles

    International Nuclear Information System (INIS)

    Sadowski, Przemysław; Miszczak, Jarosław Adam; Ostaszewski, Mateusz

    2016-01-01

    We introduce a family of quantum walks on cycles parametrized by their liveliness, defined by the ability to execute a long-range move. We investigate the behaviour of the probability distribution and time-averaged probability distribution. We show that the liveliness parameter, controlling the magnitude of the additional long-range move, has a direct impact on the periodicity of the limiting distribution. We also show that the introduced model provides a method for network exploration which is robust against trapping. (paper)

  1. Design Innovation and Fashion Cycles.

    OpenAIRE

    Pesendorfer, Wolfgang

    1995-01-01

    A model of fashion cycles is developed in which fashion is used as a signalling device in a "dating-game". We assume that there is a designer (monopolist) who can create new designs at a positive fixed cost and zero marginal cost. Designs are durable commodities. We show the existence of equilibria of the following form: Every T periods a new design is innovated. Over time the price of the design falls and it spreads to more and more agents. Once sufficiently many agents own the design it is ...

  2. Fuel cycle and quality control

    International Nuclear Information System (INIS)

    Stoll, W.

    1979-01-01

    The volume of the fuel cycle is described in its economic importance and its through put, as it is envisaged for the Federal Republic of Germany. Definitions are given for quality continuing usefulness of an object and translated into quality criteria. Requirements on performance of fuel elements are defined. The way in which experimental results are translated into mass production of fuel rods, is described. The economic potential for further quality effort is derived. Future ways of development for quality control organisation and structure are outlined. (Auth.)

  3. Regulation at nuclear fuel cycle

    International Nuclear Information System (INIS)

    2002-01-01

    This bulletin contains information about activities of the Nuclear Regulatory Authority of the Slovak Republic (UJD). In this leaflet the role of the UJD in regulation at nuclear fuel cycle is presented. The Nuclear Fuel Cycle (NFC) is a complex of activities linked with production of nuclear fuel for nuclear reactors as a source of energy used for production of electricity and heat, and of activities linked with spent nuclear fuel handling. Activities linked with nuclear fuel (NF) production, known as the Front-End of Nuclear Fuel Cycle, include (production of nuclear fuel from uranium as the most frequently used element). After discharging spent nuclear fuel (SNF) from nuclear reactor the activities follow linked with its storage, reprocessing and disposal known as the Back-End of Nuclear Fuel Cycle. Individual activity, which penetrates throughout the NFC, is transport of nuclear materials various forms during NF production and transport of NF and SNF. Nuclear reactors are installed in the Slovak Republic only in commercial nuclear power plants and the NFC is of the open type is imported from abroad and SNF is long-term supposed without reprocessing. The main mission of the area of NFC is supervision over: - assurance of nuclear safety throughout all NFC activities; - observance of provisions of the Treaty on Non-Proliferation of Nuclear Weapons during nuclear material handling; with an aim to prevent leakage of radioactive substances into environment (including deliberated danage of NFC sensitive facilities and misuse of nuclear materials to production of nuclear weapons. The UJD carries out this mission through: - assessment of safety documentation submitted by operators of nuclear installations at which nuclear material, NF and SNF is handled; - inspections concentrated on assurance of compliance of real conditions in NFC, i.e. storage and transport of NF and SNF; storage, transport and disposal of wastes from processing of SNF; with assumptions of the safety

  4. Population crises and population cycles.

    Science.gov (United States)

    Russell, C; Russell, W M

    2000-01-01

    To prevent a population irretrievably depleting its resources, mammals have evolved a behavioural and physiological response to population crisis. When a mammalian population becomes dangerously dense, there is a reversal of behaviour. Co-operation and parental behaviour are replaced by competition, dominance and aggressive violence, leading to high mortality, especially of females and young, and a reduced population. The stress of overpopulation and the resulting violence impairs both the immune and the reproductive systems. Hence epidemics complete the crash of the population, and reproduction is slowed for three or four generations, giving the resources ample time to recover. In some mammal species, crisis and crisis response recur regularly, leading to cycles of population growth and relapse, oscillating about a fixed mean. Population crisis response and population cycles have been equally prominent in the history of human societies. But in man successive advances in food production have made possible growing populations, though with every such advance population soon outgrew resources again. Hence human cycles have been superimposed on a rising curve, producing a saw-tooth graph. Because advances in food production amounted to sudden disturbances in the relations between human populations and their environments, the crisis response in man has failed to avert famine and resource damage. In the large human societies evolved since the coming of settled agriculture and cities, the basic effects of violence, epidemics, famine and resource damage have been mediated by such specifically human disasters as inflation, unemployment, and political tyranny. An account of past crises, periods of relative relief from population pressure, and resulting cycles, is given for a number of regions: China, North Africa and Western Asia, the northern Mediterranean, and north-western Europe. The paper ends with an account of the present world-wide population crisis, and the solution

  5. CHOOSING DRIVING CYCLE OF HYBRID VEHICLE

    Directory of Open Access Journals (Sweden)

    A. Vorona

    2011-01-01

    Full Text Available The analysis of existing driving cycles was performed. After comparing some of the cycles, one specific driving cycle was selected for the hybrid vehicle as the most reliable in representing the real moving of the vehicle in operating conditions and which may be reproduced at experimental tests at the modeling roller stand.

  6. Life cycle sustainability assessment of chemical processes

    DEFF Research Database (Denmark)

    Xu, Di; Lv, Liping; Ren, Jingzheng

    2017-01-01

    In this study, an integrated vector-based three-dimensional (3D) methodology for the life cycle sustainability assessment (LCSA) of chemical process alternatives is proposed. In the methodology, a 3D criteria assessment system is first established by using the life cycle assessment, the life cycl...

  7. Life cycle assessment : Past, present, and future

    NARCIS (Netherlands)

    Guinée, Jeroen B.; Heijungs, Reinout; Huppes, Gjalt; Zamagni, Alessandra; Masoni, Paolo; Buonamici, Roberto; Ekvall, Tomas; Rydberg, Tomas

    2011-01-01

    Environmental life cycle assessment (LCA) has developed fast over the last three decades. Whereas LCA developed from merely energy analysis to a comprehensive environmental burden analysis in the 1970s, full-fledged life cycle impact assessment and life cycle costing models were introduced in the

  8. Nitrogen Cycle Ninja, A Teaching Exercise.

    Science.gov (United States)

    Raun, William R.; And Others

    1997-01-01

    Assesses the effectiveness of using pop quizzes and rewards to improve student retention of the nitrogen cycle. Students able to diagram the N cycle on pop quizzes were rewarded with special cards that included the N cycle. These cards could then be used on subsequent tests in place of memory alone. Six of 11 students tested three months later…

  9. Teaching the Rock Cycle with Ease.

    Science.gov (United States)

    Bereki, Debra

    2000-01-01

    Describes a hands-on lesson for teaching high school students the concept of the rock cycle using sedimentary, metamorphic, and igneous rocks. Students use a rock cycle diagram to identify pairs of rocks. From the rock cycle, students explain on paper how their first rock became the second rock and vice versa. (PVD)

  10. Does It Have a Life Cycle?

    Science.gov (United States)

    Keeley, Page

    2010-01-01

    If life continues from generation to generation, then all plants and animals must go through a life cycle, even though it may be different from organism to organism. Is this what students have "learned," or do they have their own private conceptions about life cycles? The formative assessment probe "Does It Have a Life Cycle?" reveals some…

  11. Aspects of the fast reactors fuel cycle

    International Nuclear Information System (INIS)

    Zouain, D.M.

    1982-06-01

    The fuel cycle for fast reactors, is analysed, regarding the technical aspects of the developing of the reprocessing stages and the fuel fabrication. The environmental impact of LMFBRs and the waste management of this cycle are studied. The economic aspects of the fuel cycle, are studied too. Some coments about the Brazilian fast reactors programs are done. (E.G.) [pt

  12. Constructing Dense Graphs with Unique Hamiltonian Cycles

    Science.gov (United States)

    Lynch, Mark A. M.

    2012-01-01

    It is not difficult to construct dense graphs containing Hamiltonian cycles, but it is difficult to generate dense graphs that are guaranteed to contain a unique Hamiltonian cycle. This article presents an algorithm for generating arbitrarily large simple graphs containing "unique" Hamiltonian cycles. These graphs can be turned into dense graphs…

  13. On Acyclicity of Games with Cycles

    DEFF Research Database (Denmark)

    Andersson, Daniel; Gurvich, Vladimir; Hansen, Thomas Dueholm

    2009-01-01

    We study restricted improvement cycles (ri-cycles) in finite positional n-person games with perfect information modeled by directed graphs (digraphs) that may contain cycles. We obtain criteria of restricted improvement acyclicity (ri-acyclicity) in two cases: for n = 2 and for acyclic digraphs. We...

  14. 40 CFR 94.105 - Duty cycles.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Duty cycles. 94.105 Section 94.105... EMISSIONS FROM MARINE COMPRESSION-IGNITION ENGINES Test Procedures § 94.105 Duty cycles. (a) Overview. For....8(e), engines shall be tested using the appropriate duty cycles described in this section. (b...

  15. Round and Round the Water Cycle

    Science.gov (United States)

    Bradley, Barbara A.

    2017-01-01

    Children enjoy water play, and kindergarten children can learn about the water cycle. Teachers are already introducing elements of the water cycle when discussing weather and bodies of water. The water cycle also can be a springboard for teaching children about plants and animals and the importance of water for sustaining life and shaping our…

  16. Proposal of a nuclear cycle research and development plan in Tokai works. The roadmap from LWR cycle to FBR cycle

    International Nuclear Information System (INIS)

    Nakamura, Hirofumi; Abe, Tomoyuki; Kashimura, Takuo; Nagai, Toshihisa; Maeda, Seichiro; Yamaguchi, Toshiya; Kuroki, Ryoichiro

    2003-07-01

    The Generation-II Project Task Force Team has investigated a research and development plan of a future nuclear fuel cycle in Tokai works for about three months from December 19, 2002. First we have discussed about the present condition of Japanese nuclear fuel cycle and have recognized it as the following. The relation of the technology between the LWR-cycle and the FBR-cycle is not clear. MOX Fuel Use in Light Water Reactors is important to establish technology of the FBR fuel cycle. Radioactive waste disposal issue is urgent. Next we have proposed the three basic policies on R and D plan of nuclear fuel cycle in consideration of the F.S. on FBR-cycle. Establishment and advancement of 'the tough nuclear fuel cycle'. Early establishment of the FBR cycle technology to be able to supply energy stably for long-term. Establishment of the radioactive waste treatment and disposal technology, and optimization of nuclear fuel cycle technology from the viewpoint of radioactive waste. And we have proposed the Japanese technical holder system to integrate all LWR and FBR cycle technology. (author)

  17. Western Canada drilling cycle optimization

    International Nuclear Information System (INIS)

    2003-06-01

    The oil and gas industry in western Canada operates in annual and seasonal cycles with peak activity periods that require a large skilled labour force for short periods of time. This study examines why seismic and drilling activity is greatest during the first quarter of the year instead of being distributed evenly over the year. The objective of the study was to provide recommendations that would help optimize the industry cycle. The study includes an analysis of historical trends that validate the industry first quarter peaking activity. It also includes interviews with 36 industry representatives and provides insight and validation of trends. The final phase of the report includes recommendations that both industry and governments may wish to implement. The study includes financial, operational and environmental considerations. It was shown that natural gas directed drilling activity is strongly correlated with changes in natural gas prices. In the case of oil drilling activity, peak activity responds to oil prices from the prior quarter. In general, drilling and seismic costs are higher in the winter months because of increased demand for equipment and services. In addition winter drilling operations require a diesel fired boiler to generate steam. 36 refs., 2 tabs., 52 figs

  18. Life cycles of energetic systems

    International Nuclear Information System (INIS)

    Adnot, Jerome; Marchio, Dominique; Riviere, Philippe; Duplessis, B.; Rabl, A.; Glachant, M.; Aggeri, F.; Benoist, A.; Teulon, H.; Daude, J.

    2012-01-01

    This collective publication aims at being a course for students in engineering of energetic systems, i.e. at learning how to decide to accept or discard a project, to select the most efficient system, to select the optimal system, to select the optimal combination of systems, and to classify independent systems. Thus, it presents methods to analyse system life cycle from an energetic, economic and environmental point of view, describes how to develop an approach to the eco-design of an energy consuming product, how to understand the importance of hypotheses behind abundant and often contradicting publicised results, and to be able to criticise or to put in perspective one's own analysis. The first chapters thus recall some aspects of economic calculation, introduce the assessment of investment and exploitation costs of energetic systems, describe how to assess and internalise environmental costs, present the territorial carbon assessment, discuss the use of the life cycle assessment, and address the issue of environmental management at a product scale. The second part proposes various case studies: an optimal fleet of thermal production of electric power, the eco-design of a refrigerator, the economic and environmental assessment of wind farms

  19. Life Cycle Assessment of Concrete

    Energy Technology Data Exchange (ETDEWEB)

    Sjunnesson, Jeannette

    2005-09-15

    This is an environmental study on concrete that follows the standard protocol of life cycle assessment (LCA). The study is done for two types of concrete, ordinary and frost-resistant concrete, and has an extra focus on the superplasticizers used as admixtures. The utilization phase is not included in this study since the type of construction for which the concrete is used is not defined and the concrete is assumed to be inert during this phase. The results show that it is the production of the raw material and the transports involved in the life cycle of concrete that are the main contributors to the total environmental load. The one single step in the raw material production that has the highest impact is the production of cement. Within the transportation operations the transportation of concrete is the largest contributor, followed by the transportation of the cement. The environmental impact of frost-resistant concrete is between 24-41 % higher than that of ordinary concrete due to its higher content of cement. Superplasticizers contribute with approximately 0.4-10.4 % of the total environmental impact of concrete, the least to the global warming potential (GWP) and the most to the photochemical ozone creation potential (POCP). Also the toxicity of the superplasticizers is investigated and the conclusion is that the low amount of leakage of superplasticizers from concrete leads to a low risk for the environment and for humans.

  20. MHD Integrated Topping Cycle Project

    Energy Technology Data Exchange (ETDEWEB)

    1992-01-01

    The overall objective of the project is to design and construct prototypical hardware for an integrated MHD topping cycle, and conduct long duration proof-of-concept tests of integrated system at the US DOE Component Development and Integration Facility in Butte, Montana. The results of the long duration tests will augment the existing engineering design data base on MHD power train reliability, availability, maintainability, and performance, and will serve as a basis for scaling up the topping cycle design to the next level of development, an early commercial scale power plant retrofit. The components of the MHD power train to be designed, fabricated, and tested include: A slagging coal combustor with a rated capacity of 50 MW thermal input, capable of operation with an Eastern (Illinois {number sign}6) or Western (Montana Rosebud) coal, a segmented supersonic nozzle, a supersonic MHD channel capable of generating at least 1.5 MW of electrical power, a segmented supersonic diffuser section to interface the channel with existing facility quench and exhaust systems, a complete set of current control circuits for local diagonal current control along the channel, and a set of current consolidation circuits to interface the channel with the existing facility inverter.

  1. Social Life Cycle Assessment Revisited

    Directory of Open Access Journals (Sweden)

    Ruqun Wu

    2014-07-01

    Full Text Available To promote the development of Social Life Cycle Assessment (SLCA, we conducted a comprehensive review of recently developed frameworks, methods, and characterization models for impact assessment for future method developers and SLCA practitioners. Two previous reviews served as our foundations for this review. We updated the review by including a comprehensive list of recently-developed SLCA frameworks, methods and characterization models. While a brief discussion from goal, data, and indicator perspectives is provided in Sections 2 to 4 for different frameworks/methods, the focus of this review is Section 5 where discussion on characterization models for impact assessment of different methods is provided. The characterization models are categorized into two types following the UNEP/SETAC guidelines: type I models without impact pathways and type II models with impact pathways. Different from methods incorporating type I/II characterization models, another LCA modeling approach, Life Cycle Attribute Assessment (LCAA, is also discussed in this review. We concluded that methods incorporating either type I or type II models have limitations. For type I models, the challenge lies in the systematic identification of relevant stakeholders and materiality issues; while for type II models, identification of impact pathways that most closely and accurately represent the real-world causal relationships is the key. LCAA may avoid these problems, but the ultimate questions differ from those asked by the methods using type I and II models.

  2. Technology development life cycle processes.

    Energy Technology Data Exchange (ETDEWEB)

    Beck, David Franklin

    2013-05-01

    This report and set of appendices are a collection of memoranda originally drafted in 2009 for the purpose of providing motivation and the necessary background material to support the definition and integration of engineering and management processes related to technology development. At the time there was interest and support to move from Capability Maturity Model Integration (CMMI) Level One (ad hoc processes) to Level Three. As presented herein, the material begins with a survey of open literature perspectives on technology development life cycles, including published data on %E2%80%9Cwhat went wrong.%E2%80%9D The main thrust of the material presents a rational expose%CC%81 of a structured technology development life cycle that uses the scientific method as a framework, with further rigor added from adapting relevant portions of the systems engineering process. The material concludes with a discussion on the use of multiple measures to assess technology maturity, including consideration of the viewpoint of potential users.

  3. Advanced Fuel Cycle Economic Sensitivity Analysis

    Energy Technology Data Exchange (ETDEWEB)

    David Shropshire; Kent Williams; J.D. Smith; Brent Boore

    2006-12-01

    A fuel cycle economic analysis was performed on four fuel cycles to provide a baseline for initial cost comparison using the Gen IV Economic Modeling Work Group G4 ECON spreadsheet model, Decision Programming Language software, the 2006 Advanced Fuel Cycle Cost Basis report, industry cost data, international papers, the nuclear power related cost study from MIT, Harvard, and the University of Chicago. The analysis developed and compared the fuel cycle cost component of the total cost of energy for a wide range of fuel cycles including: once through, thermal with fast recycle, continuous fast recycle, and thermal recycle.

  4. Thermal cycling in multifilamentary superconducting composites

    International Nuclear Information System (INIS)

    Aragao, E.E.A. de.

    1984-01-01

    NbTi-Cu multifilamentary superconducting composites were embedded, polished, characterized by microscopic techniques, and analyzed in a qualitative and semiquantitative way by energy dispersion technique. The superconductors were submitted to thermal cycling between the ambient temperature and the boiling point of helium (4.2K), for different number of cycles. The aims were to study the correlation between the possible microstructural damages due to thermal stresses arising in the composite during cycling and the variation of properties of the material with the number of cycles as well as to verify the validity of an elastic model for thermal stresses for low temperature cycles. (author)

  5. Understanding the petrochemical cycle: Part 1

    International Nuclear Information System (INIS)

    Sedriks, W.

    1994-01-01

    Fitness in the hydrocarbon processing industry (HPI) arena involves understanding and coping with business cycles: supply and demand. This becomes increasingly more important as the industry globalizes and matures. Competitive-edge thinking needs to look hard at the forces that influence business cycles. Recognition of potential pitfalls is very important when considering: future capacity expansion, mergers and acquisitions, market departure, plant closure, potential product substitution, etc. Understanding pricing mechanisms and the workings of hockey-stick profitability profiles help HPI operators endure cycle downturns and prepare plants to maximize profits for the next upswing. The paper discusses characteristic trends, cycles in the hydrocarbon processing industry, current conditions, and mitigating cycle effects

  6. Polity age and political budget cycles

    DEFF Research Database (Denmark)

    Aaskoven, Lasse

    2018-01-01

    Incumbent incentive for competence-signaling and lack of voter information are generally thought to be factors that increase the prevalence of political budget cycles. These mechanisms should be more prevalent in new political units. Since the creation of new political units is rarely exogenous......-experimental to study whether political budget cycles are larger in new political units. Contrary to theoretical predictions, political budget cycles seem to be of a smaller scale in the new municipalities, but only regarding budget cycles in budgetary overruns. The findings are of wider interest for discussions about...... the mechanisms behind context-conditional political budget cycles....

  7. 40 CFR 1065.514 - Cycle-validation criteria for operation over specified duty cycles.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Cycle-validation criteria for operation over specified duty cycles. 1065.514 Section 1065.514 Protection of Environment ENVIRONMENTAL... Over Specified Duty Cycles § 1065.514 Cycle-validation criteria for operation over specified duty...

  8. Fuel Cycle System Analysis Handbook

    International Nuclear Information System (INIS)

    Piet, Steven J.; Dixon, Brent W.; Gombert, Dirk; Hoffman, Edward A.; Matthern, Gretchen E.; Williams, Kent A.

    2009-01-01

    This Handbook aims to improve understanding and communication regarding nuclear fuel cycle options. It is intended to assist DOE, Campaign Managers, and other presenters prepare presentations and reports. When looking for information, check here. The Handbook generally includes few details of how calculations were performed, which can be found by consulting references provided to the reader. The Handbook emphasizes results in the form of graphics and diagrams, with only enough text to explain the graphic, to ensure that the messages associated with the graphic is clear, and to explain key assumptions and methods that cause the graphed results. Some of the material is new and is not found in previous reports, for example: (1) Section 3 has system-level mass flow diagrams for 0-tier (once-through), 1-tier (UOX to CR=0.50 fast reactor), and 2-tier (UOX to MOX-Pu to CR=0.50 fast reactor) scenarios - at both static and dynamic equilibrium. (2) To help inform fast reactor transuranic (TRU) conversion ratio and uranium supply behavior, section 5 provides the sustainable fast reactor growth rate as a function of TRU conversion ratio. (3) To help clarify the difference in recycling Pu, NpPu, NpPuAm, and all-TRU, section 5 provides mass fraction, gamma, and neutron emission for those four cases for MOX, heterogeneous LWR IMF (assemblies mixing IMF and UOX pins), and a CR=0.50 fast reactor. There are data for the first 10 LWR recycle passes and equilibrium. (4) Section 6 provides information on the cycle length, planned and unplanned outages, and TRU enrichment as a function of fast reactor TRU conversion ratio, as well as the dilution of TRU feedstock by uranium in making fast reactor fuel. (The recovered uranium is considered to be more pure than recovered TRU.) The latter parameter impacts the required TRU impurity limits specified by the Fuels Campaign. (5) Section 7 provides flows for an 800-tonne UOX separation plant. (6) To complement 'tornado' economic uncertainty

  9. The heat engine cycle, the heat removal cycle, and ergonomics of the control room displays

    International Nuclear Information System (INIS)

    Beltracchi, L.

    1986-01-01

    This paper discusses and illustrates the ergonomics of an integrated display, which will allow operators to monitor the heat engine cycle during normal operation of the plant, and the heat removal cycle during emergency operation of the plant. A computer-based iconic display is discussed as an overview to monitor these cycles. Specific emphasis is placed upon the process variables and process functions within each cycle, and the action of control systems and engineered safeguard systems within each cycle. This paper contains examples of display formats for the heat engine cycle and the heat removal cycle in a pressurized water reactor

  10. International Nuclear Fuel Cycle Evaluation

    International Nuclear Information System (INIS)

    Carnesale, A.

    1980-01-01

    As nuclear power expands globally, so too expands the capability for producing nuclear weapons. The International Nuclear Fuel Cycle Evaluation (INFCE) was organized in 1977 for the purpose of exploring two areas: (1) ways in which nuclear energy can be made available to help meet world energy needs, and (2) means by which the attendant risk of weapons proliferation can be held to a minimum. INFCE is designed for technical and analytical study rather than negotiation. Its organizational structure and issues under consideration are discussed. Some even broader issues that emerge from consideration of the relationships between the peaceful and military use of nuclear energy are also discussed. These are different notions of the meaning of nuclear proliferation, nuclear export policy, the need of a nuclear policy to be both a domestic as well as a foreign one, and political-military measures that can help reduce incentives of countries to acquire nuclear weapons of their own

  11. Violence as a Vicious Cycle

    Directory of Open Access Journals (Sweden)

    Huseyin Gulec

    2012-03-01

    Full Text Available Since the conclusion that the violence as a behavior is not (cannot be determined within an absolute genetic determinism has been reached for long years, environmental factors are increasingly examined. We witness that human behavior in society can easily convert into coping with stressful events with violence. Individual or social violence as a behavior has a similar pattern with violence committed in primitive society and by children. After a brief review of violence, its description, etiological theories and types, this article majorly focuses on children and their early and late response to violence. The purpose here is to draw attention to the individuals who were previously exposed to violence (either directly or indirectly resort to violence, perpetuating a vicious cycle.

  12. Business cycles in oil economies

    International Nuclear Information System (INIS)

    Al-Mutairi, N.H.

    1991-01-01

    This study examines the impact of oil price shocks on output fluctuations of several oil-exporting economies. In most studies of business cycles, the role of oil price is ignored; the few studies that use oil price as one of the variables in the system focus on modeling oil-importing economies. The vector autoregression (VAR) technique is used to consider the cases of Norway, Nigeria, and Mexico. Both atheoretical and 'structural' VARs are estimated to determine the importance of oil price impulses on output variations. The study reports two types of results: variance decomposition and impulse response functions, with particular emphasis on the issues of stationarity and co-integration among the series. The empirical results suggest that shocks to oil price are important in explaining output variations. In most cases, shocks to oil price are shown to explain more than 20% of the forecast variance of output over a 40-quarter horizon

  13. Sustainability of Advanced Fuel Cycles

    International Nuclear Information System (INIS)

    Kuznetsov, Vladimir

    2013-01-01

    ⇒ The IAEA’s International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO) was established in 2000. ⇒ INPRO cooperates with Member States to ensure that sustainable nuclear energy is available to help meet the energy needs of the 21st century. ⇒ INPRO is part of the integrated services of the IAEA provided to Member States considering initial development or expansion of nuclear energy programmes. ⇒ INPRO Methodology for nuclear energy system assessment - a comprehensive set of internationally agreed basic principles, requirements and criteria in the important areas of economics, safety, waste management, proliferation resistance, physical protection, environment and infrastructure. ⇒ Meeting the INPRO criteria in all of the areas ensures sustainability of nuclear energy system and its high potential to meet growing energy demand throughout the present century

  14. Approximating the minimum cycle mean

    Directory of Open Access Journals (Sweden)

    Krishnendu Chatterjee

    2013-07-01

    Full Text Available We consider directed graphs where each edge is labeled with an integer weight and study the fundamental algorithmic question of computing the value of a cycle with minimum mean weight. Our contributions are twofold: (1 First we show that the algorithmic question is reducible in O(n^2 time to the problem of a logarithmic number of min-plus matrix multiplications of n-by-n matrices, where n is the number of vertices of the graph. (2 Second, when the weights are nonnegative, we present the first (1 + ε-approximation algorithm for the problem and the running time of our algorithm is ilde(O(n^ω log^3(nW/ε / ε, where O(n^ω is the time required for the classic n-by-n matrix multiplication and W is the maximum value of the weights.

  15. Closed cycle gas dynamic laser

    International Nuclear Information System (INIS)

    Pinsley, E.A.

    1975-01-01

    The device includes a closed cycle gasdynamic laser wherein the lasing fluid is recirculated in a closed loop. The closed loop includes a nozzle array, a lasing cavity and a diffuser. The exit of the diffuser is connected to the inlet to the nozzle array with a fuel heat exchanger located in the lasing flow and a pumping means located between the heat exchanger and the nozzle array. To provide for cooling of the pumping means and to improve diffuser performance, gas bled from the diffuser is cooled by two heat exchangers and pumped into cooling passages in the pumping means. The heat exchangers for cooling the flow to the pumping means are located in series and carry fuel from a supply to an injector in said combustor and the heat exchanger in the lasing flow cools the fluid and carries the fuel from a supply to an injector in said combustor. (U.S.)

  16. Financing the nuclear fuel cycle

    International Nuclear Information System (INIS)

    Stephany, M.

    1975-01-01

    While conventional power stations usually have fossil fuel reserves for only a few weeks, nuclear power stations, because of the relatively long time required for uranium processing from ore extraction to the delivery of the fuel elements and their prolonged in-pile time, require fuel reserves for a period of several years. Although the specific fuel costs of nuclear power stations are much lower than those of conventional power stations, this results in consistently higher financial requirements. But the problems involved in financing the nuclear fuel do not only include the aspect of financing the requirements of reactor operators, but also of financing the facilities of the nuclear fuel cycle. As far as the fuel supply is concerned, the true financial requirements greatly exceed the mere purchasing costs because the costs of financing are rather high as a consequence of the long lead times. (orig./UA) [de

  17. Thorium nuclear fuel cycle technology

    International Nuclear Information System (INIS)

    Eom, Tae Yoon; Do, Jae Bum; Choi, Yoon Dong; Park, Kyoung Kyum; Choi, In Kyu; Lee, Jae Won; Song, Woong Sup; Kim, Heong Woo

    1998-03-01

    Since thorium produces relatively small amount of TRU elements after irradiation in the reactor, it is considered one of possible media to mix with the elements to be transmuted. Both solid and molten-salt thorium fuel cycles were investigated. Transmutation concepts being studied involved fast breeder reactor, accelerator-driven subcritical reactor, and energy amplifier with thorium. Long-lived radionuclides, especially TRU elements, could be separated from spent fuel by a pyrochemical process which is evaluated to be proliferation resistance. Pyrochemical processes of IFR, MSRE and ATW were reviewed and evaluated in detail, regarding technological feasibility, compatibility of thorium with TRU, proliferation resistance, their economy and safety. (author). 26 refs., 22 figs

  18. Safeguarding the Plutonium Fuel Cycle

    International Nuclear Information System (INIS)

    Johnson, S.J.; Lockwood, D.

    2013-01-01

    In developing a Safeguards Approach for a plutonium process facility, two general diversion and misuse scenarios must be addressed: 1) Unreported batches of undeclared nuclear material being processed through the plant and bypassing the accountancy measurement points, and 2) The operator removing plutonium at a rate that cannot be detected with confidence due to measurement uncertainties. This paper will look at the implementation of international safeguards at plutonium fuel cycle facilities in light of past lessons learned and current safeguards approaches. It will then discuss technical areas which are currently being addressed as future tools to improve on the efficiency of safeguards implementation, while maintaining its effectiveness. The discussion of new improvements will include: safeguards by design (SBD), process monitoring (PM), measurement and monitoring equipment, and data management. The paper is illustrated with the implementation of international safeguards at the Rokkasho Reprocessing Plant in Japan and its accountancy structure is detailed. The paper is followed by the slides of the presentation

  19. Global biogeochemical cycle of vanadium.

    Science.gov (United States)

    Schlesinger, William H; Klein, Emily M; Vengosh, Avner

    2017-12-26

    Synthesizing published data, we provide a quantitative summary of the global biogeochemical cycle of vanadium (V), including both human-derived and natural fluxes. Through mining of V ores (130 × 10 9 g V/y) and extraction and combustion of fossil fuels (600 × 10 9 g V/y), humans are the predominant force in the geochemical cycle of V at Earth's surface. Human emissions of V to the atmosphere are now likely to exceed background emissions by as much as a factor of 1.7, and, presumably, we have altered the deposition of V from the atmosphere by a similar amount. Excessive V in air and water has potential, but poorly documented, consequences for human health. Much of the atmospheric flux probably derives from emissions from the combustion of fossil fuels, but the magnitude of this flux depends on the type of fuel, with relatively low emissions from coal and higher contributions from heavy crude oils, tar sands bitumen, and petroleum coke. Increasing interest in petroleum derived from unconventional deposits is likely to lead to greater emissions of V to the atmosphere in the near future. Our analysis further suggests that the flux of V in rivers has been incremented by about 15% from human activities. Overall, the budget of dissolved V in the oceans is remarkably well balanced-with about 40 × 10 9 g V/y to 50 × 10 9 g V/y inputs and outputs, and a mean residence time for dissolved V in seawater of about 130,000 y with respect to inputs from rivers.

  20. Introducing advanced nuclear fuel cycles in Canada

    International Nuclear Information System (INIS)

    Duret, M.F.

    1978-05-01

    The ability of several different advanced fuel cycles to provide energy for a range of energy growth scenarios has been examined for a few special situations of interest in Canada. Plutonium generated from the CANDU-PHW operating on natural uranium is used to initiate advanced fuel cycles in the year 2000. The four fuel cycles compared are: 1) natural uranium in the CANDU-PHW; 2) high burnup thorium cycle in the CANDU-PHW; 3) self-sufficient thorium cycle in the CANDU-PHW; 4) plutonium-uranium cycle in a fast breeder reactor. The general features of the results are quite clear. While any plutonium generated prior to the introduction of the advanced fuel cycle remains, system requirements for natural uranium for each of the advanced fuel cycles are the same and are governed by the rate at which plants operating on natural uranium can be retired. When the accumulated plutonium inventory has been entirely used, natural uranium is again required to provide inventory for the advanced fuel cycle reactors. The time interval during which no uranium is required varies only from about 25 to 40 years for both thorium cycles, depending primarily on the energy growth rate. The breeder does not require the entire plutonium inventory produced and so would call for less processing of fuel from the PHW reactors. (author)

  1. Economic comparison of fusion fuel cycles

    International Nuclear Information System (INIS)

    Brereton, S.J.; Kazimi, M.S.

    1987-01-01

    The economics of the DT, DD, and DHe fusion fuel cycles are evaluated by comparison on a consistent basis. The designs for the comparison employ HT-9 structure and helium coolant; liquid lithium is used as the tritium breeding material for the DT fuel cycle. The reactors are pulsed, superconducting tokamaks, producing 1200 MW of electric power. The DT and DD designs scan a range of values of plasma beta, assuming first stability scaling laws. The results indicate that on a purely economic basis, the DT fuel cycle is superior to both of the advanced fuel cycles. Geometric factors, materials limitations, and plasma beta were seen to have an impact on the Cost of Electricity (COE). The economics for the DD fuel cycle are more strongly affected by these parameters than is the DT fuel cycle. Fuel costs are a major factor in determining the COE for the DHe fuel cycle. Based on costs directly attributable to the fuel cycle, the DT fuel cycle appears most attractive. Technological advances, improved understanding of physics, or strides in advanced energy conversion schemes may result in altering the economic ranking of the fuel cycles indicated here. 7 refs., 6 figs., 2 tabs

  2. Study on the supercritical CO2 power cycles for landfill gas firing gas turbine bottoming cycle

    International Nuclear Information System (INIS)

    Kim, Min Seok; Ahn, Yoonhan; Kim, Beomjoo; Lee, Jeong Ik

    2016-01-01

    In this paper, a comparison of nine supercritical carbon dioxide (S-CO 2 ) bottoming power cycles in conjunction with a topping cycle of landfill gas (LFG) fired 5MWe gas turbine is presented. For the comparison purpose, a sensitivity study of the cycle design parameters for nine different cycles was conducted and each cycle thermodynamic performance is evaluated. In addition, the cycle performance evaluation dependency on the compressor inlet temperature variation is performed to investigate how S-CO 2 cycles sensitive to the heat sink temperature variation. Furthermore, the development of new S-CO 2 cycle layouts is reported and the suggested cycles' performances are compared to the existing cycle layouts. It was found that a recompression cycle is not suitable for the bottoming cycle application, but a partial heating cycle has relatively higher net produced work with a simple layout and small number of components. Although a dual heated and flow split cycle has the highest net produced work, it has disadvantages of having numerous components and complex process which requires more sophisticated operational strategies. This study identified that the recuperation process is much more important than the intercooling process to the S-CO 2 cycle design for increasing the thermal efficiency and the net produced work point of view. - Highlights: • Study of nine S-CO 2 power cycle layouts for a small scale landfill gas power generation application. • Development of new S-CO 2 cycle layouts. • Sensitivity analysis of S-CO 2 cycles to evaluate and compare nine cycles' performances.

  3. A nuclear glutathione cycle within the cell cycle.

    Science.gov (United States)

    Diaz Vivancos, Pedro; Wolff, Tonja; Markovic, Jelena; Pallardó, Federico V; Foyer, Christine H

    2010-10-15

    The complex antioxidant network of plant and animal cells has the thiol tripeptide GSH at its centre to buffer ROS (reactive oxygen species) and facilitate cellular redox signalling which controls growth, development and defence. GSH is found in nearly every compartment of the cell, including the nucleus. Transport between the different intracellular compartments is pivotal to the regulation of cell proliferation. GSH co-localizes with nuclear DNA at the early stages of proliferation in plant and animal cells. Moreover, GSH recruitment and sequestration in the nucleus during the G1- and S-phases of the cell cycle has a profound impact on cellular redox homoeostasis and on gene expression. For example, the abundance of transcripts encoding stress and defence proteins is decreased when GSH is sequestered in the nucleus. The functions of GSHn (nuclear GSH) are considered in the present review in the context of whole-cell redox homoeostasis and signalling, as well as potential mechanisms for GSH transport into the nucleus. We also discuss the possible role of GSHn as a regulator of nuclear proteins such as histones and PARP [poly(ADP-ribose) polymerase] that control genetic and epigenetic events. In this way, a high level of GSH in the nucleus may not only have an immediate effect on gene expression patterns, but also contribute to how cells retain a memory of the cellular redox environment that is transferred through generations.

  4. Automatic control of clock duty cycle

    Science.gov (United States)

    Feng, Xiaoxin (Inventor); Roper, Weston (Inventor); Seefeldt, James D. (Inventor)

    2010-01-01

    In general, this disclosure is directed to a duty cycle correction (DCC) circuit that adjusts a falling edge of a clock signal to achieve a desired duty cycle. In some examples, the DCC circuit may generate a pulse in response to a falling edge of an input clock signal, delay the pulse based on a control voltage, adjust the falling edge of the input clock signal based on the delayed pulse to produce an output clock signal, and adjust the control voltage based on the difference between a duty cycle of the output clock signal and a desired duty cycle. Since the DCC circuit adjusts the falling edge of the clock cycle to achieve a desired duty cycle, the DCC may be incorporated into existing PLL control loops that adjust the rising edge of a clock signal without interfering with the operation of such PLL control loops.

  5. Multidimensional evaluation on FR cycle systems

    International Nuclear Information System (INIS)

    Nakai, Ryodai; Fujii, Sumio; Takakuma, Katsuyuki; Katoh, Atsushi; Ono, Kiyoshi; Ohtaki, Akira; Shiotani, Hiroki

    2004-01-01

    This report explains some results of the multidimensional evaluation on various fast reactor cycle system concepts from an interim report of the 2nd phase of ''Feasibility Study on Commercialized FR Cycle System''. This method is designed to give more objective and more quantitative evaluations to clarify commercialized system candidate concepts. Here we brief current evaluation method from the five viewpoints of safety, economy, environment, resource and non-proliferation, with some trial evaluation results for some cycles consist of promising technologies in reactor, core and fuel, reprocessing and fuel manufacture. Moreover, we describe FR cycle deployment scenarios which describe advantages and disadvantages of the cycles from the viewpoints of uranium resource and radioactive waste based on long-term nuclear material mass flow analyses and advantages of the deployment of FR cycle itself from the viewpoints of the comparison with alternative power supplies as well as cost and benefit. (author)

  6. Life cycle of transformer oil

    Directory of Open Access Journals (Sweden)

    Đurđević Ksenija R.

    2008-01-01

    Full Text Available The consumption of electric power is constantly increasing due to industrialization and population growth. This results in much more severe operating conditions of transformers, the most important electrical devices that make integral parts of power transmission and distribution systems. The designed operating life of the majority of worldwide transformers has already expired, which puts the increase of transformer reliability and operating life extension in the spotlight. Transformer oil plays a very important role in transformer operation, since it provides insulation and cooling, helps extinguishing sparks and dissolves gases formed during oil degradation. In addition to this, it also dissolves moisture and gases from cellulose insulation and atmosphere it is exposed to. Further and by no means less important functions of transformer are of diagnostic purpose. It has been determined that examination and inspection of insulation oil provide 70% of information on transformer condition, which can be divided in three main groups: dielectric condition, aged transformer condition and oil degradation condition. By inspecting and examining the application oil it is possible to determine the condition of insulation, oil and solid insulation (paper, as well as irregularities in transformer operation. All of the above-mentioned reasons and facts create ground for the subject of this research covering two stages of transformer oil life cycle: (1 proactive maintenance and monitoring of transformer oils in the course of utilization with reference to influence of transformer oil condition on paper insulation condition, as well as the condition of the transformer itself; (2 regeneration of transformer oils for the purpose of extension of utilization period and paper insulation revitalization potential by means of oil purification. The study highlights advantages of oil-paper insulation revitalization over oil replacement. Besides economic, there are

  7. Nuclear reactors and fuel cycle

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-07-01

    fulfill its mission that is to contribute in improving the quality of life of the Brazilian people. The nuclear fuel cycle is a series of steps involved in the production and use of fuel for nuclear reactors. The Laboratories of Chemistry and Environmental Diagnosis Center, CQMA, support the demand of Nuclear Fuel Cycle Program providing chemical characterization of uranium compounds and other related materials. In this period the Research Reactor Center (CRPq) concentrated efforts on improving equipment and systems to enable the IEA-R1 research reactor to operate at higher power, increasing the capacity of radioisotopes production, samples irradiation, tests and experiments. (author)

  8. Nuclear reactors and fuel cycle

    International Nuclear Information System (INIS)

    2014-01-01

    to contribute in improving the quality of life of the Brazilian people. The nuclear fuel cycle is a series of steps involved in the production and use of fuel for nuclear reactors. The Laboratories of Chemistry and Environmental Diagnosis Center, CQMA, support the demand of Nuclear Fuel Cycle Program providing chemical characterization of uranium compounds and other related materials. In this period the Research Reactor Center (CRPq) concentrated efforts on improving equipment and systems to enable the IEA-R1 research reactor to operate at higher power, increasing the capacity of radioisotopes production, samples irradiation, tests and experiments. (author)

  9. Stereo and Solar Cycle 24

    Science.gov (United States)

    Kaise,r Michael L.

    2008-01-01

    The twin STEREO spacecrafi, launched in October 2006, are in heliocentric orbits near 4 AU with one spacecraft (Ahead) leading Earth in its orbit around the Sun and the other (Behind) trailing Earth. As viewed from the Sun, the STEREO spacecraft are continually separating from one another at about 45 degrees per year with Earth biseding the angle. At present, th@spaser=raft are a bit more than 45 degrees apart, thus they are able to each 'vie@ ground the limb's of the Sun by about 23 degrees, corresponding to about 1.75 days of solar rotation. Both spameraft contain an identical set of instruments including an extreme ultraviolet imager, two white light coronagraphs, tws all-sky imagers, a wide selection of energetic particle detectors, a magnetometer and a radio burst tracker. A snapshot of the real time data is continually broadcast to NOW-managed ground stations and this small stream of data is immediately sent to the STEREO Science Center and converted into useful space weather data within 5 minutes of ground receipt. The resulting images, particle, magnetometer and radio astronomy plots are available at j g i t , : gAs timqe conting ues ijnto . g solar cycle 24, the separation angle becomes 90 degrees in early 2009 and 180 degrees in early 201 1 as the activity heads toward maximum. By the time of solar maximum, STEREO will provide for the first time a view of the entire Sun with the mronagraphs and e*reme ultraviolet instruments. This view wilt allow us to follow the evolution of active regions continuously and also detect new active regions long before they pose a space weather threat to Earth. The in situ instruments will be able to provide about 7 days advanced notice of co-rotating structures in the solar wind. During this same intewal near solar maximum, the wide-angle imagers on STEREB will both be ;able to view EarlCP-dirsted CMEs in their plane-oPsky. When combined with Eat-lhorbiting assets available at that time, it seems solar cycle 24 will mark a

  10. Overview of the nuclear fuel cycle

    International Nuclear Information System (INIS)

    Knief, R.A.

    1978-01-01

    The nuclear fuel cycle is substantially more complicated than the energy production cycles of conventional fuels because of the very low abundance of uranium 235, the presence of radioactivity, the potential for producing fissile nuclides from irradiation, and the risk that fissile materials will be used for nuclear weapons. These factors add enrichment, recycling, spent fuel storage, and safeguards to the cycle, besides making the conventional steps of exploration, mining, processing, use, waste disposal, and transportation more difficult

  11. Business Cycle Synchronization and Regional Integration

    OpenAIRE

    Fiess, Norbert

    2007-01-01

    Deeper trade integration between Central America and the United States, as envisaged under the Central American Free Trade Agreement, is likely to lead to closer links between Central American and U.S. business cycles. This article assesses the degree of business cycle synchronization between Central America and the United States—relevant not only for a better understanding of the influence of important trading partners on the business cycle fluctuations in the domestic economy but for evalua...

  12. Feasibility study on tandem fuel cycle

    International Nuclear Information System (INIS)

    Han, P.S.; Suh, I.S.; Rim, C.S.; Kim, B.K.; Suh, K.S.; Ro, S.K.; Juhn, P.I.; Kim, S.Y.

    1983-01-01

    The objective of this feasibility study is to review and assess the current state of technology concerning the tandem fuel cycle. Based on the results from this study, a long-term development plan suitable for Korea has been proposed for this cycle, i.e., the PWR → CANDU tandem fuel cycle which used plutonium and uranium, recovered from spent PWR fuel by co-processing, as fuel material for CANDU reactors. (Author)

  13. Epigenetic dynamics across the cell cycle

    DEFF Research Database (Denmark)

    Kheir, Tony Bou; Lund, Anders H.

    2010-01-01

    Progression of the mammalian cell cycle depends on correct timing and co-ordination of a series of events, which are managed by the cellular transcriptional machinery and epigenetic mechanisms governing genome accessibility. Epigenetic chromatin modifications are dynamic across the cell cycle...... a correct inheritance of epigenetic chromatin modifications to daughter cells. In this chapter, we summarize the current knowledge on the dynamics of epigenetic chromatin modifications during progression of the cell cycle....

  14. Introductory remarks about the international fuel cycle

    International Nuclear Information System (INIS)

    Wolfe, B.

    1989-01-01

    The reason why nuclear power has promise is because of the promise of its fuel cycle. The fuel cycle is in fairly good shape and has demonstrated the characteristics of good economics, good general characterization, and good maintenance of the various parts of the fuel cycle. The thermal recycling of fuel is an area in which the economics have changed to the point that, at least in many parts of the world, it's no longer economical

  15. Empirical solar/stellar cycle simulations

    Directory of Open Access Journals (Sweden)

    Santos Ângela R. G.

    2015-01-01

    Full Text Available As a result of the magnetic cycle, the properties of the solar oscillations vary periodically. With the recent discovery of manifestations of activity cycles in the seismic data of other stars, the understanding of the different contributions to such variations becomes even more important. With this in mind, we built an empirical parameterised model able to reproduce the properties of the sunspot cycle. The resulting simulations can be used to estimate the magnetic-induced frequency shifts.

  16. Nonproliferation characteristics of advanced fuel cycle concepts

    International Nuclear Information System (INIS)

    Persiani, P.J.

    1998-01-01

    The purpose of this study is to comment on the proliferation characteristic profiles of some of the proposed fuel cycle alternatives to help ensure that nonproliferation concerns are introduced into the early stages of a fuel cycle concept development program, and to perhaps aid in the more effective implementation of the international nonproliferation regime initiatives and safeguards methods and systems. Alternative cycle concepts proposed by several countries involve the recycle of spent fuel without the separation of plutonium from uranium and fission products

  17. Fuel cycle parameters for strategy studies

    International Nuclear Information System (INIS)

    Archinoff, G.H.

    1979-05-01

    This report summarizes seven fuel cycle parameters (efficiency, specific power, burnup, equilibrium net fissile feed, equilibrium net fissile surplus, first charge fissile content, and whether or not fuel reprocessing is required) to be used in long-term strategy analyses of fuel cycles based on natural UO 2 , low enriched uranium, mixed oxides, plutonium topped thorium, uranium topped thorium, and the fast breeder oxide cycle. (LL)

  18. Finance in the Theory of Business Cycles

    OpenAIRE

    Indrajit, Mallick

    2008-01-01

    Abstract The question of aggregate welfare over time makes business cycle studies important. Finance studies allocation of resources under uncertainty. Thus both these fields of study dwell on intertemporal resource allocation under uncertainty. This paper attempts to shed light on how finance can be integrated into business cycle theory to provide richer and deeper insights than the standard real business cycle theory. JEL Classification: E32, E44, G

  19. Will Solar Cycles 25 and 26 Be Weaker than Cycle 24?

    Science.gov (United States)

    Javaraiah, J.

    2017-11-01

    The study of variations in solar activity is important for understanding the underlying mechanism of solar activity and for predicting the level of activity in view of the activity impact on space weather and global climate. Here we have used the amplitudes (the peak values of the 13-month smoothed international sunspot number) of Solar Cycles 1 - 24 to predict the relative amplitudes of the solar cycles during the rising phase of the upcoming Gleissberg cycle. We fitted a cosine function to the amplitudes and times of the solar cycles after subtracting a linear fit of the amplitudes. The best cosine fit shows overall properties (periods, maxima, minima, etc.) of Gleissberg cycles, but with large uncertainties. We obtain a pattern of the rising phase of the upcoming Gleissberg cycle, but there is considerable ambiguity. Using the epochs of violations of the Gnevyshev-Ohl rule (G-O rule) and the `tentative inverse G-O rule' of solar cycles during the period 1610 - 2015, and also using the epochs where the orbital angular momentum of the Sun is steeply decreased during the period 1600 - 2099, we infer that Solar Cycle 25 will be weaker than Cycle 24. Cycles 25 and 26 will have almost same strength, and their epochs are at the minimum between the current and upcoming Gleissberg cycles. In addition, Cycle 27 is expected to be stronger than Cycle 26 and weaker than Cycle 28, and Cycle 29 is expected to be stronger than both Cycles 28 and 30. The maximum of Cycle 29 is expected to represent the next Gleissberg maximum. Our analysis also suggests a much lower value (30 - 40) for the maximum amplitude of the upcoming Cycle 25.

  20. Nonlinear solar cycle forecasting: theory and perspectives

    Science.gov (United States)

    Baranovski, A. L.; Clette, F.; Nollau, V.

    2008-02-01

    In this paper we develop a modern approach to solar cycle forecasting, based on the mathematical theory of nonlinear dynamics. We start from the design of a static curve fitting model for the experimental yearly sunspot number series, over a time scale of 306 years, starting from year 1700 and we establish a least-squares optimal pulse shape of a solar cycle. The cycle-to-cycle evolution of the parameters of the cycle shape displays different patterns, such as a Gleissberg cycle and a strong anomaly in the cycle evolution during the Dalton minimum. In a second step, we extract a chaotic mapping for the successive values of one of the key model parameters - the rate of the exponential growth-decrease of the solar activity during the n-th cycle. We examine piece-wise linear techniques for the approximation of the derived mapping and we provide its probabilistic analysis: calculation of the invariant distribution and autocorrelation function. We find analytical relationships for the sunspot maxima and minima, as well as their occurrence times, as functions of chaotic values of the above parameter. Based on a Lyapunov spectrum analysis of the embedded mapping, we finally establish a horizon of predictability for the method, which allows us to give the most probable forecasting of the upcoming solar cycle 24, with an expected peak height of 93±21 occurring in 2011/2012.