Induction of somatic mutations in some vegetatively Propagated ornamentals by gamma radiation

International Nuclear Information System (INIS)

Das, P.K.; Ghosh, P.; Dube, S.; Dhua, S.P.

1974-01-01

Attempts were made to produce mutations in some vegetatively propagated ornamentals by acute and chronic gamma irradiation. Rooted cutting of Chrysanthemums and dormant bulbs of Dahlias were exposed to 1.5, 2.5, 3.5 and 2.0, 3.0 kR of acute doses respectively. In chronic irradiation, potted plants of Bougainvillea, Hibiscus, Allamanda, Achania, Jasminum, Chrysanthemum were exposed to several dose rates at different isodose arcs in the gamma field. Isolated mutants are being vegetatively multiplied and some of them have already been stabilized as pure forms. (M.G.B.)

Recent advances in modified atmosphere packaging and edible coatings to maintain quality of fresh-cut fruits and vegetables.

Science.gov (United States)

Ghidelli, Christian; Pérez-Gago, María B

2018-03-04

Processing of fruits and vegetables generates physiological stresses in the still living cut tissue, leading to quality deterioration and shorter shelf life as compared with fresh intact produces. Several strategies can be implemented with the aim to reduce the rate of deterioration of fresh-cut commodities. Such strategies include low temperature maintenance from harvest to retail and the application of physical and chemical treatments such as modified atmosphere packaging (MAP) with low O 2 and high CO 2 levels and antioxidant dips. Other technologies such as edible coatings with natural additives, new generation of coatings using nanotechnological solutions such as nanoparticles, nanoencapsulation, and multilayered systems, and nonconventional atmospheres such as the use of pressurized inert/noble gases and high levels of O 2 have gained a lot of interest as a possibility to extend the shelf life of minimally processed fruits and vegetables. However, the high perishability of these products challenges in many cases their marketability by not achieving sufficient shelf life to survive the distribution system, requiring the combination of treatments to assure safety and quality. This review reports the recent advances in the use of MAP, edible coatings, and the combined effect of both technologies to extend the shelf life of fresh-cut fruits and vegetables.

Evaluation of soil resources for sustained vegetative cover of cut-slopes along I-70 near Straight Creek.

Science.gov (United States)

2013-07-01

Revegetation of high elevation decomposed granite cut-slopes often requires repeated applications of soil : amendments to attain sustained vegetative cover. Plant transects from slopes west of the Eisenhower Tunnel from : 2007 to 2012 showed that cov...

Use of irradiation to ensure the hygienic quality of fresh, pre-cut fruits and vegetables and other minimally processed food of Plant Origin. Proceedings of a final research coordination meeting

International Nuclear Information System (INIS)

2006-12-01

Sales and consumption of fresh pre-cut and minimally processed fruits and vegetables continue to grow. Changes occurring in life and eating styles, as well as demographic changes, have been cited as one of the reasons for the increasing demand for this type of produce. Since fresh fruits and vegetables are grown, processed or packaged in areas that may be exposed to microbial pathogen contamination, there is an increasing concern that these products may harbour microbial pathogens. In fact, a number of outbreaks linked to the consumption of contaminated fresh pre-cut fruits and vegetables have been reported. Prior to this Coordinated Research Project (CRP), studies on various chemical and physical methods of decontamination for their efficacy in destroying pathogens have been made. The use of ionizing radiation seems to have several advantages in relation to other alternative treatments; however more research was needed in order to demonstrate its efficacy without producing negative effects in the physiological traits of the fruit, and thus the commercial quality of these products. The Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture initiated in 2001 a Coordinated Research Project (CRP) on the Use of Irradiation to Ensure Hygienic Quality of Fresh, Pre-cut Fruits and Vegetables and other Minimally Processed Food of Plant Origin. This CRP included 15 participants from Argentina, Brazil, Canada, Chile, China, Egypt, Hungary, India, Malaysia, Pakistan, Portugal, Turkey, United Kingdom and the United States of America (2). Research coordinated meetings were held in Rio de Janeiro, Brazil (5-9 November 2001), Belfast, UK (14-18 April 2003) and Islamabad, Pakistan (25-29 July 2005). This publication presents the research results presented in the final research coordination meeting, where the work completed during the last five years (2001-2005) was analysed

Biodegradable packaging and edible coating for fresh-cut fruits and vegetables

Directory of Open Access Journals (Sweden)

Fernanda Galgano

2015-03-01

Full Text Available This work focuses on biodegradable packaging and edible coatings applied to fresh-cut fruits and vegetables and their effects on the product quality. Practical applications are mainly limited to the use of biodegradable materials that, however, do not allow full control of the product moisture loss. Better results can be achieved by the combined use of biodegradable packagings with edible coatings and recent research has shown that enrichment with silver montmorillonite nanoparticles may be a promising technique. However, the actual utilization of these materials is still limited, due to the high costs of the raw materials and the limited production.

Influence of Vegetable Oil-Based Controlled Cutting Fluid Impinging Supply System on Micro Hardness in Machining of Ti-6Al-4V

OpenAIRE

Salah Gariani; Islam Shyha; Fawad Inam; Dehong Huo

2017-01-01

A controlled cutting fluid impinging supply system (CUT-LIST) was developed to deliver an accurate amount of cutting fluid into the machining zone via well-positioned coherent nozzles based on a calculation of the heat generated. The performance of the CUT-LIST was evaluated against a conventional flood cutting fluid supply system during step shoulder milling of Ti-6Al-4V using vegetable oil-based cutting fluid. In this paper, the micro-hardness of the machined surface was used as the main cr...

A New On-Line Detecting Apparatus of the Residual Chlorine in Disinfectant for Fresh-Cut Vegetables

Science.gov (United States)

Hu, Chao; Su, Shu-Qiang; Li, Bao-Guo; Liu, Meng-Fang

With the fast development of modern food and beverage industry, fresh-cut vegetables have wider application than before. During the process of sterilization in fresh-cut vegetables, the concentration of chloric disinfectant is usually so high that the common sensor can't be used directly on the product line. In order to solve this problem, we have invented a new detecting apparatus which could detect high concentration of chloric disinfectant directly. In this paper, the working principle, main monitor indicators, application and technical creations of the on-line apparatus have been discussed, and we also carried on the experimental analysis for its performance. The actual demands in factory could be met when the detecting flux is 2L/min, the dilution ratio is 15 and input amount of the disinfectant is 200ml per time, the max of the detecting deviation achieves ±4.8ppm(mg/L). The main detecting range of residual chlorine is 0~300ppm.

Grapevine fruiting cuttings: validation of an experimental system to study grapevine physiology. I. Main vegetative characteristics

Directory of Open Access Journals (Sweden)

Nathalie Ollat

1998-03-01

Full Text Available A method for producing fruiting cuttings of grapevine cv. Cabernet Sauvignon is described. The main developmental features of these cuttings are presented. The clusters reach maturity after 5 months and the period of cluster development is not shortened. Before flowering, a careful control of stem and leaf growth improves the partitioning of stored carbon towards the roots and the cluster. Vegetative growth occurs mainly between fruit set and veraison. During ripening, the leaf to fruit ratio is between 20 and 30 cm2 of leaf area per gram of fruit. In the cuttings as well as in grapevines from the vineyard, free polyamine content in the leafblade does not change during development. Conjugate polyamine content does not evolve in the same way. It peaks at veraison for vineyard leaves but decreases continuously for cuttings. A proper nutrient solution provides a minerai composition in accordance with viticultural requirements. The cuttings also behave like vineyard plants in response to different levels of potassium in the nutrient solution.

Control of spoiler Pseudomonas spp. on fresh cut vegetables by neutral electrolyzed water.

Science.gov (United States)

Pinto, Loris; Ippolito, Antonio; Baruzzi, Federico

2015-09-01

In the present study, we evaluated the antimicrobial activity of neutral electrolyzed water (NEW) against 14 strains of spoilage Pseudomonas of fresh cut vegetables under cold storage. The NEW, produced from solutions of potassium and sodium chloride, and sodium bicarbonate developed up to 4000 mg/L of free chlorine, depending on the salt and relative concentration used. The antimicrobial effect of the NEW was evaluated against different bacterial strains at 10(5) cells/ml, with different combinations of free chlorine concentration/contact time; all concentrations above 100 mg/L, regardless of the salt used, were found to be bactericidal already after 2 min. When catalogna chicory and lettuce leaves were dipped for 5 min in diluted NEW, microbial loads of mesophilic bacteria and Enterobacteriaceae were reduced on average of 1.7 log cfu/g. In addition, when lettuce leaves were dipped in a cellular suspension of the spoiler Pseudomonas chicorii I3C strain, diluted NEW was able to reduce Pseudomonas population of about 1.0 log cfu/g. Thanks to its high antimicrobial activity against spoilage microorganisms, and low cost of operation, the application of cycles of electrolysis to the washing water looks as an effective tool in controlling fresh cut vegetable microbial spoilage contamination occurring during washing steps. Copyright © 2015 Elsevier Ltd. All rights reserved.

LEAF-CUTTING ANTS Acromyrmex niger SMITH, 1858 (HYMENOPTERA; FORMICIDAE) USED AS BIOINDICATORS OF AGROTOXICS RESIDUES

OpenAIRE

Liriana Belizário Cantagalli; Denise Alves Lopes; Ana Lúcia Paes Barateiro Stuchi; Maria Claudia Colla Ruvolo Takasusuki

2014-01-01

Despite the condition of leaf-cutting ant pests in agroecosystems, it is undeniable the benefits they can bring in certain situations or environments. The leaf-cutting ants of the genus Acromyrmex attack mainly leaves of vegetables and fruit trees exposing not only to the agrochemicals used for their control as well as to those used for the control of other pests. Due to the bioindicator potential of environmental quality of the ants and their frequent exposure to agrochemicals such as organo...

Measurement and modelling ozone fluxes over a cut and fertilized grassland

Directory of Open Access Journals (Sweden)

R. Mészáros

2009-10-01

Full Text Available During the GRAMINAE Integrated Experiment between 20 May and 15 June 2000, the ozone flux was measured by the eddy covariance method above intensively managed grassland in Braunschweig, northern Germany. Three different phases of vegetation were covered during the measuring campaign: tall grass canopy before cut (29 May 2000, short grass after cut, and re-growing vegetation after fertilization (5 June 2000. Results show that beside weather conditions, the agricultural activities significantly influenced the O₃ fluxes. After the cut the daytime average of the deposition velocity (v_d decreased from 0.44 cm s⁻¹ to 0.26 cm s⁻¹ and increased again to 0.32 cm s⁻¹ during the third period. Detailed model calculations were carried out to estimate deposition velocity and ozone flux. The model captures the general diurnal patter of deposition, with v_d daytime values of 0.52, 0.24, and 0.35 cm s⁻¹ in the first, second and third period, respectively. Thus the model predicts a stronger response to the cut than the measurements, which is nevertheless smaller than expected on the basis of change in leaf area. The results show that both cut and fertilization have complex impacts on fluxes. Reduction of vegetation by cutting decreased the stomatal flux initially greatly, but the stomatal flux recovered to 80% of its original value within a week. At the same time, the non-stomatal flux appears to have increased directly after the cut, which the model partially explains by an increase in the deposition to the soil. A missing sink after the cut may be the chemical interaction with biogenic volatile organic compounds released after the cut and exposed senescent plant parts, or the increase in soil NO emissions after fertilization. Increased canopy temperatures may also have promoted ozone destruction on leaf surfaces. These results demonstrate the importance of canopy

Rooting of stem cuttings of ixora

Directory of Open Access Journals (Sweden)

Aline De Souza Silva

2015-08-01

Full Text Available The ixora is ornamental plant widely used in landscaping. In order to maximize the propagation of cuts, we evaluated the concentrations of auxin (indolbutiric acid and the presence of leaves on the rooting in cuts of Ixora coccinea L. The experiment was conducted in randomized block design, in factorial design 3x4, with three types of cuts (without leaf, with two or four leaves, four concentrations of indolbutiric acid (0, 1000, 2000 and 4000 mg L-1, with four replications and 10 cuts in each experimental unit. After 53 days of implantation the experiment, evaluated the survival(%, rooting(%, sprouting(%, formation of callus(%, number, length and biomass of roots formed. The interaction of the type of cuts with concentrations of auxin was not significant for any of the variables analyzed. The survival of cuttings was not influenced by the treatments. Cuts with two or four leaves presented rooting and length of roots above the cuttings without leaves. The application of auxin does not substitute the presence of leaf in cuts of ixora in vegetative propagation. The vegetative propagation by cut of ixora can be made without application of auxin, and the leaves must be maintained in the cuttings.

VEGETAL COVERING IN CUT SLOPES BY MEANS OF GEOCELLS OF RUBBERIZED SISAL BIOBLANKETS IN BRASILIA/DF, BRAZIL

Directory of Open Access Journals (Sweden)

Maurizio Sponga

2005-05-01

Full Text Available The strongly wavy relief transposition for implantation of highways has became intensely used in the last decades by means of tunnels, cuts and fillings, causing impacts to the landscape in result of some factors, as decapitation of surfaces, abrupt transformation of land morphology, disequilibrium of superficial and sub superficial water circulation, waste handling sistems, enchainment of erosive processes etc. As an alleviating measure of part of the impacts generated for the excavations for constructing the roadways, procedures of containment and vegetal resetting of surfaces for reduction of the erosive processes and stabilization of mass movements are adopted. The found terrain are very diversified and several occasions the vegetal covering becomes difficult in reason of the physical-chemical characteristics for germination to be inadequate. In areas of high risk to the occupation with stability problems, commonly they use covering with projected concrete for containment of hillsides, that parallelly causes strong environmental and visual impact in the intervention area, and furthermore, possibly, not consisting insolutions duly adequate or definitive for these situations.The search for alternatives is frequent in academic medium as much as in the private initiative for techniques for containment of hillsides and more economic erosion control, looking for lesser ambient impacts and better results. The search of these alternatives gradually becomes technically systemizing itself, aiming at the recovery of the conditions of dynamic balance of the impacted landscapes due to the explosive increase of social and environmental problems intrinsically related.In this direction, it will be presented the description of a work of vegetal covering by grass in plates, antierosive bioblanket and geocells in fibers of rubberized sisal for the confinement of soil in cut slopes of a highway in Brasilia/DF, in Brazil. This technique presented excellent

Rooting Platanus (Platanus acerifolia (Aiton Willd. cuttings in Marechal Cândido Rondon - PR, Brazil: Influence of lesions at cutting bases and depth of planting

Directory of Open Access Journals (Sweden)

Danimar Dalla Rosa

2018-01-01

Full Text Available Platanus, an arboreal and deciduous plant, is widely adapted and can be used for several purposes. Despite producing viable seeds, production of platanus seedlings usually occurs through vegetative propagation; cuttings are the best and most efficient source for obtaining seedlings. Although cuttings offer a practical and easy method to obtain seedlings in different vegetable species, they are influenced by several factors, both external and internal. The present study aimed to analyze the behavior of plantain cuttings planted in sand subjected to damage or no damage at the cuttings base, and planted at depths of 20 and 40 cm. Experiment was carried out at the experimental station of horticulture and protected cultivation of UNIOESTE-Brazil, in a randomized 2×2 factorial design, which comprises both, planted at 20 cm and 40 cm depths, with 5 replicates and 5 cuttings per replicate. After 170 days of incubation, injured and non- injured cuttings, were evaluated for rooting percentage and cuttings sprouted, length of roots and medium length of stems, stem diameter, number of leaves per stem, and dry mass of roots and shoots. No significant differences were observed in cutting injury. All variables analyzed presented higher values when cuttings were planted at 20 cm depth. Results indicate that planting of platanus cuttings at 20 cm depth leads to better rooting rates and vegetative development.

Enhancing safety and aroma appealing of fresh-cut fruits and vegetables using the antimicrobial and aromatic power of essential oils.

Science.gov (United States)

Ayala-Zavala, J Fernando; González-Aguilar, Gustavo A; del-Toro-Sánchez, L

2009-09-01

Microbial and aroma attributes are within the most decisive factors limiting safety and sensory appealing of fresh-cut fruits and vegetables. Alternatively, several plant essential oils (EOs) are constituted of several volatile active compounds and most of them present antimicrobial potential and had different aroma profile. Considering these premises, this hypothesis article states that safety and aroma appealing of fresh-cut produce could be improved with EO treatment. EOs could prevent fresh-cut fruit decay; however, their volatile constituents could be sorbed by the produce, and according to the aroma notes of the antimicrobial oil, sensorial appealing of odor, and flavor of the treated produce might be affected positively or negatively. Specifically, garlic oil is a natural antimicrobial constituted by sulfur compounds, which are responsible for its odor and antimicrobial properties. Besides, fresh-cut tomato is a highly perishable product that needs antimicrobial agents to preserve its quality and safety for a longer period of time. From the sensorial point of view, aroma combination of garlic and tomato is a common seasoning practice in Europe and America and well accepted by consumers. Once the right combination of flavors between the EOs and the fresh-cut produce has been selected, safety and quality of the treated fruit could be improved by adding antimicrobial protection and extra aroma. Therefore, other combinations between EOs and fresh-cut produce are discussed. This approximation could reinforce the trends of natural food preservation, accomplishing the demands of the increasing sector of consumers demanding tasty and convenient fresh-cut produce, containing only natural ingredients.

[Dynamics of vegetative indicators induced by low-frequency magnetotherapy and EHF-puncture in hypertensive workers exposed to vibration].

Science.gov (United States)

Drobyshev, V A; Efremov, A V; Loseva, M I; Sukharevskaia, T M; Michurin, A I

2002-01-01

Low-frequency magnetic fields and EHF-therapy have been used in correction of autonomic homeostasis in workers exposed to vibration for different periods of time. The workers suffered from early arterial hypertension. Vegetative status and central hemodynamics improved best in workers exposed to vibration for less than 5 years. If the exposure was 6-15 years, a positive trend occurred in the tension of regulatory mechanisms. Workers with long exposure to vibration suffering from vagotonia showed an inadequate response of the autonomic parameters to treatment. This necessitates enhancement of therapeutic measures with medicines.

Inheritance of fresh-cut fruit quality attributes in Capsicum

Science.gov (United States)

The fresh-cut fruit and vegetable industry has expanded rapidly during the past decade, due to freshness, convenience and the high nutrition that fresh-cut produce offers to consumers. The current report evaluates the inheritance of postharvest attributes that contribute to pepper fresh-cut product...

Disinfection potential of ozone, ultraviolet-C and their combination in wash water for the fresh-cut vegetable industry.

Science.gov (United States)

Selma, María V; Allende, Ana; López-Gálvez, Francisco; Conesa, María A; Gil, María I

2008-09-01

The purpose of this research was to investigate the disinfection efficacy of ozone (O(3)) and UV-C illumination (UV), and their combination (O(3)-UV) for reducing microbial flora of fresh-cut onion, escarole, carrot, and spinach wash waters collected from the industry. Furthermore, the influence of water physicochemical parameters on the decontamination efficacy and the effect of these technologies on physicochemical quality of wash water were analyzed. O(3), UV, and O(3)-UV were effective disinfection treatments on vegetable wash water, with a maximum microbial reduction of 6.6 log CFU mL(-1) after 60 min treatment with O(3)-UV. However, maximum total microbial reductions achieved by UV and O(3) treatments after 60 min were 4.0 and 5.9 log CFU mL(-1), lower than by O(3)-UV treatment. Furthermore, turbidity of wash water was reduced significantly by O(3) and O(3)-UV treatments, while UV treatment did not affect the physicochemical quality of the water. Conclusions derived from this study illustrate that O(3) and O(3)-UV are alternatives to other sanitizers used in the fresh-cut washing processes. The use of these technologies would allow less frequent changing of spent water and the use of much lower sanitizer doses. Nevertheless, in specific applications such as carrot wash water, where levels of undesirable microbial and chemical constituents are lower than other vegetable wash water, UV treatment could be an appropriate treatment considering cost-effectiveness criteria.

Vegetative propagation by root and stem cuttings of Leptadenia ...

African Journals Online (AJOL)

The aim of this study was to investigate the possibilities of the propagation of Leptadenia hastata cuttings during the 3 seasons of the year in Sahel. The cuttings of 20 cm of length, collected from the basal, apical and root parts of the plants, were used. Study investigations consisted in observing the buds and leaves ...

Phytoextraction of initial cutting of Salix matsudana for Cd and Cu.

Science.gov (United States)

Wang, Wen-Wen; Cheng, Liu Ke; Hao, Jie Wei; Guan, Xin; Tian, Xing-Jun

2016-06-27

Salix species are widely used as vegetation filters because of their flourishing root system and fast growth rate. However, studies have yet to determine whether the root system functions in vegetable filters with mixed heavy metal (HM) pollution or whether initial cutting participates in the phytoextraction of HMs. This study aims to determine the function of the root system and initial cutting as vegetation filters in the absorption and accumulation of Cd and Cu. Thick (>1 cm in diameter) and fine (phytoextraction capacity of plants. The initial cuttings could also absorb and accumulate HMs in the early growth stages of willow without roots. Cu inhibited the plant absorption and accumulation of Cd and promoted Cd transport to shoots. Cd inhibited the Cu absorption of the root system. Our study provided essential data regarding woody species as vegetation filters of HM pollution.

Kinetic study of phytotoxicity induced by foliar lead uptake for vegetables exposed to fine particles and implications for sustainable urban agriculture.

Science.gov (United States)

Xiong, TianTian; Austruy, Annabelle; Pierart, Antoine; Shahid, Muhammad; Schreck, Eva; Mombo, Stéphane; Dumat, Camille

2016-08-01

At the global scale, foliar metal transfer occurs for consumed vegetables cultivated in numerous urban or industrial areas with a polluted atmosphere. However, the kinetics of metal uptake, translocation and involved phytotoxicity was never jointly studied with vegetables exposed to micronic and sub-micronic particles (PM). Different leafy vegetables (lettuces and cabbages) cultivated in RHIZOtest® devices were, therefore, exposed in a greenhouse for 5, 10 and 15days to various PbO PM doses. The kinetics of transfer and phytotoxicity was assessed in relation to lead concentration and exposure duration. A significant Pb accumulation in leaves (up to 7392mg/kg dry weight (DW) in lettuce) with translocation to roots was observed. Lead foliar exposure resulted in significant phytotoxicity, lipid composition change, a decrease of plant shoot growth (up to 68.2% in lettuce) and net photosynthesis (up to 58% in lettuce). The phytotoxicity results indicated plant adaptation to Pb and a higher sensitivity of lettuce in comparison with cabbage. Air quality needs, therefore, to be considered for the health and quality of vegetables grown in polluted areas, such as certain megacities (in China, Pakistan, Europe, etc.) and furthermore, to assess the health risks associated with their consumption. Copyright © 2016. Published by Elsevier B.V.

Consequências do polimorfismo das ceras cuticulares para a função de barreira da cutícula vegetal: estudos em sistemas modelo

OpenAIRE

Carreto, Laura Cristina da Silva

2003-01-01

Tese de doutoramento, Química, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2003 Muito embora a especiação das plantas vasculares se tenha traduzido na evolução de uma larga variedade de cutículas, algumas das características que determinam a função desta membrana, encontrada a revestir as partes não lenhificadas das plantas, foram conservadas evolutivamente. Não se conhecem excepções à regra de que a cutícula vegetal é uma estrutura de dupla-face, composta por dois meios d...

Verification of Some Vegetable Oils as Cutting Fluid for Aluminium

African Journals Online (AJOL)

Akorede

kerosene (due to the gummy nature of aluminium metal). The parameters ... In the cutting of metals, work is done in the plastic deformation of the layer being cut at the primary shear ... Lathe machine – Model: Metalx WARSZAWA,. Serial No.

EFFECT OF FARM SIZE AND FREQUENCY OF CUTTING ON ...

African Journals Online (AJOL)

EFFECT OF FARM SIZE AND FREQUENCY OF CUTTING ON OUTPUT OF ... the use of Ordinary Least Square (OLS) estimation technique was used in analyzing ... frequency of cutting that would produce maximum output of the vegetable as ...

Soil-atmosphere interaction in unsaturated cut slopes

Directory of Open Access Journals (Sweden)

Tsiampousi Aikaterini

2016-01-01

Full Text Available Interaction between atmosphere and soil has only recently attracted significant interest. Soil-atmosphere interaction takes place under dynamic climatic conditions, which vary throughout the year and are expected to suffer considerable alterations due to climate change. However, Geotechnical Analysis has traditionally been limited to simplistic approaches, where winter and summer pore water pressure profiles are prescribed. Geotechnical Structures, such as cut slopes, are known to be prone to large irreversible displacements under the combined effect of water uptake by a complex vegetation root system and precipitation. If such processes take place in an unsaturated material the complexity of the problem renders the use of numerical analysis essential. In this paper soil-atmosphere interaction in cut slopes is studied using advanced, fully coupled partially saturated finite element analyses. The effect of rainfall and evapotranspiration is modelled through sophisticated boundary conditions, applying actual meteorological data on a monthly basis. Stages of low and high water demand vegetation are considered for a period of several years, before simulating the effect of vegetation removal. The analysis results are presented with regard to the serviceability and stability of the cut slope.

Determination of six parabens residues in fresh-cut vegetables using QuEChERS with multi-walled carbon nanotubes and high performance liquid chromatography-tandem mass spectrometry

Science.gov (United States)

In this study, an optimized QuEChERS sample preparation method was developed to analyze residues of six parabens: methyl-, ethyl-, n-propyl-, isopropyl-, n-butyl-, and isobutyl-paraben in five fresh-cut vegetables (potato, broccoli, carrot, celery and cabbage) with high performance liquid chromatogr...

Performance evaluation of NEEM oil and HONGE Oil as cutting fluid in drilling operation of mild steel

Science.gov (United States)

Jyothi, P. N.; Susmitha, M.; Sharan, P.

2017-04-01

Cutting fluids are used in machining industries for improving tool life, reducing work piece and thermal deformation, improving surface finish and flushing away chips from the cutting zone. Although the application of cutting fluids increases the tool life and Machining efficiency, but it has many major problems related to environmental impacts and health hazards along with recycling & disposal. These problems gave provision for the introduction of mineral, vegetable and animal oils. These oils play an important role in improving various machining properties, including corrosion protection, lubricity, antibacterial protection, even emulsibility and chemical stability. Compared to mineral oils, vegetable oils in general possess high viscosity index, high flash point, high lubricity and low evaporative losses. Vegetable oils can be edible or non-edible oils and Various researchers have proved that edible vegetable oils viz., palm oil, coconut oil, canola oil, soya bean oil can be effectively used as eco-friendly cutting fluid in machining operations. But in present situations harnessing edible oils for lubricants formation restricts the use due to increased demands of growing population worldwide and availability. In the present work, Non-edible vegetable oil like Neem and Honge are been used as cutting fluid for drilling of Mild steel and its effect on cutting temperature, hardness and surface roughness are been investigated. Results obtained are compared with SAE 20W40 (petroleum based cutting fluid)and dry cutting condition.

Comprimento da estaca e tipo de substrato na propagação vegetativa de atroveran Shoot cutting length and substrate types on vegetative propagation of atroveran

Directory of Open Access Journals (Sweden)

Larissa Corrêa do Bomfim Costa

2007-08-01

Full Text Available A propagação vegetativa de espécies medicinais vem despertando interesse das pesquisas agronômicas, uma vez que se constitui no ponto de partida e em ferramenta básica para qualquer cultivo em escala comercial. Este trabalho objetivou determinar o comprimento de estaca e o tipo de substrato mais adequados para a propagação vegetativa de atroveran. Em condições de casa de vegetação sob nebulização intermitente, foram testados dois comprimentos de estacas (10 e 20cm e três substratos (areia lavada, casca de arroz carbonizada e substrato comercial Plantmax®, em delineamento experimental em blocos casualizados, com quatro repetições e cinco estacas por parcela. Aos trinta e cinco dias, foram avaliados a porcentagem de enraizamento, o comprimento da maior raiz (cm e a biomassa seca das folhas e das raízes (mg. Os resultados indicaram que a propagação vegetativa de atroveran por meio de estaquia é viável, uma vez que o seu enraizamento médio ficou acima de 70%. As mudas de atroveran obtidas de estacas com 20cm apresentaram maior biomassa seca das folhas e das raízes, apesar de o comprimento da estaca não ter afetado a porcentagem de enraizamento e o comprimento da raiz. Os tipos de substrato não proporcionaram efeito sobre o desenvolvimento das estacas de atroveran. Recomenda-se a produção de mudas de atroveran com estacas de 20cm de comprimento, utilizando-se qualquer um dos três substratos testados.The vegetative propagation of medicinal species is in increasing agronomic interest because it is the starting point and a basic tool for any cultivation in commercial scale. The objective of this work was to determine the best shoot cutting length and the best substrate for vegetative propagation of Ocimum selloi. Cuttings were placed in greenhouse conditions under intermittent mist. Two cutting sizes (10 and 20cm and three substrate types (washed sand, carbonized rice hulls and commercial substrate Plantmax® were tested

Hydraulic Aspects of Vegetation Maintanence in Streams

DEFF Research Database (Denmark)

Larsen, Torben; Vestergaard, Kristian

1991-01-01

This paper describes the importance of the underwater vegetation on Danish streams and some of the consequences of vegetation maintenance. the influence of the weed on the hydraulic conditions is studied through experiments in a smaller stream and the effect of cutting channels through the weed...... is measured. A method for predicting the Manning's n as a function of the discharge conditions is suggested, and also a working hypothesis for predictions of the effect of channel cutting is presented....

High relative humidity in-package of fresh-cut fruits and vegetables: advantage or disadvantage considering microbiological problems and antimicrobial delivering systems?

Science.gov (United States)

Ayala-Zavala, J F; Del-Toro-Sánchez, L; Alvarez-Parrilla, E; González-Aguilar, G A

2008-05-01

This hypothesis article states that the high relative humidity (RH) of packaged fresh-cut fruits or vegetables that is associated with spoilage can be used as an advantageous way to deliver antimicrobial compounds using cyclodextrins (CDs) as carriers. CDs can function as antimicrobial delivery systems as they can release antioxidant and antimicrobial compounds (guest molecules) as the humidity levels increase in the headspace. Hydrophobic antimicrobial guests can be complexed with CDs due to the amphiphatic nature of the host. Then, at high RH values, due to the water-CDs interaction, host-guest interactions are weakened; consequently, the antimicrobial molecule is released and should protect the product against the microbial growth. Potential antimicrobial compounds capable of forming complexes with CDs are discussed, as well as possible applications to preserve fresh-cut produce and future research in this area.

On-line fresh-cut lettuce quality measurement system using hyperspectral imaging

Science.gov (United States)

Lettuce, which is a main type of fresh-cut vegetable, has been used in various fresh-cut products. In this study, an online quality measurement system for detecting foreign substances on the fresh-cut lettuce was developed using hyperspectral reflectance imaging. The online detection system with a s...

Coatings for minimally processed fruits and vegetables

Science.gov (United States)

Fresh-cut fruit and vegetables are gaining increasing popularity and market share. Techniques to enhance stability of fresh cut produce are reviewed. Among these techniques, edibles coatings can provide protection against dehydration, microbial decay and decrease events related to physiological sene...

Short-term responses of decomposers and vegetation to stump removal

Energy Technology Data Exchange (ETDEWEB)

Kataja-aho, S.

2011-07-01

Stump removal has become a common practice to produce raw material for bioenergy production. It was hypothesized that stump removal is an extensive and more intense disturbance for forest ecosystems (soil decomposer organisms and vegetation) compared to traditional site preparation after clear cutting. Therefore, the effects of stump harvesting on forest soil decomposers, vegetation and nutrient dynamics in undisturbed patches of the forest soil and in exposed mineral soil were compared to the effects of the traditional site preparation method, mounding. Nematodes and enchytraeids were the only decomposer groups that were directly affected (negatively) by the stump removal. Regardless of the treatment, the abundances of most of the decomposer groups were consistently lower in the exposed mineral soil than in the intact forest soil. There was 2-3 times more exposed mineral soil in stump removal sites compared to mounding sites. When this was taken into account, the decomposer community was negatively affected by the stump removal at the forest stand level. However, the greater soil disturbance at the stump harvesting sites enhanced CO{sub 2} production, net nitrogen mineralisation and nitrification. The increased N availability and the changes in microclimate due to the disturbance probably explained the vegetation increase at the stump harvested sites. Planted Norway spruce seedlings grew faster during the first two growing periods at the stump removal sites than at the mounding sites. The seedlings had high and similar ectomycorrhizal colonization rate in both treatments. In the short-term, it is probably not the resources removed in the stumps themselves, but the degree and amount of soil disturbance during the stump harvesting procedure that affects the decomposer community and its function in the clear-felled stands. (orig.)

Testing of Vegetable-Based dutting Fluid by Hole Making Operation

DEFF Research Database (Denmark)

Belluco, Walter; De Chiffre, Leonardo

2000-01-01

in connection with the development of vegetable based cutting oils. Results show that drilling and tapping qualify as operations in which cutting forces can be resolved within one test when they differ by less than 1 percent by taking 6 repetitions, and measurements could be repeated with relative standard...... development and testing of vegetable based oils of equal or better performance than a reference commercial mineral oil....

Microbiological Spoilage of Fruits and Vegetables

Science.gov (United States)

Barth, Margaret; Hankinson, Thomas R.; Zhuang, Hong; Breidt, Frederick

Consumption of fruit and vegetable products has dramatically increased in the United States by more than 30% during the past few decades. It is also estimated that about 20% of all fruits and vegetables produced is lost each year due to spoilage. The focus of this chapter is to provide a general background on microbiological spoilage of fruit and vegetable products that are organized in three categories: fresh whole fruits and vegetables, fresh-cut fruits and vegetables, and fermented or acidified vegetable products. This chapter will address characteristics of spoilage microorganisms associated with each of these fruit and vegetable categories including spoilage mechanisms, spoilage defects, prevention and control of spoilage, and methods for detecting spoilage microorganisms.

Monitoring leafy vegetables through packaging films with

OpenAIRE

Diezma Iglesias, Belen; Lara, M.A.; Molina, Marta; Lleó García, Lourdes; Ruiz-Altisent, Margarita; Artés Hernández, Francisco; Roger, Jean-Michel

2012-01-01

Fresh-cut or minimally processed fruit and vegetables have been physically modified from its original form (by peeling, trimming, washing and cutting) to obtain a 100% edible product that is subsequently packaged (usually under modified atmosphere packaging –MAP) and kept in refrigerated storage. In fresh-cut products, physiological activity and microbiological spoilage, determine their deterioration and shelf-life. The major preservation techniques applied to delay spoilage are chilling s...

Performance evaluation of vegetable-based oils in drilling austenitic stainless steel

DEFF Research Database (Denmark)

Belluco, Walter; De Chiffre, Leonardo

2004-01-01

breaking were recorded for each bore, and tool wear was measured at constant intervals. A commercial mineral-based oil was taken as reference product, and five vegetable-based cutting fluids at different levels of additivation were tested. All measured parameters were in agreement, confirming......The efficiency of six cutting oils was evaluated in drilling AISI 316L austenitic stainless steel using conventional HSS-Co tools by measurements of tool life, tool wear, cutting forces and chip formation. Seven tools were tested with each fluid to catastrophic failure. Cutting forces and chip...... to tool life testing. All vegetable-based fluids performed better than the reference product. The best performance was obtained with a cutting fluid yielding 177% increases in tool life and 7% reduction in thrust force. (C) 2003 Elsevier B.V. All rights reserved....

Effect of ionizing radiation and indole butyric acid on rooting of olive cuttings

International Nuclear Information System (INIS)

Al-Bachir, Mahfouz

1993-12-01

This study was performed to investigate the effects of indole butyric acid (IBA) (2000 and 4000 ppm), low doses of gamma irradiation (2,4, and 6 Gy), combined treatment of IBA followed by irradiation, and irradiation followed by IBA on olive cuttings (Variety Khodairi). Rooting percentage, callus formation, vegetative growth root number, and the length of the roots were measured after 100 days of planting. The results indicated that IBA treatments in both concentrations increased the callus formation, rooting, vegetative growth, and the number and length of the roots. Low doses of gamma irradiation had no effects on rooting percentage in comparison with the hormonal treatments. Callus formation, rooting, vegetative growth, and length of the root of cuttings produced in 1990 were better than those produced in 1991, and cuttings produced in January were better than those produced in March and October. (author). 16 refs., 15 tabs

Vegetative Regeneration Capacities of Five Ornamental Plant Invaders After Shredding

Science.gov (United States)

Monty, Arnaud; Eugène, Marie; Mahy, Grégory

2015-02-01

Vegetation management often involves shredding to dispose of cut plant material or to destroy the vegetation itself. In the case of invasive plants, this can represent an environmental risk if the shredded material exhibits vegetative regeneration capacities. We tested the effect of shredding on aboveground and below-ground vegetative material of five ornamental widespread invaders in Western Europe that are likely to be managed by cutting and shredding techniques: Buddleja davidii (butterfly bush, Scrophulariaceae), Fallopia japonica (Japanese knotweed, Polygonaceae), Spiraea × billardii Hérincq (Billard's bridewort, Rosaceae), Solidago gigantea (giant goldenrod, Asteraceae), and Rhus typhina L. (staghorn sumac, Anacardiaceae). We looked at signs of vegetative regeneration and biomass production, and analyzed the data with respect to the season of plant cutting (spring vs summer), the type of plant material (aboveground vs below-ground), and the shredding treatment (shredded vs control). All species were capable of vegetative regeneration, especially the below-ground material. We found differences among species, but the regeneration potential was generally still present after shredding despite a reduction of growth rates. Although it should not be excluded in all cases (e.g., destruction of giant goldenrod and staghorn sumac aboveground material), the use of a shredder to destroy woody alien plant material cannot be considered as a general management option without significant environmental risk.

Evaluating vegetation management practices for woody and herbaceous vegetation : phase III : final report.

Science.gov (United States)

2017-08-01

To train ODOT staff to recognize trees along the right-of-way that may be hazardous, identify trees that may be of a species-specific concern for vegetation management objectives, make pruning cuts based on industry standards, and oversee the tree wo...

EPICORMIC SHOOTS INDUCTION AND ROOTING CUTTINGS OF Calophyllum brasiliense

Directory of Open Access Journals (Sweden)

Dagma Kratz

2016-12-01

Full Text Available Calophyllum brasiliense is present in a wide natural distribution range in Brazil and its monopodial growth, with a rectilinear stem and a moderately dense timber has attracted the attention from the logging industry in recent decades. In the meantime, the lack of efficient rescue and vegetative propagation methods of adult plants has been a narrowing condition for the selection of superior genotypes in breeding programs of the species. Therefore, we evaluate epicormic shoots induction methods and the rooting cuttings of 14 year-old Calophyllum brasiliense trees. From this scope, three methods of epicormic shoots induction were evaluated: coppicing, girdling and partial girdling. We evaluate the number of produced sprouts and the percentage of sprouted trees at 06, 12 and 15 months’ after the experiment installation. Results have indicated the feasibility of Calophyllum brasiliense vegetative rescue by cuttings method using epicormic shoots induced by coppicing and girdling. In contrast, partial girdling was not effective in epicormic shoots emission. Concerning adventitious roots, the sprouting technique had no influence in the rooting of cuttings, showing variation among the different stock plants.

The impacts of ditch cuttings on weed pressure and crop yield in maize

NARCIS (Netherlands)

Huijser, M.P.; Meerburg, B.G.; Holshof, G.

2004-01-01

The Flevoland Polder in The Netherlands is characterised by large agricultural fields separated by ditches. The vegetation in the ditches is typically cut twice a year to ensure sufficient drainage. Removal of the cuttings, primarily reed (Phragmites australis), results in a substantial increase in

Cold storage of rooted and non-rooted carnation cuttings

African Journals Online (AJOL)

USER

2010-06-14

Jun 14, 2010 ... allows cutting producers to regulate the market supply during surplus production or .... Techniques of carnation growing. Publications of TAV. 17. ... The commercial storage of fruits, vegetables and florist and nursary stocks.

Propagação vegetativa de abacateiro por estaquia Vegetative propagation of avocado, by stem cuttings

Directory of Open Access Journals (Sweden)

Samar Velho da Silveira

2004-04-01

Full Text Available Visando a propagar vegetativamente o abacateiro (Persea sp. por meio de estacas, estiolaram-se ramos em mudas das cultivares Ouro Verde e Baronesa. Após a obtenção destas mudas por garfagem de fenda cheia, podou-se a parte aérea das mesmas 10 cm acima do ponto de enxertia. Metade das mudas foi colocada em câmara escura, coberta com polietileno preto, visando a forçar brotação estiolada, enquanto a outra metade foi posta a brotar em casa de vegetação, anelando-se a base de todos os ramos estiolados e não estiolados. Um mês após a poda das mudas, confeccionaram-se estacas, tanto de ramos estiolados quanto de não estiolados, com 20cm de comprimento e quatro folhas maduras, que foram tratadas com solução de 2000 mg L-1 de ácido indolbutírico (AIB, durante 10 segundos e colocadas, individualmente, em vasos plásticos pretos de 500 ml, contendo casca de arroz carbonizada como substrato. Após dois meses, estas foram repicadas para sacos de polietileno com capacidade para cinco litros. No momento do transplante, a taxa de enraizamento das estacas estioladas e não estioladas foi de 62,5% e 12,5%, respectivamente, para a cultivar Ouro Verde. A cultivar Baronesa não enraizou em nenhum caso. Após o transplante, as percentagens de enraizamento mantiveram-se as mesmas para a cultivar Ouro Verde, aumentando, contudo, o número de raízes por estaca. Já, para a cultivar Baronesa, as estacas não estioladas passaram a apresentar 12,5% de enraizamento, enquanto as estioladas continuaram com 0%.With the objetive to propagate avocados vegetatively by means of stem cuttings, branches of cultivars Ouro Verde and Baronesa were forced to etiolate. Grafted avocado plants were prunned 10 cm above of the grafting point. Half of those plants were covered with black polyethylene and placed in a darkroom. The other half of those plants were transfered to a greenhouse. The branches formed were girdled at the base. One month after the plants had been

Germination of vegetable seeds exposed to very high pressure

International Nuclear Information System (INIS)

Mori, Y; Yokota, S; Ono, F

2012-01-01

Effects of high hydrostatic pressure were investigated on vegetable seeds in the GPa range to examine the potentialities of breed improvement by high-pressure processing. Specimens of several seeds of broccoli (Brassica oleracea var. italica), Turnip leaf (Brassica rapa var. perviridis) and Potherb Mustard (Brassica rapa var. nipposinica) were put in a teflon capsule with liquid high pressure medium, fluorinate, and inserted into a pyrophillite cube. By using a cubic anvil press a hydrostatic pressure of 5.5 GP a was applied to these seeds for 15 minutes. After being brought back to ambient pressure, they were seeded on humid soil in a plant pot. Many of these vegetable seeds began to germinate within 6 days after seeded.

Germination of vegetable seeds exposed to very high pressure

Science.gov (United States)

Mori, Y.; Yokota, S.; Ono, F.

2012-07-01

Effects of high hydrostatic pressure were investigated on vegetable seeds in the GPa range to examine the potentialities of breed improvement by high-pressure processing. Specimens of several seeds of broccoli (Brassica oleracea var. italica), Turnip leaf (Brassica rapa var. perviridis) and Potherb Mustard (Brassica rapa var. nipposinica) were put in a teflon capsule with liquid high pressure medium, fluorinate, and inserted into a pyrophillite cube. By using a cubic anvil press a hydrostatic pressure of 5.5 GP a was applied to these seeds for 15 minutes. After being brought back to ambient pressure, they were seeded on humid soil in a plant pot. Many of these vegetable seeds began to germinate within 6 days after seeded.

Investigations of Cutting Fluid Performance Using Different Machining Operations

DEFF Research Database (Denmark)

De Chiffre, Leonardo; Belluco, Walter

2002-01-01

An analysis of cutting fluid performance in dif-ferent metal cutting operations is presented based on performance criteria, work material and fluid type. Cutting fluid performance was evaluated in turning, drilling, reaming and tapping operations, with respect to tool life, cutting forces and prod...... will get the same performance ranking for different metalworking fluids no matter what machining test is used, when the fluids are of the same type. Results show that this is mostly true for the water-based fluids on austenitic stainless steel while ranking did change depending on the test with straight......-gated. In the case of austenitic stainless steel as the workpiece material, results using the different operations under different cutting conditions show that the performance of vegetable oil based prod-ucts is superior or equal to that of mineral oil based products. The hypothesis was investigated that one...

Modelling quality of fresh-cut tomato based on stage of maturity and storage conditions

NARCIS (Netherlands)

Moreira Lana, M.

2005-01-01

Fresh-cut or minimally processed vegetables are those which have been trimmed and/or peeled and/or cut into 100% usable product and still maintain freshness. Contrary to other processing methods (freezing, canning and drying for example) the minimal processing operations reduce the shelf life in

Toxoplasma gondii infection in workers occupationally exposed to unwashed raw fruits and vegetables: a case control seroprevalence study

Directory of Open Access Journals (Sweden)

Alvarado-Esquivel Cosme

2011-12-01

Full Text Available Abstract Background Through a case control seroprevalence study, we sought to determine the association of Toxoplasma gondii infection with occupational exposure to unwashed raw fruits and vegetables. Methods Subjects, numbering 200, who worked growing or selling fruits and vegetables, and 400 control subjects matched by age, gender, and residence were examined by enzyme immunoassays for the presence of anti-Toxoplasma IgG and IgM antibodies. Socio-demographic, clinical, and behavioral characteristics from the study subjects were obtained. Results Of the 200 fruit and vegetable workers, 15 (7.5% of whom, and 31 (7.8% of the 400 controls were positive for anti-Toxoplasma IgG antibodies (P = 0.96. Anti-Toxoplasma IgM antibodies were found in 2 (1% of the fruit workers and in 11 (2.8% of the control subjects (P = 0.23. Seroprevalence of Toxoplasma antibodies increased with age (P = 0.0004. In addition, seropositivity to Toxoplasma was associated with ill status (P = 0.04, chronic tonsillitis (P = 0.03, and reflex impairment (P = 0.03. Multivariate analysis showed that Toxoplasma infection was associated with consumption of raw meat (OR = 5.77; 95% CI: 1.15-28.79; P = 0.03, unwashed raw fruits (OR = 2.50; 95% CI: 1.11-5.63; P = 0.02, and living in a house with soil floors (OR = 3.10; 95% CI: 1.22-7.88; P = 0.01, whereas Toxoplasma infection was negatively associated with traveling abroad (OR = 0.28; 95% CI: 0.12-0.67; P = 0.005. Conclusions This is the first report of seroprevalence and contributing factors for Toxoplasma infection in workers occupationally exposed to unwashed raw fruits and vegetables, and the results may help in the design of optimal preventive measures against Toxoplasma infection especially in female workers at reproductive age.

Argan tree (Argania spinosa L. skeels vegetative propagation by cutting and grafting

Directory of Open Access Journals (Sweden)

M.L. Metougui

2018-01-01

Full Text Available The argan tree (Argania spinosa L. skeels is an endemic species of Morocco that plays an important socioeconomic role through the value of its oil. Despite the importance of the species, the main propagation method is still by seeds, which presents several disadvantages, including a long juvenile phase and high genetic variability between plants. The aim of this work is to study from one side the genotype and source of calcium (CaCl2 and Ca(NO32 effects on the cutting yield, and from the other side the effect of the rootstock and the graft genotype on the grafting method’s success and finally compare between the both methods for argan massive propagation. The results exhibited an important genotype effect on the cutting; in fact, each of the four propagated genotypes reacted differently to this propagation method. The calcium treatment did not improve the cutting rooting, whereas its disinfectant effect depended on the genotype. From the other side, the grafting success depended mainly on the graft/rootstock compatibility, but little on the graft genotype and not at all on the rootstock genotype. The comparison between the two propagation methods showed that grafting is more suitable for argan tree propagation. The highest success rate reached through the cutting was 66.7 % with the best genotype, whereas by grafting the best rate was off 95.8% attended by two of twelve graft/rootstock combinations tested.

Management intensity and vegetation complexity affect web-building spiders and their prey.

Science.gov (United States)

Diehl, Eva; Mader, Viktoria L; Wolters, Volkmar; Birkhofer, Klaus

2013-10-01

Agricultural management and vegetation complexity affect arthropod diversity and may alter trophic interactions between predators and their prey. Web-building spiders are abundant generalist predators and important natural enemies of pests. We analyzed how management intensity (tillage, cutting of the vegetation, grazing by cattle, and synthetic and organic inputs) and vegetation complexity (plant species richness, vegetation height, coverage, and density) affect rarefied richness and composition of web-building spiders and their prey with respect to prey availability and aphid predation in 12 habitats, ranging from an uncut fallow to a conventionally managed maize field. Spiders and prey from webs were collected manually and the potential prey were quantified using sticky traps. The species richness of web-building spiders and the order richness of prey increased with plant diversity and vegetation coverage. Prey order richness was lower at tilled compared to no-till sites. Hemipterans (primarily aphids) were overrepresented, while dipterans, hymenopterans, and thysanopterans were underrepresented in webs compared to sticky traps. The per spider capture efficiency for aphids was higher at tilled than at no-till sites and decreased with vegetation complexity. After accounting for local densities, 1.8 times more aphids were captured at uncut compared to cut sites. Our results emphasize the functional role of web-building spiders in aphid predation, but suggest negative effects of cutting or harvesting. We conclude that reduced management intensity and increased vegetation complexity help to conserve local invertebrate diversity, and that web-building spiders at sites under low management intensity (e.g., semi-natural habitats) contribute to aphid suppression at the landscape scale.

Slicing Cuts on Food Materials Using Robotic-Controlled Razor Blade

Directory of Open Access Journals (Sweden)

Debao Zhou

2011-01-01

Full Text Available Cutting operations using blades can arise in a number of industries, for example, food processing industry, in which cheese, fruit and vegetable, even meat, are involved. Certain questions will rise during these works, such as “why pressing-and-slicing cuts use less force than pressing-only cuts” and “how is the influence of the blade cutting-edge on force”. To answer these questions, this research developed a mathematical expression of the cutting stress tensor. Based on the analysis of the stress tensor on the contact surface, the influence of the blade edge-shape and slicing angle on the resultant cutting force were formulated and discussed. These formulations were further verified using experimental results by robotic cutting of potatoes. Through studying the change of the cutting force, the optimal slicing angle can be obtained in terms of maximum feeding distance and minimum cutting force. Based on the blade sharpness properties and the specific materials, the required cutting force can be predicted. These formulation and experimental results explained the basic theory of blade cutting fracture and further provided the support to optimize the cutting mechanism design and to develop the force control algorithms for the automation of blade cutting operations.

Restoration of wet dune slacks on the Dutch Wadden Sea islands : Recolonization after large-scale sod cutting

NARCIS (Netherlands)

Grootjans, AP; Everts, H; Bruin, K; Fresco, L; Grootjans, Ab P.

The effects of sod cutting were studied in a dune area on the Dutch Wadden Sea Island of Texel. Sod cutting was carried out in a range of different dune slacks in order to restore dune slack vegetation with many endangered Red List species. Sod cutting removed approximately 96% of the soil seed

Restoration of Wet Dune Slacks on the Dutch Wadden Sea Islands: Recolonization After Large-Scale Sod Cutting

NARCIS (Netherlands)

Grootjans, A.P.; Everts, H.; Bruin, K.; Fresco, L.

2011-01-01

The effects of sod cutting were studied in a dune area on the Dutch Wadden Sea Island of Texel. Sod cutting was carried out in a range of different dune slacks in order to restore dune slack vegetation with many endangered Red List species. Sod cutting removed approximately 96% of the soil seed

Performances of cutting fluids in turning. Mineral oil - RM

DEFF Research Database (Denmark)

Axinte, Dragos Aurelian; Belluco, Walter

1999-01-01

Scope of the present measurement campaign is the evaluation of the cutting fluid performance. The report presents the standard routine and the results obtained when turning stainless steel and brass with a commercial vegetable based oil called RM. The methods were developed to be applicable...

Rooting Ability of Melia volkensii Cuttings Under Different Auxin Concentration Levels and Provenances

International Nuclear Information System (INIS)

Oeba, V.O; Muok, B.; Odee, D

2007-01-01

Melia volkensii is one of the most popular fast growing agro-forestry tree species in East Africa's arid and semi arid lands. It is valued for for production of termite resistant timber. Kenya Forestry Research Institute is carrying out studies on management, improvement and domestication of species with a major focus on improving low germination mortality and other propagation methods. Vegetative propagation was investigated in order to supplement more seedlings for increased demand of the species. The objective of this study was to determine and predict the effect of varying levels of auxin concentrations on rooting of melia volkensii shoot cuttings under different provenances. The experiment was set in a split plot design and conducted in a non-mist propagator. The number of roots was recorded for every cutting in the experiment. Mean cumulative cutting percentage were analysed using ANOVA procedures by first checking homogeneity of variance; Pearson correlation were carried out to check the interrelation of the factors with rooting and Logistic ability of the cuttings. The results showed that cuttings inoculated with 0.3 mgl-1 s ignificantly (p n ot showing any rooting from three provenances. In conclusion 0.03 mgl-1 s hould be used for further vegetative propagation of M. vokensii. Cutting from Taveta inoculated with 0.3 mgl-1 w ould significantly increase the number of seedlings for planting

Cutting tool for removing materials from well bore

International Nuclear Information System (INIS)

Lynde, G.D.; Harvey, H.H. Jr.

1991-01-01

This patent describes a cutting tool adapted to be positioned downhole in a well bore for removing a metal member from the well bore; a tool body adapted to be received within said well bore and to be supported at its upper end for rotation about a longitudinal axis; blades at spaced intervals on the body and extending outwardly therefrom, each of the blades having a base with a leading surface relative to the direction of rotation; closely spaced cutting elements of hard cutting material secured to said leading surface of the base in a plurality of transversely extending rows, each cutting element being of a predetermined size and shape and arranged in a predetermined generally symmetrical pattern on the base relative to the other elements, each of said cutting elements having an exposed from cutting face forming a cutting surface, a rear face secured to the leading surface of said base, a peripheral surface extending between said faces, and a relatively sharp edge formed at the juncture of the front face and peripheral surface; the front cutting face of each cutting element being arranged and constructed for directing an extending end portion of a turning cut form said member to effect a breaking of said turning from the member being cut in a predetermined manner to minimize interesting of the turning

Application of chlorophyll fluorescence imaging and hyperspectral imaging in evaluation of decay in fresh-cut lettuce

Science.gov (United States)

Lettuce (Lactuca sativa L.) is commercially the most popular leafy vegetable whose leaves are usually consumed raw. Cleaned, cored, and chopped (fresh-cut) lettuce is a desirable, but highly perishable product. Modified atmosphere packaging (MAP) has been introduced to maintain quality of fresh-cut ...

Contamination by cadmium and lead of some fruits and vegetables exposed to polluted air

International Nuclear Information System (INIS)

Nohra, R.

2004-01-01

Author.Global air pollution and particularly in the urban cities derives from vehicle transportation (cars, buses, trucks) and electric generators. In Lebanon, many people use fuel diesel and leaded gasoline in the engines of their vehicles. Indeed, the fuel used in our country, contains thirteen times more pollutants than that used legally in the developed countries (Magazine de l'environnement, 2002). This contributes to the pollution of the air that we breathe as well as the fruits and vegetables exposed to air. 762 samples of four kinds of different fruits (peaches, apples, strawberries and grapes) and two kinds of vegetables (parsleys and cucumbers) were taken twice and during different periods from eight different places in laps of time of seven days. The samples were analyzed in the laboratories of IRAL at Fanar and Tal-Amara, using the Spectroscopy Atomic Absorption method. The analysis included two groups of samples: the first one comprises 192 samples of fruits and vegetables without peeling and the second one comprises 570 samples of fruit and vegetables with peeling. The average values of the non washed samples were between 0.13 ±0.012 and 0.6 ppm ± 0.02 for lead and 0.06 ± 0.015 and 0.18 ppm ± 0.02 for cadmium. Those of the non washed peelings were between 0.08 ± 0.015 and 0.38 ppm ±0.025 for lead and 0.03 ±0.006 and 0.11 ppm ± for cadmium. On the other hand, those of the non-washed peeled samples were between 0.05 ± 0.01 and 0.27 ppm ± 0.016 for lead and 0.03 ± 0.016 and lead and 0.03 ± 0.06 and 0.07 ppm ± 0.015 for cadmium. Once these samples were washed , the average values were marked between 0.03 ± 0.006 and 0.15 ppm ± 0.02 for the lead and 0.02 ± 0.006 and 0.06 ppm ± 0.015 for the cadmium. Then, after drying them, concentrations revealed to be comprised between 0.02 ± 0.005 and 0.1 ppm ± 0.02 for the lead and 0.01 and 0.04 ppm ± 0.006 for the cadmium and that of the washing water was concentrated between 0.09 ± 0.016 and 0

An ergonomic approach for designing indian traditional vegetable cutter.

Science.gov (United States)

Dhara, Prakash C; De, Sujaya; Sengupta, Piyali; Maity, Payel; Pal, Amitava

2015-01-01

In India varieties of hand tools have been used to cut the vegetables. Traditional vegetable cutter is a commonly used hand tool which has been used for years in the kitchen. The tool may have some design related problems. The present study was undertaken to reduce those problems. The study objective was to evaluate a new design of traditional vegetable cutters for use in the Indian kitchen. One hundred and fifty Indian women who regularly used a vegetable cutter for cooking purposes participated in this study. The design of the vegetable cutter was modified based on the postural preference of the users and other anthropometric factors including the blade angle, length, breadth and width of the sitting area. The prevalence of musculoskeletal disorders was assessed by means of a questionnaire for subjects' feedback. New concepts of the design were proposed and a few prototypes were made and were tested by paired comparison using the EMG system. A large number of subjects (61%) used the vegetable cutter while sitting on the floor with folded knees and the prevalence of MSD in most of the body parts was comparatively lower in this posture than that in squatting posture. In the new design, a broad platform was suggested to provide a more comfortable sitting when a subject sits on it with folded knees. For the vegetable cutter, the blade angle was made at 120° with a broad folded wooden base as the final prototype of the cutter. The length, breadth, and thickness of the base were selected based on the results of the anthropometric measurements among the prototypes of the cutters. The selected vegetable cutter showed the least myoelectric activity among the prototypes during cutting vegetables. The modified vegetable cutter appeared to be ergonomically effective, less prone to muscular stress, and compatible for preferred posture of the users.

Modelling quality of fresh-cut tomato based on stage of maturity and storage conditions

OpenAIRE

Moreira Lana, M.

2005-01-01

Fresh-cut or minimally processed vegetables are those which have been trimmed and/or peeled and/or cut into 100% usable product and still maintain freshness. Contrary to other processing methods (freezing, canning and drying for example) the minimal processing operations reduce the shelf life in relation to the raw material (intact product).In this thesis the changes in quality of tomato fruits after cutting into transversal slices were analysed and quantified in relation to the stage of matu...

Survival, growth, and body residues of hyalella azteca (Saussure) exposed to fipronil contaminated sediments from non-vegetated and vegetated microcosms.

Science.gov (United States)

Kröger, Robert; Lizotte, Richard E; Moore, Matthew T

2009-09-01

We assessed chronic effects of fipronil and metabolite contaminated sediments from non-vegetated and Thallia dealbata vegetated wetland microcosms on Hyalella azteca during wet and dry exposures. Mean sediment concentrations (ng g(-1)) ranged from 0.72-1.26, 0.01-0.69, 0.07-0.23, and 0.49-7.87 for fipronil, fipronil-sulfide, fipronil-sulfone, and fipronil-desulfinyl, respectively. No significant differences in animal survival or growth were observed between non-vegetated and vegetated microcosms during wet or dry exposures. Mean animal body residue concentrations (ng g(-1)) ranged from 28.4-77.6, 0-30.7, and 8.3-43.8 for fipronil, fipronil-sulfide, and fipronil-sulfone. Fipronil-desulfinyl was not detected in any animal samples.

Modeling transfer of Escherichia coli O157:H7 and Listeria monocytogenes during preparation of fresh-cut salads: impact of cutting and shredding practices.

Science.gov (United States)

Zilelidou, Evangelia A; Tsourou, Virginia; Poimenidou, Sofia; Loukou, Anneza; Skandamis, Panagiotis N

2015-02-01

Cutting and shredding of leafy vegetables increases the risk of cross contamination in household settings. The distribution of Escherichia coli O157:H7 and Listeria monocytogenes transfer rates (Tr) between cutting knives and lettuce leaves was investigated and a semi-mechanistic model describing the bacterial transfer during consecutive cuts of leafy vegetables was developed. For both pathogens the distribution of log10Trs from lettuce to knife was towards low values. Conversely log10Trs from knife to lettuce ranged from -2.1 to -0.1 for E. coli O157:H7 and -2.0 to 0 for L. monocytogenes, and indicated a more variable phenomenon. Regarding consecutive cuts, a rapid initial transfer was followed by an asymptotic tail at low populations moving to lettuce or residing on knife. E. coli O157:H7 was transferred at slower rates than L. monocytogenes. These trends were sufficiently described by the transfer-model, with RMSE values of 0.426-0.613 and 0.531-0.908 for L. monocytogenes and E. coli O157:H7, respectively. The model showed good performance in validation trials but underestimated bacterial transfer during extrapolation experiments. The results of the study can provide information regarding cross contamination events in a common household. The constructed model could be a useful tool for the risk-assessment during preparation of leafy-green salads. Copyright © 2014 Elsevier Ltd. All rights reserved.

Adventitious rooting declines with the vegetative to reproductive switch and involves a changed auxin homeostasis.

Science.gov (United States)

Rasmussen, Amanda; Hosseini, Seyed Abdollah; Hajirezaei, Mohammed-Reza; Druege, Uwe; Geelen, Danny

2015-03-01

Adventitious rooting, whereby roots form from non-root tissues, is critical to the forestry and horticultural industries that depend on propagating plants from cuttings. A major problem is that age of the tissue affects the ability of the cutting to form adventitious roots. Here, a model system has been developed using Pisum sativum to differentiate between different interpretations of ageing. It is shown that the decline in adventitious rooting is linked to the ontogenetic switch from vegetative to floral and is mainly attributed to the cutting base. Using rms mutants it is demonstrated that the decline is not a result of increased strigolactones inhibiting adventitious root formation. Monitoring endogenous levels of a range of other hormones including a range of cytokinins in the rooting zone revealed that a peak in jasmonic acid is delayed in cuttings from floral plants. Additionally, there is an early peak in indole-3-acetic acid levels 6h post excision in cuttings from vegetative plants, which is absent in cuttings from floral plants. These results were confirmed using DR5:GUS expression. Exogenous supplementation of young cuttings with either jasmonic acid or indole-3-acetic acid promoted adventitious rooting, but neither of these hormones was able to promote adventitious rooting in mature cuttings. DR5:GUS expression was observed to increase in juvenile cuttings with increasing auxin treatment but not in the mature cuttings. Therefore, it seems the vegetative to floral ontogenetic switch involves an alteration in the tissue's auxin homeostasis that significantly reduces the indole-3-acetic acid pool and ultimately results in a decline in adventitious root formation. © The Author 2014. Published by Oxford University Press on behalf of the Society for Experimental Biology.

Mixed noble gas effect on cut green peppers

Science.gov (United States)

Raymond, L. V.; Zhang, M.; Karangwa, E.; Chesereka, M. J.

2013-01-01

Increasing attempts at using gas which leads to hydrate formation as a preservative tool in fresh-cut fruits and vegetables have been reported. In this study, changes in some physical and biochemical properties of fresh-cut green peppers under compressed noble gas treatments were examined. Mixed argonkrypton and argon treatments were performed before cold storage at 5°C for 15 days. Mass loss and cell membrane permeability were found to be the lowest in mixed argon-krypton samples. Besides, a lower CO2 concentration and vitamin C loss were detected in gastreated samples compared to untreated samples (control). While the total phenol degradation was moderately reduced, the effect of the treatment on polyphenoloxidase activity was better at the beginning of the storage period. The minimum changes in quality observed in cut peppers resulted from both mixed and gas treatment alone.

Regeneration of Mature Norway Spruce Stands: Early Effects of Selective Cutting and Clear Cutting on Seepage Water Quality and Soil Fertility

Directory of Open Access Journals (Sweden)

Wendelin Weis

2001-01-01

Full Text Available The cutting of trees influences element turnover in the forest ecosystem. The reduction of plant uptake, as well as an increased mineralization and nitrification due to higher soil temperature and soil moisture, can lead to considerable losses of nutrients from the main rooting zone. This may result in a reduced soil fertility and a decrease in drinking water quality due to high nitrate concentrations in the seepage water. In Bavaria (Germany selective cutting is preferred to clear cutting when initiating the regeneration of Norway spruce stands with European beech. This paper summarizes the early effects of both forest management practices on soil fertility and seepage water quality for three different sites. Shown are the concentrations of nitrogen and base cations in the seepage water as well as the water and ion fluxes during the first year after tree cut. Nutrient inputs decreased on thinned plots and even more at clear-cuts. Nitrate concentrations in the seepage water are hardly affected by moderate thinning; however, on clear-cuts, the nitrate concentration increases significantly, and base cations are lost from the upper mineral soil. This effect is less obvious at sites where a dense ground vegetation, which is able to take up excess nitrogen, exists.

Pre-Harvest light intensity affects shelf-Life of fresh-cut lettuce

NARCIS (Netherlands)

Witkowska, I.M.; Woltering, E.J.

2010-01-01

The industry of fresh-cut produce is continuously growing due to increasing demand for fresh, healthy and convenient foods. However, processing of vegetables accelerates quality deterioration due to structural, physiological and biochemical changes. Therefore, the value of the produce to the

Vegetation in clear-cuts depends on previous land use: a century-old grassland legacy

Science.gov (United States)

Jonason, Dennis; Ibbe, Mathias; Milberg, Per; Tunér, Albert; Westerberg, Lars; Bergman, Karl-Olof

2014-01-01

Plant species richness in central and northern European seminatural grasslands is often more closely linked to past than present habitat configuration, which is indicative of an extinction debt. In this study, we investigate whether signs of historical grassland management can be found in clear-cuts after at least 80 years as coniferous production forest by comparing floras between clear-cuts with a history as meadow and as forest in the 1870s in Sweden. Study sites were selected using old land-use maps and data on present-day clear-cuts. Species traits reflecting high capacities for dispersal and persistence were used to explain any possible links between the plants and the historical land use. Clear-cuts that were formerly meadow had, on average, 36% higher species richness and 35% higher richness of grassland indicator species, as well as a larger overall seed mass and lower anemochory, compared to clear-cuts with history as forest. We suggest that the plants in former meadows never disappeared after afforestation but survived as remnant populations. Many contemporary forests in Sweden were managed as grasslands in the 1800s. As conservation of remaining grassland fragments will not be enough to reduce the existing extinction debts of the flora, these young forests offer opportunities for grassland restoration at large scales. Our study supports the concept of remnant populations and highlights the importance of considering historical land use for understanding the distribution of grassland plant species in fragmented landscapes, as well as for policy-making and conservation. PMID:25540690

Preceding bronchial cutting for exposure of the pulmonary artery buried in scar tissue after chemoradiotherapy.

Science.gov (United States)

Nomori, Hiroaki; Cong, Yue; Sugimura, Hiroshi

2017-01-01

It is often difficult to expose the pulmonary artery buried in a scar tissue, especially in lung cancer patients that responded well to neoadjuvant chemoradiotherapy. Difficulty to access pulmonary artery branches may lead to potentially unnecessary pneumonectomy. To complete lobectomy in such cases, a technique with preceding bronchial cutting for exposure of the pulmonary artery is presented. After dissecting the pulmonary vein, the lobar bronchus is cut from the opposite side of the pulmonary artery with scissors. The back wall of the lobar bronchus is cut using a surgical knife from the luminal face, which can expose the pulmonary artery behind the bronchial stump and then complete lobectomy. Fourteen patients have been treated using the present technique, enabling complete resection by lobectomy (including sleeve lobectomy in 3 patients) without major bleeding. The present procedure can expose pulmonary artery buried in scar tissue, resulting in making the lobectomy safer.

Propagação vegetativa de romã com material vegetal de diferentes origens sob tipos de substratos

Directory of Open Access Journals (Sweden)

Romulo Magno Oliveira de Freitas

2017-02-01

Full Text Available Objetivou-se com o presente trabalho verificar a influência de diferentes procedências do material vegetal e substratos na propagação vegetativa de romã (Punica granatum L.. Foi usado o delineamento estatístico inteiramente casualizado em esquema fatorial 2x3, sendo duas origens do material vegetal (Barreiras, CE e Mossoró, RN e três substratos (Tropstrato®, Fibra de coco e Solo, constituindo 6 tratamentos em quatro repetições de cinco estacas. As estacas foram preparadas com o auxilio de uma tesoura de poda, coletadas na posição mediana do ramo, padronizadas para o diâmetro de 2 a 4 mm. Aos 45 dias foram avaliados o número de brotos por estaca, comprimento do maior broto, número de folhas por estacas, comprimento da maior raiz, percentagem de estacas enraizadas, número de raízes por estaca, massa seca da brotação e massa seca do sistema radicular. A propagação por estaquia de romã é influenciada pela origem do material vegetal e o melhor material é de Barreiras, CE. Recomenda-se o substrato Tropstrato® para a produção de mudas de romã por estaquia.Vegetative propagation of pomegranate with vegetal material of different origins under types of substratesAbstract: The objective of this study to investigate the influence of different sources of plant material and substrates in the vegetative propagation of pomegranate (Punica granatum L.. The statistical design was completely randomized in a 2x3 factorial, with two origins of the plant material collected (Barreiras, CE and Mossoró, RN and three substrates (Tropstrato®, Coconut fiber and soil, constituting six treatments and four replications. Each replication consisted of five cuttings. Cuttings were prepared with the aid of a pruning shears collected in the median position of the branch for the standardized diameter of 2 to 4 mm. At 45 days, we assessed the number of shoots per cutting, length of the longest shoot, number of leaves per cutting, length of roots

Clonal multiplication of guava through softwood cuttings under mist conditions

International Nuclear Information System (INIS)

Kareem, A.; Jaskkani, M.J.; Fatima, B.; Sadia, B.

2012-01-01

Guava (psidium guajava l.) is a luscious and important tropical fruit crop. the objective of the study was to develop vegetative propagation system to avoid clonal degradation in guava fruit plants. softwood cuttings from five year old gola accession were prepared from the shoot tops of current season growth, measuring 12 cm in length and carrying 2 to 4 nodes. iba and naa (0, 2000, 4000, 6000, 8000 ppm) were selected to treat cuttings for root induction. cuttings were planted under mist conditions by maintaining temperature at 25 degree c and 85% relative humidity for 25 days. maximum survival percentage (92.17%) of plants at transplanting was noted with 4000 ppm concentration followed by 2000 ppm (85.50%). In general iba 4000 ppm concentration performed better as compared to naa for all parameters studied. This study revealed the potential of clonal propagation of guava through softwood cuttings treated with auxins. (author)

Effects of vegetable-based cutting fluids on the wear in drilling

Indian Academy of Sciences (India)

2016-08-26

Aug 26, 2016 ... In this study, performances of three VBCFs developed from crude sunflower oil, refined sunflower oil, refined canola oil and commercial semi-synthetic cutting fluid are compared in terms of tool wear, thrust force and surface roughness during drilling of AISI 304 austenitic stainless steel with HSSE tool.

FRUIT JUICES AS AN ALTERNATIVE TECHNIQUE FOR CONSERVATION OF FRESH-CUT BANANA

OpenAIRE

ANDERSON ADRIANO MARTINS MELO; LEONARDO THOMAZ DINIZ; ADRIANO DO NASCIMENTO SIMÕES; ROLF PUSCHMANN

2014-01-01

Browning discoloration after cutting is detrimental for the quality of a number of fruits and vegetables, such as banana, apple, pear, potato, and some roots such as cassava, yam, and others. Browning and softening compromise banana after cut shelf-life in a few hours under cold storage. Therefore, anti-browning compounds have been applied to slices before packing. Some commonly used substances are calcium chloride, ascorbic acid, cysteine and citric acid, in immersed inchemical mixtures. Rec...

Partial Cutting of Sternothyroid Muscle during Total Thyroidectomy: Impact on Postoperative Vocal Outcomes

Directory of Open Access Journals (Sweden)

Hyoung Shin Lee

2013-01-01

Full Text Available Background. Cutting the sternothyroid (ST muscle is a useful technique to expose the superior pole of thyroid gland during thyroidectomy. In this study, we evaluated the impact of partial cutting of the ST muscle on postoperative vocal outcomes after total thyroidectomy. Methods. A retrospective review of 57 patients who underwent total thyroidectomy with central neck dissection for micropapillary thyroid carcinoma was conducted. Group A (n=26 included those without cutting the ST muscle, while group B (n=31 included patients whose muscle was partially cut at the superior pole. All patients underwent voice analysis before the operation and 2 weeks and 1 month after the surgery, and the outcomes were compared between the two groups. Results. There were no differences between the two groups regarding the outcomes at each time of voice analysis. Group A showed a decrease of maximum frequency 2 weeks after surgery but showed no difference after 1 month. Group B showed a mild decrease in maximum frequency 2 weeks after surgery, but the difference was not significant. Conclusion. Partial cutting of ST muscle during thyroidectomy is useful to expose the superior pole without significant negative impact on postoperative outcomes of vocal analysis.

Understory Structure and Vascular Plant Diversity in Naturally Regenerated Deciduous Forests and Spruce Plantations on Similar Clear-Cuts: Implications for Forest Regeneration Strategy Selection

Directory of Open Access Journals (Sweden)

ZhiQiang Fang

2014-04-01

Full Text Available The active effect of natural regeneration on understory vegetation and diversity on clear-cut forestlands, in contrast to conifer reforestation, is still controversial. Here we investigated differences in understory vegetation by comparing naturally regenerated deciduous forests (NR and reforested spruce plantations (SP aged 20–40 years on 12 similar clear-cuts of subalpine old-growth spruce-fir forests from the eastern Tibetan Plateau. We found that 283 of the 334 vascular plant species recorded were present in NR plots, while only 264 species occurred in SP plots. This was consistent with richer species, higher cover, and stem (or shoot density of tree seedlings, shrubs, and ferns in the NR plots than in the SP plots. Moreover, understory plant diversity was limited under dense canopy cover, which occurred more frequently in the SP plots. Our findings implied that natural deciduous tree regeneration could better preserve understory vegetation and biodiversity than spruce reforestation after clear-cutting. This result further informed practices to reduce tree canopy cover for spruce plantations or to integrate natural regeneration and reforestation for clear-cuts in order to promote understory vegetation and species diversity conservation.

THE DEPENDENCE OF THE ROOTING OF CUTTINGS OF LAVENDER ON THE TIMING OF PROPAGATION AND THE AGE OF THE MOTHER PLANTS

OpenAIRE

Skipor O. B.; Zolotilov V. A.; Zolotilova O. M.

2015-01-01

The article is concerned with the features of Lavandula’s angustifolia vegetative propagation with methods of the propagation by herbaceous cuttings and of the annual woody cutting. The dependence of Lavandula’s varieties Sineva and Vdala rooting of cutting and the cutting grafting period and the age of the mother plantation was established. In the fixed years, the rooting rate of cuttings is 58-67%. The maximum annual hardwood cuttings rooting was observed from the fifth to the seventh year ...

Influence of leaf retention on cutting propagation of Lavandula dentata L.

Directory of Open Access Journals (Sweden)

Claudine Maria de Bona

2010-08-01

Full Text Available Vegetative propagation of lavender offers several advantages over sexual propagation, among them crop homogeneity and yield of higher quality essential oil. However, Lavandula species have been propagated mostly by seeds and are said to be recalcitrant to rooting when propagated by cuttings. During cutting propagation, one of the important variables that influence the rooting capacity of cuttings is the leaf retention. The objective of this work was to evaluate the influence of leaf retention on rooting of L. dentata cuttings. Apical cuttings of L. dentata of 10 cm in length, keeping approximately 1/3, 1/2 or 2/3 of their leaves were planted in commercial substrate Plantmax HT® under intermittent mist. After two months, averages of root number, length of the longest root, root fresh and dry weights, and the survival percentage were evaluated. Root length and fresh weight were statistically greater with 2/3 of leaf retention and when fewer leaves were kept on the cuttings, lower means of root dry weight was observed. Under the conditions applied in this study, greater leaf retention was better for rooting of L. dentata cuttings.

Microbiological variation amongst fresh and minimally processed vegetables from retail establishers - a public health study in Pakistan

Directory of Open Access Journals (Sweden)

Sair, A.T.

2017-07-01

Full Text Available Fresh and minimally processed ready to eat vegetables are very attractive eatables amongst consumers as convenient, healthy and readily available foods, especially in the South Asian states. They provide numerous nutrients, phytochemicals, and vitamins but also harbor extensive quantity of potentially pathogenic bacteria. The aim of this study was to determine microbiological variation amongst fresh vegetables that were commercially available to the public at numerous retail establishments in Pakistan in order to present an overview of the quality of fresh produce. A total of 133 samples, collected from local distributors and retailers were tested for aerobic mesophilic and psychrotrophic, coliform and yeast and mould counts. Standard plating techniques were used to analyze all samples. Mesophilic count ranged from 3.1 to 10.3 log CFU/g with lowest and highest counts observed in onions and fresh cut vegetables. Psychrotrophic microorganisms count was as high as mesophilic microorganisms. Maximum counts for coliform were found in fresh cut vegetables with 100% samples falling over 6 log CFU/g. These results were consistent with yeast and moulds as well. In our study, Escherichia coli was determined as an indicator organism for 133 samples of fresh and minimally processed vegetables. Fresh cut vegetables showed the highest incidence of presumptive E. coli (69.9%. The results showed a poor quality of fresh vegetables in Pakistan and point to the implementation of good hygiene practices and food safety awareness amongst local distributors, food handlers at retail establishments.

Vegetative Propagation and the Genetic Improvement of North American Hardwoods

Science.gov (United States)

R. E. Farmer

1973-01-01

Progress and problems in vegetative propagation of important North American hardwoods are reviewed with emphasis on rooting cuttings and the application of propagation techniques in breeding research. Some problems in rooting physiology are discussed.

Rooting of hybrid clones of Populus tremula L. x P. tremuloides Michx. by stem cuttings derived from micropropagated plants

Energy Technology Data Exchange (ETDEWEB)

Qibin Yu [Univ. of Helsinki (Finland). Dept. of Plant Biology; Maentylae, N. [Univ. of Turku (Finland). Dept. of Biology, Plant Physiology and Molecular Biology; Salonen, M. [Finnish Forest Research Inst., Laeyliaeinen (Finland). Haapastensyrjae Breeding Station

2001-07-01

Propagation costs could be cut by replacing part of the micropropagation process with steps involving more traditional techniques. This study explored possibilities for improving existing vegetative propagation techniques for aspen using stem cuttings obtained from micropropagated plants. Vegetative propagation through stem cuttings was studied in 10 micropropagated hybrid aspen clones (Populus tremula L. x P. tremuloides Michx). Cuttings containing one axillary bud were harvested from the same donor plants twice during the growing season: the first harvest in May and the second harvest in July. Rooting percentage was correlated positively with root length, number of roots and height of cutting plant but negatively with length of rooting. The average rooting percentage was 53% in the first harvest and 27% in second harvest. Indole-3-butyric acid treatments (1.2 mM) significantly improved rooting in the second harvest, but not in the first harvest, suggesting different endogenous auxin levels in the cuttings. A significant variation for most traits related to rooting ability was found among the clones, indicating that clonal effects play an important role in the propagation of aspen. Thus, clones with a good response in shoot growth and rooting could be exploited in large-scale propagation using stem cuttings.

Vegetative propagation of the endangered Azorean tree, Picconia azorica

OpenAIRE

Martins, José; Moreira, Orlando; Silva, Luís; Moura, Mónica

2011-01-01

Picconia azorica (Tutin) Knobl. (Oleaceae), commonly named “pau-branco”, is an endangered tree endemic to the Azores. Vegetative propagation may be important for the preservation of this species, particularly in depauperate populations, with low seed set. The objective of this study was to evaluate effective techniques for the vegetative propagation of P. azorica by rooting of stem cuttings or by air layering. Rooting substrate, IBA concentration, and the portion of the area of the terminal l...

Mechanisms of vegetation uprooting by flow in alluvial non-cohesive sediment

Directory of Open Access Journals (Sweden)

K. Edmaier

2011-05-01

Full Text Available The establishment of riparian pioneer vegetation is of crucial importance within river restoration projects. After germination or vegetative reproduction on river bars juvenile plants are often exposed to mortality by uprooting caused by floods. At later stages of root development vegetation uprooting by flow is seen to occur as a consequence of a marked erosion gradually exposing the root system and accordingly reducing the mechanical anchoring. How time scales of flow-induced uprooting do depend on vegetation stages growing in alluvial non-cohesive sediment is currently an open question that we conceptually address in this work. After reviewing vegetation root issues in relation to morphodynamic processes, we then propose two modelling mechanisms (Type I and Type II, respectively concerning the uprooting time scales of early germinated and of mature vegetation. Type I is a purely flow-induced drag mechanism, which causes alone a nearly instantaneous uprooting when exceeding root resistance. Type II arises as a combination of substantial sediment erosion exposing the root system and resulting in a decreased anchoring resistance, eventually degenerating into a Type I mechanism. We support our conceptual models with some preliminary experimental data and discuss the importance of better understanding such mechanisms in order to formulate sounding mathematical models that are suitable to plan and to manage river restoration projects.

Effect of minimal processing on physiology and quality of fresh-cut potatoes, a review

OpenAIRE

Rocculi, Pietro; Romani, Santina; Gomez, Federico; Dalla Rosa, Marco

2009-01-01

Fresh-cut fruit and vegetable are minimally processed products that have to maintain their quality (appearance, texture, flavour and nutritive value) similar to those of the fresh product. The fundamental principle underlying the quality of these commodities is that they are metabolic active tissues and, as a consequence, show physiological response to preparation procedures as well as to the environment created in the package in which they are enclosed. Minimal processing for fresh-cut potat...

Methanol production from Eucalyptus wood chips. Working Document 2. Vegetative propagation of Eucalypts

Energy Technology Data Exchange (ETDEWEB)

Fishkind, H.H.

1982-04-01

The feasibility of large-scale plantation establishment by various methods was examined, and the following conclusions were reached: seedling plantations are limited in potential yield due to genetic variation among the planting stock and often inadequate supplies of appropriate seed; vegetative propagation by rooted cuttings can provide good genetic uniformity of select hybrid planting stock; however, large-scale production requires establishment and maintenance of extensive cutting orchards. The collection of shoots and preparation of cuttings, although successfully implemented in the Congo and Brazil, would not be economically feasible in Florida for large-scale plantations; tissue culture propagation of select hybrid eucalypts offers the only opportunity to produce the very large number of trees required to establish the energy plantation. The cost of tissue culture propagation, although higher than seedling production, is more than off-set by the increased productivity of vegetative plantations established from select hybrid Eucalyptus.

Cutting device for spent local power range monitor

International Nuclear Information System (INIS)

Watanabe, Shigeru; Tsuji, Teruaki.

1976-01-01

Purpose: To prevent radioactive contamination of the reactor water and simplify the operation of transferring the spent local power range monitor to a pool and preparation of the space for storing the monitor in the pool by arranging it such that the monitor is cut in the reactor water and that its cut end is closed in the reactor water. Constitution: A device for clamping a spent local power range monitor disposed within the reactor core and for cutting the monitor such that the content will not be exposed are supported by support means such that they are spaced apart in the vertical direction, and the support means is suspended in the reactor water such that it is movable relative to the monitor. Thus, there is no need to mount the cutter in any separately provided support means, and there is no possibility of exposure of the content since the cut end of the monitor is closed by the outer frame. It is therefore possible to prevent contamination of the reactor water. (Horiuchi, T.)

OBS ervations on the vegetative propagation of the marine alga, Gelidiella acerosa (Forssk) Feldmann and Hamel

Digital Repository Service at National Institute of Oceanography (India)

Rao, P.P.S.; Tarwadi, S.J.; Chauhan, V.D.

of this the present work on the vegetative propagation of the alga was planned. The cultures of the vegetative cut pieces of a frond of the species were grown in different culture media. The culture media were of sea water enriched with inorganic nutrient...

Influence of the origin of stem cutting, season of collection and auxin ...

African Journals Online (AJOL)

Influence of the origin of stem cutting, season of collection and auxin application on the vegetative propagation of African Sandalwood ( Osyris lanceolata ) in Tanzania: scientific paper. ... The high nutrition status and low nitrogen content of basal portions may play a role in enhancing their performance. Thus when raising O.

Vida útil de produto minimamente processado composto por abóbora, cenoura, chuchu e mandioquinha-salsa Shelf life of fresh-cut composed of vegetables

Directory of Open Access Journals (Sweden)

Juliana Alvarenga Alves

2010-02-01

Full Text Available Objetivou-se avaliar o efeito do tempo de armazenamento sobre a qualidade de produto minimamente processado à base de hortaliças: abóbora (Cucurbita moschata Duch, cenoura (Daucus carota L., chuchu (Sechium edule Swartz e mandioquinha-salsa (Arracacia xanthorrhiza Bancroft. As hortaliças foram sanificadas em hipoclorito de sódio 200 mg.L-1, por 5 minutos, descascadas, manualmente, e cortadas utilizando-se processador. O produto processado foi sanificado em hipoclorito de sódio 50 mg.L-1, por 3 minutos, e apenas as mandioquinhas-salsa foram imersas em solução de ácido ascórbico 1%, por 2 minutos. As embalagens flexíveis de polietileno de baixa densidade linear (25 x 20 cm, contendo 400 g do "mix", foram armazenadas a 5ºC e 99% UR, por 8 dias. A firmeza e o valor L* das hortaliças estudadas não alteraram com o tempo de armazenamento. Os valores a* e b* da abóbora não oscilaram durante o armazenamento. O valor a* da mandioquinha-salsa e do chuchu aumentou e o da cenoura diminuiu com o armazenamento, enquanto o valor b* da cenoura, do chuchu e da mandioquinha-salsa reduziu. O "mix" apresentou taxa de perda de massa muito baixa e ascensão respiratória até o oitavo dia. A atmosfera de equilíbrio, em torno de 2,93% de O2 e 7,06% de CO2, foi alcançada no interior da embalagem, contendo o "mix", a partir do segundo dia. Não foi detectada a presença de coliformes a 45ºC e Salmonella sp. em nenhuma amostra. Os coliformes a 35ºC aumentaram durante o armazenamento. Conclui-se que, o produto minimamente processado, à base de hortaliças mantém a sua qualidade por 8 dias a 5ºC.The objective of this work was to evaluate the effect of storage time on the quality of fresh-cut product made up of four vegetables: pumpkin (Cucurbita moschata Duch, carrot (Daucus carota L., chayote (Sechium edule Swartz, and peruvian carrot (Arracaia xanthorrhiza Bancroft. The vegetables were sanitized in sodium hypochlorite solution (200 mg.L-1 for 5

Vegetative propagation of the Azorean endemic shrub Viburnum treleasei Gand

Directory of Open Access Journals (Sweden)

MÓNICA MOURA

2009-01-01

Full Text Available Viburnum treleasei Gand. is a threatened hermaphroditic shrub or small tree endemic to the Azores islands. In this study we aimed at defining a fast, simple and cost-efficient propagation methodology that could be used by non-skilled workers in conservation actionplans. Our objective was also to produce cleaner material for initiation of in vitro cultures and to determine the effects of season, placement of cuttings in the branch, placement of vegetative buds in cuttings and forcing solutions in shoot development. It was possible to produce clean shoots from cuttings using a forcing solution with 8-hydroxyquinoline sulphate (8-HQS, 2% sucrose and no growth regulators addition. Shoot development results obtained with apical and sub-apical cuttings indicate that V. treleasei possessesapical dominance and deep endodormancy. Apical semihardwood cuttings in autumn or airlayered branches in autumn and winter with 2 or 5% (w/w of IBA produced excellent rooting results which will allow reinforcing depleted populations of V. treleasei efficientlyand at reduced costs.

Reliable tool life measurements in turning - an application to cutting fluid efficiency evaluation

DEFF Research Database (Denmark)

Axinte, Dragos A.; Belluco, Walter; De Chiffre, Leonardo

2001-01-01

The paper proposes a method to obtain reliable measurements of tool life in turning, discussing some aspects related to experimental procedure and measurement accuracy. The method (i) allows and experimental determination of the extended Taylor's equation, with a limited set of experiments and (ii......) provides efficiency evaluation. Six cutting oils, five of which formulated from vegetable basestock, were evaluated in turning. Experiments were run in a range of cutting parameters. according to a 2, 3-1 factorial design, machining AISI 316L stainless steel with coated carbide tools. Tool life...

Plasma arc cutting: speed and cut quality

International Nuclear Information System (INIS)

Nemchinsky, V A; Severance, W S

2009-01-01

When cutting metal with plasma arc cutting, the walls of the cut are narrower at the bottom than at the top. This lack of squareness increases as the cutting speed increases. A model of this phenomenon, affecting cut quality, is suggested. A thin liquid layer, which separates the plasma from the solid metal to be melted, plays a key role in the suggested model. This layer decreases heat transfer from the plasma to the solid metal; the decrease is more pronounced the higher the speed and the thicker the liquid metal layer. Since the layer is thicker at the bottom of the cut, the heat transfer effectiveness is lower at the bottom. The decrease in heat transfer effectiveness is compensated by the narrowness of the cut. The suggested model allows one to calculate the profile of the cut. The result of the calculations of the cutting speeds for plates of various thicknesses, at which the squareness of the cut is acceptable, agrees well with the speeds recommended by manufacturers. The second effect considered in the paper is the deflection of the plasma jet from the vertical at a high cutting speed. A qualitative explanation of this phenomenon is given. We believe the considerations of this paper are pertinent to other types of cutting with moving heat sources.

Cutting

Science.gov (United States)

... Staying Safe Videos for Educators Search English Español Cutting KidsHealth / For Teens / Cutting What's in this article? ... Getting Help Print en español Cortarse What Is Cutting? Emma's mom first noticed the cuts when Emma ...

Thermographic measurements of high-speed metal cutting

Science.gov (United States)

Mueller, Bernhard; Renz, Ulrich

2002-03-01

Thermographic measurements of a high-speed cutting process have been performed with an infrared camera. To realize images without motion blur the integration times were reduced to a few microseconds. Since the high tool wear influences the measured temperatures a set-up has been realized which enables small cutting lengths. Only single images have been recorded because the process is too fast to acquire a sequence of images even with the frame rate of the very fast infrared camera which has been used. To expose the camera when the rotating tool is in the middle of the camera image an experimental set-up with a light barrier and a digital delay generator with a time resolution of 1 ns has been realized. This enables a very exact triggering of the camera at the desired position of the tool in the image. Since the cutting depth is between 0.1 and 0.2 mm a high spatial resolution was also necessary which was obtained by a special close-up lens allowing a resolution of app. 45 microns. The experimental set-up will be described and infrared images and evaluated temperatures of a titanium alloy and a carbon steel will be presented for cutting speeds up to 42 m/s.

Supplement Analysis for the Transmission System Vegetation Management Program FEIS (DOE/EIS-0285/SA-106)SnoKing Tap to Monroe-Samamish Line

Energy Technology Data Exchange (ETDEWEB)

Martin, Mark A. [Bonneville Power Administration, Portland, OR (United States)

2002-09-30

Vegetation Management along the SnoKing Tap to the Monroe-Samamish transmission line from structure 8/1 through structure 20/6. BPA proposes to remove unwanted vegetation along the right-of-way, access roads and around tower structures along the subject transmission line corridor. The right-of-way will be treated using selective and non-selective methods that include hand cutting, mowing and herbicide treatments. Approximately 12 miles of access roads will be cleared using selective and non-selective methods that include hand cutting, mowing and herbicide treatments. Approximately 65 tower sites will be treated using selective and non-selective methods that include hand cutting, mowing and herbicide treatments. Vegetation management is required for unimpeded operation and maintenance of the subject transmission line. See Section 1of the attached checklist for a complete description of the proposal.

Recommended domestic handling of fruits and vegetables to preserve their nutritional value

Directory of Open Access Journals (Sweden)

Julio Basulto

2014-06-01

Full Text Available The health benefits of daily consumption of at least 5 portions of a variety of fruit and vegetables are well documented. The World Health Organization (WHO public health goal, established in 600 grams per person/day, is not achieved in Spain, so it is important to improve access to these foods, maintain their potential nutritive value and overcome barriers for their consumption. The objectives of this paper are: facilitate responsible decision-making regarding health; maximize the nutritional value of fruit and vegetables, help overcome barriers for fruit and vegetables consumption and report on how their storage at home, their handling and cooking affect to nutritional value of fruit and vegetables.In order to minimize nutrients loss and improve their bioavailability during fruit and vegetables handling, the Association for the promotion of fruit and vegetables “5 a day” (Spain recommends: avoid prolonged storage of fruit and vegetables in the fridge; use layers and outer leaves; peel and/or cut them just before consumption; wash the whole pieces and then chop them; controlling the soaking time of cut pieces; prefer cooking techniques that do not require direct contact with water; a shorter cooking time, less loss of nutrients; the correct frying retains nutrients very well, although it is a technique of which should not be abused; add a few drops of vinegar or lemon juice to the cooking water if it does not change the taste and dish acceptance; use the water of cooking to elaborate other foods (e.g. sauces, soups, purees, etc. except those coming from chard, spinach or beets. The “5 a day” Association (Spain recommends increasing consumption of fruit and vegetables, and state that theloss of nutrients during their home handling should not be understood as a barrier for their consumption.

Radiation preservation of cut cabbage (Brassica oleracea): a case study in the Greater Accra Region

International Nuclear Information System (INIS)

Frimpong, K.G.

2011-01-01

Low fruit and vegetable intake is estimated to cause about 31% of ischaemic heart disease and 11% of stroke worldwide. It is estimated that up to 2.7 million lives could potentially be saved each year if fresh fruits and vegetables such as cabbage consumption was sufficiently increased. However, fresh or ready-to-eat vegetables have been found to be a potential cause of foodborne diseases due to their association with human pathogens. More so, some of these pathogens are resident in the vegetables. The application of ionizing irradiation has been identified as a promising technology that may be used to control spoilage or pathogenic microorganisms in order to increase shelf life, improve the safety of ready-to-eat fruits and vegetables and as a substitute for the use of chemical sterilants. The main objective of this research was to assess impact of gamma radiation in reducing microbial load on cut cabbage and how it helps to extend shelf life. Standard plate count method was used in the determination of total viable and coliform counts (TVC and TCC). Redox titration with iodine method was used in determining the total ascorbic acid content while antioxidant activity, total flavonoid and phenolic content were determined by DPPH, Folin-Ciocalteu and Aluminium chloride colorimetric method respectively. Nine-point Hedonic scale was also used for the sensory evaluation. The studies revealed that microbial numbers of E.coli, total viable and coliform counts on 'ready-to-eat' cut cabbage in most supermarkets in the Accra metropolitan area were beyond the acceptable national food legislations. Total viable and coliform counts record showed a combination treatment of irradiation doses (1 to 3kGy) and refrigeration temperature (8 ± 2degrees Celcius) reduced microbial growth by 3 to 5 log cycles. Fungal species like Mucor spp, Penicillium digitatum, and Rhizopus spp. Which are spoilage organisms were isolated from all unirradiated control samples but not irradiated (1-3k

Intensive ground vegetation growth mitigates the carbon loss after forest disturbance.

Science.gov (United States)

Zehetgruber, Bernhard; Kobler, Johannes; Dirnböck, Thomas; Jandl, Robert; Seidl, Rupert; Schindlbacher, Andreas

2017-01-01

Slow or failed tree regeneration after forest disturbance is increasingly observed in the central European Alps, potentially amplifying the carbon (C) loss from disturbance. We aimed at quantifying C dynamics of a poorly regenerating disturbance site with a special focus on the role of non-woody ground vegetation. Soil CO 2 efflux, fine root biomass, ground vegetation biomass, tree increment and litter input were assessed in (i) an undisturbed section of a ~ 110 years old Norway spruce stand, (ii) in a disturbed section which was clear-cut six years ago (no tree regeneration), and (iii) in a disturbed section which was clear-cut three years ago (no tree regeneration). Total soil CO 2 efflux was similar across all stand sections (8.5 ± 0.2 to 8.9 ± 0.3 t C ha -1  yr. -1 ). The undisturbed forest served as atmospheric C sink (2.1 t C ha -1  yr. -1 ), whereas both clearings were C sources to the atmosphere. The source strength three years after disturbance (-5.5 t C ha -1  yr. -1 ) was almost twice as high as six years after disturbance (-2.9 t C ha -1  yr. -1 ), with declining heterotrophic soil respiration and the high productivity of dense graminoid ground vegetation mitigating C loss. C loss after disturbance decreases with time and ground vegetation growth. Dense non-woody ground vegetation cover can hamper tree regeneration but simultaneously decrease the ecosystem C loss. The role of ground vegetation should be more explicitly taken into account in forest C budgets assessing disturbance effects.

Recycling of wood- and peat-ash. A successful way to establish full plant cover and dense birch stand on a cut-away peatland

Energy Technology Data Exchange (ETDEWEB)

Huotari, N.

2012-07-01

Mechanical harvesting of peat changes the original mire ecosystem completely, and without active measures these areas may remain non-vegetated even for decades. Afforestation is one of the most popular after-use options for cut-away peatlands in Finland since it has both economic and aesthetic values. Recycling of wood-ash as a fertilizer has been studied extensively in peatlands drained for forestry. Wood-ash is reported to promote tree growth in these areas without any significant negative impact to the environment and could, therefore, be a suitable option also on cut-away peatlands. However, the environmental effects of ash-fertilization on cut-away areas and on ground vegetation are not fully understood. The impact of wood- and peat-ash application on the early establishment of ground vegetation and downy birch (Betula pubescens) seedlings and on post-fertilization element concentrations in plants and peat substrate were studied in a cut-away peatland. Six treatments of wood-ash, peat-ash, biotite or Forest PK-fertilizer were replicated in three blocks in different mixtures and quantities corresponding to 50 kg ha-1 of phosphorus. All the fertilizers accelerated the revegetation of the bare peat surface significantly, whereas the establishment of plants in the unfertilized area was non-existent even several years after the peat harvesting had ceased. The most striking difference between the wood- and peat-ash-fertilizers and the commercial Forest PK-fertilizer was the extensive coverage of fire-loving moss species in all the areas where ash was spread. Wood- and peat-ash application also accelerated the germination and early establishment of downy birch seedlings more efficiently than the PK-fertilizer. Ground vegetation proved to be highly important in increasing the early biomass production and carbon sequestration on ash-fertilized cut-away peatland. In addition, the below-ground biomass was equal to the above-ground biomass, or even greater. Both wood- and

Radiosensitivity of apricot budsticks exposed to acute gamma rays and nursery observations on the second vegetative generation from irradiated buds

International Nuclear Information System (INIS)

Legave, J.M.; Garcia, G.

1988-01-01

Varietal improvement is essential if a new impetus is to be given to the French apricot crop. We have accordingly started a mutation breeding programme by bud irradiation. Because of the scarcity of bibliographical data, the first step was to study the budwood radiosensitivity of the apricot cultivars used as starting material. Budsticks of various cultivars were exposed to increasing doses of acute gamma rays. The physiological effects induced by irradiation were evaluated from bud survival and growth. These results allowed us, in the first instance, to fix the optimal dose range for dormant buds irradiated at 6 to 7 Gy/mm. Observations in the nursery on scions from the second vegetative generation (V2) already showed the limits of bud irradiation. Further observations in the orchard are need to estimate the value of this method for apricot breeding [fr

Dark exposure of petunia cuttings strongly improves adventitious root formation and enhances carbohydrate availability during rooting in the light.

Science.gov (United States)

Klopotek, Yvonne; Haensch, Klaus-Thomas; Hause, Bettina; Hajirezaei, Mohammad-Reza; Druege, Uwe

2010-05-01

The effect of temporary dark exposure on adventitious root formation (ARF) in Petuniaxhybrida 'Mitchell' cuttings was investigated. Histological and metabolic changes in the cuttings during the dark treatment and subsequent rooting in the light were recorded. Excised cuttings were exposed to the dark for seven days at 10 degrees C followed by a nine-day rooting period in perlite or were rooted immediately for 16 days in a climate chamber at 22/20 degrees C (day/night) and a photosynthetic photon flux density (PPFD) of 100micromolm(-2)s(-1). Dark exposure prior to rooting increased, accelerated and synchronized ARF. The rooting period was reduced from 16 days (non-treated cuttings) to 9 days (treated cuttings). Under optimum conditions, despite the reduced rooting period, dark-exposed cuttings produced a higher number and length of roots than non-treated cuttings. An increase in temperature to 20 degrees C during the dark treatment or extending the cold dark exposure to 14 days caused a similar enhancement of root development compared to non-treated cuttings. Root meristem formation had already started during the dark treatment and was enhanced during the subsequent rooting period. Levels of soluble sugars (glucose, fructose and sucrose) and starch in leaf and basal stem tissues significantly decreased during the seven days of dark exposure. This depletion was, however, compensated during rooting after 6 and 24h for soluble sugars in leaves and the basal stem, respectively, whereas the sucrose level in the basal stem was already increased at 6h. The association of higher carbohydrate levels with improved rooting in previously dark-exposed versus non-treated cuttings indicates that increased post-darkness carbohydrate availability and allocation towards the stem base contribute to ARF under the influence of dark treatment and provide energy for cell growth subject to a rising sink intensity in the base of the cutting. Copyright 2009 Elsevier GmbH. All rights reserved.

Contaminated Metal Components in Dismantling by Hot Cutting Processes

International Nuclear Information System (INIS)

Cesari, Franco G.; Conforti, Gianmario; Rogante, Massimo; Giostri, Angelo

2006-01-01

During the preparatory dismantling activities of Caorso's Nuclear Power Plant (NPP), an experimental campaign using plasma and oxyacetylene metal cutting processes has been performed and applied to plates and tubes exposed to the coolant steam of the reactor. The plant (Boiling Water Reactor, 870 MWe) was designed and built in the 70's, and it was fully operating by 1981 to 1986 being shut down after 1987 Italy's poll that abrogated nuclear power based on U235 fission. The campaign concerns no activated materials, even if the analyses have been performed of by use contaminated components under the free release level, not yet taking into account radioactivity. In this paper, the parameters related to inhalable aerosol, solid and volatile residuals production have been, studied during hot processes which applies the same characteristics of the cutting in field for the dismantling programs of Caorso NPP. The technical parameters such as cutting time and cutting rate vs. pipe diameter/thickness/schedule or plate thickness for ferritic alloys and the emissions composition coming from the sectioning are also reported. The results underline the sort of trouble that can emerge in the cutting processes, in particular focusing on the effects comparison between the two cutting processes and the chemical composition of powders captured by filtering the gaseous emission. Some preliminary considerations on methodology to be used during the dismantling have been presented. (authors)

Determination of cut front position in laser cutting

Science.gov (United States)

Pereira, M.; Thombansen, U.

2016-07-01

Laser cutting has a huge importance to manufacturing industry. Laser cutting machines operate with fixed technological parameters and this does not guarantee the best productivity. The adjustment of the cutting parameters during operation can improve the machine performance. Based on a coaxial measuring device it is possible to identify the cut front position during the cutting process. This paper describes the data analysis approach used to determine the cut front position for different feed rates. The cut front position was determined with good resolution, but improvements are needed to make the whole process more stable.

Seed Germination and Cuttings Growth of Piper Aduncum

Science.gov (United States)

Susanto, D.; Sudrajat; Suwinarti, W.; Amirta, R.

2018-04-01

Sirih hutan (Piper aduncum L) is one of group shurbs tropical species, has potential to be developed as raw material of biomass based electricity. The aim of this research was to know seed germination and cuttings growth of P. aduncum plant as the first step in cultivation of this plant. Observation of flowers and fruits were done in secondary forest, while seed germination and growth of shoot cuttings were done in the laboratory. The results showed that P. aduncum seeds can be germinated in a relatively short time of 17 to 25 days with a fairly high germination percentage of 90 ± 8.16% and germination rate of 4.7 ± 0.34%. The growth of seedlings at 2 months old was 4.78 ± 0.42 cm, plant height 3.97 ± 0.27 cm, and relative growth rate 0.33 ± 0.14%. The treatment of synthetic growth regulator had significant effect on shoot growth and root number on the plant stem cuttings. Preparation of seedlings ready to plant in a generative and vegetative for cultivation of these plants in the experimental plot.

Experimental testing of exchangeable cutting inserts cutting ability

OpenAIRE

Čep, Robert; Janásek, Adam; Čepová, Lenka; Petrů, Jana; Hlavatý, Ivo; Car, Zlatan; Hatala, Michal

2013-01-01

The article deals with experimental testing of the cutting ability of exchangeable cutting inserts. Eleven types of exchangeable cutting inserts from five different manufacturers were tested. The tested cutting inserts were of the same shape and were different especially in material and coating types. The main aim was both to select a suitable test for determination of the cutting ability of exchangeable cutting inserts and to design such testing procedure that could make it possible...

Vegetated Riprap Installation Techniques for Steambank Protection, Fish and Wildlife Habitat Creation

Science.gov (United States)

Raymond, Pierre

2014-05-01

Vegetated riprap is a cost effective alternative to conventional riprap erosion protection. Terra Erosion Control has experimented with the vegetation of riprap over the past ten years. As a result we have adapted a technique that can successfully establish vegetation during the installation of riprap structures. This presentation will demonstrate innovative ways of installing vegetated riprap for the protection of access roads on industrial sites and urban infrastructure such as storm water outfalls, bridge approaches and pedestrian pathways within public areas. This vegetation will provide additional bank protection, soften the rock appearance and enhance fish, wildlife and urban habitat along the shoreline. Vegetated riprap incorporates a combination of rock and native vegetation in the form of live cuttings. These are planted in conjunction with the placement of rock used to armour the banks of watercourses. Establishment of native vegetation will improve fish habitat by creating shade, cover and an input of small organic debris to stream banks. In most cases it will negate the need for the regulator (Canadian Department of Fisheries and Oceans) to require habitat alteration compensation. It will also provide added bank protection through the development of root mass. Adding vegetation to riprap provides a softer, more natural appearance to the installed rocks. This presentation will detail the processes involved in the installation of vegetated riprap such as the harvesting and soaking of live material, site preparation of the stream bank, placement of riprap in conjunction with live material and the use of burlap/coir fabric and soil amendments. It will also discuss the innovative method of using wooden boards to protect live cuttings during construction and to direct precipitation and/or irrigation water to the root zone during the establishment phase of the vegetation. These boards will eventually biodegrade within the rock. This approach was applied over

Determination of cut front position in laser cutting

International Nuclear Information System (INIS)

Pereira, M; Thombansen, U

2016-01-01

Laser cutting has a huge importance to manufacturing industry. Laser cutting machines operate with fixed technological parameters and this does not guarantee the best productivity. The adjustment of the cutting parameters during operation can improve the machine performance. Based on a coaxial measuring device it is possible to identify the cut front position during the cutting process. This paper describes the data analysis approach used to determine the cut front position for different feed rates. The cut front position was determined with good resolution, but improvements are needed to make the whole process more stable. (paper)

Rapid Vegetative Propagation Method for Carob

OpenAIRE

Hamide GUBBUK; Esma GUNES; Tomas AYALA-SILVA; Sezai ERCISLI

2011-01-01

Most of fruit species are propagated by vegetative methods such as budding, grafting, cutting, suckering, layering etc. to avoid heterozygocity. Carob trees (Ceratonia siliqua L.) are of highly economical value and are among the most difficult to propagate fruit species. In the study, air-layering propagation method was investigated first time to compare wild and cultivated (�Sisam�) carob types. In the experiment, one year old carob limbs were air-layered on coco peat medium by wrapping with...

Introduction of Pseudomonas aeruginosa into a Hospital via Vegetables

Science.gov (United States)

Kominos, Spyros D.; Copeland, Charles E.; Grosiak, Barbara; Postic, Bosko

1972-01-01

Pseudomonas aeruginosa was isolated from tomatoes, radishes, celery, carrots, endive, cabbage, cucumbers, onions, and lettuce obtained from the kitchen of a general hospital, with tomatoes yielding both highest frequencies of isolation and highest counts. Presence of P. aeruginosa on the hands of kitchen personnel and cutting boards and knives which they used suggests acquisition of the organism through contact with these vegetables. It is estimated that a patient consuming an average portion of tomato salad might ingest as many as 5 × 103 colony-forming units of P. aeruginosa. Pyocine types of P. aeruginosa isolated from clinical specimens were frequently identical to those recovered from vegetables, thus implicating tomatoes and other vegetables as an important source and vehicle by which P. aeruginosa colonizes the intestinal tract of patients. PMID:4628795

Proximity and Visibility of Fruits and Vegetables Influence Intake in a Kitchen Setting among College Students

Science.gov (United States)

Privitera, Gregory J.; Creary, Heather E.

2013-01-01

The hypothesis that participants will eat more fruits (apple slices) and vegetables (carrot cuts) if they are made more proximate and visible was tested using a 2 × 2 between-participants design. Proximity was manipulated by placing fruits and vegetables in a bowl at a table where participants sat (near) or 2 m from the table (far). Visibility was…

Dynamic modeling of the cesium, strontium, and ruthenium transfer to grass and vegetables

International Nuclear Information System (INIS)

Renaud, P.; Real, J.; Maubert, H.; Roussel-Debet, S.

1999-01-01

From 1988 to 1993, the Nuclear Safety and Protection Institute (Institut de Protection et de Surete Nucleaire -- IPSN) conducted experimental programs focused on transfers to vegetation following accidental localized deposits of radioactive aerosols. In relation to vegetable crops (fruit, leaves, and root vegetables) and meadow grass these experiments have enabled a determination of the factors involved in the transfer of cesium, strontium, and ruthenium at successive harvests, or cuttings, in respect of various time lags after contamination. The dynamic modeling given by these results allows an evaluation of changes in the mass activity of vegetables and grass during the months following deposit. It constitutes part of the ASTRAL post-accident radioecology model

Core Cutting Test with Vertical Rock Cutting Rig (VRCR)

Science.gov (United States)

Yasar, Serdar; Osman Yilmaz, Ali

2017-12-01

Roadheaders are frequently used machines in mining and tunnelling, and performance prediction of roadheaders is important for project economics and stability. Several methods were proposed so far for this purpose and, rock cutting tests are the best choice. Rock cutting tests are generally divided into two groups which are namely, full scale rock cutting tests and small scale rock cutting tests. These two tests have some superiorities and deficiencies over themselves. However, in many cases, where rock sampling becomes problematic, small scale rock cutting test (core cutting test) is preferred for performance prediction, since small block samples and core samples can be conducted to rock cutting testing. Common problem for rock cutting tests are that they can be found in very limited research centres. In this study, a new mobile rock cutting testing equipment, vertical rock cutting rig (VRCR) was introduced. Standard testing procedure was conducted on seven rock samples which were the part of a former study on cutting rocks with another small scale rock cutting test. Results showed that core cutting test can be realized successfully with VRCR with the validation of paired samples t-test.

Literature Review - Vegetation on Levees

Science.gov (United States)

2010-12-01

topography resulting from catastrophic wind (Hurricane Opal ) was measured across a variety of forest types. Study Location: Coweeta Basin, western North...Series/Source: Ecology, 1973. 54(2):445-448 Peer-reviewed: Yes Code: RTSYST, ECOSYS Abstract* : Strip- mine high walls and road cuts less than...by visual observations. Study Location: North-central WV ERDC SR-10-2 225 Method: Root profiles were examined at exposed high-walled strip mine

Propagação vegetativa da alfavaca-cravo utilizando diferentes tipos de estacas e substratos Vegetative propagation of the wild basil using different types of cuttings and substrata

Directory of Open Access Journals (Sweden)

Polyana Aparecida D. Ehlert

2004-03-01

Full Text Available A propagação vegetativa é considerada importante ferramenta para o melhoramento de espécies lenhosas e herbáceas e vem sendo amplamente utilizada, visando melhorar e manter variedades de importância econômica e medicinal. Neste contexto utilizou-se estacas de alfavaca-cravo de 15 cm para apicais e 25 cm para as medianas, sendo estas com e sem folhas. As estacas foram plantadas em bandejas de isopor de 72 células, utilizando-se 10 substratos. Após 35 dias, as estacas foram retiradas com cuidado, sendo as partes aéreas e radiculares separadas e acondicionadas em saco de papel e mantidas em estufa a 70ºC por 48 h para posterior avaliação da matéria seca. Analisou-se a percentagem de enraizamento, número de folhas na estaca, peso de matéria seca de folha e de raiz. Não houve interação significativa entre os diferentes tipos de substrato e estaca para percentagem de enraizamento, sendo que os substratos de modo geral diferiram pouco entre si. Entre os tipos de estaca destacaram-se para esta variável a mediana sem folha e a apical com folha. Para as demais variáveis houve interação significativa entre o tipo de estaca e o substrato. A melhor estaca foi a mediana sem folhas plantadas em substrato arisco + esterco + húmus e vermiculita nas seguintes proporções: 20%:40%:40%; 40%:20%:40% e 40%:40%.The vegetative propagation is an important tool for the improvement of woody and herbaceous species and could be an important tool to improve and to maintain varieties of economic and medicinal importance. In this experiment cuttings 15 cm long of the apical portion and also 25 cm long cuttings of the medial portion of the stems, were used both with and without leaves. The cuttings were planted on styrofoam trays with 72 cells, using 10 different substrata. After 35 days, cuttings were carefully removed, the aerial portion being separated from the roots and conditioned in paper bags and maintained in a stove at 70ºC for 48 h, for the

Improved cutting performance in high power laser cutting

DEFF Research Database (Denmark)

Olsen, Flemming Ove

2003-01-01

Recent results in high power laser cutting especially with focus on cutting of mild grade steel types for shipbuilding are described.......Recent results in high power laser cutting especially with focus on cutting of mild grade steel types for shipbuilding are described....

New Developments in Mass Spectrometry for Group-Type Analysis of Petroleum Cuts (First Part

Directory of Open Access Journals (Sweden)

Fafet A.

1999-07-01

Full Text Available Characterization of petroleum cuts constitutes a necessary stage to perfect understanding of the reaction mechanisms and to the description of the kinetics of certain refining processes such as hydrotreating or catalytic cracking. Mass spectrometry (MS, thanks to group-type quantitative analysis methods, enables to access detailed description of complex hydrocarbon mixtures such as middle distillates or heavy cuts such as vacuum distillates. But these methods are also subject to some drawbacks and we shall expose, thereunder, two examples of improvements. In a first part, the accuracy of MS quantification of thiophenic sulphured compounds in middle distillates is studied by intertechnique comparison with the results obtained by gas phase chromatography coupled to sulphur-specific detection by chemiluminescence (GC/SCD. Improving on the MS method is suggested. In the second part, a new system for introducing the sample in the spectrometer source, dedicated to group-type analysis of heavy cuts is described. Its validation, by comparison of the MS results to those of liquid chromatography (LC as well as its performances, is exposed.

Assessing the effect of food exposure on children's identification and acceptance of fruit and vegetables.

Science.gov (United States)

Schindler, Jennifer M; Corbett, Denise; Forestell, Catherine A

2013-01-01

Currently, fewer than 15% of children between the ages of 4-8 years consume the recommended levels of fruit and vegetables. In order to address this serious public health issue, a variety of nutrition programs have been implemented across the United States which have varied in their success. The present research analyzed the effectiveness of providing fruit and vegetable exposure as part of a school nutrition program. Kindergarten students at two schools (N=59) were exposed to interactive activities about healthy eating and physical activity. In addition, those at one school (n=29) were exposed to a variety of fruits and vegetables as part of this program. Assessment of children's ability to identify and their willingness to try fruit and vegetables before and after the program indicated that while all children were better able to identify a range of fruit, only those who received exposure to healthful foods were more willing to try fruit after the program. There were no changes in their identification or willingness to eat vegetables. These results suggest that schools should provide exposure to a variety of healthy foods as part of their nutrition programs. Such programs should focus specifically on exposing children to vegetables because increasing children's willingness to try foods that are typically considered unpalatable may be especially challenging. Published by Elsevier Ltd.

Twice cutting method reduces tibial cutting error in unicompartmental knee arthroplasty.

Science.gov (United States)

Inui, Hiroshi; Taketomi, Shuji; Yamagami, Ryota; Sanada, Takaki; Tanaka, Sakae

2016-01-01

Bone cutting error can be one of the causes of malalignment in unicompartmental knee arthroplasty (UKA). The amount of cutting error in total knee arthroplasty has been reported. However, none have investigated cutting error in UKA. The purpose of this study was to reveal the amount of cutting error in UKA when open cutting guide was used and clarify whether cutting the tibia horizontally twice using the same cutting guide reduced the cutting errors in UKA. We measured the alignment of the tibial cutting guides, the first-cut cutting surfaces and the second cut cutting surfaces using the navigation system in 50 UKAs. Cutting error was defined as the angular difference between the cutting guide and cutting surface. The mean absolute first-cut cutting error was 1.9° (1.1° varus) in the coronal plane and 1.1° (0.6° anterior slope) in the sagittal plane, whereas the mean absolute second-cut cutting error was 1.1° (0.6° varus) in the coronal plane and 1.1° (0.4° anterior slope) in the sagittal plane. Cutting the tibia horizontally twice reduced the cutting errors in the coronal plane significantly (Pcutting the tibia horizontally twice using the same cutting guide reduced cutting error in the coronal plane. Copyright © 2014 Elsevier B.V. All rights reserved.

Effects of drilling cuttings on the behavior of the Norway lobster Nephrops norvegicus

Energy Technology Data Exchange (ETDEWEB)

Richardson, C A

1984-05-01

Small quantities of drilling cuttings (100 g/250 cm/sup 2/) were found to affect both the survival and general behavior of Nephrops norvegicus held in experimental aquaria. In one experiment volatile hydrocarbons released from the cuttings caused a significant decrease in the heat of the exopodite on the third maxilliped. Flicking rates of the antennule and the time taken to identify and capture food introduced into the tanks were unaffected by exposure to cuttings. When the water flow through the tanks was interrupted for 12 h, 58% of animals died after exposure to the highest concentration of cuttings but those at the lower concentrations survived. After the water flow was restored the remaining survivors showed disorientated behavior and uncoordinated movements which lasted for about 36 h. In this condition animals will be more vulnerable to predators. This unnatural behavior may have serious implications for natural populations exposed to cuttings discharge in the close vicinity of offshore drilling platforms. 11 references, 3 tables.

The properties degradation of exposed GFRP roof

Science.gov (United States)

Zainudin, Mohammad; Diharjo, Kuncoro; Kaavessina, Mujtahid; Setyanto, Djoko

2018-02-01

There is much consideration of roof selection as a protector of a building against the outside weather, such as lightweight, strong stiff, corrosion resistant and guarantee for the availability of products. Based on these considerations, glass fiber reinforced polymer (GFRP) roof is a roof which can fulfill the requirement. The objective of this research is to investigate the degradation of physical and mechanical properties of GFRP roof exposed in outside weather. This GFRP roof composite was produced using a sheet molding compound (SMC) supplied by PT Intec Persada, Tangerang, Indonesia. There are two kinds GFRP roofs evaluated in this research that are GFRP roof exposed within 7 years and new GFRP roof that has not been exposed. The GFRP roofs were cut manually for preparing the specimens for hardness test, tensile test, SEM and FTIR test. The results show that the GFRP roof exposed within 7 years had the degradation of properties compared to the new GFRP roof. The exposed GFRP roof had lower strength and hardness compared to the new GFRP roof. The SEM observation indicates that exposed GFRP roof had the debonding of fiber on the surface, and in contrast, there are no debonding of fiber in the new GFRP roof surface. It can be recommended that the exposed GFRP roof may be repaired to enhance its performance and can re-increase its properties using the coating.

Regeneration in mixed conifer shelterwood cuttings in the Cascade Range of eastern Oregon.

Science.gov (United States)

K.W. Seidel

1979-01-01

A survey of shelterwood cuttings in mixed conifer forests in the eastern Oregon Cascade Range showed that, on the average, shelterwood units were well stocked with a mixture of advance, natural subsequent, and planted reproduction of a number of species. Because of slow invasion by understory vegetation, frequent heavy seed crops, and adequate density of the overstory...

Influence of a Vertical Cutting Device on Brassica Napus Seed Loss in Direct Combining

Energy Technology Data Exchange (ETDEWEB)

Pari, L.; Fedrizzi, M.; Assirelli, A. (Consiglio per la Ricerca e la Sperimentazione in Agricoltura, Unita di Ricerca per l' Ingegneria Agraria, Monterotondo, RM (Italy))

2008-10-15

EU requires that by 2010 5.65% of diesel fuel must be of vegetable origin. To reduce Italian dependence from imported palm oil, it is necessary to increase national production of vegetable oils: together with sunflower and soybean, canola (Brassica napus or Brassica napus oleifera) is an interesting possibility to satisfy vegetable oil demand, that is rapidly increasing for its use in biodiesel production. In Italy potential areas are available for the cultivation in relation to adequate rainfall and mild winters, that are very promising factors for canola production. However, the long period of seed maturity, non uniform growth, natural dehiscent process and variable weather conditions, such as wind and rain, are some of the factors which can lead to large seed losses: this is the main problem limiting this specie diffusion. Amongst available harvesting techniques, direct harvest of canola is an hazardous practice because there are several important questions related to it. The success of canola may depend on research initiatives to reduce some of the obstacles associated with its growing. The objective of this study is to determine if different cropping heads in direct combining can reduce seed losses. In Northern Italy (Piedmont) the trials were conducted in a 16 ha canola cultivation, in which was seeded the -Lion variety of canola. In order to realize direct harvest, the combine cylinder speed was regulated as slow as possible (500 rpm), the concave was opened at 3/4 of the way (about 25 mm clearance) and the fan speed was set at 2/3 of small grain settings (800 rpm). Only one combine was used for the trials, a New Holland CX 9080, in order to avoid any influence on seed losses. The combine was equipped with two different cutting heads: a common wheat type (type 1) and another, similar to the first, but equipped with vertical cutting devices on both ends of the head (type 2), because the plants are very dense and entangled. The losses of seeds were measured

Peroxidase activity and sensory quality of ready to cook mixed vegetables for soup: combined effect of biopreservatives and refrigerated storage

Directory of Open Access Journals (Sweden)

María Victoria Alvarez

2015-03-01

Full Text Available Enzymatic senescence processes and browning of fresh cut vegetables negatively affect their sensory properties and nutritional value and finally result in the rejection of affected products by consumers. In order to prevent quality decay, the combined effects of natural antioxidants and storage temperature on peroxidase activity and sensory attributes (overall visual quality, browning and odor of individual and mixed vegetables for soup (butternut squash, leek and celery were evaluated. Fresh cut vegetables were treated with antioxidant solutions as tea tree essential oil (15 μl/mL, propolis extract (15 μl/mL and gallic acid (2 mg/mL and stored at optimal (5 °C and abusive (15 °C temperature for a maximum of 14 days. The application of natural preservatives, plus optimal storage conditions, exerted significant inhibitory effects in peroxidase activity of squash, celery and mixed vegetables throughout the storage. Furthermore, propolis treatment applied on mixed vegetables retarded browning appearance and preserved the visual quality for a longer period when compared to untreated product.

The role of the implementation angle of cuttings of Phyllanthus sellowianus as a reference for a soil protection measure against surface erosion

Science.gov (United States)

Rauch, H. P.; Sutili, F. J.; Aschbacher, M.; Müller, B.

2009-04-01

Cutting plantation is a very common method of soil bioengineering techniques. The potential of vegetative reproduction is used to install a vegetation cover on eroded slopes to prevent surface erosion. The development of above and below biomass from parts of the stock plant in a very short time and the fast and easy propagation are one of the most important advantages of this soil bioengineering type. Several handbooks (Schiechtl, 1992; Florineth, 2004 and Zeh, 2007) suggest potential plants for vegetative reproduction and describe the procedure of plantation in detail. It is recommended that the cuttings are not driven vertically into the ground. A flat implementation angle guarantees a more uniform rooting of the cutting part driven into the soil, however there are no systematically investigations of the impact of the implementation angle on the biomass performance and consequently on the performance as a surface erosion protection measure. This paper shows results from field investigations focusing on the problem of the impact of the implementation angle of cuttings. In sum 75 specimens of the species of Phyllanthus sellowianus. The plant species was recommended as a native potential soil bioengineering plant by Sutili (s. Sutili, 2006). The cuttings were planted with an average length of 50 cm and diameter of 2 cm. The implementation angle differences between 90 (vertical) 45 and 10 degree. Two months after plantation all plants were excavated and the relevant plant data sets were collected in order to analyse the biomass performance. The field investigations are part of an integrated research project of the University of Natural Resources and Applied Life Sciences, Vienna and the Federal University of Santa Maria, Rio Grande do Sul - Brazil.

Suitability of vegetation for erosion control on uranium mill tailings: a regional analysis

International Nuclear Information System (INIS)

Beedlow, P.A.; McShane, M.C.

1983-11-01

Inactive uranium mill tailings (UMTRAP sites) in the West were grouped into three major climatic regions to evaluate the adequacy of vegetation for long-term stabilization: the Colorado Plateau, the West Slope of the Rocky Mountains, and the Northern Great Plains. Four general vegetation types were found at western sites: grasslands, shrub-steppe, and saltshrub and woodland. Soil-loss rates, calculated using the Universal Soil Loss Equation, were variable within regions and vegetation types, but trends were apparent. Calculations indicated that vegetation or vegetation plus a layer of surface rock provided adequate stabilization against long-term average soil loss for slopes less than 10% at the UMTRAP sites evaluated. However, detailed analyses of erosion due to severe storm events, gully formation and channel cutting is necessary for designing protective covers at each site. 11 references, 3 figures, 3 tables

Pengkajian Penerapan Teknik Budidaya Rhizophora mucronata dengan Stek Hipokotil (Study on Propagation Technique Application of Rhizophora mucronata Using Hypocotyl Cutting System

Directory of Open Access Journals (Sweden)

Neni Mulyani

2007-01-01

Full Text Available Research on the vegetative propagation of Rhizophora mucronata using hypocotyl cutting sistem was carried out at Faculty of Forestry, Bogor Agricultural University. Histological analysis of adventitous shoot was done at Biotechnology and Tree Breeding Laboratory, SEAMEO-BIOTROP. Three types of hypocotyl cutting (complete hypocotyl, top part of cut-hypocotyl and bottom part of cut-hypocotyl were induced using 6-BAP hormones at 0 and 500 ppm. Adventitous shoot of bottom part of cut-hypocotyl appeared 140 days after planting. Shoot from complete hypocotyl and top part of cut-hypocotyl grew earlier than adventitous shoot from bottom part of cut-hypocotyl. Hystologycal analysis of adventitous shoot showed the existance of primary meristem, stipule and leaf primordia. The growth of complete hipocotyl was higher than both of top part of cut-hypocotyl and bottom part of cut-hypocotyl. There was no effect of hormone induction on the shoot growth of them.

The suitability of vegetation for erosion control on uranium mill tailings: A regional analysis

International Nuclear Information System (INIS)

Beedlow, P.A.; McShane, M.C.

1984-01-01

Inactive uranium mill tailings (UMTRAP sites) in the West were grouped into three major climatic regions to evaluate the suitability of vegetation for long-term stabilization: the Colorado Plateau, the West Slope of the Rocky Mountains, and the Northern Great Plains. Four general vegetation types were found at western sites: grassland, shrub, salt shrub and woodland. Soil-loss rates, calculated using the Universal Soil Loss Equation, were variable within regions and vegetation types, but trends were apparent. Calculations indicated that vegetation or vegetation plus a layer of surface rock provided adequate stabilization against long-term average soil loss on slopes of less than 10%. However, at each site, detailed analyses of erosion caused by severe storm events, gully formation and channel cutting is necessary for designing protective covers

Vegetation Response to Western Juniper Slash Treatments

Science.gov (United States)

O'Connor, Casey; Miller, Rick; Bates, Jonathan D.

2013-09-01

The expansion of piñon-juniper woodlands the past 100 years in the western United States has resulted in large scale efforts to kill trees and recover sagebrush steppe rangelands. It is important to evaluate vegetation recovery following woodland control to develop best management practices. In this study, we compared two fuel reduction treatments and a cut-and-leave (CUT) treatment used to control western juniper ( Juniperus occidentalis spp. occidentalis Hook.) of the northwestern United States. Treatments were; CUT, cut-and-broadcast burn (BURN), and cut-pile-and-burn the pile (PILE). A randomized complete block design was used with five replicates of each treatment located in a curl leaf mahogany ( Cercocarpus ledifolius Nutt. ex Torr. & A. Gray)/mountain big sagebrush ( Artemisia tridentata Nutt. spp. vaseyana (Rydb.) Beetle)/Idaho fescue ( Festuca idahoensis Elmer) association. In 2010, 4 years after tree control the cover of perennial grasses (PG) [Sandberg's bluegrass ( Poa secunda J. Pres) and large bunchgrasses] were about 4 and 5 % less, respectively, in the BURN (7.1 ± 0.6 %) than the PILE (11.4 ± 2.3 %) and CUT (12.4 ± 1.7 %) treatments ( P < 0.0015). In 2010, cover of invasive cheatgrass ( Bromus tectorum L.) was greater in the BURN (6.3 ± 1.0 %) and was 50 and 100 % greater than PILE and CUT treatments, respectively. However, the increase in perennial bunchgrass density and cover, despite cheatgrass in the BURN treatment, mean it unlikely that cheatgrass will persist as a major understory component. In the CUT treatment mahogany cover increased 12.5 % and density increased in from 172 ± 25 to 404 ± 123 trees/ha. Burning, killed most or all of the adult mahogany, and mahogany recovery consisted of 100 and 67 % seedlings in the PILE and BURN treatments, respectively. After treatment, juniper presence from untreated small trees (<1 m tall; PILE and CUT treatments) and seedling emergence (all treatments) represented 25-33 % of pre-treatment tree

Microbial evaluation of fresh, minimally-processed vegetables and bagged sprouts from chain supermarkets.

Science.gov (United States)

Jeddi, Maryam Zare; Yunesian, Masud; Gorji, Mohamad Es'haghi; Noori, Negin; Pourmand, Mohammad Reza; Khaniki, Gholam Reza Jahed

2014-09-01

The aim of this study was to evaluate the bacterial and fungal quality of minimally-processed vegetables (MPV) and sprouts. A total of 116 samples of fresh-cut vegetables, ready-to-eat salads, and mung bean and wheat sprouts were randomly collected and analyzed. The load of aerobic mesophilic bacteria was minimum and maximum in the fresh-cut vegetables and fresh mung bean sprouts respectively, corresponding to populations of 5.3 and 8.5 log CFU/g. E. coli O157:H7 was found to be absent in all samples; however,  other E. coli strains were detected in 21 samples (18.1%), and Salmonella spp. were found in one mung bean (3.1%) and one ready-to-eat salad sample (5%). Yeasts were the predominant organisms and were found in 100% of the samples. Geotrichum, Fusarium, and Penicillium spp. were the most prevalent molds in mung sprouts while Cladosporium and Penicillium spp. were most frequently found in ready-to-eat salad samples. According to results from the present study, effective control measures should be implemented to minimize the microbiological contamination of fresh produce sold in Tehran, Iran.

Microbial Evaluation of Fresh, Minimally-processed Vegetables and Bagged Sprouts from Chain Supermarkets

Science.gov (United States)

Jeddi, Maryam Zare; Yunesian, Masud; Gorji, Mohamad Es'haghi; Noori, Negin; Pourmand, Mohammad Reza

2014-01-01

ABSTRACT The aim of this study was to evaluate the bacterial and fungal quality of minimally-processed vegetables (MPV) and sprouts. A total of 116 samples of fresh-cut vegetables, ready-to-eat salads, and mung bean and wheat sprouts were randomly collected and analyzed. The load of aerobic mesophilic bacteria was minimum and maximum in the fresh-cut vegetables and fresh mung bean sprouts respectively, corresponding to populations of 5.3 and 8.5 log CFU/g. E. coli O157:H7 was found to be absent in all samples; however,  other E. coli strains were detected in 21 samples (18.1%), and Salmonella spp. were found in one mung bean (3.1%) and one ready-to-eat salad sample (5%). Yeasts were the predominant organisms and were found in 100% of the samples. Geotrichum, Fusarium, and Penicillium spp. were the most prevalent molds in mung sprouts while Cladosporium and Penicillium spp. were most frequently found in ready-to-eat salad samples. According to results from the present study, effective control measures should be implemented to minimize the microbiological contamination of fresh produce sold in Tehran, Iran. PMID:25395902

Vegetative propagation of Cecropia obtusifolia (Cecropiaceae

Directory of Open Access Journals (Sweden)

Louis M. LaPierre

2001-12-01

Full Text Available Cecropia is a relatively well-known and well-studied genus in the Neotropics. Methods for the successful propagation of C. obtusifolia Bertoloni. 1840 from cuttings and air layering are described, and the results of an experiment to test the effect of two auxins, naphthalene acetic acid (NAA and indole butyric acid (IBA, on adventitious root production in cuttings are presented. In general. C. obtusifolia cuttings respond well to adventitious root production (58.3 % of cuttings survived to root, but air layering was the better method (93 % of cuttings survived to root. The concentration of auxins used resulted in an overall significantly lower quality of roots produced compared with cuttings without auxin treatment. Future experiments using Cecropia could benefit from the use of isogenic plants produced by vegetative propagationCecropia es un género bien conocido y bien estudiado en los Neotrópicos. Se discuten métodos exitosos para la propagación de C. obtusifolia Bertoloni, 1840 de fragmentos de troncos y acodos aéreos. A continuación se presentan los resultados de un experimento para examinar los efectos de dos tipos de hormonas (NAA e IBA en la producción de raíces adventicias en fragmentos de troncos. En general, los fragmentos de C. abtusifalia responden bien en la producción de raíces adventicias (y sobreviven al azar 58.3% de los cortes, pero el método de acodos aéreos funcionó mejor (sobreviven al azar 93 %. El uso de hormonas resultó en raíces de baja calidad en comparación con cortes sin hormonas. Experimentos en el futuro que usan Cecropia pueden beneficiar al usar plantas isogénicas producidas por propagación vegetativa

Antibiotic resistance profile and RAPD analysis of Campylobacter jejuni isolated from vegetables farms and retail markets

Directory of Open Access Journals (Sweden)

John Yew Huat Tang

2016-01-01

Conclusions: C. jejuni contamination in vegetables at retail markets was due to cross contamination. Current finding proved that C. jejuni in small scale vegetables production was less expose towards antibiotic abuse.

Different Disinfectants Efficiency of Fruits and Vegetables Available in Market of

Directory of Open Access Journals (Sweden)

Abdollah Dargahi

2013-11-01

Full Text Available The fruits and vegetables are carrier microbial flora and in every stage of production, transportation, packaging, storage and sale to consumers are exposed to microbial contamination. Raw fruits and vegetables are suitable place for growing a variety of parasites and bacteria such as Shigella, Pseudomonas aeruginosa and Campylobacter that many of theirs can cause epidemic if the conditions have provide.

Differential diagnosis of neuroses and vegetative dystonias among medical personnel exposed to chronic effect of occupational low dose irradiation. Part 2

International Nuclear Information System (INIS)

Jonkova, A.

1987-01-01

An ttempt to differentiate the importance of radiation factor in the origination of functional changes in nervous activity is made. Clinical methods are applied to 456 madical workers occupationally exposed to ionizing radiation as well as to a control group of 300 medical workers. 100 subjects from each group have been investigated by inquiry psychological methods. No dependence is established between the incidence of neurasthenic neuroses and the duration of service, the cumulative equivalent doses respectively, being within the range of 25 mSv - 1.6 Sv. Asthenic states of the nervous system, not included in the clinical picture of neuroses and other diseases, have not been diagnosed. The significantly higher incidence of vegetative dystonias among the female medical personnel, working with sources and environment of ionizing radiation with a length of service over 15 years, is discussed in causal relationship with the radiation factor. 4 tabs., 15 refs

Manual herbicide application methods for managing vegetation in Appalachian hardwood forests

Science.gov (United States)

Jeffrey D. Kochenderfer; James N. Kochenderfer; Gary W. Miller

2012-01-01

Four manual herbicide application methods are described for use in Appalachian hardwood forests. Stem injection, basal spray, cut-stump, and foliar spray techniques can be used to control interfering vegetation and promote the development of desirable reproduction and valuable crop trees in hardwood forests. Guidelines are presented to help the user select the...

Monitoring the vegetation recovery in Østerild Plantage 2013. Part 1

DEFF Research Database (Denmark)

Wind, Peter

The trees in a part of Østerild Plantage have been cut down to give room for a national test center. Before the afforestation DCE has performed a baseline monitoring in the summer of 2011. DCE has in late summer 2013 re-monitored the recovery of the vegetation cover in the northernmost part...

Dependence of plant biometrics of cutting lettuce (Lactuca sativa L. varietis on the concentration of microfertilizer Avatar-1

Directory of Open Access Journals (Sweden)

В. Б. Кутовенко

2017-09-01

Full Text Available Purpose. To investigate the variability of plant biometrics of cutting lettuce (Lactuca sativa L. varieties depending on the concentration of microfertilizer Avatar-1. Methods. Field study, biometric technique, comparative approach, statistical evaluation, generalization. Results. Dependence of the plant height, the diameter of the leaf rosette, the number of leaves per plant, the leaf area of plants on the concentration of microfertilizer Avatar-1 was defined. Investigations of cutting lettuce ‘Afitsyon’ and ‘Concord’ varieties by Dutch breeding were conducted in 2016–2017 in the collection sites of the department of vegetable growing in the scientific-experimental field  “Fruit and vegetable garden” of the National University of Life and Environmental Sciences of Ukraine. In order to determine dependence of plant biometrics of cutting lettuce varieties on the concentration of complex microfertilizer Avatar-1, the following scheme was used for the both varieties: variant 1 – water (control; variant 2 – 0,10% solution; variant 3 – 0,25% solution; variant 4 – 0,50% solution. Plants were treated with microfertilizer three times during the vegetative period. Alterations of plant biometrics of cutting lettuce ‘Afitsyon’ and ‘Concord’ varieties  depending on the concentration of complex microfertilizer Avatar-1 was studied. Conclusions. It was found that in case of three-time plant treatment with complex microfertilizer Avatar-1 at the time of harvesting, the best plant biometrics was registered in variant 3 (concentration 0,25% for the both ‘Afitsyon’ and ‘Concord’ varie­ties of cutting lettuce. The height of plants of the cutting lettuce in ‘Afitsyon’ variety exceeded this figure in ‘Concord variety by 1,1–1,4 cm. The concentration of microfertilizer had no significant effect on the diameter of the leaf rosette of ‘Concord’ variety (25,1–25,9 см. The diame­ter of the leaf rosette of �

Innovative approach for restoring coastal wetlands using treated drill cuttings

International Nuclear Information System (INIS)

Veil, J. A.; Hocking, E. K.

1999-01-01

The leading environmental problem facing coastal Louisiana regions is the loss of wetlands. Oil and gas exploration and production activities have contributed to wetland damage through erosion at numerous sites where canals have been cut through the marsh to access drilling sites. An independent oil and gas producer, working with Southeastern Louisiana University and two oil field service companies, developed a process to stabilize drill cuttings so that they could be used as a substrate to grow wetlands vegetation. The U.S. Department of Energy (DOE) funded a project under which the process would be validated through laboratory studies and field demonstrations. The laboratory studies demonstrated that treated drill cuttings support the growth of wetlands vegetation. However, neither the Army Corps of Engineers (COE) nor the U.S. Environmental Protection Agency (EPA) would grant regulatory approval for afield trial of the process. Argonne National Laboratory was asked to join the project team to try to find alternative mechanisms for gaining regulatory approval. Argonne worked with EPA's Office of Reinvention and learned that EPA's Project XL would be the only regulatory program under which the proposed field trial could be done. One of the main criteria for an acceptable Project XL proposal is to have a formal project sponsor assume the responsibility and liability for the project. Because the proposed project involved access to private land areas, the team felt that an oil and gas company with coastal Louisiana land holdings would need to serve as sponsor. Despite extensive communication with oil and gas companies and industry associations, the project team was unable to find any organization willing to serve as sponsor. In September 1999, the Project XL proposal was withdrawn and the project was canceled

Fibre laser cutting stainless steel: Fluid dynamics and cut front morphology

Science.gov (United States)

Pocorni, Jetro; Powell, John; Deichsel, Eckard; Frostevarg, Jan; Kaplan, Alexander F. H.

2017-01-01

In this paper the morphology of the laser cut front generated by fibre lasers was investigated by observation of the 'frozen' cut front, additionally high speed imaging (HSI) was employed to study the fluid dynamics on the cut front while cutting. During laser cutting the morphology and flow properties of the melt film on the cut front affect cut quality parameters such as cut edge roughness and dross (residual melt attached to the bottom of the cut edge). HSI observation of melt flow down a laser cutting front using standard cutting parameters is experimentally problematic because the cut front is narrow and surrounded by the kerf walls. To compensate for this, artificial parameters are usually chosen to obtain wide cut fronts which are unrepresentative of the actual industrial process. This paper presents a new experimental cutting geometry which permits HSI of the laser cut front using standard, commercial parameters. These results suggest that the cut front produced when cutting medium section (10 mm thick) stainless steel with a fibre laser and a nitrogen assist gas is covered in humps which themselves are covered by a thin layer of liquid. HSI observation and theoretical analysis reveal that under these conditions the humps move down the cut front at an average speed of approximately 0.4 m/s while the covering liquid flows at an average speed of approximately 1.1 m/s, with an average melt depth at the bottom of the cut zone of approximately 0.17 mm.

FRUIT JUICES AS AN ALTERNATIVE TECHNIQUE FOR CONSERVATION OF FRESH-CUT BANANA

Directory of Open Access Journals (Sweden)

ANDERSON ADRIANO MARTINS MELO

2014-01-01

Full Text Available Browning discoloration after cutting is detrimental for the quality of a number of fruits and vegetables, such as banana, apple, pear, potato, and some roots such as cassava, yam, and others. Browning and softening compromise banana after cut shelf-life in a few hours under cold storage. Therefore, anti-browning compounds have been applied to slices before packing. Some commonly used substances are calcium chloride, ascorbic acid, cysteine and citric acid, in immersed inchemical mixtures. Recent studies have demonstrated the possibility of preserving fresh-cut banana immersed in sweetened fruit juice for relatively longer periods, favoring commercialization. This type of conservation, although widely used in Brazil for fruit salads, consists of a more complex system in a physiological basis, requiring adjustment of the solution parameters, such as sugar concentration, pH and acidity, considering the viability and freshness of the plant tissue. In this short review, we discuss some experimental data and present a new method for preserving fresh-cut banana. Reduction of enzymatic activity, either in temporary dipping treatment or permanent immersion of banana slices is regarded as a key factor for maintaining its quality during cold storage.

The technology of fish-vegetable feed production

Directory of Open Access Journals (Sweden)

Mukatova M. D.

2016-09-01

Full Text Available Perspective direction of the Volga-Caspian basin fisheries is increasing the productivity of aquaculture production which requires the availability of sufficient quantities of feed. The cutting waste of carp and crucian carp, crayfish processing (cephalothorax, wheat bran, soy isolate, freshwater plants – pondweed perfoliate, fish-vegetable ration, produced feeding staffs have been investigated. In researching samples of manufactured pelleted feeds the standard methods adopted in the animal feed industry have been used. The number of nitrogen-free extractives and energy value has been determined by calculation. The composition of fish-vegetable ration has been worked out. Some manufacturing inspection of fish-vegetable feed technology using proofing process has been carried out. The possibility of manufacturing on the basis of crushed fish waste of the company LLC "VES" and dry ingredients of fish-vegetable feed has been determined; the output of feed at water content of not more than 10 % is 43 % of feed mix based on the mass of directed waste equal to 84 %. The pilot batch of dry fish-vegetable feed has been investigated to establish quality indicators. It has been determined that fish-vegetable feed meets the requirements of GOST 10385–2014 "Combined feeding staffs for fishes. General specifications" as for main quality indicators and refers to economic grower for catfish and carp fish weighing more than 50 g. This reveals good palatability of the experimental batch of floating feed by carp fish species and African catfish. Thus, fish-vegetable feed manufacturing technology can be implemented in the production for processing secondary raw materials: waste from butchering fish by grinding, cooking, mixing with selected vegetable fillings which is waste of flour or grain processing industries and freshwater plants mowed annually during the reclamation works on the Volga delta.

Inactivation of Escherichia coli inoculated onto fresh-cut chopped cabbage using electron-beam processing.

Science.gov (United States)

Grasso, Elizabeth M; Uribe-Rendon, Roberto M; Lee, Ken

2011-01-01

During the past decade there were more than 50 reported outbreaks involving leafy green vegetables contaminated with foodborne pathogens. Leafy greens, including cabbage, are fresh foods rarely heated before consumption, which enables foodborne illness. The need for improved safety of fresh food drives the demand for nonthermal food processes to decrease the risk of pathogens while maintaining fresh quality. This study examines the efficacy of electron-beam (e-beam) irradiation in decreasing indigenous microflora on fresh-cut cabbage and determines the optimal dosage to pasteurize fresh-cut cabbage inoculated with Escherichia coli K-12. Fresh-cut cabbage (100 g) was inoculated with ∼8 log E. coli K-12 and e-beam irradiated at doses of 0, 1.0, 2.3, or 4.0 kGy. At 2.3 kGy there was 7-log reduction of E. coli K-12 in the fresh-cut cabbage. The D(10)-value for E. coli K-12 in fresh-cut cabbage was 0.564 kGy. E-beam irradiation is thus a viable nonthermal treatment that extends the shelf life and increases the safety of fresh cabbage by reducing or eliminating indigenous microflora and unwanted pathogens.

Water dynamics of vegetable using radiation

International Nuclear Information System (INIS)

Nakanishi, Tomoko

2000-01-01

Neutral ray is specifically adsorbed and scattered by hydrogen, which is construction element of water. We applied nondestructive visualization of water dynamics in vegetable using neutral ray. The neutron ray was produced by JRR-3M of JAERI. Water dynamics of epigeal part of vegetable, tree, seed, root and soil near root were observed. The distribution and behavior of water were seen by image. For examples, the dry process of cedar, water adsorption process of seed of broad beam, corn, morning glory, rice and wheat. The growing process of root in the soil was analyzed by CT images that constructed three-dimensional image. Water image of root-soil system made clear water dynamics of the optional site near root. The distribution of water in the cut carnation was observed before and after dry treatment. The change of distribution of water was observed. (S.Y.)

Technological innovations to preserve quality and safety of fresh-cut horticultural products

OpenAIRE

Artés-Hernández, Francisco; Gómez, Perla; Aguayo, Encarna; Artés-Hernández, Francisco

2010-01-01

Proceedings of the International Conference “Environmentally friendly and safe technologies for quality of fruit and vegetables”, held in Universidade do Algarve, Faro, Portugal, on January 14-16, 2009. This Conference was a join activity with COST Action 924. Fresh-cut or minimally processed fruit and vegetables have strongly increased their market share all over the industrialized countries. For that reason this market is currently very competitive, and forces the specialized ...

Cutting state identification

International Nuclear Information System (INIS)

Berger, B.S.; Minis, I.; Rokni, M.

1997-01-01

Cutting states associated with the orthogonal cutting of stiff cylinders are identified through an analysis of the singular values of a Toeplitz matrix of third order cumulants of acceleration measurements. The ratio of the two pairs of largest singular values is shown to differentiate between light cutting, medium cutting, pre-chatter and chatter states. Sequences of cutting experiments were performed in which either depth of cut or turning frequency was varied. Two sequences of experiments with variable turning frequency and five with variable depth of cut, 42 cutting experiments in all, provided a database for the calculation of third order cumulants. Ratios of singular values of cumulant matrices find application in the analysis of control of orthogonal cutting

Analytical and Mathematical Determination of Shelf-life of Fresh-cut Red Cabbage

Directory of Open Access Journals (Sweden)

Fulya Şimşek

2017-04-01

Full Text Available Fresh-cut fruits and vegetables have longer shelf lives when appropriate packaging materials having proper permeability properties are used. For this reason eight different packaging materials having different permeability properties were used and it was aimed to determine the appropriate packaging material and analytical and mathematical shelf lives of fresh cut red cabbage. Head space analysis, microbiological and sensorial analysis together with pH, weight loss (% and colour analysis were performed. As a result of the study, it was determined that low density polyethylene (LDPE film having 20 µm of thickness and 12276 cc/m2-day of oxygen permeability was determined as the most suitable packaging material for packaging of fresh-cut red cabbage. Mathematical microbiological shelf life was determined as 12.33 days and both analytical microbiological and sensorial shelf lives were determined as 12 days. It was shown that Gompertz equation can be used in determination of microbiological shelf life of fresh-cut red cabbage since the analytical and mathematical shelf life results fit to each other. Also, the equation that can be used in calculation of shelf life of fresh-cut red cabbage when packaged with AYPE film having 12276 cc/m2-day oxygen permeability was determined as log(Nt/N0 = 6,83 × exp{-exp{[(0,80*e(6,83-t/6,83]+1}}.

Plasma cutting or laser cutting. Plasma setsudan ka laser setsudan ka

Energy Technology Data Exchange (ETDEWEB)

Nakamura, A. (Tanaka Engineering Works Ltd., Saitama (Japan))

1991-05-01

Comparisons and discussions were made on the plasma cutting and laser cutting in sheet steel cutting, referring partly to gas cutting. Historically, the cutting has been developed from gas, plasma, and laser in that order, and currently these three methods are used mixedly. Generally, the plasma cutting is superior in cutting speed, but inferior in cut face quality, and it requires measures of dust collection. Due to high accuracy and quality in cut face, the laser cutting has been practically used for quite some time in the thin sheet industry, but medium to thick sheet cutting had a problem of unavailability of high output laser suitable for these ranges. However, the recent technologies have overcome the problem as a result of development at the authors {prime} company of a 2 kW class laser cutter capable of cutting 19 mm thick sheet. The cutter has been proven being particularly excellent in controllability. Choice of whether plasma or laser would depend upon which priority is to be taken, cost or accuracy. 15 figs., 3 tabs.

Freeze Drying of Fruits and Vegetables: A Laboratory Experiment.

Science.gov (United States)

Noble, Richard D.

1979-01-01

Describes a laboratory experiment for freeze-drying fruits and vegetables which aims to expose college students to the principles of drying and simultaneous heat and mass transfer. The experimental apparatus, procedure of the experiment, and data analysis are also included. (HM)

Growth response of Casuarina equisetifolia Forst. rooted stem cuttings to Frankia in nursery and field conditions.

Science.gov (United States)

Karthikeyan, A; Chandrasekaran, K; Geetha, M; Kalaiselvi, R

2013-11-01

Casuarina equisetifolia Forst. is a tree crop that provides fuel wood, land reclamation, dune stabilization, and scaffolding for construction, shelter belts, and pulp and paper production. C. equisetifolia fixes atmospheric nitrogen through a symbiotic relationship with Frankia, a soil bacterium of the actinobacteria group. The roots of C. equisetifolia produce root nodules where the bacteria fix atmospheric nitrogen, which is an essential nutrient for all plant metabolic activities. However, rooted stem cuttings of elite clones of C. equisetifolia by vegetative propagation is being planted by the farmers of Pondicherry as costeffective method. As the vegetative propagation method uses inert material (vermiculite) for rooting there is no chance for Frankia association. Therefore after planting of these stocks the farmers are applying 150 kg of di-ammonium phosphate (DAP)/acre/year. To overcome this fertilizer usage, the Frankia-inoculated rooted stem cuttings were propagated under nursery conditions and transplanted in the nutrient-deficient soils of Karaikal, Pondicherry (India), in this study. Under nursery experiments the growth and biomass of C. equisetifolia rooted stem cuttings inoculated with Frankia showed 3 times higher growth and biomass than uninoculated control. These stocks were transplanted and monitored for their growth and survival for 1 year in the nutrient-deficient farm land. The results showed that the rooted stem cuttings of C. equisetifolia significantly improved growth in height (8.8 m), stem girth (9.6 cm) and tissue nitrogen content (3.3 mg g-1) than uninoculated controls. The soil nutrient status was also improved due to inoculation of Frankia.

Wedge cutting of mild steel by CO 2 laser and cut-quality assessment in relation to normal cutting

Science.gov (United States)

Yilbas, B. S.; Karatas, C.; Uslan, I.; Keles, O.; Usta, Y.; Yilbas, Z.; Ahsan, M.

2008-10-01

In some applications, laser cutting of wedge surfaces cannot be avoided in sheet metal processing and the quality of the end product defines the applicability of the laser-cutting process in such situations. In the present study, CO 2 laser cutting of the wedge surfaces as well as normal surfaces (normal to laser beam axis) is considered and the end product quality is assessed using the international standards for thermal cutting. The cut surfaces are examined by the optical microscopy and geometric features of the cut edges such as out of flatness and dross height are measured from the micrographs. A neural network is introduced to classify the striation patterns of the cut surfaces. It is found that the dross height and out of flatness are influenced significantly by the laser output power, particularly for wedge-cutting situation. Moreover, the cut quality improves at certain value of the laser power intensity.

Prevalence and level of Listeria monocytogenes and other Listeria sp. in ready-to-eat minimally processed and refrigerated vegetables.

Science.gov (United States)

Kovačević, Mira; Burazin, Jelena; Pavlović, Hrvoje; Kopjar, Mirela; Piližota, Vlasta

2013-04-01

Minimally processed and refrigerated vegetables can be contaminated with Listeria species bacteria including Listeria monocytogenes due to extensive handling during processing or by cross contamination from the processing environment. The objective of this study was to examine the microbiological quality of ready-to-eat minimally processed and refrigerated vegetables from supermarkets in Osijek, Croatia. 100 samples of ready-to-eat vegetables collected from different supermarkets in Osijek, Croatia, were analyzed for presence of Listeria species and Listeria monocytogenes. The collected samples were cut iceberg lettuces (24 samples), other leafy vegetables (11 samples), delicatessen salads (23 samples), cabbage salads (19 samples), salads from mixed (17 samples) and root vegetables (6 samples). Listeria species was found in 20 samples (20 %) and Listeria monocytogenes was detected in only 1 sample (1 %) of cut red cabbage (less than 100 CFU/g). According to Croatian and EU microbiological criteria these results are satisfactory. However, the presence of Listeria species and Listeria monocytogenes indicates poor hygiene quality. The study showed that these products are often improperly labeled, since 24 % of analyzed samples lacked information about shelf life, and 60 % of samples lacked information about storage conditions. With regard to these facts, cold chain abruption with extended use after expiration date is a probable scenario. Therefore, the microbiological risk for consumers of ready-to-eat minimally processed and refrigerated vegetables is not completely eliminated.

A cutting fluid

Energy Technology Data Exchange (ETDEWEB)

Kajdas, C.; Dominiak, M.; Kozinski, R.; Misterkiewicz, B.; Polowniak, J.; Szczepaniak, S.

1982-06-30

The cutting fluid (SOZh) contains 0.5 to 10 percent vegetable or animal fats, selectively sulfurized in the presence of a catalyst (Kt): 0.1 to 10 percent chlorinated C2O to C3O paraffins, which contain 10 to 50 percent Chlorine in a molecule, and 0.001 to 0.5 percent dialkyldithiocarbamic or alkylen-bis-(dithiocarbamic) acids or their salts or derivatives of the form (R(R')NC(S)SRn'', (CH2)n(NHC(S)S)2R'' or R(R')NC(S)SnC(S)(R)R', where R and R' are alkyl or cycloalkyl of the C1 to C6 fractions, R'' is Hydrogen, a metal, or aliphatic or heterocyclic amine, n = 2 to 6 and 0.001 to 0.3 percent of heterocyclic mercaptanes or disulfides of the cited formula, where A is Nitrogen or Sulfur, and up to 100 percent petroleum oil with a kinematic viscosity of 5 to 50 square millimeters per second at 323K.

Towards Detection of Cutting in Hay Meadows by Using of NDVI and EVI Time Series

Directory of Open Access Journals (Sweden)

Andrej Halabuk

2015-05-01

Full Text Available The main requirement for preserving European hay meadows in good condition is through prerequisite cut management. However, monitoring these practices on a larger scale is very difficult. Our study analyses the use of MODIS vegetation indices products, namely EVI and NDVI, to discriminate cut and uncut meadows in Slovakia. We tested the added value of simple transformations of raw data series (seasonal statistics, first difference series, compared EVI and NDVI, and analyzed optimal periods, the number of scenes and the effect of smoothing on classification performance. The first difference series transformation saw substantial improvement in classification results. The best case NDVI series classification yielded overall accuracy of 85% with balanced rates of producer’s and user’s accuracies for both classes. EVI yielded slightly lower values, though not significantly different, although user accuracy of cut meadows achieved only 67%. Optimal periods for discriminating cut and uncut meadows lay between 16 May and 4 August, meaning only seven consecutive images are enough to accurately detect cutting in hay meadows. More importantly, the 16-day compositing period seemed to be enough for detection of cutting, which would be the time span that might be hopefully achieved by upcoming on-board HR sensors (e.g., Sentinel-2.

Measuring multiple residual-stress components using the contour method and multiple cuts

Energy Technology Data Exchange (ETDEWEB)

Prime, Michael B [Los Alamos National Laboratory; Swenson, Hunter [Los Alamos National Laboratory; Pagliaro, Pierluigi [U. PALERMO; Zuccarello, Bernardo [U. PALERMO

2009-01-01

The conventional contour method determines one component of stress over the cross section of a part. The part is cut into two, the contour of the exposed surface is measured, and Bueckner's superposition principle is analytically applied to calculate stresses. In this paper, the contour method is extended to the measurement of multiple stress components by making multiple cuts with subsequent applications of superposition. The theory and limitations are described. The theory is experimentally tested on a 316L stainless steel disk with residual stresses induced by plastically indenting the central portion of the disk. The stress results are validated against independent measurements using neutron diffraction. The theory has implications beyond just multiple cuts. The contour method measurements and calculations for the first cut reveal how the residual stresses have changed throughout the part. Subsequent measurements of partially relaxed stresses by other techniques, such as laboratory x-rays, hole drilling, or neutron or synchrotron diffraction, can be superimposed back to the original state of the body.

L-ascorbic acid losses in Kenyan vegetables during cooking as ...

African Journals Online (AJOL)

The effect of the sharpness of the knife on the loss of L-AA was studied with spinach. It was found that more loss of L-AA occurred when a blunt (edge thickness 0.08 cm) knife was used for cutting the vegetables than when a sharp knife (edge thickness 0.04 cm) was used during cooking. L-AA was also determined when ...

Using management to address vegetation stress related to land-use and climate change

Science.gov (United States)

Middleton, Beth A.; Boudell, Jere; Fisichelli, Nicholas

2017-01-01

While disturbances such as fire, cutting, and grazing can be an important part of the conservation of natural lands, some adjustments to management designed to mimic natural disturbance may be necessary with ongoing and projected climate change. Stressed vegetation that is incapable of regeneration will be difficult to maintain if adults are experiencing mortality, and/or if their early life-history stages depend on disturbance. A variety of active management strategies employing disturbance are suggested, including resisting, accommodating, or directing vegetation change by manipulating management intensity and frequency. Particularly if land-use change is the main cause of vegetation stress, amelioration of these problems using management may help vegetation resist change (e.g. strategic timing of water release if a water control structure is available). Managers could direct succession by using management to push vegetation toward a new state. Despite the historical effects of management, some vegetation change will not be controllable as climates shift, and managers may have to accept some of these changes. Nevertheless, proactive measures may help managers achieve important conservation goals in the future.

Comparison of vitamin losses in vegetables due to various cooking methods.

Science.gov (United States)

Rumm-Kreuter, D; Demmel, I

1990-01-01

Preparing vegetables with heat the contents of their constituents will change to a various extent. Particularly the water-soluble and the heat-sensitive vitamins are affected. At an early stage the vitamin C losses were investigated, because of vitamin C's indicating function for oxidation and leaching-out processes (1, 2, 7, 11-13, 15, 17). The degree of vitamin losses is influenced by various factors, for example the type of food, variety of vegetables, the way of cutting, preparation, duration and method of cooking. The influence of the various cooking methods with regard to the losses of certain water-soluble vitamins will be discussed.

Do sun- versus shade-grown kiwifruits perform differently upon storage? An overview of fruit maturity and nutraceutical properties of whole and fresh-cut produce.

Science.gov (United States)

Landi, Marco; Tardelli, Francesca; Remorini, Damiano; Massai, Rossano; Guidi, Lucia

2014-05-14

Fresh-cut produce represents a good method to save about 25% of the kiwifruit not useful to meet the fresh fruit-marketing standard due to improper size and shape. For that reason, fresh-cut kiwifruit has been extensively studied. However, the comprehension of the influence of some aspects of cultivation might further increase the shelf life as well as the nutritional values of that fruit. This study explored the hypothesis that kiwifruits grown fully exposed to sunlight or partially shaded differently perform upon storage as whole fruit and as minimally processed produce. Flesh firmness (FF), total solids soluble (SSC), ascorbate (AAT), flavonoids (TFO), and phenols (TF) contents were evaluated in sliced and whole fruit upon 3 days of storage at 4 °C after 75 days of cold chamber storage at 0 °C. The activities of two enzymes related to the softening process, polygalacturonase (PG) and pectinmethylesterase (PME), were evaluated as well. FF and SSC were constitutively higher in sun-exposed fruit, and those characteristics remained higher during the storage as whole fruit. Greater constitutive content of AAT, TFO, and TP was found in sun-exposed whole fruit, although after cutting the reduction in their content was significantly lower in shaded fruits. PME and PG activities were higher only in whole shaded fruits, whereas no relevant differences occurred after cutting. In summary, sun-exposed fruits were more suitable for the fresh-fruit market, whereas the shaded counterpart displayed a good predisposition for use as fresh-cut produce, maintaining similar fruit maturity properties but higher nutraceutical values when sliced than fruit grown under full sun.

Non-Conventional Tools to Preserve and Prolong the Quality of Minimally-Processed Fruits and Vegetables

Directory of Open Access Journals (Sweden)

Maria Rosaria Corbo

2015-11-01

Full Text Available The main topic of this paper is a focus on some non-conventional tools to preserve the microbiological and physico-chemical quality of fresh-cut fruits and vegetables. The quality of fresh-cut foods is the result of a complex equilibrium involving surface microbiota, storage temperature, gas in the headspace and the use of antimicrobials. This paper proposes a short overview of some non-conventional approaches able to preserve the quality of this kind of product, with a special focus on some new ways, as follows: (1 use of edible or antimicrobial-containing coatings (e.g., chitosan-based coatings on fruits or vegetables; (2 alternative modified atmospheres (e.g., high O2-modified atmosphere packaging (MAP or the use of essential oils in the headspace; (3 conditioning solutions with antimicrobials or natural compounds for fruit salad; and (4 biopreservation and use of a probiotic coating.

Occurrence and genetic characterization of Listeria spp. in minimally processed vegetables commercialized in Porto Alegre, Brazil

OpenAIRE

Verdin, Sylvia Elisa Frizzo; Silva, Silvia Regina Pavan da; Pereira, Dariane Castro; Schatkoski, Aline Modelski; Corção, Gertrudes

2007-01-01

Minimally processed vegetables go through many steps before they are refrigerated, selection, washing, peeling, cutting, disinfection and finally packaging. However, if no care is taken at the origin of the raw materials and in the processing stages, there is a chance of finding pathogenic bacteria, such as Listeria monocytogenes, which are able to grow at low temperatures. The aim of this research was to verify the occurrence of Listeria sp. in minimally processed vegetables sold in Porto Al...

Cutting forces during turning with variable depth of cut

Directory of Open Access Journals (Sweden)

M. Sadílek

2016-03-01

The proposed research for the paper is an experimental work – measuring cutting forces and monitoring of the tool wear on the cutting edge. It compares the turning where standard roughing cycle is used and the turning where the proposed roughing cycle with variable depth of cut is applied.

Tissue Printing to Visualize Polyphenol Oxidase and Peroxidase in Vegetables, Fruits, and Mushrooms

Science.gov (United States)

Melberg, Amanda R.; Flurkey, William H.; Inlow, Jennifer K.

2009-01-01

A simple tissue-printing procedure to determine the tissue location of the endogenous enzymes polyphenol oxidase and peroxidase in a variety of vegetables, fruits, and mushrooms is described. In tissue printing, cell contents from the surface of a cut section of the tissue are transferred to an adsorptive surface, commonly a nitrocellulose…

Simulating vegetation dynamics in Chile from 21ka BP to present: Effects of climate change on vegetation functions and cover

Science.gov (United States)

Werner, Christian; Liakka, Johan; Schmid, Manuel; Fuentes, Juan-Pablo; Ehlers, Todd A.; Hickler, Thomas

2017-04-01

Vegetation composition and establishment is strongly dependent on climate conditions but also a result of vegetation dynamics (competition for light, water and nutrients). In addition, vegetation exerts control over the development of landscapes as it mediates the climatic and hydrological forces shaping the terrain via hillslope and fluvial processes. At the same time, topography as well as soil texture and soil depth affect the microclimate, soil water storage and rooting space that is defining the environmental envelope for vegetation development. Within the EarthShape research program (www.earthshape.net) we evaluate these interactions by simulating the co-evolution of landscape and vegetation with a dynamic vegetation model (LPJ-GUESS) and a landscape evolution model (LandLab). LPJ-GUESS is a mechanistic model driven by daily or monthly weather data and explicitly simulates vegetation physiology, succession, competition and water and nutrient cycling. Here we present the results of first transient vegetation simulations from 21kyr BP to present-day using the TraCE-21ka climate dataset for four focus sites along the coastal cordillera of Chile that are exposed to a substantial meridional climate gradient (ranging from hyper-arid to humid-temperate conditions). We show that the warming occurring in the region from LGM to present, in addition to the increase of atmospheric CO2 concentrations, led to a shift in vegetation composition and surface cover. Future work will show how these changes resonate in the dynamics of hillslope and fluvial erosion and ultimately bi-directional feedback mechanisms of vegetation development and landscape evolution/ soil formation (see also companion presentation by Schmid et al., this session).

Response of vegetable pads of two cactus cultivars to the presence of Salmonella strains

Science.gov (United States)

Tender cactus pads (cladodes) or nopalitos (Opuntia ficus-indica L) are an important vegetable in Mexico. They are often pre-trimmed, cut and packaged, and while usually consumed cooked, they may also be eaten raw in salads. Salmonella is an enteropathogenic bacterium that can adapt to adverse envir...

Cutting method and cutting device for spent fuel rod of nuclear reactor

International Nuclear Information System (INIS)

Komatsu, Masahiko; Ose, Toshihiko.

1996-01-01

A control rod transferred under water in a vertically suspended state is postured horizontally at such a water depth that radiations can be shielded, and then it is cut to a dropping speed limiting portion and a cross-like main body. The separated cross-like main body portion is further cut in the longitudinal direction and separated into a pair of cut pieces each having an L-shaped cross section. A disk like metal saw is used as a cutting tool. Alternatively, a plasma jet cutter or a melting-type water jet cutter is used as a cutting tool. Then, since the spent control rod to be cut is postured horizontally under water, the water depth for the cutting position can be reduced. As a result, the cutting state using the cutting tool can be observed by naked eyes from the position above the water surface thereby enabling to perform the cutting operation reliably. (N.H.)

Recent Advances in the Emission and Functions of Plant Vegetative Volatiles

Directory of Open Access Journals (Sweden)

Fang Dong

2016-01-01

Full Text Available Plants synthesize and emit a large variety of volatile organic compounds, which possess extremely important ecological functions. In most case, most plant volatiles are liquids, rather than gases, at room temperature. Some volatiles are emitted “on demand” when plants, especially vegetative parts, are exposed to abiotic or biotic stress. In this review, we summarize some of the highlights of plant vegetative volatile emission and functions research published during the past few years.

Stem Photosynthesis of Twig and Its Contribution to New Organ Development in Cutting Seedlings of Salix Matsudana Koidz.

Directory of Open Access Journals (Sweden)

Junxiang Liu

2018-04-01

Full Text Available The objective of this study was to illustrate the photosynthetic characteristics of current twigs of Salix matsudana Koidz., and clarify the effect of stem photosynthesis on the new organ development in cutting seedlings. Excised twigs were taken as the experimental samples. The response of the stem photosynthesis rate to increasing light intensity and the effective photochemical efficiency of the cross section of the twig were determined. Then, twigs were used as cuttings and exposed to 0, 20, and 100 μmol m−2 s−1 light intensities, respectively, to achieve distinctive stem photosynthetic rates. After 14 days of treatment, stem water and non-structural carbohydrate (NSC content, as well as the biomass and carbon isotopic composition, of new organs in the cutting seedlings under different light treatments were examined. The results showed that the gross photosynthetic rate significantly increased within 400 μmol m−2 s−1 of light intensity, and the maximum rate was approximately 1.27 μmol m−2 s−1. The effective photochemical efficiency of the PSⅡ of the cortex was significantly higher than the inner tissues in the cross section of the twig. When twig cuttings were exposed to different light intensities, stem water and starch content, as well as bud and root biomass, were significantly higher in the cutting seedling subjected to 100 μmol m−2 s−1 than the case treated in darkness; however, the bud δ13C trend was the opposite. Stem photosynthesis played a positive role in the maintenance of stem water and starch supply for the cutting seedlings, and 13C depleted assimilates produced by stem photosynthesis contributed to bud biomass, revealing that stem photosynthesis promotes organ development in cutting seedlings of Salix matsudana.

Formation of trichloromethane in chlorinated water and fresh-cut produce and as a result of reacting with citric acid

Science.gov (United States)

Chlorine (sodium hypochlorite) is commonly used by the fresh produce industry to sanitize wash water, fresh and fresh-cut fruits and vegetables. However, possible formation of harmful chlorine by-products is a concern. The objectives of this study were to compare chlorine and chlorine dioxide in t...

Flexible Laser Metal Cutting

DEFF Research Database (Denmark)

Villumsen, Sigurd; Jørgensen, Steffen Nordahl; Kristiansen, Morten

2014-01-01

This paper describes a new flexible and fast approach to laser cutting called ROBOCUT. Combined with CAD/CAM technology, laser cutting of metal provides the flexibility to perform one-of-a-kind cutting and hereby realises mass production of customised products. Today’s laser cutting techniques...... possess, despite their wide use in industry, limitations regarding speed and geometry. Research trends point towards remote laser cutting techniques which can improve speed and geometrical freedom and hereby the competitiveness of laser cutting compared to fixed-tool-based cutting technology...... such as punching. This paper presents the concepts and preliminary test results of the ROBOCUT laser cutting technology, a technology which potentially can revolutionise laser cutting....

Up-regulation of cytochrome P450 and phase II enzyme systems in rat precision-cut rat lung slices by the intact glucosinolates, glucoraphanin and glucoerucin.

Science.gov (United States)

Abdull Razis, Ahmad Faizal; Bagatta, Manuela; De Nicola, Gina Rosalinda; Iori, Renato; Ioannides, Costas

2011-03-01

It is believed that the chemopreventive activity of cruciferous vegetables in the lung and other tissues is exclusively the result of exposure to degradation products of glucosinolates, such as the isothiocyanates, and that the parent glucosinolates make no contribution. In the present study, evidence is presented for the first time that, in rat lung, the intact glucosinolates, glucoraphanin and glucoerucin, can modulate carcinogen-metabolising enzyme systems. The glucosinolates were isolated from cruciferous vegetables and incubated (1-25 μM) with precision-cut rat lung slices for 24h. Both glucosinolates, at concentrations as low as 1 μM, up-regulated the O-deethylation of ethoxyresorufin and the apoprotein levels of CYP1A1 and CYP1B1; supplementation of the incubation medium with myrosinase, the enzyme that converts glucosinolates to their corresponding isothiocyanates, abolished the rise in ethoxyresorufin O-deethylase activity. In contrast, neither glucosinolate, at the concentrations studied, influenced quinone reductase activity in the lung slices, but addition of myrosinase to the glucosinolate incubations led to a marked rise in activity. Glutathione S-transferase activity, monitored using 1-chloro-2,4-dinitrobenzene as the accepting substrate, was elevated in lung slices exposed to glucoraphanin. GSTα protein levels were increased by glucoraphanin and, to a much lesser extent, glucoerucin. It may be concluded that intact glucosinolates can modulate the activity of pulmonary carcinogen-metabolising enzyme systems, and can thus contribute to the documented chemopreventive activity of cruciferous vegetables in the lung. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Heavy metal absorption by vegetables grown in different soils

International Nuclear Information System (INIS)

Canova, F.; Riolfatti, M.; Ravazzolo, E.; Da Ros, D.; Brigato, L.

1995-01-01

The authors study the bibliographic and experimental data on absorption by vegetables of several heavy metals present in the soil or brought to it via fertilizations, especially with the use of compost coming from waste treatment plants. The presence of heavy metals in the soil causes increased levels of these toxic substances in the edible parts of the vegetables grown in that soil. Not to be neglected is also the absorption by the leaf apparatus of airborne particulate containing heavy metals which deposit on the parts of the vegetable exposed to the air. The available data lack homogeneity of investigation as they have been draw from studies which followed different methodologies. Therefore further studies are required in order to: eliminate some of the variables that might affect the absorption of metals from the soil and supply comparable data. Moreover, a greater number of vegetable species and their different edible parts will have to be taken into consideration

Some possibilities for determining cutting data when using laser cutting:

OpenAIRE

Radovanović, Miroslav

2006-01-01

The technological problems faced in the field of the application of laser-cutting machines lie in insufficient knowledge of the laser technique and the absence of both sufficiently reliable practical data and knowledge about the parameters affecting the work process itself. A significant parameter that is necessary to determine and to enter in an NC-program is the cutting speed. Various authors analyze the laser-cutting process and give mathematical models where laser cutting is modeled by us...

Optimizing selective cutting strategies for maximum carbon stocks and yield of Moso bamboo forest using BIOME-BGC model.

Science.gov (United States)

Mao, Fangjie; Zhou, Guomo; Li, Pingheng; Du, Huaqiang; Xu, Xiaojun; Shi, Yongjun; Mo, Lufeng; Zhou, Yufeng; Tu, Guoqing

2017-04-15

The selective cutting method currently used in Moso bamboo forests has resulted in a reduction of stand productivity and carbon sequestration capacity. Given the time and labor expense involved in addressing this problem manually, simulation using an ecosystem model is the most suitable approach. The BIOME-BGC model was improved to suit managed Moso bamboo forests, which was adapted to include age structure, specific ecological processes and management measures of Moso bamboo forest. A field selective cutting experiment was done in nine plots with three cutting intensities (high-intensity, moderate-intensity and low-intensity) during 2010-2013, and biomass of these plots was measured for model validation. Then four selective cutting scenarios were simulated by the improved BIOME-BGC model to optimize the selective cutting timings, intervals, retained ages and intensities. The improved model matched the observed aboveground carbon density and yield of different plots, with a range of relative error from 9.83% to 15.74%. The results of different selective cutting scenarios suggested that the optimal selective cutting measure should be cutting 30% culms of age 6, 80% culms of age 7, and all culms thereafter (above age 8) in winter every other year. The vegetation carbon density and harvested carbon density of this selective cutting method can increase by 74.63% and 21.5%, respectively, compared with the current selective cutting measure. The optimized selective cutting measure developed in this study can significantly promote carbon density, yield, and carbon sink capacity in Moso bamboo forests. Copyright © 2017 Elsevier Ltd. All rights reserved.

Variation in spread of Heterobasidion annosum in clones of Picea abies grown at different vegetation phases under greenhouse conditions

Energy Technology Data Exchange (ETDEWEB)

Svedjemark, G.; Stenlid, J. [Swedish Univ. of Agricultural Sciences, Uppsala (Sweden). Dept. of Forest Mycology and Pathology

1996-06-01

Forty-nine Picea abies (L.) Karst clones were inoculated under greenhouse conditions with a Heterobasidion annosum (Fr.) Bref. isolate of the S intersterility group. The cuttings were inoculated at the following vegetation stages; bud-flushing stage, vegetative stage and after bud-set. Fungal growth in sapwood and leison length in the inner bark were measured after 34 days. The susceptibility of the various clones to H. annosum was strongly correlated among the three vegetation stages, both in terms of mean growth and mean growth ranking. Partitioning of variance components showed that variation in growth was explained by physiological stages and clone to 4% and 24%, respectively, and for interaction between clone and physiological stage to 9%. Corresponding values for leison length in the inner bark were 3%, 14% and 5%, respectively. Fungal growth in wood and leison length in the inner bark were strongly correlated (r{sup 2} ranging between 0.23 and 0.36). When cuttings were inoculated during bud-flushing, leison length and fungal growth in wood were both strongly correlated with bud-flushing index of the cuttings (r{sup 2} = 0.03 and 0.04 respectively) but that was not the case for the other stages. The number of active fine-roots and the degree of wilting of the cuttings were negatively correlated with leison length and fungal growth (r{sup 2} ranging between 0.01 and 0.13). Height and diameter varied greatly between the clones and both were negatively correlated with fungal extension (r{sup 2} ranging between 0.01 and 0.09). 33 refs, 2 figs, 3 tabs

Remote Laser Cutting of CFRP: Improvements in the Cut Surface

Science.gov (United States)

Stock, Johannes; Zaeh, Michael F.; Conrad, Markus

In the automotive industry carbon fibre reinforced plastics (CFRP) are considered as a future key material to reduce the weight of the vehicle. Therefore, capable production techniques are required to process this material in mass industry. E.g., state of the art methods for cutting are limited by the high tool wear or the feasible feed rate. Laser cutting processes are still under investigation. This paper presents detailed new studies on remote laser cutting of CFRP focusing on the influence of the material properties and the quality of the cut surface. By adding light absorbing soot particles to the resin of the matrix, the cutting process is improved and fewer defects emerge.

Multibeam Fibre Laser Cutting

DEFF Research Database (Denmark)

Olsen, Flemming Ove

The appearance of the high power high brilliance fibre laser has opened for new possibilities in laser materials processing. In laser cutting this laser has demonstrated high cutting performance compared to the dominating cutting laser, the CO2-laser. However, quality problems in fibre......-laser cutting have until now limited its application in metal cutting. In this paper the first results of proof-of-principle studies applying a new approach (patent pending) for laser cutting with high brightness short wavelength lasers will be presented. In the approach, multi beam patterns are applied...... to control the melt flow out of the cut kerf resulting in improved cut quality in metal cutting. The beam patterns in this study are created by splitting up beams from 2 single mode fibre lasers and combining these beams into a pattern in the cut kerf. The results are obtained with a total of 550 W of single...

Multibeam fiber laser cutting

DEFF Research Database (Denmark)

Olsen, Flemming Ove; Hansen, Klaus Schütt; Nielsen, Jakob Skov

2009-01-01

The appearance of the high power high brilliance fiber laser has opened for new possibilities in laser materials processing. In laser cutting this laser has demonstrated high cutting performance compared to the dominating Cutting laser, the CO2 laser. However, quality problems in fiber......-laser cutting have until now limited its application to metal cutting. In this paper the first results of proof-of-principle Studies applying a new approach (patent pending) for laser cutting with high brightness and short wavelength lasers will be presented. In the approach, multibeam patterns are applied...... to control the melt flow out of the cut kerf resulting in improved cut quality in metal cutting. The beam patterns in this study are created by splitting up beams from two single mode fiber lasers and combining these beams into a pattern in the cut kerf. The results are obtained with a total of 550 W...

Cutting cleaner

International Nuclear Information System (INIS)

Elsen, R.P.H. van; Smits, M.

1991-01-01

This paper presents the results of a long term field test of the Cutting Cleaner, which is used for the treatment of wet oil contaminated cuttings (WOCC) produced when drilling with Oil Based Mud (OBM). It was concluded that it is possible to reduce the oil content of cuttings to an average of 1 - 2%. The recovered base oil can be reused to make new oil based mud

i-LOVE: ISS-JEM lidar for observation of vegetation environment

Science.gov (United States)

Asai, Kazuhiro; Sawada, Haruo; Sugimoto, Nobuo; Mizutani, Kohei; Ishii, Shoken; Nishizawa, Tomoaki; Shimoda, Haruhisa; Honda, Yoshiaki; Kajiwara, Koji; Takao, Gen; Hirata, Yasumasa; Saigusa, Nobuko; Hayashi, Masatomo; Oguma, Hiroyuki; Saito, Hideki; Awaya, Yoshio; Endo, Takahiro; Imai, Tadashi; Murooka, Jumpei; Kobatashi, Takashi; Suzuki, Keiko; Sato, Ryota

2012-11-01

It is very important to watch the spatial distribution of vegetation biomass and changes in biomass over time, representing invaluable information to improve present assessments and future projections of the terrestrial carbon cycle. A space lidar is well known as a powerful remote sensing technology for measuring the canopy height accurately. This paper describes the ISS(International Space Station)-JEM(Japanese Experimental Module)-EF(Exposed Facility) borne vegetation lidar using a two dimensional array detector in order to reduce the root mean square error (RMSE) of tree height due to sloped surface.

Leaf-cutting ants Acromyrmex niger Smith, 1858 (Hymenoptera; Formicidae) used as bioindicators of agrotoxics residues

International Nuclear Information System (INIS)

Liriana Belizi; Rio Cantagalli; Denise Alves Lopes; Ana Liscia Paz Barateiro Stuchi; Maria Claudia Colla Ruvolo Takasusuki

2014-01-01

Despite the condition of leaf-cutting ant pests in agroecosystems, it is undeniable the benefits they can bring in certain situations or environments. The leaf-cutting ants of the genus Acromyrmex attack mainly leaves of vegetables and fruit trees exposing not only to the agrochemicals used for their control as well as to those used for the control of other pests. Due to the bioindicator potential of environmental quality of the ants and their frequent exposure to agrochemicals such as organophosphates, neonicotinoids and growth regulators insecticide used for pest control, it is necessary to study the sublethal effects that these pesticides may cause. The electrophoresis technique was used to study the activity of esterase isozymes involved in the metabolism of xenobiotics of A. niger, combined with changes in the expression of isozymes after contamination by pesticides. A. niger showed eight regions of esterase activity, which were called EST-1, EST-2, EST-3, EST-4, EST-5, EST-6, EST-7 and EST-8 according to the electrophoretic mobility. As the specificity to α and β - naphthyl acetate substrates, the EST-7 and EST-8 may be classified as α esterase and the others as ± b esterases. EST-5 is considered an enzyme of the type cholinesterase ii and the others are of the type carboxylesterase. The electrophoretic analysis showed partial inhibition to all esterases subjected to the contact with Malathion organophosforate at the concentrations 1 x 10-3 % and 5 x 10-3 %, which may be considered as a biomarker for the presence of residues of this insecticide in the environment. The regression analysis for sublethal effects of the tested pesticides demonstrated correlation between dose and mortality only for Thiametoxam neonicotinoid pesticide.

Enhanced Conjugation of Auxin by GH3 Enzymes Leads to Poor Adventitious Rooting in Carnation Stem Cuttings.

Science.gov (United States)

Cano, Antonio; Sánchez-García, Ana Belén; Albacete, Alfonso; González-Bayón, Rebeca; Justamante, María Salud; Ibáñez, Sergio; Acosta, Manuel; Pérez-Pérez, José Manuel

2018-01-01

Commercial carnation ( Dianthus caryophyllus ) cultivars are vegetatively propagated from axillary stem cuttings through adventitious rooting; a process which is affected by complex interactions between nutrient and hormone levels and is strongly genotype-dependent. To deepen our understanding of the regulatory events controlling this process, we performed a comparative study of adventitious root (AR) formation in two carnation cultivars with contrasting rooting performance, "2101-02 MFR" and "2003 R 8", as well as in the reference cultivar "Master". We provided molecular evidence that localized auxin response in the stem cutting base was required for efficient adventitious rooting in this species, which was dynamically established by polar auxin transport from the leaves. In turn, the bad-rooting behavior of the "2003 R 8" cultivar was correlated with enhanced synthesis of indole-3-acetic acid conjugated to aspartic acid by GH3 proteins in the stem cutting base. Treatment of stem cuttings with a competitive inhibitor of GH3 enzyme activity significantly improved rooting of "2003 R 8". Our results allowed us to propose a working model where endogenous auxin homeostasis regulated by GH3 proteins accounts for the cultivar dependency of AR formation in carnation stem cuttings.

Crop Type Classification Using Vegetation Indices of RapidEye Imagery

Science.gov (United States)

Ustuner, M.; Sanli, F. B.; Abdikan, S.; Esetlili, M. T.; Kurucu, Y.

2014-09-01

Cutting-edge remote sensing technology has a significant role for managing the natural resources as well as the any other applications about the earth observation. Crop monitoring is the one of these applications since remote sensing provides us accurate, up-to-date and cost-effective information about the crop types at the different temporal and spatial resolution. In this study, the potential use of three different vegetation indices of RapidEye imagery on crop type classification as well as the effect of each indices on classification accuracy were investigated. The Normalized Difference Vegetation Index (NDVI), the Green Normalized Difference Vegetation Index (GNDVI), and the Normalized Difference Red Edge Index (NDRE) are the three vegetation indices used in this study since all of these incorporated the near-infrared (NIR) band. RapidEye imagery is highly demanded and preferred for agricultural and forestry applications since it has red-edge and NIR bands. The study area is located in Aegean region of Turkey. Radial Basis Function (RBF) kernel was used here for the Support Vector Machines (SVMs) classification. Original bands of RapidEye imagery were excluded and classification was performed with only three vegetation indices. The contribution of each indices on image classification accuracy was also tested with single band classification. Highest classification accuracy of 87, 46 % was obtained using three vegetation indices. This obtained classification accuracy is higher than the classification accuracy of any dual-combination of these vegetation indices. Results demonstrate that NDRE has the highest contribution on classification accuracy compared to the other vegetation indices and the RapidEye imagery can get satisfactory results of classification accuracy without original bands.

Self-crafting vegetable snacks: testing the IKEA-effect in children.

Science.gov (United States)

Raghoebar, Sanne; van Kleef, Ellen; de Vet, Emely

2017-01-01

The purpose of this paper is to test whether the IKEA-effect (Norton et al. , 2012) - better liking for self-crafted products than for identical products crafted by others - can be exploited to increase liking and consumption of vegetable snacks in children. A between-subjects experiment was conducted at an after school care facility. In total, 86 children aged four to six either crafted a peacock with vegetables or with non-food objects following an example. After the task, children ate snack vegetables ad libitum, and rated their liking for the vegetables and pride in crafting the peacock. No significant main effect of the vegetable snack creation on consumption and liking was observed. Also, perceived pride did not mediate the effect of self-crafting vegetable snacks on consumption of and liking for vegetables. Vegetable consumption did not differ between children who were either simply exposed to vegetable snacks while crafting or those who were crafting the vegetable snacks themselves. The equal consumption might suggest that this is caused by simple exposure, but more research is needed comparing self-crafting and exposure to a condition where there is no initial exposure to vegetables. Although the IKEA-effect has been demonstrated in adults, this is one of the first studies evaluating the IKEA-effect in children and as a means to increase liking for a generally disliked product in this target group, i.e. vegetables. The IKEA-effect could not be replicated under these more stringent conditions, where the experimental set-up enabled disentangling exposure and crafting effects.

Laser cutting or water-jet cutting. Laser setsudan ka water-jet setsudan ka

Energy Technology Data Exchange (ETDEWEB)

Yamada, T. (Shibuya Kogyo Co. Ltd., Ishikawa (Japan))

1991-05-01

The recent spread of carbon oxide laser cutter is so startlingly fast, but at the same time, water jet cutting using ultra high pressure water stream is drawing attention as it has identical characteristics, and opens the way to cutting materials that have been hitherto difficult to cut. The authors, who are fabricators of cutters of both types, gave the comparisons and explanations on several examples referring to materials that can be cut, cutting accuracy, speed, shape and thermal effects to cut face, and running cost in detail. However, simple comparison is difficult. For instance, cutting 6 mm thick SUS sheet costs a running cost of 65 yen per meter in laser cutting, and 535 yen per meter in water jet cutting, but this situation is often reversed when other material or sheet thickness is selected. The actual situation in the sheet metal processing industry at the present time is that it uses by far more laser processing machines, and uses water jet cutters to supplement for cutting materials more difficult to cut. 10 figs., 3 tabs.

Analyses of changes in vegetation cover in the South and Sub-Taiga of Western Siberia using Landsat data

Science.gov (United States)

Dyukarev, Egor; Pologova, Nina; Golovatskaya, Eugenia

2010-05-01

Understanding human impact on vegetation composition and structure, at scales from the patch to the globe, and capacity to monitor change over time is fundamental research problem to address Global Change and ensure sustainable development. Natural ecosystems at the South and Sob-Taiga zone of Western Siberia are characterized by development of an early successional states, given the projected increase in disturbance, or will be converted into human-dominated terrestrial production systems. Disturbances (e.g., fire, dieback due to insect attacks) appear to be increasing in some regions, leading to fragmentation of natural ecosystems and to a generally "weedier," structurally simpler biosphere with fewer systems in a more ecologically complex old-growth state. The analysis of structure of vegetation cover at two test sites located at the south-west part of the West-Siberian Plain in the South and Sub-Taiga zone was made using LANDSAT space images and ground data. The studied area of the first test site ("Bakchar") is occupied by bogs, paludificated forests and cultivated lands. Test site "Tomsk" covered by cultivated lands in the south, dark coniferous forest complexes an early and old-growth state in the north part. Mire types at the test sites are presented by open fens, ridge-hollow / ridge-lake complexes and pine-shrub-sphagnum communities with different tree height and layer density. During the XX century the vegetation cover was exposed to natural and anthropogenic changes. Comparison of space images from different years (1990, 1999 and 2007) allowed revealing dynamics in vegetation cover. Forest change was calculated using the Disturbance Index (Healey, 2006). Decrease of forest area in 1990-1999 are primary occurs due to intense forest cutting for timber industry and local use. A strong wind have damaged forests between 1990 and 1999 in stripes oriented from south-west to north -east in the prevailing wind direction. Strong winds were registered in 2003

[Influence of low-frequency magnetotherapy and HF-puncture on the heart rhythm in hypertensive workers exposed to vibration].

Science.gov (United States)

Drobyshev, V A; Loseva, M I; Sukharevskaia, T M; Michurin, A I

2001-01-01

The authors present results concerning use of low-frequency magnetic fields and HF-therapy for correction of vegetative homeostasis in workers with variable length of service, exposed to vibration, having early forms of arterial hypertension. The most positive changes of vegetative status and central hemodynamics are seen in workers with low length of service.

Effect of Organic Dust Exposure on Pulmonary Functions in Workers of Vegetable Market with Special Reference to its Microbial Content.

Science.gov (United States)

Goel, Arun; Omar, Balram Ji; Kathrotia, Rajesh; Patil, Prashant M; Mittal, Sunita

2018-01-01

Wholesale vegetable market is a rich source of generation of organic dust as loads of fruits and vegetables are loaded and unloaded here daily. Thus, regular workers are exposed to this organic dust for a considerable period of time depending on their work schedule. This study was planned to determine the microbial status of organic dust and to explore its association with pulmonary functions in the workers of wholesale vegetable market in Rishikesh. It was a cross-sectional exploratory/observational study. Thirty-five apparently healthy adult males were selected from vegetable market having no history of any chronic illness. Smokers and alcoholic were excluded from the study. The same number of age- and sex-matched controls with the same exclusion criteria were recruited from workers not working in the vegetable market and also not exposed to any other kinds of organic dust. Microbial culture of air in the vegetable market was done. It was compared with the microbial status of air in the working place of controls. Pulmonary functions of all the workers were performed with the help of digital spirometer (Helios 401). Bacterial and fungal concentration was found to be significantly higher in the air of vegetable market as compared to air in the workplace of controls (such as coagulase-negative staphylococci >25 colony-forming unit (CFU) at incubation temperature vs. 10-12 CFU at incubation temperature, significant growth of Mucor , Aspergillus niger , and Candida nonalbicans in vegetable market as compared to workplace of controls). Pulmonary function parameters (percentage forced expiratory volume in 1 st s (FEV 1 ), percentage predicted forced expiratory flow in mid-half of expiration, and FEV 1 ) of workers exposed to organic dust in vegetable market were also significantly lower ( P < 0.05). Exposure of organic dust is associated with compromised pulmonary functions and there is a need of formulation of safety guidelines.

Technology development for cutting a reactor pressure vessel using a mechanical cutting technique

International Nuclear Information System (INIS)

Watanabe, Masaaki; Miyasaka, Yasuhiko; Miyao, Hidehiko; Ooki, Arahiko; Ninomiya, Toshiaki; Koiwai, Masami

2001-01-01

On decommissioning of nuclear facilities, the thermal cutting technique such as an oxygen-acetylene gas cutting and a plasma arc cutting are generally used for cutting massive and thick steel structures in consideration with cutting speed and control performance. These techniques generate dust, smoke, aerosol and a large quantity of secondary waste. Mechanical cutting technique has an advantage of small amount of secondary waste, and the metal chips from the kerf recovered easily compared with these thermal cutting technique. The remote mechanical cutting system for highly activated RPV has been developed with the manner which achieves the safety and cost effectiveness. The development has been performed on consignment to RANDEC from the Science and Technology Agency of Japan. (author)

Soaking grapevine cuttings in water: a potential source of cross contamination by micro-organisms

Directory of Open Access Journals (Sweden)

Helen WAITE

2013-09-01

Full Text Available Grapevine nurseries soak cuttings in water during propagation to compensate for dehydration and promote root initiation. However, trunk disease pathogens have been isolated from soaking water, indicating cross contamination. Cuttings of Vitis vinifera cv. Sunmuscat and V. berlandieri x V. rupestris rootstock cv. 140 Ruggeri were immersed in sterilized, deionised water for 1, 2, 4, 8 and 16 h. The soaking water was cultured (25°C for 3 days on non-specific and specific media for fungi and bacteria. The base of each cutting was debarked and trimmed and three 3 mm thick, contiguous, transverse slices of wood cultured at 25°C for 3 days. The soaking water for both cultivars became contaminated with microorganisms within the first hour. Numbers of fungi iso-lated from the wood slices soaked for one hour were significantly greater than those from non-soaked cuttings. The number of bacterial colonies growing from the wood slices increased after soaking for 2‒4 h in Sunmuscat. In a second experiment Shiraz cuttings were soaked for 1, 2, 4, 8 and 24 h. The soaking water became contaminated within the first hour but only the bacterial count increased significantly over time. Microorganisms also established on the container surfaces within the first hour although there were no significant increases over 24 h. These results confirm that soaking cuttings is a potential cause of cross contamination and demonstrate contamination of cuttings occurs after relatively short periods of soaking. Avoiding exposing cuttings to water will reduce the transmission of trunk diseases in propagation.

Machining of Some Difficult-to-Cut Materials with Rotary Cutting Tools

OpenAIRE

Stjernstoft, Tero

2004-01-01

Automobile and aero industries have an increasing interestin materials with improved mechanical properties. However, manyof these new materials are classified as difficult-to-cut withconventional tools. It is obvious that tools, cutting processesand cutting models has to be devel-oped parallel to materialsscience. In this thesis rotary cutting tools are tested as analternative toexpensive diamond or cubic bore nitridetools. Metal matrix composites mostly consist of a light metalalloy (such as...

Minimizing waste (off-cuts using cutting stock model: The case of one dimensional cutting stock problem in wood working industry

Directory of Open Access Journals (Sweden)

Gbemileke A. Ogunranti

2016-09-01

Full Text Available Purpose: The main objective of this study is to develop a model for solving the one dimensional cutting stock problem in the wood working industry, and develop a program for its implementation. Design/methodology/approach: This study adopts the pattern oriented approach in the formulation of the cutting stock model. A pattern generation algorithm was developed and coded using Visual basic.NET language. The cutting stock model developed is a Linear Programming (LP Model constrained by numerous feasible patterns. A LP solver was integrated with the pattern generation algorithm program to develop a one - dimensional cutting stock model application named GB Cutting Stock Program. Findings and Originality/value: Applying the model to a real life optimization problem significantly reduces material waste (off-cuts and minimizes the total stock used. The result yielded about 30.7% cost savings for company-I when the total stock materials used is compared with the former cutting plan. Also, to evaluate the efficiency of the application, Case I problem was solved using two top commercial 1D-cutting stock software.  The results show that the GB program performs better when related results were compared. Research limitations/implications: This study round up the linear programming solution for the number of pattern to cut. Practical implications: From Managerial perspective, implementing optimized cutting plans increases productivity by eliminating calculating errors and drastically reducing operator mistakes. Also, financial benefits that can annually amount to millions in cost savings can be achieved through significant material waste reduction. Originality/value: This paper developed a linear programming one dimensional cutting stock model based on a pattern generation algorithm to minimize waste in the wood working industry. To implement the model, the algorithm was coded using VisualBasic.net and linear programming solver called lpsolvedll (dynamic

Identification of innovative potential quality markers in rocket and melon fresh-cut produce.

Science.gov (United States)

Cavaiuolo, Marina; Cocetta, Giacomo; Bulgari, Roberta; Spinardi, Anna; Ferrante, Antonio

2015-12-01

Ready-to-eat fresh cut produce are exposed to pre- and postharvest abiotic stresses during the production chain. Our work aimed to identify stress responsive genes as new molecular markers of quality that can be widely applied to leaves and fruits and easily determined at any stage of the production chain. Stress responsive genes associated with quality losses were isolated in rocket and melon fresh-cut produce and their expression levels analyzed by quantitative real time PCR (qRT-PCR) at different time points after harvest at 20 °C and 4 °C. qRT-PCR results were supported by correlation analysis with physiological and biochemical determinations evaluated at the same conditions such as chlorophyll a fluorescence indices, total, reducing sugars, sucrose, ethylene, ascorbic acid, lipid peroxidation and reactive oxygen species. In both species the putative molecular markers increased their expression soon after harvest suggesting a possible use as novel and objective quality markers of fresh-cut produces. Copyright © 2015 Elsevier Ltd. All rights reserved.

The impact of biopreservatives and storage temperature in the quality and safety of minimally processed mixed vegetables for soup.

Science.gov (United States)

Alvarez, María V; Ponce, Alejandra G; Mazzucotelli, Cintia A; Moreira, María R

2015-03-30

The combined effects of bioactive agents (tea tree essential oil, propolis extract and gallic acid) and storage temperature on the microbiological and sensory quality of fresh-cut mixed vegetables for soup (celery, leek and butternut squash) were studied with the objective of preserving its quality and safety. Refrigeration temperature was confirmed as the main factor to limit the growth of spoilage and pathogenic microorganisms. Biopreservatives applied on mixed vegetables were effective only when combined with optimal refrigeration temperature (5 °C). Bioactive compounds showed slight effectiveness in controlling the microbiota present in mixed vegetables, although coliforms were greatly reduced by gallic acid and propolis treatments, achieving 0.5-2 log unit reductions during storage. Also, these agents showed antimicrobial activity against endogenous Escherichia coli and inoculated E. coli O157:H7, exerting a bacteriostatic effect and reducing population counts by 0.9-1.2 log CFU g(-1) at 10 days of refrigerated storage. The combination of propolis treatment with refrigerated storage conditions effectively preserved the sensory quality and prolonged the sensory shelf life of fresh-cut mixed vegetables by 3 days. The use of natural agents such as propolis extract to preserve the quality and safety of mixed vegetables for soup might be an interesting option to address the concerns of the consumer about the use of synthetic chemical antimicrobials potentially harmful to health. © 2014 Society of Chemical Industry.

Microbiological survey of raw and ready-to-eat leafy green vegetables marketed in Italy.

Science.gov (United States)

Losio, M N; Pavoni, E; Bilei, S; Bertasi, B; Bove, D; Capuano, F; Farneti, S; Blasi, G; Comin, D; Cardamone, C; Decastelli, L; Delibato, E; De Santis, P; Di Pasquale, S; Gattuso, A; Goffredo, E; Fadda, A; Pisanu, M; De Medici, D

2015-10-01

The presence of foodborne pathogens (Salmonella spp., Listeria monocytogenes, Escherichia coli O157:H7, thermotolerant Campylobacter, Yersinia enterocolitica and norovirus) in fresh leafy (FL) and ready-to-eat (RTE) vegetable products, sampled at random on the Italian market, was investigated to evaluate the level of risk to consumers. Nine regional laboratories, representing 18 of the 20 regions of Italy and in which 97.7% of the country's population resides, were involved in this study. All laboratories used the same sampling procedures and analytical methods. The vegetable samples were screened using validated real-time PCR (RT-PCR) methods and standardized reference ISO culturing methods. The results show that 3.7% of 1372 fresh leafy vegetable products and 1.8% of 1160 "fresh-cut" or "ready-to-eat" (RTE) vegetable retailed in supermarkets or farm markets, were contaminated with one or more foodborne pathogens harmful to human health. Copyright © 2015 Elsevier B.V. All rights reserved.

Installation of an artificial vegetating island in oligomesotrophic Lake Paro, Korea.

Science.gov (United States)

Seo, Eun-Young; Kwon, Oh-Byung; Choi, Seung-Ik; Kim, Ji-Ho; Ahn, Tae-Seok

2013-01-01

After cut off of inflowing water, Lake Paro, an oligomesotrophic lake lost littoral zone, an important region for the aquatic ecosystem. For the first step of restoration, the artificial vegetation island was installed. The concentration of nutrients in lake water was not sufficient for the growth of macrophyte as total phosphate was ranged from 58 to 83 μg L(-1). In order to overcome this problem, the hydrophobic substratum for bacterial attachment was selected as buoyant mat material of the artificial vegetation island. In this medium, total phosphate and total nitrogen were ranged from 190 to 1,060 μg L(-1) and from 4.9 to 9.1 mg L(-1), respectively. These concentrations were high enough for macrophytes growth. After launching 1,800 m(2) of AVI in Lake Paro, the macrophytes, Iris pseudoacorus and Iris ensata, grew well after five years of launching without the addition of fertilizer. Furthermore, fishes were plentiful under the artificial vegetation island, and ducks were observed on the artificial vegetation island. Bacteria using sunlight as energy source and self-designed ecotechnology can be used as an alternative method for the restoration of disturbed littoral zone in oligo-mesotrophic lakes.

Propagação de amoreira-preta utilizando estacas lenhosas Propagation of blackberry using of woody cutting

Directory of Open Access Journals (Sweden)

Fabíola Villa

2003-08-01

Full Text Available A amoreira-preta (Rubus sp é uma espécie de clima temperado que, por ocasião da poda hibernal, realizada durante o período de dormência, produz grande quantidade de material vegetal que pode ser utilizado na propagação. Dessa forma, objetivou-se verificar o potencial de enraizamento de estacas lenhosas de duas cultivares de amoreira-preta tratadas com ácido indolbutírico (AIB. De ramos com um ano de idade coletados de plantas-matrizes das cultivares Brazos e Guarani, foram retiradas estacas lenhosas, sem folhas, com aproximadamente 15 cm e tratadas com solução de AIB, nas concentrações de 0, 1000, 2000 e 3000 mg.L-1, por 15 segundos. Posteriormente, as estacas foram plantadas em sacos de polietileno contendo mistura de areia e terra (2:1 v/v como substrato e mantidas em casa-de-vegetação, sob nebulização intermitente durante 90 dias.As cultivares apresentaram diferentes potenciais de enraizamento e desenvolvimento da parte aérea. Maiores percentuais de estacas enraizadas e brotadas, número de folhas e de brotos e peso da matéria seca das brotações foram obtidos em estacas de ‘Brazos' não-tratadas e em estacas de ‘Guarani' com aplicação de 2000 mg.L-1 de AIB.During the winter pruning, in the dormancy period, there are surpluses of great amount of vegetable material that can be used in the propagation. It was aimed at verifying the hardwood cuttings rooting potential of two blackberry cultivar treated with indolebutyric acid (IBA. Hardwood cuttings without leaves, with approximately 15 cm were collected from branches with one year old of ‘Brazos' and ‘Guarani' mother-plant and treated with solution of IBA at of 0, 1000, 2000 and 3000 mg.L-1 concentrations for 15 seconds immersion. Later the cuttings were planted in polyethylene bags containing sand and soil mixture (2:1 v/v as substrate and maintained in greenhouse under intermittent mist for 90 days. The cultivars presented them different rooting potential and

Underwater cutting techniques developments

International Nuclear Information System (INIS)

Bach, F.-W.

1990-01-01

The primary circuit structures of different nuclear powerplants are constructed out of stainless steels, ferritic steels, plated ferritic steels and alloys of aluminium. According to the level of the specific radiation of these structures, it is necessary for dismantling to work with remote controlled cutting techniques. The most successful way to protect the working crew against exposure of radiation is to operate underwater in different depths. The following thermal cutting processes are more or less developed to work under water: For ferritic steels only - flame cutting; For ferritic steels, stainless steels, cladded steels and aluminium alloys - oxy-arc-cutting, arc-waterjet-cutting with a consumable electrode, arc-saw-cutting, plasma-arc-cutting and plasma-arc-saw. The flame cutting is a burning process, all the other processes are melt-cutting processes. This paper explains the different techniques, giving a short introduction of the theory, a discussion of the possibilities with the advantages and disadvantages of these processes giving a view into the further research work in this interesting field. (author)

Diâmetro de estacas e substratos na propagação vegetativa de maniçoba, Manihot glaziovii Muell. Arg Diameter of cuttings and substrates in the vegetative propagation of maniçoba Manihot glaziovii Muell. Arg

Directory of Open Access Journals (Sweden)

Leonardo Elias Ferreira

2010-09-01

Full Text Available Objetivou-se com este trabalho estudar a influência do diâmetro das estacas e dos substratos na propagação vegetativa de maniçoba, Manihot glaziovii Muell. Arg. Utilizou-se o delineamento em blocos casualizados em esquema fatorial 10 x 3, sendo 10 substratos e 3 diâmetros de estacas, totalizando 30 tratamentos, oriundos das combinações entre substratos e diâmetros de estacas, com 4 repetições e 8 estacas por parcela. Os diâmetros das estacas corresponderam a: 0,5 a 1,0 cm (D1; 1,1 a 2,0 cm (D2 e 2,1 a 3,0 cm (D3. Foram utilizados 10 substratos: terra (S1; areia (S2; terra+areia: 1:1 (S3; terra+areia: 2:1 (S4; terra+areia: 1:2 (S5; terra+esterco: 1:1 (S6; areia+esterco: 1:1 (S7; terra+esterco: 2:1 (S8; areia+esterco: 2:1 (S9 e terra+areia+esterco: 1:1:1 (S10. As estacas lenhosas foram retiradas de plantas matrizes em repouso vegetativo, com comprimento de 25 cm e base cortada em bisel. Avaliou-se: percentual de estacas enraizadas; número de raízes; número de brotações; diâmetro e comprimento das brotações; número de folhas; massa seca das brotações e massa seca das raízes, obtidos aos 70 dias após instalação do experimento. Os melhores resultados para todas as variáveis estudadas foram obtidos com estacas de diâmetros entre 1,1 a 2,0 cm e entre 2,1 a 3,0 cm, com substratos que incluíram areia + esterco na sua composição. Tais tratamentos proporcionaram percentagens de enraizamento da ordem de 70 a 80%.This study aims to evaluate substrates and cuttings diameter influence in the vegetative propagation of Manihot glaziovii Muell.Arg. A design in randomized blocks using a 10 x 3 factorial scheme was used, being 10 substrates and 3 cuttings diameter, totaling 30 treatments, from the combinations between substrates and cuttings diameter, with 4 replications and 8 cuttings per plot. Diameters corresponded: 0.5 to 1.0 cm (D1; 1.1 to 2.0 cm (D2 and 2.1 to 3.0 cm (D3. Substrates used were: soil (S1; sand (S2; soil + sand: 1

Welding and cutting

International Nuclear Information System (INIS)

Drews, P.; Schulze Frielinghaus, W.

1978-01-01

This is a survey, with 198 literature references, of the papers published in the fields of welding and cutting within the last three years. The subjects dealt with are: weldability of the materials - Welding methods - Thermal cutting - Shaping and calculation of welded joints - Environmental protection in welding and cutting. (orig.) [de

Cutting assembly

Science.gov (United States)

Racki, Daniel J.; Swenson, Clark E.; Bencloski, William A.; Wineman, Arthur L.

1984-01-01

A cutting apparatus includes a support table mounted for movement toward and away from a workpiece and carrying a mirror which directs a cutting laser beam onto the workpiece. A carrier is rotatably and pivotally mounted on the support table between the mirror and workpiece and supports a conduit discharging gas toward the point of impingement of the laser beam on the workpiece. Means are provided for rotating the carrier relative to the support table to place the gas discharging conduit in the proper positions for cuts made in different directions on the workpiece.

Discrimination methods for biological contaminants in fresh-cut lettuce based on VNIR and NIR hyperspectral imaging

Science.gov (United States)

Mo, Changyeun; Kim, Giyoung; Kim, Moon S.; Lim, Jongguk; Lee, Seung Hyun; Lee, Hong-Seok; Cho, Byoung-Kwan

2017-09-01

The rapid detection of biological contaminants such as worms in fresh-cut vegetables is necessary to improve the efficiency of visual inspections carried out by workers. Multispectral imaging algorithms were developed using visible-near-infrared (VNIR) and near-infrared (NIR) hyperspectral imaging (HSI) techniques to detect worms in fresh-cut lettuce. The optimal wavebands that can detect worms in fresh-cut lettuce were investigated for each type of HSI using one-way ANOVA. Worm-detection imaging algorithms for VNIR and NIR imaging exhibited prediction accuracies of 97.00% (RI547/945) and 100.0% (RI1064/1176, SI1064-1176, RSI-I(1064-1173)/1064, and RSI-II(1064-1176)/(1064+1176)), respectively. The two HSI techniques revealed that spectral images with a pixel size of 1 × 1 mm or 2 × 2 mm had the best classification accuracy for worms. The results demonstrate that hyperspectral reflectance imaging techniques have the potential to detect worms in fresh-cut lettuce. Future research relating to this work will focus on a real-time sorting system for lettuce that can simultaneously detect various defects such as browning, worms, and slugs.

Effect of carrot puree edible films on quality preservation of fresh-cut carrots

Directory of Open Access Journals (Sweden)

Wang X.

2015-06-01

Full Text Available The effect of edible films based on carrot puree, chitosan, corn starch, gelatin, glycerol and cinnamaldehyde on fresh-cut carrots was studied during storage. Several parameters, such as firmness, colour, weight loss, total carotenoids, total phenols, polyphenol oxidase (PPO activity and peroxidase (POD activity in coated carrots were determined at regular intervals and then compared with the uncoated carrots throughout the storage period. Significant and expected changes were observed in all carrot samples that were compared. The coating treatment significantly (P < 0.05 delayed the senescence, reduced the deterioration of exterior quality and retained total carotenoids well compared with control (P < 0.05. In addition, significant inhibition of PPO activity (P < 0.05 and POD activity (P < 0.05 as well as reduced accumulation of polyphenols (P < 0.05 were observed for all coated samples. All of these favourable responses induced by coating treatment on minimally processed fresh-cut carrots showed beneficial physiological effects, which would give some useful references to the fresh-cut fruit and vegetable processing industry and satisfy people’s requirements allowing for extending product shelf life without negatively affecting the sensory quality or acceptability.

Restraining and neck cutting or stunning and neck cutting of veal calves.

Science.gov (United States)

Lambooij, E; van der Werf, J T N; Reimert, H G M; Hindle, V A

2012-05-01

Brain and heart activities were measured in 31 veal calves during restraining and rotating followed by neck cutting with or without stunning to evaluate welfare. After neck cutting correlation dimension analyses and %power of EEG beta wave fraction decreased gradually to lower values resulting in an induction of unconsciousness lasting on average 80s. Corneal reflex response ceased 135±57s after neck cutting. The CD scores and the %power of beta waves fell immediately after post-cut captive bolt and pre-cut electrical stunning to levels indicating unconsciousness. Heart rate in lairage increased upon entrance to the restrainer and again after rotation, heart rate variability decreased. Rotating the restrainer 90°, 120° or 180° compromised veal calf welfare and should be avoided. It is recommended to use post-cut captive bolt stunning or pre-cut electrical stunning inducing immediate unconsciousness. Copyright © 2011 Elsevier Ltd. All rights reserved.

Visual exposure and categorization performance positively influence 3- to 6-year-old children's willingness to taste unfamiliar vegetables.

Science.gov (United States)

Rioux, Camille; Lafraire, Jérémie; Picard, Delphine

2018-01-01

The present research focuses on the effectiveness of visual exposure to vegetables in reducing food neophobia and pickiness among young children. We tested the hypotheses that (1) simple visual exposure to vegetables leads to an increase in the consumption of this food category, (2) diverse visual exposure to vegetables (i.e., vegetables varying in color are shown to children) leads to a greater increase in the consumption of this food category than classical exposure paradigms (i.e. the same mode of presentation of a given food across exposure sessions) and (3) visual exposure to vegetables leads to an increase in the consumption of this food category through a mediating effect of an increase in ease of categorization. We recruited 70 children aged 3-6 years who performed a 4-week study consisting of three phases: a 2-week visual exposure phase where place mats with pictures of vegetables were set on tables in school cafeterias, and pre and post intervention phases where willingness to try vegetables as well as cognitive performances were assessed for each child. Results indicated that visual exposure led to an increased consumption of exposed and non-exposed vegetables after the intervention period. Nevertheless, the exposure intervention where vegetables varying in color were shown to children was no more effective. Finally, results showed that an ease of categorization led to a larger impact after the exposure manipulation. The findings suggest that vegetable pictures might help parents to deal with some of the difficulties associated with the introduction of novel vegetables and furthermore that focusing on conceptual development could be an efficient way to tackle food neophobia and pickiness. Copyright © 2017 Elsevier Ltd. All rights reserved.

Evaluating the success of vegetative propagation techniques in loquat cv. mardan

International Nuclear Information System (INIS)

Abbasi, N.A.; Hafiz, I.A.; Qureshi, A.A.

2014-01-01

Loquat cv. Mardan is a promising variety in loquat growing areas of northern Punjab and Khyber Pakhtoon Khwa. Loquat growers face serious issue of true to type plants availability. An attempt was made to explore different vegetative propagation techniques to find out most successful method for nursery industry. In the study propagation through cutting (during spring) and grafting during different suitable seasons (spring and monsoon) was examined. Cuttings were treated with different growth regulators to promote rooting. PBZ, IBA and their combinations were applied to the cuttings. Highest success percentage (40%) was achieved with PBZ. This limited success in rooting of cuttings was complete failure in getting plant survival at the end of the study. In the second phase of the experiment different grafting techniques i.e. tongue, cleft and side grafting were evaluated during two different seasons i.e., spring and monsoon. Cleft grafting in the months of March/ April proved to be most successful method in terms of success (70%), days taken for shoot growth, no. of leaves, shoots length, no. of branches. While in monsoon season side grafting was significantly better with a success of 85%. Overall, monsoon side grafting proved to be more successful than any other method. (author)

Sensory characteristics and consumer acceptance and purchase intention toward fresh-cut potatoes.

Science.gov (United States)

Montouto-Graña, Mónica; Cabanas-Arias, Sonia; Porto-Fojo, Silvia; Vázquez-Odériz, Ma Lourdes; Romero-Rodríguez, Ma Angeles

2012-01-01

For a new product to succeed in the market, it must be accepted by consumers. This study investigates consumer opinions on fresh-cut potatoes packaged under vacuum and under a modified atmosphere using home use tests. The data obtained were related to demographic characteristics and patterns of consumption and to purchase intention toward potatoes and other vegetables. The sensory characteristics evaluated by a panel of assessors trained in the sensory evaluation of potato were also considered. The results indicate that although both products were accepted by the consumer, vacuum-packed potatoes received slightly higher ratings and more consumers intended to purchase this product. The fresh-cut potato packaged under vacuum is a product with all the sensory characteristics that will be accepted by the consumers. The adaptation to the productive process at the industrial level, it can be performed with enough guarantees that the product will definitely be purchased by the consumers. © 2011 Institute of Food Technologists®

Enhanced Conjugation of Auxin by GH3 Enzymes Leads to Poor Adventitious Rooting in Carnation Stem Cuttings

Directory of Open Access Journals (Sweden)

Antonio Cano

2018-04-01

Full Text Available Commercial carnation (Dianthus caryophyllus cultivars are vegetatively propagated from axillary stem cuttings through adventitious rooting; a process which is affected by complex interactions between nutrient and hormone levels and is strongly genotype-dependent. To deepen our understanding of the regulatory events controlling this process, we performed a comparative study of adventitious root (AR formation in two carnation cultivars with contrasting rooting performance, “2101–02 MFR” and “2003 R 8”, as well as in the reference cultivar “Master”. We provided molecular evidence that localized auxin response in the stem cutting base was required for efficient adventitious rooting in this species, which was dynamically established by polar auxin transport from the leaves. In turn, the bad-rooting behavior of the “2003 R 8” cultivar was correlated with enhanced synthesis of indole-3-acetic acid conjugated to aspartic acid by GH3 proteins in the stem cutting base. Treatment of stem cuttings with a competitive inhibitor of GH3 enzyme activity significantly improved rooting of “2003 R 8”. Our results allowed us to propose a working model where endogenous auxin homeostasis regulated by GH3 proteins accounts for the cultivar dependency of AR formation in carnation stem cuttings.

Interface between technical physics and technological irradiation with reference to applications in vegetal and animal radiobiology

International Nuclear Information System (INIS)

Peteu, G.; Opris, M.

1994-01-01

The main goals of vegetal and animal radiobiology in a specific correlation with technical physics are the stimulation of germination and induced mutations; vegetal and animal food conservation, sterilization techniques, and modifications in the radiosensitivity of biological systems. The existing correlation between the effects of exposed and absorbed doses, and the behaviour of the 'microflora' (microbes, fungi), are discussed. (Author)

Paper Cuts.

Science.gov (United States)

Greene, Lisa A.

1990-01-01

Describes how to create paper cuts and suggests the most appropriate materials for young children that give good quality results. Describes the methods the author, a professional artist, uses to assemble her own paper cuts and how these can be adopted by older students. (KM)

Operation of the AM-50 cutting head under different cutting conditions

Energy Technology Data Exchange (ETDEWEB)

Sikora, W; Kusz, F; Fels, M

1988-02-01

Presents results of investigations into operation of the AM-50 heading machine. About 50% of headings, i.e. about 800 km/a, are driven by about 400 heading machines. It has been found that energy consumption depends on compression strength of rock and is 6 times higher for sandstone than for clayey shale. Power consumed by cutting heads depends mainly on the web used (30-150 mm depending on rock strength). Wear of cutting tools is 1-30 pieces per meter of heading advance at a working cross-section area of 15 m/sup 2/. The AM-50 machine uses cutting speeds of 1.1-3.5 m/s. Higher speeds negatively affect the resistance to cutting. Nonuniform tool wear on the cutting head circumference is an indication of improper head design that requires remedying.

Wet cutting

Energy Technology Data Exchange (ETDEWEB)

Hole, B. [IMC Technical Services (United Kingdom)

1999-08-01

Continuous miners create dust and methane problems in underground coal mining. Control has usually been achieved using ventilation techniques as experiments with water based suppression have led to flooding and electrical problems. Recent experience in the US has led to renewed interest in wet head systems. This paper describes tests of the Hydraphase system by IMC Technologies. Ventilation around the cutting zone, quenching of hot ignition sources, dust suppression, the surface trial gallery tests, the performance of the cutting bed, and flow of air and methane around the cutting head are reviewed. 1 ref., 2 figs., 2 photos.

Fundamentals of cutting.

Science.gov (United States)

Williams, J G; Patel, Y

2016-06-06

The process of cutting is analysed in fracture mechanics terms with a view to quantifying the various parameters involved. The model used is that of orthogonal cutting with a wedge removing a layer of material or chip. The behaviour of the chip is governed by its thickness and for large radii of curvature the chip is elastic and smooth cutting occurs. For smaller thicknesses, there is a transition, first to plastic bending and then to plastic shear for small thicknesses and smooth chips are formed. The governing parameters are tool geometry, which is principally the wedge angle, and the material properties of elastic modulus, yield stress and fracture toughness. Friction can also be important. It is demonstrated that the cutting process may be quantified via these parameters, which could be useful in the study of cutting in biology.

On the Cutting Performance of Segmented Diamond Blades when Dry-Cutting Concrete.

Science.gov (United States)

Sánchez Egea, A J; Martynenko, V; Martínez Krahmer, D; López de Lacalle, L N; Benítez, A; Genovese, G

2018-02-09

The objective of the present study is to analyze and compare the cutting performance of segmented diamond blades when dry-cutting concrete. A cutting criteria is proposed to characterize the wear of the blades by measuring the variation of the external diameter and the weight loss of the blade. The results exhibit the cutting blade SB-A, which has twice the density of diamonds and large contact area, exhibits less wear even though the material removal rate is higher compared with the other two cutting blades. Additionally, the surface topography of the different blades is evaluated to examine the impact of wear depending on the surface profile and the distribution of the diamonds in the blade's matrix. Large number of diamonds pull-out are found in blades type SB-C, which additionally shows the worst wear resistant capability. As a conclusion, the cutting efficiency of the blade is found to be related to the density of embedded diamonds and the type of the surface profile of the cutting blade after reaching the stop criteria.

Vegetation of natural and artificial shorelines in Upper Klamath Basin’s fringe wetlands

Science.gov (United States)

Ray, Andrew M.; Irvine, Kathryn M.; Hamilton, Andy S.

2013-01-01

The Upper Klamath Basin (UKB) in northern California and southern Oregon supports large hypereutrophic lakes surrounded by natural and artificial shorelines. Lake shorelines contain fringe wetlands that provide key ecological services to the people of this region. These wetlands also provide a context for drawing inferences about how differing wetland types and wave exposure contribute to the vegetative assemblages in lake-fringe wetlands. Here, we summarize how elevation profiles and vegetation richness vary as a function of wave exposure and wetland type. Our results show that levee wetland shorelines are 4X steeper and support fewer species than other wetland types. We also summarize the occurrence probability of the five common wetland plant species that represent the overwhelming majority of the diversity of these wetlands. In brief, the occurrence probability of the culturally significant Nuphar lutea spp. polysepala and the invasive Phalaris arundinacea in wave exposed and sheltered sites varies based on wetland type. The occurrence probability for P. arundinacea was greatest in exposed portions of deltaic shorelines, but these trends were reversed on levees where the occurrence probability was greater in sheltered sites. The widespread Schoenoplectus acutus var. acutus occurred throughout all wetland and exposure type combinations but had a higher probability of occurrence in wave exposed sites. Results from this work will add to our current understanding of how wetland shoreline profiles interact with wave exposure to influence the occurrence probability of the dominant vegetative species in UKB’s shoreline wetlands.

Device for cutting protrusions

Science.gov (United States)

Bzorgi, Fariborz M [Knoxville, TN

2011-07-05

An apparatus for clipping a protrusion of material is provided. The protrusion may, for example, be a bolt head, a nut, a rivet, a weld bead, or a temporary assembly alignment tab protruding from a substrate surface of assembled components. The apparatus typically includes a cleaver having a cleaving edge and a cutting blade having a cutting edge. Generally, a mounting structure configured to confine the cleaver and the cutting blade and permit a range of relative movement between the cleaving edge and the cutting edge is provided. Also typically included is a power device coupled to the cutting blade. The power device is configured to move the cutting edge toward the cleaving edge. In some embodiments the power device is activated by a momentary switch. A retraction device is also generally provided, where the retraction device is configured to move the cutting edge away from the cleaving edge.

Experimental research on the durability cutting tools for cutting-off steel profiles

Directory of Open Access Journals (Sweden)

Cristea Alexandru

2017-01-01

Full Text Available The production lines used for manufacturing U-shaped profiles are very complex and they must have high productivity. One of the most important stages of the fabrication process is the cutting-off. This paper presents the experimental research and analysis of the durability of the cutting tools used for cutting-off U-shaped metal steel profiles. The results of this work can be used to predict the durability of the cutting tools.

Study of Cutting Edge Temperature and Cutting Force of End Mill Tool in High Speed Machining

Directory of Open Access Journals (Sweden)

Kiprawi Mohammad Ashaari

2017-01-01

Full Text Available A wear of cutting tools during machining process is unavoidable due to the presence of frictional forces during removing process of unwanted material of workpiece. It is unavoidable but can be controlled at slower rate if the cutting speed is fixed at certain point in order to achieve optimum cutting conditions. The wear of cutting tools is closely related with the thermal deformations that occurred between the frictional contact point of cutting edge of cutting tool and workpiece. This research paper is focused on determinations of relationship among cutting temperature, cutting speed, cutting forces and radial depth of cutting parameters. The cutting temperature is determined by using the Indium Arsenide (InAs and Indium Antimonide (InSb photocells to measure infrared radiation that are emitted from cutting tools and cutting forces is determined by using dynamometer. The high speed machining process is done by end milling the outer surface of carbon steel. The signal from the photocell is digitally visualized in the digital oscilloscope. Based on the results, the cutting temperature increased as the radial depth and cutting speed increased. The cutting forces increased when radial depth increased but decreased when cutting speed is increased. The setup for calibration and discussion of the experiment will be explained in this paper.

Using Grass Cuttings from Sports Fields for Anaerobic Digestion and Combustion

Directory of Open Access Journals (Sweden)

Meike Nitsche

2017-03-01

Full Text Available Sports fields provide a recreation space for citizens, but also generate grass biomass, which is cut weekly during the main seasons and therefore could be used in energy generation (combustion or anaerobic digestion. To evaluate the technical suitability of the grass cuttings, silage was produced from four sports fields during one vegetation period and investigated for relevant properties. Potential methane yield was determined with batch tests. Mean methane yield was 291.86 lN·kg−1 VSadded (VS, volatile solid. Neutral detergent fiber concentration was low (44.47% DM, dry matter, yet mineral concentration was high in comparison to grass types cut at a lower frequency. Concentrations of Cl, N, and S, which may lead to unfavorable emissions, fouling, and corrosion during combustion, were too high for an unproblematic combustion process. This was still the case even after applying a mineral-reducing pretreatment, which generates a fiber-rich press cake and a press fluid rich in easy soluble substances. Digestion of the press fluid led to methane yields of 340.10 lN·kg−1 VSadded and the press cake had a higher heating value of 19.61 MJ·kg−1 DM, which is close to that of coniferous wood. It can be concluded that biomass from sports fields could be a suitable co-substrate in bio-energy generation.

The Cutting Process, Chips and Cutting Forces in Machining CFRP

DEFF Research Database (Denmark)

Koplev, A.; Lystrup, Aage; Vorm, T.

1983-01-01

The cutting of unidirectional CFRP, perpendicular as well as parallel to the fibre orientation, is examined. Shaping experiments, ‘quick-stop’ experiments, and a new chip preparation technique are used for the investigation. The formation of the chips, and the quality of the machined surface...... is discussed. The cutting forces parallel and perpendicular to the cutting direction are measured for various parameters, and the results correlated to the formation of chips and the wear of the tool....

Effects of water and nutrient addition on the coppice growth response of cut Terminalia sericea

Directory of Open Access Journals (Sweden)

Hloniphani Moyo

2016-07-01

Full Text Available The ability of a woody plant to coppice and remain vigorous largely depends on the severity of disturbances, resource availability and the mobilisation of stored reserves. There is limited information about the role played by resource limitation on the recovery of cut trees. This study investigated the effects of water and nutrient supplementation on coppice growth responses of resprouting cut trees in a semi-arid savannah in South Africa. Cut trees were exposed to different levels of water and nutrient (nitrogen and phosphorus supplementation over a period of 2 years in a factorial experimental design. We hypothesised that adding water and nutrients would result in an increased coppice growth response and replenishment of stored structural reserves. Adding water and nutrients significantly increased shoot diameter, shoot length and resprouting ratio for the initial 12 months after cutting but not stored structural reserves. Such a response pattern suggests that the initial growth of resprouting shoots may be strongly resource-limited, while resources are concentrated on supporting fewer resprouting shoots compared to a higher number. Conservation implications: If practicing rotational tree harvesting, trees resprouting in resource-poor locations need a longer resting period to recover stored reserves and to also recover lost height after cutting.

Experimental Investigation on Cutting Characteristics in Nanometric Plunge-Cutting of BK7 and Fused Silica Glasses.

Science.gov (United States)

An, Qinglong; Ming, Weiwei; Chen, Ming

2015-03-27

Ductile cutting are most widely used in fabricating high-quality optical glass components to achieve crack-free surfaces. For ultra-precision machining of brittle glass materials, critical undeformed chip thickness (CUCT) commonly plays a pivotal role in determining the transition point from ductile cutting to brittle cutting. In this research, cutting characteristics in nanometric cutting of BK7 and fused silica glasses, including machined surface morphology, surface roughness, cutting force and specific cutting energy, were investigated with nanometric plunge-cutting experiments. The same cutting speed of 300 mm/min was used in the experiments with single-crystal diamond tool. CUCT was determined according to the mentioned cutting characteristics. The results revealed that 320 nm was found as the CUCT in BK7 cutting and 50 nm was determined as the size effect of undeformed chip thickness. A high-quality machined surface could be obtained with the undeformed chip thickness between 50 and 320 nm at ductile cutting stage. Moreover, no CUCT was identified in fused silica cutting with the current cutting conditions, and brittle-fracture mechanism was confirmed as the predominant chip-separation mode throughout the nanometric cutting operation.

Gamma radiation use as a quarantine treatment alternative for cut flowers

International Nuclear Information System (INIS)

Kikuchi, Olivia Kimiko

1999-01-01

Methyl bromide is a broad spectrum pesticide to control insects, nematodes, weeds, pathogens and rodents It is effective to commodity treatment designed for exportation/importation, but is also toxic for human being. Besides, it is an ozone layer depleting substance and many countries are interested in finding other less damaging alternatives. The methyl bromide shall be banned until 2015 and one promising alternative is the radiation. It can be effective for some vegetables, like fresh cut flowers. The tolerance to gamma radiation was observed in some cut flowers. Dianthus (Caryophyllaceae), Gypsophyla (Caryophyllaceae), Gomphrena (Amarantaceae), Celosia (Amarantaceae) and Narcissus (Amaryllidaceae) were tolerant to 750 Gy. Heliconia and Strelitzia (Musaceae) were not tolerant, presenting a severe browning of the colored sepals. Anthurium (Araceae) was also sensitive to 750 Gy, presenting browning of the spike, discoloration and black spots on the sepals. The radiation inhibited the bud opening of Hemerocallis (Liliaceae) and Gladiolus (Iridaceae). Gerbera (Compositae) and Callistemon (Myrtaceae) wilted before the control flowers. Helianthus (Compositae) leaves wilted before the flowers because of the radiation. (author)

Analysis of changes in paper cutting forces during the cutting cycle in single-knife guillotine

OpenAIRE

Rusin, Agnieszka; Petriaszwili, Georgij

2013-01-01

Paper presents the results of changes in the three components of cutting forces of paper stacks cutting during the cutting cycle in single-knife guillotine. The changes of the three components of cutting force at different stages of cutting cycle were analyzed.

USE OF RENEWABLE SUBSTRATES FOR EX VITRO PRODUCTION OF Melaleuca alternifolia CHEEL CLONAL PLANTS BY MINI-CUTTINGS TECHNIQUE

Directory of Open Access Journals (Sweden)

Carlos Andre Stuepp

2017-12-01

Full Text Available The Australian species Melaleuca alternifolia Cheel. has a strong commercial importance due to the extraction of essential oils from its leaves used in the cosmetic and pharmaceutical industry. In order to obtain an efficient plant production system of M. alternifolia the mini-cuttings technique and the clonal mini-garden management in the productivity and rooting of mini-cuttings and different substrate compositions were analyzed during all the seasons. Mini-stumps derived from cuttings and grown in pots (2 L, were submitted to successive harvesting of their sprouts during the four seasons (september/2013 to august/2014. From the mini-stumps sprouts mini-cuttings were produced, wich were were planted in plastic tubes and kept in a greenhouse for 45 days. Six substrates were used for planting the mini-cuttings: commercial substrate (S1; substrate composed of 100% carbonized rice husk (CRH (S2; substrate composed of 100% coconut fiber (CF (S3; substrate composed of 50% CF and 50% CRH (S4; substrate composed of 30% CF and 70% CRH (S5; substrate composed of 70% FC and 30% CRH (S6. The high survival of mini-stumps (over 90% and the mini-cuttings production (282 mini-cuttings.m-2.month-1 in the shade house demonstrate the technical feasibility for the species, being summer the most appropriate time to collect propagules. The substrate composed by 70% CF + 30% CRH (S6 shows superior results for vegetative propagation of M. alternifolia (91.7% of rooted mini-cuttings, as the single one to contemplate simultaneously all parameters. Summer is recommended as the best time for rooting of mini-cuttings.

Synergies of carvacrol and 1,8-cineole to inhibit bacteria associated with minimally processed vegetables.

Science.gov (United States)

de Sousa, Jossana Pereira; de Azerêdo, Geíza Alves; de Araújo Torres, Rayanne; da Silva Vasconcelos, Margarida Angélica; da Conceição, Maria Lúcia; de Souza, Evandro Leite

2012-03-15

This study assessed the occurrence of an enhancing inhibitory effect of the combined application of carvacrol and 1,8-cineole against bacteria associated with minimally processed vegetables using the determination of Fractional Inhibitory Concentration (FIC) index, time-kill assay in vegetable broth and application in vegetable matrices. Their effects, individually and in combination, on the sensory characteristics of the vegetables were also determined. Carvacrol and 1,8-cineole displayed Minimum Inhibitory Concentration (MIC) in a range of 0.6-2.5 and 5-20 μL/mL, respectively, against the organisms studied. FIC indices of the combined application of the compounds were 0.25 against Listeria monocytogenes, Aeromonas hydrophila and Pseudomonas fluorescens, suggesting a synergic interaction. Application of carvacrol and 1,8-cineole alone (MIC) or in a mixture (1/8 MIC+1/8 MIC or 1/4 MIC+1/4 MIC) in vegetable broth caused a significant decrease (pvegetable broth and in experimentally inoculated fresh-cut vegetables. A similar efficacy was observed in the reduction of naturally occurring microorganisms in vegetables. Sensory evaluation revealed that the scores of the most-evaluated attributes fell between "like slightly" and "neither like nor dislike." The combination of carvacrol and 1,8-cineole at sub-inhibitory concentrations could constitute an interesting approach to sanitizing minimally processed vegetables. Copyright © 2011 Elsevier B.V. All rights reserved.

Impact of cutting and sheep grazing on ground-active spiders and carabids in intertidal salt marshes (Western France

Directory of Open Access Journals (Sweden)

Pétillon, J.

2007-12-01

Full Text Available The aims of this study were to characterize spider (Araneae and ground beetle (Coleoptera Carabidae communities in managed (cutting and sheep grazing and non-managed salt marshes and to assess the efficiency of management regimes in these particular ecosystems. The two groups were studied during 2002 in salt marshes of the Mont Saint-Michel Bay (NW France using pitfall traps. By opening soil and vegetation structures cutting and grazing enhanced the abundances of some halophilic species of spiders and ground beetles. Nevertheless, grazing appeared to be too intensive as spider species richness decreased. We discuss the implications of management practices in terms of nature conservation and their application in the particular area of intertidal salt marshes.

Cutting and Self-Harm

Science.gov (United States)

... Your feelings Feeling sad Cutting and self-harm Cutting and self-harm Self-harm, sometimes called self- ... There are many types of self-injury, and cutting is one type that you may have heard ...

Effects of air pollution on crops. I. Effects of gaseous sulfur dioxide and ozone on the occurrence of symptoms of injuries on vegetables

Energy Technology Data Exchange (ETDEWEB)

Masahara, O; Mega, K

1974-06-01

In order to obtain information on plant injuries due to air pollution to utilize susceptible plants as biological indicators of air pollution, potted plants such as chard, spinach, Chinese cabbage, and Japanese radish or cut plants such as Welsh onion were exposed in a glass house to sulfur dioxide at 0.4 ppM continuously for a week or to ozone for 6 hr at 0.13, 0.2, 0.4, and 0.6 ppM. The symptoms due to sulfur dioxide appeared first as peripheral and interveinal necrosis, followed by dehydration. The period of exposure required for the appearance of injuries depended mainly on the vegetable species and ranged from 1 day for potted herb mustard to more than a week for maize. A variety of cabbage did not show any injury after 1 week of continuous exposure to sulfur dioxide. The symptoms due to ozone appeared on the veinal or interveinal parts of leaves and were white to light brown in color on cruciferous vegetables and onions. Brown spots appeared on cucumber, and brown, reddish-purple, or dark purple lesions appeared on burdock, rice, and kidney bean. Damage was most severe on cucumbers occurring even at 0.13 ppM. The environmental conditions before and after the exposure to these gases affected the appearance of the symptoms.

Evaluation of Combined Disinfection Methods for Reducing Escherichia coli O157:H7 Population on Fresh-Cut Vegetables

Directory of Open Access Journals (Sweden)

Eva Petri

2015-07-01

Full Text Available Most current disinfection strategies for fresh-cut industry are focused on the use of different chemical agents; however, very little has been reported on the effectiveness of the hurdle technology. The effect of combined decontamination methods based on the use of different sanitizers (peroxyacetic acid and chlorine dioxide and the application of pressure (vacuum/positive pressure on the inactivation of the foodborne pathogen E. coli O157:H7 on fresh-cut lettuce (Lactuca sativa and carrots (Daucus carota was studied. Fresh produce, inoculated with E. coli O157:H7, was immersed (4 °C, 2 min in tap water (W, chlorine water (CW, chlorine dioxide (ClO2: 2 mg/L and peroxyacetic acid (PAA: 100 mg/L in combination with: (a vacuum (V: 10 mbar or (b positive pressure application (P: 3 bar. The product quality and antimicrobial effects of the treatment on bacterial counts were determined both in process washing water and on fresh-cut produce. Evidence obtained in this study, suggests that the use of combined methods (P/V + sanitizers results in a reduction on the microorganism population on produce similar to that found at atmospheric pressure. Moreover, the application of physical methods led to a significant detrimental effect on the visual quality of lettuce regardless of the solution used. Concerning the process water, PAA proved to be an effective alternative to chlorine for the avoidance of cross-contamination.

Evaluation of Combined Disinfection Methods for Reducing Escherichia coli O157:H7 Population on Fresh-Cut Vegetables.

Science.gov (United States)

Petri, Eva; Rodríguez, Mariola; García, Silvia

2015-07-23

Most current disinfection strategies for fresh-cut industry are focused on the use of different chemical agents; however, very little has been reported on the effectiveness of the hurdle technology. The effect of combined decontamination methods based on the use of different sanitizers (peroxyacetic acid and chlorine dioxide) and the application of pressure (vacuum/positive pressure) on the inactivation of the foodborne pathogen E. coli O157:H7 on fresh-cut lettuce (Lactuca sativa) and carrots (Daucus carota) was studied. Fresh produce, inoculated with E. coli O157:H7, was immersed (4 °C, 2 min) in tap water (W), chlorine water (CW), chlorine dioxide (ClO2: 2 mg/L) and peroxyacetic acid (PAA: 100 mg/L) in combination with: (a) vacuum (V: 10 mbar) or (b) positive pressure application (P: 3 bar). The product quality and antimicrobial effects of the treatment on bacterial counts were determined both in process washing water and on fresh-cut produce. Evidence obtained in this study, suggests that the use of combined methods (P/V + sanitizers) results in a reduction on the microorganism population on produce similar to that found at atmospheric pressure. Moreover, the application of physical methods led to a significant detrimental effect on the visual quality of lettuce regardless of the solution used. Concerning the process water, PAA proved to be an effective alternative to chlorine for the avoidance of cross-contamination.

On Permuting Cut with Contraction

OpenAIRE

Borisavljevic, Mirjana; Dosen, Kosta; Petric, Zoran

1999-01-01

The paper presents a cut-elimination procedure for intuitionistic propositional logic in which cut is eliminated directly, without introducing the multiple-cut rule mix, and in which pushing cut above contraction is one of the reduction steps. The presentation of this procedure is preceded by an analysis of Gentzen's mix-elimination procedure, made in the perspective of permuting cut with contraction. It is also shown that in the absence of implication, pushing cut above contraction doesn't p...

Advances in postharvest technologies to extend the storage life of minimally processed fruits and vegetables.

Science.gov (United States)

Ali, Asgar; Yeoh, Wei Keat; Forney, Charles; Siddiqui, Mohammed Wasim

2017-10-26

Minimally processed fresh produce is one of the fastest growing segments of the food industry due to consumer demand for fresh, healthy, and convenient foods. However, mechanical operations of cutting and peeling induce the liberation of cellular contents at the site of wounding that can promote the growth of pathogenic and spoilage microorganisms. In addition, rates of tissue senescence can be enhanced resulting in reduced storage life of fresh-cut fruits and vegetables. Chlorine has been widely adopted in the disinfection and washing procedures of fresh-cut produce due to its low cost and efficacy against a broad spectrum of microorganisms. Continuous replenishment of chlorine in high organic wash water can promote the formation of carcinogenic compounds such as trihalomethanes, which threaten human and environmental health. Alternative green and innovative chemical and physical postharvest treatments such as ozone, electrolyzed water, hydrogen peroxide, ultraviolet radiation, high pressure processing, and ultrasound can achieve similar reduction of microorganisms as chlorine without the production of harmful compounds or compromising the quality of fresh-cut produce.

Model for Reggeon-Pomeranchukon cuts

International Nuclear Information System (INIS)

Chia, S.

1977-01-01

A model is presented for calculating Reggeon-Pomeranchukon cuts, making use explicitly of the Mandelstam diagram. External spins are treated in a natural way. Calculation for the general case is outlined and it is shown that in practical application the cut can be calculated in a standard way. Cuts associated with the exchanges of π, rho, B, and A 2 are considered, and characteristics of the RP cuts, as well as the structure functions, are extracted and discussed. It is found that the model differs considerably from the absorption model. Two suppression schemes are operative which control the magnitudes of cut contributions to amplitudes with ''naturality'' opposite to the Reggeon. The πP cut is found to be a unique case because of the smallness of the pion mass. In general, the RP cuts are self-conspiratorial. At very high energies, all cuts, except πP cut, exhibit quasifactorization

Cutting method for structural component into block like shape, and device used for cutting

International Nuclear Information System (INIS)

Nakazawa, Koichi; Ito, Akira; Tateiwa, Masaaki.

1995-01-01

Two grooves each of a predetermined depth are formed along a surface of a structural component, and a portion between the two grooves is cut in the direction of the depth from the surface of the structural component by using a cutting wire of a wire saw device. Then, the cutting wire is moved in the extending direction of the grooves while optionally changing the position in the direction of the depth to conduct cutting for the back face. Further, the cutting wire is moved in the direction of the depth of the groove toward the surface, to cut a portion between the two grooves. The wire saw device comprises a wire saw main body movable along the surface of the structural component, a pair of wire guide portions extending in the direction of the depth, guide pooleys capable of guiding the cutting wire guides revolvably and rotatably disposed at the top end, and an endless annular cutting wire extending between the wire guide portions. Thus, it is possible to continuously cut out blocks set to optional size and thickness. In addition, remote cutting is possible with no requirement for an operator to access to the vicinity of radioactivated portions. (N.H.)

An FMS Dynamic Production Scheduling Algorithm Considering Cutting Tool Failure and Cutting Tool Life

International Nuclear Information System (INIS)

Setiawan, A; Wangsaputra, R; Halim, A H; Martawirya, Y Y

2016-01-01

This paper deals with Flexible Manufacturing System (FMS) production rescheduling due to unavailability of cutting tools caused either of cutting tool failure or life time limit. The FMS consists of parallel identical machines integrated with an automatic material handling system and it runs fully automatically. Each machine has a same cutting tool configuration that consists of different geometrical cutting tool types on each tool magazine. The job usually takes two stages. Each stage has sequential operations allocated to machines considering the cutting tool life. In the real situation, the cutting tool can fail before the cutting tool life is reached. The objective in this paper is to develop a dynamic scheduling algorithm when a cutting tool is broken during unmanned and a rescheduling needed. The algorithm consists of four steps. The first step is generating initial schedule, the second step is determination the cutting tool failure time, the third step is determination of system status at cutting tool failure time and the fourth step is the rescheduling for unfinished jobs. The approaches to solve the problem are complete-reactive scheduling and robust-proactive scheduling. The new schedules result differences starting time and completion time of each operations from the initial schedule. (paper)

Installation of an Artificial Vegetating Island in Oligomesotrophic Lake Paro, Korea

Directory of Open Access Journals (Sweden)

Eun-Young Seo

2013-01-01

Full Text Available After cut off of inflowing water, Lake Paro, an oligomesotrophic lake lost littoral zone, an important region for the aquatic ecosystem. For the first step of restoration, the artificial vegetation island was installed. The concentration of nutrients in lake water was not sufficient for the growth of macrophyte as total phosphate was ranged from 58 to 83 μg L−1. In order to overcome this problem, the hydrophobic substratum for bacterial attachment was selected as buoyant mat material of the artificial vegetation island. In this medium, total phosphate and total nitrogen were ranged from 190 to 1,060 μg L−1 and from 4.9 to 9.1 mg L−1, respectively. These concentrations were high enough for macrophytes growth. After launching 1,800 m2 of AVI in Lake Paro, the macrophytes, Iris pseudoacorus and Iris ensata, grew well after five years of launching without the addition of fertilizer. Furthermore, fishes were plentiful under the artificial vegetation island, and ducks were observed on the artificial vegetation island. Bacteria using sunlight as energy source and self-designed ecotechnology can be used as an alternative method for the restoration of disturbed littoral zone in oligo-mesotrophic lakes.

Advanced cutting techniques: laser and fissuration cutting

International Nuclear Information System (INIS)

Migliorati, B.; Gay, P.

1984-01-01

Experimental tests have been performed using CO 2 laser with output power 1 to 15 kW to evaluate the effect of varying the following parameters: material (carbon steel Fe 42 C, stainless steel AISI 304, concrete), laser power, beam characteristics, work piece velocity, gas type and distribution on the laser interaction zone. In the case of concrete, drilling depths of 80 mm were obtained in a few seconds using a 10 kW laser beam. Moreover pieces of 160 mm were cut at 0.01 meters per minute. Results with carbon steel indicated maximum thicknesses of 110 mm, cut at 0.01 meters per minute with 10 kW, depths about 20% lower were obtained with the AISI 304 stainless steel. A parallel investigation was aimed at characterizing particulate emission during the laser cutting process. At the end of the research it was possible to elaborate a preliminary proposal concerning a laser based dismantling system for the application to a typical Nuclear Power Station. (author)

Cutting agents for special metals

International Nuclear Information System (INIS)

Sugito, Seiji; Sakakibara, Fumi

1979-01-01

The quantity of use of special metals has increased year after year in the Plasma Research Institute, Nagoya University, with the development of researches on plasma and nuclear fusion. Most of these special metals are hard to cut, and in order to secure the surface smoothness and dimensional accuracy, considerable efforts are required. The method of experiment is as follows: cutting agents salt water and acetone, rape-seed oil, sulfide and chloride oil and water soluble cutting oil W grade 3; metals to be cut niobium, molybdenum, tantalum, titanium and tungsten; cutting conditions cutting speed 4.7 to 90 m/min, feed 0.07 to 0.2 mm/rev, depth of cut 0.1 to 0.4 mm, tool cemented carbide bit. Chemicals such as tetrachloromethane and trichloroethane give excellent cutting performance, but the toxicity is intense and the stimulative odor exists, accordingly they are hard to use practically. Cutting was easier when the salt water added with acetone was used than the case of rape-seed oil, but salt water is corrosive. Recently, the machining of molybdenum has been often carried out, and the water soluble cutting oil was the best. It is also good for cutting stainless steel, and its lubricating property is improved by adding some additives such as sulfur, chlorine, phosphorus and molybdenum disulfide. However after cutting with it, washing is required. (Kako, I.)

Performance Testing of Cutting Fluids

DEFF Research Database (Denmark)

Belluco, Walter

The importance of cutting fluid performance testing has increased with documentation requirements of new cutting fluid formulations based on more sustainable products, as well as cutting with minimum quantity of lubrication and dry cutting. Two sub-problems have to be solved: i) which machining...... tests feature repeatability, reproducibility and sensitivity to cutting fluids, and ii) to what extent results of one test ensure relevance to a wider set of machining situations. The present work is aimed at assessing the range of validity of the different testing methods, investigating correlation...... within the whole range of operations, materials, cutting fluids, operating conditions, etc. Cutting fluid performance was evaluated in turning, drilling, reaming and tapping, and with respect to tool life, cutting forces, chip formation and product quality (dimensional accuracy and surface integrity...

Comparing Potential Unstable Sites and Stable Sites on Revegetated Cut-Slopes of Mountainous Terrain in Korea

Directory of Open Access Journals (Sweden)

Sung-Ho Kil

2015-11-01

Full Text Available This study employs a diverse set of variables to explain slope stabilization on stable versus failure-prone revegetated cut-slopes in Korea. A field survey was conducted at potential unstable sites and stable sites using 23 variables. Through a non-parametric test of the field survey results, 15 variables were identified as primary determinants of slope failure. Of these variables, one described physical characteristics (elapsed year; four variables described vegetation properties (plant community, vegetation coverage rate, number of trees, and number of herbs; and 10 variables represented soil properties (porosity, soil hardness, water content, sand ratio and silt ratio of soil texture, tensile strength, permeability coefficient, soil depth, soil acidity, salt concentration, and organic matter. Slope angle, which was mainly considered in previous studies, of variables in physical characteristics was not statistically selected as one of the 15 variables because most of sites were located on steep slopes. The vegetation community, vegetation coverage, and number of trees influence slope stabilization. Vegetation coverage is highly correlated with other soil and vegetation variables, making it a major indicator of slope stabilization. All soil variables were related to slope failure such that subsequent slope failure was related to the method of slope revegetation rather than the environmental condition of the slope. Slope failure did not occur in revegetated slopes that matched the characteristics of the surrounding landscape and contained a large number of native trees. Most soil and vegetation variables showed differing values for whether a revegetated slope is potentially unstable or stable.

Accumulation of fluoride by plants and vegetables

International Nuclear Information System (INIS)

Njenga, L.W.; Kariuki, D.N.

1994-01-01

Fluoride in plant and vegetable samples has been determined using ion selective electrode. The analysis was carried out after ashing the sample on an open flame, adding perchloric acid and allowing the hydrogen fluoride to diffuse into sodium hydroxide layer.The results obtained show that kale and pumpkins can accumulate more than ten times their normal values of fluoride while plants were found to accumulate upto 100μg/g fluoride when exposed to highlevels of fluoride in water or soil. (author)

Female genital cutting.

Science.gov (United States)

Perron, Liette; Senikas, Vyta; Burnett, Margaret; Davis, Victoria

2013-11-01

To strengthen the national framework for care of adolescents and women affected by female genital cutting (FGC) in Canada by providing health care professionals with: (1) information intended to strengthen their knowledge and understanding of the practice; (2) directions with regard to the legal issues related to the practice; (3) clinical guidelines for the management of obstetric and gynaecological care, including FGC related complications; and (4) guidance on the provision of culturally competent care to adolescents and women with FGC. Published literature was retrieved through searches of PubMed, CINAHL, and The Cochrane Library in September 2010 using appropriate controlled vocabulary (e.g., Circumcision, Female) and keywords (e.g., female genital mutilation, clitoridectomy, infibulation). We also searched Social Science Abstracts, Sociological Abstracts, Gender Studies Database, and ProQuest Dissertations and Theses in 2010 and 2011. There were no date or language restrictions. Searches were updated on a regular basis and incorporated in the guideline to December 2011. Grey (unpublished) literature was identified through searching the websites of health technology assessment and health technology-related agencies, clinical practice guideline collections, clinical trial registries, and national and international medical specialty societies. The quality of evidence in this document was rated using the criteria described in the Report of the Canadian Task Force on Preventive Health Care (Table 1). Summary Statements 1. Female genital cutting is internationally recognized as a harmful practice and a violation of girls' and women's rights to life, physical integrity, and health. (II-3) 2. The immediate and long-term health risks and complications of female genital cutting can be serious and life threatening. (II-3) 3. Female genital cutting continues to be practised in many countries, particularly in sub-Saharan Africa, Egypt, and Sudan. (II-3) 4. Global migration

Remotely controlled cutting techniques in the field of nuclear decommissioning. Overview of effectively applied thermal cutting methods

International Nuclear Information System (INIS)

Bienia, H.; Klotz, B.

2008-01-01

This article describes 3 thermal cutting technologies that are effectively used in nuclear decommissioning projects: the autonomous flame cutting, the plasma arc cutting and the contact arc metal cutting. The autonomous flame cutting technology is based on a high pressure oxygen jet oxidizing the material in a small kerf. Not all metal types are appropriate for this technology. The plasma arc cutting, in contrast to the previous technology, uses an electronically induced plasma arc to melt a kerf in the material. Inside the plasma arc temperatures up to 30.000 K exist, so in theory, this temperature is sufficient to cut all materials. Contact arc metal cutting is a new thermal cutting technology for under-water cutting works. Here, a carbon blade cuts the components. An electric arc between the cutting blade and component melts a kerf into the material easing the cutting. This technology allows the cutting of complex structures with hollows. The applications in nuclear facility dismantling of these 3 cutting technologies and their limits are reported and their requirements (staff, investment) listed in a table. (A.C.)

Supplement Analysis for the Transmission System Vegetation Management Program FEIS DOE/EIS-0285/SA-110-Covington-Columbia No. 3

Energy Technology Data Exchange (ETDEWEB)

Hermeston, Mark W. [Bonneville Power Administration (BPA), Portland, OR (United States)

2002-10-02

Vegetation Management along the Covington-Columbia No. 3, 230kV transmission lines from structure 1/1 through structure 12/1. Corridor width varies from 150 feet to 537.5 feet. The project area is located within King County, Washington. BPA proposes to remove unwanted vegetation along the right-of-way, access roads and around tower structures along the subject transmission line corridor. Approximately 568.4 acres of the right-of-way will be treated using selective and non-selective methods that include hand cutting, mowing and herbicide treatments. Vegetation management is required for unimpeded operation and maintenance of the subject transmission line. See Section 1 of the attached checklist for a complete description of the proposal.

Extension without Cut

OpenAIRE

Straßburger , Lutz

2012-01-01

International audience; In proof theory one distinguishes sequent proofs with cut and cut-free sequent proofs, while for proof complexity one distinguishes Frege-systems and extended Frege-systems. In this paper we show how deep inference can provide a uniform treatment for both classifications, such that we can define cut-free systems with extension, which is neither possible with Frege-systems, nor with the sequent calculus. We show that the propositional pigeon-hole principle admits polyno...

Omics approaches on fresh-cut lettuce reveal global molecular responses to sodium hypochlorite and peracetic acid treatment.

Science.gov (United States)

Daddiego, Loretta; Bianco, Linda; Capodicasa, Cristina; Carbone, Fabrizio; Dalmastri, Claudia; Daroda, Lorenza; Del Fiore, Antonella; De Rossi, Patrizia; Di Carli, Mariasole; Donini, Marcello; Lopez, Loredana; Mengoni, Alessio; Paganin, Patrizia; Perrotta, Gaetano; Bevivino, Annamaria

2018-01-01

Lettuce is a leafy vegetable that is extensively commercialized as a ready-to-eat product because of its widespread use in human nutrition as salad. It is well known that washing treatments can severely affect the quality and shelf-life of ready-to-eat vegetables. The study presented here evaluated the effect of two washing procedures on fresh-cut lettuce during storage. An omics approach was applied to reveal global changes at molecular level induced by peracetic acid washing in comparison with sodium hypochlorite treatment. Microbiological analyses were also performed to quantify total bacterial abundance and composition. The study revealed wide metabolic alterations induced by the two sanitizers. In particular, transcriptomic and proteomic analyses pointed out a number of transcripts and proteins differentially accumulated in response to peracetic acid washing, mainly occurring on the first day of storage. In parallel, different microbiota composition and significant reduction in total bacterial load following washing were also observed. The results provide useful information for the fresh-cut industry to select an appropriate washing procedure preserving fresh-like attributes as much as possible during storage of the end product. Molecular evidence indicated peracetic acid to be a valid alternative to sodium hypochlorite as sanitizer solution. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Feasibility of ionizing radiation decontamination of ready to eat fresh vegetable salads for immunosuppressed patients

International Nuclear Information System (INIS)

Horak, Celina I.; Narvaiz, Patricia; Kairiyama, Eulogia; Adeil Pietranera, Maria S.; Gimenez, Palmira; Gronostajsky, D.

2003-01-01

In the last years consumer trends have increased for fresh like and minimally processed foods. Also, foods are frequently requested without or reduced chemical preservatives. Minimally processed foods have a limited shelf life and mainly rely on HACCP and refrigeration for preservation. However, over the last years, the detection of food borne illness outbreaks associated with fresh vegetables and fruits has increased. This is possible because these product characteristics, high moisture and their cut surface, provide excellent conditions for microorganisms growth. As the feasibility of applying ionizing radiation to inactivate microorganisms is well known, this project will contribute to define the minimal and maximum doses in order to assure the hygienic quality and shelf life of this fresh pre-cut vegetables and fruits. Immunosuppressed patients have different classes of diets, depending on the immunosuppression grade. The hygienic quality was determined on the basis of levels 2 and 3, for (recovery and ambulatory patients respectively). The products investigated were carrots and tomatoes and the irradiation facility was a Cobalt Source. The microorganisms analysed were TBC, Mould and Yeasts, Total coliforms and faecal coliforms. Sensorial evaluation was carried out on the basis of a hedonic scale. (author)

Aerodynamic Interactions During Laser Cutting

Science.gov (United States)

Fieret, J.; Terry, M. J.; Ward, B. A.

1986-11-01

Most laser cutting systems utilise a gas jet to remove molten or vaporised material from the kerf. The speed, economy and quality of the cut can be strongly dependent on the aerodynamic conditions created by the nozzle, workpiece proximity and kerf shape. Adverse conditions can be established that may lead to an unwelcome lack of reproducibility of cut quality. Relatively low gas nozzle pressures can result in supersonic flow in the jet with its associated shock fronts. When the nozzle is placed at conventional distances (1-2mm) above the workpiece, the force exerted by the gas on the workpiece and the cut products (the cutting pressure) can be significantly less than the nozzle pressure. Higher cutting pressures can be achieved by increasing the height of the nozzle above the workpiece, to a more damage resistant zone, provided that the shock structure of the jet is taken into account. Conventional conical nozzles with circular exits can be operated with conditions that will result in cutting pressures up to 3 Bar (g) in the more distant zone. At higher pressures in circular tipped nozzles the cutting pressure in this zone decays to inadequate levels. Investigations of a large number of non-circular nozzle tip shapes have resulted in the selection of a few specific shapes that can provide cutting pressures in excess of 6 Bar(g) at distances of 4 to 7mm from the nozzle tip. Since there is a strong correlation between cutting pressure and the speed and quality of laser cutting, the paper describes the aerodynamic requirements for achieving the above effects and reports the cutting results arising from the different nozzle designs and conditions. The results of the work of other investigators, who report anomalous laser cutting results, will be examined and reviewed in the light of the above work.

Cutting system for burnable poison rod

International Nuclear Information System (INIS)

Shiina, Atsushi; Toyama, Norihide; Koshino, Yasuo; Fujii, Toshio

1989-01-01

Burnable poison rods attached to spent fuels are contained in a containing box and transported to a receiving pool. The burnable poison rod-containing box is provisionally situated by the operation to a handling device to a provisional setting rack in a cutting pool and attached to a cutting guide of a cutting device upon cutting. The burnable poison rod is cut only in a cutting pool water and tritium generated upon cutting is dissolved into the cutting pool water. Diffusion of tritium is thus restricted. Further, the cutting pool is isolated by a partition device from the receiving pool during cutting of the burnable poison rod. Accordingly, water in which tritium is dissolved is inhibited from moving to the receiving pool and prevail of tritium contamination can be avoided. (T.M.)

Drought priming at vegetative growth stages improves tolerance to drought and heat stresses occurring during grain filling in spring wheat

DEFF Research Database (Denmark)

Wang, Xiao; Vignjevic, Marija; Liu, Fulai

2015-01-01

Plants of spring wheat (Triticum aestivum L. cv. Vinjett) were exposed to moderate water deficit at the vegetative growth stages six-leaf and/or stem elongation to investigate drought priming effects on tolerance to drought and heat stress events occurring during the grain filling stage. Compared......Plants of spring wheat (Triticum aestivum L. cv. Vinjett) were exposed to moderate water deficit at the vegetative growth stages six-leaf and/or stem elongation to investigate drought priming effects on tolerance to drought and heat stress events occurring during the grain filling stage...... of abscisic acid in primed plants under drought stress could contribute to higher grain yield compared to the non-primed plants. Taken together, the results indicate that drought priming during vegetative stages improved tolerance to both drought and heat stress events occurring during grain filling in wheat....

A Time Series Study of Lophelia pertusa and Reef Megafauna Responses to Drill Cuttings Exposure on the Norwegian Margin.

Directory of Open Access Journals (Sweden)

Autun Purser

Full Text Available As hotspots of local biodiversity in the deep sea, preservation of cold-water coral reef communities is of great importance. In European waters the most extensive reefs are found at depths of 300 - 500 m on the continental margin. In Norwegian waters many of these reefs are located in areas of interest for oil and gas exploration and production. In this study drilling was carried out in the Morvin drill field in proximity to a number of small Lophelia pertusa coral reefs (closest reefs 100 m upstream and 350 m downstream of point of waste drill material release. In a novel monitoring study, ROV video surveys of 9 reefs were conducted prior, during, immediately after and >1 year after drilling operations. Behavior of coral polyps inhabiting reefs exposed to differing concentrations of drill cuttings and drilling fluids (waste drilling material were compared. Levels of expected exposure to these waste materials were determined for each reef by modelling drill cutting transport following release, using accurate in-situ hydrodynamic data collected during the drilling period and drill cutting discharge data as parameters of a dispersal model. The presence / absence of associate reef species (Acesta excavata, Paragorgia arborea and Primnoa resedaeformis were also determined from each survey video. There were no significant differences in Lophelia pertusa polyp behavior in corals modelled to have been exposed to pulses of >25 ppm drill cutting material and those modelled to be exposed to negligible concentrations of material. From the video data collected, there were no observed degradations of reef structure over time, nor reductions of associate fauna abundance, regardless of modelled exposure concentration at any of the surveyed reefs. This study focused exclusively on adult fauna, and did not assess the potential hazard posed by waste drilling material to coral or other larvae. Video data was collected by various ROV's, using different camera and

A risk modelling approach for setting process hygiene criteria for Salmonella in pork cutting plants, based on enterococci

DEFF Research Database (Denmark)

Bollerslev, Anne Mette; Hansen, Tina Beck; Nauta, Maarten

2015-01-01

Pork is known to be a key source of foodborne salmonellosis. Processing steps from slaughter to cutting and retail contribute to the Salmonella consumer exposure. In two extensive surveys comprising a total of 5,310 pork samples, cuttings and minced meat were analysed semiquantitatively for Salmo......Pork is known to be a key source of foodborne salmonellosis. Processing steps from slaughter to cutting and retail contribute to the Salmonella consumer exposure. In two extensive surveys comprising a total of 5,310 pork samples, cuttings and minced meat were analysed semiquantitatively...... for Salmonella and quantitatively for the hygiene indicator enterococci. The samples were collected in 2001/2002 and 2010/2011 in Danish cutting plants, retail supermarkets and butcher shops. A positive correlation between prevalence of Salmonella and number of enterococci was shown (Hansen et al., 2013......). As enterococci and Salmonella share a lower growth limit around 5°C, the positive correlation could imply that the meat had been exposed to temperatures above 5°C. Based on these findings, the objective of this study was to develop an approach for setting process hygiene criteria for predicting Salmonella risk...

Study of Maowusu Sandy Land Vegetation Coverage Change Based on Modis Ndvi

Science.gov (United States)

Ye, Q.; Liu, H.; Lin, Y.; Han, R.

2018-04-01

This paper selected 2006-2016 MODIS NDVI data with a spatial resolution of 500m and time resolution of 16d, got the 11 years' time series NDVI data of Maowusu sandy land through mosaicking, projection transformation, cutting process in batch. Analysed the spatial and temporal distribution and variation characteristics of vegetation cover in year, season and month time scales by maximum value composite, and unary linear regression analysis. Then, we combined the meteorological data of 33 sites around the sandy area, analysed the response characteristics of vegetation cover change to temperature and precipitation through Pearson correlation coefficient. Studies have shown that: (1) The NDVI value has a stable increase trend, which rate is 0.0075 / a. (2) The vegetation growth have significantly difference in four seasons, the NDVI value of summer > autumn > spring > winter. (3) The NDVI value change trend is conformed to the gauss normal distribution in a year, and it comes to be largest in August, its green season is in April, and yellow season is in the middle of November, the growth period is about 220 d. (4) The vegetation has a decreasing trend from the southeast to the northwest, most part is slightly improved, and Etuokeqianqi improved significantly. (5) The correlation indexes of annual NDVI with temperature and precipitation are -0.2178 and 0.6309, the vegetation growth is mainly affected by precipitation. In this study, a complete vegetation cover analysis and evaluation model for sandy land is established. It has important guiding significance for the sand ecological environment protection.

Sanitation Can Be A Foundation Disease Management Tool: Potential Of Spreading Binucleate Rhizoctonia from Nursery Propagation Floors To Trays Containing Azalea Stem Cuttings

Science.gov (United States)

Binucelate Rhizoctonia spp. (BNR), the cause of web blight, are present all year on container-grown azaleas in the southern U.S. BNR can be eliminated during vegetative propagation by submerging stem cuttings in 50°C water for 21 minutes. The objective was to evaluate risk of rooting trays being con...

Theoretical Models for Orthogonal Cutting

DEFF Research Database (Denmark)

De Chiffre, Leonardo

This review of simple models for orthogonal cutting was extracted from: “L. De Chiffre: Metal Cutting Mechanics and Applications, D.Sc. Thesis, Technical University of Denmark, 1990.”......This review of simple models for orthogonal cutting was extracted from: “L. De Chiffre: Metal Cutting Mechanics and Applications, D.Sc. Thesis, Technical University of Denmark, 1990.”...

Laser circular cutting of Kevlar sheets: Analysis of thermal stress filed and assessment of cutting geometry

Science.gov (United States)

Yilbas, B. S.; Akhtar, S. S.; Karatas, C.

2017-11-01

A Kevlar laminate has negative thermal expansion coefficient, which makes it difficult to machine at room temperaures using the conventional cutting tools. Contararily, laser machining of a Kevlar laminate provides advantages over the conventional methods because of the non-mechanical contact between the cutting tool and the workpiece. In the present study, laser circular cutting of Kevlar laminate is considered. The experiment is carried out to examine and evaluate the cutting sections. Temperature and stress fields formed in the cutting section are simulated in line with the experimental study. The influence of hole diameters on temperature and stress fields are investigated incorporating two different hole diameters. It is found that the Kevlar laminate cutting section is free from large size asperities such as large scale sideways burnings and attachemnt of charred residues. The maximum temperature along the cutting circumference remains higher for the large diameter hole than that of the small diameter hole. Temperature decay is sharp around the cutting section in the region where the cutting terminates. This, in turn, results in high temperature gradients and the thermal strain in the cutting region. von Mises stress remains high in the region where temperature gradients are high. von Mises stress follows similar to the trend of temperature decay around the cutting edges.

Breve revisión sobre características de la cutícula vegetal y penetración de herbicidas

Directory of Open Access Journals (Sweden)

María del C. Lallana

2006-01-01

Full Text Available Se presenta una breve revisión sobre las características de la cutícula de las plantas y su relación con la penetración de los herbicidas, así como los factores que afectan dicha penetración. Se tienen en cuenta aspectos estructurales, como características de las ceras de la cutícula, y ambientales que determinan la correcta absorción de los herbicidas. Se hace referencia a los estudios realizados sobre Eryngium horridum, la presencia de estomas y la penetración diferencial de los herbicidas en el haz y en el envés de las hojas.

REPEATABILITY OF THE FRENCH HIGHER VEGETATION TYPES ACCORDING

Directory of Open Access Journals (Sweden)

H. BRISSE

1998-04-01

Full Text Available Higher vegetation types are generally determined by successive approximations and defined by a common consent. Instead, they might be statistically determined and repeated, according to a numerical method called ‘socio-ecology’. This method deals only with floristical data, but gives them an ecological meaning by a previous calibration of the relations between plants, computed as ecological indices. It is applied to a pair of two homologous samples, each having 2.000 relevés and coming from the 60.000 relevés stored in the French data bank ‘Sophy’. Each sample covers the main ecological gradients of the bank, it defines a hierarchy of vegetation types and it explains half the peculiarity of a type with only 10 to 30 discriminant plants, out of the 5.000 plants observed in the relevés. Results : 1 The discriminant plants may characterize the vegetation types, including the higher ones, in a coherent and readable form. 2 In the two independent classifications, having different structures, the same vegetation types are repeated. They are the reciprocal nearest types, in the socio-ecological space. Though the two classifications have no one relevé in common, the repeated types have nearly the same discriminant plants. 3 At the highest level, two clear-cut main types show the difference between light and shadow. The same herbaceous discriminant plants, for a type, and the ligneous or sciaphilous ones, for the other, have similar fidelities and constancies in the two classifications. 4 Such a numerical agreement, instead of common consent, appears again in the sub-types, which remind the classical ones, but which are repeatable.

Ecosystem response to removal of exotic riparian shrubs and a transition to upland vegetation

Science.gov (United States)

Reynolds, Lindsay V.; Cooper, David J.

2011-01-01

Understanding plant community change over time is essential for managing important ecosystems such as riparian areas. This study analyzed historic vegetation using soil seed banks and the effects of riparian shrub removal treatments and channel incision on ecosystem and plant community dynamics in Canyon de Chelly National Monument, Arizona. We focused on how seeds, nutrients, and ground water influence the floristic composition of post-treatment vegetation and addressed three questions: (1) How does pre-treatment soil seed bank composition reflect post-treatment vegetation composition? (2) How does shrub removal affect post-treatment riparian vegetation composition, seed rain inputs, and ground water dynamics? and (3) Is available soil nitrogen increased near dead Russian olive plants following removal and does this influence post-treatment vegetation? We analyzed seed bank composition across the study area, analyzed differences in vegetation, ground water levels, and seed rain between control, cut-stump and whole-plant removal areas, and compared soil nitrogen and vegetation near removed Russian olive to areas lacking Russian olive. The soil seed bank contained more riparian plants, more native and fewer exotic plants than the extant vegetation. Both shrub removal methods decreased exotic plant cover, decreased tamarisk and Russian olive seed inputs, and increased native plant cover after 2 years. Neither method increased ground water levels. Soil near dead Russian olive trees indicated a short-term increase in soil nitrogen following plant removal but did not influence vegetation composition compared to areas without Russian olive. Following tamarisk and Russian olive removal, our study sites were colonized by upland plant species. Many western North American rivers have tamarisk and Russian olive on floodplains abandoned by channel incision, river regulation or both. Our results are widely applicable to sites where drying has occurred and vegetation

A study of estimating cutting depth for multi-pass nanoscale cutting by using atomic force microscopy

International Nuclear Information System (INIS)

Lin, Zone-Ching; Hsu, Ying-Chih

2012-01-01

This paper studies two models for estimating cutting depth of multi-pass nanoscale cutting by using an atomic force microscopy (AFM) probe. One estimates cutting depth for multi-pass nanoscale cutting by using regression equations of nanoscale contact pressure factor (NCP factor) while the other uses equation of specific down force energy (SDFE). This paper proposes taking a diamond-coated probe of AFM as the cutting tool to carry out multi-pass nanoscale cutting experiments on the surface of sapphire substrate. In the process of experimentation, different down forces are set, and the probe shape of AFM is known, then using each down force to multi-pass cutting the sapphire substrate. From the measured experimental data of a central cutting depth of the machining groove by AFM, this paper calculates the specific down force energy of each down force. The experiment results reveal that the specific down force energy of each case of multi-pass nanoscale cutting for different down forces under a probe of AFM is close to a constant value. This paper also compares the nanoscale cutting results from estimating cutting depths for each pass of multi-pass among the experimental results and the calculating results obtained by the two theories models. It is found that the model of specific down force energy can calculate cutting depths for each nanoscale cutting pass by one equation. It is easier to use than the multi-regression equations of the nanoscale contact pressure factor. Besides, the estimations of cutting depth results obtained by the model of specific down force energy are closer to that of the experiment results. It shows that the proposed specific down force energy model in this paper is an acceptable model.

Consumer evaluation of palatability characteristics of a beef value-added cut compared to common retail cuts.

Science.gov (United States)

Lepper-Blilie, A N; Berg, E P; Germolus, A J; Buchanan, D S; Berg, P T

2014-01-01

The objectives of this study were to educate consumers about value-added beef cuts and evaluate their palatability responses of a value cut and three traditional cuts. Three hundred and twenty-two individuals participated in the beef value cut education seminar series presented by trained beef industry educators. Seminar participants evaluated tenderness, juiciness, flavor, and overall like of four samples, bottom round, top sirloin, ribeye, and a value cut (Delmonico or Denver), on a 9-point scale. The ribeye and the value cut were found to be similar in all four attributes and differed from the top sirloin and bottom round. Correlations and regression analysis found that flavor was the largest influencing factor for overall like for the ribeye, value cut, and top sirloin. The value cut is comparable to the ribeye and can be a less expensive replacement. © 2013.

Long storage stability of biodiesel from vegetable and used frying oils

Energy Technology Data Exchange (ETDEWEB)

Abderrahim Bouaid; Mercedes Martinez; Jose Aracil [Complutense University, Madrid (Spain). Department of Chemical Engineering

2007-11-15

Biodiesel is defined as the mono-alkyl esters of vegetable oils. Production of biodiesel has grown tremendously in European Union in the last years. Though the commercial prospects for biodiesel have also grown, there remains some concern with respect to its resistance to oxidative degradation during storage. Due to the chemical structure of biodiesel the presence of the double bond in the molecule produce a high level of reactivity with the oxygen, especially when it placed in contact with air. Consequently, storage of biodiesel over extended periods may lead to degradation of fuel properties that can compromise fuel quality. This study used samples of biodiesel prepared by the process of transesterification from different vegetable oils: high oleic sunflower oil (HOSO), high and low erucic Brassica carinata oil (HEBO and LEBO) respectively and used frying oil (UFO). These biodiesels, produced from different sources, were used to determine the effects of long storage under different conditions on oxidation stability. Samples were stored in white (exposed) and amber (not exposed) glass containers at room temperature. The study was conducted for a period of 30-months. At regular intervals, samples were taken to measure the following physicochemical quality parameters: acid value (AV), peroxide value (PV), viscosity {nu}, iodine value (IV) and insoluble impurities (II). Results showed that AV, PV, {nu} and II increased, while IV decreased with increasing storage time of biodiesel samples. However, slight differences were found between biodiesel samples exposed and not exposed to daylight before a storage time of 12 months. But after this period the differences were significant. 22 refs., 5 figs., 3 tabs.

Flux cutting in superconductors

International Nuclear Information System (INIS)

Campbell, A M

2011-01-01

This paper describes experiments and theories of flux cutting in superconductors. The use of the flux line picture in free space is discussed. In superconductors cutting can either be by means of flux at an angle to other layers of flux, as in longitudinal current experiments, or due to shearing of the vortex lattice as in grain boundaries in YBCO. Experiments on longitudinal currents can be interpreted in terms of flux rings penetrating axial lines. More physical models of flux cutting are discussed but all predict much larger flux cutting forces than are observed. Also, cutting is occurring at angles between vortices of about one millidegree which is hard to explain. The double critical state model and its developments are discussed in relation to experiments on crossed and rotating fields. A new experiment suggested by Clem gives more direct information. It shows that an elliptical yield surface of the critical state works well, but none of the theoretical proposals for determining the direction of E are universally applicable. It appears that, as soon as any flux flow takes place, cutting also occurs. The conclusion is that new theories are required. (perspective)

Development of underwater laser cutting technology

International Nuclear Information System (INIS)

Sato, Seiichi; Inaba, Takanori; Inose, Koutarou; Matsumoto, Naoyuki; Sakakibara, Yuji

2015-01-01

In is desirable to use remote underwater device for the decommissioning work of highly radioactive components such as the nuclear internals from a view point of reducing the ranitidine exposure to the worker. Underwater laser cutting technology has advantages. First advantage in underwater laser cutting technology is that low reaction force during cutting, namely, remote operability is superior. Second point is that underwater laser cutting generates a little amount of secondary waste, because cutting kerf size is very small. Third point is that underwater laser cutting has low risk of the process delay, because device trouble is hard to happen. While underwater laser cutting has many advantages, the careful consideration in the safe treatment of the offgas which underwater laser cutting generates is necessary. This paper describes outline of underwater laser cutting technology developed by IHI Corporation (IHI) and that this technology is effective in various dismantling works in water. (author)

PERBANYAKAN VEGETATIF BIDARA UPAS (Merremia Mammosa (Lour.) Hallier F) KEBUN RAYA BOGOR [Vegetative Propagation of Bidara Upas ( Merremia Mammosa (Lour.) Hallier F)) at Bogor Botanical Garden

OpenAIRE

Cahyaningsih, Ria; Hidayat, Syamsul; Hidayat, Endang

2017-01-01

Bidara upas (Merremia mammosa (Lour.) Hall.f.) is a medicinal plant, , that traditionaly use by Indonesian and Malaysian people. Regarding Indonesia Biodiversity Strategy and Action Plan released by The National Development Planning Agency, it is included in the extinct medicinal plant list (2003). As the center for plant conservation, Bogor botanical garden conducted vegetative propagation study on this plant by air layering, cutting, and tuber cutting. The aim to this study is to find effec...

Artificial stone dust-induced functional and inflammatory abnormalities in exposed workers monitored quantitatively by biometrics.

Science.gov (United States)

Ophir, Noa; Shai, Amir Bar; Alkalay, Yifat; Israeli, Shani; Korenstein, Rafi; Kramer, Mordechai R; Fireman, Elizabeth

2016-01-01

The manufacture of kitchen and bath countertops in Israel is based mainly on artificial stone that contains 93% silica as natural quartz, and ∼3500 workers are involved in cutting and processing it. Artificial stone produces high concentrations of silica dust. Exposure to crystalline silica may cause silicosis, an irreversible lung disease. Our aim was to screen exposed workers by quantitative biometric monitoring of functional and inflammatory parameters. 68 exposed artificial stone workers were compared to 48 nonexposed individuals (controls). Exposed workers filled in questionnaires, and all participants underwent pulmonary function tests and induced sputum analyses. Silica was quantitated by a Niton XL3 X-ray fluorescence spectrometer. Pulmonary function test results of exposed workers were significantly lower and induced sputa showed significantly higher neutrophilic inflammation compared to controls; both processes were slowed down by the use of protective measures in the workplace. Particle size distribution in induced sputum samples of exposed workers was similar to that of artificial stone dust, which contained aluminium, zirconium and titanium in addition to silica. In conclusion, the quantitation of biometric parameters is useful for monitoring workers exposed to artificial stone in order to avoid deterioration over time.

Encouraging children to eat more fruit and vegetables: Health vs. descriptive social norm-based messages.

Science.gov (United States)

Sharps, Maxine; Robinson, Eric

2016-05-01

Traditional intervention approaches to promote fruit and vegetable consumption outline the health benefits of eating fruit and vegetables. More recently, social norm-based messages describing the healthy eating habits of others have been shown to increase fruit and vegetable intake in adults. Here we report two experimental studies which investigated whether exposure to descriptive social norm-based messages about the behaviour of other children and health-based messages increased fruit and vegetable intake in young children. In both studies children were exposed to messages whilst playing a board-game. After exposure to the messages, children were able to consume fruit and vegetables, as well as high calorie snack foods. Although findings were inconsistent across the two individual studies, in a pooled analysis we found evidence that both health messages and descriptive social norm-based messages increased children's fruit and vegetable intake, relative to control condition messages (p norm-based messages can be used to promote meaningful changes to children's dietary behaviour warrants further study. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

L-ascorbic acid losses in Kenyan vegetables during cooking as determined by high performance liquid chromatography

Directory of Open Access Journals (Sweden)

N.M.N. Wekesa

2001-06-01

Full Text Available The loss of L-ascorbic acid (L-AA in 14 different cooked local vegetables found in Nairobi markets was determined by high performance liquid chromatography. The effect of quantity of water on the loss of L-AA during cooking was studied with cowpea leaves. It was found that more L-AA was lost when larger amount of water was used than when smaller amount was used. The effect of the sharpness of the knife on the loss of L-AA was studied with spinach. It was found that more loss of L-AA occurred when a blunt (edge thickness 0.08 cm knife was used for cutting the vegetables than when a sharp knife (edge thickness 0.04 cm was used during cooking. L-AA was also determined when vegetables were cooked in different size pieces (surface are >1 cm2

Cutting temperature measurement and material machinability

Directory of Open Access Journals (Sweden)

Nedić Bogdan P.

2014-01-01

Full Text Available Cutting temperature is very important parameter of cutting process. Around 90% of heat generated during cutting process is then away by sawdust, and the rest is transferred to the tool and workpiece. In this research cutting temperature was measured with artificial thermocouples and question of investigation of metal machinability from aspect of cutting temperature was analyzed. For investigation of material machinability during turning artificial thermocouple was placed just below the cutting top of insert, and for drilling thermocouples were placed through screw holes on the face surface. In this way was obtained simple, reliable, economic and accurate method for investigation of cutting machinability.

Stresses in ultrasonically assisted bone cutting

International Nuclear Information System (INIS)

Alam, K; Mitrofanov, A V; Silberschmidt, V V; Baeker, M

2009-01-01

Bone cutting is a frequently used procedure in the orthopaedic surgery. Modern cutting techniques, such as ultrasonic assisted drilling, enable surgeons to perform precision operations in facial and spinal surgeries. Advanced understanding of the mechanics of bone cutting assisted by ultrasonic vibration is required to minimise bone fractures and to optimise the technique performance. The paper presents results of finite element simulations on ultrasonic and conventional bone cutting analysing the effects of ultrasonic vibration on cutting forces and stress distribution. The developed model is used to study the effects of cutting and vibration parameters (e.g. amplitude and frequency) on the stress distributions in the cutting region.

Optimisation Of Cutting Parameters Of Composite Material Laser Cutting Process By Taguchi Method

Science.gov (United States)

Lokesh, S.; Niresh, J.; Neelakrishnan, S.; Rahul, S. P. Deepak

2018-03-01

The aim of this work is to develop a laser cutting process model that can predict the relationship between the process input parameters and resultant surface roughness, kerf width characteristics. The research conduct is based on the Design of Experiment (DOE) analysis. Response Surface Methodology (RSM) is used in this work. It is one of the most practical and most effective techniques to develop a process model. Even though RSM has been used for the optimization of the laser process, this research investigates laser cutting of materials like Composite wood (veneer)to be best circumstances of laser cutting using RSM process. The input parameters evaluated are focal length, power supply and cutting speed, the output responses being kerf width, surface roughness, temperature. To efficiently optimize and customize the kerf width and surface roughness characteristics, a machine laser cutting process model using Taguchi L9 orthogonal methodology was proposed.

Selection of Near Optimal Laser Cutting Parameters in CO2 Laser Cutting by the Taguchi Method

Directory of Open Access Journals (Sweden)

Miloš MADIĆ

2013-12-01

Full Text Available Identification of laser cutting conditions that are insensitive to parameter variations and noise is of great importance. This paper demonstrates the application of Taguchi method for optimization of surface roughness in CO2 laser cutting of stainless steel. The laser cutting experiment was planned and conducted according to the Taguchi’s experimental design using the L27 orthogonal array. Four laser cutting parameters such as laser power, cutting speed, assist gas pressure, and focus position were considered in the experiment. Using the analysis of means and analysis of variance, the significant laser cutting parameters were identified, and subsequently the optimal combination of laser cutting parameter levels was determined. The results showed that the cutting speed is the most significant parameter affecting the surface roughness whereas the influence of the assist gas pressure can be neglected. It was observed, however, that interaction effects have predominant influence over the main effects on the surface roughness.

Is repeated exposure the holy grail for increasing children's vegetable intake? Lessons learned from a Dutch childcare intervention using various vegetable preparations.

Science.gov (United States)

Zeinstra, Gertrude G; Vrijhof, Milou; Kremer, Stefanie

2018-02-01

Children's failure to eat enough vegetables highlights the need for effective interventions encouraging this behaviour. The aim of this study was to investigate the effect of repeated exposure to three a priori unfamiliar vegetables, each prepared in two ways, on children's vegetable acceptance in a childcare setting. Two hundred fifty children (mean age 25 months; 57% boys) participated in a pre-test and a post-test, where they were offered pumpkin, courgette, and white radish. The intervention group (N = 125) participated in a 5-month exposure period, where they were exposed repeatedly (∼12x) to the vegetables: pumpkin blanched and as a cracker spread; courgette blanched and as soup; white radish raw and as a cracker spread. The control group (N = 125) maintained their normal routine. Mixed model analyses were used to analyse intake data and Chi-square analyses for willingness to taste. At pre-test, children ate about 20 g of pumpkin and courgette, whereas white radish intake was approximately 10 g. There was a significant positive effect of the intervention for pumpkin (+15 g; p < 0.001) and white radish (+16 g; p = 0.01). Results for willingness to taste were in the same direction. There was no repeated exposure effect for courgette (p = 0.54); this may have been due to its less distinct taste profile or familiarity with boiled courgette. From our findings, we conclude that repeated exposure to multiple unfamiliar vegetable tastes within the daily routine of a childcare setting is effective in improving children's willingness to taste and intake of some of these vegetables. However, repeated exposure may not be sufficient for more familiar or blander tasting vegetables. This implies that one size does not fit all and that additional strategies are needed to increase children's intake of these vegetables. Copyright © 2017 Elsevier Ltd. All rights reserved.

How Can I Stop Cutting?

Science.gov (United States)

... Educators Search English Español How Can I Stop Cutting? KidsHealth / For Teens / How Can I Stop Cutting? ... in a soft, cozy blanket Substitutes for the Cutting Sensation You'll notice that all the tips ...

Occurrence of shrubs and herbaceous vegetation after clear cutting old-growth Douglas-fir in the Oregon Cascades.

Science.gov (United States)

Vern P. Yerkes

1960-01-01

Land managers often express a need for more complete information about the vegetative cover that develops on cutover areas between harvest of old-growth Douglas-fir (Pseudotsuga menziesii) and establishment of a young-growth forest. The composition and density of this cover frequently determines the management techniques that must be used to...

Development of lathe tool dynamometer and finding cutting forces using negative and positive rake angle cutting tool

International Nuclear Information System (INIS)

Zeb, M.A.; Irfan, M.A.

2005-01-01

Most output parameters in machining, such as cutting forces, temperatures, strains and the work-hardening of the chip material, are directly related to the chip formation process. The characteristics of machining processes can be well understood if the forces and strains during chip formation are known. In this research a lathe tool dynamometer was used to measure cutting forces involved in machining of Steel 1045 and Aluminum 2219 T62. High Speed Steel (HSS), cutting tools with positive and negative rake angles were used. It was observed that more cutting forces are experienced by the cutting tool with positive rake angle as compared to the forces experienced by the cutting tool with negative rake angle. For steel 1045 the cutting forces using positive rake angle cutting tool were much higher. This suggested that for harder materials using a negative rake angle is more suitable for cutting. (author)

Effects of organic, biological and chemical fertilizers on vegetative indices and essential oil content of coriander (Coriandrum sativum L.

Directory of Open Access Journals (Sweden)

M Aghhavani Shajari

2016-05-01

Full Text Available This experiment was conducted to study the effects of single and combined application of organic, biological and chemical fertilizers on qualitative and quantitative characteristics of vegetative part of coriander, (Coriandrum sativum L.. The experiment was carried out as split plot in time based on Complete Randomized Block Design with three replications and 12 treatments at Research Station, Faculty of Agriculture, Ferdowsi University of Mashhad, Iran, during growing season of 2010-2011. Treatments included: (1 mycorrhiza (Glomus mosseae, (2 biosulfur (Thiobacillus sp., (3 chemical fertilizer (NPK, (4 cow manure, (5 vermicompost, (6 mycorrhiza + chemical fertilizer, (7 mycorrhiza + cow manure, (8 mycorrhiza + vermicompost, (9 biosulfur + chemical fertilizer, (10 biosulfur + cow manure, (11 biosulfur + vermicompost and (12 control. Vegetative parts of coriander were cut at 5% of flowering stage in two dates (19 May and 5 June. Results showed that the highest plant height (28 cm and lateral branches (5.2 were obtained in combined application of biosulfur with cow manure treatment. The highest fresh and dry leaf weight, fresh and dry matter yield and stem dry matter weight were obtained in single application of chemical fertilizer. Single application of biosulfur increased leaf/stem ratio. The highest essential oil percentage and essential oil yield were observed in cow manure treatment (0.2% and 1753 g.ha-1, respectively. The maximum leaf/stem ratio were observed in the first cutting, while the highest lateral branches, stem fresh and dry matter yield, essential oil percentage and essential oil yield were obtained in second cut. Overall, results of this study showed that the plant vegetative yield increased by using chemical fertilizer, while essential oil percentage and essential oil yield of coriander were improved by using organic and biological fertilizers.

Changes of trace element concentrations in vegetables during the usual food processing in the household found out by means of activation analysis

International Nuclear Information System (INIS)

Schelenz, R.

1981-01-01

The influence of processing of various vegetables and potatoes (cleaning, cutting, washing, cooking, steam-cooking) on the concentration of ingestion-physiologically important mineral- and trace elements has been studied by means of instrumental activation analysis. The leaching effects play a less important role in steam-cooking. Than in normal cooking. The most important loss already occurs when preparing the vegetables for cooking. This applies especially also to the essential trace elements; but also toxic elements such as arsenic are greatly reduced during this process. (RB) [de

Investigation of Physical Phenomena and Cutting Efficiency for Laser Cutting on Anode for Li-Ion Batteries

Directory of Open Access Journals (Sweden)

Dongkyoung Lee

2018-02-01

Full Text Available Lithium-ion batteries have a higher energy density than other secondary batteries. Among the lithium-ion battery manufacturing process, electrode cutting is one of the most important processes since poor cut quality leads to performance degradation, separator protrusion, and local electric stress concentration. This may, eventually, lead to malfunction of lithium-ion batteries or explosion. The current mechanical cutting technology uses a contact process and this may lead to process instability. Furthermore, there are additional costs if the tools and cell design are changed. To solve these issues, laser cutting has been used. Conventional dependent parameters have limitations in investigating and explaining many physical phenomena during the laser cutting of electrodes. Therefore, this study proposes specific widths such as melting, top, and kerf width. Moreover, the relationship between laser parameters and multiphysical phenomena with the proposed widths are investigated. Five types of classification with regard to physical phenomena are presented and explained with SEM images. Cutting efficiency is estimated with the proposed widths. The proposed specific cutting widths, five types of geometrical classification, and cutting efficiency can be used as standardized parameters to evaluate the cutting quality.

CALCULATION OF LASER CUTTING COSTS

OpenAIRE

Bogdan Nedic; Milan Eric; Marijana Aleksijevic

2016-01-01

The paper presents description methods of metal cutting and calculation of treatment costs based on model that is developed on Faculty of mechanical engineering in Kragujevac. Based on systematization and analysis of large number of calculation models of cutting with unconventional methods, mathematical model is derived, which is used for creating a software for calculation costs of metal cutting. Software solution enables resolving the problem of calculating the cost of laser cutting, compar...

Method of cutting radioactivated metal structures

International Nuclear Information System (INIS)

Takimoto, Yoshinori; Sakota, Kotaro; Hamamoto, Noboru; Harada, Keizo.

1985-01-01

Purpose: To improve the cutting performance to a level as comparable with that in air, as well as prevent the scattering of the radioactive materials upon cutting to the level as that in water cutting. Method: After igniting a gas cutting torch automatically, water spray by the local water sprayer is started by the actuation of a submerged pump, while a gas cutting manipulator is operated to cut the nuclear reactor pressure vessel. In this way, cutting exhaust gases resulted from the gas cutting torch are water-washed by the spray from the local water sprayer and falls within the nuclear rector pressure vessel in the form of water streams or droplets along the inner wall surface of the pressure vessel. Further, water is fed again to the local water sprayer by the submerged pump. (Kawakami, Y.)

Laser Cutting of Thin Nickel Bellows

Science.gov (United States)

Butler, C. L.

1986-01-01

Laser cutting technique produces narrow, precise, fast, and repeatable cuts in thin nickel-allow bellows material. Laser cutting operation uses intense focused beam to melt material and assisting gas to force melted material through part thickness, creating void. When part rotated or moved longitudinally, melting and material removal continuous and creates narrow, fast, precise, and repeatable cut. Technique used to produce cuts of specified depths less than material thickness. Avoids distortion, dents, and nicks produced in delicate materials during lathe trimming operations, which require high cutting-tool pressure and holding-fixture forces.

Importance of Seed Quality for the Fresh-cut Chain

DEFF Research Database (Denmark)

Deleuran, Lise Christina; Olesen, Merete Halkjær; Shetty, Nisha

2011-01-01

Seed is the most fundamental input in vegetable production on, which the effectiveness of other inputs and outputs depends. If the seed is of poor quality, the use of other inputs is less successful and will occasionally be irrelevant. A definition of seed quality will depend upon the use for......, which the seed is intended. Viability, vigor, uniformity, purity and health of the seeds are quality parameters important for all production systems. The ideal situation for both fresh produce and fresh cut would be seeds, which germinate uniform at a high percentage and subsequently grow relatively...... fast to the desired size, thus, resulting in leaves of improved quality. It is likely that such leaves will be more able to withstand the rigorous processing that includes harvest, transportation, washing, sanitization, de-watering and packaging. This ideal situation would both be determined...

Experimental improvement of the technology of cutting of high-pressure hoses with metal braid on hand cutting machine

OpenAIRE

Karpenko, Mykola; Bogdevicius, Marijonas; Prentkovskis, Olegas

2016-01-01

In the article the review of the problem of improvement of technology of high pressure hoses cutting on the hand cutting machines is analyzed. Different methods of cutting of high pressure hoses into the billets are overviewed and the quality of edge cuts of hoses is analyzed. The comparison of treatment on automatic cutting machines and on hand cutting machines is carried out. Different experimental techniques of improvement of the quality of edges cutting of high pressure hoses are prese...

The impact of cattle and goats grazing on vegetation in oak stands of varying coppicing age

Science.gov (United States)

Papachristou, Thomas G.; Platis, Panayiotis D.

2011-01-01

The effects of cattle and goats grazing on oak shoot growth and herbaceous vegetation in three oak forest stands with different coppicing age (1, 4 and 7 yrs after the clear cutting) were investigated. In April 1997, an experimental area was chosen with three forest stands, which were clear cut in 1996 (CL1996), 1993 (CL1993), and 1990 (CL1990). All stands were grazed by cattle and goats after they were clear cut. In each forest stand, five 10 m × 10 m paired plots were located, which represented grazed and protected patches. Herbage biomass within protected and grazed plots was measured four times each year (spring: May-June, summer: July-August, autumn: September-October, and winter: November-December). Behavioural observations on grazing animals were conducted in the same periods. In both protected and open plots the height and basal diameter of all oak shoots on 5 preselected stumps were measured at the end of five growing periods from 1997 to 2001. All forest stands carried a similar amount of available herbage (averaged over forest stands and growing season, 2614 kg/ha). Grazing animals removed on average 1057 kg/ha throughout the growing period. Cattle mainly consumed herbage (97% of bites) while goats consumed a mixture of oak browse (41% bites), herbaceous species (34% bites), and other woody species browse (25% bites). The height, diameter and volume of oak shoots were affected by grazing. The three forest stands had similar shoot heights in the protected plots in 2001 after 5 years of grazing protection. The volume of oak shoots of the grazed plots were 146.7 cm3 for CL1996, 232.9 cm3 for CL1993, and 239.1 cm3 for CL1990 in 2001 (i.e. 5, 8, and 11 years grazing after the clear cuttings, respectively). The protected plots carried greater volumes of oak shoots, CL1996: 496.0 cm3 (few months grazing before protection), CL1993: 690.0 cm3 (4 years grazing before protection), and CL1990: 344.0 cm3 (7 years grazing before protection). In conclusion, almost

Response of shortgrass Plains vegetation to chronic and seasonally administered gamma radiation

Energy Technology Data Exchange (ETDEWEB)

Fraley, Jr., Leslie [Colorado State Univ., Fort Collins, CO (United States)

1971-08-01

In order to determine the effect of radiation on the structure of native shortgrass plains vegetation, an 8750 Ci 137Cs source was installed on the Central Plains Experimental Range near Nunn, Colorado; The experimental area was divided into 6 treatment sectors, a control, 2 sectors for chronic exposure (irradiation initiated April 1969 and continuing as of August 1971), and one each for spring, summer and late fall seasonal semi-acute (30 day), exposures which were administered during April, July and December, 1969, respectively. Community structure was measured by coefficient of community and diversity index. Yield was determined by clipping plots in September 1970 and visual estimates in September 1969 and 1970 for the grass-sedge component of the vegetation. Individual species sensitivity was determined by density data recorded in April, June and September of 1969 and 1970 and by a phenological index recorded at weekly intervals during the 1969 and 1970 growing seasons. The response of the vegetation was similar whether determined by coefficient of community or diversity with diversity being a more sensitive measure of effects. In the chronically exposed sectors, the exposure rate which resulted in a 50 per cent reduction in these 2 parameters (CC50 or D50) was still decreasing the second growing season and was approximately 18 R/hr for the CC50 as of June 1970 and 10 R/hr for the D50 as of September 1970. For the seasonally exposed sectors, the late fall period (December, 1969) was the most sensitive, summer (July, 1969) the least sensitive and spring (April, 1969) intermediate with CC50 and D50 values of 195 and 90, 240 and 222, and 120 and 74 R/hr for the spring, summer and late fall exposed sectors, respectively. Yield and density data indicated a rapid revegetation of the spring and summer exposed sectors during 1970 as a result of an influx of invader species such as Salsola kali tenuifolia, Chenopodium leptophyllum and Lepidium densiflorum and the

Vegetation of the coastal fynbos and rocky headlands south of George, South Africa

Directory of Open Access Journals (Sweden)

D. B. Hoare

2000-02-01

Full Text Available Community structure and composition of the coastal fynbos and rocky headland plant communities south of George, southern Cape, were studied. Vegetation was analysed using standard sampling procedures of the floristic-sociological approach of Braun-Blanquet. The releve data were subject to TWIN SPAN-based divisive classification, and ordinated by Principal Coordinates Analysis with the aim to identify vegetation coenocline subsequently interpreted in terms of under­lying environmental gradients. Most of the sampled vegetation was classified as coastal fynbos. The  Leucadendron salignum-Tetraria cuspidata Fynbos Community was found to occupy sheltered habitats, whereas the  Relhania calyci- na-Passerina vulgaris Fynbos Community was found in exposed habitats The other two communities characterise strong­ly exposed rocky headlands. The Pterocelastrus tricuspidatus-Ruschia tenella Community is wind-sheared scrub, and the Gazania rigens- Limonium scabrum Rocky Headland Community is a loose-canopy, low-grown herbland, characterised by the occurrence of partly salt-tolerant and succulent herbs. The ordination of the fynbos communities revealed a horseshoe structure allowing a direct recognition of a coenocline spanning two fynbos communities along the Axis 1 interpreted in terms of exposure to wind and salt spray. A considerable amount of alien plant infestation was also present. This appears to be the largest threat to the continued existence of this coastal fynbos.

Incorporating grassland management in a global vegetation model

Science.gov (United States)

Chang, Jinfeng; Viovy, Nicolas; Vuichard, Nicolas; Ciais, Philippe; Wang, Tao; Cozic, Anne; Lardy, Romain; Graux, Anne-Isabelle; Klumpp, Katja; Martin, Raphael; Soussana, Jean-François

2013-04-01

Grassland is a widespread vegetation type, covering nearly one-fifth of the world's land surface (24 million km2), and playing a significant role in the global carbon (C) cycle. Most of grasslands in Europe are cultivated to feed animals, either directly by grazing or indirectly by grass harvest (cutting). A better understanding of the C fluxes from grassland ecosystems in response to climate and management requires not only field experiments but also the aid of simulation models. ORCHIDEE process-based ecosystem model designed for large-scale applications treats grasslands as being unmanaged, where C / water fluxes are only subject to atmospheric CO2 and climate changes. Our study describes how management of grasslands is included in the ORCHIDEE, and how management affects modeled grassland-atmosphere CO2 fluxes. The new model, ORCHIDEE-GM (Grassland Management) is capable with a management module inspired from a grassland model (PaSim, version 5.0), of accounting for two grassland management practices (cutting and grazing). The evaluation of the results of ORCHIDEE-GM compared with those of ORCHIDEE at 11 European sites equipped with eddy covariance and biometric measurements, show that ORCHIDEE-GM can capture realistically the cut-induced seasonal variation in biometric variables (LAI: Leaf Area Index; AGB: Aboveground Biomass) and in CO2 fluxes (GPP: Gross Primary Productivity; TER: Total Ecosystem Respiration; and NEE: Net Ecosystem Exchange). But improvements at grazing sites are only marginal in ORCHIDEE-GM, which relates to the difficulty in accounting for continuous grazing disturbance and its induced complex animal-vegetation interactions. Both NEE and GPP on monthly to annual timescales can be better simulated in ORCHIDEE-GM than in ORCHIDEE without management. At some sites, the model-observation misfit in ORCHIDEE-GM is found to be more related to ill-constrained parameter values than to model structure. Additionally, ORCHIDEE-GM is able to simulate

Laser cutting of various materials: Kerf width size analysis and life cycle assessment of cutting process

Science.gov (United States)

Yilbas, Bekir Sami; Shaukat, Mian Mobeen; Ashraf, Farhan

2017-08-01

Laser cutting of various materials including Ti-6Al-4V alloy, steel 304, Inconel 625, and alumina is carried out to assess the kerf width size variation along the cut section. The life cycle assessment is carried out to determine the environmental impact of the laser cutting in terms of the material waste during the cutting process. The kerf width size is formulated and predicted using the lump parameter analysis and it is measured from the experiments. The influence of laser output power and laser cutting speed on the kerf width size variation is analyzed using the analytical tools including scanning electron and optical microscopes. In the experiments, high pressure nitrogen assisting gas is used to prevent oxidation reactions in the cutting section. It is found that the kerf width size predicted from the lump parameter analysis agrees well with the experimental data. The kerf width size variation increases with increasing laser output power. However, this behavior reverses with increasing laser cutting speed. The life cycle assessment reveals that material selection for laser cutting is critical for the environmental protection point of view. Inconel 625 contributes the most to the environmental damages; however, recycling of the waste of the laser cutting reduces this contribution.

ADVANCED CUTTINGS TRANSPORT STUDY

Energy Technology Data Exchange (ETDEWEB)

Stefan Miska; Troy Reed; Ergun Kuru

2004-09-30

The Advanced Cuttings Transport Study (ACTS) was a 5-year JIP project undertaken at the University of Tulsa (TU). The project was sponsored by the U.S. Department of Energy (DOE) and JIP member companies. The objectives of the project were: (1) to develop and construct a new research facility that would allow three-phase (gas, liquid and cuttings) flow experiments under ambient and EPET (elevated pressure and temperature) conditions, and at different angle of inclinations and drill pipe rotation speeds; (2) to conduct experiments and develop a data base for the industry and academia; and (3) to develop mechanistic models for optimization of drilling hydraulics and cuttings transport. This project consisted of research studies, flow loop construction and instrumentation development. Following a one-year period for basic flow loop construction, a proposal was submitted by TU to the DOE for a five-year project that was organized in such a manner as to provide a logical progression of research experiments as well as additions to the basic flow loop. The flow loop additions and improvements included: (1) elevated temperature capability; (2) two-phase (gas and liquid, foam etc.) capability; (3) cuttings injection and removal system; (4) drill pipe rotation system; and (5) drilling section elevation system. In parallel with the flow loop construction, hydraulics and cuttings transport studies were preformed using drilling foams and aerated muds. In addition, hydraulics and rheology of synthetic drilling fluids were investigated. The studies were performed under ambient and EPET conditions. The effects of temperature and pressure on the hydraulics and cuttings transport were investigated. Mechanistic models were developed to predict frictional pressure loss and cuttings transport in horizontal and near-horizontal configurations. Model predictions were compared with the measured data. Predominantly, model predictions show satisfactory agreements with the measured data. As a

Practical side of cutting. Part 3. ; CO2 laser cutting. Setsudan gijutsu no jissai. 3. ; Laser setsudan

Energy Technology Data Exchange (ETDEWEB)

Miyazaki, T.; Shinonaga, H. (Toshiba Corp., Tokyo (Japan))

1993-03-05

The nature peculiar to laser beam makes it difficult to understand the phenomena in laser cutting. Quoting an example of cutting steel materials, practical minimum basic subjects, factors governing the cutting phenomena with points to be considered, and the current state of the technology are outlined. Various kinds of expert systems and automatic programming devices have been placed on the market to make NC input easier in laser cutting. Shape accuracy, cutting quality, cutting speed, applicable plate thickness, etc. are among the subjects required for laser cutting. The factors are the method of scanning, characteristics of laser beam, work, machining conditions, etc. The factors obstructing stable processing are the change in the ambient temperature, humidity, dust, oil mist, vibration, etc. The basic factors which control the laser cutting are the power density and its distribution at the working point. Pulse cutting is employed when continuous laser heat input is not appropriate. Summarized report is made on the focal point and assist gas. 16 refs., 9 figs., 1 tab.

Cutting Cosmos

DEFF Research Database (Denmark)

Mikkelsen, Henrik Hvenegaard

For the first time in over 30 years, a new ethnographic study emerges on the Bugkalot tribe, more widely known as the Ilongot of the northern Philippines. Exploring the notion of masculinity among the Bugkalot, Cutting Cosmos is not only an experimental, anthropological study of the paradoxes...... around which Bugkalot society revolves, but also a reflection on anthropological theory and writing. Focusing on the transgressive acts through which masculinity is performed, this book explores the idea of the cosmic cut, the ritual act that enables the Bugkalot man to momentarily hold still the chaotic...

Latest development of laser cutting

OpenAIRE

Wetzig, Andreas; Herwig, Patrick; Hauptmann, Jan; Goppold, Cindy; Baumann, Robert; Fürst, Andreas; Rose, Michael; Pinder, Thomas; Mahrle, Achim; Beyer, Eckhard

2016-01-01

Laser cutting was one of the first applications of laser material processing. Today, laser cutting is the most widespread application among laser material processing besides laser marking. Meanwhile, nearly each material can be cut by means of a laser, in particular since ultra short pulse lasers are available in the power range of up to 100 W. The to be cut material can come with thicknesses from a few microns till tens of millimeters as flat stock or as free form shapes. The paper will conc...

Cull Vegetables As Substitute For Conventional Forages In Goats Diet

International Nuclear Information System (INIS)

AlSultan, S.I

2007-01-01

Comparison of certain responses of kids and nannies to a cull-vegetable diet as a substitute to the conventional diet (Barseem and Rhodes) was investigated. Kids after eight weeks of the experiment showed a significant increase in weight on all the three types of diet with more pronounced growth in the conventional diet containing Barseem and concentrate. On the other hand nannies exposed to the three types of diet following eight weeks of feeding displayed no significant increase in body weight as compared with the initial weight within each group or among the different groups. Similarly milk quality remained the same with no observable influence induced by the type of diet except that there was a slight increase in fat content of the cull -vegetable diet which require further investigation. (author)

Studies on Hormonal Effects on Rooting of Marcotting and Stem-Cuttings of Akee Apple (Blighia sapida K. D. Koenig

Directory of Open Access Journals (Sweden)

Ehoniyotan Olayemi IBUKUN

2016-12-01

Full Text Available The effect of hormone on the rooting of stem-cuttings and marcotting of akee apple was studied using a combination between Indole -3- Butyric Acid (IBA and 1- Naphthalene Acetic Acid (NAA. Stem-cuttings from mature akee trees from Challenge, Jalala and Ganmo in Ilorin, were treated with different dilutions of the liquid hormone in the combination of 1.0% Indole-3- butyric acid + 0.5% 1-Naphthaleneacetic acid before propagating them in a non-mist propagator. Marcotting was also carried-out on trees, using the hormonal combination of different dilutions. Observations and the results obtained revealed that the hormonal combination had significant effect on the rooting of stem-cuttings and marcotting. Both marcotting and stem cuttings did not produce at the end of the experiment roots in the absence of the hormonal treatment; a particular aspect was marcotting that initials produced roots. On the other hand, both marcotting and stem cuttings produced roots with the hormonal treatments; more roots were produced using the combination of 2,000 ppm of IBA and 1,000 ppm of NAA, compared with lower concentrations of the hormone mixtures. After callus formation, 2,000 ppm of IBA and 1,000 ppm of NAA combination gave the best results within stem-cuttings. Based on the results obtained, it was concluded that the combination of IBA and NAA in appropriate concentration promoted rooting in Akee apple and therefore are highly valuable for the vegetative propagation of this species through stem cutting and marcotting.

CALCULATION OF LASER CUTTING COSTS

Directory of Open Access Journals (Sweden)

Bogdan Nedic

2016-09-01

Full Text Available The paper presents description methods of metal cutting and calculation of treatment costs based on model that is developed on Faculty of mechanical engineering in Kragujevac. Based on systematization and analysis of large number of calculation models of cutting with unconventional methods, mathematical model is derived, which is used for creating a software for calculation costs of metal cutting. Software solution enables resolving the problem of calculating the cost of laser cutting, comparison' of costs made by other unconventional methods and provides documentation that consists of reports on estimated costs.

Determinants of self-reported smoking and misclassification during pregnancy, and analysis of optimal cut-off points for urinary cotinine: a cross-sectional study.

Science.gov (United States)

Aurrekoetxea, Juan J; Murcia, Mario; Rebagliato, Marisa; López, María José; Castilla, Ane Miren; Santa-Marina, Loreto; Guxens, Mónica; Fernández-Somoano, Ana; Espada, Mercedes; Lertxundi, Aitana; Tardón, Adonina; Ballester, Ferran

2013-01-24

To estimate the prevalence and factors associated with smoking and misclassification in pregnant women from INMA (INfancia y Medio Ambiente, Environment and Childhood) project, Spain, and to assess the optimal cut-offs for urinary cotinine (UC) that best distinguish daily and occasional smokers with varying levels of second-hand smoke (SHS) exposure. We used logistic regression models to study the relationship between sociodemographic variables and self-reported smoking and misclassification (self-reported non-smokers with UC >50 ng/ml). Receiver operating characteristic (ROC) curves were used to calculate the optimal cut-off point for discriminating smokers. The cut-offs were also calculated after stratification among non-smokers by the number of sources of SHS exposure. The cut-off points used to discriminate smoking status were the level of UC given by Youden's index and for 50 and 100 ng/ml for daily smokers, or 25 and 50 ng/ml for occasional smokers. At the third trimester of pregnancy, 2263 pregnant women of the INMA Project were interviewed between 2004 and 2008 and a urine sample was collected. Prevalence of self-reported smokers at the third trimester of pregnancy was 18.5%, and another 3.9% misreported their smoking status. Variables associated with self-reported smoking and misreporting were similar, including born in Europe, educational level and exposure to SHS. The optimal cut-off was 82 ng/ml (95% CI 42 to 133), sensitivity 95.2% and specificity 96.6%. The area under the ROC curve was 0.986 (95% CI 0.982 to 0.990). The cut-offs varied according to the SHS exposure level being 42 (95% CI 27 to 57), 82 (95% CI 46 to 136) and 106 ng/ml (95% CI 58 to 227) for not being SHS exposed, exposed to one, and to two or more sources of SHS, respectively. The optimal cut-off for discriminating occasional smokers from non-smokers was 27 ng/ml (95% CI 11 to 43). Prevalence of smoking during pregnancy in Spain remains high. UC is a reliable biomarker for classifying

Determinants of self-reported smoking and misclassification during pregnancy, and analysis of optimal cut-off points for urinary cotinine: a cross-sectional study

Science.gov (United States)

Aurrekoetxea, Juan J; Murcia, Mario; Rebagliato, Marisa; López, María José; Castilla, Ane Miren; Santa-Marina, Loreto; Guxens, Mónica; Fernández-Somoano, Ana; Espada, Mercedes; Lertxundi, Aitana; Tardón, Adonina; Ballester, Ferran

2013-01-01

Objectives To estimate the prevalence and factors associated with smoking and misclassification in pregnant women from INMA (INfancia y Medio Ambiente, Environment and Childhood) project, Spain, and to assess the optimal cut-offs for urinary cotinine (UC) that best distinguish daily and occasional smokers with varying levels of second-hand smoke (SHS) exposure. Design We used logistic regression models to study the relationship between sociodemographic variables and self-reported smoking and misclassification (self-reported non-smokers with UC >50 ng/ml). Receiver operating characteristic (ROC) curves were used to calculate the optimal cut-off point for discriminating smokers. The cut-offs were also calculated after stratification among non-smokers by the number of sources of SHS exposure. The cut-off points used to discriminate smoking status were the level of UC given by Youden's index and for 50 and 100 ng/ml for daily smokers, or 25 and 50 ng/ml for occasional smokers. Participants At the third trimester of pregnancy, 2263 pregnant women of the INMA Project were interviewed between 2004 and 2008 and a urine sample was collected. Results Prevalence of self-reported smokers at the third trimester of pregnancy was 18.5%, and another 3.9% misreported their smoking status. Variables associated with self-reported smoking and misreporting were similar, including born in Europe, educational level and exposure to SHS. The optimal cut-off was 82 ng/ml (95% CI 42 to 133), sensitivity 95.2% and specificity 96.6%. The area under the ROC curve was 0.986 (95% CI 0.982 to 0.990). The cut-offs varied according to the SHS exposure level being 42 (95% CI 27 to 57), 82 (95% CI 46 to 136) and 106 ng/ml (95% CI 58 to 227) for not being SHS exposed, exposed to one, and to two or more sources of SHS, respectively. The optimal cut-off for discriminating occasional smokers from non-smokers was 27 ng/ml (95% CI 11 to 43). Conclusions Prevalence of smoking during pregnancy in

Analysis and synthesis of a system for optimal automatic regulation of the process of mechanical cutting by a combine

Energy Technology Data Exchange (ETDEWEB)

Pop, E.; Coroescu, T.; Poanta, A.; Pop, M.

1978-01-01

Uncontrollable dynamic operating regime of a combine has a negative effect. A consequence of the uncontrolled change in productivity and rate during cutting is total decrease in productivity. The cutters of the cutting mechanism are prematurely worn out. The quality of the coal decreases. Complications with combine control reduce productivity. The motor is exposed to the maximum loads, its service life decreases, and there is an inefficient consumption of electricity. Studies of the optimal automatic regulation of the cutting process were made by the method of modeled analysis on digital and analog machines. The method uses an electronic-automatic device with integrating circuit of domestic production (A-741, A-723). This device controls and regulates the current parameters of the acting motor. The device includes primarily an element of information type of the Hall TH traductor type, the regulating element is an electronic relay, electronic power distributor, etc.

Tubing and cable cutting tool

Science.gov (United States)

Mcsmith, D. D.; Richardson, J. I. (Inventor)

1984-01-01

A hand held hydraulic cutting tool was developed which is particularly useful in deactivating ejection seats in military aircraft rescue operations. The tool consists primarily of a hydraulic system composed of a fluid reservoir, a pumping piston, and an actuator piston. Mechanical cutting jaws are attached to the actuator piston rod. The hydraulic system is controlled by a pump handle. As the pump handle is operated the actuator piston rod is forced outward and thus the cutting jaws are forced together. The frame of the device is a flexible metal tubing which permits easy positioning of the tool cutting jaws in remote and normally inaccessible locations. Bifurcated cutting edges ensure removal of a section of the tubing or cable to thereby reduce the possibility of accidental reactivation of the tubing or cable being severed.

Cutting concrete with abrasion jet

International Nuclear Information System (INIS)

Yie, G.G.

1982-01-01

Fluidyne Corporation has developed a unique process and apparatus that allow selected abrasives to be introduced into high-speed waterjet to produce abrasive-entrained waterjet that has high material-cutting capabilities, which is termed by Fluidyne as the Abrasion Jet. Such Abrasion Jet has demonstrated capability in cutting hard rock and concrete at a modest pressure of less than 1360 bars (20,000 psi) and a power input of less than 45 kW (60 horsepower). Abrasion Jet cutting of concrete is characterized by its high rate of cutting, flexible operation, good cut quality, and relatively low costs. This paper presents a general description of this technology together with discussions of recent test results and how it could be applied to nuclear decontamination and decommissioning work. 8 references

Influence of cutting parameters on the depth of subsurface deformed layer in nano-cutting process of single crystal copper.

Science.gov (United States)

Wang, Quanlong; Bai, Qingshun; Chen, Jiaxuan; Su, Hao; Wang, Zhiguo; Xie, Wenkun

2015-12-01

Large-scale molecular dynamics simulation is performed to study the nano-cutting process of single crystal copper realized by single-point diamond cutting tool in this paper. The centro-symmetry parameter is adopted to characterize the subsurface deformed layers and the distribution and evolution of the subsurface defect structures. Three-dimensional visualization and measurement technology are used to measure the depth of the subsurface deformed layers. The influence of cutting speed, cutting depth, cutting direction, and crystallographic orientation on the depth of subsurface deformed layers is systematically investigated. The results show that a lot of defect structures are formed in the subsurface of workpiece during nano-cutting process, for instance, stair-rod dislocations, stacking fault tetrahedron, atomic clusters, vacancy defects, point defects. In the process of nano-cutting, the depth of subsurface deformed layers increases with the cutting distance at the beginning, then decreases at stable cutting process, and basically remains unchanged when the cutting distance reaches up to 24 nm. The depth of subsurface deformed layers decreases with the increase in cutting speed between 50 and 300 m/s. The depth of subsurface deformed layer increases with cutting depth, proportionally, and basically remains unchanged when the cutting depth reaches over 6 nm.

Analysis of remote sensing data for evaluation of vegetation resources

Science.gov (United States)

1970-01-01

Research has centered around: (1) completion of a study on the use of remote sensing techniques as an aid to multiple use management; (2) determination of the information transfer at various image resolution levels for wildland areas; and (3) determination of the value of small scale multiband, multidate photography for the analysis of vegetation resources. In addition, a substantial effort was made to upgrade the automatic image classification and spectral signature acquisition capabilities of the laboratory. It was found that: (1) Remote sensing techniques should be useful in multiple use management to provide a first-cut analysis of an area. (2) Imagery with 400-500 feet ground resolvable distance (GRD), such as that expected from ERTS-1, should allow discriminations to be made between woody vegetation, grassland, and water bodies with approximately 80% accuracy. (3) Barley and wheat acreages in Maricopa County, Arizona could be estimated with acceptable accuracies using small scale multiband, multidate photography. Sampling errors for acreages of wheat, barley, small grains (wheat and barley combined), and all cropland were 13%, 11%, 8% and 3% respectively.

Categories of fruit and vegetables: Attributes and definitions in Serbian

Directory of Open Access Journals (Sweden)

Dilparić Branislava M.

2011-01-01

Full Text Available According to the results of an empirical investigation performed by E. Rosch and K. Mervis (1975, the prototype structures of the categories FRUIT and VEGETABLES, the two superordinate and neighbouring categories with no clear-cut boundaries between them, are formed by family resemblances. Each category has only two attributes ('(part of a plant' and 'edible' which are common to all its members and yet not sufficient to define the category and separate it from other categories of edible (parts of plants. Through the analysis and comparison of a number of definitions for FRUIT and VEGETABLES (obtained in a questionnaire-based survey from a hundred native speakers of Serbian; taken from Lexicography and Conceptual Analysis by A. Wierzbicka; taken from five general dictionaries of the Serbian language, the author of this paper attempts to determine the group of attributes that could play a key role in differentiating the observed categories and to search for the most appropriate way to define the two categories in Serbian which would hopefully be acceptable to both modern (prototype semantics and practical lexicography.

ADVANCED CUTTINGS TRANSPORT STUDY

Energy Technology Data Exchange (ETDEWEB)

Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Mengjiao Yu; Ramadan Ahmed; Mark Pickell; Len Volk; Lei Zhou; Zhu Chen; Aimee Washington; Crystal Redden

2003-09-30

The Quarter began with installing the new drill pipe, hooking up the new hydraulic power unit, completing the pipe rotation system (Task 4 has been completed), and making the SWACO choke operational. Detailed design and procurement work is proceeding on a system to elevate the drill-string section. The prototype Foam Generator Cell has been completed by Temco and delivered. Work is currently underway to calibrate the system. Literature review and preliminary model development for cuttings transportation with polymer foam under EPET conditions are in progress. Preparations for preliminary cuttings transport experiments with polymer foam have been completed. Two nuclear densitometers were re-calibrated. Drill pipe rotation system was tested up to 250 RPM. Water flow tests were conducted while rotating the drill pipe up to 100 RPM. The accuracy of weight measurements for cuttings in the annulus was evaluated. Additional modifications of the cuttings collection system are being considered in order to obtain the desired accurate measurement of cuttings weight in the annular test section. Cutting transport experiments with aerated fluids are being conducted at EPET, and analyses of the collected data are in progress. The printed circuit board is functioning with acceptable noise level to measure cuttings concentration at static condition using ultrasonic method. We were able to conduct several tests using a standard low pass filter to eliminate high frequency noise. We tested to verify that we can distinguish between different depths of sand in a static bed of sand. We tested with water, air and a mix of the two mediums. Major modifications to the DTF have almost been completed. A stop-flow cell is being designed for the DTF, the ACTF and Foam Generator/Viscometer which will allow us to capture bubble images without the need for ultra fast shutter speeds or microsecond flash system.

Development of a Checklist for Assessing Good Hygiene Practices of Fresh-Cut Fruits and Vegetables Using Focus Group Interviews.

Science.gov (United States)

Araújo, Jane A M; Esmerino, Erick A; Alvarenga, Verônica O; Cappato, Leandro P; Hora, Iracema C; Silva, Marcia Cristina; Freitas, Monica Q; Pimentel, Tatiana C; Walter, Eduardo H M; Sant'Ana, Anderson S; Cruz, Adriano G

2018-03-01

This study aimed to develop a checklist for good hygiene practices (GHP) for raw material of vegetable origin using the focus groups (FGs) approach (n = 4). The final checklist for commercialization of horticultural products totaled 28 questions divided into six blocks, namely: water supply; hygiene, health, and training; waste control; control of pests; packaging and traceability; and hygiene of facilities and equipment. The FG methodology was efficient to elaborate a participatory and objective checklist, based on minimum hygiene requirements, serving as a tool for diagnosis, planning, and training in GHP of fresh vegetables, besides contributing to raise awareness of the consumers' food safety. The FG methodology provided useful information to establish the final checklist for GHP, with easy application, according to the previous participants' perception and experience.

Using internally cooled cutting tools in the machining of difficult-to-cut materials based on Waspaloy

Directory of Open Access Journals (Sweden)

Yahya Isik

2016-05-01

Full Text Available Nickel-based superalloys such as Waspaloy are used for engine components and in the nuclear industry, where considerable strength and corrosion resistance at high operating temperatures are called for. These characteristics of such alloys cause increases in cutting temperature and resultant tool damage, even at low cutting speeds and low feed rates. Thus, they are classified as difficult-to-cut materials. This article presents a cooling method to be used in metal cutting based on a tool holder with a closed internal cooling system with cooling fluid circulating inside. Hence, a green cooling method that does not harm the environment and is efficient in removing heat from the cutting zone was developed. A series of cutting experiments were conducted to investigate the practicality and effectiveness of the internally cooled tool model. The developed system achieved up to 13% better surface quality than with dry machining, and tool life was extended by 12%. The results clearly showed that with the reduced cutting temperature of the internal cooling, it was possible to control the temperature and thus prevent reaching the critical cutting temperature during the turning process, which is vitally important in extending tool life during the processing of Waspaloy.

Examination of the immune responses of males and workers of the leaf-cutting ant Acromyrmex echinatior and the effect of infection

DEFF Research Database (Denmark)

Baer, Boris; Krug, A.; Boomsma, Jacobus Jan

2005-01-01

-cutting ant workers being more variable in age or more genetically diverse within colonies. When exposed to the entomopathogenic fungus Metarhizium, workers expressed a substantially reduced immune response 96 h after infection, suggesting that the immune system was either depleted by having to respond...

Quantitative Microbial Risk Assessment for Escherichia coli O157:H7 in Fresh-Cut Lettuce.

Science.gov (United States)

Pang, Hao; Lambertini, Elisabetta; Buchanan, Robert L; Schaffner, Donald W; Pradhan, Abani K

2017-02-01

Leafy green vegetables, including lettuce, are recognized as potential vehicles for foodborne pathogens such as Escherichia coli O157:H7. Fresh-cut lettuce is potentially at high risk of causing foodborne illnesses, as it is generally consumed without cooking. Quantitative microbial risk assessments (QMRAs) are gaining more attention as an effective tool to assess and control potential risks associated with foodborne pathogens. This study developed a QMRA model for E. coli O157:H7 in fresh-cut lettuce and evaluated the effects of different potential intervention strategies on the reduction of public health risks. The fresh-cut lettuce production and supply chain was modeled from field production, with both irrigation water and soil as initial contamination sources, to consumption at home. The baseline model (with no interventions) predicted a mean probability of 1 illness per 10 million servings and a mean of 2,160 illness cases per year in the United States. All intervention strategies evaluated (chlorine, ultrasound and organic acid, irradiation, bacteriophage, and consumer washing) significantly reduced the estimated mean number of illness cases when compared with the baseline model prediction (from 11.4- to 17.9-fold reduction). Sensitivity analyses indicated that retail and home storage temperature were the most important factors affecting the predicted number of illness cases. The developed QMRA model provided a framework for estimating risk associated with consumption of E. coli O157:H7-contaminated fresh-cut lettuce and can guide the evaluation and development of intervention strategies aimed at reducing such risk.

Early steps of adventitious rooting: morphology, hormonal profiling and carbohydrate turnover in carnation stem cuttings.

Science.gov (United States)

Agulló-Antón, María Ángeles; Ferrández-Ayela, Almudena; Fernández-García, Nieves; Nicolás, Carlos; Albacete, Alfonso; Pérez-Alfocea, Francisco; Sánchez-Bravo, José; Pérez-Pérez, José Manuel; Acosta, Manuel

2014-03-01

The rooting of stem cuttings is a common vegetative propagation practice in many ornamental species. A detailed analysis of the morphological changes occurring in the basal region of cultivated carnation cuttings during the early stages of adventitious rooting was carried out and the physiological modifications induced by exogenous auxin application were studied. To this end, the endogenous concentrations of five major classes of plant hormones [auxin, cytokinin (CK), abscisic acid, salicylic acid (SA) and jasmonic acid] and the ethylene precursor 1-aminocyclopropane-1-carboxylic acid were analyzed at the base of stem cuttings and at different stages of adventitious root formation. We found that the stimulus triggering the initiation of adventitious root formation occurred during the first hours after their excision from the donor plant, due to the breakdown of the vascular continuum that induces auxin accumulation near the wounding. Although this stimulus was independent of exogenously applied auxin, it was observed that the auxin treatment accelerated cell division in the cambium and increased the sucrolytic activities at the base of the stem, both of which contributed to the establishment of the new root primordia at the stem base. Further, several genes involved in auxin transport were upregulated in the stem base either with or without auxin application, while endogenous CK and SA concentrations were specially affected by exogenous auxin application. Taken together our results indicate significant crosstalk between auxin levels, stress hormone homeostasis and sugar availability in the base of the stem cuttings in carnation during the initial steps of adventitious rooting. © 2013 Scandinavian Plant Physiology Society.

Disturbance metrics predict a wetland Vegetation Index of Biotic Integrity

Science.gov (United States)

Stapanian, Martin A.; Mack, John; Adams, Jean V.; Gara, Brian; Micacchion, Mick

2013-01-01

Indices of biological integrity of wetlands based on vascular plants (VIBIs) have been developed in many areas in the USA. Knowledge of the best predictors of VIBIs would enable management agencies to make better decisions regarding mitigation site selection and performance monitoring criteria. We use a novel statistical technique to develop predictive models for an established index of wetland vegetation integrity (Ohio VIBI), using as independent variables 20 indices and metrics of habitat quality, wetland disturbance, and buffer area land use from 149 wetlands in Ohio, USA. For emergent and forest wetlands, predictive models explained 61% and 54% of the variability, respectively, in Ohio VIBI scores. In both cases the most important predictor of Ohio VIBI score was a metric that assessed habitat alteration and development in the wetland. Of secondary importance as a predictor was a metric that assessed microtopography, interspersion, and quality of vegetation communities in the wetland. Metrics and indices assessing disturbance and land use of the buffer area were generally poor predictors of Ohio VIBI scores. Our results suggest that vegetation integrity of emergent and forest wetlands could be most directly enhanced by minimizing substrate and habitat disturbance within the wetland. Such efforts could include reducing or eliminating any practices that disturb the soil profile, such as nutrient enrichment from adjacent farm land, mowing, grazing, or cutting or removing woody plants.

Laser Cutting, Development Trends

DEFF Research Database (Denmark)

Olsen, Flemming Ove

1999-01-01

In this paper a short review of the development trends in laser cutting will be given.The technology, which is the fastest expanding industrial production technology will develop in both its core market segment: Flat bed cutting of sheet metal, as it will expand in heavy industry and in cutting...... of 3-dimensional shapes.The CO2-laser will also in the near future be the dominating laser source in the market, although the new developments in ND-YAG-lasers opens for new possibilities for this laser type....

Water-Cut Sensor System

KAUST Repository

Karimi, Muhammad Akram; Shamim, Atif; Arsalan, Muhammad

2018-01-01

Provided in some embodiments is a method of manufacturing a pipe conformable water-cut sensors system. Provided in some embodiments is method for manufacturing a water-cut sensor system that includes providing a helical T-resonator, a helical ground

Effects of cutting and maturity on antioxidant activity of fresh-cut tomatoes

NARCIS (Netherlands)

Moreira Lana, M.; Tijskens, L.M.M.; Kooten, van O.

2005-01-01

To investigate the changes in total antioxidant activity of fresh-cut tomato during storage, tomato fruits harvested at three different stages of maturity were cut into 7-mm thick slices and stored at 5°C. Intact (control) fruits were stored in the same conditions. The antioxidant activity was

Quality Analysis of Cutting Steel Using Laser

Directory of Open Access Journals (Sweden)

Vladislav Markovič

2013-02-01

Full Text Available The article explores the quality dependence of the edge surface of steel C45 LST EN 10083-1 obtained cutting the material using laser on different cutting regimes and variations in the thickness of trial steel. The paper presents the influence of the main modes of laser cutting equipment Trulaser 3030, including cutting speed, pressure, angle and the thickness of the surface on the quality characteristics of the sample. The quality of the edge after laser cutting is the most important indicator influencing such technological spread in industry worldwide. Laser cutting is the most popular method of material cutting. Therefore, the article focuses on cutting equipment, cutting defects and methods of analysis. Research on microstructure, roughness and micro-toughness has been performed with reference to edge samples. At the end of the publication, conclusions are drawn.Article in Lithuanian

Quality Analysis of Cutting Steel Using Laser

Directory of Open Access Journals (Sweden)

Vladislav Markovič

2012-12-01

Full Text Available The article explores the quality dependence of the edge surface of steel C45 LST EN 10083-1 obtained cutting the material using laser on different cutting regimes and variations in the thickness of trial steel. The paper presents the influence of the main modes of laser cutting equipment Trulaser 3030, including cutting speed, pressure, angle and the thickness of the surface on the quality characteristics of the sample. The quality of the edge after laser cutting is the most important indicator influencing such technological spread in industry worldwide. Laser cutting is the most popular method of material cutting. Therefore, the article focuses on cutting equipment, cutting defects and methods of analysis. Research on microstructure, roughness and micro-toughness has been performed with reference to edge samples. At the end of the publication, conclusions are drawn.Article in Lithuanian

Options of the recovery of the populations health exposed to the radio stressor factors using 'Pacovirin-plus'

International Nuclear Information System (INIS)

Spinu, C.; Bahnarel, I.; Coretchi, L.; Birca, L.; Spinu, I.; Vutcariov, V.; Palanciuc, E.; Chintea, P.

2008-01-01

The scientific results of the optimization of treatment of the ionizing radiation exposed patients using product of vegetable origin 'Pacovirin-plus' are related in this paper. Administration of the 'Pacovirin-plus' at the patients exposed to the radio stressor factors demonstrate the improvement of the health indices, manifested through the significant diminution of the asthenia, depressive syndromes and digestive disturb, restoration of the CD4/CD8 rapport and the antioxidant activity with the normalization of ALAT, ASAT and diminution of the peroxide oxidation activity of the lipids. (authors)

Effect of cutting medium temperatures on rooting process and root primordium differentiation of hardwood cuttings of tetraploid robinia pseudoacacia cutting medium temperatures of tetraploid robinia pseudoacacia

International Nuclear Information System (INIS)

Ling, W.X.; Jine, Q.; Zhong, Z.

2014-01-01

In this study, to examine the effect of heat treatment on the rooting and root development of hardwood cuttings of the tetraploid Robinia pseudoacacia, cuttings of 1-year-old stems were taken from 3-year-old mother trees and treated with IBA solution (1000 mg/L) for 6 h, with water was as a control. Treated cuttings were rooted in heated or unheated nursery beds. Samples were collected on day ten after planting, and then for every five days. The bases of the cuttings were embedded in paraffin and sectioned before being examined under a microscope to determine whether there had been any morphological changes. We found no root primordia in the tissues of the hardwood cuttings of the tetraploid Robinia pseudoacacia before cutting. In the heated bed, adventitious roots originated from callus tissue and the junction between the pith rays and cortical parenchyma cells, and in the unheated bed, adventitious roots originated only from callus tissue. The rooting process involved callus formation, adventitious root formation and elongation; rooting occurred 5-7 days earlier in the heated cuttings than in the unheated ones, and rooting rates were significantly higher in the former 30 days and 50 days after cutting; the minimum effective accumulated temperatures for these three stages were 109.25 degree C, 211.68 degree C and 301.38 degree C, respectively. Our results revealed that heating the soil can promote adventitious root formation, speed up the rooting rate, and cut the propagation period of the tetraploid Robinia pseudoacacia. (author)

New Modelling Strategies For Metal Cutting

International Nuclear Information System (INIS)

Rosa, Pedro A. R.; Martins, Paulo A. F.; Atkins, Anthony G.

2007-01-01

This paper draws from the 'plasticity and friction only' view of metal cutting to the presentation of new modelling strategies based on the interaction between finite elements and modern ductile fracture mechanics. The overall presentation is supported by specially designed orthogonal metal cutting experiments that were performed on Lead test specimens under laboratory-controlled conditions. Comparisons between theoretical predictions and experimental results comprise a wide range of topics such as material flow, cutting forces and specific cutting pressure. The paper demonstrates that while material flow and chip formation can be successfully modelled by traditional 'plasticity and friction only' analyses, the contribution of the fracture work involved in the formation of new surfaces is essential for obtaining good estimates of cutting forces and of the specific cutting pressure

Cutting method and device underwater

International Nuclear Information System (INIS)

Takano, Genta; Kamei, Hiromasa; Beppu, Seiji

1998-01-01

A place of material to be cut is surrounded by an openable/closable box. The material to be cut is cut underwater, and materials generated in this case are removed from the cut portion by a pressurized water jet. The removed materials are sucked and recovered together with water in the box. Among the materials caused by the cutting underwater, solid materials not floating on water are caused to stay in the midway of a sucking and recovering channel. A large sucking force might be required for the entire region of the sucking and recovering channel when sucking and recovering large sized solid materials not floating on water, but even large sized materials can be recovered easily according to the present invention since they are recovered after being sucked and stayed in the midway of the sucking and recovering channel. (N.H.)

Cutting zone area and chip morphology in high-speed cutting of titanium alloy Ti-6Al-4V

International Nuclear Information System (INIS)

Ke, Qing Chan; Xu, Daochun; Xiong, Dan Ping

2017-01-01

The titanium alloy Ti-6Al-4V has superior properties but poor machinability, yet is widely used in aerospace and biomedical industries. Chip formation and cutting zone area are important factors that have received limited attention. Thus, we propose a high-speed orthogonal cutting model for serrated chip formation. The high speed orthogonal cutting of Ti-6Al-4V was studied with a cutting speed of 10-160 m/min and a feed of 0.07-0.11 mm/r. Using theoretical models and experimental results, parameters such as chip shape, serration level, slip angle, and shear slip distance were investigated. Cutting zone boundaries (tool-chip contact length, length of shear plane, and critical slip plane) and cutting zone area were obtained. The results showed that discontinuous, long-curling, and continuous chips were formed at low, medium, and high speeds, respectively. Serration level, shear slip distance, and slip angle rose with increasing cutting speed. The length of shear plane, tool-chip contact, and critical slip plane varied subtly with increased cutting speed, and rose noticeably with increased feed. Cutting zone area grew weakly with increased cutting speed, levelling off at high cutting speed; however, it rose noticeably with increased feed. This study furthers our understanding of the shear slip phenomenon and the mechanism of serrated chip formation

Cutting zone area and chip morphology in high-speed cutting of titanium alloy Ti-6Al-4V

Energy Technology Data Exchange (ETDEWEB)

Ke, Qing Chan; Xu, Daochun; Xiong, Dan Ping [School of Technology, Beijing Forestry University, Beijing (China)

2017-01-15

The titanium alloy Ti-6Al-4V has superior properties but poor machinability, yet is widely used in aerospace and biomedical industries. Chip formation and cutting zone area are important factors that have received limited attention. Thus, we propose a high-speed orthogonal cutting model for serrated chip formation. The high speed orthogonal cutting of Ti-6Al-4V was studied with a cutting speed of 10-160 m/min and a feed of 0.07-0.11 mm/r. Using theoretical models and experimental results, parameters such as chip shape, serration level, slip angle, and shear slip distance were investigated. Cutting zone boundaries (tool-chip contact length, length of shear plane, and critical slip plane) and cutting zone area were obtained. The results showed that discontinuous, long-curling, and continuous chips were formed at low, medium, and high speeds, respectively. Serration level, shear slip distance, and slip angle rose with increasing cutting speed. The length of shear plane, tool-chip contact, and critical slip plane varied subtly with increased cutting speed, and rose noticeably with increased feed. Cutting zone area grew weakly with increased cutting speed, levelling off at high cutting speed; however, it rose noticeably with increased feed. This study furthers our understanding of the shear slip phenomenon and the mechanism of serrated chip formation.

Effects of cutting and maturity on antioxidant activity of fresh-cut tomatoes

NARCIS (Netherlands)

Moreira Lana, M.; Tijskens, L.M.M.

2006-01-01

To investigate the changes in total antioxidant activity of fresh-cut tomato during storage, tomato fruits harvested at three different stages of maturity were cut into 7-mm thick slices and stored at 5 °C. Intact fruits were stored in the same conditions as a control. The antioxidant activity was

Respiration rate and ethylene production of fresh cut lettuce as affected by cutting grade

Directory of Open Access Journals (Sweden)

J. MARTÍNEZ

2008-12-01

Full Text Available For designing optimal polymeric films for modified atmosphere packaging of whole heads as well as for minimally fresh processed (fresh-cut Iceberg lettuce ‘Coolguard’, the effect of several cutting grades on respiration rate (RR and ethylene production at 5ºC was studied. According to common industrial practices cutting grades less than 0.5 cm, between 0.5 and 1 cm, and 2 cm length were selected. Results from four experiments were compared to those obtained for whole heads in which a homogenous range of 6 to 8 ml CO2 kg-1 h-1 in RR was found. Compared to whole heads, in fresh-cut lettuce the RR was 2-fold higher. The lowest cutting grade showed the highest respiration rate, and no significant differences in RR among lettuce pieces of intermediate and the highest grades were found. No ethylene production was detected in whole heads, while in minimally processed lettuce pieces only traces were found. For avoiding risks of anaerobic respiration and excessive CO2 levels within packages containing fresh-cut lettuce pieces lower than 0.5 cm length, films with relatively high O2 permeability like standard polypropylene or low-density polyethylene must be selected.;

Test tube systems with cutting/recombination operations

Energy Technology Data Exchange (ETDEWEB)

Freund, R. [Technische Universitaet Wien (Austria); Csuhaj-Varju, E. [Computer and Automation Institute, Budapest (Hungary); Wachtler, F. [Universitaet Wien (Austria)

1996-12-31

We introduce test tube systems based on operations that are closely related to the splicing operations, i.e. we consider the operations of cutting a string at a specific site into two pieces with marking them at the cut ends and of recombining two strings with specifically marked endings. Whereas in the splicing of two strings these strings are cut at specific sites and the cut pieces are recombined immediately in a crosswise way, in CR(cutting/recombination)-schemes cutting can happen independently from recombining the cut pieces. Test tube systems based on these operations of cutting and recombination turn out to have maximal generative power even if only very restricted types of input filters for the test tubes are used for the redistribution of the contents of the test tubes after a period of cuttings and recombinations in the test tubes. 10 refs.

Laser cutting system

Science.gov (United States)

Dougherty, Thomas J

2015-03-03

A workpiece cutting apparatus includes a laser source, a first suction system, and a first finger configured to guide a workpiece as it moves past the laser source. The first finger includes a first end provided adjacent a point where a laser from the laser source cuts the workpiece, and the first end of the first finger includes an aperture in fluid communication with the first suction system.

Trim cut machining and surface integrity analysis of Nimonic 80A alloy using wire cut EDM

Directory of Open Access Journals (Sweden)

Amitesh Goswami

2017-02-01

Full Text Available This present work deals with the features of trim cut wire EDM machining of Nimonic 80A in terms of machining parameters, to predict material removal rate (MRR, surface roughness (Ra, wire wear ratio (WWR and microstructure analysis. Trim cut is performed after rough cut to remove the rough layer deposited after machining due to melting and re-solidification of the eroded metal from workpiece as well as from wire electrode. Taguchi’s design of experiments methodology has been used for planning and designing the experiments. The relative significance of various factors has also been evaluated and analyzed using ANOVA. The results clearly indicate trim cut potential for high surface finish compared to rough cut machining.

Laser Cutting of Carbon Fiber Fabrics

Science.gov (United States)

Fuchs, A. N.; Schoeberl, M.; Tremmer, J.; Zaeh, M. F.

Due to their high weight-specific mechanical stiffness and strength, parts made from carbon fiber reinforced polymers (CFRP) are increasingly used as structural components in the aircraft and automotive industry. However, the cutting of preforms, as with most automated manufacturing processes for CFRP components, has not yet been fully optimized. This paper discusses laser cutting, an alternative method to the mechanical cutting of preforms. Experiments with remote laser cutting and gas assisted laser cutting were carried out in order to identify achievable machining speeds. The advantages of the two different processes as well as their fitness for use in mass production are discussed.

Automated Laser Cutting In Three Dimensions

Science.gov (United States)

Bird, Lisa T.; Yvanovich, Mark A.; Angell, Terry R.; Bishop, Patricia J.; Dai, Weimin; Dobbs, Robert D.; He, Mingli; Minardi, Antonio; Shelton, Bret A.

1995-01-01

Computer-controlled machine-tool system uses laser beam assisted by directed flow of air to cut refractory materials into complex three-dimensional shapes. Velocity, position, and angle of cut varied. In original application, materials in question were thermally insulating thick blankets and tiles used on space shuttle. System shapes tile to concave or convex contours and cuts beveled edges on blanket, without cutting through outer layer of quartz fabric part of blanket. For safety, system entirely enclosed to prevent escape of laser energy. No dust generated during cutting operation - all material vaporized; larger solid chips dislodged from workpiece easily removed later.

Identification and characterization of a novel Cut family cDNA that encodes human copper transporter protein CutC

International Nuclear Information System (INIS)

Li Jixi; Ji Chaoneng; Chen Jinzhong; Yang Zhenxing; Wang Yijing; Fei, Xiangwei; Zheng Mei; Gu Xing; Wen Ge; Xie Yi; Mao Yumin

2005-01-01

Copper is an essential heavy metal trace element that plays important roles in cell physiology. The Cut family was associated with the copper homeostasis and involved in several important metabolisms, such as uptake, storage, delivery, and efflux of copper. In this study, a novel Cut family cDNA was isolated from the human fetal brain library, which encodes a 273 amino acid protein with a molecular mass of about 29.3 kDa and a calculated pI of 8.17. It was named hCutC (human copper transporter protein CutC). The ORF of hCutC gene was cloned into pQE30 vector and expressed in Escherichia coli M15. The secreted hCutC protein was purified to a homogenicity of 95% by using the Ni-NTA affinity chromatography. RT-PCR analysis showed that the hCutC gene expressed extensively in human tissues. Subcellular location analysis of hCutC-EGFP fusion protein revealed that hCutC was distributed to cytoplasm of COS-7 cells, and both cytoplasm and nucleus of AD293 cells. The results suggest that hCutC may be one shuttle protein and play important roles in intracellular copper trafficking

The chronic toxicity of mineral oil-wet and synthetic liquid-wet cuttings on an estuarine fish, Fundulus grandis

International Nuclear Information System (INIS)

Jones, F.V.; Rushing, J.H.; Churan, M.A.

1991-01-01

One of the major factors concerning oil-wet cuttings discharges in the long-term effect on the aquatic environment. This paper investigates the survival and growth of the mud minnow, Fundulus grandis, when exposed to different concentrations of mineral oil-wet and synthetic liquid-wet cuttings in flow-through bioassay chambers. The test fluids were a low aromatic mineral oil-based mud (MOBM) and a synthetic liquid-based mud (SBM). Each test fluid was added to a container of dried water-based cuttings which contained minimum hydrocarbons. The fluid and cuttings were mixed to obtain the desired test concentrations. The study tested three concentrations (1%, 5%, and 8.4% by dry weight) of each fluid on the cuttings. Growth rates during the 3-day period were modest with fish in 1% MOBM losing weight. The highest percent growth rates were obtained with fish cultured in 5% SBM and the controls. However, overall growth was not significantly different between treatments. Mean growth did show a significant difference between controls and 5% SBM, and other treatments. The cuttings of the 5% and 8.4% concentrations of both treatments looked like paste. These pastes may have slowed the movement of organics off of the cuttings beds and affected biodegradability and growth rates. Cuttings in the controls and 1% concentrations stayed suspended in the water column longer when disturbed and looked more like loose gravel. Uptake of the MOBM occurred in the internal organs and tissue of fish. No such uptake was observed in the fish tissue with the SBM; a very low level of synthetic liquid was detected in one gut sample only. This may be the major reason for the variations noted in growth rates. Fish mortality during the study was related to the buildup of anaerobic conditions and insufficient aeration. Fish survival for the entire study was 94%

Using Food Grade Lye “omushelekha” in the Formulation of Health Products from Commonly Consumed African Indigenous Vegetables and Vegetable Combinations

Directory of Open Access Journals (Sweden)

Florence O Habwe

2011-05-01

, and Crotolaria occloreuca (110/100g, Amaranthus blitum (108mg/100g boiled-fried with lye. It was possible that iron was leached from the cooking utensils and absorbed by the vegetables.Conclusion: The results of this study clearly demonstrated that vegetable combinations of Amaranthus blitum-Crotolaria occloreuca had a higher content of copper. Vegetable combinations exposed to different treatments had higher levels of iron and copper. This could be attributed different nutrient-nutrient interactions between different vegetables combinations.

Poliuretana derivada de óleos vegetais exposta ao intemperismo artificial Polyurethane derived from vegetal oil exposed to artificial weathering

Directory of Open Access Journals (Sweden)

Alessandra E. F. S. Almeida

2006-01-01

Full Text Available Foram obtidas as propriedades mecânicas e viscoelásticas da poliuretana derivada do óleo de mamona após sua exposição ao intemperismo artificial, a fim de avaliar a aplicabilidade deste material como revestimento polimérico para substratos de concreto na Construção Civil. Os procedimentos experimentais foram realizados em conformidade com a ASTM G 53 for "Operating Light and Water Exposure Apparatus (Fluorescent UV - Condensation Type for Exposure of Nonmetallic Materials"[1]. O ensaio para a caracterização mecânica dos corpos-de-prova após exposição ao intemperismo artificial foi realizado conforme a norma ASTM D 638M-96 "Standard Test Method for Tensile Properties of Plastics (Metric"[2]. Foi empregado o método de análise dinâmico-mecânica para a obtenção das propriedades viscoelásticas da poliuretana vegetal. Os resultados mostraram que a exposição ao intemperismo artificial não ocasionou mudanças significativas nas propriedades do revestimento polimérico para o tempo de exposição estudado.The mechanical and viscoelastic properties of polyurethane derived from castor oil were obtained after being exposed to artificial weathering with the purpose of evaluating their applicability as polymeric coatings on concrete substrate for Civil Construction. The procedures followed the ASTM G53 for "Operating Light and Water Exposure Apparatus (Fluorescent UV - Condensation Type for Exposure of Nonmetallic Materials"[1]. Mechanical properties were obtained by means of the ASTM D 638M-96 "Standard Test Method for Tensile Properties of Plastics (Metric"[2]. Furthermore, a Dynamic Mechanical Analysis (DMA was carried out in order to study the viscoelastic properties of polyurethane. The results showed that the properties were altered slightly considering the time studied.

Antimicrobial edible films and coatings for fresh and minimally processed fruits and vegetables: a review.

Science.gov (United States)

Valencia-Chamorro, Silvia A; Palou, Lluís; Del Río, Miguel A; Pérez-Gago, María B

2011-01-01

The use of edible films and coatings is an environmentally friendly technology that offers substantial advantages for shelf-life increase of many food products including fruits and vegetables. The development of new natural edible films and coatings with the addition of antimicrobial compounds to preserve fresh and minimally processed fruits and vegetables is a technological challenge for the industry and a very active research field worldwide. Antimicrobial agents have been successfully added to edible composite films and coatings based on polysaccharides or proteins such as starch, cellulose derivatives, chitosan, alginate, fruit puree, whey protein isolated, soy protein, egg albumen, wheat gluten, or sodium caseinate. This paper reviews the development of edible films and coatings with antimicrobial activity, typically through the incorporation of antimicrobial food additives as ingredients, the effect of these edible films on the control of target microorganisms, the influence of antimicrobial agents on mechanical and barrier properties of stand-alone edible films, and the effect of the application of antimicrobial edible coatings on the quality of fresh and fresh-cut fruits and vegetables.

Laser Cutting of Different Materials

Directory of Open Access Journals (Sweden)

Kadir ÇAVDAR

2013-08-01

Full Text Available In this paper; in general potential developments and trends of a particular machining field by extensively evaluating present studies of laser beam machining have been discussed. As it is indicated below, technical literatures have been subsumed under five major headlines: Experimental studies, reviews, optimization researches of the cutting parameters, theoretical modelling studies of laser beam cutting and academic studies relating to laser cutting

Assessment of exposure to hand-arm vibration and its related health effects in workers employed in stone cutting workshops of Hamadan city

Directory of Open Access Journals (Sweden)

Roya Bayat

2016-06-01

Full Text Available Introduction: The workers employed in stone cutting workplace are exposed to hand-arm vibration and its complications. The aim of this study was to evaluate the exposure to hand-arm vibration and its health effects on workers in the stone cutting workshops. Methods: In this descriptive-analytic study, 40 workers of Hamadan city stone cutting who worked with stone cutting machines were examined. Measuring exposure to hand-arm vibration was performed by standard methods ISO 5349. Symptoms related hand-arm vibration syndrome using a questionnaire construction was studied. Data were analyzed using SPSS software. Results: Results showed that 8-hour equivalent acceleration of hand-arm vibration exposure in stonecuttingworkers was exceeds the permissible exposure levels of country (Pv<0.05. Most average hand and arm vibration acceleration was measured in the Z axis. The average vibration acceleration hand-arm and cutting transverse and longitudinal cutting significant difference was observed (Pv<0.05. Conclusion: In regard to exposure level of stone cutting workers compared with the national exposure limit, the training of health care, non-smoking, and use of anti-vibration gloves, work rotations canthe effective in reducing the risk of health effects. Furthermore, it seems essential to track the health effects associated with human vibration by use of screening tests in the work place seem.

Occurrence and risk assessment of phthalate esters (PAEs) in vegetables and soils of suburban plastic film greenhouses.

Science.gov (United States)

Wang, Jun; Chen, Gangcai; Christie, Peter; Zhang, Manyun; Luo, Yongming; Teng, Ying

2015-08-01

Phthalate esters (PAEs) are suspected of having adverse effects on human health and have been frequently detected in soils and vegetables. The present study investigated their occurrence and composition in plastic film greenhouse soil-vegetable systems and assessed their potential health risks to farmers exposed to these widespread pollutants. Six priority control phthalates, namely dimethyl phthalate (DMP), diethyl phthalate (DEP), di-n-butyl phthalate (DnBP), butyl benzyl phthalate (BBP), di-(2-ethylhexyl) phthalate (DEHP) and di-n-octyl phthalate (DnOP), were determined in 44 plastic film greenhouse vegetables and corresponding soils. Total PAEs ranged from 0.51 to 7.16mgkg(-1) in vegetables and 0.40 to 6.20mgkg(-1) in soils with average concentrations of 2.56 and 2.23mgkg(-1), respectively. DnBP, DEHP and DnOP contributed more than 90% of the total PAEs in both vegetables and soils but the proportions of DnBP and DnOP in vegetables were significantly (p3.00mgkg(-1) but were plastic film greenhouses. Health risks were mainly by exposure through vegetable consumption and soil ingestion. Copyright © 2015 Elsevier B.V. All rights reserved.

Comparative study of 0° X-cut and Y + 36°-cut lithium niobate high-voltage sensing

Science.gov (United States)

Patel, N.; Branch, D. W.; Schamiloglu, E.; Cular, S.

2015-08-01

A comparison study between Y + 36° and 0° X-cut lithium niobate (LiNbO3) was performed to evaluate the influence of crystal cut on the acoustic propagation to realize a piezoelectric high-voltage sensor. The acoustic time-of-flight for each crystal cut was measured when applying direct current (DC), alternating current (AC), and pulsed voltages. Results show that the voltage-induced shift in the acoustic wave propagation time scaled quadratically with voltage for DC and AC voltages applied to X-cut crystals. For the Y + 36° crystal, the voltage-induced shift scales linearly with DC voltages and quadratically with AC voltages. When applying 5 μs voltage pulses to both crystals, the voltage-induced shift scaled linearly with voltage. For the Y + 36° cut, the voltage-induced shift from applying DC voltages ranged from 10 to 54 ps and 35 to 778 ps for AC voltages at 640 V over the frequency range of 100 Hz-100 kHz. Using the same conditions as the Y + 36° cut, the 0° X-cut crystal sensed a shift of 10-273 ps for DC voltages and 189-813 ps for AC voltage application. For 5 μs voltage pulses, the 0° X-cut crystal sensed a voltage induced shift of 0.250-2 ns and the Y + 36°-cut crystal sensed a time shift of 0.115-1.6 ns. This suggests a frequency sensitive response to voltage where the influence of the crystal cut was not a significant contributor under DC, AC, or pulsed voltage conditions. The measured DC data were compared to a 1-D impedance matrix model where the predicted incremental length changed as a function of voltage. When the voltage source error was eliminated through physical modeling from the uncertainty budget, the combined uncertainty of the sensor (within a 95% confidence interval) decreased to 0.0033% using a Y + 36°-cut crystal and 0.0032% using an X-cut crystal for all the voltage conditions used in this experiment.

Optical Cutting Interruption Sensor for Fiber Lasers

Directory of Open Access Journals (Sweden)

Benedikt Adelmann

2015-09-01

Full Text Available We report on an optical sensor system attached to a 4 kW fiber laser cutting machine to detect cutting interruptions. The sensor records the thermal radiation from the process zone with a modified ring mirror and optical filter arrangement, which is placed between the cutting head and the collimator. The process radiation is sensed by a Si and InGaAs diode combination with the detected signals being digitalized with 20 kHz. To demonstrate the function of the sensor, signals arising during fusion cutting of 1 mm stainless steel and mild steel with and without cutting interruptions are evaluated and typical signatures derived. In the recorded signals the piercing process, the laser switch on and switch off point and waiting period are clearly resolved. To identify the cutting interruption, the signals of both Si and InGaAs diodes are high pass filtered and the signal fluctuation ranges being subsequently calculated. Introducing a correction factor, we identify that only in case of a cutting interruption the fluctuation range of the Si diode exceeds the InGaAs diode. This characteristic signature was successfully used to detect 80 cutting interruptions of 83 incomplete cuts (alpha error 3.6% and system recorded no cutting interruption from 110 faultless cuts (beta error of 0. This particularly high detection rate in combination with the easy integration of the sensor, highlight its potential for cutting interruption detection in industrial applications.

Psychosomatic health status of children exposed to the Chernobyl accident

International Nuclear Information System (INIS)

Korol, N.; Shibata, Yoshisada; Nakane, Yoshibumi

1998-01-01

Childhood victims were investigated focussing on the psychosomatic disorders. The subjects were some of the 3834 children who evacuated from the Chernobyl zone to Kiev (evacuees) and 200 children who have been living in Kiev since prior to the accident (comparison group). A psychological test administered to 504 evacuees aged 12-14 years at the time of the accident and the comparison group indicated that the frequencies of neutroticism, high level of anxiety and conflicts were significantly higher in the evacuees than in the comparison group (p<0.001). Another psychological test administered at puberty to the 504 evacuees and 200 other evacuees exposed to the accident at 4-6 years of age indicated that the psycho-emotional portrait of evacuated teenagers significantly changed with time since the accident. The effects of the Chernobyl accident on the health of the vegetative dystonia observed in 1987-1990 and 1990-1995 were higher in the evacuees than in the comparison group, although they were not statistically significant. Furthermore, a significant (p<0.001) association of the vegetative dystonia with peptic and cardiovascular disorders was observed. The present study indicates that the vegetative dystonia is still highly prevalent among childhood victims and deems to support that the vegetative dystonia may be a precursor of several diseases such as cardiovascular and peptic disorders. It should be emphasized that a health promotion program to produce a change in psychological and social problems after the Chernobyl accident is necessary to decrease the health impact among Ukrainian people. (author)

Psychosomatic health status of children exposed to the Chernobyl accident

Energy Technology Data Exchange (ETDEWEB)

Korol, N. [Scientific Center for Radiation Medicine, Kiev (Ukraine); Shibata, Yoshisada; Nakane, Yoshibumi

1998-12-01

Childhood victims were investigated focussing on the psychosomatic disorders. The subjects were some of the 3834 children who evacuated from the Chernobyl zone to Kiev (evacuees) and 200 children who have been living in Kiev since prior to the accident (comparison group). A psychological test administered to 504 evacuees aged 12-14 years at the time of the accident and the comparison group indicated that the frequencies of neutroticism, high level of anxiety and conflicts were significantly higher in the evacuees than in the comparison group (p<0.001). Another psychological test administered at puberty to the 504 evacuees and 200 other evacuees exposed to the accident at 4-6 years of age indicated that the psycho-emotional portrait of evacuated teenagers significantly changed with time since the accident. The effects of the Chernobyl accident on the health of the vegetative dystonia observed in 1987-1990 and 1990-1995 were higher in the evacuees than in the comparison group, although they were not statistically significant. Furthermore, a significant (p<0.001) association of the vegetative dystonia with peptic and cardiovascular disorders was observed. The present study indicates that the vegetative dystonia is still highly prevalent among childhood victims and deems to support that the vegetative dystonia may be a precursor of several diseases such as cardiovascular and peptic disorders. It should be emphasized that a health promotion program to produce a change in psychological and social problems after the Chernobyl accident is necessary to decrease the health impact among Ukrainian people. (author)

VEGETATION MAPPING IN WETLANDS

Directory of Open Access Journals (Sweden)

F. PEDROTTI

2004-01-01

Full Text Available The current work examines the main aspects of wetland vegetation mapping, which can be summarized as analysis of the ecological-vegetational (ecotone gradients; vegetation complexes; relationships between vegetation distribution and geomorphology; vegetation of the hydrographic basin lo which the wetland in question belongs; vegetation monitoring with help of four vegetation maps: phytosociological map of the real and potential vegetation, map of vegetation dynamical tendencies, map of vegetation series.

Radioactive wear measurements of cutting tools made of metal in cutting aluminium alloys

International Nuclear Information System (INIS)

Frevert, E.

1977-01-01

The possibility of making quick checkings of the inhomogeneities of turning materials with radioactive wear measurements has been tested. After activation analysis of the long-lived radioisotopes of cutting tools made of hard metal a method for loss-free collection of the turnings has been developed. The detection limit of the abrasion is about 10 -8 g, the measuring times are 5-10 minutes. Special radiation protection measures are not necessary. An analysis of the abrasion showed that at the beginning of cutting the amount of cobalt is 6 times higher than in the normal composition of the used cutting tools. (author)

Optimum Vegetation Conditions for Successful Establishment of Planted Eastern White Pine (Pinus strobus L.

Directory of Open Access Journals (Sweden)

Douglas G. Pitt

2016-08-01

Full Text Available The 10th-growing season performance of planted eastern white pine (Pinus strobus L. seedlings was evaluated in response to herbaceous and woody vegetation control treatments within a clearcut and two variants of the uniform shelterwood regeneration system (single vs. multiple future removal cuts. Herbaceous vegetation control involved the suppression of grasses, forbs, ferns and low shrubs for the first 2 or 4 growing seasons after planting. Deciduous woody vegetation control treatments, conducted in combination with the herbaceous treatments within a response-surface design, involved the permanent removal of all tall shrubs and deciduous trees at the time of planting, at the end of the 2nd or 5th growing seasons, or not at all. In general, the average size of planted pine was related positively to the duration of herbaceous vegetation control and negatively to delays in woody control. White pine weevil (Pissodes strobi Peck altered these trends, reducing the height of pine on plots with little or no overtopping deciduous woody vegetation or mature tree cover. Where natural pine regeneration occurred on these plots, growth was similar but subordinate to the planted pine. Data from the three sites indicate that at least 60% of planted pine may be expected to reach an age-10 height target of 2.5 m when overtopping cover (residual overstory + regenerating deciduous is managed at approximately 65% ± 10%, and total herbaceous cover is suppressed to levels not exceeding 50% in the first five years. On productive sites, this combination may be difficult to achieve in a clearcut, and requires fairly rigorous vegetation management in shelterwood regeneration systems. Currently, synthetic herbicides offer the only affordable and effective means of achieving such vegetation control.

Canopy Modeling of Aquatic Vegetation: Construction of Submerged Vegetation Index

Science.gov (United States)

Ma, Z.; Zhou, G.

2018-04-01

The unique spectral characteristics of submerged vegetation in wetlands determine that the conventional terrestrial vegetation index cannot be directly employed to species identification and parameter inversion of submerged vegetation. Based on the Aquatic Vegetation Radiative Transfer model (AVRT), this paper attempts to construct an index suitable for submerged vegetation, the model simulated data and a scene of Sentinel-2A image in Taihu Lake, China are utilized for assessing the performance of the newly constructed indices and the existent vegetation indices. The results show that the angle index composed by 525 nm, 555 nm and 670 nm can resist the effects of water columns and is more sensitive to vegetation parameters such as LAI. Furthermore, it makes a well discrimination between submerged vegetation and water bodies in the satellite data. We hope that the new index will provide a theoretical basis for future research.

Economic technology of laser cutting

Science.gov (United States)

Fedin, Alexander V.; Shilov, Igor V.; Vassiliev, Vladimir V.; Malov, Dmitri V.; Peskov, Vladimir N.

2000-02-01

The laser cutting of color metals and alloys by a thickness more than 2 mm has significant difficulties due to high reflective ability and large thermal conduction. We made it possible to raise energy efficiency and quality of laser cutting by using a laser processing system (LPS) consisting both of the YAG:Nd laser with passive Q-switching on base of LiF:F2- crystals and the CO2 laser. A distinctive feature of the LPS is that the radiation of different lasers incorporated in a coaxial beam has simultaneously high level of peak power (more than 400 kW in a TEM00 mode) and significant level of average power (up to 800 W in a TEM01 mode of the CO2 laser). The application of combined radiation for cutting of an aluminum alloy of D16 type made it possible to decrease the cutting energy threshold in 1.7 times, to increase depth of treatment from 2 up to 4 mm, and velocity from 0.015 up to 0.7 m/min, and also to eliminate application of absorptive coatings. At cutting of steels the velocity of treatment was doubled, and also an oxygen flow was eliminated from the technological process and replaced by the air. The obtained raise of energy efficiency and quality of cutting is explained by an essential size reducing of a formed penetration channel and by the shifting of a thermal cutting mode from melting to evaporation. The evaluation of interaction efficiency of a combined radiation was produced on the basis of non-stationary thermal-hydrodynamic model of a heating source moving as in the cutting direction, and also into the depth of material.

Development of cutting device for irradiated fuel rod

International Nuclear Information System (INIS)

Lee, E. P.; Jun, Y. B.; Hong, K. P.; Min, D. K.; Lee, H. K.; Su, H. S.; Kim, K. S.; Kwon, H. M.; Joo, Y. S.; Yoo, K. S.; Joo, J. S.; Kim, E. K.

2004-01-01

Post Irradiation Examination(PIE) on irradiated fuel rods is essential for the evaluation of integrity and irradiation performance of fuel rods of commercial reactor fuel. For PIE, fuel rods should be cut very precisely. The cutting positions selected from NDT data are very important for further destructive examination and analysis. A fuel rod cutting device was developed witch can cut fuel rods longitudinal very precisely and can also cut the fuels into the same length rod cuts repeatedly. It is also easy to remove the fuel cutting powder after cutting works and it can extend the life time of cutting device and lower the contamination level of hot cell

Organic horizon and mineral soil mercury along three clear-cut forest chronosequences across the northeastern USA.

Science.gov (United States)

Richardson, Justin B; Petrenko, Chelsea L; Friedland, Andrew J

2017-12-01

Mercury (Hg) is a globally distributed pollutant trace metal that has been increasing in terrestrial environments due to rising anthropogenic emissions. Vegetation plays an important role in Hg sequestration in forested environments, but increasing tree removal for biofuels and wood products may affect this process. The long-term effect of clear-cutting on forest soil Hg remains uncertain, since most studies are limited to measuring changes for event. The chronosequence approach, which substitutes space for time using forest stands of different ages since clear-cutting, allows for investigation of processes occurring over decades to centuries. Here, we utilized three clear-cut forest soil chronosequences across the northeastern USA to understand Hg accumulation and retention over several decades. Total Hg concentrations and pools were quantified for five soil depth increments along three chronosequences. Our results showed Hg concentrations and pools decreased in the initial 20 years following clear-cutting. Mineral soil Hg pools decreased 21-53% (7-14 mg m -2 ) between 1-5-year-old stands and 15-25-year-old stands but mineral soil Hg pools recovered in 55-140-year-old stands to similar values as measured in 1-5-year-old stands. Our study is one of the first to demonstrate a decrease and recovery in Hg pool size. These changes in Hg did not correspond with changes in bulk density, soil C, or pH. We utilized a simple two-box model to determine how different Hg fluxes affected organic and mineral soil horizon Hg pools. Our simple model suggests that changes in litterfall and volatilization rates could have caused the observed changes in organic horizon Hg pools. However, only increases in leaching could reproduce observed decreases to mineral soil Hg pools. Further studies are needed to determine the mechanism of Hg loss from forest soils following clear-cutting.

ADVANCED CUTTINGS TRANSPORT STUDY

Energy Technology Data Exchange (ETDEWEB)

Troy Reed; Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Gerald Kane; Mark Pickell; Len Volk; Mike Volk; Barkim Demirdal; Affonso Lourenco; Evren Ozbayoglu; Paco Vieira; Lei Zhou

2000-01-30

This is the second quarterly progress report for Year 2 of the ACTS project. It includes a review of progress made in Flow Loop development and research during the period of time between Oct 1, 2000 and December 31, 2000. This report presents a review of progress on the following specific tasks: (a) Design and development of an Advanced Cuttings Transport Facility (Task 2: Addition of a foam generation and breaker system), (b) Research project (Task 6): ''Study of Cuttings Transport with Foam Under LPAT Conditions (Joint Project with TUDRP)'', (c) Research project (Task 7): ''Study of Cuttings Transport with Aerated Muds Under LPAT Conditions (Joint Project with TUDRP)'', (d) Research project (Task 8): ''Study of Flow of Synthetic Drilling Fluids Under Elevated Pressure and Temperature Conditions'', (e) Research project (Task 9): ''Study of Foam Flow Behavior Under EPET Conditions'', (f) Research project (Task 10): ''Study of Cuttings Transport with Aerated Mud Under Elevated Pressure and Temperature Conditions'', (g) Research on instrumentation tasks to measure: Cuttings concentration and distribution in a flowing slurry (Task 11), and Foam properties while transporting cuttings. (Task 12), (h) Development of a Safety program for the ACTS Flow Loop. Progress on a comprehensive safety review of all flow-loop components and operational procedures. (Task 1S). (i) Activities towards technology transfer and developing contacts with Petroleum and service company members, and increasing the number of JIP members. The tasks Completed During This Quarter are Task 7 and Task 8.

Proteomic profiling in incubation medium of mouse, rat and human precision-cut liver slices for biomarker detection regarding acute drug-induced liver injury

NARCIS (Netherlands)

van Swelm, Rachel P L; Hadi, Mackenzie; Laarakkers, Coby M M; Masereeuw, R.|info:eu-repo/dai/nl/155644033; Groothuis, Geny M M; Russel, Frans G M

Drug-induced liver injury is one of the leading causes of drug withdrawal from the market. In this study, we investigated the applicability of protein profiling of the incubation medium of human, mouse and rat precision-cut liver slices (PCLS) exposed to liver injury-inducing drugs for biomarker

[Syntaxonomic analysis of restorative successions after cutting down light coniferous forests of South Ural Region].

Science.gov (United States)

Martynenko, V B; Shirokhikh, P S; Mirkin, B M; Naumova, L G

2014-01-01

Discussed are the possibilities of using syntaxa from floristic classification for the analysis of secondary restorative successions after forest cutting in South Ural Region. Peculiarities of secondary forest communities classification that may be viewed as subjects of indigenous vegetation syntaxa forming, sub-associations or could be systematized according to 'deductive' classification introduced by K. Kopecky and S. Heiny are considered. An example is presented of an analysis of communities succession system formed after cutting down hemiboreal pine and birch-pine herbaceous forests of Bupleuro-Pinetum association. Within this system the processes of divergence and convergence of succession series take place. Divergence occur as a result of lifting of the influence caused by dominants edificating role and manifestation of differences in soil humidification, also as a consequence of soil enrichment by mineral elements after burning down the felling debris. The reason behind convergence is grading influence of renewed forest stand. Trends in species richness changes during restorative successions may differ depending on ecotope features. In course of a succession, models of tolerance and inhibition become apparent.

Submerged cutting characteristics of abrasive suspension jet

International Nuclear Information System (INIS)

Shimizu, Seiji; Peng, Guoyi; Oguma, Yasuyuki; Nishikata, Hiroyuki

2015-01-01

An abrasive suspension jet (ASJ) formed by propelling abrasive suspension through a nozzle has a greater cutting capability than the conventional abrasive water jet. However the cutting capability of submerged ASJs decreases drastically with increasing the standoff distance and the pressure around the jet. A sheathed nozzle with ventilation for ASJs has been developed as a mean of extending the effective stand-off distance and improving the cutting capabilities under submerged condition. In the present investigation, cutting tests by ASJs in air and under submerged condition are conducted with specimens of aluminum alloy. Air coated ASJs are formed by using a sheathed nozzle with ventilation. The relative cutting depth is defined as the cutting depth under submerged condition divided by the cutting depth in air at the same standoff distance. The relative cutting depth is arranged effectually by the cavitation number based on the cavity pressure measured at the sheath. (author)

Effects of Cutting Edge Microgeometry on Residual Stress in Orthogonal Cutting of Inconel 718 by FEM.

Science.gov (United States)

Shen, Qi; Liu, Zhanqiang; Hua, Yang; Zhao, Jinfu; Lv, Woyun; Mohsan, Aziz Ul Hassan

2018-06-14

Service performance of components such as fatigue life are dramatically influenced by the machined surface and subsurface residual stresses. This paper aims at achieving a better understanding of the influence of cutting edge microgeometry on machined surface residual stresses during orthogonal dry cutting of Inconel 718. Numerical and experimental investigations have been conducted in this research. The cutting edge microgeometry factors of average cutting edge radius S¯, form-factor K , and chamfer were investigated. An increasing trend for the magnitudes of both tensile and compressive residual stresses was observed by using larger S¯ or introducing a chamfer on the cutting edges. The ploughing depth has been predicted based on the stagnation zone. The increase of ploughing depth means that more material was ironed on the workpiece subsurface, which resulted in an increase in the compressive residual stress. The thermal loads were leading factors that affected the surface tensile residual stress. For the unsymmetrical honed cutting edge with K = 2, the friction between tool and workpiece and tensile residual stress tended to be high, while for the unsymmetrical honed cutting edge with K = 0.5, the high ploughing depth led to a higher compressive residual stress. This paper provides guidance for regulating machine-induced residual stress by edge preparation.

Quantum Max-flow/Min-cut

Science.gov (United States)

Cui, Shawn X.; Freedman, Michael H.; Sattath, Or; Stong, Richard; Minton, Greg

2016-06-01

The classical max-flow min-cut theorem describes transport through certain idealized classical networks. We consider the quantum analog for tensor networks. By associating an integral capacity to each edge and a tensor to each vertex in a flow network, we can also interpret it as a tensor network and, more specifically, as a linear map from the input space to the output space. The quantum max-flow is defined to be the maximal rank of this linear map over all choices of tensors. The quantum min-cut is defined to be the minimum product of the capacities of edges over all cuts of the tensor network. We show that unlike the classical case, the quantum max-flow=min-cut conjecture is not true in general. Under certain conditions, e.g., when the capacity on each edge is some power of a fixed integer, the quantum max-flow is proved to equal the quantum min-cut. However, concrete examples are also provided where the equality does not hold. We also found connections of quantum max-flow/min-cut with entropy of entanglement and the quantum satisfiability problem. We speculate that the phenomena revealed may be of interest both in spin systems in condensed matter and in quantum gravity.

Quantum Max-flow/Min-cut

Energy Technology Data Exchange (ETDEWEB)

Cui, Shawn X., E-mail: xingshan@math.ucsb.edu [Department of Mathematics, University of California, Santa Barbara, California 93106 (United States); Quantum Architectures and Computation Group, Microsoft Research, Redmond, Washington 98052 (United States); Freedman, Michael H., E-mail: michaelf@microsoft.com [Department of Mathematics, University of California, Santa Barbara, California 93106 (United States); Microsoft Research, Station Q, University of California, Santa Barbara, California 93106 (United States); Sattath, Or, E-mail: sattath@gmail.com [Computer Science Division, University of California, Berkeley, California 94720 (United States); Stong, Richard, E-mail: stong@ccrwest.org; Minton, Greg, E-mail: gtminto@ccrwest.org [Center for Communications Research, La Jolla, California 92121 (United States)

2016-06-15

The classical max-flow min-cut theorem describes transport through certain idealized classical networks. We consider the quantum analog for tensor networks. By associating an integral capacity to each edge and a tensor to each vertex in a flow network, we can also interpret it as a tensor network and, more specifically, as a linear map from the input space to the output space. The quantum max-flow is defined to be the maximal rank of this linear map over all choices of tensors. The quantum min-cut is defined to be the minimum product of the capacities of edges over all cuts of the tensor network. We show that unlike the classical case, the quantum max-flow=min-cut conjecture is not true in general. Under certain conditions, e.g., when the capacity on each edge is some power of a fixed integer, the quantum max-flow is proved to equal the quantum min-cut. However, concrete examples are also provided where the equality does not hold. We also found connections of quantum max-flow/min-cut with entropy of entanglement and the quantum satisfiability problem. We speculate that the phenomena revealed may be of interest both in spin systems in condensed matter and in quantum gravity.

Exploring the contributions of vegetation and dune size to early dune development using unmanned aerial vehicle (UAV) imaging

Science.gov (United States)

van Puijenbroek, Marinka E. B.; Nolet, Corjan; de Groot, Alma V.; Suomalainen, Juha M.; Riksen, Michel J. P. M.; Berendse, Frank; Limpens, Juul

2017-12-01

Dune development along highly dynamic land-sea boundaries is the result of interaction between vegetation and dune size with sedimentation and erosion processes. Disentangling the contribution of vegetation characteristics from that of dune size would improve predictions of nebkha dune development under a changing climate, but has proven difficult due to the scarcity of spatially continuous monitoring data. This study explored the contributions of vegetation and dune size to dune development for locations differing in shelter from the sea. We monitored a natural nebkha dune field of 8 ha, along the coast of the island Texel, the Netherlands, for 1 year using an unmanned aerial vehicle (UAV) with camera. After constructing a digital surface model and orthomosaic we derived for each dune (1) vegetation characteristics (species composition, vegetation density, and maximum vegetation height), (2) dune size (dune volume, area, and maximum height), (3) degree of shelter (proximity to other nebkha dunes and the sheltering by the foredune). Changes in dune volume over summer and winter were related to vegetation, dune size and degree of shelter. We found that a positive change in dune volume (dune growth) was linearly related to initial dune volume over summer but not over winter. Big dunes accumulated more sand than small dunes due to their larger surface area. Exposed dunes increased more in volume (0.81 % per dune per week) than sheltered dunes (0.2 % per dune per week) over summer, while the opposite occurred over winter. Vegetation characteristics did not significantly affect dune growth in summer, but did significantly affect dune growth in winter. Over winter, dunes dominated by Ammophila arenaria, a grass species with high vegetation density throughout the year, increased more in volume than dunes dominated by Elytrigia juncea, a grass species with lower vegetation density (0.43 vs. 0.42 (m3 m-3) week-1). The effect of species was irrespective of dune size or

Decontamination of a rotating cutting tool during operation by means of atmospheric pressure plasmas

DEFF Research Database (Denmark)

Leipold, Frank; Kusano, Yukihiro; Hansen, F.

2010-01-01

, is used for the experiments. A rotating knife was inoculated with L. innocua. The surface of the rotating knife was partly exposed to an atmospheric pressure dielectric barrier discharge operated in air, where the knife itself served as a ground electrode. The rotation of the knife ensures a treatment...... of the whole cutting tool. A log 5 reduction of L. innocua is obtained after 340 s of plasma operation. The temperature of the knife after treatment was found to be below 30 °C. The design of the setup allows a decontamination during slicing operation....

Potential use of ionizing radiation as quarantine treatment for fresh fruits, vegetables and flowers in Ecuador

International Nuclear Information System (INIS)

Munoz, Ricardo

1990-01-01

It is presented a brief description of the investigations Technology. Considering the potentiality of the country, to export non traditional and exotic fresh fruits, fresh vegetables, and ornamental fresh cut flowers, studies ares initiated to use ionizing radiation as quarantine treatments. This paper reports the initial data obtained with two species of fruit fly of high incidence in the fruit producer zones of Ecuador, whose stable and permanent microclimates allow to produce a sort of fruits along all year

Cutting Class Harms Grades

Science.gov (United States)

Taylor, Lewis A., III

2012-01-01

An accessible business school population of undergraduate students was investigated in three independent, but related studies to determine effects on grades due to cutting class and failing to take advantage of optional reviews and study quizzes. It was hypothesized that cutting classes harms exam scores, attending preexam reviews helps exam…

Sodium-cutting: a new top-down approach to cut open nanostructures on nonplanar surfaces on a large scale.

Science.gov (United States)

Chen, Wei; Deng, Da

2014-11-11

We report a new, low-cost and simple top-down approach, "sodium-cutting", to cut and open nanostructures deposited on a nonplanar surface on a large scale. The feasibility of sodium-cutting was demonstrated with the successfully cutting open of ∼100% carbon nanospheres into nanobowls on a large scale from Sn@C nanospheres for the first time.

Multi-Criteria Analysis of Laser Cut Surface Characteristics in CO2 Laser Cutting of Stainless Steel

Directory of Open Access Journals (Sweden)

M. Radovanović

2015-06-01

Full Text Available In this paper an approach for multi-criteria analysis of laser cut surface characteristics using multi-criteria decision making (MCDM approach was presented. Laser cutting experiment was conducted based on Taguchi’s L27 experimental design by varying laser power, cutting speed, assist gas pressure and focus position at three levels. Multi-criteria analysis was performed by using the weighted aggregated sum product assessment (WASPAS method while considering burr height, drag line separation, depth of separation line, surface roughness and perpendicularity of the cut as assessment criteria. Based on conducted experimental investigation the MCDM model with 27 alternatives (laser cuts and five criteria was developed. The relative importance of criteria was determined by using pair-wise comparison matrix and geometric mean method of the analytic hierarchy process (AHP method.

Material testing of copper by extrusion-cutting

DEFF Research Database (Denmark)

Segalina, F.; De Chiffre, Leonardo

2017-01-01

was developed and implemented on a CNC lathe. An investigation was carried out extrusion-cutting copper discs using high-speed-steel cutting tools at 100 m/min cutting speed. Flow stress values for copper under machining-relevant conditions were obtained from measurement of the extrusion-cutting force...

How clear-cutting affects fire severity and soil properties in a Mediterranean ecosystem.

Science.gov (United States)

Francos, Marcos; Pereira, Paulo; Mataix-Solera, Jorge; Arcenegui, Victoria; Alcañiz, Meritxell; Úbeda, Xavier

2018-01-15

Forest management practices in Mediterranean ecosystems are frequently employed to reduce both the risk and severity of wildfires. However, these pre-fire treatments may influence the effects of wildfire events on soil properties. The aim of this study is to examine the short-term effects of a wildfire that broke out in 2015 on the soil properties of three sites: two exposed to management practices in different years - 2005 (site M05B) and 2015 (site M15B) - and one that did not undergo any management (NMB) and to compare their properties with those recorded in a plot (Control) unaffected by the 2015 wildfire. We analyzed aggregate stability (AS), soil organic matter (SOM) content, total nitrogen (TN), carbon/nitrogen ratio (C/N), inorganic carbon (IC), pH, electrical conductivity (EC), extractable calcium (Ca), magnesium (Mg), sodium (Na), and potassium (K), microbial biomass carbon (C mic ) and basal soil respiration (BSR). In the managed plots, a clear-cutting operation was conducted, whereby part of the vegetation was cut and left covering the soil surface. The AS values recorded at the Control site were significantly higher than those recorded at M05B, whereas the TN and SOM values at NMB were significantly higher than those recorded at M05B. IC was significantly higher at M05B than at the other plots. There were no significant differences in C/N ratio between the analyzed sites. Soil pH at M05B was significantly higher than the value recorded at the Control plot. Extractable Ca was significantly higher at NMB than at both M05B and the Control, while extractable Mg was significantly lower at M05B than at NMB. Extractable K was significantly lower at the Control than at the three fire-affected plots. C mic was significantly higher at NMB than at the Control. BSR, BSR/C and BSR/C mic values at the fire-affected sites were significantly lower than those recorded at the Control. No significant differences were identified in C mic /C. Overall, a comparison of the

Baikov-Lee representations of cut Feynman integrals

International Nuclear Information System (INIS)

Harley, Mark; Moriello, Francesco; Schabinger, Robert M.

2017-01-01

We develop a general framework for the evaluation of d-dimensional cut Feynman integrals based on the Baikov-Lee representation of purely-virtual Feynman integrals. We implement the generalized Cutkosky cutting rule using Cauchy’s residue theorem and identify a set of constraints which determine the integration domain. The method applies equally well to Feynman integrals with a unitarity cut in a single kinematic channel and to maximally-cut Feynman integrals. Our cut Baikov-Lee representation reproduces the expected relation between cuts and discontinuities in a given kinematic channel and furthermore makes the dependence on the kinematic variables manifest from the beginning. By combining the Baikov-Lee representation of maximally-cut Feynman integrals and the properties of periods of algebraic curves, we are able to obtain complete solution sets for the homogeneous differential equations satisfied by Feynman integrals which go beyond multiple polylogarithms. We apply our formalism to the direct evaluation of a number of interesting cut Feynman integrals.

Restored drill cuttings for wetlands creation: Results of a two year mesocosm approach to emulate field conditions under varying hydrologic regimes

Energy Technology Data Exchange (ETDEWEB)

Shaffer, G.P.; Hester, M.W.; Miller, S.; DesRoches, D.J.; Souther, R.F.; Childers, G.W.; Campo, F.M.

1998-11-01

It is well documented that Louisiana has the highest rate of wetland loss in the United States. Deep-water channel dredging and leveeing of the Mississippi River since the 1930s have interrupted the natural delta cycle that builds new marshes through sediment deposition. Many of the areas that are subsiding and deteriorating are isolated from riverine sediment sources; therefore alternative methods to deposit sediment and build marshes must be implemented. This project demonstrates that the earthen materials produced when drilling oil and gas wells can be used as a suitable substrate for growing wetland plants. Drilling fluids (muds) are used to lubricate drill bits and stabilize the earth around drill holes and become commingled with the earthen cuttings. Two processes have been reported to restore drill cuttings to acceptable levels by removal of any toxic components found in drilling muds. The main objective of this project was to assess the potential of drill cuttings processed by these two methods in terms of their ability to support wetland vegetation and potential toxicity.

Comparison of cutting efficiency with different diamond burs and water flow rates in cutting lithium disilicate glass ceramic.

Science.gov (United States)

Siegel, Sharon C; Patel, Tejas

2016-10-01

This study compared different diamond burs and different water flow rates on the cutting efficiency of sectioning through lithium disilicate glass ceramic. The authors used a standardized cutting regimen with 4 brands of diamond burs to section through lithium disilicate glass ceramic blocks. Twelve diamonds of each brand cut through the blocks in randomized order. In the first part of the study, the authors recorded sectioning rates in millimeters per minute for each diamond bur as a measure of cutting efficiency. In the second part of the study, the authors compared sectioning rates using only 1 brand of diamond bur, with 3 different water flow rates. The authors averaged and compared cutting rates of each brand of diamond bur and the cutting rates for each flow rate using an analysis of variance and determined the differences with a Tukey honest significant difference test. One diamond bur cut significantly slower than the other 3, and one diamond bur cut significantly faster than 2 of the others. The diamond bur cutting efficiency through lithium disilicate glass ceramic with a 20 mL/min water flow rate was significantly higher than 15 mL/min. There are differences in cutting efficiency between diamond burs when sectioning lithium disilicate glass ceramic. Use a minimum of 20 mL/min of water coolant flow when sectioning lithium disilicate glass ceramic with dental diamond burs to maximize cutting efficiency. Recommendations for specific diamond burs with a coarse grit and water flow rate of 20 mL/min can be made when removing or adjusting restorations made from lithium disilicate glass ceramic. Copyright © 2016 American Dental Association. Published by Elsevier Inc. All rights reserved.

Comparative study of 0° X-cut and Y + 36°-cut lithium niobate high-voltage sensing

International Nuclear Information System (INIS)

Patel, N.; Branch, D. W.; Cular, S.; Schamiloglu, E.

2015-01-01

A comparison study between Y + 36° and 0° X-cut lithium niobate (LiNbO 3 ) was performed to evaluate the influence of crystal cut on the acoustic propagation to realize a piezoelectric high-voltage sensor. The acoustic time-of-flight for each crystal cut was measured when applying direct current (DC), alternating current (AC), and pulsed voltages. Results show that the voltage-induced shift in the acoustic wave propagation time scaled quadratically with voltage for DC and AC voltages applied to X-cut crystals. For the Y + 36° crystal, the voltage-induced shift scales linearly with DC voltages and quadratically with AC voltages. When applying 5 μs voltage pulses to both crystals, the voltage-induced shift scaled linearly with voltage. For the Y + 36° cut, the voltage-induced shift from applying DC voltages ranged from 10 to 54 ps and 35 to 778 ps for AC voltages at 640 V over the frequency range of 100 Hz–100 kHz. Using the same conditions as the Y + 36° cut, the 0° X-cut crystal sensed a shift of 10–273 ps for DC voltages and 189–813 ps for AC voltage application. For 5 μs voltage pulses, the 0° X-cut crystal sensed a voltage induced shift of 0.250–2 ns and the Y + 36°-cut crystal sensed a time shift of 0.115–1.6 ns. This suggests a frequency sensitive response to voltage where the influence of the crystal cut was not a significant contributor under DC, AC, or pulsed voltage conditions. The measured DC data were compared to a 1-D impedance matrix model where the predicted incremental length changed as a function of voltage. When the voltage source error was eliminated through physical modeling from the uncertainty budget, the combined uncertainty of the sensor (within a 95% confidence interval) decreased to 0.0033% using a Y + 36°-cut crystal and 0.0032% using an X-cut crystal for all the voltage conditions used in this experiment

Underwater laser cutting of metallic structures

International Nuclear Information System (INIS)

Alfille, J.P.; Schildknecht, J.; Ramaswami, V.S.

1993-01-01

In the frame of an european contract, the feasibility of the underwater cutting with a CO 2 laser power is studied. The aim of this work is the dismantling metallic structures of reactors pools. The paper analyzes the general concept of the experimental device, the underwater cutting head, the experimenting vessel, examples of cuttings in dismantling situation with a 500 W CO 2 laser, and examples of cuttings with a 5 kW CO 2 laser. (author). 2 refs., 9 figs., 2 tabs

Vegetation dynamics and dynamic vegetation science

NARCIS (Netherlands)

Van der Maarel, E

1996-01-01

his contribution presents a review of the development of the study of vegetation dynamics since 1979, in the framework of a jubilee meeting on progress in the study of vegetation. However, an exhaustive review is both impossible and unnecessary. It is impossible within the few pages available

Theoretical aspects of fibre laser cutting

Energy Technology Data Exchange (ETDEWEB)

Mahrle, A; Beyer, E, E-mail: achim.mahrle@iws.fraunhofer.d [University of Technology Dresden, Institute for Surface and Manufacturing Technology, PO Box, 01062 Dresden (Germany)

2009-09-07

Fibre lasers offer distinct advantages over established laser systems with respect to power efficiency, beam guidance and beam quality. Consequently, the potential of these new laser beam sources will be increasingly exploited for laser cutting applications that are conventionally carried out with CO{sub 2} lasers. However, theoretical estimates of the effective absorptivity at the cut front suggest that the shorter wavelength of the fibre laser in combination with its high focusability seems to be primarily advantageous for thin sheet metal cutting whereas the CO{sub 2} laser is probably still capable of cutting thicker materials more efficiently. This surprising result is a consequence of the absorptivity behaviour of metals that shows essential quantitative differences for the corresponding wavelengths of both laser sources as a function of the angle of incidence between the laser beam and the material to be cut. In evaluation of the revealed dependences, solution strategies for an improvement of the efficiency of fibre laser cutting of thicker metal sheets are suggested.

Vegetation survey: a new focus for Applied Vegetation Science

NARCIS (Netherlands)

Chytry, M.; Schaminee, J.H.J.; Schwabe, A.

2011-01-01

Vegetation survey is an important research agenda in vegetation science. It defines vegetation types and helps understand differences among them, which is essential for both basic ecological research and applications in biodiversity conservation and environmental monitoring. In this editorial, we

A Numerical Approach and Comparison of Cutting Forces and Chip Morphology in Orthogonal Cutting of Light Alloys

International Nuclear Information System (INIS)

Alvarez, Roberto; Domingo, Rosario; Sebastian, Miguel Angel

2011-01-01

This paper deals with the simulation of UNS A92024 aluminium alloy cutting processes. In particular, 2D and 3D Finite Element Method (FEM) simulations were carried out in order to estimate cutting forces and chip morphology during turning operations. The material is modelled with two different set of parameters for the Johnson--Cook's (J-C) constitutive equation and a failure Cockroft and Latham's model exploited considers damage. The comparison between the predicted chip morphology and principal cutting forces at varying of J-C parameters and cutting regimes with those experimentally found are presented and discussed. The paper shows the importance of damage criterion in the cutting forces, during the simulation, especially in 3D.

Laser cutting of sheets for Tailored Blanks

DEFF Research Database (Denmark)

Bagger, Claus; Olsen, Flemming Ove

1999-01-01

sound welds. Laser cutting the sheets may therefore be an alternative to shear cutting, if the cut kerf squareness can be kept below 0.05 mm.In a number of systematic laboratory experiments the effects of the major process parameters in laser cutting have been investigated. Each cut was quantified...... by the squareness, the surface roughness and the burr height. Mild steel as well as high strength steel with and with out galvanisation with thickness' of 0.7(5) and 1.25 were used.In the tests the difference in cut quality between a 5" and a 7.5" focusing lens were tested and the effect of using pulsed mode laser...

Cutting prepregs, cutting and processing polymer plastics in the manufacture of airсraft panels

OpenAIRE

MELUKHOV NIKITA; GRISHCHENKO TATIANA; LYUBUSHKIN VADIM

2017-01-01

The article presents an alternative to the solution of the problem of reduction of manual operations in manufacture. It may be achieved if cutting out prepregs and processing polymeric materials (PMP) be changed for sharp ultrasonic cutting when manufacturing components from polymeric composite materials (PCM). Described are the lines of investigations on new techniques of cutting out prepreg and processings polymeric material of the Nomex type with the use of the energy of ultrasonic waves. ...

Semantic Versus Syntactic Cutting Planes

OpenAIRE

Filmus, Yuval; Hrubeš, Pavel; Lauria, Massimo

2016-01-01

In this paper, we compare the strength of the semantic and syntactic version of the cutting planes proof system. First, we show that the lower bound technique of Pudlák applies also to semantic cutting planes: the proof system has feasible interpolation via monotone real circuits, which gives an exponential lower bound on lengths of semantic cutting planes refutations. Second, we show that semantic refutations are stronger than syntactic ones. In particular, we give a formula for whic...

21 CFR 882.4275 - Dowel cutting instrument.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Dowel cutting instrument. 882.4275 Section 882...) MEDICAL DEVICES NEUROLOGICAL DEVICES Neurological Surgical Devices § 882.4275 Dowel cutting instrument. (a) Identification. A dowel cutting instrument is a device used to cut dowels of bone for bone grafting. (b...

High speed laser cutting machine. Kosoku reza kakoki

Energy Technology Data Exchange (ETDEWEB)

Shinno, N. (Matsushita Electric Industrial Co. Ltd., Kadoma, Osaka (Japan))

1993-11-01

The carbon dioxide gas laser cutting machine is being used widely for from cutting soft steel and stainless steel, etc. to intermetallic welding and in the field of cutting in particular, concerning sheet cutting, it has been changing the existing monopoly of the turret punch press, and as for medium and thick plate cutting, that of the gas plasma fusing device. This article is the general description of high speed laser cutting machine. Concerning the laser cutting (sheet cutting in particular), as the essential items for securing severe cutting accuracy and, at the same time, improving the cutting speed, the following matters are picked up for respective explanation; improvement of stationary machine accuracy, improvement of dynamic machine accuracy, improvement of quality of laser beam as well as optimization of cutting conditions, and shortening of piercing time. Also explanation is given to the respective items, namely speeding-up of medium and thick plate cutting, and reduction of load onto the operator by improved operation. Finally, feeding and removing of a sheet only, and feeding and removing with a pallet are mentioned as the efforts for automation and energy saving. 3 figs., 1 tab.

STRUCTURE AND COMPOSITION OF THE REGENERATION STRATUM AND ASSOCIATED VEGETATION OF DIFFERENT SUCCESSION STAGES IN EAST OF PARANÁ STATE

Directory of Open Access Journals (Sweden)

Marco Antonio Gomes Souto

2011-09-01

Full Text Available In recent decades, the human activities caused the overall decline in biodiversity and, to understand the impacts on plant communities, it is necessary to analyze the regenerative potential of the forest. Studies on the floristic composition and the structure of the guild of seedlings in different succession stages and historical conditions can describe the patterns of species replacement and help understand the forest dynamics. Thus, the objective of this study was to compare floristic and structural layer of the regeneration and associated vegetation in two succession stages of two areas with different historical uses located in the city of Campina Grande do Sul, in Paraná state. Seedlings were collected in two fragments of the secondary forest at the initial and at the intermediate stages, with historical use of clear and selective cuts, respectively. One-hundred and six plots of 0,16 m² were delimited and all individual plants with up to 10 - 50 cm high were collected, identified, quantified and divided into two groups: seedlings of tree species and species associated for the phytosociological analysis. The species were also classified according to their habits, dispersion mode and succession stages and the floristic similarity between areas was established by Sorensen’s, Bray & Curtis’ and Morisita-Horn’s indices. The analysis suggests a possible influence of historical use and the successional stages of regeneration and the associated vegetation. The analysis of similarity indicates a gradient of regeneration, in which the intermediate stage of the clear cut area is similar to the early stage of the selective cutting area.

Identification of the immunogenic spore and vegetative proteins of Bacillus anthracis vaccine strain A16R.

Directory of Open Access Journals (Sweden)

Xiankai Liu

Full Text Available Immunoproteomics was used to screen the immunogenic spore and vegetative proteins of Bacillus anthracis vaccine strain A16R. The spore and vegetative proteins were separated by 2D gel electrophoresis and transferred to polyvinylidene difluoride membranes, and then western blotting was performed with rabbit immune serum against B.anthracis live spores. Immunogenic spots were cut and digested by trypsin. Matrix-assisted laser desorption ionization time-of-flight mass spectrometry was performed to identify the proteins. As a result, 11 and 45 immunogenic proteins were identified in the spores and vegetative cells, respectively; 26 of which have not been reported previously. To verify their immunogenicity, 12 of the identified proteins were selected to be expressed, and the immune sera from the mice vaccinated by the 12 expressed proteins, except BA0887, had a specific western blot band with the A16R whole cellular lytic proteins. Some of these immunogenic proteins might be used as novel vaccine candidates themselves or for enhancing the protective efficacy of a protective-antigen-based vaccine.

Final cutting of shelterwood. Harvesting techniques and effects on the Picea abies regeneration

International Nuclear Information System (INIS)

Gloede, Dan

2001-01-01

During the last decade, environmental and biological aspects have grown increasingly important in forestry. At the same time conventional planting after clear-cutting has failed on many sites with a high ground water table, abundant competitive vegetation and frequent frosts. Therefore, on these sites the use of the shelterwood system for regeneration of Norway spruce (Picea abies [L.] Karst.) has increased in Sweden. The main objective of the thesis is to study if it is possible to final-cut shelterwoods at acceptable harvesting costs, logging damage and release effects in the regeneration. Final cutting of three shelterwoods (180-200 m 3 /ha) in Sweden were carried out with single- and double-grip harvester systems in 1-1.5 m high regeneration (6 400-26 700 seedlings/ha). In a fourth shelterwood (140-165 m 3 /ha), also situated in Sweden, conventional felling with a single-grip harvester was compared with a more concentrated felling according to a method named 'tossing the caber', where the trees were felled top-end first over the 1.2-1.3 m high regeneration (9 530-11 780 seedlings/ha) and into the striproad. No differences in productivity and cost between single- and double-grip harvesters in final cutting of shelterwood were found. Despite few stems/ha and extensive regeneration the harvesting cost was considered low (33.5 SEK/m 3 ). Approximately one third of the seedlings suffered mortal logging damage, which was considered acceptable. No differences between conventional felling and the tossing the caber method were found regarding productivity, cost and damage to the regeneration. However, tossing the caber may be a more productive alternative in final cutting of pine-dominated shelterwood or seed tree stands. Seedling growth and survival after shelterwood removal was not influenced by the choice of harvester system. Seedling height and vitality were found to be good estimators of post-release survival and growth which, in total, was found to be acceptable

A comparison RSM and ANN surface roughness models in thin-wall machining of Ti6Al4V using vegetable oils under MQL-condition

Science.gov (United States)

Mohruni, Amrifan Saladin; Yanis, Muhammad; Sharif, Safian; Yani, Irsyadi; Yuliwati, Erna; Ismail, Ahmad Fauzi; Shayfull, Zamree

2017-09-01

Thin-wall components as usually applied in the structural parts of aeronautical industry require significant challenges in machining. Unacceptable surface roughness can occur during machining of thin-wall. Titanium product such Ti6Al4V is mostly applied to get the appropriate surface texture in thin wall designed requirements. In this study, the comparison of the accuracy between Response Surface Methodology (RSM) and Artificial Neural Networks (ANN) in the prediction of surface roughness was conducted. Furthermore, the machining tests were carried out under Minimum Quantity Lubrication (MQL) using AlCrN-coated carbide tools. The use of Coconut oil as cutting fluids was also chosen in order to evaluate its performance when involved in end milling. This selection of cutting fluids is based on the better performance of oxidative stability than that of other vegetable based cutting fluids. The cutting speed, feed rate, radial and axial depth of cut were used as independent variables, while surface roughness is evaluated as the dependent variable or output. The results showed that the feed rate is the most significant factors in increasing the surface roughness value followed by the radial depth of cut and lastly the axial depth of cut. In contrary, the surface becomes smoother with increasing the cutting speed. From a comparison of both methods, the ANN model delivered a better accuracy than the RSM model.

Regeneration of vegetation on wetland crossings for gas pipeline rights-of-way one year after construction

International Nuclear Information System (INIS)

Shem, L.M.; Zimmerman, R.E.; Zellmer, S.D.; Van Dyke, G.D.; Rastorfer, J.R.

1993-01-01

Four wetland crossings of gas pipeline rights-of-way (ROWs), located in Florida, Michigan, New Jersey, and New York, were surveyed for generation of vegetation roughly one year after pipeline construction was completed. Conventional trench-and-fill construction techniques were employed for all four sites. Estimated areal coverage of each species by vegetative strata within transect plots was recorded for plots on the ROW and in immediately adjacent wetlands undisturbed by construction activities. Relative success of regeneration was measured by percent exposed soil, species diversity, presence of native and introduced species, and hydric characteristics of the vegetation. Variable site factors included separation and replacement of topsoil, final grading of the soil, application of seed and fertilizer, and human disturbance unrelated to construction. Successful regeneration exhibited greater dependency on the first three factors listed

Improving rooting uniformity in rose cuttings

NARCIS (Netherlands)

Telgen, van H.J.; Eveleens-Clark, B.A.; Garcia Victoria, N.

2007-01-01

Studies to improve rooting uniformity of single node stem cuttings for rose are reported. We found that the variation in shoot growth in a young rose crop depended on the variation in root number of the cuttings, which, in turn, was related to the auxin concentration applied to the cutting before

Identification and gene expression analysis of AUX1 influencing adventitious root induction in olive cuttings (Olea europaea L.

Directory of Open Access Journals (Sweden)

Seyed Mehdi Hosseini Mazinani

2014-12-01

Full Text Available Olive is one of the most important fruit crops throughout the Mediterranean Basin, mainly propagated by cuttings. The adventitious root development is a key stage in vegetative propagation however the low rooting capacity of some cultivars severely affects the efficiency of olive clonal propagation. Auxin Influx Carrier gene (AUX1, plays a key role in lateral root formation in many plant species promoting the export of IAA from newly developing leaves to lateral root primordia. Putative olive homologues were amplified by using degenerate primers designed on the conserved regions of AUX1 transcripts identified in other plants. Transcript and amino acid sequences in root (OeAUX1R and base of cutting (OeAUX1B were different causes of polymorphisms relating to possible distinct roles in these tissues. In order to investigate the gene expression patterns, Real-time PCR was performed on cuttings during the rooting stage collected from genotypes characterized by high and low rooting ability. Moreover, the gene expression was investigated on different olive tissues. Preliminary results showed that the expression of OeAUX1B and OeAUX1R in base of cuttings and roots of the high-rooting genotype were higher which suggests the hypothesis of the involvement of OeAUX1 in olive rooting. Bioinformatics analysis revealed that AUX1 gene had 8 exons in olive and the sequence of this gene in plant was conserved during evolution.

Combined effect of gamma radiation and some fungal control agents on the greasy cut- worm

International Nuclear Information System (INIS)

Abd EL- Wahed, A. G.

2011-01-01

The greasy cut worm, Agrotis ipsilon (Lepidoptera- Noctuidae) is widely distributed all over the world, particularly in moderate and subtropical countries of the northern and southern hemispheres (Kononenko ,2003). The greasy cut worm causes damage to vegetables, cucurbitaceous and industrial crops. The greatest damage is caused to cotton, essential-oil cultures, maize, tobacco, sunflower, tomatoes, sugar beet and potato. The pest can strongly harm vegetables, and also damage seedlings of tree species (pine, maple, and nut). This pest has solitary habits. They commonly feed on seedlings at ground level, cutting off the stem and sometimes dragging the plants into their burrows. The continuous use of chemical pesticides against pests, resistance to the action of pesticides had dramatically evolved. Also, the extensive use of these chemicals has given rise to problems such as residual toxicity (pollution) and harmful effects on beneficial insects, which are natural enemies of target or nontarget pest species. Such problems have become a cause of search for safety pesticides including microbial agents as fungi, bacteria and viruses (Rashed, 1993). The use of radiation to induce dominate lethal mutations in the sterile insect technique (SIT) is now as the major component of many large and successful programs for pest suppression and eradication. Adult insects, and their different developmental stages, differ in their sensitivity to the induction of dominate lethal mutation. Care has to be taken to identify the appropriate dose of radiation that produces the required level of sterility without impairing the overall fitness of the released insects.(Sawires, 2005). This technique would be successful control device for suppressing and combating many lepidopteraus insect pests, including A. Ipsilon has been studied (EL- kady et al., 1983, EL-Naggar et al., 1984, Abd El -Hamid 2004 and Gabarty, 2008). Entomopathogenic fungi that infect insects have received considerable

Underwater laser cutting of metal structures

Energy Technology Data Exchange (ETDEWEB)

Alfille, J.P.; Prunele, D. de [CEA Centre d`Etudes de Saclay, 91 - Gif-sur-Yvette (France). Direction des Technologies Avancees; Pilot, G. [CEA Centre d`Etudes de Fontenay-aux-Roses, 92 (France). Dept. de Protection de l`Environnement et des Installations; Fredrick, P.; Ramaswami, V.S.; Muys, P. [Radius Engineering, Gent (Belgium)

1994-12-31

Cutting tests were carried out on stainless steel (304L) in air and under 7 meters of water (application to reactor pools), using CO{sub 2} and YAG lasers; results concerned cutting speed, quality of cut, cutting thickness. By-products of sectioning operations using a CO{sub 2} laser were studied: dross, aerosols, suspended particles in water, gas analysis, chemical analysis of the aerosols. Same measurements are currently being taken in the case of the YAG laser with beam transported via optical fiber. (from author). 16 figs., 2 tabs., 3 refs.

Underwater laser cutting of metal structures

International Nuclear Information System (INIS)

Alfille, J.P.; Prunele, D. de

1994-01-01

Cutting tests were carried out on stainless steel (304L) in air and under 7 meters of water (application to reactor pools), using CO 2 and YAG lasers; results concerned cutting speed, quality of cut, cutting thickness. By-products of sectioning operations using a CO 2 laser were studied: dross, aerosols, suspended particles in water, gas analysis, chemical analysis of the aerosols. Same measurements are currently being taken in the case of the YAG laser with beam transported via optical fiber. (from author). 16 figs., 2 tabs., 3 refs

The Effect of Muscle Fiber Direction on the Cut Surface Angle of Frozen Fish Muscular Tissue Cut by Bending Force

OpenAIRE

岡本, 清; 羽倉, 義雄; 鈴木, 寛一; 久保田, 清

1996-01-01

We have proposed a new cutting method named "Cryo-cutting" for frozen foodstuffs by applying a bending force instead of conventional cutting methods with band saw. This paper investigated the effect of muscle fiber angle (θf) to cut surface angle (θs) of frozen tuna muscular tissue at -70, -100 and -130°C for the purpose of evaluating the applicability of the cryo-cutting method to frozen fishes. The results were as follows : (1) There were two typical cutting patterns ("across the muscle fib...

Vegetation inventory, mapping, and classification report, Fort Bowie National Historic Site

Science.gov (United States)

Studd, Sarah; Fallon, Elizabeth; Crumbacher, Laura; Drake, Sam; Villarreal, Miguel

2013-01-01

ephemeral washes dominated by Ash (Fraxinus), Walnut (Juglans) and Hackberry (Celtis) to drier upland sites typical of desert scrub and semi-desert grassland communities. These shrublands boast a diverse mixture of shrubs, succulents and perennial grasses. In many places the vegetation could be seen to echo the history of the fort site, with management of shrub encroachment apparent in the grasslands and the paucity of trees evidence of historic cutting for timber and fire wood. Seven of the 16 vegetation types were ‘accepted’ types within the NVC while the others have been described here as specific to FOBO and have proposed status within the NVC. The map was designed to facilitate ecologically-based natural resources management and research. The map is in digital format within a geodatabase structure that allows for complex relationships to be established between spatial and tabular data, and makes accessing the product easy and seamless. The GIS format allows user flexibility and will also enable updates to be made as new information becomes available (such as revised NVC codes or vegetation type names) or in the event of major disturbance events that could impact the vegetation.

Serving vegetables first: A strategy to increase vegetable consumption in elementary school cafeterias.

Science.gov (United States)

Elsbernd, S L; Reicks, M M; Mann, T L; Redden, J P; Mykerezi, E; Vickers, Z M

2016-01-01

Vegetable consumption in the United States is low despite the wealth of evidence that vegetables play an important role in reducing risk of various chronic diseases. Because eating patterns developed in childhood continue through adulthood, we need to form healthy eating habits in children. The objective of this study was to determine if offering vegetables before other meal components would increase the overall consumption of vegetables at school lunch. We served kindergarten through fifth-grade students a small portion (26-33 g) of a raw vegetable (red and yellow bell peppers) while they waited in line to receive the rest of their lunch meal. They then had the options to take more of the bell peppers, a different vegetable, or no vegetable from the lunch line. We measured the amount of each vegetable consumed by each child. Serving vegetables first greatly increased the number of students eating vegetables. On intervention days most of the vegetables consumed came from the vegetables-first portions. Total vegetable intake per student eating lunch was low because most students chose to not eat vegetables, but the intervention significantly increased this value. Serving vegetables first is a viable strategy to increase vegetable consumption in elementary schools. Long-term implementation of this strategy may have an important impact on healthy eating habits, vegetable consumption, and the health consequences of vegetable intake. Copyright © 2015 Elsevier Ltd. All rights reserved.

Are the same tapes really the same? Ultrasound study of laser-cut and mechanically cut TVT-O post-operative behavior.

Science.gov (United States)

Rusavy, Zdenek; Masata, Jaromir; Svabik, Kamil; Hubka, Petr; Zvara, Karel; Martan, Alois

2017-11-25

TVT-O production has been modified to laser cutting from mechanical cutting. We compared the behavior of laser and mechanically cut tension-free vaginal tape-obturator (TVT-O) using ultrasound at various time points after surgery. This is a retrospective analysis of clinical and ultrasound data from two previously reported randomized controlled trials with TVT-O. Behavior of mechanically cut TVT-O implanted in January 2007 to November 2009 and laser-cut TVT-O implanted in May 2010 to May 2012 was assessed by ultrasound at day 1, the 2nd week, the 3rd month, and the 1st and 2nd years post-operatively. Bladder neck and tape margins positions were described by coordinates in the orthogonal system calculated from polar coordinates. Tape mobility was measured as a change in the upper and lower tape margin position from rest to maximal Valsalva. Comparison of 2-year subjective and objective surgery outcomes was also performed. In total, 68 mechanically cut and 50 laser-cut TVT-Os were implanted. Follow-up data were available from 49 and 45 women respectively. No differences in any baseline characteristics or bladder neck mobility were observed. Significantly lower tape mobility was observed on day 1 and week 2 after mechanically cut TVT-O, although subsequent mobility was comparable to laser-cut TVT-O. The subjective and objective surgery outcomes were comparable. Although without clinical significance, early postoperative behavior of the mechanically cut and laser-cut TVT-O tapes differs. The less stiff, mechanically-cut TVT-O loosens within 2 weeks of implantation, whereas the stiffer, laser-cut TVT-O keeps its tension.

Effects of cutting and maturity on lycopene concentration of fresh-cut tomatoes during storage at different temperatures

NARCIS (Netherlands)

Moreira Lana, M.; Dekker, M.; Linssen, R.F.A.; Kooten, van O.

2005-01-01

To investigate the changes in lycopene concentration of fresh-cut tomato during storage, tomato fruits at different stages of maturity were cut into 7 mm slices and stored at temperatures varying from 2°C to 16°C. To assess the effect of cutting, intact fruit were stored in an additional experiment

A phyt osociological classification of the vegetation of the Jack Scott Nature Reserve*

Directory of Open Access Journals (Sweden)

B. J. Coetzee

1974-12-01

Full Text Available The vegetation of the Jack Scott Nature Reserve in the Central Bankenveld Veld Type is classified chiefly by the Braun-Blanquet Table Method. Habitat features, physiognomy, total floristic composition, differentiating species, woody plants and prominent grasses and forbs are presented for each community. Characterizing habitat features, in order of importance for the communities, are: exposure, soil texture, geology, slope, aspect, degree of rockiness and previous ploughing. The classification correlates well with the major physiographic and climatic variation in the Reserve and generally does not cut across main physiognomic types. The communities are potentially homogeneous management units.

Underwater plasma arc cutting

International Nuclear Information System (INIS)

Leautier, R.; Pilot, G.

1991-01-01

This report describes the work done to develop underwater plasma arc cutting techniques, to characterise aerosols from cutting operations on radioactive and non-radioactive work-pieces, and to develop suitable ventilation and filtration techniques. The work has been carried out in the framework of a contract between CEA-CEN Cadarache and the Commission of European Communities. Furthermore, this work has been carried out in close cooperation with CEA-CEN Saclay mainly for secondary emissions and radioactive analysis. The contract started in May 1986 and was completed in December 1988 by a supplementary agreement. This report has been compiled from several progress reports submitted during the work period, contains the main findings of the work and encloses the results of comparative tests on plasma arc cutting

Modified GrabCut for human face segmentation

Directory of Open Access Journals (Sweden)

Dina Khattab

2014-12-01

Full Text Available GrabCut is a segmentation technique for 2D still color images, which is mainly based on an iterative energy minimization. The energy function of the GrabCut optimization algorithm is based mainly on a probabilistic model for pixel color distribution. Therefore, GrabCut may introduce unacceptable results in the cases of low contrast between foreground and background colors. In this manner, this paper presents a modified GrabCut technique for the segmentation of human faces from images of full humans. The modified technique introduces a new face location model for the energy minimization function of the GrabCut, in addition to the existing color one. This location model considers the distance distribution of the pixels from the silhouette boundary of a fitted head, of a 3D morphable model, to the image. The experimental results of the modified GrabCut have demonstrated better segmentation robustness and accuracy compared to the original GrabCut for human face segmentation.

Materials selection for cutting tools

International Nuclear Information System (INIS)

Burkhis, Adel M.

2008-01-01

The selection of proper tool steel for a given application is a difficult task. So; the most important selection factors in choosing cutting tool materials are based on their tool material requirements, cutting tool design and service conditions which is mainly considered as functional requirements. The processability requirements concerns in heat treat ability of the material tool. The classification of these tool materials were discussed with their properties requirement and percent of alloying element which is added to give best properties with a little increase in cost that highly appear in comparison of the selection. The cutting tool materials were evaluated based on two cases; The first was in case of rough surface; the high speed steels is the best material and the other was the ceramic material is the highest performance in cutting of soft or high rate of metal removal. (author)

Edge Cut Domination, Irredundance, and Independence in Graphs

OpenAIRE

Fenstermacher, Todd; Hedetniemi, Stephen; Laskar, Renu

2016-01-01

An edge dominating set $F$ of a graph $G=(V,E)$ is an \\textit{edge cut dominating set} if the subgraph $\\langle V,G-F \\rangle$ is disconnected. The \\textit{edge cut domination number} $\\gamma_{ct}(G)$ of $G$ is the minimum cardinality of an edge cut dominating set of $G.$ In this paper we study the edge cut domination number and investigate its relationships with other parameters of graphs. We also introduce the properties edge cut irredundance and edge cut independence.

Preferences of cut flowers consumers

Directory of Open Access Journals (Sweden)

Sylwia Kierczyńska

2010-01-01

Full Text Available The results of interviews suggest that majority of the cut flowers’ consumers has favourite kind of flower, among which most frequently pointed one was the rose. More than half of the interviewed favour the uniform colour of cut flowers and red colour was the most favourite one. The subtle smell of flowers was the most preferable one but the intensive fragrance was favoured for more consumers than odourless flowers. The data from selected florists’ confirm the information from interviews – in spite of the occasion, roses were the most demanded cut flowers.

Designing for hot-blade cutting

DEFF Research Database (Denmark)

Brander, David; Bærentzen, Jakob Andreas; Clausen, Kenn

2016-01-01

In this paper we present a novel method for the generation of doubly-curved, architectural design surfaces using swept Euler elastica and cubic splines. The method enables a direct design to production workflow with robotic hot-blade cutting, a novel robotic fabrication method under development......-trivial constraints of blade-cutting in a bottom-up fashion, enabling an exploration of the unique architectural potential of this fabrication approach. The method is implemented as prototype design tools in MatLAB, C++, GhPython, and Python and demonstrated through cutting of expanded polystyrene foam design...

Status on underwater plasma arc cutting in KHI, 3

International Nuclear Information System (INIS)

Abe, Tadashi; Aota, Toshiichi; Nishizaki, Tadashi; Nakayama, Shigeru; Yamashita, Seiji

1983-01-01

In Kawasaki Heavy Industries, Ltd., the development of a remote dismantling system by underwater plasma arc cutting process has been advanced, expecting its application to the dismantling and removal of nuclear reactor facilities. In the previous two reports, the fundamental experimental results such as the comparison of the cutting capability in air and in water were shown, but this time, the remote automatic cutting of wedge-shaped specimens was carried out, using a newly installed manipulator for underwater works, therefore its outline is reported. Also the cutting experiment by overhead position and vertical position was performed by using the same equipment, and comparison was made with the cutting capability by downhand and horizontal positions. It is important to grasp the cutting characteristics in the case of upward advancing and downward advancing cuttings by overhead and vertical positions when the cutting of pressure vessels and horizontal pipes into rings is supposed. The experimental apparatus, the cutting conditions, the testing method and the test results of the cutting capability test, the test of changing direction during cutting, and the remote cutting of pipes into rings are described. The underwater plasma arc cutting can cut all metals, the cutting speed is relatively high, and the apparatus is simple and compact. (Kako, I.)

MECHANISMS OF CUTTING BLADE WEAR AND THEIR INFLUENCE ON CUTTING ABILITY OF THE TOOL DURING MACHINING OF SPECIAL ALLOYS

Directory of Open Access Journals (Sweden)

Tomáš Zlámal

2016-09-01

Full Text Available With increased requirements for quality and shelf life of machined parts there is also a higher share of the use of material with specific properties that are identified by the term “superalloys”. These materials differ from common steels by mechanical and physical properties that cause their worse machinability. During machining of “superalloys” worse machinability has negative influence primarily on the amount of cutting edge wear, which shortens durability of the cutting tool. The goal of experimental activity shown in this contribution is to determine individual mechanisms of the cutting edge wear and their effects on the cutting ability during high speed machining of nickel superalloy. A specific exchangeable cutting insert made from cubic boric nitride was used for machining of the 625 material according to ASM 5666F. The criteria to evaluate cutting ability and durability of the cutting tool became selected parameters of surface integrity and quality of the machined surface.

Submerged cutting characteristics of abrasive suspension jet

International Nuclear Information System (INIS)

Shimizu, Seiji; Peng, Guoyi; Oguma, Yasuyuki; Nishikata, Hiroki

2015-01-01

An abrasive suspension jet (ASJ) formed by propelling abrasive suspension through a nozzle has a greater cutting capability than the conventional abrasive water jet. However the cutting capability of submerged ASJs decreases drastically with increasing the standoff distance and the pressure around the jet. A sheathed nozzle nozzle with ventilation for ASJs has been developed as a mean of extending the effective stand-off distance and improving the cutting capabilities under submerged condition. In the present investigation, cutting tests by ASJs in air and under submerged condition are conducted with specimens of aluminum alloy. Air coated ASJs are formed by using a sheathed nozzle with ventilation. The relative cutting depth is defined as the cutting depth is arranged effectually by the cavitation number based on the cavity pressure measured at the sheath. (author)

Vegetation productivity responses to drought on tribal lands in the four corners region of the Southwest USA

Science.gov (United States)

El-Vilaly, Mohamed Abd Salam; Didan, Kamel; Marsh, Stuart E.; van Leeuwen, Willem J. D.; Crimmins, Michael A.; Munoz, Armando Barreto

2018-03-01

For more than a decade, the Four Corners Region has faced extensive and persistent drought conditions that have impacted vegetation communities and local water resources while exacerbating soil erosion. These persistent droughts threaten ecosystem services, agriculture, and livestock activities, and expose the hypersensitivity of this region to inter-annual climate variability and change. Much of the intermountainWestern United States has sparse climate and vegetation monitoring stations, making fine-scale drought assessments difficult. Remote sensing data offers the opportunity to assess the impacts of the recent droughts on vegetation productivity across these areas. Here, we propose a drought assessment approach that integrates climate and topographical data with remote sensing vegetation index time series. Multisensor Normalized Difference Vegetation Index (NDVI) time series data from 1989 to 2010 at 5.6 km were analyzed to characterize the vegetation productivity changes and responses to the ongoing drought. A multi-linear regression was applied to metrics of vegetation productivity derived from the NDVI time series to detect vegetation productivity, an ecosystem service proxy, and changes. The results show that around 60.13% of the study area is observing a general decline of greenness ( pchallenges to the region's already stressed ecosystems. Whereas the results provide additional insights into this isolated and vulnerable region, the drought assessment approach used in this study may be adapted for application in other regions where surface-based climate and vegetation monitoring record is spatially and temporally limited.

Transfer of radioactive caesium from soil to vegetation and comparison with potassium in upland grasslands

International Nuclear Information System (INIS)

Coughtrey, P.J.; Kirton, J.A.; Mitchell, N.G.; Morris, C.

1989-01-01

The distribution and transfer of caesium and potassium between soils and vegetation has been investigated by field sampling and experimental studies on soils and vegetation typical of upland grassland in north west England. Total 137 Cs content to a depth of 0.05 m below root matt ranged from 13 000 to 18 000 Bq m -2 . This caesium content derives from three sources: the Windscale accident of 1957, weapons-testing fallout which peaked in the early 1960s, and the Chernobyl accident in May 1986. From 2200 to 6200 Bq m -2 is attributed to the first two sources, and the remainder to Chernobyl. During accelerated growth of vegetation, on monoliths in glasshouse conditions over the winter of 1986/87, 137 Cs was transferred from soil and root matt to new growth, such that concentrations in fresh growth were similar to or higher than those observed in the field during December 1986. Removal of caesium by successive cuts resulted in up to 25% of the original estimated total being removed over a 240 day period. Increased concentrations coincided with the emergence of Carex sp. and Trichophorum caespitosum, as well

Ann modeling of kerf transfer in Co2 laser cutting and optimization of cutting parameters using monte carlo method

Directory of Open Access Journals (Sweden)

Miloš Madić

2015-01-01

Full Text Available In this paper, an attempt has been made to develop a mathematical model in order to study the relationship between laser cutting parameters such as laser power, cutting speed, assist gas pressure and focus position, and kerf taper angle obtained in CO2 laser cutting of AISI 304 stainless steel. To this aim, a single hidden layer artificial neural network (ANN trained with gradient descent with momentum algorithm was used. To obtain an experimental database for the ANN training, laser cutting experiment was planned as per Taguchi’s L27 orthogonal array with three levels for each of the cutting parameters. Statistically assessed as adequate, ANN model was then used to investigate the effect of the laser cutting parameters on the kerf taper angle by generating 2D and 3D plots. It was observed that the kerf taper angle was highly sensitive to the selected laser cutting parameters, as well as their interactions. In addition to modeling, by applying the Monte Carlo method on the developed kerf taper angle ANN model, the near optimal laser cutting parameter settings, which minimize kerf taper angle, were determined.

The effects of cutting parameters on cutting forces and heat generation when drilling animal bone and biomechanical test materials.

Science.gov (United States)

Cseke, Akos; Heinemann, Robert

2018-01-01

The research presented in this paper investigated the effects of spindle speed and feed rate on the resultant cutting forces (thrust force and torque) and temperatures while drilling SawBones ® biomechanical test materials and cadaveric cortical bone (bovine and porcine femur) specimens. It also investigated cortical bone anisotropy on the cutting forces, when drilling in axial and radial directions. The cutting forces are only affected by the feed rate, whereas the cutting temperature in contrast is affected by both spindle speed and feed rate. The temperature distribution indicates friction as the primary heat source, which is caused by the rubbing of the tool margins and the already cut chips over the borehole wall. Cutting forces were considerably higher when drilling animal cortical bone, in comparison to cortical test material. Drilling direction, and therewith anisotropy, appears to have a negligible effect on the cutting forces. The results suggest that this can be attributed to the osteons being cut at an angle rather than in purely axial or radial direction, as a result of a twist drill's point angle. Copyright © 2017 IPEM. Published by Elsevier Ltd. All rights reserved.

[Effects of selective cutting on the carbon density and net primary productivity of a mixed broadleaved-Korean pine forest in Northeast China].

Science.gov (United States)

Liu, Qi; Cai, Hui-Ying; Jin, Guang-Ze

2013-10-01

To accurately quantify forest carbon density and net primary productivity (NPP) is of great significance in estimating the role of forest ecosystems in global carbon cycle. By using the forest inventory and allometry approaches, this paper measured the carbon density and NPP of the virgin broadleaved-Korean pine (Pinus koraiensis) forest and of the broadleaved-Korean pine forest after 34 years selective-cutting (the cutting intensity was 30%, and the cutting trees were in large diameter class). The total carbon density of the virgin and selective-cutting broadleaved-Korean pine forests was (397.95 +/- 93.82) and (355.61 +/- 59.37) t C x hm(-2), respectively. In the virgin forest, the carbon density of the vegetation, debris, and soil accounted for 31.0%, 3.1%, and 65.9% of the total carbon pool, respectively; in the selective-cutting forest, the corresponding values were 31.7%, 2.9%, and 65.4%, respectively. No significant differences were observed in the total carbon density and the carbon density of each component between the two forests. The total NPP of the virgin and selective-cutting forests was (36.27 +/- 0.36) and (6.35 +/- 0.70) t C x hm(-2) x a(-1), among which, the NPP of overstory, understory, and fine roots in virgin forest and selective-cutting forest accounted for 60.3%, 2.0%, and 37.7%, and 66.1%, 2.0%, and 31.2%, respectively. No significant differences were observed in the total NPP and the contribution rate of each component between the two forests. However, the ratios of the needle and broadleaf NPPs of the virgin and selective-cutting forests were 47.24:52.76 and 20.48:79.52, respectively, with a significant difference. The results indicated that the carbon density and NPP of the broadleaved-Korean pine forest after 34 years selective-cutting recovered to the levels of the virgin broadleaved-Korean pine forest.

Impact of tree cutting on water-soluble organic compounds in podzolic soils of the European North-East

Science.gov (United States)

Lapteva, Elena; Bondarenko, Natalia; Shamrikova, Elena; Kubik, Olesya; Punegov, Vasili

2016-04-01

Water-soluble organic compounds (WOCs) and their single components, i.e. low-molecular organic acids, alcohols, and carbohydrates, attain a great deal of attention among soil scientists. WOCs are an important component of soil organic matter (SOM) and form as a results of different biological and chemical processes in soils. These processes are mainly responsible for formation and development of soils in aboveground ecosystems. The purpose of the work was identifying qualitative and quantitative composition of low-molecular organic substances which form in podzolic loamy soils against natural reforestation after spruce forest cutting. The studies were conducted on the territory of the European North-East of Russia, in the middle taiga subzone (Komi Republic, Ust-Kulom region). The study materials were soil of undisturbed bilberry spruce forest (Sample Plot 1 (SP1)) and soils of different-aged tree stands where cutting activities took place in winter 2001/2002 (SP2) and 1969/1970 (SP3). Description of soils and vegetation cover on the plots is given in [1]. Low-molecular organic compounds in soil water extracts were identified by the method of gas chromatography mass-spectrometry [2, 3]. Finally, reforestationafterspruceforestcutting was found to be accompanied by different changes in soil chemical composition. In contrast with soils under undisturbed spruce forest, organic soil horizons under different-aged cuts decreased in organic carbon reserves and production of low-molecular organic compounds, changed in soil acidity. Within the soil series of SP1→SP2→SP3, the highest content of WOCs was identified for undisturbed spruce forest (738 mg kg-1 soil). In soils of coniferous-deciduous forests on SP1 and SP3, WOC content was 294 and 441 mg kg-1 soil, correspondingly. Soils at cuts decreased in concentration of any water-soluble low-molecular SOM components as low-molecular acids, alcohols, and carbohydrates. Structure of low-molecular WOCs in the study podzolic

Evaluation of cutting force uncertainty components in turning

DEFF Research Database (Denmark)

Axinte, Dragos Aurelian; Belluco, Walter; De Chiffre, Leonardo

2000-01-01

A procedure is proposed for the evaluation of those uncertainty components of a single cutting force measurement in turning that are related to the contributions of the dynamometer calibration and the cutting process itself. Based on an empirical model including errors form both sources......, the uncertainty for a single measurement of cutting force is presented, and expressions for the expected uncertainty vs. cutting parameters are proposed. This approach gives the possibility of evaluating cutting force uncertainty components in turning, for a defined range of cutting parameters, based on few...

Fruit, Vegetable and Dietary Carotenoid Intakes Explain Variation in Skin-Color in Young Caucasian Women: A Cross-Sectional Study

Directory of Open Access Journals (Sweden)

Kristine Pezdirc

2015-07-01

Full Text Available Fruit and vegetables contain carotenoid pigments, which accumulate in human skin, contributing to its yellowness. This effect has a beneficial impact on appearance. The aim was to evaluate associations between diet (fruit, vegetable and dietary carotenoid intakes and skin color in young women. Ninety-one Caucasian women (Median and Interquartile Range (IQR age 22.1 (18.1–29.1 years, BMI 22.9 (18.5–31.9 kg/m2 were recruited from the Hunter region (Australia. Fruit, vegetable and dietary carotenoid intakes were estimated by a validated food frequency questionnaire. Skin color was measured at nine body locations (sun exposed and unexposed sites using spectrophotometry. Multiple linear regression was used to assess the relationship between fruit and vegetable intakes and skin yellowness adjusting for known confounders. Higher combined fruit and vegetable intakes (β = 0.8, p = 0.017 were associated with higher overall skin yellowness values. Higher fruit combined fruit and vegetable intakes (β = 1.0, p = 0.004 were associated with increased unexposed skin yellowness. Combined fruit and vegetables plus dietary carotenoid intakes contribute to skin yellowness in young Caucasian women. Evaluation of interventions using improvements in appearance as an incentive for increasing fruit and vegetable consumption in young women is warranted.

Identification of the critical depth-of-cut through a 2D image of the cutting region resulting from taper cutting of brittle materials

Science.gov (United States)

Gu, Wen; Zhu, Zhiwei; Zhu, Wu-Le; Lu, Leyao; To, Suet; Xiao, Gaobo

2018-05-01

An automatic identification method for obtaining the critical depth-of-cut (DoC) of brittle materials with nanometric accuracy and sub-nanometric uncertainty is proposed in this paper. With this method, a two-dimensional (2D) microscopic image of the taper cutting region is captured and further processed by image analysis to extract the margin of generated micro-cracks in the imaging plane. Meanwhile, an analytical model is formulated to describe the theoretical curve of the projected cutting points on the imaging plane with respect to a specified DoC during the whole cutting process. By adopting differential evolution algorithm-based minimization, the critical DoC can be identified by minimizing the deviation between the extracted margin and the theoretical curve. The proposed method is demonstrated through both numerical simulation and experimental analysis. Compared with conventional 2D- and 3D-microscopic-image-based methods, determination of the critical DoC in this study uses the envelope profile rather than the onset point of the generated cracks, providing a more objective approach with smaller uncertainty.

Craterlike structures on the laser cut surface

Science.gov (United States)

Shulyatyev, V. B.; Orishich, A. M.

2017-10-01

Analysis of the laser cut surface morphology remain topical. It is related with the fact that the surface roughness is the main index of the cut quality. The present paper deals with the experimental study of the relatively unstudied type of defects on the laser cut surface, dimples, or craters. According to the measurement results, amount of craters per unit of the laser cut surface area rises as the sheet thickness rises. The crater diameter rises together with the sheet thickness and distance from the upper sheet edge. The obtained data permit concluding that the defects like craters are observed predominantly in the case of thick sheets. The results agree with the hypothesis of crater formation as impact structures resulting from the melt drops getting on the cut channel walls upon separation from the cut front by the gas flow.

Regional vegetation dynamics and its response to climate change—a case study in the Tao River Basin in Northwestern China

International Nuclear Information System (INIS)

Li, Changbin; Yang, Linshan; Wang, Shuaibing; Yang, Wenjin; Zhu, Gaofeng; Qi, Jiaguo; Zou, Songbing; Zhang, Feng

2014-01-01

The 30-year normalized-difference vegetation index (NDVI) time series from AVHRR/MODIS satellite sensors was used in this study to assess the regional vegetation dynamic changes in the Tao River Basin, which cuts across the Eastern Tibetan Plateau (ETP) and the Southwestern Loess Plateau (SLP). First, principal component and correlation analyses were carried out to determine the key climatic variables driving ecological change in the region. Then, regression models were tested to correlate NDVI with the selected climatic variables to determine their predictive power. Finally, Sen’s slope method was used to determine how terrestrial vegetation has responded to regional climate change in the region. The results indicated an average winter season NDVI value of 0.14 in the ETP but only 0.04 in the SLP. Primarily driven by increasing temperature, vegetation growth has generally been enhanced since 1981; spring NDVI increased by 0.03 every 10 years in the ETP and 0.02 in the SLP. Further, results from trend analyses suggest vegetation growth in the ETP shifted to earlier-start and earlier-end dates, however in the SLP, the growing season has been extended with an earlier-start and later-end date. The precipitation threshold for vegetation germination, measured by the cumulative spring rainfall, was found to be 44 mm for both the ETP and SLP. (paper)

A Spiral in the Heart: Mitral Valve Endocarditis with Unusual Vegetation Shape Potentially Affecting Effectiveness of Antibiotic Therapy

Directory of Open Access Journals (Sweden)

Veronica Fibbi

2015-01-01

Full Text Available We report an unusual case of infective endocarditis (IE in an 88-year-old woman, occurring on a prolapsing mitral valve and characterized by an atypical vegetation shape resembling a spiral-like appearance. After the patient refused surgical correction, persistent IE despite prolonged antibiotic therapy was observed, resulting in an ischemic stroke probably secondary to septic embolus. The importance of vegetation shape in the management of patients with IE was classically related to the increased risk of embolization associated with pedunculated, irregular, and multilobed masses. We hypothesize that the unusual spiral-like vegetation shape in our patient may have favored IE persistence by two mechanisms, namely, a decrease of the exposed vegetation surface with creation of an internal core where the penetration of antimicrobial agents was obstacled and the creation of blood turbulence within the vegetation preventing a prolonged contact with circulating antibiotics. These considerations suggest that vegetation shape might be considered of importance in patients with IE not only because of its classical association with embolization risk, but also because of its potential effect on the efficacy of antibiotic therapy.

The Gesso Cut for Printmaking

Science.gov (United States)

Kelly, Perry; Sarvis, Alva

1969-01-01

Directions are given for the preparation, cutting, and printing of a gesso board. A gesso cut is defined as a board coated with gesso into which a design has been impressed. The process is similar to the woodcut, but offers greater textural possibilities. (BF)

Laser cutting of Kevlar laminates

Energy Technology Data Exchange (ETDEWEB)

VanCleave, R.A.

1977-09-01

An investigation has been conducted of the use of laser energy for cutting contours, diameters, and holes in flat and shaped Kevlar 49 fiber-reinforced epoxy laminates as an alternate to conventional machining. The investigation has shown that flat laminates 6.35 mm thick may be cut without backup by using a high-powered (1000-watt) continuous wave CO/sub 2/ laser at high feedrates (33.87 mm per second). The cut produced was free of the burrs and delaminations resulting from conventional machining methods without intimate contact backup. In addition, the process cycle time was greatly reduced.

Occurrence of hepatitis A and E and norovirus GI and GII in ready-to-eat vegetables in Italy.

Science.gov (United States)

Terio, V; Bottaro, M; Pavoni, E; Losio, M N; Serraino, A; Giacometti, F; Martella, V; Mottola, A; Di Pinto, A; Tantillo, G

2017-05-16

Fresh vegetables and their ready-to-eat (RTE) salads have become increasingly recognized as potential vehicles for foodborne diseases. The EU Reg. 1441/2007 establishes microbiological criteria for bacterial pathogens for products placed on the market during their shelf-life (i.e. Salmonella spp., Listeria monocytogenes) for pre-cut fruits and vegetables (RTE) whilst it does not address the problem of contamination by enteric viruses. In this study we investigated the contamination by hepatitis A virus (HAV), hepatitis E virus (HEV) and norovirus (NoV) in 911 ready-to-eat vegetable samples taken from products at retail in Apulia and in Lombardia. The vegetable samples were tested using validated real-time PCR (RT-qPCR) assays, ISO standardized virological methods and ISO culturing methods for bacteriological analysis. The total prevalence of HAV and HEV was 1.9% (18/911) and 0.6% (6/911), respectively. None of the samples analysed in this study was positive for NoV, Salmonella spp. or Listeria monocytogenes. The detection of HAV and HEV in RTE salads highlights a risk to consumers and the need to improve production hygiene. Appropriate implementation of hygiene procedures is required at all the steps of the RTE vegetable production chain and this should include monitoring of emerging viral pathogens. Copyright © 2017. Published by Elsevier B.V.